From 099f53cb50e45ef617a9f1d63ceec799e489418b Mon Sep 17 00:00:00 2001
From: Dan Williams <dan.j.williams@intel.com>
Date: Wed, 8 Apr 2009 14:28:37 -0700
Subject: async_tx: rename zero_sum to val

'zero_sum' does not properly describe the operation of generating parity
and checking that it validates against an existing buffer.  Change the
name of the operation to 'val' (for 'validate').  This is in
anticipation of the p+q case where it is a requirement to identify the
target parity buffers separately from the source buffers, because the
target parity buffers will not have corresponding pq coefficients.

Reviewed-by: Andre Noll <maan@systemlinux.org>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 arch/arm/mach-iop13xx/setup.c | 8 ++++----
 arch/arm/plat-iop/adma.c      | 2 +-
 2 files changed, 5 insertions(+), 5 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c
index cfd4d2e6dac..9800228b71d 100644
--- a/arch/arm/mach-iop13xx/setup.c
+++ b/arch/arm/mach-iop13xx/setup.c
@@ -478,7 +478,7 @@ void __init iop13xx_platform_init(void)
 			dma_cap_set(DMA_MEMCPY, plat_data->cap_mask);
 			dma_cap_set(DMA_XOR, plat_data->cap_mask);
 			dma_cap_set(DMA_DUAL_XOR, plat_data->cap_mask);
-			dma_cap_set(DMA_ZERO_SUM, plat_data->cap_mask);
+			dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask);
 			dma_cap_set(DMA_MEMSET, plat_data->cap_mask);
 			dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask);
 			dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask);
@@ -490,7 +490,7 @@ void __init iop13xx_platform_init(void)
 			dma_cap_set(DMA_MEMCPY, plat_data->cap_mask);
 			dma_cap_set(DMA_XOR, plat_data->cap_mask);
 			dma_cap_set(DMA_DUAL_XOR, plat_data->cap_mask);
-			dma_cap_set(DMA_ZERO_SUM, plat_data->cap_mask);
+			dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask);
 			dma_cap_set(DMA_MEMSET, plat_data->cap_mask);
 			dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask);
 			dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask);
@@ -502,13 +502,13 @@ void __init iop13xx_platform_init(void)
 			dma_cap_set(DMA_MEMCPY, plat_data->cap_mask);
 			dma_cap_set(DMA_XOR, plat_data->cap_mask);
 			dma_cap_set(DMA_DUAL_XOR, plat_data->cap_mask);
-			dma_cap_set(DMA_ZERO_SUM, plat_data->cap_mask);
+			dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask);
 			dma_cap_set(DMA_MEMSET, plat_data->cap_mask);
 			dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask);
 			dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask);
 			dma_cap_set(DMA_PQ_XOR, plat_data->cap_mask);
 			dma_cap_set(DMA_PQ_UPDATE, plat_data->cap_mask);
-			dma_cap_set(DMA_PQ_ZERO_SUM, plat_data->cap_mask);
+			dma_cap_set(DMA_PQ_VAL, plat_data->cap_mask);
 			break;
 		}
 	}
diff --git a/arch/arm/plat-iop/adma.c b/arch/arm/plat-iop/adma.c
index f7242082161..c0400440e21 100644
--- a/arch/arm/plat-iop/adma.c
+++ b/arch/arm/plat-iop/adma.c
@@ -198,7 +198,7 @@ static int __init iop3xx_adma_cap_init(void)
 	dma_cap_set(DMA_INTERRUPT, iop3xx_aau_data.cap_mask);
 	#else
 	dma_cap_set(DMA_XOR, iop3xx_aau_data.cap_mask);
-	dma_cap_set(DMA_ZERO_SUM, iop3xx_aau_data.cap_mask);
+	dma_cap_set(DMA_XOR_VAL, iop3xx_aau_data.cap_mask);
 	dma_cap_set(DMA_MEMSET, iop3xx_aau_data.cap_mask);
 	dma_cap_set(DMA_INTERRUPT, iop3xx_aau_data.cap_mask);
 	#endif
-- 
cgit v1.2.3


From 405d967dc70002991f8fc35c20e0d3cbc7614f63 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 24 Jun 2009 15:13:38 +0900
Subject: linker script: throw away .discard section

x86 throws away .discard section but no other archs do.  Also,
.discard is not thrown away while linking modules.  Make every arch
and module linking throw it away.  This will be used to define dummy
variables for percpu declarations and definitions.

This patch is based on Ivan Kokshaysky's alpha percpu patch.

[ Impact: always throw away everything in .discard ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Bryan Wu <cooloney@kernel.org>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
---
 arch/arm/kernel/vmlinux.lds.S | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 6c077979254..e256c57b898 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -82,6 +82,7 @@ SECTIONS
 		EXIT_TEXT
 		EXIT_DATA
 		*(.exitcall.exit)
+		*(.discard)
 		*(.ARM.exidx.exit.text)
 		*(.ARM.extab.exit.text)
 #ifndef CONFIG_MMU
-- 
cgit v1.2.3


From 702b59e623c3ca80beaeab79ca5ede4ea23170e2 Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Fri, 26 Jun 2009 21:36:36 +0100
Subject: [ARM] 5573/1: ep93xx: ensure typesafe io

ARM: ep93xx: ensure typesafe io

For the ep93xx platform, all EP93XX_*_BASE defines are based
on virtual addresses.  Ensure that all these defines are
properly typesafe for the __raw_{read/write}* macros.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h | 61 +++++++++++++------------
 arch/arm/mach-ep93xx/include/mach/io.h          | 17 ++++++-
 2 files changed, 47 insertions(+), 31 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index 967c079180d..49b256b3ddf 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -52,40 +52,43 @@
 #define EP93XX_AHB_VIRT_BASE		0xfef00000
 #define EP93XX_AHB_SIZE			0x00100000
 
+#define EP93XX_AHB_IOMEM(x)		IOMEM(EP93XX_AHB_VIRT_BASE + (x))
+
 #define EP93XX_APB_PHYS_BASE		0x80800000
 #define EP93XX_APB_VIRT_BASE		0xfed00000
 #define EP93XX_APB_SIZE			0x00200000
 
+#define EP93XX_APB_IOMEM(x)		IOMEM(EP93XX_APB_VIRT_BASE + (x))
+
 
 /* AHB peripherals */
-#define EP93XX_DMA_BASE			((void __iomem *)		\
-					 (EP93XX_AHB_VIRT_BASE + 0x00000000))
+#define EP93XX_DMA_BASE			EP93XX_AHB_IOMEM(0x00000000)
 
-#define EP93XX_ETHERNET_BASE		(EP93XX_AHB_VIRT_BASE + 0x00010000)
 #define EP93XX_ETHERNET_PHYS_BASE	(EP93XX_AHB_PHYS_BASE + 0x00010000)
+#define EP93XX_ETHERNET_BASE		EP93XX_AHB_IOMEM(0x00010000)
 
-#define EP93XX_USB_BASE			(EP93XX_AHB_VIRT_BASE + 0x00020000)
 #define EP93XX_USB_PHYS_BASE		(EP93XX_AHB_PHYS_BASE + 0x00020000)
+#define EP93XX_USB_BASE			EP93XX_AHB_IOMEM(0x00020000)
 
-#define EP93XX_RASTER_BASE		(EP93XX_AHB_VIRT_BASE + 0x00030000)
+#define EP93XX_RASTER_BASE		EP93XX_AHB_IOMEM(0x00030000)
 
-#define EP93XX_GRAPHICS_ACCEL_BASE	(EP93XX_AHB_VIRT_BASE + 0x00040000)
+#define EP93XX_GRAPHICS_ACCEL_BASE	EP93XX_AHB_IOMEM(0x00040000)
 
-#define EP93XX_SDRAM_CONTROLLER_BASE	(EP93XX_AHB_VIRT_BASE + 0x00060000)
+#define EP93XX_SDRAM_CONTROLLER_BASE	EP93XX_AHB_IOMEM(0x00060000)
 
-#define EP93XX_PCMCIA_CONTROLLER_BASE	(EP93XX_AHB_VIRT_BASE + 0x00080000)
+#define EP93XX_PCMCIA_CONTROLLER_BASE	EP93XX_AHB_IOMEM(0x00080000)
 
-#define EP93XX_BOOT_ROM_BASE		(EP93XX_AHB_VIRT_BASE + 0x00090000)
+#define EP93XX_BOOT_ROM_BASE		EP93XX_AHB_IOMEM(0x00090000)
 
-#define EP93XX_IDE_BASE			(EP93XX_AHB_VIRT_BASE + 0x000a0000)
+#define EP93XX_IDE_BASE			EP93XX_AHB_IOMEM(0x000a0000)
 
-#define EP93XX_VIC1_BASE		(EP93XX_AHB_VIRT_BASE + 0x000b0000)
+#define EP93XX_VIC1_BASE		EP93XX_AHB_IOMEM(0x000b0000)
 
-#define EP93XX_VIC2_BASE		(EP93XX_AHB_VIRT_BASE + 0x000c0000)
+#define EP93XX_VIC2_BASE		EP93XX_AHB_IOMEM(0x000c0000)
 
 
 /* APB peripherals */
-#define EP93XX_TIMER_BASE		(EP93XX_APB_VIRT_BASE + 0x00010000)
+#define EP93XX_TIMER_BASE		EP93XX_APB_IOMEM(0x00010000)
 #define EP93XX_TIMER_REG(x)		(EP93XX_TIMER_BASE + (x))
 #define EP93XX_TIMER1_LOAD		EP93XX_TIMER_REG(0x00)
 #define EP93XX_TIMER1_VALUE		EP93XX_TIMER_REG(0x04)
@@ -102,11 +105,11 @@
 #define EP93XX_TIMER3_CONTROL		EP93XX_TIMER_REG(0x88)
 #define EP93XX_TIMER3_CLEAR		EP93XX_TIMER_REG(0x8c)
 
-#define EP93XX_I2S_BASE			(EP93XX_APB_VIRT_BASE + 0x00020000)
+#define EP93XX_I2S_BASE			EP93XX_APB_IOMEM(0x00020000)
 
-#define EP93XX_SECURITY_BASE		(EP93XX_APB_VIRT_BASE + 0x00030000)
+#define EP93XX_SECURITY_BASE		EP93XX_APB_IOMEM(0x00030000)
 
-#define EP93XX_GPIO_BASE		(EP93XX_APB_VIRT_BASE + 0x00040000)
+#define EP93XX_GPIO_BASE		EP93XX_APB_IOMEM(0x00040000)
 #define EP93XX_GPIO_REG(x)		(EP93XX_GPIO_BASE + (x))
 #define EP93XX_GPIO_F_INT_TYPE1		EP93XX_GPIO_REG(0x4c)
 #define EP93XX_GPIO_F_INT_TYPE2		EP93XX_GPIO_REG(0x50)
@@ -124,32 +127,32 @@
 #define EP93XX_GPIO_B_INT_ENABLE	EP93XX_GPIO_REG(0xb8)
 #define EP93XX_GPIO_B_INT_STATUS	EP93XX_GPIO_REG(0xbc)
 
-#define EP93XX_AAC_BASE			(EP93XX_APB_VIRT_BASE + 0x00080000)
+#define EP93XX_AAC_BASE			EP93XX_APB_IOMEM(0x00080000)
 
-#define EP93XX_SPI_BASE			(EP93XX_APB_VIRT_BASE + 0x000a0000)
+#define EP93XX_SPI_BASE			EP93XX_APB_IOMEM(0x000a0000)
 
-#define EP93XX_IRDA_BASE		(EP93XX_APB_VIRT_BASE + 0x000b0000)
+#define EP93XX_IRDA_BASE		EP93XX_APB_IOMEM(0x000b0000)
 
-#define EP93XX_UART1_BASE		(EP93XX_APB_VIRT_BASE + 0x000c0000)
 #define EP93XX_UART1_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000c0000)
+#define EP93XX_UART1_BASE		EP93XX_APB_IOMEM(0x000c0000)
 
-#define EP93XX_UART2_BASE		(EP93XX_APB_VIRT_BASE + 0x000d0000)
 #define EP93XX_UART2_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000d0000)
+#define EP93XX_UART2_BASE		EP93XX_APB_IOMEM(0x000d0000)
 
-#define EP93XX_UART3_BASE		(EP93XX_APB_VIRT_BASE + 0x000e0000)
 #define EP93XX_UART3_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000e0000)
+#define EP93XX_UART3_BASE		EP93XX_APB_IOMEM(0x000e0000)
 
-#define EP93XX_KEY_MATRIX_BASE		(EP93XX_APB_VIRT_BASE + 0x000f0000)
+#define EP93XX_KEY_MATRIX_BASE		EP93XX_APB_IOMEM(0x000f0000)
 
-#define EP93XX_ADC_BASE			(EP93XX_APB_VIRT_BASE + 0x00100000)
-#define EP93XX_TOUCHSCREEN_BASE		(EP93XX_APB_VIRT_BASE + 0x00100000)
+#define EP93XX_ADC_BASE			EP93XX_APB_IOMEM(0x00100000)
+#define EP93XX_TOUCHSCREEN_BASE		EP93XX_APB_IOMEM(0x00100000)
 
-#define EP93XX_PWM_BASE			(EP93XX_APB_VIRT_BASE + 0x00110000)
+#define EP93XX_PWM_BASE			EP93XX_APB_IOMEM(0x00110000)
 
-#define EP93XX_RTC_BASE			(EP93XX_APB_VIRT_BASE + 0x00120000)
 #define EP93XX_RTC_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x00120000)
+#define EP93XX_RTC_BASE			EP93XX_APB_IOMEM(0x00120000)
 
-#define EP93XX_SYSCON_BASE		(EP93XX_APB_VIRT_BASE + 0x00130000)
+#define EP93XX_SYSCON_BASE		EP93XX_APB_IOMEM(0x00130000)
 #define EP93XX_SYSCON_REG(x)		(EP93XX_SYSCON_BASE + (x))
 #define EP93XX_SYSCON_POWER_STATE	EP93XX_SYSCON_REG(0x00)
 #define EP93XX_SYSCON_PWRCNT		EP93XX_SYSCON_REG(0x04)
@@ -179,7 +182,7 @@
 #define EP93XX_SYSCON_DEVICE_CONFIG_U1EN		(1<<18)
 #define EP93XX_SYSCON_SWLOCK		EP93XX_SYSCON_REG(0xc0)
 
-#define EP93XX_WATCHDOG_BASE		(EP93XX_APB_VIRT_BASE + 0x00140000)
+#define EP93XX_WATCHDOG_BASE		EP93XX_APB_IOMEM(0x00140000)
 
 
 #endif
diff --git a/arch/arm/mach-ep93xx/include/mach/io.h b/arch/arm/mach-ep93xx/include/mach/io.h
index fd5f081cc8b..cebcc1c53d6 100644
--- a/arch/arm/mach-ep93xx/include/mach/io.h
+++ b/arch/arm/mach-ep93xx/include/mach/io.h
@@ -1,8 +1,21 @@
 /*
  * arch/arm/mach-ep93xx/include/mach/io.h
  */
+#ifndef __ASM_MACH_IO_H
+#define __ASM_MACH_IO_H
 
 #define IO_SPACE_LIMIT		0xffffffff
 
-#define __io(p)		__typesafe_io(p)
-#define __mem_pci(p)	(p)
+#define __io(p)			__typesafe_io(p)
+#define __mem_pci(p)		(p)
+
+/*
+ * A typesafe __io() variation for variable initialisers
+ */
+#ifdef __ASSEMBLER__
+#define IOMEM(p)		p
+#else
+#define IOMEM(p)		((void __iomem __force *)(p))
+#endif
+
+#endif /* __ASM_MACH_IO_H */
-- 
cgit v1.2.3


From ddf4f3d994651ee2924432a618d9caefed411dc1 Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Fri, 26 Jun 2009 21:39:27 +0100
Subject: [ARM] 5574/1: ep93xx: gpio.c: fix header includes and __iomem
 pointers

Fix ep93xx gpio.c header includes and __iomem pointers.

  1. <linux/gpio.h> should be included instead of <asm/gpio.h>
  2. <mach/hardware.h> should be included instead of <mach/ep93xx-regs.h>
  3. data_reg and data_dir_reg in struct ep93xx_gpio_chip should be
     void __iomem pointers not unsigned int

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/gpio.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c
index 482cf3d2fbc..7b7a564916f 100644
--- a/arch/arm/mach-ep93xx/gpio.c
+++ b/arch/arm/mach-ep93xx/gpio.c
@@ -17,15 +17,15 @@
 #include <linux/module.h>
 #include <linux/seq_file.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
 
-#include <mach/ep93xx-regs.h>
-#include <asm/gpio.h>
+#include <mach/hardware.h>
 
 struct ep93xx_gpio_chip {
 	struct gpio_chip	chip;
 
-	unsigned int		data_reg;
-	unsigned int		data_dir_reg;
+	void __iomem		*data_reg;
+	void __iomem		*data_dir_reg;
 };
 
 #define to_ep93xx_gpio_chip(c) container_of(c, struct ep93xx_gpio_chip, chip)
-- 
cgit v1.2.3


From f04989bbf4a40077dc7ddcc3dccde11a5f3e91f2 Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Fri, 26 Jun 2009 21:40:34 +0100
Subject: [ARM] 5575/1: ep93xx: Show gpio interrupt type in debugfs output.

ep93xx: Show gpio interrupt type in debugfs output.

EP93xx uses a private implementation for the debugfs output.
Modify this output so it includes the interrupt type when the
gpio is configured as an interrupt

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/gpio.c | 56 +++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 51 insertions(+), 5 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c
index 7b7a564916f..2d83d69e2ee 100644
--- a/arch/arm/mach-ep93xx/gpio.c
+++ b/arch/arm/mach-ep93xx/gpio.c
@@ -111,15 +111,61 @@ static void ep93xx_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 {
 	struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
 	u8 data_reg, data_dir_reg;
-	int i;
+	int gpio, i;
 
 	data_reg = __raw_readb(ep93xx_chip->data_reg);
 	data_dir_reg = __raw_readb(ep93xx_chip->data_dir_reg);
 
-	for (i = 0; i < chip->ngpio; i++)
-		seq_printf(s, "GPIO %s%d: %s %s\n", chip->label, i,
-			   (data_reg & (1 << i)) ? "set" : "clear",
-			   (data_dir_reg & (1 << i)) ? "out" : "in");
+	gpio = ep93xx_chip->chip.base;
+	for (i = 0; i < chip->ngpio; i++, gpio++) {
+		int is_out = data_dir_reg & (1 << i);
+
+		seq_printf(s, " %s%d gpio-%-3d (%-12s) %s %s",
+				chip->label, i, gpio,
+				gpiochip_is_requested(chip, i) ? : "",
+				is_out ? "out" : "in ",
+				(data_reg & (1 << i)) ? "hi" : "lo");
+
+		if (!is_out) {
+			int irq = gpio_to_irq(gpio);
+			struct irq_desc *desc = irq_desc + irq;
+
+			if (irq >= 0 && desc->action) {
+				char *trigger;
+
+				switch (desc->status & IRQ_TYPE_SENSE_MASK) {
+				case IRQ_TYPE_NONE:
+					trigger = "(default)";
+					break;
+				case IRQ_TYPE_EDGE_FALLING:
+					trigger = "edge-falling";
+					break;
+				case IRQ_TYPE_EDGE_RISING:
+					trigger = "edge-rising";
+					break;
+				case IRQ_TYPE_EDGE_BOTH:
+					trigger = "edge-both";
+					break;
+				case IRQ_TYPE_LEVEL_HIGH:
+					trigger = "level-high";
+					break;
+				case IRQ_TYPE_LEVEL_LOW:
+					trigger = "level-low";
+					break;
+				default:
+					trigger = "?trigger?";
+					break;
+				}
+
+				seq_printf(s, " irq-%d %s%s",
+						irq, trigger,
+						(desc->status & IRQ_WAKEUP)
+							? " wakeup" : "");
+			}
+		}
+
+		seq_printf(s, "\n");
+	}
 }
 
 #define EP93XX_GPIO_BANK(name, dr, ddr, base_gpio)			\
-- 
cgit v1.2.3


From 226ddb9833a3c2f1087bfac70659d8e318d3c31f Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Wed, 24 Jun 2009 17:13:47 +0100
Subject: [ARM] 5564/1: at91: add gpio button and leds support for at91sam9rlek

This adds input keyboard gpio support on at91sam9rlek board. It adds button 1
and 2 (left and right click).
It also adds gpio leds ds1, ds2 and ds3.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/board-sam9rlek.c | 79 +++++++++++++++++++++++++++++++++++++
 1 file changed, 79 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 35e12a49d1a..9120d5d3a6f 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -15,6 +15,8 @@
 #include <linux/spi/spi.h>
 #include <linux/fb.h>
 #include <linux/clk.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
 
 #include <video/atmel_lcdc.h>
 
@@ -206,6 +208,79 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data;
 #endif
 
 
+/*
+ * LEDs
+ */
+static struct gpio_led ek_leds[] = {
+	{	/* "bottom" led, green, userled1 to be defined */
+		.name			= "ds1",
+		.gpio			= AT91_PIN_PD15,
+		.active_low		= 1,
+		.default_trigger	= "none",
+	},
+	{	/* "bottom" led, green, userled2 to be defined */
+		.name			= "ds2",
+		.gpio			= AT91_PIN_PD16,
+		.active_low		= 1,
+		.default_trigger	= "none",
+	},
+	{	/* "power" led, yellow */
+		.name			= "ds3",
+		.gpio			= AT91_PIN_PD14,
+		.default_trigger	= "heartbeat",
+	}
+};
+
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+	{
+		.gpio		= AT91_PIN_PB0,
+		.code		= BTN_2,
+		.desc		= "Right Click",
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+	{
+		.gpio		= AT91_PIN_PB1,
+		.code		= BTN_1,
+		.desc		= "Left Click",
+		.active_low	= 1,
+		.wakeup		= 1,
+	}
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+	.buttons	= ek_buttons,
+	.nbuttons	= ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &ek_button_data,
+	}
+};
+
+static void __init ek_add_device_buttons(void)
+{
+	at91_set_gpio_input(AT91_PIN_PB1, 1);	/* btn1 */
+	at91_set_deglitch(AT91_PIN_PB1, 1);
+	at91_set_gpio_input(AT91_PIN_PB0, 1);	/* btn2 */
+	at91_set_deglitch(AT91_PIN_PB0, 1);
+
+	platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+
 static void __init ek_board_init(void)
 {
 	/* Serial */
@@ -224,6 +299,10 @@ static void __init ek_board_init(void)
 	at91_add_device_lcdc(&ek_lcdc_data);
 	/* Touch Screen Controller */
 	at91_add_device_tsadcc();
+	/* LEDs */
+	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+	/* Push Buttons */
+	ek_add_device_buttons();
 }
 
 MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
-- 
cgit v1.2.3


From 7c6425a0404399ba78852ef4108007ecf51ef3dc Mon Sep 17 00:00:00 2001
From: Ryan Mallon <ryan@bluewatersys.com>
Date: Wed, 24 Jun 2009 23:15:23 +0100
Subject: [ARM] 5566/1: Remove at91_gpiolib_request

Remove at91_gpiolib_request. It returns -EPERM if a request pin is not
in GPIO mode, however we want to be able to gpio_request alternative
function pins to reserve them, and in some cases we need to be able to
use the gpiolib functions on alternative function pins.

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/gpio.c | 15 ---------------
 1 file changed, 15 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index f2236f0e101..ae4772e744a 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -44,13 +44,11 @@ static int at91_gpiolib_direction_output(struct gpio_chip *chip,
 					 unsigned offset, int val);
 static int at91_gpiolib_direction_input(struct gpio_chip *chip,
 					unsigned offset);
-static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset);
 
 #define AT91_GPIO_CHIP(name, base_gpio, nr_gpio)			\
 	{								\
 		.chip = {						\
 			.label		  = name,			\
-			.request	  = at91_gpiolib_request,	\
 			.direction_input  = at91_gpiolib_direction_input, \
 			.direction_output = at91_gpiolib_direction_output, \
 			.get		  = at91_gpiolib_get,		\
@@ -588,19 +586,6 @@ static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val)
 	__raw_writel(mask, pio + (val ? PIO_SODR : PIO_CODR));
 }
 
-static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset)
-{
-	unsigned pin = chip->base + offset;
-	void __iomem *pio = pin_to_controller(pin);
-	unsigned mask = pin_to_mask(pin);
-
-	/* Cannot request GPIOs that are in alternate function mode */
-	if (!(__raw_readl(pio + PIO_PSR) & mask))
-		return -EPERM;
-
-	return 0;
-}
-
 static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 {
 	int i;
-- 
cgit v1.2.3


From 2ef9df7ada6b6dd53446a994ef6e3a6ad5a300ef Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 26 Jun 2009 15:36:57 +0100
Subject: [ARM] 5569/1: at91: Support for at91sam9g45: clocks management

Add the at91sam9g45 series support to the AT91 generic clock file.
This takes care of the particularities of the PMC for this series.
It also takes advantage of the management by functionalities of
those PLLs and clocks.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/clock.c | 62 ++++++++++++++++++++++++++++++++++++++--------
 1 file changed, 52 insertions(+), 10 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index bac578fe0d3..6396680271e 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -47,20 +47,25 @@
  * Chips have some kind of clocks : group them by functionality
  */
 #define cpu_has_utmi()		(  cpu_is_at91cap9() \
-				|| cpu_is_at91sam9rl())
+				|| cpu_is_at91sam9rl() \
+				|| cpu_is_at91sam9g45())
 
-#define cpu_has_800M_plla()	(cpu_is_at91sam9g20())
+#define cpu_has_800M_plla()	(  cpu_is_at91sam9g20() \
+				|| cpu_is_at91sam9g45())
 
-#define cpu_has_pllb()		(!cpu_is_at91sam9rl())
+#define cpu_has_300M_plla()	(0)
 
-#define cpu_has_upll()		(0)
+#define cpu_has_pllb()		(!(cpu_is_at91sam9rl() \
+				|| cpu_is_at91sam9g45()))
+
+#define cpu_has_upll()		(cpu_is_at91sam9g45())
 
 /* USB host HS & FS */
 #define cpu_has_uhp()		(!cpu_is_at91sam9rl())
 
 /* USB device FS only */
-#define cpu_has_udpfs()		(!cpu_is_at91sam9rl())
-
+#define cpu_has_udpfs()		(!(cpu_is_at91sam9rl() \
+				|| cpu_is_at91sam9g45()))
 
 static LIST_HEAD(clocks);
 static DEFINE_SPINLOCK(clk_lock);
@@ -133,6 +138,13 @@ static void pmc_uckr_mode(struct clk *clk, int is_on)
 {
 	unsigned int uckr = at91_sys_read(AT91_CKGR_UCKR);
 
+	if (cpu_is_at91sam9g45()) {
+		if (is_on)
+			uckr |= AT91_PMC_BIASEN;
+		else
+			uckr &= ~AT91_PMC_BIASEN;
+	}
+
 	if (is_on) {
 		is_on = AT91_PMC_LOCKU;
 		at91_sys_write(AT91_CKGR_UCKR, uckr | clk->pmc_mask);
@@ -310,6 +322,7 @@ long clk_round_rate(struct clk *clk, unsigned long rate)
 	unsigned long	flags;
 	unsigned	prescale;
 	unsigned long	actual;
+	unsigned long	prev = ULONG_MAX;
 
 	if (!clk_is_programmable(clk))
 		return -EINVAL;
@@ -317,8 +330,16 @@ long clk_round_rate(struct clk *clk, unsigned long rate)
 
 	actual = clk->parent->rate_hz;
 	for (prescale = 0; prescale < 7; prescale++) {
-		if (actual && actual <= rate)
+		if (actual > rate)
+			prev = actual;
+
+		if (actual && actual <= rate) {
+			if ((prev - rate) < (rate - actual)) {
+				actual = prev;
+				prescale--;
+			}
 			break;
+		}
 		actual >>= 1;
 	}
 
@@ -373,6 +394,10 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 		return -EBUSY;
 	if (!clk_is_primary(parent) || !clk_is_programmable(clk))
 		return -EINVAL;
+
+	if (cpu_is_at91sam9rl() && parent->id == AT91_PMC_CSS_PLLB)
+		return -EINVAL;
+
 	spin_lock_irqsave(&clk_lock, flags);
 
 	clk->rate_hz = parent->rate_hz;
@@ -637,6 +662,7 @@ int __init at91_clock_init(unsigned long main_clock)
 {
 	unsigned tmp, freq, mckr;
 	int i;
+	int pll_overclock = false;
 
 	/*
 	 * When the bootloader initialized the main oscillator correctly,
@@ -654,12 +680,25 @@ int __init at91_clock_init(unsigned long main_clock)
 
 	/* report if PLLA is more than mildly overclocked */
 	plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_sys_read(AT91_CKGR_PLLAR));
-	if ((!cpu_has_800M_plla() && plla.rate_hz > 209000000)
-	   || (cpu_has_800M_plla() && plla.rate_hz > 800000000))
+	if (cpu_has_300M_plla()) {
+		if (plla.rate_hz > 300000000)
+			pll_overclock = true;
+	} else if (cpu_has_800M_plla()) {
+		if (plla.rate_hz > 800000000)
+			pll_overclock = true;
+	} else {
+		if (plla.rate_hz > 209000000)
+			pll_overclock = true;
+	}
+	if (pll_overclock)
 		pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
 
+	if (cpu_is_at91sam9g45()) {
+		mckr = at91_sys_read(AT91_PMC_MCKR);
+		plla.rate_hz /= (1 << ((mckr & AT91_PMC_PLLADIV2) >> 12));	/* plla divisor by 2 */
+	}
 
-	if (cpu_has_upll() && !cpu_has_pllb()) {
+	if (!cpu_has_pllb() && cpu_has_upll()) {
 		/* setup UTMI clock as the fourth primary clock
 		 * (instead of pllb) */
 		utmi_clk.type |= CLK_TYPE_PRIMARY;
@@ -701,6 +740,9 @@ int __init at91_clock_init(unsigned long main_clock)
 			freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq;	/* mdiv ; (x >> 7) = ((x >> 8) * 2) */
 		if (mckr & AT91_PMC_PDIV)
 			freq /= 2;		/* processor clock division */
+	} else if (cpu_is_at91sam9g45()) {
+		mck.rate_hz = (mckr & AT91_PMC_MDIV) == AT91SAM9_PMC_MDIV_3 ?
+			freq / 3 : freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8));	/* mdiv */
 	} else {
 		mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8));      /* mdiv */
 	}
-- 
cgit v1.2.3


From fddcc0ae58edefeb7ac1e460411d7dfbe8ebdacc Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 26 Jun 2009 15:36:56 +0100
Subject: [ARM] 5571/1: at91: Basic support for at91sam9g45 series: header
 files.

AT91sam9g45 series is an ARM 926ej-s SOC family clocked at 400/133MHz.
It embedds USB high speed host and device, LCD, DDR2 RAM, and a full set of
peripherals.

Here is the basic header file support for this product series.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/include/mach/at91sam9g45.h      | 138 +++++++++++++++++++
 .../mach-at91/include/mach/at91sam9g45_matrix.h    | 153 +++++++++++++++++++++
 arch/arm/mach-at91/include/mach/cpu.h              |  16 +++
 arch/arm/mach-at91/include/mach/hardware.h         |   2 +
 arch/arm/mach-at91/include/mach/timex.h            |   5 +
 5 files changed, 314 insertions(+)
 create mode 100644 arch/arm/mach-at91/include/mach/at91sam9g45.h
 create mode 100644 arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h

(limited to 'arch/arm')

diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
new file mode 100644
index 00000000000..2c42cf5f0c5
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
@@ -0,0 +1,138 @@
+/*
+ * Chip-specific header file for the AT91SAM9G45 family
+ *
+ *  Copyright (C) 2008-2009 Atmel Corporation.
+ *
+ * Common definitions.
+ * Based on AT91SAM9G45 preliminary datasheet.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9G45_H
+#define AT91SAM9G45_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Controller Interrupt */
+#define AT91SAM9G45_ID_PIOA	2	/* Parallel I/O Controller A */
+#define AT91SAM9G45_ID_PIOB	3	/* Parallel I/O Controller B */
+#define AT91SAM9G45_ID_PIOC	4	/* Parallel I/O Controller C */
+#define AT91SAM9G45_ID_PIODE	5	/* Parallel I/O Controller D and E */
+#define AT91SAM9G45_ID_TRNG	6	/* True Random Number Generator */
+#define AT91SAM9G45_ID_US0	7	/* USART 0 */
+#define AT91SAM9G45_ID_US1	8	/* USART 1 */
+#define AT91SAM9G45_ID_US2	9	/* USART 2 */
+#define AT91SAM9G45_ID_US3	10	/* USART 3 */
+#define AT91SAM9G45_ID_MCI0	11	/* High Speed Multimedia Card Interface 0 */
+#define AT91SAM9G45_ID_TWI0	12	/* Two-Wire Interface 0 */
+#define AT91SAM9G45_ID_TWI1	13	/* Two-Wire Interface 1 */
+#define AT91SAM9G45_ID_SPI0	14	/* Serial Peripheral Interface 0 */
+#define AT91SAM9G45_ID_SPI1	15	/* Serial Peripheral Interface 1 */
+#define AT91SAM9G45_ID_SSC0	16	/* Synchronous Serial Controller 0 */
+#define AT91SAM9G45_ID_SSC1	17	/* Synchronous Serial Controller 1 */
+#define AT91SAM9G45_ID_TCB	18	/* Timer Counter 0, 1, 2, 3, 4 and 5 */
+#define AT91SAM9G45_ID_PWMC	19	/* Pulse Width Modulation Controller */
+#define AT91SAM9G45_ID_TSC	20	/* Touch Screen ADC Controller */
+#define AT91SAM9G45_ID_DMA	21	/* DMA Controller */
+#define AT91SAM9G45_ID_UHPHS	22	/* USB Host High Speed */
+#define AT91SAM9G45_ID_LCDC	23	/* LCD Controller */
+#define AT91SAM9G45_ID_AC97C	24	/* AC97 Controller */
+#define AT91SAM9G45_ID_EMAC	25	/* Ethernet MAC */
+#define AT91SAM9G45_ID_ISI	26	/* Image Sensor Interface */
+#define AT91SAM9G45_ID_UDPHS	27	/* USB Device High Speed */
+#define AT91SAM9G45_ID_AESTDESSHA 28	/* AES + T-DES + SHA */
+#define AT91SAM9G45_ID_MCI1	29	/* High Speed Multimedia Card Interface 1 */
+#define AT91SAM9G45_ID_VDEC	30	/* Video Decoder */
+#define AT91SAM9G45_ID_IRQ0	31	/* Advanced Interrupt Controller */
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9G45_BASE_UDPHS		0xfff78000
+#define AT91SAM9G45_BASE_TCB0		0xfff7c000
+#define AT91SAM9G45_BASE_TC0		0xfff7c000
+#define AT91SAM9G45_BASE_TC1		0xfff7c040
+#define AT91SAM9G45_BASE_TC2		0xfff7c080
+#define AT91SAM9G45_BASE_MCI0		0xfff80000
+#define AT91SAM9G45_BASE_TWI0		0xfff84000
+#define AT91SAM9G45_BASE_TWI1		0xfff88000
+#define AT91SAM9G45_BASE_US0		0xfff8c000
+#define AT91SAM9G45_BASE_US1		0xfff90000
+#define AT91SAM9G45_BASE_US2		0xfff94000
+#define AT91SAM9G45_BASE_US3		0xfff98000
+#define AT91SAM9G45_BASE_SSC0		0xfff9c000
+#define AT91SAM9G45_BASE_SSC1		0xfffa0000
+#define AT91SAM9G45_BASE_SPI0		0xfffa4000
+#define AT91SAM9G45_BASE_SPI1		0xfffa8000
+#define AT91SAM9G45_BASE_AC97C		0xfffac000
+#define AT91SAM9G45_BASE_TSC		0xfffb0000
+#define AT91SAM9G45_BASE_ISI		0xfffb4000
+#define AT91SAM9G45_BASE_PWMC		0xfffb8000
+#define AT91SAM9G45_BASE_EMAC		0xfffbc000
+#define AT91SAM9G45_BASE_AES		0xfffc0000
+#define AT91SAM9G45_BASE_TDES		0xfffc4000
+#define AT91SAM9G45_BASE_SHA		0xfffc8000
+#define AT91SAM9G45_BASE_TRNG		0xfffcc000
+#define AT91SAM9G45_BASE_MCI1		0xfffd0000
+#define AT91SAM9G45_BASE_TCB1		0xfffd4000
+#define AT91SAM9G45_BASE_TC3		0xfffd4000
+#define AT91SAM9G45_BASE_TC4		0xfffd4040
+#define AT91SAM9G45_BASE_TC5		0xfffd4080
+#define AT91_BASE_SYS			0xffffe200
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC	(0xffffe200 - AT91_BASE_SYS)
+#define AT91_DDRSDRC1	(0xffffe400 - AT91_BASE_SYS)
+#define AT91_DDRSDRC0	(0xffffe600 - AT91_BASE_SYS)
+#define AT91_SMC	(0xffffe800 - AT91_BASE_SYS)
+#define AT91_MATRIX	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_DMA	(0xffffec00 - AT91_BASE_SYS)
+#define AT91_DBGU	(0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
+#define AT91_PIOA	(0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOB	(0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOC	(0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOD	(0xfffff800 - AT91_BASE_SYS)
+#define AT91_PIOE	(0xfffffa00 - AT91_BASE_SYS)
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR	(0xfffffd60 - AT91_BASE_SYS)
+#define AT91_RTC	(0xfffffdb0 - AT91_BASE_SYS)
+
+#define AT91_USART0	AT91SAM9G45_BASE_US0
+#define AT91_USART1	AT91SAM9G45_BASE_US1
+#define AT91_USART2	AT91SAM9G45_BASE_US2
+#define AT91_USART3	AT91SAM9G45_BASE_US3
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9G45_SRAM_BASE	0x00300000	/* Internal SRAM base address */
+#define AT91SAM9G45_SRAM_SIZE	SZ_64K		/* Internal SRAM size (64Kb) */
+
+#define AT91SAM9G45_ROM_BASE	0x00400000	/* Internal ROM base address */
+#define AT91SAM9G45_ROM_SIZE	SZ_64K		/* Internal ROM size (64Kb) */
+
+#define AT91SAM9G45_LCDC_BASE	0x00500000	/* LCD Controller */
+#define AT91SAM9G45_UDPHS_FIFO	0x00600000	/* USB Device HS controller */
+#define AT91SAM9G45_OHCI_BASE	0x00700000	/* USB Host controller (OHCI) */
+#define AT91SAM9G45_EHCI_BASE	0x00800000	/* USB Host controller (EHCI) */
+#define AT91SAM9G45_VDEC_BASE	0x00900000	/* Video Decoder Controller */
+
+#define CONFIG_DRAM_BASE	AT91_CHIPSELECT_6
+
+#define CONSISTENT_DMA_SIZE	SZ_4M
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h
new file mode 100644
index 00000000000..c972d60e0ae
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h
@@ -0,0 +1,153 @@
+/*
+ * Matrix-centric header file for the AT91SAM9G45 family
+ *
+ *  Copyright (C) 2008-2009 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9G45 preliminary datasheet.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9G45_MATRIX_H
+#define AT91SAM9G45_MATRIX_H
+
+#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG6	(AT91_MATRIX + 0x18)	/* Master Configuration Register 6 */
+#define AT91_MATRIX_MCFG7	(AT91_MATRIX + 0x1C)	/* Master Configuration Register 7 */
+#define AT91_MATRIX_MCFG8	(AT91_MATRIX + 0x20)	/* Master Configuration Register 8 */
+#define AT91_MATRIX_MCFG9	(AT91_MATRIX + 0x24)	/* Master Configuration Register 9 */
+#define AT91_MATRIX_MCFG10	(AT91_MATRIX + 0x28)	/* Master Configuration Register 10 */
+#define AT91_MATRIX_MCFG11	(AT91_MATRIX + 0x2C)	/* Master Configuration Register 11 */
+#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
+#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
+#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
+#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
+#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
+#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
+#define			AT91_MATRIX_ULBT_THIRTYTWO	(5 << 0)
+#define			AT91_MATRIX_ULBT_SIXTYFOUR	(6 << 0)
+#define			AT91_MATRIX_ULBT_128		(7 << 0)
+
+#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5	(AT91_MATRIX + 0x54)	/* Slave Configuration Register 5 */
+#define AT91_MATRIX_SCFG6	(AT91_MATRIX + 0x58)	/* Slave Configuration Register 6 */
+#define AT91_MATRIX_SCFG7	(AT91_MATRIX + 0x5C)	/* Slave Configuration Register 7 */
+#define		AT91_MATRIX_SLOT_CYCLE		(0x1ff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
+#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
+#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define		AT91_MATRIX_FIXED_DEFMSTR	(0xf  << 18)	/* Fixed Index of Default Master */
+
+#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRBS0	(AT91_MATRIX + 0x84)	/* Priority Register B for Slave 0 */
+#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRBS1	(AT91_MATRIX + 0x8C)	/* Priority Register B for Slave 1 */
+#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRBS2	(AT91_MATRIX + 0x94)	/* Priority Register B for Slave 2 */
+#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRBS3	(AT91_MATRIX + 0x9C)	/* Priority Register B for Slave 3 */
+#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRBS4	(AT91_MATRIX + 0xA4)	/* Priority Register B for Slave 4 */
+#define AT91_MATRIX_PRAS5	(AT91_MATRIX + 0xA8)	/* Priority Register A for Slave 5 */
+#define AT91_MATRIX_PRBS5	(AT91_MATRIX + 0xAC)	/* Priority Register B for Slave 5 */
+#define AT91_MATRIX_PRAS6	(AT91_MATRIX + 0xB0)	/* Priority Register A for Slave 6 */
+#define AT91_MATRIX_PRBS6	(AT91_MATRIX + 0xB4)	/* Priority Register B for Slave 6 */
+#define AT91_MATRIX_PRAS7	(AT91_MATRIX + 0xB8)	/* Priority Register A for Slave 7 */
+#define AT91_MATRIX_PRBS7	(AT91_MATRIX + 0xBC)	/* Priority Register B for Slave 7 */
+#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
+#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
+#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
+#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
+#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
+#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
+#define		AT91_MATRIX_M6PR		(3 << 24)	/* Master 6 Priority */
+#define		AT91_MATRIX_M7PR		(3 << 28)	/* Master 7 Priority */
+#define		AT91_MATRIX_M8PR		(3 << 0)	/* Master 8 Priority (in Register B) */
+#define		AT91_MATRIX_M9PR		(3 << 4)	/* Master 9 Priority (in Register B) */
+#define		AT91_MATRIX_M10PR		(3 << 8)	/* Master 10 Priority (in Register B) */
+#define		AT91_MATRIX_M11PR		(3 << 12)	/* Master 11 Priority (in Register B) */
+
+#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
+#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define		AT91_MATRIX_RCB2		(1 << 2)
+#define		AT91_MATRIX_RCB3		(1 << 3)
+#define		AT91_MATRIX_RCB4		(1 << 4)
+#define		AT91_MATRIX_RCB5		(1 << 5)
+#define		AT91_MATRIX_RCB6		(1 << 6)
+#define		AT91_MATRIX_RCB7		(1 << 7)
+#define		AT91_MATRIX_RCB8		(1 << 8)
+#define		AT91_MATRIX_RCB9		(1 << 9)
+#define		AT91_MATRIX_RCB10		(1 << 10)
+#define		AT91_MATRIX_RCB11		(1 << 11)
+
+#define AT91_MATRIX_TCMR	(AT91_MATRIX + 0x110)	/* TCM Configuration Register */
+#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
+#define			AT91_MATRIX_ITCM_0		(0 << 0)
+#define			AT91_MATRIX_ITCM_32		(6 << 0)
+#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
+#define			AT91_MATRIX_DTCM_0		(0 << 4)
+#define			AT91_MATRIX_DTCM_32		(6 << 4)
+#define			AT91_MATRIX_DTCM_64		(7 << 4)
+#define		AT91_MATRIX_TCM_NWS		(0x1 << 11)	/* Wait state TCM register */
+#define			AT91_MATRIX_TCM_NO_WS		(0x0 << 11)
+#define			AT91_MATRIX_TCM_ONE_WS		(0x1 << 11)
+
+#define AT91_MATRIX_VIDEO	(AT91_MATRIX + 0x118)	/* Video Mode Configuration Register */
+#define		AT91C_VDEC_SEL			(0x1 <<  0) /* Video Mode Selection */
+#define			AT91C_VDEC_SEL_OFF		(0 << 0)
+#define			AT91C_VDEC_SEL_ON		(1 << 0)
+
+#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x128)	/* EBI Chip Select Assignment Register */
+#define		AT91_MATRIX_EBI_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_EBI_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_EBI_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_EBI_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_EBI_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_EBI_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
+#define			AT91_MATRIX_EBI_CS4A_SMC		(0 << 4)
+#define			AT91_MATRIX_EBI_CS4A_SMC_CF0		(1 << 4)
+#define		AT91_MATRIX_EBI_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
+#define			AT91_MATRIX_EBI_CS5A_SMC		(0 << 5)
+#define			AT91_MATRIX_EBI_CS5A_SMC_CF1		(1 << 5)
+#define		AT91_MATRIX_EBI_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define			AT91_MATRIX_EBI_DBPU_ON			(0 << 8)
+#define			AT91_MATRIX_EBI_DBPU_OFF		(1 << 8)
+#define		AT91_MATRIX_EBI_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_EBI_VDDIOMSEL_1_8V		(0 << 16)
+#define			AT91_MATRIX_EBI_VDDIOMSEL_3_3V		(1 << 16)
+#define		AT91_MATRIX_EBI_EBI_IOSR	(1 << 17)	/* EBI I/O slew rate selection */
+#define			AT91_MATRIX_EBI_EBI_IOSR_REDUCED	(0 << 17)
+#define			AT91_MATRIX_EBI_EBI_IOSR_NORMAL		(1 << 17)
+#define		AT91_MATRIX_EBI_DDR_IOSR	(1 << 18)	/* DDR2 dedicated port I/O slew rate selection */
+#define			AT91_MATRIX_EBI_DDR_IOSR_REDUCED	(0 << 18)
+#define			AT91_MATRIX_EBI_DDR_IOSR_NORMAL		(1 << 18)
+
+#define AT91_MATRIX_WPMR	(AT91_MATRIX + 0x1E4)	/* Write Protect Mode Register */
+#define		AT91_MATRIX_WPMR_WPEN		(1 << 0)	/* Write Protect ENable */
+#define			AT91_MATRIX_WPMR_WP_WPDIS		(0 << 0)
+#define			AT91_MATRIX_WPMR_WP_WPEN		(1 << 0)
+#define		AT91_MATRIX_WPMR_WPKEY		(0xFFFFFF << 8)	/* Write Protect KEY */
+
+#define AT91_MATRIX_WPSR	(AT91_MATRIX + 0x1E8)	/* Write Protect Status Register */
+#define		AT91_MATRIX_WPSR_WPVS		(1 << 0)	/* Write Protect Violation Status */
+#define			AT91_MATRIX_WPSR_NO_WPV		(0 << 0)
+#define			AT91_MATRIX_WPSR_WPV		(1 << 0)
+#define		AT91_MATRIX_WPSR_WPVSRC		(0xFFFF << 8)	/* Write Protect Violation Source */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index c554c3e4d55..b73e7bf097d 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -23,6 +23,7 @@
 #define ARCH_ID_AT91SAM9263	0x019607a0
 #define ARCH_ID_AT91SAM9G20	0x019905a0
 #define ARCH_ID_AT91SAM9RL64	0x019b03a0
+#define ARCH_ID_AT91SAM9G45	0x819b05a0
 #define ARCH_ID_AT91CAP9	0x039A03A0
 
 #define ARCH_ID_AT91SAM9XE128	0x329973a0
@@ -39,6 +40,15 @@ static inline unsigned long at91_cpu_identify(void)
 	return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION);
 }
 
+#define ARCH_EXID_AT91SAM9M11	0x00000001
+#define ARCH_EXID_AT91SAM9M10	0x00000002
+#define ARCH_EXID_AT91SAM9G45	0x00000004
+
+static inline unsigned long at91_exid_identify(void)
+{
+	return at91_sys_read(AT91_DBGU_EXID);
+}
+
 
 #define ARCH_FAMILY_AT91X92	0x09200000
 #define ARCH_FAMILY_AT91SAM9	0x01900000
@@ -99,6 +109,12 @@ static inline unsigned long at91cap9_rev_identify(void)
 #define cpu_is_at91sam9rl()	(0)
 #endif
 
+#ifdef CONFIG_ARCH_AT91SAM9G45
+#define cpu_is_at91sam9g45()	(at91_cpu_identify() == ARCH_ID_AT91SAM9G45)
+#else
+#define cpu_is_at91sam9g45()	(0)
+#endif
+
 #ifdef CONFIG_ARCH_AT91CAP9
 #define cpu_is_at91cap9()	(at91_cpu_identify() == ARCH_ID_AT91CAP9)
 #define cpu_is_at91cap9_revB()	(at91cap9_rev_identify() == ARCH_REVISION_CAP9_B)
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index da0b681c652..f0869170fa0 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -26,6 +26,8 @@
 #include <mach/at91sam9263.h>
 #elif defined(CONFIG_ARCH_AT91SAM9RL)
 #include <mach/at91sam9rl.h>
+#elif defined(CONFIG_ARCH_AT91SAM9G45)
+#include <mach/at91sam9g45.h>
 #elif defined(CONFIG_ARCH_AT91CAP9)
 #include <mach/at91cap9.h>
 #elif defined(CONFIG_ARCH_AT91X40)
diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h
index d84c9948bec..38f6c4250c7 100644
--- a/arch/arm/mach-at91/include/mach/timex.h
+++ b/arch/arm/mach-at91/include/mach/timex.h
@@ -62,6 +62,11 @@
 #define AT91SAM9_MASTER_CLOCK	132096000
 #define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
 
+#elif defined(CONFIG_ARCH_AT91SAM9G45)
+
+#define AT91SAM9_MASTER_CLOCK	133333333
+#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
+
 #elif defined(CONFIG_ARCH_AT91CAP9)
 
 #define AT91CAP9_MASTER_CLOCK	100000000
-- 
cgit v1.2.3


From 789b23bc40a67d9a19bedc2655c6bcab79bcabd8 Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 26 Jun 2009 15:36:58 +0100
Subject: [ARM] 5572/1: at91: Support for at91sam9g45 series: core chip & board
 support

Here are the at91 specific files dedicated to the at91sam9g45 series. They
mimic the traditional at91 way of managing chips & boards.

The first board that embeds at91sam9g45 chip is the AT91SAM9G45-EKES. In
the future, the main board for this 9g45 series will be the
AT91SAM9M10G45-EK (I choose this last name for the board file).

Simple drivers are enabled in _devices and board- files. Newer peripheral
support will be added in future patches.

Incuded peripherals support (for now):
- USART
- SPI
- Ethernet
- NAND flash
- LCD
- gpio/joystick/buttons
- leds and pwm

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/Kconfig               |   26 +-
 arch/arm/mach-at91/Makefile              |    4 +
 arch/arm/mach-at91/Makefile.boot         |    4 +
 arch/arm/mach-at91/at91sam9g45.c         |  360 +++++++++
 arch/arm/mach-at91/at91sam9g45_devices.c | 1230 ++++++++++++++++++++++++++++++
 arch/arm/mach-at91/board-sam9m10g45ek.c  |  389 ++++++++++
 arch/arm/mach-at91/generic.h             |    2 +
 arch/arm/mach-at91/include/mach/board.h  |    8 +-
 8 files changed, 2020 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/mach-at91/at91sam9g45.c
 create mode 100644 arch/arm/mach-at91/at91sam9g45_devices.c
 create mode 100644 arch/arm/mach-at91/board-sam9m10g45ek.c

(limited to 'arch/arm')

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 323b47f2b52..22309ba97fa 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -41,6 +41,12 @@ config ARCH_AT91SAM9G20
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 
+config ARCH_AT91SAM9G45
+	bool "AT91SAM9G45"
+	select CPU_ARM926T
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+
 config ARCH_AT91CAP9
 	bool "AT91CAP9"
 	select CPU_ARM926T
@@ -280,6 +286,22 @@ endif
 
 # ----------------------------------------------------------
 
+if ARCH_AT91SAM9G45
+
+comment "AT91SAM9G45 Board Type"
+
+config MACH_AT91SAM9G45EKES
+	bool "Atmel AT91SAM9G45-EKES Evaluation Kit"
+	depends on ARCH_AT91SAM9G45
+	help
+	  Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.
+	  "ES" at the end of the name means that this board is an
+	  Engineering Sample.
+
+endif
+
+# ----------------------------------------------------------
+
 if ARCH_AT91CAP9
 
 comment "AT91CAP9 Board Type"
@@ -321,7 +343,7 @@ config MTD_AT91_DATAFLASH_CARD
 
 config MTD_NAND_ATMEL_BUSWIDTH_16
 	bool "Enable 16-bit data bus interface to NAND flash"
-	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91CAP9ADK)
+	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
 	help
 	  On AT91SAM926x boards both types of NAND flash can be present
 	  (8 and 16 bit data bus width).
@@ -383,7 +405,7 @@ config AT91_EARLY_USART2
 
 config AT91_EARLY_USART3
 	bool "USART3"
-	depends on (ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
+	depends on (ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9260 || ARCH_AT91SAM9G20 || ARCH_AT91SAM9G45)
 
 config AT91_EARLY_USART4
 	bool "USART4"
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index c69ff237fd1..2975f9ab861 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261.o at91sam926x_time.o at91sam9261_d
 obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9G20)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o  sam9_smc.o
+ obj-$(CONFIG_ARCH_AT91SAM9G45)	+= at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91CAP9)	+= at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91X40)	+= at91x40.o at91x40_time.o
 
@@ -55,6 +56,9 @@ obj-$(CONFIG_MACH_AT91SAM9RLEK)	+= board-sam9rlek.o
 # AT91SAM9G20 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
 
+# AT91SAM9G45 board-specific support
+obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o
+
 # AT91CAP9 board-specific support
 obj-$(CONFIG_MACH_AT91CAP9ADK)	+= board-cap9adk.o
 
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index 071a2506a69..3462b815054 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -7,6 +7,10 @@ ifeq ($(CONFIG_ARCH_AT91CAP9),y)
    zreladdr-y	:= 0x70008000
 params_phys-y	:= 0x70000100
 initrd_phys-y	:= 0x70410000
+else ifeq ($(CONFIG_ARCH_AT91SAM9G45),y)
+   zreladdr-y	:= 0x70008000
+params_phys-y	:= 0x70000100
+initrd_phys-y	:= 0x70410000
 else
    zreladdr-y	:= 0x20008000
 params_phys-y	:= 0x20000100
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
new file mode 100644
index 00000000000..85166b7e69a
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -0,0 +1,360 @@
+/*
+ *  Chip-specific setup code for the AT91SAM9G45 family
+ *
+ *  Copyright (C) 2009 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/pm.h>
+
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/at91sam9g45.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
+
+#include "generic.h"
+#include "clock.h"
+
+static struct map_desc at91sam9g45_io_desc[] __initdata = {
+	{
+		.virtual	= AT91_VA_BASE_SYS,
+		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9G45_SRAM_SIZE,
+		.pfn		= __phys_to_pfn(AT91SAM9G45_SRAM_BASE),
+		.length		= AT91SAM9G45_SRAM_SIZE,
+		.type		= MT_DEVICE,
+	}
+};
+
+/* --------------------------------------------------------------------
+ *  Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioA_clk = {
+	.name		= "pioA_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_PIOA,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioB_clk = {
+	.name		= "pioB_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_PIOB,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioC_clk = {
+	.name		= "pioC_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_PIOC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioDE_clk = {
+	.name		= "pioDE_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_PIODE,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+	.name		= "usart0_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_US0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+	.name		= "usart1_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_US1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+	.name		= "usart2_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_US2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart3_clk = {
+	.name		= "usart3_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_US3,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc0_clk = {
+	.name		= "mci0_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_MCI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi0_clk = {
+	.name		= "twi0_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_TWI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi1_clk = {
+	.name		= "twi1_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_TWI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+	.name		= "spi0_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_SPI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+	.name		= "spi1_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_SPI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc0_clk = {
+	.name		= "ssc0_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_SSC0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc1_clk = {
+	.name		= "ssc1_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_SSC1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tcb_clk = {
+	.name		= "tcb_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_TCB,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pwm_clk = {
+	.name		= "pwm_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_PWMC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tsc_clk = {
+	.name		= "tsc_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_TSC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk dma_clk = {
+	.name		= "dma_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_DMA,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk uhphs_clk = {
+	.name		= "uhphs_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_UHPHS,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk lcdc_clk = {
+	.name		= "lcdc_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_LCDC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ac97_clk = {
+	.name		= "ac97_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_AC97C,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk macb_clk = {
+	.name		= "macb_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_EMAC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk isi_clk = {
+	.name		= "isi_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_ISI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk udphs_clk = {
+	.name		= "udphs_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_UDPHS,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc1_clk = {
+	.name		= "mci1_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_MCI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+
+/* One additional fake clock for ohci */
+static struct clk ohci_clk = {
+	.name		= "ohci_clk",
+	.pmc_mask	= 0,
+	.type		= CLK_TYPE_PERIPHERAL,
+	.parent		= &uhphs_clk,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+	&pioA_clk,
+	&pioB_clk,
+	&pioC_clk,
+	&pioDE_clk,
+	&usart0_clk,
+	&usart1_clk,
+	&usart2_clk,
+	&usart3_clk,
+	&mmc0_clk,
+	&twi0_clk,
+	&twi1_clk,
+	&spi0_clk,
+	&spi1_clk,
+	&ssc0_clk,
+	&ssc1_clk,
+	&tcb_clk,
+	&pwm_clk,
+	&tsc_clk,
+	&dma_clk,
+	&uhphs_clk,
+	&lcdc_clk,
+	&ac97_clk,
+	&macb_clk,
+	&isi_clk,
+	&udphs_clk,
+	&mmc1_clk,
+	// irq0
+	&ohci_clk,
+};
+
+/*
+ * The two programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+	.name		= "pck0",
+	.pmc_mask	= AT91_PMC_PCK0,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 0,
+};
+static struct clk pck1 = {
+	.name		= "pck1",
+	.pmc_mask	= AT91_PMC_PCK1,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 1,
+};
+
+static void __init at91sam9g45_register_clocks(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+		clk_register(periph_clocks[i]);
+
+	clk_register(&pck0);
+	clk_register(&pck1);
+}
+
+/* --------------------------------------------------------------------
+ *  GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at91sam9g45_gpio[] = {
+	{
+		.id		= AT91SAM9G45_ID_PIOA,
+		.offset		= AT91_PIOA,
+		.clock		= &pioA_clk,
+	}, {
+		.id		= AT91SAM9G45_ID_PIOB,
+		.offset		= AT91_PIOB,
+		.clock		= &pioB_clk,
+	}, {
+		.id		= AT91SAM9G45_ID_PIOC,
+		.offset		= AT91_PIOC,
+		.clock		= &pioC_clk,
+	}, {
+		.id		= AT91SAM9G45_ID_PIODE,
+		.offset		= AT91_PIOD,
+		.clock		= &pioDE_clk,
+	}, {
+		.id		= AT91SAM9G45_ID_PIODE,
+		.offset		= AT91_PIOE,
+		.clock		= &pioDE_clk,
+	}
+};
+
+static void at91sam9g45_reset(void)
+{
+	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+}
+
+static void at91sam9g45_poweroff(void)
+{
+	at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
+}
+
+
+/* --------------------------------------------------------------------
+ *  AT91SAM9G45 processor initialization
+ * -------------------------------------------------------------------- */
+
+void __init at91sam9g45_initialize(unsigned long main_clock)
+{
+	/* Map peripherals */
+	iotable_init(at91sam9g45_io_desc, ARRAY_SIZE(at91sam9g45_io_desc));
+
+	at91_arch_reset = at91sam9g45_reset;
+	pm_power_off = at91sam9g45_poweroff;
+	at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0);
+
+	/* Init clock subsystem */
+	at91_clock_init(main_clock);
+
+	/* Register the processor-specific clocks */
+	at91sam9g45_register_clocks();
+
+	/* Register GPIO subsystem */
+	at91_gpio_init(at91sam9g45_gpio, 5);
+}
+
+/* --------------------------------------------------------------------
+ *  Interrupt initialization
+ * -------------------------------------------------------------------- */
+
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = {
+	7,	/* Advanced Interrupt Controller (FIQ) */
+	7,	/* System Peripherals */
+	1,	/* Parallel IO Controller A */
+	1,	/* Parallel IO Controller B */
+	1,	/* Parallel IO Controller C */
+	1,	/* Parallel IO Controller D and E */
+	0,
+	5,	/* USART 0 */
+	5,	/* USART 1 */
+	5,	/* USART 2 */
+	5,	/* USART 3 */
+	0,	/* Multimedia Card Interface 0 */
+	6,	/* Two-Wire Interface 0 */
+	6,	/* Two-Wire Interface 1 */
+	5,	/* Serial Peripheral Interface 0 */
+	5,	/* Serial Peripheral Interface 1 */
+	4,	/* Serial Synchronous Controller 0 */
+	4,	/* Serial Synchronous Controller 1 */
+	0,	/* Timer Counter 0, 1, 2, 3, 4 and 5 */
+	0,	/* Pulse Width Modulation Controller */
+	0,	/* Touch Screen Controller */
+	0,	/* DMA Controller */
+	2,	/* USB Host High Speed port */
+	3,	/* LDC Controller */
+	5,	/* AC97 Controller */
+	3,	/* Ethernet */
+	0,	/* Image Sensor Interface */
+	2,	/* USB Device High speed port */
+	0,
+	0,	/* Multimedia Card Interface 1 */
+	0,
+	0,	/* Advanced Interrupt Controller (IRQ0) */
+};
+
+void __init at91sam9g45_init_interrupts(unsigned int priority[NR_AIC_IRQS])
+{
+	if (!priority)
+		priority = at91sam9g45_default_irq_priority;
+
+	/* Initialize the AIC interrupt controller */
+	at91_aic_init(priority);
+
+	/* Enable GPIO interrupts */
+	at91_gpio_irq_setup();
+}
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
new file mode 100644
index 00000000000..d746e8621bc
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -0,0 +1,1230 @@
+/*
+ *  On-Chip devices setup code for the AT91SAM9G45 family
+ *
+ *  Copyright (C) 2009 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/i2c-gpio.h>
+
+#include <linux/fb.h>
+#include <video/atmel_lcdc.h>
+
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9g45.h>
+#include <mach/at91sam9g45_matrix.h>
+#include <mach/at91sam9_smc.h>
+
+#include "generic.h"
+
+
+/* --------------------------------------------------------------------
+ *  USB Host (OHCI)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static u64 ohci_dmamask = DMA_BIT_MASK(32);
+static struct at91_usbh_data usbh_ohci_data;
+
+static struct resource usbh_ohci_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_OHCI_BASE,
+		.end	= AT91SAM9G45_OHCI_BASE + SZ_1M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_UHPHS,
+		.end	= AT91SAM9G45_ID_UHPHS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91_usbh_ohci_device = {
+	.name		= "at91_ohci",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &ohci_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &usbh_ohci_data,
+	},
+	.resource	= usbh_ohci_resources,
+	.num_resources	= ARRAY_SIZE(usbh_ohci_resources),
+};
+
+void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data)
+{
+	int i;
+
+	if (!data)
+		return;
+
+	/* Enable VBus control for UHP ports */
+	for (i = 0; i < data->ports; i++) {
+		if (data->vbus_pin[i])
+			at91_set_gpio_output(data->vbus_pin[i], 0);
+	}
+
+	usbh_ohci_data = *data;
+	platform_device_register(&at91_usbh_ohci_device);
+}
+#else
+void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  USB HS Device (Gadget)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+static struct resource usba_udc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_UDPHS_FIFO,
+		.end	= AT91SAM9G45_UDPHS_FIFO + SZ_512K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_BASE_UDPHS,
+		.end	= AT91SAM9G45_BASE_UDPHS + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= AT91SAM9G45_ID_UDPHS,
+		.end	= AT91SAM9G45_ID_UDPHS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+#define EP(nam, idx, maxpkt, maxbk, dma, isoc)			\
+	[idx] = {						\
+		.name		= nam,				\
+		.index		= idx,				\
+		.fifo_size	= maxpkt,			\
+		.nr_banks	= maxbk,			\
+		.can_dma	= dma,				\
+		.can_isoc	= isoc,				\
+	}
+
+static struct usba_ep_data usba_udc_ep[] __initdata = {
+	EP("ep0", 0, 64, 1, 0, 0),
+	EP("ep1", 1, 1024, 2, 1, 1),
+	EP("ep2", 2, 1024, 2, 1, 1),
+	EP("ep3", 3, 1024, 3, 1, 0),
+	EP("ep4", 4, 1024, 3, 1, 0),
+	EP("ep5", 5, 1024, 3, 1, 1),
+	EP("ep6", 6, 1024, 3, 1, 1),
+};
+
+#undef EP
+
+/*
+ * pdata doesn't have room for any endpoints, so we need to
+ * append room for the ones we need right after it.
+ */
+static struct {
+	struct usba_platform_data pdata;
+	struct usba_ep_data ep[7];
+} usba_udc_data;
+
+static struct platform_device at91_usba_udc_device = {
+	.name		= "atmel_usba_udc",
+	.id		= -1,
+	.dev		= {
+				.platform_data	= &usba_udc_data.pdata,
+	},
+	.resource	= usba_udc_resources,
+	.num_resources	= ARRAY_SIZE(usba_udc_resources),
+};
+
+void __init at91_add_device_usba(struct usba_platform_data *data)
+{
+	usba_udc_data.pdata.vbus_pin = -EINVAL;
+	usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
+	memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));;
+
+	if (data && data->vbus_pin > 0) {
+		at91_set_gpio_input(data->vbus_pin, 0);
+		at91_set_deglitch(data->vbus_pin, 1);
+		usba_udc_data.pdata.vbus_pin = data->vbus_pin;
+	}
+
+	/* Pullup pin is handled internally by USB device peripheral */
+
+	/* Clocks */
+	at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
+	at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
+
+	platform_device_register(&at91_usba_udc_device);
+}
+#else
+void __init at91_add_device_usba(struct usba_platform_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  Ethernet
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
+static u64 eth_dmamask = DMA_BIT_MASK(32);
+static struct at91_eth_data eth_data;
+
+static struct resource eth_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_EMAC,
+		.end	= AT91SAM9G45_BASE_EMAC + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_EMAC,
+		.end	= AT91SAM9G45_ID_EMAC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_eth_device = {
+	.name		= "macb",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &eth_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &eth_data,
+	},
+	.resource	= eth_resources,
+	.num_resources	= ARRAY_SIZE(eth_resources),
+};
+
+void __init at91_add_device_eth(struct at91_eth_data *data)
+{
+	if (!data)
+		return;
+
+	if (data->phy_irq_pin) {
+		at91_set_gpio_input(data->phy_irq_pin, 0);
+		at91_set_deglitch(data->phy_irq_pin, 1);
+	}
+
+	/* Pins used for MII and RMII */
+	at91_set_A_periph(AT91_PIN_PA17, 0);	/* ETXCK_EREFCK */
+	at91_set_A_periph(AT91_PIN_PA15, 0);	/* ERXDV */
+	at91_set_A_periph(AT91_PIN_PA12, 0);	/* ERX0 */
+	at91_set_A_periph(AT91_PIN_PA13, 0);	/* ERX1 */
+	at91_set_A_periph(AT91_PIN_PA16, 0);	/* ERXER */
+	at91_set_A_periph(AT91_PIN_PA14, 0);	/* ETXEN */
+	at91_set_A_periph(AT91_PIN_PA10, 0);	/* ETX0 */
+	at91_set_A_periph(AT91_PIN_PA11, 0);	/* ETX1 */
+	at91_set_A_periph(AT91_PIN_PA19, 0);	/* EMDIO */
+	at91_set_A_periph(AT91_PIN_PA18, 0);	/* EMDC */
+
+	if (!data->is_rmii) {
+		at91_set_B_periph(AT91_PIN_PA29, 0);	/* ECRS */
+		at91_set_B_periph(AT91_PIN_PA30, 0);	/* ECOL */
+		at91_set_B_periph(AT91_PIN_PA8,  0);	/* ERX2 */
+		at91_set_B_periph(AT91_PIN_PA9,  0);	/* ERX3 */
+		at91_set_B_periph(AT91_PIN_PA28, 0);	/* ERXCK */
+		at91_set_B_periph(AT91_PIN_PA6,  0);	/* ETX2 */
+		at91_set_B_periph(AT91_PIN_PA7,  0);	/* ETX3 */
+		at91_set_B_periph(AT91_PIN_PA27, 0);	/* ETXER */
+	}
+
+	eth_data = *data;
+	platform_device_register(&at91sam9g45_eth_device);
+}
+#else
+void __init at91_add_device_eth(struct at91_eth_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  NAND / SmartMedia
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
+static struct atmel_nand_data nand_data;
+
+#define NAND_BASE	AT91_CHIPSELECT_3
+
+static struct resource nand_resources[] = {
+	[0] = {
+		.start	= NAND_BASE,
+		.end	= NAND_BASE + SZ_256M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91_BASE_SYS + AT91_ECC,
+		.end	= AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device at91sam9g45_nand_device = {
+	.name		= "atmel_nand",
+	.id		= -1,
+	.dev		= {
+				.platform_data	= &nand_data,
+	},
+	.resource	= nand_resources,
+	.num_resources	= ARRAY_SIZE(nand_resources),
+};
+
+void __init at91_add_device_nand(struct atmel_nand_data *data)
+{
+	unsigned long csa;
+
+	if (!data)
+		return;
+
+	csa = at91_sys_read(AT91_MATRIX_EBICSA);
+	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
+
+	/* enable pin */
+	if (data->enable_pin)
+		at91_set_gpio_output(data->enable_pin, 1);
+
+	/* ready/busy pin */
+	if (data->rdy_pin)
+		at91_set_gpio_input(data->rdy_pin, 1);
+
+	/* card detect pin */
+	if (data->det_pin)
+		at91_set_gpio_input(data->det_pin, 1);
+
+	nand_data = *data;
+	platform_device_register(&at91sam9g45_nand_device);
+}
+#else
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  TWI (i2c)
+ * -------------------------------------------------------------------- */
+
+/*
+ * Prefer the GPIO code since the TWI controller isn't robust
+ * (gets overruns and underruns under load) and can only issue
+ * repeated STARTs in one scenario (the driver doesn't yet handle them).
+ */
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+static struct i2c_gpio_platform_data pdata_i2c0 = {
+	.sda_pin		= AT91_PIN_PA20,
+	.sda_is_open_drain	= 1,
+	.scl_pin		= AT91_PIN_PA21,
+	.scl_is_open_drain	= 1,
+	.udelay			= 2,		/* ~100 kHz */
+};
+
+static struct platform_device at91sam9g45_twi0_device = {
+	.name			= "i2c-gpio",
+	.id			= 0,
+	.dev.platform_data	= &pdata_i2c0,
+};
+
+static struct i2c_gpio_platform_data pdata_i2c1 = {
+	.sda_pin		= AT91_PIN_PB10,
+	.sda_is_open_drain	= 1,
+	.scl_pin		= AT91_PIN_PB11,
+	.scl_is_open_drain	= 1,
+	.udelay			= 2,		/* ~100 kHz */
+};
+
+static struct platform_device at91sam9g45_twi1_device = {
+	.name			= "i2c-gpio",
+	.id			= 1,
+	.dev.platform_data	= &pdata_i2c1,
+};
+
+void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
+{
+	i2c_register_board_info(i2c_id, devices, nr_devices);
+
+	if (i2c_id == 0) {
+		at91_set_GPIO_periph(AT91_PIN_PA20, 1);		/* TWD (SDA) */
+		at91_set_multi_drive(AT91_PIN_PA20, 1);
+
+		at91_set_GPIO_periph(AT91_PIN_PA21, 1);		/* TWCK (SCL) */
+		at91_set_multi_drive(AT91_PIN_PA21, 1);
+
+		platform_device_register(&at91sam9g45_twi0_device);
+	} else {
+		at91_set_GPIO_periph(AT91_PIN_PB10, 1);		/* TWD (SDA) */
+		at91_set_multi_drive(AT91_PIN_PB10, 1);
+
+		at91_set_GPIO_periph(AT91_PIN_PB11, 1);		/* TWCK (SCL) */
+		at91_set_multi_drive(AT91_PIN_PB11, 1);
+
+		platform_device_register(&at91sam9g45_twi1_device);
+	}
+}
+
+#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+static struct resource twi0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_TWI0,
+		.end	= AT91SAM9G45_BASE_TWI0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_TWI0,
+		.end	= AT91SAM9G45_ID_TWI0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_twi0_device = {
+	.name		= "at91_i2c",
+	.id		= 0,
+	.resource	= twi0_resources,
+	.num_resources	= ARRAY_SIZE(twi0_resources),
+};
+
+static struct resource twi1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_TWI1,
+		.end	= AT91SAM9G45_BASE_TWI1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_TWI1,
+		.end	= AT91SAM9G45_ID_TWI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_twi1_device = {
+	.name		= "at91_i2c",
+	.id		= 1,
+	.resource	= twi1_resources,
+	.num_resources	= ARRAY_SIZE(twi1_resources),
+};
+
+void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
+{
+	i2c_register_board_info(i2c_id, devices, nr_devices);
+
+	/* pins used for TWI interface */
+	if (i2c_id == 0) {
+		at91_set_A_periph(AT91_PIN_PA20, 0);		/* TWD */
+		at91_set_multi_drive(AT91_PIN_PA20, 1);
+
+		at91_set_A_periph(AT91_PIN_PA21, 0);		/* TWCK */
+		at91_set_multi_drive(AT91_PIN_PA21, 1);
+
+		platform_device_register(&at91sam9g45_twi0_device);
+	} else {
+		at91_set_A_periph(AT91_PIN_PB10, 0);		/* TWD */
+		at91_set_multi_drive(AT91_PIN_PB10, 1);
+
+		at91_set_A_periph(AT91_PIN_PB11, 0);		/* TWCK */
+		at91_set_multi_drive(AT91_PIN_PB11, 1);
+
+		platform_device_register(&at91sam9g45_twi1_device);
+	}
+}
+#else
+void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+static struct resource spi0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_SPI0,
+		.end	= AT91SAM9G45_BASE_SPI0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_SPI0,
+		.end	= AT91SAM9G45_ID_SPI0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_spi0_device = {
+	.name		= "atmel_spi",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &spi_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= spi0_resources,
+	.num_resources	= ARRAY_SIZE(spi0_resources),
+};
+
+static const unsigned spi0_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PB18, AT91_PIN_PB19, AT91_PIN_PD27 };
+
+static struct resource spi1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_SPI1,
+		.end	= AT91SAM9G45_BASE_SPI1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_SPI1,
+		.end	= AT91SAM9G45_ID_SPI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_spi1_device = {
+	.name		= "atmel_spi",
+	.id		= 1,
+	.dev		= {
+				.dma_mask		= &spi_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= spi1_resources,
+	.num_resources	= ARRAY_SIZE(spi1_resources),
+};
+
+static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB17, AT91_PIN_PD28, AT91_PIN_PD18, AT91_PIN_PD19 };
+
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+{
+	int i;
+	unsigned long cs_pin;
+	short enable_spi0 = 0;
+	short enable_spi1 = 0;
+
+	/* Choose SPI chip-selects */
+	for (i = 0; i < nr_devices; i++) {
+		if (devices[i].controller_data)
+			cs_pin = (unsigned long) devices[i].controller_data;
+		else if (devices[i].bus_num == 0)
+			cs_pin = spi0_standard_cs[devices[i].chip_select];
+		else
+			cs_pin = spi1_standard_cs[devices[i].chip_select];
+
+		if (devices[i].bus_num == 0)
+			enable_spi0 = 1;
+		else
+			enable_spi1 = 1;
+
+		/* enable chip-select pin */
+		at91_set_gpio_output(cs_pin, 1);
+
+		/* pass chip-select pin to driver */
+		devices[i].controller_data = (void *) cs_pin;
+	}
+
+	spi_register_board_info(devices, nr_devices);
+
+	/* Configure SPI bus(es) */
+	if (enable_spi0) {
+		at91_set_A_periph(AT91_PIN_PB0, 0);	/* SPI0_MISO */
+		at91_set_A_periph(AT91_PIN_PB1, 0);	/* SPI0_MOSI */
+		at91_set_A_periph(AT91_PIN_PB2, 0);	/* SPI0_SPCK */
+
+		at91_clock_associate("spi0_clk", &at91sam9g45_spi0_device.dev, "spi_clk");
+		platform_device_register(&at91sam9g45_spi0_device);
+	}
+	if (enable_spi1) {
+		at91_set_A_periph(AT91_PIN_PB14, 0);	/* SPI1_MISO */
+		at91_set_A_periph(AT91_PIN_PB15, 0);	/* SPI1_MOSI */
+		at91_set_A_periph(AT91_PIN_PB16, 0);	/* SPI1_SPCK */
+
+		at91_clock_associate("spi1_clk", &at91sam9g45_spi1_device.dev, "spi_clk");
+		platform_device_register(&at91sam9g45_spi1_device);
+	}
+}
+#else
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  LCD Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+static u64 lcdc_dmamask = DMA_BIT_MASK(32);
+static struct atmel_lcdfb_info lcdc_data;
+
+static struct resource lcdc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_LCDC_BASE,
+		.end	= AT91SAM9G45_LCDC_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_LCDC,
+		.end	= AT91SAM9G45_ID_LCDC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91_lcdc_device = {
+	.name		= "atmel_lcdfb",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &lcdc_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &lcdc_data,
+	},
+	.resource	= lcdc_resources,
+	.num_resources	= ARRAY_SIZE(lcdc_resources),
+};
+
+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
+{
+	if (!data)
+		return;
+
+	at91_set_A_periph(AT91_PIN_PE0, 0);	/* LCDDPWR */
+
+	at91_set_A_periph(AT91_PIN_PE2, 0);	/* LCDCC */
+	at91_set_A_periph(AT91_PIN_PE3, 0);	/* LCDVSYNC */
+	at91_set_A_periph(AT91_PIN_PE4, 0);	/* LCDHSYNC */
+	at91_set_A_periph(AT91_PIN_PE5, 0);	/* LCDDOTCK */
+	at91_set_A_periph(AT91_PIN_PE6, 0);	/* LCDDEN */
+	at91_set_A_periph(AT91_PIN_PE7, 0);	/* LCDD0 */
+	at91_set_A_periph(AT91_PIN_PE8, 0);	/* LCDD1 */
+	at91_set_A_periph(AT91_PIN_PE9, 0);	/* LCDD2 */
+	at91_set_A_periph(AT91_PIN_PE10, 0);	/* LCDD3 */
+	at91_set_A_periph(AT91_PIN_PE11, 0);	/* LCDD4 */
+	at91_set_A_periph(AT91_PIN_PE12, 0);	/* LCDD5 */
+	at91_set_A_periph(AT91_PIN_PE13, 0);	/* LCDD6 */
+	at91_set_A_periph(AT91_PIN_PE14, 0);	/* LCDD7 */
+	at91_set_A_periph(AT91_PIN_PE15, 0);	/* LCDD8 */
+	at91_set_A_periph(AT91_PIN_PE16, 0);	/* LCDD9 */
+	at91_set_A_periph(AT91_PIN_PE17, 0);	/* LCDD10 */
+	at91_set_A_periph(AT91_PIN_PE18, 0);	/* LCDD11 */
+	at91_set_A_periph(AT91_PIN_PE19, 0);	/* LCDD12 */
+	at91_set_A_periph(AT91_PIN_PE20, 0);	/* LCDD13 */
+	at91_set_A_periph(AT91_PIN_PE21, 0);	/* LCDD14 */
+	at91_set_A_periph(AT91_PIN_PE22, 0);	/* LCDD15 */
+	at91_set_A_periph(AT91_PIN_PE23, 0);	/* LCDD16 */
+	at91_set_A_periph(AT91_PIN_PE24, 0);	/* LCDD17 */
+	at91_set_A_periph(AT91_PIN_PE25, 0);	/* LCDD18 */
+	at91_set_A_periph(AT91_PIN_PE26, 0);	/* LCDD19 */
+	at91_set_A_periph(AT91_PIN_PE27, 0);	/* LCDD20 */
+	at91_set_A_periph(AT91_PIN_PE28, 0);	/* LCDD21 */
+	at91_set_A_periph(AT91_PIN_PE29, 0);	/* LCDD22 */
+	at91_set_A_periph(AT91_PIN_PE30, 0);	/* LCDD23 */
+
+	lcdc_data = *data;
+	platform_device_register(&at91_lcdc_device);
+}
+#else
+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  Timer/Counter block
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_ATMEL_TCLIB
+static struct resource tcb0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_TCB0,
+		.end	= AT91SAM9G45_BASE_TCB0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_TCB,
+		.end	= AT91SAM9G45_ID_TCB,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_tcb0_device = {
+	.name		= "atmel_tcb",
+	.id		= 0,
+	.resource	= tcb0_resources,
+	.num_resources	= ARRAY_SIZE(tcb0_resources),
+};
+
+/* TCB1 begins with TC3 */
+static struct resource tcb1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_TCB1,
+		.end	= AT91SAM9G45_BASE_TCB1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_TCB,
+		.end	= AT91SAM9G45_ID_TCB,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_tcb1_device = {
+	.name		= "atmel_tcb",
+	.id		= 1,
+	.resource	= tcb1_resources,
+	.num_resources	= ARRAY_SIZE(tcb1_resources),
+};
+
+static void __init at91_add_device_tc(void)
+{
+	/* this chip has one clock and irq for all six TC channels */
+	at91_clock_associate("tcb_clk", &at91sam9g45_tcb0_device.dev, "t0_clk");
+	platform_device_register(&at91sam9g45_tcb0_device);
+	at91_clock_associate("tcb_clk", &at91sam9g45_tcb1_device.dev, "t0_clk");
+	platform_device_register(&at91sam9g45_tcb1_device);
+}
+#else
+static void __init at91_add_device_tc(void) { }
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  RTC
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
+static struct platform_device at91sam9g45_rtc_device = {
+	.name		= "at91_rtc",
+	.id		= -1,
+	.num_resources	= 0,
+};
+
+static void __init at91_add_device_rtc(void)
+{
+	platform_device_register(&at91sam9g45_rtc_device);
+}
+#else
+static void __init at91_add_device_rtc(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  RTT
+ * -------------------------------------------------------------------- */
+
+static struct resource rtt_resources[] = {
+	{
+		.start	= AT91_BASE_SYS + AT91_RTT,
+		.end	= AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device at91sam9g45_rtt_device = {
+	.name		= "at91_rtt",
+	.id		= 0,
+	.resource	= rtt_resources,
+	.num_resources	= ARRAY_SIZE(rtt_resources),
+};
+
+static void __init at91_add_device_rtt(void)
+{
+	platform_device_register(&at91sam9g45_rtt_device);
+}
+
+
+/* --------------------------------------------------------------------
+ *  Watchdog
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+static struct platform_device at91sam9g45_wdt_device = {
+	.name		= "at91_wdt",
+	.id		= -1,
+	.num_resources	= 0,
+};
+
+static void __init at91_add_device_watchdog(void)
+{
+	platform_device_register(&at91sam9g45_wdt_device);
+}
+#else
+static void __init at91_add_device_watchdog(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  PWM
+ * --------------------------------------------------------------------*/
+
+#if defined(CONFIG_ATMEL_PWM) || defined(CONFIG_ATMEL_PWM_MODULE)
+static u32 pwm_mask;
+
+static struct resource pwm_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_PWMC,
+		.end	= AT91SAM9G45_BASE_PWMC + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_PWMC,
+		.end	= AT91SAM9G45_ID_PWMC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_pwm0_device = {
+	.name	= "atmel_pwm",
+	.id	= -1,
+	.dev	= {
+		.platform_data		= &pwm_mask,
+	},
+	.resource	= pwm_resources,
+	.num_resources	= ARRAY_SIZE(pwm_resources),
+};
+
+void __init at91_add_device_pwm(u32 mask)
+{
+	if (mask & (1 << AT91_PWM0))
+		at91_set_B_periph(AT91_PIN_PD24, 1);	/* enable PWM0 */
+
+	if (mask & (1 << AT91_PWM1))
+		at91_set_B_periph(AT91_PIN_PD31, 1);	/* enable PWM1 */
+
+	if (mask & (1 << AT91_PWM2))
+		at91_set_B_periph(AT91_PIN_PD26, 1);	/* enable PWM2 */
+
+	if (mask & (1 << AT91_PWM3))
+		at91_set_B_periph(AT91_PIN_PD0, 1);	/* enable PWM3 */
+
+	pwm_mask = mask;
+
+	platform_device_register(&at91sam9g45_pwm0_device);
+}
+#else
+void __init at91_add_device_pwm(u32 mask) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  SSC -- Synchronous Serial Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
+static u64 ssc0_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_SSC0,
+		.end	= AT91SAM9G45_BASE_SSC0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_SSC0,
+		.end	= AT91SAM9G45_ID_SSC0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_ssc0_device = {
+	.name	= "ssc",
+	.id	= 0,
+	.dev	= {
+		.dma_mask		= &ssc0_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= ssc0_resources,
+	.num_resources	= ARRAY_SIZE(ssc0_resources),
+};
+
+static inline void configure_ssc0_pins(unsigned pins)
+{
+	if (pins & ATMEL_SSC_TF)
+		at91_set_A_periph(AT91_PIN_PD1, 1);
+	if (pins & ATMEL_SSC_TK)
+		at91_set_A_periph(AT91_PIN_PD0, 1);
+	if (pins & ATMEL_SSC_TD)
+		at91_set_A_periph(AT91_PIN_PD2, 1);
+	if (pins & ATMEL_SSC_RD)
+		at91_set_A_periph(AT91_PIN_PD3, 1);
+	if (pins & ATMEL_SSC_RK)
+		at91_set_A_periph(AT91_PIN_PD4, 1);
+	if (pins & ATMEL_SSC_RF)
+		at91_set_A_periph(AT91_PIN_PD5, 1);
+}
+
+static u64 ssc1_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_SSC1,
+		.end	= AT91SAM9G45_BASE_SSC1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_SSC1,
+		.end	= AT91SAM9G45_ID_SSC1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_ssc1_device = {
+	.name	= "ssc",
+	.id	= 1,
+	.dev	= {
+		.dma_mask		= &ssc1_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= ssc1_resources,
+	.num_resources	= ARRAY_SIZE(ssc1_resources),
+};
+
+static inline void configure_ssc1_pins(unsigned pins)
+{
+	if (pins & ATMEL_SSC_TF)
+		at91_set_A_periph(AT91_PIN_PD14, 1);
+	if (pins & ATMEL_SSC_TK)
+		at91_set_A_periph(AT91_PIN_PD12, 1);
+	if (pins & ATMEL_SSC_TD)
+		at91_set_A_periph(AT91_PIN_PD10, 1);
+	if (pins & ATMEL_SSC_RD)
+		at91_set_A_periph(AT91_PIN_PD11, 1);
+	if (pins & ATMEL_SSC_RK)
+		at91_set_A_periph(AT91_PIN_PD13, 1);
+	if (pins & ATMEL_SSC_RF)
+		at91_set_A_periph(AT91_PIN_PD15, 1);
+}
+
+/*
+ * SSC controllers are accessed through library code, instead of any
+ * kind of all-singing/all-dancing driver.  For example one could be
+ * used by a particular I2S audio codec's driver, while another one
+ * on the same system might be used by a custom data capture driver.
+ */
+void __init at91_add_device_ssc(unsigned id, unsigned pins)
+{
+	struct platform_device *pdev;
+
+	/*
+	 * NOTE: caller is responsible for passing information matching
+	 * "pins" to whatever will be using each particular controller.
+	 */
+	switch (id) {
+	case AT91SAM9G45_ID_SSC0:
+		pdev = &at91sam9g45_ssc0_device;
+		configure_ssc0_pins(pins);
+		at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
+		break;
+	case AT91SAM9G45_ID_SSC1:
+		pdev = &at91sam9g45_ssc1_device;
+		configure_ssc1_pins(pins);
+		at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
+		break;
+	default:
+		return;
+	}
+
+	platform_device_register(pdev);
+}
+
+#else
+void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  UART
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SERIAL_ATMEL)
+static struct resource dbgu_resources[] = {
+	[0] = {
+		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
+		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91_ID_SYS,
+		.end	= AT91_ID_SYS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data dbgu_data = {
+	.use_dma_tx	= 0,
+	.use_dma_rx	= 0,
+	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+};
+
+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91sam9g45_dbgu_device = {
+	.name		= "atmel_usart",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &dbgu_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &dbgu_data,
+	},
+	.resource	= dbgu_resources,
+	.num_resources	= ARRAY_SIZE(dbgu_resources),
+};
+
+static inline void configure_dbgu_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PB12, 0);		/* DRXD */
+	at91_set_A_periph(AT91_PIN_PB13, 1);		/* DTXD */
+}
+
+static struct resource uart0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_US0,
+		.end	= AT91SAM9G45_BASE_US0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_US0,
+		.end	= AT91SAM9G45_ID_US0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart0_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static u64 uart0_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91sam9g45_uart0_device = {
+	.name		= "atmel_usart",
+	.id		= 1,
+	.dev		= {
+				.dma_mask		= &uart0_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &uart0_data,
+	},
+	.resource	= uart0_resources,
+	.num_resources	= ARRAY_SIZE(uart0_resources),
+};
+
+static inline void configure_usart0_pins(unsigned pins)
+{
+	at91_set_A_periph(AT91_PIN_PB19, 1);		/* TXD0 */
+	at91_set_A_periph(AT91_PIN_PB18, 0);		/* RXD0 */
+
+	if (pins & ATMEL_UART_RTS)
+		at91_set_B_periph(AT91_PIN_PB17, 0);	/* RTS0 */
+	if (pins & ATMEL_UART_CTS)
+		at91_set_B_periph(AT91_PIN_PB15, 0);	/* CTS0 */
+}
+
+static struct resource uart1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_US1,
+		.end	= AT91SAM9G45_BASE_US1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_US1,
+		.end	= AT91SAM9G45_ID_US1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart1_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static u64 uart1_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91sam9g45_uart1_device = {
+	.name		= "atmel_usart",
+	.id		= 2,
+	.dev		= {
+				.dma_mask		= &uart1_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &uart1_data,
+	},
+	.resource	= uart1_resources,
+	.num_resources	= ARRAY_SIZE(uart1_resources),
+};
+
+static inline void configure_usart1_pins(unsigned pins)
+{
+	at91_set_A_periph(AT91_PIN_PB4, 1);		/* TXD1 */
+	at91_set_A_periph(AT91_PIN_PB5, 0);		/* RXD1 */
+
+	if (pins & ATMEL_UART_RTS)
+		at91_set_A_periph(AT91_PIN_PD16, 0);	/* RTS1 */
+	if (pins & ATMEL_UART_CTS)
+		at91_set_A_periph(AT91_PIN_PD17, 0);	/* CTS1 */
+}
+
+static struct resource uart2_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_US2,
+		.end	= AT91SAM9G45_BASE_US2 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_US2,
+		.end	= AT91SAM9G45_ID_US2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart2_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static u64 uart2_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91sam9g45_uart2_device = {
+	.name		= "atmel_usart",
+	.id		= 3,
+	.dev		= {
+				.dma_mask		= &uart2_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &uart2_data,
+	},
+	.resource	= uart2_resources,
+	.num_resources	= ARRAY_SIZE(uart2_resources),
+};
+
+static inline void configure_usart2_pins(unsigned pins)
+{
+	at91_set_A_periph(AT91_PIN_PB6, 1);		/* TXD2 */
+	at91_set_A_periph(AT91_PIN_PB7, 0);		/* RXD2 */
+
+	if (pins & ATMEL_UART_RTS)
+		at91_set_B_periph(AT91_PIN_PC9, 0);	/* RTS2 */
+	if (pins & ATMEL_UART_CTS)
+		at91_set_B_periph(AT91_PIN_PC11, 0);	/* CTS2 */
+}
+
+static struct resource uart3_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_US3,
+		.end	= AT91SAM9G45_BASE_US3 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_US3,
+		.end	= AT91SAM9G45_ID_US3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart3_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static u64 uart3_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91sam9g45_uart3_device = {
+	.name		= "atmel_usart",
+	.id		= 4,
+	.dev		= {
+				.dma_mask		= &uart3_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &uart3_data,
+	},
+	.resource	= uart3_resources,
+	.num_resources	= ARRAY_SIZE(uart3_resources),
+};
+
+static inline void configure_usart3_pins(unsigned pins)
+{
+	at91_set_A_periph(AT91_PIN_PB8, 1);		/* TXD3 */
+	at91_set_A_periph(AT91_PIN_PB9, 0);		/* RXD3 */
+
+	if (pins & ATMEL_UART_RTS)
+		at91_set_B_periph(AT91_PIN_PA23, 0);	/* RTS3 */
+	if (pins & ATMEL_UART_CTS)
+		at91_set_B_periph(AT91_PIN_PA24, 0);	/* CTS3 */
+}
+
+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
+struct platform_device *atmel_default_console_device;	/* the serial console device */
+
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
+{
+	struct platform_device *pdev;
+
+	switch (id) {
+		case 0:		/* DBGU */
+			pdev = &at91sam9g45_dbgu_device;
+			configure_dbgu_pins();
+			at91_clock_associate("mck", &pdev->dev, "usart");
+			break;
+		case AT91SAM9G45_ID_US0:
+			pdev = &at91sam9g45_uart0_device;
+			configure_usart0_pins(pins);
+			at91_clock_associate("usart0_clk", &pdev->dev, "usart");
+			break;
+		case AT91SAM9G45_ID_US1:
+			pdev = &at91sam9g45_uart1_device;
+			configure_usart1_pins(pins);
+			at91_clock_associate("usart1_clk", &pdev->dev, "usart");
+			break;
+		case AT91SAM9G45_ID_US2:
+			pdev = &at91sam9g45_uart2_device;
+			configure_usart2_pins(pins);
+			at91_clock_associate("usart2_clk", &pdev->dev, "usart");
+			break;
+		case AT91SAM9G45_ID_US3:
+			pdev = &at91sam9g45_uart3_device;
+			configure_usart3_pins(pins);
+			at91_clock_associate("usart3_clk", &pdev->dev, "usart");
+			break;
+		default:
+			return;
+	}
+	pdev->id = portnr;		/* update to mapped ID */
+
+	if (portnr < ATMEL_MAX_UART)
+		at91_uarts[portnr] = pdev;
+}
+
+void __init at91_set_serial_console(unsigned portnr)
+{
+	if (portnr < ATMEL_MAX_UART)
+		atmel_default_console_device = at91_uarts[portnr];
+}
+
+void __init at91_add_device_serial(void)
+{
+	int i;
+
+	for (i = 0; i < ATMEL_MAX_UART; i++) {
+		if (at91_uarts[i])
+			platform_device_register(at91_uarts[i]);
+	}
+
+	if (!atmel_default_console_device)
+		printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+#else
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
+void __init at91_set_serial_console(unsigned portnr) {}
+void __init at91_add_device_serial(void) {}
+#endif
+
+
+/* -------------------------------------------------------------------- */
+/*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+static int __init at91_add_standard_devices(void)
+{
+	at91_add_device_rtc();
+	at91_add_device_rtt();
+	at91_add_device_watchdog();
+	at91_add_device_tc();
+	return 0;
+}
+
+arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
new file mode 100644
index 00000000000..b8558eae522
--- /dev/null
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -0,0 +1,389 @@
+/*
+ *  Board-specific setup code for the AT91SAM9M10G45 Evaluation Kit family
+ *
+ *  Covers: * AT91SAM9G45-EKES  board
+ *          * AT91SAM9M10G45-EK board
+ *
+ *  Copyright (C) 2009 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/fb.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <linux/clk.h>
+
+#include <mach/hardware.h>
+#include <video/atmel_lcdc.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91_shdwc.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+
+static void __init ek_map_io(void)
+{
+	/* Initialize processor: 12.000 MHz crystal */
+	at91sam9g45_initialize(12000000);
+
+	/* DGBU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 not connected on the -EK board */
+	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9G45_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init ek_init_irq(void)
+{
+	at91sam9g45_init_interrupts(NULL);
+}
+
+
+/*
+ * USB HS Host port (common to OHCI & EHCI)
+ */
+static struct at91_usbh_data __initdata ek_usbh_hs_data = {
+	.ports		= 2,
+	.vbus_pin	= {AT91_PIN_PD1, AT91_PIN_PD3},
+};
+
+
+/*
+ * USB HS Device port
+ */
+static struct usba_platform_data __initdata ek_usba_udc_data = {
+	.vbus_pin	= AT91_PIN_PB19,
+};
+
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info ek_spi_devices[] = {
+	{	/* DataFlash chip */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 0,
+		.max_speed_hz	= 15 * 1000 * 1000,
+		.bus_num	= 0,
+	},
+};
+
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata ek_macb_data = {
+	.phy_irq_pin	= AT91_PIN_PD5,
+	.is_rmii	= 1,
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+	{
+		.name	= "Partition 1",
+		.offset	= 0,
+		.size	= SZ_64M,
+	},
+	{
+		.name	= "Partition 2",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(ek_nand_partition);
+	return ek_nand_partition;
+}
+
+/* det_pin is not connected */
+static struct atmel_nand_data __initdata ek_nand_data = {
+	.ale		= 21,
+	.cle		= 22,
+	.rdy_pin	= AT91_PIN_PC8,
+	.enable_pin	= AT91_PIN_PC14,
+	.partition_info	= nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+	.bus_width_16	= 1,
+#else
+	.bus_width_16	= 0,
+#endif
+};
+
+static struct sam9_smc_config __initdata ek_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 2,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 2,
+
+	.ncs_read_pulse		= 4,
+	.nrd_pulse		= 4,
+	.ncs_write_pulse	= 4,
+	.nwe_pulse		= 4,
+
+	.read_cycle		= 7,
+	.write_cycle		= 7,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
+	.tdf_cycles		= 3,
+};
+
+static void __init ek_add_device_nand(void)
+{
+	/* setup bus-width (8 or 16) */
+	if (ek_nand_data.bus_width_16)
+		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
+	else
+		ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
+
+	/* configure chip-select 3 (NAND) */
+	sam9_smc_configure(3, &ek_nand_smc_config);
+
+	at91_add_device_nand(&ek_nand_data);
+}
+
+
+/*
+ * LCD Controller
+ */
+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+static struct fb_videomode at91_tft_vga_modes[] = {
+	{
+		.name           = "LG",
+		.refresh	= 60,
+		.xres		= 480,		.yres		= 272,
+		.pixclock	= KHZ2PICOS(9000),
+
+		.left_margin	= 1,		.right_margin	= 1,
+		.upper_margin	= 40,		.lower_margin	= 1,
+		.hsync_len	= 45,		.vsync_len	= 1,
+
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+};
+
+static struct fb_monspecs at91fb_default_monspecs = {
+	.manufacturer	= "LG",
+	.monitor        = "LB043WQ1",
+
+	.modedb		= at91_tft_vga_modes,
+	.modedb_len	= ARRAY_SIZE(at91_tft_vga_modes),
+	.hfmin		= 15000,
+	.hfmax		= 17640,
+	.vfmin		= 57,
+	.vfmax		= 67,
+};
+
+#define AT91SAM9G45_DEFAULT_LCDCON2 	(ATMEL_LCDC_MEMOR_LITTLE \
+					| ATMEL_LCDC_DISTYPE_TFT \
+					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
+
+/* Driver datas */
+static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+	.lcdcon_is_backlight		= true,
+	.default_bpp			= 32,
+	.default_dmacon			= ATMEL_LCDC_DMAEN,
+	.default_lcdcon2		= AT91SAM9G45_DEFAULT_LCDCON2,
+	.default_monspecs		= &at91fb_default_monspecs,
+	.guard_time			= 9,
+	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB,
+};
+
+#else
+static struct atmel_lcdfb_info __initdata ek_lcdc_data;
+#endif
+
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+	{	/* BP1, "leftclic" */
+		.code		= BTN_LEFT,
+		.gpio		= AT91_PIN_PB6,
+		.active_low	= 1,
+		.desc		= "left_click",
+		.wakeup		= 1,
+	},
+	{	/* BP2, "rightclic" */
+		.code		= BTN_RIGHT,
+		.gpio		= AT91_PIN_PB7,
+		.active_low	= 1,
+		.desc		= "right_click",
+		.wakeup		= 1,
+	},
+		/* BP3, "joystick" */
+	{
+		.code		= KEY_LEFT,
+		.gpio		= AT91_PIN_PB14,
+		.active_low	= 1,
+		.desc		= "Joystick Left",
+	},
+	{
+		.code		= KEY_RIGHT,
+		.gpio		= AT91_PIN_PB15,
+		.active_low	= 1,
+		.desc		= "Joystick Right",
+	},
+	{
+		.code		= KEY_UP,
+		.gpio		= AT91_PIN_PB16,
+		.active_low	= 1,
+		.desc		= "Joystick Up",
+	},
+	{
+		.code		= KEY_DOWN,
+		.gpio		= AT91_PIN_PB17,
+		.active_low	= 1,
+		.desc		= "Joystick Down",
+	},
+	{
+		.code		= KEY_ENTER,
+		.gpio		= AT91_PIN_PB18,
+		.active_low	= 1,
+		.desc		= "Joystick Press",
+	},
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+	.buttons	= ek_buttons,
+	.nbuttons	= ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &ek_button_data,
+	}
+};
+
+static void __init ek_add_device_buttons(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ek_buttons); i++) {
+		at91_set_GPIO_periph(ek_buttons[i].gpio, 1);
+		at91_set_deglitch(ek_buttons[i].gpio, 1);
+	}
+
+	platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+
+/*
+ * LEDs ... these could all be PWM-driven, for variable brightness
+ */
+static struct gpio_led ek_leds[] = {
+	{	/* "top" led, red, powerled */
+		.name			= "d8",
+		.gpio			= AT91_PIN_PD30,
+		.default_trigger	= "heartbeat",
+	},
+	{	/* "left" led, green, userled2, pwm3 */
+		.name			= "d6",
+		.gpio			= AT91_PIN_PD0,
+		.active_low		= 1,
+		.default_trigger	= "nand-disk",
+	},
+#if !(defined(CONFIG_LEDS_ATMEL_PWM) || defined(CONFIG_LEDS_ATMEL_PWM_MODULE))
+	{	/* "right" led, green, userled1, pwm1 */
+		.name			= "d7",
+		.gpio			= AT91_PIN_PD31,
+		.active_low		= 1,
+		.default_trigger	= "mmc0",
+	},
+#endif
+};
+
+
+/*
+ * PWM Leds
+ */
+static struct gpio_led ek_pwm_led[] = {
+#if defined(CONFIG_LEDS_ATMEL_PWM) || defined(CONFIG_LEDS_ATMEL_PWM_MODULE)
+	{	/* "right" led, green, userled1, pwm1 */
+		.name			= "d7",
+		.gpio			= 1,	/* is PWM channel number */
+		.active_low		= 1,
+		.default_trigger	= "none",
+	},
+#endif
+};
+
+
+
+static void __init ek_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* USB HS Host */
+	at91_add_device_usbh_ohci(&ek_usbh_hs_data);
+	/* USB HS Device */
+	at91_add_device_usba(&ek_usba_udc_data);
+	/* SPI */
+	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+	/* Ethernet */
+	at91_add_device_eth(&ek_macb_data);
+	/* NAND */
+	ek_add_device_nand();
+	/* I2C */
+	at91_add_device_i2c(0, NULL, 0);
+	/* LCD Controller */
+	at91_add_device_lcdc(&ek_lcdc_data);
+	/* Push Buttons */
+	ek_add_device_buttons();
+	/* LEDs */
+	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+	at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
+}
+
+MACHINE_START(AT91SAM9G45EKES, "Atmel AT91SAM9G45-EKES")
+	/* Maintainer: Atmel */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= ek_map_io,
+	.init_irq	= ek_init_irq,
+	.init_machine	= ek_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index b5daf7f5e01..88e413b3848 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -14,6 +14,7 @@ extern void __init at91sam9260_initialize(unsigned long main_clock);
 extern void __init at91sam9261_initialize(unsigned long main_clock);
 extern void __init at91sam9263_initialize(unsigned long main_clock);
 extern void __init at91sam9rl_initialize(unsigned long main_clock);
+extern void __init at91sam9g45_initialize(unsigned long main_clock);
 extern void __init at91x40_initialize(unsigned long main_clock);
 extern void __init at91cap9_initialize(unsigned long main_clock);
 
@@ -23,6 +24,7 @@ extern void __init at91sam9260_init_interrupts(unsigned int priority[]);
 extern void __init at91sam9261_init_interrupts(unsigned int priority[]);
 extern void __init at91sam9263_init_interrupts(unsigned int priority[]);
 extern void __init at91sam9rl_init_interrupts(unsigned int priority[]);
+extern void __init at91sam9g45_init_interrupts(unsigned int priority[]);
 extern void __init at91x40_init_interrupts(unsigned int priority[]);
 extern void __init at91cap9_init_interrupts(unsigned int priority[]);
 extern void __init at91_aic_init(unsigned int priority[]);
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index e6afff849b8..74801d275cd 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -80,7 +80,8 @@ struct at91_eth_data {
 };
 extern void __init at91_add_device_eth(struct at91_eth_data *data);
 
-#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9)
+#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9) \
+	|| defined(CONFIG_ARCH_AT91SAM9G45)
 #define eth_platform_data	at91_eth_data
 #endif
 
@@ -90,6 +91,7 @@ struct at91_usbh_data {
 	u8		vbus_pin[2];	/* port power-control pin */
 };
 extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
+extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data);
 
  /* NAND / SmartMedia */
 struct atmel_nand_data {
@@ -105,7 +107,11 @@ struct atmel_nand_data {
 extern void __init at91_add_device_nand(struct atmel_nand_data *data);
 
  /* I2C*/
+#if defined(CONFIG_ARCH_AT91SAM9G45)
+extern void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices);
+#else
 extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices);
+#endif
 
  /* SPI */
 extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
-- 
cgit v1.2.3


From eab4170865cce9b8898a813b7e8024de857a01da Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 26 Jun 2009 15:37:00 +0100
Subject: [ARM] 5567/1: at91: Support for at91sam9g10: clocks management

From: Hong Xu <hong.xu@atmel.com>

Add the at91sam9g10 support to the AT91 generic clock file. It takes
advantage of the management by functionalities of those PLLs and clocks.

Signed-off-by: Hong Xu <hong.xu@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/clock.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index 6396680271e..c042dcf4725 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -53,7 +53,7 @@
 #define cpu_has_800M_plla()	(  cpu_is_at91sam9g20() \
 				|| cpu_is_at91sam9g45())
 
-#define cpu_has_300M_plla()	(0)
+#define cpu_has_300M_plla()	(cpu_is_at91sam9g10())
 
 #define cpu_has_pllb()		(!(cpu_is_at91sam9rl() \
 				|| cpu_is_at91sam9g45()))
@@ -626,7 +626,9 @@ static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock)
 		uhpck.pmc_mask = AT91RM9200_PMC_UHP;
 		udpck.pmc_mask = AT91RM9200_PMC_UDP;
 		at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
-	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
+	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() ||
+		   cpu_is_at91sam9263() || cpu_is_at91sam9g20() ||
+		   cpu_is_at91sam9g10()) {
 		uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
 		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
 	} else if (cpu_is_at91cap9()) {
-- 
cgit v1.2.3


From b784b7c03723891876c9053c589150a4062f9455 Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 26 Jun 2009 15:36:59 +0100
Subject: [ARM] 5568/1: at91: Basic support for at91sam9g10: header files

From: Hong Xu <hong.xu@atmel.com>

AT91sam9g10 is an ARM 926ej-s SOC. It is an evolution of the at91sam9261 with a
faster clock speed: 266/133MHz.

Here is the basic header file support for this product.

Signed-off-by: Hong Xu <hong.xu@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/include/mach/at91sam9261.h | 3 +++
 arch/arm/mach-at91/include/mach/cpu.h         | 7 +++++++
 arch/arm/mach-at91/include/mach/hardware.h    | 2 +-
 arch/arm/mach-at91/include/mach/timex.h       | 5 +++++
 4 files changed, 16 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
index 3a348ca2077..87de8be1748 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9261.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
@@ -95,6 +95,9 @@
 #define AT91SAM9261_SRAM_BASE	0x00300000	/* Internal SRAM base address */
 #define AT91SAM9261_SRAM_SIZE	0x00028000	/* Internal SRAM size (160Kb) */
 
+#define AT91SAM9G10_SRAM_BASE	AT91SAM9261_SRAM_BASE	/* Internal SRAM base address */
+#define AT91SAM9G10_SRAM_SIZE	0x00004000	/* Internal SRAM size (16Kb) */
+
 #define AT91SAM9261_ROM_BASE	0x00400000	/* Internal ROM base address */
 #define AT91SAM9261_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
 
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index b73e7bf097d..34a9502c48b 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -21,6 +21,7 @@
 #define ARCH_ID_AT91SAM9260	0x019803a0
 #define ARCH_ID_AT91SAM9261	0x019703a0
 #define ARCH_ID_AT91SAM9263	0x019607a0
+#define ARCH_ID_AT91SAM9G10	0x819903a0
 #define ARCH_ID_AT91SAM9G20	0x019905a0
 #define ARCH_ID_AT91SAM9RL64	0x019b03a0
 #define ARCH_ID_AT91SAM9G45	0x819b05a0
@@ -97,6 +98,12 @@ static inline unsigned long at91cap9_rev_identify(void)
 #define cpu_is_at91sam9261()	(0)
 #endif
 
+#ifdef CONFIG_ARCH_AT91SAM9G10
+#define cpu_is_at91sam9g10()	(at91_cpu_identify() == ARCH_ID_AT91SAM9G10)
+#else
+#define cpu_is_at91sam9g10()	(0)
+#endif
+
 #ifdef CONFIG_ARCH_AT91SAM9263
 #define cpu_is_at91sam9263()	(at91_cpu_identify() == ARCH_ID_AT91SAM9263)
 #else
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index f0869170fa0..a0df8b022df 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -20,7 +20,7 @@
 #include <mach/at91rm9200.h>
 #elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
 #include <mach/at91sam9260.h>
-#elif defined(CONFIG_ARCH_AT91SAM9261)
+#elif defined(CONFIG_ARCH_AT91SAM9261) || defined(CONFIG_ARCH_AT91SAM9G10)
 #include <mach/at91sam9261.h>
 #elif defined(CONFIG_ARCH_AT91SAM9263)
 #include <mach/at91sam9263.h>
diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h
index 38f6c4250c7..31ac2d97f14 100644
--- a/arch/arm/mach-at91/include/mach/timex.h
+++ b/arch/arm/mach-at91/include/mach/timex.h
@@ -42,6 +42,11 @@
 #define AT91SAM9_MASTER_CLOCK	99300000
 #define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
 
+#elif defined(CONFIG_ARCH_AT91SAM9G10)
+
+#define AT91SAM9_MASTER_CLOCK	133000000
+#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
+
 #elif defined(CONFIG_ARCH_AT91SAM9263)
 
 #if defined(CONFIG_MACH_USB_A9263)
-- 
cgit v1.2.3


From b319ff80852e823c3a18778c839151784990f80b Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 26 Jun 2009 15:37:01 +0100
Subject: [ARM] 5570/1: at91: Support for at91sam9g10: core chip & board
 support

From: Hong Xu <hong.xu@atmel.com>

Here are the modification to at91sam9261 files dedicated to the support of
at91sam9g10. This direction has been adopted to minimize code duplication.

All at91sam9261 drivers are enabled in _devices and board- files. Modificaton
to peripherals that support at91sam9g10 will be added in future patches.

Signed-off-by: Hong Xu <hong.xu@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/Kconfig           | 25 +++++++++++++++++++++++--
 arch/arm/mach-at91/Makefile          |  2 ++
 arch/arm/mach-at91/at91sam9261.c     | 22 +++++++++++++++++++++-
 arch/arm/mach-at91/board-sam9261ek.c | 14 ++++++++++++++
 arch/arm/mach-at91/pm.c              |  3 ++-
 5 files changed, 62 insertions(+), 4 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 22309ba97fa..8f3e15abdb6 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -23,6 +23,12 @@ config ARCH_AT91SAM9261
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 
+config ARCH_AT91SAM9G10
+	bool "AT91SAM9G10"
+	select CPU_ARM926T
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+
 config ARCH_AT91SAM9263
 	bool "AT91SAM9263"
 	select CPU_ARM926T
@@ -230,6 +236,21 @@ endif
 
 # ----------------------------------------------------------
 
+if ARCH_AT91SAM9G10
+
+comment "AT91SAM9G10 Board Type"
+
+config MACH_AT91SAM9G10EK
+	bool "Atmel AT91SAM9G10-EK Evaluation Kit"
+	depends on ARCH_AT91SAM9G10
+	help
+	  Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
+
+endif
+
+# ----------------------------------------------------------
+
 if ARCH_AT91SAM9263
 
 comment "AT91SAM9263 Board Type"
@@ -337,13 +358,13 @@ comment "AT91 Board Options"
 
 config MTD_AT91_DATAFLASH_CARD
 	bool "Enable DataFlash Card support"
-	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_NEOCORE926)
+	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_NEOCORE926)
 	help
 	  Enable support for the DataFlash card.
 
 config MTD_NAND_ATMEL_BUSWIDTH_16
 	bool "Enable 16-bit data bus interface to NAND flash"
-	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
+	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
 	help
 	  On AT91SAM926x boards both types of NAND flash can be present
 	  (8 and 16 bit data bus width).
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 2975f9ab861..4eaf80abe10 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_AT91_PMC_UNIT)	+= clock.o
 obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9G10)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9G20)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o  sam9_smc.o
@@ -44,6 +45,7 @@ obj-$(CONFIG_MACH_AFEB9260)	+= board-afeb-9260v1.o
 
 # AT91SAM9261 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
+obj-$(CONFIG_MACH_AT91SAM9G10EK) += board-sam9261ek.o
 
 # AT91SAM9263 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 3acd7d7e6a4..4ecf37996c7 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -16,6 +16,7 @@
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <mach/cpu.h>
 #include <mach/at91sam9261.h>
 #include <mach/at91_pmc.h>
 #include <mach/at91_rstc.h>
@@ -30,7 +31,11 @@ static struct map_desc at91sam9261_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
-	}, {
+	},
+};
+
+static struct map_desc at91sam9261_sram_desc[] __initdata = {
+	{
 		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9261_SRAM_SIZE,
 		.pfn		= __phys_to_pfn(AT91SAM9261_SRAM_BASE),
 		.length		= AT91SAM9261_SRAM_SIZE,
@@ -38,6 +43,15 @@ static struct map_desc at91sam9261_io_desc[] __initdata = {
 	},
 };
 
+static struct map_desc at91sam9g10_sram_desc[] __initdata = {
+	{
+		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9G10_SRAM_SIZE,
+		.pfn		= __phys_to_pfn(AT91SAM9G10_SRAM_BASE),
+		.length		= AT91SAM9G10_SRAM_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
 /* --------------------------------------------------------------------
  *  Clocks
  * -------------------------------------------------------------------- */
@@ -263,6 +277,12 @@ void __init at91sam9261_initialize(unsigned long main_clock)
 	/* Map peripherals */
 	iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc));
 
+	if (cpu_is_at91sam9g10())
+		iotable_init(at91sam9g10_sram_desc, ARRAY_SIZE(at91sam9g10_sram_desc));
+	else
+		iotable_init(at91sam9261_sram_desc, ARRAY_SIZE(at91sam9261_sram_desc));
+
+
 	at91_arch_reset = at91sam9261_reset;
 	pm_power_off = at91sam9261_poweroff;
 	at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index d5266da5531..f9b19993a7a 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -287,7 +287,11 @@ static void __init ek_add_device_ts(void) {}
  */
 static struct at73c213_board_info at73c213_data = {
 	.ssc_id		= 1,
+#if defined(CONFIG_MACH_AT91SAM9261EK)
 	.shortname	= "AT91SAM9261-EK external DAC",
+#else
+	.shortname	= "AT91SAM9G10-EK external DAC",
+#endif
 };
 
 #if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
@@ -414,6 +418,9 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
 	.default_monspecs		= &at91fb_default_stn_monspecs,
 	.atmel_lcdfb_power_control	= at91_lcdc_stn_power_control,
 	.guard_time			= 1,
+#if defined(CONFIG_MACH_AT91SAM9G10EK)
+	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB,
+#endif
 };
 
 #else
@@ -467,6 +474,9 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
 	.default_monspecs		= &at91fb_default_tft_monspecs,
 	.atmel_lcdfb_power_control	= at91_lcdc_tft_power_control,
 	.guard_time			= 1,
+#if defined(CONFIG_MACH_AT91SAM9G10EK)
+	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB,
+#endif
 };
 #endif
 
@@ -600,7 +610,11 @@ static void __init ek_board_init(void)
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
 }
 
+#if defined(CONFIG_MACH_AT91SAM9261EK)
 MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
+#else
+MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK")
+#endif
 	/* Maintainer: Atmel */
 	.phys_io	= AT91_BASE_SYS,
 	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index e26c4fe61fa..4028724d490 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -201,7 +201,8 @@ static int at91_pm_verify_clocks(void)
 			pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
 			return 0;
 		}
-	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
+	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()
+			|| cpu_is_at91sam9g20() || cpu_is_at91sam9g10()) {
 		if ((scsr & (AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP)) != 0) {
 			pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
 			return 0;
-- 
cgit v1.2.3


From 87e8824b4588076409692b82ef4b1d98f25cd400 Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Thu, 2 Jul 2009 15:28:41 +0100
Subject: [ARM] 5582/1: VIC: support ST-modified version with a split init

The Nomadik SoC (not yet merged) has a modified PL090 VIC cell. This adds
support for it by reading the PrimeCell ID at the end of the page and
calling a separate init function.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/common/vic.c | 88 +++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 88 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index 6ed89836e90..27714ab30f2 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -259,6 +259,15 @@ static struct irq_chip vic_chip = {
 	.set_wake = vic_set_wake,
 };
 
+/* The PL190 cell from ARM has been modified by ST, so handle both here */
+static void vik_init_st(void __iomem *base, unsigned int irq_start,
+			 u32 vic_sources);
+
+enum vic_vendor {
+	VENDOR_ARM = 0x41,
+	VENDOR_ST = 0x80,
+};
+
 /**
  * vic_init - initialise a vectored interrupt controller
  * @base: iomem base address
@@ -270,6 +279,28 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 		     u32 vic_sources, u32 resume_sources)
 {
 	unsigned int i;
+	u32 cellid = 0;
+	enum vic_vendor vendor;
+
+	/* Identify which VIC cell this one is, by reading the ID */
+	for (i = 0; i < 4; i++) {
+		u32 addr = ((u32)base & PAGE_MASK) + 0xfe0 + (i * 4);
+		cellid |= (readl(addr) & 0xff) << (8 * i);
+	}
+	vendor = (cellid >> 12) & 0xff;
+	printk(KERN_INFO "VIC @%p: id 0x%08x, vendor 0x%02x\n",
+	       base, cellid, vendor);
+
+	switch(vendor) {
+	case VENDOR_ST:
+		vik_init_st(base, irq_start, vic_sources);
+		return;
+	default:
+		printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
+		/* fall through */
+	case VENDOR_ARM:
+		break;
+	}
 
 	/* Disable all interrupts initially. */
 
@@ -306,3 +337,60 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 
 	vic_pm_register(base, irq_start, resume_sources);
 }
+
+/*
+ * The PL190 cell from ARM has been modified by ST to handle 64 interrupts.
+ * The original cell has 32 interrupts, while the modified one has 64,
+ * replocating two blocks 0x00..0x1f in 0x20..0x3f. In that case
+ * the probe function is called twice, with base set to offset 000
+ *  and 020 within the page. We call this "second block".
+ */
+static void __init vik_init_st(void __iomem *base, unsigned int irq_start,
+				u32 vic_sources)
+{
+	unsigned int i;
+	int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0;
+
+	/* Disable all interrupts initially. */
+
+	writel(0, base + VIC_INT_SELECT);
+	writel(0, base + VIC_INT_ENABLE);
+	writel(~0, base + VIC_INT_ENABLE_CLEAR);
+	writel(0, base + VIC_IRQ_STATUS);
+	writel(0, base + VIC_ITCR);
+	writel(~0, base + VIC_INT_SOFT_CLEAR);
+
+	/*
+	 * Make sure we clear all existing interrupts. The vector registers
+	 * in this cell are after the second block of general registers,
+	 * so we can address them using standard offsets, but only from
+	 * the second base address, which is 0x20 in the page
+	 */
+	if (vic_2nd_block) {
+		writel(0, base + VIC_PL190_VECT_ADDR);
+		for (i = 0; i < 19; i++) {
+			unsigned int value;
+
+			value = readl(base + VIC_PL190_VECT_ADDR);
+			writel(value, base + VIC_PL190_VECT_ADDR);
+		}
+		/* ST has 16 vectors as well, but we don't enable them by now */
+		for (i = 0; i < 16; i++) {
+			void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
+			writel(0, reg);
+		}
+
+		writel(32, base + VIC_PL190_DEF_VECT_ADDR);
+	}
+
+	for (i = 0; i < 32; i++) {
+		if (vic_sources & (1 << i)) {
+			unsigned int irq = irq_start + i;
+
+			set_irq_chip(irq, &vic_chip);
+			set_irq_chip_data(irq, base);
+			set_irq_handler(irq, handle_level_irq);
+			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+		}
+	}
+}
-- 
cgit v1.2.3


From 8c81b52422147b4b09f5adb8d0c6963342a336c6 Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Thu, 2 Jul 2009 15:28:52 +0100
Subject: [ARM] 5583/1: VIC: acknowledge software interrupts

The PrimeCell Vectored Interrupt Controller offers a way to trigger
any interrupt through software. This is a useful tool for developing,
but such software interrupt can only be acked by writing a bit in the
"software clear" register, or the handler will loop forever.  This
splits ack from mask, and acks the soft irq in case it was the source.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/common/vic.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index 27714ab30f2..bc1f9ad61ff 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -26,6 +26,15 @@
 #include <asm/mach/irq.h>
 #include <asm/hardware/vic.h>
 
+static void vic_ack_irq(unsigned int irq)
+{
+	void __iomem *base = get_irq_chip_data(irq);
+	irq &= 31;
+	writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
+	/* moreover, clear the soft-triggered, in case it was the reason */
+	writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
+}
+
 static void vic_mask_irq(unsigned int irq)
 {
 	void __iomem *base = get_irq_chip_data(irq);
@@ -253,7 +262,7 @@ static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg
 
 static struct irq_chip vic_chip = {
 	.name	= "VIC",
-	.ack	= vic_mask_irq,
+	.ack	= vic_ack_irq,
 	.mask	= vic_mask_irq,
 	.unmask	= vic_unmask_irq,
 	.set_wake = vic_set_wake,
-- 
cgit v1.2.3


From 28ad94ec61dc60207dbffdb95ff870c617fbb832 Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Thu, 2 Jul 2009 19:06:47 +0100
Subject: [ARM] 5590/1: Add basic support for ST Nomadik 8815 SoC and
 evaluation board

This patch adds the basic infrastructure for the Nomadik 8815
CPU and the "Nomadik Hardware Kit" NHK8815. This patch only
includes the serial console and core stuff, no drivers.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig                                 |  15 +++
 arch/arm/Makefile                                |   1 +
 arch/arm/mach-nomadik/Kconfig                    |  14 ++
 arch/arm/mach-nomadik/Makefile                   |  16 +++
 arch/arm/mach-nomadik/Makefile.boot              |   4 +
 arch/arm/mach-nomadik/board-nhk8815.c            |  75 +++++++++++
 arch/arm/mach-nomadik/clock.c                    |  45 +++++++
 arch/arm/mach-nomadik/clock.h                    |  14 ++
 arch/arm/mach-nomadik/cpu-8815.c                 |  58 ++++++++
 arch/arm/mach-nomadik/include/mach/clkdev.h      |   7 +
 arch/arm/mach-nomadik/include/mach/debug-macro.S |  22 +++
 arch/arm/mach-nomadik/include/mach/entry-macro.S |  43 ++++++
 arch/arm/mach-nomadik/include/mach/hardware.h    |  90 +++++++++++++
 arch/arm/mach-nomadik/include/mach/io.h          |  22 +++
 arch/arm/mach-nomadik/include/mach/irqs.h        |  82 ++++++++++++
 arch/arm/mach-nomadik/include/mach/memory.h      |  28 ++++
 arch/arm/mach-nomadik/include/mach/mtu.h         |  45 +++++++
 arch/arm/mach-nomadik/include/mach/setup.h       |  22 +++
 arch/arm/mach-nomadik/include/mach/system.h      |  45 +++++++
 arch/arm/mach-nomadik/include/mach/timex.h       |   6 +
 arch/arm/mach-nomadik/include/mach/uncompress.h  |  63 +++++++++
 arch/arm/mach-nomadik/include/mach/vmalloc.h     |   2 +
 arch/arm/mach-nomadik/timer.c                    | 164 +++++++++++++++++++++++
 23 files changed, 883 insertions(+)
 create mode 100644 arch/arm/mach-nomadik/Kconfig
 create mode 100644 arch/arm/mach-nomadik/Makefile
 create mode 100644 arch/arm/mach-nomadik/Makefile.boot
 create mode 100644 arch/arm/mach-nomadik/board-nhk8815.c
 create mode 100644 arch/arm/mach-nomadik/clock.c
 create mode 100644 arch/arm/mach-nomadik/clock.h
 create mode 100644 arch/arm/mach-nomadik/cpu-8815.c
 create mode 100644 arch/arm/mach-nomadik/include/mach/clkdev.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/debug-macro.S
 create mode 100644 arch/arm/mach-nomadik/include/mach/entry-macro.S
 create mode 100644 arch/arm/mach-nomadik/include/mach/hardware.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/io.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/irqs.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/memory.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/mtu.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/setup.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/system.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/timex.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/uncompress.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/vmalloc.h
 create mode 100644 arch/arm/mach-nomadik/timer.c

(limited to 'arch/arm')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aef63c8e3d2..d8cfd706501 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -327,6 +327,19 @@ config ARCH_H720X
 	help
 	  This enables support for systems based on the Hynix HMS720x
 
+config ARCH_NOMADIK
+	bool "STMicroelectronics Nomadik"
+	select ARM_AMBA
+	select ARM_VIC
+	select CPU_ARM926T
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+
+	help
+	  Support for the Nomadik platform by ST-Ericsson
+
 config ARCH_IOP13XX
 	bool "IOP13xx-based"
 	depends on MMU
@@ -716,6 +729,8 @@ source "arch/arm/mach-at91/Kconfig"
 
 source "arch/arm/plat-mxc/Kconfig"
 
+source "arch/arm/mach-nomadik/Kconfig"
+
 source "arch/arm/mach-netx/Kconfig"
 
 source "arch/arm/mach-ns9xxx/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c877d6df23d..97cca075d0f 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -137,6 +137,7 @@ machine-$(CONFIG_ARCH_MX1)		:= mx1
 machine-$(CONFIG_ARCH_MX2)		:= mx2
 machine-$(CONFIG_ARCH_MX3)		:= mx3
 machine-$(CONFIG_ARCH_NETX)		:= netx
+machine-$(CONFIG_ARCH_NOMADIK)		:= nomadik
 machine-$(CONFIG_ARCH_NS9XXX)		:= ns9xxx
 machine-$(CONFIG_ARCH_OMAP1)		:= omap1
 machine-$(CONFIG_ARCH_OMAP2)		:= omap2
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
new file mode 100644
index 00000000000..abce2346106
--- /dev/null
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -0,0 +1,14 @@
+if ARCH_NOMADIK
+
+menu "Nomadik boards"
+
+config MACH_NOMADIK_8815NHK
+	bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
+	select NOMADIK_8815
+
+endmenu
+
+config NOMADIK_8815
+	bool
+
+endif
diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile
new file mode 100644
index 00000000000..fa97769fe70
--- /dev/null
+++ b/arch/arm/mach-nomadik/Makefile
@@ -0,0 +1,16 @@
+#
+# Makefile for the linux kernel.
+#
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+
+# Object file lists.
+
+obj-y			+= clock.o timer.o
+
+# Cpu revision
+obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o
+
+# Specific board support
+obj-$(CONFIG_MACH_NOMADIK_8815NHK) += board-nhk8815.o
diff --git a/arch/arm/mach-nomadik/Makefile.boot b/arch/arm/mach-nomadik/Makefile.boot
new file mode 100644
index 00000000000..c7e75acfe6c
--- /dev/null
+++ b/arch/arm/mach-nomadik/Makefile.boot
@@ -0,0 +1,4 @@
+   zreladdr-y	:= 0x00008000
+params_phys-y	:= 0x00000100
+initrd_phys-y	:= 0x00800000
+
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
new file mode 100644
index 00000000000..eebca614d36
--- /dev/null
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -0,0 +1,75 @@
+/*
+ *  linux/arch/arm/mach-nomadik/board-8815nhk.c
+ *
+ *  Copyright (C) STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ *  NHK15 board specifc driver definition
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/amba/bus.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/setup.h>
+#include "clock.h"
+
+#define __MEM_4K_RESOURCE(x) \
+	.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+
+static struct amba_device uart0_device = {
+	.dev = { .init_name = "uart0" },
+	__MEM_4K_RESOURCE(NOMADIK_UART0_BASE),
+	.irq = {IRQ_UART0, NO_IRQ},
+};
+
+static struct amba_device uart1_device = {
+	.dev = { .init_name = "uart1" },
+	__MEM_4K_RESOURCE(NOMADIK_UART1_BASE),
+	.irq = {IRQ_UART1, NO_IRQ},
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+	&uart0_device,
+	&uart1_device,
+};
+
+/* We have a fixed clock alone, by now */
+static struct clk nhk8815_clk_48 = {
+	.rate = 48*1000*1000,
+};
+
+static struct platform_device *nhk8815_platform_devices[] __initdata = {
+	/* currently empty, will add keypad, touchscreen etc */
+};
+
+static void __init nhk8815_platform_init(void)
+{
+	int i;
+
+	cpu8815_platform_init();
+	platform_add_devices(nhk8815_platform_devices,
+			     ARRAY_SIZE(nhk8815_platform_devices));
+
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+		nmdk_clk_create(&nhk8815_clk_48, amba_devs[i]->dev.init_name);
+		amba_device_register(amba_devs[i], &iomem_resource);
+	}
+}
+
+MACHINE_START(NOMADIK, "NHK8815")
+	/* Maintainer: ST MicroElectronics */
+	.phys_io	= NOMADIK_UART0_BASE,
+	.io_pg_offst	= (IO_ADDRESS(NOMADIK_UART0_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x100,
+	.map_io		= cpu8815_map_io,
+	.init_irq	= cpu8815_init_irq,
+	.timer		= &nomadik_timer,
+	.init_machine	= nhk8815_platform_init,
+MACHINE_END
diff --git a/arch/arm/mach-nomadik/clock.c b/arch/arm/mach-nomadik/clock.c
new file mode 100644
index 00000000000..9f92502a008
--- /dev/null
+++ b/arch/arm/mach-nomadik/clock.c
@@ -0,0 +1,45 @@
+/*
+ *  linux/arch/arm/mach-nomadik/clock.c
+ *
+ *  Copyright (C) 2009 Alessandro Rubini
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <asm/clkdev.h>
+#include "clock.h"
+
+/*
+ * The nomadik board uses generic clocks, but the serial pl011 file
+ * calls clk_enable(), clk_disable(), clk_get_rate(), so we provide them
+ */
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/* enable and disable do nothing */
+int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+/* Create a clock structure with the given name */
+int nmdk_clk_create(struct clk *clk, const char *dev_id)
+{
+	struct clk_lookup *clkdev;
+
+	clkdev = clkdev_alloc(clk, NULL, dev_id);
+	if (!clkdev)
+		return -ENOMEM;
+	clkdev_add(clkdev);
+	return 0;
+}
diff --git a/arch/arm/mach-nomadik/clock.h b/arch/arm/mach-nomadik/clock.h
new file mode 100644
index 00000000000..235faec7f62
--- /dev/null
+++ b/arch/arm/mach-nomadik/clock.h
@@ -0,0 +1,14 @@
+
+/*
+ *  linux/arch/arm/mach-nomadik/clock.h
+ *
+ *  Copyright (C) 2009 Alessandro Rubini
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+struct clk {
+	unsigned long		rate;
+};
+extern int nmdk_clk_create(struct clk *clk, const char *dev_id);
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
new file mode 100644
index 00000000000..dec42da6956
--- /dev/null
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright STMicroelectronics, 2007.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <asm/mach/map.h>
+#include <asm/hardware/vic.h>
+
+/* All SoC devices live in the same area (see hardware.h) */
+static struct map_desc nomadik_io_desc[] __initdata = {
+	{
+		.virtual =	NOMADIK_IO_VIRTUAL,
+		.pfn =		__phys_to_pfn(NOMADIK_IO_PHYSICAL),
+		.length =	NOMADIK_IO_SIZE,
+		.type = 	MT_DEVICE,
+	}
+	/* static ram and secured ram may be added later */
+};
+
+void __init cpu8815_map_io(void)
+{
+	iotable_init(nomadik_io_desc, ARRAY_SIZE(nomadik_io_desc));
+}
+
+void __init cpu8815_init_irq(void)
+{
+	/* This modified VIC cell has two register blocks, at 0 and 0x20 */
+	vic_init(io_p2v(NOMADIK_IC_BASE + 0x00), IRQ_VIC_START +  0, ~0, 0);
+	vic_init(io_p2v(NOMADIK_IC_BASE + 0x20), IRQ_VIC_START + 32, ~0, 0);
+}
+
+/*
+ * This function is called from the board init ("init_machine").
+ * Currently nothing is done as we can't register amba devs so early.
+ */
+ void __init cpu8815_platform_init(void)
+{
+	 return;
+}
diff --git a/arch/arm/mach-nomadik/include/mach/clkdev.h b/arch/arm/mach-nomadik/include/mach/clkdev.h
new file mode 100644
index 00000000000..04b37a89801
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-nomadik/include/mach/debug-macro.S b/arch/arm/mach-nomadik/include/mach/debug-macro.S
new file mode 100644
index 00000000000..e876990e156
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/debug-macro.S
@@ -0,0 +1,22 @@
+/*
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x10000000	@ physical base address
+		movne	\rx, #0xf0000000	@ virtual base
+		add	\rx, \rx, #0x00100000
+		add	\rx, \rx, #0x000fb000
+		.endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-nomadik/include/mach/entry-macro.S b/arch/arm/mach-nomadik/include/mach/entry-macro.S
new file mode 100644
index 00000000000..49f1aa3bb42
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/entry-macro.S
@@ -0,0 +1,43 @@
+/*
+ * Low-level IRQ helper macros for Nomadik platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro	get_irqnr_preamble, base, tmp
+	ldr	\base, =IO_ADDRESS(NOMADIK_IC_BASE)
+	.endm
+
+	.macro	arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+	/* This stanza gets the irq mask from one of two status registers */
+	mov	\irqnr, #0
+	ldr	\irqstat, [\base, #VIC_REG_IRQSR0]	@ get masked status
+	cmp	\irqstat, #0
+	bne	1001f
+	add	\irqnr, \irqnr, #32
+	ldr	\irqstat, [\base, #VIC_REG_IRQSR1]	@ get masked status
+
+1001:	tst	\irqstat, #15
+	bne	1002f
+	add	\irqnr, \irqnr, #4
+	movs	\irqstat, \irqstat, lsr #4
+	bne	1001b
+1002:	tst	\irqstat, #1
+	bne	1003f
+	add	\irqnr, \irqnr, #1
+	movs	\irqstat, \irqstat, lsr #1
+	bne	1002b
+1003:	/* EQ will be set if no irqs pending */
+	.endm
diff --git a/arch/arm/mach-nomadik/include/mach/hardware.h b/arch/arm/mach-nomadik/include/mach/hardware.h
new file mode 100644
index 00000000000..6316dba3bfc
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/hardware.h
@@ -0,0 +1,90 @@
+/*
+ * This file contains the hardware definitions of the Nomadik.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * YOU should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/* Nomadik registers live from 0x1000.0000 to 0x1023.0000 -- currently */
+#define NOMADIK_IO_VIRTUAL	0xF0000000	/* VA of IO  */
+#define NOMADIK_IO_PHYSICAL	0x10000000	/* PA of IO */
+#define NOMADIK_IO_SIZE		0x00300000	/* 3MB for all regs */
+
+/* used in C code, so cast to proper type */
+#define io_p2v(x) ((void __iomem *)(x) \
+			- NOMADIK_IO_PHYSICAL + NOMADIK_IO_VIRTUAL)
+#define io_v2p(x) ((unsigned long)(x) \
+			- NOMADIK_IO_VIRTUAL + NOMADIK_IO_PHYSICAL)
+
+/* used in asm code, so no casts */
+#define IO_ADDRESS(x) ((x) - NOMADIK_IO_PHYSICAL + NOMADIK_IO_VIRTUAL)
+
+/*
+ *   Base address defination for Nomadik Onchip Logic Block
+ */
+#define NOMADIK_FSMC_BASE	0x10100000	/* FSMC registers */
+#define NOMADIK_SDRAMC_BASE	0x10110000	/* SDRAM Controller */
+#define NOMADIK_CLCDC_BASE	0x10120000	/* CLCD Controller */
+#define NOMADIK_MDIF_BASE	0x10120000	/* MDIF */
+#define NOMADIK_DMA0_BASE	0x10130000	/* DMA0 Controller */
+#define NOMADIK_IC_BASE		0x10140000	/* Vectored Irq Controller */
+#define NOMADIK_DMA1_BASE	0x10150000	/* DMA1 Controller */
+#define NOMADIK_USB_BASE	0x10170000	/* USB-OTG conf reg base */
+#define NOMADIK_CRYP_BASE	0x10180000	/* Crypto processor */
+#define NOMADIK_SHA1_BASE	0x10190000	/* SHA-1 Processor */
+#define NOMADIK_XTI_BASE	0x101A0000	/* XTI */
+#define NOMADIK_RNG_BASE	0x101B0000	/* Random number generator */
+#define NOMADIK_SRC_BASE	0x101E0000	/* SRC base */
+#define NOMADIK_WDOG_BASE	0x101E1000	/* Watchdog */
+#define NOMADIK_MTU0_BASE	0x101E2000	/* Multiple Timer 0 */
+#define NOMADIK_MTU1_BASE	0x101E3000	/* Multiple Timer 1 */
+#define NOMADIK_GPIO0_BASE	0x101E4000	/* GPIO0 */
+#define NOMADIK_GPIO1_BASE	0x101E5000	/* GPIO1 */
+#define NOMADIK_GPIO2_BASE	0x101E6000	/* GPIO2 */
+#define NOMADIK_GPIO3_BASE	0x101E7000	/* GPIO3 */
+#define NOMADIK_RTC_BASE	0x101E8000	/* Real Time Clock base */
+#define NOMADIK_PMU_BASE	0x101E9000	/* Power Management Unit */
+#define NOMADIK_OWM_BASE	0x101EA000	/* One wire master */
+#define NOMADIK_SCR_BASE	0x101EF000	/* Secure Control registers */
+#define NOMADIK_MSP2_BASE	0x101F0000	/* MSP 2 interface */
+#define NOMADIK_MSP1_BASE	0x101F1000	/* MSP 1 interface */
+#define NOMADIK_UART2_BASE	0x101F2000	/* UART 2 interface */
+#define NOMADIK_SSIRx_BASE	0x101F3000	/* SSI 8-ch rx interface */
+#define NOMADIK_SSITx_BASE	0x101F4000	/* SSI 8-ch tx interface */
+#define NOMADIK_MSHC_BASE	0x101F5000	/* Memory Stick(Pro) Host */
+#define NOMADIK_SDI_BASE	0x101F6000	/* SD-card/MM-Card */
+#define NOMADIK_I2C1_BASE	0x101F7000	/* I2C1 interface */
+#define NOMADIK_I2C0_BASE	0x101F8000	/* I2C0 interface */
+#define NOMADIK_MSP0_BASE	0x101F9000	/* MSP 0 interface  */
+#define NOMADIK_FIRDA_BASE	0x101FA000	/* FIrDA interface  */
+#define NOMADIK_UART1_BASE	0x101FB000	/* UART 1 interface */
+#define NOMADIK_SSP_BASE	0x101FC000	/* SSP interface  */
+#define NOMADIK_UART0_BASE	0x101FD000	/* UART 0 interface */
+#define NOMADIK_SGA_BASE	0x101FE000	/* SGA interface */
+#define NOMADIK_L2CC_BASE	0x10210000	/* L2 Cache controller */
+
+/* Other ranges, not for p2v/v2p */
+#define NOMADIK_BACKUP_RAM	0x80010000
+#define NOMADIK_EBROM		0x80000000	/* Embedded boot ROM */
+#define NOMADIK_HAMACV_DMEM_BASE 0xA0100000	/* HAMACV Data Memory Start */
+#define NOMADIK_HAMACV_DMEM_END	0xA01FFFFF	/* HAMACV Data Memory End */
+#define NOMADIK_HAMACA_DMEM	0xA0200000	/* HAMACA Data Memory Space */
+
+#define NOMADIK_FSMC_VA		IO_ADDRESS(NOMADIK_FSMC_BASE)
+#define NOMADIK_MTU0_VA		IO_ADDRESS(NOMADIK_MTU0_BASE)
+#define NOMADIK_MTU1_VA		IO_ADDRESS(NOMADIK_MTU1_BASE)
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-nomadik/include/mach/io.h b/arch/arm/mach-nomadik/include/mach/io.h
new file mode 100644
index 00000000000..2e1eca1b824
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/io.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-nomadik/include/mach/io.h   (copied from mach-sa1100)
+ *
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * Modifications:
+ *  06-12-1997  RMK     Created.
+ *  07-04-1999  RMK     Major cleanup
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)         __typesafe_io(a)
+#define __mem_pci(a)    (a)
+
+#endif
diff --git a/arch/arm/mach-nomadik/include/mach/irqs.h b/arch/arm/mach-nomadik/include/mach/irqs.h
new file mode 100644
index 00000000000..8faabc56039
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/irqs.h
@@ -0,0 +1,82 @@
+/*
+ *  mach-nomadik/include/mach/irqs.h
+ *
+ *  Copyright (C) ST Microelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include <mach/hardware.h>
+
+#define IRQ_VIC_START		0	/* first VIC interrupt is 0 */
+
+/*
+ * Interrupt numbers generic for all Nomadik Chip cuts
+ */
+#define IRQ_WATCHDOG			0
+#define IRQ_SOFTINT			1
+#define IRQ_CRYPTO			2
+#define IRQ_OWM				3
+#define IRQ_MTU0			4
+#define IRQ_MTU1			5
+#define IRQ_GPIO0			6
+#define IRQ_GPIO1			7
+#define IRQ_GPIO2			8
+#define IRQ_GPIO3			9
+#define IRQ_RTC_RTT			10
+#define IRQ_SSP				11
+#define IRQ_UART0			12
+#define IRQ_DMA1			13
+#define IRQ_CLCD_MDIF			14
+#define IRQ_DMA0			15
+#define IRQ_PWRFAIL			16
+#define IRQ_UART1			17
+#define IRQ_FIRDA			18
+#define IRQ_MSP0			19
+#define IRQ_I2C0			20
+#define IRQ_I2C1			21
+#define IRQ_SDMMC			22
+#define IRQ_USBOTG			23
+#define IRQ_SVA_IT0			24
+#define IRQ_SVA_IT1			25
+#define IRQ_SAA_IT0			26
+#define IRQ_SAA_IT1			27
+#define IRQ_UART2			28
+#define IRQ_MSP2			31
+#define IRQ_L2CC			48
+#define IRQ_HPI				49
+#define IRQ_SKE				50
+#define IRQ_KP				51
+#define IRQ_MEMST			54
+#define IRQ_SGA_IT			58
+#define IRQ_USBM			60
+#define IRQ_MSP1			62
+
+#define NOMADIK_SOC_NR_IRQS		64
+
+/* After chip-specific IRQ numbers we have the GPIO ones */
+#define NOMADIK_NR_GPIO			128 /* last 4 not wired to pins */
+#define NOMADIK_GPIO_TO_IRQ(gpio)	((gpio) + NOMADIK_SOC_NR_IRQS)
+#define NOMADIK_IRQ_TO_GPIO(irq)	((irq) - NOMADIK_SOC_NR_IRQS)
+#define NR_IRQS				NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
+
+/* Following two are used by entry_macro.S, to access our dual-vic */
+#define VIC_REG_IRQSR0		0
+#define VIC_REG_IRQSR1		0x20
+
+#endif /* __ASM_ARCH_IRQS_H */
+
diff --git a/arch/arm/mach-nomadik/include/mach/memory.h b/arch/arm/mach-nomadik/include/mach/memory.h
new file mode 100644
index 00000000000..1e5689d98ec
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/memory.h
@@ -0,0 +1,28 @@
+/*
+ *  mach-nomadik/include/mach/memory.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x00000000)
+
+#endif
diff --git a/arch/arm/mach-nomadik/include/mach/mtu.h b/arch/arm/mach-nomadik/include/mach/mtu.h
new file mode 100644
index 00000000000..76da7f08533
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/mtu.h
@@ -0,0 +1,45 @@
+#ifndef __ASM_ARCH_MTU_H
+#define __ASM_ARCH_MTU_H
+
+/*
+ * The MTU device hosts four different counters, with 4 set of
+ * registers. These are register names.
+ */
+
+#define MTU_IMSC	0x00	/* Interrupt mask set/clear */
+#define MTU_RIS		0x04	/* Raw interrupt status */
+#define MTU_MIS		0x08	/* Masked interrupt status */
+#define MTU_ICR		0x0C	/* Interrupt clear register */
+
+/* per-timer registers take 0..3 as argument */
+#define MTU_LR(x)	(0x10 + 0x10 * (x) + 0x00)	/* Load value */
+#define MTU_VAL(x)	(0x10 + 0x10 * (x) + 0x04)	/* Current value */
+#define MTU_CR(x)	(0x10 + 0x10 * (x) + 0x08)	/* Control reg */
+#define MTU_BGLR(x)	(0x10 + 0x10 * (x) + 0x0c)	/* At next overflow */
+
+/* bits for the control register */
+#define MTU_CRn_ENA		0x80
+#define MTU_CRn_PERIODIC	0x40	/* if 0 = free-running */
+#define MTU_CRn_PRESCALE_MASK	0x0c
+#define MTU_CRn_PRESCALE_1		0x00
+#define MTU_CRn_PRESCALE_16		0x04
+#define MTU_CRn_PRESCALE_256		0x08
+#define MTU_CRn_32BITS		0x02
+#define MTU_CRn_ONESHOT		0x01	/* if 0 = wraps reloading from BGLR*/
+
+/* Other registers are usual amba/primecell registers, currently not used */
+#define MTU_ITCR	0xff0
+#define MTU_ITOP	0xff4
+
+#define MTU_PERIPH_ID0	0xfe0
+#define MTU_PERIPH_ID1	0xfe4
+#define MTU_PERIPH_ID2	0xfe8
+#define MTU_PERIPH_ID3	0xfeC
+
+#define MTU_PCELL0	0xff0
+#define MTU_PCELL1	0xff4
+#define MTU_PCELL2	0xff8
+#define MTU_PCELL3	0xffC
+
+#endif /* __ASM_ARCH_MTU_H */
+
diff --git a/arch/arm/mach-nomadik/include/mach/setup.h b/arch/arm/mach-nomadik/include/mach/setup.h
new file mode 100644
index 00000000000..a4e468cf63d
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/setup.h
@@ -0,0 +1,22 @@
+
+/*
+ * These symbols are needed for board-specific files to call their
+ * own cpu-specific files
+ */
+
+#ifndef __ASM_ARCH_SETUP_H
+#define __ASM_ARCH_SETUP_H
+
+#include <asm/mach/time.h>
+#include <linux/init.h>
+
+#ifdef CONFIG_NOMADIK_8815
+
+extern void cpu8815_map_io(void);
+extern void cpu8815_platform_init(void);
+extern void cpu8815_init_irq(void);
+extern struct sys_timer nomadik_timer;
+
+#endif /* NOMADIK_8815 */
+
+#endif /*  __ASM_ARCH_SETUP_H */
diff --git a/arch/arm/mach-nomadik/include/mach/system.h b/arch/arm/mach-nomadik/include/mach/system.h
new file mode 100644
index 00000000000..7119f688116
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/system.h
@@ -0,0 +1,45 @@
+/*
+ *  mach-nomadik/include/mach/system.h
+ *
+ *  Copyright (C) 2008 STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <linux/io.h>
+#include <mach/hardware.h>
+
+static inline void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+	void __iomem *src_rstsr = io_p2v(NOMADIK_SRC_BASE + 0x18);
+
+	/* FIXME: use egpio when implemented */
+
+	/* Write anything to Reset status register */
+	writel(1, src_rstsr);
+}
+
+#endif
diff --git a/arch/arm/mach-nomadik/include/mach/timex.h b/arch/arm/mach-nomadik/include/mach/timex.h
new file mode 100644
index 00000000000..318b8896ce9
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/timex.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#define CLOCK_TICK_RATE         2400000
+
+#endif
diff --git a/arch/arm/mach-nomadik/include/mach/uncompress.h b/arch/arm/mach-nomadik/include/mach/uncompress.h
new file mode 100644
index 00000000000..071003bc845
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/uncompress.h
@@ -0,0 +1,63 @@
+/*
+ *  Copyright (C) 2008 STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <mach/hardware.h>
+
+/* we need the constants in amba/serial.h, but it refers to amba_device */
+struct amba_device;
+#include <linux/amba/serial.h>
+
+#define NOMADIK_UART_DR		0x101FB000
+#define NOMADIK_UART_LCRH	0x101FB02c
+#define NOMADIK_UART_CR		0x101FB030
+#define NOMADIK_UART_FR		0x101FB018
+
+static void putc(const char c)
+{
+	/* Do nothing if the UART is not enabled. */
+	if (!(readb(NOMADIK_UART_CR) & UART01x_CR_UARTEN))
+		return;
+
+	if (c == '\n')
+		putc('\r');
+
+	while (readb(NOMADIK_UART_FR) & UART01x_FR_TXFF)
+		barrier();
+	writeb(c, NOMADIK_UART_DR);
+}
+
+static void flush(void)
+{
+	if (!(readb(NOMADIK_UART_CR) & UART01x_CR_UARTEN))
+		return;
+	while (readb(NOMADIK_UART_FR) & UART01x_FR_BUSY)
+		barrier();
+}
+
+static inline void arch_decomp_setup(void)
+{
+}
+
+#define arch_decomp_wdog() /* nothing to do here */
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-nomadik/include/mach/vmalloc.h b/arch/arm/mach-nomadik/include/mach/vmalloc.h
new file mode 100644
index 00000000000..be12e31ea52
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/vmalloc.h
@@ -0,0 +1,2 @@
+
+#define VMALLOC_END       0xe8000000
diff --git a/arch/arm/mach-nomadik/timer.c b/arch/arm/mach-nomadik/timer.c
new file mode 100644
index 00000000000..d1738e7061d
--- /dev/null
+++ b/arch/arm/mach-nomadik/timer.c
@@ -0,0 +1,164 @@
+/*
+ *  linux/arch/arm/mach-nomadik/timer.c
+ *
+ * Copyright (C) 2008 STMicroelectronics
+ * Copyright (C) 2009 Alessandro Rubini, somewhat based on at91sam926x
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/clockchips.h>
+#include <linux/jiffies.h>
+#include <asm/mach/time.h>
+#include <mach/mtu.h>
+
+#define TIMER_CTRL	0x80	/* No divisor */
+#define TIMER_PERIODIC	0x40
+#define TIMER_SZ32BIT	0x02
+
+/* Initial value for SRC control register: all timers use MXTAL/8 source */
+#define SRC_CR_INIT_MASK	0x00007fff
+#define SRC_CR_INIT_VAL		0x2aaa8000
+
+static u32	nmdk_count;		/* accumulated count */
+static u32	nmdk_cycle;		/* write-once */
+static __iomem void *mtu_base;
+
+/*
+ * clocksource: the MTU device is a decrementing counters, so we negate
+ * the value being read.
+ */
+static cycle_t nmdk_read_timer(struct clocksource *cs)
+{
+	u32 count = readl(mtu_base + MTU_VAL(0));
+	return nmdk_count + nmdk_cycle - count;
+
+}
+
+static struct clocksource nmdk_clksrc = {
+	.name		= "mtu_0",
+	.rating		= 120,
+	.read		= nmdk_read_timer,
+	.shift		= 20,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+/*
+ * Clockevent device: currently only periodic mode is supported
+ */
+static void nmdk_clkevt_mode(enum clock_event_mode mode,
+			     struct clock_event_device *dev)
+{
+	unsigned long flags;
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		/* enable interrupts -- and count current value? */
+		raw_local_irq_save(flags);
+		writel(readl(mtu_base + MTU_IMSC) | 1, mtu_base + MTU_IMSC);
+		raw_local_irq_restore(flags);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		BUG(); /* Not supported, yet */
+		/* FALLTHROUGH */
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_UNUSED:
+		/* disable irq */
+		raw_local_irq_save(flags);
+		writel(readl(mtu_base + MTU_IMSC) & ~1, mtu_base + MTU_IMSC);
+		raw_local_irq_restore(flags);
+		break;
+	case CLOCK_EVT_MODE_RESUME:
+		break;
+	}
+}
+
+static struct clock_event_device nmdk_clkevt = {
+	.name		= "mtu_0",
+	.features	= CLOCK_EVT_FEAT_PERIODIC,
+	.shift		= 32,
+	.rating		= 100,
+	.set_mode	= nmdk_clkevt_mode,
+};
+
+/*
+ * IRQ Handler for the timer 0 of the MTU block. The irq is not shared
+ * as we are the only users of mtu0 by now.
+ */
+static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id)
+{
+	/* ack: "interrupt clear register" */
+	writel( 1 << 0, mtu_base + MTU_ICR);
+
+	/* we can't count lost ticks, unfortunately */
+	nmdk_count += nmdk_cycle;
+	nmdk_clkevt.event_handler(&nmdk_clkevt);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ */
+static struct irqaction nmdk_timer_irq = {
+	.name		= "Nomadik Timer Tick",
+	.flags		= IRQF_DISABLED | IRQF_TIMER,
+	.handler	= nmdk_timer_interrupt,
+};
+
+static void nmdk_timer_reset(void)
+{
+	u32 cr;
+
+	writel(0, mtu_base + MTU_CR(0)); /* off */
+
+	/* configure load and background-load, and fire it up */
+	writel(nmdk_cycle, mtu_base + MTU_LR(0));
+	writel(nmdk_cycle, mtu_base + MTU_BGLR(0));
+	cr = MTU_CRn_PERIODIC | MTU_CRn_PRESCALE_1 | MTU_CRn_32BITS;
+	writel(cr, mtu_base + MTU_CR(0));
+	writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
+}
+
+static void __init nmdk_timer_init(void)
+{
+	u32 src_cr;
+	unsigned long rate;
+	int bits;
+
+	rate = CLOCK_TICK_RATE; /* 2.4MHz */
+	nmdk_cycle = (rate + HZ/2) / HZ;
+
+	/* Configure timer sources in "system reset controller" ctrl reg */
+	src_cr = readl(io_p2v(NOMADIK_SRC_BASE));
+	src_cr &= SRC_CR_INIT_MASK;
+	src_cr |= SRC_CR_INIT_VAL;
+	writel(src_cr, io_p2v(NOMADIK_SRC_BASE));
+
+	/* Save global pointer to mtu, used by functions above */
+	mtu_base = io_p2v(NOMADIK_MTU0_BASE);
+
+	/* Init the timer and register clocksource */
+	nmdk_timer_reset();
+
+	nmdk_clksrc.mult = clocksource_hz2mult(rate, nmdk_clksrc.shift);
+	bits =  8*sizeof(nmdk_count);
+	nmdk_clksrc.mask = CLOCKSOURCE_MASK(bits);
+
+	clocksource_register(&nmdk_clksrc);
+
+	/* Register irq and clockevents */
+	setup_irq(IRQ_MTU0, &nmdk_timer_irq);
+	nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift);
+	nmdk_clkevt.cpumask = cpumask_of(0);
+	clockevents_register_device(&nmdk_clkevt);
+}
+
+struct sys_timer nomadik_timer = {
+	.init		= nmdk_timer_init,
+};
-- 
cgit v1.2.3


From 2ec1d3594563e0283873e24bb5d100dffee5d568 Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Thu, 2 Jul 2009 15:29:12 +0100
Subject: [ARM] 5584/1: nomadik: add gpio driver and devices

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig                          |   3 +-
 arch/arm/mach-nomadik/Makefile            |   2 +-
 arch/arm/mach-nomadik/cpu-8815.c          |  75 ++++++
 arch/arm/mach-nomadik/gpio.c              | 396 ++++++++++++++++++++++++++++++
 arch/arm/mach-nomadik/include/mach/gpio.h |  71 ++++++
 5 files changed, 545 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/mach-nomadik/gpio.c
 create mode 100644 arch/arm/mach-nomadik/include/mach/gpio.h

(limited to 'arch/arm')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index d8cfd706501..b1093d8786b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -336,7 +336,8 @@ config ARCH_NOMADIK
 	select COMMON_CLKDEV
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
-
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for the Nomadik platform by ST-Ericsson
 
diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile
index fa97769fe70..3fc43543e6e 100644
--- a/arch/arm/mach-nomadik/Makefile
+++ b/arch/arm/mach-nomadik/Makefile
@@ -7,7 +7,7 @@
 
 # Object file lists.
 
-obj-y			+= clock.o timer.o
+obj-y			+= clock.o timer.o gpio.o
 
 # Cpu revision
 obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index dec42da6956..9917a9abdb5 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -19,12 +19,87 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/gpio.h>
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <asm/mach/map.h>
 #include <asm/hardware/vic.h>
 
+/* The 8815 has 4 GPIO blocks, let's register them immediately */
+static struct nmk_gpio_platform_data cpu8815_gpio[] = {
+	{
+		.name = "GPIO-0-31",
+		.first_gpio = 0,
+		.first_irq = NOMADIK_GPIO_TO_IRQ(0),
+		.parent_irq = IRQ_GPIO0,
+	}, {
+		.name = "GPIO-32-63",
+		.first_gpio = 32,
+		.first_irq = NOMADIK_GPIO_TO_IRQ(32),
+		.parent_irq = IRQ_GPIO1,
+	}, {
+		.name = "GPIO-64-95",
+		.first_gpio = 64,
+		.first_irq = NOMADIK_GPIO_TO_IRQ(64),
+		.parent_irq = IRQ_GPIO2,
+	}, {
+		.name = "GPIO-96-127", /* 124..127 not routed to pin */
+		.first_gpio = 96,
+		.first_irq = NOMADIK_GPIO_TO_IRQ(96),
+		.parent_irq = IRQ_GPIO3,
+	}
+};
+
+#define __MEM_4K_RESOURCE(x) \
+	.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+
+static struct amba_device cpu8815_amba_gpio[] = {
+	{
+		.dev = {
+			.init_name = "gpio0",
+			.platform_data = cpu8815_gpio + 0,
+		},
+		__MEM_4K_RESOURCE(NOMADIK_GPIO0_BASE),
+	}, {
+		.dev = {
+			.init_name = "gpio1",
+			.platform_data = cpu8815_gpio + 1,
+		},
+		__MEM_4K_RESOURCE(NOMADIK_GPIO1_BASE),
+	}, {
+		.dev = {
+			.init_name = "gpio2",
+			.platform_data = cpu8815_gpio + 2,
+		},
+		__MEM_4K_RESOURCE(NOMADIK_GPIO2_BASE),
+	}, {
+		.dev = {
+			.init_name = "gpio3",
+			.platform_data = cpu8815_gpio + 3,
+		},
+		__MEM_4K_RESOURCE(NOMADIK_GPIO3_BASE),
+	},
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+	cpu8815_amba_gpio + 0,
+	cpu8815_amba_gpio + 1,
+	cpu8815_amba_gpio + 2,
+	cpu8815_amba_gpio + 3,
+};
+
+static int __init cpu8815_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
+		amba_device_register(amba_devs[i], &iomem_resource);
+	return 0;
+}
+arch_initcall(cpu8815_init);
+
 /* All SoC devices live in the same area (see hardware.h) */
 static struct map_desc nomadik_io_desc[] __initdata = {
 	{
diff --git a/arch/arm/mach-nomadik/gpio.c b/arch/arm/mach-nomadik/gpio.c
new file mode 100644
index 00000000000..9a09b2791e0
--- /dev/null
+++ b/arch/arm/mach-nomadik/gpio.c
@@ -0,0 +1,396 @@
+/*
+ * Generic GPIO driver for logic cells found in the Nomadik SoC
+ *
+ * Copyright (C) 2008,2009 STMicroelectronics
+ * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
+ *   Rewritten based on work by Prafulla WADASKAR <prafulla.wadaskar@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+
+/*
+ * The GPIO module in the Nomadik family of Systems-on-Chip is an
+ * AMBA device, managing 32 pins and alternate functions.  The logic block
+ * is currently only used in the Nomadik.
+ *
+ * Symbols in this file are called "nmk_gpio" for "nomadik gpio"
+ */
+
+#define NMK_GPIO_PER_CHIP 32
+struct nmk_gpio_chip {
+	struct gpio_chip chip;
+	void __iomem *addr;
+	unsigned int parent_irq;
+	spinlock_t *lock;
+	/* Keep track of configured edges */
+	u32 edge_rising;
+	u32 edge_falling;
+};
+
+/* Mode functions */
+int nmk_gpio_set_mode(int gpio, int gpio_mode)
+{
+	struct nmk_gpio_chip *nmk_chip;
+	unsigned long flags;
+	u32 afunc, bfunc, bit;
+
+	nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
+	if (!nmk_chip)
+		return -EINVAL;
+
+	bit = 1 << (gpio - nmk_chip->chip.base);
+
+	spin_lock_irqsave(&nmk_chip->lock, flags);
+	afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & ~bit;
+	bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & ~bit;
+	if (gpio_mode & NMK_GPIO_ALT_A)
+		afunc |= bit;
+	if (gpio_mode & NMK_GPIO_ALT_B)
+		bfunc |= bit;
+	writel(afunc, nmk_chip->addr + NMK_GPIO_AFSLA);
+	writel(bfunc, nmk_chip->addr + NMK_GPIO_AFSLB);
+	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(nmk_gpio_set_mode);
+
+int nmk_gpio_get_mode(int gpio)
+{
+	struct nmk_gpio_chip *nmk_chip;
+	u32 afunc, bfunc, bit;
+
+	nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
+	if (!nmk_chip)
+		return -EINVAL;
+
+	bit = 1 << (gpio - nmk_chip->chip.base);
+
+	afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & bit;
+	bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & bit;
+
+	return (afunc ? NMK_GPIO_ALT_A : 0) | (bfunc ? NMK_GPIO_ALT_B : 0);
+}
+EXPORT_SYMBOL(nmk_gpio_get_mode);
+
+
+/* IRQ functions */
+static inline int nmk_gpio_get_bitmask(int gpio)
+{
+	return 1 << (gpio % 32);
+}
+
+static void nmk_gpio_irq_ack(unsigned int irq)
+{
+	int gpio;
+	struct nmk_gpio_chip *nmk_chip;
+
+	gpio = NOMADIK_IRQ_TO_GPIO(irq);
+	nmk_chip = get_irq_chip_data(irq);
+	if (!nmk_chip)
+		return;
+	writel(nmk_gpio_get_bitmask(gpio), nmk_chip->addr + NMK_GPIO_IC);
+}
+
+static void nmk_gpio_irq_mask(unsigned int irq)
+{
+	int gpio;
+	struct nmk_gpio_chip *nmk_chip;
+	unsigned long flags;
+	u32 bitmask, reg;
+
+	gpio = NOMADIK_IRQ_TO_GPIO(irq);
+	nmk_chip = get_irq_chip_data(irq);
+	bitmask = nmk_gpio_get_bitmask(gpio);
+	if (!nmk_chip)
+		return;
+
+	/* we must individually clear the two edges */
+	spin_lock_irqsave(&nmk_chip->lock, flags);
+	if (nmk_chip->edge_rising & bitmask) {
+		reg = readl(nmk_chip->addr + NMK_GPIO_RWIMSC);
+		reg &= ~bitmask;
+		writel(reg, nmk_chip->addr + NMK_GPIO_RWIMSC);
+	}
+	if (nmk_chip->edge_falling & bitmask) {
+		reg = readl(nmk_chip->addr + NMK_GPIO_FWIMSC);
+		reg &= ~bitmask;
+		writel(reg, nmk_chip->addr + NMK_GPIO_FWIMSC);
+	}
+	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+};
+
+static void nmk_gpio_irq_unmask(unsigned int irq)
+{
+	int gpio;
+	struct nmk_gpio_chip *nmk_chip;
+	unsigned long flags;
+	u32 bitmask, reg;
+
+	gpio = NOMADIK_IRQ_TO_GPIO(irq);
+	nmk_chip = get_irq_chip_data(irq);
+	bitmask = nmk_gpio_get_bitmask(gpio);
+	if (!nmk_chip)
+		return;
+
+	/* we must individually set the two edges */
+	spin_lock_irqsave(&nmk_chip->lock, flags);
+	if (nmk_chip->edge_rising & bitmask) {
+		reg = readl(nmk_chip->addr + NMK_GPIO_RWIMSC);
+		reg |= bitmask;
+		writel(reg, nmk_chip->addr + NMK_GPIO_RWIMSC);
+	}
+	if (nmk_chip->edge_falling & bitmask) {
+		reg = readl(nmk_chip->addr + NMK_GPIO_FWIMSC);
+		reg |= bitmask;
+		writel(reg, nmk_chip->addr + NMK_GPIO_FWIMSC);
+	}
+	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+}
+
+static int nmk_gpio_irq_set_type(unsigned int irq, unsigned int type)
+{
+	int gpio;
+	struct nmk_gpio_chip *nmk_chip;
+	unsigned long flags;
+	u32 bitmask;
+
+	gpio = NOMADIK_IRQ_TO_GPIO(irq);
+	nmk_chip = get_irq_chip_data(irq);
+	bitmask = nmk_gpio_get_bitmask(gpio);
+	if (!nmk_chip)
+		return -EINVAL;
+
+	if (type & IRQ_TYPE_LEVEL_HIGH)
+		return -EINVAL;
+	if (type & IRQ_TYPE_LEVEL_LOW)
+		return -EINVAL;
+
+	spin_lock_irqsave(&nmk_chip->lock, flags);
+
+	nmk_chip->edge_rising &= ~bitmask;
+	if (type & IRQ_TYPE_EDGE_RISING)
+		nmk_chip->edge_rising |= bitmask;
+	writel(nmk_chip->edge_rising, nmk_chip->addr + NMK_GPIO_RIMSC);
+
+	nmk_chip->edge_falling &= ~bitmask;
+	if (type & IRQ_TYPE_EDGE_FALLING)
+		nmk_chip->edge_falling |= bitmask;
+	writel(nmk_chip->edge_falling, nmk_chip->addr + NMK_GPIO_FIMSC);
+
+	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+
+	nmk_gpio_irq_unmask(irq);
+
+	return 0;
+}
+
+static struct irq_chip nmk_gpio_irq_chip = {
+	.name		= "Nomadik-GPIO",
+	.ack		= nmk_gpio_irq_ack,
+	.mask		= nmk_gpio_irq_mask,
+	.unmask		= nmk_gpio_irq_unmask,
+	.set_type	= nmk_gpio_irq_set_type,
+};
+
+static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	struct nmk_gpio_chip *nmk_chip;
+	struct irq_chip *host_chip;
+	unsigned int gpio_irq;
+	u32 pending;
+	unsigned int first_irq;
+
+	nmk_chip = get_irq_data(irq);
+	first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base);
+	while ( (pending = readl(nmk_chip->addr + NMK_GPIO_IS)) ) {
+		gpio_irq = first_irq + __ffs(pending);
+		generic_handle_irq(gpio_irq);
+	}
+	if (0) {/* don't ack parent irq, as ack == disable */
+		host_chip = get_irq_chip(irq);
+		host_chip->ack(irq);
+	}
+}
+
+static int nmk_gpio_init_irq(struct nmk_gpio_chip *nmk_chip)
+{
+	unsigned int first_irq;
+	int i;
+
+	first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base);
+	for (i = first_irq; i < first_irq + NMK_GPIO_PER_CHIP; i++) {
+		set_irq_chip(i, &nmk_gpio_irq_chip);
+		set_irq_handler(i, handle_edge_irq);
+		set_irq_flags(i, IRQF_VALID);
+		set_irq_chip_data(i, nmk_chip);
+	}
+	set_irq_chained_handler(nmk_chip->parent_irq, nmk_gpio_irq_handler);
+	set_irq_data(nmk_chip->parent_irq, nmk_chip);
+	return 0;
+}
+
+/* I/O Functions */
+static int nmk_gpio_make_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct nmk_gpio_chip *nmk_chip =
+		container_of(chip, struct nmk_gpio_chip, chip);
+
+	writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC);
+	return 0;
+}
+
+static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset,
+				int val)
+{
+	struct nmk_gpio_chip *nmk_chip =
+		container_of(chip, struct nmk_gpio_chip, chip);
+
+	writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS);
+	return 0;
+}
+
+static int nmk_gpio_get_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct nmk_gpio_chip *nmk_chip =
+		container_of(chip, struct nmk_gpio_chip, chip);
+	u32 bit = 1 << offset;
+
+	return (readl(nmk_chip->addr + NMK_GPIO_DAT) & bit) != 0;
+}
+
+static void nmk_gpio_set_output(struct gpio_chip *chip, unsigned offset,
+				int val)
+{
+	struct nmk_gpio_chip *nmk_chip =
+		container_of(chip, struct nmk_gpio_chip, chip);
+	u32 bit = 1 << offset;
+
+	if (val)
+		writel(bit, nmk_chip->addr + NMK_GPIO_DATS);
+	else
+		writel(bit, nmk_chip->addr + NMK_GPIO_DATC);
+}
+
+/* This structure is replicated for each GPIO block allocated at probe time */
+static struct gpio_chip nmk_gpio_template = {
+	.direction_input	= nmk_gpio_make_input,
+	.get			= nmk_gpio_get_input,
+	.direction_output	= nmk_gpio_make_output,
+	.set			= nmk_gpio_set_output,
+	.ngpio			= NMK_GPIO_PER_CHIP,
+	.can_sleep		= 0,
+};
+
+static int __init nmk_gpio_probe(struct amba_device *dev, struct amba_id *id)
+{
+	struct nmk_gpio_platform_data *pdata;
+	struct nmk_gpio_chip *nmk_chip;
+	struct gpio_chip *chip;
+	int ret;
+
+	pdata = dev->dev.platform_data;
+	ret = amba_request_regions(dev, pdata->name);
+	if (ret)
+		return ret;
+
+	nmk_chip = kzalloc(sizeof(*nmk_chip), GFP_KERNEL);
+	if (!nmk_chip) {
+		ret = -ENOMEM;
+		goto out_amba;
+	}
+	/*
+	 * The virt address in nmk_chip->addr is in the nomadik register space,
+	 * so we can simply convert the resource address, without remapping
+	 */
+	nmk_chip->addr = io_p2v(dev->res.start);
+	nmk_chip->chip = nmk_gpio_template;
+	nmk_chip->parent_irq = pdata->parent_irq;
+
+	chip = &nmk_chip->chip;
+	chip->base = pdata->first_gpio;
+	chip->label = pdata->name;
+	chip->dev = &dev->dev;
+	chip->owner = THIS_MODULE;
+
+	ret = gpiochip_add(&nmk_chip->chip);
+	if (ret)
+		goto out_free;
+
+	amba_set_drvdata(dev, nmk_chip);
+
+	nmk_gpio_init_irq(nmk_chip);
+
+	dev_info(&dev->dev, "Bits %i-%i at address %p\n",
+		 nmk_chip->chip.base, nmk_chip->chip.base+31, nmk_chip->addr);
+	return 0;
+
+ out_free:
+	kfree(nmk_chip);
+ out_amba:
+	amba_release_regions(dev);
+	dev_err(&dev->dev, "Failure %i for GPIO %i-%i\n", ret,
+		  pdata->first_gpio, pdata->first_gpio+31);
+	return ret;
+}
+
+static int nmk_gpio_remove(struct amba_device *dev)
+{
+	struct nmk_gpio_chip *nmk_chip;
+
+	nmk_chip = amba_get_drvdata(dev);
+	gpiochip_remove(&nmk_chip->chip);
+	kfree(nmk_chip);
+	amba_release_regions(dev);
+	return 0;
+}
+
+
+/* We have 0x1f080060 and 0x1f180060, accept both using the mask */
+static struct amba_id nmk_gpio_ids[] = {
+	{
+		.id	= 0x1f080060,
+		.mask	= 0xffefffff,
+	},
+	{0, 0},
+};
+
+static struct amba_driver nmk_gpio_driver = {
+	.drv = {
+		.owner = THIS_MODULE,
+		.name = "gpio",
+		},
+	.probe = nmk_gpio_probe,
+	.remove = nmk_gpio_remove,
+	.suspend = NULL, /* to be done */
+	.resume = NULL,
+	.id_table = nmk_gpio_ids,
+};
+
+static int __init nmk_gpio_init(void)
+{
+	return amba_driver_register(&nmk_gpio_driver);
+}
+
+arch_initcall(nmk_gpio_init);
+
+MODULE_AUTHOR("Prafulla WADASKAR and Alessandro Rubini");
+MODULE_DESCRIPTION("Nomadik GPIO Driver");
+MODULE_LICENSE("GPL");
+
+
diff --git a/arch/arm/mach-nomadik/include/mach/gpio.h b/arch/arm/mach-nomadik/include/mach/gpio.h
new file mode 100644
index 00000000000..61577c9f9a7
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/gpio.h
@@ -0,0 +1,71 @@
+/*
+ * Structures and registers for GPIO access in the Nomadik SoC
+ *
+ * Copyright (C) 2008 STMicroelectronics
+ *     Author: Prafulla WADASKAR <prafulla.wadaskar@st.com>
+ * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <asm-generic/gpio.h>
+
+/*
+ * These currently cause a function call to happen, they may be optimized
+ * if needed by adding cpu-specific defines to identify blocks
+ * (see mach-pxa/include/mach/gpio.h as an example using GPLR etc)
+ */
+#define gpio_get_value  __gpio_get_value
+#define gpio_set_value  __gpio_set_value
+#define gpio_cansleep   __gpio_cansleep
+#define gpio_to_irq     __gpio_to_irq
+
+/*
+ * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving
+ * the "gpio" namespace for generic and cross-machine functions
+ */
+
+/* Register in the logic block */
+#define NMK_GPIO_DAT	0x00
+#define NMK_GPIO_DATS	0x04
+#define NMK_GPIO_DATC	0x08
+#define NMK_GPIO_PDIS	0x0c
+#define NMK_GPIO_DIR	0x10
+#define NMK_GPIO_DIRS	0x14
+#define NMK_GPIO_DIRC	0x18
+#define NMK_GPIO_SLPC	0x1c
+#define NMK_GPIO_AFSLA	0x20
+#define NMK_GPIO_AFSLB	0x24
+
+#define NMK_GPIO_RIMSC	0x40
+#define NMK_GPIO_FIMSC	0x44
+#define NMK_GPIO_IS	0x48
+#define NMK_GPIO_IC	0x4c
+#define NMK_GPIO_RWIMSC	0x50
+#define NMK_GPIO_FWIMSC	0x54
+#define NMK_GPIO_WKS	0x58
+
+/* Alternate functions: function C is set in hw by setting both A and B */
+#define NMK_GPIO_ALT_GPIO	0
+#define NMK_GPIO_ALT_A	1
+#define NMK_GPIO_ALT_B	2
+#define NMK_GPIO_ALT_C	(NMK_GPIO_ALT_A | NMK_GPIO_ALT_B)
+
+extern int nmk_gpio_set_mode(int gpio, int gpio_mode);
+extern int nmk_gpio_get_mode(int gpio);
+
+/*
+ * Platform data to register a block: only the initial gpio/irq number.
+ */
+struct nmk_gpio_platform_data {
+	char *name;
+	int first_gpio;
+	int first_irq;
+	int parent_irq;
+};
+
+#endif /* __ASM_ARCH_GPIO_H */
-- 
cgit v1.2.3


From 63796b740b888b396eb0cc78917d755693cc224c Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Thu, 2 Jul 2009 15:29:22 +0100
Subject: [ARM] 5585/1: nomadik: add gpio-i2c devices

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-nomadik/Kconfig       |  7 ++++
 arch/arm/mach-nomadik/Makefile      |  3 ++
 arch/arm/mach-nomadik/i2c-8815nhk.c | 65 +++++++++++++++++++++++++++++++++++++
 3 files changed, 75 insertions(+)
 create mode 100644 arch/arm/mach-nomadik/i2c-8815nhk.c

(limited to 'arch/arm')

diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index abce2346106..2a02b49c40f 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -11,4 +11,11 @@ endmenu
 config NOMADIK_8815
 	bool
 
+
+config I2C_BITBANG_8815NHK
+	tristate "Driver for bit-bang busses found on the 8815 NHK"
+	depends on I2C && MACH_NOMADIK_8815NHK
+	select I2C_ALGOBIT
+	default y
+
 endif
diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile
index 3fc43543e6e..412040982a4 100644
--- a/arch/arm/mach-nomadik/Makefile
+++ b/arch/arm/mach-nomadik/Makefile
@@ -14,3 +14,6 @@ obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o
 
 # Specific board support
 obj-$(CONFIG_MACH_NOMADIK_8815NHK) += board-nhk8815.o
+
+# Nomadik extra devices
+obj-$(CONFIG_I2C_BITBANG_8815NHK) += i2c-8815nhk.o
diff --git a/arch/arm/mach-nomadik/i2c-8815nhk.c b/arch/arm/mach-nomadik/i2c-8815nhk.c
new file mode 100644
index 00000000000..abfe25a08d6
--- /dev/null
+++ b/arch/arm/mach-nomadik/i2c-8815nhk.c
@@ -0,0 +1,65 @@
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/i2c-gpio.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+/*
+ * There are two busses in the 8815NHK.
+ * They could, in theory, be driven by the hardware component, but we
+ * use bit-bang through GPIO by now, to keep things simple
+ */
+
+static struct i2c_gpio_platform_data nhk8815_i2c_data0 = {
+	/* keep defaults for timeouts; pins are push-pull bidirectional */
+	.scl_pin = 62,
+	.sda_pin = 63,
+};
+
+static struct i2c_gpio_platform_data nhk8815_i2c_data1 = {
+	/* keep defaults for timeouts; pins are push-pull bidirectional */
+	.scl_pin = 53,
+	.sda_pin = 54,
+};
+
+/* first bus: GPIO XX and YY */
+static struct platform_device nhk8815_i2c_dev0 = {
+	.name	= "i2c-gpio",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &nhk8815_i2c_data0,
+	},
+};
+/* second bus: GPIO XX and YY */
+static struct platform_device nhk8815_i2c_dev1 = {
+	.name	= "i2c-gpio",
+	.id	= 1,
+	.dev	= {
+		.platform_data = &nhk8815_i2c_data1,
+	},
+};
+
+static int __init nhk8815_i2c_init(void)
+{
+	nmk_gpio_set_mode(nhk8815_i2c_data0.scl_pin, NMK_GPIO_ALT_GPIO);
+	nmk_gpio_set_mode(nhk8815_i2c_data0.sda_pin, NMK_GPIO_ALT_GPIO);
+	platform_device_register(&nhk8815_i2c_dev0);
+
+	nmk_gpio_set_mode(nhk8815_i2c_data1.scl_pin, NMK_GPIO_ALT_GPIO);
+	nmk_gpio_set_mode(nhk8815_i2c_data1.sda_pin, NMK_GPIO_ALT_GPIO);
+	platform_device_register(&nhk8815_i2c_dev1);
+
+	return 0;
+}
+
+static void __exit nhk8815_i2c_exit(void)
+{
+	platform_device_unregister(&nhk8815_i2c_dev0);
+	platform_device_unregister(&nhk8815_i2c_dev1);
+	return;
+}
+
+module_init(nhk8815_i2c_init);
+module_exit(nhk8815_i2c_exit);
-- 
cgit v1.2.3


From 725b1f9d86822246e5a1237bf97d2783857d8a3a Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Thu, 2 Jul 2009 15:29:32 +0100
Subject: [ARM] 5586/1: nomadik board: added ethernet

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-nomadik/board-nhk8815.c | 38 ++++++++++++++++++++++++++++++++++-
 1 file changed, 37 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index eebca614d36..79bdea943eb 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -14,6 +14,8 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/amba/bus.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
@@ -45,8 +47,42 @@ static struct clk nhk8815_clk_48 = {
 	.rate = 48*1000*1000,
 };
 
+static struct resource nhk8815_eth_resources[] = {
+	{
+		.name = "smc91x-regs",
+		.start = 0x34000000 + 0x300,
+		.end = 0x34000000 + SZ_64K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = NOMADIK_GPIO_TO_IRQ(115),
+		.end = NOMADIK_GPIO_TO_IRQ(115),
+		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
+	}
+};
+
+static struct platform_device nhk8815_eth_device = {
+	.name = "smc91x",
+	.resource = nhk8815_eth_resources,
+	.num_resources = ARRAY_SIZE(nhk8815_eth_resources),
+};
+
+static int __init nhk8815_eth_init(void)
+{
+	int gpio_nr = 115; /* hardwired in the board */
+	int err;
+
+	err = gpio_request(gpio_nr, "eth_irq");
+	if (!err) err = nmk_gpio_set_mode(gpio_nr, NMK_GPIO_ALT_GPIO);
+	if (!err) err = gpio_direction_input(gpio_nr);
+	if (err)
+		pr_err("Error %i in %s\n", err, __func__);
+	return err;
+}
+device_initcall(nhk8815_eth_init);
+
 static struct platform_device *nhk8815_platform_devices[] __initdata = {
-	/* currently empty, will add keypad, touchscreen etc */
+	&nhk8815_eth_device,
+	/* will add more devices */
 };
 
 static void __init nhk8815_platform_init(void)
-- 
cgit v1.2.3


From 0b260fd4b0eb7c90f9258bfa6317ae553319b5da Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Thu, 2 Jul 2009 15:29:43 +0100
Subject: [ARM] 5587/1: nomadik: add l2cc

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-nomadik/cpu-8815.c | 8 +++++++-
 arch/arm/mm/Kconfig              | 2 +-
 2 files changed, 8 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index 9917a9abdb5..f93c5963419 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -27,6 +27,9 @@
 #include <asm/mach/map.h>
 #include <asm/hardware/vic.h>
 
+#include <asm/cacheflush.h>
+#include <asm/hardware/cache-l2x0.h>
+
 /* The 8815 has 4 GPIO blocks, let's register them immediately */
 static struct nmk_gpio_platform_data cpu8815_gpio[] = {
 	{
@@ -125,9 +128,12 @@ void __init cpu8815_init_irq(void)
 
 /*
  * This function is called from the board init ("init_machine").
- * Currently nothing is done as we can't register amba devs so early.
  */
  void __init cpu8815_platform_init(void)
 {
+#ifdef CONFIG_CACHE_L2X0
+	/* At full speed latency must be >=2, so 0x249 in low bits */
+	l2x0_init(io_p2v(NOMADIK_L2CC_BASE), 0x00730249, 0xfe000fff);
+#endif
 	 return;
 }
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 83c025e72ce..5fe595aeba6 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -758,7 +758,7 @@ config CACHE_FEROCEON_L2_WRITETHROUGH
 config CACHE_L2X0
 	bool "Enable the L2x0 outer cache controller"
 	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
-		   REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX
+		   REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || ARCH_NOMADIK
 	default y
 	select OUTER_CACHE
 	help
-- 
cgit v1.2.3


From c2b455474e4c6bc8bab6506e2a08dbd5ad50d74d Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Thu, 2 Jul 2009 15:29:53 +0100
Subject: [ARM] 5588/1: nomadik: add defconfig for nhk8815

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/configs/nhk8815_defconfig | 1316 ++++++++++++++++++++++++++++++++++++
 1 file changed, 1316 insertions(+)
 create mode 100644 arch/arm/configs/nhk8815_defconfig

(limited to 'arch/arm')

diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig
new file mode 100644
index 00000000000..9bb45b932f0
--- /dev/null
+++ b/arch/arm/configs/nhk8815_defconfig
@@ -0,0 +1,1316 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30
+# Tue Jun 23 22:57:16 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+CONFIG_ARCH_NOMADIK=y
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Nomadik boards
+#
+CONFIG_MACH_NOMADIK_8815NHK=y
+CONFIG_NOMADIK_8815=y
+CONFIG_I2C_BITBANG_8815NHK=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_L2X0=y
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_NET_IPIP=y
+CONFIG_NET_IPGRE=y
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+# CONFIG_IP_PIMSM_V1 is not set
+# CONFIG_IP_PIMSM_V2 is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+# CONFIG_BT_HCIUART_LL is not set
+CONFIG_BT_HCIVHCI=m
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_TESTS=m
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_NOMADIK=y
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=y
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+CONFIG_NETCONSOLE=m
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_PL061 is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_WACOM is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PL030 is not set
+# CONFIG_RTC_DRV_PL031 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
+# CONFIG_CUSE is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
-- 
cgit v1.2.3


From bbeddc43e673fb6882cc55efdc3c3002c14f5d08 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sun, 5 Jul 2009 22:43:01 +0100
Subject: [ARM] versatile: add PL061 gpiolib support

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig                            |  1 +
 arch/arm/mach-versatile/core.c              | 15 +++++++++++++--
 arch/arm/mach-versatile/include/mach/gpio.h |  6 ++++++
 arch/arm/mach-versatile/include/mach/irqs.h | 11 ++++++++++-
 arch/arm/mach-versatile/versatile_pb.c      | 15 +++++++++++++--
 5 files changed, 43 insertions(+), 5 deletions(-)
 create mode 100644 arch/arm/mach-versatile/include/mach/gpio.h

(limited to 'arch/arm')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aef63c8e3d2..e4971e4fa56 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -229,6 +229,7 @@ config ARCH_VERSATILE
 	select ICST307
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	help
 	  This enables support for ARM Ltd Versatile board.
 
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 69214fc8bd1..92273c95edf 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -26,6 +26,7 @@
 #include <linux/interrupt.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
+#include <linux/amba/pl061.h>
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 #include <linux/cnt32_to_63.h>
@@ -706,6 +707,16 @@ static struct clcd_board clcd_plat_data = {
 	.remove		= versatile_clcd_remove,
 };
 
+static struct pl061_platform_data gpio0_plat_data = {
+	.gpio_base	= 0,
+	.irq_base	= IRQ_GPIO0_START,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+	.gpio_base	= 8,
+	.irq_base	= IRQ_GPIO1_START,
+};
+
 #define AACI_IRQ	{ IRQ_AACI, NO_IRQ }
 #define AACI_DMA	{ 0x80, 0x81 }
 #define MMCI0_IRQ	{ IRQ_MMCI0A,IRQ_SIC_MMCI0B }
@@ -768,8 +779,8 @@ AMBA_DEVICE(clcd,  "dev:20",  CLCD,     &clcd_plat_data);
 AMBA_DEVICE(dmac,  "dev:30",  DMAC,     NULL);
 AMBA_DEVICE(sctl,  "dev:e0",  SCTL,     NULL);
 AMBA_DEVICE(wdog,  "dev:e1",  WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4",  GPIO0,    NULL);
-AMBA_DEVICE(gpio1, "dev:e5",  GPIO1,    NULL);
+AMBA_DEVICE(gpio0, "dev:e4",  GPIO0,    &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:e5",  GPIO1,    &gpio1_plat_data);
 AMBA_DEVICE(rtc,   "dev:e8",  RTC,      NULL);
 AMBA_DEVICE(sci0,  "dev:f0",  SCI,      NULL);
 AMBA_DEVICE(uart0, "dev:f1",  UART0,    NULL);
diff --git a/arch/arm/mach-versatile/include/mach/gpio.h b/arch/arm/mach-versatile/include/mach/gpio.h
new file mode 100644
index 00000000000..94ff27678a4
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/gpio.h
@@ -0,0 +1,6 @@
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#define gpio_to_irq	__gpio_to_irq
diff --git a/arch/arm/mach-versatile/include/mach/irqs.h b/arch/arm/mach-versatile/include/mach/irqs.h
index 9bfdb30e1f3..bf44c61bd1f 100644
--- a/arch/arm/mach-versatile/include/mach/irqs.h
+++ b/arch/arm/mach-versatile/include/mach/irqs.h
@@ -122,4 +122,13 @@
 #define IRQ_SIC_PCI3		(IRQ_SIC_START + SIC_INT_PCI3)
 #define IRQ_SIC_END		63
 
-#define NR_IRQS			64
+#define IRQ_GPIO0_START		(IRQ_SIC_END + 1)
+#define IRQ_GPIO0_END		(IRQ_GPIO0_START + 31)
+#define IRQ_GPIO1_START		(IRQ_GPIO0_END + 1)
+#define IRQ_GPIO1_END		(IRQ_GPIO1_START + 31)
+#define IRQ_GPIO2_START		(IRQ_GPIO1_END + 1)
+#define IRQ_GPIO2_END		(IRQ_GPIO2_START + 31)
+#define IRQ_GPIO3_START		(IRQ_GPIO2_END + 1)
+#define IRQ_GPIO3_END		(IRQ_GPIO3_START + 31)
+
+#define NR_IRQS			(IRQ_GPIO3_END + 1)
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index aa051c0884f..7419451fdf0 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -23,6 +23,7 @@
 #include <linux/device.h>
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -45,6 +46,16 @@ static struct mmc_platform_data mmc1_plat_data = {
 	.status		= mmc_status,
 };
 
+static struct pl061_platform_data gpio2_plat_data = {
+	.gpio_base	= 16,
+	.irq_base	= IRQ_GPIO2_START,
+};
+
+static struct pl061_platform_data gpio3_plat_data = {
+	.gpio_base	= 24,
+	.irq_base	= IRQ_GPIO3_START,
+};
+
 #define UART3_IRQ	{ IRQ_SIC_UART3, NO_IRQ }
 #define UART3_DMA	{ 0x86, 0x87 }
 #define SCI1_IRQ	{ IRQ_SIC_SCI3, NO_IRQ }
@@ -70,8 +81,8 @@ AMBA_DEVICE(sci1,  "fpga:0a", SCI1,     NULL);
 AMBA_DEVICE(mmc1,  "fpga:0b", MMCI1,    &mmc1_plat_data);
 
 /* DevChip Primecells */
-AMBA_DEVICE(gpio2, "dev:e6",  GPIO2,    NULL);
-AMBA_DEVICE(gpio3, "dev:e7",  GPIO3,    NULL);
+AMBA_DEVICE(gpio2, "dev:e6",  GPIO2,    &gpio2_plat_data);
+AMBA_DEVICE(gpio3, "dev:e7",  GPIO3,    &gpio3_plat_data);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&uart3_device,
-- 
cgit v1.2.3


From eb7fffa39a3f114832df54a3e373d7580d8fe757 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sun, 5 Jul 2009 22:41:31 +0100
Subject: [ARM] realview: add PL061 gpiolib support

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig                           |  1 +
 arch/arm/mach-realview/include/mach/gpio.h |  6 ++++++
 arch/arm/mach-realview/realview_eb.c       | 22 +++++++++++++++++++---
 arch/arm/mach-realview/realview_pb1176.c   | 22 +++++++++++++++++++---
 arch/arm/mach-realview/realview_pb11mp.c   | 22 +++++++++++++++++++---
 arch/arm/mach-realview/realview_pba8.c     | 22 +++++++++++++++++++---
 arch/arm/mach-realview/realview_pbx.c      | 22 +++++++++++++++++++---
 7 files changed, 102 insertions(+), 15 deletions(-)
 create mode 100644 arch/arm/mach-realview/include/mach/gpio.h

(limited to 'arch/arm')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e4971e4fa56..0dd29eb4a0e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -217,6 +217,7 @@ config ARCH_REALVIEW
 	select ICST307
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	help
 	  This enables support for ARM Ltd RealView boards.
 
diff --git a/arch/arm/mach-realview/include/mach/gpio.h b/arch/arm/mach-realview/include/mach/gpio.h
new file mode 100644
index 00000000000..94ff27678a4
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/gpio.h
@@ -0,0 +1,6 @@
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#define gpio_to_irq	__gpio_to_irq
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 8dfa44e08a9..abd13b44867 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -23,6 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -113,6 +114,21 @@ static void __init realview_eb_map_io(void)
 		iotable_init(realview_eb11mp_io_desc, ARRAY_SIZE(realview_eb11mp_io_desc));
 }
 
+static struct pl061_platform_data gpio0_plat_data = {
+	.gpio_base	= 0,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+	.gpio_base	= 8,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+	.gpio_base	= 16,
+	.irq_base	= -1,
+};
+
 /*
  * RealView EB AMBA devices
  */
@@ -189,9 +205,9 @@ AMBA_DEVICE(clcd,  "dev:20",  EB_CLCD,  &clcd_plat_data);
 AMBA_DEVICE(dmac,  "dev:30",  DMAC,     NULL);
 AMBA_DEVICE(sctl,  "dev:e0",  SCTL,     NULL);
 AMBA_DEVICE(wdog,  "dev:e1",  EB_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4",  EB_GPIO0, NULL);
-AMBA_DEVICE(gpio1, "dev:e5",  GPIO1,    NULL);
-AMBA_DEVICE(gpio2, "dev:e6",  GPIO2,    NULL);
+AMBA_DEVICE(gpio0, "dev:e4",  EB_GPIO0, &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:e5",  GPIO1,    &gpio1_plat_data);
+AMBA_DEVICE(gpio2, "dev:e6",  GPIO2,    &gpio2_plat_data);
 AMBA_DEVICE(rtc,   "dev:e8",  EB_RTC,   NULL);
 AMBA_DEVICE(sci0,  "dev:f0",  SCI,      NULL);
 AMBA_DEVICE(uart0, "dev:f1",  EB_UART0, NULL);
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 25efe71a67c..17fbb0e889b 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -23,6 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -107,6 +108,21 @@ static void __init realview_pb1176_map_io(void)
 	iotable_init(realview_pb1176_io_desc, ARRAY_SIZE(realview_pb1176_io_desc));
 }
 
+static struct pl061_platform_data gpio0_plat_data = {
+	.gpio_base	= 0,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+	.gpio_base	= 8,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+	.gpio_base	= 16,
+	.irq_base	= -1,
+};
+
 /*
  * RealView PB1176 AMBA devices
  */
@@ -164,9 +180,9 @@ AMBA_DEVICE(uart3,	"fpga:09",	PB1176_UART3,	NULL);
 AMBA_DEVICE(smc,	"dev:00",	PB1176_SMC,	NULL);
 AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
 AMBA_DEVICE(wdog,	"dev:e1",	PB1176_WATCHDOG,	NULL);
-AMBA_DEVICE(gpio0,	"dev:e4",	PB1176_GPIO0,	NULL);
-AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		NULL);
-AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		NULL);
+AMBA_DEVICE(gpio0,	"dev:e4",	PB1176_GPIO0,	&gpio0_plat_data);
+AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		&gpio1_plat_data);
+AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		&gpio2_plat_data);
 AMBA_DEVICE(rtc,	"dev:e8",	PB1176_RTC,	NULL);
 AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
 AMBA_DEVICE(uart0,	"dev:f1",	PB1176_UART0,	NULL);
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index dc4b1694390..fdd042b85f4 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -23,6 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -108,6 +109,21 @@ static void __init realview_pb11mp_map_io(void)
 	iotable_init(realview_pb11mp_io_desc, ARRAY_SIZE(realview_pb11mp_io_desc));
 }
 
+static struct pl061_platform_data gpio0_plat_data = {
+	.gpio_base	= 0,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+	.gpio_base	= 8,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+	.gpio_base	= 16,
+	.irq_base	= -1,
+};
+
 /*
  * RealView PB11MPCore AMBA devices
  */
@@ -166,9 +182,9 @@ AMBA_DEVICE(uart3,	"fpga:09",	PB11MP_UART3,	NULL);
 AMBA_DEVICE(smc,	"dev:00",	PB11MP_SMC,	NULL);
 AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
 AMBA_DEVICE(wdog,	"dev:e1",	PB11MP_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0,	"dev:e4",	PB11MP_GPIO0,	NULL);
-AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		NULL);
-AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		NULL);
+AMBA_DEVICE(gpio0,	"dev:e4",	PB11MP_GPIO0,	&gpio0_plat_data);
+AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		&gpio1_plat_data);
+AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		&gpio2_plat_data);
 AMBA_DEVICE(rtc,	"dev:e8",	PB11MP_RTC,	NULL);
 AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
 AMBA_DEVICE(uart0,	"dev:f1",	PB11MP_UART0,	NULL);
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index d6ac1eb8657..70bba9900d9 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -23,6 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
 #include <linux/io.h>
 
 #include <asm/irq.h>
@@ -98,6 +99,21 @@ static void __init realview_pba8_map_io(void)
 	iotable_init(realview_pba8_io_desc, ARRAY_SIZE(realview_pba8_io_desc));
 }
 
+static struct pl061_platform_data gpio0_plat_data = {
+	.gpio_base	= 0,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+	.gpio_base	= 8,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+	.gpio_base	= 16,
+	.irq_base	= -1,
+};
+
 /*
  * RealView PBA8Core AMBA devices
  */
@@ -156,9 +172,9 @@ AMBA_DEVICE(uart3,	"fpga:09",	PBA8_UART3,	NULL);
 AMBA_DEVICE(smc,	"dev:00",	PBA8_SMC,	NULL);
 AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
 AMBA_DEVICE(wdog,	"dev:e1",	PBA8_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0,	"dev:e4",	PBA8_GPIO0,	NULL);
-AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		NULL);
-AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		NULL);
+AMBA_DEVICE(gpio0,	"dev:e4",	PBA8_GPIO0,	&gpio0_plat_data);
+AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		&gpio1_plat_data);
+AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		&gpio2_plat_data);
 AMBA_DEVICE(rtc,	"dev:e8",	PBA8_RTC,	NULL);
 AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
 AMBA_DEVICE(uart0,	"dev:f1",	PBA8_UART0,	NULL);
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index ede2a57240a..ce6c5d25fbe 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -22,6 +22,7 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
 #include <linux/io.h>
 
 #include <asm/irq.h>
@@ -118,6 +119,21 @@ static void __init realview_pbx_map_io(void)
 		iotable_init(realview_local_io_desc, ARRAY_SIZE(realview_local_io_desc));
 }
 
+static struct pl061_platform_data gpio0_plat_data = {
+	.gpio_base	= 0,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+	.gpio_base	= 8,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+	.gpio_base	= 16,
+	.irq_base	= -1,
+};
+
 /*
  * RealView PBXCore AMBA devices
  */
@@ -176,9 +192,9 @@ AMBA_DEVICE(uart3,	"fpga:09",	PBX_UART3,	NULL);
 AMBA_DEVICE(smc,	"dev:00",	PBX_SMC,	NULL);
 AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
 AMBA_DEVICE(wdog,	"dev:e1",	PBX_WATCHDOG, 	NULL);
-AMBA_DEVICE(gpio0,	"dev:e4",	PBX_GPIO0,	NULL);
-AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		NULL);
-AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		NULL);
+AMBA_DEVICE(gpio0,	"dev:e4",	PBX_GPIO0,	&gpio0_plat_data);
+AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		&gpio1_plat_data);
+AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		&gpio2_plat_data);
 AMBA_DEVICE(rtc,	"dev:e8",	PBX_RTC,	NULL);
 AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
 AMBA_DEVICE(uart0,	"dev:f1",	PBX_UART0,	NULL);
-- 
cgit v1.2.3


From 7fb2bbf4d9e7e62057184f1e061566459eef6c79 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Thu, 9 Jul 2009 15:15:12 +0100
Subject: MMC: MMCI: allow GPIOs to be passed

Add and initialize the gpio_wp and gpio_cd members.  We need to
ensure that all users are covered, because GPIO 0 may be valid.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
---
 arch/arm/include/asm/mach/mmc.h          | 2 ++
 arch/arm/mach-integrator/integrator_cp.c | 2 ++
 arch/arm/mach-realview/core.c            | 4 ++++
 arch/arm/mach-u300/mmc.c                 | 2 ++
 arch/arm/mach-versatile/core.c           | 2 ++
 arch/arm/mach-versatile/versatile_pb.c   | 2 ++
 6 files changed, 14 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/mach/mmc.h b/arch/arm/include/asm/mach/mmc.h
index 4da332b0314..b490ecc79de 100644
--- a/arch/arm/include/asm/mach/mmc.h
+++ b/arch/arm/include/asm/mach/mmc.h
@@ -10,6 +10,8 @@ struct mmc_platform_data {
 	unsigned int ocr_mask;			/* available voltages */
 	u32 (*translate_vdd)(struct device *, unsigned int);
 	unsigned int (*status)(struct device *);
+	int	gpio_wp;
+	int	gpio_cd;
 };
 
 #endif
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 4ac04055c2e..69956cdae3c 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -403,6 +403,8 @@ static unsigned int mmc_status(struct device *dev)
 static struct mmc_platform_data mmc_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= mmc_status,
+	.gpio_wp	= -1,
+	.gpio_cd	= -1,
 };
 
 static struct amba_device mmc_device = {
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 9ea9c05093c..17a07e6acfa 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -238,11 +238,15 @@ static unsigned int realview_mmc_status(struct device *dev)
 struct mmc_platform_data realview_mmc0_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= realview_mmc_status,
+	.gpio_wp	= -1,
+	.gpio_cd	= -1,
 };
 
 struct mmc_platform_data realview_mmc1_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= realview_mmc_status,
+	.gpio_wp	= -1,
+	.gpio_cd	= -1,
 };
 
 /*
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
index 3138d3955c9..585cc013639 100644
--- a/arch/arm/mach-u300/mmc.c
+++ b/arch/arm/mach-u300/mmc.c
@@ -156,6 +156,8 @@ int __devinit mmc_init(struct amba_device *adev)
 	mmci_card->mmc0_plat_data.ocr_mask = MMC_VDD_28_29;
 	mmci_card->mmc0_plat_data.translate_vdd = mmc_translate_vdd;
 	mmci_card->mmc0_plat_data.status = mmc_status;
+	mmci_card->mmc0_plat_data.gpio_wp = -1;
+	mmci_card->mmc0_plat_data.gpio_cd = -1;
 
 	mmcsd_device->platform_data = (void *) &mmci_card->mmc0_plat_data;
 
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 92273c95edf..afc0f87f3fa 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -373,6 +373,8 @@ unsigned int mmc_status(struct device *dev)
 static struct mmc_platform_data mmc0_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= mmc_status,
+	.gpio_wp	= -1,
+	.gpio_cd	= -1,
 };
 
 /*
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index 7419451fdf0..9af8d8154df 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -44,6 +44,8 @@
 static struct mmc_platform_data mmc1_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= mmc_status,
+	.gpio_wp	= -1,
+	.gpio_cd	= -1,
 };
 
 static struct pl061_platform_data gpio2_plat_data = {
-- 
cgit v1.2.3


From 02239f0a4264608686cc0015d906c7b2dead89df Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Wed, 8 Jul 2009 02:00:49 +0100
Subject: [ARM] 5577/2: ep93xx: syscon locked register functions

Add core functions to handle writes to the ep93xx software locked
registers.

There are a number of registers in the EP93xx System Controller
that require a write to the software lock register before they
can be updated. This patch adds a number of exported functions
to the ep93xx core that handle this access.

The software locked clock divider registers, VidClkDiv, MIRClkDiv,
I2SClkDiv and KeyTchClkDiv would typically involve writing a
specific value to the register. To support this the
ep93xx_syscon_swlocked_write() function is provided.

For the DeviceCfg register it's more typical to only need to
set or clear a single bit. A generic ep93xx_devcfg_set_clear()
function is provided to handle both operations. Two inline
functions, ep93xx_devcfg_set_bits() and ep93xx_devcfg_clear_bits()
are also provided to improve code readability.

In addition, the remaining bits in the System Controller Device
Config Register have been documented and the previously defined
names shortened.

All code paths that use this functionality have been updated
except for arch/arm/kernel/crunch.c. That code is in a context
switch path, which is not reentrant, so it is safe against itself.

Cc: Lennert Buytenhek <buytenh@wantstofly.org>
Cc: Matthias Kaehlcke <matthias@kaehlcke.net>
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/crunch.c                        | 13 +++++--
 arch/arm/mach-ep93xx/clock.c                    | 24 +++++++-----
 arch/arm/mach-ep93xx/core.c                     | 52 ++++++++++++++++++++-----
 arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h | 36 ++++++++++++++---
 arch/arm/mach-ep93xx/include/mach/platform.h    | 16 ++++++++
 arch/arm/mach-ep93xx/include/mach/system.h      | 12 +++---
 6 files changed, 118 insertions(+), 35 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/crunch.c b/arch/arm/kernel/crunch.c
index 99995c2b231..769abe15cf9 100644
--- a/arch/arm/kernel/crunch.c
+++ b/arch/arm/kernel/crunch.c
@@ -31,7 +31,7 @@ void crunch_task_release(struct thread_info *thread)
 
 static int crunch_enabled(u32 devcfg)
 {
-	return !!(devcfg & EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE);
+	return !!(devcfg & EP93XX_SYSCON_DEVCFG_CPENA);
 }
 
 static int crunch_do(struct notifier_block *self, unsigned long cmd, void *t)
@@ -56,11 +56,16 @@ static int crunch_do(struct notifier_block *self, unsigned long cmd, void *t)
 		break;
 
 	case THREAD_NOTIFY_SWITCH:
-		devcfg = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
+		devcfg = __raw_readl(EP93XX_SYSCON_DEVCFG);
 		if (crunch_enabled(devcfg) || crunch_owner == crunch_state) {
-			devcfg ^= EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE;
+			/*
+			 * We don't use ep93xx_syscon_swlocked_write() here
+			 * because we are on the context switch path and
+			 * preemption is already disabled.
+			 */
+			devcfg ^= EP93XX_SYSCON_DEVCFG_CPENA;
 			__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-			__raw_writel(devcfg, EP93XX_SYSCON_DEVICE_CONFIG);
+			__raw_writel(devcfg, EP93XX_SYSCON_DEVCFG);
 		}
 		break;
 	}
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 6c4c1633ed1..c7642acfd02 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -50,20 +50,20 @@ static unsigned long get_uart_rate(struct clk *clk);
 
 static struct clk clk_uart1 = {
 	.sw_locked	= 1,
-	.enable_reg	= EP93XX_SYSCON_DEVICE_CONFIG,
-	.enable_mask	= EP93XX_SYSCON_DEVICE_CONFIG_U1EN,
+	.enable_reg	= EP93XX_SYSCON_DEVCFG,
+	.enable_mask	= EP93XX_SYSCON_DEVCFG_U1EN,
 	.get_rate	= get_uart_rate,
 };
 static struct clk clk_uart2 = {
 	.sw_locked	= 1,
-	.enable_reg	= EP93XX_SYSCON_DEVICE_CONFIG,
-	.enable_mask	= EP93XX_SYSCON_DEVICE_CONFIG_U2EN,
+	.enable_reg	= EP93XX_SYSCON_DEVCFG,
+	.enable_mask	= EP93XX_SYSCON_DEVCFG_U2EN,
 	.get_rate	= get_uart_rate,
 };
 static struct clk clk_uart3 = {
 	.sw_locked	= 1,
-	.enable_reg	= EP93XX_SYSCON_DEVICE_CONFIG,
-	.enable_mask	= EP93XX_SYSCON_DEVICE_CONFIG_U3EN,
+	.enable_reg	= EP93XX_SYSCON_DEVCFG,
+	.enable_mask	= EP93XX_SYSCON_DEVCFG_U3EN,
 	.get_rate	= get_uart_rate,
 };
 static struct clk clk_pll1;
@@ -160,9 +160,11 @@ int clk_enable(struct clk *clk)
 		u32 value;
 
 		value = __raw_readl(clk->enable_reg);
+		value |= clk->enable_mask;
 		if (clk->sw_locked)
-			__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-		__raw_writel(value | clk->enable_mask, clk->enable_reg);
+			ep93xx_syscon_swlocked_write(value, clk->enable_reg);
+		else
+			__raw_writel(value, clk->enable_reg);
 	}
 
 	return 0;
@@ -175,9 +177,11 @@ void clk_disable(struct clk *clk)
 		u32 value;
 
 		value = __raw_readl(clk->enable_reg);
+		value &= ~clk->enable_mask;
 		if (clk->sw_locked)
-			__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-		__raw_writel(value & ~clk->enable_mask, clk->enable_reg);
+			ep93xx_syscon_swlocked_write(value, clk->enable_reg);
+		else
+			__raw_writel(value, clk->enable_reg);
 	}
 }
 EXPORT_SYMBOL(clk_disable);
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 204dc5cbd0b..9399d3af990 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -384,6 +384,47 @@ void __init ep93xx_init_irq(void)
 }
 
 
+/*************************************************************************
+ * EP93xx System Controller Software Locked register handling
+ *************************************************************************/
+
+/*
+ * syscon_swlock prevents anything else from writing to the syscon
+ * block while a software locked register is being written.
+ */
+static DEFINE_SPINLOCK(syscon_swlock);
+
+void ep93xx_syscon_swlocked_write(unsigned int val, unsigned int reg)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&syscon_swlock, flags);
+
+	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
+	__raw_writel(val, reg);
+
+	spin_unlock_irqrestore(&syscon_swlock, flags);
+}
+EXPORT_SYMBOL(ep93xx_syscon_swlocked_write);
+
+void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits)
+{
+	unsigned long flags;
+	unsigned int val;
+
+	spin_lock_irqsave(&syscon_swlock, flags);
+
+	val = __raw_readl(EP93XX_SYSCON_DEVCFG);
+	val |= set_bits;
+	val &= ~clear_bits;
+	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
+	__raw_writel(val, EP93XX_SYSCON_DEVCFG);
+
+	spin_unlock_irqrestore(&syscon_swlock, flags);
+}
+EXPORT_SYMBOL(ep93xx_devcfg_set_clear);
+
+
 /*************************************************************************
  * EP93xx peripheral handling
  *************************************************************************/
@@ -550,15 +591,8 @@ extern void ep93xx_gpio_init(void);
 
 void __init ep93xx_init_devices(void)
 {
-	unsigned int v;
-
-	/*
-	 * Disallow access to MaverickCrunch initially.
-	 */
-	v = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
-	v &= ~EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE;
-	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-	__raw_writel(v, EP93XX_SYSCON_DEVICE_CONFIG);
+	/* Disallow access to MaverickCrunch initially */
+	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA);
 
 	ep93xx_gpio_init();
 
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index 49b256b3ddf..087d22b8f35 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -175,11 +175,37 @@
 #define EP93XX_SYSCON_STANDBY		EP93XX_SYSCON_REG(0x0c)
 #define EP93XX_SYSCON_CLOCK_SET1	EP93XX_SYSCON_REG(0x20)
 #define EP93XX_SYSCON_CLOCK_SET2	EP93XX_SYSCON_REG(0x24)
-#define EP93XX_SYSCON_DEVICE_CONFIG	EP93XX_SYSCON_REG(0x80)
-#define EP93XX_SYSCON_DEVICE_CONFIG_U3EN		(1<<24)
-#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE	(1<<23)
-#define EP93XX_SYSCON_DEVICE_CONFIG_U2EN		(1<<20)
-#define EP93XX_SYSCON_DEVICE_CONFIG_U1EN		(1<<18)
+#define EP93XX_SYSCON_DEVCFG		EP93XX_SYSCON_REG(0x80)
+#define EP93XX_SYSCON_DEVCFG_SWRST	(1<<31)
+#define EP93XX_SYSCON_DEVCFG_D1ONG	(1<<30)
+#define EP93XX_SYSCON_DEVCFG_D0ONG	(1<<29)
+#define EP93XX_SYSCON_DEVCFG_IONU2	(1<<28)
+#define EP93XX_SYSCON_DEVCFG_GONK	(1<<27)
+#define EP93XX_SYSCON_DEVCFG_TONG	(1<<26)
+#define EP93XX_SYSCON_DEVCFG_MONG	(1<<25)
+#define EP93XX_SYSCON_DEVCFG_U3EN	(1<<24)
+#define EP93XX_SYSCON_DEVCFG_CPENA	(1<<23)
+#define EP93XX_SYSCON_DEVCFG_A2ONG	(1<<22)
+#define EP93XX_SYSCON_DEVCFG_A1ONG	(1<<21)
+#define EP93XX_SYSCON_DEVCFG_U2EN	(1<<20)
+#define EP93XX_SYSCON_DEVCFG_EXVC	(1<<19)
+#define EP93XX_SYSCON_DEVCFG_U1EN	(1<<18)
+#define EP93XX_SYSCON_DEVCFG_TIN	(1<<17)
+#define EP93XX_SYSCON_DEVCFG_HC3IN	(1<<15)
+#define EP93XX_SYSCON_DEVCFG_HC3EN	(1<<14)
+#define EP93XX_SYSCON_DEVCFG_HC1IN	(1<<13)
+#define EP93XX_SYSCON_DEVCFG_HC1EN	(1<<12)
+#define EP93XX_SYSCON_DEVCFG_HONIDE	(1<<11)
+#define EP93XX_SYSCON_DEVCFG_GONIDE	(1<<10)
+#define EP93XX_SYSCON_DEVCFG_PONG	(1<<9)
+#define EP93XX_SYSCON_DEVCFG_EONIDE	(1<<8)
+#define EP93XX_SYSCON_DEVCFG_I2SONSSP	(1<<7)
+#define EP93XX_SYSCON_DEVCFG_I2SONAC97	(1<<6)
+#define EP93XX_SYSCON_DEVCFG_RASONP3	(1<<4)
+#define EP93XX_SYSCON_DEVCFG_RAS	(1<<3)
+#define EP93XX_SYSCON_DEVCFG_ADCPD	(1<<2)
+#define EP93XX_SYSCON_DEVCFG_KEYS	(1<<1)
+#define EP93XX_SYSCON_DEVCFG_SHENA	(1<<0)
 #define EP93XX_SYSCON_SWLOCK		EP93XX_SYSCON_REG(0xc0)
 
 #define EP93XX_WATCHDOG_BASE		EP93XX_APB_IOMEM(0x00140000)
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 05f0f4f2f3c..fb5e59a3ea0 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -15,8 +15,24 @@ struct ep93xx_eth_data
 void ep93xx_map_io(void);
 void ep93xx_init_irq(void);
 void ep93xx_init_time(unsigned long);
+
+/* EP93xx System Controller software locked register write */
+void ep93xx_syscon_swlocked_write(unsigned int val, unsigned int reg);
+void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits);
+
+static inline void ep93xx_devcfg_set_bits(unsigned int bits)
+{
+	ep93xx_devcfg_set_clear(bits, 0x00);
+}
+
+static inline void ep93xx_devcfg_clear_bits(unsigned int bits)
+{
+	ep93xx_devcfg_set_clear(0x00, bits);
+}
+
 void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
 void ep93xx_register_i2c(struct i2c_board_info *devices, int num);
+
 void ep93xx_init_devices(void);
 extern struct sys_timer ep93xx_timer;
 
diff --git a/arch/arm/mach-ep93xx/include/mach/system.h b/arch/arm/mach-ep93xx/include/mach/system.h
index ed8f35e4f06..6d661fe9d66 100644
--- a/arch/arm/mach-ep93xx/include/mach/system.h
+++ b/arch/arm/mach-ep93xx/include/mach/system.h
@@ -11,15 +11,13 @@ static inline void arch_idle(void)
 
 static inline void arch_reset(char mode, const char *cmd)
 {
-	u32 devicecfg;
-
 	local_irq_disable();
 
-	devicecfg = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
-	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-	__raw_writel(devicecfg | 0x80000000, EP93XX_SYSCON_DEVICE_CONFIG);
-	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-	__raw_writel(devicecfg & ~0x80000000, EP93XX_SYSCON_DEVICE_CONFIG);
+	/*
+	 * Set then clear the SWRST bit to initiate a software reset
+	 */
+	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_SWRST);
+	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_SWRST);
 
 	while (1)
 		;
-- 
cgit v1.2.3


From 701fac823e24676ea42451c6597f96d81d9b6aba Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Tue, 30 Jun 2009 23:06:43 +0100
Subject: [ARM] 5578/1: ep93xx: add ep93xx-keypad clock

Add clkdev support for the ep93xx_keypad driver.

A matrix keypad driver for the ep93xx just got merged via the
input subsystem group.  For this driver to work the keypad clock
needs to be added to the ep93xx clkdev support.  In order to
accomplish this the following changes are implemented:

  1) Move the EP93XX_EXT_*_RATE defines to mach/include/hardware.h.
  2) Add EP93XX_KEYTCHCLK_DIV{4/16} for the keypad driver.
  3) Add support for programmable clocks (set_rate() callback).
  4) Add clk_keypad for the keypad driver.
  5) tab indent the clk_lookup table for easier reading.
  6) Add the set_rate() callback to program the keypad clock.
     This callback is generalized since the ADC clock (touchscreen)
     can use the same callback.
  7) Use the ep93xx_syscon_swlocked_write() core function for updating
     the software locked register.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/clock.c                 | 101 ++++++++++++++++++---------
 arch/arm/mach-ep93xx/include/mach/hardware.h |  14 ++++
 2 files changed, 82 insertions(+), 33 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index c7642acfd02..207e2769941 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -22,18 +22,6 @@
 #include <mach/hardware.h>
 
 
-/*
- * The EP93xx has two external crystal oscillators.  To generate the
- * required high-frequency clocks, the processor uses two phase-locked-
- * loops (PLLs) to multiply the incoming external clock signal to much
- * higher frequencies that are then divided down by programmable dividers
- * to produce the needed clocks.  The PLLs operate independently of one
- * another.
- */
-#define EP93XX_EXT_CLK_RATE	14745600
-#define EP93XX_EXT_RTC_RATE	32768
-
-
 struct clk {
 	unsigned long	rate;
 	int		users;
@@ -42,11 +30,14 @@ struct clk {
 	u32		enable_mask;
 
 	unsigned long	(*get_rate)(struct clk *clk);
+	int		(*set_rate)(struct clk *clk, unsigned long rate);
 };
 
 
 static unsigned long get_uart_rate(struct clk *clk);
 
+static int set_keytchclk_rate(struct clk *clk, unsigned long rate);
+
 
 static struct clk clk_uart1 = {
 	.sw_locked	= 1,
@@ -75,6 +66,12 @@ static struct clk clk_usb_host = {
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_USH_EN,
 };
+static struct clk clk_keypad = {
+	.sw_locked	= 1,
+	.enable_reg	= EP93XX_SYSCON_KEYTCHCLKDIV,
+	.enable_mask	= EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
+	.set_rate	= set_keytchclk_rate,
+};
 
 /* DMA Clocks */
 static struct clk clk_m2p0 = {
@@ -130,27 +127,28 @@ static struct clk clk_m2m1 = {
 	{ .dev_id = dev, .con_id = con, .clk = ck }
 
 static struct clk_lookup clocks[] = {
-	INIT_CK("apb:uart1", NULL, &clk_uart1),
-	INIT_CK("apb:uart2", NULL, &clk_uart2),
-	INIT_CK("apb:uart3", NULL, &clk_uart3),
-	INIT_CK(NULL, "pll1", &clk_pll1),
-	INIT_CK(NULL, "fclk", &clk_f),
-	INIT_CK(NULL, "hclk", &clk_h),
-	INIT_CK(NULL, "pclk", &clk_p),
-	INIT_CK(NULL, "pll2", &clk_pll2),
-	INIT_CK("ep93xx-ohci", NULL, &clk_usb_host),
-	INIT_CK(NULL, "m2p0", &clk_m2p0),
-	INIT_CK(NULL, "m2p1", &clk_m2p1),
-	INIT_CK(NULL, "m2p2", &clk_m2p2),
-	INIT_CK(NULL, "m2p3", &clk_m2p3),
-	INIT_CK(NULL, "m2p4", &clk_m2p4),
-	INIT_CK(NULL, "m2p5", &clk_m2p5),
-	INIT_CK(NULL, "m2p6", &clk_m2p6),
-	INIT_CK(NULL, "m2p7", &clk_m2p7),
-	INIT_CK(NULL, "m2p8", &clk_m2p8),
-	INIT_CK(NULL, "m2p9", &clk_m2p9),
-	INIT_CK(NULL, "m2m0", &clk_m2m0),
-	INIT_CK(NULL, "m2m1", &clk_m2m1),
+	INIT_CK("apb:uart1",		NULL,		&clk_uart1),
+	INIT_CK("apb:uart2",		NULL,		&clk_uart2),
+	INIT_CK("apb:uart3",		NULL,		&clk_uart3),
+	INIT_CK(NULL,			"pll1",		&clk_pll1),
+	INIT_CK(NULL,			"fclk",		&clk_f),
+	INIT_CK(NULL,			"hclk",		&clk_h),
+	INIT_CK(NULL,			"pclk",		&clk_p),
+	INIT_CK(NULL,			"pll2",		&clk_pll2),
+	INIT_CK("ep93xx-ohci",		NULL,		&clk_usb_host),
+	INIT_CK("ep93xx-keypad",	NULL,		&clk_keypad),
+	INIT_CK(NULL,			"m2p0",		&clk_m2p0),
+	INIT_CK(NULL,			"m2p1",		&clk_m2p1),
+	INIT_CK(NULL,			"m2p2",		&clk_m2p2),
+	INIT_CK(NULL,			"m2p3",		&clk_m2p3),
+	INIT_CK(NULL,			"m2p4",		&clk_m2p4),
+	INIT_CK(NULL,			"m2p5",		&clk_m2p5),
+	INIT_CK(NULL,			"m2p6",		&clk_m2p6),
+	INIT_CK(NULL,			"m2p7",		&clk_m2p7),
+	INIT_CK(NULL,			"m2p8",		&clk_m2p8),
+	INIT_CK(NULL,			"m2p9",		&clk_m2p9),
+	INIT_CK(NULL,			"m2m0",		&clk_m2m0),
+	INIT_CK(NULL,			"m2m1",		&clk_m2m1),
 };
 
 
@@ -206,6 +204,43 @@ unsigned long clk_get_rate(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_rate);
 
+static int set_keytchclk_rate(struct clk *clk, unsigned long rate)
+{
+	u32 val;
+	u32 div_bit;
+
+	val = __raw_readl(clk->enable_reg);
+
+	/*
+	 * The Key Matrix and ADC clocks are configured using the same
+	 * System Controller register.  The clock used will be either
+	 * 1/4 or 1/16 the external clock rate depending on the
+	 * EP93XX_SYSCON_KEYTCHCLKDIV_KDIV/EP93XX_SYSCON_KEYTCHCLKDIV_ADIV
+	 * bit being set or cleared.
+	 */
+	div_bit = clk->enable_mask >> 15;
+
+	if (rate == EP93XX_KEYTCHCLK_DIV4)
+		val |= div_bit;
+	else if (rate == EP93XX_KEYTCHCLK_DIV16)
+		val &= ~div_bit;
+	else
+		return -EINVAL;
+
+	ep93xx_syscon_swlocked_write(val, clk->enable_reg);
+	clk->rate = rate;
+	return 0;
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	if (clk->set_rate)
+		return clk->set_rate(clk, rate);
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
 
 static char fclk_divisors[] = { 1, 2, 4, 8, 16, 1, 1, 1 };
 static char hclk_divisors[] = { 1, 2, 4, 5, 6, 8, 16, 32 };
diff --git a/arch/arm/mach-ep93xx/include/mach/hardware.h b/arch/arm/mach-ep93xx/include/mach/hardware.h
index 2866297310b..587c07bdec5 100644
--- a/arch/arm/mach-ep93xx/include/mach/hardware.h
+++ b/arch/arm/mach-ep93xx/include/mach/hardware.h
@@ -12,4 +12,18 @@
 
 #include "ts72xx.h"
 
+/*
+ * The EP93xx has two external crystal oscillators.  To generate the
+ * required high-frequency clocks, the processor uses two phase-locked-
+ * loops (PLLs) to multiply the incoming external clock signal to much
+ * higher frequencies that are then divided down by programmable dividers
+ * to produce the needed clocks.  The PLLs operate independently of one
+ * another.
+ */
+#define EP93XX_EXT_CLK_RATE	14745600
+#define EP93XX_EXT_RTC_RATE	32768
+
+#define EP93XX_KEYTCHCLK_DIV4	(EP93XX_EXT_CLK_RATE / 4)
+#define EP93XX_KEYTCHCLK_DIV16	(EP93XX_EXT_CLK_RATE / 16)
+
 #endif
-- 
cgit v1.2.3


From 583ddafe1787528d08b0026bb3273490a499b730 Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Mon, 6 Jul 2009 17:39:50 +0100
Subject: [ARM] 5592/1: ep93xx: cleanup platform header includes

arch/arm/mach-ep93xx/include/mach/hardware.h
  1. Properly name the include files so that they are loaded
     from the <mach/*> directory and not the local directory.
  2. Remove including the ts72xx.h header.  This header is not
     generic to the ep93xx platform.  It should only be included
     by the ts72xx specific files that require it.  The only
     two users in the tree are arch/arm/mach-ep93xx/ts72xx.c
     and drivers/mtd/nand/ts7250.c.

arch/arm/mach-ep93xx/include/mach/ts72xx.h
  1. <linux/io.h> should already be included by any user of this
     header.  Doing the include here hides it from being needed
     by the calling source file.

arch/arm/mach-ep93xx/core.c
  1. Remove unnecessary headers.  They were probably included
     originally due to cut-and-paste from other files.
  2. <linux/io.h> should be included not <mach/gpio.h>

arch/arm/mach-ep93xx/adsphere.c
arch/arm/mach-ep93xx/edb93xx.c
arch/arm/mach-ep93xx/gesbc9312.c
arch/arm/mach-ep93xx/micro9.c
arch/arm/mach-ep93xx/ts72xx.c
  1. Remove unnecessary headers.

arch/arm/mach-ep93xx/ts72xx.c
  1. Remove unnecessary headers.
  2. Add platform specific header <mach/ts72xx.h>.

drivers/mtd/nand/ts7250.c
  1. <linux/io.h> should be included not <asm/io.h>.
  2. Add platform specific header <mach/ts72xx.h>.

Cc: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/adssphere.c             | 11 ++++-------
 arch/arm/mach-ep93xx/core.c                  | 23 +++--------------------
 arch/arm/mach-ep93xx/edb93xx.c               | 10 ++++------
 arch/arm/mach-ep93xx/gesbc9312.c             | 11 ++++-------
 arch/arm/mach-ep93xx/include/mach/hardware.h |  7 ++-----
 arch/arm/mach-ep93xx/include/mach/ts72xx.h   |  1 -
 arch/arm/mach-ep93xx/micro9.c                | 11 +++--------
 arch/arm/mach-ep93xx/ts72xx.c                | 15 +++++++--------
 8 files changed, 27 insertions(+), 62 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index 3fbd9b0fbe2..caf6d5154ae 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -12,18 +12,15 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
+#include <linux/mtd/physmap.h>
+
 #include <mach/hardware.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+
 static struct physmap_flash_data adssphere_flash_data = {
 	.width		= 4,
 };
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 9399d3af990..ce10f5b5dfb 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -16,40 +16,23 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/sched.h>
+#include <linux/platform_device.h>
 #include <linux/interrupt.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/bitops.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_core.h>
-#include <linux/device.h>
-#include <linux/mm.h>
 #include <linux/dma-mapping.h>
-#include <linux/time.h>
 #include <linux/timex.h>
-#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
 #include <linux/termios.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/serial.h>
-#include <linux/io.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
 
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
 #include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/tlbflush.h>
-#include <asm/pgtable.h>
 
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
-#include <mach/gpio.h>
 
 #include <asm/hardware/vic.h>
 
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index e9e45b92457..73145ae5d3f 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -26,18 +26,16 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <linux/io.h>
 #include <linux/i2c.h>
+#include <linux/mtd/physmap.h>
+
 #include <mach/hardware.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+
 static struct physmap_flash_data edb93xx_flash_data;
 
 static struct resource edb93xx_flash_resource = {
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index 3bad500b71b..3da7ca816d1 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -12,18 +12,15 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
+#include <linux/mtd/physmap.h>
+
 #include <mach/hardware.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+
 static struct physmap_flash_data gesbc9312_flash_data = {
 	.width		= 4,
 };
diff --git a/arch/arm/mach-ep93xx/include/mach/hardware.h b/arch/arm/mach-ep93xx/include/mach/hardware.h
index 587c07bdec5..349fa7cb72d 100644
--- a/arch/arm/mach-ep93xx/include/mach/hardware.h
+++ b/arch/arm/mach-ep93xx/include/mach/hardware.h
@@ -4,14 +4,11 @@
 #ifndef __ASM_ARCH_HARDWARE_H
 #define __ASM_ARCH_HARDWARE_H
 
-#include "ep93xx-regs.h"
+#include <mach/ep93xx-regs.h>
+#include <mach/platform.h>
 
 #define pcibios_assign_all_busses()	0
 
-#include "platform.h"
-
-#include "ts72xx.h"
-
 /*
  * The EP93xx has two external crystal oscillators.  To generate the
  * required high-frequency clocks, the processor uses two phase-locked-
diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
index 34ddec081c4..2737666e800 100644
--- a/arch/arm/mach-ep93xx/include/mach/ts72xx.h
+++ b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
@@ -70,7 +70,6 @@
 
 
 #ifndef __ASSEMBLY__
-#include <linux/io.h>
 
 static inline int board_is_ts7200(void)
 {
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index 15d6815d78c..0a313e82fb7 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -9,21 +9,16 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
 #include <linux/kernel.h>
-#include <linux/mm.h>
+#include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
 #include <linux/mtd/physmap.h>
 
 #include <mach/hardware.h>
 
-#include <asm/mach/arch.h>
 #include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
 
 static struct ep93xx_eth_data micro9_eth_data = {
 	.phy_id		= 0x1f,
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index 7ee024d3482..5255dddd306 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -12,19 +12,18 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <linux/m48t86.h>
 #include <linux/io.h>
-#include <linux/i2c.h>
+#include <linux/m48t86.h>
+#include <linux/mtd/physmap.h>
+
 #include <mach/hardware.h>
+#include <mach/ts72xx.h>
+
 #include <asm/mach-types.h>
-#include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <asm/mach/arch.h>
+
 
 static struct map_desc ts72xx_io_desc[] __initdata = {
 	{
-- 
cgit v1.2.3


From c3e3baddbc0b6636b01cb2aa3e44505ad61be17b Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Mon, 6 Jul 2009 17:40:53 +0100
Subject: [ARM] 5593/1: ep93xx: clock.c __iomem pointer

To ensure typesafe io, the enable_reg variable should be a
void __iomem pointer not u32.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/clock.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 207e2769941..b6b53447b1b 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -26,7 +26,7 @@ struct clk {
 	unsigned long	rate;
 	int		users;
 	int		sw_locked;
-	u32		enable_reg;
+	void __iomem	*enable_reg;
 	u32		enable_mask;
 
 	unsigned long	(*get_rate)(struct clk *clk);
-- 
cgit v1.2.3


From 19c0a7286f3f0093bbbbcdce0af4c3205421b608 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Sat, 4 Jul 2009 12:26:33 +0100
Subject: [ARM] 5591/1: Add group irq enable/disable for w90p910 platform.

Add group irq enable/disable for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/irq.c | 154 +++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 146 insertions(+), 8 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-w90x900/irq.c b/arch/arm/mach-w90x900/irq.c
index 0b4fc194729..a296c9b81d2 100644
--- a/arch/arm/mach-w90x900/irq.c
+++ b/arch/arm/mach-w90x900/irq.c
@@ -10,8 +10,7 @@
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation;version 2 of the License.
  *
  */
 
@@ -29,9 +28,114 @@
 #include <mach/hardware.h>
 #include <mach/regs-irq.h>
 
+struct group_irq {
+	unsigned long		gpen;
+	unsigned int		enabled;
+	void			(*enable)(struct group_irq *, int enable);
+};
+
+static DEFINE_SPINLOCK(groupirq_lock);
+
+#define DEFINE_GROUP(_name, _ctrlbit, _num)			\
+struct group_irq group_##_name = {				\
+		.enable		= w90x900_group_enable,		\
+		.gpen		= ((2 ^ _num) - 1) << _ctrlbit,	\
+	}
+
+static void w90x900_group_enable(struct group_irq *gpirq, int enable);
+
+static DEFINE_GROUP(nirq0, 0, 4);
+static DEFINE_GROUP(nirq1, 4, 4);
+static DEFINE_GROUP(usbh, 8, 2);
+static DEFINE_GROUP(ottimer, 16, 3);
+static DEFINE_GROUP(gdma, 20, 2);
+static DEFINE_GROUP(sc, 24, 2);
+static DEFINE_GROUP(i2c, 26, 2);
+static DEFINE_GROUP(ps2, 28, 2);
+
+static int group_irq_enable(struct group_irq *group_irq)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&groupirq_lock, flags);
+	if (group_irq->enabled++ == 0)
+		(group_irq->enable)(group_irq, 1);
+	spin_unlock_irqrestore(&groupirq_lock, flags);
+
+	return 0;
+}
+
+static void group_irq_disable(struct group_irq *group_irq)
+{
+	unsigned long flags;
+
+	WARN_ON(group_irq->enabled == 0);
+
+	spin_lock_irqsave(&groupirq_lock, flags);
+	if (--group_irq->enabled == 0)
+		(group_irq->enable)(group_irq, 0);
+	spin_unlock_irqrestore(&groupirq_lock, flags);
+}
+
+static void w90x900_group_enable(struct group_irq *gpirq, int enable)
+{
+	unsigned int groupen = gpirq->gpen;
+	unsigned long regval;
+
+	regval = __raw_readl(REG_AIC_GEN);
+
+	if (enable)
+		regval |= groupen;
+	else
+		regval &= ~groupen;
+
+	__raw_writel(regval, REG_AIC_GEN);
+}
+
 static void w90x900_irq_mask(unsigned int irq)
 {
+	struct group_irq *group_irq;
+
+	group_irq = NULL;
+
 	__raw_writel(1 << irq, REG_AIC_MDCR);
+
+	switch (irq) {
+	case IRQ_GROUP0:
+		group_irq = &group_nirq0;
+		break;
+
+	case IRQ_GROUP1:
+		group_irq = &group_nirq1;
+		break;
+
+	case IRQ_USBH:
+		group_irq = &group_usbh;
+		break;
+
+	case IRQ_T_INT_GROUP:
+		group_irq = &group_ottimer;
+		break;
+
+	case IRQ_GDMAGROUP:
+		group_irq = &group_gdma;
+		break;
+
+	case IRQ_SCGROUP:
+		group_irq = &group_sc;
+		break;
+
+	case IRQ_I2CGROUP:
+		group_irq = &group_i2c;
+		break;
+
+	case IRQ_P2SGROUP:
+		group_irq = &group_ps2;
+		break;
+	}
+
+	if (group_irq)
+		group_irq_disable(group_irq);
 }
 
 /*
@@ -46,14 +150,48 @@ static void w90x900_irq_ack(unsigned int irq)
 
 static void w90x900_irq_unmask(unsigned int irq)
 {
-	unsigned long mask;
+	struct group_irq *group_irq;
+
+	group_irq = NULL;
 
-	if (irq == IRQ_T_INT_GROUP) {
-		mask = __raw_readl(REG_AIC_GEN);
-		__raw_writel(TIME_GROUP_IRQ | mask, REG_AIC_GEN);
-		__raw_writel(1 << IRQ_T_INT_GROUP, REG_AIC_MECR);
-	}
 	__raw_writel(1 << irq, REG_AIC_MECR);
+
+	switch (irq) {
+	case IRQ_GROUP0:
+		group_irq = &group_nirq0;
+		break;
+
+	case IRQ_GROUP1:
+		group_irq = &group_nirq1;
+		break;
+
+	case IRQ_USBH:
+		group_irq = &group_usbh;
+		break;
+
+	case IRQ_T_INT_GROUP:
+		group_irq = &group_ottimer;
+		break;
+
+	case IRQ_GDMAGROUP:
+		group_irq = &group_gdma;
+		break;
+
+	case IRQ_SCGROUP:
+		group_irq = &group_sc;
+		break;
+
+	case IRQ_I2CGROUP:
+		group_irq = &group_i2c;
+		break;
+
+	case IRQ_P2SGROUP:
+		group_irq = &group_ps2;
+		break;
+	}
+
+	if (group_irq)
+		group_irq_enable(group_irq);
 }
 
 static struct irq_chip w90x900_irq_chip = {
-- 
cgit v1.2.3


From d7dbf6ea40a2859adaca2dfdbbea83f3d6c73c2f Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@sirena.org.uk>
Date: Wed, 8 Jul 2009 21:12:20 +0100
Subject: [ARM] 5596/1: at91sam9g20-ek: Register WM8731 in board file

The WM8731 driver has been updated to allow registration via normal
device model methods rather than from within the ASoC driver probe
so update the AT91SAM9G20-EK to make use of this.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/board-sam9g20ek.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index cc270beadd5..4c259870088 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -221,6 +221,7 @@ static struct gpio_led ek_leds[] = {
 static struct i2c_board_info __initdata ek_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("24c512", 0x50),
+		I2C_BOARD_INFO("wm8731", 0x1b),
 	},
 };
 
-- 
cgit v1.2.3


From 13892cf95d2edf0d3c4285cc2d0113efa73be723 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Thu, 9 Jul 2009 20:56:14 +0100
Subject: [ARM] Update mach-types

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/tools/mach-types | 37 +++++++++++++++++++++++++++++++++++--
 1 file changed, 35 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 33026eff2aa..30af4329469 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Sat Jun 20 22:28:39 2009
+# Last update: Thu Jul 9 20:56:13 2009
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -1769,7 +1769,7 @@ mx31cicada		MACH_MX31CICADA		MX31CICADA		1777
 mi424wr			MACH_MI424WR		MI424WR			1778
 axs_ultrax		MACH_AXS_ULTRAX		AXS_ULTRAX		1779
 at572d940deb		MACH_AT572D940DEB	AT572D940DEB		1780
-davinci_da8xx_evm	MACH_DAVINCI_DA8XX_EVM	DAVINCI_DA8XX_EVM	1781
+davinci_da830_evm	MACH_DAVINCI_DA830_EVM	DAVINCI_DA830_EVM	1781
 ep9302			MACH_EP9302		EP9302			1782
 at572d940hfek		MACH_AT572D940HFEB	AT572D940HFEB		1783
 cybook3			MACH_CYBOOK3		CYBOOK3			1784
@@ -2280,3 +2280,36 @@ htcrhodium		MACH_HTCRHODIUM		HTCRHODIUM		2292
 htctopaz		MACH_HTCTOPAZ		HTCTOPAZ		2293
 matrix504		MACH_MATRIX504		MATRIX504		2294
 mrfsa			MACH_MRFSA		MRFSA			2295
+sc_p270			MACH_SC_P270		SC_P270			2296
+atlas5_evb		MACH_ATLAS5_EVB		ATLAS5_EVB		2297
+pelco_lobox		MACH_PELCO_LOBOX	PELCO_LOBOX		2298
+dilax_pcu200		MACH_DILAX_PCU200	DILAX_PCU200		2299
+leonardo		MACH_LEONARDO		LEONARDO		2300
+zoran_approach7		MACH_ZORAN_APPROACH7	ZORAN_APPROACH7		2301
+dp6xx			MACH_DP6XX		DP6XX			2302
+bcm2153_vesper		MACH_BCM2153_VESPER	BCM2153_VESPER		2303
+mahimahi		MACH_MAHIMAHI		MAHIMAHI		2304
+clickc			MACH_CLICKC		CLICKC			2305
+zb_gateway		MACH_ZB_GATEWAY		ZB_GATEWAY		2306
+tazcard			MACH_TAZCARD		TAZCARD			2307
+tazdev			MACH_TAZDEV		TAZDEV			2308
+annax_cb_arm		MACH_ANNAX_CB_ARM	ANNAX_CB_ARM		2309
+annax_dm3		MACH_ANNAX_DM3		ANNAX_DM3		2310
+cerebric		MACH_CEREBRIC		CEREBRIC		2311
+orca			MACH_ORCA		ORCA			2312
+pc9260			MACH_PC9260		PC9260			2313
+ems285a			MACH_EMS285A		EMS285A			2314
+gec2410			MACH_GEC2410		GEC2410			2315
+gec2440			MACH_GEC2440		GEC2440			2316
+mw903			MACH_ARCH_MW903		ARCH_MW903		2317
+mw2440			MACH_MW2440		MW2440			2318
+ecac2378		MACH_ECAC2378		ECAC2378		2319
+tazkiosk		MACH_TAZKIOSK		TAZKIOSK		2320
+whiterabbit_mch		MACH_WHITERABBIT_MCH	WHITERABBIT_MCH		2321
+sbox9263		MACH_SBOX9263		SBOX9263		2322
+oreo			MACH_OREO		OREO			2323
+smdk6442		MACH_SMDK6442		SMDK6442		2324
+openrd_base		MACH_OPENRD_BASE	OPENRD_BASE		2325
+incredible		MACH_INCREDIBLE		INCREDIBLE		2326
+incrediblec		MACH_INCREDIBLEC	INCREDIBLEC		2327
+heroct			MACH_HEROCT		HEROCT			2328
-- 
cgit v1.2.3


From ee0049d49ad2556222a7b3127be2dae11982f7b3 Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Sat, 11 Jul 2009 09:31:58 +0800
Subject: [ARM] remove duplicated #include

Remove duplicated #include('s) in
  arch/arm/mach-mx3/devices.c
  arch/arm/mach-omap1/mcbsp.c
  arch/arm/mach-omap2/mcbsp.c
  arch/arm/plat-stmp3xxx/pinmux.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-mx3/devices.c     | 1 -
 arch/arm/mach-omap1/mcbsp.c     | 1 -
 arch/arm/mach-omap2/mcbsp.c     | 1 -
 arch/arm/plat-stmp3xxx/pinmux.c | 1 -
 4 files changed, 4 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index d927eddcad4..9e87e08fb12 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -22,7 +22,6 @@
 #include <linux/platform_device.h>
 #include <linux/serial.h>
 #include <linux/gpio.h>
-#include <linux/dma-mapping.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/common.h>
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index a2d7814896b..505d98cfe50 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -19,7 +19,6 @@
 
 #include <mach/irqs.h>
 #include <mach/dma.h>
-#include <mach/irqs.h>
 #include <mach/mux.h>
 #include <mach/cpu.h>
 #include <mach/mcbsp.h>
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index a5c0f0435cd..99b6e154631 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -19,7 +19,6 @@
 
 #include <mach/irqs.h>
 #include <mach/dma.h>
-#include <mach/irqs.h>
 #include <mach/mux.h>
 #include <mach/cpu.h>
 #include <mach/mcbsp.h>
diff --git a/arch/arm/plat-stmp3xxx/pinmux.c b/arch/arm/plat-stmp3xxx/pinmux.c
index d4120038220..6d6b1a468ed 100644
--- a/arch/arm/plat-stmp3xxx/pinmux.c
+++ b/arch/arm/plat-stmp3xxx/pinmux.c
@@ -22,7 +22,6 @@
 #include <linux/sysdev.h>
 #include <linux/string.h>
 #include <linux/bitops.h>
-#include <linux/sysdev.h>
 #include <linux/irq.h>
 
 #include <mach/hardware.h>
-- 
cgit v1.2.3


From f7a55fa6ecef8be6d15bd79a803e44a3187ce9d6 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sat, 11 Jul 2009 16:51:40 +0100
Subject: [ARM] remove L_PTE_BUFFERABLE and L_PTE_CACHEABLE

These old symbols are meaningless now that we have memory type
support implemented.  The entire memory type field needs to be
modified rather than just a few bits twiddled.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/pgtable.h | 2 --
 arch/arm/mm/proc-macros.S      | 6 ------
 2 files changed, 8 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index c433c6c7311..d575666d5c4 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -164,8 +164,6 @@ extern void __pgd_error(const char *file, int line, unsigned long val);
 #define L_PTE_PRESENT		(1 << 0)
 #define L_PTE_FILE		(1 << 1)	/* only when !PRESENT */
 #define L_PTE_YOUNG		(1 << 1)
-#define L_PTE_BUFFERABLE	(1 << 2)	/* obsolete, matches PTE */
-#define L_PTE_CACHEABLE		(1 << 3)	/* obsolete, matches PTE */
 #define L_PTE_DIRTY		(1 << 6)
 #define L_PTE_WRITE		(1 << 7)
 #define L_PTE_USER		(1 << 8)
diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
index 54b1f721dec..a0b3f36f317 100644
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -80,12 +80,6 @@
 #if L_PTE_SHARED != PTE_EXT_SHARED
 #error PTE shared bit mismatch
 #endif
-#if L_PTE_BUFFERABLE != PTE_BUFFERABLE
-#error PTE bufferable bit mismatch
-#endif
-#if L_PTE_CACHEABLE != PTE_CACHEABLE
-#error PTE cacheable bit mismatch
-#endif
 #if (L_PTE_EXEC+L_PTE_USER+L_PTE_WRITE+L_PTE_DIRTY+L_PTE_YOUNG+\
      L_PTE_FILE+L_PTE_PRESENT) > L_PTE_SHARED
 #error Invalid Linux PTE bit settings
-- 
cgit v1.2.3


From 6a00cded91532f3d58e07729ba56269339281d8e Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sat, 11 Jul 2009 16:57:20 +0100
Subject: [ARM] pgtable: rearrange file PTE bit allocation

For future compatibility, we need to ensure that swap and file Linux
PTEs conform with the hardware PTEs "fault" encoding.  Swap PTEs
already fit in with this, but file PTEs do not.  Shift them by one
bit to ensure that they conform, using bit 2 to distinguish between
swap and file PTEs.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/pgtable.h | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index d575666d5c4..9655bce3d34 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -162,8 +162,8 @@ extern void __pgd_error(const char *file, int line, unsigned long val);
  * entries are stored 1024 bytes below.
  */
 #define L_PTE_PRESENT		(1 << 0)
-#define L_PTE_FILE		(1 << 1)	/* only when !PRESENT */
 #define L_PTE_YOUNG		(1 << 1)
+#define L_PTE_FILE		(1 << 2)	/* only when !PRESENT */
 #define L_PTE_DIRTY		(1 << 6)
 #define L_PTE_WRITE		(1 << 7)
 #define L_PTE_USER		(1 << 8)
@@ -379,13 +379,13 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
  *
  *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
  *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- *   <--------------- offset --------------------> <--- type --> 0 0
+ *   <--------------- offset --------------------> <- type --> 0 0 0
  *
- * This gives us up to 127 swap files and 32GB per swap file.  Note that
+ * This gives us up to 63 swap files and 32GB per swap file.  Note that
  * the offset field is always non-zero.
  */
-#define __SWP_TYPE_SHIFT	2
-#define __SWP_TYPE_BITS		7
+#define __SWP_TYPE_SHIFT	3
+#define __SWP_TYPE_BITS		6
 #define __SWP_TYPE_MASK		((1 << __SWP_TYPE_BITS) - 1)
 #define __SWP_OFFSET_SHIFT	(__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
 
@@ -409,13 +409,13 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
  *
  *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
  *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- *   <------------------------ offset -------------------------> 1 0
+ *   <----------------------- offset ------------------------> 1 0 0
  */
 #define pte_file(pte)		(pte_val(pte) & L_PTE_FILE)
-#define pte_to_pgoff(x)		(pte_val(x) >> 2)
-#define pgoff_to_pte(x)		__pte(((x) << 2) | L_PTE_FILE)
+#define pte_to_pgoff(x)		(pte_val(x) >> 3)
+#define pgoff_to_pte(x)		__pte(((x) << 3) | L_PTE_FILE)
 
-#define PTE_FILE_MAX_BITS	30
+#define PTE_FILE_MAX_BITS	29
 
 /* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
 /* FIXME: this is not correct */
-- 
cgit v1.2.3


From 5396730b3caad500ceba84c9391143cafb5938a8 Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Thu, 9 Jul 2009 23:22:07 +0100
Subject: [ARM] 5598/1: ep93xx: core.c typesafe vic_init

The EP93XX_VIC{1/2}_BASE defines are now typesafe due to
[ARM] 5573/1: ep93xx: ensure typesafe io.  The (void *) cast
is not needed when calling vic_init().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index ce10f5b5dfb..68ac0545f57 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -345,8 +345,8 @@ void __init ep93xx_init_irq(void)
 {
 	int gpio_irq;
 
-	vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
-	vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
+	vic_init(EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
+	vic_init(EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
 
 	for (gpio_irq = gpio_to_irq(0);
 	     gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) {
-- 
cgit v1.2.3


From 5b1c3c858cff4da95b9f7091eef424e706784cab Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Mon, 13 Jul 2009 19:50:10 +0100
Subject: [ARM] 5600/1: ep93xx: core.c remove cast when copying dev_addr

The MAC address for the ep93xx ethernet driver can be optionally
copied from registers in the controller when booting.  Due to
[ARM] 5573/1: ep93xx: ensure typesafe io, the cast for the source
address is no longer needed.

EP93XX_ETHERNET_BASE is typed as a (void __iomem __force *) so
memcpy_fromio() needs to be used instead of memcpy().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/core.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 68ac0545f57..4c38941a92c 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -541,10 +541,8 @@ static struct platform_device ep93xx_eth_device = {
 
 void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
 {
-	if (copy_addr) {
-		memcpy(data->dev_addr,
-			(void *)(EP93XX_ETHERNET_BASE + 0x50), 6);
-	}
+	if (copy_addr)
+		memcpy_fromio(data->dev_addr, EP93XX_ETHERNET_BASE + 0x50, 6);
 
 	ep93xx_eth_data = *data;
 	platform_device_register(&ep93xx_eth_device);
-- 
cgit v1.2.3


From 595c050d89e91e91cca3845e48b01042677bd19e Mon Sep 17 00:00:00 2001
From: Ryan Mallon <ryan@bluewatersys.com>
Date: Wed, 15 Jul 2009 21:31:46 +0100
Subject: [ARM] 5605/1: Fix ep93xx gpio.c headers

Fix a number of build errors in ep93xx gpio.c due to to missing irq.h

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/gpio.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c
index 2d83d69e2ee..1ea8871e03a 100644
--- a/arch/arm/mach-ep93xx/gpio.c
+++ b/arch/arm/mach-ep93xx/gpio.c
@@ -18,6 +18,7 @@
 #include <linux/seq_file.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/irq.h>
 
 #include <mach/hardware.h>
 
-- 
cgit v1.2.3


From fbeeea5386ab213bd55b223f3a75c823fccd6df5 Mon Sep 17 00:00:00 2001
From: Ryan Mallon <ryan@bluewatersys.com>
Date: Wed, 15 Jul 2009 21:51:59 +0100
Subject: [ARM] 5607/1: ep93xx: Use __iomem pointer on syscon write function

Change the reg argument of the ep93xx_syscon_swlocked_write function
to be an __iomem pointer. Fixes a number of build warnings.

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/core.c                  | 2 +-
 arch/arm/mach-ep93xx/include/mach/platform.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 4c38941a92c..b390c35f8bc 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -377,7 +377,7 @@ void __init ep93xx_init_irq(void)
  */
 static DEFINE_SPINLOCK(syscon_swlock);
 
-void ep93xx_syscon_swlocked_write(unsigned int val, unsigned int reg)
+void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg)
 {
 	unsigned long flags;
 
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index fb5e59a3ea0..0af0a3ba704 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -17,7 +17,7 @@ void ep93xx_init_irq(void);
 void ep93xx_init_time(unsigned long);
 
 /* EP93xx System Controller software locked register write */
-void ep93xx_syscon_swlocked_write(unsigned int val, unsigned int reg);
+void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg);
 void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits);
 
 static inline void ep93xx_devcfg_set_bits(unsigned int bits)
-- 
cgit v1.2.3


From 5d43f11bcf854d83b24c7ca6bb15d9ab9130159f Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Thu, 16 Jul 2009 22:46:31 +0100
Subject: [ARM] 5609/1: ep93xx: add register defines for keypad support

Add missing register defines for ep93xx keypad clock support.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index 087d22b8f35..a11ae779baa 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -206,6 +206,11 @@
 #define EP93XX_SYSCON_DEVCFG_ADCPD	(1<<2)
 #define EP93XX_SYSCON_DEVCFG_KEYS	(1<<1)
 #define EP93XX_SYSCON_DEVCFG_SHENA	(1<<0)
+#define EP93XX_SYSCON_KEYTCHCLKDIV	EP93XX_SYSCON_REG(0x90)
+#define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN	(1<<31)
+#define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV	(1<<16)
+#define EP93XX_SYSCON_KEYTCHCLKDIV_KEN	(1<<15)
+#define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV	(1<<0)
 #define EP93XX_SYSCON_SWLOCK		EP93XX_SYSCON_REG(0xc0)
 
 #define EP93XX_WATCHDOG_BASE		EP93XX_APB_IOMEM(0x00140000)
-- 
cgit v1.2.3


From d2c241955095b129459985a8c02d85b70984b945 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Tue, 14 Jul 2009 15:09:54 +0100
Subject: [ARM] 5601/1: Add HAVE_CLK depends on for w90p910 platform

Add HAVE_CLK depends on for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/arm')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aef63c8e3d2..c3fed1ee730 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -493,6 +493,7 @@ config ARCH_W90X900
 	select CPU_ARM926T
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_GPIO
+	select HAVE_CLK
 	select COMMON_CLKDEV
 	help
 		Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
-- 
cgit v1.2.3


From db58e90fdbe9d12b431ae8d8e856961ce75d74f0 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Tue, 14 Jul 2009 15:10:43 +0100
Subject: [ARM] 5602/1: Add sub clock api for w90p910 platform

Add sub clock api for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/clock.c   | 18 ++++++++++++++++++
 arch/arm/mach-w90x900/clock.h   |  8 ++++++++
 arch/arm/mach-w90x900/w90p910.c |  6 ++++++
 3 files changed, 32 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-w90x900/clock.c b/arch/arm/mach-w90x900/clock.c
index f420613cd39..49cf1fbc14e 100644
--- a/arch/arm/mach-w90x900/clock.c
+++ b/arch/arm/mach-w90x900/clock.c
@@ -25,6 +25,8 @@
 
 #include "clock.h"
 
+#define SUBCLK 0x24
+
 static DEFINE_SPINLOCK(clocks_lock);
 
 int clk_enable(struct clk *clk)
@@ -68,6 +70,22 @@ void w90x900_clk_enable(struct clk *clk, int enable)
 	__raw_writel(clken, W90X900_VA_CLKPWR);
 }
 
+void w90x900_subclk_enable(struct clk *clk, int enable)
+{
+	unsigned int clocks = clk->cken;
+	unsigned long clken;
+
+	clken = __raw_readl(W90X900_VA_CLKPWR + SUBCLK);
+
+	if (enable)
+		clken |= clocks;
+	else
+		clken &= ~clocks;
+
+	__raw_writel(clken, W90X900_VA_CLKPWR + SUBCLK);
+}
+
+
 void clks_register(struct clk_lookup *clks, size_t num)
 {
 	int i;
diff --git a/arch/arm/mach-w90x900/clock.h b/arch/arm/mach-w90x900/clock.h
index 4f27bda76d5..d2f0e50a70b 100644
--- a/arch/arm/mach-w90x900/clock.h
+++ b/arch/arm/mach-w90x900/clock.h
@@ -13,6 +13,7 @@
 #include <asm/clkdev.h>
 
 void w90x900_clk_enable(struct clk *clk, int enable);
+void w90x900_subclk_enable(struct clk *clk, int enable);
 void clks_register(struct clk_lookup *clks, size_t num);
 
 struct clk {
@@ -27,6 +28,13 @@ struct clk clk_##_name = {				\
 		.cken	= (1 << _ctrlbit),		\
 	}
 
+#define DEFINE_SUBCLK(_name, _ctrlbit)			\
+struct clk clk_##_name = {				\
+		.enable	= w90x900_subclk_enable,	\
+		.cken	= (1 << _ctrlbit),		\
+	}
+
+
 #define DEF_CLKLOOK(_clk, _devname, _conname)		\
 	{						\
 		.clk		= _clk,			\
diff --git a/arch/arm/mach-w90x900/w90p910.c b/arch/arm/mach-w90x900/w90p910.c
index 1c97e4930b7..1bde69eac3d 100644
--- a/arch/arm/mach-w90x900/w90p910.c
+++ b/arch/arm/mach-w90x900/w90p910.c
@@ -57,9 +57,12 @@ static struct map_desc w90p910_iodesc[] __initdata = {
 static DEFINE_CLK(lcd, 0);
 static DEFINE_CLK(audio, 1);
 static DEFINE_CLK(fmi, 4);
+static DEFINE_SUBCLK(ms, 0);
+static DEFINE_SUBCLK(sd, 1);
 static DEFINE_CLK(dmac, 5);
 static DEFINE_CLK(atapi, 6);
 static DEFINE_CLK(emc, 7);
+static DEFINE_SUBCLK(rmii, 2);
 static DEFINE_CLK(usbd, 8);
 static DEFINE_CLK(usbh, 9);
 static DEFINE_CLK(g2d, 10);;
@@ -75,9 +78,12 @@ static struct clk_lookup w90p910_clkregs[] = {
 	DEF_CLKLOOK(&clk_lcd, "w90p910-lcd", NULL),
 	DEF_CLKLOOK(&clk_audio, "w90p910-audio", NULL),
 	DEF_CLKLOOK(&clk_fmi, "w90p910-fmi", NULL),
+	DEF_CLKLOOK(&clk_ms, "w90p910-fmi", "MS"),
+	DEF_CLKLOOK(&clk_sd, "w90p910-fmi", "SD"),
 	DEF_CLKLOOK(&clk_dmac, "w90p910-dmac", NULL),
 	DEF_CLKLOOK(&clk_atapi, "w90p910-atapi", NULL),
 	DEF_CLKLOOK(&clk_emc, "w90p910-emc", NULL),
+	DEF_CLKLOOK(&clk_rmii, "w90p910-emc", "RMII"),
 	DEF_CLKLOOK(&clk_usbd, "w90p910-usbd", NULL),
 	DEF_CLKLOOK(&clk_usbh, "w90p910-usbh", NULL),
 	DEF_CLKLOOK(&clk_g2d, "w90p910-g2d", NULL),
-- 
cgit v1.2.3


From 0abe1856bdb68ef699c00949cf9f81fbec98d499 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Tue, 14 Jul 2009 15:12:26 +0100
Subject: [ARM] 5604/1: Add keypad multi-function pin api for w90p910 platform

Add keypad multi-function pin api for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/mfp-w90p910.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-w90x900/mfp-w90p910.c b/arch/arm/mach-w90x900/mfp-w90p910.c
index a3520fefb5e..8aec34b044c 100644
--- a/arch/arm/mach-w90x900/mfp-w90p910.c
+++ b/arch/arm/mach-w90x900/mfp-w90p910.c
@@ -90,7 +90,7 @@ void mfp_set_groupc(struct device *dev)
 }
 EXPORT_SYMBOL(mfp_set_groupc);
 
-void mfp_set_groupi(struct device *dev, int gpio)
+void mfp_set_groupi(struct device *dev)
 {
 	unsigned long mfpen;
 	const char *dev_id;
@@ -103,10 +103,14 @@ void mfp_set_groupi(struct device *dev, int gpio)
 
 	mfpen = __raw_readl(REG_MFSEL);
 
+	mfpen &= ~GPSELEI1;/*default gpio16*/
+
 	if (strcmp(dev_id, "w90p910-wdog") == 0)
 		mfpen |= GPSELEI1;/*enable wdog*/
 		else if (strcmp(dev_id, "w90p910-atapi") == 0)
 			mfpen |= GPSELEI0;/*enable atapi*/
+			else if (strcmp(dev_id, "w90p910-keypad") == 0)
+				mfpen &= ~GPSELEI0;/*enable keypad*/
 
 	__raw_writel(mfpen, REG_MFSEL);
 
-- 
cgit v1.2.3


From c197cec5fae7968a7154ee999f0a1b07938d1528 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Sat, 18 Jul 2009 10:12:25 +0100
Subject: ARM: S3C: Update hwmon device definition and name

Change the hwmon device name to something more generic as this
should be functional for both the s3c24xx and s3c64xx archs.

Since it has yet to have a driver, it is pretty safe to change
as there are no extant users.

Also add the necessary entry in devs.h which seems to have been
missed  out at somepoint.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/include/plat/devs.h | 2 ++
 arch/arm/plat-s3c24xx/devs.c          | 2 +-
 2 files changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index 2e170827e0b..1989ca1bb2b 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -46,6 +46,8 @@ extern struct platform_device s3c_device_hsmmc2;
 extern struct platform_device s3c_device_spi0;
 extern struct platform_device s3c_device_spi1;
 
+extern struct platform_device s3c_device_hwmon;
+
 extern struct platform_device s3c_device_nand;
 
 extern struct platform_device s3c_device_usbgadget;
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 4eb378c89a3..3489019b537 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -348,7 +348,7 @@ struct platform_device s3c_device_adc = {
 /* HWMON */
 
 struct platform_device s3c_device_hwmon = {
-	.name		= "s3c24xx-hwmon",
+	.name		= "s3c-hwmon",
 	.id		= -1,
 	.dev.parent	= &s3c_device_adc.dev,
 };
-- 
cgit v1.2.3


From 885f9ebe7554628967b6e93b284dd3021e1bb280 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Sat, 18 Jul 2009 10:12:26 +0100
Subject: ARM: BAST: Add hwmon device information

Add platform device information for the ADC channels to be exported
via HWMON. This exports all the ADCs not being used for the touchscreen
interface.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/mach-bast.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index ce3baba2cd7..06670bb89ca 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -45,6 +45,7 @@
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 
+#include <plat/hwmon.h>
 #include <plat/nand.h>
 #include <plat/iic.h>
 #include <mach/fb.h>
@@ -547,7 +548,35 @@ static struct i2c_board_info bast_i2c_devs[] __initdata = {
 	},
 };
 
+static struct s3c_hwmon_pdata bast_hwmon_info = {
+	/* LCD contrast (0-6.6V) */
+	.in[0] = &(struct s3c_hwmon_chcfg) {
+		.name		= "lcd-contrast",
+		.mult		= 3300,
+		.div		= 512,
+	},
+	/* LED current feedback */
+	.in[1] = &(struct s3c_hwmon_chcfg) {
+		.name		= "led-feedback",
+		.mult		= 3300,
+		.div		= 1024,
+	},
+	/* LCD feedback (0-6.6V) */
+	.in[2] = &(struct s3c_hwmon_chcfg) {
+		.name		= "lcd-feedback",
+		.mult		= 3300,
+		.div		= 512,
+	},
+	/* Vcore (1.8-2.0V), Vref 3.3V  */
+	.in[3] = &(struct s3c_hwmon_chcfg) {
+		.name		= "vcore",
+		.mult		= 3300,
+		.div		= 1024,
+	},
+};
+
 /* Standard BAST devices */
+// cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0
 
 static struct platform_device *bast_devices[] __initdata = {
 	&s3c_device_usb,
@@ -556,6 +585,8 @@ static struct platform_device *bast_devices[] __initdata = {
 	&s3c_device_i2c0,
  	&s3c_device_rtc,
 	&s3c_device_nand,
+	&s3c_device_adc,
+	&s3c_device_hwmon,
 	&bast_device_dm9k,
 	&bast_device_asix,
 	&bast_device_axpp,
@@ -588,6 +619,7 @@ static void __init bast_map_io(void)
 	s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
 
 	s3c_device_nand.dev.platform_data = &bast_nand_info;
+	s3c_device_hwmon.dev.platform_data = &bast_hwmon_info;
 
 	s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
 	s3c24xx_init_clocks(0);
-- 
cgit v1.2.3


From e170adcb406504b8acd35554c69830c11916be1f Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Sat, 18 Jul 2009 10:12:27 +0100
Subject: ARM: S3C: Add ADC synchronous read call.

To add HWMON support, we need a synchronous read() call that blocks
until completion. Add the client that is being service to the select
and convert callbacks to make the code easier.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/include/plat/adc.h |  8 +++--
 arch/arm/plat-s3c24xx/adc.c          | 64 +++++++++++++++++++++++++++++-------
 2 files changed, 59 insertions(+), 13 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c/include/plat/adc.h b/arch/arm/plat-s3c/include/plat/adc.h
index d847bd476b6..5f3b1cd53b9 100644
--- a/arch/arm/plat-s3c/include/plat/adc.h
+++ b/arch/arm/plat-s3c/include/plat/adc.h
@@ -19,10 +19,14 @@ struct s3c_adc_client;
 extern int s3c_adc_start(struct s3c_adc_client *client,
 			 unsigned int channel, unsigned int nr_samples);
 
+extern int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch);
+
 extern struct s3c_adc_client *
 	s3c_adc_register(struct platform_device *pdev,
-			 void (*select)(unsigned selected),
-			 void (*conv)(unsigned d0, unsigned d1,
+			 void (*select)(struct s3c_adc_client *client,
+					unsigned selected),
+			 void (*conv)(struct s3c_adc_client *client,
+				      unsigned d0, unsigned d1,
 				      unsigned *samples_left),
 			 unsigned int is_ts);
 
diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
index ee1baf11ad9..11117a7ba91 100644
--- a/arch/arm/plat-s3c24xx/adc.c
+++ b/arch/arm/plat-s3c24xx/adc.c
@@ -39,13 +39,16 @@
 struct s3c_adc_client {
 	struct platform_device	*pdev;
 	struct list_head	 pend;
+	wait_queue_head_t	*wait;
 
 	unsigned int		 nr_samples;
+	int			 result;
 	unsigned char		 is_ts;
 	unsigned char		 channel;
 
-	void	(*select_cb)(unsigned selected);
-	void	(*convert_cb)(unsigned val1, unsigned val2,
+	void	(*select_cb)(struct s3c_adc_client *c, unsigned selected);
+	void	(*convert_cb)(struct s3c_adc_client *c,
+			      unsigned val1, unsigned val2,
 			      unsigned *samples_left);
 };
 
@@ -81,7 +84,7 @@ static inline void s3c_adc_select(struct adc_device *adc,
 {
 	unsigned con = readl(adc->regs + S3C2410_ADCCON);
 
-	client->select_cb(1);
+	client->select_cb(client, 1);
 
 	con &= ~S3C2410_ADCCON_MUXMASK;
 	con &= ~S3C2410_ADCCON_STDBM;
@@ -153,25 +156,61 @@ int s3c_adc_start(struct s3c_adc_client *client,
 }
 EXPORT_SYMBOL_GPL(s3c_adc_start);
 
-static void s3c_adc_default_select(unsigned select)
+static void s3c_convert_done(struct s3c_adc_client *client,
+			     unsigned v, unsigned u, unsigned *left)
+{
+	client->result = v;
+	wake_up(client->wait);
+}
+
+int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch)
+{
+	DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake);
+	int ret;
+
+	client->convert_cb = s3c_convert_done;
+	client->wait = &wake;
+	client->result = -1;
+
+	ret = s3c_adc_start(client, ch, 1);
+	if (ret < 0)
+		goto err;
+
+	ret = wait_event_timeout(wake, client->result >= 0, HZ / 2);
+	if (client->result < 0) {
+		ret = -ETIMEDOUT;
+		goto err;
+	}
+
+	client->convert_cb = NULL;
+	return client->result;
+
+err:
+	return ret;
+}
+EXPORT_SYMBOL_GPL(s3c_adc_convert);
+
+static void s3c_adc_default_select(struct s3c_adc_client *client,
+				   unsigned select)
 {
 }
 
 struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
-					void (*select)(unsigned int selected),
-					void (*conv)(unsigned d0, unsigned d1,
+					void (*select)(struct s3c_adc_client *client,
+						       unsigned int selected),
+					void (*conv)(struct s3c_adc_client *client,
+						     unsigned d0, unsigned d1,
 						     unsigned *samples_left),
 					unsigned int is_ts)
 {
 	struct s3c_adc_client *client;
 
 	WARN_ON(!pdev);
-	WARN_ON(!conv);
 
 	if (!select)
 		select = s3c_adc_default_select;
 
-	if (!conv || !pdev)
+	if (!pdev)
 		return ERR_PTR(-EINVAL);
 
 	client = kzalloc(sizeof(struct s3c_adc_client), GFP_KERNEL);
@@ -230,16 +269,19 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw)
 	adc_dbg(adc, "read %d: 0x%04x, 0x%04x\n", client->nr_samples, data0, data1);
 
 	client->nr_samples--;
-	(client->convert_cb)(data0 & 0x3ff, data1 & 0x3ff, &client->nr_samples);
+
+	if (client->convert_cb)
+		(client->convert_cb)(client, data0 & 0x3ff, data1 & 0x3ff,
+				     &client->nr_samples);
 
 	if (client->nr_samples > 0) {
 		/* fire another conversion for this */
 
-		client->select_cb(1);
+		client->select_cb(client, 1);
 		s3c_adc_convert(adc);
 	} else {
 		local_irq_save(flags);
-		(client->select_cb)(0);
+		(client->select_cb)(client, 0);
 		adc->cur = NULL;
 
 		s3c_adc_try(adc);
-- 
cgit v1.2.3


From bff78650a2b0ed42b8fb134b6a9b387e00027d67 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Sat, 18 Jul 2009 10:12:28 +0100
Subject: ARM: HWMON: S3C24XX series ADC driver

Add support for the ADC controller on the S3C series of processors to
drivers/hwmon for use with hardware monitoring systems.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/include/plat/hwmon.h | 41 ++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)
 create mode 100644 arch/arm/plat-s3c/include/plat/hwmon.h

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c/include/plat/hwmon.h b/arch/arm/plat-s3c/include/plat/hwmon.h
new file mode 100644
index 00000000000..1ba88ea0aa3
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/hwmon.h
@@ -0,0 +1,41 @@
+/* linux/arch/arm/plat-s3c/include/plat/hwmon.h
+ *
+ * Copyright 2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C - HWMon interface for ADC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_ADC_HWMON_H
+#define __ASM_ARCH_ADC_HWMON_H __FILE__
+
+/**
+ * s3c_hwmon_chcfg - channel configuration
+ * @name: The name to give this channel.
+ * @mult: Multiply the ADC value read by this.
+ * @div: Divide the value from the ADC by this.
+ *
+ * The value read from the ADC is converted to a value that
+ * hwmon expects (mV) by result = (value_read * @mult) / @div.
+ */
+struct s3c_hwmon_chcfg {
+	const char	*name;
+	unsigned int	mult;
+	unsigned int	div;
+};
+
+/**
+ * s3c_hwmon_pdata - HWMON platform data
+ * @in: One configuration for each possible channel used.
+ */
+struct s3c_hwmon_pdata {
+	struct s3c_hwmon_chcfg	*in[8];
+};
+
+#endif /* __ASM_ARCH_ADC_HWMON_H */
+
-- 
cgit v1.2.3


From 3aa7a9a3cf8774f6701b1903a6353f9545f561ce Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Mon, 20 Jul 2009 18:22:36 +0100
Subject: [ARM] 5612/1: ep93xx: add platform LEDs

The EP93xx has two gpio pins specifically assigned to drive
external LEDs.  Add core support for these LEDs.

On the EDB93xx development boards, the rdled is connected to
an external reset circuit.  Turning this led on for an extended
amount of time will cause the circuit to issue a manual reset.

Refer to Cirrus App Note AN258 for more information.

	http://www.cirrus.com/en/pubs/appNote/AN258REV2.pdf

This led can be safely used as the system heartbeat with the
ledtrig-heartbeat driver.

	echo heartbeat > /sys/class/leds/platform:rdled/trigger

The grled can be used for any desired purpose.

Tested-by: Matthieu Crapet <mcrapet@gmail.com>
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/core.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index b390c35f8bc..2b58df0184c 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -22,6 +22,7 @@
 #include <linux/timex.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/leds.h>
 #include <linux/termios.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/serial.h>
@@ -568,6 +569,34 @@ void __init ep93xx_register_i2c(struct i2c_board_info *devices, int num)
 	platform_device_register(&ep93xx_i2c_device);
 }
 
+
+/*************************************************************************
+ * EP93xx LEDs
+ *************************************************************************/
+static struct gpio_led ep93xx_led_pins[] = {
+	{
+		.name			= "platform:grled",
+		.gpio			= EP93XX_GPIO_LINE_GRLED,
+	}, {
+		.name			= "platform:rdled",
+		.gpio			= EP93XX_GPIO_LINE_RDLED,
+	},
+};
+
+static struct gpio_led_platform_data ep93xx_led_data = {
+	.num_leds	= ARRAY_SIZE(ep93xx_led_pins),
+	.leds		= ep93xx_led_pins,
+};
+
+static struct platform_device ep93xx_leds = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &ep93xx_led_data,
+	},
+};
+
+
 extern void ep93xx_gpio_init(void);
 
 void __init ep93xx_init_devices(void)
@@ -583,4 +612,5 @@ void __init ep93xx_init_devices(void)
 
 	platform_device_register(&ep93xx_rtc_device);
 	platform_device_register(&ep93xx_ohci_device);
+	platform_device_register(&ep93xx_leds);
 }
-- 
cgit v1.2.3


From 4bf1fa5a34aa2dd0d2cc58f0fc213a2e22d007a4 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
Date: Tue, 21 Jul 2009 09:56:27 +0100
Subject: [ARM] 5613/1: implement CALLER_ADDRESSx
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

As __builtin_return_address(n) doesn't work for ARM with n > 0, the
kernel needs its own implementation.

This fixes many warnings saying:

	warning: unsupported argument to '__builtin_return_address'

The new methods and walk_stackframe must not be instrumented because
CALLER_ADDRESSx is used in the various tracers and tracing the tracer is
a bad idea.

What's currently missing is an implementation using unwind tables.  This
is not fatal though, it's just that the tracers don't get enough
information to be really useful.

Note that if both ARM_UNWIND and FRAME_POINTER are enabled,
walk_stackframe uses unwind information.  So in this case the same
implementation is used as when FRAME_POINTER is disabled.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/ftrace.h    | 34 +++++++++++++++++++
 arch/arm/kernel/Makefile         |  4 ++-
 arch/arm/kernel/return_address.c | 71 ++++++++++++++++++++++++++++++++++++++++
 arch/arm/kernel/stacktrace.c     |  4 +--
 4 files changed, 110 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/kernel/return_address.c

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h
index 39c8bc1a006..d74265cffd8 100644
--- a/arch/arm/include/asm/ftrace.h
+++ b/arch/arm/include/asm/ftrace.h
@@ -11,4 +11,38 @@ extern void mcount(void);
 
 #endif
 
+#ifndef __ASSEMBLY__
+
+#if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND)
+/*
+ * return_address uses walk_stackframe to do it's work.  If both
+ * CONFIG_FRAME_POINTER=y and CONFIG_ARM_UNWIND=y walk_stackframe uses unwind
+ * information.  For this to work in the function tracer many functions would
+ * have to be marked with __notrace.  So for now just depend on
+ * !CONFIG_ARM_UNWIND.
+ */
+
+void *return_address(unsigned int);
+
+#else
+
+extern inline void *return_address(unsigned int level)
+{
+	return NULL;
+}
+
+#endif
+
+#define HAVE_ARCH_CALLER_ADDR
+
+#define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0))
+#define CALLER_ADDR1 ((unsigned long)return_address(1))
+#define CALLER_ADDR2 ((unsigned long)return_address(2))
+#define CALLER_ADDR3 ((unsigned long)return_address(3))
+#define CALLER_ADDR4 ((unsigned long)return_address(4))
+#define CALLER_ADDR5 ((unsigned long)return_address(5))
+#define CALLER_ADDR6 ((unsigned long)return_address(6))
+
+#endif /* ifndef __ASSEMBLY__ */
+
 #endif /* _ASM_ARM_FTRACE */
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index ff89d0b3abc..3213c9382b1 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -8,10 +8,12 @@ ifdef CONFIG_DYNAMIC_FTRACE
 CFLAGS_REMOVE_ftrace.o = -pg
 endif
 
+CFLAGS_REMOVE_return_address.o = -pg
+
 # Object file lists.
 
 obj-y		:= compat.o elf.o entry-armv.o entry-common.o irq.o \
-		   process.o ptrace.o setup.o signal.o \
+		   process.o ptrace.o return_address.o setup.o signal.o \
 		   sys_arm.o stacktrace.o time.o traps.o
 
 obj-$(CONFIG_ISA_DMA_API)	+= dma.o
diff --git a/arch/arm/kernel/return_address.c b/arch/arm/kernel/return_address.c
new file mode 100644
index 00000000000..df246da4cec
--- /dev/null
+++ b/arch/arm/kernel/return_address.c
@@ -0,0 +1,71 @@
+/*
+ * arch/arm/kernel/return_address.c
+ *
+ * Copyright (C) 2009 Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ * for Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/module.h>
+
+#if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND)
+#include <linux/sched.h>
+
+#include <asm/stacktrace.h>
+
+struct return_address_data {
+	unsigned int level;
+	void *addr;
+};
+
+static int save_return_addr(struct stackframe *frame, void *d)
+{
+	struct return_address_data *data = d;
+
+	if (!data->level) {
+		data->addr = (void *)frame->lr;
+
+		return 1;
+	} else {
+		--data->level;
+		return 0;
+	}
+}
+
+void *return_address(unsigned int level)
+{
+	struct return_address_data data;
+	struct stackframe frame;
+	register unsigned long current_sp asm ("sp");
+
+	data.level = level + 1;
+
+	frame.fp = (unsigned long)__builtin_frame_address(0);
+	frame.sp = current_sp;
+	frame.lr = (unsigned long)__builtin_return_address(0);
+	frame.pc = (unsigned long)return_address;
+
+	walk_stackframe(&frame, save_return_addr, &data);
+
+	if (!data.level)
+		return data.addr;
+	else
+		return NULL;
+}
+
+#else /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) */
+
+#if defined(CONFIG_ARM_UNWIND)
+#warning "TODO: return_address should use unwind tables"
+#endif
+
+void *return_address(unsigned int level)
+{
+	return NULL;
+}
+
+#endif /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) / else */
+
+EXPORT_SYMBOL_GPL(return_address);
diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c
index 9f444e5cc16..20b7411e47f 100644
--- a/arch/arm/kernel/stacktrace.c
+++ b/arch/arm/kernel/stacktrace.c
@@ -21,7 +21,7 @@
  * Note that with framepointer enabled, even the leaf functions have the same
  * prologue and epilogue, therefore we can ignore the LR value in this case.
  */
-int unwind_frame(struct stackframe *frame)
+int notrace unwind_frame(struct stackframe *frame)
 {
 	unsigned long high, low;
 	unsigned long fp = frame->fp;
@@ -43,7 +43,7 @@ int unwind_frame(struct stackframe *frame)
 }
 #endif
 
-void walk_stackframe(struct stackframe *frame,
+void notrace walk_stackframe(struct stackframe *frame,
 		     int (*fn)(struct stackframe *, void *), void *data)
 {
 	while (1) {
-- 
cgit v1.2.3


From d7aacaddcac3971e33cf52d7e610c06696cb347f Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Wed, 8 Jul 2009 13:21:31 +0200
Subject: Driver Core: Add platform device arch data V3

Allow architecture specific data in struct platform_device V3.

With this patch struct pdev_archdata is added to struct
platform_device, similar to struct dev_archdata in found in
struct device. Useful for architecture code that needs to
keep extra data associated with each platform device.

Struct pdev_archdata is different from dev.platform_data, the
convention is that dev.platform_data points to driver-specific
data. It may or may not be required by the driver. The format
of this depends on driver but is the same across architectures.

The structure pdev_archdata is a place for architecture specific
data. This data is handled by architecture specific code (for
example runtime PM), and since it is architecture specific it
should _never_ be touched by device driver code. Exactly like
struct dev_archdata but for platform devices.

[rjw: This change is for power management mostly and that's why it
 goes through the suspend tree.]

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
---
 arch/arm/include/asm/device.h | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/device.h b/arch/arm/include/asm/device.h
index c61642b4060..9f390ce335c 100644
--- a/arch/arm/include/asm/device.h
+++ b/arch/arm/include/asm/device.h
@@ -12,4 +12,7 @@ struct dev_archdata {
 #endif
 };
 
+struct pdev_archdata {
+};
+
 #endif
-- 
cgit v1.2.3


From 79ee031ff6fd23a1a2a4f783cfc3421885304ce3 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Wed, 8 Jul 2009 13:22:04 +0200
Subject: ARM: Rework omap suspend_late()/resume_early()

This patch reworks platform driver power management code
for omap drivers using late/early legacy callbacks.

The callbacks are converted for CONFIG_SUSPEND like this:
  suspend_late() -> suspend_noirq()
  resume_early() -> resume_noirq()

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
---
 arch/arm/plat-omap/debug-leds.c | 11 +++++++----
 arch/arm/plat-omap/gpio.c       | 14 ++++++++++----
 2 files changed, 17 insertions(+), 8 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index be4eefda476..9395898dd49 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -281,24 +281,27 @@ static int /* __init */ fpga_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int fpga_suspend_late(struct platform_device *pdev, pm_message_t mesg)
+static int fpga_suspend_noirq(struct device *dev)
 {
 	__raw_writew(~0, &fpga->leds);
 	return 0;
 }
 
-static int fpga_resume_early(struct platform_device *pdev)
+static int fpga_resume_noirq(struct device *dev)
 {
 	__raw_writew(~hw_led_state, &fpga->leds);
 	return 0;
 }
 
+static struct dev_pm_ops fpga_dev_pm_ops = {
+	.suspend_noirq = fpga_suspend_noirq,
+	.resume_noirq = fpga_resume_noirq,
+};
 
 static struct platform_driver led_driver = {
 	.driver.name	= "omap_dbg_led",
+	.driver.pm	= &fpga_dev_pm_ops,
 	.probe		= fpga_probe,
-	.suspend_late	= fpga_suspend_late,
-	.resume_early	= fpga_resume_early,
 };
 
 static int __init fpga_init(void)
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 26b387c1242..3d03337ad42 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -1264,8 +1264,9 @@ static struct irq_chip mpuio_irq_chip = {
 
 #include <linux/platform_device.h>
 
-static int omap_mpuio_suspend_late(struct platform_device *pdev, pm_message_t mesg)
+static int omap_mpuio_suspend_noirq(struct device *dev)
 {
+	struct platform_device *pdev = to_platform_device(dev);
 	struct gpio_bank	*bank = platform_get_drvdata(pdev);
 	void __iomem		*mask_reg = bank->base + OMAP_MPUIO_GPIO_MASKIT;
 	unsigned long		flags;
@@ -1278,8 +1279,9 @@ static int omap_mpuio_suspend_late(struct platform_device *pdev, pm_message_t me
 	return 0;
 }
 
-static int omap_mpuio_resume_early(struct platform_device *pdev)
+static int omap_mpuio_resume_noirq(struct device *dev)
 {
+	struct platform_device *pdev = to_platform_device(dev);
 	struct gpio_bank	*bank = platform_get_drvdata(pdev);
 	void __iomem		*mask_reg = bank->base + OMAP_MPUIO_GPIO_MASKIT;
 	unsigned long		flags;
@@ -1291,14 +1293,18 @@ static int omap_mpuio_resume_early(struct platform_device *pdev)
 	return 0;
 }
 
+static struct dev_pm_ops omap_mpuio_dev_pm_ops = {
+	.suspend_noirq = omap_mpuio_suspend_noirq,
+	.resume_noirq = omap_mpuio_resume_noirq,
+};
+
 /* use platform_driver for this, now that there's no longer any
  * point to sys_device (other than not disturbing old code).
  */
 static struct platform_driver omap_mpuio_driver = {
-	.suspend_late	= omap_mpuio_suspend_late,
-	.resume_early	= omap_mpuio_resume_early,
 	.driver		= {
 		.name	= "mpuio",
+		.pm	= &omap_mpuio_dev_pm_ops,
 	},
 };
 
-- 
cgit v1.2.3


From 52ec7752b457311f10f5a8d16faa8ac2e684eb65 Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Wed, 22 Jul 2009 21:51:40 -0700
Subject: Input: pxa27x_keypad - remove extra clk_disable

clk_disable() in remove method is not needed since we already
have clk_disable in pxa27x_keypad_close().

Also make sure the driver uses resource_size() and helpers from
include/input/matrix_keypad.h

Tested-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 arch/arm/mach-pxa/include/mach/pxa27x_keypad.h | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h b/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
index d5a48a96dea..63e8965ad85 100644
--- a/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
+++ b/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
@@ -2,6 +2,7 @@
 #define __ASM_ARCH_PXA27x_KEYPAD_H
 
 #include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
 
 #define MAX_MATRIX_KEY_ROWS	(8)
 #define MAX_MATRIX_KEY_COLS	(8)
@@ -51,8 +52,6 @@ struct pxa27x_keypad_platform_data {
 	unsigned int	debounce_interval;
 };
 
-#define KEY(row, col, val)	(((row) << 28) | ((col) << 24) | (val))
-
 extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info);
 
 #endif /* __ASM_ARCH_PXA27x_KEYPAD_H */
-- 
cgit v1.2.3


From 42ff4cf957b695250534e540375e23507c722327 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Fri, 17 Jul 2009 14:42:33 +0100
Subject: [ARM] 5610/1: Add fmi resource define for w90p910 platform

Add fmi resource define for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/mach-w90p910evb.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c
index 7a62bd348e8..3b9fa312d9f 100644
--- a/arch/arm/mach-w90x900/mach-w90p910evb.c
+++ b/arch/arm/mach-w90x900/mach-w90p910evb.c
@@ -228,6 +228,28 @@ struct platform_device w90x900_device_usbgadget = {
 };
 EXPORT_SYMBOL(w90x900_device_usbgadget);
 
+/* FMI Device */
+
+static struct resource w90p910_fmi_resource[] = {
+	[0] = {
+		.start = W90X900_PA_FMI,
+		.end   = W90X900_PA_FMI + W90X900_SZ_FMI - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_FMI,
+		.end   = IRQ_FMI,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device w90p910_device_fmi = {
+	.name		= "w90p910-fmi",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(w90p910_fmi_resource),
+	.resource	= w90p910_fmi_resource,
+};
+
 static struct map_desc w90p910_iodesc[] __initdata = {
 };
 
@@ -242,6 +264,7 @@ static struct platform_device *w90p910evb_dev[] __initdata = {
 	&w90x900_device_rtc,
 	&w90x900_device_kpi,
 	&w90x900_device_usbgadget,
+	&w90p910_device_fmi,
 };
 
 static void __init w90p910evb_map_io(void)
-- 
cgit v1.2.3


From 768db4e04b4c969cf3a9e81a79a10af6468ca56d Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Thu, 23 Jul 2009 08:47:57 +0100
Subject: [ARM] 5616/1: Add mac resource define for w90p910 mac driver

Add mac resource define for w90p910 mac driver.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/mach-w90p910evb.c | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c
index 3b9fa312d9f..2e56d84c632 100644
--- a/arch/arm/mach-w90x900/mach-w90p910evb.c
+++ b/arch/arm/mach-w90x900/mach-w90p910evb.c
@@ -250,6 +250,38 @@ static struct platform_device w90p910_device_fmi = {
 	.resource	= w90p910_fmi_resource,
 };
 
+/* MAC device */
+
+static struct resource w90x900_emc_resource[] = {
+	[0] = {
+		.start = W90X900_PA_EMC,
+		.end   = W90X900_PA_EMC + W90X900_SZ_EMC - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_EMCTX,
+		.end   = IRQ_EMCTX,
+		.flags = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start = IRQ_EMCRX,
+		.end   = IRQ_EMCRX,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 w90x900_device_emc_dmamask = 0xffffffffUL;
+static struct platform_device w90p910_device_emc = {
+	.name		= "w90p910-emc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(w90x900_emc_resource),
+	.resource	= w90x900_emc_resource,
+	.dev              = {
+		.dma_mask = &w90x900_device_emc_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+
 static struct map_desc w90p910_iodesc[] __initdata = {
 };
 
@@ -265,6 +297,7 @@ static struct platform_device *w90p910evb_dev[] __initdata = {
 	&w90x900_device_kpi,
 	&w90x900_device_usbgadget,
 	&w90p910_device_fmi,
+	&w90p910_device_emc,
 };
 
 static void __init w90p910evb_map_io(void)
-- 
cgit v1.2.3


From b48147663b2582bfb91a2bf39f9d1ffe8f209122 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Thu, 23 Jul 2009 08:50:20 +0100
Subject: [ARM] 5617/1: rename this spi device as w90p910-spi

When programming clock api, I named this spi device
as w90p910-usi, now, I think named it as w90p910-spi better

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/w90p910.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-w90x900/w90p910.c b/arch/arm/mach-w90x900/w90p910.c
index 1bde69eac3d..6ebf5cfc78d 100644
--- a/arch/arm/mach-w90x900/w90p910.c
+++ b/arch/arm/mach-w90x900/w90p910.c
@@ -93,7 +93,7 @@ static struct clk_lookup w90p910_clkregs[] = {
 	DEF_CLKLOOK(&clk_wdt, "w90p910-wdt", NULL),
 	DEF_CLKLOOK(&clk_gdma, "w90p910-gdma", NULL),
 	DEF_CLKLOOK(&clk_adc, "w90p910-adc", NULL),
-	DEF_CLKLOOK(&clk_usi, "w90p910-usi", NULL),
+	DEF_CLKLOOK(&clk_usi, "w90p910-spi", NULL),
 };
 
 /* Initial serial platform data */
-- 
cgit v1.2.3


From c16d5d5657294e782d505efd00bbf2452d6aa0ca Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Thu, 23 Jul 2009 08:51:46 +0100
Subject: [ARM] 5618/1: Add spi resource define for w90p910 spi driver

Add spi resource define for w90p910 spi driver.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/mach-w90p910evb.c | 61 +++++++++++++++++++++++++++++++++
 1 file changed, 61 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c
index 2e56d84c632..3e3a267b2dd 100644
--- a/arch/arm/mach-w90x900/mach-w90p910evb.c
+++ b/arch/arm/mach-w90x900/mach-w90p910evb.c
@@ -20,7 +20,13 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+
 #include <linux/mtd/physmap.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -35,6 +41,8 @@
 
 #define W90P910_FLASH_BASE	0xA0000000
 #define W90P910_FLASH_SIZE	0x400000
+#define SPIOFFSET		0x200
+#define SPIOREG_SIZE		0x100
 
 static struct mtd_partition w90p910_flash_partitions[] = {
 	{
@@ -282,6 +290,56 @@ static struct platform_device w90p910_device_emc = {
 	}
 };
 
+/* SPI device */
+
+static struct resource w90p910_spi_resource[] = {
+	[0] = {
+		.start = W90X900_PA_I2C + SPIOFFSET,
+		.end   = W90X900_PA_I2C + SPIOFFSET + SPIOREG_SIZE - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_SSP,
+		.end   = IRQ_SSP,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device w90p910_device_spi = {
+	.name		= "w90p910-spi",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(w90p910_spi_resource),
+	.resource	= w90p910_spi_resource,
+};
+
+/* spi device, spi flash info */
+
+static struct mtd_partition w90p910_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x0100000,
+		.offset = 0,
+	},
+};
+
+static struct flash_platform_data w90p910_spi_flash_data = {
+	.name = "m25p80",
+	.parts =  w90p910_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(w90p910_spi_flash_partitions),
+	.type = "w25x16",
+};
+
+static struct spi_board_info w90p910_spi_board_info[] __initdata = {
+	{
+		.modalias = "m25p80",
+		.max_speed_hz = 20000000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.platform_data = &w90p910_spi_flash_data,
+		.mode = SPI_MODE_0,
+	},
+};
+
 static struct map_desc w90p910_iodesc[] __initdata = {
 };
 
@@ -298,6 +356,7 @@ static struct platform_device *w90p910evb_dev[] __initdata = {
 	&w90x900_device_usbgadget,
 	&w90p910_device_fmi,
 	&w90p910_device_emc,
+	&w90p910_device_spi,
 };
 
 static void __init w90p910evb_map_io(void)
@@ -309,6 +368,8 @@ static void __init w90p910evb_map_io(void)
 static void __init w90p910evb_init(void)
 {
 	platform_add_devices(w90p910evb_dev, ARRAY_SIZE(w90p910evb_dev));
+	spi_register_board_info(w90p910_spi_board_info,
+					ARRAY_SIZE(w90p910_spi_board_info));
 }
 
 MACHINE_START(W90P910EVB, "W90P910EVB")
-- 
cgit v1.2.3


From 3f3f1d9d8de10a5dad0d22046cdd26dfb93d05c9 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Thu, 23 Jul 2009 08:52:51 +0100
Subject: [ARM] 5619/1: Add spi mfp api for w90p910 spi driver

Add spi mfp api for w90p910 spi driver.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/mfp-w90p910.c | 38 +++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-w90x900/mfp-w90p910.c b/arch/arm/mach-w90x900/mfp-w90p910.c
index 8aec34b044c..e11a32b6856 100644
--- a/arch/arm/mach-w90x900/mfp-w90p910.c
+++ b/arch/arm/mach-w90x900/mfp-w90p910.c
@@ -34,6 +34,12 @@
 #define GPSELEI0	(0x01 << 26)
 #define GPSELEI1	(0x01 << 27)
 
+#define GPIOG0TO1	(0x03 << 14)
+#define GPIOG2TO3	(0x03 << 16)
+#define ENSPI		(0x0a << 14)
+#define ENI2C0		(0x01 << 14)
+#define ENI2C1		(0x01 << 16)
+
 static DECLARE_MUTEX(mfp_sem);
 
 void mfp_set_groupf(struct device *dev)
@@ -118,3 +124,35 @@ void mfp_set_groupi(struct device *dev)
 }
 EXPORT_SYMBOL(mfp_set_groupi);
 
+void mfp_set_groupg(struct device *dev)
+{
+	unsigned long mfpen;
+	const char *dev_id;
+
+	BUG_ON(!dev);
+
+	down(&mfp_sem);
+
+	dev_id = dev_name(dev);
+
+	mfpen = __raw_readl(REG_MFSEL);
+
+	if (strcmp(dev_id, "w90p910-spi") == 0) {
+		mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);
+		mfpen |= ENSPI;/*enable spi*/
+	} else if (strcmp(dev_id, "w90p910-i2c0") == 0) {
+		mfpen &= ~(GPIOG0TO1);
+		mfpen |= ENI2C0;/*enable i2c0*/
+	} else if (strcmp(dev_id, "w90p910-i2c1") == 0) {
+		mfpen &= ~(GPIOG2TO3);
+		mfpen |= ENI2C1;/*enable i2c1*/
+	} else {
+		mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);/*GPIOG[3:0]*/
+	}
+
+	__raw_writel(mfpen, REG_MFSEL);
+
+	up(&mfp_sem);
+}
+EXPORT_SYMBOL(mfp_set_groupg);
+
-- 
cgit v1.2.3


From 4fef5f90edc80aae92efec049750de93be9e25cb Mon Sep 17 00:00:00 2001
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
Date: Wed, 1 Jul 2009 20:20:23 +0530
Subject: OMAP4: sDMA: Update the request lines and new registers.

This patch updates the platform dma.h with new dma request lines
for OMAP4 peripherals. Also additional hardware register of OMAP4
sDMA module are included.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/include/mach/dma.h | 88 +++++++++++++++++++++++++++++++++++
 1 file changed, 88 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h
index 7b939cc0196..72f680b7180 100644
--- a/arch/arm/plat-omap/include/mach/dma.h
+++ b/arch/arm/plat-omap/include/mach/dma.h
@@ -122,6 +122,11 @@
 #define OMAP_DMA4_CCFN(n)		(0x60 * (n) + 0xc0)
 #define OMAP_DMA4_COLOR(n)		(0x60 * (n) + 0xc4)
 
+/* Additional registers available on OMAP4 */
+#define OMAP_DMA4_CDP(n)		(0x60 * (n) + 0xd0)
+#define OMAP_DMA4_CNDP(n)		(0x60 * (n) + 0xd4)
+#define OMAP_DMA4_CCDN(n)		(0x60 * (n) + 0xd8)
+
 /* Dummy defines to keep multi-omap compiles happy */
 #define OMAP1_DMA_REVISION		0
 #define OMAP1_DMA_IRQSTATUS_L0		0
@@ -311,6 +316,89 @@
 #define OMAP34XX_DMA_USIM_TX		79	/* S_DMA_78 */
 #define OMAP34XX_DMA_USIM_RX		80	/* S_DMA_79 */
 
+/* DMA request lines for 44xx */
+#define OMAP44XX_DMA_DSS_DISPC_REQ	6	/* S_DMA_5 */
+#define OMAP44XX_DMA_SYS_REQ2		7	/* S_DMA_6 */
+#define OMAP44XX_DMA_ISS_REQ1		9	/* S_DMA_8 */
+#define OMAP44XX_DMA_ISS_REQ2		10	/* S_DMA_9 */
+#define OMAP44XX_DMA_ISS_REQ3		12	/* S_DMA_11 */
+#define OMAP44XX_DMA_ISS_REQ4		13	/* S_DMA_12 */
+#define OMAP44XX_DMA_DSS_RFBI_REQ	14	/* S_DMA_13 */
+#define OMAP44XX_DMA_SPI3_TX0		15	/* S_DMA_14 */
+#define OMAP44XX_DMA_SPI3_RX0		16	/* S_DMA_15 */
+#define OMAP44XX_DMA_MCBSP2_TX		17	/* S_DMA_16 */
+#define OMAP44XX_DMA_MCBSP2_RX		18	/* S_DMA_17 */
+#define OMAP44XX_DMA_MCBSP3_TX		19	/* S_DMA_18 */
+#define OMAP44XX_DMA_MCBSP3_RX		20	/* S_DMA_19 */
+#define OMAP44XX_DMA_SPI3_TX1		23	/* S_DMA_22 */
+#define OMAP44XX_DMA_SPI3_RX1		24	/* S_DMA_23 */
+#define OMAP44XX_DMA_I2C3_TX		25	/* S_DMA_24 */
+#define OMAP44XX_DMA_I2C3_RX		26	/* S_DMA_25 */
+#define OMAP44XX_DMA_I2C1_TX		27	/* S_DMA_26 */
+#define OMAP44XX_DMA_I2C1_RX		28	/* S_DMA_27 */
+#define OMAP44XX_DMA_I2C2_TX		29	/* S_DMA_28 */
+#define OMAP44XX_DMA_I2C2_RX		30	/* S_DMA_29 */
+#define OMAP44XX_DMA_MCBSP4_TX		31	/* S_DMA_30 */
+#define OMAP44XX_DMA_MCBSP4_RX		32	/* S_DMA_31 */
+#define OMAP44XX_DMA_MCBSP1_TX		33	/* S_DMA_32 */
+#define OMAP44XX_DMA_MCBSP1_RX		34	/* S_DMA_33 */
+#define OMAP44XX_DMA_SPI1_TX0		35	/* S_DMA_34 */
+#define OMAP44XX_DMA_SPI1_RX0		36	/* S_DMA_35 */
+#define OMAP44XX_DMA_SPI1_TX1		37	/* S_DMA_36 */
+#define OMAP44XX_DMA_SPI1_RX1		38	/* S_DMA_37 */
+#define OMAP44XX_DMA_SPI1_TX2		39	/* S_DMA_38 */
+#define OMAP44XX_DMA_SPI1_RX2		40	/* S_DMA_39 */
+#define OMAP44XX_DMA_SPI1_TX3		41	/* S_DMA_40 */
+#define OMAP44XX_DMA_SPI1_RX3		42	/* S_DMA_41 */
+#define OMAP44XX_DMA_SPI2_TX0		43	/* S_DMA_42 */
+#define OMAP44XX_DMA_SPI2_RX0		44	/* S_DMA_43 */
+#define OMAP44XX_DMA_SPI2_TX1		45	/* S_DMA_44 */
+#define OMAP44XX_DMA_SPI2_RX1		46	/* S_DMA_45 */
+#define OMAP44XX_DMA_MMC2_TX		47	/* S_DMA_46 */
+#define OMAP44XX_DMA_MMC2_RX		48	/* S_DMA_47 */
+#define OMAP44XX_DMA_UART1_TX		49	/* S_DMA_48 */
+#define OMAP44XX_DMA_UART1_RX		50	/* S_DMA_49 */
+#define OMAP44XX_DMA_UART2_TX		51	/* S_DMA_50 */
+#define OMAP44XX_DMA_UART2_RX		52	/* S_DMA_51 */
+#define OMAP44XX_DMA_UART3_TX		53	/* S_DMA_52 */
+#define OMAP44XX_DMA_UART3_RX		54	/* S_DMA_53 */
+#define OMAP44XX_DMA_UART4_TX		55	/* S_DMA_54 */
+#define OMAP44XX_DMA_UART4_RX		56	/* S_DMA_55 */
+#define OMAP44XX_DMA_MMC4_TX		57	/* S_DMA_56 */
+#define OMAP44XX_DMA_MMC4_RX		58	/* S_DMA_57 */
+#define OMAP44XX_DMA_MMC5_TX		59	/* S_DMA_58 */
+#define OMAP44XX_DMA_MMC5_RX		60	/* S_DMA_59 */
+#define OMAP44XX_DMA_MMC1_TX		61	/* S_DMA_60 */
+#define OMAP44XX_DMA_MMC1_RX		62	/* S_DMA_61 */
+#define OMAP44XX_DMA_SYS_REQ3		64	/* S_DMA_63 */
+#define OMAP44XX_DMA_MCPDM_UP		65	/* S_DMA_64 */
+#define OMAP44XX_DMA_MCPDM_DL		66	/* S_DMA_65 */
+#define OMAP44XX_DMA_SPI4_TX0		70	/* S_DMA_69 */
+#define OMAP44XX_DMA_SPI4_RX0		71	/* S_DMA_70 */
+#define OMAP44XX_DMA_DSS_DSI1_REQ0	72	/* S_DMA_71 */
+#define OMAP44XX_DMA_DSS_DSI1_REQ1	73	/* S_DMA_72 */
+#define OMAP44XX_DMA_DSS_DSI1_REQ2	74	/* S_DMA_73 */
+#define OMAP44XX_DMA_DSS_DSI1_REQ3	75	/* S_DMA_74 */
+#define OMAP44XX_DMA_DSS_HDMI_REQ	76	/* S_DMA_75 */
+#define OMAP44XX_DMA_MMC3_TX		77	/* S_DMA_76 */
+#define OMAP44XX_DMA_MMC3_RX		78	/* S_DMA_77 */
+#define OMAP44XX_DMA_USIM_TX		79	/* S_DMA_78 */
+#define OMAP44XX_DMA_USIM_RX		80	/* S_DMA_79 */
+#define OMAP44XX_DMA_DSS_DSI2_REQ0	81	/* S_DMA_80 */
+#define OMAP44XX_DMA_DSS_DSI2_REQ1	82	/* S_DMA_81 */
+#define OMAP44XX_DMA_DSS_DSI2_REQ2	83	/* S_DMA_82 */
+#define OMAP44XX_DMA_DSS_DSI2_REQ3	84	/* S_DMA_83 */
+#define OMAP44XX_DMA_ABE_REQ0		101	/* S_DMA_100 */
+#define OMAP44XX_DMA_ABE_REQ1		102	/* S_DMA_101 */
+#define OMAP44XX_DMA_ABE_REQ2		103	/* S_DMA_102 */
+#define OMAP44XX_DMA_ABE_REQ3		104	/* S_DMA_103 */
+#define OMAP44XX_DMA_ABE_REQ4		105	/* S_DMA_104 */
+#define OMAP44XX_DMA_ABE_REQ5		106	/* S_DMA_105 */
+#define OMAP44XX_DMA_ABE_REQ6		107	/* S_DMA_106 */
+#define OMAP44XX_DMA_ABE_REQ7		108	/* S_DMA_107 */
+#define OMAP44XX_DMA_I2C4_TX		124	/* S_DMA_123 */
+#define OMAP44XX_DMA_I2C4_RX		125	/* S_DMA_124 */
+
 /*----------------------------------------------------------------------------*/
 
 /* Hardware registers for LCD DMA */
-- 
cgit v1.2.3


From 88987ef91b99cf99bc5d167caeb31d4958fbf931 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:32:52 +0100
Subject: Thumb-2: Add some .align statements to the .S files

Since the Thumb-2 instructions can be 16-bit wide, data in the .text
sections may not be aligned to a 32-bit word and this leads to unaligned
exceptions. This patch does not affect the ARM code generation.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/boot/compressed/head.S | 3 +++
 arch/arm/kernel/entry-armv.S    | 4 ++++
 arch/arm/kernel/head-common.S   | 2 ++
 arch/arm/lib/sha1.S             | 2 ++
 arch/arm/vfp/entry.S            | 2 ++
 5 files changed, 13 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 4515728c534..82f5fcfd956 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -291,6 +291,7 @@ wont_overwrite:	mov	r0, r4
 		bl	decompress_kernel
 		b	call_kernel
 
+		.align	2
 		.type	LC0, #object
 LC0:		.word	LC0			@ r1
 		.word	__bss_start		@ r2
@@ -589,6 +590,7 @@ call_cache_fn:	adr	r12, proc_types
  * methods.  Writeback caches _must_ have the flush method
  * defined.
  */
+		.align	2
 		.type	proc_types,#object
 proc_types:
 		.word	0x41560600		@ ARM6/610
@@ -945,6 +947,7 @@ __armv3_mpu_cache_flush:
  * memory, which again must be relocatable.
  */
 #ifdef DEBUG
+		.align	2
 		.type	phexbuf,#object
 phexbuf:	.space	12
 		.size	phexbuf, . - phexbuf
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index fc8af43c500..0befd1cabf4 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -1065,6 +1065,10 @@ vector_\name:
 	ldr	lr, [pc, lr, lsl #2]
 	movs	pc, lr			@ branch to handler in SVC mode
 ENDPROC(vector_\name)
+
+	.align	2
+	@ handler addresses follow this label
+1:
 	.endm
 
 	.globl	__stubs_start
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index 991952c644d..dbfaef07a1f 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -14,6 +14,7 @@
 #define ATAG_CORE 0x54410001
 #define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2)
 
+	.align	2
 	.type	__switch_data, %object
 __switch_data:
 	.long	__mmap_switched
@@ -185,6 +186,7 @@ ENDPROC(lookup_processor_type)
  * Look in <asm/procinfo.h> and arch/arm/kernel/arch.[ch] for
  * more information about the __proc_info and __arch_info structures.
  */
+	.align	2
 	.long	__proc_info_begin
 	.long	__proc_info_end
 3:	.long	.
diff --git a/arch/arm/lib/sha1.S b/arch/arm/lib/sha1.S
index a16fb208c84..09b548cac1a 100644
--- a/arch/arm/lib/sha1.S
+++ b/arch/arm/lib/sha1.S
@@ -187,6 +187,7 @@ ENTRY(sha_transform)
 
 ENDPROC(sha_transform)
 
+	.align	2
 .L_sha_K:
 	.word	0x5a827999, 0x6ed9eba1, 0x8f1bbcdc, 0xca62c1d6
 
@@ -195,6 +196,7 @@ ENDPROC(sha_transform)
  * void sha_init(__u32 *buf)
  */
 
+	.align	2
 .L_sha_initial_digest:
 	.word	0x67452301, 0xefcdab89, 0x98badcfe, 0x10325476, 0xc3d2e1f0
 
diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S
index a2bed62aec2..4fa9903b83c 100644
--- a/arch/arm/vfp/entry.S
+++ b/arch/arm/vfp/entry.S
@@ -42,6 +42,7 @@ ENTRY(vfp_null_entry)
 	mov	pc, lr
 ENDPROC(vfp_null_entry)
 
+	.align	2
 .LCvfp:
 	.word	vfp_vector
 
@@ -61,6 +62,7 @@ ENTRY(vfp_testing_entry)
 	mov	pc, r9			@ we have handled the fault
 ENDPROC(vfp_testing_entry)
 
+	.align	2
 VFP_arch_address:
 	.word	VFP_arch
 
-- 
cgit v1.2.3


From 0becb088501886f37ade38762c8eaaf4263572cc Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:32:53 +0100
Subject: Thumb-2: Add macros for the unified assembler syntax

This patch adds various C and assembler macros that help with using
the unified assembler syntax for compiling files to either ARM or
Thumb-2 modes.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/Kconfig               |   3 +
 arch/arm/Makefile              |   2 +-
 arch/arm/include/asm/unified.h | 126 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 130 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/include/asm/unified.h

(limited to 'arch/arm')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aef63c8e3d2..da28e7ba608 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -983,6 +983,9 @@ config HZ
 	default AT91_TIMER_HZ if ARCH_AT91
 	default 100
 
+config ARM_ASM_UNIFIED
+	bool
+
 config AEABI
 	bool "Use the ARM EABI to compile the kernel"
 	help
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c877d6df23d..3505572a21e 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -95,7 +95,7 @@ endif
 
 # Need -Uarm for gcc < 3.x
 KBUILD_CFLAGS	+=$(CFLAGS_ABI) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
-KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(arch-y) $(tune-y) -msoft-float
+KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float
 
 CHECKFLAGS	+= -D__arm__
 
diff --git a/arch/arm/include/asm/unified.h b/arch/arm/include/asm/unified.h
new file mode 100644
index 00000000000..073e85b9b96
--- /dev/null
+++ b/arch/arm/include/asm/unified.h
@@ -0,0 +1,126 @@
+/*
+ * include/asm-arm/unified.h - Unified Assembler Syntax helper macros
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_UNIFIED_H
+#define __ASM_UNIFIED_H
+
+#if defined(__ASSEMBLY__) && defined(CONFIG_ARM_ASM_UNIFIED)
+	.syntax unified
+#endif
+
+#ifdef CONFIG_THUMB2_KERNEL
+
+#if __GNUC__ < 4
+#error Thumb-2 kernel requires gcc >= 4
+#endif
+
+/* The CPSR bit describing the instruction set (Thumb) */
+#define PSR_ISETSTATE	PSR_T_BIT
+
+#define ARM(x...)
+#define THUMB(x...)	x
+#define W(instr)	instr.w
+#define BSYM(sym)	sym + 1
+
+#else	/* !CONFIG_THUMB2_KERNEL */
+
+/* The CPSR bit describing the instruction set (ARM) */
+#define PSR_ISETSTATE	0
+
+#define ARM(x...)	x
+#define THUMB(x...)
+#define W(instr)	instr
+#define BSYM(sym)	sym
+
+#endif	/* CONFIG_THUMB2_KERNEL */
+
+#ifndef CONFIG_ARM_ASM_UNIFIED
+
+/*
+ * If the unified assembly syntax isn't used (in ARM mode), these
+ * macros expand to an empty string
+ */
+#ifdef __ASSEMBLY__
+	.macro	it, cond
+	.endm
+	.macro	itt, cond
+	.endm
+	.macro	ite, cond
+	.endm
+	.macro	ittt, cond
+	.endm
+	.macro	itte, cond
+	.endm
+	.macro	itet, cond
+	.endm
+	.macro	itee, cond
+	.endm
+	.macro	itttt, cond
+	.endm
+	.macro	ittte, cond
+	.endm
+	.macro	ittet, cond
+	.endm
+	.macro	ittee, cond
+	.endm
+	.macro	itett, cond
+	.endm
+	.macro	itete, cond
+	.endm
+	.macro	iteet, cond
+	.endm
+	.macro	iteee, cond
+	.endm
+#else	/* !__ASSEMBLY__ */
+__asm__(
+"	.macro	it, cond\n"
+"	.endm\n"
+"	.macro	itt, cond\n"
+"	.endm\n"
+"	.macro	ite, cond\n"
+"	.endm\n"
+"	.macro	ittt, cond\n"
+"	.endm\n"
+"	.macro	itte, cond\n"
+"	.endm\n"
+"	.macro	itet, cond\n"
+"	.endm\n"
+"	.macro	itee, cond\n"
+"	.endm\n"
+"	.macro	itttt, cond\n"
+"	.endm\n"
+"	.macro	ittte, cond\n"
+"	.endm\n"
+"	.macro	ittet, cond\n"
+"	.endm\n"
+"	.macro	ittee, cond\n"
+"	.endm\n"
+"	.macro	itett, cond\n"
+"	.endm\n"
+"	.macro	itete, cond\n"
+"	.endm\n"
+"	.macro	iteet, cond\n"
+"	.endm\n"
+"	.macro	iteee, cond\n"
+"	.endm\n");
+#endif	/* __ASSEMBLY__ */
+
+#endif	/* CONFIG_ARM_ASM_UNIFIED */
+
+#endif	/* !__ASM_UNIFIED_H */
-- 
cgit v1.2.3


From b86040a59feb255a8193173caa4d5199464433d5 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:32:54 +0100
Subject: Thumb-2: Implementation of the unified start-up and exceptions code

This patch implements the ARM/Thumb-2 unified kernel start-up and
exception handling code.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/include/asm/assembler.h |  11 +++
 arch/arm/include/asm/futex.h     |   1 +
 arch/arm/kernel/entry-armv.S     | 165 +++++++++++++++++++++++----------------
 arch/arm/kernel/entry-common.S   |  28 ++-----
 arch/arm/kernel/entry-header.S   |  92 ++++++++++++++++++++--
 arch/arm/kernel/head-common.S    |  13 +--
 arch/arm/kernel/head-nommu.S     |  11 ++-
 arch/arm/kernel/head.S           |  28 ++++---
 arch/arm/kernel/process.c        |   2 +-
 arch/arm/kernel/setup.c          |  28 +++++--
 arch/arm/kernel/unwind.c         |   4 +
 11 files changed, 263 insertions(+), 120 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 15f8a092b70..1acd1da36d0 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -127,3 +127,14 @@
 #endif
 #endif
 	.endm
+
+#ifdef CONFIG_THUMB2_KERNEL
+	.macro	setmode, mode, reg
+	mov	\reg, #\mode
+	msr	cpsr_c, \reg
+	.endm
+#else
+	.macro	setmode, mode, reg
+	msr	cpsr_c, #\mode
+	.endm
+#endif
diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h
index 9ee743b95de..bfcc15929a7 100644
--- a/arch/arm/include/asm/futex.h
+++ b/arch/arm/include/asm/futex.h
@@ -99,6 +99,7 @@ futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
 	__asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n"
 	"1:	ldrt	%0, [%3]\n"
 	"	teq	%0, %1\n"
+	"	it	eq	@ explicit IT needed for the 2b label\n"
 	"2:	streqt	%2, [%3]\n"
 	"3:\n"
 	"	.section __ex_table,\"a\"\n"
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 0befd1cabf4..468425f937d 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -34,7 +34,7 @@
 	@
 	@ routine called with r0 = irq number, r1 = struct pt_regs *
 	@
-	adrne	lr, 1b
+	adrne	lr, BSYM(1b)
 	bne	asm_do_IRQ
 
 #ifdef CONFIG_SMP
@@ -46,13 +46,13 @@
 	 */
 	test_for_ipi r0, r6, r5, lr
 	movne	r0, sp
-	adrne	lr, 1b
+	adrne	lr, BSYM(1b)
 	bne	do_IPI
 
 #ifdef CONFIG_LOCAL_TIMERS
 	test_for_ltirq r0, r6, r5, lr
 	movne	r0, sp
-	adrne	lr, 1b
+	adrne	lr, BSYM(1b)
 	bne	do_local_timer
 #endif
 #endif
@@ -70,7 +70,10 @@
  */
 	.macro	inv_entry, reason
 	sub	sp, sp, #S_FRAME_SIZE
-	stmib	sp, {r1 - lr}
+ ARM(	stmib	sp, {r1 - lr}		)
+ THUMB(	stmia	sp, {r0 - r12}		)
+ THUMB(	str	sp, [sp, #S_SP]		)
+ THUMB(	str	lr, [sp, #S_LR]		)
 	mov	r1, #\reason
 	.endm
 
@@ -126,17 +129,24 @@ ENDPROC(__und_invalid)
 	.macro	svc_entry, stack_hole=0
  UNWIND(.fnstart		)
  UNWIND(.save {r0 - pc}		)
-	sub	sp, sp, #(S_FRAME_SIZE + \stack_hole)
+	sub	sp, sp, #(S_FRAME_SIZE + \stack_hole - 4)
+#ifdef CONFIG_THUMB2_KERNEL
+ SPFIX(	str	r0, [sp]	)	@ temporarily saved
+ SPFIX(	mov	r0, sp		)
+ SPFIX(	tst	r0, #4		)	@ test original stack alignment
+ SPFIX(	ldr	r0, [sp]	)	@ restored
+#else
  SPFIX(	tst	sp, #4		)
- SPFIX(	bicne	sp, sp, #4	)
-	stmib	sp, {r1 - r12}
+#endif
+ SPFIX(	subeq	sp, sp, #4	)
+	stmia	sp, {r1 - r12}
 
 	ldmia	r0, {r1 - r3}
-	add	r5, sp, #S_SP		@ here for interlock avoidance
+	add	r5, sp, #S_SP - 4	@ here for interlock avoidance
 	mov	r4, #-1			@  ""  ""      ""       ""
-	add	r0, sp, #(S_FRAME_SIZE + \stack_hole)
- SPFIX(	addne	r0, r0, #4	)
-	str	r1, [sp]		@ save the "real" r0 copied
+	add	r0, sp, #(S_FRAME_SIZE + \stack_hole - 4)
+ SPFIX(	addeq	r0, r0, #4	)
+	str	r1, [sp, #-4]!		@ save the "real" r0 copied
 					@ from the exception stack
 
 	mov	r1, lr
@@ -196,9 +206,8 @@ __dabt_svc:
 	@
 	@ restore SPSR and restart the instruction
 	@
-	ldr	r0, [sp, #S_PSR]
-	msr	spsr_cxsf, r0
-	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+	ldr	r2, [sp, #S_PSR]
+	svc_exit r2				@ return from exception
  UNWIND(.fnend		)
 ENDPROC(__dabt_svc)
 
@@ -225,13 +234,12 @@ __irq_svc:
 	tst	r0, #_TIF_NEED_RESCHED
 	blne	svc_preempt
 #endif
-	ldr	r0, [sp, #S_PSR]		@ irqs are already disabled
-	msr	spsr_cxsf, r0
+	ldr	r4, [sp, #S_PSR]		@ irqs are already disabled
 #ifdef CONFIG_TRACE_IRQFLAGS
-	tst	r0, #PSR_I_BIT
+	tst	r4, #PSR_I_BIT
 	bleq	trace_hardirqs_on
 #endif
-	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+	svc_exit r4				@ return from exception
  UNWIND(.fnend		)
 ENDPROC(__irq_svc)
 
@@ -266,7 +274,7 @@ __und_svc:
 	@  r0 - instruction
 	@
 	ldr	r0, [r2, #-4]
-	adr	r9, 1f
+	adr	r9, BSYM(1f)
 	bl	call_fpe
 
 	mov	r0, sp				@ struct pt_regs *regs
@@ -280,9 +288,8 @@ __und_svc:
 	@
 	@ restore SPSR and restart the instruction
 	@
-	ldr	lr, [sp, #S_PSR]		@ Get SVC cpsr
-	msr	spsr_cxsf, lr
-	ldmia	sp, {r0 - pc}^			@ Restore SVC registers
+	ldr	r2, [sp, #S_PSR]		@ Get SVC cpsr
+	svc_exit r2				@ return from exception
  UNWIND(.fnend		)
 ENDPROC(__und_svc)
 
@@ -323,9 +330,8 @@ __pabt_svc:
 	@
 	@ restore SPSR and restart the instruction
 	@
-	ldr	r0, [sp, #S_PSR]
-	msr	spsr_cxsf, r0
-	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+	ldr	r2, [sp, #S_PSR]
+	svc_exit r2				@ return from exception
  UNWIND(.fnend		)
 ENDPROC(__pabt_svc)
 
@@ -353,7 +359,8 @@ ENDPROC(__pabt_svc)
  UNWIND(.fnstart	)
  UNWIND(.cantunwind	)	@ don't unwind the user space
 	sub	sp, sp, #S_FRAME_SIZE
-	stmib	sp, {r1 - r12}
+ ARM(	stmib	sp, {r1 - r12}	)
+ THUMB(	stmia	sp, {r0 - r12}	)
 
 	ldmia	r0, {r1 - r3}
 	add	r0, sp, #S_PC		@ here for interlock avoidance
@@ -372,7 +379,8 @@ ENDPROC(__pabt_svc)
 	@ Also, separately save sp_usr and lr_usr
 	@
 	stmia	r0, {r2 - r4}
-	stmdb	r0, {sp, lr}^
+ ARM(	stmdb	r0, {sp, lr}^			)
+ THUMB(	store_user_sp_lr r0, r1, S_SP - S_PC	)
 
 	@
 	@ Enable the alignment trap while in kernel mode
@@ -427,7 +435,7 @@ __dabt_usr:
 	@
 	enable_irq
 	mov	r2, sp
-	adr	lr, ret_from_exception
+	adr	lr, BSYM(ret_from_exception)
 	b	do_DataAbort
  UNWIND(.fnend		)
 ENDPROC(__dabt_usr)
@@ -452,7 +460,9 @@ __irq_usr:
 	ldr	r0, [tsk, #TI_PREEMPT]
 	str	r8, [tsk, #TI_PREEMPT]
 	teq	r0, r7
-	strne	r0, [r0, -r0]
+ ARM(	strne	r0, [r0, -r0]	)
+ THUMB(	movne	r0, #0		)
+ THUMB(	strne	r0, [r0]	)
 #endif
 #ifdef CONFIG_TRACE_IRQFLAGS
 	bl	trace_hardirqs_on
@@ -476,9 +486,10 @@ __und_usr:
 	@
 	@  r0 - instruction
 	@
-	adr	r9, ret_from_exception
-	adr	lr, __und_usr_unknown
+	adr	r9, BSYM(ret_from_exception)
+	adr	lr, BSYM(__und_usr_unknown)
 	tst	r3, #PSR_T_BIT			@ Thumb mode?
+	itet	eq				@ explicit IT needed for the 1f label
 	subeq	r4, r2, #4			@ ARM instr at LR - 4
 	subne	r4, r2, #2			@ Thumb instr at LR - 2
 1:	ldreqt	r0, [r4]
@@ -488,7 +499,10 @@ __und_usr:
 	beq	call_fpe
 	@ Thumb instruction
 #if __LINUX_ARM_ARCH__ >= 7
-2:	ldrht	r5, [r4], #2
+2:
+ ARM(	ldrht	r5, [r4], #2	)
+ THUMB(	ldrht	r5, [r4]	)
+ THUMB(	add	r4, r4, #2	)
 	and	r0, r5, #0xf800			@ mask bits 111x x... .... ....
 	cmp	r0, #0xe800			@ 32bit instruction if xx != 0
 	blo	__und_usr_unknown
@@ -577,9 +591,11 @@ call_fpe:
 	moveq	pc, lr
 	get_thread_info r10			@ get current thread
 	and	r8, r0, #0x00000f00		@ mask out CP number
+ THUMB(	lsr	r8, r8, #8		)
 	mov	r7, #1
 	add	r6, r10, #TI_USED_CP
-	strb	r7, [r6, r8, lsr #8]		@ set appropriate used_cp[]
+ ARM(	strb	r7, [r6, r8, lsr #8]	)	@ set appropriate used_cp[]
+ THUMB(	strb	r7, [r6, r8]		)	@ set appropriate used_cp[]
 #ifdef CONFIG_IWMMXT
 	@ Test if we need to give access to iWMMXt coprocessors
 	ldr	r5, [r10, #TI_FLAGS]
@@ -587,36 +603,38 @@ call_fpe:
 	movcss	r7, r5, lsr #(TIF_USING_IWMMXT + 1)
 	bcs	iwmmxt_task_enable
 #endif
-	add	pc, pc, r8, lsr #6
-	mov	r0, r0
-
-	mov	pc, lr				@ CP#0
-	b	do_fpe				@ CP#1 (FPE)
-	b	do_fpe				@ CP#2 (FPE)
-	mov	pc, lr				@ CP#3
+ ARM(	add	pc, pc, r8, lsr #6	)
+ THUMB(	lsl	r8, r8, #2		)
+ THUMB(	add	pc, r8			)
+	nop
+
+	W(mov)	pc, lr				@ CP#0
+	W(b)	do_fpe				@ CP#1 (FPE)
+	W(b)	do_fpe				@ CP#2 (FPE)
+	W(mov)	pc, lr				@ CP#3
 #ifdef CONFIG_CRUNCH
 	b	crunch_task_enable		@ CP#4 (MaverickCrunch)
 	b	crunch_task_enable		@ CP#5 (MaverickCrunch)
 	b	crunch_task_enable		@ CP#6 (MaverickCrunch)
 #else
-	mov	pc, lr				@ CP#4
-	mov	pc, lr				@ CP#5
-	mov	pc, lr				@ CP#6
+	W(mov)	pc, lr				@ CP#4
+	W(mov)	pc, lr				@ CP#5
+	W(mov)	pc, lr				@ CP#6
 #endif
-	mov	pc, lr				@ CP#7
-	mov	pc, lr				@ CP#8
-	mov	pc, lr				@ CP#9
+	W(mov)	pc, lr				@ CP#7
+	W(mov)	pc, lr				@ CP#8
+	W(mov)	pc, lr				@ CP#9
 #ifdef CONFIG_VFP
-	b	do_vfp				@ CP#10 (VFP)
-	b	do_vfp				@ CP#11 (VFP)
+	W(b)	do_vfp				@ CP#10 (VFP)
+	W(b)	do_vfp				@ CP#11 (VFP)
 #else
-	mov	pc, lr				@ CP#10 (VFP)
-	mov	pc, lr				@ CP#11 (VFP)
+	W(mov)	pc, lr				@ CP#10 (VFP)
+	W(mov)	pc, lr				@ CP#11 (VFP)
 #endif
-	mov	pc, lr				@ CP#12
-	mov	pc, lr				@ CP#13
-	mov	pc, lr				@ CP#14 (Debug)
-	mov	pc, lr				@ CP#15 (Control)
+	W(mov)	pc, lr				@ CP#12
+	W(mov)	pc, lr				@ CP#13
+	W(mov)	pc, lr				@ CP#14 (Debug)
+	W(mov)	pc, lr				@ CP#15 (Control)
 
 #ifdef CONFIG_NEON
 	.align	6
@@ -667,7 +685,7 @@ no_fp:	mov	pc, lr
 __und_usr_unknown:
 	enable_irq
 	mov	r0, sp
-	adr	lr, ret_from_exception
+	adr	lr, BSYM(ret_from_exception)
 	b	do_undefinstr
 ENDPROC(__und_usr_unknown)
 
@@ -711,7 +729,10 @@ ENTRY(__switch_to)
  UNWIND(.cantunwind	)
 	add	ip, r1, #TI_CPU_SAVE
 	ldr	r3, [r2, #TI_TP_VALUE]
-	stmia	ip!, {r4 - sl, fp, sp, lr}	@ Store most regs on stack
+ ARM(	stmia	ip!, {r4 - sl, fp, sp, lr} )	@ Store most regs on stack
+ THUMB(	stmia	ip!, {r4 - sl, fp}	   )	@ Store most regs on stack
+ THUMB(	str	sp, [ip], #4		   )
+ THUMB(	str	lr, [ip], #4		   )
 #ifdef CONFIG_MMU
 	ldr	r6, [r2, #TI_CPU_DOMAIN]
 #endif
@@ -736,8 +757,12 @@ ENTRY(__switch_to)
 	ldr	r0, =thread_notify_head
 	mov	r1, #THREAD_NOTIFY_SWITCH
 	bl	atomic_notifier_call_chain
+ THUMB(	mov	ip, r4			   )
 	mov	r0, r5
-	ldmia	r4, {r4 - sl, fp, sp, pc}	@ Load all regs saved previously
+ ARM(	ldmia	r4, {r4 - sl, fp, sp, pc}  )	@ Load all regs saved previously
+ THUMB(	ldmia	ip!, {r4 - sl, fp}	   )	@ Load all regs saved previously
+ THUMB(	ldr	sp, [ip], #4		   )
+ THUMB(	ldr	pc, [ip]		   )
  UNWIND(.fnend		)
 ENDPROC(__switch_to)
 
@@ -772,6 +797,7 @@ ENDPROC(__switch_to)
  * if your compiled code is not going to use the new instructions for other
  * purpose.
  */
+ THUMB(	.arm	)
 
 	.macro	usr_ret, reg
 #ifdef CONFIG_ARM_THUMB
@@ -1020,6 +1046,7 @@ __kuser_helper_version:				@ 0xffff0ffc
 	.globl	__kuser_helper_end
 __kuser_helper_end:
 
+ THUMB(	.thumb	)
 
 /*
  * Vector stubs.
@@ -1054,15 +1081,17 @@ vector_\name:
 	@ Prepare for SVC32 mode.  IRQs remain disabled.
 	@
 	mrs	r0, cpsr
-	eor	r0, r0, #(\mode ^ SVC_MODE)
+	eor	r0, r0, #(\mode ^ SVC_MODE | PSR_ISETSTATE)
 	msr	spsr_cxsf, r0
 
 	@
 	@ the branch table must immediately follow this code
 	@
 	and	lr, lr, #0x0f
+ THUMB(	adr	r0, 1f			)
+ THUMB(	ldr	lr, [r0, lr, lsl #2]	)
 	mov	r0, sp
-	ldr	lr, [pc, lr, lsl #2]
+ ARM(	ldr	lr, [pc, lr, lsl #2]	)
 	movs	pc, lr			@ branch to handler in SVC mode
 ENDPROC(vector_\name)
 
@@ -1206,14 +1235,16 @@ __stubs_end:
 
 	.globl	__vectors_start
 __vectors_start:
-	swi	SYS_ERROR0
-	b	vector_und + stubs_offset
-	ldr	pc, .LCvswi + stubs_offset
-	b	vector_pabt + stubs_offset
-	b	vector_dabt + stubs_offset
-	b	vector_addrexcptn + stubs_offset
-	b	vector_irq + stubs_offset
-	b	vector_fiq + stubs_offset
+ ARM(	swi	SYS_ERROR0	)
+ THUMB(	svc	#0		)
+ THUMB(	nop			)
+	W(b)	vector_und + stubs_offset
+	W(ldr)	pc, .LCvswi + stubs_offset
+	W(b)	vector_pabt + stubs_offset
+	W(b)	vector_dabt + stubs_offset
+	W(b)	vector_addrexcptn + stubs_offset
+	W(b)	vector_irq + stubs_offset
+	W(b)	vector_fiq + stubs_offset
 
 	.globl	__vectors_end
 __vectors_end:
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 366e5097a41..a0540c9f1f0 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -33,14 +33,7 @@ ret_fast_syscall:
 	/* perform architecture specific actions before user return */
 	arch_ret_to_user r1, lr
 
-	@ fast_restore_user_regs
-	ldr	r1, [sp, #S_OFF + S_PSR]	@ get calling cpsr
-	ldr	lr, [sp, #S_OFF + S_PC]!	@ get pc
-	msr	spsr_cxsf, r1			@ save in spsr_svc
-	ldmdb	sp, {r1 - lr}^			@ get calling r1 - lr
-	mov	r0, r0
-	add	sp, sp, #S_FRAME_SIZE - S_PC
-	movs	pc, lr				@ return & move spsr_svc into cpsr
+	restore_user_regs fast = 1, offset = S_OFF
  UNWIND(.fnend		)
 
 /*
@@ -73,14 +66,7 @@ no_work_pending:
 	/* perform architecture specific actions before user return */
 	arch_ret_to_user r1, lr
 
-	@ slow_restore_user_regs
-	ldr	r1, [sp, #S_PSR]		@ get calling cpsr
-	ldr	lr, [sp, #S_PC]!		@ get pc
-	msr	spsr_cxsf, r1			@ save in spsr_svc
-	ldmdb	sp, {r0 - lr}^			@ get calling r0 - lr
-	mov	r0, r0
-	add	sp, sp, #S_FRAME_SIZE - S_PC
-	movs	pc, lr				@ return & move spsr_svc into cpsr
+	restore_user_regs fast = 0, offset = 0
 ENDPROC(ret_to_user)
 
 /*
@@ -182,8 +168,10 @@ ftrace_stub:
 ENTRY(vector_swi)
 	sub	sp, sp, #S_FRAME_SIZE
 	stmia	sp, {r0 - r12}			@ Calling r0 - r12
-	add	r8, sp, #S_PC
-	stmdb	r8, {sp, lr}^			@ Calling sp, lr
+ ARM(	add	r8, sp, #S_PC		)
+ ARM(	stmdb	r8, {sp, lr}^		)	@ Calling sp, lr
+ THUMB(	mov	r8, sp			)
+ THUMB(	store_user_sp_lr r8, r10, S_SP	)	@ calling sp, lr
 	mrs	r8, spsr			@ called from non-FIQ mode, so ok.
 	str	lr, [sp, #S_PC]			@ Save calling PC
 	str	r8, [sp, #S_PSR]		@ Save CPSR
@@ -272,7 +260,7 @@ ENTRY(vector_swi)
 	bne	__sys_trace
 
 	cmp	scno, #NR_syscalls		@ check upper syscall limit
-	adr	lr, ret_fast_syscall		@ return address
+	adr	lr, BSYM(ret_fast_syscall)	@ return address
 	ldrcc	pc, [tbl, scno, lsl #2]		@ call sys_* routine
 
 	add	r1, sp, #S_OFF
@@ -293,7 +281,7 @@ __sys_trace:
 	mov	r0, #0				@ trace entry [IP = 0]
 	bl	syscall_trace
 
-	adr	lr, __sys_trace_return		@ return address
+	adr	lr, BSYM(__sys_trace_return)	@ return address
 	mov	scno, r0			@ syscall number (possibly new)
 	add	r1, sp, #S_R0 + S_OFF		@ pointer to regs
 	cmp	scno, #NR_syscalls		@ check upper syscall limit
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index 87ab4e15799..a4eaf4f920c 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -36,11 +36,6 @@
 #endif
 	.endm
 
-	.macro	get_thread_info, rd
-	mov	\rd, sp, lsr #13
-	mov	\rd, \rd, lsl #13
-	.endm
-
 	.macro	alignment_trap, rtemp
 #ifdef CONFIG_ALIGNMENT_TRAP
 	ldr	\rtemp, .LCcralign
@@ -49,6 +44,93 @@
 #endif
 	.endm
 
+	@
+	@ Store/load the USER SP and LR registers by switching to the SYS
+	@ mode. Useful in Thumb-2 mode where "stm/ldm rd, {sp, lr}^" is not
+	@ available. Should only be called from SVC mode
+	@
+	.macro	store_user_sp_lr, rd, rtemp, offset = 0
+	mrs	\rtemp, cpsr
+	eor	\rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
+	msr	cpsr_c, \rtemp			@ switch to the SYS mode
+
+	str	sp, [\rd, #\offset]		@ save sp_usr
+	str	lr, [\rd, #\offset + 4]		@ save lr_usr
+
+	eor	\rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
+	msr	cpsr_c, \rtemp			@ switch back to the SVC mode
+	.endm
+
+	.macro	load_user_sp_lr, rd, rtemp, offset = 0
+	mrs	\rtemp, cpsr
+	eor	\rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
+	msr	cpsr_c, \rtemp			@ switch to the SYS mode
+
+	ldr	sp, [\rd, #\offset]		@ load sp_usr
+	ldr	lr, [\rd, #\offset + 4]		@ load lr_usr
+
+	eor	\rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
+	msr	cpsr_c, \rtemp			@ switch back to the SVC mode
+	.endm
+
+#ifndef CONFIG_THUMB2_KERNEL
+	.macro	svc_exit, rpsr
+	msr	spsr_cxsf, \rpsr
+	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+	.endm
+
+	.macro	restore_user_regs, fast = 0, offset = 0
+	ldr	r1, [sp, #\offset + S_PSR]	@ get calling cpsr
+	ldr	lr, [sp, #\offset + S_PC]!	@ get pc
+	msr	spsr_cxsf, r1			@ save in spsr_svc
+	.if	\fast
+	ldmdb	sp, {r1 - lr}^			@ get calling r1 - lr
+	.else
+	ldmdb	sp, {r0 - lr}^			@ get calling r0 - lr
+	.endif
+	add	sp, sp, #S_FRAME_SIZE - S_PC
+	movs	pc, lr				@ return & move spsr_svc into cpsr
+	.endm
+
+	.macro	get_thread_info, rd
+	mov	\rd, sp, lsr #13
+	mov	\rd, \rd, lsl #13
+	.endm
+#else	/* CONFIG_THUMB2_KERNEL */
+	.macro	svc_exit, rpsr
+	ldr	r0, [sp, #S_SP]			@ top of the stack
+	ldr	r1, [sp, #S_PC]			@ return address
+	tst	r0, #4				@ orig stack 8-byte aligned?
+	stmdb	r0, {r1, \rpsr}			@ rfe context
+	ldmia	sp, {r0 - r12}
+	ldr	lr, [sp, #S_LR]
+	addeq	sp, sp, #S_FRAME_SIZE - 8	@ aligned
+	addne	sp, sp, #S_FRAME_SIZE - 4	@ not aligned
+	rfeia	sp!
+	.endm
+
+	.macro	restore_user_regs, fast = 0, offset = 0
+	mov	r2, sp
+	load_user_sp_lr r2, r3, \offset + S_SP	@ calling sp, lr
+	ldr	r1, [sp, #\offset + S_PSR]	@ get calling cpsr
+	ldr	lr, [sp, #\offset + S_PC]	@ get pc
+	add	sp, sp, #\offset + S_SP
+	msr	spsr_cxsf, r1			@ save in spsr_svc
+	.if	\fast
+	ldmdb	sp, {r1 - r12}			@ get calling r1 - r12
+	.else
+	ldmdb	sp, {r0 - r12}			@ get calling r0 - r12
+	.endif
+	add	sp, sp, #S_FRAME_SIZE - S_SP
+	movs	pc, lr				@ return & move spsr_svc into cpsr
+	.endm
+
+	.macro	get_thread_info, rd
+	mov	\rd, sp
+	lsr	\rd, \rd, #13
+	mov	\rd, \rd, lsl #13
+	.endm
+#endif	/* !CONFIG_THUMB2_KERNEL */
 
 /*
  * These are the registers used in the syscall handler, and allow us to
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index dbfaef07a1f..93ad576b2d7 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -52,7 +52,9 @@ __mmap_switched:
 	strcc	fp, [r6],#4
 	bcc	1b
 
-	ldmia	r3, {r4, r5, r6, r7, sp}
+ ARM(	ldmia	r3, {r4, r5, r6, r7, sp})
+ THUMB(	ldmia	r3, {r4, r5, r6, r7}	)
+ THUMB(	ldr	sp, [r3, #16]		)
 	str	r9, [r4]			@ Save processor ID
 	str	r1, [r5]			@ Save machine type
 	str	r2, [r6]			@ Save atags pointer
@@ -156,7 +158,8 @@ ENDPROC(__error)
  */
 __lookup_processor_type:
 	adr	r3, 3f
-	ldmda	r3, {r5 - r7}
+	ldmia	r3, {r5 - r7}
+	add	r3, r3, #8
 	sub	r3, r3, r7			@ get offset between virt&phys
 	add	r5, r5, r3			@ convert virt addresses to
 	add	r6, r6, r3			@ physical address space
@@ -187,9 +190,9 @@ ENDPROC(lookup_processor_type)
  * more information about the __proc_info and __arch_info structures.
  */
 	.align	2
-	.long	__proc_info_begin
+3:	.long	__proc_info_begin
 	.long	__proc_info_end
-3:	.long	.
+4:	.long	.
 	.long	__arch_info_begin
 	.long	__arch_info_end
 
@@ -205,7 +208,7 @@ ENDPROC(lookup_processor_type)
  *  r5 = mach_info pointer in physical address space
  */
 __lookup_machine_type:
-	adr	r3, 3b
+	adr	r3, 4b
 	ldmia	r3, {r4, r5, r6}
 	sub	r3, r3, r4			@ get offset between virt&phys
 	add	r5, r5, r3			@ convert virt addresses to
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index cc87e1765ed..b16393d2b71 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -34,7 +34,7 @@
  */
 	.section ".text.head", "ax"
 ENTRY(stext)
-	msr	cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode
+	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
 						@ and irqs disabled
 #ifndef CONFIG_CPU_CP15
 	ldr	r9, =CONFIG_PROCESSOR_ID
@@ -50,8 +50,10 @@ ENTRY(stext)
 
 	ldr	r13, __switch_data		@ address to jump to after
 						@ the initialization is done
-	adr	lr, __after_proc_init		@ return (PIC) address
-	add	pc, r10, #PROCINFO_INITFUNC
+	adr	lr, BSYM(__after_proc_init)	@ return (PIC) address
+ ARM(	add	pc, r10, #PROCINFO_INITFUNC	)
+ THUMB(	add	r12, r10, #PROCINFO_INITFUNC	)
+ THUMB(	mov	pc, r12				)
 ENDPROC(stext)
 
 /*
@@ -82,7 +84,8 @@ __after_proc_init:
 	mcr	p15, 0, r0, c1, c0, 0		@ write control reg
 #endif /* CONFIG_CPU_CP15 */
 
-	mov	pc, r13				@ clear the BSS and jump
+	mov	r3, r13
+	mov	pc, r3				@ clear the BSS and jump
 						@ to start_kernel
 ENDPROC(__after_proc_init)
 	.ltorg
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 21e17dc94cb..38ccbe1d3b2 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -76,7 +76,7 @@
  */
 	.section ".text.head", "ax"
 ENTRY(stext)
-	msr	cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode
+	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
 						@ and irqs disabled
 	mrc	p15, 0, r9, c0, c0		@ get processor id
 	bl	__lookup_processor_type		@ r5=procinfo r9=cpuid
@@ -97,8 +97,10 @@ ENTRY(stext)
 	 */
 	ldr	r13, __switch_data		@ address to jump to after
 						@ mmu has been enabled
-	adr	lr, __enable_mmu		@ return (PIC) address
-	add	pc, r10, #PROCINFO_INITFUNC
+	adr	lr, BSYM(__enable_mmu)		@ return (PIC) address
+ ARM(	add	pc, r10, #PROCINFO_INITFUNC	)
+ THUMB(	add	r12, r10, #PROCINFO_INITFUNC	)
+ THUMB(	mov	pc, r12				)
 ENDPROC(stext)
 
 #if defined(CONFIG_SMP)
@@ -110,7 +112,7 @@ ENTRY(secondary_startup)
 	 * the processor type - there is no need to check the machine type
 	 * as it has already been validated by the primary processor.
 	 */
-	msr	cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9
 	mrc	p15, 0, r9, c0, c0		@ get processor id
 	bl	__lookup_processor_type
 	movs	r10, r5				@ invalid processor?
@@ -121,12 +123,15 @@ ENTRY(secondary_startup)
 	 * Use the page tables supplied from  __cpu_up.
 	 */
 	adr	r4, __secondary_data
-	ldmia	r4, {r5, r7, r13}		@ address to jump to after
+	ldmia	r4, {r5, r7, r12}		@ address to jump to after
 	sub	r4, r4, r5			@ mmu has been enabled
 	ldr	r4, [r7, r4]			@ get secondary_data.pgdir
-	adr	lr, __enable_mmu		@ return address
-	add	pc, r10, #PROCINFO_INITFUNC	@ initialise processor
-						@ (return control reg)
+	adr	lr, BSYM(__enable_mmu)		@ return address
+	mov	r13, r12			@ __secondary_switched address
+ ARM(	add	pc, r10, #PROCINFO_INITFUNC	) @ initialise processor
+						  @ (return control reg)
+ THUMB(	add	r12, r10, #PROCINFO_INITFUNC	)
+ THUMB(	mov	pc, r12				)
 ENDPROC(secondary_startup)
 
 	/*
@@ -193,8 +198,8 @@ __turn_mmu_on:
 	mcr	p15, 0, r0, c1, c0, 0		@ write control reg
 	mrc	p15, 0, r3, c0, c0, 0		@ read id reg
 	mov	r3, r3
-	mov	r3, r3
-	mov	pc, r13
+	mov	r3, r13
+	mov	pc, r3
 ENDPROC(__turn_mmu_on)
 
 
@@ -235,7 +240,8 @@ __create_page_tables:
 	 * will be removed by paging_init().  We use our current program
 	 * counter to determine corresponding section base address.
 	 */
-	mov	r6, pc, lsr #20			@ start of kernel section
+	mov	r6, pc
+	mov	r6, r6, lsr #20			@ start of kernel section
 	orr	r3, r7, r6, lsl #20		@ flags + kernel base
 	str	r3, [r4, r6, lsl #2]		@ identity mapping
 
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 39196dff478..790fbee92ec 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -388,7 +388,7 @@ pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
 	regs.ARM_r2 = (unsigned long)fn;
 	regs.ARM_r3 = (unsigned long)kernel_thread_exit;
 	regs.ARM_pc = (unsigned long)kernel_thread_helper;
-	regs.ARM_cpsr = SVC_MODE | PSR_ENDSTATE;
+	regs.ARM_cpsr = SVC_MODE | PSR_ENDSTATE | PSR_ISETSTATE;
 
 	return do_fork(flags|CLONE_VM|CLONE_UNTRACED, 0, &regs, 0, NULL, NULL);
 }
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index bc5e4128f9f..d4d4f77c91b 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -25,6 +25,7 @@
 #include <linux/smp.h>
 #include <linux/fs.h>
 
+#include <asm/unified.h>
 #include <asm/cpu.h>
 #include <asm/cputype.h>
 #include <asm/elf.h>
@@ -326,26 +327,39 @@ void cpu_init(void)
 		BUG();
 	}
 
+	/*
+	 * Define the placement constraint for the inline asm directive below.
+	 * In Thumb-2, msr with an immediate value is not allowed.
+	 */
+#ifdef CONFIG_THUMB2_KERNEL
+#define PLC	"r"
+#else
+#define PLC	"I"
+#endif
+
 	/*
 	 * setup stacks for re-entrant exception handlers
 	 */
 	__asm__ (
 	"msr	cpsr_c, %1\n\t"
-	"add	sp, %0, %2\n\t"
+	"add	r14, %0, %2\n\t"
+	"mov	sp, r14\n\t"
 	"msr	cpsr_c, %3\n\t"
-	"add	sp, %0, %4\n\t"
+	"add	r14, %0, %4\n\t"
+	"mov	sp, r14\n\t"
 	"msr	cpsr_c, %5\n\t"
-	"add	sp, %0, %6\n\t"
+	"add	r14, %0, %6\n\t"
+	"mov	sp, r14\n\t"
 	"msr	cpsr_c, %7"
 	    :
 	    : "r" (stk),
-	      "I" (PSR_F_BIT | PSR_I_BIT | IRQ_MODE),
+	      PLC (PSR_F_BIT | PSR_I_BIT | IRQ_MODE),
 	      "I" (offsetof(struct stack, irq[0])),
-	      "I" (PSR_F_BIT | PSR_I_BIT | ABT_MODE),
+	      PLC (PSR_F_BIT | PSR_I_BIT | ABT_MODE),
 	      "I" (offsetof(struct stack, abt[0])),
-	      "I" (PSR_F_BIT | PSR_I_BIT | UND_MODE),
+	      PLC (PSR_F_BIT | PSR_I_BIT | UND_MODE),
 	      "I" (offsetof(struct stack, und[0])),
-	      "I" (PSR_F_BIT | PSR_I_BIT | SVC_MODE)
+	      PLC (PSR_F_BIT | PSR_I_BIT | SVC_MODE)
 	    : "r14");
 }
 
diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
index dd56e11f339..39baf1128bf 100644
--- a/arch/arm/kernel/unwind.c
+++ b/arch/arm/kernel/unwind.c
@@ -62,7 +62,11 @@ struct unwind_ctrl_block {
 };
 
 enum regs {
+#ifdef CONFIG_THUMB2_KERNEL
+	FP = 7,
+#else
 	FP = 11,
+#endif
 	SP = 13,
 	LR = 14,
 	PC = 15
-- 
cgit v1.2.3


From 347c8b70b1d5256e445e54e736f88d21877616cf Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:32:56 +0100
Subject: Thumb-2: Implement the unified arch/arm/mm support

This patch adds the ARM/Thumb-2 unified support to the arch/arm/mm/*
files.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mm/alignment.c | 20 +++++++++++++++-----
 arch/arm/mm/cache-v7.S  | 16 +++++++++++-----
 arch/arm/mm/proc-v7.S   |  5 ++++-
 3 files changed, 30 insertions(+), 11 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index 03cd27d917b..b270d6228fe 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -159,7 +159,9 @@ union offset_union {
 
 #define __get8_unaligned_check(ins,val,addr,err)	\
 	__asm__(					\
-	"1:	"ins"	%1, [%2], #1\n"			\
+ ARM(	"1:	"ins"	%1, [%2], #1\n"	)		\
+ THUMB(	"1:	"ins"	%1, [%2]\n"	)		\
+ THUMB(	"	add	%2, %2, #1\n"	)		\
 	"2:\n"						\
 	"	.section .fixup,\"ax\"\n"		\
 	"	.align	2\n"				\
@@ -215,7 +217,9 @@ union offset_union {
 	do {							\
 		unsigned int err = 0, v = val, a = addr;	\
 		__asm__( FIRST_BYTE_16				\
-		"1:	"ins"	%1, [%2], #1\n"			\
+	 ARM(	"1:	"ins"	%1, [%2], #1\n"	)		\
+	 THUMB(	"1:	"ins"	%1, [%2]\n"	)		\
+	 THUMB(	"	add	%2, %2, #1\n"	)		\
 		"	mov	%1, %1, "NEXT_BYTE"\n"		\
 		"2:	"ins"	%1, [%2]\n"			\
 		"3:\n"						\
@@ -245,11 +249,17 @@ union offset_union {
 	do {							\
 		unsigned int err = 0, v = val, a = addr;	\
 		__asm__( FIRST_BYTE_32				\
-		"1:	"ins"	%1, [%2], #1\n"			\
+	 ARM(	"1:	"ins"	%1, [%2], #1\n"	)		\
+	 THUMB(	"1:	"ins"	%1, [%2]\n"	)		\
+	 THUMB(	"	add	%2, %2, #1\n"	)		\
 		"	mov	%1, %1, "NEXT_BYTE"\n"		\
-		"2:	"ins"	%1, [%2], #1\n"			\
+	 ARM(	"2:	"ins"	%1, [%2], #1\n"	)		\
+	 THUMB(	"2:	"ins"	%1, [%2]\n"	)		\
+	 THUMB(	"	add	%2, %2, #1\n"	)		\
 		"	mov	%1, %1, "NEXT_BYTE"\n"		\
-		"3:	"ins"	%1, [%2], #1\n"			\
+	 ARM(	"3:	"ins"	%1, [%2], #1\n"	)		\
+	 THUMB(	"3:	"ins"	%1, [%2]\n"	)		\
+	 THUMB(	"	add	%2, %2, #1\n"	)		\
 		"	mov	%1, %1, "NEXT_BYTE"\n"		\
 		"4:	"ins"	%1, [%2]\n"			\
 		"5:\n"						\
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index be93ff02a98..bda0ec31a4e 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -21,7 +21,7 @@
  *
  *	Flush the whole D-cache.
  *
- *	Corrupted registers: r0-r5, r7, r9-r11
+ *	Corrupted registers: r0-r7, r9-r11 (r6 only in Thumb mode)
  *
  *	- mm    - mm_struct describing address space
  */
@@ -51,8 +51,12 @@ loop1:
 loop2:
 	mov	r9, r4				@ create working copy of max way size
 loop3:
-	orr	r11, r10, r9, lsl r5		@ factor way and cache number into r11
-	orr	r11, r11, r7, lsl r2		@ factor index number into r11
+ ARM(	orr	r11, r10, r9, lsl r5	)	@ factor way and cache number into r11
+ THUMB(	lsl	r6, r9, r5		)
+ THUMB(	orr	r11, r10, r6		)	@ factor way and cache number into r11
+ ARM(	orr	r11, r11, r7, lsl r2	)	@ factor index number into r11
+ THUMB(	lsl	r6, r7, r2		)
+ THUMB(	orr	r11, r11, r6		)	@ factor index number into r11
 	mcr	p15, 0, r11, c7, c14, 2		@ clean & invalidate by set/way
 	subs	r9, r9, #1			@ decrement the way
 	bge	loop3
@@ -82,11 +86,13 @@ ENDPROC(v7_flush_dcache_all)
  *
  */
 ENTRY(v7_flush_kern_cache_all)
-	stmfd	sp!, {r4-r5, r7, r9-r11, lr}
+ ARM(	stmfd	sp!, {r4-r5, r7, r9-r11, lr}	)
+ THUMB(	stmfd	sp!, {r4-r7, r9-r11, lr}	)
 	bl	v7_flush_dcache_all
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c5, 0		@ I+BTB cache invalidate
-	ldmfd	sp!, {r4-r5, r7, r9-r11, lr}
+ ARM(	ldmfd	sp!, {r4-r5, r7, r9-r11, lr}	)
+ THUMB(	ldmfd	sp!, {r4-r7, r9-r11, lr}	)
 	mov	pc, lr
 ENDPROC(v7_flush_kern_cache_all)
 
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 180a08d03a0..c19aecdb202 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -127,7 +127,9 @@ ENDPROC(cpu_v7_switch_mm)
  */
 ENTRY(cpu_v7_set_pte_ext)
 #ifdef CONFIG_MMU
-	str	r1, [r0], #-2048		@ linux version
+ ARM(	str	r1, [r0], #-2048	)	@ linux version
+ THUMB(	str	r1, [r0]		)	@ linux version
+ THUMB(	sub	r0, r0, #2048		)
 
 	bic	r3, r1, #0x000003f0
 	bic	r3, r3, #PTE_TYPE_MASK
@@ -273,6 +275,7 @@ __v7_setup:
    	mrc	p15, 0, r0, c1, c0, 0		@ read control register
 	bic	r0, r0, r5			@ clear bits them
 	orr	r0, r0, r6			@ set them
+ THUMB(	orr	r0, r0, #1 << 30	)	@ Thumb exceptions
 	mov	pc, lr				@ return to head.S:__ret
 ENDPROC(__v7_setup)
 
-- 
cgit v1.2.3


From 8b592783a2e8b7721a99730bd549aab5208f36af Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:32:57 +0100
Subject: Thumb-2: Implement the unified arch/arm/lib functions

This patch adds the ARM/Thumb-2 unified support for the arch/arm/lib/*
files.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/include/asm/assembler.h   | 73 ++++++++++++++++++++++++++++++++++++++
 arch/arm/include/asm/uaccess.h     |  7 ++--
 arch/arm/lib/ashldi3.S             |  4 ++-
 arch/arm/lib/ashrdi3.S             |  4 ++-
 arch/arm/lib/backtrace.S           |  8 +++--
 arch/arm/lib/clear_user.S          | 15 ++++----
 arch/arm/lib/copy_from_user.S      | 19 +++++-----
 arch/arm/lib/copy_template.S       | 24 +++++++++++--
 arch/arm/lib/copy_to_user.S        | 19 +++++-----
 arch/arm/lib/csumpartialcopyuser.S | 48 +++++++------------------
 arch/arm/lib/div64.S               |  4 ++-
 arch/arm/lib/findbit.S             | 34 +++++++++++++-----
 arch/arm/lib/getuser.S             |  5 +++
 arch/arm/lib/io-writesw-armv4.S    |  5 ++-
 arch/arm/lib/lshrdi3.S             |  4 ++-
 arch/arm/lib/memcpy.S              |  7 ++--
 arch/arm/lib/memmove.S             | 28 +++++++--------
 arch/arm/lib/putuser.S             | 15 ++++++++
 arch/arm/lib/strncpy_from_user.S   |  2 +-
 arch/arm/lib/strnlen_user.S        |  2 +-
 20 files changed, 229 insertions(+), 98 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 1acd1da36d0..2b60c7d0577 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -138,3 +138,76 @@
 	msr	cpsr_c, #\mode
 	.endm
 #endif
+
+/*
+ * STRT/LDRT access macros with ARM and Thumb-2 variants
+ */
+#ifdef CONFIG_THUMB2_KERNEL
+
+	.macro	usraccoff, instr, reg, ptr, inc, off, cond, abort
+9999:
+	.if	\inc == 1
+	\instr\cond\()bt \reg, [\ptr, #\off]
+	.elseif	\inc == 4
+	\instr\cond\()t \reg, [\ptr, #\off]
+	.else
+	.error	"Unsupported inc macro argument"
+	.endif
+
+	.section __ex_table,"a"
+	.align	3
+	.long	9999b, \abort
+	.previous
+	.endm
+
+	.macro	usracc, instr, reg, ptr, inc, cond, rept, abort
+	@ explicit IT instruction needed because of the label
+	@ introduced by the USER macro
+	.ifnc	\cond,al
+	.if	\rept == 1
+	itt	\cond
+	.elseif	\rept == 2
+	ittt	\cond
+	.else
+	.error	"Unsupported rept macro argument"
+	.endif
+	.endif
+
+	@ Slightly optimised to avoid incrementing the pointer twice
+	usraccoff \instr, \reg, \ptr, \inc, 0, \cond, \abort
+	.if	\rept == 2
+	usraccoff \instr, \reg, \ptr, \inc, 4, \cond, \abort
+	.endif
+
+	add\cond \ptr, #\rept * \inc
+	.endm
+
+#else	/* !CONFIG_THUMB2_KERNEL */
+
+	.macro	usracc, instr, reg, ptr, inc, cond, rept, abort
+	.rept	\rept
+9999:
+	.if	\inc == 1
+	\instr\cond\()bt \reg, [\ptr], #\inc
+	.elseif	\inc == 4
+	\instr\cond\()t \reg, [\ptr], #\inc
+	.else
+	.error	"Unsupported inc macro argument"
+	.endif
+
+	.section __ex_table,"a"
+	.align	3
+	.long	9999b, \abort
+	.previous
+	.endr
+	.endm
+
+#endif	/* CONFIG_THUMB2_KERNEL */
+
+	.macro	strusr, reg, ptr, inc, cond=al, rept=1, abort=9001f
+	usracc	str, \reg, \ptr, \inc, \cond, \rept, \abort
+	.endm
+
+	.macro	ldrusr, reg, ptr, inc, cond=al, rept=1, abort=9001f
+	usracc	ldr, \reg, \ptr, \inc, \cond, \rept, \abort
+	.endm
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index 0da9bc9b3b1..1d6bd40a432 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -17,6 +17,7 @@
 #include <asm/memory.h>
 #include <asm/domain.h>
 #include <asm/system.h>
+#include <asm/unified.h>
 
 #define VERIFY_READ 0
 #define VERIFY_WRITE 1
@@ -365,8 +366,10 @@ do {									\
 
 #define __put_user_asm_dword(x,__pu_addr,err)			\
 	__asm__ __volatile__(					\
-	"1:	strt	" __reg_oper1 ", [%1], #4\n"		\
-	"2:	strt	" __reg_oper0 ", [%1]\n"		\
+ ARM(	"1:	strt	" __reg_oper1 ", [%1], #4\n"	)	\
+ ARM(	"2:	strt	" __reg_oper0 ", [%1]\n"	)	\
+ THUMB(	"1:	strt	" __reg_oper1 ", [%1]\n"	)	\
+ THUMB(	"2:	strt	" __reg_oper0 ", [%1, #4]\n"	)	\
 	"3:\n"							\
 	"	.section .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
diff --git a/arch/arm/lib/ashldi3.S b/arch/arm/lib/ashldi3.S
index 1154d924080..638deb13da1 100644
--- a/arch/arm/lib/ashldi3.S
+++ b/arch/arm/lib/ashldi3.S
@@ -43,7 +43,9 @@ ENTRY(__aeabi_llsl)
 	rsb	ip, r2, #32
 	movmi	ah, ah, lsl r2
 	movpl	ah, al, lsl r3
-	orrmi	ah, ah, al, lsr ip
+ ARM(	orrmi	ah, ah, al, lsr ip	)
+ THUMB(	lsrmi	r3, al, ip		)
+ THUMB(	orrmi	ah, ah, r3		)
 	mov	al, al, lsl r2
 	mov	pc, lr
 
diff --git a/arch/arm/lib/ashrdi3.S b/arch/arm/lib/ashrdi3.S
index 9f8b35572f8..015e8aa5a1d 100644
--- a/arch/arm/lib/ashrdi3.S
+++ b/arch/arm/lib/ashrdi3.S
@@ -43,7 +43,9 @@ ENTRY(__aeabi_lasr)
 	rsb	ip, r2, #32
 	movmi	al, al, lsr r2
 	movpl	al, ah, asr r3
-	orrmi	al, al, ah, lsl ip
+ ARM(	orrmi	al, al, ah, lsl ip	)
+ THUMB(	lslmi	r3, ah, ip		)
+ THUMB(	orrmi	al, al, r3		)
 	mov	ah, ah, asr r2
 	mov	pc, lr
 
diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S
index b0951d0e8b2..aaf7220d9e3 100644
--- a/arch/arm/lib/backtrace.S
+++ b/arch/arm/lib/backtrace.S
@@ -38,7 +38,9 @@ ENDPROC(c_backtrace)
 		beq	no_frame		@ we have no stack frames
 
 		tst	r1, #0x10		@ 26 or 32-bit mode?
-		moveq	mask, #0xfc000003	@ mask for 26-bit
+ ARM(		moveq	mask, #0xfc000003	)
+ THUMB(		moveq	mask, #0xfc000000	)
+ THUMB(		orreq	mask, #0x03		)
 		movne	mask, #0		@ mask for 32-bit
 
 1:		stmfd	sp!, {pc}		@ calculate offset of PC stored
@@ -126,7 +128,9 @@ ENDPROC(c_backtrace)
 		mov	reg, #10
 		mov	r7, #0
 1:		mov	r3, #1
-		tst	instr, r3, lsl reg
+ ARM(		tst	instr, r3, lsl reg	)
+ THUMB(		lsl	r3, reg			)
+ THUMB(		tst	instr, r3		)
 		beq	2f
 		add	r7, r7, #1
 		teq	r7, #6
diff --git a/arch/arm/lib/clear_user.S b/arch/arm/lib/clear_user.S
index 844f56785eb..1279abd8b88 100644
--- a/arch/arm/lib/clear_user.S
+++ b/arch/arm/lib/clear_user.S
@@ -27,21 +27,20 @@ WEAK(__clear_user)
 		ands	ip, r0, #3
 		beq	1f
 		cmp	ip, #2
-USER(		strbt	r2, [r0], #1)
-USER(		strlebt	r2, [r0], #1)
-USER(		strltbt	r2, [r0], #1)
+		strusr	r2, r0, 1
+		strusr	r2, r0, 1, le
+		strusr	r2, r0, 1, lt
 		rsb	ip, ip, #4
 		sub	r1, r1, ip		@  7  6  5  4  3  2  1
 1:		subs	r1, r1, #8		@ -1 -2 -3 -4 -5 -6 -7
-USER(		strplt	r2, [r0], #4)
-USER(		strplt	r2, [r0], #4)
+		strusr	r2, r0, 4, pl, rept=2
 		bpl	1b
 		adds	r1, r1, #4		@  3  2  1  0 -1 -2 -3
-USER(		strplt	r2, [r0], #4)
+		strusr	r2, r0, 4, pl
 2:		tst	r1, #2			@ 1x 1x 0x 0x 1x 1x 0x
-USER(		strnebt	r2, [r0], #1)
-USER(		strnebt	r2, [r0], #1)
+		strusr	r2, r0, 1, ne, rept=2
 		tst	r1, #1			@ x1 x0 x1 x0 x1 x0 x1
+		it	ne			@ explicit IT needed for the label
 USER(		strnebt	r2, [r0])
 		mov	r0, #0
 		ldmfd	sp!, {r1, pc}
diff --git a/arch/arm/lib/copy_from_user.S b/arch/arm/lib/copy_from_user.S
index 56799a165cc..e4fe124aced 100644
--- a/arch/arm/lib/copy_from_user.S
+++ b/arch/arm/lib/copy_from_user.S
@@ -33,11 +33,15 @@
  *	Number of bytes NOT copied.
  */
 
+#ifndef CONFIG_THUMB2_KERNEL
+#define LDR1W_SHIFT	0
+#else
+#define LDR1W_SHIFT	1
+#endif
+#define STR1W_SHIFT	0
+
 	.macro ldr1w ptr reg abort
-100:	ldrt \reg, [\ptr], #4
-	.section __ex_table, "a"
-	.long 100b, \abort
-	.previous
+	ldrusr	\reg, \ptr, 4, abort=\abort
 	.endm
 
 	.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
@@ -53,14 +57,11 @@
 	.endm
 
 	.macro ldr1b ptr reg cond=al abort
-100:	ldr\cond\()bt \reg, [\ptr], #1
-	.section __ex_table, "a"
-	.long 100b, \abort
-	.previous
+	ldrusr	\reg, \ptr, 1, \cond, abort=\abort
 	.endm
 
 	.macro str1w ptr reg abort
-	str \reg, [\ptr], #4
+	W(str) \reg, [\ptr], #4
 	.endm
 
 	.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
diff --git a/arch/arm/lib/copy_template.S b/arch/arm/lib/copy_template.S
index 139cce64605..805e3f8fb00 100644
--- a/arch/arm/lib/copy_template.S
+++ b/arch/arm/lib/copy_template.S
@@ -57,6 +57,13 @@
  *
  *	Restore registers with the values previously saved with the
  *	'preserv' macro. Called upon code termination.
+ *
+ * LDR1W_SHIFT
+ * STR1W_SHIFT
+ *
+ *	Correction to be applied to the "ip" register when branching into
+ *	the ldr1w or str1w instructions (some of these macros may expand to
+ *	than one 32bit instruction in Thumb-2)
  */
 
 
@@ -99,9 +106,15 @@
 
 5:		ands	ip, r2, #28
 		rsb	ip, ip, #32
+#if LDR1W_SHIFT > 0
+		lsl	ip, ip, #LDR1W_SHIFT
+#endif
 		addne	pc, pc, ip		@ C is always clear here
 		b	7f
-6:		nop
+6:
+		.rept	(1 << LDR1W_SHIFT)
+		W(nop)
+		.endr
 		ldr1w	r1, r3, abort=20f
 		ldr1w	r1, r4, abort=20f
 		ldr1w	r1, r5, abort=20f
@@ -110,9 +123,16 @@
 		ldr1w	r1, r8, abort=20f
 		ldr1w	r1, lr, abort=20f
 
+#if LDR1W_SHIFT < STR1W_SHIFT
+		lsl	ip, ip, #STR1W_SHIFT - LDR1W_SHIFT
+#elif LDR1W_SHIFT > STR1W_SHIFT
+		lsr	ip, ip, #LDR1W_SHIFT - STR1W_SHIFT
+#endif
 		add	pc, pc, ip
 		nop
-		nop
+		.rept	(1 << STR1W_SHIFT)
+		W(nop)
+		.endr
 		str1w	r0, r3, abort=20f
 		str1w	r0, r4, abort=20f
 		str1w	r0, r5, abort=20f
diff --git a/arch/arm/lib/copy_to_user.S b/arch/arm/lib/copy_to_user.S
index 878820f0a32..1a71e158444 100644
--- a/arch/arm/lib/copy_to_user.S
+++ b/arch/arm/lib/copy_to_user.S
@@ -33,8 +33,15 @@
  *	Number of bytes NOT copied.
  */
 
+#define LDR1W_SHIFT	0
+#ifndef CONFIG_THUMB2_KERNEL
+#define STR1W_SHIFT	0
+#else
+#define STR1W_SHIFT	1
+#endif
+
 	.macro ldr1w ptr reg abort
-	ldr \reg, [\ptr], #4
+	W(ldr) \reg, [\ptr], #4
 	.endm
 
 	.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
@@ -50,10 +57,7 @@
 	.endm
 
 	.macro str1w ptr reg abort
-100:	strt \reg, [\ptr], #4
-	.section __ex_table, "a"
-	.long 100b, \abort
-	.previous
+	strusr	\reg, \ptr, 4, abort=\abort
 	.endm
 
 	.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
@@ -68,10 +72,7 @@
 	.endm
 
 	.macro str1b ptr reg cond=al abort
-100:	str\cond\()bt \reg, [\ptr], #1
-	.section __ex_table, "a"
-	.long 100b, \abort
-	.previous
+	strusr	\reg, \ptr, 1, \cond, abort=\abort
 	.endm
 
 	.macro enter reg1 reg2
diff --git a/arch/arm/lib/csumpartialcopyuser.S b/arch/arm/lib/csumpartialcopyuser.S
index 14677fb4b0c..fd0e9dcd9fd 100644
--- a/arch/arm/lib/csumpartialcopyuser.S
+++ b/arch/arm/lib/csumpartialcopyuser.S
@@ -26,50 +26,28 @@
 		.endm
 
 		.macro	load1b,	reg1
-9999:		ldrbt	\reg1, [r0], $1
-		.section __ex_table, "a"
-		.align	3
-		.long	9999b, 6001f
-		.previous
+		ldrusr	\reg1, r0, 1
 		.endm
 
 		.macro	load2b, reg1, reg2
-9999:		ldrbt	\reg1, [r0], $1
-9998:		ldrbt	\reg2, [r0], $1
-		.section __ex_table, "a"
-		.long	9999b, 6001f
-		.long	9998b, 6001f
-		.previous
+		ldrusr	\reg1, r0, 1
+		ldrusr	\reg2, r0, 1
 		.endm
 
 		.macro	load1l, reg1
-9999:		ldrt	\reg1, [r0], $4
-		.section __ex_table, "a"
-		.align	3
-		.long	9999b, 6001f
-		.previous
+		ldrusr	\reg1, r0, 4
 		.endm
 
 		.macro	load2l, reg1, reg2
-9999:		ldrt	\reg1, [r0], $4
-9998:		ldrt	\reg2, [r0], $4
-		.section __ex_table, "a"
-		.long	9999b, 6001f
-		.long	9998b, 6001f
-		.previous
+		ldrusr	\reg1, r0, 4
+		ldrusr	\reg2, r0, 4
 		.endm
 
 		.macro	load4l, reg1, reg2, reg3, reg4
-9999:		ldrt	\reg1, [r0], $4
-9998:		ldrt	\reg2, [r0], $4
-9997:		ldrt	\reg3, [r0], $4
-9996:		ldrt	\reg4, [r0], $4
-		.section __ex_table, "a"
-		.long	9999b, 6001f
-		.long	9998b, 6001f
-		.long	9997b, 6001f
-		.long	9996b, 6001f
-		.previous
+		ldrusr	\reg1, r0, 4
+		ldrusr	\reg2, r0, 4
+		ldrusr	\reg3, r0, 4
+		ldrusr	\reg4, r0, 4
 		.endm
 
 /*
@@ -92,14 +70,14 @@
  */
 		.section .fixup,"ax"
 		.align	4
-6001:		mov	r4, #-EFAULT
+9001:		mov	r4, #-EFAULT
 		ldr	r5, [fp, #4]		@ *err_ptr
 		str	r4, [r5]
 		ldmia	sp, {r1, r2}		@ retrieve dst, len
 		add	r2, r2, r1
 		mov	r0, #0			@ zero the buffer
-6002:		teq	r2, r1
+9002:		teq	r2, r1
 		strneb	r0, [r1], #1
-		bne	6002b
+		bne	9002b
 		load_regs
 		.previous
diff --git a/arch/arm/lib/div64.S b/arch/arm/lib/div64.S
index 1425e789ba8..faa7748142d 100644
--- a/arch/arm/lib/div64.S
+++ b/arch/arm/lib/div64.S
@@ -177,7 +177,9 @@ ENTRY(__do_div64)
 	mov	yh, xh, lsr ip
 	mov	yl, xl, lsr ip
 	rsb	ip, ip, #32
-	orr	yl, yl, xh, lsl ip
+ ARM(	orr	yl, yl, xh, lsl ip	)
+ THUMB(	lsl	xh, xh, ip		)
+ THUMB(	orr	yl, yl, xh		)
 	mov	xh, xl, lsl ip
 	mov	xh, xh, lsr ip
 	mov	pc, lr
diff --git a/arch/arm/lib/findbit.S b/arch/arm/lib/findbit.S
index 8c4defc4f3c..1e4cbd4e7be 100644
--- a/arch/arm/lib/findbit.S
+++ b/arch/arm/lib/findbit.S
@@ -25,7 +25,10 @@ ENTRY(_find_first_zero_bit_le)
 		teq	r1, #0	
 		beq	3f
 		mov	r2, #0
-1:		ldrb	r3, [r0, r2, lsr #3]
+1:
+ ARM(		ldrb	r3, [r0, r2, lsr #3]	)
+ THUMB(		lsr	r3, r2, #3		)
+ THUMB(		ldrb	r3, [r0, r3]		)
 		eors	r3, r3, #0xff		@ invert bits
 		bne	.L_found		@ any now set - found zero bit
 		add	r2, r2, #8		@ next bit pointer
@@ -44,7 +47,9 @@ ENTRY(_find_next_zero_bit_le)
 		beq	3b
 		ands	ip, r2, #7
 		beq	1b			@ If new byte, goto old routine
-		ldrb	r3, [r0, r2, lsr #3]
+ ARM(		ldrb	r3, [r0, r2, lsr #3]	)
+ THUMB(		lsr	r3, r2, #3		)
+ THUMB(		ldrb	r3, [r0, r3]		)
 		eor	r3, r3, #0xff		@ now looking for a 1 bit
 		movs	r3, r3, lsr ip		@ shift off unused bits
 		bne	.L_found
@@ -61,7 +66,10 @@ ENTRY(_find_first_bit_le)
 		teq	r1, #0	
 		beq	3f
 		mov	r2, #0
-1:		ldrb	r3, [r0, r2, lsr #3]
+1:
+ ARM(		ldrb	r3, [r0, r2, lsr #3]	)
+ THUMB(		lsr	r3, r2, #3		)
+ THUMB(		ldrb	r3, [r0, r3]		)
 		movs	r3, r3
 		bne	.L_found		@ any now set - found zero bit
 		add	r2, r2, #8		@ next bit pointer
@@ -80,7 +88,9 @@ ENTRY(_find_next_bit_le)
 		beq	3b
 		ands	ip, r2, #7
 		beq	1b			@ If new byte, goto old routine
-		ldrb	r3, [r0, r2, lsr #3]
+ ARM(		ldrb	r3, [r0, r2, lsr #3]	)
+ THUMB(		lsr	r3, r2, #3		)
+ THUMB(		ldrb	r3, [r0, r3]		)
 		movs	r3, r3, lsr ip		@ shift off unused bits
 		bne	.L_found
 		orr	r2, r2, #7		@ if zero, then no bits here
@@ -95,7 +105,9 @@ ENTRY(_find_first_zero_bit_be)
 		beq	3f
 		mov	r2, #0
 1:		eor	r3, r2, #0x18		@ big endian byte ordering
-		ldrb	r3, [r0, r3, lsr #3]
+ ARM(		ldrb	r3, [r0, r3, lsr #3]	)
+ THUMB(		lsr	r3, #3			)
+ THUMB(		ldrb	r3, [r0, r3]		)
 		eors	r3, r3, #0xff		@ invert bits
 		bne	.L_found		@ any now set - found zero bit
 		add	r2, r2, #8		@ next bit pointer
@@ -111,7 +123,9 @@ ENTRY(_find_next_zero_bit_be)
 		ands	ip, r2, #7
 		beq	1b			@ If new byte, goto old routine
 		eor	r3, r2, #0x18		@ big endian byte ordering
-		ldrb	r3, [r0, r3, lsr #3]
+ ARM(		ldrb	r3, [r0, r3, lsr #3]	)
+ THUMB(		lsr	r3, #3			)
+ THUMB(		ldrb	r3, [r0, r3]		)
 		eor	r3, r3, #0xff		@ now looking for a 1 bit
 		movs	r3, r3, lsr ip		@ shift off unused bits
 		bne	.L_found
@@ -125,7 +139,9 @@ ENTRY(_find_first_bit_be)
 		beq	3f
 		mov	r2, #0
 1:		eor	r3, r2, #0x18		@ big endian byte ordering
-		ldrb	r3, [r0, r3, lsr #3]
+ ARM(		ldrb	r3, [r0, r3, lsr #3]	)
+ THUMB(		lsr	r3, #3			)
+ THUMB(		ldrb	r3, [r0, r3]		)
 		movs	r3, r3
 		bne	.L_found		@ any now set - found zero bit
 		add	r2, r2, #8		@ next bit pointer
@@ -141,7 +157,9 @@ ENTRY(_find_next_bit_be)
 		ands	ip, r2, #7
 		beq	1b			@ If new byte, goto old routine
 		eor	r3, r2, #0x18		@ big endian byte ordering
-		ldrb	r3, [r0, r3, lsr #3]
+ ARM(		ldrb	r3, [r0, r3, lsr #3]	)
+ THUMB(		lsr	r3, #3			)
+ THUMB(		ldrb	r3, [r0, r3]		)
 		movs	r3, r3, lsr ip		@ shift off unused bits
 		bne	.L_found
 		orr	r2, r2, #7		@ if zero, then no bits here
diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S
index 6763088b760..a1814d92712 100644
--- a/arch/arm/lib/getuser.S
+++ b/arch/arm/lib/getuser.S
@@ -36,8 +36,13 @@ ENTRY(__get_user_1)
 ENDPROC(__get_user_1)
 
 ENTRY(__get_user_2)
+#ifdef CONFIG_THUMB2_KERNEL
+2:	ldrbt	r2, [r0]
+3:	ldrbt	r3, [r0, #1]
+#else
 2:	ldrbt	r2, [r0], #1
 3:	ldrbt	r3, [r0]
+#endif
 #ifndef __ARMEB__
 	orr	r2, r2, r3, lsl #8
 #else
diff --git a/arch/arm/lib/io-writesw-armv4.S b/arch/arm/lib/io-writesw-armv4.S
index d6585612c86..ff4f71b579e 100644
--- a/arch/arm/lib/io-writesw-armv4.S
+++ b/arch/arm/lib/io-writesw-armv4.S
@@ -75,7 +75,10 @@ ENTRY(__raw_writesw)
 #endif
 
 .Loutsw_noalign:
-		ldr	r3, [r1, -r3]!
+ ARM(		ldr	r3, [r1, -r3]!	)
+ THUMB(		rsb	r3, r3, #0	)
+ THUMB(		ldr	r3, [r1, r3]	)
+ THUMB(		sub	r1, r3		)
 		subcs	r2, r2, #1
 		bcs	2f
 		subs	r2, r2, #2
diff --git a/arch/arm/lib/lshrdi3.S b/arch/arm/lib/lshrdi3.S
index 99ea338bf87..f83d449141f 100644
--- a/arch/arm/lib/lshrdi3.S
+++ b/arch/arm/lib/lshrdi3.S
@@ -43,7 +43,9 @@ ENTRY(__aeabi_llsr)
 	rsb	ip, r2, #32
 	movmi	al, al, lsr r2
 	movpl	al, ah, lsr r3
-	orrmi	al, al, ah, lsl ip
+ ARM(	orrmi	al, al, ah, lsl ip	)
+ THUMB(	lslmi	r3, ah, ip		)
+ THUMB(	orrmi	al, al, r3		)
 	mov	ah, ah, lsr r2
 	mov	pc, lr
 
diff --git a/arch/arm/lib/memcpy.S b/arch/arm/lib/memcpy.S
index e0d002641d3..a9b9e2287a0 100644
--- a/arch/arm/lib/memcpy.S
+++ b/arch/arm/lib/memcpy.S
@@ -13,8 +13,11 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 
+#define LDR1W_SHIFT	0
+#define STR1W_SHIFT	0
+
 	.macro ldr1w ptr reg abort
-	ldr \reg, [\ptr], #4
+	W(ldr) \reg, [\ptr], #4
 	.endm
 
 	.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
@@ -30,7 +33,7 @@
 	.endm
 
 	.macro str1w ptr reg abort
-	str \reg, [\ptr], #4
+	W(str) \reg, [\ptr], #4
 	.endm
 
 	.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
diff --git a/arch/arm/lib/memmove.S b/arch/arm/lib/memmove.S
index 12549187088..5025c863713 100644
--- a/arch/arm/lib/memmove.S
+++ b/arch/arm/lib/memmove.S
@@ -75,24 +75,24 @@ ENTRY(memmove)
 		addne	pc, pc, ip		@ C is always clear here
 		b	7f
 6:		nop
-		ldr	r3, [r1, #-4]!
-		ldr	r4, [r1, #-4]!
-		ldr	r5, [r1, #-4]!
-		ldr	r6, [r1, #-4]!
-		ldr	r7, [r1, #-4]!
-		ldr	r8, [r1, #-4]!
-		ldr	lr, [r1, #-4]!
+		W(ldr)	r3, [r1, #-4]!
+		W(ldr)	r4, [r1, #-4]!
+		W(ldr)	r5, [r1, #-4]!
+		W(ldr)	r6, [r1, #-4]!
+		W(ldr)	r7, [r1, #-4]!
+		W(ldr)	r8, [r1, #-4]!
+		W(ldr)	lr, [r1, #-4]!
 
 		add	pc, pc, ip
 		nop
 		nop
-		str	r3, [r0, #-4]!
-		str	r4, [r0, #-4]!
-		str	r5, [r0, #-4]!
-		str	r6, [r0, #-4]!
-		str	r7, [r0, #-4]!
-		str	r8, [r0, #-4]!
-		str	lr, [r0, #-4]!
+		W(str)	r3, [r0, #-4]!
+		W(str)	r4, [r0, #-4]!
+		W(str)	r5, [r0, #-4]!
+		W(str)	r6, [r0, #-4]!
+		W(str)	r7, [r0, #-4]!
+		W(str)	r8, [r0, #-4]!
+		W(str)	lr, [r0, #-4]!
 
 	CALGN(	bcs	2b			)
 
diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S
index 864f3c1c4f1..02fedbf07c0 100644
--- a/arch/arm/lib/putuser.S
+++ b/arch/arm/lib/putuser.S
@@ -37,6 +37,15 @@ ENDPROC(__put_user_1)
 
 ENTRY(__put_user_2)
 	mov	ip, r2, lsr #8
+#ifdef CONFIG_THUMB2_KERNEL
+#ifndef __ARMEB__
+2:	strbt	r2, [r0]
+3:	strbt	ip, [r0, #1]
+#else
+2:	strbt	ip, [r0]
+3:	strbt	r2, [r0, #1]
+#endif
+#else	/* !CONFIG_THUMB2_KERNEL */
 #ifndef __ARMEB__
 2:	strbt	r2, [r0], #1
 3:	strbt	ip, [r0]
@@ -44,6 +53,7 @@ ENTRY(__put_user_2)
 2:	strbt	ip, [r0], #1
 3:	strbt	r2, [r0]
 #endif
+#endif	/* CONFIG_THUMB2_KERNEL */
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__put_user_2)
@@ -55,8 +65,13 @@ ENTRY(__put_user_4)
 ENDPROC(__put_user_4)
 
 ENTRY(__put_user_8)
+#ifdef CONFIG_THUMB2_KERNEL
+5:	strt	r2, [r0]
+6:	strt	r3, [r0, #4]
+#else
 5:	strt	r2, [r0], #4
 6:	strt	r3, [r0]
+#endif
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__put_user_8)
diff --git a/arch/arm/lib/strncpy_from_user.S b/arch/arm/lib/strncpy_from_user.S
index 330373c26dd..1c9814f346c 100644
--- a/arch/arm/lib/strncpy_from_user.S
+++ b/arch/arm/lib/strncpy_from_user.S
@@ -23,7 +23,7 @@
 ENTRY(__strncpy_from_user)
 	mov	ip, r1
 1:	subs	r2, r2, #1
-USER(	ldrplbt	r3, [r1], #1)
+	ldrusr	r3, r1, 1, pl
 	bmi	2f
 	strb	r3, [r0], #1
 	teq	r3, #0
diff --git a/arch/arm/lib/strnlen_user.S b/arch/arm/lib/strnlen_user.S
index 90bb9d02083..7855b290665 100644
--- a/arch/arm/lib/strnlen_user.S
+++ b/arch/arm/lib/strnlen_user.S
@@ -23,7 +23,7 @@
 ENTRY(__strnlen_user)
 	mov	r2, r0
 1:
-USER(	ldrbt	r3, [r0], #1)
+	ldrusr	r3, r0, 1
 	teq	r3, #0
 	beq	2f
 	subs	r1, r1, #1
-- 
cgit v1.2.3


From 07f33a035ddda78095bed64f39db54334776841d Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:32:57 +0100
Subject: Thumb-2: Implement the unified VFP support

This patch modifies the VFP files for the ARM/Thumb-2 unified
assembly syntax.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/vfp/vfphw.S | 48 ++++++++++++++++++++++++++++++++----------------
 1 file changed, 32 insertions(+), 16 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index 1aeae38725d..66dc2d03b7f 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -209,40 +209,55 @@ ENDPROC(vfp_save_state)
 last_VFP_context_address:
 	.word	last_VFP_context
 
-ENTRY(vfp_get_float)
-	add	pc, pc, r0, lsl #3
+	.macro	tbl_branch, base, tmp, shift
+#ifdef CONFIG_THUMB2_KERNEL
+	adr	\tmp, 1f
+	add	\tmp, \tmp, \base, lsl \shift
+	mov	pc, \tmp
+#else
+	add	pc, pc, \base, lsl \shift
 	mov	r0, r0
+#endif
+1:
+	.endm
+
+ENTRY(vfp_get_float)
+	tbl_branch r0, r3, #3
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-	mrc	p10, 0, r0, c\dr, c0, 0	@ fmrs	r0, s0
+1:	mrc	p10, 0, r0, c\dr, c0, 0	@ fmrs	r0, s0
 	mov	pc, lr
-	mrc	p10, 0, r0, c\dr, c0, 4	@ fmrs	r0, s1
+	.org	1b + 8
+1:	mrc	p10, 0, r0, c\dr, c0, 4	@ fmrs	r0, s1
 	mov	pc, lr
+	.org	1b + 8
 	.endr
 ENDPROC(vfp_get_float)
 
 ENTRY(vfp_put_float)
-	add	pc, pc, r1, lsl #3
-	mov	r0, r0
+	tbl_branch r1, r3, #3
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-	mcr	p10, 0, r0, c\dr, c0, 0	@ fmsr	r0, s0
+1:	mcr	p10, 0, r0, c\dr, c0, 0	@ fmsr	r0, s0
 	mov	pc, lr
-	mcr	p10, 0, r0, c\dr, c0, 4	@ fmsr	r0, s1
+	.org	1b + 8
+1:	mcr	p10, 0, r0, c\dr, c0, 4	@ fmsr	r0, s1
 	mov	pc, lr
+	.org	1b + 8
 	.endr
 ENDPROC(vfp_put_float)
 
 ENTRY(vfp_get_double)
-	add	pc, pc, r0, lsl #3
-	mov	r0, r0
+	tbl_branch r0, r3, #3
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-	fmrrd	r0, r1, d\dr
+1:	fmrrd	r0, r1, d\dr
 	mov	pc, lr
+	.org	1b + 8
 	.endr
 #ifdef CONFIG_VFPv3
 	@ d16 - d31 registers
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-	mrrc	p11, 3, r0, r1, c\dr	@ fmrrd	r0, r1, d\dr
+1:	mrrc	p11, 3, r0, r1, c\dr	@ fmrrd	r0, r1, d\dr
 	mov	pc, lr
+	.org	1b + 8
 	.endr
 #endif
 
@@ -253,17 +268,18 @@ ENTRY(vfp_get_double)
 ENDPROC(vfp_get_double)
 
 ENTRY(vfp_put_double)
-	add	pc, pc, r2, lsl #3
-	mov	r0, r0
+	tbl_branch r2, r3, #3
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-	fmdrr	d\dr, r0, r1
+1:	fmdrr	d\dr, r0, r1
 	mov	pc, lr
+	.org	1b + 8
 	.endr
 #ifdef CONFIG_VFPv3
 	@ d16 - d31 registers
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-	mcrr	p11, 3, r1, r2, c\dr	@ fmdrr	r1, r2, d\dr
+1:	mcrr	p11, 3, r1, r2, c\dr	@ fmdrr	r1, r2, d\dr
 	mov	pc, lr
+	.org	1b + 8
 	.endr
 #endif
 ENDPROC(vfp_put_double)
-- 
cgit v1.2.3


From 0e056f20f18d0efa5da920f3cf8532adc56d5779 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:32:58 +0100
Subject: Thumb-2: Implement the unified boot code

This patch adds the ARM/Thumb-2 unified support for the
arch/arm/boot/* files.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/boot/compressed/head.S | 167 ++++++++++++++++++++++++----------------
 1 file changed, 99 insertions(+), 68 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 82f5fcfd956..bd60e836987 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -140,7 +140,8 @@ start:
 		tst	r2, #3			@ not user?
 		bne	not_angel
 		mov	r0, #0x17		@ angel_SWIreason_EnterSVC
-		swi	0x123456		@ angel_SWI_ARM
+ ARM(		swi	0x123456	)	@ angel_SWI_ARM
+ THUMB(		svc	0xab		)	@ angel_SWI_THUMB
 not_angel:
 		mrs	r2, cpsr		@ turn off interrupts to
 		orr	r2, r2, #0xc0		@ prevent angel from running
@@ -161,7 +162,9 @@ not_angel:
 
 		.text
 		adr	r0, LC0
-		ldmia	r0, {r1, r2, r3, r4, r5, r6, ip, sp}
+ ARM(		ldmia	r0, {r1, r2, r3, r4, r5, r6, ip, sp}	)
+ THUMB(		ldmia	r0, {r1, r2, r3, r4, r5, r6, ip}	)
+ THUMB(		ldr	sp, [r0, #28]				)
 		subs	r0, r0, r1		@ calculate the delta offset
 
 						@ if delta is zero, we are
@@ -263,22 +266,25 @@ not_relocated:	mov	r0, #0
  * r6     = processor ID
  * r7     = architecture ID
  * r8     = atags pointer
- * r9-r14 = corrupted
+ * r9-r12,r14 = corrupted
  */
 		add	r1, r5, r0		@ end of decompressed kernel
 		adr	r2, reloc_start
 		ldr	r3, LC1
 		add	r3, r2, r3
-1:		ldmia	r2!, {r9 - r14}		@ copy relocation code
-		stmia	r1!, {r9 - r14}
-		ldmia	r2!, {r9 - r14}
-		stmia	r1!, {r9 - r14}
+1:		ldmia	r2!, {r9 - r12, r14}	@ copy relocation code
+		stmia	r1!, {r9 - r12, r14}
+		ldmia	r2!, {r9 - r12, r14}
+		stmia	r1!, {r9 - r12, r14}
 		cmp	r2, r3
 		blo	1b
-		add	sp, r1, #128		@ relocate the stack
+		mov	sp, r1
+		add	sp, sp, #128		@ relocate the stack
 
 		bl	cache_clean_flush
-		add	pc, r5, r0		@ call relocation code
+ ARM(		add	pc, r5, r0		) @ call relocation code
+ THUMB(		add	r12, r5, r0		)
+ THUMB(		mov	pc, r12			) @ call relocation code
 
 /*
  * We're not in danger of overwriting ourselves.  Do this the simple way.
@@ -499,6 +505,7 @@ __arm6_mmu_cache_on:
 		mov	pc, r12
 
 __common_mmu_cache_on:
+#ifndef CONFIG_THUMB2_KERNEL
 #ifndef DEBUG
 		orr	r0, r0, #0x000d		@ Write buffer, mmu
 #endif
@@ -510,6 +517,7 @@ __common_mmu_cache_on:
 1:		mcr	p15, 0, r0, c1, c0, 0	@ load control register
 		mrc	p15, 0, r0, c1, c0, 0	@ and read it back to
 		sub	pc, lr, r0, lsr #32	@ properly flush pipeline
+#endif
 
 /*
  * All code following this line is relocatable.  It is relocated by
@@ -523,7 +531,7 @@ __common_mmu_cache_on:
  * r6     = processor ID
  * r7     = architecture ID
  * r8     = atags pointer
- * r9-r14 = corrupted
+ * r9-r12,r14 = corrupted
  */
 		.align	5
 reloc_start:	add	r9, r5, r0
@@ -532,13 +540,14 @@ reloc_start:	add	r9, r5, r0
 		mov	r1, r4
 1:
 		.rept	4
-		ldmia	r5!, {r0, r2, r3, r10 - r14}	@ relocate kernel
-		stmia	r1!, {r0, r2, r3, r10 - r14}
+		ldmia	r5!, {r0, r2, r3, r10 - r12, r14}	@ relocate kernel
+		stmia	r1!, {r0, r2, r3, r10 - r12, r14}
 		.endr
 
 		cmp	r5, r9
 		blo	1b
-		add	sp, r1, #128		@ relocate the stack
+		mov	sp, r1
+		add	sp, sp, #128		@ relocate the stack
 		debug_reloc_end
 
 call_kernel:	bl	cache_clean_flush
@@ -572,7 +581,9 @@ call_cache_fn:	adr	r12, proc_types
 		ldr	r2, [r12, #4]		@ get mask
 		eor	r1, r1, r6		@ (real ^ match)
 		tst	r1, r2			@       & mask
-		addeq	pc, r12, r3		@ call cache function
+ ARM(		addeq	pc, r12, r3		) @ call cache function
+ THUMB(		addeq	r12, r3			)
+ THUMB(		moveq	pc, r12			) @ call cache function
 		add	r12, r12, #4*5
 		b	1b
 
@@ -595,9 +606,10 @@ call_cache_fn:	adr	r12, proc_types
 proc_types:
 		.word	0x41560600		@ ARM6/610
 		.word	0xffffffe0
-		b	__arm6_mmu_cache_off	@ works, but slow
-		b	__arm6_mmu_cache_off
+		W(b)	__arm6_mmu_cache_off	@ works, but slow
+		W(b)	__arm6_mmu_cache_off
 		mov	pc, lr
+ THUMB(		nop				)
 @		b	__arm6_mmu_cache_on		@ untested
 @		b	__arm6_mmu_cache_off
 @		b	__armv3_mmu_cache_flush
@@ -605,76 +617,84 @@ proc_types:
 		.word	0x00000000		@ old ARM ID
 		.word	0x0000f000
 		mov	pc, lr
+ THUMB(		nop				)
 		mov	pc, lr
+ THUMB(		nop				)
 		mov	pc, lr
+ THUMB(		nop				)
 
 		.word	0x41007000		@ ARM7/710
 		.word	0xfff8fe00
-		b	__arm7_mmu_cache_off
-		b	__arm7_mmu_cache_off
+		W(b)	__arm7_mmu_cache_off
+		W(b)	__arm7_mmu_cache_off
 		mov	pc, lr
+ THUMB(		nop				)
 
 		.word	0x41807200		@ ARM720T (writethrough)
 		.word	0xffffff00
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
 		mov	pc, lr
+ THUMB(		nop				)
 
 		.word	0x41007400		@ ARM74x
 		.word	0xff00ff00
-		b	__armv3_mpu_cache_on
-		b	__armv3_mpu_cache_off
-		b	__armv3_mpu_cache_flush
+		W(b)	__armv3_mpu_cache_on
+		W(b)	__armv3_mpu_cache_off
+		W(b)	__armv3_mpu_cache_flush
 		
 		.word	0x41009400		@ ARM94x
 		.word	0xff00ff00
-		b	__armv4_mpu_cache_on
-		b	__armv4_mpu_cache_off
-		b	__armv4_mpu_cache_flush
+		W(b)	__armv4_mpu_cache_on
+		W(b)	__armv4_mpu_cache_off
+		W(b)	__armv4_mpu_cache_flush
 
 		.word	0x00007000		@ ARM7 IDs
 		.word	0x0000f000
 		mov	pc, lr
+ THUMB(		nop				)
 		mov	pc, lr
+ THUMB(		nop				)
 		mov	pc, lr
+ THUMB(		nop				)
 
 		@ Everything from here on will be the new ID system.
 
 		.word	0x4401a100		@ sa110 / sa1100
 		.word	0xffffffe0
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv4_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x6901b110		@ sa1110
 		.word	0xfffffff0
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv4_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x56056930
 		.word	0xff0ffff0		@ PXA935
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv4_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x56158000		@ PXA168
 		.word	0xfffff000
-		b __armv4_mmu_cache_on
-		b __armv4_mmu_cache_off
-		b __armv5tej_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv5tej_mmu_cache_flush
 
 		.word	0x56056930
 		.word	0xff0ffff0		@ PXA935
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv4_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x56050000		@ Feroceon
 		.word	0xff0f0000
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv5tej_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv5tej_mmu_cache_flush
 
 #ifdef CONFIG_CPU_FEROCEON_OLD_ID
 		/* this conflicts with the standard ARMv5TE entry */
@@ -687,47 +707,50 @@ proc_types:
 
 		.word	0x66015261		@ FA526
 		.word	0xff01fff1
-		b	__fa526_cache_on
-		b	__armv4_mmu_cache_off
-		b	__fa526_cache_flush
+		W(b)	__fa526_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__fa526_cache_flush
 
 		@ These match on the architecture ID
 
 		.word	0x00020000		@ ARMv4T
 		.word	0x000f0000
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv4_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x00050000		@ ARMv5TE
 		.word	0x000f0000
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv4_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x00060000		@ ARMv5TEJ
 		.word	0x000f0000
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv5tej_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x0007b000		@ ARMv6
 		.word	0x000ff000
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv6_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv6_mmu_cache_flush
 
 		.word	0x000f0000		@ new CPU Id
 		.word	0x000f0000
-		b	__armv7_mmu_cache_on
-		b	__armv7_mmu_cache_off
-		b	__armv7_mmu_cache_flush
+		W(b)	__armv7_mmu_cache_on
+		W(b)	__armv7_mmu_cache_off
+		W(b)	__armv7_mmu_cache_flush
 
 		.word	0			@ unrecognised type
 		.word	0
 		mov	pc, lr
+ THUMB(		nop				)
 		mov	pc, lr
+ THUMB(		nop				)
 		mov	pc, lr
+ THUMB(		nop				)
 
 		.size	proc_types, . - proc_types
 
@@ -854,7 +877,7 @@ __armv7_mmu_cache_flush:
 		b	iflush
 hierarchical:
 		mcr	p15, 0, r10, c7, c10, 5	@ DMB
-		stmfd	sp!, {r0-r5, r7, r9, r11}
+		stmfd	sp!, {r0-r7, r9-r11}
 		mrc	p15, 1, r0, c0, c0, 1	@ read clidr
 		ands	r3, r0, #0x7000000	@ extract loc from clidr
 		mov	r3, r3, lsr #23		@ left align loc bit field
@@ -879,8 +902,12 @@ loop1:
 loop2:
 		mov	r9, r4			@ create working copy of max way size
 loop3:
-		orr	r11, r10, r9, lsl r5	@ factor way and cache number into r11
-		orr	r11, r11, r7, lsl r2	@ factor index number into r11
+ ARM(		orr	r11, r10, r9, lsl r5	) @ factor way and cache number into r11
+ ARM(		orr	r11, r11, r7, lsl r2	) @ factor index number into r11
+ THUMB(		lsl	r6, r9, r5		)
+ THUMB(		orr	r11, r10, r6		) @ factor way and cache number into r11
+ THUMB(		lsl	r6, r7, r2		)
+ THUMB(		orr	r11, r11, r6		) @ factor index number into r11
 		mcr	p15, 0, r11, c7, c14, 2	@ clean & invalidate by set/way
 		subs	r9, r9, #1		@ decrement the way
 		bge	loop3
@@ -891,7 +918,7 @@ skip:
 		cmp	r3, r10
 		bgt	loop1
 finished:
-		ldmfd	sp!, {r0-r5, r7, r9, r11}
+		ldmfd	sp!, {r0-r7, r9-r11}
 		mov	r10, #0			@ swith back to cache level 0
 		mcr	p15, 2, r10, c0, c0, 0	@ select current cache level in cssr
 iflush:
@@ -925,9 +952,13 @@ __armv4_mmu_cache_flush:
 		mov	r11, #8
 		mov	r11, r11, lsl r3	@ cache line size in bytes
 no_cache_id:
-		bic	r1, pc, #63		@ align to longest cache line
+		mov	r1, pc
+		bic	r1, r1, #63		@ align to longest cache line
 		add	r2, r1, r2
-1:		ldr	r3, [r1], r11		@ s/w flush D cache
+1:
+ ARM(		ldr	r3, [r1], r11		) @ s/w flush D cache
+ THUMB(		ldr     r3, [r1]		) @ s/w flush D cache
+ THUMB(		add     r1, r1, r11		)
 		teq	r1, r2
 		bne	1b
 
-- 
cgit v1.2.3


From adca6dc23bc620ea95392659625200a252b97be3 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:32:59 +0100
Subject: Thumb-2: Add support for loadable modules

Modules compiled to Thumb-2 have two additional relocations needing to
be resolved at load time, R_ARM_THM_CALL and R_ARM_THM_JUMP24, for BL
and B.W instructions. The maximum Thumb-2 addressing range is +/-2^24
(+/-16MB) therefore the MODULES_VADDR macro in asm/memory.h is set to
(MODULES_END - 8MB) for the Thumb-2 compiled kernel.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/include/asm/elf.h    |  3 +++
 arch/arm/include/asm/memory.h |  6 +++++
 arch/arm/kernel/module.c      | 53 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 62 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index c207504de84..c3b911ee915 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -55,6 +55,9 @@ typedef struct user_fp elf_fpregset_t;
 #define R_ARM_MOVW_ABS_NC	43
 #define R_ARM_MOVT_ABS		44
 
+#define R_ARM_THM_CALL		10
+#define R_ARM_THM_JUMP24	30
+
 /*
  * These are used to set parameters in the core dumps.
  */
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 85763db8744..376be1a6286 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -44,7 +44,13 @@
  * The module space lives between the addresses given by TASK_SIZE
  * and PAGE_OFFSET - it must be within 32MB of the kernel text.
  */
+#ifndef CONFIG_THUMB2_KERNEL
 #define MODULES_VADDR		(PAGE_OFFSET - 16*1024*1024)
+#else
+/* smaller range for Thumb-2 symbols relocation (2^24)*/
+#define MODULES_VADDR		(PAGE_OFFSET - 8*1024*1024)
+#endif
+
 #if TASK_SIZE > MODULES_VADDR
 #error Top of user space clashes with start of module space
 #endif
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index bac03c81489..f28c5e9c51e 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -102,6 +102,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 		unsigned long loc;
 		Elf32_Sym *sym;
 		s32 offset;
+		u32 upper, lower, sign, j1, j2;
 
 		offset = ELF32_R_SYM(rel->r_info);
 		if (offset < 0 || offset > (symsec->sh_size / sizeof(Elf32_Sym))) {
@@ -184,6 +185,58 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 					(offset & 0x0fff);
 			break;
 
+		case R_ARM_THM_CALL:
+		case R_ARM_THM_JUMP24:
+			upper = *(u16 *)loc;
+			lower = *(u16 *)(loc + 2);
+
+			/*
+			 * 25 bit signed address range (Thumb-2 BL and B.W
+			 * instructions):
+			 *   S:I1:I2:imm10:imm11:0
+			 * where:
+			 *   S     = upper[10]   = offset[24]
+			 *   I1    = ~(J1 ^ S)   = offset[23]
+			 *   I2    = ~(J2 ^ S)   = offset[22]
+			 *   imm10 = upper[9:0]  = offset[21:12]
+			 *   imm11 = lower[10:0] = offset[11:1]
+			 *   J1    = lower[13]
+			 *   J2    = lower[11]
+			 */
+			sign = (upper >> 10) & 1;
+			j1 = (lower >> 13) & 1;
+			j2 = (lower >> 11) & 1;
+			offset = (sign << 24) | ((~(j1 ^ sign) & 1) << 23) |
+				((~(j2 ^ sign) & 1) << 22) |
+				((upper & 0x03ff) << 12) |
+				((lower & 0x07ff) << 1);
+			if (offset & 0x01000000)
+				offset -= 0x02000000;
+			offset += sym->st_value - loc;
+
+			/* only Thumb addresses allowed (no interworking) */
+			if (!(offset & 1) ||
+			    offset <= (s32)0xff000000 ||
+			    offset >= (s32)0x01000000) {
+				printk(KERN_ERR
+				       "%s: relocation out of range, section "
+				       "%d reloc %d sym '%s'\n", module->name,
+				       relindex, i, strtab + sym->st_name);
+				return -ENOEXEC;
+			}
+
+			sign = (offset >> 24) & 1;
+			j1 = sign ^ (~(offset >> 23) & 1);
+			j2 = sign ^ (~(offset >> 22) & 1);
+			*(u16 *)loc = (u16)((upper & 0xf800) | (sign << 10) |
+					    ((offset >> 12) & 0x03ff));
+			*(u16 *)(loc + 2) = (u16)((lower & 0xd000) |
+						  (j1 << 13) | (j2 << 11) |
+						  ((offset >> 1) & 0x07ff));
+			upper = *(u16 *)loc;
+			lower = *(u16 *)(loc + 2);
+			break;
+
 		default:
 			printk(KERN_ERR "%s: unknown relocation: %u\n",
 			       module->name, ELF32_R_TYPE(rel->r_info));
-- 
cgit v1.2.3


From dff2ab16ac53d2e21c1ee5ec72f446d5740d8ca2 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:33:00 +0100
Subject: Thumb-2: Pass a Thumb-2 address to the secondary CPUs to jump to

This patch sets bit 0 in the startup address passed to the secondary
CPUs so that they branch into Thumb-2 mode.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mach-realview/platsmp.c | 18 ++++++------------
 1 file changed, 6 insertions(+), 12 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index ac0e83f1cc3..a88458b4799 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -20,6 +20,7 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/localtimer.h>
+#include <asm/unified.h>
 
 #include <mach/board-eb.h>
 #include <mach/board-pb11mp.h>
@@ -137,26 +138,19 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 static void __init poke_milo(void)
 {
-	extern void secondary_startup(void);
-
 	/* nobody is to be released from the pen yet */
 	pen_release = -1;
 
 	/*
-	 * write the address of secondary startup into the system-wide
-	 * flags register, then clear the bottom two bits, which is what
-	 * BootMonitor is waiting for
+	 * Write the address of secondary startup into the system-wide flags
+	 * register. The BootMonitor waits for this register to become
+	 * non-zero.
 	 */
-#if 1
 #define REALVIEW_SYS_FLAGSS_OFFSET 0x30
-	__raw_writel(virt_to_phys(realview_secondary_startup),
-		     __io_address(REALVIEW_SYS_BASE) +
-		     REALVIEW_SYS_FLAGSS_OFFSET);
 #define REALVIEW_SYS_FLAGSC_OFFSET 0x34
-	__raw_writel(3,
+	__raw_writel(BSYM(virt_to_phys(realview_secondary_startup)),
 		     __io_address(REALVIEW_SYS_BASE) +
-		     REALVIEW_SYS_FLAGSC_OFFSET);
-#endif
+		     REALVIEW_SYS_FLAGSS_OFFSET);
 
 	mb();
 }
-- 
cgit v1.2.3


From e2ed3be7319f2734fcd9c7638888501934c22751 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:33:01 +0100
Subject: Thumb-2: Make the uImage entry an odd number

This allows U-Boot to branch to the kernel in Thumb-2 mode via
"mov pc, lr".

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/boot/Makefile | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index da226abce2d..4a590f4113e 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -61,7 +61,7 @@ endif
 
 quiet_cmd_uimage = UIMAGE  $@
       cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \
-		   -C none -a $(LOADADDR) -e $(LOADADDR) \
+		   -C none -a $(LOADADDR) -e $(STARTADDR) \
 		   -n 'Linux-$(KERNELRELEASE)' -d $< $@
 
 ifeq ($(CONFIG_ZBOOT_ROM),y)
@@ -70,6 +70,13 @@ else
 $(obj)/uImage: LOADADDR=$(ZRELADDR)
 endif
 
+ifeq ($(CONFIG_THUMB2_KERNEL),y)
+# Set bit 0 to 1 so that "mov pc, rx" switches to Thumb-2 mode
+$(obj)/uImage: STARTADDR=$(shell echo $(LOADADDR) | sed -e "s/.$$/1/")
+else
+$(obj)/uImage: STARTADDR=$(LOADADDR)
+endif
+
 $(obj)/uImage:	$(obj)/zImage FORCE
 	$(call if_changed,uimage)
 	@echo '  Image $@ is ready'
-- 
cgit v1.2.3


From 16c79651a5ee1ad7e4fca65a7c5309dfca89ed28 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:33:02 +0100
Subject: Thumb-2: Add Thumb-2 support to the build files

This patch adds the necessary entries to the Makefile and Kconfig
files for building the Thumb-2 kernel.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/Kconfig       | 12 ++++++++++++
 arch/arm/Kconfig.debug |  1 +
 arch/arm/Makefile      | 11 +++++++++--
 3 files changed, 22 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index da28e7ba608..a36b5a8b123 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -983,6 +983,18 @@ config HZ
 	default AT91_TIMER_HZ if ARCH_AT91
 	default 100
 
+config THUMB2_KERNEL
+	bool "Compile the kernel in Thumb-2 mode"
+	depends on CPU_V7 && EXPERIMENTAL
+	select AEABI
+	select ARM_ASM_UNIFIED
+	help
+	  By enabling this option, the kernel will be compiled in
+	  Thumb-2 mode. A compiler/assembler that understand the unified
+	  ARM-Thumb syntax is needed.
+
+	  If unsure, say N.
+
 config ARM_ASM_UNIFIED
 	bool
 
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index a89e4734b8f..1a6f70e5292 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -8,6 +8,7 @@ source "lib/Kconfig.debug"
 # n, but then RMK will have to kill you ;).
 config FRAME_POINTER
 	bool
+	depends on !THUMB2_KERNEL
 	default y if !ARM_UNWIND
 	help
 	  If you say N here, the resulting kernel will be slightly smaller and
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 3505572a21e..e150f232458 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -93,9 +93,16 @@ ifeq ($(CONFIG_ARM_UNWIND),y)
 CFLAGS_ABI	+=-funwind-tables
 endif
 
+ifeq ($(CONFIG_THUMB2_KERNEL),y)
+AFLAGS_AUTOIT	:=$(call as-option,-Wa$(comma)-mimplicit-it=thumb,-Wa$(comma)-mauto-it)
+AFLAGS_NOWARN	:=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
+CFLAGS_THUMB2	:=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
+AFLAGS_THUMB2	:=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb
+endif
+
 # Need -Uarm for gcc < 3.x
-KBUILD_CFLAGS	+=$(CFLAGS_ABI) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
-KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float
+KBUILD_CFLAGS	+=$(CFLAGS_ABI) $(CFLAGS_THUMB2) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
+KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(AFLAGS_THUMB2) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float
 
 CHECKFLAGS	+= -D__arm__
 
-- 
cgit v1.2.3


From 09529f7a1a010cc364267fc5895a71c3853eb82c Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:34:55 +0100
Subject: nommu: Fix the fault processing for the MMU-less case

The patch adds the necessary ifdefs around functions that only make
sense when the MMU is enabled.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mm/fault.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 6fdcbb70982..ee01ccae3f5 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -23,6 +23,7 @@
 
 #include "fault.h"
 
+#ifdef CONFIG_MMU
 
 #ifdef CONFIG_KPROBES
 static inline int notify_page_fault(struct pt_regs *regs, unsigned int fsr)
@@ -97,6 +98,10 @@ void show_pte(struct mm_struct *mm, unsigned long addr)
 
 	printk("\n");
 }
+#else					/* CONFIG_MMU */
+void show_pte(struct mm_struct *mm, unsigned long addr)
+{ }
+#endif					/* CONFIG_MMU */
 
 /*
  * Oops.  The kernel tried to access some page that wasn't present.
@@ -171,6 +176,7 @@ void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 		__do_kernel_fault(mm, addr, fsr, regs);
 }
 
+#ifdef CONFIG_MMU
 #define VM_FAULT_BADMAP		0x010000
 #define VM_FAULT_BADACCESS	0x020000
 
@@ -322,6 +328,13 @@ no_context:
 	__do_kernel_fault(mm, addr, fsr, regs);
 	return 0;
 }
+#else					/* CONFIG_MMU */
+static int
+do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+	return 0;
+}
+#endif					/* CONFIG_MMU */
 
 /*
  * First Level Translation Fault Handler
@@ -340,6 +353,7 @@ no_context:
  * interrupt or a critical region, and should only copy the information
  * from the master page table, nothing more.
  */
+#ifdef CONFIG_MMU
 static int __kprobes
 do_translation_fault(unsigned long addr, unsigned int fsr,
 		     struct pt_regs *regs)
@@ -378,6 +392,14 @@ bad_area:
 	do_bad_area(addr, fsr, regs);
 	return 0;
 }
+#else					/* CONFIG_MMU */
+static int
+do_translation_fault(unsigned long addr, unsigned int fsr,
+		     struct pt_regs *regs)
+{
+	return 0;
+}
+#endif					/* CONFIG_MMU */
 
 /*
  * Some section permission faults need to be handled gracefully.
-- 
cgit v1.2.3


From 9a45f026bb3ba720765d46f62f5c464d3317a8ab Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:34:56 +0100
Subject: nommu: Remove the context.id from asm-offsets.c when !MMU

There is no MMU context switching on MMU-less systems.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/include/asm/mmu_context.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h
index 263fed05ea3..bcdb9291ef0 100644
--- a/arch/arm/include/asm/mmu_context.h
+++ b/arch/arm/include/asm/mmu_context.h
@@ -62,8 +62,10 @@ static inline void check_context(struct mm_struct *mm)
 
 static inline void check_context(struct mm_struct *mm)
 {
+#ifdef CONFIG_MMU
 	if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq))
 		__check_kvm_seq(mm);
+#endif
 }
 
 #define init_new_context(tsk,mm)	0
-- 
cgit v1.2.3


From 365f7a43497dfdfdc05ca03896a8e22ee6944179 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:34:57 +0100
Subject: nommu: Add MMU-less support for Integrator platforms

This patch redefines the IO_ADDRESS macro in
include/asm-arm/hardware.h.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mach-integrator/include/mach/hardware.h |  4 ++++
 arch/arm/mach-integrator/integrator_cp.c         | 16 ++++++++--------
 2 files changed, 12 insertions(+), 8 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-integrator/include/mach/hardware.h b/arch/arm/mach-integrator/include/mach/hardware.h
index 1251319ef9a..d795642fad2 100644
--- a/arch/arm/mach-integrator/include/mach/hardware.h
+++ b/arch/arm/mach-integrator/include/mach/hardware.h
@@ -36,8 +36,12 @@
 #define PCIO_BASE		PCI_IO_VADDR
 #define PCIMEM_BASE		PCI_MEMORY_VADDR
 
+#ifdef CONFIG_MMU
 /* macro to get at IO space when running virtually */
 #define IO_ADDRESS(x) (((x) >> 4) + IO_BASE) 
+#else
+#define IO_ADDRESS(x) (x)
+#endif
 
 #define pcibios_assign_all_busses()	1
 
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 4ac04055c2e..452931b2690 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -49,14 +49,14 @@
 
 #define INTCP_PA_CLCD_BASE		0xc0000000
 
-#define INTCP_VA_CIC_BASE		0xf1000040
-#define INTCP_VA_PIC_BASE		0xf1400000
-#define INTCP_VA_SIC_BASE		0xfca00000
+#define INTCP_VA_CIC_BASE		IO_ADDRESS(INTEGRATOR_HDR_BASE) + 0x40
+#define INTCP_VA_PIC_BASE		IO_ADDRESS(INTEGRATOR_IC_BASE)
+#define INTCP_VA_SIC_BASE		IO_ADDRESS(0xca000000)
 
 #define INTCP_PA_ETH_BASE		0xc8000000
 #define INTCP_ETH_SIZE			0x10
 
-#define INTCP_VA_CTRL_BASE		0xfcb00000
+#define INTCP_VA_CTRL_BASE		IO_ADDRESS(0xcb000000)
 #define INTCP_FLASHPROG			0x04
 #define CINTEGRATOR_FLASHPROG_FLVPPEN	(1 << 0)
 #define CINTEGRATOR_FLASHPROG_FLWREN	(1 << 1)
@@ -121,12 +121,12 @@ static struct map_desc intcp_io_desc[] __initdata = {
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= 0xfca00000,
+		.virtual	= IO_ADDRESS(0xca000000),
 		.pfn		= __phys_to_pfn(0xca000000),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= 0xfcb00000,
+		.virtual	= IO_ADDRESS(0xcb000000),
 		.pfn		= __phys_to_pfn(0xcb000000),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
@@ -394,8 +394,8 @@ static struct platform_device *intcp_devs[] __initdata = {
  */
 static unsigned int mmc_status(struct device *dev)
 {
-	unsigned int status = readl(0xfca00004);
-	writel(8, 0xfcb00008);
+	unsigned int status = readl(IO_ADDRESS(0xca000000) + 4);
+	writel(8, IO_ADDRESS(0xcb000000) + 8);
 
 	return status & 8;
 }
-- 
cgit v1.2.3


From 5d57795e26c413656725c26bd053dbee3711adee Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:34:57 +0100
Subject: nommu: Add MMU-less support for the RealView boards

This patch defines the IO_ADDRESS macro for the !CONFIG_MMU case.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mach-realview/include/mach/hardware.h | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-realview/include/mach/hardware.h b/arch/arm/mach-realview/include/mach/hardware.h
index b42c14f89ac..8a638d15797 100644
--- a/arch/arm/mach-realview/include/mach/hardware.h
+++ b/arch/arm/mach-realview/include/mach/hardware.h
@@ -25,6 +25,7 @@
 #include <asm/sizes.h>
 
 /* macro to get at IO space when running virtually */
+#ifdef CONFIG_MMU
 /*
  * Statically mapped addresses:
  *
@@ -33,6 +34,9 @@
  * 1fxx xxxx -> fexx xxxx
  */
 #define IO_ADDRESS(x)		(((x) & 0x03ffffff) + 0xfb000000)
+#else
+#define IO_ADDRESS(x)		(x)
+#endif
 #define __io_address(n)		__io(IO_ADDRESS(n))
 
 #endif
-- 
cgit v1.2.3


From 68b7f7153fa58df710924fbb79722717d2d16094 Mon Sep 17 00:00:00 2001
From: Paul Brook <paul@codesourcery.com>
Date: Fri, 24 Jul 2009 12:34:58 +0100
Subject: nommu: ptrace support

The patch below adds ARM ptrace functions to get the process load address.
This is required for useful userspace debugging on mmuless systems.  These
values are obtained by reading magic offsets with PTRACE_PEEKUSR, as on other
nommu targets. I picked arbitrary large values for the offsets.

Signed-off-by: Paul Brook <paul@codesourcery.com>
---
 arch/arm/include/asm/ptrace.h | 8 ++++++++
 arch/arm/kernel/ptrace.c      | 8 +++++++-
 2 files changed, 15 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
index 67b833c9b6b..bbecccda76d 100644
--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -82,6 +82,14 @@
 #define PSR_ENDSTATE	0
 #endif
 
+/* 
+ * These are 'magic' values for PTRACE_PEEKUSR that return info about where a
+ * process is located in memory.
+ */
+#define PT_TEXT_ADDR		0x10000
+#define PT_DATA_ADDR		0x10004
+#define PT_TEXT_END_ADDR	0x10008
+
 #ifndef __ASSEMBLY__
 
 /*
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 89882a1d018..a2ea3854cb3 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -521,7 +521,13 @@ static int ptrace_read_user(struct task_struct *tsk, unsigned long off,
 		return -EIO;
 
 	tmp = 0;
-	if (off < sizeof(struct pt_regs))
+	if (off == PT_TEXT_ADDR)
+		tmp = tsk->mm->start_code;
+	else if (off == PT_DATA_ADDR)
+		tmp = tsk->mm->start_data;
+	else if (off == PT_TEXT_END_ADDR)
+		tmp = tsk->mm->end_code;
+	else if (off < sizeof(struct pt_regs))
 		tmp = get_user_reg(tsk, off >> 2);
 
 	return put_user(tmp, ret);
-- 
cgit v1.2.3


From 05efde9d04ccc1d66a9d2225527c6ee638baa385 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:34:59 +0100
Subject: nommu: Do not override the CP15 control reg value returned from
 initfunc

The patch removes the "mrc" instruction in head-nommu.S overriding the
r0 register containing the value to be written in the CP15 system
control register.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/kernel/head-nommu.S | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index b16393d2b71..e5dfc2895e2 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -61,7 +61,10 @@ ENDPROC(stext)
  */
 __after_proc_init:
 #ifdef CONFIG_CPU_CP15
-	mrc	p15, 0, r0, c1, c0, 0		@ read control reg
+	/*
+	 * CP15 system control register value returned in r0 from
+	 * the CPU init function.
+	 */
 #ifdef CONFIG_ALIGNMENT_TRAP
 	orr	r0, r0, #CR_A
 #else
-- 
cgit v1.2.3


From 3c4279750c7d3f88a0638a44e257d7d8d10732f2 Mon Sep 17 00:00:00 2001
From: "Hyok S. Choi" <hyok.choi@samsung.com>
Date: Fri, 24 Jul 2009 12:35:00 +0100
Subject: nommu: Enables to select noMMU mode

MMU option is now selectable.

Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com>
---
 arch/arm/Kconfig | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a36b5a8b123..dc70660fe6b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -46,10 +46,6 @@ config GENERIC_CLOCKEVENTS_BROADCAST
 	depends on GENERIC_CLOCKEVENTS
 	default y if SMP && !LOCAL_TIMERS
 
-config MMU
-	bool
-	default y
-
 config NO_IOPORT
 	bool
 
@@ -188,6 +184,13 @@ source "kernel/Kconfig.freezer"
 
 menu "System Type"
 
+config MMU
+	bool "MMU-based Paged Memory Management Support"
+	default y
+	help
+	  Select if you want MMU-based virtualised addressing space
+	  support by paged memory management. If unsure, say 'Y'.
+
 choice
 	prompt "ARM system type"
 	default ARCH_VERSATILE
-- 
cgit v1.2.3


From 2732f4b6f11689fa08e2db5689fc652d608936b5 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:35:01 +0100
Subject: nommu: Remove the memory_start/end variables from ARM page-nommu.h

These variables do not seem to be used anywhere in the kernel.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/include/asm/page-nommu.h | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/page-nommu.h b/arch/arm/include/asm/page-nommu.h
index 3574c0deb37..d1b162a18dc 100644
--- a/arch/arm/include/asm/page-nommu.h
+++ b/arch/arm/include/asm/page-nommu.h
@@ -43,7 +43,4 @@ typedef unsigned long pgprot_t;
 #define __pmd(x)        (x)
 #define __pgprot(x)     (x)
 
-extern unsigned long memory_start;
-extern unsigned long memory_end;
-
 #endif
-- 
cgit v1.2.3


From ab6494f0c96f8953c7ad3e35301b2de2db3add57 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:35:02 +0100
Subject: nommu: Add noMMU support to the DMA API

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mm/dma-mapping.c | 94 ++++++++++++++++++++++++++++++++++++-----------
 1 file changed, 72 insertions(+), 22 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 510c179b0ac..b30925fcbcd 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -36,7 +36,34 @@
 #define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT)
 #define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT)
 
+static u64 get_coherent_dma_mask(struct device *dev)
+{
+	u64 mask = ISA_DMA_THRESHOLD;
+
+	if (dev) {
+		mask = dev->coherent_dma_mask;
+
+		/*
+		 * Sanity check the DMA mask - it must be non-zero, and
+		 * must be able to be satisfied by a DMA allocation.
+		 */
+		if (mask == 0) {
+			dev_warn(dev, "coherent DMA mask is unset\n");
+			return 0;
+		}
+
+		if ((~mask) & ISA_DMA_THRESHOLD) {
+			dev_warn(dev, "coherent DMA mask %#llx is smaller "
+				 "than system GFP_DMA mask %#llx\n",
+				 mask, (unsigned long long)ISA_DMA_THRESHOLD);
+			return 0;
+		}
+	}
 
+	return mask;
+}
+
+#ifdef CONFIG_MMU
 /*
  * These are the page tables (2MB each) covering uncached, DMA consistent allocations
  */
@@ -152,7 +179,8 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
 	struct page *page;
 	struct arm_vm_region *c;
 	unsigned long order;
-	u64 mask = ISA_DMA_THRESHOLD, limit;
+	u64 mask = get_coherent_dma_mask(dev);
+	u64 limit;
 
 	if (!consistent_pte[0]) {
 		printk(KERN_ERR "%s: not initialised\n", __func__);
@@ -160,25 +188,8 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
 		return NULL;
 	}
 
-	if (dev) {
-		mask = dev->coherent_dma_mask;
-
-		/*
-		 * Sanity check the DMA mask - it must be non-zero, and
-		 * must be able to be satisfied by a DMA allocation.
-		 */
-		if (mask == 0) {
-			dev_warn(dev, "coherent DMA mask is unset\n");
-			goto no_page;
-		}
-
-		if ((~mask) & ISA_DMA_THRESHOLD) {
-			dev_warn(dev, "coherent DMA mask %#llx is smaller "
-				 "than system GFP_DMA mask %#llx\n",
-				 mask, (unsigned long long)ISA_DMA_THRESHOLD);
-			goto no_page;
-		}
-	}
+	if (!mask)
+		goto no_page;
 
 	/*
 	 * Sanity check the allocation size.
@@ -267,6 +278,31 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
 	*handle = ~0;
 	return NULL;
 }
+#else	/* !CONFIG_MMU */
+static void *
+__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
+	    pgprot_t prot)
+{
+	void *virt;
+	u64 mask = get_coherent_dma_mask(dev);
+
+	if (!mask)
+		goto error;
+
+	if (mask != 0xffffffff)
+		gfp |= GFP_DMA;
+	virt = kmalloc(size, gfp);
+	if (!virt)
+		goto error;
+
+	*handle =  virt_to_dma(dev, virt);
+	return virt;
+
+error:
+	*handle = ~0;
+	return NULL;
+}
+#endif	/* CONFIG_MMU */
 
 /*
  * Allocate DMA-coherent memory space and return both the kernel remapped
@@ -311,9 +347,10 @@ EXPORT_SYMBOL(dma_alloc_writecombine);
 static int dma_mmap(struct device *dev, struct vm_area_struct *vma,
 		    void *cpu_addr, dma_addr_t dma_addr, size_t size)
 {
+	int ret = -ENXIO;
+#ifdef CONFIG_MMU
 	unsigned long flags, user_size, kern_size;
 	struct arm_vm_region *c;
-	int ret = -ENXIO;
 
 	user_size = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
 
@@ -334,6 +371,7 @@ static int dma_mmap(struct device *dev, struct vm_area_struct *vma,
 					      vma->vm_page_prot);
 		}
 	}
+#endif	/* CONFIG_MMU */
 
 	return ret;
 }
@@ -358,6 +396,7 @@ EXPORT_SYMBOL(dma_mmap_writecombine);
  * free a page as defined by the above mapping.
  * Must not be called with IRQs disabled.
  */
+#ifdef CONFIG_MMU
 void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
 {
 	struct arm_vm_region *c;
@@ -444,6 +483,14 @@ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr
 	       __func__, cpu_addr);
 	dump_stack();
 }
+#else	/* !CONFIG_MMU */
+void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
+{
+	if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
+		return;
+	kfree(cpu_addr);
+}
+#endif	/* CONFIG_MMU */
 EXPORT_SYMBOL(dma_free_coherent);
 
 /*
@@ -451,10 +498,12 @@ EXPORT_SYMBOL(dma_free_coherent);
  */
 static int __init consistent_init(void)
 {
+	int ret = 0;
+#ifdef CONFIG_MMU
 	pgd_t *pgd;
 	pmd_t *pmd;
 	pte_t *pte;
-	int ret = 0, i = 0;
+	int i = 0;
 	u32 base = CONSISTENT_BASE;
 
 	do {
@@ -477,6 +526,7 @@ static int __init consistent_init(void)
 		consistent_pte[i++] = pte;
 		base += (1 << PGDIR_SHIFT);
 	} while (base < CONSISTENT_END);
+#endif	/* !CONFIG_MMU */
 
 	return ret;
 }
-- 
cgit v1.2.3


From b32f3afe3c5c4ddd1c414d41845470a99c88475f Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:35:03 +0100
Subject: nommu: Include asm/setup.h in arch/arm/mm/nommu.c

This is needed for the struct meminfo definition.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mm/nommu.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index ad7bacc693b..900811cc913 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -12,6 +12,7 @@
 #include <asm/cacheflush.h>
 #include <asm/sections.h>
 #include <asm/page.h>
+#include <asm/setup.h>
 #include <asm/mach/arch.h>
 
 #include "mm.h"
-- 
cgit v1.2.3


From 8b79d5f217d7fc7d6b85ee5b10899f2bd20b64ed Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:35:04 +0100
Subject: nommu: Add #ifdef CONFIG_MMU around the PTE sanity checks

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mm/proc-macros.S | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
index 54b1f721dec..f1559c22778 100644
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -77,6 +77,7 @@
  * Sanity check the PTE configuration for the code below - which makes
  * certain assumptions about how these bits are layed out.
  */
+#ifdef CONFIG_MMU
 #if L_PTE_SHARED != PTE_EXT_SHARED
 #error PTE shared bit mismatch
 #endif
@@ -90,6 +91,7 @@
      L_PTE_FILE+L_PTE_PRESENT) > L_PTE_SHARED
 #error Invalid Linux PTE bit settings
 #endif
+#endif	/* CONFIG_MMU */
 
 /*
  * The ARMv6 and ARMv7 set_pte_ext translation function.
-- 
cgit v1.2.3


From 0e0fe9219d2e5426d87a0f62db445010d4aba2c7 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:35:05 +0100
Subject: nommu: Do not allow REALVIEW_HIGH_PHYS_OFFSET if !MMU

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mach-realview/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index d4cfa214538..dfc9b0bc6eb 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -75,7 +75,7 @@ config MACH_REALVIEW_PBX
 
 config REALVIEW_HIGH_PHYS_OFFSET
 	bool "High physical base address for the RealView platform"
-	depends on !MACH_REALVIEW_PB1176
+	depends on MMU && !MACH_REALVIEW_PB1176
 	default y
 	help
 	  RealView boards other than PB1176 have the RAM available at
-- 
cgit v1.2.3


From 8bdca0ac2b1ec35091941c57b4202f7096291c5b Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:35:06 +0100
Subject: nommu: Fix compressed/head.S to not perform MMU specific operations

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/boot/compressed/head.S | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index bd60e836987..fa6fbf45cf3 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -438,6 +438,7 @@ ENDPROC(__setup_mmu)
 
 __armv4_mmu_cache_on:
 		mov	r12, lr
+#ifdef CONFIG_MMU
 		bl	__setup_mmu
 		mov	r0, #0
 		mcr	p15, 0, r0, c7, c10, 4	@ drain write buffer
@@ -451,10 +452,12 @@ __armv4_mmu_cache_on:
 		bl	__common_mmu_cache_on
 		mov	r0, #0
 		mcr	p15, 0, r0, c8, c7, 0	@ flush I,D TLBs
+#endif
 		mov	pc, r12
 
 __armv7_mmu_cache_on:
 		mov	r12, lr
+#ifdef CONFIG_MMU
 		mrc	p15, 0, r11, c0, c1, 4	@ read ID_MMFR0
 		tst	r11, #0xf		@ VMSA
 		blne	__setup_mmu
@@ -462,9 +465,11 @@ __armv7_mmu_cache_on:
 		mcr	p15, 0, r0, c7, c10, 4	@ drain write buffer
 		tst	r11, #0xf		@ VMSA
 		mcrne	p15, 0, r0, c8, c7, 0	@ flush I,D TLBs
+#endif
 		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
 		orr	r0, r0, #0x5000		@ I-cache enable, RR cache replacement
 		orr	r0, r0, #0x003c		@ write buffer
+#ifdef CONFIG_MMU
 #ifdef CONFIG_CPU_ENDIAN_BE8
 		orr	r0, r0, #1 << 25	@ big-endian page tables
 #endif
@@ -472,6 +477,7 @@ __armv7_mmu_cache_on:
 		movne	r1, #-1
 		mcrne	p15, 0, r3, c2, c0, 0	@ load page table pointer
 		mcrne	p15, 0, r1, c3, c0, 0	@ load domain access control
+#endif
 		mcr	p15, 0, r0, c1, c0, 0	@ load control register
 		mrc	p15, 0, r0, c1, c0, 0	@ and read it back
 		mov	r0, #0
@@ -785,22 +791,30 @@ __armv3_mpu_cache_off:
 		mov	pc, lr
 
 __armv4_mmu_cache_off:
+#ifdef CONFIG_MMU
 		mrc	p15, 0, r0, c1, c0
 		bic	r0, r0, #0x000d
 		mcr	p15, 0, r0, c1, c0	@ turn MMU and cache off
 		mov	r0, #0
 		mcr	p15, 0, r0, c7, c7	@ invalidate whole cache v4
 		mcr	p15, 0, r0, c8, c7	@ invalidate whole TLB v4
+#endif
 		mov	pc, lr
 
 __armv7_mmu_cache_off:
 		mrc	p15, 0, r0, c1, c0
+#ifdef CONFIG_MMU
 		bic	r0, r0, #0x000d
+#else
+		bic	r0, r0, #0x000c
+#endif
 		mcr	p15, 0, r0, c1, c0	@ turn MMU and cache off
 		mov	r12, lr
 		bl	__armv7_mmu_cache_flush
 		mov	r0, #0
+#ifdef CONFIG_MMU
 		mcr	p15, 0, r0, c8, c7, 0	@ invalidate whole TLB
+#endif
 		mcr	p15, 0, r0, c7, c5, 6	@ invalidate BTC
 		mcr	p15, 0, r0, c7, c10, 4	@ DSB
 		mcr	p15, 0, r0, c7, c5, 4	@ ISB
-- 
cgit v1.2.3


From bdaaaec39792ee0035d6c5a5ad2520991e090a3c Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:35:06 +0100
Subject: nommu: Do not set PRRR and NMRR in proc-v7.S if !MMU

ARMv7-R profile CPUs do not have these registers.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mm/proc-v7.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index c19aecdb202..f3fa1c32fe9 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -234,7 +234,6 @@ __v7_setup:
 	mcr	p15, 0, r4, c2, c0, 1		@ load TTB1
 	mov	r10, #0x1f			@ domains 0, 1 = manager
 	mcr	p15, 0, r10, c3, c0, 0		@ load domain access register
-#endif
 	/*
 	 * Memory region attributes with SCTLR.TRE=1
 	 *
@@ -267,6 +266,7 @@ __v7_setup:
 	ldr	r6, =0x40e040e0			@ NMRR
 	mcr	p15, 0, r5, c10, c2, 0		@ write PRRR
 	mcr	p15, 0, r6, c10, c2, 1		@ write NMRR
+#endif
 	adr	r5, v7_crval
 	ldmia	r5, {r5, r6}
 #ifdef CONFIG_CPU_ENDIAN_BE8
-- 
cgit v1.2.3


From 412bb0a6224f96661c042a109c4978649c00ed52 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:37:09 +0100
Subject: Include linux/sched.h in arch/arm/mm/fault.c

When building with !MMU, task_struct is not defined. Just include the
relevant file.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mm/fault.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index ee01ccae3f5..556c8daf087 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -16,6 +16,7 @@
 #include <linux/kprobes.h>
 #include <linux/uaccess.h>
 #include <linux/page-flags.h>
+#include <linux/sched.h>
 
 #include <asm/system.h>
 #include <asm/pgtable.h>
-- 
cgit v1.2.3


From 4c8abb556b393b3ed73d72481ba27705294f6dc6 Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 24 Jul 2009 12:16:57 +0100
Subject: ARM: 5622/1: at91: at91sam9g45 headers: DMA peripheral identifiers

It adds DMA peripheral identifiers for hardware handshaking interface. It will
be used in platform code.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/include/mach/at91sam9g45.h | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
index 2c42cf5f0c5..a526869aee3 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9g45.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
@@ -135,4 +135,21 @@
 
 #define CONSISTENT_DMA_SIZE	SZ_4M
 
+/*
+ * DMA peripheral identifiers
+ * for hardware handshaking interface
+ */
+#define AT_DMA_ID_MCI0		 0
+#define AT_DMA_ID_SPI0_TX	 1
+#define AT_DMA_ID_SPI0_RX	 2
+#define AT_DMA_ID_SPI1_TX	 3
+#define AT_DMA_ID_SPI1_RX	 4
+#define AT_DMA_ID_SSC0_TX	 5
+#define AT_DMA_ID_SSC0_RX	 6
+#define AT_DMA_ID_SSC1_TX	 7
+#define AT_DMA_ID_SSC1_RX	 8
+#define AT_DMA_ID_AC97_TX	 9
+#define AT_DMA_ID_AC97_RX	10
+#define AT_DMA_ID_MCI1		13
+
 #endif
-- 
cgit v1.2.3


From a5b92cc348299c20be215b9f4b50853ecfbf3864 Mon Sep 17 00:00:00 2001
From: Syed Rafiuddin <rafiuddin.syed@ti.com>
Date: Tue, 28 Jul 2009 18:57:10 +0530
Subject: ARM: OMAP4: Add McBSP support

This patch creates McBSP support on OMAP4430 development platform. This patch
includes corresponding base address changes for OMAP4.

Signed-off-by: Syed Rafiuddin <rafiuddin.syed@ti.com>
---
 arch/arm/mach-omap2/mcbsp.c             | 41 +++++++++++++++++++++++++++++++++
 arch/arm/plat-omap/include/mach/mcbsp.h |  8 ++++++-
 arch/arm/plat-omap/mcbsp.c              |  2 +-
 3 files changed, 49 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index a5c0f0435cd..d49dfb5e931 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -169,6 +169,42 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 #define OMAP34XX_MCBSP_PDATA_SZ		0
 #endif
 
+static struct omap_mcbsp_platform_data omap44xx_mcbsp_pdata[] = {
+	{
+		.phys_base      = OMAP44XX_MCBSP1_BASE,
+		.dma_rx_sync    = OMAP44XX_DMA_MCBSP1_RX,
+		.dma_tx_sync    = OMAP44XX_DMA_MCBSP1_TX,
+		.rx_irq         = INT_24XX_MCBSP1_IRQ_RX,
+		.tx_irq         = INT_24XX_MCBSP1_IRQ_TX,
+		.ops            = &omap2_mcbsp_ops,
+	},
+	{
+		.phys_base      = OMAP44XX_MCBSP2_BASE,
+		.dma_rx_sync    = OMAP44XX_DMA_MCBSP2_RX,
+		.dma_tx_sync    = OMAP44XX_DMA_MCBSP2_TX,
+		.rx_irq         = INT_24XX_MCBSP2_IRQ_RX,
+		.tx_irq         = INT_24XX_MCBSP2_IRQ_TX,
+		.ops            = &omap2_mcbsp_ops,
+	},
+	{
+		.phys_base      = OMAP44XX_MCBSP3_BASE,
+		.dma_rx_sync    = OMAP44XX_DMA_MCBSP3_RX,
+		.dma_tx_sync    = OMAP44XX_DMA_MCBSP3_TX,
+		.rx_irq         = INT_24XX_MCBSP3_IRQ_RX,
+		.tx_irq         = INT_24XX_MCBSP3_IRQ_TX,
+		.ops            = &omap2_mcbsp_ops,
+	},
+	{
+		.phys_base      = OMAP44XX_MCBSP4_BASE,
+		.dma_rx_sync    = OMAP44XX_DMA_MCBSP4_RX,
+		.dma_tx_sync    = OMAP44XX_DMA_MCBSP4_TX,
+		.rx_irq         = INT_24XX_MCBSP4_IRQ_RX,
+		.tx_irq         = INT_24XX_MCBSP4_IRQ_TX,
+		.ops            = &omap2_mcbsp_ops,
+	},
+};
+#define OMAP44XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap44xx_mcbsp_pdata)
+
 static int __init omap2_mcbsp_init(void)
 {
 	if (cpu_is_omap2420())
@@ -177,6 +213,8 @@ static int __init omap2_mcbsp_init(void)
 		omap_mcbsp_count = OMAP2430_MCBSP_PDATA_SZ;
 	if (cpu_is_omap34xx())
 		omap_mcbsp_count = OMAP34XX_MCBSP_PDATA_SZ;
+	if (cpu_is_omap44xx())
+		omap_mcbsp_count = OMAP44XX_MCBSP_PDATA_SZ;
 
 	mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *),
 								GFP_KERNEL);
@@ -192,6 +230,9 @@ static int __init omap2_mcbsp_init(void)
 	if (cpu_is_omap34xx())
 		omap_mcbsp_register_board_cfg(omap34xx_mcbsp_pdata,
 						OMAP34XX_MCBSP_PDATA_SZ);
+	if (cpu_is_omap44xx())
+		omap_mcbsp_register_board_cfg(omap44xx_mcbsp_pdata,
+						OMAP44XX_MCBSP_PDATA_SZ);
 
 	return omap_mcbsp_init();
 }
diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index bb154ea7676..ec6f81e06d3 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -53,6 +53,11 @@
 #define OMAP34XX_MCBSP4_BASE	0x49026000
 #define OMAP34XX_MCBSP5_BASE	0x48096000
 
+#define OMAP44XX_MCBSP1_BASE	0x49022000
+#define OMAP44XX_MCBSP2_BASE	0x49024000
+#define OMAP44XX_MCBSP3_BASE	0x49026000
+#define OMAP44XX_MCBSP4_BASE	0x48074000
+
 #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730)
 
 #define OMAP_MCBSP_REG_DRR2	0x00
@@ -98,7 +103,8 @@
 #define AUDIO_DMA_TX		OMAP_DMA_MCBSP1_TX
 #define AUDIO_DMA_RX		OMAP_DMA_MCBSP1_RX
 
-#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+	defined(CONFIG_ARCH_OMAP4)
 
 #define OMAP_MCBSP_REG_DRR2	0x00
 #define OMAP_MCBSP_REG_DRR1	0x04
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index efa0e0111f3..e42fa7cfc79 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -191,7 +191,7 @@ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config)
 	OMAP_MCBSP_WRITE(io_base, MCR2, config->mcr2);
 	OMAP_MCBSP_WRITE(io_base, MCR1, config->mcr1);
 	OMAP_MCBSP_WRITE(io_base, PCR0, config->pcr0);
-	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+	if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
 		OMAP_MCBSP_WRITE(io_base, XCCR, config->xccr);
 		OMAP_MCBSP_WRITE(io_base, RCCR, config->rccr);
 	}
-- 
cgit v1.2.3


From 085b54d99b8ee999e7905b8f16e201e0da8ba369 Mon Sep 17 00:00:00 2001
From: Syed Rafiuddin <rafiuddin.syed@ti.com>
Date: Tue, 28 Jul 2009 18:57:22 +0530
Subject: ARM: OMAP4: Add UART4 support

This patch adds UART4 support on OMAP4430 development platform.

Signed-off-by: Syed Rafiuddin <rafiuddin.syed@ti.com>
---
 arch/arm/mach-omap2/board-4430sdp.c |  2 +-
 arch/arm/mach-omap2/serial.c        | 10 ++++++++++
 2 files changed, 11 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 57e477bd89c..7e1e721f032 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -39,7 +39,7 @@ static struct platform_device *sdp4430_devices[] __initdata = {
 };
 
 static struct omap_uart_config sdp4430_uart_config __initdata = {
-	.enabled_uarts	= (1 << 0) | (1 << 1) | (1 << 2),
+	.enabled_uarts	= (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3),
 };
 
 static struct omap_lcd_config sdp4430_lcd_config __initdata = {
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index b094c15bfe4..c0bea75f13f 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -97,6 +97,16 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.regshift	= 2,
 		.uartclk	= OMAP24XX_BASE_BAUD * 16,
 	}, {
+#ifdef CONFIG_ARCH_OMAP4
+		.membase	= IO_ADDRESS(OMAP_UART4_BASE),
+		.mapbase	= OMAP_UART4_BASE,
+		.irq		= 70,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= OMAP24XX_BASE_BAUD * 16,
+	}, {
+#endif
 		.flags		= 0
 	}
 };
-- 
cgit v1.2.3


From 78a1a6d3411de1a8b0dc1cb92754b5f12f251912 Mon Sep 17 00:00:00 2001
From: Syed Rafiuddin <rafiuddin.syed@ti.com>
Date: Tue, 28 Jul 2009 18:57:30 +0530
Subject: ARM: OMAP4: Update the GPIO support

This patch adds GPIO support on OMAP4430 development platform.

Signed-off-by: Syed Rafiuddin <rafiuddin.syed@ti.com>
---
 arch/arm/plat-omap/gpio.c | 249 ++++++++++++++++++++++++++++++++++++----------
 1 file changed, 198 insertions(+), 51 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 26b387c1242..f0b71680ec5 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -138,6 +138,32 @@
 #define OMAP24XX_GPIO_CLEARDATAOUT	0x0090
 #define OMAP24XX_GPIO_SETDATAOUT	0x0094
 
+#define OMAP4_GPIO_REVISION		0x0000
+#define OMAP4_GPIO_SYSCONFIG		0x0010
+#define OMAP4_GPIO_EOI			0x0020
+#define OMAP4_GPIO_IRQSTATUSRAW0	0x0024
+#define OMAP4_GPIO_IRQSTATUSRAW1	0x0028
+#define OMAP4_GPIO_IRQSTATUS0		0x002c
+#define OMAP4_GPIO_IRQSTATUS1		0x0030
+#define OMAP4_GPIO_IRQSTATUSSET0	0x0034
+#define OMAP4_GPIO_IRQSTATUSSET1	0x0038
+#define OMAP4_GPIO_IRQSTATUSCLR0	0x003c
+#define OMAP4_GPIO_IRQSTATUSCLR1	0x0040
+#define OMAP4_GPIO_IRQWAKEN0		0x0044
+#define OMAP4_GPIO_IRQWAKEN1		0x0048
+#define OMAP4_GPIO_SYSSTATUS		0x0104
+#define OMAP4_GPIO_CTRL			0x0130
+#define OMAP4_GPIO_OE			0x0134
+#define OMAP4_GPIO_DATAIN		0x0138
+#define OMAP4_GPIO_DATAOUT		0x013c
+#define OMAP4_GPIO_LEVELDETECT0		0x0140
+#define OMAP4_GPIO_LEVELDETECT1		0x0144
+#define OMAP4_GPIO_RISINGDETECT		0x0148
+#define OMAP4_GPIO_FALLINGDETECT	0x014c
+#define OMAP4_GPIO_DEBOUNCENABLE	0x0150
+#define OMAP4_GPIO_DEBOUNCINGTIME	0x0154
+#define OMAP4_GPIO_CLEARDATAOUT		0x0190
+#define OMAP4_GPIO_SETDATAOUT		0x0194
 /*
  * omap34xx specific GPIO registers
  */
@@ -386,11 +412,15 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
 		reg += OMAP850_GPIO_DIR_CONTROL;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-			defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_OE;
 		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+	case METHOD_GPIO_24XX:
+		reg += OMAP4_GPIO_OE;
+		break;
 #endif
 	default:
 		WARN_ON(1);
@@ -459,8 +489,7 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
 			l &= ~(1 << gpio);
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-			defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		if (enable)
 			reg += OMAP24XX_GPIO_SETDATAOUT;
@@ -468,6 +497,15 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
 			reg += OMAP24XX_GPIO_CLEARDATAOUT;
 		l = 1 << gpio;
 		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+	case METHOD_GPIO_24XX:
+		if (enable)
+			reg += OMAP4_GPIO_SETDATAOUT;
+		else
+			reg += OMAP4_GPIO_CLEARDATAOUT;
+		l = 1 << gpio;
+		break;
 #endif
 	default:
 		WARN_ON(1);
@@ -511,11 +549,15 @@ static int __omap_get_gpio_datain(int gpio)
 		reg += OMAP850_GPIO_DATA_INPUT;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-			defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_DATAIN;
 		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+	case METHOD_GPIO_24XX:
+		reg += OMAP4_GPIO_DATAIN;
+		break;
 #endif
 	default:
 		return -EINVAL;
@@ -544,7 +586,11 @@ void omap_set_gpio_debounce(int gpio, int enable)
 
 	bank = get_gpio_bank(gpio);
 	reg = bank->base;
+#ifdef CONFIG_ARCH_OMAP4
+	reg += OMAP4_GPIO_DEBOUNCENABLE;
+#else
 	reg += OMAP24XX_GPIO_DEBOUNCE_EN;
+#endif
 
 	spin_lock_irqsave(&bank->lock, flags);
 	val = __raw_readl(reg);
@@ -581,7 +627,11 @@ void omap_set_gpio_debounce_time(int gpio, int enc_time)
 	reg = bank->base;
 
 	enc_time &= 0xff;
+#ifdef CONFIG_ARCH_OMAP4
+	reg += OMAP4_GPIO_DEBOUNCINGTIME;
+#else
 	reg += OMAP24XX_GPIO_DEBOUNCE_VAL;
+#endif
 	__raw_writel(enc_time, reg);
 }
 EXPORT_SYMBOL(omap_set_gpio_debounce_time);
@@ -593,23 +643,46 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
 {
 	void __iomem *base = bank->base;
 	u32 gpio_bit = 1 << gpio;
+	u32 val;
 
-	MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
-		trigger & IRQ_TYPE_LEVEL_LOW);
-	MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
-		trigger & IRQ_TYPE_LEVEL_HIGH);
-	MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
-		trigger & IRQ_TYPE_EDGE_RISING);
-	MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
-		trigger & IRQ_TYPE_EDGE_FALLING);
-
+	if (cpu_is_omap44xx()) {
+		MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT0, gpio_bit,
+			trigger & IRQ_TYPE_LEVEL_LOW);
+		MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT1, gpio_bit,
+			trigger & IRQ_TYPE_LEVEL_HIGH);
+		MOD_REG_BIT(OMAP4_GPIO_RISINGDETECT, gpio_bit,
+			trigger & IRQ_TYPE_EDGE_RISING);
+		MOD_REG_BIT(OMAP4_GPIO_FALLINGDETECT, gpio_bit,
+			trigger & IRQ_TYPE_EDGE_FALLING);
+	} else {
+		MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
+			trigger & IRQ_TYPE_LEVEL_LOW);
+		MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
+			trigger & IRQ_TYPE_LEVEL_HIGH);
+		MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
+			trigger & IRQ_TYPE_EDGE_RISING);
+		MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
+			trigger & IRQ_TYPE_EDGE_FALLING);
+	}
 	if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
-		if (trigger != 0)
-			__raw_writel(1 << gpio, bank->base
+		if (cpu_is_omap44xx()) {
+			if (trigger != 0)
+				__raw_writel(1 << gpio, bank->base+
+						OMAP4_GPIO_IRQWAKEN0);
+			else {
+				val = __raw_readl(bank->base +
+							OMAP4_GPIO_IRQWAKEN0);
+				__raw_writel(val & (~(1 << gpio)), bank->base +
+							 OMAP4_GPIO_IRQWAKEN0);
+			}
+		} else {
+			if (trigger != 0)
+				__raw_writel(1 << gpio, bank->base
 					+ OMAP24XX_GPIO_SETWKUENA);
-		else
-			__raw_writel(1 << gpio, bank->base
+			else
+				__raw_writel(1 << gpio, bank->base
 					+ OMAP24XX_GPIO_CLEARWKUENA);
+		}
 	} else {
 		if (trigger != 0)
 			bank->enabled_non_wakeup_gpios |= gpio_bit;
@@ -617,9 +690,15 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
 			bank->enabled_non_wakeup_gpios &= ~gpio_bit;
 	}
 
-	bank->level_mask =
-		__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) |
-		__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+	if (cpu_is_omap44xx()) {
+		bank->level_mask =
+			__raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT0) |
+			__raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT1);
+	} else {
+		bank->level_mask =
+			__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) |
+			__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+	}
 }
 #endif
 
@@ -783,11 +862,15 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 		reg += OMAP850_GPIO_INT_STATUS;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-				defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_IRQSTATUS1;
 		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+	case METHOD_GPIO_24XX:
+		reg += OMAP4_GPIO_IRQSTATUS0;
+		break;
 #endif
 	default:
 		WARN_ON(1);
@@ -798,12 +881,16 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 	/* Workaround for clearing DSP GPIO interrupts to allow retention */
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2;
-	if (cpu_is_omap24xx() || cpu_is_omap34xx())
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+	reg = bank->base + OMAP4_GPIO_IRQSTATUS1;
+#endif
+	if (cpu_is_omap24xx() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
 		__raw_writel(gpio_mask, reg);
 
 	/* Flush posted write for the irq status to avoid spurious interrupts */
 	__raw_readl(reg);
-#endif
+	}
 }
 
 static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio)
@@ -853,12 +940,17 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
 		inv = 1;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-				defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_IRQENABLE1;
 		mask = 0xffffffff;
 		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+	case METHOD_GPIO_24XX:
+		reg += OMAP4_GPIO_IRQSTATUSSET0;
+		mask = 0xffffffff;
+		break;
 #endif
 	default:
 		WARN_ON(1);
@@ -927,8 +1019,7 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
 			l |= gpio_mask;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-		defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		if (enable)
 			reg += OMAP24XX_GPIO_SETIRQENABLE1;
@@ -936,6 +1027,15 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
 			reg += OMAP24XX_GPIO_CLEARIRQENABLE1;
 		l = gpio_mask;
 		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+	case METHOD_GPIO_24XX:
+		if (enable)
+			reg += OMAP4_GPIO_IRQSTATUSSET0;
+		else
+			reg += OMAP4_GPIO_IRQSTATUSCLR0;
+		l = gpio_mask;
+		break;
 #endif
 	default:
 		WARN_ON(1);
@@ -1112,10 +1212,13 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 	if (bank->method == METHOD_GPIO_850)
 		isr_reg = bank->base + OMAP850_GPIO_INT_STATUS;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-				defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	if (bank->method == METHOD_GPIO_24XX)
 		isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+	if (bank->method == METHOD_GPIO_24XX)
+		isr_reg = bank->base + OMAP4_GPIO_IRQSTATUS0;
 #endif
 	while(1) {
 		u32 isr_saved, level_mask = 0;
@@ -1547,7 +1650,7 @@ static int __init _omap_gpio_init(void)
 
 		gpio_bank_count = OMAP34XX_NR_GPIOS;
 		gpio_bank = gpio_bank_44xx;
-		rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
+		rev = __raw_readl(gpio_bank[0].base + OMAP4_GPIO_REVISION);
 		printk(KERN_INFO "OMAP44xx GPIO hardware version %d.%d\n",
 			(rev >> 4) & 0x0f, rev & 0x0f);
 	}
@@ -1581,7 +1684,16 @@ static int __init _omap_gpio_init(void)
 			static const u32 non_wakeup_gpios[] = {
 				0xe203ffc0, 0x08700040
 			};
-
+		if (cpu_is_omap44xx()) {
+			__raw_writel(0xffffffff, bank->base +
+						OMAP4_GPIO_IRQSTATUSCLR0);
+			__raw_writew(0x0015, bank->base +
+						OMAP4_GPIO_SYSCONFIG);
+			__raw_writel(0x00000000, bank->base +
+						 OMAP4_GPIO_DEBOUNCENABLE);
+			/* Initialize interface clock ungated, module enabled */
+			__raw_writel(0, bank->base + OMAP4_GPIO_CTRL);
+		} else {
 			__raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_IRQENABLE1);
 			__raw_writel(0xffffffff, bank->base + OMAP24XX_GPIO_IRQSTATUS1);
 			__raw_writew(0x0015, bank->base + OMAP24XX_GPIO_SYSCONFIG);
@@ -1589,12 +1701,12 @@ static int __init _omap_gpio_init(void)
 
 			/* Initialize interface clock ungated, module enabled */
 			__raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL);
+		}
 			if (i < ARRAY_SIZE(non_wakeup_gpios))
 				bank->non_wakeup_gpios = non_wakeup_gpios[i];
 			gpio_count = 32;
 		}
 #endif
-
 		/* REVISIT eventually switch from OMAP-specific gpio structs
 		 * over to the generic ones
 		 */
@@ -1680,13 +1792,19 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
 			wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
 			break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-				defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 		case METHOD_GPIO_24XX:
 			wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
 			wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
 			wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
 			break;
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+		case METHOD_GPIO_24XX:
+			wake_status = bank->base + OMAP4_GPIO_IRQWAKEN0;
+			wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0;
+			wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0;
+			break;
 #endif
 		default:
 			continue;
@@ -1722,12 +1840,17 @@ static int omap_gpio_resume(struct sys_device *dev)
 			wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
 			break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-			defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 		case METHOD_GPIO_24XX:
 			wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
 			wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
 			break;
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+		case METHOD_GPIO_24XX:
+			wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0;
+			wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0;
+			break;
 #endif
 		default:
 			continue;
@@ -1772,20 +1895,28 @@ void omap2_gpio_prepare_for_retention(void)
 
 		if (!(bank->enabled_non_wakeup_gpios))
 			continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-				defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 		bank->saved_datain = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
 		l1 = __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
 		l2 = __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+		bank->saved_datain = __raw_readl(bank->base +
+							OMAP4_GPIO_DATAIN);
+		l1 = __raw_readl(bank->base + OMAP4_GPIO_FALLINGDETECT);
+		l2 = __raw_readl(bank->base + OMAP4_GPIO_RISINGDETECT);
 #endif
 		bank->saved_fallingdetect = l1;
 		bank->saved_risingdetect = l2;
 		l1 &= ~bank->enabled_non_wakeup_gpios;
 		l2 &= ~bank->enabled_non_wakeup_gpios;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-			defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 		__raw_writel(l1, bank->base + OMAP24XX_GPIO_FALLINGDETECT);
 		__raw_writel(l2, bank->base + OMAP24XX_GPIO_RISINGDETECT);
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+		__raw_writel(l1, bank->base + OMAP4_GPIO_FALLINGDETECT);
+		__raw_writel(l2, bank->base + OMAP4_GPIO_RISINGDETECT);
 #endif
 		c++;
 	}
@@ -1808,33 +1939,49 @@ void omap2_gpio_resume_after_retention(void)
 
 		if (!(bank->enabled_non_wakeup_gpios))
 			continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-			defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 		__raw_writel(bank->saved_fallingdetect,
 				 bank->base + OMAP24XX_GPIO_FALLINGDETECT);
 		__raw_writel(bank->saved_risingdetect,
 				 bank->base + OMAP24XX_GPIO_RISINGDETECT);
+		l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+		__raw_writel(bank->saved_fallingdetect,
+				 bank->base + OMAP4_GPIO_FALLINGDETECT);
+		__raw_writel(bank->saved_risingdetect,
+				 bank->base + OMAP4_GPIO_RISINGDETECT);
+		l = __raw_readl(bank->base + OMAP4_GPIO_DATAIN);
 #endif
 		/* Check if any of the non-wakeup interrupt GPIOs have changed
 		 * state.  If so, generate an IRQ by software.  This is
 		 * horribly racy, but it's the best we can do to work around
 		 * this silicon bug. */
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-			defined(CONFIG_ARCH_OMAP4)
-		l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
-#endif
 		l ^= bank->saved_datain;
 		l &= bank->non_wakeup_gpios;
 		if (l) {
 			u32 old0, old1;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-			defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 			old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
 			old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
 			__raw_writel(old0 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
 			__raw_writel(old1 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT1);
 			__raw_writel(old0, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
 			__raw_writel(old1, bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+			old0 = __raw_readl(bank->base +
+						OMAP4_GPIO_LEVELDETECT0);
+			old1 = __raw_readl(bank->base +
+						OMAP4_GPIO_LEVELDETECT1);
+			__raw_writel(old0 | l, bank->base +
+						OMAP4_GPIO_LEVELDETECT0);
+			__raw_writel(old1 | l, bank->base +
+						OMAP4_GPIO_LEVELDETECT1);
+			__raw_writel(old0, bank->base +
+						OMAP4_GPIO_LEVELDETECT0);
+			__raw_writel(old1, bank->base +
+						OMAP4_GPIO_LEVELDETECT1);
 #endif
 		}
 	}
-- 
cgit v1.2.3


From ef12379f205bed7e92434e12ddd44e62d13bebe1 Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Wed, 29 Jul 2009 22:41:06 +0100
Subject: ARM: 5628/1: ep93xx: Introduce Pulse Width Modulator (PWM) driver

The EP93xx features two PWMs (one on the EP9307) with the following
features:

  * Configurable dual output
  * Separate input clocks for each PWM output
  * 16-bit resolution
  * Programmable pulse width (duty cycle), interval (frequency), and
    polarity

This adds the necessary core support as well as the driver.  A sysfs
interface is provided to control the PWM outputs.

Signed-off-by: Matthieu Crapet <mcrapet@gmail.com>
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/clock.c                    |  4 ++
 arch/arm/mach-ep93xx/core.c                     | 85 +++++++++++++++++++++++++
 arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h |  1 +
 arch/arm/mach-ep93xx/include/mach/platform.h    |  4 ++
 4 files changed, 94 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index b6b53447b1b..3dd0e2a2309 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -72,6 +72,9 @@ static struct clk clk_keypad = {
 	.enable_mask	= EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
 	.set_rate	= set_keytchclk_rate,
 };
+static struct clk clk_pwm = {
+	.rate		= EP93XX_EXT_CLK_RATE,
+};
 
 /* DMA Clocks */
 static struct clk clk_m2p0 = {
@@ -137,6 +140,7 @@ static struct clk_lookup clocks[] = {
 	INIT_CK(NULL,			"pll2",		&clk_pll2),
 	INIT_CK("ep93xx-ohci",		NULL,		&clk_usb_host),
 	INIT_CK("ep93xx-keypad",	NULL,		&clk_keypad),
+	INIT_CK(NULL,			"pwm_clk",	&clk_pwm),
 	INIT_CK(NULL,			"m2p0",		&clk_m2p0),
 	INIT_CK(NULL,			"m2p1",		&clk_m2p1),
 	INIT_CK(NULL,			"m2p2",		&clk_m2p2),
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 2b58df0184c..40755298fa3 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -597,6 +597,91 @@ static struct platform_device ep93xx_leds = {
 };
 
 
+/*************************************************************************
+ * EP93xx pwm peripheral handling
+ *************************************************************************/
+static struct resource ep93xx_pwm0_resource[] = {
+	{
+		.start	= EP93XX_PWM_PHYS_BASE,
+		.end	= EP93XX_PWM_PHYS_BASE + 0x10 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device ep93xx_pwm0_device = {
+	.name		= "ep93xx-pwm",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(ep93xx_pwm0_resource),
+	.resource	= ep93xx_pwm0_resource,
+};
+
+static struct resource ep93xx_pwm1_resource[] = {
+	{
+		.start	= EP93XX_PWM_PHYS_BASE + 0x20,
+		.end	= EP93XX_PWM_PHYS_BASE + 0x30 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device ep93xx_pwm1_device = {
+	.name		= "ep93xx-pwm",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(ep93xx_pwm1_resource),
+	.resource	= ep93xx_pwm1_resource,
+};
+
+void __init ep93xx_register_pwm(int pwm0, int pwm1)
+{
+	if (pwm0)
+		platform_device_register(&ep93xx_pwm0_device);
+
+	/* NOTE: EP9307 does not have PWMOUT1 (pin EGPIO14) */
+	if (pwm1)
+		platform_device_register(&ep93xx_pwm1_device);
+}
+
+int ep93xx_pwm_acquire_gpio(struct platform_device *pdev)
+{
+	int err;
+
+	if (pdev->id == 0) {
+		err = 0;
+	} else if (pdev->id == 1) {
+		err = gpio_request(EP93XX_GPIO_LINE_EGPIO14,
+				   dev_name(&pdev->dev));
+		if (err)
+			return err;
+		err = gpio_direction_output(EP93XX_GPIO_LINE_EGPIO14, 0);
+		if (err)
+			goto fail;
+
+		/* PWM 1 output on EGPIO[14] */
+		ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_PONG);
+	} else {
+		err = -ENODEV;
+	}
+
+	return err;
+
+fail:
+	gpio_free(EP93XX_GPIO_LINE_EGPIO14);
+	return err;
+}
+EXPORT_SYMBOL(ep93xx_pwm_acquire_gpio);
+
+void ep93xx_pwm_release_gpio(struct platform_device *pdev)
+{
+	if (pdev->id == 1) {
+		gpio_direction_input(EP93XX_GPIO_LINE_EGPIO14);
+		gpio_free(EP93XX_GPIO_LINE_EGPIO14);
+
+		/* EGPIO[14] used for GPIO */
+		ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_PONG);
+	}
+}
+EXPORT_SYMBOL(ep93xx_pwm_release_gpio);
+
+
 extern void ep93xx_gpio_init(void);
 
 void __init ep93xx_init_devices(void)
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index a11ae779baa..ea78e908fc8 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -147,6 +147,7 @@
 #define EP93XX_ADC_BASE			EP93XX_APB_IOMEM(0x00100000)
 #define EP93XX_TOUCHSCREEN_BASE		EP93XX_APB_IOMEM(0x00100000)
 
+#define EP93XX_PWM_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x00110000)
 #define EP93XX_PWM_BASE			EP93XX_APB_IOMEM(0x00110000)
 
 #define EP93XX_RTC_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x00120000)
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 0af0a3ba704..5f5fa6574d3 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -5,6 +5,7 @@
 #ifndef __ASSEMBLY__
 
 struct i2c_board_info;
+struct platform_device;
 
 struct ep93xx_eth_data
 {
@@ -32,6 +33,9 @@ static inline void ep93xx_devcfg_clear_bits(unsigned int bits)
 
 void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
 void ep93xx_register_i2c(struct i2c_board_info *devices, int num);
+void ep93xx_register_pwm(int pwm0, int pwm1);
+int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);
+void ep93xx_pwm_release_gpio(struct platform_device *pdev);
 
 void ep93xx_init_devices(void);
 extern struct sys_timer ep93xx_timer;
-- 
cgit v1.2.3


From 41a353d126ca332c20cfd97683b6261992743840 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Eric=20B=C3=A9nard?= <eric@eukrea.com>
Date: Thu, 30 Jul 2009 07:20:03 +0100
Subject: ARM: 5629/1: Add support for Eukrea's CPU9260 & CPU9G20

CPU9260 and CPU9G20 share the same PCB populated with either
Atmel's AT91SAM9260B or AT91SAM9G20B with up to 64MB Strataflash,
up to 128MB SDRAM, up to 2GB NAND and an ethernet PHY in RMII mode.

Signed-off-by: Eric Benard <eric@eukrea.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/configs/cpu9260_defconfig  | 1338 +++++++++++++++++++++++++++++++++++
 arch/arm/configs/cpu9g20_defconfig  | 1328 ++++++++++++++++++++++++++++++++++
 arch/arm/mach-at91/Kconfig          |   14 +
 arch/arm/mach-at91/Makefile         |    2 +
 arch/arm/mach-at91/board-cpu9krea.c |  385 ++++++++++
 5 files changed, 3067 insertions(+)
 create mode 100644 arch/arm/configs/cpu9260_defconfig
 create mode 100644 arch/arm/configs/cpu9g20_defconfig
 create mode 100644 arch/arm/mach-at91/board-cpu9krea.c

(limited to 'arch/arm')

diff --git a/arch/arm/configs/cpu9260_defconfig b/arch/arm/configs/cpu9260_defconfig
new file mode 100644
index 00000000000..601e7f3d5e9
--- /dev/null
+++ b/arch/arm/configs/cpu9260_defconfig
@@ -0,0 +1,1338 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc3
+# Tue Jul 14 14:57:55 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+CONFIG_ARCH_AT91SAM9260=y
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9260 Variants
+#
+# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
+
+#
+# AT91SAM9260 / AT91SAM9XE Board Type
+#
+# CONFIG_MACH_AT91SAM9260EK is not set
+# CONFIG_MACH_CAM60 is not set
+# CONFIG_MACH_SAM9_L9260 is not set
+# CONFIG_MACH_AFEB9260 is not set
+# CONFIG_MACH_USB_A9260 is not set
+# CONFIG_MACH_QIL_A9260 is not set
+CONFIG_MACH_CPU9260=y
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_PLATRAM=y
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_HW=y
+# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91SAM9X_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_AT91SAM9 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/cpu9g20_defconfig b/arch/arm/configs/cpu9g20_defconfig
new file mode 100644
index 00000000000..b5b9cbbc697
--- /dev/null
+++ b/arch/arm/configs/cpu9g20_defconfig
@@ -0,0 +1,1328 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc3
+# Tue Jul 14 15:03:43 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+CONFIG_ARCH_AT91SAM9G20=y
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9G20 Board Type
+#
+# CONFIG_MACH_AT91SAM9G20EK is not set
+CONFIG_MACH_CPU9G20=y
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_PLATRAM=y
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91SAM9X_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_AT91SAM9 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 8f3e15abdb6..83a89720ada 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -217,6 +217,13 @@ config MACH_QIL_A9260
 	  Select this if you are using a Calao Systems QIL-A9260 Board.
 	  <http://www.calao-systems.com>
 
+config MACH_CPU9260
+	bool "Eukrea CPU9260 board"
+	depends on ARCH_AT91SAM9260
+	help
+	  Select this if you are using a Eukrea Electromatique's
+	  CPU9260 Board <http://www.eukrea.com/>
+
 endif
 
 # ----------------------------------------------------------
@@ -303,6 +310,13 @@ config MACH_AT91SAM9G20EK
 	help
 	  Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit.
 
+config MACH_CPU9G20
+	bool "Eukrea CPU9G20 board"
+	depends on ARCH_AT91SAM9G20
+	help
+	  Select this if you are using a Eukrea Electromatique's
+	  CPU9G20 Board <http://www.eukrea.com/>
+
 endif
 
 # ----------------------------------------------------------
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 4eaf80abe10..b2ea2e5a881 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -42,6 +42,7 @@ obj-$(CONFIG_MACH_SAM9_L9260)	+= board-sam9-l9260.o
 obj-$(CONFIG_MACH_USB_A9260)	+= board-usb-a9260.o
 obj-$(CONFIG_MACH_QIL_A9260)	+= board-qil-a9260.o
 obj-$(CONFIG_MACH_AFEB9260)	+= board-afeb-9260v1.o
+obj-$(CONFIG_MACH_CPU9260)	+= board-cpu9krea.o
 
 # AT91SAM9261 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
@@ -57,6 +58,7 @@ obj-$(CONFIG_MACH_AT91SAM9RLEK)	+= board-sam9rlek.o
 
 # AT91SAM9G20 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
+obj-$(CONFIG_MACH_CPU9G20)	+= board-cpu9krea.o
 
 # AT91SAM9G45 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
new file mode 100644
index 00000000000..4bc2e9f6ebb
--- /dev/null
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -0,0 +1,385 @@
+/*
+ * linux/arch/arm/mach-at91/board-cpu9krea.c
+ *
+ *  Copyright (C) 2005 SAN People
+ *  Copyright (C) 2006 Atmel
+ *  Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91sam9260_matrix.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+static void __init cpu9krea_map_io(void)
+{
+	/* Initialize processor: 18.432 MHz crystal */
+	at91sam9260_initialize(18432000);
+
+	/* DGBU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS |
+		ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
+		ATMEL_UART_DCD | ATMEL_UART_RI);
+
+	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS |
+		ATMEL_UART_RTS);
+
+	/* USART2 on ttyS3. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS |
+		ATMEL_UART_RTS);
+
+	/* USART3 on ttyS4. (Rx, Tx) */
+	at91_register_uart(AT91SAM9260_ID_US3, 4, 0);
+
+	/* USART4 on ttyS5. (Rx, Tx) */
+	at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
+
+	/* USART5 on ttyS6. (Rx, Tx) */
+	at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init cpu9krea_init_irq(void)
+{
+	at91sam9260_init_interrupts(NULL);
+}
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata cpu9krea_usbh_data = {
+	.ports		= 2,
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata cpu9krea_udc_data = {
+	.vbus_pin	= AT91_PIN_PC8,
+	.pullup_pin	= 0,		/* pull-up driven by UDC */
+};
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata cpu9krea_macb_data = {
+	.is_rmii	= 1,
+};
+
+/*
+ * NAND flash
+ */
+static struct atmel_nand_data __initdata cpu9krea_nand_data = {
+	.ale		= 21,
+	.cle		= 22,
+	.rdy_pin	= AT91_PIN_PC13,
+	.enable_pin	= AT91_PIN_PC14,
+	.bus_width_16	= 0,
+};
+
+#ifdef CONFIG_MACH_CPU9260
+static struct sam9_smc_config __initdata cpu9krea_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 1,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 1,
+
+	.ncs_read_pulse		= 3,
+	.nrd_pulse		= 3,
+	.ncs_write_pulse	= 3,
+	.nwe_pulse		= 3,
+
+	.read_cycle		= 5,
+	.write_cycle		= 5,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE
+		| AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+	.tdf_cycles		= 2,
+};
+#else
+static struct sam9_smc_config __initdata cpu9krea_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 2,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 2,
+
+	.ncs_read_pulse		= 4,
+	.nrd_pulse		= 4,
+	.ncs_write_pulse	= 4,
+	.nwe_pulse		= 4,
+
+	.read_cycle		= 7,
+	.write_cycle		= 7,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE
+		| AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+	.tdf_cycles		= 3,
+};
+#endif
+
+static void __init cpu9krea_add_device_nand(void)
+{
+	sam9_smc_configure(3, &cpu9krea_nand_smc_config);
+	at91_add_device_nand(&cpu9krea_nand_data);
+}
+
+/*
+ * NOR flash
+ */
+static struct physmap_flash_data cpuat9260_nor_data = {
+	.width		= 2,
+};
+
+#define NOR_BASE	AT91_CHIPSELECT_0
+#define NOR_SIZE	SZ_64M
+
+static struct resource nor_flash_resources[] = {
+	{
+		.start	= NOR_BASE,
+		.end	= NOR_BASE + NOR_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device cpu9krea_nor_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &cpuat9260_nor_data,
+	},
+	.resource	= nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+};
+
+#ifdef CONFIG_MACH_CPU9260
+static struct sam9_smc_config __initdata cpu9krea_nor_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 1,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 1,
+
+	.ncs_read_pulse		= 10,
+	.nrd_pulse		= 10,
+	.ncs_write_pulse	= 6,
+	.nwe_pulse		= 6,
+
+	.read_cycle		= 12,
+	.write_cycle		= 8,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE
+			| AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE
+			| AT91_SMC_DBW_16,
+	.tdf_cycles		= 2,
+};
+#else
+static struct sam9_smc_config __initdata cpu9krea_nor_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 1,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 1,
+
+	.ncs_read_pulse		= 13,
+	.nrd_pulse		= 13,
+	.ncs_write_pulse	= 8,
+	.nwe_pulse		= 8,
+
+	.read_cycle		= 15,
+	.write_cycle		= 10,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE
+			| AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE
+			| AT91_SMC_DBW_16,
+	.tdf_cycles		= 2,
+};
+#endif
+
+static __init void cpu9krea_add_device_nor(void)
+{
+	unsigned long csa;
+
+	csa = at91_sys_read(AT91_MATRIX_EBICSA);
+	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_VDDIOMSEL_3_3V);
+
+	/* configure chip-select 0 (NOR) */
+	sam9_smc_configure(0, &cpu9krea_nor_smc_config);
+
+	platform_device_register(&cpu9krea_nor_flash);
+}
+
+/*
+ * LEDs
+ */
+static struct gpio_led cpu9krea_leds[] = {
+	{	/* LED1 */
+		.name			= "LED1",
+		.gpio			= AT91_PIN_PC11,
+		.active_low		= 1,
+		.default_trigger	= "timer",
+	},
+	{	/* LED2 */
+		.name			= "LED2",
+		.gpio			= AT91_PIN_PC12,
+		.active_low		= 1,
+		.default_trigger	= "heartbeat",
+	},
+	{	/* LED3 */
+		.name			= "LED3",
+		.gpio			= AT91_PIN_PC7,
+		.active_low		= 1,
+		.default_trigger	= "none",
+	},
+	{	/* LED4 */
+		.name			= "LED4",
+		.gpio			= AT91_PIN_PC9,
+		.active_low		= 1,
+		.default_trigger	= "none",
+	}
+};
+
+static struct i2c_board_info __initdata cpu9krea_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("rtc-ds1307", 0x68),
+		.type	= "ds1339",
+	},
+};
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button cpu9krea_buttons[] = {
+	{
+		.gpio		= AT91_PIN_PC3,
+		.code		= BTN_0,
+		.desc		= "BP1",
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+	{
+		.gpio		= AT91_PIN_PB20,
+		.code		= BTN_1,
+		.desc		= "BP2",
+		.active_low	= 1,
+		.wakeup		= 1,
+	}
+};
+
+static struct gpio_keys_platform_data cpu9krea_button_data = {
+	.buttons	= cpu9krea_buttons,
+	.nbuttons	= ARRAY_SIZE(cpu9krea_buttons),
+};
+
+static struct platform_device cpu9krea_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &cpu9krea_button_data,
+	}
+};
+
+static void __init cpu9krea_add_device_buttons(void)
+{
+	at91_set_gpio_input(AT91_PIN_PC3, 1);	/* BP1 */
+	at91_set_deglitch(AT91_PIN_PC3, 1);
+	at91_set_gpio_input(AT91_PIN_PB20, 1);	/* BP2 */
+	at91_set_deglitch(AT91_PIN_PB20, 1);
+
+	platform_device_register(&cpu9krea_button_device);
+}
+#else
+static void __init cpu9krea_add_device_buttons(void)
+{
+}
+#endif
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata cpu9krea_mmc_data = {
+	.slot_b		= 0,
+	.wire4		= 1,
+	.det_pin	= AT91_PIN_PA29,
+};
+
+static void __init cpu9krea_board_init(void)
+{
+	/* NOR */
+	cpu9krea_add_device_nor();
+	/* Serial */
+	at91_add_device_serial();
+	/* USB Host */
+	at91_add_device_usbh(&cpu9krea_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&cpu9krea_udc_data);
+	/* NAND */
+	cpu9krea_add_device_nand();
+	/* Ethernet */
+	at91_add_device_eth(&cpu9krea_macb_data);
+	/* MMC */
+	at91_add_device_mmc(0, &cpu9krea_mmc_data);
+	/* I2C */
+	at91_add_device_i2c(cpu9krea_i2c_devices,
+		ARRAY_SIZE(cpu9krea_i2c_devices));
+	/* LEDs */
+	at91_gpio_leds(cpu9krea_leds, ARRAY_SIZE(cpu9krea_leds));
+	/* Push Buttons */
+	cpu9krea_add_device_buttons();
+}
+
+#ifdef CONFIG_MACH_CPU9260
+MACHINE_START(CPUAT9260, "Eukrea CPU9260")
+#else
+MACHINE_START(CPUAT9G20, "Eukrea CPU9G20")
+#endif
+	/* Maintainer: Eric Benard - EUKREA Electromatique */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= cpu9krea_map_io,
+	.init_irq	= cpu9krea_init_irq,
+	.init_machine	= cpu9krea_board_init,
+MACHINE_END
-- 
cgit v1.2.3


From 10233a939812450e4fe07cf529585bab5b4d99ec Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Eric=20B=C3=A9nard?= <eric@eukrea.com>
Date: Thu, 30 Jul 2009 07:23:42 +0100
Subject: ARM: 5630/1: Add support for Eukrea's CPUAT91

CPUAT91 is based on Atmel's AT91RM9200 with up to 16MB Strataflash,
up to 128MB SDRAM and an ethernet PHY in RMII mode.

Signed-off-by: Eric Benard <ebenard@eukrea.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/configs/cpuat91_defconfig | 1316 ++++++++++++++++++++++++++++++++++++
 arch/arm/mach-at91/Kconfig         |    7 +
 arch/arm/mach-at91/Makefile        |    1 +
 arch/arm/mach-at91/board-cpuat91.c |  185 +++++
 4 files changed, 1509 insertions(+)
 create mode 100644 arch/arm/configs/cpuat91_defconfig
 create mode 100644 arch/arm/mach-at91/board-cpuat91.c

(limited to 'arch/arm')

diff --git a/arch/arm/configs/cpuat91_defconfig b/arch/arm/configs/cpuat91_defconfig
new file mode 100644
index 00000000000..4901827253f
--- /dev/null
+++ b/arch/arm/configs/cpuat91_defconfig
@@ -0,0 +1,1316 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc3
+# Tue Jul 14 14:45:01 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+CONFIG_ARCH_AT91RM9200=y
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91RM9200 Board Type
+#
+# CONFIG_MACH_ONEARM is not set
+# CONFIG_ARCH_AT91RM9200DK is not set
+# CONFIG_MACH_AT91RM9200EK is not set
+# CONFIG_MACH_CSB337 is not set
+# CONFIG_MACH_CSB637 is not set
+# CONFIG_MACH_CARMEVA is not set
+# CONFIG_MACH_ATEB9200 is not set
+# CONFIG_MACH_KB9200 is not set
+# CONFIG_MACH_PICOTUX2XX is not set
+# CONFIG_MACH_KAFA is not set
+# CONFIG_MACH_ECBAT91 is not set
+# CONFIG_MACH_YL9200 is not set
+CONFIG_MACH_CPUAT91=y
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_PLATRAM=y
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_ARM_AT91_ETHER=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91RM9200_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_AT91RM9200 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 83a89720ada..a24d824c428 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -156,6 +156,13 @@ config MACH_YL9200
 	help
 	  Select this if you are using the ucDragon YL-9200 board.
 
+config MACH_CPUAT91
+	bool "Eukrea CPUAT91"
+	depends on ARCH_AT91RM9200
+	help
+	  Select this if you are using the Eukrea Electromatique's
+	  CPUAT91 board <http://www.eukrea.com/>.
+
 endif
 
 # ----------------------------------------------------------
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index b2ea2e5a881..a6ed015d82e 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_MACH_KAFA)		+= board-kafa.o
 obj-$(CONFIG_MACH_PICOTUX2XX)	+= board-picotux200.o
 obj-$(CONFIG_MACH_ECBAT91)	+= board-ecbat91.o
 obj-$(CONFIG_MACH_YL9200)	+= board-yl-9200.o
+obj-$(CONFIG_MACH_CPUAT91)	+= board-cpuat91.o
 
 # AT91SAM9260 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
new file mode 100644
index 00000000000..a28d9965619
--- /dev/null
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -0,0 +1,185 @@
+/*
+ * linux/arch/arm/mach-at91/board-cpuat91.c
+ *
+ *  Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/plat-ram.h>
+
+#include <mach/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200_mc.h>
+
+#include "generic.h"
+
+static struct gpio_led cpuat91_leds[] = {
+	{
+		.name			= "led1",
+		.default_trigger	= "heartbeat",
+		.active_low		= 1,
+		.gpio			= AT91_PIN_PC0,
+	},
+};
+
+static void __init cpuat91_map_io(void)
+{
+	/* Initialize processor: 18.432 MHz crystal */
+	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS |
+		ATMEL_UART_RTS);
+
+	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS |
+		ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
+		ATMEL_UART_DCD | ATMEL_UART_RI);
+
+	/* USART2 on ttyS3 (Rx, Tx) */
+	at91_register_uart(AT91RM9200_ID_US2, 3, 0);
+
+	/* USART3 on ttyS4 (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_CTS |
+		ATMEL_UART_RTS);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init cpuat91_init_irq(void)
+{
+	at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata cpuat91_eth_data = {
+	.is_rmii	= 1,
+};
+
+static struct at91_usbh_data __initdata cpuat91_usbh_data = {
+	.ports		= 1,
+};
+
+static struct at91_udc_data __initdata cpuat91_udc_data = {
+	.vbus_pin	= AT91_PIN_PC15,
+	.pullup_pin	= AT91_PIN_PC14,
+};
+
+static struct at91_mmc_data __initdata cpuat91_mmc_data = {
+	.det_pin	= AT91_PIN_PC2,
+	.wire4		= 1,
+};
+
+static struct physmap_flash_data cpuat91_flash_data = {
+	.width		= 2,
+};
+
+static struct resource cpuat91_flash_resource = {
+	.start		= AT91_CHIPSELECT_0,
+	.end		= AT91_CHIPSELECT_0 + SZ_16M - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device cpuat91_norflash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev	= {
+		.platform_data	= &cpuat91_flash_data,
+	},
+	.resource	= &cpuat91_flash_resource,
+	.num_resources	= 1,
+};
+
+#ifdef CONFIG_MTD_PLATRAM
+struct platdata_mtd_ram at91_sram_pdata = {
+	.mapname	= "SRAM",
+	.bankwidth	= 2,
+};
+
+static struct resource at91_sram_resource[] = {
+	[0] = {
+		.start = AT91RM9200_SRAM_BASE,
+		.end   = AT91RM9200_SRAM_BASE + AT91RM9200_SRAM_SIZE - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device at91_sram = {
+	.name		= "mtd-ram",
+	.id		= 0,
+	.resource	= at91_sram_resource,
+	.num_resources	= ARRAY_SIZE(at91_sram_resource),
+	.dev	= {
+		.platform_data = &at91_sram_pdata,
+	},
+};
+#endif /* MTD_PLATRAM */
+
+static struct platform_device *platform_devices[] __initdata = {
+	&cpuat91_norflash,
+#ifdef CONFIG_MTD_PLATRAM
+	&at91_sram,
+#endif /* CONFIG_MTD_PLATRAM */
+};
+
+static void __init cpuat91_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* LEDs. */
+	at91_gpio_leds(cpuat91_leds, ARRAY_SIZE(cpuat91_leds));
+	/* Ethernet */
+	at91_add_device_eth(&cpuat91_eth_data);
+	/* USB Host */
+	at91_add_device_usbh(&cpuat91_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&cpuat91_udc_data);
+	/* MMC */
+	at91_add_device_mmc(0, &cpuat91_mmc_data);
+	/* I2C */
+	at91_add_device_i2c(NULL, 0);
+	/* Platform devices */
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+MACHINE_START(CPUAT91, "Eukrea")
+	/* Maintainer: Eric Benard - EUKREA Electromatique */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91rm9200_timer,
+	.map_io		= cpuat91_map_io,
+	.init_irq	= cpuat91_init_irq,
+	.init_machine	= cpuat91_board_init,
+MACHINE_END
-- 
cgit v1.2.3


From b0e66522f4d86713b0450255210e26c4f11ee86b Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:20 +0100
Subject: ARM: S3C24XX: Add BWSCON per-bank information.

Add definitions and an accessor macro to deal with
reading bus information from S3C2410_BWSCON for any
given numbered bank.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/include/mach/regs-mem.h | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s3c2410/include/mach/regs-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
index 57759804e2f..7f7c5294796 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-mem.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
@@ -73,6 +73,16 @@
 #define S3C2410_BWSCON_WS7		(1<<30)
 #define S3C2410_BWSCON_ST7		(1<<31)
 
+/* accesor functions for getting BANK(n) configuration. (n != 0) */
+
+#define S3C2410_BWSCON_GET(_bwscon, _bank) (((_bwscon) >> ((_bank) * 4)) & 0xf)
+
+#define S3C2410_BWSCON_DW8		(0)
+#define S3C2410_BWSCON_DW16		(1)
+#define S3C2410_BWSCON_DW32		(2)
+#define S3C2410_BWSCON_WS		(1 << 2)
+#define S3C2410_BWSCON_ST		(1 << 3)
+
 /* memory set (rom, ram) */
 #define S3C2410_BANKCON0		S3C2410_MEMREG(0x0004)
 #define S3C2410_BANKCON1		S3C2410_MEMREG(0x0008)
-- 
cgit v1.2.3


From 2e4ea6e8209e0c1d93c69c34c32002337b3f747e Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:21 +0100
Subject: ARM: S3C24XX: CPUFREQ: Add core support.

Add the core of the support for enabling the CPUFreq driver on
all S3C24XX based systems.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/Makefile                     |   2 +
 arch/arm/plat-s3c24xx/cpu-freq.c                   | 704 +++++++++++++++++++++
 arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h | 183 ++++++
 3 files changed, 889 insertions(+)
 create mode 100644 arch/arm/plat-s3c24xx/cpu-freq.c
 create mode 100644 arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 579a165c282..1f6add552bd 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -20,6 +20,8 @@ obj-y				+= gpiolib.o
 obj-y				+= clock.o
 obj-$(CONFIG_S3C24XX_DCLK)	+= clock-dclk.o
 
+obj-$(CONFIG_CPU_FREQ_S3C24XX)	+= cpu-freq.o
+
 # Architecture dependant builds
 
 obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o
diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/plat-s3c24xx/cpu-freq.c
new file mode 100644
index 00000000000..40ff7e2569d
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/cpu-freq.c
@@ -0,0 +1,704 @@
+/* linux/arch/arm/plat-s3c24xx/cpu-freq.c
+ *
+ * Copyright (c) 2006,2007,2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/cpu.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/kobject.h>
+#include <linux/sysfs.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu-freq-core.h>
+
+#include <mach/regs-clock.h>
+
+/* note, cpufreq support deals in kHz, no Hz */
+
+static struct cpufreq_driver s3c24xx_driver;
+static struct s3c_cpufreq_config cpu_cur;
+static struct s3c_iotimings s3c24xx_iotiming;
+static struct cpufreq_frequency_table *pll_reg;
+static unsigned int last_target = ~0;
+static unsigned int ftab_size;
+static struct cpufreq_frequency_table *ftab;
+
+static struct clk *_clk_mpll;
+static struct clk *_clk_xtal;
+static struct clk *clk_fclk;
+static struct clk *clk_hclk;
+static struct clk *clk_pclk;
+static struct clk *clk_arm;
+
+static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg)
+{
+	unsigned long fclk, pclk, hclk, armclk;
+
+	cfg->freq.fclk = fclk = clk_get_rate(clk_fclk);
+	cfg->freq.hclk = hclk = clk_get_rate(clk_hclk);
+	cfg->freq.pclk = pclk = clk_get_rate(clk_pclk);
+	cfg->freq.armclk = armclk = clk_get_rate(clk_arm);
+
+	cfg->pll.index = __raw_readl(S3C2410_MPLLCON);
+	cfg->pll.frequency = fclk;
+
+	cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
+
+	cfg->divs.h_divisor = fclk / hclk;
+	cfg->divs.p_divisor = fclk / pclk;
+}
+
+static inline void s3c_cpufreq_calc(struct s3c_cpufreq_config *cfg)
+{
+	unsigned long pll = cfg->pll.frequency;
+
+	cfg->freq.fclk = pll;
+	cfg->freq.hclk = pll / cfg->divs.h_divisor;
+	cfg->freq.pclk = pll / cfg->divs.p_divisor;
+
+	/* convert hclk into 10ths of nanoseconds for io calcs */
+	cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
+}
+
+static inline int closer(unsigned int target, unsigned int n, unsigned int c)
+{
+	int diff_cur = abs(target - c);
+	int diff_new = abs(target - n);
+
+	return (diff_new < diff_cur);
+}
+
+static void s3c_cpufreq_show(const char *pfx,
+				 struct s3c_cpufreq_config *cfg)
+{
+	s3c_freq_dbg("%s: Fvco=%u, F=%lu, A=%lu, H=%lu (%u), P=%lu (%u)\n",
+		     pfx, cfg->pll.frequency, cfg->freq.fclk, cfg->freq.armclk,
+		     cfg->freq.hclk, cfg->divs.h_divisor,
+		     cfg->freq.pclk, cfg->divs.p_divisor);
+}
+
+/* functions to wrapper the driver info calls to do the cpu specific work */
+
+static void s3c_cpufreq_setio(struct s3c_cpufreq_config *cfg)
+{
+	if (cfg->info->set_iotiming)
+		(cfg->info->set_iotiming)(cfg, &s3c24xx_iotiming);
+}
+
+static int s3c_cpufreq_calcio(struct s3c_cpufreq_config *cfg)
+{
+	if (cfg->info->calc_iotiming)
+		return (cfg->info->calc_iotiming)(cfg, &s3c24xx_iotiming);
+
+	return 0;
+}
+
+static void s3c_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+	(cfg->info->set_refresh)(cfg);
+}
+
+static void s3c_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+	(cfg->info->set_divs)(cfg);
+}
+
+static int s3c_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+	return (cfg->info->calc_divs)(cfg);
+}
+
+static void s3c_cpufreq_setfvco(struct s3c_cpufreq_config *cfg)
+{
+	(cfg->info->set_fvco)(cfg);
+}
+
+static inline void s3c_cpufreq_resume_clocks(void)
+{
+	cpu_cur.info->resume_clocks();
+}
+
+static inline void s3c_cpufreq_updateclk(struct clk *clk,
+					 unsigned int freq)
+{
+	clk_set_rate(clk, freq);
+}
+
+static int s3c_cpufreq_settarget(struct cpufreq_policy *policy,
+				 unsigned int target_freq,
+				 struct cpufreq_frequency_table *pll)
+{
+	struct s3c_cpufreq_freqs freqs;
+	struct s3c_cpufreq_config cpu_new;
+	unsigned long flags;
+
+	cpu_new = cpu_cur;  /* copy new from current */
+
+	s3c_cpufreq_show("cur", &cpu_cur);
+
+	/* TODO - check for DMA currently outstanding */
+
+	cpu_new.pll = pll ? *pll : cpu_cur.pll;
+
+	if (pll)
+		freqs.pll_changing = 1;
+
+	/* update our frequencies */
+
+	cpu_new.freq.armclk = target_freq;
+	cpu_new.freq.fclk = cpu_new.pll.frequency;
+
+	if (s3c_cpufreq_calcdivs(&cpu_new) < 0) {
+		printk(KERN_ERR "no divisors for %d\n", target_freq);
+		goto err_notpossible;
+	}
+
+	s3c_freq_dbg("%s: got divs\n", __func__);
+
+	s3c_cpufreq_calc(&cpu_new);
+
+	s3c_freq_dbg("%s: calculated frequencies for new\n", __func__);
+
+	if (cpu_new.freq.hclk != cpu_cur.freq.hclk) {
+		if (s3c_cpufreq_calcio(&cpu_new) < 0) {
+			printk(KERN_ERR "%s: no IO timings\n", __func__);
+			goto err_notpossible;
+		}
+	}
+
+	s3c_cpufreq_show("new", &cpu_new);
+
+	/* setup our cpufreq parameters */
+
+	freqs.old = cpu_cur.freq;
+	freqs.new = cpu_new.freq;
+
+	freqs.freqs.cpu = 0;
+	freqs.freqs.old = cpu_cur.freq.armclk / 1000;
+	freqs.freqs.new = cpu_new.freq.armclk / 1000;
+
+	/* update f/h/p clock settings before we issue the change
+	 * notification, so that drivers do not need to do anything
+	 * special if they want to recalculate on CPUFREQ_PRECHANGE. */
+
+	s3c_cpufreq_updateclk(_clk_mpll, cpu_new.pll.frequency);
+	s3c_cpufreq_updateclk(clk_fclk, cpu_new.freq.fclk);
+	s3c_cpufreq_updateclk(clk_hclk, cpu_new.freq.hclk);
+	s3c_cpufreq_updateclk(clk_pclk, cpu_new.freq.pclk);
+
+	/* start the frequency change */
+
+	if (policy)
+		cpufreq_notify_transition(&freqs.freqs, CPUFREQ_PRECHANGE);
+
+	/* If hclk is staying the same, then we do not need to
+	 * re-write the IO or the refresh timings whilst we are changing
+	 * speed. */
+
+	local_irq_save(flags);
+
+	/* is our memory clock slowing down? */
+	if (cpu_new.freq.hclk < cpu_cur.freq.hclk) {
+		s3c_cpufreq_setrefresh(&cpu_new);
+		s3c_cpufreq_setio(&cpu_new);
+	}
+
+	if (cpu_new.freq.fclk == cpu_cur.freq.fclk) {
+		/* not changing PLL, just set the divisors */
+
+		s3c_cpufreq_setdivs(&cpu_new);
+	} else {
+		if (cpu_new.freq.fclk < cpu_cur.freq.fclk) {
+			/* slow the cpu down, then set divisors */
+
+			s3c_cpufreq_setfvco(&cpu_new);
+			s3c_cpufreq_setdivs(&cpu_new);
+		} else {
+			/* set the divisors, then speed up */
+
+			s3c_cpufreq_setdivs(&cpu_new);
+			s3c_cpufreq_setfvco(&cpu_new);
+		}
+	}
+
+	/* did our memory clock speed up */
+	if (cpu_new.freq.hclk > cpu_cur.freq.hclk) {
+		s3c_cpufreq_setrefresh(&cpu_new);
+		s3c_cpufreq_setio(&cpu_new);
+	}
+
+	/* update our current settings */
+	cpu_cur = cpu_new;
+
+	local_irq_restore(flags);
+
+	/* notify everyone we've done this */
+	if (policy)
+		cpufreq_notify_transition(&freqs.freqs, CPUFREQ_POSTCHANGE);
+
+	s3c_freq_dbg("%s: finished\n", __func__);
+	return 0;
+
+ err_notpossible:
+	printk(KERN_ERR "no compatible settings for %d\n", target_freq);
+	return -EINVAL;
+}
+
+/* s3c_cpufreq_target
+ *
+ * called by the cpufreq core to adjust the frequency that the CPU
+ * is currently running at.
+ */
+
+static int s3c_cpufreq_target(struct cpufreq_policy *policy,
+			      unsigned int target_freq,
+			      unsigned int relation)
+{
+	struct cpufreq_frequency_table *pll;
+	unsigned int index;
+
+	/* avoid repeated calls which cause a needless amout of duplicated
+	 * logging output (and CPU time as the calculation process is
+	 * done) */
+	if (target_freq == last_target)
+		return 0;
+
+	last_target = target_freq;
+
+	s3c_freq_dbg("%s: policy %p, target %u, relation %u\n",
+		     __func__, policy, target_freq, relation);
+
+	if (ftab) {
+		if (cpufreq_frequency_table_target(policy, ftab,
+						   target_freq, relation,
+						   &index)) {
+			s3c_freq_dbg("%s: table failed\n", __func__);
+			return -EINVAL;
+		}
+
+		s3c_freq_dbg("%s: adjust %d to entry %d (%u)\n", __func__,
+			     target_freq, index, ftab[index].frequency);
+		target_freq = ftab[index].frequency;
+	}
+
+	target_freq *= 1000;  /* convert target to Hz */
+
+	/* find the settings for our new frequency */
+
+	if (!pll_reg || cpu_cur.lock_pll) {
+		/* either we've not got any PLL values, or we've locked
+		 * to the current one. */
+		pll = NULL;
+	} else {
+		struct cpufreq_policy tmp_policy;
+		int ret;
+
+		/* we keep the cpu pll table in Hz, to ensure we get an
+		 * accurate value for the PLL output. */
+
+		tmp_policy.min = policy->min * 1000;
+		tmp_policy.max = policy->max * 1000;
+		tmp_policy.cpu = policy->cpu;
+
+		/* cpufreq_frequency_table_target uses a pointer to 'index'
+		 * which is the number of the table entry, not the value of
+		 * the table entry's index field. */
+
+		ret = cpufreq_frequency_table_target(&tmp_policy, pll_reg,
+						     target_freq, relation,
+						     &index);
+
+		if (ret < 0) {
+			printk(KERN_ERR "%s: no PLL available\n", __func__);
+			goto err_notpossible;
+		}
+
+		pll = pll_reg + index;
+
+		s3c_freq_dbg("%s: target %u => %u\n",
+			     __func__, target_freq, pll->frequency);
+
+		target_freq = pll->frequency;
+	}
+
+	return s3c_cpufreq_settarget(policy, target_freq, pll);
+
+ err_notpossible:
+	printk(KERN_ERR "no compatible settings for %d\n", target_freq);
+	return -EINVAL;
+}
+
+static unsigned int s3c_cpufreq_get(unsigned int cpu)
+{
+	return clk_get_rate(clk_arm) / 1000;
+}
+
+struct clk *s3c_cpufreq_clk_get(struct device *dev, const char *name)
+{
+	struct clk *clk;
+
+	clk = clk_get(dev, name);
+	if (IS_ERR(clk))
+		printk(KERN_ERR "cpufreq: failed to get clock '%s'\n", name);
+
+	return clk;
+}
+
+static int s3c_cpufreq_init(struct cpufreq_policy *policy)
+{
+	printk(KERN_INFO "%s: initialising policy %p\n", __func__, policy);
+
+	if (policy->cpu != 0)
+		return -EINVAL;
+
+	policy->cur = s3c_cpufreq_get(0);
+	policy->min = policy->cpuinfo.min_freq = 0;
+	policy->max = policy->cpuinfo.max_freq = cpu_cur.info->max.fclk / 1000;
+	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+
+	/* feed the latency information from the cpu driver */
+	policy->cpuinfo.transition_latency = cpu_cur.info->latency;
+
+	if (ftab)
+		cpufreq_frequency_table_cpuinfo(policy, ftab);
+
+	return 0;
+}
+
+static __init int s3c_cpufreq_initclks(void)
+{
+	_clk_mpll = s3c_cpufreq_clk_get(NULL, "mpll");
+	_clk_xtal = s3c_cpufreq_clk_get(NULL, "xtal");
+	clk_fclk = s3c_cpufreq_clk_get(NULL, "fclk");
+	clk_hclk = s3c_cpufreq_clk_get(NULL, "hclk");
+	clk_pclk = s3c_cpufreq_clk_get(NULL, "pclk");
+	clk_arm = s3c_cpufreq_clk_get(NULL, "armclk");
+
+	if (IS_ERR(clk_fclk) || IS_ERR(clk_hclk) || IS_ERR(clk_pclk) ||
+	    IS_ERR(_clk_mpll) || IS_ERR(clk_arm) || IS_ERR(_clk_xtal)) {
+		printk(KERN_ERR "%s: could not get clock(s)\n", __func__);
+		return -ENOENT;
+	}
+
+	printk(KERN_INFO "%s: clocks f=%lu,h=%lu,p=%lu,a=%lu\n", __func__,
+	       clk_get_rate(clk_fclk) / 1000,
+	       clk_get_rate(clk_hclk) / 1000,
+	       clk_get_rate(clk_pclk) / 1000,
+	       clk_get_rate(clk_arm) / 1000);
+
+	return 0;
+}
+
+static int s3c_cpufreq_verify(struct cpufreq_policy *policy)
+{
+	if (policy->cpu != 0)
+		return -EINVAL;
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static struct cpufreq_frequency_table suspend_pll;
+static unsigned int suspend_freq;
+
+static int s3c_cpufreq_suspend(struct cpufreq_policy *policy, pm_message_t pmsg)
+{
+	suspend_pll.frequency = clk_get_rate(_clk_mpll);
+	suspend_pll.index = __raw_readl(S3C2410_MPLLCON);
+	suspend_freq = s3c_cpufreq_get(0) * 1000;
+
+	return 0;
+}
+
+static int s3c_cpufreq_resume(struct cpufreq_policy *policy)
+{
+	int ret;
+
+	s3c_freq_dbg("%s: resuming with policy %p\n", __func__, policy);
+
+	last_target = ~0;	/* invalidate last_target setting */
+
+	/* first, find out what speed we resumed at. */
+	s3c_cpufreq_resume_clocks();
+
+	/* whilst we will be called later on, we try and re-set the
+	 * cpu frequencies as soon as possible so that we do not end
+	 * up resuming devices and then immediatley having to re-set
+	 * a number of settings once these devices have restarted.
+	 *
+	 * as a note, it is expected devices are not used until they
+	 * have been un-suspended and at that time they should have
+	 * used the updated clock settings.
+	 */
+
+	ret = s3c_cpufreq_settarget(NULL, suspend_freq, &suspend_pll);
+	if (ret) {
+		printk(KERN_ERR "%s: failed to reset pll/freq\n", __func__);
+		return ret;
+	}
+
+	return 0;
+}
+#else
+#define s3c_cpufreq_resume NULL
+#define s3c_cpufreq_suspend NULL
+#endif
+
+static struct cpufreq_driver s3c24xx_driver = {
+	.flags		= CPUFREQ_STICKY,
+	.verify		= s3c_cpufreq_verify,
+	.target		= s3c_cpufreq_target,
+	.get		= s3c_cpufreq_get,
+	.init		= s3c_cpufreq_init,
+	.suspend	= s3c_cpufreq_suspend,
+	.resume		= s3c_cpufreq_resume,
+	.name		= "s3c24xx",
+};
+
+
+int __init s3c_cpufreq_register(struct s3c_cpufreq_info *info)
+{
+	if (!info || !info->name) {
+		printk(KERN_ERR "%s: failed to pass valid information\n",
+		       __func__);
+		return -EINVAL;
+	}
+
+	printk(KERN_INFO "S3C24XX CPU Frequency driver, %s cpu support\n",
+	       info->name);
+
+	/* check our driver info has valid data */
+
+	BUG_ON(info->set_refresh == NULL);
+	BUG_ON(info->set_divs == NULL);
+	BUG_ON(info->calc_divs == NULL);
+
+	/* info->set_fvco is optional, depending on whether there
+	 * is a need to set the clock code. */
+
+	cpu_cur.info = info;
+
+	/* Note, driver registering should probably update locktime */
+
+	return 0;
+}
+
+int __init s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
+{
+	struct s3c_cpufreq_board *ours;
+
+	if (!board) {
+		printk(KERN_INFO "%s: no board data\n", __func__);
+		return -EINVAL;
+	}
+
+	/* Copy the board information so that each board can make this
+	 * initdata. */
+
+	ours = kzalloc(sizeof(struct s3c_cpufreq_board), GFP_KERNEL);
+	if (ours == NULL) {
+		printk(KERN_ERR "%s: no memory\n", __func__);
+		return -ENOMEM;
+	}
+
+	*ours = *board;
+	cpu_cur.board = ours;
+
+	return 0;
+}
+
+int __init s3c_cpufreq_auto_io(void)
+{
+	int ret;
+
+	if (!cpu_cur.info->get_iotiming) {
+		printk(KERN_ERR "%s: get_iotiming undefined\n", __func__);
+		return -ENOENT;
+	}
+
+	printk(KERN_INFO "%s: working out IO settings\n", __func__);
+
+	ret = (cpu_cur.info->get_iotiming)(&cpu_cur, &s3c24xx_iotiming);
+	if (ret)
+		printk(KERN_ERR "%s: failed to get timings\n", __func__);
+
+	return ret;
+}
+
+/* if one or is zero, then return the other, otherwise return the min */
+#define do_min(_a, _b) ((_a) == 0 ? (_b) : (_b) == 0 ? (_a) : min(_a, _b))
+
+/**
+ * s3c_cpufreq_freq_min - find the minimum settings for the given freq.
+ * @dst: The destination structure
+ * @a: One argument.
+ * @b: The other argument.
+ *
+ * Create a minimum of each frequency entry in the 'struct s3c_freq',
+ * unless the entry is zero when it is ignored and the non-zero argument
+ * used.
+ */
+static void s3c_cpufreq_freq_min(struct s3c_freq *dst,
+				 struct s3c_freq *a, struct s3c_freq *b)
+{
+	dst->fclk = do_min(a->fclk, b->fclk);
+	dst->hclk = do_min(a->hclk, b->hclk);
+	dst->pclk = do_min(a->pclk, b->pclk);
+	dst->armclk = do_min(a->armclk, b->armclk);
+}
+
+static inline u32 calc_locktime(u32 freq, u32 time_us)
+{
+	u32 result;
+
+	result = freq * time_us;
+	result = DIV_ROUND_UP(result, 1000 * 1000);
+
+	return result;
+}
+
+static void s3c_cpufreq_update_loctkime(void)
+{
+	unsigned int bits = cpu_cur.info->locktime_bits;
+	u32 rate = (u32)clk_get_rate(_clk_xtal);
+	u32 val;
+
+	if (bits == 0) {
+		WARN_ON(1);
+		return;
+	}
+
+	val = calc_locktime(rate, cpu_cur.info->locktime_u) << bits;
+	val |= calc_locktime(rate, cpu_cur.info->locktime_m);
+
+	printk(KERN_INFO "%s: new locktime is 0x%08x\n", __func__, val);
+	__raw_writel(val, S3C2410_LOCKTIME);
+}
+
+static int s3c_cpufreq_build_freq(void)
+{
+	int size, ret;
+
+	if (!cpu_cur.info->calc_freqtable)
+		return -EINVAL;
+
+	kfree(ftab);
+	ftab = NULL;
+
+	size = cpu_cur.info->calc_freqtable(&cpu_cur, NULL, 0);
+	size++;
+
+	ftab = kmalloc(sizeof(struct cpufreq_frequency_table) * size, GFP_KERNEL);
+	if (!ftab) {
+		printk(KERN_ERR "%s: no memory for tables\n", __func__);
+		return -ENOMEM;
+	}
+
+	ftab_size = size;
+
+	ret = cpu_cur.info->calc_freqtable(&cpu_cur, ftab, size);
+	s3c_cpufreq_addfreq(ftab, ret, size, CPUFREQ_TABLE_END);
+
+	return 0;
+}
+
+static int __init s3c_cpufreq_initcall(void)
+{
+	int ret = 0;
+
+	if (cpu_cur.info && cpu_cur.board) {
+		ret = s3c_cpufreq_initclks();
+		if (ret)
+			goto out;
+
+		/* get current settings */
+		s3c_cpufreq_getcur(&cpu_cur);
+		s3c_cpufreq_show("cur", &cpu_cur);
+
+		if (cpu_cur.board->auto_io) {
+			ret = s3c_cpufreq_auto_io();
+			if (ret) {
+				printk(KERN_ERR "%s: failed to get io timing\n",
+				       __func__);
+				goto out;
+			}
+		}
+
+		if (cpu_cur.board->need_io && !cpu_cur.info->set_iotiming) {
+			printk(KERN_ERR "%s: no IO support registered\n",
+			       __func__);
+			ret = -EINVAL;
+			goto out;
+		}
+
+		if (!cpu_cur.info->need_pll)
+			cpu_cur.lock_pll = 1;
+
+		s3c_cpufreq_update_loctkime();
+
+		s3c_cpufreq_freq_min(&cpu_cur.max, &cpu_cur.board->max,
+				     &cpu_cur.info->max);
+
+		if (cpu_cur.info->calc_freqtable)
+			s3c_cpufreq_build_freq();
+
+		ret = cpufreq_register_driver(&s3c24xx_driver);
+	}
+
+ out:
+	return ret;
+}
+
+late_initcall(s3c_cpufreq_initcall);
+
+/**
+ * s3c_plltab_register - register CPU PLL table.
+ * @plls: The list of PLL entries.
+ * @plls_no: The size of the PLL entries @plls.
+ *
+ * Register the given set of PLLs with the system.
+ */
+int __init s3c_plltab_register(struct cpufreq_frequency_table *plls,
+			       unsigned int plls_no)
+{
+	struct cpufreq_frequency_table *vals;
+	unsigned int size;
+
+	size = sizeof(struct cpufreq_frequency_table) * (plls_no + 1);
+
+	vals = kmalloc(size, GFP_KERNEL);
+	if (vals) {
+		memcpy(vals, plls, size);
+		pll_reg = vals;
+
+		/* write a terminating entry, we don't store it in the
+		 * table that is stored in the kernel */
+		vals += plls_no;
+		vals->frequency = CPUFREQ_TABLE_END;
+
+		printk(KERN_INFO "cpufreq: %d PLL entries\n", plls_no);
+	} else
+		printk(KERN_ERR "cpufreq: no memory for PLL tables\n");
+
+	return vals ? 0 : -ENOMEM;
+}
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
new file mode 100644
index 00000000000..e078821b360
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
@@ -0,0 +1,183 @@
+/* arch/arm/plat-s3c/include/plat/cpu-freq.h
+ *
+ * Copyright (c) 2006,2007,2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C CPU frequency scaling support - core support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/cpu-freq.h>
+
+#define MAX_BANKS (8)
+#define S3C2412_MAX_IO	(8)
+
+/**
+ * struct s3c2410_iobank_timing - IO bank timings for S3C2410 style timings
+ * @bankcon: The cached version of settings in this structure.
+ * @tacp:
+ * @tacs: Time from address valid to nCS asserted.
+ * @tcos: Time from nCS asserted to nOE or nWE asserted.
+ * @tacc: Time that nOE or nWE is asserted.
+ * @tcoh: Time nCS is held after nOE or nWE are released.
+ * @tcah: Time address is held for after
+ * @nwait_en: Whether nWAIT is enabled for this bank.
+ *
+ * This structure represents the IO timings for a S3C2410 style IO bank
+ * used by the CPU frequency support if it needs to change the settings
+ * of the IO.
+ */
+struct s3c2410_iobank_timing {
+	unsigned long	bankcon;
+	unsigned int	tacp;
+	unsigned int	tacs;
+	unsigned int	tcos;
+	unsigned int	tacc;
+	unsigned int	tcoh;		/* nCS hold afrer nOE/nWE */
+	unsigned int	tcah;		/* Address hold after nCS */
+	unsigned char	nwait_en;	/* nWait enabled for bank. */
+};
+
+union s3c_iobank {
+	  struct s3c2410_iobank_timing	*io_2410;
+};
+
+/**
+ * struct s3c_iotimings - Chip IO timings holder
+ * @bank: The timings for each IO bank.
+ */
+struct s3c_iotimings {
+	union s3c_iobank	bank[MAX_BANKS];
+};
+
+/**
+ * struct s3c_plltab - PLL table information.
+ * @vals: List of PLL values.
+ * @size: Size of the PLL table @vals.
+ */
+struct s3c_plltab {
+	struct s3c_pllval	*vals;
+	int			 size;
+};
+
+/**
+ * struct s3c_cpufreq_info - Information for the CPU frequency driver.
+ * @name: The name of this implementation.
+ * @max: The maximum frequencies for the system.
+ * @latency: Transition latency to give to cpufreq.
+ * @locktime_m: The lock-time in uS for the MPLL.
+ * @locktime_u: The lock-time in uS for the UPLL.
+ * @locttime_bits: The number of bits each LOCKTIME field.
+ * @need_pll: Set if this driver needs to change the PLL values to acheive
+ *	any frequency changes. This is really only need by devices like the
+ *	S3C2410 where there is no or limited divider between the PLL and the
+ *	ARMCLK.
+ * @resume_clocks: Update the clocks on resume.
+ * @get_iotiming: Get the current IO timing data, mainly for use at start.
+ * @set_iotiming: Update the IO timings from the cached copies calculated
+ *	from the @calc_iotiming entry when changing the frequency.
+ * @calc_iotiming: Calculate and update the cached copies of the IO timings
+ *	from the newly calculated frequencies.
+ * @calc_freqtable: Calculate (fill in) the given frequency table from the
+ *	current frequency configuration. If the table passed in is NULL,
+ *	then the return is the number of elements to be filled for allocation
+ *	of the table.
+ * @set_refresh: Set the memory refresh configuration.
+ * @set_fvco: Set the PLL frequencies.
+ * @set_divs: Update the clock divisors.
+ * @calc_divs: Calculate the clock divisors.
+ */
+struct s3c_cpufreq_info {
+	const char		*name;
+	struct s3c_freq		max;
+
+	unsigned int		latency;
+
+	unsigned int		locktime_m;
+	unsigned int		locktime_u;
+	unsigned char		locktime_bits;
+
+	unsigned int		need_pll:1;
+
+	/* driver routines */
+
+	void		(*resume_clocks)(void);
+
+	int		(*get_iotiming)(struct s3c_cpufreq_config *cfg,
+					struct s3c_iotimings *timings);
+
+	void		(*set_iotiming)(struct s3c_cpufreq_config *cfg,
+					struct s3c_iotimings *timings);
+
+	int		(*calc_iotiming)(struct s3c_cpufreq_config *cfg,
+					 struct s3c_iotimings *timings);
+
+	int		(*calc_freqtable)(struct s3c_cpufreq_config *cfg,
+					  struct cpufreq_frequency_table *t,
+					  size_t table_size);
+
+	void		(*set_refresh)(struct s3c_cpufreq_config *cfg);
+	void		(*set_fvco)(struct s3c_cpufreq_config *cfg);
+	void		(*set_divs)(struct s3c_cpufreq_config *cfg);
+	int		(*calc_divs)(struct s3c_cpufreq_config *cfg);
+};
+
+extern int s3c_cpufreq_register(struct s3c_cpufreq_info *info);
+
+extern int s3c_plltab_register(struct cpufreq_frequency_table *plls, unsigned int plls_no);
+
+/* Useful utility functions. */
+
+extern struct clk *s3c_cpufreq_clk_get(struct device *, const char *);
+
+/* S3C2410 and compatible exported functions */
+
+extern void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg);
+
+extern int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
+				 struct s3c_iotimings *iot);
+
+extern int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
+				struct s3c_iotimings *timings);
+
+extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
+				 struct s3c_iotimings *iot);
+
+extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg);
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG
+#define s3c_freq_dbg(x...) printk(KERN_INFO x)
+#else
+#define s3c_freq_dbg(x...) do { if (0) printk(x); } while (0)
+#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUG */
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_IODEBUG
+#define s3c_freq_iodbg(x...) printk(KERN_INFO x)
+#else
+#define s3c_freq_iodbg(x...) do { if (0) printk(x); } while (0)
+#endif /* CONFIG_CPU_FREQ_S3C24XX_IODEBUG */
+
+static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table,
+				      int index, size_t table_size,
+				      unsigned int freq)
+{
+	if (index < 0)
+		return index;
+
+	if (table) {
+		if (index >= table_size)
+			return -ENOMEM;
+
+		s3c_freq_dbg("%s: { %d = %u kHz }\n",
+			     __func__, index, freq);
+
+		table[index].index = index;
+		table[index].frequency = freq;
+	}
+
+	return index + 1;
+}
-- 
cgit v1.2.3


From ea5fe9aedf512d20b75b7dcfd54ab99ae5c0934b Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:22 +0100
Subject: ARM: S3C: CPUFREQ: Documentation for cpufreq header

Update arch/arm/plat-s3c/include/plat/cpu-freq.h to include kerneldoc
style documentation.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/include/plat/cpu-freq.h | 91 +++++++++++++++++++++++++++----
 1 file changed, 81 insertions(+), 10 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c/include/plat/cpu-freq.h b/arch/arm/plat-s3c/include/plat/cpu-freq.h
index c86a13307e9..0ba7670fd07 100644
--- a/arch/arm/plat-s3c/include/plat/cpu-freq.h
+++ b/arch/arm/plat-s3c/include/plat/cpu-freq.h
@@ -17,6 +17,21 @@ struct s3c_cpufreq_info;
 struct s3c_cpufreq_board;
 struct s3c_iotimings;
 
+/**
+ * struct s3c_freq - frequency information (mainly for core drivers)
+ * @fclk: The FCLK frequency in Hz.
+ * @armclk: The ARMCLK frequency in Hz.
+ * @hclk_tns: HCLK cycle time in 10ths of nano-seconds.
+ * @hclk: The HCLK frequency in Hz.
+ * @pclk: The PCLK frequency in Hz.
+ *
+ * This contains the frequency information about the current configuration
+ * mainly for the core drivers to ensure we do not end up passing about
+ * a large number of parameters.
+ *
+ * The @hclk_tns field is a useful cache for the parts of the drivers that
+ * need to calculate IO timings and suchlike.
+ */
 struct s3c_freq {
 	unsigned long	fclk;
 	unsigned long	armclk;
@@ -25,33 +40,75 @@ struct s3c_freq {
 	unsigned long	pclk;
 };
 
-/* wrapper 'struct cpufreq_freqs' so that any drivers receiving the
+/**
+ * struct s3c_cpufreq_freqs - s3c cpufreq notification information.
+ * @freqs: The cpufreq setting information.
+ * @old: The old clock settings.
+ * @new: The new clock settings.
+ * @pll_changing: Set if the PLL is changing.
+ *
+ * Wrapper 'struct cpufreq_freqs' so that any drivers receiving the
  * notification can use this information that is not provided by just
  * having the core frequency alone.
+ *
+ * The pll_changing flag is used to indicate if the PLL itself is
+ * being set during this change. This is important as the clocks
+ * will temporarily be set to the XTAL clock during this time, so
+ * drivers may want to close down their output during this time.
+ *
+ * Note, this is not being used by any current drivers and therefore
+ * may be removed in the future.
  */
-
 struct s3c_cpufreq_freqs {
 	struct cpufreq_freqs	freqs;
 	struct s3c_freq		old;
 	struct s3c_freq		new;
+
+	unsigned int		pll_changing:1;
 };
 
 #define to_s3c_cpufreq(_cf) container_of(_cf, struct s3c_cpufreq_freqs, freqs)
 
+/**
+ * struct s3c_clkdivs - clock divisor information
+ * @p_divisor: Divisor from FCLK to PCLK.
+ * @h_divisor: Divisor from FCLK to HCLK.
+ * @arm_divisor: Divisor from FCLK to ARMCLK (not all CPUs).
+ * @dvs: Non-zero if using DVS mode for ARMCLK.
+ *
+ * Divisor settings for the core clocks.
+ */
 struct s3c_clkdivs {
-	int		p_divisor;	/* fclk / pclk */
-	int		h_divisor;	/* fclk / hclk */
-	int		arm_divisor;	/* not all cpus have this. */
-	unsigned char	dvs;		/* using dvs mode to arm. */
+	int		p_divisor;
+	int		h_divisor;
+	int		arm_divisor;
+	unsigned char	dvs;
 };
 
 #define PLLVAL(_m, _p, _s) (((_m) << 12) | ((_p) << 4) | (_s))
 
+/**
+ * struct s3c_pllval - PLL value entry.
+ * @freq: The frequency for this entry in Hz.
+ * @pll_reg: The PLL register setting for this PLL value.
+ */
 struct s3c_pllval {
 	unsigned long		freq;
 	unsigned long		pll_reg;
 };
 
+/**
+ * struct s3c_cpufreq_config - current cpu frequency configuration
+ * @freq: The current settings for the core clocks.
+ * @pll: The PLL table entry for the current PLL settings.
+ * @divs: The divisor settings for the core clocks.
+ * @info: The current core driver information.
+ * @board: The information for the board we are running on.
+ *
+ * This is for the core drivers that need to know information about
+ * the current settings and values. It should not be needed by any
+ * device drivers.
+*/
 struct s3c_cpufreq_config {
 	struct s3c_freq		freq;
 	struct s3c_pllval	pll;
@@ -60,13 +117,27 @@ struct s3c_cpufreq_config {
 	struct s3c_cpufreq_board *board;
 };
 
-/* s3c_cpufreq_board
+/**
+ * struct s3c_cpufreq_board - per-board cpu frequency informatin
+ * @refresh: The SDRAM refresh period in nanoseconds.
+ * @auto_io: Set if the IO timing settings should be generated from the
+ *	initialisation time hardware registers.
+ * @need_io: Set if the board has external IO on any of the chipselect
+ *	lines that will require the hardware timing registers to be
+ *	updated on a clock change.
+ * @max: The maxium frequency limits for the system. Any field that
+ *	is left at zero will use the CPU's settings.
+ *
+ * This contains the board specific settings that affect how the CPU
+ * drivers chose settings. These include the memory refresh and IO
+ * timing information.
  *
- * per-board configuraton information, such as memory refresh and
- * how to initialise IO timings.
+ * Registration depends on the driver being used, the ARMCLK only
+ * implementation does not currently need this but the older style
+ * driver requires this to be available.
  */
 struct s3c_cpufreq_board {
-	unsigned int	refresh;	/* refresh period in ns */
+	unsigned int	refresh;
 	unsigned int	auto_io:1;	/* automatically init io timings. */
 	unsigned int	need_io:1;	/* set if needs io timing support. */
 
-- 
cgit v1.2.3


From d6fc87d3f7d236892e4d0003a07cd2b5171e5e27 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:23 +0100
Subject: ARM: S3C: CPUFREQ: Move struct s3c_cpufreq_config to cpu-freq-core.h

Move the structure s3c_cpufreq_config from cpu-freq.h to the
less advertised cpu-freq-core.h as it is not needed by anything
outside the core drivers.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/include/plat/cpu-freq.h          | 20 -----------------
 arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h | 25 ++++++++++++++++++++++
 2 files changed, 25 insertions(+), 20 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c/include/plat/cpu-freq.h b/arch/arm/plat-s3c/include/plat/cpu-freq.h
index 0ba7670fd07..7b982b7f28c 100644
--- a/arch/arm/plat-s3c/include/plat/cpu-freq.h
+++ b/arch/arm/plat-s3c/include/plat/cpu-freq.h
@@ -97,26 +97,6 @@ struct s3c_pllval {
 	unsigned long		pll_reg;
 };
 
-/**
- * struct s3c_cpufreq_config - current cpu frequency configuration
- * @freq: The current settings for the core clocks.
- * @pll: The PLL table entry for the current PLL settings.
- * @divs: The divisor settings for the core clocks.
- * @info: The current core driver information.
- * @board: The information for the board we are running on.
- *
- * This is for the core drivers that need to know information about
- * the current settings and values. It should not be needed by any
- * device drivers.
-*/
-struct s3c_cpufreq_config {
-	struct s3c_freq		freq;
-	struct s3c_pllval	pll;
-	struct s3c_clkdivs	divs;
-	struct s3c_cpufreq_info *info;	/* for core, not drivers */
-	struct s3c_cpufreq_board *board;
-};
-
 /**
  * struct s3c_cpufreq_board - per-board cpu frequency informatin
  * @refresh: The SDRAM refresh period in nanoseconds.
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
index e078821b360..7938fb0bc38 100644
--- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
@@ -64,6 +64,31 @@ struct s3c_plltab {
 	int			 size;
 };
 
+/**
+ * struct s3c_cpufreq_config - current cpu frequency configuration
+ * @freq: The current settings for the core clocks.
+ * @max: Maxium settings, derived from core, board and user settings.
+ * @pll: The PLL table entry for the current PLL settings.
+ * @divs: The divisor settings for the core clocks.
+ * @info: The current core driver information.
+ * @board: The information for the board we are running on.
+ * @lock_pll: Set if the PLL settings cannot be changed.
+ *
+ * This is for the core drivers that need to know information about
+ * the current settings and values. It should not be needed by any
+ * device drivers.
+*/
+struct s3c_cpufreq_config {
+	struct s3c_freq		freq;
+	struct s3c_freq		max;
+	struct cpufreq_frequency_table pll;
+	struct s3c_clkdivs	divs;
+	struct s3c_cpufreq_info *info;	/* for core, not drivers */
+	struct s3c_cpufreq_board *board;
+
+	unsigned int	lock_pll:1;
+};
+
 /**
  * struct s3c_cpufreq_info - Information for the CPU frequency driver.
  * @name: The name of this implementation.
-- 
cgit v1.2.3


From 89c52ed4687faca6bf0eabf6d46eaee4a14376b3 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:24 +0100
Subject: ARM: Add ARCH_HAS_CPUFREQ for presence of CPUFREQ driver

Add ARCH_HAS_CPUFREQ so that each machine config can select
it if they have CPUFREQ driver support. This means that the
CPUFREQ specific area does not need the if statement updating
each time a new machine is added.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/Kconfig | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aef63c8e3d2..7dbaabd8df3 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -126,6 +126,13 @@ config ARCH_HAS_ILOG2_U32
 config ARCH_HAS_ILOG2_U64
 	bool
 
+config ARCH_HAS_CPUFREQ
+	bool
+	help
+	  Internal node to signify that the ARCH has CPUFREQ support
+	  and that the relevant menu configurations are displayed for
+	  it.
+
 config GENERIC_HWEIGHT
 	bool
 	default y
@@ -203,6 +210,7 @@ config ARCH_AAEC2000
 config ARCH_INTEGRATOR
 	bool "ARM Ltd. Integrator family"
 	select ARM_AMBA
+	select ARCH_HAS_CPUFREQ
 	select HAVE_CLK
 	select COMMON_CLKDEV
 	select ICST525
@@ -509,6 +517,7 @@ config ARCH_PXA
 	bool "PXA2xx/PXA3xx-based"
 	depends on MMU
 	select ARCH_MTD_XIP
+	select ARCH_HAS_CPUFREQ
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select COMMON_CLKDEV
@@ -551,6 +560,7 @@ config ARCH_SA1100
 	select ISA
 	select ARCH_SPARSEMEM_ENABLE
 	select ARCH_MTD_XIP
+	select ARCH_HAS_CPUFREQ
 	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
@@ -573,6 +583,7 @@ config ARCH_S3C64XX
 	bool "Samsung S3C64XX"
 	select GENERIC_GPIO
 	select HAVE_CLK
+	select ARCH_HAS_CPUFREQ
 	help
 	  Samsung S3C64XX series based systems
 
@@ -632,6 +643,7 @@ config ARCH_OMAP
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_HAS_CPUFREQ
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	help
@@ -1241,7 +1253,7 @@ endmenu
 
 menu "CPU Power Management"
 
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_PXA || ARCH_S3C64XX)
+if ARCH_HAS_CPUFREQ
 
 source "drivers/cpufreq/Kconfig"
 
-- 
cgit v1.2.3


From 9d56c02a5a171e1fdb87f3b718b418cb0522d2b1 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:25 +0100
Subject: ARM: Add S3C24XX to CPUFreq KConfig

Add the S3C24XX to the main ARM CPUFreq Kconfig support list.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/Kconfig | 41 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 7dbaabd8df3..c7a83efef0b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -573,6 +573,7 @@ config ARCH_SA1100
 config ARCH_S3C2410
 	bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
 	select GENERIC_GPIO
+	select ARCH_HAS_CPUFREQ
 	select HAVE_CLK
 	help
 	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
@@ -1288,6 +1289,46 @@ config CPU_FREQ_S3C64XX
 	bool "CPUfreq support for Samsung S3C64XX CPUs"
 	depends on CPU_FREQ && CPU_S3C6410
 
+config CPU_FREQ_S3C
+	bool
+	help
+	  Internal configuration node for common cpufreq on Samsung SoC
+
+config CPU_FREQ_S3C24XX
+	bool "CPUfreq driver for Samsung S3C24XX series CPUs"
+	depends on ARCH_S3C2410 && CPU_FREQ && EXPERIMENTAL
+	select CPU_FREQ_S3C
+	help
+	  This enables the CPUfreq driver for the Samsung S3C24XX family
+	  of CPUs.
+
+	  For details, take a look at <file:Documentation/cpu-freq>.
+
+	  If in doubt, say N.
+
+config CPU_FREQ_S3C24XX_PLL
+	bool "Support CPUfreq changing of PLL frequency"
+	depends on CPU_FREQ_S3C24XX && EXPERIMENTAL
+	help
+	  Compile in support for changing the PLL frequency from the
+	  S3C24XX series CPUfreq driver. The PLL takes time to settle
+	  after a frequency change, so by default it is not enabled.
+
+	  This also means that the PLL tables for the selected CPU(s) will
+	  be built which may increase the size of the kernel image.
+
+config CPU_FREQ_S3C24XX_DEBUG
+	bool "Debug CPUfreq Samsung driver core"
+	depends on CPU_FREQ_S3C24XX
+	help
+	  Enable s3c_freq_dbg for the Samsung S3C CPUfreq core
+
+config CPU_FREQ_S3C24XX_IODEBUG
+	bool "Debug CPUfreq Samsung driver IO timing"
+	depends on CPU_FREQ_S3C24XX
+	help
+	  Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
+
 endif
 
 source "drivers/cpuidle/Kconfig"
-- 
cgit v1.2.3


From 831a6fcb9393960b35173fa2e0f835b710152fff Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:26 +0100
Subject: ARM: S3C2410: CPUFREQ: Add io-timing support.

Add io-timing support for frequency scaling on the S3C2410 SoC.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/Kconfig            |   9 +
 arch/arm/plat-s3c24xx/Makefile           |   1 +
 arch/arm/plat-s3c24xx/s3c2410-iotiming.c | 432 +++++++++++++++++++++++++++++++
 3 files changed, 442 insertions(+)
 create mode 100644 arch/arm/plat-s3c24xx/s3c2410-iotiming.c

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 5b0bc914f58..d82d30c2f05 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -107,6 +107,15 @@ config S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7
 
 # common code for s3c24xx based machines, such as the SMDKs.
 
+# cpu frequency items common between s3c2410 and s3c2440/s3c2442
+
+config S3C2410_IOTIMING
+	bool
+	depends on CPU_FREQ_S3C24XX
+	help
+	  Internal node to select io timing code that is common to the s3c2410
+	  and s3c2440/s3c2442 cpu frequency support.
+
 config MACH_SMDK
 	bool
 	help
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 1f6add552bd..6f9afd13ab4 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_S3C24XX_PWM)	+= pwm.o
 obj-$(CONFIG_S3C2410_CLOCK)	+= s3c2410-clock.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C24XX_ADC)	+= adc.o
+obj-$(CONFIG_S3C2410_IOTIMING)	+= s3c2410-iotiming.o
 
 # device specific setup and/or initialisation
 obj-$(CONFIG_ARCH_S3C2410)	+= setup-i2c.o
diff --git a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
new file mode 100644
index 00000000000..26fe2129cf2
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
@@ -0,0 +1,432 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
+ *
+ * Copyright (c) 2006,2008,2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling - IO timing for S3C2410/S3C2440/S3C2442
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/cpufreq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu-freq-core.h>
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+/**
+ * s3c2410_print_timing - print bank timing data for debug purposes
+ * @pfx: The prefix to put on the output
+ * @timings: The timing inforamtion to print.
+*/
+static void s3c2410_print_timing(const char *pfx,
+				 struct s3c_iotimings *timings)
+{
+	struct s3c2410_iobank_timing *bt;
+	int bank;
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bt = timings->bank[bank].io_2410;
+		if (!bt)
+			continue;
+
+		printk(KERN_DEBUG "%s %d: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, "
+		       "Tcoh=%d.%d, Tcah=%d.%d\n", pfx, bank,
+		       print_ns(bt->tacs),
+		       print_ns(bt->tcos),
+		       print_ns(bt->tacc),
+		       print_ns(bt->tcoh),
+		       print_ns(bt->tcah));
+	}
+}
+
+/**
+ * bank_reg - convert bank number to pointer to the control register.
+ * @bank: The IO bank number.
+ */
+static inline void __iomem *bank_reg(unsigned int bank)
+{
+	return S3C2410_BANKCON0 + (bank << 2);
+}
+
+/**
+ * bank_is_io - test whether bank is used for IO
+ * @bankcon: The bank control register.
+ *
+ * This is a simplistic test to see if any BANKCON[x] is not an IO
+ * bank. It currently does not take into account whether BWSCON has
+ * an illegal width-setting in it, or if the pin connected to nCS[x]
+ * is actually being handled as a chip-select.
+ */
+static inline int bank_is_io(unsigned long bankcon)
+{
+	return !(bankcon & S3C2410_BANKCON_SDRAM);
+}
+
+/**
+ * to_div - convert cycle time to divisor
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ *
+ * Convert the given cycle time into the divisor to use to obtain it from
+ * HCLK.
+*/
+static inline unsigned int to_div(unsigned int cyc, unsigned int hclk_tns)
+{
+	if (cyc == 0)
+		return 0;
+
+	return DIV_ROUND_UP(cyc, hclk_tns);
+}
+
+/**
+ * calc_0124 - calculate divisor control for divisors that do /0, /1. /2 and /4
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @v: Pointer to register to alter.
+ * @shift: The shift to get to the control bits.
+ *
+ * Calculate the divisor, and turn it into the correct control bits to
+ * set in the result, @v.
+ */
+static unsigned int calc_0124(unsigned int cyc, unsigned long hclk_tns,
+			      unsigned long *v, int shift)
+{
+	unsigned int div = to_div(cyc, hclk_tns);
+	unsigned long val;
+
+	s3c_freq_iodbg("%s: cyc=%d, hclk=%lu, shift=%d => div %d\n",
+		       __func__, cyc, hclk_tns, shift, div);
+
+	switch (div) {
+	case 0:
+		val = 0;
+		break;
+	case 1:
+		val = 1;
+		break;
+	case 2:
+		val = 2;
+		break;
+	case 3:
+	case 4:
+		val = 3;
+		break;
+	default:
+		return -1;
+	}
+
+	*v |= val << shift;
+	return 0;
+}
+
+int calc_tacp(unsigned int cyc, unsigned long hclk, unsigned long *v)
+{
+	/* Currently no support for Tacp calculations. */
+	return 0;
+}
+
+/**
+ * calc_tacc - calculate divisor control for tacc.
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @nwait_en: IS nWAIT enabled for this bank.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @v: Pointer to register to alter.
+ *
+ * Calculate the divisor control for tACC, taking into account whether
+ * the bank has nWAIT enabled. The result is used to modify the value
+ * pointed to by @v.
+*/
+static int calc_tacc(unsigned int cyc, int nwait_en,
+		     unsigned long hclk_tns, unsigned long *v)
+{
+	unsigned int div = to_div(cyc, hclk_tns);
+	unsigned long val;
+
+	s3c_freq_iodbg("%s: cyc=%u, nwait=%d, hclk=%lu => div=%u\n",
+		       __func__, cyc, nwait_en, hclk_tns, div);
+
+	/* if nWait enabled on an bank, Tacc must be at-least 4 cycles. */
+	if (nwait_en && div < 4)
+		div = 4;
+
+	switch (div) {
+	case 0:
+		val = 0;
+		break;
+
+	case 1:
+	case 2:
+	case 3:
+	case 4:
+		val = div - 1;
+		break;
+
+	case 5:
+	case 6:
+		val = 4;
+		break;
+
+	case 7:
+	case 8:
+		val = 5;
+		break;
+
+	case 9:
+	case 10:
+		val = 6;
+		break;
+
+	case 11:
+	case 12:
+	case 13:
+	case 14:
+		val = 7;
+		break;
+
+	default:
+		return -1;
+	}
+
+	*v |= val << 8;
+	return 0;
+}
+
+/**
+ * s3c2410_calc_bank - calculate bank timing infromation
+ * @cfg: The configuration we need to calculate for.
+ * @bt: The bank timing information.
+ *
+ * Given the cycle timine for a bank @bt, calculate the new BANKCON
+ * setting for the @cfg timing. This updates the timing information
+ * ready for the cpu frequency change.
+ */
+static int s3c2410_calc_bank(struct s3c_cpufreq_config *cfg,
+			     struct s3c2410_iobank_timing *bt)
+{
+	unsigned long hclk = cfg->freq.hclk_tns;
+	unsigned long res;
+	int ret;
+
+	res  = bt->bankcon;
+	res &= (S3C2410_BANKCON_SDRAM | S3C2410_BANKCON_PMC16);
+
+	/* tacp: 2,3,4,5 */
+	/* tcah: 0,1,2,4 */
+	/* tcoh: 0,1,2,4 */
+	/* tacc: 1,2,3,4,6,7,10,14 (>4 for nwait) */
+	/* tcos: 0,1,2,4 */
+	/* tacs: 0,1,2,4 */
+
+	ret  = calc_0124(bt->tacs, hclk, &res, S3C2410_BANKCON_Tacs_SHIFT);
+	ret |= calc_0124(bt->tcos, hclk, &res, S3C2410_BANKCON_Tcos_SHIFT);
+	ret |= calc_0124(bt->tcah, hclk, &res, S3C2410_BANKCON_Tcah_SHIFT);
+	ret |= calc_0124(bt->tcoh, hclk, &res, S3C2410_BANKCON_Tcoh_SHIFT);
+
+	if (ret)
+		return -EINVAL;
+
+	ret |= calc_tacp(bt->tacp, hclk, &res);
+	ret |= calc_tacc(bt->tacc, bt->nwait_en, hclk, &res);
+
+	if (ret)
+		return -EINVAL;
+
+	bt->bankcon = res;
+	return 0;
+}
+
+static unsigned int tacc_tab[] = {
+	[0]	= 1,
+	[1]	= 2,
+	[2]	= 3,
+	[3]	= 4,
+	[4]	= 6,
+	[5]	= 9,
+	[6]	= 10,
+	[7]	= 14,
+};
+
+/**
+ * get_tacc - turn tACC value into cycle time
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @val: The bank timing register value, shifed down.
+ */
+static unsigned int get_tacc(unsigned long hclk_tns,
+			     unsigned long val)
+{
+	val &= 7;
+	return hclk_tns * tacc_tab[val];
+}
+
+/**
+ * get_0124 - turn 0/1/2/4 divider into cycle time
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @val: The bank timing register value, shifed down.
+ */
+static unsigned int get_0124(unsigned long hclk_tns,
+			     unsigned long val)
+{
+	val &= 3;
+	return hclk_tns * ((val == 3) ? 4 : val);
+}
+
+/**
+ * s3c2410_iotiming_getbank - turn BANKCON into cycle time information
+ * @cfg: The frequency configuration
+ * @bt: The bank timing to fill in (uses cached BANKCON)
+ *
+ * Given the BANKCON setting in @bt and the current frequency settings
+ * in @cfg, update the cycle timing information.
+ */
+void s3c2410_iotiming_getbank(struct s3c_cpufreq_config *cfg,
+			      struct s3c2410_iobank_timing *bt)
+{
+	unsigned long bankcon = bt->bankcon;
+	unsigned long hclk = cfg->freq.hclk_tns;
+
+	bt->tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT);
+	bt->tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT);
+	bt->tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT);
+	bt->tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT);
+	bt->tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
+}
+
+/**
+ * s3c2410_iotiming_calc - Calculate bank timing for frequency change.
+ * @cfg: The frequency configuration
+ * @iot: The IO timing information to fill out.
+ *
+ * Calculate the new values for the banks in @iot based on the new
+ * frequency information in @cfg. This is then used by s3c2410_iotiming_set()
+ * to update the timing when necessary.
+ */
+int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
+			  struct s3c_iotimings *iot)
+{
+	struct s3c2410_iobank_timing *bt;
+	unsigned long bankcon;
+	int bank;
+	int ret;
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bankcon = __raw_readl(bank_reg(bank));
+		bt = iot->bank[bank].io_2410;
+
+		if (!bt)
+			continue;
+
+		bt->bankcon = bankcon;
+
+		ret = s3c2410_calc_bank(cfg, bt);
+		if (ret) {
+			printk(KERN_ERR "%s: cannot calculate bank %d io\n",
+			       __func__, bank);
+			goto err;
+		}
+
+		s3c_freq_iodbg("%s: bank %d: con=%08lx\n",
+			       __func__, bank, bt->bankcon);
+	}
+
+	return 0;
+ err:
+	return ret;
+}
+
+/**
+ * s3c2410_iotiming_set - set the IO timings from the given setup.
+ * @cfg: The frequency configuration
+ * @iot: The IO timing information to use.
+ *
+ * Set all the currently used IO bank timing information generated
+ * by s3c2410_iotiming_calc() once the core has validated that all
+ * the new values are within permitted bounds.
+ */
+void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
+			  struct s3c_iotimings *iot)
+{
+	struct s3c2410_iobank_timing *bt;
+	int bank;
+
+	/* set the io timings from the specifier */
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bt = iot->bank[bank].io_2410;
+		if (!bt)
+			continue;
+
+		__raw_writel(bt->bankcon, bank_reg(bank));
+	}
+}
+
+/**
+ * s3c2410_iotiming_get - Get the timing information from current registers.
+ * @cfg: The frequency configuration
+ * @timings: The IO timing information to fill out.
+ *
+ * Calculate the @timings timing information from the current frequency
+ * information in @cfg, and the new frequency configur
+ * through all the IO banks, reading the state and then updating @iot
+ * as necessary.
+ *
+ * This is used at the moment on initialisation to get the current
+ * configuration so that boards do not have to carry their own setup
+ * if the timings are correct on initialisation.
+ */
+
+int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
+			 struct s3c_iotimings *timings)
+{
+	struct s3c2410_iobank_timing *bt;
+	unsigned long bankcon;
+	unsigned long bwscon;
+	int bank;
+
+	bwscon = __raw_readl(S3C2410_BWSCON);
+
+	/* look through all banks to see what is currently set. */
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bankcon = __raw_readl(bank_reg(bank));
+
+		if (!bank_is_io(bankcon))
+			continue;
+
+		s3c_freq_iodbg("%s: bank %d: con %08lx\n",
+			       __func__, bank, bankcon);
+
+		bt = kzalloc(sizeof(struct s3c2410_iobank_timing), GFP_KERNEL);
+		if (!bt) {
+			printk(KERN_ERR "%s: no memory for bank\n", __func__);
+			return -ENOMEM;
+		}
+
+		/* find out in nWait is enabled for bank. */
+
+		if (bank != 0) {
+			unsigned long tmp  = S3C2410_BWSCON_GET(bwscon, bank);
+			if (tmp & S3C2410_BWSCON_WS)
+				bt->nwait_en = 1;
+		}
+
+		timings->bank[bank].io_2410 = bt;
+		bt->bankcon = bankcon;
+
+		s3c2410_iotiming_getbank(cfg, bt);
+	}
+
+	s3c2410_print_timing("get", timings);
+	return 0;
+}
-- 
cgit v1.2.3


From a24c091db988551e2c350cfde9eb80ab6e791ffb Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:27 +0100
Subject: ARM: S3C2410: CPUFREQ: Add core support.

Add core support for frequency scaling on the S3C2410 SoC.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/Kconfig                 |  11 ++
 arch/arm/mach-s3c2410/Makefile                |   1 +
 arch/arm/mach-s3c2410/cpu-freq.c              | 157 ++++++++++++++++++++++++++
 arch/arm/plat-s3c24xx/Kconfig                 |   7 ++
 arch/arm/plat-s3c24xx/Makefile                |   1 +
 arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c |  64 +++++++++++
 6 files changed, 241 insertions(+)
 create mode 100644 arch/arm/mach-s3c2410/cpu-freq.c
 create mode 100644 arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 41bb65d5b91..a7f70e18ccb 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -12,6 +12,7 @@ config CPU_S3C2410
 	select S3C2410_GPIO
 	select CPU_LLSERIAL_S3C2410
 	select S3C2410_PM if PM
+	select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
 	help
 	  Support for S3C2410 and S3C2410A family from the S3C24XX line
 	  of Samsung Mobile CPUs.
@@ -45,6 +46,15 @@ config MACH_BAST_IDE
 	  Internal node for machines with an BAST style IDE
 	  interface
 
+# cpu frequency scaling support
+
+config S3C2410_CPUFREQ
+	bool
+	depends on CPU_FREQ_S3C24XX && CPU_S3C2410
+	select S3C2410_CPUFREQ_UTILS
+	help
+	  CPU Frequency scaling support for S3C2410
+
 menu "S3C2410 Machines"
 
 config ARCH_SMDK2410
@@ -79,6 +89,7 @@ config MACH_N30
 config ARCH_BAST
 	bool "Simtec Electronics BAST (EB2410ITX)"
 	select CPU_S3C2410
+	select S3C2410_IOTIMING if S3C2410_CPUFREQ
 	select PM_SIMTEC if PM
 	select SIMTEC_NOR
 	select MACH_BAST_IDE
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index fca02f82711..cc25eb0eb2c 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C2410_PM)	+= pm.o sleep.o
 obj-$(CONFIG_S3C2410_GPIO)	+= gpio.o
+obj-$(CONFIG_S3C2410_CPUFREQ)	+= cpu-freq.o
 
 # Machine support
 
diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c2410/cpu-freq.c
new file mode 100644
index 00000000000..f2cbdbab0df
--- /dev/null
+++ b/arch/arm/mach-s3c2410/cpu-freq.c
@@ -0,0 +1,157 @@
+/* linux/arch/arm/mach-s3c2410/cpu-freq.c
+ *
+ * Copyright (c) 2006,2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 CPU Frequency scaling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu-freq-core.h>
+
+/* Note, 2410A has an extra mode for 1:4:4 ratio, bit 2 of CLKDIV */
+
+static void s3c2410_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+	u32 clkdiv = 0;
+
+	if (cfg->divs.h_divisor == 2)
+		clkdiv |= S3C2410_CLKDIVN_HDIVN;
+
+	if (cfg->divs.p_divisor != cfg->divs.h_divisor)
+		clkdiv |= S3C2410_CLKDIVN_PDIVN;
+
+	__raw_writel(clkdiv, S3C2410_CLKDIVN);
+}
+
+static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+	unsigned long hclk, fclk, pclk;
+	unsigned int hdiv, pdiv;
+	unsigned long hclk_max;
+
+	fclk = cfg->freq.fclk;
+	hclk_max = cfg->max.hclk;
+
+	cfg->freq.armclk = fclk;
+
+	s3c_freq_dbg("%s: fclk is %lu, max hclk %lu\n",
+		      __func__, fclk, hclk_max);
+
+	hdiv = (fclk > cfg->max.hclk) ? 2 : 1;
+	hclk = fclk / hdiv;
+
+	if (hclk > cfg->max.hclk) {
+		s3c_freq_dbg("%s: hclk too big\n", __func__);
+		return -EINVAL;
+	}
+
+	pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
+	pclk = hclk / pdiv;
+
+	if (pclk > cfg->max.pclk) {
+		s3c_freq_dbg("%s: pclk too big\n", __func__);
+		return -EINVAL;
+	}
+
+	pdiv *= hdiv;
+
+	/* record the result */
+	cfg->divs.p_divisor = pdiv;
+	cfg->divs.h_divisor = hdiv;
+
+	return 0      ;
+}
+
+static struct s3c_cpufreq_info s3c2410_cpufreq_info = {
+	.max		= {
+		.fclk	= 200000000,
+		.hclk	= 100000000,
+		.pclk	=  50000000,
+	},
+
+	/* transition latency is about 5ms worst-case, so
+	 * set 10ms to be sure */
+	.latency	= 10000000,
+
+	.locktime_m	= 150,
+	.locktime_u	= 150,
+	.locktime_bits	= 12,
+
+	.need_pll	= 1,
+
+	.name		= "s3c2410",
+	.calc_iotiming	= s3c2410_iotiming_calc,
+	.set_iotiming	= s3c2410_iotiming_set,
+	.get_iotiming	= s3c2410_iotiming_get,
+	.resume_clocks	= s3c2410_setup_clocks,
+
+	.set_fvco	= s3c2410_set_fvco,
+	.set_refresh	= s3c2410_cpufreq_setrefresh,
+	.set_divs	= s3c2410_cpufreq_setdivs,
+	.calc_divs	= s3c2410_cpufreq_calcdivs,
+};
+
+static int s3c2410_cpufreq_add(struct sys_device *sysdev)
+{
+	return s3c_cpufreq_register(&s3c2410_cpufreq_info);
+}
+
+static struct sysdev_driver s3c2410_cpufreq_driver = {
+	.add		= s3c2410_cpufreq_add,
+};
+
+static int __init s3c2410_cpufreq_init(void)
+{
+	return sysdev_driver_register(&s3c2410_sysclass,
+				      &s3c2410_cpufreq_driver);
+}
+
+arch_initcall(s3c2410_cpufreq_init);
+
+static int s3c2410a_cpufreq_add(struct sys_device *sysdev)
+{
+	/* alter the maximum freq settings for S3C2410A. If a board knows
+	 * it only has a maximum of 200, then it should register its own
+	 * limits. */
+
+	s3c2410_cpufreq_info.max.fclk = 266000000;
+	s3c2410_cpufreq_info.max.hclk = 133000000;
+	s3c2410_cpufreq_info.max.pclk =  66500000;
+	s3c2410_cpufreq_info.name = "s3c2410a";
+
+	return s3c2410_cpufreq_add(sysdev);
+}
+
+static struct sysdev_driver s3c2410a_cpufreq_driver = {
+	.add		= s3c2410a_cpufreq_add,
+};
+
+static int __init s3c2410a_cpufreq_init(void)
+{
+	return sysdev_driver_register(&s3c2410a_sysclass,
+				      &s3c2410a_cpufreq_driver);
+}
+
+arch_initcall(s3c2410a_cpufreq_init);
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index d82d30c2f05..a547c79ed6c 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -116,6 +116,13 @@ config S3C2410_IOTIMING
 	  Internal node to select io timing code that is common to the s3c2410
 	  and s3c2440/s3c2442 cpu frequency support.
 
+config S3C2410_CPUFREQ_UTILS
+	bool
+	depends on CPU_FREQ_S3C24XX
+	help
+	  Internal node to select timing code that is common to the s3c2410
+	  and s3c2440/s3c244 cpu frequency support.
+
 config MACH_SMDK
 	bool
 	help
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 6f9afd13ab4..b28fe9cb0e5 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -36,6 +36,7 @@ obj-$(CONFIG_S3C2410_CLOCK)	+= s3c2410-clock.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C24XX_ADC)	+= adc.o
 obj-$(CONFIG_S3C2410_IOTIMING)	+= s3c2410-iotiming.o
+obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o
 
 # device specific setup and/or initialisation
 obj-$(CONFIG_ARCH_S3C2410)	+= setup-i2c.o
diff --git a/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c b/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
new file mode 100644
index 00000000000..43ea80190d8
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
@@ -0,0 +1,64 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling - utils for S3C2410/S3C2440/S3C2442
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/cpufreq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu-freq-core.h>
+
+/**
+ * s3c2410_cpufreq_setrefresh - set SDRAM refresh value
+ * @cfg: The frequency configuration
+ *
+ * Set the SDRAM refresh value appropriately for the configured
+ * frequency.
+ */
+void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+	struct s3c_cpufreq_board *board = cfg->board;
+	unsigned long refresh;
+	unsigned long refval;
+
+	/* Reduce both the refresh time (in ns) and the frequency (in MHz)
+	 * down to ensure that we do not overflow 32 bit numbers.
+	 *
+	 * This should work for HCLK up to 133MHz and refresh period up
+	 * to 30usec.
+	 */
+
+	refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
+	refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale  */
+	refresh = (1 << 11) + 1 - refresh;
+
+	s3c_freq_dbg("%s: refresh value %lu\n", __func__, refresh);
+
+	refval = __raw_readl(S3C2410_REFRESH);
+	refval &= ~((1 << 12) - 1);
+	refval |= refresh;
+	__raw_writel(refval, S3C2410_REFRESH);
+}
+
+/**
+ * s3c2410_set_fvco - set the PLL value
+ * @cfg: The frequency configuration
+ */
+void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg)
+{
+	__raw_writel(cfg->pll.index, S3C2410_MPLLCON);
+}
-- 
cgit v1.2.3


From 438a09e1eb01c3f0d4cddde97ed9caae652f910b Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:28 +0100
Subject: ARM: S3C2410: CPUFREQ: Add PLL table

Add PLL table for the S3C2410 SoC.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/Kconfig  |  7 ++++
 arch/arm/mach-s3c2410/Makefile |  1 +
 arch/arm/mach-s3c2410/pll.c    | 95 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 103 insertions(+)
 create mode 100644 arch/arm/mach-s3c2410/pll.c

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index a7f70e18ccb..d8c023d4df3 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -55,6 +55,13 @@ config S3C2410_CPUFREQ
 	help
 	  CPU Frequency scaling support for S3C2410
 
+config S3C2410_PLLTABLE
+	bool
+	depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL
+	default y
+	help
+	  Select the PLL table for the S3C2410
+
 menu "S3C2410 Machines"
 
 config ARCH_SMDK2410
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index cc25eb0eb2c..2ab5ba4b266 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C2410_PM)	+= pm.o sleep.o
 obj-$(CONFIG_S3C2410_GPIO)	+= gpio.o
 obj-$(CONFIG_S3C2410_CPUFREQ)	+= cpu-freq.o
+obj-$(CONFIG_S3C2410_PLLTABLE)	+= pll.o
 
 # Machine support
 
diff --git a/arch/arm/mach-s3c2410/pll.c b/arch/arm/mach-s3c2410/pll.c
new file mode 100644
index 00000000000..f178c2fd9d8
--- /dev/null
+++ b/arch/arm/mach-s3c2410/pll.c
@@ -0,0 +1,95 @@
+/* arch/arm/mach-s3c2410/pll.c
+ *
+ * Copyright (c) 2006,2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	Vincent Sanders <vince@arm.linux.org.uk>
+ *
+ * S3C2410 CPU PLL tables
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sysdev.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+static struct cpufreq_frequency_table pll_vals_12MHz[] = {
+    { .frequency = 34000000,  .index = PLLVAL(82, 2, 3),   },
+    { .frequency = 45000000,  .index = PLLVAL(82, 1, 3),   },
+    { .frequency = 51000000,  .index = PLLVAL(161, 3, 3),  },
+    { .frequency = 48000000,  .index = PLLVAL(120, 2, 3),  },
+    { .frequency = 56000000,  .index = PLLVAL(142, 2, 3),  },
+    { .frequency = 68000000,  .index = PLLVAL(82, 2, 2),   },
+    { .frequency = 79000000,  .index = PLLVAL(71, 1, 2),   },
+    { .frequency = 85000000,  .index = PLLVAL(105, 2, 2),  },
+    { .frequency = 90000000,  .index = PLLVAL(112, 2, 2),  },
+    { .frequency = 101000000, .index = PLLVAL(127, 2, 2),  },
+    { .frequency = 113000000, .index = PLLVAL(105, 1, 2),  },
+    { .frequency = 118000000, .index = PLLVAL(150, 2, 2),  },
+    { .frequency = 124000000, .index = PLLVAL(116, 1, 2),  },
+    { .frequency = 135000000, .index = PLLVAL(82, 2, 1),   },
+    { .frequency = 147000000, .index = PLLVAL(90, 2, 1),   },
+    { .frequency = 152000000, .index = PLLVAL(68, 1, 1),   },
+    { .frequency = 158000000, .index = PLLVAL(71, 1, 1),   },
+    { .frequency = 170000000, .index = PLLVAL(77, 1, 1),   },
+    { .frequency = 180000000, .index = PLLVAL(82, 1, 1),   },
+    { .frequency = 186000000, .index = PLLVAL(85, 1, 1),   },
+    { .frequency = 192000000, .index = PLLVAL(88, 1, 1),   },
+    { .frequency = 203000000, .index = PLLVAL(161, 3, 1),  },
+
+    /* 2410A extras */
+
+    { .frequency = 210000000, .index = PLLVAL(132, 2, 1),  },
+    { .frequency = 226000000, .index = PLLVAL(105, 1, 1),  },
+    { .frequency = 266000000, .index = PLLVAL(125, 1, 1),  },
+    { .frequency = 268000000, .index = PLLVAL(126, 1, 1),  },
+    { .frequency = 270000000, .index = PLLVAL(127, 1, 1),  },
+};
+
+static int s3c2410_plls_add(struct sys_device *dev)
+{
+	return s3c_plltab_register(pll_vals_12MHz, ARRAY_SIZE(pll_vals_12MHz));
+}
+
+static struct sysdev_driver s3c2410_plls_drv = {
+	.add	= s3c2410_plls_add,
+};
+
+static int __init s3c2410_pll_init(void)
+{
+	return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_plls_drv);
+
+}
+
+arch_initcall(s3c2410_pll_init);
+
+static struct sysdev_driver s3c2410a_plls_drv = {
+	.add	= s3c2410_plls_add,
+};
+
+static int __init s3c2410a_pll_init(void)
+{
+	return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_plls_drv);
+}
+
+arch_initcall(s3c2410a_pll_init);
-- 
cgit v1.2.3


From 342e20f10294aca4097ae2a056c72a202221a75f Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:29 +0100
Subject: ARM: S3C2440: CPUFREQ: Add core support.

Add core support for frequency scaling on the S3C2440 SoC.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/Kconfig           |   8 +
 arch/arm/plat-s3c24xx/Makefile          |   1 +
 arch/arm/plat-s3c24xx/s3c2440-cpufreq.c | 309 ++++++++++++++++++++++++++++++++
 3 files changed, 318 insertions(+)
 create mode 100644 arch/arm/plat-s3c24xx/s3c2440-cpufreq.c

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index a547c79ed6c..feb9db8886b 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -34,6 +34,14 @@ config CPU_S3C244X
 	help
 	  Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
 
+config S3C2440_CPUFREQ
+	bool "S3C2440/S3C2442 CPU Frequency scaling support"
+	depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
+	select S3C2410_CPUFREQ_UTILS
+	default y
+	help
+	  CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
+
 config S3C24XX_PWM
 	bool "PWM device support"
 	select HAVE_PWM
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index b28fe9cb0e5..b73f2e17b16 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_CPU_FREQ_S3C24XX)	+= cpu-freq.o
 obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o
 obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-irq.o
 obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-clock.o
+obj-$(CONFIG_S3C2440_CPUFREQ)	+= s3c2440-cpufreq.o
 obj-$(CONFIG_PM_SIMTEC)		+= pm-simtec.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM)		+= irq-pm.o
diff --git a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
new file mode 100644
index 00000000000..c177a20319e
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
@@ -0,0 +1,309 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
+ *
+ * Copyright (c) 2006,2008,2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	Vincent Sanders <vince@simtec.co.uk>
+ *
+ * S3C2440/S3C2442 CPU Frequency scaling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+#include <plat/clock.h>
+
+static struct clk *xtal;
+static struct clk *fclk;
+static struct clk *hclk;
+static struct clk *armclk;
+
+/* HDIV: 1, 2, 3, 4, 6, 8 */
+
+static inline int within_khz(unsigned long a, unsigned long b)
+{
+	long diff = a - b;
+
+	return (diff >= -1000 && diff <= 1000);
+}
+
+/**
+ * s3c2440_cpufreq_calcdivs - calculate divider settings
+ * @cfg: The cpu frequency settings.
+ *
+ * Calcualte the divider values for the given frequency settings
+ * specified in @cfg. The values are stored in @cfg for later use
+ * by the relevant set routine if the request settings can be reached.
+ */
+int s3c2440_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+	unsigned int hdiv, pdiv;
+	unsigned long hclk, fclk, armclk;
+	unsigned long hclk_max;
+
+	fclk = cfg->freq.fclk;
+	armclk = cfg->freq.armclk;
+	hclk_max = cfg->max.hclk;
+
+	s3c_freq_dbg("%s: fclk is %lu, armclk %lu, max hclk %lu\n",
+		     __func__, fclk, armclk, hclk_max);
+
+	if (armclk > fclk) {
+		printk(KERN_WARNING "%s: armclk > fclk\n", __func__);
+		armclk = fclk;
+	}
+
+	/* if we are in DVS, we need HCLK to be <= ARMCLK */
+	if (armclk < fclk && armclk < hclk_max)
+		hclk_max = armclk;
+
+	for (hdiv = 1; hdiv < 9; hdiv++) {
+		if (hdiv == 5 || hdiv == 7)
+			hdiv++;
+
+		hclk = (fclk / hdiv);
+		if (hclk <= hclk_max || within_khz(hclk, hclk_max))
+			break;
+	}
+
+	s3c_freq_dbg("%s: hclk %lu, div %d\n", __func__, hclk, hdiv);
+
+	if (hdiv > 8)
+		goto invalid;
+
+	pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
+
+	if ((hclk / pdiv) > cfg->max.pclk)
+		pdiv++;
+
+	s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
+
+	if (pdiv > 2)
+		goto invalid;
+
+	pdiv *= hdiv;
+
+	/* calculate a valid armclk */
+
+	if (armclk < hclk)
+		armclk = hclk;
+
+	/* if we're running armclk lower than fclk, this really means
+	 * that the system should go into dvs mode, which means that
+	 * armclk is connected to hclk. */
+	if (armclk < fclk) {
+		cfg->divs.dvs = 1;
+		armclk = hclk;
+	} else
+		cfg->divs.dvs = 0;
+
+	cfg->freq.armclk = armclk;
+
+	/* store the result, and then return */
+
+	cfg->divs.h_divisor = hdiv;
+	cfg->divs.p_divisor = pdiv;
+
+	return 0;
+
+ invalid:
+	return -EINVAL;
+}
+
+#define CAMDIVN_HCLK_HALF (S3C2440_CAMDIVN_HCLK3_HALF | \
+			   S3C2440_CAMDIVN_HCLK4_HALF)
+
+/**
+ * s3c2440_cpufreq_setdivs - set the cpu frequency divider settings
+ * @cfg: The cpu frequency settings.
+ *
+ * Set the divisors from the settings in @cfg, which where generated
+ * during the calculation phase by s3c2440_cpufreq_calcdivs().
+ */
+static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+	unsigned long clkdiv, camdiv;
+
+	s3c_freq_dbg("%s: divsiors: h=%d, p=%d\n", __func__,
+		     cfg->divs.h_divisor, cfg->divs.p_divisor);
+
+	clkdiv = __raw_readl(S3C2410_CLKDIVN);
+	camdiv = __raw_readl(S3C2440_CAMDIVN);
+
+	clkdiv &= ~(S3C2440_CLKDIVN_HDIVN_MASK | S3C2440_CLKDIVN_PDIVN);
+	camdiv &= ~CAMDIVN_HCLK_HALF;
+
+	switch (cfg->divs.h_divisor) {
+	case 1:
+		clkdiv |= S3C2440_CLKDIVN_HDIVN_1;
+		break;
+
+	case 2:
+		clkdiv |= S3C2440_CLKDIVN_HDIVN_2;
+		break;
+
+	case 6:
+		camdiv |= S3C2440_CAMDIVN_HCLK3_HALF;
+	case 3:
+		clkdiv |= S3C2440_CLKDIVN_HDIVN_3_6;
+		break;
+
+	case 8:
+		camdiv |= S3C2440_CAMDIVN_HCLK4_HALF;
+	case 4:
+		clkdiv |= S3C2440_CLKDIVN_HDIVN_4_8;
+		break;
+
+	default:
+		BUG();	/* we don't expect to get here. */
+	}
+
+	if (cfg->divs.p_divisor != cfg->divs.h_divisor)
+		clkdiv |= S3C2440_CLKDIVN_PDIVN;
+
+	/* todo - set pclk. */
+
+	/* Write the divisors first with hclk intentionally halved so that
+	 * when we write clkdiv we will under-frequency instead of over. We
+	 * then make a short delay and remove the hclk halving if necessary.
+	 */
+
+	__raw_writel(camdiv | CAMDIVN_HCLK_HALF, S3C2440_CAMDIVN);
+	__raw_writel(clkdiv, S3C2410_CLKDIVN);
+
+	ndelay(20);
+	__raw_writel(camdiv, S3C2440_CAMDIVN);
+
+	clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
+}
+
+static int run_freq_for(unsigned long max_hclk, unsigned long fclk,
+			int *divs,
+			struct cpufreq_frequency_table *table,
+			size_t table_size)
+{
+	unsigned long freq;
+	int index = 0;
+	int div;
+
+	for (div = *divs; div > 0; div = *divs++) {
+		freq = fclk / div;
+
+		if (freq > max_hclk && div != 1)
+			continue;
+
+		freq /= 1000; /* table is in kHz */
+		index = s3c_cpufreq_addfreq(table, index, table_size, freq);
+		if (index < 0)
+			break;
+	}
+
+	return index;
+}
+
+static int hclk_divs[] = { 1, 2, 3, 4, 6, 8, -1 };
+
+static int s3c2440_cpufreq_calctable(struct s3c_cpufreq_config *cfg,
+				     struct cpufreq_frequency_table *table,
+				     size_t table_size)
+{
+	int ret;
+
+	WARN_ON(cfg->info == NULL);
+	WARN_ON(cfg->board == NULL);
+
+	ret = run_freq_for(cfg->info->max.hclk,
+			   cfg->info->max.fclk,
+			   hclk_divs,
+			   table, table_size);
+
+	s3c_freq_dbg("%s: returning %d\n", __func__, ret);
+
+	return ret;
+}
+
+struct s3c_cpufreq_info s3c2440_cpufreq_info = {
+	.max		= {
+		.fclk	= 400000000,
+		.hclk	= 133333333,
+		.pclk	=  66666666,
+	},
+
+	.locktime_m	= 300,
+	.locktime_u	= 300,
+	.locktime_bits	= 16,
+
+	.name		= "s3c244x",
+	.calc_iotiming	= s3c2410_iotiming_calc,
+	.set_iotiming	= s3c2410_iotiming_set,
+	.get_iotiming	= s3c2410_iotiming_get,
+	.set_fvco	= s3c2410_set_fvco,
+
+	.set_refresh	= s3c2410_cpufreq_setrefresh,
+	.set_divs	= s3c2440_cpufreq_setdivs,
+	.calc_divs	= s3c2440_cpufreq_calcdivs,
+	.calc_freqtable	= s3c2440_cpufreq_calctable,
+
+	.resume_clocks	= s3c244x_setup_clocks,
+};
+
+static int s3c2440_cpufreq_add(struct sys_device *sysdev)
+{
+	xtal = s3c_cpufreq_clk_get(NULL, "xtal");
+	hclk = s3c_cpufreq_clk_get(NULL, "hclk");
+	fclk = s3c_cpufreq_clk_get(NULL, "fclk");
+	armclk = s3c_cpufreq_clk_get(NULL, "armclk");
+
+	if (IS_ERR(xtal) || IS_ERR(hclk) || IS_ERR(fclk) || IS_ERR(armclk)) {
+		printk(KERN_ERR "%s: failed to get clocks\n", __func__);
+		return -ENOENT;
+	}
+
+	return s3c_cpufreq_register(&s3c2440_cpufreq_info);
+}
+
+static struct sysdev_driver s3c2440_cpufreq_driver = {
+	.add		= s3c2440_cpufreq_add,
+};
+
+static int s3c2440_cpufreq_init(void)
+{
+	return sysdev_driver_register(&s3c2440_sysclass,
+				      &s3c2440_cpufreq_driver);
+}
+
+/* arch_initcall adds the clocks we need, so use subsys_initcall. */
+subsys_initcall(s3c2440_cpufreq_init);
+
+static struct sysdev_driver s3c2442_cpufreq_driver = {
+	.add		= s3c2440_cpufreq_add,
+};
+
+static int s3c2442_cpufreq_init(void)
+{
+	return sysdev_driver_register(&s3c2442_sysclass,
+				      &s3c2442_cpufreq_driver);
+}
+
+subsys_initcall(s3c2442_cpufreq_init);
-- 
cgit v1.2.3


From 78278d6a9673b487d8229dd430cacdf9964c0d3f Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:30 +0100
Subject: ARM: S3C2440: CPUFREQ: Add PLL tables

Add PLL tables for the S3C2440.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/Kconfig                |  14 +++
 arch/arm/plat-s3c24xx/Makefile               |   3 +
 arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c |  97 ++++++++++++++++++++
 arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c | 127 +++++++++++++++++++++++++++
 4 files changed, 241 insertions(+)
 create mode 100644 arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
 create mode 100644 arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index feb9db8886b..9c449c048c7 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -42,6 +42,20 @@ config S3C2440_CPUFREQ
 	help
 	  CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
 
+config S3C2440_PLL_12000000
+	bool
+	depends on S3C2440_CPUFREQ
+	default y if CPU_FREQ_S3C24XX_PLL
+	help
+	  PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
+
+config S3C2440_PLL_16934400
+	bool
+	depends on S3C2440_CPUFREQ
+	default y if CPU_FREQ_S3C24XX_PLL
+	help
+	  PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
+
 config S3C24XX_PWM
 	bool "PWM device support"
 	select HAVE_PWM
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index b73f2e17b16..c60317b3491 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -28,6 +28,9 @@ obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o
 obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-irq.o
 obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-clock.o
 obj-$(CONFIG_S3C2440_CPUFREQ)	+= s3c2440-cpufreq.o
+obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
+obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
+
 obj-$(CONFIG_PM_SIMTEC)		+= pm-simtec.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM)		+= irq-pm.o
diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c b/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
new file mode 100644
index 00000000000..ff9443b233a
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
@@ -0,0 +1,97 @@
+/* arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
+ *
+ * Copyright (c) 2006,2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	Vincent Sanders <vince@arm.linux.org.uk>
+ *
+ * S3C2440/S3C2442 CPU PLL tables (12MHz Crystal)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+static struct cpufreq_frequency_table s3c2440_plls_12[] __initdata = {
+	{ .frequency = 75000000,	.index = PLLVAL(0x75, 3, 3),  }, 	/* FVco 600.000000 */
+	{ .frequency = 80000000,	.index = PLLVAL(0x98, 4, 3),  }, 	/* FVco 640.000000 */
+	{ .frequency = 90000000,	.index = PLLVAL(0x70, 2, 3),  }, 	/* FVco 720.000000 */
+	{ .frequency = 100000000,	.index = PLLVAL(0x5c, 1, 3),  }, 	/* FVco 800.000000 */
+	{ .frequency = 110000000,	.index = PLLVAL(0x66, 1, 3),  }, 	/* FVco 880.000000 */
+	{ .frequency = 120000000,	.index = PLLVAL(0x70, 1, 3),  }, 	/* FVco 960.000000 */
+	{ .frequency = 150000000,	.index = PLLVAL(0x75, 3, 2),  }, 	/* FVco 600.000000 */
+	{ .frequency = 160000000,	.index = PLLVAL(0x98, 4, 2),  }, 	/* FVco 640.000000 */
+	{ .frequency = 170000000,	.index = PLLVAL(0x4d, 1, 2),  }, 	/* FVco 680.000000 */
+	{ .frequency = 180000000,	.index = PLLVAL(0x70, 2, 2),  }, 	/* FVco 720.000000 */
+	{ .frequency = 190000000,	.index = PLLVAL(0x57, 1, 2),  }, 	/* FVco 760.000000 */
+	{ .frequency = 200000000,	.index = PLLVAL(0x5c, 1, 2),  }, 	/* FVco 800.000000 */
+	{ .frequency = 210000000,	.index = PLLVAL(0x84, 2, 2),  }, 	/* FVco 840.000000 */
+	{ .frequency = 220000000,	.index = PLLVAL(0x66, 1, 2),  }, 	/* FVco 880.000000 */
+	{ .frequency = 230000000,	.index = PLLVAL(0x6b, 1, 2),  }, 	/* FVco 920.000000 */
+	{ .frequency = 240000000,	.index = PLLVAL(0x70, 1, 2),  }, 	/* FVco 960.000000 */
+	{ .frequency = 300000000,	.index = PLLVAL(0x75, 3, 1),  }, 	/* FVco 600.000000 */
+	{ .frequency = 310000000,	.index = PLLVAL(0x93, 4, 1),  }, 	/* FVco 620.000000 */
+	{ .frequency = 320000000,	.index = PLLVAL(0x98, 4, 1),  }, 	/* FVco 640.000000 */
+	{ .frequency = 330000000,	.index = PLLVAL(0x66, 2, 1),  }, 	/* FVco 660.000000 */
+	{ .frequency = 340000000,	.index = PLLVAL(0x4d, 1, 1),  }, 	/* FVco 680.000000 */
+	{ .frequency = 350000000,	.index = PLLVAL(0xa7, 4, 1),  }, 	/* FVco 700.000000 */
+	{ .frequency = 360000000,	.index = PLLVAL(0x70, 2, 1),  }, 	/* FVco 720.000000 */
+	{ .frequency = 370000000,	.index = PLLVAL(0xb1, 4, 1),  }, 	/* FVco 740.000000 */
+	{ .frequency = 380000000,	.index = PLLVAL(0x57, 1, 1),  }, 	/* FVco 760.000000 */
+	{ .frequency = 390000000,	.index = PLLVAL(0x7a, 2, 1),  }, 	/* FVco 780.000000 */
+	{ .frequency = 400000000,	.index = PLLVAL(0x5c, 1, 1),  }, 	/* FVco 800.000000 */
+};
+
+static int s3c2440_plls12_add(struct sys_device *dev)
+{
+	struct clk *xtal_clk;
+	unsigned long xtal;
+
+	xtal_clk = clk_get(NULL, "xtal");
+	if (IS_ERR(xtal_clk))
+		return PTR_ERR(xtal_clk);
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	if (xtal == 12000000) {
+		printk(KERN_INFO "Using PLL table for 12MHz crystal\n");
+		return s3c_plltab_register(s3c2440_plls_12,
+					   ARRAY_SIZE(s3c2440_plls_12));
+	}
+
+	return 0;
+}
+
+static struct sysdev_driver s3c2440_plls12_drv = {
+	.add	= s3c2440_plls12_add,
+};
+
+static int __init s3c2440_pll_12mhz(void)
+{
+	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_plls12_drv);
+
+}
+
+arch_initcall(s3c2440_pll_12mhz);
+
+static struct sysdev_driver s3c2442_plls12_drv = {
+	.add	= s3c2440_plls12_add,
+};
+
+static int __init s3c2442_pll_12mhz(void)
+{
+	return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_plls12_drv);
+
+}
+
+arch_initcall(s3c2442_pll_12mhz);
diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c b/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
new file mode 100644
index 00000000000..7679af13a94
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
@@ -0,0 +1,127 @@
+/* arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
+ *
+ * Copyright (c) 2006-2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	Vincent Sanders <vince@arm.linux.org.uk>
+ *
+ * S3C2440/S3C2442 CPU PLL tables (16.93444MHz Crystal)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+static struct cpufreq_frequency_table s3c2440_plls_169344[] __initdata = {
+	{ .frequency = 78019200,	.index = PLLVAL(121, 5, 3), 	}, 	/* FVco 624.153600 */
+	{ .frequency = 84067200,	.index = PLLVAL(131, 5, 3), 	}, 	/* FVco 672.537600 */
+	{ .frequency = 90115200,	.index = PLLVAL(141, 5, 3), 	}, 	/* FVco 720.921600 */
+	{ .frequency = 96163200,	.index = PLLVAL(151, 5, 3), 	}, 	/* FVco 769.305600 */
+	{ .frequency = 102135600,	.index = PLLVAL(185, 6, 3), 	}, 	/* FVco 817.084800 */
+	{ .frequency = 108259200,	.index = PLLVAL(171, 5, 3), 	}, 	/* FVco 866.073600 */
+	{ .frequency = 114307200,	.index = PLLVAL(127, 3, 3), 	}, 	/* FVco 914.457600 */
+	{ .frequency = 120234240,	.index = PLLVAL(134, 3, 3), 	}, 	/* FVco 961.873920 */
+	{ .frequency = 126161280,	.index = PLLVAL(141, 3, 3), 	}, 	/* FVco 1009.290240 */
+	{ .frequency = 132088320,	.index = PLLVAL(148, 3, 3), 	}, 	/* FVco 1056.706560 */
+	{ .frequency = 138015360,	.index = PLLVAL(155, 3, 3), 	}, 	/* FVco 1104.122880 */
+	{ .frequency = 144789120,	.index = PLLVAL(163, 3, 3), 	}, 	/* FVco 1158.312960 */
+	{ .frequency = 150100363,	.index = PLLVAL(187, 9, 2), 	}, 	/* FVco 600.401454 */
+	{ .frequency = 156038400,	.index = PLLVAL(121, 5, 2), 	}, 	/* FVco 624.153600 */
+	{ .frequency = 162086400,	.index = PLLVAL(126, 5, 2), 	}, 	/* FVco 648.345600 */
+	{ .frequency = 168134400,	.index = PLLVAL(131, 5, 2), 	}, 	/* FVco 672.537600 */
+	{ .frequency = 174048000,	.index = PLLVAL(177, 7, 2), 	}, 	/* FVco 696.192000 */
+	{ .frequency = 180230400,	.index = PLLVAL(141, 5, 2), 	}, 	/* FVco 720.921600 */
+	{ .frequency = 186278400,	.index = PLLVAL(124, 4, 2), 	}, 	/* FVco 745.113600 */
+	{ .frequency = 192326400,	.index = PLLVAL(151, 5, 2), 	}, 	/* FVco 769.305600 */
+	{ .frequency = 198132480,	.index = PLLVAL(109, 3, 2), 	}, 	/* FVco 792.529920 */
+	{ .frequency = 204271200,	.index = PLLVAL(185, 6, 2), 	}, 	/* FVco 817.084800 */
+	{ .frequency = 210268800,	.index = PLLVAL(141, 4, 2), 	}, 	/* FVco 841.075200 */
+	{ .frequency = 216518400,	.index = PLLVAL(171, 5, 2), 	}, 	/* FVco 866.073600 */
+	{ .frequency = 222264000,	.index = PLLVAL(97, 2, 2), 	}, 	/* FVco 889.056000 */
+	{ .frequency = 228614400,	.index = PLLVAL(127, 3, 2), 	}, 	/* FVco 914.457600 */
+	{ .frequency = 234259200,	.index = PLLVAL(158, 4, 2), 	}, 	/* FVco 937.036800 */
+	{ .frequency = 240468480,	.index = PLLVAL(134, 3, 2), 	}, 	/* FVco 961.873920 */
+	{ .frequency = 246960000,	.index = PLLVAL(167, 4, 2), 	}, 	/* FVco 987.840000 */
+	{ .frequency = 252322560,	.index = PLLVAL(141, 3, 2), 	}, 	/* FVco 1009.290240 */
+	{ .frequency = 258249600,	.index = PLLVAL(114, 2, 2), 	}, 	/* FVco 1032.998400 */
+	{ .frequency = 264176640,	.index = PLLVAL(148, 3, 2), 	}, 	/* FVco 1056.706560 */
+	{ .frequency = 270950400,	.index = PLLVAL(120, 2, 2), 	}, 	/* FVco 1083.801600 */
+	{ .frequency = 276030720,	.index = PLLVAL(155, 3, 2), 	}, 	/* FVco 1104.122880 */
+	{ .frequency = 282240000,	.index = PLLVAL(92, 1, 2), 	}, 	/* FVco 1128.960000 */
+	{ .frequency = 289578240,	.index = PLLVAL(163, 3, 2), 	}, 	/* FVco 1158.312960 */
+	{ .frequency = 294235200,	.index = PLLVAL(131, 2, 2), 	}, 	/* FVco 1176.940800 */
+	{ .frequency = 300200727,	.index = PLLVAL(187, 9, 1), 	}, 	/* FVco 600.401454 */
+	{ .frequency = 306358690,	.index = PLLVAL(191, 9, 1), 	}, 	/* FVco 612.717380 */
+	{ .frequency = 312076800,	.index = PLLVAL(121, 5, 1), 	}, 	/* FVco 624.153600 */
+	{ .frequency = 318366720,	.index = PLLVAL(86, 3, 1), 	}, 	/* FVco 636.733440 */
+	{ .frequency = 324172800,	.index = PLLVAL(126, 5, 1), 	}, 	/* FVco 648.345600 */
+	{ .frequency = 330220800,	.index = PLLVAL(109, 4, 1), 	}, 	/* FVco 660.441600 */
+	{ .frequency = 336268800,	.index = PLLVAL(131, 5, 1), 	}, 	/* FVco 672.537600 */
+	{ .frequency = 342074880,	.index = PLLVAL(93, 3, 1), 	}, 	/* FVco 684.149760 */
+	{ .frequency = 348096000,	.index = PLLVAL(177, 7, 1), 	}, 	/* FVco 696.192000 */
+	{ .frequency = 355622400,	.index = PLLVAL(118, 4, 1), 	}, 	/* FVco 711.244800 */
+	{ .frequency = 360460800,	.index = PLLVAL(141, 5, 1), 	}, 	/* FVco 720.921600 */
+	{ .frequency = 366206400,	.index = PLLVAL(165, 6, 1), 	}, 	/* FVco 732.412800 */
+	{ .frequency = 372556800,	.index = PLLVAL(124, 4, 1), 	}, 	/* FVco 745.113600 */
+	{ .frequency = 378201600,	.index = PLLVAL(126, 4, 1), 	}, 	/* FVco 756.403200 */
+	{ .frequency = 384652800,	.index = PLLVAL(151, 5, 1), 	}, 	/* FVco 769.305600 */
+	{ .frequency = 391608000,	.index = PLLVAL(177, 6, 1), 	}, 	/* FVco 783.216000 */
+	{ .frequency = 396264960,	.index = PLLVAL(109, 3, 1), 	}, 	/* FVco 792.529920 */
+	{ .frequency = 402192000,	.index = PLLVAL(87, 2, 1), 	}, 	/* FVco 804.384000 */
+};
+
+static int s3c2440_plls169344_add(struct sys_device *dev)
+{
+	struct clk *xtal_clk;
+	unsigned long xtal;
+
+	xtal_clk = clk_get(NULL, "xtal");
+	if (IS_ERR(xtal_clk))
+		return PTR_ERR(xtal_clk);
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	if (xtal == 169344000) {
+		printk(KERN_INFO "Using PLL table for 16.9344MHz crystal\n");
+		return s3c_plltab_register(s3c2440_plls_169344,
+					   ARRAY_SIZE(s3c2440_plls_169344));
+	}
+
+	return 0;
+}
+
+static struct sysdev_driver s3c2440_plls169344_drv = {
+	.add	= s3c2440_plls169344_add,
+};
+
+static int __init s3c2440_pll_16934400(void)
+{
+	return sysdev_driver_register(&s3c2440_sysclass,
+				      &s3c2440_plls169344_drv);
+
+}
+
+arch_initcall(s3c2440_pll_16934400);
+
+static struct sysdev_driver s3c2442_plls169344_drv = {
+	.add	= s3c2440_plls169344_add,
+};
+
+static int __init s3c2442_pll_16934400(void)
+{
+	return sysdev_driver_register(&s3c2442_sysclass,
+				      &s3c2442_plls169344_drv);
+
+}
+
+arch_initcall(s3c2442_pll_16934400);
-- 
cgit v1.2.3


From 0345b51c6a4bfaf6c066b8055d02116432b6a0c9 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:31 +0100
Subject: ARM: S3C2440: CPUFREQ: Add crystal frequency Kconfig entries.

Add entries to select the crystal to select for each different
supported board. This information is then available for anything
else requiring this, such as the CPUFreq PLL tables.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2440/Kconfig |  6 ++++++
 arch/arm/plat-s3c24xx/Kconfig | 16 ++++++++++++++--
 2 files changed, 20 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 8cfeaec3730..3cb12e39e0a 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -33,6 +33,7 @@ config MACH_ANUBIS
 	select PM_SIMTEC if PM
 	select HAVE_PATA_PLATFORM
 	select S3C24XX_GPIO_EXTRA64
+	select S3C2440_XTAL_12000000
 	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Simtec Electronics ANUBIS
@@ -44,6 +45,7 @@ config MACH_OSIRIS
 	select S3C24XX_DCLK
 	select PM_SIMTEC if PM
 	select S3C24XX_GPIO_EXTRA128
+	select S3C2440_XTAL_12000000
 	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Simtec IM2440D20 module, also
@@ -52,6 +54,7 @@ config MACH_OSIRIS
 config MACH_RX3715
 	bool "HP iPAQ rx3715"
 	select CPU_S3C2440
+	select S3C2440_XTAL_16934400
 	select PM_H1940 if PM
 	help
 	  Say Y here if you are using the HP iPAQ rx3715.
@@ -59,6 +62,7 @@ config MACH_RX3715
 config ARCH_S3C2440
 	bool "SMDK2440"
 	select CPU_S3C2440
+	select S3C2440_XTAL_16934400
 	select MACH_SMDK
 	select S3C_DEV_USB_HOST
 	help
@@ -67,6 +71,7 @@ config ARCH_S3C2440
 config MACH_NEXCODER_2440
  	bool "NexVision NEXCODER 2440 Light Board"
  	select CPU_S3C2440
+	select S3C2440_XTAL_12000000
 	select S3C_DEV_USB_HOST
 	help
  	  Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
@@ -75,6 +80,7 @@ config SMDK2440_CPU2440
 	bool "SMDK2440 with S3C2440 CPU module"
 	depends on ARCH_S3C2440
 	default y if ARCH_S3C2440
+	select S3C2440_XTAL_16934400
 	select CPU_S3C2440
 
 config MACH_AT2440EVB
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 9c449c048c7..ec9921b6848 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -42,16 +42,28 @@ config S3C2440_CPUFREQ
 	help
 	  CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
 
+config S3C2440_XTAL_12000000
+	bool
+	help
+	  Indicate that the build needs to support 12MHz system
+	  crystal.
+
+config S3C2440_XTAL_16934400
+	bool
+	help
+	  Indicate that the build needs to support 16.9344MHz system
+	  crystal.
+
 config S3C2440_PLL_12000000
 	bool
-	depends on S3C2440_CPUFREQ
+	depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
 	default y if CPU_FREQ_S3C24XX_PLL
 	help
 	  PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
 
 config S3C2440_PLL_16934400
 	bool
-	depends on S3C2440_CPUFREQ
+	depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
 	default y if CPU_FREQ_S3C24XX_PLL
 	help
 	  PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
-- 
cgit v1.2.3


From baf6b281cfa7259ab2d1148b879850f699520bc6 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:32 +0100
Subject: ARM: OSIRIS: CPUFREQ: Add CPU frequency scaling support

Add CPU frequency scalling support to the Simtec Osiris.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2440/Kconfig       | 1 +
 arch/arm/mach-s3c2440/mach-osiris.c | 9 +++++++++
 2 files changed, 10 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 3cb12e39e0a..8ae1b288f7f 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -46,6 +46,7 @@ config MACH_OSIRIS
 	select PM_SIMTEC if PM
 	select S3C24XX_GPIO_EXTRA128
 	select S3C2440_XTAL_12000000
+	select S3C2410_IOTIMING if S3C2440_CPUFREQ
 	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Simtec IM2440D20 module, also
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index cba064b49a6..2105a41281a 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -34,6 +34,7 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
+#include <plat/cpu-freq.h>
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-mem.h>
@@ -351,6 +352,12 @@ static struct clk *osiris_clocks[] __initdata = {
 	&s3c24xx_uclk,
 };
 
+static struct s3c_cpufreq_board __initdata osiris_cpufreq = {
+	.refresh	= 7800, /* refresh period is 7.8usec */
+	.auto_io	= 1,
+	.need_io	= 1,
+};
+
 static void __init osiris_map_io(void)
 {
 	unsigned long flags;
@@ -402,6 +409,8 @@ static void __init osiris_init(void)
 
 	s3c_i2c0_set_platdata(NULL);
 
+	s3c_cpufreq_setboard(&osiris_cpufreq);
+
 	i2c_register_board_info(0, osiris_i2c_devs,
 				ARRAY_SIZE(osiris_i2c_devs));
 
-- 
cgit v1.2.3


From 22d4239973bbd3738b3cfe6048c55f885f3f6256 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:33 +0100
Subject: ARM: S3C2412: CPUFREQ: Add core support.

Add core support for frequency scaling on the S3C2412 SoC.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2412/Kconfig    |   6 +
 arch/arm/mach-s3c2412/Makefile   |   1 +
 arch/arm/mach-s3c2412/cpu-freq.c | 251 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 258 insertions(+)
 create mode 100644 arch/arm/mach-s3c2412/cpu-freq.c

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index 63586ffd0ae..79e18340e07 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -32,6 +32,12 @@ config S3C2412_PM
 	help
 	  Internal config node to apply S3C2412 power management
 
+config S3C2412_CPUFREQ
+	bool
+	depends on CPU_FREQ_S3C24XX && CPU_S3C2412
+	default y
+	help
+	  CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
 
 menu "S3C2412 Machines"
 
diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile
index 20918d5dc6a..530ec46cbae 100644
--- a/arch/arm/mach-s3c2412/Makefile
+++ b/arch/arm/mach-s3c2412/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_CPU_S3C2412)	+= clock.o
 obj-$(CONFIG_CPU_S3C2412)	+= gpio.o
 obj-$(CONFIG_S3C2412_DMA)	+= dma.o
 obj-$(CONFIG_S3C2412_PM)	+= pm.o sleep.o
+obj-$(CONFIG_S3C2412_CPUFREQ)	+= cpu-freq.o
 
 # Machine support
 
diff --git a/arch/arm/mach-s3c2412/cpu-freq.c b/arch/arm/mach-s3c2412/cpu-freq.c
new file mode 100644
index 00000000000..80b20c33447
--- /dev/null
+++ b/arch/arm/mach-s3c2412/cpu-freq.c
@@ -0,0 +1,251 @@
+/* linux/arch/arm/mach-s3c2412/cpu-freq.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412 CPU Frequency scalling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+#include <mach/regs-s3c2412-mem.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu-freq-core.h>
+
+/* our clock resources. */
+static struct clk *xtal;
+static struct clk *fclk;
+static struct clk *hclk;
+static struct clk *armclk;
+
+/* HDIV: 1, 2, 3, 4, 6, 8 */
+
+static int s3c2412_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+	unsigned int hdiv, pdiv, armdiv, dvs;
+	unsigned long hclk, fclk, armclk, armdiv_clk;
+	unsigned long hclk_max;
+
+	fclk = cfg->freq.fclk;
+	armclk = cfg->freq.armclk;
+	hclk_max = cfg->max.hclk;
+
+	/* We can't run hclk above armclk as at the best we have to
+	 * have armclk and hclk in dvs mode. */
+
+	if (hclk_max > armclk)
+		hclk_max = armclk;
+
+	s3c_freq_dbg("%s: fclk=%lu, armclk=%lu, hclk_max=%lu\n",
+		     __func__, fclk, armclk, hclk_max);
+	s3c_freq_dbg("%s: want f=%lu, arm=%lu, h=%lu, p=%lu\n",
+		     __func__, cfg->freq.fclk, cfg->freq.armclk,
+		     cfg->freq.hclk, cfg->freq.pclk);
+
+	armdiv = fclk / armclk;
+
+	if (armdiv < 1)
+		armdiv = 1;
+	if (armdiv > 2)
+		armdiv = 2;
+
+	cfg->divs.arm_divisor = armdiv;
+	armdiv_clk = fclk / armdiv;
+
+	hdiv = armdiv_clk / hclk_max;
+	if (hdiv < 1)
+		hdiv = 1;
+
+	cfg->freq.hclk = hclk = armdiv_clk / hdiv;
+
+	/* set dvs depending on whether we reached armclk or not. */
+	cfg->divs.dvs = dvs = armclk < armdiv_clk;
+
+	/* update the actual armclk we achieved. */
+	cfg->freq.armclk = dvs ? hclk : armdiv_clk;
+
+	s3c_freq_dbg("%s: armclk %lu, hclk %lu, armdiv %d, hdiv %d, dvs %d\n",
+		     __func__, armclk, hclk, armdiv, hdiv, cfg->divs.dvs);
+
+	if (hdiv > 4)
+		goto invalid;
+
+	pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
+
+	if ((hclk / pdiv) > cfg->max.pclk)
+		pdiv++;
+
+	cfg->freq.pclk = hclk / pdiv;
+
+	s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
+
+	if (pdiv > 2)
+		goto invalid;
+
+	pdiv *= hdiv;
+
+	/* store the result, and then return */
+
+	cfg->divs.h_divisor = hdiv * armdiv;
+	cfg->divs.p_divisor = pdiv * armdiv;
+
+	return 0;
+
+ invalid:
+	return -EINVAL;
+}
+
+static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+	unsigned long clkdiv;
+	unsigned long olddiv;
+
+	olddiv = clkdiv = __raw_readl(S3C2410_CLKDIVN);
+
+	/* clear off current clock info */
+
+	clkdiv &= ~S3C2412_CLKDIVN_ARMDIVN;
+	clkdiv &= ~S3C2412_CLKDIVN_HDIVN_MASK;
+	clkdiv &= ~S3C2412_CLKDIVN_PDIVN;
+
+	if (cfg->divs.arm_divisor == 2)
+		clkdiv |= S3C2412_CLKDIVN_ARMDIVN;
+
+	clkdiv |= ((cfg->divs.h_divisor / cfg->divs.arm_divisor) - 1);
+
+	if (cfg->divs.p_divisor != cfg->divs.h_divisor)
+		clkdiv |= S3C2412_CLKDIVN_PDIVN;
+
+	s3c_freq_dbg("%s: div %08lx => %08lx\n", __func__, olddiv, clkdiv);
+	__raw_writel(clkdiv, S3C2410_CLKDIVN);
+
+	clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
+}
+
+static void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+	struct s3c_cpufreq_board *board = cfg->board;
+	unsigned long refresh;
+
+	s3c_freq_dbg("%s: refresh %u ns, hclk %lu\n", __func__,
+		     board->refresh, cfg->freq.hclk);
+
+	/* Reduce both the refresh time (in ns) and the frequency (in MHz)
+	 * by 10 each to ensure that we do not overflow 32 bit numbers. This
+	 * should work for HCLK up to 133MHz and refresh period up to 30usec.
+	 */
+
+	refresh = (board->refresh / 10);
+	refresh *= (cfg->freq.hclk / 100);
+	refresh /= (1 * 1000 * 1000);	/* 10^6 */
+
+	s3c_freq_dbg("%s: setting refresh 0x%08lx\n", __func__, refresh);
+	__raw_writel(refresh, S3C2412_REFRESH);
+}
+
+/* set the default cpu frequency information, based on an 200MHz part
+ * as we have no other way of detecting the speed rating in software.
+ */
+
+static struct s3c_cpufreq_info s3c2412_cpufreq_info = {
+	.max		= {
+		.fclk	= 200000000,
+		.hclk	= 100000000,
+		.pclk	=  50000000,
+	},
+
+	.latency	= 5000000, /* 5ms */
+
+	.locktime_m	= 150,
+	.locktime_u	= 150,
+	.locktime_bits	= 16,
+
+	.name		= "s3c2412",
+	.set_refresh	= s3c2412_cpufreq_setrefresh,
+	.set_divs	= s3c2412_cpufreq_setdivs,
+	.calc_divs	= s3c2412_cpufreq_calcdivs,
+
+	.resume_clocks	= s3c2412_setup_clocks,
+};
+
+static int s3c2412_cpufreq_add(struct sys_device *sysdev)
+{
+	unsigned long fclk_rate;
+
+	hclk = clk_get(NULL, "hclk");
+	if (IS_ERR(hclk)) {
+		printk(KERN_ERR "%s: cannot find hclk clock\n", __func__);
+		return -ENOENT;
+	}
+
+	fclk = clk_get(NULL, "fclk");
+	if (IS_ERR(fclk)) {
+		printk(KERN_ERR "%s: cannot find fclk clock\n", __func__);
+		goto err_fclk;
+	}
+
+	fclk_rate = clk_get_rate(fclk);
+	if (fclk_rate > 200000000) {
+		printk(KERN_INFO
+		       "%s: fclk %ld MHz, assuming 266MHz capable part\n",
+		       __func__, fclk_rate / 1000000);
+		s3c2412_cpufreq_info.max.fclk = 266000000;
+		s3c2412_cpufreq_info.max.hclk = 133000000;
+		s3c2412_cpufreq_info.max.pclk =  66000000;
+	}
+
+	armclk = clk_get(NULL, "armclk");
+	if (IS_ERR(armclk)) {
+		printk(KERN_ERR "%s: cannot find arm clock\n", __func__);
+		goto err_armclk;
+	}
+
+	xtal = clk_get(NULL, "xtal");
+	if (IS_ERR(xtal)) {
+		printk(KERN_ERR "%s: cannot find xtal clock\n", __func__);
+		goto err_xtal;
+	}
+
+	return s3c_cpufreq_register(&s3c2412_cpufreq_info);
+
+err_xtal:
+	clk_put(armclk);
+err_armclk:
+	clk_put(fclk);
+err_fclk:
+	clk_put(hclk);
+
+	return -ENOENT;
+}
+
+static struct sysdev_driver s3c2412_cpufreq_driver = {
+	.add		= s3c2412_cpufreq_add,
+};
+
+static int s3c2412_cpufreq_init(void)
+{
+	return sysdev_driver_register(&s3c2412_sysclass,
+				      &s3c2412_cpufreq_driver);
+}
+
+arch_initcall(s3c2412_cpufreq_init);
-- 
cgit v1.2.3


From e13cf03eaae3792442c401860910d40f33c89a33 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:35 +0100
Subject: ARM: S3C: Update CPU register mapping practices.

Currently map-base.h defines the main virtual address mappings made
for all the support S3C SoC series, but does not then define any base
for per-cpu mappings to be made from.

Add S3C_ADDR_CPU() macro to define an virtual address as an offset
from the last of the core mappings.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6400/include/mach/map.h  | 4 ++--
 arch/arm/plat-s3c/include/plat/map-base.h | 8 +++++++-
 2 files changed, 9 insertions(+), 3 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index 5057d9948d3..e02e6c38a39 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -49,7 +49,7 @@
 #define S3C64XX_PA_IIC1		(0x7F00F000)
 
 #define S3C64XX_PA_GPIO		(0x7F008000)
-#define S3C64XX_VA_GPIO		S3C_ADDR(0x00500000)
+#define S3C64XX_VA_GPIO		S3C_ADDR_CPU(0x00000000)
 #define S3C64XX_SZ_GPIO		SZ_4K
 
 #define S3C64XX_PA_SDRAM	(0x50000000)
@@ -57,7 +57,7 @@
 #define S3C64XX_PA_VIC1		(0x71300000)
 
 #define S3C64XX_PA_MODEM	(0x74108000)
-#define S3C64XX_VA_MODEM	S3C_ADDR(0x00600000)
+#define S3C64XX_VA_MODEM	S3C_ADDR_CPU(0x00100000)
 
 #define S3C64XX_PA_USBHOST	(0x74300000)
 
diff --git a/arch/arm/plat-s3c/include/plat/map-base.h b/arch/arm/plat-s3c/include/plat/map-base.h
index b84289d32a5..250be311c85 100644
--- a/arch/arm/plat-s3c/include/plat/map-base.h
+++ b/arch/arm/plat-s3c/include/plat/map-base.h
@@ -32,9 +32,15 @@
 
 #define S3C_VA_IRQ	S3C_ADDR(0x00000000)	/* irq controller(s) */
 #define S3C_VA_SYS	S3C_ADDR(0x00100000)	/* system control */
-#define S3C_VA_MEM	S3C_ADDR(0x00200000)	/* system control */
+#define S3C_VA_MEM	S3C_ADDR(0x00200000)	/* memory control */
 #define S3C_VA_TIMER	S3C_ADDR(0x00300000)	/* timer block */
 #define S3C_VA_WATCHDOG	S3C_ADDR(0x00400000)	/* watchdog */
 #define S3C_VA_UART	S3C_ADDR(0x01000000)	/* UART */
 
+/* This is used for the CPU specific mappings that may be needed, so that
+ * they do not need to directly used S3C_ADDR() and thus make it easier to
+ * modify the space for mapping.
+ */
+#define S3C_ADDR_CPU(x)	S3C_ADDR(0x00500000 + (x))
+
 #endif /* __ASM_PLAT_MAP_H */
-- 
cgit v1.2.3


From 25400036867fa7a135fca17810555400d176acaa Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:36 +0100
Subject: ARM: S3C2412: Update memory register mapping and definitions

Update the mapping of the memory controler registers and
add the missing definitions of the register block for the
SSMC.

The register contents definitions can be found in the pl093
header.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/include/mach/map.h           |  7 +++++++
 .../mach-s3c2410/include/mach/regs-s3c2412-mem.h   | 23 ++++++++++++++++++++--
 arch/arm/mach-s3c2412/s3c2412.c                    | 12 +++++++++++
 3 files changed, 40 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
index e99b212cb1c..11cce097550 100644
--- a/arch/arm/mach-s3c2410/include/mach/map.h
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -67,6 +67,13 @@
 #define S3C2443_PA_HSMMC   (0x4A800000)
 #define S3C2443_SZ_HSMMC   (256)
 
+/* S3C2412 memory and IO controls */
+#define S3C2412_PA_SSMC	(0x4F000000)
+#define S3C2412_VA_SSMC	S3C_ADDR_CPU(0x00000000)
+
+#define S3C2412_PA_EBI	(0x48800000)
+#define S3C2412_VA_EBI	S3C_ADDR_CPU(0x00010000)
+
 /* physical addresses of all the chip-select areas */
 
 #define S3C2410_CS0 (0x00000000)
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
index a4bf2712317..fb635251509 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
@@ -14,9 +14,11 @@
 #ifndef __ASM_ARM_REGS_S3C2412_MEM
 #define __ASM_ARM_REGS_S3C2412_MEM
 
-#ifndef S3C2412_MEMREG
 #define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
-#endif
+#define S3C2412_EBIREG(x) (S3C2412_VA_EBI + (x))
+
+#define S3C2412_SSMCREG(x) (S3C2412_VA_SSMC + (x))
+#define S3C2412_SSMC(x, o) (S3C2412_SSMCREG((x * 0x20) + (o)))
 
 #define S3C2412_BANKCFG			S3C2412_MEMREG(0x00)
 #define S3C2412_BANKCON1		S3C2412_MEMREG(0x04)
@@ -26,4 +28,21 @@
 #define S3C2412_REFRESH			S3C2412_MEMREG(0x10)
 #define S3C2412_TIMEOUT			S3C2412_MEMREG(0x14)
 
+/* EBI control registers */
+
+#define S3C2412_EBI_PR			S3C2412_EBIREG(0x00)
+#define S3C2412_EBI_BANKCFG		S3C2412_EBIREG(0x04)
+
+/* SSMC control registers */
+
+#define S3C2412_SSMC_BANK(x)		S3C2412_SSMC(x, 0x00)
+#define S3C2412_SMIDCYR(x)		S3C2412_SSMC(x, 0x00)
+#define S3C2412_SMBWSTRD(x)		S3C2412_SSMC(x, 0x04)
+#define S3C2412_SMBWSTWRR(x)		S3C2412_SSMC(x, 0x08)
+#define S3C2412_SMBWSTOENR(x)		S3C2412_SSMC(x, 0x0C)
+#define S3C2412_SMBWSTWENR(x)		S3C2412_SSMC(x, 0x10)
+#define S3C2412_SMBCR(x)		S3C2412_SSMC(x, 0x14)
+#define S3C2412_SMBSR(x)		S3C2412_SSMC(x, 0x18)
+#define S3C2412_SMBWSTBRDR(x)		S3C2412_SSMC(x, 0x1C)
+
 #endif /*  __ASM_ARM_REGS_S3C2412_MEM */
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index 5b5aba69ec3..bef39f77729 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -69,6 +69,18 @@ static struct map_desc s3c2412_iodesc[] __initdata = {
 	IODESC_ENT(CLKPWR),
 	IODESC_ENT(TIMER),
 	IODESC_ENT(WATCHDOG),
+	{
+		.virtual = (unsigned long)S3C2412_VA_SSMC,
+		.pfn	 = __phys_to_pfn(S3C2412_PA_SSMC),
+		.length	 = SZ_1M,
+		.type	 = MT_DEVICE,
+	},
+	{
+		.virtual = (unsigned long)S3C2412_VA_EBI,
+		.pfn	 = __phys_to_pfn(S3C2412_PA_EBI),
+		.length	 = SZ_1M,
+		.type	 = MT_DEVICE,
+	},
 };
 
 /* uart registration process */
-- 
cgit v1.2.3


From 140780ab5a2bc04ccff77337c3a27f3b44182a91 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:37 +0100
Subject: ARM: S3C24XX: CPUFREQ: S3C2412/S3C2443 IO timing support

Add IO bank timing support for S3C2412/S3C2443.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2412/Kconfig                      |   3 +
 arch/arm/mach-s3c2412/cpu-freq.c                   |   4 +
 arch/arm/plat-s3c24xx/Kconfig                      |   9 +
 arch/arm/plat-s3c24xx/Makefile                     |   1 +
 arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h |  52 +++-
 arch/arm/plat-s3c24xx/s3c2412-iotiming.c           | 261 +++++++++++++++++++++
 6 files changed, 329 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/plat-s3c24xx/s3c2412-iotiming.c

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index 79e18340e07..35c1bde89cf 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -32,9 +32,12 @@ config S3C2412_PM
 	help
 	  Internal config node to apply S3C2412 power management
 
+# Note, the S3C2412 IOtiming support is in plat-s3c24xx
+
 config S3C2412_CPUFREQ
 	bool
 	depends on CPU_FREQ_S3C24XX && CPU_S3C2412
+	select S3C2412_IOTIMING
 	default y
 	help
 	  CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
diff --git a/arch/arm/mach-s3c2412/cpu-freq.c b/arch/arm/mach-s3c2412/cpu-freq.c
index 80b20c33447..21a66178d9b 100644
--- a/arch/arm/mach-s3c2412/cpu-freq.c
+++ b/arch/arm/mach-s3c2412/cpu-freq.c
@@ -185,6 +185,10 @@ static struct s3c_cpufreq_info s3c2412_cpufreq_info = {
 	.set_divs	= s3c2412_cpufreq_setdivs,
 	.calc_divs	= s3c2412_cpufreq_calcdivs,
 
+	.calc_iotiming	= s3c2412_iotiming_calc,
+	.set_iotiming	= s3c2412_iotiming_set,
+	.get_iotiming	= s3c2412_iotiming_get,
+
 	.resume_clocks	= s3c2412_setup_clocks,
 };
 
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index ec9921b6848..f0b9c73fe00 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -157,6 +157,15 @@ config S3C2410_CPUFREQ_UTILS
 	  Internal node to select timing code that is common to the s3c2410
 	  and s3c2440/s3c244 cpu frequency support.
 
+# cpu frequency support common to s3c2412, s3c2413 and s3c2442
+
+config S3C2412_IOTIMING
+	bool
+	depends on CPU_FREQ_S3C24XX && (CPU_S3C2412 || CPU_S3C2443)
+	help
+	  Intel node to select io timing code that is common to the s3c2412
+	  and the s3c2443.
+
 config MACH_SMDK
 	bool
 	help
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index c60317b3491..8759c070fd9 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -40,6 +40,7 @@ obj-$(CONFIG_S3C2410_CLOCK)	+= s3c2410-clock.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C24XX_ADC)	+= adc.o
 obj-$(CONFIG_S3C2410_IOTIMING)	+= s3c2410-iotiming.o
+obj-$(CONFIG_S3C2412_IOTIMING)	+= s3c2412-iotiming.o
 obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o
 
 # device specific setup and/or initialisation
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
index 7938fb0bc38..f02b3c06c1e 100644
--- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
@@ -42,8 +42,44 @@ struct s3c2410_iobank_timing {
 	unsigned char	nwait_en;	/* nWait enabled for bank. */
 };
 
+/**
+ * struct s3c2412_iobank_timing - io timings for PL092 (S3C2412) style IO
+ * @idcy: The idle cycle time between transactions.
+ * @wstrd: nCS release to end of read cycle.
+ * @wstwr: nCS release to end of write cycle.
+ * @wstoen: nCS assertion to nOE assertion time.
+ * @wstwen: nCS assertion to nWE assertion time.
+ * @wstbrd: Burst ready delay.
+ * @smbidcyr: Register cache for smbidcyr value.
+ * @smbwstrd: Register cache for smbwstrd value.
+ * @smbwstwr: Register cache for smbwstwr value.
+ * @smbwstoen: Register cache for smbwstoen value.
+ * @smbwstwen: Register cache for smbwstwen value.
+ * @smbwstbrd: Register cache for smbwstbrd value.
+ *
+ * Timing information for a IO bank on an S3C2412 or similar system which
+ * uses a PL093 block.
+ */
+struct s3c2412_iobank_timing {
+	unsigned int	idcy;
+	unsigned int	wstrd;
+	unsigned int	wstwr;
+	unsigned int	wstoen;
+	unsigned int	wstwen;
+	unsigned int	wstbrd;
+
+	/* register cache */
+	unsigned char	smbidcyr;
+	unsigned char	smbwstrd;
+	unsigned char	smbwstwr;
+	unsigned char	smbwstoen;
+	unsigned char	smbwstwen;
+	unsigned char	smbwstbrd;
+};
+
 union s3c_iobank {
-	  struct s3c2410_iobank_timing	*io_2410;
+	struct s3c2410_iobank_timing	*io_2410;
+	struct s3c2412_iobank_timing	*io_2412;
 };
 
 /**
@@ -174,6 +210,20 @@ extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
 
 extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg);
 
+/* S3C2412 compatible routines */
+
+extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+				struct s3c_iotimings *timings);
+
+extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+				struct s3c_iotimings *timings);
+
+extern int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
+				 struct s3c_iotimings *iot);
+
+extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
+				 struct s3c_iotimings *iot);
+
 #ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG
 #define s3c_freq_dbg(x...) printk(KERN_INFO x)
 #else
diff --git a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
new file mode 100644
index 00000000000..a3648cba0eb
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
@@ -0,0 +1,261 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
+ *
+ * Copyright (c) 2006,2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412/S3C2443 (PL093 based) IO timing support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <linux/amba/pl093.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-s3c2412-mem.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+#include <plat/clock.h>
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+/**
+ * s3c2412_print_timing - print timing infromation via printk.
+ * @pfx: The prefix to print each line with.
+ * @iot: The IO timing information
+ */
+static void s3c2412_print_timing(const char *pfx, struct s3c_iotimings *iot)
+{
+	struct s3c2412_iobank_timing *bt;
+	unsigned int bank;
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bt = iot->bank[bank].io_2412;
+		if (!bt)
+			continue;
+
+		printk(KERN_DEBUG "%s: %d: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
+		       "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n", pfx, bank,
+		       print_ns(bt->idcy),
+		       print_ns(bt->wstrd),
+		       print_ns(bt->wstwr),
+		       print_ns(bt->wstoen),
+		       print_ns(bt->wstwen),
+		       print_ns(bt->wstbrd));
+	}
+}
+
+/**
+ * to_div - turn a cycle length into a divisor setting.
+ * @cyc_tns: The cycle time in 10ths of nanoseconds.
+ * @clk_tns: The clock period in 10ths of nanoseconds.
+ */
+static inline unsigned int to_div(unsigned int cyc_tns, unsigned int clk_tns)
+{
+	return cyc_tns ? DIV_ROUND_UP(cyc_tns, clk_tns) : 0;
+}
+
+/**
+ * calc_timing - calculate timing divisor value and check in range.
+ * @hwtm: The hardware timing in 10ths of nanoseconds.
+ * @clk_tns: The clock period in 10ths of nanoseconds.
+ * @err: Pointer to err variable to update in event of failure.
+ */
+static unsigned int calc_timing(unsigned int hwtm, unsigned int clk_tns,
+				unsigned int *err)
+{
+	unsigned int ret = to_div(hwtm, clk_tns);
+
+	if (ret > 0xf)
+		*err = -EINVAL;
+
+	return ret;
+}
+
+/**
+ * s3c2412_calc_bank - calculate the bank divisor settings.
+ * @cfg: The current frequency configuration.
+ * @bt: The bank timing.
+ */
+static int s3c2412_calc_bank(struct s3c_cpufreq_config *cfg,
+			     struct s3c2412_iobank_timing *bt)
+{
+	unsigned int hclk = cfg->freq.hclk_tns;
+	int err = 0;
+
+	bt->smbidcyr = calc_timing(bt->idcy, hclk, &err);
+	bt->smbwstrd = calc_timing(bt->wstrd, hclk, &err);
+	bt->smbwstwr = calc_timing(bt->wstwr, hclk, &err);
+	bt->smbwstoen = calc_timing(bt->wstoen, hclk, &err);
+	bt->smbwstwen = calc_timing(bt->wstwen, hclk, &err);
+	bt->smbwstbrd = calc_timing(bt->wstbrd, hclk, &err);
+
+	return err;
+}
+
+/**
+ * s3c2412_iotiming_calc - calculate all the bank divisor settings.
+ * @cfg: The current frequency configuration.
+ * @iot: The bank timing information.
+ *
+ * Calculate the timing information for all the banks that are
+ * configured as IO, using s3c2412_calc_bank().
+ */
+int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
+			  struct s3c_iotimings *iot)
+{
+	struct s3c2412_iobank_timing *bt;
+	int bank;
+	int ret;
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bt = iot->bank[bank].io_2412;
+		if (!bt)
+			continue;
+
+		ret = s3c2412_calc_bank(cfg, bt);
+		if (ret) {
+			printk(KERN_ERR "%s: cannot calculate bank %d io\n",
+			       __func__, bank);
+			goto err;
+		}
+	}
+
+	return 0;
+ err:
+	return ret;
+}
+
+/**
+ * s3c2412_iotiming_set - set the timing information
+ * @cfg: The current frequency configuration.
+ * @iot: The bank timing information.
+ *
+ * Set the IO bank information from the details calculated earlier from
+ * calling s3c2412_iotiming_calc().
+ */
+void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
+			  struct s3c_iotimings *iot)
+{
+	struct s3c2412_iobank_timing *bt;
+	void __iomem *regs;
+	int bank;
+
+	/* set the io timings from the specifier */
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bt = iot->bank[bank].io_2412;
+		if (!bt)
+			continue;
+
+		regs = S3C2412_SSMC_BANK(bank);
+
+		__raw_writel(bt->smbidcyr, regs + SMBIDCYR);
+		__raw_writel(bt->smbwstrd, regs + SMBWSTRDR);
+		__raw_writel(bt->smbwstwr, regs + SMBWSTWRR);
+		__raw_writel(bt->smbwstoen, regs + SMBWSTOENR);
+		__raw_writel(bt->smbwstwen, regs + SMBWSTWENR);
+		__raw_writel(bt->smbwstbrd, regs + SMBWSTBRDR);
+	}
+}
+
+static inline unsigned int s3c2412_decode_timing(unsigned int clock, u32 reg)
+{
+	return (reg & 0xf) * clock;
+}
+
+static void s3c2412_iotiming_getbank(struct s3c_cpufreq_config *cfg,
+				     struct s3c2412_iobank_timing *bt,
+				     unsigned int bank)
+{
+	unsigned long clk = cfg->freq.hclk_tns;  /* ssmc clock??? */
+	void __iomem *regs = S3C2412_SSMC_BANK(bank);
+
+	bt->idcy = s3c2412_decode_timing(clk, __raw_readl(regs + SMBIDCYR));
+	bt->wstrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTRDR));
+	bt->wstoen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTOENR));
+	bt->wstwen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTWENR));
+	bt->wstbrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTBRDR));
+}
+
+/**
+ * bank_is_io - return true if bank is (possibly) IO.
+ * @bank: The bank number.
+ * @bankcfg: The value of S3C2412_EBI_BANKCFG.
+ */
+static inline bool bank_is_io(unsigned int bank, u32 bankcfg)
+{
+	if (bank < 2)
+		return true;
+
+	return !(bankcfg & (1 << bank));
+}
+
+int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+			 struct s3c_iotimings *timings)
+{
+	struct s3c2412_iobank_timing *bt;
+	u32 bankcfg = __raw_readl(S3C2412_EBI_BANKCFG);
+	unsigned int bank;
+
+	/* look through all banks to see what is currently set. */
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		if (!bank_is_io(bank, bankcfg))
+			continue;
+
+		bt = kzalloc(sizeof(struct s3c2412_iobank_timing), GFP_KERNEL);
+		if (!bt) {
+			printk(KERN_ERR "%s: no memory for bank\n", __func__);
+			return -ENOMEM;
+		}
+
+		timings->bank[bank].io_2412 = bt;
+		s3c2412_iotiming_getbank(cfg, bt, bank);
+	}
+
+	s3c2412_print_timing("get", timings);
+	return 0;
+}
+
+/* this is in here as it is so small, it doesn't currently warrant a file
+ * to itself. We expect that any s3c24xx needing this is going to also
+ * need the iotiming support.
+ */
+void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+	struct s3c_cpufreq_board *board = cfg->board;
+	u32 refresh;
+
+	WARN_ON(board == NULL);
+
+	/* Reduce both the refresh time (in ns) and the frequency (in MHz)
+	 * down to ensure that we do not overflow 32 bit numbers.
+	 *
+	 * This should work for HCLK up to 133MHz and refresh period up
+	 * to 30usec.
+	 */
+
+	refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
+	refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale  */
+	refresh &= ((1 << 16) - 1);
+
+	s3c_freq_dbg("%s: refresh value %u\n", __func__, (unsigned int)refresh);
+
+	__raw_writel(refresh, S3C2412_REFRESH);
+}
-- 
cgit v1.2.3


From f0176794b6abc2e5239c07a58cf11b6f43d0f185 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:38 +0100
Subject: ARM: S3C2410: Add S3C2410A sysdev.

Add a sysdev S3C2410A sysdev to allow the differentiation
of the S3C2410A from the S3C2410. This is needed for the
CPUFREQ code to enable the extra features and update cpu
specific information.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/dma.c                  | 11 +++++++++++
 arch/arm/mach-s3c2410/irq.c                  | 15 ++++++++++++++-
 arch/arm/mach-s3c2410/pm.c                   | 12 ++++++++++++
 arch/arm/mach-s3c2410/s3c2410.c              | 20 ++++++++++++++++++++
 arch/arm/plat-s3c/include/plat/cpu.h         |  1 +
 arch/arm/plat-s3c24xx/cpu.c                  |  2 +-
 arch/arm/plat-s3c24xx/include/plat/s3c2410.h |  1 +
 7 files changed, 60 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index dbf96e60d99..63b753f56c6 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -164,6 +164,17 @@ static int __init s3c2410_dma_drvinit(void)
 }
 
 arch_initcall(s3c2410_dma_drvinit);
+
+static struct sysdev_driver s3c2410a_dma_driver = {
+	.add	= s3c2410_dma_add,
+};
+
+static int __init s3c2410a_dma_drvinit(void)
+{
+	return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_dma_driver);
+}
+
+arch_initcall(s3c2410a_dma_drvinit);
 #endif
 
 #if defined(CONFIG_CPU_S3C2442)
diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c
index 92150399563..5e2f3533205 100644
--- a/arch/arm/mach-s3c2410/irq.c
+++ b/arch/arm/mach-s3c2410/irq.c
@@ -39,9 +39,22 @@ static struct sysdev_driver s3c2410_irq_driver = {
 	.resume		= s3c24xx_irq_resume,
 };
 
-static int s3c2410_irq_init(void)
+static int __init s3c2410_irq_init(void)
 {
 	return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_irq_driver);
 }
 
 arch_initcall(s3c2410_irq_init);
+
+static struct sysdev_driver s3c2410a_irq_driver = {
+	.add		= s3c2410_irq_add,
+	.suspend	= s3c24xx_irq_suspend,
+	.resume		= s3c24xx_irq_resume,
+};
+
+static int __init s3c2410a_irq_init(void)
+{
+	return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_irq_driver);
+}
+
+arch_initcall(s3c2410a_irq_init);
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index 143e08a599d..966119c8efe 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -119,6 +119,18 @@ static int __init s3c2410_pm_drvinit(void)
 }
 
 arch_initcall(s3c2410_pm_drvinit);
+
+static struct sysdev_driver s3c2410a_pm_driver = {
+	.add		= s3c2410_pm_add,
+	.resume		= s3c2410_pm_resume,
+};
+
+static int __init s3c2410a_pm_drvinit(void)
+{
+	return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_pm_driver);
+}
+
+arch_initcall(s3c2410a_pm_drvinit);
 #endif
 
 #if defined(CONFIG_CPU_S3C2440)
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index feb141b1f91..e5724a22c35 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -116,6 +116,13 @@ struct sysdev_class s3c2410_sysclass = {
 	.name = "s3c2410-core",
 };
 
+/* Note, we would have liked to name this s3c2410-core, but we cannot
+ * register two sysdev_class with the same name.
+ */
+struct sysdev_class s3c2410a_sysclass = {
+	.name = "s3c2410a-core",
+};
+
 static struct sys_device s3c2410_sysdev = {
 	.cls		= &s3c2410_sysclass,
 };
@@ -133,9 +140,22 @@ static int __init s3c2410_core_init(void)
 
 core_initcall(s3c2410_core_init);
 
+static int __init s3c2410a_core_init(void)
+{
+	return sysdev_class_register(&s3c2410a_sysclass);
+}
+
+core_initcall(s3c2410a_core_init);
+
 int __init s3c2410_init(void)
 {
 	printk("S3C2410: Initialising architecture\n");
 
 	return sysdev_register(&s3c2410_sysdev);
 }
+
+int __init s3c2410a_init(void)
+{
+	s3c2410_sysdev.cls = &s3c2410a_sysclass;
+	return s3c2410_init();
+}
diff --git a/arch/arm/plat-s3c/include/plat/cpu.h b/arch/arm/plat-s3c/include/plat/cpu.h
index be541cbba07..fbc3d498e02 100644
--- a/arch/arm/plat-s3c/include/plat/cpu.h
+++ b/arch/arm/plat-s3c/include/plat/cpu.h
@@ -65,6 +65,7 @@ extern struct sys_timer s3c24xx_timer;
 /* system device classes */
 
 extern struct sysdev_class s3c2410_sysclass;
+extern struct sysdev_class s3c2410a_sysclass;
 extern struct sysdev_class s3c2412_sysclass;
 extern struct sysdev_class s3c2440_sysclass;
 extern struct sysdev_class s3c2442_sysclass;
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 1932b7e0da1..5447e60f393 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -81,7 +81,7 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.map_io		= s3c2410_map_io,
 		.init_clocks	= s3c2410_init_clocks,
 		.init_uarts	= s3c2410_init_uarts,
-		.init		= s3c2410_init,
+		.init		= s3c2410a_init,
 		.name		= name_s3c2410a
 	},
 	{
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
index a9ac9e29759..b6deeef8f66 100644
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
@@ -14,6 +14,7 @@
 #ifdef CONFIG_CPU_S3C2410
 
 extern  int s3c2410_init(void);
+extern  int s3c2410a_init(void);
 
 extern void s3c2410_map_io(void);
 
-- 
cgit v1.2.3


From ca0b4901d8faaf98cf254e25cd2784bcb21e46d5 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:39 +0100
Subject: ARM: BAST: CPUFREQ: Add board support

Add board support for CPUFREQ with the Simtec BAST board
registering the necessary information with the core.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/mach-bast.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index ce3baba2cd7..d8a26ea92f2 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -59,6 +59,7 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/cpu-freq.h>
 
 #include "usb-simtec.h"
 #include "nor-simtec.h"
@@ -570,6 +571,12 @@ static struct clk *bast_clocks[] __initdata = {
 	&s3c24xx_uclk,
 };
 
+static struct s3c_cpufreq_board __initdata bast_cpufreq = {
+	.refresh	= 7800, /* 7.8usec */
+	.auto_io	= 1,
+	.need_io	= 1,
+};
+
 static void __init bast_map_io(void)
 {
 	/* initialise the clocks */
@@ -608,6 +615,8 @@ static void __init bast_init(void)
 
 	usb_simtec_init();
 	nor_simtec_init();
+
+	s3c_cpufreq_setboard(&bast_cpufreq);
 }
 
 MACHINE_START(BAST, "Simtec-BAST")
-- 
cgit v1.2.3


From ad78759529be38d6aa062233b980095cf74aa7f0 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:40 +0100
Subject: ARM: S3C2410: Add armclk for cpufreq support

Add armclk for use with the cpufreq support and anything
else that may want it. This clock is just a direct
descendant of fclk.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/s3c2410.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index e5724a22c35..91ba42f688a 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -105,11 +105,20 @@ void __init_or_cpufreq s3c2410_setup_clocks(void)
 	s3c24xx_setup_clocks(fclk, hclk, pclk);
 }
 
+/* fake ARMCLK for use with cpufreq, etc. */
+
+static struct clk s3c2410_armclk = {
+	.name	= "armclk",
+	.parent	= &clk_f,
+	.id	= -1,
+};
+
 void __init s3c2410_init_clocks(int xtal)
 {
 	s3c24xx_register_baseclocks(xtal);
 	s3c2410_setup_clocks();
 	s3c2410_baseclk_add();
+	s3c24xx_register_clock(&s3c2410_armclk);
 }
 
 struct sysdev_class s3c2410_sysclass = {
-- 
cgit v1.2.3


From e6d197a6954c8a9ff85727c31ca61fc1da78628a Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:42 +0100
Subject: ARM: S3C: CPUFREQ: Add debugfs support for cpufreq

Add debugfs support for the cpufreq driver to allow
information about the system state to be exported to
the user.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/Kconfig                                   |   6 +
 arch/arm/mach-s3c2410/cpu-freq.c                   |   2 +
 arch/arm/mach-s3c2412/cpu-freq.c                   |   2 +
 arch/arm/plat-s3c24xx/Makefile                     |   1 +
 arch/arm/plat-s3c24xx/cpu-freq-debugfs.c           | 199 +++++++++++++++++++++
 arch/arm/plat-s3c24xx/cpu-freq.c                   |  12 ++
 arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h |  24 +++
 arch/arm/plat-s3c24xx/s3c2410-iotiming.c           |  45 +++++
 arch/arm/plat-s3c24xx/s3c2412-iotiming.c           |  24 +++
 arch/arm/plat-s3c24xx/s3c2440-cpufreq.c            |   2 +
 10 files changed, 317 insertions(+)
 create mode 100644 arch/arm/plat-s3c24xx/cpu-freq-debugfs.c

(limited to 'arch/arm')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c7a83efef0b..f07a4ba281b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1329,6 +1329,12 @@ config CPU_FREQ_S3C24XX_IODEBUG
 	help
 	  Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
 
+config CPU_FREQ_S3C24XX_DEBUGFS
+	bool "Export debugfs for CPUFreq"
+	depends on CPU_FREQ_S3C24XX && DEBUG_FS
+	help
+	  Export status information via debugfs.
+
 endif
 
 source "drivers/cpuidle/Kconfig"
diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c2410/cpu-freq.c
index f2cbdbab0df..9d1186877d0 100644
--- a/arch/arm/mach-s3c2410/cpu-freq.c
+++ b/arch/arm/mach-s3c2410/cpu-freq.c
@@ -111,6 +111,8 @@ static struct s3c_cpufreq_info s3c2410_cpufreq_info = {
 	.set_refresh	= s3c2410_cpufreq_setrefresh,
 	.set_divs	= s3c2410_cpufreq_setdivs,
 	.calc_divs	= s3c2410_cpufreq_calcdivs,
+
+	.debug_io_show	= s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
 };
 
 static int s3c2410_cpufreq_add(struct sys_device *sysdev)
diff --git a/arch/arm/mach-s3c2412/cpu-freq.c b/arch/arm/mach-s3c2412/cpu-freq.c
index 21a66178d9b..eb3ea172133 100644
--- a/arch/arm/mach-s3c2412/cpu-freq.c
+++ b/arch/arm/mach-s3c2412/cpu-freq.c
@@ -190,6 +190,8 @@ static struct s3c_cpufreq_info s3c2412_cpufreq_info = {
 	.get_iotiming	= s3c2412_iotiming_get,
 
 	.resume_clocks	= s3c2412_setup_clocks,
+
+	.debug_io_show  = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs),
 };
 
 static int s3c2412_cpufreq_add(struct sys_device *sysdev)
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 8759c070fd9..f3493751580 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -21,6 +21,7 @@ obj-y				+= clock.o
 obj-$(CONFIG_S3C24XX_DCLK)	+= clock-dclk.o
 
 obj-$(CONFIG_CPU_FREQ_S3C24XX)	+= cpu-freq.o
+obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpu-freq-debugfs.o
 
 # Architecture dependant builds
 
diff --git a/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c b/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
new file mode 100644
index 00000000000..a9276667c2f
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
@@ -0,0 +1,199 @@
+/* linux/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling - debugfs status support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/err.h>
+
+#include <plat/cpu-freq-core.h>
+
+static struct dentry *dbgfs_root;
+static struct dentry *dbgfs_file_io;
+static struct dentry *dbgfs_file_info;
+static struct dentry *dbgfs_file_board;
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+static void show_max(struct seq_file *seq, struct s3c_freq *f)
+{
+	seq_printf(seq, "MAX: F=%lu, H=%lu, P=%lu, A=%lu\n",
+		   f->fclk, f->hclk, f->pclk, f->armclk);
+}
+
+static int board_show(struct seq_file *seq, void *p)
+{
+	struct s3c_cpufreq_config *cfg;
+	struct s3c_cpufreq_board *brd;
+
+	cfg = s3c_cpufreq_getconfig();
+	if (!cfg) {
+		seq_printf(seq, "no configuration registered\n");
+		return 0;
+	}
+
+	brd = cfg->board;
+	if (!brd) {
+		seq_printf(seq, "no board definition set?\n");
+		return 0;
+	}
+
+	seq_printf(seq, "SDRAM refresh %u ns\n", brd->refresh);
+	seq_printf(seq, "auto_io=%u\n", brd->auto_io);
+	seq_printf(seq, "need_io=%u\n", brd->need_io);
+
+	show_max(seq, &brd->max);
+
+
+	return 0;
+}
+
+static int fops_board_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, board_show, NULL);
+}
+
+static const struct file_operations fops_board = {
+	.open		= fops_board_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.owner		= THIS_MODULE,
+};
+
+static int info_show(struct seq_file *seq, void *p)
+{
+	struct s3c_cpufreq_config *cfg;
+
+	cfg = s3c_cpufreq_getconfig();
+	if (!cfg) {
+		seq_printf(seq, "no configuration registered\n");
+		return 0;
+	}
+
+	seq_printf(seq, "  FCLK %ld Hz\n", cfg->freq.fclk);
+	seq_printf(seq, "  HCLK %ld Hz (%lu.%lu ns)\n",
+		   cfg->freq.hclk, print_ns(cfg->freq.hclk_tns));
+	seq_printf(seq, "  PCLK %ld Hz\n", cfg->freq.hclk);
+	seq_printf(seq, "ARMCLK %ld Hz\n", cfg->freq.armclk);
+	seq_printf(seq, "\n");
+
+	show_max(seq, &cfg->max);
+
+	seq_printf(seq, "Divisors: P=%d, H=%d, A=%d, dvs=%s\n",
+		   cfg->divs.h_divisor, cfg->divs.p_divisor,
+		   cfg->divs.arm_divisor, cfg->divs.dvs ? "on" : "off");
+	seq_printf(seq, "\n");
+
+	seq_printf(seq, "lock_pll=%u\n", cfg->lock_pll);
+
+	return 0;
+}
+
+static int fops_info_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, info_show, NULL);
+}
+
+static const struct file_operations fops_info = {
+	.open		= fops_info_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.owner		= THIS_MODULE,
+};
+
+static int io_show(struct seq_file *seq, void *p)
+{
+	void (*show_bank)(struct seq_file *, struct s3c_cpufreq_config *, union s3c_iobank *);
+	struct s3c_cpufreq_config *cfg;
+	struct s3c_iotimings *iot;
+	union s3c_iobank *iob;
+	int bank;
+
+	cfg = s3c_cpufreq_getconfig();
+	if (!cfg) {
+		seq_printf(seq, "no configuration registered\n");
+		return 0;
+	}
+
+	show_bank = cfg->info->debug_io_show;
+	if (!show_bank) {
+		seq_printf(seq, "no code to show bank timing\n");
+		return 0;
+	}
+
+	iot = s3c_cpufreq_getiotimings();
+	if (!iot) {
+		seq_printf(seq, "no io timings registered\n");
+		return 0;
+	}
+
+	seq_printf(seq, "hclk period is %lu.%lu ns\n", print_ns(cfg->freq.hclk_tns));
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		iob = &iot->bank[bank];
+
+		seq_printf(seq, "bank %d: ", bank);
+
+		if (!iob->io_2410) {
+			seq_printf(seq, "nothing set\n");
+			continue;
+		}
+
+		show_bank(seq, cfg, iob);
+	}
+
+	return 0;
+}
+
+static int fops_io_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, io_show, NULL);
+}
+
+static const struct file_operations fops_io = {
+	.open		= fops_io_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.owner		= THIS_MODULE,
+};
+
+
+static int __init s3c_freq_debugfs_init(void)
+{
+	dbgfs_root = debugfs_create_dir("s3c-cpufreq", NULL);
+	if (IS_ERR(dbgfs_root)) {
+		printk(KERN_ERR "%s: error creating debugfs root\n", __func__);
+		return PTR_ERR(dbgfs_root);
+	}
+
+	dbgfs_file_io = debugfs_create_file("io-timing", S_IRUGO, dbgfs_root,
+					    NULL, &fops_io);
+
+	dbgfs_file_info = debugfs_create_file("info", S_IRUGO, dbgfs_root,
+					      NULL, &fops_info);
+
+	dbgfs_file_board = debugfs_create_file("board", S_IRUGO, dbgfs_root,
+					       NULL, &fops_board);
+
+	return 0;
+}
+
+late_initcall(s3c_freq_debugfs_init);
+
diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/plat-s3c24xx/cpu-freq.c
index 40ff7e2569d..4f1b789a117 100644
--- a/arch/arm/plat-s3c24xx/cpu-freq.c
+++ b/arch/arm/plat-s3c24xx/cpu-freq.c
@@ -50,6 +50,18 @@ static struct clk *clk_hclk;
 static struct clk *clk_pclk;
 static struct clk *clk_arm;
 
+#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
+struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void)
+{
+	return &cpu_cur;
+}
+
+struct s3c_iotimings *s3c_cpufreq_getiotimings(void)
+{
+	return &s3c24xx_iotiming;
+}
+#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUGFS */
+
 static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg)
 {
 	unsigned long fclk, pclk, hclk, armclk;
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
index f02b3c06c1e..efeb025affc 100644
--- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
@@ -13,6 +13,8 @@
 
 #include <plat/cpu-freq.h>
 
+struct seq_file;
+
 #define MAX_BANKS (8)
 #define S3C2412_MAX_IO	(8)
 
@@ -181,6 +183,10 @@ struct s3c_cpufreq_info {
 					  struct cpufreq_frequency_table *t,
 					  size_t table_size);
 
+	void		(*debug_io_show)(struct seq_file *seq,
+					 struct s3c_cpufreq_config *cfg,
+					 union s3c_iobank *iob);
+
 	void		(*set_refresh)(struct s3c_cpufreq_config *cfg);
 	void		(*set_fvco)(struct s3c_cpufreq_config *cfg);
 	void		(*set_divs)(struct s3c_cpufreq_config *cfg);
@@ -191,6 +197,24 @@ extern int s3c_cpufreq_register(struct s3c_cpufreq_info *info);
 
 extern int s3c_plltab_register(struct cpufreq_frequency_table *plls, unsigned int plls_no);
 
+/* exports and utilities for debugfs */
+extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void);
+extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void);
+
+extern void s3c2410_iotiming_debugfs(struct seq_file *seq,
+				     struct s3c_cpufreq_config *cfg,
+				     union s3c_iobank *iob);
+
+extern void s3c2412_iotiming_debugfs(struct seq_file *seq,
+				     struct s3c_cpufreq_config *cfg,
+				     union s3c_iobank *iob);
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
+#define s3c_cpufreq_debugfs_call(x) x
+#else
+#define s3c_cpufreq_debugfs_call(x) NULL
+#endif
+
 /* Useful utility functions. */
 
 extern struct clk *s3c_cpufreq_clk_get(struct device *, const char *);
diff --git a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
index 26fe2129cf2..d0a3a145cd4 100644
--- a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
+++ b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/cpufreq.h>
+#include <linux/seq_file.h>
 #include <linux/io.h>
 
 #include <mach/map.h>
@@ -303,6 +304,50 @@ void s3c2410_iotiming_getbank(struct s3c_cpufreq_config *cfg,
 	bt->tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
 }
 
+/**
+ * s3c2410_iotiming_debugfs - debugfs show io bank timing information
+ * @seq: The seq_file to write output to using seq_printf().
+ * @cfg: The current configuration.
+ * @iob: The IO bank information to decode.
+ */
+void s3c2410_iotiming_debugfs(struct seq_file *seq,
+			      struct s3c_cpufreq_config *cfg,
+			      union s3c_iobank *iob)
+{
+	struct s3c2410_iobank_timing *bt = iob->io_2410;
+	unsigned long bankcon = bt->bankcon;
+	unsigned long hclk = cfg->freq.hclk_tns;
+	unsigned int tacs;
+	unsigned int tcos;
+	unsigned int tacc;
+	unsigned int tcoh;
+	unsigned int tcah;
+
+	seq_printf(seq, "BANKCON=0x%08lx\n", bankcon);
+
+	tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT);
+	tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT);
+	tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT);
+	tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT);
+	tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
+
+	seq_printf(seq,
+		   "\tRead: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n",
+		   print_ns(bt->tacs),
+		   print_ns(bt->tcos),
+		   print_ns(bt->tacc),
+		   print_ns(bt->tcoh),
+		   print_ns(bt->tcah));
+
+	seq_printf(seq,
+		   "\t Set: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n",
+		   print_ns(tacs),
+		   print_ns(tcos),
+		   print_ns(tacc),
+		   print_ns(tcoh),
+		   print_ns(tcah));
+}
+
 /**
  * s3c2410_iotiming_calc - Calculate bank timing for frequency change.
  * @cfg: The frequency configuration
diff --git a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
index a3648cba0eb..fd45e47facb 100644
--- a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
+++ b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
@@ -16,6 +16,7 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/cpufreq.h>
+#include <linux/seq_file.h>
 #include <linux/sysdev.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
@@ -108,6 +109,29 @@ static int s3c2412_calc_bank(struct s3c_cpufreq_config *cfg,
 	return err;
 }
 
+/**
+ * s3c2412_iotiming_debugfs - debugfs show io bank timing information
+ * @seq: The seq_file to write output to using seq_printf().
+ * @cfg: The current configuration.
+ * @iob: The IO bank information to decode.
+*/
+void s3c2412_iotiming_debugfs(struct seq_file *seq,
+			      struct s3c_cpufreq_config *cfg,
+			      union s3c_iobank *iob)
+{
+	struct s3c2412_iobank_timing *bt = iob->io_2412;
+
+	seq_printf(seq,
+		   "\tRead: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
+		   "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n",
+		   print_ns(bt->idcy),
+		   print_ns(bt->wstrd),
+		   print_ns(bt->wstwr),
+		   print_ns(bt->wstoen),
+		   print_ns(bt->wstwen),
+		   print_ns(bt->wstbrd));
+}
+
 /**
  * s3c2412_iotiming_calc - calculate all the bank divisor settings.
  * @cfg: The current frequency configuration.
diff --git a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
index c177a20319e..ae2e6c604f2 100644
--- a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
+++ b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
@@ -266,6 +266,8 @@ struct s3c_cpufreq_info s3c2440_cpufreq_info = {
 	.calc_freqtable	= s3c2440_cpufreq_calctable,
 
 	.resume_clocks	= s3c244x_setup_clocks,
+
+	.debug_io_show  = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
 };
 
 static int s3c2440_cpufreq_add(struct sys_device *sysdev)
-- 
cgit v1.2.3


From 2896bda4824c1e4d34852e355916e34671e38a11 Mon Sep 17 00:00:00 2001
From: Peter Korsgaard <jacmet@sunsite.dk>
Date: Wed, 1 Jul 2009 17:47:09 +0200
Subject: ARM: S3C6410: airgoo hmt board support

Add support for the Airgoo HMT (home media terminal) device.
The HMT is a tablet device with a s3c6410, a 7" LCD and a number
of peripheral connections.

For more details of the hardware specs, see:
http://article.gmane.org/gmane.linux.debian.devel.embedded/4307

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[ben-linux@fluff.org: subject rewrite]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6410/Kconfig    |  10 ++
 arch/arm/mach-s3c6410/Makefile   |   3 +-
 arch/arm/mach-s3c6410/mach-hmt.c | 276 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 287 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/mach-s3c6410/mach-hmt.c

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig
index e63aac7f4e5..f9d0f09f976 100644
--- a/arch/arm/mach-s3c6410/Kconfig
+++ b/arch/arm/mach-s3c6410/Kconfig
@@ -97,3 +97,13 @@ config MACH_NCP
 	select S3C64XX_SETUP_I2C1
 	help
           Machine support for the Samsung NCP
+
+config MACH_HMT
+	bool "Airgoo HMT"
+	select CPU_S3C6410
+	select S3C_DEV_FB
+	select S3C_DEV_USB_HOST
+	select S3C64XX_SETUP_FB_24BPP
+	select HAVE_PWM
+	help
+	  Machine support for the Airgoo HMT
diff --git a/arch/arm/mach-s3c6410/Makefile b/arch/arm/mach-s3c6410/Makefile
index 6f9deac8861..3e48c3dbf97 100644
--- a/arch/arm/mach-s3c6410/Makefile
+++ b/arch/arm/mach-s3c6410/Makefile
@@ -23,5 +23,4 @@ obj-$(CONFIG_S3C6410_SETUP_SDHCI)	+= setup-sdhci.o
 obj-$(CONFIG_MACH_ANW6410)	+= mach-anw6410.o
 obj-$(CONFIG_MACH_SMDK6410)	+= mach-smdk6410.o
 obj-$(CONFIG_MACH_NCP)		+= mach-ncp.o
-
-
+obj-$(CONFIG_MACH_HMT)		+= mach-hmt.o
diff --git a/arch/arm/mach-s3c6410/mach-hmt.c b/arch/arm/mach-s3c6410/mach-hmt.c
new file mode 100644
index 00000000000..c5741056193
--- /dev/null
+++ b/arch/arm/mach-s3c6410/mach-hmt.c
@@ -0,0 +1,276 @@
+/* mach-hmt.c - Platform code for Airgoo HMT
+ *
+ * Copyright 2009 Peter Korsgaard <jacmet@sunsite.dk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/leds.h>
+#include <linux/pwm_backlight.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/iic.h>
+#include <plat/fb.h>
+#include <plat/nand.h>
+
+#include <plat/s3c6410.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg hmt_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+};
+
+static int hmt_bl_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(S3C64XX_GPB(4), "lcd backlight enable");
+	if (!ret)
+		ret = gpio_direction_output(S3C64XX_GPB(4), 0);
+
+	return ret;
+}
+
+static int hmt_bl_notify(int brightness)
+{
+	/*
+	 * translate from CIELUV/CIELAB L*->brightness, E.G. from
+	 * perceived luminance to light output. Assumes range 0..25600
+	 */
+	if (brightness < 0x800) {
+		/* Y = Yn * L / 903.3 */
+		brightness = (100*256 * brightness + 231245/2) / 231245;
+	} else {
+		/* Y = Yn * ((L + 16) / 116 )^3 */
+		int t = (brightness*4 + 16*1024 + 58)/116;
+		brightness = 25 * ((t * t * t + 0x100000/2) / 0x100000);
+	}
+
+	gpio_set_value(S3C64XX_GPB(4), brightness);
+
+	return brightness;
+}
+
+static void hmt_bl_exit(struct device *dev)
+{
+	gpio_free(S3C64XX_GPB(4));
+}
+
+static struct platform_pwm_backlight_data hmt_backlight_data = {
+	.pwm_id		= 1,
+	.max_brightness	= 100 * 256,
+	.dft_brightness	= 40 * 256,
+	.pwm_period_ns	= 1000000000 / (100 * 256 * 20),
+	.init		= hmt_bl_init,
+	.notify		= hmt_bl_notify,
+	.exit		= hmt_bl_exit,
+
+};
+
+static struct platform_device hmt_backlight_device = {
+	.name		= "pwm-backlight",
+	.dev		= {
+		.parent	= &s3c_device_timer[1].dev,
+		.platform_data = &hmt_backlight_data,
+	},
+};
+
+static struct s3c_fb_pd_win hmt_fb_win0 = {
+	.win_mode	= {
+		.pixclock	= 41094,
+		.left_margin	= 8,
+		.right_margin	= 13,
+		.upper_margin	= 7,
+		.lower_margin	= 5,
+		.hsync_len	= 3,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata hmt_lcd_pdata __initdata = {
+	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
+	.win[0]		= &hmt_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+static struct mtd_partition hmt_nand_part[] = {
+	[0] = {
+		.name	= "uboot",
+		.size	= SZ_512K,
+		.offset	= 0,
+	},
+	[1] = {
+		.name	= "uboot-env1",
+		.size	= SZ_256K,
+		.offset	= SZ_512K,
+	},
+	[2] = {
+		.name	= "uboot-env2",
+		.size	= SZ_256K,
+		.offset	= SZ_512K + SZ_256K,
+	},
+	[3] = {
+		.name	= "kernel",
+		.size	= SZ_2M,
+		.offset	= SZ_1M,
+	},
+	[4] = {
+		.name	= "rootfs",
+		.size	= MTDPART_SIZ_FULL,
+		.offset	= SZ_1M + SZ_2M,
+	},
+};
+
+static struct s3c2410_nand_set hmt_nand_sets[] = {
+	[0] = {
+		.name		= "nand",
+		.nr_chips	= 1,
+		.nr_partitions	= ARRAY_SIZE(hmt_nand_part),
+		.partitions	= hmt_nand_part,
+	},
+};
+
+static struct s3c2410_platform_nand hmt_nand_info = {
+	.tacls		= 25,
+	.twrph0		= 55,
+	.twrph1		= 40,
+	.nr_sets	= ARRAY_SIZE(hmt_nand_sets),
+	.sets		= hmt_nand_sets,
+};
+
+static struct gpio_led hmt_leds[] = {
+	{ /* left function keys */
+		.name			= "left:blue",
+		.gpio			= S3C64XX_GPO(12),
+		.default_trigger	= "default-on",
+	},
+	{ /* right function keys - red */
+		.name			= "right:red",
+		.gpio			= S3C64XX_GPO(13),
+	},
+	{ /* right function keys - green */
+		.name			= "right:green",
+		.gpio			= S3C64XX_GPO(14),
+	},
+	{ /* right function keys - blue */
+		.name			= "right:blue",
+		.gpio			= S3C64XX_GPO(15),
+		.default_trigger	= "default-on",
+	},
+};
+
+static struct gpio_led_platform_data hmt_led_data = {
+	.num_leds = ARRAY_SIZE(hmt_leds),
+	.leds = hmt_leds,
+};
+
+static struct platform_device hmt_leds_device = {
+	.name			= "leds-gpio",
+	.id			= -1,
+	.dev.platform_data	= &hmt_led_data,
+};
+
+static struct map_desc hmt_iodesc[] = {};
+
+static struct platform_device *hmt_devices[] __initdata = {
+	&s3c_device_i2c0,
+	&s3c_device_nand,
+	&s3c_device_fb,
+	&s3c_device_usb,
+	&s3c_device_timer[1],
+	&hmt_backlight_device,
+	&hmt_leds_device,
+};
+
+static void __init hmt_map_io(void)
+{
+	s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs));
+}
+
+static void __init hmt_machine_init(void)
+{
+	s3c_i2c0_set_platdata(NULL);
+	s3c_fb_set_platdata(&hmt_lcd_pdata);
+	s3c_device_nand.dev.platform_data = &hmt_nand_info;
+
+	gpio_request(S3C64XX_GPC(7), "usb power");
+	gpio_direction_output(S3C64XX_GPC(7), 0);
+	gpio_request(S3C64XX_GPM(0), "usb power");
+	gpio_direction_output(S3C64XX_GPM(0), 1);
+	gpio_request(S3C64XX_GPK(7), "usb power");
+	gpio_direction_output(S3C64XX_GPK(7), 1);
+	gpio_request(S3C64XX_GPF(13), "usb power");
+	gpio_direction_output(S3C64XX_GPF(13), 1);
+
+	platform_add_devices(hmt_devices, ARRAY_SIZE(hmt_devices));
+}
+
+MACHINE_START(HMT, "Airgoo-HMT")
+	/* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= hmt_map_io,
+	.init_machine	= hmt_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
-- 
cgit v1.2.3


From 14077ea63b5aea1db0142c1085d24aa0d11b9d36 Mon Sep 17 00:00:00 2001
From: Peter Korsgaard <jacmet@sunsite.dk>
Date: Wed, 1 Jul 2009 17:47:06 +0200
Subject: ARM: S3C: move s3c_device_nand from plat-s3c24xx to plat-s3c

Move the s3c_device_nand platform device from plat-s3c24xx to plat-s3c,
now that the nand driver also support the s3c64xx devices.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/include/mach/map.h |  1 +
 arch/arm/mach-s3c24a0/include/mach/map.h |  1 +
 arch/arm/mach-s3c6400/include/mach/map.h |  2 ++
 arch/arm/mach-s3c6400/s3c6400.c          |  2 ++
 arch/arm/mach-s3c6410/cpu.c              |  2 ++
 arch/arm/plat-s3c/Makefile               |  1 +
 arch/arm/plat-s3c/dev-nand.c             | 30 ++++++++++++++++++++++++++++++
 arch/arm/plat-s3c24xx/devs.c             | 19 -------------------
 8 files changed, 39 insertions(+), 19 deletions(-)
 create mode 100644 arch/arm/plat-s3c/dev-nand.c

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
index e99b212cb1c..e9821850065 100644
--- a/arch/arm/mach-s3c2410/include/mach/map.h
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -103,5 +103,6 @@
 #define S3C_PA_UART	    S3C24XX_PA_UART
 #define S3C_PA_USBHOST	S3C2410_PA_USBHOST
 #define S3C_PA_HSMMC0	    S3C2443_PA_HSMMC
+#define S3C_PA_NAND	    S3C24XX_PA_NAND
 
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s3c24a0/include/mach/map.h b/arch/arm/mach-s3c24a0/include/mach/map.h
index a01132717e3..79e4d93ea2b 100644
--- a/arch/arm/mach-s3c24a0/include/mach/map.h
+++ b/arch/arm/mach-s3c24a0/include/mach/map.h
@@ -81,5 +81,6 @@
 
 #define S3C_PA_UART		S3C24A0_PA_UART
 #define S3C_PA_IIC		S3C24A0_PA_IIC
+#define S3C_PA_NAND		S3C24XX_PA_NAND
 
 #endif /* __ASM_ARCH_24A0_MAP_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index 5057d9948d3..fba241a7198 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -38,6 +38,7 @@
 #define S3C_VA_UART2		S3C_VA_UARTx(2)
 #define S3C_VA_UART3		S3C_VA_UARTx(3)
 
+#define S3C64XX_PA_NAND		(0x70200000)
 #define S3C64XX_PA_FB		(0x77100000)
 #define S3C64XX_PA_USB_HSOTG	(0x7C000000)
 #define S3C64XX_PA_WATCHDOG	(0x7E004000)
@@ -72,6 +73,7 @@
 #define S3C_PA_HSMMC2		S3C64XX_PA_HSMMC2
 #define S3C_PA_IIC		S3C64XX_PA_IIC0
 #define S3C_PA_IIC1		S3C64XX_PA_IIC1
+#define S3C_PA_NAND		S3C64XX_PA_NAND
 #define S3C_PA_FB		S3C64XX_PA_FB
 #define S3C_PA_USBHOST		S3C64XX_PA_USBHOST
 #define S3C_PA_USB_HSOTG	S3C64XX_PA_USB_HSOTG
diff --git a/arch/arm/mach-s3c6400/s3c6400.c b/arch/arm/mach-s3c6400/s3c6400.c
index 1ece887d90b..b42bdd0f213 100644
--- a/arch/arm/mach-s3c6400/s3c6400.c
+++ b/arch/arm/mach-s3c6400/s3c6400.c
@@ -48,6 +48,8 @@ void __init s3c6400_map_io(void)
 
 	/* the i2c devices are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
+
+	s3c_device_nand.name = "s3c6400-nand";
 }
 
 void __init s3c6400_init_clocks(int xtal)
diff --git a/arch/arm/mach-s3c6410/cpu.c b/arch/arm/mach-s3c6410/cpu.c
index ade904de889..9b67c663d9d 100644
--- a/arch/arm/mach-s3c6410/cpu.c
+++ b/arch/arm/mach-s3c6410/cpu.c
@@ -62,6 +62,8 @@ void __init s3c6410_map_io(void)
 	/* the i2c devices are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
 	s3c_i2c1_setname("s3c2440-i2c");
+
+	s3c_device_nand.name = "s3c6400-nand";
 }
 
 void __init s3c6410_init_clocks(int xtal)
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index 0761766b183..d0b4a0fda5c 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -38,3 +38,4 @@ obj-$(CONFIG_SND_S3C64XX_SOC_I2S)	+= dev-audio.o
 obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
 obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
 obj-$(CONFIG_S3C_DEV_USB_HSOTG)	+= dev-usb-hsotg.o
+obj-y				+= dev-nand.o
diff --git a/arch/arm/plat-s3c/dev-nand.c b/arch/arm/plat-s3c/dev-nand.c
new file mode 100644
index 00000000000..4e532373243
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-nand.c
@@ -0,0 +1,30 @@
+/*
+ * S3C series device definition for nand device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <mach/map.h>
+#include <plat/devs.h>
+
+static struct resource s3c_nand_resource[] = {
+	[0] = {
+		.start = S3C_PA_NAND,
+		.end   = S3C_PA_NAND + SZ_1M,
+		.flags = IORESOURCE_MEM,
+	}
+};
+
+struct platform_device s3c_device_nand = {
+	.name		  = "s3c2410-nand",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c_nand_resource),
+	.resource	  = s3c_nand_resource,
+};
+
+EXPORT_SYMBOL(s3c_device_nand);
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 4eb378c89a3..20c114d6f61 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -180,25 +180,6 @@ void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
 	}
 }
 
-/* NAND Controller */
-
-static struct resource s3c_nand_resource[] = {
-	[0] = {
-		.start = S3C24XX_PA_NAND,
-		.end   = S3C24XX_PA_NAND + S3C24XX_SZ_NAND - 1,
-		.flags = IORESOURCE_MEM,
-	}
-};
-
-struct platform_device s3c_device_nand = {
-	.name		  = "s3c2410-nand",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_nand_resource),
-	.resource	  = s3c_nand_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_nand);
-
 /* USB Device (Gadget)*/
 
 static struct resource s3c_usbgadget_resource[] = {
-- 
cgit v1.2.3


From b5ead1cda64336b589eb4353e00f69c818fb6603 Mon Sep 17 00:00:00 2001
From: Peter Korsgaard <jacmet@sunsite.dk>
Date: Wed, 1 Jul 2009 17:47:07 +0200
Subject: ARM: S3C: move timer/pwm handling from plat-s3c24xx to plat-s3c

The s3c64xx devices use the same hardware core as s3c24xx, so move
the timer/pwm handling to plat-s3c so it can be used by both.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/Makefile     |   4 +
 arch/arm/plat-s3c/pwm.c        | 406 +++++++++++++++++++++++++++++++++++++++++
 arch/arm/plat-s3c24xx/Makefile |   1 -
 arch/arm/plat-s3c24xx/pwm.c    | 405 ----------------------------------------
 4 files changed, 410 insertions(+), 406 deletions(-)
 create mode 100644 arch/arm/plat-s3c/pwm.c
 delete mode 100644 arch/arm/plat-s3c24xx/pwm.c

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index d0b4a0fda5c..3e27720ae35 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -28,6 +28,10 @@ obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM)		+= pm-gpio.o
 obj-$(CONFIG_S3C2410_PM_CHECK)	+= pm-check.o
 
+# PWM support
+
+obj-$(CONFIG_HAVE_PWM)		+= pwm.o
+
 # devices
 
 obj-$(CONFIG_S3C_DEV_HSMMC)	+= dev-hsmmc.o
diff --git a/arch/arm/plat-s3c/pwm.c b/arch/arm/plat-s3c/pwm.c
new file mode 100644
index 00000000000..f3d37ac5595
--- /dev/null
+++ b/arch/arm/plat-s3c/pwm.c
@@ -0,0 +1,406 @@
+/* arch/arm/plat-s3c/pwm.c
+ *
+ * Copyright (c) 2007 Ben Dooks
+ * Copyright (c) 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
+ *
+ * S3C series PWM device core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+#include <plat/regs-timer.h>
+
+struct pwm_device {
+	struct list_head	 list;
+	struct platform_device	*pdev;
+
+	struct clk		*clk_div;
+	struct clk		*clk;
+	const char		*label;
+
+	unsigned int		 period_ns;
+	unsigned int		 duty_ns;
+
+	unsigned char		 tcon_base;
+	unsigned char		 running;
+	unsigned char		 use_count;
+	unsigned char		 pwm_id;
+};
+
+#define pwm_dbg(_pwm, msg...) dev_dbg(&(_pwm)->pdev->dev, msg)
+
+static struct clk *clk_scaler[2];
+
+/* Standard setup for a timer block. */
+
+#define TIMER_RESOURCE_SIZE (1)
+
+#define TIMER_RESOURCE(_tmr, _irq)			\
+	(struct resource [TIMER_RESOURCE_SIZE]) {	\
+		[0] = {					\
+			.start	= _irq,			\
+			.end	= _irq,			\
+			.flags	= IORESOURCE_IRQ	\
+		}					\
+	}
+
+#define DEFINE_S3C_TIMER(_tmr_no, _irq)			\
+	.name		= "s3c24xx-pwm",		\
+	.id		= _tmr_no,			\
+	.num_resources	= TIMER_RESOURCE_SIZE,		\
+	.resource	= TIMER_RESOURCE(_tmr_no, _irq),	\
+
+/* since we already have an static mapping for the timer, we do not
+ * bother setting any IO resource for the base.
+ */
+
+struct platform_device s3c_device_timer[] = {
+	[0] = { DEFINE_S3C_TIMER(0, IRQ_TIMER0) },
+	[1] = { DEFINE_S3C_TIMER(1, IRQ_TIMER1) },
+	[2] = { DEFINE_S3C_TIMER(2, IRQ_TIMER2) },
+	[3] = { DEFINE_S3C_TIMER(3, IRQ_TIMER3) },
+	[4] = { DEFINE_S3C_TIMER(4, IRQ_TIMER4) },
+};
+
+static inline int pwm_is_tdiv(struct pwm_device *pwm)
+{
+	return clk_get_parent(pwm->clk) == pwm->clk_div;
+}
+
+static DEFINE_MUTEX(pwm_lock);
+static LIST_HEAD(pwm_list);
+
+struct pwm_device *pwm_request(int pwm_id, const char *label)
+{
+	struct pwm_device *pwm;
+	int found = 0;
+
+	mutex_lock(&pwm_lock);
+
+	list_for_each_entry(pwm, &pwm_list, list) {
+		if (pwm->pwm_id == pwm_id) {
+			found = 1;
+			break;
+		}
+	}
+
+	if (found) {
+		if (pwm->use_count == 0) {
+			pwm->use_count = 1;
+			pwm->label = label;
+		} else
+			pwm = ERR_PTR(-EBUSY);
+	} else
+		pwm = ERR_PTR(-ENOENT);
+
+	mutex_unlock(&pwm_lock);
+	return pwm;
+}
+
+EXPORT_SYMBOL(pwm_request);
+
+
+void pwm_free(struct pwm_device *pwm)
+{
+	mutex_lock(&pwm_lock);
+
+	if (pwm->use_count) {
+		pwm->use_count--;
+		pwm->label = NULL;
+	} else
+		printk(KERN_ERR "PWM%d device already freed\n", pwm->pwm_id);
+
+	mutex_unlock(&pwm_lock);
+}
+
+EXPORT_SYMBOL(pwm_free);
+
+#define pwm_tcon_start(pwm) (1 << (pwm->tcon_base + 0))
+#define pwm_tcon_invert(pwm) (1 << (pwm->tcon_base + 2))
+#define pwm_tcon_autoreload(pwm) (1 << (pwm->tcon_base + 3))
+#define pwm_tcon_manulupdate(pwm) (1 << (pwm->tcon_base + 1))
+
+int pwm_enable(struct pwm_device *pwm)
+{
+	unsigned long flags;
+	unsigned long tcon;
+
+	local_irq_save(flags);
+
+	tcon = __raw_readl(S3C2410_TCON);
+	tcon |= pwm_tcon_start(pwm);
+	__raw_writel(tcon, S3C2410_TCON);
+
+	local_irq_restore(flags);
+
+	pwm->running = 1;
+	return 0;
+}
+
+EXPORT_SYMBOL(pwm_enable);
+
+void pwm_disable(struct pwm_device *pwm)
+{
+	unsigned long flags;
+	unsigned long tcon;
+
+	local_irq_save(flags);
+
+	tcon = __raw_readl(S3C2410_TCON);
+	tcon &= ~pwm_tcon_start(pwm);
+	__raw_writel(tcon, S3C2410_TCON);
+
+	local_irq_restore(flags);
+
+	pwm->running = 0;
+}
+
+EXPORT_SYMBOL(pwm_disable);
+
+static unsigned long pwm_calc_tin(struct pwm_device *pwm, unsigned long freq)
+{
+	unsigned long tin_parent_rate;
+	unsigned int div;
+
+	tin_parent_rate = clk_get_rate(clk_get_parent(pwm->clk_div));
+	pwm_dbg(pwm, "tin parent at %lu\n", tin_parent_rate);
+
+	for (div = 2; div <= 16; div *= 2) {
+		if ((tin_parent_rate / (div << 16)) < freq)
+			return tin_parent_rate / div;
+	}
+
+	return tin_parent_rate / 16;
+}
+
+#define NS_IN_HZ (1000000000UL)
+
+int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+	unsigned long tin_rate;
+	unsigned long tin_ns;
+	unsigned long period;
+	unsigned long flags;
+	unsigned long tcon;
+	unsigned long tcnt;
+	long tcmp;
+
+	/* We currently avoid using 64bit arithmetic by using the
+	 * fact that anything faster than 1Hz is easily representable
+	 * by 32bits. */
+
+	if (period_ns > NS_IN_HZ || duty_ns > NS_IN_HZ)
+		return -ERANGE;
+
+	if (duty_ns > period_ns)
+		return -EINVAL;
+
+	if (period_ns == pwm->period_ns &&
+	    duty_ns == pwm->duty_ns)
+		return 0;
+
+	/* The TCMP and TCNT can be read without a lock, they're not
+	 * shared between the timers. */
+
+	tcmp = __raw_readl(S3C2410_TCMPB(pwm->pwm_id));
+	tcnt = __raw_readl(S3C2410_TCNTB(pwm->pwm_id));
+
+	period = NS_IN_HZ / period_ns;
+
+	pwm_dbg(pwm, "duty_ns=%d, period_ns=%d (%lu)\n",
+		duty_ns, period_ns, period);
+
+	/* Check to see if we are changing the clock rate of the PWM */
+
+	if (pwm->period_ns != period_ns) {
+		if (pwm_is_tdiv(pwm)) {
+			tin_rate = pwm_calc_tin(pwm, period);
+			clk_set_rate(pwm->clk_div, tin_rate);
+		} else
+			tin_rate = clk_get_rate(pwm->clk);
+
+		pwm->period_ns = period_ns;
+
+		pwm_dbg(pwm, "tin_rate=%lu\n", tin_rate);
+
+		tin_ns = NS_IN_HZ / tin_rate;
+		tcnt = period_ns / tin_ns;
+	} else
+		tin_ns = NS_IN_HZ / clk_get_rate(pwm->clk);
+
+	/* Note, counters count down */
+
+	tcmp = duty_ns / tin_ns;
+	tcmp = tcnt - tcmp;
+
+	pwm_dbg(pwm, "tin_ns=%lu, tcmp=%ld/%lu\n", tin_ns, tcmp, tcnt);
+
+	if (tcmp < 0)
+		tcmp = 0;
+
+	/* Update the PWM register block. */
+
+	local_irq_save(flags);
+
+	__raw_writel(tcmp, S3C2410_TCMPB(pwm->pwm_id));
+	__raw_writel(tcnt, S3C2410_TCNTB(pwm->pwm_id));
+
+	tcon = __raw_readl(S3C2410_TCON);
+	tcon |= pwm_tcon_manulupdate(pwm);
+	tcon |= pwm_tcon_autoreload(pwm);
+	__raw_writel(tcon, S3C2410_TCON);
+
+	tcon &= ~pwm_tcon_manulupdate(pwm);
+	__raw_writel(tcon, S3C2410_TCON);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(pwm_config);
+
+static int pwm_register(struct pwm_device *pwm)
+{
+	pwm->duty_ns = -1;
+	pwm->period_ns = -1;
+
+	mutex_lock(&pwm_lock);
+	list_add_tail(&pwm->list, &pwm_list);
+	mutex_unlock(&pwm_lock);
+
+	return 0;
+}
+
+static int s3c_pwm_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct pwm_device *pwm;
+	unsigned long flags;
+	unsigned long tcon;
+	unsigned int id = pdev->id;
+	int ret;
+
+	if (id == 4) {
+		dev_err(dev, "TIMER4 is currently not supported\n");
+		return -ENXIO;
+	}
+
+	pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
+	if (pwm == NULL) {
+		dev_err(dev, "failed to allocate pwm_device\n");
+		return -ENOMEM;
+	}
+
+	pwm->pdev = pdev;
+	pwm->pwm_id = id;
+
+	/* calculate base of control bits in TCON */
+	pwm->tcon_base = id == 0 ? 0 : (id * 4) + 4;
+
+	pwm->clk = clk_get(dev, "pwm-tin");
+	if (IS_ERR(pwm->clk)) {
+		dev_err(dev, "failed to get pwm tin clk\n");
+		ret = PTR_ERR(pwm->clk);
+		goto err_alloc;
+	}
+
+	pwm->clk_div = clk_get(dev, "pwm-tdiv");
+	if (IS_ERR(pwm->clk_div)) {
+		dev_err(dev, "failed to get pwm tdiv clk\n");
+		ret = PTR_ERR(pwm->clk_div);
+		goto err_clk_tin;
+	}
+
+	local_irq_save(flags);
+
+	tcon = __raw_readl(S3C2410_TCON);
+	tcon |= pwm_tcon_invert(pwm);
+	__raw_writel(tcon, S3C2410_TCON);
+
+	local_irq_restore(flags);
+
+
+	ret = pwm_register(pwm);
+	if (ret) {
+		dev_err(dev, "failed to register pwm\n");
+		goto err_clk_tdiv;
+	}
+
+	pwm_dbg(pwm, "config bits %02x\n",
+		(__raw_readl(S3C2410_TCON) >> pwm->tcon_base) & 0x0f);
+
+	dev_info(dev, "tin at %lu, tdiv at %lu, tin=%sclk, base %d\n",
+		 clk_get_rate(pwm->clk),
+		 clk_get_rate(pwm->clk_div),
+		 pwm_is_tdiv(pwm) ? "div" : "ext", pwm->tcon_base);
+
+	platform_set_drvdata(pdev, pwm);
+	return 0;
+
+ err_clk_tdiv:
+	clk_put(pwm->clk_div);
+
+ err_clk_tin:
+	clk_put(pwm->clk);
+
+ err_alloc:
+	kfree(pwm);
+	return ret;
+}
+
+static int s3c_pwm_remove(struct platform_device *pdev)
+{
+	struct pwm_device *pwm = platform_get_drvdata(pdev);
+
+	clk_put(pwm->clk_div);
+	clk_put(pwm->clk);
+	kfree(pwm);
+
+	return 0;
+}
+
+static struct platform_driver s3c_pwm_driver = {
+	.driver		= {
+		.name	= "s3c24xx-pwm",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= s3c_pwm_probe,
+	.remove		= __devexit_p(s3c_pwm_remove),
+};
+
+static int __init pwm_init(void)
+{
+	int ret;
+
+	clk_scaler[0] = clk_get(NULL, "pwm-scaler0");
+	clk_scaler[1] = clk_get(NULL, "pwm-scaler1");
+
+	if (IS_ERR(clk_scaler[0]) || IS_ERR(clk_scaler[1])) {
+		printk(KERN_ERR "%s: failed to get scaler clocks\n", __func__);
+		return -EINVAL;
+	}
+
+	ret = platform_driver_register(&s3c_pwm_driver);
+	if (ret)
+		printk(KERN_ERR "%s: failed to add pwm driver\n", __func__);
+
+	return ret;
+}
+
+arch_initcall(pwm_init);
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 579a165c282..0807831c992 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -29,7 +29,6 @@ obj-$(CONFIG_PM_SIMTEC)		+= pm-simtec.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM)		+= irq-pm.o
 obj-$(CONFIG_PM)		+= sleep.o
-obj-$(CONFIG_S3C24XX_PWM)	+= pwm.o
 obj-$(CONFIG_S3C2410_CLOCK)	+= s3c2410-clock.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C24XX_ADC)	+= adc.o
diff --git a/arch/arm/plat-s3c24xx/pwm.c b/arch/arm/plat-s3c24xx/pwm.c
deleted file mode 100644
index 0120b760315..00000000000
--- a/arch/arm/plat-s3c24xx/pwm.c
+++ /dev/null
@@ -1,405 +0,0 @@
-/* arch/arm/plat-s3c24xx/pwm.c
- *
- * Copyright (c) 2007 Ben Dooks
- * Copyright (c) 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
- *
- * S3C24XX PWM device core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
-*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/pwm.h>
-
-#include <mach/irqs.h>
-
-#include <plat/devs.h>
-#include <plat/regs-timer.h>
-
-struct pwm_device {
-	struct list_head	 list;
-	struct platform_device	*pdev;
-
-	struct clk		*clk_div;
-	struct clk		*clk;
-	const char		*label;
-
-	unsigned int		 period_ns;
-	unsigned int		 duty_ns;
-
-	unsigned char		 tcon_base;
-	unsigned char		 running;
-	unsigned char		 use_count;
-	unsigned char		 pwm_id;
-};
-
-#define pwm_dbg(_pwm, msg...) dev_dbg(&(_pwm)->pdev->dev, msg)
-
-static struct clk *clk_scaler[2];
-
-/* Standard setup for a timer block. */
-
-#define TIMER_RESOURCE_SIZE (1)
-
-#define TIMER_RESOURCE(_tmr, _irq)			\
-	(struct resource [TIMER_RESOURCE_SIZE]) {	\
-		[0] = {					\
-			.start	= _irq,			\
-			.end	= _irq,			\
-			.flags	= IORESOURCE_IRQ	\
-		}					\
-	}
-
-#define DEFINE_S3C_TIMER(_tmr_no, _irq)			\
-	.name		= "s3c24xx-pwm",		\
-	.id		= _tmr_no,			\
-	.num_resources	= TIMER_RESOURCE_SIZE,		\
-	.resource	= TIMER_RESOURCE(_tmr_no, _irq),	\
-
-/* since we already have an static mapping for the timer, we do not
- * bother setting any IO resource for the base.
- */
-
-struct platform_device s3c_device_timer[] = {
-	[0] = { DEFINE_S3C_TIMER(0, IRQ_TIMER0) },
-	[1] = { DEFINE_S3C_TIMER(1, IRQ_TIMER1) },
-	[2] = { DEFINE_S3C_TIMER(2, IRQ_TIMER2) },
-	[3] = { DEFINE_S3C_TIMER(3, IRQ_TIMER3) },
-	[4] = { DEFINE_S3C_TIMER(4, IRQ_TIMER4) },
-};
-
-static inline int pwm_is_tdiv(struct pwm_device *pwm)
-{
-	return clk_get_parent(pwm->clk) == pwm->clk_div;
-}
-
-static DEFINE_MUTEX(pwm_lock);
-static LIST_HEAD(pwm_list);
-
-struct pwm_device *pwm_request(int pwm_id, const char *label)
-{
-	struct pwm_device *pwm;
-	int found = 0;
-
-	mutex_lock(&pwm_lock);
-
-	list_for_each_entry(pwm, &pwm_list, list) {
-		if (pwm->pwm_id == pwm_id) {
-			found = 1;
-			break;
-		}
-	}
-
-	if (found) {
-		if (pwm->use_count == 0) {
-			pwm->use_count = 1;
-			pwm->label = label;
-		} else
-			pwm = ERR_PTR(-EBUSY);
-	} else
-		pwm = ERR_PTR(-ENOENT);
-
-	mutex_unlock(&pwm_lock);
-	return pwm;
-}
-
-EXPORT_SYMBOL(pwm_request);
-
-
-void pwm_free(struct pwm_device *pwm)
-{
-	mutex_lock(&pwm_lock);
-
-	if (pwm->use_count) {
-		pwm->use_count--;
-		pwm->label = NULL;
-	} else
-		printk(KERN_ERR "PWM%d device already freed\n", pwm->pwm_id);
-
-	mutex_unlock(&pwm_lock);
-}
-
-EXPORT_SYMBOL(pwm_free);
-
-#define pwm_tcon_start(pwm) (1 << (pwm->tcon_base + 0))
-#define pwm_tcon_invert(pwm) (1 << (pwm->tcon_base + 2))
-#define pwm_tcon_autoreload(pwm) (1 << (pwm->tcon_base + 3))
-#define pwm_tcon_manulupdate(pwm) (1 << (pwm->tcon_base + 1))
-
-int pwm_enable(struct pwm_device *pwm)
-{
-	unsigned long flags;
-	unsigned long tcon;
-
-	local_irq_save(flags);
-
-	tcon = __raw_readl(S3C2410_TCON);
-	tcon |= pwm_tcon_start(pwm);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	local_irq_restore(flags);
-
-	pwm->running = 1;
-	return 0;
-}
-
-EXPORT_SYMBOL(pwm_enable);
-
-void pwm_disable(struct pwm_device *pwm)
-{
-	unsigned long flags;
-	unsigned long tcon;
-
-	local_irq_save(flags);
-
-	tcon = __raw_readl(S3C2410_TCON);
-	tcon &= ~pwm_tcon_start(pwm);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	local_irq_restore(flags);
-
-	pwm->running = 0;
-}
-
-EXPORT_SYMBOL(pwm_disable);
-
-static unsigned long pwm_calc_tin(struct pwm_device *pwm, unsigned long freq)
-{
-	unsigned long tin_parent_rate;
-	unsigned int div;
-
-	tin_parent_rate = clk_get_rate(clk_get_parent(pwm->clk_div));
-	pwm_dbg(pwm, "tin parent at %lu\n", tin_parent_rate);
-
-	for (div = 2; div <= 16; div *= 2) {
-		if ((tin_parent_rate / (div << 16)) < freq)
-			return tin_parent_rate / div;
-	}
-
-	return tin_parent_rate / 16;
-}
-
-#define NS_IN_HZ (1000000000UL)
-
-int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
-{
-	unsigned long tin_rate;
-	unsigned long tin_ns;
-	unsigned long period;
-	unsigned long flags;
-	unsigned long tcon;
-	unsigned long tcnt;
-	long tcmp;
-
-	/* We currently avoid using 64bit arithmetic by using the
-	 * fact that anything faster than 1Hz is easily representable
-	 * by 32bits. */
-
-	if (period_ns > NS_IN_HZ || duty_ns > NS_IN_HZ)
-		return -ERANGE;
-
-	if (duty_ns > period_ns)
-		return -EINVAL;
-
-	if (period_ns == pwm->period_ns &&
-	    duty_ns == pwm->duty_ns)
-		return 0;
-
-	/* The TCMP and TCNT can be read without a lock, they're not
-	 * shared between the timers. */
-
-	tcmp = __raw_readl(S3C2410_TCMPB(pwm->pwm_id));
-	tcnt = __raw_readl(S3C2410_TCNTB(pwm->pwm_id));
-
-	period = NS_IN_HZ / period_ns;
-
-	pwm_dbg(pwm, "duty_ns=%d, period_ns=%d (%lu)\n",
-		duty_ns, period_ns, period);
-
-	/* Check to see if we are changing the clock rate of the PWM */
-
-	if (pwm->period_ns != period_ns) {
-		if (pwm_is_tdiv(pwm)) {
-			tin_rate = pwm_calc_tin(pwm, period);
-			clk_set_rate(pwm->clk_div, tin_rate);
-		} else
-			tin_rate = clk_get_rate(pwm->clk);
-
-		pwm->period_ns = period_ns;
-
-		pwm_dbg(pwm, "tin_rate=%lu\n", tin_rate);
-
-		tin_ns = NS_IN_HZ / tin_rate;
-		tcnt = period_ns / tin_ns;
-	} else
-		tin_ns = NS_IN_HZ / clk_get_rate(pwm->clk);
-
-	/* Note, counters count down */
-
-	tcmp = duty_ns / tin_ns;
-	tcmp = tcnt - tcmp;
-
-	pwm_dbg(pwm, "tin_ns=%lu, tcmp=%ld/%lu\n", tin_ns, tcmp, tcnt);
-
-	if (tcmp < 0)
-		tcmp = 0;
-
-	/* Update the PWM register block. */
-
-	local_irq_save(flags);
-
-	__raw_writel(tcmp, S3C2410_TCMPB(pwm->pwm_id));
-	__raw_writel(tcnt, S3C2410_TCNTB(pwm->pwm_id));
-
-	tcon = __raw_readl(S3C2410_TCON);
-	tcon |= pwm_tcon_manulupdate(pwm);
-	tcon |= pwm_tcon_autoreload(pwm);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	tcon &= ~pwm_tcon_manulupdate(pwm);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-EXPORT_SYMBOL(pwm_config);
-
-static int pwm_register(struct pwm_device *pwm)
-{
-	pwm->duty_ns = -1;
-	pwm->period_ns = -1;
-
-	mutex_lock(&pwm_lock);
-	list_add_tail(&pwm->list, &pwm_list);
-	mutex_unlock(&pwm_lock);
-
-	return 0;
-}
-
-static int s3c_pwm_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct pwm_device *pwm;
-	unsigned long flags;
-	unsigned long tcon;
-	unsigned int id = pdev->id;
-	int ret;
-
-	if (id == 4) {
-		dev_err(dev, "TIMER4 is currently not supported\n");
-		return -ENXIO;
-	}
-
-	pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
-	if (pwm == NULL) {
-		dev_err(dev, "failed to allocate pwm_device\n");
-		return -ENOMEM;
-	}
-
-	pwm->pdev = pdev;
-	pwm->pwm_id = id;
-
-	/* calculate base of control bits in TCON */
-	pwm->tcon_base = id == 0 ? 0 : (id * 4) + 4;
-
-	pwm->clk = clk_get(dev, "pwm-tin");
-	if (IS_ERR(pwm->clk)) {
-		dev_err(dev, "failed to get pwm tin clk\n");
-		ret = PTR_ERR(pwm->clk);
-		goto err_alloc;
-	}
-
-	pwm->clk_div = clk_get(dev, "pwm-tdiv");
-	if (IS_ERR(pwm->clk_div)) {
-		dev_err(dev, "failed to get pwm tdiv clk\n");
-		ret = PTR_ERR(pwm->clk_div);
-		goto err_clk_tin;
-	}
-
-	local_irq_save(flags);
-
-	tcon = __raw_readl(S3C2410_TCON);
-	tcon |= pwm_tcon_invert(pwm);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	local_irq_restore(flags);
-
-
-	ret = pwm_register(pwm);
-	if (ret) {
-		dev_err(dev, "failed to register pwm\n");
-		goto err_clk_tdiv;
-	}
-
-	pwm_dbg(pwm, "config bits %02x\n",
-		(__raw_readl(S3C2410_TCON) >> pwm->tcon_base) & 0x0f);
-
-	dev_info(dev, "tin at %lu, tdiv at %lu, tin=%sclk, base %d\n",
-		 clk_get_rate(pwm->clk),
-		 clk_get_rate(pwm->clk_div),
-		 pwm_is_tdiv(pwm) ? "div" : "ext", pwm->tcon_base);
-
-	platform_set_drvdata(pdev, pwm);
-	return 0;
-
- err_clk_tdiv:
-	clk_put(pwm->clk_div);
-
- err_clk_tin:
-	clk_put(pwm->clk);
-
- err_alloc:
-	kfree(pwm);
-	return ret;
-}
-
-static int s3c_pwm_remove(struct platform_device *pdev)
-{
-	struct pwm_device *pwm = platform_get_drvdata(pdev);
-
-	clk_put(pwm->clk_div);
-	clk_put(pwm->clk);
-	kfree(pwm);
-
-	return 0;
-}
-
-static struct platform_driver s3c_pwm_driver = {
-	.driver		= {
-		.name	= "s3c24xx-pwm",
-		.owner	= THIS_MODULE,
-	},
-	.probe		= s3c_pwm_probe,
-	.remove		= __devexit_p(s3c_pwm_remove),
-};
-
-static int __init pwm_init(void)
-{
-	int ret;
-
-	clk_scaler[0] = clk_get(NULL, "pwm-scaler0");
-	clk_scaler[1] = clk_get(NULL, "pwm-scaler1");
-
-	if (IS_ERR(clk_scaler[0]) || IS_ERR(clk_scaler[1])) {
-		printk(KERN_ERR "%s: failed to get scaler clocks\n", __func__);
-		return -EINVAL;
-	}
-
-	ret = platform_driver_register(&s3c_pwm_driver);
-	if (ret)
-		printk(KERN_ERR "%s: failed to add pwm driver\n", __func__);
-
-	return ret;
-}
-
-arch_initcall(pwm_init);
-- 
cgit v1.2.3


From 897bd6a363770ced6b78f6ae8882325c7590ed8b Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Fri, 31 Jul 2009 02:29:45 +0100
Subject: ARM: 5633/1: Add wdt resource for w90p910 platform

Add wdt resource for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/mach-w90p910evb.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c
index 3e3a267b2dd..117578aed68 100644
--- a/arch/arm/mach-w90x900/mach-w90p910evb.c
+++ b/arch/arm/mach-w90x900/mach-w90p910evb.c
@@ -340,6 +340,28 @@ static struct spi_board_info w90p910_spi_board_info[] __initdata = {
 	},
 };
 
+/* WDT Device */
+
+static struct resource w90p910_wdt_resource[] = {
+	[0] = {
+		.start = W90X900_PA_TIMER,
+		.end   = W90X900_PA_TIMER + W90X900_SZ_TIMER - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_WDT,
+		.end   = IRQ_WDT,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device w90p910_device_wdt = {
+	.name		= "w90p910-wdt",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(w90p910_wdt_resource),
+	.resource	= w90p910_wdt_resource,
+};
+
 static struct map_desc w90p910_iodesc[] __initdata = {
 };
 
@@ -357,6 +379,7 @@ static struct platform_device *w90p910evb_dev[] __initdata = {
 	&w90p910_device_fmi,
 	&w90p910_device_emc,
 	&w90p910_device_spi,
+	&w90p910_device_wdt,
 };
 
 static void __init w90p910evb_map_io(void)
-- 
cgit v1.2.3


From ae45b1c618d9e645a5e1decff31b710f739745fa Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Fri, 31 Jul 2009 02:30:32 +0100
Subject: ARM: 5634/1: Add static setting cpu frequence for w90p910 platform

Add static setting cpu frequence for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/Makefile                  |  2 +-
 arch/arm/mach-w90x900/clksel.c                  | 91 +++++++++++++++++++++++++
 arch/arm/mach-w90x900/cpu.h                     |  1 +
 arch/arm/mach-w90x900/include/mach/regs-clock.h | 22 ++++++
 arch/arm/mach-w90x900/include/mach/regs-ebi.h   | 33 +++++++++
 arch/arm/mach-w90x900/w90p910.c                 | 80 ++++++++++++++++++++++
 6 files changed, 228 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-w90x900/clksel.c
 create mode 100644 arch/arm/mach-w90x900/include/mach/regs-ebi.h

(limited to 'arch/arm')

diff --git a/arch/arm/mach-w90x900/Makefile b/arch/arm/mach-w90x900/Makefile
index d50c94f4dbd..3ccd625455c 100644
--- a/arch/arm/mach-w90x900/Makefile
+++ b/arch/arm/mach-w90x900/Makefile
@@ -5,7 +5,7 @@
 # Object file lists.
 
 obj-y				:= irq.o time.o mfp-w90p910.o gpio.o clock.o
-
+obj-y				+= clksel.o
 # W90X900 CPU support files
 
 obj-$(CONFIG_CPU_W90P910)	+= w90p910.o
diff --git a/arch/arm/mach-w90x900/clksel.c b/arch/arm/mach-w90x900/clksel.c
new file mode 100644
index 00000000000..5a77eb91cb1
--- /dev/null
+++ b/arch/arm/mach-w90x900/clksel.c
@@ -0,0 +1,91 @@
+/*
+ * linux/arch/arm/mach-w90x900/clksel.c
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-clock.h>
+
+#define PLL0		0x00
+#define PLL1		0x01
+#define OTHER		0x02
+#define EXT		0x03
+#define MSOFFSET	0x0C
+#define ATAOFFSET	0x0a
+#define LCDOFFSET	0x06
+#define AUDOFFSET	0x04
+#define CPUOFFSET	0x00
+
+static DEFINE_MUTEX(clksel_sem);
+
+static void clock_source_select(const char *dev_id, unsigned int clkval)
+{
+	unsigned int clksel, offset;
+
+	clksel = __raw_readl(REG_CLKSEL);
+
+	if (strcmp(dev_id, "w90p910-ms") == 0)
+		offset = MSOFFSET;
+	else if (strcmp(dev_id, "w90p910-atapi") == 0)
+		offset = ATAOFFSET;
+	else if (strcmp(dev_id, "w90p910-lcd") == 0)
+		offset = LCDOFFSET;
+	else if (strcmp(dev_id, "w90p910-audio") == 0)
+		offset = AUDOFFSET;
+	else
+		offset = CPUOFFSET;
+
+	clksel &= ~(0x03 << offset);
+	clksel |= (clkval << offset);
+
+	__raw_writel(clksel, REG_CLKSEL);
+}
+
+void w90p910_clock_source(struct device *dev, unsigned char *src)
+{
+	unsigned int clkval;
+	const char *dev_id;
+
+	BUG_ON(!src);
+	clkval = 0;
+
+	mutex_lock(&clksel_sem);
+
+	if (dev)
+		dev_id = dev_name(dev);
+	else
+		dev_id = "cpufreq";
+
+	if (strcmp(src, "pll0") == 0)
+		clkval = PLL0;
+	else if (strcmp(src, "pll1") == 0)
+		clkval = PLL1;
+	else if (strcmp(src, "ext") == 0)
+		clkval = EXT;
+	else if (strcmp(src, "oth") == 0)
+		clkval = OTHER;
+
+	clock_source_select(dev_id, clkval);
+
+	mutex_unlock(&clksel_sem);
+}
+EXPORT_SYMBOL(w90p910_clock_source);
+
diff --git a/arch/arm/mach-w90x900/cpu.h b/arch/arm/mach-w90x900/cpu.h
index 57b5dbabeb4..ddde959d898 100644
--- a/arch/arm/mach-w90x900/cpu.h
+++ b/arch/arm/mach-w90x900/cpu.h
@@ -45,6 +45,7 @@ extern void w90p910_init_clocks(void);
 extern void w90p910_map_io(struct map_desc *mach_desc, int size);
 extern struct platform_device w90p910_serial_device;
 extern struct sys_timer w90x900_timer;
+extern void w90p910_clock_source(struct device *dev, unsigned char *src);
 
 #define W90X900_8250PORT(name)					\
 {								\
diff --git a/arch/arm/mach-w90x900/include/mach/regs-clock.h b/arch/arm/mach-w90x900/include/mach/regs-clock.h
index f10b6a8dc06..516d6b477b6 100644
--- a/arch/arm/mach-w90x900/include/mach/regs-clock.h
+++ b/arch/arm/mach-w90x900/include/mach/regs-clock.h
@@ -28,4 +28,26 @@
 #define REG_CLKEN1	(CLK_BA + 0x24)
 #define REG_CLKDIV1	(CLK_BA + 0x28)
 
+/* Define PLL freq setting */
+#define PLL_DISABLE		0x12B63
+#define	PLL_66MHZ		0x2B63
+#define	PLL_100MHZ		0x4F64
+#define PLL_120MHZ		0x4F63
+#define	PLL_166MHZ		0x4124
+#define	PLL_200MHZ		0x4F24
+
+/* Define AHB:CPUFREQ ratio */
+#define	AHB_CPUCLK_1_1		0x00
+#define	AHB_CPUCLK_1_2		0x01
+#define	AHB_CPUCLK_1_4		0x02
+#define	AHB_CPUCLK_1_8		0x03
+
+/* Define APB:AHB ratio */
+#define APB_AHB_1_2		0x01
+#define APB_AHB_1_4		0x02
+#define APB_AHB_1_8		0x03
+
+/* Define clock skew */
+#define DEFAULTSKEW		0x48
+
 #endif /*  __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-w90x900/include/mach/regs-ebi.h b/arch/arm/mach-w90x900/include/mach/regs-ebi.h
new file mode 100644
index 00000000000..b68455e7f88
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/regs-ebi.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/regs-ebi.h
+ *
+ * Copyright (c) 2009 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_EBI_H
+#define __ASM_ARCH_REGS_EBI_H
+
+/* EBI Control Registers */
+
+#define EBI_BA		W90X900_VA_EBI
+#define REG_EBICON	(EBI_BA + 0x00)
+#define REG_ROMCON	(EBI_BA + 0x04)
+#define REG_SDCONF0	(EBI_BA + 0x08)
+#define REG_SDCONF1	(EBI_BA + 0x0C)
+#define REG_SDTIME0	(EBI_BA + 0x10)
+#define REG_SDTIME1	(EBI_BA + 0x14)
+#define REG_EXT0CON	(EBI_BA + 0x18)
+#define REG_EXT1CON	(EBI_BA + 0x1C)
+#define REG_EXT2CON	(EBI_BA + 0x20)
+#define REG_EXT3CON	(EBI_BA + 0x24)
+#define REG_EXT4CON	(EBI_BA + 0x28)
+#define REG_CKSKEW	(EBI_BA + 0x2C)
+
+#endif /*  __ASM_ARCH_REGS_EBI_H */
diff --git a/arch/arm/mach-w90x900/w90p910.c b/arch/arm/mach-w90x900/w90p910.c
index 6ebf5cfc78d..8444eababaa 100644
--- a/arch/arm/mach-w90x900/w90p910.c
+++ b/arch/arm/mach-w90x900/w90p910.c
@@ -24,6 +24,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/serial_8250.h>
+#include <linux/delay.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -32,6 +33,8 @@
 
 #include <mach/hardware.h>
 #include <mach/regs-serial.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-ebi.h>
 
 #include "cpu.h"
 #include "clock.h"
@@ -123,6 +126,83 @@ void __init w90p910_map_io(struct map_desc *mach_desc, int mach_size)
 		printk(KERN_ERR "CPU type 0x%08lx is not W90P910\n", idcode);
 }
 
+/*Set W90P910 cpu frequence*/
+static int __init w90p910_set_clkval(unsigned int cpufreq)
+{
+	unsigned int pllclk, ahbclk, apbclk, val;
+
+	pllclk = 0;
+	ahbclk = 0;
+	apbclk = 0;
+
+	switch (cpufreq) {
+	case 66:
+		pllclk = PLL_66MHZ;
+		ahbclk = AHB_CPUCLK_1_1;
+		apbclk = APB_AHB_1_2;
+		break;
+
+	case 100:
+		pllclk = PLL_100MHZ;
+		ahbclk = AHB_CPUCLK_1_1;
+		apbclk = APB_AHB_1_2;
+		break;
+
+	case 120:
+		pllclk = PLL_120MHZ;
+		ahbclk = AHB_CPUCLK_1_2;
+		apbclk = APB_AHB_1_2;
+		break;
+
+	case 166:
+		pllclk = PLL_166MHZ;
+		ahbclk = AHB_CPUCLK_1_2;
+		apbclk = APB_AHB_1_2;
+		break;
+
+	case 200:
+		pllclk = PLL_200MHZ;
+		ahbclk = AHB_CPUCLK_1_2;
+		apbclk = APB_AHB_1_2;
+		break;
+	}
+
+	__raw_writel(pllclk, REG_PLLCON0);
+
+	val = __raw_readl(REG_CLKDIV);
+	val &= ~(0x03 << 24 | 0x03 << 26);
+	val |= (ahbclk << 24 | apbclk << 26);
+	__raw_writel(val, REG_CLKDIV);
+
+	return 	0;
+}
+static int __init w90p910_set_cpufreq(char *str)
+{
+	unsigned long cpufreq, val;
+
+	if (!*str)
+		return 0;
+
+	strict_strtoul(str, 0, &cpufreq);
+
+	w90p910_clock_source(NULL, "ext");
+
+	w90p910_set_clkval(cpufreq);
+
+	mdelay(1);
+
+	val = __raw_readl(REG_CKSKEW);
+	val &= ~0xff;
+	val |= DEFAULTSKEW;
+	__raw_writel(val, REG_CKSKEW);
+
+	w90p910_clock_source(NULL, "pll0");
+
+	return 1;
+}
+
+__setup("cpufreq=", w90p910_set_cpufreq);
+
 /*Init W90P910 clock*/
 
 void __init w90p910_init_clocks(void)
-- 
cgit v1.2.3


From fb85205ada3fef98122a40b700ecb71efb33ae71 Mon Sep 17 00:00:00 2001
From: Sergey Matyukevich <geomatsi@gmail.com>
Date: Thu, 30 Jul 2009 22:23:24 +0100
Subject: ARM: 5631/1: Platform data for CF/IDE support in AT91SAM9260

This patch adds platform data for CF/IDE support
and SMC init code for AT91SAM9260 SoC.

Tested-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/at91sam9260_devices.c | 116 +++++++++++++++++++++++++++++++
 1 file changed, 116 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index d74c9ac007e..ee4ea0e720c 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -1113,6 +1113,122 @@ void __init at91_set_serial_console(unsigned portnr) {}
 void __init at91_add_device_serial(void) {}
 #endif
 
+/* --------------------------------------------------------------------
+ *  CF/IDE
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) || \
+	defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
+	defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
+
+static struct at91_cf_data cf0_data;
+
+static struct resource cf0_resources[] = {
+	[0] = {
+		.start	= AT91_CHIPSELECT_4,
+		.end	= AT91_CHIPSELECT_4 + SZ_256M - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device cf0_device = {
+	.id		= 0,
+	.dev		= {
+				.platform_data	= &cf0_data,
+	},
+	.resource	= cf0_resources,
+	.num_resources	= ARRAY_SIZE(cf0_resources),
+};
+
+static struct at91_cf_data cf1_data;
+
+static struct resource cf1_resources[] = {
+	[0] = {
+		.start	= AT91_CHIPSELECT_5,
+		.end	= AT91_CHIPSELECT_5 + SZ_256M - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device cf1_device = {
+	.id		= 1,
+	.dev		= {
+				.platform_data	= &cf1_data,
+	},
+	.resource	= cf1_resources,
+	.num_resources	= ARRAY_SIZE(cf1_resources),
+};
+
+void __init at91_add_device_cf(struct at91_cf_data *data)
+{
+	struct platform_device *pdev;
+	unsigned long csa;
+
+	if (!data)
+		return;
+
+	csa = at91_sys_read(AT91_MATRIX_EBICSA);
+
+	switch (data->chipselect) {
+	case 4:
+		at91_set_multi_drive(AT91_PIN_PC8, 0);
+		at91_set_A_periph(AT91_PIN_PC8, 0);
+		csa |= AT91_MATRIX_CS4A_SMC_CF1;
+		cf0_data = *data;
+		pdev = &cf0_device;
+		break;
+	case 5:
+		at91_set_multi_drive(AT91_PIN_PC9, 0);
+		at91_set_A_periph(AT91_PIN_PC9, 0);
+		csa |= AT91_MATRIX_CS5A_SMC_CF2;
+		cf1_data = *data;
+		pdev = &cf1_device;
+		break;
+	default:
+		printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n",
+		       data->chipselect);
+		return;
+	}
+
+	at91_sys_write(AT91_MATRIX_EBICSA, csa);
+
+	if (data->rst_pin) {
+		at91_set_multi_drive(data->rst_pin, 0);
+		at91_set_gpio_output(data->rst_pin, 1);
+	}
+
+	if (data->irq_pin) {
+		at91_set_gpio_input(data->irq_pin, 0);
+		at91_set_deglitch(data->irq_pin, 1);
+	}
+
+	if (data->det_pin) {
+		at91_set_gpio_input(data->det_pin, 0);
+		at91_set_deglitch(data->det_pin, 1);
+	}
+
+	at91_set_B_periph(AT91_PIN_PC6, 0);     /* CFCE1 */
+	at91_set_B_periph(AT91_PIN_PC7, 0);     /* CFCE2 */
+	at91_set_A_periph(AT91_PIN_PC10, 0);    /* CFRNW */
+	at91_set_A_periph(AT91_PIN_PC15, 1);    /* NWAIT */
+
+	if (data->flags & AT91_CF_TRUE_IDE)
+#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE)
+		pdev->name = "pata_at91";
+#elif defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
+		pdev->name = "at91_ide";
+#else
+#warning "board requires AT91_CF_TRUE_IDE: enable either at91_ide or pata_at91"
+#endif
+	else
+		pdev->name = "at91_cf";
+
+	platform_device_register(pdev);
+}
+
+#else
+void __init at91_add_device_cf(struct at91_cf_data * data) {}
+#endif
 
 /* -------------------------------------------------------------------- */
 /*
-- 
cgit v1.2.3


From 0c30df6fe0bd1e3845357e793dc1bfd908751c45 Mon Sep 17 00:00:00 2001
From: Sergey Matyukevich <geomatsi@gmail.com>
Date: Thu, 30 Jul 2009 22:29:07 +0100
Subject: ARM: 5632/1: Board-specific data for IDE support on afeb9260

This patch adds board-specific data for IDE support on afeb9260.

Depends on #5631/1

Tested-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Acked-by: Sergey Lapin <slapin@ossfans.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/board-afeb-9260v1.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index 970fd6b6753..61e52b66bc7 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -174,6 +174,16 @@ static struct i2c_board_info __initdata afeb9260_i2c_devices[] = {
 	},
 };
 
+/*
+ * IDE (CF True IDE mode)
+ */
+static struct at91_cf_data afeb9260_cf_data = {
+	.chipselect = 4,
+	.irq_pin    = AT91_PIN_PA6,
+	.rst_pin    = AT91_PIN_PA7,
+	.flags      = AT91_CF_TRUE_IDE,
+};
+
 static void __init afeb9260_board_init(void)
 {
 	/* Serial */
@@ -202,6 +212,8 @@ static void __init afeb9260_board_init(void)
 			ARRAY_SIZE(afeb9260_i2c_devices));
 	/* Audio */
 	at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
+	/* IDE */
+	at91_add_device_cf(&afeb9260_cf_data);
 }
 
 MACHINE_START(AFEB9260, "Custom afeb9260 board")
-- 
cgit v1.2.3


From a084fcfae541abc0eeecdd73ceeb01fb2453df4e Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sat, 1 Aug 2009 16:26:03 +0100
Subject: [ARM] Update mach-types

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/tools/mach-types | 38 +++++++++++++++++++++++++++++++++++++-
 1 file changed, 37 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 30af4329469..200d83a9828 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Thu Jul 9 20:56:13 2009
+# Last update: Sat Aug 1 16:26:02 2009
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -2313,3 +2313,39 @@ openrd_base		MACH_OPENRD_BASE	OPENRD_BASE		2325
 incredible		MACH_INCREDIBLE		INCREDIBLE		2326
 incrediblec		MACH_INCREDIBLEC	INCREDIBLEC		2327
 heroct			MACH_HEROCT		HEROCT			2328
+mmnet1000		MACH_MMNET1000		MMNET1000		2329
+devkit8000		MACH_DEVKIT8000		DEVKIT8000		2330
+devkit9000		MACH_DEVKIT9000		DEVKIT9000		2331
+mx31txtr		MACH_MX31TXTR		MX31TXTR		2332
+u380			MACH_U380		U380			2333
+oamp3_hualu		MACH_HUALU_BOARD	HUALU_BOARD		2334
+npcmx50			MACH_NPCMX50		NPCMX50			2335
+mx51_lange51		MACH_MX51_LANGE51	MX51_LANGE51		2336
+mx51_lange52		MACH_MX51_LANGE52	MX51_LANGE52		2337
+riom			MACH_RIOM		RIOM			2338
+comcas			MACH_COMCAS		COMCAS			2339
+wsi_mx27		MACH_WSI_MX27		WSI_MX27		2340
+cm_t35			MACH_CM_T35		CM_T35			2341
+net2big			MACH_NET2BIG		NET2BIG			2342
+motorola_a1600		MACH_MOTOROLA_A1600	MOTOROLA_A1600		2343
+igep0020		MACH_IGEP0020		IGEP0020		2344
+igep0010		MACH_IGEP0010		IGEP0010		2345
+mv6281gtwge2		MACH_MV6281GTWGE2	MV6281GTWGE2		2346
+scat100			MACH_SCAT100		SCAT100			2347
+sanmina			MACH_SANMINA		SANMINA			2348
+momento			MACH_MOMENTO		MOMENTO			2349
+nuc9xx			MACH_NUC9XX		NUC9XX			2350
+nuc910evb		MACH_NUC910EVB		NUC910EVB		2351
+nuc920evb		MACH_NUC920EVB		NUC920EVB		2352
+nuc950evb		MACH_NUC950EVB		NUC950EVB		2353
+nuc945evb		MACH_NUC945EVB		NUC945EVB		2354
+nuc960evb		MACH_NUC960EVB		NUC960EVB		2355
+nuc932evb		MACH_NUC932EVB		NUC932EVB		2356
+nuc900			MACH_NUC900		NUC900			2357
+sd1soc			MACH_SD1SOC		SD1SOC			2358
+ln2440bc		MACH_LN2440BC		LN2440BC		2359
+rsbc			MACH_RSBC		RSBC			2360
+openrd_client		MACH_OPENRD_CLIENT	OPENRD_CLIENT		2361
+hpipaq11x		MACH_HPIPAQ11X		HPIPAQ11X		2362
+wayland			MACH_WAYLAND		WAYLAND			2363
+acnbsx102		MACH_ACNBSX102		ACNBSX102		2364
-- 
cgit v1.2.3


From af1057abd7d5f97e17ab96e34d1920746188ddcb Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Mon, 3 Aug 2009 11:57:20 +0100
Subject: ARM: 5635/1: Use DIV_ROUND_CLOSEST

The kernel.h macro DIV_ROUND_CLOSEST performs the computation
(x + d/2)/d but is perhaps more readable.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@haskernel@
@@

@depends on haskernel@
expression x,__divisor;
@@

- (((x) + ((__divisor) / 2)) / (__divisor))
+ DIV_ROUND_CLOSEST(x,__divisor)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 40755298fa3..16b92c37ec9 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -82,7 +82,7 @@ void __init ep93xx_map_io(void)
  */
 static unsigned int last_jiffy_time;
 
-#define TIMER4_TICKS_PER_JIFFY		((CLOCK_TICK_RATE + (HZ/2)) / HZ)
+#define TIMER4_TICKS_PER_JIFFY		DIV_ROUND_CLOSEST(CLOCK_TICK_RATE, HZ)
 
 static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
 {
-- 
cgit v1.2.3


From 49c794e94649020248e37b78db16cd25bad38b4f Mon Sep 17 00:00:00 2001
From: Jan Engelhardt <jengelh@medozas.de>
Date: Tue, 4 Aug 2009 07:28:28 +0000
Subject: net: implement a SO_PROTOCOL getsockoption

Similar to SO_TYPE returning the socket type, SO_PROTOCOL allows to
retrieve the protocol used with a given socket.

I am not quite sure why we have that-many copies of socket.h, and why
the values are not the same on all arches either, but for where hex
numbers dominate, I use 0x1029 for SO_PROTOCOL as that seems to be
the next free unused number across a bunch of operating systems, or
so Google results make me want to believe. SO_PROTOCOL for others
just uses the next free Linux number, 38.

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/arm/include/asm/socket.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/socket.h b/arch/arm/include/asm/socket.h
index 537de4e0ef5..7f47454ffbf 100644
--- a/arch/arm/include/asm/socket.h
+++ b/arch/arm/include/asm/socket.h
@@ -57,4 +57,6 @@
 #define SO_TIMESTAMPING		37
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_PROTOCOL		38
+
 #endif /* _ASM_SOCKET_H */
-- 
cgit v1.2.3


From 0d6038ee76f2e06b79d0465807f67e86bf4025de Mon Sep 17 00:00:00 2001
From: Jan Engelhardt <jengelh@medozas.de>
Date: Tue, 4 Aug 2009 07:28:29 +0000
Subject: net: implement a SO_DOMAIN getsockoption
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This sockopt goes in line with SO_TYPE and SO_PROTOCOL. It makes it
possible for userspace programs to pass around file descriptors — I
am referring to arguments-to-functions, but it may even work for the
fd passing over UNIX sockets — without needing to also pass the
auxiliary information (PF_INET6/IPPROTO_TCP).

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/arm/include/asm/socket.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/socket.h b/arch/arm/include/asm/socket.h
index 7f47454ffbf..92ac61d294f 100644
--- a/arch/arm/include/asm/socket.h
+++ b/arch/arm/include/asm/socket.h
@@ -58,5 +58,6 @@
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
 #define SO_PROTOCOL		38
+#define SO_DOMAIN		39
 
 #endif /* _ASM_SOCKET_H */
-- 
cgit v1.2.3


From c12abc012e18b362204345c323536f228d65c4db Mon Sep 17 00:00:00 2001
From: Jarkko Nikula <jhnikula@gmail.com>
Date: Fri, 7 Aug 2009 09:59:47 +0300
Subject: ARM: OMAP: McBSP: Fix ASoC on OMAP1510 by fixing API of
 omap_mcbsp_start/stop

Simultaneous audio playback and capture on OMAP1510 can cause that second
stream is stalled if there is enough delay between startup of the audio
streams.

Current implementation of the omap_mcbsp_start is starting both transmitter
and receiver at the same time and it is called only for firstly started
audio stream from the OMAP McBSP based ASoC DAI driver.

Since DMA request lines on OMAP1510 are edge sensitive, the DMA request is
missed if there is no DMA transfer set up at that time when the first word
after McBSP startup is transmitted. The problem hasn't noted before since
later OMAPs are using level sensitive DMA request lines.

Fix the problem by changing API of omap_mcbsp_start and omap_mcbsp_stop by
allowing to start and stop individually McBSP transmitter and receiver
logics. Then call those functions individually for both audio playback
and capture streams. This ensures that DMA transfer is setup before
transmitter or receiver is started.

Thanks to Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> for detailed problem
analysis and Peter Ujfalusi <peter.ujfalusi@nokia.com> for info about DMA
request line behavior differences between the OMAP generations.

Reported-and-tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/plat-omap/include/mach/mcbsp.h |  4 +--
 arch/arm/plat-omap/mcbsp.c              | 50 +++++++++++++++++++++------------
 2 files changed, 34 insertions(+), 20 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index bb154ea7676..57249bb1e9b 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -387,8 +387,8 @@ void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
 void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config);
 int omap_mcbsp_request(unsigned int id);
 void omap_mcbsp_free(unsigned int id);
-void omap_mcbsp_start(unsigned int id);
-void omap_mcbsp_stop(unsigned int id);
+void omap_mcbsp_start(unsigned int id, int tx, int rx);
+void omap_mcbsp_stop(unsigned int id, int tx, int rx);
 void omap_mcbsp_xmit_word(unsigned int id, u32 word);
 u32 omap_mcbsp_recv_word(unsigned int id);
 
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index efa0e0111f3..a3d2313460b 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -328,14 +328,15 @@ void omap_mcbsp_free(unsigned int id)
 EXPORT_SYMBOL(omap_mcbsp_free);
 
 /*
- * Here we start the McBSP, by enabling the sample
- * generator, both transmitter and receivers,
- * and the frame sync.
+ * Here we start the McBSP, by enabling transmitter, receiver or both.
+ * If no transmitter or receiver is active prior calling, then sample-rate
+ * generator and frame sync are started.
  */
-void omap_mcbsp_start(unsigned int id)
+void omap_mcbsp_start(unsigned int id, int tx, int rx)
 {
 	struct omap_mcbsp *mcbsp;
 	void __iomem *io_base;
+	int idle;
 	u16 w;
 
 	if (!omap_mcbsp_check_valid_id(id)) {
@@ -348,32 +349,40 @@ void omap_mcbsp_start(unsigned int id)
 	mcbsp->rx_word_length = (OMAP_MCBSP_READ(io_base, RCR1) >> 5) & 0x7;
 	mcbsp->tx_word_length = (OMAP_MCBSP_READ(io_base, XCR1) >> 5) & 0x7;
 
-	/* Start the sample generator */
-	w = OMAP_MCBSP_READ(io_base, SPCR2);
-	OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 6));
+	idle = !((OMAP_MCBSP_READ(io_base, SPCR2) |
+		  OMAP_MCBSP_READ(io_base, SPCR1)) & 1);
+
+	if (idle) {
+		/* Start the sample generator */
+		w = OMAP_MCBSP_READ(io_base, SPCR2);
+		OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 6));
+	}
 
 	/* Enable transmitter and receiver */
 	w = OMAP_MCBSP_READ(io_base, SPCR2);
-	OMAP_MCBSP_WRITE(io_base, SPCR2, w | 1);
+	OMAP_MCBSP_WRITE(io_base, SPCR2, w | (tx & 1));
 
 	w = OMAP_MCBSP_READ(io_base, SPCR1);
-	OMAP_MCBSP_WRITE(io_base, SPCR1, w | 1);
+	OMAP_MCBSP_WRITE(io_base, SPCR1, w | (rx & 1));
 
 	udelay(100);
 
-	/* Start frame sync */
-	w = OMAP_MCBSP_READ(io_base, SPCR2);
-	OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 7));
+	if (idle) {
+		/* Start frame sync */
+		w = OMAP_MCBSP_READ(io_base, SPCR2);
+		OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 7));
+	}
 
 	/* Dump McBSP Regs */
 	omap_mcbsp_dump_reg(id);
 }
 EXPORT_SYMBOL(omap_mcbsp_start);
 
-void omap_mcbsp_stop(unsigned int id)
+void omap_mcbsp_stop(unsigned int id, int tx, int rx)
 {
 	struct omap_mcbsp *mcbsp;
 	void __iomem *io_base;
+	int idle;
 	u16 w;
 
 	if (!omap_mcbsp_check_valid_id(id)) {
@@ -386,15 +395,20 @@ void omap_mcbsp_stop(unsigned int id)
 
 	/* Reset transmitter */
 	w = OMAP_MCBSP_READ(io_base, SPCR2);
-	OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1));
+	OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(tx & 1));
 
 	/* Reset receiver */
 	w = OMAP_MCBSP_READ(io_base, SPCR1);
-	OMAP_MCBSP_WRITE(io_base, SPCR1, w & ~(1));
+	OMAP_MCBSP_WRITE(io_base, SPCR1, w & ~(rx & 1));
 
-	/* Reset the sample rate generator */
-	w = OMAP_MCBSP_READ(io_base, SPCR2);
-	OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1 << 6));
+	idle = !((OMAP_MCBSP_READ(io_base, SPCR2) |
+		  OMAP_MCBSP_READ(io_base, SPCR1)) & 1);
+
+	if (idle) {
+		/* Reset the sample rate generator */
+		w = OMAP_MCBSP_READ(io_base, SPCR2);
+		OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1 << 6));
+	}
 }
 EXPORT_SYMBOL(omap_mcbsp_stop);
 
-- 
cgit v1.2.3


From 8db5d1a64d36d0750b88c6c13feeaf0e00be2eb4 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 25 May 2009 12:21:38 +0200
Subject: MXC: pass base/irq to mxc_timer_init

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx1/clock.c               |  2 +-
 arch/arm/mach-mx2/clock_imx21.c         |  2 +-
 arch/arm/mach-mx2/clock_imx27.c         |  2 +-
 arch/arm/mach-mx3/clock-imx35.c         |  2 +-
 arch/arm/mach-mx3/clock.c               |  3 ++-
 arch/arm/plat-mxc/include/mach/common.h |  2 +-
 arch/arm/plat-mxc/time.c                | 21 ++-------------------
 7 files changed, 9 insertions(+), 25 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx1/clock.c b/arch/arm/mach-mx1/clock.c
index 0d0f306851d..7b739dd8700 100644
--- a/arch/arm/mach-mx1/clock.c
+++ b/arch/arm/mach-mx1/clock.c
@@ -626,7 +626,7 @@ int __init mx1_clocks_init(unsigned long fref)
 	clk_enable(&hclk);
 	clk_enable(&fclk);
 
-	mxc_timer_init(&gpt_clk);
+	mxc_timer_init(&gpt_clk, IO_ADDRESS(TIM1_BASE_ADDR), TIM1_INT);
 
 	return 0;
 }
diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c
index 0850fb88ec1..eede79855f4 100644
--- a/arch/arm/mach-mx2/clock_imx21.c
+++ b/arch/arm/mach-mx2/clock_imx21.c
@@ -1004,6 +1004,6 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href)
 	clk_enable(&uart_clk[0]);
 #endif
 
-	mxc_timer_init(&gpt_clk[0]);
+	mxc_timer_init(&gpt_clk[0], IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1);
 	return 0;
 }
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index 2c971442f3f..a0c577f80d4 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -748,7 +748,7 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_enable(&uart1_clk);
 #endif
 
-	mxc_timer_init(&gpt1_clk);
+	mxc_timer_init(&gpt1_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1);
 
 	return 0;
 }
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index 577ee83d1f6..4cf1849f552 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -456,7 +456,7 @@ int __init mx35_clocks_init()
 	__raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2);
 	__raw_writel(0, CCM_BASE + CCM_CGR3);
 
-	mxc_timer_init(&gpt_clk);
+	mxc_timer_init(&ipg_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
 
 	return 0;
 }
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 8b14239724c..25b6f55bfb0 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -29,6 +29,7 @@
 
 #include <mach/clock.h>
 #include <mach/hardware.h>
+#include <mach/mx31.h>
 #include <mach/common.h>
 
 #include "crm_regs.h"
@@ -609,7 +610,7 @@ int __init mx31_clocks_init(unsigned long fref)
 		__raw_writel(reg, MXC_CCM_PMCR1);
 	}
 
-	mxc_timer_init(&ipg_clk);
+	mxc_timer_init(&ipg_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
 
 	return 0;
 }
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 02c3cd004db..1c48aefe4b6 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -20,7 +20,7 @@ extern void mx27_map_io(void);
 extern void mx31_map_io(void);
 extern void mx35_map_io(void);
 extern void mxc_init_irq(void);
-extern void mxc_timer_init(struct clk *timer_clk);
+extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
 extern int mx1_clocks_init(unsigned long fref);
 extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
 extern int mx27_clocks_init(unsigned long fref);
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 88fb3a57e02..7e71bb6270e 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -281,30 +281,13 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
 	return 0;
 }
 
-void __init mxc_timer_init(struct clk *timer_clk)
+void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
 {
 	uint32_t tctl_val;
-	int irq;
 
 	clk_enable(timer_clk);
 
-	if (cpu_is_mx1()) {
-#ifdef CONFIG_ARCH_MX1
-		timer_base = IO_ADDRESS(TIM1_BASE_ADDR);
-		irq = TIM1_INT;
-#endif
-	} else if (cpu_is_mx2()) {
-#ifdef CONFIG_ARCH_MX2
-		timer_base = IO_ADDRESS(GPT1_BASE_ADDR);
-		irq = MXC_INT_GPT1;
-#endif
-	} else if (cpu_is_mx3()) {
-#ifdef CONFIG_ARCH_MX3
-		timer_base = IO_ADDRESS(GPT1_BASE_ADDR);
-		irq = MXC_INT_GPT;
-#endif
-	} else
-		BUG();
+	timer_base = base;
 
 	/*
 	 * Initialise to a known state (all timers off, and timing reset)
-- 
cgit v1.2.3


From be124c94279edf4306798100f120c386947d8724 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 4 Jun 2009 12:19:02 +0200
Subject: system.c: runtime base address

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx1/generic.c             |  1 +
 arch/arm/mach-mx2/generic.c             |  2 ++
 arch/arm/mach-mx3/mm.c                  |  2 ++
 arch/arm/plat-mxc/include/mach/common.h |  1 +
 arch/arm/plat-mxc/system.c              | 22 +++++++++++++---------
 5 files changed, 19 insertions(+), 9 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx1/generic.c b/arch/arm/mach-mx1/generic.c
index 7622c9b38c9..bbb6c7b8766 100644
--- a/arch/arm/mach-mx1/generic.c
+++ b/arch/arm/mach-mx1/generic.c
@@ -41,6 +41,7 @@ static struct map_desc imx_io_desc[] __initdata = {
 void __init mx1_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX1);
+	mxc_arch_reset_init(IO_ADDRESS(WDT_BASE_ADDR));
 
 	iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
 }
diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c
index 169372f69d8..bdc5a6e67be 100644
--- a/arch/arm/mach-mx2/generic.c
+++ b/arch/arm/mach-mx2/generic.c
@@ -72,6 +72,7 @@ static struct map_desc mxc_io_desc[] __initdata = {
 void __init mx21_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX21);
+	mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
 
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
@@ -79,6 +80,7 @@ void __init mx21_map_io(void)
 void __init mx27_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX27);
+	mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
 
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index 1f5fdd456cb..f0d5ae533b4 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -75,6 +75,7 @@ static struct map_desc mxc_io_desc[] __initdata = {
 void __init mx31_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX31);
+	mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
 
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
@@ -82,6 +83,7 @@ void __init mx31_map_io(void)
 void __init mx35_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX35);
+	mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
 
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 1c48aefe4b6..1dc31d6dd43 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -29,5 +29,6 @@ extern int mx35_clocks_init(void);
 extern int mxc_register_gpios(void);
 extern int mxc_register_device(struct platform_device *pdev, void *data);
 extern void mxc_set_cpu_type(unsigned int type);
+extern void mxc_arch_reset_init(void __iomem *);
 
 #endif
diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c
index 79c37577c91..15e30532f4a 100644
--- a/arch/arm/plat-mxc/system.c
+++ b/arch/arm/plat-mxc/system.c
@@ -30,29 +30,28 @@
 #include <asm/proc-fns.h>
 #include <asm/system.h>
 
-#ifdef CONFIG_ARCH_MX1
-#define WDOG_WCR_REG		IO_ADDRESS(WDT_BASE_ADDR)
-#define WDOG_WCR_ENABLE		(1 << 0)
-#else
-#define WDOG_WCR_REG		IO_ADDRESS(WDOG_BASE_ADDR)
-#define WDOG_WCR_ENABLE		(1 << 2)
-#endif
+static void __iomem *wdog_base;
 
 /*
  * Reset the system. It is called by machine_restart().
  */
 void arch_reset(char mode, const char *cmd)
 {
-	if (!cpu_is_mx1()) {
+	unsigned int wcr_enable;
+
+	if (cpu_is_mx1()) {
+		wcr_enable = (1 << 0);
+	} else {
 		struct clk *clk;
 
 		clk = clk_get_sys("imx-wdt.0", NULL);
 		if (!IS_ERR(clk))
 			clk_enable(clk);
+		wcr_enable = (1 << 2);
 	}
 
 	/* Assert SRS signal */
-	__raw_writew(WDOG_WCR_ENABLE, WDOG_WCR_REG);
+	__raw_writew(wcr_enable, wdog_base);
 
 	/* wait for reset to assert... */
 	mdelay(500);
@@ -65,3 +64,8 @@ void arch_reset(char mode, const char *cmd)
 	/* we'll take a jump through zero as a poor second */
 	cpu_reset(0);
 }
+
+void mxc_arch_reset_init(void __iomem *base)
+{
+	wdog_base = base;
+}
-- 
cgit v1.2.3


From abae61305684fffb0f1d779a1a678855ec5e8cfc Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 25 May 2009 17:22:18 +0200
Subject: mxc: remove ARCH_NR_GPIOS

Use the default value of 256 which is enough for all i.MX SoCs.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/mx27.h | 3 ---
 arch/arm/plat-mxc/include/mach/mx3x.h | 3 ---
 2 files changed, 6 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index 6e93f2c0b7b..063ac352465 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -120,7 +120,4 @@ extern int mx27_revision(void);
 
 /* Mandatory defines used globally */
 
-/* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */
-#define ARCH_NR_GPIOS		(192 + 16)
-
 #endif /* __ASM_ARCH_MXC_MX27_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index b559a4bb576..44ca1b700f0 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -279,9 +279,6 @@
 
 /* Mandatory defines used globally */
 
-/* this CPU supports up to 96 GPIOs */
-#define ARCH_NR_GPIOS		96
-
 #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
 
 extern unsigned int system_rev;
-- 
cgit v1.2.3


From d30c74a02f7652e784c32a10736a3c88db98820c Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 4 Jun 2009 13:29:57 +0200
Subject: MXC uncompress macros: determine uart base by machine type

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/uncompress.h | 60 ++++++++++++++++++++---------
 1 file changed, 42 insertions(+), 18 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index de6fe036598..98c8a60214d 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -26,8 +26,11 @@
 #define __MXC_BOOT_UNCOMPRESS
 
 #include <mach/hardware.h>
+#include <asm/mach-types.h>
 
-#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
+static unsigned long uart_base;
+
+#define UART(x) (*(volatile unsigned long *)(uart_base + (x)))
 
 #define USR2 0x98
 #define USR2_TXFE (1<<14)
@@ -46,19 +49,10 @@
 
 static void putc(int ch)
 {
-	static unsigned long serial_port = 0;
-
-	if (unlikely(serial_port == 0)) {
-		do {
-			serial_port = UART1_BASE_ADDR;
-			if (UART(UCR1) & UCR1_UARTEN)
-				break;
-			serial_port = UART2_BASE_ADDR;
-			if (UART(UCR1) & UCR1_UARTEN)
-				break;
-			return;
-		} while (0);
-	}
+	if (!uart_base)
+		return;
+	if (!(UART(UCR1) & UCR1_UARTEN))
+		return;
 
 	while (!(UART(USR2) & USR2_TXFE))
 		barrier();
@@ -68,11 +62,41 @@ static void putc(int ch)
 
 #define flush() do { } while (0)
 
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
+#define MX1_UART1_BASE_ADDR	0x00206000
+#define MX2X_UART1_BASE_ADDR	0x1000a000
+#define MX3X_UART1_BASE_ADDR	0x43F90000
+
+static __inline__ void __arch_decomp_setup(unsigned long arch_id)
+{
+	switch (arch_id) {
+	case MACH_TYPE_MX1ADS:
+	case MACH_TYPE_SCB9328:
+		uart_base = MX1_UART1_BASE_ADDR;
+		break;
+	case MACH_TYPE_IMX27LITE:
+	case MACH_TYPE_MX27_3DS:
+	case MACH_TYPE_MX27ADS:
+	case MACH_TYPE_PCM038:
+	case MACH_TYPE_MX21ADS:
+		uart_base = MX2X_UART1_BASE_ADDR;
+		break;
+	case MACH_TYPE_MX31LITE:
+	case MACH_TYPE_ARMADILLO5X0:
+	case MACH_TYPE_MX31MOBOARD:
+	case MACH_TYPE_QONG:
+	case MACH_TYPE_MX31_3DS:
+	case MACH_TYPE_PCM037:
+	case MACH_TYPE_MX31ADS:
+	case MACH_TYPE_MX35_3DS:
+	case MACH_TYPE_PCM043:
+		uart_base = MX3X_UART1_BASE_ADDR;
+		break;
+	default:
+		break;
+	}
+}
 
+#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
 #define arch_decomp_wdog()
 
 #endif				/* __ASM_ARCH_MXC_UNCOMPRESS_H__ */
-- 
cgit v1.2.3


From ccc1a6f8eebf0eb8a5bee16293d1dc9b5eab1be3 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 4 Jun 2009 13:45:37 +0200
Subject: MXC: remove board specific setup of MXC_LL_UART_[PV]ADDR

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../arm/plat-mxc/include/mach/board-armadillo5x0.h |  7 ---
 arch/arm/plat-mxc/include/mach/board-mx21ads.h     |  6 ---
 arch/arm/plat-mxc/include/mach/board-mx27ads.h     |  6 ---
 arch/arm/plat-mxc/include/mach/board-mx27lite.h    |  5 --
 arch/arm/plat-mxc/include/mach/board-mx27pdk.h     |  5 --
 arch/arm/plat-mxc/include/mach/board-mx31ads.h     |  5 --
 arch/arm/plat-mxc/include/mach/board-mx31lilly.h   |  5 --
 arch/arm/plat-mxc/include/mach/board-mx31lite.h    |  3 --
 arch/arm/plat-mxc/include/mach/board-mx31moboard.h |  5 --
 arch/arm/plat-mxc/include/mach/board-mx31pdk.h     |  5 --
 arch/arm/plat-mxc/include/mach/board-mx35pdk.h     |  5 --
 arch/arm/plat-mxc/include/mach/board-pcm037.h      |  5 --
 arch/arm/plat-mxc/include/mach/board-pcm038.h      |  5 --
 arch/arm/plat-mxc/include/mach/board-pcm043.h      |  5 --
 arch/arm/plat-mxc/include/mach/board-qong.h        |  5 --
 arch/arm/plat-mxc/include/mach/debug-macro.S       | 59 ++++++++--------------
 arch/arm/plat-mxc/include/mach/mx1.h               |  4 --
 17 files changed, 21 insertions(+), 119 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
index 8769e910e55..0376c133c9f 100644
--- a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
+++ b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
@@ -12,11 +12,4 @@
 #ifndef __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__
 #define __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__
 
-#include <mach/hardware.h>
-
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/board-mx21ads.h b/arch/arm/plat-mxc/include/mach/board-mx21ads.h
index 06701df74c4..0cf4fa29510 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx21ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx21ads.h
@@ -14,12 +14,6 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX21ADS_H__
 #define __ASM_ARCH_MXC_BOARD_MX21ADS_H__
 
-/*
- * MXC UART EVB board level configurations
- */
-#define MXC_LL_UART_PADDR       UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR       AIPI_IO_ADDRESS(UART1_BASE_ADDR)
-
 /*
  * Memory-mapped I/O on MX21ADS base board
  */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
index d42f4e6116f..7776d230327 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx27ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
@@ -25,12 +25,6 @@
 #define MXC_MAX_BOARD_INTS      (MXC_MAX_EXP_IO_LINES + \
 				MXC_MAX_VIRTUAL_INTS)
 
-/*
- * MXC UART EVB board level configurations
- */
-#define MXC_LL_UART_PADDR       UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR       AIPI_IO_ADDRESS(UART1_BASE_ADDR)
-
 /*
  * @name Memory Size parameters
  */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27lite.h b/arch/arm/plat-mxc/include/mach/board-mx27lite.h
index a870f8ea244..ea87551d273 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx27lite.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx27lite.h
@@ -11,9 +11,4 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX27LITE_H__
 #define __ASM_ARCH_MXC_BOARD_MX27LITE_H__
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif /* __ASM_ARCH_MXC_BOARD_MX27LITE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
index 552b55d714d..fec1bcfa916 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
@@ -11,9 +11,4 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX27PDK_H__
 #define __ASM_ARCH_MXC_BOARD_MX27PDK_H__
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif /* __ASM_ARCH_MXC_BOARD_MX27PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
index 06e6895f7f6..2cbfa35e82f 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
@@ -114,9 +114,4 @@
 
 #define MXC_MAX_EXP_IO_LINES	16
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
index 78cf31e22e4..eb5a5024622 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
@@ -22,11 +22,6 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
 #define __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
 
-/* mandatory for CONFIG_LL_DEBUG */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	(AIPI_BASE_ADDR_VIRT + 0x0A000)
-
 #ifndef __ASSEMBLY__
 
 enum mx31lilly_boards {
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
index 52fbdf2d6f2..8e64325d690 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
@@ -11,8 +11,5 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__
 #define __ASM_ARCH_MXC_BOARD_MX31LITE_H__
 
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */
 
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
index 303fd2434a2..d5be6b5a6ac 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
@@ -19,11 +19,6 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
 #define __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	(AIPI_BASE_ADDR_VIRT + 0x0A000)
-
 #ifndef __ASSEMBLY__
 
 enum mx31moboard_boards {
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h b/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
index 519bab3eb28..2bbd6ed17f5 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
@@ -11,11 +11,6 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX31PDK_H__
 #define __ASM_ARCH_MXC_BOARD_MX31PDK_H__
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 /* Definitions for components on the Debug board */
 
 /* Base address of CPLD controller on the Debug board */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx35pdk.h b/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
index 1111037d6d9..383f1c04df0 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
@@ -19,9 +19,4 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX35PDK_H__
 #define __ASM_ARCH_MXC_BOARD_MX35PDK_H__
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif /* __ASM_ARCH_MXC_BOARD_MX35PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm037.h b/arch/arm/plat-mxc/include/mach/board-pcm037.h
index f0a1fa1938a..13411709b13 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm037.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm037.h
@@ -19,9 +19,4 @@
 #ifndef __ASM_ARCH_MXC_BOARD_PCM037_H__
 #define __ASM_ARCH_MXC_BOARD_PCM037_H__
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif /* __ASM_ARCH_MXC_BOARD_PCM037_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm038.h b/arch/arm/plat-mxc/include/mach/board-pcm038.h
index 4fcd7499e09..410f9786ed2 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm038.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm038.h
@@ -19,11 +19,6 @@
 #ifndef __ASM_ARCH_MXC_BOARD_PCM038_H__
 #define __ASM_ARCH_MXC_BOARD_PCM038_H__
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	(AIPI_BASE_ADDR_VIRT + 0x0A000)
-
 #ifndef __ASSEMBLY__
 /*
  * This CPU module needs a baseboard to work. After basic initializing
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm043.h b/arch/arm/plat-mxc/include/mach/board-pcm043.h
index 15fbdf16abc..1ac4e1682e5 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm043.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm043.h
@@ -19,9 +19,4 @@
 #ifndef __ASM_ARCH_MXC_BOARD_PCM043_H__
 #define __ASM_ARCH_MXC_BOARD_PCM043_H__
 
-/* mandatory for CONFIG_LL_DEBUG */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif /* __ASM_ARCH_MXC_BOARD_PCM043_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-qong.h b/arch/arm/plat-mxc/include/mach/board-qong.h
index 04033ec637d..6d88c7af4b2 100644
--- a/arch/arm/plat-mxc/include/mach/board-qong.h
+++ b/arch/arm/plat-mxc/include/mach/board-qong.h
@@ -11,11 +11,6 @@
 #ifndef __ASM_ARCH_MXC_BOARD_QONG_H__
 #define __ASM_ARCH_MXC_BOARD_QONG_H__
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 /* NOR FLASH */
 #define QONG_NOR_SIZE		(128*1024*1024)
 
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index bbc5f6753cf..4f85acd74af 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -11,52 +11,35 @@
  *
  */
 
-#include <mach/hardware.h>
-
-#ifdef CONFIG_MACH_MX31ADS
-#include <mach/board-mx31ads.h>
-#endif
-#ifdef CONFIG_MACH_PCM037
-#include <mach/board-pcm037.h>
-#endif
-#ifdef CONFIG_MACH_MX31LITE
-#include <mach/board-mx31lite.h>
-#endif
-#ifdef CONFIG_MACH_MX27ADS
-#include <mach/board-mx27ads.h>
-#endif
-#ifdef CONFIG_MACH_MX21ADS
-#include <mach/board-mx21ads.h>
-#endif
-#ifdef CONFIG_MACH_PCM038
-#include <mach/board-pcm038.h>
+#ifdef CONFIG_ARCH_MX1
+#include <mach/mx1.h>
+#define UART_PADDR	UART1_BASE_ADDR
+#define UART_VADDR	IO_ADDRESS(UART1_BASE_ADDR)
 #endif
-#ifdef CONFIG_MACH_MX31_3DS
-#include <mach/board-mx31pdk.h>
-#endif
-#ifdef CONFIG_MACH_QONG
-#include <mach/board-qong.h>
-#endif
-#ifdef CONFIG_MACH_PCM043
-#include <mach/board-pcm043.h>
-#endif
-#ifdef CONFIG_MACH_MX27_3DS
-#include <mach/board-mx27pdk.h>
+
+#ifdef CONFIG_ARCH_MX2
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
 #endif
-#ifdef CONFIG_MACH_ARMADILLO5X0
-#include <mach/board-armadillo5x0.h>
+#include <mach/mx2x.h>
+#define UART_PADDR	UART1_BASE_ADDR
+#define UART_VADDR	AIPI_IO_ADDRESS(UART1_BASE_ADDR)
 #endif
-#ifdef CONFIG_MACH_MX35_3DS
-#include <mach/board-mx35pdk.h>
+
+#ifdef CONFIG_ARCH_MX3
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
 #endif
-#ifdef CONFIG_MACH_MX27LITE
-#include <mach/board-mx27lite.h>
+#include <mach/mx3x.h>
+#define UART_PADDR	UART1_BASE_ADDR
+#define UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
 #endif
+
 		.macro	addruart,rx
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
-		ldreq	\rx, =MXC_LL_UART_PADDR	@ physical
-		ldrne	\rx, =MXC_LL_UART_VADDR	@ virtual
+		ldreq	\rx, =UART_PADDR	@ physical
+		ldrne	\rx, =UART_VADDR	@ virtual
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index 1000bf330bc..786836965cf 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -179,8 +179,4 @@
 #define DMA_REQ_UART1_T		30
 #define DMA_REQ_UART1_R		31
 
-/* mandatory for CONFIG_DEBUG_LL */
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif /*  __ASM_ARCH_MXC_MX1_H__ */
-- 
cgit v1.2.3


From 12308dfe3776ff5741fc675f2a352165e1628098 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Wed, 27 May 2009 18:33:58 +0200
Subject: mxc: remove do not include directly

Everyone should be free to include the files he actually needs.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/mx1.h  | 4 ----
 arch/arm/plat-mxc/include/mach/mx21.h | 5 -----
 arch/arm/plat-mxc/include/mach/mx27.h | 4 ----
 arch/arm/plat-mxc/include/mach/mx2x.h | 4 ----
 arch/arm/plat-mxc/include/mach/mx3x.h | 4 ----
 5 files changed, 21 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index 786836965cf..ee60d64728c 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -12,10 +12,6 @@
 #ifndef __ASM_ARCH_MXC_MX1_H__
 #define __ASM_ARCH_MXC_MX1_H__
 
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
 #include <mach/vmalloc.h>
 
 /*
diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h
index 8b070a041a9..21112c695ec 100644
--- a/arch/arm/plat-mxc/include/mach/mx21.h
+++ b/arch/arm/plat-mxc/include/mach/mx21.h
@@ -25,11 +25,6 @@
 #ifndef __ASM_ARCH_MXC_MX21_H__
 #define __ASM_ARCH_MXC_MX21_H__
 
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
-
 /* Memory regions and CS */
 #define SDRAM_BASE_ADDR         0xC0000000
 #define CSD1_BASE_ADDR          0xC4000000
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index 063ac352465..dc3ad9aa952 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -24,10 +24,6 @@
 #ifndef __ASM_ARCH_MXC_MX27_H__
 #define __ASM_ARCH_MXC_MX27_H__
 
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
 /* IRAM */
 #define IRAM_BASE_ADDR          0xFFFF4C00	/* internal ram */
 
diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/plat-mxc/include/mach/mx2x.h
index fc40d3ab8c5..5982ae5a00d 100644
--- a/arch/arm/plat-mxc/include/mach/mx2x.h
+++ b/arch/arm/plat-mxc/include/mach/mx2x.h
@@ -23,10 +23,6 @@
 #ifndef __ASM_ARCH_MXC_MX2x_H__
 #define __ASM_ARCH_MXC_MX2x_H__
 
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
 /* The following addresses are common between i.MX21 and i.MX27 */
 
 /* Register offests */
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index 44ca1b700f0..16f68e8f4cf 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -11,10 +11,6 @@
 #ifndef __ASM_ARCH_MXC_MX31_H__
 #define __ASM_ARCH_MXC_MX31_H__
 
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
 /*
  * MX31 memory map:
  *
-- 
cgit v1.2.3


From c5aa0ad0c557c63dcaf8c8d75a3dd4c5e90724b3 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 25 May 2009 17:36:19 +0200
Subject: mxc: turn to soc specific init_irq functions

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx1/generic.c             |  6 ++++++
 arch/arm/mach-mx1/mx1ads.c              |  4 ++--
 arch/arm/mach-mx1/scb9328.c             |  2 +-
 arch/arm/mach-mx2/generic.c             | 10 ++++++++++
 arch/arm/mach-mx2/mx21ads.c             |  2 +-
 arch/arm/mach-mx2/mx27ads.c             |  2 +-
 arch/arm/mach-mx2/mx27lite.c            |  2 +-
 arch/arm/mach-mx2/mx27pdk.c             |  2 +-
 arch/arm/mach-mx2/pcm038.c              |  2 +-
 arch/arm/mach-mx3/armadillo5x0.c        |  2 +-
 arch/arm/mach-mx3/mm.c                  | 10 ++++++++++
 arch/arm/mach-mx3/mx31ads.c             |  2 +-
 arch/arm/mach-mx3/mx31lilly.c           |  2 +-
 arch/arm/mach-mx3/mx31lite.c            |  2 +-
 arch/arm/mach-mx3/mx31moboard.c         |  3 ++-
 arch/arm/mach-mx3/mx31pdk.c             |  2 +-
 arch/arm/mach-mx3/mx35pdk.c             |  2 +-
 arch/arm/mach-mx3/pcm037.c              |  2 +-
 arch/arm/mach-mx3/pcm043.c              |  2 +-
 arch/arm/mach-mx3/qong.c                |  2 +-
 arch/arm/plat-mxc/include/mach/common.h |  7 ++++++-
 arch/arm/plat-mxc/irq.c                 |  4 ++--
 22 files changed, 53 insertions(+), 21 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx1/generic.c b/arch/arm/mach-mx1/generic.c
index bbb6c7b8766..7f9fc1034c0 100644
--- a/arch/arm/mach-mx1/generic.c
+++ b/arch/arm/mach-mx1/generic.c
@@ -45,3 +45,9 @@ void __init mx1_map_io(void)
 
 	iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
 }
+
+void __init mx1_init_irq(void)
+{
+	mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+}
+
diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c
index e5b0c0a83c3..6af064d19b0 100644
--- a/arch/arm/mach-mx1/mx1ads.c
+++ b/arch/arm/mach-mx1/mx1ads.c
@@ -151,7 +151,7 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS")
 	.io_pg_offst	= (IMX_IO_BASE >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x100,
 	.map_io		= mx1_map_io,
-	.init_irq	= mxc_init_irq,
+	.init_irq	= mx1_init_irq,
 	.timer		= &mx1ads_timer,
 	.init_machine	= mx1ads_init,
 MACHINE_END
@@ -161,7 +161,7 @@ MACHINE_START(MXLADS, "Freescale MXLADS")
 	.io_pg_offst	= (IMX_IO_BASE >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x100,
 	.map_io		= mx1_map_io,
-	.init_irq	= mxc_init_irq,
+	.init_irq	= mx1_init_irq,
 	.timer		= &mx1ads_timer,
 	.init_machine	= mx1ads_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx1/scb9328.c b/arch/arm/mach-mx1/scb9328.c
index 20e0b5bcdff..125d495e9c7 100644
--- a/arch/arm/mach-mx1/scb9328.c
+++ b/arch/arm/mach-mx1/scb9328.c
@@ -154,7 +154,7 @@ MACHINE_START(SCB9328, "Synertronixx scb9328")
 	.io_pg_offst	= ((0xe0200000) >> 18) & 0xfffc,
 	.boot_params	= 0x08000100,
 	.map_io		= mx1_map_io,
-	.init_irq	= mxc_init_irq,
+	.init_irq	= mx1_init_irq,
 	.timer		= &scb9328_timer,
 	.init_machine	= scb9328_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c
index bdc5a6e67be..ae8f759134d 100644
--- a/arch/arm/mach-mx2/generic.c
+++ b/arch/arm/mach-mx2/generic.c
@@ -85,3 +85,13 @@ void __init mx27_map_io(void)
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
 
+void __init mx27_init_irq(void)
+{
+	mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+}
+
+void __init mx21_init_irq(void)
+{
+	mx27_init_irq();
+}
+
diff --git a/arch/arm/mach-mx2/mx21ads.c b/arch/arm/mach-mx2/mx21ads.c
index a5ee461cb40..a525783ceea 100644
--- a/arch/arm/mach-mx2/mx21ads.c
+++ b/arch/arm/mach-mx2/mx21ads.c
@@ -280,7 +280,7 @@ MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
 	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx21ads_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx21_init_irq,
 	.init_machine   = mx21ads_board_init,
 	.timer          = &mx21ads_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
index 02daddac699..a9f69eb58b7 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -330,7 +330,7 @@ MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
 	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx27ads_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx27_init_irq,
 	.init_machine   = mx27ads_board_init,
 	.timer          = &mx27ads_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx2/mx27lite.c b/arch/arm/mach-mx2/mx27lite.c
index 3ae11cb8c04..82ea227ea0c 100644
--- a/arch/arm/mach-mx2/mx27lite.c
+++ b/arch/arm/mach-mx2/mx27lite.c
@@ -89,7 +89,7 @@ MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
 	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx27_init_irq,
 	.init_machine   = mx27lite_init,
 	.timer          = &mx27lite_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx2/mx27pdk.c b/arch/arm/mach-mx2/mx27pdk.c
index 1d9238c7a6c..6761d1b79e4 100644
--- a/arch/arm/mach-mx2/mx27pdk.c
+++ b/arch/arm/mach-mx2/mx27pdk.c
@@ -89,7 +89,7 @@ MACHINE_START(MX27_3DS, "Freescale MX27PDK")
 	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx27_init_irq,
 	.init_machine   = mx27pdk_init,
 	.timer          = &mx27pdk_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index a4628d00434..638d078304c 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -241,7 +241,7 @@ MACHINE_START(PCM038, "phyCORE-i.MX27")
 	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx27_init_irq,
 	.init_machine   = pcm038_init,
 	.timer          = &pcm038_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/armadillo5x0.c
index ee331fd6b1b..776c0ee1b3c 100644
--- a/arch/arm/mach-mx3/armadillo5x0.c
+++ b/arch/arm/mach-mx3/armadillo5x0.c
@@ -352,7 +352,7 @@ MACHINE_START(ARMADILLO5X0, "Armadillo-500")
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.map_io		= mx31_map_io,
-	.init_irq	= mxc_init_irq,
+	.init_irq	= mx31_init_irq,
 	.timer		= &armadillo5x0_timer,
 	.init_machine	= armadillo5x0_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index f0d5ae533b4..c327172159c 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -88,6 +88,16 @@ void __init mx35_map_io(void)
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
 
+void __init mx31_init_irq(void)
+{
+	mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+}
+
+void __init mx35_init_irq(void)
+{
+	mx31_init_irq();
+}
+
 #ifdef CONFIG_CACHE_L2X0
 static int mxc_init_l2x0(void)
 {
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index 30e2767a78a..0497c152be1 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -517,7 +517,7 @@ static void __init mx31ads_map_io(void)
 
 static void __init mx31ads_init_irq(void)
 {
-	mxc_init_irq();
+	mx31_init_irq();
 	mx31ads_init_expio();
 }
 
diff --git a/arch/arm/mach-mx3/mx31lilly.c b/arch/arm/mach-mx3/mx31lilly.c
index 6ab2f163cb9..423025150f6 100644
--- a/arch/arm/mach-mx3/mx31lilly.c
+++ b/arch/arm/mach-mx3/mx31lilly.c
@@ -148,7 +148,7 @@ MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x100,
 	.map_io		= mx31_map_io,
-	.init_irq	= mxc_init_irq,
+	.init_irq	= mx31_init_irq,
 	.init_machine	= mx31lilly_board_init,
 	.timer		= &mx31lilly_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
index 86fe70fa3e1..b1c0afc40cf 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -162,7 +162,7 @@ MACHINE_START(MX31LITE, "LogicPD MX31 LITEKIT")
 	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx31lite_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx31_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &mx31lite_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index a17f2e41160..b86b8a757c9 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -36,6 +36,7 @@
 #include <mach/iomux-mx3.h>
 #include <mach/i2c.h>
 #include <mach/mmc.h>
+#include <mach/mx31.h>
 
 #include "devices.h"
 
@@ -197,7 +198,7 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx31_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx31_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &mx31moboard_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mx31pdk.c
index c19838d2e36..0f7a2f06bc2 100644
--- a/arch/arm/mach-mx3/mx31pdk.c
+++ b/arch/arm/mach-mx3/mx31pdk.c
@@ -265,7 +265,7 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx31pdk_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx31_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &mx31pdk_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mx35pdk.c b/arch/arm/mach-mx3/mx35pdk.c
index 6d15374414b..6ff186e46ce 100644
--- a/arch/arm/mach-mx3/mx35pdk.c
+++ b/arch/arm/mach-mx3/mx35pdk.c
@@ -98,7 +98,7 @@ MACHINE_START(MX35_3DS, "Freescale MX35PDK")
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx35_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx35_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &mx35pdk_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index 840cfda341d..d8472206de9 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -592,7 +592,7 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx31_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx31_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &pcm037_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/pcm043.c
index 8d27c324abf..7c7d3cc07b8 100644
--- a/arch/arm/mach-mx3/pcm043.c
+++ b/arch/arm/mach-mx3/pcm043.c
@@ -245,7 +245,7 @@ MACHINE_START(PCM043, "Phytec Phycore pcm043")
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx35_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx35_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &pcm043_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/qong.c
index 82b31c4ab11..0bca4d914ab 100644
--- a/arch/arm/mach-mx3/qong.c
+++ b/arch/arm/mach-mx3/qong.c
@@ -280,7 +280,7 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
 	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx31_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx31_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &qong_timer,
 MACHINE_END
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 1dc31d6dd43..cd8f215c1ad 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -19,7 +19,12 @@ extern void mx21_map_io(void);
 extern void mx27_map_io(void);
 extern void mx31_map_io(void);
 extern void mx35_map_io(void);
-extern void mxc_init_irq(void);
+extern void mxc_init_irq(void __iomem *);
+extern void mx1_init_irq(void);
+extern void mx21_init_irq(void);
+extern void mx27_init_irq(void);
+extern void mx31_init_irq(void);
+extern void mx35_init_irq(void);
 extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
 extern int mx1_clocks_init(unsigned long fref);
 extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index 8aee76304f8..618a8b24ed1 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -113,11 +113,11 @@ static struct irq_chip mxc_avic_chip = {
  * interrupts. It registers the interrupt enable and disable functions
  * to the kernel for each interrupt source.
  */
-void __init mxc_init_irq(void)
+void __init mxc_init_irq(void __iomem *irqbase)
 {
 	int i;
 
-	avic_base = IO_ADDRESS(AVIC_BASE_ADDR);
+	avic_base = irqbase;
 
 	/* put the AVIC into the reset value with
 	 * all interrupts disabled
-- 
cgit v1.2.3


From 997d74b18ae1d0d8f4c4469a5d1ce8d73ca8402c Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 4 Jun 2009 10:32:08 +0200
Subject: MXC iomux-v3: Fix defines for PAD_CTL registers

The old defines leaked in from an old version of the patch.
Change the defines to match the register layout of the iomuxer.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/iomux-v3.h | 30 +++++++++++++-----------------
 1 file changed, 13 insertions(+), 17 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
index 7cd84547658..cd06df9370c 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-v3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
@@ -68,28 +68,24 @@ struct pad_desc {
 /*
  * Use to set PAD control
  */
-#define PAD_CTL_DRIVE_VOLTAGE_3_3_V	0
-#define PAD_CTL_DRIVE_VOLTAGE_1_8_V	1
 
-#define PAD_CTL_NO_HYSTERESIS		0
-#define PAD_CTL_HYSTERESIS		1
+#define PAD_CTL_DVS			(1 << 13)
+#define PAD_CTL_HYS			(1 << 8)
 
-#define PAD_CTL_PULL_DISABLED		0x0
-#define PAD_CTL_PULL_KEEPER		0xa
-#define PAD_CTL_PULL_DOWN_100K		0xc
-#define PAD_CTL_PULL_UP_47K		0xd
-#define PAD_CTL_PULL_UP_100K		0xe
-#define PAD_CTL_PULL_UP_22K		0xf
+#define PAD_CTL_PKE			(1 << 7)
+#define PAD_CTL_PUE			(1 << 6)
+#define PAD_CTL_PUS_100K_DOWN		(0 << 4)
+#define PAD_CTL_PUS_47K_UP		(1 << 4)
+#define PAD_CTL_PUS_100K_UP		(2 << 4)
+#define PAD_CTL_PUS_22K_UP		(3 << 4)
 
-#define PAD_CTL_OUTPUT_CMOS		0
-#define PAD_CTL_OUTPUT_OPEN_DRAIN	1
+#define PAD_CTL_ODE			(1 << 3)
 
-#define PAD_CTL_DRIVE_STRENGTH_NORM	0
-#define PAD_CTL_DRIVE_STRENGTH_HIGH	1
-#define PAD_CTL_DRIVE_STRENGTH_MAX	2
+#define PAD_CTL_DSE_STANDARD		(0 << 1)
+#define PAD_CTL_DSE_HIGH		(1 << 1)
+#define PAD_CTL_DSE_MAX			(2 << 1)
 
-#define PAD_CTL_SLEW_RATE_SLOW		0
-#define PAD_CTL_SLEW_RATE_FAST		1
+#define PAD_CTL_SRE_FAST		(1 << 0)
 
 /*
  * setups a single pad:
-- 
cgit v1.2.3


From aa68c02777702f05ea5f075e3001288c30ffcb1c Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue, 23 Jun 2009 11:52:26 +0200
Subject: mx2: remove mxc_irda platform device

Irda support is handled by the normal ims serial driver, so
we do not need this device.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/devices.c | 24 ------------------------
 arch/arm/mach-mx2/devices.h |  1 -
 2 files changed, 25 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index a0f1b367432..e6f0f4f1558 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -39,30 +39,6 @@
 
 #include "devices.h"
 
-/*
- * Resource definition for the MXC IrDA
- */
-static struct resource mxc_irda_resources[] = {
-	[0] = {
-		.start   = UART3_BASE_ADDR,
-		.end     = UART3_BASE_ADDR + SZ_4K - 1,
-		.flags   = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start   = MXC_INT_UART3,
-		.end     = MXC_INT_UART3,
-		.flags   = IORESOURCE_IRQ,
-	},
-};
-
-/* Platform Data for MXC IrDA */
-struct platform_device mxc_irda_device = {
-	.name = "mxc_irda",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_irda_resources),
-	.resource = mxc_irda_resources,
-};
-
 /*
  * General Purpose Timer
  * - i.MX1: 2 timer (slighly different register handling)
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h
index 049005bb6aa..c79ba7fed1b 100644
--- a/arch/arm/mach-mx2/devices.h
+++ b/arch/arm/mach-mx2/devices.h
@@ -4,7 +4,6 @@ extern struct platform_device mxc_gpt3;
 extern struct platform_device mxc_gpt4;
 extern struct platform_device mxc_gpt5;
 extern struct platform_device mxc_wdt;
-extern struct platform_device mxc_irda_device;
 extern struct platform_device mxc_uart_device0;
 extern struct platform_device mxc_uart_device1;
 extern struct platform_device mxc_uart_device2;
-- 
cgit v1.2.3


From bf50bcc242db7f8d2fb6bc099c1693149d9fb5d5 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue, 23 Jun 2009 12:04:36 +0200
Subject: mx2: Codingstyle: Let the compiler count arrays

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/devices.c | 165 ++++++++++++++++++++------------------------
 1 file changed, 73 insertions(+), 92 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index e6f0f4f1558..cbf42467466 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -41,20 +41,18 @@
 
 /*
  * General Purpose Timer
- * - i.MX1: 2 timer (slighly different register handling)
- * - i.MX21: 3 timer
- * - i.MX27: 6 timer
+ * - i.MX21: 3 timers
+ * - i.MX27: 6 timers
  */
 
 /* We use gpt0 as system timer, so do not add a device for this one */
 
 static struct resource timer1_resources[] = {
-	[0] = {
+	{
 		.start	= GPT2_BASE_ADDR,
 		.end	= GPT2_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start   = MXC_INT_GPT2,
 		.end     = MXC_INT_GPT2,
 		.flags   = IORESOURCE_IRQ,
@@ -65,16 +63,15 @@ struct platform_device mxc_gpt1 = {
 	.name = "imx_gpt",
 	.id = 1,
 	.num_resources = ARRAY_SIZE(timer1_resources),
-	.resource = timer1_resources
+	.resource = timer1_resources,
 };
 
 static struct resource timer2_resources[] = {
-	[0] = {
+	{
 		.start	= GPT3_BASE_ADDR,
 		.end	= GPT3_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start   = MXC_INT_GPT3,
 		.end     = MXC_INT_GPT3,
 		.flags   = IORESOURCE_IRQ,
@@ -85,17 +82,16 @@ struct platform_device mxc_gpt2 = {
 	.name = "imx_gpt",
 	.id = 2,
 	.num_resources = ARRAY_SIZE(timer2_resources),
-	.resource = timer2_resources
+	.resource = timer2_resources,
 };
 
 #ifdef CONFIG_MACH_MX27
 static struct resource timer3_resources[] = {
-	[0] = {
+	{
 		.start	= GPT4_BASE_ADDR,
 		.end	= GPT4_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start   = MXC_INT_GPT4,
 		.end     = MXC_INT_GPT4,
 		.flags   = IORESOURCE_IRQ,
@@ -106,16 +102,15 @@ struct platform_device mxc_gpt3 = {
 	.name = "imx_gpt",
 	.id = 3,
 	.num_resources = ARRAY_SIZE(timer3_resources),
-	.resource = timer3_resources
+	.resource = timer3_resources,
 };
 
 static struct resource timer4_resources[] = {
-	[0] = {
+	{
 		.start	= GPT5_BASE_ADDR,
 		.end	= GPT5_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start   = MXC_INT_GPT5,
 		.end     = MXC_INT_GPT5,
 		.flags   = IORESOURCE_IRQ,
@@ -126,16 +121,15 @@ struct platform_device mxc_gpt4 = {
 	.name = "imx_gpt",
 	.id = 4,
 	.num_resources = ARRAY_SIZE(timer4_resources),
-	.resource = timer4_resources
+	.resource = timer4_resources,
 };
 
 static struct resource timer5_resources[] = {
-	[0] = {
+	{
 		.start	= GPT6_BASE_ADDR,
 		.end	= GPT6_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start   = MXC_INT_GPT6,
 		.end     = MXC_INT_GPT6,
 		.flags   = IORESOURCE_IRQ,
@@ -146,7 +140,7 @@ struct platform_device mxc_gpt5 = {
 	.name = "imx_gpt",
 	.id = 5,
 	.num_resources = ARRAY_SIZE(timer5_resources),
-	.resource = timer5_resources
+	.resource = timer5_resources,
 };
 #endif
 
@@ -190,11 +184,11 @@ static struct resource mxc_nand_resources[] = {
 	{
 		.start	= NFC_BASE_ADDR,
 		.end	= NFC_BASE_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM
+		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= MXC_INT_NANDFC,
 		.end	= MXC_INT_NANDFC,
-		.flags	= IORESOURCE_IRQ
+		.flags	= IORESOURCE_IRQ,
 	},
 };
 
@@ -216,8 +210,7 @@ static struct resource mxc_fb[] = {
 		.start = LCDC_BASE_ADDR,
 		.end   = LCDC_BASE_ADDR + 0xFFF,
 		.flags = IORESOURCE_MEM,
-	},
-	{
+	}, {
 		.start = MXC_INT_LCDC,
 		.end   = MXC_INT_LCDC,
 		.flags = IORESOURCE_IRQ,
@@ -240,11 +233,11 @@ static struct resource mxc_fec_resources[] = {
 	{
 		.start	= FEC_BASE_ADDR,
 		.end	= FEC_BASE_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM
+		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= MXC_INT_FEC,
 		.end	= MXC_INT_FEC,
-		.flags	= IORESOURCE_IRQ
+		.flags	= IORESOURCE_IRQ,
 	},
 };
 
@@ -257,15 +250,14 @@ struct platform_device mxc_fec_device = {
 #endif
 
 static struct resource mxc_i2c_1_resources[] = {
-	[0] = {
+	{
 		.start	= I2C_BASE_ADDR,
 		.end	= I2C_BASE_ADDR + 0x0fff,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start	= MXC_INT_I2C,
 		.end	= MXC_INT_I2C,
-		.flags	= IORESOURCE_IRQ
+		.flags	= IORESOURCE_IRQ,
 	}
 };
 
@@ -273,20 +265,19 @@ struct platform_device mxc_i2c_device0 = {
 	.name = "imx-i2c",
 	.id = 0,
 	.num_resources = ARRAY_SIZE(mxc_i2c_1_resources),
-	.resource = mxc_i2c_1_resources
+	.resource = mxc_i2c_1_resources,
 };
 
 #ifdef CONFIG_MACH_MX27
 static struct resource mxc_i2c_2_resources[] = {
-	[0] = {
+	{
 		.start	= I2C2_BASE_ADDR,
 		.end	= I2C2_BASE_ADDR + 0x0fff,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start	= MXC_INT_I2C2,
 		.end	= MXC_INT_I2C2,
-		.flags	= IORESOURCE_IRQ
+		.flags	= IORESOURCE_IRQ,
 	}
 };
 
@@ -294,17 +285,16 @@ struct platform_device mxc_i2c_device1 = {
 	.name = "imx-i2c",
 	.id = 1,
 	.num_resources = ARRAY_SIZE(mxc_i2c_2_resources),
-	.resource = mxc_i2c_2_resources
+	.resource = mxc_i2c_2_resources,
 };
 #endif
 
 static struct resource mxc_pwm_resources[] = {
-	[0] = {
+	{
 		.start	= PWM_BASE_ADDR,
 		.end	= PWM_BASE_ADDR + 0x0fff,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start   = MXC_INT_PWM,
 		.end     = MXC_INT_PWM,
 		.flags   = IORESOURCE_IRQ,
@@ -315,28 +305,26 @@ struct platform_device mxc_pwm_device = {
 	.name = "mxc_pwm",
 	.id = 0,
 	.num_resources = ARRAY_SIZE(mxc_pwm_resources),
-	.resource = mxc_pwm_resources
+	.resource = mxc_pwm_resources,
 };
 
 /*
  * Resource definition for the MXC SDHC
  */
 static struct resource mxc_sdhc1_resources[] = {
-	[0] = {
-			.start = SDHC1_BASE_ADDR,
-			.end   = SDHC1_BASE_ADDR + SZ_4K - 1,
-			.flags = IORESOURCE_MEM,
-			},
-	[1] = {
-			.start = MXC_INT_SDHC1,
-			.end   = MXC_INT_SDHC1,
-			.flags = IORESOURCE_IRQ,
-			},
-	[2] = {
-			.start  = DMA_REQ_SDHC1,
-			.end    = DMA_REQ_SDHC1,
-			.flags  = IORESOURCE_DMA
-		},
+	{
+		.start = SDHC1_BASE_ADDR,
+		.end   = SDHC1_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_SDHC1,
+		.end   = MXC_INT_SDHC1,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start  = DMA_REQ_SDHC1,
+		.end    = DMA_REQ_SDHC1,
+		.flags  = IORESOURCE_DMA,
+	},
 };
 
 static u64 mxc_sdhc1_dmamask = 0xffffffffUL;
@@ -353,21 +341,19 @@ struct platform_device mxc_sdhc_device0 = {
 };
 
 static struct resource mxc_sdhc2_resources[] = {
-	[0] = {
-			.start = SDHC2_BASE_ADDR,
-			.end   = SDHC2_BASE_ADDR + SZ_4K - 1,
-			.flags = IORESOURCE_MEM,
-			},
-	[1] = {
-			.start = MXC_INT_SDHC2,
-			.end   = MXC_INT_SDHC2,
-			.flags = IORESOURCE_IRQ,
-			},
-	[2] = {
-			.start  = DMA_REQ_SDHC2,
-			.end    = DMA_REQ_SDHC2,
-			.flags  = IORESOURCE_DMA
-		},
+	{
+		.start = SDHC2_BASE_ADDR,
+		.end   = SDHC2_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_SDHC2,
+		.end   = MXC_INT_SDHC2,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start  = DMA_REQ_SDHC2,
+		.end    = DMA_REQ_SDHC2,
+		.flags  = IORESOURCE_DMA,
+	},
 };
 
 static u64 mxc_sdhc2_dmamask = 0xffffffffUL;
@@ -385,33 +371,28 @@ struct platform_device mxc_sdhc_device1 = {
 
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
-	[0] = {
+	{
 		.chip.label = "gpio-0",
 		.irq = MXC_INT_GPIO,
 		.base = IO_ADDRESS(GPIO_BASE_ADDR),
 		.virtual_irq_start = MXC_GPIO_IRQ_START,
-	},
-	[1] = {
+	}, {
 		.chip.label = "gpio-1",
 		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
-	},
-	[2] = {
+	}, {
 		.chip.label = "gpio-2",
 		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
-	},
-	[3] = {
+	}, {
 		.chip.label = "gpio-3",
 		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
-	},
-	[4] = {
+	}, {
 		.chip.label = "gpio-4",
 		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x400),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 128,
-	},
-	[5] = {
+	}, {
 		.chip.label = "gpio-5",
 		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x500),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 160,
-- 
cgit v1.2.3


From 3f4f54b4f0052e9838f6bb98535746464d0c01c3 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue, 23 Jun 2009 12:12:00 +0200
Subject: mx3: Codingstyle: Let the compiler count arrays

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/devices.c  | 25 ++++++++++---------------
 arch/arm/mach-mx3/mx31lite.c |  5 ++---
 arch/arm/mach-mx3/pcm037.c   |  5 ++---
 arch/arm/mach-mx3/qong.c     |  5 ++---
 4 files changed, 16 insertions(+), 24 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index 9e87e08fb12..7a5c2ef52a4 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -129,19 +129,17 @@ struct platform_device mxc_uart_device4 = {
 
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
-	[0] = {
+	{
 		.chip.label = "gpio-0",
 		.base = IO_ADDRESS(GPIO1_BASE_ADDR),
 		.irq = MXC_INT_GPIO1,
 		.virtual_irq_start = MXC_GPIO_IRQ_START,
-	},
-	[1] = {
+	}, {
 		.chip.label = "gpio-1",
 		.base = IO_ADDRESS(GPIO2_BASE_ADDR),
 		.irq = MXC_INT_GPIO2,
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
-	},
-	[2] = {
+	}, {
 		.chip.label = "gpio-2",
 		.base = IO_ADDRESS(GPIO3_BASE_ADDR),
 		.irq = MXC_INT_GPIO3,
@@ -173,11 +171,11 @@ static struct resource mxc_nand_resources[] = {
 	{
 		.start	= 0, /* runtime dependent */
 		.end	= 0,
-		.flags	= IORESOURCE_MEM
+		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= MXC_INT_NANDFC,
 		.end	= MXC_INT_NANDFC,
-		.flags	= IORESOURCE_IRQ
+		.flags	= IORESOURCE_IRQ,
 	},
 };
 
@@ -193,8 +191,7 @@ static struct resource mxc_i2c0_resources[] = {
 		.start = I2C_BASE_ADDR,
 		.end = I2C_BASE_ADDR + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
-	},
-	{
+	}, {
 		.start = MXC_INT_I2C,
 		.end = MXC_INT_I2C,
 		.flags = IORESOURCE_IRQ,
@@ -213,8 +210,7 @@ static struct resource mxc_i2c1_resources[] = {
 		.start = I2C2_BASE_ADDR,
 		.end = I2C2_BASE_ADDR + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
-	},
-	{
+	}, {
 		.start = MXC_INT_I2C2,
 		.end = MXC_INT_I2C2,
 		.flags = IORESOURCE_IRQ,
@@ -233,8 +229,7 @@ static struct resource mxc_i2c2_resources[] = {
 		.start = I2C3_BASE_ADDR,
 		.end = I2C3_BASE_ADDR + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
-	},
-	{
+	}, {
 		.start = MXC_INT_I2C3,
 		.end = MXC_INT_I2C3,
 		.flags = IORESOURCE_IRQ,
@@ -400,11 +395,11 @@ static struct resource mxc_fec_resources[] = {
 	{
 		.start	= MXC_FEC_BASE_ADDR,
 		.end	= MXC_FEC_BASE_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM
+		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= MXC_INT_FEC,
 		.end	= MXC_INT_FEC,
-		.flags	= IORESOURCE_IRQ
+		.flags	= IORESOURCE_IRQ,
 	},
 };
 
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
index b1c0afc40cf..a8d57decdfd 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -71,12 +71,11 @@ static struct smsc911x_platform_config smsc911x_config = {
 };
 
 static struct resource smsc911x_resources[] = {
-	[0] = {
+	{
 		.start		= CS4_BASE_ADDR,
 		.end		= CS4_BASE_ADDR + 0x100,
 		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start		= IOMUX_TO_IRQ(MX31_PIN_SFS6),
 		.end		= IOMUX_TO_IRQ(MX31_PIN_SFS6),
 		.flags		= IORESOURCE_IRQ,
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index d8472206de9..c755c06b75d 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -244,12 +244,11 @@ static struct imxuart_platform_data uart_pdata = {
 };
 
 static struct resource smsc911x_resources[] = {
-	[0] = {
+	{
 		.start		= CS1_BASE_ADDR + 0x300,
 		.end		= CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
 		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start		= IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
 		.end		= IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
 		.flags		= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/qong.c
index 0bca4d914ab..044511f1b9a 100644
--- a/arch/arm/mach-mx3/qong.c
+++ b/arch/arm/mach-mx3/qong.c
@@ -81,13 +81,12 @@ static inline void mxc_init_imx_uart(void)
 }
 
 static struct resource dnet_resources[] = {
-	[0] = {
+	{
 		.name	= "dnet-memory",
 		.start	= QONG_DNET_BASEADDR,
 		.end	= QONG_DNET_BASEADDR + QONG_DNET_SIZE - 1,
 		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start	= QONG_FPGA_IRQ,
 		.end	= QONG_FPGA_IRQ,
 		.flags	= IORESOURCE_IRQ,
-- 
cgit v1.2.3


From 9b0e6db0da1ea433f38b8d952108746f3fc67304 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue, 23 Jun 2009 12:14:39 +0200
Subject: mx1: Codingstyle: Let the compiler count arrays

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx1/devices.c | 87 +++++++++++++++++----------------------------
 arch/arm/mach-mx1/scb9328.c | 14 ++++----
 2 files changed, 39 insertions(+), 62 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx1/devices.c b/arch/arm/mach-mx1/devices.c
index 76d1ffb4807..b6be29d1cb0 100644
--- a/arch/arm/mach-mx1/devices.c
+++ b/arch/arm/mach-mx1/devices.c
@@ -29,12 +29,11 @@
 #include "devices.h"
 
 static struct resource imx_csi_resources[] = {
-	[0] = {
+	{
 		.start  = 0x00224000,
 		.end    = 0x00224010,
 		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start  = CSI_INT,
 		.end    = CSI_INT,
 		.flags  = IORESOURCE_IRQ,
@@ -55,12 +54,11 @@ struct platform_device imx_csi_device = {
 };
 
 static struct resource imx_i2c_resources[] = {
-	[0] = {
+	{
 		.start  = 0x00217000,
 		.end    = 0x00217010,
 		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start  = I2C_INT,
 		.end    = I2C_INT,
 		.flags  = IORESOURCE_IRQ,
@@ -75,22 +73,19 @@ struct platform_device imx_i2c_device = {
 };
 
 static struct resource imx_uart1_resources[] = {
-	[0] = {
+	{
 		.start	= UART1_BASE_ADDR,
 		.end	= UART1_BASE_ADDR + 0xD0,
 		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start	= UART1_MINT_RX,
 		.end	= UART1_MINT_RX,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
+	}, {
 		.start	= UART1_MINT_TX,
 		.end	= UART1_MINT_TX,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
+	}, {
 		.start	= UART1_MINT_RTS,
 		.end	= UART1_MINT_RTS,
 		.flags	= IORESOURCE_IRQ,
@@ -105,22 +100,19 @@ struct platform_device imx_uart1_device = {
 };
 
 static struct resource imx_uart2_resources[] = {
-	[0] = {
+	{
 		.start	= UART2_BASE_ADDR,
 		.end	= UART2_BASE_ADDR + 0xD0,
 		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start	= UART2_MINT_RX,
 		.end	= UART2_MINT_RX,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
+	}, {
 		.start	= UART2_MINT_TX,
 		.end	= UART2_MINT_TX,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
+	}, {
 		.start	= UART2_MINT_RTS,
 		.end	= UART2_MINT_RTS,
 		.flags	= IORESOURCE_IRQ,
@@ -135,17 +127,15 @@ struct platform_device imx_uart2_device = {
 };
 
 static struct resource imx_rtc_resources[] = {
-	[0] = {
+	{
 		.start  = 0x00204000,
 		.end    = 0x00204024,
 		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start  = RTC_INT,
 		.end    = RTC_INT,
 		.flags  = IORESOURCE_IRQ,
-	},
-	[2] = {
+	}, {
 		.start  = RTC_SAMINT,
 		.end    = RTC_SAMINT,
 		.flags  = IORESOURCE_IRQ,
@@ -160,12 +150,11 @@ struct platform_device imx_rtc_device = {
 };
 
 static struct resource imx_wdt_resources[] = {
-	[0] = {
+	{
 		.start  = 0x00201000,
 		.end    = 0x00201008,
 		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start  = WDT_INT,
 		.end    = WDT_INT,
 		.flags  = IORESOURCE_IRQ,
@@ -180,42 +169,35 @@ struct platform_device imx_wdt_device = {
 };
 
 static struct resource imx_usb_resources[] = {
-	[0] = {
+	{
 		.start	= 0x00212000,
 		.end	= 0x00212148,
 		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start	= USBD_INT0,
 		.end	= USBD_INT0,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
+	}, {
 		.start	= USBD_INT1,
 		.end	= USBD_INT1,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
+	}, {
 		.start	= USBD_INT2,
 		.end	= USBD_INT2,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[4] = {
+	}, {
 		.start	= USBD_INT3,
 		.end	= USBD_INT3,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[5] = {
+	}, {
 		.start	= USBD_INT4,
 		.end	= USBD_INT4,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[6] = {
+	}, {
 		.start	= USBD_INT5,
 		.end	= USBD_INT5,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[7] = {
+	}, {
 		.start	= USBD_INT6,
 		.end	= USBD_INT6,
 		.flags	= IORESOURCE_IRQ,
@@ -231,29 +213,26 @@ struct platform_device imx_usb_device = {
 
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
-	[0] = {
+	{
 		.chip.label = "gpio-0",
 		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR),
 		.irq = GPIO_INT_PORTA,
-		.virtual_irq_start = MXC_GPIO_IRQ_START
-	},
-	[1] = {
+		.virtual_irq_start = MXC_GPIO_IRQ_START,
+	}, {
 		.chip.label = "gpio-1",
 		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
 		.irq = GPIO_INT_PORTB,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 32
-	},
-	[2] = {
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
+	}, {
 		.chip.label = "gpio-2",
 		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
 		.irq = GPIO_INT_PORTC,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 64
-	},
-	[3] = {
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
+	}, {
 		.chip.label = "gpio-3",
 		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
 		.irq = GPIO_INT_PORTD,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 96
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
 	}
 };
 
diff --git a/arch/arm/mach-mx1/scb9328.c b/arch/arm/mach-mx1/scb9328.c
index 125d495e9c7..325d98df605 100644
--- a/arch/arm/mach-mx1/scb9328.c
+++ b/arch/arm/mach-mx1/scb9328.c
@@ -68,22 +68,20 @@ static struct dm9000_plat_data dm9000_platdata = {
  * to gain access to address latch registers and the data path.
  */
 static struct resource dm9000x_resources[] = {
-	[0] = {
+	{
 		.name	= "address area",
 		.start	= IMX_CS5_PHYS,
 		.end	= IMX_CS5_PHYS + 1,
-		.flags	= IORESOURCE_MEM	/* address access */
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,	/* address access */
+	}, {
 		.name	= "data area",
 		.start	= IMX_CS5_PHYS + 4,
 		.end	= IMX_CS5_PHYS + 5,
-		.flags	= IORESOURCE_MEM	/* data access */
-	},
-	[2] = {
+		.flags	= IORESOURCE_MEM,	/* data access */
+	}, {
 		.start	= IRQ_GPIOC(3),
 		.end	= IRQ_GPIOC(3),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 	},
 };
 
-- 
cgit v1.2.3


From f497d0153a6b53b4cfd004de5f10b14bf630d852 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Wed, 18 Mar 2009 11:29:31 +0100
Subject: imxfb: calculate bpix value from bits_per_pixel

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/imxfb.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-mxc/include/mach/imxfb.h b/arch/arm/plat-mxc/include/mach/imxfb.h
index 9f0101157ec..66259f6158e 100644
--- a/arch/arm/plat-mxc/include/mach/imxfb.h
+++ b/arch/arm/plat-mxc/include/mach/imxfb.h
@@ -13,7 +13,8 @@
 #define PCR_BPIX_4	(2 << 25)
 #define PCR_BPIX_8	(3 << 25)
 #define PCR_BPIX_12	(4 << 25)
-#define PCR_BPIX_16	(4 << 25)
+#define PCR_BPIX_16	(5 << 25)
+#define PCR_BPIX_18	(6 << 25)
 #define PCR_PIXPOL	(1 << 24)
 #define PCR_FLMPOL	(1 << 23)
 #define PCR_LPPOL	(1 << 22)
-- 
cgit v1.2.3


From 343684ffb793a3c371579b7bbc16724713ee5ac7 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 19 Mar 2009 08:25:41 +0100
Subject: imxfb: Add support for multiple displays

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/mx27ads.c            | 36 +++++++++------
 arch/arm/mach-mx2/pcm970-baseboard.c   | 83 +++++++++++++++++++++++-----------
 arch/arm/plat-mxc/include/mach/imxfb.h | 26 ++++-------
 3 files changed, 88 insertions(+), 57 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
index a9f69eb58b7..83e412b713e 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -183,20 +183,29 @@ void lcd_power(int on)
 		__raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
 }
 
-static struct imx_fb_platform_data mx27ads_fb_data = {
-	.pixclock	= 188679,
-	.xres		= 240,
-	.yres		= 320,
-
-	.bpp		= 16,
-	.hsync_len	= 1,
-	.left_margin	= 9,
-	.right_margin	= 16,
+static struct imx_fb_videomode mx27ads_modes[] = {
+	{
+		.mode = {
+			.name		= "Sharp-LQ035Q7",
+			.refresh	= 60,
+			.xres		= 240,
+			.yres		= 320,
+			.pixclock	= 188679, /* in ps (5.3MHz) */
+			.hsync_len	= 1,
+			.left_margin	= 9,
+			.right_margin	= 16,
+			.vsync_len	= 1,
+			.upper_margin	= 7,
+			.lower_margin	= 9,
+		},
+		.bpp		= 16,
+		.pcr		= 0xFB008BC0,
+	},
+};
 
-	.vsync_len	= 1,
-	.upper_margin	= 7,
-	.lower_margin	= 9,
-	.fixed_screen_cpu = 0,
+static struct imx_fb_platform_data mx27ads_fb_data = {
+	.mode = mx27ads_modes,
+	.num_modes = ARRAY_SIZE(mx27ads_modes),
 
 	/*
 	 * - HSYNC active high
@@ -207,7 +216,6 @@ static struct imx_fb_platform_data mx27ads_fb_data = {
 	 * - data enable low active
 	 * - enable sharp mode
 	 */
-	.pcr		= 0xFB008BC0,
 	.pwmr		= 0x00A903FF,
 	.lscr1		= 0x00120300,
 	.dmacr		= 0x00020010,
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index 6a3acaf57dd..8e2bc94f1a0 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -125,35 +125,64 @@ static struct imxmmc_platform_data sdhc_pdata = {
 	.exit = pcm970_sdhc2_exit,
 };
 
-/*
- * Connected is a portrait Sharp-QVGA display
- * of type: LQ035Q7DH06
- */
-static struct imx_fb_platform_data pcm038_fb_data = {
-	.pixclock	= 188679, /* in ps (5.3MHz) */
-	.xres		= 240,
-	.yres		= 320,
-
-	.bpp		= 16,
-	.hsync_len	= 7,
-	.left_margin	= 5,
-	.right_margin	= 16,
+static struct imx_fb_videomode pcm970_modes[] = {
+	{
+		.mode = {
+			.name		= "Sharp-LQ035Q7",
+			.refresh	= 60,
+			.xres		= 240,
+			.yres		= 320,
+			.pixclock	= 188679, /* in ps (5.3MHz) */
+			.hsync_len	= 7,
+			.left_margin	= 5,
+			.right_margin	= 16,
+			.vsync_len	= 1,
+			.upper_margin	= 7,
+			.lower_margin	= 9,
+		},
+		/*
+		 * - HSYNC active high
+		 * - VSYNC active high
+		 * - clk notenabled while idle
+		 * - clock not inverted
+		 * - data not inverted
+		 * - data enable low active
+		 * - enable sharp mode
+		 */
+		.pcr		= 0xF00080C0,
+		.bpp		= 16,
+	}, {
+		.mode = {
+			.name		= "TX090",
+			.refresh	= 60,
+			.xres		= 240,
+			.yres		= 320,
+			.pixclock	= 38255,
+			.left_margin	= 144,
+			.right_margin	= 0,
+			.upper_margin	= 7,
+			.lower_margin	= 40,
+			.hsync_len	= 96,
+			.vsync_len	= 1,
+		},
+		/*
+		 * - HSYNC active low (1 << 22)
+		 * - VSYNC active low (1 << 23)
+		 * - clk notenabled while idle
+		 * - clock not inverted
+		 * - data not inverted
+		 * - data enable low active
+		 * - enable sharp mode
+		 */
+		.pcr = 0xF0008080 | (1<<22) | (1<<23) | (1<<19),
+		.bpp = 32,
+	},
+};
 
-	.vsync_len	= 1,
-	.upper_margin	= 7,
-	.lower_margin	= 9,
-	.fixed_screen_cpu = 0,
+static struct imx_fb_platform_data pcm038_fb_data = {
+	.mode = pcm970_modes,
+	.num_modes = ARRAY_SIZE(pcm970_modes),
 
-	/*
-	 * - HSYNC active high
-	 * - VSYNC active high
-	 * - clk notenabled while idle
-	 * - clock not inverted
-	 * - data not inverted
-	 * - data enable low active
-	 * - enable sharp mode
-	 */
-	.pcr		= 0xFA0080C0,
 	.pwmr		= 0x00A903FF,
 	.lscr1		= 0x00120300,
 	.dmacr		= 0x00020010,
diff --git a/arch/arm/plat-mxc/include/mach/imxfb.h b/arch/arm/plat-mxc/include/mach/imxfb.h
index 66259f6158e..5263506b7dd 100644
--- a/arch/arm/plat-mxc/include/mach/imxfb.h
+++ b/arch/arm/plat-mxc/include/mach/imxfb.h
@@ -2,6 +2,8 @@
  * This structure describes the machine which we are running on.
  */
 
+#include <linux/fb.h>
+
 #define PCR_TFT		(1 << 31)
 #define PCR_COLOR	(1 << 30)
 #define PCR_PBSIZ_1	(0 << 28)
@@ -47,29 +49,21 @@
 #define DMACR_HM(x)	(((x) & 0xf) << 16)
 #define DMACR_TM(x)	((x) & 0xf)
 
-struct imx_fb_platform_data {
-	u_long		pixclock;
-
-	u_short		xres;
-	u_short		yres;
-
-	u_int		nonstd;
-	u_char		bpp;
-	u_char		hsync_len;
-	u_char		left_margin;
-	u_char		right_margin;
+struct imx_fb_videomode {
+	struct fb_videomode mode;
+	u32 pcr;
+	unsigned char	bpp;
+};
 
-	u_char		vsync_len;
-	u_char		upper_margin;
-	u_char		lower_margin;
-	u_char		sync;
+struct imx_fb_platform_data {
+	struct imx_fb_videomode *mode;
+	int		num_modes;
 
 	u_int		cmap_greyscale:1,
 			cmap_inverse:1,
 			cmap_static:1,
 			unused:29;
 
-	u_int		pcr;
 	u_int		pwmr;
 	u_int		lscr1;
 	u_int		dmacr;
-- 
cgit v1.2.3


From 91bf9a2566a6f507f45ad2fb59802e528f5a9c3f Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue, 23 Jun 2009 13:21:28 +0200
Subject: pcm037: Add support for SJA1000 on baseboard

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/pcm037.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index c755c06b75d..1b9140e2303 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -32,6 +32,7 @@
 #include <linux/spi/spi.h>
 #include <linux/irq.h>
 #include <linux/fsl_devices.h>
+#include <linux/can/platform/sja1000.h>
 
 #include <media/soc_camera.h>
 
@@ -514,6 +515,33 @@ static struct mx3fb_platform_data mx3fb_pdata = {
 	.num_modes	= ARRAY_SIZE(fb_modedb),
 };
 
+static struct resource pcm970_sja1000_resources[] = {
+	{
+		.start   = CS5_BASE_ADDR,
+		.end     = CS5_BASE_ADDR + 0x100 - 1,
+		.flags   = IORESOURCE_MEM,
+	}, {
+		.start   = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
+		.end     = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
+		.flags   = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+struct sja1000_platform_data pcm970_sja1000_platform_data = {
+	.clock		= 16000000 / 2,
+	.ocr		= 0x40 | 0x18,
+	.cdr		= 0x40,
+};
+
+static struct platform_device pcm970_sja1000 = {
+	.name = "sja1000_platform",
+	.dev = {
+		.platform_data = &pcm970_sja1000_platform_data,
+	},
+	.resource = pcm970_sja1000_resources,
+	.num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
+};
+
 /*
  * Board specific initialization.
  */
@@ -574,6 +602,8 @@ static void __init mxc_board_init(void)
 
 	if (!pcm037_camera_alloc_dma(4 * 1024 * 1024))
 		mxc_register_device(&mx3_camera, &camera_pdata);
+
+	platform_device_register(&pcm970_sja1000);
 }
 
 static void __init pcm037_timer_init(void)
-- 
cgit v1.2.3


From 61b032ef263c17bb733cfb3f87a811be52adbe22 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue, 23 Jun 2009 13:21:42 +0200
Subject: pcm038: Add support for SJA1000 on baseboard

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/pcm970-baseboard.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index 8e2bc94f1a0..c261f59b0b4 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -19,6 +19,7 @@
 #include <linux/gpio.h>
 #include <linux/irq.h>
 #include <linux/platform_device.h>
+#include <linux/can/platform/sja1000.h>
 
 #include <asm/mach/arch.h>
 
@@ -188,6 +189,33 @@ static struct imx_fb_platform_data pcm038_fb_data = {
 	.dmacr		= 0x00020010,
 };
 
+static struct resource pcm970_sja1000_resources[] = {
+	{
+		.start   = CS4_BASE_ADDR,
+		.end     = CS4_BASE_ADDR + 0x100 - 1,
+		.flags   = IORESOURCE_MEM,
+	}, {
+		.start   = IRQ_GPIOE(19),
+		.end     = IRQ_GPIOE(19),
+		.flags   = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+struct sja1000_platform_data pcm970_sja1000_platform_data = {
+	.clock		= 16000000 / 2,
+	.ocr		= 0x40 | 0x18,
+	.cdr		= 0x40,
+};
+
+static struct platform_device pcm970_sja1000 = {
+	.name = "sja1000_platform",
+	.dev = {
+		.platform_data = &pcm970_sja1000_platform_data,
+	},
+	.resource = pcm970_sja1000_resources,
+	.num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
+};
+
 /*
  * system init for baseboard usage. Will be called by pcm038 init.
  *
@@ -201,4 +229,5 @@ void __init pcm970_baseboard_init(void)
 
 	mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
 	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
+	platform_device_register(&pcm970_sja1000);
 }
-- 
cgit v1.2.3


From 8afaada2dc9247ffcd2982be824cd290ace18f55 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 15 Jun 2009 12:36:25 +0200
Subject: mxc gpio: CONFIG_ARCH_* -> cpu_is_*()

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/gpio.c | 25 +++++++++++--------------
 1 file changed, 11 insertions(+), 14 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index 7506d963be4..b7071572035 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -162,7 +162,6 @@ static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
 	}
 }
 
-#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX1)
 /* MX1 and MX3 has one interrupt *per* gpio port */
 static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 {
@@ -174,9 +173,7 @@ static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 
 	mxc_gpio_irq_handler(port, irq_stat);
 }
-#endif
 
-#ifdef CONFIG_ARCH_MX2
 /* MX2 has one interrupt *for all* gpio ports */
 static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 {
@@ -195,7 +192,6 @@ static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 			mxc_gpio_irq_handler(&port[i], irq_stat);
 	}
 }
-#endif
 
 static struct irq_chip gpio_irq_chip = {
 	.ack = gpio_ack_irq,
@@ -284,17 +280,18 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
 		/* its a serious configuration bug when it fails */
 		BUG_ON( gpiochip_add(&port[i].chip) < 0 );
 
-#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX1)
-		/* setup one handler for each entry */
-		set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler);
-		set_irq_data(port[i].irq, &port[i]);
-#endif
+		if (cpu_is_mx1() || cpu_is_mx3()) {
+			/* setup one handler for each entry */
+			set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler);
+			set_irq_data(port[i].irq, &port[i]);
+		}
+	}
+
+	if (cpu_is_mx2()) {
+		/* setup one handler for all GPIO interrupts */
+		set_irq_chained_handler(port[0].irq, mx2_gpio_irq_handler);
+		set_irq_data(port[0].irq, port);
 	}
 
-#ifdef CONFIG_ARCH_MX2
-	/* setup one handler for all GPIO interrupts */
-	set_irq_chained_handler(port[0].irq, mx2_gpio_irq_handler);
-	set_irq_data(port[0].irq, port);
-#endif
 	return 0;
 }
-- 
cgit v1.2.3


From 494f22dddc6308b9c35984118ff4cb1681ad8e48 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Wed, 27 May 2009 18:26:51 +0200
Subject: MXC gpio interrupt support: move register definitions to .c file

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/gpio.c              | 17 +++++++++++++++++
 arch/arm/plat-mxc/include/mach/mx1.h  | 14 --------------
 arch/arm/plat-mxc/include/mach/mx2x.h | 14 --------------
 arch/arm/plat-mxc/include/mach/mx3x.h | 14 --------------
 4 files changed, 17 insertions(+), 42 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index b7071572035..f0315edb3eb 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -29,6 +29,23 @@
 static struct mxc_gpio_port *mxc_gpio_ports;
 static int gpio_table_size;
 
+#define cpu_is_mx1_mx2()	(cpu_is_mx1() || cpu_is_mx2())
+
+#define GPIO_DR		(cpu_is_mx1_mx2() ? 0x1c : 0x00)
+#define GPIO_GDIR	(cpu_is_mx1_mx2() ? 0x00 : 0x04)
+#define GPIO_PSR	(cpu_is_mx1_mx2() ? 0x24 : 0x08)
+#define GPIO_ICR1	(cpu_is_mx1_mx2() ? 0x28 : 0x0C)
+#define GPIO_ICR2	(cpu_is_mx1_mx2() ? 0x2C : 0x10)
+#define GPIO_IMR	(cpu_is_mx1_mx2() ? 0x30 : 0x14)
+#define GPIO_ISR	(cpu_is_mx1_mx2() ? 0x34 : 0x18)
+#define GPIO_ISR	(cpu_is_mx1_mx2() ? 0x34 : 0x18)
+
+#define GPIO_INT_LOW_LEV	(cpu_is_mx1_mx2() ? 0x3 : 0x0)
+#define GPIO_INT_HIGH_LEV	(cpu_is_mx1_mx2() ? 0x2 : 0x1)
+#define GPIO_INT_RISE_EDGE	(cpu_is_mx1_mx2() ? 0x0 : 0x2)
+#define GPIO_INT_FALL_EDGE	(cpu_is_mx1_mx2() ? 0x1 : 0x3)
+#define GPIO_INT_NONE		0x4
+
 /* Note: This driver assumes 32 GPIOs are handled in one register */
 
 static void _clear_gpio_irqstatus(struct mxc_gpio_port *port, u32 index)
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index ee60d64728c..1b2890a5c45 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -134,20 +134,6 @@
 #define GPIO_INT_PORTD		62
 #define WDT_INT			63
 
-/* gpio and gpio based interrupt handling */
-#define GPIO_DR		 	0x1C
-#define GPIO_GDIR	 	0x00
-#define GPIO_PSR	 	0x24
-#define GPIO_ICR1	 	0x28
-#define GPIO_ICR2	 	0x2C
-#define GPIO_IMR	 	0x30
-#define GPIO_ISR	 	0x34
-#define GPIO_INT_LOW_LEV	0x3
-#define GPIO_INT_HIGH_LEV	0x2
-#define GPIO_INT_RISE_EDGE 	0x0
-#define GPIO_INT_FALL_EDGE	0x1
-#define GPIO_INT_NONE		0x4
-
 /* DMA */
 #define DMA_REQ_UART3_T		2
 #define DMA_REQ_UART3_R		3
diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/plat-mxc/include/mach/mx2x.h
index 5982ae5a00d..db5d921e0fe 100644
--- a/arch/arm/plat-mxc/include/mach/mx2x.h
+++ b/arch/arm/plat-mxc/include/mach/mx2x.h
@@ -150,20 +150,6 @@
 #define MXC_INT_GPIO		8
 #define MXC_INT_CSPI3		6
 
-/* gpio and gpio based interrupt handling */
-#define GPIO_DR		 	0x1C
-#define GPIO_GDIR	 	0x00
-#define GPIO_PSR	 	0x24
-#define GPIO_ICR1	 	0x28
-#define GPIO_ICR2	 	0x2C
-#define GPIO_IMR	 	0x30
-#define GPIO_ISR	 	0x34
-#define GPIO_INT_LOW_LEV	0x3
-#define GPIO_INT_HIGH_LEV	0x2
-#define GPIO_INT_RISE_EDGE 	0x0
-#define GPIO_INT_FALL_EDGE	0x1
-#define GPIO_INT_NONE		0x4
-
 /* fixed DMA request numbers */
 #define DMA_REQ_CSI_RX          31
 #define DMA_REQ_CSI_STAT        30
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index 16f68e8f4cf..009f4440276 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -259,20 +259,6 @@
 #define SYSTEM_REV_MIN		CHIP_REV_1_0
 #define SYSTEM_REV_NUM		3
 
-/* gpio and gpio based interrupt handling */
-#define GPIO_DR		 	0x00
-#define GPIO_GDIR	 	0x04
-#define GPIO_PSR	 	0x08
-#define GPIO_ICR1	 	0x0C
-#define GPIO_ICR2	 	0x10
-#define GPIO_IMR	 	0x14
-#define GPIO_ISR	 	0x18
-#define GPIO_INT_LOW_LEV	0x0
-#define GPIO_INT_HIGH_LEV	0x1
-#define GPIO_INT_RISE_EDGE	0x2
-#define GPIO_INT_FALL_EDGE	0x3
-#define GPIO_INT_NONE		0x4
-
 /* Mandatory defines used globally */
 
 #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
-- 
cgit v1.2.3


From 5ef881bbecc72862fa379cb286a50f2781db4cec Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 19 Jun 2009 11:35:08 +0200
Subject: MXC: pwm driver fixes

- fix off-by-one error in divider calculation
- disable pwm in pwm_disable

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/pwm.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index ae34198a79d..42dd17b89ff 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -72,7 +72,7 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
 
 		writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR);
 		writel(period_cycles, pwm->mmio_base + MX3_PWMPR);
-		writel(MX3_PWMCR_PRESCALER(prescale - 1) |
+		writel(MX3_PWMCR_PRESCALER(prescale) |
 			MX3_PWMCR_CLKSRC_IPG_HIGH | MX3_PWMCR_EN,
 			pwm->mmio_base + MX3_PWMCR);
 	} else if (cpu_is_mx1() || cpu_is_mx21()) {
@@ -118,6 +118,8 @@ EXPORT_SYMBOL(pwm_enable);
 
 void pwm_disable(struct pwm_device *pwm)
 {
+	writel(0, pwm->mmio_base + MX3_PWMCR);
+
 	if (pwm->clk_enabled) {
 		clk_disable(pwm->clk);
 		pwm->clk_enabled = 0;
-- 
cgit v1.2.3


From 6d73665f052a8dadf6f33dfd2546e15199ad7c5f Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Wed, 3 Jun 2009 11:22:32 +0200
Subject: MXC PLL decoding: calculate mfn value with less magic

Also, use cpu_is_* macros rather than CONFIG_ARCH_*

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/clock.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c
index 92e13566cd4..f653213b741 100644
--- a/arch/arm/plat-mxc/clock.c
+++ b/arch/arm/plat-mxc/clock.c
@@ -39,6 +39,7 @@
 #include <linux/string.h>
 
 #include <mach/clock.h>
+#include <mach/hardware.h>
 
 static LIST_HEAD(clocks);
 static DEFINE_MUTEX(clocks_mutex);
@@ -363,12 +364,11 @@ unsigned long mxc_decode_pll(unsigned int reg_val, u32 freq)
 
 	mfn_abs = mfn;
 
-#if !defined CONFIG_ARCH_MX1 && !defined CONFIG_ARCH_MX21
-	if (mfn >= 0x200) {
-		mfn |= 0xFFFFFE00;
-		mfn_abs = -mfn;
-	}
-#endif
+	/* On all i.MXs except i.MX1 and i.MX21 mfn is a 10bit
+	 * 2's complements number
+	 */
+	if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200)
+		mfn_abs = 0x400 - mfn;
 
 	freq *= 2;
 	freq /= pd + 1;
@@ -376,8 +376,10 @@ unsigned long mxc_decode_pll(unsigned int reg_val, u32 freq)
 	ll = (unsigned long long)freq * mfn_abs;
 
 	do_div(ll, mfd + 1);
-	if (mfn < 0)
+
+	if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200)
 		ll = -ll;
+
 	ll = (freq * mfi) + ll;
 
 	return ll;
-- 
cgit v1.2.3


From 7dae1134cd4117c1a579f8ae58ce13c1c1ff7164 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Sat, 7 Feb 2009 13:34:01 +0100
Subject: [ARM] MXC: Switch MX1 to clkdev support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx1/clock.c | 84 ++++++++++++++++-------------------------------
 arch/arm/plat-mxc/Kconfig |  1 +
 2 files changed, 29 insertions(+), 56 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx1/clock.c b/arch/arm/mach-mx1/clock.c
index 7b739dd8700..d1b588519ad 100644
--- a/arch/arm/mach-mx1/clock.c
+++ b/arch/arm/mach-mx1/clock.c
@@ -18,11 +18,14 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/list.h>
 #include <linux/math64.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 
+#include <asm/clkdev.h>
+
 #include <mach/clock.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
@@ -94,7 +97,6 @@ static unsigned long clk16m_get_rate(struct clk *clk)
 }
 
 static struct clk clk16m = {
-	.name = "CLK16M",
 	.get_rate = clk16m_get_rate,
 	.enable = _clk_enable,
 	.enable_reg = CCM_CSCR,
@@ -111,7 +113,6 @@ static unsigned long clk32_get_rate(struct clk *clk)
 }
 
 static struct clk clk32 = {
-	.name = "CLK32",
 	.get_rate = clk32_get_rate,
 };
 
@@ -121,7 +122,6 @@ static unsigned long clk32_premult_get_rate(struct clk *clk)
 }
 
 static struct clk clk32_premult = {
-	.name = "CLK32_premultiplier",
 	.parent = &clk32,
 	.get_rate = clk32_premult_get_rate,
 };
@@ -156,7 +156,6 @@ static int prem_clk_set_parent(struct clk *clk, struct clk *parent)
 }
 
 static struct clk prem_clk = {
-	.name = "prem_clk",
 	.set_parent = prem_clk_set_parent,
 };
 
@@ -167,7 +166,6 @@ static unsigned long system_clk_get_rate(struct clk *clk)
 }
 
 static struct clk system_clk = {
-	.name = "system_clk",
 	.parent = &prem_clk,
 	.get_rate = system_clk_get_rate,
 };
@@ -179,7 +177,6 @@ static unsigned long mcu_clk_get_rate(struct clk *clk)
 }
 
 static struct clk mcu_clk = {
-	.name = "mcu_clk",
 	.parent = &clk32_premult,
 	.get_rate = mcu_clk_get_rate,
 };
@@ -195,7 +192,6 @@ static unsigned long fclk_get_rate(struct clk *clk)
 }
 
 static struct clk fclk = {
-	.name = "fclk",
 	.parent = &mcu_clk,
 	.get_rate = fclk_get_rate,
 };
@@ -238,7 +234,6 @@ static int hclk_set_rate(struct clk *clk, unsigned long rate)
 }
 
 static struct clk hclk = {
-	.name = "hclk",
 	.parent = &system_clk,
 	.get_rate = hclk_get_rate,
 	.round_rate = hclk_round_rate,
@@ -280,7 +275,6 @@ static int clk48m_set_rate(struct clk *clk, unsigned long rate)
 }
 
 static struct clk clk48m = {
-	.name = "CLK48M",
 	.parent = &system_clk,
 	.get_rate = clk48m_get_rate,
 	.round_rate = clk48m_round_rate,
@@ -400,21 +394,18 @@ static int perclk3_set_rate(struct clk *clk, unsigned long rate)
 
 static struct clk perclk[] = {
 	{
-		.name = "perclk",
 		.id = 0,
 		.parent = &system_clk,
 		.get_rate = perclk1_get_rate,
 		.round_rate = perclk1_round_rate,
 		.set_rate = perclk1_set_rate,
 	}, {
-		.name = "perclk",
 		.id = 1,
 		.parent = &system_clk,
 		.get_rate = perclk2_get_rate,
 		.round_rate = perclk2_round_rate,
 		.set_rate = perclk2_set_rate,
 	}, {
-		.name = "perclk",
 		.id = 2,
 		.parent = &system_clk,
 		.get_rate = perclk3_get_rate,
@@ -457,12 +448,10 @@ static int clko_set_parent(struct clk *clk, struct clk *parent)
 }
 
 static struct clk clko_clk = {
-	.name = "clko_clk",
 	.set_parent = clko_set_parent,
 };
 
 static struct clk dma_clk = {
-	.name = "dma",
 	.parent = &hclk,
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
@@ -473,7 +462,6 @@ static struct clk dma_clk = {
 };
 
 static struct clk csi_clk = {
-	.name = "csi_clk",
 	.parent = &hclk,
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
@@ -484,7 +472,6 @@ static struct clk csi_clk = {
 };
 
 static struct clk mma_clk = {
-	.name = "mma_clk",
 	.parent = &hclk,
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
@@ -495,7 +482,6 @@ static struct clk mma_clk = {
 };
 
 static struct clk usbd_clk = {
-	.name = "usbd_clk",
 	.parent = &clk48m,
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
@@ -506,99 +492,85 @@ static struct clk usbd_clk = {
 };
 
 static struct clk gpt_clk = {
-	.name = "gpt_clk",
 	.parent = &perclk[0],
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
 };
 
 static struct clk uart_clk = {
-	.name = "uart",
 	.parent = &perclk[0],
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
 };
 
 static struct clk i2c_clk = {
-	.name = "i2c_clk",
 	.parent = &hclk,
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
 };
 
 static struct clk spi_clk = {
-	.name = "spi_clk",
 	.parent = &perclk[1],
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
 };
 
 static struct clk sdhc_clk = {
-	.name = "sdhc_clk",
 	.parent = &perclk[1],
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
 };
 
 static struct clk lcdc_clk = {
-	.name = "lcdc_clk",
 	.parent = &perclk[1],
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
 };
 
 static struct clk mshc_clk = {
-	.name = "mshc_clk",
 	.parent = &hclk,
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
 };
 
 static struct clk ssi_clk = {
-	.name = "ssi_clk",
 	.parent = &perclk[2],
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
 };
 
 static struct clk rtc_clk = {
-	.name = "rtc_clk",
 	.parent = &clk32,
 };
 
-static struct clk *mxc_clks[] = {
-	&clk16m,
-	&clk32,
-	&clk32_premult,
-	&prem_clk,
-	&system_clk,
-	&mcu_clk,
-	&fclk,
-	&hclk,
-	&clk48m,
-	&perclk[0],
-	&perclk[1],
-	&perclk[2],
-	&clko_clk,
-	&dma_clk,
-	&csi_clk,
-	&mma_clk,
-	&usbd_clk,
-	&gpt_clk,
-	&uart_clk,
-	&i2c_clk,
-	&spi_clk,
-	&sdhc_clk,
-	&lcdc_clk,
-	&mshc_clk,
-	&ssi_clk,
-	&rtc_clk,
+#define _REGISTER_CLOCK(d, n, c) \
+	{ \
+		.dev_id = d, \
+		.con_id = n, \
+		.clk = &c, \
+	},
+static struct clk_lookup lookups[] __initdata = {
+	_REGISTER_CLOCK(NULL, "dma", dma_clk)
+	_REGISTER_CLOCK("mx1-camera.0", NULL, csi_clk)
+	_REGISTER_CLOCK(NULL, "mma", mma_clk)
+	_REGISTER_CLOCK("imx_udc.0", NULL, usbd_clk)
+	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
+	_REGISTER_CLOCK("imx-uart.0", NULL, uart_clk)
+	_REGISTER_CLOCK("imx-uart.1", NULL, uart_clk)
+	_REGISTER_CLOCK("imx-uart.2", NULL, uart_clk)
+	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
+	_REGISTER_CLOCK("spi_imx.0", NULL, spi_clk)
+	_REGISTER_CLOCK("imx-mmc.0", NULL, sdhc_clk)
+	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
+	_REGISTER_CLOCK(NULL, "mshc", mshc_clk)
+	_REGISTER_CLOCK(NULL, "ssi", ssi_clk)
+	_REGISTER_CLOCK("mxc_rtc.0", NULL, rtc_clk)
 };
 
 int __init mx1_clocks_init(unsigned long fref)
 {
-	struct clk **clkp;
 	unsigned int reg;
+	int i;
 
 	/* disable clocks we are able to */
 	__raw_writel(0, SCM_GCCR);
@@ -620,8 +592,8 @@ int __init mx1_clocks_init(unsigned long fref)
 	reg = (reg & CCM_CSCR_CLKO_MASK) >> CCM_CSCR_CLKO_OFFSET;
 	clko_clk.parent = (struct clk *)clko_clocks[reg];
 
-	for (clkp = mxc_clks; clkp < mxc_clks + ARRAY_SIZE(mxc_clks); clkp++)
-		clk_register(*clkp);
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
 
 	clk_enable(&hclk);
 	clk_enable(&fclk);
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 8986b741223..0617c19f85c 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -9,6 +9,7 @@ choice
 config ARCH_MX1
 	bool "MX1-based"
 	select CPU_ARM920T
+	select COMMON_CLKDEV
 	help
 	  This enables support for systems based on the Freescale i.MX1 family
 
-- 
cgit v1.2.3


From 5e63ff9a973a19b78bb0eef22df8946b36e09f0f Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Sat, 7 Feb 2009 13:37:29 +0100
Subject: [ARM] MXC: remove the now unused #ifndef CONFIG_COMMON_CLKDEV

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/clock.c | 154 ----------------------------------------------
 1 file changed, 154 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c
index f653213b741..9e8fbd57495 100644
--- a/arch/arm/plat-mxc/clock.c
+++ b/arch/arm/plat-mxc/clock.c
@@ -48,76 +48,6 @@ static DEFINE_MUTEX(clocks_mutex);
  * Standard clock functions defined in include/linux/clk.h
  *-------------------------------------------------------------------------*/
 
-/*
- * All the code inside #ifndef CONFIG_COMMON_CLKDEV can be removed once all
- * MXC architectures have switched to using clkdev.
- */
-#ifndef CONFIG_COMMON_CLKDEV
-/*
- * Retrieve a clock by name.
- *
- * Note that we first try to use device id on the bus
- * and clock name. If this fails, we try to use "<name>.<id>". If this fails,
- * we try to use clock name only.
- * The reference count to the clock's module owner ref count is incremented.
- */
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	struct clk *p, *clk = ERR_PTR(-ENOENT);
-	int idno;
-	const char *str;
-
-	if (id == NULL)
-		return clk;
-
-	if (dev == NULL || dev->bus != &platform_bus_type)
-		idno = -1;
-	else
-		idno = to_platform_device(dev)->id;
-
-	mutex_lock(&clocks_mutex);
-
-	list_for_each_entry(p, &clocks, node) {
-		if (p->id == idno &&
-		    strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
-			clk = p;
-			goto found;
-		}
-	}
-
-	str = strrchr(id, '.');
-	if (str) {
-		int cnt = str - id;
-		str++;
-		idno = simple_strtol(str, NULL, 10);
-		list_for_each_entry(p, &clocks, node) {
-			if (p->id == idno &&
-			    strlen(p->name) == cnt &&
-			    strncmp(id, p->name, cnt) == 0 &&
-			    try_module_get(p->owner)) {
-				clk = p;
-				goto found;
-			}
-		}
-	}
-
-	list_for_each_entry(p, &clocks, node) {
-		if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
-			clk = p;
-			goto found;
-		}
-	}
-
-	printk(KERN_WARNING "clk: Unable to get requested clock: %s\n", id);
-
-found:
-	mutex_unlock(&clocks_mutex);
-
-	return clk;
-}
-EXPORT_SYMBOL(clk_get);
-#endif
-
 static void __clk_disable(struct clk *clk)
 {
 	if (clk == NULL || IS_ERR(clk))
@@ -194,16 +124,6 @@ unsigned long clk_get_rate(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_rate);
 
-#ifndef CONFIG_COMMON_CLKDEV
-/* Decrement the clock's module reference count */
-void clk_put(struct clk *clk)
-{
-	if (clk && !IS_ERR(clk))
-		module_put(clk->owner);
-}
-EXPORT_SYMBOL(clk_put);
-#endif
-
 /* Round the requested clock rate to the nearest supported
  * rate that is less than or equal to the requested rate.
  * This is dependent on the clock's current parent.
@@ -266,80 +186,6 @@ struct clk *clk_get_parent(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_parent);
 
-#ifndef CONFIG_COMMON_CLKDEV
-/*
- * Add a new clock to the clock tree.
- */
-int clk_register(struct clk *clk)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return -EINVAL;
-
-	mutex_lock(&clocks_mutex);
-	list_add(&clk->node, &clocks);
-	mutex_unlock(&clocks_mutex);
-
-	return 0;
-}
-EXPORT_SYMBOL(clk_register);
-
-/* Remove a clock from the clock tree */
-void clk_unregister(struct clk *clk)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return;
-
-	mutex_lock(&clocks_mutex);
-	list_del(&clk->node);
-	mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL(clk_unregister);
-
-#ifdef CONFIG_PROC_FS
-static int mxc_clock_read_proc(char *page, char **start, off_t off,
-				int count, int *eof, void *data)
-{
-	struct clk *clkp;
-	char *p = page;
-	int len;
-
-	list_for_each_entry(clkp, &clocks, node) {
-		p += sprintf(p, "%s-%d:\t\t%lu, %d", clkp->name, clkp->id,
-				clk_get_rate(clkp), clkp->usecount);
-		if (clkp->parent)
-			p += sprintf(p, ", %s-%d\n", clkp->parent->name,
-				     clkp->parent->id);
-		else
-			p += sprintf(p, "\n");
-	}
-
-	len = (p - page) - off;
-	if (len < 0)
-		len = 0;
-
-	*eof = (len <= count) ? 1 : 0;
-	*start = page + off;
-
-	return len;
-}
-
-static int __init mxc_setup_proc_entry(void)
-{
-	struct proc_dir_entry *res;
-
-	res = create_proc_read_entry("cpu/clocks", 0, NULL,
-				     mxc_clock_read_proc, NULL);
-	if (!res) {
-		printk(KERN_ERR "Failed to create proc/cpu/clocks\n");
-		return -ENOMEM;
-	}
-	return 0;
-}
-
-late_initcall(mxc_setup_proc_entry);
-#endif /* CONFIG_PROC_FS */
-#endif
-
 /*
  * Get the resulting clock rate from a PLL register value and the input
  * frequency. PLLs with this register layout can at least be found on
-- 
cgit v1.2.3


From c13a482c43a148c2b8060b405fc39a4b214d56d2 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Thu, 25 Jun 2009 14:11:50 +0200
Subject: MX3: Add USB platform devices and resources

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/devices.c | 65 +++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-mx3/devices.h |  3 +++
 2 files changed, 68 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index 7a5c2ef52a4..4e728a29196 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -390,6 +390,71 @@ struct platform_device mxc_otg_udc_device = {
 	.num_resources	= ARRAY_SIZE(otg_resources),
 };
 
+/* OTG host */
+struct platform_device mxc_otg_host = {
+	.name = "mxc-ehci",
+	.id = 0,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+		.dma_mask = &otg_dmamask,
+	},
+	.resource = otg_resources,
+	.num_resources = ARRAY_SIZE(otg_resources),
+};
+
+/* USB host 1 */
+
+static u64 usbh1_dmamask = ~(u32)0;
+
+static struct resource mxc_usbh1_resources[] = {
+	{
+		.start = OTG_BASE_ADDR + 0x200,
+		.end = OTG_BASE_ADDR + 0x3ff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_USB1,
+		.end = MXC_INT_USB1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_usbh1 = {
+	.name = "mxc-ehci",
+	.id = 1,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+		.dma_mask = &usbh1_dmamask,
+	},
+	.resource = mxc_usbh1_resources,
+	.num_resources = ARRAY_SIZE(mxc_usbh1_resources),
+};
+
+/* USB host 2 */
+static u64 usbh2_dmamask = ~(u32)0;
+
+static struct resource mxc_usbh2_resources[] = {
+	{
+		.start = OTG_BASE_ADDR + 0x400,
+		.end = OTG_BASE_ADDR + 0x5ff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_USB2,
+		.end = MXC_INT_USB2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_usbh2 = {
+	.name = "mxc-ehci",
+	.id = 2,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+		.dma_mask = &usbh2_dmamask,
+	},
+	.resource = mxc_usbh2_resources,
+	.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
+};
+
 #ifdef CONFIG_ARCH_MX35
 static struct resource mxc_fec_resources[] = {
 	{
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index ffd494ddd4a..81614319755 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -16,5 +16,8 @@ extern struct platform_device mxc_fec_device;
 extern struct platform_device mxcsdhc_device0;
 extern struct platform_device mxcsdhc_device1;
 extern struct platform_device mxc_otg_udc_device;
+extern struct platform_device mxc_otg_host;
+extern struct platform_device mxc_usbh1;
+extern struct platform_device mxc_usbh2;
 extern struct platform_device mxc_rnga_device;
 
-- 
cgit v1.2.3


From 6558f985a1ff7ab2b413f49ee8766c919495e0ac Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 25 Jun 2009 14:11:51 +0200
Subject: ehci mxc: Fix clocks

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/clock.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 25b6f55bfb0..2b29491c22b 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -532,6 +532,12 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("ipu-core", NULL, ipu_clk)
 	_REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk)
 	_REGISTER_CLOCK(NULL, "kpp", kpp_clk)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk2)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk2)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk2)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk1)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk2)
 	_REGISTER_CLOCK("mx3-camera.0", NULL, csi_clk)
-- 
cgit v1.2.3


From 88e29a8d21fb9687ad6972a44571b295acaf0d74 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Thu, 25 Jun 2009 14:11:52 +0200
Subject: MX3: add additional USB pins to iomux

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/iomux-mx3.h | 13 +++++++++++++
 1 file changed, 13 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index 2eb182f7387..a3b206ce78b 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -635,6 +635,19 @@ enum iomux_pins {
 #define MX31_PIN_USBOTG_DIR__USBOTG_DIR        IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBOTG_NXT__USBOTG_NXT        IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBOTG_STP__USBOTG_STP        IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI1_MOSI__USBH1_RXDM        IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_MISO__USBH1_RXDP        IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SS0__USBH1_TXDM         IOMUX_MODE(MX31_PIN_CSPI1_SS0,  IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SS1__USBH1_TXDP         IOMUX_MODE(MX31_PIN_CSPI1_SS1,  IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SS2__USBH1_RCV          IOMUX_MODE(MX31_PIN_CSPI1_SS2,  IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SCLK__USBH1_OEB         IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SPI_RDY__USBH1_FS       IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_USBH2_DATA0__USBH2_DATA0      IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_DATA1__USBH2_DATA1      IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_CLK__USBH2_CLK          IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_DIR__USBH2_DIR          IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_NXT__USBH2_NXT          IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_STP__USBH2_STP          IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USB_OC__GPIO1_30	IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_I2C_DAT__I2C1_SDA	IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_I2C_CLK__I2C1_SCL	IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
-- 
cgit v1.2.3


From 627fb3b9d260cb413d0ea2d179e319a20e2bd82b Mon Sep 17 00:00:00 2001
From: javier Martin <javier.martin@vista-silicon.com>
Date: Wed, 15 Jul 2009 15:26:21 +0200
Subject: MX27: Add USB platform devices and resources

This adds clocks and resources for usb in i.mx27 SoC.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/clock_imx27.c |  9 +++-
 arch/arm/mach-mx2/devices.c     | 92 +++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-mx2/devices.h     |  4 ++
 3 files changed, 104 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index a0c577f80d4..4089951acb4 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -643,7 +643,14 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "cspi3", cspi3_clk)
 	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
 	_REGISTER_CLOCK(NULL, "csi", csi_clk)
-	_REGISTER_CLOCK(NULL, "usb", usb_clk)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk1)
 	_REGISTER_CLOCK(NULL, "ssi1", ssi1_clk)
 	_REGISTER_CLOCK(NULL, "ssi2", ssi2_clk)
 	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index cbf42467466..4ecf0977beb 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -369,6 +369,98 @@ struct platform_device mxc_sdhc_device1 = {
        .resource       = mxc_sdhc2_resources,
 };
 
+static struct resource otg_resources[] = {
+	{
+		.start	= OTG_BASE_ADDR,
+		.end	= OTG_BASE_ADDR + 0x1ff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= MXC_INT_USB3,
+		.end	= MXC_INT_USB3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 otg_dmamask = 0xffffffffUL;
+
+/* OTG gadget device */
+struct platform_device mxc_otg_udc_device = {
+	.name		= "fsl-usb2-udc",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &otg_dmamask,
+		.coherent_dma_mask	= 0xffffffffUL,
+	},
+	.resource	= otg_resources,
+	.num_resources	= ARRAY_SIZE(otg_resources),
+};
+
+/* OTG host */
+struct platform_device mxc_otg_host = {
+	.name = "mxc-ehci",
+	.id = 0,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+		.dma_mask = &otg_dmamask,
+	},
+	.resource = otg_resources,
+	.num_resources = ARRAY_SIZE(otg_resources),
+};
+
+/* USB host 1 */
+
+static u64 usbh1_dmamask = 0xffffffffUL;
+
+static struct resource mxc_usbh1_resources[] = {
+	{
+		.start = OTG_BASE_ADDR + 0x200,
+		.end = OTG_BASE_ADDR + 0x3ff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_USB1,
+		.end = MXC_INT_USB1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_usbh1 = {
+	.name = "mxc-ehci",
+	.id = 1,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+		.dma_mask = &usbh1_dmamask,
+	},
+	.resource = mxc_usbh1_resources,
+	.num_resources = ARRAY_SIZE(mxc_usbh1_resources),
+};
+
+/* USB host 2 */
+static u64 usbh2_dmamask = 0xffffffffUL;
+
+static struct resource mxc_usbh2_resources[] = {
+	{
+		.start = OTG_BASE_ADDR + 0x400,
+		.end = OTG_BASE_ADDR + 0x5ff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_USB2,
+		.end = MXC_INT_USB2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_usbh2 = {
+	.name = "mxc-ehci",
+	.id = 2,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+		.dma_mask = &usbh2_dmamask,
+	},
+	.resource = mxc_usbh2_resources,
+	.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
+};
+
+
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
 	{
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h
index c79ba7fed1b..6e91b4e3509 100644
--- a/arch/arm/mach-mx2/devices.h
+++ b/arch/arm/mach-mx2/devices.h
@@ -19,3 +19,7 @@ extern struct platform_device mxc_i2c_device0;
 extern struct platform_device mxc_i2c_device1;
 extern struct platform_device mxc_sdhc_device0;
 extern struct platform_device mxc_sdhc_device1;
+extern struct platform_device mxc_otg_udc_device;
+extern struct platform_device mxc_otg_host;
+extern struct platform_device mxc_usbh1;
+extern struct platform_device mxc_usbh2;
-- 
cgit v1.2.3


From af5b1df7136570dae9ac4c1cd193053c61b0ed8f Mon Sep 17 00:00:00 2001
From: Eric Benard <eric@eukrea.com>
Date: Thu, 16 Jul 2009 16:26:33 +0200
Subject: Add support for Eukrea's CPUIMX27

CPUIMX27 is built around Freescale's i.MX27 and has up to 64MB of
 NOR Flash, up to 512MB of NAND Flash and up to 256MB of mDDR,
 it includes an ethernet PHY in MII mode, an I2C RTC and a
 ST16554 QuadUART on nCS3.

Signed-off-by: Eric Benard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/Kconfig                          |  14 ++
 arch/arm/mach-mx2/Makefile                         |   2 +-
 arch/arm/mach-mx2/eukrea_cpuimx27.c                | 235 +++++++++++++++++++++
 .../plat-mxc/include/mach/board-eukrea_cpuimx27.h  |  25 +++
 4 files changed, 275 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-mx2/eukrea_cpuimx27.c
 create mode 100644 arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
index c77da586b71..2c2be3953d8 100644
--- a/arch/arm/mach-mx2/Kconfig
+++ b/arch/arm/mach-mx2/Kconfig
@@ -53,6 +53,20 @@ config MACH_PCM970_BASEBOARD
 
 endchoice
 
+config MACH_EUKREA_CPUIMX27
+	bool "Eukrea CPUIMX27 module"
+	depends on MACH_MX27
+	help
+	  Include support for Eukrea CPUIMX27 platform. This includes
+	  specific configurations for the module and its peripherals.
+
+config MACH_EUKREA_CPUIMX27_USESDHC2
+	bool "CPUIMX27 integrates SDHC2 module"
+	depends on MACH_EUKREA_CPUIMX27
+	help
+	  This adds support for the internal SDHC2 used on CPUIMX27 used
+	  for wifi or eMMC.
+
 config MACH_MX27_3DS
 	bool "MX27PDK platform"
 	depends on MACH_MX27
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
index b9b1cca4e9b..e12490f670d 100644
--- a/arch/arm/mach-mx2/Makefile
+++ b/arch/arm/mach-mx2/Makefile
@@ -17,4 +17,4 @@ obj-$(CONFIG_MACH_PCM038) += pcm038.o
 obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
 obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o
 obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o
-
+obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o
diff --git a/arch/arm/mach-mx2/eukrea_cpuimx27.c b/arch/arm/mach-mx2/eukrea_cpuimx27.c
new file mode 100644
index 00000000000..a2c4181892c
--- /dev/null
+++ b/arch/arm/mach-mx2/eukrea_cpuimx27.c
@@ -0,0 +1,235 @@
+/*
+ * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm038.c which is :
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/board-eukrea_cpuimx27.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/i2c.h>
+#include <mach/iomux.h>
+#include <mach/imx-uart.h>
+#include <mach/mxc_nand.h>
+
+#include "devices.h"
+
+static int eukrea_cpuimx27_pins[] = {
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* UART4 */
+	PB26_AF_UART4_RTS,
+	PB28_AF_UART4_TXD,
+	PB29_AF_UART4_CTS,
+	PB31_AF_UART4_RXD,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* I2C1 */
+	PD17_PF_I2C_DATA,
+	PD18_PF_I2C_CLK,
+	/* SDHC2 */
+	PB4_PF_SD2_D0,
+	PB5_PF_SD2_D1,
+	PB6_PF_SD2_D2,
+	PB7_PF_SD2_D3,
+	PB8_PF_SD2_CMD,
+	PB9_PF_SD2_CLK,
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+	/* Quad UART's IRQ */
+	GPIO_PORTD | 22 | GPIO_GPIO | GPIO_IN,
+	GPIO_PORTD | 23 | GPIO_GPIO | GPIO_IN,
+	GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN,
+	GPIO_PORTD | 30 | GPIO_GPIO | GPIO_IN,
+#endif
+};
+
+static struct physmap_flash_data eukrea_cpuimx27_flash_data = {
+	.width = 2,
+};
+
+static struct resource eukrea_cpuimx27_flash_resource = {
+	.start = 0xc0000000,
+	.end   = 0xc3ffffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device eukrea_cpuimx27_nor_mtd_device = {
+	.name = "physmap-flash",
+	.id = 0,
+	.dev = {
+		.platform_data = &eukrea_cpuimx27_flash_data,
+	},
+	.num_resources = 1,
+	.resource = &eukrea_cpuimx27_flash_resource,
+};
+
+static struct imxuart_platform_data uart_pdata[] = {
+	{
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	},
+};
+
+static struct mxc_nand_platform_data eukrea_cpuimx27_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&eukrea_cpuimx27_nor_mtd_device,
+	&mxc_fec_device,
+};
+
+static struct imxi2c_platform_data eukrea_cpuimx27_i2c_1_data = {
+	.bitrate = 100000,
+};
+
+static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+		.type = "pcf8563"
+	},
+};
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+static struct plat_serial8250_port serial_platform_data[] = {
+	{
+		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x200000),
+		.irq = IRQ_GPIOB(23),
+		.uartclk = 14745600,
+		.regshift = 1,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x400000),
+		.irq = IRQ_GPIOB(22),
+		.uartclk = 14745600,
+		.regshift = 1,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x800000),
+		.irq = IRQ_GPIOB(27),
+		.uartclk = 14745600,
+		.regshift = 1,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x1000000),
+		.irq = IRQ_GPIOB(30),
+		.uartclk = 14745600,
+		.regshift = 1,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+	}
+};
+
+static struct platform_device serial_device = {
+	.name = "serial8250",
+	.id = 0,
+	.dev = {
+		.platform_data = serial_platform_data,
+	},
+};
+#endif
+
+static void __init eukrea_cpuimx27_init(void)
+{
+	mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins,
+		ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27");
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
+
+	mxc_register_device(&mxc_nand_device, &eukrea_cpuimx27_nand_board_info);
+
+	i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
+				ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
+
+	mxc_register_device(&mxc_i2c_device0, &eukrea_cpuimx27_i2c_1_data);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
+	/* SDHC2 can be used for Wifi */
+	mxc_register_device(&mxc_sdhc_device1, NULL);
+	/* in which case UART4 is also used for Bluetooth */
+	mxc_register_device(&mxc_uart_device3, &uart_pdata[1]);
+#endif
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+	platform_device_register(&serial_device);
+#endif
+
+#ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD
+	eukrea_mbimx27_baseboard_init();
+#endif
+}
+
+static void __init eukrea_cpuimx27_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer eukrea_cpuimx27_timer = {
+	.init = eukrea_cpuimx27_timer_init,
+};
+
+MACHINE_START(CPUIMX27, "EUKREA CPUIMX27")
+	.phys_io        = AIPI_BASE_ADDR,
+	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx27_map_io,
+	.init_irq       = mx27_init_irq,
+	.init_machine   = eukrea_cpuimx27_init,
+	.timer          = &eukrea_cpuimx27_timer,
+MACHINE_END
diff --git a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h
new file mode 100644
index 00000000000..91bcce65469
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * Based on board-pcm038.h which is :
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__
+#define __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__
+
+#endif /* __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__ */
-- 
cgit v1.2.3


From a961bf380b93741c2191f8efc8f5f1c65224b216 Mon Sep 17 00:00:00 2001
From: Eric Benard <eric@eukrea.com>
Date: Thu, 16 Jul 2009 16:26:34 +0200
Subject: Add support for Eukrea's MBIMX27

MBIMX27 is the evaluation board for CPUIMX27 and integrates : a
QVGA TFT, a SPI touchscreen controler, a SDCard connector wired to
SDHC1.

Signed-off-by: Eric Benard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/Kconfig                          |  14 ++
 arch/arm/mach-mx2/Makefile                         |   1 +
 arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c       | 249 +++++++++++++++++++++
 .../plat-mxc/include/mach/board-eukrea_cpuimx27.h  |  15 ++
 4 files changed, 279 insertions(+)
 create mode 100644 arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
index 2c2be3953d8..0c28a37bc14 100644
--- a/arch/arm/mach-mx2/Kconfig
+++ b/arch/arm/mach-mx2/Kconfig
@@ -67,6 +67,20 @@ config MACH_EUKREA_CPUIMX27_USESDHC2
 	  This adds support for the internal SDHC2 used on CPUIMX27 used
 	  for wifi or eMMC.
 
+choice
+	prompt "Baseboard"
+	depends on MACH_EUKREA_CPUIMX27
+	default MACH_EUKREA_MBIMX27_BASEBOARD
+
+config MACH_EUKREA_MBIMX27_BASEBOARD
+	prompt "Eukrea MBIMX27 development board"
+	bool
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMX27 evaluation board.
+
+endchoice
+
 config MACH_MX27_3DS
 	bool "MX27PDK platform"
 	depends on MACH_MX27
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
index e12490f670d..8b6846c4226 100644
--- a/arch/arm/mach-mx2/Makefile
+++ b/arch/arm/mach-mx2/Makefile
@@ -18,3 +18,4 @@ obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
 obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o
 obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o
+obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
diff --git a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
new file mode 100644
index 00000000000..7382b6d27ee
--- /dev/null
+++ b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
@@ -0,0 +1,249 @@
+/*
+ * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm970-baseboard.c which is :
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/iomux.h>
+#include <mach/imxfb.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
+#include <mach/imx-uart.h>
+
+#include "devices.h"
+
+static int eukrea_mbimx27_pins[] = {
+	/* UART2 */
+	PE3_PF_UART2_CTS,
+	PE4_PF_UART2_RTS,
+	PE6_PF_UART2_TXD,
+	PE7_PF_UART2_RXD,
+	/* UART3 */
+	PE8_PF_UART3_TXD,
+	PE9_PF_UART3_RXD,
+	PE10_PF_UART3_CTS,
+	PE11_PF_UART3_RTS,
+	/* UART4 */
+	PB26_AF_UART4_RTS,
+	PB28_AF_UART4_TXD,
+	PB29_AF_UART4_CTS,
+	PB31_AF_UART4_RXD,
+	/* SDHC1*/
+	PE18_PF_SD1_D0,
+	PE19_PF_SD1_D1,
+	PE20_PF_SD1_D2,
+	PE21_PF_SD1_D3,
+	PE22_PF_SD1_CMD,
+	PE23_PF_SD1_CLK,
+	/* display */
+	PA5_PF_LSCLK,
+	PA6_PF_LD0,
+	PA7_PF_LD1,
+	PA8_PF_LD2,
+	PA9_PF_LD3,
+	PA10_PF_LD4,
+	PA11_PF_LD5,
+	PA12_PF_LD6,
+	PA13_PF_LD7,
+	PA14_PF_LD8,
+	PA15_PF_LD9,
+	PA16_PF_LD10,
+	PA17_PF_LD11,
+	PA18_PF_LD12,
+	PA19_PF_LD13,
+	PA20_PF_LD14,
+	PA21_PF_LD15,
+	PA22_PF_LD16,
+	PA23_PF_LD17,
+	PA28_PF_HSYNC,
+	PA29_PF_VSYNC,
+	PA30_PF_CONTRAST,
+	PA31_PF_OE_ACD,
+	/* SPI1 */
+	PD28_PF_CSPI1_SS0,
+	PD29_PF_CSPI1_SCLK,
+	PD30_PF_CSPI1_MISO,
+	PD31_PF_CSPI1_MOSI,
+};
+
+static struct gpio_led gpio_leds[] = {
+	{
+		.name			= "led1",
+		.default_trigger	= "heartbeat",
+		.active_low		= 1,
+		.gpio			= GPIO_PORTF | 16,
+	},
+	{
+		.name			= "led2",
+		.default_trigger	= "none",
+		.active_low		= 1,
+		.gpio			= GPIO_PORTF | 19,
+	},
+	{
+		.name			= "backlight",
+		.default_trigger	= "backlight",
+		.active_low		= 0,
+		.gpio			= GPIO_PORTE | 5,
+	},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_led_info,
+	},
+};
+
+static struct imx_fb_videomode eukrea_mbimx27_modes[] = {
+	{
+		.mode = {
+			.name		= "CMO-QGVA",
+			.refresh	= 60,
+			.xres		= 320,
+			.yres		= 240,
+			.pixclock	= 156000,
+			.hsync_len	= 30,
+			.left_margin	= 38,
+			.right_margin	= 20,
+			.vsync_len	= 3,
+			.upper_margin	= 15,
+			.lower_margin	= 4,
+		},
+		.pcr		= 0xFAD08B80,
+		.bpp		= 16,
+	},
+};
+
+static struct imx_fb_platform_data eukrea_mbimx27_fb_data = {
+	.mode = eukrea_mbimx27_modes,
+	.num_modes = ARRAY_SIZE(eukrea_mbimx27_modes),
+
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00040060,
+};
+
+static struct imxuart_platform_data uart_pdata[] = {
+	{
+		.flags = IMXUART_HAVE_RTSCTS,
+	},
+	{
+		.flags = IMXUART_HAVE_RTSCTS,
+	},
+};
+
+#if defined(CONFIG_TOUCHSCREEN_ADS7846)
+	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+
+#define ADS7846_PENDOWN (GPIO_PORTD | 25)
+
+static void ads7846_dev_init(void)
+{
+	if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) {
+		printk(KERN_ERR "can't get ads746 pen down GPIO\n");
+		return;
+	}
+
+	gpio_direction_input(ADS7846_PENDOWN);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+	return !gpio_get_value(ADS7846_PENDOWN);
+}
+
+static struct ads7846_platform_data ads7846_config __initdata = {
+	.get_pendown_state	= ads7846_get_pendown_state,
+	.keep_vref_on		= 1,
+};
+
+static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = {
+	[0] = {
+		.modalias	= "ads7846",
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.max_speed_hz	= 1500000,
+		.irq		= IRQ_GPIOD(25),
+		.platform_data	= &ads7846_config,
+		.mode           = SPI_MODE_2,
+	},
+};
+
+static int eukrea_mbimx27_spi_cs[] = {GPIO_PORTD | 28};
+
+static struct spi_imx_master eukrea_mbimx27_spi_0_data = {
+	.chipselect	= eukrea_mbimx27_spi_cs,
+	.num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
+};
+#endif
+
+static struct platform_device *platform_devices[] __initdata = {
+	&leds_gpio,
+};
+
+/*
+ * system init for baseboard usage. Will be called by cpuimx27 init.
+ *
+ * Add platform devices present on this baseboard and init
+ * them from CPU side as far as required to use them later on
+ */
+void __init eukrea_mbimx27_baseboard_init(void)
+{
+	mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins,
+		ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27");
+
+	mxc_register_device(&mxc_uart_device1, &uart_pdata[0]);
+	mxc_register_device(&mxc_uart_device2, &uart_pdata[1]);
+
+	mxc_register_device(&mxc_fb_device, &eukrea_mbimx27_fb_data);
+	mxc_register_device(&mxc_sdhc_device0, NULL);
+
+#if defined(CONFIG_TOUCHSCREEN_ADS7846)
+	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+	/* SPI and ADS7846 Touchscreen controler init */
+	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+	mxc_gpio_mode(GPIO_PORTD | 25 | GPIO_GPIO | GPIO_IN);
+	mxc_register_device(&mxc_spi_device0, &eukrea_mbimx27_spi_0_data);
+	spi_register_board_info(eukrea_mbimx27_spi_board_info,
+			ARRAY_SIZE(eukrea_mbimx27_spi_board_info));
+	ads7846_dev_init();
+#endif
+
+	/* Leds configuration */
+	mxc_gpio_mode(GPIO_PORTF | 16 | GPIO_GPIO | GPIO_OUT);
+	mxc_gpio_mode(GPIO_PORTF | 19 | GPIO_GPIO | GPIO_OUT);
+	/* Backlight */
+	mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_OUT);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
diff --git a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h
index 91bcce65469..a1fd5830af4 100644
--- a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h
+++ b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h
@@ -22,4 +22,19 @@
 #ifndef __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__
 #define __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__
 
+#ifndef __ASSEMBLY__
+/*
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls baseboard's init function.
+ * TODO: Add your own baseboard init function and call it from
+ * inside eukrea_cpuimx27_init().
+ *
+ * This example here is for the development board. Refer
+ * eukrea_mbimx27-baseboard.c
+ */
+
+extern void eukrea_mbimx27_baseboard_init(void);
+
+#endif
+
 #endif /* __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__ */
-- 
cgit v1.2.3


From 4a15235e79f5160a34100b362af2c674d191d0a5 Mon Sep 17 00:00:00 2001
From: Wan ZongShun <mcuos.com@gmail.com>
Date: Sun, 9 Aug 2009 21:22:22 -0700
Subject: Input: add keypad driver for w90p910

Add keypad driver for the 4x4 keypad on an evaluation board based
on w90p910.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Reviewed-by: Trilok Soni <soni.trilok@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 arch/arm/mach-w90x900/include/mach/w90p910_keypad.h | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
 create mode 100644 arch/arm/mach-w90x900/include/mach/w90p910_keypad.h

(limited to 'arch/arm')

diff --git a/arch/arm/mach-w90x900/include/mach/w90p910_keypad.h b/arch/arm/mach-w90x900/include/mach/w90p910_keypad.h
new file mode 100644
index 00000000000..79462faaa18
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/w90p910_keypad.h
@@ -0,0 +1,18 @@
+#ifndef __ASM_ARCH_W90P910_KEYPAD_H
+#define __ASM_ARCH_W90P910_KEYPAD_H
+
+#include <linux/input/matrix_keypad.h>
+
+extern void mfp_set_groupi(struct device *dev);
+
+struct w90p910_keypad_platform_data {
+
+	unsigned int	prescale;
+	unsigned int	debounce;
+	unsigned int	matrix_key_rows;
+	unsigned int	matrix_key_cols;
+	unsigned int	*matrix_key_map;
+	int		matrix_key_map_size;
+};
+
+#endif /* __ASM_ARCH_W90P910_KEYPAD_H */
-- 
cgit v1.2.3


From 09113aea553cfaf074fd669cd0465daac4cea6e8 Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Sun, 9 Aug 2009 21:22:22 -0700
Subject: Input: w90p910_keypad - adjust to use definitions from
 matrix_keypad.h

Also have the driver send MSC_SCAN events as most keyboards do to aid
in updating keymap from userspace.

Tested-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 arch/arm/mach-w90x900/include/mach/w90p910_keypad.h | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-w90x900/include/mach/w90p910_keypad.h b/arch/arm/mach-w90x900/include/mach/w90p910_keypad.h
index 79462faaa18..556778e8dda 100644
--- a/arch/arm/mach-w90x900/include/mach/w90p910_keypad.h
+++ b/arch/arm/mach-w90x900/include/mach/w90p910_keypad.h
@@ -6,13 +6,10 @@
 extern void mfp_set_groupi(struct device *dev);
 
 struct w90p910_keypad_platform_data {
+	const struct matrix_keymap_data *keymap_data;
 
 	unsigned int	prescale;
 	unsigned int	debounce;
-	unsigned int	matrix_key_rows;
-	unsigned int	matrix_key_cols;
-	unsigned int	*matrix_key_map;
-	int		matrix_key_map_size;
 };
 
 #endif /* __ASM_ARCH_W90P910_KEYPAD_H */
-- 
cgit v1.2.3


From 8f2208601f81b505710b0d13dbd80b687ccbca60 Mon Sep 17 00:00:00 2001
From: Simon Guinot <sguinot@lacie.com>
Date: Mon, 22 Jun 2009 21:45:01 +0200
Subject: [ARM] orion5x: Add LaCie NAS d2Network support

This patch add support for the d2 Network and the Big Disk Network
LaCie boards.

Signed-off-by: Simon Guinot <sguinot@lacie.com>
Acked-by: Christopher Moore <moore@free.fr>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-orion5x/Kconfig       |  14 ++
 arch/arm/mach-orion5x/Makefile      |   2 +
 arch/arm/mach-orion5x/d2net-setup.c | 365 ++++++++++++++++++++++++++++++++++++
 3 files changed, 381 insertions(+)
 create mode 100644 arch/arm/mach-orion5x/d2net-setup.c

(limited to 'arch/arm')

diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index 2c7035d8dcb..5062b05b76b 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -89,6 +89,20 @@ config MACH_EDMINI_V2
 	  Say 'Y' here if you want your kernel to support the
 	  LaCie Ethernet Disk mini V2.
 
+config MACH_D2NET
+	bool "LaCie d2 Network"
+	select I2C_BOARDINFO
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  LaCie d2 Network NAS.
+
+config MACH_BIGDISK
+	bool "LaCie Big Disk Network"
+	select I2C_BOARDINFO
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  LaCie Big Disk Network NAS.
+
 config MACH_MSS2
 	bool "Maxtor Shared Storage II"
 	help
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index edc38e2c856..1db8a3a2708 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -12,6 +12,8 @@ obj-$(CONFIG_MACH_WRT350N_V2)	+= wrt350n-v2-setup.o
 obj-$(CONFIG_MACH_TS78XX)	+= ts78xx-setup.o
 obj-$(CONFIG_MACH_MV2120)	+= mv2120-setup.o
 obj-$(CONFIG_MACH_EDMINI_V2)	+= edmini_v2-setup.o
+obj-$(CONFIG_MACH_D2NET)	+= d2net-setup.o
+obj-$(CONFIG_MACH_BIGDISK)	+= d2net-setup.o
 obj-$(CONFIG_MACH_MSS2)		+= mss2-setup.o
 obj-$(CONFIG_MACH_WNR854T)	+= wnr854t-setup.o
 obj-$(CONFIG_MACH_RD88F5181L_GE)	+= rd88f5181l-ge-setup.o
diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
new file mode 100644
index 00000000000..9d4bf763f25
--- /dev/null
+++ b/arch/arm/mach-orion5x/d2net-setup.c
@@ -0,0 +1,365 @@
+/*
+ * arch/arm/mach-orion5x/d2net-setup.c
+ *
+ * LaCie d2Network and Big Disk Network NAS setup
+ *
+ * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * LaCie d2 Network Info
+ ****************************************************************************/
+
+/*
+ * 512KB NOR flash Device bus boot chip select
+ */
+
+#define D2NET_NOR_BOOT_BASE		0xfff80000
+#define D2NET_NOR_BOOT_SIZE		SZ_512K
+
+/*****************************************************************************
+ * 512KB NOR Flash on Boot Device
+ ****************************************************************************/
+
+/*
+ * TODO: Check write support on flash MX29LV400CBTC-70G
+ */
+
+static struct mtd_partition d2net_partitions[] = {
+	{
+		.name		= "Full512kb",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= 0,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+};
+
+static struct physmap_flash_data d2net_nor_flash_data = {
+	.width		= 1,
+	.parts		= d2net_partitions,
+	.nr_parts	= ARRAY_SIZE(d2net_partitions),
+};
+
+static struct resource d2net_nor_flash_resource = {
+	.flags			= IORESOURCE_MEM,
+	.start			= D2NET_NOR_BOOT_BASE,
+	.end			= D2NET_NOR_BOOT_BASE
+					+ D2NET_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device d2net_nor_flash = {
+	.name			= "physmap-flash",
+	.id			= 0,
+	.dev		= {
+		.platform_data	= &d2net_nor_flash_data,
+	},
+	.num_resources		= 1,
+	.resource		= &d2net_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data d2net_eth_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+/*****************************************************************************
+ * I2C devices
+ ****************************************************************************/
+
+/*
+ * i2c addr | chip         | description
+ * 0x32     | Ricoh 5C372b | RTC
+ * 0x3e     | GMT G762     | PWM fan controller
+ * 0x50     | HT24LC08     | eeprom (1kB)
+ *
+ * TODO: Add G762 support to the g760a driver.
+ */
+static struct i2c_board_info __initdata d2net_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("rs5c372b", 0x32),
+	}, {
+		I2C_BOARD_INFO("24c08", 0x50),
+	},
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+
+static struct mv_sata_platform_data d2net_sata_data = {
+	.n_ports	= 2,
+};
+
+#define D2NET_GPIO_SATA0_POWER	3
+#define D2NET_GPIO_SATA1_POWER	12
+
+static void __init d2net_sata_power_init(void)
+{
+	int err;
+
+	err = gpio_request(D2NET_GPIO_SATA0_POWER, "SATA0 power");
+	if (err == 0) {
+		err = gpio_direction_output(D2NET_GPIO_SATA0_POWER, 1);
+		if (err)
+			gpio_free(D2NET_GPIO_SATA0_POWER);
+	}
+	if (err)
+		pr_err("d2net: failed to configure SATA0 power GPIO\n");
+
+	err = gpio_request(D2NET_GPIO_SATA1_POWER, "SATA1 power");
+	if (err == 0) {
+		err = gpio_direction_output(D2NET_GPIO_SATA1_POWER, 1);
+		if (err)
+			gpio_free(D2NET_GPIO_SATA1_POWER);
+	}
+	if (err)
+		pr_err("d2net: failed to configure SATA1 power GPIO\n");
+}
+
+/*****************************************************************************
+ * GPIO LED's
+ ****************************************************************************/
+
+/*
+ * The blue front LED is wired to the CPLD and can blink in relation with the
+ * SATA activity. This feature is disabled to make this LED compatible with
+ * the leds-gpio driver: MPP14 and MPP15 are configured to act like output
+ * GPIO's and have to stay in an active state. This is needed to set the blue
+ * LED in a "fix on" state regardless of the SATA activity.
+ *
+ * The following array detail the different LED registers and the combination
+ * of their possible values:
+ *
+ * led_off   | blink_ctrl | SATA active | LED state
+ *           |            |             |
+ *    1      |     x      |      x      |  off
+ *    0      |     0      |      0      |  off
+ *    0      |     1      |      0      |  blink (rate 300ms)
+ *    0      |     x      |      1      |  on
+ *
+ * Notes: The blue and the red front LED's can't be on at the same time.
+ *        Red LED have priority.
+ */
+
+#define D2NET_GPIO_RED_LED		6
+#define D2NET_GPIO_BLUE_LED_BLINK_CTRL	16
+#define D2NET_GPIO_BLUE_LED_OFF		23
+#define D2NET_GPIO_SATA0_ACT		14
+#define D2NET_GPIO_SATA1_ACT		15
+
+static struct gpio_led d2net_leds[] = {
+	{
+		.name = "d2net:blue:power",
+		.gpio = D2NET_GPIO_BLUE_LED_OFF,
+		.active_low = 1,
+	},
+	{
+		.name = "d2net:red:fail",
+		.gpio = D2NET_GPIO_RED_LED,
+	},
+};
+
+static struct gpio_led_platform_data d2net_led_data = {
+	.num_leds = ARRAY_SIZE(d2net_leds),
+	.leds = d2net_leds,
+};
+
+static struct platform_device d2net_gpio_leds = {
+	.name           = "leds-gpio",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &d2net_led_data,
+	},
+};
+
+static void __init d2net_gpio_leds_init(void)
+{
+	/* Configure GPIO over MPP max number. */
+	orion_gpio_set_valid(D2NET_GPIO_BLUE_LED_OFF, 1);
+
+	if (gpio_request(D2NET_GPIO_SATA0_ACT, "LED SATA0 activity") != 0)
+		return;
+	if (gpio_direction_output(D2NET_GPIO_SATA0_ACT, 1) != 0)
+		goto err_free_1;
+	if (gpio_request(D2NET_GPIO_SATA1_ACT, "LED SATA1 activity") != 0)
+		goto err_free_1;
+	if (gpio_direction_output(D2NET_GPIO_SATA1_ACT, 1) != 0)
+		goto err_free_2;
+	platform_device_register(&d2net_gpio_leds);
+	return;
+
+err_free_2:
+	gpio_free(D2NET_GPIO_SATA1_ACT);
+err_free_1:
+	gpio_free(D2NET_GPIO_SATA0_ACT);
+	return;
+}
+
+/****************************************************************************
+ * GPIO keys
+ ****************************************************************************/
+
+#define D2NET_GPIO_PUSH_BUTTON		18
+#define D2NET_GPIO_POWER_SWITCH_ON	8
+#define D2NET_GPIO_POWER_SWITCH_OFF	9
+
+#define D2NET_SWITCH_POWER_ON		0x1
+#define D2NET_SWITCH_POWER_OFF		0x2
+
+static struct gpio_keys_button d2net_buttons[] = {
+	{
+		.type		= EV_SW,
+		.code		= D2NET_SWITCH_POWER_OFF,
+		.gpio		= D2NET_GPIO_POWER_SWITCH_OFF,
+		.desc		= "Power rocker switch (auto|off)",
+		.active_low	= 0,
+	},
+	{
+		.type		= EV_SW,
+		.code		= D2NET_SWITCH_POWER_ON,
+		.gpio		= D2NET_GPIO_POWER_SWITCH_ON,
+		.desc		= "Power rocker switch (on|auto)",
+		.active_low	= 0,
+	},
+	{
+		.type		= EV_KEY,
+		.code		= KEY_POWER,
+		.gpio		= D2NET_GPIO_PUSH_BUTTON,
+		.desc		= "Front Push Button",
+		.active_low	= 0,
+	},
+};
+
+static struct gpio_keys_platform_data d2net_button_data = {
+	.buttons	= d2net_buttons,
+	.nbuttons	= ARRAY_SIZE(d2net_buttons),
+};
+
+static struct platform_device d2net_gpio_buttons = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &d2net_button_data,
+	},
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static struct orion5x_mpp_mode d2net_mpp_modes[] __initdata = {
+	{  0, MPP_GPIO },	/* Board ID (bit 0) */
+	{  1, MPP_GPIO },	/* Board ID (bit 1) */
+	{  2, MPP_GPIO },	/* Board ID (bit 2) */
+	{  3, MPP_GPIO },	/* SATA 0 power */
+	{  4, MPP_UNUSED },
+	{  5, MPP_GPIO },	/* Fan fail detection */
+	{  6, MPP_GPIO },	/* Red front LED */
+	{  7, MPP_UNUSED },
+	{  8, MPP_GPIO },	/* Rear power switch (on|auto) */
+	{  9, MPP_GPIO },	/* Rear power switch (auto|off) */
+	{ 10, MPP_UNUSED },
+	{ 11, MPP_UNUSED },
+	{ 12, MPP_GPIO },	/* SATA 1 power */
+	{ 13, MPP_UNUSED },
+	{ 14, MPP_GPIO },	/* SATA 0 active */
+	{ 15, MPP_GPIO },	/* SATA 1 active */
+	{ 16, MPP_GPIO },	/* Blue front LED blink control */
+	{ 17, MPP_UNUSED },
+	{ 18, MPP_GPIO },	/* Front button (0 = Released, 1 = Pushed ) */
+	{ 19, MPP_UNUSED },
+	{ -1 }
+	/* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */
+	/* 23: Blue front LED off */
+	/* 24: Inhibit board power off (0 = Disabled, 1 = Enabled) */
+};
+
+static void __init d2net_init(void)
+{
+	/*
+	 * Setup basic Orion functions. Need to be called early.
+	 */
+	orion5x_init();
+
+	orion5x_mpp_conf(d2net_mpp_modes);
+
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_ehci0_init();
+	orion5x_eth_init(&d2net_eth_data);
+	orion5x_i2c_init();
+	orion5x_uart0_init();
+
+	d2net_sata_power_init();
+	orion5x_sata_init(&d2net_sata_data);
+
+	orion5x_setup_dev_boot_win(D2NET_NOR_BOOT_BASE,
+				D2NET_NOR_BOOT_SIZE);
+	platform_device_register(&d2net_nor_flash);
+
+	platform_device_register(&d2net_gpio_buttons);
+
+	d2net_gpio_leds_init();
+
+	pr_notice("d2net: Flash write are not yet supported.\n");
+
+	i2c_register_board_info(0, d2net_i2c_devices,
+				ARRAY_SIZE(d2net_i2c_devices));
+}
+
+/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
+
+#ifdef CONFIG_MACH_D2NET
+MACHINE_START(D2NET, "LaCie d2 Network")
+	.phys_io	= ORION5X_REGS_PHYS_BASE,
+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+	.boot_params	= 0x00000100,
+	.init_machine	= d2net_init,
+	.map_io		= orion5x_map_io,
+	.init_irq	= orion5x_init_irq,
+	.timer		= &orion5x_timer,
+	.fixup		= tag_fixup_mem32,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_BIGDISK
+MACHINE_START(BIGDISK, "LaCie Big Disk Network")
+	.phys_io	= ORION5X_REGS_PHYS_BASE,
+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+	.boot_params	= 0x00000100,
+	.init_machine	= d2net_init,
+	.map_io		= orion5x_map_io,
+	.init_irq	= orion5x_init_irq,
+	.timer		= &orion5x_timer,
+	.fixup		= tag_fixup_mem32,
+MACHINE_END
+#endif
+
-- 
cgit v1.2.3


From aec1bad326a99a8b0860fa9d518985ee388c9391 Mon Sep 17 00:00:00 2001
From: Siddarth Gore <gores@marvell.com>
Date: Tue, 9 Jun 2009 14:41:02 +0530
Subject: [ARM] Kirkwood: Add support for 6281-A1

Signed-off-by: Siddarth Gore <gores@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-kirkwood/common.c                | 5 ++++-
 arch/arm/mach-kirkwood/include/mach/kirkwood.h | 1 +
 2 files changed, 5 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 0f691983801..0acb61f3c10 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -838,7 +838,8 @@ int __init kirkwood_find_tclk(void)
 	u32 dev, rev;
 
 	kirkwood_pcie_id(&dev, &rev);
-	if (dev == MV88F6281_DEV_ID && rev == MV88F6281_REV_A0)
+	if (dev == MV88F6281_DEV_ID && (rev == MV88F6281_REV_A0 ||
+					rev == MV88F6281_REV_A1))
 		return 200000000;
 
 	return 166666667;
@@ -872,6 +873,8 @@ static char * __init kirkwood_id(void)
 			return "MV88F6281-Z0";
 		else if (rev == MV88F6281_REV_A0)
 			return "MV88F6281-A0";
+		else if (rev == MV88F6281_REV_A1)
+			return "MV88F6281-A1";
 		else
 			return "MV88F6281-Rev-Unsupported";
 	} else if (dev == MV88F6192_DEV_ID) {
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index 07af858814a..54c132731d2 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -101,6 +101,7 @@
 #define MV88F6281_DEV_ID	0x6281
 #define MV88F6281_REV_Z0	0
 #define MV88F6281_REV_A0	2
+#define MV88F6281_REV_A1	3
 
 #define MV88F6192_DEV_ID	0x6192
 #define MV88F6192_REV_Z0	0
-- 
cgit v1.2.3


From 7153c360ebe5bcfb1e6b7980b90584c75c8c8e4d Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 3 Aug 2009 16:25:12 +0200
Subject: =?UTF-8?q?=C2=B6ARM]=20Orion5x:=20fix=20cpu=20window=20mapping=20?=
 =?UTF-8?q?for=2088f6183?=
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

On the 88f6183, orion5x's setup_cpu_win() fails to ever program any
mbus bridge remap registers, which causes transactions for PCI/PCIe
IO/MEM space to get sent to random mbus targets.  Adding a check for
the 6183 in orion5x_cpu_win_can_remap() is necessary and sufficient
to make PCIe wlan cards work on the 6183 reference design.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-orion5x/addr-map.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index d78731edebb..1a5d6a0e260 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -84,7 +84,8 @@ static int __init orion5x_cpu_win_can_remap(int win)
 	orion5x_pcie_id(&dev, &rev);
 	if ((dev == MV88F5281_DEV_ID && win < 4)
 	    || (dev == MV88F5182_DEV_ID && win < 2)
-	    || (dev == MV88F5181_DEV_ID && win < 2))
+	    || (dev == MV88F5181_DEV_ID && win < 2)
+	    || (dev == MV88F6183_DEV_ID && win < 4))
 		return 1;
 
 	return 0;
-- 
cgit v1.2.3


From 7eeae54c68e91c46ec170e764d1cceac81f35969 Mon Sep 17 00:00:00 2001
From: Dhaval Vasa <dhaval.vasa@einfochips.com>
Date: Mon, 10 Aug 2009 17:37:34 +0530
Subject: [ARM] Kirkwood: Marvell OpenRD-Base board support

reference:
http://open-rd.org
http://code.google.com/p/openrd

This patch is tested for:
1. Boot from DRAM/NAND flash
2. NAND read/write/erase
3. GbE0
4. USB read/write

FIXME:
1. SD/UART1 selection
2. MPP configuration (currently, default)
3. PEX

Signed-off-by: Dhaval Vasa <dhaval.vasa@einfochips.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-kirkwood/Kconfig             |  6 +++
 arch/arm/mach-kirkwood/Makefile            |  1 +
 arch/arm/mach-kirkwood/openrd_base-setup.c | 78 ++++++++++++++++++++++++++++++
 3 files changed, 85 insertions(+)
 create mode 100644 arch/arm/mach-kirkwood/openrd_base-setup.c

(limited to 'arch/arm')

diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 25100f7acf4..0aca451b216 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -38,6 +38,12 @@ config MACH_TS219
 	  Say 'Y' here if you want your kernel to support the
 	  QNAP TS-119 and TS-219 Turbo NAS devices.
 
+config MACH_OPENRD_BASE
+	bool "Marvell OpenRD Base Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell OpenRD Base Board.
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 9dd680e964d..80ab0ec90ee 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -6,5 +6,6 @@ obj-$(CONFIG_MACH_RD88F6281)		+= rd88f6281-setup.o
 obj-$(CONFIG_MACH_MV88F6281GTW_GE)	+= mv88f6281gtw_ge-setup.o
 obj-$(CONFIG_MACH_SHEEVAPLUG)		+= sheevaplug-setup.o
 obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o
+obj-$(CONFIG_MACH_OPENRD_BASE)		+= openrd_base-setup.o
 
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
diff --git a/arch/arm/mach-kirkwood/openrd_base-setup.c b/arch/arm/mach-kirkwood/openrd_base-setup.c
new file mode 100644
index 00000000000..3144bb87578
--- /dev/null
+++ b/arch/arm/mach-kirkwood/openrd_base-setup.c
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/mach-kirkwood/openrd_base-setup.c
+ *
+ * Marvell OpenRD Base Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition openrd_base_nand_parts[] = {
+	{
+		.name = "u-boot",
+		.offset = 0,
+		.size = SZ_1M
+	}, {
+		.name = "uImage",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_4M
+	}, {
+		.name = "root",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL
+	},
+};
+
+static struct mv643xx_eth_platform_data openrd_base_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mvsdio_platform_data openrd_base_mvsdio_data = {
+	.gpio_card_detect = 29,	/* MPP29 used as SD card detect */
+};
+
+static unsigned int openrd_base_mpp_config[] __initdata = {
+	MPP29_GPIO,
+	0
+};
+
+static void __init openrd_base_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(openrd_base_mpp_config);
+
+	kirkwood_uart0_init();
+	kirkwood_nand_init(ARRAY_AND_SIZE(openrd_base_nand_parts), 25);
+
+	kirkwood_ehci_init();
+
+	kirkwood_ge00_init(&openrd_base_ge00_data);
+	kirkwood_sdio_init(&openrd_base_mvsdio_data);
+}
+
+MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
+	/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= openrd_base_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
-- 
cgit v1.2.3


From decf77079511fc5ef832ead074bb45e4e0b099c0 Mon Sep 17 00:00:00 2001
From: Ron Lee <ron@debian.org>
Date: Mon, 10 Aug 2009 18:23:48 +0530
Subject: [ARM] Kirkwood: Initialise SATA for OpenRD-Base

Signed-off-by: Ron Lee <ron@debian.org>
Signed-off-by: Dhaval Vasa <dhaval.vasa@einfochips.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-kirkwood/openrd_base-setup.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-kirkwood/openrd_base-setup.c b/arch/arm/mach-kirkwood/openrd_base-setup.c
index 3144bb87578..947dfb8cd5b 100644
--- a/arch/arm/mach-kirkwood/openrd_base-setup.c
+++ b/arch/arm/mach-kirkwood/openrd_base-setup.c
@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -40,6 +41,10 @@ static struct mv643xx_eth_platform_data openrd_base_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
 };
 
+static struct mv_sata_platform_data openrd_base_sata_data = {
+	.n_ports	= 2,
+};
+
 static struct mvsdio_platform_data openrd_base_mvsdio_data = {
 	.gpio_card_detect = 29,	/* MPP29 used as SD card detect */
 };
@@ -63,6 +68,7 @@ static void __init openrd_base_init(void)
 	kirkwood_ehci_init();
 
 	kirkwood_ge00_init(&openrd_base_ge00_data);
+	kirkwood_sata_init(&openrd_base_sata_data);
 	kirkwood_sdio_init(&openrd_base_mvsdio_data);
 }
 
-- 
cgit v1.2.3


From b88fb83b138d4a377abea9461b2d58b9bf8ad9fe Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
Date: Thu, 13 Aug 2009 20:38:16 +0200
Subject: netx: Use get_irqnr_preamble to initialize base register
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This patch optimizes the irq handling a bit.  Now the base register is
only computed once per irq exception instead of at least twice.
Moreover the mov+add sequence is simplified to an ldr (which might save
some cycles depending on memory timing).

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 arch/arm/mach-netx/include/mach/entry-macro.S | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-netx/include/mach/entry-macro.S b/arch/arm/mach-netx/include/mach/entry-macro.S
index a1952a0feda..844f1f9acbd 100644
--- a/arch/arm/mach-netx/include/mach/entry-macro.S
+++ b/arch/arm/mach-netx/include/mach/entry-macro.S
@@ -24,15 +24,13 @@
 		.endm
 
 		.macro  get_irqnr_preamble, base, tmp
+		ldr	\base, =io_p2v(0x001ff000)
 		.endm
 
 		.macro  arch_ret_to_user, tmp1, tmp2
 		.endm
 
 		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-		mov	\base, #io_p2v(0x00100000)
-		add	\base, \base, #0x000ff000
-
 		ldr	\irqstat, [\base, #0]
 		clz	\irqnr, \irqstat
 		rsb     \irqnr, \irqnr, #31
-- 
cgit v1.2.3


From 181f817eaaca4c1f8a9c265d339d2b96de8b245d Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
Date: Thu, 13 Aug 2009 20:38:16 +0200
Subject: [ARM] support tracing when using newer compilers
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Since gcc 4.4 the name and calling convention for function profiling
on ARM changed.  With this patch both types are supported.

See http://sourceware.org/ml/libc-ports/2008-04/msg00009.html for some
details.

Lightly-Tested-by: Anand Gadiyar <gadiyar@ti.com>
Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 arch/arm/include/asm/ftrace.h  |  1 +
 arch/arm/kernel/armksyms.c     |  1 +
 arch/arm/kernel/entry-common.S | 19 +++++++++++++++++++
 3 files changed, 21 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h
index 39c8bc1a006..0d4c478e01b 100644
--- a/arch/arm/include/asm/ftrace.h
+++ b/arch/arm/include/asm/ftrace.h
@@ -7,6 +7,7 @@
 
 #ifndef __ASSEMBLY__
 extern void mcount(void);
+extern void __gnu_mcount_nc(void);
 #endif
 
 #endif
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index 531e1860e54..0e627705f74 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -186,4 +186,5 @@ EXPORT_SYMBOL(_find_next_bit_be);
 
 #ifdef CONFIG_FUNCTION_TRACER
 EXPORT_SYMBOL(mcount);
+EXPORT_SYMBOL(__gnu_mcount_nc);
 #endif
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 366e5097a41..99208728d48 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -132,6 +132,25 @@ ftrace_call:
 
 #else
 
+ENTRY(__gnu_mcount_nc)
+	stmdb sp!, {r0-r3, lr}
+	ldr r0, =ftrace_trace_function
+	ldr r2, [r0]
+	adr r0, ftrace_stub
+	cmp r0, r2
+	bne gnu_trace
+	ldmia sp!, {r0-r3, ip, lr}
+	bx ip
+
+gnu_trace:
+	ldr r1, [sp, #20]			@ lr of instrumented routine
+	mov r0, lr
+	sub r0, r0, #MCOUNT_INSN_SIZE
+	mov lr, pc
+	mov pc, r2
+	ldmia sp!, {r0-r3, ip, lr}
+	bx ip
+
 ENTRY(mcount)
 	stmdb sp!, {r0-r3, lr}
 	ldr r0, =ftrace_trace_function
-- 
cgit v1.2.3


From 0d928b0b616d1c5c5fe76019a87cba171ca91633 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
Date: Thu, 13 Aug 2009 20:38:17 +0200
Subject: Complete irq tracing support for ARM
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Before this patch enabling and disabling irqs in assembler code and by
the hardware wasn't tracked completly.

I had to transpose two instructions in arch/arm/lib/bitops.h because
restore_irqs doesn't preserve the flags with CONFIG_TRACE_IRQFLAGS=y

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 arch/arm/include/asm/assembler.h | 49 ++++++++++++++++++++++++++++++++++++----
 arch/arm/kernel/entry-armv.S     | 10 ++++----
 arch/arm/lib/bitops.h            |  2 +-
 3 files changed, 49 insertions(+), 12 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 15f8a092b70..44912cd5da1 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -74,23 +74,56 @@
  * Enable and disable interrupts
  */
 #if __LINUX_ARM_ARCH__ >= 6
-	.macro	disable_irq
+	.macro	disable_irq_notrace
 	cpsid	i
 	.endm
 
-	.macro	enable_irq
+	.macro	enable_irq_notrace
 	cpsie	i
 	.endm
 #else
-	.macro	disable_irq
+	.macro	disable_irq_notrace
 	msr	cpsr_c, #PSR_I_BIT | SVC_MODE
 	.endm
 
-	.macro	enable_irq
+	.macro	enable_irq_notrace
 	msr	cpsr_c, #SVC_MODE
 	.endm
 #endif
 
+	.macro asm_trace_hardirqs_off
+#if defined(CONFIG_TRACE_IRQFLAGS)
+	stmdb   sp!, {r0-r3, ip, lr}
+	bl	trace_hardirqs_off
+	ldmia	sp!, {r0-r3, ip, lr}
+#endif
+	.endm
+
+	.macro asm_trace_hardirqs_on_cond, cond
+#if defined(CONFIG_TRACE_IRQFLAGS)
+	/*
+	 * actually the registers should be pushed and pop'd conditionally, but
+	 * after bl the flags are certainly clobbered
+	 */
+	stmdb   sp!, {r0-r3, ip, lr}
+	bl\cond	trace_hardirqs_on
+	ldmia	sp!, {r0-r3, ip, lr}
+#endif
+	.endm
+
+	.macro asm_trace_hardirqs_on
+	asm_trace_hardirqs_on_cond al
+	.endm
+
+	.macro disable_irq
+	disable_irq_notrace
+	asm_trace_hardirqs_off
+	.endm
+
+	.macro enable_irq
+	asm_trace_hardirqs_on
+	enable_irq_notrace
+	.endm
 /*
  * Save the current IRQ state and disable IRQs.  Note that this macro
  * assumes FIQs are enabled, and that the processor is in SVC mode.
@@ -104,10 +137,16 @@
  * Restore interrupt state previously stored in a register.  We don't
  * guarantee that this will preserve the flags.
  */
-	.macro	restore_irqs, oldcpsr
+	.macro	restore_irqs_notrace, oldcpsr
 	msr	cpsr_c, \oldcpsr
 	.endm
 
+	.macro restore_irqs, oldcpsr
+	tst	\oldcpsr, #PSR_I_BIT
+	asm_trace_hardirqs_on_cond eq
+	restore_irqs_notrace \oldcpsr
+	.endm
+
 #define USER(x...)				\
 9999:	x;					\
 	.section __ex_table,"a";		\
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index fc8af43c500..792abd0dfae 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -151,6 +151,8 @@ ENDPROC(__und_invalid)
 	@  r4 - orig_r0 (see pt_regs definition in ptrace.h)
 	@
 	stmia	r5, {r0 - r4}
+
+	asm_trace_hardirqs_off
 	.endm
 
 	.align	5
@@ -206,9 +208,6 @@ ENDPROC(__dabt_svc)
 __irq_svc:
 	svc_entry
 
-#ifdef CONFIG_TRACE_IRQFLAGS
-	bl	trace_hardirqs_off
-#endif
 #ifdef CONFIG_PREEMPT
 	get_thread_info tsk
 	ldr	r8, [tsk, #TI_PREEMPT]		@ get preempt count
@@ -383,6 +382,8 @@ ENDPROC(__pabt_svc)
 	@ Clear FP to mark the first stack frame
 	@
 	zero_fp
+
+	asm_trace_hardirqs_off
 	.endm
 
 	.macro	kuser_cmpxchg_check
@@ -437,9 +438,6 @@ __irq_usr:
 	usr_entry
 	kuser_cmpxchg_check
 
-#ifdef CONFIG_TRACE_IRQFLAGS
-	bl	trace_hardirqs_off
-#endif
 	get_thread_info tsk
 #ifdef CONFIG_PREEMPT
 	ldr	r8, [tsk, #TI_PREEMPT]		@ get preempt count
diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h
index c7f2627385e..d42252918bf 100644
--- a/arch/arm/lib/bitops.h
+++ b/arch/arm/lib/bitops.h
@@ -60,8 +60,8 @@
 	tst	r2, r0, lsl r3
 	\instr	r2, r2, r0, lsl r3
 	\store	r2, [r1]
-	restore_irqs ip
 	moveq	r0, #0
+	restore_irqs ip
 	mov	pc, lr
 	.endm
 #endif
-- 
cgit v1.2.3


From d45a398fca6b03f16d01c9253c3a8c96d804f532 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
Date: Thu, 13 Aug 2009 20:38:17 +0200
Subject: Use kernel/Kconfig.preempt for ARM
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

before this patch ARM had it's own definition of CONFIG_PREEMPT.
Instead of that use the general definition provided in
kernel/Kconfig.preempt.

This patch changes the available options in *config.  Namely PREEMPT
isn't a stand alone bool anymore, but part of a 'choice' the
following Kconfig symbols are added:

	PREEMPT_NONE
	PREEMPT_VOLUNTARY

Selecting PREEMPT_NONE now produces exactly the code as not selecting
PREEMPT before (apart from a comment in
/sys/kernel/debug/tracing/(per_cpu/cpuX/)?trace).  The only difference
PREEMPT_VOLUNTARY does is that might_resched might reschedule.  Both
should't introduce regressions.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
---
 arch/arm/Kconfig | 13 +------------
 1 file changed, 1 insertion(+), 12 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aef63c8e3d2..eac1a927ca6 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -962,18 +962,7 @@ config LOCAL_TIMERS
 	  accounting to be spread across the timer interval, preventing a
 	  "thundering herd" at every timer tick.
 
-config PREEMPT
-	bool "Preemptible Kernel (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-	help
-	  This option reduces the latency of the kernel when reacting to
-	  real-time or interactive events by allowing a low priority process to
-	  be preempted even if it is in kernel mode executing a system call.
-	  This allows applications to run more reliably even when the system is
-	  under load.
-
-	  Say Y here if you are building a kernel for a desktop, embedded
-	  or real-time system.  Say N if you are unsure.
+source kernel/Kconfig.preempt
 
 config HZ
 	int
-- 
cgit v1.2.3


From ac25150f2c55ea26447af0fa1d4e2bb07f97384d Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
Date: Thu, 13 Aug 2009 21:09:21 +0200
Subject: [ARM] let arch/arm/Kconfig source drivers/Kconfig
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The changes introduced by this change are:
  - drivers/mtd/Kconfig doesn't depend on ALIGNMENT_TRAP ||
    !CPU_CP15_MMU any more
  - the following files are sourced additionally:
    + drivers/macintosh/Kconfig
      completely depends on PPC || MAC || X86
    + drivers/telephony/Kconfig
      new
    + drivers/pps/Kconfig
      new
    + drivers/infiniband/Kconfig
      new
    + drivers/edac/Kconfig
      depends on X86 || PPC
    + drivers/vlynq/Kconfig
      depends on AR7 && EXPERIMENTAL (that is ARCH_MIPS)
    + drivers/xen/Kconfig
      everything depends on XEN
    + drivers/platform/Kconfig
      depends on X86
  - drivers/regulator/Kconfig is sourced later as is
    drivers/accessibility/Kconfig

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 arch/arm/Kconfig | 102 +------------------------------------------------------
 1 file changed, 1 insertion(+), 101 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index eac1a927ca6..a7eb44a1955 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1366,107 +1366,7 @@ endmenu
 
 source "net/Kconfig"
 
-menu "Device Drivers"
-
-source "drivers/base/Kconfig"
-
-source "drivers/connector/Kconfig"
-
-if ALIGNMENT_TRAP || !CPU_CP15_MMU
-source "drivers/mtd/Kconfig"
-endif
-
-source "drivers/parport/Kconfig"
-
-source "drivers/pnp/Kconfig"
-
-source "drivers/block/Kconfig"
-
-# misc before ide - BLK_DEV_SGIIOC4 depends on SGI_IOC4
-
-source "drivers/misc/Kconfig"
-
-source "drivers/ide/Kconfig"
-
-source "drivers/scsi/Kconfig"
-
-source "drivers/ata/Kconfig"
-
-source "drivers/md/Kconfig"
-
-source "drivers/message/fusion/Kconfig"
-
-source "drivers/ieee1394/Kconfig"
-
-source "drivers/message/i2o/Kconfig"
-
-source "drivers/net/Kconfig"
-
-source "drivers/isdn/Kconfig"
-
-# input before char - char/joystick depends on it. As does USB.
-
-source "drivers/input/Kconfig"
-
-source "drivers/char/Kconfig"
-
-source "drivers/i2c/Kconfig"
-
-source "drivers/spi/Kconfig"
-
-source "drivers/gpio/Kconfig"
-
-source "drivers/w1/Kconfig"
-
-source "drivers/power/Kconfig"
-
-source "drivers/hwmon/Kconfig"
-
-source "drivers/thermal/Kconfig"
-
-source "drivers/watchdog/Kconfig"
-
-source "drivers/ssb/Kconfig"
-
-#source "drivers/l3/Kconfig"
-
-source "drivers/mfd/Kconfig"
-
-source "drivers/media/Kconfig"
-
-source "drivers/video/Kconfig"
-
-source "sound/Kconfig"
-
-source "drivers/hid/Kconfig"
-
-source "drivers/usb/Kconfig"
-
-source "drivers/uwb/Kconfig"
-
-source "drivers/mmc/Kconfig"
-
-source "drivers/memstick/Kconfig"
-
-source "drivers/accessibility/Kconfig"
-
-source "drivers/leds/Kconfig"
-
-source "drivers/rtc/Kconfig"
-
-source "drivers/dma/Kconfig"
-
-source "drivers/dca/Kconfig"
-
-source "drivers/auxdisplay/Kconfig"
-
-source "drivers/regulator/Kconfig"
-
-source "drivers/uio/Kconfig"
-
-source "drivers/staging/Kconfig"
-
-endmenu
+source "drivers/Kconfig"
 
 source "fs/Kconfig"
 
-- 
cgit v1.2.3


From 4ac0478f2afaf8e778b4190d6218459a9dbf2a8f Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Thu, 30 Jul 2009 02:55:01 +0200
Subject: ALSA: Allow passing platform_data for pxa2xx-ac97

This patch adds support for passing platform data to ac97 bus devices
from PXA2xx-AC97 driver..

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/mach-pxa/include/mach/audio.h | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/include/mach/audio.h b/arch/arm/mach-pxa/include/mach/audio.h
index 16eb02552d5..a3449e35a6f 100644
--- a/arch/arm/mach-pxa/include/mach/audio.h
+++ b/arch/arm/mach-pxa/include/mach/audio.h
@@ -3,10 +3,12 @@
 
 #include <sound/core.h>
 #include <sound/pcm.h>
+#include <sound/ac97_codec.h>
 
 /*
  * @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95)
  *              a -1 value means no gpio will be used for reset
+ * @codec_pdata: AC97 codec platform_data
 
  * reset_gpio should only be specified for pxa27x CPUs where a silicon
  * bug prevents correct operation of the reset line. If not specified,
@@ -20,6 +22,7 @@ typedef struct {
 	void (*resume)(void *);
 	void *priv;
 	int reset_gpio;
+	void *codec_pdata[AC97_BUS_MAX_DEVICES];
 } pxa2xx_audio_ops_t;
 
 extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops);
-- 
cgit v1.2.3


From 4d4e2bc268e188a8793ce96af20576374098c17b Mon Sep 17 00:00:00 2001
From: Marek Szyprowski <m.szyprowski@samsung.com>
Date: Wed, 24 Jun 2009 08:05:43 +0200
Subject: ARM: NCP: make ncp_iodesc static and move it to initdata section

Make ncp_iodesc struct static to clean a public namespace a bit and move
it to __initdata section to save memory a bit.

Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6410/mach-ncp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s3c6410/mach-ncp.c b/arch/arm/mach-s3c6410/mach-ncp.c
index 6030636f854..55e9bbfaf68 100644
--- a/arch/arm/mach-s3c6410/mach-ncp.c
+++ b/arch/arm/mach-s3c6410/mach-ncp.c
@@ -79,7 +79,7 @@ static struct platform_device *ncp_devices[] __initdata = {
 	&s3c_device_i2c0,
 };
 
-struct map_desc ncp_iodesc[] = {};
+static struct map_desc ncp_iodesc[] __initdata = {};
 
 static void __init ncp_map_io(void)
 {
-- 
cgit v1.2.3


From bd258e525a40efc2c3798b76a725cd3d5c4e3d93 Mon Sep 17 00:00:00 2001
From: Matt Hsu <matt@0xlab.org>
Date: Mon, 29 Jun 2009 19:03:41 +0800
Subject: ARM: S3C64XX: Add UART2,UART3 support for SMDK6410 (resend)

Add proper uartcfg for UART port 2,3 and tidy it up on SMDK6410.

Signed-off-by: Matt Hsu <matt@0xlab.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6410/mach-smdk6410.c | 26 ++++++++++++++++++++------
 1 file changed, 20 insertions(+), 6 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index bc9a7dea567..ea51dbe76e3 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -65,16 +65,30 @@ static struct s3c2410_uartcfg smdk6410_uartcfgs[] __initdata = {
 	[0] = {
 		.hwport	     = 0,
 		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
 	},
 	[1] = {
 		.hwport	     = 1,
 		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[3] = {
+		.hwport	     = 3,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
 	},
 };
 
-- 
cgit v1.2.3


From 25b15da14a789846672e73d19862b5fe5ad14346 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Tue, 4 Aug 2009 16:25:12 +0100
Subject: ARM: S3C64XX: Add mapping for IISv4 port

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6400/include/mach/map.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index 5057d9948d3..41d01a91a5a 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -46,6 +46,7 @@
 #define S3C64XX_PA_IIS1		(0x7F003000)
 #define S3C64XX_PA_TIMER	(0x7F006000)
 #define S3C64XX_PA_IIC0		(0x7F004000)
+#define S3C64XX_PA_IISV4	(0x7F00D000)
 #define S3C64XX_PA_IIC1		(0x7F00F000)
 
 #define S3C64XX_PA_GPIO		(0x7F008000)
-- 
cgit v1.2.3


From c7c8f615c8d1b49225ed86406603e7ac24d2a6d9 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Wed, 5 Aug 2009 18:21:59 +0100
Subject: ARM: S3C64XX: Add address mapping for AC97 controller

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6400/include/mach/map.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index 41d01a91a5a..9fdf87ae47c 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -42,6 +42,7 @@
 #define S3C64XX_PA_USB_HSOTG	(0x7C000000)
 #define S3C64XX_PA_WATCHDOG	(0x7E004000)
 #define S3C64XX_PA_SYSCON	(0x7E00F000)
+#define S3C64XX_PA_AC97		(0x7F001000)
 #define S3C64XX_PA_IIS0		(0x7F002000)
 #define S3C64XX_PA_IIS1		(0x7F003000)
 #define S3C64XX_PA_TIMER	(0x7F006000)
-- 
cgit v1.2.3


From c233d94931cebc8ec805fb98856f34ad16d49e4f Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Wed, 5 Aug 2009 18:21:57 +0100
Subject: ARM: S3C: Move S3C64xx audio devices into S3C64xx directory

Allowing us to make the Kconfig a little bit saner.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/Makefile        |  1 -
 arch/arm/plat-s3c/dev-audio.c     | 68 ---------------------------------------
 arch/arm/plat-s3c64xx/Makefile    |  3 +-
 arch/arm/plat-s3c64xx/dev-audio.c | 68 +++++++++++++++++++++++++++++++++++++++
 4 files changed, 70 insertions(+), 70 deletions(-)
 delete mode 100644 arch/arm/plat-s3c/dev-audio.c
 create mode 100644 arch/arm/plat-s3c64xx/dev-audio.c

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index 3e27720ae35..f32d045e7e3 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -38,7 +38,6 @@ obj-$(CONFIG_S3C_DEV_HSMMC)	+= dev-hsmmc.o
 obj-$(CONFIG_S3C_DEV_HSMMC1)	+= dev-hsmmc1.o
 obj-y				+= dev-i2c0.o
 obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
-obj-$(CONFIG_SND_S3C64XX_SOC_I2S)	+= dev-audio.o
 obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
 obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
 obj-$(CONFIG_S3C_DEV_USB_HSOTG)	+= dev-usb-hsotg.o
diff --git a/arch/arm/plat-s3c/dev-audio.c b/arch/arm/plat-s3c/dev-audio.c
deleted file mode 100644
index 1322beb40dd..00000000000
--- a/arch/arm/plat-s3c/dev-audio.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/* linux/arch/arm/plat-s3c/dev-audio.c
- *
- * Copyright 2009 Wolfson Microelectronics
- *      Mark Brown <broonie@opensource.wolfsonmicro.com>
- *
-
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-
-
-static struct resource s3c64xx_iis0_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_IIS0,
-		.end   = S3C64XX_PA_IIS0 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device s3c64xx_device_iis0 = {
-	.name		  = "s3c64xx-iis",
-	.id		  = 0,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_iis0_resource),
-	.resource	  = s3c64xx_iis0_resource,
-};
-EXPORT_SYMBOL(s3c64xx_device_iis0);
-
-static struct resource s3c64xx_iis1_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_IIS1,
-		.end   = S3C64XX_PA_IIS1 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device s3c64xx_device_iis1 = {
-	.name		  = "s3c64xx-iis",
-	.id		  = 1,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_iis1_resource),
-	.resource	  = s3c64xx_iis1_resource,
-};
-EXPORT_SYMBOL(s3c64xx_device_iis1);
-
-static struct resource s3c64xx_iisv4_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_IISV4,
-		.end   = S3C64XX_PA_IISV4 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device s3c64xx_device_iisv4 = {
-	.name		  = "s3c64xx-iis-v4",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_iisv4_resource),
-	.resource	  = s3c64xx_iisv4_resource,
-};
-EXPORT_SYMBOL(s3c64xx_device_iisv4);
diff --git a/arch/arm/plat-s3c64xx/Makefile b/arch/arm/plat-s3c64xx/Makefile
index 3c8882cd626..b85b4359e93 100644
--- a/arch/arm/plat-s3c64xx/Makefile
+++ b/arch/arm/plat-s3c64xx/Makefile
@@ -40,4 +40,5 @@ obj-$(CONFIG_S3C64XX_DMA)	+= dma.o
 obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
 obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
 obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
-obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
\ No newline at end of file
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
+obj-$(CONFIG_SND_S3C24XX_SOC) += dev-audio.o
diff --git a/arch/arm/plat-s3c64xx/dev-audio.c b/arch/arm/plat-s3c64xx/dev-audio.c
new file mode 100644
index 00000000000..1322beb40dd
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/dev-audio.c
@@ -0,0 +1,68 @@
+/* linux/arch/arm/plat-s3c/dev-audio.c
+ *
+ * Copyright 2009 Wolfson Microelectronics
+ *      Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+
+static struct resource s3c64xx_iis0_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_IIS0,
+		.end   = S3C64XX_PA_IIS0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device s3c64xx_device_iis0 = {
+	.name		  = "s3c64xx-iis",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_iis0_resource),
+	.resource	  = s3c64xx_iis0_resource,
+};
+EXPORT_SYMBOL(s3c64xx_device_iis0);
+
+static struct resource s3c64xx_iis1_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_IIS1,
+		.end   = S3C64XX_PA_IIS1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device s3c64xx_device_iis1 = {
+	.name		  = "s3c64xx-iis",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_iis1_resource),
+	.resource	  = s3c64xx_iis1_resource,
+};
+EXPORT_SYMBOL(s3c64xx_device_iis1);
+
+static struct resource s3c64xx_iisv4_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_IISV4,
+		.end   = S3C64XX_PA_IISV4 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device s3c64xx_device_iisv4 = {
+	.name		  = "s3c64xx-iis-v4",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_iisv4_resource),
+	.resource	  = s3c64xx_iisv4_resource,
+};
+EXPORT_SYMBOL(s3c64xx_device_iisv4);
-- 
cgit v1.2.3


From 229fd8ffba57dfaea59078b9144371369ffdb0a3 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Mon, 3 Aug 2009 17:26:57 +0100
Subject: ARM: S3C24XX: Add FIQ IRQ routing support

Add support for routing an IRQ from the normal ARM IRQ mechanism to the
FIQ input of the processor.

Note, also fix a bug where the init_FIQ() function has not been called
when CONFIG_FIQ is enabled.

Signed-off-by; Ben Dooks <ben@simtec.co.uk>

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/include/plat/fiq.h | 13 ++++++++++++
 arch/arm/plat-s3c24xx/irq.c              | 36 ++++++++++++++++++++++++++++++++
 2 files changed, 49 insertions(+)
 create mode 100644 arch/arm/plat-s3c24xx/include/plat/fiq.h

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c24xx/include/plat/fiq.h b/arch/arm/plat-s3c24xx/include/plat/fiq.h
new file mode 100644
index 00000000000..8521b8372c5
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/fiq.h
@@ -0,0 +1,13 @@
+/* linux/include/asm-arm/plat-s3c24xx/fiq.h
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C24XX CPU FIQ support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern int s3c24xx_set_fiq(unsigned int irq, bool on);
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index 958737775ad..d02f5f02045 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -493,6 +493,38 @@ s3c_irq_demux_extint4t7(unsigned int irq,
 	}
 }
 
+#ifdef CONFIG_FIQ
+/**
+ * s3c24xx_set_fiq - set the FIQ routing
+ * @irq: IRQ number to route to FIQ on processor.
+ * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing.
+ *
+ * Change the state of the IRQ to FIQ routing depending on @irq and @on. If
+ * @on is true, the @irq is checked to see if it can be routed and the
+ * interrupt controller updated to route the IRQ. If @on is false, the FIQ
+ * routing is cleared, regardless of which @irq is specified.
+ */
+int s3c24xx_set_fiq(unsigned int irq, bool on)
+{
+	u32 intmod;
+	unsigned offs;
+
+	if (on) {
+		offs = irq - FIQ_START;
+		if (offs > 31)
+			return -EINVAL;
+
+		intmod = 1 << offs;
+	} else {
+		intmod = 0;
+	}
+
+	__raw_writel(intmod, S3C2410_INTMOD);
+	return 0;
+}
+#endif
+
+
 /* s3c24xx_init_irq
  *
  * Initialise S3C2410 IRQ system
@@ -505,6 +537,10 @@ void __init s3c24xx_init_irq(void)
 	int irqno;
 	int i;
 
+#ifdef CONFIG_FIQ
+	init_FIQ();
+#endif
+
 	irqdbf("s3c2410_init_irq: clearing interrupt status flags\n");
 
 	/* first, clear all interrupts pending... */
-- 
cgit v1.2.3


From d91e9a7ab93e09e5a0fbed73f3a6a330f14620a4 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Wed, 5 Aug 2009 18:29:57 +0100
Subject: ARM: S3C24XX: Add platform device for AC97 controller

Move the definition of the "generic" IRQ in the process.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/include/mach/irqs.h |  6 ++++
 arch/arm/plat-s3c/include/plat/devs.h     |  1 +
 arch/arm/plat-s3c24xx/devs.c              | 50 +++++++++++++++++++++++++++++++
 3 files changed, 57 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h
index 2a2384ffa7b..6c12c6312ad 100644
--- a/arch/arm/mach-s3c2410/include/mach/irqs.h
+++ b/arch/arm/mach-s3c2410/include/mach/irqs.h
@@ -164,6 +164,12 @@
 #define IRQ_S3CUART_TX3		IRQ_S3C2443_TX3
 #define IRQ_S3CUART_ERR3	IRQ_S3C2443_ERR3
 
+#ifdef CONFIG_CPU_S3C2440
+#define IRQ_S3C244x_AC97 IRQ_S3C2440_AC97
+#else
+#define IRQ_S3C244x_AC97 IRQ_S3C2443_AC97
+#endif
+
 /* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
 #define FIQ_START		IRQ_EINT0
 
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index 2e170827e0b..2e6599411c2 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -56,5 +56,6 @@ extern struct platform_device s3c_device_usb_hsotg;
 #ifdef CONFIG_CPU_S3C2440
 
 extern struct platform_device s3c_device_camif;
+extern struct platform_device s3c_device_ac97;
 
 #endif
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 4eb378c89a3..4553ad6c7ad 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -26,6 +26,8 @@
 #include <asm/mach/irq.h>
 #include <mach/fb.h>
 #include <mach/hardware.h>
+#include <mach/dma.h>
+#include <mach/irqs.h>
 #include <asm/irq.h>
 
 #include <plat/regs-serial.h>
@@ -473,4 +475,52 @@ struct platform_device s3c_device_camif = {
 
 EXPORT_SYMBOL(s3c_device_camif);
 
+/* AC97 */
+
+static struct resource s3c_ac97_resource[] = {
+	[0] = {
+		.start = S3C2440_PA_AC97,
+		.end   = S3C2440_PA_AC97 + S3C2440_SZ_AC97 -1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_S3C244x_AC97,
+		.end   = IRQ_S3C244x_AC97,
+		.flags = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.name  = "PCM out",
+		.start = DMACH_PCM_OUT,
+		.end   = DMACH_PCM_OUT,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.name  = "PCM in",
+		.start = DMACH_PCM_IN,
+		.end   = DMACH_PCM_IN,
+		.flags = IORESOURCE_DMA,
+	},
+	[4] = {
+		.name  = "Mic in",
+		.start = DMACH_MIC_IN,
+		.end   = DMACH_MIC_IN,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static u64 s3c_device_ac97_dmamask = 0xffffffffUL;
+
+struct platform_device s3c_device_ac97 = {
+	.name		  = "s3c-ac97",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c_ac97_resource),
+	.resource	  = s3c_ac97_resource,
+	.dev              = {
+		.dma_mask = &s3c_device_ac97_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+
+EXPORT_SYMBOL(s3c_device_ac97);
+
 #endif // CONFIG_CPU_S32440
-- 
cgit v1.2.3


From a2c195fdde20772a90ee98ce3523dcfbda49eee6 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Mon, 3 Aug 2009 17:26:50 +0100
Subject: ARM: S3C24XX: Add SPI bus 1 on GPD8 through GPD10

Add configuration callback for SPI bus 1 on GPD[8..10] and ensure the
correct GPIO configuration register definitions in regs-gpio.h

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/include/mach/regs-gpio.h |  4 ++-
 arch/arm/mach-s3c2410/include/mach/spi.h       |  3 ++
 arch/arm/plat-s3c24xx/Kconfig                  |  6 ++++
 arch/arm/plat-s3c24xx/Makefile                 |  1 +
 arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c     | 38 ++++++++++++++++++++++++++
 5 files changed, 51 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
index b278d0c45cc..f6e8eec879c 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -328,13 +328,15 @@
 
 #define S3C2410_GPD8_VD16	(0x02 << 16)
 #define S3C2400_GPD8_TOUT3	(0x02 << 16)
+#define S3C2440_GPD8_SPIMISO1	(0x03 << 16)
 
 #define S3C2410_GPD9_VD17	(0x02 << 18)
 #define S3C2400_GPD9_TCLK0	(0x02 << 18)
-#define S3C2410_GPD9_MASK       (0x03 << 18)
+#define S3C2440_GPD9_SPIMOSI1	(0x03 << 18)
 
 #define S3C2410_GPD10_VD18	(0x02 << 20)
 #define S3C2400_GPD10_nWAIT	(0x02 << 20)
+#define S3C2440_GPD10_SPICLK1	(0x03 << 20)
 
 #define S3C2410_GPD11_VD19	(0x02 << 22)
 
diff --git a/arch/arm/mach-s3c2410/include/mach/spi.h b/arch/arm/mach-s3c2410/include/mach/spi.h
index 1d300fb112b..193b39d654e 100644
--- a/arch/arm/mach-s3c2410/include/mach/spi.h
+++ b/arch/arm/mach-s3c2410/include/mach/spi.h
@@ -30,4 +30,7 @@ extern void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
 extern void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
 					      int enable);
 
+extern void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi,
+					       int enable);
+
 #endif /* __ASM_ARCH_SPI_H */
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 5b0bc914f58..aaae456018b 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -105,6 +105,12 @@ config S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7
 	  SPI GPIO configuration code for BUS 1 when connected to
 	  GPG5, GPG6 and GPG7.
 
+config S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10
+	bool
+	help
+	  SPI GPIO configuration code for BUS 1 when connected to
+	  GPD8, GPD9 and GPD10.
+
 # common code for s3c24xx based machines, such as the SMDKs.
 
 config MACH_SMDK
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 579a165c282..59416796fb1 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_ARCH_S3C2410)	+= setup-i2c.o
 
 obj-$(CONFIG_S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13) += spi-bus0-gpe11_12_13.o
 obj-$(CONFIG_S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7)    += spi-bus1-gpg5_6_7.o
+obj-$(CONFIG_S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10)	 += spi-bus1-gpd8_9_10.o
 
 # machine common support
 
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
new file mode 100644
index 00000000000..89fcf5308cf
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
@@ -0,0 +1,38 @@
+/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpd8_9_10.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX SPI - gpio configuration for bus 1 on gpd8,9,10
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+
+#include <mach/spi.h>
+#include <mach/regs-gpio.h>
+
+void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi,
+					int enable)
+{
+
+	printk(KERN_INFO "%s(%d)\n", __func__, enable);
+	if (enable) {
+		s3c2410_gpio_cfgpin(S3C2410_GPD(10), S3C2440_GPD10_SPICLK1);
+		s3c2410_gpio_cfgpin(S3C2410_GPD(9), S3C2440_GPD9_SPIMOSI1);
+		s3c2410_gpio_cfgpin(S3C2410_GPD(8), S3C2440_GPD8_SPIMISO1);
+		s3c2410_gpio_pullup(S3C2410_GPD(10), 0);
+		s3c2410_gpio_pullup(S3C2410_GPD(9), 0);
+	} else {
+		s3c2410_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT);
+		s3c2410_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT);
+		s3c2410_gpio_pullup(S3C2410_GPD(10), 1);
+		s3c2410_gpio_pullup(S3C2410_GPD(9), 1);
+		s3c2410_gpio_pullup(S3C2410_GPD(8), 1);
+	}
+}
-- 
cgit v1.2.3


From cf87a6e2fe95891575c45ba1a0ecb8cf53c09732 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 20 Jul 2009 08:18:47 +0200
Subject: ARM: mxc: Fix i2c_board_info definitions

Fix i2c_board_info definitions - we were defining the 'type' field
of these structures twice since the first argument of I2C_BOARD_INFO
sets this field.  Move the second definition into I2C_BOARD_INFO().

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Jean Delvare <khali@linux-fr.org>
---
 arch/arm/mach-mx1/mx1ads.c          |  6 ++----
 arch/arm/mach-mx2/eukrea_cpuimx27.c |  3 +--
 arch/arm/mach-mx2/pcm038.c          | 12 ++++--------
 arch/arm/mach-mx3/pcm037.c          |  3 +--
 arch/arm/mach-mx3/pcm043.c          |  3 +--
 5 files changed, 9 insertions(+), 18 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c
index 6af064d19b0..30f04e56faf 100644
--- a/arch/arm/mach-mx1/mx1ads.c
+++ b/arch/arm/mach-mx1/mx1ads.c
@@ -104,12 +104,10 @@ static struct imxi2c_platform_data mx1ads_i2c_data = {
 
 static struct i2c_board_info mx1ads_i2c_devices[] = {
 	{
-		I2C_BOARD_INFO("pcf857x", 0x22),
-		.type = "pcf8575",
+		I2C_BOARD_INFO("pcf8575", 0x22),
 		.platform_data = &pcf857x_data[0],
 	}, {
-		I2C_BOARD_INFO("pcf857x", 0x24),
-		.type = "pcf8575",
+		I2C_BOARD_INFO("pcf8575", 0x24),
 		.platform_data = &pcf857x_data[1],
 	},
 };
diff --git a/arch/arm/mach-mx2/eukrea_cpuimx27.c b/arch/arm/mach-mx2/eukrea_cpuimx27.c
index a2c4181892c..7b187606682 100644
--- a/arch/arm/mach-mx2/eukrea_cpuimx27.c
+++ b/arch/arm/mach-mx2/eukrea_cpuimx27.c
@@ -135,8 +135,7 @@ static struct imxi2c_platform_data eukrea_cpuimx27_i2c_1_data = {
 
 static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
 	{
-		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
-		.type = "pcf8563"
+		I2C_BOARD_INFO("pcf8563", 0x51),
 	},
 };
 
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index 638d078304c..9a3483c8f58 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -186,17 +186,13 @@ static struct at24_platform_data board_eeprom = {
 };
 
 static struct i2c_board_info pcm038_i2c_devices[] = {
-	[0] = {
+	{
 		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
 		.platform_data = &board_eeprom,
-	},
-	[1] = {
-		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
-		.type = "pcf8563"
-	},
-	[2] = {
+	}, {
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	}, {
 		I2C_BOARD_INFO("lm75", 0x4a),
-		.type = "lm75"
 	}
 };
 
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index 1b9140e2303..b1b3282d15d 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -339,8 +339,7 @@ static struct i2c_board_info pcm037_i2c_devices[] = {
 		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
 		.platform_data = &board_eeprom,
 	}, {
-		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
-		.type = "pcf8563",
+		I2C_BOARD_INFO("pcf8563", 0x51),
 	}
 };
 
diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/pcm043.c
index 7c7d3cc07b8..e43276ea3b7 100644
--- a/arch/arm/mach-mx3/pcm043.c
+++ b/arch/arm/mach-mx3/pcm043.c
@@ -133,8 +133,7 @@ static struct i2c_board_info pcm043_i2c_devices[] = {
 		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
 		.platform_data = &board_eeprom,
 	}, {
-		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
-		.type = "pcf8563",
+		I2C_BOARD_INFO("pcf8563", 0x51),
 	}
 };
 #endif
-- 
cgit v1.2.3


From c372a5cf4cde161c7f59bbe7a9ebcfce9cb2c2f8 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Thu, 25 Jun 2009 12:37:16 +0200
Subject: ARM: MX3: add ckil clock

The CKIL clock source is used by the upcoming RTC driver, so we need
to export it.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/clock.c | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 2b29491c22b..4742554e996 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -403,6 +403,11 @@ static unsigned long clk_ckih_get_rate(struct clk *clk)
 	return ckih_rate;
 }
 
+static unsigned long clk_ckil_get_rate(struct clk *clk)
+{
+	return CKIL_CLK_FREQ;
+}
+
 static struct clk ckih_clk = {
 	.get_rate = clk_ckih_get_rate,
 };
@@ -509,6 +514,7 @@ DEFINE_CLOCK(usb_clk1,    0, NULL,          0, usb_get_rate, NULL, &usb_pll_clk)
 DEFINE_CLOCK(nfc_clk,     0, NULL,          0, nfc_get_rate, NULL, &ahb_clk);
 DEFINE_CLOCK(scc_clk,     0, NULL,          0, NULL, NULL, &ipg_clk);
 DEFINE_CLOCK(ipg_clk,     0, NULL,          0, ipg_get_rate, NULL, &ahb_clk);
+DEFINE_CLOCK(ckil_clk,    0, NULL,          0, clk_ckil_get_rate, NULL, NULL);
 
 #define _REGISTER_CLOCK(d, n, c) \
 	{ \
@@ -566,6 +572,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "iim", iim_clk)
 	_REGISTER_CLOCK(NULL, "mpeg4", mpeg4_clk)
 	_REGISTER_CLOCK(NULL, "mbx", mbx_clk)
+	_REGISTER_CLOCK("mxc_rtc", NULL, ckil_clk)
 };
 
 int __init mx31_clocks_init(unsigned long fref)
-- 
cgit v1.2.3


From 12b8eb865285c95d6e2c02555f066e3f949e090d Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 25 May 2009 10:50:52 +0200
Subject: MXC: use variable for irq controller base in entry-macro.S

This allows us to determine the irq controller base address
on runtime.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/entry-macro.S | 3 ++-
 arch/arm/plat-mxc/irq.c                      | 2 +-
 2 files changed, 3 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
index 5f01d60da84..7cf290efe76 100644
--- a/arch/arm/plat-mxc/include/mach/entry-macro.S
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
@@ -18,7 +18,8 @@
 	.endm
 
 	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =AVIC_IO_ADDRESS(AVIC_BASE_ADDR)
+	ldr	\base, =avic_base
+	ldr	\base, [\base]
 #ifdef CONFIG_MXC_IRQ_PRIOR
 	ldr	r4, [\base, #AVIC_NIMASK]
 #endif
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index 618a8b24ed1..778ddfe57d8 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -44,7 +44,7 @@
 #define AVIC_FIPNDH		0x60	/* fast int pending high */
 #define AVIC_FIPNDL		0x64	/* fast int pending low */
 
-static void __iomem *avic_base;
+void __iomem *avic_base;
 
 int imx_irq_set_priority(unsigned char irq, unsigned char prio)
 {
-- 
cgit v1.2.3


From fc2a9f0bc7f6dd4966dc57fb98b8697c83b6d035 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Wed, 27 May 2009 18:09:54 +0200
Subject: MXC: i.MX25 timer support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/time.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 7e71bb6270e..59e33a3bf7f 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -47,7 +47,7 @@
 #define MX2_TSTAT_CAPT		(1 << 1)
 #define MX2_TSTAT_COMP		(1 << 0)
 
-/* MX31, MX35 */
+/* MX31, MX35, MX25 */
 #define MX3_TCTL_WAITEN		(1 << 3)
 #define MX3_TCTL_CLK_IPG	(1 << 6)
 #define MX3_TCTL_FRR		(1 << 9)
@@ -66,7 +66,7 @@ static inline void gpt_irq_disable(void)
 {
 	unsigned int tmp;
 
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		__raw_writel(0, timer_base + MX3_IR);
 	else {
 		tmp = __raw_readl(timer_base + MXC_TCTL);
@@ -76,7 +76,7 @@ static inline void gpt_irq_disable(void)
 
 static inline void gpt_irq_enable(void)
 {
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		__raw_writel(1<<0, timer_base + MX3_IR);
 	else {
 		__raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN,
@@ -90,7 +90,7 @@ static void gpt_irq_acknowledge(void)
 		__raw_writel(0, timer_base + MX1_2_TSTAT);
 	if (cpu_is_mx2())
 		__raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP, timer_base + MX1_2_TSTAT);
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		__raw_writel(MX3_TSTAT_OF1, timer_base + MX3_TSTAT);
 }
 
@@ -117,7 +117,7 @@ static int __init mxc_clocksource_init(struct clk *timer_clk)
 {
 	unsigned int c = clk_get_rate(timer_clk);
 
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		clocksource_mxc.read = mx3_get_cycles;
 
 	clocksource_mxc.mult = clocksource_hz2mult(c,
@@ -180,7 +180,7 @@ static void mxc_set_mode(enum clock_event_mode mode,
 
 	if (mode != clockevent_mode) {
 		/* Set event time into far-far future */
-		if (cpu_is_mx3())
+		if (cpu_is_mx3() || cpu_is_mx25())
 			__raw_writel(__raw_readl(timer_base + MX3_TCN) - 3,
 					timer_base + MX3_TCMP);
 		else
@@ -233,7 +233,7 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
 	struct clock_event_device *evt = &clockevent_mxc;
 	uint32_t tstat;
 
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		tstat = __raw_readl(timer_base + MX3_TSTAT);
 	else
 		tstat = __raw_readl(timer_base + MX1_2_TSTAT);
@@ -264,7 +264,7 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
 {
 	unsigned int c = clk_get_rate(timer_clk);
 
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		clockevent_mxc.set_next_event = mx3_set_next_event;
 
 	clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
@@ -296,7 +296,7 @@ void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
 	__raw_writel(0, timer_base + MXC_TCTL);
 	__raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
 
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		tctl_val = MX3_TCTL_CLK_IPG | MX3_TCTL_FRR | MX3_TCTL_WAITEN | MXC_TCTL_TEN;
 	else
 		tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
-- 
cgit v1.2.3


From 6134b2cbb0e24f897fd1063745638397809fca29 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 4 Jun 2009 11:16:22 +0200
Subject: iomux-v3: Allow for a runtime base address

also, check for a valid pad_ctrl_ofs before changing the
pad control register.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/mm.c                    |  2 ++
 arch/arm/plat-mxc/include/mach/iomux-v3.h |  5 +++++
 arch/arm/plat-mxc/iomux-v3.c              | 15 ++++++++++-----
 3 files changed, 17 insertions(+), 5 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index c327172159c..ad5a1122d76 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -30,6 +30,7 @@
 
 #include <mach/common.h>
 #include <mach/hardware.h>
+#include <mach/iomux-v3.h>
 
 /*!
  * @file mm.c
@@ -83,6 +84,7 @@ void __init mx31_map_io(void)
 void __init mx35_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX35);
+	mxc_iomux_v3_init(IO_ADDRESS(IOMUXC_BASE_ADDR));
 	mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
 
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
index cd06df9370c..a0fa4026546 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-v3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
@@ -113,5 +113,10 @@ void mxc_iomux_v3_release_pad(struct pad_desc *pad);
  */
 void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count);
 
+/*
+ * Initialise the iomux controller
+ */
+void mxc_iomux_v3_init(void __iomem *iomux_v3_base);
+
 #endif /* __MACH_IOMUX_V3_H__*/
 
diff --git a/arch/arm/plat-mxc/iomux-v3.c b/arch/arm/plat-mxc/iomux-v3.c
index 77a078f9513..851ca99bf1b 100644
--- a/arch/arm/plat-mxc/iomux-v3.c
+++ b/arch/arm/plat-mxc/iomux-v3.c
@@ -29,7 +29,7 @@
 #include <asm/mach/map.h>
 #include <mach/iomux-v3.h>
 
-#define IOMUX_BASE	IO_ADDRESS(IOMUXC_BASE_ADDR)
+static void __iomem *base;
 
 static unsigned long iomux_v3_pad_alloc_map[0x200 / BITS_PER_LONG];
 
@@ -45,14 +45,14 @@ int mxc_iomux_v3_setup_pad(struct pad_desc *pad)
 	if (test_and_set_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map))
 		return -EBUSY;
 	if (pad->mux_ctrl_ofs)
-		__raw_writel(pad->mux_mode, IOMUX_BASE + pad->mux_ctrl_ofs);
+		__raw_writel(pad->mux_mode, base + pad->mux_ctrl_ofs);
 
 	if (pad->select_input_ofs)
 		__raw_writel(pad->select_input,
-				IOMUX_BASE + pad->select_input_ofs);
+				base + pad->select_input_ofs);
 
-	if (!(pad->pad_ctrl & NO_PAD_CTRL))
-		__raw_writel(pad->pad_ctrl, IOMUX_BASE + pad->pad_ctrl_ofs);
+	if (!(pad->pad_ctrl & NO_PAD_CTRL) && pad->pad_ctrl_ofs)
+		__raw_writel(pad->pad_ctrl, base + pad->pad_ctrl_ofs);
 	return 0;
 }
 EXPORT_SYMBOL(mxc_iomux_v3_setup_pad);
@@ -96,3 +96,8 @@ void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count)
 	}
 }
 EXPORT_SYMBOL(mxc_iomux_v3_release_multiple_pads);
+
+void mxc_iomux_v3_init(void __iomem *iomux_v3_base)
+{
+	base = iomux_v3_base;
+}
-- 
cgit v1.2.3


From a058cbc17901108de9179dccdb29dff0e00c79fe Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 19 Jun 2009 11:08:07 +0200
Subject: mxc pwm: add mx25 support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/pwm.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index 42dd17b89ff..5cdbd605ac0 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -32,6 +32,7 @@
 #define MX3_PWMPR                 0x10    /* PWM Period Register */
 #define MX3_PWMCR_PRESCALER(x)    (((x - 1) & 0xFFF) << 4)
 #define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16)
+#define MX3_PWMCR_CLKSRC_IPG      (1 << 16)
 #define MX3_PWMCR_EN              (1 << 0)
 
 
@@ -55,9 +56,11 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
 	if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
 		return -EINVAL;
 
-	if (cpu_is_mx27() || cpu_is_mx3()) {
+	if (cpu_is_mx27() || cpu_is_mx3() || cpu_is_mx25()) {
 		unsigned long long c;
 		unsigned long period_cycles, duty_cycles, prescale;
+		u32 cr;
+
 		c = clk_get_rate(pwm->clk);
 		c = c * period_ns;
 		do_div(c, 1000000000);
@@ -72,9 +75,15 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
 
 		writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR);
 		writel(period_cycles, pwm->mmio_base + MX3_PWMPR);
-		writel(MX3_PWMCR_PRESCALER(prescale) |
-			MX3_PWMCR_CLKSRC_IPG_HIGH | MX3_PWMCR_EN,
-			pwm->mmio_base + MX3_PWMCR);
+
+		cr = MX3_PWMCR_PRESCALER(prescale) | MX3_PWMCR_EN;
+
+		if (cpu_is_mx25())
+			cr |= MX3_PWMCR_CLKSRC_IPG;
+		else
+			cr |= MX3_PWMCR_CLKSRC_IPG_HIGH;
+
+		writel(cr, pwm->mmio_base + MX3_PWMCR);
 	} else if (cpu_is_mx1() || cpu_is_mx21()) {
 		/* The PWM subsystem allows for exact frequencies. However,
 		 * I cannot connect a scope on my device to the PWM line and
-- 
cgit v1.2.3


From 8c25c36f33157a2e2a1fcd60b6dc00feace80631 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 4 Jun 2009 11:32:12 +0200
Subject: Add i.MX25 support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/Makefile                            |   1 +
 arch/arm/mach-mx25/Kconfig                   |   5 +
 arch/arm/mach-mx25/Makefile                  |   2 +
 arch/arm/mach-mx25/Makefile.boot             |   3 +
 arch/arm/mach-mx25/clock.c                   | 219 +++++++++++++++
 arch/arm/mach-mx25/devices.c                 | 402 +++++++++++++++++++++++++++
 arch/arm/mach-mx25/devices.h                 |  19 ++
 arch/arm/mach-mx25/mm.c                      |  76 +++++
 arch/arm/plat-mxc/Kconfig                    |   8 +
 arch/arm/plat-mxc/gpio.c                     |   2 +-
 arch/arm/plat-mxc/include/mach/common.h      |   3 +
 arch/arm/plat-mxc/include/mach/debug-macro.S |   9 +
 arch/arm/plat-mxc/include/mach/hardware.h    |   4 +
 arch/arm/plat-mxc/include/mach/irqs.h        |   2 +
 arch/arm/plat-mxc/include/mach/memory.h      |   2 +
 arch/arm/plat-mxc/include/mach/mx25.h        |  44 +++
 arch/arm/plat-mxc/include/mach/mxc.h         |  13 +
 arch/arm/plat-mxc/include/mach/timex.h       |   2 +
 arch/arm/plat-mxc/include/mach/uncompress.h  |   1 +
 19 files changed, 816 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-mx25/Kconfig
 create mode 100644 arch/arm/mach-mx25/Makefile
 create mode 100644 arch/arm/mach-mx25/Makefile.boot
 create mode 100644 arch/arm/mach-mx25/clock.c
 create mode 100644 arch/arm/mach-mx25/devices.c
 create mode 100644 arch/arm/mach-mx25/devices.h
 create mode 100644 arch/arm/mach-mx25/mm.c
 create mode 100644 arch/arm/plat-mxc/include/mach/mx25.h

(limited to 'arch/arm')

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c877d6df23d..95ba3c5ca14 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -135,6 +135,7 @@ machine-$(CONFIG_ARCH_MSM)		:= msm
 machine-$(CONFIG_ARCH_MV78XX0)		:= mv78xx0
 machine-$(CONFIG_ARCH_MX1)		:= mx1
 machine-$(CONFIG_ARCH_MX2)		:= mx2
+machine-$(CONFIG_ARCH_MX25)		:= mx25
 machine-$(CONFIG_ARCH_MX3)		:= mx3
 machine-$(CONFIG_ARCH_NETX)		:= netx
 machine-$(CONFIG_ARCH_NS9XXX)		:= ns9xxx
diff --git a/arch/arm/mach-mx25/Kconfig b/arch/arm/mach-mx25/Kconfig
new file mode 100644
index 00000000000..14c918bad52
--- /dev/null
+++ b/arch/arm/mach-mx25/Kconfig
@@ -0,0 +1,5 @@
+if ARCH_MX25
+
+comment "MX25 platforms:"
+
+endif
diff --git a/arch/arm/mach-mx25/Makefile b/arch/arm/mach-mx25/Makefile
new file mode 100644
index 00000000000..5471086d5e1
--- /dev/null
+++ b/arch/arm/mach-mx25/Makefile
@@ -0,0 +1,2 @@
+obj-y				:= mm.o devices.o
+obj-$(CONFIG_ARCH_MX25)		+= clock.o
diff --git a/arch/arm/mach-mx25/Makefile.boot b/arch/arm/mach-mx25/Makefile.boot
new file mode 100644
index 00000000000..e1dd366f836
--- /dev/null
+++ b/arch/arm/mach-mx25/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y	:= 0x80008000
+params_phys-y	:= 0x80000100
+initrd_phys-y	:= 0x80800000
diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c
new file mode 100644
index 00000000000..ef26951a527
--- /dev/null
+++ b/arch/arm/mach-mx25/clock.c
@@ -0,0 +1,219 @@
+/*
+ * Copyright (C) 2009 by Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/clkdev.h>
+
+#include <mach/clock.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/mx25.h>
+
+#define CRM_BASE	MX25_IO_ADDRESS(MX25_CRM_BASE_ADDR)
+
+#define CCM_MPCTL	0x00
+#define CCM_UPCTL	0x04
+#define CCM_CCTL	0x08
+#define CCM_CGCR0	0x0C
+#define CCM_CGCR1	0x10
+#define CCM_CGCR2	0x14
+#define CCM_PCDR0	0x18
+#define CCM_PCDR1	0x1C
+#define CCM_PCDR2	0x20
+#define CCM_PCDR3	0x24
+#define CCM_RCSR	0x28
+#define CCM_CRDR	0x2C
+#define CCM_DCVR0	0x30
+#define CCM_DCVR1	0x34
+#define CCM_DCVR2	0x38
+#define CCM_DCVR3	0x3c
+#define CCM_LTR0	0x40
+#define CCM_LTR1	0x44
+#define CCM_LTR2	0x48
+#define CCM_LTR3	0x4c
+
+static unsigned long get_rate_mpll(void)
+{
+	ulong mpctl = __raw_readl(CRM_BASE + CCM_MPCTL);
+
+	return mxc_decode_pll(mpctl, 24000000);
+}
+
+static unsigned long get_rate_upll(void)
+{
+	ulong mpctl = __raw_readl(CRM_BASE + CCM_UPCTL);
+
+	return mxc_decode_pll(mpctl, 24000000);
+}
+
+unsigned long get_rate_arm(struct clk *clk)
+{
+	unsigned long cctl = readl(CRM_BASE + CCM_CCTL);
+	unsigned long rate = get_rate_mpll();
+
+	if (cctl & (1 << 14))
+		rate = (rate * 3) >> 1;
+
+	return rate / ((cctl >> 30) + 1);
+}
+
+static unsigned long get_rate_ahb(struct clk *clk)
+{
+	unsigned long cctl = readl(CRM_BASE + CCM_CCTL);
+
+	return get_rate_arm(NULL) / (((cctl >> 28) & 0x3) + 1);
+}
+
+static unsigned long get_rate_ipg(struct clk *clk)
+{
+	return get_rate_ahb(NULL) >> 1;
+}
+
+static unsigned long get_rate_per(int per)
+{
+	unsigned long ofs = (per & 0x3) * 8;
+	unsigned long reg = per & ~0x3;
+	unsigned long val = (readl(CRM_BASE + CCM_PCDR0 + reg) >> ofs) & 0x3f;
+	unsigned long fref;
+
+	if (readl(CRM_BASE + 0x64) & (1 << per))
+		fref = get_rate_upll();
+	else
+		fref = get_rate_ipg(NULL);
+
+	return fref / (val + 1);
+}
+
+static unsigned long get_rate_uart(struct clk *clk)
+{
+	return get_rate_per(15);
+}
+
+static unsigned long get_rate_i2c(struct clk *clk)
+{
+	return get_rate_per(6);
+}
+
+static unsigned long get_rate_nfc(struct clk *clk)
+{
+	return get_rate_per(8);
+}
+
+static unsigned long get_rate_otg(struct clk *clk)
+{
+	return 48000000; /* FIXME */
+}
+
+static int clk_cgcr_enable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg |= 1 << clk->enable_shift;
+	__raw_writel(reg, clk->enable_reg);
+
+	return 0;
+}
+
+static void clk_cgcr_disable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg &= ~(1 << clk->enable_shift);
+	__raw_writel(reg, clk->enable_reg);
+}
+
+#define DEFINE_CLOCK(name, i, er, es, gr, sr)		\
+	static struct clk name = {			\
+		.id		= i,			\
+		.enable_reg	= CRM_BASE + er,	\
+		.enable_shift	= es,			\
+		.get_rate	= gr,			\
+		.set_rate	= sr,			\
+		.enable		= clk_cgcr_enable,	\
+		.disable	= clk_cgcr_disable,	\
+	}
+
+DEFINE_CLOCK(gpt_clk,    0, CCM_CGCR0,  5, get_rate_ipg, NULL);
+DEFINE_CLOCK(cspi1_clk,  0, CCM_CGCR1,  5, get_rate_ipg, NULL);
+DEFINE_CLOCK(cspi2_clk,  0, CCM_CGCR1,  6, get_rate_ipg, NULL);
+DEFINE_CLOCK(cspi3_clk,  0, CCM_CGCR1,  7, get_rate_ipg, NULL);
+DEFINE_CLOCK(uart1_clk,  0, CCM_CGCR2, 14, get_rate_uart, NULL);
+DEFINE_CLOCK(uart2_clk,  0, CCM_CGCR2, 15, get_rate_uart, NULL);
+DEFINE_CLOCK(uart3_clk,  0, CCM_CGCR2, 16, get_rate_uart, NULL);
+DEFINE_CLOCK(uart4_clk,  0, CCM_CGCR2, 17, get_rate_uart, NULL);
+DEFINE_CLOCK(uart5_clk,  0, CCM_CGCR2, 18, get_rate_uart, NULL);
+DEFINE_CLOCK(nfc_clk,    0, CCM_CGCR0,  8, get_rate_nfc, NULL);
+DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL);
+DEFINE_CLOCK(pwm1_clk,	 0, CCM_CGCR1, 31, get_rate_ipg, NULL);
+DEFINE_CLOCK(pwm2_clk,	 0, CCM_CGCR2,  0, get_rate_ipg, NULL);
+DEFINE_CLOCK(pwm3_clk,	 0, CCM_CGCR2,  1, get_rate_ipg, NULL);
+DEFINE_CLOCK(pwm4_clk,	 0, CCM_CGCR2,  2, get_rate_ipg, NULL);
+DEFINE_CLOCK(kpp_clk,	 0, CCM_CGCR1, 28, get_rate_ipg, NULL);
+DEFINE_CLOCK(tsc_clk,	 0, CCM_CGCR2, 13, get_rate_ipg, NULL);
+DEFINE_CLOCK(i2c_clk,	 0, CCM_CGCR0,  6, get_rate_i2c, NULL);
+
+#define _REGISTER_CLOCK(d, n, c)	\
+	{				\
+		.dev_id = d,		\
+		.con_id = n,		\
+		.clk = &c,		\
+	},
+
+static struct clk_lookup lookups[] = {
+	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
+	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
+	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+	_REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk)
+	_REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb", usbotg_clk)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
+	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
+	_REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
+	_REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
+	_REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
+	_REGISTER_CLOCK("mxc_pwm.0", NULL, pwm1_clk)
+	_REGISTER_CLOCK("mxc_pwm.1", NULL, pwm2_clk)
+	_REGISTER_CLOCK("mxc_pwm.2", NULL, pwm3_clk)
+	_REGISTER_CLOCK("mxc_pwm.3", NULL, pwm4_clk)
+	_REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk)
+	_REGISTER_CLOCK("mx25-adc", NULL, tsc_clk)
+	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
+	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk)
+	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk)
+};
+
+int __init mx25_clocks_init(unsigned long fref)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
+
+	mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
+
+	return 0;
+}
diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c
new file mode 100644
index 00000000000..eb12de1da42
--- /dev/null
+++ b/arch/arm/mach-mx25/devices.c
@@ -0,0 +1,402 @@
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <mach/mx25.h>
+#include <mach/irqs.h>
+
+static struct resource uart0[] = {
+	{
+		.start = 0x43f90000,
+		.end = 0x43f93fff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 45,
+		.end = 45,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_uart_device0 = {
+	.name = "imx-uart",
+	.id = 0,
+	.resource = uart0,
+	.num_resources = ARRAY_SIZE(uart0),
+};
+
+static struct resource uart1[] = {
+	{
+		.start = 0x43f94000,
+		.end = 0x43f97fff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 32,
+		.end = 32,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_uart_device1 = {
+	.name = "imx-uart",
+	.id = 1,
+	.resource = uart1,
+	.num_resources = ARRAY_SIZE(uart1),
+};
+
+static struct resource uart2[] = {
+	{
+		.start = 0x5000c000,
+		.end = 0x5000ffff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 18,
+		.end = 18,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_uart_device2 = {
+	.name = "imx-uart",
+	.id = 2,
+	.resource = uart2,
+	.num_resources = ARRAY_SIZE(uart2),
+};
+
+static struct resource uart3[] = {
+	{
+		.start = 0x50008000,
+		.end = 0x5000bfff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 5,
+		.end = 5,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_uart_device3 = {
+	.name = "imx-uart",
+	.id = 3,
+	.resource = uart3,
+	.num_resources = ARRAY_SIZE(uart3),
+};
+
+static struct resource uart4[] = {
+	{
+		.start = 0x5002c000,
+		.end = 0x5002ffff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 40,
+		.end = 40,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_uart_device4 = {
+	.name = "imx-uart",
+	.id = 4,
+	.resource = uart4,
+	.num_resources = ARRAY_SIZE(uart4),
+};
+
+#define MX25_OTG_BASE_ADDR 0x53FF4000
+
+static u64 otg_dmamask = DMA_BIT_MASK(32);
+
+static struct resource mxc_otg_resources[] = {
+	{
+		.start = MX25_OTG_BASE_ADDR,
+		.end = MX25_OTG_BASE_ADDR + 0x1ff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 37,
+		.end = 37,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_otg = {
+	.name = "mxc-ehci",
+	.id = 0,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+		.dma_mask = &otg_dmamask,
+	},
+	.resource = mxc_otg_resources,
+	.num_resources = ARRAY_SIZE(mxc_otg_resources),
+};
+
+/* OTG gadget device */
+struct platform_device otg_udc_device = {
+	.name = "fsl-usb2-udc",
+	.id   = -1,
+	.dev  = {
+		.dma_mask          = &otg_dmamask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+	.resource = mxc_otg_resources,
+	.num_resources = ARRAY_SIZE(mxc_otg_resources),
+};
+
+static u64 usbh2_dmamask = DMA_BIT_MASK(32);
+
+static struct resource mxc_usbh2_resources[] = {
+	{
+		.start = MX25_OTG_BASE_ADDR + 0x400,
+		.end = MX25_OTG_BASE_ADDR + 0x5ff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 35,
+		.end = 35,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_usbh2 = {
+	.name = "mxc-ehci",
+	.id = 1,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+		.dma_mask = &usbh2_dmamask,
+	},
+	.resource = mxc_usbh2_resources,
+	.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
+};
+
+static struct resource mxc_spi_resources0[] = {
+	{
+	       .start = 0x43fa4000,
+	       .end = 0x43fa7fff,
+	       .flags = IORESOURCE_MEM,
+	}, {
+	       .start = 14,
+	       .end = 14,
+	       .flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_spi_device0 = {
+	.name = "spi_imx",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_spi_resources0),
+	.resource = mxc_spi_resources0,
+};
+
+static struct resource mxc_spi_resources1[] = {
+	{
+	       .start = 0x50010000,
+	       .end = 0x50013fff,
+	       .flags = IORESOURCE_MEM,
+	}, {
+	       .start = 13,
+	       .end = 13,
+	       .flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_spi_device1 = {
+	.name = "spi_imx",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(mxc_spi_resources1),
+	.resource = mxc_spi_resources1,
+};
+
+static struct resource mxc_spi_resources2[] = {
+	{
+	       .start = 0x50004000,
+	       .end = 0x50007fff,
+	       .flags = IORESOURCE_MEM,
+	}, {
+	       .start = 0,
+	       .end = 0,
+	       .flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_spi_device2 = {
+	.name = "spi_imx",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(mxc_spi_resources2),
+	.resource = mxc_spi_resources2,
+};
+
+static struct resource mxc_pwm_resources0[] = {
+	{
+		.start	= 0x53fe0000,
+		.end	= 0x53fe3fff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start   = 26,
+		.end     = 26,
+		.flags   = IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_pwm_device0 = {
+	.name = "mxc_pwm",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_pwm_resources0),
+	.resource = mxc_pwm_resources0,
+};
+
+static struct resource mxc_pwm_resources1[] = {
+	{
+		.start	= 0x53fa0000,
+		.end	= 0x53fa3fff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start   = 36,
+		.end     = 36,
+		.flags   = IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_pwm_device1 = {
+	.name = "mxc_pwm",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(mxc_pwm_resources1),
+	.resource = mxc_pwm_resources1,
+};
+
+static struct resource mxc_pwm_resources2[] = {
+	{
+		.start	= 0x53fa8000,
+		.end	= 0x53fabfff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start   = 41,
+		.end     = 41,
+		.flags   = IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_pwm_device2 = {
+	.name = "mxc_pwm",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(mxc_pwm_resources2),
+	.resource = mxc_pwm_resources2,
+};
+
+static struct resource mxc_keypad_resources[] = {
+	{
+		.start	= 0x43fa8000,
+		.end	= 0x43fabfff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start   = 24,
+		.end     = 24,
+		.flags   = IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_keypad_device = {
+	.name = "mxc-keypad",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(mxc_keypad_resources),
+	.resource = mxc_keypad_resources,
+};
+
+static struct resource mxc_pwm_resources3[] = {
+	{
+		.start	= 0x53fc8000,
+		.end	= 0x53fcbfff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start   = 42,
+		.end     = 42,
+		.flags   = IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_pwm_device3 = {
+	.name = "mxc_pwm",
+	.id = 3,
+	.num_resources = ARRAY_SIZE(mxc_pwm_resources3),
+	.resource = mxc_pwm_resources3,
+};
+
+static struct resource mxc_i2c_1_resources[] = {
+	{
+		.start	= 0x43f80000,
+		.end	= 0x43f83fff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= 3,
+		.end	= 3,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_i2c_device0 = {
+	.name = "imx-i2c",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_i2c_1_resources),
+	.resource = mxc_i2c_1_resources,
+};
+
+static struct resource mxc_i2c_2_resources[] = {
+	{
+		.start	= 0x43f98000,
+		.end	= 0x43f9bfff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= 4,
+		.end	= 4,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_i2c_device1 = {
+	.name = "imx-i2c",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(mxc_i2c_2_resources),
+	.resource = mxc_i2c_2_resources,
+};
+
+static struct resource mxc_i2c_3_resources[] = {
+	{
+		.start	= 0x43f84000,
+		.end	= 0x43f87fff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= 10,
+		.end	= 10,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_i2c_device2 = {
+	.name = "imx-i2c",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(mxc_i2c_3_resources),
+	.resource = mxc_i2c_3_resources,
+};
+
+static struct mxc_gpio_port imx_gpio_ports[] = {
+	{
+		.chip.label = "gpio-0",
+		.base = (void __iomem *)MX25_GPIO1_BASE_ADDR_VIRT,
+		.irq = 52,
+		.virtual_irq_start = MXC_GPIO_IRQ_START,
+	}, {
+		.chip.label = "gpio-1",
+		.base = (void __iomem *)MX25_GPIO2_BASE_ADDR_VIRT,
+		.irq = 51,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
+	}, {
+		.chip.label = "gpio-2",
+		.base = (void __iomem *)MX25_GPIO3_BASE_ADDR_VIRT,
+		.irq = 16,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
+	}, {
+		.chip.label = "gpio-3",
+		.base = (void __iomem *)MX25_GPIO4_BASE_ADDR_VIRT,
+		.irq = 23,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
+	}
+};
+
+int __init mxc_register_gpios(void)
+{
+	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
+}
+
diff --git a/arch/arm/mach-mx25/devices.h b/arch/arm/mach-mx25/devices.h
new file mode 100644
index 00000000000..fe6bf88ad1d
--- /dev/null
+++ b/arch/arm/mach-mx25/devices.h
@@ -0,0 +1,19 @@
+extern struct platform_device mxc_uart_device0;
+extern struct platform_device mxc_uart_device1;
+extern struct platform_device mxc_uart_device2;
+extern struct platform_device mxc_uart_device3;
+extern struct platform_device mxc_uart_device4;
+extern struct platform_device mxc_otg;
+extern struct platform_device otg_udc_device;
+extern struct platform_device mxc_usbh2;
+extern struct platform_device mxc_spi_device0;
+extern struct platform_device mxc_spi_device1;
+extern struct platform_device mxc_spi_device2;
+extern struct platform_device mxc_pwm_device0;
+extern struct platform_device mxc_pwm_device1;
+extern struct platform_device mxc_pwm_device2;
+extern struct platform_device mxc_pwm_device3;
+extern struct platform_device mxc_keypad_device;
+extern struct platform_device mxc_i2c_device0;
+extern struct platform_device mxc_i2c_device1;
+extern struct platform_device mxc_i2c_device2;
diff --git a/arch/arm/mach-mx25/mm.c b/arch/arm/mach-mx25/mm.c
new file mode 100644
index 00000000000..a7e587ff3e9
--- /dev/null
+++ b/arch/arm/mach-mx25/mm.c
@@ -0,0 +1,76 @@
+/*
+ *  Copyright (C) 1999,2000 Arm Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *    - add MX31 specific definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/err.h>
+
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/mx25.h>
+#include <mach/iomux-v3.h>
+
+/*
+ * This table defines static virtual address mappings for I/O regions.
+ * These are the mappings common across all MX3 boards.
+ */
+static struct map_desc mxc_io_desc[] __initdata = {
+	{
+		.virtual	= MX25_AVIC_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MX25_AVIC_BASE_ADDR),
+		.length		= MX25_AVIC_SIZE,
+		.type		= MT_DEVICE_NONSHARED
+	}, {
+		.virtual	= MX25_AIPS1_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MX25_AIPS1_BASE_ADDR),
+		.length		= MX25_AIPS1_SIZE,
+		.type		= MT_DEVICE_NONSHARED
+	}, {
+		.virtual	= MX25_AIPS2_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MX25_AIPS2_BASE_ADDR),
+		.length		= MX25_AIPS2_SIZE,
+		.type		= MT_DEVICE_NONSHARED
+	},
+};
+
+/*
+ * This function initializes the memory map. It is called during the
+ * system startup to create static physical to virtual memory mappings
+ * for the IO modules.
+ */
+void __init mx25_map_io(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX25);
+	mxc_iomux_v3_init(MX25_IO_ADDRESS(MX25_IOMUXC_BASE_ADDR));
+	mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR));
+
+	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
+
+void __init mx25_init_irq(void)
+{
+	mxc_init_irq((void __iomem *)MX25_AVIC_BASE_ADDR_VIRT);
+}
+
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 0617c19f85c..e342a2e6160 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -20,6 +20,13 @@ config ARCH_MX2
 	help
 	  This enables support for systems based on the Freescale i.MX2 family
 
+config ARCH_MX25
+	bool "MX25-based"
+	select CPU_ARM926T
+	select COMMON_CLKDEV
+	help
+	  This enables support for systems based on the Freescale i.MX25 family
+
 config ARCH_MX3
 	bool "MX3-based"
 	select CPU_V6
@@ -32,6 +39,7 @@ endchoice
 source "arch/arm/mach-mx1/Kconfig"
 source "arch/arm/mach-mx2/Kconfig"
 source "arch/arm/mach-mx3/Kconfig"
+source "arch/arm/mach-mx25/Kconfig"
 
 endmenu
 
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index f0315edb3eb..cfc4a8b43e6 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -297,7 +297,7 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
 		/* its a serious configuration bug when it fails */
 		BUG_ON( gpiochip_add(&port[i].chip) < 0 );
 
-		if (cpu_is_mx1() || cpu_is_mx3()) {
+		if (cpu_is_mx1() || cpu_is_mx3() || cpu_is_mx25()) {
 			/* setup one handler for each entry */
 			set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler);
 			set_irq_data(port[i].irq, &port[i]);
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index cd8f215c1ad..4e7af741239 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -16,18 +16,21 @@ struct clk;
 
 extern void mx1_map_io(void);
 extern void mx21_map_io(void);
+extern void mx25_map_io(void);
 extern void mx27_map_io(void);
 extern void mx31_map_io(void);
 extern void mx35_map_io(void);
 extern void mxc_init_irq(void __iomem *);
 extern void mx1_init_irq(void);
 extern void mx21_init_irq(void);
+extern void mx25_init_irq(void);
 extern void mx27_init_irq(void);
 extern void mx31_init_irq(void);
 extern void mx35_init_irq(void);
 extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
 extern int mx1_clocks_init(unsigned long fref);
 extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
+extern int mx25_clocks_init(unsigned long fref);
 extern int mx27_clocks_init(unsigned long fref);
 extern int mx31_clocks_init(unsigned long fref);
 extern int mx35_clocks_init(void);
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 4f85acd74af..bf683de56b7 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -17,6 +17,15 @@
 #define UART_VADDR	IO_ADDRESS(UART1_BASE_ADDR)
 #endif
 
+#ifdef CONFIG_ARCH_MX25
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
+#endif
+#include <mach/mx25.h>
+#define UART_PADDR	UART1_BASE_ADDR
+#define UART_VADDR	MX25_AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+#endif
+
 #ifdef CONFIG_ARCH_MX2
 #ifdef UART_PADDR
 #error "CONFIG_DEBUG_LL is incompatible with multiple archs"
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index 42e4ee37ca1..569af3239c3 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -42,6 +42,10 @@
 # include <mach/mx1.h>
 #endif
 
+#ifdef CONFIG_ARCH_MX25
+# include <mach/mx25.h>
+#endif
+
 #include <mach/mxc.h>
 
 #endif /* __ASM_ARCH_MXC_HARDWARE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index 518a36504b8..f39e016c1cc 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -24,6 +24,8 @@
 #define MXC_GPIO_IRQS		(32 * 6)
 #elif defined CONFIG_ARCH_MX3
 #define MXC_GPIO_IRQS		(32 * 3)
+#elif defined CONFIG_ARCH_MX25
+#define MXC_GPIO_IRQS		(32 * 4)
 #endif
 
 /*
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index 6065e00176e..42db7394111 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -22,6 +22,8 @@
 #endif
 #elif defined CONFIG_ARCH_MX3
 #define PHYS_OFFSET		UL(0x80000000)
+#elif defined CONFIG_ARCH_MX25
+#define PHYS_OFFSET		UL(0x80000000)
 #endif
 
 #if defined(CONFIG_MX1_VIDEO)
diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h
new file mode 100644
index 00000000000..ec64bd9a8ab
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx25.h
@@ -0,0 +1,44 @@
+#ifndef __MACH_MX25_H__
+#define __MACH_MX25_H__
+
+#define MX25_AIPS1_BASE_ADDR		0x43F00000
+#define MX25_AIPS1_BASE_ADDR_VIRT	0xFC000000
+#define MX25_AIPS1_SIZE			SZ_1M
+#define MX25_AIPS2_BASE_ADDR		0x53F00000
+#define MX25_AIPS2_BASE_ADDR_VIRT	0xFC200000
+#define MX25_AIPS2_SIZE			SZ_1M
+#define MX25_AVIC_BASE_ADDR		0x68000000
+#define MX25_AVIC_BASE_ADDR_VIRT	0xFC400000
+#define MX25_AVIC_SIZE			SZ_1M
+
+#define MX25_IOMUXC_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0xac000)
+
+#define MX25_CRM_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0x80000)
+#define MX25_GPT1_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0x90000)
+#define MX25_WDOG_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0xdc000)
+
+#define MX25_GPIO1_BASE_ADDR_VIRT	(MX25_AIPS2_BASE_ADDR_VIRT + 0xcc000)
+#define MX25_GPIO2_BASE_ADDR_VIRT	(MX25_AIPS2_BASE_ADDR_VIRT + 0xd0000)
+#define MX25_GPIO3_BASE_ADDR_VIRT	(MX25_AIPS2_BASE_ADDR_VIRT + 0xa4000)
+#define MX25_GPIO4_BASE_ADDR_VIRT	(MX25_AIPS2_BASE_ADDR_VIRT + 0x9c000)
+
+#define MX25_AIPS1_IO_ADDRESS(x)  \
+	(((x) - MX25_AIPS1_BASE_ADDR) + MX25_AIPS1_BASE_ADDR_VIRT)
+#define MX25_AIPS2_IO_ADDRESS(x)  \
+	(((x) - MX25_AIPS2_BASE_ADDR) + MX25_AIPS2_BASE_ADDR_VIRT)
+#define MX25_AVIC_IO_ADDRESS(x)  \
+	(((x) - MX25_AVIC_BASE_ADDR) + MX25_AVIC_BASE_ADDR_VIRT)
+
+#define __in_range(addr, name)	((addr) >= name##_BASE_ADDR && (addr) < name##_BASE_ADDR + name##_SIZE)
+
+#define MX25_IO_ADDRESS(x)					\
+	(void __force __iomem *)				\
+	(__in_range(x, MX25_AIPS1) ? MX25_AIPS1_IO_ADDRESS(x) :	\
+	__in_range(x, MX25_AIPS2) ? MX25_AIPS2_IO_ADDRESS(x) :	\
+	__in_range(x, MX25_AVIC) ? MX25_AVIC_IO_ADDRESS(x) :	\
+	0xDEADBEEF)
+
+#define UART1_BASE_ADDR			0x43f90000
+#define UART2_BASE_ADDR			0x43f94000
+
+#endif /* __MACH_MX25_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 5fa2a07f4ea..882b816729b 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -26,6 +26,7 @@
 
 #define MXC_CPU_MX1		1
 #define MXC_CPU_MX21		21
+#define MXC_CPU_MX25		25
 #define MXC_CPU_MX27		27
 #define MXC_CPU_MX31		31
 #define MXC_CPU_MX35		35
@@ -58,6 +59,18 @@ extern unsigned int __mxc_cpu_type;
 # define cpu_is_mx21()		(0)
 #endif
 
+#ifdef CONFIG_ARCH_MX25
+# ifdef mxc_cpu_type
+#  undef mxc_cpu_type
+#  define mxc_cpu_type __mxc_cpu_type
+# else
+#  define mxc_cpu_type MXC_CPU_MX25
+# endif
+# define cpu_is_mx25()		(mxc_cpu_type == MXC_CPU_MX25)
+#else
+# define cpu_is_mx25()		(0)
+#endif
+
 #ifdef CONFIG_MACH_MX27
 # ifdef mxc_cpu_type
 #  undef mxc_cpu_type
diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h
index 07b4a73c9d2..0707b7d5b5c 100644
--- a/arch/arm/plat-mxc/include/mach/timex.h
+++ b/arch/arm/plat-mxc/include/mach/timex.h
@@ -26,6 +26,8 @@
 #define CLOCK_TICK_RATE		13300000
 #elif defined CONFIG_ARCH_MX3
 #define CLOCK_TICK_RATE		16625000
+#elif defined CONFIG_ARCH_MX25
+#define CLOCK_TICK_RATE		16000000
 #endif
 
 #endif				/* __ASM_ARCH_MXC_TIMEX_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index 98c8a60214d..b6650e705e3 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -63,6 +63,7 @@ static void putc(int ch)
 #define flush() do { } while (0)
 
 #define MX1_UART1_BASE_ADDR	0x00206000
+#define MX25_UART1_BASE_ADDR	0x43f90000
 #define MX2X_UART1_BASE_ADDR	0x1000a000
 #define MX3X_UART1_BASE_ADDR	0x43F90000
 
-- 
cgit v1.2.3


From 635baf6b40ebaef683abf87d677467cba71a0d50 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 4 Jun 2009 11:32:46 +0200
Subject: Freescale i.MX25 PDK (3ds) board support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx25/Kconfig                  |  4 ++
 arch/arm/mach-mx25/Makefile                 |  1 +
 arch/arm/mach-mx25/mx25pdk.c                | 58 +++++++++++++++++++++++++++++
 arch/arm/plat-mxc/include/mach/uncompress.h |  3 ++
 4 files changed, 66 insertions(+)
 create mode 100644 arch/arm/mach-mx25/mx25pdk.c

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx25/Kconfig b/arch/arm/mach-mx25/Kconfig
index 14c918bad52..cc28f56eae8 100644
--- a/arch/arm/mach-mx25/Kconfig
+++ b/arch/arm/mach-mx25/Kconfig
@@ -2,4 +2,8 @@ if ARCH_MX25
 
 comment "MX25 platforms:"
 
+config MACH_MX25_3DS
+	select ARCH_MXC_IOMUX_V3
+	bool "Support MX25PDK (3DS) Platform"
+
 endif
diff --git a/arch/arm/mach-mx25/Makefile b/arch/arm/mach-mx25/Makefile
index 5471086d5e1..fe23836a9f3 100644
--- a/arch/arm/mach-mx25/Makefile
+++ b/arch/arm/mach-mx25/Makefile
@@ -1,2 +1,3 @@
 obj-y				:= mm.o devices.o
 obj-$(CONFIG_ARCH_MX25)		+= clock.o
+obj-$(CONFIG_MACH_MX25_3DS)	+= mx25pdk.o
diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mx25pdk.c
new file mode 100644
index 00000000000..92aa4fd19d9
--- /dev/null
+++ b/arch/arm/mach-mx25/mx25pdk.c
@@ -0,0 +1,58 @@
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/memory.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/mx25.h>
+#include <mach/mxc_nand.h>
+#include "devices.h"
+#include <mach/iomux-v3.h>
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct mxc_nand_platform_data nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static void __init mx25pdk_init(void)
+{
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxc_usbh2, NULL);
+	mxc_register_device(&mxc_nand_device, &nand_board_info);
+}
+
+
+static void __init mx25pdk_timer_init(void)
+{
+	mx25_clocks_init(26000000);
+}
+
+static struct sys_timer mx25pdk_timer = {
+	.init   = mx25pdk_timer_init,
+};
+
+MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
+	/* Maintainer: Freescale Semiconductor, Inc. */
+	.phys_io	= MX25_AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((MX25_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx25_map_io,
+	.init_irq       = mx25_init_irq,
+	.init_machine   = mx25pdk_init,
+	.timer          = &mx25pdk_timer,
+MACHINE_END
+
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index b6650e705e3..1e24499f20b 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -74,6 +74,9 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
 	case MACH_TYPE_SCB9328:
 		uart_base = MX1_UART1_BASE_ADDR;
 		break;
+	case MACH_TYPE_MX25_3DS:
+		uart_base = MX25_UART1_BASE_ADDR;
+		break;
 	case MACH_TYPE_IMX27LITE:
 	case MACH_TYPE_MX27_3DS:
 	case MACH_TYPE_MX27ADS:
-- 
cgit v1.2.3


From cf983c93aea2a6cd6de5b405b7506af7732f91d0 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Wed, 15 Jul 2009 09:31:15 +0200
Subject: fix mx35 wrong clock

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/clock-imx35.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index 4cf1849f552..1dbcdc07257 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -456,7 +456,7 @@ int __init mx35_clocks_init()
 	__raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2);
 	__raw_writel(0, CCM_BASE + CCM_CGR3);
 
-	mxc_timer_init(&ipg_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
+	mxc_timer_init(&gpt_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
 
 	return 0;
 }
-- 
cgit v1.2.3


From 8e5be212cba6675dc363a224ce4a98bb07039b4b Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= <LW@KARO-electronics.de>
Date: Wed, 15 Jul 2009 15:19:34 +0200
Subject: i.MX25 iomux definitions (corrected version)

Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/iomux-mx25.h | 517 ++++++++++++++++++++++++++++
 arch/arm/plat-mxc/include/mach/iomux.h      |   6 +
 2 files changed, 523 insertions(+)
 create mode 100644 arch/arm/plat-mxc/include/mach/iomux-mx25.h

(limited to 'arch/arm')

diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
new file mode 100644
index 00000000000..810c47f56e7
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
@@ -0,0 +1,517 @@
+/*
+ * arch/arm/plat-mxc/include/mach/iomux-mx25.h
+ *
+ * Copyright (C) 2009 by Lothar Wassmann <LW@KARO-electronics.de>
+ *
+ * based on arch/arm/mach-mx25/mx25_pins.h
+ *    Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * and
+ * arch/arm/plat-mxc/include/mach/iomux-mx35.h
+ *    Copyright (C, NO_PAD_CTRL) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __IOMUX_MX25_H__
+#define __IOMUX_MX25_H__
+
+#include <mach/iomux-v3.h>
+
+#ifndef GPIO_PORTA
+#error Please include mach/iomux.h
+#endif
+
+/*
+ *
+ * @brief MX25 I/O Pin List
+ *
+ * @ingroup GPIO_MX25
+ */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * IOMUX/PAD Bit field definitions
+ */
+
+#define MX25_PAD_A10__A10		IOMUX_PAD(0x000, 0x008, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A10__GPIO_4_0		IOMUX_PAD(0x000, 0x008, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A13__A13		IOMUX_PAD(0x22C, 0x00c, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A13__GPIO_4_1		IOMUX_PAD(0x22C, 0x00c, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A14__A14		IOMUX_PAD(0x230, 0x010, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A14__GPIO_2_0		IOMUX_PAD(0x230, 0x010, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A15__A15		IOMUX_PAD(0x234, 0x014, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A15__GPIO_2_1		IOMUX_PAD(0x234, 0x014, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A16__A16		IOMUX_PAD(0x000, 0x018, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A16__GPIO_2_2		IOMUX_PAD(0x000, 0x018, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A17__A17		IOMUX_PAD(0x238, 0x01c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A17__GPIO_2_3		IOMUX_PAD(0x238, 0x01c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A18__A18		IOMUX_PAD(0x23c, 0x020, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A18__GPIO_2_4		IOMUX_PAD(0x23c, 0x020, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A18__FEC_COL		IOMUX_PAD(0x23c, 0x020, 0x17, 0x504, 0, NO_PAD_CTL)
+
+#define MX25_PAD_A19__A19		IOMUX_PAD(0x240, 0x024, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A19__FEC_RX_ER		IOMUX_PAD(0x240, 0x024, 0x17, 0x518, 0, NO_PAD_CTL)
+#define MX25_PAD_A19__GPIO_2_5		IOMUX_PAD(0x240, 0x024, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A20__A20		IOMUX_PAD(0x244, 0x028, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A20__GPIO_2_6		IOMUX_PAD(0x244, 0x028, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A20__FEC_RDATA2	IOMUX_PAD(0x244, 0x028, 0x17, 0x50c, 0, NO_PAD_CTL)
+
+#define MX25_PAD_A21__A21		IOMUX_PAD(0x248, 0x02c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A21__GPIO_2_7		IOMUX_PAD(0x248, 0x02c, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A21__FEC_RDATA3	IOMUX_PAD(0x248, 0x02c, 0x17, 0x510, 0, NO_PAD_CTL)
+
+#define MX25_PAD_A22__A22		IOMUX_PAD(0x000, 0x030, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A22__GPIO_2_8		IOMUX_PAD(0x000, 0x030, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A23__A23		IOMUX_PAD(0x24c, 0x034, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A23__GPIO_2_9		IOMUX_PAD(0x24c, 0x034, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A24__A24		IOMUX_PAD(0x250, 0x038, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A24__GPIO_2_10		IOMUX_PAD(0x250, 0x038, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A24__FEC_RX_CLK	IOMUX_PAD(0x250, 0x038, 0x17, 0x514, 0, NO_PAD_CTL)
+
+#define MX25_PAD_A25__A25		IOMUX_PAD(0x254, 0x03c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A25__GPIO_2_11		IOMUX_PAD(0x254, 0x03c, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A25__FEC_CRS		IOMUX_PAD(0x254, 0x03c, 0x17, 0x508, 0, NO_PAD_CTL)
+
+#define MX25_PAD_EB0__EB0		IOMUX_PAD(0x258, 0x040, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_EB0__AUD4_TXD		IOMUX_PAD(0x258, 0x040, 0x14, 0x464, 0, NO_PAD_CTRL)
+#define MX25_PAD_EB0__GPIO_2_12		IOMUX_PAD(0x258, 0x040, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_EB1__EB1		IOMUX_PAD(0x25c, 0x044, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_EB1__AUD4_RXD		IOMUX_PAD(0x25c, 0x044, 0x14, 0x460, 0, NO_PAD_CTRL)
+#define MX25_PAD_EB1__GPIO_2_13		IOMUX_PAD(0x25c, 0x044, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_OE__OE			IOMUX_PAD(0x260, 0x048, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_OE__AUD4_TXC		IOMUX_PAD(0x260, 0x048, 0x14, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_OE__GPIO_2_14		IOMUX_PAD(0x260, 0x048, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CS0__CS0		IOMUX_PAD(0x000, 0x04c, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS0__GPIO_4_2		IOMUX_PAD(0x000, 0x04c, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CS1__CS1		IOMUX_PAD(0x000, 0x050, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS1__GPIO_4_3		IOMUX_PAD(0x000, 0x050, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CS4__CS4		IOMUX_PAD(0x264, 0x054, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS4__UART5_CTS		IOMUX_PAD(0x264, 0x054, 0x13, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS4__GPIO_3_20		IOMUX_PAD(0x264, 0x054, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CS5__CS5		IOMUX_PAD(0x268, 0x058, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS5__UART5_RTS		IOMUX_PAD(0x268, 0x058, 0x13, 0x574, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS5__GPIO_3_21		IOMUX_PAD(0x268, 0x058, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NF_CE0__NF_CE0		IOMUX_PAD(0x26c, 0x05c, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_NF_CE0__GPIO_3_22	IOMUX_PAD(0x26c, 0x05c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_ECB__ECB		IOMUX_PAD(0x270, 0x060, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_ECB__UART5_TXD_MUX	IOMUX_PAD(0x270, 0x060, 0x13, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_ECB__GPIO_3_23		IOMUX_PAD(0x270, 0x060, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LBA__LBA		IOMUX_PAD(0x274, 0x064, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LBA__UART5_RXD_MUX	IOMUX_PAD(0x274, 0x064, 0x13, 0x578, 0, NO_PAD_CTRL)
+#define MX25_PAD_LBA__GPIO_3_24		IOMUX_PAD(0x274, 0x064, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_BCLK__BCLK		IOMUX_PAD(0x000, 0x068, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_BCLK__GPIO_4_4		IOMUX_PAD(0x000, 0x068, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_RW__RW			IOMUX_PAD(0x278, 0x06c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_RW__AUD4_TXFS		IOMUX_PAD(0x278, 0x06c, 0x14, 0x474, 0, NO_PAD_CTRL)
+#define MX25_PAD_RW__GPIO_3_25		IOMUX_PAD(0x278, 0x06c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFWE_B__NFWE_B		IOMUX_PAD(0x000, 0x070, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_NFWE_B__GPIO_3_26	IOMUX_PAD(0x000, 0x070, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFRE_B__NFRE_B		IOMUX_PAD(0x000, 0x074, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_NFRE_B__GPIO_3_27	IOMUX_PAD(0x000, 0x074, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFALE__NFALE		IOMUX_PAD(0x000, 0x078, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_NFALE__GPIO_3_28	IOMUX_PAD(0x000, 0x078, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFCLE__NFCLE		IOMUX_PAD(0x000, 0x07c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_NFCLE__GPIO_3_29	IOMUX_PAD(0x000, 0x07c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFWP_B__NFWP_B		IOMUX_PAD(0x000, 0x080, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_NFWP_B__GPIO_3_30	IOMUX_PAD(0x000, 0x080, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFRB__NFRB		IOMUX_PAD(0x27c, 0x084, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_NFRB__GPIO_3_31	IOMUX_PAD(0x27c, 0x084, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D15__D15		IOMUX_PAD(0x280, 0x088, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D15__LD16		IOMUX_PAD(0x280, 0x088, 0x01, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D15__GPIO_4_5		IOMUX_PAD(0x280, 0x088, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D14__D14		IOMUX_PAD(0x284, 0x08c, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D14__LD17		IOMUX_PAD(0x284, 0x08c, 0x01, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D14__GPIO_4_6		IOMUX_PAD(0x284, 0x08c, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D13__D13		IOMUX_PAD(0x288, 0x090, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D13__LD18		IOMUX_PAD(0x288, 0x090, 0x01, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D13__GPIO_4_7		IOMUX_PAD(0x288, 0x090, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D12__D12		IOMUX_PAD(0x28c, 0x094, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D12__GPIO_4_8		IOMUX_PAD(0x28c, 0x094, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D11__D11		IOMUX_PAD(0x290, 0x098, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D11__GPIO_4_9		IOMUX_PAD(0x290, 0x098, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D10__D10		IOMUX_PAD(0x294, 0x09c, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D10__GPIO_4_10		IOMUX_PAD(0x294, 0x09c, 0x05, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D10__USBOTG_OC		IOMUX_PAD(0x294, 0x09c, 0x06, 0x57c, 0, PAD_CTL_PUS_100K_UP)
+
+#define MX25_PAD_D9__D9			IOMUX_PAD(0x298, 0x0a0, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D9__GPIO_4_11		IOMUX_PAD(0x298, 0x0a0, 0x05, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D9__USBH2_PWR		IOMUX_PAD(0x298, 0x0a0, 0x06, 0, 0, PAD_CTL_PKE)
+
+#define MX25_PAD_D8__D8			IOMUX_PAD(0x29c, 0x0a4, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D8__GPIO_4_12		IOMUX_PAD(0x29c, 0x0a4, 0x05, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D8__USBH2_OC		IOMUX_PAD(0x29c, 0x0a4, 0x06, 0x580, 0, PAD_CTL_PUS_100K_UP)
+
+#define MX25_PAD_D7__D7			IOMUX_PAD(0x2a0, 0x0a8, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D7__GPIO_4_13		IOMUX_PAD(0x2a0, 0x0a8, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D6__D6			IOMUX_PAD(0x2a4, 0x0ac, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D6__GPIO_4_14		IOMUX_PAD(0x2a4, 0x0ac, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D5__D5			IOMUX_PAD(0x2a8, 0x0b0, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D5__GPIO_4_15		IOMUX_PAD(0x2a8, 0x0b0, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D4__D4			IOMUX_PAD(0x2ac, 0x0b4, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D4__GPIO_4_16		IOMUX_PAD(0x2ac, 0x0b4, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D3__D3			IOMUX_PAD(0x2b0, 0x0b8, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D3__GPIO_4_17		IOMUX_PAD(0x2b0, 0x0b8, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D2__D2			IOMUX_PAD(0x2b4, 0x0bc, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D2__GPIO_4_18		IOMUX_PAD(0x2b4, 0x0bc, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D1__D1			IOMUX_PAD(0x2b8, 0x0c0, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D1__GPIO_4_19		IOMUX_PAD(0x2b8, 0x0c0, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D0__D0			IOMUX_PAD(0x2bc, 0x0c4, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D0__GPIO_4_20		IOMUX_PAD(0x2bc, 0x0c4, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD0__LD0		IOMUX_PAD(0x2c0, 0x0c8, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD0__CSI_D0		IOMUX_PAD(0x2c0, 0x0c8, 0x12, 0x488, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD0__GPIO_2_15		IOMUX_PAD(0x2c0, 0x0c8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD1__LD1		IOMUX_PAD(0x2c4, 0x0cc, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD1__CSI_D1		IOMUX_PAD(0x2c4, 0x0cc, 0x12, 0x48c, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD1__GPIO_2_16		IOMUX_PAD(0x2c4, 0x0cc, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD2__LD2		IOMUX_PAD(0x2c8, 0x0d0, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD2__GPIO_2_17		IOMUX_PAD(0x2c8, 0x0d0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD3__LD3		IOMUX_PAD(0x2cc, 0x0d4, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD3__GPIO_2_18		IOMUX_PAD(0x2cc, 0x0d4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD4__LD4		IOMUX_PAD(0x2d0, 0x0d8, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD4__GPIO_2_19		IOMUX_PAD(0x2d0, 0x0d8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD5__LD5		IOMUX_PAD(0x2d4, 0x0dc, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD5__GPIO_1_19		IOMUX_PAD(0x2d4, 0x0dc, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD6__LD6		IOMUX_PAD(0x2d8, 0x0e0, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD6__GPIO_1_20		IOMUX_PAD(0x2d8, 0x0e0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD7__LD7		IOMUX_PAD(0x2dc, 0x0e4, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD7__GPIO_1_21		IOMUX_PAD(0x2dc, 0x0e4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD8__LD8		IOMUX_PAD(0x2e0, 0x0e8, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD8__FEC_TX_ERR	IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTL)
+
+#define MX25_PAD_LD9__LD9		IOMUX_PAD(0x2e4, 0x0ec, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD9__FEC_COL		IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTL)
+
+#define MX25_PAD_LD10__LD10		IOMUX_PAD(0x2e8, 0x0f0, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD10__FEC_RX_ER	IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTL)
+
+#define MX25_PAD_LD11__LD11		IOMUX_PAD(0x2ec, 0x0f4, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD11__FEC_RDATA2	IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTL)
+
+#define MX25_PAD_LD12__LD12		IOMUX_PAD(0x2f0, 0x0f8, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD12__FEC_RDATA3	IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTL)
+
+#define MX25_PAD_LD13__LD13		IOMUX_PAD(0x2f4, 0x0fc, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD13__FEC_TDATA2	IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTL)
+
+#define MX25_PAD_LD14__LD14		IOMUX_PAD(0x2f8, 0x100, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD14__FEC_TDATA3	IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTL)
+
+#define MX25_PAD_LD15__LD15		IOMUX_PAD(0x2fc, 0x104, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD15__FEC_RX_CLK	IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTL)
+
+#define MX25_PAD_HSYNC__HSYNC		IOMUX_PAD(0x300, 0x108, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_HSYNC__GPIO_1_22	IOMUX_PAD(0x300, 0x108, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_VSYNC__VSYNC		IOMUX_PAD(0x304, 0x10c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_VSYNC__GPIO_1_23	IOMUX_PAD(0x304, 0x10c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LSCLK__LSCLK		IOMUX_PAD(0x308, 0x110, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LSCLK__GPIO_1_24	IOMUX_PAD(0x308, 0x110, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_OE_ACD__OE_ACD		IOMUX_PAD(0x30c, 0x114, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_OE_ACD__GPIO_1_25	IOMUX_PAD(0x30c, 0x114, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CONTRAST__CONTRAST	IOMUX_PAD(0x310, 0x118, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CONTRAST__FEC_CRS	IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTL)
+
+#define MX25_PAD_PWM__PWM		IOMUX_PAD(0x314, 0x11c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_PWM__GPIO_1_26		IOMUX_PAD(0x314, 0x11c, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_PWM__USBH2_OC		IOMUX_PAD(0x314, 0x11c, 0x16, 0x580, 1, PAD_CTL_PUS_100K_UP)
+
+#define MX25_PAD_CSI_D2__CSI_D2		IOMUX_PAD(0x318, 0x120, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D2__UART5_RXD_MUX	IOMUX_PAD(0x318, 0x120, 0x11, 0x578, 1, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D2__GPIO_1_27	IOMUX_PAD(0x318, 0x120, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D3__CSI_D3		IOMUX_PAD(0x31c, 0x124, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D3__GPIO_1_28	IOMUX_PAD(0x31c, 0x124, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D4__CSI_D4		IOMUX_PAD(0x320, 0x128, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D4__UART5_RTS	IOMUX_PAD(0x320, 0x128, 0x11, 0x574, 1, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D4__GPIO_1_29	IOMUX_PAD(0x320, 0x128, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D5__CSI_D5		IOMUX_PAD(0x324, 0x12c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D5__GPIO_1_30	IOMUX_PAD(0x324, 0x12c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D6__CSI_D6		IOMUX_PAD(0x328, 0x130, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D6__GPIO_1_31	IOMUX_PAD(0x328, 0x130, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D7__CSI_D7		IOMUX_PAD(0x32c, 0x134, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D7__GPIO_1_6	IOMUX_PAD(0x32c, 0x134, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D8__CSI_D8		IOMUX_PAD(0x330, 0x138, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D8__GPIO_1_7	IOMUX_PAD(0x330, 0x138, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D9__CSI_D9		IOMUX_PAD(0x334, 0x13c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D9__GPIO_4_21	IOMUX_PAD(0x334, 0x13c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_MCLK__CSI_MCLK	IOMUX_PAD(0x338, 0x140, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_MCLK__GPIO_1_8	IOMUX_PAD(0x338, 0x140, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_VSYNC__CSI_VSYNC	IOMUX_PAD(0x33c, 0x144, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_VSYNC__GPIO_1_9	IOMUX_PAD(0x33c, 0x144, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_HSYNC__CSI_HSYNC	IOMUX_PAD(0x340, 0x148, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_HSYNC__GPIO_1_10	IOMUX_PAD(0x340, 0x148, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK	IOMUX_PAD(0x344, 0x14c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_PIXCLK__GPIO_1_11	IOMUX_PAD(0x344, 0x14c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_I2C1_CLK__I2C1_CLK	IOMUX_PAD(0x348, 0x150, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_I2C1_CLK__GPIO_1_12	IOMUX_PAD(0x348, 0x150, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_I2C1_DAT__I2C1_DAT	IOMUX_PAD(0x34c, 0x154, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_I2C1_DAT__GPIO_1_13	IOMUX_PAD(0x34c, 0x154, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI	IOMUX_PAD(0x350, 0x158, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSPI1_MOSI__GPIO_1_14	IOMUX_PAD(0x350, 0x158, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_MISO__CSPI1_MISO	IOMUX_PAD(0x354, 0x15c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSPI1_MISO__GPIO_1_15	IOMUX_PAD(0x354, 0x15c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_SS0__CSPI1_SS0	IOMUX_PAD(0x358, 0x160, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSPI1_SS0__GPIO_1_16	IOMUX_PAD(0x358, 0x160, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_SS1__CSPI1_SS1	IOMUX_PAD(0x35c, 0x164, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSPI1_SS1__GPIO_1_17	IOMUX_PAD(0x35c, 0x164, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK	IOMUX_PAD(0x360, 0x168, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSPI1_SCLK__GPIO_1_18	IOMUX_PAD(0x360, 0x168, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_RDY__CSPI1_RDY	IOMUX_PAD(0x364, 0x16c, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_CSPI1_RDY__GPIO_2_22	IOMUX_PAD(0x364, 0x16c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART1_RXD__UART1_RXD	IOMUX_PAD(0x368, 0x170, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN)
+#define MX25_PAD_UART1_RXD__GPIO_4_22	IOMUX_PAD(0x368, 0x170, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART1_TXD__UART1_TXD	IOMUX_PAD(0x36c, 0x174, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UART1_TXD__GPIO_4_23	IOMUX_PAD(0x36c, 0x174, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART1_RTS__UART1_RTS	IOMUX_PAD(0x370, 0x178, 0x10, 0, 0, PAD_CTL_PUS_100K_UP)
+#define MX25_PAD_UART1_RTS__CSI_D0	IOMUX_PAD(0x370, 0x178, 0x11, 0x488, 1, NO_PAD_CTRL)
+#define MX25_PAD_UART1_RTS__GPIO_4_24	IOMUX_PAD(0x370, 0x178, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART1_CTS__UART1_CTS	IOMUX_PAD(0x374, 0x17c, 0x10, 0, 0, PAD_CTL_PUS_100K_UP)
+#define MX25_PAD_UART1_CTS__CSI_D1	IOMUX_PAD(0x374, 0x17c, 0x11, 0x48c, 1, NO_PAD_CTRL)
+#define MX25_PAD_UART1_CTS__GPIO_4_25	IOMUX_PAD(0x374, 0x17c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART2_RXD__UART2_RXD	IOMUX_PAD(0x378, 0x180, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UART2_RXD__GPIO_4_26	IOMUX_PAD(0x378, 0x180, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART2_TXD__UART2_TXD	IOMUX_PAD(0x37c, 0x184, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UART2_TXD__GPIO_4_27	IOMUX_PAD(0x37c, 0x184, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART2_RTS__UART2_RTS	IOMUX_PAD(0x380, 0x188, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UART2_RTS__FEC_COL	IOMUX_PAD(0x380, 0x188, 0x12, 0x504, 2, NO_PAD_CTL)
+#define MX25_PAD_UART2_RTS__GPIO_4_28	IOMUX_PAD(0x380, 0x188, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART2_CTS__FEC_RX_ER	IOMUX_PAD(0x384, 0x18c, 0x12, 0x518, 2, NO_PAD_CTL)
+#define MX25_PAD_UART2_CTS__UART2_CTS	IOMUX_PAD(0x384, 0x18c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UART2_CTS__GPIO_4_29	IOMUX_PAD(0x384, 0x18c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_CMD__SD1_CMD	IOMUX_PAD(0x388, 0x190, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_CMD__FEC_RDATA2	IOMUX_PAD(0x388, 0x190, 0x12, 0x50c, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_CMD__GPIO_2_23	IOMUX_PAD(0x388, 0x190, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_CLK__SD1_CLK	IOMUX_PAD(0x38c, 0x194, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_CLK__FEC_RDATA3	IOMUX_PAD(0x38c, 0x194, 0x12, 0x510, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_CLK__GPIO_2_24	IOMUX_PAD(0x38c, 0x194, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_DATA0__SD1_DATA0	IOMUX_PAD(0x390, 0x198, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_DATA0__GPIO_2_25	IOMUX_PAD(0x390, 0x198, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_DATA1__SD1_DATA1	IOMUX_PAD(0x394, 0x19c, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_DATA1__AUD7_RXD	IOMUX_PAD(0x394, 0x19c, 0x13, 0x478, 0, NO_PAD_CTRL)
+#define MX25_PAD_SD1_DATA1__GPIO_2_26	IOMUX_PAD(0x394, 0x19c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_DATA2__SD1_DATA2	IOMUX_PAD(0x398, 0x1a0, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_DATA2__FEC_RX_CLK	IOMUX_PAD(0x398, 0x1a0, 0x15, 0x514, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_DATA2__GPIO_2_27	IOMUX_PAD(0x398, 0x1a0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_DATA3__SD1_DATA3	IOMUX_PAD(0x39c, 0x1a4, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_DATA3__FEC_CRS	IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_DATA3__GPIO_2_28	IOMUX_PAD(0x39c, 0x1a4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_ROW0__KPP_ROW0	IOMUX_PAD(0x3a0, 0x1a8, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_KPP_ROW0__GPIO_2_29	IOMUX_PAD(0x3a0, 0x1a8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_ROW1__KPP_ROW1	IOMUX_PAD(0x3a4, 0x1ac, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_KPP_ROW1__GPIO_2_30	IOMUX_PAD(0x3a4, 0x1ac, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_ROW2__KPP_ROW2	IOMUX_PAD(0x3a8, 0x1b0, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_KPP_ROW2__CSI_D0	IOMUX_PAD(0x3a8, 0x1b0, 0x13, 0x488, 2, NO_PAD_CTRL)
+#define MX25_PAD_KPP_ROW2__GPIO_2_31	IOMUX_PAD(0x3a8, 0x1b0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_ROW3__KPP_ROW3	IOMUX_PAD(0x3ac, 0x1b4, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_KPP_ROW3__CSI_LD1	IOMUX_PAD(0x3ac, 0x1b4, 0x13, 0x48c, 2, NO_PAD_CTRL)
+#define MX25_PAD_KPP_ROW3__GPIO_3_0	IOMUX_PAD(0x3ac, 0x1b4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_COL0__KPP_COL0	IOMUX_PAD(0x3b0, 0x1b8, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL0__GPIO_3_1	IOMUX_PAD(0x3b0, 0x1b8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_COL1__KPP_COL1	IOMUX_PAD(0x3b4, 0x1bc, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL1__GPIO_3_2	IOMUX_PAD(0x3b4, 0x1bc, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_COL2__KPP_COL2	IOMUX_PAD(0x3b8, 0x1c0, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL2__GPIO_3_3	IOMUX_PAD(0x3b8, 0x1c0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_COL3__KPP_COL3	IOMUX_PAD(0x3bc, 0x1c4, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL3__GPIO_3_4	IOMUX_PAD(0x3bc, 0x1c4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_MDC__FEC_MDC	IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_MDC__AUD4_TXD	IOMUX_PAD(0x3c0, 0x1c8, 0x12, 0x464, 1, NO_PAD_CTRL)
+#define MX25_PAD_FEC_MDC__GPIO_3_5	IOMUX_PAD(0x3c0, 0x1c8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_MDIO__FEC_MDIO	IOMUX_PAD(0x3c4, 0x1cc, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_22K_UP)
+#define MX25_PAD_FEC_MDIO__AUD4_RXD	IOMUX_PAD(0x3c4, 0x1cc, 0x12, 0x460, 1, NO_PAD_CTRL)
+#define MX25_PAD_FEC_MDIO__GPIO_3_6	IOMUX_PAD(0x3c4, 0x1cc, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_TDATA0__FEC_TDATA0	IOMUX_PAD(0x3c8, 0x1d0, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_TDATA0__GPIO_3_7	IOMUX_PAD(0x3c8, 0x1d0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_TDATA1__FEC_TDATA1	IOMUX_PAD(0x3cc, 0x1d4, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_TDATA1__AUD4_TXFS	IOMUX_PAD(0x3cc, 0x1d4, 0x12, 0x474, 1, NO_PAD_CTRL)
+#define MX25_PAD_FEC_TDATA1__GPIO_3_8	IOMUX_PAD(0x3cc, 0x1d4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_TX_EN__FEC_TX_EN	IOMUX_PAD(0x3d0, 0x1d8, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_TX_EN__GPIO_3_9   	IOMUX_PAD(0x3d0, 0x1d8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_RDATA0__FEC_RDATA0	IOMUX_PAD(0x3d4, 0x1dc, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
+#define MX25_PAD_FEC_RDATA0__GPIO_3_10	IOMUX_PAD(0x3d4, 0x1dc, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_RDATA1__FEC_RDATA1	IOMUX_PAD(0x3d8, 0x1e0, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
+#define MX25_PAD_FEC_RDATA1__GPIO_3_11	IOMUX_PAD(0x3d8, 0x1e0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_RX_DV__FEC_RX_DV	IOMUX_PAD(0x3dc, 0x1e4, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
+#define MX25_PAD_FEC_RX_DV__CAN2_RX	IOMUX_PAD(0x3dc, 0x1e4, 0x14, 0x484, 0, PAD_CTL_PUS_22K_UP)
+#define MX25_PAD_FEC_RX_DV__GPIO_3_12	IOMUX_PAD(0x3dc, 0x1e4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK	IOMUX_PAD(0x3e0, 0x1e8, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN)
+#define MX25_PAD_FEC_TX_CLK__GPIO_3_13	IOMUX_PAD(0x3e0, 0x1e8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_RTCK__RTCK		IOMUX_PAD(0x3e4, 0x1ec, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_RTCK__OWIRE		IOMUX_PAD(0x3e4, 0x1ec, 0x11, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_RTCK__GPIO_3_14	IOMUX_PAD(0x3e4, 0x1ec, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_DE_B__DE_B		IOMUX_PAD(0x3ec, 0x1f0, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_DE_B__GPIO_2_20	IOMUX_PAD(0x3ec, 0x1f0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_TDO__TDO		IOMUX_PAD(0x3e8, 0x000, 0x00, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_GPIO_A__GPIO_A		IOMUX_PAD(0x3f0, 0x1f4, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_A__CAN1_TX	IOMUX_PAD(0x3f0, 0x1f4, 0x16, 0, 0, PAD_CTL_PUS_22K_UP)
+#define MX25_PAD_GPIO_A__USBOTG_PWR	IOMUX_PAD(0x3f0, 0x1f4, 0x12, 0, 0, PAD_CTL_PKE)
+
+#define MX25_PAD_GPIO_B__GPIO_B		IOMUX_PAD(0x3f4, 0x1f8, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_B__CAN1_RX	IOMUX_PAD(0x3f4, 0x1f8, 0x16, 0x480, 1, PAD_CTL_PUS_22K)
+#define MX25_PAD_GPIO_B__USBOTG_OC	IOMUX_PAD(0x3f4, 0x1f8, 0x12, 0x57c, 1, PAD_CTL_PUS_100K_UP)
+
+#define MX25_PAD_GPIO_C__GPIO_C		IOMUX_PAD(0x3f8, 0x1fc, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_C__CAN2_TX	IOMUX_PAD(0x3f8, 0x1fc, 0x16, 0, 0, PAD_CTL_PUS_22K_UP)
+
+#define MX25_PAD_GPIO_D__GPIO_D		IOMUX_PAD(0x3fc, 0x200, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_D__CAN2_RX	IOMUX_PAD(0x3fc, 0x200, 0x16, 0x484, 1, PAD_CTL_PUS_22K_UP)
+
+#define MX25_PAD_GPIO_E__GPIO_E		IOMUX_PAD(0x400, 0x204, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_E__AUD7_TXD	IOMUX_PAD(0x400, 0x204, 0x14, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_GPIO_F__GPIO_F		IOMUX_PAD(0x404, 0x208, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_F__AUD7_TXC	IOMUX_PAD(0x404, 0x208, 0x14, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK	IOMUX_PAD(0x000, 0x20c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_EXT_ARMCLK__GPIO_3_15	IOMUX_PAD(0x000, 0x20c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK IOMUX_PAD(0x000, 0x210, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16	IOMUX_PAD(0x000, 0x210, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_VSTBY_REQ__VSTBY_REQ	IOMUX_PAD(0x408, 0x214, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_VSTBY_REQ__AUD7_TXFS	IOMUX_PAD(0x408, 0x214, 0x14, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_VSTBY_REQ__GPIO_3_17	IOMUX_PAD(0x408, 0x214, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_VSTBY_ACK__VSTBY_ACK	IOMUX_PAD(0x40c, 0x218, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_VSTBY_ACK__GPIO_3_18	IOMUX_PAD(0x40c, 0x218, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_POWER_FAIL__POWER_FAIL	IOMUX_PAD(0x410, 0x21c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_POWER_FAIL__AUD7_RXD	IOMUX_PAD(0x410, 0x21c, 0x14, 0x478, 1, NO_PAD_CTRL)
+#define MX25_PAD_POWER_FAIL__GPIO_3_19	IOMUX_PAD(0x410, 0x21c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CLKO__CLKO		IOMUX_PAD(0x414, 0x220, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CLKO__GPIO_2_21	IOMUX_PAD(0x414, 0x220, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_BOOT_MODE0__BOOT_MODE0	IOMUX_PAD(0x000, 0x224, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_BOOT_MODE0__GPIO_4_30	IOMUX_PAD(0x000, 0x224, 0x05, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_BOOT_MODE1__BOOT_MODE1	IOMUX_PAD(0x000, 0x228, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_BOOT_MODE1__GPIO_4_31	IOMUX_PAD(0x000, 0x228, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CTL_GRP_DVS_MISC	IOMUX_PAD(0x418, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_FEC	IOMUX_PAD(0x41c, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_JTAG	IOMUX_PAD(0x420, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_NFC	IOMUX_PAD(0x424, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_CSI	IOMUX_PAD(0x428, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_WEIM	IOMUX_PAD(0x42c, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_DDR	IOMUX_PAD(0x430, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_CRM	IOMUX_PAD(0x434, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_KPP	IOMUX_PAD(0x438, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_SDHC1	IOMUX_PAD(0x43c, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_LCD	IOMUX_PAD(0x440, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_UART	IOMUX_PAD(0x444, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_NFC	IOMUX_PAD(0x448, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_CSI	IOMUX_PAD(0x44c, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_CSPI1	IOMUX_PAD(0x450, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DDRTYPE	IOMUX_PAD(0x454, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_SDHC1	IOMUX_PAD(0x458, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_LCD	IOMUX_PAD(0x45c, 0x000, 0, 0, 0, NO_PAD_CTRL)
+
+#endif // __ASSEMBLY__
+#endif // __IOMUX_MX25_H__
diff --git a/arch/arm/plat-mxc/include/mach/iomux.h b/arch/arm/plat-mxc/include/mach/iomux.h
index 171f8adc110..6d49f8ae325 100644
--- a/arch/arm/plat-mxc/include/mach/iomux.h
+++ b/arch/arm/plat-mxc/include/mach/iomux.h
@@ -49,6 +49,9 @@
 #ifdef CONFIG_ARCH_MX2
 # define GPIO_PORT_MAX  5
 #endif
+#ifdef CONFIG_ARCH_MX25
+# define GPIO_PORT_MAX  3
+#endif
 
 #ifndef GPIO_PORT_MAX
 # error "GPIO config port count unknown!"
@@ -107,6 +110,9 @@
 #include <mach/iomux-mx27.h>
 #endif
 #endif
+#ifdef CONFIG_ARCH_MX25
+#include <mach/iomux-mx25.h>
+#endif
 
 
 /* decode irq number to use with IMR(x), ISR(x) and friends */
-- 
cgit v1.2.3


From fd6ac7bb9d671d36fd7536c68fde977d197756ab Mon Sep 17 00:00:00 2001
From: Dmitriy Taychenachev <dimichxp@gmail.com>
Date: Fri, 31 Jul 2009 20:29:22 +0900
Subject: MXC: add basic MXC91231 support

Signed-off-by: Dmitriy Taychenachev <dimichxp@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/Makefile                            |   1 +
 arch/arm/mach-mxc91231/Kconfig               |  11 +
 arch/arm/mach-mxc91231/Makefile              |   2 +
 arch/arm/mach-mxc91231/Makefile.boot         |   3 +
 arch/arm/mach-mxc91231/clock.c               | 642 +++++++++++++++++++++++++++
 arch/arm/mach-mxc91231/crm_regs.h            | 399 +++++++++++++++++
 arch/arm/mach-mxc91231/devices.c             | 251 +++++++++++
 arch/arm/mach-mxc91231/devices.h             |  13 +
 arch/arm/mach-mxc91231/magx-zn5.c            |  59 +++
 arch/arm/mach-mxc91231/mm.c                  |  94 ++++
 arch/arm/mach-mxc91231/system.c              |  51 +++
 arch/arm/plat-mxc/Kconfig                    |   8 +
 arch/arm/plat-mxc/include/mach/common.h      |   6 +
 arch/arm/plat-mxc/include/mach/debug-macro.S |   8 +
 arch/arm/plat-mxc/include/mach/hardware.h    |   4 +
 arch/arm/plat-mxc/include/mach/irqs.h        |   2 +
 arch/arm/plat-mxc/include/mach/memory.h      |   2 +
 arch/arm/plat-mxc/include/mach/mxc.h         |  15 +-
 arch/arm/plat-mxc/include/mach/mxc91231.h    | 315 +++++++++++++
 arch/arm/plat-mxc/include/mach/system.h      |  10 +
 arch/arm/plat-mxc/include/mach/timex.h       |   2 +
 arch/arm/plat-mxc/include/mach/uncompress.h  |   4 +
 arch/arm/plat-mxc/system.c                   |   7 +
 arch/arm/plat-mxc/time.c                     |   2 +-
 24 files changed, 1909 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/mach-mxc91231/Kconfig
 create mode 100644 arch/arm/mach-mxc91231/Makefile
 create mode 100644 arch/arm/mach-mxc91231/Makefile.boot
 create mode 100644 arch/arm/mach-mxc91231/clock.c
 create mode 100644 arch/arm/mach-mxc91231/crm_regs.h
 create mode 100644 arch/arm/mach-mxc91231/devices.c
 create mode 100644 arch/arm/mach-mxc91231/devices.h
 create mode 100644 arch/arm/mach-mxc91231/magx-zn5.c
 create mode 100644 arch/arm/mach-mxc91231/mm.c
 create mode 100644 arch/arm/mach-mxc91231/system.c
 create mode 100644 arch/arm/plat-mxc/include/mach/mxc91231.h

(limited to 'arch/arm')

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 95ba3c5ca14..c1d60038328 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -159,6 +159,7 @@ machine-$(CONFIG_ARCH_U300)		:= u300
 machine-$(CONFIG_ARCH_VERSATILE)	:= versatile
 machine-$(CONFIG_ARCH_W90X900)		:= w90x900
 machine-$(CONFIG_FOOTBRIDGE)		:= footbridge
+machine-$(CONFIG_ARCH_MXC91231)		:= mxc91231
 
 # Platform directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
diff --git a/arch/arm/mach-mxc91231/Kconfig b/arch/arm/mach-mxc91231/Kconfig
new file mode 100644
index 00000000000..8e5fa38ebb6
--- /dev/null
+++ b/arch/arm/mach-mxc91231/Kconfig
@@ -0,0 +1,11 @@
+if ARCH_MXC91231
+
+comment "MXC91231 platforms:"
+
+config MACH_MAGX_ZN5
+	bool "Support Motorola Zn5 GSM phone"
+	default n
+	help
+	  Include support for Motorola Zn5 GSM phone.
+
+endif
diff --git a/arch/arm/mach-mxc91231/Makefile b/arch/arm/mach-mxc91231/Makefile
new file mode 100644
index 00000000000..eb70b669c55
--- /dev/null
+++ b/arch/arm/mach-mxc91231/Makefile
@@ -0,0 +1,2 @@
+obj-y	:= mm.o clock.o devices.o system.o
+obj-$(CONFIG_MACH_MAGX_ZN5) += magx-zn5.o
diff --git a/arch/arm/mach-mxc91231/Makefile.boot b/arch/arm/mach-mxc91231/Makefile.boot
new file mode 100644
index 00000000000..9939a19d99a
--- /dev/null
+++ b/arch/arm/mach-mxc91231/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y	:= 0x90008000
+params_phys-y	:= 0x90000100
+initrd_phys-y	:= 0x90800000
diff --git a/arch/arm/mach-mxc91231/clock.c b/arch/arm/mach-mxc91231/clock.c
new file mode 100644
index 00000000000..ecfa37fef8a
--- /dev/null
+++ b/arch/arm/mach-mxc91231/clock.c
@@ -0,0 +1,642 @@
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <mach/clock.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+
+#include <asm/clkdev.h>
+#include <asm/bug.h>
+#include <asm/div64.h>
+
+#include "crm_regs.h"
+
+#define CRM_SMALL_DIVIDER(base, name) \
+	crm_small_divider(base, \
+			  base ## _ ## name ## _OFFSET, \
+			  base ## _ ## name ## _MASK)
+#define CRM_1DIVIDER(base, name) \
+	crm_divider(base, \
+		    base ## _ ## name ## _OFFSET, \
+		    base ## _ ## name ## _MASK, 1)
+#define CRM_16DIVIDER(base, name) \
+	crm_divider(base, \
+		    base ## _ ## name ## _OFFSET, \
+		    base ## _ ## name ## _MASK, 16)
+
+static u32 crm_small_divider(void __iomem *reg, u8 offset, u32 mask)
+{
+	static const u32 crm_small_dividers[] = {
+		2, 3, 4, 5, 6, 8, 10, 12
+	};
+	u8 idx;
+
+	idx = (__raw_readl(reg) & mask) >> offset;
+	if (idx > 7)
+		return 1;
+
+	return crm_small_dividers[idx];
+}
+
+static u32 crm_divider(void __iomem *reg, u8 offset, u32 mask, u32 z)
+{
+	u32 div;
+	div = (__raw_readl(reg) & mask) >> offset;
+	return div ? div : z;
+}
+
+static int _clk_1bit_enable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg |= 1 << clk->enable_shift;
+	__raw_writel(reg, clk->enable_reg);
+
+	return 0;
+}
+
+static void _clk_1bit_disable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg &= ~(1 << clk->enable_shift);
+	__raw_writel(reg, clk->enable_reg);
+}
+
+static int _clk_3bit_enable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg |= 0x7 << clk->enable_shift;
+	__raw_writel(reg, clk->enable_reg);
+
+	return 0;
+}
+
+static void _clk_3bit_disable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg &= ~(0x7 << clk->enable_shift);
+	__raw_writel(reg, clk->enable_reg);
+}
+
+static unsigned long ckih_rate;
+
+static unsigned long clk_ckih_get_rate(struct clk *clk)
+{
+	return ckih_rate;
+}
+
+static struct clk ckih_clk = {
+	.get_rate = clk_ckih_get_rate,
+};
+
+static unsigned long clk_ckih_x2_get_rate(struct clk *clk)
+{
+	return 2 * clk_get_rate(clk->parent);
+}
+
+static struct clk ckih_x2_clk = {
+	.parent = &ckih_clk,
+	.get_rate = clk_ckih_x2_get_rate,
+};
+
+static unsigned long clk_ckil_get_rate(struct clk *clk)
+{
+	return CKIL_CLK_FREQ;
+}
+
+static struct clk ckil_clk = {
+	.get_rate = clk_ckil_get_rate,
+};
+
+/* plls stuff */
+static struct clk mcu_pll_clk;
+static struct clk dsp_pll_clk;
+static struct clk usb_pll_clk;
+
+static struct clk *pll_clk(u8 sel)
+{
+	switch (sel) {
+	case 0:
+		return &mcu_pll_clk;
+	case 1:
+		return &dsp_pll_clk;
+	case 2:
+		return &usb_pll_clk;
+	}
+	BUG();
+}
+
+static void __iomem *pll_base(struct clk *clk)
+{
+	if (clk == &mcu_pll_clk)
+		return MXC_PLL0_BASE;
+	else if (clk == &dsp_pll_clk)
+		return MXC_PLL1_BASE;
+	else if (clk == &usb_pll_clk)
+		return MXC_PLL2_BASE;
+	BUG();
+}
+
+static unsigned long clk_pll_get_rate(struct clk *clk)
+{
+	const void __iomem *pllbase;
+	unsigned long dp_op, dp_mfd, dp_mfn, pll_hfsm, ref_clk, mfi;
+	long mfn, mfn_abs, mfd, pdf;
+	s64 temp;
+	pllbase = pll_base(clk);
+
+	pll_hfsm = __raw_readl(pllbase + MXC_PLL_DP_CTL) & MXC_PLL_DP_CTL_HFSM;
+	if (pll_hfsm == 0) {
+		dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
+		dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
+		dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
+	} else {
+		dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP);
+		dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD);
+		dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN);
+	}
+
+	pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
+	mfi = (dp_op >> MXC_PLL_DP_OP_MFI_OFFSET) & MXC_PLL_DP_OP_PDF_MASK;
+	mfi = (mfi <= 5) ? 5 : mfi;
+	mfd = dp_mfd & MXC_PLL_DP_MFD_MASK;
+	mfn = dp_mfn & MXC_PLL_DP_MFN_MASK;
+	mfn = (mfn <= 0x4000000) ? mfn : (mfn - 0x10000000);
+
+	if (mfn < 0)
+		mfn_abs = -mfn;
+	else
+		mfn_abs = mfn;
+
+/* XXX: actually this asumes that ckih is fed to pll, but spec says
+ * that ckih_x2 is also possible. need to check this out.
+ */
+	ref_clk = clk_get_rate(&ckih_clk);
+
+	ref_clk *= 2;
+	ref_clk /= pdf + 1;
+
+	temp = (u64) ref_clk * mfn_abs;
+	do_div(temp, mfd);
+	if (mfn < 0)
+		temp = -temp;
+	temp += ref_clk * mfi;
+
+	return temp;
+}
+
+static int clk_pll_enable(struct clk *clk)
+{
+	void __iomem *ctl;
+	u32 reg;
+
+	ctl = pll_base(clk);
+	reg = __raw_readl(ctl);
+	reg |= (MXC_PLL_DP_CTL_RST | MXC_PLL_DP_CTL_UPEN);
+	__raw_writel(reg, ctl);
+	do {
+		reg = __raw_readl(ctl);
+	} while ((reg & MXC_PLL_DP_CTL_LRF) != MXC_PLL_DP_CTL_LRF);
+	return 0;
+}
+
+static void clk_pll_disable(struct clk *clk)
+{
+	void __iomem *ctl;
+	u32 reg;
+
+	ctl = pll_base(clk);
+	reg = __raw_readl(ctl);
+	reg &= ~(MXC_PLL_DP_CTL_RST | MXC_PLL_DP_CTL_UPEN);
+	__raw_writel(reg, ctl);
+}
+
+static struct clk mcu_pll_clk = {
+	.parent = &ckih_clk,
+	.get_rate = clk_pll_get_rate,
+	.enable = clk_pll_enable,
+	.disable = clk_pll_disable,
+};
+
+static struct clk dsp_pll_clk = {
+	.parent = &ckih_clk,
+	.get_rate = clk_pll_get_rate,
+	.enable = clk_pll_enable,
+	.disable = clk_pll_disable,
+};
+
+static struct clk usb_pll_clk = {
+	.parent = &ckih_clk,
+	.get_rate = clk_pll_get_rate,
+	.enable = clk_pll_enable,
+	.disable = clk_pll_disable,
+};
+/* plls stuff end */
+
+/* ap_ref_clk stuff */
+static struct clk ap_ref_clk;
+
+static unsigned long clk_ap_ref_get_rate(struct clk *clk)
+{
+	u32 ascsr, acsr;
+	u8 ap_pat_ref_div_2, ap_isel, acs, ads;
+
+	ascsr = __raw_readl(MXC_CRMAP_ASCSR);
+	acsr = __raw_readl(MXC_CRMAP_ACSR);
+
+	/* 0 for ckih, 1 for ckih*2 */
+	ap_isel = ascsr & MXC_CRMAP_ASCSR_APISEL;
+	/* reg divider */
+	ap_pat_ref_div_2 = (ascsr >> MXC_CRMAP_ASCSR_AP_PATDIV2_OFFSET) & 0x1;
+	/* undocumented, 1 for disabling divider */
+	ads = (acsr >> MXC_CRMAP_ACSR_ADS_OFFSET) & 0x1;
+	/* 0 for pat_ref, 1 for divider out */
+	acs = acsr & MXC_CRMAP_ACSR_ACS;
+
+	if (acs & !ads)
+		/* use divided clock */
+		return clk_get_rate(clk->parent) / (ap_pat_ref_div_2 ? 2 : 1);
+
+	return clk_get_rate(clk->parent) * (ap_isel ? 2 : 1);
+}
+
+static struct clk ap_ref_clk = {
+	.parent = &ckih_clk,
+	.get_rate = clk_ap_ref_get_rate,
+};
+/* ap_ref_clk stuff end */
+
+/* ap_pre_dfs_clk stuff */
+static struct clk ap_pre_dfs_clk;
+
+static unsigned long clk_ap_pre_dfs_get_rate(struct clk *clk)
+{
+	u32 acsr, ascsr;
+
+	acsr = __raw_readl(MXC_CRMAP_ACSR);
+	ascsr = __raw_readl(MXC_CRMAP_ASCSR);
+
+	if (acsr & MXC_CRMAP_ACSR_ACS) {
+		u8 sel;
+		sel = (ascsr & MXC_CRMAP_ASCSR_APSEL_MASK) >>
+			MXC_CRMAP_ASCSR_APSEL_OFFSET;
+		return clk_get_rate(pll_clk(sel)) /
+			CRM_SMALL_DIVIDER(MXC_CRMAP_ACDR, ARMDIV);
+	}
+	return clk_get_rate(&ap_ref_clk);
+}
+
+static struct clk ap_pre_dfs_clk = {
+	.get_rate = clk_ap_pre_dfs_get_rate,
+};
+/* ap_pre_dfs_clk stuff end */
+
+/* usb_clk stuff */
+static struct clk usb_clk;
+
+static struct clk *clk_usb_parent(struct clk *clk)
+{
+	u32 acsr, ascsr;
+
+	acsr = __raw_readl(MXC_CRMAP_ACSR);
+	ascsr = __raw_readl(MXC_CRMAP_ASCSR);
+
+	if (acsr & MXC_CRMAP_ACSR_ACS) {
+		u8 sel;
+		sel = (ascsr & MXC_CRMAP_ASCSR_USBSEL_MASK) >>
+			MXC_CRMAP_ASCSR_USBSEL_OFFSET;
+		return pll_clk(sel);
+	}
+	return &ap_ref_clk;
+}
+
+static unsigned long clk_usb_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) /
+		CRM_SMALL_DIVIDER(MXC_CRMAP_ACDER2, USBDIV);
+}
+
+static struct clk usb_clk = {
+	.enable_reg = MXC_CRMAP_ACDER2,
+	.enable_shift = MXC_CRMAP_ACDER2_USBEN_OFFSET,
+	.get_rate = clk_usb_get_rate,
+	.enable = _clk_1bit_enable,
+	.disable = _clk_1bit_disable,
+};
+/* usb_clk stuff end */
+
+static unsigned long clk_ipg_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) / CRM_16DIVIDER(MXC_CRMAP_ACDR, IPDIV);
+}
+
+static unsigned long clk_ahb_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) /
+		CRM_16DIVIDER(MXC_CRMAP_ACDR, AHBDIV);
+}
+
+static struct clk ipg_clk = {
+	.parent = &ap_pre_dfs_clk,
+	.get_rate = clk_ipg_get_rate,
+};
+
+static struct clk ahb_clk = {
+	.parent = &ap_pre_dfs_clk,
+	.get_rate = clk_ahb_get_rate,
+};
+
+/* perclk_clk stuff */
+static struct clk perclk_clk;
+
+static unsigned long clk_perclk_get_rate(struct clk *clk)
+{
+	u32 acder2;
+
+	acder2 = __raw_readl(MXC_CRMAP_ACDER2);
+	if (acder2 & MXC_CRMAP_ACDER2_BAUD_ISEL_MASK)
+		return 2 * clk_get_rate(clk->parent);
+
+	return clk_get_rate(clk->parent);
+}
+
+static struct clk perclk_clk = {
+	.parent = &ckih_clk,
+	.get_rate = clk_perclk_get_rate,
+};
+/* perclk_clk stuff end */
+
+/* uart_clk stuff */
+static struct clk uart_clk[];
+
+static unsigned long clk_uart_get_rate(struct clk *clk)
+{
+	u32 div;
+
+	switch (clk->id) {
+	case 0:
+	case 1:
+		div = CRM_SMALL_DIVIDER(MXC_CRMAP_ACDER2, BAUDDIV);
+		break;
+	case 2:
+		div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRA, UART3DIV);
+		break;
+	default:
+		BUG();
+	}
+	return clk_get_rate(clk->parent) / div;
+}
+
+static struct clk uart_clk[] = {
+	{
+		.id = 0,
+		.parent = &perclk_clk,
+		.enable_reg = MXC_CRMAP_APRA,
+		.enable_shift = MXC_CRMAP_APRA_UART1EN_OFFSET,
+		.get_rate = clk_uart_get_rate,
+		.enable = _clk_1bit_enable,
+		.disable = _clk_1bit_disable,
+	}, {
+		.id = 1,
+		.parent = &perclk_clk,
+		.enable_reg = MXC_CRMAP_APRA,
+		.enable_shift = MXC_CRMAP_APRA_UART2EN_OFFSET,
+		.get_rate = clk_uart_get_rate,
+		.enable = _clk_1bit_enable,
+		.disable = _clk_1bit_disable,
+	}, {
+		.id = 2,
+		.parent = &perclk_clk,
+		.enable_reg = MXC_CRMAP_APRA,
+		.enable_shift = MXC_CRMAP_APRA_UART3EN_OFFSET,
+		.get_rate = clk_uart_get_rate,
+		.enable = _clk_1bit_enable,
+		.disable = _clk_1bit_disable,
+	},
+};
+/* uart_clk stuff end */
+
+/* sdhc_clk stuff */
+static struct clk nfc_clk;
+
+static unsigned long clk_nfc_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) /
+		CRM_1DIVIDER(MXC_CRMAP_ACDER2, NFCDIV);
+}
+
+static struct clk nfc_clk = {
+	.parent = &ahb_clk,
+	.enable_reg = MXC_CRMAP_ACDER2,
+	.enable_shift = MXC_CRMAP_ACDER2_NFCEN_OFFSET,
+	.get_rate = clk_nfc_get_rate,
+	.enable = _clk_1bit_enable,
+	.disable = _clk_1bit_disable,
+};
+/* sdhc_clk stuff end */
+
+/* sdhc_clk stuff */
+static struct clk sdhc_clk[];
+
+static struct clk *clk_sdhc_parent(struct clk *clk)
+{
+	u32 aprb;
+	u8 sel;
+	u32 mask;
+	int offset;
+
+	aprb = __raw_readl(MXC_CRMAP_APRB);
+
+	switch (clk->id) {
+	case 0:
+		mask = MXC_CRMAP_APRB_SDHC1_ISEL_MASK;
+		offset = MXC_CRMAP_APRB_SDHC1_ISEL_OFFSET;
+		break;
+	case 1:
+		mask = MXC_CRMAP_APRB_SDHC2_ISEL_MASK;
+		offset = MXC_CRMAP_APRB_SDHC2_ISEL_OFFSET;
+		break;
+	default:
+		BUG();
+	}
+	sel = (aprb & mask) >> offset;
+
+	switch (sel) {
+	case 0:
+		return &ckih_clk;
+	case 1:
+		return &ckih_x2_clk;
+	}
+	return &usb_clk;
+}
+
+static unsigned long clk_sdhc_get_rate(struct clk *clk)
+{
+	u32 div;
+
+	switch (clk->id) {
+	case 0:
+		div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRB, SDHC1_DIV);
+		break;
+	case 1:
+		div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRB, SDHC2_DIV);
+		break;
+	default:
+		BUG();
+	}
+
+	return clk_get_rate(clk->parent) / div;
+}
+
+static int clk_sdhc_enable(struct clk *clk)
+{
+	u32 amlpmre1, aprb;
+
+	amlpmre1 = __raw_readl(MXC_CRMAP_AMLPMRE1);
+	aprb = __raw_readl(MXC_CRMAP_APRB);
+	switch (clk->id) {
+	case 0:
+		amlpmre1 |= (0x7 << MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET);
+		aprb |= (0x1 << MXC_CRMAP_APRB_SDHC1EN_OFFSET);
+		break;
+	case 1:
+		amlpmre1 |= (0x7 << MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET);
+		aprb |= (0x1 << MXC_CRMAP_APRB_SDHC2EN_OFFSET);
+		break;
+	}
+	__raw_writel(amlpmre1, MXC_CRMAP_AMLPMRE1);
+	__raw_writel(aprb, MXC_CRMAP_APRB);
+	return 0;
+}
+
+static void clk_sdhc_disable(struct clk *clk)
+{
+	u32 amlpmre1, aprb;
+
+	amlpmre1 = __raw_readl(MXC_CRMAP_AMLPMRE1);
+	aprb = __raw_readl(MXC_CRMAP_APRB);
+	switch (clk->id) {
+	case 0:
+		amlpmre1 &= ~(0x7 << MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET);
+		aprb &= ~(0x1 << MXC_CRMAP_APRB_SDHC1EN_OFFSET);
+		break;
+	case 1:
+		amlpmre1 &= ~(0x7 << MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET);
+		aprb &= ~(0x1 << MXC_CRMAP_APRB_SDHC2EN_OFFSET);
+		break;
+	}
+	__raw_writel(amlpmre1, MXC_CRMAP_AMLPMRE1);
+	__raw_writel(aprb, MXC_CRMAP_APRB);
+}
+
+static struct clk sdhc_clk[] = {
+	{
+		.id = 0,
+		.get_rate = clk_sdhc_get_rate,
+		.enable = clk_sdhc_enable,
+		.disable = clk_sdhc_disable,
+	}, {
+		.id = 1,
+		.get_rate = clk_sdhc_get_rate,
+		.enable = clk_sdhc_enable,
+		.disable = clk_sdhc_disable,
+	},
+};
+/* sdhc_clk stuff end */
+
+/* wdog_clk stuff */
+static struct clk wdog_clk[] = {
+	{
+		.id = 0,
+		.parent = &ipg_clk,
+		.enable_reg = MXC_CRMAP_AMLPMRD,
+		.enable_shift = MXC_CRMAP_AMLPMRD_MLPMD7_OFFSET,
+		.enable = _clk_3bit_enable,
+		.disable = _clk_3bit_disable,
+	}, {
+		.id = 1,
+		.parent = &ipg_clk,
+		.enable_reg = MXC_CRMAP_AMLPMRD,
+		.enable_shift = MXC_CRMAP_AMLPMRD_MLPMD3_OFFSET,
+		.enable = _clk_3bit_enable,
+		.disable = _clk_3bit_disable,
+	},
+};
+/* wdog_clk stuff end */
+
+/* gpt_clk stuff */
+static struct clk gpt_clk = {
+	.parent = &ipg_clk,
+	.enable_reg = MXC_CRMAP_AMLPMRC,
+	.enable_shift = MXC_CRMAP_AMLPMRC_MLPMC4_OFFSET,
+	.enable = _clk_3bit_enable,
+	.disable = _clk_3bit_disable,
+};
+/* gpt_clk stuff end */
+
+/* cspi_clk stuff */
+static struct clk cspi_clk[] = {
+	{
+		.id = 0,
+		.parent = &ipg_clk,
+		.enable_reg = MXC_CRMAP_AMLPMRE2,
+		.enable_shift = MXC_CRMAP_AMLPMRE2_MLPME0_OFFSET,
+		.enable = _clk_3bit_enable,
+		.disable = _clk_3bit_disable,
+	}, {
+		.id = 1,
+		.parent = &ipg_clk,
+		.enable_reg = MXC_CRMAP_AMLPMRE1,
+		.enable_shift = MXC_CRMAP_AMLPMRE1_MLPME6_OFFSET,
+		.enable = _clk_3bit_enable,
+		.disable = _clk_3bit_disable,
+	},
+};
+/* cspi_clk stuff end */
+
+#define _REGISTER_CLOCK(d, n, c) \
+	{ \
+		.dev_id = d, \
+		.con_id = n, \
+		.clk = &c, \
+	},
+
+static struct clk_lookup lookups[] = {
+	_REGISTER_CLOCK("imx-uart.0", NULL, uart_clk[0])
+	_REGISTER_CLOCK("imx-uart.1", NULL, uart_clk[1])
+	_REGISTER_CLOCK("imx-uart.2", NULL, uart_clk[2])
+	_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc_clk[0])
+	_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc_clk[1])
+	_REGISTER_CLOCK("mxc-wdt.0", NULL, wdog_clk[0])
+	_REGISTER_CLOCK("spi_imx.0", NULL, cspi_clk[0])
+	_REGISTER_CLOCK("spi_imx.1", NULL, cspi_clk[1])
+};
+
+int __init mxc91231_clocks_init(unsigned long fref)
+{
+	void __iomem *gpt_base;
+	int i;
+
+	ckih_rate = fref;
+
+	usb_clk.parent = clk_usb_parent(&usb_clk);
+	sdhc_clk[0].parent = clk_sdhc_parent(&sdhc_clk[0]);
+	sdhc_clk[1].parent = clk_sdhc_parent(&sdhc_clk[1]);
+
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
+
+	gpt_base = MXC91231_IO_ADDRESS(MXC91231_GPT1_BASE_ADDR);
+	mxc_timer_init(&gpt_clk, gpt_base, MXC91231_INT_GPT);
+
+	return 0;
+}
diff --git a/arch/arm/mach-mxc91231/crm_regs.h b/arch/arm/mach-mxc91231/crm_regs.h
new file mode 100644
index 00000000000..ce4f5905818
--- /dev/null
+++ b/arch/arm/mach-mxc91231/crm_regs.h
@@ -0,0 +1,399 @@
+/*
+ * Copyright 2006 Freescale Semiconductor, Inc.
+ * Copyright 2006-2007 Motorola, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_
+#define _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_
+
+#define CKIL_CLK_FREQ			32768
+
+#define MXC_CRM_AP_BASE			MXC91231_IO_ADDRESS(MXC91231_CRM_AP_BASE_ADDR)
+#define MXC_CRM_COM_BASE		MXC91231_IO_ADDRESS(MXC91231_CRM_COM_BASE_ADDR)
+#define MXC_DSM_BASE			MXC91231_IO_ADDRESS(MXC91231_DSM_BASE_ADDR)
+#define MXC_PLL0_BASE			MXC91231_IO_ADDRESS(MXC91231_PLL0_BASE_ADDR)
+#define MXC_PLL1_BASE			MXC91231_IO_ADDRESS(MXC91231_PLL1_BASE_ADDR)
+#define MXC_PLL2_BASE			MXC91231_IO_ADDRESS(MXC91231_PLL2_BASE_ADDR)
+#define MXC_CLKCTL_BASE			MXC91231_IO_ADDRESS(MXC91231_CLKCTL_BASE_ADDR)
+
+/* PLL Register Offsets */
+#define MXC_PLL_DP_CTL			0x00
+#define MXC_PLL_DP_CONFIG		0x04
+#define MXC_PLL_DP_OP			0x08
+#define MXC_PLL_DP_MFD			0x0C
+#define MXC_PLL_DP_MFN			0x10
+#define MXC_PLL_DP_HFS_OP		0x1C
+#define MXC_PLL_DP_HFS_MFD		0x20
+#define MXC_PLL_DP_HFS_MFN		0x24
+
+/* PLL Register Bit definitions */
+#define MXC_PLL_DP_CTL_DPDCK0_2_EN	0x1000
+#define MXC_PLL_DP_CTL_ADE		0x800
+#define MXC_PLL_DP_CTL_REF_CLK_DIV	0x400
+#define MXC_PLL_DP_CTL_HFSM		0x80
+#define MXC_PLL_DP_CTL_PRE		0x40
+#define MXC_PLL_DP_CTL_UPEN		0x20
+#define MXC_PLL_DP_CTL_RST		0x10
+#define MXC_PLL_DP_CTL_RCP		0x8
+#define MXC_PLL_DP_CTL_PLM		0x4
+#define MXC_PLL_DP_CTL_BRM0		0x2
+#define MXC_PLL_DP_CTL_LRF		0x1
+
+#define MXC_PLL_DP_OP_MFI_OFFSET	4
+#define MXC_PLL_DP_OP_MFI_MASK		0xF
+#define MXC_PLL_DP_OP_PDF_OFFSET	0
+#define MXC_PLL_DP_OP_PDF_MASK		0xF
+
+#define MXC_PLL_DP_MFD_OFFSET		0
+#define MXC_PLL_DP_MFD_MASK		0x7FFFFFF
+
+#define MXC_PLL_DP_MFN_OFFSET		0
+#define MXC_PLL_DP_MFN_MASK		0x7FFFFFF
+
+/* CRM AP Register Offsets */
+#define MXC_CRMAP_ASCSR			(MXC_CRM_AP_BASE + 0x00)
+#define MXC_CRMAP_ACDR			(MXC_CRM_AP_BASE + 0x04)
+#define MXC_CRMAP_ACDER1		(MXC_CRM_AP_BASE + 0x08)
+#define MXC_CRMAP_ACDER2		(MXC_CRM_AP_BASE + 0x0C)
+#define MXC_CRMAP_ACGCR			(MXC_CRM_AP_BASE + 0x10)
+#define MXC_CRMAP_ACCGCR		(MXC_CRM_AP_BASE + 0x14)
+#define MXC_CRMAP_AMLPMRA		(MXC_CRM_AP_BASE + 0x18)
+#define MXC_CRMAP_AMLPMRB		(MXC_CRM_AP_BASE + 0x1C)
+#define MXC_CRMAP_AMLPMRC		(MXC_CRM_AP_BASE + 0x20)
+#define MXC_CRMAP_AMLPMRD		(MXC_CRM_AP_BASE + 0x24)
+#define MXC_CRMAP_AMLPMRE1		(MXC_CRM_AP_BASE + 0x28)
+#define MXC_CRMAP_AMLPMRE2		(MXC_CRM_AP_BASE + 0x2C)
+#define MXC_CRMAP_AMLPMRF		(MXC_CRM_AP_BASE + 0x30)
+#define MXC_CRMAP_AMLPMRG		(MXC_CRM_AP_BASE + 0x34)
+#define MXC_CRMAP_APGCR			(MXC_CRM_AP_BASE + 0x38)
+#define MXC_CRMAP_ACSR			(MXC_CRM_AP_BASE + 0x3C)
+#define MXC_CRMAP_ADCR			(MXC_CRM_AP_BASE + 0x40)
+#define MXC_CRMAP_ACR			(MXC_CRM_AP_BASE + 0x44)
+#define MXC_CRMAP_AMCR			(MXC_CRM_AP_BASE + 0x48)
+#define MXC_CRMAP_APCR			(MXC_CRM_AP_BASE + 0x4C)
+#define MXC_CRMAP_AMORA			(MXC_CRM_AP_BASE + 0x50)
+#define MXC_CRMAP_AMORB			(MXC_CRM_AP_BASE + 0x54)
+#define MXC_CRMAP_AGPR			(MXC_CRM_AP_BASE + 0x58)
+#define MXC_CRMAP_APRA			(MXC_CRM_AP_BASE + 0x5C)
+#define MXC_CRMAP_APRB			(MXC_CRM_AP_BASE + 0x60)
+#define MXC_CRMAP_APOR			(MXC_CRM_AP_BASE + 0x64)
+#define MXC_CRMAP_ADFMR			(MXC_CRM_AP_BASE + 0x68)
+
+/* CRM AP Register Bit definitions */
+#define MXC_CRMAP_ASCSR_CRS			0x10000
+#define MXC_CRMAP_ASCSR_AP_PATDIV2_OFFSET	15
+#define MXC_CRMAP_ASCSR_AP_PATREF_DIV2		0x8000
+#define MXC_CRMAP_ASCSR_USBSEL_OFFSET		13
+#define MXC_CRMAP_ASCSR_USBSEL_MASK		(0x3 << 13)
+#define MXC_CRMAP_ASCSR_CSISEL_OFFSET		11
+#define MXC_CRMAP_ASCSR_CSISEL_MASK		(0x3 << 11)
+#define MXC_CRMAP_ASCSR_SSI2SEL_OFFSET		7
+#define MXC_CRMAP_ASCSR_SSI2SEL_MASK		(0x3 << 7)
+#define MXC_CRMAP_ASCSR_SSI1SEL_OFFSET		5
+#define MXC_CRMAP_ASCSR_SSI1SEL_MASK		(0x3 << 5)
+#define MXC_CRMAP_ASCSR_APSEL_OFFSET		3
+#define MXC_CRMAP_ASCSR_APSEL_MASK		(0x3 << 3)
+#define MXC_CRMAP_ASCSR_AP_PATDIV1_OFFSET	2
+#define MXC_CRMAP_ASCSR_AP_PATREF_DIV1		0x4
+#define MXC_CRMAP_ASCSR_APISEL			0x1
+
+#define MXC_CRMAP_ACDR_ARMDIV_OFFSET		8
+#define MXC_CRMAP_ACDR_ARMDIV_MASK		(0xF << 8)
+#define MXC_CRMAP_ACDR_AHBDIV_OFFSET		4
+#define MXC_CRMAP_ACDR_AHBDIV_MASK		(0xF << 4)
+#define MXC_CRMAP_ACDR_IPDIV_OFFSET		0
+#define MXC_CRMAP_ACDR_IPDIV_MASK		0xF
+
+#define MXC_CRMAP_ACDER1_CSIEN_OFFSET		30
+#define MXC_CRMAP_ACDER1_CSIDIV_OFFSET		24
+#define MXC_CRMAP_ACDER1_CSIDIV_MASK		(0x3F << 24)
+#define MXC_CRMAP_ACDER1_SSI2EN_OFFSET		14
+#define MXC_CRMAP_ACDER1_SSI2DIV_OFFSET		8
+#define MXC_CRMAP_ACDER1_SSI2DIV_MASK		(0x3F << 8)
+#define MXC_CRMAP_ACDER1_SSI1EN_OFFSET		6
+#define MXC_CRMAP_ACDER1_SSI1DIV_OFFSET		0
+#define MXC_CRMAP_ACDER1_SSI1DIV_MASK		0x3F
+
+#define MXC_CRMAP_ACDER2_CRCT_CLK_DIV_OFFSET	24
+#define MXC_CRMAP_ACDER2_CRCT_CLK_DIV_MASK	(0x7 << 24)
+#define MXC_CRMAP_ACDER2_NFCEN_OFFSET		20
+#define MXC_CRMAP_ACDER2_NFCDIV_OFFSET		16
+#define MXC_CRMAP_ACDER2_NFCDIV_MASK		(0xF << 16)
+#define MXC_CRMAP_ACDER2_USBEN_OFFSET		12
+#define MXC_CRMAP_ACDER2_USBDIV_OFFSET		8
+#define MXC_CRMAP_ACDER2_USBDIV_MASK		(0xF << 8)
+#define MXC_CRMAP_ACDER2_BAUD_ISEL_OFFSET	5
+#define MXC_CRMAP_ACDER2_BAUD_ISEL_MASK		(0x3 << 5)
+#define MXC_CRMAP_ACDER2_BAUDDIV_OFFSET		0
+#define MXC_CRMAP_ACDER2_BAUDDIV_MASK		0xF
+
+#define MXC_CRMAP_AMLPMRA_MLPMA7_OFFSET		22
+#define MXC_CRMAP_AMLPMRA_MLPMA7_MASK		(0x7 << 22)
+#define MXC_CRMAP_AMLPMRA_MLPMA6_OFFSET		19
+#define MXC_CRMAP_AMLPMRA_MLPMA6_MASK		(0x7 << 19)
+#define MXC_CRMAP_AMLPMRA_MLPMA4_OFFSET		12
+#define MXC_CRMAP_AMLPMRA_MLPMA4_MASK		(0x7 << 12)
+#define MXC_CRMAP_AMLPMRA_MLPMA3_OFFSET		9
+#define MXC_CRMAP_AMLPMRA_MLPMA3_MASK		(0x7 << 9)
+#define MXC_CRMAP_AMLPMRA_MLPMA2_OFFSET		6
+#define MXC_CRMAP_AMLPMRA_MLPMA2_MASK		(0x7 << 6)
+#define MXC_CRMAP_AMLPMRA_MLPMA1_OFFSET		3
+#define MXC_CRMAP_AMLPMRA_MLPMA1_MASK		(0x7 << 3)
+
+#define MXC_CRMAP_AMLPMRB_MLPMB0_OFFSET		0
+#define MXC_CRMAP_AMLPMRB_MLPMB0_MASK		0x7
+
+#define MXC_CRMAP_AMLPMRC_MLPMC9_OFFSET		28
+#define MXC_CRMAP_AMLPMRC_MLPMC9_MASK		(0x7 << 28)
+#define MXC_CRMAP_AMLPMRC_MLPMC7_OFFSET		22
+#define MXC_CRMAP_AMLPMRC_MLPMC7_MASK		(0x7 << 22)
+#define MXC_CRMAP_AMLPMRC_MLPMC5_OFFSET		16
+#define MXC_CRMAP_AMLPMRC_MLPMC5_MASK		(0x7 << 16)
+#define MXC_CRMAP_AMLPMRC_MLPMC4_OFFSET		12
+#define MXC_CRMAP_AMLPMRC_MLPMC4_MASK		(0x7 << 12)
+#define MXC_CRMAP_AMLPMRC_MLPMC3_OFFSET		9
+#define MXC_CRMAP_AMLPMRC_MLPMC3_MASK		(0x7 << 9)
+#define MXC_CRMAP_AMLPMRC_MLPMC2_OFFSET		6
+#define MXC_CRMAP_AMLPMRC_MLPMC2_MASK		(0x7 << 6)
+#define MXC_CRMAP_AMLPMRC_MLPMC1_OFFSET		3
+#define MXC_CRMAP_AMLPMRC_MLPMC1_MASK		(0x7 << 3)
+#define MXC_CRMAP_AMLPMRC_MLPMC0_OFFSET		0
+#define MXC_CRMAP_AMLPMRC_MLPMC0_MASK		0x7
+
+#define MXC_CRMAP_AMLPMRD_MLPMD7_OFFSET		22
+#define MXC_CRMAP_AMLPMRD_MLPMD7_MASK		(0x7 << 22)
+#define MXC_CRMAP_AMLPMRD_MLPMD4_OFFSET		12
+#define MXC_CRMAP_AMLPMRD_MLPMD4_MASK		(0x7 << 12)
+#define MXC_CRMAP_AMLPMRD_MLPMD3_OFFSET		9
+#define MXC_CRMAP_AMLPMRD_MLPMD3_MASK		(0x7 << 9)
+#define MXC_CRMAP_AMLPMRD_MLPMD2_OFFSET		6
+#define MXC_CRMAP_AMLPMRD_MLPMD2_MASK		(0x7 << 6)
+#define MXC_CRMAP_AMLPMRD_MLPMD0_OFFSET		0
+#define MXC_CRMAP_AMLPMRD_MLPMD0_MASK		0x7
+
+#define MXC_CRMAP_AMLPMRE1_MLPME9_OFFSET	28
+#define MXC_CRMAP_AMLPMRE1_MLPME9_MASK		(0x7 << 28)
+#define MXC_CRMAP_AMLPMRE1_MLPME8_OFFSET	25
+#define MXC_CRMAP_AMLPMRE1_MLPME8_MASK		(0x7 << 25)
+#define MXC_CRMAP_AMLPMRE1_MLPME7_OFFSET	22
+#define MXC_CRMAP_AMLPMRE1_MLPME7_MASK		(0x7 << 22)
+#define MXC_CRMAP_AMLPMRE1_MLPME6_OFFSET	19
+#define MXC_CRMAP_AMLPMRE1_MLPME6_MASK		(0x7 << 19)
+#define MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET	16
+#define MXC_CRMAP_AMLPMRE1_MLPME5_MASK		(0x7 << 16)
+#define MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET	12
+#define MXC_CRMAP_AMLPMRE1_MLPME4_MASK		(0x7 << 12)
+#define MXC_CRMAP_AMLPMRE1_MLPME3_OFFSET	9
+#define MXC_CRMAP_AMLPMRE1_MLPME3_MASK		(0x7 << 9)
+#define MXC_CRMAP_AMLPMRE1_MLPME2_OFFSET	6
+#define MXC_CRMAP_AMLPMRE1_MLPME2_MASK		(0x7 << 6)
+#define MXC_CRMAP_AMLPMRE1_MLPME1_OFFSET	3
+#define MXC_CRMAP_AMLPMRE1_MLPME1_MASK		(0x7 << 3)
+#define MXC_CRMAP_AMLPMRE1_MLPME0_OFFSET	0
+#define MXC_CRMAP_AMLPMRE1_MLPME0_MASK		0x7
+
+#define MXC_CRMAP_AMLPMRE2_MLPME0_OFFSET	0
+#define MXC_CRMAP_AMLPMRE2_MLPME0_MASK		0x7
+
+#define MXC_CRMAP_AMLPMRF_MLPMF6_OFFSET		19
+#define MXC_CRMAP_AMLPMRF_MLPMF6_MASK		(0x7 << 19)
+#define MXC_CRMAP_AMLPMRF_MLPMF5_OFFSET		16
+#define MXC_CRMAP_AMLPMRF_MLPMF5_MASK		(0x7 << 16)
+#define MXC_CRMAP_AMLPMRF_MLPMF3_OFFSET		9
+#define MXC_CRMAP_AMLPMRF_MLPMF3_MASK		(0x7 << 9)
+#define MXC_CRMAP_AMLPMRF_MLPMF2_OFFSET		6
+#define MXC_CRMAP_AMLPMRF_MLPMF2_MASK		(0x7 << 6)
+#define MXC_CRMAP_AMLPMRF_MLPMF1_OFFSET		3
+#define MXC_CRMAP_AMLPMRF_MLPMF1_MASK		(0x7 << 3)
+#define MXC_CRMAP_AMLPMRF_MLPMF0_OFFSET		0
+#define MXC_CRMAP_AMLPMRF_MLPMF0_MASK		(0x7 << 0)
+
+#define MXC_CRMAP_AMLPMRG_MLPMG9_OFFSET		28
+#define MXC_CRMAP_AMLPMRG_MLPMG9_MASK		(0x7 << 28)
+#define MXC_CRMAP_AMLPMRG_MLPMG7_OFFSET		22
+#define MXC_CRMAP_AMLPMRG_MLPMG7_MASK		(0x7 << 22)
+#define MXC_CRMAP_AMLPMRG_MLPMG6_OFFSET		19
+#define MXC_CRMAP_AMLPMRG_MLPMG6_MASK		(0x7 << 19)
+#define MXC_CRMAP_AMLPMRG_MLPMG5_OFFSET		16
+#define MXC_CRMAP_AMLPMRG_MLPMG5_MASK		(0x7 << 16)
+#define MXC_CRMAP_AMLPMRG_MLPMG4_OFFSET		12
+#define MXC_CRMAP_AMLPMRG_MLPMG4_MASK		(0x7 << 12)
+#define MXC_CRMAP_AMLPMRG_MLPMG3_OFFSET		9
+#define MXC_CRMAP_AMLPMRG_MLPMG3_MASK		(0x7 << 9)
+#define MXC_CRMAP_AMLPMRG_MLPMG2_OFFSET		6
+#define MXC_CRMAP_AMLPMRG_MLPMG2_MASK		(0x7 << 6)
+#define MXC_CRMAP_AMLPMRG_MLPMG1_OFFSET		3
+#define MXC_CRMAP_AMLPMRG_MLPMG1_MASK		(0x7 << 3)
+#define MXC_CRMAP_AMLPMRG_MLPMG0_OFFSET		0
+#define MXC_CRMAP_AMLPMRG_MLPMG0_MASK		0x7
+
+#define MXC_CRMAP_AGPR_IPUPAD_OFFSET		20
+#define MXC_CRMAP_AGPR_IPUPAD_MASK		(0x7 << 20)
+
+#define MXC_CRMAP_APRA_EL1TEN_OFFSET		29
+#define MXC_CRMAP_APRA_SIMEN_OFFSET		24
+#define MXC_CRMAP_APRA_UART3DIV_OFFSET		17
+#define MXC_CRMAP_APRA_UART3DIV_MASK		(0xF << 17)
+#define MXC_CRMAP_APRA_UART3EN_OFFSET		16
+#define MXC_CRMAP_APRA_SAHARA_DIV2_CLKEN_OFFSET	14
+#define MXC_CRMAP_APRA_MQSPIEN_OFFSET		13
+#define MXC_CRMAP_APRA_UART2EN_OFFSET		8
+#define MXC_CRMAP_APRA_UART1EN_OFFSET		0
+
+#define MXC_CRMAP_APRB_SDHC2_ISEL_OFFSET	13
+#define MXC_CRMAP_APRB_SDHC2_ISEL_MASK		(0x7 << 13)
+#define MXC_CRMAP_APRB_SDHC2_DIV_OFFSET		9
+#define MXC_CRMAP_APRB_SDHC2_DIV_MASK		(0xF << 9)
+#define MXC_CRMAP_APRB_SDHC2EN_OFFSET		8
+#define MXC_CRMAP_APRB_SDHC1_ISEL_OFFSET	5
+#define MXC_CRMAP_APRB_SDHC1_ISEL_MASK		(0x7 << 5)
+#define MXC_CRMAP_APRB_SDHC1_DIV_OFFSET		1
+#define MXC_CRMAP_APRB_SDHC1_DIV_MASK		(0xF << 1)
+#define MXC_CRMAP_APRB_SDHC1EN_OFFSET		0
+
+#define MXC_CRMAP_ACSR_ADS_OFFSET		8
+#define MXC_CRMAP_ACSR_ADS			(0x1 << 8)
+#define MXC_CRMAP_ACSR_ACS			0x1
+
+#define MXC_CRMAP_ADCR_LFDF_0			(0x0 << 8)
+#define MXC_CRMAP_ADCR_LFDF_2			(0x1 << 8)
+#define MXC_CRMAP_ADCR_LFDF_4			(0x2 << 8)
+#define MXC_CRMAP_ADCR_LFDF_8			(0x3 << 8)
+#define MXC_CRMAP_ADCR_LFDF_OFFSET		8
+#define MXC_CRMAP_ADCR_LFDF_MASK		(0x3 << 8)
+#define MXC_CRMAP_ADCR_ALT_PLL			0x80
+#define MXC_CRMAP_ADCR_DFS_DIVEN		0x20
+#define MXC_CRMAP_ADCR_DIV_BYP			0x2
+#define MXC_CRMAP_ADCR_VSTAT			0x8
+#define MXC_CRMAP_ADCR_TSTAT			0x10
+#define MXC_CRMAP_ADCR_DVFS_VCTRL		0x10
+#define MXC_CRMAP_ADCR_CLK_ON			0x40
+
+#define MXC_CRMAP_ADFMR_FC_OFFSET		16
+#define MXC_CRMAP_ADFMR_FC_MASK			(0x1F << 16)
+#define MXC_CRMAP_ADFMR_MF_OFFSET		1
+#define MXC_CRMAP_ADFMR_MF_MASK			(0x3FF << 1)
+#define MXC_CRMAP_ADFMR_DFM_CLK_READY		0x1
+#define MXC_CRMAP_ADFMR_DFM_PWR_DOWN		0x8000
+
+#define MXC_CRMAP_ACR_CKOHS_HIGH		(1 << 18)
+#define MXC_CRMAP_ACR_CKOS_HIGH			(1 << 16)
+#define MXC_CRMAP_ACR_CKOHS_MASK		(0x7 << 12)
+#define MXC_CRMAP_ACR_CKOHD			(1 << 11)
+#define MXC_CRMAP_ACR_CKOHDIV_MASK		(0xF << 8)
+#define MXC_CRMAP_ACR_CKOHDIV_OFFSET		8
+#define MXC_CRMAP_ACR_CKOD			(1 << 7)
+#define MXC_CRMAP_ACR_CKOS_MASK			(0x7 << 4)
+
+/* AP Warm reset */
+#define MXC_CRMAP_AMCR_SW_AP			(1 << 14)
+
+/* Bit definitions of ACGCR in CRM_AP for tree level clock gating */
+#define MXC_CRMAP_ACGCR_ACG0_STOP_WAIT		0x00000001
+#define MXC_CRMAP_ACGCR_ACG0_STOP		0x00000003
+#define MXC_CRMAP_ACGCR_ACG0_RUN		0x00000007
+#define MXC_CRMAP_ACGCR_ACG0_DISABLED		0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG1_STOP_WAIT		0x00000008
+#define MXC_CRMAP_ACGCR_ACG1_STOP		0x00000018
+#define MXC_CRMAP_ACGCR_ACG1_RUN		0x00000038
+#define MXC_CRMAP_ACGCR_ACG1_DISABLED		0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG2_STOP_WAIT		0x00000040
+#define MXC_CRMAP_ACGCR_ACG2_STOP		0x000000C0
+#define MXC_CRMAP_ACGCR_ACG2_RUN		0x000001C0
+#define MXC_CRMAP_ACGCR_ACG2_DISABLED		0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG3_STOP_WAIT		0x00000200
+#define MXC_CRMAP_ACGCR_ACG3_STOP		0x00000600
+#define MXC_CRMAP_ACGCR_ACG3_RUN		0x00000E00
+#define MXC_CRMAP_ACGCR_ACG3_DISABLED		0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG4_STOP_WAIT		0x00001000
+#define MXC_CRMAP_ACGCR_ACG4_STOP		0x00003000
+#define MXC_CRMAP_ACGCR_ACG4_RUN		0x00007000
+#define MXC_CRMAP_ACGCR_ACG4_DISABLED		0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG5_STOP_WAIT		0x00010000
+#define MXC_CRMAP_ACGCR_ACG5_STOP		0x00030000
+#define MXC_CRMAP_ACGCR_ACG5_RUN		0x00070000
+#define MXC_CRMAP_ACGCR_ACG5_DISABLED		0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG6_STOP_WAIT		0x00080000
+#define MXC_CRMAP_ACGCR_ACG6_STOP		0x00180000
+#define MXC_CRMAP_ACGCR_ACG6_RUN		0x00380000
+#define MXC_CRMAP_ACGCR_ACG6_DISABLED		0x00000000
+
+#define NUM_GATE_CTRL				6
+
+/* CRM COM Register Offsets */
+#define MXC_CRMCOM_CSCR				(MXC_CRM_COM_BASE + 0x0C)
+#define MXC_CRMCOM_CCCR				(MXC_CRM_COM_BASE + 0x10)
+
+/* CRM COM Bit Definitions */
+#define MXC_CRMCOM_CSCR_PPD1			0x08000000
+#define MXC_CRMCOM_CSCR_CKOHSEL			(1 << 18)
+#define MXC_CRMCOM_CSCR_CKOSEL			(1 << 17)
+#define MXC_CRMCOM_CCCR_CC_DIV_OFFSET		8
+#define MXC_CRMCOM_CCCR_CC_DIV_MASK		(0x1F << 8)
+#define MXC_CRMCOM_CCCR_CC_SEL_OFFSET		0
+#define MXC_CRMCOM_CCCR_CC_SEL_MASK		0x3
+
+/* DSM Register Offsets */
+#define MXC_DSM_SLEEP_TIME			(MXC_DSM_BASE + 0x0c)
+#define MXC_DSM_CONTROL0			(MXC_DSM_BASE + 0x20)
+#define MXC_DSM_CONTROL1			(MXC_DSM_BASE + 0x24)
+#define MXC_DSM_CTREN				(MXC_DSM_BASE + 0x28)
+#define MXC_DSM_WARM_PER			(MXC_DSM_BASE + 0x40)
+#define MXC_DSM_LOCK_PER			(MXC_DSM_BASE + 0x44)
+#define MXC_DSM_MGPER				(MXC_DSM_BASE + 0x4c)
+#define MXC_DSM_CRM_CONTROL			(MXC_DSM_BASE + 0x50)
+
+/* Bit definitions of various registers in DSM */
+#define MXC_DSM_CRM_CTRL_DVFS_BYP		0x00000008
+#define MXC_DSM_CRM_CTRL_DVFS_VCTRL		0x00000004
+#define MXC_DSM_CRM_CTRL_LPMD1			0x00000002
+#define MXC_DSM_CRM_CTRL_LPMD0			0x00000001
+#define MXC_DSM_CRM_CTRL_LPMD_STOP_MODE		0x00000000
+#define MXC_DSM_CRM_CTRL_LPMD_WAIT_MODE		0x00000001
+#define MXC_DSM_CRM_CTRL_LPMD_RUN_MODE		0x00000003
+#define MXC_DSM_CONTROL0_STBY_COMMIT_EN		0x00000200
+#define MXC_DSM_CONTROL0_MSTR_EN		0x00000001
+#define MXC_DSM_CONTROL0_RESTART		0x00000010
+/* Counter Block reset */
+#define MXC_DSM_CONTROL1_CB_RST			0x00000002
+/* State Machine reset */
+#define MXC_DSM_CONTROL1_SM_RST			0x00000004
+/* Bit needed to reset counter block */
+#define MXC_CONTROL1_RST_CNT32			0x00000008
+#define MXC_DSM_CONTROL1_RST_CNT32_EN		0x00000800
+#define MXC_DSM_CONTROL1_SLEEP			0x00000100
+#define MXC_DSM_CONTROL1_WAKEUP_DISABLE		0x00004000
+#define MXC_DSM_CTREN_CNT32			0x00000001
+
+/* Magic Fix enable bit */
+#define MXC_DSM_MGPER_EN_MGFX			0x80000000
+#define MXC_DSM_MGPER_PER_MASK			0x000003FF
+#define MXC_DSM_MGPER_PER(n)			(MXC_DSM_MGPER_PER_MASK & n)
+
+/* Address offsets of the CLKCTL registers */
+#define MXC_CLKCTL_GP_CTRL	(MXC_CLKCTL_BASE + 0x00)
+#define MXC_CLKCTL_GP_SER	(MXC_CLKCTL_BASE + 0x04)
+#define MXC_CLKCTL_GP_CER	(MXC_CLKCTL_BASE + 0x08)
+
+#endif /* _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_ */
diff --git a/arch/arm/mach-mxc91231/devices.c b/arch/arm/mach-mxc91231/devices.c
new file mode 100644
index 00000000000..353bd977b39
--- /dev/null
+++ b/arch/arm/mach-mxc91231/devices.c
@@ -0,0 +1,251 @@
+/*
+ * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/serial.h>
+#include <linux/gpio.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/imx-uart.h>
+
+static struct resource uart0[] = {
+	{
+		.start = MXC91231_UART1_BASE_ADDR,
+		.end = MXC91231_UART1_BASE_ADDR + 0x0B5,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC91231_INT_UART1_RX,
+		.end = MXC91231_INT_UART1_RX,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = MXC91231_INT_UART1_TX,
+		.end = MXC91231_INT_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = MXC91231_INT_UART1_MINT,
+		.end = MXC91231_INT_UART1_MINT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_uart_device0 = {
+	.name = "imx-uart",
+	.id = 0,
+	.resource = uart0,
+	.num_resources = ARRAY_SIZE(uart0),
+};
+
+static struct resource uart1[] = {
+	{
+		.start = MXC91231_UART2_BASE_ADDR,
+		.end = MXC91231_UART2_BASE_ADDR + 0x0B5,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC91231_INT_UART2_RX,
+		.end = MXC91231_INT_UART2_RX,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = MXC91231_INT_UART2_TX,
+		.end = MXC91231_INT_UART2_TX,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = MXC91231_INT_UART2_MINT,
+		.end = MXC91231_INT_UART2_MINT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_uart_device1 = {
+	.name = "imx-uart",
+	.id = 1,
+	.resource = uart1,
+	.num_resources = ARRAY_SIZE(uart1),
+};
+
+static struct resource uart2[] = {
+	{
+		.start = MXC91231_UART3_BASE_ADDR,
+		.end = MXC91231_UART3_BASE_ADDR + 0x0B5,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC91231_INT_UART3_RX,
+		.end = MXC91231_INT_UART3_RX,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = MXC91231_INT_UART3_TX,
+		.end = MXC91231_INT_UART3_TX,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = MXC91231_INT_UART3_MINT,
+		.end = MXC91231_INT_UART3_MINT,
+		.flags = IORESOURCE_IRQ,
+
+	},
+};
+
+struct platform_device mxc_uart_device2 = {
+	.name = "imx-uart",
+	.id = 2,
+	.resource = uart2,
+	.num_resources = ARRAY_SIZE(uart2),
+};
+
+/* GPIO port description */
+static struct mxc_gpio_port mxc_gpio_ports[] = {
+	[0] = {
+		.chip.label = "gpio-0",
+		.base = MXC91231_IO_ADDRESS(MXC91231_GPIO1_AP_BASE_ADDR),
+		.irq = MXC91231_INT_GPIO1,
+		.virtual_irq_start = MXC_GPIO_IRQ_START,
+	},
+	[1] = {
+		.chip.label = "gpio-1",
+		.base = MXC91231_IO_ADDRESS(MXC91231_GPIO2_AP_BASE_ADDR),
+		.irq = MXC91231_INT_GPIO2,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
+	},
+	[2] = {
+		.chip.label = "gpio-2",
+		.base = MXC91231_IO_ADDRESS(MXC91231_GPIO3_AP_BASE_ADDR),
+		.irq = MXC91231_INT_GPIO3,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
+	},
+	[3] = {
+		.chip.label = "gpio-3",
+		.base = MXC91231_IO_ADDRESS(MXC91231_GPIO4_SH_BASE_ADDR),
+		.irq = MXC91231_INT_GPIO4,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
+	},
+};
+
+int __init mxc_register_gpios(void)
+{
+	return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports));
+}
+
+static struct resource mxc_nand_resources[] = {
+	{
+		.start	= MXC91231_NFC_BASE_ADDR,
+		.end	= MXC91231_NFC_BASE_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM
+	}, {
+		.start	= MXC91231_INT_NANDFC,
+		.end	= MXC91231_INT_NANDFC,
+		.flags	= IORESOURCE_IRQ
+	},
+};
+
+struct platform_device mxc_nand_device = {
+	.name = "mxc_nand",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_nand_resources),
+	.resource = mxc_nand_resources,
+};
+
+static struct resource mxc_sdhc0_resources[] = {
+	{
+		.start = MXC91231_MMC_SDHC1_BASE_ADDR,
+		.end = MXC91231_MMC_SDHC1_BASE_ADDR + SZ_16K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC91231_INT_MMC_SDHC1,
+		.end = MXC91231_INT_MMC_SDHC1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource mxc_sdhc1_resources[] = {
+	{
+		.start = MXC91231_MMC_SDHC2_BASE_ADDR,
+		.end = MXC91231_MMC_SDHC2_BASE_ADDR + SZ_16K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC91231_INT_MMC_SDHC2,
+		.end = MXC91231_INT_MMC_SDHC2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_sdhc_device0 = {
+	.name = "mxc-mmc",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_sdhc0_resources),
+	.resource = mxc_sdhc0_resources,
+};
+
+struct platform_device mxc_sdhc_device1 = {
+	.name = "mxc-mmc",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(mxc_sdhc1_resources),
+	.resource = mxc_sdhc1_resources,
+};
+
+static struct resource mxc_cspi0_resources[] = {
+	{
+		.start = MXC91231_CSPI1_BASE_ADDR,
+		.end = MXC91231_CSPI1_BASE_ADDR + 0x20,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC91231_INT_CSPI1,
+		.end = MXC91231_INT_CSPI1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_cspi_device0 = {
+	.name = "spi_imx",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_cspi0_resources),
+	.resource = mxc_cspi0_resources,
+};
+
+static struct resource mxc_cspi1_resources[] = {
+	{
+		.start = MXC91231_CSPI2_BASE_ADDR,
+		.end = MXC91231_CSPI2_BASE_ADDR + 0x20,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC91231_INT_CSPI2,
+		.end = MXC91231_INT_CSPI2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_cspi_device1 = {
+	.name = "spi_imx",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(mxc_cspi1_resources),
+	.resource = mxc_cspi1_resources,
+};
+
+static struct resource mxc_wdog0_resources[] = {
+	{
+		.start = MXC91231_WDOG1_BASE_ADDR,
+		.end = MXC91231_WDOG1_BASE_ADDR + 0x10,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device mxc_wdog_device0 = {
+	.name = "mxc-wdt",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_wdog0_resources),
+	.resource = mxc_wdog0_resources,
+};
diff --git a/arch/arm/mach-mxc91231/devices.h b/arch/arm/mach-mxc91231/devices.h
new file mode 100644
index 00000000000..72a2136ce27
--- /dev/null
+++ b/arch/arm/mach-mxc91231/devices.h
@@ -0,0 +1,13 @@
+extern struct platform_device mxc_uart_device0;
+extern struct platform_device mxc_uart_device1;
+extern struct platform_device mxc_uart_device2;
+
+extern struct platform_device mxc_nand_device;
+
+extern struct platform_device mxc_sdhc_device0;
+extern struct platform_device mxc_sdhc_device1;
+
+extern struct platform_device mxc_cspi_device0;
+extern struct platform_device mxc_cspi_device1;
+
+extern struct platform_device mxc_wdog_device0;
diff --git a/arch/arm/mach-mxc91231/magx-zn5.c b/arch/arm/mach-mxc91231/magx-zn5.c
new file mode 100644
index 00000000000..8757573b0a8
--- /dev/null
+++ b/arch/arm/mach-mxc91231/magx-zn5.c
@@ -0,0 +1,59 @@
+/*
+ * Copyright 2009 Dmitriy Taychenachev <dimichxp@gmail.com>
+ *
+ * This file is released under the GPLv2 or later.
+ */
+
+#include <linux/irq.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/time.h>
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
+#include <mach/imx-uart.h>
+
+#include "devices.h"
+
+static struct imxuart_platform_data uart_pdata = {
+};
+
+static struct imxmmc_platform_data sdhc_pdata = {
+};
+
+static void __init zn5_init(void)
+{
+	pm_power_off = mxc91231_power_off;
+
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+	mxc_register_device(&mxc_sdhc_device0, &sdhc_pdata);
+
+	mxc_register_device(&mxc_wdog_device0, NULL);
+
+	return;
+}
+
+static void __init zn5_timer_init(void)
+{
+	mxc91231_clocks_init(26000000); /* 26mhz ckih */
+}
+
+struct sys_timer zn5_timer = {
+	.init = zn5_timer_init,
+};
+
+MACHINE_START(MAGX_ZN5, "Motorola Zn5")
+	.phys_io	= MXC91231_AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((MXC91231_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params	= PHYS_OFFSET + 0x100,
+	.map_io		= mxc91231_map_io,
+	.init_irq	= mxc91231_init_irq,
+	.timer		= &zn5_timer,
+	.init_machine	= zn5_init,
+MACHINE_END
diff --git a/arch/arm/mach-mxc91231/mm.c b/arch/arm/mach-mxc91231/mm.c
new file mode 100644
index 00000000000..6becda3ff33
--- /dev/null
+++ b/arch/arm/mach-mxc91231/mm.c
@@ -0,0 +1,94 @@
+/*
+ *  Copyright (C) 1999,2000 Arm Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2004-2005 Freescale Semiconductor, Inc. All Rights Reserved.
+ *    - add MXC specific definitions
+ *  Copyright 2006 Motorola, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+
+/*
+ * This structure defines the MXC memory map.
+ */
+static struct map_desc mxc_io_desc[] __initdata = {
+	{
+		.virtual	= MXC91231_L2CC_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MXC91231_L2CC_BASE_ADDR),
+		.length		= MXC91231_L2CC_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= MXC91231_X_MEMC_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MXC91231_X_MEMC_BASE_ADDR),
+		.length		= MXC91231_X_MEMC_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= MXC91231_ROMP_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MXC91231_ROMP_BASE_ADDR),
+		.length		= MXC91231_ROMP_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= MXC91231_AVIC_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MXC91231_AVIC_BASE_ADDR),
+		.length		= MXC91231_AVIC_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= MXC91231_AIPS1_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MXC91231_AIPS1_BASE_ADDR),
+		.length		= MXC91231_AIPS1_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= MXC91231_SPBA0_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MXC91231_SPBA0_BASE_ADDR),
+		.length		= MXC91231_SPBA0_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= MXC91231_SPBA1_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MXC91231_SPBA1_BASE_ADDR),
+		.length		= MXC91231_SPBA1_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= MXC91231_AIPS2_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MXC91231_AIPS2_BASE_ADDR),
+		.length		= MXC91231_AIPS2_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+/*
+ * This function initializes the memory map. It is called during the
+ * system startup to create static physical to virtual memory map for
+ * the IO modules.
+ */
+void __init mxc91231_map_io(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MXC91231);
+
+	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
+
+void __init mxc91231_init_irq(void)
+{
+	mxc_init_irq(MXC91231_IO_ADDRESS(MXC91231_AVIC_BASE_ADDR));
+}
diff --git a/arch/arm/mach-mxc91231/system.c b/arch/arm/mach-mxc91231/system.c
new file mode 100644
index 00000000000..736f7efd874
--- /dev/null
+++ b/arch/arm/mach-mxc91231/system.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2009 Dmitriy Taychenachev <dimichxp@gmail.com>
+ *
+ * This file is released under the GPLv2 or later.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include <asm/proc-fns.h>
+#include <mach/hardware.h>
+
+#include "crm_regs.h"
+
+#define WDOG_WCR		MXC91231_IO_ADDRESS(MXC91231_WDOG1_BASE_ADDR)
+#define WDOG_WCR_OUT_ENABLE	(1 << 6)
+#define WDOG_WCR_ASSERT		(1 << 5)
+
+void mxc91231_power_off(void)
+{
+	u16 wcr;
+
+	wcr = __raw_readw(WDOG_WCR);
+	wcr |= WDOG_WCR_OUT_ENABLE;
+	wcr &= ~WDOG_WCR_ASSERT;
+	__raw_writew(wcr, WDOG_WCR);
+}
+
+void mxc91231_arch_reset(char mode, const char *cmd)
+{
+	u32 amcr;
+
+	/* Reset the AP using CRM */
+	amcr = __raw_readl(MXC_CRMAP_AMCR);
+	amcr &= ~MXC_CRMAP_AMCR_SW_AP;
+	__raw_writel(amcr, MXC_CRMAP_AMCR);
+
+	mdelay(10);
+	cpu_reset(0);
+}
+
+void mxc91231_prepare_idle(void)
+{
+	u32 crm_ctl;
+
+	/* Go to WAIT mode after WFI */
+	crm_ctl = __raw_readl(MXC_DSM_CRM_CONTROL);
+	crm_ctl &= ~(MXC_DSM_CRM_CTRL_LPMD0 | MXC_DSM_CRM_CTRL_LPMD1);
+	crm_ctl |=  MXC_DSM_CRM_CTRL_LPMD_WAIT_MODE;
+	__raw_writel(crm_ctl, MXC_DSM_CRM_CONTROL);
+}
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index e342a2e6160..ca5c7c22634 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -34,12 +34,20 @@ config ARCH_MX3
 	help
 	  This enables support for systems based on the Freescale i.MX3 family
 
+config ARCH_MXC91231
+	bool "MXC91231-based"
+	select CPU_V6
+	select COMMON_CLKDEV
+	help
+	  This enables support for systems based on the Freescale MXC91231 family
+
 endchoice
 
 source "arch/arm/mach-mx1/Kconfig"
 source "arch/arm/mach-mx2/Kconfig"
 source "arch/arm/mach-mx3/Kconfig"
 source "arch/arm/mach-mx25/Kconfig"
+source "arch/arm/mach-mxc91231/Kconfig"
 
 endmenu
 
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 4e7af741239..286cb9b0a25 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -20,6 +20,7 @@ extern void mx25_map_io(void);
 extern void mx27_map_io(void);
 extern void mx31_map_io(void);
 extern void mx35_map_io(void);
+extern void mxc91231_map_io(void);
 extern void mxc_init_irq(void __iomem *);
 extern void mx1_init_irq(void);
 extern void mx21_init_irq(void);
@@ -27,6 +28,7 @@ extern void mx25_init_irq(void);
 extern void mx27_init_irq(void);
 extern void mx31_init_irq(void);
 extern void mx35_init_irq(void);
+extern void mxc91231_init_irq(void);
 extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
 extern int mx1_clocks_init(unsigned long fref);
 extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
@@ -34,9 +36,13 @@ extern int mx25_clocks_init(unsigned long fref);
 extern int mx27_clocks_init(unsigned long fref);
 extern int mx31_clocks_init(unsigned long fref);
 extern int mx35_clocks_init(void);
+extern int mxc91231_clocks_init(unsigned long fref);
 extern int mxc_register_gpios(void);
 extern int mxc_register_device(struct platform_device *pdev, void *data);
 extern void mxc_set_cpu_type(unsigned int type);
 extern void mxc_arch_reset_init(void __iomem *);
+extern void mxc91231_power_off(void);
+extern void mxc91231_arch_reset(int, const char *);
+extern void mxc91231_prepare_idle(void);
 
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index bf683de56b7..15b2b148a10 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -44,6 +44,14 @@
 #define UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
 #endif
 
+#ifdef CONFIG_ARCH_MXC91231
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
+#endif
+#include <mach/mxc91231.h>
+#define UART_PADDR	MXC91231_UART2_BASE_ADDR
+#define UART_VADDR	MXC91231_AIPS1_IO_ADDRESS(MXC91231_UART2_BASE_ADDR)
+#endif
 		.macro	addruart,rx
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index 569af3239c3..78db75475f6 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -46,6 +46,10 @@
 # include <mach/mx25.h>
 #endif
 
+#ifdef CONFIG_ARCH_MXC91231
+# include <mach/mxc91231.h>
+#endif
+
 #include <mach/mxc.h>
 
 #endif /* __ASM_ARCH_MXC_HARDWARE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index f39e016c1cc..ead9d592168 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -26,6 +26,8 @@
 #define MXC_GPIO_IRQS		(32 * 3)
 #elif defined CONFIG_ARCH_MX25
 #define MXC_GPIO_IRQS		(32 * 4)
+#elif defined CONFIG_ARCH_MXC91231
+#define MXC_GPIO_IRQS		(32 * 4)
 #endif
 
 /*
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index 42db7394111..d3afafdcc0e 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -24,6 +24,8 @@
 #define PHYS_OFFSET		UL(0x80000000)
 #elif defined CONFIG_ARCH_MX25
 #define PHYS_OFFSET		UL(0x80000000)
+#elif defined CONFIG_ARCH_MXC91231
+#define PHYS_OFFSET		UL(0x90000000)
 #endif
 
 #if defined(CONFIG_MX1_VIDEO)
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 882b816729b..51990536b84 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -30,6 +30,7 @@
 #define MXC_CPU_MX27		27
 #define MXC_CPU_MX31		31
 #define MXC_CPU_MX35		35
+#define MXC_CPU_MXC91231	91231
 
 #ifndef __ASSEMBLY__
 extern unsigned int __mxc_cpu_type;
@@ -107,13 +108,25 @@ extern unsigned int __mxc_cpu_type;
 # define cpu_is_mx35()		(0)
 #endif
 
+#ifdef CONFIG_ARCH_MXC91231
+# ifdef mxc_cpu_type
+#  undef mxc_cpu_type
+#  define mxc_cpu_type __mxc_cpu_type
+# else
+#  define mxc_cpu_type MXC_CPU_MXC91231
+# endif
+# define cpu_is_mxc91231()	(mxc_cpu_type == MXC_CPU_MXC91231)
+#else
+# define cpu_is_mxc91231()	(0)
+#endif
+
 #if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX2)
 #define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10)
 #define CSCR_L(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x4)
 #define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x8)
 #endif
 
-#define cpu_is_mx3()	(cpu_is_mx31() || cpu_is_mx35())
+#define cpu_is_mx3()	(cpu_is_mx31() || cpu_is_mx35() || cpu_is_mxc91231())
 #define cpu_is_mx2()	(cpu_is_mx21() || cpu_is_mx27())
 
 #endif /*  __ASM_ARCH_MXC_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mxc91231.h b/arch/arm/plat-mxc/include/mach/mxc91231.h
new file mode 100644
index 00000000000..81484d1ef23
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mxc91231.h
@@ -0,0 +1,315 @@
+/*
+ *  Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ *    - Platform specific register memory map
+ *
+ *  Copyright 2005-2007 Motorola, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __MACH_MXC91231_H__
+#define __MACH_MXC91231_H__
+
+/*
+ * L2CC
+ */
+#define MXC91231_L2CC_BASE_ADDR		0x30000000
+#define MXC91231_L2CC_BASE_ADDR_VIRT	0xF9000000
+#define MXC91231_L2CC_SIZE		SZ_64K
+
+/*
+ * AIPS 1
+ */
+#define MXC91231_AIPS1_BASE_ADDR	0x43F00000
+#define MXC91231_AIPS1_BASE_ADDR_VIRT	0xFC000000
+#define MXC91231_AIPS1_SIZE		SZ_1M
+
+#define MXC91231_AIPS1_CTRL_BASE_ADDR	MXC91231_AIPS1_BASE_ADDR
+#define MXC91231_MAX_BASE_ADDR		(MXC91231_AIPS1_BASE_ADDR + 0x04000)
+#define MXC91231_EVTMON_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0x08000)
+#define MXC91231_CLKCTL_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0x0C000)
+#define MXC91231_ETB_SLOT4_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0x10000)
+#define MXC91231_ETB_SLOT5_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0x14000)
+#define MXC91231_ECT_CTIO_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0x18000)
+#define MXC91231_I2C_BASE_ADDR		(MXC91231_AIPS1_BASE_ADDR + 0x80000)
+#define MXC91231_MU_BASE_ADDR		(MXC91231_AIPS1_BASE_ADDR + 0x88000)
+#define MXC91231_UART1_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0x90000)
+#define MXC91231_UART2_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0x94000)
+#define MXC91231_DSM_BASE_ADDR		(MXC91231_AIPS1_BASE_ADDR + 0x98000)
+#define MXC91231_OWIRE_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0x9C000)
+#define MXC91231_SSI1_BASE_ADDR		(MXC91231_AIPS1_BASE_ADDR + 0xA0000)
+#define MXC91231_KPP_BASE_ADDR		(MXC91231_AIPS1_BASE_ADDR + 0xA8000)
+#define MXC91231_IOMUX_AP_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0xAC000)
+#define MXC91231_CTI_AP_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0xB8000)
+
+/*
+ * AIPS 2
+ */
+#define MXC91231_AIPS2_BASE_ADDR	0x53F00000
+#define MXC91231_AIPS2_BASE_ADDR_VIRT	0xFC100000
+#define MXC91231_AIPS2_SIZE		SZ_1M
+
+#define MXC91231_GEMK_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0x8C000)
+#define MXC91231_GPT1_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0x90000)
+#define MXC91231_EPIT1_AP_BASE_ADDR	(MXC91231_AIPS2_BASE_ADDR + 0x94000)
+#define MXC91231_SCC_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0xAC000)
+#define MXC91231_RNGA_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0xB0000)
+#define MXC91231_IPU_CTRL_BASE_ADDR	(MXC91231_AIPS2_BASE_ADDR + 0xC0000)
+#define MXC91231_AUDMUX_BASE_ADDR	(MXC91231_AIPS2_BASE_ADDR + 0xC4000)
+#define MXC91231_EDIO_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0xC8000)
+#define MXC91231_GPIO1_AP_BASE_ADDR	(MXC91231_AIPS2_BASE_ADDR + 0xCC000)
+#define MXC91231_GPIO2_AP_BASE_ADDR	(MXC91231_AIPS2_BASE_ADDR + 0xD0000)
+#define MXC91231_SDMA_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0xD4000)
+#define MXC91231_RTC_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0xD8000)
+#define MXC91231_WDOG1_BASE_ADDR	(MXC91231_AIPS2_BASE_ADDR + 0xDC000)
+#define MXC91231_PWM_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0xE0000)
+#define MXC91231_GPIO3_AP_BASE_ADDR	(MXC91231_AIPS2_BASE_ADDR + 0xE4000)
+#define MXC91231_WDOG2_BASE_ADDR	(MXC91231_AIPS2_BASE_ADDR + 0xE8000)
+#define MXC91231_RTIC_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0xEC000)
+#define MXC91231_LPMC_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0xF0000)
+
+/*
+ * SPBA global module 0
+ */
+#define MXC91231_SPBA0_BASE_ADDR	0x50000000
+#define MXC91231_SPBA0_BASE_ADDR_VIRT	0xFC200000
+#define MXC91231_SPBA0_SIZE		SZ_1M
+
+#define MXC91231_MMC_SDHC1_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x04000)
+#define MXC91231_MMC_SDHC2_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x08000)
+#define MXC91231_UART3_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x0C000)
+#define MXC91231_CSPI2_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x10000)
+#define MXC91231_SSI2_BASE_ADDR		(MXC91231_SPBA0_BASE_ADDR + 0x14000)
+#define MXC91231_SIM_BASE_ADDR		(MXC91231_SPBA0_BASE_ADDR + 0x18000)
+#define MXC91231_IIM_BASE_ADDR		(MXC91231_SPBA0_BASE_ADDR + 0x1C000)
+#define MXC91231_CTI_SDMA_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x20000)
+#define MXC91231_USBOTG_CTRL_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x24000)
+#define MXC91231_USBOTG_DATA_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x28000)
+#define MXC91231_CSPI1_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x30000)
+#define MXC91231_SPBA_CTRL_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x3C000)
+#define MXC91231_IOMUX_COM_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x40000)
+#define MXC91231_CRM_COM_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x44000)
+#define MXC91231_CRM_AP_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x48000)
+#define MXC91231_PLL0_BASE_ADDR		(MXC91231_SPBA0_BASE_ADDR + 0x4C000)
+#define MXC91231_PLL1_BASE_ADDR		(MXC91231_SPBA0_BASE_ADDR + 0x50000)
+#define MXC91231_PLL2_BASE_ADDR		(MXC91231_SPBA0_BASE_ADDR + 0x54000)
+#define MXC91231_GPIO4_SH_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x58000)
+#define MXC91231_HAC_BASE_ADDR		(MXC91231_SPBA0_BASE_ADDR + 0x5C000)
+#define MXC91231_SAHARA_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x5C000)
+#define MXC91231_PLL3_BASE_ADDR		(MXC91231_SPBA0_BASE_ADDR + 0x60000)
+
+/*
+ * SPBA global module 1
+ */
+#define MXC91231_SPBA1_BASE_ADDR	0x52000000
+#define MXC91231_SPBA1_BASE_ADDR_VIRT	0xFC300000
+#define MXC91231_SPBA1_SIZE		SZ_1M
+
+#define MXC91231_MQSPI_BASE_ADDR	(MXC91231_SPBA1_BASE_ADDR + 0x34000)
+#define MXC91231_EL1T_BASE_ADDR		(MXC91231_SPBA1_BASE_ADDR + 0x38000)
+
+/*!
+ * Defines for SPBA modules
+ */
+#define MXC91231_SPBA_SDHC1		0x04
+#define MXC91231_SPBA_SDHC2		0x08
+#define MXC91231_SPBA_UART3		0x0C
+#define MXC91231_SPBA_CSPI2		0x10
+#define MXC91231_SPBA_SSI2		0x14
+#define MXC91231_SPBA_SIM		0x18
+#define MXC91231_SPBA_IIM		0x1C
+#define MXC91231_SPBA_CTI_SDMA		0x20
+#define MXC91231_SPBA_USBOTG_CTRL_REGS	0x24
+#define MXC91231_SPBA_USBOTG_DATA_REGS	0x28
+#define MXC91231_SPBA_CSPI1		0x30
+#define MXC91231_SPBA_MQSPI		0x34
+#define MXC91231_SPBA_EL1T		0x38
+#define MXC91231_SPBA_IOMUX		0x40
+#define MXC91231_SPBA_CRM_COM		0x44
+#define MXC91231_SPBA_CRM_AP		0x48
+#define MXC91231_SPBA_PLL0		0x4C
+#define MXC91231_SPBA_PLL1		0x50
+#define MXC91231_SPBA_PLL2		0x54
+#define MXC91231_SPBA_GPIO4		0x58
+#define MXC91231_SPBA_SAHARA		0x5C
+
+/*
+ * ROMP and AVIC
+ */
+#define MXC91231_ROMP_BASE_ADDR		0x60000000
+#define MXC91231_ROMP_BASE_ADDR_VIRT	0xFC400000
+#define MXC91231_ROMP_SIZE		SZ_64K
+
+#define MXC91231_AVIC_BASE_ADDR		0x68000000
+#define MXC91231_AVIC_BASE_ADDR_VIRT	0xFC410000
+#define MXC91231_AVIC_SIZE		SZ_64K
+
+/*
+ * NAND, SDRAM, WEIM, M3IF, EMI controllers
+ */
+#define MXC91231_X_MEMC_BASE_ADDR	0xB8000000
+#define MXC91231_X_MEMC_BASE_ADDR_VIRT	0xFC420000
+#define MXC91231_X_MEMC_SIZE		SZ_64K
+
+#define MXC91231_NFC_BASE_ADDR		(MXC91231_X_MEMC_BASE_ADDR + 0x0000)
+#define MXC91231_ESDCTL_BASE_ADDR	(MXC91231_X_MEMC_BASE_ADDR + 0x1000)
+#define MXC91231_WEIM_BASE_ADDR		(MXC91231_X_MEMC_BASE_ADDR + 0x2000)
+#define MXC91231_M3IF_BASE_ADDR		(MXC91231_X_MEMC_BASE_ADDR + 0x3000)
+#define MXC91231_EMI_CTL_BASE_ADDR	(MXC91231_X_MEMC_BASE_ADDR + 0x4000)
+
+/*
+ * Memory regions and CS
+ * CPLD is connected on CS4
+ * CS5 is TP1021 or it is not connected
+ * */
+#define MXC91231_FB_RAM_BASE_ADDR	0x78000000
+#define MXC91231_FB_RAM_SIZE		SZ_256K
+#define MXC91231_CSD0_BASE_ADDR		0x80000000
+#define MXC91231_CSD1_BASE_ADDR		0x90000000
+#define MXC91231_CS0_BASE_ADDR		0xA0000000
+#define MXC91231_CS1_BASE_ADDR		0xA8000000
+#define MXC91231_CS2_BASE_ADDR		0xB0000000
+#define MXC91231_CS3_BASE_ADDR		0xB2000000
+#define MXC91231_CS4_BASE_ADDR		0xB4000000
+#define MXC91231_CS5_BASE_ADDR		0xB6000000
+
+/* Is given address belongs to the specified memory region? */
+#define ADDRESS_IN_REGION(addr, start, size) \
+	(((addr) >= (start)) && ((addr) < (start)+(size)))
+
+/* Is given address belongs to the specified named `module'? */
+#define MXC91231_IS_MODULE(addr, module) \
+	ADDRESS_IN_REGION(addr, MXC91231_ ## module ## _BASE_ADDR, \
+	                        MXC91231_ ## module ## _SIZE)
+/*
+ * This macro defines the physical to virtual address mapping for all the
+ * peripheral modules. It is used by passing in the physical address as x
+ * and returning the virtual address. If the physical address is not mapped,
+ * it returns 0xDEADBEEF
+ */
+
+#define MXC91231_IO_ADDRESS(x) \
+	(void __iomem *) \
+	(MXC91231_IS_MODULE(x, L2CC) ? MXC91231_L2CC_IO_ADDRESS(x) : \
+	 MXC91231_IS_MODULE(x, AIPS1) ? MXC91231_AIPS1_IO_ADDRESS(x) : \
+	 MXC91231_IS_MODULE(x, AIPS2) ? MXC91231_AIPS2_IO_ADDRESS(x) : \
+	 MXC91231_IS_MODULE(x, SPBA0) ? MXC91231_SPBA0_IO_ADDRESS(x) : \
+	 MXC91231_IS_MODULE(x, SPBA1) ? MXC91231_SPBA1_IO_ADDRESS(x) : \
+	 MXC91231_IS_MODULE(x, ROMP) ? MXC91231_ROMP_IO_ADDRESS(x) : \
+	 MXC91231_IS_MODULE(x, AVIC) ? MXC91231_AVIC_IO_ADDRESS(x) : \
+	 MXC91231_IS_MODULE(x, X_MEMC) ? MXC91231_X_MEMC_IO_ADDRESS(x) : \
+	 0xDEADBEEF)
+
+
+/*
+ * define the address mapping macros: in physical address order
+ */
+#define MXC91231_L2CC_IO_ADDRESS(x)  \
+	(((x) - MXC91231_L2CC_BASE_ADDR) + MXC91231_L2CC_BASE_ADDR_VIRT)
+
+#define MXC91231_AIPS1_IO_ADDRESS(x)  \
+	(((x) - MXC91231_AIPS1_BASE_ADDR) + MXC91231_AIPS1_BASE_ADDR_VIRT)
+
+#define MXC91231_SPBA0_IO_ADDRESS(x)  \
+	(((x) - MXC91231_SPBA0_BASE_ADDR) + MXC91231_SPBA0_BASE_ADDR_VIRT)
+
+#define MXC91231_SPBA1_IO_ADDRESS(x)  \
+	(((x) - MXC91231_SPBA1_BASE_ADDR) + MXC91231_SPBA1_BASE_ADDR_VIRT)
+
+#define MXC91231_AIPS2_IO_ADDRESS(x)  \
+	(((x) - MXC91231_AIPS2_BASE_ADDR) + MXC91231_AIPS2_BASE_ADDR_VIRT)
+
+#define MXC91231_ROMP_IO_ADDRESS(x)  \
+	(((x) - MXC91231_ROMP_BASE_ADDR) + MXC91231_ROMP_BASE_ADDR_VIRT)
+
+#define MXC91231_AVIC_IO_ADDRESS(x)  \
+	(((x) - MXC91231_AVIC_BASE_ADDR) + MXC91231_AVIC_BASE_ADDR_VIRT)
+
+#define MXC91231_X_MEMC_IO_ADDRESS(x)  \
+	(((x) - MXC91231_X_MEMC_BASE_ADDR) + MXC91231_X_MEMC_BASE_ADDR_VIRT)
+
+/*
+ * Interrupt numbers
+ */
+#define MXC91231_INT_GPIO3		0
+#define MXC91231_INT_EL1T_CI		1
+#define MXC91231_INT_EL1T_RFCI		2
+#define MXC91231_INT_EL1T_RFI		3
+#define MXC91231_INT_EL1T_MCU		4
+#define MXC91231_INT_EL1T_IPI		5
+#define MXC91231_INT_MU_GEN		6
+#define MXC91231_INT_GPIO4		7
+#define MXC91231_INT_MMC_SDHC2		8
+#define MXC91231_INT_MMC_SDHC1		9
+#define MXC91231_INT_I2C		10
+#define MXC91231_INT_SSI2		11
+#define MXC91231_INT_SSI1		12
+#define MXC91231_INT_CSPI2		13
+#define MXC91231_INT_CSPI1		14
+#define MXC91231_INT_RTIC		15
+#define MXC91231_INT_SAHARA		15
+#define MXC91231_INT_HAC		15
+#define MXC91231_INT_UART3_RX		16
+#define MXC91231_INT_UART3_TX		17
+#define MXC91231_INT_UART3_MINT		18
+#define MXC91231_INT_ECT		19
+#define MXC91231_INT_SIM_IPB		20
+#define MXC91231_INT_SIM_DATA		21
+#define MXC91231_INT_RNGA		22
+#define MXC91231_INT_DSM_AP		23
+#define MXC91231_INT_KPP		24
+#define MXC91231_INT_RTC		25
+#define MXC91231_INT_PWM		26
+#define MXC91231_INT_GEMK_AP		27
+#define MXC91231_INT_EPIT		28
+#define MXC91231_INT_GPT		29
+#define MXC91231_INT_UART2_RX		30
+#define MXC91231_INT_UART2_TX		31
+#define MXC91231_INT_UART2_MINT		32
+#define MXC91231_INT_NANDFC		33
+#define MXC91231_INT_SDMA		34
+#define MXC91231_INT_USB_WAKEUP		35
+#define MXC91231_INT_USB_SOF		36
+#define MXC91231_INT_PMU_EVTMON		37
+#define MXC91231_INT_USB_FUNC		38
+#define MXC91231_INT_USB_DMA		39
+#define MXC91231_INT_USB_CTRL		40
+#define MXC91231_INT_IPU_ERR		41
+#define MXC91231_INT_IPU_SYN		42
+#define MXC91231_INT_UART1_RX		43
+#define MXC91231_INT_UART1_TX		44
+#define MXC91231_INT_UART1_MINT		45
+#define MXC91231_INT_IIM		46
+#define MXC91231_INT_MU_RX_OR		47
+#define MXC91231_INT_MU_TX_OR		48
+#define MXC91231_INT_SCC_SCM		49
+#define MXC91231_INT_SCC_SMN		50
+#define MXC91231_INT_GPIO2		51
+#define MXC91231_INT_GPIO1		52
+#define MXC91231_INT_MQSPI1		53
+#define MXC91231_INT_MQSPI2		54
+#define MXC91231_INT_WDOG2		55
+#define MXC91231_INT_EXT_INT7		56
+#define MXC91231_INT_EXT_INT6		57
+#define MXC91231_INT_EXT_INT5		58
+#define MXC91231_INT_EXT_INT4		59
+#define MXC91231_INT_EXT_INT3		60
+#define MXC91231_INT_EXT_INT2		61
+#define MXC91231_INT_EXT_INT1		62
+#define MXC91231_INT_EXT_INT0		63
+
+#define MXC91231_MAX_INT_LINES		63
+#define MXC91231_MAX_EXT_LINES		8
+
+#endif /* __MACH_MXC91231_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
index e56241af870..ef00199568d 100644
--- a/arch/arm/plat-mxc/include/mach/system.h
+++ b/arch/arm/plat-mxc/include/mach/system.h
@@ -21,8 +21,18 @@
 #ifndef __ASM_ARCH_MXC_SYSTEM_H__
 #define __ASM_ARCH_MXC_SYSTEM_H__
 
+#include <mach/hardware.h>
+#include <mach/common.h>
+
 static inline void arch_idle(void)
 {
+#ifdef CONFIG_ARCH_MXC91231
+	if (cpu_is_mxc91231()) {
+		/* Need this to set DSM low-power mode */
+		mxc91231_prepare_idle();
+	}
+#endif
+
 	cpu_do_idle();
 }
 
diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h
index 0707b7d5b5c..527a6c24788 100644
--- a/arch/arm/plat-mxc/include/mach/timex.h
+++ b/arch/arm/plat-mxc/include/mach/timex.h
@@ -28,6 +28,8 @@
 #define CLOCK_TICK_RATE		16625000
 #elif defined CONFIG_ARCH_MX25
 #define CLOCK_TICK_RATE		16000000
+#elif defined CONFIG_ARCH_MXC91231
+#define CLOCK_TICK_RATE		13000000
 #endif
 
 #endif				/* __ASM_ARCH_MXC_TIMEX_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index 1e24499f20b..082a3908256 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -66,6 +66,7 @@ static void putc(int ch)
 #define MX25_UART1_BASE_ADDR	0x43f90000
 #define MX2X_UART1_BASE_ADDR	0x1000a000
 #define MX3X_UART1_BASE_ADDR	0x43F90000
+#define MX3X_UART2_BASE_ADDR	0x43F94000
 
 static __inline__ void __arch_decomp_setup(unsigned long arch_id)
 {
@@ -95,6 +96,9 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
 	case MACH_TYPE_PCM043:
 		uart_base = MX3X_UART1_BASE_ADDR;
 		break;
+	case MACH_TYPE_MAGX_ZN5:
+		uart_base = MX3X_UART2_BASE_ADDR;
+		break;
 	default:
 		break;
 	}
diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c
index 15e30532f4a..97f42799fa5 100644
--- a/arch/arm/plat-mxc/system.c
+++ b/arch/arm/plat-mxc/system.c
@@ -27,6 +27,7 @@
 #include <linux/delay.h>
 
 #include <mach/hardware.h>
+#include <mach/common.h>
 #include <asm/proc-fns.h>
 #include <asm/system.h>
 
@@ -39,6 +40,12 @@ void arch_reset(char mode, const char *cmd)
 {
 	unsigned int wcr_enable;
 
+#ifdef CONFIG_ARCH_MXC91231
+	if (cpu_is_mxc91231()) {
+		mxc91231_arch_reset(mode, cmd);
+		return;
+	}
+#endif
 	if (cpu_is_mx1()) {
 		wcr_enable = (1 << 0);
 	} else {
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 59e33a3bf7f..844567ee35f 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -47,7 +47,7 @@
 #define MX2_TSTAT_CAPT		(1 << 1)
 #define MX2_TSTAT_COMP		(1 << 0)
 
-/* MX31, MX35, MX25 */
+/* MX31, MX35, MX25, MXC91231 */
 #define MX3_TCTL_WAITEN		(1 << 3)
 #define MX3_TCTL_CLK_IPG	(1 << 6)
 #define MX3_TCTL_FRR		(1 << 9)
-- 
cgit v1.2.3


From 94da274b4982f5b36b55bde0c76d3ef8233bceda Mon Sep 17 00:00:00 2001
From: Dmitriy Taychenachev <dimichxp@gmail.com>
Date: Fri, 31 Jul 2009 20:29:23 +0900
Subject: MXC: add iomux pins configuration support for MXC91231

Signed-off-by: Dmitriy Taychenachev <dimichxp@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mxc91231/Makefile                 |   2 +-
 arch/arm/mach-mxc91231/iomux.c                  | 177 +++++++++++++++
 arch/arm/mach-mxc91231/magx-zn5.c               |   4 +
 arch/arm/plat-mxc/include/mach/iomux-mxc91231.h | 287 ++++++++++++++++++++++++
 4 files changed, 469 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-mxc91231/iomux.c
 create mode 100644 arch/arm/plat-mxc/include/mach/iomux-mxc91231.h

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mxc91231/Makefile b/arch/arm/mach-mxc91231/Makefile
index eb70b669c55..011d5e19712 100644
--- a/arch/arm/mach-mxc91231/Makefile
+++ b/arch/arm/mach-mxc91231/Makefile
@@ -1,2 +1,2 @@
-obj-y	:= mm.o clock.o devices.o system.o
+obj-y	:= mm.o clock.o devices.o system.o iomux.o
 obj-$(CONFIG_MACH_MAGX_ZN5) += magx-zn5.o
diff --git a/arch/arm/mach-mxc91231/iomux.c b/arch/arm/mach-mxc91231/iomux.c
new file mode 100644
index 00000000000..405d9b19d89
--- /dev/null
+++ b/arch/arm/mach-mxc91231/iomux.c
@@ -0,0 +1,177 @@
+/*
+ * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Valentin Longchamp <valentin.longchamp@epfl.ch>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <mach/iomux-mxc91231.h>
+
+/*
+ * IOMUX register (base) addresses
+ */
+#define IOMUX_AP_BASE		MXC91231_IO_ADDRESS(MXC91231_IOMUX_AP_BASE_ADDR)
+#define IOMUX_COM_BASE		MXC91231_IO_ADDRESS(MXC91231_IOMUX_COM_BASE_ADDR)
+#define IOMUXSW_AP_MUX_CTL	(IOMUX_AP_BASE + 0x000)
+#define IOMUXSW_SP_MUX_CTL	(IOMUX_COM_BASE + 0x000)
+#define IOMUXSW_PAD_CTL		(IOMUX_COM_BASE + 0x200)
+
+#define IOMUXINT_OBS1		(IOMUX_AP_BASE + 0x600)
+#define IOMUXINT_OBS2		(IOMUX_AP_BASE + 0x004)
+
+static DEFINE_SPINLOCK(gpio_mux_lock);
+
+#define NB_PORTS			((PIN_MAX + 32) / 32)
+#define PIN_GLOBAL_NUM(pin) \
+	(((pin & MUX_SIDE_MASK) >> MUX_SIDE_SHIFT)*PIN_AP_MAX +	\
+	 ((pin & MUX_REG_MASK) >> MUX_REG_SHIFT)*4 +		\
+	 ((pin & MUX_FIELD_MASK) >> MUX_FIELD_SHIFT))
+
+unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG];
+/*
+ * set the mode for a IOMUX pin.
+ */
+int mxc_iomux_mode(const unsigned int pin_mode)
+{
+	u32 side, field, l, mode, ret = 0;
+	void __iomem *reg;
+
+	side = (pin_mode & MUX_SIDE_MASK) >> MUX_SIDE_SHIFT;
+	switch (side) {
+	case MUX_SIDE_AP:
+		reg = IOMUXSW_AP_MUX_CTL;
+		break;
+	case MUX_SIDE_SP:
+		reg = IOMUXSW_SP_MUX_CTL;
+		break;
+	default:
+		return -EINVAL;
+	}
+	reg += ((pin_mode & MUX_REG_MASK) >> MUX_REG_SHIFT) * 4;
+	field = (pin_mode & MUX_FIELD_MASK) >> MUX_FIELD_SHIFT;
+	mode = (pin_mode & MUX_MODE_MASK) >> MUX_MODE_SHIFT;
+
+	spin_lock(&gpio_mux_lock);
+
+	l = __raw_readl(reg);
+	l &= ~(0xff << (field * 8));
+	l |= mode << (field * 8);
+	__raw_writel(l, reg);
+
+	spin_unlock(&gpio_mux_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(mxc_iomux_mode);
+
+/*
+ * This function configures the pad value for a IOMUX pin.
+ */
+void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
+{
+	u32 padgrp, field, l;
+	void __iomem *reg;
+
+	padgrp = (pin & MUX_PADGRP_MASK) >> MUX_PADGRP_SHIFT;
+	reg = IOMUXSW_PAD_CTL + (pin + 2) / 3 * 4;
+	field = (pin + 2) % 3;
+
+	pr_debug("%s: reg offset = 0x%x, field = %d\n",
+			__func__, (pin + 2) / 3, field);
+
+	spin_lock(&gpio_mux_lock);
+
+	l = __raw_readl(reg);
+	l &= ~(0x1ff << (field * 10));
+	l |= config << (field * 10);
+	__raw_writel(l, reg);
+
+	spin_unlock(&gpio_mux_lock);
+}
+EXPORT_SYMBOL(mxc_iomux_set_pad);
+
+/*
+ * allocs a single pin:
+ * 	- reserves the pin so that it is not claimed by another driver
+ * 	- setups the iomux according to the configuration
+ */
+int mxc_iomux_alloc_pin(const unsigned int pin_mode, const char *label)
+{
+	unsigned pad = PIN_GLOBAL_NUM(pin_mode);
+	if (pad >= (PIN_MAX + 1)) {
+		printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n",
+			pad, label ? label : "?");
+		return -EINVAL;
+	}
+
+	if (test_and_set_bit(pad, mxc_pin_alloc_map)) {
+		printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n",
+			pad, label ? label : "?");
+		return -EBUSY;
+	}
+	mxc_iomux_mode(pin_mode);
+
+	return 0;
+}
+EXPORT_SYMBOL(mxc_iomux_alloc_pin);
+
+int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
+		const char *label)
+{
+	unsigned int *p = pin_list;
+	int i;
+	int ret = -EINVAL;
+
+	for (i = 0; i < count; i++) {
+		ret = mxc_iomux_alloc_pin(*p, label);
+		if (ret)
+			goto setup_error;
+		p++;
+	}
+	return 0;
+
+setup_error:
+	mxc_iomux_release_multiple_pins(pin_list, i);
+	return ret;
+}
+EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins);
+
+void mxc_iomux_release_pin(const unsigned int pin_mode)
+{
+	unsigned pad = PIN_GLOBAL_NUM(pin_mode);
+
+	if (pad < (PIN_MAX + 1))
+		clear_bit(pad, mxc_pin_alloc_map);
+}
+EXPORT_SYMBOL(mxc_iomux_release_pin);
+
+void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count)
+{
+	unsigned int *p = pin_list;
+	int i;
+
+	for (i = 0; i < count; i++) {
+		mxc_iomux_release_pin(*p);
+		p++;
+	}
+}
+EXPORT_SYMBOL(mxc_iomux_release_multiple_pins);
diff --git a/arch/arm/mach-mxc91231/magx-zn5.c b/arch/arm/mach-mxc91231/magx-zn5.c
index 8757573b0a8..7dbe4ca12ef 100644
--- a/arch/arm/mach-mxc91231/magx-zn5.c
+++ b/arch/arm/mach-mxc91231/magx-zn5.c
@@ -14,6 +14,7 @@
 
 #include <mach/common.h>
 #include <mach/hardware.h>
+#include <mach/iomux-mxc91231.h>
 #include <mach/mmc.h>
 #include <mach/imx-uart.h>
 
@@ -29,6 +30,9 @@ static void __init zn5_init(void)
 {
 	pm_power_off = mxc91231_power_off;
 
+	mxc_iomux_alloc_pin(MXC91231_PIN_SP_USB_DAT_VP__RXD2, "uart2-rx");
+	mxc_iomux_alloc_pin(MXC91231_PIN_SP_USB_SE0_VM__TXD2, "uart2-tx");
+
 	mxc_register_device(&mxc_uart_device1, &uart_pdata);
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
new file mode 100644
index 00000000000..9f13061192c
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
@@ -0,0 +1,287 @@
+/*
+ * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Dmitriy Taychenachev <dimichxp@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __MACH_IOMUX_MXC91231_H__
+#define __MACH_IOMUX_MXC91231_H__
+
+/*
+ * various IOMUX output functions
+ */
+
+#define	IOMUX_OCONFIG_GPIO (0 << 4)	/* used as GPIO */
+#define	IOMUX_OCONFIG_FUNC (1 << 4)	/* used as function */
+#define	IOMUX_OCONFIG_ALT1 (2 << 4)	/* used as alternate function 1 */
+#define	IOMUX_OCONFIG_ALT2 (3 << 4)	/* used as alternate function 2 */
+#define	IOMUX_OCONFIG_ALT3 (4 << 4)	/* used as alternate function 3 */
+#define	IOMUX_OCONFIG_ALT4 (5 << 4)	/* used as alternate function 4 */
+#define	IOMUX_OCONFIG_ALT5 (6 << 4)	/* used as alternate function 5 */
+#define	IOMUX_OCONFIG_ALT6 (7 << 4)	/* used as alternate function 6 */
+#define	IOMUX_ICONFIG_NONE  0	 	/* not configured for input */
+#define	IOMUX_ICONFIG_GPIO  1		/* used as GPIO */
+#define	IOMUX_ICONFIG_FUNC  2		/* used as function */
+#define	IOMUX_ICONFIG_ALT1  4		/* used as alternate function 1 */
+#define	IOMUX_ICONFIG_ALT2  8		/* used as alternate function 2 */
+
+#define IOMUX_CONFIG_GPIO (IOMUX_OCONFIG_GPIO | IOMUX_ICONFIG_GPIO)
+#define IOMUX_CONFIG_FUNC (IOMUX_OCONFIG_FUNC | IOMUX_ICONFIG_FUNC)
+#define IOMUX_CONFIG_ALT1 (IOMUX_OCONFIG_ALT1 | IOMUX_ICONFIG_ALT1)
+#define IOMUX_CONFIG_ALT2 (IOMUX_OCONFIG_ALT2 | IOMUX_ICONFIG_ALT2)
+
+/*
+ * setups a single pin:
+ * 	- reserves the pin so that it is not claimed by another driver
+ * 	- setups the iomux according to the configuration
+ * 	- if the pin is configured as a GPIO, we claim it throug kernel gpiolib
+ */
+int mxc_iomux_alloc_pin(const unsigned int pin_mode, const char *label);
+/*
+ * setups mutliple pins
+ * convenient way to call the above function with tables
+ */
+int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
+		const char *label);
+
+/*
+ * releases a single pin:
+ * 	- make it available for a future use by another driver
+ * 	- frees the GPIO if the pin was configured as GPIO
+ * 	- DOES NOT reconfigure the IOMUX in its reset state
+ */
+void mxc_iomux_release_pin(const unsigned int pin_mode);
+/*
+ * releases multiple pins
+ * convenvient way to call the above function with tables
+ */
+void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count);
+
+#define MUX_SIDE_AP		(0)
+#define MUX_SIDE_SP		(1)
+
+#define MUX_SIDE_SHIFT		(26)
+#define MUX_SIDE_MASK		(0x1 << MUX_SIDE_SHIFT)
+
+#define MUX_GPIO_PORT_SHIFT	(23)
+#define MUX_GPIO_PORT_MASK	(0x7 << MUX_GPIO_PORT_SHIFT)
+
+#define MUX_GPIO_PIN_SHIFT	(20)
+#define MUX_GPIO_PIN_MASK	(0x1f << MUX_GPIO_PIN_SHIFT)
+
+#define MUX_REG_SHIFT		(15)
+#define MUX_REG_MASK		(0x1f << MUX_REG_SHIFT)
+
+#define MUX_FIELD_SHIFT		(13)
+#define MUX_FIELD_MASK		(0x3 << MUX_FIELD_SHIFT)
+
+#define MUX_PADGRP_SHIFT	(8)
+#define MUX_PADGRP_MASK		(0x1f << MUX_PADGRP_SHIFT)
+
+#define MUX_PIN_MASK		(0xffffff << 8)
+
+#define GPIO_PORT_MAX		(3)
+
+#define IOMUX_PIN(side, gport, gpin, ctlreg, ctlfield, padgrp) \
+	(((side) << MUX_SIDE_SHIFT) |		  \
+	 (gport << MUX_GPIO_PORT_SHIFT) |		\
+	 ((gpin) << MUX_GPIO_PIN_SHIFT) |		\
+	 ((ctlreg) << MUX_REG_SHIFT) |		\
+	 ((ctlfield) << MUX_FIELD_SHIFT) |		\
+	 ((padgrp) << MUX_PADGRP_SHIFT))
+
+#define MUX_MODE_OUT_SHIFT	(4)
+#define MUX_MODE_IN_SHIFT	(0)
+#define MUX_MODE_SHIFT		(0)
+#define MUX_MODE_MASK		(0xff << MUX_MODE_SHIFT)
+
+#define IOMUX_MODE(pin, mode) \
+	(pin | (mode << MUX_MODE_SHIFT))
+
+enum iomux_pins {
+	/* AP Side pins */
+	MXC91231_PIN_AP_CLE		= IOMUX_PIN(0, 0,  0,  0, 0, 24),
+	MXC91231_PIN_AP_ALE		= IOMUX_PIN(0, 0,  1,  0, 1, 24),
+	MXC91231_PIN_AP_CE_B		= IOMUX_PIN(0, 0,  2,  0, 2, 24),
+	MXC91231_PIN_AP_RE_B		= IOMUX_PIN(0, 0,  3,  0, 3, 24),
+	MXC91231_PIN_AP_WE_B		= IOMUX_PIN(0, 0,  4,  1, 0, 24),
+	MXC91231_PIN_AP_WP_B		= IOMUX_PIN(0, 0,  5,  1, 1, 24),
+	MXC91231_PIN_AP_BSY_B		= IOMUX_PIN(0, 0,  6,  1, 2, 24),
+	MXC91231_PIN_AP_U1_TXD		= IOMUX_PIN(0, 0,  7,  1, 3, 28),
+	MXC91231_PIN_AP_U1_RXD		= IOMUX_PIN(0, 0,  8,  2, 0, 28),
+	MXC91231_PIN_AP_U1_RTS_B	= IOMUX_PIN(0, 0,  9,  2, 1, 28),
+	MXC91231_PIN_AP_U1_CTS_B	= IOMUX_PIN(0, 0, 10,  2, 2, 28),
+	MXC91231_PIN_AP_AD1_TXD		= IOMUX_PIN(0, 0, 11,  2, 3,  9),
+	MXC91231_PIN_AP_AD1_RXD		= IOMUX_PIN(0, 0, 12,  3, 0,  9),
+	MXC91231_PIN_AP_AD1_TXC		= IOMUX_PIN(0, 0, 13,  3, 1,  9),
+	MXC91231_PIN_AP_AD1_TXFS	= IOMUX_PIN(0, 0, 14,  3, 2,  9),
+	MXC91231_PIN_AP_AD2_TXD		= IOMUX_PIN(0, 0, 15,  3, 3,  9),
+	MXC91231_PIN_AP_AD2_RXD		= IOMUX_PIN(0, 0, 16,  4, 0,  9),
+	MXC91231_PIN_AP_AD2_TXC		= IOMUX_PIN(0, 0, 17,  4, 1,  9),
+	MXC91231_PIN_AP_AD2_TXFS	= IOMUX_PIN(0, 0, 18,  4, 2,  9),
+	MXC91231_PIN_AP_OWDAT		= IOMUX_PIN(0, 0, 19,  4, 3, 28),
+	MXC91231_PIN_AP_IPU_LD17	= IOMUX_PIN(0, 0, 20,  5, 0, 28),
+	MXC91231_PIN_AP_IPU_D3_VSYNC	= IOMUX_PIN(0, 0, 21,  5, 1, 28),
+	MXC91231_PIN_AP_IPU_D3_HSYNC	= IOMUX_PIN(0, 0, 22,  5, 2, 28),
+	MXC91231_PIN_AP_IPU_D3_CLK	= IOMUX_PIN(0, 0, 23,  5, 3, 28),
+	MXC91231_PIN_AP_IPU_D3_DRDY	= IOMUX_PIN(0, 0, 24,  6, 0, 28),
+	MXC91231_PIN_AP_IPU_D3_CONTR	= IOMUX_PIN(0, 0, 25,  6, 1, 28),
+	MXC91231_PIN_AP_IPU_D0_CS	= IOMUX_PIN(0, 0, 26,  6, 2, 28),
+	MXC91231_PIN_AP_IPU_LD16	= IOMUX_PIN(0, 0, 27,  6, 3, 28),
+	MXC91231_PIN_AP_IPU_D2_CS	= IOMUX_PIN(0, 0, 28,  7, 0, 28),
+	MXC91231_PIN_AP_IPU_PAR_RS	= IOMUX_PIN(0, 0, 29,  7, 1, 28),
+	MXC91231_PIN_AP_IPU_D3_PS	= IOMUX_PIN(0, 0, 30,  7, 2, 28),
+	MXC91231_PIN_AP_IPU_D3_CLS	= IOMUX_PIN(0, 0, 31,  7, 3, 28),
+	MXC91231_PIN_AP_IPU_RD		= IOMUX_PIN(0, 1,  0,  8, 0, 28),
+	MXC91231_PIN_AP_IPU_WR		= IOMUX_PIN(0, 1,  1,  8, 1, 28),
+	MXC91231_PIN_AP_IPU_LD0		= IOMUX_PIN(0, 7,  0,  8, 2, 28),
+	MXC91231_PIN_AP_IPU_LD1		= IOMUX_PIN(0, 7,  0,  8, 3, 28),
+	MXC91231_PIN_AP_IPU_LD2		= IOMUX_PIN(0, 7,  0,  9, 0, 28),
+	MXC91231_PIN_AP_IPU_LD3		= IOMUX_PIN(0, 1,  2,  9, 1, 28),
+	MXC91231_PIN_AP_IPU_LD4		= IOMUX_PIN(0, 1,  3,  9, 2, 28),
+	MXC91231_PIN_AP_IPU_LD5		= IOMUX_PIN(0, 1,  4,  9, 3, 28),
+	MXC91231_PIN_AP_IPU_LD6		= IOMUX_PIN(0, 1,  5, 10, 0, 28),
+	MXC91231_PIN_AP_IPU_LD7		= IOMUX_PIN(0, 1,  6, 10, 1, 28),
+	MXC91231_PIN_AP_IPU_LD8		= IOMUX_PIN(0, 1,  7, 10, 2, 28),
+	MXC91231_PIN_AP_IPU_LD9		= IOMUX_PIN(0, 1,  8, 10, 3, 28),
+	MXC91231_PIN_AP_IPU_LD10	= IOMUX_PIN(0, 1,  9, 11, 0, 28),
+	MXC91231_PIN_AP_IPU_LD11	= IOMUX_PIN(0, 1, 10, 11, 1, 28),
+	MXC91231_PIN_AP_IPU_LD12	= IOMUX_PIN(0, 1, 11, 11, 2, 28),
+	MXC91231_PIN_AP_IPU_LD13	= IOMUX_PIN(0, 1, 12, 11, 3, 28),
+	MXC91231_PIN_AP_IPU_LD14	= IOMUX_PIN(0, 1, 13, 12, 0, 28),
+	MXC91231_PIN_AP_IPU_LD15	= IOMUX_PIN(0, 1, 14, 12, 1, 28),
+	MXC91231_PIN_AP_KPROW4		= IOMUX_PIN(0, 7,  0, 12, 2, 10),
+	MXC91231_PIN_AP_KPROW5		= IOMUX_PIN(0, 1, 16, 12, 3, 10),
+	MXC91231_PIN_AP_GPIO_AP_B17	= IOMUX_PIN(0, 1, 17, 13, 0, 10),
+	MXC91231_PIN_AP_GPIO_AP_B18	= IOMUX_PIN(0, 1, 18, 13, 1, 10),
+	MXC91231_PIN_AP_KPCOL3		= IOMUX_PIN(0, 1, 19, 13, 2, 11),
+	MXC91231_PIN_AP_KPCOL4		= IOMUX_PIN(0, 1, 20, 13, 3, 11),
+	MXC91231_PIN_AP_KPCOL5		= IOMUX_PIN(0, 1, 21, 14, 0, 11),
+	MXC91231_PIN_AP_GPIO_AP_B22	= IOMUX_PIN(0, 1, 22, 14, 1, 11),
+	MXC91231_PIN_AP_GPIO_AP_B23	= IOMUX_PIN(0, 1, 23, 14, 2, 11),
+	MXC91231_PIN_AP_CSI_D0		= IOMUX_PIN(0, 1, 24, 14, 3, 21),
+	MXC91231_PIN_AP_CSI_D1		= IOMUX_PIN(0, 1, 25, 15, 0, 21),
+	MXC91231_PIN_AP_CSI_D2		= IOMUX_PIN(0, 1, 26, 15, 1, 21),
+	MXC91231_PIN_AP_CSI_D3		= IOMUX_PIN(0, 1, 27, 15, 2, 21),
+	MXC91231_PIN_AP_CSI_D4		= IOMUX_PIN(0, 1, 28, 15, 3, 21),
+	MXC91231_PIN_AP_CSI_D5		= IOMUX_PIN(0, 1, 29, 16, 0, 21),
+	MXC91231_PIN_AP_CSI_D6		= IOMUX_PIN(0, 1, 30, 16, 1, 21),
+	MXC91231_PIN_AP_CSI_D7		= IOMUX_PIN(0, 1, 31, 16, 2, 21),
+	MXC91231_PIN_AP_CSI_D8		= IOMUX_PIN(0, 2,  0, 16, 3, 21),
+	MXC91231_PIN_AP_CSI_D9		= IOMUX_PIN(0, 2,  1, 17, 0, 21),
+	MXC91231_PIN_AP_CSI_MCLK	= IOMUX_PIN(0, 2,  2, 17, 1, 21),
+	MXC91231_PIN_AP_CSI_VSYNC	= IOMUX_PIN(0, 2,  3, 17, 2, 21),
+	MXC91231_PIN_AP_CSI_HSYNC	= IOMUX_PIN(0, 2,  4, 17, 3, 21),
+	MXC91231_PIN_AP_CSI_PIXCLK	= IOMUX_PIN(0, 2,  5, 18, 0, 21),
+	MXC91231_PIN_AP_I2CLK		= IOMUX_PIN(0, 2,  6, 18, 1, 12),
+	MXC91231_PIN_AP_I2DAT		= IOMUX_PIN(0, 2,  7, 18, 2, 12),
+	MXC91231_PIN_AP_GPIO_AP_C8	= IOMUX_PIN(0, 2,  8, 18, 3,  9),
+	MXC91231_PIN_AP_GPIO_AP_C9	= IOMUX_PIN(0, 2,  9, 19, 0,  9),
+	MXC91231_PIN_AP_GPIO_AP_C10	= IOMUX_PIN(0, 2, 10, 19, 1,  9),
+	MXC91231_PIN_AP_GPIO_AP_C11	= IOMUX_PIN(0, 2, 11, 19, 2,  9),
+	MXC91231_PIN_AP_GPIO_AP_C12	= IOMUX_PIN(0, 2, 12, 19, 3,  9),
+	MXC91231_PIN_AP_GPIO_AP_C13	= IOMUX_PIN(0, 2, 13, 20, 0, 28),
+	MXC91231_PIN_AP_GPIO_AP_C14	= IOMUX_PIN(0, 2, 14, 20, 1, 28),
+	MXC91231_PIN_AP_GPIO_AP_C15	= IOMUX_PIN(0, 2, 15, 20, 2,  9),
+	MXC91231_PIN_AP_GPIO_AP_C16	= IOMUX_PIN(0, 2, 16, 20, 3,  9),
+	MXC91231_PIN_AP_GPIO_AP_C17	= IOMUX_PIN(0, 2, 17, 21, 0,  9),
+	MXC91231_PIN_AP_ED_INT0		= IOMUX_PIN(0, 2, 18, 21, 1, 22),
+	MXC91231_PIN_AP_ED_INT1		= IOMUX_PIN(0, 2, 19, 21, 2, 22),
+	MXC91231_PIN_AP_ED_INT2		= IOMUX_PIN(0, 2, 20, 21, 3, 22),
+	MXC91231_PIN_AP_ED_INT3		= IOMUX_PIN(0, 2, 21, 22, 0, 22),
+	MXC91231_PIN_AP_ED_INT4		= IOMUX_PIN(0, 2, 22, 22, 1, 23),
+	MXC91231_PIN_AP_ED_INT5		= IOMUX_PIN(0, 2, 23, 22, 2, 23),
+	MXC91231_PIN_AP_ED_INT6		= IOMUX_PIN(0, 2, 24, 22, 3, 23),
+	MXC91231_PIN_AP_ED_INT7		= IOMUX_PIN(0, 2, 25, 23, 0, 23),
+	MXC91231_PIN_AP_U2_DSR_B	= IOMUX_PIN(0, 2, 26, 23, 1, 28),
+	MXC91231_PIN_AP_U2_RI_B		= IOMUX_PIN(0, 2, 27, 23, 2, 28),
+	MXC91231_PIN_AP_U2_CTS_B	= IOMUX_PIN(0, 2, 28, 23, 3, 28),
+	MXC91231_PIN_AP_U2_DTR_B	= IOMUX_PIN(0, 2, 29, 24, 0, 28),
+	MXC91231_PIN_AP_KPROW0		= IOMUX_PIN(0, 7,  0, 24, 1, 10),
+	MXC91231_PIN_AP_KPROW1		= IOMUX_PIN(0, 1, 15, 24, 2, 10),
+	MXC91231_PIN_AP_KPROW2		= IOMUX_PIN(0, 7,  0, 24, 3, 10),
+	MXC91231_PIN_AP_KPROW3		= IOMUX_PIN(0, 7,  0, 25, 0, 10),
+	MXC91231_PIN_AP_KPCOL0		= IOMUX_PIN(0, 7,  0, 25, 1, 11),
+	MXC91231_PIN_AP_KPCOL1		= IOMUX_PIN(0, 7,  0, 25, 2, 11),
+	MXC91231_PIN_AP_KPCOL2		= IOMUX_PIN(0, 7,  0, 25, 3, 11),
+
+	/* Shared pins */
+	MXC91231_PIN_SP_U3_TXD		= IOMUX_PIN(1, 3,  0,  0, 0, 28),
+	MXC91231_PIN_SP_U3_RXD		= IOMUX_PIN(1, 3,  1,  0, 1, 28),
+	MXC91231_PIN_SP_U3_RTS_B	= IOMUX_PIN(1, 3,  2,  0, 2, 28),
+	MXC91231_PIN_SP_U3_CTS_B	= IOMUX_PIN(1, 3,  3,  0, 3, 28),
+	MXC91231_PIN_SP_USB_TXOE_B	= IOMUX_PIN(1, 3,  4,  1, 0, 28),
+	MXC91231_PIN_SP_USB_DAT_VP	= IOMUX_PIN(1, 3,  5,  1, 1, 28),
+	MXC91231_PIN_SP_USB_SE0_VM	= IOMUX_PIN(1, 3,  6,  1, 2, 28),
+	MXC91231_PIN_SP_USB_RXD		= IOMUX_PIN(1, 3,  7,  1, 3, 28),
+	MXC91231_PIN_SP_UH2_TXOE_B	= IOMUX_PIN(1, 3,  8,  2, 0, 28),
+	MXC91231_PIN_SP_UH2_SPEED	= IOMUX_PIN(1, 3,  9,  2, 1, 28),
+	MXC91231_PIN_SP_UH2_SUSPEN	= IOMUX_PIN(1, 3, 10,  2, 2, 28),
+	MXC91231_PIN_SP_UH2_TXDP	= IOMUX_PIN(1, 3, 11,  2, 3, 28),
+	MXC91231_PIN_SP_UH2_RXDP	= IOMUX_PIN(1, 3, 12,  3, 0, 28),
+	MXC91231_PIN_SP_UH2_RXDM	= IOMUX_PIN(1, 3, 13,  3, 1, 28),
+	MXC91231_PIN_SP_UH2_OVR		= IOMUX_PIN(1, 3, 14,  3, 2, 28),
+	MXC91231_PIN_SP_UH2_PWR		= IOMUX_PIN(1, 3, 15,  3, 3, 28),
+	MXC91231_PIN_SP_SD1_DAT0	= IOMUX_PIN(1, 3, 16,  4, 0, 25),
+	MXC91231_PIN_SP_SD1_DAT1	= IOMUX_PIN(1, 3, 17,  4, 1, 25),
+	MXC91231_PIN_SP_SD1_DAT2	= IOMUX_PIN(1, 3, 18,  4, 2, 25),
+	MXC91231_PIN_SP_SD1_DAT3	= IOMUX_PIN(1, 3, 19,  4, 3, 25),
+	MXC91231_PIN_SP_SD1_CMD		= IOMUX_PIN(1, 3, 20,  5, 0, 25),
+	MXC91231_PIN_SP_SD1_CLK		= IOMUX_PIN(1, 3, 21,  5, 1, 25),
+	MXC91231_PIN_SP_SD2_DAT0	= IOMUX_PIN(1, 3, 22,  5, 2, 26),
+	MXC91231_PIN_SP_SD2_DAT1	= IOMUX_PIN(1, 3, 23,  5, 3, 26),
+	MXC91231_PIN_SP_SD2_DAT2	= IOMUX_PIN(1, 3, 24,  6, 0, 26),
+	MXC91231_PIN_SP_SD2_DAT3	= IOMUX_PIN(1, 3, 25,  6, 1, 26),
+	MXC91231_PIN_SP_GPIO_SP_A26	= IOMUX_PIN(1, 3, 26,  6, 2, 28),
+	MXC91231_PIN_SP_SPI1_CLK	= IOMUX_PIN(1, 3, 27,  6, 3, 13),
+	MXC91231_PIN_SP_SPI1_MOSI	= IOMUX_PIN(1, 3, 28,  7, 0, 13),
+	MXC91231_PIN_SP_SPI1_MISO	= IOMUX_PIN(1, 3, 29,  7, 1, 13),
+	MXC91231_PIN_SP_SPI1_SS0	= IOMUX_PIN(1, 3, 30,  7, 2, 13),
+	MXC91231_PIN_SP_SPI1_SS1	= IOMUX_PIN(1, 3, 31,  7, 3, 13),
+	MXC91231_PIN_SP_SD2_CMD		= IOMUX_PIN(1, 7,  0,  8, 0, 26),
+	MXC91231_PIN_SP_SD2_CLK		= IOMUX_PIN(1, 7,  0,  8, 1, 26),
+	MXC91231_PIN_SP_SIM1_RST_B	= IOMUX_PIN(1, 2, 30,  8, 2, 28),
+	MXC91231_PIN_SP_SIM1_SVEN	= IOMUX_PIN(1, 7,  0,  8, 3, 28),
+	MXC91231_PIN_SP_SIM1_CLK	= IOMUX_PIN(1, 7,  0,  9, 0, 28),
+	MXC91231_PIN_SP_SIM1_TRXD	= IOMUX_PIN(1, 7,  0,  9, 1, 28),
+	MXC91231_PIN_SP_SIM1_PD		= IOMUX_PIN(1, 2, 31,  9, 2, 28),
+	MXC91231_PIN_SP_UH2_TXDM	= IOMUX_PIN(1, 7,  0,  9, 3, 28),
+	MXC91231_PIN_SP_UH2_RXD		= IOMUX_PIN(1, 7,  0, 10, 0, 28),
+};
+
+#define PIN_AP_MAX	(104)
+#define PIN_SP_MAX	(41)
+
+#define PIN_MAX		(PIN_AP_MAX + PIN_SP_MAX)
+
+/*
+ * Convenience values for use with mxc_iomux_mode()
+ *
+ * Format here is MXC91231_PIN_(pin name)__(function)
+ */
+
+#define MXC91231_PIN_SP_USB_DAT_VP__USB_DAT_VP \
+	IOMUX_MODE(MXC91231_PIN_SP_USB_DAT_VP, IOMUX_CONFIG_FUNC)
+#define MXC91231_PIN_SP_USB_SE0_VM__USB_SE0_VM \
+	IOMUX_MODE(MXC91231_PIN_SP_USB_SE0_VM, IOMUX_CONFIG_FUNC)
+#define MXC91231_PIN_SP_USB_DAT_VP__RXD2 \
+	IOMUX_MODE(MXC91231_PIN_SP_USB_DAT_VP, IOMUX_CONFIG_ALT1)
+#define MXC91231_PIN_SP_USB_SE0_VM__TXD2 \
+	IOMUX_MODE(MXC91231_PIN_SP_USB_SE0_VM, IOMUX_CONFIG_ALT1)
+
+
+#endif /* __MACH_IOMUX_MXC91231_H__ */
-- 
cgit v1.2.3


From 89829d5fe31dc42825f2560c3c2c641709ed594e Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Mon, 10 Aug 2009 18:33:10 +0200
Subject: mx31: added one more pin definition

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/iomux-mx3.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index a3b206ce78b..67452732794 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -682,6 +682,7 @@ enum iomux_pins {
 #define MX31_PIN_GPIO3_0__GPIO3_0	IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_GPIO3_1__GPIO3_1	IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_TXD2__GPIO1_28		IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_GPIO1_0__GPIO1_0	IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO)
 
 /*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
  * cspi1_ss1*/
-- 
cgit v1.2.3


From b23f1534bb0e0dc97e46fc52bf9bde0c2226763c Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Mon, 10 Aug 2009 18:33:11 +0200
Subject: mx31moboard: added usb xcvr reset for mx31moboard

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/mx31moboard-devboard.c | 30 ++++++++++++++++--------------
 arch/arm/mach-mx3/mx31moboard-marxbot.c  | 28 +++++++++++++++-------------
 arch/arm/mach-mx3/mx31moboard.c          | 18 ++++++++++++++++++
 3 files changed, 49 insertions(+), 27 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index 4704405165a..2f2f142f075 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -116,23 +116,25 @@ static struct fsl_usb2_platform_data usb_pdata = {
 	.phy_mode	= FSL_USB2_PHY_ULPI,
 };
 
-#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST)
-#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+#define OTG_EN_B 	IOMUX_TO_GPIO(MX31_PIN_USB_OC)
 
 static void devboard_usbotg_init(void)
 {
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
 
 	gpio_request(OTG_EN_B, "usb-udc-en");
 	gpio_direction_output(OTG_EN_B, 0);
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 641c3d6153a..b817a4a5bcb 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -120,23 +120,25 @@ static struct fsl_usb2_platform_data usb_pdata = {
 	.phy_mode	= FSL_USB2_PHY_ULPI,
 };
 
-#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST)
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
 #define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
 
 static void marxbot_usbotg_init(void)
 {
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
 
 	gpio_request(OTG_EN_B, "usb-udc-en");
 	gpio_direction_output(OTG_EN_B, 0);
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index b86b8a757c9..53ce60bdc82 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -16,6 +16,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
@@ -56,6 +57,8 @@ static unsigned int moboard_pins[] = {
 	MX31_PIN_SD1_DATA1__SD1_DATA1, MX31_PIN_SD1_DATA0__SD1_DATA0,
 	MX31_PIN_SD1_CLK__SD1_CLK, MX31_PIN_SD1_CMD__SD1_CMD,
 	MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27,
+	/* USB reset */
+	MX31_PIN_GPIO1_0__GPIO1_0,
 };
 
 static struct physmap_flash_data mx31moboard_flash_data = {
@@ -143,6 +146,19 @@ static struct imxmmc_platform_data sdhc1_pdata = {
 	.exit	= moboard_sdhc1_exit,
 };
 
+/*
+ * this pin is dedicated for all mx31moboard systems, so we do it here
+ */
+#define USB_RESET_B	IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)
+
+static void usb_xcvr_reset(void)
+{
+	gpio_request(USB_RESET_B, "usb-reset");
+	gpio_direction_output(USB_RESET_B, 0);
+	mdelay(1);
+	gpio_set_value(USB_RESET_B, 1);
+}
+
 static struct platform_device *devices[] __initdata = {
 	&mx31moboard_flash,
 };
@@ -168,6 +184,8 @@ static void __init mxc_board_init(void)
 
 	mxc_register_device(&mxcsdhc_device0, &sdhc1_pdata);
 
+	usb_xcvr_reset();
+
 	switch (mx31moboard_baseboard) {
 	case MX31NOBOARD:
 		break;
-- 
cgit v1.2.3


From 88b05647171460b1d479371690876f8ac5957d42 Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Mon, 10 Aug 2009 18:33:12 +0200
Subject: mx31moboard: move usb otg support back to moboard common file

since all boards finally have this device

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/mx31moboard-devboard.c | 45 --------------------------------
 arch/arm/mach-mx3/mx31moboard-marxbot.c  | 45 --------------------------------
 arch/arm/mach-mx3/mx31moboard.c          | 45 ++++++++++++++++++++++++++++++++
 3 files changed, 45 insertions(+), 90 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index 2f2f142f075..b3e8f251ac7 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -16,7 +16,6 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/fsl_devices.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
@@ -40,18 +39,6 @@ static unsigned int devboard_pins[] = {
 	MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
 	MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
 	MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
-	/* USB OTG */
-	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
-	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
-	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
-	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
-	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
-	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
-	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
-	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
-	MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
-	MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
-	MX31_PIN_USB_OC__GPIO1_30,
 };
 
 static struct imxuart_platform_data uart_pdata = {
@@ -111,35 +98,6 @@ static struct imxmmc_platform_data sdhc2_pdata = {
 	.exit	= devboard_sdhc2_exit,
 };
 
-static struct fsl_usb2_platform_data usb_pdata = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_ULPI,
-};
-
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
-			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-#define OTG_EN_B 	IOMUX_TO_GPIO(MX31_PIN_USB_OC)
-
-static void devboard_usbotg_init(void)
-{
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
-
-	gpio_request(OTG_EN_B, "usb-udc-en");
-	gpio_direction_output(OTG_EN_B, 0);
-}
-
 /*
  * system init for baseboard usage. Will be called by mx31moboard init.
  */
@@ -153,7 +111,4 @@ void __init mx31moboard_devboard_init(void)
 	mxc_register_device(&mxc_uart_device1, &uart_pdata);
 
 	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
-
-	devboard_usbotg_init();
-	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
 }
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index b817a4a5bcb..53ce7ff0637 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -16,7 +16,6 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/fsl_devices.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
@@ -48,18 +47,6 @@ static unsigned int marxbot_pins[] = {
 	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
 	MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
 	MX31_PIN_TXD2__GPIO1_28,
-	/* USB OTG */
-	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
-	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
-	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
-	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
-	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
-	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
-	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
-	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
-	MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
-	MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
-	MX31_PIN_USB_OC__GPIO1_30,
 };
 
 #define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
@@ -115,35 +102,6 @@ static struct imxmmc_platform_data sdhc2_pdata = {
 	.exit	= marxbot_sdhc2_exit,
 };
 
-static struct fsl_usb2_platform_data usb_pdata = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_ULPI,
-};
-
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
-			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
-
-static void marxbot_usbotg_init(void)
-{
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
-
-	gpio_request(OTG_EN_B, "usb-udc-en");
-	gpio_direction_output(OTG_EN_B, 0);
-}
-
 /*
  * system init for baseboard usage. Will be called by mx31moboard init.
  */
@@ -155,7 +113,4 @@ void __init mx31moboard_marxbot_init(void)
 		"marxbot");
 
 	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
-
-	marxbot_usbotg_init();
-	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
 }
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index 53ce60bdc82..2852bd58eda 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -17,6 +17,7 @@
  */
 
 #include <linux/delay.h>
+#include <linux/fsl_devices.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
@@ -59,6 +60,18 @@ static unsigned int moboard_pins[] = {
 	MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27,
 	/* USB reset */
 	MX31_PIN_GPIO1_0__GPIO1_0,
+	/* USB OTG */
+	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+	MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+	MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
+	MX31_PIN_USB_OC__GPIO1_30,
 };
 
 static struct physmap_flash_data mx31moboard_flash_data = {
@@ -159,6 +172,35 @@ static void usb_xcvr_reset(void)
 	gpio_set_value(USB_RESET_B, 1);
 }
 
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
+
+static void moboard_usbotg_init(void)
+{
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
+
+	gpio_request(OTG_EN_B, "usb-udc-en");
+	gpio_direction_output(OTG_EN_B, 0);
+}
+
+static struct fsl_usb2_platform_data usb_pdata = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_ULPI,
+};
+
 static struct platform_device *devices[] __initdata = {
 	&mx31moboard_flash,
 };
@@ -186,6 +228,9 @@ static void __init mxc_board_init(void)
 
 	usb_xcvr_reset();
 
+	moboard_usbotg_init();
+	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+
 	switch (mx31moboard_baseboard) {
 	case MX31NOBOARD:
 		break;
-- 
cgit v1.2.3


From f420db843b7756e5d0d052b00472c94154f50c93 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 19 Dec 2008 14:32:14 +0100
Subject: MX2: Add SPI devices/resources

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/devices.c | 68 +++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-mx2/devices.h |  4 +++
 2 files changed, 72 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index 4ecf0977beb..62810cbe4e3 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -39,6 +39,74 @@
 
 #include "devices.h"
 
+/*
+ * SPI master controller
+ *
+ * - i.MX1: 2 channel (slighly different register setting)
+ * - i.MX21: 2 channel
+ * - i.MX27: 3 channel
+ */
+static struct resource mxc_spi_resources0[] = {
+	{
+	       .start = CSPI1_BASE_ADDR,
+	       .end = CSPI1_BASE_ADDR + SZ_4K - 1,
+	       .flags = IORESOURCE_MEM,
+	}, {
+	       .start = MXC_INT_CSPI1,
+	       .end = MXC_INT_CSPI1,
+	       .flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource mxc_spi_resources1[] = {
+	{
+		.start = CSPI2_BASE_ADDR,
+		.end = CSPI2_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_CSPI2,
+		.end = MXC_INT_CSPI2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+#ifdef CONFIG_MACH_MX27
+static struct resource mxc_spi_resources2[] = {
+	{
+		.start = CSPI3_BASE_ADDR,
+		.end = CSPI3_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_CSPI3,
+		.end = MXC_INT_CSPI3,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+#endif
+
+struct platform_device mxc_spi_device0 = {
+	.name = "spi_imx",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_spi_resources0),
+	.resource = mxc_spi_resources0,
+};
+
+struct platform_device mxc_spi_device1 = {
+	.name = "spi_imx",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(mxc_spi_resources1),
+	.resource = mxc_spi_resources1,
+};
+
+#ifdef CONFIG_MACH_MX27
+struct platform_device mxc_spi_device2 = {
+	.name = "spi_imx",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(mxc_spi_resources2),
+	.resource = mxc_spi_resources2,
+};
+#endif
+
 /*
  * General Purpose Timer
  * - i.MX21: 3 timers
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h
index 6e91b4e3509..d315406d672 100644
--- a/arch/arm/mach-mx2/devices.h
+++ b/arch/arm/mach-mx2/devices.h
@@ -23,3 +23,7 @@ extern struct platform_device mxc_otg_udc_device;
 extern struct platform_device mxc_otg_host;
 extern struct platform_device mxc_usbh1;
 extern struct platform_device mxc_usbh2;
+extern struct platform_device mxc_spi_device0;
+extern struct platform_device mxc_spi_device1;
+extern struct platform_device mxc_spi_device2;
+
-- 
cgit v1.2.3


From d37ba97d49703be4e71f786cffcee4dfe73fa93c Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 19 Dec 2008 14:32:15 +0100
Subject: MX31: add spi controller devices/resources

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/devices.c | 61 +++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-mx3/devices.h |  3 +++
 2 files changed, 64 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index 4e728a29196..cde1b079242 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -455,6 +455,67 @@ struct platform_device mxc_usbh2 = {
 	.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
 };
 
+/*
+ * SPI master controller
+ * 3 channels
+ */
+static struct resource imx_spi_0_resources[] = {
+	{
+	       .start = CSPI1_BASE_ADDR,
+	       .end = CSPI1_BASE_ADDR + SZ_4K - 1,
+	       .flags = IORESOURCE_MEM,
+	}, {
+	       .start = MXC_INT_CSPI1,
+	       .end = MXC_INT_CSPI1,
+	       .flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource imx_spi_1_resources[] = {
+	{
+		.start = CSPI2_BASE_ADDR,
+		.end = CSPI2_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_CSPI2,
+		.end = MXC_INT_CSPI2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource imx_spi_2_resources[] = {
+	{
+		.start = CSPI3_BASE_ADDR,
+		.end = CSPI3_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_CSPI3,
+		.end = MXC_INT_CSPI3,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_spi_device0 = {
+	.name = "spi_imx",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(imx_spi_0_resources),
+	.resource = imx_spi_0_resources,
+};
+
+struct platform_device imx_spi_device1 = {
+	.name = "spi_imx",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(imx_spi_1_resources),
+	.resource = imx_spi_1_resources,
+};
+
+struct platform_device imx_spi_device2 = {
+	.name = "spi_imx",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(imx_spi_2_resources),
+	.resource = imx_spi_2_resources,
+};
+
 #ifdef CONFIG_ARCH_MX35
 static struct resource mxc_fec_resources[] = {
 	{
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index 81614319755..79f2be45d13 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -20,4 +20,7 @@ extern struct platform_device mxc_otg_host;
 extern struct platform_device mxc_usbh1;
 extern struct platform_device mxc_usbh2;
 extern struct platform_device mxc_rnga_device;
+extern struct platform_device imx_spi_device0;
+extern struct platform_device imx_spi_device1;
+extern struct platform_device imx_spi_device2;
 
-- 
cgit v1.2.3


From 547270a3b9f2deb9590b65e8fc351e5399ddf15d Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue, 17 Mar 2009 15:43:54 +0100
Subject: i.MX35 clock support: Add USB clocks

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/clock-imx35.c | 20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index 1dbcdc07257..fe5c4217322 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -273,6 +273,19 @@ static unsigned long get_rate_csi(struct clk *clk)
 	return rate / get_3_3_div((pdr2 >> 16) & 0x3f);
 }
 
+static unsigned long get_rate_otg(struct clk *clk)
+{
+	unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4);
+	unsigned long rate;
+
+	if (pdr4 & (1 << 9))
+		rate = get_rate_arm();
+	else
+		rate = get_rate_ppll();
+
+	return rate / get_3_3_div((pdr4 >> 22) & 0x3f);
+}
+
 static unsigned long get_rate_ipg_per(struct clk *clk)
 {
 	unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
@@ -365,7 +378,7 @@ DEFINE_CLOCK(ssi2_clk,   1, CCM_CGR2, 14, get_rate_ssi, NULL);
 DEFINE_CLOCK(uart1_clk,  0, CCM_CGR2, 16, get_rate_uart, NULL);
 DEFINE_CLOCK(uart2_clk,  1, CCM_CGR2, 18, get_rate_uart, NULL);
 DEFINE_CLOCK(uart3_clk,  2, CCM_CGR2, 20, get_rate_uart, NULL);
-DEFINE_CLOCK(usbotg_clk, 0, CCM_CGR2, 22, NULL, NULL);
+DEFINE_CLOCK(usbotg_clk, 0, CCM_CGR2, 22, get_rate_otg, NULL);
 DEFINE_CLOCK(wdog_clk,   0, CCM_CGR2, 24, NULL, NULL);
 DEFINE_CLOCK(max_clk,    0, CCM_CGR2, 26, NULL, NULL);
 DEFINE_CLOCK(admux_clk,  0, CCM_CGR2, 30, NULL, NULL);
@@ -426,7 +439,10 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
 	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
 	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
-	_REGISTER_CLOCK(NULL, "usbotg", usbotg_clk)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb", usbotg_clk)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
 	_REGISTER_CLOCK("mxc_wdt.0", NULL, wdog_clk)
 	_REGISTER_CLOCK(NULL, "max", max_clk)
 	_REGISTER_CLOCK(NULL, "admux", admux_clk)
-- 
cgit v1.2.3


From 337316986f0531e1681c409de9b73af0bc6dc7bb Mon Sep 17 00:00:00 2001
From: Luotao Fu <l.fu@pengutronix.de>
Date: Thu, 6 Aug 2009 11:19:39 +0200
Subject: mx27: add support for phytec pca100 (phyCARD-s) board

Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/Kconfig  |   7 ++
 arch/arm/mach-mx2/Makefile |   2 +
 arch/arm/mach-mx2/pca100.c | 244 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 253 insertions(+)
 create mode 100644 arch/arm/mach-mx2/pca100.c

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
index 0c28a37bc14..c8a2eac4d13 100644
--- a/arch/arm/mach-mx2/Kconfig
+++ b/arch/arm/mach-mx2/Kconfig
@@ -95,4 +95,11 @@ config MACH_MX27LITE
 	  Include support for MX27 LITEKIT platform. This includes specific
 	  configurations for the board and its peripherals.
 
+config MACH_PCA100
+	bool "Phytec phyCARD-s (pca100)"
+	depends on MACH_MX27
+	help
+	  Include support for phyCARD-s (aka pca100) platform. This
+	  includes specific configurations for the module and its peripherals.
+
 endif
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
index 8b6846c4226..19560f04563 100644
--- a/arch/arm/mach-mx2/Makefile
+++ b/arch/arm/mach-mx2/Makefile
@@ -19,3 +19,5 @@ obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o
 obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o
 obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
+obj-$(CONFIG_MACH_PCA100) += pca100.o
+
diff --git a/arch/arm/mach-mx2/pca100.c b/arch/arm/mach-mx2/pca100.c
new file mode 100644
index 00000000000..fe5b165b88c
--- /dev/null
+++ b/arch/arm/mach-mx2/pca100.c
@@ -0,0 +1,244 @@
+/*
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2009 Sascha Hauer (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/dma-mapping.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux.h>
+#include <mach/i2c.h>
+#include <asm/mach/time.h>
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+#include <mach/spi.h>
+#endif
+#include <mach/imx-uart.h>
+#include <mach/mxc_nand.h>
+#include <mach/irqs.h>
+#include <mach/mmc.h>
+
+#include "devices.h"
+
+static int pca100_pins[] = {
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* SDHC */
+	PB4_PF_SD2_D0,
+	PB5_PF_SD2_D1,
+	PB6_PF_SD2_D2,
+	PB7_PF_SD2_D3,
+	PB8_PF_SD2_CMD,
+	PB9_PF_SD2_CLK,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* SSI1 */
+	PC20_PF_SSI1_FS,
+	PC21_PF_SSI1_RXD,
+	PC22_PF_SSI1_TXD,
+	PC23_PF_SSI1_CLK,
+	/* onboard I2C */
+	PC5_PF_I2C2_SDA,
+	PC6_PF_I2C2_SCL,
+	/* external I2C */
+	PD17_PF_I2C_DATA,
+	PD18_PF_I2C_CLK,
+	/* SPI1 */
+	PD25_PF_CSPI1_RDY,
+	PD29_PF_CSPI1_SCLK,
+	PD30_PF_CSPI1_MISO,
+	PD31_PF_CSPI1_MOSI,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct mxc_nand_platform_data pca100_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&mxc_w1_master_device,
+	&mxc_fec_device,
+};
+
+static struct imxi2c_platform_data pca100_i2c_1_data = {
+	.bitrate = 100000,
+};
+
+static struct at24_platform_data board_eeprom = {
+	.byte_len = 4096,
+	.page_size = 32,
+	.flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info pca100_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
+		.platform_data = &board_eeprom,
+	}, {
+		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+		.type = "pcf8563"
+	}, {
+		I2C_BOARD_INFO("lm75", 0x4a),
+		.type = "lm75"
+	}
+};
+
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+static struct spi_eeprom at25320 = {
+	.name		= "at25320an",
+	.byte_len	= 4096,
+	.page_size	= 32,
+	.flags		= EE_ADDR2,
+};
+
+static struct spi_board_info pca100_spi_board_info[] __initdata = {
+	{
+		.modalias = "at25",
+		.max_speed_hz = 30000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.platform_data = &at25320,
+	},
+};
+
+static int pca100_spi_cs[] = {GPIO_PORTD + 28, GPIO_PORTD + 27};
+
+static struct spi_imx_master pca100_spi_0_data = {
+	.chipselect	= pca100_spi_cs,
+	.num_chipselect = ARRAY_SIZE(pca100_spi_cs),
+};
+#endif
+
+static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+		void *data)
+{
+	int ret;
+
+	ret = request_irq(IRQ_GPIOC(29), detect_irq,
+			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			  "imx-mmc-detect", data);
+	if (ret)
+		printk(KERN_ERR
+			"pca100: Failed to reuest irq for sd/mmc detection\n");
+
+	return ret;
+}
+
+static void pca100_sdhc2_exit(struct device *dev, void *data)
+{
+	free_irq(IRQ_GPIOC(29), data);
+}
+
+static struct imxmmc_platform_data sdhc_pdata = {
+	.init = pca100_sdhc2_init,
+	.exit = pca100_sdhc2_exit,
+};
+
+static void __init pca100_init(void)
+{
+	int ret;
+
+	ret = mxc_gpio_setup_multiple_pins(pca100_pins,
+			ARRAY_SIZE(pca100_pins), "PCA100");
+	if (ret)
+		printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+	mxc_gpio_mode(GPIO_PORTC | 29 | GPIO_GPIO | GPIO_IN);
+	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
+
+	mxc_register_device(&mxc_nand_device, &pca100_nand_board_info);
+
+	/* only the i2c master 1 is used on this CPU card */
+	i2c_register_board_info(1, pca100_i2c_devices,
+				ARRAY_SIZE(pca100_i2c_devices));
+
+	mxc_register_device(&mxc_i2c_device1, &pca100_i2c_1_data);
+
+	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+	mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_OUT);
+
+	/* GPIO0_IRQ */
+	mxc_gpio_mode(GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN);
+	/* GPIO1_IRQ */
+	mxc_gpio_mode(GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN);
+	/* GPIO2_IRQ */
+	mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN);
+
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+	spi_register_board_info(pca100_spi_board_info,
+				ARRAY_SIZE(pca100_spi_board_info));
+	mxc_register_device(&mxc_spi_device0, &pca100_spi_0_data);
+#endif
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init pca100_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer pca100_timer = {
+	.init = pca100_timer_init,
+};
+
+MACHINE_START(PCA100, "phyCARD-i.MX27")
+	.phys_io        = AIPI_BASE_ADDR,
+	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx27_map_io,
+	.init_irq       = mxc_init_irq,
+	.init_machine   = pca100_init,
+	.timer          = &pca100_timer,
+MACHINE_END
+
-- 
cgit v1.2.3


From 7bc07ebc7d2e9ad57baf205840ce31e9243ed5e8 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 17 Apr 2009 16:52:25 +0200
Subject: mx3x: Fixup USB base addresses

The i.MX31 and the i.MX35 have different USB base addresses. Adjust
the resources accordingly.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/devices.c           | 20 ++++++++++++++------
 arch/arm/plat-mxc/include/mach/mx31.h |  2 +-
 arch/arm/plat-mxc/include/mach/mx35.h |  1 +
 3 files changed, 16 insertions(+), 7 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index cde1b079242..8a577f36725 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -366,8 +366,8 @@ struct platform_device mx3_camera = {
 
 static struct resource otg_resources[] = {
 	{
-		.start	= OTG_BASE_ADDR,
-		.end	= OTG_BASE_ADDR + 0x1ff,
+		.start	= MX31_OTG_BASE_ADDR,
+		.end	= MX31_OTG_BASE_ADDR + 0x1ff,
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= MXC_INT_USB3,
@@ -408,8 +408,8 @@ static u64 usbh1_dmamask = ~(u32)0;
 
 static struct resource mxc_usbh1_resources[] = {
 	{
-		.start = OTG_BASE_ADDR + 0x200,
-		.end = OTG_BASE_ADDR + 0x3ff,
+		.start = MX31_OTG_BASE_ADDR + 0x200,
+		.end = MX31_OTG_BASE_ADDR + 0x3ff,
 		.flags = IORESOURCE_MEM,
 	}, {
 		.start = MXC_INT_USB1,
@@ -434,8 +434,8 @@ static u64 usbh2_dmamask = ~(u32)0;
 
 static struct resource mxc_usbh2_resources[] = {
 	{
-		.start = OTG_BASE_ADDR + 0x400,
-		.end = OTG_BASE_ADDR + 0x5ff,
+		.start = MX31_OTG_BASE_ADDR + 0x400,
+		.end = MX31_OTG_BASE_ADDR + 0x5ff,
 		.flags = IORESOURCE_MEM,
 	}, {
 		.start = MXC_INT_USB2,
@@ -547,6 +547,14 @@ static int mx3_devices_init(void)
 	if (cpu_is_mx35()) {
 		mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR;
 		mxc_nand_resources[0].end = MX35_NFC_BASE_ADDR + 0xfff;
+		otg_resources[0].start = MX35_OTG_BASE_ADDR;
+		otg_resources[0].end = MX35_OTG_BASE_ADDR + 0x1ff;
+		otg_resources[1].start = MXC_INT_USBOTG;
+		otg_resources[1].end = MXC_INT_USBOTG;
+		mxc_usbh1_resources[0].start = MX35_OTG_BASE_ADDR + 0x400;
+		mxc_usbh1_resources[0].end = MX35_OTG_BASE_ADDR + 0x5ff;
+		mxc_usbh1_resources[1].start = MXC_INT_USBHS;
+		mxc_usbh1_resources[1].end = MXC_INT_USBHS;
 	}
 
 	return 0;
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index 0b06941b613..14ac0dcc82f 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -4,7 +4,7 @@
 #define MX31_IRAM_BASE_ADDR		0x1FFC0000	/* internal ram */
 #define MX31_IRAM_SIZE			SZ_16K
 
-#define OTG_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00088000)
+#define MX31_OTG_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00088000)
 #define ATA_BASE_ADDR		(AIPS1_BASE_ADDR + 0x0008C000)
 #define UART4_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000B0000)
 #define UART5_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000B4000)
diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h
index 6465fefb42e..ab4cfec6c8a 100644
--- a/arch/arm/plat-mxc/include/mach/mx35.h
+++ b/arch/arm/plat-mxc/include/mach/mx35.h
@@ -5,6 +5,7 @@
 #define MX35_IRAM_SIZE		SZ_128K
 
 #define MXC_FEC_BASE_ADDR	0x50038000
+#define MX35_OTG_BASE_ADDR	0x53ff4000
 #define MX35_NFC_BASE_ADDR	0xBB000000
 
 /*
-- 
cgit v1.2.3


From 3fd2691a1dc80e42e6524bcbc228b1d35424d013 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 20 Mar 2009 19:25:01 +0100
Subject: MX31 Fix spi clock names

Fix the SPI clock names to match the device names.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/clock.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 4742554e996..06bd6180bfc 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -525,9 +525,9 @@ DEFINE_CLOCK(ckil_clk,    0, NULL,          0, clk_ckil_get_rate, NULL, NULL);
 
 static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "emi", emi_clk)
-	_REGISTER_CLOCK(NULL, "cspi", cspi1_clk)
-	_REGISTER_CLOCK(NULL, "cspi", cspi2_clk)
-	_REGISTER_CLOCK(NULL, "cspi", cspi3_clk)
+	_REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
+	_REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
+	_REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
 	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
 	_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
 	_REGISTER_CLOCK(NULL, "wdog", wdog_clk)
-- 
cgit v1.2.3


From 0160651a65d091f9fb3b7955347e04c1125765f8 Mon Sep 17 00:00:00 2001
From: Luotao Fu <l.fu@pengutronix.de>
Date: Thu, 18 Jun 2009 12:21:51 +0200
Subject: pcm038: mux configuration for predefined gpio line

Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
---
 arch/arm/mach-mx2/pcm038.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index 9a3483c8f58..ee65dda584c 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -216,6 +216,9 @@ static void __init pcm038_init(void)
 
 	mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data);
 
+	/* PE18 for user-LED D40 */
+	mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT);
+
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 #ifdef CONFIG_MACH_PCM970_BASEBOARD
-- 
cgit v1.2.3


From 8d5c1ed3f639f6ae012332d8ccdff429f3f11823 Mon Sep 17 00:00:00 2001
From: Luotao Fu <l.fu@pengutronix.de>
Date: Thu, 18 Jun 2009 14:15:22 +0200
Subject: pcm043: mux configuration for predefined gpio line

Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
---
 arch/arm/mach-mx3/pcm043.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/pcm043.c
index e43276ea3b7..e18a224671f 100644
--- a/arch/arm/mach-mx3/pcm043.c
+++ b/arch/arm/mach-mx3/pcm043.c
@@ -202,7 +202,8 @@ static struct pad_desc pcm043_pads[] = {
 	MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
 	MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
 	MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
-	MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL
+	/* gpio */
+	MX35_PAD_ATA_CS0__GPIO2_6,
 };
 
 /*
-- 
cgit v1.2.3


From e0fd4db372896d74e63097ee6463f97736440529 Mon Sep 17 00:00:00 2001
From: Luotao Fu <l.fu@pengutronix.de>
Date: Thu, 18 Jun 2009 16:44:18 +0200
Subject: pcm037: mux configuration for predefined gpio line

Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
---
 arch/arm/mach-mx3/pcm037.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index b1b3282d15d..6cbaabedf38 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -170,6 +170,8 @@ static unsigned int pcm037_pins[] = {
 	MX31_PIN_CSI_MCLK__CSI_MCLK,
 	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK,
 	MX31_PIN_CSI_VSYNC__CSI_VSYNC,
+	/* GPIO */
+	IOMUX_MODE(MX31_PIN_ATA_DMACK, IOMUX_CONFIG_GPIO),
 };
 
 static struct physmap_flash_data pcm037_flash_data = {
-- 
cgit v1.2.3


From 4bd1527a64f847a8aaec4f6055d9498db2646626 Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Wed, 12 Aug 2009 11:29:18 +0200
Subject: mx31: define various GPIOs used on mx31moboard

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/iomux-mx3.h | 11 +++++++++++
 1 file changed, 11 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index 67452732794..446f8676381 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -683,6 +683,17 @@ enum iomux_pins {
 #define MX31_PIN_GPIO3_1__GPIO3_1	IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_TXD2__GPIO1_28		IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_GPIO1_0__GPIO1_0	IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_SVEN0__GPIO2_0		IOMUX_MODE(MX31_PIN_SVEN0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_STX0__GPIO2_1		IOMUX_MODE(MX31_PIN_STX0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_SRX0__GPIO2_2		IOMUX_MODE(MX31_PIN_SRX0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_SIMPD0__GPIO2_3	IOMUX_MODE(MX31_PIN_SIMPD0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_DTR_DCE1__GPIO2_8	IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_DSR_DCE1__GPIO2_9	IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_RI_DCE1__GPIO2_10	IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_DCD_DCE1__GPIO2_11	IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_STXD5__GPIO1_21       IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_SRXD5__GPIO1_22       IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_GPIO)
+
 
 /*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
  * cspi1_ss1*/
-- 
cgit v1.2.3


From 77aa561db19229a36859018277f41be88684b487 Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Wed, 12 Aug 2009 11:29:19 +0200
Subject: mx31moboard: support for the 4 leds used on mx31moboard

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/mx31moboard.c | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index 2852bd58eda..ac337d26409 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -21,6 +21,7 @@
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/leds.h>
 #include <linux/memory.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/partitions.h>
@@ -72,6 +73,9 @@ static unsigned int moboard_pins[] = {
 	MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
 	MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
 	MX31_PIN_USB_OC__GPIO1_30,
+	/* LEDs */
+	MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
+	MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
 };
 
 static struct physmap_flash_data mx31moboard_flash_data = {
@@ -201,8 +205,39 @@ static struct fsl_usb2_platform_data usb_pdata = {
 	.phy_mode	= FSL_USB2_PHY_ULPI,
 };
 
+static struct gpio_led mx31moboard_leds[] = {
+	{
+		.name 	= "coreboard-led-0:red:running",
+		.default_trigger = "heartbeat",
+		.gpio 	= IOMUX_TO_GPIO(MX31_PIN_SVEN0),
+	}, {
+		.name	= "coreboard-led-1:red",
+		.gpio	= IOMUX_TO_GPIO(MX31_PIN_STX0),
+	}, {
+		.name	= "coreboard-led-2:red",
+		.gpio	= IOMUX_TO_GPIO(MX31_PIN_SRX0),
+	}, {
+		.name	= "coreboard-led-3:red",
+		.gpio	= IOMUX_TO_GPIO(MX31_PIN_SIMPD0),
+	},
+};
+
+static struct gpio_led_platform_data mx31moboard_led_pdata = {
+	.num_leds 	= ARRAY_SIZE(mx31moboard_leds),
+	.leds		= mx31moboard_leds,
+};
+
+static struct platform_device mx31moboard_leds_device = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &mx31moboard_led_pdata,
+	},
+};
+
 static struct platform_device *devices[] __initdata = {
 	&mx31moboard_flash,
+	&mx31moboard_leds_device,
 };
 
 static int mx31moboard_baseboard;
-- 
cgit v1.2.3


From 8b1a540c245d68a77dbd909359cfc709b6a3a1bf Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Wed, 12 Aug 2009 11:29:20 +0200
Subject: mx31moboard: initialize 4 input gpios for mx31moboard

These gpios are exported to userspace and are here to be used as
a selector

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/mx31moboard.c | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index ac337d26409..d3c6bb26271 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -76,6 +76,9 @@ static unsigned int moboard_pins[] = {
 	/* LEDs */
 	MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
 	MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
+	/* SEL */
+	MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
+	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
 };
 
 static struct physmap_flash_data mx31moboard_flash_data = {
@@ -235,6 +238,34 @@ static struct platform_device mx31moboard_leds_device = {
 	},
 };
 
+#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
+#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
+#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
+#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
+
+static void mx31moboard_init_sel_gpios(void)
+{
+	if (!gpio_request(SEL0, "sel0")) {
+		gpio_direction_input(SEL0);
+		gpio_export(SEL0, true);
+	}
+
+	if (!gpio_request(SEL1, "sel1")) {
+		gpio_direction_input(SEL1);
+		gpio_export(SEL1, true);
+	}
+
+	if (!gpio_request(SEL2, "sel2")) {
+		gpio_direction_input(SEL2);
+		gpio_export(SEL2, true);
+	}
+
+	if (!gpio_request(SEL3, "sel3")) {
+		gpio_direction_input(SEL3);
+		gpio_export(SEL3, true);
+	}
+}
+
 static struct platform_device *devices[] __initdata = {
 	&mx31moboard_flash,
 	&mx31moboard_leds_device,
@@ -256,6 +287,8 @@ static void __init mxc_board_init(void)
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 	mxc_register_device(&mxc_uart_device4, &uart_pdata);
 
+	mx31moboard_init_sel_gpios();
+
 	mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata);
 	mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata);
 
-- 
cgit v1.2.3


From 2718c15c5fffa9d05e5076451ab4fc81caac313f Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Wed, 12 Aug 2009 11:29:21 +0200
Subject: mx31moboard: two GPIOS are used to reset other microcontrolers on the
 robot

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/mx31moboard-marxbot.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 53ce7ff0637..3e2b73051b9 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -47,6 +47,8 @@ static unsigned int marxbot_pins[] = {
 	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
 	MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
 	MX31_PIN_TXD2__GPIO1_28,
+	/* dsPIC resets */
+	MX31_PIN_STXD5__GPIO1_21, MX31_PIN_SRXD5__GPIO1_22,
 };
 
 #define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
@@ -102,6 +104,22 @@ static struct imxmmc_platform_data sdhc2_pdata = {
 	.exit	= marxbot_sdhc2_exit,
 };
 
+#define TRSLAT_RST_B	IOMUX_TO_GPIO(MX31_PIN_STXD5)
+#define DSPICS_RST_B	IOMUX_TO_GPIO(MX31_PIN_SRXD5)
+
+static void dspics_resets_init(void)
+{
+	if (!gpio_request(TRSLAT_RST_B, "translator-rst")) {
+		gpio_direction_output(TRSLAT_RST_B, 1);
+		gpio_export(TRSLAT_RST_B, false);
+	}
+
+	if (!gpio_request(DSPICS_RST_B, "dspics-rst")) {
+		gpio_direction_output(DSPICS_RST_B, 1);
+		gpio_export(DSPICS_RST_B, false);
+	}
+}
+
 /*
  * system init for baseboard usage. Will be called by mx31moboard init.
  */
@@ -112,5 +130,7 @@ void __init mx31moboard_marxbot_init(void)
 	mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins),
 		"marxbot");
 
+	dspics_resets_init();
+
 	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
 }
-- 
cgit v1.2.3


From f6d2fa7dcbd438da4d150f695ebd219419a325ce Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 13 Aug 2009 10:02:30 +0200
Subject: MX21: Compilation fix for devices.c

The OTG devices are only available on i.MX27, so ifdef
them out for i.MX21.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/devices.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index 62810cbe4e3..50199aff014 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -437,6 +437,7 @@ struct platform_device mxc_sdhc_device1 = {
        .resource       = mxc_sdhc2_resources,
 };
 
+#ifdef CONFIG_MACH_MX27
 static struct resource otg_resources[] = {
 	{
 		.start	= OTG_BASE_ADDR,
@@ -527,7 +528,7 @@ struct platform_device mxc_usbh2 = {
 	.resource = mxc_usbh2_resources,
 	.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
 };
-
+#endif
 
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
-- 
cgit v1.2.3


From c35d3a418149f145ff0d90833db3e298e88de1ad Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 13 Aug 2009 10:04:44 +0200
Subject: mx21ads: Fix framebuffer platform data

struct imx_fb_platform_data has changed and the mx21ads was
forgotten to change. Fix it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/mx21ads.c | 44 ++++++++++++++++++++++++++------------------
 1 file changed, 26 insertions(+), 18 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx2/mx21ads.c b/arch/arm/mach-mx2/mx21ads.c
index a525783ceea..cf5f77cbc2f 100644
--- a/arch/arm/mach-mx2/mx21ads.c
+++ b/arch/arm/mach-mx2/mx21ads.c
@@ -164,25 +164,33 @@ static void mx21ads_fb_exit(struct platform_device *pdev)
  * Connected is a portrait Sharp-QVGA display
  * of type: LQ035Q7DB02
  */
+static struct imx_fb_videomode mx21ads_modes[] = {
+	{
+		.mode = {
+			.name		= "Sharp-LQ035Q7",
+			.refresh	= 60,
+			.xres		= 240,
+			.yres		= 320,
+			.pixclock	= 188679, /* in ps (5.3MHz) */
+			.hsync_len	= 2,
+			.left_margin	= 6,
+			.right_margin	= 16,
+			.vsync_len	= 1,
+			.upper_margin	= 8,
+			.lower_margin	= 10,
+		},
+		.pcr		= 0xfb108bc7,
+		.bpp		= 16,
+	},
+};
+
 static struct imx_fb_platform_data mx21ads_fb_data = {
-	.pixclock       = 188679, /* in ps */
-	.xres           = 240,
-	.yres           = 320,
-
-	.bpp            = 16,
-	.hsync_len      = 2,
-	.left_margin    = 6,
-	.right_margin   = 16,
-
-	.vsync_len      = 1,
-	.upper_margin   = 8,
-	.lower_margin   = 10,
-	.fixed_screen_cpu = 0,
-
-	.pcr            = 0xFB108BC7,
-	.pwmr           = 0x00A901ff,
-	.lscr1          = 0x00120300,
-	.dmacr          = 0x00020008,
+	.mode = mx21ads_modes,
+	.num_modes = ARRAY_SIZE(mx21ads_modes),
+
+	.pwmr		= 0x00a903ff,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00020008,
 
 	.init = mx21ads_fb_init,
 	.exit = mx21ads_fb_exit,
-- 
cgit v1.2.3


From 0a54419836254a27baecd9037103171bcbabaf67 Mon Sep 17 00:00:00 2001
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
Date: Fri, 14 Aug 2009 15:47:28 +0200
Subject: timekeeping: Move NTP adjusted clock multiplier to struct timekeeper

The clocksource structure has two multipliers, the unmodified multiplier
clock->mult_orig and the NTP corrected multiplier clock->mult. The NTP
multiplier is misplaced in the struct clocksource, this is private
information of the timekeeping code. Add the mult field to the struct
timekeeper to contain the NTP corrected value, keep the unmodifed
multiplier in clock->mult and remove clock->mult_orig.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Daniel Walker <dwalker@fifo99.com>
LKML-Reference: <20090814134810.149047645@de.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/arm/plat-omap/common.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index ebcf006406f..95587b6c025 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -253,11 +253,8 @@ static struct clocksource clocksource_32k = {
  */
 unsigned long long sched_clock(void)
 {
-	unsigned long long ret;
-
-	ret = (unsigned long long)clocksource_32k.read(&clocksource_32k);
-	ret = (ret * clocksource_32k.mult_orig) >> clocksource_32k.shift;
-	return ret;
+	return clocksource_cyc2ns(clocksource_32k.read(&clocksource_32k),
+				  clocksource_32k.mult, clocksource_32k.shift);
 }
 
 static int __init omap_init_clocksource_32k(void)
-- 
cgit v1.2.3


From 369842658a36bcea28ecb643ba4bdb53919330dd Mon Sep 17 00:00:00 2001
From: Mikael Pettersson <mikpe@it.uu.se>
Date: Sat, 15 Aug 2009 12:58:11 +0100
Subject: ARM: 5677/1: ARM support for
 TIF_RESTORE_SIGMASK/pselect6/ppoll/epoll_pwait

This patch adds support for TIF_RESTORE_SIGMASK to ARM's
signal handling, which allows to hook up the pselect6, ppoll,
and epoll_pwait syscalls on ARM.

Tested here with eabi userspace and a test program with a
deliberate race between a child's exit and the parent's
sigprocmask/select sequence. Using sys_pselect6() instead
of sigprocmask/select reliably prevents the race.

The other arch's support for TIF_RESTORE_SIGMASK has evolved
over time:

In 2.6.16:
- add TIF_RESTORE_SIGMASK which parallels TIF_SIGPENDING
- test both when checking for pending signal [changed later]
- reimplement sys_sigsuspend() to use current->saved_sigmask,
  TIF_RESTORE_SIGMASK [changed later], and -ERESTARTNOHAND;
  ditto for sys_rt_sigsuspend(), but drop private code and
  use common code via __ARCH_WANT_SYS_RT_SIGSUSPEND;
- there are now no "extra" calls to do_signal() so its oldset
  parameter is always &current->blocked so need not be passed,
  also its return value is changed to void
- change handle_signal() to return 0/-errno
- change do_signal() to honor TIF_RESTORE_SIGMASK:
  + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK
    is set
  + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK
  + if no signal was delivered and TIF_RESTORE_SIGMASK is set then
    clear it and restore the sigmask
- hook up sys_pselect6() and sys_ppoll()

In 2.6.19:
- hook up sys_epoll_pwait()

In 2.6.26:
- allow archs to override how TIF_RESTORE_SIGMASK is implemented;
  default set_restore_sigmask() sets both TIF_RESTORE_SIGMASK and
  TIF_SIGPENDING; archs need now just test TIF_SIGPENDING again
  when checking for pending signal work; some archs now implement
  TIF_RESTORE_SIGMASK as a secondary/non-atomic thread flag bit
- call set_restore_sigmask() in sys_sigsuspend() instead of setting
  TIF_RESTORE_SIGMASK

In 2.6.29-rc:
- kill sys_pselect7() which no arch wanted

So for 2.6.31-rc6/ARM this patch does the following:
- Add TIF_RESTORE_SIGMASK. Use the generic set_restore_sigmask()
  which sets both TIF_SIGPENDING and TIF_RESTORE_SIGMASK, so
  TIF_RESTORE_SIGMASK need not claim one of the scarce low thread
  flags, and existing TIF_SIGPENDING and _TIF_WORK_MASK tests need
  not be extended for TIF_RESTORE_SIGMASK.
- sys_sigsuspend() is reimplemented to use current->saved_sigmask
  and set_restore_sigmask(), making it identical to most other archs
- The private code for sys_rt_sigsuspend() is removed, instead
  generic code supplies it via __ARCH_WANT_SYS_RT_SIGSUSPEND.
- sys_sigsuspend() and sys_rt_sigsuspend() no longer need a pt_regs
  parameter, so their assembly code wrappers are removed.
- handle_signal() is changed to return 0 on success or -errno.
- The oldset parameter to do_signal() is now redundant and removed,
  and the return value is now also redundant and changed to void.
- do_signal() is changed to honor TIF_RESTORE_SIGMASK:
  + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK
    is set
  + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK
  + if no signal was delivered and TIF_RESTORE_SIGMASK is set then
    clear it and restore the sigmask
- Hook up sys_pselect6, sys_ppoll, and sys_epoll_pwait.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/thread_info.h |  2 +
 arch/arm/include/asm/unistd.h      |  7 ++--
 arch/arm/kernel/calls.S            | 10 ++---
 arch/arm/kernel/entry-common.S     | 10 -----
 arch/arm/kernel/signal.c           | 86 ++++++++++++++++----------------------
 5 files changed, 48 insertions(+), 67 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index 73394e50cbc..e20d80539b4 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -140,6 +140,7 @@ extern void vfp_sync_state(struct thread_info *thread);
 #define TIF_USING_IWMMXT	17
 #define TIF_MEMDIE		18
 #define TIF_FREEZE		19
+#define TIF_RESTORE_SIGMASK	20
 
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
@@ -147,6 +148,7 @@ extern void vfp_sync_state(struct thread_info *thread);
 #define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
 #define _TIF_USING_IWMMXT	(1 << TIF_USING_IWMMXT)
 #define _TIF_FREEZE		(1 << TIF_FREEZE)
+#define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
 
 /*
  * Change these and you break ASM code in entry-common.S
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index 0e97b8cb77d..9122c9ee18f 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -360,8 +360,8 @@
 #define __NR_readlinkat			(__NR_SYSCALL_BASE+332)
 #define __NR_fchmodat			(__NR_SYSCALL_BASE+333)
 #define __NR_faccessat			(__NR_SYSCALL_BASE+334)
-					/* 335 for pselect6 */
-					/* 336 for ppoll */
+#define __NR_pselect6			(__NR_SYSCALL_BASE+335)
+#define __NR_ppoll			(__NR_SYSCALL_BASE+336)
 #define __NR_unshare			(__NR_SYSCALL_BASE+337)
 #define __NR_set_robust_list		(__NR_SYSCALL_BASE+338)
 #define __NR_get_robust_list		(__NR_SYSCALL_BASE+339)
@@ -372,7 +372,7 @@
 #define __NR_vmsplice			(__NR_SYSCALL_BASE+343)
 #define __NR_move_pages			(__NR_SYSCALL_BASE+344)
 #define __NR_getcpu			(__NR_SYSCALL_BASE+345)
-					/* 346 for epoll_pwait */
+#define __NR_epoll_pwait		(__NR_SYSCALL_BASE+346)
 #define __NR_kexec_load			(__NR_SYSCALL_BASE+347)
 #define __NR_utimensat			(__NR_SYSCALL_BASE+348)
 #define __NR_signalfd			(__NR_SYSCALL_BASE+349)
@@ -432,6 +432,7 @@
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
 #define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
 
 #if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
 #define __ARCH_WANT_SYS_TIME
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index f776e72a4cb..ecfa98954d1 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -81,7 +81,7 @@
 		CALL(sys_ni_syscall)		/* was sys_ssetmask */
 /* 70 */	CALL(sys_setreuid16)
 		CALL(sys_setregid16)
-		CALL(sys_sigsuspend_wrapper)
+		CALL(sys_sigsuspend)
 		CALL(sys_sigpending)
 		CALL(sys_sethostname)
 /* 75 */	CALL(sys_setrlimit)
@@ -188,7 +188,7 @@
 		CALL(sys_rt_sigpending)
 		CALL(sys_rt_sigtimedwait)
 		CALL(sys_rt_sigqueueinfo)
-		CALL(sys_rt_sigsuspend_wrapper)
+		CALL(sys_rt_sigsuspend)
 /* 180 */	CALL(ABI(sys_pread64, sys_oabi_pread64))
 		CALL(ABI(sys_pwrite64, sys_oabi_pwrite64))
 		CALL(sys_chown16)
@@ -344,8 +344,8 @@
 		CALL(sys_readlinkat)
 		CALL(sys_fchmodat)
 		CALL(sys_faccessat)
-/* 335 */	CALL(sys_ni_syscall)		/* eventually pselect6 */
-		CALL(sys_ni_syscall)		/* eventually ppoll */
+/* 335 */	CALL(sys_pselect6)
+		CALL(sys_ppoll)
 		CALL(sys_unshare)
 		CALL(sys_set_robust_list)
 		CALL(sys_get_robust_list)
@@ -355,7 +355,7 @@
 		CALL(sys_vmsplice)
 		CALL(sys_move_pages)
 /* 345 */	CALL(sys_getcpu)
-		CALL(sys_ni_syscall)		/* eventually epoll_pwait */
+		CALL(sys_epoll_pwait)
 		CALL(sys_kexec_load)
 		CALL(sys_utimensat)
 		CALL(sys_signalfd)
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 366e5097a41..bfa7f0af7ed 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -373,16 +373,6 @@ sys_clone_wrapper:
 		b	sys_clone
 ENDPROC(sys_clone_wrapper)
 
-sys_sigsuspend_wrapper:
-		add	r3, sp, #S_OFF
-		b	sys_sigsuspend
-ENDPROC(sys_sigsuspend_wrapper)
-
-sys_rt_sigsuspend_wrapper:
-		add	r2, sp, #S_OFF
-		b	sys_rt_sigsuspend
-ENDPROC(sys_rt_sigsuspend_wrapper)
-
 sys_sigreturn_wrapper:
 		add	r0, sp, #S_OFF
 		b	sys_sigreturn
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 93bb4247b7e..e27ee1f701d 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -47,57 +47,22 @@ const unsigned long sigreturn_codes[7] = {
 	MOV_R7_NR_RT_SIGRETURN, SWI_SYS_RT_SIGRETURN, SWI_THUMB_RT_SIGRETURN,
 };
 
-static int do_signal(sigset_t *oldset, struct pt_regs * regs, int syscall);
-
 /*
  * atomically swap in the new signal mask, and wait for a signal.
  */
-asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t mask, struct pt_regs *regs)
+asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t mask)
 {
-	sigset_t saveset;
-
 	mask &= _BLOCKABLE;
 	spin_lock_irq(&current->sighand->siglock);
-	saveset = current->blocked;
+	current->saved_sigmask = current->blocked;
 	siginitset(&current->blocked, mask);
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
-	regs->ARM_r0 = -EINTR;
-
-	while (1) {
-		current->state = TASK_INTERRUPTIBLE;
-		schedule();
-		if (do_signal(&saveset, regs, 0))
-			return regs->ARM_r0;
-	}
-}
-
-asmlinkage int
-sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize, struct pt_regs *regs)
-{
-	sigset_t saveset, newset;
-
-	/* XXX: Don't preclude handling different sized sigset_t's. */
-	if (sigsetsize != sizeof(sigset_t))
-		return -EINVAL;
-
-	if (copy_from_user(&newset, unewset, sizeof(newset)))
-		return -EFAULT;
-	sigdelsetmask(&newset, ~_BLOCKABLE);
-
-	spin_lock_irq(&current->sighand->siglock);
-	saveset = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-	regs->ARM_r0 = -EINTR;
 
-	while (1) {
-		current->state = TASK_INTERRUPTIBLE;
-		schedule();
-		if (do_signal(&saveset, regs, 0))
-			return regs->ARM_r0;
-	}
+	current->state = TASK_INTERRUPTIBLE;
+	schedule();
+	set_restore_sigmask();
+	return -ERESTARTNOHAND;
 }
 
 asmlinkage int 
@@ -545,7 +510,7 @@ static inline void setup_syscall_restart(struct pt_regs *regs)
 /*
  * OK, we're invoking a handler
  */	
-static void
+static int
 handle_signal(unsigned long sig, struct k_sigaction *ka,
 	      siginfo_t *info, sigset_t *oldset,
 	      struct pt_regs * regs, int syscall)
@@ -596,7 +561,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
 
 	if (ret != 0) {
 		force_sigsegv(sig, tsk);
-		return;
+		return ret;
 	}
 
 	/*
@@ -610,6 +575,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
 	recalc_sigpending();
 	spin_unlock_irq(&tsk->sighand->siglock);
 
+	return 0;
 }
 
 /*
@@ -621,7 +587,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
  * the kernel can handle, and then we build all the user-level signal handling
  * stack-frames in one go after that.
  */
-static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
+static void do_signal(struct pt_regs *regs, int syscall)
 {
 	struct k_sigaction ka;
 	siginfo_t info;
@@ -634,7 +600,7 @@ static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
 	 * if so.
 	 */
 	if (!user_mode(regs))
-		return 0;
+		return;
 
 	if (try_to_freeze())
 		goto no_signal;
@@ -643,9 +609,24 @@ static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
 
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
 	if (signr > 0) {
-		handle_signal(signr, &ka, &info, oldset, regs, syscall);
+		sigset_t *oldset;
+
+		if (test_thread_flag(TIF_RESTORE_SIGMASK))
+			oldset = &current->saved_sigmask;
+		else
+			oldset = &current->blocked;
+		if (handle_signal(signr, &ka, &info, oldset, regs, syscall) == 0) {
+			/*
+			 * A signal was successfully delivered; the saved
+			 * sigmask will have been stored in the signal frame,
+			 * and will be restored by sigreturn, so we can simply
+			 * clear the TIF_RESTORE_SIGMASK flag.
+			 */
+			if (test_thread_flag(TIF_RESTORE_SIGMASK))
+				clear_thread_flag(TIF_RESTORE_SIGMASK);
+		}
 		single_step_set(current);
-		return 1;
+		return;
 	}
 
  no_signal:
@@ -697,14 +678,21 @@ static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
 		    regs->ARM_r0 == -ERESTARTNOINTR) {
 			setup_syscall_restart(regs);
 		}
+
+		/* If there's no signal to deliver, we just put the saved sigmask
+		 * back.
+		 */
+		if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+			clear_thread_flag(TIF_RESTORE_SIGMASK);
+			sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
+		}
 	}
 	single_step_set(current);
-	return 0;
 }
 
 asmlinkage void
 do_notify_resume(struct pt_regs *regs, unsigned int thread_flags, int syscall)
 {
 	if (thread_flags & _TIF_SIGPENDING)
-		do_signal(&current->blocked, regs, syscall);
+		do_signal(regs, syscall);
 }
-- 
cgit v1.2.3


From 5ad73d07173e7b76c16bcb8b6cf64d8386019689 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Mon, 10 Aug 2009 12:51:56 +0100
Subject: ARM: 5665/1: U300 syscon register updates

This adds in a few new register and defines for improved padmux
support and some figures that were plain wrong on the targeted
U300 platforms.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-u300/include/mach/syscon.h | 120 +++++++++++++++++++++++++++++--
 1 file changed, 113 insertions(+), 7 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-u300/include/mach/syscon.h b/arch/arm/mach-u300/include/mach/syscon.h
index 1c90d1b1ccb..7444f5c7da9 100644
--- a/arch/arm/mach-u300/include/mach/syscon.h
+++ b/arch/arm/mach-u300/include/mach/syscon.h
@@ -240,8 +240,13 @@
 #define U300_SYSCON_PMC1LR_CDI_MASK				(0xC000)
 #define U300_SYSCON_PMC1LR_CDI_CDI				(0x0000)
 #define U300_SYSCON_PMC1LR_CDI_EMIF				(0x4000)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_PMC1LR_CDI_CDI2				(0x8000)
+#define U300_SYSCON_PMC1LR_CDI_WCDMA_APP_GPIO			(0xC000)
+#elif CONFIG_MACH_U300_BS365
 #define U300_SYSCON_PMC1LR_CDI_GPIO				(0x8000)
 #define U300_SYSCON_PMC1LR_CDI_WCDMA				(0xC000)
+#endif
 #define U300_SYSCON_PMC1LR_PDI_MASK				(0x3000)
 #define U300_SYSCON_PMC1LR_PDI_PDI				(0x0000)
 #define U300_SYSCON_PMC1LR_PDI_EGG				(0x1000)
@@ -345,19 +350,69 @@
 #define U300_SYSCON_MMCR_MASK					(0x0003)
 #define U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE			(0x0002)
 #define U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE			(0x0001)
-
+/* Pull up/down control (R/W) */
+#define U300_SYSCON_PUCR					(0x104)
+#define U300_SYSCON_PUCR_EMIF_1_WAIT_N_PU_ENABLE		(0x0200)
+#define U300_SYSCON_PUCR_EMIF_1_NFIF_READY_PU_ENABLE		(0x0100)
+#define U300_SYSCON_PUCR_EMIF_1_16BIT_PU_ENABLE			(0x0080)
+#define U300_SYSCON_PUCR_EMIF_1_8BIT_PU_ENABLE			(0x0040)
+#define U300_SYSCON_PUCR_KEY_IN_PU_EN_MASK			(0x003F)
+/* Padmux 2 control */
+#define U300_SYSCON_PMC2R					(0x100)
+#define U300_SYSCON_PMC2R_APP_MISC_0_MASK			(0x00C0)
+#define U300_SYSCON_PMC2R_APP_MISC_0_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC2R_APP_MISC_0_EMIF_SDRAM			(0x0040)
+#define U300_SYSCON_PMC2R_APP_MISC_0_MMC			(0x0080)
+#define U300_SYSCON_PMC2R_APP_MISC_0_CDI2			(0x00C0)
+#define U300_SYSCON_PMC2R_APP_MISC_1_MASK			(0x0300)
+#define U300_SYSCON_PMC2R_APP_MISC_1_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC2R_APP_MISC_1_EMIF_SDRAM			(0x0100)
+#define U300_SYSCON_PMC2R_APP_MISC_1_MMC			(0x0200)
+#define U300_SYSCON_PMC2R_APP_MISC_1_CDI2			(0x0300)
+#define U300_SYSCON_PMC2R_APP_MISC_2_MASK			(0x0C00)
+#define U300_SYSCON_PMC2R_APP_MISC_2_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC2R_APP_MISC_2_EMIF_SDRAM			(0x0400)
+#define U300_SYSCON_PMC2R_APP_MISC_2_MMC			(0x0800)
+#define U300_SYSCON_PMC2R_APP_MISC_2_CDI2			(0x0C00)
+#define U300_SYSCON_PMC2R_APP_MISC_3_MASK			(0x3000)
+#define U300_SYSCON_PMC2R_APP_MISC_3_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC2R_APP_MISC_3_EMIF_SDRAM			(0x1000)
+#define U300_SYSCON_PMC2R_APP_MISC_3_MMC			(0x2000)
+#define U300_SYSCON_PMC2R_APP_MISC_3_CDI2			(0x3000)
+#define U300_SYSCON_PMC2R_APP_MISC_4_MASK			(0xC000)
+#define U300_SYSCON_PMC2R_APP_MISC_4_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC2R_APP_MISC_4_EMIF_SDRAM			(0x4000)
+#define U300_SYSCON_PMC2R_APP_MISC_4_MMC			(0x8000)
+#define U300_SYSCON_PMC2R_APP_MISC_4_ACC_GPIO			(0xC000)
 /* TODO: More SYSCON registers missing */
 #define U300_SYSCON_PMC3R					(0x10c)
 #define U300_SYSCON_PMC3R_APP_MISC_11_MASK			(0xc000)
 #define U300_SYSCON_PMC3R_APP_MISC_11_SPI			(0x4000)
 #define U300_SYSCON_PMC3R_APP_MISC_10_MASK			(0x3000)
 #define U300_SYSCON_PMC3R_APP_MISC_10_SPI			(0x1000)
-/* TODO: Missing other configs, I just added the SPI stuff */
-
+/* TODO: Missing other configs */
+#define U300_SYSCON_PMC4R					(0x168)
+#define U300_SYSCON_PMC4R_APP_MISC_12_MASK			(0x0003)
+#define U300_SYSCON_PMC4R_APP_MISC_12_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC4R_APP_MISC_13_MASK			(0x000C)
+#define U300_SYSCON_PMC4R_APP_MISC_13_CDI			(0x0000)
+#define U300_SYSCON_PMC4R_APP_MISC_13_SMIA			(0x0004)
+#define U300_SYSCON_PMC4R_APP_MISC_13_SMIA2			(0x0008)
+#define U300_SYSCON_PMC4R_APP_MISC_13_APP_GPIO			(0x000C)
+#define U300_SYSCON_PMC4R_APP_MISC_14_MASK			(0x0030)
+#define U300_SYSCON_PMC4R_APP_MISC_14_CDI			(0x0000)
+#define U300_SYSCON_PMC4R_APP_MISC_14_SMIA			(0x0010)
+#define U300_SYSCON_PMC4R_APP_MISC_14_CDI2			(0x0020)
+#define U300_SYSCON_PMC4R_APP_MISC_14_APP_GPIO			(0x0030)
+#define U300_SYSCON_PMC4R_APP_MISC_16_MASK			(0x0300)
+#define U300_SYSCON_PMC4R_APP_MISC_16_APP_GPIO_13		(0x0000)
+#define U300_SYSCON_PMC4R_APP_MISC_16_APP_UART1_CTS		(0x0100)
+#define U300_SYSCON_PMC4R_APP_MISC_16_EMIF_1_STATIC_CS5_N	(0x0200)
 /* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */
 #define U300_SYSCON_S0CCR					(0x120)
 #define U300_SYSCON_S0CCR_FIELD_MASK				(0x43FF)
 #define U300_SYSCON_S0CCR_CLOCK_REQ				(0x4000)
+#define U300_SYSCON_S0CCR_CLOCK_REQ_MONITOR			(0x2000)
 #define U300_SYSCON_S0CCR_CLOCK_INV				(0x0200)
 #define U300_SYSCON_S0CCR_CLOCK_FREQ_MASK			(0x01E0)
 #define U300_SYSCON_S0CCR_CLOCK_SELECT_MASK			(0x001E)
@@ -375,6 +430,7 @@
 #define U300_SYSCON_S1CCR					(0x124)
 #define U300_SYSCON_S1CCR_FIELD_MASK				(0x43FF)
 #define U300_SYSCON_S1CCR_CLOCK_REQ				(0x4000)
+#define U300_SYSCON_S1CCR_CLOCK_REQ_MONITOR			(0x2000)
 #define U300_SYSCON_S1CCR_CLOCK_INV				(0x0200)
 #define U300_SYSCON_S1CCR_CLOCK_FREQ_MASK			(0x01E0)
 #define U300_SYSCON_S1CCR_CLOCK_SELECT_MASK			(0x001E)
@@ -393,6 +449,7 @@
 #define U300_SYSCON_S2CCR_FIELD_MASK				(0xC3FF)
 #define U300_SYSCON_S2CCR_CLK_STEAL				(0x8000)
 #define U300_SYSCON_S2CCR_CLOCK_REQ				(0x4000)
+#define U300_SYSCON_S2CCR_CLOCK_REQ_MONITOR			(0x2000)
 #define U300_SYSCON_S2CCR_CLOCK_INV				(0x0200)
 #define U300_SYSCON_S2CCR_CLOCK_FREQ_MASK			(0x01E0)
 #define U300_SYSCON_S2CCR_CLOCK_SELECT_MASK			(0x001E)
@@ -425,6 +482,44 @@
 #define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_0_SDRAM			(0x000C)
 #define U300_SYSCON_MCR_PM1G_MODE_ENABLE			(0x0002)
 #define U300_SYSCON_MCR_PMTG5_MODE_ENABLE			(0x0001)
+/* SC_PLL_IRQ_CONTROL 16bit (R/W) */
+#define U300_SYSCON_PICR					(0x0130)
+#define U300_SYSCON_PICR_MASK					(0x00FF)
+#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_LOW_ENABLE		(0x0080)
+#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_HIGH_ENABLE		(0x0040)
+#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_LOW_ENABLE		(0x0020)
+#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_HIGH_ENABLE		(0x0010)
+#define U300_SYSCON_PICR_IRQMASK_PLL13_UNLOCK_ENABLE		(0x0008)
+#define U300_SYSCON_PICR_IRQMASK_PLL13_LOCK_ENABLE		(0x0004)
+#define U300_SYSCON_PICR_IRQMASK_PLL208_UNLOCK_ENABLE		(0x0002)
+#define U300_SYSCON_PICR_IRQMASK_PLL208_LOCK_ENABLE		(0x0001)
+/* SC_PLL_IRQ_STATUS 16 bit (R/-) */
+#define U300_SYSCON_PISR					(0x0134)
+#define U300_SYSCON_PISR_MASK					(0x000F)
+#define U300_SYSCON_PISR_PLL13_UNLOCK_IND			(0x0008)
+#define U300_SYSCON_PISR_PLL13_LOCK_IND				(0x0004)
+#define U300_SYSCON_PISR_PLL208_UNLOCK_IND			(0x0002)
+#define U300_SYSCON_PISR_PLL208_LOCK_IND			(0x0001)
+/* SC_PLL_IRQ_CLEAR 16 bit (-/W) */
+#define U300_SYSCON_PICLR					(0x0138)
+#define U300_SYSCON_PICLR_MASK					(0x000F)
+#define U300_SYSCON_PICLR_RWMASK				(0x0000)
+#define U300_SYSCON_PICLR_PLL13_UNLOCK_SC			(0x0008)
+#define U300_SYSCON_PICLR_PLL13_LOCK_SC				(0x0004)
+#define U300_SYSCON_PICLR_PLL208_UNLOCK_SC			(0x0002)
+#define U300_SYSCON_PICLR_PLL208_LOCK_SC			(0x0001)
+/* CAMIF_CONTROL 16 bit (-/W) */
+#define U300_SYSCON_CICR					(0x013C)
+#define U300_SYSCON_CICR_MASK					(0x0FFF)
+#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_MASK		(0x0F00)
+#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_PORT1		(0x0C00)
+#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_PORT0		(0x0300)
+#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_MASK		(0x00F0)
+#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_PORT1		(0x00C0)
+#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_PORT0		(0x0030)
+#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_MASK		(0x000F)
+#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_PORT1		(0x000C)
+#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_PORT0		(0x0003)
 /* Clock activity observability register 0 */
 #define U300_SYSCON_C0OAR					(0x140)
 #define U300_SYSCON_C0OAR_MASK					(0xFFFF)
@@ -513,7 +608,7 @@
 /**
  * CPU medium frequency in MHz
  */
-#define SYSCON_CPU_CLOCK_MEDIUM  104
+#define SYSCON_CPU_CLOCK_MEDIUM   52
 /**
  * CPU low frequency in MHz
  */
@@ -527,7 +622,7 @@
 /**
  * EMIF medium frequency in MHz
  */
-#define SYSCON_EMIF_CLOCK_MEDIUM 104
+#define SYSCON_EMIF_CLOCK_MEDIUM  52
 /**
  * EMIF low frequency in MHz
  */
@@ -541,7 +636,7 @@
 /**
  * AHB medium frequency in MHz
  */
-#define SYSCON_AHB_CLOCK_MEDIUM   52
+#define SYSCON_AHB_CLOCK_MEDIUM   26
 /**
  * AHB low frequency in MHz
  */
@@ -553,6 +648,15 @@ enum syscon_busmaster {
   SYSCON_BM_VIDEO_ENC
 };
 
+/* Selectr a resistor or a set of resistors */
+enum syscon_pull_up_down {
+  SYSCON_PU_KEY_IN_EN,
+  SYSCON_PU_EMIF_1_8_BIT_EN,
+  SYSCON_PU_EMIF_1_16_BIT_EN,
+  SYSCON_PU_EMIF_1_NFIF_READY_EN,
+  SYSCON_PU_EMIF_1_NFIF_WAIT_N_EN,
+};
+
 /*
  * Note that this array must match the order of the array "clk_reg"
  * in syscon.c
@@ -575,6 +679,7 @@ enum syscon_clk {
   SYSCON_CLKCONTROL_SPI,
   SYSCON_CLKCONTROL_I2S0_CORE,
   SYSCON_CLKCONTROL_I2S1_CORE,
+  SYSCON_CLKCONTROL_UART1,
   SYSCON_CLKCONTROL_AAIF,
   SYSCON_CLKCONTROL_AHB,
   SYSCON_CLKCONTROL_APEX,
@@ -604,7 +709,8 @@ enum syscon_sysclk_mode {
 
 enum syscon_sysclk_req {
   SYSCON_SYSCLKREQ_DISABLED,
-  SYSCON_SYSCLKREQ_ACTIVE_LOW
+  SYSCON_SYSCLKREQ_ACTIVE_LOW,
+  SYSCON_SYSCLKREQ_MONITOR
 };
 
 enum syscon_clk_mode {
-- 
cgit v1.2.3


From df1e0520f9434b5b771c854a13dd928727d8673a Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Mon, 10 Aug 2009 12:52:40 +0100
Subject: ARM: 5666/1: Revamped U300 padmux API

This abstracts the hackish padmux API on the U300 platform into
something more manageable. It provides a way for drivers to
activate/deactivate a certain padmux setting. It will also switch
the users of the old API over to using the new style, pushing
muxing into the apropriate setup files.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-u300/gpio.c   |  13 --
 arch/arm/mach-u300/mmc.c    |  16 ++
 arch/arm/mach-u300/padmux.c | 395 +++++++++++++++++++++++++++++++++++++++-----
 arch/arm/mach-u300/padmux.h |  28 +++-
 4 files changed, 392 insertions(+), 60 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-u300/gpio.c b/arch/arm/mach-u300/gpio.c
index 308cdb197a9..63c8f27fb15 100644
--- a/arch/arm/mach-u300/gpio.c
+++ b/arch/arm/mach-u300/gpio.c
@@ -25,11 +25,6 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 
-/* Need access to SYSCON registers for PADmuxing */
-#include <mach/syscon.h>
-
-#include "padmux.h"
-
 /* Reference to GPIO block clock */
 static struct clk *clk;
 
@@ -606,14 +601,6 @@ static int __init gpio_probe(struct platform_device *pdev)
 	writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE, virtbase + U300_GPIO_CR);
 #endif
 
-	/* Set up some padmuxing here */
-#ifdef CONFIG_MMC
-	pmx_set_mission_mode_mmc();
-#endif
-#ifdef CONFIG_SPI_PL022
-	pmx_set_mission_mode_spi();
-#endif
-
 	gpio_set_initial_values();
 
 	for (num_irqs = 0 ; num_irqs < U300_GPIO_NUM_PORTS; num_irqs++) {
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
index 3138d3955c9..e66284d7356 100644
--- a/arch/arm/mach-u300/mmc.c
+++ b/arch/arm/mach-u300/mmc.c
@@ -22,6 +22,7 @@
 
 #include <asm/mach/mmc.h>
 #include "mmc.h"
+#include "padmux.h"
 
 struct mmci_card_event {
 	struct input_dev *mmc_input;
@@ -146,6 +147,7 @@ int __devinit mmc_init(struct amba_device *adev)
 {
 	struct mmci_card_event *mmci_card;
 	struct device *mmcsd_device = &adev->dev;
+	struct pmx *pmx;
 	int ret = 0;
 
 	mmci_card = kzalloc(sizeof(struct mmci_card_event), GFP_KERNEL);
@@ -205,6 +207,20 @@ int __devinit mmc_init(struct amba_device *adev)
 
 	input_set_drvdata(mmci_card->mmc_input, mmci_card);
 
+	/*
+	 * Setup padmuxing for MMC. Since this must always be
+	 * compiled into the kernel, pmx is never released.
+	 */
+	pmx = pmx_get(mmcsd_device, U300_APP_PMX_MMC_SETTING);
+
+	if (IS_ERR(pmx))
+		pr_warning("Could not get padmux handle\n");
+	else {
+		ret = pmx_activate(mmcsd_device, pmx);
+		if (IS_ERR_VALUE(ret))
+			pr_warning("Could not activate padmuxing\n");
+	}
+
 	ret = gpio_register_callback(U300_GPIO_PIN_MMC_CD, mmci_callback,
 				     mmci_card);
 
diff --git a/arch/arm/mach-u300/padmux.c b/arch/arm/mach-u300/padmux.c
index f3664564f08..4c93c6cefd3 100644
--- a/arch/arm/mach-u300/padmux.c
+++ b/arch/arm/mach-u300/padmux.c
@@ -6,53 +6,362 @@
  * Copyright (C) 2009 ST-Ericsson AB
  * License terms: GNU General Public License (GPL) version 2
  * U300 PADMUX functions
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- *
+ * Author: Martin Persson <martin.persson@stericsson.com>
  */
-#include <linux/io.h>
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
 #include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/mutex.h>
+#include <linux/string.h>
+#include <linux/bug.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
 #include <mach/u300-regs.h>
 #include <mach/syscon.h>
-
 #include "padmux.h"
 
-/* Set the PAD MUX to route the MMC reader correctly to GPIO0. */
-void pmx_set_mission_mode_mmc(void)
-{
-	u16 val;
-
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1LR);
-	val &= ~U300_SYSCON_PMC1LR_MMCSD_MASK;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1LR);
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
-	val &= ~U300_SYSCON_PMC1HR_APP_GPIO_1_MASK;
-	val |= U300_SYSCON_PMC1HR_APP_GPIO_1_MMC;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
-}
-
-void pmx_set_mission_mode_spi(void)
-{
-	u16 val;
-
-	/* Set up padmuxing so the SPI port and its chipselects are active */
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
-	/*
-	 * Activate the SPI port (disable the use of these pins for generic
-	 * GPIO, DSP, AAIF
-	 */
-	val &= ~U300_SYSCON_PMC1HR_APP_SPI_2_MASK;
-	val |= U300_SYSCON_PMC1HR_APP_SPI_2_SPI;
-	/*
-	 * Use GPIO pin SPI CS1 for CS1 actually (it can be used for other
-	 * things also)
-	 */
-	val &= ~U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK;
-	val |= U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI;
-	/*
-	 * Use GPIO pin SPI CS2 for CS2 actually (it can be used for other
-	 * things also)
-	 */
-	val &= ~U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK;
-	val |= U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
+static DEFINE_MUTEX(pmx_mutex);
+
+const u32 pmx_registers[] = {
+	(U300_SYSCON_VBASE + U300_SYSCON_PMC1LR),
+	(U300_SYSCON_VBASE + U300_SYSCON_PMC1HR),
+	(U300_SYSCON_VBASE + U300_SYSCON_PMC2R),
+	(U300_SYSCON_VBASE + U300_SYSCON_PMC3R),
+	(U300_SYSCON_VBASE + U300_SYSCON_PMC4R)
+};
+
+/* High level functionality */
+
+/* Lazy dog:
+ * onmask = {
+ *   {"PMC1LR" mask, "PMC1LR" value},
+ *   {"PMC1HR" mask, "PMC1HR" value},
+ *   {"PMC2R"  mask, "PMC2R"  value},
+ *   {"PMC3R"  mask, "PMC3R"  value},
+ *   {"PMC4R"  mask, "PMC4R"  value}
+ * }
+ */
+static struct pmx mmc_setting = {
+	.setting = U300_APP_PMX_MMC_SETTING,
+	.default_on = false,
+	.activated = false,
+	.name = "MMC",
+	.onmask = {
+		   {U300_SYSCON_PMC1LR_MMCSD_MASK,
+		    U300_SYSCON_PMC1LR_MMCSD_MMCSD},
+		   {0, 0},
+		   {0, 0},
+		   {0, 0},
+		   {U300_SYSCON_PMC4R_APP_MISC_12_MASK,
+		    U300_SYSCON_PMC4R_APP_MISC_12_APP_GPIO}
+		   },
+};
+
+static struct pmx spi_setting = {
+	.setting = U300_APP_PMX_SPI_SETTING,
+	.default_on = false,
+	.activated = false,
+	.name = "SPI",
+	.onmask = {{0, 0},
+		   {U300_SYSCON_PMC1HR_APP_SPI_2_MASK |
+		    U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK |
+		    U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK,
+		    U300_SYSCON_PMC1HR_APP_SPI_2_SPI |
+		    U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI |
+		    U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI},
+		   {0, 0},
+		   {0, 0},
+		   {0, 0}
+		   },
+};
+
+/* Available padmux settings */
+static struct pmx *pmx_settings[] = {
+	&mmc_setting,
+	&spi_setting,
+};
+
+static void update_registers(struct pmx *pmx, bool activate)
+{
+	u16 regval, val, mask;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(pmx_registers); i++) {
+		if (activate)
+			val = pmx->onmask[i].val;
+		else
+			val = 0;
+
+		mask = pmx->onmask[i].mask;
+		if (mask != 0) {
+			regval = readw(pmx_registers[i]);
+			regval &= ~mask;
+			regval |= val;
+			writew(regval, pmx_registers[i]);
+		}
+	}
+}
+
+struct pmx *pmx_get(struct device *dev, enum pmx_settings setting)
+{
+	int i;
+	struct pmx *pmx = ERR_PTR(-ENOENT);
+
+	if (dev == NULL)
+		return ERR_PTR(-EINVAL);
+
+	mutex_lock(&pmx_mutex);
+	for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+
+		if (setting == pmx_settings[i]->setting) {
+
+			if (pmx_settings[i]->dev != NULL) {
+				WARN(1, "padmux: required setting "
+				     "in use by another consumer\n");
+			} else {
+				pmx = pmx_settings[i];
+				pmx->dev = dev;
+				dev_dbg(dev, "padmux: setting nr %d is now "
+					"bound to %s and ready to use\n",
+					setting, dev_name(dev));
+				break;
+			}
+		}
+	}
+	mutex_unlock(&pmx_mutex);
+
+	return pmx;
+}
+EXPORT_SYMBOL(pmx_get);
+
+int pmx_put(struct device *dev, struct pmx *pmx)
+{
+	int i;
+	int ret = -ENOENT;
+
+	if (pmx == NULL || dev == NULL)
+		return -EINVAL;
+
+	mutex_lock(&pmx_mutex);
+	for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+
+		if (pmx->setting == pmx_settings[i]->setting) {
+
+			if (dev != pmx->dev) {
+				WARN(1, "padmux: cannot release handle as "
+					"it is bound to another consumer\n");
+				ret = -EINVAL;
+				break;
+			} else {
+				pmx_settings[i]->dev = NULL;
+				ret = 0;
+				break;
+			}
+		}
+	}
+	mutex_unlock(&pmx_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL(pmx_put);
+
+int pmx_activate(struct device *dev, struct pmx *pmx)
+{
+	int i, j, ret;
+	ret = 0;
+
+	if (pmx == NULL || dev == NULL)
+		return -EINVAL;
+
+	mutex_lock(&pmx_mutex);
+
+	/* Make sure the required bits are not used */
+	for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+
+		if (pmx_settings[i]->dev == NULL || pmx_settings[i] == pmx)
+			continue;
+
+		for (j = 0; j < ARRAY_SIZE(pmx_registers); j++) {
+
+			if (pmx_settings[i]->onmask[j].mask & pmx->
+				onmask[j].mask) {
+				/* More than one entry on the same bits */
+				WARN(1, "padmux: cannot activate "
+					"setting. Bit conflict with "
+					"an active setting\n");
+
+				ret = -EUSERS;
+				goto exit;
+			}
+		}
+	}
+	update_registers(pmx, true);
+	pmx->activated = true;
+	dev_dbg(dev, "padmux: setting nr %d is activated\n",
+		pmx->setting);
+
+exit:
+	mutex_unlock(&pmx_mutex);
+	return ret;
+}
+EXPORT_SYMBOL(pmx_activate);
+
+int pmx_deactivate(struct device *dev, struct pmx *pmx)
+{
+	int i;
+	int ret = -ENOENT;
+
+	if (pmx == NULL || dev == NULL)
+		return -EINVAL;
+
+	mutex_lock(&pmx_mutex);
+	for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+
+		if (pmx_settings[i]->dev == NULL)
+			continue;
+
+		if (pmx->setting == pmx_settings[i]->setting) {
+
+			if (dev != pmx->dev) {
+				WARN(1, "padmux: cannot deactivate "
+				     "pmx setting as it was activated "
+				     "by another consumer\n");
+
+				ret = -EBUSY;
+				continue;
+			} else {
+				update_registers(pmx, false);
+				pmx_settings[i]->dev = NULL;
+				pmx->activated = false;
+				ret = 0;
+				dev_dbg(dev, "padmux: setting nr %d is deactivated",
+					pmx->setting);
+				break;
+			}
+		}
+	}
+	mutex_unlock(&pmx_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL(pmx_deactivate);
+
+/*
+ * For internal use only. If it is to be exported,
+ * it should be reentrant. Notice that pmx_activate
+ * (i.e. runtime settings) always override default settings.
+ */
+static int pmx_set_default(void)
+{
+	/* Used to identify several entries on the same bits */
+	u16 modbits[ARRAY_SIZE(pmx_registers)];
+
+	int i, j;
+
+	memset(modbits, 0, ARRAY_SIZE(pmx_registers) * sizeof(u16));
+
+	for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+
+		if (!pmx_settings[i]->default_on)
+			continue;
+
+		for (j = 0; j < ARRAY_SIZE(pmx_registers); j++) {
+
+			/* Make sure there is only one entry on the same bits */
+			if (modbits[j] & pmx_settings[i]->onmask[j].mask) {
+				BUG();
+				return -EUSERS;
+			}
+			modbits[j] |= pmx_settings[i]->onmask[j].mask;
+		}
+		update_registers(pmx_settings[i], true);
+	}
+	return 0;
 }
+
+#if (defined(CONFIG_DEBUG_FS) && defined(CONFIG_U300_DEBUG))
+static int pmx_show(struct seq_file *s, void *data)
+{
+	int i;
+	seq_printf(s, "-------------------------------------------------\n");
+	seq_printf(s, "SETTING     BOUND TO DEVICE               STATE\n");
+	seq_printf(s, "-------------------------------------------------\n");
+	mutex_lock(&pmx_mutex);
+	for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+		/* Format pmx and device name nicely */
+		char cdp[33];
+		int chars;
+
+		chars = snprintf(&cdp[0], 17, "%s", pmx_settings[i]->name);
+		while (chars < 16) {
+			cdp[chars] = ' ';
+			chars++;
+		}
+		chars = snprintf(&cdp[16], 17, "%s", pmx_settings[i]->dev ?
+				dev_name(pmx_settings[i]->dev) : "N/A");
+		while (chars < 16) {
+			cdp[chars+16] = ' ';
+			chars++;
+		}
+		cdp[32] = '\0';
+
+		seq_printf(s,
+			"%s\t%s\n",
+			&cdp[0],
+			pmx_settings[i]->activated ?
+			"ACTIVATED" : "DEACTIVATED"
+			);
+
+	}
+	mutex_unlock(&pmx_mutex);
+	return 0;
+}
+
+static int pmx_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, pmx_show, NULL);
+}
+
+static const struct file_operations pmx_operations = {
+	.owner		= THIS_MODULE,
+	.open		= pmx_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init init_pmx_read_debugfs(void)
+{
+	/* Expose a simple debugfs interface to view pmx settings */
+	(void) debugfs_create_file("padmux", S_IFREG | S_IRUGO,
+				   NULL, NULL,
+				   &pmx_operations);
+	return 0;
+}
+
+/*
+ * This needs to come in after the core_initcall(),
+ * because debugfs is not available until
+ * the subsystems come up.
+ */
+module_init(init_pmx_read_debugfs);
+#endif
+
+static int __init pmx_init(void)
+{
+	int ret;
+
+	ret = pmx_set_default();
+
+	if (IS_ERR_VALUE(ret))
+		pr_crit("padmux: default settings could not be set\n");
+
+	return 0;
+}
+
+/* Should be initialized before consumers */
+core_initcall(pmx_init);
diff --git a/arch/arm/mach-u300/padmux.h b/arch/arm/mach-u300/padmux.h
index 8c2099ac504..6e8b8606409 100644
--- a/arch/arm/mach-u300/padmux.h
+++ b/arch/arm/mach-u300/padmux.h
@@ -6,14 +6,34 @@
  * Copyright (C) 2009 ST-Ericsson AB
  * License terms: GNU General Public License (GPL) version 2
  * U300 PADMUX API
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- *
+ * Author: Martin Persson <martin.persson@stericsson.com>
  */
 
 #ifndef __MACH_U300_PADMUX_H
 #define __MACH_U300_PADMUX_H
 
-void pmx_set_mission_mode_mmc(void);
-void pmx_set_mission_mode_spi(void);
+enum pmx_settings {
+	U300_APP_PMX_MMC_SETTING,
+	U300_APP_PMX_SPI_SETTING
+};
+
+struct pmx_onmask {
+	u16 mask;		/* Mask bits */
+	u16 val;		/* Value when active */
+};
+
+struct pmx {
+	struct device *dev;
+	enum pmx_settings setting;
+	char *name;
+	bool activated;
+	bool default_on;
+	struct pmx_onmask onmask[];
+};
+
+struct pmx *pmx_get(struct device *dev, enum pmx_settings setting);
+int pmx_put(struct device *dev, struct pmx *pmx);
+int pmx_activate(struct device *dev, struct pmx *pmx);
+int pmx_deactivate(struct device *dev, struct pmx *pmx);
 
 #endif
-- 
cgit v1.2.3


From c7c8c78fdf6e9bd65d8ee879115dc2cd5d9fd0dc Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Fri, 14 Aug 2009 10:59:05 +0100
Subject: ARM: 5667/3: U300 SSP/SPI board setup and test

This adds a U300 board configuration for the PL022 SSP/SPI
PrimeCell driver recently merged to the 2.6.31-rc series.
Further it adds a dummy loopback SPI chip that can be used
for testing the SPI functionality on a running system using
the loopback mode of PL022.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-u300/Kconfig        |  12 ++
 arch/arm/mach-u300/Makefile       |   2 +
 arch/arm/mach-u300/core.c         |   6 +
 arch/arm/mach-u300/dummyspichip.c | 290 ++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-u300/spi.c          | 124 ++++++++++++++++
 arch/arm/mach-u300/spi.h          |  26 ++++
 6 files changed, 460 insertions(+)
 create mode 100644 arch/arm/mach-u300/dummyspichip.c
 create mode 100644 arch/arm/mach-u300/spi.c
 create mode 100644 arch/arm/mach-u300/spi.h

(limited to 'arch/arm')

diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
index 337b9aabce4..801b21e7f67 100644
--- a/arch/arm/mach-u300/Kconfig
+++ b/arch/arm/mach-u300/Kconfig
@@ -81,6 +81,18 @@ config MACH_U300_SEMI_IS_SHARED
 		Memory Interface) from both from access and application
 		side.
 
+config MACH_U300_SPIDUMMY
+	bool "SSP/SPI dummy chip"
+	select SPI
+	select SPI_MASTER
+	select SPI_PL022
+	help
+		This creates a small kernel module that creates a dummy
+		SPI device to be used for loopback tests. Regularly used
+		to test reference designs. If you're not testing SPI,
+		you don't need it. Selecting this will activate the
+		SPI framework and ARM PL022 support.
+
 comment "All the settings below must match the bootloader's settings"
 
 config MACH_U300_ACCESS_MEM_SIZE
diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile
index 24950e0df4b..4941f89ea79 100644
--- a/arch/arm/mach-u300/Makefile
+++ b/arch/arm/mach-u300/Makefile
@@ -9,3 +9,5 @@ obj-		:=
 
 obj-$(CONFIG_ARCH_U300)	          += u300.o
 obj-$(CONFIG_MMC)                 += mmc.o
+obj-$(CONFIG_SPI_PL022)           += spi.o
+obj-$(CONFIG_MACH_U300_SPIDUMMY)  += dummyspichip.o
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 89b3ccf35e1..38d08a1c25d 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -32,6 +32,7 @@
 
 #include "clock.h"
 #include "mmc.h"
+#include "spi.h"
 
 /*
  * Static I/O mappings that are needed for booting the U300 platforms. The
@@ -611,6 +612,8 @@ void __init u300_init_devices(void)
 	/* Wait for the PLL208 to lock if not locked in yet */
 	while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) &
 		 U300_SYSCON_CSR_PLL208_LOCK_IND));
+	/* Initialize SPI device with some board specifics */
+	u300_spi_init(&pl022_device);
 
 	/* Register the AMBA devices in the AMBA bus abstraction layer */
 	u300_clock_primecells();
@@ -622,6 +625,9 @@ void __init u300_init_devices(void)
 
 	u300_assign_physmem();
 
+	/* Register subdevices on the SPI bus */
+	u300_spi_register_board_devices();
+
 	/* Register the platform devices */
 	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
 
diff --git a/arch/arm/mach-u300/dummyspichip.c b/arch/arm/mach-u300/dummyspichip.c
new file mode 100644
index 00000000000..962f9de454d
--- /dev/null
+++ b/arch/arm/mach-u300/dummyspichip.c
@@ -0,0 +1,290 @@
+/*
+ * arch/arm/mach-u300/dummyspichip.c
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * This is a dummy loopback SPI "chip" used for testing SPI.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/sysfs.h>
+#include <linux/mutex.h>
+#include <linux/spi/spi.h>
+#include <linux/dma-mapping.h>
+/*
+ * WARNING! Do not include this pl022-specific controller header
+ * for any generic driver. It is only done in this dummy chip
+ * because we alter the chip configuration in order to test some
+ * different settings on the loopback device. Normal chip configs
+ * shall be STATIC and not altered by the driver!
+ */
+#include <linux/amba/pl022.h>
+
+struct dummy {
+	struct device *dev;
+	struct mutex lock;
+};
+
+#define DMA_TEST_SIZE 2048
+
+/* When we cat /sys/bus/spi/devices/spi0.0/looptest this will be triggered */
+static ssize_t dummy_looptest(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct dummy *p_dummy = dev_get_drvdata(&spi->dev);
+
+	/*
+	 * WARNING! Do not dereference the chip-specific data in any normal
+	 * driver for a chip. It is usually STATIC and shall not be read
+	 * or written to. Your chip driver should NOT depend on fields in this
+	 * struct, this is just used here to alter the behaviour of the chip
+	 * in order to perform tests.
+	 */
+	struct pl022_config_chip *chip_info = spi->controller_data;
+	int status;
+	u8 txbuf[14] = {0xDE, 0xAD, 0xBE, 0xEF, 0x2B, 0xAD,
+			0xCA, 0xFE, 0xBA, 0xBE, 0xB1, 0x05,
+			0xF0, 0x0D};
+	u8 rxbuf[14];
+	u8 *bigtxbuf_virtual;
+	u8 *bigrxbuf_virtual;
+
+	if (mutex_lock_interruptible(&p_dummy->lock))
+		return -ERESTARTSYS;
+
+	bigtxbuf_virtual = kmalloc(DMA_TEST_SIZE, GFP_KERNEL);
+	if (bigtxbuf_virtual == NULL) {
+		status = -ENOMEM;
+		goto out;
+	}
+	bigrxbuf_virtual = kmalloc(DMA_TEST_SIZE, GFP_KERNEL);
+
+	/* Fill TXBUF with some happy pattern */
+	memset(bigtxbuf_virtual, 0xAA, DMA_TEST_SIZE);
+
+	/*
+	 * Force chip to 8 bit mode
+	 * WARNING: NEVER DO THIS IN REAL DRIVER CODE, THIS SHOULD BE STATIC!
+	 */
+	chip_info->data_size = SSP_DATA_BITS_8;
+	/* You should NOT DO THIS EITHER */
+	spi->master->setup(spi);
+
+	/* Now run the tests for 8bit mode */
+	pr_info("Simple test 1: write 0xAA byte, read back garbage byte "
+		"in 8bit mode\n");
+	status = spi_w8r8(spi, 0xAA);
+	if (status < 0)
+		pr_warning("Siple test 1: FAILURE: spi_write_then_read "
+			   "failed with status %d\n", status);
+	else
+		pr_info("Simple test 1: SUCCESS!\n");
+
+	pr_info("Simple test 2: write 8 bytes, read back 8 bytes garbage "
+		"in 8bit mode (full FIFO)\n");
+	status = spi_write_then_read(spi, &txbuf[0], 8, &rxbuf[0], 8);
+	if (status < 0)
+		pr_warning("Simple test 2: FAILURE: spi_write_then_read() "
+			   "failed with status %d\n", status);
+	else
+		pr_info("Simple test 2: SUCCESS!\n");
+
+	pr_info("Simple test 3: write 14 bytes, read back 14 bytes garbage "
+		"in 8bit mode (see if we overflow FIFO)\n");
+	status = spi_write_then_read(spi, &txbuf[0], 14, &rxbuf[0], 14);
+	if (status < 0)
+		pr_warning("Simple test 3: FAILURE: failed with status %d "
+			   "(probably FIFO overrun)\n", status);
+	else
+		pr_info("Simple test 3: SUCCESS!\n");
+
+	pr_info("Simple test 4: write 8 bytes with spi_write(), read 8 "
+		"bytes garbage with spi_read() in 8bit mode\n");
+	status = spi_write(spi, &txbuf[0], 8);
+	if (status < 0)
+		pr_warning("Simple test 4 step 1: FAILURE: spi_write() "
+			   "failed with status %d\n", status);
+	else
+		pr_info("Simple test 4 step 1: SUCCESS!\n");
+	status = spi_read(spi, &rxbuf[0], 8);
+	if (status < 0)
+		pr_warning("Simple test 4 step 2: FAILURE: spi_read() "
+			   "failed with status %d\n", status);
+	else
+		pr_info("Simple test 4 step 2: SUCCESS!\n");
+
+	pr_info("Simple test 5: write 14 bytes with spi_write(), read "
+		"14 bytes garbage with spi_read() in 8bit mode\n");
+	status = spi_write(spi, &txbuf[0], 14);
+	if (status < 0)
+		pr_warning("Simple test 5 step 1: FAILURE: spi_write() "
+			   "failed with status %d (probably FIFO overrun)\n",
+			   status);
+	else
+		pr_info("Simple test 5 step 1: SUCCESS!\n");
+	status = spi_read(spi, &rxbuf[0], 14);
+	if (status < 0)
+		pr_warning("Simple test 5 step 2: FAILURE: spi_read() "
+			   "failed with status %d (probably FIFO overrun)\n",
+			   status);
+	else
+		pr_info("Simple test 5: SUCCESS!\n");
+
+	pr_info("Simple test 6: write %d bytes with spi_write(), "
+		"read %d bytes garbage with spi_read() in 8bit mode\n",
+		DMA_TEST_SIZE, DMA_TEST_SIZE);
+	status = spi_write(spi, &bigtxbuf_virtual[0], DMA_TEST_SIZE);
+	if (status < 0)
+		pr_warning("Simple test 6 step 1: FAILURE: spi_write() "
+			   "failed with status %d (probably FIFO overrun)\n",
+			   status);
+	else
+		pr_info("Simple test 6 step 1: SUCCESS!\n");
+	status = spi_read(spi, &bigrxbuf_virtual[0], DMA_TEST_SIZE);
+	if (status < 0)
+		pr_warning("Simple test 6 step 2: FAILURE: spi_read() "
+			   "failed with status %d (probably FIFO overrun)\n",
+			   status);
+	else
+		pr_info("Simple test 6: SUCCESS!\n");
+
+
+	/*
+	 * Force chip to 16 bit mode
+	 * WARNING: NEVER DO THIS IN REAL DRIVER CODE, THIS SHOULD BE STATIC!
+	 */
+	chip_info->data_size = SSP_DATA_BITS_16;
+	/* You should NOT DO THIS EITHER */
+	spi->master->setup(spi);
+
+	pr_info("Simple test 7: write 0xAA byte, read back garbage byte "
+		"in 16bit bus mode\n");
+	status = spi_w8r8(spi, 0xAA);
+	if (status == -EIO)
+		pr_info("Simple test 7: SUCCESS! (expected failure with "
+			"status EIO)\n");
+	else if (status < 0)
+		pr_warning("Siple test 7: FAILURE: spi_write_then_read "
+			   "failed with status %d\n", status);
+	else
+		pr_warning("Siple test 7: FAILURE: spi_write_then_read "
+			   "succeeded but it was expected to fail!\n");
+
+	pr_info("Simple test 8: write 8 bytes, read back 8 bytes garbage "
+		"in 16bit mode (full FIFO)\n");
+	status = spi_write_then_read(spi, &txbuf[0], 8, &rxbuf[0], 8);
+	if (status < 0)
+		pr_warning("Simple test 8: FAILURE: spi_write_then_read() "
+			   "failed with status %d\n", status);
+	else
+		pr_info("Simple test 8: SUCCESS!\n");
+
+	pr_info("Simple test 9: write 14 bytes, read back 14 bytes garbage "
+		"in 16bit mode (see if we overflow FIFO)\n");
+	status = spi_write_then_read(spi, &txbuf[0], 14, &rxbuf[0], 14);
+	if (status < 0)
+		pr_warning("Simple test 9: FAILURE: failed with status %d "
+			   "(probably FIFO overrun)\n", status);
+	else
+		pr_info("Simple test 9: SUCCESS!\n");
+
+	pr_info("Simple test 10: write %d bytes with spi_write(), "
+	       "read %d bytes garbage with spi_read() in 16bit mode\n",
+	       DMA_TEST_SIZE, DMA_TEST_SIZE);
+	status = spi_write(spi, &bigtxbuf_virtual[0], DMA_TEST_SIZE);
+	if (status < 0)
+		pr_warning("Simple test 10 step 1: FAILURE: spi_write() "
+			   "failed with status %d (probably FIFO overrun)\n",
+			   status);
+	else
+		pr_info("Simple test 10 step 1: SUCCESS!\n");
+
+	status = spi_read(spi, &bigrxbuf_virtual[0], DMA_TEST_SIZE);
+	if (status < 0)
+		pr_warning("Simple test 10 step 2: FAILURE: spi_read() "
+			   "failed with status %d (probably FIFO overrun)\n",
+			   status);
+	else
+		pr_info("Simple test 10: SUCCESS!\n");
+
+	status = sprintf(buf, "loop test complete\n");
+	kfree(bigrxbuf_virtual);
+	kfree(bigtxbuf_virtual);
+ out:
+	mutex_unlock(&p_dummy->lock);
+	return status;
+}
+
+static DEVICE_ATTR(looptest, S_IRUGO, dummy_looptest, NULL);
+
+static int __devinit pl022_dummy_probe(struct spi_device *spi)
+{
+	struct dummy *p_dummy;
+	int status;
+
+	dev_info(&spi->dev, "probing dummy SPI device\n");
+
+	p_dummy = kzalloc(sizeof *p_dummy, GFP_KERNEL);
+	if (!p_dummy)
+		return -ENOMEM;
+
+	dev_set_drvdata(&spi->dev, p_dummy);
+	mutex_init(&p_dummy->lock);
+
+	/* sysfs hook */
+	status = device_create_file(&spi->dev, &dev_attr_looptest);
+	if (status) {
+		dev_dbg(&spi->dev, "device_create_file looptest failure.\n");
+		goto out_dev_create_looptest_failed;
+	}
+
+	return 0;
+
+out_dev_create_looptest_failed:
+	dev_set_drvdata(&spi->dev, NULL);
+	kfree(p_dummy);
+	return status;
+}
+
+static int __devexit pl022_dummy_remove(struct spi_device *spi)
+{
+	struct dummy *p_dummy = dev_get_drvdata(&spi->dev);
+
+	dev_info(&spi->dev, "removing dummy SPI device\n");
+	device_remove_file(&spi->dev, &dev_attr_looptest);
+	dev_set_drvdata(&spi->dev, NULL);
+	kfree(p_dummy);
+
+	return 0;
+}
+
+static struct spi_driver pl022_dummy_driver = {
+	.driver = {
+		.name	= "spi-dummy",
+		.owner	= THIS_MODULE,
+	},
+	.probe	= pl022_dummy_probe,
+	.remove	= __devexit_p(pl022_dummy_remove),
+};
+
+static int __init pl022_init_dummy(void)
+{
+	return spi_register_driver(&pl022_dummy_driver);
+}
+
+static void __exit pl022_exit_dummy(void)
+{
+	spi_unregister_driver(&pl022_dummy_driver);
+}
+
+module_init(pl022_init_dummy);
+module_exit(pl022_exit_dummy);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
+MODULE_DESCRIPTION("PL022 SSP/SPI DUMMY Linux driver");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-u300/spi.c b/arch/arm/mach-u300/spi.c
new file mode 100644
index 00000000000..307d007ea7f
--- /dev/null
+++ b/arch/arm/mach-u300/spi.c
@@ -0,0 +1,124 @@
+/*
+ * arch/arm/mach-u300/spi.c
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/spi/spi.h>
+#include <linux/amba/pl022.h>
+#include <linux/err.h>
+#include "padmux.h"
+
+/*
+ * The following is for the actual devices on the SSP/SPI bus
+ */
+#ifdef CONFIG_MACH_U300_SPIDUMMY
+static void select_dummy_chip(u32 chipselect)
+{
+	pr_debug("CORE: %s called with CS=0x%x (%s)\n",
+		 __func__,
+		 chipselect,
+		 chipselect ? "unselect chip" : "select chip");
+	/*
+	 * Here you would write the chip select value to the GPIO pins if
+	 * this was a real chip (but this is a loopback dummy).
+	 */
+}
+
+struct pl022_config_chip dummy_chip_info = {
+	/* Nominally this is LOOPBACK_DISABLED, but this is our dummy chip! */
+	.lbm = LOOPBACK_ENABLED,
+	/*
+	 * available POLLING_TRANSFER and INTERRUPT_TRANSFER,
+	 * DMA_TRANSFER does not work
+	 */
+	.com_mode = INTERRUPT_TRANSFER,
+	.iface = SSP_INTERFACE_MOTOROLA_SPI,
+	/* We can only act as master but SSP_SLAVE is possible in theory */
+	.hierarchy = SSP_MASTER,
+	/* 0 = drive TX even as slave, 1 = do not drive TX as slave */
+	.slave_tx_disable = 0,
+	/* LSB first */
+	.endian_tx = SSP_TX_LSB,
+	.endian_rx = SSP_RX_LSB,
+	.data_size = SSP_DATA_BITS_8, /* used to be 12 in some default */
+	.rx_lev_trig = SSP_RX_1_OR_MORE_ELEM,
+	.tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC,
+	.clk_phase = SSP_CLK_FALLING_EDGE,
+	.clk_pol = SSP_CLK_POL_IDLE_LOW,
+	.ctrl_len = SSP_BITS_12,
+	.wait_state = SSP_MWIRE_WAIT_ZERO,
+	.duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX,
+	/*
+	 * This is where you insert a call to a function to enable CS
+	 * (usually GPIO) for a certain chip.
+	 */
+	.cs_control = select_dummy_chip,
+};
+#endif
+
+static struct spi_board_info u300_spi_devices[] = {
+#ifdef CONFIG_MACH_U300_SPIDUMMY
+	{
+		/* A dummy chip used for loopback tests */
+		.modalias       = "spi-dummy",
+		/* Really dummy, pass in additional chip config here */
+		.platform_data  = NULL,
+		/* This defines how the controller shall handle the device */
+		.controller_data = &dummy_chip_info,
+		/* .irq - no external IRQ routed from this device */
+		.max_speed_hz   = 1000000,
+		.bus_num        = 0, /* Only one bus on this chip */
+		.chip_select    = 0,
+		/* Means SPI_CS_HIGH, change if e.g low CS */
+		.mode           = 0,
+	},
+#endif
+};
+
+static struct pl022_ssp_controller ssp_platform_data = {
+	/* If you have several SPI buses this varies, we have only bus 0 */
+	.bus_id = 0,
+	/* Set this to 1 when we think we got DMA working */
+	.enable_dma = 0,
+	/*
+	 * On the APP CPU GPIO 4, 5 and 6 are connected as generic
+	 * chip selects for SPI. (Same on U330, U335 and U365.)
+	 * TODO: make sure the GPIO driver can select these properly
+	 * and do padmuxing accordingly too.
+	 */
+	.num_chipselect = 3,
+};
+
+
+void __init u300_spi_init(struct amba_device *adev)
+{
+	struct pmx *pmx;
+
+	adev->dev.platform_data = &ssp_platform_data;
+	/*
+	 * Setup padmuxing for SPI. Since this must always be
+	 * compiled into the kernel, pmx is never released.
+	 */
+	pmx = pmx_get(&adev->dev, U300_APP_PMX_SPI_SETTING);
+
+	if (IS_ERR(pmx))
+		dev_warn(&adev->dev, "Could not get padmux handle\n");
+	else {
+		int ret;
+
+		ret = pmx_activate(&adev->dev, pmx);
+		if (IS_ERR_VALUE(ret))
+			dev_warn(&adev->dev, "Could not activate padmuxing\n");
+	}
+
+}
+void __init u300_spi_register_board_devices(void)
+{
+	/* Register any SPI devices */
+	spi_register_board_info(u300_spi_devices, ARRAY_SIZE(u300_spi_devices));
+}
diff --git a/arch/arm/mach-u300/spi.h b/arch/arm/mach-u300/spi.h
new file mode 100644
index 00000000000..bd3d867e240
--- /dev/null
+++ b/arch/arm/mach-u300/spi.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-u300/spi.h
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#ifndef SPI_H
+#define SPI_H
+#include <linux/amba/bus.h>
+
+#ifdef CONFIG_SPI_PL022
+void __init u300_spi_init(struct amba_device *adev);
+void __init u300_spi_register_board_devices(void);
+#else
+/* Compile out SPI support if PL022 is not selected */
+static inline void __init u300_spi_init(struct amba_device *adev)
+{
+}
+static inline void __init u300_spi_register_board_devices(void)
+{
+}
+#endif
+
+#endif
-- 
cgit v1.2.3


From 6be2a0cacc1ed6899a53172e2e9b7a3587be0bea Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Thu, 13 Aug 2009 21:42:01 +0100
Subject: ARM: 5668/2: U300 I2C board setup

This sets up the U300 I2C subdevices so that the AB3100
analog baseband ASIC is properly detected and also the
camera devices in the U335 reference design get properly
registered.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-u300/Makefile |  1 +
 arch/arm/mach-u300/core.c   |  8 ++++++--
 arch/arm/mach-u300/i2c.c    | 43 +++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-u300/i2c.h    | 23 +++++++++++++++++++++++
 4 files changed, 73 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/mach-u300/i2c.c
 create mode 100644 arch/arm/mach-u300/i2c.h

(limited to 'arch/arm')

diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile
index 4941f89ea79..885b5c027c1 100644
--- a/arch/arm/mach-u300/Makefile
+++ b/arch/arm/mach-u300/Makefile
@@ -11,3 +11,4 @@ obj-$(CONFIG_ARCH_U300)	          += u300.o
 obj-$(CONFIG_MMC)                 += mmc.o
 obj-$(CONFIG_SPI_PL022)           += spi.o
 obj-$(CONFIG_MACH_U300_SPIDUMMY)  += dummyspichip.o
+obj-$(CONFIG_I2C_STU300)          += i2c.o
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 38d08a1c25d..bad1ba228cb 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -33,6 +33,7 @@
 #include "clock.h"
 #include "mmc.h"
 #include "spi.h"
+#include "i2c.h"
 
 /*
  * Static I/O mappings that are needed for booting the U300 platforms. The
@@ -379,14 +380,14 @@ static struct platform_device wdog_device = {
 };
 
 static struct platform_device i2c0_device = {
-	.name = "stddci2c",
+	.name = "stu300",
 	.id = 0,
 	.num_resources = ARRAY_SIZE(i2c0_resources),
 	.resource = i2c0_resources,
 };
 
 static struct platform_device i2c1_device = {
-	.name = "stddci2c",
+	.name = "stu300",
 	.id = 1,
 	.num_resources = ARRAY_SIZE(i2c1_resources),
 	.resource = i2c1_resources,
@@ -625,6 +626,9 @@ void __init u300_init_devices(void)
 
 	u300_assign_physmem();
 
+	/* Register subdevices on the I2C buses */
+	u300_i2c_register_board_devices();
+
 	/* Register subdevices on the SPI bus */
 	u300_spi_register_board_devices();
 
diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c
new file mode 100644
index 00000000000..10be1f888b2
--- /dev/null
+++ b/arch/arm/mach-u300/i2c.c
@@ -0,0 +1,43 @@
+/*
+ * arch/arm/mach-u300/i2c.c
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Register board i2c devices
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <mach/irqs.h>
+
+static struct i2c_board_info __initdata bus0_i2c_board_info[] = {
+	{
+		.type = "ab3100",
+		.addr = 0x48,
+		.irq = IRQ_U300_IRQ0_EXT,
+	},
+};
+
+static struct i2c_board_info __initdata bus1_i2c_board_info[] = {
+#ifdef CONFIG_MACH_U300_BS335
+	{
+		.type = "fwcam",
+		.addr = 0x10,
+	},
+	{
+		.type = "fwcam",
+		.addr = 0x5d,
+	},
+#else
+	{ },
+#endif
+};
+
+void __init u300_i2c_register_board_devices(void)
+{
+	i2c_register_board_info(0, bus0_i2c_board_info,
+				ARRAY_SIZE(bus0_i2c_board_info));
+	i2c_register_board_info(1, bus1_i2c_board_info,
+				ARRAY_SIZE(bus1_i2c_board_info));
+}
diff --git a/arch/arm/mach-u300/i2c.h b/arch/arm/mach-u300/i2c.h
new file mode 100644
index 00000000000..485c02e5c06
--- /dev/null
+++ b/arch/arm/mach-u300/i2c.h
@@ -0,0 +1,23 @@
+/*
+ * arch/arm/mach-u300/i2c.h
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Register board i2c devices
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#ifndef MACH_U300_I2C_H
+#define MACH_U300_I2C_H
+
+#ifdef CONFIG_I2C_STU300
+void __init u300_i2c_register_board_devices(void);
+#else
+/* Compile out this stuff if no I2C adapter is available */
+static inline void __init u300_i2c_register_board_devices(void)
+{
+}
+#endif
+
+#endif
-- 
cgit v1.2.3


From 58b5369e6eb6c889b540a99aa95562a66b25acf1 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Fri, 14 Aug 2009 15:36:44 +0100
Subject: ARM: 5674/1: Add clocksource/clockevent support for w90p910 platform

Add clocksource/clockevent support for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig                |   2 +
 arch/arm/mach-w90x900/clock.c   |   6 ++
 arch/arm/mach-w90x900/time.c    | 151 +++++++++++++++++++++++++++++++++-------
 arch/arm/mach-w90x900/w90p910.c |   2 +
 4 files changed, 137 insertions(+), 24 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c3fed1ee730..8c4f03d3412 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -495,6 +495,8 @@ config ARCH_W90X900
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select COMMON_CLKDEV
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
 	help
 		Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
 		can login www.mcuos.com or www.nuvoton.com to know more.
diff --git a/arch/arm/mach-w90x900/clock.c b/arch/arm/mach-w90x900/clock.c
index 49cf1fbc14e..70b67109637 100644
--- a/arch/arm/mach-w90x900/clock.c
+++ b/arch/arm/mach-w90x900/clock.c
@@ -55,6 +55,12 @@ void clk_disable(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_disable);
 
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return 15000000;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
 void w90x900_clk_enable(struct clk *clk, int enable)
 {
 	unsigned int clocks = clk->cken;
diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c
index bcc838f6b39..5e06770e601 100644
--- a/arch/arm/mach-w90x900/time.c
+++ b/arch/arm/mach-w90x900/time.c
@@ -3,7 +3,7 @@
  *
  * Based on linux/arch/arm/plat-s3c24xx/time.c by Ben Dooks
  *
- * Copyright (c) 2008 Nuvoton technology corporation
+ * Copyright (c) 2009 Nuvoton technology corporation
  * All rights reserved.
  *
  * Wan ZongShun <mcuos.com@gmail.com>
@@ -23,6 +23,8 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/leds.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/irq.h>
@@ -31,49 +33,150 @@
 #include <mach/map.h>
 #include <mach/regs-timer.h>
 
-static unsigned long w90x900_gettimeoffset(void)
+#define RESETINT	0x1f
+#define PERIOD		(0x01 << 27)
+#define ONESHOT		(0x00 << 27)
+#define COUNTEN		(0x01 << 30)
+#define INTEN		(0x01 << 29)
+
+#define TICKS_PER_SEC	100
+#define PRESCALE	0x63 /* Divider = prescale + 1 */
+
+unsigned int timer0_load;
+
+static void w90p910_clockevent_setmode(enum clock_event_mode mode,
+		struct clock_event_device *clk)
 {
+	unsigned int val;
+
+	val = __raw_readl(REG_TCSR0);
+	val &= ~(0x03 << 27);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		__raw_writel(timer0_load, REG_TICR0);
+		val |= (PERIOD | COUNTEN | INTEN | PRESCALE);
+		break;
+
+	case CLOCK_EVT_MODE_ONESHOT:
+		val |= (ONESHOT | COUNTEN | INTEN | PRESCALE);
+		break;
+
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_RESUME:
+		break;
+	}
+
+	__raw_writel(val, REG_TCSR0);
+}
+
+static int w90p910_clockevent_setnextevent(unsigned long evt,
+		struct clock_event_device *clk)
+{
+	unsigned int val;
+
+	__raw_writel(evt, REG_TICR0);
+
+	val = __raw_readl(REG_TCSR0);
+	val |= (COUNTEN | INTEN | PRESCALE);
+	__raw_writel(val, REG_TCSR0);
+
 	return 0;
 }
 
+static struct clock_event_device w90p910_clockevent_device = {
+	.name		= "w90p910-timer0",
+	.shift		= 32,
+	.features	= CLOCK_EVT_MODE_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_mode	= w90p910_clockevent_setmode,
+	.set_next_event	= w90p910_clockevent_setnextevent,
+	.rating		= 300,
+};
+
 /*IRQ handler for the timer*/
 
-static irqreturn_t
-w90x900_timer_interrupt(int irq, void *dev_id)
+static irqreturn_t w90p910_timer0_interrupt(int irq, void *dev_id)
 {
-	timer_tick();
+	struct clock_event_device *evt = &w90p910_clockevent_device;
+
 	__raw_writel(0x01, REG_TISR); /* clear TIF0 */
+
+	evt->event_handler(evt);
 	return IRQ_HANDLED;
 }
 
-static struct irqaction w90x900_timer_irq = {
-	.name		= "w90x900 Timer Tick",
+static struct irqaction w90p910_timer0_irq = {
+	.name		= "w90p910-timer0",
 	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= w90x900_timer_interrupt,
+	.handler	= w90p910_timer0_interrupt,
 };
 
-/*Set up timer reg.*/
+static void __init w90p910_clockevents_init(unsigned int rate)
+{
+	w90p910_clockevent_device.mult = div_sc(rate, NSEC_PER_SEC,
+					w90p910_clockevent_device.shift);
+	w90p910_clockevent_device.max_delta_ns = clockevent_delta2ns(0xffffffff,
+					&w90p910_clockevent_device);
+	w90p910_clockevent_device.min_delta_ns = clockevent_delta2ns(0xf,
+					&w90p910_clockevent_device);
+	w90p910_clockevent_device.cpumask = cpumask_of(0);
 
-static void w90x900_timer_setup(void)
+	clockevents_register_device(&w90p910_clockevent_device);
+}
+
+static cycle_t w90p910_get_cycles(struct clocksource *cs)
 {
-	__raw_writel(0, REG_TCSR0);
-	__raw_writel(0, REG_TCSR1);
-	__raw_writel(0, REG_TCSR2);
-	__raw_writel(0, REG_TCSR3);
-	__raw_writel(0, REG_TCSR4);
-	__raw_writel(0x1F, REG_TISR);
-	__raw_writel(15000000/(100 * 100), REG_TICR0);
-	__raw_writel(0x68000063, REG_TCSR0);
+	return ~__raw_readl(REG_TDR1);
 }
 
-static void __init w90x900_timer_init(void)
+static struct clocksource clocksource_w90p910 = {
+	.name	= "w90p910-timer1",
+	.rating	= 200,
+	.read	= w90p910_get_cycles,
+	.mask	= CLOCKSOURCE_MASK(32),
+	.shift	= 20,
+	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void __init w90p910_clocksource_init(unsigned int rate)
 {
-	w90x900_timer_setup();
-	setup_irq(IRQ_TIMER0, &w90x900_timer_irq);
+	unsigned int val;
+
+	__raw_writel(0xffffffff, REG_TICR1);
+
+	val = __raw_readl(REG_TCSR1);
+	val |= (COUNTEN | PERIOD);
+	__raw_writel(val, REG_TCSR1);
+
+	clocksource_w90p910.mult =
+		clocksource_khz2mult((rate / 1000), clocksource_w90p910.shift);
+	clocksource_register(&clocksource_w90p910);
+}
+
+static void __init w90p910_timer_init(void)
+{
+	struct clk *ck_ext = clk_get(NULL, "ext");
+	unsigned int	rate;
+
+	BUG_ON(IS_ERR(ck_ext));
+
+	rate = clk_get_rate(ck_ext);
+	clk_put(ck_ext);
+	rate = rate / (PRESCALE + 0x01);
+
+	 /* set a known state */
+	__raw_writel(0x00, REG_TCSR0);
+	__raw_writel(0x00, REG_TCSR1);
+	__raw_writel(RESETINT, REG_TISR);
+	timer0_load = (rate / TICKS_PER_SEC);
+
+	setup_irq(IRQ_TIMER0, &w90p910_timer0_irq);
+
+	w90p910_clocksource_init(rate);
+	w90p910_clockevents_init(rate);
 }
 
 struct sys_timer w90x900_timer = {
-	.init		= w90x900_timer_init,
-	.offset		= w90x900_gettimeoffset,
-	.resume		= w90x900_timer_setup
+	.init		= w90p910_timer_init,
 };
diff --git a/arch/arm/mach-w90x900/w90p910.c b/arch/arm/mach-w90x900/w90p910.c
index 8444eababaa..d33723b69d1 100644
--- a/arch/arm/mach-w90x900/w90p910.c
+++ b/arch/arm/mach-w90x900/w90p910.c
@@ -76,6 +76,7 @@ static DEFINE_CLK(wdt, 26);
 static DEFINE_CLK(gdma, 27);
 static DEFINE_CLK(adc, 28);
 static DEFINE_CLK(usi, 29);
+static DEFINE_CLK(ext, 0);
 
 static struct clk_lookup w90p910_clkregs[] = {
 	DEF_CLKLOOK(&clk_lcd, "w90p910-lcd", NULL),
@@ -97,6 +98,7 @@ static struct clk_lookup w90p910_clkregs[] = {
 	DEF_CLKLOOK(&clk_gdma, "w90p910-gdma", NULL),
 	DEF_CLKLOOK(&clk_adc, "w90p910-adc", NULL),
 	DEF_CLKLOOK(&clk_usi, "w90p910-spi", NULL),
+	DEF_CLKLOOK(&clk_ext, NULL, "ext"),
 };
 
 /* Initial serial platform data */
-- 
cgit v1.2.3


From f346becf2fdba4d9dc023d28bc9a28f74dc9e4ac Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Fri, 14 Aug 2009 15:37:42 +0100
Subject: ARM: 5675/1: The semaphore is used as mutex so make it a mutex
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The semaphore is used as mutex so make it a mutex.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/mfp-w90p910.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-w90x900/mfp-w90p910.c b/arch/arm/mach-w90x900/mfp-w90p910.c
index e11a32b6856..4533098a0ee 100644
--- a/arch/arm/mach-w90x900/mfp-w90p910.c
+++ b/arch/arm/mach-w90x900/mfp-w90p910.c
@@ -40,7 +40,7 @@
 #define ENI2C0		(0x01 << 14)
 #define ENI2C1		(0x01 << 16)
 
-static DECLARE_MUTEX(mfp_sem);
+static DEFINE_MUTEX(mfp_mutex);
 
 void mfp_set_groupf(struct device *dev)
 {
@@ -49,7 +49,7 @@ void mfp_set_groupf(struct device *dev)
 
 	BUG_ON(!dev);
 
-	down(&mfp_sem);
+	mutex_lock(&mfp_mutex);
 
 	dev_id = dev_name(dev);
 
@@ -62,7 +62,7 @@ void mfp_set_groupf(struct device *dev)
 
 	__raw_writel(mfpen, REG_MFSEL);
 
-	up(&mfp_sem);
+	mutex_unlock(&mfp_mutex);
 }
 EXPORT_SYMBOL(mfp_set_groupf);
 
@@ -73,7 +73,7 @@ void mfp_set_groupc(struct device *dev)
 
 	BUG_ON(!dev);
 
-	down(&mfp_sem);
+	mutex_lock(&mfp_mutex);
 
 	dev_id = dev_name(dev);
 
@@ -92,7 +92,7 @@ void mfp_set_groupc(struct device *dev)
 
 	__raw_writel(mfpen, REG_MFSEL);
 
-	up(&mfp_sem);
+	mutex_unlock(&mfp_mutex);
 }
 EXPORT_SYMBOL(mfp_set_groupc);
 
@@ -103,7 +103,7 @@ void mfp_set_groupi(struct device *dev)
 
 	BUG_ON(!dev);
 
-	down(&mfp_sem);
+	mutex_lock(&mfp_mutex);
 
 	dev_id = dev_name(dev);
 
@@ -120,7 +120,7 @@ void mfp_set_groupi(struct device *dev)
 
 	__raw_writel(mfpen, REG_MFSEL);
 
-	up(&mfp_sem);
+	mutex_unlock(&mfp_mutex);
 }
 EXPORT_SYMBOL(mfp_set_groupi);
 
@@ -131,7 +131,7 @@ void mfp_set_groupg(struct device *dev)
 
 	BUG_ON(!dev);
 
-	down(&mfp_sem);
+	mutex_lock(&mfp_mutex);
 
 	dev_id = dev_name(dev);
 
@@ -152,7 +152,7 @@ void mfp_set_groupg(struct device *dev)
 
 	__raw_writel(mfpen, REG_MFSEL);
 
-	up(&mfp_sem);
+	mutex_unlock(&mfp_mutex);
 }
 EXPORT_SYMBOL(mfp_set_groupg);
 
-- 
cgit v1.2.3


From a8bc4eadd936bbad9e99b89fe692679451ad75c9 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Fri, 14 Aug 2009 15:38:29 +0100
Subject: ARM: 5676/1: Provide more useful introduction for w90x900

Provide more useful introduction for w90x900

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 8c4f03d3412..aad0add99a5 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -498,8 +498,13 @@ config ARCH_W90X900
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	help
-		Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
-		can login www.mcuos.com or www.nuvoton.com to know more.
+	  Support for Nuvoton (Winbond logic dept.) ARM9 processor,
+	  At present, the w90x900 has been renamed nuc900, regarding
+	  the ARM series product line, you can login the following
+	  link address to know more.
+
+	  <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
+		ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>
 
 config ARCH_PNX4008
 	bool "Philips Nexperia PNX4008 Mobile"
-- 
cgit v1.2.3


From 4663712cc745324a216112a72c744bb2b8f6658b Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 19:56:19 +0100
Subject: ARM: 5643/1: bcmring: arch.c and header files

add arch.c in mach-bcmring
add related header files in mach-bcmring

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/arch.c                       | 157 +++++++++++++++++++++
 arch/arm/mach-bcmring/core.h                       |  30 ++++
 arch/arm/mach-bcmring/include/cfg_global.h         |  13 ++
 arch/arm/mach-bcmring/include/cfg_global_defines.h |  40 ++++++
 arch/arm/mach-bcmring/include/mach/hardware.h      |  60 ++++++++
 arch/arm/mach-bcmring/include/mach/system.h        |  54 +++++++
 6 files changed, 354 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/arch.c
 create mode 100644 arch/arm/mach-bcmring/core.h
 create mode 100644 arch/arm/mach-bcmring/include/cfg_global.h
 create mode 100644 arch/arm/mach-bcmring/include/cfg_global_defines.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/hardware.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/system.h

(limited to 'arch/arm')

diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c
new file mode 100644
index 00000000000..0da693b0f7e
--- /dev/null
+++ b/arch/arm/mach-bcmring/arch.c
@@ -0,0 +1,157 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+
+#include <linux/proc_fs.h>
+#include <linux/sysctl.h>
+
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/time.h>
+
+#include <asm/mach/arch.h>
+#include <mach/dma.h>
+#include <mach/hardware.h>
+#include <mach/csp/mm_io.h>
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+
+#include <cfg_global.h>
+
+#include "core.h"
+
+HW_DECLARE_SPINLOCK(arch)
+HW_DECLARE_SPINLOCK(gpio)
+#if defined(CONFIG_DEBUG_SPINLOCK)
+    EXPORT_SYMBOL(bcmring_gpio_reg_lock);
+#endif
+
+/* FIXME: temporary solution */
+#define BCM_SYSCTL_REBOOT_WARM               1
+#define CTL_BCM_REBOOT                 112
+
+/* sysctl */
+int bcmring_arch_warm_reboot;	/* do a warm reboot on hard reset */
+
+static struct ctl_table_header *bcmring_sysctl_header;
+
+static struct ctl_table bcmring_sysctl_warm_reboot[] = {
+	{
+	 .ctl_name = BCM_SYSCTL_REBOOT_WARM,
+	 .procname = "warm",
+	 .data = &bcmring_arch_warm_reboot,
+	 .maxlen = sizeof(int),
+	 .mode = 0644,
+	 .proc_handler = &proc_dointvec},
+	{}
+};
+
+static struct ctl_table bcmring_sysctl_reboot[] = {
+	{
+	 .ctl_name = CTL_BCM_REBOOT,
+	 .procname = "reboot",
+	 .mode = 0555,
+	 .child = bcmring_sysctl_warm_reboot},
+	{}
+};
+
+static struct platform_device nand_device = {
+	.name = "bcm-nand",
+	.id = -1,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&nand_device,
+};
+
+/****************************************************************************
+*
+*   Called from the customize_machine function in arch/arm/kernel/setup.c
+*
+*   The customize_machine function is tagged as an arch_initcall
+*   (see include/linux/init.h for the order that the various init sections
+*   are called in.
+*
+*****************************************************************************/
+static void __init bcmring_init_machine(void)
+{
+
+	bcmring_sysctl_header = register_sysctl_table(bcmring_sysctl_reboot);
+
+	/* Enable spread spectrum */
+	chipcHw_enableSpreadSpectrum();
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	bcmring_amba_init();
+
+	dma_init();
+}
+
+/****************************************************************************
+*
+*   Called from setup_arch (in arch/arm/kernel/setup.c) to fixup any tags
+*   passed in by the boot loader.
+*
+*****************************************************************************/
+
+static void __init bcmring_fixup(struct machine_desc *desc,
+     struct tag *t, char **cmdline, struct meminfo *mi) {
+#ifdef CONFIG_BLK_DEV_INITRD
+	printk(KERN_NOTICE "bcmring_fixup\n");
+	t->hdr.tag = ATAG_CORE;
+	t->hdr.size = tag_size(tag_core);
+	t->u.core.flags = 0;
+	t->u.core.pagesize = PAGE_SIZE;
+	t->u.core.rootdev = 31 << 8 | 0;
+	t = tag_next(t);
+
+	t->hdr.tag = ATAG_MEM;
+	t->hdr.size = tag_size(tag_mem32);
+	t->u.mem.start = CFG_GLOBAL_RAM_BASE;
+	t->u.mem.size = CFG_GLOBAL_RAM_SIZE;
+
+	t = tag_next(t);
+
+	t->hdr.tag = ATAG_NONE;
+	t->hdr.size = 0;
+#endif
+}
+
+/****************************************************************************
+*
+*   Machine Description
+*
+*****************************************************************************/
+
+MACHINE_START(BCMRING, "BCMRING")
+	/* Maintainer: Broadcom Corporation */
+	.phys_io = MM_IO_START,
+	.io_pg_offst = (MM_IO_BASE >> 18) & 0xfffc,
+	.fixup = bcmring_fixup,
+	.map_io = bcmring_map_io,
+	.init_irq = bcmring_init_irq,
+	.timer = &bcmring_timer,
+	.init_machine = bcmring_init_machine
+MACHINE_END
diff --git a/arch/arm/mach-bcmring/core.h b/arch/arm/mach-bcmring/core.h
new file mode 100644
index 00000000000..b197ba48e36
--- /dev/null
+++ b/arch/arm/mach-bcmring/core.h
@@ -0,0 +1,30 @@
+/*
+ *  linux/arch/arm/mach-versatile/core.h
+ *
+ *  Copyright (C) 2004 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+/* Portions copyright Broadcom 2008 */
+#ifndef __ASM_ARCH_BCMRING_H
+#define __ASM_ARCH_BCMRING_H
+
+void __init bcmring_amba_init(void);
+void __init bcmring_map_io(void);
+void __init bcmring_init_irq(void);
+
+extern struct sys_timer bcmring_timer;
+#endif
diff --git a/arch/arm/mach-bcmring/include/cfg_global.h b/arch/arm/mach-bcmring/include/cfg_global.h
new file mode 100644
index 00000000000..f01da877148
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/cfg_global.h
@@ -0,0 +1,13 @@
+#ifndef _CFG_GLOBAL_H_
+#define _CFG_GLOBAL_H_
+
+#include <cfg_global_defines.h>
+
+#define CFG_GLOBAL_CHIP                         BCM11107
+#define CFG_GLOBAL_CHIP_FAMILY                  CFG_GLOBAL_CHIP_FAMILY_BCMRING
+#define CFG_GLOBAL_CHIP_REV                     0xB0
+#define CFG_GLOBAL_RAM_SIZE                     0x10000000
+#define CFG_GLOBAL_RAM_BASE                     0x00000000
+#define CFG_GLOBAL_RAM_RESERVED_SIZE            0x000000
+
+#endif /* _CFG_GLOBAL_H_ */
diff --git a/arch/arm/mach-bcmring/include/cfg_global_defines.h b/arch/arm/mach-bcmring/include/cfg_global_defines.h
new file mode 100644
index 00000000000..b5beb0b3073
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/cfg_global_defines.h
@@ -0,0 +1,40 @@
+/*****************************************************************************
+* Copyright 2006 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CFG_GLOBAL_DEFINES_H
+#define CFG_GLOBAL_DEFINES_H
+
+/* CHIP */
+#define BCM1103 1
+
+#define BCM1191 4
+#define BCM2153 5
+#define BCM2820 6
+
+#define BCM2826 8
+#define FPGA11107 9
+#define BCM11107   10
+#define BCM11109   11
+#define BCM11170   12
+#define BCM11110   13
+#define BCM11211   14
+
+/* CFG_GLOBAL_CHIP_FAMILY types */
+#define CFG_GLOBAL_CHIP_FAMILY_NONE        0
+#define CFG_GLOBAL_CHIP_FAMILY_BCM116X     2
+#define CFG_GLOBAL_CHIP_FAMILY_BCMRING     4
+#define CFG_GLOBAL_CHIP_FAMILY_BCM1103     8
+
+#define IMAGE_HEADER_SIZE_CHECKSUM    4
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/hardware.h b/arch/arm/mach-bcmring/include/mach/hardware.h
new file mode 100644
index 00000000000..447eb340c61
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/hardware.h
@@ -0,0 +1,60 @@
+/*
+ *
+ *  This file contains the hardware definitions of the BCMRing.
+ *
+ *  Copyright (C) 1999 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/memory.h>
+#include <cfg_global.h>
+#include <mach/csp/mm_io.h>
+
+/* Hardware addresses of major areas.
+ *  *_START is the physical address
+ *  *_SIZE  is the size of the region
+ *  *_BASE  is the virtual address
+ */
+#define RAM_START               PHYS_OFFSET
+
+#define RAM_SIZE                (CFG_GLOBAL_RAM_SIZE-CFG_GLOBAL_RAM_SIZE_RESERVED)
+#define RAM_BASE                PAGE_OFFSET
+
+#define pcibios_assign_all_busses()	1
+
+/* Macros to make managing spinlocks a bit more controlled in terms of naming. */
+/* See reg_gpio.h, reg_irq.h, arch.c, gpio.c for example usage. */
+#if defined(__KERNEL__)
+#define HW_DECLARE_SPINLOCK(name)  DEFINE_SPINLOCK(bcmring_##name##_reg_lock);
+#define HW_EXTERN_SPINLOCK(name)   extern spinlock_t bcmring_##name##_reg_lock;
+#define HW_IRQ_SAVE(name, val)     spin_lock_irqsave(&bcmring_##name##_reg_lock, (val))
+#define HW_IRQ_RESTORE(name, val)  spin_unlock_irqrestore(&bcmring_##name##_reg_lock, (val))
+#else
+#define HW_DECLARE_SPINLOCK(name)
+#define HW_EXTERN_SPINLOCK(name)
+#define HW_IRQ_SAVE(name, val)     {(void)(name); (void)(val); }
+#define HW_IRQ_RESTORE(name, val)  {(void)(name); (void)(val); }
+#endif
+
+#ifndef HW_IO_PHYS_TO_VIRT
+#define HW_IO_PHYS_TO_VIRT MM_IO_PHYS_TO_VIRT
+#endif
+#define HW_IO_VIRT_TO_PHYS MM_IO_VIRT_TO_PHYS
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/system.h b/arch/arm/mach-bcmring/include/mach/system.h
new file mode 100644
index 00000000000..cdbf93c694a
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/system.h
@@ -0,0 +1,54 @@
+/*
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/csp/chipcHw_inline.h>
+
+extern int bcmring_arch_warm_reboot;
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, char *cmd)
+{
+	printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot);
+
+	if (mode == 'h') {
+		/* Reboot configured in proc entry */
+		if (bcmring_arch_warm_reboot) {
+			printk("warm reset\n");
+			/* Issue Warm reset (do not reset ethernet switch, keep alive) */
+			chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_WARM);
+		} else {
+			/* Force reset of everything */
+			printk("force reset\n");
+			chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
+		}
+	} else {
+		/* Force reset of everything */
+		printk("force reset\n");
+		chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
+	}
+}
+
+#endif
-- 
cgit v1.2.3


From 278a6752e869b0f4a03ce5ac0588b31b50712903 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 19:58:26 +0100
Subject: ARM: 5644/1: add bcmring core.c, clock.c, clock.h

add core.c, clock.c, and clock.h in mach-bcmring

implement timer init, clocksource init, amba device init
implement clock set/get enable/disable API
add dummy clkdev.h

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/clock.c               | 224 +++++++++++++++++
 arch/arm/mach-bcmring/clock.h               |  33 +++
 arch/arm/mach-bcmring/core.c                | 367 ++++++++++++++++++++++++++++
 arch/arm/mach-bcmring/include/mach/clkdev.h |   7 +
 4 files changed, 631 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/clock.c
 create mode 100644 arch/arm/mach-bcmring/clock.h
 create mode 100644 arch/arm/mach-bcmring/core.c
 create mode 100644 arch/arm/mach-bcmring/include/mach/clkdev.h

(limited to 'arch/arm')

diff --git a/arch/arm/mach-bcmring/clock.c b/arch/arm/mach-bcmring/clock.c
new file mode 100644
index 00000000000..14bafc38f2d
--- /dev/null
+++ b/arch/arm/mach-bcmring/clock.c
@@ -0,0 +1,224 @@
+/*****************************************************************************
+* Copyright 2001 - 2009 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+#include <mach/csp/hw_cfg.h>
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_reg.h>
+#include <mach/csp/chipcHw_inline.h>
+
+#include <asm/clkdev.h>
+
+#include "clock.h"
+
+#define clk_is_primary(x)       ((x)->type & CLK_TYPE_PRIMARY)
+#define clk_is_pll1(x)          ((x)->type & CLK_TYPE_PLL1)
+#define clk_is_pll2(x)          ((x)->type & CLK_TYPE_PLL2)
+#define clk_is_programmable(x)  ((x)->type & CLK_TYPE_PROGRAMMABLE)
+#define clk_is_bypassable(x)    ((x)->type & CLK_TYPE_BYPASSABLE)
+
+#define clk_is_using_xtal(x)    ((x)->mode & CLK_MODE_XTAL)
+
+static DEFINE_SPINLOCK(clk_lock);
+
+static void __clk_enable(struct clk *clk)
+{
+	if (!clk)
+		return;
+
+	/* enable parent clock first */
+	if (clk->parent)
+		__clk_enable(clk->parent);
+
+	if (clk->use_cnt++ == 0) {
+		if (clk_is_pll1(clk)) {	/* PLL1 */
+			chipcHw_pll1Enable(clk->rate_hz, 0);
+		} else if (clk_is_pll2(clk)) {	/* PLL2 */
+			chipcHw_pll2Enable(clk->rate_hz);
+		} else if (clk_is_using_xtal(clk)) {	/* source is crystal */
+			if (!clk_is_primary(clk))
+				chipcHw_bypassClockEnable(clk->csp_id);
+		} else {	/* source is PLL */
+			chipcHw_setClockEnable(clk->csp_id);
+		}
+	}
+}
+
+int clk_enable(struct clk *clk)
+{
+	unsigned long flags;
+
+	if (!clk)
+		return -EINVAL;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	__clk_enable(clk);
+	spin_unlock_irqrestore(&clk_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+static void __clk_disable(struct clk *clk)
+{
+	if (!clk)
+		return;
+
+	BUG_ON(clk->use_cnt == 0);
+
+	if (--clk->use_cnt == 0) {
+		if (clk_is_pll1(clk)) {	/* PLL1 */
+			chipcHw_pll1Disable();
+		} else if (clk_is_pll2(clk)) {	/* PLL2 */
+			chipcHw_pll2Disable();
+		} else if (clk_is_using_xtal(clk)) {	/* source is crystal */
+			if (!clk_is_primary(clk))
+				chipcHw_bypassClockDisable(clk->csp_id);
+		} else {	/* source is PLL */
+			chipcHw_setClockDisable(clk->csp_id);
+		}
+	}
+
+	if (clk->parent)
+		__clk_disable(clk->parent);
+}
+
+void clk_disable(struct clk *clk)
+{
+	unsigned long flags;
+
+	if (!clk)
+		return;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	__clk_disable(clk);
+	spin_unlock_irqrestore(&clk_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	if (!clk)
+		return 0;
+
+	return clk->rate_hz;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long flags;
+	unsigned long actual;
+	unsigned long rate_hz;
+
+	if (!clk)
+		return -EINVAL;
+
+	if (!clk_is_programmable(clk))
+		return -EINVAL;
+
+	if (clk->use_cnt)
+		return -EBUSY;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	actual = clk->parent->rate_hz;
+	rate_hz = min(actual, rate);
+	spin_unlock_irqrestore(&clk_lock, flags);
+
+	return rate_hz;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long flags;
+	unsigned long actual;
+	unsigned long rate_hz;
+
+	if (!clk)
+		return -EINVAL;
+
+	if (!clk_is_programmable(clk))
+		return -EINVAL;
+
+	if (clk->use_cnt)
+		return -EBUSY;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	actual = clk->parent->rate_hz;
+	rate_hz = min(actual, rate);
+	rate_hz = chipcHw_setClockFrequency(clk->csp_id, rate_hz);
+	clk->rate_hz = rate_hz;
+	spin_unlock_irqrestore(&clk_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+	if (!clk)
+		return NULL;
+
+	return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	unsigned long flags;
+	struct clk *old_parent;
+
+	if (!clk || !parent)
+		return -EINVAL;
+
+	if (!clk_is_primary(parent) || !clk_is_bypassable(clk))
+		return -EINVAL;
+
+	/* if more than one user, parent is not allowed */
+	if (clk->use_cnt > 1)
+		return -EBUSY;
+
+	if (clk->parent == parent)
+		return 0;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	old_parent = clk->parent;
+	clk->parent = parent;
+	if (clk_is_using_xtal(parent))
+		clk->mode |= CLK_MODE_XTAL;
+	else
+		clk->mode &= (~CLK_MODE_XTAL);
+
+	/* if clock is active */
+	if (clk->use_cnt != 0) {
+		clk->use_cnt--;
+		/* enable clock with the new parent */
+		__clk_enable(clk);
+		/* disable the old parent */
+		__clk_disable(old_parent);
+	}
+	spin_unlock_irqrestore(&clk_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(clk_set_parent);
diff --git a/arch/arm/mach-bcmring/clock.h b/arch/arm/mach-bcmring/clock.h
new file mode 100644
index 00000000000..5e0b9813897
--- /dev/null
+++ b/arch/arm/mach-bcmring/clock.h
@@ -0,0 +1,33 @@
+/*****************************************************************************
+* Copyright 2001 - 2009 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+#include <mach/csp/chipcHw_def.h>
+
+#define CLK_TYPE_PRIMARY         1	/* primary clock must NOT have a parent */
+#define CLK_TYPE_PLL1            2	/* PPL1 */
+#define CLK_TYPE_PLL2            4	/* PPL2 */
+#define CLK_TYPE_PROGRAMMABLE    8	/* programmable clock rate */
+#define CLK_TYPE_BYPASSABLE      16	/* parent can be changed */
+
+#define CLK_MODE_XTAL            1	/* clock source is from crystal */
+
+struct clk {
+	const char *name;	/* clock name */
+	unsigned int type;	/* clock type */
+	unsigned int mode;	/* current mode */
+	volatile int use_bypass;	/* indicate if it's in bypass mode */
+	chipcHw_CLOCK_e csp_id;	/* clock ID for CSP CHIPC */
+	unsigned long rate_hz;	/* clock rate in Hz */
+	unsigned int use_cnt;	/* usage count */
+	struct clk *parent;	/* parent clock */
+};
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
new file mode 100644
index 00000000000..492c649f451
--- /dev/null
+++ b/arch/arm/mach-bcmring/core.c
@@ -0,0 +1,367 @@
+/*
+ *  derived from linux/arch/arm/mach-versatile/core.c
+ *  linux/arch/arm/mach-bcmring/core.c
+ *
+ *  Copyright (C) 1999 - 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+/* Portions copyright Broadcom 2008 */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/amba/bus.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+
+#include <linux/amba/bus.h>
+#include <mach/csp/mm_addr.h>
+#include <mach/hardware.h>
+#include <asm/clkdev.h>
+#include <linux/io.h>
+#include <asm/irq.h>
+#include <asm/hardware/arm_timer.h>
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <asm/mach/mmc.h>
+
+#include <cfg_global.h>
+
+#include "clock.h"
+
+#include <csp/secHw.h>
+#include <mach/csp/secHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+#include <mach/csp/tmrHw_reg.h>
+
+#define AMBA_DEVICE(name, initname, base, plat, size)       \
+static struct amba_device name##_device = {     \
+   .dev = {                                     \
+      .coherent_dma_mask = ~0,                  \
+      .init_name = initname,                    \
+      .platform_data = plat                     \
+   },                                           \
+   .res = {                                     \
+      .start = MM_ADDR_IO_##base,               \
+		.end = MM_ADDR_IO_##base + (size) - 1,    \
+      .flags = IORESOURCE_MEM                   \
+   },                                           \
+   .dma_mask = ~0,                              \
+   .irq = {                                     \
+      IRQ_##base                                \
+   }                                            \
+}
+
+
+AMBA_DEVICE(uartA, "uarta", UARTA, NULL, SZ_4K);
+AMBA_DEVICE(uartB, "uartb", UARTB, NULL, SZ_4K);
+
+static struct clk pll1_clk = {
+	.name = "PLL1",
+	.type = CLK_TYPE_PRIMARY | CLK_TYPE_PLL1,
+	.rate_hz = 2000000000,
+	.use_cnt = 7,
+};
+
+static struct clk uart_clk = {
+	.name = "UART",
+	.type = CLK_TYPE_PROGRAMMABLE,
+	.csp_id = chipcHw_CLOCK_UART,
+	.rate_hz = HW_CFG_UART_CLK_HZ,
+	.parent = &pll1_clk,
+};
+
+static struct clk_lookup lookups[] = {
+	{			/* UART0 */
+	 .dev_id = "uarta",
+	 .clk = &uart_clk,
+	 }, {			/* UART1 */
+	     .dev_id = "uartb",
+	     .clk = &uart_clk,
+	     }
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+	&uartA_device,
+	&uartB_device,
+};
+
+void __init bcmring_amba_init(void)
+{
+	int i;
+	u32 bus_clock;
+
+/* Linux is run initially in non-secure mode. Secure peripherals */
+/* generate FIQ, and must be handled in secure mode. Until we have */
+/* a linux security monitor implementation, keep everything in */
+/* non-secure mode. */
+	chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_SPU);
+	secHw_setUnsecure(secHw_BLK_MASK_CHIP_CONTROL |
+			  secHw_BLK_MASK_KEY_SCAN |
+			  secHw_BLK_MASK_TOUCH_SCREEN |
+			  secHw_BLK_MASK_UART0 |
+			  secHw_BLK_MASK_UART1 |
+			  secHw_BLK_MASK_WATCHDOG |
+			  secHw_BLK_MASK_SPUM |
+			  secHw_BLK_MASK_DDR2 |
+			  secHw_BLK_MASK_SPU |
+			  secHw_BLK_MASK_PKA |
+			  secHw_BLK_MASK_RNG |
+			  secHw_BLK_MASK_RTC |
+			  secHw_BLK_MASK_OTP |
+			  secHw_BLK_MASK_BOOT |
+			  secHw_BLK_MASK_MPU |
+			  secHw_BLK_MASK_TZCTRL | secHw_BLK_MASK_INTR);
+
+	/* Only the devices attached to the AMBA bus are enabled just before the bus is */
+	/* scanned and the drivers are loaded. The clocks need to be on for the AMBA bus */
+	/* driver to access these blocks. The bus is probed, and the drivers are loaded. */
+	/* FIXME Need to remove enable of PIF once CLCD clock enable used properly in FPGA. */
+	bus_clock = chipcHw_REG_BUS_CLOCK_GE
+	    | chipcHw_REG_BUS_CLOCK_SDIO0 | chipcHw_REG_BUS_CLOCK_SDIO1;
+
+	chipcHw_busInterfaceClockEnable(bus_clock);
+
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
+
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+		struct amba_device *d = amba_devs[i];
+		amba_device_register(d, &iomem_resource);
+	}
+}
+
+/*
+ * Where is the timer (VA)?
+ */
+#define TIMER0_VA_BASE		 MM_IO_BASE_TMR
+#define TIMER1_VA_BASE		(MM_IO_BASE_TMR + 0x20)
+#define TIMER2_VA_BASE		(MM_IO_BASE_TMR + 0x40)
+#define TIMER3_VA_BASE          (MM_IO_BASE_TMR + 0x60)
+
+/* Timer 0 - 25 MHz, Timer3 at bus clock rate, typically  150-166 MHz */
+#if defined(CONFIG_ARCH_FPGA11107)
+/* fpga cpu/bus are currently 30 times slower so scale frequency as well to */
+/* slow down Linux's sense of time */
+#define TIMER0_FREQUENCY_MHZ  (tmrHw_LOW_FREQUENCY_MHZ * 30)
+#define TIMER1_FREQUENCY_MHZ  (tmrHw_LOW_FREQUENCY_MHZ * 30)
+#define TIMER3_FREQUENCY_MHZ  (tmrHw_HIGH_FREQUENCY_MHZ * 30)
+#define TIMER3_FREQUENCY_KHZ   (tmrHw_HIGH_FREQUENCY_HZ / 1000 * 30)
+#else
+#define TIMER0_FREQUENCY_MHZ  tmrHw_LOW_FREQUENCY_MHZ
+#define TIMER1_FREQUENCY_MHZ  tmrHw_LOW_FREQUENCY_MHZ
+#define TIMER3_FREQUENCY_MHZ  tmrHw_HIGH_FREQUENCY_MHZ
+#define TIMER3_FREQUENCY_KHZ  (tmrHw_HIGH_FREQUENCY_HZ / 1000)
+#endif
+
+#define TICKS_PER_uSEC     TIMER0_FREQUENCY_MHZ
+
+/*
+ *  These are useconds NOT ticks.
+ *
+ */
+#define mSEC_1                          1000
+#define mSEC_5                          (mSEC_1 * 5)
+#define mSEC_10                         (mSEC_1 * 10)
+#define mSEC_25                         (mSEC_1 * 25)
+#define SEC_1                           (mSEC_1 * 1000)
+
+/*
+ * How long is the timer interval?
+ */
+#define TIMER_INTERVAL	(TICKS_PER_uSEC * mSEC_10)
+#if TIMER_INTERVAL >= 0x100000
+#define TIMER_RELOAD	(TIMER_INTERVAL >> 8)
+#define TIMER_DIVISOR	(TIMER_CTRL_DIV256)
+#define TICKS2USECS(x)	(256 * (x) / TICKS_PER_uSEC)
+#elif TIMER_INTERVAL >= 0x10000
+#define TIMER_RELOAD	(TIMER_INTERVAL >> 4)	/* Divide by 16 */
+#define TIMER_DIVISOR	(TIMER_CTRL_DIV16)
+#define TICKS2USECS(x)	(16 * (x) / TICKS_PER_uSEC)
+#else
+#define TIMER_RELOAD	(TIMER_INTERVAL)
+#define TIMER_DIVISOR	(TIMER_CTRL_DIV1)
+#define TICKS2USECS(x)	((x) / TICKS_PER_uSEC)
+#endif
+
+static void timer_set_mode(enum clock_event_mode mode,
+			   struct clock_event_device *clk)
+{
+	unsigned long ctrl;
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD);
+
+		ctrl = TIMER_CTRL_PERIODIC;
+		ctrl |=
+		    TIMER_DIVISOR | TIMER_CTRL_32BIT | TIMER_CTRL_IE |
+		    TIMER_CTRL_ENABLE;
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		/* period set, and timer enabled in 'next_event' hook */
+		ctrl = TIMER_CTRL_ONESHOT;
+		ctrl |= TIMER_DIVISOR | TIMER_CTRL_32BIT | TIMER_CTRL_IE;
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	default:
+		ctrl = 0;
+	}
+
+	writel(ctrl, TIMER0_VA_BASE + TIMER_CTRL);
+}
+
+static int timer_set_next_event(unsigned long evt,
+				struct clock_event_device *unused)
+{
+	unsigned long ctrl = readl(TIMER0_VA_BASE + TIMER_CTRL);
+
+	writel(evt, TIMER0_VA_BASE + TIMER_LOAD);
+	writel(ctrl | TIMER_CTRL_ENABLE, TIMER0_VA_BASE + TIMER_CTRL);
+
+	return 0;
+}
+
+static struct clock_event_device timer0_clockevent = {
+	.name = "timer0",
+	.shift = 32,
+	.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_mode = timer_set_mode,
+	.set_next_event = timer_set_next_event,
+};
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t bcmring_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = &timer0_clockevent;
+
+	writel(1, TIMER0_VA_BASE + TIMER_INTCLR);
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction bcmring_timer_irq = {
+	.name = "bcmring Timer Tick",
+	.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler = bcmring_timer_interrupt,
+};
+
+static cycle_t bcmring_get_cycles_timer1(void)
+{
+	return ~readl(TIMER1_VA_BASE + TIMER_VALUE);
+}
+
+static cycle_t bcmring_get_cycles_timer3(void)
+{
+	return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
+}
+
+static struct clocksource clocksource_bcmring_timer1 = {
+	.name = "timer1",
+	.rating = 200,
+	.read = bcmring_get_cycles_timer1,
+	.mask = CLOCKSOURCE_MASK(32),
+	.shift = 20,
+	.flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static struct clocksource clocksource_bcmring_timer3 = {
+	.name = "timer3",
+	.rating = 100,
+	.read = bcmring_get_cycles_timer3,
+	.mask = CLOCKSOURCE_MASK(32),
+	.shift = 20,
+	.flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init bcmring_clocksource_init(void)
+{
+	/* setup timer1 as free-running clocksource */
+	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
+	writel(0xffffffff, TIMER1_VA_BASE + TIMER_LOAD);
+	writel(0xffffffff, TIMER1_VA_BASE + TIMER_VALUE);
+	writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
+	       TIMER1_VA_BASE + TIMER_CTRL);
+
+	clocksource_bcmring_timer1.mult =
+	    clocksource_khz2mult(TIMER1_FREQUENCY_MHZ * 1000,
+				 clocksource_bcmring_timer1.shift);
+	clocksource_register(&clocksource_bcmring_timer1);
+
+	/* setup timer3 as free-running clocksource */
+	writel(0, TIMER3_VA_BASE + TIMER_CTRL);
+	writel(0xffffffff, TIMER3_VA_BASE + TIMER_LOAD);
+	writel(0xffffffff, TIMER3_VA_BASE + TIMER_VALUE);
+	writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
+	       TIMER3_VA_BASE + TIMER_CTRL);
+
+	clocksource_bcmring_timer3.mult =
+	    clocksource_khz2mult(TIMER3_FREQUENCY_KHZ,
+				 clocksource_bcmring_timer3.shift);
+	clocksource_register(&clocksource_bcmring_timer3);
+
+	return 0;
+}
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ */
+void __init bcmring_init_timer(void)
+{
+	printk(KERN_INFO "bcmring_init_timer\n");
+	/*
+	 * Initialise to a known state (all timers off)
+	 */
+	writel(0, TIMER0_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER2_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER3_VA_BASE + TIMER_CTRL);
+
+	/*
+	 * Make irqs happen for the system timer
+	 */
+	setup_irq(IRQ_TIMER0, &bcmring_timer_irq);
+
+	bcmring_clocksource_init();
+
+	timer0_clockevent.mult =
+	    div_sc(1000000, NSEC_PER_SEC, timer0_clockevent.shift);
+	timer0_clockevent.max_delta_ns =
+	    clockevent_delta2ns(0xffffffff, &timer0_clockevent);
+	timer0_clockevent.min_delta_ns =
+	    clockevent_delta2ns(0xf, &timer0_clockevent);
+
+	timer0_clockevent.cpumask = cpumask_of(0);
+	clockevents_register_device(&timer0_clockevent);
+}
+
+struct sys_timer bcmring_timer = {
+	.init = bcmring_init_timer,
+};
diff --git a/arch/arm/mach-bcmring/include/mach/clkdev.h b/arch/arm/mach-bcmring/include/mach/clkdev.h
new file mode 100644
index 00000000000..04b37a89801
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
-- 
cgit v1.2.3


From b7462d654f623738b4b3e03cff20f68b5b9a77f5 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 19:59:04 +0100
Subject: ARM: 5645/1: bcmring: add bcmring irq.c

init irq and handler
add irq controller register file and header files

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/include/csp/intcHw.h         |  40 ++++
 .../arm/mach-bcmring/include/mach/csp/intcHw_reg.h | 246 +++++++++++++++++++++
 arch/arm/mach-bcmring/include/mach/irqs.h          | 132 +++++++++++
 arch/arm/mach-bcmring/irq.c                        | 127 +++++++++++
 4 files changed, 545 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/csp/intcHw.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/irqs.h
 create mode 100644 arch/arm/mach-bcmring/irq.c

(limited to 'arch/arm')

diff --git a/arch/arm/mach-bcmring/include/csp/intcHw.h b/arch/arm/mach-bcmring/include/csp/intcHw.h
new file mode 100644
index 00000000000..1c639c8ee08
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/intcHw.h
@@ -0,0 +1,40 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+/****************************************************************************/
+/**
+*  @file    intcHw.h
+*
+*  @brief   generic interrupt controller API
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+
+#ifndef _INTCHW_H
+#define _INTCHW_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <mach/csp/intcHw_reg.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+static inline void intcHw_irq_disable(void *basep, uint32_t mask);
+static inline void intcHw_irq_enable(void *basep, uint32_t mask);
+
+#endif /* _INTCHW_H */
+
diff --git a/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h
new file mode 100644
index 00000000000..e01fc4607c9
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h
@@ -0,0 +1,246 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    intcHw_reg.h
+*
+*  @brief   platform specific interrupt controller bit assignments
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+
+#ifndef _INTCHW_REG_H
+#define _INTCHW_REG_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <csp/stdint.h>
+#include <csp/reg.h>
+#include <mach/csp/mm_io.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+#define INTCHW_NUM_IRQ_PER_INTC   32	/* Maximum number of interrupt controllers */
+#define INTCHW_NUM_INTC           3
+
+/* Defines for interrupt controllers. This simplifies and cleans up the function calls. */
+#define INTCHW_INTC0    ((void *)MM_IO_BASE_INTC0)
+#define INTCHW_INTC1    ((void *)MM_IO_BASE_INTC1)
+#define INTCHW_SINTC    ((void *)MM_IO_BASE_SINTC)
+
+/* INTC0 - interrupt controller 0 */
+#define INTCHW_INTC0_PIF_BITNUM           31	/* Peripheral interface interrupt */
+#define INTCHW_INTC0_CLCD_BITNUM          30	/* LCD Controller interrupt */
+#define INTCHW_INTC0_GE_BITNUM            29	/* Graphic engine interrupt */
+#define INTCHW_INTC0_APM_BITNUM           28	/* Audio process module interrupt */
+#define INTCHW_INTC0_ESW_BITNUM           27	/* Ethernet switch interrupt */
+#define INTCHW_INTC0_SPIH_BITNUM          26	/* SPI host interrupt */
+#define INTCHW_INTC0_TIMER3_BITNUM        25	/* Timer3 interrupt */
+#define INTCHW_INTC0_TIMER2_BITNUM        24	/* Timer2 interrupt */
+#define INTCHW_INTC0_TIMER1_BITNUM        23	/* Timer1 interrupt */
+#define INTCHW_INTC0_TIMER0_BITNUM        22	/* Timer0 interrupt */
+#define INTCHW_INTC0_SDIOH1_BITNUM        21	/* SDIO1 host interrupt */
+#define INTCHW_INTC0_SDIOH0_BITNUM        20	/* SDIO0 host interrupt */
+#define INTCHW_INTC0_USBD_BITNUM          19	/* USB device interrupt */
+#define INTCHW_INTC0_USBH1_BITNUM         18	/* USB1 host interrupt */
+#define INTCHW_INTC0_USBHD2_BITNUM        17	/* USB host2/device2 interrupt */
+#define INTCHW_INTC0_VPM_BITNUM           16	/* Voice process module interrupt */
+#define INTCHW_INTC0_DMA1C7_BITNUM        15	/* DMA1 channel 7 interrupt */
+#define INTCHW_INTC0_DMA1C6_BITNUM        14	/* DMA1 channel 6 interrupt */
+#define INTCHW_INTC0_DMA1C5_BITNUM        13	/* DMA1 channel 5 interrupt */
+#define INTCHW_INTC0_DMA1C4_BITNUM        12	/* DMA1 channel 4 interrupt */
+#define INTCHW_INTC0_DMA1C3_BITNUM        11	/* DMA1 channel 3 interrupt */
+#define INTCHW_INTC0_DMA1C2_BITNUM        10	/* DMA1 channel 2 interrupt */
+#define INTCHW_INTC0_DMA1C1_BITNUM         9	/* DMA1 channel 1 interrupt */
+#define INTCHW_INTC0_DMA1C0_BITNUM         8	/* DMA1 channel 0 interrupt */
+#define INTCHW_INTC0_DMA0C7_BITNUM         7	/* DMA0 channel 7 interrupt */
+#define INTCHW_INTC0_DMA0C6_BITNUM         6	/* DMA0 channel 6 interrupt */
+#define INTCHW_INTC0_DMA0C5_BITNUM         5	/* DMA0 channel 5 interrupt */
+#define INTCHW_INTC0_DMA0C4_BITNUM         4	/* DMA0 channel 4 interrupt */
+#define INTCHW_INTC0_DMA0C3_BITNUM         3	/* DMA0 channel 3 interrupt */
+#define INTCHW_INTC0_DMA0C2_BITNUM         2	/* DMA0 channel 2 interrupt */
+#define INTCHW_INTC0_DMA0C1_BITNUM         1	/* DMA0 channel 1 interrupt */
+#define INTCHW_INTC0_DMA0C0_BITNUM         0	/* DMA0 channel 0 interrupt */
+
+#define INTCHW_INTC0_PIF                  (1<<INTCHW_INTC0_PIF_BITNUM)
+#define INTCHW_INTC0_CLCD                 (1<<INTCHW_INTC0_CLCD_BITNUM)
+#define INTCHW_INTC0_GE                   (1<<INTCHW_INTC0_GE_BITNUM)
+#define INTCHW_INTC0_APM                  (1<<INTCHW_INTC0_APM_BITNUM)
+#define INTCHW_INTC0_ESW                  (1<<INTCHW_INTC0_ESW_BITNUM)
+#define INTCHW_INTC0_SPIH                 (1<<INTCHW_INTC0_SPIH_BITNUM)
+#define INTCHW_INTC0_TIMER3               (1<<INTCHW_INTC0_TIMER3_BITNUM)
+#define INTCHW_INTC0_TIMER2               (1<<INTCHW_INTC0_TIMER2_BITNUM)
+#define INTCHW_INTC0_TIMER1               (1<<INTCHW_INTC0_TIMER1_BITNUM)
+#define INTCHW_INTC0_TIMER0               (1<<INTCHW_INTC0_TIMER0_BITNUM)
+#define INTCHW_INTC0_SDIOH1               (1<<INTCHW_INTC0_SDIOH1_BITNUM)
+#define INTCHW_INTC0_SDIOH0               (1<<INTCHW_INTC0_SDIOH0_BITNUM)
+#define INTCHW_INTC0_USBD                 (1<<INTCHW_INTC0_USBD_BITNUM)
+#define INTCHW_INTC0_USBH1                (1<<INTCHW_INTC0_USBH1_BITNUM)
+#define INTCHW_INTC0_USBHD2               (1<<INTCHW_INTC0_USBHD2_BITNUM)
+#define INTCHW_INTC0_VPM                  (1<<INTCHW_INTC0_VPM_BITNUM)
+#define INTCHW_INTC0_DMA1C7               (1<<INTCHW_INTC0_DMA1C7_BITNUM)
+#define INTCHW_INTC0_DMA1C6               (1<<INTCHW_INTC0_DMA1C6_BITNUM)
+#define INTCHW_INTC0_DMA1C5               (1<<INTCHW_INTC0_DMA1C5_BITNUM)
+#define INTCHW_INTC0_DMA1C4               (1<<INTCHW_INTC0_DMA1C4_BITNUM)
+#define INTCHW_INTC0_DMA1C3               (1<<INTCHW_INTC0_DMA1C3_BITNUM)
+#define INTCHW_INTC0_DMA1C2               (1<<INTCHW_INTC0_DMA1C2_BITNUM)
+#define INTCHW_INTC0_DMA1C1               (1<<INTCHW_INTC0_DMA1C1_BITNUM)
+#define INTCHW_INTC0_DMA1C0               (1<<INTCHW_INTC0_DMA1C0_BITNUM)
+#define INTCHW_INTC0_DMA0C7               (1<<INTCHW_INTC0_DMA0C7_BITNUM)
+#define INTCHW_INTC0_DMA0C6               (1<<INTCHW_INTC0_DMA0C6_BITNUM)
+#define INTCHW_INTC0_DMA0C5               (1<<INTCHW_INTC0_DMA0C5_BITNUM)
+#define INTCHW_INTC0_DMA0C4               (1<<INTCHW_INTC0_DMA0C4_BITNUM)
+#define INTCHW_INTC0_DMA0C3               (1<<INTCHW_INTC0_DMA0C3_BITNUM)
+#define INTCHW_INTC0_DMA0C2               (1<<INTCHW_INTC0_DMA0C2_BITNUM)
+#define INTCHW_INTC0_DMA0C1               (1<<INTCHW_INTC0_DMA0C1_BITNUM)
+#define INTCHW_INTC0_DMA0C0               (1<<INTCHW_INTC0_DMA0C0_BITNUM)
+
+/* INTC1 - interrupt controller 1 */
+#define INTCHW_INTC1_DDRVPMP_BITNUM       27	/* DDR and VPM PLL clock phase relationship interupt (Not for A0) */
+#define INTCHW_INTC1_DDRVPMT_BITNUM       26	/* DDR and VPM HW phase align timeout interrupt (Not for A0) */
+#define INTCHW_INTC1_DDRP_BITNUM          26	/* DDR and PLL clock phase relationship interupt (For A0 only)) */
+#define INTCHW_INTC1_RTC2_BITNUM          25	/* Real time clock tamper interrupt */
+#define INTCHW_INTC1_VDEC_BITNUM          24	/* Hantro Video Decoder interrupt */
+/* Bits 13-23 are non-secure versions of the corresponding secure bits in SINTC bits 0-10. */
+#define INTCHW_INTC1_SPUM_BITNUM          23	/* Secure process module interrupt */
+#define INTCHW_INTC1_RTC1_BITNUM          22	/* Real time clock one-shot interrupt */
+#define INTCHW_INTC1_RTC0_BITNUM          21	/* Real time clock periodic interrupt */
+#define INTCHW_INTC1_RNG_BITNUM           20	/* Random number generator interrupt */
+#define INTCHW_INTC1_FMPU_BITNUM          19	/* Flash memory parition unit interrupt */
+#define INTCHW_INTC1_VMPU_BITNUM          18	/* VRAM memory partition interrupt */
+#define INTCHW_INTC1_DMPU_BITNUM          17	/* DDR2 memory partition interrupt */
+#define INTCHW_INTC1_KEYC_BITNUM          16	/* Key pad controller interrupt */
+#define INTCHW_INTC1_TSC_BITNUM           15	/* Touch screen controller interrupt */
+#define INTCHW_INTC1_UART0_BITNUM         14	/* UART 0 */
+#define INTCHW_INTC1_WDOG_BITNUM          13	/* Watchdog timer interrupt */
+
+#define INTCHW_INTC1_UART1_BITNUM         12	/* UART 1 */
+#define INTCHW_INTC1_PMUIRQ_BITNUM        11	/* ARM performance monitor interrupt */
+#define INTCHW_INTC1_COMMRX_BITNUM        10	/* ARM DDC receive interrupt */
+#define INTCHW_INTC1_COMMTX_BITNUM         9	/* ARM DDC transmit interrupt */
+#define INTCHW_INTC1_FLASHC_BITNUM         8	/* Flash controller interrupt */
+#define INTCHW_INTC1_GPHY_BITNUM           7	/* Gigabit Phy interrupt */
+#define INTCHW_INTC1_SPIS_BITNUM           6	/* SPI slave interrupt */
+#define INTCHW_INTC1_I2CS_BITNUM           5	/* I2C slave interrupt */
+#define INTCHW_INTC1_I2CH_BITNUM           4	/* I2C host interrupt */
+#define INTCHW_INTC1_I2S1_BITNUM           3	/* I2S1 interrupt */
+#define INTCHW_INTC1_I2S0_BITNUM           2	/* I2S0 interrupt */
+#define INTCHW_INTC1_GPIO1_BITNUM          1	/* GPIO bit 64//32 combined interrupt */
+#define INTCHW_INTC1_GPIO0_BITNUM          0	/* GPIO bit 31//0 combined interrupt */
+
+#define INTCHW_INTC1_DDRVPMT              (1<<INTCHW_INTC1_DDRVPMT_BITNUM)
+#define INTCHW_INTC1_DDRVPMP              (1<<INTCHW_INTC1_DDRVPMP_BITNUM)
+#define INTCHW_INTC1_DDRP                 (1<<INTCHW_INTC1_DDRP_BITNUM)
+#define INTCHW_INTC1_VDEC                 (1<<INTCHW_INTC1_VDEC_BITNUM)
+#define INTCHW_INTC1_SPUM                 (1<<INTCHW_INTC1_SPUM_BITNUM)
+#define INTCHW_INTC1_RTC2                 (1<<INTCHW_INTC1_RTC2_BITNUM)
+#define INTCHW_INTC1_RTC1                 (1<<INTCHW_INTC1_RTC1_BITNUM)
+#define INTCHW_INTC1_RTC0                 (1<<INTCHW_INTC1_RTC0_BITNUM)
+#define INTCHW_INTC1_RNG                  (1<<INTCHW_INTC1_RNG_BITNUM)
+#define INTCHW_INTC1_FMPU                 (1<<INTCHW_INTC1_FMPU_BITNUM)
+#define INTCHW_INTC1_IMPU                 (1<<INTCHW_INTC1_IMPU_BITNUM)
+#define INTCHW_INTC1_DMPU                 (1<<INTCHW_INTC1_DMPU_BITNUM)
+#define INTCHW_INTC1_KEYC                 (1<<INTCHW_INTC1_KEYC_BITNUM)
+#define INTCHW_INTC1_TSC                  (1<<INTCHW_INTC1_TSC_BITNUM)
+#define INTCHW_INTC1_UART0                (1<<INTCHW_INTC1_UART0_BITNUM)
+#define INTCHW_INTC1_WDOG                 (1<<INTCHW_INTC1_WDOG_BITNUM)
+#define INTCHW_INTC1_UART1                (1<<INTCHW_INTC1_UART1_BITNUM)
+#define INTCHW_INTC1_PMUIRQ               (1<<INTCHW_INTC1_PMUIRQ_BITNUM)
+#define INTCHW_INTC1_COMMRX               (1<<INTCHW_INTC1_COMMRX_BITNUM)
+#define INTCHW_INTC1_COMMTX               (1<<INTCHW_INTC1_COMMTX_BITNUM)
+#define INTCHW_INTC1_FLASHC               (1<<INTCHW_INTC1_FLASHC_BITNUM)
+#define INTCHW_INTC1_GPHY                 (1<<INTCHW_INTC1_GPHY_BITNUM)
+#define INTCHW_INTC1_SPIS                 (1<<INTCHW_INTC1_SPIS_BITNUM)
+#define INTCHW_INTC1_I2CS                 (1<<INTCHW_INTC1_I2CS_BITNUM)
+#define INTCHW_INTC1_I2CH                 (1<<INTCHW_INTC1_I2CH_BITNUM)
+#define INTCHW_INTC1_I2S1                 (1<<INTCHW_INTC1_I2S1_BITNUM)
+#define INTCHW_INTC1_I2S0                 (1<<INTCHW_INTC1_I2S0_BITNUM)
+#define INTCHW_INTC1_GPIO1                (1<<INTCHW_INTC1_GPIO1_BITNUM)
+#define INTCHW_INTC1_GPIO0                (1<<INTCHW_INTC1_GPIO0_BITNUM)
+
+/* SINTC secure int controller */
+#define INTCHW_SINTC_RTC2_BITNUM          15	/* Real time clock tamper interrupt */
+#define INTCHW_SINTC_TIMER3_BITNUM        14	/* Secure timer3 interrupt */
+#define INTCHW_SINTC_TIMER2_BITNUM        13	/* Secure timer2 interrupt */
+#define INTCHW_SINTC_TIMER1_BITNUM        12	/* Secure timer1 interrupt */
+#define INTCHW_SINTC_TIMER0_BITNUM        11	/* Secure timer0 interrupt */
+#define INTCHW_SINTC_SPUM_BITNUM          10	/* Secure process module interrupt */
+#define INTCHW_SINTC_RTC1_BITNUM           9	/* Real time clock one-shot interrupt */
+#define INTCHW_SINTC_RTC0_BITNUM           8	/* Real time clock periodic interrupt */
+#define INTCHW_SINTC_RNG_BITNUM            7	/* Random number generator interrupt */
+#define INTCHW_SINTC_FMPU_BITNUM           6	/* Flash memory parition unit interrupt */
+#define INTCHW_SINTC_VMPU_BITNUM           5	/* VRAM memory partition interrupt */
+#define INTCHW_SINTC_DMPU_BITNUM           4	/* DDR2 memory partition interrupt */
+#define INTCHW_SINTC_KEYC_BITNUM           3	/* Key pad controller interrupt */
+#define INTCHW_SINTC_TSC_BITNUM            2	/* Touch screen controller interrupt */
+#define INTCHW_SINTC_UART0_BITNUM          1	/* UART0 interrupt */
+#define INTCHW_SINTC_WDOG_BITNUM           0	/* Watchdog timer interrupt */
+
+#define INTCHW_SINTC_TIMER3               (1<<INTCHW_SINTC_TIMER3_BITNUM)
+#define INTCHW_SINTC_TIMER2               (1<<INTCHW_SINTC_TIMER2_BITNUM)
+#define INTCHW_SINTC_TIMER1               (1<<INTCHW_SINTC_TIMER1_BITNUM)
+#define INTCHW_SINTC_TIMER0               (1<<INTCHW_SINTC_TIMER0_BITNUM)
+#define INTCHW_SINTC_SPUM                 (1<<INTCHW_SINTC_SPUM_BITNUM)
+#define INTCHW_SINTC_RTC2                 (1<<INTCHW_SINTC_RTC2_BITNUM)
+#define INTCHW_SINTC_RTC1                 (1<<INTCHW_SINTC_RTC1_BITNUM)
+#define INTCHW_SINTC_RTC0                 (1<<INTCHW_SINTC_RTC0_BITNUM)
+#define INTCHW_SINTC_RNG                  (1<<INTCHW_SINTC_RNG_BITNUM)
+#define INTCHW_SINTC_FMPU                 (1<<INTCHW_SINTC_FMPU_BITNUM)
+#define INTCHW_SINTC_IMPU                 (1<<INTCHW_SINTC_IMPU_BITNUM)
+#define INTCHW_SINTC_DMPU                 (1<<INTCHW_SINTC_DMPU_BITNUM)
+#define INTCHW_SINTC_KEYC                 (1<<INTCHW_SINTC_KEYC_BITNUM)
+#define INTCHW_SINTC_TSC                  (1<<INTCHW_SINTC_TSC_BITNUM)
+#define INTCHW_SINTC_UART0                (1<<INTCHW_SINTC_UART0_BITNUM)
+#define INTCHW_SINTC_WDOG                 (1<<INTCHW_SINTC_WDOG_BITNUM)
+
+/* PL192 Vectored Interrupt Controller (VIC) layout */
+#define INTCHW_IRQSTATUS      0x00	/* IRQ status register */
+#define INTCHW_FIQSTATUS      0x04	/* FIQ status register */
+#define INTCHW_RAWINTR        0x08	/* Raw Interrupt Status register */
+#define INTCHW_INTSELECT      0x0c	/* Interrupt Select Register */
+#define INTCHW_INTENABLE      0x10	/* Interrupt Enable Register */
+#define INTCHW_INTENCLEAR     0x14	/* Interrupt Enable Clear Register */
+#define INTCHW_SOFTINT        0x18	/* Soft Interrupt Register */
+#define INTCHW_SOFTINTCLEAR   0x1c	/* Soft Interrupt Clear Register */
+#define INTCHW_PROTECTION     0x20	/* Protection Enable Register */
+#define INTCHW_SWPRIOMASK     0x24	/* Software Priority Mask Register */
+#define INTCHW_PRIODAISY      0x28	/* Priority Daisy Chain Register */
+#define INTCHW_VECTADDR0      0x100	/* Vector Address Registers */
+#define INTCHW_VECTPRIO0      0x200	/* Vector Priority Registers 0-31 */
+#define INTCHW_ADDRESS        0xf00	/* Vector Address Register 0-31 */
+#define INTCHW_PID            0xfe0	/* Peripheral ID Register 0-3 */
+#define INTCHW_PCELLID        0xff0	/* PrimeCell ID Register 0-3 */
+
+/* Example Usage: intcHw_irq_enable(INTCHW_INTC0, INTCHW_INTC0_TIMER0); */
+/*                intcHw_irq_clear(INTCHW_INTC0, INTCHW_INTC0_TIMER0); */
+/*                uint32_t bits = intcHw_irq_status(INTCHW_INTC0); */
+/*                uint32_t bits = intcHw_irq_raw_status(INTCHW_INTC0); */
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+/* Clear one or more IRQ interrupts. */
+static inline void intcHw_irq_disable(void *basep, uint32_t mask)
+{
+	__REG32(basep + INTCHW_INTENCLEAR) = mask;
+}
+
+/* Enables one or more IRQ interrupts. */
+static inline void intcHw_irq_enable(void *basep, uint32_t mask)
+{
+	__REG32(basep + INTCHW_INTENABLE) = mask;
+}
+
+#endif /* _INTCHW_REG_H */
diff --git a/arch/arm/mach-bcmring/include/mach/irqs.h b/arch/arm/mach-bcmring/include/mach/irqs.h
new file mode 100644
index 00000000000..b279b825d4a
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/irqs.h
@@ -0,0 +1,132 @@
+/*
+ *  Copyright (C) 2007 Broadcom
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#if !defined(ARCH_BCMRING_IRQS_H)
+#define ARCH_BCMRING_IRQS_H
+
+/* INTC0 - interrupt controller 0 */
+#define IRQ_INTC0_START     0
+#define IRQ_DMA0C0          0	/* DMA0 channel 0 interrupt */
+#define IRQ_DMA0C1          1	/* DMA0 channel 1 interrupt */
+#define IRQ_DMA0C2          2	/* DMA0 channel 2 interrupt */
+#define IRQ_DMA0C3          3	/* DMA0 channel 3 interrupt */
+#define IRQ_DMA0C4          4	/* DMA0 channel 4 interrupt */
+#define IRQ_DMA0C5          5	/* DMA0 channel 5 interrupt */
+#define IRQ_DMA0C6          6	/* DMA0 channel 6 interrupt */
+#define IRQ_DMA0C7          7	/* DMA0 channel 7 interrupt */
+#define IRQ_DMA1C0          8	/* DMA1 channel 0 interrupt */
+#define IRQ_DMA1C1          9	/* DMA1 channel 1 interrupt */
+#define IRQ_DMA1C2         10	/* DMA1 channel 2 interrupt */
+#define IRQ_DMA1C3         11	/* DMA1 channel 3 interrupt */
+#define IRQ_DMA1C4         12	/* DMA1 channel 4 interrupt */
+#define IRQ_DMA1C5         13	/* DMA1 channel 5 interrupt */
+#define IRQ_DMA1C6         14	/* DMA1 channel 6 interrupt */
+#define IRQ_DMA1C7         15	/* DMA1 channel 7 interrupt */
+#define IRQ_VPM            16	/* Voice process module interrupt */
+#define IRQ_USBHD2         17	/* USB host2/device2 interrupt */
+#define IRQ_USBH1          18	/* USB1 host interrupt */
+#define IRQ_USBD           19	/* USB device interrupt */
+#define IRQ_SDIOH0         20	/* SDIO0 host interrupt */
+#define IRQ_SDIOH1         21	/* SDIO1 host interrupt */
+#define IRQ_TIMER0         22	/* Timer0 interrupt */
+#define IRQ_TIMER1         23	/* Timer1 interrupt */
+#define IRQ_TIMER2         24	/* Timer2 interrupt */
+#define IRQ_TIMER3         25	/* Timer3 interrupt */
+#define IRQ_SPIH           26	/* SPI host interrupt */
+#define IRQ_ESW            27	/* Ethernet switch interrupt */
+#define IRQ_APM            28	/* Audio process module interrupt */
+#define IRQ_GE             29	/* Graphic engine interrupt */
+#define IRQ_CLCD           30	/* LCD Controller interrupt */
+#define IRQ_PIF            31	/* Peripheral interface interrupt */
+#define IRQ_INTC0_END      31
+
+/* INTC1 - interrupt controller 1 */
+#define IRQ_INTC1_START    32
+#define IRQ_GPIO0          32	/*  0 GPIO bit 31//0 combined interrupt */
+#define IRQ_GPIO1          33	/*  1 GPIO bit 64//32 combined interrupt */
+#define IRQ_I2S0           34	/*  2 I2S0 interrupt */
+#define IRQ_I2S1           35	/*  3 I2S1 interrupt */
+#define IRQ_I2CH           36	/*  4 I2C host interrupt */
+#define IRQ_I2CS           37	/*  5 I2C slave interrupt */
+#define IRQ_SPIS           38	/*  6 SPI slave interrupt */
+#define IRQ_GPHY           39	/*  7 Gigabit Phy interrupt */
+#define IRQ_FLASHC         40	/*  8 Flash controller interrupt */
+#define IRQ_COMMTX         41	/*  9 ARM DDC transmit interrupt */
+#define IRQ_COMMRX         42	/* 10 ARM DDC receive interrupt */
+#define IRQ_PMUIRQ         43	/* 11 ARM performance monitor interrupt */
+#define IRQ_UARTB          44	/* 12 UARTB */
+#define IRQ_WATCHDOG       45	/* 13 Watchdog timer interrupt */
+#define IRQ_UARTA          46	/* 14 UARTA */
+#define IRQ_TSC            47	/* 15 Touch screen controller interrupt */
+#define IRQ_KEYC           48	/* 16 Key pad controller interrupt */
+#define IRQ_DMPU           49	/* 17 DDR2 memory partition interrupt */
+#define IRQ_VMPU           50	/* 18 VRAM memory partition interrupt */
+#define IRQ_FMPU           51	/* 19 Flash memory parition unit interrupt */
+#define IRQ_RNG            52	/* 20 Random number generator interrupt */
+#define IRQ_RTC0           53	/* 21 Real time clock periodic interrupt */
+#define IRQ_RTC1           54	/* 22 Real time clock one-shot interrupt */
+#define IRQ_SPUM           55	/* 23 Secure process module interrupt */
+#define IRQ_VDEC           56	/* 24 Hantro video decoder interrupt */
+#define IRQ_RTC2           57	/* 25 Real time clock tamper interrupt */
+#define IRQ_DDRP           58	/* 26 DDR Panic interrupt */
+#define IRQ_INTC1_END      58
+
+/* SINTC secure int controller */
+#define IRQ_SINTC_START    59
+#define IRQ_SEC_WATCHDOG   59	/*  0 Watchdog timer interrupt */
+#define IRQ_SEC_UARTA      60	/*  1 UARTA interrupt */
+#define IRQ_SEC_TSC        61	/*  2 Touch screen controller interrupt */
+#define IRQ_SEC_KEYC       62	/*  3 Key pad controller interrupt */
+#define IRQ_SEC_DMPU       63	/*  4 DDR2 memory partition interrupt */
+#define IRQ_SEC_VMPU       64	/*  5 VRAM memory partition interrupt */
+#define IRQ_SEC_FMPU       65	/*  6 Flash memory parition unit interrupt */
+#define IRQ_SEC_RNG        66	/*  7 Random number generator interrupt */
+#define IRQ_SEC_RTC0       67	/*  8 Real time clock periodic interrupt */
+#define IRQ_SEC_RTC1       68	/*  9 Real time clock one-shot interrupt */
+#define IRQ_SEC_SPUM       69	/* 10 Secure process module interrupt */
+#define IRQ_SEC_TIMER0     70	/* 11 Secure timer0 interrupt */
+#define IRQ_SEC_TIMER1     71	/* 12 Secure timer1 interrupt */
+#define IRQ_SEC_TIMER2     72	/* 13 Secure timer2 interrupt */
+#define IRQ_SEC_TIMER3     73	/* 14 Secure timer3 interrupt */
+#define IRQ_SEC_RTC2       74	/* 15 Real time clock tamper interrupt */
+
+#define IRQ_SINTC_END      74
+
+/* Note: there are 3 INTC registers of 32 bits each. So internal IRQs could go from 0-95 */
+/*       Since IRQs are typically viewed in decimal, we start the gpio based IRQs off at 100 */
+/*       to make the mapping easy for humans to decipher. */
+
+#define IRQ_GPIO_0                  100
+
+#define NUM_INTERNAL_IRQS          (IRQ_SINTC_END+1)
+
+/* I couldn't get the gpioHw_reg.h file to be included cleanly, so I hardcoded it */
+/* define NUM_GPIO_IRQS               GPIOHW_TOTAL_NUM_PINS */
+#define NUM_GPIO_IRQS               62
+
+#define NR_IRQS                     (IRQ_GPIO_0 + NUM_GPIO_IRQS)
+
+#define IRQ_UNKNOWN                 -1
+
+/* Tune these bits to preclude noisy or unsupported interrupt sources as required. */
+#define IRQ_INTC0_VALID_MASK        0xffffffff
+#define IRQ_INTC1_VALID_MASK        0x07ffffff
+#define IRQ_SINTC_VALID_MASK        0x0000ffff
+
+#endif /* ARCH_BCMRING_IRQS_H */
diff --git a/arch/arm/mach-bcmring/irq.c b/arch/arm/mach-bcmring/irq.c
new file mode 100644
index 00000000000..dc1c4939b0c
--- /dev/null
+++ b/arch/arm/mach-bcmring/irq.c
@@ -0,0 +1,127 @@
+/*
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/init.h>
+#include <linux/stddef.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/version.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/mach/irq.h>
+#include <mach/csp/intcHw_reg.h>
+#include <mach/csp/mm_io.h>
+
+static void bcmring_mask_irq0(unsigned int irq)
+{
+	writel(1 << (irq - IRQ_INTC0_START),
+	       MM_IO_BASE_INTC0 + INTCHW_INTENCLEAR);
+}
+
+static void bcmring_unmask_irq0(unsigned int irq)
+{
+	writel(1 << (irq - IRQ_INTC0_START),
+	       MM_IO_BASE_INTC0 + INTCHW_INTENABLE);
+}
+
+static void bcmring_mask_irq1(unsigned int irq)
+{
+	writel(1 << (irq - IRQ_INTC1_START),
+	       MM_IO_BASE_INTC1 + INTCHW_INTENCLEAR);
+}
+
+static void bcmring_unmask_irq1(unsigned int irq)
+{
+	writel(1 << (irq - IRQ_INTC1_START),
+	       MM_IO_BASE_INTC1 + INTCHW_INTENABLE);
+}
+
+static void bcmring_mask_irq2(unsigned int irq)
+{
+	writel(1 << (irq - IRQ_SINTC_START),
+	       MM_IO_BASE_SINTC + INTCHW_INTENCLEAR);
+}
+
+static void bcmring_unmask_irq2(unsigned int irq)
+{
+	writel(1 << (irq - IRQ_SINTC_START),
+	       MM_IO_BASE_SINTC + INTCHW_INTENABLE);
+}
+
+static struct irq_chip bcmring_irq0_chip = {
+	.typename = "ARM-INTC0",
+	.ack = bcmring_mask_irq0,
+	.mask = bcmring_mask_irq0,	/* mask a specific interrupt, blocking its delivery. */
+	.unmask = bcmring_unmask_irq0,	/* unmaks an interrupt */
+};
+
+static struct irq_chip bcmring_irq1_chip = {
+	.typename = "ARM-INTC1",
+	.ack = bcmring_mask_irq1,
+	.mask = bcmring_mask_irq1,
+	.unmask = bcmring_unmask_irq1,
+};
+
+static struct irq_chip bcmring_irq2_chip = {
+	.typename = "ARM-SINTC",
+	.ack = bcmring_mask_irq2,
+	.mask = bcmring_mask_irq2,
+	.unmask = bcmring_unmask_irq2,
+};
+
+static void vic_init(void __iomem *base, struct irq_chip *chip,
+		     unsigned int irq_start, unsigned int vic_sources)
+{
+	unsigned int i;
+	for (i = 0; i < 32; i++) {
+		unsigned int irq = irq_start + i;
+		set_irq_chip(irq, chip);
+		set_irq_chip_data(irq, base);
+
+		if (vic_sources & (1 << i)) {
+			set_irq_handler(irq, handle_level_irq);
+			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+		}
+	}
+	writel(0, base + INTCHW_INTSELECT);
+	writel(0, base + INTCHW_INTENABLE);
+	writel(~0, base + INTCHW_INTENCLEAR);
+	writel(0, base + INTCHW_IRQSTATUS);
+	writel(~0, base + INTCHW_SOFTINTCLEAR);
+}
+
+void __init bcmring_init_irq(void)
+{
+	vic_init((void __iomem *)MM_IO_BASE_INTC0, &bcmring_irq0_chip,
+		 IRQ_INTC0_START, IRQ_INTC0_VALID_MASK);
+	vic_init((void __iomem *)MM_IO_BASE_INTC1, &bcmring_irq1_chip,
+		 IRQ_INTC1_START, IRQ_INTC1_VALID_MASK);
+	vic_init((void __iomem *)MM_IO_BASE_SINTC, &bcmring_irq2_chip,
+		 IRQ_SINTC_START, IRQ_SINTC_VALID_MASK);
+
+	/* special cases */
+	if (INTCHW_INTC1_GPIO0 & IRQ_INTC1_VALID_MASK) {
+		set_irq_handler(IRQ_GPIO0, handle_simple_irq);
+	}
+	if (INTCHW_INTC1_GPIO1 & IRQ_INTC1_VALID_MASK) {
+		set_irq_handler(IRQ_GPIO1, handle_simple_irq);
+	}
+}
-- 
cgit v1.2.3


From 661f78d80969eefb25a0e99c08c0eba81b37861e Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 19:59:57 +0100
Subject: ARM: 5646/1: bcmring: add mach-bcmring/mm.c and memory headers

memory map addresses
memory map description and init functions

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/include/mach/csp/mm_addr.h   | 101 ++++++++++++++
 arch/arm/mach-bcmring/include/mach/csp/mm_io.h     | 147 +++++++++++++++++++++
 arch/arm/mach-bcmring/include/mach/memory.h        |  33 +++++
 .../mach-bcmring/include/mach/memory_settings.h    |  67 ++++++++++
 arch/arm/mach-bcmring/include/mach/vmalloc.h       |  25 ++++
 arch/arm/mach-bcmring/mm.c                         |  56 ++++++++
 6 files changed, 429 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/mm_io.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/memory.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/memory_settings.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/vmalloc.h
 create mode 100644 arch/arm/mach-bcmring/mm.c

(limited to 'arch/arm')

diff --git a/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
new file mode 100644
index 00000000000..86bb58d4f58
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
@@ -0,0 +1,101 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    mm_addr.h
+*
+*  @brief   Memory Map address defintions
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+
+#ifndef _MM_ADDR_H
+#define _MM_ADDR_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#if !defined(CSP_SIMULATION)
+#include <cfg_global.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+/*  Memory Map address definitions */
+
+#define MM_ADDR_DDR                0x00000000
+
+#define MM_ADDR_IO_VPM_EXTMEM_RSVD 0x0F000000	/* 16 MB - Reserved external memory for VPM use */
+
+#define MM_ADDR_IO_FLASHC          0x20000000
+#define MM_ADDR_IO_BROM            0x30000000
+#define MM_ADDR_IO_ARAM            0x30100000	/* 64 KB - extra cycle latency - WS switch */
+#define MM_ADDR_IO_DMA0            0x30200000
+#define MM_ADDR_IO_DMA1            0x30300000
+#define MM_ADDR_IO_ESW             0x30400000
+#define MM_ADDR_IO_CLCD            0x30500000
+#define MM_ADDR_IO_PIF             0x30580000
+#define MM_ADDR_IO_APM             0x30600000
+#define MM_ADDR_IO_SPUM            0x30700000
+#define MM_ADDR_IO_VPM_PROG        0x30800000
+#define MM_ADDR_IO_VPM_DATA        0x30A00000
+#define MM_ADDR_IO_VRAM            0x40000000	/* 64 KB  - security block in front of it */
+#define MM_ADDR_IO_CHIPC           0x80000000
+#define MM_ADDR_IO_UMI             0x80001000
+#define MM_ADDR_IO_NAND            0x80001800
+#define MM_ADDR_IO_LEDM            0x80002000
+#define MM_ADDR_IO_PWM             0x80002040
+#define MM_ADDR_IO_VINTC           0x80003000
+#define MM_ADDR_IO_GPIO0           0x80004000
+#define MM_ADDR_IO_GPIO1           0x80004800
+#define MM_ADDR_IO_I2CS            0x80005000
+#define MM_ADDR_IO_SPIS            0x80006000
+#define MM_ADDR_IO_HPM             0x80007400
+#define MM_ADDR_IO_HPM_REMAP       0x80007800
+#define MM_ADDR_IO_TZPC            0x80008000
+#define MM_ADDR_IO_MPU             0x80009000
+#define MM_ADDR_IO_SPUMP           0x8000a000
+#define MM_ADDR_IO_PKA             0x8000b000
+#define MM_ADDR_IO_RNG             0x8000c000
+#define MM_ADDR_IO_KEYC            0x8000d000
+#define MM_ADDR_IO_BBL             0x8000e000
+#define MM_ADDR_IO_OTP             0x8000f000
+#define MM_ADDR_IO_I2S0            0x80010000
+#define MM_ADDR_IO_I2S1            0x80011000
+#define MM_ADDR_IO_UARTA           0x80012000
+#define MM_ADDR_IO_UARTB           0x80013000
+#define MM_ADDR_IO_I2CH            0x80014020
+#define MM_ADDR_IO_SPIH            0x80015000
+#define MM_ADDR_IO_TSC             0x80016000
+#define MM_ADDR_IO_TMR             0x80017000
+#define MM_ADDR_IO_WATCHDOG        0x80017800
+#define MM_ADDR_IO_ETM             0x80018000
+#define MM_ADDR_IO_DDRC            0x80019000
+#define MM_ADDR_IO_SINTC           0x80100000
+#define MM_ADDR_IO_INTC0           0x80200000
+#define MM_ADDR_IO_INTC1           0x80201000
+#define MM_ADDR_IO_GE              0x80300000
+#define MM_ADDR_IO_USB_CTLR0       0x80400000
+#define MM_ADDR_IO_USB_CTLR1       0x80410000
+#define MM_ADDR_IO_USB_PHY         0x80420000
+#define MM_ADDR_IO_SDIOH0          0x80500000
+#define MM_ADDR_IO_SDIOH1          0x80600000
+#define MM_ADDR_IO_VDEC            0x80700000
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /* _MM_ADDR_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/mm_io.h b/arch/arm/mach-bcmring/include/mach/csp/mm_io.h
new file mode 100644
index 00000000000..de92ec6a01a
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/mm_io.h
@@ -0,0 +1,147 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    mm_io.h
+*
+*  @brief   Memory Map I/O definitions
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+
+#ifndef _MM_IO_H
+#define _MM_IO_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <mach/csp/mm_addr.h>
+
+#if !defined(CSP_SIMULATION)
+#include <cfg_global.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+#if defined(CONFIG_MMU)
+
+/* This macro is referenced in <mach/io.h>
+ * Phys to Virtual 0xNyxxxxxx => 0xFNxxxxxx
+ * This macro is referenced in <asm/arch/io.h>
+ *
+ * Assume VPM address is the last x MB of memory.  For VPM, map to
+ * 0xf0000000 and up.
+ */
+
+#ifndef MM_IO_PHYS_TO_VIRT
+#ifdef __ASSEMBLY__
+#define MM_IO_PHYS_TO_VIRT(phys)       (0xF0000000 | (((phys) >> 4) & 0x0F000000) | ((phys) & 0xFFFFFF))
+#else
+#define MM_IO_PHYS_TO_VIRT(phys)       (((phys) == MM_ADDR_IO_VPM_EXTMEM_RSVD) ? 0xF0000000 : \
+			(0xF0000000 | (((phys) >> 4) & 0x0F000000) | ((phys) & 0xFFFFFF)))
+#endif
+#endif
+
+/* Virtual to Physical 0xFNxxxxxx => 0xN0xxxxxx */
+
+#ifndef MM_IO_VIRT_TO_PHYS
+#ifdef __ASSEMBLY__
+#define MM_IO_VIRT_TO_PHYS(virt)       ((((virt) & 0x0F000000) << 4) | ((virt) & 0xFFFFFF))
+#else
+#define MM_IO_VIRT_TO_PHYS(virt)       (((virt) == 0xF0000000) ? MM_ADDR_IO_VPM_EXTMEM_RSVD : \
+			((((virt) & 0x0F000000) << 4) | ((virt) & 0xFFFFFF)))
+#endif
+#endif
+
+#else
+
+#ifndef MM_IO_PHYS_TO_VIRT
+#define MM_IO_PHYS_TO_VIRT(phys)       (phys)
+#endif
+
+#ifndef MM_IO_VIRT_TO_PHYS
+#define MM_IO_VIRT_TO_PHYS(virt)       (virt)
+#endif
+
+#endif
+
+/* Registers in 0xExxxxxxx that should be moved to 0xFxxxxxxx */
+#define MM_IO_BASE_FLASHC              MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_FLASHC)
+#define MM_IO_BASE_NAND                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_NAND)
+#define MM_IO_BASE_UMI                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UMI)
+
+#define MM_IO_START MM_ADDR_IO_FLASHC	/* Physical beginning of IO mapped memory */
+#define MM_IO_BASE  MM_IO_BASE_FLASHC	/* Virtual beginning of IO mapped memory */
+
+#define MM_IO_BASE_BROM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_BROM)
+#define MM_IO_BASE_ARAM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ARAM)
+#define MM_IO_BASE_DMA0                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DMA0)
+#define MM_IO_BASE_DMA1                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DMA1)
+#define MM_IO_BASE_ESW                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ESW)
+#define MM_IO_BASE_CLCD                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_CLCD)
+#define MM_IO_BASE_PIF                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PIF)
+#define MM_IO_BASE_APM                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_APM)
+#define MM_IO_BASE_SPUM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPUM)
+#define MM_IO_BASE_VPM_PROG            MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_PROG)
+#define MM_IO_BASE_VPM_DATA            MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_DATA)
+
+#define MM_IO_BASE_VRAM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VRAM)
+
+#define MM_IO_BASE_CHIPC               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_CHIPC)
+#define MM_IO_BASE_DDRC                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DDRC)
+#define MM_IO_BASE_LEDM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_LEDM)
+#define MM_IO_BASE_PWM                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PWM)
+#define MM_IO_BASE_VINTC               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VINTC)
+#define MM_IO_BASE_GPIO0               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GPIO0)
+#define MM_IO_BASE_GPIO1               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GPIO1)
+#define MM_IO_BASE_TMR                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TMR)
+#define MM_IO_BASE_WATCHDOG            MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_WATCHDOG)
+#define MM_IO_BASE_ETM                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ETM)
+#define MM_IO_BASE_HPM                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_HPM)
+#define MM_IO_BASE_HPM_REMAP           MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_HPM_REMAP)
+#define MM_IO_BASE_TZPC                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TZPC)
+#define MM_IO_BASE_MPU                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_MPU)
+#define MM_IO_BASE_SPUMP               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPUMP)
+#define MM_IO_BASE_PKA                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PKA)
+#define MM_IO_BASE_RNG                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_RNG)
+#define MM_IO_BASE_KEYC                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_KEYC)
+#define MM_IO_BASE_BBL                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_BBL)
+#define MM_IO_BASE_OTP                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_OTP)
+#define MM_IO_BASE_I2S0                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2S0)
+#define MM_IO_BASE_I2S1                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2S1)
+#define MM_IO_BASE_UARTA               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UARTA)
+#define MM_IO_BASE_UARTB               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UARTB)
+#define MM_IO_BASE_I2CH                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2CH)
+#define MM_IO_BASE_SPIH                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPIH)
+#define MM_IO_BASE_TSC                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TSC)
+#define MM_IO_BASE_I2CS                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2CS)
+#define MM_IO_BASE_SPIS                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPIS)
+#define MM_IO_BASE_SINTC               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SINTC)
+#define MM_IO_BASE_INTC0               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_INTC0)
+#define MM_IO_BASE_INTC1               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_INTC1)
+#define MM_IO_BASE_GE                  MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GE)
+#define MM_IO_BASE_USB_CTLR0           MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_CTLR0)
+#define MM_IO_BASE_USB_CTLR1           MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_CTLR1)
+#define MM_IO_BASE_USB_PHY             MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_PHY)
+#define MM_IO_BASE_SDIOH0              MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SDIOH0)
+#define MM_IO_BASE_SDIOH1              MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SDIOH1)
+#define MM_IO_BASE_VDEC                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VDEC)
+
+#define MM_IO_BASE_VPM_EXTMEM_RSVD     MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_EXTMEM_RSVD)
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /* _MM_IO_H */
diff --git a/arch/arm/mach-bcmring/include/mach/memory.h b/arch/arm/mach-bcmring/include/mach/memory.h
new file mode 100644
index 00000000000..114f942bb4f
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/memory.h
@@ -0,0 +1,33 @@
+/*****************************************************************************
+* Copyright 2005 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <cfg_global.h>
+
+/*
+ * Physical vs virtual RAM address space conversion.  These are
+ * private definitions which should NOT be used outside memory.h
+ * files.  Use virt_to_phys/phys_to_virt/__pa/__va instead.
+ */
+
+#define PHYS_OFFSET CFG_GLOBAL_RAM_BASE
+
+/*
+ * Maximum DMA memory allowed is 14M
+ */
+#define CONSISTENT_DMA_SIZE (SZ_16M - SZ_2M)
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/memory_settings.h b/arch/arm/mach-bcmring/include/mach/memory_settings.h
new file mode 100644
index 00000000000..ce5cd16f2ac
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/memory_settings.h
@@ -0,0 +1,67 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef MEMORY_SETTINGS_H
+#define MEMORY_SETTINGS_H
+
+/* ---- Include Files ---------------------------------------- */
+/* ---- Constants and Types ---------------------------------- */
+
+/* Memory devices */
+/* NAND Flash timing for 166 MHz setting */
+#define HW_CFG_NAND_tBTA  (5 << 16)	/* Bus turnaround cycle (n)        0-7  (30 ns) */
+#define HW_CFG_NAND_tWP   (4 << 11)	/* Write pulse width cycle (n+1)   0-31 (25 ns) */
+#define HW_CFG_NAND_tWR   (1 << 9)	/* Write recovery cycle (n+1)      0-3  (10 ns) */
+#define HW_CFG_NAND_tAS   (0 << 7)	/* Write address setup cycle (n+1) 0-3  ( 0 ns) */
+#define HW_CFG_NAND_tOE   (3 << 5)	/* Output enable delay cycle (n)   0-3  (15 ns) */
+#define HW_CFG_NAND_tRC   (7 << 0)	/* Read access cycle (n+2)         0-31 (50 ns) */
+
+#define HW_CFG_NAND_TCR (HW_CFG_NAND_tBTA \
+	| HW_CFG_NAND_tWP  \
+	| HW_CFG_NAND_tWR  \
+	| HW_CFG_NAND_tAS  \
+	| HW_CFG_NAND_tOE  \
+	| HW_CFG_NAND_tRC)
+
+/* NOR Flash timing for 166 MHz setting */
+#define HW_CFG_NOR_TPRC_TWLC (0 << 19)	/* Page read access cycle / Burst write latency (n+2 / n+1) (max 25ns) */
+#define HW_CFG_NOR_TBTA      (0 << 16)	/* Bus turnaround cycle (n)                                 (DNA)      */
+#define HW_CFG_NOR_TWP       (6 << 11)	/* Write pulse width cycle (n+1)                            (35ns)     */
+#define HW_CFG_NOR_TWR       (0 << 9)	/* Write recovery cycle (n+1)                               (0ns)      */
+#define HW_CFG_NOR_TAS       (0 << 7)	/* Write address setup cycle (n+1)                          (0ns)      */
+#define HW_CFG_NOR_TOE       (0 << 5)	/* Output enable delay cycle (n)                            (max 25ns) */
+#define HW_CFG_NOR_TRC_TLC   (0x10 << 0)	/* Read access cycle / Burst read latency (n+2 / n+1)       (100ns)    */
+
+#define HW_CFG_FLASH0_TCR (HW_CFG_NOR_TPRC_TWLC \
+	| HW_CFG_NOR_TBTA      \
+	| HW_CFG_NOR_TWP       \
+	| HW_CFG_NOR_TWR       \
+	| HW_CFG_NOR_TAS       \
+	| HW_CFG_NOR_TOE       \
+	| HW_CFG_NOR_TRC_TLC)
+
+#define HW_CFG_FLASH1_TCR    HW_CFG_FLASH0_TCR
+#define HW_CFG_FLASH2_TCR    HW_CFG_FLASH0_TCR
+
+/* SDRAM Settings */
+/* #define HW_CFG_SDRAM_CAS_LATENCY        5    Default 5, Values [3..6] */
+/* #define HW_CFG_SDRAM_CHIP_SELECT_CNT    1    Default 1, Vaules [1..2] */
+/* #define HW_CFG_SDRAM_SPEED_GRADE        667  Default 667, Values [400,533,667,800] */
+/* #define HW_CFG_SDRAM_WIDTH_BITS         16   Default 16, Vaules [8,16] */
+#define HW_CFG_SDRAM_SIZE_BYTES         0x10000000	/* Total memory, not per device size */
+
+/* ---- Variable Externs ------------------------------------- */
+/* ---- Function Prototypes ---------------------------------- */
+
+#endif /* MEMORY_SETTINGS_H */
diff --git a/arch/arm/mach-bcmring/include/mach/vmalloc.h b/arch/arm/mach-bcmring/include/mach/vmalloc.h
new file mode 100644
index 00000000000..35e2ead8395
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/vmalloc.h
@@ -0,0 +1,25 @@
+/*
+ *
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * Move VMALLOC_END to 0xf0000000 so that the vm space can range from
+ * 0xe0000000 to 0xefffffff. This gives us 256 MB of vm space and handles
+ * larger physical memory designs better.
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x30000000)
diff --git a/arch/arm/mach-bcmring/mm.c b/arch/arm/mach-bcmring/mm.c
new file mode 100644
index 00000000000..0f1c37e4523
--- /dev/null
+++ b/arch/arm/mach-bcmring/mm.c
@@ -0,0 +1,56 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#include <linux/platform_device.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/csp/mm_io.h>
+
+#define IO_DESC(va, sz) { .virtual = va, \
+	.pfn = __phys_to_pfn(HW_IO_VIRT_TO_PHYS(va)), \
+	.length = sz, \
+	.type = MT_DEVICE }
+
+#define MEM_DESC(va, sz) { .virtual = va, \
+	.pfn = __phys_to_pfn(HW_IO_VIRT_TO_PHYS(va)), \
+	.length = sz, \
+	.type = MT_MEMORY }
+
+static struct map_desc bcmring_io_desc[] __initdata = {
+	IO_DESC(MM_IO_BASE_NAND, SZ_64K),	/* phys:0x28000000-0x28000FFF  virt:0xE8000000-0xE8000FFF  size:0x00010000 */
+	IO_DESC(MM_IO_BASE_UMI, SZ_64K),	/* phys:0x2C000000-0x2C000FFF  virt:0xEC000000-0xEC000FFF  size:0x00010000 */
+
+	IO_DESC(MM_IO_BASE_BROM, SZ_64K),	/* phys:0x30000000-0x3000FFFF  virt:0xF3000000-0xF300FFFF  size:0x00010000 */
+	MEM_DESC(MM_IO_BASE_ARAM, SZ_1M),	/* phys:0x31000000-0x31FFFFFF  virt:0xF3100000-0xF31FFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_DMA0, SZ_1M),	/* phys:0x32000000-0x32FFFFFF  virt:0xF3200000-0xF32FFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_DMA1, SZ_1M),	/* phys:0x33000000-0x33FFFFFF  virt:0xF3300000-0xF33FFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_ESW, SZ_1M),	/* phys:0x34000000-0x34FFFFFF  virt:0xF3400000-0xF34FFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_CLCD, SZ_1M),	/* phys:0x35000000-0x35FFFFFF  virt:0xF3500000-0xF35FFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_APM, SZ_1M),	/* phys:0x36000000-0x36FFFFFF  virt:0xF3600000-0xF36FFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_SPUM, SZ_1M),	/* phys:0x37000000-0x37FFFFFF  virt:0xF3700000-0xF37FFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_VPM_PROG, SZ_1M),	/* phys:0x38000000-0x38FFFFFF  virt:0xF3800000-0xF38FFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_VPM_DATA, SZ_1M),	/* phys:0x3A000000-0x3AFFFFFF  virt:0xF3A00000-0xF3AFFFFF  size:0x01000000 */
+
+	IO_DESC(MM_IO_BASE_VRAM, SZ_64K),	/* phys:0x40000000-0x4000FFFF  virt:0xF4000000-0xF400FFFF  size:0x00010000 */
+	IO_DESC(MM_IO_BASE_CHIPC, SZ_16M),	/* phys:0x80000000-0x80FFFFFF  virt:0xF8000000-0xF8FFFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_VPM_EXTMEM_RSVD,
+		SZ_16M),	/* phys:0x0F000000-0x0FFFFFFF  virt:0xF0000000-0xF0FFFFFF  size:0x01000000 */
+};
+
+void __init bcmring_map_io(void)
+{
+
+	iotable_init(bcmring_io_desc, ARRAY_SIZE(bcmring_io_desc));
+}
-- 
cgit v1.2.3


From 7c4c2951c0077eecf9a9dfda59a43eedd09a01f4 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:00:39 +0100
Subject: ARM: 5647/1: bcmring: add bcmring dma.h and dma_device.c

add bcmring dma.h and dma_device.c

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/dma_device.c       | 593 ++++++++++++++++++++++
 arch/arm/mach-bcmring/include/mach/dma.h | 826 +++++++++++++++++++++++++++++++
 2 files changed, 1419 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/dma_device.c
 create mode 100644 arch/arm/mach-bcmring/include/mach/dma.h

(limited to 'arch/arm')

diff --git a/arch/arm/mach-bcmring/dma_device.c b/arch/arm/mach-bcmring/dma_device.c
new file mode 100644
index 00000000000..ca0ad736870
--- /dev/null
+++ b/arch/arm/mach-bcmring/dma_device.c
@@ -0,0 +1,593 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*   @file   dma_device.c
+*
+*   @brief  private array of DMA_DeviceAttribute_t
+*/
+/****************************************************************************/
+
+DMA_DeviceAttribute_t DMA_gDeviceAttribute[DMA_NUM_DEVICE_ENTRIES] = {
+	[DMA_DEVICE_MEM_TO_MEM] =	/* MEM 2 MEM */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "mem-to-mem",
+	 .config = {
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+
+		    },
+	 },
+	[DMA_DEVICE_VPM_MEM_TO_MEM] =	/* VPM */
+	{
+	 .flags = DMA_DEVICE_FLAG_IS_DEDICATED | DMA_DEVICE_FLAG_NO_ISR,
+	 .name = "vpm",
+	 .dedicatedController = 0,
+	 .dedicatedChannel = 0,
+	 /* reserve DMA0:0 for VPM */
+	 },
+	[DMA_DEVICE_NAND_MEM_TO_MEM] =	/* NAND */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "nand",
+	 .config = {
+		    .srcPeripheralPort = 0,
+		    .dstPeripheralPort = 0,
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_6,
+		    },
+	 },
+	[DMA_DEVICE_PIF_MEM_TO_DEV] =	/* PIF TX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1
+	 | DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO
+	 | DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST | DMA_DEVICE_FLAG_PORT_PER_DMAC,
+	 .name = "pif_tx",
+	 .dmacPort = {14, 5},
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    /* dstPeripheralPort          = 5 or 14 */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+		    .maxDataPerBlock = 16256,
+		    },
+	 },
+	[DMA_DEVICE_PIF_DEV_TO_MEM] =	/* PIF RX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1
+	 | DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO
+	 /* DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST */
+	 | DMA_DEVICE_FLAG_PORT_PER_DMAC,
+	 .name = "pif_rx",
+	 .dmacPort = {14, 5},
+	 .config = {
+		    /* srcPeripheralPort          = 5 or 14 */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+		    .maxDataPerBlock = 16256,
+		    },
+	 },
+	[DMA_DEVICE_I2S0_DEV_TO_MEM] =	/* I2S RX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
+	 .name = "i2s0_rx",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: I2S0 */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0,
+		    .dstStatusRegisterAddress = 0,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_16,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+		    },
+	 },
+	[DMA_DEVICE_I2S0_MEM_TO_DEV] =	/* I2S TX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
+	 .name = "i2s0_tx",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .dstPeripheralPort = 1,	/* DST: I2S0 */
+		    .srcStatusRegisterAddress = 0,
+		    .dstStatusRegisterAddress = 0,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_16,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    },
+	 },
+	[DMA_DEVICE_I2S1_DEV_TO_MEM] =	/* I2S1 RX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "i2s1_rx",
+	 .config = {
+		    .srcPeripheralPort = 2,	/* SRC: I2S1 */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0,
+		    .dstStatusRegisterAddress = 0,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_16,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+		    },
+	 },
+	[DMA_DEVICE_I2S1_MEM_TO_DEV] =	/* I2S1 TX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "i2s1_tx",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .dstPeripheralPort = 3,	/* DST: I2S1 */
+		    .srcStatusRegisterAddress = 0,
+		    .dstStatusRegisterAddress = 0,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_16,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    },
+	 },
+	[DMA_DEVICE_ESW_MEM_TO_DEV] =	/* ESW TX */
+	{
+	 .name = "esw_tx",
+	 .flags = DMA_DEVICE_FLAG_IS_DEDICATED,
+	 .dedicatedController = 1,
+	 .dedicatedChannel = 3,
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .dstPeripheralPort = 1,	/* DST: ESW (MTP) */
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    /* DMAx_AHB_SSTATARy */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    /* DMAx_AHB_DSTATARy */
+		    .dstStatusRegisterAddress = 0x30490010,
+		    /* DMAx_AHB_CFGy */
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    /* DMAx_AHB_CTLy */
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    },
+	 },
+	[DMA_DEVICE_ESW_DEV_TO_MEM] =	/* ESW RX */
+	{
+	 .name = "esw_rx",
+	 .flags = DMA_DEVICE_FLAG_IS_DEDICATED,
+	 .dedicatedController = 1,
+	 .dedicatedChannel = 2,
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: ESW (PTM) */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    /* DMAx_AHB_SSTATARy */
+		    .srcStatusRegisterAddress = 0x30480010,
+		    /* DMAx_AHB_DSTATARy */
+		    .dstStatusRegisterAddress = 0x00000000,
+		    /* DMAx_AHB_CFGy */
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    /* DMAx_AHB_CTLy */
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    },
+	 },
+	[DMA_DEVICE_APM_CODEC_A_DEV_TO_MEM] =	/* APM Codec A Ingress */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
+	 .name = "apm_a_rx",
+	 .config = {
+		    .srcPeripheralPort = 2,	/* SRC: Codec A Ingress FIFO */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+		    },
+	 },
+	[DMA_DEVICE_APM_CODEC_A_MEM_TO_DEV] =	/* APM Codec A Egress */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
+	 .name = "apm_a_tx",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .dstPeripheralPort = 3,	/* DST: Codec A Egress FIFO */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    },
+	 },
+	[DMA_DEVICE_APM_CODEC_B_DEV_TO_MEM] =	/* APM Codec B Ingress */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
+	 .name = "apm_b_rx",
+	 .config = {
+		    .srcPeripheralPort = 4,	/* SRC: Codec B Ingress FIFO */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+		    },
+	 },
+	[DMA_DEVICE_APM_CODEC_B_MEM_TO_DEV] =	/* APM Codec B Egress */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
+	 .name = "apm_b_tx",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .dstPeripheralPort = 5,	/* DST: Codec B Egress FIFO */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    },
+	 },
+	[DMA_DEVICE_APM_CODEC_C_DEV_TO_MEM] =	/* APM Codec C Ingress */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "apm_c_rx",
+	 .config = {
+		    .srcPeripheralPort = 4,	/* SRC: Codec C Ingress FIFO */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+		    },
+	 },
+	[DMA_DEVICE_APM_PCM0_DEV_TO_MEM] =	/* PCM0 RX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
+	 .name = "pcm0_rx",
+	 .config = {
+		    .srcPeripheralPort = 12,	/* SRC: PCM0 */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0,
+		    .dstStatusRegisterAddress = 0,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+		    },
+	 },
+	[DMA_DEVICE_APM_PCM0_MEM_TO_DEV] =	/* PCM0 TX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
+	 .name = "pcm0_tx",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .dstPeripheralPort = 13,	/* DST: PCM0 */
+		    .srcStatusRegisterAddress = 0,
+		    .dstStatusRegisterAddress = 0,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    },
+	 },
+	[DMA_DEVICE_APM_PCM1_DEV_TO_MEM] =	/* PCM1 RX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "pcm1_rx",
+	 .config = {
+		    .srcPeripheralPort = 14,	/* SRC: PCM1 */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0,
+		    .dstStatusRegisterAddress = 0,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+		    },
+	 },
+	[DMA_DEVICE_APM_PCM1_MEM_TO_DEV] =	/* PCM1 TX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "pcm1_tx",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .dstPeripheralPort = 15,	/* DST: PCM1 */
+		    .srcStatusRegisterAddress = 0,
+		    .dstStatusRegisterAddress = 0,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    },
+	 },
+	[DMA_DEVICE_SPUM_DEV_TO_MEM] =	/* SPUM RX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "spum_rx",
+	 .config = {
+		    .srcPeripheralPort = 6,	/* SRC: Codec A Ingress FIFO */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+		    /* Busrt size **MUST** be 16 for SPUM to work */
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_16,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_16,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    /* on the RX side, SPU needs to be the flow controller */
+		    .flowControler = dmacHw_FLOW_CONTROL_PERIPHERAL,
+		    },
+	 },
+	[DMA_DEVICE_SPUM_MEM_TO_DEV] =	/* SPUM TX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "spum_tx",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .dstPeripheralPort = 7,	/* DST: SPUM */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+		    /* Busrt size **MUST** be 16 for SPUM to work */
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_16,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_16,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    },
+	 },
+	[DMA_DEVICE_MEM_TO_VRAM] =	/* MEM 2 VRAM */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "mem-to-vram",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+		    },
+	 },
+	[DMA_DEVICE_VRAM_TO_MEM] =	/* VRAM 2 MEM */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "vram-to-mem",
+	 .config = {
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+		    },
+	 },
+};
+EXPORT_SYMBOL(DMA_gDeviceAttribute);	/* primarily for dma-test.c */
diff --git a/arch/arm/mach-bcmring/include/mach/dma.h b/arch/arm/mach-bcmring/include/mach/dma.h
new file mode 100644
index 00000000000..847980c85c8
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/dma.h
@@ -0,0 +1,826 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*   @file   dma.h
+*
+*   @brief  API definitions for the linux DMA interface.
+*/
+/****************************************************************************/
+
+#if !defined(ASM_ARM_ARCH_BCMRING_DMA_H)
+#define ASM_ARM_ARCH_BCMRING_DMA_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <linux/kernel.h>
+#include <linux/wait.h>
+#include <linux/semaphore.h>
+#include <csp/dmacHw.h>
+#include <mach/timer.h>
+#include <linux/scatterlist.h>
+#include <linux/dma-mapping.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/pagemap.h>
+
+/* ---- Constants and Types ---------------------------------------------- */
+
+/* If DMA_DEBUG_TRACK_RESERVATION is set to a non-zero value, then the filename */
+/* and line number of the reservation request will be recorded in the channel table */
+
+#define DMA_DEBUG_TRACK_RESERVATION   1
+
+#define DMA_NUM_CONTROLLERS     2
+#define DMA_NUM_CHANNELS        8	/* per controller */
+
+typedef enum {
+	DMA_DEVICE_MEM_TO_MEM,	/* For memory to memory transfers */
+	DMA_DEVICE_I2S0_DEV_TO_MEM,
+	DMA_DEVICE_I2S0_MEM_TO_DEV,
+	DMA_DEVICE_I2S1_DEV_TO_MEM,
+	DMA_DEVICE_I2S1_MEM_TO_DEV,
+	DMA_DEVICE_APM_CODEC_A_DEV_TO_MEM,
+	DMA_DEVICE_APM_CODEC_A_MEM_TO_DEV,
+	DMA_DEVICE_APM_CODEC_B_DEV_TO_MEM,
+	DMA_DEVICE_APM_CODEC_B_MEM_TO_DEV,
+	DMA_DEVICE_APM_CODEC_C_DEV_TO_MEM,	/* Additional mic input for beam-forming */
+	DMA_DEVICE_APM_PCM0_DEV_TO_MEM,
+	DMA_DEVICE_APM_PCM0_MEM_TO_DEV,
+	DMA_DEVICE_APM_PCM1_DEV_TO_MEM,
+	DMA_DEVICE_APM_PCM1_MEM_TO_DEV,
+	DMA_DEVICE_SPUM_DEV_TO_MEM,
+	DMA_DEVICE_SPUM_MEM_TO_DEV,
+	DMA_DEVICE_SPIH_DEV_TO_MEM,
+	DMA_DEVICE_SPIH_MEM_TO_DEV,
+	DMA_DEVICE_UART_A_DEV_TO_MEM,
+	DMA_DEVICE_UART_A_MEM_TO_DEV,
+	DMA_DEVICE_UART_B_DEV_TO_MEM,
+	DMA_DEVICE_UART_B_MEM_TO_DEV,
+	DMA_DEVICE_PIF_MEM_TO_DEV,
+	DMA_DEVICE_PIF_DEV_TO_MEM,
+	DMA_DEVICE_ESW_DEV_TO_MEM,
+	DMA_DEVICE_ESW_MEM_TO_DEV,
+	DMA_DEVICE_VPM_MEM_TO_MEM,
+	DMA_DEVICE_CLCD_MEM_TO_MEM,
+	DMA_DEVICE_NAND_MEM_TO_MEM,
+	DMA_DEVICE_MEM_TO_VRAM,
+	DMA_DEVICE_VRAM_TO_MEM,
+
+	/* Add new entries before this line. */
+
+	DMA_NUM_DEVICE_ENTRIES,
+	DMA_DEVICE_NONE = 0xff,	/* Special value to indicate that no device is currently assigned. */
+
+} DMA_Device_t;
+
+/****************************************************************************
+*
+*   The DMA_Handle_t is the primary object used by callers of the API.
+*
+*****************************************************************************/
+
+#define DMA_INVALID_HANDLE  ((DMA_Handle_t) -1)
+
+typedef int DMA_Handle_t;
+
+/****************************************************************************
+*
+*   The DMA_DescriptorRing_t contains a ring of descriptors which is used
+*   to point to regions of memory.
+*
+*****************************************************************************/
+
+typedef struct {
+	void *virtAddr;		/* Virtual Address of the descriptor ring */
+	dma_addr_t physAddr;	/* Physical address of the descriptor ring */
+	int descriptorsAllocated;	/* Number of descriptors allocated in the descriptor ring */
+	size_t bytesAllocated;	/* Number of bytes allocated in the descriptor ring */
+
+} DMA_DescriptorRing_t;
+
+/****************************************************************************
+*
+*   The DMA_MemType_t and DMA_MemMap_t are helper structures used to setup
+*   DMA chains from a variety of memory sources.
+*
+*****************************************************************************/
+
+#define DMA_MEM_MAP_MIN_SIZE    4096	/* Pages less than this size are better */
+					/* off not being DMA'd. */
+
+typedef enum {
+	DMA_MEM_TYPE_NONE,	/* Not a valid setting */
+	DMA_MEM_TYPE_VMALLOC,	/* Memory came from vmalloc call */
+	DMA_MEM_TYPE_KMALLOC,	/* Memory came from kmalloc call */
+	DMA_MEM_TYPE_DMA,	/* Memory came from dma_alloc_xxx call */
+	DMA_MEM_TYPE_USER,	/* Memory came from user space. */
+
+} DMA_MemType_t;
+
+/* A segment represents a physically and virtually contiguous chunk of memory. */
+/* i.e. each segment can be DMA'd */
+/* A user of the DMA code will add memory regions. Each region may need to be */
+/* represented by one or more segments. */
+
+typedef struct {
+	void *virtAddr;		/* Virtual address used for this segment */
+	dma_addr_t physAddr;	/* Physical address this segment maps to */
+	size_t numBytes;	/* Size of the segment, in bytes */
+
+} DMA_Segment_t;
+
+/* A region represents a virtually contiguous chunk of memory, which may be */
+/* made up of multiple segments. */
+
+typedef struct {
+	DMA_MemType_t memType;
+	void *virtAddr;
+	size_t numBytes;
+
+	/* Each region (virtually contiguous) consists of one or more segments. Each */
+	/* segment is virtually and physically contiguous. */
+
+	int numSegmentsUsed;
+	int numSegmentsAllocated;
+	DMA_Segment_t *segment;
+
+	/* When a region corresponds to user memory, we need to lock all of the pages */
+	/* down before we can figure out the physical addresses. The lockedPage array contains */
+	/* the pages that were locked, and which subsequently need to be unlocked once the */
+	/* memory is unmapped. */
+
+	unsigned numLockedPages;
+	struct page **lockedPages;
+
+} DMA_Region_t;
+
+typedef struct {
+	int inUse;		/* Is this mapping currently being used? */
+	struct semaphore lock;	/* Acquired when using this structure */
+	enum dma_data_direction dir;	/* Direction this transfer is intended for */
+
+	/* In the event that we're mapping user memory, we need to know which task */
+	/* the memory is for, so that we can obtain the correct mm locks. */
+
+	struct task_struct *userTask;
+
+	int numRegionsUsed;
+	int numRegionsAllocated;
+	DMA_Region_t *region;
+
+} DMA_MemMap_t;
+
+/****************************************************************************
+*
+*   The DMA_DeviceAttribute_t contains information which describes a
+*   particular DMA device (or peripheral).
+*
+*   It is anticipated that the arrary of DMA_DeviceAttribute_t's will be
+*   statically initialized.
+*
+*****************************************************************************/
+
+/* The device handler is called whenever a DMA operation completes. The reaon */
+/* for it to be called will be a bitmask with one or more of the following bits */
+/* set. */
+
+#define DMA_HANDLER_REASON_BLOCK_COMPLETE       dmacHw_INTERRUPT_STATUS_BLOCK
+#define DMA_HANDLER_REASON_TRANSFER_COMPLETE    dmacHw_INTERRUPT_STATUS_TRANS
+#define DMA_HANDLER_REASON_ERROR                dmacHw_INTERRUPT_STATUS_ERROR
+
+typedef void (*DMA_DeviceHandler_t) (DMA_Device_t dev, int reason,
+				     void *userData);
+
+#define DMA_DEVICE_FLAG_ON_DMA0             0x00000001
+#define DMA_DEVICE_FLAG_ON_DMA1             0x00000002
+#define DMA_DEVICE_FLAG_PORT_PER_DMAC       0x00000004	/* If set, it means that the port used on DMAC0 is different from the port used on DMAC1 */
+#define DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST    0x00000008	/* If set, allocate from DMA1 before allocating from DMA0 */
+#define DMA_DEVICE_FLAG_IS_DEDICATED        0x00000100
+#define DMA_DEVICE_FLAG_NO_ISR              0x00000200
+#define DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO    0x00000400
+#define DMA_DEVICE_FLAG_IN_USE              0x00000800	/* If set, device is in use on a channel */
+
+/* Note: Some DMA devices can be used from multiple DMA Controllers. The bitmask is used to */
+/*       determine which DMA controllers a given device can be used from, and the interface */
+/*       array determeines the actual interface number to use for a given controller. */
+
+typedef struct {
+	uint32_t flags;		/* Bitmask of DMA_DEVICE_FLAG_xxx constants */
+	uint8_t dedicatedController;	/* Controller number to use if DMA_DEVICE_FLAG_IS_DEDICATED is set. */
+	uint8_t dedicatedChannel;	/* Channel number to use if DMA_DEVICE_FLAG_IS_DEDICATED is set. */
+	const char *name;	/* Will show up in the /proc entry */
+
+	uint32_t dmacPort[DMA_NUM_CONTROLLERS];	/* Specifies the port number when DMA_DEVICE_FLAG_PORT_PER_DMAC flag is set */
+
+	dmacHw_CONFIG_t config;	/* Configuration to use when DMA'ing using this device */
+
+	void *userData;		/* Passed to the devHandler */
+	DMA_DeviceHandler_t devHandler;	/* Called when DMA operations finish. */
+
+	timer_tick_count_t transferStartTime;	/* Time the current transfer was started */
+
+	/* The following statistical information will be collected and presented in a proc entry. */
+	/* Note: With a contiuous bandwidth of 1 Gb/sec, it would take 584 years to overflow */
+	/*       a 64 bit counter. */
+
+	uint64_t numTransfers;	/* Number of DMA transfers performed */
+	uint64_t transferTicks;	/* Total time spent doing DMA transfers (measured in timer_tick_count_t's) */
+	uint64_t transferBytes;	/* Total bytes transferred */
+	uint32_t timesBlocked;	/* Number of times a channel was unavailable */
+	uint32_t numBytes;	/* Last transfer size */
+
+	/* It's not possible to free memory which is allocated for the descriptors from within */
+	/* the ISR. So make the presumption that a given device will tend to use the */
+	/* same sized buffers over and over again, and we keep them around. */
+
+	DMA_DescriptorRing_t ring;	/* Ring of descriptors allocated for this device */
+
+	/* We stash away some of the information from the previous transfer. If back-to-back */
+	/* transfers are performed from the same buffer, then we don't have to keep re-initializing */
+	/* the descriptor buffers. */
+
+	uint32_t prevNumBytes;
+	dma_addr_t prevSrcData;
+	dma_addr_t prevDstData;
+
+} DMA_DeviceAttribute_t;
+
+/****************************************************************************
+*
+*   DMA_Channel_t, DMA_Controller_t, and DMA_State_t are really internal
+*   data structures and don't belong in this header file, but are included
+*   merely for discussion.
+*
+*   By the time this is implemented, these structures will be moved out into
+*   the appropriate C source file instead.
+*
+*****************************************************************************/
+
+/****************************************************************************
+*
+*   The DMA_Channel_t contains state information about each DMA channel. Some
+*   of the channels are dedicated. Non-dedicated channels are shared
+*   amongst the other devices.
+*
+*****************************************************************************/
+
+#define DMA_CHANNEL_FLAG_IN_USE         0x00000001
+#define DMA_CHANNEL_FLAG_IS_DEDICATED   0x00000002
+#define DMA_CHANNEL_FLAG_NO_ISR         0x00000004
+#define DMA_CHANNEL_FLAG_LARGE_FIFO     0x00000008
+
+typedef struct {
+	uint32_t flags;		/* bitmask of DMA_CHANNEL_FLAG_xxx constants */
+	DMA_Device_t devType;	/* Device this channel is currently reserved for */
+	DMA_Device_t lastDevType;	/* Device type that used this previously */
+	char name[20];		/* Name passed onto request_irq */
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+	const char *fileName;	/* Place where channel reservation took place */
+	int lineNum;		/* Place where channel reservation took place */
+#endif
+	dmacHw_HANDLE_t dmacHwHandle;	/* low level channel handle. */
+
+} DMA_Channel_t;
+
+/****************************************************************************
+*
+*   The DMA_Controller_t contains state information about each DMA controller.
+*
+*   The freeChannelQ is stored in the controller data structure rather than
+*   the channel data structure since several of the devices are accessible
+*   from multiple controllers, and there is no way to know which controller
+*   will become available first.
+*
+*****************************************************************************/
+
+typedef struct {
+	DMA_Channel_t channel[DMA_NUM_CHANNELS];
+
+} DMA_Controller_t;
+
+/****************************************************************************
+*
+*   The DMA_Global_t contains all of the global state information used by
+*   the DMA code.
+*
+*   Callers which need to allocate a shared channel will be queued up
+*   on the freeChannelQ until a channel becomes available.
+*
+*****************************************************************************/
+
+typedef struct {
+	struct semaphore lock;	/* acquired when manipulating table entries */
+	wait_queue_head_t freeChannelQ;
+
+	DMA_Controller_t controller[DMA_NUM_CONTROLLERS];
+
+} DMA_Global_t;
+
+/* ---- Variable Externs ------------------------------------------------- */
+
+extern DMA_DeviceAttribute_t DMA_gDeviceAttribute[DMA_NUM_DEVICE_ENTRIES];
+
+/* ---- Function Prototypes ---------------------------------------------- */
+
+#if defined(__KERNEL__)
+
+/****************************************************************************/
+/**
+*   Initializes the DMA module.
+*
+*   @return
+*       0       - Success
+*       < 0     - Error
+*/
+/****************************************************************************/
+
+int dma_init(void);
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+DMA_Handle_t dma_request_channel_dbg(DMA_Device_t dev, const char *fileName,
+				     int lineNum);
+#define dma_request_channel(dev)  dma_request_channel_dbg(dev, __FILE__, __LINE__)
+#else
+
+/****************************************************************************/
+/**
+*   Reserves a channel for use with @a dev. If the device is setup to use
+*   a shared channel, then this function will block until a free channel
+*   becomes available.
+*
+*   @return
+*       >= 0    - A valid DMA Handle.
+*       -EBUSY  - Device is currently being used.
+*       -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+DMA_Handle_t dma_request_channel(DMA_Device_t dev	/* Device to use with the allocated channel. */
+    );
+#endif
+
+/****************************************************************************/
+/**
+*   Frees a previously allocated DMA Handle.
+*
+*   @return
+*        0      - DMA Handle was released successfully.
+*       -EINVAL - Invalid DMA handle
+*/
+/****************************************************************************/
+
+int dma_free_channel(DMA_Handle_t channel	/* DMA handle. */
+    );
+
+/****************************************************************************/
+/**
+*   Determines if a given device has been configured as using a shared
+*   channel.
+*
+*   @return boolean
+*       0           Device uses a dedicated channel
+*       non-zero    Device uses a shared channel
+*/
+/****************************************************************************/
+
+int dma_device_is_channel_shared(DMA_Device_t dev	/* Device to check. */
+    );
+
+/****************************************************************************/
+/**
+*   Allocates memory to hold a descriptor ring. The descriptor ring then
+*   needs to be populated by making one or more calls to
+*   dna_add_descriptors.
+*
+*   The returned descriptor ring will be automatically initialized.
+*
+*   @return
+*       0           Descriptor ring was allocated successfully
+*       -ENOMEM     Unable to allocate memory for the desired number of descriptors.
+*/
+/****************************************************************************/
+
+int dma_alloc_descriptor_ring(DMA_DescriptorRing_t *ring,	/* Descriptor ring to populate */
+			      int numDescriptors	/* Number of descriptors that need to be allocated. */
+    );
+
+/****************************************************************************/
+/**
+*   Releases the memory which was previously allocated for a descriptor ring.
+*/
+/****************************************************************************/
+
+void dma_free_descriptor_ring(DMA_DescriptorRing_t *ring	/* Descriptor to release */
+    );
+
+/****************************************************************************/
+/**
+*   Initializes a descriptor ring, so that descriptors can be added to it.
+*   Once a descriptor ring has been allocated, it may be reinitialized for
+*   use with additional/different regions of memory.
+*
+*   Note that if 7 descriptors are allocated, it's perfectly acceptable to
+*   initialize the ring with a smaller number of descriptors. The amount
+*   of memory allocated for the descriptor ring will not be reduced, and
+*   the descriptor ring may be reinitialized later
+*
+*   @return
+*       0           Descriptor ring was initialized successfully
+*       -ENOMEM     The descriptor which was passed in has insufficient space
+*                   to hold the desired number of descriptors.
+*/
+/****************************************************************************/
+
+int dma_init_descriptor_ring(DMA_DescriptorRing_t *ring,	/* Descriptor ring to initialize */
+			     int numDescriptors	/* Number of descriptors to initialize. */
+    );
+
+/****************************************************************************/
+/**
+*   Determines the number of descriptors which would be required for a
+*   transfer of the indicated memory region.
+*
+*   This function also needs to know which DMA device this transfer will
+*   be destined for, so that the appropriate DMA configuration can be retrieved.
+*   DMA parameters such as transfer width, and whether this is a memory-to-memory
+*   or memory-to-peripheral, etc can all affect the actual number of descriptors
+*   required.
+*
+*   @return
+*       > 0     Returns the number of descriptors required for the indicated transfer
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_calculate_descriptor_count(DMA_Device_t device,	/* DMA Device that this will be associated with */
+				   dma_addr_t srcData,	/* Place to get data to write to device */
+				   dma_addr_t dstData,	/* Pointer to device data address */
+				   size_t numBytes	/* Number of bytes to transfer to the device */
+    );
+
+/****************************************************************************/
+/**
+*   Adds a region of memory to the descriptor ring. Note that it may take
+*   multiple descriptors for each region of memory. It is the callers
+*   responsibility to allocate a sufficiently large descriptor ring.
+*
+*   @return
+*       0       Descriptors were added successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_add_descriptors(DMA_DescriptorRing_t *ring,	/* Descriptor ring to add descriptors to */
+			DMA_Device_t device,	/* DMA Device that descriptors are for */
+			dma_addr_t srcData,	/* Place to get data (memory or device) */
+			dma_addr_t dstData,	/* Place to put data (memory or device) */
+			size_t numBytes	/* Number of bytes to transfer to the device */
+    );
+
+/****************************************************************************/
+/**
+*   Sets the descriptor ring associated with a device.
+*
+*   Once set, the descriptor ring will be associated with the device, even
+*   across channel request/free calls. Passing in a NULL descriptor ring
+*   will release any descriptor ring currently associated with the device.
+*
+*   Note: If you call dma_transfer, or one of the other dma_alloc_ functions
+*         the descriptor ring may be released and reallocated.
+*
+*   Note: This function will release the descriptor memory for any current
+*         descriptor ring associated with this device.
+*/
+/****************************************************************************/
+
+int dma_set_device_descriptor_ring(DMA_Device_t device,	/* Device to update the descriptor ring for. */
+				   DMA_DescriptorRing_t *ring	/* Descriptor ring to add descriptors to */
+    );
+
+/****************************************************************************/
+/**
+*   Retrieves the descriptor ring associated with a device.
+*/
+/****************************************************************************/
+
+int dma_get_device_descriptor_ring(DMA_Device_t device,	/* Device to retrieve the descriptor ring for. */
+				   DMA_DescriptorRing_t *ring	/* Place to store retrieved ring */
+    );
+
+/****************************************************************************/
+/**
+*   Allocates buffers for the descriptors. This is normally done automatically
+*   but needs to be done explicitly when initiating a dma from interrupt
+*   context.
+*
+*   @return
+*       0       Descriptors were allocated successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_alloc_descriptors(DMA_Handle_t handle,	/* DMA Handle */
+			  dmacHw_TRANSFER_TYPE_e transferType,	/* Type of transfer being performed */
+			  dma_addr_t srcData,	/* Place to get data to write to device */
+			  dma_addr_t dstData,	/* Pointer to device data address */
+			  size_t numBytes	/* Number of bytes to transfer to the device */
+    );
+
+/****************************************************************************/
+/**
+*   Allocates and sets up descriptors for a double buffered circular buffer.
+*
+*   This is primarily intended to be used for things like the ingress samples
+*   from a microphone.
+*
+*   @return
+*       > 0     Number of descriptors actually allocated.
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_alloc_double_dst_descriptors(DMA_Handle_t handle,	/* DMA Handle */
+				     dma_addr_t srcData,	/* Physical address of source data */
+				     dma_addr_t dstData1,	/* Physical address of first destination buffer */
+				     dma_addr_t dstData2,	/* Physical address of second destination buffer */
+				     size_t numBytes	/* Number of bytes in each destination buffer */
+    );
+
+/****************************************************************************/
+/**
+*   Initializes a DMA_MemMap_t data structure
+*/
+/****************************************************************************/
+
+int dma_init_mem_map(DMA_MemMap_t *memMap	/* Stores state information about the map */
+    );
+
+/****************************************************************************/
+/**
+*   Releases any memory currently being held by a memory mapping structure.
+*/
+/****************************************************************************/
+
+int dma_term_mem_map(DMA_MemMap_t *memMap	/* Stores state information about the map */
+    );
+
+/****************************************************************************/
+/**
+*   Looks at a memory address and categorizes it.
+*
+*   @return One of the values from the DMA_MemType_t enumeration.
+*/
+/****************************************************************************/
+
+DMA_MemType_t dma_mem_type(void *addr);
+
+/****************************************************************************/
+/**
+*   Sets the process (aka userTask) associated with a mem map. This is
+*   required if user-mode segments will be added to the mapping.
+*/
+/****************************************************************************/
+
+static inline void dma_mem_map_set_user_task(DMA_MemMap_t *memMap,
+					     struct task_struct *task)
+{
+	memMap->userTask = task;
+}
+
+/****************************************************************************/
+/**
+*   Looks at a memory address and determines if we support DMA'ing to/from
+*   that type of memory.
+*
+*   @return boolean -
+*               return value != 0 means dma supported
+*               return value == 0 means dma not supported
+*/
+/****************************************************************************/
+
+int dma_mem_supports_dma(void *addr);
+
+/****************************************************************************/
+/**
+*   Initializes a memory map for use. Since this function acquires a
+*   sempaphore within the memory map, it is VERY important that dma_unmap
+*   be called when you're finished using the map.
+*/
+/****************************************************************************/
+
+int dma_map_start(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+		  enum dma_data_direction dir	/* Direction that the mapping will be going */
+    );
+
+/****************************************************************************/
+/**
+*   Adds a segment of memory to a memory map.
+*
+*   @return     0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_add_region(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+		       void *mem,	/* Virtual address that we want to get a map of */
+		       size_t numBytes	/* Number of bytes being mapped */
+    );
+
+/****************************************************************************/
+/**
+*   Creates a descriptor ring from a memory mapping.
+*
+*   @return 0 on sucess, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_create_descriptor_ring(DMA_Device_t dev,	/* DMA device (where the ring is stored) */
+				   DMA_MemMap_t *memMap,	/* Memory map that will be used */
+				   dma_addr_t devPhysAddr	/* Physical address of device */
+    );
+
+/****************************************************************************/
+/**
+*   Maps in a memory region such that it can be used for performing a DMA.
+*
+*   @return
+*/
+/****************************************************************************/
+
+int dma_map_mem(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+		void *addr,	/* Virtual address that we want to get a map of */
+		size_t count,	/* Number of bytes being mapped */
+		enum dma_data_direction dir	/* Direction that the mapping will be going */
+    );
+
+/****************************************************************************/
+/**
+*   Maps in a memory region such that it can be used for performing a DMA.
+*
+*   @return
+*/
+/****************************************************************************/
+
+int dma_unmap(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+	      int dirtied	/* non-zero if any of the pages were modified */
+    );
+
+/****************************************************************************/
+/**
+*   Initiates a transfer when the descriptors have already been setup.
+*
+*   This is a special case, and normally, the dma_transfer_xxx functions should
+*   be used.
+*
+*   @return
+*       0       Transfer was started successfully
+*       -ENODEV Invalid handle
+*/
+/****************************************************************************/
+
+int dma_start_transfer(DMA_Handle_t handle);
+
+/****************************************************************************/
+/**
+*   Stops a previously started DMA transfer.
+*
+*   @return
+*       0       Transfer was stopped successfully
+*       -ENODEV Invalid handle
+*/
+/****************************************************************************/
+
+int dma_stop_transfer(DMA_Handle_t handle);
+
+/****************************************************************************/
+/**
+*   Waits for a DMA to complete by polling. This function is only intended
+*   to be used for testing. Interrupts should be used for most DMA operations.
+*/
+/****************************************************************************/
+
+int dma_wait_transfer_done(DMA_Handle_t handle);
+
+/****************************************************************************/
+/**
+*   Initiates a DMA transfer
+*
+*   @return
+*       0       Transfer was started successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*/
+/****************************************************************************/
+
+int dma_transfer(DMA_Handle_t handle,	/* DMA Handle */
+		 dmacHw_TRANSFER_TYPE_e transferType,	/* Type of transfer being performed */
+		 dma_addr_t srcData,	/* Place to get data to write to device */
+		 dma_addr_t dstData,	/* Pointer to device data address */
+		 size_t numBytes	/* Number of bytes to transfer to the device */
+    );
+
+/****************************************************************************/
+/**
+*   Initiates a transfer from memory to a device.
+*
+*   @return
+*       0       Transfer was started successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _DEV_TO_MEM and not _MEM_TO_DEV)
+*/
+/****************************************************************************/
+
+static inline int dma_transfer_to_device(DMA_Handle_t handle,	/* DMA Handle */
+					 dma_addr_t srcData,	/* Place to get data to write to device (physical address) */
+					 dma_addr_t dstData,	/* Pointer to device data address (physical address) */
+					 size_t numBytes	/* Number of bytes to transfer to the device */
+    ) {
+	return dma_transfer(handle,
+			    dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+			    srcData, dstData, numBytes);
+}
+
+/****************************************************************************/
+/**
+*   Initiates a transfer from a device to memory.
+*
+*   @return
+*       0       Transfer was started successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*/
+/****************************************************************************/
+
+static inline int dma_transfer_from_device(DMA_Handle_t handle,	/* DMA Handle */
+					   dma_addr_t srcData,	/* Pointer to the device data address (physical address) */
+					   dma_addr_t dstData,	/* Place to store data retrieved from the device (physical address) */
+					   size_t numBytes	/* Number of bytes to retrieve from the device */
+    ) {
+	return dma_transfer(handle,
+			    dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+			    srcData, dstData, numBytes);
+}
+
+/****************************************************************************/
+/**
+*   Initiates a memory to memory transfer.
+*
+*   @return
+*       0       Transfer was started successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device wasn't DMA_DEVICE_MEM_TO_MEM)
+*/
+/****************************************************************************/
+
+static inline int dma_transfer_mem_to_mem(DMA_Handle_t handle,	/* DMA Handle */
+					  dma_addr_t srcData,	/* Place to transfer data from (physical address) */
+					  dma_addr_t dstData,	/* Place to transfer data to (physical address) */
+					  size_t numBytes	/* Number of bytes to transfer */
+    ) {
+	return dma_transfer(handle,
+			    dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+			    srcData, dstData, numBytes);
+}
+
+/****************************************************************************/
+/**
+*   Set the callback function which will be called when a transfer completes.
+*   If a NULL callback function is set, then no callback will occur.
+*
+*   @note   @a devHandler will be called from IRQ context.
+*
+*   @return
+*       0       - Success
+*       -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_set_device_handler(DMA_Device_t dev,	/* Device to set the callback for. */
+			   DMA_DeviceHandler_t devHandler,	/* Function to call when the DMA completes */
+			   void *userData	/* Pointer which will be passed to devHandler. */
+    );
+
+#endif
+
+#endif /* ASM_ARM_ARCH_BCMRING_DMA_H */
-- 
cgit v1.2.3


From 859277f7dbf8b48016d55ea2171d04eed074d858 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:01:13 +0100
Subject: ARM: 5648/1: bcmring: add bmcring dma.c

implement dma support for bcmring

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/dma.c | 2321 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 2321 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/dma.c

(limited to 'arch/arm')

diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c
new file mode 100644
index 00000000000..7b20fccb9d4
--- /dev/null
+++ b/arch/arm/mach-bcmring/dma.c
@@ -0,0 +1,2321 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*   @file   dma.c
+*
+*   @brief  Implements the DMA interface.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/irqreturn.h>
+#include <linux/proc_fs.h>
+
+#include <mach/timer.h>
+
+#include <linux/mm.h>
+#include <linux/pfn.h>
+#include <asm/atomic.h>
+#include <mach/dma.h>
+
+/* I don't quite understand why dc4 fails when this is set to 1 and DMA is enabled */
+/* especially since dc4 doesn't use kmalloc'd memory. */
+
+#define ALLOW_MAP_OF_KMALLOC_MEMORY 0
+
+/* ---- Public Variables ------------------------------------------------- */
+
+/* ---- Private Constants and Types -------------------------------------- */
+
+#define MAKE_HANDLE(controllerIdx, channelIdx)    (((controllerIdx) << 4) | (channelIdx))
+
+#define CONTROLLER_FROM_HANDLE(handle)    (((handle) >> 4) & 0x0f)
+#define CHANNEL_FROM_HANDLE(handle)       ((handle) & 0x0f)
+
+#define DMA_MAP_DEBUG   0
+
+#if DMA_MAP_DEBUG
+#   define  DMA_MAP_PRINT(fmt, args...)   printk("%s: " fmt, __func__,  ## args)
+#else
+#   define  DMA_MAP_PRINT(fmt, args...)
+#endif
+
+/* ---- Private Variables ------------------------------------------------ */
+
+static DMA_Global_t gDMA;
+static struct proc_dir_entry *gDmaDir;
+
+static atomic_t gDmaStatMemTypeKmalloc = ATOMIC_INIT(0);
+static atomic_t gDmaStatMemTypeVmalloc = ATOMIC_INIT(0);
+static atomic_t gDmaStatMemTypeUser = ATOMIC_INIT(0);
+static atomic_t gDmaStatMemTypeCoherent = ATOMIC_INIT(0);
+
+#include "dma_device.c"
+
+/* ---- Private Function Prototypes -------------------------------------- */
+
+/* ---- Functions  ------------------------------------------------------- */
+
+/****************************************************************************/
+/**
+*   Displays information for /proc/dma/mem-type
+*/
+/****************************************************************************/
+
+static int dma_proc_read_mem_type(char *buf, char **start, off_t offset,
+				  int count, int *eof, void *data)
+{
+	int len = 0;
+
+	len += sprintf(buf + len, "dma_map_mem statistics\n");
+	len +=
+	    sprintf(buf + len, "coherent: %d\n",
+		    atomic_read(&gDmaStatMemTypeCoherent));
+	len +=
+	    sprintf(buf + len, "kmalloc:  %d\n",
+		    atomic_read(&gDmaStatMemTypeKmalloc));
+	len +=
+	    sprintf(buf + len, "vmalloc:  %d\n",
+		    atomic_read(&gDmaStatMemTypeVmalloc));
+	len +=
+	    sprintf(buf + len, "user:     %d\n",
+		    atomic_read(&gDmaStatMemTypeUser));
+
+	return len;
+}
+
+/****************************************************************************/
+/**
+*   Displays information for /proc/dma/channels
+*/
+/****************************************************************************/
+
+static int dma_proc_read_channels(char *buf, char **start, off_t offset,
+				  int count, int *eof, void *data)
+{
+	int controllerIdx;
+	int channelIdx;
+	int limit = count - 200;
+	int len = 0;
+	DMA_Channel_t *channel;
+
+	if (down_interruptible(&gDMA.lock) < 0) {
+		return -ERESTARTSYS;
+	}
+
+	for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS;
+	     controllerIdx++) {
+		for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS;
+		     channelIdx++) {
+			if (len >= limit) {
+				break;
+			}
+
+			channel =
+			    &gDMA.controller[controllerIdx].channel[channelIdx];
+
+			len +=
+			    sprintf(buf + len, "%d:%d ", controllerIdx,
+				    channelIdx);
+
+			if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) !=
+			    0) {
+				len +=
+				    sprintf(buf + len, "Dedicated for %s ",
+					    DMA_gDeviceAttribute[channel->
+								 devType].name);
+			} else {
+				len += sprintf(buf + len, "Shared ");
+			}
+
+			if ((channel->flags & DMA_CHANNEL_FLAG_NO_ISR) != 0) {
+				len += sprintf(buf + len, "No ISR ");
+			}
+
+			if ((channel->flags & DMA_CHANNEL_FLAG_LARGE_FIFO) != 0) {
+				len += sprintf(buf + len, "Fifo: 128 ");
+			} else {
+				len += sprintf(buf + len, "Fifo: 64  ");
+			}
+
+			if ((channel->flags & DMA_CHANNEL_FLAG_IN_USE) != 0) {
+				len +=
+				    sprintf(buf + len, "InUse by %s",
+					    DMA_gDeviceAttribute[channel->
+								 devType].name);
+#if (DMA_DEBUG_TRACK_RESERVATION)
+				len +=
+				    sprintf(buf + len, " (%s:%d)",
+					    channel->fileName,
+					    channel->lineNum);
+#endif
+			} else {
+				len += sprintf(buf + len, "Avail ");
+			}
+
+			if (channel->lastDevType != DMA_DEVICE_NONE) {
+				len +=
+				    sprintf(buf + len, "Last use: %s ",
+					    DMA_gDeviceAttribute[channel->
+								 lastDevType].
+					    name);
+			}
+
+			len += sprintf(buf + len, "\n");
+		}
+	}
+	up(&gDMA.lock);
+	*eof = 1;
+
+	return len;
+}
+
+/****************************************************************************/
+/**
+*   Displays information for /proc/dma/devices
+*/
+/****************************************************************************/
+
+static int dma_proc_read_devices(char *buf, char **start, off_t offset,
+				 int count, int *eof, void *data)
+{
+	int limit = count - 200;
+	int len = 0;
+	int devIdx;
+
+	if (down_interruptible(&gDMA.lock) < 0) {
+		return -ERESTARTSYS;
+	}
+
+	for (devIdx = 0; devIdx < DMA_NUM_DEVICE_ENTRIES; devIdx++) {
+		DMA_DeviceAttribute_t *devAttr = &DMA_gDeviceAttribute[devIdx];
+
+		if (devAttr->name == NULL) {
+			continue;
+		}
+
+		if (len >= limit) {
+			break;
+		}
+
+		len += sprintf(buf + len, "%-12s ", devAttr->name);
+
+		if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) {
+			len +=
+			    sprintf(buf + len, "Dedicated %d:%d ",
+				    devAttr->dedicatedController,
+				    devAttr->dedicatedChannel);
+		} else {
+			len += sprintf(buf + len, "Shared DMA:");
+			if ((devAttr->flags & DMA_DEVICE_FLAG_ON_DMA0) != 0) {
+				len += sprintf(buf + len, "0");
+			}
+			if ((devAttr->flags & DMA_DEVICE_FLAG_ON_DMA1) != 0) {
+				len += sprintf(buf + len, "1");
+			}
+			len += sprintf(buf + len, " ");
+		}
+		if ((devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) != 0) {
+			len += sprintf(buf + len, "NoISR ");
+		}
+		if ((devAttr->flags & DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO) != 0) {
+			len += sprintf(buf + len, "Allow-128 ");
+		}
+
+		len +=
+		    sprintf(buf + len,
+			    "Xfer #: %Lu Ticks: %Lu Bytes: %Lu DescLen: %u\n",
+			    devAttr->numTransfers, devAttr->transferTicks,
+			    devAttr->transferBytes,
+			    devAttr->ring.bytesAllocated);
+
+	}
+
+	up(&gDMA.lock);
+	*eof = 1;
+
+	return len;
+}
+
+/****************************************************************************/
+/**
+*   Determines if a DMA_Device_t is "valid".
+*
+*   @return
+*       TRUE        - dma device is valid
+*       FALSE       - dma device isn't valid
+*/
+/****************************************************************************/
+
+static inline int IsDeviceValid(DMA_Device_t device)
+{
+	return (device >= 0) && (device < DMA_NUM_DEVICE_ENTRIES);
+}
+
+/****************************************************************************/
+/**
+*   Translates a DMA handle into a pointer to a channel.
+*
+*   @return
+*       non-NULL    - pointer to DMA_Channel_t
+*       NULL        - DMA Handle was invalid
+*/
+/****************************************************************************/
+
+static inline DMA_Channel_t *HandleToChannel(DMA_Handle_t handle)
+{
+	int controllerIdx;
+	int channelIdx;
+
+	controllerIdx = CONTROLLER_FROM_HANDLE(handle);
+	channelIdx = CHANNEL_FROM_HANDLE(handle);
+
+	if ((controllerIdx > DMA_NUM_CONTROLLERS)
+	    || (channelIdx > DMA_NUM_CHANNELS)) {
+		return NULL;
+	}
+	return &gDMA.controller[controllerIdx].channel[channelIdx];
+}
+
+/****************************************************************************/
+/**
+*   Interrupt handler which is called to process DMA interrupts.
+*/
+/****************************************************************************/
+
+static irqreturn_t dma_interrupt_handler(int irq, void *dev_id)
+{
+	DMA_Channel_t *channel;
+	DMA_DeviceAttribute_t *devAttr;
+	int irqStatus;
+
+	channel = (DMA_Channel_t *) dev_id;
+
+	/* Figure out why we were called, and knock down the interrupt */
+
+	irqStatus = dmacHw_getInterruptStatus(channel->dmacHwHandle);
+	dmacHw_clearInterrupt(channel->dmacHwHandle);
+
+	if ((channel->devType < 0)
+	    || (channel->devType > DMA_NUM_DEVICE_ENTRIES)) {
+		printk(KERN_ERR "dma_interrupt_handler: Invalid devType: %d\n",
+		       channel->devType);
+		return IRQ_NONE;
+	}
+	devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+	/* Update stats */
+
+	if ((irqStatus & dmacHw_INTERRUPT_STATUS_TRANS) != 0) {
+		devAttr->transferTicks +=
+		    (timer_get_tick_count() - devAttr->transferStartTime);
+	}
+
+	if ((irqStatus & dmacHw_INTERRUPT_STATUS_ERROR) != 0) {
+		printk(KERN_ERR
+		       "dma_interrupt_handler: devType :%d DMA error (%s)\n",
+		       channel->devType, devAttr->name);
+	} else {
+		devAttr->numTransfers++;
+		devAttr->transferBytes += devAttr->numBytes;
+	}
+
+	/* Call any installed handler */
+
+	if (devAttr->devHandler != NULL) {
+		devAttr->devHandler(channel->devType, irqStatus,
+				    devAttr->userData);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/****************************************************************************/
+/**
+*   Allocates memory to hold a descriptor ring. The descriptor ring then
+*   needs to be populated by making one or more calls to
+*   dna_add_descriptors.
+*
+*   The returned descriptor ring will be automatically initialized.
+*
+*   @return
+*       0           Descriptor ring was allocated successfully
+*       -EINVAL     Invalid parameters passed in
+*       -ENOMEM     Unable to allocate memory for the desired number of descriptors.
+*/
+/****************************************************************************/
+
+int dma_alloc_descriptor_ring(DMA_DescriptorRing_t *ring,	/* Descriptor ring to populate */
+			      int numDescriptors	/* Number of descriptors that need to be allocated. */
+    ) {
+	size_t bytesToAlloc = dmacHw_descriptorLen(numDescriptors);
+
+	if ((ring == NULL) || (numDescriptors <= 0)) {
+		return -EINVAL;
+	}
+
+	ring->physAddr = 0;
+	ring->descriptorsAllocated = 0;
+	ring->bytesAllocated = 0;
+
+	ring->virtAddr = dma_alloc_writecombine(NULL,
+						     bytesToAlloc,
+						     &ring->physAddr,
+						     GFP_KERNEL);
+	if (ring->virtAddr == NULL) {
+		return -ENOMEM;
+	}
+
+	ring->bytesAllocated = bytesToAlloc;
+	ring->descriptorsAllocated = numDescriptors;
+
+	return dma_init_descriptor_ring(ring, numDescriptors);
+}
+
+EXPORT_SYMBOL(dma_alloc_descriptor_ring);
+
+/****************************************************************************/
+/**
+*   Releases the memory which was previously allocated for a descriptor ring.
+*/
+/****************************************************************************/
+
+void dma_free_descriptor_ring(DMA_DescriptorRing_t *ring	/* Descriptor to release */
+    ) {
+	if (ring->virtAddr != NULL) {
+		dma_free_writecombine(NULL,
+				      ring->bytesAllocated,
+				      ring->virtAddr, ring->physAddr);
+	}
+
+	ring->bytesAllocated = 0;
+	ring->descriptorsAllocated = 0;
+	ring->virtAddr = NULL;
+	ring->physAddr = 0;
+}
+
+EXPORT_SYMBOL(dma_free_descriptor_ring);
+
+/****************************************************************************/
+/**
+*   Initializes a descriptor ring, so that descriptors can be added to it.
+*   Once a descriptor ring has been allocated, it may be reinitialized for
+*   use with additional/different regions of memory.
+*
+*   Note that if 7 descriptors are allocated, it's perfectly acceptable to
+*   initialize the ring with a smaller number of descriptors. The amount
+*   of memory allocated for the descriptor ring will not be reduced, and
+*   the descriptor ring may be reinitialized later
+*
+*   @return
+*       0           Descriptor ring was initialized successfully
+*       -ENOMEM     The descriptor which was passed in has insufficient space
+*                   to hold the desired number of descriptors.
+*/
+/****************************************************************************/
+
+int dma_init_descriptor_ring(DMA_DescriptorRing_t *ring,	/* Descriptor ring to initialize */
+			     int numDescriptors	/* Number of descriptors to initialize. */
+    ) {
+	if (ring->virtAddr == NULL) {
+		return -EINVAL;
+	}
+	if (dmacHw_initDescriptor(ring->virtAddr,
+				  ring->physAddr,
+				  ring->bytesAllocated, numDescriptors) < 0) {
+		printk(KERN_ERR
+		       "dma_init_descriptor_ring: dmacHw_initDescriptor failed\n");
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_init_descriptor_ring);
+
+/****************************************************************************/
+/**
+*   Determines the number of descriptors which would be required for a
+*   transfer of the indicated memory region.
+*
+*   This function also needs to know which DMA device this transfer will
+*   be destined for, so that the appropriate DMA configuration can be retrieved.
+*   DMA parameters such as transfer width, and whether this is a memory-to-memory
+*   or memory-to-peripheral, etc can all affect the actual number of descriptors
+*   required.
+*
+*   @return
+*       > 0     Returns the number of descriptors required for the indicated transfer
+*       -ENODEV - Device handed in is invalid.
+*       -EINVAL Invalid parameters
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_calculate_descriptor_count(DMA_Device_t device,	/* DMA Device that this will be associated with */
+				   dma_addr_t srcData,	/* Place to get data to write to device */
+				   dma_addr_t dstData,	/* Pointer to device data address */
+				   size_t numBytes	/* Number of bytes to transfer to the device */
+    ) {
+	int numDescriptors;
+	DMA_DeviceAttribute_t *devAttr;
+
+	if (!IsDeviceValid(device)) {
+		return -ENODEV;
+	}
+	devAttr = &DMA_gDeviceAttribute[device];
+
+	numDescriptors = dmacHw_calculateDescriptorCount(&devAttr->config,
+							      (void *)srcData,
+							      (void *)dstData,
+							      numBytes);
+	if (numDescriptors < 0) {
+		printk(KERN_ERR
+		       "dma_calculate_descriptor_count: dmacHw_calculateDescriptorCount failed\n");
+		return -EINVAL;
+	}
+
+	return numDescriptors;
+}
+
+EXPORT_SYMBOL(dma_calculate_descriptor_count);
+
+/****************************************************************************/
+/**
+*   Adds a region of memory to the descriptor ring. Note that it may take
+*   multiple descriptors for each region of memory. It is the callers
+*   responsibility to allocate a sufficiently large descriptor ring.
+*
+*   @return
+*       0       Descriptors were added successfully
+*       -ENODEV Device handed in is invalid.
+*       -EINVAL Invalid parameters
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_add_descriptors(DMA_DescriptorRing_t *ring,	/* Descriptor ring to add descriptors to */
+			DMA_Device_t device,	/* DMA Device that descriptors are for */
+			dma_addr_t srcData,	/* Place to get data (memory or device) */
+			dma_addr_t dstData,	/* Place to put data (memory or device) */
+			size_t numBytes	/* Number of bytes to transfer to the device */
+    ) {
+	int rc;
+	DMA_DeviceAttribute_t *devAttr;
+
+	if (!IsDeviceValid(device)) {
+		return -ENODEV;
+	}
+	devAttr = &DMA_gDeviceAttribute[device];
+
+	rc = dmacHw_setDataDescriptor(&devAttr->config,
+				      ring->virtAddr,
+				      (void *)srcData,
+				      (void *)dstData, numBytes);
+	if (rc < 0) {
+		printk(KERN_ERR
+		       "dma_add_descriptors: dmacHw_setDataDescriptor failed with code: %d\n",
+		       rc);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_add_descriptors);
+
+/****************************************************************************/
+/**
+*   Sets the descriptor ring associated with a device.
+*
+*   Once set, the descriptor ring will be associated with the device, even
+*   across channel request/free calls. Passing in a NULL descriptor ring
+*   will release any descriptor ring currently associated with the device.
+*
+*   Note: If you call dma_transfer, or one of the other dma_alloc_ functions
+*         the descriptor ring may be released and reallocated.
+*
+*   Note: This function will release the descriptor memory for any current
+*         descriptor ring associated with this device.
+*
+*   @return
+*       0       Descriptors were added successfully
+*       -ENODEV Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_set_device_descriptor_ring(DMA_Device_t device,	/* Device to update the descriptor ring for. */
+				   DMA_DescriptorRing_t *ring	/* Descriptor ring to add descriptors to */
+    ) {
+	DMA_DeviceAttribute_t *devAttr;
+
+	if (!IsDeviceValid(device)) {
+		return -ENODEV;
+	}
+	devAttr = &DMA_gDeviceAttribute[device];
+
+	/* Free the previously allocated descriptor ring */
+
+	dma_free_descriptor_ring(&devAttr->ring);
+
+	if (ring != NULL) {
+		/* Copy in the new one */
+
+		devAttr->ring = *ring;
+	}
+
+	/* Set things up so that if dma_transfer is called then this descriptor */
+	/* ring will get freed. */
+
+	devAttr->prevSrcData = 0;
+	devAttr->prevDstData = 0;
+	devAttr->prevNumBytes = 0;
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_set_device_descriptor_ring);
+
+/****************************************************************************/
+/**
+*   Retrieves the descriptor ring associated with a device.
+*
+*   @return
+*       0       Descriptors were added successfully
+*       -ENODEV Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_get_device_descriptor_ring(DMA_Device_t device,	/* Device to retrieve the descriptor ring for. */
+				   DMA_DescriptorRing_t *ring	/* Place to store retrieved ring */
+    ) {
+	DMA_DeviceAttribute_t *devAttr;
+
+	memset(ring, 0, sizeof(*ring));
+
+	if (!IsDeviceValid(device)) {
+		return -ENODEV;
+	}
+	devAttr = &DMA_gDeviceAttribute[device];
+
+	*ring = devAttr->ring;
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_get_device_descriptor_ring);
+
+/****************************************************************************/
+/**
+*   Configures a DMA channel.
+*
+*   @return
+*       >= 0    - Initialization was successfull.
+*
+*       -EBUSY  - Device is currently being used.
+*       -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+static int ConfigChannel(DMA_Handle_t handle)
+{
+	DMA_Channel_t *channel;
+	DMA_DeviceAttribute_t *devAttr;
+	int controllerIdx;
+
+	channel = HandleToChannel(handle);
+	if (channel == NULL) {
+		return -ENODEV;
+	}
+	devAttr = &DMA_gDeviceAttribute[channel->devType];
+	controllerIdx = CONTROLLER_FROM_HANDLE(handle);
+
+	if ((devAttr->flags & DMA_DEVICE_FLAG_PORT_PER_DMAC) != 0) {
+		if (devAttr->config.transferType ==
+		    dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL) {
+			devAttr->config.dstPeripheralPort =
+			    devAttr->dmacPort[controllerIdx];
+		} else if (devAttr->config.transferType ==
+			   dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM) {
+			devAttr->config.srcPeripheralPort =
+			    devAttr->dmacPort[controllerIdx];
+		}
+	}
+
+	if (dmacHw_configChannel(channel->dmacHwHandle, &devAttr->config) != 0) {
+		printk(KERN_ERR "ConfigChannel: dmacHw_configChannel failed\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*   Intializes all of the data structures associated with the DMA.
+*   @return
+*       >= 0    - Initialization was successfull.
+*
+*       -EBUSY  - Device is currently being used.
+*       -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_init(void)
+{
+	int rc = 0;
+	int controllerIdx;
+	int channelIdx;
+	DMA_Device_t devIdx;
+	DMA_Channel_t *channel;
+	DMA_Handle_t dedicatedHandle;
+
+	memset(&gDMA, 0, sizeof(gDMA));
+
+	init_MUTEX_LOCKED(&gDMA.lock);
+	init_waitqueue_head(&gDMA.freeChannelQ);
+
+	/* Initialize the Hardware */
+
+	dmacHw_initDma();
+
+	/* Start off by marking all of the DMA channels as shared. */
+
+	for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS;
+	     controllerIdx++) {
+		for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS;
+		     channelIdx++) {
+			channel =
+			    &gDMA.controller[controllerIdx].channel[channelIdx];
+
+			channel->flags = 0;
+			channel->devType = DMA_DEVICE_NONE;
+			channel->lastDevType = DMA_DEVICE_NONE;
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+			channel->fileName = "";
+			channel->lineNum = 0;
+#endif
+
+			channel->dmacHwHandle =
+			    dmacHw_getChannelHandle(dmacHw_MAKE_CHANNEL_ID
+						    (controllerIdx,
+						     channelIdx));
+			dmacHw_initChannel(channel->dmacHwHandle);
+		}
+	}
+
+	/* Record any special attributes that channels may have */
+
+	gDMA.controller[0].channel[0].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
+	gDMA.controller[0].channel[1].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
+	gDMA.controller[1].channel[0].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
+	gDMA.controller[1].channel[1].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
+
+	/* Now walk through and record the dedicated channels. */
+
+	for (devIdx = 0; devIdx < DMA_NUM_DEVICE_ENTRIES; devIdx++) {
+		DMA_DeviceAttribute_t *devAttr = &DMA_gDeviceAttribute[devIdx];
+
+		if (((devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) != 0)
+		    && ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) == 0)) {
+			printk(KERN_ERR
+			       "DMA Device: %s Can only request NO_ISR for dedicated devices\n",
+			       devAttr->name);
+			rc = -EINVAL;
+			goto out;
+		}
+
+		if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) {
+			/* This is a dedicated device. Mark the channel as being reserved. */
+
+			if (devAttr->dedicatedController >= DMA_NUM_CONTROLLERS) {
+				printk(KERN_ERR
+				       "DMA Device: %s DMA Controller %d is out of range\n",
+				       devAttr->name,
+				       devAttr->dedicatedController);
+				rc = -EINVAL;
+				goto out;
+			}
+
+			if (devAttr->dedicatedChannel >= DMA_NUM_CHANNELS) {
+				printk(KERN_ERR
+				       "DMA Device: %s DMA Channel %d is out of range\n",
+				       devAttr->name,
+				       devAttr->dedicatedChannel);
+				rc = -EINVAL;
+				goto out;
+			}
+
+			dedicatedHandle =
+			    MAKE_HANDLE(devAttr->dedicatedController,
+					devAttr->dedicatedChannel);
+			channel = HandleToChannel(dedicatedHandle);
+
+			if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) !=
+			    0) {
+				printk
+				    ("DMA Device: %s attempting to use same DMA Controller:Channel (%d:%d) as %s\n",
+				     devAttr->name,
+				     devAttr->dedicatedController,
+				     devAttr->dedicatedChannel,
+				     DMA_gDeviceAttribute[channel->devType].
+				     name);
+				rc = -EBUSY;
+				goto out;
+			}
+
+			channel->flags |= DMA_CHANNEL_FLAG_IS_DEDICATED;
+			channel->devType = devIdx;
+
+			if (devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) {
+				channel->flags |= DMA_CHANNEL_FLAG_NO_ISR;
+			}
+
+			/* For dedicated channels, we can go ahead and configure the DMA channel now */
+			/* as well. */
+
+			ConfigChannel(dedicatedHandle);
+		}
+	}
+
+	/* Go through and register the interrupt handlers */
+
+	for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS;
+	     controllerIdx++) {
+		for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS;
+		     channelIdx++) {
+			channel =
+			    &gDMA.controller[controllerIdx].channel[channelIdx];
+
+			if ((channel->flags & DMA_CHANNEL_FLAG_NO_ISR) == 0) {
+				snprintf(channel->name, sizeof(channel->name),
+					 "dma %d:%d %s", controllerIdx,
+					 channelIdx,
+					 channel->devType ==
+					 DMA_DEVICE_NONE ? "" :
+					 DMA_gDeviceAttribute[channel->devType].
+					 name);
+
+				rc =
+				     request_irq(IRQ_DMA0C0 +
+						 (controllerIdx *
+						  DMA_NUM_CHANNELS) +
+						 channelIdx,
+						 dma_interrupt_handler,
+						 IRQF_DISABLED, channel->name,
+						 channel);
+				if (rc != 0) {
+					printk(KERN_ERR
+					       "request_irq for IRQ_DMA%dC%d failed\n",
+					       controllerIdx, channelIdx);
+				}
+			}
+		}
+	}
+
+	/* Create /proc/dma/channels and /proc/dma/devices */
+
+	gDmaDir = create_proc_entry("dma", S_IFDIR | S_IRUGO | S_IXUGO, NULL);
+
+	if (gDmaDir == NULL) {
+		printk(KERN_ERR "Unable to create /proc/dma\n");
+	} else {
+		create_proc_read_entry("channels", 0, gDmaDir,
+				       dma_proc_read_channels, NULL);
+		create_proc_read_entry("devices", 0, gDmaDir,
+				       dma_proc_read_devices, NULL);
+		create_proc_read_entry("mem-type", 0, gDmaDir,
+				       dma_proc_read_mem_type, NULL);
+	}
+
+out:
+
+	up(&gDMA.lock);
+
+	return rc;
+}
+
+/****************************************************************************/
+/**
+*   Reserves a channel for use with @a dev. If the device is setup to use
+*   a shared channel, then this function will block until a free channel
+*   becomes available.
+*
+*   @return
+*       >= 0    - A valid DMA Handle.
+*       -EBUSY  - Device is currently being used.
+*       -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+DMA_Handle_t dma_request_channel_dbg
+    (DMA_Device_t dev, const char *fileName, int lineNum)
+#else
+DMA_Handle_t dma_request_channel(DMA_Device_t dev)
+#endif
+{
+	DMA_Handle_t handle;
+	DMA_DeviceAttribute_t *devAttr;
+	DMA_Channel_t *channel;
+	int controllerIdx;
+	int controllerIdx2;
+	int channelIdx;
+
+	if (down_interruptible(&gDMA.lock) < 0) {
+		return -ERESTARTSYS;
+	}
+
+	if ((dev < 0) || (dev >= DMA_NUM_DEVICE_ENTRIES)) {
+		handle = -ENODEV;
+		goto out;
+	}
+	devAttr = &DMA_gDeviceAttribute[dev];
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+	{
+		char *s;
+
+		s = strrchr(fileName, '/');
+		if (s != NULL) {
+			fileName = s + 1;
+		}
+	}
+#endif
+	if ((devAttr->flags & DMA_DEVICE_FLAG_IN_USE) != 0) {
+		/* This device has already been requested and not been freed */
+
+		printk(KERN_ERR "%s: device %s is already requested\n",
+		       __func__, devAttr->name);
+		handle = -EBUSY;
+		goto out;
+	}
+
+	if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) {
+		/* This device has a dedicated channel. */
+
+		channel =
+		    &gDMA.controller[devAttr->dedicatedController].
+		    channel[devAttr->dedicatedChannel];
+		if ((channel->flags & DMA_CHANNEL_FLAG_IN_USE) != 0) {
+			handle = -EBUSY;
+			goto out;
+		}
+
+		channel->flags |= DMA_CHANNEL_FLAG_IN_USE;
+		devAttr->flags |= DMA_DEVICE_FLAG_IN_USE;
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+		channel->fileName = fileName;
+		channel->lineNum = lineNum;
+#endif
+		handle =
+		    MAKE_HANDLE(devAttr->dedicatedController,
+				devAttr->dedicatedChannel);
+		goto out;
+	}
+
+	/* This device needs to use one of the shared channels. */
+
+	handle = DMA_INVALID_HANDLE;
+	while (handle == DMA_INVALID_HANDLE) {
+		/* Scan through the shared channels and see if one is available */
+
+		for (controllerIdx2 = 0; controllerIdx2 < DMA_NUM_CONTROLLERS;
+		     controllerIdx2++) {
+			/* Check to see if we should try on controller 1 first. */
+
+			controllerIdx = controllerIdx2;
+			if ((devAttr->
+			     flags & DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST) != 0) {
+				controllerIdx = 1 - controllerIdx;
+			}
+
+			/* See if the device is available on the controller being tested */
+
+			if ((devAttr->
+			     flags & (DMA_DEVICE_FLAG_ON_DMA0 << controllerIdx))
+			    != 0) {
+				for (channelIdx = 0;
+				     channelIdx < DMA_NUM_CHANNELS;
+				     channelIdx++) {
+					channel =
+					    &gDMA.controller[controllerIdx].
+					    channel[channelIdx];
+
+					if (((channel->
+					      flags &
+					      DMA_CHANNEL_FLAG_IS_DEDICATED) ==
+					     0)
+					    &&
+					    ((channel->
+					      flags & DMA_CHANNEL_FLAG_IN_USE)
+					     == 0)) {
+						if (((channel->
+						      flags &
+						      DMA_CHANNEL_FLAG_LARGE_FIFO)
+						     != 0)
+						    &&
+						    ((devAttr->
+						      flags &
+						      DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO)
+						     == 0)) {
+							/* This channel is a large fifo - don't tie it up */
+							/* with devices that we don't want using it. */
+
+							continue;
+						}
+
+						channel->flags |=
+						    DMA_CHANNEL_FLAG_IN_USE;
+						channel->devType = dev;
+						devAttr->flags |=
+						    DMA_DEVICE_FLAG_IN_USE;
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+						channel->fileName = fileName;
+						channel->lineNum = lineNum;
+#endif
+						handle =
+						    MAKE_HANDLE(controllerIdx,
+								channelIdx);
+
+						/* Now that we've reserved the channel - we can go ahead and configure it */
+
+						if (ConfigChannel(handle) != 0) {
+							handle = -EIO;
+							printk(KERN_ERR
+							       "dma_request_channel: ConfigChannel failed\n");
+						}
+						goto out;
+					}
+				}
+			}
+		}
+
+		/* No channels are currently available. Let's wait for one to free up. */
+
+		{
+			DEFINE_WAIT(wait);
+
+			prepare_to_wait(&gDMA.freeChannelQ, &wait,
+					TASK_INTERRUPTIBLE);
+			up(&gDMA.lock);
+			schedule();
+			finish_wait(&gDMA.freeChannelQ, &wait);
+
+			if (signal_pending(current)) {
+				/* We don't currently hold gDMA.lock, so we return directly */
+
+				return -ERESTARTSYS;
+			}
+		}
+
+		if (down_interruptible(&gDMA.lock)) {
+			return -ERESTARTSYS;
+		}
+	}
+
+out:
+	up(&gDMA.lock);
+
+	return handle;
+}
+
+/* Create both _dbg and non _dbg functions for modules. */
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+#undef dma_request_channel
+DMA_Handle_t dma_request_channel(DMA_Device_t dev)
+{
+	return dma_request_channel_dbg(dev, __FILE__, __LINE__);
+}
+
+EXPORT_SYMBOL(dma_request_channel_dbg);
+#endif
+EXPORT_SYMBOL(dma_request_channel);
+
+/****************************************************************************/
+/**
+*   Frees a previously allocated DMA Handle.
+*/
+/****************************************************************************/
+
+int dma_free_channel(DMA_Handle_t handle	/* DMA handle. */
+    ) {
+	int rc = 0;
+	DMA_Channel_t *channel;
+	DMA_DeviceAttribute_t *devAttr;
+
+	if (down_interruptible(&gDMA.lock) < 0) {
+		return -ERESTARTSYS;
+	}
+
+	channel = HandleToChannel(handle);
+	if (channel == NULL) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+	if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) == 0) {
+		channel->lastDevType = channel->devType;
+		channel->devType = DMA_DEVICE_NONE;
+	}
+	channel->flags &= ~DMA_CHANNEL_FLAG_IN_USE;
+	devAttr->flags &= ~DMA_DEVICE_FLAG_IN_USE;
+
+out:
+	up(&gDMA.lock);
+
+	wake_up_interruptible(&gDMA.freeChannelQ);
+
+	return rc;
+}
+
+EXPORT_SYMBOL(dma_free_channel);
+
+/****************************************************************************/
+/**
+*   Determines if a given device has been configured as using a shared
+*   channel.
+*
+*   @return
+*       0           Device uses a dedicated channel
+*       > zero      Device uses a shared channel
+*       < zero      Error code
+*/
+/****************************************************************************/
+
+int dma_device_is_channel_shared(DMA_Device_t device	/* Device to check. */
+    ) {
+	DMA_DeviceAttribute_t *devAttr;
+
+	if (!IsDeviceValid(device)) {
+		return -ENODEV;
+	}
+	devAttr = &DMA_gDeviceAttribute[device];
+
+	return ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) == 0);
+}
+
+EXPORT_SYMBOL(dma_device_is_channel_shared);
+
+/****************************************************************************/
+/**
+*   Allocates buffers for the descriptors. This is normally done automatically
+*   but needs to be done explicitly when initiating a dma from interrupt
+*   context.
+*
+*   @return
+*       0       Descriptors were allocated successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_alloc_descriptors(DMA_Handle_t handle,	/* DMA Handle */
+			  dmacHw_TRANSFER_TYPE_e transferType,	/* Type of transfer being performed */
+			  dma_addr_t srcData,	/* Place to get data to write to device */
+			  dma_addr_t dstData,	/* Pointer to device data address */
+			  size_t numBytes	/* Number of bytes to transfer to the device */
+    ) {
+	DMA_Channel_t *channel;
+	DMA_DeviceAttribute_t *devAttr;
+	int numDescriptors;
+	size_t ringBytesRequired;
+	int rc = 0;
+
+	channel = HandleToChannel(handle);
+	if (channel == NULL) {
+		return -ENODEV;
+	}
+
+	devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+	if (devAttr->config.transferType != transferType) {
+		return -EINVAL;
+	}
+
+	/* Figure out how many descriptors we need. */
+
+	/* printk("srcData: 0x%08x dstData: 0x%08x, numBytes: %d\n", */
+	/*        srcData, dstData, numBytes); */
+
+	numDescriptors = dmacHw_calculateDescriptorCount(&devAttr->config,
+							      (void *)srcData,
+							      (void *)dstData,
+							      numBytes);
+	if (numDescriptors < 0) {
+		printk(KERN_ERR "%s: dmacHw_calculateDescriptorCount failed\n",
+		       __func__);
+		return -EINVAL;
+	}
+
+	/* Check to see if we can reuse the existing descriptor ring, or if we need to allocate */
+	/* a new one. */
+
+	ringBytesRequired = dmacHw_descriptorLen(numDescriptors);
+
+	/* printk("ringBytesRequired: %d\n", ringBytesRequired); */
+
+	if (ringBytesRequired > devAttr->ring.bytesAllocated) {
+		/* Make sure that this code path is never taken from interrupt context. */
+		/* It's OK for an interrupt to initiate a DMA transfer, but the descriptor */
+		/* allocation needs to have already been done. */
+
+		might_sleep();
+
+		/* Free the old descriptor ring and allocate a new one. */
+
+		dma_free_descriptor_ring(&devAttr->ring);
+
+		/* And allocate a new one. */
+
+		rc =
+		     dma_alloc_descriptor_ring(&devAttr->ring,
+					       numDescriptors);
+		if (rc < 0) {
+			printk(KERN_ERR
+			       "%s: dma_alloc_descriptor_ring(%d) failed\n",
+			       __func__, numDescriptors);
+			return rc;
+		}
+		/* Setup the descriptor for this transfer */
+
+		if (dmacHw_initDescriptor(devAttr->ring.virtAddr,
+					  devAttr->ring.physAddr,
+					  devAttr->ring.bytesAllocated,
+					  numDescriptors) < 0) {
+			printk(KERN_ERR "%s: dmacHw_initDescriptor failed\n",
+			       __func__);
+			return -EINVAL;
+		}
+	} else {
+		/* We've already got enough ring buffer allocated. All we need to do is reset */
+		/* any control information, just in case the previous DMA was stopped. */
+
+		dmacHw_resetDescriptorControl(devAttr->ring.virtAddr);
+	}
+
+	/* dma_alloc/free both set the prevSrc/DstData to 0. If they happen to be the same */
+	/* as last time, then we don't need to call setDataDescriptor again. */
+
+	if (dmacHw_setDataDescriptor(&devAttr->config,
+				     devAttr->ring.virtAddr,
+				     (void *)srcData,
+				     (void *)dstData, numBytes) < 0) {
+		printk(KERN_ERR "%s: dmacHw_setDataDescriptor failed\n",
+		       __func__);
+		return -EINVAL;
+	}
+
+	/* Remember the critical information for this transfer so that we can eliminate */
+	/* another call to dma_alloc_descriptors if the caller reuses the same buffers */
+
+	devAttr->prevSrcData = srcData;
+	devAttr->prevDstData = dstData;
+	devAttr->prevNumBytes = numBytes;
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_alloc_descriptors);
+
+/****************************************************************************/
+/**
+*   Allocates and sets up descriptors for a double buffered circular buffer.
+*
+*   This is primarily intended to be used for things like the ingress samples
+*   from a microphone.
+*
+*   @return
+*       > 0     Number of descriptors actually allocated.
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_alloc_double_dst_descriptors(DMA_Handle_t handle,	/* DMA Handle */
+				     dma_addr_t srcData,	/* Physical address of source data */
+				     dma_addr_t dstData1,	/* Physical address of first destination buffer */
+				     dma_addr_t dstData2,	/* Physical address of second destination buffer */
+				     size_t numBytes	/* Number of bytes in each destination buffer */
+    ) {
+	DMA_Channel_t *channel;
+	DMA_DeviceAttribute_t *devAttr;
+	int numDst1Descriptors;
+	int numDst2Descriptors;
+	int numDescriptors;
+	size_t ringBytesRequired;
+	int rc = 0;
+
+	channel = HandleToChannel(handle);
+	if (channel == NULL) {
+		return -ENODEV;
+	}
+
+	devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+	/* Figure out how many descriptors we need. */
+
+	/* printk("srcData: 0x%08x dstData: 0x%08x, numBytes: %d\n", */
+	/*        srcData, dstData, numBytes); */
+
+	numDst1Descriptors =
+	     dmacHw_calculateDescriptorCount(&devAttr->config, (void *)srcData,
+					     (void *)dstData1, numBytes);
+	if (numDst1Descriptors < 0) {
+		return -EINVAL;
+	}
+	numDst2Descriptors =
+	     dmacHw_calculateDescriptorCount(&devAttr->config, (void *)srcData,
+					     (void *)dstData2, numBytes);
+	if (numDst2Descriptors < 0) {
+		return -EINVAL;
+	}
+	numDescriptors = numDst1Descriptors + numDst2Descriptors;
+	/* printk("numDescriptors: %d\n", numDescriptors); */
+
+	/* Check to see if we can reuse the existing descriptor ring, or if we need to allocate */
+	/* a new one. */
+
+	ringBytesRequired = dmacHw_descriptorLen(numDescriptors);
+
+	/* printk("ringBytesRequired: %d\n", ringBytesRequired); */
+
+	if (ringBytesRequired > devAttr->ring.bytesAllocated) {
+		/* Make sure that this code path is never taken from interrupt context. */
+		/* It's OK for an interrupt to initiate a DMA transfer, but the descriptor */
+		/* allocation needs to have already been done. */
+
+		might_sleep();
+
+		/* Free the old descriptor ring and allocate a new one. */
+
+		dma_free_descriptor_ring(&devAttr->ring);
+
+		/* And allocate a new one. */
+
+		rc =
+		     dma_alloc_descriptor_ring(&devAttr->ring,
+					       numDescriptors);
+		if (rc < 0) {
+			printk(KERN_ERR
+			       "%s: dma_alloc_descriptor_ring(%d) failed\n",
+			       __func__, ringBytesRequired);
+			return rc;
+		}
+	}
+
+	/* Setup the descriptor for this transfer. Since this function is used with */
+	/* CONTINUOUS DMA operations, we need to reinitialize every time, otherwise */
+	/* setDataDescriptor will keep trying to append onto the end. */
+
+	if (dmacHw_initDescriptor(devAttr->ring.virtAddr,
+				  devAttr->ring.physAddr,
+				  devAttr->ring.bytesAllocated,
+				  numDescriptors) < 0) {
+		printk(KERN_ERR "%s: dmacHw_initDescriptor failed\n", __func__);
+		return -EINVAL;
+	}
+
+	/* dma_alloc/free both set the prevSrc/DstData to 0. If they happen to be the same */
+	/* as last time, then we don't need to call setDataDescriptor again. */
+
+	if (dmacHw_setDataDescriptor(&devAttr->config,
+				     devAttr->ring.virtAddr,
+				     (void *)srcData,
+				     (void *)dstData1, numBytes) < 0) {
+		printk(KERN_ERR "%s: dmacHw_setDataDescriptor 1 failed\n",
+		       __func__);
+		return -EINVAL;
+	}
+	if (dmacHw_setDataDescriptor(&devAttr->config,
+				     devAttr->ring.virtAddr,
+				     (void *)srcData,
+				     (void *)dstData2, numBytes) < 0) {
+		printk(KERN_ERR "%s: dmacHw_setDataDescriptor 2 failed\n",
+		       __func__);
+		return -EINVAL;
+	}
+
+	/* You should use dma_start_transfer rather than dma_transfer_xxx so we don't */
+	/* try to make the 'prev' variables right. */
+
+	devAttr->prevSrcData = 0;
+	devAttr->prevDstData = 0;
+	devAttr->prevNumBytes = 0;
+
+	return numDescriptors;
+}
+
+EXPORT_SYMBOL(dma_alloc_double_dst_descriptors);
+
+/****************************************************************************/
+/**
+*   Initiates a transfer when the descriptors have already been setup.
+*
+*   This is a special case, and normally, the dma_transfer_xxx functions should
+*   be used.
+*
+*   @return
+*       0       Transfer was started successfully
+*       -ENODEV Invalid handle
+*/
+/****************************************************************************/
+
+int dma_start_transfer(DMA_Handle_t handle)
+{
+	DMA_Channel_t *channel;
+	DMA_DeviceAttribute_t *devAttr;
+
+	channel = HandleToChannel(handle);
+	if (channel == NULL) {
+		return -ENODEV;
+	}
+	devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+	dmacHw_initiateTransfer(channel->dmacHwHandle, &devAttr->config,
+				devAttr->ring.virtAddr);
+
+	/* Since we got this far, everything went successfully */
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_start_transfer);
+
+/****************************************************************************/
+/**
+*   Stops a previously started DMA transfer.
+*
+*   @return
+*       0       Transfer was stopped successfully
+*       -ENODEV Invalid handle
+*/
+/****************************************************************************/
+
+int dma_stop_transfer(DMA_Handle_t handle)
+{
+	DMA_Channel_t *channel;
+
+	channel = HandleToChannel(handle);
+	if (channel == NULL) {
+		return -ENODEV;
+	}
+
+	dmacHw_stopTransfer(channel->dmacHwHandle);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_stop_transfer);
+
+/****************************************************************************/
+/**
+*   Waits for a DMA to complete by polling. This function is only intended
+*   to be used for testing. Interrupts should be used for most DMA operations.
+*/
+/****************************************************************************/
+
+int dma_wait_transfer_done(DMA_Handle_t handle)
+{
+	DMA_Channel_t *channel;
+	dmacHw_TRANSFER_STATUS_e status;
+
+	channel = HandleToChannel(handle);
+	if (channel == NULL) {
+		return -ENODEV;
+	}
+
+	while ((status =
+		dmacHw_transferCompleted(channel->dmacHwHandle)) ==
+	       dmacHw_TRANSFER_STATUS_BUSY) {
+		;
+	}
+
+	if (status == dmacHw_TRANSFER_STATUS_ERROR) {
+		printk(KERN_ERR "%s: DMA transfer failed\n", __func__);
+		return -EIO;
+	}
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_wait_transfer_done);
+
+/****************************************************************************/
+/**
+*   Initiates a DMA, allocating the descriptors as required.
+*
+*   @return
+*       0       Transfer was started successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _DEV_TO_MEM and not _MEM_TO_DEV)
+*/
+/****************************************************************************/
+
+int dma_transfer(DMA_Handle_t handle,	/* DMA Handle */
+		 dmacHw_TRANSFER_TYPE_e transferType,	/* Type of transfer being performed */
+		 dma_addr_t srcData,	/* Place to get data to write to device */
+		 dma_addr_t dstData,	/* Pointer to device data address */
+		 size_t numBytes	/* Number of bytes to transfer to the device */
+    ) {
+	DMA_Channel_t *channel;
+	DMA_DeviceAttribute_t *devAttr;
+	int rc = 0;
+
+	channel = HandleToChannel(handle);
+	if (channel == NULL) {
+		return -ENODEV;
+	}
+
+	devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+	if (devAttr->config.transferType != transferType) {
+		return -EINVAL;
+	}
+
+	/* We keep track of the information about the previous request for this */
+	/* device, and if the attributes match, then we can use the descriptors we setup */
+	/* the last time, and not have to reinitialize everything. */
+
+	{
+		rc =
+		     dma_alloc_descriptors(handle, transferType, srcData,
+					   dstData, numBytes);
+		if (rc != 0) {
+			return rc;
+		}
+	}
+
+	/* And kick off the transfer */
+
+	devAttr->numBytes = numBytes;
+	devAttr->transferStartTime = timer_get_tick_count();
+
+	dmacHw_initiateTransfer(channel->dmacHwHandle, &devAttr->config,
+				devAttr->ring.virtAddr);
+
+	/* Since we got this far, everything went successfully */
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_transfer);
+
+/****************************************************************************/
+/**
+*   Set the callback function which will be called when a transfer completes.
+*   If a NULL callback function is set, then no callback will occur.
+*
+*   @note   @a devHandler will be called from IRQ context.
+*
+*   @return
+*       0       - Success
+*       -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_set_device_handler(DMA_Device_t dev,	/* Device to set the callback for. */
+			   DMA_DeviceHandler_t devHandler,	/* Function to call when the DMA completes */
+			   void *userData	/* Pointer which will be passed to devHandler. */
+    ) {
+	DMA_DeviceAttribute_t *devAttr;
+	unsigned long flags;
+
+	if (!IsDeviceValid(dev)) {
+		return -ENODEV;
+	}
+	devAttr = &DMA_gDeviceAttribute[dev];
+
+	local_irq_save(flags);
+
+	devAttr->userData = userData;
+	devAttr->devHandler = devHandler;
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_set_device_handler);
+
+/****************************************************************************/
+/**
+*   Initializes a memory mapping structure
+*/
+/****************************************************************************/
+
+int dma_init_mem_map(DMA_MemMap_t *memMap)
+{
+	memset(memMap, 0, sizeof(*memMap));
+
+	init_MUTEX(&memMap->lock);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_init_mem_map);
+
+/****************************************************************************/
+/**
+*   Releases any memory currently being held by a memory mapping structure.
+*/
+/****************************************************************************/
+
+int dma_term_mem_map(DMA_MemMap_t *memMap)
+{
+	down(&memMap->lock);	/* Just being paranoid */
+
+	/* Free up any allocated memory */
+
+	up(&memMap->lock);
+	memset(memMap, 0, sizeof(*memMap));
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_term_mem_map);
+
+/****************************************************************************/
+/**
+*   Looks at a memory address and categorizes it.
+*
+*   @return One of the values from the DMA_MemType_t enumeration.
+*/
+/****************************************************************************/
+
+DMA_MemType_t dma_mem_type(void *addr)
+{
+	unsigned long addrVal = (unsigned long)addr;
+
+	if (addrVal >= VMALLOC_END) {
+		/* NOTE: DMA virtual memory space starts at 0xFFxxxxxx */
+
+		/* dma_alloc_xxx pages are physically and virtually contiguous */
+
+		return DMA_MEM_TYPE_DMA;
+	}
+
+	/* Technically, we could add one more classification. Addresses between VMALLOC_END */
+	/* and the beginning of the DMA virtual address could be considered to be I/O space. */
+	/* Right now, nobody cares about this particular classification, so we ignore it. */
+
+	if (is_vmalloc_addr(addr)) {
+		/* Address comes from the vmalloc'd region. Pages are virtually */
+		/* contiguous but NOT physically contiguous */
+
+		return DMA_MEM_TYPE_VMALLOC;
+	}
+
+	if (addrVal >= PAGE_OFFSET) {
+		/* PAGE_OFFSET is typically 0xC0000000 */
+
+		/* kmalloc'd pages are physically contiguous */
+
+		return DMA_MEM_TYPE_KMALLOC;
+	}
+
+	return DMA_MEM_TYPE_USER;
+}
+
+EXPORT_SYMBOL(dma_mem_type);
+
+/****************************************************************************/
+/**
+*   Looks at a memory address and determines if we support DMA'ing to/from
+*   that type of memory.
+*
+*   @return boolean -
+*               return value != 0 means dma supported
+*               return value == 0 means dma not supported
+*/
+/****************************************************************************/
+
+int dma_mem_supports_dma(void *addr)
+{
+	DMA_MemType_t memType = dma_mem_type(addr);
+
+	return (memType == DMA_MEM_TYPE_DMA)
+#if ALLOW_MAP_OF_KMALLOC_MEMORY
+	    || (memType == DMA_MEM_TYPE_KMALLOC)
+#endif
+	    || (memType == DMA_MEM_TYPE_USER);
+}
+
+EXPORT_SYMBOL(dma_mem_supports_dma);
+
+/****************************************************************************/
+/**
+*   Maps in a memory region such that it can be used for performing a DMA.
+*
+*   @return
+*/
+/****************************************************************************/
+
+int dma_map_start(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+		  enum dma_data_direction dir	/* Direction that the mapping will be going */
+    ) {
+	int rc;
+
+	down(&memMap->lock);
+
+	DMA_MAP_PRINT("memMap: %p\n", memMap);
+
+	if (memMap->inUse) {
+		printk(KERN_ERR "%s: memory map %p is already being used\n",
+		       __func__, memMap);
+		rc = -EBUSY;
+		goto out;
+	}
+
+	memMap->inUse = 1;
+	memMap->dir = dir;
+	memMap->numRegionsUsed = 0;
+
+	rc = 0;
+
+out:
+
+	DMA_MAP_PRINT("returning %d", rc);
+
+	up(&memMap->lock);
+
+	return rc;
+}
+
+EXPORT_SYMBOL(dma_map_start);
+
+/****************************************************************************/
+/**
+*   Adds a segment of memory to a memory map. Each segment is both
+*   physically and virtually contiguous.
+*
+*   @return     0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+static int dma_map_add_segment(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+			       DMA_Region_t *region,	/* Region that the segment belongs to */
+			       void *virtAddr,	/* Virtual address of the segment being added */
+			       dma_addr_t physAddr,	/* Physical address of the segment being added */
+			       size_t numBytes	/* Number of bytes of the segment being added */
+    ) {
+	DMA_Segment_t *segment;
+
+	DMA_MAP_PRINT("memMap:%p va:%p pa:0x%x #:%d\n", memMap, virtAddr,
+		      physAddr, numBytes);
+
+	/* Sanity check */
+
+	if (((unsigned long)virtAddr < (unsigned long)region->virtAddr)
+	    || (((unsigned long)virtAddr + numBytes)) >
+	    ((unsigned long)region->virtAddr + region->numBytes)) {
+		printk(KERN_ERR
+		       "%s: virtAddr %p is outside region @ %p len: %d\n",
+		       __func__, virtAddr, region->virtAddr, region->numBytes);
+		return -EINVAL;
+	}
+
+	if (region->numSegmentsUsed > 0) {
+		/* Check to see if this segment is physically contiguous with the previous one */
+
+		segment = &region->segment[region->numSegmentsUsed - 1];
+
+		if ((segment->physAddr + segment->numBytes) == physAddr) {
+			/* It is - just add on to the end */
+
+			DMA_MAP_PRINT("appending %d bytes to last segment\n",
+				      numBytes);
+
+			segment->numBytes += numBytes;
+
+			return 0;
+		}
+	}
+
+	/* Reallocate to hold more segments, if required. */
+
+	if (region->numSegmentsUsed >= region->numSegmentsAllocated) {
+		DMA_Segment_t *newSegment;
+		size_t oldSize =
+		    region->numSegmentsAllocated * sizeof(*newSegment);
+		int newAlloc = region->numSegmentsAllocated + 4;
+		size_t newSize = newAlloc * sizeof(*newSegment);
+
+		newSegment = kmalloc(newSize, GFP_KERNEL);
+		if (newSegment == NULL) {
+			return -ENOMEM;
+		}
+		memcpy(newSegment, region->segment, oldSize);
+		memset(&((uint8_t *) newSegment)[oldSize], 0,
+		       newSize - oldSize);
+		kfree(region->segment);
+
+		region->numSegmentsAllocated = newAlloc;
+		region->segment = newSegment;
+	}
+
+	segment = &region->segment[region->numSegmentsUsed];
+	region->numSegmentsUsed++;
+
+	segment->virtAddr = virtAddr;
+	segment->physAddr = physAddr;
+	segment->numBytes = numBytes;
+
+	DMA_MAP_PRINT("returning success\n");
+
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*   Adds a region of memory to a memory map. Each region is virtually
+*   contiguous, but not necessarily physically contiguous.
+*
+*   @return     0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_add_region(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+		       void *mem,	/* Virtual address that we want to get a map of */
+		       size_t numBytes	/* Number of bytes being mapped */
+    ) {
+	unsigned long addr = (unsigned long)mem;
+	unsigned int offset;
+	int rc = 0;
+	DMA_Region_t *region;
+	dma_addr_t physAddr;
+
+	down(&memMap->lock);
+
+	DMA_MAP_PRINT("memMap:%p va:%p #:%d\n", memMap, mem, numBytes);
+
+	if (!memMap->inUse) {
+		printk(KERN_ERR "%s: Make sure you call dma_map_start first\n",
+		       __func__);
+		rc = -EINVAL;
+		goto out;
+	}
+
+	/* Reallocate to hold more regions. */
+
+	if (memMap->numRegionsUsed >= memMap->numRegionsAllocated) {
+		DMA_Region_t *newRegion;
+		size_t oldSize =
+		    memMap->numRegionsAllocated * sizeof(*newRegion);
+		int newAlloc = memMap->numRegionsAllocated + 4;
+		size_t newSize = newAlloc * sizeof(*newRegion);
+
+		newRegion = kmalloc(newSize, GFP_KERNEL);
+		if (newRegion == NULL) {
+			rc = -ENOMEM;
+			goto out;
+		}
+		memcpy(newRegion, memMap->region, oldSize);
+		memset(&((uint8_t *) newRegion)[oldSize], 0, newSize - oldSize);
+
+		kfree(memMap->region);
+
+		memMap->numRegionsAllocated = newAlloc;
+		memMap->region = newRegion;
+	}
+
+	region = &memMap->region[memMap->numRegionsUsed];
+	memMap->numRegionsUsed++;
+
+	offset = addr & ~PAGE_MASK;
+
+	region->memType = dma_mem_type(mem);
+	region->virtAddr = mem;
+	region->numBytes = numBytes;
+	region->numSegmentsUsed = 0;
+	region->numLockedPages = 0;
+	region->lockedPages = NULL;
+
+	switch (region->memType) {
+	case DMA_MEM_TYPE_VMALLOC:
+		{
+			atomic_inc(&gDmaStatMemTypeVmalloc);
+
+			/* printk(KERN_ERR "%s: vmalloc'd pages are not supported\n", __func__); */
+
+			/* vmalloc'd pages are not physically contiguous */
+
+			rc = -EINVAL;
+			break;
+		}
+
+	case DMA_MEM_TYPE_KMALLOC:
+		{
+			atomic_inc(&gDmaStatMemTypeKmalloc);
+
+			/* kmalloc'd pages are physically contiguous, so they'll have exactly */
+			/* one segment */
+
+#if ALLOW_MAP_OF_KMALLOC_MEMORY
+			physAddr =
+			    dma_map_single(NULL, mem, numBytes, memMap->dir);
+			rc = dma_map_add_segment(memMap, region, mem, physAddr,
+						 numBytes);
+#else
+			rc = -EINVAL;
+#endif
+			break;
+		}
+
+	case DMA_MEM_TYPE_DMA:
+		{
+			/* dma_alloc_xxx pages are physically contiguous */
+
+			atomic_inc(&gDmaStatMemTypeCoherent);
+
+			physAddr = (vmalloc_to_pfn(mem) << PAGE_SHIFT) + offset;
+
+			dma_sync_single_for_cpu(NULL, physAddr, numBytes,
+						memMap->dir);
+			rc = dma_map_add_segment(memMap, region, mem, physAddr,
+						 numBytes);
+			break;
+		}
+
+	case DMA_MEM_TYPE_USER:
+		{
+			size_t firstPageOffset;
+			size_t firstPageSize;
+			struct page **pages;
+			struct task_struct *userTask;
+
+			atomic_inc(&gDmaStatMemTypeUser);
+
+#if 1
+			/* If the pages are user pages, then the dma_mem_map_set_user_task function */
+			/* must have been previously called. */
+
+			if (memMap->userTask == NULL) {
+				printk(KERN_ERR
+				       "%s: must call dma_mem_map_set_user_task when using user-mode memory\n",
+				       __func__);
+				return -EINVAL;
+			}
+
+			/* User pages need to be locked. */
+
+			firstPageOffset =
+			    (unsigned long)region->virtAddr & (PAGE_SIZE - 1);
+			firstPageSize = PAGE_SIZE - firstPageOffset;
+
+			region->numLockedPages = (firstPageOffset
+						  + region->numBytes +
+						  PAGE_SIZE - 1) / PAGE_SIZE;
+			pages =
+			    kmalloc(region->numLockedPages *
+				    sizeof(struct page *), GFP_KERNEL);
+
+			if (pages == NULL) {
+				region->numLockedPages = 0;
+				return -ENOMEM;
+			}
+
+			userTask = memMap->userTask;
+
+			down_read(&userTask->mm->mmap_sem);
+			rc = get_user_pages(userTask,	/* task */
+					    userTask->mm,	/* mm */
+					    (unsigned long)region->virtAddr,	/* start */
+					    region->numLockedPages,	/* len */
+					    memMap->dir == DMA_FROM_DEVICE,	/* write */
+					    0,	/* force */
+					    pages,	/* pages (array of pointers to page) */
+					    NULL);	/* vmas */
+			up_read(&userTask->mm->mmap_sem);
+
+			if (rc != region->numLockedPages) {
+				kfree(pages);
+				region->numLockedPages = 0;
+
+				if (rc >= 0) {
+					rc = -EINVAL;
+				}
+			} else {
+				uint8_t *virtAddr = region->virtAddr;
+				size_t bytesRemaining;
+				int pageIdx;
+
+				rc = 0;	/* Since get_user_pages returns +ve number */
+
+				region->lockedPages = pages;
+
+				/* We've locked the user pages. Now we need to walk them and figure */
+				/* out the physical addresses. */
+
+				/* The first page may be partial */
+
+				dma_map_add_segment(memMap,
+						    region,
+						    virtAddr,
+						    PFN_PHYS(page_to_pfn
+							     (pages[0])) +
+						    firstPageOffset,
+						    firstPageSize);
+
+				virtAddr += firstPageSize;
+				bytesRemaining =
+				    region->numBytes - firstPageSize;
+
+				for (pageIdx = 1;
+				     pageIdx < region->numLockedPages;
+				     pageIdx++) {
+					size_t bytesThisPage =
+					    (bytesRemaining >
+					     PAGE_SIZE ? PAGE_SIZE :
+					     bytesRemaining);
+
+					DMA_MAP_PRINT
+					    ("pageIdx:%d pages[pageIdx]=%p pfn=%u phys=%u\n",
+					     pageIdx, pages[pageIdx],
+					     page_to_pfn(pages[pageIdx]),
+					     PFN_PHYS(page_to_pfn
+						      (pages[pageIdx])));
+
+					dma_map_add_segment(memMap,
+							    region,
+							    virtAddr,
+							    PFN_PHYS(page_to_pfn
+								     (pages
+								      [pageIdx])),
+							    bytesThisPage);
+
+					virtAddr += bytesThisPage;
+					bytesRemaining -= bytesThisPage;
+				}
+			}
+#else
+			printk(KERN_ERR
+			       "%s: User mode pages are not yet supported\n",
+			       __func__);
+
+			/* user pages are not physically contiguous */
+
+			rc = -EINVAL;
+#endif
+			break;
+		}
+
+	default:
+		{
+			printk(KERN_ERR "%s: Unsupported memory type: %d\n",
+			       __func__, region->memType);
+
+			rc = -EINVAL;
+			break;
+		}
+	}
+
+	if (rc != 0) {
+		memMap->numRegionsUsed--;
+	}
+
+out:
+
+	DMA_MAP_PRINT("returning %d\n", rc);
+
+	up(&memMap->lock);
+
+	return rc;
+}
+
+EXPORT_SYMBOL(dma_map_add_segment);
+
+/****************************************************************************/
+/**
+*   Maps in a memory region such that it can be used for performing a DMA.
+*
+*   @return     0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_mem(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+		void *mem,	/* Virtual address that we want to get a map of */
+		size_t numBytes,	/* Number of bytes being mapped */
+		enum dma_data_direction dir	/* Direction that the mapping will be going */
+    ) {
+	int rc;
+
+	rc = dma_map_start(memMap, dir);
+	if (rc == 0) {
+		rc = dma_map_add_region(memMap, mem, numBytes);
+		if (rc < 0) {
+			/* Since the add fails, this function will fail, and the caller won't */
+			/* call unmap, so we need to do it here. */
+
+			dma_unmap(memMap, 0);
+		}
+	}
+
+	return rc;
+}
+
+EXPORT_SYMBOL(dma_map_mem);
+
+/****************************************************************************/
+/**
+*   Setup a descriptor ring for a given memory map.
+*
+*   It is assumed that the descriptor ring has already been initialized, and
+*   this routine will only reallocate a new descriptor ring if the existing
+*   one is too small.
+*
+*   @return     0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_create_descriptor_ring(DMA_Device_t dev,	/* DMA device (where the ring is stored) */
+				   DMA_MemMap_t *memMap,	/* Memory map that will be used */
+				   dma_addr_t devPhysAddr	/* Physical address of device */
+    ) {
+	int rc;
+	int numDescriptors;
+	DMA_DeviceAttribute_t *devAttr;
+	DMA_Region_t *region;
+	DMA_Segment_t *segment;
+	dma_addr_t srcPhysAddr;
+	dma_addr_t dstPhysAddr;
+	int regionIdx;
+	int segmentIdx;
+
+	devAttr = &DMA_gDeviceAttribute[dev];
+
+	down(&memMap->lock);
+
+	/* Figure out how many descriptors we need */
+
+	numDescriptors = 0;
+	for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
+		region = &memMap->region[regionIdx];
+
+		for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
+		     segmentIdx++) {
+			segment = &region->segment[segmentIdx];
+
+			if (memMap->dir == DMA_TO_DEVICE) {
+				srcPhysAddr = segment->physAddr;
+				dstPhysAddr = devPhysAddr;
+			} else {
+				srcPhysAddr = devPhysAddr;
+				dstPhysAddr = segment->physAddr;
+			}
+
+			rc =
+			     dma_calculate_descriptor_count(dev, srcPhysAddr,
+							    dstPhysAddr,
+							    segment->
+							    numBytes);
+			if (rc < 0) {
+				printk(KERN_ERR
+				       "%s: dma_calculate_descriptor_count failed: %d\n",
+				       __func__, rc);
+				goto out;
+			}
+			numDescriptors += rc;
+		}
+	}
+
+	/* Adjust the size of the ring, if it isn't big enough */
+
+	if (numDescriptors > devAttr->ring.descriptorsAllocated) {
+		dma_free_descriptor_ring(&devAttr->ring);
+		rc =
+		     dma_alloc_descriptor_ring(&devAttr->ring,
+					       numDescriptors);
+		if (rc < 0) {
+			printk(KERN_ERR
+			       "%s: dma_alloc_descriptor_ring failed: %d\n",
+			       __func__, rc);
+			goto out;
+		}
+	} else {
+		rc =
+		     dma_init_descriptor_ring(&devAttr->ring,
+					      numDescriptors);
+		if (rc < 0) {
+			printk(KERN_ERR
+			       "%s: dma_init_descriptor_ring failed: %d\n",
+			       __func__, rc);
+			goto out;
+		}
+	}
+
+	/* Populate the descriptors */
+
+	for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
+		region = &memMap->region[regionIdx];
+
+		for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
+		     segmentIdx++) {
+			segment = &region->segment[segmentIdx];
+
+			if (memMap->dir == DMA_TO_DEVICE) {
+				srcPhysAddr = segment->physAddr;
+				dstPhysAddr = devPhysAddr;
+			} else {
+				srcPhysAddr = devPhysAddr;
+				dstPhysAddr = segment->physAddr;
+			}
+
+			rc =
+			     dma_add_descriptors(&devAttr->ring, dev,
+						 srcPhysAddr, dstPhysAddr,
+						 segment->numBytes);
+			if (rc < 0) {
+				printk(KERN_ERR
+				       "%s: dma_add_descriptors failed: %d\n",
+				       __func__, rc);
+				goto out;
+			}
+		}
+	}
+
+	rc = 0;
+
+out:
+
+	up(&memMap->lock);
+	return rc;
+}
+
+EXPORT_SYMBOL(dma_map_create_descriptor_ring);
+
+/****************************************************************************/
+/**
+*   Maps in a memory region such that it can be used for performing a DMA.
+*
+*   @return
+*/
+/****************************************************************************/
+
+int dma_unmap(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+	      int dirtied	/* non-zero if any of the pages were modified */
+    ) {
+	int regionIdx;
+	int segmentIdx;
+	DMA_Region_t *region;
+	DMA_Segment_t *segment;
+
+	for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
+		region = &memMap->region[regionIdx];
+
+		for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
+		     segmentIdx++) {
+			segment = &region->segment[segmentIdx];
+
+			switch (region->memType) {
+			case DMA_MEM_TYPE_VMALLOC:
+				{
+					printk(KERN_ERR
+					       "%s: vmalloc'd pages are not yet supported\n",
+					       __func__);
+					return -EINVAL;
+				}
+
+			case DMA_MEM_TYPE_KMALLOC:
+				{
+#if ALLOW_MAP_OF_KMALLOC_MEMORY
+					dma_unmap_single(NULL,
+							 segment->physAddr,
+							 segment->numBytes,
+							 memMap->dir);
+#endif
+					break;
+				}
+
+			case DMA_MEM_TYPE_DMA:
+				{
+					dma_sync_single_for_cpu(NULL,
+								segment->
+								physAddr,
+								segment->
+								numBytes,
+								memMap->dir);
+					break;
+				}
+
+			case DMA_MEM_TYPE_USER:
+				{
+					/* Nothing to do here. */
+
+					break;
+				}
+
+			default:
+				{
+					printk(KERN_ERR
+					       "%s: Unsupported memory type: %d\n",
+					       __func__, region->memType);
+					return -EINVAL;
+				}
+			}
+
+			segment->virtAddr = NULL;
+			segment->physAddr = 0;
+			segment->numBytes = 0;
+		}
+
+		if (region->numLockedPages > 0) {
+			int pageIdx;
+
+			/* Some user pages were locked. We need to go and unlock them now. */
+
+			for (pageIdx = 0; pageIdx < region->numLockedPages;
+			     pageIdx++) {
+				struct page *page =
+				    region->lockedPages[pageIdx];
+
+				if (memMap->dir == DMA_FROM_DEVICE) {
+					SetPageDirty(page);
+				}
+				page_cache_release(page);
+			}
+			kfree(region->lockedPages);
+			region->numLockedPages = 0;
+			region->lockedPages = NULL;
+		}
+
+		region->memType = DMA_MEM_TYPE_NONE;
+		region->virtAddr = NULL;
+		region->numBytes = 0;
+		region->numSegmentsUsed = 0;
+	}
+	memMap->userTask = NULL;
+	memMap->numRegionsUsed = 0;
+	memMap->inUse = 0;
+
+	up(&memMap->lock);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_unmap);
-- 
cgit v1.2.3


From 34559125742645843bc7639900c7b4737ec12b72 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:01:47 +0100
Subject: ARM: 5649/1: bcmring: add bcmring timer function

bcmring timer helper function, hardware register headers

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/include/mach/timer.h | 77 ++++++++++++++++++++++++++++++
 arch/arm/mach-bcmring/include/mach/timex.h | 25 ++++++++++
 arch/arm/mach-bcmring/timer.c              | 62 ++++++++++++++++++++++++
 3 files changed, 164 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/mach/timer.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/timex.h
 create mode 100644 arch/arm/mach-bcmring/timer.c

(limited to 'arch/arm')

diff --git a/arch/arm/mach-bcmring/include/mach/timer.h b/arch/arm/mach-bcmring/include/mach/timer.h
new file mode 100644
index 00000000000..5a94bbb032b
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/timer.h
@@ -0,0 +1,77 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/*
+*
+*****************************************************************************
+*
+*  timer.h
+*
+*  PURPOSE:
+*
+*
+*
+*  NOTES:
+*
+*****************************************************************************/
+
+#if !defined(BCM_LINUX_TIMER_H)
+#define BCM_LINUX_TIMER_H
+
+#if defined(__KERNEL__)
+
+/* ---- Include Files ---------------------------------------------------- */
+/* ---- Constants and Types ---------------------------------------------- */
+
+typedef unsigned int timer_tick_count_t;
+typedef unsigned int timer_tick_rate_t;
+typedef unsigned int timer_msec_t;
+
+/* ---- Variable Externs ------------------------------------------------- */
+/* ---- Function Prototypes ---------------------------------------------- */
+
+/****************************************************************************
+*
+*  timer_get_tick_count
+*
+*
+***************************************************************************/
+timer_tick_count_t timer_get_tick_count(void);
+
+/****************************************************************************
+*
+*  timer_get_tick_rate
+*
+*
+***************************************************************************/
+timer_tick_rate_t timer_get_tick_rate(void);
+
+/****************************************************************************
+*
+*  timer_get_msec
+*
+*
+***************************************************************************/
+timer_msec_t timer_get_msec(void);
+
+/****************************************************************************
+*
+*  timer_ticks_to_msec
+*
+*
+***************************************************************************/
+timer_msec_t timer_ticks_to_msec(timer_tick_count_t ticks);
+
+#endif /* __KERNEL__ */
+#endif /* BCM_LINUX_TIMER_H */
diff --git a/arch/arm/mach-bcmring/include/mach/timex.h b/arch/arm/mach-bcmring/include/mach/timex.h
new file mode 100644
index 00000000000..40d033ec589
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/timex.h
@@ -0,0 +1,25 @@
+/*
+ *
+ *  Integrator architecture timex specifications
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * Specifies the number of ticks per second
+ */
+#define CLOCK_TICK_RATE		100000 /* REG_SMT_TICKS_PER_SEC */
diff --git a/arch/arm/mach-bcmring/timer.c b/arch/arm/mach-bcmring/timer.c
new file mode 100644
index 00000000000..2d415d2a8e6
--- /dev/null
+++ b/arch/arm/mach-bcmring/timer.c
@@ -0,0 +1,62 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <csp/tmrHw.h>
+
+#include <mach/timer.h>
+/* The core.c file initializes timers 1 and 3 as a linux clocksource. */
+/* The real time clock should probably be the real linux clocksource. */
+/* In the meantime, this file should agree with core.c as to the */
+/* profiling timer. If the clocksource is moved to rtc later, then */
+/* we can init the profiling timer here instead. */
+
+/* Timer 1 provides 25MHz resolution syncrhonized to scheduling and APM timing */
+/* Timer 3 provides bus freqeuncy sychronized to ACLK, but spread spectrum will */
+/* affect synchronization with scheduling and APM timing. */
+
+#define PROF_TIMER 1
+
+timer_tick_rate_t timer_get_tick_rate(void)
+{
+	return tmrHw_getCountRate(PROF_TIMER);
+}
+
+timer_tick_count_t timer_get_tick_count(void)
+{
+	return tmrHw_GetCurrentCount(PROF_TIMER);	/* change downcounter to upcounter */
+}
+
+timer_msec_t timer_ticks_to_msec(timer_tick_count_t ticks)
+{
+	static int tickRateMsec;
+
+	if (tickRateMsec == 0) {
+		tickRateMsec = timer_get_tick_rate() / 1000;
+	}
+
+	return ticks / tickRateMsec;
+}
+
+timer_msec_t timer_get_msec(void)
+{
+	return timer_ticks_to_msec(timer_get_tick_count());
+}
+
+EXPORT_SYMBOL(timer_get_tick_count);
+EXPORT_SYMBOL(timer_ticks_to_msec);
+EXPORT_SYMBOL(timer_get_tick_rate);
+EXPORT_SYMBOL(timer_get_msec);
-- 
cgit v1.2.3


From 16f5875034fa9e36a72c4223c8ef42cfe461d766 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:02:21 +0100
Subject: ARM: 5650/1: bcmring: add io.h, uncompress. h, and entry-macro.S

add remaining header files in include/mach directory
add entry-macro.S file

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/include/mach/entry-macro.S | 86 ++++++++++++++++++++++++
 arch/arm/mach-bcmring/include/mach/io.h          | 56 +++++++++++++++
 arch/arm/mach-bcmring/include/mach/uncompress.h  | 43 ++++++++++++
 3 files changed, 185 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/mach/entry-macro.S
 create mode 100644 arch/arm/mach-bcmring/include/mach/io.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/uncompress.h

(limited to 'arch/arm')

diff --git a/arch/arm/mach-bcmring/include/mach/entry-macro.S b/arch/arm/mach-bcmring/include/mach/entry-macro.S
new file mode 100644
index 00000000000..7d393ca010a
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/entry-macro.S
@@ -0,0 +1,86 @@
+/*****************************************************************************
+* Copyright 2006 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/*
+ *
+ * Low-level IRQ helper macros for BCMRing-based platforms
+ *
+ */
+#include <mach/irqs.h>
+#include <mach/hardware.h>
+#include <mach/csp/mm_io.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\base, =(MM_IO_BASE_INTC0)
+		ldr	\irqstat, [\base, #0]		@ get status
+                ldr     \irqnr, [\base, #0x10]          @ mask with enable register
+                ands    \irqstat, \irqstat, \irqnr
+		mov	\irqnr, #IRQ_INTC0_START
+		cmp	\irqstat, #0
+		bne	1001f
+
+		ldr	\base, =(MM_IO_BASE_INTC1)
+		ldr	\irqstat, [\base, #0]		@ get status
+                ldr     \irqnr, [\base, #0x10]          @ mask with enable register
+                ands    \irqstat, \irqstat, \irqnr
+		mov	\irqnr, #IRQ_INTC1_START
+		cmp	\irqstat, #0
+		bne	1001f
+
+		ldr	\base, =(MM_IO_BASE_SINTC)
+		ldr	\irqstat, [\base, #0]		@ get status
+                ldr     \irqnr, [\base, #0x10]          @ mask with enable register
+                ands    \irqstat, \irqstat, \irqnr
+		mov	\irqnr, #0xffffffff             @ code meaning no interrupt bits set
+		cmp	\irqstat, #0
+		beq	1002f
+
+		mov	\irqnr, #IRQ_SINTC_START        @ something is set, so fixup return value
+
+1001:
+		movs	\tmp, \irqstat, lsl #16
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #16
+
+		movs	\tmp, \irqstat, lsl #8
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #8
+
+		movs	\tmp, \irqstat, lsl #4
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #4
+
+		movs	\tmp, \irqstat, lsl #2
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #2
+
+		movs	\tmp, \irqstat, lsl #1
+		addeq	\irqnr, \irqnr, #1
+		orrs	\base, \base, #1
+
+1002:           @ irqnr will be set to 0xffffffff if no irq bits are set
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	irq_prio_table
+		.endm
+
diff --git a/arch/arm/mach-bcmring/include/mach/io.h b/arch/arm/mach-bcmring/include/mach/io.h
new file mode 100644
index 00000000000..4db0eff9035
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/io.h
@@ -0,0 +1,56 @@
+/*
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)         ((void __iomem *)HW_IO_PHYS_TO_VIRT(a))
+
+/* Do not enable mem_pci for a big endian arm architecture or unexpected byteswaps will */
+/* happen in readw/writew etc. */
+
+#define readb(c)        __raw_readb(c)
+#define readw(c)        __raw_readw(c)
+#define readl(c)        __raw_readl(c)
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+
+#define readsb(p, d, l)   __raw_readsb(p, d, l)
+#define readsw(p, d, l)   __raw_readsw(p, d, l)
+#define readsl(p, d, l)   __raw_readsl(p, d, l)
+
+#define writeb(v, c)     __raw_writeb(v, c)
+#define writew(v, c)     __raw_writew(v, c)
+#define writel(v, c)     __raw_writel(v, c)
+
+#define writesb(p, d, l)  __raw_writesb(p, d, l)
+#define writesw(p, d, l)  __raw_writesw(p, d, l)
+#define writesl(p, d, l)  __raw_writesl(p, d, l)
+
+#define memset_io(c, v, l)    _memset_io((c), (v), (l))
+#define memcpy_fromio(a, c, l)    _memcpy_fromio((a), (c), (l))
+#define memcpy_toio(c, a, l)  _memcpy_toio((c), (a), (l))
+
+#define eth_io_copy_and_sum(s, c, l, b) eth_copy_and_sum((s), (c), (l), (b))
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/uncompress.h b/arch/arm/mach-bcmring/include/mach/uncompress.h
new file mode 100644
index 00000000000..9c9821b7797
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/uncompress.h
@@ -0,0 +1,43 @@
+/*****************************************************************************
+* Copyright 2005 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+#include <mach/csp/mm_addr.h>
+
+#define BCMRING_UART_0_DR (*(volatile unsigned int *)MM_ADDR_IO_UARTA)
+#define BCMRING_UART_0_FR (*(volatile unsigned int *)(MM_ADDR_IO_UARTA + 0x18))
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+	/* Send out UARTA */
+	while (BCMRING_UART_0_FR & (1 << 5))
+		;
+
+	BCMRING_UART_0_DR = c;
+}
+
+
+static inline void flush(void)
+{
+	/* Wait for the tx fifo to be empty */
+	while ((BCMRING_UART_0_FR & (1 << 7)) == 0)
+		;
+
+	/* Wait for the final character to be sent on the txd line */
+	while (BCMRING_UART_0_FR & (1 << 3))
+		;
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
-- 
cgit v1.2.3


From 7bab8bfc7f1060e3ab4bc0a90813a9338e6994b9 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:02:59 +0100
Subject: ARM: 5651/1: bcmring: csp capability header files

add mach-bcmring csp capability header files

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/include/mach/csp/cap.h       |  63 ++++
 .../arm/mach-bcmring/include/mach/csp/cap_inline.h | 409 +++++++++++++++++++++
 arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h    |  73 ++++
 3 files changed, 545 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/cap.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/cap_inline.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h

(limited to 'arch/arm')

diff --git a/arch/arm/mach-bcmring/include/mach/csp/cap.h b/arch/arm/mach-bcmring/include/mach/csp/cap.h
new file mode 100644
index 00000000000..30fa2d54063
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/cap.h
@@ -0,0 +1,63 @@
+/*****************************************************************************
+* Copyright 2009 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CAP_H
+#define CAP_H
+
+/* ---- Include Files ---------------------------------------------------- */
+/* ---- Public Constants and Types --------------------------------------- */
+typedef enum {
+	CAP_NOT_PRESENT = 0,
+	CAP_PRESENT
+} CAP_RC_T;
+
+typedef enum {
+	CAP_VPM,
+	CAP_ETH_PHY,
+	CAP_ETH_GMII,
+	CAP_ETH_SGMII,
+	CAP_USB,
+	CAP_TSC,
+	CAP_EHSS,
+	CAP_SDIO,
+	CAP_UARTB,
+	CAP_KEYPAD,
+	CAP_CLCD,
+	CAP_GE,
+	CAP_LEDM,
+	CAP_BBL,
+	CAP_VDEC,
+	CAP_PIF,
+	CAP_APM,
+	CAP_SPU,
+	CAP_PKA,
+	CAP_RNG,
+} CAP_CAPABILITY_T;
+
+typedef enum {
+	CAP_LCD_WVGA = 0,
+	CAP_LCD_VGA = 0x1,
+	CAP_LCD_WQVGA = 0x2,
+	CAP_LCD_QVGA = 0x3
+} CAP_LCD_RES_T;
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+static inline CAP_RC_T cap_isPresent(CAP_CAPABILITY_T capability, int index);
+static inline uint32_t cap_getMaxArmSpeedHz(void);
+static inline uint32_t cap_getMaxVpmSpeedHz(void);
+static inline CAP_LCD_RES_T cap_getMaxLcdRes(void);
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h b/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h
new file mode 100644
index 00000000000..933ce68ed90
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h
@@ -0,0 +1,409 @@
+/*****************************************************************************
+* Copyright 2009 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CAP_INLINE_H
+#define CAP_INLINE_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <mach/csp/cap.h>
+#include <cfg_global.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+#define CAP_CONFIG0_VPM_DIS          0x00000001
+#define CAP_CONFIG0_ETH_PHY0_DIS     0x00000002
+#define CAP_CONFIG0_ETH_PHY1_DIS     0x00000004
+#define CAP_CONFIG0_ETH_GMII0_DIS    0x00000008
+#define CAP_CONFIG0_ETH_GMII1_DIS    0x00000010
+#define CAP_CONFIG0_ETH_SGMII0_DIS   0x00000020
+#define CAP_CONFIG0_ETH_SGMII1_DIS   0x00000040
+#define CAP_CONFIG0_USB0_DIS         0x00000080
+#define CAP_CONFIG0_USB1_DIS         0x00000100
+#define CAP_CONFIG0_TSC_DIS          0x00000200
+#define CAP_CONFIG0_EHSS0_DIS        0x00000400
+#define CAP_CONFIG0_EHSS1_DIS        0x00000800
+#define CAP_CONFIG0_SDIO0_DIS        0x00001000
+#define CAP_CONFIG0_SDIO1_DIS        0x00002000
+#define CAP_CONFIG0_UARTB_DIS        0x00004000
+#define CAP_CONFIG0_KEYPAD_DIS       0x00008000
+#define CAP_CONFIG0_CLCD_DIS         0x00010000
+#define CAP_CONFIG0_GE_DIS           0x00020000
+#define CAP_CONFIG0_LEDM_DIS         0x00040000
+#define CAP_CONFIG0_BBL_DIS          0x00080000
+#define CAP_CONFIG0_VDEC_DIS         0x00100000
+#define CAP_CONFIG0_PIF_DIS          0x00200000
+#define CAP_CONFIG0_RESERVED1_DIS    0x00400000
+#define CAP_CONFIG0_RESERVED2_DIS    0x00800000
+
+#define CAP_CONFIG1_APMA_DIS         0x00000001
+#define CAP_CONFIG1_APMB_DIS         0x00000002
+#define CAP_CONFIG1_APMC_DIS         0x00000004
+#define CAP_CONFIG1_CLCD_RES_MASK    0x00000600
+#define CAP_CONFIG1_CLCD_RES_SHIFT   9
+#define CAP_CONFIG1_CLCD_RES_WVGA    (CAP_LCD_WVGA << CAP_CONFIG1_CLCD_RES_SHIFT)
+#define CAP_CONFIG1_CLCD_RES_VGA     (CAP_LCD_VGA << CAP_CONFIG1_CLCD_RES_SHIFT)
+#define CAP_CONFIG1_CLCD_RES_WQVGA   (CAP_LCD_WQVGA << CAP_CONFIG1_CLCD_RES_SHIFT)
+#define CAP_CONFIG1_CLCD_RES_QVGA    (CAP_LCD_QVGA << CAP_CONFIG1_CLCD_RES_SHIFT)
+
+#define CAP_CONFIG2_SPU_DIS          0x00000010
+#define CAP_CONFIG2_PKA_DIS          0x00000020
+#define CAP_CONFIG2_RNG_DIS          0x00000080
+
+#if   (CFG_GLOBAL_CHIP == BCM11107)
+#define capConfig0 0
+#define capConfig1 CAP_CONFIG1_CLCD_RES_WVGA
+#define capConfig2 0
+#define CAP_APM_MAX_NUM_CHANS 3
+#elif (CFG_GLOBAL_CHIP == FPGA11107)
+#define capConfig0 0
+#define capConfig1 CAP_CONFIG1_CLCD_RES_WVGA
+#define capConfig2 0
+#define CAP_APM_MAX_NUM_CHANS 3
+#elif (CFG_GLOBAL_CHIP == BCM11109)
+#define capConfig0 (CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS)
+#define capConfig1 (CAP_CONFIG1_APMC_DIS | CAP_CONFIG1_CLCD_RES_WQVGA)
+#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS)
+#define CAP_APM_MAX_NUM_CHANS 2
+#elif (CFG_GLOBAL_CHIP == BCM11170)
+#define capConfig0 (CAP_CONFIG0_ETH_GMII0_DIS | CAP_CONFIG0_ETH_GMII1_DIS | CAP_CONFIG0_USB0_DIS | CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_TSC_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO0_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_UARTB_DIS | CAP_CONFIG0_CLCD_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS)
+#define capConfig1 (CAP_CONFIG1_APMC_DIS | CAP_CONFIG1_CLCD_RES_WQVGA)
+#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS)
+#define CAP_APM_MAX_NUM_CHANS 2
+#elif (CFG_GLOBAL_CHIP == BCM11110)
+#define capConfig0 (CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_TSC_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO0_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_UARTB_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS)
+#define capConfig1 CAP_CONFIG1_APMC_DIS
+#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS)
+#define CAP_APM_MAX_NUM_CHANS 2
+#elif (CFG_GLOBAL_CHIP == BCM11211)
+#define capConfig0 (CAP_CONFIG0_ETH_PHY0_DIS | CAP_CONFIG0_ETH_GMII0_DIS | CAP_CONFIG0_ETH_GMII1_DIS | CAP_CONFIG0_ETH_SGMII0_DIS | CAP_CONFIG0_ETH_SGMII1_DIS | CAP_CONFIG0_CLCD_DIS)
+#define capConfig1 CAP_CONFIG1_APMC_DIS
+#define capConfig2 0
+#define CAP_APM_MAX_NUM_CHANS 2
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+
+#if   ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == FPGA11107))
+#define CAP_HW_CFG_ARM_CLK_HZ 500000000
+#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
+#define CAP_HW_CFG_ARM_CLK_HZ 300000000
+#elif (CFG_GLOBAL_CHIP == BCM11211)
+#define CAP_HW_CFG_ARM_CLK_HZ 666666666
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+
+#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == BCM11211) || (CFG_GLOBAL_CHIP == FPGA11107))
+#define CAP_HW_CFG_VPM_CLK_HZ 333333333
+#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
+#define CAP_HW_CFG_VPM_CLK_HZ 200000000
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+/****************************************************************************
+*  cap_isPresent -
+*
+*  PURPOSE:
+*     Determines if the chip has a certain capability present
+*
+*  PARAMETERS:
+*     capability - type of capability to determine if present
+*
+*  RETURNS:
+*     CAP_PRESENT or CAP_NOT_PRESENT
+****************************************************************************/
+static inline CAP_RC_T cap_isPresent(CAP_CAPABILITY_T capability, int index)
+{
+	CAP_RC_T returnVal = CAP_NOT_PRESENT;
+
+	switch (capability) {
+	case CAP_VPM:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_VPM_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_ETH_PHY:
+		{
+			if ((index == 0)
+			    && (!(capConfig0 & CAP_CONFIG0_ETH_PHY0_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+			if ((index == 1)
+			    && (!(capConfig0 & CAP_CONFIG0_ETH_PHY1_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_ETH_GMII:
+		{
+			if ((index == 0)
+			    && (!(capConfig0 & CAP_CONFIG0_ETH_GMII0_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+			if ((index == 1)
+			    && (!(capConfig0 & CAP_CONFIG0_ETH_GMII1_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_ETH_SGMII:
+		{
+			if ((index == 0)
+			    && (!(capConfig0 & CAP_CONFIG0_ETH_SGMII0_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+			if ((index == 1)
+			    && (!(capConfig0 & CAP_CONFIG0_ETH_SGMII1_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_USB:
+		{
+			if ((index == 0)
+			    && (!(capConfig0 & CAP_CONFIG0_USB0_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+			if ((index == 1)
+			    && (!(capConfig0 & CAP_CONFIG0_USB1_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_TSC:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_TSC_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_EHSS:
+		{
+			if ((index == 0)
+			    && (!(capConfig0 & CAP_CONFIG0_EHSS0_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+			if ((index == 1)
+			    && (!(capConfig0 & CAP_CONFIG0_EHSS1_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_SDIO:
+		{
+			if ((index == 0)
+			    && (!(capConfig0 & CAP_CONFIG0_SDIO0_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+			if ((index == 1)
+			    && (!(capConfig0 & CAP_CONFIG0_SDIO1_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_UARTB:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_UARTB_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_KEYPAD:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_KEYPAD_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_CLCD:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_CLCD_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_GE:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_GE_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_LEDM:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_LEDM_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_BBL:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_BBL_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_VDEC:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_VDEC_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_PIF:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_PIF_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_APM:
+		{
+			if ((index == 0)
+			    && (!(capConfig1 & CAP_CONFIG1_APMA_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+			if ((index == 1)
+			    && (!(capConfig1 & CAP_CONFIG1_APMB_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+			if ((index == 2)
+			    && (!(capConfig1 & CAP_CONFIG1_APMC_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_SPU:
+		{
+			if (!(capConfig2 & CAP_CONFIG2_SPU_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_PKA:
+		{
+			if (!(capConfig2 & CAP_CONFIG2_PKA_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_RNG:
+		{
+			if (!(capConfig2 & CAP_CONFIG2_RNG_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	default:
+		{
+		}
+		break;
+	}
+	return returnVal;
+}
+
+/****************************************************************************
+*  cap_getMaxArmSpeedHz -
+*
+*  PURPOSE:
+*     Determines the maximum speed of the ARM CPU
+*
+*  PARAMETERS:
+*     none
+*
+*  RETURNS:
+*     clock speed in Hz that the ARM processor is able to run at
+****************************************************************************/
+static inline uint32_t cap_getMaxArmSpeedHz(void)
+{
+#if   ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == FPGA11107))
+	return 500000000;
+#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
+	return 300000000;
+#elif (CFG_GLOBAL_CHIP == BCM11211)
+	return 666666666;
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+}
+
+/****************************************************************************
+*  cap_getMaxVpmSpeedHz -
+*
+*  PURPOSE:
+*     Determines the maximum speed of the VPM
+*
+*  PARAMETERS:
+*     none
+*
+*  RETURNS:
+*     clock speed in Hz that the VPM is able to run at
+****************************************************************************/
+static inline uint32_t cap_getMaxVpmSpeedHz(void)
+{
+#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == BCM11211) || (CFG_GLOBAL_CHIP == FPGA11107))
+	return 333333333;
+#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
+	return 200000000;
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+}
+
+/****************************************************************************
+*  cap_getMaxLcdRes -
+*
+*  PURPOSE:
+*     Determines the maximum LCD resolution capabilities
+*
+*  PARAMETERS:
+*     none
+*
+*  RETURNS:
+*   CAP_LCD_WVGA, CAP_LCD_VGA, CAP_LCD_WQVGA or CAP_LCD_QVGA
+*
+****************************************************************************/
+static inline CAP_LCD_RES_T cap_getMaxLcdRes(void)
+{
+	return (CAP_LCD_RES_T)
+		((capConfig1 & CAP_CONFIG1_CLCD_RES_MASK) >>
+		 CAP_CONFIG1_CLCD_RES_SHIFT);
+}
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h b/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h
new file mode 100644
index 00000000000..cfa91bed9d3
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h
@@ -0,0 +1,73 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+#ifndef CSP_HW_CFG_H
+#define CSP_HW_CFG_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <cfg_global.h>
+#include <mach/csp/cap_inline.h>
+
+#if defined(__KERNEL__)
+#include <mach/memory_settings.h>
+#else
+#include <hw_cfg.h>
+#endif
+
+/* Some items that can be defined externally, but will be set to default values */
+/* if they are not defined. */
+/*      HW_CFG_PLL_SPREAD_SPECTRUM_DISABLE   Default undefined and SS is enabled. */
+/*      HW_CFG_SDRAM_CAS_LATENCY        5    Default 5, Values [3..6] */
+/*      HW_CFG_SDRAM_CHIP_SELECT_CNT    1    Default 1, Vaules [1..2] */
+/*      HW_CFG_SDRAM_SPEED_GRADE        667  Default 667, Values [400,533,667,800] */
+/*      HW_CFG_SDRAM_WIDTH_BITS         16   Default 16, Vaules [8,16] */
+/*      HW_CFG_SDRAM_ADDR_BRC                Default undefined and Row-Bank-Col (RBC) addressing used. Define to use Bank-Row-Col (BRC). */
+/*      HW_CFG_SDRAM_CLK_ASYNC               Default undefined and DDR clock is synchronous with AXI BUS clock. Define for ASYNC mode. */
+
+#if defined(CFG_GLOBAL_CHIP)
+  #if (CFG_GLOBAL_CHIP == FPGA11107)
+     #define HW_CFG_BUS_CLK_HZ            5000000
+     #define HW_CFG_DDR_CTLR_CLK_HZ      10000000
+     #define HW_CFG_DDR_PHY_OMIT
+     #define HW_CFG_UART_CLK_HZ           7500000
+  #else
+     #define HW_CFG_PLL_VCO_HZ           2000000000
+     #define HW_CFG_PLL2_VCO_HZ          1800000000
+     #define HW_CFG_ARM_CLK_HZ            CAP_HW_CFG_ARM_CLK_HZ
+     #define HW_CFG_BUS_CLK_HZ            166666666
+     #define HW_CFG_DDR_CTLR_CLK_HZ       333333333
+     #define HW_CFG_DDR_PHY_CLK_HZ        (2 * HW_CFG_DDR_CTLR_CLK_HZ)
+     #define HW_CFG_UART_CLK_HZ           142857142
+     #define HW_CFG_VPM_CLK_HZ            CAP_HW_CFG_VPM_CLK_HZ
+  #endif
+#else
+   #define HW_CFG_PLL_VCO_HZ           1800000000
+   #define HW_CFG_PLL2_VCO_HZ          1800000000
+   #define HW_CFG_ARM_CLK_HZ            450000000
+   #define HW_CFG_BUS_CLK_HZ            150000000
+   #define HW_CFG_DDR_CTLR_CLK_HZ       300000000
+   #define HW_CFG_DDR_PHY_CLK_HZ        (2 * HW_CFG_DDR_CTLR_CLK_HZ)
+   #define HW_CFG_UART_CLK_HZ           150000000
+   #define HW_CFG_VPM_CLK_HZ            300000000
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+
+#endif /* CSP_HW_CFG_H */
+
-- 
cgit v1.2.3


From 9133760f4b0c0628d45532aad17f59896cd7b57f Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:03:40 +0100
Subject: ARM: 5652/1: bcmring: add misc headers for csp code

add misc wrapper headers for csp code
add ddrc register header file

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/include/csp/cache.h        |  35 +
 arch/arm/mach-bcmring/include/csp/delay.h        |  36 +
 arch/arm/mach-bcmring/include/csp/errno.h        |  32 +
 arch/arm/mach-bcmring/include/csp/module.h       |  32 +
 arch/arm/mach-bcmring/include/csp/reg.h          | 114 +++
 arch/arm/mach-bcmring/include/csp/stdint.h       |  30 +
 arch/arm/mach-bcmring/include/csp/string.h       |  34 +
 arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h | 872 +++++++++++++++++++++++
 8 files changed, 1185 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/csp/cache.h
 create mode 100644 arch/arm/mach-bcmring/include/csp/delay.h
 create mode 100644 arch/arm/mach-bcmring/include/csp/errno.h
 create mode 100644 arch/arm/mach-bcmring/include/csp/module.h
 create mode 100644 arch/arm/mach-bcmring/include/csp/reg.h
 create mode 100644 arch/arm/mach-bcmring/include/csp/stdint.h
 create mode 100644 arch/arm/mach-bcmring/include/csp/string.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h

(limited to 'arch/arm')

diff --git a/arch/arm/mach-bcmring/include/csp/cache.h b/arch/arm/mach-bcmring/include/csp/cache.h
new file mode 100644
index 00000000000..caa20e59db9
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/cache.h
@@ -0,0 +1,35 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CSP_CACHE_H
+#define CSP_CACHE_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/stdint.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+#if defined(__KERNEL__) && !defined(STANDALONE)
+#include <asm/cacheflush.h>
+
+#define CSP_CACHE_FLUSH_ALL      flush_cache_all()
+
+#else
+
+#define CSP_CACHE_FLUSH_ALL
+
+#endif
+
+#endif /* CSP_CACHE_H */
diff --git a/arch/arm/mach-bcmring/include/csp/delay.h b/arch/arm/mach-bcmring/include/csp/delay.h
new file mode 100644
index 00000000000..8b3d8036729
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/delay.h
@@ -0,0 +1,36 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+#ifndef CSP_DELAY_H
+#define CSP_DELAY_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+/* Some CSP routines require use of the following delay routines. Use the OS */
+/* version if available, otherwise use a CSP specific definition. */
+/* void udelay(unsigned long usecs); */
+/* void mdelay(unsigned long msecs); */
+
+#if defined(__KERNEL__) && !defined(STANDALONE)
+   #include <linux/delay.h>
+#else
+   #include <mach/csp/delay.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /*  CSP_DELAY_H */
diff --git a/arch/arm/mach-bcmring/include/csp/errno.h b/arch/arm/mach-bcmring/include/csp/errno.h
new file mode 100644
index 00000000000..51357dd5b66
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/errno.h
@@ -0,0 +1,32 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CSP_ERRNO_H
+#define CSP_ERRNO_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#if   defined(__KERNEL__)
+#include <linux/errno.h>
+#elif defined(CSP_SIMULATION)
+#include <asm-generic/errno.h>
+#else
+#include <errno.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /* CSP_ERRNO_H */
diff --git a/arch/arm/mach-bcmring/include/csp/module.h b/arch/arm/mach-bcmring/include/csp/module.h
new file mode 100644
index 00000000000..c30d2a5975a
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/module.h
@@ -0,0 +1,32 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+#ifndef CSP_MODULE_H
+#define CSP_MODULE_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#ifdef __KERNEL__
+    #include <linux/module.h>
+#else
+    #define EXPORT_SYMBOL(symbol)
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+
+#endif /* CSP_MODULE_H */
diff --git a/arch/arm/mach-bcmring/include/csp/reg.h b/arch/arm/mach-bcmring/include/csp/reg.h
new file mode 100644
index 00000000000..e5f60bf5a1f
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/reg.h
@@ -0,0 +1,114 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    reg.h
+*
+*  @brief   Generic register defintions used in CSP
+*/
+/****************************************************************************/
+
+#ifndef CSP_REG_H
+#define CSP_REG_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/stdint.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+#define __REG32(x)      (*((volatile uint32_t *)(x)))
+#define __REG16(x)      (*((volatile uint16_t *)(x)))
+#define __REG8(x)       (*((volatile uint8_t *) (x)))
+
+/* Macros used to define a sequence of reserved registers. The start / end */
+/* are byte offsets in the particular register definition, with the "end" */
+/* being the offset of the next un-reserved register. E.g. if offsets */
+/* 0x10 through to 0x1f are reserved, then this reserved area could be */
+/* specified as follows. */
+/*  typedef struct */
+/*  { */
+/*      uint32_t reg1;           offset 0x00 */
+/*      uint32_t reg2;           offset 0x04 */
+/*      uint32_t reg3;           offset 0x08 */
+/*      uint32_t reg4;           offset 0x0c */
+/*      REG32_RSVD(0x10, 0x20); */
+/*      uint32_t reg5;           offset 0x20 */
+/*      ... */
+/*  } EXAMPLE_REG_t; */
+#define REG8_RSVD(start, end)   uint8_t rsvd_##start[(end - start) / sizeof(uint8_t)]
+#define REG16_RSVD(start, end)  uint16_t rsvd_##start[(end - start) / sizeof(uint16_t)]
+#define REG32_RSVD(start, end)  uint32_t rsvd_##start[(end - start) / sizeof(uint32_t)]
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+/* Note: When protecting multiple statements, the REG_LOCAL_IRQ_SAVE and */
+/* REG_LOCAL_IRQ_RESTORE must be enclosed in { } to allow the  */
+/* flags variable to be declared locally. */
+/* e.g. */
+/*    statement1; */
+/*    { */
+/*       REG_LOCAL_IRQ_SAVE; */
+/*       <multiple statements here> */
+/*       REG_LOCAL_IRQ_RESTORE; */
+/*    } */
+/*    statement2; */
+/*  */
+
+#if defined(__KERNEL__) && !defined(STANDALONE)
+#include <mach/hardware.h>
+#include <linux/interrupt.h>
+
+#define REG_LOCAL_IRQ_SAVE      HW_DECLARE_SPINLOCK(reg32) \
+	unsigned long flags; HW_IRQ_SAVE(reg32, flags)
+
+#define REG_LOCAL_IRQ_RESTORE   HW_IRQ_RESTORE(reg32, flags)
+
+#else
+
+#define REG_LOCAL_IRQ_SAVE
+#define REG_LOCAL_IRQ_RESTORE
+
+#endif
+
+static inline void reg32_modify_and(volatile uint32_t *reg, uint32_t value)
+{
+	REG_LOCAL_IRQ_SAVE;
+	*reg &= value;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+static inline void reg32_modify_or(volatile uint32_t *reg, uint32_t value)
+{
+	REG_LOCAL_IRQ_SAVE;
+	*reg |= value;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+static inline void reg32_modify_mask(volatile uint32_t *reg, uint32_t mask,
+				     uint32_t value)
+{
+	REG_LOCAL_IRQ_SAVE;
+	*reg = (*reg & mask) | value;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+static inline void reg32_write(volatile uint32_t *reg, uint32_t value)
+{
+	*reg = value;
+}
+
+#endif /* CSP_REG_H */
diff --git a/arch/arm/mach-bcmring/include/csp/stdint.h b/arch/arm/mach-bcmring/include/csp/stdint.h
new file mode 100644
index 00000000000..3a8718bbf70
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/stdint.h
@@ -0,0 +1,30 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CSP_STDINT_H
+#define CSP_STDINT_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#else
+#include <stdint.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /* CSP_STDINT_H */
diff --git a/arch/arm/mach-bcmring/include/csp/string.h b/arch/arm/mach-bcmring/include/csp/string.h
new file mode 100644
index 00000000000..ad9e4005f14
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/string.h
@@ -0,0 +1,34 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+
+#ifndef CSP_STRING_H
+#define CSP_STRING_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#ifdef __KERNEL__
+   #include <linux/string.h>
+#else
+   #include <string.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+
+#endif /* CSP_STRING_H */
+
diff --git a/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h b/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h
new file mode 100644
index 00000000000..f1b68e26fa6
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h
@@ -0,0 +1,872 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    ddrcReg.h
+*
+*  @brief   Register definitions for BCMRING DDR2 Controller and PHY
+*
+*/
+/****************************************************************************/
+
+#ifndef DDRC_REG_H
+#define DDRC_REG_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/reg.h>
+#include <csp/stdint.h>
+
+#include <mach/csp/mm_io.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+/*********************************************************************/
+/* DDR2 Controller (ARM PL341) register definitions */
+/*********************************************************************/
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ARM PL341 DDR2 configuration registers, offset 0x000 */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+	typedef struct {
+		uint32_t memcStatus;
+		uint32_t memcCmd;
+		uint32_t directCmd;
+		uint32_t memoryCfg;
+		uint32_t refreshPrd;
+		uint32_t casLatency;
+		uint32_t writeLatency;
+		uint32_t tMrd;
+		uint32_t tRas;
+		uint32_t tRc;
+		uint32_t tRcd;
+		uint32_t tRfc;
+		uint32_t tRp;
+		uint32_t tRrd;
+		uint32_t tWr;
+		uint32_t tWtr;
+		uint32_t tXp;
+		uint32_t tXsr;
+		uint32_t tEsr;
+		uint32_t memoryCfg2;
+		uint32_t memoryCfg3;
+		uint32_t tFaw;
+	} ddrcReg_CTLR_MEMC_REG_t;
+
+#define ddrcReg_CTLR_MEMC_REG_OFFSET                    0x0000
+#define ddrcReg_CTLR_MEMC_REGP                          ((volatile ddrcReg_CTLR_MEMC_REG_t *)  (MM_IO_BASE_DDRC + ddrcReg_CTLR_MEMC_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMC_STATUS_BANKS_MASK             (0x3 << 12)
+#define ddrcReg_CTLR_MEMC_STATUS_BANKS_4                (0x0 << 12)
+#define ddrcReg_CTLR_MEMC_STATUS_BANKS_8                (0x3 << 12)
+
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_MASK          (0x3 << 10)
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_0             (0x0 << 10)
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_1             (0x1 << 10)
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_2             (0x2 << 10)
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_4             (0x3 << 10)
+
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_MASK             (0x3 << 7)
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_1                (0x0 << 7)
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_2                (0x1 << 7)
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_3                (0x2 << 7)
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_4                (0x3 << 7)
+
+#define ddrcReg_CTLR_MEMC_STATUS_TYPE_MASK              (0x7 << 4)
+#define ddrcReg_CTLR_MEMC_STATUS_TYPE_DDR2              (0x5 << 4)
+
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_MASK             (0x3 << 2)
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_16               (0x0 << 2)
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_32               (0x1 << 2)
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_64               (0x2 << 2)
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_128              (0x3 << 2)
+
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_MASK             (0x3 << 0)
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_CONFIG           (0x0 << 0)
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_READY            (0x1 << 0)
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_PAUSED           (0x2 << 0)
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_LOWPWR           (0x3 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMC_CMD_MASK                      (0x7 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_GO                        (0x0 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_SLEEP                     (0x1 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_WAKEUP                    (0x2 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_PAUSE                     (0x3 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_CONFIGURE                 (0x4 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_ACTIVE_PAUSE              (0x7 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_DIRECT_CMD_CHIP_SHIFT              20
+#define ddrcReg_CTLR_DIRECT_CMD_CHIP_MASK               (0x3 << ddrcReg_CTLR_DIRECT_CMD_CHIP_SHIFT)
+
+#define ddrcReg_CTLR_DIRECT_CMD_TYPE_PRECHARGEALL       (0x0 << 18)
+#define ddrcReg_CTLR_DIRECT_CMD_TYPE_AUTOREFRESH        (0x1 << 18)
+#define ddrcReg_CTLR_DIRECT_CMD_TYPE_MODEREG            (0x2 << 18)
+#define ddrcReg_CTLR_DIRECT_CMD_TYPE_NOP                (0x3 << 18)
+
+#define ddrcReg_CTLR_DIRECT_CMD_BANK_SHIFT              16
+#define ddrcReg_CTLR_DIRECT_CMD_BANK_MASK               (0x3 << ddrcReg_CTLR_DIRECT_CMD_BANK_SHIFT)
+
+#define ddrcReg_CTLR_DIRECT_CMD_ADDR_SHIFT              0
+#define ddrcReg_CTLR_DIRECT_CMD_ADDR_MASK               (0x1ffff << ddrcReg_CTLR_DIRECT_CMD_ADDR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_MASK           (0x3 << 21)
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_1              (0x0 << 21)
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_2              (0x1 << 21)
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_3              (0x2 << 21)
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_4              (0x3 << 21)
+
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_MASK           (0x7 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_3_0            (0x0 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_4_1            (0x1 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_5_2            (0x2 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_6_3            (0x3 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_7_4            (0x4 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_8_5            (0x5 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_9_6            (0x6 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_10_7           (0x7 << 18)
+
+#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_MASK          (0x7 << 15)
+#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_4             (0x2 << 15)
+#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_8             (0x3 << 15)	/* @note Not supported in PL341 */
+
+#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_ENABLE          (0x1 << 13)
+
+#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_SHIFT    7
+#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_MASK     (0x3f << ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_SHIFT)
+
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_MASK       (0x7 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_11         (0x0 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_12         (0x1 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_13         (0x2 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_14         (0x3 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_15         (0x4 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_16         (0x5 << 3)
+
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_MASK       (0x7 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_9          (0x1 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_10         (0x2 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_11         (0x3 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_REFRESH_PRD_SHIFT                  0
+#define ddrcReg_CTLR_REFRESH_PRD_MASK                   (0x7fff << ddrcReg_CTLR_REFRESH_PRD_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_CAS_LATENCY_SHIFT                  1
+#define ddrcReg_CTLR_CAS_LATENCY_MASK                   (0x7 << ddrcReg_CTLR_CAS_LATENCY_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_WRITE_LATENCY_SHIFT                0
+#define ddrcReg_CTLR_WRITE_LATENCY_MASK                 (0x7 << ddrcReg_CTLR_WRITE_LATENCY_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_MRD_SHIFT                        0
+#define ddrcReg_CTLR_T_MRD_MASK                         (0x7f << ddrcReg_CTLR_T_MRD_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RAS_SHIFT                        0
+#define ddrcReg_CTLR_T_RAS_MASK                         (0x1f << ddrcReg_CTLR_T_RAS_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RC_SHIFT                         0
+#define ddrcReg_CTLR_T_RC_MASK                          (0x1f << ddrcReg_CTLR_T_RC_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_SHIFT         8
+#define ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_MASK          (0x7 << ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_SHIFT)
+
+#define ddrcReg_CTLR_T_RCD_SHIFT                        0
+#define ddrcReg_CTLR_T_RCD_MASK                         (0x7 << ddrcReg_CTLR_T_RCD_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_SHIFT         8
+#define ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_MASK          (0x7f << ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_SHIFT)
+
+#define ddrcReg_CTLR_T_RFC_SHIFT                        0
+#define ddrcReg_CTLR_T_RFC_MASK                         (0x7f << ddrcReg_CTLR_T_RFC_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_SHIFT          8
+#define ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_MASK           (0x7 << ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_SHIFT)
+
+#define ddrcReg_CTLR_T_RP_SHIFT                         0
+#define ddrcReg_CTLR_T_RP_MASK                          (0xf << ddrcReg_CTLR_T_RP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RRD_SHIFT                        0
+#define ddrcReg_CTLR_T_RRD_MASK                         (0xf << ddrcReg_CTLR_T_RRD_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_WR_SHIFT                         0
+#define ddrcReg_CTLR_T_WR_MASK                          (0x7 << ddrcReg_CTLR_T_WR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_WTR_SHIFT                        0
+#define ddrcReg_CTLR_T_WTR_MASK                         (0x7 << ddrcReg_CTLR_T_WTR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_XP_SHIFT                         0
+#define ddrcReg_CTLR_T_XP_MASK                          (0xff << ddrcReg_CTLR_T_XP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_XSR_SHIFT                        0
+#define ddrcReg_CTLR_T_XSR_MASK                         (0xff << ddrcReg_CTLR_T_XSR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_ESR_SHIFT                        0
+#define ddrcReg_CTLR_T_ESR_MASK                         (0xff << ddrcReg_CTLR_T_ESR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_MASK             (0x3 << 6)
+#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_16BITS           (0 << 6)
+#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_32BITS           (1 << 6)
+#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_64BITS           (2 << 6)
+
+#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_MASK     (0x3 << 4)
+#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_2        (0 << 4)
+#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_3        (3 << 4)
+
+#define ddrcReg_CTLR_MEMORY_CFG2_CKE_INIT_STATE_LOW     (0 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG2_CKE_INIT_STATE_HIGH    (1 << 3)
+
+#define ddrcReg_CTLR_MEMORY_CFG2_DQM_INIT_STATE_LOW     (0 << 2)
+#define ddrcReg_CTLR_MEMORY_CFG2_DQM_INIT_STATE_HIGH    (1 << 2)
+
+#define ddrcReg_CTLR_MEMORY_CFG2_CLK_MASK               (0x3 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG2_CLK_ASYNC              (0 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG2_CLK_SYNC_A_LE_M        (1 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG2_CLK_SYNC_A_GT_M        (3 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_SHIFT       0
+#define ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_MASK        (0x7 << ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_SHIFT         8
+#define ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_MASK          (0x1f << ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_SHIFT)
+
+#define ddrcReg_CTLR_T_FAW_PERIOD_SHIFT                 0
+#define ddrcReg_CTLR_T_FAW_PERIOD_MASK                  (0x1f << ddrcReg_CTLR_T_FAW_PERIOD_SHIFT)
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ARM PL341 AXI ID QOS configuration registers, offset 0x100 */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+#define ddrcReg_CTLR_QOS_CNT                            16
+#define ddrcReg_CTLR_QOS_MAX                            (ddrcReg_CTLR_QOS_CNT - 1)
+
+	typedef struct {
+		uint32_t cfg[ddrcReg_CTLR_QOS_CNT];
+	} ddrcReg_CTLR_QOS_REG_t;
+
+#define ddrcReg_CTLR_QOS_REG_OFFSET                     0x100
+#define ddrcReg_CTLR_QOS_REGP                           ((volatile ddrcReg_CTLR_QOS_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_QOS_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_QOS_CFG_MAX_SHIFT                  2
+#define ddrcReg_CTLR_QOS_CFG_MAX_MASK                   (0xff << ddrcReg_CTLR_QOS_CFG_MAX_SHIFT)
+
+#define ddrcReg_CTLR_QOS_CFG_MIN_SHIFT                  1
+#define ddrcReg_CTLR_QOS_CFG_MIN_MASK                   (1 << ddrcReg_CTLR_QOS_CFG_MIN_SHIFT)
+
+#define ddrcReg_CTLR_QOS_CFG_ENABLE                     (1 << 0)
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ARM PL341 Memory chip configuration registers, offset 0x200 */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+#define ddrcReg_CTLR_CHIP_CNT                           4
+#define ddrcReg_CTLR_CHIP_MAX                           (ddrcReg_CTLR_CHIP_CNT - 1)
+
+	typedef struct {
+		uint32_t cfg[ddrcReg_CTLR_CHIP_CNT];
+	} ddrcReg_CTLR_CHIP_REG_t;
+
+#define ddrcReg_CTLR_CHIP_REG_OFFSET                    0x200
+#define ddrcReg_CTLR_CHIP_REGP                          ((volatile ddrcReg_CTLR_CHIP_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_CHIP_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_MASK              (1 << 16)
+#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_ROW_BANK_COL      (0 << 16)
+#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_BANK_ROW_COL      (1 << 16)
+
+#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_SHIFT      8
+#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_MASK       (0xff << ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_SHIFT)
+
+#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_SHIFT       0
+#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_MASK        (0xff << ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_SHIFT)
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ARM PL341 User configuration registers, offset 0x300 */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+#define ddrcReg_CTLR_USER_OUTPUT_CNT                    2
+
+	typedef struct {
+		uint32_t input;
+		uint32_t output[ddrcReg_CTLR_USER_OUTPUT_CNT];
+		uint32_t feature;
+	} ddrcReg_CTLR_USER_REG_t;
+
+#define ddrcReg_CTLR_USER_REG_OFFSET                    0x300
+#define ddrcReg_CTLR_USER_REGP                          ((volatile ddrcReg_CTLR_USER_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_USER_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_USER_INPUT_STATUS_SHIFT            0
+#define ddrcReg_CTLR_USER_INPUT_STATUS_MASK             (0xff << ddrcReg_CTLR_USER_INPUT_STATUS_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_USER_OUTPUT_CFG_SHIFT              0
+#define ddrcReg_CTLR_USER_OUTPUT_CFG_MASK               (0xff << ddrcReg_CTLR_USER_OUTPUT_CFG_SHIFT)
+
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT      1
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_MASK       (1 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_BP134      (0 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_PL301      (1 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_REGISTERED ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_PL301
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_FEATURE_WRITE_BLOCK_DISABLE        (1 << 2)
+#define ddrcReg_CTLR_FEATURE_EARLY_BURST_RSP_DISABLE    (1 << 0)
+
+/*********************************************************************/
+/* Broadcom DDR23 PHY register definitions */
+/*********************************************************************/
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* Broadcom DDR23 PHY Address and Control register definitions */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+	typedef struct {
+		uint32_t revision;
+		uint32_t pmCtl;
+		 REG32_RSVD(0x0008, 0x0010);
+		uint32_t pllStatus;
+		uint32_t pllCfg;
+		uint32_t pllPreDiv;
+		uint32_t pllDiv;
+		uint32_t pllCtl1;
+		uint32_t pllCtl2;
+		uint32_t ssCtl;
+		uint32_t ssCfg;
+		uint32_t vdlStatic;
+		uint32_t vdlDynamic;
+		uint32_t padIdle;
+		uint32_t pvtComp;
+		uint32_t padDrive;
+		uint32_t clkRgltrCtl;
+	} ddrcReg_PHY_ADDR_CTL_REG_t;
+
+#define ddrcReg_PHY_ADDR_CTL_REG_OFFSET                 0x0400
+#define ddrcReg_PHY_ADDR_CTL_REGP                       ((volatile ddrcReg_PHY_ADDR_CTL_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_ADDR_CTL_REG_OFFSET))
+
+/* @todo These SS definitions are duplicates of ones below */
+
+#define ddrcReg_PHY_ADDR_SS_CTRL_ENABLE                 0x00000001
+#define ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_MASK     0xFFFF0000
+#define ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT    16
+#define ddrcReg_PHY_ADDR_SS_CFG_MIN_CYCLE_PER_TICK      10	/* Higher the value, lower the SS modulation frequency */
+#define ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_MASK     0x0000FFFF
+#define ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT    0
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_SHIFT       8
+#define ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_MASK        (0xff << ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_SHIFT       0
+#define ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_MASK        (0xff << ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_CLK_PM_CTL_DDR_CLK_DISABLE (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_STATUS_LOCKED          (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_DIV2_CLK_RESET     (1 << 31)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_SHIFT     17
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_MASK      (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_ENABLE        (1 << 16)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_SHIFT     12
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_MASK      (0xf << ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_VCO_RNG            (1 << 7)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_CH1_PWRDWN         (1 << 6)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BYPASS_ENABLE      (1 << 5)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_CLKOUT_ENABLE      (1 << 4)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_D_RESET            (1 << 3)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_A_RESET            (1 << 2)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_PWRDWN             (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_DITHER_MFB     (1 << 26)
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_PWRDWN         (1 << 25)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_SHIFT     20
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_MASK      (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_SHIFT      8
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_MASK       (0x1ff << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_SHIFT       4
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_MASK        (0xf << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_SHIFT       0
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_MASK        (0xf << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_SHIFT           24
+#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_MASK            (0xff << ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_SHIFT         0
+#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_MASK          (0xffffff << ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_SHIFT       30
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_MASK        (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_SHIFT     27
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_MASK      (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_SHIFT     24
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_MASK      (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_SHIFT      22
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_MASK       (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LF_ORDER          (0x1 << 21)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_SHIFT          19
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_MASK           (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_SHIFT          17
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_MASK           (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_SHIFT          15
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_MASK           (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_SHIFT          13
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_MASK           (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_SHIFT          10
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_MASK           (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_SHIFT        5
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_MASK         (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_SHIFT     0
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_MASK      (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_SHIFT)
+
+/* ----------------------------------------------------- */
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_SHIFT    4
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_MASK     (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_SHIFT    2
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_MASK     (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_LOWCUR_ENABLE     (0x1 << 1)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_BIASIN_ENABLE     (0x1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_EN_ENABLE           (0x1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_SHIFT  16
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_MASK   (0xffff << ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_SHIFT      0
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_MASK       (0xffff << ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FORCE           (1 << 20)
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_ENABLE          (1 << 16)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_SHIFT      12
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_MASK       (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_SHIFT      8
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_MASK       (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_SHIFT      0
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_MASK       (0x3f << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_ENABLE         (1 << 16)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_SHIFT     12
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_MASK      (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_SHIFT     8
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_MASK      (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_SHIFT     0
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_MASK      (0x3f << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_ENABLE            (1u << 31)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_RXENB_DISABLE     (1 << 8)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_IDDQ_DISABLE  (1 << 6)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_REB_DISABLE   (1 << 5)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_OEB_DISABLE   (1 << 4)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_IDDQ_DISABLE  (1 << 2)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_REB_DISABLE   (1 << 1)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_OEB_DISABLE   (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_DONE           (1 << 30)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_DONE           (1 << 29)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_DONE       (1 << 28)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_AUTO_ENABLE    (1 << 27)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_ENABLE     (1 << 26)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_OVR_ENABLE   (1 << 25)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_OVR_ENABLE     (1 << 24)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_SHIFT          20
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_MASK           (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_SHIFT          16
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_MASK           (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_SHIFT     12
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_MASK      (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_SHIFT     8
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_MASK      (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_SHIFT       4
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_MASK        (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_SHIFT       0
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_MASK        (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_RT60B            (1 << 4)
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SEL_SSTL18       (1 << 3)
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SELTXDRV_CI      (1 << 2)
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SELRXDRV         (1 << 1)
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SLEW             (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_CLK_RGLTR_CTL_PWR_HALF     (1 << 1)
+#define ddrcReg_PHY_ADDR_CTL_CLK_RGLTR_CTL_PWR_OFF      (1 << 0)
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* Broadcom DDR23 PHY Byte Lane register definitions */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_CNT                       2
+#define ddrcReg_PHY_BYTE_LANE_MAX                       (ddrcReg_CTLR_BYTE_LANE_CNT - 1)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_CNT               8
+
+	typedef struct {
+		uint32_t revision;
+		uint32_t vdlCalibrate;
+		uint32_t vdlStatus;
+		 REG32_RSVD(0x000c, 0x0010);
+		uint32_t vdlOverride[ddrcReg_PHY_BYTE_LANE_VDL_OVR_CNT];
+		uint32_t readCtl;
+		uint32_t readStatus;
+		uint32_t readClear;
+		uint32_t padIdleCtl;
+		uint32_t padDriveCtl;
+		uint32_t padClkCtl;
+		uint32_t writeCtl;
+		uint32_t clkRegCtl;
+	} ddrcReg_PHY_BYTE_LANE_REG_t;
+
+/* There are 2 instances of the byte Lane registers, one for each byte lane. */
+#define ddrcReg_PHY_BYTE_LANE_1_REG_OFFSET              0x0500
+#define ddrcReg_PHY_BYTE_LANE_2_REG_OFFSET              0x0600
+
+#define ddrcReg_PHY_BYTE_LANE_1_REGP                    ((volatile ddrcReg_PHY_BYTE_LANE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_BYTE_LANE_1_REG_OFFSET))
+#define ddrcReg_PHY_BYTE_LANE_2_REGP                    ((volatile ddrcReg_PHY_BYTE_LANE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_BYTE_LANE_2_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_SHIFT      8
+#define ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_MASK       (0xff << ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_SHIFT      0
+#define ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_MASK       (0xff << ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_CLK_2CYCLE      (1 << 4)
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_CLK_1CYCLE      (0 << 4)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_TEST            (1 << 3)
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_ALWAYS          (1 << 2)
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_ONCE            (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_FAST            (1 << 0)
+
+/* ----------------------------------------------------- */
+
+/* The byte lane VDL status calibTotal[9:0] is comprised of [9:4] step value, [3:2] fine fall */
+/* and [1:0] fine rise. Note that calibTotal[9:0] is located at bit 4 in the VDL status */
+/* register. The fine rise and fall are no longer used, so add some definitions for just */
+/* the step setting to simplify things. */
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_SHIFT     8
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_MASK      (0x3f << ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_SHIFT    4
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_MASK     (0x3ff << ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_LOCK           (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_IDLE           (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_ENABLE            (1 << 16)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_SHIFT        12
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_MASK         (0x3 << ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_SHIFT        8
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_MASK         (0x3 << ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_SHIFT        0
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_MASK         (0x3f << ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_DQS_P     0
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_DQS_N     1
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_EN        2
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_WRITE_DQ_DQM   3
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_DQS_P    4
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_DQS_N    5
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_EN       6
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_WRITE_DQ_DQM  7
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_SHIFT      8
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_MASK       (0x3 << ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DQ_ODT_ENABLE    (1 << 3)
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DQ_ODT_ADJUST    (1 << 2)
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_RD_ODT_ENABLE    (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_RD_ODT_ADJUST    (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_SHIFT   0
+#define ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_MASK    (0xf << ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_READ_CLEAR_STATUS         (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_ENABLE                   (1u << 31)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_RXENB_DISABLE         (1 << 19)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_IDDQ_DISABLE          (1 << 18)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_REB_DISABLE           (1 << 17)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_OEB_DISABLE           (1 << 16)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_RXENB_DISABLE         (1 << 15)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_IDDQ_DISABLE          (1 << 14)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_REB_DISABLE           (1 << 13)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_OEB_DISABLE           (1 << 12)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_RXENB_DISABLE   (1 << 11)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_IDDQ_DISABLE    (1 << 10)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_REB_DISABLE     (1 << 9)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_OEB_DISABLE     (1 << 8)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_RXENB_DISABLE        (1 << 7)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_IDDQ_DISABLE         (1 << 6)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_REB_DISABLE          (1 << 5)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_OEB_DISABLE          (1 << 4)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_RXENB_DISABLE        (1 << 3)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_IDDQ_DISABLE         (1 << 2)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_REB_DISABLE          (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_OEB_DISABLE          (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_RT60B_DDR_READ_ENB      (1 << 5)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_RT60B                   (1 << 4)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SEL_SSTL18              (1 << 3)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SELTXDRV_CI             (1 << 2)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SELRXDRV                (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SLEW                    (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_PAD_CLK_CTL_DISABLE                   (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_WRITE_CTL_PREAMBLE_DDR3               (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_CLK_REG_CTL_PWR_HALF                  (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_CLK_REG_CTL_PWR_OFF                   (1 << 0)
+
+/*********************************************************************/
+/* ARM PL341 DDRC to Broadcom DDR23 PHY glue register definitions */
+/*********************************************************************/
+
+	typedef struct {
+		uint32_t cfg;
+		uint32_t actMonCnt;
+		uint32_t ctl;
+		uint32_t lbistCtl;
+		uint32_t lbistSeed;
+		uint32_t lbistStatus;
+		uint32_t tieOff;
+		uint32_t actMonClear;
+		uint32_t status;
+		uint32_t user;
+	} ddrcReg_CTLR_PHY_GLUE_REG_t;
+
+#define ddrcReg_CTLR_PHY_GLUE_OFFSET                            0x0700
+#define ddrcReg_CTLR_PHY_GLUE_REGP                              ((volatile ddrcReg_CTLR_PHY_GLUE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_PHY_GLUE_OFFSET))
+
+/* ----------------------------------------------------- */
+
+/* DDR2 / AXI block phase alignment interrupt control */
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT                     18
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_MASK                      (0x3 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_OFF                       (0 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_TIGHT                  (1 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_MEDIUM                 (2 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_LOOSE                  (3 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT              17
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_MASK               (1 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_DIFFERENTIAL       (0 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_CMOS               (1 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT            16
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_MASK             (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_DEEP             (0 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHALLOW          (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_HW_FIXED_ALIGNMENT_DISABLED   ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHALLOW
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT             15
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_MASK              (1 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_BP134             (0 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_PL301             (1 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_REGISTERED        ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_PL301
+
+/* Software control of PHY VDL updates from control register settings. Bit 13 enables the use of Bit 14. */
+/* If software control is not enabled, then updates occur when a refresh command is issued by the hardware */
+/* controller. If 2 chips selects are being used, then software control must be enabled. */
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_VDL_UPDATE_SW_CTL_LOAD    (1 << 14)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_VDL_UPDATE_SW_CTL_ENABLE  (1 << 13)
+
+/* Use these to bypass a pipeline stage. By default the ADDR is off but the BYTE LANE in / out are on. */
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_ADDR_CTL_IN_BYPASS_PIPELINE_STAGE (1 << 12)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_BYTE_LANE_IN_BYPASS_PIPELINE_STAGE (1 << 11)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_BYTE_LANE_OUT_BYPASS_PIPELINE_STAGE (1 << 10)
+
+/* Chip select count */
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT                  9
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_MASK                   (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_1                      (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_2                      (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT                     8
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_ASYNC                     (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SYNC                      (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT                7
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_LOW                  (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_HIGH                 (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT                6
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_LOW                  (0 << ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_HIGH                 (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_SHIFT             0
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_MASK              (0x7 << ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_SHIFT)
+
+/* ----------------------------------------------------- */
+#define ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_SHIFT                0
+#define ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_MASK                 (0x7f << ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_SHIFT)
+
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#ifdef __cplusplus
+}				/* end extern "C" */
+#endif
+#endif				/* DDRC_REG_H */
-- 
cgit v1.2.3


From f1947c7a6717e437d9fe0e27a76bacf77f570d2d Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:04:54 +0100
Subject: ARM: 5654/1: bcmring: add csp chipc hardware register file

add csp chipc hardware register file

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 .../mach-bcmring/include/mach/csp/chipcHw_reg.h    | 530 +++++++++++++++++++++
 1 file changed, 530 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h

(limited to 'arch/arm')

diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h
new file mode 100644
index 00000000000..b162448f613
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h
@@ -0,0 +1,530 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    chipcHw_reg.h
+*
+*  @brief   Definitions for low level chip control registers
+*
+*/
+/****************************************************************************/
+#ifndef CHIPCHW_REG_H
+#define CHIPCHW_REG_H
+
+#include <mach/csp/mm_io.h>
+#include <csp/reg.h>
+#include <mach/csp/ddrcReg.h>
+
+#define chipcHw_BASE_ADDRESS    MM_IO_BASE_CHIPC
+
+typedef struct {
+	uint32_t ChipId;	/* Chip ID */
+	uint32_t DDRClock;	/* PLL1 Channel 1 for DDR clock */
+	uint32_t ARMClock;	/* PLL1 Channel 2 for ARM clock */
+	uint32_t ESWClock;	/* PLL1 Channel 3 for ESW system clock */
+	uint32_t VPMClock;	/* PLL1 Channel 4 for VPM clock */
+	uint32_t ESW125Clock;	/* PLL1 Channel 5 for ESW 125MHz clock */
+	uint32_t UARTClock;	/* PLL1 Channel 6 for UART clock */
+	uint32_t SDIO0Clock;	/* PLL1 Channel 7 for SDIO 0 clock */
+	uint32_t SDIO1Clock;	/* PLL1 Channel 8 for SDIO 1 clock */
+	uint32_t SPIClock;	/* PLL1 Channel 9 for SPI master Clock  */
+	uint32_t ETMClock;	/* PLL1 Channel 10 for ARM ETM Clock  */
+
+	uint32_t ACLKClock;	/* ACLK Clock (Divider) */
+	uint32_t OTPClock;	/* OTP Clock  (Divider) */
+	uint32_t I2CClock;	/* I2C Clock (CK_13m) (Divider) */
+	uint32_t I2S0Clock;	/* I2S0 Clock (Divider) */
+	uint32_t RTBUSClock;	/* RTBUS (DDR PHY Config.) Clock (Divider) */
+	uint32_t pad1;
+	uint32_t APM100Clock;	/* APM 100MHz CLK Clock (Divider) */
+	uint32_t TSCClock;	/* TSC Clock (Divider) */
+	uint32_t LEDClock;	/* LED Clock (Divider) */
+
+	uint32_t USBClock;	/* PLL2 Channel 1 for USB clock */
+	uint32_t LCDClock;	/* PLL2 Channel 2 for LCD clock */
+	uint32_t APMClock;	/* PLL2 Channel 3 for APM 200 MHz clock */
+
+	uint32_t BusIntfClock;	/* Bus interface clock */
+
+	uint32_t PLLStatus;	/* PLL status register (PLL1) */
+	uint32_t PLLConfig;	/* PLL configuration register  (PLL1) */
+	uint32_t PLLPreDivider;	/* PLL pre-divider control register (PLL1) */
+	uint32_t PLLDivider;	/* PLL divider control register (PLL1) */
+	uint32_t PLLControl1;	/* PLL analog control register #1 (PLL1) */
+	uint32_t PLLControl2;	/* PLL analog control register #2 (PLL1) */
+
+	uint32_t I2S1Clock;	/* I2S1 Clock  */
+	uint32_t AudioEnable;	/* Enable/ disable audio channel */
+	uint32_t SoftReset1;	/* Reset blocks */
+	uint32_t SoftReset2;	/* Reset blocks */
+	uint32_t Spare1;	/* Phase align interrupts */
+	uint32_t Sticky;	/* Sticky bits */
+	uint32_t MiscCtrl;	/* Misc. control */
+	uint32_t pad3[3];
+
+	uint32_t PLLStatus2;	/* PLL status register (PLL2) */
+	uint32_t PLLConfig2;	/* PLL configuration register  (PLL2) */
+	uint32_t PLLPreDivider2;	/* PLL pre-divider control register (PLL2) */
+	uint32_t PLLDivider2;	/* PLL divider control register (PLL2) */
+	uint32_t PLLControl12;	/* PLL analog control register #1 (PLL2) */
+	uint32_t PLLControl22;	/* PLL analog control register #2 (PLL2) */
+
+	uint32_t DDRPhaseCtrl1;	/* DDR Clock Phase Alignment control1 */
+	uint32_t VPMPhaseCtrl1;	/* VPM Clock Phase Alignment control1 */
+	uint32_t PhaseAlignStatus;	/* DDR/VPM Clock Phase Alignment Status */
+	uint32_t PhaseCtrlStatus;	/* DDR/VPM Clock HW DDR/VPM ph_ctrl and load_ch Status */
+	uint32_t DDRPhaseCtrl2;	/* DDR Clock Phase Alignment control2 */
+	uint32_t VPMPhaseCtrl2;	/* VPM Clock Phase Alignment control2 */
+	uint32_t pad4[9];
+
+	uint32_t SoftOTP1;	/* Software OTP control */
+	uint32_t SoftOTP2;	/* Software OTP control */
+	uint32_t SoftStraps;	/* Software strap */
+	uint32_t PinStraps;	/* Pin Straps */
+	uint32_t DiffOscCtrl;	/* Diff oscillator control */
+	uint32_t DiagsCtrl;	/* Diagnostic control */
+	uint32_t DiagsOutputCtrl;	/* Diagnostic output enable */
+	uint32_t DiagsReadBackCtrl;	/* Diagnostic read back control */
+
+	uint32_t LcdPifMode;	/* LCD/PIF Pin Sharing MUX Mode */
+
+	uint32_t GpioMux_0_7;	/* Pin Sharing MUX0 Control */
+	uint32_t GpioMux_8_15;	/* Pin Sharing MUX1 Control */
+	uint32_t GpioMux_16_23;	/* Pin Sharing MUX2 Control */
+	uint32_t GpioMux_24_31;	/* Pin Sharing MUX3 Control */
+	uint32_t GpioMux_32_39;	/* Pin Sharing MUX4 Control */
+	uint32_t GpioMux_40_47;	/* Pin Sharing MUX5 Control */
+	uint32_t GpioMux_48_55;	/* Pin Sharing MUX6 Control */
+	uint32_t GpioMux_56_63;	/* Pin Sharing MUX7 Control */
+
+	uint32_t GpioSR_0_7;	/* Slew rate for GPIO 0 - 7 */
+	uint32_t GpioSR_8_15;	/* Slew rate for GPIO 8 - 15 */
+	uint32_t GpioSR_16_23;	/* Slew rate for GPIO 16 - 23 */
+	uint32_t GpioSR_24_31;	/* Slew rate for GPIO 24 - 31 */
+	uint32_t GpioSR_32_39;	/* Slew rate for GPIO 32 - 39 */
+	uint32_t GpioSR_40_47;	/* Slew rate for GPIO 40 - 47 */
+	uint32_t GpioSR_48_55;	/* Slew rate for GPIO 48 - 55 */
+	uint32_t GpioSR_56_63;	/* Slew rate for GPIO 56 - 63 */
+	uint32_t MiscSR_0_7;	/* Slew rate for MISC 0 - 7 */
+	uint32_t MiscSR_8_15;	/* Slew rate for MISC 8 - 15 */
+
+	uint32_t GpioPull_0_15;	/* Pull up registers for GPIO 0 - 15 */
+	uint32_t GpioPull_16_31;	/* Pull up registers for GPIO 16 - 31 */
+	uint32_t GpioPull_32_47;	/* Pull up registers for GPIO 32 - 47 */
+	uint32_t GpioPull_48_63;	/* Pull up registers for GPIO 48 - 63 */
+	uint32_t MiscPull_0_15;	/* Pull up registers for MISC 0 - 15 */
+
+	uint32_t GpioInput_0_31;	/* Input type for GPIO 0 - 31 */
+	uint32_t GpioInput_32_63;	/* Input type for GPIO 32 - 63 */
+	uint32_t MiscInput_0_15;	/* Input type for MISC 0 - 16 */
+} chipcHw_REG_t;
+
+#define pChipcHw  ((volatile chipcHw_REG_t *) chipcHw_BASE_ADDRESS)
+#define pChipcPhysical  ((volatile chipcHw_REG_t *) MM_ADDR_IO_CHIPC)
+
+#define chipcHw_REG_CHIPID_BASE_MASK                    0xFFFFF000
+#define chipcHw_REG_CHIPID_BASE_SHIFT                   12
+#define chipcHw_REG_CHIPID_REV_MASK                     0x00000FFF
+#define chipcHw_REG_REV_A0                              0xA00
+#define chipcHw_REG_REV_B0                              0x0B0
+
+#define chipcHw_REG_PLL_STATUS_CONTROL_ENABLE           0x80000000	/* Allow controlling PLL registers */
+#define chipcHw_REG_PLL_STATUS_LOCKED                   0x00000001	/* PLL is settled */
+#define chipcHw_REG_PLL_CONFIG_D_RESET                  0x00000008	/* Digital reset */
+#define chipcHw_REG_PLL_CONFIG_A_RESET                  0x00000004	/* Analog reset */
+#define chipcHw_REG_PLL_CONFIG_BYPASS_ENABLE            0x00000020	/* Bypass enable */
+#define chipcHw_REG_PLL_CONFIG_OUTPUT_ENABLE            0x00000010	/* Output enable */
+#define chipcHw_REG_PLL_CONFIG_POWER_DOWN               0x00000001	/* Power down */
+#define chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ           1600000000	/* 1.6GHz VCO split frequency */
+#define chipcHw_REG_PLL_CONFIG_VCO_800_1600             0x00000000	/* VCO range 800-1600 MHz */
+#define chipcHw_REG_PLL_CONFIG_VCO_1601_3200            0x00000080	/* VCO range 1601-3200 MHz */
+#define chipcHw_REG_PLL_CONFIG_TEST_ENABLE              0x00010000	/* PLL test output enable */
+#define chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK         0x003E0000	/* Mask to set test values */
+#define chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT        17
+
+#define chipcHw_REG_PLL_CLOCK_PHASE_COMP                0x00800000	/* Phase comparator output */
+#define chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK         0x00300000	/* Clock to bus ratio mask */
+#define chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT        20	/* Number of bits to be shifted */
+#define chipcHw_REG_PLL_CLOCK_POWER_DOWN                0x00080000	/* PLL channel power down */
+#define chipcHw_REG_PLL_CLOCK_SOURCE_GPIO               0x00040000	/* Use GPIO as source */
+#define chipcHw_REG_PLL_CLOCK_BYPASS_SELECT             0x00020000	/* Select bypass clock */
+#define chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE             0x00010000	/* Clock gated ON */
+#define chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE       0x00008000	/* Clock phase update enable */
+#define chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT       8	/* Number of bits to be shifted */
+#define chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK        0x00003F00	/* Phase control mask */
+#define chipcHw_REG_PLL_CLOCK_MDIV_MASK                 0x000000FF	/* Clock post divider mask
+
+									   00000000 = divide-by-256
+									   00000001 = divide-by-1
+									   00000010 = divide-by-2
+									   00000011 = divide-by-3
+									   00000100 = divide-by-4
+									   00000101 = divide-by-5
+									   00000110 = divide-by-6
+									   .
+									   .
+									   11111011 = divide-by-251
+									   11111100 = divide-by-252
+									   11111101 = divide-by-253
+									   11111110 = divide-by-254
+									 */
+
+#define chipcHw_REG_DIV_CLOCK_SOURCE_OTHER              0x00040000	/* NON-PLL clock source select */
+#define chipcHw_REG_DIV_CLOCK_BYPASS_SELECT             0x00020000	/* NON-PLL clock bypass enable */
+#define chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE             0x00010000	/* NON-PLL clock output enable */
+#define chipcHw_REG_DIV_CLOCK_DIV_MASK                  0x000000FF	/* NON-PLL clock post-divide mask */
+#define chipcHw_REG_DIV_CLOCK_DIV_256                   0x00000000	/* NON-PLL clock post-divide by 256 */
+
+#define chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT             0
+#define chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT             4
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT           8
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK            0x0001FF00
+#define chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN           0x02000000
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK       0x00700000	/* Divider mask */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER    0x00000000	/* Integer-N Mode */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_UNIT  0x00100000	/* MASH Sigma-Delta Modulator Unit Mode */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MFB_UNIT   0x00200000	/* MFB Sigma-Delta Modulator Unit Mode */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_1_8   0x00300000	/* MASH Sigma-Delta Modulator 1/8 Mode */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MFB_1_8    0x00400000	/* MFB Sigma-Delta Modulator 1/8 Mode */
+
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vco)          ((vco) / chipcHw_XTAL_FREQ_Hz)
+#define chipcHw_REG_PLL_PREDIVIDER_P1                   1
+#define chipcHw_REG_PLL_PREDIVIDER_P2                   1
+
+#define chipcHw_REG_PLL_DIVIDER_M1DIV                   0x03000000
+#define chipcHw_REG_PLL_DIVIDER_FRAC                    0x00FFFFFF	/* Fractional divider */
+
+#define chipcHw_REG_PLL_DIVIDER_NDIV_f_SS               (0x00FFFFFF)	/* To attain spread with max frequency */
+
+#define chipcHw_REG_PLL_DIVIDER_NDIV_f                  0	/* ndiv_frac = chipcHw_REG_PLL_DIVIDER_NDIV_f /
+								   chipcHw_REG_PLL_DIVIDER_FRAC
+								   = 0, when SS is disable
+								 */
+
+#define chipcHw_REG_PLL_DIVIDER_MDIV(vco, Hz)           ((chipcHw_divide((vco), (Hz)) > 255) ? 0 : chipcHw_divide((vco), (Hz)))
+
+#define chipcHw_REG_ACLKClock_CLK_DIV_MASK              0x3
+
+/* System booting strap options */
+#define chipcHw_STRAPS_SOFT_OVERRIDE                    0x00000001	/* Software Strap Override */
+
+#define chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_8         0x00000000	/* 8 bit NAND FLASH Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_NOR_FLASH_16         0x00000002	/* 16 bit NOR FLASH Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_SERIAL_FLASH         0x00000004	/* Serial FLASH Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_16        0x00000006	/* 16 bit NAND FLASH Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_UART                 0x00000008	/* UART Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_MASK                 0x0000000E	/* Mask */
+
+/* System boot option */
+#define chipcHw_STRAPS_BOOT_OPTION_BROM                 0x00000000	/* Boot from Boot ROM */
+#define chipcHw_STRAPS_BOOT_OPTION_ARAM                 0x00000020	/* Boot from ARAM */
+#define chipcHw_STRAPS_BOOT_OPTION_NOR                  0x00000030	/* Boot from NOR flash */
+
+/* NAND Flash page size strap options */
+#define chipcHw_STRAPS_NAND_PAGESIZE_512                0x00000000	/* NAND FLASH page size of 512 bytes */
+#define chipcHw_STRAPS_NAND_PAGESIZE_2048               0x00000040	/* NAND FLASH page size of 2048 bytes */
+#define chipcHw_STRAPS_NAND_PAGESIZE_4096               0x00000080	/* NAND FLASH page size of 4096 bytes */
+#define chipcHw_STRAPS_NAND_PAGESIZE_EXT                0x000000C0	/* NAND FLASH page of extened size */
+#define chipcHw_STRAPS_NAND_PAGESIZE_MASK               0x000000C0	/* Mask */
+
+#define chipcHw_STRAPS_NAND_EXTRA_CYCLE                 0x00000400	/* NAND FLASH address cycle configuration */
+#define chipcHw_STRAPS_REBOOT_TO_UART                   0x00000800	/* Reboot to UART on error */
+
+/* Secure boot mode strap options */
+#define chipcHw_STRAPS_BOOT_MODE_NORMAL                 0x00000000	/* Normal Boot */
+#define chipcHw_STRAPS_BOOT_MODE_DBG_SW                 0x00000100	/* Software debugging Boot */
+#define chipcHw_STRAPS_BOOT_MODE_DBG_BOOT               0x00000200	/* Boot rom debugging Boot */
+#define chipcHw_STRAPS_BOOT_MODE_NORMAL_QUIET           0x00000300	/* Normal Boot (Quiet BootRom) */
+#define chipcHw_STRAPS_BOOT_MODE_MASK                   0x00000300	/* Mask */
+
+/* Slave Mode straps */
+#define chipcHw_STRAPS_I2CS                             0x02000000	/* I2C Slave  */
+#define chipcHw_STRAPS_SPIS                             0x01000000	/* SPI Slave  */
+
+/* Strap pin options */
+#define chipcHw_REG_SW_STRAPS                           ((pChipcHw->PinStraps & 0x0000FC00) >> 10)
+
+/* PIF/LCD pin sharing defines */
+#define chipcHw_REG_LCD_PIN_ENABLE                      0x00000001	/* LCD Controller is used and the pins have LCD functions */
+#define chipcHw_REG_PIF_PIN_ENABLE                      0x00000002	/* LCD pins are used to perform PIF functions  */
+
+#define chipcHw_GPIO_COUNT                              61	/* Number of GPIO pin accessible thorugh CHIPC */
+
+/* NOTE: Any changes to these constants will require a corresponding change to chipcHw_str.c */
+#define chipcHw_REG_GPIO_MUX_KEYPAD                     0x00000001	/* GPIO mux for Keypad */
+#define chipcHw_REG_GPIO_MUX_I2CH                       0x00000002	/* GPIO mux for I2CH */
+#define chipcHw_REG_GPIO_MUX_SPI                        0x00000003	/* GPIO mux for SPI */
+#define chipcHw_REG_GPIO_MUX_UART                       0x00000004	/* GPIO mux for UART */
+#define chipcHw_REG_GPIO_MUX_LEDMTXP                    0x00000005	/* GPIO mux for LEDMTXP */
+#define chipcHw_REG_GPIO_MUX_LEDMTXS                    0x00000006	/* GPIO mux for LEDMTXS */
+#define chipcHw_REG_GPIO_MUX_SDIO0                      0x00000007	/* GPIO mux for SDIO0 */
+#define chipcHw_REG_GPIO_MUX_SDIO1                      0x00000008	/* GPIO mux for SDIO1 */
+#define chipcHw_REG_GPIO_MUX_PCM                        0x00000009	/* GPIO mux for PCM */
+#define chipcHw_REG_GPIO_MUX_I2S                        0x0000000A	/* GPIO mux for I2S */
+#define chipcHw_REG_GPIO_MUX_ETM                        0x0000000B	/* GPIO mux for ETM */
+#define chipcHw_REG_GPIO_MUX_DEBUG                      0x0000000C	/* GPIO mux for DEBUG */
+#define chipcHw_REG_GPIO_MUX_MISC                       0x0000000D	/* GPIO mux for MISC */
+#define chipcHw_REG_GPIO_MUX_GPIO                       0x00000000	/* GPIO mux for GPIO */
+#define chipcHw_REG_GPIO_MUX(pin)                       (&pChipcHw->GpioMux_0_7 + ((pin) >> 3))
+#define chipcHw_REG_GPIO_MUX_POSITION(pin)              (((pin) & 0x00000007) << 2)
+#define chipcHw_REG_GPIO_MUX_MASK                       0x0000000F	/* Mask */
+
+#define chipcHw_REG_SLEW_RATE_HIGH                      0x00000000	/* High speed slew rate */
+#define chipcHw_REG_SLEW_RATE_NORMAL                    0x00000008	/* Normal slew rate */
+							/* Pins beyond 42 are defined by skipping 8 bits within the register */
+#define chipcHw_REG_SLEW_RATE(pin)                      (((pin) > 42) ? (&pChipcHw->GpioSR_0_7 + (((pin) + 2) >> 3)) : (&pChipcHw->GpioSR_0_7 + ((pin) >> 3)))
+#define chipcHw_REG_SLEW_RATE_POSITION(pin)             (((pin) > 42) ? ((((pin) + 2) & 0x00000007) << 2) : (((pin) & 0x00000007) << 2))
+#define chipcHw_REG_SLEW_RATE_MASK                      0x00000008	/* Mask */
+
+#define chipcHw_REG_CURRENT_STRENGTH_2mA                0x00000001	/* Current driving strength 2 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_4mA                0x00000002	/* Current driving strength 4 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_6mA                0x00000004	/* Current driving strength 6 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_8mA                0x00000005	/* Current driving strength 8 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_10mA               0x00000006	/* Current driving strength 10 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_12mA               0x00000007	/* Current driving strength 12 milli ampere */
+#define chipcHw_REG_CURRENT_MASK                        0x00000007	/* Mask */
+							/* Pins beyond 42 are defined by skipping 8 bits */
+#define chipcHw_REG_CURRENT(pin)                        (((pin) > 42) ? (&pChipcHw->GpioSR_0_7 + (((pin) + 2) >> 3)) : (&pChipcHw->GpioSR_0_7 + ((pin) >> 3)))
+#define chipcHw_REG_CURRENT_POSITION(pin)               (((pin) > 42) ? ((((pin) + 2) & 0x00000007) << 2) : (((pin) & 0x00000007) << 2))
+
+#define chipcHw_REG_PULL_NONE                           0x00000000	/* No pull up register */
+#define chipcHw_REG_PULL_UP                             0x00000001	/* Pull up register enable */
+#define chipcHw_REG_PULL_DOWN                           0x00000002	/* Pull down register enable */
+#define chipcHw_REG_PULLUP_MASK                         0x00000003	/* Mask */
+							/* Pins beyond 42 are defined by skipping 4 bits */
+#define chipcHw_REG_PULLUP(pin)                         (((pin) > 42) ? (&pChipcHw->GpioPull_0_15 + (((pin) + 2) >> 4)) : (&pChipcHw->GpioPull_0_15 + ((pin) >> 4)))
+#define chipcHw_REG_PULLUP_POSITION(pin)                (((pin) > 42) ? ((((pin) + 2) & 0x0000000F) << 1) : (((pin) & 0x0000000F) << 1))
+
+#define chipcHw_REG_INPUTTYPE_CMOS                      0x00000000	/* Normal CMOS logic */
+#define chipcHw_REG_INPUTTYPE_ST                        0x00000001	/* High speed Schmitt Trigger */
+#define chipcHw_REG_INPUTTYPE_MASK                      0x00000001	/* Mask */
+							/* Pins beyond 42 are defined by skipping 2 bits */
+#define chipcHw_REG_INPUTTYPE(pin)                      (((pin) > 42) ? (&pChipcHw->GpioInput_0_31 + (((pin) + 2) >> 5)) : (&pChipcHw->GpioInput_0_31 + ((pin) >> 5)))
+#define chipcHw_REG_INPUTTYPE_POSITION(pin)             (((pin) > 42) ? ((((pin) + 2) & 0x0000001F)) : (((pin) & 0x0000001F)))
+
+/* Device connected to the bus clock */
+#define chipcHw_REG_BUS_CLOCK_ARM                       0x00000001	/* Bus interface clock for ARM */
+#define chipcHw_REG_BUS_CLOCK_VDEC                      0x00000002	/* Bus interface clock for VDEC */
+#define chipcHw_REG_BUS_CLOCK_ARAM                      0x00000004	/* Bus interface clock for ARAM */
+#define chipcHw_REG_BUS_CLOCK_HPM                       0x00000008	/* Bus interface clock for HPM */
+#define chipcHw_REG_BUS_CLOCK_DDRC                      0x00000010	/* Bus interface clock for DDRC */
+#define chipcHw_REG_BUS_CLOCK_DMAC0                     0x00000020	/* Bus interface clock for DMAC0 */
+#define chipcHw_REG_BUS_CLOCK_DMAC1                     0x00000040	/* Bus interface clock for DMAC1 */
+#define chipcHw_REG_BUS_CLOCK_NVI                       0x00000080	/* Bus interface clock for NVI */
+#define chipcHw_REG_BUS_CLOCK_ESW                       0x00000100	/* Bus interface clock for ESW */
+#define chipcHw_REG_BUS_CLOCK_GE                        0x00000200	/* Bus interface clock for GE */
+#define chipcHw_REG_BUS_CLOCK_I2CH                      0x00000400	/* Bus interface clock for I2CH */
+#define chipcHw_REG_BUS_CLOCK_I2S0                      0x00000800	/* Bus interface clock for I2S0 */
+#define chipcHw_REG_BUS_CLOCK_I2S1                      0x00001000	/* Bus interface clock for I2S1 */
+#define chipcHw_REG_BUS_CLOCK_VRAM                      0x00002000	/* Bus interface clock for VRAM */
+#define chipcHw_REG_BUS_CLOCK_CLCD                      0x00004000	/* Bus interface clock for CLCD */
+#define chipcHw_REG_BUS_CLOCK_LDK                       0x00008000	/* Bus interface clock for LDK */
+#define chipcHw_REG_BUS_CLOCK_LED                       0x00010000	/* Bus interface clock for LED */
+#define chipcHw_REG_BUS_CLOCK_OTP                       0x00020000	/* Bus interface clock for OTP */
+#define chipcHw_REG_BUS_CLOCK_PIF                       0x00040000	/* Bus interface clock for PIF */
+#define chipcHw_REG_BUS_CLOCK_SPU                       0x00080000	/* Bus interface clock for SPU */
+#define chipcHw_REG_BUS_CLOCK_SDIO0                     0x00100000	/* Bus interface clock for SDIO0 */
+#define chipcHw_REG_BUS_CLOCK_SDIO1                     0x00200000	/* Bus interface clock for SDIO1 */
+#define chipcHw_REG_BUS_CLOCK_SPIH                      0x00400000	/* Bus interface clock for SPIH */
+#define chipcHw_REG_BUS_CLOCK_SPIS                      0x00800000	/* Bus interface clock for SPIS */
+#define chipcHw_REG_BUS_CLOCK_UART0                     0x01000000	/* Bus interface clock for UART0 */
+#define chipcHw_REG_BUS_CLOCK_UART1                     0x02000000	/* Bus interface clock for UART1 */
+#define chipcHw_REG_BUS_CLOCK_BBL                       0x04000000	/* Bus interface clock for BBL */
+#define chipcHw_REG_BUS_CLOCK_I2CS                      0x08000000	/* Bus interface clock for I2CS */
+#define chipcHw_REG_BUS_CLOCK_USBH                      0x10000000	/* Bus interface clock for USB Host */
+#define chipcHw_REG_BUS_CLOCK_USBD                      0x20000000	/* Bus interface clock for USB Device */
+#define chipcHw_REG_BUS_CLOCK_BROM                      0x40000000	/* Bus interface clock for Boot ROM */
+#define chipcHw_REG_BUS_CLOCK_TSC                       0x80000000	/* Bus interface clock for Touch screen */
+
+/* Software resets defines */
+#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL_HOLD          0x0000000080000000ULL	/* Reset Global VPM and hold */
+#define chipcHw_REG_SOFT_RESET_VPM_HOLD                 0x0000000040000000ULL	/* Reset VPM and hold */
+#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL               0x0000000020000000ULL	/* Reset Global VPM */
+#define chipcHw_REG_SOFT_RESET_VPM                      0x0000000010000000ULL	/* Reset VPM */
+#define chipcHw_REG_SOFT_RESET_KEYPAD                   0x0000000008000000ULL	/* Reset Key pad */
+#define chipcHw_REG_SOFT_RESET_LED                      0x0000000004000000ULL	/* Reset LED */
+#define chipcHw_REG_SOFT_RESET_SPU                      0x0000000002000000ULL	/* Reset SPU */
+#define chipcHw_REG_SOFT_RESET_RNG                      0x0000000001000000ULL	/* Reset RNG */
+#define chipcHw_REG_SOFT_RESET_PKA                      0x0000000000800000ULL	/* Reset PKA */
+#define chipcHw_REG_SOFT_RESET_LCD                      0x0000000000400000ULL	/* Reset LCD */
+#define chipcHw_REG_SOFT_RESET_PIF                      0x0000000000200000ULL	/* Reset PIF */
+#define chipcHw_REG_SOFT_RESET_I2CS                     0x0000000000100000ULL	/* Reset I2C Slave */
+#define chipcHw_REG_SOFT_RESET_I2CH                     0x0000000000080000ULL	/* Reset I2C Host */
+#define chipcHw_REG_SOFT_RESET_SDIO1                    0x0000000000040000ULL	/* Reset SDIO 1 */
+#define chipcHw_REG_SOFT_RESET_SDIO0                    0x0000000000020000ULL	/* Reset SDIO 0 */
+#define chipcHw_REG_SOFT_RESET_BBL                      0x0000000000010000ULL	/* Reset BBL */
+#define chipcHw_REG_SOFT_RESET_I2S1                     0x0000000000008000ULL	/* Reset I2S1 */
+#define chipcHw_REG_SOFT_RESET_I2S0                     0x0000000000004000ULL	/* Reset I2S0 */
+#define chipcHw_REG_SOFT_RESET_SPIS                     0x0000000000002000ULL	/* Reset SPI Slave */
+#define chipcHw_REG_SOFT_RESET_SPIH                     0x0000000000001000ULL	/* Reset SPI Host */
+#define chipcHw_REG_SOFT_RESET_GPIO1                    0x0000000000000800ULL	/* Reset GPIO block 1 */
+#define chipcHw_REG_SOFT_RESET_GPIO0                    0x0000000000000400ULL	/* Reset GPIO block 0 */
+#define chipcHw_REG_SOFT_RESET_UART1                    0x0000000000000200ULL	/* Reset UART 1 */
+#define chipcHw_REG_SOFT_RESET_UART0                    0x0000000000000100ULL	/* Reset UART 0 */
+#define chipcHw_REG_SOFT_RESET_NVI                      0x0000000000000080ULL	/* Reset NVI */
+#define chipcHw_REG_SOFT_RESET_WDOG                     0x0000000000000040ULL	/* Reset Watch dog */
+#define chipcHw_REG_SOFT_RESET_TMR                      0x0000000000000020ULL	/* Reset Timer */
+#define chipcHw_REG_SOFT_RESET_ETM                      0x0000000000000010ULL	/* Reset ETM */
+#define chipcHw_REG_SOFT_RESET_ARM_HOLD                 0x0000000000000008ULL	/* Reset ARM and HOLD */
+#define chipcHw_REG_SOFT_RESET_ARM                      0x0000000000000004ULL	/* Reset ARM */
+#define chipcHw_REG_SOFT_RESET_CHIP_WARM                0x0000000000000002ULL	/* Chip warm reset */
+#define chipcHw_REG_SOFT_RESET_CHIP_SOFT                0x0000000000000001ULL	/* Chip soft reset */
+#define chipcHw_REG_SOFT_RESET_VDEC                     0x0000100000000000ULL	/* Video decoder */
+#define chipcHw_REG_SOFT_RESET_GE                       0x0000080000000000ULL	/* Graphics engine */
+#define chipcHw_REG_SOFT_RESET_OTP                      0x0000040000000000ULL	/* Reset OTP */
+#define chipcHw_REG_SOFT_RESET_USB2                     0x0000020000000000ULL	/* Reset USB2 */
+#define chipcHw_REG_SOFT_RESET_USB1                     0x0000010000000000ULL	/* Reset USB 1 */
+#define chipcHw_REG_SOFT_RESET_USB                      0x0000008000000000ULL	/* Reset USB 1 and USB2 soft reset */
+#define chipcHw_REG_SOFT_RESET_ESW                      0x0000004000000000ULL	/* Reset Ethernet switch */
+#define chipcHw_REG_SOFT_RESET_ESWCLK                   0x0000002000000000ULL	/* Reset Ethernet switch clock */
+#define chipcHw_REG_SOFT_RESET_DDRPHY                   0x0000001000000000ULL	/* Reset DDR Physical */
+#define chipcHw_REG_SOFT_RESET_DDR                      0x0000000800000000ULL	/* Reset DDR Controller */
+#define chipcHw_REG_SOFT_RESET_TSC                      0x0000000400000000ULL	/* Reset Touch screen */
+#define chipcHw_REG_SOFT_RESET_PCM                      0x0000000200000000ULL	/* Reset PCM device */
+#define chipcHw_REG_SOFT_RESET_APM                      0x0000200100000000ULL	/* Reset APM device */
+
+#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL_UNHOLD        0x8000000000000000ULL	/* Unhold Global VPM */
+#define chipcHw_REG_SOFT_RESET_VPM_UNHOLD               0x4000000000000000ULL	/* Unhold VPM */
+#define chipcHw_REG_SOFT_RESET_ARM_UNHOLD               0x2000000000000000ULL	/* Unhold ARM reset  */
+#define chipcHw_REG_SOFT_RESET_UNHOLD_MASK              0xF000000000000000ULL	/* Mask to handle unhold request */
+
+/* Audio channel control defines */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_ALL            0x00000001	/* Enable all audio channel */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_A              0x00000002	/* Enable channel A */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_B              0x00000004	/* Enable channel B */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_C              0x00000008	/* Enable channel C */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_NTP_CLOCK      0x00000010	/* Enable NTP clock */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_PCM0_CLOCK     0x00000020	/* Enable PCM0 clock */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_PCM1_CLOCK     0x00000040	/* Enable PCM1 clock */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_APM_CLOCK      0x00000080	/* Enable APM clock */
+
+/* Misc. chip control defines */
+#define chipcHw_REG_MISC_CTRL_GE_SEL                    0x00040000	/* Select GE2/GE3 */
+#define chipcHw_REG_MISC_CTRL_I2S1_CLOCK_ONCHIP         0x00000000	/* Use on chip clock for I2S1 */
+#define chipcHw_REG_MISC_CTRL_I2S1_CLOCK_GPIO           0x00020000	/* Use external clock via GPIO pin 26 for I2S1 */
+#define chipcHw_REG_MISC_CTRL_I2S0_CLOCK_ONCHIP         0x00000000	/* Use on chip clock for I2S0 */
+#define chipcHw_REG_MISC_CTRL_I2S0_CLOCK_GPIO           0x00010000	/* Use external clock via GPIO pin 45 for I2S0 */
+#define chipcHw_REG_MISC_CTRL_ARM_CP15_DISABLE          0x00008000	/* Disable ARM CP15 bit */
+#define chipcHw_REG_MISC_CTRL_RTC_DISABLE               0x00000008	/* Disable RTC registers */
+#define chipcHw_REG_MISC_CTRL_BBRAM_DISABLE             0x00000004	/* Disable Battery Backed RAM */
+#define chipcHw_REG_MISC_CTRL_USB_MODE_HOST             0x00000002	/* Set USB as host */
+#define chipcHw_REG_MISC_CTRL_USB_MODE_DEVICE           0xFFFFFFFD	/* Set USB as device */
+#define chipcHw_REG_MISC_CTRL_USB_POWERON               0xFFFFFFFE	/* Power up USB */
+#define chipcHw_REG_MISC_CTRL_USB_POWEROFF              0x00000001	/* Power down USB */
+
+/* OTP configuration defines */
+#define chipcHw_REG_OTP_SECURITY_OFF                    0x0000020000000000ULL	/* Security support is OFF */
+#define chipcHw_REG_OTP_SPU_SLOW                        0x0000010000000000ULL	/* Limited SPU throughput */
+#define chipcHw_REG_OTP_LCD_SPEED                       0x0000000600000000ULL	/* Set VPM speed one */
+#define chipcHw_REG_OTP_VPM_SPEED_1                     0x0000000100000000ULL	/* Set VPM speed one */
+#define chipcHw_REG_OTP_VPM_SPEED_0                     0x0000000080000000ULL	/* Set VPM speed zero */
+#define chipcHw_REG_OTP_AXI_SPEED                       0x0000000060000000ULL	/* Set maximum AXI bus speed */
+#define chipcHw_REG_OTP_APM_DISABLE                     0x000000001F000000ULL	/* Disable APM */
+#define chipcHw_REG_OTP_PIF_DISABLE                     0x0000000000200000ULL	/* Disable PIF */
+#define chipcHw_REG_OTP_VDEC_DISABLE                    0x0000000000100000ULL	/* Disable Video decoder */
+#define chipcHw_REG_OTP_BBL_DISABLE                     0x0000000000080000ULL	/* Disable RTC and BBRAM */
+#define chipcHw_REG_OTP_LED_DISABLE                     0x0000000000040000ULL	/* Disable LED */
+#define chipcHw_REG_OTP_GE_DISABLE                      0x0000000000020000ULL	/* Disable Graphics Engine */
+#define chipcHw_REG_OTP_LCD_DISABLE                     0x0000000000010000ULL	/* Disable LCD */
+#define chipcHw_REG_OTP_KEYPAD_DISABLE                  0x0000000000008000ULL	/* Disable keypad */
+#define chipcHw_REG_OTP_UART_DISABLE                    0x0000000000004000ULL	/* Disable UART */
+#define chipcHw_REG_OTP_SDIOH_DISABLE                   0x0000000000003000ULL	/* Disable SDIO host */
+#define chipcHw_REG_OTP_HSS_DISABLE                     0x0000000000000C00ULL	/* Disable HSS */
+#define chipcHw_REG_OTP_TSC_DISABLE                     0x0000000000000200ULL	/* Disable touch screen */
+#define chipcHw_REG_OTP_USB_DISABLE                     0x0000000000000180ULL	/* Disable USB */
+#define chipcHw_REG_OTP_SGMII_DISABLE                   0x0000000000000060ULL	/* Disable SGMII */
+#define chipcHw_REG_OTP_ETH_DISABLE                     0x0000000000000018ULL	/* Disable gigabit ethernet */
+#define chipcHw_REG_OTP_ETH_PHY_DISABLE                 0x0000000000000006ULL	/* Disable ethernet PHY */
+#define chipcHw_REG_OTP_VPM_DISABLE                     0x0000000000000001ULL	/* Disable VPM */
+
+/* Sticky bit defines */
+#define chipcHw_REG_STICKY_BOOT_DONE                    0x00000001	/* Boot done */
+#define chipcHw_REG_STICKY_SOFT_RESET                   0x00000002	/* ARM soft reset */
+#define chipcHw_REG_STICKY_GENERAL_1                    0x00000004	/* General purpose bit 1 */
+#define chipcHw_REG_STICKY_GENERAL_2                    0x00000008	/* General purpose bit 2 */
+#define chipcHw_REG_STICKY_GENERAL_3                    0x00000010	/* General purpose bit 3 */
+#define chipcHw_REG_STICKY_GENERAL_4                    0x00000020	/* General purpose bit 4 */
+#define chipcHw_REG_STICKY_GENERAL_5                    0x00000040	/* General purpose bit 5 */
+#define chipcHw_REG_STICKY_POR_BROM                     0x00000080	/* Special sticky bit for security - set in BROM to avoid other modes being entered */
+#define chipcHw_REG_STICKY_ARM_RESET                    0x00000100	/* ARM reset */
+#define chipcHw_REG_STICKY_CHIP_SOFT_RESET              0x00000200	/* Chip soft reset */
+#define chipcHw_REG_STICKY_CHIP_WARM_RESET              0x00000400	/* Chip warm reset */
+#define chipcHw_REG_STICKY_WDOG_RESET                   0x00000800	/* Watchdog reset */
+#define chipcHw_REG_STICKY_OTP_RESET                    0x00001000	/* OTP reset */
+
+							/* HW phase alignment defines *//* Spare1 register definitions */
+#define chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE        0x80000000	/* Enable DDR phase align panic interrupt */
+#define chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE        0x40000000	/* Enable VPM phase align panic interrupt */
+#define chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE        0x00000002	/* Enable access to VPM using system BUS */
+#define chipcHw_REG_SPARE1_DDR_BUS_ACCESS_ENABLE        0x00000001	/* Enable access to DDR using system BUS */
+							/* DDRPhaseCtrl1 register definitions */
+#define chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE            0x80000000	/* Enable DDR SW phase alignment */
+#define chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE            0x40000000	/* Enable DDR HW phase alignment */
+#define chipcHw_REG_DDR_PHASE_VALUE_GE_MASK             0x0000007F	/* DDR lower threshold for phase alignment */
+#define chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT            23
+#define chipcHw_REG_DDR_PHASE_VALUE_LE_MASK             0x0000007F	/* DDR upper threshold for phase alignment */
+#define chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT            16
+#define chipcHw_REG_DDR_PHASE_ALIGN_WAIT_CYCLE_MASK     0x0000FFFF	/* BUS Cycle to wait to run next DDR phase alignment */
+#define chipcHw_REG_DDR_PHASE_ALIGN_WAIT_CYCLE_SHIFT    0
+							/* VPMPhaseCtrl1 register definitions */
+#define chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE            0x80000000	/* Enable VPM SW phase alignment */
+#define chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE            0x40000000	/* Enable VPM HW phase alignment */
+#define chipcHw_REG_VPM_PHASE_VALUE_GE_MASK             0x0000007F	/* VPM lower threshold for phase alignment */
+#define chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT            23
+#define chipcHw_REG_VPM_PHASE_VALUE_LE_MASK             0x0000007F	/* VPM upper threshold for phase alignment */
+#define chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT            16
+#define chipcHw_REG_VPM_PHASE_ALIGN_WAIT_CYCLE_MASK     0x0000FFFF	/* BUS Cycle to wait to complete the VPM phase alignment */
+#define chipcHw_REG_VPM_PHASE_ALIGN_WAIT_CYCLE_SHIFT    0
+							/* PhaseAlignStatus register definitions */
+#define chipcHw_REG_DDR_TIMEOUT_INTR_STATUS             0x80000000	/* DDR time out interrupt status */
+#define chipcHw_REG_DDR_PHASE_STATUS_MASK               0x0000007F	/* DDR phase status value */
+#define chipcHw_REG_DDR_PHASE_STATUS_SHIFT              24
+#define chipcHw_REG_DDR_PHASE_ALIGNED                   0x00800000	/* DDR Phase aligned status */
+#define chipcHw_REG_DDR_LOAD                            0x00400000	/* Load DDR phase status */
+#define chipcHw_REG_DDR_PHASE_CTRL_MASK                 0x0000003F	/* DDR phase control value */
+#define chipcHw_REG_DDR_PHASE_CTRL_SHIFT                16
+#define chipcHw_REG_VPM_TIMEOUT_INTR_STATUS             0x80000000	/* VPM time out interrupt status */
+#define chipcHw_REG_VPM_PHASE_STATUS_MASK               0x0000007F	/* VPM phase status value */
+#define chipcHw_REG_VPM_PHASE_STATUS_SHIFT              8
+#define chipcHw_REG_VPM_PHASE_ALIGNED                   0x00000080	/* VPM Phase aligned status */
+#define chipcHw_REG_VPM_LOAD                            0x00000040	/* Load VPM phase status */
+#define chipcHw_REG_VPM_PHASE_CTRL_MASK                 0x0000003F	/* VPM phase control value */
+#define chipcHw_REG_VPM_PHASE_CTRL_SHIFT                0
+							/* DDRPhaseCtrl2 register definitions */
+#define chipcHw_REG_DDR_INTR_SERVICED                   0x02000000	/* Acknowledge that interrupt was serviced */
+#define chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE             0x01000000	/* Enable time out interrupt */
+#define chipcHw_REG_DDR_LOAD_COUNT_PHASE_CTRL_MASK      0x0000000F	/* Wait before toggling load_ch */
+#define chipcHw_REG_DDR_LOAD_COUNT_PHASE_CTRL_SHIFT     20
+#define chipcHw_REG_DDR_TOTAL_LOAD_COUNT_CTRL_MASK      0x0000000F	/* Total wait to settle ph_ctrl and load_ch */
+#define chipcHw_REG_DDR_TOTAL_LOAD_COUNT_CTRL_SHIFT     16
+#define chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK        0x0000FFFF	/* Time out value for DDR HW phase alignment */
+#define chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT       0
+							/* VPMPhaseCtrl2 register definitions */
+#define chipcHw_REG_VPM_INTR_SELECT_MASK                0x00000003	/* Interrupt select */
+#define chipcHw_REG_VPM_INTR_SELECT_SHIFT               26
+#define chipcHw_REG_VPM_INTR_DISABLE                    0x00000000
+#define chipcHw_REG_VPM_INTR_FAST                       (0x1 << chipcHw_REG_VPM_INTR_SELECT_SHIFT)
+#define chipcHw_REG_VPM_INTR_MEDIUM                     (0x2 << chipcHw_REG_VPM_INTR_SELECT_SHIFT)
+#define chipcHw_REG_VPM_INTR_SLOW                       (0x3 << chipcHw_REG_VPM_INTR_SELECT_SHIFT)
+#define chipcHw_REG_VPM_INTR_SERVICED                   0x02000000	/* Acknowledge that interrupt was serviced */
+#define chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE             0x01000000	/* Enable time out interrupt */
+#define chipcHw_REG_VPM_LOAD_COUNT_PHASE_CTRL_MASK      0x0000000F	/* Wait before toggling load_ch */
+#define chipcHw_REG_VPM_LOAD_COUNT_PHASE_CTRL_SHIFT     20
+#define chipcHw_REG_VPM_TOTAL_LOAD_COUNT_CTRL_MASK      0x0000000F	/* Total wait cycle to settle ph_ctrl and load_ch */
+#define chipcHw_REG_VPM_TOTAL_LOAD_COUNT_CTRL_SHIFT     16
+#define chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK        0x0000FFFF	/* Time out value for VPM HW phase alignment */
+#define chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT       0
+
+#endif /* CHIPCHW_REG_H */
-- 
cgit v1.2.3


From 2c4b57a204669a7b649f3eb891d3d0f0eba75321 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:05:37 +0100
Subject: ARM: 5655/1: bcmring: add csp chipc hardware definition file

add csp chipc hardware definition file

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 .../mach-bcmring/include/mach/csp/chipcHw_def.h    | 1123 ++++++++++++++++++++
 1 file changed, 1123 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h

(limited to 'arch/arm')

diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h
new file mode 100644
index 00000000000..70eaea866cf
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h
@@ -0,0 +1,1123 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CHIPC_DEF_H
+#define CHIPC_DEF_H
+
+/* ---- Include Files ----------------------------------------------------- */
+
+#include <csp/stdint.h>
+#include <csp/errno.h>
+#include <csp/reg.h>
+#include <mach/csp/chipcHw_reg.h>
+
+/* ---- Public Constants and Types ---------------------------------------- */
+
+/* Set 1 to configure DDR/VPM phase alignment by HW */
+#define chipcHw_DDR_HW_PHASE_ALIGN    0
+#define chipcHw_VPM_HW_PHASE_ALIGN    0
+
+typedef uint32_t chipcHw_freq;
+
+/* Configurable miscellaneous clocks */
+typedef enum {
+	chipcHw_CLOCK_DDR,	/* DDR PHY Clock */
+	chipcHw_CLOCK_ARM,	/* ARM Clock */
+	chipcHw_CLOCK_ESW,	/* Ethernet Switch Clock */
+	chipcHw_CLOCK_VPM,	/* VPM Clock */
+	chipcHw_CLOCK_ESW125,	/* Ethernet MII Clock */
+	chipcHw_CLOCK_UART,	/* UART Clock */
+	chipcHw_CLOCK_SDIO0,	/* SDIO 0 Clock */
+	chipcHw_CLOCK_SDIO1,	/* SDIO 1 Clock */
+	chipcHw_CLOCK_SPI,	/* SPI Clock */
+	chipcHw_CLOCK_ETM,	/* ARM ETM Clock */
+
+	chipcHw_CLOCK_BUS,	/* BUS Clock */
+	chipcHw_CLOCK_OTP,	/* OTP Clock */
+	chipcHw_CLOCK_I2C,	/* I2C Host Clock */
+	chipcHw_CLOCK_I2S0,	/* I2S 0 Host Clock */
+	chipcHw_CLOCK_RTBUS,	/* DDR PHY Configuration Clock */
+	chipcHw_CLOCK_APM100,	/* APM100 Clock */
+	chipcHw_CLOCK_TSC,	/* Touch screen Clock */
+	chipcHw_CLOCK_LED,	/* LED Clock */
+
+	chipcHw_CLOCK_USB,	/* USB Clock */
+	chipcHw_CLOCK_LCD,	/* LCD CLock */
+	chipcHw_CLOCK_APM,	/* APM Clock */
+
+	chipcHw_CLOCK_I2S1,	/* I2S 1 Host Clock */
+} chipcHw_CLOCK_e;
+
+/* System booting strap options */
+typedef enum {
+	chipcHw_BOOT_DEVICE_UART = chipcHw_STRAPS_BOOT_DEVICE_UART,
+	chipcHw_BOOT_DEVICE_SERIAL_FLASH =
+	    chipcHw_STRAPS_BOOT_DEVICE_SERIAL_FLASH,
+	chipcHw_BOOT_DEVICE_NOR_FLASH_16 =
+	    chipcHw_STRAPS_BOOT_DEVICE_NOR_FLASH_16,
+	chipcHw_BOOT_DEVICE_NAND_FLASH_8 =
+	    chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_8,
+	chipcHw_BOOT_DEVICE_NAND_FLASH_16 =
+	    chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_16
+} chipcHw_BOOT_DEVICE_e;
+
+/* System booting modes */
+typedef enum {
+	chipcHw_BOOT_MODE_NORMAL = chipcHw_STRAPS_BOOT_MODE_NORMAL,
+	chipcHw_BOOT_MODE_DBG_SW = chipcHw_STRAPS_BOOT_MODE_DBG_SW,
+	chipcHw_BOOT_MODE_DBG_BOOT = chipcHw_STRAPS_BOOT_MODE_DBG_BOOT,
+	chipcHw_BOOT_MODE_NORMAL_QUIET = chipcHw_STRAPS_BOOT_MODE_NORMAL_QUIET
+} chipcHw_BOOT_MODE_e;
+
+/* NAND Flash page size strap options */
+typedef enum {
+	chipcHw_NAND_PAGESIZE_512 = chipcHw_STRAPS_NAND_PAGESIZE_512,
+	chipcHw_NAND_PAGESIZE_2048 = chipcHw_STRAPS_NAND_PAGESIZE_2048,
+	chipcHw_NAND_PAGESIZE_4096 = chipcHw_STRAPS_NAND_PAGESIZE_4096,
+	chipcHw_NAND_PAGESIZE_EXT = chipcHw_STRAPS_NAND_PAGESIZE_EXT
+} chipcHw_NAND_PAGESIZE_e;
+
+/* GPIO Pin function */
+typedef enum {
+	chipcHw_GPIO_FUNCTION_KEYPAD = chipcHw_REG_GPIO_MUX_KEYPAD,
+	chipcHw_GPIO_FUNCTION_I2CH = chipcHw_REG_GPIO_MUX_I2CH,
+	chipcHw_GPIO_FUNCTION_SPI = chipcHw_REG_GPIO_MUX_SPI,
+	chipcHw_GPIO_FUNCTION_UART = chipcHw_REG_GPIO_MUX_UART,
+	chipcHw_GPIO_FUNCTION_LEDMTXP = chipcHw_REG_GPIO_MUX_LEDMTXP,
+	chipcHw_GPIO_FUNCTION_LEDMTXS = chipcHw_REG_GPIO_MUX_LEDMTXS,
+	chipcHw_GPIO_FUNCTION_SDIO0 = chipcHw_REG_GPIO_MUX_SDIO0,
+	chipcHw_GPIO_FUNCTION_SDIO1 = chipcHw_REG_GPIO_MUX_SDIO1,
+	chipcHw_GPIO_FUNCTION_PCM = chipcHw_REG_GPIO_MUX_PCM,
+	chipcHw_GPIO_FUNCTION_I2S = chipcHw_REG_GPIO_MUX_I2S,
+	chipcHw_GPIO_FUNCTION_ETM = chipcHw_REG_GPIO_MUX_ETM,
+	chipcHw_GPIO_FUNCTION_DEBUG = chipcHw_REG_GPIO_MUX_DEBUG,
+	chipcHw_GPIO_FUNCTION_MISC = chipcHw_REG_GPIO_MUX_MISC,
+	chipcHw_GPIO_FUNCTION_GPIO = chipcHw_REG_GPIO_MUX_GPIO
+} chipcHw_GPIO_FUNCTION_e;
+
+/* PIN Output slew rate */
+typedef enum {
+	chipcHw_PIN_SLEW_RATE_HIGH = chipcHw_REG_SLEW_RATE_HIGH,
+	chipcHw_PIN_SLEW_RATE_NORMAL = chipcHw_REG_SLEW_RATE_NORMAL
+} chipcHw_PIN_SLEW_RATE_e;
+
+/* PIN Current drive strength */
+typedef enum {
+	chipcHw_PIN_CURRENT_STRENGTH_2mA = chipcHw_REG_CURRENT_STRENGTH_2mA,
+	chipcHw_PIN_CURRENT_STRENGTH_4mA = chipcHw_REG_CURRENT_STRENGTH_4mA,
+	chipcHw_PIN_CURRENT_STRENGTH_6mA = chipcHw_REG_CURRENT_STRENGTH_6mA,
+	chipcHw_PIN_CURRENT_STRENGTH_8mA = chipcHw_REG_CURRENT_STRENGTH_8mA,
+	chipcHw_PIN_CURRENT_STRENGTH_10mA = chipcHw_REG_CURRENT_STRENGTH_10mA,
+	chipcHw_PIN_CURRENT_STRENGTH_12mA = chipcHw_REG_CURRENT_STRENGTH_12mA
+} chipcHw_PIN_CURRENT_STRENGTH_e;
+
+/* PIN Pull up register settings */
+typedef enum {
+	chipcHw_PIN_PULL_NONE = chipcHw_REG_PULL_NONE,
+	chipcHw_PIN_PULL_UP = chipcHw_REG_PULL_UP,
+	chipcHw_PIN_PULL_DOWN = chipcHw_REG_PULL_DOWN
+} chipcHw_PIN_PULL_e;
+
+/* PIN input type settings */
+typedef enum {
+	chipcHw_PIN_INPUTTYPE_CMOS = chipcHw_REG_INPUTTYPE_CMOS,
+	chipcHw_PIN_INPUTTYPE_ST = chipcHw_REG_INPUTTYPE_ST
+} chipcHw_PIN_INPUTTYPE_e;
+
+/* Allow/Disalow the support of spread spectrum  */
+typedef enum {
+	chipcHw_SPREAD_SPECTRUM_DISALLOW,	/* Spread spectrum support is not allowed */
+	chipcHw_SPREAD_SPECTRUM_ALLOW	/* Spread spectrum support is allowed */
+} chipcHw_SPREAD_SPECTRUM_e;
+
+typedef struct {
+	chipcHw_SPREAD_SPECTRUM_e ssSupport;	/* Allow/Disalow to support spread spectrum.
+						   If supported, call chipcHw_enableSpreadSpectrum ()
+						   to activate the spread spectrum with desired spread. */
+	uint32_t pllVcoFreqHz;	/* PLL VCO frequency in Hz */
+	uint32_t pll2VcoFreqHz;	/* PLL2 VCO frequency in Hz */
+	uint32_t busClockFreqHz;	/* Bus clock frequency in Hz */
+	uint32_t armBusRatio;	/* ARM clock : Bus clock */
+	uint32_t vpmBusRatio;	/* VPM clock : Bus clock */
+	uint32_t ddrBusRatio;	/* DDR clock : Bus clock */
+} chipcHw_INIT_PARAM_t;
+
+/* CHIP revision number */
+typedef enum {
+	chipcHw_REV_NUMBER_A0 = chipcHw_REG_REV_A0,
+	chipcHw_REV_NUMBER_B0 = chipcHw_REG_REV_B0
+} chipcHw_REV_NUMBER_e;
+
+typedef enum {
+	chipcHw_VPM_HW_PHASE_INTR_DISABLE = chipcHw_REG_VPM_INTR_DISABLE,
+	chipcHw_VPM_HW_PHASE_INTR_FAST = chipcHw_REG_VPM_INTR_FAST,
+	chipcHw_VPM_HW_PHASE_INTR_MEDIUM = chipcHw_REG_VPM_INTR_MEDIUM,
+	chipcHw_VPM_HW_PHASE_INTR_SLOW = chipcHw_REG_VPM_INTR_SLOW
+} chipcHw_VPM_HW_PHASE_INTR_e;
+
+typedef enum {
+	chipcHw_DDR_HW_PHASE_MARGIN_STRICT,	/*  Strict margin for DDR phase align condition */
+	chipcHw_DDR_HW_PHASE_MARGIN_MEDIUM,	/*  Medium margin for DDR phase align condition */
+	chipcHw_DDR_HW_PHASE_MARGIN_WIDE	/*  Wider margin for DDR phase align condition */
+} chipcHw_DDR_HW_PHASE_MARGIN_e;
+
+typedef enum {
+	chipcHw_VPM_HW_PHASE_MARGIN_STRICT,	/*  Strict margin for VPM phase align condition */
+	chipcHw_VPM_HW_PHASE_MARGIN_MEDIUM,	/*  Medium margin for VPM phase align condition */
+	chipcHw_VPM_HW_PHASE_MARGIN_WIDE	/*  Wider margin for VPM phase align condition */
+} chipcHw_VPM_HW_PHASE_MARGIN_e;
+
+#define chipcHw_XTAL_FREQ_Hz                    25000000	/* Reference clock frequency in Hz */
+
+/* Programable pin defines */
+#define chipcHw_PIN_GPIO(n)                     ((((n) >= 0) && ((n) < (chipcHw_GPIO_COUNT))) ? (n) : 0xFFFFFFFF)
+									     /* GPIO pin 0 - 60 */
+#define chipcHw_PIN_UARTTXD                     (chipcHw_GPIO_COUNT + 0)	/* UART Transmit */
+#define chipcHw_PIN_NVI_A                       (chipcHw_GPIO_COUNT + 1)	/* NVI Interface */
+#define chipcHw_PIN_NVI_D                       (chipcHw_GPIO_COUNT + 2)	/* NVI Interface */
+#define chipcHw_PIN_NVI_OEB                     (chipcHw_GPIO_COUNT + 3)	/* NVI Interface */
+#define chipcHw_PIN_NVI_WEB                     (chipcHw_GPIO_COUNT + 4)	/* NVI Interface */
+#define chipcHw_PIN_NVI_CS                      (chipcHw_GPIO_COUNT + 5)	/* NVI Interface */
+#define chipcHw_PIN_NVI_NAND_CSB                (chipcHw_GPIO_COUNT + 6)	/* NVI Interface */
+#define chipcHw_PIN_NVI_FLASHWP                 (chipcHw_GPIO_COUNT + 7)	/* NVI Interface */
+#define chipcHw_PIN_NVI_NAND_RDYB               (chipcHw_GPIO_COUNT + 8)	/* NVI Interface */
+#define chipcHw_PIN_CL_DATA_0_17                (chipcHw_GPIO_COUNT + 9)	/* LCD Data 0 - 17 */
+#define chipcHw_PIN_CL_DATA_18_20               (chipcHw_GPIO_COUNT + 10)	/* LCD Data 18 - 20 */
+#define chipcHw_PIN_CL_DATA_21_23               (chipcHw_GPIO_COUNT + 11)	/* LCD Data 21 - 23 */
+#define chipcHw_PIN_CL_POWER                    (chipcHw_GPIO_COUNT + 12)	/* LCD Power */
+#define chipcHw_PIN_CL_ACK                      (chipcHw_GPIO_COUNT + 13)	/* LCD Ack */
+#define chipcHw_PIN_CL_FP                       (chipcHw_GPIO_COUNT + 14)	/* LCD FP */
+#define chipcHw_PIN_CL_LP                       (chipcHw_GPIO_COUNT + 15)	/* LCD LP */
+#define chipcHw_PIN_UARTRXD                     (chipcHw_GPIO_COUNT + 16)	/* UART Receive */
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+/****************************************************************************/
+/**
+*  @brief  Initializes the clock module
+*
+*/
+/****************************************************************************/
+void chipcHw_Init(chipcHw_INIT_PARAM_t *initParam	/*  [ IN ] Misc chip initialization parameter */
+    ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief  Enables the PLL1
+*
+*  This function enables the PLL1
+*
+*/
+/****************************************************************************/
+void chipcHw_pll1Enable(uint32_t vcoFreqHz,	/*  [ IN ] VCO frequency in Hz */
+			chipcHw_SPREAD_SPECTRUM_e ssSupport	/*  [ IN ] SS status */
+    ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief  Enables the PLL2
+*
+*  This function enables the PLL2
+*
+*/
+/****************************************************************************/
+void chipcHw_pll2Enable(uint32_t vcoFreqHz	/*  [ IN ] VCO frequency in Hz */
+    ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief  Disable the PLL1
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_pll1Disable(void);
+
+/****************************************************************************/
+/**
+*  @brief  Disable the PLL2
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_pll2Disable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Set clock fequency for miscellaneous configurable clocks
+*
+*  This function sets clock frequency
+*
+*  @return  Configured clock frequency in KHz
+*
+*/
+/****************************************************************************/
+chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
+    ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Set clock fequency for miscellaneous configurable clocks
+*
+*  This function sets clock frequency
+*
+*  @return  Configured clock frequency in Hz
+*
+*/
+/****************************************************************************/
+chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock,	/*  [ IN ] Configurable clock */
+				       uint32_t freq	/*  [ IN ] Clock frequency in Hz */
+    ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM clock in sync with BUS clock
+*
+*  This function does the phase adjustment between VPM and BUS clock
+*
+*  @return >= 0 : On success ( # of adjustment required )
+*            -1 : On failure
+*/
+/****************************************************************************/
+int chipcHw_vpmPhaseAlign(void);
+
+/****************************************************************************/
+/**
+*  @brief   Enables core a clock of a certain device
+*
+*  This function enables a core clock
+*
+*  @return  void
+*
+*  @note    Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_setClockEnable(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Disabled a core clock of a certain device
+*
+*  This function disables a core clock
+*
+*  @return  void
+*
+*  @note    Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_setClockDisable(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Enables bypass clock of a certain device
+*
+*  This function enables bypass clock
+*
+*  @note    Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_bypassClockEnable(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Disabled bypass clock of a certain device
+*
+*  This function disables bypass clock
+*
+*  @note    Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_bypassClockDisable(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Get Numeric Chip ID
+*
+*  This function returns Chip ID that includes the revison number
+*
+*  @return  Complete numeric Chip ID
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getChipId(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get Chip Product ID
+*
+*  This function returns Chip Product ID
+*
+*  @return  Chip Product ID
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getChipProductId(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get revision number
+*
+*  This function returns revision number of the chip
+*
+*  @return  Revision number
+*/
+/****************************************************************************/
+static inline chipcHw_REV_NUMBER_e chipcHw_getChipRevisionNumber(void);
+
+/****************************************************************************/
+/**
+*  @brief   Enables bus interface clock
+*
+*  Enables  bus interface clock of various device
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_BUS_CLOCK_XXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_busInterfaceClockEnable(uint32_t mask	/*  [ IN ] Bit map of type  chipcHw_REG_BUS_CLOCK_XXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Disables bus interface clock
+*
+*  Disables  bus interface clock of various device
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_BUS_CLOCK_XXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_busInterfaceClockDisable(uint32_t mask	/*  [ IN ] Bit map of type  chipcHw_REG_BUS_CLOCK_XXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Enables various audio channels
+*
+*  Enables audio channel
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_audioChannelEnable(uint32_t mask	/*  [ IN ] Bit map of type  chipcHw_REG_AUDIO_CHANNEL_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Disables various audio channels
+*
+*  Disables audio channel
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_audioChannelDisable(uint32_t mask	/*  [ IN ] Bit map of type  chipcHw_REG_AUDIO_CHANNEL_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief    Soft resets devices
+*
+*  Soft resets various devices
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_SOFT_RESET_XXXXXX defines
+*/
+/****************************************************************************/
+static inline void chipcHw_softReset(uint64_t mask	/*  [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */
+    );
+
+static inline void chipcHw_softResetDisable(uint64_t mask	/*  [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */
+    );
+
+static inline void chipcHw_softResetEnable(uint64_t mask	/*  [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief    Configures misc CHIP functionality
+*
+*  Configures CHIP functionality
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_MISC_CTRL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_miscControl(uint32_t mask	/*  [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */
+    );
+
+static inline void chipcHw_miscControlDisable(uint32_t mask	/*  [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */
+    );
+
+static inline void chipcHw_miscControlEnable(uint32_t mask	/*  [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief    Set OTP options
+*
+*  Set OTP options
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_OTP_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_setOTPOption(uint64_t mask	/*  [ IN ] Bit map of type chipcHw_REG_OTP_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief    Get sticky bits
+*
+*  @return   Sticky bit options of type chipcHw_REG_STICKY_XXXXXX
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getStickyBits(void);
+
+/****************************************************************************/
+/**
+*  @brief    Set sticky bits
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_STICKY_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_setStickyBits(uint32_t mask	/*  [ IN ] Bit map of type chipcHw_REG_STICKY_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief    Clear sticky bits
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_STICKY_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_clearStickyBits(uint32_t mask	/*  [ IN ] Bit map of type chipcHw_REG_STICKY_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief    Get software override strap options
+*
+*  Retrieves software override strap options
+*
+*  @return   Software override strap value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getSoftStraps(void);
+
+/****************************************************************************/
+/**
+*  @brief    Set software override strap options
+*
+*  set software override strap options
+*
+*  @return   nothing
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setSoftStraps(uint32_t strapOptions);
+
+/****************************************************************************/
+/**
+*  @brief    Get pin strap options
+*
+*  Retrieves pin strap options
+*
+*  @return   Pin strap value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getPinStraps(void);
+
+/****************************************************************************/
+/**
+*  @brief    Get valid pin strap options
+*
+*  Retrieves valid pin strap options
+*
+*  @return   valid Pin strap value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getValidStraps(void);
+
+/****************************************************************************/
+/**
+*  @brief    Initialize valid pin strap options
+*
+*  Retrieves valid pin strap options by copying HW strap options to soft register
+*  (if chipcHw_STRAPS_SOFT_OVERRIDE not set)
+*
+*  @return   nothing
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_initValidStraps(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get status (enabled/disabled) of bus interface clock
+*
+*  This function returns the status of devices' bus interface clock
+*
+*  @return  Bus interface clock
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getBusInterfaceClockStatus(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get boot device
+*
+*  This function returns the device type used in booting the system
+*
+*  @return  Boot device of type chipcHw_BOOT_DEVICE_e
+*
+*/
+/****************************************************************************/
+static inline chipcHw_BOOT_DEVICE_e chipcHw_getBootDevice(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get boot mode
+*
+*  This function returns the way the system was booted
+*
+*  @return  Boot mode of type chipcHw_BOOT_MODE_e
+*
+*/
+/****************************************************************************/
+static inline chipcHw_BOOT_MODE_e chipcHw_getBootMode(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get NAND flash page size
+*
+*  This function returns the NAND device page size
+*
+*  @return  Boot NAND device page size
+*
+*/
+/****************************************************************************/
+static inline chipcHw_NAND_PAGESIZE_e chipcHw_getNandPageSize(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get NAND flash address cycle configuration
+*
+*  This function returns the NAND flash address cycle configuration
+*
+*  @return  0 = Do not extra address cycle, 1 = Add extra cycle
+*
+*/
+/****************************************************************************/
+static inline int chipcHw_getNandExtraCycle(void);
+
+/****************************************************************************/
+/**
+*  @brief   Activates PIF interface
+*
+*  This function activates PIF interface by taking control of LCD pins
+*
+*  @note
+*       When activated, LCD pins will be defined as follows for PIF operation
+*
+*       CLD[17:0]  = pif_data[17:0]
+*       CLD[23:18] = pif_address[5:0]
+*       CLPOWER    = pif_wr_str
+*       CLCP       = pif_rd_str
+*       CLAC       = pif_hat1
+*       CLFP       = pif_hrdy1
+*       CLLP       = pif_hat2
+*       GPIO[42]   = pif_hrdy2
+*
+*       In PIF mode, "pif_hrdy2" overrides other shared function for GPIO[42] pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_activatePifInterface(void);
+
+/****************************************************************************/
+/**
+*  @brief   Activates LCD interface
+*
+*  This function activates LCD interface
+*
+*  @note
+*       When activated, LCD pins will be defined as follows
+*
+*       CLD[17:0]  = LCD data
+*       CLD[23:18] = LCD data
+*       CLPOWER    = LCD power
+*       CLCP       =
+*       CLAC       = LCD ack
+*       CLFP       =
+*       CLLP       =
+*/
+/****************************************************************************/
+static inline void chipcHw_activateLcdInterface(void);
+
+/****************************************************************************/
+/**
+*  @brief   Deactivates PIF/LCD interface
+*
+*  This function deactivates PIF/LCD interface
+*
+*  @note
+*       When deactivated LCD pins will be in rti-stated
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_deactivatePifLcdInterface(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get to know the configuration of GPIO pin
+*
+*/
+/****************************************************************************/
+static inline chipcHw_GPIO_FUNCTION_e chipcHw_getGpioPinFunction(int pin	/* GPIO Pin number */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Configure GPIO pin function
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setGpioPinFunction(int pin,	/* GPIO Pin number */
+					      chipcHw_GPIO_FUNCTION_e func	/* Configuration function */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin slew rate
+*
+*  This function sets the slew of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinSlewRate(uint32_t pin,	/* Pin of type chipcHw_PIN_XXXXX */
+					  chipcHw_PIN_SLEW_RATE_e slewRate	/* Pin slew rate */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin output drive current
+*
+*  This function sets output drive current of individual pin
+*
+*  Note: Avoid the use of the word 'current' since linux headers define this
+*        to be the current task.
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinOutputCurrent(uint32_t pin,	/* Pin of type chipcHw_PIN_XXXXX */
+					       chipcHw_PIN_CURRENT_STRENGTH_e curr	/* Pin current rating */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin pullup register
+*
+*  This function sets pullup register of individual  pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinPullup(uint32_t pin,	/* Pin of type chipcHw_PIN_XXXXX */
+					chipcHw_PIN_PULL_e pullup	/* Pullup register settings */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin input type
+*
+*  This function sets input type of individual Pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinInputType(uint32_t pin,	/* Pin of type chipcHw_PIN_XXXXX */
+					   chipcHw_PIN_INPUTTYPE_e inputType	/* Pin input type */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Retrieves a string representation of the mux setting for a pin.
+*
+*  @return  Pointer to a character string.
+*/
+/****************************************************************************/
+
+const char *chipcHw_getGpioPinFunctionStr(int pin);
+
+/****************************************************************************/
+/**  @brief issue warmReset
+ */
+/****************************************************************************/
+void chipcHw_reset(uint32_t mask);
+
+/****************************************************************************/
+/**  @brief clock reconfigure
+ */
+/****************************************************************************/
+void chipcHw_clockReconfig(uint32_t busHz, uint32_t armRatio, uint32_t vpmRatio,
+			   uint32_t ddrRatio);
+
+/****************************************************************************/
+/**
+*  @brief   Enable Spread Spectrum
+*
+*  @note chipcHw_Init() must be called earlier
+*/
+/****************************************************************************/
+static inline void chipcHw_enableSpreadSpectrum(void);
+
+/****************************************************************************/
+/**
+*  @brief   Disable Spread Spectrum
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_disableSpreadSpectrum(void);
+
+/****************************************************************************/
+/**  @brief Checks if software strap is enabled
+ *
+ *   @return 1 : When enable
+ *           0 : When disable
+ */
+/****************************************************************************/
+static inline int chipcHw_isSoftwareStrapsEnable(void);
+
+/****************************************************************************/
+/**  @brief Enable software strap
+ */
+/****************************************************************************/
+static inline void chipcHw_softwareStrapsEnable(void);
+
+/****************************************************************************/
+/**  @brief Disable software strap
+ */
+/****************************************************************************/
+static inline void chipcHw_softwareStrapsDisable(void);
+
+/****************************************************************************/
+/**  @brief PLL test enable
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestEnable(void);
+
+/****************************************************************************/
+/**  @brief PLL2 test enable
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestEnable(void);
+
+/****************************************************************************/
+/**  @brief PLL test disable
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestDisable(void);
+
+/****************************************************************************/
+/**  @brief PLL2 test disable
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestDisable(void);
+
+/****************************************************************************/
+/**  @brief Get PLL test status
+ */
+/****************************************************************************/
+static inline int chipcHw_isPllTestEnable(void);
+
+/****************************************************************************/
+/**  @brief Get PLL2 test status
+ */
+/****************************************************************************/
+static inline int chipcHw_isPll2TestEnable(void);
+
+/****************************************************************************/
+/**  @brief PLL test select
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestSelect(uint32_t val);
+
+/****************************************************************************/
+/**  @brief PLL2 test select
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestSelect(uint32_t val);
+
+/****************************************************************************/
+/**  @brief Get PLL test selected option
+ */
+/****************************************************************************/
+static inline uint8_t chipcHw_getPllTestSelected(void);
+
+/****************************************************************************/
+/**  @brief Get PLL2 test selected option
+ */
+/****************************************************************************/
+static inline uint8_t chipcHw_getPll2TestSelected(void);
+
+/****************************************************************************/
+/**
+*  @brief   Enables DDR SW phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrPhaseAlignInterruptEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Disables DDR SW phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrPhaseAlignInterruptDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM SW phase alignment interrupt mode
+*
+*  This function sets VPM phase alignment interrupt
+*
+*/
+/****************************************************************************/
+static inline void
+chipcHw_vpmPhaseAlignInterruptMode(chipcHw_VPM_HW_PHASE_INTR_e mode);
+
+/****************************************************************************/
+/**
+*  @brief   Enable DDR phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrSwPhaseAlignEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Disable DDR phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrSwPhaseAlignDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Enable DDR phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Disable DDR phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Enable VPM phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmSwPhaseAlignEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Disable VPM phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmSwPhaseAlignDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Enable VPM phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Disable VPM phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Set DDR phase alignment margin in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setDdrHwPhaseAlignMargin(chipcHw_DDR_HW_PHASE_MARGIN_e margin	/* Margin alinging DDR  phase */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM phase alignment margin in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setVpmHwPhaseAlignMargin(chipcHw_VPM_HW_PHASE_MARGIN_e margin	/* Margin alinging VPM  phase */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Checks DDR phase aligned status done by HW
+*
+*  @return  1: When aligned
+*           0: When not aligned
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_isDdrHwPhaseAligned(void);
+
+/****************************************************************************/
+/**
+*  @brief   Checks VPM phase aligned status done by HW
+*
+*  @return  1: When aligned
+*           0: When not aligned
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_isVpmHwPhaseAligned(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get DDR phase aligned status done by HW
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getDdrHwPhaseAlignStatus(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get VPM phase aligned status done by HW
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getVpmHwPhaseAlignStatus(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get DDR phase control value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getDdrPhaseControl(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get VPM phase control value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getVpmPhaseControl(void);
+
+/****************************************************************************/
+/**
+*  @brief   DDR phase alignment timeout count
+*
+*  @note    If HW fails to perform the phase alignment, it will trigger
+*           a DDR phase alignment timeout interrupt.
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeout(uint32_t busCycle	/* Timeout in bus cycle */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   VPM phase alignment timeout count
+*
+*  @note    If HW fails to perform the phase alignment, it will trigger
+*           a VPM phase alignment timeout interrupt.
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeout(uint32_t busCycle	/* Timeout in bus cycle */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   DDR phase alignment timeout interrupt enable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   VPM phase alignment timeout interrupt enable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   DDR phase alignment timeout interrupt disable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   VPM phase alignment timeout interrupt disable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Clear DDR phase alignment timeout interrupt
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptClear(void);
+
+/****************************************************************************/
+/**
+*  @brief   Clear VPM phase alignment timeout interrupt
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptClear(void);
+
+/* ---- Private Constants and Types -------------------------------------- */
+
+#endif /* CHIPC_DEF_H */
-- 
cgit v1.2.3


From 4818a4727d787b2da0dc73c66f04d241626f4c97 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:06:13 +0100
Subject: ARM: 5656/1: bcmring: add csp chipc inline functions

add csp chipc inline functions

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 .../mach-bcmring/include/mach/csp/chipcHw_inline.h | 1673 ++++++++++++++++++++
 1 file changed, 1673 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h

(limited to 'arch/arm')

diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h
new file mode 100644
index 00000000000..c78833acb37
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h
@@ -0,0 +1,1673 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CHIPC_INLINE_H
+#define CHIPC_INLINE_H
+
+/* ---- Include Files ----------------------------------------------------- */
+
+#include <csp/errno.h>
+#include <csp/reg.h>
+#include <mach/csp/chipcHw_reg.h>
+#include <mach/csp/chipcHw_def.h>
+
+/* ---- Private Constants and Types --------------------------------------- */
+typedef enum {
+	chipcHw_OPTYPE_BYPASS,	/* Bypass operation */
+	chipcHw_OPTYPE_OUTPUT	/* Output operation */
+} chipcHw_OPTYPE_e;
+
+/* ---- Public Constants and Types ---------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------- */
+/* ---- Public Function Prototypes ---------------------------------------- */
+/* ---- Private Function Prototypes --------------------------------------- */
+static inline void chipcHw_setClock(chipcHw_CLOCK_e clock,
+				    chipcHw_OPTYPE_e type, int mode);
+
+/****************************************************************************/
+/**
+*  @brief   Get Numeric Chip ID
+*
+*  This function returns Chip ID that includes the revison number
+*
+*  @return  Complete numeric Chip ID
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getChipId(void)
+{
+	return pChipcHw->ChipId;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enable Spread Spectrum
+*
+*  @note chipcHw_Init() must be called earlier
+*/
+/****************************************************************************/
+static inline void chipcHw_enableSpreadSpectrum(void)
+{
+	if ((pChipcHw->
+	     PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) !=
+	    chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
+		ddrcReg_PHY_ADDR_CTL_REGP->ssCfg =
+		    (0xFFFF << ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT) |
+		    (ddrcReg_PHY_ADDR_SS_CFG_MIN_CYCLE_PER_TICK <<
+		     ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT);
+		ddrcReg_PHY_ADDR_CTL_REGP->ssCtl |=
+		    ddrcReg_PHY_ADDR_SS_CTRL_ENABLE;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disable Spread Spectrum
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_disableSpreadSpectrum(void)
+{
+	ddrcReg_PHY_ADDR_CTL_REGP->ssCtl &= ~ddrcReg_PHY_ADDR_SS_CTRL_ENABLE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get Chip Product ID
+*
+*  This function returns Chip Product ID
+*
+*  @return  Chip Product ID
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getChipProductId(void)
+{
+	return (pChipcHw->
+		 ChipId & chipcHw_REG_CHIPID_BASE_MASK) >>
+		chipcHw_REG_CHIPID_BASE_SHIFT;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get revision number
+*
+*  This function returns revision number of the chip
+*
+*  @return  Revision number
+*/
+/****************************************************************************/
+static inline chipcHw_REV_NUMBER_e chipcHw_getChipRevisionNumber(void)
+{
+	return pChipcHw->ChipId & chipcHw_REG_CHIPID_REV_MASK;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enables bus interface clock
+*
+*  Enables  bus interface clock of various device
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_BUS_CLOCK_XXXX for mask
+*/
+/****************************************************************************/
+static inline void chipcHw_busInterfaceClockEnable(uint32_t mask)
+{
+	reg32_modify_or(&pChipcHw->BusIntfClock, mask);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disables bus interface clock
+*
+*  Disables  bus interface clock of various device
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_BUS_CLOCK_XXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_busInterfaceClockDisable(uint32_t mask)
+{
+	reg32_modify_and(&pChipcHw->BusIntfClock, ~mask);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get status (enabled/disabled) of bus interface clock
+*
+*  This function returns the status of devices' bus interface clock
+*
+*  @return  Bus interface clock
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getBusInterfaceClockStatus(void)
+{
+	return pChipcHw->BusIntfClock;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enables various audio channels
+*
+*  Enables audio channel
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_audioChannelEnable(uint32_t mask)
+{
+	reg32_modify_or(&pChipcHw->AudioEnable, mask);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disables various audio channels
+*
+*  Disables audio channel
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_audioChannelDisable(uint32_t mask)
+{
+	reg32_modify_and(&pChipcHw->AudioEnable, ~mask);
+}
+
+/****************************************************************************/
+/**
+*  @brief    Soft resets devices
+*
+*  Soft resets various devices
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_SOFT_RESET_XXXXXX defines
+*/
+/****************************************************************************/
+static inline void chipcHw_softReset(uint64_t mask)
+{
+	chipcHw_softResetEnable(mask);
+	chipcHw_softResetDisable(mask);
+}
+
+static inline void chipcHw_softResetDisable(uint64_t mask)
+{
+	uint32_t ctrl1 = (uint32_t) mask;
+	uint32_t ctrl2 = (uint32_t) (mask >> 32);
+
+	/* Deassert module soft reset */
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->SoftReset1 ^= ctrl1;
+	pChipcHw->SoftReset2 ^= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK));
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+static inline void chipcHw_softResetEnable(uint64_t mask)
+{
+	uint32_t ctrl1 = (uint32_t) mask;
+	uint32_t ctrl2 = (uint32_t) (mask >> 32);
+	uint32_t unhold = 0;
+
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->SoftReset1 |= ctrl1;
+	/* Mask out unhold request bits */
+	pChipcHw->SoftReset2 |= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK));
+
+	/* Process unhold requests */
+	if (ctrl2 & chipcHw_REG_SOFT_RESET_VPM_GLOBAL_UNHOLD) {
+		unhold = chipcHw_REG_SOFT_RESET_VPM_GLOBAL_HOLD;
+	}
+
+	if (ctrl2 & chipcHw_REG_SOFT_RESET_VPM_UNHOLD) {
+		unhold |= chipcHw_REG_SOFT_RESET_VPM_HOLD;
+	}
+
+	if (ctrl2 & chipcHw_REG_SOFT_RESET_ARM_UNHOLD) {
+		unhold |= chipcHw_REG_SOFT_RESET_ARM_HOLD;
+	}
+
+	if (unhold) {
+		/* Make sure unhold request is effective */
+		pChipcHw->SoftReset1 &= ~unhold;
+	}
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief    Configures misc CHIP functionality
+*
+*  Configures CHIP functionality
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_MISC_CTRL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_miscControl(uint32_t mask)
+{
+	reg32_write(&pChipcHw->MiscCtrl, mask);
+}
+
+static inline void chipcHw_miscControlDisable(uint32_t mask)
+{
+	reg32_modify_and(&pChipcHw->MiscCtrl, ~mask);
+}
+
+static inline void chipcHw_miscControlEnable(uint32_t mask)
+{
+	reg32_modify_or(&pChipcHw->MiscCtrl, mask);
+}
+
+/****************************************************************************/
+/**
+*  @brief    Set OTP options
+*
+*  Set OTP options
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_OTP_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_setOTPOption(uint64_t mask)
+{
+	uint32_t ctrl1 = (uint32_t) mask;
+	uint32_t ctrl2 = (uint32_t) (mask >> 32);
+
+	reg32_modify_or(&pChipcHw->SoftOTP1, ctrl1);
+	reg32_modify_or(&pChipcHw->SoftOTP2, ctrl2);
+}
+
+/****************************************************************************/
+/**
+*  @brief    Get sticky bits
+*
+*  @return   Sticky bit options of type chipcHw_REG_STICKY_XXXXXX
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getStickyBits(void)
+{
+	return pChipcHw->Sticky;
+}
+
+/****************************************************************************/
+/**
+*  @brief    Set sticky bits
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_STICKY_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_setStickyBits(uint32_t mask)
+{
+	uint32_t bits = 0;
+
+	REG_LOCAL_IRQ_SAVE;
+	if (mask & chipcHw_REG_STICKY_POR_BROM) {
+		bits |= chipcHw_REG_STICKY_POR_BROM;
+	} else {
+		uint32_t sticky;
+		sticky = pChipcHw->Sticky;
+
+		if ((mask & chipcHw_REG_STICKY_BOOT_DONE)
+		    && (sticky & chipcHw_REG_STICKY_BOOT_DONE) == 0) {
+			bits |= chipcHw_REG_STICKY_BOOT_DONE;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_1)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_1) == 0) {
+			bits |= chipcHw_REG_STICKY_GENERAL_1;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_2)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_2) == 0) {
+			bits |= chipcHw_REG_STICKY_GENERAL_2;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_3)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_3) == 0) {
+			bits |= chipcHw_REG_STICKY_GENERAL_3;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_4)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_4) == 0) {
+			bits |= chipcHw_REG_STICKY_GENERAL_4;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_5)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_5) == 0) {
+			bits |= chipcHw_REG_STICKY_GENERAL_5;
+		}
+	}
+	pChipcHw->Sticky = bits;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief    Clear sticky bits
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_STICKY_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_clearStickyBits(uint32_t mask)
+{
+	uint32_t bits = 0;
+
+	REG_LOCAL_IRQ_SAVE;
+	if (mask &
+	    (chipcHw_REG_STICKY_BOOT_DONE | chipcHw_REG_STICKY_GENERAL_1 |
+	     chipcHw_REG_STICKY_GENERAL_2 | chipcHw_REG_STICKY_GENERAL_3 |
+	     chipcHw_REG_STICKY_GENERAL_4 | chipcHw_REG_STICKY_GENERAL_5)) {
+		uint32_t sticky = pChipcHw->Sticky;
+
+		if ((mask & chipcHw_REG_STICKY_BOOT_DONE)
+		    && (sticky & chipcHw_REG_STICKY_BOOT_DONE)) {
+			bits = chipcHw_REG_STICKY_BOOT_DONE;
+			mask &= ~chipcHw_REG_STICKY_BOOT_DONE;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_1)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_1)) {
+			bits |= chipcHw_REG_STICKY_GENERAL_1;
+			mask &= ~chipcHw_REG_STICKY_GENERAL_1;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_2)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_2)) {
+			bits |= chipcHw_REG_STICKY_GENERAL_2;
+			mask &= ~chipcHw_REG_STICKY_GENERAL_2;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_3)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_3)) {
+			bits |= chipcHw_REG_STICKY_GENERAL_3;
+			mask &= ~chipcHw_REG_STICKY_GENERAL_3;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_4)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_4)) {
+			bits |= chipcHw_REG_STICKY_GENERAL_4;
+			mask &= ~chipcHw_REG_STICKY_GENERAL_4;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_5)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_5)) {
+			bits |= chipcHw_REG_STICKY_GENERAL_5;
+			mask &= ~chipcHw_REG_STICKY_GENERAL_5;
+		}
+	}
+	pChipcHw->Sticky = bits | mask;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief    Get software strap value
+*
+*  Retrieves software strap value
+*
+*  @return   Software strap value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getSoftStraps(void)
+{
+	return pChipcHw->SoftStraps;
+}
+
+/****************************************************************************/
+/**
+*  @brief    Set software override strap options
+*
+*  set software override strap options
+*
+*  @return   nothing
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setSoftStraps(uint32_t strapOptions)
+{
+	reg32_write(&pChipcHw->SoftStraps, strapOptions);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get Pin Strap Options
+*
+*  This function returns the raw boot strap options
+*
+*  @return  strap options
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getPinStraps(void)
+{
+	return pChipcHw->PinStraps;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get Valid Strap Options
+*
+*  This function returns the valid raw boot strap options
+*
+*  @return  strap options
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getValidStraps(void)
+{
+	uint32_t softStraps;
+
+	/*
+	 ** Always return the SoftStraps - bootROM calls chipcHw_initValidStraps
+	 ** which copies HW straps to soft straps if there is no override
+	 */
+	softStraps = chipcHw_getSoftStraps();
+
+	return softStraps;
+}
+
+/****************************************************************************/
+/**
+*  @brief    Initialize valid pin strap options
+*
+*  Retrieves valid pin strap options by copying HW strap options to soft register
+*  (if chipcHw_STRAPS_SOFT_OVERRIDE not set)
+*
+*  @return   nothing
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_initValidStraps(void)
+{
+	uint32_t softStraps;
+
+	REG_LOCAL_IRQ_SAVE;
+	softStraps = chipcHw_getSoftStraps();
+
+	if ((softStraps & chipcHw_STRAPS_SOFT_OVERRIDE) == 0) {
+		/* Copy HW straps to software straps */
+		chipcHw_setSoftStraps(chipcHw_getPinStraps());
+	}
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get boot device
+*
+*  This function returns the device type used in booting the system
+*
+*  @return  Boot device of type chipcHw_BOOT_DEVICE
+*
+*/
+/****************************************************************************/
+static inline chipcHw_BOOT_DEVICE_e chipcHw_getBootDevice(void)
+{
+	return chipcHw_getValidStraps() & chipcHw_STRAPS_BOOT_DEVICE_MASK;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get boot mode
+*
+*  This function returns the way the system was booted
+*
+*  @return  Boot mode of type chipcHw_BOOT_MODE
+*
+*/
+/****************************************************************************/
+static inline chipcHw_BOOT_MODE_e chipcHw_getBootMode(void)
+{
+	return chipcHw_getValidStraps() & chipcHw_STRAPS_BOOT_MODE_MASK;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get NAND flash page size
+*
+*  This function returns the NAND device page size
+*
+*  @return  Boot NAND device page size
+*
+*/
+/****************************************************************************/
+static inline chipcHw_NAND_PAGESIZE_e chipcHw_getNandPageSize(void)
+{
+	return chipcHw_getValidStraps() & chipcHw_STRAPS_NAND_PAGESIZE_MASK;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get NAND flash address cycle configuration
+*
+*  This function returns the NAND flash address cycle configuration
+*
+*  @return  0 = Do not extra address cycle, 1 = Add extra cycle
+*
+*/
+/****************************************************************************/
+static inline int chipcHw_getNandExtraCycle(void)
+{
+	if (chipcHw_getValidStraps() & chipcHw_STRAPS_NAND_EXTRA_CYCLE) {
+		return 1;
+	} else {
+		return 0;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Activates PIF interface
+*
+*  This function activates PIF interface by taking control of LCD pins
+*
+*  @note
+*       When activated, LCD pins will be defined as follows for PIF operation
+*
+*       CLD[17:0]  = pif_data[17:0]
+*       CLD[23:18] = pif_address[5:0]
+*       CLPOWER    = pif_wr_str
+*       CLCP       = pif_rd_str
+*       CLAC       = pif_hat1
+*       CLFP       = pif_hrdy1
+*       CLLP       = pif_hat2
+*       GPIO[42]   = pif_hrdy2
+*
+*       In PIF mode, "pif_hrdy2" overrides other shared function for GPIO[42] pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_activatePifInterface(void)
+{
+	reg32_write(&pChipcHw->LcdPifMode, chipcHw_REG_PIF_PIN_ENABLE);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Activates LCD interface
+*
+*  This function activates LCD interface
+*
+*  @note
+*       When activated, LCD pins will be defined as follows
+*
+*       CLD[17:0]  = LCD data
+*       CLD[23:18] = LCD data
+*       CLPOWER    = LCD power
+*       CLCP       =
+*       CLAC       = LCD ack
+*       CLFP       =
+*       CLLP       =
+*/
+/****************************************************************************/
+static inline void chipcHw_activateLcdInterface(void)
+{
+	reg32_write(&pChipcHw->LcdPifMode, chipcHw_REG_LCD_PIN_ENABLE);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Deactivates PIF/LCD interface
+*
+*  This function deactivates PIF/LCD interface
+*
+*  @note
+*       When deactivated LCD pins will be in rti-stated
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_deactivatePifLcdInterface(void)
+{
+	reg32_write(&pChipcHw->LcdPifMode, 0);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Select GE2
+*
+*  This function select GE2 as the graphic engine
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_selectGE2(void)
+{
+	reg32_modify_and(&pChipcHw->MiscCtrl, ~chipcHw_REG_MISC_CTRL_GE_SEL);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Select GE3
+*
+*  This function select GE3 as the graphic engine
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_selectGE3(void)
+{
+	reg32_modify_or(&pChipcHw->MiscCtrl, chipcHw_REG_MISC_CTRL_GE_SEL);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get to know the configuration of GPIO pin
+*
+*/
+/****************************************************************************/
+static inline chipcHw_GPIO_FUNCTION_e chipcHw_getGpioPinFunction(int pin)
+{
+	return (*((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) &
+		(chipcHw_REG_GPIO_MUX_MASK <<
+		 chipcHw_REG_GPIO_MUX_POSITION(pin))) >>
+	    chipcHw_REG_GPIO_MUX_POSITION(pin);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Configure GPIO pin function
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setGpioPinFunction(int pin,
+					      chipcHw_GPIO_FUNCTION_e func)
+{
+	REG_LOCAL_IRQ_SAVE;
+	*((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) &=
+	    ~(chipcHw_REG_GPIO_MUX_MASK << chipcHw_REG_GPIO_MUX_POSITION(pin));
+	*((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) |=
+	    func << chipcHw_REG_GPIO_MUX_POSITION(pin);
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin slew rate
+*
+*  This function sets the slew of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinSlewRate(uint32_t pin,
+					  chipcHw_PIN_SLEW_RATE_e slewRate)
+{
+	REG_LOCAL_IRQ_SAVE;
+	*((uint32_t *) chipcHw_REG_SLEW_RATE(pin)) &=
+	    ~(chipcHw_REG_SLEW_RATE_MASK <<
+	      chipcHw_REG_SLEW_RATE_POSITION(pin));
+	*((uint32_t *) chipcHw_REG_SLEW_RATE(pin)) |=
+	    (uint32_t) slewRate << chipcHw_REG_SLEW_RATE_POSITION(pin);
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin output drive current
+*
+*  This function sets output drive current of individual pin
+*
+*  Note: Avoid the use of the word 'current' since linux headers define this
+*        to be the current task.
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinOutputCurrent(uint32_t pin,
+					       chipcHw_PIN_CURRENT_STRENGTH_e
+					       curr)
+{
+	REG_LOCAL_IRQ_SAVE;
+	*((uint32_t *) chipcHw_REG_CURRENT(pin)) &=
+	    ~(chipcHw_REG_CURRENT_MASK << chipcHw_REG_CURRENT_POSITION(pin));
+	*((uint32_t *) chipcHw_REG_CURRENT(pin)) |=
+	    (uint32_t) curr << chipcHw_REG_CURRENT_POSITION(pin);
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin pullup register
+*
+*  This function sets pullup register of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinPullup(uint32_t pin, chipcHw_PIN_PULL_e pullup)
+{
+	REG_LOCAL_IRQ_SAVE;
+	*((uint32_t *) chipcHw_REG_PULLUP(pin)) &=
+	    ~(chipcHw_REG_PULLUP_MASK << chipcHw_REG_PULLUP_POSITION(pin));
+	*((uint32_t *) chipcHw_REG_PULLUP(pin)) |=
+	    (uint32_t) pullup << chipcHw_REG_PULLUP_POSITION(pin);
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin input type
+*
+*  This function sets input type of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinInputType(uint32_t pin,
+					   chipcHw_PIN_INPUTTYPE_e inputType)
+{
+	REG_LOCAL_IRQ_SAVE;
+	*((uint32_t *) chipcHw_REG_INPUTTYPE(pin)) &=
+	    ~(chipcHw_REG_INPUTTYPE_MASK <<
+	      chipcHw_REG_INPUTTYPE_POSITION(pin));
+	*((uint32_t *) chipcHw_REG_INPUTTYPE(pin)) |=
+	    (uint32_t) inputType << chipcHw_REG_INPUTTYPE_POSITION(pin);
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Power up the USB PHY
+*
+*  This function powers up the USB PHY
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_powerUpUsbPhy(void)
+{
+	reg32_modify_and(&pChipcHw->MiscCtrl,
+			 chipcHw_REG_MISC_CTRL_USB_POWERON);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Power down the USB PHY
+*
+*  This function powers down the USB PHY
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_powerDownUsbPhy(void)
+{
+	reg32_modify_or(&pChipcHw->MiscCtrl,
+			chipcHw_REG_MISC_CTRL_USB_POWEROFF);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set the 2nd USB as host
+*
+*  This function sets the 2nd USB as host
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setUsbHost(void)
+{
+	reg32_modify_or(&pChipcHw->MiscCtrl,
+			chipcHw_REG_MISC_CTRL_USB_MODE_HOST);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set the 2nd USB as device
+*
+*  This function sets the 2nd USB as device
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setUsbDevice(void)
+{
+	reg32_modify_and(&pChipcHw->MiscCtrl,
+			 chipcHw_REG_MISC_CTRL_USB_MODE_DEVICE);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Lower layer funtion to enable/disable a clock of a certain device
+*
+*  This function enables/disables a core clock
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setClock(chipcHw_CLOCK_e clock,
+				    chipcHw_OPTYPE_e type, int mode)
+{
+	volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
+	volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
+
+	switch (clock) {
+	case chipcHw_CLOCK_DDR:
+		pPLLReg = &pChipcHw->DDRClock;
+		break;
+	case chipcHw_CLOCK_ARM:
+		pPLLReg = &pChipcHw->ARMClock;
+		break;
+	case chipcHw_CLOCK_ESW:
+		pPLLReg = &pChipcHw->ESWClock;
+		break;
+	case chipcHw_CLOCK_VPM:
+		pPLLReg = &pChipcHw->VPMClock;
+		break;
+	case chipcHw_CLOCK_ESW125:
+		pPLLReg = &pChipcHw->ESW125Clock;
+		break;
+	case chipcHw_CLOCK_UART:
+		pPLLReg = &pChipcHw->UARTClock;
+		break;
+	case chipcHw_CLOCK_SDIO0:
+		pPLLReg = &pChipcHw->SDIO0Clock;
+		break;
+	case chipcHw_CLOCK_SDIO1:
+		pPLLReg = &pChipcHw->SDIO1Clock;
+		break;
+	case chipcHw_CLOCK_SPI:
+		pPLLReg = &pChipcHw->SPIClock;
+		break;
+	case chipcHw_CLOCK_ETM:
+		pPLLReg = &pChipcHw->ETMClock;
+		break;
+	case chipcHw_CLOCK_USB:
+		pPLLReg = &pChipcHw->USBClock;
+		if (type == chipcHw_OPTYPE_OUTPUT) {
+			if (mode) {
+				reg32_modify_and(pPLLReg,
+						 ~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+			} else {
+				reg32_modify_or(pPLLReg,
+						chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+			}
+		}
+		break;
+	case chipcHw_CLOCK_LCD:
+		pPLLReg = &pChipcHw->LCDClock;
+		if (type == chipcHw_OPTYPE_OUTPUT) {
+			if (mode) {
+				reg32_modify_and(pPLLReg,
+						 ~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+			} else {
+				reg32_modify_or(pPLLReg,
+						chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+			}
+		}
+		break;
+	case chipcHw_CLOCK_APM:
+		pPLLReg = &pChipcHw->APMClock;
+		if (type == chipcHw_OPTYPE_OUTPUT) {
+			if (mode) {
+				reg32_modify_and(pPLLReg,
+						 ~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+			} else {
+				reg32_modify_or(pPLLReg,
+						chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+			}
+		}
+		break;
+	case chipcHw_CLOCK_BUS:
+		pClockCtrl = &pChipcHw->ACLKClock;
+		break;
+	case chipcHw_CLOCK_OTP:
+		pClockCtrl = &pChipcHw->OTPClock;
+		break;
+	case chipcHw_CLOCK_I2C:
+		pClockCtrl = &pChipcHw->I2CClock;
+		break;
+	case chipcHw_CLOCK_I2S0:
+		pClockCtrl = &pChipcHw->I2S0Clock;
+		break;
+	case chipcHw_CLOCK_RTBUS:
+		pClockCtrl = &pChipcHw->RTBUSClock;
+		break;
+	case chipcHw_CLOCK_APM100:
+		pClockCtrl = &pChipcHw->APM100Clock;
+		break;
+	case chipcHw_CLOCK_TSC:
+		pClockCtrl = &pChipcHw->TSCClock;
+		break;
+	case chipcHw_CLOCK_LED:
+		pClockCtrl = &pChipcHw->LEDClock;
+		break;
+	case chipcHw_CLOCK_I2S1:
+		pClockCtrl = &pChipcHw->I2S1Clock;
+		break;
+	}
+
+	if (pPLLReg) {
+		switch (type) {
+		case chipcHw_OPTYPE_OUTPUT:
+			/* PLL clock output enable/disable */
+			if (mode) {
+				if (clock == chipcHw_CLOCK_DDR) {
+					/* DDR clock enable is inverted */
+					reg32_modify_and(pPLLReg,
+							 ~chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
+				} else {
+					reg32_modify_or(pPLLReg,
+							chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
+				}
+			} else {
+				if (clock == chipcHw_CLOCK_DDR) {
+					/* DDR clock disable is inverted */
+					reg32_modify_or(pPLLReg,
+							chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
+				} else {
+					reg32_modify_and(pPLLReg,
+							 ~chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
+				}
+			}
+			break;
+		case chipcHw_OPTYPE_BYPASS:
+			/* PLL clock bypass enable/disable */
+			if (mode) {
+				reg32_modify_or(pPLLReg,
+						chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
+			} else {
+				reg32_modify_and(pPLLReg,
+						 ~chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
+			}
+			break;
+		}
+	} else if (pClockCtrl) {
+		switch (type) {
+		case chipcHw_OPTYPE_OUTPUT:
+			if (mode) {
+				reg32_modify_or(pClockCtrl,
+						chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE);
+			} else {
+				reg32_modify_and(pClockCtrl,
+						 ~chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE);
+			}
+			break;
+		case chipcHw_OPTYPE_BYPASS:
+			if (mode) {
+				reg32_modify_or(pClockCtrl,
+						chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
+			} else {
+				reg32_modify_and(pClockCtrl,
+						 ~chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
+			}
+			break;
+		}
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disables a core clock of a certain device
+*
+*  This function disables a core clock
+*
+*  @note    no change in power consumption
+*/
+/****************************************************************************/
+static inline void chipcHw_setClockDisable(chipcHw_CLOCK_e clock)
+{
+
+	/* Disable output of the clock */
+	chipcHw_setClock(clock, chipcHw_OPTYPE_OUTPUT, 0);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enable a core clock of a certain device
+*
+*  This function enables a core clock
+*
+*  @note    no change in power consumption
+*/
+/****************************************************************************/
+static inline void chipcHw_setClockEnable(chipcHw_CLOCK_e clock)
+{
+
+	/* Enable output of the clock */
+	chipcHw_setClock(clock, chipcHw_OPTYPE_OUTPUT, 1);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enables bypass clock of a certain device
+*
+*  This function enables bypass clock
+*
+*  @note    Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_bypassClockEnable(chipcHw_CLOCK_e clock)
+{
+	/* Enable bypass clock */
+	chipcHw_setClock(clock, chipcHw_OPTYPE_BYPASS, 1);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disabled bypass clock of a certain device
+*
+*  This function disables bypass clock
+*
+*  @note    Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_bypassClockDisable(chipcHw_CLOCK_e clock)
+{
+	/* Disable bypass clock */
+	chipcHw_setClock(clock, chipcHw_OPTYPE_BYPASS, 0);
+
+}
+
+/****************************************************************************/
+/**  @brief Checks if software strap is enabled
+ *
+ *   @return 1 : When enable
+ *           0 : When disable
+ */
+/****************************************************************************/
+static inline int chipcHw_isSoftwareStrapsEnable(void)
+{
+	return pChipcHw->SoftStraps & 0x00000001;
+}
+
+/****************************************************************************/
+/**  @brief Enable software strap
+ */
+/****************************************************************************/
+static inline void chipcHw_softwareStrapsEnable(void)
+{
+	reg32_modify_or(&pChipcHw->SoftStraps, 0x00000001);
+}
+
+/****************************************************************************/
+/**  @brief Disable software strap
+ */
+/****************************************************************************/
+static inline void chipcHw_softwareStrapsDisable(void)
+{
+	reg32_modify_and(&pChipcHw->SoftStraps, (~0x00000001));
+}
+
+/****************************************************************************/
+/**  @brief PLL test enable
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestEnable(void)
+{
+	reg32_modify_or(&pChipcHw->PLLConfig,
+			chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
+}
+
+/****************************************************************************/
+/**  @brief PLL2 test enable
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestEnable(void)
+{
+	reg32_modify_or(&pChipcHw->PLLConfig2,
+			chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
+}
+
+/****************************************************************************/
+/**  @brief PLL test disable
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestDisable(void)
+{
+	reg32_modify_and(&pChipcHw->PLLConfig,
+			 ~chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
+}
+
+/****************************************************************************/
+/**  @brief PLL2 test disable
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestDisable(void)
+{
+	reg32_modify_and(&pChipcHw->PLLConfig2,
+			 ~chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
+}
+
+/****************************************************************************/
+/**  @brief Get PLL test status
+ */
+/****************************************************************************/
+static inline int chipcHw_isPllTestEnable(void)
+{
+	return pChipcHw->PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_ENABLE;
+}
+
+/****************************************************************************/
+/**  @brief Get PLL2 test status
+ */
+/****************************************************************************/
+static inline int chipcHw_isPll2TestEnable(void)
+{
+	return pChipcHw->PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_ENABLE;
+}
+
+/****************************************************************************/
+/**  @brief PLL test select
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestSelect(uint32_t val)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->PLLConfig &= ~chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK;
+	pChipcHw->PLLConfig |=
+	    (val) << chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**  @brief PLL2 test select
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestSelect(uint32_t val)
+{
+
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->PLLConfig2 &= ~chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK;
+	pChipcHw->PLLConfig2 |=
+	    (val) << chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**  @brief Get PLL test selected option
+ */
+/****************************************************************************/
+static inline uint8_t chipcHw_getPllTestSelected(void)
+{
+	return (uint8_t) ((pChipcHw->
+			   PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK)
+			  >> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT);
+}
+
+/****************************************************************************/
+/**  @brief Get PLL2 test selected option
+ */
+/****************************************************************************/
+static inline uint8_t chipcHw_getPll2TestSelected(void)
+{
+	return (uint8_t) ((pChipcHw->
+			   PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK)
+			  >> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT);
+}
+
+/****************************************************************************/
+/**
+*  @brief  Disable the PLL1
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_pll1Disable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->PLLConfig |= chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief  Disable the PLL2
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_pll2Disable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->PLLConfig2 |= chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enables DDR SW phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrPhaseAlignInterruptEnable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->Spare1 |= chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disables DDR SW phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrPhaseAlignInterruptDisable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM SW phase alignment interrupt mode
+*
+*  This function sets VPM phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void
+chipcHw_vpmPhaseAlignInterruptMode(chipcHw_VPM_HW_PHASE_INTR_e mode)
+{
+	REG_LOCAL_IRQ_SAVE;
+	if (mode == chipcHw_VPM_HW_PHASE_INTR_DISABLE) {
+		pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE;
+	} else {
+		pChipcHw->Spare1 |= chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE;
+	}
+	pChipcHw->VPMPhaseCtrl2 =
+	    (pChipcHw->
+	     VPMPhaseCtrl2 & ~(chipcHw_REG_VPM_INTR_SELECT_MASK <<
+			       chipcHw_REG_VPM_INTR_SELECT_SHIFT)) | mode;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enable DDR phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrSwPhaseAlignEnable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->DDRPhaseCtrl1 |= chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disable DDR phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrSwPhaseAlignDisable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->DDRPhaseCtrl1 &= ~chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enable DDR phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignEnable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->DDRPhaseCtrl1 |= chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disable DDR phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignDisable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->DDRPhaseCtrl1 &= ~chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enable VPM phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmSwPhaseAlignEnable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->VPMPhaseCtrl1 |= chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disable VPM phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmSwPhaseAlignDisable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->VPMPhaseCtrl1 &= ~chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enable VPM phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignEnable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->VPMPhaseCtrl1 |= chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disable VPM phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignDisable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->VPMPhaseCtrl1 &= ~chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set DDR phase alignment margin in hardware
+*
+*/
+/****************************************************************************/
+static inline void
+chipcHw_setDdrHwPhaseAlignMargin(chipcHw_DDR_HW_PHASE_MARGIN_e margin)
+{
+	uint32_t ge = 0;
+	uint32_t le = 0;
+
+	switch (margin) {
+	case chipcHw_DDR_HW_PHASE_MARGIN_STRICT:
+		ge = 0x0F;
+		le = 0x0F;
+		break;
+	case chipcHw_DDR_HW_PHASE_MARGIN_MEDIUM:
+		ge = 0x03;
+		le = 0x3F;
+		break;
+	case chipcHw_DDR_HW_PHASE_MARGIN_WIDE:
+		ge = 0x01;
+		le = 0x7F;
+		break;
+	}
+
+	{
+		REG_LOCAL_IRQ_SAVE;
+
+		pChipcHw->DDRPhaseCtrl1 &=
+		    ~((chipcHw_REG_DDR_PHASE_VALUE_GE_MASK <<
+		       chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT)
+		      || (chipcHw_REG_DDR_PHASE_VALUE_LE_MASK <<
+			  chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT));
+
+		pChipcHw->DDRPhaseCtrl1 |=
+		    ((ge << chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT)
+		     || (le << chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT));
+
+		REG_LOCAL_IRQ_RESTORE;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM phase alignment margin in hardware
+*
+*/
+/****************************************************************************/
+static inline void
+chipcHw_setVpmHwPhaseAlignMargin(chipcHw_VPM_HW_PHASE_MARGIN_e margin)
+{
+	uint32_t ge = 0;
+	uint32_t le = 0;
+
+	switch (margin) {
+	case chipcHw_VPM_HW_PHASE_MARGIN_STRICT:
+		ge = 0x0F;
+		le = 0x0F;
+		break;
+	case chipcHw_VPM_HW_PHASE_MARGIN_MEDIUM:
+		ge = 0x03;
+		le = 0x3F;
+		break;
+	case chipcHw_VPM_HW_PHASE_MARGIN_WIDE:
+		ge = 0x01;
+		le = 0x7F;
+		break;
+	}
+
+	{
+		REG_LOCAL_IRQ_SAVE;
+
+		pChipcHw->VPMPhaseCtrl1 &=
+		    ~((chipcHw_REG_VPM_PHASE_VALUE_GE_MASK <<
+		       chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT)
+		      || (chipcHw_REG_VPM_PHASE_VALUE_LE_MASK <<
+			  chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT));
+
+		pChipcHw->VPMPhaseCtrl1 |=
+		    ((ge << chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT)
+		     || (le << chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT));
+
+		REG_LOCAL_IRQ_RESTORE;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Checks DDR phase aligned status done by HW
+*
+*  @return  1: When aligned
+*           0: When not aligned
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_isDdrHwPhaseAligned(void)
+{
+	return (pChipcHw->
+		PhaseAlignStatus & chipcHw_REG_DDR_PHASE_ALIGNED) ? 1 : 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Checks VPM phase aligned status done by HW
+*
+*  @return  1: When aligned
+*           0: When not aligned
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_isVpmHwPhaseAligned(void)
+{
+	return (pChipcHw->
+		PhaseAlignStatus & chipcHw_REG_VPM_PHASE_ALIGNED) ? 1 : 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get DDR phase aligned status done by HW
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getDdrHwPhaseAlignStatus(void)
+{
+	return (pChipcHw->
+		PhaseAlignStatus & chipcHw_REG_DDR_PHASE_STATUS_MASK) >>
+	    chipcHw_REG_DDR_PHASE_STATUS_SHIFT;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get VPM phase aligned status done by HW
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getVpmHwPhaseAlignStatus(void)
+{
+	return (pChipcHw->
+		PhaseAlignStatus & chipcHw_REG_VPM_PHASE_STATUS_MASK) >>
+	    chipcHw_REG_VPM_PHASE_STATUS_SHIFT;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get DDR phase control value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getDdrPhaseControl(void)
+{
+	return (pChipcHw->
+		PhaseAlignStatus & chipcHw_REG_DDR_PHASE_CTRL_MASK) >>
+	    chipcHw_REG_DDR_PHASE_CTRL_SHIFT;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get VPM phase control value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getVpmPhaseControl(void)
+{
+	return (pChipcHw->
+		PhaseAlignStatus & chipcHw_REG_VPM_PHASE_CTRL_MASK) >>
+	    chipcHw_REG_VPM_PHASE_CTRL_SHIFT;
+}
+
+/****************************************************************************/
+/**
+*  @brief   DDR phase alignment timeout count
+*
+*  @note    If HW fails to perform the phase alignment, it will trigger
+*           a DDR phase alignment timeout interrupt.
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeout(uint32_t busCycle)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->DDRPhaseCtrl2 &=
+	    ~(chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK <<
+	      chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT);
+	pChipcHw->DDRPhaseCtrl2 |=
+	    (busCycle & chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK) <<
+	    chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   VPM phase alignment timeout count
+*
+*  @note    If HW fails to perform the phase alignment, it will trigger
+*           a VPM phase alignment timeout interrupt.
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeout(uint32_t busCycle)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->VPMPhaseCtrl2 &=
+	    ~(chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK <<
+	      chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT);
+	pChipcHw->VPMPhaseCtrl2 |=
+	    (busCycle & chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK) <<
+	    chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Clear DDR phase alignment timeout interrupt
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptClear(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	/* Clear timeout interrupt service bit */
+	pChipcHw->DDRPhaseCtrl2 |= chipcHw_REG_DDR_INTR_SERVICED;
+	pChipcHw->DDRPhaseCtrl2 &= ~chipcHw_REG_DDR_INTR_SERVICED;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Clear VPM phase alignment timeout interrupt
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptClear(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	/* Clear timeout interrupt service bit */
+	pChipcHw->VPMPhaseCtrl2 |= chipcHw_REG_VPM_INTR_SERVICED;
+	pChipcHw->VPMPhaseCtrl2 &= ~chipcHw_REG_VPM_INTR_SERVICED;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   DDR phase alignment timeout interrupt enable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptEnable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	chipcHw_ddrHwPhaseAlignTimeoutInterruptClear();	/* Recommended */
+	/* Enable timeout interrupt */
+	pChipcHw->DDRPhaseCtrl2 |= chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   VPM phase alignment timeout interrupt enable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptEnable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	chipcHw_vpmHwPhaseAlignTimeoutInterruptClear();	/* Recommended */
+	/* Enable timeout interrupt */
+	pChipcHw->VPMPhaseCtrl2 |= chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   DDR phase alignment timeout interrupt disable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptDisable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->DDRPhaseCtrl2 &= ~chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   VPM phase alignment timeout interrupt disable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptDisable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->VPMPhaseCtrl2 &= ~chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+#endif /* CHIPC_INLINE_H */
-- 
cgit v1.2.3


From 638ee2db1916de4da144f0ed6d156181ede20a41 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:06:47 +0100
Subject: ARM: 5657/1: bcmring: add csp chipc block source code

add csp chipc block source code

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/csp/chipc/Makefile        |   1 +
 arch/arm/mach-bcmring/csp/chipc/chipcHw.c       | 776 ++++++++++++++++++++++++
 arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c  | 293 +++++++++
 arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c | 124 ++++
 arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c   |  64 ++
 5 files changed, 1258 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/csp/chipc/Makefile
 create mode 100644 arch/arm/mach-bcmring/csp/chipc/chipcHw.c
 create mode 100644 arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c
 create mode 100644 arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c
 create mode 100644 arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c

(limited to 'arch/arm')

diff --git a/arch/arm/mach-bcmring/csp/chipc/Makefile b/arch/arm/mach-bcmring/csp/chipc/Makefile
new file mode 100644
index 00000000000..673952768ee
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/Makefile
@@ -0,0 +1 @@
+obj-y += chipcHw.o chipcHw_str.o chipcHw_reset.o chipcHw_init.o
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
new file mode 100644
index 00000000000..b3a61d860c6
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
@@ -0,0 +1,776 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    chipcHw.c
+*
+*  @brief   Low level Various CHIP clock controlling routines
+*
+*  @note
+*
+*   These routines provide basic clock controlling functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/errno.h>
+#include <csp/stdint.h>
+#include <csp/module.h>
+
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+
+#include <csp/reg.h>
+#include <csp/delay.h>
+
+/* ---- Private Constants and Types --------------------------------------- */
+
+/* VPM alignment algorithm uses this */
+#define MAX_PHASE_ADJUST_COUNT         0xFFFF	/* Max number of times allowed to adjust the phase */
+#define MAX_PHASE_ALIGN_ATTEMPTS       10	/* Max number of attempt to align the phase */
+
+/* Local definition of clock type */
+#define PLL_CLOCK                      1	/* PLL Clock */
+#define NON_PLL_CLOCK                  2	/* Divider clock */
+
+static int chipcHw_divide(int num, int denom)
+    __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Set clock fequency for miscellaneous configurable clocks
+*
+*  This function sets clock frequency
+*
+*  @return  Configured clock frequency in hertz
+*
+*/
+/****************************************************************************/
+chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
+    ) {
+	volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
+	volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
+	volatile uint32_t *pDependentClock = (uint32_t *) 0x0;
+	uint32_t vcoFreqPll1Hz = 0;	/* Effective VCO frequency for PLL1 in Hz */
+	uint32_t vcoFreqPll2Hz = 0;	/* Effective VCO frequency for PLL2 in Hz */
+	uint32_t dependentClockType = 0;
+	uint32_t vcoHz = 0;
+
+	/* Get VCO frequencies */
+	if ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
+		uint64_t adjustFreq = 0;
+
+		vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+		    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+		    ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+
+		/* Adjusted frequency due to chipcHw_REG_PLL_DIVIDER_NDIV_f_SS */
+		adjustFreq = (uint64_t) chipcHw_XTAL_FREQ_Hz *
+			(uint64_t) chipcHw_REG_PLL_DIVIDER_NDIV_f_SS *
+			chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, (chipcHw_REG_PLL_PREDIVIDER_P2 * (uint64_t) chipcHw_REG_PLL_DIVIDER_FRAC));
+		vcoFreqPll1Hz += (uint32_t) adjustFreq;
+	} else {
+		vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+		    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+		    ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+	}
+	vcoFreqPll2Hz =
+	    chipcHw_XTAL_FREQ_Hz *
+		 chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+	    ((pChipcHw->PLLPreDivider2 & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+	     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+
+	switch (clock) {
+	case chipcHw_CLOCK_DDR:
+		pPLLReg = &pChipcHw->DDRClock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_ARM:
+		pPLLReg = &pChipcHw->ARMClock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_ESW:
+		pPLLReg = &pChipcHw->ESWClock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_VPM:
+		pPLLReg = &pChipcHw->VPMClock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_ESW125:
+		pPLLReg = &pChipcHw->ESW125Clock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_UART:
+		pPLLReg = &pChipcHw->UARTClock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_SDIO0:
+		pPLLReg = &pChipcHw->SDIO0Clock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_SDIO1:
+		pPLLReg = &pChipcHw->SDIO1Clock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_SPI:
+		pPLLReg = &pChipcHw->SPIClock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_ETM:
+		pPLLReg = &pChipcHw->ETMClock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_USB:
+		pPLLReg = &pChipcHw->USBClock;
+		vcoHz = vcoFreqPll2Hz;
+		break;
+	case chipcHw_CLOCK_LCD:
+		pPLLReg = &pChipcHw->LCDClock;
+		vcoHz = vcoFreqPll2Hz;
+		break;
+	case chipcHw_CLOCK_APM:
+		pPLLReg = &pChipcHw->APMClock;
+		vcoHz = vcoFreqPll2Hz;
+		break;
+	case chipcHw_CLOCK_BUS:
+		pClockCtrl = &pChipcHw->ACLKClock;
+		pDependentClock = &pChipcHw->ARMClock;
+		vcoHz = vcoFreqPll1Hz;
+		dependentClockType = PLL_CLOCK;
+		break;
+	case chipcHw_CLOCK_OTP:
+		pClockCtrl = &pChipcHw->OTPClock;
+		break;
+	case chipcHw_CLOCK_I2C:
+		pClockCtrl = &pChipcHw->I2CClock;
+		break;
+	case chipcHw_CLOCK_I2S0:
+		pClockCtrl = &pChipcHw->I2S0Clock;
+		break;
+	case chipcHw_CLOCK_RTBUS:
+		pClockCtrl = &pChipcHw->RTBUSClock;
+		pDependentClock = &pChipcHw->ACLKClock;
+		dependentClockType = NON_PLL_CLOCK;
+		break;
+	case chipcHw_CLOCK_APM100:
+		pClockCtrl = &pChipcHw->APM100Clock;
+		pDependentClock = &pChipcHw->APMClock;
+		vcoHz = vcoFreqPll2Hz;
+		dependentClockType = PLL_CLOCK;
+		break;
+	case chipcHw_CLOCK_TSC:
+		pClockCtrl = &pChipcHw->TSCClock;
+		break;
+	case chipcHw_CLOCK_LED:
+		pClockCtrl = &pChipcHw->LEDClock;
+		break;
+	case chipcHw_CLOCK_I2S1:
+		pClockCtrl = &pChipcHw->I2S1Clock;
+		break;
+	}
+
+	if (pPLLReg) {
+		/* Obtain PLL clock frequency */
+		if (*pPLLReg & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) {
+			/* Return crystal clock frequency when bypassed */
+			return chipcHw_XTAL_FREQ_Hz;
+		} else if (clock == chipcHw_CLOCK_DDR) {
+			/* DDR frequency is configured in PLLDivider register */
+			return chipcHw_divide (vcoHz, (((pChipcHw->PLLDivider & 0xFF000000) >> 24) ? ((pChipcHw->PLLDivider & 0xFF000000) >> 24) : 256));
+		} else {
+			/* From chip revision number B0, LCD clock is internally divided by 2 */
+			if ((pPLLReg == &pChipcHw->LCDClock) && (chipcHw_getChipRevisionNumber() != chipcHw_REV_NUMBER_A0)) {
+				vcoHz >>= 1;
+			}
+			/* Obtain PLL clock frequency using VCO dividers */
+			return chipcHw_divide(vcoHz, ((*pPLLReg & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (*pPLLReg & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256));
+		}
+	} else if (pClockCtrl) {
+		/* Obtain divider clock frequency */
+		uint32_t div;
+		uint32_t freq = 0;
+
+		if (*pClockCtrl & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) {
+			/* Return crystal clock frequency when bypassed */
+			return chipcHw_XTAL_FREQ_Hz;
+		} else if (pDependentClock) {
+			/* Identify the dependent clock frequency */
+			switch (dependentClockType) {
+			case PLL_CLOCK:
+				if (*pDependentClock & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) {
+					/* Use crystal clock frequency when dependent PLL clock is bypassed */
+					freq = chipcHw_XTAL_FREQ_Hz;
+				} else {
+					/* Obtain PLL clock frequency using VCO dividers */
+					div = *pDependentClock & chipcHw_REG_PLL_CLOCK_MDIV_MASK;
+					freq = div ? chipcHw_divide(vcoHz, div) : 0;
+				}
+				break;
+			case NON_PLL_CLOCK:
+				if (pDependentClock == (uint32_t *) &pChipcHw->ACLKClock) {
+					freq = chipcHw_getClockFrequency (chipcHw_CLOCK_BUS);
+				} else {
+					if (*pDependentClock & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) {
+						/* Use crystal clock frequency when dependent divider clock is bypassed */
+						freq = chipcHw_XTAL_FREQ_Hz;
+					} else {
+						/* Obtain divider clock frequency using XTAL dividers */
+						div = *pDependentClock & chipcHw_REG_DIV_CLOCK_DIV_MASK;
+						freq = chipcHw_divide (chipcHw_XTAL_FREQ_Hz, (div ? div : 256));
+					}
+				}
+				break;
+			}
+		} else {
+			/* Dependent on crystal clock */
+			freq = chipcHw_XTAL_FREQ_Hz;
+		}
+
+		div = *pClockCtrl & chipcHw_REG_DIV_CLOCK_DIV_MASK;
+		return chipcHw_divide(freq, (div ? div : 256));
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set clock fequency for miscellaneous configurable clocks
+*
+*  This function sets clock frequency
+*
+*  @return  Configured clock frequency in Hz
+*
+*/
+/****************************************************************************/
+chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock,	/*  [ IN ] Configurable clock */
+				       uint32_t freq	/*  [ IN ] Clock frequency in Hz */
+    ) {
+	volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
+	volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
+	volatile uint32_t *pDependentClock = (uint32_t *) 0x0;
+	uint32_t vcoFreqPll1Hz = 0;	/* Effective VCO frequency for PLL1 in Hz */
+	uint32_t desVcoFreqPll1Hz = 0;	/* Desired VCO frequency for PLL1 in Hz */
+	uint32_t vcoFreqPll2Hz = 0;	/* Effective VCO frequency for PLL2 in Hz */
+	uint32_t dependentClockType = 0;
+	uint32_t vcoHz = 0;
+	uint32_t desVcoHz = 0;
+
+	/* Get VCO frequencies */
+	if ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
+		uint64_t adjustFreq = 0;
+
+		vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+		    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+		    ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+
+		/* Adjusted frequency due to chipcHw_REG_PLL_DIVIDER_NDIV_f_SS */
+		adjustFreq = (uint64_t) chipcHw_XTAL_FREQ_Hz *
+			(uint64_t) chipcHw_REG_PLL_DIVIDER_NDIV_f_SS *
+			chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, (chipcHw_REG_PLL_PREDIVIDER_P2 * (uint64_t) chipcHw_REG_PLL_DIVIDER_FRAC));
+		vcoFreqPll1Hz += (uint32_t) adjustFreq;
+
+		/* Desired VCO frequency */
+		desVcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+		    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+		    (((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+		      chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) + 1);
+	} else {
+		vcoFreqPll1Hz = desVcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+		    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+		    ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+	}
+	vcoFreqPll2Hz = chipcHw_XTAL_FREQ_Hz * chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+	    ((pChipcHw->PLLPreDivider2 & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+	     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+
+	switch (clock) {
+	case chipcHw_CLOCK_DDR:
+		/* Configure the DDR_ctrl:BUS ratio settings */
+		{
+			REG_LOCAL_IRQ_SAVE;
+			/* Dvide DDR_phy by two to obtain DDR_ctrl clock */
+			pChipcHw->DDRClock = (pChipcHw->DDRClock & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((((freq / 2) / chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1)
+				<< chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT);
+			REG_LOCAL_IRQ_RESTORE;
+		}
+		pPLLReg = &pChipcHw->DDRClock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_ARM:
+		pPLLReg = &pChipcHw->ARMClock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_ESW:
+		pPLLReg = &pChipcHw->ESWClock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_VPM:
+		/* Configure the VPM:BUS ratio settings */
+		{
+			REG_LOCAL_IRQ_SAVE;
+			pChipcHw->VPMClock = (pChipcHw->VPMClock & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((chipcHw_divide (freq, chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1)
+				<< chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT);
+			REG_LOCAL_IRQ_RESTORE;
+		}
+		pPLLReg = &pChipcHw->VPMClock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_ESW125:
+		pPLLReg = &pChipcHw->ESW125Clock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_UART:
+		pPLLReg = &pChipcHw->UARTClock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_SDIO0:
+		pPLLReg = &pChipcHw->SDIO0Clock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_SDIO1:
+		pPLLReg = &pChipcHw->SDIO1Clock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_SPI:
+		pPLLReg = &pChipcHw->SPIClock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_ETM:
+		pPLLReg = &pChipcHw->ETMClock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_USB:
+		pPLLReg = &pChipcHw->USBClock;
+		vcoHz = vcoFreqPll2Hz;
+		desVcoHz = vcoFreqPll2Hz;
+		break;
+	case chipcHw_CLOCK_LCD:
+		pPLLReg = &pChipcHw->LCDClock;
+		vcoHz = vcoFreqPll2Hz;
+		desVcoHz = vcoFreqPll2Hz;
+		break;
+	case chipcHw_CLOCK_APM:
+		pPLLReg = &pChipcHw->APMClock;
+		vcoHz = vcoFreqPll2Hz;
+		desVcoHz = vcoFreqPll2Hz;
+		break;
+	case chipcHw_CLOCK_BUS:
+		pClockCtrl = &pChipcHw->ACLKClock;
+		pDependentClock = &pChipcHw->ARMClock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		dependentClockType = PLL_CLOCK;
+		break;
+	case chipcHw_CLOCK_OTP:
+		pClockCtrl = &pChipcHw->OTPClock;
+		break;
+	case chipcHw_CLOCK_I2C:
+		pClockCtrl = &pChipcHw->I2CClock;
+		break;
+	case chipcHw_CLOCK_I2S0:
+		pClockCtrl = &pChipcHw->I2S0Clock;
+		break;
+	case chipcHw_CLOCK_RTBUS:
+		pClockCtrl = &pChipcHw->RTBUSClock;
+		pDependentClock = &pChipcHw->ACLKClock;
+		dependentClockType = NON_PLL_CLOCK;
+		break;
+	case chipcHw_CLOCK_APM100:
+		pClockCtrl = &pChipcHw->APM100Clock;
+		pDependentClock = &pChipcHw->APMClock;
+		vcoHz = vcoFreqPll2Hz;
+		desVcoHz = vcoFreqPll2Hz;
+		dependentClockType = PLL_CLOCK;
+		break;
+	case chipcHw_CLOCK_TSC:
+		pClockCtrl = &pChipcHw->TSCClock;
+		break;
+	case chipcHw_CLOCK_LED:
+		pClockCtrl = &pChipcHw->LEDClock;
+		break;
+	case chipcHw_CLOCK_I2S1:
+		pClockCtrl = &pChipcHw->I2S1Clock;
+		break;
+	}
+
+	if (pPLLReg) {
+		/* Select XTAL as bypass source */
+		reg32_modify_and(pPLLReg, ~chipcHw_REG_PLL_CLOCK_SOURCE_GPIO);
+		reg32_modify_or(pPLLReg, chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
+		/* For DDR settings use only the PLL divider clock */
+		if (pPLLReg == &pChipcHw->DDRClock) {
+			/* Set M1DIV for PLL1, which controls the DDR clock */
+			reg32_write(&pChipcHw->PLLDivider, (pChipcHw->PLLDivider & 0x00FFFFFF) | ((chipcHw_REG_PLL_DIVIDER_MDIV (desVcoHz, freq)) << 24));
+			/* Calculate expected frequency */
+			freq = chipcHw_divide(vcoHz, (((pChipcHw->PLLDivider & 0xFF000000) >> 24) ? ((pChipcHw->PLLDivider & 0xFF000000) >> 24) : 256));
+		} else {
+			/* From chip revision number B0, LCD clock is internally divided by 2 */
+			if ((pPLLReg == &pChipcHw->LCDClock) && (chipcHw_getChipRevisionNumber() != chipcHw_REV_NUMBER_A0)) {
+				desVcoHz >>= 1;
+				vcoHz >>= 1;
+			}
+			/* Set MDIV to change the frequency */
+			reg32_modify_and(pPLLReg, ~(chipcHw_REG_PLL_CLOCK_MDIV_MASK));
+			reg32_modify_or(pPLLReg, chipcHw_REG_PLL_DIVIDER_MDIV(desVcoHz, freq));
+			/* Calculate expected frequency */
+			freq = chipcHw_divide(vcoHz, ((*(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (*(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256));
+		}
+		/* Wait for for atleast 200ns as per the protocol to change frequency */
+		udelay(1);
+		/* Do not bypass */
+		reg32_modify_and(pPLLReg, ~chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
+		/* Return the configured frequency */
+		return freq;
+	} else if (pClockCtrl) {
+		uint32_t divider = 0;
+
+		/* Divider clock should not be bypassed  */
+		reg32_modify_and(pClockCtrl,
+				 ~chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
+
+		/* Identify the clock source */
+		if (pDependentClock) {
+			switch (dependentClockType) {
+			case PLL_CLOCK:
+				divider = chipcHw_divide(chipcHw_divide (desVcoHz, (*pDependentClock & chipcHw_REG_PLL_CLOCK_MDIV_MASK)), freq);
+				break;
+			case NON_PLL_CLOCK:
+				{
+					uint32_t sourceClock = 0;
+
+					if (pDependentClock == (uint32_t *) &pChipcHw->ACLKClock) {
+						sourceClock = chipcHw_getClockFrequency (chipcHw_CLOCK_BUS);
+					} else {
+						uint32_t div = *pDependentClock & chipcHw_REG_DIV_CLOCK_DIV_MASK;
+						sourceClock = chipcHw_divide (chipcHw_XTAL_FREQ_Hz, ((div) ? div : 256));
+					}
+					divider = chipcHw_divide(sourceClock, freq);
+				}
+				break;
+			}
+		} else {
+			divider = chipcHw_divide(chipcHw_XTAL_FREQ_Hz, freq);
+		}
+
+		if (divider) {
+			REG_LOCAL_IRQ_SAVE;
+			/* Set the divider to obtain the required frequency */
+			*pClockCtrl = (*pClockCtrl & (~chipcHw_REG_DIV_CLOCK_DIV_MASK)) | (((divider > 256) ? chipcHw_REG_DIV_CLOCK_DIV_256 : divider) & chipcHw_REG_DIV_CLOCK_DIV_MASK);
+			REG_LOCAL_IRQ_RESTORE;
+			return freq;
+		}
+	}
+
+	return 0;
+}
+
+EXPORT_SYMBOL(chipcHw_setClockFrequency);
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM clock in sync with BUS clock for Chip Rev #A0
+*
+*  This function does the phase adjustment between VPM and BUS clock
+*
+*  @return >= 0 : On success (# of adjustment required)
+*            -1 : On failure
+*
+*/
+/****************************************************************************/
+static int vpmPhaseAlignA0(void)
+{
+	uint32_t phaseControl;
+	uint32_t phaseValue;
+	uint32_t prevPhaseComp;
+	int iter = 0;
+	int adjustCount = 0;
+	int count = 0;
+
+	for (iter = 0; (iter < MAX_PHASE_ALIGN_ATTEMPTS) && (adjustCount < MAX_PHASE_ADJUST_COUNT); iter++) {
+		phaseControl = (pChipcHw->VPMClock & chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT;
+		phaseValue = 0;
+		prevPhaseComp = 0;
+
+		/* Step 1: Look for falling PH_COMP transition */
+
+		/* Read the contents of VPM Clock resgister */
+		phaseValue = pChipcHw->VPMClock;
+		do {
+			/* Store previous value of phase comparator */
+			prevPhaseComp = phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP;
+			/* Change the value of PH_CTRL. */
+			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+			/* Wait atleast 20 ns */
+			udelay(1);
+			/* Toggle the LOAD_CH after phase control is written. */
+			pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+			/* Read the contents of  VPM Clock resgister. */
+			phaseValue = pChipcHw->VPMClock;
+
+			if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0x0) {
+				phaseControl = (0x3F & (phaseControl - 1));
+			} else {
+				/* Increment to the Phase count value for next write, if Phase is not stable. */
+				phaseControl = (0x3F & (phaseControl + 1));
+			}
+			/* Count number of adjustment made */
+			adjustCount++;
+		} while (((prevPhaseComp == (phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP)) ||	/* Look for a transition */
+			  ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) != 0x0)) &&	/* Look for a falling edge */
+			 (adjustCount < MAX_PHASE_ADJUST_COUNT)	/* Do not exceed the limit while trying */
+		    );
+
+		if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+			/* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
+			return -1;
+		}
+
+		/* Step 2: Keep moving forward to make sure falling PH_COMP transition was valid */
+
+		for (count = 0; (count < 5) && ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0); count++) {
+			phaseControl = (0x3F & (phaseControl + 1));
+			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+			/* Wait atleast 20 ns */
+			udelay(1);
+			/* Toggle the LOAD_CH after phase control is written. */
+			pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+			phaseValue = pChipcHw->VPMClock;
+			/* Count number of adjustment made */
+			adjustCount++;
+		}
+
+		if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+			/* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
+			return -1;
+		}
+
+		if (count != 5) {
+			/* Detected false transition */
+			continue;
+		}
+
+		/* Step 3: Keep moving backward to make sure falling PH_COMP transition was stable */
+
+		for (count = 0; (count < 3) && ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0); count++) {
+			phaseControl = (0x3F & (phaseControl - 1));
+			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+			/* Wait atleast 20 ns */
+			udelay(1);
+			/* Toggle the LOAD_CH after phase control is written. */
+			pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+			phaseValue = pChipcHw->VPMClock;
+			/* Count number of adjustment made */
+			adjustCount++;
+		}
+
+		if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+			/* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
+			return -1;
+		}
+
+		if (count != 3) {
+			/* Detected noisy transition */
+			continue;
+		}
+
+		/* Step 4: Keep moving backward before the original transition took place. */
+
+		for (count = 0; (count < 5); count++) {
+			phaseControl = (0x3F & (phaseControl - 1));
+			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+			/* Wait atleast 20 ns */
+			udelay(1);
+			/* Toggle the LOAD_CH after phase control is written. */
+			pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+			phaseValue = pChipcHw->VPMClock;
+			/* Count number of adjustment made */
+			adjustCount++;
+		}
+
+		if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+			/* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
+			return -1;
+		}
+
+		if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0) {
+			/* Detected false transition */
+			continue;
+		}
+
+		/* Step 5: Re discover the valid transition */
+
+		do {
+			/* Store previous value of phase comparator */
+			prevPhaseComp = phaseValue;
+			/* Change the value of PH_CTRL. */
+			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+			/* Wait atleast 20 ns */
+			udelay(1);
+			/* Toggle the LOAD_CH after phase control is written. */
+			pChipcHw->VPMClock ^=
+			    chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+			/* Read the contents of  VPM Clock resgister. */
+			phaseValue = pChipcHw->VPMClock;
+
+			if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0x0) {
+				phaseControl = (0x3F & (phaseControl - 1));
+			} else {
+				/* Increment to the Phase count value for next write, if Phase is not stable. */
+				phaseControl = (0x3F & (phaseControl + 1));
+			}
+
+			/* Count number of adjustment made */
+			adjustCount++;
+		} while (((prevPhaseComp == (phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP)) || ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) != 0x0)) && (adjustCount < MAX_PHASE_ADJUST_COUNT));
+
+		if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+			/* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries  */
+			return -1;
+		} else {
+			/* Valid phase must have detected */
+			break;
+		}
+	}
+
+	/* For VPM Phase should be perfectly aligned. */
+	phaseControl = (((pChipcHw->VPMClock >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT) - 1) & 0x3F);
+	{
+		REG_LOCAL_IRQ_SAVE;
+
+		pChipcHw->VPMClock = (pChipcHw->VPMClock & ~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT);
+		/* Load new phase value */
+		pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+
+		REG_LOCAL_IRQ_RESTORE;
+	}
+	/* Return the status */
+	return (int)adjustCount;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM clock in sync with BUS clock
+*
+*  This function does the phase adjustment between VPM and BUS clock
+*
+*  @return >= 0 : On success (# of adjustment required)
+*            -1 : On failure
+*
+*/
+/****************************************************************************/
+int chipcHw_vpmPhaseAlign(void)
+{
+
+	if (chipcHw_getChipRevisionNumber() == chipcHw_REV_NUMBER_A0) {
+		return vpmPhaseAlignA0();
+	} else {
+		uint32_t phaseControl = chipcHw_getVpmPhaseControl();
+		uint32_t phaseValue = 0;
+		int adjustCount = 0;
+
+		/* Disable VPM access */
+		pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
+		/* Disable HW VPM phase alignment  */
+		chipcHw_vpmHwPhaseAlignDisable();
+		/* Enable SW VPM phase alignment  */
+		chipcHw_vpmSwPhaseAlignEnable();
+		/* Adjust VPM phase */
+		while (adjustCount < MAX_PHASE_ADJUST_COUNT) {
+			phaseValue = chipcHw_getVpmHwPhaseAlignStatus();
+
+			/* Adjust phase control value */
+			if (phaseValue > 0xF) {
+				/* Increment phase control value */
+				phaseControl++;
+			} else if (phaseValue < 0xF) {
+				/* Decrement phase control value */
+				phaseControl--;
+			} else {
+				/* Enable VPM access */
+				pChipcHw->Spare1 |= chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
+				/* Return adjust count */
+				return adjustCount;
+			}
+			/* Change the value of PH_CTRL. */
+			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+			/* Wait atleast 20 ns */
+			udelay(1);
+			/* Toggle the LOAD_CH after phase control is written. */
+			pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+			/* Count adjustment */
+			adjustCount++;
+		}
+	}
+
+	/* Disable VPM access */
+	pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
+	return -1;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Local Divide function
+*
+*  This function does the divide
+*
+*  @return divide value
+*
+*/
+/****************************************************************************/
+static int chipcHw_divide(int num, int denom)
+{
+	int r;
+	int t = 1;
+
+	/* Shift denom and t up to the largest value to optimize algorithm */
+	/* t contains the units of each divide */
+	while ((denom & 0x40000000) == 0) {	/* fails if denom=0 */
+		denom = denom << 1;
+		t = t << 1;
+	}
+
+	/* Intialize the result */
+	r = 0;
+
+	do {
+		/* Determine if there exists a positive remainder */
+		if ((num - denom) >= 0) {
+			/* Accumlate t to the result and calculate a new remainder */
+			num = num - denom;
+			r = r + t;
+		}
+		/* Continue to shift denom and shift t down to 0 */
+		denom = denom >> 1;
+		t = t >> 1;
+	} while (t != 0);
+
+	return r;
+}
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c
new file mode 100644
index 00000000000..367df75d4bb
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c
@@ -0,0 +1,293 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    chipcHw_init.c
+*
+*  @brief   Low level CHIPC PLL configuration functions
+*
+*  @note
+*
+*   These routines provide basic PLL controlling functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/errno.h>
+#include <csp/stdint.h>
+#include <csp/module.h>
+
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+
+#include <csp/reg.h>
+#include <csp/delay.h>
+/* ---- Private Constants and Types --------------------------------------- */
+
+/*
+    Calculation for NDIV_i to obtain VCO frequency
+    -----------------------------------------------
+
+	Freq_vco = Freq_ref * (P2 / P1) * (PLL_NDIV_i + PLL_NDIV_f)
+	for Freq_vco = VCO_FREQ_MHz
+		Freq_ref = chipcHw_XTAL_FREQ_Hz
+		PLL_P1 = PLL_P2 = 1
+		and
+		PLL_NDIV_f = 0
+
+	We get:
+		PLL_NDIV_i = Freq_vco / Freq_ref = VCO_FREQ_MHz / chipcHw_XTAL_FREQ_Hz
+
+    Calculation for PLL MDIV to obtain frequency Freq_x for channel x
+    -----------------------------------------------------------------
+		Freq_x = chipcHw_XTAL_FREQ_Hz * PLL_NDIV_i / PLL_MDIV_x = VCO_FREQ_MHz / PLL_MDIV_x
+
+		PLL_MDIV_x = VCO_FREQ_MHz / Freq_x
+*/
+
+/* ---- Private Variables ------------------------------------------------- */
+/****************************************************************************/
+/**
+*  @brief  Initializes the PLL2
+*
+*  This function initializes the PLL2
+*
+*/
+/****************************************************************************/
+void chipcHw_pll2Enable(uint32_t vcoFreqHz)
+{
+	uint32_t pllPreDivider2 = 0;
+
+	{
+		REG_LOCAL_IRQ_SAVE;
+		pChipcHw->PLLConfig2 =
+		    chipcHw_REG_PLL_CONFIG_D_RESET |
+		    chipcHw_REG_PLL_CONFIG_A_RESET;
+
+		pllPreDivider2 = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN |
+		    chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER |
+		    (chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) <<
+		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
+		    (chipcHw_REG_PLL_PREDIVIDER_P1 <<
+		     chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
+		    (chipcHw_REG_PLL_PREDIVIDER_P2 <<
+		     chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
+
+		/* Enable CHIPC registers to control the PLL */
+		pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE;
+
+		/* Set pre divider to get desired VCO frequency */
+		pChipcHw->PLLPreDivider2 = pllPreDivider2;
+		/* Set NDIV Frac */
+		pChipcHw->PLLDivider2 = chipcHw_REG_PLL_DIVIDER_NDIV_f;
+
+		/* This has to be removed once the default values are fixed for PLL2. */
+		pChipcHw->PLLControl12 = 0x38000700;
+		pChipcHw->PLLControl22 = 0x00000015;
+
+		/* Reset PLL2 */
+		if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) {
+			pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET |
+			    chipcHw_REG_PLL_CONFIG_A_RESET |
+			    chipcHw_REG_PLL_CONFIG_VCO_1601_3200 |
+			    chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+		} else {
+			pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET |
+			    chipcHw_REG_PLL_CONFIG_A_RESET |
+			    chipcHw_REG_PLL_CONFIG_VCO_800_1600 |
+			    chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+		}
+		REG_LOCAL_IRQ_RESTORE;
+	}
+
+	/* Insert certain amount of delay before deasserting ARESET. */
+	udelay(1);
+
+	{
+		REG_LOCAL_IRQ_SAVE;
+		/* Remove analog reset and Power on the PLL */
+		pChipcHw->PLLConfig2 &=
+		    ~(chipcHw_REG_PLL_CONFIG_A_RESET |
+		      chipcHw_REG_PLL_CONFIG_POWER_DOWN);
+
+		REG_LOCAL_IRQ_RESTORE;
+
+	}
+
+	/* Wait until PLL is locked */
+	while (!(pChipcHw->PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED))
+		;
+
+	{
+		REG_LOCAL_IRQ_SAVE;
+		/* Remove digital reset */
+		pChipcHw->PLLConfig2 &= ~chipcHw_REG_PLL_CONFIG_D_RESET;
+
+		REG_LOCAL_IRQ_RESTORE;
+	}
+}
+
+EXPORT_SYMBOL(chipcHw_pll2Enable);
+
+/****************************************************************************/
+/**
+*  @brief  Initializes the PLL1
+*
+*  This function initializes the PLL1
+*
+*/
+/****************************************************************************/
+void chipcHw_pll1Enable(uint32_t vcoFreqHz, chipcHw_SPREAD_SPECTRUM_e ssSupport)
+{
+	uint32_t pllPreDivider = 0;
+
+	{
+		REG_LOCAL_IRQ_SAVE;
+
+		pChipcHw->PLLConfig =
+		    chipcHw_REG_PLL_CONFIG_D_RESET |
+		    chipcHw_REG_PLL_CONFIG_A_RESET;
+		/* Setting VCO frequency */
+		if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) {
+			pllPreDivider =
+			    chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_1_8 |
+			    ((chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) -
+			      1) << chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
+			    (chipcHw_REG_PLL_PREDIVIDER_P1 <<
+			     chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
+			    (chipcHw_REG_PLL_PREDIVIDER_P2 <<
+			     chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
+		} else {
+			pllPreDivider = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN |
+			    chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER |
+			    (chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) <<
+			     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
+			    (chipcHw_REG_PLL_PREDIVIDER_P1 <<
+			     chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
+			    (chipcHw_REG_PLL_PREDIVIDER_P2 <<
+			     chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
+		}
+
+		/* Enable CHIPC registers to control the PLL */
+		pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE;
+
+		/* Set pre divider to get desired VCO frequency */
+		pChipcHw->PLLPreDivider = pllPreDivider;
+		/* Set NDIV Frac */
+		if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) {
+			pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV |
+			    chipcHw_REG_PLL_DIVIDER_NDIV_f_SS;
+		} else {
+			pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV |
+			    chipcHw_REG_PLL_DIVIDER_NDIV_f;
+		}
+
+		/* Reset PLL1 */
+		if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) {
+			pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET |
+			    chipcHw_REG_PLL_CONFIG_A_RESET |
+			    chipcHw_REG_PLL_CONFIG_VCO_1601_3200 |
+			    chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+		} else {
+			pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET |
+			    chipcHw_REG_PLL_CONFIG_A_RESET |
+			    chipcHw_REG_PLL_CONFIG_VCO_800_1600 |
+			    chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+		}
+
+		REG_LOCAL_IRQ_RESTORE;
+
+		/* Insert certain amount of delay before deasserting ARESET. */
+		udelay(1);
+
+		{
+			REG_LOCAL_IRQ_SAVE;
+			/* Remove analog reset and Power on the PLL */
+			pChipcHw->PLLConfig &=
+			    ~(chipcHw_REG_PLL_CONFIG_A_RESET |
+			      chipcHw_REG_PLL_CONFIG_POWER_DOWN);
+			REG_LOCAL_IRQ_RESTORE;
+		}
+
+		/* Wait until PLL is locked */
+		while (!(pChipcHw->PLLStatus & chipcHw_REG_PLL_STATUS_LOCKED)
+		       || !(pChipcHw->
+			    PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED))
+			;
+
+		/* Remove digital reset */
+		{
+			REG_LOCAL_IRQ_SAVE;
+			pChipcHw->PLLConfig &= ~chipcHw_REG_PLL_CONFIG_D_RESET;
+			REG_LOCAL_IRQ_RESTORE;
+		}
+	}
+}
+
+EXPORT_SYMBOL(chipcHw_pll1Enable);
+
+/****************************************************************************/
+/**
+*  @brief  Initializes the chipc module
+*
+*  This function initializes the PLLs and core system clocks
+*
+*/
+/****************************************************************************/
+
+void chipcHw_Init(chipcHw_INIT_PARAM_t *initParam	/*  [ IN ] Misc chip initialization parameter */
+    ) {
+#if !(defined(__KERNEL__) && !defined(STANDALONE))
+	delay_init();
+#endif
+
+	/* Do not program PLL, when warm reset */
+	if (!(chipcHw_getStickyBits() & chipcHw_REG_STICKY_CHIP_WARM_RESET)) {
+		chipcHw_pll1Enable(initParam->pllVcoFreqHz,
+				   initParam->ssSupport);
+		chipcHw_pll2Enable(initParam->pll2VcoFreqHz);
+	} else {
+		/* Clear sticky bits */
+		chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_WARM_RESET);
+	}
+	/* Clear sticky bits */
+	chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_SOFT_RESET);
+
+	/* Before configuring the ARM clock, atleast we need to make sure BUS clock maintains the proper ratio with ARM clock */
+	pChipcHw->ACLKClock =
+	    (pChipcHw->
+	     ACLKClock & ~chipcHw_REG_ACLKClock_CLK_DIV_MASK) | (initParam->
+								 armBusRatio &
+								 chipcHw_REG_ACLKClock_CLK_DIV_MASK);
+
+	/* Set various core component frequencies. The order in which this is done is important for some. */
+	/* The RTBUS (DDR PHY) is derived from the BUS, and the BUS from the ARM, and VPM needs to know BUS */
+	/* frequency to find its ratio with the BUS.  Hence we must set the ARM first, followed by the BUS,  */
+	/* then VPM and RTBUS. */
+
+	chipcHw_setClockFrequency(chipcHw_CLOCK_ARM,
+				  initParam->busClockFreqHz *
+				  initParam->armBusRatio);
+	chipcHw_setClockFrequency(chipcHw_CLOCK_BUS, initParam->busClockFreqHz);
+	chipcHw_setClockFrequency(chipcHw_CLOCK_VPM,
+				  initParam->busClockFreqHz *
+				  initParam->vpmBusRatio);
+	chipcHw_setClockFrequency(chipcHw_CLOCK_DDR,
+				  initParam->busClockFreqHz *
+				  initParam->ddrBusRatio);
+	chipcHw_setClockFrequency(chipcHw_CLOCK_RTBUS,
+				  initParam->busClockFreqHz / 2);
+}
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c
new file mode 100644
index 00000000000..2671d8896bb
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c
@@ -0,0 +1,124 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <csp/stdint.h>
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+#include <csp/intcHw.h>
+#include <csp/cache.h>
+
+/* ---- Private Constants and Types --------------------------------------- */
+/* ---- Private Variables ------------------------------------------------- */
+void chipcHw_reset_run_from_aram(void);
+
+typedef void (*RUNFUNC) (void);
+
+/****************************************************************************/
+/**
+*  @brief   warmReset
+*
+*  @note warmReset configures the clocks which are not reset back to the state
+*   required to execute on reset.  To do so we need to copy the code into internal
+*   memory to change the ARM clock while we are not executing from DDR.
+*/
+/****************************************************************************/
+void chipcHw_reset(uint32_t mask)
+{
+	int i = 0;
+	RUNFUNC runFunc = (RUNFUNC) (unsigned long)MM_ADDR_IO_ARAM;
+
+	/* Disable all interrupts */
+	intcHw_irq_disable(INTCHW_INTC0, 0xffffffff);
+	intcHw_irq_disable(INTCHW_INTC1, 0xffffffff);
+	intcHw_irq_disable(INTCHW_SINTC, 0xffffffff);
+
+	{
+		REG_LOCAL_IRQ_SAVE;
+		if (mask & chipcHw_REG_SOFT_RESET_CHIP_SOFT) {
+			chipcHw_softReset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
+		}
+		/* Bypass the PLL clocks before reboot */
+		pChipcHw->UARTClock |= chipcHw_REG_PLL_CLOCK_BYPASS_SELECT;
+		pChipcHw->SPIClock |= chipcHw_REG_PLL_CLOCK_BYPASS_SELECT;
+
+		/* Copy the chipcHw_warmReset_run_from_aram function into ARAM */
+		do {
+			((uint32_t *) MM_IO_BASE_ARAM)[i] =
+			    ((uint32_t *) &chipcHw_reset_run_from_aram)[i];
+			i++;
+		} while (((uint32_t *) MM_IO_BASE_ARAM)[i - 1] != 0xe1a0f00f);	/* 0xe1a0f00f == asm ("mov r15, r15"); */
+
+		CSP_CACHE_FLUSH_ALL;
+
+		/* run the function from ARAM */
+		runFunc();
+
+		/* Code will never get here, but include it to balance REG_LOCAL_IRQ_SAVE above */
+		REG_LOCAL_IRQ_RESTORE;
+	}
+}
+
+/* This function must run from internal memory */
+void chipcHw_reset_run_from_aram(void)
+{
+/* Make sure, pipeline is filled with instructions coming from ARAM */
+__asm (" nop                                                            \n\t"
+		" nop                                                            \n\t"
+#if defined(__KERNEL__) && !defined(STANDALONE)
+		" MRC      p15,#0x0,r0,c1,c0,#0                                  \n\t"
+		" BIC      r0,r0,#0xd                                            \n\t"
+		" MCR      p15,#0x0,r0,c1,c0,#0                                  \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+#endif
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+/* Bypass the ARM clock and switch to XTAL clock */
+		" MOV      r2,#0x80000000                                        \n\t"
+		" LDR      r3,[r2,#8]                                            \n\t"
+		" ORR      r3,r3,#0x20000                                        \n\t"
+		" STR      r3,[r2,#8]                                            \n\t"
+
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+/* Issue reset */
+		" MOV      r3,#0x2                                               \n\t"
+		" STR      r3,[r2,#0x80]                                         \n\t"
+/* End here */
+		" MOV      pc,pc                                                 \n\t");
+/* 0xe1a0f00f ==  asm ("mov r15, r15"); */
+}
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c
new file mode 100644
index 00000000000..54ad964fe94
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c
@@ -0,0 +1,64 @@
+/*****************************************************************************
+* Copyright 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+/****************************************************************************/
+/**
+*  @file    chipcHw_str.c
+*
+*  @brief   Contains strings which are useful to linux and csp
+*
+*  @note
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <mach/csp/chipcHw_inline.h>
+
+/* ---- Private Constants and Types --------------------------------------- */
+
+static const char *gMuxStr[] = {
+	"GPIO",			/* 0 */
+	"KeyPad",		/* 1 */
+	"I2C-Host",		/* 2 */
+	"SPI",			/* 3 */
+	"Uart",			/* 4 */
+	"LED-Mtx-P",		/* 5 */
+	"LED-Mtx-S",		/* 6 */
+	"SDIO-0",		/* 7 */
+	"SDIO-1",		/* 8 */
+	"PCM",			/* 9 */
+	"I2S",			/* 10 */
+	"ETM",			/* 11 */
+	"Debug",		/* 12 */
+	"Misc",			/* 13 */
+	"0xE",			/* 14 */
+	"0xF",			/* 15 */
+};
+
+/****************************************************************************/
+/**
+*  @brief   Retrieves a string representation of the mux setting for a pin.
+*
+*  @return  Pointer to a character string.
+*/
+/****************************************************************************/
+
+const char *chipcHw_getGpioPinFunctionStr(int pin)
+{
+	if ((pin < 0) || (pin >= chipcHw_GPIO_COUNT)) {
+		return "";
+	}
+
+	return gMuxStr[chipcHw_getGpioPinFunction(pin)];
+}
-- 
cgit v1.2.3


From 1a4a561bdd838b4455d57edf0deaf83e894d795e Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:07:22 +0100
Subject: ARM: 5658/1: bcmring: add csp dmac header files

add csp dmac header files

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/include/csp/dmacHw.h         | 596 +++++++++++++++++++++
 .../mach-bcmring/include/mach/csp/dmacHw_priv.h    | 145 +++++
 .../arm/mach-bcmring/include/mach/csp/dmacHw_reg.h | 406 ++++++++++++++
 3 files changed, 1147 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/csp/dmacHw.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h

(limited to 'arch/arm')

diff --git a/arch/arm/mach-bcmring/include/csp/dmacHw.h b/arch/arm/mach-bcmring/include/csp/dmacHw.h
new file mode 100644
index 00000000000..5d510130a25
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/dmacHw.h
@@ -0,0 +1,596 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    dmacHw.h
+*
+*  @brief   API definitions for low level DMA controller driver
+*
+*/
+/****************************************************************************/
+#ifndef _DMACHW_H
+#define _DMACHW_H
+
+#include <stddef.h>
+
+#include <csp/stdint.h>
+#include <mach/csp/dmacHw_reg.h>
+
+/* Define DMA Channel ID using DMA controller number (m) and channel number (c).
+
+   System specific channel ID should be defined as follows
+
+   For example:
+
+   #include <dmacHw.h>
+   ...
+   #define systemHw_LCD_CHANNEL_ID                dmacHw_MAKE_CHANNEL_ID(0,5)
+   #define systemHw_SWITCH_RX_CHANNEL_ID          dmacHw_MAKE_CHANNEL_ID(0,0)
+   #define systemHw_SWITCH_TX_CHANNEL_ID          dmacHw_MAKE_CHANNEL_ID(0,1)
+   #define systemHw_APM_RX_CHANNEL_ID             dmacHw_MAKE_CHANNEL_ID(0,3)
+   #define systemHw_APM_TX_CHANNEL_ID             dmacHw_MAKE_CHANNEL_ID(0,4)
+   ...
+   #define systemHw_SHARED1_CHANNEL_ID            dmacHw_MAKE_CHANNEL_ID(1,4)
+   #define systemHw_SHARED2_CHANNEL_ID            dmacHw_MAKE_CHANNEL_ID(1,5)
+   #define systemHw_SHARED3_CHANNEL_ID            dmacHw_MAKE_CHANNEL_ID(0,6)
+   ...
+*/
+#define dmacHw_MAKE_CHANNEL_ID(m, c)         (m << 8 | c)
+
+typedef enum {
+	dmacHw_CHANNEL_PRIORITY_0 = dmacHw_REG_CFG_LO_CH_PRIORITY_0,	/* Channel priority 0. Lowest priority DMA channel */
+	dmacHw_CHANNEL_PRIORITY_1 = dmacHw_REG_CFG_LO_CH_PRIORITY_1,	/* Channel priority 1 */
+	dmacHw_CHANNEL_PRIORITY_2 = dmacHw_REG_CFG_LO_CH_PRIORITY_2,	/* Channel priority 2 */
+	dmacHw_CHANNEL_PRIORITY_3 = dmacHw_REG_CFG_LO_CH_PRIORITY_3,	/* Channel priority 3 */
+	dmacHw_CHANNEL_PRIORITY_4 = dmacHw_REG_CFG_LO_CH_PRIORITY_4,	/* Channel priority 4 */
+	dmacHw_CHANNEL_PRIORITY_5 = dmacHw_REG_CFG_LO_CH_PRIORITY_5,	/* Channel priority 5 */
+	dmacHw_CHANNEL_PRIORITY_6 = dmacHw_REG_CFG_LO_CH_PRIORITY_6,	/* Channel priority 6 */
+	dmacHw_CHANNEL_PRIORITY_7 = dmacHw_REG_CFG_LO_CH_PRIORITY_7	/* Channel priority 7. Highest priority DMA channel */
+} dmacHw_CHANNEL_PRIORITY_e;
+
+/* Source destination master interface */
+typedef enum {
+	dmacHw_SRC_MASTER_INTERFACE_1 = dmacHw_REG_CTL_SMS_1,	/* Source DMA master interface 1 */
+	dmacHw_SRC_MASTER_INTERFACE_2 = dmacHw_REG_CTL_SMS_2,	/* Source DMA master interface 2 */
+	dmacHw_DST_MASTER_INTERFACE_1 = dmacHw_REG_CTL_DMS_1,	/* Destination DMA master interface 1 */
+	dmacHw_DST_MASTER_INTERFACE_2 = dmacHw_REG_CTL_DMS_2	/* Destination DMA master interface 2 */
+} dmacHw_MASTER_INTERFACE_e;
+
+typedef enum {
+	dmacHw_SRC_TRANSACTION_WIDTH_8 = dmacHw_REG_CTL_SRC_TR_WIDTH_8,	/* Source 8 bit  (1 byte) per transaction */
+	dmacHw_SRC_TRANSACTION_WIDTH_16 = dmacHw_REG_CTL_SRC_TR_WIDTH_16,	/* Source 16 bit (2 byte) per transaction */
+	dmacHw_SRC_TRANSACTION_WIDTH_32 = dmacHw_REG_CTL_SRC_TR_WIDTH_32,	/* Source 32 bit (4 byte) per transaction */
+	dmacHw_SRC_TRANSACTION_WIDTH_64 = dmacHw_REG_CTL_SRC_TR_WIDTH_64,	/* Source 64 bit (8 byte) per transaction */
+	dmacHw_DST_TRANSACTION_WIDTH_8 = dmacHw_REG_CTL_DST_TR_WIDTH_8,	/* Destination 8 bit  (1 byte) per transaction */
+	dmacHw_DST_TRANSACTION_WIDTH_16 = dmacHw_REG_CTL_DST_TR_WIDTH_16,	/* Destination 16 bit (2 byte) per transaction */
+	dmacHw_DST_TRANSACTION_WIDTH_32 = dmacHw_REG_CTL_DST_TR_WIDTH_32,	/* Destination 32 bit (4 byte) per transaction */
+	dmacHw_DST_TRANSACTION_WIDTH_64 = dmacHw_REG_CTL_DST_TR_WIDTH_64	/* Destination 64 bit (8 byte) per transaction */
+} dmacHw_TRANSACTION_WIDTH_e;
+
+typedef enum {
+	dmacHw_SRC_BURST_WIDTH_0 = dmacHw_REG_CTL_SRC_MSIZE_0,	/* Source No burst */
+	dmacHw_SRC_BURST_WIDTH_4 = dmacHw_REG_CTL_SRC_MSIZE_4,	/* Source 4  X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+	dmacHw_SRC_BURST_WIDTH_8 = dmacHw_REG_CTL_SRC_MSIZE_8,	/* Source 8  X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+	dmacHw_SRC_BURST_WIDTH_16 = dmacHw_REG_CTL_SRC_MSIZE_16,	/* Source 16 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+	dmacHw_DST_BURST_WIDTH_0 = dmacHw_REG_CTL_DST_MSIZE_0,	/* Destination No burst */
+	dmacHw_DST_BURST_WIDTH_4 = dmacHw_REG_CTL_DST_MSIZE_4,	/* Destination 4  X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+	dmacHw_DST_BURST_WIDTH_8 = dmacHw_REG_CTL_DST_MSIZE_8,	/* Destination 8  X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+	dmacHw_DST_BURST_WIDTH_16 = dmacHw_REG_CTL_DST_MSIZE_16	/* Destination 16 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+} dmacHw_BURST_WIDTH_e;
+
+typedef enum {
+	dmacHw_TRANSFER_TYPE_MEM_TO_MEM = dmacHw_REG_CTL_TTFC_MM_DMAC,	/* Memory to memory transfer */
+	dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM = dmacHw_REG_CTL_TTFC_PM_DMAC,	/* Peripheral to memory transfer */
+	dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL = dmacHw_REG_CTL_TTFC_MP_DMAC,	/* Memory to peripheral transfer */
+	dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL = dmacHw_REG_CTL_TTFC_PP_DMAC	/* Peripheral to peripheral transfer */
+} dmacHw_TRANSFER_TYPE_e;
+
+typedef enum {
+	dmacHw_TRANSFER_MODE_PERREQUEST,	/* Block transfer per DMA request */
+	dmacHw_TRANSFER_MODE_CONTINUOUS,	/* Continuous transfer of streaming data */
+	dmacHw_TRANSFER_MODE_PERIODIC	/* Periodic transfer of streaming data */
+} dmacHw_TRANSFER_MODE_e;
+
+typedef enum {
+	dmacHw_SRC_ADDRESS_UPDATE_MODE_INC = dmacHw_REG_CTL_SINC_INC,	/* Increment source address after every transaction */
+	dmacHw_SRC_ADDRESS_UPDATE_MODE_DEC = dmacHw_REG_CTL_SINC_DEC,	/* Decrement source address after every transaction */
+	dmacHw_DST_ADDRESS_UPDATE_MODE_INC = dmacHw_REG_CTL_DINC_INC,	/* Increment destination address after every transaction */
+	dmacHw_DST_ADDRESS_UPDATE_MODE_DEC = dmacHw_REG_CTL_DINC_DEC,	/* Decrement destination address after every transaction */
+	dmacHw_SRC_ADDRESS_UPDATE_MODE_NC = dmacHw_REG_CTL_SINC_NC,	/* No change in source address after every transaction */
+	dmacHw_DST_ADDRESS_UPDATE_MODE_NC = dmacHw_REG_CTL_DINC_NC	/* No change in destination address after every transaction */
+} dmacHw_ADDRESS_UPDATE_MODE_e;
+
+typedef enum {
+	dmacHw_FLOW_CONTROL_DMA,	/* DMA working as flow controller (default) */
+	dmacHw_FLOW_CONTROL_PERIPHERAL	/* Peripheral working as flow controller */
+} dmacHw_FLOW_CONTROL_e;
+
+typedef enum {
+	dmacHw_TRANSFER_STATUS_BUSY,	/* DMA Transfer ongoing */
+	dmacHw_TRANSFER_STATUS_DONE,	/* DMA Transfer completed */
+	dmacHw_TRANSFER_STATUS_ERROR	/* DMA Transfer error */
+} dmacHw_TRANSFER_STATUS_e;
+
+typedef enum {
+	dmacHw_INTERRUPT_DISABLE,	/* Interrupt disable  */
+	dmacHw_INTERRUPT_ENABLE	/* Interrupt enable */
+} dmacHw_INTERRUPT_e;
+
+typedef enum {
+	dmacHw_INTERRUPT_STATUS_NONE = 0x0,	/* No DMA interrupt */
+	dmacHw_INTERRUPT_STATUS_TRANS = 0x1,	/* End of DMA transfer interrupt */
+	dmacHw_INTERRUPT_STATUS_BLOCK = 0x2,	/* End of block transfer interrupt */
+	dmacHw_INTERRUPT_STATUS_ERROR = 0x4	/* Error interrupt */
+} dmacHw_INTERRUPT_STATUS_e;
+
+typedef enum {
+	dmacHw_CONTROLLER_ATTRIB_CHANNEL_NUM,	/* Number of DMA channel */
+	dmacHw_CONTROLLER_ATTRIB_CHANNEL_MAX_BLOCK_SIZE,	/* Maximum channel burst size */
+	dmacHw_CONTROLLER_ATTRIB_MASTER_INTF_NUM,	/* Number of DMA master interface */
+	dmacHw_CONTROLLER_ATTRIB_CHANNEL_BUS_WIDTH,	/* Channel Data bus width */
+	dmacHw_CONTROLLER_ATTRIB_CHANNEL_FIFO_SIZE	/* Channel FIFO size */
+} dmacHw_CONTROLLER_ATTRIB_e;
+
+typedef unsigned long dmacHw_HANDLE_t;	/* DMA channel handle */
+typedef uint32_t dmacHw_ID_t;	/* DMA channel Id.  Must be created using
+				   "dmacHw_MAKE_CHANNEL_ID" macro
+				 */
+/* DMA channel configuration parameters */
+typedef struct {
+	uint32_t srcPeripheralPort;	/* Source peripheral port */
+	uint32_t dstPeripheralPort;	/* Destination peripheral port */
+	uint32_t srcStatusRegisterAddress;	/* Source status register address */
+	uint32_t dstStatusRegisterAddress;	/* Destination status register address of type  */
+
+	uint32_t srcGatherWidth;	/* Number of bytes gathered before successive gather opearation */
+	uint32_t srcGatherJump;	/* Number of bytes jumpped before successive gather opearation */
+	uint32_t dstScatterWidth;	/* Number of bytes sacattered before successive scatter opearation */
+	uint32_t dstScatterJump;	/* Number of bytes jumpped  before successive scatter opearation */
+	uint32_t maxDataPerBlock;	/* Maximum number of bytes to be transferred per block/descrptor.
+					   0 = Maximum possible.
+					 */
+
+	dmacHw_ADDRESS_UPDATE_MODE_e srcUpdate;	/* Source address update mode */
+	dmacHw_ADDRESS_UPDATE_MODE_e dstUpdate;	/* Destination address update mode */
+	dmacHw_TRANSFER_TYPE_e transferType;	/* DMA transfer type  */
+	dmacHw_TRANSFER_MODE_e transferMode;	/* DMA transfer mode */
+	dmacHw_MASTER_INTERFACE_e srcMasterInterface;	/* DMA source interface  */
+	dmacHw_MASTER_INTERFACE_e dstMasterInterface;	/* DMA destination interface */
+	dmacHw_TRANSACTION_WIDTH_e srcMaxTransactionWidth;	/* Source transaction width   */
+	dmacHw_TRANSACTION_WIDTH_e dstMaxTransactionWidth;	/* Destination transaction width */
+	dmacHw_BURST_WIDTH_e srcMaxBurstWidth;	/* Source burst width */
+	dmacHw_BURST_WIDTH_e dstMaxBurstWidth;	/* Destination burst width */
+	dmacHw_INTERRUPT_e blockTransferInterrupt;	/* Block trsnafer interrupt */
+	dmacHw_INTERRUPT_e completeTransferInterrupt;	/* Complete DMA trsnafer interrupt */
+	dmacHw_INTERRUPT_e errorInterrupt;	/* Error interrupt */
+	dmacHw_CHANNEL_PRIORITY_e channelPriority;	/* Channel priority */
+	dmacHw_FLOW_CONTROL_e flowControler;	/* Data flow controller */
+} dmacHw_CONFIG_t;
+
+/****************************************************************************/
+/**
+*  @brief   Initializes DMA
+*
+*  This function initializes DMA CSP driver
+*
+*  @note
+*     Must be called before using any DMA channel
+*/
+/****************************************************************************/
+void dmacHw_initDma(void);
+
+/****************************************************************************/
+/**
+*  @brief   Exit function for  DMA
+*
+*  This function isolates DMA from the system
+*
+*/
+/****************************************************************************/
+void dmacHw_exitDma(void);
+
+/****************************************************************************/
+/**
+*  @brief   Gets a handle to a DMA channel
+*
+*  This function returns a handle, representing a control block of a particular DMA channel
+*
+*  @return  -1       - On Failure
+*            handle  - On Success, representing a channel control block
+*
+*  @note
+*     None  Channel ID must be created using "dmacHw_MAKE_CHANNEL_ID" macro
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getChannelHandle(dmacHw_ID_t channelId	/* [ IN ] DMA Channel Id */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Initializes a DMA channel for use
+*
+*  This function initializes and resets a DMA channel for use
+*
+*  @return  -1     - On Failure
+*            0     - On Success
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+int dmacHw_initChannel(dmacHw_HANDLE_t handle	/*  [ IN ] DMA Channel handle  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief  Estimates number of descriptor needed to perform certain DMA transfer
+*
+*
+*  @return  On failure : -1
+*           On success : Number of descriptor count
+*
+*
+*/
+/****************************************************************************/
+int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+				    void *pSrcAddr,	/*   [ IN ] Source (Peripheral/Memory) address */
+				    void *pDstAddr,	/*   [ IN ] Destination (Peripheral/Memory) address */
+				    size_t dataLen	/*   [ IN ] Data length in bytes */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Initializes descriptor ring
+*
+*  This function will initializes the descriptor ring of a DMA channel
+*
+*
+*  @return   -1 - On failure
+*             0 - On success
+*  @note
+*     - "len" parameter should be obtained from "dmacHw_descriptorLen"
+*     - Descriptor buffer MUST be 32 bit aligned and uncached as it
+*       is accessed by ARM and DMA
+*/
+/****************************************************************************/
+int dmacHw_initDescriptor(void *pDescriptorVirt,	/*  [ IN ] Virtual address of uncahced buffer allocated to form descriptor ring */
+			  uint32_t descriptorPhyAddr,	/*  [ IN ] Physical address of pDescriptorVirt (descriptor buffer) */
+			  uint32_t len,	/*  [ IN ] Size of the pBuf */
+			  uint32_t num	/*  [ IN ] Number of descriptor in the ring */
+    );
+
+/****************************************************************************/
+/**
+*  @brief  Finds amount of memory required to form a descriptor ring
+*
+*
+*  @return   Number of bytes required to form a descriptor ring
+*
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorLen(uint32_t descCnt	/*  [ IN ] Number of descriptor in the ring */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Configure DMA channel
+*
+*  @return  0  : On success
+*           -1 : On failure
+*/
+/****************************************************************************/
+int dmacHw_configChannel(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle  */
+			 dmacHw_CONFIG_t *pConfig	/*   [ IN ] Configuration settings */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set descriptors for known data length
+*
+*  When DMA has to work as a flow controller, this function prepares the
+*  descriptor chain to transfer data
+*
+*  from:
+*          - Memory to memory
+*          - Peripheral to memory
+*          - Memory to Peripheral
+*          - Peripheral to Peripheral
+*
+*  @return   -1 - On failure
+*             0 - On success
+*
+*/
+/****************************************************************************/
+int dmacHw_setDataDescriptor(dmacHw_CONFIG_t *pConfig,	/*  [ IN ] Configuration settings */
+			     void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
+			     void *pSrcAddr,	/*  [ IN ] Source (Peripheral/Memory) address */
+			     void *pDstAddr,	/*  [ IN ] Destination (Peripheral/Memory) address */
+			     size_t dataLen	/*  [ IN ] Length in bytes   */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Indicates whether DMA transfer is in progress or completed
+*
+*  @return   DMA transfer status
+*          dmacHw_TRANSFER_STATUS_BUSY:         DMA Transfer ongoing
+*          dmacHw_TRANSFER_STATUS_DONE:         DMA Transfer completed
+*          dmacHw_TRANSFER_STATUS_ERROR:        DMA Transfer error
+*
+*/
+/****************************************************************************/
+dmacHw_TRANSFER_STATUS_e dmacHw_transferCompleted(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set descriptor carrying control information
+*
+*  This function will be used to send specific control information to the device
+*  using the DMA channel
+*
+*
+*  @return  -1 - On failure
+*            0 - On success
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig,	/*  [ IN ] Configuration settings */
+				void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
+				uint32_t ctlAddress,	/*  [ IN ] Address of the device control register  */
+				uint32_t control	/*  [ IN ] Device control information */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Read data DMA transferred to memory
+*
+*  This function will read data that has been DMAed to memory while transfering from:
+*          - Memory to memory
+*          - Peripheral to memory
+*
+*  @return  0 - No more data is available to read
+*           1 - More data might be available to read
+*
+*/
+/****************************************************************************/
+int dmacHw_readTransferredData(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle    */
+			       dmacHw_CONFIG_t *pConfig,	/*  [ IN ]  Configuration settings */
+			       void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
+			       void **ppBbuf,	/*  [ OUT ] Data received */
+			       size_t *pLlen	/*  [ OUT ] Length of the data received */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Prepares descriptor ring, when source peripheral working as a flow controller
+*
+*  This function will form the descriptor ring by allocating buffers, when source peripheral
+*  has to work as a flow controller to transfer data from:
+*           - Peripheral to memory.
+*
+*  @return  -1 - On failure
+*            0 - On success
+*
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle   */
+				     dmacHw_CONFIG_t *pConfig,	/*  [ IN ] Configuration settings */
+				     void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
+				     uint32_t srcAddr,	/*  [ IN ] Source peripheral address */
+				     void *(*fpAlloc) (int len),	/*  [ IN ] Function pointer  that provides destination memory */
+				     int len,	/*  [ IN ] Number of bytes "fpAlloc" will allocate for destination */
+				     int num	/*  [ IN ] Number of descriptor to set */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Program channel register to initiate transfer
+*
+*  @return  void
+*
+*
+*  @note
+*     - Descriptor buffer MUST ALWAYS be flushed before calling this function
+*     - This function should also be called from ISR to program the channel with
+*       pending descriptors
+*/
+/****************************************************************************/
+void dmacHw_initiateTransfer(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
+			     dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+			     void *pDescriptor	/*   [ IN ] Descriptor buffer  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Resets descriptor control information
+*
+*  @return  void
+*/
+/****************************************************************************/
+void dmacHw_resetDescriptorControl(void *pDescriptor	/*   [ IN ] Descriptor buffer  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Program channel register to stop transfer
+*
+*  Ensures the channel is not doing any transfer after calling this function
+*
+*  @return  void
+*
+*/
+/****************************************************************************/
+void dmacHw_stopTransfer(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Check the existance of pending descriptor
+*
+*  This function confirmes if there is any pending descriptor in the chain
+*  to program the channel
+*
+*  @return  1 : Channel need to be programmed with pending descriptor
+*           0 : No more pending descriptor to programe the channel
+*
+*  @note
+*     - This function should be called from ISR in case there are pending
+*       descriptor to program the channel.
+*
+*     Example:
+*
+*     dmac_isr ()
+*     {
+*         ...
+*         if (dmacHw_descriptorPending (handle))
+*         {
+*            dmacHw_initiateTransfer (handle);
+*         }
+*     }
+*
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorPending(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
+				  void *pDescriptor	/*   [ IN ] Descriptor buffer */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Deallocates source or destination memory, allocated
+*
+*  This function can be called to deallocate data memory that was DMAed successfully
+*
+*  @return  -1  - On failure
+*            0  - On success
+*
+*  @note
+*     This function will be called ONLY, when source OR destination address is pointing
+*     to dynamic memory
+*/
+/****************************************************************************/
+int dmacHw_freeMem(dmacHw_CONFIG_t *pConfig,	/*  [ IN ] Configuration settings */
+		   void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
+		   void (*fpFree) (void *)	/*  [ IN ] Function pointer to free data memory */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Clears the interrupt
+*
+*  This function clears the DMA channel specific interrupt
+*
+*  @return   N/A
+*
+*  @note
+*     Must be called under the context of ISR
+*/
+/****************************************************************************/
+void dmacHw_clearInterrupt(dmacHw_HANDLE_t handle	/*  [ IN ] DMA Channel handle  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Returns the cause of channel specific DMA interrupt
+*
+*  This function returns the cause of interrupt
+*
+*  @return  Interrupt status, each bit representing a specific type of interrupt
+*           of type dmacHw_INTERRUPT_STATUS_e
+*  @note
+*           This function should be called under the context of ISR
+*/
+/****************************************************************************/
+dmacHw_INTERRUPT_STATUS_e dmacHw_getInterruptStatus(dmacHw_HANDLE_t handle	/*  [ IN ] DMA Channel handle  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Indentifies a DMA channel causing interrupt
+*
+*  This functions returns a channel causing interrupt of type dmacHw_INTERRUPT_STATUS_e
+*
+*  @return  NULL   : No channel causing DMA interrupt
+*           ! NULL : Handle to a channel causing DMA interrupt
+*  @note
+*     dmacHw_clearInterrupt() must be called with a valid handle after calling this function
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getInterruptSource(void);
+
+/****************************************************************************/
+/**
+*  @brief   Sets channel specific user data
+*
+*  This function associates user data to a specif DMA channel
+*
+*/
+/****************************************************************************/
+void dmacHw_setChannelUserData(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle  */
+			       void *userData	/*  [ IN ] User data  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Gets channel specific user data
+*
+*  This function returns user data specific to a DMA channel
+*
+*  @return   user data
+*/
+/****************************************************************************/
+void *dmacHw_getChannelUserData(dmacHw_HANDLE_t handle	/*  [ IN ] DMA Channel handle  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Displays channel specific registers and other control parameters
+*
+*
+*  @return  void
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+void dmacHw_printDebugInfo(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle  */
+			   void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
+			   int (*fpPrint) (const char *, ...)	/*  [ IN ] Print callback function */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Provides DMA controller attributes
+*
+*
+*  @return  DMA controller attributes
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle,	/*  [ IN ]  DMA Channel handle  */
+					  dmacHw_CONTROLLER_ATTRIB_e attr	/*  [ IN ]  DMA Controler attribute of type  dmacHw_CONTROLLER_ATTRIB_e */
+    );
+
+#endif /* _DMACHW_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
new file mode 100644
index 00000000000..375066ad018
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
@@ -0,0 +1,145 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    dmacHw_priv.h
+*
+*  @brief   Private Definitions for low level DMA driver
+*
+*/
+/****************************************************************************/
+
+#ifndef _DMACHW_PRIV_H
+#define _DMACHW_PRIV_H
+
+#include <csp/stdint.h>
+
+/* Data type for DMA Link List Item */
+typedef struct {
+	uint32_t sar;		/* Source Adress Register.
+				   Address must be aligned to CTLx.SRC_TR_WIDTH.             */
+	uint32_t dar;		/* Destination Address Register.
+				   Address must be aligned to CTLx.DST_TR_WIDTH.             */
+	uint32_t llpPhy;	/* LLP contains the physical address of the next descriptor for block chaining using linked lists.
+				   Address MUST be aligned to a 32-bit boundary.             */
+	dmacHw_REG64_t ctl;	/* Control Register. 64 bits */
+	uint32_t sstat;		/* Source Status Register */
+	uint32_t dstat;		/* Destination Status Register */
+	uint32_t devCtl;	/* Device specific control information */
+	uint32_t llp;		/* LLP contains the virtual address of the next descriptor for block chaining using linked lists. */
+} dmacHw_DESC_t;
+
+/*
+ *  Descriptor ring pointers
+ */
+typedef struct {
+	int num;		/* Number of link items */
+	dmacHw_DESC_t *pHead;	/* Head of descriptor ring (for writing) */
+	dmacHw_DESC_t *pTail;	/* Tail of descriptor ring (for reading) */
+	dmacHw_DESC_t *pProg;	/* Descriptor to program the channel (for programming the channel register) */
+	dmacHw_DESC_t *pEnd;	/* End of current descriptor chain */
+	dmacHw_DESC_t *pFree;	/* Descriptor to free memory (freeing dynamic memory) */
+	uint32_t virt2PhyOffset;	/* Virtual to physical address offset for the descriptor ring */
+} dmacHw_DESC_RING_t;
+
+/*
+ *  DMA channel control block
+ */
+typedef struct {
+	uint32_t module;	/* DMA controller module (0-1) */
+	uint32_t channel;	/* DMA channel (0-7) */
+	volatile uint32_t varDataStarted;	/* Flag indicating variable data channel is enabled */
+	volatile uint32_t descUpdated;	/* Flag to indicate descriptor update is complete */
+	void *userData;		/* Channel specifc user data */
+} dmacHw_CBLK_t;
+
+#define dmacHw_ASSERT(a)                  if (!(a)) while (1)
+#define dmacHw_MAX_CHANNEL_COUNT          16
+#define dmacHw_FREE_USER_MEMORY           0xFFFFFFFF
+#define dmacHw_DESC_FREE                  dmacHw_REG_CTL_DONE
+#define dmacHw_DESC_INIT                  ((dmacHw_DESC_t *) 0xFFFFFFFF)
+#define dmacHw_MAX_BLOCKSIZE              4064
+#define dmacHw_GET_DESC_RING(addr)        (dmacHw_DESC_RING_t *)(addr)
+#define dmacHw_ADDRESS_MASK(byte)         ((byte) - 1)
+#define dmacHw_NEXT_DESC(rp, dp)           ((rp)->dp = (dmacHw_DESC_t *)(rp)->dp->llp)
+#define dmacHw_HANDLE_TO_CBLK(handle)     ((dmacHw_CBLK_t *) (handle))
+#define dmacHw_CBLK_TO_HANDLE(cblkp)      ((dmacHw_HANDLE_t) (cblkp))
+#define dmacHw_DST_IS_MEMORY(tt)          (((tt) ==  dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM) || ((tt) == dmacHw_TRANSFER_TYPE_MEM_TO_MEM)) ? 1 : 0
+
+/****************************************************************************/
+/**
+*  @brief   Get next available transaction width
+*
+*
+*  @return  On sucess  : Next avail able transaction width
+*           On failure : dmacHw_TRANSACTION_WIDTH_8
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+static inline dmacHw_TRANSACTION_WIDTH_e dmacHw_GetNextTrWidth(dmacHw_TRANSACTION_WIDTH_e tw	/*   [ IN ] Current transaction width */
+    ) {
+	if (tw & dmacHw_REG_CTL_SRC_TR_WIDTH_MASK) {
+		return ((tw >> dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT) -
+			 1) << dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT;
+	} else if (tw & dmacHw_REG_CTL_DST_TR_WIDTH_MASK) {
+		return ((tw >> dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT) -
+			 1) << dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT;
+	}
+
+	/* Default return  */
+	return dmacHw_SRC_TRANSACTION_WIDTH_8;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get number of bytes per transaction
+*
+*  @return  Number of bytes per transaction
+*
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+static inline int dmacHw_GetTrWidthInBytes(dmacHw_TRANSACTION_WIDTH_e tw	/*   [ IN ]  Transaction width */
+    ) {
+	int width = 1;
+	switch (tw) {
+	case dmacHw_SRC_TRANSACTION_WIDTH_8:
+		width = 1;
+		break;
+	case dmacHw_SRC_TRANSACTION_WIDTH_16:
+	case dmacHw_DST_TRANSACTION_WIDTH_16:
+		width = 2;
+		break;
+	case dmacHw_SRC_TRANSACTION_WIDTH_32:
+	case dmacHw_DST_TRANSACTION_WIDTH_32:
+		width = 4;
+		break;
+	case dmacHw_SRC_TRANSACTION_WIDTH_64:
+	case dmacHw_DST_TRANSACTION_WIDTH_64:
+		width = 8;
+		break;
+	default:
+		dmacHw_ASSERT(0);
+	}
+
+	/* Default transaction width */
+	return width;
+}
+
+#endif /* _DMACHW_PRIV_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
new file mode 100644
index 00000000000..891cea87e33
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
@@ -0,0 +1,406 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    dmacHw_reg.h
+*
+*  @brief   Definitions for low level DMA registers
+*
+*/
+/****************************************************************************/
+
+#ifndef _DMACHW_REG_H
+#define _DMACHW_REG_H
+
+#include <csp/stdint.h>
+#include <mach/csp/mm_io.h>
+
+/* Data type for 64 bit little endian register */
+typedef struct {
+	volatile uint32_t lo;	/* Lower 32 bit in little endian mode */
+	volatile uint32_t hi;	/* Upper 32 bit in little endian mode */
+} dmacHw_REG64_t;
+
+/* Data type representing DMA channel registers */
+typedef struct {
+	dmacHw_REG64_t ChannelSar;	/*  Source Adress Register. 64 bits (upper 32 bits are reserved)
+					   Address must be aligned to CTLx.SRC_TR_WIDTH.
+					 */
+	dmacHw_REG64_t ChannelDar;	/*  Destination Address Register.64 bits (upper 32 bits are reserved)
+					   Address must be aligned to CTLx.DST_TR_WIDTH.
+					 */
+	dmacHw_REG64_t ChannelLlp;	/*  Link List Pointer.64 bits (upper 32 bits are reserved)
+					   LLP contains the pointer to the next LLI for block chaining using linked lists.
+					   If LLPis set to 0x0, then transfers using linked lists are not enabled.
+					   Address MUST be aligned to a 32-bit boundary.
+					 */
+	dmacHw_REG64_t ChannelCtl;	/* Control Register. 64 bits */
+	dmacHw_REG64_t ChannelSstat;	/* Source Status Register */
+	dmacHw_REG64_t ChannelDstat;	/* Destination Status Register */
+	dmacHw_REG64_t ChannelSstatAddr;	/* Source Status Address Register */
+	dmacHw_REG64_t ChannelDstatAddr;	/* Destination Status Address Register */
+	dmacHw_REG64_t ChannelConfig;	/* Channel Configuration Register */
+	dmacHw_REG64_t SrcGather;	/* Source gather register */
+	dmacHw_REG64_t DstScatter;	/* Destination scatter register */
+} dmacHw_CH_REG_t;
+
+/* Data type for RAW interrupt status registers */
+typedef struct {
+	dmacHw_REG64_t RawTfr;	/* Raw Status for IntTfr Interrupt */
+	dmacHw_REG64_t RawBlock;	/* Raw Status for IntBlock Interrupt */
+	dmacHw_REG64_t RawSrcTran;	/* Raw Status for IntSrcTran Interrupt */
+	dmacHw_REG64_t RawDstTran;	/* Raw Status for IntDstTran Interrupt */
+	dmacHw_REG64_t RawErr;	/* Raw Status for IntErr Interrupt */
+} dmacHw_INT_RAW_t;
+
+/* Data type for interrupt status registers */
+typedef struct {
+	dmacHw_REG64_t StatusTfr;	/* Status for IntTfr Interrupt */
+	dmacHw_REG64_t StatusBlock;	/* Status for IntBlock Interrupt */
+	dmacHw_REG64_t StatusSrcTran;	/* Status for IntSrcTran Interrupt */
+	dmacHw_REG64_t StatusDstTran;	/* Status for IntDstTran Interrupt */
+	dmacHw_REG64_t StatusErr;	/* Status for IntErr Interrupt */
+} dmacHw_INT_STATUS_t;
+
+/* Data type for interrupt mask registers*/
+typedef struct {
+	dmacHw_REG64_t MaskTfr;	/* Mask for IntTfr Interrupt */
+	dmacHw_REG64_t MaskBlock;	/* Mask for IntBlock Interrupt */
+	dmacHw_REG64_t MaskSrcTran;	/* Mask for IntSrcTran Interrupt */
+	dmacHw_REG64_t MaskDstTran;	/* Mask for IntDstTran Interrupt */
+	dmacHw_REG64_t MaskErr;	/* Mask for IntErr Interrupt */
+} dmacHw_INT_MASK_t;
+
+/* Data type for interrupt clear registers */
+typedef struct {
+	dmacHw_REG64_t ClearTfr;	/* Clear for IntTfr Interrupt */
+	dmacHw_REG64_t ClearBlock;	/* Clear for IntBlock Interrupt */
+	dmacHw_REG64_t ClearSrcTran;	/* Clear for IntSrcTran Interrupt */
+	dmacHw_REG64_t ClearDstTran;	/* Clear for IntDstTran Interrupt */
+	dmacHw_REG64_t ClearErr;	/* Clear for IntErr Interrupt */
+	dmacHw_REG64_t StatusInt;	/* Status for each interrupt type */
+} dmacHw_INT_CLEAR_t;
+
+/* Data type for software handshaking registers */
+typedef struct {
+	dmacHw_REG64_t ReqSrcReg;	/* Source Software Transaction Request Register */
+	dmacHw_REG64_t ReqDstReg;	/* Destination Software Transaction Request Register */
+	dmacHw_REG64_t SglReqSrcReg;	/* Single Source Transaction Request Register */
+	dmacHw_REG64_t SglReqDstReg;	/* Single Destination Transaction Request Register */
+	dmacHw_REG64_t LstSrcReg;	/* Last Source Transaction Request Register */
+	dmacHw_REG64_t LstDstReg;	/* Last Destination Transaction Request Register */
+} dmacHw_SW_HANDSHAKE_t;
+
+/* Data type for misc. registers */
+typedef struct {
+	dmacHw_REG64_t DmaCfgReg;	/* DMA Configuration Register */
+	dmacHw_REG64_t ChEnReg;	/* DMA Channel Enable Register */
+	dmacHw_REG64_t DmaIdReg;	/* DMA ID Register */
+	dmacHw_REG64_t DmaTestReg;	/* DMA Test Register */
+	dmacHw_REG64_t Reserved0;	/* Reserved */
+	dmacHw_REG64_t Reserved1;	/* Reserved */
+	dmacHw_REG64_t CompParm6;	/* Component Parameter 6 */
+	dmacHw_REG64_t CompParm5;	/* Component Parameter 5 */
+	dmacHw_REG64_t CompParm4;	/* Component Parameter 4 */
+	dmacHw_REG64_t CompParm3;	/* Component Parameter 3 */
+	dmacHw_REG64_t CompParm2;	/* Component Parameter 2 */
+	dmacHw_REG64_t CompParm1;	/* Component Parameter 1 */
+	dmacHw_REG64_t CompId;	/* Compoent ID */
+} dmacHw_MISC_t;
+
+/* Base registers */
+#define dmacHw_0_MODULE_BASE_ADDR        (char *) MM_IO_BASE_DMA0	/* DMAC 0 module's base address */
+#define dmacHw_1_MODULE_BASE_ADDR        (char *) MM_IO_BASE_DMA1	/* DMAC 1 module's base address */
+
+extern uint32_t dmaChannelCount_0;
+extern uint32_t dmaChannelCount_1;
+
+/* Define channel specific registers */
+#define dmacHw_CHAN_BASE(module, chan)          ((dmacHw_CH_REG_t *) ((char *)((module) ? dmacHw_1_MODULE_BASE_ADDR : dmacHw_0_MODULE_BASE_ADDR) + ((chan) * sizeof(dmacHw_CH_REG_t))))
+
+/* Raw interrupt status registers */
+#define dmacHw_REG_INT_RAW_BASE(module)         ((char *)dmacHw_CHAN_BASE((module), ((module) ? dmaChannelCount_1 : dmaChannelCount_0)))
+#define dmacHw_REG_INT_RAW_TRAN(module)         (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawTfr.lo)
+#define dmacHw_REG_INT_RAW_BLOCK(module)        (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawBlock.lo)
+#define dmacHw_REG_INT_RAW_STRAN(module)        (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawSrcTran.lo)
+#define dmacHw_REG_INT_RAW_DTRAN(module)        (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawDstTran.lo)
+#define dmacHw_REG_INT_RAW_ERROR(module)        (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawErr.lo)
+
+/* Interrupt status registers */
+#define dmacHw_REG_INT_STAT_BASE(module)        ((char *)(dmacHw_REG_INT_RAW_BASE((module)) + sizeof(dmacHw_INT_RAW_t)))
+#define dmacHw_REG_INT_STAT_TRAN(module)        (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusTfr.lo)
+#define dmacHw_REG_INT_STAT_BLOCK(module)       (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusBlock.lo)
+#define dmacHw_REG_INT_STAT_STRAN(module)       (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusSrcTran.lo)
+#define dmacHw_REG_INT_STAT_DTRAN(module)       (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusDstTran.lo)
+#define dmacHw_REG_INT_STAT_ERROR(module)       (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusErr.lo)
+
+/* Interrupt status registers */
+#define dmacHw_REG_INT_MASK_BASE(module)        ((char *)(dmacHw_REG_INT_STAT_BASE((module)) + sizeof(dmacHw_INT_STATUS_t)))
+#define dmacHw_REG_INT_MASK_TRAN(module)        (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskTfr.lo)
+#define dmacHw_REG_INT_MASK_BLOCK(module)       (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskBlock.lo)
+#define dmacHw_REG_INT_MASK_STRAN(module)       (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskSrcTran.lo)
+#define dmacHw_REG_INT_MASK_DTRAN(module)       (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskDstTran.lo)
+#define dmacHw_REG_INT_MASK_ERROR(module)       (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskErr.lo)
+
+/* Interrupt clear registers */
+#define dmacHw_REG_INT_CLEAR_BASE(module)       ((char *)(dmacHw_REG_INT_MASK_BASE((module)) + sizeof(dmacHw_INT_MASK_t)))
+#define dmacHw_REG_INT_CLEAR_TRAN(module)       (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearTfr.lo)
+#define dmacHw_REG_INT_CLEAR_BLOCK(module)      (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearBlock.lo)
+#define dmacHw_REG_INT_CLEAR_STRAN(module)      (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearSrcTran.lo)
+#define dmacHw_REG_INT_CLEAR_DTRAN(module)      (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearDstTran.lo)
+#define dmacHw_REG_INT_CLEAR_ERROR(module)      (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearErr.lo)
+#define dmacHw_REG_INT_STATUS(module)           (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->StatusInt.lo)
+
+/* Software handshaking registers */
+#define dmacHw_REG_SW_HS_BASE(module)           ((char *)(dmacHw_REG_INT_CLEAR_BASE((module)) + sizeof(dmacHw_INT_CLEAR_t)))
+#define dmacHw_REG_SW_HS_SRC_REQ(module)        (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->ReqSrcReg.lo)
+#define dmacHw_REG_SW_HS_DST_REQ(module)        (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->ReqDstReg.lo)
+#define dmacHw_REG_SW_HS_SRC_SGL_REQ(module)    (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->SglReqSrcReg.lo)
+#define dmacHw_REG_SW_HS_DST_SGL_REQ(module)    (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->SglReqDstReg.lo)
+#define dmacHw_REG_SW_HS_SRC_LST_REQ(module)    (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->LstSrcReg.lo)
+#define dmacHw_REG_SW_HS_DST_LST_REQ(module)    (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->LstDstReg.lo)
+
+/* Miscellaneous registers */
+#define dmacHw_REG_MISC_BASE(module)            ((char *)(dmacHw_REG_SW_HS_BASE((module)) + sizeof(dmacHw_SW_HANDSHAKE_t)))
+#define dmacHw_REG_MISC_CFG(module)             (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaCfgReg.lo)
+#define dmacHw_REG_MISC_CH_ENABLE(module)       (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->ChEnReg.lo)
+#define dmacHw_REG_MISC_ID(module)              (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaIdReg.lo)
+#define dmacHw_REG_MISC_TEST(module)            (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaTestReg.lo)
+#define dmacHw_REG_MISC_COMP_PARAM1_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm1.lo)
+#define dmacHw_REG_MISC_COMP_PARAM1_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm1.hi)
+#define dmacHw_REG_MISC_COMP_PARAM2_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm2.lo)
+#define dmacHw_REG_MISC_COMP_PARAM2_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm2.hi)
+#define dmacHw_REG_MISC_COMP_PARAM3_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm3.lo)
+#define dmacHw_REG_MISC_COMP_PARAM3_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm3.hi)
+#define dmacHw_REG_MISC_COMP_PARAM4_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm4.lo)
+#define dmacHw_REG_MISC_COMP_PARAM4_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm4.hi)
+#define dmacHw_REG_MISC_COMP_PARAM5_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm5.lo)
+#define dmacHw_REG_MISC_COMP_PARAM5_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm5.hi)
+#define dmacHw_REG_MISC_COMP_PARAM6_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm6.lo)
+#define dmacHw_REG_MISC_COMP_PARAM6_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm6.hi)
+
+/* Channel control registers */
+#define dmacHw_REG_SAR(module, chan)            (dmacHw_CHAN_BASE((module), (chan))->ChannelSar.lo)
+#define dmacHw_REG_DAR(module, chan)            (dmacHw_CHAN_BASE((module), (chan))->ChannelDar.lo)
+#define dmacHw_REG_LLP(module, chan)            (dmacHw_CHAN_BASE((module), (chan))->ChannelLlp.lo)
+
+#define dmacHw_REG_CTL_LO(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->ChannelCtl.lo)
+#define dmacHw_REG_CTL_HI(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->ChannelCtl.hi)
+
+#define dmacHw_REG_SSTAT(module, chan)          (dmacHw_CHAN_BASE((module), (chan))->ChannelSstat.lo)
+#define dmacHw_REG_DSTAT(module, chan)          (dmacHw_CHAN_BASE((module), (chan))->ChannelDstat.lo)
+#define dmacHw_REG_SSTATAR(module, chan)        (dmacHw_CHAN_BASE((module), (chan))->ChannelSstatAddr.lo)
+#define dmacHw_REG_DSTATAR(module, chan)        (dmacHw_CHAN_BASE((module), (chan))->ChannelDstatAddr.lo)
+
+#define dmacHw_REG_CFG_LO(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->ChannelConfig.lo)
+#define dmacHw_REG_CFG_HI(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->ChannelConfig.hi)
+
+#define dmacHw_REG_SGR_LO(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->SrcGather.lo)
+#define dmacHw_REG_SGR_HI(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->SrcGather.hi)
+
+#define dmacHw_REG_DSR_LO(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->DstScatter.lo)
+#define dmacHw_REG_DSR_HI(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->DstScatter.hi)
+
+#define INT_STATUS_MASK(channel)                (0x00000001 << (channel))
+#define CHANNEL_BUSY(mod, channel)              (dmacHw_REG_MISC_CH_ENABLE((mod)) & (0x00000001 << (channel)))
+
+/* Bit mask for REG_DMACx_CTL_LO */
+
+#define dmacHw_REG_CTL_INT_EN                       0x00000001	/* Channel interrupt enable */
+
+#define dmacHw_REG_CTL_DST_TR_WIDTH_MASK            0x0000000E	/* Destination transaction width mask */
+#define dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT           1
+#define dmacHw_REG_CTL_DST_TR_WIDTH_8               0x00000000	/* Destination transaction width 8 bit */
+#define dmacHw_REG_CTL_DST_TR_WIDTH_16              0x00000002	/* Destination transaction width 16 bit */
+#define dmacHw_REG_CTL_DST_TR_WIDTH_32              0x00000004	/* Destination transaction width 32 bit */
+#define dmacHw_REG_CTL_DST_TR_WIDTH_64              0x00000006	/* Destination transaction width 64 bit */
+
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_MASK            0x00000070	/* Source transaction width mask */
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT           4
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_8               0x00000000	/* Source transaction width 8 bit */
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_16              0x00000010	/* Source transaction width 16 bit */
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_32              0x00000020	/* Source transaction width 32 bit */
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_64              0x00000030	/* Source transaction width 64 bit */
+
+#define dmacHw_REG_CTL_DS_ENABLE                    0x00040000	/* Destination scatter enable */
+#define dmacHw_REG_CTL_SG_ENABLE                    0x00020000	/* Source gather enable */
+
+#define dmacHw_REG_CTL_DINC_MASK                    0x00000180	/* Destination address inc/dec mask */
+#define dmacHw_REG_CTL_DINC_INC                     0x00000000	/* Destination address increment */
+#define dmacHw_REG_CTL_DINC_DEC                     0x00000080	/* Destination address decrement */
+#define dmacHw_REG_CTL_DINC_NC                      0x00000100	/* Destination address no change */
+
+#define dmacHw_REG_CTL_SINC_MASK                    0x00000600	/* Source address inc/dec mask */
+#define dmacHw_REG_CTL_SINC_INC                     0x00000000	/* Source address increment */
+#define dmacHw_REG_CTL_SINC_DEC                     0x00000200	/* Source address decrement */
+#define dmacHw_REG_CTL_SINC_NC                      0x00000400	/* Source address no change */
+
+#define dmacHw_REG_CTL_DST_MSIZE_MASK               0x00003800	/* Destination burst transaction length */
+#define dmacHw_REG_CTL_DST_MSIZE_0                  0x00000000	/* No Destination burst */
+#define dmacHw_REG_CTL_DST_MSIZE_4                  0x00000800	/* Destination burst transaction length 4 */
+#define dmacHw_REG_CTL_DST_MSIZE_8                  0x00001000	/* Destination burst transaction length 8 */
+#define dmacHw_REG_CTL_DST_MSIZE_16                 0x00001800	/* Destination burst transaction length 16 */
+
+#define dmacHw_REG_CTL_SRC_MSIZE_MASK               0x0001C000	/* Source burst transaction length */
+#define dmacHw_REG_CTL_SRC_MSIZE_0                  0x00000000	/* No Source burst */
+#define dmacHw_REG_CTL_SRC_MSIZE_4                  0x00004000	/* Source burst transaction length 4 */
+#define dmacHw_REG_CTL_SRC_MSIZE_8                  0x00008000	/* Source burst transaction length 8 */
+#define dmacHw_REG_CTL_SRC_MSIZE_16                 0x0000C000	/* Source burst transaction length 16 */
+
+#define dmacHw_REG_CTL_TTFC_MASK                    0x00700000	/* Transfer type and flow controller */
+#define dmacHw_REG_CTL_TTFC_MM_DMAC                 0x00000000	/* Memory to Memory with DMAC as flow controller */
+#define dmacHw_REG_CTL_TTFC_MP_DMAC                 0x00100000	/* Memory to Peripheral with DMAC as flow controller */
+#define dmacHw_REG_CTL_TTFC_PM_DMAC                 0x00200000	/* Peripheral to Memory with DMAC as flow controller */
+#define dmacHw_REG_CTL_TTFC_PP_DMAC                 0x00300000	/* Peripheral to Peripheral with DMAC as flow controller */
+#define dmacHw_REG_CTL_TTFC_PM_PERI                 0x00400000	/* Peripheral to Memory with Peripheral as flow controller */
+#define dmacHw_REG_CTL_TTFC_PP_SPERI                0x00500000	/* Peripheral to Peripheral with Source Peripheral as flow controller */
+#define dmacHw_REG_CTL_TTFC_MP_PERI                 0x00600000	/* Memory to Peripheral with Peripheral as flow controller */
+#define dmacHw_REG_CTL_TTFC_PP_DPERI                0x00700000	/* Peripheral to Peripheral with Destination Peripheral as flow controller */
+
+#define dmacHw_REG_CTL_DMS_MASK                     0x01800000	/* Destination AHB master interface */
+#define dmacHw_REG_CTL_DMS_1                        0x00000000	/* Destination AHB master interface 1 */
+#define dmacHw_REG_CTL_DMS_2                        0x00800000	/* Destination AHB master interface 2 */
+
+#define dmacHw_REG_CTL_SMS_MASK                     0x06000000	/* Source AHB master interface */
+#define dmacHw_REG_CTL_SMS_1                        0x00000000	/* Source AHB master interface 1 */
+#define dmacHw_REG_CTL_SMS_2                        0x02000000	/* Source AHB master interface 2 */
+
+#define dmacHw_REG_CTL_LLP_DST_EN                   0x08000000	/* Block chaining enable for destination side */
+#define dmacHw_REG_CTL_LLP_SRC_EN                   0x10000000	/* Block chaining enable for source side */
+
+/* Bit mask for REG_DMACx_CTL_HI */
+#define dmacHw_REG_CTL_BLOCK_TS_MASK                0x00000FFF	/* Block transfer size */
+#define dmacHw_REG_CTL_DONE                         0x00001000	/* Block trasnfer done */
+
+/* Bit mask for REG_DMACx_CFG_LO */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_SHIFT                  5	/* Channel priority shift */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_MASK          0x000000E0	/* Channel priority mask */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_0             0x00000000	/* Channel priority 0 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_1             0x00000020	/* Channel priority 1 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_2             0x00000040	/* Channel priority 2 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_3             0x00000060	/* Channel priority 3 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_4             0x00000080	/* Channel priority 4 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_5             0x000000A0	/* Channel priority 5 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_6             0x000000C0	/* Channel priority 6 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_7             0x000000E0	/* Channel priority 7 */
+
+#define dmacHw_REG_CFG_LO_CH_SUSPEND                0x00000100	/* Channel suspend */
+#define dmacHw_REG_CFG_LO_CH_FIFO_EMPTY             0x00000200	/* Channel FIFO empty */
+#define dmacHw_REG_CFG_LO_DST_CH_SW_HS              0x00000400	/* Destination channel SW handshaking */
+#define dmacHw_REG_CFG_LO_SRC_CH_SW_HS              0x00000800	/* Source channel SW handshaking */
+
+#define dmacHw_REG_CFG_LO_CH_LOCK_MASK              0x00003000	/* Channel locking mask */
+#define dmacHw_REG_CFG_LO_CH_LOCK_DMA               0x00000000	/* Channel lock over the entire DMA transfer operation */
+#define dmacHw_REG_CFG_LO_CH_LOCK_BLOCK             0x00001000	/* Channel lock over the block transfer operation */
+#define dmacHw_REG_CFG_LO_CH_LOCK_TRANS             0x00002000	/* Channel lock over the transaction */
+#define dmacHw_REG_CFG_LO_CH_LOCK_ENABLE            0x00010000	/* Channel lock enable */
+
+#define dmacHw_REG_CFG_LO_BUS_LOCK_MASK             0x0000C000	/* Bus locking mask */
+#define dmacHw_REG_CFG_LO_BUS_LOCK_DMA              0x00000000	/* Bus lock over the entire DMA transfer operation */
+#define dmacHw_REG_CFG_LO_BUS_LOCK_BLOCK            0x00004000	/* Bus lock over the block transfer operation */
+#define dmacHw_REG_CFG_LO_BUS_LOCK_TRANS            0x00008000	/* Bus lock over the transaction */
+#define dmacHw_REG_CFG_LO_BUS_LOCK_ENABLE           0x00020000	/* Bus lock enable */
+
+#define dmacHw_REG_CFG_LO_DST_HS_POLARITY_LOW       0x00040000	/* Destination channel handshaking signal polarity low */
+#define dmacHw_REG_CFG_LO_SRC_HS_POLARITY_LOW       0x00080000	/* Source channel handshaking signal polarity low */
+
+#define dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK   0x3FF00000	/* Maximum AMBA burst length */
+
+#define dmacHw_REG_CFG_LO_AUTO_RELOAD_SRC           0x40000000	/* Source address auto reload */
+#define dmacHw_REG_CFG_LO_AUTO_RELOAD_DST           0x80000000	/* Destination address auto reload */
+
+/* Bit mask for REG_DMACx_CFG_HI */
+#define dmacHw_REG_CFG_HI_FC_DST_READY              0x00000001	/* Source transaction request is serviced when destination is ready */
+#define dmacHw_REG_CFG_HI_FIFO_ENOUGH               0x00000002	/* Initiate burst transaction when enough data in available in FIFO */
+
+#define dmacHw_REG_CFG_HI_AHB_HPROT_MASK            0x0000001C	/* AHB protection mask */
+#define dmacHw_REG_CFG_HI_AHB_HPROT_1               0x00000004	/* AHB protection 1 */
+#define dmacHw_REG_CFG_HI_AHB_HPROT_2               0x00000008	/* AHB protection 2 */
+#define dmacHw_REG_CFG_HI_AHB_HPROT_3               0x00000010	/* AHB protection 3 */
+
+#define dmacHw_REG_CFG_HI_UPDATE_DST_STAT           0x00000020	/* Destination status update enable */
+#define dmacHw_REG_CFG_HI_UPDATE_SRC_STAT           0x00000040	/* Source status update enable */
+
+#define dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK        0x00000780	/* Source peripheral hardware interface mask */
+#define dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK        0x00007800	/* Destination peripheral hardware interface mask */
+
+/* DMA Configuration Parameters */
+#define dmacHw_REG_COMP_PARAM_NUM_CHANNELS          0x00000700	/* Number of channels */
+#define dmacHw_REG_COMP_PARAM_NUM_INTERFACE         0x00001800	/* Number of master interface */
+#define dmacHw_REG_COMP_PARAM_MAX_BLK_SIZE          0x0000000f	/* Maximum brust size */
+#define dmacHw_REG_COMP_PARAM_DATA_WIDTH            0x00006000	/* Data transfer width */
+
+/* Define GET/SET macros to program the registers */
+#define dmacHw_SET_SAR(module, channel, addr)          (dmacHw_REG_SAR((module), (channel)) = (uint32_t) (addr))
+#define dmacHw_SET_DAR(module, channel, addr)          (dmacHw_REG_DAR((module), (channel)) = (uint32_t) (addr))
+#define dmacHw_SET_LLP(module, channel, ptr)           (dmacHw_REG_LLP((module), (channel)) = (uint32_t) (ptr))
+
+#define dmacHw_GET_SSTAT(module, channel)              (dmacHw_REG_SSTAT((module), (channel)))
+#define dmacHw_GET_DSTAT(module, channel)              (dmacHw_REG_DSTAT((module), (channel)))
+
+#define dmacHw_SET_SSTATAR(module, channel, addr)      (dmacHw_REG_SSTATAR((module), (channel)) = (uint32_t) (addr))
+#define dmacHw_SET_DSTATAR(module, channel, addr)      (dmacHw_REG_DSTATAR((module), (channel)) = (uint32_t) (addr))
+
+#define dmacHw_SET_CONTROL_LO(module, channel, ctl)    (dmacHw_REG_CTL_LO((module), (channel)) |= (ctl))
+#define dmacHw_RESET_CONTROL_LO(module, channel)       (dmacHw_REG_CTL_LO((module), (channel)) = 0)
+#define dmacHw_GET_CONTROL_LO(module, channel)         (dmacHw_REG_CTL_LO((module), (channel)))
+
+#define dmacHw_SET_CONTROL_HI(module, channel, ctl)    (dmacHw_REG_CTL_HI((module), (channel)) |= (ctl))
+#define dmacHw_RESET_CONTROL_HI(module, channel)       (dmacHw_REG_CTL_HI((module), (channel)) = 0)
+#define dmacHw_GET_CONTROL_HI(module, channel)         (dmacHw_REG_CTL_HI((module), (channel)))
+
+#define dmacHw_GET_BLOCK_SIZE(module, channel)         (dmacHw_REG_CTL_HI((module), (channel)) & dmacHw_REG_CTL_BLOCK_TS_MASK)
+#define dmacHw_DMA_COMPLETE(module, channel)           (dmacHw_REG_CTL_HI((module), (channel)) & dmacHw_REG_CTL_DONE)
+
+#define dmacHw_SET_CONFIG_LO(module, channel, cfg)     (dmacHw_REG_CFG_LO((module), (channel)) |= (cfg))
+#define dmacHw_RESET_CONFIG_LO(module, channel)        (dmacHw_REG_CFG_LO((module), (channel)) = 0)
+#define dmacHw_GET_CONFIG_LO(module, channel)          (dmacHw_REG_CFG_LO((module), (channel)))
+#define dmacHw_SET_AMBA_BUSRT_LEN(module, channel, len)    (dmacHw_REG_CFG_LO((module), (channel)) = (dmacHw_REG_CFG_LO((module), (channel)) & ~(dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK)) | (((len) << 20) & dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK))
+#define dmacHw_SET_CHANNEL_PRIORITY(module, channel, prio) (dmacHw_REG_CFG_LO((module), (channel)) = (dmacHw_REG_CFG_LO((module), (channel)) & ~(dmacHw_REG_CFG_LO_CH_PRIORITY_MASK)) | (prio))
+#define dmacHw_SET_AHB_HPROT(module, channel, protect)  (dmacHw_REG_CFG_HI(module, channel) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_AHB_HPROT_MASK)) | (protect))
+
+#define dmacHw_SET_CONFIG_HI(module, channel, cfg)      (dmacHw_REG_CFG_HI((module), (channel)) |= (cfg))
+#define dmacHw_RESET_CONFIG_HI(module, channel)         (dmacHw_REG_CFG_HI((module), (channel)) = 0)
+#define dmacHw_GET_CONFIG_HI(module, channel)           (dmacHw_REG_CFG_HI((module), (channel)))
+#define dmacHw_SET_SRC_PERI_INTF(module, channel, intf) (dmacHw_REG_CFG_HI((module), (channel)) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK)) | (((intf) << 7) & dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK))
+#define dmacHw_SRC_PERI_INTF(intf)                      (((intf) << 7) & dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK)
+#define dmacHw_SET_DST_PERI_INTF(module, channel, intf) (dmacHw_REG_CFG_HI((module), (channel)) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK)) | (((intf) << 11) & dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK))
+#define dmacHw_DST_PERI_INTF(intf)                      (((intf) << 11) & dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK)
+
+#define dmacHw_DMA_START(module, channel)              (dmacHw_REG_MISC_CH_ENABLE((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
+#define dmacHw_DMA_STOP(module, channel)               (dmacHw_REG_MISC_CH_ENABLE((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_DMA_ENABLE(module)                      (dmacHw_REG_MISC_CFG((module)) = 1)
+#define dmacHw_DMA_DISABLE(module)                     (dmacHw_REG_MISC_CFG((module)) = 0)
+
+#define dmacHw_TRAN_INT_ENABLE(module, channel)        (dmacHw_REG_INT_MASK_TRAN((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
+#define dmacHw_BLOCK_INT_ENABLE(module, channel)       (dmacHw_REG_INT_MASK_BLOCK((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
+#define dmacHw_ERROR_INT_ENABLE(module, channel)       (dmacHw_REG_INT_MASK_ERROR((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
+
+#define dmacHw_TRAN_INT_DISABLE(module, channel)       (dmacHw_REG_INT_MASK_TRAN((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_BLOCK_INT_DISABLE(module, channel)      (dmacHw_REG_INT_MASK_BLOCK((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_ERROR_INT_DISABLE(module, channel)      (dmacHw_REG_INT_MASK_ERROR((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_STRAN_INT_DISABLE(module, channel)      (dmacHw_REG_INT_MASK_STRAN((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_DTRAN_INT_DISABLE(module, channel)      (dmacHw_REG_INT_MASK_DTRAN((module)) = (0x00000001 << ((channel) + 8)))
+
+#define dmacHw_TRAN_INT_CLEAR(module, channel)         (dmacHw_REG_INT_CLEAR_TRAN((module)) = (0x00000001 << (channel)))
+#define dmacHw_BLOCK_INT_CLEAR(module, channel)        (dmacHw_REG_INT_CLEAR_BLOCK((module)) = (0x00000001 << (channel)))
+#define dmacHw_ERROR_INT_CLEAR(module, channel)        (dmacHw_REG_INT_CLEAR_ERROR((module)) = (0x00000001 << (channel)))
+
+#define dmacHw_GET_NUM_CHANNEL(module)                 (((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_NUM_CHANNELS) >> 8) + 1)
+#define dmacHw_GET_NUM_INTERFACE(module)               (((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_NUM_INTERFACE) >> 11) + 1)
+#define dmacHw_GET_MAX_BLOCK_SIZE(module, channel)     ((dmacHw_REG_MISC_COMP_PARAM1_LO((module)) >> (4 * (channel))) & dmacHw_REG_COMP_PARAM_MAX_BLK_SIZE)
+#define dmacHw_GET_CHANNEL_DATA_WIDTH(module, channel) ((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_DATA_WIDTH) >> 13)
+
+#endif /* _DMACHW_REG_H */
-- 
cgit v1.2.3


From cf2ddacb567e85f40241f67b240fa445db7a424d Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:08:00 +0100
Subject: ARM: 5659/1: bcmring: add csp dmac source files

add csp dmac source files

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/csp/dmac/Makefile       |    1 +
 arch/arm/mach-bcmring/csp/dmac/dmacHw.c       |  917 ++++++++++++++++++++++
 arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c | 1017 +++++++++++++++++++++++++
 3 files changed, 1935 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/csp/dmac/Makefile
 create mode 100644 arch/arm/mach-bcmring/csp/dmac/dmacHw.c
 create mode 100644 arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c

(limited to 'arch/arm')

diff --git a/arch/arm/mach-bcmring/csp/dmac/Makefile b/arch/arm/mach-bcmring/csp/dmac/Makefile
new file mode 100644
index 00000000000..fb1104fe56b
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/dmac/Makefile
@@ -0,0 +1 @@
+obj-y += dmacHw.o dmacHw_extra.o
\ No newline at end of file
diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw.c
new file mode 100644
index 00000000000..7b9bac2d79a
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw.c
@@ -0,0 +1,917 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    dmacHw.c
+*
+*  @brief   Low level DMA controller driver routines
+*
+*  @note
+*
+*   These routines provide basic DMA functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <csp/stdint.h>
+#include <csp/string.h>
+#include <stddef.h>
+
+#include <csp/dmacHw.h>
+#include <mach/csp/dmacHw_reg.h>
+#include <mach/csp/dmacHw_priv.h>
+#include <mach/csp/chipcHw_inline.h>
+
+/* ---- External Function Prototypes ------------------------------------- */
+
+/* Allocate DMA control blocks */
+dmacHw_CBLK_t dmacHw_gCblk[dmacHw_MAX_CHANNEL_COUNT];
+
+uint32_t dmaChannelCount_0 = dmacHw_MAX_CHANNEL_COUNT / 2;
+uint32_t dmaChannelCount_1 = dmacHw_MAX_CHANNEL_COUNT / 2;
+
+/****************************************************************************/
+/**
+*  @brief   Get maximum FIFO for a DMA channel
+*
+*  @return  Maximum allowable FIFO size
+*
+*
+*/
+/****************************************************************************/
+static uint32_t GetFifoSize(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle */
+    ) {
+	uint32_t val = 0;
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+	dmacHw_MISC_t *pMiscReg =
+	    (dmacHw_MISC_t *) dmacHw_REG_MISC_BASE(pCblk->module);
+
+	switch (pCblk->channel) {
+	case 0:
+		val = (pMiscReg->CompParm2.lo & 0x70000000) >> 28;
+		break;
+	case 1:
+		val = (pMiscReg->CompParm3.hi & 0x70000000) >> 28;
+		break;
+	case 2:
+		val = (pMiscReg->CompParm3.lo & 0x70000000) >> 28;
+		break;
+	case 3:
+		val = (pMiscReg->CompParm4.hi & 0x70000000) >> 28;
+		break;
+	case 4:
+		val = (pMiscReg->CompParm4.lo & 0x70000000) >> 28;
+		break;
+	case 5:
+		val = (pMiscReg->CompParm5.hi & 0x70000000) >> 28;
+		break;
+	case 6:
+		val = (pMiscReg->CompParm5.lo & 0x70000000) >> 28;
+		break;
+	case 7:
+		val = (pMiscReg->CompParm6.hi & 0x70000000) >> 28;
+		break;
+	}
+
+	if (val <= 0x4) {
+		return 8 << val;
+	} else {
+		dmacHw_ASSERT(0);
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Program channel register to initiate transfer
+*
+*  @return  void
+*
+*
+*  @note
+*     - Descriptor buffer MUST ALWAYS be flushed before calling this function
+*     - This function should also be called from ISR to program the channel with
+*       pending descriptors
+*/
+/****************************************************************************/
+void dmacHw_initiateTransfer(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
+			     dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+			     void *pDescriptor	/*   [ IN ] Descriptor buffer */
+    ) {
+	dmacHw_DESC_RING_t *pRing;
+	dmacHw_DESC_t *pProg;
+	dmacHw_CBLK_t *pCblk;
+
+	pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+	pRing = dmacHw_GET_DESC_RING(pDescriptor);
+
+	if (CHANNEL_BUSY(pCblk->module, pCblk->channel)) {
+		/* Not safe yet to program the channel */
+		return;
+	}
+
+	if (pCblk->varDataStarted) {
+		if (pCblk->descUpdated) {
+			pCblk->descUpdated = 0;
+			pProg =
+			    (dmacHw_DESC_t *) ((uint32_t)
+					       dmacHw_REG_LLP(pCblk->module,
+							      pCblk->channel) +
+					       pRing->virt2PhyOffset);
+
+			/* Load descriptor if not loaded */
+			if (!(pProg->ctl.hi & dmacHw_REG_CTL_DONE)) {
+				dmacHw_SET_SAR(pCblk->module, pCblk->channel,
+					       pProg->sar);
+				dmacHw_SET_DAR(pCblk->module, pCblk->channel,
+					       pProg->dar);
+				dmacHw_REG_CTL_LO(pCblk->module,
+						  pCblk->channel) =
+				    pProg->ctl.lo;
+				dmacHw_REG_CTL_HI(pCblk->module,
+						  pCblk->channel) =
+				    pProg->ctl.hi;
+			} else if (pProg == (dmacHw_DESC_t *) pRing->pEnd->llp) {
+				/* Return as end descriptor is processed */
+				return;
+			} else {
+				dmacHw_ASSERT(0);
+			}
+		} else {
+			return;
+		}
+	} else {
+		if (pConfig->transferMode == dmacHw_TRANSFER_MODE_PERIODIC) {
+			/* Do not make a single chain, rather process one descriptor at a time */
+			pProg = pRing->pHead;
+			/* Point to the next descriptor for next iteration */
+			dmacHw_NEXT_DESC(pRing, pHead);
+		} else {
+			/* Return if no more pending descriptor */
+			if (pRing->pEnd == NULL) {
+				return;
+			}
+
+			pProg = pRing->pProg;
+			if (pConfig->transferMode ==
+			    dmacHw_TRANSFER_MODE_CONTINUOUS) {
+				/* Make sure a complete ring can be formed */
+				dmacHw_ASSERT((dmacHw_DESC_t *) pRing->pEnd->
+					      llp == pRing->pProg);
+				/* Make sure pProg pointing to the pHead */
+				dmacHw_ASSERT((dmacHw_DESC_t *) pRing->pProg ==
+					      pRing->pHead);
+				/* Make a complete ring */
+				do {
+					pRing->pProg->ctl.lo |=
+					    (dmacHw_REG_CTL_LLP_DST_EN |
+					     dmacHw_REG_CTL_LLP_SRC_EN);
+					pRing->pProg =
+					    (dmacHw_DESC_t *) pRing->pProg->llp;
+				} while (pRing->pProg != pRing->pHead);
+			} else {
+				/* Make a single long chain */
+				while (pRing->pProg != pRing->pEnd) {
+					pRing->pProg->ctl.lo |=
+					    (dmacHw_REG_CTL_LLP_DST_EN |
+					     dmacHw_REG_CTL_LLP_SRC_EN);
+					pRing->pProg =
+					    (dmacHw_DESC_t *) pRing->pProg->llp;
+				}
+			}
+		}
+
+		/* Program the channel registers */
+		dmacHw_SET_SAR(pCblk->module, pCblk->channel, pProg->sar);
+		dmacHw_SET_DAR(pCblk->module, pCblk->channel, pProg->dar);
+		dmacHw_SET_LLP(pCblk->module, pCblk->channel,
+			       (uint32_t) pProg - pRing->virt2PhyOffset);
+		dmacHw_REG_CTL_LO(pCblk->module, pCblk->channel) =
+		    pProg->ctl.lo;
+		dmacHw_REG_CTL_HI(pCblk->module, pCblk->channel) =
+		    pProg->ctl.hi;
+		if (pRing->pEnd) {
+			/* Remember the descriptor to use next */
+			pRing->pProg = (dmacHw_DESC_t *) pRing->pEnd->llp;
+		}
+		/* Indicate no more pending descriptor  */
+		pRing->pEnd = (dmacHw_DESC_t *) NULL;
+	}
+	/* Start DMA operation */
+	dmacHw_DMA_START(pCblk->module, pCblk->channel);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Initializes DMA
+*
+*  This function initializes DMA CSP driver
+*
+*  @note
+*     Must be called before using any DMA channel
+*/
+/****************************************************************************/
+void dmacHw_initDma(void)
+{
+
+	uint32_t i = 0;
+
+	dmaChannelCount_0 = dmacHw_GET_NUM_CHANNEL(0);
+	dmaChannelCount_1 = dmacHw_GET_NUM_CHANNEL(1);
+
+	/* Enable access to the DMA block */
+	chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_DMAC0);
+	chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_DMAC1);
+
+	if ((dmaChannelCount_0 + dmaChannelCount_1) > dmacHw_MAX_CHANNEL_COUNT) {
+		dmacHw_ASSERT(0);
+	}
+
+	memset((void *)dmacHw_gCblk, 0,
+	       sizeof(dmacHw_CBLK_t) * (dmaChannelCount_0 + dmaChannelCount_1));
+	for (i = 0; i < dmaChannelCount_0; i++) {
+		dmacHw_gCblk[i].module = 0;
+		dmacHw_gCblk[i].channel = i;
+	}
+	for (i = 0; i < dmaChannelCount_1; i++) {
+		dmacHw_gCblk[i + dmaChannelCount_0].module = 1;
+		dmacHw_gCblk[i + dmaChannelCount_0].channel = i;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Exit function for  DMA
+*
+*  This function isolates DMA from the system
+*
+*/
+/****************************************************************************/
+void dmacHw_exitDma(void)
+{
+	/* Disable access to the DMA block */
+	chipcHw_busInterfaceClockDisable(chipcHw_REG_BUS_CLOCK_DMAC0);
+	chipcHw_busInterfaceClockDisable(chipcHw_REG_BUS_CLOCK_DMAC1);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Gets a handle to a DMA channel
+*
+*  This function returns a handle, representing a control block of a particular DMA channel
+*
+*  @return  -1       - On Failure
+*            handle  - On Success, representing a channel control block
+*
+*  @note
+*     None  Channel ID must be created using "dmacHw_MAKE_CHANNEL_ID" macro
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getChannelHandle(dmacHw_ID_t channelId	/* [ IN ] DMA Channel Id */
+    ) {
+	int idx;
+
+	switch ((channelId >> 8)) {
+	case 0:
+		dmacHw_ASSERT((channelId & 0xff) < dmaChannelCount_0);
+		idx = (channelId & 0xff);
+		break;
+	case 1:
+		dmacHw_ASSERT((channelId & 0xff) < dmaChannelCount_1);
+		idx = dmaChannelCount_0 + (channelId & 0xff);
+		break;
+	default:
+		dmacHw_ASSERT(0);
+		return (dmacHw_HANDLE_t) -1;
+	}
+
+	return dmacHw_CBLK_TO_HANDLE(&dmacHw_gCblk[idx]);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Initializes a DMA channel for use
+*
+*  This function initializes and resets a DMA channel for use
+*
+*  @return  -1     - On Failure
+*            0     - On Success
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+int dmacHw_initChannel(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+	int module = pCblk->module;
+	int channel = pCblk->channel;
+
+	/* Reinitialize the control block */
+	memset((void *)pCblk, 0, sizeof(dmacHw_CBLK_t));
+	pCblk->module = module;
+	pCblk->channel = channel;
+
+	/* Enable DMA controller */
+	dmacHw_DMA_ENABLE(pCblk->module);
+	/* Reset DMA channel */
+	dmacHw_RESET_CONTROL_LO(pCblk->module, pCblk->channel);
+	dmacHw_RESET_CONTROL_HI(pCblk->module, pCblk->channel);
+	dmacHw_RESET_CONFIG_LO(pCblk->module, pCblk->channel);
+	dmacHw_RESET_CONFIG_HI(pCblk->module, pCblk->channel);
+
+	/* Clear all raw interrupt status */
+	dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel);
+	dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel);
+	dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel);
+
+	/* Mask event specific interrupts */
+	dmacHw_TRAN_INT_DISABLE(pCblk->module, pCblk->channel);
+	dmacHw_BLOCK_INT_DISABLE(pCblk->module, pCblk->channel);
+	dmacHw_STRAN_INT_DISABLE(pCblk->module, pCblk->channel);
+	dmacHw_DTRAN_INT_DISABLE(pCblk->module, pCblk->channel);
+	dmacHw_ERROR_INT_DISABLE(pCblk->module, pCblk->channel);
+
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief  Finds amount of memory required to form a descriptor ring
+*
+*
+*  @return   Number of bytes required to form a descriptor ring
+*
+*
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorLen(uint32_t descCnt	/* [ IN ] Number of descriptor in the ring */
+    ) {
+	/* Need extra 4 byte to ensure 32 bit alignment  */
+	return (descCnt * sizeof(dmacHw_DESC_t)) + sizeof(dmacHw_DESC_RING_t) +
+		sizeof(uint32_t);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Initializes descriptor ring
+*
+*  This function will initializes the descriptor ring of a DMA channel
+*
+*
+*  @return   -1 - On failure
+*             0 - On success
+*  @note
+*     - "len" parameter should be obtained from "dmacHw_descriptorLen"
+*     - Descriptor buffer MUST be 32 bit aligned and uncached as it is
+*       accessed by ARM and DMA
+*/
+/****************************************************************************/
+int dmacHw_initDescriptor(void *pDescriptorVirt,	/*  [ IN ] Virtual address of uncahced buffer allocated to form descriptor ring */
+			  uint32_t descriptorPhyAddr,	/*  [ IN ] Physical address of pDescriptorVirt (descriptor buffer) */
+			  uint32_t len,	/*  [ IN ] Size of the pBuf */
+			  uint32_t num	/*  [ IN ] Number of descriptor in the ring */
+    ) {
+	uint32_t i;
+	dmacHw_DESC_RING_t *pRing;
+	dmacHw_DESC_t *pDesc;
+
+	/* Check the alignment of the descriptor */
+	if ((uint32_t) pDescriptorVirt & 0x00000003) {
+		dmacHw_ASSERT(0);
+		return -1;
+	}
+
+	/* Check if enough space has been allocated for descriptor ring */
+	if (len < dmacHw_descriptorLen(num)) {
+		return -1;
+	}
+
+	pRing = dmacHw_GET_DESC_RING(pDescriptorVirt);
+	pRing->pHead =
+	    (dmacHw_DESC_t *) ((uint32_t) pRing + sizeof(dmacHw_DESC_RING_t));
+	pRing->pFree = pRing->pTail = pRing->pEnd = pRing->pHead;
+	pRing->pProg = dmacHw_DESC_INIT;
+	/* Initialize link item chain, starting from the head */
+	pDesc = pRing->pHead;
+	/* Find the offset between virtual to physical address */
+	pRing->virt2PhyOffset = (uint32_t) pDescriptorVirt - descriptorPhyAddr;
+
+	/* Form the descriptor ring */
+	for (i = 0; i < num - 1; i++) {
+		/* Clear link list item */
+		memset((void *)pDesc, 0, sizeof(dmacHw_DESC_t));
+		/* Point to the next item in the physical address */
+		pDesc->llpPhy = (uint32_t) (pDesc + 1) - pRing->virt2PhyOffset;
+		/* Point to the next item in the virtual address */
+		pDesc->llp = (uint32_t) (pDesc + 1);
+		/* Mark descriptor is ready to use */
+		pDesc->ctl.hi = dmacHw_DESC_FREE;
+		/* Look into next link list item */
+		pDesc++;
+	}
+
+	/* Clear last link list item */
+	memset((void *)pDesc, 0, sizeof(dmacHw_DESC_t));
+	/* Last item pointing to the first item in the
+	   physical address to complete the ring */
+	pDesc->llpPhy = (uint32_t) pRing->pHead - pRing->virt2PhyOffset;
+	/* Last item pointing to the first item in the
+	   virtual address to complete the ring
+	 */
+	pDesc->llp = (uint32_t) pRing->pHead;
+	/* Mark descriptor is ready to use */
+	pDesc->ctl.hi = dmacHw_DESC_FREE;
+	/* Set the number of descriptors in the ring */
+	pRing->num = num;
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Configure DMA channel
+*
+*  @return  0  : On success
+*           -1 : On failure
+*/
+/****************************************************************************/
+int dmacHw_configChannel(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
+			 dmacHw_CONFIG_t *pConfig	/*   [ IN ] Configuration settings */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+	uint32_t cfgHigh = 0;
+	int srcTrSize;
+	int dstTrSize;
+
+	pCblk->varDataStarted = 0;
+	pCblk->userData = NULL;
+
+	/* Configure
+	   - Burst transaction when enough data in available in FIFO
+	   - AHB Access protection 1
+	   - Source and destination peripheral ports
+	 */
+	cfgHigh =
+	    dmacHw_REG_CFG_HI_FIFO_ENOUGH | dmacHw_REG_CFG_HI_AHB_HPROT_1 |
+	    dmacHw_SRC_PERI_INTF(pConfig->
+				 srcPeripheralPort) |
+	    dmacHw_DST_PERI_INTF(pConfig->dstPeripheralPort);
+	/* Set priority */
+	dmacHw_SET_CHANNEL_PRIORITY(pCblk->module, pCblk->channel,
+				    pConfig->channelPriority);
+
+	if (pConfig->dstStatusRegisterAddress != 0) {
+		/* Destination status update enable */
+		cfgHigh |= dmacHw_REG_CFG_HI_UPDATE_DST_STAT;
+		/* Configure status registers */
+		dmacHw_SET_DSTATAR(pCblk->module, pCblk->channel,
+				   pConfig->dstStatusRegisterAddress);
+	}
+
+	if (pConfig->srcStatusRegisterAddress != 0) {
+		/* Source status update enable */
+		cfgHigh |= dmacHw_REG_CFG_HI_UPDATE_SRC_STAT;
+		/* Source status update enable */
+		dmacHw_SET_SSTATAR(pCblk->module, pCblk->channel,
+				   pConfig->srcStatusRegisterAddress);
+	}
+	/* Configure the config high register */
+	dmacHw_GET_CONFIG_HI(pCblk->module, pCblk->channel) = cfgHigh;
+
+	/* Clear all raw interrupt status */
+	dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel);
+	dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel);
+	dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel);
+
+	/* Configure block interrupt */
+	if (pConfig->blockTransferInterrupt == dmacHw_INTERRUPT_ENABLE) {
+		dmacHw_BLOCK_INT_ENABLE(pCblk->module, pCblk->channel);
+	} else {
+		dmacHw_BLOCK_INT_DISABLE(pCblk->module, pCblk->channel);
+	}
+	/* Configure complete transfer interrupt */
+	if (pConfig->completeTransferInterrupt == dmacHw_INTERRUPT_ENABLE) {
+		dmacHw_TRAN_INT_ENABLE(pCblk->module, pCblk->channel);
+	} else {
+		dmacHw_TRAN_INT_DISABLE(pCblk->module, pCblk->channel);
+	}
+	/* Configure error interrupt */
+	if (pConfig->errorInterrupt == dmacHw_INTERRUPT_ENABLE) {
+		dmacHw_ERROR_INT_ENABLE(pCblk->module, pCblk->channel);
+	} else {
+		dmacHw_ERROR_INT_DISABLE(pCblk->module, pCblk->channel);
+	}
+	/* Configure gather register */
+	if (pConfig->srcGatherWidth) {
+		srcTrSize =
+		    dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
+		if (!
+		    ((pConfig->srcGatherWidth % srcTrSize)
+		     && (pConfig->srcGatherJump % srcTrSize))) {
+			dmacHw_REG_SGR_LO(pCblk->module, pCblk->channel) =
+			    ((pConfig->srcGatherWidth /
+			      srcTrSize) << 20) | (pConfig->srcGatherJump /
+						   srcTrSize);
+		} else {
+			return -1;
+		}
+	}
+	/* Configure scatter register */
+	if (pConfig->dstScatterWidth) {
+		dstTrSize =
+		    dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth);
+		if (!
+		    ((pConfig->dstScatterWidth % dstTrSize)
+		     && (pConfig->dstScatterJump % dstTrSize))) {
+			dmacHw_REG_DSR_LO(pCblk->module, pCblk->channel) =
+			    ((pConfig->dstScatterWidth /
+			      dstTrSize) << 20) | (pConfig->dstScatterJump /
+						   dstTrSize);
+		} else {
+			return -1;
+		}
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Indicates whether DMA transfer is in progress or completed
+*
+*  @return   DMA transfer status
+*          dmacHw_TRANSFER_STATUS_BUSY:         DMA Transfer ongoing
+*          dmacHw_TRANSFER_STATUS_DONE:         DMA Transfer completed
+*          dmacHw_TRANSFER_STATUS_ERROR:        DMA Transfer error
+*
+*/
+/****************************************************************************/
+dmacHw_TRANSFER_STATUS_e dmacHw_transferCompleted(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+	if (CHANNEL_BUSY(pCblk->module, pCblk->channel)) {
+		return dmacHw_TRANSFER_STATUS_BUSY;
+	} else if (dmacHw_REG_INT_RAW_ERROR(pCblk->module) &
+		   (0x00000001 << pCblk->channel)) {
+		return dmacHw_TRANSFER_STATUS_ERROR;
+	}
+
+	return dmacHw_TRANSFER_STATUS_DONE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set descriptors for known data length
+*
+*  When DMA has to work as a flow controller, this function prepares the
+*  descriptor chain to transfer data
+*
+*  from:
+*          - Memory to memory
+*          - Peripheral to memory
+*          - Memory to Peripheral
+*          - Peripheral to Peripheral
+*
+*  @return   -1 - On failure
+*             0 - On success
+*
+*/
+/****************************************************************************/
+int dmacHw_setDataDescriptor(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+			     void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+			     void *pSrcAddr,	/*   [ IN ] Source (Peripheral/Memory) address */
+			     void *pDstAddr,	/*   [ IN ] Destination (Peripheral/Memory) address */
+			     size_t dataLen	/*   [ IN ] Data length in bytes */
+    ) {
+	dmacHw_TRANSACTION_WIDTH_e dstTrWidth;
+	dmacHw_TRANSACTION_WIDTH_e srcTrWidth;
+	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+	dmacHw_DESC_t *pStart;
+	dmacHw_DESC_t *pProg;
+	int srcTs = 0;
+	int blkTs = 0;
+	int oddSize = 0;
+	int descCount = 0;
+	int count = 0;
+	int dstTrSize = 0;
+	int srcTrSize = 0;
+	uint32_t maxBlockSize = dmacHw_MAX_BLOCKSIZE;
+
+	dstTrSize = dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth);
+	srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
+
+	/* Skip Tx if buffer is NULL  or length is unknown */
+	if ((pSrcAddr == NULL) || (pDstAddr == NULL) || (dataLen == 0)) {
+		/* Do not initiate transfer */
+		return -1;
+	}
+
+	/* Ensure scatter and gather are transaction aligned */
+	if ((pConfig->srcGatherWidth % srcTrSize)
+	    || (pConfig->dstScatterWidth % dstTrSize)) {
+		return -2;
+	}
+
+	/*
+	   Background 1: DMAC can not perform DMA if source and destination addresses are
+	   not properly aligned with the channel's transaction width. So, for successful
+	   DMA transfer, transaction width must be set according to the alignment of the
+	   source and destination address.
+	 */
+
+	/* Adjust destination transaction width if destination address is not aligned properly */
+	dstTrWidth = pConfig->dstMaxTransactionWidth;
+	while (dmacHw_ADDRESS_MASK(dstTrSize) & (uint32_t) pDstAddr) {
+		dstTrWidth = dmacHw_GetNextTrWidth(dstTrWidth);
+		dstTrSize = dmacHw_GetTrWidthInBytes(dstTrWidth);
+	}
+
+	/* Adjust source transaction width if source address is not aligned properly */
+	srcTrWidth = pConfig->srcMaxTransactionWidth;
+	while (dmacHw_ADDRESS_MASK(srcTrSize) & (uint32_t) pSrcAddr) {
+		srcTrWidth = dmacHw_GetNextTrWidth(srcTrWidth);
+		srcTrSize = dmacHw_GetTrWidthInBytes(srcTrWidth);
+	}
+
+	/* Find the maximum transaction per descriptor */
+	if (pConfig->maxDataPerBlock
+	    && ((pConfig->maxDataPerBlock / srcTrSize) <
+		dmacHw_MAX_BLOCKSIZE)) {
+		maxBlockSize = pConfig->maxDataPerBlock / srcTrSize;
+	}
+
+	/* Find number of source transactions needed to complete the DMA transfer */
+	srcTs = dataLen / srcTrSize;
+	/* Find the odd number of bytes that need to be transferred as single byte transaction width */
+	if (srcTs && (dstTrSize > srcTrSize)) {
+		oddSize = dataLen % dstTrSize;
+		/* Adjust source transaction count due to "oddSize" */
+		srcTs = srcTs - (oddSize / srcTrSize);
+	} else {
+		oddSize = dataLen % srcTrSize;
+	}
+	/* Adjust "descCount" due to "oddSize" */
+	if (oddSize) {
+		descCount++;
+	}
+	/* Find the number of descriptor needed for total "srcTs" */
+	if (srcTs) {
+		descCount += ((srcTs - 1) / maxBlockSize) + 1;
+	}
+
+	/* Check the availability of "descCount" discriptors in the ring */
+	pProg = pRing->pHead;
+	for (count = 0; (descCount <= pRing->num) && (count < descCount);
+	     count++) {
+		if ((pProg->ctl.hi & dmacHw_DESC_FREE) == 0) {
+			/* Sufficient descriptors are not available */
+			return -3;
+		}
+		pProg = (dmacHw_DESC_t *) pProg->llp;
+	}
+
+	/* Remember the link list item to program the channel registers */
+	pStart = pProg = pRing->pHead;
+	/* Make a link list with "descCount(=count)" number of descriptors */
+	while (count) {
+		/* Reset channel control information */
+		pProg->ctl.lo = 0;
+		/* Enable source gather if configured */
+		if (pConfig->srcGatherWidth) {
+			pProg->ctl.lo |= dmacHw_REG_CTL_SG_ENABLE;
+		}
+		/* Enable destination scatter if configured */
+		if (pConfig->dstScatterWidth) {
+			pProg->ctl.lo |= dmacHw_REG_CTL_DS_ENABLE;
+		}
+		/* Set source and destination address */
+		pProg->sar = (uint32_t) pSrcAddr;
+		pProg->dar = (uint32_t) pDstAddr;
+		/* Use "devCtl" to mark that user memory need to be freed later if needed */
+		if (pProg == pRing->pHead) {
+			pProg->devCtl = dmacHw_FREE_USER_MEMORY;
+		} else {
+			pProg->devCtl = 0;
+		}
+
+		blkTs = srcTs;
+
+		/* Special treatmeant for last descriptor */
+		if (count == 1) {
+			/* Mark the last descriptor */
+			pProg->ctl.lo &=
+			    ~(dmacHw_REG_CTL_LLP_DST_EN |
+			      dmacHw_REG_CTL_LLP_SRC_EN);
+			/* Treatment for odd data bytes */
+			if (oddSize) {
+				/* Adjust for single byte transaction width */
+				switch (pConfig->transferType) {
+				case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
+					dstTrWidth =
+					    dmacHw_DST_TRANSACTION_WIDTH_8;
+					blkTs =
+					    (oddSize / srcTrSize) +
+					    ((oddSize % srcTrSize) ? 1 : 0);
+					break;
+				case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
+					srcTrWidth =
+					    dmacHw_SRC_TRANSACTION_WIDTH_8;
+					blkTs = oddSize;
+					break;
+				case dmacHw_TRANSFER_TYPE_MEM_TO_MEM:
+					srcTrWidth =
+					    dmacHw_SRC_TRANSACTION_WIDTH_8;
+					dstTrWidth =
+					    dmacHw_DST_TRANSACTION_WIDTH_8;
+					blkTs = oddSize;
+					break;
+				case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL:
+					/* Do not adjust the transaction width  */
+					break;
+				}
+			} else {
+				srcTs -= blkTs;
+			}
+		} else {
+			if (srcTs / maxBlockSize) {
+				blkTs = maxBlockSize;
+			}
+			/* Remaining source transactions for next iteration */
+			srcTs -= blkTs;
+		}
+		/* Must have a valid source transactions */
+		dmacHw_ASSERT(blkTs > 0);
+		/* Set control information */
+		if (pConfig->flowControler == dmacHw_FLOW_CONTROL_DMA) {
+			pProg->ctl.lo |= pConfig->transferType |
+			    pConfig->srcUpdate |
+			    pConfig->dstUpdate |
+			    srcTrWidth |
+			    dstTrWidth |
+			    pConfig->srcMaxBurstWidth |
+			    pConfig->dstMaxBurstWidth |
+			    pConfig->srcMasterInterface |
+			    pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN;
+		} else {
+			uint32_t transferType = 0;
+			switch (pConfig->transferType) {
+			case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
+				transferType = dmacHw_REG_CTL_TTFC_PM_PERI;
+				break;
+			case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
+				transferType = dmacHw_REG_CTL_TTFC_MP_PERI;
+				break;
+			default:
+				dmacHw_ASSERT(0);
+			}
+			pProg->ctl.lo |= transferType |
+			    pConfig->srcUpdate |
+			    pConfig->dstUpdate |
+			    srcTrWidth |
+			    dstTrWidth |
+			    pConfig->srcMaxBurstWidth |
+			    pConfig->dstMaxBurstWidth |
+			    pConfig->srcMasterInterface |
+			    pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN;
+		}
+
+		/* Set block transaction size */
+		pProg->ctl.hi = blkTs & dmacHw_REG_CTL_BLOCK_TS_MASK;
+		/* Look for next descriptor */
+		if (count > 1) {
+			/* Point to the next descriptor */
+			pProg = (dmacHw_DESC_t *) pProg->llp;
+
+			/* Update source and destination address for next iteration */
+			switch (pConfig->transferType) {
+			case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
+				if (pConfig->dstScatterWidth) {
+					pDstAddr =
+					    (char *)pDstAddr +
+					    blkTs * srcTrSize +
+					    (((blkTs * srcTrSize) /
+					      pConfig->dstScatterWidth) *
+					     pConfig->dstScatterJump);
+				} else {
+					pDstAddr =
+					    (char *)pDstAddr +
+					    blkTs * srcTrSize;
+				}
+				break;
+			case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
+				if (pConfig->srcGatherWidth) {
+					pSrcAddr =
+					    (char *)pDstAddr +
+					    blkTs * srcTrSize +
+					    (((blkTs * srcTrSize) /
+					      pConfig->srcGatherWidth) *
+					     pConfig->srcGatherJump);
+				} else {
+					pSrcAddr =
+					    (char *)pSrcAddr +
+					    blkTs * srcTrSize;
+				}
+				break;
+			case dmacHw_TRANSFER_TYPE_MEM_TO_MEM:
+				if (pConfig->dstScatterWidth) {
+					pDstAddr =
+					    (char *)pDstAddr +
+					    blkTs * srcTrSize +
+					    (((blkTs * srcTrSize) /
+					      pConfig->dstScatterWidth) *
+					     pConfig->dstScatterJump);
+				} else {
+					pDstAddr =
+					    (char *)pDstAddr +
+					    blkTs * srcTrSize;
+				}
+
+				if (pConfig->srcGatherWidth) {
+					pSrcAddr =
+					    (char *)pDstAddr +
+					    blkTs * srcTrSize +
+					    (((blkTs * srcTrSize) /
+					      pConfig->srcGatherWidth) *
+					     pConfig->srcGatherJump);
+				} else {
+					pSrcAddr =
+					    (char *)pSrcAddr +
+					    blkTs * srcTrSize;
+				}
+				break;
+			case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL:
+				/* Do not adjust the address */
+				break;
+			default:
+				dmacHw_ASSERT(0);
+			}
+		} else {
+			/* At the end of transfer "srcTs" must be zero */
+			dmacHw_ASSERT(srcTs == 0);
+		}
+		count--;
+	}
+
+	/* Remember the descriptor to initialize the registers */
+	if (pRing->pProg == dmacHw_DESC_INIT) {
+		pRing->pProg = pStart;
+	}
+	/* Indicate that the descriptor is updated */
+	pRing->pEnd = pProg;
+	/* Head pointing to the next descriptor */
+	pRing->pHead = (dmacHw_DESC_t *) pProg->llp;
+	/* Update Tail pointer if destination is a peripheral,
+	   because no one is going to read from the pTail
+	 */
+	if (!dmacHw_DST_IS_MEMORY(pConfig->transferType)) {
+		pRing->pTail = pRing->pHead;
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Provides DMA controller attributes
+*
+*
+*  @return  DMA controller attributes
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle,	/*  [ IN ]  DMA Channel handle */
+					  dmacHw_CONTROLLER_ATTRIB_e attr	/*  [ IN ]  DMA Controler attribute of type  dmacHw_CONTROLLER_ATTRIB_e */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+	switch (attr) {
+	case dmacHw_CONTROLLER_ATTRIB_CHANNEL_NUM:
+		return dmacHw_GET_NUM_CHANNEL(pCblk->module);
+	case dmacHw_CONTROLLER_ATTRIB_CHANNEL_MAX_BLOCK_SIZE:
+		return (1 <<
+			 (dmacHw_GET_MAX_BLOCK_SIZE
+			  (pCblk->module, pCblk->module) + 2)) - 8;
+	case dmacHw_CONTROLLER_ATTRIB_MASTER_INTF_NUM:
+		return dmacHw_GET_NUM_INTERFACE(pCblk->module);
+	case dmacHw_CONTROLLER_ATTRIB_CHANNEL_BUS_WIDTH:
+		return 32 << dmacHw_GET_CHANNEL_DATA_WIDTH(pCblk->module,
+							   pCblk->channel);
+	case dmacHw_CONTROLLER_ATTRIB_CHANNEL_FIFO_SIZE:
+		return GetFifoSize(handle);
+	}
+	dmacHw_ASSERT(0);
+	return 0;
+}
diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
new file mode 100644
index 00000000000..ff7b436d093
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
@@ -0,0 +1,1017 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    dmacHw_extra.c
+*
+*  @brief   Extra Low level DMA controller driver routines
+*
+*  @note
+*
+*   These routines provide basic DMA functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/stdint.h>
+#include <stddef.h>
+
+#include <csp/dmacHw.h>
+#include <mach/csp/dmacHw_reg.h>
+#include <mach/csp/dmacHw_priv.h>
+
+extern dmacHw_CBLK_t dmacHw_gCblk[dmacHw_MAX_CHANNEL_COUNT];	/* Declared in dmacHw.c */
+
+/* ---- External Function Prototypes ------------------------------------- */
+
+/* ---- Internal Use Function Prototypes --------------------------------- */
+/****************************************************************************/
+/**
+*  @brief   Overwrites data length in the descriptor
+*
+*  This function overwrites data length in the descriptor
+*
+*
+*  @return   void
+*
+*  @note
+*          This is only used for PCM channel
+*/
+/****************************************************************************/
+void dmacHw_setDataLength(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+			  void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+			  size_t dataLen	/*   [ IN ] Data length in bytes */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Helper function to display DMA registers
+*
+*  @return  void
+*
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+static void DisplayRegisterContents(int module,	/*   [ IN ] DMA Controller unit  (0-1) */
+				    int channel,	/*   [ IN ] DMA Channel          (0-7) / -1(all) */
+				    int (*fpPrint) (const char *, ...)	/*   [ IN ] Callback to the print function */
+    ) {
+	int chan;
+
+	(*fpPrint) ("Displaying register content \n\n");
+	(*fpPrint) ("Module %d: Interrupt raw transfer              0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_RAW_TRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt raw block                 0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_RAW_BLOCK(module)));
+	(*fpPrint) ("Module %d: Interrupt raw src transfer          0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_RAW_STRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt raw dst transfer          0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_RAW_DTRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt raw error                 0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_RAW_ERROR(module)));
+	(*fpPrint) ("--------------------------------------------------\n");
+	(*fpPrint) ("Module %d: Interrupt stat transfer             0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_STAT_TRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt stat block                0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_STAT_BLOCK(module)));
+	(*fpPrint) ("Module %d: Interrupt stat src transfer         0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_STAT_STRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt stat dst transfer         0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_STAT_DTRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt stat error                0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_STAT_ERROR(module)));
+	(*fpPrint) ("--------------------------------------------------\n");
+	(*fpPrint) ("Module %d: Interrupt mask transfer             0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_MASK_TRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt mask block                0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_MASK_BLOCK(module)));
+	(*fpPrint) ("Module %d: Interrupt mask src transfer         0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_MASK_STRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt mask dst transfer         0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_MASK_DTRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt mask error                0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_MASK_ERROR(module)));
+	(*fpPrint) ("--------------------------------------------------\n");
+	(*fpPrint) ("Module %d: Interrupt clear transfer            0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_CLEAR_TRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt clear block               0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_CLEAR_BLOCK(module)));
+	(*fpPrint) ("Module %d: Interrupt clear src transfer        0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_CLEAR_STRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt clear dst transfer        0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_CLEAR_DTRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt clear error               0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_CLEAR_ERROR(module)));
+	(*fpPrint) ("--------------------------------------------------\n");
+	(*fpPrint) ("Module %d: SW source req                       0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_SW_HS_SRC_REQ(module)));
+	(*fpPrint) ("Module %d: SW dest req                         0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_SW_HS_DST_REQ(module)));
+	(*fpPrint) ("Module %d: SW source signal                    0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_SW_HS_SRC_SGL_REQ(module)));
+	(*fpPrint) ("Module %d: SW dest signal                      0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_SW_HS_DST_SGL_REQ(module)));
+	(*fpPrint) ("Module %d: SW source last                      0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_SW_HS_SRC_LST_REQ(module)));
+	(*fpPrint) ("Module %d: SW dest last                        0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_SW_HS_DST_LST_REQ(module)));
+	(*fpPrint) ("--------------------------------------------------\n");
+	(*fpPrint) ("Module %d: misc config                         0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_MISC_CFG(module)));
+	(*fpPrint) ("Module %d: misc channel enable                 0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_MISC_CH_ENABLE(module)));
+	(*fpPrint) ("Module %d: misc ID                             0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_MISC_ID(module)));
+	(*fpPrint) ("Module %d: misc test                           0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_MISC_TEST(module)));
+
+	if (channel == -1) {
+		for (chan = 0; chan < 8; chan++) {
+			(*fpPrint)
+			    ("--------------------------------------------------\n");
+			(*fpPrint)
+			    ("Module %d: Channel %d Source                   0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_SAR(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Destination              0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_DAR(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d LLP                      0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_LLP(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Control (LO)             0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_CTL_LO(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Control (HI)             0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_CTL_HI(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Source Stats             0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_SSTAT(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Dest Stats               0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_DSTAT(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Source Stats Addr        0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_SSTATAR(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Dest Stats Addr          0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_DSTATAR(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Config (LO)              0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_CFG_LO(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Config (HI)              0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_CFG_HI(module, chan)));
+		}
+	} else {
+		chan = channel;
+		(*fpPrint)
+		    ("--------------------------------------------------\n");
+		(*fpPrint)
+		    ("Module %d: Channel %d Source                   0x%X\n",
+		     module, chan, (uint32_t) (dmacHw_REG_SAR(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Destination              0x%X\n",
+		     module, chan, (uint32_t) (dmacHw_REG_DAR(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d LLP                      0x%X\n",
+		     module, chan, (uint32_t) (dmacHw_REG_LLP(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Control (LO)             0x%X\n",
+		     module, chan,
+		     (uint32_t) (dmacHw_REG_CTL_LO(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Control (HI)             0x%X\n",
+		     module, chan,
+		     (uint32_t) (dmacHw_REG_CTL_HI(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Source Stats             0x%X\n",
+		     module, chan, (uint32_t) (dmacHw_REG_SSTAT(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Dest Stats               0x%X\n",
+		     module, chan, (uint32_t) (dmacHw_REG_DSTAT(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Source Stats Addr        0x%X\n",
+		     module, chan,
+		     (uint32_t) (dmacHw_REG_SSTATAR(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Dest Stats Addr          0x%X\n",
+		     module, chan,
+		     (uint32_t) (dmacHw_REG_DSTATAR(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Config (LO)              0x%X\n",
+		     module, chan,
+		     (uint32_t) (dmacHw_REG_CFG_LO(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Config (HI)              0x%X\n",
+		     module, chan,
+		     (uint32_t) (dmacHw_REG_CFG_HI(module, chan)));
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Helper function to display descriptor ring
+*
+*  @return  void
+*
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+static void DisplayDescRing(void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+			    int (*fpPrint) (const char *, ...)	/*   [ IN ] Callback to the print function */
+    ) {
+	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+	dmacHw_DESC_t *pStart;
+
+	if (pRing->pHead == NULL) {
+		return;
+	}
+
+	pStart = pRing->pHead;
+
+	while ((dmacHw_DESC_t *) pStart->llp != pRing->pHead) {
+		if (pStart == pRing->pHead) {
+			(*fpPrint) ("Head\n");
+		}
+		if (pStart == pRing->pTail) {
+			(*fpPrint) ("Tail\n");
+		}
+		if (pStart == pRing->pProg) {
+			(*fpPrint) ("Prog\n");
+		}
+		if (pStart == pRing->pEnd) {
+			(*fpPrint) ("End\n");
+		}
+		if (pStart == pRing->pFree) {
+			(*fpPrint) ("Free\n");
+		}
+		(*fpPrint) ("0x%X:\n", (uint32_t) pStart);
+		(*fpPrint) ("sar    0x%0X\n", pStart->sar);
+		(*fpPrint) ("dar    0x%0X\n", pStart->dar);
+		(*fpPrint) ("llp    0x%0X\n", pStart->llp);
+		(*fpPrint) ("ctl.lo 0x%0X\n", pStart->ctl.lo);
+		(*fpPrint) ("ctl.hi 0x%0X\n", pStart->ctl.hi);
+		(*fpPrint) ("sstat  0x%0X\n", pStart->sstat);
+		(*fpPrint) ("dstat  0x%0X\n", pStart->dstat);
+		(*fpPrint) ("devCtl 0x%0X\n", pStart->devCtl);
+
+		pStart = (dmacHw_DESC_t *) pStart->llp;
+	}
+	if (pStart == pRing->pHead) {
+		(*fpPrint) ("Head\n");
+	}
+	if (pStart == pRing->pTail) {
+		(*fpPrint) ("Tail\n");
+	}
+	if (pStart == pRing->pProg) {
+		(*fpPrint) ("Prog\n");
+	}
+	if (pStart == pRing->pEnd) {
+		(*fpPrint) ("End\n");
+	}
+	if (pStart == pRing->pFree) {
+		(*fpPrint) ("Free\n");
+	}
+	(*fpPrint) ("0x%X:\n", (uint32_t) pStart);
+	(*fpPrint) ("sar    0x%0X\n", pStart->sar);
+	(*fpPrint) ("dar    0x%0X\n", pStart->dar);
+	(*fpPrint) ("llp    0x%0X\n", pStart->llp);
+	(*fpPrint) ("ctl.lo 0x%0X\n", pStart->ctl.lo);
+	(*fpPrint) ("ctl.hi 0x%0X\n", pStart->ctl.hi);
+	(*fpPrint) ("sstat  0x%0X\n", pStart->sstat);
+	(*fpPrint) ("dstat  0x%0X\n", pStart->dstat);
+	(*fpPrint) ("devCtl 0x%0X\n", pStart->devCtl);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Check if DMA channel is the flow controller
+*
+*  @return  1 : If DMA is a flow controler
+*           0 : Peripheral is the flow controller
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+static inline int DmaIsFlowController(void *pDescriptor	/*   [ IN ] Descriptor buffer */
+    ) {
+	uint32_t ttfc =
+	    (dmacHw_GET_DESC_RING(pDescriptor))->pTail->ctl.
+	    lo & dmacHw_REG_CTL_TTFC_MASK;
+
+	switch (ttfc) {
+	case dmacHw_REG_CTL_TTFC_MM_DMAC:
+	case dmacHw_REG_CTL_TTFC_MP_DMAC:
+	case dmacHw_REG_CTL_TTFC_PM_DMAC:
+	case dmacHw_REG_CTL_TTFC_PP_DMAC:
+		return 1;
+	}
+
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Overwrites data length in the descriptor
+*
+*  This function overwrites data length in the descriptor
+*
+*
+*  @return   void
+*
+*  @note
+*          This is only used for PCM channel
+*/
+/****************************************************************************/
+void dmacHw_setDataLength(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+			  void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+			  size_t dataLen	/*   [ IN ] Data length in bytes */
+    ) {
+	dmacHw_DESC_t *pProg;
+	dmacHw_DESC_t *pHead;
+	int srcTs = 0;
+	int srcTrSize = 0;
+
+	pHead = (dmacHw_GET_DESC_RING(pDescriptor))->pHead;
+	pProg = pHead;
+
+	srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
+	srcTs = dataLen / srcTrSize;
+	do {
+		pProg->ctl.hi = srcTs & dmacHw_REG_CTL_BLOCK_TS_MASK;
+		pProg = (dmacHw_DESC_t *) pProg->llp;
+	} while (pProg != pHead);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Clears the interrupt
+*
+*  This function clears the DMA channel specific interrupt
+*
+*
+*  @return   void
+*
+*  @note
+*     Must be called under the context of ISR
+*/
+/****************************************************************************/
+void dmacHw_clearInterrupt(dmacHw_HANDLE_t handle	/* [ IN ] DMA Channel handle */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+	dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel);
+	dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel);
+	dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Returns the cause of channel specific DMA interrupt
+*
+*  This function returns the cause of interrupt
+*
+*  @return  Interrupt status, each bit representing a specific type of interrupt
+*
+*  @note
+*     Should be called under the context of ISR
+*/
+/****************************************************************************/
+dmacHw_INTERRUPT_STATUS_e dmacHw_getInterruptStatus(dmacHw_HANDLE_t handle	/* [ IN ] DMA Channel handle */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+	dmacHw_INTERRUPT_STATUS_e status = dmacHw_INTERRUPT_STATUS_NONE;
+
+	if (dmacHw_REG_INT_STAT_TRAN(pCblk->module) &
+	    ((0x00000001 << pCblk->channel))) {
+		status |= dmacHw_INTERRUPT_STATUS_TRANS;
+	}
+	if (dmacHw_REG_INT_STAT_BLOCK(pCblk->module) &
+	    ((0x00000001 << pCblk->channel))) {
+		status |= dmacHw_INTERRUPT_STATUS_BLOCK;
+	}
+	if (dmacHw_REG_INT_STAT_ERROR(pCblk->module) &
+	    ((0x00000001 << pCblk->channel))) {
+		status |= dmacHw_INTERRUPT_STATUS_ERROR;
+	}
+
+	return status;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Indentifies a DMA channel causing interrupt
+*
+*  This functions returns a channel causing interrupt of type dmacHw_INTERRUPT_STATUS_e
+*
+*  @return  NULL   : No channel causing DMA interrupt
+*           ! NULL : Handle to a channel causing DMA interrupt
+*  @note
+*     dmacHw_clearInterrupt() must be called with a valid handle after calling this function
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getInterruptSource(void)
+{
+	uint32_t i;
+
+	for (i = 0; i < dmaChannelCount_0 + dmaChannelCount_1; i++) {
+		if ((dmacHw_REG_INT_STAT_TRAN(dmacHw_gCblk[i].module) &
+		     ((0x00000001 << dmacHw_gCblk[i].channel)))
+		    || (dmacHw_REG_INT_STAT_BLOCK(dmacHw_gCblk[i].module) &
+			((0x00000001 << dmacHw_gCblk[i].channel)))
+		    || (dmacHw_REG_INT_STAT_ERROR(dmacHw_gCblk[i].module) &
+			((0x00000001 << dmacHw_gCblk[i].channel)))
+		    ) {
+			return dmacHw_CBLK_TO_HANDLE(&dmacHw_gCblk[i]);
+		}
+	}
+	return dmacHw_CBLK_TO_HANDLE(NULL);
+}
+
+/****************************************************************************/
+/**
+*  @brief  Estimates number of descriptor needed to perform certain DMA transfer
+*
+*
+*  @return  On failure : -1
+*           On success : Number of descriptor count
+*
+*
+*/
+/****************************************************************************/
+int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+				    void *pSrcAddr,	/*   [ IN ] Source (Peripheral/Memory) address */
+				    void *pDstAddr,	/*   [ IN ] Destination (Peripheral/Memory) address */
+				    size_t dataLen	/*   [ IN ] Data length in bytes */
+    ) {
+	int srcTs = 0;
+	int oddSize = 0;
+	int descCount = 0;
+	int dstTrSize = 0;
+	int srcTrSize = 0;
+	uint32_t maxBlockSize = dmacHw_MAX_BLOCKSIZE;
+	dmacHw_TRANSACTION_WIDTH_e dstTrWidth;
+	dmacHw_TRANSACTION_WIDTH_e srcTrWidth;
+
+	dstTrSize = dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth);
+	srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
+
+	/* Skip Tx if buffer is NULL  or length is unknown */
+	if ((pSrcAddr == NULL) || (pDstAddr == NULL) || (dataLen == 0)) {
+		/* Do not initiate transfer */
+		return -1;
+	}
+
+	/* Ensure scatter and gather are transaction aligned */
+	if (pConfig->srcGatherWidth % srcTrSize
+	    || pConfig->dstScatterWidth % dstTrSize) {
+		return -1;
+	}
+
+	/*
+	   Background 1: DMAC can not perform DMA if source and destination addresses are
+	   not properly aligned with the channel's transaction width. So, for successful
+	   DMA transfer, transaction width must be set according to the alignment of the
+	   source and destination address.
+	 */
+
+	/* Adjust destination transaction width if destination address is not aligned properly */
+	dstTrWidth = pConfig->dstMaxTransactionWidth;
+	while (dmacHw_ADDRESS_MASK(dstTrSize) & (uint32_t) pDstAddr) {
+		dstTrWidth = dmacHw_GetNextTrWidth(dstTrWidth);
+		dstTrSize = dmacHw_GetTrWidthInBytes(dstTrWidth);
+	}
+
+	/* Adjust source transaction width if source address is not aligned properly */
+	srcTrWidth = pConfig->srcMaxTransactionWidth;
+	while (dmacHw_ADDRESS_MASK(srcTrSize) & (uint32_t) pSrcAddr) {
+		srcTrWidth = dmacHw_GetNextTrWidth(srcTrWidth);
+		srcTrSize = dmacHw_GetTrWidthInBytes(srcTrWidth);
+	}
+
+	/* Find the maximum transaction per descriptor */
+	if (pConfig->maxDataPerBlock
+	    && ((pConfig->maxDataPerBlock / srcTrSize) <
+		dmacHw_MAX_BLOCKSIZE)) {
+		maxBlockSize = pConfig->maxDataPerBlock / srcTrSize;
+	}
+
+	/* Find number of source transactions needed to complete the DMA transfer */
+	srcTs = dataLen / srcTrSize;
+	/* Find the odd number of bytes that need to be transferred as single byte transaction width */
+	if (srcTs && (dstTrSize > srcTrSize)) {
+		oddSize = dataLen % dstTrSize;
+		/* Adjust source transaction count due to "oddSize" */
+		srcTs = srcTs - (oddSize / srcTrSize);
+	} else {
+		oddSize = dataLen % srcTrSize;
+	}
+	/* Adjust "descCount" due to "oddSize" */
+	if (oddSize) {
+		descCount++;
+	}
+
+	/* Find the number of descriptor needed for total "srcTs" */
+	if (srcTs) {
+		descCount += ((srcTs - 1) / maxBlockSize) + 1;
+	}
+
+	return descCount;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Check the existance of pending descriptor
+*
+*  This function confirmes if there is any pending descriptor in the chain
+*  to program the channel
+*
+*  @return  1 : Channel need to be programmed with pending descriptor
+*           0 : No more pending descriptor to programe the channel
+*
+*  @note
+*     - This function should be called from ISR in case there are pending
+*       descriptor to program the channel.
+*
+*     Example:
+*
+*     dmac_isr ()
+*     {
+*         ...
+*         if (dmacHw_descriptorPending (handle))
+*         {
+*            dmacHw_initiateTransfer (handle);
+*         }
+*     }
+*
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorPending(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
+				  void *pDescriptor	/*   [ IN ] Descriptor buffer */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+
+	/* Make sure channel is not busy */
+	if (!CHANNEL_BUSY(pCblk->module, pCblk->channel)) {
+		/* Check if pEnd is not processed */
+		if (pRing->pEnd) {
+			/* Something left for processing */
+			return 1;
+		}
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Program channel register to stop transfer
+*
+*  Ensures the channel is not doing any transfer after calling this function
+*
+*  @return  void
+*
+*/
+/****************************************************************************/
+void dmacHw_stopTransfer(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle */
+    ) {
+	dmacHw_CBLK_t *pCblk;
+
+	pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+	/* Stop the channel */
+	dmacHw_DMA_STOP(pCblk->module, pCblk->channel);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Deallocates source or destination memory, allocated
+*
+*  This function can be called to deallocate data memory that was DMAed successfully
+*
+*  @return  On failure : -1
+*           On success : Number of buffer freed
+*
+*  @note
+*     This function will be called ONLY, when source OR destination address is pointing
+*     to dynamic memory
+*/
+/****************************************************************************/
+int dmacHw_freeMem(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+		   void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+		   void (*fpFree) (void *)	/*   [ IN ] Function pointer to free data memory */
+    ) {
+	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+	uint32_t count = 0;
+
+	if (fpFree == NULL) {
+		return -1;
+	}
+
+	while ((pRing->pFree != pRing->pTail)
+	       && (pRing->pFree->ctl.lo & dmacHw_DESC_FREE)) {
+		if (pRing->pFree->devCtl == dmacHw_FREE_USER_MEMORY) {
+			/* Identify, which memory to free */
+			if (dmacHw_DST_IS_MEMORY(pConfig->transferType)) {
+				(*fpFree) ((void *)pRing->pFree->dar);
+			} else {
+				/* Destination was a peripheral */
+				(*fpFree) ((void *)pRing->pFree->sar);
+			}
+			/* Unmark user memory to indicate it is freed */
+			pRing->pFree->devCtl = ~dmacHw_FREE_USER_MEMORY;
+		}
+		dmacHw_NEXT_DESC(pRing, pFree);
+
+		count++;
+	}
+
+	return count;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Prepares descriptor ring, when source peripheral working as a flow controller
+*
+*  This function will update the discriptor ring by allocating buffers, when source peripheral
+*  has to work as a flow controller to transfer data from:
+*           - Peripheral to memory.
+*
+*  @return  On failure : -1
+*           On success : Number of descriptor updated
+*
+*
+*  @note
+*     Channel must be configured for peripheral to memory transfer
+*
+*/
+/****************************************************************************/
+int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
+				     dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+				     void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+				     uint32_t srcAddr,	/*   [ IN ] Source peripheral address */
+				     void *(*fpAlloc) (int len),	/*   [ IN ] Function pointer  that provides destination memory */
+				     int len,	/*   [ IN ] Number of bytes "fpAlloc" will allocate for destination */
+				     int num	/*   [ IN ] Number of descriptor to set */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+	dmacHw_DESC_t *pProg = NULL;
+	dmacHw_DESC_t *pLast = NULL;
+	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+	uint32_t dstAddr;
+	uint32_t controlParam;
+	int i;
+
+	dmacHw_ASSERT(pConfig->transferType ==
+		      dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM);
+
+	if (num > pRing->num) {
+		return -1;
+	}
+
+	pLast = pRing->pEnd;	/* Last descriptor updated */
+	pProg = pRing->pHead;	/* First descriptor in the new list */
+
+	controlParam = pConfig->srcUpdate |
+	    pConfig->dstUpdate |
+	    pConfig->srcMaxTransactionWidth |
+	    pConfig->dstMaxTransactionWidth |
+	    pConfig->srcMasterInterface |
+	    pConfig->dstMasterInterface |
+	    pConfig->srcMaxBurstWidth |
+	    pConfig->dstMaxBurstWidth |
+	    dmacHw_REG_CTL_TTFC_PM_PERI |
+	    dmacHw_REG_CTL_LLP_DST_EN |
+	    dmacHw_REG_CTL_LLP_SRC_EN | dmacHw_REG_CTL_INT_EN;
+
+	for (i = 0; i < num; i++) {
+		/* Allocate Rx buffer only for idle descriptor */
+		if (((pRing->pHead->ctl.hi & dmacHw_DESC_FREE) == 0) ||
+		    ((dmacHw_DESC_t *) pRing->pHead->llp == pRing->pTail)
+		    ) {
+			/* Rx descriptor is not idle */
+			break;
+		}
+		/* Set source address */
+		pRing->pHead->sar = srcAddr;
+		if (fpAlloc) {
+			/* Allocate memory for buffer in descriptor */
+			dstAddr = (uint32_t) (*fpAlloc) (len);
+			/* Check the destination address */
+			if (dstAddr == 0) {
+				if (i == 0) {
+					/* Not a single descriptor is available */
+					return -1;
+				}
+				break;
+			}
+			/* Set destination address */
+			pRing->pHead->dar = dstAddr;
+		}
+		/* Set control information */
+		pRing->pHead->ctl.lo = controlParam;
+		/* Use "devCtl" to mark the memory that need to be freed later */
+		pRing->pHead->devCtl = dmacHw_FREE_USER_MEMORY;
+		/* Descriptor is now owned by the channel */
+		pRing->pHead->ctl.hi = 0;
+		/* Remember the descriptor last updated */
+		pRing->pEnd = pRing->pHead;
+		/* Update next descriptor */
+		dmacHw_NEXT_DESC(pRing, pHead);
+	}
+
+	/* Mark the end of the list */
+	pRing->pEnd->ctl.lo &=
+	    ~(dmacHw_REG_CTL_LLP_DST_EN | dmacHw_REG_CTL_LLP_SRC_EN);
+	/* Connect the list */
+	if (pLast != pProg) {
+		pLast->ctl.lo |=
+		    dmacHw_REG_CTL_LLP_DST_EN | dmacHw_REG_CTL_LLP_SRC_EN;
+	}
+	/* Mark the descriptors are updated */
+	pCblk->descUpdated = 1;
+	if (!pCblk->varDataStarted) {
+		/* LLP must be pointing to the first descriptor */
+		dmacHw_SET_LLP(pCblk->module, pCblk->channel,
+			       (uint32_t) pProg - pRing->virt2PhyOffset);
+		/* Channel, handling variable data started */
+		pCblk->varDataStarted = 1;
+	}
+
+	return i;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Read data DMAed to memory
+*
+*  This function will read data that has been DMAed to memory while transfering from:
+*          - Memory to memory
+*          - Peripheral to memory
+*
+*  @param    handle     -
+*  @param    ppBbuf     -
+*  @param    pLen       -
+*
+*  @return  0 - No more data is available to read
+*           1 - More data might be available to read
+*
+*/
+/****************************************************************************/
+int dmacHw_readTransferredData(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle */
+			       dmacHw_CONFIG_t *pConfig,	/*   [ IN ]  Configuration settings */
+			       void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+			       void **ppBbuf,	/*   [ OUT ] Data received */
+			       size_t *pLlen	/*   [ OUT ] Length of the data received */
+    ) {
+	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+
+	(void)handle;
+
+	if (pConfig->transferMode != dmacHw_TRANSFER_MODE_CONTINUOUS) {
+		if (((pRing->pTail->ctl.hi & dmacHw_DESC_FREE) == 0) ||
+		    (pRing->pTail == pRing->pHead)
+		    ) {
+			/* No receive data available */
+			*ppBbuf = (char *)NULL;
+			*pLlen = 0;
+
+			return 0;
+		}
+	}
+
+	/* Return read buffer and length */
+	*ppBbuf = (char *)pRing->pTail->dar;
+
+	/* Extract length of the received data */
+	if (DmaIsFlowController(pDescriptor)) {
+		uint32_t srcTrSize = 0;
+
+		switch (pRing->pTail->ctl.lo & dmacHw_REG_CTL_SRC_TR_WIDTH_MASK) {
+		case dmacHw_REG_CTL_SRC_TR_WIDTH_8:
+			srcTrSize = 1;
+			break;
+		case dmacHw_REG_CTL_SRC_TR_WIDTH_16:
+			srcTrSize = 2;
+			break;
+		case dmacHw_REG_CTL_SRC_TR_WIDTH_32:
+			srcTrSize = 4;
+			break;
+		case dmacHw_REG_CTL_SRC_TR_WIDTH_64:
+			srcTrSize = 8;
+			break;
+		default:
+			dmacHw_ASSERT(0);
+		}
+		/* Calculate length from the block size */
+		*pLlen =
+		    (pRing->pTail->ctl.hi & dmacHw_REG_CTL_BLOCK_TS_MASK) *
+		    srcTrSize;
+	} else {
+		/* Extract length from the source peripheral */
+		*pLlen = pRing->pTail->sstat;
+	}
+
+	/* Advance tail to next descriptor */
+	dmacHw_NEXT_DESC(pRing, pTail);
+
+	return 1;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set descriptor carrying control information
+*
+*  This function will be used to send specific control information to the device
+*  using the DMA channel
+*
+*
+*  @return  -1 - On failure
+*            0 - On success
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+				void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+				uint32_t ctlAddress,	/*   [ IN ] Address of the device control register */
+				uint32_t control	/*   [ IN ] Device control information */
+    ) {
+	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+
+	if (ctlAddress == 0) {
+		return -1;
+	}
+
+	/* Check the availability of descriptors in the ring */
+	if ((pRing->pHead->ctl.hi & dmacHw_DESC_FREE) == 0) {
+		return -1;
+	}
+	/* Set control information */
+	pRing->pHead->devCtl = control;
+	/* Set source and destination address */
+	pRing->pHead->sar = (uint32_t) &pRing->pHead->devCtl;
+	pRing->pHead->dar = ctlAddress;
+	/* Set control parameters */
+	if (pConfig->flowControler == dmacHw_FLOW_CONTROL_DMA) {
+		pRing->pHead->ctl.lo = pConfig->transferType |
+		    dmacHw_SRC_ADDRESS_UPDATE_MODE_INC |
+		    dmacHw_DST_ADDRESS_UPDATE_MODE_INC |
+		    dmacHw_SRC_TRANSACTION_WIDTH_32 |
+		    pConfig->dstMaxTransactionWidth |
+		    dmacHw_SRC_BURST_WIDTH_0 |
+		    dmacHw_DST_BURST_WIDTH_0 |
+		    pConfig->srcMasterInterface |
+		    pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN;
+	} else {
+		uint32_t transferType = 0;
+		switch (pConfig->transferType) {
+		case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
+			transferType = dmacHw_REG_CTL_TTFC_PM_PERI;
+			break;
+		case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
+			transferType = dmacHw_REG_CTL_TTFC_MP_PERI;
+			break;
+		default:
+			dmacHw_ASSERT(0);
+		}
+		pRing->pHead->ctl.lo = transferType |
+		    dmacHw_SRC_ADDRESS_UPDATE_MODE_INC |
+		    dmacHw_DST_ADDRESS_UPDATE_MODE_INC |
+		    dmacHw_SRC_TRANSACTION_WIDTH_32 |
+		    pConfig->dstMaxTransactionWidth |
+		    dmacHw_SRC_BURST_WIDTH_0 |
+		    dmacHw_DST_BURST_WIDTH_0 |
+		    pConfig->srcMasterInterface |
+		    pConfig->dstMasterInterface |
+		    pConfig->flowControler | dmacHw_REG_CTL_INT_EN;
+	}
+
+	/* Set block transaction size to one 32 bit transaction */
+	pRing->pHead->ctl.hi = dmacHw_REG_CTL_BLOCK_TS_MASK & 1;
+
+	/* Remember the descriptor to initialize the registers */
+	if (pRing->pProg == dmacHw_DESC_INIT) {
+		pRing->pProg = pRing->pHead;
+	}
+	pRing->pEnd = pRing->pHead;
+
+	/* Advance the descriptor */
+	dmacHw_NEXT_DESC(pRing, pHead);
+
+	/* Update Tail pointer if destination is a peripheral */
+	if (!dmacHw_DST_IS_MEMORY(pConfig->transferType)) {
+		pRing->pTail = pRing->pHead;
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Sets channel specific user data
+*
+*  This function associates user data to a specif DMA channel
+*
+*/
+/****************************************************************************/
+void dmacHw_setChannelUserData(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle */
+			       void *userData	/*  [ IN ] User data */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+	pCblk->userData = userData;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Gets channel specific user data
+*
+*  This function returns user data specific to a DMA channel
+*
+*  @return   user data
+*/
+/****************************************************************************/
+void *dmacHw_getChannelUserData(dmacHw_HANDLE_t handle	/*  [ IN ] DMA Channel handle */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+	return pCblk->userData;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Resets descriptor control information
+*
+*  @return  void
+*/
+/****************************************************************************/
+void dmacHw_resetDescriptorControl(void *pDescriptor	/*   [ IN ] Descriptor buffer  */
+    ) {
+	int i;
+	dmacHw_DESC_RING_t *pRing;
+	dmacHw_DESC_t *pDesc;
+
+	pRing = dmacHw_GET_DESC_RING(pDescriptor);
+	pDesc = pRing->pHead;
+
+	for (i = 0; i < pRing->num; i++) {
+		/* Mark descriptor is ready to use */
+		pDesc->ctl.hi = dmacHw_DESC_FREE;
+		/* Look into next link list item */
+		pDesc++;
+	}
+	pRing->pFree = pRing->pTail = pRing->pEnd = pRing->pHead;
+	pRing->pProg = dmacHw_DESC_INIT;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Displays channel specific registers and other control parameters
+*
+*  @return  void
+*
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+void dmacHw_printDebugInfo(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle */
+			   void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+			   int (*fpPrint) (const char *, ...)	/*  [ IN ] Print callback function */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+	DisplayRegisterContents(pCblk->module, pCblk->channel, fpPrint);
+	DisplayDescRing(pDescriptor, fpPrint);
+}
-- 
cgit v1.2.3


From 7ba09020287fa6c181707490ea7143abb3db55b1 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:09:49 +0100
Subject: ARM: 5660/1: bcmring: add csp timer block header and source files

add csp timer block header and source files

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/csp/tmr/Makefile             |   1 +
 arch/arm/mach-bcmring/csp/tmr/tmrHw.c              | 576 +++++++++++++++++++++
 arch/arm/mach-bcmring/include/csp/tmrHw.h          | 263 ++++++++++
 arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h |  82 +++
 4 files changed, 922 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/csp/tmr/Makefile
 create mode 100644 arch/arm/mach-bcmring/csp/tmr/tmrHw.c
 create mode 100644 arch/arm/mach-bcmring/include/csp/tmrHw.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h

(limited to 'arch/arm')

diff --git a/arch/arm/mach-bcmring/csp/tmr/Makefile b/arch/arm/mach-bcmring/csp/tmr/Makefile
new file mode 100644
index 00000000000..244a61ab769
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/tmr/Makefile
@@ -0,0 +1 @@
+obj-y += tmrHw.o
diff --git a/arch/arm/mach-bcmring/csp/tmr/tmrHw.c b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
new file mode 100644
index 00000000000..5c1c9a0e5ed
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
@@ -0,0 +1,576 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    tmrHw.c
+*
+*  @brief   Low level Timer driver routines
+*
+*  @note
+*
+*   These routines provide basic timer functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/errno.h>
+#include <csp/stdint.h>
+
+#include <csp/tmrHw.h>
+#include <mach/csp/tmrHw_reg.h>
+
+#define tmrHw_ASSERT(a)                     if (!(a)) *(char *)0 = 0
+#define tmrHw_MILLISEC_PER_SEC              (1000)
+
+#define tmrHw_LOW_1_RESOLUTION_COUNT        (tmrHw_LOW_RESOLUTION_CLOCK / tmrHw_MILLISEC_PER_SEC)
+#define tmrHw_LOW_1_MAX_MILLISEC            (0xFFFFFFFF / tmrHw_LOW_1_RESOLUTION_COUNT)
+#define tmrHw_LOW_16_RESOLUTION_COUNT       (tmrHw_LOW_1_RESOLUTION_COUNT / 16)
+#define tmrHw_LOW_16_MAX_MILLISEC           (0xFFFFFFFF / tmrHw_LOW_16_RESOLUTION_COUNT)
+#define tmrHw_LOW_256_RESOLUTION_COUNT      (tmrHw_LOW_1_RESOLUTION_COUNT / 256)
+#define tmrHw_LOW_256_MAX_MILLISEC          (0xFFFFFFFF / tmrHw_LOW_256_RESOLUTION_COUNT)
+
+#define tmrHw_HIGH_1_RESOLUTION_COUNT       (tmrHw_HIGH_RESOLUTION_CLOCK / tmrHw_MILLISEC_PER_SEC)
+#define tmrHw_HIGH_1_MAX_MILLISEC           (0xFFFFFFFF / tmrHw_HIGH_1_RESOLUTION_COUNT)
+#define tmrHw_HIGH_16_RESOLUTION_COUNT      (tmrHw_HIGH_1_RESOLUTION_COUNT / 16)
+#define tmrHw_HIGH_16_MAX_MILLISEC          (0xFFFFFFFF / tmrHw_HIGH_16_RESOLUTION_COUNT)
+#define tmrHw_HIGH_256_RESOLUTION_COUNT     (tmrHw_HIGH_1_RESOLUTION_COUNT / 256)
+#define tmrHw_HIGH_256_MAX_MILLISEC         (0xFFFFFFFF / tmrHw_HIGH_256_RESOLUTION_COUNT)
+
+static void ResetTimer(tmrHw_ID_t timerId)
+    __attribute__ ((section(".aramtext")));
+static int tmrHw_divide(int num, int denom)
+    __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Get timer capability
+*
+*  This function returns various capabilities/attributes of a timer
+*
+*  @return  Capability
+*
+*/
+/****************************************************************************/
+uint32_t tmrHw_getTimerCapability(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+				  tmrHw_CAPABILITY_e capability	/*  [ IN ] Timer capability */
+) {
+	switch (capability) {
+	case tmrHw_CAPABILITY_CLOCK:
+		return (timerId <=
+			1) ? tmrHw_LOW_RESOLUTION_CLOCK :
+		    tmrHw_HIGH_RESOLUTION_CLOCK;
+	case tmrHw_CAPABILITY_RESOLUTION:
+		return 32;
+	default:
+		return 0;
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Resets a timer
+*
+*  This function initializes  timer
+*
+*  @return  void
+*
+*/
+/****************************************************************************/
+static void ResetTimer(tmrHw_ID_t timerId	/*  [ IN ] Timer Id */
+) {
+	/* Reset timer */
+	pTmrHw[timerId].LoadValue = 0;
+	pTmrHw[timerId].CurrentValue = 0xFFFFFFFF;
+	pTmrHw[timerId].Control = 0;
+	pTmrHw[timerId].BackgroundLoad = 0;
+	/* Always configure as a 32 bit timer */
+	pTmrHw[timerId].Control |= tmrHw_CONTROL_32BIT;
+	/* Clear interrupt only if raw status interrupt is set */
+	if (pTmrHw[timerId].RawInterruptStatus) {
+		pTmrHw[timerId].InterruptClear = 0xFFFFFFFF;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Sets counter value for an interval in ms
+*
+*  @return   On success: Effective counter value set
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+static tmrHw_INTERVAL_t SetTimerPeriod(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+				       tmrHw_INTERVAL_t msec	/*  [ IN ] Interval in milli-second */
+) {
+	uint32_t scale = 0;
+	uint32_t count = 0;
+
+	if (timerId == 0 || timerId == 1) {
+		if (msec <= tmrHw_LOW_1_MAX_MILLISEC) {
+			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
+			scale = tmrHw_LOW_1_RESOLUTION_COUNT;
+		} else if (msec <= tmrHw_LOW_16_MAX_MILLISEC) {
+			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16;
+			scale = tmrHw_LOW_16_RESOLUTION_COUNT;
+		} else if (msec <= tmrHw_LOW_256_MAX_MILLISEC) {
+			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256;
+			scale = tmrHw_LOW_256_RESOLUTION_COUNT;
+		} else {
+			return 0;
+		}
+
+		count = msec * scale;
+		/* Set counter value */
+		pTmrHw[timerId].LoadValue = count;
+		pTmrHw[timerId].BackgroundLoad = count;
+
+	} else if (timerId == 2 || timerId == 3) {
+		if (msec <= tmrHw_HIGH_1_MAX_MILLISEC) {
+			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
+			scale = tmrHw_HIGH_1_RESOLUTION_COUNT;
+		} else if (msec <= tmrHw_HIGH_16_MAX_MILLISEC) {
+			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16;
+			scale = tmrHw_HIGH_16_RESOLUTION_COUNT;
+		} else if (msec <= tmrHw_HIGH_256_MAX_MILLISEC) {
+			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256;
+			scale = tmrHw_HIGH_256_RESOLUTION_COUNT;
+		} else {
+			return 0;
+		}
+
+		count = msec * scale;
+		/* Set counter value */
+		pTmrHw[timerId].LoadValue = count;
+		pTmrHw[timerId].BackgroundLoad = count;
+	}
+	return count / scale;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Configures a periodic timer in terms of timer interrupt rate
+*
+*  This function initializes a periodic timer to generate specific number of
+*  timer interrupt per second
+*
+*  @return   On success: Effective timer frequency
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_setPeriodicTimerRate(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+					tmrHw_RATE_t rate	/*  [ IN ] Number of timer interrupt per second */
+) {
+	uint32_t resolution = 0;
+	uint32_t count = 0;
+	ResetTimer(timerId);
+
+	/* Set timer mode periodic */
+	pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC;
+	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT;
+	/* Set timer in highest resolution */
+	pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
+
+	if (rate && (timerId == 0 || timerId == 1)) {
+		if (rate > tmrHw_LOW_RESOLUTION_CLOCK) {
+			return 0;
+		}
+		resolution = tmrHw_LOW_RESOLUTION_CLOCK;
+	} else if (rate && (timerId == 2 || timerId == 3)) {
+		if (rate > tmrHw_HIGH_RESOLUTION_CLOCK) {
+			return 0;
+		} else {
+			resolution = tmrHw_HIGH_RESOLUTION_CLOCK;
+		}
+	} else {
+		return 0;
+	}
+	/* Find the counter value */
+	count = resolution / rate;
+	/* Set counter value */
+	pTmrHw[timerId].LoadValue = count;
+	pTmrHw[timerId].BackgroundLoad = count;
+
+	return resolution / count;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Configures a periodic timer to generate timer interrupt after
+*           certain time interval
+*
+*  This function initializes a periodic timer to generate timer interrupt
+*  after every time interval in millisecond
+*
+*  @return   On success: Effective interval set in milli-second
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_INTERVAL_t tmrHw_setPeriodicTimerInterval(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+						tmrHw_INTERVAL_t msec	/*  [ IN ] Interval in milli-second */
+) {
+	ResetTimer(timerId);
+
+	/* Set timer mode periodic */
+	pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC;
+	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT;
+
+	return SetTimerPeriod(timerId, msec);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Configures a periodic timer to generate timer interrupt just once
+*           after certain time interval
+*
+*  This function initializes a periodic timer to generate a single ticks after
+*  certain time interval in millisecond
+*
+*  @return   On success: Effective interval set in milli-second
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_INTERVAL_t tmrHw_setOneshotTimerInterval(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+					       tmrHw_INTERVAL_t msec	/*  [ IN ] Interval in milli-second */
+) {
+	ResetTimer(timerId);
+
+	/* Set timer mode oneshot */
+	pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC;
+	pTmrHw[timerId].Control |= tmrHw_CONTROL_ONESHOT;
+
+	return SetTimerPeriod(timerId, msec);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Configures a timer to run as a free running timer
+*
+*  This function initializes a timer to run as a free running timer
+*
+*  @return   Timer resolution (count / sec)
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_setFreeRunningTimer(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+				       uint32_t divider	/*  [ IN ] Dividing the clock frequency */
+) {
+	uint32_t scale = 0;
+
+	ResetTimer(timerId);
+	/* Set timer as free running mode */
+	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_PERIODIC;
+	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT;
+
+	if (divider >= 64) {
+		pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256;
+		scale = 256;
+	} else if (divider >= 8) {
+		pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16;
+		scale = 16;
+	} else {
+		pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
+		scale = 1;
+	}
+
+	if (timerId == 0 || timerId == 1) {
+		return tmrHw_divide(tmrHw_LOW_RESOLUTION_CLOCK, scale);
+	} else if (timerId == 2 || timerId == 3) {
+		return tmrHw_divide(tmrHw_HIGH_RESOLUTION_CLOCK, scale);
+	}
+
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Starts a timer
+*
+*  This function starts a preconfigured timer
+*
+*  @return  -1     - On Failure
+*            0     - On Success
+*
+*/
+/****************************************************************************/
+int tmrHw_startTimer(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) {
+	pTmrHw[timerId].Control |= tmrHw_CONTROL_TIMER_ENABLE;
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Stops a timer
+*
+*  This function stops a running timer
+*
+*  @return  -1     - On Failure
+*            0     - On Success
+*
+*/
+/****************************************************************************/
+int tmrHw_stopTimer(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) {
+	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_TIMER_ENABLE;
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Gets current timer count
+*
+*  This function returns the current timer value
+*
+*  @return  Current downcounting timer value
+*
+*/
+/****************************************************************************/
+uint32_t tmrHw_GetCurrentCount(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) {
+	/* return 32 bit timer value */
+	switch (pTmrHw[timerId].Control & tmrHw_CONTROL_MODE_MASK) {
+	case tmrHw_CONTROL_FREE_RUNNING:
+		if (pTmrHw[timerId].CurrentValue) {
+			return tmrHw_MAX_COUNT - pTmrHw[timerId].CurrentValue;
+		}
+		break;
+	case tmrHw_CONTROL_PERIODIC:
+	case tmrHw_CONTROL_ONESHOT:
+		return pTmrHw[timerId].BackgroundLoad -
+		    pTmrHw[timerId].CurrentValue;
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Gets timer count rate
+*
+*  This function returns the number of counts per second
+*
+*  @return  Count rate
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_getCountRate(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) {
+	uint32_t divider = 0;
+
+	switch (pTmrHw[timerId].Control & tmrHw_CONTROL_PRESCALE_MASK) {
+	case tmrHw_CONTROL_PRESCALE_1:
+		divider = 1;
+		break;
+	case tmrHw_CONTROL_PRESCALE_16:
+		divider = 16;
+		break;
+	case tmrHw_CONTROL_PRESCALE_256:
+		divider = 256;
+		break;
+	default:
+		tmrHw_ASSERT(0);
+	}
+
+	if (timerId == 0 || timerId == 1) {
+		return tmrHw_divide(tmrHw_LOW_RESOLUTION_CLOCK, divider);
+	} else {
+		return tmrHw_divide(tmrHw_HIGH_RESOLUTION_CLOCK, divider);
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enables timer interrupt
+*
+*  This function enables the timer interrupt
+*
+*  @return   N/A
+*
+*/
+/****************************************************************************/
+void tmrHw_enableInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) {
+	pTmrHw[timerId].Control |= tmrHw_CONTROL_INTERRUPT_ENABLE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disables timer interrupt
+*
+*  This function disable the timer interrupt
+*
+*  @return   N/A
+*
+*/
+/****************************************************************************/
+void tmrHw_disableInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) {
+	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_INTERRUPT_ENABLE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Clears the interrupt
+*
+*  This function clears the timer interrupt
+*
+*  @return   N/A
+*
+*  @note
+*     Must be called under the context of ISR
+*/
+/****************************************************************************/
+void tmrHw_clearInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) {
+	pTmrHw[timerId].InterruptClear = 0x1;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Gets the interrupt status
+*
+*  This function returns timer interrupt status
+*
+*  @return   Interrupt status
+*/
+/****************************************************************************/
+tmrHw_INTERRUPT_STATUS_e tmrHw_getInterruptStatus(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) {
+	if (pTmrHw[timerId].InterruptStatus) {
+		return tmrHw_INTERRUPT_STATUS_SET;
+	} else {
+		return tmrHw_INTERRUPT_STATUS_UNSET;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Indentifies a timer causing interrupt
+*
+*  This functions returns a timer causing interrupt
+*
+*  @return  0xFFFFFFFF   : No timer causing an interrupt
+*           ! 0xFFFFFFFF : timer causing an interrupt
+*  @note
+*     tmrHw_clearIntrrupt() must be called with a valid timer id after calling this function
+*/
+/****************************************************************************/
+tmrHw_ID_t tmrHw_getInterruptSource(void	/*  void */
+) {
+	int i;
+
+	for (i = 0; i < tmrHw_TIMER_NUM_COUNT; i++) {
+		if (pTmrHw[i].InterruptStatus) {
+			return i;
+		}
+	}
+
+	return 0xFFFFFFFF;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Displays specific timer registers
+*
+*
+*  @return  void
+*
+*/
+/****************************************************************************/
+void tmrHw_printDebugInfo(tmrHw_ID_t timerId,	/*  [ IN ] Timer id */
+			  int (*fpPrint) (const char *, ...)	/*  [ IN ] Print callback function */
+) {
+	(*fpPrint) ("Displaying register contents \n\n");
+	(*fpPrint) ("Timer %d: Load value              0x%X\n", timerId,
+		    pTmrHw[timerId].LoadValue);
+	(*fpPrint) ("Timer %d: Background load value   0x%X\n", timerId,
+		    pTmrHw[timerId].BackgroundLoad);
+	(*fpPrint) ("Timer %d: Control                 0x%X\n", timerId,
+		    pTmrHw[timerId].Control);
+	(*fpPrint) ("Timer %d: Interrupt clear         0x%X\n", timerId,
+		    pTmrHw[timerId].InterruptClear);
+	(*fpPrint) ("Timer %d: Interrupt raw interrupt 0x%X\n", timerId,
+		    pTmrHw[timerId].RawInterruptStatus);
+	(*fpPrint) ("Timer %d: Interrupt status        0x%X\n", timerId,
+		    pTmrHw[timerId].InterruptStatus);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Use a timer to perform a busy wait delay for a number of usecs.
+*
+*  @return   N/A
+*/
+/****************************************************************************/
+void tmrHw_udelay(tmrHw_ID_t timerId,	/*  [ IN ] Timer id */
+		  unsigned long usecs /*  [ IN ] usec to delay */
+) {
+	tmrHw_RATE_t usec_tick_rate;
+	tmrHw_COUNT_t start_time;
+	tmrHw_COUNT_t delta_time;
+
+	start_time = tmrHw_GetCurrentCount(timerId);
+	usec_tick_rate = tmrHw_divide(tmrHw_getCountRate(timerId), 1000000);
+	delta_time = usecs * usec_tick_rate;
+
+	/* Busy wait */
+	while (delta_time > (tmrHw_GetCurrentCount(timerId) - start_time))
+		;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Local Divide function
+*
+*  This function does the divide
+*
+*  @return divide value
+*
+*/
+/****************************************************************************/
+static int tmrHw_divide(int num, int denom)
+{
+	int r;
+	int t = 1;
+
+	/* Shift denom and t up to the largest value to optimize algorithm */
+	/* t contains the units of each divide */
+	while ((denom & 0x40000000) == 0) {	/* fails if denom=0 */
+		denom = denom << 1;
+		t = t << 1;
+	}
+
+	/* Intialize the result */
+	r = 0;
+
+	do {
+		/* Determine if there exists a positive remainder */
+		if ((num - denom) >= 0) {
+			/* Accumlate t to the result and calculate a new remainder */
+			num = num - denom;
+			r = r + t;
+		}
+		/* Continue to shift denom and shift t down to 0 */
+		denom = denom >> 1;
+		t = t >> 1;
+	} while (t != 0);
+	return r;
+}
diff --git a/arch/arm/mach-bcmring/include/csp/tmrHw.h b/arch/arm/mach-bcmring/include/csp/tmrHw.h
new file mode 100644
index 00000000000..f1236d00cb9
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/tmrHw.h
@@ -0,0 +1,263 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    tmrHw.h
+*
+*  @brief   API definitions for low level Timer driver
+*
+*/
+/****************************************************************************/
+#ifndef _TMRHW_H
+#define _TMRHW_H
+
+#include <csp/stdint.h>
+
+typedef uint32_t tmrHw_ID_t;	/* Timer ID */
+typedef uint32_t tmrHw_COUNT_t;	/* Timer count */
+typedef uint32_t tmrHw_INTERVAL_t;	/* Timer interval */
+typedef uint32_t tmrHw_RATE_t;	/* Timer event (count/interrupt) rate */
+
+typedef enum {
+	tmrHw_INTERRUPT_STATUS_SET,	/* Interrupted  */
+	tmrHw_INTERRUPT_STATUS_UNSET	/* No Interrupt */
+} tmrHw_INTERRUPT_STATUS_e;
+
+typedef enum {
+	tmrHw_CAPABILITY_CLOCK,	/* Clock speed in HHz */
+	tmrHw_CAPABILITY_RESOLUTION	/* Timer resolution in bits */
+} tmrHw_CAPABILITY_e;
+
+/****************************************************************************/
+/**
+*  @brief   Get timer capability
+*
+*  This function returns various capabilities/attributes of a timer
+*
+*  @return  Numeric capability
+*
+*/
+/****************************************************************************/
+uint32_t tmrHw_getTimerCapability(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+				  tmrHw_CAPABILITY_e capability	/*  [ IN ] Timer capability */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Configures a periodic timer in terms of timer interrupt rate
+*
+*  This function initializes a periodic timer to generate specific number of
+*  timer interrupt per second
+*
+*  @return   On success: Effective timer frequency
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_setPeriodicTimerRate(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+					tmrHw_RATE_t rate	/*  [ IN ] Number of timer interrupt per second */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Configures a periodic timer to generate timer interrupt after
+*           certain time interval
+*
+*  This function initializes a periodic timer to generate timer interrupt
+*  after every time interval in milisecond
+*
+*  @return   On success: Effective interval set in mili-second
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_INTERVAL_t tmrHw_setPeriodicTimerInterval(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+						tmrHw_INTERVAL_t msec	/*  [ IN ] Interval in mili-second */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Configures a periodic timer to generate timer interrupt just once
+*           after certain time interval
+*
+*  This function initializes a periodic timer to generate a single ticks after
+*  certain time interval in milisecond
+*
+*  @return   On success: Effective interval set in mili-second
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_INTERVAL_t tmrHw_setOneshotTimerInterval(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+					       tmrHw_INTERVAL_t msec	/*  [ IN ] Interval in mili-second */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Configures a timer to run as a free running timer
+*
+*  This function initializes a timer to run as a free running timer
+*
+*  @return   Timer resolution (count / sec)
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_setFreeRunningTimer(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+				       uint32_t divider	/*  [ IN ] Dividing the clock frequency */
+) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Starts a timer
+*
+*  This function starts a preconfigured timer
+*
+*  @return  -1     - On Failure
+*            0     - On Success
+*/
+/****************************************************************************/
+int tmrHw_startTimer(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Stops a timer
+*
+*  This function stops a running timer
+*
+*  @return  -1     - On Failure
+*            0     - On Success
+*/
+/****************************************************************************/
+int tmrHw_stopTimer(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Gets current timer count
+*
+*  This function returns the current timer value
+*
+*  @return  Current downcounting timer value
+*
+*/
+/****************************************************************************/
+tmrHw_COUNT_t tmrHw_GetCurrentCount(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Gets timer count rate
+*
+*  This function returns the number of counts per second
+*
+*  @return  Count rate
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_getCountRate(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Enables timer interrupt
+*
+*  This function enables the timer interrupt
+*
+*  @return   N/A
+*
+*/
+/****************************************************************************/
+void tmrHw_enableInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Disables timer interrupt
+*
+*  This function disable the timer interrupt
+*
+*  @return   N/A
+*/
+/****************************************************************************/
+void tmrHw_disableInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Clears the interrupt
+*
+*  This function clears the timer interrupt
+*
+*  @return   N/A
+*
+*  @note
+*     Must be called under the context of ISR
+*/
+/****************************************************************************/
+void tmrHw_clearInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Gets the interrupt status
+*
+*  This function returns timer interrupt status
+*
+*  @return   Interrupt status
+*/
+/****************************************************************************/
+tmrHw_INTERRUPT_STATUS_e tmrHw_getInterruptStatus(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Indentifies a timer causing interrupt
+*
+*  This functions returns a timer causing interrupt
+*
+*  @return  0xFFFFFFFF   : No timer causing an interrupt
+*           ! 0xFFFFFFFF : timer causing an interrupt
+*  @note
+*     tmrHw_clearIntrrupt() must be called with a valid timer id after calling this function
+*/
+/****************************************************************************/
+tmrHw_ID_t tmrHw_getInterruptSource(void);
+
+/****************************************************************************/
+/**
+*  @brief   Displays specific timer registers
+*
+*
+*  @return  void
+*
+*/
+/****************************************************************************/
+void tmrHw_printDebugInfo(tmrHw_ID_t timerId,	/*  [ IN ] Timer id */
+			  int (*fpPrint) (const char *, ...)	/*  [ IN ] Print callback function */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Use a timer to perform a busy wait delay for a number of usecs.
+*
+*  @return   N/A
+*/
+/****************************************************************************/
+void tmrHw_udelay(tmrHw_ID_t timerId,	/*  [ IN ] Timer id */
+		  unsigned long usecs	/*  [ IN ] usec to delay */
+) __attribute__ ((section(".aramtext")));
+
+#endif /* _TMRHW_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h
new file mode 100644
index 00000000000..3080ac7239a
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h
@@ -0,0 +1,82 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    tmrHw_reg.h
+*
+*  @brief   Definitions for low level Timer registers
+*
+*/
+/****************************************************************************/
+#ifndef _TMRHW_REG_H
+#define _TMRHW_REG_H
+
+#include <mach/csp/mm_io.h>
+#include <mach/csp/hw_cfg.h>
+/* Base address */
+#define tmrHw_MODULE_BASE_ADDR          MM_IO_BASE_TMR
+
+/*
+This platform has four different timers running at different clock speed
+
+Timer one   (Timer ID 0) runs at  25 MHz
+Timer two   (Timer ID 1) runs at  25 MHz
+Timer three (Timer ID 2) runs at 150 MHz
+Timer four  (Timer ID 3) runs at 150 MHz
+*/
+#define tmrHw_LOW_FREQUENCY_MHZ         25	/* Always 25MHz from XTAL */
+#define tmrHw_LOW_FREQUENCY_HZ          25000000
+
+#if defined(CFG_GLOBAL_CHIP) && (CFG_GLOBAL_CHIP == FPGA11107)
+#define tmrHw_HIGH_FREQUENCY_MHZ        150	/* Always 150MHz for FPGA */
+#define tmrHw_HIGH_FREQUENCY_HZ         150000000
+#else
+#define tmrHw_HIGH_FREQUENCY_HZ         HW_CFG_BUS_CLK_HZ
+#define tmrHw_HIGH_FREQUENCY_MHZ        (HW_CFG_BUS_CLK_HZ / 1000000)
+#endif
+
+#define tmrHw_LOW_RESOLUTION_CLOCK      tmrHw_LOW_FREQUENCY_HZ
+#define tmrHw_HIGH_RESOLUTION_CLOCK     tmrHw_HIGH_FREQUENCY_HZ
+#define tmrHw_MAX_COUNT                 (0xFFFFFFFF)	/* maximum number of count a timer can count */
+#define tmrHw_TIMER_NUM_COUNT           (4)	/* Number of timer module supported */
+
+typedef struct {
+	uint32_t LoadValue;	/* Load value for timer */
+	uint32_t CurrentValue;	/* Current value for timer */
+	uint32_t Control;	/* Control register */
+	uint32_t InterruptClear;	/* Interrupt clear register */
+	uint32_t RawInterruptStatus;	/* Raw interrupt status */
+	uint32_t InterruptStatus;	/* Masked interrupt status */
+	uint32_t BackgroundLoad;	/* Background load value */
+	uint32_t padding;	/* Padding register */
+} tmrHw_REG_t;
+
+/* Control bot masks */
+#define tmrHw_CONTROL_TIMER_ENABLE            0x00000080
+#define tmrHw_CONTROL_PERIODIC                0x00000040
+#define tmrHw_CONTROL_INTERRUPT_ENABLE        0x00000020
+#define tmrHw_CONTROL_PRESCALE_MASK           0x0000000C
+#define tmrHw_CONTROL_PRESCALE_1              0x00000000
+#define tmrHw_CONTROL_PRESCALE_16             0x00000004
+#define tmrHw_CONTROL_PRESCALE_256            0x00000008
+#define tmrHw_CONTROL_32BIT                   0x00000002
+#define tmrHw_CONTROL_ONESHOT                 0x00000001
+#define tmrHw_CONTROL_FREE_RUNNING            0x00000000
+
+#define tmrHw_CONTROL_MODE_MASK               (tmrHw_CONTROL_PERIODIC | tmrHw_CONTROL_ONESHOT)
+
+#define pTmrHw ((volatile tmrHw_REG_t *)tmrHw_MODULE_BASE_ADDR)
+
+#endif /* _TMRHW_REG_H */
-- 
cgit v1.2.3


From a364143127a3155153f3e93d47cfc0f99a6f1858 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:10:24 +0100
Subject: ARM: 5661/1: bcmring: add csp security hardware headers

add csp security hardware headers

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/include/csp/secHw.h          |  65 ++++++++++++++
 arch/arm/mach-bcmring/include/mach/csp/secHw_def.h | 100 +++++++++++++++++++++
 .../mach-bcmring/include/mach/csp/secHw_inline.h   |  79 ++++++++++++++++
 3 files changed, 244 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/csp/secHw.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/secHw_def.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h

(limited to 'arch/arm')

diff --git a/arch/arm/mach-bcmring/include/csp/secHw.h b/arch/arm/mach-bcmring/include/csp/secHw.h
new file mode 100644
index 00000000000..b9d7e0732df
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/secHw.h
@@ -0,0 +1,65 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    secHw.h
+*
+*  @brief   Definitions for accessing low level security features
+*
+*/
+/****************************************************************************/
+#ifndef SECHW_H
+#define SECHW_H
+
+typedef void (*secHw_FUNC_t) (void);
+
+typedef enum {
+	secHw_MODE_SECURE = 0x0,	/* Switches processor into secure mode */
+	secHw_MODE_NONSECURE = 0x1	/* Switches processor into non-secure mode */
+} secHw_MODE;
+
+/****************************************************************************/
+/**
+*  @brief   Requesting to execute the function in secure mode
+*
+*  This function requests the given function to run in secure mode
+*
+*/
+/****************************************************************************/
+void secHw_RunSecure(secHw_FUNC_t	/* Function to run in secure mode */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Sets the  mode
+*
+*  his function sets the processor mode (secure/non-secure)
+*
+*/
+/****************************************************************************/
+void secHw_SetMode(secHw_MODE	/* Processor mode */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Get the current mode
+*
+*  This function retieves the processor mode (secure/non-secure)
+*
+*/
+/****************************************************************************/
+void secHw_GetMode(secHw_MODE *);
+
+#endif /* SECHW_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h b/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h
new file mode 100644
index 00000000000..d15f5f3ec2d
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h
@@ -0,0 +1,100 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    secHw_def.h
+*
+*  @brief   Definitions for configuring/testing secure blocks
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+
+#ifndef SECHW_DEF_H
+#define SECHW_DEF_H
+
+#include <mach/csp/mm_io.h>
+
+/* Bit mask for various secure device */
+#define secHw_BLK_MASK_CHIP_CONTROL     0x00000001
+#define secHw_BLK_MASK_KEY_SCAN         0x00000002
+#define secHw_BLK_MASK_TOUCH_SCREEN     0x00000004
+#define secHw_BLK_MASK_UART0            0x00000008
+#define secHw_BLK_MASK_UART1            0x00000010
+#define secHw_BLK_MASK_WATCHDOG         0x00000020
+#define secHw_BLK_MASK_SPUM             0x00000040
+#define secHw_BLK_MASK_DDR2             0x00000080
+#define secHw_BLK_MASK_EXT_MEM          0x00000100
+#define secHw_BLK_MASK_ESW              0x00000200
+#define secHw_BLK_MASK_SPU              0x00010000
+#define secHw_BLK_MASK_PKA              0x00020000
+#define secHw_BLK_MASK_RNG              0x00040000
+#define secHw_BLK_MASK_RTC              0x00080000
+#define secHw_BLK_MASK_OTP              0x00100000
+#define secHw_BLK_MASK_BOOT             0x00200000
+#define secHw_BLK_MASK_MPU              0x00400000
+#define secHw_BLK_MASK_TZCTRL           0x00800000
+#define secHw_BLK_MASK_INTR             0x01000000
+
+/* Trustzone register set */
+typedef struct {
+	volatile uint32_t status;	/* read only - reflects status of writes of 2 write registers */
+	volatile uint32_t setUnsecure;	/* write only. reads back as 0 */
+	volatile uint32_t setSecure;	/* write only. reads back as 0 */
+} secHw_TZREG_t;
+
+/* There are 2 register sets. The first is for the lower 16 bits, the 2nd */
+/* is for the higher 16 bits. */
+
+typedef enum {
+	secHw_IDX_LS = 0,
+	secHw_IDX_MS = 1,
+	secHw_IDX_NUM
+} secHw_IDX_e;
+
+typedef struct {
+	volatile secHw_TZREG_t reg[secHw_IDX_NUM];
+} secHw_REGS_t;
+
+/****************************************************************************/
+/**
+*  @brief  Configures a device as a secure device
+*
+*/
+/****************************************************************************/
+static inline void secHw_setSecure(uint32_t mask	/*  mask of type secHw_BLK_MASK_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief  Configures a device as a non-secure device
+*
+*/
+/****************************************************************************/
+static inline void secHw_setUnsecure(uint32_t mask	/*  mask of type secHw_BLK_MASK_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief  Get the trustzone status for all components. 1 = non-secure, 0 = secure
+*
+*/
+/****************************************************************************/
+static inline uint32_t secHw_getStatus(void);
+
+#include <mach/csp/secHw_inline.h>
+
+#endif /* SECHW_DEF_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h
new file mode 100644
index 00000000000..9cd6a032ab7
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h
@@ -0,0 +1,79 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    secHw_inline.h
+*
+*  @brief   Definitions for configuring/testing secure blocks
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+
+#ifndef SECHW_INLINE_H
+#define SECHW_INLINE_H
+
+/****************************************************************************/
+/**
+*  @brief  Configures a device as a secure device
+*
+*/
+/****************************************************************************/
+static inline void secHw_setSecure(uint32_t mask	/*  mask of type secHw_BLK_MASK_XXXXXX */
+    ) {
+	secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
+
+	if (mask & 0x0000FFFF) {
+		regp->reg[secHw_IDX_LS].setSecure = mask & 0x0000FFFF;
+	}
+
+	if (mask & 0xFFFF0000) {
+		regp->reg[secHw_IDX_MS].setSecure = mask >> 16;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief  Configures a device as a non-secure device
+*
+*/
+/****************************************************************************/
+static inline void secHw_setUnsecure(uint32_t mask	/*  mask of type secHw_BLK_MASK_XXXXXX */
+    ) {
+	secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
+
+	if (mask & 0x0000FFFF) {
+		regp->reg[secHw_IDX_LS].setUnsecure = mask & 0x0000FFFF;
+	}
+	if (mask & 0xFFFF0000) {
+		regp->reg[secHw_IDX_MS].setUnsecure = mask >> 16;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief  Get the trustzone status for all components. 1 = non-secure, 0 = secure
+*
+*/
+/****************************************************************************/
+static inline uint32_t secHw_getStatus(void)
+{
+	secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
+
+	return (regp->reg[1].status << 16) + regp->reg[0].status;
+}
+
+#endif /* SECHW_INLINE_H */
-- 
cgit v1.2.3


From bc5739005f9c0585d21c78f61e9d7965f97b2109 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:04:17 +0100
Subject: ARM: 5653/1: bcmring: add Makefile of csp code

add Makefile of csp code

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/csp/Makefile | 3 +++
 1 file changed, 3 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/csp/Makefile

(limited to 'arch/arm')

diff --git a/arch/arm/mach-bcmring/csp/Makefile b/arch/arm/mach-bcmring/csp/Makefile
new file mode 100644
index 00000000000..648c0377530
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/Makefile
@@ -0,0 +1,3 @@
+obj-y += dmac/
+obj-y += tmr/
+obj-y += chipc/
-- 
cgit v1.2.3


From 831f1f73a6e1a0a02a5eaa2da5f49cf09c7bb1af Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 19:46:49 +0100
Subject: ARM: 5642/1: bcmring: add Makefile/Kconfig/Makefile.boot in
 mach-bcmring

add arch/arm/mach-bcmring directory

add Kconfig, Makefile, and Makefile.boot in mach-bcmring

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/Kconfig       | 21 +++++++++++++++++++++
 arch/arm/mach-bcmring/Makefile      |  8 ++++++++
 arch/arm/mach-bcmring/Makefile.boot |  6 ++++++
 3 files changed, 35 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/Kconfig
 create mode 100644 arch/arm/mach-bcmring/Makefile
 create mode 100644 arch/arm/mach-bcmring/Makefile.boot

(limited to 'arch/arm')

diff --git a/arch/arm/mach-bcmring/Kconfig b/arch/arm/mach-bcmring/Kconfig
new file mode 100644
index 00000000000..457b4384913
--- /dev/null
+++ b/arch/arm/mach-bcmring/Kconfig
@@ -0,0 +1,21 @@
+choice
+	prompt "Processor selection in BCMRING family of devices"
+	depends on ARCH_BCMRING
+	default ARCH_BCM11107
+
+config ARCH_FPGA11107
+	bool "FPGA11107"
+
+config ARCH_BCM11107
+	bool "BCM11107"
+endchoice
+
+menu "BCMRING Options"
+	depends on ARCH_BCMRING
+
+config BCM_ZRELADDR
+	hex "Compressed ZREL ADDR"
+
+endmenu
+
+# source "drivers/char/bcmring/Kconfig"
diff --git a/arch/arm/mach-bcmring/Makefile b/arch/arm/mach-bcmring/Makefile
new file mode 100644
index 00000000000..f8d9fcedf91
--- /dev/null
+++ b/arch/arm/mach-bcmring/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+
+obj-y := arch.o mm.o irq.o clock.o core.o timer.o dma.o
+obj-y += csp/
diff --git a/arch/arm/mach-bcmring/Makefile.boot b/arch/arm/mach-bcmring/Makefile.boot
new file mode 100644
index 00000000000..fb53b283beb
--- /dev/null
+++ b/arch/arm/mach-bcmring/Makefile.boot
@@ -0,0 +1,6 @@
+# Address where decompressor will be written and eventually executed.
+#
+# default to SDRAM
+zreladdr-y      := $(CONFIG_BCM_ZRELADDR)
+params_phys-y   := 0x00000800
+
-- 
cgit v1.2.3


From 6288e28dce9bae24068b7341ebd72a7d176a3539 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 19:46:15 +0100
Subject: ARM: 5641/1: bcmring: add Kconfig and Makefile entries in arch/arm

add bcmring option in Kconfig and add entry in Makefile
in arch/arm directory

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig  | 14 ++++++++++++++
 arch/arm/Makefile |  1 +
 2 files changed, 15 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aef63c8e3d2..c6d2b198875 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -637,6 +637,18 @@ config ARCH_OMAP
 	help
 	  Support for TI's OMAP platform (OMAP1 and OMAP2).
 
+config ARCH_BCMRING
+	bool "Broadcom BCMRING"
+	depends on MMU
+	select CPU_V6
+	select ARM_AMBA
+	select COMMON_CLKDEV
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	help
+	  Support for Broadcom's BCMRing platform.
+
 endchoice
 
 source "arch/arm/mach-clps711x/Kconfig"
@@ -730,6 +742,8 @@ source "arch/arm/mach-u300/Kconfig"
 
 source "arch/arm/mach-w90x900/Kconfig"
 
+source "arch/arm/mach-bcmring/Kconfig"
+
 # Definitions to make life easier
 config ARCH_ACORN
 	bool
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c877d6df23d..b9ae98b88a7 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -112,6 +112,7 @@ endif
 # by CONFIG_* macro name.
 machine-$(CONFIG_ARCH_AAEC2000)		:= aaec2000
 machine-$(CONFIG_ARCH_AT91)		:= at91
+machine-$(CONFIG_ARCH_BCMRING)		:= bcmring
 machine-$(CONFIG_ARCH_CLPS711X)		:= clps711x
 machine-$(CONFIG_ARCH_DAVINCI)		:= davinci
 machine-$(CONFIG_ARCH_EBSA110)		:= ebsa110
-- 
cgit v1.2.3


From 7f33527f547161f5ddc05c252c81617b8de93f21 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Wed, 12 Aug 2009 22:07:26 +0100
Subject: ARM: 5670/1: bcmring: add default configuration for bcmring arch

add default configuration for bcmring arch

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/configs/bcmring_defconfig | 725 +++++++++++++++++++++++++++++++++++++
 1 file changed, 725 insertions(+)
 create mode 100644 arch/arm/configs/bcmring_defconfig

(limited to 'arch/arm')

diff --git a/arch/arm/configs/bcmring_defconfig b/arch/arm/configs/bcmring_defconfig
new file mode 100644
index 00000000000..bcc0bac551a
--- /dev/null
+++ b/arch/arm/configs/bcmring_defconfig
@@ -0,0 +1,725 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc3
+# Fri Jul 17 12:07:28 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+CONFIG_SHMEM=y
+# CONFIG_AIO is not set
+
+#
+# Performance Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+CONFIG_ARCH_BCMRING=y
+# CONFIG_ARCH_FPGA11107 is not set
+CONFIG_ARCH_BCM11107=y
+
+#
+# BCMRING Options
+#
+CONFIG_BCM_ZRELADDR=0x8000
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_ARM_ERRATA_411920 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0e000000
+CONFIG_ZBOOT_ROM_BSS=0x0ea00000
+CONFIG_ZBOOT_ROM=y
+CONFIG_CMDLINE=""
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+# CONFIG_UNIX is not set
+# CONFIG_NET_KEY is not set
+# CONFIG_INET is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_BCM_UMI=y
+CONFIG_MTD_NAND_BCM_UMI_HWCS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+# CONFIG_CONSOLE_TRANSLATIONS is not set
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=64
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_FSNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+# CONFIG_JFFS2_FS_SECURITY is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_HEADERS_CHECK=y
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_BUILD_DOCSRC is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
-- 
cgit v1.2.3


From ff54b4578448d616eb177e216acd599ecf5ee5b1 Mon Sep 17 00:00:00 2001
From: Byungho Min <bhminjames@gmail.com>
Date: Tue, 23 Jun 2009 21:39:49 +0900
Subject: ARM: S5PC100: Memory map

S5PC100's the physical IO space starts at 0xe000"0000. To maximize space for
vmalloc, the virtual IO space starts at 0xf400"0000 as same as other samsung
CPUs(s3c24xx and s3c64xx) do.

Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: subject and description fixup]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s5pc100/include/mach/map.h    | 75 +++++++++++++++++++++++++++++
 arch/arm/mach-s5pc100/include/mach/memory.h | 18 +++++++
 2 files changed, 93 insertions(+)
 create mode 100644 arch/arm/mach-s5pc100/include/mach/map.h
 create mode 100644 arch/arm/mach-s5pc100/include/mach/memory.h

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h
new file mode 100644
index 00000000000..9e9f39130b2
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/map.h
@@ -0,0 +1,75 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/map.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6400/include/mach/map.h
+ *
+ * S5PC1XX - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+
+
+/* Chip ID */
+#define S5PC100_PA_CHIPID	(0xE0000000)
+#define S5PC1XX_PA_CHIPID	S5PC100_PA_CHIPID
+#define S5PC1XX_VA_CHIPID	S3C_VA_SYS
+
+/* System */
+#define S5PC100_PA_SYS		(0xE0100000)
+#define S5PC100_PA_CLK		(S5PC100_PA_SYS + 0x0)
+#define S5PC100_PA_PWR		(S5PC100_PA_SYS + 0x8000)
+#define S5PC1XX_PA_CLK		S5PC100_PA_CLK
+#define S5PC1XX_PA_PWR		S5PC100_PA_PWR
+#define S5PC1XX_VA_CLK		(S3C_VA_SYS + 0x10000)
+#define S5PC1XX_VA_PWR		(S3C_VA_SYS + 0x20000)
+
+/* Interrupt */
+#define S5PC100_PA_VIC		(0xE4000000)
+#define S5PC100_VA_VIC		S3C_VA_IRQ
+#define S5PC100_PA_VIC_OFFSET	0x100000
+#define S5PC100_VA_VIC_OFFSET	0x10000
+#define S5PC1XX_PA_VIC(x)	(S5PC100_PA_VIC + ((x) * S5PC100_PA_VIC_OFFSET))
+#define S5PC1XX_VA_VIC(x)	(S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET))
+
+/* Timer */
+#define S5PC100_PA_TIMER	(0xEA000000)
+#define S5PC1XX_PA_TIMER	S5PC100_PA_TIMER
+#define S5PC1XX_VA_TIMER	S3C_VA_TIMER
+
+/* UART */
+#define S5PC100_PA_UART		(0xEC000000)
+#define S5PC1XX_PA_UART		S5PC100_PA_UART
+#define S5PC1XX_VA_UART		S3C_VA_UART
+
+/* IIC */
+#define S5PC100_PA_IIC		(0xEC100000)
+
+/* ETC */
+#define S5PC100_PA_SDRAM	(0x20000000)
+
+/* compatibility defines. */
+#define S3C_PA_UART		S5PC100_PA_UART
+#define S3C_PA_UART0		(S5PC100_PA_UART + 0x0)
+#define S3C_PA_UART1		(S5PC100_PA_UART + 0x400)
+#define S3C_PA_UART2		(S5PC100_PA_UART + 0x800)
+#define S3C_PA_UART3		(S5PC100_PA_UART + 0xC00)
+#define S3C_VA_UART0		(S3C_VA_UART + 0x0)
+#define S3C_VA_UART1		(S3C_VA_UART + 0x400)
+#define S3C_VA_UART2		(S3C_VA_UART + 0x800)
+#define S3C_VA_UART3		(S3C_VA_UART + 0xC00)
+#define S3C_UART_OFFSET		0x400
+#define S3C_VA_VIC0		(S3C_VA_IRQ + 0x0)
+#define S3C_VA_VIC1		(S3C_VA_IRQ + 0x10000)
+#define S3C_VA_VIC2		(S3C_VA_IRQ + 0x20000)
+#define S3C_PA_IIC		S5PC100_PA_IIC
+
+#endif /* __ASM_ARCH_C100_MAP_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/memory.h b/arch/arm/mach-s5pc100/include/mach/memory.h
new file mode 100644
index 00000000000..4b60d18179f
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/memory.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-s5pc100/include/mach/memory.h
+ *
+ * Copyright 2008 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6400/include/mach/memory.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET     	UL(0x20000000)
+
+#endif
-- 
cgit v1.2.3


From 433a915fc6456ee3a4b740fe4d92caa78164fdce Mon Sep 17 00:00:00 2001
From: Byungho Min <bhminjames@gmail.com>
Date: Tue, 23 Jun 2009 21:40:09 +0900
Subject: ARM: S5PC100: UART and Serial

Serial driver of S5PC100 is the same as S3C6400, so S5PC100 shares the serial
driver with S3C6400. Uart driver is copied from plat-s3c64xx to plat-s5pc1xx,
as I do not use plat-s3c64xx directory.

Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: title fixup]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s5pc1xx/dev-uart.c | 174 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 174 insertions(+)
 create mode 100644 arch/arm/plat-s5pc1xx/dev-uart.c

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s5pc1xx/dev-uart.c b/arch/arm/plat-s5pc1xx/dev-uart.c
new file mode 100644
index 00000000000..f749bc5407b
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/dev-uart.c
@@ -0,0 +1,174 @@
+/* linux/arch/arm/plat-s5pc1xx/dev-uart.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * Based on plat-s3c64xx/dev-uart.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+/* Serial port registrations */
+
+/* 64xx uarts are closer together */
+
+static struct resource s5pc1xx_uart0_resource[] = {
+	[0] = {
+		.start	= S3C_PA_UART0,
+		.end	= S3C_PA_UART0 + 0x100,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S3CUART_RX0,
+		.end	= IRQ_S3CUART_RX0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S3CUART_TX0,
+		.end	= IRQ_S3CUART_TX0,
+		.flags	= IORESOURCE_IRQ,
+
+	},
+	[3] = {
+		.start	= IRQ_S3CUART_ERR0,
+		.end	= IRQ_S3CUART_ERR0,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct resource s5pc1xx_uart1_resource[] = {
+	[0] = {
+		.start = S3C_PA_UART1,
+		.end   = S3C_PA_UART1 + 0x100,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S3CUART_RX1,
+		.end	= IRQ_S3CUART_RX1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S3CUART_TX1,
+		.end	= IRQ_S3CUART_TX1,
+		.flags	= IORESOURCE_IRQ,
+
+	},
+	[3] = {
+		.start	= IRQ_S3CUART_ERR1,
+		.end	= IRQ_S3CUART_ERR1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource s5pc1xx_uart2_resource[] = {
+	[0] = {
+		.start = S3C_PA_UART2,
+		.end   = S3C_PA_UART2 + 0x100,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S3CUART_RX2,
+		.end	= IRQ_S3CUART_RX2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S3CUART_TX2,
+		.end	= IRQ_S3CUART_TX2,
+		.flags	= IORESOURCE_IRQ,
+
+	},
+	[3] = {
+		.start	= IRQ_S3CUART_ERR2,
+		.end	= IRQ_S3CUART_ERR2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource s5pc1xx_uart3_resource[] = {
+	[0] = {
+		.start = S3C_PA_UART3,
+		.end   = S3C_PA_UART3 + 0x100,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S3CUART_RX3,
+		.end	= IRQ_S3CUART_RX3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S3CUART_TX3,
+		.end	= IRQ_S3CUART_TX3,
+		.flags	= IORESOURCE_IRQ,
+
+	},
+	[3] = {
+		.start	= IRQ_S3CUART_ERR3,
+		.end	= IRQ_S3CUART_ERR3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+
+struct s3c24xx_uart_resources s5pc1xx_uart_resources[] __initdata = {
+	[0] = {
+		.resources	= s5pc1xx_uart0_resource,
+		.nr_resources	= ARRAY_SIZE(s5pc1xx_uart0_resource),
+	},
+	[1] = {
+		.resources	= s5pc1xx_uart1_resource,
+		.nr_resources	= ARRAY_SIZE(s5pc1xx_uart1_resource),
+	},
+	[2] = {
+		.resources	= s5pc1xx_uart2_resource,
+		.nr_resources	= ARRAY_SIZE(s5pc1xx_uart2_resource),
+	},
+	[3] = {
+		.resources	= s5pc1xx_uart3_resource,
+		.nr_resources	= ARRAY_SIZE(s5pc1xx_uart3_resource),
+	},
+};
+
+/* uart devices */
+
+static struct platform_device s3c24xx_uart_device0 = {
+	.id		= 0,
+};
+
+static struct platform_device s3c24xx_uart_device1 = {
+	.id		= 1,
+};
+
+static struct platform_device s3c24xx_uart_device2 = {
+	.id		= 2,
+};
+
+static struct platform_device s3c24xx_uart_device3 = {
+	.id		= 3,
+};
+
+struct platform_device *s3c24xx_uart_src[4] = {
+	&s3c24xx_uart_device0,
+	&s3c24xx_uart_device1,
+	&s3c24xx_uart_device2,
+	&s3c24xx_uart_device3,
+};
+
+struct platform_device *s3c24xx_uart_devs[4] = {
+};
+
-- 
cgit v1.2.3


From 8acd1ade2ede18408303c968e1449220c427a182 Mon Sep 17 00:00:00 2001
From: Byungho Min <bhminjames@gmail.com>
Date: Tue, 23 Jun 2009 21:40:15 +0900
Subject: ARM: S5PC100: CPU initialization

Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: subject fixup]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s5pc100/cpu.c                      |  97 ++++++++++++++++++++
 arch/arm/mach-s5pc100/include/mach/debug-macro.S |  38 ++++++++
 arch/arm/mach-s5pc100/include/mach/entry-macro.S |  50 ++++++++++
 arch/arm/mach-s5pc100/include/mach/hardware.h    |  14 +++
 arch/arm/mach-s5pc100/include/mach/system.h      |  24 +++++
 arch/arm/mach-s5pc100/include/mach/uncompress.h  |  28 ++++++
 arch/arm/plat-s5pc1xx/cpu.c                      | 112 +++++++++++++++++++++++
 arch/arm/plat-s5pc1xx/include/plat/s5pc100.h     |  65 +++++++++++++
 arch/arm/plat-s5pc1xx/s5pc100-init.c             |  27 ++++++
 9 files changed, 455 insertions(+)
 create mode 100644 arch/arm/mach-s5pc100/cpu.c
 create mode 100644 arch/arm/mach-s5pc100/include/mach/debug-macro.S
 create mode 100644 arch/arm/mach-s5pc100/include/mach/entry-macro.S
 create mode 100644 arch/arm/mach-s5pc100/include/mach/hardware.h
 create mode 100644 arch/arm/mach-s5pc100/include/mach/system.h
 create mode 100644 arch/arm/mach-s5pc100/include/mach/uncompress.h
 create mode 100644 arch/arm/plat-s5pc1xx/cpu.c
 create mode 100644 arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
 create mode 100644 arch/arm/plat-s5pc1xx/s5pc100-init.c

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/cpu.c
new file mode 100644
index 00000000000..0e718890da3
--- /dev/null
+++ b/arch/arm/mach-s5pc100/cpu.c
@@ -0,0 +1,97 @@
+/* linux/arch/arm/mach-s5pc100/cpu.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6410/cpu.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <asm/irq.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/regs-serial.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/sdhci.h>
+#include <plat/iic-core.h>
+#include <plat/s5pc100.h>
+
+/* Initial IO mappings */
+
+static struct map_desc s5pc100_iodesc[] __initdata = {
+};
+
+/* s5pc100_map_io
+ *
+ * register the standard cpu IO areas
+*/
+
+void __init s5pc100_map_io(void)
+{
+	iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc));
+
+	/* initialise device information early */
+}
+
+void __init s5pc100_init_clocks(int xtal)
+{
+	printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
+	s3c24xx_register_baseclocks(xtal);
+	s5pc1xx_register_clocks();
+	s5pc100_register_clocks();
+	s5pc100_setup_clocks();
+}
+
+void __init s5pc100_init_irq(void)
+{
+	u32 vic_valid[] = {~0, ~0, ~0};
+
+	/* VIC0, VIC1, and VIC2 are fully populated. */
+	s5pc1xx_init_irq(vic_valid, ARRAY_SIZE(vic_valid));
+}
+
+struct sysdev_class s5pc100_sysclass = {
+	.name	= "s5pc100-core",
+};
+
+static struct sys_device s5pc100_sysdev = {
+	.cls	= &s5pc100_sysclass,
+};
+
+static int __init s5pc100_core_init(void)
+{
+	return sysdev_class_register(&s5pc100_sysclass);
+}
+
+core_initcall(s5pc100_core_init);
+
+int __init s5pc100_init(void)
+{
+	printk(KERN_DEBUG "S5PC100: Initialising architecture\n");
+
+	return sysdev_register(&s5pc100_sysdev);
+}
diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
new file mode 100644
index 00000000000..9d142ccf654
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
@@ -0,0 +1,38 @@
+/* arch/arm/mach-s5pc100/include/mach/debug-macro.S
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ *
+ * Based on mach-s3c6400/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <mach/map.h>
+#include <plat/regs-serial.h>
+
+	/* note, for the boot process to work we have to keep the UART
+	 * virtual address aligned to an 1MiB boundary for the L1
+	 * mapping the head code makes. We keep the UART virtual address
+	 * aligned and add in the offset when we load the value here.
+	 */
+
+	.macro addruart, rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1
+		ldreq	\rx, = S3C_PA_UART
+		ldrne	\rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
+		add	\rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+	.endm
+
+/* include the reset of the code which will do the work, we're only
+ * compiling for a single cpu processor type so the default of s3c2440
+ * will be fine with us.
+ */
+
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s5pc100/include/mach/entry-macro.S b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
new file mode 100644
index 00000000000..67131939e62
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
@@ -0,0 +1,50 @@
+/* arch/arm/mach-s5pc100/include/mach/entry-macro.S
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6400/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for the Samsung S5PC1XX series
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+#include <plat/irqs.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro	get_irqnr_preamble, base, tmp
+	ldr	\base, =S3C_VA_VIC0
+	.endm
+
+	.macro	arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+	@ check the vic0
+	mov	\irqnr, # S3C_IRQ_OFFSET + 31
+	ldr	\irqstat, [ \base, # VIC_IRQ_STATUS ]
+	teq	\irqstat, #0
+
+	@ otherwise try vic1
+	addeq	\tmp, \base, #(S3C_VA_VIC1 - S3C_VA_VIC0)
+	addeq	\irqnr, \irqnr, #32
+	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+	teqeq	\irqstat, #0
+
+	@ otherwise try vic2
+	addeq	\tmp, \base, #(S3C_VA_VIC2 - S3C_VA_VIC0)
+	addeq	\irqnr, \irqnr, #32
+	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+	teqeq	\irqstat, #0
+
+	clzne	\irqstat, \irqstat
+	subne	\irqnr, \irqnr, \irqstat
+	.endm
diff --git a/arch/arm/mach-s5pc100/include/mach/hardware.h b/arch/arm/mach-s5pc100/include/mach/hardware.h
new file mode 100644
index 00000000000..38ce8206a1a
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/hardware.h
@@ -0,0 +1,14 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/hardware.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S3C6400 - Hardware support
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h
new file mode 100644
index 00000000000..e3901437547
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/system.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/system.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - system implementation
+ *
+ * Based on mach-s3c6400/include/mach/system.h
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H __FILE__
+
+static void arch_idle(void)
+{
+	/* nothing here yet */
+}
+
+static void arch_reset(char mode, const char *cmd)
+{
+	/* nothing here yet */
+}
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/uncompress.h b/arch/arm/mach-s5pc100/include/mach/uncompress.h
new file mode 100644
index 00000000000..01ccf535e76
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/uncompress.h
@@ -0,0 +1,28 @@
+/* arch/arm/mach-s5pc100/include/mach/uncompress.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - uncompress code
+ *
+ * Based on mach-s3c6400/include/mach/uncompress.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/map.h>
+#include <plat/uncompress.h>
+
+static void arch_detect_cpu(void)
+{
+	/* we do not need to do any cpu detection here at the moment. */
+	fifo_mask = S3C2440_UFSTAT_TXMASK;
+	fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/plat-s5pc1xx/cpu.c b/arch/arm/plat-s5pc1xx/cpu.c
new file mode 100644
index 00000000000..715a7330794
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/cpu.c
@@ -0,0 +1,112 @@
+/* linux/arch/arm/plat-s5pc1xx/cpu.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX CPU Support
+ *
+ * Based on plat-s3c64xx/cpu.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <asm/mach/map.h>
+
+#include <plat/regs-serial.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+
+#include <plat/s5pc100.h>
+
+/* table of supported CPUs */
+
+static const char name_s5pc100[] = "S5PC100";
+
+static struct cpu_table cpu_ids[] __initdata = {
+	{
+		.idcode		= 0x43100000,
+		.idmask		= 0xfffff000,
+		.map_io		= s5pc100_map_io,
+		.init_clocks	= s5pc100_init_clocks,
+		.init_uarts	= s5pc100_init_uarts,
+		.init		= s5pc100_init,
+		.name		= name_s5pc100,
+	},
+};
+/* minimal IO mapping */
+
+/* see notes on uart map in arch/arm/mach-s5pc100/include/mach/debug-macro.S */
+#define UART_OFFS (S3C_PA_UART & 0xffff)
+
+static struct map_desc s5pc1xx_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5PC1XX_VA_CHIPID,
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_CHIPID),
+		.length		= SZ_16,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5PC1XX_VA_CLK,
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_CLK),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5PC1XX_VA_PWR,
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_PWR),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)(S5PC1XX_VA_UART),
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_UART),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5PC1XX_VA_VIC(0),
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_VIC(0)),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5PC1XX_VA_VIC(1),
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_VIC(1)),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5PC1XX_VA_VIC(2),
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_VIC(2)),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5PC1XX_VA_TIMER,
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_TIMER),
+		.length		= SZ_256,
+		.type		= MT_DEVICE,
+	},
+};
+
+/* read cpu identification code */
+
+void __init s5pc1xx_init_io(struct map_desc *mach_desc, int size)
+{
+	unsigned long idcode;
+
+	/* initialise the io descriptors we need for initialisation */
+	iotable_init(s5pc1xx_iodesc, ARRAY_SIZE(s5pc1xx_iodesc));
+	iotable_init(mach_desc, size);
+
+	idcode = __raw_readl(S5PC1XX_VA_CHIPID);
+	s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
diff --git a/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
new file mode 100644
index 00000000000..45e27513166
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
@@ -0,0 +1,65 @@
+/* arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * Header file for s5pc100 cpu support
+ *
+ * Based on plat-s3c64xx/include/plat/s3c6400.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S5PC100 related SoCs */
+extern  int s5pc100_init(void);
+extern void s5pc100_map_io(void);
+extern void s5pc100_init_clocks(int xtal);
+extern  int s5pc100_register_baseclocks(unsigned long xtal);
+extern void s5pc100_init_irq(void);
+extern void s5pc100_init_io(struct map_desc *mach_desc, int size);
+extern void s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s5pc100_register_clocks(void);
+extern void s5pc100_setup_clocks(void);
+extern struct sysdev_class s5pc100_sysclass;
+
+#define s5pc100_init_uarts s5pc100_common_init_uarts
+
+/* Some day, belows will be moved to plat-s5pc/include/plat/cpu.h */
+extern void s5pc1xx_init_irq(u32 *vic_valid, int num);
+extern void s5pc1xx_init_io(struct map_desc *mach_desc, int size);
+
+/* Some day, belows will be moved to plat-s5pc/include/plat/clock.h */
+extern struct clk clk_hpll;
+extern struct clk clk_hd0;
+extern struct clk clk_pd0;
+extern struct clk clk_54m;
+extern struct clk clk_dout_mpll2;
+extern void s5pc1xx_register_clocks(void);
+extern int s5pc1xx_sclk0_ctrl(struct clk *clk, int enable);
+extern int s5pc1xx_sclk1_ctrl(struct clk *clk, int enable);
+
+/* Some day, belows will be moved to plat-s5pc/include/plat/devs.h */
+extern struct s3c24xx_uart_resources s5pc1xx_uart_resources[];
+extern struct platform_device s3c_device_g2d;
+extern struct platform_device s3c_device_g3d;
+extern struct platform_device s3c_device_vpp;
+extern struct platform_device s3c_device_tvenc;
+extern struct platform_device s3c_device_tvscaler;
+extern struct platform_device s3c_device_rotator;
+extern struct platform_device s3c_device_jpeg;
+extern struct platform_device s3c_device_onenand;
+extern struct platform_device s3c_device_usb_otghcd;
+extern struct platform_device s3c_device_keypad;
+extern struct platform_device s3c_device_ts;
+extern struct platform_device s3c_device_g3d;
+extern struct platform_device s3c_device_smc911x;
+extern struct platform_device s3c_device_fimc0;
+extern struct platform_device s3c_device_fimc1;
+extern struct platform_device s3c_device_mfc;
+extern struct platform_device s3c_device_ac97;
+extern struct platform_device s3c_device_fimc0;
+extern struct platform_device s3c_device_fimc1;
+extern struct platform_device s3c_device_fimc2;
+
diff --git a/arch/arm/plat-s5pc1xx/s5pc100-init.c b/arch/arm/plat-s5pc1xx/s5pc100-init.c
new file mode 100644
index 00000000000..c58710884ce
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/s5pc100-init.c
@@ -0,0 +1,27 @@
+/* linux/arch/arm/plat-s5pc1xx/s5pc100-init.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - CPU initialisation (common with other S5PC1XX chips)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/s5pc100.h>
+
+/* uart registration process */
+
+void __init s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	/* The driver name is s3c6400-uart to reuse s3c6400_serial_drv  */
+	s3c24xx_init_uartdevs("s3c6400-uart", s5pc1xx_uart_resources, cfg, no);
+}
-- 
cgit v1.2.3


From 0164cbf4390fbcd7125fc8d476a451a3efa14c5d Mon Sep 17 00:00:00 2001
From: Byungho Min <bhminjames@gmail.com>
Date: Tue, 23 Jun 2009 21:40:22 +0900
Subject: ARM: S5PC100: GPIO and I2C

S5PC100 has more GPIO group then previous one. It has 34 groups of GPIO, while
S3C6410 has 17 groups. For now, only header files are written.

Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: subject fixup]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s5pc100/include/mach/gpio-core.h |  21 ++++
 arch/arm/mach-s5pc100/include/mach/gpio.h      | 146 +++++++++++++++++++++++++
 arch/arm/plat-s5pc1xx/setup-i2c0.c             |  25 +++++
 arch/arm/plat-s5pc1xx/setup-i2c1.c             |  25 +++++
 4 files changed, 217 insertions(+)
 create mode 100644 arch/arm/mach-s5pc100/include/mach/gpio-core.h
 create mode 100644 arch/arm/mach-s5pc100/include/mach/gpio.h
 create mode 100644 arch/arm/plat-s5pc1xx/setup-i2c0.c
 create mode 100644 arch/arm/plat-s5pc1xx/setup-i2c1.c

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s5pc100/include/mach/gpio-core.h b/arch/arm/mach-s5pc100/include/mach/gpio-core.h
new file mode 100644
index 00000000000..ad28d8ec8a7
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/gpio-core.h
@@ -0,0 +1,21 @@
+/* arch/arm/mach-s5pc100/include/mach/gpio-core.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - GPIO core support
+ *
+ * Based on mach-s3c6400/include/mach/gpio-core.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_CORE_H
+#define __ASM_ARCH_GPIO_CORE_H __FILE__
+
+/* currently we just include the platform support */
+#include <plat/gpio-core.h>
+
+#endif /* __ASM_ARCH_GPIO_CORE_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h
new file mode 100644
index 00000000000..c74fc93d7d1
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/gpio.h
@@ -0,0 +1,146 @@
+/* arch/arm/mach-s5pc100/include/mach/gpio.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - GPIO lib support
+ *
+ * Base on mach-s3c6400/include/mach/gpio.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#define gpio_to_irq	__gpio_to_irq
+
+/* GPIO bank sizes */
+#define S5PC1XX_GPIO_A0_NR	(8)
+#define S5PC1XX_GPIO_A1_NR	(5)
+#define S5PC1XX_GPIO_B_NR	(8)
+#define S5PC1XX_GPIO_C_NR	(5)
+#define S5PC1XX_GPIO_D_NR	(7)
+#define S5PC1XX_GPIO_E0_NR	(8)
+#define S5PC1XX_GPIO_E1_NR	(6)
+#define S5PC1XX_GPIO_F0_NR	(8)
+#define S5PC1XX_GPIO_F1_NR	(8)
+#define S5PC1XX_GPIO_F2_NR	(8)
+#define S5PC1XX_GPIO_F3_NR	(4)
+#define S5PC1XX_GPIO_G0_NR	(8)
+#define S5PC1XX_GPIO_G1_NR	(3)
+#define S5PC1XX_GPIO_G2_NR	(7)
+#define S5PC1XX_GPIO_G3_NR	(7)
+#define S5PC1XX_GPIO_H0_NR	(8)
+#define S5PC1XX_GPIO_H1_NR	(8)
+#define S5PC1XX_GPIO_H2_NR	(8)
+#define S5PC1XX_GPIO_H3_NR	(8)
+#define S5PC1XX_GPIO_I_NR	(8)
+#define S5PC1XX_GPIO_J0_NR	(8)
+#define S5PC1XX_GPIO_J1_NR	(5)
+#define S5PC1XX_GPIO_J2_NR	(8)
+#define S5PC1XX_GPIO_J3_NR	(8)
+#define S5PC1XX_GPIO_J4_NR	(4)
+#define S5PC1XX_GPIO_K0_NR	(8)
+#define S5PC1XX_GPIO_K1_NR	(6)
+#define S5PC1XX_GPIO_K2_NR	(8)
+#define S5PC1XX_GPIO_K3_NR	(8)
+#define S5PC1XX_GPIO_MP00_NR	(8)
+#define S5PC1XX_GPIO_MP01_NR	(8)
+#define S5PC1XX_GPIO_MP02_NR	(8)
+#define S5PC1XX_GPIO_MP03_NR	(8)
+#define S5PC1XX_GPIO_MP04_NR	(5)
+
+/* GPIO bank numbes */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+
+#define S5PC1XX_GPIO_NEXT(__gpio) \
+	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s3c_gpio_number {
+	S5PC1XX_GPIO_A0_START 	= 0,
+	S5PC1XX_GPIO_A1_START 	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A0),
+	S5PC1XX_GPIO_B_START 	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A1),
+	S5PC1XX_GPIO_C_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_B),
+	S5PC1XX_GPIO_D_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_C),
+	S5PC1XX_GPIO_E0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_D),
+	S5PC1XX_GPIO_E1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E0),
+	S5PC1XX_GPIO_F0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E1),
+	S5PC1XX_GPIO_F1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F0),
+	S5PC1XX_GPIO_F2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F1),
+	S5PC1XX_GPIO_F3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F2),
+	S5PC1XX_GPIO_G0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F3),
+	S5PC1XX_GPIO_G1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G0),
+	S5PC1XX_GPIO_G2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G1),
+	S5PC1XX_GPIO_G3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G2),
+	S5PC1XX_GPIO_H0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G3),
+	S5PC1XX_GPIO_H1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H0),
+	S5PC1XX_GPIO_H2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H1),
+	S5PC1XX_GPIO_H3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H2),
+	S5PC1XX_GPIO_I_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H3),
+	S5PC1XX_GPIO_J0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_I),
+	S5PC1XX_GPIO_J1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J0),
+	S5PC1XX_GPIO_J2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J1),
+	S5PC1XX_GPIO_J3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J2),
+	S5PC1XX_GPIO_J4_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J3),
+	S5PC1XX_GPIO_K0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J4),
+	S5PC1XX_GPIO_K1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K0),
+	S5PC1XX_GPIO_K2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K1),
+	S5PC1XX_GPIO_K3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K2),
+	S5PC1XX_GPIO_MP00_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K3),
+	S5PC1XX_GPIO_MP01_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP00),
+	S5PC1XX_GPIO_MP02_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP01),
+	S5PC1XX_GPIO_MP03_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP02),
+	S5PC1XX_GPIO_MP04_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP03),
+};
+
+/* S5PC1XX GPIO number definitions. */
+#define S5PC1XX_GPA0(_nr)	(S5PC1XX_GPIO_A0_START + (_nr))
+#define S5PC1XX_GPA1(_nr)	(S5PC1XX_GPIO_A1_START + (_nr))
+#define S5PC1XX_GPB(_nr)	(S5PC1XX_GPIO_B_START + (_nr))
+#define S5PC1XX_GPC(_nr)	(S5PC1XX_GPIO_C_START + (_nr))
+#define S5PC1XX_GPD(_nr)	(S5PC1XX_GPIO_D_START + (_nr))
+#define S5PC1XX_GPE0(_nr)	(S5PC1XX_GPIO_E0_START + (_nr))
+#define S5PC1XX_GPE1(_nr)	(S5PC1XX_GPIO_E1_START + (_nr))
+#define S5PC1XX_GPF0(_nr)	(S5PC1XX_GPIO_F0_START + (_nr))
+#define S5PC1XX_GPF1(_nr)	(S5PC1XX_GPIO_F1_START + (_nr))
+#define S5PC1XX_GPF2(_nr)	(S5PC1XX_GPIO_F2_START + (_nr))
+#define S5PC1XX_GPF3(_nr)	(S5PC1XX_GPIO_F3_START + (_nr))
+#define S5PC1XX_GPG0(_nr)	(S5PC1XX_GPIO_G0_START + (_nr))
+#define S5PC1XX_GPG1(_nr)	(S5PC1XX_GPIO_G1_START + (_nr))
+#define S5PC1XX_GPG2(_nr)	(S5PC1XX_GPIO_G2_START + (_nr))
+#define S5PC1XX_GPG3(_nr)	(S5PC1XX_GPIO_G3_START + (_nr))
+#define S5PC1XX_GPH0(_nr)	(S5PC1XX_GPIO_H0_START + (_nr))
+#define S5PC1XX_GPH1(_nr)	(S5PC1XX_GPIO_H1_START + (_nr))
+#define S5PC1XX_GPH2(_nr)	(S5PC1XX_GPIO_H2_START + (_nr))
+#define S5PC1XX_GPH3(_nr)	(S5PC1XX_GPIO_H3_START + (_nr))
+#define S5PC1XX_GPI(_nr)	(S5PC1XX_GPIO_I_START + (_nr))
+#define S5PC1XX_GPJ0(_nr)	(S5PC1XX_GPIO_J0_START + (_nr))
+#define S5PC1XX_GPJ1(_nr)	(S5PC1XX_GPIO_J1_START + (_nr))
+#define S5PC1XX_GPJ2(_nr)	(S5PC1XX_GPIO_J2_START + (_nr))
+#define S5PC1XX_GPJ3(_nr)	(S5PC1XX_GPIO_J3_START + (_nr))
+#define S5PC1XX_GPJ4(_nr)	(S5PC1XX_GPIO_J4_START + (_nr))
+#define S5PC1XX_GPK0(_nr)	(S5PC1XX_GPIO_K0_START + (_nr))
+#define S5PC1XX_GPK1(_nr)	(S5PC1XX_GPIO_K1_START + (_nr))
+#define S5PC1XX_GPK2(_nr)	(S5PC1XX_GPIO_K2_START + (_nr))
+#define S5PC1XX_GPK3(_nr)	(S5PC1XX_GPIO_K3_START + (_nr))
+#define S5PC1XX_MP00(_nr)	(S5PC1XX_GPIO_MP00_START + (_nr))
+#define S5PC1XX_MP01(_nr)	(S5PC1XX_GPIO_MP01_START + (_nr))
+#define S5PC1XX_MP02(_nr)	(S5PC1XX_GPIO_MP02_START + (_nr))
+#define S5PC1XX_MP03(_nr)	(S5PC1XX_GPIO_MP03_START + (_nr))
+#define S5PC1XX_MP04(_nr)	(S5PC1XX_GPIO_MP04_START + (_nr))
+
+/* the end of the S5PC1XX specific gpios */
+#define S5PC1XX_GPIO_END	(S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1)
+#define S3C_GPIO_END		S5PC1XX_GPIO_END
+
+/* define the number of gpios we need to the one after the MP04() range */
+#define ARCH_NR_GPIOS	(S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1)
+
+#include <asm-generic/gpio.h>
diff --git a/arch/arm/plat-s5pc1xx/setup-i2c0.c b/arch/arm/plat-s5pc1xx/setup-i2c0.c
new file mode 100644
index 00000000000..3d00c025fff
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/setup-i2c0.c
@@ -0,0 +1,25 @@
+/* linux/arch/arm/plat-s5pc1xx/setup-i2c0.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * Base S5PC1XX I2C bus 0 gpio configuration
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/iic.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+	/* Pin configuration would be needed */
+}
diff --git a/arch/arm/plat-s5pc1xx/setup-i2c1.c b/arch/arm/plat-s5pc1xx/setup-i2c1.c
new file mode 100644
index 00000000000..c8f3ca42f51
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/setup-i2c1.c
@@ -0,0 +1,25 @@
+/* linux/arch/arm/plat-s3c64xx/setup-i2c1.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * Base S5PC1XX I2C bus 1 gpio configuration
+ *
+ * Based on plat-s3c64xx/setup-i2c1.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/iic.h>
+
+void s3c_i2c1_cfg_gpio(struct platform_device *dev)
+{
+	/* Pin configuration would be needed */
+}
-- 
cgit v1.2.3


From c9b870e7e796eea515a261a314917317ebb1cb4a Mon Sep 17 00:00:00 2001
From: Byungho Min <bhminjames@gmail.com>
Date: Tue, 23 Jun 2009 21:40:03 +0900
Subject: ARM: S5PC100: IRQ and timer

S5PC100 has 3 VICs(Vectored Interrupt Controller). The VICs come from S3C64xx
series, so the driver source code can be shared with S3C families. The S5PC100
has 3 VICs while S3C64xx has only 2.

Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: subject fixup]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s5pc100/include/mach/irqs.h      |  14 ++
 arch/arm/mach-s5pc100/include/mach/pwm-clock.h |  56 ++++++
 arch/arm/mach-s5pc100/include/mach/regs-irq.h  |  24 +++
 arch/arm/mach-s5pc100/include/mach/tick.h      |  29 +++
 arch/arm/plat-s5pc1xx/include/plat/irqs.h      | 182 +++++++++++++++++
 arch/arm/plat-s5pc1xx/irq.c                    | 259 +++++++++++++++++++++++++
 6 files changed, 564 insertions(+)
 create mode 100644 arch/arm/mach-s5pc100/include/mach/irqs.h
 create mode 100644 arch/arm/mach-s5pc100/include/mach/pwm-clock.h
 create mode 100644 arch/arm/mach-s5pc100/include/mach/regs-irq.h
 create mode 100644 arch/arm/mach-s5pc100/include/mach/tick.h
 create mode 100644 arch/arm/plat-s5pc1xx/include/plat/irqs.h
 create mode 100644 arch/arm/plat-s5pc1xx/irq.c

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h
new file mode 100644
index 00000000000..622720dba28
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/irqs.h
@@ -0,0 +1,14 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/irqs.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - IRQ definitions
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+#include <plat/irqs.h>
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/pwm-clock.h b/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
new file mode 100644
index 00000000000..b34d2f7aae5
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
@@ -0,0 +1,56 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - pwm clock and timer support
+ *
+ * Based on mach-s3c6400/include/mach/pwm-clock.h
+ */
+
+/**
+ * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
+ * @tcfg: The timer TCFG1 register bits shifted down to 0.
+ *
+ * Return true if the given configuration from TCFG1 is a TCLK instead
+ * any of the TDIV clocks.
+ */
+static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
+{
+	return tcfg >= S3C64XX_TCFG1_MUX_TCLK;
+}
+
+/**
+ * tcfg_to_divisor() - convert tcfg1 setting to a divisor
+ * @tcfg1: The tcfg1 setting, shifted down.
+ *
+ * Get the divisor value for the given tcfg1 setting. We assume the
+ * caller has already checked to see if this is not a TCLK source.
+ */
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+	return 1 << tcfg1;
+}
+
+/**
+ * pwm_tdiv_has_div1() - does the tdiv setting have a /1
+ *
+ * Return true if we have a /1 in the tdiv setting.
+ */
+static inline unsigned int pwm_tdiv_has_div1(void)
+{
+	return 1;
+}
+
+/**
+ * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
+ * @div: The divisor to calculate the bit information for.
+ *
+ * Turn a divisor into the necessary bit field for TCFG1.
+ */
+static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
+{
+	return ilog2(div);
+}
+
+#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-irq.h b/arch/arm/mach-s5pc100/include/mach/regs-irq.h
new file mode 100644
index 00000000000..751ac15438c
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/regs-irq.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/regs-irq.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - IRQ register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+#include <mach/map.h>
+#include <asm/hardware/vic.h>
+
+/* interrupt controller */
+#define S5PC1XX_VIC0REG(x)          		((x) + S5PC1XX_VA_VIC(0))
+#define S5PC1XX_VIC1REG(x)          		((x) + S5PC1XX_VA_VIC(1))
+#define S5PC1XX_VIC2REG(x)         		((x) + S5PC1XX_VA_VIC(2))
+
+#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/tick.h b/arch/arm/mach-s5pc100/include/mach/tick.h
new file mode 100644
index 00000000000..d3de0f3591a
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/tick.h
@@ -0,0 +1,29 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/tick.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * S3C64XX - Timer tick support definitions
+ *
+ * Based on mach-s3c6400/include/mach/tick.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TICK_H
+#define __ASM_ARCH_TICK_H __FILE__
+
+/* note, the timer interrutps turn up in 2 places, the vic and then
+ * the timer block. We take the VIC as the base at the moment.
+ */
+static inline u32 s3c24xx_ostimer_pending(void)
+{
+	u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS);
+	return pend & 1 << (IRQ_TIMER4 - S5PC1XX_IRQ_VIC0(0));
+}
+
+#define TICK_MAX	(0xffffffff)
+
+#endif /* __ASM_ARCH_TICK_H */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/irqs.h b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
new file mode 100644
index 00000000000..f07d8c3b25d
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
@@ -0,0 +1,182 @@
+/* linux/arch/arm/plat-s5pc1xx/include/plat/irqs.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - Common IRQ support
+ *
+ * Based on plat-s3c64xx/include/plat/irqs.h
+ */
+
+#ifndef __ASM_PLAT_S5PC1XX_IRQS_H
+#define __ASM_PLAT_S5PC1XX_IRQS_H __FILE__
+
+/* we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ *
+ * note, since we're using the VICs, our start must be a
+ * mulitple of 32 to allow the common code to work
+ */
+
+#define S3C_IRQ_OFFSET		(32)
+
+#define S3C_IRQ(x)		((x) + S3C_IRQ_OFFSET)
+
+#define S3C_VIC0_BASE		S3C_IRQ(0)
+#define S3C_VIC1_BASE		S3C_IRQ(32)
+#define S3C_VIC2_BASE		S3C_IRQ(64)
+
+/* UART interrupts, each UART has 4 intterupts per channel so
+ * use the space between the ISA and S3C main interrupts. Note, these
+ * are not in the same order as the S3C24XX series! */
+
+#define IRQ_S3CUART_BASE0	(16)
+#define IRQ_S3CUART_BASE1	(20)
+#define IRQ_S3CUART_BASE2	(24)
+#define IRQ_S3CUART_BASE3	(28)
+
+#define UART_IRQ_RXD		(0)
+#define UART_IRQ_ERR		(1)
+#define UART_IRQ_TXD		(2)
+#define UART_IRQ_MODEM		(3)
+
+#define IRQ_S3CUART_RX0		(IRQ_S3CUART_BASE0 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX0		(IRQ_S3CUART_BASE0 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR0	(IRQ_S3CUART_BASE0 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX1		(IRQ_S3CUART_BASE1 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX1		(IRQ_S3CUART_BASE1 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR1	(IRQ_S3CUART_BASE1 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX2		(IRQ_S3CUART_BASE2 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX2		(IRQ_S3CUART_BASE2 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR2	(IRQ_S3CUART_BASE2 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX3		(IRQ_S3CUART_BASE3 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX3		(IRQ_S3CUART_BASE3 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR3	(IRQ_S3CUART_BASE3 + UART_IRQ_ERR)
+
+/* VIC based IRQs */
+
+#define S5PC1XX_IRQ_VIC0(x)	(S3C_VIC0_BASE + (x))
+#define S5PC1XX_IRQ_VIC1(x)	(S3C_VIC1_BASE + (x))
+#define S5PC1XX_IRQ_VIC2(x)	(S3C_VIC2_BASE + (x))
+
+/*
+ * VIC0: system, DMA, timer
+ */
+#define IRQ_EINT0		S5PC1XX_IRQ_VIC0(0)
+#define IRQ_EINT1		S5PC1XX_IRQ_VIC0(1)
+#define IRQ_EINT2		S5PC1XX_IRQ_VIC0(2)
+#define IRQ_EINT3		S5PC1XX_IRQ_VIC0(3)
+#define IRQ_EINT4		S5PC1XX_IRQ_VIC0(4)
+#define IRQ_EINT5		S5PC1XX_IRQ_VIC0(5)
+#define IRQ_EINT6		S5PC1XX_IRQ_VIC0(6)
+#define IRQ_EINT7		S5PC1XX_IRQ_VIC0(7)
+#define IRQ_EINT8		S5PC1XX_IRQ_VIC0(8)
+#define IRQ_EINT9		S5PC1XX_IRQ_VIC0(9)
+#define IRQ_EINT10		S5PC1XX_IRQ_VIC0(10)
+#define IRQ_EINT11		S5PC1XX_IRQ_VIC0(11)
+#define IRQ_EINT12		S5PC1XX_IRQ_VIC0(12)
+#define IRQ_EINT13		S5PC1XX_IRQ_VIC0(13)
+#define IRQ_EINT14		S5PC1XX_IRQ_VIC0(14)
+#define IRQ_EINT15		S5PC1XX_IRQ_VIC0(15)
+#define IRQ_EINT16_31		S5PC1XX_IRQ_VIC0(16)
+#define IRQ_BATF		S5PC1XX_IRQ_VIC0(17)
+#define IRQ_MDMA		S5PC1XX_IRQ_VIC0(18)
+#define IRQ_PDMA0		S5PC1XX_IRQ_VIC0(19)
+#define IRQ_PDMA1		S5PC1XX_IRQ_VIC0(20)
+#define IRQ_TIMER0		S5PC1XX_IRQ_VIC0(21)
+#define IRQ_TIMER1		S5PC1XX_IRQ_VIC0(22)
+#define IRQ_TIMER2		S5PC1XX_IRQ_VIC0(23)
+#define IRQ_TIMER3		S5PC1XX_IRQ_VIC0(24)
+#define IRQ_TIMER4		S5PC1XX_IRQ_VIC0(25)
+#define IRQ_SYSTIMER		S5PC1XX_IRQ_VIC0(26)
+#define IRQ_WDT			S5PC1XX_IRQ_VIC0(27)
+#define IRQ_RTC_ALARM		S5PC1XX_IRQ_VIC0(28)
+#define IRQ_RTC_TIC		S5PC1XX_IRQ_VIC0(29)
+#define IRQ_GPIOINT		S5PC1XX_IRQ_VIC0(30)
+
+/*
+ * VIC1: ARM, power, memory, connectivity
+ */
+#define IRQ_CORTEX0		S5PC1XX_IRQ_VIC1(0)
+#define IRQ_CORTEX1		S5PC1XX_IRQ_VIC1(1)
+#define IRQ_CORTEX2		S5PC1XX_IRQ_VIC1(2)
+#define IRQ_CORTEX3		S5PC1XX_IRQ_VIC1(3)
+#define IRQ_CORTEX4		S5PC1XX_IRQ_VIC1(4)
+#define IRQ_IEMAPC		S5PC1XX_IRQ_VIC1(5)
+#define IRQ_IEMIEC		S5PC1XX_IRQ_VIC1(6)
+#define IRQ_ONENAND		S5PC1XX_IRQ_VIC1(7)
+#define IRQ_NFC			S5PC1XX_IRQ_VIC1(8)
+#define IRQ_CFC			S5PC1XX_IRQ_VIC1(9)
+#define IRQ_UART0		S5PC1XX_IRQ_VIC1(10)
+#define IRQ_UART1		S5PC1XX_IRQ_VIC1(11)
+#define IRQ_UART2		S5PC1XX_IRQ_VIC1(12)
+#define IRQ_UART3		S5PC1XX_IRQ_VIC1(13)
+#define IRQ_IIC			S5PC1XX_IRQ_VIC1(14)
+#define IRQ_SPI0		S5PC1XX_IRQ_VIC1(15)
+#define IRQ_SPI1		S5PC1XX_IRQ_VIC1(16)
+#define IRQ_SPI2		S5PC1XX_IRQ_VIC1(17)
+#define IRQ_IRDA		S5PC1XX_IRQ_VIC1(18)
+#define IRQ_CAN0		S5PC1XX_IRQ_VIC1(19)
+#define IRQ_CAN1		S5PC1XX_IRQ_VIC1(20)
+#define IRQ_HSIRX		S5PC1XX_IRQ_VIC1(21)
+#define IRQ_HSITX		S5PC1XX_IRQ_VIC1(22)
+#define IRQ_UHOST		S5PC1XX_IRQ_VIC1(23)
+#define IRQ_OTG			S5PC1XX_IRQ_VIC1(24)
+#define IRQ_MSM			S5PC1XX_IRQ_VIC1(25)
+#define IRQ_HSMMC0		S5PC1XX_IRQ_VIC1(26)
+#define IRQ_HSMMC1		S5PC1XX_IRQ_VIC1(27)
+#define IRQ_HSMMC2		S5PC1XX_IRQ_VIC1(28)
+#define IRQ_MIPICSI		S5PC1XX_IRQ_VIC1(29)
+#define IRQ_MIPIDSI		S5PC1XX_IRQ_VIC1(30)
+
+/*
+ * VIC2: multimedia, audio, security
+ */
+#define IRQ_LCD0		S5PC1XX_IRQ_VIC2(0)
+#define IRQ_LCD1		S5PC1XX_IRQ_VIC2(1)
+#define IRQ_LCD2		S5PC1XX_IRQ_VIC2(2)
+#define IRQ_LCD3		S5PC1XX_IRQ_VIC2(3)
+#define IRQ_ROTATOR		S5PC1XX_IRQ_VIC2(4)
+#define IRQ_FIMC0		S5PC1XX_IRQ_VIC2(5)
+#define IRQ_FIMC1		S5PC1XX_IRQ_VIC2(6)
+#define IRQ_FIMC2		S5PC1XX_IRQ_VIC2(7)
+#define IRQ_JPEG		S5PC1XX_IRQ_VIC2(8)
+#define IRQ_2D			S5PC1XX_IRQ_VIC2(9)
+#define IRQ_3D			S5PC1XX_IRQ_VIC2(10)
+#define IRQ_MIXER		S5PC1XX_IRQ_VIC2(11)
+#define IRQ_HDMI		S5PC1XX_IRQ_VIC2(12)
+#define IRQ_IIC1		S5PC1XX_IRQ_VIC2(13)
+#define IRQ_MFC			S5PC1XX_IRQ_VIC2(14)
+#define IRQ_TVENC		S5PC1XX_IRQ_VIC2(15)
+#define IRQ_I2S0		S5PC1XX_IRQ_VIC2(16)
+#define IRQ_I2S1		S5PC1XX_IRQ_VIC2(17)
+#define IRQ_I2S2		S5PC1XX_IRQ_VIC2(18)
+#define IRQ_AC97		S5PC1XX_IRQ_VIC2(19)
+#define IRQ_PCM0		S5PC1XX_IRQ_VIC2(20)
+#define IRQ_PCM1		S5PC1XX_IRQ_VIC2(21)
+#define IRQ_SPDIF		S5PC1XX_IRQ_VIC2(22)
+#define IRQ_ADC			S5PC1XX_IRQ_VIC2(23)
+#define IRQ_PENDN		S5PC1XX_IRQ_VIC2(24)
+#define IRQ_TC			IRQ_PENDN
+#define IRQ_KEYPAD		S5PC1XX_IRQ_VIC2(25)
+#define IRQ_CG			S5PC1XX_IRQ_VIC2(26)
+#define IRQ_SEC			S5PC1XX_IRQ_VIC2(27)
+#define IRQ_SECRX		S5PC1XX_IRQ_VIC2(28)
+#define IRQ_SECTX		S5PC1XX_IRQ_VIC2(29)
+#define IRQ_SDMIRQ		S5PC1XX_IRQ_VIC2(30)
+#define IRQ_SDMFIQ		S5PC1XX_IRQ_VIC2(31)
+
+#define S3C_IRQ_EINT_BASE	(IRQ_SDMFIQ + 1)
+
+#define S3C_EINT(x)		((x) + S3C_IRQ_EINT_BASE)
+#define IRQ_EINT(x)		S3C_EINT(x)
+
+#define NR_IRQS 		(IRQ_EINT(31)+1)
+
+#endif /* __ASM_PLAT_S5PC1XX_IRQS_H */
+
diff --git a/arch/arm/plat-s5pc1xx/irq.c b/arch/arm/plat-s5pc1xx/irq.c
new file mode 100644
index 00000000000..80d6dd942cb
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/irq.c
@@ -0,0 +1,259 @@
+/* arch/arm/plat-s5pc1xx/irq.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - Interrupt handling
+ *
+ * Based on plat-s3c64xx/irq.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/hardware/vic.h>
+
+#include <mach/map.h>
+#include <plat/regs-timer.h>
+#include <plat/cpu.h>
+
+/* Timer interrupt handling */
+
+static void s3c_irq_demux_timer(unsigned int base_irq, unsigned int sub_irq)
+{
+	generic_handle_irq(sub_irq);
+}
+
+static void s3c_irq_demux_timer0(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_timer(irq, IRQ_TIMER0);
+}
+
+static void s3c_irq_demux_timer1(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_timer(irq, IRQ_TIMER1);
+}
+
+static void s3c_irq_demux_timer2(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_timer(irq, IRQ_TIMER2);
+}
+
+static void s3c_irq_demux_timer3(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_timer(irq, IRQ_TIMER3);
+}
+
+static void s3c_irq_demux_timer4(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_timer(irq, IRQ_TIMER4);
+}
+
+/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */
+
+static void s3c_irq_timer_mask(unsigned int irq)
+{
+	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+	reg &= 0x1f;  /* mask out pending interrupts */
+	reg &= ~(1 << (irq - IRQ_TIMER0));
+	__raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static void s3c_irq_timer_unmask(unsigned int irq)
+{
+	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+	reg &= 0x1f;  /* mask out pending interrupts */
+	reg |= 1 << (irq - IRQ_TIMER0);
+	__raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static void s3c_irq_timer_ack(unsigned int irq)
+{
+	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+	reg &= 0x1f;
+	reg |= (1 << 5) << (irq - IRQ_TIMER0);
+	__raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static struct irq_chip s3c_irq_timer = {
+	.name		= "s3c-timer",
+	.mask		= s3c_irq_timer_mask,
+	.unmask		= s3c_irq_timer_unmask,
+	.ack		= s3c_irq_timer_ack,
+};
+
+struct uart_irq {
+	void __iomem	*regs;
+	unsigned int	 base_irq;
+	unsigned int	 parent_irq;
+};
+
+/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
+ * are consecutive when looking up the interrupt in the demux routines.
+ */
+static struct uart_irq uart_irqs[] = {
+	[0] = {
+		.regs		= (void *)S3C_VA_UART0,
+		.base_irq	= IRQ_S3CUART_BASE0,
+		.parent_irq	= IRQ_UART0,
+	},
+	[1] = {
+		.regs		= (void *)S3C_VA_UART1,
+		.base_irq	= IRQ_S3CUART_BASE1,
+		.parent_irq	= IRQ_UART1,
+	},
+	[2] = {
+		.regs		= (void *)S3C_VA_UART2,
+		.base_irq	= IRQ_S3CUART_BASE2,
+		.parent_irq	= IRQ_UART2,
+	},
+	[3] = {
+		.regs		= (void *)S3C_VA_UART3,
+		.base_irq	= IRQ_S3CUART_BASE3,
+		.parent_irq	= IRQ_UART3,
+	},
+};
+
+static inline void __iomem *s3c_irq_uart_base(unsigned int irq)
+{
+	struct uart_irq *uirq = get_irq_chip_data(irq);
+	return uirq->regs;
+}
+
+static inline unsigned int s3c_irq_uart_bit(unsigned int irq)
+{
+	return irq & 3;
+}
+
+/* UART interrupt registers, not worth adding to seperate include header */
+#define S3C64XX_UINTP	0x30
+#define S3C64XX_UINTSP	0x34
+#define S3C64XX_UINTM	0x38
+
+static void s3c_irq_uart_mask(unsigned int irq)
+{
+	void __iomem *regs = s3c_irq_uart_base(irq);
+	unsigned int bit = s3c_irq_uart_bit(irq);
+	u32 reg;
+
+	reg = __raw_readl(regs + S3C64XX_UINTM);
+	reg |= (1 << bit);
+	__raw_writel(reg, regs + S3C64XX_UINTM);
+}
+
+static void s3c_irq_uart_maskack(unsigned int irq)
+{
+	void __iomem *regs = s3c_irq_uart_base(irq);
+	unsigned int bit = s3c_irq_uart_bit(irq);
+	u32 reg;
+
+	reg = __raw_readl(regs + S3C64XX_UINTM);
+	reg |= (1 << bit);
+	__raw_writel(reg, regs + S3C64XX_UINTM);
+	__raw_writel(1 << bit, regs + S3C64XX_UINTP);
+}
+
+static void s3c_irq_uart_unmask(unsigned int irq)
+{
+	void __iomem *regs = s3c_irq_uart_base(irq);
+	unsigned int bit = s3c_irq_uart_bit(irq);
+	u32 reg;
+
+	reg = __raw_readl(regs + S3C64XX_UINTM);
+	reg &= ~(1 << bit);
+	__raw_writel(reg, regs + S3C64XX_UINTM);
+}
+
+static void s3c_irq_uart_ack(unsigned int irq)
+{
+	void __iomem *regs = s3c_irq_uart_base(irq);
+	unsigned int bit = s3c_irq_uart_bit(irq);
+
+	__raw_writel(1 << bit, regs + S3C64XX_UINTP);
+}
+
+static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc)
+{
+	struct uart_irq *uirq = &uart_irqs[irq - IRQ_UART0];
+	u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP);
+	int base = uirq->base_irq;
+
+	if (pend & (1 << 0))
+		generic_handle_irq(base);
+	if (pend & (1 << 1))
+		generic_handle_irq(base + 1);
+	if (pend & (1 << 2))
+		generic_handle_irq(base + 2);
+	if (pend & (1 << 3))
+		generic_handle_irq(base + 3);
+}
+
+static struct irq_chip s3c_irq_uart = {
+	.name		= "s3c-uart",
+	.mask		= s3c_irq_uart_mask,
+	.unmask		= s3c_irq_uart_unmask,
+	.mask_ack	= s3c_irq_uart_maskack,
+	.ack		= s3c_irq_uart_ack,
+};
+
+static void __init s5pc1xx_uart_irq(struct uart_irq *uirq)
+{
+	void __iomem *reg_base = uirq->regs;
+	unsigned int irq;
+	int offs;
+
+	/* mask all interrupts at the start. */
+	__raw_writel(0xf, reg_base + S3C64XX_UINTM);
+
+	for (offs = 0; offs < 3; offs++) {
+		irq = uirq->base_irq + offs;
+
+		set_irq_chip(irq, &s3c_irq_uart);
+		set_irq_chip_data(irq, uirq);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	set_irq_chained_handler(uirq->parent_irq, s3c_irq_demux_uart);
+}
+
+void __init s5pc1xx_init_irq(u32 *vic_valid, int num)
+{
+	int i;
+	int uart, irq;
+
+	printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
+
+	/* initialise the pair of VICs */
+	for (i = 0; i < num; i++)
+		vic_init((void *)S5PC1XX_VA_VIC(i), S3C_IRQ(i * S3C_IRQ_OFFSET),
+				vic_valid[i], 0);
+
+	/* add the timer sub-irqs */
+
+	set_irq_chained_handler(IRQ_TIMER0, s3c_irq_demux_timer0);
+	set_irq_chained_handler(IRQ_TIMER1, s3c_irq_demux_timer1);
+	set_irq_chained_handler(IRQ_TIMER2, s3c_irq_demux_timer2);
+	set_irq_chained_handler(IRQ_TIMER3, s3c_irq_demux_timer3);
+	set_irq_chained_handler(IRQ_TIMER4, s3c_irq_demux_timer4);
+
+	for (irq = IRQ_TIMER0; irq <= IRQ_TIMER4; irq++) {
+		set_irq_chip(irq, &s3c_irq_timer);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	for (uart = 0; uart < ARRAY_SIZE(uart_irqs); uart++)
+		s5pc1xx_uart_irq(&uart_irqs[uart]);
+}
+
+
-- 
cgit v1.2.3


From c1cc3db8e9fcf1c9d2db3f34552c73996d3d8a13 Mon Sep 17 00:00:00 2001
From: Byungho Min <bhminjames@gmail.com>
Date: Tue, 23 Jun 2009 21:39:56 +0900
Subject: ARM: S5PC100: Clock and PLL support

S5PC100 has 4 PLLs (APLL,MPLL,EPLL,HPLL) and 3 clock domains. Clock scheme is
implemented here.

Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: edited title]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s5pc1xx/include/plat/pll.h        |   38 +
 arch/arm/plat-s5pc1xx/include/plat/regs-clock.h |  421 +++++++++
 arch/arm/plat-s5pc1xx/s5pc100-clock.c           | 1139 +++++++++++++++++++++++
 3 files changed, 1598 insertions(+)
 create mode 100644 arch/arm/plat-s5pc1xx/include/plat/pll.h
 create mode 100644 arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
 create mode 100644 arch/arm/plat-s5pc1xx/s5pc100-clock.c

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s5pc1xx/include/plat/pll.h b/arch/arm/plat-s5pc1xx/include/plat/pll.h
new file mode 100644
index 00000000000..21afef1573e
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/pll.h
@@ -0,0 +1,38 @@
+/* arch/arm/plat-s5pc1xx/include/plat/pll.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX PLL code
+ *
+ * Based on plat-s3c64xx/include/plat/pll.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S5P_PLL_MDIV_MASK	((1 << (25-16+1)) - 1)
+#define S5P_PLL_PDIV_MASK	((1 << (13-8+1)) - 1)
+#define S5P_PLL_SDIV_MASK	((1 << (2-0+1)) - 1)
+#define S5P_PLL_MDIV_SHIFT	(16)
+#define S5P_PLL_PDIV_SHIFT	(8)
+#define S5P_PLL_SDIV_SHIFT	(0)
+
+#include <asm/div64.h>
+
+static inline unsigned long s5pc1xx_get_pll(unsigned long baseclk,
+					    u32 pllcon)
+{
+	u32 mdiv, pdiv, sdiv;
+	u64 fvco = baseclk;
+
+	mdiv = (pllcon >> S5P_PLL_MDIV_SHIFT) & S5P_PLL_MDIV_MASK;
+	pdiv = (pllcon >> S5P_PLL_PDIV_SHIFT) & S5P_PLL_PDIV_MASK;
+	sdiv = (pllcon >> S5P_PLL_SDIV_SHIFT) & S5P_PLL_SDIV_MASK;
+
+	fvco *= mdiv;
+	do_div(fvco, (pdiv << sdiv));
+
+	return (unsigned long)fvco;
+}
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
new file mode 100644
index 00000000000..75c8390cb82
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
@@ -0,0 +1,421 @@
+/* arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_REGS_CLOCK_H
+#define __PLAT_REGS_CLOCK_H __FILE__
+
+#define S5PC1XX_CLKREG(x)		(S5PC1XX_VA_CLK + (x))
+
+#define S5PC1XX_APLL_LOCK		S5PC1XX_CLKREG(0x00)
+#define S5PC1XX_MPLL_LOCK		S5PC1XX_CLKREG(0x04)
+#define S5PC1XX_EPLL_LOCK		S5PC1XX_CLKREG(0x08)
+#define S5PC100_HPLL_LOCK		S5PC1XX_CLKREG(0x0C)
+
+#define S5PC1XX_APLL_CON		S5PC1XX_CLKREG(0x100)
+#define S5PC1XX_MPLL_CON		S5PC1XX_CLKREG(0x104)
+#define S5PC1XX_EPLL_CON		S5PC1XX_CLKREG(0x108)
+#define S5PC100_HPLL_CON		S5PC1XX_CLKREG(0x10C)
+
+#define S5PC1XX_CLK_SRC0		S5PC1XX_CLKREG(0x200)
+#define S5PC1XX_CLK_SRC1		S5PC1XX_CLKREG(0x204)
+#define S5PC1XX_CLK_SRC2		S5PC1XX_CLKREG(0x208)
+#define S5PC1XX_CLK_SRC3		S5PC1XX_CLKREG(0x20C)
+
+#define S5PC1XX_CLK_DIV0		S5PC1XX_CLKREG(0x300)
+#define S5PC1XX_CLK_DIV1		S5PC1XX_CLKREG(0x304)
+#define S5PC1XX_CLK_DIV2		S5PC1XX_CLKREG(0x308)
+#define S5PC1XX_CLK_DIV3		S5PC1XX_CLKREG(0x30C)
+#define S5PC1XX_CLK_DIV4		S5PC1XX_CLKREG(0x310)
+
+#define S5PC100_CLK_OUT			S5PC1XX_CLKREG(0x400)
+
+#define S5PC100_CLKGATE_D00		S5PC1XX_CLKREG(0x500)
+#define S5PC100_CLKGATE_D01		S5PC1XX_CLKREG(0x504)
+#define S5PC100_CLKGATE_D02		S5PC1XX_CLKREG(0x508)
+
+#define S5PC100_CLKGATE_D10		S5PC1XX_CLKREG(0x520)
+#define S5PC100_CLKGATE_D11		S5PC1XX_CLKREG(0x524)
+#define S5PC100_CLKGATE_D12		S5PC1XX_CLKREG(0x528)
+#define S5PC100_CLKGATE_D13		S5PC1XX_CLKREG(0x52C)
+#define S5PC100_CLKGATE_D14		S5PC1XX_CLKREG(0x530)
+#define S5PC100_CLKGATE_D15		S5PC1XX_CLKREG(0x534)
+
+#define S5PC100_CLKGATE_D20		S5PC1XX_CLKREG(0x540)
+
+#define S5PC100_SCLKGATE0		S5PC1XX_CLKREG(0x560)
+#define S5PC100_SCLKGATE1		S5PC1XX_CLKREG(0x564)
+
+#define S5PC100_OTHERS          S5PC1XX_CLKREG(0x8200)
+
+#define S5PC1XX_EPLL_EN     (1<<31)
+#define S5PC1XX_EPLL_MASK   0xffffffff
+#define S5PC1XX_EPLLVAL(_m, _p, _s)   ((_m) << 16 | ((_p) << 8) | ((_s)))
+
+/* CLKSRC0 */
+#define S5PC1XX_CLKSRC0_APLL_MASK		(0x1<<0)
+#define S5PC1XX_CLKSRC0_APLL_SHIFT		(0)
+#define S5PC1XX_CLKSRC0_MPLL_MASK		(0x1<<4)
+#define S5PC1XX_CLKSRC0_MPLL_SHIFT		(4)
+#define S5PC1XX_CLKSRC0_EPLL_MASK		(0x1<<8)
+#define S5PC1XX_CLKSRC0_EPLL_SHIFT		(8)
+#define S5PC100_CLKSRC0_HPLL_MASK		(0x1<<12)
+#define S5PC100_CLKSRC0_HPLL_SHIFT		(12)
+#define S5PC100_CLKSRC0_AMMUX_MASK		(0x1<<16)
+#define S5PC100_CLKSRC0_AMMUX_SHIFT		(16)
+#define S5PC100_CLKSRC0_HREF_MASK		(0x1<<20)
+#define S5PC100_CLKSRC0_HREF_SHIFT		(20)
+#define S5PC1XX_CLKSRC0_ONENAND_MASK	(0x1<<24)
+#define S5PC1XX_CLKSRC0_ONENAND_SHIFT	(24)
+
+
+/* CLKSRC1 */
+#define S5PC100_CLKSRC1_UART_MASK		(0x1<<0)
+#define S5PC100_CLKSRC1_UART_SHIFT		(0)
+#define S5PC100_CLKSRC1_SPI0_MASK		(0x3<<4)
+#define S5PC100_CLKSRC1_SPI0_SHIFT		(4)
+#define S5PC100_CLKSRC1_SPI1_MASK		(0x3<<8)
+#define S5PC100_CLKSRC1_SPI1_SHIFT		(8)
+#define S5PC100_CLKSRC1_SPI2_MASK		(0x3<<12)
+#define S5PC100_CLKSRC1_SPI2_SHIFT		(12)
+#define S5PC100_CLKSRC1_IRDA_MASK		(0x3<<16)
+#define S5PC100_CLKSRC1_IRDA_SHIFT		(16)
+#define S5PC100_CLKSRC1_UHOST_MASK		(0x3<<20)
+#define S5PC100_CLKSRC1_UHOST_SHIFT		(20)
+#define S5PC100_CLKSRC1_CLK48M_MASK		(0x1<<24)
+#define S5PC100_CLKSRC1_CLK48M_SHIFT	(24)
+
+/* CLKSRC2 */
+#define S5PC100_CLKSRC2_MMC0_MASK		(0x3<<0)
+#define S5PC100_CLKSRC2_MMC0_SHIFT		(0)
+#define S5PC100_CLKSRC2_MMC1_MASK		(0x3<<4)
+#define S5PC100_CLKSRC2_MMC1_SHIFT		(4)
+#define S5PC100_CLKSRC2_MMC2_MASK		(0x3<<8)
+#define S5PC100_CLKSRC2_MMC2_SHIFT		(8)
+#define S5PC100_CLKSRC2_LCD_MASK		(0x3<<12)
+#define S5PC100_CLKSRC2_LCD_SHIFT		(12)
+#define S5PC100_CLKSRC2_FIMC0_MASK		(0x3<<16)
+#define S5PC100_CLKSRC2_FIMC0_SHIFT		(16)
+#define S5PC100_CLKSRC2_FIMC1_MASK		(0x3<<20)
+#define S5PC100_CLKSRC2_FIMC1_SHIFT		(20)
+#define S5PC100_CLKSRC2_FIMC2_MASK		(0x3<<24)
+#define S5PC100_CLKSRC2_FIMC2_SHIFT		(24)
+#define S5PC100_CLKSRC2_MIXER_MASK		(0x3<<28)
+#define S5PC100_CLKSRC2_MIXER_SHIFT		(28)
+
+/* CLKSRC3 */
+#define S5PC100_CLKSRC3_PWI_MASK		(0x3<<0)
+#define S5PC100_CLKSRC3_PWI_SHIFT		(0)
+#define S5PC100_CLKSRC3_HCLKD2_MASK		(0x1<<4)
+#define S5PC100_CLKSRC3_HCLKD2_SHIFT	(4)
+#define S5PC100_CLKSRC3_I2SD2_MASK		(0x3<<8)
+#define S5PC100_CLKSRC3_I2SD2_SHIFT		(8)
+#define S5PC100_CLKSRC3_AUDIO0_MASK		(0x7<<12)
+#define S5PC100_CLKSRC3_AUDIO0_SHIFT	(12)
+#define S5PC100_CLKSRC3_AUDIO1_MASK		(0x7<<16)
+#define S5PC100_CLKSRC3_AUDIO1_SHIFT	(16)
+#define S5PC100_CLKSRC3_AUDIO2_MASK		(0x7<<20)
+#define S5PC100_CLKSRC3_AUDIO2_SHIFT	(20)
+#define S5PC100_CLKSRC3_SPDIF_MASK		(0x3<<24)
+#define S5PC100_CLKSRC3_SPDIF_SHIFT		(24)
+
+
+/* CLKDIV0 */
+#define S5PC1XX_CLKDIV0_APLL_MASK		(0x1<<0)
+#define S5PC1XX_CLKDIV0_APLL_SHIFT		(0)
+#define S5PC100_CLKDIV0_ARM_MASK		(0x7<<4)
+#define S5PC100_CLKDIV0_ARM_SHIFT		(4)
+#define S5PC100_CLKDIV0_D0_MASK		(0x7<<8)
+#define S5PC100_CLKDIV0_D0_SHIFT		(8)
+#define S5PC100_CLKDIV0_PCLKD0_MASK		(0x7<<12)
+#define S5PC100_CLKDIV0_PCLKD0_SHIFT	(12)
+#define S5PC100_CLKDIV0_SECSS_MASK		(0x7<<16)
+#define S5PC100_CLKDIV0_SECSS_SHIFT		(16)
+
+/* CLKDIV1 */
+#define S5PC100_CLKDIV1_AM_MASK		(0x7<<0)
+#define S5PC100_CLKDIV1_AM_SHIFT		(0)
+#define S5PC100_CLKDIV1_MPLL_MASK		(0x3<<4)
+#define S5PC100_CLKDIV1_MPLL_SHIFT		(4)
+#define S5PC100_CLKDIV1_MPLL2_MASK		(0x1<<8)
+#define S5PC100_CLKDIV1_MPLL2_SHIFT		(8)
+#define S5PC100_CLKDIV1_D1_MASK		(0x7<<12)
+#define S5PC100_CLKDIV1_D1_SHIFT		(12)
+#define S5PC100_CLKDIV1_PCLKD1_MASK		(0x7<<16)
+#define S5PC100_CLKDIV1_PCLKD1_SHIFT	(16)
+#define S5PC100_CLKDIV1_ONENAND_MASK	(0x3<<20)
+#define S5PC100_CLKDIV1_ONENAND_SHIFT	(20)
+#define S5PC100_CLKDIV1_CAM_MASK		(0x1F<<24)
+#define S5PC100_CLKDIV1_CAM_SHIFT		(24)
+
+/* CLKDIV2 */
+#define S5PC100_CLKDIV2_UART_MASK		(0x7<<0)
+#define S5PC100_CLKDIV2_UART_SHIFT		(0)
+#define S5PC100_CLKDIV2_SPI0_MASK		(0xf<<4)
+#define S5PC100_CLKDIV2_SPI0_SHIFT		(4)
+#define S5PC100_CLKDIV2_SPI1_MASK		(0xf<<8)
+#define S5PC100_CLKDIV2_SPI1_SHIFT		(8)
+#define S5PC100_CLKDIV2_SPI2_MASK		(0xf<<12)
+#define S5PC100_CLKDIV2_SPI2_SHIFT		(12)
+#define S5PC100_CLKDIV2_IRDA_MASK		(0xf<<16)
+#define S5PC100_CLKDIV2_IRDA_SHIFT		(16)
+#define S5PC100_CLKDIV2_UHOST_MASK		(0xf<<20)
+#define S5PC100_CLKDIV2_UHOST_SHIFT		(20)
+
+/* CLKDIV3 */
+#define S5PC100_CLKDIV3_MMC0_MASK		(0xf<<0)
+#define S5PC100_CLKDIV3_MMC0_SHIFT		(0)
+#define S5PC100_CLKDIV3_MMC1_MASK		(0xf<<4)
+#define S5PC100_CLKDIV3_MMC1_SHIFT		(4)
+#define S5PC100_CLKDIV3_MMC2_MASK		(0xf<<8)
+#define S5PC100_CLKDIV3_MMC2_SHIFT		(8)
+#define S5PC100_CLKDIV3_LCD_MASK		(0xf<<12)
+#define S5PC100_CLKDIV3_LCD_SHIFT		(12)
+#define S5PC100_CLKDIV3_FIMC0_MASK		(0xf<<16)
+#define S5PC100_CLKDIV3_FIMC0_SHIFT		(16)
+#define S5PC100_CLKDIV3_FIMC1_MASK		(0xf<<20)
+#define S5PC100_CLKDIV3_FIMC1_SHIFT		(20)
+#define S5PC100_CLKDIV3_FIMC2_MASK		(0xf<<24)
+#define S5PC100_CLKDIV3_FIMC2_SHIFT		(24)
+#define S5PC100_CLKDIV3_HDMI_MASK		(0xf<<28)
+#define S5PC100_CLKDIV3_HDMI_SHIFT		(28)
+
+/* CLKDIV4 */
+#define S5PC100_CLKDIV4_PWI_MASK		(0x7<<0)
+#define S5PC100_CLKDIV4_PWI_SHIFT		(0)
+#define S5PC100_CLKDIV4_HCLKD2_MASK		(0x7<<4)
+#define S5PC100_CLKDIV4_HCLKD2_SHIFT	(4)
+#define S5PC100_CLKDIV4_I2SD2_MASK		(0xf<<8)
+#define S5PC100_CLKDIV4_I2SD2_SHIFT		(8)
+#define S5PC100_CLKDIV4_AUDIO0_MASK		(0xf<<12)
+#define S5PC100_CLKDIV4_AUDIO0_SHIFT	(12)
+#define S5PC100_CLKDIV4_AUDIO1_MASK		(0xf<<16)
+#define S5PC100_CLKDIV4_AUDIO1_SHIFT	(16)
+#define S5PC100_CLKDIV4_AUDIO2_MASK		(0xf<<20)
+#define S5PC100_CLKDIV4_AUDIO2_SHIFT	(20)
+
+
+/* HCLKD0/PCLKD0 Clock Gate 0 Registers */
+#define S5PC100_CLKGATE_D00_INTC		(1<<0)
+#define S5PC100_CLKGATE_D00_TZIC		(1<<1)
+#define S5PC100_CLKGATE_D00_CFCON		(1<<2)
+#define S5PC100_CLKGATE_D00_MDMA		(1<<3)
+#define S5PC100_CLKGATE_D00_G2D		(1<<4)
+#define S5PC100_CLKGATE_D00_SECSS		(1<<5)
+#define S5PC100_CLKGATE_D00_CSSYS		(1<<6)
+
+/* HCLKD0/PCLKD0 Clock Gate 1 Registers */
+#define S5PC100_CLKGATE_D01_DMC		(1<<0)
+#define S5PC100_CLKGATE_D01_SROMC		(1<<1)
+#define S5PC100_CLKGATE_D01_ONENAND		(1<<2)
+#define S5PC100_CLKGATE_D01_NFCON		(1<<3)
+#define S5PC100_CLKGATE_D01_INTMEM		(1<<4)
+#define S5PC100_CLKGATE_D01_EBI		(1<<5)
+
+/* PCLKD0 Clock Gate 2 Registers */
+#define S5PC100_CLKGATE_D02_SECKEY		(1<<1)
+#define S5PC100_CLKGATE_D02_SDM		(1<<2)
+
+/* HCLKD1/PCLKD1 Clock Gate 0 Registers */
+#define S5PC100_CLKGATE_D10_PDMA0		(1<<0)
+#define S5PC100_CLKGATE_D10_PDMA1		(1<<1)
+#define S5PC100_CLKGATE_D10_USBHOST		(1<<2)
+#define S5PC100_CLKGATE_D10_USBOTG		(1<<3)
+#define S5PC100_CLKGATE_D10_MODEMIF		(1<<4)
+#define S5PC100_CLKGATE_D10_HSMMC0		(1<<5)
+#define S5PC100_CLKGATE_D10_HSMMC1		(1<<6)
+#define S5PC100_CLKGATE_D10_HSMMC2		(1<<7)
+
+/* HCLKD1/PCLKD1 Clock Gate 1 Registers */
+#define S5PC100_CLKGATE_D11_LCD		(1<<0)
+#define S5PC100_CLKGATE_D11_ROTATOR		(1<<1)
+#define S5PC100_CLKGATE_D11_FIMC0		(1<<2)
+#define S5PC100_CLKGATE_D11_FIMC1		(1<<3)
+#define S5PC100_CLKGATE_D11_FIMC2		(1<<4)
+#define S5PC100_CLKGATE_D11_JPEG		(1<<5)
+#define S5PC100_CLKGATE_D11_DSI		(1<<6)
+#define S5PC100_CLKGATE_D11_CSI		(1<<7)
+#define S5PC100_CLKGATE_D11_G3D		(1<<8)
+
+/* HCLKD1/PCLKD1 Clock Gate 2 Registers */
+#define S5PC100_CLKGATE_D12_TV		(1<<0)
+#define S5PC100_CLKGATE_D12_VP		(1<<1)
+#define S5PC100_CLKGATE_D12_MIXER		(1<<2)
+#define S5PC100_CLKGATE_D12_HDMI		(1<<3)
+#define S5PC100_CLKGATE_D12_MFC		(1<<4)
+
+/* HCLKD1/PCLKD1 Clock Gate 3 Registers */
+#define S5PC100_CLKGATE_D13_CHIPID		(1<<0)
+#define S5PC100_CLKGATE_D13_GPIO		(1<<1)
+#define S5PC100_CLKGATE_D13_APC		(1<<2)
+#define S5PC100_CLKGATE_D13_IEC		(1<<3)
+#define S5PC100_CLKGATE_D13_PWM		(1<<6)
+#define S5PC100_CLKGATE_D13_SYSTIMER	(1<<7)
+#define S5PC100_CLKGATE_D13_WDT		(1<<8)
+#define S5PC100_CLKGATE_D13_RTC		(1<<9)
+
+/* HCLKD1/PCLKD1 Clock Gate 4 Registers */
+#define S5PC100_CLKGATE_D14_UART0		(1<<0)
+#define S5PC100_CLKGATE_D14_UART1		(1<<1)
+#define S5PC100_CLKGATE_D14_UART2		(1<<2)
+#define S5PC100_CLKGATE_D14_UART3		(1<<3)
+#define S5PC100_CLKGATE_D14_IIC		(1<<4)
+#define S5PC100_CLKGATE_D14_HDMI_IIC	(1<<5)
+#define S5PC100_CLKGATE_D14_SPI0		(1<<6)
+#define S5PC100_CLKGATE_D14_SPI1		(1<<7)
+#define S5PC100_CLKGATE_D14_SPI2		(1<<8)
+#define S5PC100_CLKGATE_D14_IRDA		(1<<9)
+#define S5PC100_CLKGATE_D14_CCAN0		(1<<10)
+#define S5PC100_CLKGATE_D14_CCAN1		(1<<11)
+#define S5PC100_CLKGATE_D14_HSITX		(1<<12)
+#define S5PC100_CLKGATE_D14_HSIRX		(1<<13)
+
+/* HCLKD1/PCLKD1 Clock Gate 5 Registers */
+#define S5PC100_CLKGATE_D15_IIS0		(1<<0)
+#define S5PC100_CLKGATE_D15_IIS1		(1<<1)
+#define S5PC100_CLKGATE_D15_IIS2		(1<<2)
+#define S5PC100_CLKGATE_D15_AC97		(1<<3)
+#define S5PC100_CLKGATE_D15_PCM0		(1<<4)
+#define S5PC100_CLKGATE_D15_PCM1		(1<<5)
+#define S5PC100_CLKGATE_D15_SPDIF		(1<<6)
+#define S5PC100_CLKGATE_D15_TSADC		(1<<7)
+#define S5PC100_CLKGATE_D15_KEYIF		(1<<8)
+#define S5PC100_CLKGATE_D15_CG		(1<<9)
+
+/* HCLKD2 Clock Gate 0 Registers */
+#define S5PC100_CLKGATE_D20_HCLKD2		(1<<0)
+#define S5PC100_CLKGATE_D20_I2SD2		(1<<1)
+
+/* Special Clock Gate 0 Registers */
+#define	S5PC1XX_CLKGATE_SCLK0_HPM		(1<<0)
+#define	S5PC1XX_CLKGATE_SCLK0_PWI		(1<<1)
+#define	S5PC100_CLKGATE_SCLK0_ONENAND	(1<<2)
+#define	S5PC100_CLKGATE_SCLK0_UART		(1<<3)
+#define	S5PC100_CLKGATE_SCLK0_SPI0		(1<<4)
+#define	S5PC100_CLKGATE_SCLK0_SPI1		(1<<5)
+#define	S5PC100_CLKGATE_SCLK0_SPI2		(1<<6)
+#define	S5PC100_CLKGATE_SCLK0_SPI0_48	(1<<7)
+#define	S5PC100_CLKGATE_SCLK0_SPI1_48	(1<<8)
+#define	S5PC100_CLKGATE_SCLK0_SPI2_48	(1<<9)
+#define	S5PC100_CLKGATE_SCLK0_IRDA		(1<<10)
+#define	S5PC100_CLKGATE_SCLK0_USBHOST	(1<<11)
+#define	S5PC100_CLKGATE_SCLK0_MMC0		(1<<12)
+#define	S5PC100_CLKGATE_SCLK0_MMC1		(1<<13)
+#define	S5PC100_CLKGATE_SCLK0_MMC2		(1<<14)
+#define	S5PC100_CLKGATE_SCLK0_MMC0_48	(1<<15)
+#define	S5PC100_CLKGATE_SCLK0_MMC1_48	(1<<16)
+#define	S5PC100_CLKGATE_SCLK0_MMC2_48	(1<<17)
+
+/* Special Clock Gate 1 Registers */
+#define	S5PC100_CLKGATE_SCLK1_LCD		(1<<0)
+#define	S5PC100_CLKGATE_SCLK1_FIMC0		(1<<1)
+#define	S5PC100_CLKGATE_SCLK1_FIMC1		(1<<2)
+#define	S5PC100_CLKGATE_SCLK1_FIMC2		(1<<3)
+#define	S5PC100_CLKGATE_SCLK1_TV54		(1<<4)
+#define	S5PC100_CLKGATE_SCLK1_VDAC54	(1<<5)
+#define	S5PC100_CLKGATE_SCLK1_MIXER		(1<<6)
+#define	S5PC100_CLKGATE_SCLK1_HDMI		(1<<7)
+#define	S5PC100_CLKGATE_SCLK1_AUDIO0	(1<<8)
+#define	S5PC100_CLKGATE_SCLK1_AUDIO1	(1<<9)
+#define	S5PC100_CLKGATE_SCLK1_AUDIO2	(1<<10)
+#define	S5PC100_CLKGATE_SCLK1_SPDIF		(1<<11)
+#define	S5PC100_CLKGATE_SCLK1_CAM		(1<<12)
+
+/* register for power management */
+#define S5PC100_PWR_CFG 		S5PC1XX_CLKREG(0x8000)
+#define S5PC100_EINT_WAKEUP_MASK 	S5PC1XX_CLKREG(0x8004)
+#define S5PC100_NORMAL_CFG 		S5PC1XX_CLKREG(0x8010)
+#define S5PC100_STOP_CFG 		S5PC1XX_CLKREG(0x8014)
+#define S5PC100_SLEEP_CFG 		S5PC1XX_CLKREG(0x8018)
+#define S5PC100_STOP_MEM_CFG 	S5PC1XX_CLKREG(0x801C)
+#define S5PC100_OSC_FREQ 		S5PC1XX_CLKREG(0x8100)
+#define S5PC100_OSC_STABLE 		S5PC1XX_CLKREG(0x8104)
+#define S5PC100_PWR_STABLE 		S5PC1XX_CLKREG(0x8108)
+#define S5PC100_MTC_STABLE 		S5PC1XX_CLKREG(0x8110)
+#define S5PC100_CLAMP_STABLE 	S5PC1XX_CLKREG(0x8114)
+#define S5PC100_OTHERS 		S5PC1XX_CLKREG(0x8200)
+#define S5PC100_RST_STAT 		S5PC1XX_CLKREG(0x8300)
+#define S5PC100_WAKEUP_STAT 	S5PC1XX_CLKREG(0x8304)
+#define S5PC100_BLK_PWR_STAT 	S5PC1XX_CLKREG(0x8308)
+#define S5PC100_INFORM0 		S5PC1XX_CLKREG(0x8400)
+#define S5PC100_INFORM1 		S5PC1XX_CLKREG(0x8404)
+#define S5PC100_INFORM2 		S5PC1XX_CLKREG(0x8408)
+#define S5PC100_INFORM3 		S5PC1XX_CLKREG(0x840C)
+#define S5PC100_INFORM4 		S5PC1XX_CLKREG(0x8410)
+#define S5PC100_INFORM5 		S5PC1XX_CLKREG(0x8414)
+#define S5PC100_INFORM6 		S5PC1XX_CLKREG(0x8418)
+#define S5PC100_INFORM7 		S5PC1XX_CLKREG(0x841C)
+#define S5PC100_DCGIDX_MAP0 	S5PC1XX_CLKREG(0x8500)
+#define S5PC100_DCGIDX_MAP1 	S5PC1XX_CLKREG(0x8504)
+#define S5PC100_DCGIDX_MAP2 	S5PC1XX_CLKREG(0x8508)
+#define S5PC100_DCGPERF_MAP0 	S5PC1XX_CLKREG(0x850C)
+#define S5PC100_DCGPERF_MAP1 	S5PC1XX_CLKREG(0x8510)
+#define S5PC100_DVCIDX_MAP 		S5PC1XX_CLKREG(0x8514)
+#define S5PC100_FREQ_CPU 		S5PC1XX_CLKREG(0x8518)
+#define S5PC100_FREQ_DPM 		S5PC1XX_CLKREG(0x851C)
+#define S5PC100_DVSEMCLK_EN 	S5PC1XX_CLKREG(0x8520)
+#define S5PC100_APLL_CON_L8 	S5PC1XX_CLKREG(0x8600)
+#define S5PC100_APLL_CON_L7 	S5PC1XX_CLKREG(0x8604)
+#define S5PC100_APLL_CON_L6 	S5PC1XX_CLKREG(0x8608)
+#define S5PC100_APLL_CON_L5 	S5PC1XX_CLKREG(0x860C)
+#define S5PC100_APLL_CON_L4 	S5PC1XX_CLKREG(0x8610)
+#define S5PC100_APLL_CON_L3 	S5PC1XX_CLKREG(0x8614)
+#define S5PC100_APLL_CON_L2 	S5PC1XX_CLKREG(0x8618)
+#define S5PC100_APLL_CON_L1 	S5PC1XX_CLKREG(0x861C)
+#define S5PC100_IEM_CONTROL 	S5PC1XX_CLKREG(0x8620)
+#define S5PC100_CLKDIV_IEM_L8 	S5PC1XX_CLKREG(0x8700)
+#define S5PC100_CLKDIV_IEM_L7 	S5PC1XX_CLKREG(0x8704)
+#define S5PC100_CLKDIV_IEM_L6 	S5PC1XX_CLKREG(0x8708)
+#define S5PC100_CLKDIV_IEM_L5 	S5PC1XX_CLKREG(0x870C)
+#define S5PC100_CLKDIV_IEM_L4 	S5PC1XX_CLKREG(0x8710)
+#define S5PC100_CLKDIV_IEM_L3 	S5PC1XX_CLKREG(0x8714)
+#define S5PC100_CLKDIV_IEM_L2 	S5PC1XX_CLKREG(0x8718)
+#define S5PC100_CLKDIV_IEM_L1 	S5PC1XX_CLKREG(0x871C)
+#define S5PC100_IEM_HPMCLK_DIV 	S5PC1XX_CLKREG(0x8724)
+
+#define S5PC100_SWRESET		S5PC1XX_CLKREG(0x100000)
+#define S5PC100_OND_SWRESET		S5PC1XX_CLKREG(0x100008)
+#define S5PC100_GEN_CTRL		S5PC1XX_CLKREG(0x100100)
+#define S5PC100_GEN_STATUS		S5PC1XX_CLKREG(0x100104)
+#define S5PC100_MEM_SYS_CFG		S5PC1XX_CLKREG(0x100200)
+#define S5PC100_CAM_MUX_SEL		S5PC1XX_CLKREG(0x100300)
+#define S5PC100_MIXER_OUT_SEL	S5PC1XX_CLKREG(0x100304)
+#define S5PC100_LPMP_MODE_SEL	S5PC1XX_CLKREG(0x100308)
+#define S5PC100_MIPI_PHY_CON0	S5PC1XX_CLKREG(0x100400)
+#define S5PC100_MIPI_PHY_CON1	S5PC1XX_CLKREG(0x100414)
+#define S5PC100_HDMI_PHY_CON0	S5PC1XX_CLKREG(0x100420)
+
+#define S5PC100_CFG_WFI_CLEAN	(~(3<<5))
+#define S5PC100_CFG_WFI_IDLE	(1<<5)
+#define S5PC100_CFG_WFI_STOP	(2<<5)
+#define S5PC100_CFG_WFI_SLEEP	(3<<5)
+
+#define S5PC100_OTHER_SYS_INT	24
+#define S5PC100_OTHER_STA_TYPE	23
+#define STA_TYPE_EXPON		0
+#define STA_TYPE_SFR		1
+
+#define S5PC100_PWR_STA_EXP_SCALE	0
+#define S5PC100_PWR_STA_CNT		4
+
+#define S5PC100_PWR_STABLE_COUNT	85500
+
+#define S5PC100_SLEEP_CFG_OSC_EN	0
+
+/* OTHERS Resgister */
+#define S5PC100_OTHERS_USB_SIG_MASK 	(1 << 16)
+#define S5PC100_OTHERS_MIPI_DPHY_EN		(1 << 28)
+
+/* MIPI D-PHY Control Register 0 */
+#define S5PC100_MIPI_PHY_CON0_M_RESETN	(1 << 1)
+#define S5PC100_MIPI_PHY_CON0_S_RESETN	(1 << 0)
+
+#endif /* _PLAT_REGS_CLOCK_H */
diff --git a/arch/arm/plat-s5pc1xx/s5pc100-clock.c b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
new file mode 100644
index 00000000000..6b24035172f
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
@@ -0,0 +1,1139 @@
+/* linux/arch/arm/plat-s5pc1xx/s5pc100-clock.c
+ *
+ * Copyright 2009 Samsung Electronics, Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 based common clock support
+ *
+ * Based on plat-s3c64xx/s3c6400-clock.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/cpu-freq.h>
+
+#include <plat/regs-clock.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/devs.h>
+#include <plat/s5pc100.h>
+
+/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
+ * ext_xtal_mux for want of an actual name from the manual.
+*/
+
+static struct clk clk_ext_xtal_mux = {
+	.name		= "ext_xtal",
+	.id		= -1,
+};
+
+#define clk_fin_apll clk_ext_xtal_mux
+#define clk_fin_mpll clk_ext_xtal_mux
+#define clk_fin_epll clk_ext_xtal_mux
+#define clk_fin_hpll clk_ext_xtal_mux
+
+#define clk_fout_mpll	clk_mpll
+
+struct clk_sources {
+	unsigned int	nr_sources;
+	struct clk	**sources;
+};
+
+struct clksrc_clk {
+	struct clk		clk;
+	unsigned int		mask;
+	unsigned int		shift;
+
+	struct clk_sources	*sources;
+
+	unsigned int		divider_shift;
+	void __iomem		*reg_divider;
+	void __iomem		*reg_source;
+};
+
+static int clk_default_setrate(struct clk *clk, unsigned long rate)
+{
+	clk->rate = rate;
+	return 1;
+}
+
+struct clk clk_27m = {
+	.name		= "clk_27m",
+	.id		= -1,
+	.rate		= 27000000,
+};
+
+static int clk_48m_ctrl(struct clk *clk, int enable)
+{
+	unsigned long flags;
+	u32 val;
+
+	/* can't rely on clock lock, this register has other usages */
+	local_irq_save(flags);
+
+	val = __raw_readl(S5PC1XX_CLK_SRC1);
+	if (enable)
+		val |= S5PC100_CLKSRC1_CLK48M_MASK;
+	else
+		val &= ~S5PC100_CLKSRC1_CLK48M_MASK;
+
+	__raw_writel(val, S5PC1XX_CLK_SRC1);
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+struct clk clk_48m = {
+	.name		= "clk_48m",
+	.id		= -1,
+	.rate		= 48000000,
+	.enable		= clk_48m_ctrl,
+};
+
+struct clk clk_54m = {
+	.name		= "clk_54m",
+	.id		= -1,
+	.rate		= 54000000,
+};
+
+struct clk clk_hpll = {
+	.name		= "hpll",
+	.id		= -1,
+};
+
+struct clk clk_hd0 = {
+	.name		= "hclkd0",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+	.set_rate	= clk_default_setrate,
+};
+
+struct clk clk_pd0 = {
+	.name		= "pclkd0",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+	.set_rate	= clk_default_setrate,
+};
+
+static int s5pc1xx_clk_gate(void __iomem *reg,
+				struct clk *clk,
+				int enable)
+{
+	unsigned int ctrlbit = clk->ctrlbit;
+	u32 con;
+
+	con = __raw_readl(reg);
+
+	if (enable)
+		con |= ctrlbit;
+	else
+		con &= ~ctrlbit;
+
+	__raw_writel(con, reg);
+	return 0;
+}
+
+static int s5pc1xx_clk_d00_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D00, clk, enable);
+}
+
+static int s5pc1xx_clk_d01_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D01, clk, enable);
+}
+
+static int s5pc1xx_clk_d02_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D02, clk, enable);
+}
+
+static int s5pc1xx_clk_d10_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D10, clk, enable);
+}
+
+static int s5pc1xx_clk_d11_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D11, clk, enable);
+}
+
+static int s5pc1xx_clk_d12_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D12, clk, enable);
+}
+
+static int s5pc1xx_clk_d13_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D13, clk, enable);
+}
+
+static int s5pc1xx_clk_d14_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D14, clk, enable);
+}
+
+static int s5pc1xx_clk_d15_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D15, clk, enable);
+}
+
+static int s5pc1xx_clk_d20_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D20, clk, enable);
+}
+
+int s5pc1xx_sclk0_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_SCLKGATE0, clk, enable);
+}
+
+int s5pc1xx_sclk1_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_SCLKGATE1, clk, enable);
+}
+
+static struct clk init_clocks_disable[] = {
+	{
+		.name		= "dsi",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_DSI,
+	}, {
+		.name		= "csi",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_CSI,
+	}, {
+		.name		= "ccan0",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_CCAN0,
+	}, {
+		.name		= "ccan1",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_CCAN1,
+	}, {
+		.name		= "keypad",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_KEYIF,
+	}, {
+		.name		= "hclkd2",
+		.id		= -1,
+		.parent		= NULL,
+		.enable		= s5pc1xx_clk_d20_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D20_HCLKD2,
+	}, {
+		.name		= "iis-d2",
+		.id		= -1,
+		.parent		= NULL,
+		.enable		= s5pc1xx_clk_d20_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D20_I2SD2,
+	}, {
+		.name		= "otg",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_USBOTG,
+	},
+};
+
+static struct clk init_clocks[] = {
+	/* System1 (D0_0) devices */
+	{
+		.name		= "intc",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_INTC,
+	}, {
+		.name		= "tzic",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_TZIC,
+	}, {
+		.name		= "cf-ata",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_CFCON,
+	}, {
+		.name		= "mdma",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_MDMA,
+	}, {
+		.name		= "g2d",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_G2D,
+	}, {
+		.name		= "secss",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_SECSS,
+	}, {
+		.name		= "cssys",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_CSSYS,
+	},
+
+	/* Memory (D0_1) devices */
+	{
+		.name		= "dmc",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_DMC,
+	}, {
+		.name		= "sromc",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_SROMC,
+	}, {
+		.name		= "onenand",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_ONENAND,
+	}, {
+		.name		= "nand",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_NFCON,
+	}, {
+		.name		= "intmem",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_INTMEM,
+	}, {
+		.name		= "ebi",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_EBI,
+	},
+
+	/* System2 (D0_2) devices */
+	{
+		.name		= "seckey",
+		.id		= -1,
+		.parent		= &clk_pd0,
+		.enable		= s5pc1xx_clk_d02_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D02_SECKEY,
+	}, {
+		.name		= "sdm",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d02_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D02_SDM,
+	},
+
+	/* File (D1_0) devices */
+	{
+		.name		= "pdma0",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_PDMA0,
+	}, {
+		.name		= "pdma1",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_PDMA1,
+	}, {
+		.name		= "usb-host",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_USBHOST,
+	}, {
+		.name		= "modem",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_MODEMIF,
+	}, {
+		.name		= "hsmmc",
+		.id		= 0,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC0,
+	}, {
+		.name		= "hsmmc",
+		.id		= 1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC1,
+	}, {
+		.name		= "hsmmc",
+		.id		= 2,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC2,
+	},
+
+	/* Multimedia1 (D1_1) devices */
+	{
+		.name		= "lcd",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_LCD,
+	}, {
+		.name		= "rotator",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_ROTATOR,
+	}, {
+		.name		= "fimc",
+		.id		= 0,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC0,
+	}, {
+		.name		= "fimc",
+		.id		= 1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC1,
+	}, {
+		.name		= "fimc",
+		.id		= 2,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC2,
+	}, {
+		.name		= "jpeg",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_JPEG,
+	}, {
+		.name		= "g3d",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_G3D,
+	},
+
+	/* Multimedia2 (D1_2) devices */
+	{
+		.name		= "tv",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d12_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D12_TV,
+	}, {
+		.name		= "vp",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d12_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D12_VP,
+	}, {
+		.name		= "mixer",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d12_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D12_MIXER,
+	}, {
+		.name		= "hdmi",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d12_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D12_HDMI,
+	}, {
+		.name		= "mfc",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d12_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D12_MFC,
+	},
+
+	/* System (D1_3) devices */
+	{
+		.name		= "chipid",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_CHIPID,
+	}, {
+		.name		= "gpio",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_GPIO,
+	}, {
+		.name		= "apc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_APC,
+	}, {
+		.name		= "iec",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_IEC,
+	}, {
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_PWM,
+	}, {
+		.name		= "systimer",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_SYSTIMER,
+	}, {
+		.name		= "watchdog",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_WDT,
+	}, {
+		.name		= "rtc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_RTC,
+	},
+
+	/* Connectivity (D1_4) devices */
+	{
+		.name		= "uart",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_UART0,
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_UART1,
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_UART2,
+	}, {
+		.name		= "uart",
+		.id		= 3,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_UART3,
+	}, {
+		.name		= "i2c",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_IIC,
+	}, {
+		.name		= "hdmi-i2c",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_HDMI_IIC,
+	}, {
+		.name		= "spi",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_SPI0,
+	}, {
+		.name		= "spi",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_SPI1,
+	}, {
+		.name		= "spi",
+		.id		= 2,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_SPI2,
+	}, {
+		.name		= "irda",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_IRDA,
+	}, {
+		.name		= "hsitx",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_HSITX,
+	}, {
+		.name		= "hsirx",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_HSIRX,
+	},
+
+	/* Audio (D1_5) devices */
+	{
+		.name		= "iis",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_IIS0,
+	}, {
+		.name		= "iis",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_IIS1,
+	}, {
+		.name		= "iis",
+		.id		= 2,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_IIS2,
+	}, {
+		.name		= "ac97",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_AC97,
+	}, {
+		.name		= "pcm",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_PCM0,
+	}, {
+		.name		= "pcm",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_PCM1,
+	}, {
+		.name		= "spdif",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_SPDIF,
+	}, {
+		.name		= "adc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_TSADC,
+	}, {
+		.name		= "keyif",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_KEYIF,
+	}, {
+		.name		= "cg",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_CG,
+	},
+
+	/* Audio (D2_0) devices: all disabled */
+
+	/* Special Clocks 1 */
+	{
+		.name		= "sclk_hpm",
+		.id		= -1,
+		.parent		= NULL,
+		.enable		= s5pc1xx_sclk0_ctrl,
+		.ctrlbit	= S5PC1XX_CLKGATE_SCLK0_HPM,
+	}, {
+		.name		= "sclk_onenand",
+		.id		= -1,
+		.parent		= NULL,
+		.enable		= s5pc1xx_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_ONENAND,
+	}, {
+		.name		= "sclk_spi_48",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s5pc1xx_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI0_48,
+	}, {
+		.name		= "sclk_spi_48",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s5pc1xx_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI1_48,
+	}, {
+		.name		= "sclk_spi_48",
+		.id		= 2,
+		.parent		= &clk_48m,
+		.enable		= s5pc1xx_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI2_48,
+	}, {
+		.name		= "sclk_mmc_48",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s5pc1xx_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC0_48,
+	}, {
+		.name		= "sclk_mmc_48",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s5pc1xx_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC1_48,
+	}, {
+		.name		= "sclk_mmc_48",
+		.id		= 2,
+		.parent		= &clk_48m,
+		.enable		= s5pc1xx_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC2_48,
+	},
+
+	/* Special Clocks 2 */
+	{
+		.name		= "sclk_tv_54",
+		.id		= -1,
+		.parent		= &clk_54m,
+		.enable		= s5pc1xx_sclk1_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK1_TV54,
+	}, {
+		.name		= "sclk_vdac_54",
+		.id		= -1,
+		.parent		= &clk_54m,
+		.enable		= s5pc1xx_sclk1_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK1_VDAC54,
+	}, {
+		.name		= "sclk_spdif",
+		.id		= -1,
+		.parent		= NULL,
+		.enable		= s5pc1xx_sclk1_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK1_SPDIF,
+	},
+};
+
+void __init s5pc1xx_register_clocks(void)
+{
+	struct clk *clkp;
+	int ret;
+	int ptr;
+
+	clkp = init_clocks;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+	}
+
+	clkp = init_clocks_disable;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+
+		(clkp->enable)(clkp, 0);
+	}
+
+	s3c_pwmclk_init();
+}
+static struct clk clk_fout_apll = {
+	.name		= "fout_apll",
+	.id		= -1,
+};
+
+static struct clk *clk_src_apll_list[] = {
+	[0] = &clk_fin_apll,
+	[1] = &clk_fout_apll,
+};
+
+static struct clk_sources clk_src_apll = {
+	.sources	= clk_src_apll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_apll_list),
+};
+
+static struct clksrc_clk clk_mout_apll = {
+	.clk	= {
+		.name		= "mout_apll",
+		.id		= -1,
+	},
+	.shift		= S5PC1XX_CLKSRC0_APLL_SHIFT,
+	.mask		= S5PC1XX_CLKSRC0_APLL_MASK,
+	.sources	= &clk_src_apll,
+	.reg_source	= S5PC1XX_CLK_SRC0,
+};
+
+static struct clk clk_fout_epll = {
+	.name		= "fout_epll",
+	.id		= -1,
+};
+
+static struct clk *clk_src_epll_list[] = {
+	[0] = &clk_fin_epll,
+	[1] = &clk_fout_epll,
+};
+
+static struct clk_sources clk_src_epll = {
+	.sources	= clk_src_epll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_epll_list),
+};
+
+static struct clksrc_clk clk_mout_epll = {
+	.clk	= {
+		.name		= "mout_epll",
+		.id		= -1,
+	},
+	.shift		= S5PC1XX_CLKSRC0_EPLL_SHIFT,
+	.mask		= S5PC1XX_CLKSRC0_EPLL_MASK,
+	.sources	= &clk_src_epll,
+	.reg_source	= S5PC1XX_CLK_SRC0,
+};
+
+static struct clk *clk_src_mpll_list[] = {
+	[0] = &clk_fin_mpll,
+	[1] = &clk_fout_mpll,
+};
+
+static struct clk_sources clk_src_mpll = {
+	.sources	= clk_src_mpll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+	.clk = {
+		.name		= "mout_mpll",
+		.id		= -1,
+	},
+	.shift		= S5PC1XX_CLKSRC0_MPLL_SHIFT,
+	.mask		= S5PC1XX_CLKSRC0_MPLL_MASK,
+	.sources	= &clk_src_mpll,
+	.reg_source	= S5PC1XX_CLK_SRC0,
+};
+
+static unsigned long s5pc1xx_clk_doutmpll_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned long clkdiv;
+
+	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+	clkdiv = __raw_readl(S5PC1XX_CLK_DIV1) & S5PC100_CLKDIV1_MPLL_MASK;
+	rate /= (clkdiv >> S5PC100_CLKDIV1_MPLL_SHIFT) + 1;
+
+	return rate;
+}
+
+static struct clk clk_dout_mpll = {
+	.name		= "dout_mpll",
+	.id		= -1,
+	.parent		= &clk_mout_mpll.clk,
+	.get_rate	= s5pc1xx_clk_doutmpll_get_rate,
+};
+
+static unsigned long s5pc1xx_clk_doutmpll2_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned long clkdiv;
+
+	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+	clkdiv = __raw_readl(S5PC1XX_CLK_DIV1) & S5PC100_CLKDIV1_MPLL2_MASK;
+	rate /= (clkdiv >> S5PC100_CLKDIV1_MPLL2_SHIFT) + 1;
+
+	return rate;
+}
+
+struct clk clk_dout_mpll2 = {
+	.name		= "dout_mpll2",
+	.id		= -1,
+	.parent		= &clk_mout_mpll.clk,
+	.get_rate	= s5pc1xx_clk_doutmpll2_get_rate,
+};
+
+static struct clk *clkset_uart_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	NULL,
+	NULL
+};
+
+static struct clk_sources clkset_uart = {
+	.sources	= clkset_uart_list,
+	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
+};
+
+static inline struct clksrc_clk *to_clksrc(struct clk *clk)
+{
+	return container_of(clk, struct clksrc_clk, clk);
+}
+
+static unsigned long s5pc1xx_getrate_clksrc(struct clk *clk)
+{
+	struct clksrc_clk *sclk = to_clksrc(clk);
+	unsigned long rate = clk_get_rate(clk->parent);
+	u32 clkdiv = __raw_readl(sclk->reg_divider);
+
+	clkdiv >>= sclk->divider_shift;
+	clkdiv &= 0xf;
+	clkdiv++;
+
+	rate /= clkdiv;
+	return rate;
+}
+
+static int s5pc1xx_setrate_clksrc(struct clk *clk, unsigned long rate)
+{
+	struct clksrc_clk *sclk = to_clksrc(clk);
+	void __iomem *reg = sclk->reg_divider;
+	unsigned int div;
+	u32 val;
+
+	rate = clk_round_rate(clk, rate);
+	div = clk_get_rate(clk->parent) / rate;
+	if (div > 16)
+		return -EINVAL;
+
+	val = __raw_readl(reg);
+	val &= ~(0xf << sclk->shift);
+	val |= (div - 1) << sclk->shift;
+	__raw_writel(val, reg);
+
+	return 0;
+}
+
+static int s5pc1xx_setparent_clksrc(struct clk *clk, struct clk *parent)
+{
+	struct clksrc_clk *sclk = to_clksrc(clk);
+	struct clk_sources *srcs = sclk->sources;
+	u32 clksrc = __raw_readl(sclk->reg_source);
+	int src_nr = -1;
+	int ptr;
+
+	for (ptr = 0; ptr < srcs->nr_sources; ptr++)
+		if (srcs->sources[ptr] == parent) {
+			src_nr = ptr;
+			break;
+		}
+
+	if (src_nr >= 0) {
+		clksrc &= ~sclk->mask;
+		clksrc |= src_nr << sclk->shift;
+
+		__raw_writel(clksrc, sclk->reg_source);
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static unsigned long s5pc1xx_roundrate_clksrc(struct clk *clk,
+					      unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	int div;
+
+	if (rate > parent_rate)
+		rate = parent_rate;
+	else {
+		div = rate / parent_rate;
+
+		if (div == 0)
+			div = 1;
+		if (div > 16)
+			div = 16;
+
+		rate = parent_rate / div;
+	}
+
+	return rate;
+}
+
+static struct clksrc_clk clk_uart_uclk1 = {
+	.clk	= {
+		.name		= "uclk1",
+		.id		= -1,
+		.ctrlbit        = S5PC100_CLKGATE_SCLK0_UART,
+		.enable		= s5pc1xx_sclk0_ctrl,
+		.set_parent	= s5pc1xx_setparent_clksrc,
+		.get_rate	= s5pc1xx_getrate_clksrc,
+		.set_rate	= s5pc1xx_setrate_clksrc,
+		.round_rate	= s5pc1xx_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC1_UART_SHIFT,
+	.mask		= S5PC100_CLKSRC1_UART_MASK,
+	.sources	= &clkset_uart,
+	.divider_shift	= S5PC100_CLKDIV2_UART_SHIFT,
+	.reg_divider	= S5PC1XX_CLK_DIV2,
+	.reg_source	= S5PC1XX_CLK_SRC1,
+};
+
+/* Clock initialisation code */
+
+static struct clksrc_clk *init_parents[] = {
+	&clk_mout_apll,
+	&clk_mout_epll,
+	&clk_mout_mpll,
+	&clk_uart_uclk1,
+};
+
+static void __init_or_cpufreq s5pc1xx_set_clksrc(struct clksrc_clk *clk)
+{
+	struct clk_sources *srcs = clk->sources;
+	u32 clksrc = __raw_readl(clk->reg_source);
+
+	clksrc &= clk->mask;
+	clksrc >>= clk->shift;
+
+	if (clksrc > srcs->nr_sources || !srcs->sources[clksrc]) {
+		printk(KERN_ERR "%s: bad source %d\n",
+		       clk->clk.name, clksrc);
+		return;
+	}
+
+	clk->clk.parent = srcs->sources[clksrc];
+
+	printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n",
+	       clk->clk.name, clk->clk.parent->name, clksrc,
+	       clk_get_rate(&clk->clk));
+}
+
+#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
+
+void __init_or_cpufreq s5pc100_setup_clocks(void)
+{
+	struct clk *xtal_clk;
+	unsigned long xtal;
+	unsigned long armclk;
+	unsigned long hclkd0;
+	unsigned long hclk;
+	unsigned long pclkd0;
+	unsigned long pclk;
+	unsigned long apll;
+	unsigned long mpll;
+	unsigned long hpll;
+	unsigned long epll;
+	unsigned int ptr;
+	u32 clkdiv0, clkdiv1;
+
+	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+	clkdiv0 = __raw_readl(S5PC1XX_CLK_DIV0);
+	clkdiv1 = __raw_readl(S5PC1XX_CLK_DIV1);
+
+	printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n",
+			__func__, clkdiv0, clkdiv1);
+
+	xtal_clk = clk_get(NULL, "xtal");
+	BUG_ON(IS_ERR(xtal_clk));
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+	apll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_APLL_CON));
+	mpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_MPLL_CON));
+	epll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_EPLL_CON));
+	hpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_HPLL_CON));
+
+	printk(KERN_INFO "S5PC100: PLL settings, A=%ld, M=%ld, E=%ld, H=%ld\n",
+	       apll, mpll, epll, hpll);
+
+	armclk = apll / GET_DIV(clkdiv0, S5PC1XX_CLKDIV0_APLL);
+	armclk = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_ARM);
+	hclkd0 = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_D0);
+	pclkd0 = hclkd0 / GET_DIV(clkdiv0, S5PC100_CLKDIV0_PCLKD0);
+	hclk = mpll / GET_DIV(clkdiv1, S5PC100_CLKDIV1_D1);
+	pclk = hclk / GET_DIV(clkdiv1, S5PC100_CLKDIV1_PCLKD1);
+
+	printk(KERN_INFO "S5PC100: ARMCLK=%ld, HCLKD0=%ld, PCLKD0=%ld, HCLK=%ld, PCLK=%ld\n",
+	       armclk, hclkd0, pclkd0, hclk, pclk);
+
+	clk_fout_apll.rate = apll;
+	clk_fout_mpll.rate = mpll;
+	clk_fout_epll.rate = epll;
+	clk_fout_apll.rate = apll;
+
+	clk_h.rate = hclk;
+	clk_p.rate = pclk;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
+		s5pc1xx_set_clksrc(init_parents[ptr]);
+}
+
+static struct clk *clks[] __initdata = {
+	&clk_ext_xtal_mux,
+	&clk_mout_epll.clk,
+	&clk_fout_epll,
+	&clk_mout_mpll.clk,
+	&clk_dout_mpll,
+	&clk_uart_uclk1.clk,
+	&clk_ext,
+	&clk_epll,
+	&clk_27m,
+	&clk_48m,
+	&clk_54m,
+};
+
+void __init s5pc100_register_clocks(void)
+{
+	struct clk *clkp;
+	int ret;
+	int ptr;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
+		clkp = clks[ptr];
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+	}
+
+	clk_mpll.parent = &clk_mout_mpll.clk;
+	clk_epll.parent = &clk_mout_epll.clk;
+}
-- 
cgit v1.2.3


From 5a7652f2032b88106c9ba41edf0fb795397008bd Mon Sep 17 00:00:00 2001
From: Byungho Min <bhminjames@gmail.com>
Date: Tue, 23 Jun 2009 21:39:42 +0900
Subject: ARM: S5PC100: Kconfigs and Makefiles

S5PC100 is a new SoC with ARM coretex-A8 and numerous peripherals. This SoC is
successor of S3C64XX. S5PC100 has peripherals which are still similar to S3C
families so some drivers in "arch/arm/plat-s3c" can be shared. S5PC100 specific
drivers will be added in "arch/arm/plat-s5pcxx" or "arch/arm/mach-s5pc100"

Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: tidy and edit description]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/Kconfig                              | 13 +++++++
 arch/arm/Makefile                             |  2 ++
 arch/arm/mach-s5pc100/Kconfig                 | 22 ++++++++++++
 arch/arm/mach-s5pc100/Makefile                | 17 +++++++++
 arch/arm/mach-s5pc100/Makefile.boot           |  2 ++
 arch/arm/mach-s5pc100/include/mach/hardware.h |  2 +-
 arch/arm/plat-s5pc1xx/Kconfig                 | 50 +++++++++++++++++++++++++++
 arch/arm/plat-s5pc1xx/Makefile                | 26 ++++++++++++++
 8 files changed, 133 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-s5pc100/Kconfig
 create mode 100644 arch/arm/mach-s5pc100/Makefile
 create mode 100644 arch/arm/mach-s5pc100/Makefile.boot
 create mode 100644 arch/arm/plat-s5pc1xx/Kconfig
 create mode 100644 arch/arm/plat-s5pc1xx/Makefile

(limited to 'arch/arm')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f07a4ba281b..be89ab3aacf 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -588,6 +588,14 @@ config ARCH_S3C64XX
 	help
 	  Samsung S3C64XX series based systems
 
+config ARCH_S5PC1XX
+	bool "Samsung S5PC1XX"
+	select GENERIC_GPIO
+	select HAVE_CLK
+	select CPU_V7
+	help
+	  Samsung S5PC1XX series based systems
+
 config ARCH_SHARK
 	bool "Shark"
 	select CPU_SA110
@@ -698,6 +706,7 @@ source "arch/arm/mach-kirkwood/Kconfig"
 source "arch/arm/plat-s3c24xx/Kconfig"
 source "arch/arm/plat-s3c64xx/Kconfig"
 source "arch/arm/plat-s3c/Kconfig"
+source "arch/arm/plat-s5pc1xx/Kconfig"
 
 if ARCH_S3C2410
 source "arch/arm/mach-s3c2400/Kconfig"
@@ -715,6 +724,10 @@ endif
 
 source "arch/arm/plat-stmp3xxx/Kconfig"
 
+if ARCH_S5PC1XX
+source "arch/arm/mach-s5pc100/Kconfig"
+endif
+
 source "arch/arm/mach-lh7a40x/Kconfig"
 
 source "arch/arm/mach-h720x/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c877d6df23d..96659415953 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -150,6 +150,7 @@ machine-$(CONFIG_ARCH_RPC)		:= rpc
 machine-$(CONFIG_ARCH_S3C2410)		:= s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
 machine-$(CONFIG_ARCH_S3C24A0)		:= s3c24a0
 machine-$(CONFIG_ARCH_S3C64XX)		:= s3c6400 s3c6410
+machine-$(CONFIG_ARCH_S5PC1XX)		:= s5pc100
 machine-$(CONFIG_ARCH_SA1100)		:= sa1100
 machine-$(CONFIG_ARCH_SHARK)		:= shark
 machine-$(CONFIG_ARCH_STMP378X)		:= stmp378x
@@ -168,6 +169,7 @@ plat-$(CONFIG_PLAT_ORION)	:= orion
 plat-$(CONFIG_PLAT_PXA)		:= pxa
 plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx s3c
 plat-$(CONFIG_PLAT_S3C64XX)	:= s3c64xx s3c
+plat-$(CONFIG_PLAT_S5PC1XX)	:= s5pc1xx s3c
 plat-$(CONFIG_ARCH_STMP3XXX)	:= stmp3xxx
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
new file mode 100644
index 00000000000..b1a4ba50441
--- /dev/null
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -0,0 +1,22 @@
+# arch/arm/mach-s5pc100/Kconfig
+#
+# Copyright 2009 Samsung Electronics Co.
+#	Byungho Min <bhmin@samsung.com>
+#
+# Licensed under GPLv2
+
+# Configuration options for the S5PC100 CPU
+
+config CPU_S5PC100
+	bool
+	select CPU_S5PC100_INIT
+	select CPU_S5PC100_CLOCK
+	help
+	  Enable S5PC100 CPU support
+
+config MACH_SMDKC100
+	bool "SMDKC100"
+	select CPU_S5PC100
+	select S5PC1XX_SETUP_I2C1
+	help
+	  Machine support for the Samsung SMDKC100
diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile
new file mode 100644
index 00000000000..afc89b381d7
--- /dev/null
+++ b/arch/arm/mach-s5pc100/Makefile
@@ -0,0 +1,17 @@
+# arch/arm/mach-s5pc100/Makefile
+#
+# Copyright 2009 Samsung Electronics Co.
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+# Core support for S5PC100 system
+
+obj-$(CONFIG_CPU_S5PC100)	+= cpu.o
+
+# machine support
+obj-$(CONFIG_MACH_SMDKC100)	+= mach-smdkc100.o
diff --git a/arch/arm/mach-s5pc100/Makefile.boot b/arch/arm/mach-s5pc100/Makefile.boot
new file mode 100644
index 00000000000..ff90aa13bd6
--- /dev/null
+++ b/arch/arm/mach-s5pc100/Makefile.boot
@@ -0,0 +1,2 @@
+   zreladdr-y	:= 0x20008000
+params_phys-y	:= 0x20000100
diff --git a/arch/arm/mach-s5pc100/include/mach/hardware.h b/arch/arm/mach-s5pc100/include/mach/hardware.h
index 38ce8206a1a..6b38618c2fd 100644
--- a/arch/arm/mach-s5pc100/include/mach/hardware.h
+++ b/arch/arm/mach-s5pc100/include/mach/hardware.h
@@ -3,7 +3,7 @@
  * Copyright 2009 Samsung Electronics Co.
  *      Byungho Min <bhmin@samsung.com>
  *
- * S3C6400 - Hardware support
+ * S5PC100 - Hardware support
  */
 
 #ifndef __ASM_ARCH_HARDWARE_H
diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig
new file mode 100644
index 00000000000..a8a711c3c06
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/Kconfig
@@ -0,0 +1,50 @@
+# arch/arm/plat-s5pc1xx/Kconfig
+#
+# Copyright 2009 Samsung Electronics Co.
+#	Byungho Min <bhmin@samsung.com>
+#
+# Licensed under GPLv2
+
+config PLAT_S5PC1XX
+	bool
+	depends on ARCH_S5PC1XX
+	default y
+	select PLAT_S3C
+	select ARM_VIC
+	select NO_IOPORT
+	select ARCH_REQUIRE_GPIOLIB
+	select S3C_GPIO_TRACK
+	select S3C_GPIO_PULL_UPDOWN
+	help
+	  Base platform code for any Samsung S5PC1XX device
+
+if PLAT_S5PC1XX
+
+# Configuration options shared by all S3C64XX implementations
+
+config CPU_S5PC100_INIT
+	bool
+	help
+	  Common initialisation code for the S5PC1XX
+
+config CPU_S5PC100_CLOCK
+	bool
+	help
+	  Common clock support code for the S5PC1XX
+
+# platform specific device setup
+
+config S5PC100_SETUP_I2C0
+	bool
+	default y
+	help
+	  Common setup code for i2c bus 0.
+
+	  Note, currently since i2c0 is always compiled, this setup helper
+	  is always compiled with it.
+
+config S5PC100_SETUP_I2C1
+	bool
+	help
+	  Common setup code for i2c bus 1.
+endif
diff --git a/arch/arm/plat-s5pc1xx/Makefile b/arch/arm/plat-s5pc1xx/Makefile
new file mode 100644
index 00000000000..f1ecb2c37ee
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/Makefile
@@ -0,0 +1,26 @@
+# arch/arm/plat-s5pc1xx/Makefile
+#
+# Copyright 2009 Samsung Electronics Co.
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:= dummy.o
+obj-				:=
+
+# Core files
+
+obj-y				+= dev-uart.o
+obj-y				+= cpu.o
+obj-y				+= irq.o
+
+# CPU support
+
+obj-$(CONFIG_CPU_S5PC100_INIT)	+= s5pc100-init.o
+obj-$(CONFIG_CPU_S5PC100_CLOCK)	+= s5pc100-clock.o
+
+# Device setup
+
+obj-$(CONFIG_S5PC100_SETUP_I2C0) += setup-i2c0.o
+obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o
-- 
cgit v1.2.3


From e119766f4e15274e2cd9bb5f25119c8b008d920b Mon Sep 17 00:00:00 2001
From: Byungho Min <bhminjames@gmail.com>
Date: Tue, 23 Jun 2009 21:40:28 +0900
Subject: ARM: S5PC100: Board and configuration file

SMDKC100 board support.
The board can be obtained from meritech (http://www.meritech.co.kr)

Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: fixup subject and description]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/configs/s5pc100_defconfig    | 892 ++++++++++++++++++++++++++++++++++
 arch/arm/mach-s5pc100/mach-smdkc100.c | 103 ++++
 2 files changed, 995 insertions(+)
 create mode 100644 arch/arm/configs/s5pc100_defconfig
 create mode 100644 arch/arm/mach-s5pc100/mach-smdkc100.c

(limited to 'arch/arm')

diff --git a/arch/arm/configs/s5pc100_defconfig b/arch/arm/configs/s5pc100_defconfig
new file mode 100644
index 00000000000..b0d7d3d3a5e
--- /dev/null
+++ b/arch/arm/configs/s5pc100_defconfig
@@ -0,0 +1,892 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30
+# Wed Jul  1 15:53:07 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_MMU=y
+CONFIG_NO_IOPORT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+CONFIG_ARCH_S5PC1XX=y
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+CONFIG_PLAT_S3C=y
+
+#
+# Boot options
+#
+# CONFIG_S3C_BOOT_ERROR_RESET is not set
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
+
+#
+# Power management
+#
+CONFIG_S3C_LOWLEVEL_UART_PORT=0
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_GPIO_TRACK=y
+CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_PLAT_S5PC1XX=y
+CONFIG_CPU_S5PC100_INIT=y
+CONFIG_CPU_S5PC100_CLOCK=y
+CONFIG_S5PC100_SETUP_I2C0=y
+CONFIG_CPU_S5PC100=y
+CONFIG_MACH_SMDKC100=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=cramfs init=/linuxrc console=ttySAC2,115200 mem=128M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS=3
+# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_MMC=y
+CONFIG_MMC_DEBUG=y
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=y
+# CONFIG_MMC_SDHCI_PLTFM is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+CONFIG_DEBUG_S3C_PORT=y
+CONFIG_DEBUG_S3C_UART=0
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
new file mode 100644
index 00000000000..214093cd763
--- /dev/null
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -0,0 +1,103 @@
+/* linux/arch/arm/mach-s5pc100/mach-smdkc100.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Author: Byungho Min <bhmin@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/s5pc100.h>
+
+#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[3] = {
+		.hwport	     = 3,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+};
+
+static struct map_desc smdkc100_iodesc[] = {};
+
+static struct platform_device *smdkc100_devices[] __initdata = {
+};
+
+static void __init smdkc100_map_io(void)
+{
+	s5pc1xx_init_io(smdkc100_iodesc, ARRAY_SIZE(smdkc100_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs));
+}
+
+static void __init smdkc100_machine_init(void)
+{
+	platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices));
+}
+
+MACHINE_START(SMDKC100, "SMDKC100")
+	/* Maintainer: Byungho Min <bhmin@samsung.com> */
+	.phys_io	= S5PC1XX_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S5PC1XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S5PC100_PA_SDRAM + 0x100,
+
+	.init_irq	= s5pc100_init_irq,
+	.map_io		= smdkc100_map_io,
+	.init_machine	= smdkc100_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
-- 
cgit v1.2.3


From db616eb67604242c11bfbb331bb143bfe4a2e386 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Sun, 16 Aug 2009 23:54:58 +0100
Subject: ARM: S3C: Add S3C_DEV_NAND Kconfig entry

Currently the S5PC100 does not define S3C_PA_NAND, leaving the NAND device
definitions in arch/arm/plat-s3c/dev-nand.c unbuildable. Add a KConfig
entry to select whether this is built.

As backwards compatibility, both the S3C24XX and S3C64XX define the new
configuration in their main Kconfig files until better support for basing
this selection on a per-machine basis can be sorted out.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/Kconfig     | 5 +++++
 arch/arm/plat-s3c/Makefile    | 2 +-
 arch/arm/plat-s3c24xx/Kconfig | 1 +
 arch/arm/plat-s3c64xx/Kconfig | 1 +
 4 files changed, 8 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig
index 935c7558469..8931c5f0e46 100644
--- a/arch/arm/plat-s3c/Kconfig
+++ b/arch/arm/plat-s3c/Kconfig
@@ -198,4 +198,9 @@ config S3C_DEV_USB_HSOTG
 	help
 	  Compile in platform device definition for USB high-speed OtG
 
+config S3C_DEV_NAND
+	bool
+	help
+	  Compile in platform device definition for NAND controller
+
 endif
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index f32d045e7e3..3c09109e9e8 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -41,4 +41,4 @@ obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
 obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
 obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
 obj-$(CONFIG_S3C_DEV_USB_HSOTG)	+= dev-usb-hsotg.o
-obj-y				+= dev-nand.o
+obj-$(CONFIG_S3C_DEV_NAND)	+= dev-nand.o
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 2f914568359..9c7aca48964 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -10,6 +10,7 @@ config PLAT_S3C24XX
 	default y
 	select NO_IOPORT
 	select ARCH_REQUIRE_GPIOLIB
+	select S3C_DEVICE_NAND
 	help
 	  Base platform code for any Samsung S3C24XX device
 
diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig
index 5ebd8b425a5..bcfa778614d 100644
--- a/arch/arm/plat-s3c64xx/Kconfig
+++ b/arch/arm/plat-s3c64xx/Kconfig
@@ -19,6 +19,7 @@ config PLAT_S3C64XX
 	select S3C_GPIO_PULL_UPDOWN
 	select S3C_GPIO_CFG_S3C24XX
 	select S3C_GPIO_CFG_S3C64XX
+	select S3C_DEV_NAND
 	select USB_ARCH_HAS_OHCI
 	help
 	  Base platform code for any Samsung S3C64XX device
-- 
cgit v1.2.3


From baa28e3530375e0bef2c53243634a1c78f5c02f3 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Mon, 3 Aug 2009 15:11:29 +0100
Subject: ARM: Show FIQ in /proc/interrupts on CONFIG_FIQ

The show_fiq_list() call in arch/arm/kernel/irq.c currently depends on
CONFIG_ARCH_ACORN, but this is not the only architecture that supports
the usage of FIQ. Change to calling this if CONFIG_FIQ is set (which
is what arch/arm/kernel/fiq.c is built by).

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/kernel/irq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index b7c3490eaa2..c9a8619f385 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -86,7 +86,7 @@ int show_interrupts(struct seq_file *p, void *v)
 unlock:
 		spin_unlock_irqrestore(&irq_desc[i].lock, flags);
 	} else if (i == NR_IRQS) {
-#ifdef CONFIG_ARCH_ACORN
+#ifdef CONFIG_FIQ
 		show_fiq_list(p, v);
 #endif
 #ifdef CONFIG_SMP
-- 
cgit v1.2.3


From 65cec8e3db606608fd1f8dfc4a1c7c37bfba9173 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Mon, 17 Aug 2009 20:02:06 +0100
Subject: ARM: implement highpte

Add the ARM implementation of highpte, which allows PTE tables to be
placed in highmem.  Unfortunately, we do not offer highpte support
when support for L2 cache is enabled.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig               |  5 +++++
 arch/arm/include/asm/pgalloc.h | 16 ++++++++++++----
 arch/arm/include/asm/pgtable.h | 17 +++++++++++++----
 arch/arm/mm/fault.c            |  1 +
 4 files changed, 31 insertions(+), 8 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aef63c8e3d2..370f4778712 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1054,6 +1054,11 @@ config HIGHMEM
 
 	  If unsure, say n.
 
+config HIGHPTE
+	bool "Allocate 2nd-level pagetables from highmem"
+	depends on HIGHMEM
+	depends on !OUTER_CACHE
+
 source "mm/Kconfig"
 
 config LEDS
diff --git a/arch/arm/include/asm/pgalloc.h b/arch/arm/include/asm/pgalloc.h
index 3dcd64bf182..b12cc98bbe0 100644
--- a/arch/arm/include/asm/pgalloc.h
+++ b/arch/arm/include/asm/pgalloc.h
@@ -36,6 +36,8 @@ extern void free_pgd_slow(struct mm_struct *mm, pgd_t *pgd);
 #define pgd_alloc(mm)			get_pgd_slow(mm)
 #define pgd_free(mm, pgd)		free_pgd_slow(mm, pgd)
 
+#define PGALLOC_GFP	(GFP_KERNEL | __GFP_NOTRACK | __GFP_REPEAT | __GFP_ZERO)
+
 /*
  * Allocate one PTE table.
  *
@@ -57,7 +59,7 @@ pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr)
 {
 	pte_t *pte;
 
-	pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+	pte = (pte_t *)__get_free_page(PGALLOC_GFP);
 	if (pte) {
 		clean_dcache_area(pte, sizeof(pte_t) * PTRS_PER_PTE);
 		pte += PTRS_PER_PTE;
@@ -71,10 +73,16 @@ pte_alloc_one(struct mm_struct *mm, unsigned long addr)
 {
 	struct page *pte;
 
-	pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0);
+#ifdef CONFIG_HIGHPTE
+	pte = alloc_pages(PGALLOC_GFP | __GFP_HIGHMEM, 0);
+#else
+	pte = alloc_pages(PGALLOC_GFP, 0);
+#endif
 	if (pte) {
-		void *page = page_address(pte);
-		clean_dcache_area(page, sizeof(pte_t) * PTRS_PER_PTE);
+		if (!PageHighMem(pte)) {
+			void *page = page_address(pte);
+			clean_dcache_area(page, sizeof(pte_t) * PTRS_PER_PTE);
+		}
 		pgtable_page_ctor(pte);
 	}
 
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 9655bce3d34..201ccaa11f6 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -262,10 +262,19 @@ extern struct page *empty_zero_page;
 #define pte_clear(mm,addr,ptep)	set_pte_ext(ptep, __pte(0), 0)
 #define pte_page(pte)		(pfn_to_page(pte_pfn(pte)))
 #define pte_offset_kernel(dir,addr)	(pmd_page_vaddr(*(dir)) + __pte_index(addr))
-#define pte_offset_map(dir,addr)	(pmd_page_vaddr(*(dir)) + __pte_index(addr))
-#define pte_offset_map_nested(dir,addr)	(pmd_page_vaddr(*(dir)) + __pte_index(addr))
-#define pte_unmap(pte)		do { } while (0)
-#define pte_unmap_nested(pte)	do { } while (0)
+
+#define pte_offset_map(dir,addr)	(__pte_map(dir, KM_PTE0) + __pte_index(addr))
+#define pte_offset_map_nested(dir,addr)	(__pte_map(dir, KM_PTE1) + __pte_index(addr))
+#define pte_unmap(pte)			__pte_unmap(pte, KM_PTE0)
+#define pte_unmap_nested(pte)		__pte_unmap(pte, KM_PTE1)
+
+#ifndef CONFIG_HIGHPTE
+#define __pte_map(dir,km)	pmd_page_vaddr(*(dir))
+#define __pte_unmap(pte,km)	do { } while (0)
+#else
+#define __pte_map(dir,km)	((pte_t *)kmap_atomic(pmd_page(*(dir)), km) + PTRS_PER_PTE)
+#define __pte_unmap(pte,km)	kunmap_atomic((pte - PTRS_PER_PTE), km)
+#endif
 
 #define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext)
 
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 6fdcbb70982..5fa8dea5a37 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -16,6 +16,7 @@
 #include <linux/kprobes.h>
 #include <linux/uaccess.h>
 #include <linux/page-flags.h>
+#include <linux/highmem.h>
 
 #include <asm/system.h>
 #include <asm/pgtable.h>
-- 
cgit v1.2.3


From 0914b93f4f36d1a0233bd64da9a35e37e72304ec Mon Sep 17 00:00:00 2001
From: Joonyoung Shim <jy0922.shim@samsung.com>
Date: Tue, 18 Aug 2009 21:56:19 +0900
Subject: ASoC: Fix data format configuration for S3C64XX IISv2

The data format configuration for S3C64xx IISv2 was hardcoded for IISMOD
register. This patch changes to the defined values it.

And instead of bits 9 and 10 of IISMOD we should clear bits 13 and 14.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h b/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
index 0fad7571030..07659dad174 100644
--- a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
+++ b/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
@@ -33,6 +33,11 @@
 #define S3C2412_IISCON_RXDMA_ACTIVE	(1 << 1)
 #define S3C2412_IISCON_IIS_ACTIVE	(1 << 0)
 
+#define S3C64XX_IISMOD_BLC_16BIT	(0 << 13)
+#define S3C64XX_IISMOD_BLC_8BIT		(1 << 13)
+#define S3C64XX_IISMOD_BLC_24BIT	(2 << 13)
+#define S3C64XX_IISMOD_BLC_MASK		(3 << 13)
+
 #define S3C64XX_IISMOD_IMS_PCLK		(0 << 10)
 #define S3C64XX_IISMOD_IMS_SYSMUX	(1 << 10)
 
-- 
cgit v1.2.3


From 9e2a7e6f5f1091965c78e01e87af05607bbf937f Mon Sep 17 00:00:00 2001
From: Dan Williams <dan.j.williams@intel.com>
Date: Tue, 18 Aug 2009 13:47:30 -0700
Subject: iop33x: update defconfig (default atu to on)

By default the iop3xx configurations are set to boot the platforms over
an nfs root configuration.  Since commit c34002c1 "iop: unconditionally
initialize the ATU on platforms known to be 'hosts'" this configuration
also requires iop3xx_init_atu=y to be specified on the kernel command
line.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 arch/arm/configs/iop33x_defconfig | 554 +++++++++++++++++++++++++++++---------
 1 file changed, 429 insertions(+), 125 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/configs/iop33x_defconfig b/arch/arm/configs/iop33x_defconfig
index eec48829826..ed2d59d0182 100644
--- a/arch/arm/configs/iop33x_defconfig
+++ b/arch/arm/configs/iop33x_defconfig
@@ -1,29 +1,26 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc5
-# Wed Dec 12 16:11:27 2007
+# Linux kernel version: 2.6.31-rc6
+# Tue Aug 18 13:41:41 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_GENERIC_GPIO=y
 CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -40,21 +37,39 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_CLASSIC_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
@@ -67,29 +82,48 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -103,6 +137,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
 
 #
 # System Type
@@ -112,15 +147,15 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 CONFIG_ARCH_IOP33X=y
@@ -128,19 +163,26 @@ CONFIG_ARCH_IOP33X=y
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-CONFIG_IOP3XX_ATU=y
 
 #
 # IOP33x Implementation Options
@@ -151,14 +193,6 @@ CONFIG_IOP3XX_ATU=y
 #
 CONFIG_ARCH_IQ80331=y
 CONFIG_MACH_IQ80332=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
 CONFIG_PLAT_IOP=y
 
 #
@@ -168,6 +202,7 @@ CONFIG_CPU_32=y
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
 CONFIG_CPU_CP15=y
@@ -178,7 +213,6 @@ CONFIG_CPU_CP15_MMU=y
 #
 # CONFIG_ARM_THUMB is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
 # CONFIG_IWMMXT is not set
 CONFIG_XSCALE_PMU=y
 
@@ -190,40 +224,54 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 
 #
 # Kernel Features
 #
-# CONFIG_TICK_ONESHOT is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp cachepolicy=writealloc"
+CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp cachepolicy=writealloc iop3xx_init_atu=y"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
 #
 # Floating point emulation
 #
@@ -239,6 +287,8 @@ CONFIG_FPE_NWFPE=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_ARTHUR is not set
@@ -247,11 +297,7 @@ CONFIG_BINFMT_AOUT=y
 # Power management options
 #
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
 #
@@ -264,6 +310,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -310,6 +357,7 @@ CONFIG_IPV6=y
 # CONFIG_IPV6_SIT is not set
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -317,6 +365,7 @@ CONFIG_IPV6=y
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -326,24 +375,31 @@ CONFIG_IPV6=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 
 #
-# Wireless
+# CFG80211 needs to be enabled for MAC80211
 #
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -357,7 +413,9 @@ CONFIG_IPV6=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -366,12 +424,14 @@ CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 CONFIG_MTD_REDBOOT_PARTS_READONLY=y
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -421,9 +481,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
@@ -446,6 +504,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1
 # CONFIG_MTD_NAND is not set
 # CONFIG_MTD_ONENAND is not set
 
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
 #
 # UBI - Unsorted block images
 #
@@ -463,14 +526,29 @@ CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -492,10 +570,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -512,6 +586,8 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -520,13 +596,18 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -543,15 +624,18 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=y
-# CONFIG_MD_RAID5_RESHAPE is not set
+CONFIG_MD_RAID6_PQ=y
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=y
@@ -568,27 +652,34 @@ CONFIG_BLK_DEV_DM=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 # CONFIG_NET_ETHERNET is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -596,23 +687,34 @@ CONFIG_E1000_NAPI=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -620,13 +722,16 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -670,10 +775,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -692,11 +800,12 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -705,16 +814,14 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
-# I2C Algorithms
+# I2C Hardware Bus support
 #
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
 
 #
-# I2C Hardware Bus support
+# PC SMBus host controller drivers
 #
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
@@ -722,50 +829,82 @@ CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_IOP3XX=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IOP3XX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
 
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# SPI support
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -773,13 +912,17 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -794,16 +937,23 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -812,28 +962,38 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -854,15 +1014,16 @@ CONFIG_DAB=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -870,14 +1031,21 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
 #
 
 #
-# USB Gadget Support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
@@ -893,6 +1061,12 @@ CONFIG_DMA_ENGINE=y
 # DMA Clients
 #
 CONFIG_NET_DMA=y
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -901,10 +1075,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
@@ -913,16 +1088,22 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -941,15 +1122,13 @@ CONFIG_DNOTIFY=y
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -959,29 +1138,31 @@ CONFIG_TMPFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1013,9 +1194,6 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -1023,6 +1201,7 @@ CONFIG_INSTRUMENTATION=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1030,10 +1209,17 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1047,16 +1233,41 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
 
@@ -1065,24 +1276,117 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_XOR_BLOCKS=y
 CONFIG_ASYNC_CORE=y
 CONFIG_ASYNC_MEMCPY=y
 CONFIG_ASYNC_XOR=y
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
-- 
cgit v1.2.3


From 5b9eda3313b678f20f2bec08e8173f93e85f6c14 Mon Sep 17 00:00:00 2001
From: Aaro Koskinen <aaro.koskinen@iki.fi>
Date: Fri, 31 Jul 2009 12:16:21 +0300
Subject: iop3xx: ATU and PCI memory configuration corrected

There are two 64 MB outbound memory windows at bus addresses
0x80000000..0x83ffffff and 0x84000000..0x87ffffff for PCI
memory. Currently, on iop32x, only the lower window is available for
allocations, limiting the available space to 64 MB. On iop33x the full
128 MB can be allocated, but the translation value is wrong for the
upper window.

The patch enables the full 128 MB space on iop32x and corrects the
initialization of OMWTVR1. Redundant definitions are deleted. Tested
using a Thecus N2100 board with a graphics adapter in the expansion
slot. Both windows are in use:

  00:05.0 VGA compatible controller: XGI Technology Inc. (eXtreme Graphics
  Innovation) Volari Z7 (prog-if 00 [VGA controller])
  [...]
	Region 0: Memory at 80000000 (32-bit, prefetchable) [size=64M]
	Region 1: Memory at 84080000 (32-bit, non-prefetchable) [size=256K]

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Lennert Buytenhek <kernel@wantstofly.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 arch/arm/include/asm/hardware/iop3xx.h     | 1 +
 arch/arm/mach-iop32x/include/mach/iop32x.h | 2 --
 arch/arm/mach-iop33x/include/mach/iop33x.h | 2 --
 arch/arm/plat-iop/pci.c                    | 3 ++-
 4 files changed, 3 insertions(+), 5 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h
index 4b8e7f55992..8d60ad267e3 100644
--- a/arch/arm/include/asm/hardware/iop3xx.h
+++ b/arch/arm/include/asm/hardware/iop3xx.h
@@ -215,6 +215,7 @@ extern int iop3xx_get_init_atu(void);
  * IOP3XX I/O and Mem space regions for PCI autoconfiguration
  */
 #define IOP3XX_PCI_LOWER_MEM_PA	0x80000000
+#define IOP3XX_PCI_MEM_WINDOW_SIZE	0x08000000
 
 #define IOP3XX_PCI_IO_WINDOW_SIZE	0x00010000
 #define IOP3XX_PCI_LOWER_IO_PA		0x90000000
diff --git a/arch/arm/mach-iop32x/include/mach/iop32x.h b/arch/arm/mach-iop32x/include/mach/iop32x.h
index abd9eb49f10..941f363aca5 100644
--- a/arch/arm/mach-iop32x/include/mach/iop32x.h
+++ b/arch/arm/mach-iop32x/include/mach/iop32x.h
@@ -31,7 +31,5 @@
 #define IOP32X_MAX_RAM_SIZE            0x40000000UL
 #define IOP3XX_MAX_RAM_SIZE            IOP32X_MAX_RAM_SIZE
 #define IOP3XX_PCI_LOWER_MEM_BA        0x80000000
-#define IOP32X_PCI_MEM_WINDOW_SIZE     0x04000000
-#define IOP3XX_PCI_MEM_WINDOW_SIZE     IOP32X_PCI_MEM_WINDOW_SIZE
 
 #endif
diff --git a/arch/arm/mach-iop33x/include/mach/iop33x.h b/arch/arm/mach-iop33x/include/mach/iop33x.h
index 24567316ec8..a89c0a234bf 100644
--- a/arch/arm/mach-iop33x/include/mach/iop33x.h
+++ b/arch/arm/mach-iop33x/include/mach/iop33x.h
@@ -36,8 +36,6 @@
 #define IOP33X_MAX_RAM_SIZE		0x80000000UL
 #define IOP3XX_MAX_RAM_SIZE		IOP33X_MAX_RAM_SIZE
 #define IOP3XX_PCI_LOWER_MEM_BA	(PHYS_OFFSET + IOP33X_MAX_RAM_SIZE)
-#define IOP33X_PCI_MEM_WINDOW_SIZE	0x08000000
-#define IOP3XX_PCI_MEM_WINDOW_SIZE	IOP33X_PCI_MEM_WINDOW_SIZE
 
 
 #endif
diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c
index 77fa7cc7d16..ce31f316ac7 100644
--- a/arch/arm/plat-iop/pci.c
+++ b/arch/arm/plat-iop/pci.c
@@ -257,7 +257,8 @@ void __init iop3xx_atu_setup(void)
 	*IOP3XX_OUMWTVR0 = 0;
 
 	/* Outbound window 1 */
-	*IOP3XX_OMWTVR1 = IOP3XX_PCI_LOWER_MEM_BA + IOP3XX_PCI_MEM_WINDOW_SIZE;
+	*IOP3XX_OMWTVR1 = IOP3XX_PCI_LOWER_MEM_BA +
+			  IOP3XX_PCI_MEM_WINDOW_SIZE / 2;
 	*IOP3XX_OUMWTVR1 = 0;
 
 	/* BAR 3 ( Disabled ) */
-- 
cgit v1.2.3


From a692838dcaacb5f6f05fac73abb99d92dd7b1021 Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Sun, 2 Aug 2009 10:46:45 +0200
Subject: arch/arm/plat-iop: Use DIV_ROUND_CLOSEST

The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d
but is perhaps more readable.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@haskernel@
@@

#include <linux/kernel.h>

@depends on haskernel@
expression x,__divisor;
@@

- (((x) + ((__divisor) / 2)) / (__divisor))
+ DIV_ROUND_CLOSEST(x,__divisor)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 arch/arm/plat-iop/time.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
index 3695bbe3ee2..8da95d57c21 100644
--- a/arch/arm/plat-iop/time.c
+++ b/arch/arm/plat-iop/time.c
@@ -85,7 +85,7 @@ void __init iop_init_time(unsigned long tick_rate)
 {
 	u32 timer_ctl;
 
-	ticks_per_jiffy = (tick_rate + HZ/2) / HZ;
+	ticks_per_jiffy = DIV_ROUND_CLOSEST(tick_rate, HZ);
 	ticks_per_usec = tick_rate / 1000000;
 	next_jiffy_time = 0xffffffff;
 	iop_tick_rate = tick_rate;
-- 
cgit v1.2.3


From 9abea08e43c6cfc18399e42cbc6028d111532f61 Mon Sep 17 00:00:00 2001
From: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Date: Thu, 20 Aug 2009 16:18:07 +0300
Subject: OMAP: McBSP: Provide functions for ASoC frame syncronization

ASoC has an annoying bug letting either L or R channel to be
played on L channel. In other words, L and R channels can
switch at random. This provides McBSP funtionality that may
be used to fix this feature.

Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/plat-omap/include/mach/mcbsp.h |  2 ++
 arch/arm/plat-omap/mcbsp.c              | 52 +++++++++++++++++++++++++++++++++
 2 files changed, 54 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index 57249bb1e9b..b85e6e600ed 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -389,6 +389,8 @@ int omap_mcbsp_request(unsigned int id);
 void omap_mcbsp_free(unsigned int id);
 void omap_mcbsp_start(unsigned int id, int tx, int rx);
 void omap_mcbsp_stop(unsigned int id, int tx, int rx);
+void omap_mcbsp_xmit_enable(unsigned int id, u8 enable);
+void omap_mcbsp_recv_enable(unsigned int id, u8 enable);
 void omap_mcbsp_xmit_word(unsigned int id, u32 word);
 u32 omap_mcbsp_recv_word(unsigned int id);
 
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index a3d2313460b..0aa2524186f 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -412,6 +412,58 @@ void omap_mcbsp_stop(unsigned int id, int tx, int rx)
 }
 EXPORT_SYMBOL(omap_mcbsp_stop);
 
+void omap_mcbsp_xmit_enable(unsigned int id, u8 enable)
+{
+	struct omap_mcbsp *mcbsp;
+	void __iomem *io_base;
+	u16 w;
+
+	if (!(cpu_is_omap2430() || cpu_is_omap34xx()))
+		return;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return;
+	}
+
+	mcbsp = id_to_mcbsp_ptr(id);
+	io_base = mcbsp->io_base;
+
+	w = OMAP_MCBSP_READ(io_base, XCCR);
+
+	if (enable)
+		OMAP_MCBSP_WRITE(io_base, XCCR, w & ~(XDISABLE));
+	else
+		OMAP_MCBSP_WRITE(io_base, XCCR, w | XDISABLE);
+}
+EXPORT_SYMBOL(omap_mcbsp_xmit_enable);
+
+void omap_mcbsp_recv_enable(unsigned int id, u8 enable)
+{
+	struct omap_mcbsp *mcbsp;
+	void __iomem *io_base;
+	u16 w;
+
+	if (!(cpu_is_omap2430() || cpu_is_omap34xx()))
+		return;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return;
+	}
+
+	mcbsp = id_to_mcbsp_ptr(id);
+	io_base = mcbsp->io_base;
+
+	w = OMAP_MCBSP_READ(io_base, RCCR);
+
+	if (enable)
+		OMAP_MCBSP_WRITE(io_base, RCCR, w & ~(RDISABLE));
+	else
+		OMAP_MCBSP_WRITE(io_base, RCCR, w | RDISABLE);
+}
+EXPORT_SYMBOL(omap_mcbsp_recv_enable);
+
 /* polled mcbsp i/o operations */
 int omap_mcbsp_pollwrite(unsigned int id, u16 buf)
 {
-- 
cgit v1.2.3


From 946a49a95dabc9dd10344ae9ab4db9f14c5ad502 Mon Sep 17 00:00:00 2001
From: Eduardo Valentin <eduardo.valentin@nokia.com>
Date: Thu, 20 Aug 2009 16:18:08 +0300
Subject: OMAP: McBSP: Add IRQEN, IRQSTATUS, THRESHOLD2 and THRESHOLD1
 registers.

Adding McBSP register definition for IRQEN, IRQSTATUS, THRESHOLD2 and THRESHOLD1 registers.

Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/plat-omap/include/mach/mcbsp.h | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index b85e6e600ed..ceaf9eee61b 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -134,6 +134,10 @@
 #define OMAP_MCBSP_REG_XCERG	0x74
 #define OMAP_MCBSP_REG_XCERH	0x78
 #define OMAP_MCBSP_REG_SYSCON	0x8C
+#define OMAP_MCBSP_REG_THRSH2	0x90
+#define OMAP_MCBSP_REG_THRSH1	0x94
+#define OMAP_MCBSP_REG_IRQST	0xA0
+#define OMAP_MCBSP_REG_IRQEN	0xA4
 #define OMAP_MCBSP_REG_XCCR	0xAC
 #define OMAP_MCBSP_REG_RCCR	0xB0
 
-- 
cgit v1.2.3


From 44a6311c0a83f682bcf18fae389a1b270df29314 Mon Sep 17 00:00:00 2001
From: Eduardo Valentin <eduardo.valentin@nokia.com>
Date: Thu, 20 Aug 2009 16:18:09 +0300
Subject: OMAP: McBSP: Use appropriate value for startup delay

Increasing startup delay value as worst case:
 CLKSRG*2 = 8000khz: (1/8000) * 2 * 2 usec

Although, 100us may give enough time for two CLKSRG,
due to some unknown PM related, clock gating etc. reason,
this patch increases it to 500us.

Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/plat-omap/mcbsp.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 0aa2524186f..e9dd70320f7 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -365,7 +365,13 @@ void omap_mcbsp_start(unsigned int id, int tx, int rx)
 	w = OMAP_MCBSP_READ(io_base, SPCR1);
 	OMAP_MCBSP_WRITE(io_base, SPCR1, w | (rx & 1));
 
-	udelay(100);
+	/*
+	 * Worst case: CLKSRG*2 = 8000khz: (1/8000) * 2 * 2 usec
+	 * REVISIT: 100us may give enough time for two CLKSRG, however
+	 * due to some unknown PM related, clock gating etc. reason it
+	 * is now at 500us.
+	 */
+	udelay(500);
 
 	if (idle) {
 		/* Start frame sync */
-- 
cgit v1.2.3


From 7aa9ff56cae7a6a4fa2e1a503cc5f8bbd887d6e3 Mon Sep 17 00:00:00 2001
From: Eduardo Valentin <eduardo.valentin@nokia.com>
Date: Thu, 20 Aug 2009 16:18:10 +0300
Subject: OMAP: McBSP: Add transmit/receive threshold handler

This patch adds a way to handle transmit/receive threshold.
It export to mcbsp users a callback registration procedure.

Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/plat-omap/include/mach/mcbsp.h |  9 ++++++
 arch/arm/plat-omap/mcbsp.c              | 50 +++++++++++++++++++++++++++++++++
 2 files changed, 59 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index ceaf9eee61b..2544aa5bccd 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -389,6 +389,15 @@ int omap_mcbsp_init(void);
 void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
 					int size);
 void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config);
+#ifdef CONFIG_ARCH_OMAP34XX
+void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold);
+void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold);
+#else
+static inline void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold)
+{ }
+static inline void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
+{ }
+#endif
 int omap_mcbsp_request(unsigned int id);
 void omap_mcbsp_free(unsigned int id);
 void omap_mcbsp_start(unsigned int id, int tx, int rx);
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index e9dd70320f7..081f2eace92 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -198,6 +198,56 @@ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config)
 }
 EXPORT_SYMBOL(omap_mcbsp_config);
 
+#ifdef CONFIG_ARCH_OMAP34XX
+/*
+ * omap_mcbsp_set_tx_threshold configures how to deal
+ * with transmit threshold. the threshold value and handler can be
+ * configure in here.
+ */
+void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold)
+{
+	struct omap_mcbsp *mcbsp;
+	void __iomem *io_base;
+
+	if (!cpu_is_omap34xx())
+		return;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return;
+	}
+	mcbsp = id_to_mcbsp_ptr(id);
+	io_base = mcbsp->io_base;
+
+	OMAP_MCBSP_WRITE(io_base, THRSH2, threshold);
+}
+EXPORT_SYMBOL(omap_mcbsp_set_tx_threshold);
+
+/*
+ * omap_mcbsp_set_rx_threshold configures how to deal
+ * with receive threshold. the threshold value and handler can be
+ * configure in here.
+ */
+void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
+{
+	struct omap_mcbsp *mcbsp;
+	void __iomem *io_base;
+
+	if (!cpu_is_omap34xx())
+		return;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return;
+	}
+	mcbsp = id_to_mcbsp_ptr(id);
+	io_base = mcbsp->io_base;
+
+	OMAP_MCBSP_WRITE(io_base, THRSH1, threshold);
+}
+EXPORT_SYMBOL(omap_mcbsp_set_rx_threshold);
+#endif
+
 /*
  * We can choose between IRQ based or polled IO.
  * This needs to be called before omap_mcbsp_request().
-- 
cgit v1.2.3


From a1a56f5faa41327116bf960a8e79f21a8ea35dce Mon Sep 17 00:00:00 2001
From: Eduardo Valentin <eduardo.valentin@nokia.com>
Date: Thu, 20 Aug 2009 16:18:11 +0300
Subject: OMAP: McBSP: Create and export max_(r|t)x_thres property

This patch export through sysfs two properties to configure
maximum threshold for transmission and reception on each
mcbsp instance. Also, it exports two helper functions to
allow mcbsp users to read this values.

Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/mach-omap2/mcbsp.c             |   5 ++
 arch/arm/plat-omap/include/mach/mcbsp.h |  11 +++
 arch/arm/plat-omap/mcbsp.c              | 122 ++++++++++++++++++++++++++++++++
 3 files changed, 138 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index a5c0f0435cd..f837114d1d6 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -129,6 +129,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP1_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP1_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
+		.buffer_size	= 0x7F,
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP2_BASE,
@@ -137,6 +138,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP2_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP2_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
+		.buffer_size	= 0x3FF,
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP3_BASE,
@@ -145,6 +147,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP3_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP3_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
+		.buffer_size	= 0x7F,
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP4_BASE,
@@ -153,6 +156,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP4_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP4_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
+		.buffer_size	= 0x7F,
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP5_BASE,
@@ -161,6 +165,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP5_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP5_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
+		.buffer_size	= 0x7F,
 	},
 };
 #define OMAP34XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap34xx_mcbsp_pdata)
diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index 2544aa5bccd..832330d7cb3 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -348,6 +348,9 @@ struct omap_mcbsp_platform_data {
 	u8 dma_rx_sync, dma_tx_sync;
 	u16 rx_irq, tx_irq;
 	struct omap_mcbsp_ops *ops;
+#ifdef CONFIG_ARCH_OMAP34XX
+	u16 buffer_size;
+#endif
 };
 
 struct omap_mcbsp {
@@ -381,6 +384,10 @@ struct omap_mcbsp {
 	struct omap_mcbsp_platform_data *pdata;
 	struct clk *iclk;
 	struct clk *fclk;
+#ifdef CONFIG_ARCH_OMAP34XX
+	u16 max_tx_thres;
+	u16 max_rx_thres;
+#endif
 };
 extern struct omap_mcbsp **mcbsp_ptr;
 extern int omap_mcbsp_count;
@@ -392,11 +399,15 @@ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config
 #ifdef CONFIG_ARCH_OMAP34XX
 void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold);
 void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold);
+u16 omap_mcbsp_get_max_tx_threshold(unsigned int id);
+u16 omap_mcbsp_get_max_rx_threshold(unsigned int id);
 #else
 static inline void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold)
 { }
 static inline void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
 { }
+static inline u16 omap_mcbsp_get_max_tx_threshold(unsigned int id) { return 0; }
+static inline u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) { return 0; }
 #endif
 int omap_mcbsp_request(unsigned int id);
 void omap_mcbsp_free(unsigned int id);
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 081f2eace92..0bbc912e548 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -246,6 +246,42 @@ void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
 	OMAP_MCBSP_WRITE(io_base, THRSH1, threshold);
 }
 EXPORT_SYMBOL(omap_mcbsp_set_rx_threshold);
+
+/*
+ * omap_mcbsp_get_max_tx_thres just return the current configured
+ * maximum threshold for transmission
+ */
+u16 omap_mcbsp_get_max_tx_threshold(unsigned int id)
+{
+	struct omap_mcbsp *mcbsp;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return -ENODEV;
+	}
+	mcbsp = id_to_mcbsp_ptr(id);
+
+	return mcbsp->max_tx_thres;
+}
+EXPORT_SYMBOL(omap_mcbsp_get_max_tx_threshold);
+
+/*
+ * omap_mcbsp_get_max_rx_thres just return the current configured
+ * maximum threshold for reception
+ */
+u16 omap_mcbsp_get_max_rx_threshold(unsigned int id)
+{
+	struct omap_mcbsp *mcbsp;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return -ENODEV;
+	}
+	mcbsp = id_to_mcbsp_ptr(id);
+
+	return mcbsp->max_rx_thres;
+}
+EXPORT_SYMBOL(omap_mcbsp_get_max_rx_threshold);
 #endif
 
 /*
@@ -1005,6 +1041,86 @@ void omap_mcbsp_set_spi_mode(unsigned int id,
 }
 EXPORT_SYMBOL(omap_mcbsp_set_spi_mode);
 
+#ifdef CONFIG_ARCH_OMAP34XX
+#define max_thres(m)			(mcbsp->pdata->buffer_size)
+#define valid_threshold(m, val)		((val) <= max_thres(m))
+#define THRESHOLD_PROP_BUILDER(prop)					\
+static ssize_t prop##_show(struct device *dev,				\
+			struct device_attribute *attr, char *buf)	\
+{									\
+	struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);		\
+									\
+	return sprintf(buf, "%u\n", mcbsp->prop);			\
+}									\
+									\
+static ssize_t prop##_store(struct device *dev,				\
+				struct device_attribute *attr,		\
+				const char *buf, size_t size)		\
+{									\
+	struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);		\
+	unsigned long val;						\
+	int status;							\
+									\
+	status = strict_strtoul(buf, 0, &val);				\
+	if (status)							\
+		return status;						\
+									\
+	if (!valid_threshold(mcbsp, val))				\
+		return -EDOM;						\
+									\
+	mcbsp->prop = val;						\
+	return size;							\
+}									\
+									\
+static DEVICE_ATTR(prop, 0644, prop##_show, prop##_store);
+
+THRESHOLD_PROP_BUILDER(max_tx_thres);
+THRESHOLD_PROP_BUILDER(max_rx_thres);
+
+static const struct attribute *threshold_attrs[] = {
+	&dev_attr_max_tx_thres.attr,
+	&dev_attr_max_rx_thres.attr,
+	NULL,
+};
+
+static const struct attribute_group threshold_attr_group = {
+	.attrs = (struct attribute **)threshold_attrs,
+};
+
+static inline int __devinit omap_thres_add(struct device *dev)
+{
+	return sysfs_create_group(&dev->kobj, &threshold_attr_group);
+}
+
+static inline void __devexit omap_thres_remove(struct device *dev)
+{
+	sysfs_remove_group(&dev->kobj, &threshold_attr_group);
+}
+
+static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp)
+{
+	if (cpu_is_omap34xx()) {
+		mcbsp->max_tx_thres = max_thres(mcbsp);
+		mcbsp->max_rx_thres = max_thres(mcbsp);
+		if (omap_thres_add(mcbsp->dev))
+			dev_warn(mcbsp->dev,
+				"Unable to create threshold controls\n");
+	} else {
+		mcbsp->max_tx_thres = -EINVAL;
+		mcbsp->max_rx_thres = -EINVAL;
+	}
+}
+
+static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp)
+{
+	if (cpu_is_omap34xx())
+		omap_thres_remove(mcbsp->dev);
+}
+#else
+static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp) {}
+static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp) {}
+#endif /* CONFIG_ARCH_OMAP34XX */
+
 /*
  * McBSP1 and McBSP3 are directly mapped on 1610 and 1510.
  * 730 has only 2 McBSP, and both of them are MPU peripherals.
@@ -1075,6 +1191,10 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev)
 	mcbsp->dev = &pdev->dev;
 	mcbsp_ptr[id] = mcbsp;
 	platform_set_drvdata(pdev, mcbsp);
+
+	/* Initialize mcbsp properties for OMAP34XX if needed / applicable */
+	omap34xx_device_init(mcbsp);
+
 	return 0;
 
 err_fclk:
@@ -1098,6 +1218,8 @@ static int __devexit omap_mcbsp_remove(struct platform_device *pdev)
 				mcbsp->pdata->ops->free)
 			mcbsp->pdata->ops->free(mcbsp->id);
 
+		omap34xx_device_exit(mcbsp);
+
 		clk_disable(mcbsp->fclk);
 		clk_disable(mcbsp->iclk);
 		clk_put(mcbsp->fclk);
-- 
cgit v1.2.3


From 7e4f943b725008272d5c50e676a89d642232a4e3 Mon Sep 17 00:00:00 2001
From: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Date: Thu, 20 Aug 2009 16:18:12 +0300
Subject: OMAP3: McBSP: Lower the maximum buffersize for McBSP1, 3, 4, 5

Do not allow applications to use the full buffer found on
McBSP1,3,4,5. Using the full buffer in threshold mode causes
the McBSP buffer to run dry, which can be observed as channels
are switching (in reality the channels are shifting).

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/mach-omap2/mcbsp.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index f837114d1d6..7d22caf6009 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -129,7 +129,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP1_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP1_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.buffer_size	= 0x7F,
+		.buffer_size	= 0x6F,
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP2_BASE,
@@ -147,7 +147,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP3_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP3_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.buffer_size	= 0x7F,
+		.buffer_size	= 0x6F,
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP4_BASE,
@@ -156,7 +156,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP4_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP4_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.buffer_size	= 0x7F,
+		.buffer_size	= 0x6F,
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP5_BASE,
@@ -165,7 +165,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP5_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP5_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.buffer_size	= 0x7F,
+		.buffer_size	= 0x6F,
 	},
 };
 #define OMAP34XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap34xx_mcbsp_pdata)
-- 
cgit v1.2.3


From 4c8200aeb04b8aeaf8c7425f49caf761e2cda95a Mon Sep 17 00:00:00 2001
From: Eduardo Valentin <eduardo.valentin@nokia.com>
Date: Thu, 20 Aug 2009 16:18:13 +0300
Subject: OMAP: McBSP: Rename thres sysfs symbols

This patch renames the symbols that handles threshold
sysfs properties. This way we can add more sysfs properties
to them.

Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/plat-omap/mcbsp.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 0bbc912e548..ccaa9aedb0a 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -1077,24 +1077,24 @@ static DEVICE_ATTR(prop, 0644, prop##_show, prop##_store);
 THRESHOLD_PROP_BUILDER(max_tx_thres);
 THRESHOLD_PROP_BUILDER(max_rx_thres);
 
-static const struct attribute *threshold_attrs[] = {
+static const struct attribute *additional_attrs[] = {
 	&dev_attr_max_tx_thres.attr,
 	&dev_attr_max_rx_thres.attr,
 	NULL,
 };
 
-static const struct attribute_group threshold_attr_group = {
-	.attrs = (struct attribute **)threshold_attrs,
+static const struct attribute_group additional_attr_group = {
+	.attrs = (struct attribute **)additional_attrs,
 };
 
-static inline int __devinit omap_thres_add(struct device *dev)
+static inline int __devinit omap_additional_add(struct device *dev)
 {
-	return sysfs_create_group(&dev->kobj, &threshold_attr_group);
+	return sysfs_create_group(&dev->kobj, &additional_attr_group);
 }
 
-static inline void __devexit omap_thres_remove(struct device *dev)
+static inline void __devexit omap_additional_remove(struct device *dev)
 {
-	sysfs_remove_group(&dev->kobj, &threshold_attr_group);
+	sysfs_remove_group(&dev->kobj, &additional_attr_group);
 }
 
 static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp)
@@ -1102,9 +1102,9 @@ static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp)
 	if (cpu_is_omap34xx()) {
 		mcbsp->max_tx_thres = max_thres(mcbsp);
 		mcbsp->max_rx_thres = max_thres(mcbsp);
-		if (omap_thres_add(mcbsp->dev))
+		if (omap_additional_add(mcbsp->dev))
 			dev_warn(mcbsp->dev,
-				"Unable to create threshold controls\n");
+				"Unable to create additional controls\n");
 	} else {
 		mcbsp->max_tx_thres = -EINVAL;
 		mcbsp->max_rx_thres = -EINVAL;
@@ -1114,7 +1114,7 @@ static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp)
 static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp)
 {
 	if (cpu_is_omap34xx())
-		omap_thres_remove(mcbsp->dev);
+		omap_additional_remove(mcbsp->dev);
 }
 #else
 static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp) {}
-- 
cgit v1.2.3


From 98cb20e88957faf9c99e194242caac7f55dd47e4 Mon Sep 17 00:00:00 2001
From: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Date: Thu, 20 Aug 2009 16:18:14 +0300
Subject: OMAP: McBSP: Add link DMA mode selection

It adds a new sysfs file, where the user can configure the mcbsp mode to use.
If the mcbsp channel is in use, it does not allow the change.
Than in omap_pcm_open we can call the omap_mcbsp_get_opmode to get the mode,
store it, than use it to implement the different modes.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/plat-omap/include/mach/mcbsp.h |  8 ++++
 arch/arm/plat-omap/mcbsp.c              | 84 +++++++++++++++++++++++++++++++++
 2 files changed, 92 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index 832330d7cb3..bd5b759991c 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -255,6 +255,11 @@
 /********************** McBSP SYSCONFIG bit definitions ********************/
 #define SOFTRST			0x0002
 
+/********************** McBSP DMA operating modes **************************/
+#define MCBSP_DMA_MODE_ELEMENT		0
+#define MCBSP_DMA_MODE_THRESHOLD	1
+#define MCBSP_DMA_MODE_FRAME		2
+
 /* we don't do multichannel for now */
 struct omap_mcbsp_reg_cfg {
 	u16 spcr2;
@@ -385,6 +390,7 @@ struct omap_mcbsp {
 	struct clk *iclk;
 	struct clk *fclk;
 #ifdef CONFIG_ARCH_OMAP34XX
+	int dma_op_mode;
 	u16 max_tx_thres;
 	u16 max_rx_thres;
 #endif
@@ -401,6 +407,7 @@ void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold);
 void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold);
 u16 omap_mcbsp_get_max_tx_threshold(unsigned int id);
 u16 omap_mcbsp_get_max_rx_threshold(unsigned int id);
+int omap_mcbsp_get_dma_op_mode(unsigned int id);
 #else
 static inline void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold)
 { }
@@ -408,6 +415,7 @@ static inline void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
 { }
 static inline u16 omap_mcbsp_get_max_tx_threshold(unsigned int id) { return 0; }
 static inline u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) { return 0; }
+static inline int omap_mcbsp_get_dma_op_mode(unsigned int id) { return 0; }
 #endif
 int omap_mcbsp_request(unsigned int id);
 void omap_mcbsp_free(unsigned int id);
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index ccaa9aedb0a..9e699947a69 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -282,6 +282,29 @@ u16 omap_mcbsp_get_max_rx_threshold(unsigned int id)
 	return mcbsp->max_rx_thres;
 }
 EXPORT_SYMBOL(omap_mcbsp_get_max_rx_threshold);
+
+/*
+ * omap_mcbsp_get_dma_op_mode just return the current configured
+ * operating mode for the mcbsp channel
+ */
+int omap_mcbsp_get_dma_op_mode(unsigned int id)
+{
+	struct omap_mcbsp *mcbsp;
+	int dma_op_mode;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%u)\n", __func__, id + 1);
+		return -ENODEV;
+	}
+	mcbsp = id_to_mcbsp_ptr(id);
+
+	spin_lock_irq(&mcbsp->lock);
+	dma_op_mode = mcbsp->dma_op_mode;
+	spin_unlock_irq(&mcbsp->lock);
+
+	return dma_op_mode;
+}
+EXPORT_SYMBOL(omap_mcbsp_get_dma_op_mode);
 #endif
 
 /*
@@ -1077,9 +1100,65 @@ static DEVICE_ATTR(prop, 0644, prop##_show, prop##_store);
 THRESHOLD_PROP_BUILDER(max_tx_thres);
 THRESHOLD_PROP_BUILDER(max_rx_thres);
 
+static ssize_t dma_op_mode_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);
+	int dma_op_mode;
+
+	spin_lock_irq(&mcbsp->lock);
+	dma_op_mode = mcbsp->dma_op_mode;
+	spin_unlock_irq(&mcbsp->lock);
+
+	return sprintf(buf, "current mode: %d\n"
+			"possible mode values are:\n"
+			"%d - %s\n"
+			"%d - %s\n"
+			"%d - %s\n",
+			dma_op_mode,
+			MCBSP_DMA_MODE_ELEMENT, "element mode",
+			MCBSP_DMA_MODE_THRESHOLD, "threshold mode",
+			MCBSP_DMA_MODE_FRAME, "frame mode");
+}
+
+static ssize_t dma_op_mode_store(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t size)
+{
+	struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);
+	unsigned long val;
+	int status;
+
+	status = strict_strtoul(buf, 0, &val);
+	if (status)
+		return status;
+
+	spin_lock_irq(&mcbsp->lock);
+
+	if (!mcbsp->free) {
+		size = -EBUSY;
+		goto unlock;
+	}
+
+	if (val > MCBSP_DMA_MODE_FRAME || val < MCBSP_DMA_MODE_ELEMENT) {
+		size = -EINVAL;
+		goto unlock;
+	}
+
+	mcbsp->dma_op_mode = val;
+
+unlock:
+	spin_unlock_irq(&mcbsp->lock);
+
+	return size;
+}
+
+static DEVICE_ATTR(dma_op_mode, 0644, dma_op_mode_show, dma_op_mode_store);
+
 static const struct attribute *additional_attrs[] = {
 	&dev_attr_max_tx_thres.attr,
 	&dev_attr_max_rx_thres.attr,
+	&dev_attr_dma_op_mode.attr,
 	NULL,
 };
 
@@ -1099,9 +1178,14 @@ static inline void __devexit omap_additional_remove(struct device *dev)
 
 static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp)
 {
+	mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT;
 	if (cpu_is_omap34xx()) {
 		mcbsp->max_tx_thres = max_thres(mcbsp);
 		mcbsp->max_rx_thres = max_thres(mcbsp);
+		/*
+		 * REVISIT: Set dmap_op_mode to THRESHOLD as default
+		 * for mcbsp2 instances.
+		 */
 		if (omap_additional_add(mcbsp->dev))
 			dev_warn(mcbsp->dev,
 				"Unable to create additional controls\n");
-- 
cgit v1.2.3


From 2122fdc629f05634537e796c0630028e4db76953 Mon Sep 17 00:00:00 2001
From: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Date: Thu, 20 Aug 2009 16:18:15 +0300
Subject: OMAP: McBSP: Wakeups utilized

This patch enables the smart idle mode while
McBPS is being utilized. Once it's done,
force idle mode is taken instead. Apart of it,
it also configures what signals will wake mcbsp up.

Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/plat-omap/include/mach/mcbsp.h | 17 ++++++++++++
 arch/arm/plat-omap/mcbsp.c              | 46 +++++++++++++++++++++++++++++++++
 2 files changed, 63 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index bd5b759991c..333061d4f4a 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -138,6 +138,7 @@
 #define OMAP_MCBSP_REG_THRSH1	0x94
 #define OMAP_MCBSP_REG_IRQST	0xA0
 #define OMAP_MCBSP_REG_IRQEN	0xA4
+#define OMAP_MCBSP_REG_WAKEUPEN	0xA8
 #define OMAP_MCBSP_REG_XCCR	0xAC
 #define OMAP_MCBSP_REG_RCCR	0xB0
 
@@ -253,6 +254,8 @@
 #define RDISABLE		0x0001
 
 /********************** McBSP SYSCONFIG bit definitions ********************/
+#define SIDLEMODE(value)	((value)<<3)
+#define ENAWAKEUP		0x0004
 #define SOFTRST			0x0002
 
 /********************** McBSP DMA operating modes **************************/
@@ -260,6 +263,20 @@
 #define MCBSP_DMA_MODE_THRESHOLD	1
 #define MCBSP_DMA_MODE_FRAME		2
 
+/********************** McBSP WAKEUPEN bit definitions *********************/
+#define XEMPTYEOFEN		0x4000
+#define XRDYEN			0x0400
+#define XEOFEN			0x0200
+#define XFSXEN			0x0100
+#define XSYNCERREN		0x0080
+#define RRDYEN			0x0008
+#define REOFEN			0x0004
+#define RFSREN			0x0002
+#define RSYNCERREN		0x0001
+#define WAKEUPEN_ALL		(XEMPTYEOFEN | XRDYEN | XEOFEN | XFSXEN | \
+				 XSYNCERREN | RRDYEN | REOFEN | RFSREN | \
+				 RSYNCERREN)
+
 /* we don't do multichannel for now */
 struct omap_mcbsp_reg_cfg {
 	u16 spcr2;
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 9e699947a69..136f8c5d0da 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -305,6 +305,46 @@ int omap_mcbsp_get_dma_op_mode(unsigned int id)
 	return dma_op_mode;
 }
 EXPORT_SYMBOL(omap_mcbsp_get_dma_op_mode);
+
+static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp)
+{
+	/*
+	 * Enable wakup behavior, smart idle and all wakeups
+	 * REVISIT: some wakeups may be unnecessary
+	 */
+	if (cpu_is_omap34xx()) {
+		u16 syscon;
+
+		syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON);
+		syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03));
+		syscon |= (ENAWAKEUP | SIDLEMODE(0x02));
+		OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
+
+		OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, WAKEUPEN_ALL);
+	}
+}
+
+static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp)
+{
+	/*
+	 * Disable wakup behavior, smart idle and all wakeups
+	 */
+	if (cpu_is_omap34xx()) {
+		u16 syscon;
+		u16 wakeupen;
+
+		syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON);
+		syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03));
+		OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
+
+		wakeupen = OMAP_MCBSP_READ(mcbsp->io_base, WAKEUPEN);
+		wakeupen &= ~WAKEUPEN_ALL;
+		OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, wakeupen);
+	}
+}
+#else
+static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp) {}
+static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp) {}
 #endif
 
 /*
@@ -366,6 +406,9 @@ int omap_mcbsp_request(unsigned int id)
 	clk_enable(mcbsp->iclk);
 	clk_enable(mcbsp->fclk);
 
+	/* Do procedure specific to omap34xx arch, if applicable */
+	omap34xx_mcbsp_request(mcbsp);
+
 	/*
 	 * Make sure that transmitter, receiver and sample-rate generator are
 	 * not running before activating IRQs.
@@ -414,6 +457,9 @@ void omap_mcbsp_free(unsigned int id)
 	if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
 		mcbsp->pdata->ops->free(id);
 
+	/* Do procedure specific to omap34xx arch, if applicable */
+	omap34xx_mcbsp_free(mcbsp);
+
 	clk_disable(mcbsp->fclk);
 	clk_disable(mcbsp->iclk);
 
-- 
cgit v1.2.3


From d9a9b3f5f7d4736cfe6fae95b9d63b07faeb702e Mon Sep 17 00:00:00 2001
From: Eduardo Valentin <eduardo.valentin@nokia.com>
Date: Thu, 20 Aug 2009 16:18:16 +0300
Subject: OMAP: McBSP: Change wakeup signals

Configure only XRDYEN and RRDYEN wakeup signals
in order to get better power consumption.

Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/plat-omap/include/mach/mcbsp.h | 3 ---
 arch/arm/plat-omap/mcbsp.c              | 7 ++-----
 2 files changed, 2 insertions(+), 8 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index 333061d4f4a..fe10ae8b027 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -273,9 +273,6 @@
 #define REOFEN			0x0004
 #define RFSREN			0x0002
 #define RSYNCERREN		0x0001
-#define WAKEUPEN_ALL		(XEMPTYEOFEN | XRDYEN | XEOFEN | XFSXEN | \
-				 XSYNCERREN | RRDYEN | REOFEN | RFSREN | \
-				 RSYNCERREN)
 
 /* we don't do multichannel for now */
 struct omap_mcbsp_reg_cfg {
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 136f8c5d0da..86bfad88abd 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -320,7 +320,7 @@ static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp)
 		syscon |= (ENAWAKEUP | SIDLEMODE(0x02));
 		OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
 
-		OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, WAKEUPEN_ALL);
+		OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, XRDYEN | RRDYEN);
 	}
 }
 
@@ -331,15 +331,12 @@ static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp)
 	 */
 	if (cpu_is_omap34xx()) {
 		u16 syscon;
-		u16 wakeupen;
 
 		syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON);
 		syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03));
 		OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
 
-		wakeupen = OMAP_MCBSP_READ(mcbsp->io_base, WAKEUPEN);
-		wakeupen &= ~WAKEUPEN_ALL;
-		OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, wakeupen);
+		OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, 0);
 	}
 }
 #else
-- 
cgit v1.2.3


From 2ba93f8fa77c0140de163e8a31bb9c09b5ded74c Mon Sep 17 00:00:00 2001
From: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Date: Thu, 20 Aug 2009 16:18:17 +0300
Subject: OMAP: McBSP: Retain McBSP FCLK clockactivity

FCLK may get autogated so that it prevents the McBSP
to work properly. It is the bit 9 that must be set
for maintaining the McBSP FCLK.

Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/plat-omap/include/mach/mcbsp.h | 1 +
 arch/arm/plat-omap/mcbsp.c              | 6 +++---
 2 files changed, 4 insertions(+), 3 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index fe10ae8b027..70e950e295e 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -254,6 +254,7 @@
 #define RDISABLE		0x0001
 
 /********************** McBSP SYSCONFIG bit definitions ********************/
+#define CLOCKACTIVITY(value)	((value)<<8)
 #define SIDLEMODE(value)	((value)<<3)
 #define ENAWAKEUP		0x0004
 #define SOFTRST			0x0002
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 86bfad88abd..2c274e6f0de 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -316,8 +316,8 @@ static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp)
 		u16 syscon;
 
 		syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON);
-		syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03));
-		syscon |= (ENAWAKEUP | SIDLEMODE(0x02));
+		syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03));
+		syscon |= (ENAWAKEUP | SIDLEMODE(0x02) | CLOCKACTIVITY(0x02));
 		OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
 
 		OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, XRDYEN | RRDYEN);
@@ -333,7 +333,7 @@ static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp)
 		u16 syscon;
 
 		syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON);
-		syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03));
+		syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03));
 		OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
 
 		OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, 0);
-- 
cgit v1.2.3


From d99a7454e57d3dc9d04d6a77292a056f430a9ece Mon Sep 17 00:00:00 2001
From: Eduardo Valentin <eduardo.valentin@nokia.com>
Date: Thu, 20 Aug 2009 16:18:18 +0300
Subject: OMAP: McBSP: Configure NO IDLE mode for DMA mode different of
 threshold

Use dma mode property to configure NO IDLE or SMART IDLE of McBSPs.

Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/plat-omap/mcbsp.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 2c274e6f0de..85176a5f414 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -317,7 +317,15 @@ static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp)
 
 		syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON);
 		syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03));
-		syscon |= (ENAWAKEUP | SIDLEMODE(0x02) | CLOCKACTIVITY(0x02));
+
+		spin_lock_irq(&mcbsp->lock);
+		if (mcbsp->dma_op_mode == MCBSP_DMA_MODE_THRESHOLD)
+			syscon |= SIDLEMODE(0x02);
+		else
+			syscon |= SIDLEMODE(0x01);
+		spin_unlock_irq(&mcbsp->lock);
+
+		syscon |= (ENAWAKEUP | CLOCKACTIVITY(0x02));
 		OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
 
 		OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, XRDYEN | RRDYEN);
-- 
cgit v1.2.3


From fa3935ba34667ffd35fbb33958cd1d67035fdf82 Mon Sep 17 00:00:00 2001
From: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Date: Thu, 20 Aug 2009 16:18:19 +0300
Subject: OMAP: McBSP: Do not enable wakeups for no-idle mode

When no-idle mode is taken, wakeups need not to be enabled.
Moreover, CLOCKACTIVITY bits are unnecessary with this mode
also.

Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Acked-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/plat-omap/mcbsp.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 85176a5f414..56a56887ded 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -319,16 +319,17 @@ static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp)
 		syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03));
 
 		spin_lock_irq(&mcbsp->lock);
-		if (mcbsp->dma_op_mode == MCBSP_DMA_MODE_THRESHOLD)
-			syscon |= SIDLEMODE(0x02);
-		else
+		if (mcbsp->dma_op_mode == MCBSP_DMA_MODE_THRESHOLD) {
+			syscon |= (ENAWAKEUP | SIDLEMODE(0x02) |
+					CLOCKACTIVITY(0x02));
+			OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN,
+					XRDYEN | RRDYEN);
+		} else {
 			syscon |= SIDLEMODE(0x01);
+		}
 		spin_unlock_irq(&mcbsp->lock);
 
-		syscon |= (ENAWAKEUP | CLOCKACTIVITY(0x02));
 		OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
-
-		OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, XRDYEN | RRDYEN);
 	}
 }
 
-- 
cgit v1.2.3


From 72cc6d715d5b018e2cff4adb68966855850d4e77 Mon Sep 17 00:00:00 2001
From: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Date: Thu, 20 Aug 2009 16:18:20 +0300
Subject: OMAP: McBSP: Let element DMA mode hit retention also

The device no longer hits retention if element DMA
mode is taken for at least the duration of the
serial console timeout. Force element DMA mode to
shut down through smartidle.

Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Acked-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/plat-omap/mcbsp.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 56a56887ded..b63a7209b41 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -343,6 +343,15 @@ static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp)
 
 		syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON);
 		syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03));
+		/*
+		 * HW bug workaround - If no_idle mode is taken, we need to
+		 * go to smart_idle before going to always_idle, or the
+		 * device will not hit retention anymore.
+		 */
+		syscon |= SIDLEMODE(0x02);
+		OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
+
+		syscon &= ~(SIDLEMODE(0x03));
 		OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
 
 		OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, 0);
-- 
cgit v1.2.3


From 14412acde5b57450b8afb3d4b03132419b6abebf Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 20 Aug 2009 22:50:40 +0100
Subject: ASoC: S3C24XX: Add audio core and tlv320aic23 for Simtec boards

Add core support for the range of S3C24XX Simtec boards with TLV320AIC23
CODECs on them. Since there are also boards with similar IIS routing the
AMP and the configuration code is placed in a core file for re-use with
other CODEC bindings.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/plat-s3c/include/plat/audio-simtec.h | 37 +++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)
 create mode 100644 arch/arm/plat-s3c/include/plat/audio-simtec.h

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c/include/plat/audio-simtec.h b/arch/arm/plat-s3c/include/plat/audio-simtec.h
new file mode 100644
index 00000000000..0f440b9168d
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/audio-simtec.h
@@ -0,0 +1,37 @@
+/* arch/arm/plat-s3c/include/plat/audio-simtec.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Simtec Audio support.
+*/
+
+/**
+ * struct s3c24xx_audio_simtec_pdata - platform data for simtec audio
+ * @use_mpllin: Select codec clock from MPLLin
+ * @output_cdclk: Need to output CDCLK to the codec
+ * @have_mic: Set if we have a MIC socket
+ * @have_lout: Set if we have a LineOut socket
+ * @amp_gpio: GPIO pin to enable the AMP
+ * @amp_gain: Option GPIO to control AMP gain
+ */
+struct s3c24xx_audio_simtec_pdata {
+	unsigned int	use_mpllin:1;
+	unsigned int	output_cdclk:1;
+
+	unsigned int	have_mic:1;
+	unsigned int	have_lout:1;
+
+	int		amp_gpio;
+	int		amp_gain[2];
+
+	void	(*startup)(void);
+};
+
+extern int simtec_audio_add(const char *codec_name,
+			    struct s3c24xx_audio_simtec_pdata *pdata);
-- 
cgit v1.2.3


From 9f0f4ae570a148c76be6e86c959c8d4ed912fb1f Mon Sep 17 00:00:00 2001
From: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Date: Sun, 23 Aug 2009 17:56:12 +0200
Subject: ARM: OMAP: DMA: Add support for DMA channel self linking on OMAP1510

Implement DMA channel self linking on OMAP1510 using AUTO_INIT and REPEAT
flags of the DMA CCR register.

Created against linux-2.6.31-rc5.

Tested on Amstrad Delta.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/plat-omap/dma.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index def14ec265b..da4cc5288db 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -1125,6 +1125,11 @@ int omap_dma_running(void)
 void omap_dma_link_lch(int lch_head, int lch_queue)
 {
 	if (omap_dma_in_1510_mode()) {
+		if (lch_head == lch_queue) {
+			dma_write(dma_read(CCR(lch_head)) | (3 << 8),
+								CCR(lch_head));
+			return;
+		}
 		printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
 		BUG();
 		return;
@@ -1147,6 +1152,11 @@ EXPORT_SYMBOL(omap_dma_link_lch);
 void omap_dma_unlink_lch(int lch_head, int lch_queue)
 {
 	if (omap_dma_in_1510_mode()) {
+		if (lch_head == lch_queue) {
+			dma_write(dma_read(CCR(lch_head)) & ~(3 << 8),
+								CCR(lch_head));
+			return;
+		}
 		printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
 		BUG();
 		return;
-- 
cgit v1.2.3


From 9b30050908fad96968497e73b88626056ea33c96 Mon Sep 17 00:00:00 2001
From: Jarkko Nikula <jhnikula@gmail.com>
Date: Mon, 24 Aug 2009 17:45:50 +0300
Subject: OMAP: McBSP: Use textual values in DMA operating mode sysfs files

Use more descriptive than numerical value when showing and storing the
McBSP DMA operating mode. Show function is using similar syntax than e.g.
the led triggers so that all possible values for store function are
printed but with current value surrounded with square brackets.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/plat-omap/mcbsp.c | 48 ++++++++++++++++++++++++----------------------
 1 file changed, 25 insertions(+), 23 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index b63a7209b41..ee60ab68251 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -1161,25 +1161,31 @@ static DEVICE_ATTR(prop, 0644, prop##_show, prop##_store);
 THRESHOLD_PROP_BUILDER(max_tx_thres);
 THRESHOLD_PROP_BUILDER(max_rx_thres);
 
+static const char *dma_op_modes[] = {
+	"element", "threshold", "frame",
+};
+
 static ssize_t dma_op_mode_show(struct device *dev,
 			struct device_attribute *attr, char *buf)
 {
 	struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);
-	int dma_op_mode;
+	int dma_op_mode, i = 0;
+	ssize_t len = 0;
+	const char * const *s;
 
 	spin_lock_irq(&mcbsp->lock);
 	dma_op_mode = mcbsp->dma_op_mode;
 	spin_unlock_irq(&mcbsp->lock);
 
-	return sprintf(buf, "current mode: %d\n"
-			"possible mode values are:\n"
-			"%d - %s\n"
-			"%d - %s\n"
-			"%d - %s\n",
-			dma_op_mode,
-			MCBSP_DMA_MODE_ELEMENT, "element mode",
-			MCBSP_DMA_MODE_THRESHOLD, "threshold mode",
-			MCBSP_DMA_MODE_FRAME, "frame mode");
+	for (s = &dma_op_modes[i]; i < ARRAY_SIZE(dma_op_modes); s++, i++) {
+		if (dma_op_mode == i)
+			len += sprintf(buf + len, "[%s] ", *s);
+		else
+			len += sprintf(buf + len, "%s ", *s);
+	}
+	len += sprintf(buf + len, "\n");
+
+	return len;
 }
 
 static ssize_t dma_op_mode_store(struct device *dev,
@@ -1187,26 +1193,22 @@ static ssize_t dma_op_mode_store(struct device *dev,
 				const char *buf, size_t size)
 {
 	struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);
-	unsigned long val;
-	int status;
+	const char * const *s;
+	int i = 0;
 
-	status = strict_strtoul(buf, 0, &val);
-	if (status)
-		return status;
+	for (s = &dma_op_modes[i]; i < ARRAY_SIZE(dma_op_modes); s++, i++)
+		if (sysfs_streq(buf, *s))
+			break;
 
-	spin_lock_irq(&mcbsp->lock);
+	if (i == ARRAY_SIZE(dma_op_modes))
+		return -EINVAL;
 
+	spin_lock_irq(&mcbsp->lock);
 	if (!mcbsp->free) {
 		size = -EBUSY;
 		goto unlock;
 	}
-
-	if (val > MCBSP_DMA_MODE_FRAME || val < MCBSP_DMA_MODE_ELEMENT) {
-		size = -EINVAL;
-		goto unlock;
-	}
-
-	mcbsp->dma_op_mode = val;
+	mcbsp->dma_op_mode = i;
 
 unlock:
 	spin_unlock_irq(&mcbsp->lock);
-- 
cgit v1.2.3


From d09a2afc9359407114b7062519101f1ee2d05388 Mon Sep 17 00:00:00 2001
From: Jarkko Nikula <jhnikula@gmail.com>
Date: Sun, 23 Aug 2009 12:24:27 +0300
Subject: ARM: OMAP: McBSP: Merge two functions into omap_mcbsp_start/_stop

Functionality of functions omap_mcbsp_xmit_enable and omap_mcbsp_recv_enable
can be merged into omap_mcbsp_start and omap_mcbsp_stop since API of
those omap_mcbsp_start and omap_mcbsp_stop was changed recently allowing
to start and stop individually the transmitter and receiver.

This cleans up the code in arch/arm/plat-omap/mcbsp.c and in
sound/soc/omap/omap-mcbsp.c which was the only user for those removed
functions.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/plat-omap/include/mach/mcbsp.h |  2 -
 arch/arm/plat-omap/mcbsp.c              | 84 +++++++++++----------------------
 2 files changed, 28 insertions(+), 58 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index 70e950e295e..63a3f254af7 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -436,8 +436,6 @@ int omap_mcbsp_request(unsigned int id);
 void omap_mcbsp_free(unsigned int id);
 void omap_mcbsp_start(unsigned int id, int tx, int rx);
 void omap_mcbsp_stop(unsigned int id, int tx, int rx);
-void omap_mcbsp_xmit_enable(unsigned int id, u8 enable);
-void omap_mcbsp_recv_enable(unsigned int id, u8 enable);
 void omap_mcbsp_xmit_word(unsigned int id, u32 word);
 u32 omap_mcbsp_recv_word(unsigned int id);
 
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index ee60ab68251..8dc7927906f 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -529,11 +529,13 @@ void omap_mcbsp_start(unsigned int id, int tx, int rx)
 	}
 
 	/* Enable transmitter and receiver */
+	tx &= 1;
 	w = OMAP_MCBSP_READ(io_base, SPCR2);
-	OMAP_MCBSP_WRITE(io_base, SPCR2, w | (tx & 1));
+	OMAP_MCBSP_WRITE(io_base, SPCR2, w | tx);
 
+	rx &= 1;
 	w = OMAP_MCBSP_READ(io_base, SPCR1);
-	OMAP_MCBSP_WRITE(io_base, SPCR1, w | (rx & 1));
+	OMAP_MCBSP_WRITE(io_base, SPCR1, w | rx);
 
 	/*
 	 * Worst case: CLKSRG*2 = 8000khz: (1/8000) * 2 * 2 usec
@@ -549,6 +551,16 @@ void omap_mcbsp_start(unsigned int id, int tx, int rx)
 		OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 7));
 	}
 
+	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+		/* Release the transmitter and receiver */
+		w = OMAP_MCBSP_READ(io_base, XCCR);
+		w &= ~(tx ? XDISABLE : 0);
+		OMAP_MCBSP_WRITE(io_base, XCCR, w);
+		w = OMAP_MCBSP_READ(io_base, RCCR);
+		w &= ~(rx ? RDISABLE : 0);
+		OMAP_MCBSP_WRITE(io_base, RCCR, w);
+	}
+
 	/* Dump McBSP Regs */
 	omap_mcbsp_dump_reg(id);
 }
@@ -570,12 +582,24 @@ void omap_mcbsp_stop(unsigned int id, int tx, int rx)
 	io_base = mcbsp->io_base;
 
 	/* Reset transmitter */
+	tx &= 1;
+	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+		w = OMAP_MCBSP_READ(io_base, XCCR);
+		w |= (tx ? XDISABLE : 0);
+		OMAP_MCBSP_WRITE(io_base, XCCR, w);
+	}
 	w = OMAP_MCBSP_READ(io_base, SPCR2);
-	OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(tx & 1));
+	OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~tx);
 
 	/* Reset receiver */
+	rx &= 1;
+	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+		w = OMAP_MCBSP_READ(io_base, RCCR);
+		w |= (tx ? RDISABLE : 0);
+		OMAP_MCBSP_WRITE(io_base, RCCR, w);
+	}
 	w = OMAP_MCBSP_READ(io_base, SPCR1);
-	OMAP_MCBSP_WRITE(io_base, SPCR1, w & ~(rx & 1));
+	OMAP_MCBSP_WRITE(io_base, SPCR1, w & ~rx);
 
 	idle = !((OMAP_MCBSP_READ(io_base, SPCR2) |
 		  OMAP_MCBSP_READ(io_base, SPCR1)) & 1);
@@ -588,58 +612,6 @@ void omap_mcbsp_stop(unsigned int id, int tx, int rx)
 }
 EXPORT_SYMBOL(omap_mcbsp_stop);
 
-void omap_mcbsp_xmit_enable(unsigned int id, u8 enable)
-{
-	struct omap_mcbsp *mcbsp;
-	void __iomem *io_base;
-	u16 w;
-
-	if (!(cpu_is_omap2430() || cpu_is_omap34xx()))
-		return;
-
-	if (!omap_mcbsp_check_valid_id(id)) {
-		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
-		return;
-	}
-
-	mcbsp = id_to_mcbsp_ptr(id);
-	io_base = mcbsp->io_base;
-
-	w = OMAP_MCBSP_READ(io_base, XCCR);
-
-	if (enable)
-		OMAP_MCBSP_WRITE(io_base, XCCR, w & ~(XDISABLE));
-	else
-		OMAP_MCBSP_WRITE(io_base, XCCR, w | XDISABLE);
-}
-EXPORT_SYMBOL(omap_mcbsp_xmit_enable);
-
-void omap_mcbsp_recv_enable(unsigned int id, u8 enable)
-{
-	struct omap_mcbsp *mcbsp;
-	void __iomem *io_base;
-	u16 w;
-
-	if (!(cpu_is_omap2430() || cpu_is_omap34xx()))
-		return;
-
-	if (!omap_mcbsp_check_valid_id(id)) {
-		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
-		return;
-	}
-
-	mcbsp = id_to_mcbsp_ptr(id);
-	io_base = mcbsp->io_base;
-
-	w = OMAP_MCBSP_READ(io_base, RCCR);
-
-	if (enable)
-		OMAP_MCBSP_WRITE(io_base, RCCR, w & ~(RDISABLE));
-	else
-		OMAP_MCBSP_WRITE(io_base, RCCR, w | RDISABLE);
-}
-EXPORT_SYMBOL(omap_mcbsp_recv_enable);
-
 /* polled mcbsp i/o operations */
 int omap_mcbsp_pollwrite(unsigned int id, u16 buf)
 {
-- 
cgit v1.2.3


From 60902a2cb12c3c1682ee7a04ad7448ec16dc0c29 Mon Sep 17 00:00:00 2001
From: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Date: Thu, 21 May 2009 07:41:35 -0400
Subject: davinci: EDMA: multiple CCs, channel mapping and API changes

- restructure to support multiple channel controllers by using
  additional struct resources for each CC

- interface changes visible to EDMA clients

  Introduce macros to build IDs from controller and channel number,
  and to extract them. Modify the edma_alloc_slot function to take an
  extra argument for the controller.

  Also update ASoC drivers to use API.  ASoC changes
  Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

- Move queue related mappings to dm<soc>.c

  EDMA in DM355 and DM644x has two transfer controllers while DM646x
  has four transfer controllers. Moving the queue to tc mapping and
  queue priority mapping to dm<soc>.c will be helpful to probe these
  mappings from platform device so that the machine_is_* testing will
  be avoided.

- add channel mapping logic

  Channel mapping logic is introduced in dm646x EDMA. This implies
  that there is no fixed association for a channel number to a
  parameter entry number. In other words, using the DMA channel
  mapping registers (DCHMAPn), a PaRAM entry can be mapped to any
  channel. While in the case of dm644x and dm355 there is a fixed
  mapping between the EDMA channel and Param entry number.

Signed-off-by: Naresh Medisetty <naresh@ti.com>
Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Reviewed-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/devices.c           |   8 +-
 arch/arm/mach-davinci/dm355.c             |  41 +-
 arch/arm/mach-davinci/dm644x.c            |  41 +-
 arch/arm/mach-davinci/dm646x.c            |  46 +-
 arch/arm/mach-davinci/dma.c               | 811 +++++++++++++++++++-----------
 arch/arm/mach-davinci/include/mach/edma.h |   9 +-
 6 files changed, 635 insertions(+), 321 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index de16f347566..7a2f8ae89be 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -82,10 +82,10 @@ static struct resource mmcsd0_resources[] = {
 	},
 	/* DMA channels: RX, then TX */
 	{
-		.start = DAVINCI_DMA_MMCRXEVT,
+		.start = EDMA_CTLR_CHAN(0, DAVINCI_DMA_MMCRXEVT),
 		.flags = IORESOURCE_DMA,
 	}, {
-		.start = DAVINCI_DMA_MMCTXEVT,
+		.start = EDMA_CTLR_CHAN(0, DAVINCI_DMA_MMCTXEVT),
 		.flags = IORESOURCE_DMA,
 	},
 };
@@ -119,10 +119,10 @@ static struct resource mmcsd1_resources[] = {
 	},
 	/* DMA channels: RX, then TX */
 	{
-		.start = 30,	/* rx */
+		.start = EDMA_CTLR_CHAN(0, 30),	/* rx */
 		.flags = IORESOURCE_DMA,
 	}, {
-		.start = 31,	/* tx */
+		.start = EDMA_CTLR_CHAN(0, 31),	/* tx */
 		.flags = IORESOURCE_DMA,
 	},
 };
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index baaaf328de2..373f0c4003a 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -558,17 +558,38 @@ static const s8 dma_chan_dm355_no_event[] = {
 	-1
 };
 
-static struct edma_soc_info dm355_edma_info = {
-	.n_channel	= 64,
-	.n_region	= 4,
-	.n_slot		= 128,
-	.n_tc		= 2,
-	.noevent	= dma_chan_dm355_no_event,
+static const s8
+queue_tc_mapping[][2] = {
+	/* {event queue no, TC no} */
+	{0, 0},
+	{1, 1},
+	{-1, -1},
+};
+
+static const s8
+queue_priority_mapping[][2] = {
+	/* {event queue no, Priority} */
+	{0, 3},
+	{1, 7},
+	{-1, -1},
+};
+
+static struct edma_soc_info dm355_edma_info[] = {
+	{
+		.n_channel		= 64,
+		.n_region		= 4,
+		.n_slot			= 128,
+		.n_tc			= 2,
+		.n_cc			= 1,
+		.noevent		= dma_chan_dm355_no_event,
+		.queue_tc_mapping	= queue_tc_mapping,
+		.queue_priority_mapping	= queue_priority_mapping,
+	},
 };
 
 static struct resource edma_resources[] = {
 	{
-		.name	= "edma_cc",
+		.name	= "edma_cc0",
 		.start	= 0x01c00000,
 		.end	= 0x01c00000 + SZ_64K - 1,
 		.flags	= IORESOURCE_MEM,
@@ -586,10 +607,12 @@ static struct resource edma_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	{
+		.name	= "edma0",
 		.start	= IRQ_CCINT0,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
+		.name	= "edma0_err",
 		.start	= IRQ_CCERRINT,
 		.flags	= IORESOURCE_IRQ,
 	},
@@ -598,8 +621,8 @@ static struct resource edma_resources[] = {
 
 static struct platform_device dm355_edma_device = {
 	.name			= "edma",
-	.id			= -1,
-	.dev.platform_data	= &dm355_edma_info,
+	.id			= 0,
+	.dev.platform_data	= dm355_edma_info,
 	.num_resources		= ARRAY_SIZE(edma_resources),
 	.resource		= edma_resources,
 };
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index fb5449b3c97..d145c0cbfe6 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -484,17 +484,38 @@ static const s8 dma_chan_dm644x_no_event[] = {
 	-1
 };
 
-static struct edma_soc_info dm644x_edma_info = {
-	.n_channel	= 64,
-	.n_region	= 4,
-	.n_slot		= 128,
-	.n_tc		= 2,
-	.noevent	= dma_chan_dm644x_no_event,
+static const s8
+queue_tc_mapping[][2] = {
+	/* {event queue no, TC no} */
+	{0, 0},
+	{1, 1},
+	{-1, -1},
+};
+
+static const s8
+queue_priority_mapping[][2] = {
+	/* {event queue no, Priority} */
+	{0, 3},
+	{1, 7},
+	{-1, -1},
+};
+
+static struct edma_soc_info dm644x_edma_info[] = {
+	{
+		.n_channel		= 64,
+		.n_region		= 4,
+		.n_slot			= 128,
+		.n_tc			= 2,
+		.n_cc			= 1,
+		.noevent		= dma_chan_dm644x_no_event,
+		.queue_tc_mapping	= queue_tc_mapping,
+		.queue_priority_mapping	= queue_priority_mapping,
+	},
 };
 
 static struct resource edma_resources[] = {
 	{
-		.name	= "edma_cc",
+		.name	= "edma_cc0",
 		.start	= 0x01c00000,
 		.end	= 0x01c00000 + SZ_64K - 1,
 		.flags	= IORESOURCE_MEM,
@@ -512,10 +533,12 @@ static struct resource edma_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	{
+		.name	= "edma0",
 		.start	= IRQ_CCINT0,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
+		.name	= "edma0_err",
 		.start	= IRQ_CCERRINT,
 		.flags	= IORESOURCE_IRQ,
 	},
@@ -524,8 +547,8 @@ static struct resource edma_resources[] = {
 
 static struct platform_device dm644x_edma_device = {
 	.name			= "edma",
-	.id			= -1,
-	.dev.platform_data	= &dm644x_edma_info,
+	.id			= 0,
+	.dev.platform_data	= dm644x_edma_info,
 	.num_resources		= ARRAY_SIZE(edma_resources),
 	.resource		= edma_resources,
 };
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 334f0711e0f..e2410738327 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -451,17 +451,43 @@ static const s8 dma_chan_dm646x_no_event[] = {
 	-1
 };
 
-static struct edma_soc_info dm646x_edma_info = {
-	.n_channel	= 64,
-	.n_region	= 6,	/* 0-1, 4-7 */
-	.n_slot		= 512,
-	.n_tc		= 4,
-	.noevent	= dma_chan_dm646x_no_event,
+/* Four Transfer Controllers on DM646x */
+static const s8
+dm646x_queue_tc_mapping[][2] = {
+	/* {event queue no, TC no} */
+	{0, 0},
+	{1, 1},
+	{2, 2},
+	{3, 3},
+	{-1, -1},
+};
+
+static const s8
+dm646x_queue_priority_mapping[][2] = {
+	/* {event queue no, Priority} */
+	{0, 4},
+	{1, 0},
+	{2, 5},
+	{3, 1},
+	{-1, -1},
+};
+
+static struct edma_soc_info dm646x_edma_info[] = {
+	{
+		.n_channel		= 64,
+		.n_region		= 6,	/* 0-1, 4-7 */
+		.n_slot			= 512,
+		.n_tc			= 4,
+		.n_cc			= 1,
+		.noevent		= dma_chan_dm646x_no_event,
+		.queue_tc_mapping	= dm646x_queue_tc_mapping,
+		.queue_priority_mapping	= dm646x_queue_priority_mapping,
+	},
 };
 
 static struct resource edma_resources[] = {
 	{
-		.name	= "edma_cc",
+		.name	= "edma_cc0",
 		.start	= 0x01c00000,
 		.end	= 0x01c00000 + SZ_64K - 1,
 		.flags	= IORESOURCE_MEM,
@@ -491,10 +517,12 @@ static struct resource edma_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	{
+		.name	= "edma0",
 		.start	= IRQ_CCINT0,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
+		.name	= "edma0_err",
 		.start	= IRQ_CCERRINT,
 		.flags	= IORESOURCE_IRQ,
 	},
@@ -503,8 +531,8 @@ static struct resource edma_resources[] = {
 
 static struct platform_device dm646x_edma_device = {
 	.name			= "edma",
-	.id			= -1,
-	.dev.platform_data	= &dm646x_edma_info,
+	.id			= 0,
+	.dev.platform_data	= dm646x_edma_info,
 	.num_resources		= ARRAY_SIZE(edma_resources),
 	.resource		= edma_resources,
 };
diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c
index 15e9eb158bb..5908f7717b2 100644
--- a/arch/arm/mach-davinci/dma.c
+++ b/arch/arm/mach-davinci/dma.c
@@ -100,132 +100,157 @@
 #define EDMA_SHADOW0	0x2000	/* 4 regions shadowing global channels */
 #define EDMA_PARM	0x4000	/* 128 param entries */
 
-#define DAVINCI_DMA_3PCC_BASE	0x01C00000
-
 #define PARM_OFFSET(param_no)	(EDMA_PARM + ((param_no) << 5))
 
+#define EDMA_DCHMAP	0x0100  /* 64 registers */
+#define CHMAP_EXIST	BIT(24)
+
 #define EDMA_MAX_DMACH           64
 #define EDMA_MAX_PARAMENTRY     512
-#define EDMA_MAX_EVQUE            2	/* FIXME too small */
+#define EDMA_MAX_CC               2
 
 
 /*****************************************************************************/
 
-static void __iomem *edmacc_regs_base;
+static void __iomem *edmacc_regs_base[EDMA_MAX_CC];
 
-static inline unsigned int edma_read(int offset)
+static inline unsigned int edma_read(unsigned ctlr, int offset)
 {
-	return (unsigned int)__raw_readl(edmacc_regs_base + offset);
+	return (unsigned int)__raw_readl(edmacc_regs_base[ctlr] + offset);
 }
 
-static inline void edma_write(int offset, int val)
+static inline void edma_write(unsigned ctlr, int offset, int val)
 {
-	__raw_writel(val, edmacc_regs_base + offset);
+	__raw_writel(val, edmacc_regs_base[ctlr] + offset);
 }
-static inline void edma_modify(int offset, unsigned and, unsigned or)
+static inline void edma_modify(unsigned ctlr, int offset, unsigned and,
+		unsigned or)
 {
-	unsigned val = edma_read(offset);
+	unsigned val = edma_read(ctlr, offset);
 	val &= and;
 	val |= or;
-	edma_write(offset, val);
+	edma_write(ctlr, offset, val);
 }
-static inline void edma_and(int offset, unsigned and)
+static inline void edma_and(unsigned ctlr, int offset, unsigned and)
 {
-	unsigned val = edma_read(offset);
+	unsigned val = edma_read(ctlr, offset);
 	val &= and;
-	edma_write(offset, val);
+	edma_write(ctlr, offset, val);
 }
-static inline void edma_or(int offset, unsigned or)
+static inline void edma_or(unsigned ctlr, int offset, unsigned or)
 {
-	unsigned val = edma_read(offset);
+	unsigned val = edma_read(ctlr, offset);
 	val |= or;
-	edma_write(offset, val);
+	edma_write(ctlr, offset, val);
 }
-static inline unsigned int edma_read_array(int offset, int i)
+static inline unsigned int edma_read_array(unsigned ctlr, int offset, int i)
 {
-	return edma_read(offset + (i << 2));
+	return edma_read(ctlr, offset + (i << 2));
 }
-static inline void edma_write_array(int offset, int i, unsigned val)
+static inline void edma_write_array(unsigned ctlr, int offset, int i,
+		unsigned val)
 {
-	edma_write(offset + (i << 2), val);
+	edma_write(ctlr, offset + (i << 2), val);
 }
-static inline void edma_modify_array(int offset, int i,
+static inline void edma_modify_array(unsigned ctlr, int offset, int i,
 		unsigned and, unsigned or)
 {
-	edma_modify(offset + (i << 2), and, or);
+	edma_modify(ctlr, offset + (i << 2), and, or);
 }
-static inline void edma_or_array(int offset, int i, unsigned or)
+static inline void edma_or_array(unsigned ctlr, int offset, int i, unsigned or)
 {
-	edma_or(offset + (i << 2), or);
+	edma_or(ctlr, offset + (i << 2), or);
 }
-static inline void edma_or_array2(int offset, int i, int j, unsigned or)
+static inline void edma_or_array2(unsigned ctlr, int offset, int i, int j,
+		unsigned or)
 {
-	edma_or(offset + ((i*2 + j) << 2), or);
+	edma_or(ctlr, offset + ((i*2 + j) << 2), or);
 }
-static inline void edma_write_array2(int offset, int i, int j, unsigned val)
+static inline void edma_write_array2(unsigned ctlr, int offset, int i, int j,
+		unsigned val)
 {
-	edma_write(offset + ((i*2 + j) << 2), val);
+	edma_write(ctlr, offset + ((i*2 + j) << 2), val);
 }
-static inline unsigned int edma_shadow0_read(int offset)
+static inline unsigned int edma_shadow0_read(unsigned ctlr, int offset)
 {
-	return edma_read(EDMA_SHADOW0 + offset);
+	return edma_read(ctlr, EDMA_SHADOW0 + offset);
 }
-static inline unsigned int edma_shadow0_read_array(int offset, int i)
+static inline unsigned int edma_shadow0_read_array(unsigned ctlr, int offset,
+		int i)
 {
-	return edma_read(EDMA_SHADOW0 + offset + (i << 2));
+	return edma_read(ctlr, EDMA_SHADOW0 + offset + (i << 2));
 }
-static inline void edma_shadow0_write(int offset, unsigned val)
+static inline void edma_shadow0_write(unsigned ctlr, int offset, unsigned val)
 {
-	edma_write(EDMA_SHADOW0 + offset, val);
+	edma_write(ctlr, EDMA_SHADOW0 + offset, val);
 }
-static inline void edma_shadow0_write_array(int offset, int i, unsigned val)
+static inline void edma_shadow0_write_array(unsigned ctlr, int offset, int i,
+		unsigned val)
 {
-	edma_write(EDMA_SHADOW0 + offset + (i << 2), val);
+	edma_write(ctlr, EDMA_SHADOW0 + offset + (i << 2), val);
 }
-static inline unsigned int edma_parm_read(int offset, int param_no)
+static inline unsigned int edma_parm_read(unsigned ctlr, int offset,
+		int param_no)
 {
-	return edma_read(EDMA_PARM + offset + (param_no << 5));
+	return edma_read(ctlr, EDMA_PARM + offset + (param_no << 5));
 }
-static inline void edma_parm_write(int offset, int param_no, unsigned val)
+static inline void edma_parm_write(unsigned ctlr, int offset, int param_no,
+		unsigned val)
 {
-	edma_write(EDMA_PARM + offset + (param_no << 5), val);
+	edma_write(ctlr, EDMA_PARM + offset + (param_no << 5), val);
 }
-static inline void edma_parm_modify(int offset, int param_no,
+static inline void edma_parm_modify(unsigned ctlr, int offset, int param_no,
 		unsigned and, unsigned or)
 {
-	edma_modify(EDMA_PARM + offset + (param_no << 5), and, or);
+	edma_modify(ctlr, EDMA_PARM + offset + (param_no << 5), and, or);
 }
-static inline void edma_parm_and(int offset, int param_no, unsigned and)
+static inline void edma_parm_and(unsigned ctlr, int offset, int param_no,
+		unsigned and)
 {
-	edma_and(EDMA_PARM + offset + (param_no << 5), and);
+	edma_and(ctlr, EDMA_PARM + offset + (param_no << 5), and);
 }
-static inline void edma_parm_or(int offset, int param_no, unsigned or)
+static inline void edma_parm_or(unsigned ctlr, int offset, int param_no,
+		unsigned or)
 {
-	edma_or(EDMA_PARM + offset + (param_no << 5), or);
+	edma_or(ctlr, EDMA_PARM + offset + (param_no << 5), or);
 }
 
 /*****************************************************************************/
 
 /* actual number of DMA channels and slots on this silicon */
-static unsigned num_channels;
-static unsigned num_slots;
+struct edma {
+	/* how many dma resources of each type */
+	unsigned	num_channels;
+	unsigned	num_region;
+	unsigned	num_slots;
+	unsigned	num_tc;
+	unsigned	num_cc;
+
+	/* list of channels with no even trigger; terminated by "-1" */
+	const s8	*noevent;
+
+	/* The edma_inuse bit for each PaRAM slot is clear unless the
+	 * channel is in use ... by ARM or DSP, for QDMA, or whatever.
+	 */
+	DECLARE_BITMAP(edma_inuse, EDMA_MAX_PARAMENTRY);
 
-static struct dma_interrupt_data {
-	void (*callback)(unsigned channel, unsigned short ch_status,
-			 void *data);
-	void *data;
-} intr_data[EDMA_MAX_DMACH];
+	/* The edma_noevent bit for each channel is clear unless
+	 * it doesn't trigger DMA events on this platform.  It uses a
+	 * bit of SOC-specific initialization code.
+	 */
+	DECLARE_BITMAP(edma_noevent, EDMA_MAX_DMACH);
 
-/* The edma_inuse bit for each PaRAM slot is clear unless the
- * channel is in use ... by ARM or DSP, for QDMA, or whatever.
- */
-static DECLARE_BITMAP(edma_inuse, EDMA_MAX_PARAMENTRY);
+	unsigned	irq_res_start;
+	unsigned	irq_res_end;
 
-/* The edma_noevent bit for each channel is clear unless
- * it doesn't trigger DMA events on this platform.  It uses a
- * bit of SOC-specific initialization code.
- */
-static DECLARE_BITMAP(edma_noevent, EDMA_MAX_DMACH);
+	struct dma_interrupt_data {
+		void (*callback)(unsigned channel, unsigned short ch_status,
+				void *data);
+		void *data;
+	} intr_data[EDMA_MAX_DMACH];
+};
+
+static struct edma *edma_info[EDMA_MAX_CC];
 
 /* dummy param set used to (re)initialize parameter RAM slots */
 static const struct edmacc_param dummy_paramset = {
@@ -233,25 +258,10 @@ static const struct edmacc_param dummy_paramset = {
 	.ccnt = 1,
 };
 
-static const int __initconst
-queue_tc_mapping[EDMA_MAX_EVQUE + 1][2] = {
-/* {event queue no, TC no} */
-	{0, 0},
-	{1, 1},
-	{-1, -1}
-};
-
-static const int __initconst
-queue_priority_mapping[EDMA_MAX_EVQUE + 1][2] = {
-	/* {event queue no, Priority} */
-	{0, 3},
-	{1, 7},
-	{-1, -1}
-};
-
 /*****************************************************************************/
 
-static void map_dmach_queue(unsigned ch_no, enum dma_event_q queue_no)
+static void map_dmach_queue(unsigned ctlr, unsigned ch_no,
+		enum dma_event_q queue_no)
 {
 	int bit = (ch_no & 0x7) * 4;
 
@@ -260,20 +270,40 @@ static void map_dmach_queue(unsigned ch_no, enum dma_event_q queue_no)
 		queue_no = EVENTQ_1;
 
 	queue_no &= 7;
-	edma_modify_array(EDMA_DMAQNUM, (ch_no >> 3),
+	edma_modify_array(ctlr, EDMA_DMAQNUM, (ch_no >> 3),
 			~(0x7 << bit), queue_no << bit);
 }
 
-static void __init map_queue_tc(int queue_no, int tc_no)
+static void __init map_queue_tc(unsigned ctlr, int queue_no, int tc_no)
 {
 	int bit = queue_no * 4;
-	edma_modify(EDMA_QUETCMAP, ~(0x7 << bit), ((tc_no & 0x7) << bit));
+	edma_modify(ctlr, EDMA_QUETCMAP, ~(0x7 << bit), ((tc_no & 0x7) << bit));
 }
 
-static void __init assign_priority_to_queue(int queue_no, int priority)
+static void __init assign_priority_to_queue(unsigned ctlr, int queue_no,
+		int priority)
 {
 	int bit = queue_no * 4;
-	edma_modify(EDMA_QUEPRI, ~(0x7 << bit), ((priority & 0x7) << bit));
+	edma_modify(ctlr, EDMA_QUEPRI, ~(0x7 << bit),
+			((priority & 0x7) << bit));
+}
+
+/**
+ * map_dmach_param - Maps channel number to param entry number
+ *
+ * This maps the dma channel number to param entry numberter. In
+ * other words using the DMA channel mapping registers a param entry
+ * can be mapped to any channel
+ *
+ * Callers are responsible for ensuring the channel mapping logic is
+ * included in that particular EDMA variant (Eg : dm646x)
+ *
+ */
+static void __init map_dmach_param(unsigned ctlr)
+{
+	int i;
+	for (i = 0; i < EDMA_MAX_DMACH; i++)
+		edma_write_array(ctlr, EDMA_DCHMAP , i , (i << 5));
 }
 
 static inline void
@@ -281,22 +311,39 @@ setup_dma_interrupt(unsigned lch,
 	void (*callback)(unsigned channel, u16 ch_status, void *data),
 	void *data)
 {
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(lch);
+	lch = EDMA_CHAN_SLOT(lch);
+
 	if (!callback) {
-		edma_shadow0_write_array(SH_IECR, lch >> 5,
+		edma_shadow0_write_array(ctlr, SH_IECR, lch >> 5,
 				(1 << (lch & 0x1f)));
 	}
 
-	intr_data[lch].callback = callback;
-	intr_data[lch].data = data;
+	edma_info[ctlr]->intr_data[lch].callback = callback;
+	edma_info[ctlr]->intr_data[lch].data = data;
 
 	if (callback) {
-		edma_shadow0_write_array(SH_ICR, lch >> 5,
+		edma_shadow0_write_array(ctlr, SH_ICR, lch >> 5,
 				(1 << (lch & 0x1f)));
-		edma_shadow0_write_array(SH_IESR, lch >> 5,
+		edma_shadow0_write_array(ctlr, SH_IESR, lch >> 5,
 				(1 << (lch & 0x1f)));
 	}
 }
 
+static int irq2ctlr(int irq)
+{
+	if (irq >= edma_info[0]->irq_res_start &&
+		irq <= edma_info[0]->irq_res_end)
+		return 0;
+	else if (irq >= edma_info[1]->irq_res_start &&
+		irq <= edma_info[1]->irq_res_end)
+		return 1;
+
+	return -1;
+}
+
 /******************************************************************************
  *
  * DMA interrupt handler
@@ -305,32 +352,39 @@ setup_dma_interrupt(unsigned lch,
 static irqreturn_t dma_irq_handler(int irq, void *data)
 {
 	int i;
+	unsigned ctlr;
 	unsigned int cnt = 0;
 
+	ctlr = irq2ctlr(irq);
+
 	dev_dbg(data, "dma_irq_handler\n");
 
-	if ((edma_shadow0_read_array(SH_IPR, 0) == 0)
-	    && (edma_shadow0_read_array(SH_IPR, 1) == 0))
+	if ((edma_shadow0_read_array(ctlr, SH_IPR, 0) == 0)
+	    && (edma_shadow0_read_array(ctlr, SH_IPR, 1) == 0))
 		return IRQ_NONE;
 
 	while (1) {
 		int j;
-		if (edma_shadow0_read_array(SH_IPR, 0))
+		if (edma_shadow0_read_array(ctlr, SH_IPR, 0))
 			j = 0;
-		else if (edma_shadow0_read_array(SH_IPR, 1))
+		else if (edma_shadow0_read_array(ctlr, SH_IPR, 1))
 			j = 1;
 		else
 			break;
 		dev_dbg(data, "IPR%d %08x\n", j,
-				edma_shadow0_read_array(SH_IPR, j));
+				edma_shadow0_read_array(ctlr, SH_IPR, j));
 		for (i = 0; i < 32; i++) {
 			int k = (j << 5) + i;
-			if (edma_shadow0_read_array(SH_IPR, j) & (1 << i)) {
+			if (edma_shadow0_read_array(ctlr, SH_IPR, j) &
+							(1 << i)) {
 				/* Clear the corresponding IPR bits */
-				edma_shadow0_write_array(SH_ICR, j, (1 << i));
-				if (intr_data[k].callback) {
-					intr_data[k].callback(k, DMA_COMPLETE,
-						intr_data[k].data);
+				edma_shadow0_write_array(ctlr, SH_ICR, j,
+							(1 << i));
+				if (edma_info[ctlr]->intr_data[k].callback) {
+					edma_info[ctlr]->intr_data[k].callback(
+						k, DMA_COMPLETE,
+						edma_info[ctlr]->intr_data[k].
+						data);
 				}
 			}
 		}
@@ -338,7 +392,7 @@ static irqreturn_t dma_irq_handler(int irq, void *data)
 		if (cnt > 10)
 			break;
 	}
-	edma_shadow0_write(SH_IEVAL, 1);
+	edma_shadow0_write(ctlr, SH_IEVAL, 1);
 	return IRQ_HANDLED;
 }
 
@@ -350,78 +404,87 @@ static irqreturn_t dma_irq_handler(int irq, void *data)
 static irqreturn_t dma_ccerr_handler(int irq, void *data)
 {
 	int i;
+	unsigned ctlr;
 	unsigned int cnt = 0;
 
+	ctlr = irq2ctlr(irq);
+
 	dev_dbg(data, "dma_ccerr_handler\n");
 
-	if ((edma_read_array(EDMA_EMR, 0) == 0) &&
-	    (edma_read_array(EDMA_EMR, 1) == 0) &&
-	    (edma_read(EDMA_QEMR) == 0) && (edma_read(EDMA_CCERR) == 0))
+	if ((edma_read_array(ctlr, EDMA_EMR, 0) == 0) &&
+	    (edma_read_array(ctlr, EDMA_EMR, 1) == 0) &&
+	    (edma_read(ctlr, EDMA_QEMR) == 0) &&
+	    (edma_read(ctlr, EDMA_CCERR) == 0))
 		return IRQ_NONE;
 
 	while (1) {
 		int j = -1;
-		if (edma_read_array(EDMA_EMR, 0))
+		if (edma_read_array(ctlr, EDMA_EMR, 0))
 			j = 0;
-		else if (edma_read_array(EDMA_EMR, 1))
+		else if (edma_read_array(ctlr, EDMA_EMR, 1))
 			j = 1;
 		if (j >= 0) {
 			dev_dbg(data, "EMR%d %08x\n", j,
-					edma_read_array(EDMA_EMR, j));
+					edma_read_array(ctlr, EDMA_EMR, j));
 			for (i = 0; i < 32; i++) {
 				int k = (j << 5) + i;
-				if (edma_read_array(EDMA_EMR, j) & (1 << i)) {
+				if (edma_read_array(ctlr, EDMA_EMR, j) &
+							(1 << i)) {
 					/* Clear the corresponding EMR bits */
-					edma_write_array(EDMA_EMCR, j, 1 << i);
+					edma_write_array(ctlr, EDMA_EMCR, j,
+							1 << i);
 					/* Clear any SER */
-					edma_shadow0_write_array(SH_SECR, j,
-							(1 << i));
-					if (intr_data[k].callback) {
-						intr_data[k].callback(k,
-								DMA_CC_ERROR,
-								intr_data
-								[k].data);
+					edma_shadow0_write_array(ctlr, SH_SECR,
+								j, (1 << i));
+					if (edma_info[ctlr]->intr_data[k].
+								callback) {
+						edma_info[ctlr]->intr_data[k].
+						callback(k,
+						DMA_CC_ERROR,
+						edma_info[ctlr]->intr_data
+						[k].data);
 					}
 				}
 			}
-		} else if (edma_read(EDMA_QEMR)) {
+		} else if (edma_read(ctlr, EDMA_QEMR)) {
 			dev_dbg(data, "QEMR %02x\n",
-				edma_read(EDMA_QEMR));
+				edma_read(ctlr, EDMA_QEMR));
 			for (i = 0; i < 8; i++) {
-				if (edma_read(EDMA_QEMR) & (1 << i)) {
+				if (edma_read(ctlr, EDMA_QEMR) & (1 << i)) {
 					/* Clear the corresponding IPR bits */
-					edma_write(EDMA_QEMCR, 1 << i);
-					edma_shadow0_write(SH_QSECR, (1 << i));
+					edma_write(ctlr, EDMA_QEMCR, 1 << i);
+					edma_shadow0_write(ctlr, SH_QSECR,
+								(1 << i));
 
 					/* NOTE:  not reported!! */
 				}
 			}
-		} else if (edma_read(EDMA_CCERR)) {
+		} else if (edma_read(ctlr, EDMA_CCERR)) {
 			dev_dbg(data, "CCERR %08x\n",
-				edma_read(EDMA_CCERR));
+				edma_read(ctlr, EDMA_CCERR));
 			/* FIXME:  CCERR.BIT(16) ignored!  much better
 			 * to just write CCERRCLR with CCERR value...
 			 */
 			for (i = 0; i < 8; i++) {
-				if (edma_read(EDMA_CCERR) & (1 << i)) {
+				if (edma_read(ctlr, EDMA_CCERR) & (1 << i)) {
 					/* Clear the corresponding IPR bits */
-					edma_write(EDMA_CCERRCLR, 1 << i);
+					edma_write(ctlr, EDMA_CCERRCLR, 1 << i);
 
 					/* NOTE:  not reported!! */
 				}
 			}
 		}
-		if ((edma_read_array(EDMA_EMR, 0) == 0)
-		    && (edma_read_array(EDMA_EMR, 1) == 0)
-		    && (edma_read(EDMA_QEMR) == 0)
-		    && (edma_read(EDMA_CCERR) == 0)) {
+		if ((edma_read_array(ctlr, EDMA_EMR, 0) == 0)
+		    && (edma_read_array(ctlr, EDMA_EMR, 1) == 0)
+		    && (edma_read(ctlr, EDMA_QEMR) == 0)
+		    && (edma_read(ctlr, EDMA_CCERR) == 0)) {
 			break;
 		}
 		cnt++;
 		if (cnt > 10)
 			break;
 	}
-	edma_write(EDMA_EEVAL, 1);
+	edma_write(ctlr, EDMA_EEVAL, 1);
 	return IRQ_HANDLED;
 }
 
@@ -484,35 +547,53 @@ int edma_alloc_channel(int channel,
 		void *data,
 		enum dma_event_q eventq_no)
 {
+	unsigned i, done, ctlr = 0;
+
+	if (channel >= 0) {
+		ctlr = EDMA_CTLR(channel);
+		channel = EDMA_CHAN_SLOT(channel);
+	}
+
 	if (channel < 0) {
-		channel = 0;
-		for (;;) {
-			channel = find_next_bit(edma_noevent,
-					num_channels, channel);
-			if (channel == num_channels)
-				return -ENOMEM;
-			if (!test_and_set_bit(channel, edma_inuse))
+		for (i = 0; i < EDMA_MAX_CC; i++) {
+			channel = 0;
+			for (;;) {
+				channel = find_next_bit(edma_info[i]->
+						edma_noevent,
+						edma_info[i]->num_channels,
+						channel);
+				if (channel == edma_info[i]->num_channels)
+					return -ENOMEM;
+				if (!test_and_set_bit(channel,
+						edma_info[i]->edma_inuse)) {
+					done = 1;
+					ctlr = i;
+					break;
+				}
+				channel++;
+			}
+			if (done)
 				break;
-			channel++;
 		}
-	} else if (channel >= num_channels) {
+	} else if (channel >= edma_info[ctlr]->num_channels) {
 		return -EINVAL;
-	} else if (test_and_set_bit(channel, edma_inuse)) {
+	} else if (test_and_set_bit(channel, edma_info[ctlr]->edma_inuse)) {
 		return -EBUSY;
 	}
 
 	/* ensure access through shadow region 0 */
-	edma_or_array2(EDMA_DRAE, 0, channel >> 5, 1 << (channel & 0x1f));
+	edma_or_array2(ctlr, EDMA_DRAE, 0, channel >> 5, 1 << (channel & 0x1f));
 
 	/* ensure no events are pending */
-	edma_stop(channel);
-	memcpy_toio(edmacc_regs_base + PARM_OFFSET(channel),
+	edma_stop(EDMA_CTLR_CHAN(ctlr, channel));
+	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(channel),
 			&dummy_paramset, PARM_SIZE);
 
 	if (callback)
-		setup_dma_interrupt(channel, callback, data);
+		setup_dma_interrupt(EDMA_CTLR_CHAN(ctlr, channel),
+					callback, data);
 
-	map_dmach_queue(channel, eventq_no);
+	map_dmach_queue(ctlr, channel, eventq_no);
 
 	return channel;
 }
@@ -532,15 +613,20 @@ EXPORT_SYMBOL(edma_alloc_channel);
  */
 void edma_free_channel(unsigned channel)
 {
-	if (channel >= num_channels)
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(channel);
+	channel = EDMA_CHAN_SLOT(channel);
+
+	if (channel >= edma_info[ctlr]->num_channels)
 		return;
 
 	setup_dma_interrupt(channel, NULL, NULL);
 	/* REVISIT should probably take out of shadow region 0 */
 
-	memcpy_toio(edmacc_regs_base + PARM_OFFSET(channel),
+	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(channel),
 			&dummy_paramset, PARM_SIZE);
-	clear_bit(channel, edma_inuse);
+	clear_bit(channel, edma_info[ctlr]->edma_inuse);
 }
 EXPORT_SYMBOL(edma_free_channel);
 
@@ -558,28 +644,33 @@ EXPORT_SYMBOL(edma_free_channel);
  *
  * Returns the number of the slot, else negative errno.
  */
-int edma_alloc_slot(int slot)
+int edma_alloc_slot(unsigned ctlr, int slot)
 {
+	if (slot >= 0)
+		slot = EDMA_CHAN_SLOT(slot);
+
 	if (slot < 0) {
-		slot = num_channels;
+		slot = edma_info[ctlr]->num_channels;
 		for (;;) {
-			slot = find_next_zero_bit(edma_inuse,
-					num_slots, slot);
-			if (slot == num_slots)
+			slot = find_next_zero_bit(edma_info[ctlr]->edma_inuse,
+					edma_info[ctlr]->num_slots, slot);
+			if (slot == edma_info[ctlr]->num_slots)
 				return -ENOMEM;
-			if (!test_and_set_bit(slot, edma_inuse))
+			if (!test_and_set_bit(slot,
+						edma_info[ctlr]->edma_inuse))
 				break;
 		}
-	} else if (slot < num_channels || slot >= num_slots) {
+	} else if (slot < edma_info[ctlr]->num_channels ||
+			slot >= edma_info[ctlr]->num_slots) {
 		return -EINVAL;
-	} else if (test_and_set_bit(slot, edma_inuse)) {
+	} else if (test_and_set_bit(slot, edma_info[ctlr]->edma_inuse)) {
 		return -EBUSY;
 	}
 
-	memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot),
+	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
 			&dummy_paramset, PARM_SIZE);
 
-	return slot;
+	return EDMA_CTLR_CHAN(ctlr, slot);
 }
 EXPORT_SYMBOL(edma_alloc_slot);
 
@@ -593,12 +684,18 @@ EXPORT_SYMBOL(edma_alloc_slot);
  */
 void edma_free_slot(unsigned slot)
 {
-	if (slot < num_channels || slot >= num_slots)
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(slot);
+	slot = EDMA_CHAN_SLOT(slot);
+
+	if (slot < edma_info[ctlr]->num_channels ||
+		slot >= edma_info[ctlr]->num_slots)
 		return;
 
-	memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot),
+	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
 			&dummy_paramset, PARM_SIZE);
-	clear_bit(slot, edma_inuse);
+	clear_bit(slot, edma_info[ctlr]->edma_inuse);
 }
 EXPORT_SYMBOL(edma_free_slot);
 
@@ -620,8 +717,13 @@ EXPORT_SYMBOL(edma_free_slot);
 void edma_set_src(unsigned slot, dma_addr_t src_port,
 				enum address_mode mode, enum fifo_width width)
 {
-	if (slot < num_slots) {
-		unsigned int i = edma_parm_read(PARM_OPT, slot);
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(slot);
+	slot = EDMA_CHAN_SLOT(slot);
+
+	if (slot < edma_info[ctlr]->num_slots) {
+		unsigned int i = edma_parm_read(ctlr, PARM_OPT, slot);
 
 		if (mode) {
 			/* set SAM and program FWID */
@@ -630,11 +732,11 @@ void edma_set_src(unsigned slot, dma_addr_t src_port,
 			/* clear SAM */
 			i &= ~SAM;
 		}
-		edma_parm_write(PARM_OPT, slot, i);
+		edma_parm_write(ctlr, PARM_OPT, slot, i);
 
 		/* set the source port address
 		   in source register of param structure */
-		edma_parm_write(PARM_SRC, slot, src_port);
+		edma_parm_write(ctlr, PARM_SRC, slot, src_port);
 	}
 }
 EXPORT_SYMBOL(edma_set_src);
@@ -653,8 +755,13 @@ EXPORT_SYMBOL(edma_set_src);
 void edma_set_dest(unsigned slot, dma_addr_t dest_port,
 				 enum address_mode mode, enum fifo_width width)
 {
-	if (slot < num_slots) {
-		unsigned int i = edma_parm_read(PARM_OPT, slot);
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(slot);
+	slot = EDMA_CHAN_SLOT(slot);
+
+	if (slot < edma_info[ctlr]->num_slots) {
+		unsigned int i = edma_parm_read(ctlr, PARM_OPT, slot);
 
 		if (mode) {
 			/* set DAM and program FWID */
@@ -663,10 +770,10 @@ void edma_set_dest(unsigned slot, dma_addr_t dest_port,
 			/* clear DAM */
 			i &= ~DAM;
 		}
-		edma_parm_write(PARM_OPT, slot, i);
+		edma_parm_write(ctlr, PARM_OPT, slot, i);
 		/* set the destination port address
 		   in dest register of param structure */
-		edma_parm_write(PARM_DST, slot, dest_port);
+		edma_parm_write(ctlr, PARM_DST, slot, dest_port);
 	}
 }
 EXPORT_SYMBOL(edma_set_dest);
@@ -683,8 +790,12 @@ EXPORT_SYMBOL(edma_set_dest);
 void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst)
 {
 	struct edmacc_param temp;
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(slot);
+	slot = EDMA_CHAN_SLOT(slot);
 
-	edma_read_slot(slot, &temp);
+	edma_read_slot(EDMA_CTLR_CHAN(ctlr, slot), &temp);
 	if (src != NULL)
 		*src = temp.src;
 	if (dst != NULL)
@@ -704,10 +815,15 @@ EXPORT_SYMBOL(edma_get_position);
  */
 void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx)
 {
-	if (slot < num_slots) {
-		edma_parm_modify(PARM_SRC_DST_BIDX, slot,
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(slot);
+	slot = EDMA_CHAN_SLOT(slot);
+
+	if (slot < edma_info[ctlr]->num_slots) {
+		edma_parm_modify(ctlr, PARM_SRC_DST_BIDX, slot,
 				0xffff0000, src_bidx);
-		edma_parm_modify(PARM_SRC_DST_CIDX, slot,
+		edma_parm_modify(ctlr, PARM_SRC_DST_CIDX, slot,
 				0xffff0000, src_cidx);
 	}
 }
@@ -725,10 +841,15 @@ EXPORT_SYMBOL(edma_set_src_index);
  */
 void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx)
 {
-	if (slot < num_slots) {
-		edma_parm_modify(PARM_SRC_DST_BIDX, slot,
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(slot);
+	slot = EDMA_CHAN_SLOT(slot);
+
+	if (slot < edma_info[ctlr]->num_slots) {
+		edma_parm_modify(ctlr, PARM_SRC_DST_BIDX, slot,
 				0x0000ffff, dest_bidx << 16);
-		edma_parm_modify(PARM_SRC_DST_CIDX, slot,
+		edma_parm_modify(ctlr, PARM_SRC_DST_CIDX, slot,
 				0x0000ffff, dest_cidx << 16);
 	}
 }
@@ -767,16 +888,21 @@ void edma_set_transfer_params(unsigned slot,
 		u16 acnt, u16 bcnt, u16 ccnt,
 		u16 bcnt_rld, enum sync_dimension sync_mode)
 {
-	if (slot < num_slots) {
-		edma_parm_modify(PARM_LINK_BCNTRLD, slot,
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(slot);
+	slot = EDMA_CHAN_SLOT(slot);
+
+	if (slot < edma_info[ctlr]->num_slots) {
+		edma_parm_modify(ctlr, PARM_LINK_BCNTRLD, slot,
 				0x0000ffff, bcnt_rld << 16);
 		if (sync_mode == ASYNC)
-			edma_parm_and(PARM_OPT, slot, ~SYNCDIM);
+			edma_parm_and(ctlr, PARM_OPT, slot, ~SYNCDIM);
 		else
-			edma_parm_or(PARM_OPT, slot, SYNCDIM);
+			edma_parm_or(ctlr, PARM_OPT, slot, SYNCDIM);
 		/* Set the acount, bcount, ccount registers */
-		edma_parm_write(PARM_A_B_CNT, slot, (bcnt << 16) | acnt);
-		edma_parm_write(PARM_CCNT, slot, ccnt);
+		edma_parm_write(ctlr, PARM_A_B_CNT, slot, (bcnt << 16) | acnt);
+		edma_parm_write(ctlr, PARM_CCNT, slot, ccnt);
 	}
 }
 EXPORT_SYMBOL(edma_set_transfer_params);
@@ -790,11 +916,19 @@ EXPORT_SYMBOL(edma_set_transfer_params);
  */
 void edma_link(unsigned from, unsigned to)
 {
-	if (from >= num_slots)
+	unsigned ctlr_from, ctlr_to;
+
+	ctlr_from = EDMA_CTLR(from);
+	from = EDMA_CHAN_SLOT(from);
+	ctlr_to = EDMA_CTLR(to);
+	to = EDMA_CHAN_SLOT(to);
+
+	if (from >= edma_info[ctlr_from]->num_slots)
 		return;
-	if (to >= num_slots)
+	if (to >= edma_info[ctlr_to]->num_slots)
 		return;
-	edma_parm_modify(PARM_LINK_BCNTRLD, from, 0xffff0000, PARM_OFFSET(to));
+	edma_parm_modify(ctlr_from, PARM_LINK_BCNTRLD, from, 0xffff0000,
+				PARM_OFFSET(to));
 }
 EXPORT_SYMBOL(edma_link);
 
@@ -807,9 +941,14 @@ EXPORT_SYMBOL(edma_link);
  */
 void edma_unlink(unsigned from)
 {
-	if (from >= num_slots)
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(from);
+	from = EDMA_CHAN_SLOT(from);
+
+	if (from >= edma_info[ctlr]->num_slots)
 		return;
-	edma_parm_or(PARM_LINK_BCNTRLD, from, 0xffff);
+	edma_parm_or(ctlr, PARM_LINK_BCNTRLD, from, 0xffff);
 }
 EXPORT_SYMBOL(edma_unlink);
 
@@ -829,9 +968,15 @@ EXPORT_SYMBOL(edma_unlink);
  */
 void edma_write_slot(unsigned slot, const struct edmacc_param *param)
 {
-	if (slot >= num_slots)
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(slot);
+	slot = EDMA_CHAN_SLOT(slot);
+
+	if (slot >= edma_info[ctlr]->num_slots)
 		return;
-	memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot), param, PARM_SIZE);
+	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot), param,
+			PARM_SIZE);
 }
 EXPORT_SYMBOL(edma_write_slot);
 
@@ -845,9 +990,15 @@ EXPORT_SYMBOL(edma_write_slot);
  */
 void edma_read_slot(unsigned slot, struct edmacc_param *param)
 {
-	if (slot >= num_slots)
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(slot);
+	slot = EDMA_CHAN_SLOT(slot);
+
+	if (slot >= edma_info[ctlr]->num_slots)
 		return;
-	memcpy_fromio(param, edmacc_regs_base + PARM_OFFSET(slot), PARM_SIZE);
+	memcpy_fromio(param, edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
+			PARM_SIZE);
 }
 EXPORT_SYMBOL(edma_read_slot);
 
@@ -864,10 +1015,15 @@ EXPORT_SYMBOL(edma_read_slot);
  */
 void edma_pause(unsigned channel)
 {
-	if (channel < num_channels) {
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(channel);
+	channel = EDMA_CHAN_SLOT(channel);
+
+	if (channel < edma_info[ctlr]->num_channels) {
 		unsigned int mask = (1 << (channel & 0x1f));
 
-		edma_shadow0_write_array(SH_EECR, channel >> 5, mask);
+		edma_shadow0_write_array(ctlr, SH_EECR, channel >> 5, mask);
 	}
 }
 EXPORT_SYMBOL(edma_pause);
@@ -880,10 +1036,15 @@ EXPORT_SYMBOL(edma_pause);
  */
 void edma_resume(unsigned channel)
 {
-	if (channel < num_channels) {
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(channel);
+	channel = EDMA_CHAN_SLOT(channel);
+
+	if (channel < edma_info[ctlr]->num_channels) {
 		unsigned int mask = (1 << (channel & 0x1f));
 
-		edma_shadow0_write_array(SH_EESR, channel >> 5, mask);
+		edma_shadow0_write_array(ctlr, SH_EESR, channel >> 5, mask);
 	}
 }
 EXPORT_SYMBOL(edma_resume);
@@ -901,28 +1062,33 @@ EXPORT_SYMBOL(edma_resume);
  */
 int edma_start(unsigned channel)
 {
-	if (channel < num_channels) {
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(channel);
+	channel = EDMA_CHAN_SLOT(channel);
+
+	if (channel < edma_info[ctlr]->num_channels) {
 		int j = channel >> 5;
 		unsigned int mask = (1 << (channel & 0x1f));
 
 		/* EDMA channels without event association */
-		if (test_bit(channel, edma_noevent)) {
+		if (test_bit(channel, edma_info[ctlr]->edma_noevent)) {
 			pr_debug("EDMA: ESR%d %08x\n", j,
-				edma_shadow0_read_array(SH_ESR, j));
-			edma_shadow0_write_array(SH_ESR, j, mask);
+				edma_shadow0_read_array(ctlr, SH_ESR, j));
+			edma_shadow0_write_array(ctlr, SH_ESR, j, mask);
 			return 0;
 		}
 
 		/* EDMA channel with event association */
 		pr_debug("EDMA: ER%d %08x\n", j,
-			edma_shadow0_read_array(SH_ER, j));
+			edma_shadow0_read_array(ctlr, SH_ER, j));
 		/* Clear any pending error */
-		edma_write_array(EDMA_EMCR, j, mask);
+		edma_write_array(ctlr, EDMA_EMCR, j, mask);
 		/* Clear any SER */
-		edma_shadow0_write_array(SH_SECR, j, mask);
-		edma_shadow0_write_array(SH_EESR, j, mask);
+		edma_shadow0_write_array(ctlr, SH_SECR, j, mask);
+		edma_shadow0_write_array(ctlr, SH_EESR, j, mask);
 		pr_debug("EDMA: EER%d %08x\n", j,
-			edma_shadow0_read_array(SH_EER, j));
+			edma_shadow0_read_array(ctlr, SH_EER, j));
 		return 0;
 	}
 
@@ -941,17 +1107,22 @@ EXPORT_SYMBOL(edma_start);
  */
 void edma_stop(unsigned channel)
 {
-	if (channel < num_channels) {
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(channel);
+	channel = EDMA_CHAN_SLOT(channel);
+
+	if (channel < edma_info[ctlr]->num_channels) {
 		int j = channel >> 5;
 		unsigned int mask = (1 << (channel & 0x1f));
 
-		edma_shadow0_write_array(SH_EECR, j, mask);
-		edma_shadow0_write_array(SH_ECR, j, mask);
-		edma_shadow0_write_array(SH_SECR, j, mask);
-		edma_write_array(EDMA_EMCR, j, mask);
+		edma_shadow0_write_array(ctlr, SH_EECR, j, mask);
+		edma_shadow0_write_array(ctlr, SH_ECR, j, mask);
+		edma_shadow0_write_array(ctlr, SH_SECR, j, mask);
+		edma_write_array(ctlr, EDMA_EMCR, j, mask);
 
 		pr_debug("EDMA: EER%d %08x\n", j,
-				edma_shadow0_read_array(SH_EER, j));
+				edma_shadow0_read_array(ctlr, SH_EER, j));
 
 		/* REVISIT:  consider guarding against inappropriate event
 		 * chaining by overwriting with dummy_paramset.
@@ -975,18 +1146,23 @@ EXPORT_SYMBOL(edma_stop);
 
 void edma_clean_channel(unsigned channel)
 {
-	if (channel < num_channels) {
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(channel);
+	channel = EDMA_CHAN_SLOT(channel);
+
+	if (channel < edma_info[ctlr]->num_channels) {
 		int j = (channel >> 5);
 		unsigned int mask = 1 << (channel & 0x1f);
 
 		pr_debug("EDMA: EMR%d %08x\n", j,
-				edma_read_array(EDMA_EMR, j));
-		edma_shadow0_write_array(SH_ECR, j, mask);
+				edma_read_array(ctlr, EDMA_EMR, j));
+		edma_shadow0_write_array(ctlr, SH_ECR, j, mask);
 		/* Clear the corresponding EMR bits */
-		edma_write_array(EDMA_EMCR, j, mask);
+		edma_write_array(ctlr, EDMA_EMCR, j, mask);
 		/* Clear any SER */
-		edma_shadow0_write_array(SH_SECR, j, mask);
-		edma_write(EDMA_CCERRCLR, (1 << 16) | 0x3);
+		edma_shadow0_write_array(ctlr, SH_SECR, j, mask);
+		edma_write(ctlr, EDMA_CCERRCLR, (1 << 16) | 0x3);
 	}
 }
 EXPORT_SYMBOL(edma_clean_channel);
@@ -998,12 +1174,17 @@ EXPORT_SYMBOL(edma_clean_channel);
  */
 void edma_clear_event(unsigned channel)
 {
-	if (channel >= num_channels)
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(channel);
+	channel = EDMA_CHAN_SLOT(channel);
+
+	if (channel >= edma_info[ctlr]->num_channels)
 		return;
 	if (channel < 32)
-		edma_write(EDMA_ECR, 1 << channel);
+		edma_write(ctlr, EDMA_ECR, 1 << channel);
 	else
-		edma_write(EDMA_ECRH, 1 << (channel - 32));
+		edma_write(ctlr, EDMA_ECRH, 1 << (channel - 32));
 }
 EXPORT_SYMBOL(edma_clear_event);
 
@@ -1012,62 +1193,129 @@ EXPORT_SYMBOL(edma_clear_event);
 static int __init edma_probe(struct platform_device *pdev)
 {
 	struct edma_soc_info	*info = pdev->dev.platform_data;
-	int			i;
-	int			status;
+	const s8		(*queue_priority_mapping)[2];
+	const s8		(*queue_tc_mapping)[2];
+	int			i, j, found = 0;
+	int			status = -1;
 	const s8		*noevent;
-	int			irq = 0, err_irq = 0;
-	struct resource		*r;
-	resource_size_t		len;
+	int			irq[EDMA_MAX_CC] = {0, 0};
+	int			err_irq[EDMA_MAX_CC] = {0, 0};
+	struct resource		*r[EDMA_MAX_CC] = {NULL};
+	resource_size_t		len[EDMA_MAX_CC];
+	char			res_name[10];
+	char			irq_name[10];
 
 	if (!info)
 		return -ENODEV;
 
-	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "edma_cc");
-	if (!r)
-		return -ENODEV;
+	for (j = 0; j < EDMA_MAX_CC; j++) {
+		sprintf(res_name, "edma_cc%d", j);
+		r[j] = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+						res_name);
+		if (!r[j]) {
+			if (found)
+				break;
+			else
+				return -ENODEV;
+		} else
+			found = 1;
+
+		len[j] = resource_size(r[j]);
+
+		r[j] = request_mem_region(r[j]->start, len[j],
+			dev_name(&pdev->dev));
+		if (!r[j]) {
+			status = -EBUSY;
+			goto fail1;
+		}
 
-	len = r->end - r->start + 1;
+		edmacc_regs_base[j] = ioremap(r[j]->start, len[j]);
+		if (!edmacc_regs_base[j]) {
+			status = -EBUSY;
+			goto fail1;
+		}
 
-	r = request_mem_region(r->start, len, r->name);
-	if (!r)
-		return -EBUSY;
+		edma_info[j] = kmalloc(sizeof(struct edma), GFP_KERNEL);
+		if (!edma_info[j]) {
+			status = -ENOMEM;
+			goto fail1;
+		}
+		memset(edma_info[j], 0, sizeof(struct edma));
+
+		edma_info[j]->num_channels = min_t(unsigned, info[j].n_channel,
+							EDMA_MAX_DMACH);
+		edma_info[j]->num_slots = min_t(unsigned, info[j].n_slot,
+							EDMA_MAX_PARAMENTRY);
+		edma_info[j]->num_cc = min_t(unsigned, info[j].n_cc,
+							EDMA_MAX_CC);
+
+		dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n",
+			edmacc_regs_base[j]);
+
+		for (i = 0; i < edma_info[j]->num_slots; i++)
+			memcpy_toio(edmacc_regs_base[j] + PARM_OFFSET(i),
+					&dummy_paramset, PARM_SIZE);
+
+		noevent = info[j].noevent;
+		if (noevent) {
+			while (*noevent != -1)
+				set_bit(*noevent++, edma_info[j]->edma_noevent);
+		}
 
-	edmacc_regs_base = ioremap(r->start, len);
-	if (!edmacc_regs_base) {
-		status = -EBUSY;
-		goto fail1;
-	}
+		sprintf(irq_name, "edma%d", j);
+		irq[j] = platform_get_irq_byname(pdev, irq_name);
+		edma_info[j]->irq_res_start = irq[j];
+		status = request_irq(irq[j], dma_irq_handler, 0, "edma",
+					&pdev->dev);
+		if (status < 0) {
+			dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
+				irq[j], status);
+			goto fail;
+		}
 
-	num_channels = min_t(unsigned, info->n_channel, EDMA_MAX_DMACH);
-	num_slots = min_t(unsigned, info->n_slot, EDMA_MAX_PARAMENTRY);
+		sprintf(irq_name, "edma%d_err", j);
+		err_irq[j] = platform_get_irq_byname(pdev, irq_name);
+		edma_info[j]->irq_res_end = err_irq[j];
+		status = request_irq(err_irq[j], dma_ccerr_handler, 0,
+					"edma_error", &pdev->dev);
+		if (status < 0) {
+			dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
+				err_irq[j], status);
+			goto fail;
+		}
 
-	dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n", edmacc_regs_base);
+		/* Everything lives on transfer controller 1 until otherwise
+		 * specified. This way, long transfers on the low priority queue
+		 * started by the codec engine will not cause audio defects.
+		 */
+		for (i = 0; i < edma_info[j]->num_channels; i++)
+			map_dmach_queue(j, i, EVENTQ_1);
 
-	for (i = 0; i < num_slots; i++)
-		memcpy_toio(edmacc_regs_base + PARM_OFFSET(i),
-				&dummy_paramset, PARM_SIZE);
+		queue_tc_mapping = info[j].queue_tc_mapping;
+		queue_priority_mapping = info[j].queue_priority_mapping;
 
-	noevent = info->noevent;
-	if (noevent) {
-		while (*noevent != -1)
-			set_bit(*noevent++, edma_noevent);
-	}
+		/* Event queue to TC mapping */
+		for (i = 0; queue_tc_mapping[i][0] != -1; i++)
+			map_queue_tc(j, queue_tc_mapping[i][0],
+					queue_tc_mapping[i][1]);
 
-	irq = platform_get_irq(pdev, 0);
-	status = request_irq(irq, dma_irq_handler, 0, "edma", &pdev->dev);
-	if (status < 0) {
-		dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
-			irq, status);
-		goto fail;
-	}
+		/* Event queue priority mapping */
+		for (i = 0; queue_priority_mapping[i][0] != -1; i++)
+			assign_priority_to_queue(j,
+						queue_priority_mapping[i][0],
+						queue_priority_mapping[i][1]);
+
+		/* Map the channel to param entry if channel mapping logic
+		 * exist
+		 */
+		if (edma_read(j, EDMA_CCCFG) & CHMAP_EXIST)
+			map_dmach_param(j);
 
-	err_irq = platform_get_irq(pdev, 1);
-	status = request_irq(err_irq, dma_ccerr_handler, 0,
-				"edma_error", &pdev->dev);
-	if (status < 0) {
-		dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
-			err_irq, status);
-		goto fail;
+		for (i = 0; i < info[j].n_region; i++) {
+			edma_write_array2(j, EDMA_DRAE, i, 0, 0x0);
+			edma_write_array2(j, EDMA_DRAE, i, 1, 0x0);
+			edma_write_array(j, EDMA_QRAE, i, 0x0);
+		}
 	}
 
 	if (tc_errs_handled) {
@@ -1087,38 +1335,23 @@ static int __init edma_probe(struct platform_device *pdev)
 		}
 	}
 
-	/* Everything lives on transfer controller 1 until otherwise specified.
-	 * This way, long transfers on the low priority queue
-	 * started by the codec engine will not cause audio defects.
-	 */
-	for (i = 0; i < num_channels; i++)
-		map_dmach_queue(i, EVENTQ_1);
-
-	/* Event queue to TC mapping */
-	for (i = 0; queue_tc_mapping[i][0] != -1; i++)
-		map_queue_tc(queue_tc_mapping[i][0], queue_tc_mapping[i][1]);
-
-	/* Event queue priority mapping */
-	for (i = 0; queue_priority_mapping[i][0] != -1; i++)
-		assign_priority_to_queue(queue_priority_mapping[i][0],
-					 queue_priority_mapping[i][1]);
-
-	for (i = 0; i < info->n_region; i++) {
-		edma_write_array2(EDMA_DRAE, i, 0, 0x0);
-		edma_write_array2(EDMA_DRAE, i, 1, 0x0);
-		edma_write_array(EDMA_QRAE, i, 0x0);
-	}
-
 	return 0;
 
 fail:
-	if (err_irq)
-		free_irq(err_irq, NULL);
-	if (irq)
-		free_irq(irq, NULL);
-	iounmap(edmacc_regs_base);
+	for (i = 0; i < EDMA_MAX_CC; i++) {
+		if (err_irq[i])
+			free_irq(err_irq[i], &pdev->dev);
+		if (irq[i])
+			free_irq(irq[i], &pdev->dev);
+	}
 fail1:
-	release_mem_region(r->start, len);
+	for (i = 0; i < EDMA_MAX_CC; i++) {
+		if (r[i])
+			release_mem_region(r[i]->start, len[i]);
+		if (edmacc_regs_base[i])
+			iounmap(edmacc_regs_base[i]);
+		kfree(edma_info[i]);
+	}
 	return status;
 }
 
diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h
index 24a379239d7..ba2ebdd058a 100644
--- a/arch/arm/mach-davinci/include/mach/edma.h
+++ b/arch/arm/mach-davinci/include/mach/edma.h
@@ -170,6 +170,10 @@ enum sync_dimension {
 	ABSYNC = 1
 };
 
+#define EDMA_CTLR_CHAN(ctlr, chan)	(((ctlr) << 16) | (chan))
+#define EDMA_CTLR(i)			((i) >> 16)
+#define EDMA_CHAN_SLOT(i)		((i) & 0xffff)
+
 #define EDMA_CHANNEL_ANY		-1	/* for edma_alloc_channel() */
 #define EDMA_SLOT_ANY			-1	/* for edma_alloc_slot() */
 
@@ -180,7 +184,7 @@ int edma_alloc_channel(int channel,
 void edma_free_channel(unsigned channel);
 
 /* alloc/free parameter RAM slots */
-int edma_alloc_slot(int slot);
+int edma_alloc_slot(unsigned ctlr, int slot);
 void edma_free_slot(unsigned slot);
 
 /* calls that operate on part of a parameter RAM slot */
@@ -216,9 +220,12 @@ struct edma_soc_info {
 	unsigned	n_region;
 	unsigned	n_slot;
 	unsigned	n_tc;
+	unsigned	n_cc;
 
 	/* list of channels with no even trigger; terminated by "-1" */
 	const s8	*noevent;
+	const s8	(*queue_tc_mapping)[2];
+	const s8	(*queue_priority_mapping)[2];
 };
 
 #endif
-- 
cgit v1.2.3


From 2bcb613a7919a0a6a7a00408fbfd1c8e471fe060 Mon Sep 17 00:00:00 2001
From: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Date: Tue, 2 Jun 2009 03:38:26 -0400
Subject: davinci: EDMA: add support for dm646x

Enables module clock for DM646x EDMA channel controller and transfer
controller.

Signed-off-by: Naresh Medisetty <naresh@ti.com>
Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/dm646x.c | 40 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index e2410738327..19e989db6f7 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -162,6 +162,41 @@ static struct clk arm_clk = {
 	.flags = ALWAYS_ENABLED,
 };
 
+static struct clk edma_cc_clk = {
+	.name = "edma_cc",
+	.parent = &pll1_sysclk2,
+	.lpsc = DM646X_LPSC_TPCC,
+	.flags = ALWAYS_ENABLED,
+};
+
+static struct clk edma_tc0_clk = {
+	.name = "edma_tc0",
+	.parent = &pll1_sysclk2,
+	.lpsc = DM646X_LPSC_TPTC0,
+	.flags = ALWAYS_ENABLED,
+};
+
+static struct clk edma_tc1_clk = {
+	.name = "edma_tc1",
+	.parent = &pll1_sysclk2,
+	.lpsc = DM646X_LPSC_TPTC1,
+	.flags = ALWAYS_ENABLED,
+};
+
+static struct clk edma_tc2_clk = {
+	.name = "edma_tc2",
+	.parent = &pll1_sysclk2,
+	.lpsc = DM646X_LPSC_TPTC2,
+	.flags = ALWAYS_ENABLED,
+};
+
+static struct clk edma_tc3_clk = {
+	.name = "edma_tc3",
+	.parent = &pll1_sysclk2,
+	.lpsc = DM646X_LPSC_TPTC3,
+	.flags = ALWAYS_ENABLED,
+};
+
 static struct clk uart0_clk = {
 	.name = "uart0",
 	.parent = &aux_clkin,
@@ -269,6 +304,11 @@ struct davinci_clk dm646x_clks[] = {
 	CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
 	CLK(NULL, "dsp", &dsp_clk),
 	CLK(NULL, "arm", &arm_clk),
+	CLK(NULL, "edma_cc", &edma_cc_clk),
+	CLK(NULL, "edma_tc0", &edma_tc0_clk),
+	CLK(NULL, "edma_tc1", &edma_tc1_clk),
+	CLK(NULL, "edma_tc2", &edma_tc2_clk),
+	CLK(NULL, "edma_tc3", &edma_tc3_clk),
 	CLK(NULL, "uart0", &uart0_clk),
 	CLK(NULL, "uart1", &uart1_clk),
 	CLK(NULL, "uart2", &uart2_clk),
-- 
cgit v1.2.3


From 75d0fa70e748629b786c25530f7c5ae76587da35 Mon Sep 17 00:00:00 2001
From: Chaithrika U S <chaithrika@ti.com>
Date: Thu, 28 May 2009 05:09:21 -0400
Subject: davinci: dm646x: Adds McASP clock

Adds McASP clock support for the two instances of mcasp (mcasp0,mcasp1). This
patch is part of the audio support for dm646x series.

Signed-off-by: Naresh Medisetty <naresh@ti.com>
Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/dm646x.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 19e989db6f7..1391513b738 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -227,6 +227,18 @@ static struct clk gpio_clk = {
 	.lpsc = DM646X_LPSC_GPIO,
 };
 
+static struct clk mcasp0_clk = {
+	.name = "mcasp0",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM646X_LPSC_McASP0,
+};
+
+static struct clk mcasp1_clk = {
+	.name = "mcasp1",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM646X_LPSC_McASP1,
+};
+
 static struct clk aemif_clk = {
 	.name = "aemif",
 	.parent = &pll1_sysclk3,
@@ -314,6 +326,8 @@ struct davinci_clk dm646x_clks[] = {
 	CLK(NULL, "uart2", &uart2_clk),
 	CLK("i2c_davinci.1", NULL, &i2c_clk),
 	CLK(NULL, "gpio", &gpio_clk),
+	CLK(NULL, "mcasp0", &mcasp0_clk),
+	CLK(NULL, "mcasp1", &mcasp1_clk),
 	CLK(NULL, "aemif", &aemif_clk),
 	CLK("davinci_emac.1", NULL, &emac_clk),
 	CLK(NULL, "pwm0", &pwm0_clk),
-- 
cgit v1.2.3


From a23f7dc82d48d7fc8377765f6ede907daef4e63b Mon Sep 17 00:00:00 2001
From: David Griego <dgriego@mvista.com>
Date: Mon, 1 Jun 2009 11:41:54 -0700
Subject: davinci: Fix watchdog reset code

The davinci reset routine, davinci_watchdog_reset(), sets the
TCR register instead of the TGCR register as it should to put
the WDT into its "Initial State".

It also writes the WDTCR register without the proper WDKEY
which is pointless since the register will be write-protected.

Signed-off-by: David Griego <dgriego@mvista.com>
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/time.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 0884ca57bfb..ca85d187176 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -420,11 +420,11 @@ void davinci_watchdog_reset(void)
 
 	/* reset timer, set mode to 64-bit watchdog, and unreset */
 	tgcr = 0;
-	__raw_writel(tgcr, base + TCR);
+	__raw_writel(tgcr, base + TGCR);
 	tgcr = TGCR_TIMMODE_64BIT_WDOG << TGCR_TIMMODE_SHIFT;
 	tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) |
 		(TGCR_UNRESET << TGCR_TIM34RS_SHIFT);
-	__raw_writel(tgcr, base + TCR);
+	__raw_writel(tgcr, base + TGCR);
 
 	/* clear counter and period regs */
 	__raw_writel(0, base + TIM12);
@@ -432,12 +432,8 @@ void davinci_watchdog_reset(void)
 	__raw_writel(0, base + PRD12);
 	__raw_writel(0, base + PRD34);
 
-	/* enable */
-	wdtcr = __raw_readl(base + WDTCR);
-	wdtcr |= WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT;
-	__raw_writel(wdtcr, base + WDTCR);
-
 	/* put watchdog in pre-active state */
+	wdtcr = __raw_readl(base + WDTCR);
 	wdtcr = (WDTCR_WDKEY_SEQ0 << WDTCR_WDKEY_SHIFT) |
 		(WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT);
 	__raw_writel(wdtcr, base + WDTCR);
-- 
cgit v1.2.3


From 98d0e9fc6bf1dc8227a7848eea1e28bf19f5a32d Mon Sep 17 00:00:00 2001
From: "Rajashekhara, Sudhakar" <sudhakar.raj@ti.com>
Date: Tue, 2 Jun 2009 06:48:43 -0400
Subject: davinci: dm644x: Support for dm644x silicon revision 2.1

JTAG ID for DM644x silicon revision 2.1 has changed. An entry for the new
silicon revision needs to be added to the davinci_id structure. Without
this addition, EVMs with new silicon revision fail to boot the kernel.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/dm644x.c | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index d145c0cbfe6..7d51263caf1 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -580,6 +580,13 @@ static struct davinci_id dm644x_ids[] = {
 		.cpu_id		= DAVINCI_CPU_ID_DM6446,
 		.name		= "dm6446",
 	},
+	{
+		.variant	= 0x1,
+		.part_no	= 0xb700,
+		.manufacturer	= 0x017,
+		.cpu_id		= DAVINCI_CPU_ID_DM6446,
+		.name		= "dm6446a",
+	},
 };
 
 static void __iomem *dm644x_psc_bases[] = {
-- 
cgit v1.2.3


From f28f03bba423bbccf102abc9c1921d50a4499d66 Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Wed, 3 Jun 2009 14:54:27 -0700
Subject: davinci: Kconfig: enable EVMs by default when SoCs are enabled

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/Kconfig | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index be747f5c6cd..b06cf85fd29 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -26,7 +26,7 @@ comment "DaVinci Board Type"
 
 config MACH_DAVINCI_EVM
 	bool "TI DM644x EVM"
-	default y
+	default ARCH_DAVINCI_DM644x
 	depends on ARCH_DAVINCI_DM644x
 	help
 	  Configure this option to specify the whether the board used
@@ -41,6 +41,7 @@ config MACH_SFFSDR
 
 config MACH_DAVINCI_DM355_EVM
 	bool "TI DM355 EVM"
+	default ARCH_DAVINCI_DM355
 	depends on ARCH_DAVINCI_DM355
 	help
 	  Configure this option to specify the whether the board used
@@ -55,6 +56,7 @@ config MACH_DM355_LEOPARD
 
 config MACH_DAVINCI_DM6467_EVM
 	bool "TI DM6467 EVM"
+	default ARCH_DAVINCI_DM646x
 	depends on ARCH_DAVINCI_DM646x
 	help
 	  Configure this option to specify the whether the board used
-- 
cgit v1.2.3


From 1d3bba61f69f447f11aa88e82c5840319962d4cd Mon Sep 17 00:00:00 2001
From: David Brownell <david-b@pacbell.net>
Date: Fri, 5 Jun 2009 21:45:14 -0700
Subject: davinci: sram warning fix

CC      arch/arm/mach-davinci/sram.o
arch/arm/mach-davinci/sram.c: In function 'sram_init':
arch/arm/mach-davinci/sram.c:63: warning: comparison of distinct pointer types lacks a cast

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/sram.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/sram.c b/arch/arm/mach-davinci/sram.c
index db54b2a66b4..4f1fc9b318b 100644
--- a/arch/arm/mach-davinci/sram.c
+++ b/arch/arm/mach-davinci/sram.c
@@ -60,7 +60,7 @@ static int __init sram_init(void)
 	int status = 0;
 
 	if (len) {
-		len = min(len, SRAM_SIZE);
+		len = min_t(unsigned, len, SRAM_SIZE);
 		sram_pool = gen_pool_create(ilog2(SRAM_GRANULARITY), -1);
 		if (!sram_pool)
 			status = -ENOMEM;
-- 
cgit v1.2.3


From 5fcd294df26e6160f32ea551ef074630b4df728d Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Wed, 3 Jun 2009 12:24:50 -0700
Subject: davinci: remove watchdog from soc_info

watchdog info is not needed in soc_info, platform_device can
be used directly in core code.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/devices.c             | 7 ++-----
 arch/arm/mach-davinci/dm355.c               | 1 -
 arch/arm/mach-davinci/dm644x.c              | 1 -
 arch/arm/mach-davinci/dm646x.c              | 1 -
 arch/arm/mach-davinci/include/mach/common.h | 1 -
 arch/arm/mach-davinci/time.c                | 6 +++---
 6 files changed, 5 insertions(+), 12 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index 7a2f8ae89be..385e8332fc2 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -216,6 +216,8 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
 
 static struct resource wdt_resources[] = {
 	{
+		.start	= DAVINCI_WDOG_BASE,
+		.end	= DAVINCI_WDOG_BASE + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 };
@@ -229,11 +231,6 @@ struct platform_device davinci_wdt_device = {
 
 static void davinci_init_wdt(void)
 {
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	wdt_resources[0].start = (resource_size_t)soc_info->wdt_base;
-	wdt_resources[0].end = (resource_size_t)soc_info->wdt_base + SZ_1K - 1;
-
 	platform_device_register(&davinci_wdt_device);
 }
 
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 373f0c4003a..48f33e42051 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -727,7 +727,6 @@ static struct davinci_soc_info davinci_soc_info_dm355 = {
 	.intc_irq_prios		= dm355_default_priorities,
 	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
 	.timer_info		= &dm355_timer_info,
-	.wdt_base		= IO_ADDRESS(DAVINCI_WDOG_BASE),
 	.gpio_base		= IO_ADDRESS(DAVINCI_GPIO_BASE),
 	.gpio_num		= 104,
 	.gpio_irq		= IRQ_DM355_GPIOBNK0,
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 7d51263caf1..d20e447a8b4 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -660,7 +660,6 @@ static struct davinci_soc_info davinci_soc_info_dm644x = {
 	.intc_irq_prios 	= dm644x_default_priorities,
 	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
 	.timer_info		= &dm644x_timer_info,
-	.wdt_base		= IO_ADDRESS(DAVINCI_WDOG_BASE),
 	.gpio_base		= IO_ADDRESS(DAVINCI_GPIO_BASE),
 	.gpio_num		= 71,
 	.gpio_irq		= IRQ_GPIOBNK0,
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 1391513b738..2c76a4d47bf 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -691,7 +691,6 @@ static struct davinci_soc_info davinci_soc_info_dm646x = {
 	.intc_irq_prios		= dm646x_default_priorities,
 	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
 	.timer_info		= &dm646x_timer_info,
-	.wdt_base		= IO_ADDRESS(DAVINCI_WDOG_BASE),
 	.gpio_base		= IO_ADDRESS(DAVINCI_GPIO_BASE),
 	.gpio_num		= 43, /* Only 33 usable */
 	.gpio_irq		= IRQ_DM646X_GPIOBNK0,
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index a1f03b606d8..b21393b24d6 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -60,7 +60,6 @@ struct davinci_soc_info {
 	u8				*intc_irq_prios;
 	unsigned long			intc_irq_num;
 	struct davinci_timer_info	*timer_info;
-	void __iomem			*wdt_base;
 	void __iomem			*gpio_base;
 	unsigned			gpio_num;
 	unsigned			gpio_irq;
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index ca85d187176..0d1b6d407b4 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -406,11 +406,11 @@ struct sys_timer davinci_timer = {
 void davinci_watchdog_reset(void)
 {
 	u32 tgcr, wdtcr;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	void __iomem *base = soc_info->wdt_base;
+	struct platform_device *pdev = &davinci_wdt_device;
+	void __iomem *base = IO_ADDRESS(pdev->resource[0].start);
 	struct clk *wd_clk;
 
-	wd_clk = clk_get(&davinci_wdt_device.dev, NULL);
+	wd_clk = clk_get(&pdev->dev, NULL);
 	if (WARN_ON(IS_ERR(wd_clk)))
 		return;
 	clk_enable(wd_clk);
-- 
cgit v1.2.3


From fb8fcb891390639d6258c816abb537663495da0c Mon Sep 17 00:00:00 2001
From: Sandeep Paulraj <s-paulraj@ti.com>
Date: Thu, 11 Jun 2009 09:41:05 -0400
Subject: davinci: Adding DM365 SOC Support

The patch adds base support for new TI SOC DM365, which s
similar to the dm355.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/clock.c                |   5 +-
 arch/arm/mach-davinci/dm365.c                | 699 +++++++++++++++++++++++++++
 arch/arm/mach-davinci/include/mach/cputype.h |   8 +
 arch/arm/mach-davinci/include/mach/dm365.h   |  29 ++
 arch/arm/mach-davinci/include/mach/irqs.h    |  36 ++
 arch/arm/mach-davinci/include/mach/mux.h     |  81 ++++
 arch/arm/mach-davinci/include/mach/psc.h     |  18 +
 7 files changed, 875 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-davinci/dm365.c
 create mode 100644 arch/arm/mach-davinci/include/mach/dm365.h

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index 39bf321d70a..83d54d50b5e 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -227,7 +227,10 @@ static void __init clk_pll_init(struct clk *clk)
 	if (ctrl & PLLCTL_PLLEN) {
 		bypass = 0;
 		mult = __raw_readl(pll->base + PLLM);
-		mult = (mult & PLLM_PLLM_MASK) + 1;
+		if (cpu_is_davinci_dm365())
+			mult = 2 * (mult & PLLM_PLLM_MASK);
+		else
+			mult = (mult & PLLM_PLLM_MASK) + 1;
 	} else
 		bypass = 1;
 
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
new file mode 100644
index 00000000000..69d35d94776
--- /dev/null
+++ b/arch/arm/mach-davinci/dm365.c
@@ -0,0 +1,699 @@
+/*
+ * TI DaVinci DM365 chip specific setup
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/serial_8250.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/dm365.h>
+#include <mach/clock.h>
+#include <mach/cputype.h>
+#include <mach/edma.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+#include <mach/irqs.h>
+#include <mach/time.h>
+#include <mach/serial.h>
+#include <mach/common.h>
+
+#include "clock.h"
+#include "mux.h"
+
+#define DM365_REF_FREQ		24000000	/* 24 MHz on the DM365 EVM */
+
+static struct pll_data pll1_data = {
+	.num		= 1,
+	.phys_base	= DAVINCI_PLL1_BASE,
+	.flags		= PLL_HAS_POSTDIV | PLL_HAS_PREDIV,
+};
+
+static struct pll_data pll2_data = {
+	.num		= 2,
+	.phys_base	= DAVINCI_PLL2_BASE,
+	.flags		= PLL_HAS_POSTDIV | PLL_HAS_PREDIV,
+};
+
+static struct clk ref_clk = {
+	.name		= "ref_clk",
+	.rate		= DM365_REF_FREQ,
+};
+
+static struct clk pll1_clk = {
+	.name		= "pll1",
+	.parent		= &ref_clk,
+	.flags		= CLK_PLL,
+	.pll_data	= &pll1_data,
+};
+
+static struct clk pll1_aux_clk = {
+	.name		= "pll1_aux_clk",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll1_sysclkbp = {
+	.name		= "pll1_sysclkbp",
+	.parent		= &pll1_clk,
+	.flags 		= CLK_PLL | PRE_PLL,
+	.div_reg	= BPDIV
+};
+
+static struct clk clkout0_clk = {
+	.name		= "clkout0",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll1_sysclk1 = {
+	.name		= "pll1_sysclk1",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV1,
+};
+
+static struct clk pll1_sysclk2 = {
+	.name		= "pll1_sysclk2",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV2,
+};
+
+static struct clk pll1_sysclk3 = {
+	.name		= "pll1_sysclk3",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV3,
+};
+
+static struct clk pll1_sysclk4 = {
+	.name		= "pll1_sysclk4",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV4,
+};
+
+static struct clk pll1_sysclk5 = {
+	.name		= "pll1_sysclk5",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV5,
+};
+
+static struct clk pll1_sysclk6 = {
+	.name		= "pll1_sysclk6",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV6,
+};
+
+static struct clk pll1_sysclk7 = {
+	.name		= "pll1_sysclk7",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV7,
+};
+
+static struct clk pll1_sysclk8 = {
+	.name		= "pll1_sysclk8",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV8,
+};
+
+static struct clk pll1_sysclk9 = {
+	.name		= "pll1_sysclk9",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV9,
+};
+
+static struct clk pll2_clk = {
+	.name		= "pll2",
+	.parent		= &ref_clk,
+	.flags		= CLK_PLL,
+	.pll_data	= &pll2_data,
+};
+
+static struct clk pll2_aux_clk = {
+	.name		= "pll2_aux_clk",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL | PRE_PLL,
+};
+
+static struct clk clkout1_clk = {
+	.name		= "clkout1",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll2_sysclk1 = {
+	.name		= "pll2_sysclk1",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV1,
+};
+
+static struct clk pll2_sysclk2 = {
+	.name		= "pll2_sysclk2",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV2,
+};
+
+static struct clk pll2_sysclk3 = {
+	.name		= "pll2_sysclk3",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV3,
+};
+
+static struct clk pll2_sysclk4 = {
+	.name		= "pll2_sysclk4",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV4,
+};
+
+static struct clk pll2_sysclk5 = {
+	.name		= "pll2_sysclk5",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV5,
+};
+
+static struct clk pll2_sysclk6 = {
+	.name		= "pll2_sysclk6",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV6,
+};
+
+static struct clk pll2_sysclk7 = {
+	.name		= "pll2_sysclk7",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV7,
+};
+
+static struct clk pll2_sysclk8 = {
+	.name		= "pll2_sysclk8",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV8,
+};
+
+static struct clk pll2_sysclk9 = {
+	.name		= "pll2_sysclk9",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV9,
+};
+
+static struct clk vpss_dac_clk = {
+	.name		= "vpss_dac",
+	.parent		= &pll1_sysclk3,
+	.lpsc		= DM365_LPSC_DAC_CLK,
+};
+
+static struct clk vpss_master_clk = {
+	.name		= "vpss_master",
+	.parent		= &pll1_sysclk5,
+	.lpsc		= DM365_LPSC_VPSSMSTR,
+	.flags		= CLK_PSC,
+};
+
+static struct clk arm_clk = {
+	.name		= "arm_clk",
+	.parent		= &pll2_sysclk2,
+	.lpsc		= DAVINCI_LPSC_ARM,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk uart0_clk = {
+	.name		= "uart0",
+	.parent		= &pll1_aux_clk,
+	.lpsc		= DAVINCI_LPSC_UART0,
+};
+
+static struct clk uart1_clk = {
+	.name		= "uart1",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DAVINCI_LPSC_UART1,
+};
+
+static struct clk i2c_clk = {
+	.name		= "i2c",
+	.parent		= &pll1_aux_clk,
+	.lpsc		= DAVINCI_LPSC_I2C,
+};
+
+static struct clk mmcsd0_clk = {
+	.name		= "mmcsd0",
+	.parent		= &pll1_sysclk8,
+	.lpsc		= DAVINCI_LPSC_MMC_SD,
+};
+
+static struct clk mmcsd1_clk = {
+	.name		= "mmcsd1",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DM365_LPSC_MMC_SD1,
+};
+
+static struct clk spi0_clk = {
+	.name		= "spi0",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DAVINCI_LPSC_SPI,
+};
+
+static struct clk spi1_clk = {
+	.name		= "spi1",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DM365_LPSC_SPI1,
+};
+
+static struct clk spi2_clk = {
+	.name		= "spi2",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DM365_LPSC_SPI2,
+};
+
+static struct clk spi3_clk = {
+	.name		= "spi3",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DM365_LPSC_SPI3,
+};
+
+static struct clk spi4_clk = {
+	.name		= "spi4",
+	.parent		= &pll1_aux_clk,
+	.lpsc		= DM365_LPSC_SPI4,
+};
+
+static struct clk gpio_clk = {
+	.name		= "gpio",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DAVINCI_LPSC_GPIO,
+};
+
+static struct clk aemif_clk = {
+	.name		= "aemif",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DAVINCI_LPSC_AEMIF,
+};
+
+static struct clk pwm0_clk = {
+	.name		= "pwm0",
+	.parent		= &pll1_aux_clk,
+	.lpsc		= DAVINCI_LPSC_PWM0,
+};
+
+static struct clk pwm1_clk = {
+	.name		= "pwm1",
+	.parent		= &pll1_aux_clk,
+	.lpsc		= DAVINCI_LPSC_PWM1,
+};
+
+static struct clk pwm2_clk = {
+	.name		= "pwm2",
+	.parent		= &pll1_aux_clk,
+	.lpsc		= DAVINCI_LPSC_PWM2,
+};
+
+static struct clk pwm3_clk = {
+	.name		= "pwm3",
+	.parent		= &ref_clk,
+	.lpsc		= DM365_LPSC_PWM3,
+};
+
+static struct clk timer0_clk = {
+	.name		= "timer0",
+	.parent		= &pll1_aux_clk,
+	.lpsc		= DAVINCI_LPSC_TIMER0,
+};
+
+static struct clk timer1_clk = {
+	.name		= "timer1",
+	.parent		= &pll1_aux_clk,
+	.lpsc		= DAVINCI_LPSC_TIMER1,
+};
+
+static struct clk timer2_clk = {
+	.name		= "timer2",
+	.parent		= &pll1_aux_clk,
+	.lpsc		= DAVINCI_LPSC_TIMER2,
+	.usecount	= 1,
+};
+
+static struct clk timer3_clk = {
+	.name		= "timer3",
+	.parent		= &pll1_aux_clk,
+	.lpsc		= DM365_LPSC_TIMER3,
+};
+
+static struct clk usb_clk = {
+	.name		= "usb",
+	.parent		= &pll2_sysclk1,
+	.lpsc		= DAVINCI_LPSC_USB,
+};
+
+static struct clk emac_clk = {
+	.name		= "emac",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DM365_LPSC_EMAC,
+};
+
+static struct clk voicecodec_clk = {
+	.name		= "voice_codec",
+	.parent		= &pll2_sysclk4,
+	.lpsc		= DM365_LPSC_VOICE_CODEC,
+};
+
+static struct clk asp0_clk = {
+	.name		= "asp0",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DM365_LPSC_McBSP1,
+};
+
+static struct clk rto_clk = {
+	.name		= "rto",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DM365_LPSC_RTO,
+};
+
+static struct clk mjcp_clk = {
+	.name		= "mjcp",
+	.parent		= &pll1_sysclk3,
+	.lpsc		= DM365_LPSC_MJCP,
+};
+
+static struct davinci_clk dm365_clks[] = {
+	CLK(NULL, "ref", &ref_clk),
+	CLK(NULL, "pll1", &pll1_clk),
+	CLK(NULL, "pll1_aux", &pll1_aux_clk),
+	CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp),
+	CLK(NULL, "clkout0", &clkout0_clk),
+	CLK(NULL, "pll1_sysclk1", &pll1_sysclk1),
+	CLK(NULL, "pll1_sysclk2", &pll1_sysclk2),
+	CLK(NULL, "pll1_sysclk3", &pll1_sysclk3),
+	CLK(NULL, "pll1_sysclk4", &pll1_sysclk4),
+	CLK(NULL, "pll1_sysclk5", &pll1_sysclk5),
+	CLK(NULL, "pll1_sysclk6", &pll1_sysclk6),
+	CLK(NULL, "pll1_sysclk7", &pll1_sysclk7),
+	CLK(NULL, "pll1_sysclk8", &pll1_sysclk8),
+	CLK(NULL, "pll1_sysclk9", &pll1_sysclk9),
+	CLK(NULL, "pll2", &pll2_clk),
+	CLK(NULL, "pll2_aux", &pll2_aux_clk),
+	CLK(NULL, "clkout1", &clkout1_clk),
+	CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
+	CLK(NULL, "pll2_sysclk2", &pll2_sysclk2),
+	CLK(NULL, "pll2_sysclk3", &pll2_sysclk3),
+	CLK(NULL, "pll2_sysclk4", &pll2_sysclk4),
+	CLK(NULL, "pll2_sysclk5", &pll2_sysclk5),
+	CLK(NULL, "pll2_sysclk6", &pll2_sysclk6),
+	CLK(NULL, "pll2_sysclk7", &pll2_sysclk7),
+	CLK(NULL, "pll2_sysclk8", &pll2_sysclk8),
+	CLK(NULL, "pll2_sysclk9", &pll2_sysclk9),
+	CLK(NULL, "vpss_dac", &vpss_dac_clk),
+	CLK(NULL, "vpss_master", &vpss_master_clk),
+	CLK(NULL, "arm", &arm_clk),
+	CLK(NULL, "uart0", &uart0_clk),
+	CLK(NULL, "uart1", &uart1_clk),
+	CLK("i2c_davinci.1", NULL, &i2c_clk),
+	CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
+	CLK("davinci_mmc.1", NULL, &mmcsd1_clk),
+	CLK("spi_davinci.0", NULL, &spi0_clk),
+	CLK("spi_davinci.1", NULL, &spi1_clk),
+	CLK("spi_davinci.2", NULL, &spi2_clk),
+	CLK("spi_davinci.3", NULL, &spi3_clk),
+	CLK("spi_davinci.4", NULL, &spi4_clk),
+	CLK(NULL, "gpio", &gpio_clk),
+	CLK(NULL, "aemif", &aemif_clk),
+	CLK(NULL, "pwm0", &pwm0_clk),
+	CLK(NULL, "pwm1", &pwm1_clk),
+	CLK(NULL, "pwm2", &pwm2_clk),
+	CLK(NULL, "pwm3", &pwm3_clk),
+	CLK(NULL, "timer0", &timer0_clk),
+	CLK(NULL, "timer1", &timer1_clk),
+	CLK("watchdog", NULL, &timer2_clk),
+	CLK(NULL, "timer3", &timer3_clk),
+	CLK(NULL, "usb", &usb_clk),
+	CLK("davinci_emac.1", NULL, &emac_clk),
+	CLK("voice_codec", NULL, &voicecodec_clk),
+	CLK("soc-audio.0", NULL, &asp0_clk),
+	CLK(NULL, "rto", &rto_clk),
+	CLK(NULL, "mjcp", &mjcp_clk),
+	CLK(NULL, NULL, NULL),
+};
+
+/*----------------------------------------------------------------------*/
+
+#define PINMUX0		0x00
+#define PINMUX1		0x04
+#define PINMUX2		0x08
+#define PINMUX3		0x0c
+#define PINMUX4		0x10
+#define INTMUX		0x18
+#define EVTMUX		0x1c
+
+
+static const struct mux_config dm365_pins[] = {
+#ifdef CONFIG_DAVINCI_MUX
+MUX_CFG(DM365,	MMCSD0,		0,   24,     1,	  0,	 false)
+
+MUX_CFG(DM365,	SD1_CLK,	0,   16,    3,	  1,	 false)
+MUX_CFG(DM365,	SD1_CMD,	4,   30,    3,	  1,	 false)
+MUX_CFG(DM365,	SD1_DATA3,	4,   28,    3,	  1,	 false)
+MUX_CFG(DM365,	SD1_DATA2,	4,   26,    3,	  1,	 false)
+MUX_CFG(DM365,	SD1_DATA1,	4,   24,    3,	  1,	 false)
+MUX_CFG(DM365,	SD1_DATA0,	4,   22,    3,	  1,	 false)
+
+MUX_CFG(DM365,	I2C_SDA,	3,   23,    3,	  2,	 false)
+MUX_CFG(DM365,	I2C_SCL,	3,   21,    3,	  2,	 false)
+
+MUX_CFG(DM365,	AEMIF_AR,	2,   0,     3,	  1,	 false)
+MUX_CFG(DM365,	AEMIF_A3,	2,   2,     3,	  1,	 false)
+MUX_CFG(DM365,	AEMIF_A7,	2,   4,     3,	  1,	 false)
+MUX_CFG(DM365,	AEMIF_D15_8,	2,   6,     1,	  1,	 false)
+MUX_CFG(DM365,	AEMIF_CE0,	2,   7,     1,	  0,	 false)
+
+MUX_CFG(DM365,	MCBSP0_BDX,	0,   23,    1,	  1,	 false)
+MUX_CFG(DM365,	MCBSP0_X,	0,   22,    1,	  1,	 false)
+MUX_CFG(DM365,	MCBSP0_BFSX,	0,   21,    1,	  1,	 false)
+MUX_CFG(DM365,	MCBSP0_BDR,	0,   20,    1,	  1,	 false)
+MUX_CFG(DM365,	MCBSP0_R,	0,   19,    1,	  1,	 false)
+MUX_CFG(DM365,	MCBSP0_BFSR,	0,   18,    1,	  1,	 false)
+
+MUX_CFG(DM365,	SPI0_SCLK,	3,   28,    1,    1,	 false)
+MUX_CFG(DM365,	SPI0_SDI,	3,   26,    3,    1,	 false)
+MUX_CFG(DM365,	SPI0_SDO,	3,   25,    1,    1,	 false)
+MUX_CFG(DM365,	SPI0_SDENA0,	3,   29,    3,    1,	 false)
+MUX_CFG(DM365,	SPI0_SDENA1,	3,   26,    3,    2,	 false)
+
+MUX_CFG(DM365,	UART0_RXD,	3,   20,    1,    1,	 false)
+MUX_CFG(DM365,	UART0_TXD,	3,   19,    1,    1,	 false)
+MUX_CFG(DM365,	UART1_RXD,	3,   17,    3,    2,	 false)
+MUX_CFG(DM365,	UART1_TXD,	3,   15,    3,    2,	 false)
+MUX_CFG(DM365,	UART1_RTS,	3,   23,    3,    1,	 false)
+MUX_CFG(DM365,	UART1_CTS,	3,   21,    3,    1,	 false)
+
+MUX_CFG(DM365,  EMAC_TX_EN,	3,   17,    3,    1,     false)
+MUX_CFG(DM365,  EMAC_TX_CLK,	3,   15,    3,    1,     false)
+MUX_CFG(DM365,  EMAC_COL,	3,   14,    1,    1,     false)
+MUX_CFG(DM365,  EMAC_TXD3,	3,   13,    1,    1,     false)
+MUX_CFG(DM365,  EMAC_TXD2,	3,   12,    1,    1,     false)
+MUX_CFG(DM365,  EMAC_TXD1,	3,   11,    1,    1,     false)
+MUX_CFG(DM365,  EMAC_TXD0,	3,   10,    1,    1,     false)
+MUX_CFG(DM365,  EMAC_RXD3,	3,   9,     1,    1,     false)
+MUX_CFG(DM365,  EMAC_RXD2,	3,   8,     1,    1,     false)
+MUX_CFG(DM365,  EMAC_RXD1,	3,   7,     1,    1,     false)
+MUX_CFG(DM365,  EMAC_RXD0,	3,   6,     1,    1,     false)
+MUX_CFG(DM365,  EMAC_RX_CLK,	3,   5,     1,    1,     false)
+MUX_CFG(DM365,  EMAC_RX_DV,	3,   4,     1,    1,     false)
+MUX_CFG(DM365,  EMAC_RX_ER,	3,   3,     1,    1,     false)
+MUX_CFG(DM365,  EMAC_CRS,	3,   2,     1,    1,     false)
+MUX_CFG(DM365,  EMAC_MDIO,	3,   1,     1,    1,     false)
+MUX_CFG(DM365,  EMAC_MDCLK,	3,   0,     1,    1,     false)
+#endif
+};
+
+
+static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+	[IRQ_VDINT0]			= 2,
+	[IRQ_VDINT1]			= 6,
+	[IRQ_VDINT2]			= 6,
+	[IRQ_HISTINT]			= 6,
+	[IRQ_H3AINT]			= 6,
+	[IRQ_PRVUINT]			= 6,
+	[IRQ_RSZINT]			= 6,
+	[IRQ_DM365_INSFINT]		= 7,
+	[IRQ_VENCINT]			= 6,
+	[IRQ_ASQINT]			= 6,
+	[IRQ_IMXINT]			= 6,
+	[IRQ_DM365_IMCOPINT]		= 4,
+	[IRQ_USBINT]			= 4,
+	[IRQ_DM365_RTOINT]		= 7,
+	[IRQ_DM365_TINT5]		= 7,
+	[IRQ_DM365_TINT6]		= 5,
+	[IRQ_CCINT0]			= 5,
+	[IRQ_CCERRINT]			= 5,
+	[IRQ_TCERRINT0]			= 5,
+	[IRQ_TCERRINT]			= 7,
+	[IRQ_PSCIN]			= 4,
+	[IRQ_DM365_SPINT2_1]		= 7,
+	[IRQ_DM365_TINT7]		= 7,
+	[IRQ_DM365_SDIOINT0]		= 7,
+	[IRQ_MBXINT]			= 7,
+	[IRQ_MBRINT]			= 7,
+	[IRQ_MMCINT]			= 7,
+	[IRQ_DM365_MMCINT1]		= 7,
+	[IRQ_DM365_PWMINT3]		= 7,
+	[IRQ_DDRINT]			= 4,
+	[IRQ_AEMIFINT]			= 2,
+	[IRQ_DM365_SDIOINT1]		= 2,
+	[IRQ_TINT0_TINT12]		= 7,
+	[IRQ_TINT0_TINT34]		= 7,
+	[IRQ_TINT1_TINT12]		= 7,
+	[IRQ_TINT1_TINT34]		= 7,
+	[IRQ_PWMINT0]			= 7,
+	[IRQ_PWMINT1]			= 3,
+	[IRQ_PWMINT2]			= 3,
+	[IRQ_I2C]			= 3,
+	[IRQ_UARTINT0]			= 3,
+	[IRQ_UARTINT1]			= 3,
+	[IRQ_DM365_SPIINT0_0]		= 3,
+	[IRQ_DM365_SPIINT3_0]		= 3,
+	[IRQ_DM365_GPIO0]		= 3,
+	[IRQ_DM365_GPIO1]		= 7,
+	[IRQ_DM365_GPIO2]		= 4,
+	[IRQ_DM365_GPIO3]		= 4,
+	[IRQ_DM365_GPIO4]		= 7,
+	[IRQ_DM365_GPIO5]		= 7,
+	[IRQ_DM365_GPIO6]		= 7,
+	[IRQ_DM365_GPIO7]		= 7,
+	[IRQ_DM365_EMAC_RXTHRESH]	= 7,
+	[IRQ_DM365_EMAC_RXPULSE]	= 7,
+	[IRQ_DM365_EMAC_TXPULSE]	= 7,
+	[IRQ_DM365_EMAC_MISCPULSE]	= 7,
+	[IRQ_DM365_GPIO12]		= 7,
+	[IRQ_DM365_GPIO13]		= 7,
+	[IRQ_DM365_GPIO14]		= 7,
+	[IRQ_DM365_GPIO15]		= 7,
+	[IRQ_DM365_KEYINT]		= 7,
+	[IRQ_DM365_TCERRINT2]		= 7,
+	[IRQ_DM365_TCERRINT3]		= 7,
+	[IRQ_DM365_EMUINT]		= 7,
+};
+
+static struct map_desc dm365_io_desc[] = {
+	{
+		.virtual	= IO_VIRT,
+		.pfn		= __phys_to_pfn(IO_PHYS),
+		.length		= IO_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= SRAM_VIRT,
+		.pfn		= __phys_to_pfn(0x00010000),
+		.length		= SZ_32K,
+		/* MT_MEMORY_NONCACHED requires supersection alignment */
+		.type		= MT_DEVICE,
+	},
+};
+
+/* Contents of JTAG ID register used to identify exact cpu type */
+static struct davinci_id dm365_ids[] = {
+	{
+		.variant	= 0x0,
+		.part_no	= 0xb83e,
+		.manufacturer	= 0x017,
+		.cpu_id		= DAVINCI_CPU_ID_DM365,
+		.name		= "dm365",
+	},
+};
+
+static void __iomem *dm365_psc_bases[] = {
+	IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE),
+};
+
+struct davinci_timer_info dm365_timer_info = {
+	.timers		= davinci_timer_instance,
+	.clockevent_id	= T0_BOT,
+	.clocksource_id	= T0_TOP,
+};
+
+static struct plat_serial8250_port dm365_serial_platform_data[] = {
+	{
+		.mapbase	= DAVINCI_UART0_BASE,
+		.irq		= IRQ_UARTINT0,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= DAVINCI_UART1_BASE,
+		.irq		= IRQ_UARTINT1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.flags		= 0
+	},
+};
+
+static struct platform_device dm365_serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= dm365_serial_platform_data,
+	},
+};
+
+static struct davinci_soc_info davinci_soc_info_dm365 = {
+	.io_desc		= dm365_io_desc,
+	.io_desc_num		= ARRAY_SIZE(dm365_io_desc),
+	.jtag_id_base		= IO_ADDRESS(0x01c40028),
+	.ids			= dm365_ids,
+	.ids_num		= ARRAY_SIZE(dm365_ids),
+	.cpu_clks		= dm365_clks,
+	.psc_bases		= dm365_psc_bases,
+	.psc_bases_num		= ARRAY_SIZE(dm365_psc_bases),
+	.pinmux_base		= IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE),
+	.pinmux_pins		= dm365_pins,
+	.pinmux_pins_num	= ARRAY_SIZE(dm365_pins),
+	.intc_base		= IO_ADDRESS(DAVINCI_ARM_INTC_BASE),
+	.intc_type		= DAVINCI_INTC_TYPE_AINTC,
+	.intc_irq_prios		= dm365_default_priorities,
+	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
+	.timer_info		= &dm365_timer_info,
+	.gpio_base		= IO_ADDRESS(DAVINCI_GPIO_BASE),
+	.gpio_num		= 104,
+	.gpio_irq		= 44,
+	.serial_dev		= &dm365_serial_device,
+	.sram_dma		= 0x00010000,
+	.sram_len		= SZ_32K,
+};
+
+void __init dm365_init(void)
+{
+	davinci_common_init(&davinci_soc_info_dm365);
+}
diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h
index d12a5ed2959..56b92d49e29 100644
--- a/arch/arm/mach-davinci/include/mach/cputype.h
+++ b/arch/arm/mach-davinci/include/mach/cputype.h
@@ -30,6 +30,7 @@ struct davinci_id {
 #define	DAVINCI_CPU_ID_DM6446		0x64460000
 #define	DAVINCI_CPU_ID_DM6467		0x64670000
 #define	DAVINCI_CPU_ID_DM355		0x03550000
+#define	DAVINCI_CPU_ID_DM365		0x03650000
 
 #define IS_DAVINCI_CPU(type, id)					\
 static inline int is_davinci_ ##type(void)				\
@@ -40,6 +41,7 @@ static inline int is_davinci_ ##type(void)				\
 IS_DAVINCI_CPU(dm644x, DAVINCI_CPU_ID_DM6446)
 IS_DAVINCI_CPU(dm646x, DAVINCI_CPU_ID_DM6467)
 IS_DAVINCI_CPU(dm355, DAVINCI_CPU_ID_DM355)
+IS_DAVINCI_CPU(dm365, DAVINCI_CPU_ID_DM365)
 
 #ifdef CONFIG_ARCH_DAVINCI_DM644x
 #define cpu_is_davinci_dm644x() is_davinci_dm644x()
@@ -59,4 +61,10 @@ IS_DAVINCI_CPU(dm355, DAVINCI_CPU_ID_DM355)
 #define cpu_is_davinci_dm355() 0
 #endif
 
+#ifdef CONFIG_ARCH_DAVINCI_DM365
+#define cpu_is_davinci_dm365() is_davinci_dm365()
+#else
+#define cpu_is_davinci_dm365() 0
+#endif
+
 #endif
diff --git a/arch/arm/mach-davinci/include/mach/dm365.h b/arch/arm/mach-davinci/include/mach/dm365.h
new file mode 100644
index 00000000000..09db4343bb4
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/dm365.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __ASM_ARCH_DM365_H
+#define __ASM_ARCH_DM665_H
+
+#include <linux/platform_device.h>
+#include <mach/hardware.h>
+#include <mach/emac.h>
+
+#define DM365_EMAC_BASE			(0x01D07000)
+#define DM365_EMAC_CNTRL_OFFSET		(0x0000)
+#define DM365_EMAC_CNTRL_MOD_OFFSET	(0x3000)
+#define DM365_EMAC_CNTRL_RAM_OFFSET	(0x1000)
+#define DM365_EMAC_MDIO_OFFSET		(0x4000)
+#define DM365_EMAC_CNTRL_RAM_SIZE	(0x2000)
+
+void __init dm365_init(void);
+
+#endif /* __ASM_ARCH_DM365_H */
diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h
index bc5d6aaa69a..0d34f2fb099 100644
--- a/arch/arm/mach-davinci/include/mach/irqs.h
+++ b/arch/arm/mach-davinci/include/mach/irqs.h
@@ -206,4 +206,40 @@
 #define IRQ_DM355_GPIOBNK5	59
 #define IRQ_DM355_GPIOBNK6	60
 
+/* DaVinci DM365-specific Interrupts */
+#define IRQ_DM365_INSFINT	7
+#define IRQ_DM365_IMCOPINT	11
+#define IRQ_DM365_RTOINT	13
+#define IRQ_DM365_TINT5		14
+#define IRQ_DM365_TINT6		15
+#define IRQ_DM365_SPINT2_1	21
+#define IRQ_DM365_TINT7		22
+#define IRQ_DM365_SDIOINT0	23
+#define IRQ_DM365_MMCINT1	27
+#define IRQ_DM365_PWMINT3	28
+#define IRQ_DM365_SDIOINT1	31
+#define IRQ_DM365_SPIINT0_0	42
+#define IRQ_DM365_SPIINT3_0	43
+#define IRQ_DM365_GPIO0		44
+#define IRQ_DM365_GPIO1		45
+#define IRQ_DM365_GPIO2		46
+#define IRQ_DM365_GPIO3		47
+#define IRQ_DM365_GPIO4		48
+#define IRQ_DM365_GPIO5		49
+#define IRQ_DM365_GPIO6		50
+#define IRQ_DM365_GPIO7		51
+#define IRQ_DM365_EMAC_RXTHRESH	52
+#define IRQ_DM365_EMAC_RXPULSE	53
+#define IRQ_DM365_EMAC_TXPULSE	54
+#define IRQ_DM365_EMAC_MISCPULSE 55
+#define IRQ_DM365_GPIO12	56
+#define IRQ_DM365_GPIO13	57
+#define IRQ_DM365_GPIO14	58
+#define IRQ_DM365_GPIO15	59
+#define IRQ_DM365_ADCINT	59
+#define IRQ_DM365_KEYINT	60
+#define IRQ_DM365_TCERRINT2	61
+#define IRQ_DM365_TCERRINT3	62
+#define IRQ_DM365_EMUINT	63
+
 #endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index 27378458542..c182bd458d7 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -156,6 +156,87 @@ enum davinci_dm355_index {
 	DM355_EVT26_MMC0_RX,
 };
 
+enum davinci_dm365_index {
+	/* MMC/SD 0 */
+	DM365_MMCSD0,
+
+	/* MMC/SD 1 */
+	DM365_SD1_CLK,
+	DM365_SD1_CMD,
+	DM365_SD1_DATA3,
+	DM365_SD1_DATA2,
+	DM365_SD1_DATA1,
+	DM365_SD1_DATA0,
+
+	/* I2C */
+	DM365_I2C_SDA,
+	DM365_I2C_SCL,
+
+	/* AEMIF */
+	DM365_AEMIF_AR,
+	DM365_AEMIF_A3,
+	DM365_AEMIF_A7,
+	DM365_AEMIF_D15_8,
+	DM365_AEMIF_CE0,
+
+	/* ASP0 function */
+	DM365_MCBSP0_BDX,
+	DM365_MCBSP0_X,
+	DM365_MCBSP0_BFSX,
+	DM365_MCBSP0_BDR,
+	DM365_MCBSP0_R,
+	DM365_MCBSP0_BFSR,
+
+	/* SPI0 */
+	DM365_SPI0_SCLK,
+	DM365_SPI0_SDI,
+	DM365_SPI0_SDO,
+	DM365_SPI0_SDENA0,
+	DM365_SPI0_SDENA1,
+
+	/* UART */
+	DM365_UART0_RXD,
+	DM365_UART0_TXD,
+	DM365_UART1_RXD,
+	DM365_UART1_TXD,
+	DM365_UART1_RTS,
+	DM365_UART1_CTS,
+
+	/* EMAC */
+	DM365_EMAC_TX_EN,
+	DM365_EMAC_TX_CLK,
+	DM365_EMAC_COL,
+	DM365_EMAC_TXD3,
+	DM365_EMAC_TXD2,
+	DM365_EMAC_TXD1,
+	DM365_EMAC_TXD0,
+	DM365_EMAC_RXD3,
+	DM365_EMAC_RXD2,
+	DM365_EMAC_RXD1,
+	DM365_EMAC_RXD0,
+	DM365_EMAC_RX_CLK,
+	DM365_EMAC_RX_DV,
+	DM365_EMAC_RX_ER,
+	DM365_EMAC_CRS,
+	DM365_EMAC_MDIO,
+	DM365_EMAC_MDCLK,
+
+	/* IRQ muxing */
+	DM365_INT_EDMA_CC,
+	DM365_INT_EDMA_TC0_ERR,
+	DM365_INT_EDMA_TC1_ERR,
+	DM365_INT_PRTCSS,
+	DM365_INT_EMAC_RXTHRESH,
+	DM365_INT_EMAC_RXPULSE,
+	DM365_INT_EMAC_TXPULSE,
+	DM365_INT_EMAC_MISCPULSE,
+
+	/* EDMA event muxing */
+	DM365_EVT2_ASP_TX,
+	DM365_EVT3_ASP_RX,
+	DM365_EVT26_MMC0_RX,
+};
+
 #ifdef CONFIG_DAVINCI_MUX
 /* setup pin muxing */
 extern int davinci_cfg_reg(unsigned long reg_cfg);
diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h
index ab8a2586d1c..2bb414b1429 100644
--- a/arch/arm/mach-davinci/include/mach/psc.h
+++ b/arch/arm/mach-davinci/include/mach/psc.h
@@ -81,6 +81,24 @@
 #define DM355_LPSC_RTO			12
 #define DM355_LPSC_VPSS_DAC		41
 
+/* DM365 */
+#define DM365_LPSC_TIMER3	5
+#define DM365_LPSC_SPI1		6
+#define DM365_LPSC_MMC_SD1	7
+#define DM365_LPSC_McBSP1	8
+#define DM365_LPSC_PWM3		10
+#define DM365_LPSC_SPI2		11
+#define DM365_LPSC_RTO		12
+#define DM365_LPSC_TIMER4	17
+#define DM365_LPSC_SPI0		22
+#define DM365_LPSC_SPI3		38
+#define DM365_LPSC_SPI4		39
+#define DM365_LPSC_EMAC		40
+#define DM365_LPSC_VOICE_CODEC	44
+#define DM365_LPSC_DAC_CLK	46
+#define DM365_LPSC_VPSSMSTR	47
+#define DM365_LPSC_MJCP		50
+
 /*
  * LPSC Assignments
  */
-- 
cgit v1.2.3


From 37dd00956361528776d1dd76eb303a55b91fb23a Mon Sep 17 00:00:00 2001
From: Sandeep Paulraj <s-paulraj@ti.com>
Date: Tue, 9 Jun 2009 16:28:15 -0400
Subject: davinci: Adding DM365 EVM board support

The patch adds support for Evaluation Module (EVM) board for the dm365
SoC.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-dm365-evm.c | 76 +++++++++++++++++++++++++++++++++
 1 file changed, 76 insertions(+)
 create mode 100644 arch/arm/mach-davinci/board-dm365-evm.c

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
new file mode 100644
index 00000000000..08c2f12d03d
--- /dev/null
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -0,0 +1,76 @@
+/*
+ * TI DaVinci DM365 EVM board support
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/dm365.h>
+#include <mach/psc.h>
+#include <mach/common.h>
+#include <mach/i2c.h>
+#include <linux/i2c.h>
+#include <mach/serial.h>
+#include <mach/common.h>
+
+static struct davinci_i2c_platform_data i2c_pdata = {
+	.bus_freq	= 400	/* kHz */,
+	.bus_delay	= 0	/* usec */,
+};
+
+static void __init evm_init_i2c(void)
+{
+	davinci_init_i2c(&i2c_pdata);
+}
+
+static struct davinci_uart_config uart_config __initdata = {
+	.enabled_uarts = (1 << 0),
+};
+
+static void __init dm365_evm_map_io(void)
+{
+	dm365_init();
+}
+
+static __init void dm365_evm_init(void)
+{
+	evm_init_i2c();
+	davinci_serial_init(&uart_config);
+}
+
+static __init void dm365_evm_irq_init(void)
+{
+	davinci_irq_init();
+}
+
+MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
+	.phys_io	= IO_PHYS,
+	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+	.boot_params	= (0x80000100),
+	.map_io		= dm365_evm_map_io,
+	.init_irq	= dm365_evm_irq_init,
+	.timer		= &davinci_timer,
+	.init_machine	= dm365_evm_init,
+MACHINE_END
+
-- 
cgit v1.2.3


From a46e9e403cf930c7a09f7732bba78b38ab14f067 Mon Sep 17 00:00:00 2001
From: Sandeep Paulraj <s-paulraj@ti.com>
Date: Tue, 9 Jun 2009 16:28:44 -0400
Subject: davinci: Adding DM365 entries to Makefile/Kconfig/defconfig

This patch does the following
1) Adds entries to davinci_all_defconfig for DM365
2) Adds entries to the Makefile for DM365
3) Adds entries for DM365 in the Kconfig

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/configs/davinci_all_defconfig |  2 ++
 arch/arm/mach-davinci/Kconfig          | 13 +++++++++++++
 arch/arm/mach-davinci/Makefile         |  2 ++
 3 files changed, 17 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index ac18662f38c..6eb6d9da0dc 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -191,6 +191,7 @@ CONFIG_AINTC=y
 CONFIG_ARCH_DAVINCI_DM644x=y
 CONFIG_ARCH_DAVINCI_DM355=y
 CONFIG_ARCH_DAVINCI_DM646x=y
+CONFIG_ARCH_DAVINCI_DM365=y
 
 #
 # DaVinci Board Type
@@ -200,6 +201,7 @@ CONFIG_MACH_SFFSDR=y
 CONFIG_MACH_DAVINCI_DM355_EVM=y
 CONFIG_MACH_DM355_LEOPARD=y
 CONFIG_MACH_DAVINCI_DM6467_EVM=y
+CONFIG_MACH_DAVINCI_DM365_EVM=y
 CONFIG_DAVINCI_MUX=y
 CONFIG_DAVINCI_MUX_DEBUG=y
 CONFIG_DAVINCI_MUX_WARNINGS=y
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index b06cf85fd29..b16f5e31c08 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -22,6 +22,11 @@ config ARCH_DAVINCI_DM646x
         bool "DaVinci 646x based system"
 	select AINTC
 
+config ARCH_DAVINCI_DM365
+	bool "DaVinci 365 based system"
+	select AINTC
+	select ARCH_DAVINCI_DMx
+
 comment "DaVinci Board Type"
 
 config MACH_DAVINCI_EVM
@@ -62,6 +67,14 @@ config MACH_DAVINCI_DM6467_EVM
 	  Configure this option to specify the whether the board used
 	  for development is a DM6467 EVM
 
+config MACH_DAVINCI_DM365_EVM
+	bool "TI DM365 EVM"
+	default ARCH_DAVINCI_DM365
+	depends on ARCH_DAVINCI_DM365
+	help
+	  Configure this option to specify whether the board used
+	  for development is a DM365 EVM
+
 
 config DAVINCI_MUX
 	bool "DAVINCI multiplexing support"
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 059ab78084b..bea7ba65b3f 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_DAVINCI_MUX)		+= mux.o
 obj-$(CONFIG_ARCH_DAVINCI_DM644x)       += dm644x.o
 obj-$(CONFIG_ARCH_DAVINCI_DM355)        += dm355.o
 obj-$(CONFIG_ARCH_DAVINCI_DM646x)       += dm646x.o
+obj-$(CONFIG_ARCH_DAVINCI_DM365)	+= dm365.o
 
 obj-$(CONFIG_AINTC)			+= irq.o
 obj-$(CONFIG_CP_INTC)			+= cp_intc.o
@@ -23,3 +24,4 @@ obj-$(CONFIG_MACH_SFFSDR)		+= board-sffsdr.o
 obj-$(CONFIG_MACH_DAVINCI_DM355_EVM)	+= board-dm355-evm.o
 obj-$(CONFIG_MACH_DM355_LEOPARD)	+= board-dm355-leopard.o
 obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM)	+= board-dm646x-evm.o
+obj-$(CONFIG_MACH_DAVINCI_DM365_EVM)	+= board-dm365-evm.o
-- 
cgit v1.2.3


From 9f5131538368b299aabcc790f1cece0439e65a5e Mon Sep 17 00:00:00 2001
From: Sandeep Paulraj <s-paulraj@ti.com>
Date: Sat, 20 Jun 2009 12:11:09 -0400
Subject: davinci: dm365: add mux entries for EDMA, RTC, EMAC, keypad.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/dm365.c            | 13 +++++++++++++
 arch/arm/mach-davinci/include/mach/mux.h |  5 +++++
 2 files changed, 18 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 69d35d94776..c9ae97a476a 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -530,6 +530,19 @@ MUX_CFG(DM365,  EMAC_RX_ER,	3,   3,     1,    1,     false)
 MUX_CFG(DM365,  EMAC_CRS,	3,   2,     1,    1,     false)
 MUX_CFG(DM365,  EMAC_MDIO,	3,   1,     1,    1,     false)
 MUX_CFG(DM365,  EMAC_MDCLK,	3,   0,     1,    1,     false)
+
+MUX_CFG(DM365,	KEYPAD,		2,   0,     0x3f, 0x3f,  false)
+
+INT_CFG(DM365,  INT_EDMA_CC,         2,     1,    1,     false)
+INT_CFG(DM365,  INT_EDMA_TC0_ERR,    3,     1,    1,     false)
+INT_CFG(DM365,  INT_EDMA_TC1_ERR,    4,     1,    1,     false)
+INT_CFG(DM365,  INT_EDMA_TC2_ERR,    22,    1,    1,     false)
+INT_CFG(DM365,  INT_EDMA_TC3_ERR,    23,    1,    1,     false)
+INT_CFG(DM365,  INT_PRTCSS,          10,    1,    1,     false)
+INT_CFG(DM365,  INT_EMAC_RXTHRESH,   14,    1,    1,     false)
+INT_CFG(DM365,  INT_EMAC_RXPULSE,    15,    1,    1,     false)
+INT_CFG(DM365,  INT_EMAC_TXPULSE,    16,    1,    1,     false)
+INT_CFG(DM365,  INT_EMAC_MISCPULSE,  17,    1,    1,     false)
 #endif
 };
 
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index c182bd458d7..55765e1fdb7 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -221,10 +221,15 @@ enum davinci_dm365_index {
 	DM365_EMAC_MDIO,
 	DM365_EMAC_MDCLK,
 
+	/* Keypad */
+	DM365_KEYPAD,
+
 	/* IRQ muxing */
 	DM365_INT_EDMA_CC,
 	DM365_INT_EDMA_TC0_ERR,
 	DM365_INT_EDMA_TC1_ERR,
+	DM365_INT_EDMA_TC2_ERR,
+	DM365_INT_EDMA_TC3_ERR,
 	DM365_INT_PRTCSS,
 	DM365_INT_EMAC_RXTHRESH,
 	DM365_INT_EMAC_RXPULSE,
-- 
cgit v1.2.3


From 8ed0a9d4e7cfff439f95d08c882841f25a12bf54 Mon Sep 17 00:00:00 2001
From: Sandeep Paulraj <s-paulraj@ti.com>
Date: Sat, 20 Jun 2009 12:23:39 -0400
Subject: davinci: dm365: EMAC support for SoC and dm365 EVM

The patch adds Support for EMAC in the DM365 SOC and
the DM365 EVM board.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-dm365-evm.c | 66 ++++++++++++++++++++++++++++++++-
 arch/arm/mach-davinci/dm365.c           | 58 +++++++++++++++++++++++++++++
 2 files changed, 122 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 08c2f12d03d..9dda3999c8f 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -19,12 +19,12 @@
 #include <linux/i2c.h>
 #include <linux/io.h>
 #include <linux/clk.h>
-
+#include <linux/i2c/at24.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-
+#include <mach/mux.h>
 #include <mach/hardware.h>
 #include <mach/dm365.h>
 #include <mach/psc.h>
@@ -34,14 +34,69 @@
 #include <mach/serial.h>
 #include <mach/common.h>
 
+#define DM365_EVM_PHY_MASK		(0x2)
+#define DM365_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
+
+static struct at24_platform_data eeprom_info = {
+	.byte_len       = (256*1024) / 8,
+	.page_size      = 64,
+	.flags          = AT24_FLAG_ADDR16,
+	.setup          = davinci_get_mac_addr,
+	.context	= (void *)0x7f00,
+};
+
+static struct i2c_board_info i2c_info[] = {
+	{
+		I2C_BOARD_INFO("24c256", 0x50),
+		.platform_data	= &eeprom_info,
+	},
+};
+
 static struct davinci_i2c_platform_data i2c_pdata = {
 	.bus_freq	= 400	/* kHz */,
 	.bus_delay	= 0	/* usec */,
 };
 
+static void dm365evm_emac_configure(void)
+{
+	/*
+	 * EMAC pins are multiplexed with GPIO and UART
+	 * Further details are available at the DM365 ARM
+	 * Subsystem Users Guide(sprufg5.pdf) pages 125 - 127
+	 */
+	davinci_cfg_reg(DM365_EMAC_TX_EN);
+	davinci_cfg_reg(DM365_EMAC_TX_CLK);
+	davinci_cfg_reg(DM365_EMAC_COL);
+	davinci_cfg_reg(DM365_EMAC_TXD3);
+	davinci_cfg_reg(DM365_EMAC_TXD2);
+	davinci_cfg_reg(DM365_EMAC_TXD1);
+	davinci_cfg_reg(DM365_EMAC_TXD0);
+	davinci_cfg_reg(DM365_EMAC_RXD3);
+	davinci_cfg_reg(DM365_EMAC_RXD2);
+	davinci_cfg_reg(DM365_EMAC_RXD1);
+	davinci_cfg_reg(DM365_EMAC_RXD0);
+	davinci_cfg_reg(DM365_EMAC_RX_CLK);
+	davinci_cfg_reg(DM365_EMAC_RX_DV);
+	davinci_cfg_reg(DM365_EMAC_RX_ER);
+	davinci_cfg_reg(DM365_EMAC_CRS);
+	davinci_cfg_reg(DM365_EMAC_MDIO);
+	davinci_cfg_reg(DM365_EMAC_MDCLK);
+
+	/*
+	 * EMAC interrupts are multiplexed with GPIO interrupts
+	 * Details are available at the DM365 ARM
+	 * Subsystem Users Guide(sprufg5.pdf) pages 133 - 134
+	 */
+	davinci_cfg_reg(DM365_INT_EMAC_RXTHRESH);
+	davinci_cfg_reg(DM365_INT_EMAC_RXPULSE);
+	davinci_cfg_reg(DM365_INT_EMAC_TXPULSE);
+	davinci_cfg_reg(DM365_INT_EMAC_MISCPULSE);
+}
+
 static void __init evm_init_i2c(void)
 {
 	davinci_init_i2c(&i2c_pdata);
+	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
 }
 
 static struct davinci_uart_config uart_config __initdata = {
@@ -55,8 +110,15 @@ static void __init dm365_evm_map_io(void)
 
 static __init void dm365_evm_init(void)
 {
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
 	evm_init_i2c();
 	davinci_serial_init(&uart_config);
+
+	dm365evm_emac_configure();
+
+	soc_info->emac_pdata->phy_mask = DM365_EVM_PHY_MASK;
+	soc_info->emac_pdata->mdio_max_freq = DM365_EVM_MDIO_FREQUENCY;
 }
 
 static __init void dm365_evm_irq_init(void)
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index c9ae97a476a..9d615db4463 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -546,6 +546,52 @@ INT_CFG(DM365,  INT_EMAC_MISCPULSE,  17,    1,    1,     false)
 #endif
 };
 
+static struct emac_platform_data dm365_emac_pdata = {
+	.ctrl_reg_offset	= DM365_EMAC_CNTRL_OFFSET,
+	.ctrl_mod_reg_offset	= DM365_EMAC_CNTRL_MOD_OFFSET,
+	.ctrl_ram_offset	= DM365_EMAC_CNTRL_RAM_OFFSET,
+	.mdio_reg_offset	= DM365_EMAC_MDIO_OFFSET,
+	.ctrl_ram_size		= DM365_EMAC_CNTRL_RAM_SIZE,
+	.version		= EMAC_VERSION_2,
+};
+
+static struct resource dm365_emac_resources[] = {
+	{
+		.start	= DM365_EMAC_BASE,
+		.end	= DM365_EMAC_BASE + 0x47ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_DM365_EMAC_RXTHRESH,
+		.end	= IRQ_DM365_EMAC_RXTHRESH,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_EMAC_RXPULSE,
+		.end	= IRQ_DM365_EMAC_RXPULSE,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_EMAC_TXPULSE,
+		.end	= IRQ_DM365_EMAC_TXPULSE,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_EMAC_MISCPULSE,
+		.end	= IRQ_DM365_EMAC_MISCPULSE,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dm365_emac_device = {
+	.name		= "davinci_emac",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &dm365_emac_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(dm365_emac_resources),
+	.resource	= dm365_emac_resources,
+};
 
 static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 	[IRQ_VDINT0]			= 2,
@@ -702,6 +748,7 @@ static struct davinci_soc_info davinci_soc_info_dm365 = {
 	.gpio_num		= 104,
 	.gpio_irq		= 44,
 	.serial_dev		= &dm365_serial_device,
+	.emac_pdata		= &dm365_emac_pdata,
 	.sram_dma		= 0x00010000,
 	.sram_len		= SZ_32K,
 };
@@ -710,3 +757,14 @@ void __init dm365_init(void)
 {
 	davinci_common_init(&davinci_soc_info_dm365);
 }
+
+static int __init dm365_init_devices(void)
+{
+	if (!cpu_is_davinci_dm365())
+		return 0;
+
+	platform_device_register(&dm365_emac_device);
+
+	return 0;
+}
+postcore_initcall(dm365_init_devices);
-- 
cgit v1.2.3


From 15061b5d02ad461620ab7b09d48374fad0e57649 Mon Sep 17 00:00:00 2001
From: Sandeep Paulraj <s-paulraj@ti.com>
Date: Sat, 20 Jun 2009 13:15:39 -0400
Subject: davinci: dm365: add EDMA support

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/dm365.c | 87 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 87 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 9d615db4463..c52aad30084 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -660,6 +660,91 @@ static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 	[IRQ_DM365_EMUINT]		= 7,
 };
 
+/* Four Transfer Controllers on DM365 */
+static const s8
+dm365_queue_tc_mapping[][2] = {
+	/* {event queue no, TC no} */
+	{0, 0},
+	{1, 1},
+	{2, 2},
+	{3, 3},
+	{-1, -1},
+};
+
+static const s8
+dm365_queue_priority_mapping[][2] = {
+	/* {event queue no, Priority} */
+	{0, 7},
+	{1, 7},
+	{2, 7},
+	{3, 0},
+	{-1, -1},
+};
+
+static struct edma_soc_info dm365_edma_info[] = {
+	{
+		.n_channel		= 64,
+		.n_region		= 4,
+		.n_slot			= 256,
+		.n_tc			= 4,
+		.n_cc			= 1,
+		.queue_tc_mapping	= dm365_queue_tc_mapping,
+		.queue_priority_mapping	= dm365_queue_priority_mapping,
+	},
+};
+
+static struct resource edma_resources[] = {
+	{
+		.name	= "edma_cc0",
+		.start	= 0x01c00000,
+		.end	= 0x01c00000 + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc0",
+		.start	= 0x01c10000,
+		.end	= 0x01c10000 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc1",
+		.start	= 0x01c10400,
+		.end	= 0x01c10400 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc2",
+		.start	= 0x01c10800,
+		.end	= 0x01c10800 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc3",
+		.start	= 0x01c10c00,
+		.end	= 0x01c10c00 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma0",
+		.start	= IRQ_CCINT0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.name	= "edma0_err",
+		.start	= IRQ_CCERRINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	/* not using TC*_ERR */
+};
+
+static struct platform_device dm365_edma_device = {
+	.name			= "edma",
+	.id			= 0,
+	.dev.platform_data	= dm365_edma_info,
+	.num_resources		= ARRAY_SIZE(edma_resources),
+	.resource		= edma_resources,
+};
+
 static struct map_desc dm365_io_desc[] = {
 	{
 		.virtual	= IO_VIRT,
@@ -763,6 +848,8 @@ static int __init dm365_init_devices(void)
 	if (!cpu_is_davinci_dm365())
 		return 0;
 
+	davinci_cfg_reg(DM365_INT_EDMA_CC);
+	platform_device_register(&dm365_edma_device);
 	platform_device_register(&dm365_emac_device);
 
 	return 0;
-- 
cgit v1.2.3


From 19ff3bf2e8473c03bb80052728bfa91c0fdf10f8 Mon Sep 17 00:00:00 2001
From: Sandeep Paulraj <s-paulraj@ti.com>
Date: Sat, 20 Jun 2009 13:58:32 -0400
Subject: davinci: dm365: add MMC/SD support

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/devices.c | 45 ++++++++++++++++++++++++++++-------------
 1 file changed, 31 insertions(+), 14 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index 385e8332fc2..a55b650db71 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -31,6 +31,8 @@
 #define DAVINCI_MMCSD0_BASE	     0x01E10000
 #define DM355_MMCSD0_BASE	     0x01E11000
 #define DM355_MMCSD1_BASE	     0x01E00000
+#define DM365_MMCSD0_BASE	     0x01D11000
+#define DM365_MMCSD1_BASE	     0x01D00000
 
 static struct resource i2c_resources[] = {
 	{
@@ -154,19 +156,31 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
 	 */
 	switch (module) {
 	case 1:
-		if (!cpu_is_davinci_dm355())
+		if (cpu_is_davinci_dm355()) {
+			/* REVISIT we may not need all these pins if e.g. this
+			 * is a hard-wired SDIO device...
+			 */
+			davinci_cfg_reg(DM355_SD1_CMD);
+			davinci_cfg_reg(DM355_SD1_CLK);
+			davinci_cfg_reg(DM355_SD1_DATA0);
+			davinci_cfg_reg(DM355_SD1_DATA1);
+			davinci_cfg_reg(DM355_SD1_DATA2);
+			davinci_cfg_reg(DM355_SD1_DATA3);
+		} else if (cpu_is_davinci_dm365()) {
+			void __iomem *pupdctl1 =
+				IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE + 0x7c);
+
+			/* Configure pull down control */
+			__raw_writel((__raw_readl(pupdctl1) & ~0x400),
+					pupdctl1);
+
+			mmcsd1_resources[0].start = DM365_MMCSD1_BASE;
+			mmcsd1_resources[0].end = DM365_MMCSD1_BASE +
+							SZ_4K - 1;
+			mmcsd0_resources[2].start = IRQ_DM365_SDIOINT1;
+		} else
 			break;
 
-		/* REVISIT we may not need all these pins if e.g. this
-		 * is a hard-wired SDIO device...
-		 */
-		davinci_cfg_reg(DM355_SD1_CMD);
-		davinci_cfg_reg(DM355_SD1_CLK);
-		davinci_cfg_reg(DM355_SD1_DATA0);
-		davinci_cfg_reg(DM355_SD1_DATA1);
-		davinci_cfg_reg(DM355_SD1_DATA2);
-		davinci_cfg_reg(DM355_SD1_DATA3);
-
 		pdev = &davinci_mmcsd1_device;
 		break;
 	case 0:
@@ -180,9 +194,12 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
 
 			/* enable RX EDMA */
 			davinci_cfg_reg(DM355_EVT26_MMC0_RX);
-		}
-
-		else if (cpu_is_davinci_dm644x()) {
+		} else if (cpu_is_davinci_dm365()) {
+			mmcsd0_resources[0].start = DM365_MMCSD0_BASE;
+			mmcsd0_resources[0].end = DM365_MMCSD0_BASE +
+							SZ_4K - 1;
+			mmcsd0_resources[2].start = IRQ_DM365_SDIOINT0;
+		} else if (cpu_is_davinci_dm644x()) {
 			/* REVISIT: should this be in board-init code? */
 			void __iomem *base =
 				IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
-- 
cgit v1.2.3


From a45c8ba30bca0c3257785cae28680781fd356a85 Mon Sep 17 00:00:00 2001
From: Sandeep Paulraj <s-paulraj@ti.com>
Date: Sat, 20 Jun 2009 14:00:52 -0400
Subject: davinci: MMC/SD Support for dm365 EVM

Patch adds support for MMC/SD in the DM365 EVM.
Pinmux for MMC/SD slot 1 on the DM365 EVM is also
configured.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-dm365-evm.c | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 9dda3999c8f..e62d1ab3bb2 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -33,6 +33,7 @@
 #include <linux/i2c.h>
 #include <mach/serial.h>
 #include <mach/common.h>
+#include <mach/mmc.h>
 
 #define DM365_EVM_PHY_MASK		(0x2)
 #define DM365_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
@@ -57,6 +58,13 @@ static struct davinci_i2c_platform_data i2c_pdata = {
 	.bus_delay	= 0	/* usec */,
 };
 
+static struct davinci_mmc_config dm365evm_mmc_config = {
+	.wires		= 4,
+	.max_freq	= 50000000,
+	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
+	.version	= MMC_CTLR_VERSION_2,
+};
+
 static void dm365evm_emac_configure(void)
 {
 	/*
@@ -93,6 +101,21 @@ static void dm365evm_emac_configure(void)
 	davinci_cfg_reg(DM365_INT_EMAC_MISCPULSE);
 }
 
+static void dm365evm_mmc_configure(void)
+{
+	/*
+	 * MMC/SD pins are multiplexed with GPIO and EMIF
+	 * Further details are available at the DM365 ARM
+	 * Subsystem Users Guide(sprufg5.pdf) pages 118, 128 - 131
+	 */
+	davinci_cfg_reg(DM365_SD1_CLK);
+	davinci_cfg_reg(DM365_SD1_CMD);
+	davinci_cfg_reg(DM365_SD1_DATA3);
+	davinci_cfg_reg(DM365_SD1_DATA2);
+	davinci_cfg_reg(DM365_SD1_DATA1);
+	davinci_cfg_reg(DM365_SD1_DATA0);
+}
+
 static void __init evm_init_i2c(void)
 {
 	davinci_init_i2c(&i2c_pdata);
@@ -116,6 +139,10 @@ static __init void dm365_evm_init(void)
 	davinci_serial_init(&uart_config);
 
 	dm365evm_emac_configure();
+	dm365evm_mmc_configure();
+
+	davinci_setup_mmc(0, &dm365evm_mmc_config);
+	davinci_setup_mmc(1, &dm365evm_mmc_config);
 
 	soc_info->emac_pdata->phy_mask = DM365_EVM_PHY_MASK;
 	soc_info->emac_pdata->mdio_max_freq = DM365_EVM_MDIO_FREQUENCY;
-- 
cgit v1.2.3


From 37b798da5df377521a8cd32a82467aa2d431f33e Mon Sep 17 00:00:00 2001
From: Sandeep Paulraj <s-paulraj@ti.com>
Date: Sat, 20 Jun 2009 14:15:51 -0400
Subject: davinci: dm365: add NAND support to EVM board

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-dm365-evm.c | 84 +++++++++++++++++++++++++++++++++
 1 file changed, 84 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index e62d1ab3bb2..3675e844b9b 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -20,6 +20,9 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/i2c/at24.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -34,10 +37,84 @@
 #include <mach/serial.h>
 #include <mach/common.h>
 #include <mach/mmc.h>
+#include <mach/nand.h>
+
+#define DM365_ASYNC_EMIF_CONTROL_BASE	0x01d10000
+#define DM365_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
 
 #define DM365_EVM_PHY_MASK		(0x2)
 #define DM365_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
 
+/* NOTE:  this is geared for the standard config, with a socketed
+ * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors.  If you
+ * swap chips with a different block size, partitioning will
+ * need to be changed. This NAND chip MT29F16G08FAA is the default
+ * NAND shipped with the Spectrum Digital DM365 EVM
+ */
+#define NAND_BLOCK_SIZE		SZ_128K
+
+static struct mtd_partition davinci_nand_partitions[] = {
+	{
+		/* UBL (a few copies) plus U-Boot */
+		.name		= "bootloader",
+		.offset		= 0,
+		.size		= 28 * NAND_BLOCK_SIZE,
+		.mask_flags	= MTD_WRITEABLE, /* force read-only */
+	}, {
+		/* U-Boot environment */
+		.name		= "params",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 2 * NAND_BLOCK_SIZE,
+		.mask_flags	= 0,
+	}, {
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_4M,
+		.mask_flags	= 0,
+	}, {
+		.name		= "filesystem1",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_512M,
+		.mask_flags	= 0,
+	}, {
+		.name		= "filesystem2",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0,
+	}
+	/* two blocks with bad block table (and mirror) at the end */
+};
+
+static struct davinci_nand_pdata davinci_nand_data = {
+	.mask_chipsel		= BIT(14),
+	.parts			= davinci_nand_partitions,
+	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
+	.ecc_mode		= NAND_ECC_HW,
+	.options		= NAND_USE_FLASH_BBT,
+};
+
+static struct resource davinci_nand_resources[] = {
+	{
+		.start		= DM365_ASYNC_EMIF_DATA_CE0_BASE,
+		.end		= DM365_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= DM365_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DM365_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device davinci_nand_device = {
+	.name			= "davinci_nand",
+	.id			= 0,
+	.num_resources		= ARRAY_SIZE(davinci_nand_resources),
+	.resource		= davinci_nand_resources,
+	.dev			= {
+		.platform_data	= &davinci_nand_data,
+	},
+};
+
 static struct at24_platform_data eeprom_info = {
 	.byte_len       = (256*1024) / 8,
 	.page_size      = 64,
@@ -122,6 +199,10 @@ static void __init evm_init_i2c(void)
 	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
 }
 
+static struct platform_device *dm365_evm_devices[] __initdata = {
+	&davinci_nand_device,
+};
+
 static struct davinci_uart_config uart_config __initdata = {
 	.enabled_uarts = (1 << 0),
 };
@@ -135,6 +216,9 @@ static __init void dm365_evm_init(void)
 {
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
+	platform_add_devices(dm365_evm_devices,
+				ARRAY_SIZE(dm365_evm_devices));
+
 	evm_init_i2c();
 	davinci_serial_init(&uart_config);
 
-- 
cgit v1.2.3


From ff255c6caa389c90c68f5421f60ebfc40b68ea1b Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Sun, 21 Jun 2009 14:50:12 -0700
Subject: davinci: dm365 evm cpld support: leds, card detect, other setup

Add basic support for the CPLD on the DM365 EVM board:

 - Read SW5 to set up NAND and keypad vs (someday) OneNAND
 - Export MMC/SD card detect and writeprotect signals
 - LED support (same layout as on DM355 EVM)
 - Static config for video input:
     * external HD imager precludes MMC1, Ethernet, audio
     * else either tvp5146 (SD/default) or tvp7002 (HD)

The video input could actually be switched around dynamically;
change that if/when that's needed (and after those other video
inputs have driver support).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-dm365-evm.c | 263 ++++++++++++++++++++++++++++++--
 1 file changed, 253 insertions(+), 10 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 3675e844b9b..a1d5e7dac74 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -20,6 +20,7 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/i2c/at24.h>
+#include <linux/leds.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
@@ -33,18 +34,71 @@
 #include <mach/psc.h>
 #include <mach/common.h>
 #include <mach/i2c.h>
-#include <linux/i2c.h>
 #include <mach/serial.h>
 #include <mach/common.h>
 #include <mach/mmc.h>
 #include <mach/nand.h>
 
+
+static inline int have_imager(void)
+{
+	/* REVISIT when it's supported, trigger via Kconfig */
+	return 0;
+}
+
+static inline int have_tvp7002(void)
+{
+	/* REVISIT when it's supported, trigger via Kconfig */
+	return 0;
+}
+
+
 #define DM365_ASYNC_EMIF_CONTROL_BASE	0x01d10000
 #define DM365_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
+#define DM365_ASYNC_EMIF_DATA_CE1_BASE	0x04000000
 
 #define DM365_EVM_PHY_MASK		(0x2)
 #define DM365_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
 
+/*
+ * A MAX-II CPLD is used for various board control functions.
+ */
+#define CPLD_OFFSET(a13a8,a2a1)		(((a13a8) << 10) + ((a2a1) << 3))
+
+#define CPLD_VERSION	CPLD_OFFSET(0,0)	/* r/o */
+#define CPLD_TEST	CPLD_OFFSET(0,1)
+#define CPLD_LEDS	CPLD_OFFSET(0,2)
+#define CPLD_MUX	CPLD_OFFSET(0,3)
+#define CPLD_SWITCH	CPLD_OFFSET(1,0)	/* r/o */
+#define CPLD_POWER	CPLD_OFFSET(1,1)
+#define CPLD_VIDEO	CPLD_OFFSET(1,2)
+#define CPLD_CARDSTAT	CPLD_OFFSET(1,3)	/* r/o */
+
+#define CPLD_DILC_OUT	CPLD_OFFSET(2,0)
+#define CPLD_DILC_IN	CPLD_OFFSET(2,1)	/* r/o */
+
+#define CPLD_IMG_DIR0	CPLD_OFFSET(2,2)
+#define CPLD_IMG_MUX0	CPLD_OFFSET(2,3)
+#define CPLD_IMG_MUX1	CPLD_OFFSET(3,0)
+#define CPLD_IMG_DIR1	CPLD_OFFSET(3,1)
+#define CPLD_IMG_MUX2	CPLD_OFFSET(3,2)
+#define CPLD_IMG_MUX3	CPLD_OFFSET(3,3)
+#define CPLD_IMG_DIR2	CPLD_OFFSET(4,0)
+#define CPLD_IMG_MUX4	CPLD_OFFSET(4,1)
+#define CPLD_IMG_MUX5	CPLD_OFFSET(4,2)
+
+#define CPLD_RESETS	CPLD_OFFSET(4,3)
+
+#define CPLD_CCD_DIR1	CPLD_OFFSET(0x3e,0)
+#define CPLD_CCD_IO1	CPLD_OFFSET(0x3e,1)
+#define CPLD_CCD_DIR2	CPLD_OFFSET(0x3e,2)
+#define CPLD_CCD_IO2	CPLD_OFFSET(0x3e,3)
+#define CPLD_CCD_DIR3	CPLD_OFFSET(0x3f,0)
+#define CPLD_CCD_IO3	CPLD_OFFSET(0x3f,1)
+
+static void __iomem *cpld;
+
+
 /* NOTE:  this is geared for the standard config, with a socketed
  * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors.  If you
  * swap chips with a different block size, partitioning will
@@ -135,7 +189,27 @@ static struct davinci_i2c_platform_data i2c_pdata = {
 	.bus_delay	= 0	/* usec */,
 };
 
+static int cpld_mmc_get_cd(int module)
+{
+	if (!cpld)
+		return -ENXIO;
+
+	/* low == card present */
+	return !(__raw_readb(cpld + CPLD_CARDSTAT) & BIT(module ? 4 : 0));
+}
+
+static int cpld_mmc_get_ro(int module)
+{
+	if (!cpld)
+		return -ENXIO;
+
+	/* high == card's write protect switch active */
+	return !!(__raw_readb(cpld + CPLD_CARDSTAT) & BIT(module ? 5 : 1));
+}
+
 static struct davinci_mmc_config dm365evm_mmc_config = {
+	.get_cd		= cpld_mmc_get_cd,
+	.get_ro		= cpld_mmc_get_ro,
 	.wires		= 4,
 	.max_freq	= 50000000,
 	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
@@ -199,10 +273,185 @@ static void __init evm_init_i2c(void)
 	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
 }
 
-static struct platform_device *dm365_evm_devices[] __initdata = {
+static struct platform_device *dm365_evm_nand_devices[] __initdata = {
 	&davinci_nand_device,
 };
 
+static inline int have_leds(void)
+{
+#ifdef CONFIG_LEDS_CLASS
+	return 1;
+#else
+	return 0;
+#endif
+}
+
+struct cpld_led {
+	struct led_classdev	cdev;
+	u8			mask;
+};
+
+static const struct {
+	const char *name;
+	const char *trigger;
+} cpld_leds[] = {
+	{ "dm365evm::ds2", },
+	{ "dm365evm::ds3", },
+	{ "dm365evm::ds4", },
+	{ "dm365evm::ds5", },
+	{ "dm365evm::ds6", "nand-disk", },
+	{ "dm365evm::ds7", "mmc1", },
+	{ "dm365evm::ds8", "mmc0", },
+	{ "dm365evm::ds9", "heartbeat", },
+};
+
+static void cpld_led_set(struct led_classdev *cdev, enum led_brightness b)
+{
+	struct cpld_led *led = container_of(cdev, struct cpld_led, cdev);
+	u8 reg = __raw_readb(cpld + CPLD_LEDS);
+
+	if (b != LED_OFF)
+		reg &= ~led->mask;
+	else
+		reg |= led->mask;
+	__raw_writeb(reg, cpld + CPLD_LEDS);
+}
+
+static enum led_brightness cpld_led_get(struct led_classdev *cdev)
+{
+	struct cpld_led *led = container_of(cdev, struct cpld_led, cdev);
+	u8 reg = __raw_readb(cpld + CPLD_LEDS);
+
+	return (reg & led->mask) ? LED_OFF : LED_FULL;
+}
+
+static int __init cpld_leds_init(void)
+{
+	int	i;
+
+	if (!have_leds() ||  !cpld)
+		return 0;
+
+	/* setup LEDs */
+	__raw_writeb(0xff, cpld + CPLD_LEDS);
+	for (i = 0; i < ARRAY_SIZE(cpld_leds); i++) {
+		struct cpld_led *led;
+
+		led = kzalloc(sizeof(*led), GFP_KERNEL);
+		if (!led)
+			break;
+
+		led->cdev.name = cpld_leds[i].name;
+		led->cdev.brightness_set = cpld_led_set;
+		led->cdev.brightness_get = cpld_led_get;
+		led->cdev.default_trigger = cpld_leds[i].trigger;
+		led->mask = BIT(i);
+
+		if (led_classdev_register(NULL, &led->cdev) < 0) {
+			kfree(led);
+			break;
+		}
+	}
+
+	return 0;
+}
+/* run after subsys_initcall() for LEDs */
+fs_initcall(cpld_leds_init);
+
+
+static void __init evm_init_cpld(void)
+{
+	u8 mux, resets;
+	const char *label;
+	struct clk *aemif_clk;
+
+	/* Make sure we can configure the CPLD through CS1.  Then
+	 * leave it on for later access to MMC and LED registers.
+	 */
+	aemif_clk = clk_get(NULL, "aemif");
+	if (IS_ERR(aemif_clk))
+		return;
+	clk_enable(aemif_clk);
+
+	if (request_mem_region(DM365_ASYNC_EMIF_DATA_CE1_BASE, SECTION_SIZE,
+			"cpld") == NULL)
+		goto fail;
+	cpld = ioremap(DM365_ASYNC_EMIF_DATA_CE1_BASE, SECTION_SIZE);
+	if (!cpld) {
+		release_mem_region(DM365_ASYNC_EMIF_DATA_CE1_BASE,
+				SECTION_SIZE);
+fail:
+		pr_err("ERROR: can't map CPLD\n");
+		clk_disable(aemif_clk);
+		return;
+	}
+
+	/* External muxing for some signals */
+	mux = 0;
+
+	/* Read SW5 to set up NAND + keypad _or_ OneNAND (sync read).
+	 * NOTE:  SW4 bus width setting must match!
+	 */
+	if ((__raw_readb(cpld + CPLD_SWITCH) & BIT(5)) == 0) {
+		/* external keypad mux */
+		mux |= BIT(7);
+
+		platform_add_devices(dm365_evm_nand_devices,
+				ARRAY_SIZE(dm365_evm_nand_devices));
+	} else {
+		/* no OneNAND support yet */
+	}
+
+	/* Leave external chips in reset when unused. */
+	resets = BIT(3) | BIT(2) | BIT(1) | BIT(0);
+
+	/* Static video input config with SN74CBT16214 1-of-3 mux:
+	 *  - port b1 == tvp7002 (mux lowbits == 1 or 6)
+	 *  - port b2 == imager (mux lowbits == 2 or 7)
+	 *  - port b3 == tvp5146 (mux lowbits == 5)
+	 *
+	 * Runtime switching could work too, with limitations.
+	 */
+	if (have_imager()) {
+		label = "HD imager";
+		mux |= 1;
+
+		/* externally mux MMC1/ENET/AIC33 to imager */
+		mux |= BIT(6) | BIT(5) | BIT(3);
+	} else {
+		struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+		/* we can use MMC1 ... */
+		dm365evm_mmc_configure();
+		davinci_setup_mmc(1, &dm365evm_mmc_config);
+
+		/* ... and ENET ... */
+		dm365evm_emac_configure();
+		soc_info->emac_pdata->phy_mask = DM365_EVM_PHY_MASK;
+		soc_info->emac_pdata->mdio_max_freq = DM365_EVM_MDIO_FREQUENCY;
+		resets &= ~BIT(3);
+
+		/* ... and AIC33 */
+		resets &= ~BIT(1);
+
+		if (have_tvp7002()) {
+			mux |= 2;
+			resets &= ~BIT(2);
+			label = "tvp7002 HD";
+		} else {
+			/* default to tvp5146 */
+			mux |= 5;
+			resets &= ~BIT(0);
+			label = "tvp5146 SD";
+		}
+	}
+	__raw_writeb(mux, cpld + CPLD_MUX);
+	__raw_writeb(resets, cpld + CPLD_RESETS);
+	pr_info("EVM: %s video input\n", label);
+
+	/* REVISIT export switches: NTSC/PAL (SW5.6), EXTRA1 (SW5.2), etc */
+}
+
 static struct davinci_uart_config uart_config __initdata = {
 	.enabled_uarts = (1 << 0),
 };
@@ -214,11 +463,6 @@ static void __init dm365_evm_map_io(void)
 
 static __init void dm365_evm_init(void)
 {
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	platform_add_devices(dm365_evm_devices,
-				ARRAY_SIZE(dm365_evm_devices));
-
 	evm_init_i2c();
 	davinci_serial_init(&uart_config);
 
@@ -226,10 +470,9 @@ static __init void dm365_evm_init(void)
 	dm365evm_mmc_configure();
 
 	davinci_setup_mmc(0, &dm365evm_mmc_config);
-	davinci_setup_mmc(1, &dm365evm_mmc_config);
 
-	soc_info->emac_pdata->phy_mask = DM365_EVM_PHY_MASK;
-	soc_info->emac_pdata->mdio_max_freq = DM365_EVM_MDIO_FREQUENCY;
+	/* maybe setup mmc1/etc ... _after_ mmc0 */
+	evm_init_cpld();
 }
 
 static __init void dm365_evm_irq_init(void)
-- 
cgit v1.2.3


From 55c79a40e34566e9d198f6205b0cf06e3d89ac0a Mon Sep 17 00:00:00 2001
From: "Mark A. Greer" <mgreer@mvista.com>
Date: Wed, 3 Jun 2009 18:36:54 -0700
Subject: davinci: da8xx: Add base DA830/OMAP-L137 SoC support

The da830/omap l137 is a new SoC from TI that is similar
to the davinci line.  Since its so similar to davinci,
put the support for the da830 in the same directory as
the davinci code.

There are differences, however.  Some of those differences
prevent support for davinci and da830 platforms to work
in the same kernel binary.  Those differences are:

1) Different physical address for RAM.  This is relevant
   to Makefile.boot addresses and PHYS_OFFSET.  The
   Makefile.boot issue isn't truly a kernel issue but
   it means u-boot won't work with a uImage including
   both architectures.  The PHYS_OFFSET issue is
   addressed by the "Allow for runtime-determined
   PHYS_OFFSET" patch by Lennert Buytenhek but it
   hasn't been accepted yet.

2) Different uart addresses.  This is only an issue
   for the 'addruart' assembly macro when CONFIG_DEBUG_LL
   is enabled.  Since the code in that macro is called
   so early (e.g., by _error_p in kernel/head.S when
   the processor lookup fails), we can't determine what
   platform the kernel is running on at runtime to use
   the correct uart address.

These areas have compile errors intentionally inserted
to indicate to the builder they're doing something wrong.

A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added
to distinguish between a true davinci architecture and
the da830 architecture.

Note that the da830 currently has an issue with writeback
data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be
enabled when building a da830 kernel.

Additional generalizations for future SoCs in the da8xx family done by
Sudhakar Rajashekhara and Sekhar Nori.

Signed-off-by: Steve Chen <schen@mvista.com>
Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com>
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Cc: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/Kconfig                |   14 +
 arch/arm/mach-davinci/Makefile               |   11 +-
 arch/arm/mach-davinci/Makefile.boot          |   10 +
 arch/arm/mach-davinci/da830.c                | 1247 ++++++++++++++++++++++++++
 arch/arm/mach-davinci/devices-da8xx.c        |  287 ++++++
 arch/arm/mach-davinci/include/mach/cputype.h |    8 +
 arch/arm/mach-davinci/include/mach/da8xx.h   |   69 ++
 arch/arm/mach-davinci/include/mach/edma.h    |   48 +
 arch/arm/mach-davinci/include/mach/irqs.h    |  109 ++-
 arch/arm/mach-davinci/include/mach/memory.h  |    9 +-
 arch/arm/mach-davinci/include/mach/mux.h     |  404 +++++++++
 arch/arm/mach-davinci/include/mach/psc.h     |   41 +
 arch/arm/mach-davinci/include/mach/serial.h  |    4 +
 13 files changed, 2252 insertions(+), 9 deletions(-)
 create mode 100644 arch/arm/mach-davinci/da830.c
 create mode 100644 arch/arm/mach-davinci/devices-da8xx.c
 create mode 100644 arch/arm/mach-davinci/include/mach/da8xx.h

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index b16f5e31c08..312228ed848 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -6,6 +6,9 @@ config AINTC
 config CP_INTC
 	bool
 
+config ARCH_DAVINCI_DMx
+	bool
+
 menu "TI DaVinci Implementations"
 
 comment "DaVinci Core Type"
@@ -13,14 +16,25 @@ comment "DaVinci Core Type"
 config ARCH_DAVINCI_DM644x
 	bool "DaVinci 644x based system"
 	select AINTC
+	select ARCH_DAVINCI_DMx
 
 config ARCH_DAVINCI_DM355
         bool "DaVinci 355 based system"
 	select AINTC
+	select ARCH_DAVINCI_DMx
 
 config ARCH_DAVINCI_DM646x
         bool "DaVinci 646x based system"
 	select AINTC
+	select ARCH_DAVINCI_DMx
+
+config ARCH_DAVINCI_DA830
+        bool "DA830/OMAP-L137 based system"
+	select CP_INTC
+	select ARCH_DAVINCI_DA8XX
+
+config ARCH_DAVINCI_DA8XX
+	bool
 
 config ARCH_DAVINCI_DM365
 	bool "DaVinci 365 based system"
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index bea7ba65b3f..385638c0a71 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -5,15 +5,16 @@
 
 # Common objects
 obj-y 			:= time.o clock.o serial.o io.o psc.o \
-			   gpio.o devices.o dma.o usb.o common.o sram.o
+			   gpio.o dma.o usb.o common.o sram.o
 
 obj-$(CONFIG_DAVINCI_MUX)		+= mux.o
 
 # Chip specific
-obj-$(CONFIG_ARCH_DAVINCI_DM644x)       += dm644x.o
-obj-$(CONFIG_ARCH_DAVINCI_DM355)        += dm355.o
-obj-$(CONFIG_ARCH_DAVINCI_DM646x)       += dm646x.o
-obj-$(CONFIG_ARCH_DAVINCI_DM365)	+= dm365.o
+obj-$(CONFIG_ARCH_DAVINCI_DM644x)       += dm644x.o devices.o
+obj-$(CONFIG_ARCH_DAVINCI_DM355)        += dm355.o devices.o
+obj-$(CONFIG_ARCH_DAVINCI_DM646x)       += dm646x.o devices.o
+obj-$(CONFIG_ARCH_DAVINCI_DM365)	+= dm365.o devices.o
+obj-$(CONFIG_ARCH_DAVINCI_DA830)        += da830.o devices-da8xx.o
 
 obj-$(CONFIG_AINTC)			+= irq.o
 obj-$(CONFIG_CP_INTC)			+= cp_intc.o
diff --git a/arch/arm/mach-davinci/Makefile.boot b/arch/arm/mach-davinci/Makefile.boot
index e1dd366f836..db97ef2c647 100644
--- a/arch/arm/mach-davinci/Makefile.boot
+++ b/arch/arm/mach-davinci/Makefile.boot
@@ -1,3 +1,13 @@
+ifeq ($(CONFIG_ARCH_DAVINCI_DA8XX),y)
+ifeq ($(CONFIG_ARCH_DAVINCI_DMx),y)
+$(error Cannot enable DaVinci and DA8XX platforms concurrently)
+else
+   zreladdr-y	:= 0xc0008000
+params_phys-y	:= 0xc0000100
+initrd_phys-y	:= 0xc0800000
+endif
+else
    zreladdr-y	:= 0x80008000
 params_phys-y	:= 0x80000100
 initrd_phys-y	:= 0x80800000
+endif
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
new file mode 100644
index 00000000000..ab4242869b6
--- /dev/null
+++ b/arch/arm/mach-davinci/da830.c
@@ -0,0 +1,1247 @@
+/*
+ * TI DA830/OMAP L137 chip specific setup
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2009 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/clock.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+#include <mach/irqs.h>
+#include <mach/cputype.h>
+#include <mach/common.h>
+#include <mach/time.h>
+#include <mach/da8xx.h>
+
+#include "clock.h"
+#include "mux.h"
+
+#define DA830_PSC0_BASE		0x01c10000
+#define DA830_PLL0_BASE		0x01c11000
+#define DA830_JTAG_ID_REG	0x01c14018
+#define DA830_TIMER64P0_BASE	0x01c20000
+#define DA830_TIMER64P1_BASE	0x01c21000
+#define DA830_GPIO_BASE		0x01e26000
+#define DA830_PSC1_BASE		0x01e27000
+
+/* Offsets of the 8 compare registers on the da830 */
+#define DA830_CMP12_0		0x60
+#define DA830_CMP12_1		0x64
+#define DA830_CMP12_2		0x68
+#define DA830_CMP12_3		0x6c
+#define DA830_CMP12_4		0x70
+#define DA830_CMP12_5		0x74
+#define DA830_CMP12_6		0x78
+#define DA830_CMP12_7		0x7c
+
+#define DA830_REF_FREQ		24000000
+
+static struct pll_data pll0_data = {
+	.num		= 1,
+	.phys_base	= DA830_PLL0_BASE,
+	.flags		= PLL_HAS_PREDIV | PLL_HAS_POSTDIV,
+};
+
+static struct clk ref_clk = {
+	.name		= "ref_clk",
+	.rate		= DA830_REF_FREQ,
+};
+
+static struct clk pll0_clk = {
+	.name		= "pll0",
+	.parent		= &ref_clk,
+	.pll_data	= &pll0_data,
+	.flags		= CLK_PLL,
+};
+
+static struct clk pll0_aux_clk = {
+	.name		= "pll0_aux_clk",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll0_sysclk2 = {
+	.name		= "pll0_sysclk2",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV2,
+};
+
+static struct clk pll0_sysclk3 = {
+	.name		= "pll0_sysclk3",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV3,
+};
+
+static struct clk pll0_sysclk4 = {
+	.name		= "pll0_sysclk4",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV4,
+};
+
+static struct clk pll0_sysclk5 = {
+	.name		= "pll0_sysclk5",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV5,
+};
+
+static struct clk pll0_sysclk6 = {
+	.name		= "pll0_sysclk6",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV6,
+};
+
+static struct clk pll0_sysclk7 = {
+	.name		= "pll0_sysclk7",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV7,
+};
+
+static struct clk i2c0_clk = {
+	.name		= "i2c0",
+	.parent		= &pll0_aux_clk,
+};
+
+static struct clk timerp64_0_clk = {
+	.name		= "timer0",
+	.parent		= &pll0_aux_clk,
+};
+
+static struct clk timerp64_1_clk = {
+	.name		= "timer1",
+	.parent		= &pll0_aux_clk,
+};
+
+static struct clk arm_rom_clk = {
+	.name		= "arm_rom",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_ARM_RAM_ROM,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk scr0_ss_clk = {
+	.name		= "scr0_ss",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_SCR0_SS,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk scr1_ss_clk = {
+	.name		= "scr1_ss",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_SCR1_SS,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk scr2_ss_clk = {
+	.name		= "scr2_ss",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_SCR2_SS,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk dmax_clk = {
+	.name		= "dmax",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_DMAX,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk tpcc_clk = {
+	.name		= "tpcc",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_TPCC,
+	.flags		= ALWAYS_ENABLED | CLK_PSC,
+};
+
+static struct clk tptc0_clk = {
+	.name		= "tptc0",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_TPTC0,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk tptc1_clk = {
+	.name		= "tptc1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_TPTC1,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk mmcsd_clk = {
+	.name		= "mmcsd",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_MMC_SD,
+};
+
+static struct clk uart0_clk = {
+	.name		= "uart0",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_UART0,
+};
+
+static struct clk uart1_clk = {
+	.name		= "uart1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_UART1,
+	.psc_ctlr	= 1,
+};
+
+static struct clk uart2_clk = {
+	.name		= "uart2",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_UART2,
+	.psc_ctlr	= 1,
+};
+
+static struct clk spi0_clk = {
+	.name		= "spi0",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_SPI0,
+};
+
+static struct clk spi1_clk = {
+	.name		= "spi1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_SPI1,
+	.psc_ctlr	= 1,
+};
+
+static struct clk ecap0_clk = {
+	.name		= "ecap0",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_ECAP,
+	.psc_ctlr	= 1,
+};
+
+static struct clk ecap1_clk = {
+	.name		= "ecap1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_ECAP,
+	.psc_ctlr	= 1,
+};
+
+static struct clk ecap2_clk = {
+	.name		= "ecap2",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_ECAP,
+	.psc_ctlr	= 1,
+};
+
+static struct clk pwm0_clk = {
+	.name		= "pwm0",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_PWM,
+	.psc_ctlr	= 1,
+};
+
+static struct clk pwm1_clk = {
+	.name		= "pwm1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_PWM,
+	.psc_ctlr	= 1,
+};
+
+static struct clk pwm2_clk = {
+	.name		= "pwm2",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_PWM,
+	.psc_ctlr	= 1,
+};
+
+static struct clk eqep0_clk = {
+	.name		= "eqep0",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA830_LPSC1_EQEP,
+	.psc_ctlr	= 1,
+};
+
+static struct clk eqep1_clk = {
+	.name		= "eqep1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA830_LPSC1_EQEP,
+	.psc_ctlr	= 1,
+};
+
+static struct clk lcdc_clk = {
+	.name		= "lcdc",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_LCDC,
+	.psc_ctlr	= 1,
+};
+
+static struct clk mcasp0_clk = {
+	.name		= "mcasp0",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_McASP0,
+	.psc_ctlr	= 1,
+};
+
+static struct clk mcasp1_clk = {
+	.name		= "mcasp1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA830_LPSC1_McASP1,
+	.psc_ctlr	= 1,
+};
+
+static struct clk mcasp2_clk = {
+	.name		= "mcasp2",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA830_LPSC1_McASP2,
+	.psc_ctlr	= 1,
+};
+
+static struct clk usb20_clk = {
+	.name		= "usb20",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_USB20,
+	.psc_ctlr	= 1,
+};
+
+static struct clk aemif_clk = {
+	.name		= "aemif",
+	.parent		= &pll0_sysclk3,
+	.lpsc		= DA8XX_LPSC0_EMIF25,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk aintc_clk = {
+	.name		= "aintc",
+	.parent		= &pll0_sysclk4,
+	.lpsc		= DA8XX_LPSC0_AINTC,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk secu_mgr_clk = {
+	.name		= "secu_mgr",
+	.parent		= &pll0_sysclk4,
+	.lpsc		= DA8XX_LPSC0_SECU_MGR,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk emac_clk = {
+	.name		= "emac",
+	.parent		= &pll0_sysclk4,
+	.lpsc		= DA8XX_LPSC1_CPGMAC,
+	.psc_ctlr	= 1,
+};
+
+static struct clk gpio_clk = {
+	.name		= "gpio",
+	.parent		= &pll0_sysclk4,
+	.lpsc		= DA8XX_LPSC1_GPIO,
+	.psc_ctlr	= 1,
+};
+
+static struct clk i2c1_clk = {
+	.name		= "i2c1",
+	.parent		= &pll0_sysclk4,
+	.lpsc		= DA8XX_LPSC1_I2C,
+	.psc_ctlr	= 1,
+};
+
+static struct clk usb11_clk = {
+	.name		= "usb11",
+	.parent		= &pll0_sysclk4,
+	.lpsc		= DA8XX_LPSC1_USB11,
+	.psc_ctlr	= 1,
+};
+
+static struct clk emif3_clk = {
+	.name		= "emif3",
+	.parent		= &pll0_sysclk5,
+	.lpsc		= DA8XX_LPSC1_EMIF3C,
+	.flags		= ALWAYS_ENABLED,
+	.psc_ctlr	= 1,
+};
+
+static struct clk arm_clk = {
+	.name		= "arm",
+	.parent		= &pll0_sysclk6,
+	.lpsc		= DA8XX_LPSC0_ARM,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk rmii_clk = {
+	.name		= "rmii",
+	.parent		= &pll0_sysclk7,
+};
+
+static struct davinci_clk da830_clks[] = {
+	CLK(NULL,		"ref",		&ref_clk),
+	CLK(NULL,		"pll0",		&pll0_clk),
+	CLK(NULL,		"pll0_aux",	&pll0_aux_clk),
+	CLK(NULL,		"pll0_sysclk2",	&pll0_sysclk2),
+	CLK(NULL,		"pll0_sysclk3",	&pll0_sysclk3),
+	CLK(NULL,		"pll0_sysclk4",	&pll0_sysclk4),
+	CLK(NULL,		"pll0_sysclk5",	&pll0_sysclk5),
+	CLK(NULL,		"pll0_sysclk6",	&pll0_sysclk6),
+	CLK(NULL,		"pll0_sysclk7",	&pll0_sysclk7),
+	CLK("i2c_davinci.1",	NULL,		&i2c0_clk),
+	CLK(NULL,		"timer0",	&timerp64_0_clk),
+	CLK("watchdog",		NULL,		&timerp64_1_clk),
+	CLK(NULL,		"arm_rom",	&arm_rom_clk),
+	CLK(NULL,		"scr0_ss",	&scr0_ss_clk),
+	CLK(NULL,		"scr1_ss",	&scr1_ss_clk),
+	CLK(NULL,		"scr2_ss",	&scr2_ss_clk),
+	CLK(NULL,		"dmax",		&dmax_clk),
+	CLK(NULL,		"tpcc",		&tpcc_clk),
+	CLK(NULL,		"tptc0",	&tptc0_clk),
+	CLK(NULL,		"tptc1",	&tptc1_clk),
+	CLK("davinci_mmc.0",	NULL,		&mmcsd_clk),
+	CLK(NULL,		"uart0",	&uart0_clk),
+	CLK(NULL,		"uart1",	&uart1_clk),
+	CLK(NULL,		"uart2",	&uart2_clk),
+	CLK("dm_spi.0",		NULL,		&spi0_clk),
+	CLK("dm_spi.1",		NULL,		&spi1_clk),
+	CLK(NULL,		"ecap0",	&ecap0_clk),
+	CLK(NULL,		"ecap1",	&ecap1_clk),
+	CLK(NULL,		"ecap2",	&ecap2_clk),
+	CLK(NULL,		"pwm0",		&pwm0_clk),
+	CLK(NULL,		"pwm1",		&pwm1_clk),
+	CLK(NULL,		"pwm2",		&pwm2_clk),
+	CLK("eqep.0",		NULL,		&eqep0_clk),
+	CLK("eqep.1",		NULL,		&eqep1_clk),
+	CLK("da830_lcdc",	NULL,		&lcdc_clk),
+	CLK("soc-audio.0",	NULL,		&mcasp0_clk),
+	CLK("soc-audio.1",	NULL,		&mcasp1_clk),
+	CLK("soc-audio.2",	NULL,		&mcasp2_clk),
+	CLK("musb_hdrc",	NULL,		&usb20_clk),
+	CLK(NULL,		"aemif",	&aemif_clk),
+	CLK(NULL,		"aintc",	&aintc_clk),
+	CLK(NULL,		"secu_mgr",	&secu_mgr_clk),
+	CLK("davinci_emac.1",	NULL,		&emac_clk),
+	CLK(NULL,		"gpio",		&gpio_clk),
+	CLK("i2c_davinci.2",	NULL,		&i2c1_clk),
+	CLK(NULL,		"usb11",	&usb11_clk),
+	CLK(NULL,		"emif3",	&emif3_clk),
+	CLK(NULL,		"arm",		&arm_clk),
+	CLK(NULL,		"rmii",		&rmii_clk),
+	CLK(NULL,		NULL,		NULL),
+};
+
+#define PINMUX0			0x00
+#define PINMUX1			0x04
+#define PINMUX2			0x08
+#define PINMUX3			0x0c
+#define PINMUX4			0x10
+#define PINMUX5			0x14
+#define PINMUX6			0x18
+#define PINMUX7			0x1c
+#define PINMUX8			0x20
+#define PINMUX9			0x24
+#define PINMUX10		0x28
+#define PINMUX11		0x2c
+#define PINMUX12		0x30
+#define PINMUX13		0x34
+#define PINMUX14		0x38
+#define PINMUX15		0x3c
+#define PINMUX16		0x40
+#define PINMUX17		0x44
+#define PINMUX18		0x48
+#define PINMUX19		0x4c
+
+/*
+ * Device specific mux setup
+ *
+ *	     soc      description	mux    mode    mode   mux	dbg
+ *					reg   offset   mask   mode
+ */
+static const struct mux_config da830_pins[] = {
+#ifdef CONFIG_DAVINCI_MUX
+	MUX_CFG(DA830, GPIO7_14,	0,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, RTCK,		0,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_15,	0,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMU_0,		0,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, EMB_SDCKE,	0,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_CLK_GLUE,	0,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_CLK,		0,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, NEMB_CS_0,	0,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMB_CAS,	0,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMB_RAS,	0,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMB_WE,		0,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_BA_1,	1,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_BA_0,	1,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_0,		1,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_1,		1,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_2,		1,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_3,		1,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_4,		1,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_5,		1,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, GPIO7_0,		1,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_1,		1,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_2,		1,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_3,		1,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_4,		1,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_5,		1,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_6,		1,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_7,		1,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, EMB_A_6,		2,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_7,		2,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_8,		2,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_9,		2,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_10,	2,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_11,	2,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_12,	2,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_31,	2,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, GPIO7_8,		2,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_9,		2,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_10,	2,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_11,	2,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_12,	2,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_13,	2,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_13,	2,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, EMB_D_30,	3,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_29,	3,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_28,	3,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_27,	3,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_26,	3,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_25,	3,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_24,	3,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_23,	3,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_22,	4,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_21,	4,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_20,	4,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_19,	4,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_18,	4,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_17,	4,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_16,	4,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMB_WE_DQM_3,	4,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMB_WE_DQM_2,	5,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_0,		5,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_1,		5,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_2,		5,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_3,		5,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_4,		5,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_5,		5,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_6,		5,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, GPIO6_0,		5,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_1,		5,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_2,		5,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_3,		5,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_4,		5,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_5,		5,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_6,		5,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, EMB_D_7,		6,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_8,		6,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_9,		6,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_10,	6,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_11,	6,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_12,	6,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_13,	6,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_14,	6,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, GPIO6_7,		6,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_8,		6,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_9,		6,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_10,	6,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_11,	6,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_12,	6,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_13,	6,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_14,	6,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, EMB_D_15,	7,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMB_WE_DQM_1,	7,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMB_WE_DQM_0,	7,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, SPI0_SOMI_0,	7,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, SPI0_SIMO_0,	7,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, SPI0_CLK,	7,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, NSPI0_ENA,	7,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, NSPI0_SCS_0,	7,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, EQEP0I,		7,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, EQEP0S,		7,	16,	0xf,	2,	false)
+	MUX_CFG(DA830, EQEP1I,		7,	20,	0xf,	2,	false)
+	MUX_CFG(DA830, NUART0_CTS,	7,	24,	0xf,	2,	false)
+	MUX_CFG(DA830, NUART0_RTS,	7,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, EQEP0A,		7,	24,	0xf,	4,	false)
+	MUX_CFG(DA830, EQEP0B,		7,	28,	0xf,	4,	false)
+	MUX_CFG(DA830, GPIO6_15,	7,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_14,	7,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_15,	7,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_0,		7,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_1,		7,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_2,		7,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_3,		7,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_4,		7,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, SPI1_SOMI_0,	8,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, SPI1_SIMO_0,	8,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, SPI1_CLK,	8,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, UART0_RXD,	8,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, UART0_TXD,	8,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_10,		8,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_11,		8,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, NSPI1_ENA,	8,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, I2C1_SCL,	8,	0,	0xf,	2,	false)
+	MUX_CFG(DA830, I2C1_SDA,	8,	4,	0xf,	2,	false)
+	MUX_CFG(DA830, EQEP1S,		8,	8,	0xf,	2,	false)
+	MUX_CFG(DA830, I2C0_SDA,	8,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, I2C0_SCL,	8,	16,	0xf,	2,	false)
+	MUX_CFG(DA830, UART2_RXD,	8,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, TM64P0_IN12,	8,	12,	0xf,	4,	false)
+	MUX_CFG(DA830, TM64P0_OUT12,	8,	16,	0xf,	4,	false)
+	MUX_CFG(DA830, GPIO5_5,		8,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_6,		8,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_7,		8,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_8,		8,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_9,		8,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_10,	8,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_11,	8,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_12,	8,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, NSPI1_SCS_0,	9,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, USB0_DRVVBUS,	9,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, AHCLKX0,		9,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, ACLKX0,		9,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, AFSX0,		9,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, AHCLKR0,		9,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, ACLKR0,		9,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, AFSR0,		9,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, UART2_TXD,	9,	0,	0xf,	2,	false)
+	MUX_CFG(DA830, AHCLKX2,		9,	8,	0xf,	2,	false)
+	MUX_CFG(DA830, ECAP0_APWM0,	9,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, RMII_MHZ_50_CLK,	9,	20,	0xf,	2,	false)
+	MUX_CFG(DA830, ECAP1_APWM1,	9,	24,	0xf,	2,	false)
+	MUX_CFG(DA830, USB_REFCLKIN,	9,	8,	0xf,	4,	false)
+	MUX_CFG(DA830, GPIO5_13,	9,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_15,	9,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_11,	9,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_12,	9,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_13,	9,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_14,	9,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_15,	9,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_12,	9,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, AMUTE0,		10,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR0_0,		10,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR0_1,		10,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR0_2,		10,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR0_3,		10,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR0_4,		10,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR0_5,		10,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR0_6,		10,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, RMII_TXD_0,	10,	4,	0xf,	2,	false)
+	MUX_CFG(DA830, RMII_TXD_1,	10,	8,	0xf,	2,	false)
+	MUX_CFG(DA830, RMII_TXEN,	10,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, RMII_CRS_DV,	10,	16,	0xf,	2,	false)
+	MUX_CFG(DA830, RMII_RXD_0,	10,	20,	0xf,	2,	false)
+	MUX_CFG(DA830, RMII_RXD_1,	10,	24,	0xf,	2,	false)
+	MUX_CFG(DA830, RMII_RXER,	10,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, AFSR2,		10,	4,	0xf,	4,	false)
+	MUX_CFG(DA830, ACLKX2,		10,	8,	0xf,	4,	false)
+	MUX_CFG(DA830, AXR2_3,		10,	12,	0xf,	4,	false)
+	MUX_CFG(DA830, AXR2_2,		10,	16,	0xf,	4,	false)
+	MUX_CFG(DA830, AXR2_1,		10,	20,	0xf,	4,	false)
+	MUX_CFG(DA830, AFSX2,		10,	24,	0xf,	4,	false)
+	MUX_CFG(DA830, ACLKR2,		10,	28,	0xf,	4,	false)
+	MUX_CFG(DA830, NRESETOUT,	10,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_0,		10,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_1,		10,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_2,		10,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_3,		10,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_4,		10,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_5,		10,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_6,		10,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, AXR0_7,		11,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR0_8,		11,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, UART1_RXD,	11,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, UART1_TXD,	11,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR0_11,		11,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, AHCLKX1,		11,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, ACLKX1,		11,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, AFSX1,		11,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, MDIO_CLK,	11,	0,	0xf,	2,	false)
+	MUX_CFG(DA830, MDIO_D,		11,	4,	0xf,	2,	false)
+	MUX_CFG(DA830, AXR0_9,		11,	8,	0xf,	2,	false)
+	MUX_CFG(DA830, AXR0_10,		11,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, EPWM0B,		11,	20,	0xf,	2,	false)
+	MUX_CFG(DA830, EPWM0A,		11,	24,	0xf,	2,	false)
+	MUX_CFG(DA830, EPWMSYNCI,	11,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, AXR2_0,		11,	16,	0xf,	4,	false)
+	MUX_CFG(DA830, EPWMSYNC0,	11,	28,	0xf,	4,	false)
+	MUX_CFG(DA830, GPIO3_7,		11,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_8,		11,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_9,		11,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_10,	11,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_11,	11,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_14,	11,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_15,	11,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_10,	11,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, AHCLKR1,		12,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, ACLKR1,		12,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, AFSR1,		12,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, AMUTE1,		12,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_0,		12,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_1,		12,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_2,		12,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_3,		12,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, ECAP2_APWM2,	12,	4,	0xf,	2,	false)
+	MUX_CFG(DA830, EHRPWMGLUETZ,	12,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, EQEP1A,		12,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, GPIO4_11,	12,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_12,	12,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_13,	12,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_14,	12,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_0,		12,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_1,		12,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_2,		12,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_3,		12,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, AXR1_4,		13,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_5,		13,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_6,		13,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_7,		13,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_8,		13,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_9,		13,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_0,		13,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_1,		13,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, EQEP1B,		13,	0,	0xf,	2,	false)
+	MUX_CFG(DA830, EPWM2B,		13,	4,	0xf,	2,	false)
+	MUX_CFG(DA830, EPWM2A,		13,	8,	0xf,	2,	false)
+	MUX_CFG(DA830, EPWM1B,		13,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, EPWM1A,		13,	16,	0xf,	2,	false)
+	MUX_CFG(DA830, MMCSD_DAT_0,	13,	24,	0xf,	2,	false)
+	MUX_CFG(DA830, MMCSD_DAT_1,	13,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HD_0,	13,	24,	0xf,	4,	false)
+	MUX_CFG(DA830, UHPI_HD_1,	13,	28,	0xf,	4,	false)
+	MUX_CFG(DA830, GPIO4_4,		13,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_5,		13,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_6,		13,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_7,		13,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_8,		13,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_9,		13,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_0,		13,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_1,		13,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, EMA_D_2,		14,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_3,		14,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_4,		14,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_5,		14,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_6,		14,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_7,		14,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_8,		14,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_9,		14,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, MMCSD_DAT_2,	14,	0,	0xf,	2,	false)
+	MUX_CFG(DA830, MMCSD_DAT_3,	14,	4,	0xf,	2,	false)
+	MUX_CFG(DA830, MMCSD_DAT_4,	14,	8,	0xf,	2,	false)
+	MUX_CFG(DA830, MMCSD_DAT_5,	14,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, MMCSD_DAT_6,	14,	16,	0xf,	2,	false)
+	MUX_CFG(DA830, MMCSD_DAT_7,	14,	20,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HD_8,	14,	24,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HD_9,	14,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HD_2,	14,	0,	0xf,	4,	false)
+	MUX_CFG(DA830, UHPI_HD_3,	14,	4,	0xf,	4,	false)
+	MUX_CFG(DA830, UHPI_HD_4,	14,	8,	0xf,	4,	false)
+	MUX_CFG(DA830, UHPI_HD_5,	14,	12,	0xf,	4,	false)
+	MUX_CFG(DA830, UHPI_HD_6,	14,	16,	0xf,	4,	false)
+	MUX_CFG(DA830, UHPI_HD_7,	14,	20,	0xf,	4,	false)
+	MUX_CFG(DA830, LCD_D_8,		14,	24,	0xf,	4,	false)
+	MUX_CFG(DA830, LCD_D_9,		14,	28,	0xf,	4,	false)
+	MUX_CFG(DA830, GPIO0_2,		14,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_3,		14,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_4,		14,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_5,		14,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_6,		14,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_7,		14,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_8,		14,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_9,		14,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, EMA_D_10,	15,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_11,	15,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_12,	15,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_13,	15,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_14,	15,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_15,	15,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_0,		15,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_1,		15,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, UHPI_HD_10,	15,	0,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HD_11,	15,	4,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HD_12,	15,	8,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HD_13,	15,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HD_14,	15,	16,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HD_15,	15,	20,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_D_7,		15,	24,	0xf,	2,	false)
+	MUX_CFG(DA830, MMCSD_CLK,	15,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_D_10,	15,	0,	0xf,	4,	false)
+	MUX_CFG(DA830, LCD_D_11,	15,	4,	0xf,	4,	false)
+	MUX_CFG(DA830, LCD_D_12,	15,	8,	0xf,	4,	false)
+	MUX_CFG(DA830, LCD_D_13,	15,	12,	0xf,	4,	false)
+	MUX_CFG(DA830, LCD_D_14,	15,	16,	0xf,	4,	false)
+	MUX_CFG(DA830, LCD_D_15,	15,	20,	0xf,	4,	false)
+	MUX_CFG(DA830, UHPI_HCNTL0,	15,	28,	0xf,	4,	false)
+	MUX_CFG(DA830, GPIO0_10,	15,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_11,	15,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_12,	15,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_13,	15,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_14,	15,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_15,	15,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_0,		15,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_1,		15,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, EMA_A_2,		16,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_3,		16,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_4,		16,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_5,		16,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_6,		16,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_7,		16,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_8,		16,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_9,		16,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, MMCSD_CMD,	16,	0,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_D_6,		16,	4,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_D_3,		16,	8,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_D_2,		16,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_D_1,		16,	16,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_D_0,		16,	20,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_PCLK,	16,	24,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_HSYNC,	16,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HCNTL1,	16,	0,	0xf,	4,	false)
+	MUX_CFG(DA830, GPIO1_2,		16,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_3,		16,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_4,		16,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_5,		16,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_6,		16,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_7,		16,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_8,		16,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_9,		16,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, EMA_A_10,	17,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_11,	17,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_12,	17,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_BA_1,	17,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_BA_0,	17,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_CLK,		17,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_SDCKE,	17,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMA_CAS,	17,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, LCD_VSYNC,	17,	0,	0xf,	2,	false)
+	MUX_CFG(DA830, NLCD_AC_ENB_CS,	17,	4,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_MCLK,	17,	8,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_D_5,		17,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_D_4,		17,	16,	0xf,	2,	false)
+	MUX_CFG(DA830, OBSCLK,		17,	20,	0xf,	2,	false)
+	MUX_CFG(DA830, NEMA_CS_4,	17,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HHWIL,	17,	12,	0xf,	4,	false)
+	MUX_CFG(DA830, AHCLKR2,		17,	20,	0xf,	4,	false)
+	MUX_CFG(DA830, GPIO1_10,	17,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_11,	17,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_12,	17,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_13,	17,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_14,	17,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_15,	17,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_0,		17,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_1,		17,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, NEMA_RAS,	18,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMA_WE,		18,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMA_CS_0,	18,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMA_CS_2,	18,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMA_CS_3,	18,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMA_OE,		18,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMA_WE_DQM_1,	18,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMA_WE_DQM_0,	18,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMA_CS_5,	18,	0,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HRNW,	18,	4,	0xf,	2,	false)
+	MUX_CFG(DA830, NUHPI_HAS,	18,	8,	0xf,	2,	false)
+	MUX_CFG(DA830, NUHPI_HCS,	18,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, NUHPI_HDS1,	18,	20,	0xf,	2,	false)
+	MUX_CFG(DA830, NUHPI_HDS2,	18,	24,	0xf,	2,	false)
+	MUX_CFG(DA830, NUHPI_HINT,	18,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, AXR0_12,		18,	4,	0xf,	4,	false)
+	MUX_CFG(DA830, AMUTE2,		18,	16,	0xf,	4,	false)
+	MUX_CFG(DA830, AXR0_13,		18,	20,	0xf,	4,	false)
+	MUX_CFG(DA830, AXR0_14,		18,	24,	0xf,	4,	false)
+	MUX_CFG(DA830, AXR0_15,		18,	28,	0xf,	4,	false)
+	MUX_CFG(DA830, GPIO2_2,		18,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_3,		18,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_4,		18,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_5,		18,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_6,		18,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_7,		18,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_8,		18,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_9,		18,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, EMA_WAIT_0,	19,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, NUHPI_HRDY,	19,	0,	0xf,	2,	false)
+	MUX_CFG(DA830, GPIO2_10,	19,	0,	0xf,	8,	false)
+#endif
+};
+
+const short da830_emif25_pins[] __initdata = {
+	DA830_EMA_D_0, DA830_EMA_D_1, DA830_EMA_D_2, DA830_EMA_D_3,
+	DA830_EMA_D_4, DA830_EMA_D_5, DA830_EMA_D_6, DA830_EMA_D_7,
+	DA830_EMA_D_8, DA830_EMA_D_9, DA830_EMA_D_10, DA830_EMA_D_11,
+	DA830_EMA_D_12, DA830_EMA_D_13, DA830_EMA_D_14, DA830_EMA_D_15,
+	DA830_EMA_A_0, DA830_EMA_A_1, DA830_EMA_A_2, DA830_EMA_A_3,
+	DA830_EMA_A_4, DA830_EMA_A_5, DA830_EMA_A_6, DA830_EMA_A_7,
+	DA830_EMA_A_8, DA830_EMA_A_9, DA830_EMA_A_10, DA830_EMA_A_11,
+	DA830_EMA_A_12, DA830_EMA_BA_0, DA830_EMA_BA_1, DA830_EMA_CLK,
+	DA830_EMA_SDCKE, DA830_NEMA_CS_4, DA830_NEMA_CS_5, DA830_NEMA_WE,
+	DA830_NEMA_CS_0, DA830_NEMA_CS_2, DA830_NEMA_CS_3, DA830_NEMA_OE,
+	DA830_NEMA_WE_DQM_1, DA830_NEMA_WE_DQM_0, DA830_EMA_WAIT_0,
+	-1
+};
+
+const short da830_spi0_pins[] __initdata = {
+	DA830_SPI0_SOMI_0, DA830_SPI0_SIMO_0, DA830_SPI0_CLK, DA830_NSPI0_ENA,
+	DA830_NSPI0_SCS_0,
+	-1
+};
+
+const short da830_spi1_pins[] __initdata = {
+	DA830_SPI1_SOMI_0, DA830_SPI1_SIMO_0, DA830_SPI1_CLK, DA830_NSPI1_ENA,
+	DA830_NSPI1_SCS_0,
+	-1
+};
+
+const short da830_mmc_sd_pins[] __initdata = {
+	DA830_MMCSD_DAT_0, DA830_MMCSD_DAT_1, DA830_MMCSD_DAT_2,
+	DA830_MMCSD_DAT_3, DA830_MMCSD_DAT_4, DA830_MMCSD_DAT_5,
+	DA830_MMCSD_DAT_6, DA830_MMCSD_DAT_7, DA830_MMCSD_CLK,
+	DA830_MMCSD_CMD,
+	-1
+};
+
+const short da830_uart0_pins[] __initdata = {
+	DA830_NUART0_CTS, DA830_NUART0_RTS, DA830_UART0_RXD, DA830_UART0_TXD,
+	-1
+};
+
+const short da830_uart1_pins[] __initdata = {
+	DA830_UART1_RXD, DA830_UART1_TXD,
+	-1
+};
+
+const short da830_uart2_pins[] __initdata = {
+	DA830_UART2_RXD, DA830_UART2_TXD,
+	-1
+};
+
+const short da830_usb20_pins[] __initdata = {
+	DA830_USB0_DRVVBUS, DA830_USB_REFCLKIN,
+	-1
+};
+
+const short da830_usb11_pins[] __initdata = {
+	DA830_USB_REFCLKIN,
+	-1
+};
+
+const short da830_uhpi_pins[] __initdata = {
+	DA830_UHPI_HD_0, DA830_UHPI_HD_1, DA830_UHPI_HD_2, DA830_UHPI_HD_3,
+	DA830_UHPI_HD_4, DA830_UHPI_HD_5, DA830_UHPI_HD_6, DA830_UHPI_HD_7,
+	DA830_UHPI_HD_8, DA830_UHPI_HD_9, DA830_UHPI_HD_10, DA830_UHPI_HD_11,
+	DA830_UHPI_HD_12, DA830_UHPI_HD_13, DA830_UHPI_HD_14, DA830_UHPI_HD_15,
+	DA830_UHPI_HCNTL0, DA830_UHPI_HCNTL1, DA830_UHPI_HHWIL, DA830_UHPI_HRNW,
+	DA830_NUHPI_HAS, DA830_NUHPI_HCS, DA830_NUHPI_HDS1, DA830_NUHPI_HDS2,
+	DA830_NUHPI_HINT, DA830_NUHPI_HRDY,
+	-1
+};
+
+const short da830_cpgmac_pins[] __initdata = {
+	DA830_RMII_TXD_0, DA830_RMII_TXD_1, DA830_RMII_TXEN, DA830_RMII_CRS_DV,
+	DA830_RMII_RXD_0, DA830_RMII_RXD_1, DA830_RMII_RXER, DA830_MDIO_CLK,
+	DA830_MDIO_D,
+	-1
+};
+
+const short da830_emif3c_pins[] __initdata = {
+	DA830_EMB_SDCKE, DA830_EMB_CLK_GLUE, DA830_EMB_CLK, DA830_NEMB_CS_0,
+	DA830_NEMB_CAS, DA830_NEMB_RAS, DA830_NEMB_WE, DA830_EMB_BA_1,
+	DA830_EMB_BA_0, DA830_EMB_A_0, DA830_EMB_A_1, DA830_EMB_A_2,
+	DA830_EMB_A_3, DA830_EMB_A_4, DA830_EMB_A_5, DA830_EMB_A_6,
+	DA830_EMB_A_7, DA830_EMB_A_8, DA830_EMB_A_9, DA830_EMB_A_10,
+	DA830_EMB_A_11, DA830_EMB_A_12, DA830_NEMB_WE_DQM_3,
+	DA830_NEMB_WE_DQM_2, DA830_EMB_D_0, DA830_EMB_D_1, DA830_EMB_D_2,
+	DA830_EMB_D_3, DA830_EMB_D_4, DA830_EMB_D_5, DA830_EMB_D_6,
+	DA830_EMB_D_7, DA830_EMB_D_8, DA830_EMB_D_9, DA830_EMB_D_10,
+	DA830_EMB_D_11, DA830_EMB_D_12, DA830_EMB_D_13, DA830_EMB_D_14,
+	DA830_EMB_D_15, DA830_EMB_D_16, DA830_EMB_D_17, DA830_EMB_D_18,
+	DA830_EMB_D_19, DA830_EMB_D_20, DA830_EMB_D_21, DA830_EMB_D_22,
+	DA830_EMB_D_23, DA830_EMB_D_24, DA830_EMB_D_25, DA830_EMB_D_26,
+	DA830_EMB_D_27, DA830_EMB_D_28, DA830_EMB_D_29, DA830_EMB_D_30,
+	DA830_EMB_D_31, DA830_NEMB_WE_DQM_1, DA830_NEMB_WE_DQM_0,
+	-1
+};
+
+const short da830_mcasp0_pins[] __initdata = {
+	DA830_AHCLKX0, DA830_ACLKX0, DA830_AFSX0,
+	DA830_AHCLKR0, DA830_ACLKR0, DA830_AFSR0, DA830_AMUTE0,
+	DA830_AXR0_0, DA830_AXR0_1, DA830_AXR0_2, DA830_AXR0_3,
+	DA830_AXR0_4, DA830_AXR0_5, DA830_AXR0_6, DA830_AXR0_7,
+	DA830_AXR0_8, DA830_AXR0_9, DA830_AXR0_10, DA830_AXR0_11,
+	DA830_AXR0_12, DA830_AXR0_13, DA830_AXR0_14, DA830_AXR0_15,
+	-1
+};
+
+const short da830_mcasp1_pins[] __initdata = {
+	DA830_AHCLKX1, DA830_ACLKX1, DA830_AFSX1,
+	DA830_AHCLKR1, DA830_ACLKR1, DA830_AFSR1, DA830_AMUTE1,
+	DA830_AXR1_0, DA830_AXR1_1, DA830_AXR1_2, DA830_AXR1_3,
+	DA830_AXR1_4, DA830_AXR1_5, DA830_AXR1_6, DA830_AXR1_7,
+	DA830_AXR1_8, DA830_AXR1_9, DA830_AXR1_10, DA830_AXR1_11,
+	-1
+};
+
+const short da830_mcasp2_pins[] __initdata = {
+	DA830_AHCLKX2, DA830_ACLKX2, DA830_AFSX2,
+	DA830_AHCLKR2, DA830_ACLKR2, DA830_AFSR2, DA830_AMUTE2,
+	DA830_AXR2_0, DA830_AXR2_1, DA830_AXR2_2, DA830_AXR2_3,
+	-1
+};
+
+const short da830_i2c0_pins[] __initdata = {
+	DA830_I2C0_SDA, DA830_I2C0_SCL,
+	-1
+};
+
+const short da830_i2c1_pins[] __initdata = {
+	DA830_I2C1_SCL, DA830_I2C1_SDA,
+	-1
+};
+
+const short da830_lcdcntl_pins[] __initdata = {
+	DA830_LCD_D_0, DA830_LCD_D_1, DA830_LCD_D_2, DA830_LCD_D_3,
+	DA830_LCD_D_4, DA830_LCD_D_5, DA830_LCD_D_6, DA830_LCD_D_7,
+	DA830_LCD_D_8, DA830_LCD_D_9, DA830_LCD_D_10, DA830_LCD_D_11,
+	DA830_LCD_D_12, DA830_LCD_D_13, DA830_LCD_D_14, DA830_LCD_D_15,
+	DA830_LCD_PCLK, DA830_LCD_HSYNC, DA830_LCD_VSYNC, DA830_NLCD_AC_ENB_CS,
+	DA830_LCD_MCLK,
+	-1
+};
+
+const short da830_pwm_pins[] __initdata = {
+	DA830_ECAP0_APWM0, DA830_ECAP1_APWM1, DA830_EPWM0B, DA830_EPWM0A,
+	DA830_EPWMSYNCI, DA830_EPWMSYNC0, DA830_ECAP2_APWM2, DA830_EHRPWMGLUETZ,
+	DA830_EPWM2B, DA830_EPWM2A, DA830_EPWM1B, DA830_EPWM1A,
+	-1
+};
+
+const short da830_ecap0_pins[] __initdata = {
+	DA830_ECAP0_APWM0,
+	-1
+};
+
+const short da830_ecap1_pins[] __initdata = {
+	DA830_ECAP1_APWM1,
+	-1
+};
+
+const short da830_ecap2_pins[] __initdata = {
+	DA830_ECAP2_APWM2,
+	-1
+};
+
+const short da830_eqep0_pins[] __initdata = {
+	DA830_EQEP0I, DA830_EQEP0S, DA830_EQEP0A, DA830_EQEP0B,
+	-1
+};
+
+const short da830_eqep1_pins[] __initdata = {
+	DA830_EQEP1I, DA830_EQEP1S, DA830_EQEP1A, DA830_EQEP1B,
+	-1
+};
+
+int da830_pinmux_setup(const short pins[])
+{
+	int i, error = -EINVAL;
+
+	if (pins)
+		for (i = 0; pins[i] >= 0; i++) {
+			error = davinci_cfg_reg(pins[i]);
+			if (error)
+				break;
+		}
+
+	return error;
+}
+
+/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
+static u8 da830_default_priorities[DA830_N_CP_INTC_IRQ] = {
+	[IRQ_DA8XX_COMMTX]		= 7,
+	[IRQ_DA8XX_COMMRX]		= 7,
+	[IRQ_DA8XX_NINT]		= 7,
+	[IRQ_DA8XX_EVTOUT0]		= 7,
+	[IRQ_DA8XX_EVTOUT1]		= 7,
+	[IRQ_DA8XX_EVTOUT2]		= 7,
+	[IRQ_DA8XX_EVTOUT3]		= 7,
+	[IRQ_DA8XX_EVTOUT4]		= 7,
+	[IRQ_DA8XX_EVTOUT5]		= 7,
+	[IRQ_DA8XX_EVTOUT6]		= 7,
+	[IRQ_DA8XX_EVTOUT6]		= 7,
+	[IRQ_DA8XX_EVTOUT7]		= 7,
+	[IRQ_DA8XX_CCINT0]		= 7,
+	[IRQ_DA8XX_CCERRINT]		= 7,
+	[IRQ_DA8XX_TCERRINT0]		= 7,
+	[IRQ_DA8XX_AEMIFINT]		= 7,
+	[IRQ_DA8XX_I2CINT0]		= 7,
+	[IRQ_DA8XX_MMCSDINT0]		= 7,
+	[IRQ_DA8XX_MMCSDINT1]		= 7,
+	[IRQ_DA8XX_ALLINT0]		= 7,
+	[IRQ_DA8XX_RTC]			= 7,
+	[IRQ_DA8XX_SPINT0]		= 7,
+	[IRQ_DA8XX_TINT12_0]		= 7,
+	[IRQ_DA8XX_TINT34_0]		= 7,
+	[IRQ_DA8XX_TINT12_1]		= 7,
+	[IRQ_DA8XX_TINT34_1]		= 7,
+	[IRQ_DA8XX_UARTINT0]		= 7,
+	[IRQ_DA8XX_KEYMGRINT]		= 7,
+	[IRQ_DA8XX_SECINT]		= 7,
+	[IRQ_DA8XX_SECKEYERR]		= 7,
+	[IRQ_DA830_MPUERR]		= 7,
+	[IRQ_DA830_IOPUERR]		= 7,
+	[IRQ_DA830_BOOTCFGERR]		= 7,
+	[IRQ_DA8XX_CHIPINT0]		= 7,
+	[IRQ_DA8XX_CHIPINT1]		= 7,
+	[IRQ_DA8XX_CHIPINT2]		= 7,
+	[IRQ_DA8XX_CHIPINT3]		= 7,
+	[IRQ_DA8XX_TCERRINT1]		= 7,
+	[IRQ_DA8XX_C0_RX_THRESH_PULSE]	= 7,
+	[IRQ_DA8XX_C0_RX_PULSE]		= 7,
+	[IRQ_DA8XX_C0_TX_PULSE]		= 7,
+	[IRQ_DA8XX_C0_MISC_PULSE]	= 7,
+	[IRQ_DA8XX_C1_RX_THRESH_PULSE]	= 7,
+	[IRQ_DA8XX_C1_RX_PULSE]		= 7,
+	[IRQ_DA8XX_C1_TX_PULSE]		= 7,
+	[IRQ_DA8XX_C1_MISC_PULSE]	= 7,
+	[IRQ_DA8XX_MEMERR]		= 7,
+	[IRQ_DA8XX_GPIO0]		= 7,
+	[IRQ_DA8XX_GPIO1]		= 7,
+	[IRQ_DA8XX_GPIO2]		= 7,
+	[IRQ_DA8XX_GPIO3]		= 7,
+	[IRQ_DA8XX_GPIO4]		= 7,
+	[IRQ_DA8XX_GPIO5]		= 7,
+	[IRQ_DA8XX_GPIO6]		= 7,
+	[IRQ_DA8XX_GPIO7]		= 7,
+	[IRQ_DA8XX_GPIO8]		= 7,
+	[IRQ_DA8XX_I2CINT1]		= 7,
+	[IRQ_DA8XX_LCDINT]		= 7,
+	[IRQ_DA8XX_UARTINT1]		= 7,
+	[IRQ_DA8XX_MCASPINT]		= 7,
+	[IRQ_DA8XX_ALLINT1]		= 7,
+	[IRQ_DA8XX_SPINT1]		= 7,
+	[IRQ_DA8XX_UHPI_INT1]		= 7,
+	[IRQ_DA8XX_USB_INT]		= 7,
+	[IRQ_DA8XX_IRQN]		= 7,
+	[IRQ_DA8XX_RWAKEUP]		= 7,
+	[IRQ_DA8XX_UARTINT2]		= 7,
+	[IRQ_DA8XX_DFTSSINT]		= 7,
+	[IRQ_DA8XX_EHRPWM0]		= 7,
+	[IRQ_DA8XX_EHRPWM0TZ]		= 7,
+	[IRQ_DA8XX_EHRPWM1]		= 7,
+	[IRQ_DA8XX_EHRPWM1TZ]		= 7,
+	[IRQ_DA830_EHRPWM2]		= 7,
+	[IRQ_DA830_EHRPWM2TZ]		= 7,
+	[IRQ_DA8XX_ECAP0]		= 7,
+	[IRQ_DA8XX_ECAP1]		= 7,
+	[IRQ_DA8XX_ECAP2]		= 7,
+	[IRQ_DA830_EQEP0]		= 7,
+	[IRQ_DA830_EQEP1]		= 7,
+	[IRQ_DA830_T12CMPINT0_0]	= 7,
+	[IRQ_DA830_T12CMPINT1_0]	= 7,
+	[IRQ_DA830_T12CMPINT2_0]	= 7,
+	[IRQ_DA830_T12CMPINT3_0]	= 7,
+	[IRQ_DA830_T12CMPINT4_0]	= 7,
+	[IRQ_DA830_T12CMPINT5_0]	= 7,
+	[IRQ_DA830_T12CMPINT6_0]	= 7,
+	[IRQ_DA830_T12CMPINT7_0]	= 7,
+	[IRQ_DA830_T12CMPINT0_1]	= 7,
+	[IRQ_DA830_T12CMPINT1_1]	= 7,
+	[IRQ_DA830_T12CMPINT2_1]	= 7,
+	[IRQ_DA830_T12CMPINT3_1]	= 7,
+	[IRQ_DA830_T12CMPINT4_1]	= 7,
+	[IRQ_DA830_T12CMPINT5_1]	= 7,
+	[IRQ_DA830_T12CMPINT6_1]	= 7,
+	[IRQ_DA830_T12CMPINT7_1]	= 7,
+	[IRQ_DA8XX_ARMCLKSTOPREQ]	= 7,
+};
+
+static struct map_desc da830_io_desc[] = {
+	{
+		.virtual	= IO_VIRT,
+		.pfn		= __phys_to_pfn(IO_PHYS),
+		.length		= IO_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= DA8XX_CP_INTC_VIRT,
+		.pfn		= __phys_to_pfn(DA8XX_CP_INTC_BASE),
+		.length		= DA8XX_CP_INTC_SIZE,
+		.type		= MT_DEVICE
+	},
+};
+
+static void __iomem *da830_psc_bases[] = {
+	IO_ADDRESS(DA830_PSC0_BASE),
+	IO_ADDRESS(DA830_PSC1_BASE),
+};
+
+/* Contents of JTAG ID register used to identify exact cpu type */
+static struct davinci_id da830_ids[] = {
+	{
+		.variant	= 0x0,
+		.part_no	= 0xb7df,
+		.manufacturer	= 0x017,	/* 0x02f >> 1 */
+		.cpu_id		= DAVINCI_CPU_ID_DA830,
+		.name		= "da830/omap l137",
+	},
+};
+
+static struct davinci_timer_instance da830_timer_instance[2] = {
+	{
+		.base		= IO_ADDRESS(DA830_TIMER64P0_BASE),
+		.bottom_irq	= IRQ_DA8XX_TINT12_0,
+		.top_irq	= IRQ_DA8XX_TINT34_0,
+		.cmp_off	= DA830_CMP12_0,
+		.cmp_irq	= IRQ_DA830_T12CMPINT0_0,
+	},
+	{
+		.base		= IO_ADDRESS(DA830_TIMER64P1_BASE),
+		.bottom_irq	= IRQ_DA8XX_TINT12_1,
+		.top_irq	= IRQ_DA8XX_TINT34_1,
+		.cmp_off	= DA830_CMP12_0,
+		.cmp_irq	= IRQ_DA830_T12CMPINT0_1,
+	},
+};
+
+/*
+ * T0_BOT: Timer 0, bottom		: Used for clock_event & clocksource
+ * T0_TOP: Timer 0, top			: Used by DSP
+ * T1_BOT, T1_TOP: Timer 1, bottom & top: Used for watchdog timer
+ */
+static struct davinci_timer_info da830_timer_info = {
+	.timers		= da830_timer_instance,
+	.clockevent_id	= T0_BOT,
+	.clocksource_id	= T0_BOT,
+};
+
+static struct davinci_soc_info davinci_soc_info_da830 = {
+	.io_desc		= da830_io_desc,
+	.io_desc_num		= ARRAY_SIZE(da830_io_desc),
+	.jtag_id_base		= IO_ADDRESS(DA830_JTAG_ID_REG),
+	.ids			= da830_ids,
+	.ids_num		= ARRAY_SIZE(da830_ids),
+	.cpu_clks		= da830_clks,
+	.psc_bases		= da830_psc_bases,
+	.psc_bases_num		= ARRAY_SIZE(da830_psc_bases),
+	.pinmux_base		= IO_ADDRESS(DA8XX_BOOT_CFG_BASE + 0x120),
+	.pinmux_pins		= da830_pins,
+	.pinmux_pins_num	= ARRAY_SIZE(da830_pins),
+	.intc_base		= (void __iomem *)DA8XX_CP_INTC_VIRT,
+	.intc_type		= DAVINCI_INTC_TYPE_CP_INTC,
+	.intc_irq_prios		= da830_default_priorities,
+	.intc_irq_num		= DA830_N_CP_INTC_IRQ,
+	.timer_info		= &da830_timer_info,
+	.gpio_base		= IO_ADDRESS(DA830_GPIO_BASE),
+	.gpio_num		= 128,
+	.gpio_irq		= IRQ_DA8XX_GPIO0,
+	.serial_dev		= &da8xx_serial_device,
+	.emac_pdata		= &da8xx_emac_pdata,
+};
+
+void __init da830_init(void)
+{
+	davinci_common_init(&davinci_soc_info_da830);
+}
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
new file mode 100644
index 00000000000..c367055ae9b
--- /dev/null
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -0,0 +1,287 @@
+/*
+ * DA8XX/OMAP L1XX platform device data
+ *
+ * Copyright (c) 2007-2009, MontaVista Software, Inc. <source@mvista.com>
+ * Derived from code that was:
+ *	Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/serial_8250.h>
+
+#include <mach/cputype.h>
+#include <mach/common.h>
+#include <mach/time.h>
+#include <mach/da8xx.h>
+
+#include "clock.h"
+
+#define DA8XX_TPCC_BASE			0x01c00000
+#define DA8XX_TPTC0_BASE		0x01c08000
+#define DA8XX_TPTC1_BASE		0x01c08400
+#define DA8XX_WDOG_BASE			0x01c21000 /* DA8XX_TIMER64P1_BASE */
+#define DA8XX_I2C0_BASE			0x01c22000
+#define DA8XX_EMAC_CPPI_PORT_BASE	0x01e20000
+#define DA8XX_EMAC_CPGMACSS_BASE	0x01e22000
+#define DA8XX_EMAC_CPGMAC_BASE		0x01e23000
+#define DA8XX_EMAC_MDIO_BASE		0x01e24000
+#define DA8XX_GPIO_BASE			0x01e26000
+#define DA8XX_I2C1_BASE			0x01e28000
+
+#define DA8XX_EMAC_CTRL_REG_OFFSET	0x3000
+#define DA8XX_EMAC_MOD_REG_OFFSET	0x2000
+#define DA8XX_EMAC_RAM_OFFSET		0x0000
+#define DA8XX_MDIO_REG_OFFSET		0x4000
+#define DA8XX_EMAC_CTRL_RAM_SIZE	SZ_8K
+
+static struct plat_serial8250_port da8xx_serial_pdata[] = {
+	{
+		.mapbase	= DA8XX_UART0_BASE,
+		.irq		= IRQ_DA8XX_UARTINT0,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+					UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= DA8XX_UART1_BASE,
+		.irq		= IRQ_DA8XX_UARTINT1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+					UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= DA8XX_UART2_BASE,
+		.irq		= IRQ_DA8XX_UARTINT2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+					UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.flags	= 0,
+	},
+};
+
+struct platform_device da8xx_serial_device = {
+	.name	= "serial8250",
+	.id	= PLAT8250_DEV_PLATFORM,
+	.dev	= {
+		.platform_data	= da8xx_serial_pdata,
+	},
+};
+
+static const s8 da8xx_dma_chan_no_event[] = {
+	20, 21,
+	-1
+};
+
+static const s8 da8xx_queue_tc_mapping[][2] = {
+	/* {event queue no, TC no} */
+	{0, 0},
+	{1, 1},
+	{-1, -1}
+};
+
+static const s8 da8xx_queue_priority_mapping[][2] = {
+	/* {event queue no, Priority} */
+	{0, 3},
+	{1, 7},
+	{-1, -1}
+};
+
+static struct edma_soc_info da8xx_edma_info[] = {
+	{
+		.n_channel		= 32,
+		.n_region		= 4,
+		.n_slot			= 128,
+		.n_tc			= 2,
+		.n_cc			= 1,
+		.noevent		= da8xx_dma_chan_no_event,
+		.queue_tc_mapping	= da8xx_queue_tc_mapping,
+		.queue_priority_mapping	= da8xx_queue_priority_mapping,
+	},
+};
+
+static struct resource da8xx_edma_resources[] = {
+	{
+		.name	= "edma_cc0",
+		.start	= DA8XX_TPCC_BASE,
+		.end	= DA8XX_TPCC_BASE + SZ_32K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc0",
+		.start	= DA8XX_TPTC0_BASE,
+		.end	= DA8XX_TPTC0_BASE + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc1",
+		.start	= DA8XX_TPTC1_BASE,
+		.end	= DA8XX_TPTC1_BASE + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma0",
+		.start	= IRQ_DA8XX_TCERRINT0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.name	= "edma0_err",
+		.start	= IRQ_DA8XX_CCERRINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device da8xx_edma_device = {
+	.name		= "edma",
+	.id		= -1,
+	.dev = {
+		.platform_data	= da8xx_edma_info,
+	},
+	.num_resources	= ARRAY_SIZE(da8xx_edma_resources),
+	.resource	= da8xx_edma_resources,
+};
+
+int __init da8xx_register_edma(void)
+{
+	return platform_device_register(&da8xx_edma_device);
+}
+
+static struct resource da8xx_i2c_resources0[] = {
+	{
+		.start	= DA8XX_I2C0_BASE,
+		.end	= DA8XX_I2C0_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_DA8XX_I2CINT0,
+		.end	= IRQ_DA8XX_I2CINT0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device da8xx_i2c_device0 = {
+	.name		= "i2c_davinci",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(da8xx_i2c_resources0),
+	.resource	= da8xx_i2c_resources0,
+};
+
+static struct resource da8xx_i2c_resources1[] = {
+	{
+		.start	= DA8XX_I2C1_BASE,
+		.end	= DA8XX_I2C1_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_DA8XX_I2CINT1,
+		.end	= IRQ_DA8XX_I2CINT1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device da8xx_i2c_device1 = {
+	.name		= "i2c_davinci",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(da8xx_i2c_resources1),
+	.resource	= da8xx_i2c_resources1,
+};
+
+int __init da8xx_register_i2c(int instance,
+		struct davinci_i2c_platform_data *pdata)
+{
+	struct platform_device *pdev;
+
+	if (instance == 0)
+		pdev = &da8xx_i2c_device0;
+	else if (instance == 1)
+		pdev = &da8xx_i2c_device1;
+	else
+		return -EINVAL;
+
+	pdev->dev.platform_data = pdata;
+	return platform_device_register(pdev);
+}
+
+static struct resource da8xx_watchdog_resources[] = {
+	{
+		.start	= DA8XX_WDOG_BASE,
+		.end	= DA8XX_WDOG_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device davinci_wdt_device = {
+	.name		= "watchdog",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(da8xx_watchdog_resources),
+	.resource	= da8xx_watchdog_resources,
+};
+
+int __init da8xx_register_watchdog(void)
+{
+	return platform_device_register(&davinci_wdt_device);
+}
+
+static struct resource da8xx_emac_resources[] = {
+	{
+		.start	= DA8XX_EMAC_CPPI_PORT_BASE,
+		.end	= DA8XX_EMAC_CPPI_PORT_BASE + 0x5000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_DA8XX_C0_RX_THRESH_PULSE,
+		.end	= IRQ_DA8XX_C0_RX_THRESH_PULSE,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_C0_RX_PULSE,
+		.end	= IRQ_DA8XX_C0_RX_PULSE,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_C0_TX_PULSE,
+		.end	= IRQ_DA8XX_C0_TX_PULSE,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_C0_MISC_PULSE,
+		.end	= IRQ_DA8XX_C0_MISC_PULSE,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct emac_platform_data da8xx_emac_pdata = {
+	.ctrl_reg_offset	= DA8XX_EMAC_CTRL_REG_OFFSET,
+	.ctrl_mod_reg_offset	= DA8XX_EMAC_MOD_REG_OFFSET,
+	.ctrl_ram_offset	= DA8XX_EMAC_RAM_OFFSET,
+	.mdio_reg_offset	= DA8XX_MDIO_REG_OFFSET,
+	.ctrl_ram_size		= DA8XX_EMAC_CTRL_RAM_SIZE,
+	.version		= EMAC_VERSION_2,
+};
+
+static struct platform_device da8xx_emac_device = {
+	.name		= "davinci_emac",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &da8xx_emac_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(da8xx_emac_resources),
+	.resource	= da8xx_emac_resources,
+};
+
+int __init da8xx_register_emac(void)
+{
+	return platform_device_register(&da8xx_emac_device);
+}
diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h
index 56b92d49e29..fd41189e5c6 100644
--- a/arch/arm/mach-davinci/include/mach/cputype.h
+++ b/arch/arm/mach-davinci/include/mach/cputype.h
@@ -31,6 +31,7 @@ struct davinci_id {
 #define	DAVINCI_CPU_ID_DM6467		0x64670000
 #define	DAVINCI_CPU_ID_DM355		0x03550000
 #define	DAVINCI_CPU_ID_DM365		0x03650000
+#define	DAVINCI_CPU_ID_DA830		0x08300000
 
 #define IS_DAVINCI_CPU(type, id)					\
 static inline int is_davinci_ ##type(void)				\
@@ -42,6 +43,7 @@ IS_DAVINCI_CPU(dm644x, DAVINCI_CPU_ID_DM6446)
 IS_DAVINCI_CPU(dm646x, DAVINCI_CPU_ID_DM6467)
 IS_DAVINCI_CPU(dm355, DAVINCI_CPU_ID_DM355)
 IS_DAVINCI_CPU(dm365, DAVINCI_CPU_ID_DM365)
+IS_DAVINCI_CPU(da830, DAVINCI_CPU_ID_DA830)
 
 #ifdef CONFIG_ARCH_DAVINCI_DM644x
 #define cpu_is_davinci_dm644x() is_davinci_dm644x()
@@ -67,4 +69,10 @@ IS_DAVINCI_CPU(dm365, DAVINCI_CPU_ID_DM365)
 #define cpu_is_davinci_dm365() 0
 #endif
 
+#ifdef CONFIG_ARCH_DAVINCI_DA830
+#define cpu_is_davinci_da830() is_davinci_da830()
+#else
+#define cpu_is_davinci_da830() 0
+#endif
+
 #endif
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
new file mode 100644
index 00000000000..084db271c7c
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -0,0 +1,69 @@
+/*
+ * Chip specific defines for DA8XX/OMAP L1XX SoC
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_DAVINCI_DA8XX_H
+#define __ASM_ARCH_DAVINCI_DA8XX_H
+
+#include <mach/serial.h>
+#include <mach/edma.h>
+#include <mach/i2c.h>
+#include <mach/emac.h>
+
+/*
+ * The cp_intc interrupt controller for the da8xx isn't in the same
+ * chunk of physical memory space as the other registers (like it is
+ * on the davincis) so it needs to be mapped separately.  It will be
+ * mapped early on when the I/O space is mapped and we'll put it just
+ * before the I/O space in the processor's virtual memory space.
+ */
+#define DA8XX_CP_INTC_BASE	0xfffee000
+#define DA8XX_CP_INTC_SIZE	SZ_8K
+#define DA8XX_CP_INTC_VIRT	(IO_VIRT - DA8XX_CP_INTC_SIZE - SZ_4K)
+
+#define DA8XX_BOOT_CFG_BASE	(IO_PHYS + 0x14000)
+
+void __init da830_init(void);
+
+int da8xx_register_edma(void);
+int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata);
+int da8xx_register_watchdog(void);
+int da8xx_register_emac(void);
+
+extern struct platform_device da8xx_serial_device;
+extern struct emac_platform_data da8xx_emac_pdata;
+
+extern const short da830_emif25_pins[];
+extern const short da830_spi0_pins[];
+extern const short da830_spi1_pins[];
+extern const short da830_mmc_sd_pins[];
+extern const short da830_uart0_pins[];
+extern const short da830_uart1_pins[];
+extern const short da830_uart2_pins[];
+extern const short da830_usb20_pins[];
+extern const short da830_usb11_pins[];
+extern const short da830_uhpi_pins[];
+extern const short da830_cpgmac_pins[];
+extern const short da830_emif3c_pins[];
+extern const short da830_mcasp0_pins[];
+extern const short da830_mcasp1_pins[];
+extern const short da830_mcasp2_pins[];
+extern const short da830_i2c0_pins[];
+extern const short da830_i2c1_pins[];
+extern const short da830_lcdcntl_pins[];
+extern const short da830_pwm_pins[];
+extern const short da830_ecap0_pins[];
+extern const short da830_ecap1_pins[];
+extern const short da830_ecap2_pins[];
+extern const short da830_eqep0_pins[];
+extern const short da830_eqep1_pins[];
+
+int da830_pinmux_setup(const short pins[]);
+
+#endif /* __ASM_ARCH_DAVINCI_DA8XX_H */
diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h
index ba2ebdd058a..a85cbedc9b0 100644
--- a/arch/arm/mach-davinci/include/mach/edma.h
+++ b/arch/arm/mach-davinci/include/mach/edma.h
@@ -139,6 +139,54 @@ struct edmacc_param {
 #define DAVINCI_DMA_PWM1                 53
 #define DAVINCI_DMA_PWM2                 54
 
+/* DA830 specific EDMA3 information */
+#define EDMA_DA830_NUM_DMACH		32
+#define EDMA_DA830_NUM_TCC		32
+#define EDMA_DA830_NUM_PARAMENTRY	128
+#define EDMA_DA830_NUM_EVQUE		2
+#define EDMA_DA830_NUM_TC		2
+#define EDMA_DA830_CHMAP_EXIST		0
+#define EDMA_DA830_NUM_REGIONS		4
+#define DA830_DMACH2EVENT_MAP0		0x000FC03Fu
+#define DA830_DMACH2EVENT_MAP1		0x00000000u
+#define DA830_EDMA_ARM_OWN		0x30FFCCFFu
+
+/* DA830 specific EDMA3 Events Information */
+enum DA830_edma_ch {
+	DA830_DMACH_MCASP0_RX,
+	DA830_DMACH_MCASP0_TX,
+	DA830_DMACH_MCASP1_RX,
+	DA830_DMACH_MCASP1_TX,
+	DA830_DMACH_MCASP2_RX,
+	DA830_DMACH_MCASP2_TX,
+	DA830_DMACH_GPIO_BNK0INT,
+	DA830_DMACH_GPIO_BNK1INT,
+	DA830_DMACH_UART0_RX,
+	DA830_DMACH_UART0_TX,
+	DA830_DMACH_TMR64P0_EVTOUT12,
+	DA830_DMACH_TMR64P0_EVTOUT34,
+	DA830_DMACH_UART1_RX,
+	DA830_DMACH_UART1_TX,
+	DA830_DMACH_SPI0_RX,
+	DA830_DMACH_SPI0_TX,
+	DA830_DMACH_MMCSD_RX,
+	DA830_DMACH_MMCSD_TX,
+	DA830_DMACH_SPI1_RX,
+	DA830_DMACH_SPI1_TX,
+	DA830_DMACH_DMAX_EVTOUT6,
+	DA830_DMACH_DMAX_EVTOUT7,
+	DA830_DMACH_GPIO_BNK2INT,
+	DA830_DMACH_GPIO_BNK3INT,
+	DA830_DMACH_I2C0_RX,
+	DA830_DMACH_I2C0_TX,
+	DA830_DMACH_I2C1_RX,
+	DA830_DMACH_I2C1_TX,
+	DA830_DMACH_GPIO_BNK4INT,
+	DA830_DMACH_GPIO_BNK5INT,
+	DA830_DMACH_UART2_RX,
+	DA830_DMACH_UART2_TX
+};
+
 /*ch_status paramater of callback function possible values*/
 #define DMA_COMPLETE 1
 #define DMA_CC_ERROR 2
diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h
index 0d34f2fb099..735e378d27e 100644
--- a/arch/arm/mach-davinci/include/mach/irqs.h
+++ b/arch/arm/mach-davinci/include/mach/irqs.h
@@ -99,9 +99,6 @@
 #define IRQ_EMUINT       63
 
 #define DAVINCI_N_AINTC_IRQ	64
-#define DAVINCI_N_GPIO		104
-
-#define NR_IRQS			(DAVINCI_N_AINTC_IRQ + DAVINCI_N_GPIO)
 
 #define ARCH_TIMER_IRQ IRQ_TINT1_TINT34
 
@@ -242,4 +239,110 @@
 #define IRQ_DM365_TCERRINT3	62
 #define IRQ_DM365_EMUINT	63
 
+/* DA8XX interrupts */
+#define IRQ_DA8XX_COMMTX		0
+#define IRQ_DA8XX_COMMRX		1
+#define IRQ_DA8XX_NINT			2
+#define IRQ_DA8XX_EVTOUT0		3
+#define IRQ_DA8XX_EVTOUT1		4
+#define IRQ_DA8XX_EVTOUT2		5
+#define IRQ_DA8XX_EVTOUT3		6
+#define IRQ_DA8XX_EVTOUT4		7
+#define IRQ_DA8XX_EVTOUT5		8
+#define IRQ_DA8XX_EVTOUT6		9
+#define IRQ_DA8XX_EVTOUT7		10
+#define IRQ_DA8XX_CCINT0		11
+#define IRQ_DA8XX_CCERRINT		12
+#define IRQ_DA8XX_TCERRINT0		13
+#define IRQ_DA8XX_AEMIFINT		14
+#define IRQ_DA8XX_I2CINT0		15
+#define IRQ_DA8XX_MMCSDINT0		16
+#define IRQ_DA8XX_MMCSDINT1		17
+#define IRQ_DA8XX_ALLINT0		18
+#define IRQ_DA8XX_RTC			19
+#define IRQ_DA8XX_SPINT0		20
+#define IRQ_DA8XX_TINT12_0		21
+#define IRQ_DA8XX_TINT34_0		22
+#define IRQ_DA8XX_TINT12_1		23
+#define IRQ_DA8XX_TINT34_1		24
+#define IRQ_DA8XX_UARTINT0		25
+#define IRQ_DA8XX_KEYMGRINT		26
+#define IRQ_DA8XX_SECINT		26
+#define IRQ_DA8XX_SECKEYERR		26
+#define IRQ_DA8XX_CHIPINT0		28
+#define IRQ_DA8XX_CHIPINT1		29
+#define IRQ_DA8XX_CHIPINT2		30
+#define IRQ_DA8XX_CHIPINT3		31
+#define IRQ_DA8XX_TCERRINT1		32
+#define IRQ_DA8XX_C0_RX_THRESH_PULSE	33
+#define IRQ_DA8XX_C0_RX_PULSE		34
+#define IRQ_DA8XX_C0_TX_PULSE		35
+#define IRQ_DA8XX_C0_MISC_PULSE		36
+#define IRQ_DA8XX_C1_RX_THRESH_PULSE	37
+#define IRQ_DA8XX_C1_RX_PULSE		38
+#define IRQ_DA8XX_C1_TX_PULSE		39
+#define IRQ_DA8XX_C1_MISC_PULSE		40
+#define IRQ_DA8XX_MEMERR		41
+#define IRQ_DA8XX_GPIO0			42
+#define IRQ_DA8XX_GPIO1			43
+#define IRQ_DA8XX_GPIO2			44
+#define IRQ_DA8XX_GPIO3			45
+#define IRQ_DA8XX_GPIO4			46
+#define IRQ_DA8XX_GPIO5			47
+#define IRQ_DA8XX_GPIO6			48
+#define IRQ_DA8XX_GPIO7			49
+#define IRQ_DA8XX_GPIO8			50
+#define IRQ_DA8XX_I2CINT1		51
+#define IRQ_DA8XX_LCDINT		52
+#define IRQ_DA8XX_UARTINT1		53
+#define IRQ_DA8XX_MCASPINT		54
+#define IRQ_DA8XX_ALLINT1		55
+#define IRQ_DA8XX_SPINT1		56
+#define IRQ_DA8XX_UHPI_INT1		57
+#define IRQ_DA8XX_USB_INT		58
+#define IRQ_DA8XX_IRQN			59
+#define IRQ_DA8XX_RWAKEUP		60
+#define IRQ_DA8XX_UARTINT2		61
+#define IRQ_DA8XX_DFTSSINT		62
+#define IRQ_DA8XX_EHRPWM0		63
+#define IRQ_DA8XX_EHRPWM0TZ		64
+#define IRQ_DA8XX_EHRPWM1		65
+#define IRQ_DA8XX_EHRPWM1TZ		66
+#define IRQ_DA8XX_ECAP0			69
+#define IRQ_DA8XX_ECAP1			70
+#define IRQ_DA8XX_ECAP2			71
+#define IRQ_DA8XX_ARMCLKSTOPREQ		90
+
+/* DA830 specific interrupts */
+#define IRQ_DA830_MPUERR		27
+#define IRQ_DA830_IOPUERR		27
+#define IRQ_DA830_BOOTCFGERR		27
+#define IRQ_DA830_EHRPWM2		67
+#define IRQ_DA830_EHRPWM2TZ		68
+#define IRQ_DA830_EQEP0			72
+#define IRQ_DA830_EQEP1			73
+#define IRQ_DA830_T12CMPINT0_0		74
+#define IRQ_DA830_T12CMPINT1_0		75
+#define IRQ_DA830_T12CMPINT2_0		76
+#define IRQ_DA830_T12CMPINT3_0		77
+#define IRQ_DA830_T12CMPINT4_0		78
+#define IRQ_DA830_T12CMPINT5_0		79
+#define IRQ_DA830_T12CMPINT6_0		80
+#define IRQ_DA830_T12CMPINT7_0		81
+#define IRQ_DA830_T12CMPINT0_1		82
+#define IRQ_DA830_T12CMPINT1_1		83
+#define IRQ_DA830_T12CMPINT2_1		84
+#define IRQ_DA830_T12CMPINT3_1		85
+#define IRQ_DA830_T12CMPINT4_1		86
+#define IRQ_DA830_T12CMPINT5_1		87
+#define IRQ_DA830_T12CMPINT6_1		88
+#define IRQ_DA830_T12CMPINT7_1		89
+
+#define DA830_N_CP_INTC_IRQ		96
+
+/* da830 currently has the most gpio pins (128) */
+#define DAVINCI_N_GPIO			128
+/* da830 currently has the most irqs so use DA830_N_CP_INTC_IRQ */
+#define NR_IRQS				(DA830_N_CP_INTC_IRQ + DAVINCI_N_GPIO)
+
 #endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h
index c712c7cdf38..80309aed534 100644
--- a/arch/arm/mach-davinci/include/mach/memory.h
+++ b/arch/arm/mach-davinci/include/mach/memory.h
@@ -20,9 +20,16 @@
 /**************************************************************************
  * Definitions
  **************************************************************************/
-#define DAVINCI_DDR_BASE    0x80000000
+#define DAVINCI_DDR_BASE	0x80000000
+#define DA8XX_DDR_BASE		0xc0000000
 
+#if defined(CONFIG_ARCH_DAVINCI_DA8XX) && defined(CONFIG_ARCH_DAVINCI_DMx)
+#error Cannot enable DaVinci and DA8XX platforms concurrently
+#elif defined(CONFIG_ARCH_DAVINCI_DA8XX)
+#define PHYS_OFFSET DA8XX_DDR_BASE
+#else
 #define PHYS_OFFSET DAVINCI_DDR_BASE
+#endif
 
 /*
  * Increase size of DMA-consistent memory region
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index 55765e1fdb7..ae4f6dd3623 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -242,6 +242,410 @@ enum davinci_dm365_index {
 	DM365_EVT26_MMC0_RX,
 };
 
+enum da830_index {
+	DA830_GPIO7_14,
+	DA830_RTCK,
+	DA830_GPIO7_15,
+	DA830_EMU_0,
+	DA830_EMB_SDCKE,
+	DA830_EMB_CLK_GLUE,
+	DA830_EMB_CLK,
+	DA830_NEMB_CS_0,
+	DA830_NEMB_CAS,
+	DA830_NEMB_RAS,
+	DA830_NEMB_WE,
+	DA830_EMB_BA_1,
+	DA830_EMB_BA_0,
+	DA830_EMB_A_0,
+	DA830_EMB_A_1,
+	DA830_EMB_A_2,
+	DA830_EMB_A_3,
+	DA830_EMB_A_4,
+	DA830_EMB_A_5,
+	DA830_GPIO7_0,
+	DA830_GPIO7_1,
+	DA830_GPIO7_2,
+	DA830_GPIO7_3,
+	DA830_GPIO7_4,
+	DA830_GPIO7_5,
+	DA830_GPIO7_6,
+	DA830_GPIO7_7,
+	DA830_EMB_A_6,
+	DA830_EMB_A_7,
+	DA830_EMB_A_8,
+	DA830_EMB_A_9,
+	DA830_EMB_A_10,
+	DA830_EMB_A_11,
+	DA830_EMB_A_12,
+	DA830_EMB_D_31,
+	DA830_GPIO7_8,
+	DA830_GPIO7_9,
+	DA830_GPIO7_10,
+	DA830_GPIO7_11,
+	DA830_GPIO7_12,
+	DA830_GPIO7_13,
+	DA830_GPIO3_13,
+	DA830_EMB_D_30,
+	DA830_EMB_D_29,
+	DA830_EMB_D_28,
+	DA830_EMB_D_27,
+	DA830_EMB_D_26,
+	DA830_EMB_D_25,
+	DA830_EMB_D_24,
+	DA830_EMB_D_23,
+	DA830_EMB_D_22,
+	DA830_EMB_D_21,
+	DA830_EMB_D_20,
+	DA830_EMB_D_19,
+	DA830_EMB_D_18,
+	DA830_EMB_D_17,
+	DA830_EMB_D_16,
+	DA830_NEMB_WE_DQM_3,
+	DA830_NEMB_WE_DQM_2,
+	DA830_EMB_D_0,
+	DA830_EMB_D_1,
+	DA830_EMB_D_2,
+	DA830_EMB_D_3,
+	DA830_EMB_D_4,
+	DA830_EMB_D_5,
+	DA830_EMB_D_6,
+	DA830_GPIO6_0,
+	DA830_GPIO6_1,
+	DA830_GPIO6_2,
+	DA830_GPIO6_3,
+	DA830_GPIO6_4,
+	DA830_GPIO6_5,
+	DA830_GPIO6_6,
+	DA830_EMB_D_7,
+	DA830_EMB_D_8,
+	DA830_EMB_D_9,
+	DA830_EMB_D_10,
+	DA830_EMB_D_11,
+	DA830_EMB_D_12,
+	DA830_EMB_D_13,
+	DA830_EMB_D_14,
+	DA830_GPIO6_7,
+	DA830_GPIO6_8,
+	DA830_GPIO6_9,
+	DA830_GPIO6_10,
+	DA830_GPIO6_11,
+	DA830_GPIO6_12,
+	DA830_GPIO6_13,
+	DA830_GPIO6_14,
+	DA830_EMB_D_15,
+	DA830_NEMB_WE_DQM_1,
+	DA830_NEMB_WE_DQM_0,
+	DA830_SPI0_SOMI_0,
+	DA830_SPI0_SIMO_0,
+	DA830_SPI0_CLK,
+	DA830_NSPI0_ENA,
+	DA830_NSPI0_SCS_0,
+	DA830_EQEP0I,
+	DA830_EQEP0S,
+	DA830_EQEP1I,
+	DA830_NUART0_CTS,
+	DA830_NUART0_RTS,
+	DA830_EQEP0A,
+	DA830_EQEP0B,
+	DA830_GPIO6_15,
+	DA830_GPIO5_14,
+	DA830_GPIO5_15,
+	DA830_GPIO5_0,
+	DA830_GPIO5_1,
+	DA830_GPIO5_2,
+	DA830_GPIO5_3,
+	DA830_GPIO5_4,
+	DA830_SPI1_SOMI_0,
+	DA830_SPI1_SIMO_0,
+	DA830_SPI1_CLK,
+	DA830_UART0_RXD,
+	DA830_UART0_TXD,
+	DA830_AXR1_10,
+	DA830_AXR1_11,
+	DA830_NSPI1_ENA,
+	DA830_I2C1_SCL,
+	DA830_I2C1_SDA,
+	DA830_EQEP1S,
+	DA830_I2C0_SDA,
+	DA830_I2C0_SCL,
+	DA830_UART2_RXD,
+	DA830_TM64P0_IN12,
+	DA830_TM64P0_OUT12,
+	DA830_GPIO5_5,
+	DA830_GPIO5_6,
+	DA830_GPIO5_7,
+	DA830_GPIO5_8,
+	DA830_GPIO5_9,
+	DA830_GPIO5_10,
+	DA830_GPIO5_11,
+	DA830_GPIO5_12,
+	DA830_NSPI1_SCS_0,
+	DA830_USB0_DRVVBUS,
+	DA830_AHCLKX0,
+	DA830_ACLKX0,
+	DA830_AFSX0,
+	DA830_AHCLKR0,
+	DA830_ACLKR0,
+	DA830_AFSR0,
+	DA830_UART2_TXD,
+	DA830_AHCLKX2,
+	DA830_ECAP0_APWM0,
+	DA830_RMII_MHZ_50_CLK,
+	DA830_ECAP1_APWM1,
+	DA830_USB_REFCLKIN,
+	DA830_GPIO5_13,
+	DA830_GPIO4_15,
+	DA830_GPIO2_11,
+	DA830_GPIO2_12,
+	DA830_GPIO2_13,
+	DA830_GPIO2_14,
+	DA830_GPIO2_15,
+	DA830_GPIO3_12,
+	DA830_AMUTE0,
+	DA830_AXR0_0,
+	DA830_AXR0_1,
+	DA830_AXR0_2,
+	DA830_AXR0_3,
+	DA830_AXR0_4,
+	DA830_AXR0_5,
+	DA830_AXR0_6,
+	DA830_RMII_TXD_0,
+	DA830_RMII_TXD_1,
+	DA830_RMII_TXEN,
+	DA830_RMII_CRS_DV,
+	DA830_RMII_RXD_0,
+	DA830_RMII_RXD_1,
+	DA830_RMII_RXER,
+	DA830_AFSR2,
+	DA830_ACLKX2,
+	DA830_AXR2_3,
+	DA830_AXR2_2,
+	DA830_AXR2_1,
+	DA830_AFSX2,
+	DA830_ACLKR2,
+	DA830_NRESETOUT,
+	DA830_GPIO3_0,
+	DA830_GPIO3_1,
+	DA830_GPIO3_2,
+	DA830_GPIO3_3,
+	DA830_GPIO3_4,
+	DA830_GPIO3_5,
+	DA830_GPIO3_6,
+	DA830_AXR0_7,
+	DA830_AXR0_8,
+	DA830_UART1_RXD,
+	DA830_UART1_TXD,
+	DA830_AXR0_11,
+	DA830_AHCLKX1,
+	DA830_ACLKX1,
+	DA830_AFSX1,
+	DA830_MDIO_CLK,
+	DA830_MDIO_D,
+	DA830_AXR0_9,
+	DA830_AXR0_10,
+	DA830_EPWM0B,
+	DA830_EPWM0A,
+	DA830_EPWMSYNCI,
+	DA830_AXR2_0,
+	DA830_EPWMSYNC0,
+	DA830_GPIO3_7,
+	DA830_GPIO3_8,
+	DA830_GPIO3_9,
+	DA830_GPIO3_10,
+	DA830_GPIO3_11,
+	DA830_GPIO3_14,
+	DA830_GPIO3_15,
+	DA830_GPIO4_10,
+	DA830_AHCLKR1,
+	DA830_ACLKR1,
+	DA830_AFSR1,
+	DA830_AMUTE1,
+	DA830_AXR1_0,
+	DA830_AXR1_1,
+	DA830_AXR1_2,
+	DA830_AXR1_3,
+	DA830_ECAP2_APWM2,
+	DA830_EHRPWMGLUETZ,
+	DA830_EQEP1A,
+	DA830_GPIO4_11,
+	DA830_GPIO4_12,
+	DA830_GPIO4_13,
+	DA830_GPIO4_14,
+	DA830_GPIO4_0,
+	DA830_GPIO4_1,
+	DA830_GPIO4_2,
+	DA830_GPIO4_3,
+	DA830_AXR1_4,
+	DA830_AXR1_5,
+	DA830_AXR1_6,
+	DA830_AXR1_7,
+	DA830_AXR1_8,
+	DA830_AXR1_9,
+	DA830_EMA_D_0,
+	DA830_EMA_D_1,
+	DA830_EQEP1B,
+	DA830_EPWM2B,
+	DA830_EPWM2A,
+	DA830_EPWM1B,
+	DA830_EPWM1A,
+	DA830_MMCSD_DAT_0,
+	DA830_MMCSD_DAT_1,
+	DA830_UHPI_HD_0,
+	DA830_UHPI_HD_1,
+	DA830_GPIO4_4,
+	DA830_GPIO4_5,
+	DA830_GPIO4_6,
+	DA830_GPIO4_7,
+	DA830_GPIO4_8,
+	DA830_GPIO4_9,
+	DA830_GPIO0_0,
+	DA830_GPIO0_1,
+	DA830_EMA_D_2,
+	DA830_EMA_D_3,
+	DA830_EMA_D_4,
+	DA830_EMA_D_5,
+	DA830_EMA_D_6,
+	DA830_EMA_D_7,
+	DA830_EMA_D_8,
+	DA830_EMA_D_9,
+	DA830_MMCSD_DAT_2,
+	DA830_MMCSD_DAT_3,
+	DA830_MMCSD_DAT_4,
+	DA830_MMCSD_DAT_5,
+	DA830_MMCSD_DAT_6,
+	DA830_MMCSD_DAT_7,
+	DA830_UHPI_HD_8,
+	DA830_UHPI_HD_9,
+	DA830_UHPI_HD_2,
+	DA830_UHPI_HD_3,
+	DA830_UHPI_HD_4,
+	DA830_UHPI_HD_5,
+	DA830_UHPI_HD_6,
+	DA830_UHPI_HD_7,
+	DA830_LCD_D_8,
+	DA830_LCD_D_9,
+	DA830_GPIO0_2,
+	DA830_GPIO0_3,
+	DA830_GPIO0_4,
+	DA830_GPIO0_5,
+	DA830_GPIO0_6,
+	DA830_GPIO0_7,
+	DA830_GPIO0_8,
+	DA830_GPIO0_9,
+	DA830_EMA_D_10,
+	DA830_EMA_D_11,
+	DA830_EMA_D_12,
+	DA830_EMA_D_13,
+	DA830_EMA_D_14,
+	DA830_EMA_D_15,
+	DA830_EMA_A_0,
+	DA830_EMA_A_1,
+	DA830_UHPI_HD_10,
+	DA830_UHPI_HD_11,
+	DA830_UHPI_HD_12,
+	DA830_UHPI_HD_13,
+	DA830_UHPI_HD_14,
+	DA830_UHPI_HD_15,
+	DA830_LCD_D_7,
+	DA830_MMCSD_CLK,
+	DA830_LCD_D_10,
+	DA830_LCD_D_11,
+	DA830_LCD_D_12,
+	DA830_LCD_D_13,
+	DA830_LCD_D_14,
+	DA830_LCD_D_15,
+	DA830_UHPI_HCNTL0,
+	DA830_GPIO0_10,
+	DA830_GPIO0_11,
+	DA830_GPIO0_12,
+	DA830_GPIO0_13,
+	DA830_GPIO0_14,
+	DA830_GPIO0_15,
+	DA830_GPIO1_0,
+	DA830_GPIO1_1,
+	DA830_EMA_A_2,
+	DA830_EMA_A_3,
+	DA830_EMA_A_4,
+	DA830_EMA_A_5,
+	DA830_EMA_A_6,
+	DA830_EMA_A_7,
+	DA830_EMA_A_8,
+	DA830_EMA_A_9,
+	DA830_MMCSD_CMD,
+	DA830_LCD_D_6,
+	DA830_LCD_D_3,
+	DA830_LCD_D_2,
+	DA830_LCD_D_1,
+	DA830_LCD_D_0,
+	DA830_LCD_PCLK,
+	DA830_LCD_HSYNC,
+	DA830_UHPI_HCNTL1,
+	DA830_GPIO1_2,
+	DA830_GPIO1_3,
+	DA830_GPIO1_4,
+	DA830_GPIO1_5,
+	DA830_GPIO1_6,
+	DA830_GPIO1_7,
+	DA830_GPIO1_8,
+	DA830_GPIO1_9,
+	DA830_EMA_A_10,
+	DA830_EMA_A_11,
+	DA830_EMA_A_12,
+	DA830_EMA_BA_1,
+	DA830_EMA_BA_0,
+	DA830_EMA_CLK,
+	DA830_EMA_SDCKE,
+	DA830_NEMA_CAS,
+	DA830_LCD_VSYNC,
+	DA830_NLCD_AC_ENB_CS,
+	DA830_LCD_MCLK,
+	DA830_LCD_D_5,
+	DA830_LCD_D_4,
+	DA830_OBSCLK,
+	DA830_NEMA_CS_4,
+	DA830_UHPI_HHWIL,
+	DA830_AHCLKR2,
+	DA830_GPIO1_10,
+	DA830_GPIO1_11,
+	DA830_GPIO1_12,
+	DA830_GPIO1_13,
+	DA830_GPIO1_14,
+	DA830_GPIO1_15,
+	DA830_GPIO2_0,
+	DA830_GPIO2_1,
+	DA830_NEMA_RAS,
+	DA830_NEMA_WE,
+	DA830_NEMA_CS_0,
+	DA830_NEMA_CS_2,
+	DA830_NEMA_CS_3,
+	DA830_NEMA_OE,
+	DA830_NEMA_WE_DQM_1,
+	DA830_NEMA_WE_DQM_0,
+	DA830_NEMA_CS_5,
+	DA830_UHPI_HRNW,
+	DA830_NUHPI_HAS,
+	DA830_NUHPI_HCS,
+	DA830_NUHPI_HDS1,
+	DA830_NUHPI_HDS2,
+	DA830_NUHPI_HINT,
+	DA830_AXR0_12,
+	DA830_AMUTE2,
+	DA830_AXR0_13,
+	DA830_AXR0_14,
+	DA830_AXR0_15,
+	DA830_GPIO2_2,
+	DA830_GPIO2_3,
+	DA830_GPIO2_4,
+	DA830_GPIO2_5,
+	DA830_GPIO2_6,
+	DA830_GPIO2_7,
+	DA830_GPIO2_8,
+	DA830_GPIO2_9,
+	DA830_EMA_WAIT_0,
+	DA830_NUHPI_HRDY,
+	DA830_GPIO2_10,
+};
+
 #ifdef CONFIG_DAVINCI_MUX
 /* setup pin muxing */
 extern int davinci_cfg_reg(unsigned long reg_cfg);
diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h
index 2bb414b1429..6b9621d8828 100644
--- a/arch/arm/mach-davinci/include/mach/psc.h
+++ b/arch/arm/mach-davinci/include/mach/psc.h
@@ -136,6 +136,47 @@
 #define DM646X_LPSC_TIMER1         35
 #define DM646X_LPSC_ARM_INTC       45
 
+/* PSC0 defines */
+#define DA8XX_LPSC0_TPCC		0
+#define DA8XX_LPSC0_TPTC0		1
+#define DA8XX_LPSC0_TPTC1		2
+#define DA8XX_LPSC0_EMIF25		3
+#define DA8XX_LPSC0_SPI0		4
+#define DA8XX_LPSC0_MMC_SD		5
+#define DA8XX_LPSC0_AINTC		6
+#define DA8XX_LPSC0_ARM_RAM_ROM		7
+#define DA8XX_LPSC0_SECU_MGR		8
+#define DA8XX_LPSC0_UART0		9
+#define DA8XX_LPSC0_SCR0_SS		10
+#define DA8XX_LPSC0_SCR1_SS		11
+#define DA8XX_LPSC0_SCR2_SS		12
+#define DA8XX_LPSC0_DMAX		13
+#define DA8XX_LPSC0_ARM			14
+#define DA8XX_LPSC0_GEM			15
+
+/* PSC1 defines */
+#define DA8XX_LPSC1_USB20		1
+#define DA8XX_LPSC1_USB11		2
+#define DA8XX_LPSC1_GPIO		3
+#define DA8XX_LPSC1_UHPI		4
+#define DA8XX_LPSC1_CPGMAC		5
+#define DA8XX_LPSC1_EMIF3C		6
+#define DA8XX_LPSC1_McASP0		7
+#define DA830_LPSC1_McASP1		8
+#define DA830_LPSC1_McASP2		9
+#define DA8XX_LPSC1_SPI1		10
+#define DA8XX_LPSC1_I2C			11
+#define DA8XX_LPSC1_UART1		12
+#define DA8XX_LPSC1_UART2		13
+#define DA8XX_LPSC1_LCDC		16
+#define DA8XX_LPSC1_PWM			17
+#define DA8XX_LPSC1_ECAP		20
+#define DA830_LPSC1_EQEP		21
+#define DA8XX_LPSC1_SCR_P0_SS		24
+#define DA8XX_LPSC1_SCR_P1_SS		25
+#define DA8XX_LPSC1_CR_P3_SS		26
+#define DA8XX_LPSC1_L3_CBA_RAM		31
+
 extern int davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id);
 extern void davinci_psc_config(unsigned int domain, unsigned int ctlr,
 		unsigned int id, char enable);
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
index 794fa5cf93c..57e68e610ee 100644
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -18,6 +18,10 @@
 #define DAVINCI_UART1_BASE	(IO_PHYS + 0x20400)
 #define DAVINCI_UART2_BASE	(IO_PHYS + 0x20800)
 
+#define DA8XX_UART0_BASE	(IO_PHYS + 0x042000)
+#define DA8XX_UART1_BASE	(IO_PHYS + 0x10c000)
+#define DA8XX_UART2_BASE	(IO_PHYS + 0x10d000)
+
 /* DaVinci UART register offsets */
 #define UART_DAVINCI_PWREMU		0x0c
 #define UART_DM646X_SCR			0x10
-- 
cgit v1.2.3


From 8593790d604c29a717d5914159ce78c7bb9899fb Mon Sep 17 00:00:00 2001
From: "Mark A. Greer" <mgreer@mvista.com>
Date: Wed, 3 Jun 2009 18:41:53 -0700
Subject: davinci: da8xx: Add support for DA830/OMAP-L137 EVM board

Add support for the DA830/OMAP-L137 Evaluation Module (EVM)
from TI.  The EVM has User Interface (UI) and Audio cards
that can be connected which contain various devices.
Support for those devices and ones on the EVM will be
added in subsequent patches.

Additional generalizations for future SoCs in da8xx family done by
Sudhakar Rajashekhara and Sekhar Nori.

Signed-off-by: Steve Chen <schen@mvista.com>
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Cc: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/configs/da830_omapl137_defconfig        | 1254 ++++++++++++++++++++++
 arch/arm/mach-davinci/Kconfig                    |    6 +
 arch/arm/mach-davinci/Makefile                   |    1 +
 arch/arm/mach-davinci/board-da830-evm.c          |  127 +++
 arch/arm/mach-davinci/include/mach/debug-macro.S |    7 +
 arch/arm/mach-davinci/include/mach/uncompress.h  |    6 +-
 6 files changed, 1399 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/configs/da830_omapl137_defconfig
 create mode 100644 arch/arm/mach-davinci/board-da830-evm.c

(limited to 'arch/arm')

diff --git a/arch/arm/configs/da830_omapl137_defconfig b/arch/arm/configs/da830_omapl137_defconfig
new file mode 100644
index 00000000000..7c8e38f5c5a
--- /dev/null
+++ b/arch/arm/configs/da830_omapl137_defconfig
@@ -0,0 +1,1254 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc2-davinci1
+# Wed May 13 15:33:29 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+CONFIG_ARCH_DAVINCI=y
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+CONFIG_CP_INTC=y
+
+#
+# TI DaVinci Implementations
+#
+
+#
+# DaVinci Core Type
+#
+# CONFIG_ARCH_DAVINCI_DM644x is not set
+# CONFIG_ARCH_DAVINCI_DM646x is not set
+# CONFIG_ARCH_DAVINCI_DM355 is not set
+CONFIG_ARCH_DAVINCI_DA830=y
+
+#
+# DaVinci Board Type
+#
+CONFIG_MACH_DAVINCI_DA830_EVM=y
+CONFIG_DAVINCI_MUX=y
+# CONFIG_DAVINCI_MUX_DEBUG is not set
+# CONFIG_DAVINCI_MUX_WARNINGS is not set
+CONFIG_DAVINCI_RESET_CLOCKS=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_CPU_DCACHE_WRITETHROUGH=y
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_LEDS=y
+# CONFIG_LEDS_CPU is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+CONFIG_LXT_PHY=y
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+CONFIG_LSI_ET1011C_PHY=y
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+CONFIG_TI_DAVINCI_EMAC=y
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_EVBUG=m
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_XTKBD=m
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+# CONFIG_VT_CONSOLE is not set
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_DAVINCI=y
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+CONFIG_GPIO_PCF857X=m
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_DAVINCI_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=m
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SOC=m
+CONFIG_SND_DAVINCI_SOC=m
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_OTG is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=m
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index 312228ed848..646c569b75e 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -89,6 +89,12 @@ config MACH_DAVINCI_DM365_EVM
 	  Configure this option to specify whether the board used
 	  for development is a DM365 EVM
 
+config MACH_DAVINCI_DA830_EVM
+	bool "TI DA830/OMAP-L137 Reference Platform"
+	default ARCH_DAVINCI_DA830
+	depends on ARCH_DAVINCI_DA830
+	help
+	  Say Y here to select the TI DA830/OMAP-L137 Evaluation Module.
 
 config DAVINCI_MUX
 	bool "DAVINCI multiplexing support"
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 385638c0a71..d183b11da46 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -26,3 +26,4 @@ obj-$(CONFIG_MACH_DAVINCI_DM355_EVM)	+= board-dm355-evm.o
 obj-$(CONFIG_MACH_DM355_LEOPARD)	+= board-dm355-leopard.o
 obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM)	+= board-dm646x-evm.o
 obj-$(CONFIG_MACH_DAVINCI_DM365_EVM)	+= board-dm365-evm.o
+obj-$(CONFIG_MACH_DAVINCI_DA830_EVM)	+= board-da830-evm.o
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
new file mode 100644
index 00000000000..0409eb67cfe
--- /dev/null
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -0,0 +1,127 @@
+/*
+ * TI DA830/OMAP L137 EVM board
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ * Derived from: arch/arm/mach-davinci/board-dm644x-evm.c
+ *
+ * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/irqs.h>
+#include <mach/cp_intc.h>
+#include <mach/da8xx.h>
+
+#define DA830_EVM_PHY_MASK		0x0
+#define DA830_EVM_MDIO_FREQUENCY	2200000	/* PHY bus frequency */
+
+static struct at24_platform_data da830_evm_i2c_eeprom_info = {
+	.byte_len	= SZ_256K / 8,
+	.page_size	= 64,
+	.flags		= AT24_FLAG_ADDR16,
+	.setup		= davinci_get_mac_addr,
+	.context	= (void *)0x7f00,
+};
+
+static struct i2c_board_info __initdata da830_evm_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("24c256", 0x50),
+		.platform_data	= &da830_evm_i2c_eeprom_info,
+	},
+};
+
+static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata = {
+	.bus_freq	= 100,	/* kHz */
+	.bus_delay	= 0,	/* usec */
+};
+
+static struct davinci_uart_config da830_evm_uart_config __initdata = {
+	.enabled_uarts = 0x7,
+};
+
+static __init void da830_evm_init(void)
+{
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	int ret;
+
+	ret = da8xx_register_edma();
+	if (ret)
+		pr_warning("da830_evm_init: edma registration failed: %d\n",
+				ret);
+
+	ret = da830_pinmux_setup(da830_i2c0_pins);
+	if (ret)
+		pr_warning("da830_evm_init: i2c0 mux setup failed: %d\n",
+				ret);
+
+	ret = da8xx_register_i2c(0, &da830_evm_i2c_0_pdata);
+	if (ret)
+		pr_warning("da830_evm_init: i2c0 registration failed: %d\n",
+				ret);
+
+	soc_info->emac_pdata->phy_mask = DA830_EVM_PHY_MASK;
+	soc_info->emac_pdata->mdio_max_freq = DA830_EVM_MDIO_FREQUENCY;
+	soc_info->emac_pdata->rmii_en = 1;
+
+	ret = da830_pinmux_setup(da830_cpgmac_pins);
+	if (ret)
+		pr_warning("da830_evm_init: cpgmac mux setup failed: %d\n",
+				ret);
+
+	ret = da8xx_register_emac();
+	if (ret)
+		pr_warning("da830_evm_init: emac registration failed: %d\n",
+				ret);
+
+	ret = da8xx_register_watchdog();
+	if (ret)
+		pr_warning("da830_evm_init: watchdog registration failed: %d\n",
+				ret);
+
+	davinci_serial_init(&da830_evm_uart_config);
+	i2c_register_board_info(1, da830_evm_i2c_devices,
+			ARRAY_SIZE(da830_evm_i2c_devices));
+}
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+static int __init da830_evm_console_init(void)
+{
+	return add_preferred_console("ttyS", 2, "115200");
+}
+console_initcall(da830_evm_console_init);
+#endif
+
+static __init void da830_evm_irq_init(void)
+{
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	cp_intc_init((void __iomem *)DA8XX_CP_INTC_VIRT, DA830_N_CP_INTC_IRQ,
+			soc_info->intc_irq_prios);
+}
+
+static void __init da830_evm_map_io(void)
+{
+	da830_init();
+}
+
+MACHINE_START(DAVINCI_DA8XX_EVM, "DaVinci DA830/OMAP L137 EVM")
+	.phys_io	= IO_PHYS,
+	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+	.boot_params	= (DA8XX_DDR_BASE + 0x100),
+	.map_io		= da830_evm_map_io,
+	.init_irq	= da830_evm_irq_init,
+	.timer		= &davinci_timer,
+	.init_machine	= da830_evm_init,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index de3fc2182b4..69837a67d5f 100644
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -24,7 +24,14 @@
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0x01000000	@ physical base address
 		movne	\rx, #0xfe000000	@ virtual base
+#if defined(CONFIG_ARCH_DAVINCI_DA8XX) && defined(CONFIG_ARCH_DAVINCI_DMx)
+#error Cannot enable DaVinci and DA8XX platforms concurrently
+#elif defined(CONFIG_MACH_DAVINCI_DA8XX_EVM)
+		orr	\rx, \rx, #0x00d00000	@ physical base address
+		orr	\rx, \rx, #0x0000d000	@ of UART 2
+#else
 		orr	\rx, \rx, #0x00c20000   @ UART 0
+#endif
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h
index 1e27475f9a2..0f1f12b6787 100644
--- a/arch/arm/mach-davinci/include/mach/uncompress.h
+++ b/arch/arm/mach-davinci/include/mach/uncompress.h
@@ -21,8 +21,10 @@ static u32 *uart;
 
 static u32 *get_uart_base(void)
 {
-	/* Add logic here for new platforms, using __macine_arch_type */
-	return (u32 *)DAVINCI_UART0_BASE;
+	if (__machine_arch_type == MACH_TYPE_DAVINCI_DA8XX_EVM)
+		return (u32 *)DA8XX_UART2_BASE;
+	else
+		return (u32 *)DAVINCI_UART0_BASE;
 }
 
 /* PORT_16C550A, in polled non-fifo mode */
-- 
cgit v1.2.3


From af5dbaef76cb01995639cef10ca6f5a2b08207e8 Mon Sep 17 00:00:00 2001
From: Sandeep Paulraj <s-paulraj@ti.com>
Date: Wed, 24 Jun 2009 12:22:28 -0400
Subject: davinci: DM365 Updating PINMUX Entries

Patch updates DM365 PINMUX by adding entries for Video, SPI 1 - 4,
PWM 0 - 3.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/dm365.c            | 51 ++++++++++++++++++++++++++++
 arch/arm/mach-davinci/include/mach/mux.h | 58 ++++++++++++++++++++++++++++++++
 2 files changed, 109 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index c52aad30084..e5873bc0a0f 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -533,6 +533,57 @@ MUX_CFG(DM365,  EMAC_MDCLK,	3,   0,     1,    1,     false)
 
 MUX_CFG(DM365,	KEYPAD,		2,   0,     0x3f, 0x3f,  false)
 
+MUX_CFG(DM365,	PWM0,		1,   0,     3,    2,     false)
+MUX_CFG(DM365,	PWM0_G23,	3,   26,    3,    3,     false)
+MUX_CFG(DM365,	PWM1,		1,   2,     3,    2,     false)
+MUX_CFG(DM365,	PWM1_G25,	3,   29,    3,    2,     false)
+MUX_CFG(DM365,	PWM2_G87,	1,   10,    3,    2,     false)
+MUX_CFG(DM365,	PWM2_G88,	1,   8,     3,    2,     false)
+MUX_CFG(DM365,	PWM2_G89,	1,   6,     3,    2,     false)
+MUX_CFG(DM365,	PWM2_G90,	1,   4,     3,    2,     false)
+MUX_CFG(DM365,	PWM3_G80,	1,   20,    3,    3,     false)
+MUX_CFG(DM365,	PWM3_G81,	1,   18,    3,    3,     false)
+MUX_CFG(DM365,	PWM3_G85,	1,   14,    3,    2,     false)
+MUX_CFG(DM365,	PWM3_G86,	1,   12,    3,    2,     false)
+
+MUX_CFG(DM365,	SPI1_SCLK,	4,   2,     3,    1,	 false)
+MUX_CFG(DM365,	SPI1_SDI,	3,   31,    1,    1,	 false)
+MUX_CFG(DM365,	SPI1_SDO,	4,   0,     3,    1,	 false)
+MUX_CFG(DM365,	SPI1_SDENA0,	4,   4,     3,    1,	 false)
+MUX_CFG(DM365,	SPI1_SDENA1,	4,   0,     3,    2,	 false)
+
+MUX_CFG(DM365,	SPI2_SCLK,	4,   10,    3,    1,	 false)
+MUX_CFG(DM365,	SPI2_SDI,	4,   6,     3,    1,	 false)
+MUX_CFG(DM365,	SPI2_SDO,	4,   8,     3,    1,	 false)
+MUX_CFG(DM365,	SPI2_SDENA0,	4,   12,    3,    1,	 false)
+MUX_CFG(DM365,	SPI2_SDENA1,	4,   8,     3,    2,	 false)
+
+MUX_CFG(DM365,	SPI3_SCLK,	0,   0,	    3,    2,	 false)
+MUX_CFG(DM365,	SPI3_SDI,	0,   2,     3,    2,	 false)
+MUX_CFG(DM365,	SPI3_SDO,	0,   6,     3,    2,	 false)
+MUX_CFG(DM365,	SPI3_SDENA0,	0,   4,     3,    2,	 false)
+MUX_CFG(DM365,	SPI3_SDENA1,	0,   6,     3,    3,	 false)
+
+MUX_CFG(DM365,	SPI4_SCLK,	4,   18,    3,    1,	 false)
+MUX_CFG(DM365,	SPI4_SDI,	4,   14,    3,    1,	 false)
+MUX_CFG(DM365,	SPI4_SDO,	4,   16,    3,    1,	 false)
+MUX_CFG(DM365,	SPI4_SDENA0,	4,   20,    3,    1,	 false)
+MUX_CFG(DM365,	SPI4_SDENA1,	4,   16,    3,    2,	 false)
+
+MUX_CFG(DM365,	GPIO20,		3,   21,    3,    0,	 false)
+MUX_CFG(DM365,	GPIO33,		4,   12,    3,	  0,	 false)
+MUX_CFG(DM365,	GPIO40,		4,   26,    3,	  0,	 false)
+
+MUX_CFG(DM365,	VOUT_FIELD,	1,   18,    3,	  1,	 false)
+MUX_CFG(DM365,	VOUT_FIELD_G81,	1,   18,    3,	  0,	 false)
+MUX_CFG(DM365,	VOUT_HVSYNC,	1,   16,    1,	  0,	 false)
+MUX_CFG(DM365,	VOUT_COUTL_EN,	1,   0,     0xff, 0x55,  false)
+MUX_CFG(DM365,	VOUT_COUTH_EN,	1,   8,     0xff, 0x55,  false)
+MUX_CFG(DM365,	VIN_CAM_WEN,	0,   14,    3,	  0,	 false)
+MUX_CFG(DM365,	VIN_CAM_VD,	0,   13,    1,	  0,	 false)
+MUX_CFG(DM365,	VIN_CAM_HD,	0,   12,    1,	  0,	 false)
+MUX_CFG(DM365,	VIN_YIN_EN,	0,   0,     0xfff, 0,	 false)
+
 INT_CFG(DM365,  INT_EDMA_CC,         2,     1,    1,     false)
 INT_CFG(DM365,  INT_EDMA_TC0_ERR,    3,     1,    1,     false)
 INT_CFG(DM365,  INT_EDMA_TC1_ERR,    4,     1,    1,     false)
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index ae4f6dd3623..cce7509ea30 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -224,6 +224,64 @@ enum davinci_dm365_index {
 	/* Keypad */
 	DM365_KEYPAD,
 
+	/* PWM */
+	DM365_PWM0,
+	DM365_PWM0_G23,
+	DM365_PWM1,
+	DM365_PWM1_G25,
+	DM365_PWM2_G87,
+	DM365_PWM2_G88,
+	DM365_PWM2_G89,
+	DM365_PWM2_G90,
+	DM365_PWM3_G80,
+	DM365_PWM3_G81,
+	DM365_PWM3_G85,
+	DM365_PWM3_G86,
+
+	/* SPI1 */
+	DM365_SPI1_SCLK,
+	DM365_SPI1_SDO,
+	DM365_SPI1_SDI,
+	DM365_SPI1_SDENA0,
+	DM365_SPI1_SDENA1,
+
+	/* SPI2 */
+	DM365_SPI2_SCLK,
+	DM365_SPI2_SDO,
+	DM365_SPI2_SDI,
+	DM365_SPI2_SDENA0,
+	DM365_SPI2_SDENA1,
+
+	/* SPI3 */
+	DM365_SPI3_SCLK,
+	DM365_SPI3_SDO,
+	DM365_SPI3_SDI,
+	DM365_SPI3_SDENA0,
+	DM365_SPI3_SDENA1,
+
+	/* SPI4 */
+	DM365_SPI4_SCLK,
+	DM365_SPI4_SDO,
+	DM365_SPI4_SDI,
+	DM365_SPI4_SDENA0,
+	DM365_SPI4_SDENA1,
+
+	/* GPIO */
+	DM365_GPIO20,
+	DM365_GPIO33,
+	DM365_GPIO40,
+
+	/* Video */
+	DM365_VOUT_FIELD,
+	DM365_VOUT_FIELD_G81,
+	DM365_VOUT_HVSYNC,
+	DM365_VOUT_COUTL_EN,
+	DM365_VOUT_COUTH_EN,
+	DM365_VIN_CAM_WEN,
+	DM365_VIN_CAM_VD,
+	DM365_VIN_CAM_HD,
+	DM365_VIN_YIN_EN,
+
 	/* IRQ muxing */
 	DM365_INT_EDMA_CC,
 	DM365_INT_EDMA_TC0_ERR,
-- 
cgit v1.2.3


From 7a36071e7954836ba437987e5ca4ced174462b28 Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Thu, 25 Jun 2009 17:01:31 -0700
Subject: davinci: dm365 gpio irq support

Support DM365 GPIOs ... primarily by handling non-banked GPIO IRQs:

 - Flag DM365 chips as using non-banked GPIO interrupts, using a
   new soc_info field.

 - Replace the gpio_to_irq() mapping logic.  This now uses some
   runtime infrastructure, keyed off that new soc_info field,
   which doesn't handle irq_to_gpio().

 - Provide a new irq_chip ... GPIO IRQs handled directly by AINTC
   still need edge triggering managed by the GPIO controller.

DM365 chips no longer falsely report 104 GPIO IRQs as they boot.

Intelligence about IRQ muxing is missing, so for the moment this
only exposes the first eight DM365 GPIOs, which are never muxed.
The next eight are muxed, half with Ethernet (which uses most of
those pins anyway).

Tested on DM355 (10 unbanked IRQs _or_ 104 banked ones) and also
on DM365 (16 unbanked ones, only 8 made available).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/dm365.c               |   3 +-
 arch/arm/mach-davinci/gpio.c                | 105 ++++++++++++++++++++++++++--
 arch/arm/mach-davinci/include/mach/common.h |   1 +
 arch/arm/mach-davinci/include/mach/gpio.h   |   8 +--
 4 files changed, 105 insertions(+), 12 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index e5873bc0a0f..f02bce8eeba 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -882,7 +882,8 @@ static struct davinci_soc_info davinci_soc_info_dm365 = {
 	.timer_info		= &dm365_timer_info,
 	.gpio_base		= IO_ADDRESS(DAVINCI_GPIO_BASE),
 	.gpio_num		= 104,
-	.gpio_irq		= 44,
+	.gpio_irq		= IRQ_DM365_GPIO0,
+	.gpio_unbanked		= 8,	/* really 16 ... skip muxed GPIOs */
 	.serial_dev		= &dm365_serial_device,
 	.emac_pdata		= &dm365_emac_pdata,
 	.sram_dma		= 0x00010000,
diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c
index 1b6532159c5..f6ea9db11f4 100644
--- a/arch/arm/mach-davinci/gpio.c
+++ b/arch/arm/mach-davinci/gpio.c
@@ -34,6 +34,7 @@ static DEFINE_SPINLOCK(gpio_lock);
 struct davinci_gpio {
 	struct gpio_chip	chip;
 	struct gpio_controller	*__iomem regs;
+	int			irq_base;
 };
 
 static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
@@ -161,8 +162,7 @@ pure_initcall(davinci_gpio_setup);
  * used as output pins ... which is convenient for testing.
  *
  * NOTE:  The first few GPIOs also have direct INTC hookups in addition
- * to their GPIOBNK0 irq, with a bit less overhead but less flexibility
- * on triggering (e.g. no edge options).  We don't try to use those.
+ * to their GPIOBNK0 irq, with a bit less overhead.
  *
  * All those INTC hookups (direct, plus several IRQ banks) can also
  * serve as EDMA event triggers.
@@ -171,7 +171,7 @@ pure_initcall(davinci_gpio_setup);
 static void gpio_irq_disable(unsigned irq)
 {
 	struct gpio_controller *__iomem g = get_irq_chip_data(irq);
-	u32 mask = __gpio_mask(irq_to_gpio(irq));
+	u32 mask = (u32) get_irq_data(irq);
 
 	__raw_writel(mask, &g->clr_falling);
 	__raw_writel(mask, &g->clr_rising);
@@ -180,7 +180,7 @@ static void gpio_irq_disable(unsigned irq)
 static void gpio_irq_enable(unsigned irq)
 {
 	struct gpio_controller *__iomem g = get_irq_chip_data(irq);
-	u32 mask = __gpio_mask(irq_to_gpio(irq));
+	u32 mask = (u32) get_irq_data(irq);
 	unsigned status = irq_desc[irq].status;
 
 	status &= IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
@@ -196,7 +196,7 @@ static void gpio_irq_enable(unsigned irq)
 static int gpio_irq_type(unsigned irq, unsigned trigger)
 {
 	struct gpio_controller *__iomem g = get_irq_chip_data(irq);
-	u32 mask = __gpio_mask(irq_to_gpio(irq));
+	u32 mask = (u32) get_irq_data(irq);
 
 	if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
 		return -EINVAL;
@@ -260,6 +260,45 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 	/* now it may re-trigger */
 }
 
+static int gpio_to_irq_banked(struct gpio_chip *chip, unsigned offset)
+{
+	struct davinci_gpio *d = container_of(chip, struct davinci_gpio, chip);
+
+	if (d->irq_base >= 0)
+		return d->irq_base + offset;
+	else
+		return -ENODEV;
+}
+
+static int gpio_to_irq_unbanked(struct gpio_chip *chip, unsigned offset)
+{
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	/* NOTE:  we assume for now that only irqs in the first gpio_chip
+	 * can provide direct-mapped IRQs to AINTC (up to 32 GPIOs).
+	 */
+	if (offset < soc_info->gpio_unbanked)
+		return soc_info->gpio_irq + offset;
+	else
+		return -ENODEV;
+}
+
+static int gpio_irq_type_unbanked(unsigned irq, unsigned trigger)
+{
+	struct gpio_controller *__iomem g = get_irq_chip_data(irq);
+	u32 mask = (u32) get_irq_data(irq);
+
+	if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+		return -EINVAL;
+
+	__raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING)
+		     ? &g->set_falling : &g->clr_falling);
+	__raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING)
+		     ? &g->set_rising : &g->clr_rising);
+
+	return 0;
+}
+
 /*
  * NOTE:  for suspend/resume, probably best to make a platform_device with
  * suspend_late/resume_resume calls hooking into results of the set_wake()
@@ -275,6 +314,7 @@ static int __init davinci_gpio_irq_setup(void)
 	u32		binten = 0;
 	unsigned	ngpio, bank_irq;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	struct gpio_controller	*__iomem g;
 
 	ngpio = soc_info->gpio_num;
 
@@ -292,12 +332,63 @@ static int __init davinci_gpio_irq_setup(void)
 	}
 	clk_enable(clk);
 
+	/* Arrange gpio_to_irq() support, handling either direct IRQs or
+	 * banked IRQs.  Having GPIOs in the first GPIO bank use direct
+	 * IRQs, while the others use banked IRQs, would need some setup
+	 * tweaks to recognize hardware which can do that.
+	 */
+	for (gpio = 0, bank = 0; gpio < ngpio; bank++, gpio += 32) {
+		chips[bank].chip.to_irq = gpio_to_irq_banked;
+		chips[bank].irq_base = soc_info->gpio_unbanked
+			? -EINVAL
+			: (soc_info->intc_irq_num + gpio);
+	}
+
+	/*
+	 * AINTC can handle direct/unbanked IRQs for GPIOs, with the GPIO
+	 * controller only handling trigger modes.  We currently assume no
+	 * IRQ mux conflicts; gpio_irq_type_unbanked() is only for GPIOs.
+	 */
+	if (soc_info->gpio_unbanked) {
+		static struct irq_chip gpio_irqchip_unbanked;
+
+		/* pass "bank 0" GPIO IRQs to AINTC */
+		chips[0].chip.to_irq = gpio_to_irq_unbanked;
+		binten = BIT(0);
+
+		/* AINTC handles mask/unmask; GPIO handles triggering */
+		irq = bank_irq;
+		gpio_irqchip_unbanked = *get_irq_desc_chip(irq_to_desc(irq));
+		gpio_irqchip_unbanked.name = "GPIO-AINTC";
+		gpio_irqchip_unbanked.set_type = gpio_irq_type_unbanked;
+
+		/* default trigger: both edges */
+		g = gpio2controller(0);
+		__raw_writel(~0, &g->set_falling);
+		__raw_writel(~0, &g->set_rising);
+
+		/* set the direct IRQs up to use that irqchip */
+		for (gpio = 0; gpio < soc_info->gpio_unbanked; gpio++, irq++) {
+			set_irq_chip(irq, &gpio_irqchip_unbanked);
+			set_irq_data(irq, (void *) __gpio_mask(gpio));
+			set_irq_chip_data(irq, g);
+			irq_desc[irq].status |= IRQ_TYPE_EDGE_BOTH;
+		}
+
+		goto done;
+	}
+
+	/*
+	 * Or, AINTC can handle IRQs for banks of 16 GPIO IRQs, which we
+	 * then chain through our own handler.
+	 */
 	for (gpio = 0, irq = gpio_to_irq(0), bank = 0;
 			gpio < ngpio;
 			bank++, bank_irq++) {
-		struct gpio_controller	*__iomem g = gpio2controller(gpio);
 		unsigned		i;
 
+		/* disabled by default, enabled only as needed */
+		g = gpio2controller(gpio);
 		__raw_writel(~0, &g->clr_falling);
 		__raw_writel(~0, &g->clr_rising);
 
@@ -309,6 +400,7 @@ static int __init davinci_gpio_irq_setup(void)
 		for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) {
 			set_irq_chip(irq, &gpio_irqchip);
 			set_irq_chip_data(irq, g);
+			set_irq_data(irq, (void *) __gpio_mask(gpio));
 			set_irq_handler(irq, handle_simple_irq);
 			set_irq_flags(irq, IRQF_VALID);
 		}
@@ -316,6 +408,7 @@ static int __init davinci_gpio_irq_setup(void)
 		binten |= BIT(bank);
 	}
 
+done:
 	/* BINTEN -- per-bank interrupt enable. genirq would also let these
 	 * bits be set/cleared dynamically.
 	 */
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index b21393b24d6..1fd3917cae4 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -63,6 +63,7 @@ struct davinci_soc_info {
 	void __iomem			*gpio_base;
 	unsigned			gpio_num;
 	unsigned			gpio_irq;
+	unsigned			gpio_unbanked;
 	struct platform_device		*serial_dev;
 	struct emac_platform_data	*emac_pdata;
 	dma_addr_t			sram_dma;
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
index ae074556831..ebcc29babea 100644
--- a/arch/arm/mach-davinci/include/mach/gpio.h
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -142,15 +142,13 @@ static inline int gpio_cansleep(unsigned gpio)
 
 static inline int gpio_to_irq(unsigned gpio)
 {
-	if (gpio >= DAVINCI_N_GPIO)
-		return -EINVAL;
-	return davinci_soc_info.intc_irq_num + gpio;
+	return __gpio_to_irq(gpio);
 }
 
 static inline int irq_to_gpio(unsigned irq)
 {
-	/* caller guarantees gpio_to_irq() succeeded */
-	return irq - davinci_soc_info.intc_irq_num;
+	/* don't support the reverse mapping */
+	return -ENOSYS;
 }
 
 #endif				/* __DAVINCI_GPIO_H */
-- 
cgit v1.2.3


From 25acf553aeed86f93f2cf39227b59fc6eb3e8c78 Mon Sep 17 00:00:00 2001
From: Chaithrika U S <chaithrika@ti.com>
Date: Fri, 5 Jun 2009 06:28:08 -0400
Subject: davinci: ASoC: Add the platform devices for ASP

1) Registers the platform devices for ASP on dm355, dm644x and dm646x
   so that the machine driver can probe to get ASP related platform
   data.
2) Move towards definition of the asp clocks using physical name(for
   dm355 and dm644x)
3) Add platform data to board specific files.

Signed-off-by: Naresh Medisetty <naresh@ti.com>
Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-dm355-evm.c     |  7 +++
 arch/arm/mach-davinci/board-dm644x-evm.c    |  5 ++
 arch/arm/mach-davinci/board-dm646x-evm.c    | 33 +++++++++++++
 arch/arm/mach-davinci/dm355.c               | 43 ++++++++++++++++-
 arch/arm/mach-davinci/dm644x.c              | 36 +++++++++++++-
 arch/arm/mach-davinci/dm646x.c              | 74 +++++++++++++++++++++++++++++
 arch/arm/mach-davinci/include/mach/asp.h    | 35 +++++++++++++-
 arch/arm/mach-davinci/include/mach/dm355.h  |  5 ++
 arch/arm/mach-davinci/include/mach/dm644x.h |  2 +
 arch/arm/mach-davinci/include/mach/dm646x.h |  3 ++
 10 files changed, 238 insertions(+), 5 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index d6ab64ccd49..4ef6dbeccf3 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -117,6 +117,10 @@ static struct davinci_i2c_platform_data i2c_pdata = {
 	.bus_delay	= 0	/* usec */,
 };
 
+static struct snd_platform_data dm355_evm_snd_data = {
+	.clk_name	= "asp1",
+};
+
 static int dm355evm_mmc_gpios = -EINVAL;
 
 static void dm355evm_mmcsd_gpios(unsigned gpio)
@@ -279,6 +283,9 @@ static __init void dm355_evm_init(void)
 
 	dm355_init_spi0(BIT(0), dm355_evm_spi_info,
 			ARRAY_SIZE(dm355_evm_spi_info));
+
+	/* DM335 EVM uses ASP1; line-out is a stereo mini-jack */
+	dm355_init_asp1(ASP1_TX_EVT_EN | ASP1_RX_EVT_EN, &dm355_evm_snd_data);
 }
 
 static __init void dm355_evm_irq_init(void)
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 56c8cd01de9..d37f5c204b6 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -225,6 +225,10 @@ static struct platform_device ide_dev = {
 	},
 };
 
+static struct snd_platform_data dm644x_evm_snd_data = {
+	.clk_name	= "asp0",
+};
+
 /*----------------------------------------------------------------------*/
 
 /*
@@ -666,6 +670,7 @@ static __init void davinci_evm_init(void)
 	davinci_setup_mmc(0, &dm6446evm_mmc_config);
 
 	davinci_serial_init(&uart_config);
+	dm644x_init_asp(&dm644x_evm_snd_data);
 
 	soc_info->emac_pdata->phy_mask = DM644X_EVM_PHY_MASK;
 	soc_info->emac_pdata->mdio_max_freq = DM644X_EVM_MDIO_FREQUENCY;
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 8657e72debc..0aa18df4110 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -206,6 +206,37 @@ static struct at24_platform_data eeprom_info = {
 	.context	= (void *)0x7f00,
 };
 
+static u8 dm646x_iis_serializer_direction[] = {
+       TX_MODE, RX_MODE, INACTIVE_MODE, INACTIVE_MODE,
+};
+
+static u8 dm646x_dit_serializer_direction[] = {
+       TX_MODE,
+};
+
+static struct snd_platform_data dm646x_evm_snd_data[] = {
+	{
+		.clk_name       = "mcasp0",
+		.tx_dma_offset  = 0x400,
+		.rx_dma_offset  = 0x400,
+		.op_mode        = DAVINCI_MCASP_IIS_MODE,
+		.num_serializer = ARRAY_SIZE(dm646x_iis_serializer_direction),
+		.tdm_slots      = 2,
+		.serial_dir     = dm646x_iis_serializer_direction,
+		.eventq_no      = EVENTQ_0,
+	},
+	{
+		.clk_name       = "mcasp1",
+		.tx_dma_offset  = 0x400,
+		.rx_dma_offset  = 0,
+		.op_mode        = DAVINCI_MCASP_DIT_MODE,
+		.num_serializer = ARRAY_SIZE(dm646x_dit_serializer_direction),
+		.tdm_slots      = 32,
+		.serial_dir     = dm646x_dit_serializer_direction,
+		.eventq_no      = EVENTQ_0,
+	},
+};
+
 static struct i2c_board_info __initdata i2c_info[] =  {
 	{
 		I2C_BOARD_INFO("24c256", 0x50),
@@ -239,6 +270,8 @@ static __init void evm_init(void)
 
 	evm_init_i2c();
 	davinci_serial_init(&uart_config);
+	dm646x_init_mcasp0(&dm646x_evm_snd_data[0]);
+	dm646x_init_mcasp1(&dm646x_evm_snd_data[1]);
 
 	soc_info->emac_pdata->phy_mask = DM646X_EVM_PHY_MASK;
 	soc_info->emac_pdata->mdio_max_freq = DM646X_EVM_MDIO_FREQUENCY;
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 48f33e42051..b4d709a8612 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -30,6 +30,7 @@
 #include <mach/time.h>
 #include <mach/serial.h>
 #include <mach/common.h>
+#include <mach/asp.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -360,8 +361,8 @@ static struct davinci_clk dm355_clks[] = {
 	CLK(NULL, "uart1", &uart1_clk),
 	CLK(NULL, "uart2", &uart2_clk),
 	CLK("i2c_davinci.1", NULL, &i2c_clk),
-	CLK("soc-audio.0", NULL, &asp0_clk),
-	CLK("soc-audio.1", NULL, &asp1_clk),
+	CLK(NULL, "asp0", &asp0_clk),
+	CLK(NULL, "asp1", &asp1_clk),
 	CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
 	CLK("davinci_mmc.1", NULL, &mmcsd1_clk),
 	CLK(NULL, "spi0", &spi0_clk),
@@ -627,6 +628,31 @@ static struct platform_device dm355_edma_device = {
 	.resource		= edma_resources,
 };
 
+static struct resource dm355_asp1_resources[] = {
+	{
+		.start	= DAVINCI_ASP1_BASE,
+		.end	= DAVINCI_ASP1_BASE + SZ_8K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= DAVINCI_DMA_ASP1_TX,
+		.end	= DAVINCI_DMA_ASP1_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	{
+		.start	= DAVINCI_DMA_ASP1_RX,
+		.end	= DAVINCI_DMA_ASP1_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device dm355_asp1_device = {
+	.name		= "davinci-asp",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(dm355_asp1_resources),
+	.resource	= dm355_asp1_resources,
+};
+
 /*----------------------------------------------------------------------*/
 
 static struct map_desc dm355_io_desc[] = {
@@ -735,6 +761,19 @@ static struct davinci_soc_info davinci_soc_info_dm355 = {
 	.sram_len		= SZ_32K,
 };
 
+void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata)
+{
+	/* we don't use ASP1 IRQs, or we'd need to mux them ... */
+	if (evt_enable & ASP1_TX_EVT_EN)
+		davinci_cfg_reg(DM355_EVT8_ASP1_TX);
+
+	if (evt_enable & ASP1_RX_EVT_EN)
+		davinci_cfg_reg(DM355_EVT9_ASP1_RX);
+
+	dm355_asp1_device.dev.platform_data = pdata;
+	platform_device_register(&dm355_asp1_device);
+}
+
 void __init dm355_init(void)
 {
 	davinci_common_init(&davinci_soc_info_dm355);
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index d20e447a8b4..55317b1cf86 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -27,6 +27,7 @@
 #include <mach/time.h>
 #include <mach/serial.h>
 #include <mach/common.h>
+#include <mach/asp.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -303,7 +304,7 @@ struct davinci_clk dm644x_clks[] = {
 	CLK("davinci_emac.1", NULL, &emac_clk),
 	CLK("i2c_davinci.1", NULL, &i2c_clk),
 	CLK("palm_bk3710", NULL, &ide_clk),
-	CLK("soc-audio.0", NULL, &asp_clk),
+	CLK(NULL, "asp0", &asp_clk),
 	CLK("davinci_mmc.0", NULL, &mmcsd_clk),
 	CLK(NULL, "spi", &spi_clk),
 	CLK(NULL, "gpio", &gpio_clk),
@@ -553,6 +554,32 @@ static struct platform_device dm644x_edma_device = {
 	.resource		= edma_resources,
 };
 
+/* DM6446 EVM uses ASP0; line-out is a pair of RCA jacks */
+static struct resource dm644x_asp_resources[] = {
+	{
+		.start	= DAVINCI_ASP0_BASE,
+		.end	= DAVINCI_ASP0_BASE + SZ_8K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= DAVINCI_DMA_ASP0_TX,
+		.end	= DAVINCI_DMA_ASP0_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	{
+		.start	= DAVINCI_DMA_ASP0_RX,
+		.end	= DAVINCI_DMA_ASP0_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device dm644x_asp_device = {
+	.name		= "davinci-asp",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(dm644x_asp_resources),
+	.resource	= dm644x_asp_resources,
+};
+
 /*----------------------------------------------------------------------*/
 
 static struct map_desc dm644x_io_desc[] = {
@@ -669,6 +696,13 @@ static struct davinci_soc_info davinci_soc_info_dm644x = {
 	.sram_len		= SZ_16K,
 };
 
+void __init dm644x_init_asp(struct snd_platform_data *pdata)
+{
+	davinci_cfg_reg(DM644X_MCBSP);
+	dm644x_asp_device.dev.platform_data = pdata;
+	platform_device_register(&dm644x_asp_device);
+}
+
 void __init dm644x_init(void)
 {
 	davinci_common_init(&davinci_soc_info_dm644x);
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 2c76a4d47bf..199f288e03c 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -27,6 +27,7 @@
 #include <mach/time.h>
 #include <mach/serial.h>
 #include <mach/common.h>
+#include <mach/asp.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -591,6 +592,66 @@ static struct platform_device dm646x_edma_device = {
 	.resource		= edma_resources,
 };
 
+static struct resource dm646x_mcasp0_resources[] = {
+	{
+		.name	= "mcasp0",
+		.start 	= DAVINCI_DM646X_MCASP0_REG_BASE,
+		.end 	= DAVINCI_DM646X_MCASP0_REG_BASE + (SZ_1K << 1) - 1,
+		.flags 	= IORESOURCE_MEM,
+	},
+	/* first TX, then RX */
+	{
+		.start	= DAVINCI_DM646X_DMA_MCASP0_AXEVT0,
+		.end	= DAVINCI_DM646X_DMA_MCASP0_AXEVT0,
+		.flags	= IORESOURCE_DMA,
+	},
+	{
+		.start	= DAVINCI_DM646X_DMA_MCASP0_AREVT0,
+		.end	= DAVINCI_DM646X_DMA_MCASP0_AREVT0,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct resource dm646x_mcasp1_resources[] = {
+	{
+		.name	= "mcasp1",
+		.start	= DAVINCI_DM646X_MCASP1_REG_BASE,
+		.end	= DAVINCI_DM646X_MCASP1_REG_BASE + (SZ_1K << 1) - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	/* DIT mode, only TX event */
+	{
+		.start	= DAVINCI_DM646X_DMA_MCASP1_AXEVT1,
+		.end	= DAVINCI_DM646X_DMA_MCASP1_AXEVT1,
+		.flags	= IORESOURCE_DMA,
+	},
+	/* DIT mode, dummy entry */
+	{
+		.start	= -1,
+		.end	= -1,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device dm646x_mcasp0_device = {
+	.name		= "davinci-mcasp",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(dm646x_mcasp0_resources),
+	.resource	= dm646x_mcasp0_resources,
+};
+
+static struct platform_device dm646x_mcasp1_device = {
+	.name		= "davinci-mcasp",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(dm646x_mcasp1_resources),
+	.resource	= dm646x_mcasp1_resources,
+};
+
+static struct platform_device dm646x_dit_device = {
+	.name	= "spdif-dit",
+	.id	= -1,
+};
+
 /*----------------------------------------------------------------------*/
 
 static struct map_desc dm646x_io_desc[] = {
@@ -700,6 +761,19 @@ static struct davinci_soc_info davinci_soc_info_dm646x = {
 	.sram_len		= SZ_32K,
 };
 
+void __init dm646x_init_mcasp0(struct snd_platform_data *pdata)
+{
+	dm646x_mcasp0_device.dev.platform_data = pdata;
+	platform_device_register(&dm646x_mcasp0_device);
+}
+
+void __init dm646x_init_mcasp1(struct snd_platform_data *pdata)
+{
+	dm646x_mcasp1_device.dev.platform_data = pdata;
+	platform_device_register(&dm646x_mcasp1_device);
+	platform_device_register(&dm646x_dit_device);
+}
+
 void __init dm646x_init(void)
 {
 	davinci_common_init(&davinci_soc_info_dm646x);
diff --git a/arch/arm/mach-davinci/include/mach/asp.h b/arch/arm/mach-davinci/include/mach/asp.h
index e0abc437d79..038ecb7c231 100644
--- a/arch/arm/mach-davinci/include/mach/asp.h
+++ b/arch/arm/mach-davinci/include/mach/asp.h
@@ -5,21 +5,52 @@
 #define __ASM_ARCH_DAVINCI_ASP_H
 
 #include <mach/irqs.h>
+#include <mach/edma.h>
 
-/* Bases of register banks */
+/* Bases of dm644x and dm355 register banks */
 #define DAVINCI_ASP0_BASE	0x01E02000
 #define DAVINCI_ASP1_BASE	0x01E04000
 
-/* EDMA channels */
+/* Bases of dm646x register banks */
+#define	DAVINCI_DM646X_MCASP0_REG_BASE		0x01D01000
+#define DAVINCI_DM646X_MCASP1_REG_BASE		0x01D01800
+
+/* EDMA channels of dm644x and dm355 */
 #define DAVINCI_DMA_ASP0_TX	2
 #define DAVINCI_DMA_ASP0_RX	3
 #define DAVINCI_DMA_ASP1_TX	8
 #define DAVINCI_DMA_ASP1_RX	9
 
+/* EDMA channels of dm646x */
+#define	DAVINCI_DM646X_DMA_MCASP0_AXEVT0	6
+#define	DAVINCI_DM646X_DMA_MCASP0_AREVT0	9
+#define	DAVINCI_DM646X_DMA_MCASP1_AXEVT1	12
+
 /* Interrupts */
 #define DAVINCI_ASP0_RX_INT	IRQ_MBRINT
 #define DAVINCI_ASP0_TX_INT	IRQ_MBXINT
 #define DAVINCI_ASP1_RX_INT	IRQ_MBRINT
 #define DAVINCI_ASP1_TX_INT	IRQ_MBXINT
 
+struct snd_platform_data {
+	char *clk_name;
+	u32 tx_dma_offset;
+	u32 rx_dma_offset;
+	enum dma_event_q eventq_no;	/* event queue number */
+	unsigned int codec_fmt;
+
+	/* McASP specific fields */
+	int tdm_slots;
+	u8 op_mode;
+	u8 num_serializer;
+	u8 *serial_dir;
+};
+
+#define INACTIVE_MODE	0
+#define TX_MODE		1
+#define RX_MODE		2
+
+#define DAVINCI_MCASP_IIS_MODE	0
+#define DAVINCI_MCASP_DIT_MODE	1
+
 #endif /* __ASM_ARCH_DAVINCI_ASP_H */
diff --git a/arch/arm/mach-davinci/include/mach/dm355.h b/arch/arm/mach-davinci/include/mach/dm355.h
index 54903b72438..03faaef95a9 100644
--- a/arch/arm/mach-davinci/include/mach/dm355.h
+++ b/arch/arm/mach-davinci/include/mach/dm355.h
@@ -12,11 +12,16 @@
 #define __ASM_ARCH_DM355_H
 
 #include <mach/hardware.h>
+#include <mach/asp.h>
+
+#define ASP1_TX_EVT_EN	1
+#define ASP1_RX_EVT_EN	2
 
 struct spi_board_info;
 
 void __init dm355_init(void);
 void dm355_init_spi0(unsigned chipselect_mask,
 		struct spi_board_info *info, unsigned len);
+void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata);
 
 #endif /* __ASM_ARCH_DM355_H */
diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h
index 15d42b92a8c..8b157ceec0c 100644
--- a/arch/arm/mach-davinci/include/mach/dm644x.h
+++ b/arch/arm/mach-davinci/include/mach/dm644x.h
@@ -25,6 +25,7 @@
 #include <linux/platform_device.h>
 #include <mach/hardware.h>
 #include <mach/emac.h>
+#include <mach/asp.h>
 
 #define DM644X_EMAC_BASE		(0x01C80000)
 #define DM644X_EMAC_CNTRL_OFFSET	(0x0000)
@@ -34,5 +35,6 @@
 #define DM644X_EMAC_CNTRL_RAM_SIZE	(0x2000)
 
 void __init dm644x_init(void);
+void __init dm644x_init_asp(struct snd_platform_data *pdata);
 
 #endif /* __ASM_ARCH_DM644X_H */
diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h
index 1fc764c8646..05854846242 100644
--- a/arch/arm/mach-davinci/include/mach/dm646x.h
+++ b/arch/arm/mach-davinci/include/mach/dm646x.h
@@ -13,6 +13,7 @@
 
 #include <mach/hardware.h>
 #include <mach/emac.h>
+#include <mach/asp.h>
 
 #define DM646X_EMAC_BASE		(0x01C80000)
 #define DM646X_EMAC_CNTRL_OFFSET	(0x0000)
@@ -22,5 +23,7 @@
 #define DM646X_EMAC_CNTRL_RAM_SIZE	(0x2000)
 
 void __init dm646x_init(void);
+void __init dm646x_init_mcasp0(struct snd_platform_data *pdata);
+void __init dm646x_init_mcasp1(struct snd_platform_data *pdata);
 
 #endif /* __ASM_ARCH_DM646X_H */
-- 
cgit v1.2.3


From 88659988d5b01f83615ece5ad3183ce5672e2a7f Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Mon, 6 Jul 2009 14:39:25 -0700
Subject: davinci: Kconfig: update default config for 2.6.31-rc

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/configs/davinci_all_defconfig | 152 ++++++++++++++-------------------
 1 file changed, 65 insertions(+), 87 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index 6eb6d9da0dc..8c669ae94e3 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc7
-# Tue May 26 07:24:28 2009
+# Linux kernel version: 2.6.31-rc2
+# Mon Jul  6 14:38:31 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -9,7 +9,6 @@ CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,14 +17,13 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -62,8 +60,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -80,7 +77,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -93,8 +89,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -106,6 +107,11 @@ CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -118,7 +124,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -145,13 +151,14 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -160,26 +167,27 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 CONFIG_ARCH_DAVINCI=y
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
 CONFIG_AINTC=y
+CONFIG_ARCH_DAVINCI_DMx=y
 
 #
 # TI DaVinci Implementations
@@ -191,6 +199,7 @@ CONFIG_AINTC=y
 CONFIG_ARCH_DAVINCI_DM644x=y
 CONFIG_ARCH_DAVINCI_DM355=y
 CONFIG_ARCH_DAVINCI_DM646x=y
+# CONFIG_ARCH_DAVINCI_DA830 is not set
 CONFIG_ARCH_DAVINCI_DM365=y
 
 #
@@ -229,7 +238,6 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
 CONFIG_COMMON_CLKDEV=y
 
 #
@@ -254,7 +262,6 @@ CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -270,12 +277,13 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
 # CONFIG_LEDS_CPU is not set
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
@@ -417,6 +425,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -555,6 +564,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -566,6 +576,7 @@ CONFIG_MISC_DEVICES=y
 #
 CONFIG_EEPROM_AT24=y
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=m
@@ -611,10 +622,6 @@ CONFIG_BLK_DEV_SD=m
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -639,7 +646,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -686,6 +692,7 @@ CONFIG_DM9000_DEBUGLEVEL=4
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -755,6 +762,7 @@ CONFIG_KEYBOARD_ATKBD=m
 CONFIG_KEYBOARD_XTKBD=m
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_LM8323 is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
@@ -762,6 +770,7 @@ CONFIG_KEYBOARD_GPIO=y
 CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_AD7879_I2C is not set
 # CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
@@ -775,6 +784,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -834,6 +844,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
 CONFIG_I2C_DAVINCI=y
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
@@ -856,7 +867,6 @@ CONFIG_I2C_DAVINCI=y
 #
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -937,6 +947,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
@@ -988,52 +999,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=y
-CONFIG_MEDIA_TUNER_TDA8290=y
-CONFIG_MEDIA_TUNER_TDA9887=y
-CONFIG_MEDIA_TUNER_TEA5761=y
-CONFIG_MEDIA_TUNER_TEA5767=y
-CONFIG_MEDIA_TUNER_MT20XX=y
-CONFIG_MEDIA_TUNER_XC2028=y
-CONFIG_MEDIA_TUNER_XC5000=y
-CONFIG_MEDIA_TUNER_MC44S803=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_V4L_USB_DRIVERS is not set
-# CONFIG_RADIO_ADAPTERS is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1104,6 +1071,11 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
@@ -1145,7 +1117,7 @@ CONFIG_HID_BELKIN=m
 CONFIG_HID_CHERRY=m
 CONFIG_HID_CHICONY=m
 CONFIG_HID_CYPRESS=m
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=m
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=m
@@ -1162,10 +1134,11 @@ CONFIG_HID_PETALYNX=m
 CONFIG_HID_SAMSUNG=m
 CONFIG_HID_SONY=m
 CONFIG_HID_SUNPLUS=m
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -1268,6 +1241,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
@@ -1287,6 +1261,7 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
 # CONFIG_USB_GADGET_S3C2410 is not set
 # CONFIG_USB_GADGET_IMX is not set
 # CONFIG_USB_GADGET_M66592 is not set
@@ -1295,9 +1270,11 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_CI13XXX is not set
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
+# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
 CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
@@ -1313,7 +1290,7 @@ CONFIG_USB_CDC_COMPOSITE=m
 #
 CONFIG_USB_OTG_UTILS=y
 # CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_NOP_USB_XCEIV=m
 CONFIG_MMC=m
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
@@ -1330,7 +1307,6 @@ CONFIG_MMC_BLOCK=m
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_DAVINCI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
@@ -1342,7 +1318,7 @@ CONFIG_LEDS_CLASS=m
 # CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=m
 CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
 # CONFIG_LEDS_BD2802 is not set
 
@@ -1388,6 +1364,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1435,14 +1412,16 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
 # CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1625,6 +1604,7 @@ CONFIG_TIMER_STATS=y
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_RT_MUTEXES=y
 CONFIG_DEBUG_PI_LIST=y
@@ -1656,18 +1636,16 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
-- 
cgit v1.2.3


From 3e25d5f4fd7515a0a1e6b68025c483f53196a98c Mon Sep 17 00:00:00 2001
From: Hemant Pedanekar <hemantp@ti.com>
Date: Tue, 7 Jul 2009 19:49:41 +0530
Subject: davinci: dm646x: Add clock info and update mux setup for ATA

This patch adds clock data for IDE and also updates pin mux mask for ATA so as
to disable PCI when ATA is selected.

Signed-off-by: Hemant Pedanekar <hemantp@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/dm646x.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 199f288e03c..50f01e013aa 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -285,6 +285,13 @@ static struct clk timer2_clk = {
 	.flags = ALWAYS_ENABLED, /* no LPSC, always enabled; c.f. spruep9a */
 };
 
+
+static struct clk ide_clk = {
+	.name = "ide",
+	.parent = &pll1_sysclk4,
+	.lpsc = DAVINCI_LPSC_ATA,
+};
+
 static struct clk vpif0_clk = {
 	.name = "vpif0",
 	.parent = &ref_clk,
@@ -336,6 +343,7 @@ struct davinci_clk dm646x_clks[] = {
 	CLK(NULL, "timer0", &timer0_clk),
 	CLK(NULL, "timer1", &timer1_clk),
 	CLK("watchdog", NULL, &timer2_clk),
+	CLK("palm_bk3710", NULL, &ide_clk),
 	CLK(NULL, "vpif0", &vpif0_clk),
 	CLK(NULL, "vpif1", &vpif1_clk),
 	CLK(NULL, NULL, NULL),
@@ -399,7 +407,7 @@ static struct platform_device dm646x_emac_device = {
  */
 static const struct mux_config dm646x_pins[] = {
 #ifdef CONFIG_DAVINCI_MUX
-MUX_CFG(DM646X, ATAEN,		0,   0,     1,	  1,	 true)
+MUX_CFG(DM646X, ATAEN,		0,   0,     5,	  1,	 true)
 
 MUX_CFG(DM646X, AUDCK1,		0,   29,    1,	  0,	 false)
 
-- 
cgit v1.2.3


From 9eb7115bcc423ae022ebf1844820d58a77c2d435 Mon Sep 17 00:00:00 2001
From: Hemant Pedanekar <hemantp@ti.com>
Date: Wed, 24 Jun 2009 10:15:47 +0530
Subject: davinci: Move IO device mapping macros from io.h to hardware.h

This patch takes out IO mapping macros from mach/io.h and puts them in
mach/hardware.h avoiding need to include mach/io.h in various files such as
serial.h, vmalloc.h etc.

The main reason to avoid inclusion of mach/io.h is, when default in/out macros
are overridden by machine specific functions (e.g., in case of PCI I/O), they
result into linker error. An example snippet and error snapshot is listed below.

Following code in mach/io.h:

	#define inl(p)  my_inl()

	static inline unsigned int my_inl(unsigned int addr)
	{
		if (IS_PCI_IO(addr))
			return pci_inl ();
		else
			return le32_to_cpu(__raw_readl(__typesafe_io(addr)));
	}

leads to error:
	LD      arch/arm/boot/compressed/vmlinux
	arch/arm/boot/compressed/misc.o: In function `my_inl':
	misc.c:(.text+0x2744): undefined reference to `pci_inl'
	make[2]: *** [arch/arm/boot/compressed/vmlinux] Error 1

This is because mach/io.h gets included in arch/arm/boot/compressed/misc.c
through mach/serial.h but pci.c file, which defines 'pci_inl' doesn't get built
into compressed vmlinux.

Signed-off-by: Hemant Pedanekar <hemantp@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/include/mach/hardware.h | 17 +++++++++++++++++
 arch/arm/mach-davinci/include/mach/io.h       | 23 ++---------------------
 arch/arm/mach-davinci/include/mach/serial.h   |  2 +-
 arch/arm/mach-davinci/include/mach/vmalloc.h  |  2 +-
 4 files changed, 21 insertions(+), 23 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/include/mach/hardware.h b/arch/arm/mach-davinci/include/mach/hardware.h
index 48c77934d51..41c89386e39 100644
--- a/arch/arm/mach-davinci/include/mach/hardware.h
+++ b/arch/arm/mach-davinci/include/mach/hardware.h
@@ -24,4 +24,21 @@
 /* System control register offsets */
 #define DM64XX_VDD3P3V_PWDN	0x48
 
+/*
+ * I/O mapping
+ */
+#define IO_PHYS				0x01c00000
+#define IO_OFFSET			0xfd000000 /* Virtual IO = 0xfec00000 */
+#define IO_SIZE				0x00400000
+#define IO_VIRT				(IO_PHYS + IO_OFFSET)
+#define io_v2p(va)			((va) - IO_OFFSET)
+#define __IO_ADDRESS(x)			((x) + IO_OFFSET)
+#define IO_ADDRESS(pa)			IOMEM(__IO_ADDRESS(pa))
+
+#ifdef __ASSEMBLER__
+#define IOMEM(x)                	x
+#else
+#define IOMEM(x)                	((void __force __iomem *)(x))
+#endif
+
 #endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-davinci/include/mach/io.h b/arch/arm/mach-davinci/include/mach/io.h
index 2479785405a..62b0a90309a 100644
--- a/arch/arm/mach-davinci/include/mach/io.h
+++ b/arch/arm/mach-davinci/include/mach/io.h
@@ -13,18 +13,6 @@
 
 #define IO_SPACE_LIMIT 0xffffffff
 
-/*
- * ----------------------------------------------------------------------------
- * I/O mapping
- * ----------------------------------------------------------------------------
- */
-#define IO_PHYS		0x01c00000
-#define IO_OFFSET	0xfd000000 /* Virtual IO = 0xfec00000 */
-#define IO_SIZE		0x00400000
-#define IO_VIRT		(IO_PHYS + IO_OFFSET)
-#define io_v2p(va)	((va) - IO_OFFSET)
-#define __IO_ADDRESS(x)	((x) + IO_OFFSET)
-
 /*
  * We don't actually have real ISA nor PCI buses, but there is so many
  * drivers out there that might just work if we fake them...
@@ -33,19 +21,12 @@
 #define __mem_pci(a)		(a)
 #define __mem_isa(a)		(a)
 
-#define IO_ADDRESS(pa)          IOMEM(__IO_ADDRESS(pa))
-
-#ifdef __ASSEMBLER__
-#define IOMEM(x)                x
-#else
-#define IOMEM(x)                ((void __force __iomem *)(x))
-
+#ifndef __ASSEMBLER__
 #define __arch_ioremap(p, s, t)	davinci_ioremap(p, s, t)
 #define __arch_iounmap(v)	davinci_iounmap(v)
 
 void __iomem *davinci_ioremap(unsigned long phys, size_t size,
 			      unsigned int type);
 void davinci_iounmap(volatile void __iomem *addr);
-
-#endif /* __ASSEMBLER__ */
+#endif
 #endif /* __ASM_ARCH_IO_H */
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
index 57e68e610ee..a584697a9e7 100644
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -11,7 +11,7 @@
 #ifndef __ASM_ARCH_SERIAL_H
 #define __ASM_ARCH_SERIAL_H
 
-#include <mach/io.h>
+#include <mach/hardware.h>
 
 #define DAVINCI_MAX_NR_UARTS	3
 #define DAVINCI_UART0_BASE	(IO_PHYS + 0x20000)
diff --git a/arch/arm/mach-davinci/include/mach/vmalloc.h b/arch/arm/mach-davinci/include/mach/vmalloc.h
index ad51625b660..d49646a8e20 100644
--- a/arch/arm/mach-davinci/include/mach/vmalloc.h
+++ b/arch/arm/mach-davinci/include/mach/vmalloc.h
@@ -8,7 +8,7 @@
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
  */
-#include <mach/io.h>
+#include <mach/hardware.h>
 
 /* Allow vmalloc range until the IO virtual range minus a 2M "hole" */
 #define VMALLOC_END	  (IO_VIRT - (2<<20))
-- 
cgit v1.2.3


From baf09a4cd029c10fd46ef3d1505e2fe8cddcb48e Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Wed, 8 Jul 2009 08:32:27 -0700
Subject: davinci: da830: updates for mach-type name change

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-da830-evm.c          | 2 +-
 arch/arm/mach-davinci/include/mach/debug-macro.S | 2 +-
 arch/arm/mach-davinci/include/mach/uncompress.h  | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 0409eb67cfe..9185a706d14 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -116,7 +116,7 @@ static void __init da830_evm_map_io(void)
 	da830_init();
 }
 
-MACHINE_START(DAVINCI_DA8XX_EVM, "DaVinci DA830/OMAP L137 EVM")
+MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP L137 EVM")
 	.phys_io	= IO_PHYS,
 	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params	= (DA8XX_DDR_BASE + 0x100),
diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index 69837a67d5f..9d16277b233 100644
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -26,7 +26,7 @@
 		movne	\rx, #0xfe000000	@ virtual base
 #if defined(CONFIG_ARCH_DAVINCI_DA8XX) && defined(CONFIG_ARCH_DAVINCI_DMx)
 #error Cannot enable DaVinci and DA8XX platforms concurrently
-#elif defined(CONFIG_MACH_DAVINCI_DA8XX_EVM)
+#elif defined(CONFIG_MACH_DAVINCI_DA830_EVM)
 		orr	\rx, \rx, #0x00d00000	@ physical base address
 		orr	\rx, \rx, #0x0000d000	@ of UART 2
 #else
diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h
index 0f1f12b6787..46a0c3171e3 100644
--- a/arch/arm/mach-davinci/include/mach/uncompress.h
+++ b/arch/arm/mach-davinci/include/mach/uncompress.h
@@ -21,7 +21,7 @@ static u32 *uart;
 
 static u32 *get_uart_base(void)
 {
-	if (__machine_arch_type == MACH_TYPE_DAVINCI_DA8XX_EVM)
+	if (__machine_arch_type == MACH_TYPE_DAVINCI_DA830_EVM)
 		return (u32 *)DA8XX_UART2_BASE;
 	else
 		return (u32 *)DAVINCI_UART0_BASE;
-- 
cgit v1.2.3


From 6077d265324f13a4b7db30eb70cabed07fd58936 Mon Sep 17 00:00:00 2001
From: Sekhar Nori <nsekhar@ti.com>
Date: Thu, 9 Jul 2009 20:26:38 +0530
Subject: davinci: make arch_idle and arch_reset as inline functions

Make arch_idle and arch_reset inline as inline function.

Not having them inline leads to a warning of this sort when only
one of these functions is used:

arch/arm/mach-davinci/include/mach/system.h:24: warning: 'arch_reset' \
defined but not used

boot, re-boot tested on OMAP-L138 EVM

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/include/mach/system.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/include/mach/system.h b/arch/arm/mach-davinci/include/mach/system.h
index b7e7036674f..8e4f10fe126 100644
--- a/arch/arm/mach-davinci/include/mach/system.h
+++ b/arch/arm/mach-davinci/include/mach/system.h
@@ -16,12 +16,12 @@
 
 extern void davinci_watchdog_reset(void);
 
-static void arch_idle(void)
+static inline void arch_idle(void)
 {
 	cpu_do_idle();
 }
 
-static void arch_reset(char mode, const char *cmd)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	davinci_watchdog_reset();
 }
-- 
cgit v1.2.3


From 1c92a554fcad141f8c73eecdb1cc5ac0527a5c15 Mon Sep 17 00:00:00 2001
From: Hemant Pedanekar <hemantp@ti.com>
Date: Thu, 9 Jul 2009 19:43:20 +0530
Subject: davinci: dm646x: Add IDE setup

This patch adds platform data and init function for IDE which could be called
from board specific file to register IDE device.

Note that for 594MHz device the transfer mode is limited to UDMA4 since ideclk
rate is less than 100 MHz, which forces udma_mask in palm_bk3710.c to UDMA4,
while for 729MHz device, it is UDMA5.

Signed-off-by: Hemant Pedanekar <hemantp@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/dm646x.c              | 32 +++++++++++++++++++++++++++++
 arch/arm/mach-davinci/include/mach/dm646x.h |  3 +++
 2 files changed, 35 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 50f01e013aa..3516f7699db 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -600,6 +600,32 @@ static struct platform_device dm646x_edma_device = {
 	.resource		= edma_resources,
 };
 
+static struct resource ide_resources[] = {
+	{
+		.start          = DM646X_ATA_REG_BASE,
+		.end            = DM646X_ATA_REG_BASE + 0x7ff,
+		.flags          = IORESOURCE_MEM,
+	},
+	{
+		.start          = IRQ_DM646X_IDE,
+		.end            = IRQ_DM646X_IDE,
+		.flags          = IORESOURCE_IRQ,
+	},
+};
+
+static u64 ide_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device ide_dev = {
+	.name           = "palm_bk3710",
+	.id             = -1,
+	.resource       = ide_resources,
+	.num_resources  = ARRAY_SIZE(ide_resources),
+	.dev = {
+		.dma_mask		= &ide_dma_mask,
+		.coherent_dma_mask      = DMA_BIT_MASK(32),
+	},
+};
+
 static struct resource dm646x_mcasp0_resources[] = {
 	{
 		.name	= "mcasp0",
@@ -769,6 +795,12 @@ static struct davinci_soc_info davinci_soc_info_dm646x = {
 	.sram_len		= SZ_32K,
 };
 
+void __init dm646x_init_ide()
+{
+	davinci_cfg_reg(DM646X_ATAEN);
+	platform_device_register(&ide_dev);
+}
+
 void __init dm646x_init_mcasp0(struct snd_platform_data *pdata)
 {
 	dm646x_mcasp0_device.dev.platform_data = pdata;
diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h
index 05854846242..feb1e02cdbd 100644
--- a/arch/arm/mach-davinci/include/mach/dm646x.h
+++ b/arch/arm/mach-davinci/include/mach/dm646x.h
@@ -22,7 +22,10 @@
 #define DM646X_EMAC_MDIO_OFFSET		(0x4000)
 #define DM646X_EMAC_CNTRL_RAM_SIZE	(0x2000)
 
+#define DM646X_ATA_REG_BASE		(0x01C66000)
+
 void __init dm646x_init(void);
+void __init dm646x_init_ide(void);
 void __init dm646x_init_mcasp0(struct snd_platform_data *pdata);
 void __init dm646x_init_mcasp1(struct snd_platform_data *pdata);
 
-- 
cgit v1.2.3


From bea238f65c81742a03662e4664d88a9b4de5ea83 Mon Sep 17 00:00:00 2001
From: "Rajashekhara, Sudhakar" <sudhakar.raj@ti.com>
Date: Fri, 10 Jul 2009 02:08:31 -0400
Subject: davinci: Move the da830/omap-l137 #defines to header file

With the introduction of TI da850/omap-l138, some of the macros
defined for da830/omap-l137 will be needed in da850 source file.
So, move the common macros to da8xx.h header file.

Also, modify the macro names from DA830_... to DA8XX_.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/da830.c              | 22 +++++++---------------
 arch/arm/mach-davinci/include/mach/da8xx.h |  8 ++++++++
 2 files changed, 15 insertions(+), 15 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index ab4242869b6..999f69c9372 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -27,14 +27,6 @@
 #include "clock.h"
 #include "mux.h"
 
-#define DA830_PSC0_BASE		0x01c10000
-#define DA830_PLL0_BASE		0x01c11000
-#define DA830_JTAG_ID_REG	0x01c14018
-#define DA830_TIMER64P0_BASE	0x01c20000
-#define DA830_TIMER64P1_BASE	0x01c21000
-#define DA830_GPIO_BASE		0x01e26000
-#define DA830_PSC1_BASE		0x01e27000
-
 /* Offsets of the 8 compare registers on the da830 */
 #define DA830_CMP12_0		0x60
 #define DA830_CMP12_1		0x64
@@ -49,7 +41,7 @@
 
 static struct pll_data pll0_data = {
 	.num		= 1,
-	.phys_base	= DA830_PLL0_BASE,
+	.phys_base	= DA8XX_PLL0_BASE,
 	.flags		= PLL_HAS_PREDIV | PLL_HAS_POSTDIV,
 };
 
@@ -1174,8 +1166,8 @@ static struct map_desc da830_io_desc[] = {
 };
 
 static void __iomem *da830_psc_bases[] = {
-	IO_ADDRESS(DA830_PSC0_BASE),
-	IO_ADDRESS(DA830_PSC1_BASE),
+	IO_ADDRESS(DA8XX_PSC0_BASE),
+	IO_ADDRESS(DA8XX_PSC1_BASE),
 };
 
 /* Contents of JTAG ID register used to identify exact cpu type */
@@ -1191,14 +1183,14 @@ static struct davinci_id da830_ids[] = {
 
 static struct davinci_timer_instance da830_timer_instance[2] = {
 	{
-		.base		= IO_ADDRESS(DA830_TIMER64P0_BASE),
+		.base		= IO_ADDRESS(DA8XX_TIMER64P0_BASE),
 		.bottom_irq	= IRQ_DA8XX_TINT12_0,
 		.top_irq	= IRQ_DA8XX_TINT34_0,
 		.cmp_off	= DA830_CMP12_0,
 		.cmp_irq	= IRQ_DA830_T12CMPINT0_0,
 	},
 	{
-		.base		= IO_ADDRESS(DA830_TIMER64P1_BASE),
+		.base		= IO_ADDRESS(DA8XX_TIMER64P1_BASE),
 		.bottom_irq	= IRQ_DA8XX_TINT12_1,
 		.top_irq	= IRQ_DA8XX_TINT34_1,
 		.cmp_off	= DA830_CMP12_0,
@@ -1220,7 +1212,7 @@ static struct davinci_timer_info da830_timer_info = {
 static struct davinci_soc_info davinci_soc_info_da830 = {
 	.io_desc		= da830_io_desc,
 	.io_desc_num		= ARRAY_SIZE(da830_io_desc),
-	.jtag_id_base		= IO_ADDRESS(DA830_JTAG_ID_REG),
+	.jtag_id_base		= IO_ADDRESS(DA8XX_JTAG_ID_REG),
 	.ids			= da830_ids,
 	.ids_num		= ARRAY_SIZE(da830_ids),
 	.cpu_clks		= da830_clks,
@@ -1234,7 +1226,7 @@ static struct davinci_soc_info davinci_soc_info_da830 = {
 	.intc_irq_prios		= da830_default_priorities,
 	.intc_irq_num		= DA830_N_CP_INTC_IRQ,
 	.timer_info		= &da830_timer_info,
-	.gpio_base		= IO_ADDRESS(DA830_GPIO_BASE),
+	.gpio_base		= IO_ADDRESS(DA8XX_GPIO_BASE),
 	.gpio_num		= 128,
 	.gpio_irq		= IRQ_DA8XX_GPIO0,
 	.serial_dev		= &da8xx_serial_device,
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 084db271c7c..65b42431dde 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -29,6 +29,14 @@
 
 #define DA8XX_BOOT_CFG_BASE	(IO_PHYS + 0x14000)
 
+#define DA8XX_PSC0_BASE		0x01c10000
+#define DA8XX_PLL0_BASE		0x01c11000
+#define DA8XX_JTAG_ID_REG	0x01c14018
+#define DA8XX_TIMER64P0_BASE	0x01c20000
+#define DA8XX_TIMER64P1_BASE	0x01c21000
+#define DA8XX_GPIO_BASE		0x01e26000
+#define DA8XX_PSC1_BASE		0x01e27000
+
 void __init da830_init(void);
 
 int da8xx_register_edma(void);
-- 
cgit v1.2.3


From 2259bbd460c5c15567e2e311d0ab0fe763b40031 Mon Sep 17 00:00:00 2001
From: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Date: Fri, 10 Jul 2009 06:28:52 -0400
Subject: davinci: Pass proper EDMA CC interrupt number for DA830/OMAP-L137

In EDMA resource structure, instead of passing EDMA CC
interrupt, EDMA TC error interrupt number is being passed.

Before the patch:
	root@arago:~# cat /proc/interrupts
	           CPU0
	 12:          0     cp_intc  edma_error
	 13:          0     cp_intc  edma
	Err:

After the patch:
	root@arago:~# cat /proc/interrupts
	           CPU0
	 11:          0     cp_intc  edma
	 12:          0     cp_intc  edma_error
	Err:

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/devices-da8xx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index c367055ae9b..11c0971e13a 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -133,7 +133,7 @@ static struct resource da8xx_edma_resources[] = {
 	},
 	{
 		.name	= "edma0",
-		.start	= IRQ_DA8XX_TCERRINT0,
+		.start	= IRQ_DA8XX_CCINT0,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
-- 
cgit v1.2.3


From c96b56c53fb76c540a1a8103c7594859db4351dd Mon Sep 17 00:00:00 2001
From: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Date: Thu, 16 Jul 2009 05:45:32 -0400
Subject: davinci: Rearrange the da830/omap-l137 macros and functions

Rearrange the PINMUX macros and pinmux_setup function which
are common between da830/omap-l137 and da850/omap-l138.

Also, replace the da830 string in function names to da8xx.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-da830-evm.c    |  4 ++--
 arch/arm/mach-davinci/da830.c              | 35 ------------------------------
 arch/arm/mach-davinci/include/mach/da8xx.h | 23 +++++++++++++++++++-
 arch/arm/mach-davinci/mux.c                | 14 ++++++++++++
 4 files changed, 38 insertions(+), 38 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 9185a706d14..90256693b8d 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -61,7 +61,7 @@ static __init void da830_evm_init(void)
 		pr_warning("da830_evm_init: edma registration failed: %d\n",
 				ret);
 
-	ret = da830_pinmux_setup(da830_i2c0_pins);
+	ret = da8xx_pinmux_setup(da830_i2c0_pins);
 	if (ret)
 		pr_warning("da830_evm_init: i2c0 mux setup failed: %d\n",
 				ret);
@@ -75,7 +75,7 @@ static __init void da830_evm_init(void)
 	soc_info->emac_pdata->mdio_max_freq = DA830_EVM_MDIO_FREQUENCY;
 	soc_info->emac_pdata->rmii_en = 1;
 
-	ret = da830_pinmux_setup(da830_cpgmac_pins);
+	ret = da8xx_pinmux_setup(da830_cpgmac_pins);
 	if (ret)
 		pr_warning("da830_evm_init: cpgmac mux setup failed: %d\n",
 				ret);
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index 999f69c9372..3a9b6346c31 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -428,27 +428,6 @@ static struct davinci_clk da830_clks[] = {
 	CLK(NULL,		NULL,		NULL),
 };
 
-#define PINMUX0			0x00
-#define PINMUX1			0x04
-#define PINMUX2			0x08
-#define PINMUX3			0x0c
-#define PINMUX4			0x10
-#define PINMUX5			0x14
-#define PINMUX6			0x18
-#define PINMUX7			0x1c
-#define PINMUX8			0x20
-#define PINMUX9			0x24
-#define PINMUX10		0x28
-#define PINMUX11		0x2c
-#define PINMUX12		0x30
-#define PINMUX13		0x34
-#define PINMUX14		0x38
-#define PINMUX15		0x3c
-#define PINMUX16		0x40
-#define PINMUX17		0x44
-#define PINMUX18		0x48
-#define PINMUX19		0x4c
-
 /*
  * Device specific mux setup
  *
@@ -1036,20 +1015,6 @@ const short da830_eqep1_pins[] __initdata = {
 	-1
 };
 
-int da830_pinmux_setup(const short pins[])
-{
-	int i, error = -EINVAL;
-
-	if (pins)
-		for (i = 0; pins[i] >= 0; i++) {
-			error = davinci_cfg_reg(pins[i]);
-			if (error)
-				break;
-		}
-
-	return error;
-}
-
 /* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
 static u8 da830_default_priorities[DA830_N_CP_INTC_IRQ] = {
 	[IRQ_DA8XX_COMMTX]		= 7,
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 65b42431dde..8c8dc135472 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -37,6 +37,27 @@
 #define DA8XX_GPIO_BASE		0x01e26000
 #define DA8XX_PSC1_BASE		0x01e27000
 
+#define PINMUX0			0x00
+#define PINMUX1			0x04
+#define PINMUX2			0x08
+#define PINMUX3			0x0c
+#define PINMUX4			0x10
+#define PINMUX5			0x14
+#define PINMUX6			0x18
+#define PINMUX7			0x1c
+#define PINMUX8			0x20
+#define PINMUX9			0x24
+#define PINMUX10		0x28
+#define PINMUX11		0x2c
+#define PINMUX12		0x30
+#define PINMUX13		0x34
+#define PINMUX14		0x38
+#define PINMUX15		0x3c
+#define PINMUX16		0x40
+#define PINMUX17		0x44
+#define PINMUX18		0x48
+#define PINMUX19		0x4c
+
 void __init da830_init(void);
 
 int da8xx_register_edma(void);
@@ -72,6 +93,6 @@ extern const short da830_ecap2_pins[];
 extern const short da830_eqep0_pins[];
 extern const short da830_eqep1_pins[];
 
-int da830_pinmux_setup(const short pins[]);
+int da8xx_pinmux_setup(const short pins[]);
 
 #endif /* __ASM_ARCH_DAVINCI_DA8XX_H */
diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c
index d310f579aa8..898905e4894 100644
--- a/arch/arm/mach-davinci/mux.c
+++ b/arch/arm/mach-davinci/mux.c
@@ -91,3 +91,17 @@ int __init_or_module davinci_cfg_reg(const unsigned long index)
 	return 0;
 }
 EXPORT_SYMBOL(davinci_cfg_reg);
+
+int da8xx_pinmux_setup(const short pins[])
+{
+	int i, error = -EINVAL;
+
+	if (pins)
+		for (i = 0; pins[i] >= 0; i++) {
+			error = davinci_cfg_reg(pins[i]);
+			if (error)
+				break;
+		}
+
+	return error;
+}
-- 
cgit v1.2.3


From efd911814e303e00e6ed44e747b113a8644efede Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Date: Thu, 16 Jul 2009 19:58:53 +0400
Subject: davinci: DM646x: pass correct MUSB IRQs

DM646x has MUSB connected to IRQs 13 and 14 (unlike IRQ12 on other platforms),
so pass the correct IRQ resources with the platform device.

Signed-off-by: Dmitry Krivoschekov <dkrivoschekov@ru.mvista.com>
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/usb.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
index abedb633718..06f55931620 100644
--- a/arch/arm/mach-davinci/usb.c
+++ b/arch/arm/mach-davinci/usb.c
@@ -13,6 +13,7 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
+#include <mach/cputype.h>
 
 #define DAVINCI_USB_OTG_BASE 0x01C64000
 
@@ -64,6 +65,10 @@ static struct resource usb_resources[] = {
 		.start          = IRQ_USBINT,
 		.flags          = IORESOURCE_IRQ,
 	},
+	{
+		/* placeholder for the dedicated CPPI IRQ */
+		.flags          = IORESOURCE_IRQ,
+	},
 };
 
 static u64 usb_dmamask = DMA_BIT_MASK(32);
@@ -84,6 +89,14 @@ void __init setup_usb(unsigned mA, unsigned potpgt_msec)
 {
 	usb_data.power = mA / 2;
 	usb_data.potpgt = potpgt_msec / 2;
+
+	if (cpu_is_davinci_dm646x()) {
+		/* Override the defaults as DM6467 uses different IRQs. */
+		usb_dev.resource[1].start = IRQ_DM646X_USBINT;
+		usb_dev.resource[2].start = IRQ_DM646X_USBDMAINT;
+	} else	/* other devices don't have dedicated CPPI IRQ */
+		usb_dev.num_resources = 2;
+
 	platform_device_register(&usb_dev);
 }
 
-- 
cgit v1.2.3


From e1a8d7e2ea7c971f750b1adf0e98c3c8ed002623 Mon Sep 17 00:00:00 2001
From: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Date: Thu, 16 Jul 2009 06:41:54 -0400
Subject: davinci: Add base DA850/OMAP-L138 SoC support

The DA850/OMAP-L138 is a new SoC from TI in the same family as
DA830/OMAP-L137.

Major changes include better support for power management,
support for SATA devices and McBSP (same IP as DM644x).

DA850/OMAP-L138 documents are available at
http://focus.ti.com/docs/prod/folders/print/omap-l138.html.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/Kconfig                |   5 +
 arch/arm/mach-davinci/Makefile               |   1 +
 arch/arm/mach-davinci/da850.c                | 600 +++++++++++++++++++++++++++
 arch/arm/mach-davinci/include/mach/cputype.h |   8 +
 arch/arm/mach-davinci/include/mach/da8xx.h   |   7 +
 arch/arm/mach-davinci/include/mach/irqs.h    |  63 ++-
 arch/arm/mach-davinci/include/mach/mux.h     |  28 ++
 arch/arm/mach-davinci/include/mach/psc.h     |   3 +
 8 files changed, 712 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/mach-davinci/da850.c

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index 646c569b75e..1ee438ea979 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -33,6 +33,11 @@ config ARCH_DAVINCI_DA830
 	select CP_INTC
 	select ARCH_DAVINCI_DA8XX
 
+config ARCH_DAVINCI_DA850
+	bool "DA850/OMAP-L138 based system"
+	select CP_INTC
+	select ARCH_DAVINCI_DA8XX
+
 config ARCH_DAVINCI_DA8XX
 	bool
 
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index d183b11da46..5f8a661c35b 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_ARCH_DAVINCI_DM355)        += dm355.o devices.o
 obj-$(CONFIG_ARCH_DAVINCI_DM646x)       += dm646x.o devices.o
 obj-$(CONFIG_ARCH_DAVINCI_DM365)	+= dm365.o devices.o
 obj-$(CONFIG_ARCH_DAVINCI_DA830)        += da830.o devices-da8xx.o
+obj-$(CONFIG_ARCH_DAVINCI_DA850)        += da850.o devices-da8xx.o
 
 obj-$(CONFIG_AINTC)			+= irq.o
 obj-$(CONFIG_CP_INTC)			+= cp_intc.o
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
new file mode 100644
index 00000000000..332cf7fadb1
--- /dev/null
+++ b/arch/arm/mach-davinci/da850.c
@@ -0,0 +1,600 @@
+/*
+ * TI DA850/OMAP-L138 chip specific setup
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Derived from: arch/arm/mach-davinci/da830.c
+ * Original Copyrights follow:
+ *
+ * 2009 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/clock.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+#include <mach/irqs.h>
+#include <mach/cputype.h>
+#include <mach/common.h>
+#include <mach/time.h>
+#include <mach/da8xx.h>
+
+#include "clock.h"
+#include "mux.h"
+
+#define DA850_PLL1_BASE		0x01e1a000
+#define DA850_TIMER64P2_BASE	0x01f0c000
+#define DA850_TIMER64P3_BASE	0x01f0d000
+
+#define DA850_REF_FREQ		24000000
+
+static struct pll_data pll0_data = {
+	.num		= 1,
+	.phys_base	= DA8XX_PLL0_BASE,
+	.flags		= PLL_HAS_PREDIV | PLL_HAS_POSTDIV,
+};
+
+static struct clk ref_clk = {
+	.name		= "ref_clk",
+	.rate		= DA850_REF_FREQ,
+};
+
+static struct clk pll0_clk = {
+	.name		= "pll0",
+	.parent		= &ref_clk,
+	.pll_data	= &pll0_data,
+	.flags		= CLK_PLL,
+};
+
+static struct clk pll0_aux_clk = {
+	.name		= "pll0_aux_clk",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll0_sysclk2 = {
+	.name		= "pll0_sysclk2",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV2,
+};
+
+static struct clk pll0_sysclk3 = {
+	.name		= "pll0_sysclk3",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV3,
+};
+
+static struct clk pll0_sysclk4 = {
+	.name		= "pll0_sysclk4",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV4,
+};
+
+static struct clk pll0_sysclk5 = {
+	.name		= "pll0_sysclk5",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV5,
+};
+
+static struct clk pll0_sysclk6 = {
+	.name		= "pll0_sysclk6",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV6,
+};
+
+static struct clk pll0_sysclk7 = {
+	.name		= "pll0_sysclk7",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV7,
+};
+
+static struct pll_data pll1_data = {
+	.num		= 2,
+	.phys_base	= DA850_PLL1_BASE,
+	.flags		= PLL_HAS_POSTDIV,
+};
+
+static struct clk pll1_clk = {
+	.name		= "pll1",
+	.parent		= &ref_clk,
+	.pll_data	= &pll1_data,
+	.flags		= CLK_PLL,
+};
+
+static struct clk pll1_aux_clk = {
+	.name		= "pll1_aux_clk",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll1_sysclk2 = {
+	.name		= "pll1_sysclk2",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV2,
+};
+
+static struct clk pll1_sysclk3 = {
+	.name		= "pll1_sysclk3",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV3,
+};
+
+static struct clk pll1_sysclk4 = {
+	.name		= "pll1_sysclk4",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV4,
+};
+
+static struct clk pll1_sysclk5 = {
+	.name		= "pll1_sysclk5",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV5,
+};
+
+static struct clk pll1_sysclk6 = {
+	.name		= "pll0_sysclk6",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV6,
+};
+
+static struct clk pll1_sysclk7 = {
+	.name		= "pll1_sysclk7",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV7,
+};
+
+static struct clk i2c0_clk = {
+	.name		= "i2c0",
+	.parent		= &pll0_aux_clk,
+};
+
+static struct clk timerp64_0_clk = {
+	.name		= "timer0",
+	.parent		= &pll0_aux_clk,
+};
+
+static struct clk timerp64_1_clk = {
+	.name		= "timer1",
+	.parent		= &pll0_aux_clk,
+};
+
+static struct clk arm_rom_clk = {
+	.name		= "arm_rom",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_ARM_RAM_ROM,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk tpcc0_clk = {
+	.name		= "tpcc0",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_TPCC,
+	.flags		= ALWAYS_ENABLED | CLK_PSC,
+};
+
+static struct clk tptc0_clk = {
+	.name		= "tptc0",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_TPTC0,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk tptc1_clk = {
+	.name		= "tptc1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_TPTC1,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk tpcc1_clk = {
+	.name		= "tpcc1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA850_LPSC1_TPCC1,
+	.flags		= CLK_PSC | ALWAYS_ENABLED,
+	.psc_ctlr	= 1,
+};
+
+static struct clk tptc2_clk = {
+	.name		= "tptc2",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA850_LPSC1_TPTC2,
+	.flags		= ALWAYS_ENABLED,
+	.psc_ctlr	= 1,
+};
+
+static struct clk uart0_clk = {
+	.name		= "uart0",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_UART0,
+};
+
+static struct clk uart1_clk = {
+	.name		= "uart1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_UART1,
+	.psc_ctlr	= 1,
+};
+
+static struct clk uart2_clk = {
+	.name		= "uart2",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_UART2,
+	.psc_ctlr	= 1,
+};
+
+static struct clk aintc_clk = {
+	.name		= "aintc",
+	.parent		= &pll0_sysclk4,
+	.lpsc		= DA8XX_LPSC0_AINTC,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk gpio_clk = {
+	.name		= "gpio",
+	.parent		= &pll0_sysclk4,
+	.lpsc		= DA8XX_LPSC1_GPIO,
+	.psc_ctlr	= 1,
+};
+
+static struct clk i2c1_clk = {
+	.name		= "i2c1",
+	.parent		= &pll0_sysclk4,
+	.lpsc		= DA8XX_LPSC1_I2C,
+	.psc_ctlr	= 1,
+};
+
+static struct clk emif3_clk = {
+	.name		= "emif3",
+	.parent		= &pll0_sysclk5,
+	.lpsc		= DA8XX_LPSC1_EMIF3C,
+	.flags		= ALWAYS_ENABLED,
+	.psc_ctlr	= 1,
+};
+
+static struct clk arm_clk = {
+	.name		= "arm",
+	.parent		= &pll0_sysclk6,
+	.lpsc		= DA8XX_LPSC0_ARM,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk rmii_clk = {
+	.name		= "rmii",
+	.parent		= &pll0_sysclk7,
+};
+
+static struct davinci_clk da850_clks[] = {
+	CLK(NULL,		"ref",		&ref_clk),
+	CLK(NULL,		"pll0",		&pll0_clk),
+	CLK(NULL,		"pll0_aux",	&pll0_aux_clk),
+	CLK(NULL,		"pll0_sysclk2",	&pll0_sysclk2),
+	CLK(NULL,		"pll0_sysclk3",	&pll0_sysclk3),
+	CLK(NULL,		"pll0_sysclk4",	&pll0_sysclk4),
+	CLK(NULL,		"pll0_sysclk5",	&pll0_sysclk5),
+	CLK(NULL,		"pll0_sysclk6",	&pll0_sysclk6),
+	CLK(NULL,		"pll0_sysclk7",	&pll0_sysclk7),
+	CLK(NULL,		"pll1",		&pll1_clk),
+	CLK(NULL,		"pll1_aux",	&pll1_aux_clk),
+	CLK(NULL,		"pll1_sysclk2",	&pll1_sysclk2),
+	CLK(NULL,		"pll1_sysclk3",	&pll1_sysclk3),
+	CLK(NULL,		"pll1_sysclk4",	&pll1_sysclk4),
+	CLK(NULL,		"pll1_sysclk5",	&pll1_sysclk5),
+	CLK(NULL,		"pll1_sysclk6",	&pll1_sysclk6),
+	CLK(NULL,		"pll1_sysclk7",	&pll1_sysclk7),
+	CLK("i2c_davinci.1",	NULL,		&i2c0_clk),
+	CLK(NULL,		"timer0",	&timerp64_0_clk),
+	CLK("watchdog",		NULL,		&timerp64_1_clk),
+	CLK(NULL,		"arm_rom",	&arm_rom_clk),
+	CLK(NULL,		"tpcc0",	&tpcc0_clk),
+	CLK(NULL,		"tptc0",	&tptc0_clk),
+	CLK(NULL,		"tptc1",	&tptc1_clk),
+	CLK(NULL,		"tpcc1",	&tpcc1_clk),
+	CLK(NULL,		"tptc2",	&tptc2_clk),
+	CLK(NULL,		"uart0",	&uart0_clk),
+	CLK(NULL,		"uart1",	&uart1_clk),
+	CLK(NULL,		"uart2",	&uart2_clk),
+	CLK(NULL,		"aintc",	&aintc_clk),
+	CLK(NULL,		"gpio",		&gpio_clk),
+	CLK("i2c_davinci.2",	NULL,		&i2c1_clk),
+	CLK(NULL,		"emif3",	&emif3_clk),
+	CLK(NULL,		"arm",		&arm_clk),
+	CLK(NULL,		"rmii",		&rmii_clk),
+	CLK(NULL,		NULL,		NULL),
+};
+
+/*
+ * Device specific mux setup
+ *
+ *		soc	description	mux	mode	mode	mux	dbg
+ *					reg	offset	mask	mode
+ */
+static const struct mux_config da850_pins[] = {
+#ifdef CONFIG_DAVINCI_MUX
+	/* UART0 function */
+	MUX_CFG(DA850, NUART0_CTS,	3,	24,	15,	2,	false)
+	MUX_CFG(DA850, NUART0_RTS,	3,	28,	15,	2,	false)
+	MUX_CFG(DA850, UART0_RXD,	3,	16,	15,	2,	false)
+	MUX_CFG(DA850, UART0_TXD,	3,	20,	15,	2,	false)
+	/* UART1 function */
+	MUX_CFG(DA850, UART1_RXD,	4,	24,	15,	2,	false)
+	MUX_CFG(DA850, UART1_TXD,	4,	28,	15,	2,	false)
+	/* UART2 function */
+	MUX_CFG(DA850, UART2_RXD,	4,	16,	15,	2,	false)
+	MUX_CFG(DA850, UART2_TXD,	4,	20,	15,	2,	false)
+	/* I2C1 function */
+	MUX_CFG(DA850, I2C1_SCL,	4,	16,	15,	4,	false)
+	MUX_CFG(DA850, I2C1_SDA,	4,	20,	15,	4,	false)
+	/* I2C0 function */
+	MUX_CFG(DA850, I2C0_SDA,	4,	12,	15,	2,	false)
+	MUX_CFG(DA850, I2C0_SCL,	4,	8,	15,	2,	false)
+#endif
+};
+
+const short da850_uart0_pins[] __initdata = {
+	DA850_NUART0_CTS, DA850_NUART0_RTS, DA850_UART0_RXD, DA850_UART0_TXD,
+	-1
+};
+
+const short da850_uart1_pins[] __initdata = {
+	DA850_UART1_RXD, DA850_UART1_TXD,
+	-1
+};
+
+const short da850_uart2_pins[] __initdata = {
+	DA850_UART2_RXD, DA850_UART2_TXD,
+	-1
+};
+
+const short da850_i2c0_pins[] __initdata = {
+	DA850_I2C0_SDA, DA850_I2C0_SCL,
+	-1
+};
+
+const short da850_i2c1_pins[] __initdata = {
+	DA850_I2C1_SCL, DA850_I2C1_SDA,
+	-1
+};
+
+/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
+static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = {
+	[IRQ_DA8XX_COMMTX]		= 7,
+	[IRQ_DA8XX_COMMRX]		= 7,
+	[IRQ_DA8XX_NINT]		= 7,
+	[IRQ_DA8XX_EVTOUT0]		= 7,
+	[IRQ_DA8XX_EVTOUT1]		= 7,
+	[IRQ_DA8XX_EVTOUT2]		= 7,
+	[IRQ_DA8XX_EVTOUT3]		= 7,
+	[IRQ_DA8XX_EVTOUT4]		= 7,
+	[IRQ_DA8XX_EVTOUT5]		= 7,
+	[IRQ_DA8XX_EVTOUT6]		= 7,
+	[IRQ_DA8XX_EVTOUT6]		= 7,
+	[IRQ_DA8XX_EVTOUT7]		= 7,
+	[IRQ_DA8XX_CCINT0]		= 7,
+	[IRQ_DA8XX_CCERRINT]		= 7,
+	[IRQ_DA8XX_TCERRINT0]		= 7,
+	[IRQ_DA8XX_AEMIFINT]		= 7,
+	[IRQ_DA8XX_I2CINT0]		= 7,
+	[IRQ_DA8XX_MMCSDINT0]		= 7,
+	[IRQ_DA8XX_MMCSDINT1]		= 7,
+	[IRQ_DA8XX_ALLINT0]		= 7,
+	[IRQ_DA8XX_RTC]			= 7,
+	[IRQ_DA8XX_SPINT0]		= 7,
+	[IRQ_DA8XX_TINT12_0]		= 7,
+	[IRQ_DA8XX_TINT34_0]		= 7,
+	[IRQ_DA8XX_TINT12_1]		= 7,
+	[IRQ_DA8XX_TINT34_1]		= 7,
+	[IRQ_DA8XX_UARTINT0]		= 7,
+	[IRQ_DA8XX_KEYMGRINT]		= 7,
+	[IRQ_DA8XX_SECINT]		= 7,
+	[IRQ_DA8XX_SECKEYERR]		= 7,
+	[IRQ_DA850_MPUADDRERR0]		= 7,
+	[IRQ_DA850_MPUPROTERR0]		= 7,
+	[IRQ_DA850_IOPUADDRERR0]	= 7,
+	[IRQ_DA850_IOPUPROTERR0]	= 7,
+	[IRQ_DA850_IOPUADDRERR1]	= 7,
+	[IRQ_DA850_IOPUPROTERR1]	= 7,
+	[IRQ_DA850_IOPUADDRERR2]	= 7,
+	[IRQ_DA850_IOPUPROTERR2]	= 7,
+	[IRQ_DA850_BOOTCFG_ADDR_ERR]	= 7,
+	[IRQ_DA850_BOOTCFG_PROT_ERR]	= 7,
+	[IRQ_DA850_MPUADDRERR1]		= 7,
+	[IRQ_DA850_MPUPROTERR1]		= 7,
+	[IRQ_DA850_IOPUADDRERR3]	= 7,
+	[IRQ_DA850_IOPUPROTERR3]	= 7,
+	[IRQ_DA850_IOPUADDRERR4]	= 7,
+	[IRQ_DA850_IOPUPROTERR4]	= 7,
+	[IRQ_DA850_IOPUADDRERR5]	= 7,
+	[IRQ_DA850_IOPUPROTERR5]	= 7,
+	[IRQ_DA850_MIOPU_BOOTCFG_ERR]	= 7,
+	[IRQ_DA8XX_CHIPINT0]		= 7,
+	[IRQ_DA8XX_CHIPINT1]		= 7,
+	[IRQ_DA8XX_CHIPINT2]		= 7,
+	[IRQ_DA8XX_CHIPINT3]		= 7,
+	[IRQ_DA8XX_TCERRINT1]		= 7,
+	[IRQ_DA8XX_C0_RX_THRESH_PULSE]	= 7,
+	[IRQ_DA8XX_C0_RX_PULSE]		= 7,
+	[IRQ_DA8XX_C0_TX_PULSE]		= 7,
+	[IRQ_DA8XX_C0_MISC_PULSE]	= 7,
+	[IRQ_DA8XX_C1_RX_THRESH_PULSE]	= 7,
+	[IRQ_DA8XX_C1_RX_PULSE]		= 7,
+	[IRQ_DA8XX_C1_TX_PULSE]		= 7,
+	[IRQ_DA8XX_C1_MISC_PULSE]	= 7,
+	[IRQ_DA8XX_MEMERR]		= 7,
+	[IRQ_DA8XX_GPIO0]		= 7,
+	[IRQ_DA8XX_GPIO1]		= 7,
+	[IRQ_DA8XX_GPIO2]		= 7,
+	[IRQ_DA8XX_GPIO3]		= 7,
+	[IRQ_DA8XX_GPIO4]		= 7,
+	[IRQ_DA8XX_GPIO5]		= 7,
+	[IRQ_DA8XX_GPIO6]		= 7,
+	[IRQ_DA8XX_GPIO7]		= 7,
+	[IRQ_DA8XX_GPIO8]		= 7,
+	[IRQ_DA8XX_I2CINT1]		= 7,
+	[IRQ_DA8XX_LCDINT]		= 7,
+	[IRQ_DA8XX_UARTINT1]		= 7,
+	[IRQ_DA8XX_MCASPINT]		= 7,
+	[IRQ_DA8XX_ALLINT1]		= 7,
+	[IRQ_DA8XX_SPINT1]		= 7,
+	[IRQ_DA8XX_UHPI_INT1]		= 7,
+	[IRQ_DA8XX_USB_INT]		= 7,
+	[IRQ_DA8XX_IRQN]		= 7,
+	[IRQ_DA8XX_RWAKEUP]		= 7,
+	[IRQ_DA8XX_UARTINT2]		= 7,
+	[IRQ_DA8XX_DFTSSINT]		= 7,
+	[IRQ_DA8XX_EHRPWM0]		= 7,
+	[IRQ_DA8XX_EHRPWM0TZ]		= 7,
+	[IRQ_DA8XX_EHRPWM1]		= 7,
+	[IRQ_DA8XX_EHRPWM1TZ]		= 7,
+	[IRQ_DA850_SATAINT]		= 7,
+	[IRQ_DA850_TINT12_2]		= 7,
+	[IRQ_DA850_TINT34_2]		= 7,
+	[IRQ_DA850_TINTALL_2]		= 7,
+	[IRQ_DA8XX_ECAP0]		= 7,
+	[IRQ_DA8XX_ECAP1]		= 7,
+	[IRQ_DA8XX_ECAP2]		= 7,
+	[IRQ_DA850_MMCSDINT0_1]		= 7,
+	[IRQ_DA850_MMCSDINT1_1]		= 7,
+	[IRQ_DA850_T12CMPINT0_2]	= 7,
+	[IRQ_DA850_T12CMPINT1_2]	= 7,
+	[IRQ_DA850_T12CMPINT2_2]	= 7,
+	[IRQ_DA850_T12CMPINT3_2]	= 7,
+	[IRQ_DA850_T12CMPINT4_2]	= 7,
+	[IRQ_DA850_T12CMPINT5_2]	= 7,
+	[IRQ_DA850_T12CMPINT6_2]	= 7,
+	[IRQ_DA850_T12CMPINT7_2]	= 7,
+	[IRQ_DA850_T12CMPINT0_3]	= 7,
+	[IRQ_DA850_T12CMPINT1_3]	= 7,
+	[IRQ_DA850_T12CMPINT2_3]	= 7,
+	[IRQ_DA850_T12CMPINT3_3]	= 7,
+	[IRQ_DA850_T12CMPINT4_3]	= 7,
+	[IRQ_DA850_T12CMPINT5_3]	= 7,
+	[IRQ_DA850_T12CMPINT6_3]	= 7,
+	[IRQ_DA850_T12CMPINT7_3]	= 7,
+	[IRQ_DA850_RPIINT]		= 7,
+	[IRQ_DA850_VPIFINT]		= 7,
+	[IRQ_DA850_CCINT1]		= 7,
+	[IRQ_DA850_CCERRINT1]		= 7,
+	[IRQ_DA850_TCERRINT2]		= 7,
+	[IRQ_DA850_TINT12_3]		= 7,
+	[IRQ_DA850_TINT34_3]		= 7,
+	[IRQ_DA850_TINTALL_3]		= 7,
+	[IRQ_DA850_MCBSP0RINT]		= 7,
+	[IRQ_DA850_MCBSP0XINT]		= 7,
+	[IRQ_DA850_MCBSP1RINT]		= 7,
+	[IRQ_DA850_MCBSP1XINT]		= 7,
+	[IRQ_DA8XX_ARMCLKSTOPREQ]	= 7,
+};
+
+static struct map_desc da850_io_desc[] = {
+	{
+		.virtual	= IO_VIRT,
+		.pfn		= __phys_to_pfn(IO_PHYS),
+		.length		= IO_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= DA8XX_CP_INTC_VIRT,
+		.pfn		= __phys_to_pfn(DA8XX_CP_INTC_BASE),
+		.length		= DA8XX_CP_INTC_SIZE,
+		.type		= MT_DEVICE
+	},
+};
+
+static void __iomem *da850_psc_bases[] = {
+	IO_ADDRESS(DA8XX_PSC0_BASE),
+	IO_ADDRESS(DA8XX_PSC1_BASE),
+};
+
+/* Contents of JTAG ID register used to identify exact cpu type */
+static struct davinci_id da850_ids[] = {
+	{
+		.variant	= 0x0,
+		.part_no	= 0xb7d1,
+		.manufacturer	= 0x017,	/* 0x02f >> 1 */
+		.cpu_id		= DAVINCI_CPU_ID_DA850,
+		.name		= "da850/omap-l138",
+	},
+};
+
+static struct davinci_timer_instance da850_timer_instance[4] = {
+	{
+		.base		= IO_ADDRESS(DA8XX_TIMER64P0_BASE),
+		.bottom_irq	= IRQ_DA8XX_TINT12_0,
+		.top_irq	= IRQ_DA8XX_TINT34_0,
+	},
+	{
+		.base		= IO_ADDRESS(DA8XX_TIMER64P1_BASE),
+		.bottom_irq	= IRQ_DA8XX_TINT12_1,
+		.top_irq	= IRQ_DA8XX_TINT34_1,
+	},
+	{
+		.base		= IO_ADDRESS(DA850_TIMER64P2_BASE),
+		.bottom_irq	= IRQ_DA850_TINT12_2,
+		.top_irq	= IRQ_DA850_TINT34_2,
+	},
+	{
+		.base		= IO_ADDRESS(DA850_TIMER64P3_BASE),
+		.bottom_irq	= IRQ_DA850_TINT12_3,
+		.top_irq	= IRQ_DA850_TINT34_3,
+	},
+};
+
+/*
+ * T0_BOT: Timer 0, bottom		: Used for clock_event
+ * T0_TOP: Timer 0, top			: Used for clocksource
+ * T1_BOT, T1_TOP: Timer 1, bottom & top: Used for watchdog timer
+ */
+static struct davinci_timer_info da850_timer_info = {
+	.timers		= da850_timer_instance,
+	.clockevent_id	= T0_BOT,
+	.clocksource_id	= T0_TOP,
+};
+
+static struct davinci_soc_info davinci_soc_info_da850 = {
+	.io_desc		= da850_io_desc,
+	.io_desc_num		= ARRAY_SIZE(da850_io_desc),
+	.jtag_id_base		= IO_ADDRESS(DA8XX_JTAG_ID_REG),
+	.ids			= da850_ids,
+	.ids_num		= ARRAY_SIZE(da850_ids),
+	.cpu_clks		= da850_clks,
+	.psc_bases		= da850_psc_bases,
+	.psc_bases_num		= ARRAY_SIZE(da850_psc_bases),
+	.pinmux_base		= IO_ADDRESS(DA8XX_BOOT_CFG_BASE + 0x120),
+	.pinmux_pins		= da850_pins,
+	.pinmux_pins_num	= ARRAY_SIZE(da850_pins),
+	.intc_base		= (void __iomem *)DA8XX_CP_INTC_VIRT,
+	.intc_type		= DAVINCI_INTC_TYPE_CP_INTC,
+	.intc_irq_prios		= da850_default_priorities,
+	.intc_irq_num		= DA850_N_CP_INTC_IRQ,
+	.timer_info		= &da850_timer_info,
+	.gpio_base		= IO_ADDRESS(DA8XX_GPIO_BASE),
+	.gpio_num		= 128,
+	.gpio_irq		= IRQ_DA8XX_GPIO0,
+	.serial_dev		= &da8xx_serial_device,
+	.emac_pdata		= &da8xx_emac_pdata,
+};
+
+void __init da850_init(void)
+{
+	davinci_common_init(&davinci_soc_info_da850);
+}
diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h
index fd41189e5c6..189b1ff1364 100644
--- a/arch/arm/mach-davinci/include/mach/cputype.h
+++ b/arch/arm/mach-davinci/include/mach/cputype.h
@@ -32,6 +32,7 @@ struct davinci_id {
 #define	DAVINCI_CPU_ID_DM355		0x03550000
 #define	DAVINCI_CPU_ID_DM365		0x03650000
 #define	DAVINCI_CPU_ID_DA830		0x08300000
+#define	DAVINCI_CPU_ID_DA850		0x08500000
 
 #define IS_DAVINCI_CPU(type, id)					\
 static inline int is_davinci_ ##type(void)				\
@@ -44,6 +45,7 @@ IS_DAVINCI_CPU(dm646x, DAVINCI_CPU_ID_DM6467)
 IS_DAVINCI_CPU(dm355, DAVINCI_CPU_ID_DM355)
 IS_DAVINCI_CPU(dm365, DAVINCI_CPU_ID_DM365)
 IS_DAVINCI_CPU(da830, DAVINCI_CPU_ID_DA830)
+IS_DAVINCI_CPU(da850, DAVINCI_CPU_ID_DA850)
 
 #ifdef CONFIG_ARCH_DAVINCI_DM644x
 #define cpu_is_davinci_dm644x() is_davinci_dm644x()
@@ -75,4 +77,10 @@ IS_DAVINCI_CPU(da830, DAVINCI_CPU_ID_DA830)
 #define cpu_is_davinci_da830() 0
 #endif
 
+#ifdef CONFIG_ARCH_DAVINCI_DA850
+#define cpu_is_davinci_da850() is_davinci_da850()
+#else
+#define cpu_is_davinci_da850() 0
+#endif
+
 #endif
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 8c8dc135472..594f9882e42 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -59,6 +59,7 @@
 #define PINMUX19		0x4c
 
 void __init da830_init(void);
+void __init da850_init(void);
 
 int da8xx_register_edma(void);
 int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata);
@@ -93,6 +94,12 @@ extern const short da830_ecap2_pins[];
 extern const short da830_eqep0_pins[];
 extern const short da830_eqep1_pins[];
 
+extern const short da850_uart0_pins[];
+extern const short da850_uart1_pins[];
+extern const short da850_uart2_pins[];
+extern const short da850_i2c0_pins[];
+extern const short da850_i2c1_pins[];
+
 int da8xx_pinmux_setup(const short pins[]);
 
 #endif /* __ASM_ARCH_DAVINCI_DA8XX_H */
diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h
index 735e378d27e..6047c2d9da3 100644
--- a/arch/arm/mach-davinci/include/mach/irqs.h
+++ b/arch/arm/mach-davinci/include/mach/irqs.h
@@ -340,9 +340,66 @@
 
 #define DA830_N_CP_INTC_IRQ		96
 
-/* da830 currently has the most gpio pins (128) */
+/* DA850 speicific interrupts */
+#define IRQ_DA850_MPUADDRERR0		27
+#define IRQ_DA850_MPUPROTERR0		27
+#define IRQ_DA850_IOPUADDRERR0		27
+#define IRQ_DA850_IOPUPROTERR0		27
+#define IRQ_DA850_IOPUADDRERR1		27
+#define IRQ_DA850_IOPUPROTERR1		27
+#define IRQ_DA850_IOPUADDRERR2		27
+#define IRQ_DA850_IOPUPROTERR2		27
+#define IRQ_DA850_BOOTCFG_ADDR_ERR	27
+#define IRQ_DA850_BOOTCFG_PROT_ERR	27
+#define IRQ_DA850_MPUADDRERR1		27
+#define IRQ_DA850_MPUPROTERR1		27
+#define IRQ_DA850_IOPUADDRERR3		27
+#define IRQ_DA850_IOPUPROTERR3		27
+#define IRQ_DA850_IOPUADDRERR4		27
+#define IRQ_DA850_IOPUPROTERR4		27
+#define IRQ_DA850_IOPUADDRERR5		27
+#define IRQ_DA850_IOPUPROTERR5		27
+#define IRQ_DA850_MIOPU_BOOTCFG_ERR	27
+#define IRQ_DA850_SATAINT		67
+#define IRQ_DA850_TINT12_2		68
+#define IRQ_DA850_TINT34_2		68
+#define IRQ_DA850_TINTALL_2		68
+#define IRQ_DA850_MMCSDINT0_1		72
+#define IRQ_DA850_MMCSDINT1_1		73
+#define IRQ_DA850_T12CMPINT0_2		74
+#define IRQ_DA850_T12CMPINT1_2		75
+#define IRQ_DA850_T12CMPINT2_2		76
+#define IRQ_DA850_T12CMPINT3_2		77
+#define IRQ_DA850_T12CMPINT4_2		78
+#define IRQ_DA850_T12CMPINT5_2		79
+#define IRQ_DA850_T12CMPINT6_2		80
+#define IRQ_DA850_T12CMPINT7_2		81
+#define IRQ_DA850_T12CMPINT0_3		82
+#define IRQ_DA850_T12CMPINT1_3		83
+#define IRQ_DA850_T12CMPINT2_3		84
+#define IRQ_DA850_T12CMPINT3_3		85
+#define IRQ_DA850_T12CMPINT4_3		86
+#define IRQ_DA850_T12CMPINT5_3		87
+#define IRQ_DA850_T12CMPINT6_3		88
+#define IRQ_DA850_T12CMPINT7_3		89
+#define IRQ_DA850_RPIINT		91
+#define IRQ_DA850_VPIFINT		92
+#define IRQ_DA850_CCINT1		93
+#define IRQ_DA850_CCERRINT1		94
+#define IRQ_DA850_TCERRINT2		95
+#define IRQ_DA850_TINT12_3		96
+#define IRQ_DA850_TINT34_3		96
+#define IRQ_DA850_TINTALL_3		96
+#define IRQ_DA850_MCBSP0RINT		97
+#define IRQ_DA850_MCBSP0XINT		98
+#define IRQ_DA850_MCBSP1RINT		99
+#define IRQ_DA850_MCBSP1XINT		100
+
+#define DA850_N_CP_INTC_IRQ		101
+
+/* da830/da850 currently has the most gpio pins (128) */
 #define DAVINCI_N_GPIO			128
-/* da830 currently has the most irqs so use DA830_N_CP_INTC_IRQ */
-#define NR_IRQS				(DA830_N_CP_INTC_IRQ + DAVINCI_N_GPIO)
+/* da850 currently has the most irqs so use DA850_N_CP_INTC_IRQ */
+#define NR_IRQS				(DA850_N_CP_INTC_IRQ + DAVINCI_N_GPIO)
 
 #endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index cce7509ea30..3349fa5f82e 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -704,6 +704,34 @@ enum da830_index {
 	DA830_GPIO2_10,
 };
 
+enum davinci_da850_index {
+	/* UART0 function */
+	DA850_NUART0_CTS,
+	DA850_NUART0_RTS,
+	DA850_UART0_RXD,
+	DA850_UART0_TXD,
+
+	/* UART1 function */
+	DA850_NUART1_CTS,
+	DA850_NUART1_RTS,
+	DA850_UART1_RXD,
+	DA850_UART1_TXD,
+
+	/* UART2 function */
+	DA850_NUART2_CTS,
+	DA850_NUART2_RTS,
+	DA850_UART2_RXD,
+	DA850_UART2_TXD,
+
+	/* I2C1 function */
+	DA850_I2C1_SCL,
+	DA850_I2C1_SDA,
+
+	/* I2C0 function */
+	DA850_I2C0_SDA,
+	DA850_I2C0_SCL,
+};
+
 #ifdef CONFIG_DAVINCI_MUX
 /* setup pin muxing */
 extern int davinci_cfg_reg(unsigned long reg_cfg);
diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h
index 6b9621d8828..171173c1dba 100644
--- a/arch/arm/mach-davinci/include/mach/psc.h
+++ b/arch/arm/mach-davinci/include/mach/psc.h
@@ -155,6 +155,7 @@
 #define DA8XX_LPSC0_GEM			15
 
 /* PSC1 defines */
+#define DA850_LPSC1_TPCC1		0
 #define DA8XX_LPSC1_USB20		1
 #define DA8XX_LPSC1_USB11		2
 #define DA8XX_LPSC1_GPIO		3
@@ -163,6 +164,7 @@
 #define DA8XX_LPSC1_EMIF3C		6
 #define DA8XX_LPSC1_McASP0		7
 #define DA830_LPSC1_McASP1		8
+#define DA850_LPSC1_SATA		8
 #define DA830_LPSC1_McASP2		9
 #define DA8XX_LPSC1_SPI1		10
 #define DA8XX_LPSC1_I2C			11
@@ -172,6 +174,7 @@
 #define DA8XX_LPSC1_PWM			17
 #define DA8XX_LPSC1_ECAP		20
 #define DA830_LPSC1_EQEP		21
+#define DA850_LPSC1_TPTC2		21
 #define DA8XX_LPSC1_SCR_P0_SS		24
 #define DA8XX_LPSC1_SCR_P1_SS		25
 #define DA8XX_LPSC1_CR_P3_SS		26
-- 
cgit v1.2.3


From 0fbc5592158db4e1ca2037178e1ea6733ccc6f61 Mon Sep 17 00:00:00 2001
From: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Date: Thu, 16 Jul 2009 06:42:18 -0400
Subject: davinci: Add support for DA850/OMAP-L138 EVM board

Add support for the DA850/OMAP-L138 Evaluation Module (EVM)
from TI.  The EVM has User Interface (UI) card which contains
various devices. This UI card can be connected to the base
board. Support for all the devices on the UI card and ones on
the EVM will be added in subsequent patches.

The EVM schematics are not available publicly yet; but should
be available soon.

A new defconfig for this board has been added mainly because
the DA830/OMAP-L137 defconfig forces writethrough cache mode
which is not required on DA850/OMAP-L138.

This patch has been boot tested on DA850/OMAP-L138 EVM
using ramdisk as filesystem.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/configs/da850_omapl138_defconfig        | 1229 ++++++++++++++++++++++
 arch/arm/mach-davinci/Kconfig                    |    7 +
 arch/arm/mach-davinci/Makefile                   |    1 +
 arch/arm/mach-davinci/board-da850-evm.c          |  102 ++
 arch/arm/mach-davinci/include/mach/debug-macro.S |    3 +-
 arch/arm/mach-davinci/include/mach/uncompress.h  |    3 +-
 6 files changed, 1343 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/configs/da850_omapl138_defconfig
 create mode 100644 arch/arm/mach-davinci/board-da850-evm.c

(limited to 'arch/arm')

diff --git a/arch/arm/configs/da850_omapl138_defconfig b/arch/arm/configs/da850_omapl138_defconfig
new file mode 100644
index 00000000000..842a70b079b
--- /dev/null
+++ b/arch/arm/configs/da850_omapl138_defconfig
@@ -0,0 +1,1229 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-davinci1
+# Mon Jun 29 07:54:15 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+CONFIG_ARCH_DAVINCI=y
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+CONFIG_CP_INTC=y
+
+#
+# TI DaVinci Implementations
+#
+
+#
+# DaVinci Core Type
+#
+# CONFIG_ARCH_DAVINCI_DM644x is not set
+# CONFIG_ARCH_DAVINCI_DM355 is not set
+# CONFIG_ARCH_DAVINCI_DM646x is not set
+# CONFIG_ARCH_DAVINCI_DA830 is not set
+CONFIG_ARCH_DAVINCI_DA850=y
+CONFIG_ARCH_DAVINCI_DA8XX=y
+# CONFIG_ARCH_DAVINCI_DM365 is not set
+
+#
+# DaVinci Board Type
+#
+CONFIG_MACH_DAVINCI_DA850_EVM=y
+CONFIG_DAVINCI_MUX=y
+# CONFIG_DAVINCI_MUX_DEBUG is not set
+# CONFIG_DAVINCI_MUX_WARNINGS is not set
+CONFIG_DAVINCI_RESET_CLOCKS=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_LEDS=y
+# CONFIG_LEDS_CPU is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+CONFIG_LXT_PHY=y
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+CONFIG_LSI_ET1011C_PHY=y
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_TI_DAVINCI_EMAC is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_EVBUG=m
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_XTKBD=m
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+# CONFIG_VT_CONSOLE is not set
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_DAVINCI=y
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+CONFIG_GPIO_PCF857X=m
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_DAVINCI_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=m
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SOC=m
+CONFIG_SND_DAVINCI_SOC=m
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=m
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index 1ee438ea979..40866c643f1 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -101,6 +101,13 @@ config MACH_DAVINCI_DA830_EVM
 	help
 	  Say Y here to select the TI DA830/OMAP-L137 Evaluation Module.
 
+config MACH_DAVINCI_DA850_EVM
+	bool "TI DA850/OMAP-L138 Reference Platform"
+	default ARCH_DAVINCI_DA850
+	depends on ARCH_DAVINCI_DA850
+	help
+	  Say Y here to select the TI DA850/OMAP-L138 Evaluation Module.
+
 config DAVINCI_MUX
 	bool "DAVINCI multiplexing support"
 	depends on ARCH_DAVINCI
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 5f8a661c35b..2e11e847313 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -28,3 +28,4 @@ obj-$(CONFIG_MACH_DM355_LEOPARD)	+= board-dm355-leopard.o
 obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM)	+= board-dm646x-evm.o
 obj-$(CONFIG_MACH_DAVINCI_DM365_EVM)	+= board-dm365-evm.o
 obj-$(CONFIG_MACH_DAVINCI_DA830_EVM)	+= board-da830-evm.o
+obj-$(CONFIG_MACH_DAVINCI_DA850_EVM)	+= board-da850-evm.o
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
new file mode 100644
index 00000000000..eaa1fc1bc5f
--- /dev/null
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -0,0 +1,102 @@
+/*
+ * TI DA850/OMAP-L138 EVM board
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Derived from: arch/arm/mach-davinci/board-da830-evm.c
+ * Original Copyrights follow:
+ *
+ * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/irqs.h>
+#include <mach/cp_intc.h>
+#include <mach/da8xx.h>
+
+static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
+	.bus_freq	= 100,	/* kHz */
+	.bus_delay	= 0,	/* usec */
+};
+
+static struct davinci_uart_config da850_evm_uart_config __initdata = {
+	.enabled_uarts = 0x7,
+};
+
+static __init void da850_evm_init(void)
+{
+	int ret;
+
+	ret = da8xx_register_edma();
+	if (ret)
+		pr_warning("da850_evm_init: edma registration failed: %d\n",
+				ret);
+
+	ret = da8xx_pinmux_setup(da850_i2c0_pins);
+	if (ret)
+		pr_warning("da850_evm_init: i2c0 mux setup failed: %d\n",
+				ret);
+
+	ret = da8xx_register_i2c(0, &da850_evm_i2c_0_pdata);
+	if (ret)
+		pr_warning("da850_evm_init: i2c0 registration failed: %d\n",
+				ret);
+
+	ret = da8xx_register_watchdog();
+	if (ret)
+		pr_warning("da830_evm_init: watchdog registration failed: %d\n",
+				ret);
+
+	davinci_serial_init(&da850_evm_uart_config);
+
+	/*
+	 * shut down uart 0 and 1; they are not used on the board and
+	 * accessing them causes endless "too much work in irq53" messages
+	 * with arago fs
+	 */
+	__raw_writel(0, IO_ADDRESS(DA8XX_UART1_BASE) + 0x30);
+	__raw_writel(0, IO_ADDRESS(DA8XX_UART0_BASE) + 0x30);
+}
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+static int __init da850_evm_console_init(void)
+{
+	return add_preferred_console("ttyS", 2, "115200");
+}
+console_initcall(da850_evm_console_init);
+#endif
+
+static __init void da850_evm_irq_init(void)
+{
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	cp_intc_init((void __iomem *)DA8XX_CP_INTC_VIRT, DA850_N_CP_INTC_IRQ,
+			soc_info->intc_irq_prios);
+}
+
+static void __init da850_evm_map_io(void)
+{
+	da850_init();
+}
+
+MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138 EVM")
+	.phys_io	= IO_PHYS,
+	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+	.boot_params	= (DA8XX_DDR_BASE + 0x100),
+	.map_io		= da850_evm_map_io,
+	.init_irq	= da850_evm_irq_init,
+	.timer		= &davinci_timer,
+	.init_machine	= da850_evm_init,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index 9d16277b233..17ab5236da6 100644
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -26,7 +26,8 @@
 		movne	\rx, #0xfe000000	@ virtual base
 #if defined(CONFIG_ARCH_DAVINCI_DA8XX) && defined(CONFIG_ARCH_DAVINCI_DMx)
 #error Cannot enable DaVinci and DA8XX platforms concurrently
-#elif defined(CONFIG_MACH_DAVINCI_DA830_EVM)
+#elif defined(CONFIG_MACH_DAVINCI_DA830_EVM) || \
+	defined(CONFIG_MACH_DAVINCI_DA850_EVM)
 		orr	\rx, \rx, #0x00d00000	@ physical base address
 		orr	\rx, \rx, #0x0000d000	@ of UART 2
 #else
diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h
index 46a0c3171e3..33796b4db17 100644
--- a/arch/arm/mach-davinci/include/mach/uncompress.h
+++ b/arch/arm/mach-davinci/include/mach/uncompress.h
@@ -21,7 +21,8 @@ static u32 *uart;
 
 static u32 *get_uart_base(void)
 {
-	if (__machine_arch_type == MACH_TYPE_DAVINCI_DA830_EVM)
+	if (__machine_arch_type == MACH_TYPE_DAVINCI_DA830_EVM ||
+		__machine_arch_type == MACH_TYPE_DAVINCI_DA850_EVM)
 		return (u32 *)DA8XX_UART2_BASE;
 	else
 		return (u32 *)DAVINCI_UART0_BASE;
-- 
cgit v1.2.3


From 5a4b131508236c0a59b8680f486c49e31881fe4e Mon Sep 17 00:00:00 2001
From: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Date: Fri, 17 Jul 2009 04:47:10 -0400
Subject: davinci: Add EMAC support for da850/omap-l138

Ethernet Media Access Controller (EMAC) on da850/omap-l138
supports 10/100 Mbps operation. It also supports Media
Independent Interface (MII) and Reduced Media Independent
Interface (RMII) to physical layer (PHY).

Phy which supports MII is present on the DA850/OMAP-L138
base board and Phy supporting RMII is present on the
UI card. This patch adds support only for the MII Phy.
Support for RMII Phy will be added later.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-da850-evm.c    | 18 +++++++++++++++++
 arch/arm/mach-davinci/da850.c              | 31 ++++++++++++++++++++++++++++++
 arch/arm/mach-davinci/include/mach/da8xx.h |  1 +
 arch/arm/mach-davinci/include/mach/mux.h   | 17 ++++++++++++++++
 4 files changed, 67 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index eaa1fc1bc5f..d9893462960 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -26,6 +26,9 @@
 #include <mach/cp_intc.h>
 #include <mach/da8xx.h>
 
+#define DA850_EVM_PHY_MASK		0x1
+#define DA850_EVM_MDIO_FREQUENCY	2200000 /* PHY bus frequency */
+
 static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
 	.bus_freq	= 100,	/* kHz */
 	.bus_delay	= 0,	/* usec */
@@ -37,6 +40,7 @@ static struct davinci_uart_config da850_evm_uart_config __initdata = {
 
 static __init void da850_evm_init(void)
 {
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
 	int ret;
 
 	ret = da8xx_register_edma();
@@ -54,6 +58,20 @@ static __init void da850_evm_init(void)
 		pr_warning("da850_evm_init: i2c0 registration failed: %d\n",
 				ret);
 
+	soc_info->emac_pdata->phy_mask = DA850_EVM_PHY_MASK;
+	soc_info->emac_pdata->mdio_max_freq = DA850_EVM_MDIO_FREQUENCY;
+	soc_info->emac_pdata->rmii_en = 0;
+
+	ret = da8xx_pinmux_setup(da850_cpgmac_pins);
+	if (ret)
+		pr_warning("da850_evm_init: cpgmac mux setup failed: %d\n",
+				ret);
+
+	ret = da8xx_register_emac();
+	if (ret)
+		pr_warning("da850_evm_init: emac registration failed: %d\n",
+				ret);
+
 	ret = da8xx_register_watchdog();
 	if (ret)
 		pr_warning("da830_evm_init: watchdog registration failed: %d\n",
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 332cf7fadb1..4a43ae2bec0 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -283,6 +283,12 @@ static struct clk rmii_clk = {
 	.parent		= &pll0_sysclk7,
 };
 
+static struct clk emac_clk = {
+	.name		= "emac",
+	.parent		= &pll0_sysclk4,
+	.lpsc		= DA8XX_LPSC1_CPGMAC,
+};
+
 static struct davinci_clk da850_clks[] = {
 	CLK(NULL,		"ref",		&ref_clk),
 	CLK(NULL,		"pll0",		&pll0_clk),
@@ -319,6 +325,7 @@ static struct davinci_clk da850_clks[] = {
 	CLK(NULL,		"emif3",	&emif3_clk),
 	CLK(NULL,		"arm",		&arm_clk),
 	CLK(NULL,		"rmii",		&rmii_clk),
+	CLK("davinci_emac.1",	NULL,		&emac_clk),
 	CLK(NULL,		NULL,		NULL),
 };
 
@@ -347,6 +354,22 @@ static const struct mux_config da850_pins[] = {
 	/* I2C0 function */
 	MUX_CFG(DA850, I2C0_SDA,	4,	12,	15,	2,	false)
 	MUX_CFG(DA850, I2C0_SCL,	4,	8,	15,	2,	false)
+	/* EMAC function */
+	MUX_CFG(DA850, MII_TXEN,	2,	4,	15,	8,	false)
+	MUX_CFG(DA850, MII_TXCLK,	2,	8,	15,	8,	false)
+	MUX_CFG(DA850, MII_COL,		2,	12,	15,	8,	false)
+	MUX_CFG(DA850, MII_TXD_3,	2,	16,	15,	8,	false)
+	MUX_CFG(DA850, MII_TXD_2,	2,	20,	15,	8,	false)
+	MUX_CFG(DA850, MII_TXD_1,	2,	24,	15,	8,	false)
+	MUX_CFG(DA850, MII_TXD_0,	2,	28,	15,	8,	false)
+	MUX_CFG(DA850, MII_RXCLK,	3,	0,	15,	8,	false)
+	MUX_CFG(DA850, MII_RXDV,	3,	4,	15,	8,	false)
+	MUX_CFG(DA850, MII_RXER,	3,	8,	15,	8,	false)
+	MUX_CFG(DA850, MII_CRS,		3,	12,	15,	8,	false)
+	MUX_CFG(DA850, MII_RXD_3,	3,	16,	15,	8,	false)
+	MUX_CFG(DA850, MII_RXD_2,	3,	20,	15,	8,	false)
+	MUX_CFG(DA850, MII_RXD_1,	3,	24,	15,	8,	false)
+	MUX_CFG(DA850, MII_RXD_0,	3,	28,	15,	8,	false)
 #endif
 };
 
@@ -375,6 +398,14 @@ const short da850_i2c1_pins[] __initdata = {
 	-1
 };
 
+const short da850_cpgmac_pins[] __initdata = {
+	DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
+	DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
+	DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3,
+	DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0,
+	-1
+};
+
 /* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
 static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = {
 	[IRQ_DA8XX_COMMTX]		= 7,
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 594f9882e42..a8cb5709848 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -99,6 +99,7 @@ extern const short da850_uart1_pins[];
 extern const short da850_uart2_pins[];
 extern const short da850_i2c0_pins[];
 extern const short da850_i2c1_pins[];
+extern const short da850_cpgmac_pins[];
 
 int da8xx_pinmux_setup(const short pins[]);
 
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index 3349fa5f82e..368fca69197 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -730,6 +730,23 @@ enum davinci_da850_index {
 	/* I2C0 function */
 	DA850_I2C0_SDA,
 	DA850_I2C0_SCL,
+
+	/* EMAC function */
+	DA850_MII_TXEN,
+	DA850_MII_TXCLK,
+	DA850_MII_COL,
+	DA850_MII_TXD_3,
+	DA850_MII_TXD_2,
+	DA850_MII_TXD_1,
+	DA850_MII_TXD_0,
+	DA850_MII_RXER,
+	DA850_MII_CRS,
+	DA850_MII_RXCLK,
+	DA850_MII_RXDV,
+	DA850_MII_RXD_3,
+	DA850_MII_RXD_2,
+	DA850_MII_RXD_1,
+	DA850_MII_RXD_0,
 };
 
 #ifdef CONFIG_DAVINCI_MUX
-- 
cgit v1.2.3


From 10a1af384e8157fa2e3275d68346cceff1ad06ca Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Fri, 17 Jul 2009 08:28:26 -0700
Subject: davinci: Kconfig: update default defconfig

Updated default defconfig after da850 merge and 2.6.31-rc3 update.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/configs/davinci_all_defconfig | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index 8c669ae94e3..5aec768ed10 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc2
-# Mon Jul  6 14:38:31 2009
+# Linux kernel version: 2.6.31-rc3-davinci1
+# Fri Jul 17 08:26:52 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -200,6 +200,7 @@ CONFIG_ARCH_DAVINCI_DM644x=y
 CONFIG_ARCH_DAVINCI_DM355=y
 CONFIG_ARCH_DAVINCI_DM646x=y
 # CONFIG_ARCH_DAVINCI_DA830 is not set
+# CONFIG_ARCH_DAVINCI_DA850 is not set
 CONFIG_ARCH_DAVINCI_DM365=y
 
 #
@@ -757,13 +758,14 @@ CONFIG_INPUT_EVBUG=m
 #
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-CONFIG_KEYBOARD_XTKBD=m
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_XTKBD=m
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -1262,8 +1264,8 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
 # CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_AMD5536UDC is not set
 # CONFIG_USB_GADGET_FSL_QE is not set
-- 
cgit v1.2.3


From 548197bdf02882db39b7563d26975e7549e6af03 Mon Sep 17 00:00:00 2001
From: Hemant Pedanekar <hemantp@ti.com>
Date: Fri, 17 Jul 2009 23:30:36 +0530
Subject: davinci: dm646x-evm: Add support for IDE

Controls ATA_RSTn and ATA_PWD through CPLD register 0 to enable ATA. An I2C
driver is added for the same. Calls ide init if enabled in configuration.

Signed-off-by: Hemant Pedanekar <hemantp@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-dm646x-evm.c | 59 ++++++++++++++++++++++++++++++++
 1 file changed, 59 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 0aa18df4110..fa91520532a 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -48,6 +48,17 @@
 #include <mach/mmc.h>
 #include <mach/emac.h>
 
+#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
+    defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
+#define HAS_ATA 1
+#else
+#define HAS_ATA 0
+#endif
+
+/* CPLD Register 0 bits to control ATA */
+#define DM646X_EVM_ATA_RST		BIT(0)
+#define DM646X_EVM_ATA_PWD		BIT(1)
+
 #define DM646X_EVM_PHY_MASK		(0x2)
 #define DM646X_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
 
@@ -55,6 +66,47 @@ static struct davinci_uart_config uart_config __initdata = {
 	.enabled_uarts = (1 << 0),
 };
 
+/* CPLD Register 0 Client: used for I/O Control */
+static int cpld_reg0_probe(struct i2c_client *client,
+			   const struct i2c_device_id *id)
+{
+	if (HAS_ATA) {
+		u8 data;
+		struct i2c_msg msg[2] = {
+			{
+				.addr = client->addr,
+				.flags = I2C_M_RD,
+				.len = 1,
+				.buf = &data,
+			},
+			{
+				.addr = client->addr,
+				.flags = 0,
+				.len = 1,
+				.buf = &data,
+			},
+		};
+
+		/* Clear ATA_RSTn and ATA_PWD bits to enable ATA operation. */
+		i2c_transfer(client->adapter, msg, 1);
+		data &= ~(DM646X_EVM_ATA_RST | DM646X_EVM_ATA_PWD);
+		i2c_transfer(client->adapter, msg + 1, 1);
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id cpld_reg_ids[] = {
+	{ "cpld_reg0", 0, },
+	{ },
+};
+
+static struct i2c_driver dm6467evm_cpld_driver = {
+	.driver.name	= "cpld_reg0",
+	.id_table	= cpld_reg_ids,
+	.probe		= cpld_reg0_probe,
+};
+
 /* LEDS */
 
 static struct gpio_led evm_leds[] = {
@@ -246,6 +298,9 @@ static struct i2c_board_info __initdata i2c_info[] =  {
 		I2C_BOARD_INFO("pcf8574a", 0x38),
 		.platform_data	= &pcf_data,
 	},
+	{
+		I2C_BOARD_INFO("cpld_reg0", 0x3a),
+	},
 };
 
 static struct davinci_i2c_platform_data i2c_pdata = {
@@ -256,6 +311,7 @@ static struct davinci_i2c_platform_data i2c_pdata = {
 static void __init evm_init_i2c(void)
 {
 	davinci_init_i2c(&i2c_pdata);
+	i2c_add_driver(&dm6467evm_cpld_driver);
 	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
 }
 
@@ -273,6 +329,9 @@ static __init void evm_init(void)
 	dm646x_init_mcasp0(&dm646x_evm_snd_data[0]);
 	dm646x_init_mcasp1(&dm646x_evm_snd_data[1]);
 
+	if (HAS_ATA)
+		dm646x_init_ide();
+
 	soc_info->emac_pdata->phy_mask = DM646X_EVM_PHY_MASK;
 	soc_info->emac_pdata->mdio_max_freq = DM646X_EVM_MDIO_FREQUENCY;
 }
-- 
cgit v1.2.3


From 61aa07328d8e70d95a1e2325288df52a1e92a694 Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Wed, 15 Jul 2009 08:47:48 -0700
Subject: davinci: audio clocks: use struct device instead of clock names

There is no need to pass clock name strings in platform_data.
Instead, setup clkdev nodes to have correct ASoC device names.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-dm355-evm.c  | 4 +---
 arch/arm/mach-davinci/board-dm644x-evm.c | 4 +---
 arch/arm/mach-davinci/board-dm646x-evm.c | 2 --
 arch/arm/mach-davinci/dm355.c            | 6 +++---
 arch/arm/mach-davinci/dm644x.c           | 2 +-
 arch/arm/mach-davinci/dm646x.c           | 4 ++--
 arch/arm/mach-davinci/include/mach/asp.h | 1 -
 7 files changed, 8 insertions(+), 15 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 4ef6dbeccf3..38157f78e1a 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -117,9 +117,7 @@ static struct davinci_i2c_platform_data i2c_pdata = {
 	.bus_delay	= 0	/* usec */,
 };
 
-static struct snd_platform_data dm355_evm_snd_data = {
-	.clk_name	= "asp1",
-};
+static struct snd_platform_data dm355_evm_snd_data;
 
 static int dm355evm_mmc_gpios = -EINVAL;
 
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index d37f5c204b6..6a27c5db328 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -225,9 +225,7 @@ static struct platform_device ide_dev = {
 	},
 };
 
-static struct snd_platform_data dm644x_evm_snd_data = {
-	.clk_name	= "asp0",
-};
+static struct snd_platform_data dm644x_evm_snd_data;
 
 /*----------------------------------------------------------------------*/
 
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index fa91520532a..cb30afe2205 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -268,7 +268,6 @@ static u8 dm646x_dit_serializer_direction[] = {
 
 static struct snd_platform_data dm646x_evm_snd_data[] = {
 	{
-		.clk_name       = "mcasp0",
 		.tx_dma_offset  = 0x400,
 		.rx_dma_offset  = 0x400,
 		.op_mode        = DAVINCI_MCASP_IIS_MODE,
@@ -278,7 +277,6 @@ static struct snd_platform_data dm646x_evm_snd_data[] = {
 		.eventq_no      = EVENTQ_0,
 	},
 	{
-		.clk_name       = "mcasp1",
 		.tx_dma_offset  = 0x400,
 		.rx_dma_offset  = 0,
 		.op_mode        = DAVINCI_MCASP_DIT_MODE,
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index b4d709a8612..3abeb3eb9b2 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -361,8 +361,8 @@ static struct davinci_clk dm355_clks[] = {
 	CLK(NULL, "uart1", &uart1_clk),
 	CLK(NULL, "uart2", &uart2_clk),
 	CLK("i2c_davinci.1", NULL, &i2c_clk),
-	CLK(NULL, "asp0", &asp0_clk),
-	CLK(NULL, "asp1", &asp1_clk),
+	CLK("davinci-asp.0", NULL, &asp0_clk),
+	CLK("davinci-asp.1", NULL, &asp1_clk),
 	CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
 	CLK("davinci_mmc.1", NULL, &mmcsd1_clk),
 	CLK(NULL, "spi0", &spi0_clk),
@@ -648,7 +648,7 @@ static struct resource dm355_asp1_resources[] = {
 
 static struct platform_device dm355_asp1_device = {
 	.name		= "davinci-asp",
-	.id		= -1,
+	.id		= 1,
 	.num_resources	= ARRAY_SIZE(dm355_asp1_resources),
 	.resource	= dm355_asp1_resources,
 };
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 55317b1cf86..e554aa6c9a8 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -304,7 +304,7 @@ struct davinci_clk dm644x_clks[] = {
 	CLK("davinci_emac.1", NULL, &emac_clk),
 	CLK("i2c_davinci.1", NULL, &i2c_clk),
 	CLK("palm_bk3710", NULL, &ide_clk),
-	CLK(NULL, "asp0", &asp_clk),
+	CLK("davinci-asp", NULL, &asp_clk),
 	CLK("davinci_mmc.0", NULL, &mmcsd_clk),
 	CLK(NULL, "spi", &spi_clk),
 	CLK(NULL, "gpio", &gpio_clk),
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 3516f7699db..8fa28039f27 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -334,8 +334,8 @@ struct davinci_clk dm646x_clks[] = {
 	CLK(NULL, "uart2", &uart2_clk),
 	CLK("i2c_davinci.1", NULL, &i2c_clk),
 	CLK(NULL, "gpio", &gpio_clk),
-	CLK(NULL, "mcasp0", &mcasp0_clk),
-	CLK(NULL, "mcasp1", &mcasp1_clk),
+	CLK("davinci-mcasp.0", NULL, &mcasp0_clk),
+	CLK("davinci-mcasp.1", NULL, &mcasp1_clk),
 	CLK(NULL, "aemif", &aemif_clk),
 	CLK("davinci_emac.1", NULL, &emac_clk),
 	CLK(NULL, "pwm0", &pwm0_clk),
diff --git a/arch/arm/mach-davinci/include/mach/asp.h b/arch/arm/mach-davinci/include/mach/asp.h
index 038ecb7c231..cdf1f444233 100644
--- a/arch/arm/mach-davinci/include/mach/asp.h
+++ b/arch/arm/mach-davinci/include/mach/asp.h
@@ -33,7 +33,6 @@
 #define DAVINCI_ASP1_TX_INT	IRQ_MBXINT
 
 struct snd_platform_data {
-	char *clk_name;
 	u32 tx_dma_offset;
 	u32 rx_dma_offset;
 	enum dma_event_q eventq_no;	/* event queue number */
-- 
cgit v1.2.3


From 889c1e0dabcebe3aab3fb5aec3f506d7d614ec61 Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Thu, 16 Jul 2009 06:59:42 -0700
Subject: davinci: Kconfig: add dm646x ASoC support

---
 arch/arm/configs/davinci_all_defconfig | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index 5aec768ed10..ddffe39d9f8 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -1088,9 +1088,16 @@ CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=m
-# CONFIG_SND_DAVINCI_SOC is not set
+CONFIG_SND_DAVINCI_SOC=m
+CONFIG_SND_DAVINCI_SOC_I2S=m
+CONFIG_SND_DAVINCI_SOC_MCASP=m
+CONFIG_SND_DAVINCI_SOC_EVM=m
+CONFIG_SND_DM6467_SOC_EVM=m
+# CONFIG_SND_DAVINCI_SOC_SFFSDR is not set
 CONFIG_SND_SOC_I2C_AND_SPI=m
 # CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_SPDIF=m
+CONFIG_SND_SOC_TLV320AIC3X=m
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
-- 
cgit v1.2.3


From 10eef5a8a08d8be455ae5f9599b214c33ad52340 Mon Sep 17 00:00:00 2001
From: Sandeep Paulraj <s-paulraj@ti.com>
Date: Mon, 27 Jul 2009 08:50:16 -0400
Subject: DaVinci: EDMA: Add queue 2 and 3 for DM365 and DM6467

DM365 and DM6467 have 4 queues. The patch updates the
'dma_event_q' enum to reflect this.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/include/mach/edma.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h
index a85cbedc9b0..5d489622646 100644
--- a/arch/arm/mach-davinci/include/mach/edma.h
+++ b/arch/arm/mach-davinci/include/mach/edma.h
@@ -210,6 +210,8 @@ enum fifo_width {
 enum dma_event_q {
 	EVENTQ_0 = 0,
 	EVENTQ_1 = 1,
+	EVENTQ_2 = 2,
+	EVENTQ_3 = 3,
 	EVENTQ_DEFAULT = -1
 };
 
-- 
cgit v1.2.3


From a0f0202e2a19d43d733e07cb435a3064324c2ba7 Mon Sep 17 00:00:00 2001
From: Sandeep Paulraj <s-paulraj@ti.com>
Date: Mon, 27 Jul 2009 09:57:07 -0400
Subject: DaVinci: EDMA: Updating default queue handling

EDMA queues in DM365 are a little different than those
on other DaVinci's. On DM365 Q0 and Q1 have the larger
FIFO size. We want Q0 and Q1 to be used by codecs and
DVSDK demos.
MMC driver is the only driver which uses the flag
'EVENTQ_DEFAULT'. So MMC driver should be using Q2 instead of
Q1 on DM365.
This patch allows us to declare a "default queue" from
SOC specific code. If it is not declared then the EDMA
driver assumes a default of queue 1.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/dm365.c             | 1 +
 arch/arm/mach-davinci/dma.c               | 7 ++++++-
 arch/arm/mach-davinci/include/mach/edma.h | 1 +
 3 files changed, 8 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index f02bce8eeba..aa3b0bbdda7 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -741,6 +741,7 @@ static struct edma_soc_info dm365_edma_info[] = {
 		.n_cc			= 1,
 		.queue_tc_mapping	= dm365_queue_tc_mapping,
 		.queue_priority_mapping	= dm365_queue_priority_mapping,
+		.default_queue		= EVENTQ_2,
 	},
 };
 
diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c
index 5908f7717b2..e6d7e6aca33 100644
--- a/arch/arm/mach-davinci/dma.c
+++ b/arch/arm/mach-davinci/dma.c
@@ -225,6 +225,7 @@ struct edma {
 	unsigned	num_slots;
 	unsigned	num_tc;
 	unsigned	num_cc;
+	enum dma_event_q 	default_queue;
 
 	/* list of channels with no even trigger; terminated by "-1" */
 	const s8	*noevent;
@@ -267,7 +268,7 @@ static void map_dmach_queue(unsigned ctlr, unsigned ch_no,
 
 	/* default to low priority queue */
 	if (queue_no == EVENTQ_DEFAULT)
-		queue_no = EVENTQ_1;
+		queue_no = edma_info[ctlr]->default_queue;
 
 	queue_no &= 7;
 	edma_modify_array(ctlr, EDMA_DMAQNUM, (ch_no >> 3),
@@ -1249,6 +1250,10 @@ static int __init edma_probe(struct platform_device *pdev)
 		edma_info[j]->num_cc = min_t(unsigned, info[j].n_cc,
 							EDMA_MAX_CC);
 
+		edma_info[j]->default_queue = info[j].default_queue;
+		if (!edma_info[j]->default_queue)
+			edma_info[j]->default_queue = EVENTQ_1;
+
 		dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n",
 			edmacc_regs_base[j]);
 
diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h
index 5d489622646..3c7dc2db70e 100644
--- a/arch/arm/mach-davinci/include/mach/edma.h
+++ b/arch/arm/mach-davinci/include/mach/edma.h
@@ -271,6 +271,7 @@ struct edma_soc_info {
 	unsigned	n_slot;
 	unsigned	n_tc;
 	unsigned	n_cc;
+	enum dma_event_q	default_queue;
 
 	/* list of channels with no even trigger; terminated by "-1" */
 	const s8	*noevent;
-- 
cgit v1.2.3


From 866d286953c359e7b1fc0b8d04254d144a11be68 Mon Sep 17 00:00:00 2001
From: Sandeep Paulraj <s-paulraj@ti.com>
Date: Mon, 3 Aug 2009 13:58:24 -0400
Subject: DaVinci: DM365: Fix Compilation issue due to PINMUX entry

The mask can hold only 8 bit values. This gave a
compilation warning. This patch rectifies the warning.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/dm365.c            | 3 ++-
 arch/arm/mach-davinci/include/mach/mux.h | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index aa3b0bbdda7..0a33e128f3f 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -582,7 +582,8 @@ MUX_CFG(DM365,	VOUT_COUTH_EN,	1,   8,     0xff, 0x55,  false)
 MUX_CFG(DM365,	VIN_CAM_WEN,	0,   14,    3,	  0,	 false)
 MUX_CFG(DM365,	VIN_CAM_VD,	0,   13,    1,	  0,	 false)
 MUX_CFG(DM365,	VIN_CAM_HD,	0,   12,    1,	  0,	 false)
-MUX_CFG(DM365,	VIN_YIN_EN,	0,   0,     0xfff, 0,	 false)
+MUX_CFG(DM365,	VIN_YIN4_7_EN,	0,   0,     0xff, 0,	 false)
+MUX_CFG(DM365,	VIN_YIN0_3_EN,	0,   8,     0xf,  0,	 false)
 
 INT_CFG(DM365,  INT_EDMA_CC,         2,     1,    1,     false)
 INT_CFG(DM365,  INT_EDMA_TC0_ERR,    3,     1,    1,     false)
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index 368fca69197..a676b2f47aa 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -280,7 +280,8 @@ enum davinci_dm365_index {
 	DM365_VIN_CAM_WEN,
 	DM365_VIN_CAM_VD,
 	DM365_VIN_CAM_HD,
-	DM365_VIN_YIN_EN,
+	DM365_VIN_YIN4_7_EN,
+	DM365_VIN_YIN0_3_EN,
 
 	/* IRQ muxing */
 	DM365_INT_EDMA_CC,
-- 
cgit v1.2.3


From cc36e97b0b33d9041928e4db45654223a59c1a75 Mon Sep 17 00:00:00 2001
From: Sandeep Paulraj <s-paulraj@ti.com>
Date: Fri, 7 Aug 2009 13:19:45 -0400
Subject: DaVinci: DM365: Add Support for new Revision of silicon

DM365 RBL has been updated. The variant number has changed for this
new revision of silicon. This patch adds support for the
new revision of DM365.
The name fields are also being updated to reflect the version
of the silicon.

Without this minor fix DM365 REV 1.2 will not boot up

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/dm365.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 0a33e128f3f..f8bac9486b0 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -821,7 +821,14 @@ static struct davinci_id dm365_ids[] = {
 		.part_no	= 0xb83e,
 		.manufacturer	= 0x017,
 		.cpu_id		= DAVINCI_CPU_ID_DM365,
-		.name		= "dm365",
+		.name		= "dm365_rev1.1",
+	},
+	{
+		.variant	= 0x8,
+		.part_no	= 0xb83e,
+		.manufacturer	= 0x017,
+		.cpu_id		= DAVINCI_CPU_ID_DM365,
+		.name		= "dm365_rev1.2",
 	},
 };
 
-- 
cgit v1.2.3


From 53ca5c916971f72262ef37287e17f0a7d980362c Mon Sep 17 00:00:00 2001
From: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Date: Tue, 11 Aug 2009 11:10:50 -0400
Subject: davinci: Configure MDIO pins for EMAC

Earlier patch which adds EMAC support for da850/omap-l138
was not configuring the MDIO pins.

Ethernet was working fine with the earlier patch, because
the MDIO pins were configured from the boot loader. This
patch removes that dependency.

Also, this patch populates a member in the emac clk structure
to say that EMAC LPSC sits on controller 1.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/da850.c            | 6 +++++-
 arch/arm/mach-davinci/include/mach/mux.h | 2 ++
 2 files changed, 7 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 4a43ae2bec0..22205a3727a 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -287,6 +287,7 @@ static struct clk emac_clk = {
 	.name		= "emac",
 	.parent		= &pll0_sysclk4,
 	.lpsc		= DA8XX_LPSC1_CPGMAC,
+	.psc_ctlr	= 1,
 };
 
 static struct davinci_clk da850_clks[] = {
@@ -370,6 +371,8 @@ static const struct mux_config da850_pins[] = {
 	MUX_CFG(DA850, MII_RXD_2,	3,	20,	15,	8,	false)
 	MUX_CFG(DA850, MII_RXD_1,	3,	24,	15,	8,	false)
 	MUX_CFG(DA850, MII_RXD_0,	3,	28,	15,	8,	false)
+	MUX_CFG(DA850, MDIO_CLK,	4,	0,	15,	8,	false)
+	MUX_CFG(DA850, MDIO_D,		4,	4,	15,	8,	false)
 #endif
 };
 
@@ -402,7 +405,8 @@ const short da850_cpgmac_pins[] __initdata = {
 	DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
 	DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
 	DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3,
-	DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0,
+	DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK,
+	DA850_MDIO_D,
 	-1
 };
 
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index a676b2f47aa..8676680fc5b 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -748,6 +748,8 @@ enum davinci_da850_index {
 	DA850_MII_RXD_2,
 	DA850_MII_RXD_1,
 	DA850_MII_RXD_0,
+	DA850_MDIO_CLK,
+	DA850_MDIO_D,
 };
 
 #ifdef CONFIG_DAVINCI_MUX
-- 
cgit v1.2.3


From 5a8d5441f4aac3ef0478d5de723422304c611926 Mon Sep 17 00:00:00 2001
From: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Date: Tue, 11 Aug 2009 16:14:21 -0400
Subject: davinci: Correct the number of GPIO pins for da850/omap-l138

DA850/OMAP-L138 has 144 pins configurable as GPIO, but
currently this has been configured as 128. This patch
corrects it.

Also, this patch adds the base address for GPIO pins
greater than 128.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/da850.c             | 2 +-
 arch/arm/mach-davinci/include/mach/gpio.h | 2 ++
 arch/arm/mach-davinci/include/mach/irqs.h | 4 ++--
 3 files changed, 5 insertions(+), 3 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 22205a3727a..c5efc515df4 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -623,7 +623,7 @@ static struct davinci_soc_info davinci_soc_info_da850 = {
 	.intc_irq_num		= DA850_N_CP_INTC_IRQ,
 	.timer_info		= &da850_timer_info,
 	.gpio_base		= IO_ADDRESS(DA8XX_GPIO_BASE),
-	.gpio_num		= 128,
+	.gpio_num		= 144,
 	.gpio_irq		= IRQ_DA8XX_GPIO0,
 	.serial_dev		= &da8xx_serial_device,
 	.emac_pdata		= &da8xx_emac_pdata,
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
index ebcc29babea..4f032b38cd6 100644
--- a/arch/arm/mach-davinci/include/mach/gpio.h
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -78,6 +78,8 @@ __gpio_to_controller(unsigned gpio)
 		ptr = base + 0x60;
 	else if (gpio < 32 * 4)
 		ptr = base + 0x88;
+	else if (gpio < 32 * 5)
+		ptr = base + 0xb0;
 	else
 		ptr = NULL;
 	return ptr;
diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h
index 6047c2d9da3..7f755cc387e 100644
--- a/arch/arm/mach-davinci/include/mach/irqs.h
+++ b/arch/arm/mach-davinci/include/mach/irqs.h
@@ -397,8 +397,8 @@
 
 #define DA850_N_CP_INTC_IRQ		101
 
-/* da830/da850 currently has the most gpio pins (128) */
-#define DAVINCI_N_GPIO			128
+/* da850 currently has the most gpio pins (144) */
+#define DAVINCI_N_GPIO			144
 /* da850 currently has the most irqs so use DA850_N_CP_INTC_IRQ */
 #define NR_IRQS				(DA850_N_CP_INTC_IRQ + DAVINCI_N_GPIO)
 
-- 
cgit v1.2.3


From e33ef5e3b368b31705d3024ee6a326f2a85a78fb Mon Sep 17 00:00:00 2001
From: Chaithrika U S <chaithrika@ti.com>
Date: Tue, 11 Aug 2009 17:01:59 -0400
Subject: davinci: Audio support for DA830 EVM

Define resources for McASP1 used on DA830/OMAP-L137 EVM, add platform
device defintion, initialization function.  Additionally, this patch
also adds version and FIFO related members to platform data structure.

Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-da830-evm.c    | 27 ++++++++++++++++++++++
 arch/arm/mach-davinci/da830.c              |  7 +++---
 arch/arm/mach-davinci/devices-da8xx.c      | 36 ++++++++++++++++++++++++++++++
 arch/arm/mach-davinci/include/mach/asp.h   | 15 +++++++++++++
 arch/arm/mach-davinci/include/mach/da8xx.h |  3 +++
 5 files changed, 85 insertions(+), 3 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 90256693b8d..a45340de746 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -23,6 +23,7 @@
 #include <mach/irqs.h>
 #include <mach/cp_intc.h>
 #include <mach/da8xx.h>
+#include <mach/asp.h>
 
 #define DA830_EVM_PHY_MASK		0x0
 #define DA830_EVM_MDIO_FREQUENCY	2200000	/* PHY bus frequency */
@@ -51,6 +52,25 @@ static struct davinci_uart_config da830_evm_uart_config __initdata = {
 	.enabled_uarts = 0x7,
 };
 
+static u8 da830_iis_serializer_direction[] = {
+	RX_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
+	INACTIVE_MODE,	TX_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
+	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
+};
+
+static struct snd_platform_data da830_evm_snd_data = {
+	.tx_dma_offset  = 0x2000,
+	.rx_dma_offset  = 0x2000,
+	.op_mode        = DAVINCI_MCASP_IIS_MODE,
+	.num_serializer = ARRAY_SIZE(da830_iis_serializer_direction),
+	.tdm_slots      = 2,
+	.serial_dir     = da830_iis_serializer_direction,
+	.eventq_no      = EVENTQ_0,
+	.version	= MCASP_VERSION_2,
+	.txnumevt	= 1,
+	.rxnumevt	= 1,
+};
+
 static __init void da830_evm_init(void)
 {
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
@@ -93,6 +113,13 @@ static __init void da830_evm_init(void)
 	davinci_serial_init(&da830_evm_uart_config);
 	i2c_register_board_info(1, da830_evm_i2c_devices,
 			ARRAY_SIZE(da830_evm_i2c_devices));
+
+	ret = da8xx_pinmux_setup(da830_mcasp1_pins);
+	if (ret)
+		pr_warning("da830_evm_init: mcasp1 mux setup failed: %d\n",
+				ret);
+
+	da8xx_init_mcasp(1, &da830_evm_snd_data);
 }
 
 #ifdef CONFIG_SERIAL_8250_CONSOLE
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index 3a9b6346c31..19b2748357f 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -23,6 +23,7 @@
 #include <mach/common.h>
 #include <mach/time.h>
 #include <mach/da8xx.h>
+#include <mach/asp.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -411,9 +412,9 @@ static struct davinci_clk da830_clks[] = {
 	CLK("eqep.0",		NULL,		&eqep0_clk),
 	CLK("eqep.1",		NULL,		&eqep1_clk),
 	CLK("da830_lcdc",	NULL,		&lcdc_clk),
-	CLK("soc-audio.0",	NULL,		&mcasp0_clk),
-	CLK("soc-audio.1",	NULL,		&mcasp1_clk),
-	CLK("soc-audio.2",	NULL,		&mcasp2_clk),
+	CLK("davinci-mcasp.0",	NULL,		&mcasp0_clk),
+	CLK("davinci-mcasp.1",	NULL,		&mcasp1_clk),
+	CLK("davinci-mcasp.2",	NULL,		&mcasp2_clk),
 	CLK("musb_hdrc",	NULL,		&usb20_clk),
 	CLK(NULL,		"aemif",	&aemif_clk),
 	CLK(NULL,		"aintc",	&aintc_clk),
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 11c0971e13a..fe0baafcf61 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -281,7 +281,43 @@ static struct platform_device da8xx_emac_device = {
 	.resource	= da8xx_emac_resources,
 };
 
+static struct resource da830_mcasp1_resources[] = {
+	{
+		.name	= "mcasp1",
+		.start	= DAVINCI_DA830_MCASP1_REG_BASE,
+		.end	= DAVINCI_DA830_MCASP1_REG_BASE + (SZ_1K * 12) - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	/* TX event */
+	{
+		.start	= DAVINCI_DA830_DMA_MCASP1_AXEVT,
+		.end	= DAVINCI_DA830_DMA_MCASP1_AXEVT,
+		.flags	= IORESOURCE_DMA,
+	},
+	/* RX event */
+	{
+		.start	= DAVINCI_DA830_DMA_MCASP1_AREVT,
+		.end	= DAVINCI_DA830_DMA_MCASP1_AREVT,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device da830_mcasp1_device = {
+	.name		= "davinci-mcasp",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(da830_mcasp1_resources),
+	.resource	= da830_mcasp1_resources,
+};
+
 int __init da8xx_register_emac(void)
 {
 	return platform_device_register(&da8xx_emac_device);
 }
+
+void __init da8xx_init_mcasp(int id, struct snd_platform_data *pdata)
+{
+	if (id == 1) { /* DA830/OMAP-L137 has 3 instances of McASP */
+		da830_mcasp1_device.dev.platform_data = pdata;
+		platform_device_register(&da830_mcasp1_device);
+	}
+}
diff --git a/arch/arm/mach-davinci/include/mach/asp.h b/arch/arm/mach-davinci/include/mach/asp.h
index cdf1f444233..f3c97ac3425 100644
--- a/arch/arm/mach-davinci/include/mach/asp.h
+++ b/arch/arm/mach-davinci/include/mach/asp.h
@@ -15,6 +15,9 @@
 #define	DAVINCI_DM646X_MCASP0_REG_BASE		0x01D01000
 #define DAVINCI_DM646X_MCASP1_REG_BASE		0x01D01800
 
+/* Bases of da830 McASP1 register banks */
+#define DAVINCI_DA830_MCASP1_REG_BASE	0x01D04000
+
 /* EDMA channels of dm644x and dm355 */
 #define DAVINCI_DMA_ASP0_TX	2
 #define DAVINCI_DMA_ASP0_RX	3
@@ -26,6 +29,10 @@
 #define	DAVINCI_DM646X_DMA_MCASP0_AREVT0	9
 #define	DAVINCI_DM646X_DMA_MCASP1_AXEVT1	12
 
+/* EDMA channels of da830 McASP1 */
+#define	DAVINCI_DA830_DMA_MCASP1_AREVT	2
+#define	DAVINCI_DA830_DMA_MCASP1_AXEVT	3
+
 /* Interrupts */
 #define DAVINCI_ASP0_RX_INT	IRQ_MBRINT
 #define DAVINCI_ASP0_TX_INT	IRQ_MBXINT
@@ -43,6 +50,14 @@ struct snd_platform_data {
 	u8 op_mode;
 	u8 num_serializer;
 	u8 *serial_dir;
+	u8 version;
+	u8 txnumevt;
+	u8 rxnumevt;
+};
+
+enum {
+	MCASP_VERSION_1 = 0,	/* DM646x */
+	MCASP_VERSION_2,	/* DA8xx/OMAPL1x */
 };
 
 #define INACTIVE_MODE	0
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index a8cb5709848..30c5c407ea8 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -15,6 +15,7 @@
 #include <mach/edma.h>
 #include <mach/i2c.h>
 #include <mach/emac.h>
+#include <mach/asp.h>
 
 /*
  * The cp_intc interrupt controller for the da8xx isn't in the same
@@ -65,6 +66,7 @@ int da8xx_register_edma(void);
 int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata);
 int da8xx_register_watchdog(void);
 int da8xx_register_emac(void);
+void __init da8xx_init_mcasp(int id, struct snd_platform_data *pdata);
 
 extern struct platform_device da8xx_serial_device;
 extern struct emac_platform_data da8xx_emac_pdata;
@@ -100,6 +102,7 @@ extern const short da850_uart2_pins[];
 extern const short da850_i2c0_pins[];
 extern const short da850_i2c1_pins[];
 extern const short da850_cpgmac_pins[];
+extern const short da850_mcasp_pins[];
 
 int da8xx_pinmux_setup(const short pins[]);
 
-- 
cgit v1.2.3


From 491214e1f8129844289869bb6c231dc4542b11e3 Mon Sep 17 00:00:00 2001
From: Chaithrika U S <chaithrika@ti.com>
Date: Tue, 11 Aug 2009 17:03:25 -0400
Subject: davinci: Audio support for DA850/OMAP-L138 EVM

Define resources for McASP used on DA850/OMAP-L138 EVM, add platform
device defintion and Pin Mux configurations.

Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-da850-evm.c  | 29 ++++++++++++++++++++++++
 arch/arm/mach-davinci/da850.c            | 39 ++++++++++++++++++++++++++++++++
 arch/arm/mach-davinci/devices-da8xx.c    | 34 +++++++++++++++++++++++++++-
 arch/arm/mach-davinci/include/mach/asp.h |  7 ++++++
 arch/arm/mach-davinci/include/mach/mux.h | 25 ++++++++++++++++++++
 5 files changed, 133 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index d9893462960..52bfe4cba25 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -38,6 +38,28 @@ static struct davinci_uart_config da850_evm_uart_config __initdata = {
 	.enabled_uarts = 0x7,
 };
 
+/* davinci da850 evm audio machine driver */
+static u8 da850_iis_serializer_direction[] = {
+	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
+	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
+	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	TX_MODE,
+	RX_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
+};
+
+static struct snd_platform_data da850_evm_snd_data = {
+	.tx_dma_offset	= 0x2000,
+	.rx_dma_offset	= 0x2000,
+	.op_mode	= DAVINCI_MCASP_IIS_MODE,
+	.num_serializer	= ARRAY_SIZE(da850_iis_serializer_direction),
+	.tdm_slots	= 2,
+	.serial_dir	= da850_iis_serializer_direction,
+	.eventq_no	= EVENTQ_1,
+	.version	= MCASP_VERSION_2,
+	.txnumevt	= 1,
+	.rxnumevt	= 1,
+};
+
+
 static __init void da850_evm_init(void)
 {
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
@@ -86,6 +108,13 @@ static __init void da850_evm_init(void)
 	 */
 	__raw_writel(0, IO_ADDRESS(DA8XX_UART1_BASE) + 0x30);
 	__raw_writel(0, IO_ADDRESS(DA8XX_UART0_BASE) + 0x30);
+
+	ret = da8xx_pinmux_setup(da850_mcasp_pins);
+	if (ret)
+		pr_warning("da850_evm_init: mcasp mux setup failed: %d\n",
+				ret);
+
+	da8xx_init_mcasp(0, &da850_evm_snd_data);
 }
 
 #ifdef CONFIG_SERIAL_8250_CONSOLE
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index c5efc515df4..e440c09c557 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -290,6 +290,13 @@ static struct clk emac_clk = {
 	.psc_ctlr	= 1,
 };
 
+static struct clk mcasp_clk = {
+	.name		= "mcasp",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_McASP0,
+	.psc_ctlr	= 1,
+};
+
 static struct davinci_clk da850_clks[] = {
 	CLK(NULL,		"ref",		&ref_clk),
 	CLK(NULL,		"pll0",		&pll0_clk),
@@ -327,6 +334,7 @@ static struct davinci_clk da850_clks[] = {
 	CLK(NULL,		"arm",		&arm_clk),
 	CLK(NULL,		"rmii",		&rmii_clk),
 	CLK("davinci_emac.1",	NULL,		&emac_clk),
+	CLK("davinci-mcasp.0",	NULL,		&mcasp_clk),
 	CLK(NULL,		NULL,		NULL),
 };
 
@@ -373,6 +381,30 @@ static const struct mux_config da850_pins[] = {
 	MUX_CFG(DA850, MII_RXD_0,	3,	28,	15,	8,	false)
 	MUX_CFG(DA850, MDIO_CLK,	4,	0,	15,	8,	false)
 	MUX_CFG(DA850, MDIO_D,		4,	4,	15,	8,	false)
+	/* McASP function */
+	MUX_CFG(DA850,	ACLKR,		0,	0,	15,	1,	false)
+	MUX_CFG(DA850,	ACLKX,		0,	4,	15,	1,	false)
+	MUX_CFG(DA850,	AFSR,		0,	8,	15,	1,	false)
+	MUX_CFG(DA850,	AFSX,		0,	12,	15,	1,	false)
+	MUX_CFG(DA850,	AHCLKR,		0,	16,	15,	1,	false)
+	MUX_CFG(DA850,	AHCLKX,		0,	20,	15,	1,	false)
+	MUX_CFG(DA850,	AMUTE,		0,	24,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_15,		1,	0,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_14,		1,	4,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_13,		1,	8,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_12,		1,	12,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_11,		1,	16,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_10,		1,	20,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_9,		1,	24,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_8,		1,	28,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_7,		2,	0,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_6,		2,	4,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_5,		2,	8,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_4,		2,	12,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_3,		2,	16,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_2,		2,	20,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_1,		2,	24,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_0,		2,	28,	15,	1,	false)
 #endif
 };
 
@@ -410,6 +442,13 @@ const short da850_cpgmac_pins[] __initdata = {
 	-1
 };
 
+const short da850_mcasp_pins[] __initdata = {
+	DA850_AHCLKX, DA850_ACLKX, DA850_AFSX,
+	DA850_AHCLKR, DA850_ACLKR, DA850_AFSR, DA850_AMUTE,
+	DA850_AXR_11, DA850_AXR_12,
+	-1
+};
+
 /* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
 static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = {
 	[IRQ_DA8XX_COMMTX]		= 7,
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index fe0baafcf61..1882eef3aea 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -309,6 +309,34 @@ static struct platform_device da830_mcasp1_device = {
 	.resource	= da830_mcasp1_resources,
 };
 
+static struct resource da850_mcasp_resources[] = {
+	{
+		.name	= "mcasp",
+		.start	= DAVINCI_DA8XX_MCASP0_REG_BASE,
+		.end	= DAVINCI_DA8XX_MCASP0_REG_BASE + (SZ_1K * 12) - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	/* TX event */
+	{
+		.start	= DAVINCI_DA8XX_DMA_MCASP0_AXEVT,
+		.end	= DAVINCI_DA8XX_DMA_MCASP0_AXEVT,
+		.flags	= IORESOURCE_DMA,
+	},
+	/* RX event */
+	{
+		.start	= DAVINCI_DA8XX_DMA_MCASP0_AREVT,
+		.end	= DAVINCI_DA8XX_DMA_MCASP0_AREVT,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device da850_mcasp_device = {
+	.name		= "davinci-mcasp",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(da850_mcasp_resources),
+	.resource	= da850_mcasp_resources,
+};
+
 int __init da8xx_register_emac(void)
 {
 	return platform_device_register(&da8xx_emac_device);
@@ -316,8 +344,12 @@ int __init da8xx_register_emac(void)
 
 void __init da8xx_init_mcasp(int id, struct snd_platform_data *pdata)
 {
-	if (id == 1) { /* DA830/OMAP-L137 has 3 instances of McASP */
+	/* DA830/OMAP-L137 has 3 instances of McASP */
+	if (cpu_is_davinci_da830() && id == 1) {
 		da830_mcasp1_device.dev.platform_data = pdata;
 		platform_device_register(&da830_mcasp1_device);
+	} else if (cpu_is_davinci_da850()) {
+		da850_mcasp_device.dev.platform_data = pdata;
+		platform_device_register(&da850_mcasp_device);
 	}
 }
diff --git a/arch/arm/mach-davinci/include/mach/asp.h b/arch/arm/mach-davinci/include/mach/asp.h
index f3c97ac3425..18e4ce34ece 100644
--- a/arch/arm/mach-davinci/include/mach/asp.h
+++ b/arch/arm/mach-davinci/include/mach/asp.h
@@ -15,6 +15,9 @@
 #define	DAVINCI_DM646X_MCASP0_REG_BASE		0x01D01000
 #define DAVINCI_DM646X_MCASP1_REG_BASE		0x01D01800
 
+/* Bases of da850/da830 McASP0  register banks */
+#define DAVINCI_DA8XX_MCASP0_REG_BASE	0x01D00000
+
 /* Bases of da830 McASP1 register banks */
 #define DAVINCI_DA830_MCASP1_REG_BASE	0x01D04000
 
@@ -29,6 +32,10 @@
 #define	DAVINCI_DM646X_DMA_MCASP0_AREVT0	9
 #define	DAVINCI_DM646X_DMA_MCASP1_AXEVT1	12
 
+/* EDMA channels of da850/da830 McASP0 */
+#define	DAVINCI_DA8XX_DMA_MCASP0_AREVT	0
+#define	DAVINCI_DA8XX_DMA_MCASP0_AXEVT	1
+
 /* EDMA channels of da830 McASP1 */
 #define	DAVINCI_DA830_DMA_MCASP1_AREVT	2
 #define	DAVINCI_DA830_DMA_MCASP1_AXEVT	3
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index 8676680fc5b..82d75146185 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -750,6 +750,31 @@ enum davinci_da850_index {
 	DA850_MII_RXD_0,
 	DA850_MDIO_CLK,
 	DA850_MDIO_D,
+
+	/* McASP function */
+	DA850_ACLKR,
+	DA850_ACLKX,
+	DA850_AFSR,
+	DA850_AFSX,
+	DA850_AHCLKR,
+	DA850_AHCLKX,
+	DA850_AMUTE,
+	DA850_AXR_15,
+	DA850_AXR_14,
+	DA850_AXR_13,
+	DA850_AXR_12,
+	DA850_AXR_11,
+	DA850_AXR_10,
+	DA850_AXR_9,
+	DA850_AXR_8,
+	DA850_AXR_7,
+	DA850_AXR_6,
+	DA850_AXR_5,
+	DA850_AXR_4,
+	DA850_AXR_3,
+	DA850_AXR_2,
+	DA850_AXR_1,
+	DA850_AXR_0,
 };
 
 #ifdef CONFIG_DAVINCI_MUX
-- 
cgit v1.2.3


From b1466376b22e1ec6395ccda7580deb72d3a809ad Mon Sep 17 00:00:00 2001
From: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Date: Thu, 13 Aug 2009 12:11:56 -0400
Subject: davinci: Macro to convert GPIO signal to GPIO pin number

Adds a macro to convert the GPIO signal passed as bank number
and signal to GPIO pin number.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/include/mach/gpio.h | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
index 4f032b38cd6..f3b8ef87815 100644
--- a/arch/arm/mach-davinci/include/mach/gpio.h
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -42,6 +42,9 @@
  */
 #define	GPIO(X)		(X)		/* 0 <= X <= (DAVINCI_N_GPIO - 1) */
 
+/* Convert GPIO signal to GPIO pin number */
+#define GPIO_TO_PIN(bank, gpio)	(16 * (bank) + (gpio))
+
 struct gpio_controller {
 	u32	dir;
 	u32	out_data;
-- 
cgit v1.2.3


From 5cbdf276bd9d9cd3cb9616f8253390096c1a237f Mon Sep 17 00:00:00 2001
From: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Date: Thu, 13 Aug 2009 14:33:14 -0400
Subject: davinci: Add platform support for da850/omap-l138 GLCD

This patch adds platform support for the graphic display
(Sharp LK043T1DG01) found on DA850/OMAP-L138 based EVM.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-da850-evm.c    | 50 +++++++++++++++++++++++++
 arch/arm/mach-davinci/da850.c              | 42 +++++++++++++++++++++
 arch/arm/mach-davinci/devices-da8xx.c      | 59 ++++++++++++++++++++++++++++++
 arch/arm/mach-davinci/include/mach/da8xx.h |  3 ++
 arch/arm/mach-davinci/include/mach/mux.h   | 26 +++++++++++++
 5 files changed, 180 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 52bfe4cba25..b1df784ed70 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -17,6 +17,7 @@
 #include <linux/console.h>
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
+#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -29,6 +30,9 @@
 #define DA850_EVM_PHY_MASK		0x1
 #define DA850_EVM_MDIO_FREQUENCY	2200000 /* PHY bus frequency */
 
+#define DA850_LCD_BL_PIN		GPIO_TO_PIN(2, 15)
+#define DA850_LCD_PWR_PIN		GPIO_TO_PIN(8, 10)
+
 static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
 	.bus_freq	= 100,	/* kHz */
 	.bus_delay	= 0,	/* usec */
@@ -59,6 +63,37 @@ static struct snd_platform_data da850_evm_snd_data = {
 	.rxnumevt	= 1,
 };
 
+static int da850_lcd_hw_init(void)
+{
+	int status;
+
+	status = gpio_request(DA850_LCD_BL_PIN, "lcd bl\n");
+	if (status < 0)
+		return status;
+
+	status = gpio_request(DA850_LCD_PWR_PIN, "lcd pwr\n");
+	if (status < 0) {
+		gpio_free(DA850_LCD_BL_PIN);
+		return status;
+	}
+
+	gpio_direction_output(DA850_LCD_BL_PIN, 0);
+	gpio_direction_output(DA850_LCD_PWR_PIN, 0);
+
+	/* disable lcd backlight */
+	gpio_set_value(DA850_LCD_BL_PIN, 0);
+
+	/* disable lcd power */
+	gpio_set_value(DA850_LCD_PWR_PIN, 0);
+
+	/* enable lcd power */
+	gpio_set_value(DA850_LCD_PWR_PIN, 1);
+
+	/* enable lcd backlight */
+	gpio_set_value(DA850_LCD_BL_PIN, 1);
+
+	return 0;
+}
 
 static __init void da850_evm_init(void)
 {
@@ -115,6 +150,21 @@ static __init void da850_evm_init(void)
 				ret);
 
 	da8xx_init_mcasp(0, &da850_evm_snd_data);
+
+	ret = da8xx_pinmux_setup(da850_lcdcntl_pins);
+	if (ret)
+		pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n",
+				ret);
+
+	ret = da850_lcd_hw_init();
+	if (ret)
+		pr_warning("da850_evm_init: lcd initialization failed: %d\n",
+				ret);
+
+	ret = da8xx_register_lcdc();
+	if (ret)
+		pr_warning("da850_evm_init: lcdc registration failed: %d\n",
+				ret);
 }
 
 #ifdef CONFIG_SERIAL_8250_CONSOLE
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index e440c09c557..e6e605bf151 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -297,6 +297,13 @@ static struct clk mcasp_clk = {
 	.psc_ctlr	= 1,
 };
 
+static struct clk lcdc_clk = {
+	.name		= "lcdc",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_LCDC,
+	.psc_ctlr	= 1,
+};
+
 static struct davinci_clk da850_clks[] = {
 	CLK(NULL,		"ref",		&ref_clk),
 	CLK(NULL,		"pll0",		&pll0_clk),
@@ -335,6 +342,7 @@ static struct davinci_clk da850_clks[] = {
 	CLK(NULL,		"rmii",		&rmii_clk),
 	CLK("davinci_emac.1",	NULL,		&emac_clk),
 	CLK("davinci-mcasp.0",	NULL,		&mcasp_clk),
+	CLK("da8xx_lcdc.0",	NULL,		&lcdc_clk),
 	CLK(NULL,		NULL,		NULL),
 };
 
@@ -405,6 +413,30 @@ static const struct mux_config da850_pins[] = {
 	MUX_CFG(DA850,	AXR_2,		2,	20,	15,	1,	false)
 	MUX_CFG(DA850,	AXR_1,		2,	24,	15,	1,	false)
 	MUX_CFG(DA850,	AXR_0,		2,	28,	15,	1,	false)
+	/* LCD function */
+	MUX_CFG(DA850, LCD_D_7,		16,	8,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_6,		16,	12,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_5,		16,	16,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_4,		16,	20,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_3,		16,	24,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_2,		16,	28,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_1,		17,	0,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_0,		17,	4,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_15,	17,	8,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_14,	17,	12,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_13,	17,	16,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_12,	17,	20,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_11,	17,	24,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_10,	17,	28,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_9,		18,	0,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_8,		18,	4,	15,	2,	false)
+	MUX_CFG(DA850, LCD_PCLK,	18,	24,	15,	2,	false)
+	MUX_CFG(DA850, LCD_HSYNC,	19,	0,	15,	2,	false)
+	MUX_CFG(DA850, LCD_VSYNC,	19,	4,	15,	2,	false)
+	MUX_CFG(DA850, NLCD_AC_ENB_CS,	19,	24,	15,	2,	false)
+	/* GPIO function */
+	MUX_CFG(DA850, GPIO2_15,	5,	0,	15,	8,	false)
+	MUX_CFG(DA850, GPIO8_10,	18,	28,	15,	8,	false)
 #endif
 };
 
@@ -449,6 +481,16 @@ const short da850_mcasp_pins[] __initdata = {
 	-1
 };
 
+const short da850_lcdcntl_pins[] __initdata = {
+	DA850_LCD_D_1, DA850_LCD_D_2, DA850_LCD_D_3, DA850_LCD_D_4,
+	DA850_LCD_D_5, DA850_LCD_D_6, DA850_LCD_D_7, DA850_LCD_D_8,
+	DA850_LCD_D_9, DA850_LCD_D_10, DA850_LCD_D_11, DA850_LCD_D_12,
+	DA850_LCD_D_13, DA850_LCD_D_14, DA850_LCD_D_15, DA850_LCD_PCLK,
+	DA850_LCD_HSYNC, DA850_LCD_VSYNC, DA850_NLCD_AC_ENB_CS, DA850_GPIO2_15,
+	DA850_GPIO8_10,
+	-1
+};
+
 /* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
 static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = {
 	[IRQ_DA8XX_COMMTX]		= 7,
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 1882eef3aea..094eb8ed8e7 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -21,6 +21,7 @@
 #include <mach/common.h>
 #include <mach/time.h>
 #include <mach/da8xx.h>
+#include <video/da8xx-fb.h>
 
 #include "clock.h"
 
@@ -353,3 +354,61 @@ void __init da8xx_init_mcasp(int id, struct snd_platform_data *pdata)
 		platform_device_register(&da850_mcasp_device);
 	}
 }
+
+static const struct display_panel disp_panel = {
+	QVGA,
+	16,
+	16,
+	COLOR_ACTIVE,
+};
+
+static struct lcd_ctrl_config lcd_cfg = {
+	&disp_panel,
+	.ac_bias		= 255,
+	.ac_bias_intrpt		= 0,
+	.dma_burst_sz		= 16,
+	.bpp			= 16,
+	.fdd			= 255,
+	.tft_alt_mode		= 0,
+	.stn_565_mode		= 0,
+	.mono_8bit_mode		= 0,
+	.invert_line_clock	= 1,
+	.invert_frm_clock	= 1,
+	.sync_edge		= 0,
+	.sync_ctrl		= 1,
+	.raster_order		= 0,
+};
+
+static struct da8xx_lcdc_platform_data da850_evm_lcdc_pdata = {
+	.manu_name = "sharp",
+	.controller_data = &lcd_cfg,
+	.type = "Sharp_LK043T1DG01",
+};
+
+static struct resource da8xx_lcdc_resources[] = {
+	[0] = { /* registers */
+		.start  = DA8XX_LCD_CNTRL_BASE,
+		.end    = DA8XX_LCD_CNTRL_BASE + SZ_4K - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = { /* interrupt */
+		.start  = IRQ_DA8XX_LCDINT,
+		.end    = IRQ_DA8XX_LCDINT,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device da850_lcdc_device = {
+	.name		= "da8xx_lcdc",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(da8xx_lcdc_resources),
+	.resource	= da8xx_lcdc_resources,
+	.dev = {
+		.platform_data = &da850_evm_lcdc_pdata,
+	}
+};
+
+int __init da8xx_register_lcdc(void)
+{
+	return platform_device_register(&da850_lcdc_device);
+}
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 30c5c407ea8..0af3fb6077a 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -37,6 +37,7 @@
 #define DA8XX_TIMER64P1_BASE	0x01c21000
 #define DA8XX_GPIO_BASE		0x01e26000
 #define DA8XX_PSC1_BASE		0x01e27000
+#define DA8XX_LCD_CNTRL_BASE	0x01e13000
 
 #define PINMUX0			0x00
 #define PINMUX1			0x04
@@ -66,6 +67,7 @@ int da8xx_register_edma(void);
 int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata);
 int da8xx_register_watchdog(void);
 int da8xx_register_emac(void);
+int da8xx_register_lcdc(void);
 void __init da8xx_init_mcasp(int id, struct snd_platform_data *pdata);
 
 extern struct platform_device da8xx_serial_device;
@@ -103,6 +105,7 @@ extern const short da850_i2c0_pins[];
 extern const short da850_i2c1_pins[];
 extern const short da850_cpgmac_pins[];
 extern const short da850_mcasp_pins[];
+extern const short da850_lcdcntl_pins[];
 
 int da8xx_pinmux_setup(const short pins[]);
 
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index 82d75146185..30bf329d537 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -775,6 +775,32 @@ enum davinci_da850_index {
 	DA850_AXR_2,
 	DA850_AXR_1,
 	DA850_AXR_0,
+
+	/* LCD function */
+	DA850_LCD_D_7,
+	DA850_LCD_D_6,
+	DA850_LCD_D_5,
+	DA850_LCD_D_4,
+	DA850_LCD_D_3,
+	DA850_LCD_D_2,
+	DA850_LCD_D_1,
+	DA850_LCD_D_0,
+	DA850_LCD_D_15,
+	DA850_LCD_D_14,
+	DA850_LCD_D_13,
+	DA850_LCD_D_12,
+	DA850_LCD_D_11,
+	DA850_LCD_D_10,
+	DA850_LCD_D_9,
+	DA850_LCD_D_8,
+	DA850_LCD_PCLK,
+	DA850_LCD_HSYNC,
+	DA850_LCD_VSYNC,
+	DA850_NLCD_AC_ENB_CS,
+
+	/* GPIO function */
+	DA850_GPIO2_15,
+	DA850_GPIO8_10,
 };
 
 #ifdef CONFIG_DAVINCI_MUX
-- 
cgit v1.2.3


From 700691f27ed9b0891cece9032e4de8c0b482c625 Mon Sep 17 00:00:00 2001
From: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Date: Thu, 13 Aug 2009 15:16:23 -0400
Subject: davinci: Add MMC/SD support for da850/omap-l138

There are two instances of MMC/SD on da850/omap-l138.
Connector for the first instance is available on the
EVM. This patch adds support for this instance.

This patch also adds support for card detect and write
protect switches on da850/omap-l138 EVM.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-da850-evm.c    | 42 ++++++++++++++++++++++++++++++
 arch/arm/mach-davinci/da850.c              | 23 ++++++++++++++++
 arch/arm/mach-davinci/devices-da8xx.c      | 36 +++++++++++++++++++++++++
 arch/arm/mach-davinci/include/mach/da8xx.h |  4 +++
 arch/arm/mach-davinci/include/mach/mux.h   | 10 +++++++
 5 files changed, 115 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index b1df784ed70..eb998ce6d46 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -33,6 +33,9 @@
 #define DA850_LCD_BL_PIN		GPIO_TO_PIN(2, 15)
 #define DA850_LCD_PWR_PIN		GPIO_TO_PIN(8, 10)
 
+#define DA850_MMCSD_CD_PIN		GPIO_TO_PIN(4, 0)
+#define DA850_MMCSD_WP_PIN		GPIO_TO_PIN(4, 1)
+
 static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
 	.bus_freq	= 100,	/* kHz */
 	.bus_delay	= 0,	/* usec */
@@ -63,6 +66,23 @@ static struct snd_platform_data da850_evm_snd_data = {
 	.rxnumevt	= 1,
 };
 
+static int da850_evm_mmc_get_ro(int index)
+{
+	return gpio_get_value(DA850_MMCSD_WP_PIN);
+}
+
+static int da850_evm_mmc_get_cd(int index)
+{
+	return !gpio_get_value(DA850_MMCSD_CD_PIN);
+}
+
+static struct davinci_mmc_config da850_mmc_config = {
+	.get_ro		= da850_evm_mmc_get_ro,
+	.get_cd		= da850_evm_mmc_get_cd,
+	.wires		= 4,
+	.version	= MMC_CTLR_VERSION_2,
+};
+
 static int da850_lcd_hw_init(void)
 {
 	int status;
@@ -134,6 +154,28 @@ static __init void da850_evm_init(void)
 		pr_warning("da830_evm_init: watchdog registration failed: %d\n",
 				ret);
 
+	ret = da8xx_pinmux_setup(da850_mmcsd0_pins);
+	if (ret)
+		pr_warning("da850_evm_init: mmcsd0 mux setup failed: %d\n",
+				ret);
+
+	ret = gpio_request(DA850_MMCSD_CD_PIN, "MMC CD\n");
+	if (ret)
+		pr_warning("da850_evm_init: can not open GPIO %d\n",
+				DA850_MMCSD_CD_PIN);
+	gpio_direction_input(DA850_MMCSD_CD_PIN);
+
+	ret = gpio_request(DA850_MMCSD_WP_PIN, "MMC WP\n");
+	if (ret)
+		pr_warning("da850_evm_init: can not open GPIO %d\n",
+				DA850_MMCSD_WP_PIN);
+	gpio_direction_input(DA850_MMCSD_WP_PIN);
+
+	ret = da8xx_register_mmcsd0(&da850_mmc_config);
+	if (ret)
+		pr_warning("da850_evm_init: mmcsd0 registration failed: %d\n",
+				ret);
+
 	davinci_serial_init(&da850_evm_uart_config);
 
 	/*
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index e6e605bf151..9debd57deb7 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -304,6 +304,12 @@ static struct clk lcdc_clk = {
 	.psc_ctlr	= 1,
 };
 
+static struct clk mmcsd_clk = {
+	.name		= "mmcsd",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_MMC_SD,
+};
+
 static struct davinci_clk da850_clks[] = {
 	CLK(NULL,		"ref",		&ref_clk),
 	CLK(NULL,		"pll0",		&pll0_clk),
@@ -343,6 +349,7 @@ static struct davinci_clk da850_clks[] = {
 	CLK("davinci_emac.1",	NULL,		&emac_clk),
 	CLK("davinci-mcasp.0",	NULL,		&mcasp_clk),
 	CLK("da8xx_lcdc.0",	NULL,		&lcdc_clk),
+	CLK("davinci_mmc.0",	NULL,		&mmcsd_clk),
 	CLK(NULL,		NULL,		NULL),
 };
 
@@ -434,9 +441,18 @@ static const struct mux_config da850_pins[] = {
 	MUX_CFG(DA850, LCD_HSYNC,	19,	0,	15,	2,	false)
 	MUX_CFG(DA850, LCD_VSYNC,	19,	4,	15,	2,	false)
 	MUX_CFG(DA850, NLCD_AC_ENB_CS,	19,	24,	15,	2,	false)
+	/* MMC/SD0 function */
+	MUX_CFG(DA850, MMCSD0_DAT_0,	10,	8,	15,	2,	false)
+	MUX_CFG(DA850, MMCSD0_DAT_1,	10,	12,	15,	2,	false)
+	MUX_CFG(DA850, MMCSD0_DAT_2,	10,	16,	15,	2,	false)
+	MUX_CFG(DA850, MMCSD0_DAT_3,	10,	20,	15,	2,	false)
+	MUX_CFG(DA850, MMCSD0_CLK,	10,	0,	15,	2,	false)
+	MUX_CFG(DA850, MMCSD0_CMD,	10,	4,	15,	2,	false)
 	/* GPIO function */
 	MUX_CFG(DA850, GPIO2_15,	5,	0,	15,	8,	false)
 	MUX_CFG(DA850, GPIO8_10,	18,	28,	15,	8,	false)
+	MUX_CFG(DA850, GPIO4_0,		10,	28,	15,	8,	false)
+	MUX_CFG(DA850, GPIO4_1,		10,	24,	15,	8,	false)
 #endif
 };
 
@@ -491,6 +507,13 @@ const short da850_lcdcntl_pins[] __initdata = {
 	-1
 };
 
+const short da850_mmcsd0_pins[] __initdata = {
+	DA850_MMCSD0_DAT_0, DA850_MMCSD0_DAT_1, DA850_MMCSD0_DAT_2,
+	DA850_MMCSD0_DAT_3, DA850_MMCSD0_CLK, DA850_MMCSD0_CMD,
+	DA850_GPIO4_0, DA850_GPIO4_1,
+	-1
+};
+
 /* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
 static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = {
 	[IRQ_DA8XX_COMMTX]		= 7,
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 094eb8ed8e7..58ad5b66fd6 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -412,3 +412,39 @@ int __init da8xx_register_lcdc(void)
 {
 	return platform_device_register(&da850_lcdc_device);
 }
+
+static struct resource da8xx_mmcsd0_resources[] = {
+	{		/* registers */
+		.start	= DA8XX_MMCSD0_BASE,
+		.end	= DA8XX_MMCSD0_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{		/* interrupt */
+		.start	= IRQ_DA8XX_MMCSDINT0,
+		.end	= IRQ_DA8XX_MMCSDINT0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{		/* DMA RX */
+		.start	= EDMA_CTLR_CHAN(0, 16),
+		.end	= EDMA_CTLR_CHAN(0, 16),
+		.flags	= IORESOURCE_DMA,
+	},
+	{		/* DMA TX */
+		.start	= EDMA_CTLR_CHAN(0, 17),
+		.end	= EDMA_CTLR_CHAN(0, 17),
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device da8xx_mmcsd0_device = {
+	.name		= "davinci_mmc",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(da8xx_mmcsd0_resources),
+	.resource	= da8xx_mmcsd0_resources,
+};
+
+int __init da8xx_register_mmcsd0(struct davinci_mmc_config *config)
+{
+	da8xx_mmcsd0_device.dev.platform_data = config;
+	return platform_device_register(&da8xx_mmcsd0_device);
+}
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 0af3fb6077a..0af141ffc3b 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -16,6 +16,7 @@
 #include <mach/i2c.h>
 #include <mach/emac.h>
 #include <mach/asp.h>
+#include <mach/mmc.h>
 
 /*
  * The cp_intc interrupt controller for the da8xx isn't in the same
@@ -38,6 +39,7 @@
 #define DA8XX_GPIO_BASE		0x01e26000
 #define DA8XX_PSC1_BASE		0x01e27000
 #define DA8XX_LCD_CNTRL_BASE	0x01e13000
+#define DA8XX_MMCSD0_BASE	0x01c40000
 
 #define PINMUX0			0x00
 #define PINMUX1			0x04
@@ -68,6 +70,7 @@ int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata);
 int da8xx_register_watchdog(void);
 int da8xx_register_emac(void);
 int da8xx_register_lcdc(void);
+int da8xx_register_mmcsd0(struct davinci_mmc_config *config);
 void __init da8xx_init_mcasp(int id, struct snd_platform_data *pdata);
 
 extern struct platform_device da8xx_serial_device;
@@ -106,6 +109,7 @@ extern const short da850_i2c1_pins[];
 extern const short da850_cpgmac_pins[];
 extern const short da850_mcasp_pins[];
 extern const short da850_lcdcntl_pins[];
+extern const short da850_mmcsd0_pins[];
 
 int da8xx_pinmux_setup(const short pins[]);
 
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index 30bf329d537..b2335640c22 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -798,9 +798,19 @@ enum davinci_da850_index {
 	DA850_LCD_VSYNC,
 	DA850_NLCD_AC_ENB_CS,
 
+	/* MMC/SD0 function */
+	DA850_MMCSD0_DAT_0,
+	DA850_MMCSD0_DAT_1,
+	DA850_MMCSD0_DAT_2,
+	DA850_MMCSD0_DAT_3,
+	DA850_MMCSD0_CLK,
+	DA850_MMCSD0_CMD,
+
 	/* GPIO function */
 	DA850_GPIO2_15,
 	DA850_GPIO8_10,
+	DA850_GPIO4_0,
+	DA850_GPIO4_1,
 };
 
 #ifdef CONFIG_DAVINCI_MUX
-- 
cgit v1.2.3


From 38beb929f2c33a37bf3af6103c064a9edfbe242b Mon Sep 17 00:00:00 2001
From: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Date: Thu, 13 Aug 2009 16:21:11 -0400
Subject: davinci: Add NAND flash support for DA850/OMAP-L138

This patch adds platform data for the 512MB NAND Flash
found on DA850/OMAP-L138 EVM. Currently it supports
only 1-bit ECC.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-da850-evm.c    | 85 ++++++++++++++++++++++++++++++
 arch/arm/mach-davinci/da850.c              | 31 +++++++++++
 arch/arm/mach-davinci/include/mach/da8xx.h |  3 ++
 arch/arm/mach-davinci/include/mach/mux.h   | 16 ++++++
 4 files changed, 135 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index eb998ce6d46..62d37cb6f29 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -18,6 +18,10 @@
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
 #include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -26,6 +30,7 @@
 #include <mach/irqs.h>
 #include <mach/cp_intc.h>
 #include <mach/da8xx.h>
+#include <mach/nand.h>
 
 #define DA850_EVM_PHY_MASK		0x1
 #define DA850_EVM_MDIO_FREQUENCY	2200000 /* PHY bus frequency */
@@ -36,6 +41,74 @@
 #define DA850_MMCSD_CD_PIN		GPIO_TO_PIN(4, 0)
 #define DA850_MMCSD_WP_PIN		GPIO_TO_PIN(4, 1)
 
+/* DA850/OMAP-L138 EVM includes a 512 MByte large-page NAND flash
+ * (128K blocks). It may be used instead of the (default) SPI flash
+ * to boot, using TI's tools to install the secondary boot loader
+ * (UBL) and U-Boot.
+ */
+struct mtd_partition da850_evm_nandflash_partition[] = {
+	{
+		.name		= "u-boot env",
+		.offset		= 0,
+		.size		= SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,
+	 },
+	{
+		.name		= "UBL",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "u-boot",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 4 * SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "kernel",
+		.offset		= 0x200000,
+		.size		= SZ_2M,
+		.mask_flags	= 0,
+	},
+	{
+		.name		= "filesystem",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0,
+	},
+};
+
+static struct davinci_nand_pdata da850_evm_nandflash_data = {
+	.parts		= da850_evm_nandflash_partition,
+	.nr_parts	= ARRAY_SIZE(da850_evm_nandflash_partition),
+	.ecc_mode	= NAND_ECC_HW,
+	.options	= NAND_USE_FLASH_BBT,
+};
+
+static struct resource da850_evm_nandflash_resource[] = {
+	{
+		.start	= DA8XX_AEMIF_CS3_BASE,
+		.end	= DA8XX_AEMIF_CS3_BASE + SZ_512K + 2 * SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= DA8XX_AEMIF_CTL_BASE,
+		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device da850_evm_nandflash_device = {
+	.name		= "davinci_nand",
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &da850_evm_nandflash_data,
+	},
+	.num_resources	= ARRAY_SIZE(da850_evm_nandflash_resource),
+	.resource	= da850_evm_nandflash_resource,
+};
+
 static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
 	.bus_freq	= 100,	/* kHz */
 	.bus_delay	= 0,	/* usec */
@@ -45,6 +118,10 @@ static struct davinci_uart_config da850_evm_uart_config __initdata = {
 	.enabled_uarts = 0x7,
 };
 
+static struct platform_device *da850_evm_devices[] __initdata = {
+	&da850_evm_nandflash_device,
+};
+
 /* davinci da850 evm audio machine driver */
 static u8 da850_iis_serializer_direction[] = {
 	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
@@ -120,6 +197,14 @@ static __init void da850_evm_init(void)
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 	int ret;
 
+	ret = da8xx_pinmux_setup(da850_nand_pins);
+	if (ret)
+		pr_warning("da850_evm_init: nand mux setup failed: %d\n",
+				ret);
+
+	platform_add_devices(da850_evm_devices,
+				ARRAY_SIZE(da850_evm_devices));
+
 	ret = da8xx_register_edma();
 	if (ret)
 		pr_warning("da850_evm_init: edma registration failed: %d\n",
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 9debd57deb7..db420941345 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -310,6 +310,13 @@ static struct clk mmcsd_clk = {
 	.lpsc		= DA8XX_LPSC0_MMC_SD,
 };
 
+static struct clk aemif_clk = {
+	.name		= "aemif",
+	.parent		= &pll0_sysclk3,
+	.lpsc		= DA8XX_LPSC0_EMIF25,
+	.flags		= ALWAYS_ENABLED,
+};
+
 static struct davinci_clk da850_clks[] = {
 	CLK(NULL,		"ref",		&ref_clk),
 	CLK(NULL,		"pll0",		&pll0_clk),
@@ -350,6 +357,7 @@ static struct davinci_clk da850_clks[] = {
 	CLK("davinci-mcasp.0",	NULL,		&mcasp_clk),
 	CLK("da8xx_lcdc.0",	NULL,		&lcdc_clk),
 	CLK("davinci_mmc.0",	NULL,		&mmcsd_clk),
+	CLK(NULL,		"aemif",	&aemif_clk),
 	CLK(NULL,		NULL,		NULL),
 };
 
@@ -448,6 +456,21 @@ static const struct mux_config da850_pins[] = {
 	MUX_CFG(DA850, MMCSD0_DAT_3,	10,	20,	15,	2,	false)
 	MUX_CFG(DA850, MMCSD0_CLK,	10,	0,	15,	2,	false)
 	MUX_CFG(DA850, MMCSD0_CMD,	10,	4,	15,	2,	false)
+	/* EMIF2.5/EMIFA function */
+	MUX_CFG(DA850, EMA_D_7,		9,	0,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_6,		9,	4,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_5,		9,	8,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_4,		9,	12,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_3,		9,	16,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_2,		9,	20,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_1,		9,	24,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_0,		9,	28,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_1,		12,	24,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_2,		12,	20,	15,	1,	false)
+	MUX_CFG(DA850, NEMA_CS_3,	7,	4,	15,	1,	false)
+	MUX_CFG(DA850, NEMA_CS_4,	7,	8,	15,	1,	false)
+	MUX_CFG(DA850, NEMA_WE,		7,	16,	15,	1,	false)
+	MUX_CFG(DA850, NEMA_OE,		7,	20,	15,	1,	false)
 	/* GPIO function */
 	MUX_CFG(DA850, GPIO2_15,	5,	0,	15,	8,	false)
 	MUX_CFG(DA850, GPIO8_10,	18,	28,	15,	8,	false)
@@ -514,6 +537,14 @@ const short da850_mmcsd0_pins[] __initdata = {
 	-1
 };
 
+const short da850_nand_pins[] __initdata = {
+	DA850_EMA_D_7, DA850_EMA_D_6, DA850_EMA_D_5, DA850_EMA_D_4,
+	DA850_EMA_D_3, DA850_EMA_D_2, DA850_EMA_D_1, DA850_EMA_D_0,
+	DA850_EMA_A_1, DA850_EMA_A_2, DA850_NEMA_CS_3, DA850_NEMA_CS_4,
+	DA850_NEMA_WE, DA850_NEMA_OE,
+	-1
+};
+
 /* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
 static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = {
 	[IRQ_DA8XX_COMMTX]		= 7,
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 0af141ffc3b..77e5d2398e2 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -40,6 +40,8 @@
 #define DA8XX_PSC1_BASE		0x01e27000
 #define DA8XX_LCD_CNTRL_BASE	0x01e13000
 #define DA8XX_MMCSD0_BASE	0x01c40000
+#define DA8XX_AEMIF_CS3_BASE	0x62000000
+#define DA8XX_AEMIF_CTL_BASE	0x68000000
 
 #define PINMUX0			0x00
 #define PINMUX1			0x04
@@ -110,6 +112,7 @@ extern const short da850_cpgmac_pins[];
 extern const short da850_mcasp_pins[];
 extern const short da850_lcdcntl_pins[];
 extern const short da850_mmcsd0_pins[];
+extern const short da850_nand_pins[];
 
 int da8xx_pinmux_setup(const short pins[]);
 
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index b2335640c22..ee6f29db445 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -806,6 +806,22 @@ enum davinci_da850_index {
 	DA850_MMCSD0_CLK,
 	DA850_MMCSD0_CMD,
 
+	/* EMIF2.5/EMIFA function */
+	DA850_EMA_D_7,
+	DA850_EMA_D_6,
+	DA850_EMA_D_5,
+	DA850_EMA_D_4,
+	DA850_EMA_D_3,
+	DA850_EMA_D_2,
+	DA850_EMA_D_1,
+	DA850_EMA_D_0,
+	DA850_EMA_A_1,
+	DA850_EMA_A_2,
+	DA850_NEMA_CS_3,
+	DA850_NEMA_CS_4,
+	DA850_NEMA_WE,
+	DA850_NEMA_OE,
+
 	/* GPIO function */
 	DA850_GPIO2_15,
 	DA850_GPIO8_10,
-- 
cgit v1.2.3


From 7c5ec6095a7d29c89ee050281faa068a374a5ac6 Mon Sep 17 00:00:00 2001
From: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Date: Thu, 13 Aug 2009 17:36:25 -0400
Subject: davinci: Add NOR flash support for da850/omap-l138

This patch adds platform data for the 8MB NOR flash
found on da850/omap-l138 EVM. Both NOR and NAND can
co-exist on da850/omap-l138 as they are using different
chip selects.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-da850-evm.c    | 59 ++++++++++++++++++++++++++++++
 arch/arm/mach-davinci/da850.c              | 50 +++++++++++++++++++++++++
 arch/arm/mach-davinci/include/mach/da8xx.h |  2 +
 arch/arm/mach-davinci/include/mach/mux.h   | 34 +++++++++++++++++
 4 files changed, 145 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 62d37cb6f29..70a2f487da9 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -22,6 +22,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -41,6 +42,39 @@
 #define DA850_MMCSD_CD_PIN		GPIO_TO_PIN(4, 0)
 #define DA850_MMCSD_WP_PIN		GPIO_TO_PIN(4, 1)
 
+static struct mtd_partition da850_evm_norflash_partition[] = {
+	{
+		.name           = "NOR filesystem",
+		.offset         = 0,
+		.size           = MTDPART_SIZ_FULL,
+		.mask_flags     = 0,
+	},
+};
+
+static struct physmap_flash_data da850_evm_norflash_data = {
+	.width		= 2,
+	.parts		= da850_evm_norflash_partition,
+	.nr_parts	= ARRAY_SIZE(da850_evm_norflash_partition),
+};
+
+static struct resource da850_evm_norflash_resource[] = {
+	{
+		.start	= DA8XX_AEMIF_CS2_BASE,
+		.end	= DA8XX_AEMIF_CS2_BASE + SZ_32M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device da850_evm_norflash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data  = &da850_evm_norflash_data,
+	},
+	.num_resources	= 1,
+	.resource	= da850_evm_norflash_resource,
+};
+
 /* DA850/OMAP-L138 EVM includes a 512 MByte large-page NAND flash
  * (128K blocks). It may be used instead of the (default) SPI flash
  * to boot, using TI's tools to install the secondary boot loader
@@ -120,6 +154,7 @@ static struct davinci_uart_config da850_evm_uart_config __initdata = {
 
 static struct platform_device *da850_evm_devices[] __initdata = {
 	&da850_evm_nandflash_device,
+	&da850_evm_norflash_device,
 };
 
 /* davinci da850 evm audio machine driver */
@@ -192,6 +227,23 @@ static int da850_lcd_hw_init(void)
 	return 0;
 }
 
+#define DA8XX_AEMIF_CE2CFG_OFFSET	0x10
+#define DA8XX_AEMIF_ASIZE_16BIT		0x1
+
+static void __init da850_evm_init_nor(void)
+{
+	void __iomem *aemif_addr;
+
+	aemif_addr = ioremap(DA8XX_AEMIF_CTL_BASE, SZ_32K);
+
+	/* Configure data bus width of CS2 to 16 bit */
+	writel(readl(aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET) |
+		DA8XX_AEMIF_ASIZE_16BIT,
+		aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET);
+
+	iounmap(aemif_addr);
+}
+
 static __init void da850_evm_init(void)
 {
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
@@ -202,6 +254,13 @@ static __init void da850_evm_init(void)
 		pr_warning("da850_evm_init: nand mux setup failed: %d\n",
 				ret);
 
+	ret = da8xx_pinmux_setup(da850_nor_pins);
+	if (ret)
+		pr_warning("da850_evm_init: nor mux setup failed: %d\n",
+				ret);
+
+	da850_evm_init_nor();
+
 	platform_add_devices(da850_evm_devices,
 				ARRAY_SIZE(da850_evm_devices));
 
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index db420941345..192d719a47d 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -471,6 +471,40 @@ static const struct mux_config da850_pins[] = {
 	MUX_CFG(DA850, NEMA_CS_4,	7,	8,	15,	1,	false)
 	MUX_CFG(DA850, NEMA_WE,		7,	16,	15,	1,	false)
 	MUX_CFG(DA850, NEMA_OE,		7,	20,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_0,		12,	28,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_3,		12,	16,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_4,		12,	12,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_5,		12,	8,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_6,		12,	4,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_7,		12,	0,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_8,		11,	28,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_9,		11,	24,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_10,	11,	20,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_11,	11,	16,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_12,	11,	12,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_13,	11,	8,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_14,	11,	4,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_15,	11,	0,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_16,	10,	28,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_17,	10,	24,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_18,	10,	20,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_19,	10,	16,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_20,	10,	12,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_21,	10,	8,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_22,	10,	4,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_23,	10,	0,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_8,		8,	28,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_9,		8,	24,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_10,	8,	20,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_11,	8,	16,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_12,	8,	12,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_13,	8,	8,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_14,	8,	4,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_15,	8,	0,	15,	1,	false)
+	MUX_CFG(DA850, EMA_BA_1,	5,	24,	15,	1,	false)
+	MUX_CFG(DA850, EMA_CLK,		6,	0,	15,	1,	false)
+	MUX_CFG(DA850, EMA_WAIT_1,	6,	24,	15,	1,	false)
+	MUX_CFG(DA850, NEMA_CS_2,	7,	0,	15,	1,	false)
 	/* GPIO function */
 	MUX_CFG(DA850, GPIO2_15,	5,	0,	15,	8,	false)
 	MUX_CFG(DA850, GPIO8_10,	18,	28,	15,	8,	false)
@@ -545,6 +579,22 @@ const short da850_nand_pins[] __initdata = {
 	-1
 };
 
+const short da850_nor_pins[] __initdata = {
+	DA850_EMA_BA_1, DA850_EMA_CLK, DA850_EMA_WAIT_1, DA850_NEMA_CS_2,
+	DA850_NEMA_WE, DA850_NEMA_OE, DA850_EMA_D_0, DA850_EMA_D_1,
+	DA850_EMA_D_2, DA850_EMA_D_3, DA850_EMA_D_4, DA850_EMA_D_5,
+	DA850_EMA_D_6, DA850_EMA_D_7, DA850_EMA_D_8, DA850_EMA_D_9,
+	DA850_EMA_D_10, DA850_EMA_D_11, DA850_EMA_D_12, DA850_EMA_D_13,
+	DA850_EMA_D_14, DA850_EMA_D_15, DA850_EMA_A_0, DA850_EMA_A_1,
+	DA850_EMA_A_2, DA850_EMA_A_3, DA850_EMA_A_4, DA850_EMA_A_5,
+	DA850_EMA_A_6, DA850_EMA_A_7, DA850_EMA_A_8, DA850_EMA_A_9,
+	DA850_EMA_A_10, DA850_EMA_A_11, DA850_EMA_A_12, DA850_EMA_A_13,
+	DA850_EMA_A_14, DA850_EMA_A_15, DA850_EMA_A_16, DA850_EMA_A_17,
+	DA850_EMA_A_18, DA850_EMA_A_19, DA850_EMA_A_20, DA850_EMA_A_21,
+	DA850_EMA_A_22, DA850_EMA_A_23,
+	-1
+};
+
 /* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
 static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = {
 	[IRQ_DA8XX_COMMTX]		= 7,
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 77e5d2398e2..d4095d0572c 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -40,6 +40,7 @@
 #define DA8XX_PSC1_BASE		0x01e27000
 #define DA8XX_LCD_CNTRL_BASE	0x01e13000
 #define DA8XX_MMCSD0_BASE	0x01c40000
+#define DA8XX_AEMIF_CS2_BASE	0x60000000
 #define DA8XX_AEMIF_CS3_BASE	0x62000000
 #define DA8XX_AEMIF_CTL_BASE	0x68000000
 
@@ -113,6 +114,7 @@ extern const short da850_mcasp_pins[];
 extern const short da850_lcdcntl_pins[];
 extern const short da850_mmcsd0_pins[];
 extern const short da850_nand_pins[];
+extern const short da850_nor_pins[];
 
 int da8xx_pinmux_setup(const short pins[]);
 
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index ee6f29db445..88cd22af494 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -821,6 +821,40 @@ enum davinci_da850_index {
 	DA850_NEMA_CS_4,
 	DA850_NEMA_WE,
 	DA850_NEMA_OE,
+	DA850_EMA_D_15,
+	DA850_EMA_D_14,
+	DA850_EMA_D_13,
+	DA850_EMA_D_12,
+	DA850_EMA_D_11,
+	DA850_EMA_D_10,
+	DA850_EMA_D_9,
+	DA850_EMA_D_8,
+	DA850_EMA_A_0,
+	DA850_EMA_A_3,
+	DA850_EMA_A_4,
+	DA850_EMA_A_5,
+	DA850_EMA_A_6,
+	DA850_EMA_A_7,
+	DA850_EMA_A_8,
+	DA850_EMA_A_9,
+	DA850_EMA_A_10,
+	DA850_EMA_A_11,
+	DA850_EMA_A_12,
+	DA850_EMA_A_13,
+	DA850_EMA_A_14,
+	DA850_EMA_A_15,
+	DA850_EMA_A_16,
+	DA850_EMA_A_17,
+	DA850_EMA_A_18,
+	DA850_EMA_A_19,
+	DA850_EMA_A_20,
+	DA850_EMA_A_21,
+	DA850_EMA_A_22,
+	DA850_EMA_A_23,
+	DA850_EMA_BA_1,
+	DA850_EMA_CLK,
+	DA850_EMA_WAIT_1,
+	DA850_NEMA_CS_2,
 
 	/* GPIO function */
 	DA850_GPIO2_15,
-- 
cgit v1.2.3


From 820c4fe32ea11da338445d225cd51caa4cb69e43 Mon Sep 17 00:00:00 2001
From: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Date: Thu, 13 Aug 2009 18:16:28 -0400
Subject: davinci: Handle pinmux conflict between mmc/sd and nor flash

On DA850/OMAP-L138 EVM, MMC/SD and NOR Flash share
some of the AEMIF pins. This patch prints out a warning
during booting, if both MMC/SD and NOR Flash are enabled
in kernel menuconfig.

If both MMC/SD and NOR Flash are enabled, only MMC/SD
will work correctly.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-da850-evm.c | 63 ++++++++++++++++++++++-----------
 1 file changed, 42 insertions(+), 21 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 70a2f487da9..f2946a0cf6f 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -244,6 +244,20 @@ static void __init da850_evm_init_nor(void)
 	iounmap(aemif_addr);
 }
 
+#if defined(CONFIG_MTD_PHYSMAP) || \
+    defined(CONFIG_MTD_PHYSMAP_MODULE)
+#define HAS_NOR 1
+#else
+#define HAS_NOR 0
+#endif
+
+#if defined(CONFIG_MMC_DAVINCI) || \
+    defined(CONFIG_MMC_DAVINCI_MODULE)
+#define HAS_MMC 1
+#else
+#define HAS_MMC 0
+#endif
+
 static __init void da850_evm_init(void)
 {
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
@@ -298,27 +312,34 @@ static __init void da850_evm_init(void)
 		pr_warning("da830_evm_init: watchdog registration failed: %d\n",
 				ret);
 
-	ret = da8xx_pinmux_setup(da850_mmcsd0_pins);
-	if (ret)
-		pr_warning("da850_evm_init: mmcsd0 mux setup failed: %d\n",
-				ret);
-
-	ret = gpio_request(DA850_MMCSD_CD_PIN, "MMC CD\n");
-	if (ret)
-		pr_warning("da850_evm_init: can not open GPIO %d\n",
-				DA850_MMCSD_CD_PIN);
-	gpio_direction_input(DA850_MMCSD_CD_PIN);
-
-	ret = gpio_request(DA850_MMCSD_WP_PIN, "MMC WP\n");
-	if (ret)
-		pr_warning("da850_evm_init: can not open GPIO %d\n",
-				DA850_MMCSD_WP_PIN);
-	gpio_direction_input(DA850_MMCSD_WP_PIN);
-
-	ret = da8xx_register_mmcsd0(&da850_mmc_config);
-	if (ret)
-		pr_warning("da850_evm_init: mmcsd0 registration failed: %d\n",
-				ret);
+	if (HAS_MMC) {
+		if (HAS_NOR)
+			pr_warning("WARNING: both NOR Flash and MMC/SD are "
+				"enabled, but they share AEMIF pins.\n"
+				"\tDisable one of them.\n");
+
+		ret = da8xx_pinmux_setup(da850_mmcsd0_pins);
+		if (ret)
+			pr_warning("da850_evm_init: mmcsd0 mux setup failed:"
+					" %d\n", ret);
+
+		ret = gpio_request(DA850_MMCSD_CD_PIN, "MMC CD\n");
+		if (ret)
+			pr_warning("da850_evm_init: can not open GPIO %d\n",
+					DA850_MMCSD_CD_PIN);
+		gpio_direction_input(DA850_MMCSD_CD_PIN);
+
+		ret = gpio_request(DA850_MMCSD_WP_PIN, "MMC WP\n");
+		if (ret)
+			pr_warning("da850_evm_init: can not open GPIO %d\n",
+					DA850_MMCSD_WP_PIN);
+		gpio_direction_input(DA850_MMCSD_WP_PIN);
+
+		ret = da8xx_register_mmcsd0(&da850_mmc_config);
+		if (ret)
+			pr_warning("da850_evm_init: mmcsd0 registration failed:"
+					" %d\n", ret);
+	}
 
 	davinci_serial_init(&da850_evm_uart_config);
 
-- 
cgit v1.2.3


From 1aebb50e06b8c184dcf1dde4314cb782f42f9e21 Mon Sep 17 00:00:00 2001
From: Sandeep Paulraj <s-paulraj@ti.com>
Date: Fri, 21 Aug 2009 12:38:11 -0400
Subject: DaVinci: DM355: Adding PINMUX entries for DM355 Display

This patch adds PINMUX entries for DM355 Display.
These will be used by the DM355 display driver.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/dm355.c            | 6 ++++++
 arch/arm/mach-davinci/include/mach/mux.h | 7 +++++++
 2 files changed, 13 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 3abeb3eb9b2..4f42169c029 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -482,6 +482,12 @@ INT_CFG(DM355,  INT_EDMA_TC1_ERR,     4,    1,    1,     false)
 EVT_CFG(DM355,  EVT8_ASP1_TX,	      0,    1,    0,     false)
 EVT_CFG(DM355,  EVT9_ASP1_RX,	      1,    1,    0,     false)
 EVT_CFG(DM355,  EVT26_MMC0_RX,	      2,    1,    0,     false)
+
+MUX_CFG(DM355,	VOUT_FIELD,	1,   18,    3,	  1,	 false)
+MUX_CFG(DM355,	VOUT_FIELD_G70,	1,   18,    3,	  0,	 false)
+MUX_CFG(DM355,	VOUT_HVSYNC,	1,   16,    1,	  0,	 false)
+MUX_CFG(DM355,	VOUT_COUTL_EN,	1,   0,     0xff, 0x55,  false)
+MUX_CFG(DM355,	VOUT_COUTH_EN,	1,   8,     0xff, 0x55,  false)
 #endif
 };
 
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index 88cd22af494..7fad9b1a106 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -154,6 +154,13 @@ enum davinci_dm355_index {
 	DM355_EVT8_ASP1_TX,
 	DM355_EVT9_ASP1_RX,
 	DM355_EVT26_MMC0_RX,
+
+	/* Video Out */
+	DM355_VOUT_FIELD,
+	DM355_VOUT_FIELD_G70,
+	DM355_VOUT_HVSYNC,
+	DM355_VOUT_COUTL_EN,
+	DM355_VOUT_COUTH_EN,
 };
 
 enum davinci_dm365_index {
-- 
cgit v1.2.3


From 0c30e0d31b57375b1decad4cc0e139e2f7758986 Mon Sep 17 00:00:00 2001
From: Sandeep Paulraj <s-paulraj@ti.com>
Date: Tue, 18 Aug 2009 11:08:27 -0400
Subject: DaVinci: DM365: Adding entries for DM365 IRQ's

This patch adds definitions for some DM365 IRQs that are used by
the codecs. Codecs will also use the IRQs.
Entries are being added to enable/disable IRQ's.
There is no use as such for these entires in the kernel itself.
Instead these will be used by the "linuxutils" package of the DVSDK.

For further information on IRQ muxing refer to
http://focus.ti.com/lit/ug/sprufg5a/sprufg5a.pdf

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Sneha Narnakaje <nsnehaprabha@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/dm365.c             | 8 ++++++++
 arch/arm/mach-davinci/include/mach/irqs.h | 3 +++
 arch/arm/mach-davinci/include/mach/mux.h  | 8 ++++++++
 3 files changed, 19 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index f8bac9486b0..e8151743470 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -595,6 +595,14 @@ INT_CFG(DM365,  INT_EMAC_RXTHRESH,   14,    1,    1,     false)
 INT_CFG(DM365,  INT_EMAC_RXPULSE,    15,    1,    1,     false)
 INT_CFG(DM365,  INT_EMAC_TXPULSE,    16,    1,    1,     false)
 INT_CFG(DM365,  INT_EMAC_MISCPULSE,  17,    1,    1,     false)
+INT_CFG(DM365,  INT_IMX0_ENABLE,     0,     1,    0,     false)
+INT_CFG(DM365,  INT_IMX0_DISABLE,    0,     1,    1,     false)
+INT_CFG(DM365,  INT_HDVICP_ENABLE,   0,     1,    1,     false)
+INT_CFG(DM365,  INT_HDVICP_DISABLE,  0,     1,    0,     false)
+INT_CFG(DM365,  INT_IMX1_ENABLE,     24,    1,    1,     false)
+INT_CFG(DM365,  INT_IMX1_DISABLE,    24,    1,    0,     false)
+INT_CFG(DM365,  INT_NSF_ENABLE,      25,    1,    1,     false)
+INT_CFG(DM365,  INT_NSF_DISABLE,     25,    1,    0,     false)
 #endif
 };
 
diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h
index 7f755cc387e..3c918a77261 100644
--- a/arch/arm/mach-davinci/include/mach/irqs.h
+++ b/arch/arm/mach-davinci/include/mach/irqs.h
@@ -205,6 +205,9 @@
 
 /* DaVinci DM365-specific Interrupts */
 #define IRQ_DM365_INSFINT	7
+#define IRQ_DM365_IMXINT1	8
+#define IRQ_DM365_IMXINT0	10
+#define IRQ_DM365_KLD_ARMINT	10
 #define IRQ_DM365_IMCOPINT	11
 #define IRQ_DM365_RTOINT	13
 #define IRQ_DM365_TINT5		14
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index 7fad9b1a106..773283281be 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -301,6 +301,14 @@ enum davinci_dm365_index {
 	DM365_INT_EMAC_RXPULSE,
 	DM365_INT_EMAC_TXPULSE,
 	DM365_INT_EMAC_MISCPULSE,
+	DM365_INT_IMX0_ENABLE,
+	DM365_INT_IMX0_DISABLE,
+	DM365_INT_HDVICP_ENABLE,
+	DM365_INT_HDVICP_DISABLE,
+	DM365_INT_IMX1_ENABLE,
+	DM365_INT_IMX1_DISABLE,
+	DM365_INT_NSF_ENABLE,
+	DM365_INT_NSF_DISABLE,
 
 	/* EDMA event muxing */
 	DM365_EVT2_ASP_TX,
-- 
cgit v1.2.3


From 213765d7b40a455ced8596edfa3cc51b5f69d515 Mon Sep 17 00:00:00 2001
From: Sandeep Paulraj <s-paulraj@ti.com>
Date: Mon, 27 Jul 2009 15:10:36 -0400
Subject: DaVinci: EDMA: Adding 2 new APIs for allocating/freeing PARAMs

For best performance, codecs often setup linked triggered
transfers with a contiguous block of params, and that is when
this API is used. Setup/configuration of these parameter RAMs
is most efficient if they are contiguous.
There is an API to allocate a set of contiguous parameter RAMs and
a corresponding API to free a set of contiguous parameter RAMs

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/dma.c               | 137 ++++++++++++++++++++++++++++++
 arch/arm/mach-davinci/include/mach/edma.h |   7 ++
 2 files changed, 144 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c
index e6d7e6aca33..f2e57d27295 100644
--- a/arch/arm/mach-davinci/dma.c
+++ b/arch/arm/mach-davinci/dma.c
@@ -509,6 +509,45 @@ static irqreturn_t dma_tc1err_handler(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
+static int reserve_contiguous_params(int ctlr, unsigned int id,
+				     unsigned int num_params,
+				     unsigned int start_param)
+{
+	int i, j;
+	unsigned int count = num_params;
+
+	for (i = start_param; i < edma_info[ctlr]->num_slots; ++i) {
+		j = EDMA_CHAN_SLOT(i);
+		if (!test_and_set_bit(j, edma_info[ctlr]->edma_inuse))
+			count--;
+			if (count == 0)
+				break;
+		else if (id == EDMA_CONT_PARAMS_FIXED_EXACT)
+			break;
+		else
+			count = num_params;
+	}
+
+	/*
+	 * We have to clear any bits that we set
+	 * if we run out parameter RAMs, i.e we do find a set
+	 * of contiguous parameter RAMs but do not find the exact number
+	 * requested as we may reach the total number of parameter RAMs
+	 */
+	if (count) {
+		for (j = i - num_params + count + 1; j <= i ; ++j)
+			clear_bit(j, edma_info[ctlr]->edma_inuse);
+
+		return -EBUSY;
+	}
+
+	for (j = i - num_params + 1; j <= i; ++j)
+		memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(j),
+			&dummy_paramset, PARM_SIZE);
+
+	return EDMA_CTLR_CHAN(ctlr, i - num_params + 1);
+}
+
 /*-----------------------------------------------------------------------*/
 
 /* Resource alloc/free:  dma channels, parameter RAM slots */
@@ -700,6 +739,104 @@ void edma_free_slot(unsigned slot)
 }
 EXPORT_SYMBOL(edma_free_slot);
 
+
+/**
+ * edma_alloc_cont_slots- alloc contiguous parameter RAM slots
+ * The API will return the starting point of a set of
+ * contiguous PARAM's that have been requested
+ *
+ * @id: can only be EDMA_CONT_PARAMS_ANY or EDMA_CONT_PARAMS_FIXED_EXACT
+ * or EDMA_CONT_PARAMS_FIXED_NOT_EXACT
+ * @count: number of contiguous Paramter RAM's
+ * @param  - the start value of Parameter RAM that should be passed if id
+ * is EDMA_CONT_PARAMS_FIXED_EXACT or EDMA_CONT_PARAMS_FIXED_NOT_EXACT
+ *
+ * If id is EDMA_CONT_PARAMS_ANY then the API starts looking for a set of
+ * contiguous Parameter RAMs from parameter RAM 64 in the case of DaVinci SOCs
+ * and 32 in the case of Primus
+ *
+ * If id is EDMA_CONT_PARAMS_FIXED_EXACT then the API starts looking for a
+ * set of contiguous parameter RAMs from the "param" that is passed as an
+ * argument to the API.
+ *
+ * If id is EDMA_CONT_PARAMS_FIXED_NOT_EXACT then the API initially tries
+ * starts looking for a set of contiguous parameter RAMs from the "param"
+ * that is passed as an argument to the API. On failure the API will try to
+ * find a set of contiguous Parameter RAMs in the remaining Parameter RAMs
+ */
+int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count)
+{
+	/*
+	 * The start slot requested should be greater than
+	 * the number of channels and lesser than the total number
+	 * of slots
+	 */
+	if (slot < edma_info[ctlr]->num_channels ||
+		slot >= edma_info[ctlr]->num_slots)
+		return -EINVAL;
+
+	/*
+	 * The number of parameter RAMs requested cannot be less than 1
+	 * and cannot be more than the number of slots minus the number of
+	 * channels
+	 */
+	if (count < 1 || count >
+		(edma_info[ctlr]->num_slots - edma_info[ctlr]->num_channels))
+		return -EINVAL;
+
+	switch (id) {
+	case EDMA_CONT_PARAMS_ANY:
+		return reserve_contiguous_params(ctlr, id, count,
+						 edma_info[ctlr]->num_channels);
+	case EDMA_CONT_PARAMS_FIXED_EXACT:
+	case EDMA_CONT_PARAMS_FIXED_NOT_EXACT:
+		return reserve_contiguous_params(ctlr, id, count, slot);
+	default:
+		return -EINVAL;
+	}
+
+}
+EXPORT_SYMBOL(edma_alloc_cont_slots);
+
+/**
+ * edma_free_cont_slots - deallocate DMA parameter RAMs
+ * @slot: first parameter RAM of a set of parameter RAMs to be freed
+ * @count: the number of contiguous parameter RAMs to be freed
+ *
+ * This deallocates the parameter RAM slots allocated by
+ * edma_alloc_cont_slots.
+ * Callers/applications need to keep track of sets of contiguous
+ * parameter RAMs that have been allocated using the edma_alloc_cont_slots
+ * API.
+ * Callers are responsible for ensuring the slots are inactive, and will
+ * not be activated.
+ */
+int edma_free_cont_slots(unsigned slot, int count)
+{
+	unsigned ctlr;
+	int i;
+
+	ctlr = EDMA_CTLR(slot);
+	slot = EDMA_CHAN_SLOT(slot);
+
+	if (slot < edma_info[ctlr]->num_channels ||
+		slot >= edma_info[ctlr]->num_slots ||
+		count < 1)
+		return -EINVAL;
+
+	for (i = slot; i < slot + count; ++i) {
+		ctlr = EDMA_CTLR(i);
+		slot = EDMA_CHAN_SLOT(i);
+
+		memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
+			&dummy_paramset, PARM_SIZE);
+		clear_bit(slot, edma_info[ctlr]->edma_inuse);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(edma_free_cont_slots);
+
 /*-----------------------------------------------------------------------*/
 
 /* Parameter RAM operations (i) -- read/write partial slots */
diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h
index 3c7dc2db70e..eb8bfd7925e 100644
--- a/arch/arm/mach-davinci/include/mach/edma.h
+++ b/arch/arm/mach-davinci/include/mach/edma.h
@@ -226,6 +226,9 @@ enum sync_dimension {
 
 #define EDMA_CHANNEL_ANY		-1	/* for edma_alloc_channel() */
 #define EDMA_SLOT_ANY			-1	/* for edma_alloc_slot() */
+#define EDMA_CONT_PARAMS_ANY		 1001
+#define EDMA_CONT_PARAMS_FIXED_EXACT	 1002
+#define EDMA_CONT_PARAMS_FIXED_NOT_EXACT 1003
 
 /* alloc/free DMA channels and their dedicated parameter RAM slots */
 int edma_alloc_channel(int channel,
@@ -237,6 +240,10 @@ void edma_free_channel(unsigned channel);
 int edma_alloc_slot(unsigned ctlr, int slot);
 void edma_free_slot(unsigned slot);
 
+/* alloc/free a set of contiguous parameter RAM slots */
+int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count);
+int edma_free_cont_slots(unsigned slot, int count);
+
 /* calls that operate on part of a parameter RAM slot */
 void edma_set_src(unsigned slot, dma_addr_t src_port,
 				enum address_mode mode, enum fifo_width);
-- 
cgit v1.2.3


From 1a7ff8ff6eebfa732ca2abe00a0878136bfb2d01 Mon Sep 17 00:00:00 2001
From: Chaithrika U S <chaithrika@ti.com>
Date: Tue, 25 Aug 2009 15:20:05 +0300
Subject: davinci: audio: move tlv320aic33 i2c setup into board files

Tested on DM6446, DM355, DM6447, DA850 EVMs.

Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-da830-evm.c  | 3 +++
 arch/arm/mach-davinci/board-da850-evm.c  | 9 +++++++++
 arch/arm/mach-davinci/board-dm355-evm.c  | 2 +-
 arch/arm/mach-davinci/board-dm644x-evm.c | 4 +++-
 arch/arm/mach-davinci/board-dm646x-evm.c | 3 +++
 5 files changed, 19 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index a45340de746..bfbb63936f3 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -41,6 +41,9 @@ static struct i2c_board_info __initdata da830_evm_i2c_devices[] = {
 		I2C_BOARD_INFO("24c256", 0x50),
 		.platform_data	= &da830_evm_i2c_eeprom_info,
 	},
+	{
+		I2C_BOARD_INFO("tlv320aic3x", 0x18),
+	}
 };
 
 static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata = {
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index f2946a0cf6f..c759d72494e 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -143,6 +143,12 @@ static struct platform_device da850_evm_nandflash_device = {
 	.resource	= da850_evm_nandflash_resource,
 };
 
+static struct i2c_board_info __initdata da850_evm_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("tlv320aic3x", 0x18),
+	}
+};
+
 static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
 	.bus_freq	= 100,	/* kHz */
 	.bus_delay	= 0,	/* usec */
@@ -343,6 +349,9 @@ static __init void da850_evm_init(void)
 
 	davinci_serial_init(&da850_evm_uart_config);
 
+	i2c_register_board_info(1, da850_evm_i2c_devices,
+			ARRAY_SIZE(da850_evm_i2c_devices));
+
 	/*
 	 * shut down uart 0 and 1; they are not used on the board and
 	 * accessing them causes endless "too much work in irq53" messages
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 38157f78e1a..9f25fd8ca4a 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -139,7 +139,7 @@ static struct i2c_board_info dm355evm_i2c_info[] = {
 	{ I2C_BOARD_INFO("dm355evm_msp", 0x25),
 		.platform_data = dm355evm_mmcsd_gpios,
 		/* plus irq */ },
-	/* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */
+	{ I2C_BOARD_INFO("tlv320aic33", 0x1b), },
 	/* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */
 };
 
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 6a27c5db328..31cf84fbb01 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -559,8 +559,10 @@ static struct i2c_board_info __initdata i2c_info[] =  {
 		I2C_BOARD_INFO("24c256", 0x50),
 		.platform_data	= &eeprom_info,
 	},
+	{
+		I2C_BOARD_INFO("tlv320aic33", 0x1b),
+	},
 	/* ALSO:
-	 * - tvl320aic33 audio codec (0x1b)
 	 * - tvp5146 video decoder (0x5d)
 	 */
 };
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index cb30afe2205..20547049b48 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -299,6 +299,9 @@ static struct i2c_board_info __initdata i2c_info[] =  {
 	{
 		I2C_BOARD_INFO("cpld_reg0", 0x3a),
 	},
+	{
+		I2C_BOARD_INFO("tlv320aic33", 0x18),
+	}
 };
 
 static struct davinci_i2c_platform_data i2c_pdata = {
-- 
cgit v1.2.3


From 941132606c7611246d2034cb7b01f9270c2d1ede Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Fri, 28 Aug 2009 10:50:33 -0700
Subject: OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and
 OMAP2_IO_ADDRESS instead

Search and replace OMAP_IO_ADDRESS with OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS,
and convert omap_read/write into a functions instead of a macros.

Also rename OMAP_MPUIO_VBASE to OMAP1_MPUIO_VBASE.

In the long run, most code should use ioremap + __raw_read/write instead.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/devices.c                 |  2 +-
 arch/arm/mach-omap1/pm.h                      |  4 +-
 arch/arm/mach-omap1/serial.c                  |  6 +-
 arch/arm/mach-omap1/sram.S                    | 12 ++--
 arch/arm/mach-omap1/time.c                    |  4 +-
 arch/arm/mach-omap2/board-4430sdp.c           |  4 +-
 arch/arm/mach-omap2/cm.h                      |  6 +-
 arch/arm/mach-omap2/omap-smp.c                |  2 +-
 arch/arm/mach-omap2/pm-debug.c                |  2 +-
 arch/arm/mach-omap2/prm.h                     |  6 +-
 arch/arm/mach-omap2/sdrc.h                    |  6 +-
 arch/arm/mach-omap2/serial.c                  |  6 +-
 arch/arm/mach-omap2/sram242x.S                |  4 +-
 arch/arm/mach-omap2/sram243x.S                |  4 +-
 arch/arm/mach-omap2/timer-gp.c                |  2 +-
 arch/arm/plat-omap/dma.c                      |  8 +--
 arch/arm/plat-omap/dmtimer.c                  |  5 +-
 arch/arm/plat-omap/gpio.c                     | 86 +++++++++++++--------------
 arch/arm/plat-omap/include/mach/control.h     | 12 ++--
 arch/arm/plat-omap/include/mach/entry-macro.S |  8 +--
 arch/arm/plat-omap/include/mach/io.h          | 64 +++++++-------------
 arch/arm/plat-omap/include/mach/mtd-xip.h     |  2 +-
 arch/arm/plat-omap/include/mach/omap44xx.h    |  8 +--
 arch/arm/plat-omap/include/mach/sdrc.h        |  6 +-
 arch/arm/plat-omap/io.c                       | 58 ++++++++++++++++++
 arch/arm/plat-omap/sram.c                     | 20 +++----
 26 files changed, 193 insertions(+), 154 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index bbbaeb0abcd..06808434ea0 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -71,7 +71,7 @@ static inline void omap_init_rtc(void) {}
 #  define INT_DSP_MAILBOX1	INT_1610_DSP_MAILBOX1
 #endif
 
-#define OMAP1_MBOX_BASE		IO_ADDRESS(OMAP16XX_MAILBOX_BASE)
+#define OMAP1_MBOX_BASE		OMAP1_IO_ADDRESS(OMAP16XX_MAILBOX_BASE)
 
 static struct resource mbox_resources[] = {
 	{
diff --git a/arch/arm/mach-omap1/pm.h b/arch/arm/mach-omap1/pm.h
index 9ed5e2c1de4..c4f05bdcf8a 100644
--- a/arch/arm/mach-omap1/pm.h
+++ b/arch/arm/mach-omap1/pm.h
@@ -39,11 +39,11 @@
  * Register and offset definitions to be used in PM assembler code
  * ----------------------------------------------------------------------------
  */
-#define CLKGEN_REG_ASM_BASE		IO_ADDRESS(0xfffece00)
+#define CLKGEN_REG_ASM_BASE		OMAP1_IO_ADDRESS(0xfffece00)
 #define ARM_IDLECT1_ASM_OFFSET		0x04
 #define ARM_IDLECT2_ASM_OFFSET		0x08
 
-#define TCMIF_ASM_BASE			IO_ADDRESS(0xfffecc00)
+#define TCMIF_ASM_BASE			OMAP1_IO_ADDRESS(0xfffecc00)
 #define EMIFS_CONFIG_ASM_OFFSET		0x0c
 #define EMIFF_SDRAM_CONFIG_ASM_OFFSET	0x20
 
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index f754cee4f3c..6f54b2c591c 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -64,7 +64,7 @@ static void __init omap_serial_reset(struct plat_serial8250_port *p)
 
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
-		.membase	= IO_ADDRESS(OMAP_UART1_BASE),
+		.membase	= OMAP1_IO_ADDRESS(OMAP_UART1_BASE),
 		.mapbase	= OMAP_UART1_BASE,
 		.irq		= INT_UART1,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -73,7 +73,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.uartclk	= OMAP16XX_BASE_BAUD * 16,
 	},
 	{
-		.membase	= IO_ADDRESS(OMAP_UART2_BASE),
+		.membase	= OMAP1_IO_ADDRESS(OMAP_UART2_BASE),
 		.mapbase	= OMAP_UART2_BASE,
 		.irq		= INT_UART2,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -82,7 +82,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.uartclk	= OMAP16XX_BASE_BAUD * 16,
 	},
 	{
-		.membase	= IO_ADDRESS(OMAP_UART3_BASE),
+		.membase	= OMAP1_IO_ADDRESS(OMAP_UART3_BASE),
 		.mapbase	= OMAP_UART3_BASE,
 		.irq		= INT_UART3,
 		.flags		= UPF_BOOT_AUTOCONF,
diff --git a/arch/arm/mach-omap1/sram.S b/arch/arm/mach-omap1/sram.S
index 261cdc48228..7724e520d07 100644
--- a/arch/arm/mach-omap1/sram.S
+++ b/arch/arm/mach-omap1/sram.S
@@ -21,13 +21,13 @@
 ENTRY(omap1_sram_reprogram_clock)
 	stmfd	sp!, {r0 - r12, lr}		@ save registers on stack
 
-	mov	r2, #IO_ADDRESS(DPLL_CTL) & 0xff000000
-	orr	r2, r2, #IO_ADDRESS(DPLL_CTL) & 0x00ff0000
-	orr	r2, r2, #IO_ADDRESS(DPLL_CTL) & 0x0000ff00
+	mov	r2, #OMAP1_IO_ADDRESS(DPLL_CTL) & 0xff000000
+	orr	r2, r2, #OMAP1_IO_ADDRESS(DPLL_CTL) & 0x00ff0000
+	orr	r2, r2, #OMAP1_IO_ADDRESS(DPLL_CTL) & 0x0000ff00
 
-	mov	r3, #IO_ADDRESS(ARM_CKCTL) & 0xff000000
-	orr	r3, r3, #IO_ADDRESS(ARM_CKCTL) & 0x00ff0000
-	orr	r3, r3, #IO_ADDRESS(ARM_CKCTL) & 0x0000ff00
+	mov	r3, #OMAP1_IO_ADDRESS(ARM_CKCTL) & 0xff000000
+	orr	r3, r3, #OMAP1_IO_ADDRESS(ARM_CKCTL) & 0x00ff0000
+	orr	r3, r3, #OMAP1_IO_ADDRESS(ARM_CKCTL) & 0x0000ff00
 
 	tst	r0, #1 << 4			@ want lock mode?
 	beq	newck				@ nope
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 4d56408d3cf..1be6a214d88 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -62,8 +62,8 @@ typedef struct {
 	u32 read_tim;			/* READ_TIM,   R */
 } omap_mpu_timer_regs_t;
 
-#define omap_mpu_timer_base(n)						\
-((volatile omap_mpu_timer_regs_t*)IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
+#define omap_mpu_timer_base(n)							\
+((volatile omap_mpu_timer_regs_t*)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
 				 (n)*OMAP_MPU_TIMER_OFFSET))
 
 static inline unsigned long omap_mpu_timer_read(int nr)
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index b0c7402248f..bdfda36d8aa 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -53,8 +53,8 @@ static struct omap_board_config_kernel sdp4430_config[] __initdata = {
 
 static void __init gic_init_irq(void)
 {
-	gic_dist_init(0, IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29);
-	gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
+	gic_dist_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29);
+	gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
 }
 
 static void __init omap_4430sdp_init_irq(void)
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index f3c91a1ca39..18d9a121aa7 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -17,11 +17,11 @@
 #include "prcm-common.h"
 
 #define OMAP2420_CM_REGADDR(module, reg)				\
-			IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
+			OMAP2_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
 #define OMAP2430_CM_REGADDR(module, reg)				\
-			IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
+			OMAP2_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
 #define OMAP34XX_CM_REGADDR(module, reg)				\
-			IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
+			OMAP2_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
 
 /*
  * Architecture-specific global CM registers
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 8fe8d230f21..48ee295db27 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -54,7 +54,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	 * for us: do so
 	 */
 
-	gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
+	gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
 
 	/*
 	 * Synchronise with the boot thread.
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 6cc375a275b..da3a53f8ccc 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -48,7 +48,7 @@ int omap2_pm_debug;
 	regs[reg_count++].val = __raw_readl(reg)
 #define DUMP_INTC_REG(reg, off) \
 	regs[reg_count].name = #reg; \
-	regs[reg_count++].val = __raw_readl(IO_ADDRESS(0x480fe000 + (off)))
+	regs[reg_count++].val = __raw_readl(OMAP2_IO_ADDRESS(0x480fe000 + (off)))
 
 void omap2_pm_dump(int mode, int resume, unsigned int us)
 {
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 9937e281469..03c467c35f5 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -17,11 +17,11 @@
 #include "prcm-common.h"
 
 #define OMAP2420_PRM_REGADDR(module, reg)				\
-			IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
+			OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
 #define OMAP2430_PRM_REGADDR(module, reg)				\
-			IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
+			OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
 #define OMAP34XX_PRM_REGADDR(module, reg)				\
-			IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
+			OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
 
 /*
  * Architecture-specific global PRM registers
diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
index 1a8bbd09406..0837eda5f2b 100644
--- a/arch/arm/mach-omap2/sdrc.h
+++ b/arch/arm/mach-omap2/sdrc.h
@@ -48,9 +48,9 @@ static inline u32 sms_read_reg(u16 reg)
 	return __raw_readl(OMAP_SMS_REGADDR(reg));
 }
 #else
-#define OMAP242X_SDRC_REGADDR(reg)	IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
-#define OMAP243X_SDRC_REGADDR(reg)	IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
-#define OMAP34XX_SDRC_REGADDR(reg)	IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
+#define OMAP242X_SDRC_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
+#define OMAP243X_SDRC_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
+#define OMAP34XX_SDRC_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
 #endif	/* __ASSEMBLER__ */
 
 #endif
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index a7421a50410..42449002f60 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -73,7 +73,7 @@ static LIST_HEAD(uart_list);
 
 static struct plat_serial8250_port serial_platform_data0[] = {
 	{
-		.membase	= IO_ADDRESS(OMAP_UART1_BASE),
+		.membase	= OMAP2_IO_ADDRESS(OMAP_UART1_BASE),
 		.mapbase	= OMAP_UART1_BASE,
 		.irq		= 72,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -87,7 +87,7 @@ static struct plat_serial8250_port serial_platform_data0[] = {
 
 static struct plat_serial8250_port serial_platform_data1[] = {
 	{
-		.membase	= IO_ADDRESS(OMAP_UART2_BASE),
+		.membase	= OMAP2_IO_ADDRESS(OMAP_UART2_BASE),
 		.mapbase	= OMAP_UART2_BASE,
 		.irq		= 73,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -101,7 +101,7 @@ static struct plat_serial8250_port serial_platform_data1[] = {
 
 static struct plat_serial8250_port serial_platform_data2[] = {
 	{
-		.membase	= IO_ADDRESS(OMAP_UART3_BASE),
+		.membase	= OMAP2_IO_ADDRESS(OMAP_UART3_BASE),
 		.mapbase	= OMAP_UART3_BASE,
 		.irq		= 74,
 		.flags		= UPF_BOOT_AUTOCONF,
diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
index bb299851116..9b62208658b 100644
--- a/arch/arm/mach-omap2/sram242x.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -128,7 +128,7 @@ omap242x_sdi_prcm_voltctrl:
 prcm_mask_val:
 	.word 0xFFFF3FFC
 omap242x_sdi_timer_32ksynct_cr:
-	.word IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
+	.word OMAP2_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
 ENTRY(omap242x_sram_ddr_init_sz)
 	.word	. - omap242x_sram_ddr_init
 
@@ -224,7 +224,7 @@ omap242x_srs_prcm_voltctrl:
 ddr_prcm_mask_val:
 	.word 0xFFFF3FFC
 omap242x_srs_timer_32ksynct:
-	.word IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
+	.word OMAP2_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
 
 ENTRY(omap242x_sram_reprogram_sdrc_sz)
 	.word	. - omap242x_sram_reprogram_sdrc
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
index 9955abcaeb3..df2cd9277c0 100644
--- a/arch/arm/mach-omap2/sram243x.S
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -128,7 +128,7 @@ omap243x_sdi_prcm_voltctrl:
 prcm_mask_val:
 	.word 0xFFFF3FFC
 omap243x_sdi_timer_32ksynct_cr:
-	.word IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
+	.word OMAP2_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
 ENTRY(omap243x_sram_ddr_init_sz)
 	.word	. - omap243x_sram_ddr_init
 
@@ -224,7 +224,7 @@ omap243x_srs_prcm_voltctrl:
 ddr_prcm_mask_val:
 	.word 0xFFFF3FFC
 omap243x_srs_timer_32ksynct:
-	.word IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
+	.word OMAP2_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
 
 ENTRY(omap243x_sram_reprogram_sdrc_sz)
 	.word	. - omap243x_sram_reprogram_sdrc
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 97eeeebcb06..e2338c0aebc 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -231,7 +231,7 @@ static void __init omap2_gp_clocksource_init(void)
 static void __init omap2_gp_timer_init(void)
 {
 #ifdef CONFIG_LOCAL_TIMERS
-	twd_base = IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE);
+	twd_base = OMAP2_IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE);
 #endif
 	omap_dm_timer_init();
 
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index e3ac94f0900..bf086346210 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -2337,16 +2337,16 @@ static int __init omap_init_dma(void)
 	int ch, r;
 
 	if (cpu_class_is_omap1()) {
-		omap_dma_base = IO_ADDRESS(OMAP1_DMA_BASE);
+		omap_dma_base = OMAP1_IO_ADDRESS(OMAP1_DMA_BASE);
 		dma_lch_count = OMAP1_LOGICAL_DMA_CH_COUNT;
 	} else if (cpu_is_omap24xx()) {
-		omap_dma_base = IO_ADDRESS(OMAP24XX_DMA4_BASE);
+		omap_dma_base = OMAP2_IO_ADDRESS(OMAP24XX_DMA4_BASE);
 		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
 	} else if (cpu_is_omap34xx()) {
-		omap_dma_base = IO_ADDRESS(OMAP34XX_DMA4_BASE);
+		omap_dma_base = OMAP2_IO_ADDRESS(OMAP34XX_DMA4_BASE);
 		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
 	} else if (cpu_is_omap44xx()) {
-		omap_dma_base = IO_ADDRESS(OMAP44XX_DMA4_BASE);
+		omap_dma_base = OMAP2_IO_ADDRESS(OMAP44XX_DMA4_BASE);
 		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
 	} else {
 		pr_err("DMA init failed for unsupported omap\n");
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 7f50b6103de..d325b54daeb 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -774,7 +774,10 @@ int __init omap_dm_timer_init(void)
 
 	for (i = 0; i < dm_timer_count; i++) {
 		timer = &dm_timers[i];
-		timer->io_base = IO_ADDRESS(timer->phys_base);
+		if (cpu_class_is_omap1())
+			timer->io_base = OMAP1_IO_ADDRESS(timer->phys_base);
+		else
+			timer->io_base = OMAP2_IO_ADDRESS(timer->phys_base);
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
 					defined(CONFIG_ARCH_OMAP4)
 		if (cpu_class_is_omap2()) {
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 9298bc0ab17..fd63dd3bf4c 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -31,7 +31,7 @@
 /*
  * OMAP1510 GPIO registers
  */
-#define OMAP1510_GPIO_BASE		IO_ADDRESS(0xfffce000)
+#define OMAP1510_GPIO_BASE		OMAP1_IO_ADDRESS(0xfffce000)
 #define OMAP1510_GPIO_DATA_INPUT	0x00
 #define OMAP1510_GPIO_DATA_OUTPUT	0x04
 #define OMAP1510_GPIO_DIR_CONTROL	0x08
@@ -45,10 +45,10 @@
 /*
  * OMAP1610 specific GPIO registers
  */
-#define OMAP1610_GPIO1_BASE		IO_ADDRESS(0xfffbe400)
-#define OMAP1610_GPIO2_BASE		IO_ADDRESS(0xfffbec00)
-#define OMAP1610_GPIO3_BASE		IO_ADDRESS(0xfffbb400)
-#define OMAP1610_GPIO4_BASE		IO_ADDRESS(0xfffbbc00)
+#define OMAP1610_GPIO1_BASE		OMAP1_IO_ADDRESS(0xfffbe400)
+#define OMAP1610_GPIO2_BASE		OMAP1_IO_ADDRESS(0xfffbec00)
+#define OMAP1610_GPIO3_BASE		OMAP1_IO_ADDRESS(0xfffbb400)
+#define OMAP1610_GPIO4_BASE		OMAP1_IO_ADDRESS(0xfffbbc00)
 #define OMAP1610_GPIO_REVISION		0x0000
 #define OMAP1610_GPIO_SYSCONFIG		0x0010
 #define OMAP1610_GPIO_SYSSTATUS		0x0014
@@ -70,12 +70,12 @@
 /*
  * OMAP730 specific GPIO registers
  */
-#define OMAP730_GPIO1_BASE		IO_ADDRESS(0xfffbc000)
-#define OMAP730_GPIO2_BASE		IO_ADDRESS(0xfffbc800)
-#define OMAP730_GPIO3_BASE		IO_ADDRESS(0xfffbd000)
-#define OMAP730_GPIO4_BASE		IO_ADDRESS(0xfffbd800)
-#define OMAP730_GPIO5_BASE		IO_ADDRESS(0xfffbe000)
-#define OMAP730_GPIO6_BASE		IO_ADDRESS(0xfffbe800)
+#define OMAP730_GPIO1_BASE		OMAP1_IO_ADDRESS(0xfffbc000)
+#define OMAP730_GPIO2_BASE		OMAP1_IO_ADDRESS(0xfffbc800)
+#define OMAP730_GPIO3_BASE		OMAP1_IO_ADDRESS(0xfffbd000)
+#define OMAP730_GPIO4_BASE		OMAP1_IO_ADDRESS(0xfffbd800)
+#define OMAP730_GPIO5_BASE		OMAP1_IO_ADDRESS(0xfffbe000)
+#define OMAP730_GPIO6_BASE		OMAP1_IO_ADDRESS(0xfffbe800)
 #define OMAP730_GPIO_DATA_INPUT		0x00
 #define OMAP730_GPIO_DATA_OUTPUT	0x04
 #define OMAP730_GPIO_DIR_CONTROL	0x08
@@ -86,12 +86,12 @@
 /*
  * OMAP850 specific GPIO registers
  */
-#define OMAP850_GPIO1_BASE		IO_ADDRESS(0xfffbc000)
-#define OMAP850_GPIO2_BASE		IO_ADDRESS(0xfffbc800)
-#define OMAP850_GPIO3_BASE		IO_ADDRESS(0xfffbd000)
-#define OMAP850_GPIO4_BASE		IO_ADDRESS(0xfffbd800)
-#define OMAP850_GPIO5_BASE		IO_ADDRESS(0xfffbe000)
-#define OMAP850_GPIO6_BASE		IO_ADDRESS(0xfffbe800)
+#define OMAP850_GPIO1_BASE		OMAP1_IO_ADDRESS(0xfffbc000)
+#define OMAP850_GPIO2_BASE		OMAP1_IO_ADDRESS(0xfffbc800)
+#define OMAP850_GPIO3_BASE		OMAP1_IO_ADDRESS(0xfffbd000)
+#define OMAP850_GPIO4_BASE		OMAP1_IO_ADDRESS(0xfffbd800)
+#define OMAP850_GPIO5_BASE		OMAP1_IO_ADDRESS(0xfffbe000)
+#define OMAP850_GPIO6_BASE		OMAP1_IO_ADDRESS(0xfffbe800)
 #define OMAP850_GPIO_DATA_INPUT		0x00
 #define OMAP850_GPIO_DATA_OUTPUT	0x04
 #define OMAP850_GPIO_DIR_CONTROL	0x08
@@ -99,19 +99,21 @@
 #define OMAP850_GPIO_INT_MASK		0x10
 #define OMAP850_GPIO_INT_STATUS		0x14
 
+#define OMAP1_MPUIO_VBASE		OMAP1_IO_ADDRESS(OMAP_MPUIO_BASE)
+
 /*
  * omap24xx specific GPIO registers
  */
-#define OMAP242X_GPIO1_BASE		IO_ADDRESS(0x48018000)
-#define OMAP242X_GPIO2_BASE		IO_ADDRESS(0x4801a000)
-#define OMAP242X_GPIO3_BASE		IO_ADDRESS(0x4801c000)
-#define OMAP242X_GPIO4_BASE		IO_ADDRESS(0x4801e000)
+#define OMAP242X_GPIO1_BASE		OMAP2_IO_ADDRESS(0x48018000)
+#define OMAP242X_GPIO2_BASE		OMAP2_IO_ADDRESS(0x4801a000)
+#define OMAP242X_GPIO3_BASE		OMAP2_IO_ADDRESS(0x4801c000)
+#define OMAP242X_GPIO4_BASE		OMAP2_IO_ADDRESS(0x4801e000)
 
-#define OMAP243X_GPIO1_BASE		IO_ADDRESS(0x4900C000)
-#define OMAP243X_GPIO2_BASE		IO_ADDRESS(0x4900E000)
-#define OMAP243X_GPIO3_BASE		IO_ADDRESS(0x49010000)
-#define OMAP243X_GPIO4_BASE		IO_ADDRESS(0x49012000)
-#define OMAP243X_GPIO5_BASE		IO_ADDRESS(0x480B6000)
+#define OMAP243X_GPIO1_BASE		OMAP2_IO_ADDRESS(0x4900C000)
+#define OMAP243X_GPIO2_BASE		OMAP2_IO_ADDRESS(0x4900E000)
+#define OMAP243X_GPIO3_BASE		OMAP2_IO_ADDRESS(0x49010000)
+#define OMAP243X_GPIO4_BASE		OMAP2_IO_ADDRESS(0x49012000)
+#define OMAP243X_GPIO5_BASE		OMAP2_IO_ADDRESS(0x480B6000)
 
 #define OMAP24XX_GPIO_REVISION		0x0000
 #define OMAP24XX_GPIO_SYSCONFIG		0x0010
@@ -142,24 +144,22 @@
  * omap34xx specific GPIO registers
  */
 
-#define OMAP34XX_GPIO1_BASE		IO_ADDRESS(0x48310000)
-#define OMAP34XX_GPIO2_BASE		IO_ADDRESS(0x49050000)
-#define OMAP34XX_GPIO3_BASE		IO_ADDRESS(0x49052000)
-#define OMAP34XX_GPIO4_BASE		IO_ADDRESS(0x49054000)
-#define OMAP34XX_GPIO5_BASE		IO_ADDRESS(0x49056000)
-#define OMAP34XX_GPIO6_BASE		IO_ADDRESS(0x49058000)
+#define OMAP34XX_GPIO1_BASE		OMAP2_IO_ADDRESS(0x48310000)
+#define OMAP34XX_GPIO2_BASE		OMAP2_IO_ADDRESS(0x49050000)
+#define OMAP34XX_GPIO3_BASE		OMAP2_IO_ADDRESS(0x49052000)
+#define OMAP34XX_GPIO4_BASE		OMAP2_IO_ADDRESS(0x49054000)
+#define OMAP34XX_GPIO5_BASE		OMAP2_IO_ADDRESS(0x49056000)
+#define OMAP34XX_GPIO6_BASE		OMAP2_IO_ADDRESS(0x49058000)
 
 /*
  * OMAP44XX  specific GPIO registers
  */
-#define OMAP44XX_GPIO1_BASE             IO_ADDRESS(0x4a310000)
-#define OMAP44XX_GPIO2_BASE             IO_ADDRESS(0x48055000)
-#define OMAP44XX_GPIO3_BASE             IO_ADDRESS(0x48057000)
-#define OMAP44XX_GPIO4_BASE             IO_ADDRESS(0x48059000)
-#define OMAP44XX_GPIO5_BASE             IO_ADDRESS(0x4805B000)
-#define OMAP44XX_GPIO6_BASE             IO_ADDRESS(0x4805D000)
-
-#define OMAP_MPUIO_VBASE		IO_ADDRESS(OMAP_MPUIO_BASE)
+#define OMAP44XX_GPIO1_BASE             OMAP2_IO_ADDRESS(0x4a310000)
+#define OMAP44XX_GPIO2_BASE             OMAP2_IO_ADDRESS(0x48055000)
+#define OMAP44XX_GPIO3_BASE             OMAP2_IO_ADDRESS(0x48057000)
+#define OMAP44XX_GPIO4_BASE             OMAP2_IO_ADDRESS(0x48059000)
+#define OMAP44XX_GPIO5_BASE             OMAP2_IO_ADDRESS(0x4805B000)
+#define OMAP44XX_GPIO6_BASE             OMAP2_IO_ADDRESS(0x4805D000)
 
 struct gpio_bank {
 	void __iomem *base;
@@ -195,7 +195,7 @@ struct gpio_bank {
 
 #ifdef CONFIG_ARCH_OMAP16XX
 static struct gpio_bank gpio_bank_1610[5] = {
-	{ OMAP_MPUIO_VBASE,    INT_MPUIO,	    IH_MPUIO_BASE,     METHOD_MPUIO},
+	{ OMAP1_MPUIO_VBASE,    INT_MPUIO,	    IH_MPUIO_BASE,     METHOD_MPUIO},
 	{ OMAP1610_GPIO1_BASE, INT_GPIO_BANK1,	    IH_GPIO_BASE,      METHOD_GPIO_1610 },
 	{ OMAP1610_GPIO2_BASE, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16, METHOD_GPIO_1610 },
 	{ OMAP1610_GPIO3_BASE, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32, METHOD_GPIO_1610 },
@@ -205,14 +205,14 @@ static struct gpio_bank gpio_bank_1610[5] = {
 
 #ifdef CONFIG_ARCH_OMAP15XX
 static struct gpio_bank gpio_bank_1510[2] = {
-	{ OMAP_MPUIO_VBASE,   INT_MPUIO,      IH_MPUIO_BASE, METHOD_MPUIO },
+	{ OMAP1_MPUIO_VBASE,   INT_MPUIO,      IH_MPUIO_BASE, METHOD_MPUIO },
 	{ OMAP1510_GPIO_BASE, INT_GPIO_BANK1, IH_GPIO_BASE,  METHOD_GPIO_1510 }
 };
 #endif
 
 #ifdef CONFIG_ARCH_OMAP730
 static struct gpio_bank gpio_bank_730[7] = {
-	{ OMAP_MPUIO_VBASE,    INT_730_MPUIO,	    IH_MPUIO_BASE,	METHOD_MPUIO },
+	{ OMAP1_MPUIO_VBASE,    INT_730_MPUIO,	    IH_MPUIO_BASE,	METHOD_MPUIO },
 	{ OMAP730_GPIO1_BASE,  INT_730_GPIO_BANK1,  IH_GPIO_BASE,	METHOD_GPIO_730 },
 	{ OMAP730_GPIO2_BASE,  INT_730_GPIO_BANK2,  IH_GPIO_BASE + 32,	METHOD_GPIO_730 },
 	{ OMAP730_GPIO3_BASE,  INT_730_GPIO_BANK3,  IH_GPIO_BASE + 64,	METHOD_GPIO_730 },
diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h
index 8140dbccb7b..826d317cdbe 100644
--- a/arch/arm/plat-omap/include/mach/control.h
+++ b/arch/arm/plat-omap/include/mach/control.h
@@ -20,15 +20,15 @@
 
 #ifndef __ASSEMBLY__
 #define OMAP242X_CTRL_REGADDR(reg)					\
-	IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+	OMAP2_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
 #define OMAP243X_CTRL_REGADDR(reg)					\
-	IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+	OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
 #define OMAP343X_CTRL_REGADDR(reg)					\
-	IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+	OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
 #else
-#define OMAP242X_CTRL_REGADDR(reg)	IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
-#define OMAP243X_CTRL_REGADDR(reg)	IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
-#define OMAP343X_CTRL_REGADDR(reg)	IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#define OMAP242X_CTRL_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+#define OMAP243X_CTRL_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+#define OMAP343X_CTRL_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
 #endif /* __ASSEMBLY__ */
 
 /*
diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S
index 56426ed45ef..a5592991634 100644
--- a/arch/arm/plat-omap/include/mach/entry-macro.S
+++ b/arch/arm/plat-omap/include/mach/entry-macro.S
@@ -41,7 +41,7 @@
 		.endm
 
 		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =IO_ADDRESS(OMAP_IH1_BASE)
+		ldr	\base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE)
 		ldr	\irqnr, [\base, #IRQ_ITR_REG_OFFSET]
 		ldr	\tmp, [\base, #IRQ_MIR_REG_OFFSET]
 		mov	\irqstat, #0xffffffff
@@ -53,7 +53,7 @@
 		cmp	\irqnr, #0
 		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
 		cmpeq	\irqnr, #INT_IH2_IRQ
-		ldreq	\base, =IO_ADDRESS(OMAP_IH2_BASE)
+		ldreq	\base, =OMAP1_IO_ADDRESS(OMAP_IH2_BASE)
 		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
 		addeqs	\irqnr, \irqnr, #32
 1510:
@@ -68,9 +68,9 @@
 
 /* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */
 #if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430)
-#define OMAP2_VA_IC_BASE		IO_ADDRESS(OMAP24XX_IC_BASE)
+#define OMAP2_VA_IC_BASE		OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE)
 #elif defined(CONFIG_ARCH_OMAP34XX)
-#define OMAP2_VA_IC_BASE		IO_ADDRESS(OMAP34XX_IC_BASE)
+#define OMAP2_VA_IC_BASE		OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE)
 #endif
 #if defined(CONFIG_ARCH_OMAP4)
 #include <mach/omap44xx.h>
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index 21fb0efdda8..55659809478 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -54,15 +54,23 @@
  * ----------------------------------------------------------------------------
  */
 
+#ifdef __ASSEMBLER__
+#define IOMEM(x)		(x)
+#else
+#define IOMEM(x)		((void __force __iomem *)(x))
+#endif
+
+#define OMAP1_IO_OFFSET		0x01000000	/* Virtual IO = 0xfefb0000 */
+#define OMAP1_IO_ADDRESS(pa)	IOMEM((pa) - OMAP1_IO_OFFSET)
+
+#define OMAP2_IO_OFFSET		0x90000000
+#define OMAP2_IO_ADDRESS(pa)	IOMEM((pa) + OMAP2_IO_OFFSET) /* L3 and L4 */
+
 #if defined(CONFIG_ARCH_OMAP1)
 
 #define IO_PHYS			0xFFFB0000
-#define IO_OFFSET		0x01000000	/* Virtual IO = 0xfefb0000 */
 #define IO_SIZE			0x40000
-#define IO_VIRT			(IO_PHYS - IO_OFFSET)
-#define __IO_ADDRESS(pa)	((pa) - IO_OFFSET)
-#define __OMAP1_IO_ADDRESS(pa)	((pa) - IO_OFFSET)
-#define io_v2p(va)		((va) + IO_OFFSET)
+#define IO_VIRT			(IO_PHYS - OMAP1_IO_OFFSET)
 
 #elif defined(CONFIG_ARCH_OMAP2)
 
@@ -87,11 +95,6 @@
 #define OMAP243X_SMS_VIRT	0xFC000000
 #define OMAP243X_SMS_SIZE	SZ_1M
 
-#define IO_OFFSET		0x90000000
-#define __IO_ADDRESS(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
-#define __OMAP2_IO_ADDRESS(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
-#define io_v2p(va)		((va) - IO_OFFSET)	/* Works for L3 and L4 */
-
 /* DSP */
 #define DSP_MEM_24XX_PHYS	OMAP2420_DSP_MEM_BASE	/* 0x58000000 */
 #define DSP_MEM_24XX_VIRT	0xe0000000
@@ -143,12 +146,6 @@
 #define OMAP343X_SDRC_VIRT	0xFD000000
 #define OMAP343X_SDRC_SIZE	SZ_1M
 
-
-#define IO_OFFSET		0x90000000
-#define __IO_ADDRESS(pa)	((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define __OMAP2_IO_ADDRESS(pa)	((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define io_v2p(va)		((va) - IO_OFFSET)/* Works for L3 and L4 */
-
 /* DSP */
 #define DSP_MEM_34XX_PHYS	OMAP34XX_DSP_MEM_BASE	/* 0x58000000 */
 #define DSP_MEM_34XX_VIRT	0xe0000000
@@ -188,39 +185,20 @@
 #define OMAP44XX_GPMC_VIRT	0xe0000000
 #define OMAP44XX_GPMC_SIZE	SZ_1M
 
-
-#define IO_OFFSET		0x90000000
-#define __IO_ADDRESS(pa)	((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define __OMAP2_IO_ADDRESS(pa)	((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define io_v2p(va)		((va) - IO_OFFSET)/* Works for L3 and L4 */
-
 #endif
 
-#define IO_ADDRESS(pa)		IOMEM(__IO_ADDRESS(pa))
-#define OMAP1_IO_ADDRESS(pa)	IOMEM(__OMAP1_IO_ADDRESS(pa))
-#define OMAP2_IO_ADDRESS(pa)	IOMEM(__OMAP2_IO_ADDRESS(pa))
-
-#ifdef __ASSEMBLER__
-#define IOMEM(x)		(x)
-#else
-#define IOMEM(x)		((void __force __iomem *)(x))
+#ifndef __ASSEMBLER__
 
 /*
- * Functions to access the OMAP IO region
- *
- * NOTE: - Use omap_read/write[bwl] for physical register addresses
- *	 - Use __raw_read/write[bwl]() for virtual register addresses
- *	 - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses
- *	 - DO NOT use hardcoded virtual addresses to allow changing the
- *	   IO address space again if needed
+ * NOTE: Please use ioremap + __raw_read/write where possible instead of these
  */
-#define omap_readb(a)		__raw_readb(IO_ADDRESS(a))
-#define omap_readw(a)		__raw_readw(IO_ADDRESS(a))
-#define omap_readl(a)		__raw_readl(IO_ADDRESS(a))
 
-#define omap_writeb(v,a)	__raw_writeb(v, IO_ADDRESS(a))
-#define omap_writew(v,a)	__raw_writew(v, IO_ADDRESS(a))
-#define omap_writel(v,a)	__raw_writel(v, IO_ADDRESS(a))
+extern u8 omap_readb(u32 pa);
+extern u16 omap_readw(u32 pa);
+extern u32 omap_readl(u32 pa);
+extern void omap_writeb(u8 v, u32 pa);
+extern void omap_writew(u16 v, u32 pa);
+extern void omap_writel(u32 v, u32 pa);
 
 struct omap_sdrc_params;
 
diff --git a/arch/arm/plat-omap/include/mach/mtd-xip.h b/arch/arm/plat-omap/include/mach/mtd-xip.h
index 39b591ff54b..f82a8dcaad9 100644
--- a/arch/arm/plat-omap/include/mach/mtd-xip.h
+++ b/arch/arm/plat-omap/include/mach/mtd-xip.h
@@ -25,7 +25,7 @@ typedef struct {
 } xip_omap_mpu_timer_regs_t;
 
 #define xip_omap_mpu_timer_base(n)					\
-((volatile xip_omap_mpu_timer_regs_t*)IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
+((volatile xip_omap_mpu_timer_regs_t*)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
 	(n)*OMAP_MPU_TIMER_OFFSET))
 
 static inline unsigned long xip_omap_mpu_timer_read(int nr)
diff --git a/arch/arm/plat-omap/include/mach/omap44xx.h b/arch/arm/plat-omap/include/mach/omap44xx.h
index 15dec7f1c7c..b3ba5ac7b4a 100644
--- a/arch/arm/plat-omap/include/mach/omap44xx.h
+++ b/arch/arm/plat-omap/include/mach/omap44xx.h
@@ -33,14 +33,14 @@
 #define IRQ_SIR_IRQ			0x0040
 #define OMAP44XX_GIC_DIST_BASE		0x48241000
 #define OMAP44XX_GIC_CPU_BASE		0x48240100
-#define OMAP44XX_VA_GIC_CPU_BASE	IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
+#define OMAP44XX_VA_GIC_CPU_BASE	OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
 #define OMAP44XX_SCU_BASE		0x48240000
-#define OMAP44XX_VA_SCU_BASE		IO_ADDRESS(OMAP44XX_SCU_BASE)
+#define OMAP44XX_VA_SCU_BASE		OMAP2_IO_ADDRESS(OMAP44XX_SCU_BASE)
 #define OMAP44XX_LOCAL_TWD_BASE		0x48240600
-#define OMAP44XX_VA_LOCAL_TWD_BASE	IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE)
+#define OMAP44XX_VA_LOCAL_TWD_BASE	OMAP2_IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE)
 #define OMAP44XX_LOCAL_TWD_SIZE		0x00000100
 #define OMAP44XX_WKUPGEN_BASE		0x48281000
-#define OMAP44XX_VA_WKUPGEN_BASE	IO_ADDRESS(OMAP44XX_WKUPGEN_BASE)
+#define OMAP44XX_VA_WKUPGEN_BASE	OMAP2_IO_ADDRESS(OMAP44XX_WKUPGEN_BASE)
 
 #endif /* __ASM_ARCH_OMAP44XX_H */
 
diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
index 0be18e4ff18..93f70d2cbce 100644
--- a/arch/arm/plat-omap/include/mach/sdrc.h
+++ b/arch/arm/plat-omap/include/mach/sdrc.h
@@ -71,11 +71,11 @@
  */
 
 #define OMAP242X_SMS_REGADDR(reg)					\
-			(void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg)
+			(void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
 #define OMAP243X_SMS_REGADDR(reg)					\
-			(void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg)
+			(void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
 #define OMAP343X_SMS_REGADDR(reg)					\
-			(void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg)
+			(void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE + reg)
 
 /* SMS register offsets - read/write with sms_{read,write}_reg() */
 
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
index 9b42d72d96c..d491ad15f19 100644
--- a/arch/arm/plat-omap/io.c
+++ b/arch/arm/plat-omap/io.c
@@ -132,3 +132,61 @@ void omap_iounmap(volatile void __iomem *addr)
 		__iounmap(addr);
 }
 EXPORT_SYMBOL(omap_iounmap);
+
+/*
+ * NOTE: Please use ioremap + __raw_read/write where possible instead of these
+ */
+
+u8 omap_readb(u32 pa)
+{
+	if (cpu_class_is_omap1())
+		return __raw_readb(OMAP1_IO_ADDRESS(pa));
+	else
+		return __raw_readb(OMAP2_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_readb);
+
+u16 omap_readw(u32 pa)
+{
+	if (cpu_class_is_omap1())
+		return __raw_readw(OMAP1_IO_ADDRESS(pa));
+	else
+		return __raw_readw(OMAP2_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_readw);
+
+u32 omap_readl(u32 pa)
+{
+	if (cpu_class_is_omap1())
+		return __raw_readl(OMAP1_IO_ADDRESS(pa));
+	else
+		return __raw_readl(OMAP2_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_readl);
+
+void omap_writeb(u8 v, u32 pa)
+{
+	if (cpu_class_is_omap1())
+		__raw_writeb(v, OMAP1_IO_ADDRESS(pa));
+	else
+		__raw_writeb(v, OMAP2_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_writeb);
+
+void omap_writew(u16 v, u32 pa)
+{
+	if (cpu_class_is_omap1())
+		__raw_writew(v, OMAP1_IO_ADDRESS(pa));
+	else
+		__raw_writew(v, OMAP2_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_writew);
+
+void omap_writel(u32 v, u32 pa)
+{
+	if (cpu_class_is_omap1())
+		__raw_writel(v, OMAP1_IO_ADDRESS(pa));
+	else
+		__raw_writel(v, OMAP2_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_writel);
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 5eae7876979..925f64711c3 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -56,16 +56,16 @@
 #define SRAM_BOOTLOADER_SZ	0x80
 #endif
 
-#define OMAP24XX_VA_REQINFOPERM0	IO_ADDRESS(0x68005048)
-#define OMAP24XX_VA_READPERM0		IO_ADDRESS(0x68005050)
-#define OMAP24XX_VA_WRITEPERM0		IO_ADDRESS(0x68005058)
-
-#define OMAP34XX_VA_REQINFOPERM0	IO_ADDRESS(0x68012848)
-#define OMAP34XX_VA_READPERM0		IO_ADDRESS(0x68012850)
-#define OMAP34XX_VA_WRITEPERM0		IO_ADDRESS(0x68012858)
-#define OMAP34XX_VA_ADDR_MATCH2		IO_ADDRESS(0x68012880)
-#define OMAP34XX_VA_SMS_RG_ATT0		IO_ADDRESS(0x6C000048)
-#define OMAP34XX_VA_CONTROL_STAT	IO_ADDRESS(0x480022F0)
+#define OMAP24XX_VA_REQINFOPERM0	OMAP2_IO_ADDRESS(0x68005048)
+#define OMAP24XX_VA_READPERM0		OMAP2_IO_ADDRESS(0x68005050)
+#define OMAP24XX_VA_WRITEPERM0		OMAP2_IO_ADDRESS(0x68005058)
+
+#define OMAP34XX_VA_REQINFOPERM0	OMAP2_IO_ADDRESS(0x68012848)
+#define OMAP34XX_VA_READPERM0		OMAP2_IO_ADDRESS(0x68012850)
+#define OMAP34XX_VA_WRITEPERM0		OMAP2_IO_ADDRESS(0x68012858)
+#define OMAP34XX_VA_ADDR_MATCH2		OMAP2_IO_ADDRESS(0x68012880)
+#define OMAP34XX_VA_SMS_RG_ATT0		OMAP2_IO_ADDRESS(0x6C000048)
+#define OMAP34XX_VA_CONTROL_STAT	OMAP2_IO_ADDRESS(0x480022F0)
 
 #define GP_DEVICE		0x300
 
-- 
cgit v1.2.3


From 6175556fdc0a66ce5f1831e22892fac6f28fc2ec Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Fri, 28 Aug 2009 10:50:34 -0700
Subject: OMAP: Rename OMAP_MPUIO_BASE to OMAP1_MPUIO_BASE

Rename OMAP_MPUIO_BASE to OMAP1_MPUIO_BASE

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/gpio.c              | 4 ++--
 arch/arm/plat-omap/include/mach/gpio.h | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index fd63dd3bf4c..b55b4adffbe 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -99,7 +99,7 @@
 #define OMAP850_GPIO_INT_MASK		0x10
 #define OMAP850_GPIO_INT_STATUS		0x14
 
-#define OMAP1_MPUIO_VBASE		OMAP1_IO_ADDRESS(OMAP_MPUIO_BASE)
+#define OMAP1_MPUIO_VBASE		OMAP1_IO_ADDRESS(OMAP1_MPUIO_BASE)
 
 /*
  * omap24xx specific GPIO registers
@@ -224,7 +224,7 @@ static struct gpio_bank gpio_bank_730[7] = {
 
 #ifdef CONFIG_ARCH_OMAP850
 static struct gpio_bank gpio_bank_850[7] = {
-	{ OMAP_MPUIO_BASE,     INT_850_MPUIO,	    IH_MPUIO_BASE,	METHOD_MPUIO },
+	{ OMAP1_MPUIO_BASE,     INT_850_MPUIO,	    IH_MPUIO_BASE,	METHOD_MPUIO },
 	{ OMAP850_GPIO1_BASE,  INT_850_GPIO_BANK1,  IH_GPIO_BASE,	METHOD_GPIO_850 },
 	{ OMAP850_GPIO2_BASE,  INT_850_GPIO_BANK2,  IH_GPIO_BASE + 32,	METHOD_GPIO_850 },
 	{ OMAP850_GPIO3_BASE,  INT_850_GPIO_BANK3,  IH_GPIO_BASE + 64,	METHOD_GPIO_850 },
diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h
index 2b22a8799bc..633ff688b92 100644
--- a/arch/arm/plat-omap/include/mach/gpio.h
+++ b/arch/arm/plat-omap/include/mach/gpio.h
@@ -29,7 +29,7 @@
 #include <linux/io.h>
 #include <mach/irqs.h>
 
-#define OMAP_MPUIO_BASE			0xfffb5000
+#define OMAP1_MPUIO_BASE			0xfffb5000
 
 #if (defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850))
 
-- 
cgit v1.2.3


From db326be1bca2ddbcac80161953956c8b8bc5b00b Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Fri, 28 Aug 2009 10:50:37 -0700
Subject: OMAP: Remove ifdefs for io.h

Remove ifdefs for io.h

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/io.c             |  6 +++---
 arch/arm/plat-omap/include/mach/io.h | 37 ++++++++++++++++++++++++++++--------
 arch/arm/plat-omap/io.c              |  4 ++--
 3 files changed, 34 insertions(+), 13 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 3afe540149f..7030f9281ea 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -29,9 +29,9 @@ extern void omapfb_reserve_sdram(void);
  */
 static struct map_desc omap_io_desc[] __initdata = {
 	{
-		.virtual	= IO_VIRT,
-		.pfn		= __phys_to_pfn(IO_PHYS),
-		.length		= IO_SIZE,
+		.virtual	= OMAP1_IO_VIRT,
+		.pfn		= __phys_to_pfn(OMAP1_IO_PHYS),
+		.length		= OMAP1_IO_SIZE,
 		.type		= MT_DEVICE
 	}
 };
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index 55659809478..8d32df32b0b 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -66,13 +66,21 @@
 #define OMAP2_IO_OFFSET		0x90000000
 #define OMAP2_IO_ADDRESS(pa)	IOMEM((pa) + OMAP2_IO_OFFSET) /* L3 and L4 */
 
-#if defined(CONFIG_ARCH_OMAP1)
+/*
+ * ----------------------------------------------------------------------------
+ * Omap1 specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
 
-#define IO_PHYS			0xFFFB0000
-#define IO_SIZE			0x40000
-#define IO_VIRT			(IO_PHYS - OMAP1_IO_OFFSET)
+#define OMAP1_IO_PHYS		0xFFFB0000
+#define OMAP1_IO_SIZE		0x40000
+#define OMAP1_IO_VIRT		(OMAP1_IO_PHYS - OMAP1_IO_OFFSET)
 
-#elif defined(CONFIG_ARCH_OMAP2)
+/*
+ * ----------------------------------------------------------------------------
+ * Omap2 specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
 
 /* We map both L3 and L4 on OMAP2 */
 #define L3_24XX_PHYS	L3_24XX_BASE	/* 0x68000000 */
@@ -106,7 +114,11 @@
 #define DSP_MMU_24XX_VIRT	0xe2000000
 #define DSP_MMU_24XX_SIZE	SZ_4K
 
-#elif defined(CONFIG_ARCH_OMAP3)
+/*
+ * ----------------------------------------------------------------------------
+ * Omap3 specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
 
 /* We map both L3 and L4 on OMAP3 */
 #define L3_34XX_PHYS		L3_34XX_BASE	/* 0x68000000 */
@@ -157,8 +169,12 @@
 #define DSP_MMU_34XX_VIRT	0xe2000000
 #define DSP_MMU_34XX_SIZE	SZ_4K
 
+/*
+ * ----------------------------------------------------------------------------
+ * Omap4 specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
 
-#elif defined(CONFIG_ARCH_OMAP4)
 /* We map both L3 and L4 on OMAP4 */
 #define L3_44XX_PHYS		L3_44XX_BASE
 #define L3_44XX_VIRT		0xd4000000
@@ -185,7 +201,12 @@
 #define OMAP44XX_GPMC_VIRT	0xe0000000
 #define OMAP44XX_GPMC_SIZE	SZ_1M
 
-#endif
+
+/*
+ * ----------------------------------------------------------------------------
+ * Omap specific register access
+ * ----------------------------------------------------------------------------
+ */
 
 #ifndef __ASSEMBLER__
 
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
index d491ad15f19..b6defa23e77 100644
--- a/arch/arm/plat-omap/io.c
+++ b/arch/arm/plat-omap/io.c
@@ -30,8 +30,8 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
 {
 #ifdef CONFIG_ARCH_OMAP1
 	if (cpu_class_is_omap1()) {
-		if (BETWEEN(p, IO_PHYS, IO_SIZE))
-			return XLATE(p, IO_PHYS, IO_VIRT);
+		if (BETWEEN(p, OMAP1_IO_PHYS, OMAP1_IO_SIZE))
+			return XLATE(p, OMAP1_IO_PHYS, OMAP1_IO_VIRT);
 	}
 	if (cpu_is_omap730()) {
 		if (BETWEEN(p, OMAP730_DSP_BASE, OMAP730_DSP_SIZE))
-- 
cgit v1.2.3


From 987cadcf3ccf9e5bde7a31d9be392f9de5f88833 Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@iki.fi>
Date: Fri, 28 Aug 2009 10:51:29 -0700
Subject: OMAP: remove OMAP_TAG_SERIAL_CONSOLE

Omap tags are deprecated and remove OMAP_TAG_SERIAL_CONSOLE. Console must be
enabled with the console boot parameter instead.

Signed-off-by: Kalle Valo <kalle.valo@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/common.c             | 44 ---------------------------------
 arch/arm/plat-omap/include/mach/board.h |  1 -
 2 files changed, 45 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index ebcf006406f..f37a29acc36 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -127,50 +127,6 @@ const void *omap_get_var_config(u16 tag, size_t *len)
 }
 EXPORT_SYMBOL(omap_get_var_config);
 
-static int __init omap_add_serial_console(void)
-{
-	const struct omap_serial_console_config *con_info;
-	const struct omap_uart_config *uart_info;
-	static char speed[11], *opt = NULL;
-	int line, i, uart_idx;
-
-	uart_info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
-	con_info = omap_get_config(OMAP_TAG_SERIAL_CONSOLE,
-					struct omap_serial_console_config);
-	if (uart_info == NULL || con_info == NULL)
-		return 0;
-
-	if (con_info->console_uart == 0)
-		return 0;
-
-	if (con_info->console_speed) {
-		snprintf(speed, sizeof(speed), "%u", con_info->console_speed);
-		opt = speed;
-	}
-
-	uart_idx = con_info->console_uart - 1;
-	if (uart_idx >= OMAP_MAX_NR_PORTS) {
-		printk(KERN_INFO "Console: external UART#%d. "
-			"Not adding it as console this time.\n",
-			uart_idx + 1);
-		return 0;
-	}
-	if (!(uart_info->enabled_uarts & (1 << uart_idx))) {
-		printk(KERN_ERR "Console: Selected UART#%d is "
-			"not enabled for this platform\n",
-			uart_idx + 1);
-		return -1;
-	}
-	line = 0;
-	for (i = 0; i < uart_idx; i++) {
-		if (uart_info->enabled_uarts & (1 << i))
-			line++;
-	}
-	return add_preferred_console("ttyS", line, opt);
-}
-console_initcall(omap_add_serial_console);
-
-
 /*
  * 32KHz clocksource ... always available, on pretty most chips except
  * OMAP 730 and 1510.  Other timers could be used as clocksources, with
diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/mach/board.h
index 50ea79a0efa..0d125868b62 100644
--- a/arch/arm/plat-omap/include/mach/board.h
+++ b/arch/arm/plat-omap/include/mach/board.h
@@ -16,7 +16,6 @@
 
 /* Different peripheral ids */
 #define OMAP_TAG_CLOCK		0x4f01
-#define OMAP_TAG_SERIAL_CONSOLE 0x4f03
 #define OMAP_TAG_LCD		0x4f05
 #define OMAP_TAG_GPIO_SWITCH	0x4f06
 #define OMAP_TAG_UART		0x4f07
-- 
cgit v1.2.3


From 15ac408ee5a509053a765b816e9179515329369f Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@iki.fi>
Date: Fri, 28 Aug 2009 10:51:31 -0700
Subject: OMAP: UART: drop OMAP_TAG_UART, enable all UARTs, auto-disabled on
 idle

OMAP tags are deprecrated so drop them.

Drop UART config data which decides which UARTs to enable during boot.
This is no longer necessary since serial core code disables clocks
after inactivity.

Background: with new UART idle code, all on-chip UARTs are idled using
a configurable inactivity timer (default 5 seconds.)  After the
inactivity timer, UART clocks are disabled automatically.

Signed-off-by: Kalle Valo <kalle.valo@iki.fi>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/board-ams-delta.c    |  5 -----
 arch/arm/mach-omap1/board-fsample.c      |  5 -----
 arch/arm/mach-omap1/board-generic.c      |  5 -----
 arch/arm/mach-omap1/board-h2.c           |  5 -----
 arch/arm/mach-omap1/board-h3.c           |  5 -----
 arch/arm/mach-omap1/board-innovator.c    |  5 -----
 arch/arm/mach-omap1/board-osk.c          |  5 -----
 arch/arm/mach-omap1/board-palmte.c       |  5 -----
 arch/arm/mach-omap1/board-palmtt.c       |  5 -----
 arch/arm/mach-omap1/board-palmz71.c      |  5 -----
 arch/arm/mach-omap1/board-perseus2.c     |  5 -----
 arch/arm/mach-omap1/board-sx1.c          |  5 -----
 arch/arm/mach-omap1/board-voiceblue.c    |  5 -----
 arch/arm/mach-omap1/serial.c             | 11 -----------
 arch/arm/mach-omap2/board-2430sdp.c      |  5 -----
 arch/arm/mach-omap2/board-3430sdp.c      |  5 -----
 arch/arm/mach-omap2/board-4430sdp.c      |  1 -
 arch/arm/mach-omap2/board-apollon.c      |  5 -----
 arch/arm/mach-omap2/board-generic.c      |  5 -----
 arch/arm/mach-omap2/board-h4.c           |  5 -----
 arch/arm/mach-omap2/board-ldp.c          |  5 -----
 arch/arm/mach-omap2/board-omap3beagle.c  |  5 -----
 arch/arm/mach-omap2/board-omap3evm.c     |  5 -----
 arch/arm/mach-omap2/board-omap3pandora.c |  5 -----
 arch/arm/mach-omap2/board-overo.c        |  4 ----
 arch/arm/mach-omap2/board-rx51.c         |  5 -----
 arch/arm/mach-omap2/board-zoom2.c        |  5 -----
 arch/arm/mach-omap2/serial.c             | 12 ------------
 arch/arm/plat-omap/include/mach/board.h  |  1 -
 29 files changed, 149 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 8b40aace9db..580773202ea 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -162,10 +162,6 @@ static struct omap_lcd_config ams_delta_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
-static struct omap_uart_config ams_delta_uart_config __initdata = {
-	.enabled_uarts = 1,
-};
-
 static struct omap_usb_config ams_delta_usb_config __initdata = {
 	.register_host	= 1,
 	.hmc_mode	= 16,
@@ -174,7 +170,6 @@ static struct omap_usb_config ams_delta_usb_config __initdata = {
 
 static struct omap_board_config_kernel ams_delta_config[] = {
 	{ OMAP_TAG_LCD,		&ams_delta_lcd_config },
-	{ OMAP_TAG_UART,	&ams_delta_uart_config },
 };
 
 static struct resource ams_delta_kp_resources[] = {
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 19e0e923233..a7ead1b9322 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -240,16 +240,11 @@ static int nand_dev_ready(struct omap_nand_platform_data *data)
 	return gpio_get_value(P2_NAND_RB_GPIO_PIN);
 }
 
-static struct omap_uart_config fsample_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1)),
-};
-
 static struct omap_lcd_config fsample_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
 static struct omap_board_config_kernel fsample_config[] = {
-	{ OMAP_TAG_UART,	&fsample_uart_config },
 	{ OMAP_TAG_LCD,		&fsample_lcd_config },
 };
 
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index e724940e86f..fb47239da72 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -57,12 +57,7 @@ static struct omap_usb_config generic1610_usb_config __initdata = {
 };
 #endif
 
-static struct omap_uart_config generic_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_board_config_kernel generic_config[] __initdata = {
-	{ OMAP_TAG_UART,	&generic_uart_config },
 };
 
 static void __init omap_generic_init(void)
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index f695aa053ac..aab860307dc 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -360,16 +360,11 @@ static struct omap_usb_config h2_usb_config __initdata = {
 	.pins[1]	= 3,
 };
 
-static struct omap_uart_config h2_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_lcd_config h2_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
 static struct omap_board_config_kernel h2_config[] __initdata = {
-	{ OMAP_TAG_UART,	&h2_uart_config },
 	{ OMAP_TAG_LCD,		&h2_lcd_config },
 };
 
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index f597968733b..89586b80b8d 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -313,16 +313,11 @@ static struct omap_usb_config h3_usb_config __initdata = {
 	.pins[1]	= 3,
 };
 
-static struct omap_uart_config h3_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_lcd_config h3_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
 static struct omap_board_config_kernel h3_config[] __initdata = {
-	{ OMAP_TAG_UART,	&h3_uart_config },
 	{ OMAP_TAG_LCD,		&h3_lcd_config },
 };
 
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 2fd98260ea4..cc2abbb2d0f 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -368,13 +368,8 @@ static inline void innovator_mmc_init(void)
 }
 #endif
 
-static struct omap_uart_config innovator_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_board_config_kernel innovator_config[] = {
 	{ OMAP_TAG_LCD,		NULL },
-	{ OMAP_TAG_UART,	&innovator_uart_config },
 };
 
 static void __init innovator_init(void)
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index cf3247b15f8..ed891b8a6b1 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -293,10 +293,6 @@ static struct omap_usb_config osk_usb_config __initdata = {
 	.pins[0]	= 2,
 };
 
-static struct omap_uart_config osk_uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
 #ifdef	CONFIG_OMAP_OSK_MISTRAL
 static struct omap_lcd_config osk_lcd_config __initdata = {
 	.ctrl_name	= "internal",
@@ -304,7 +300,6 @@ static struct omap_lcd_config osk_lcd_config __initdata = {
 #endif
 
 static struct omap_board_config_kernel osk_config[] __initdata = {
-	{ OMAP_TAG_UART,		&osk_uart_config },
 #ifdef	CONFIG_OMAP_OSK_MISTRAL
 	{ OMAP_TAG_LCD,			&osk_lcd_config },
 #endif
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 886b4c0569b..90dd0431b0d 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -212,10 +212,6 @@ static struct omap_lcd_config palmte_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
-static struct omap_uart_config palmte_uart_config __initdata = {
-	.enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
-};
-
 #ifdef CONFIG_APM
 /*
  * Values measured in 10 minute intervals averaged over 10 samples.
@@ -302,7 +298,6 @@ static void palmte_get_power_status(struct apm_power_info *info, int *battery)
 
 static struct omap_board_config_kernel palmte_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&palmte_lcd_config },
-	{ OMAP_TAG_UART,	&palmte_uart_config },
 };
 
 static struct spi_board_info palmte_spi_info[] __initdata = {
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 4f1b44831d3..8256139891f 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -274,13 +274,8 @@ static struct omap_lcd_config palmtt_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
-static struct omap_uart_config palmtt_uart_config __initdata = {
-	.enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
-};
-
 static struct omap_board_config_kernel palmtt_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&palmtt_lcd_config	},
-	{ OMAP_TAG_UART,	&palmtt_uart_config	},
 };
 
 static void __init omap_mpu_wdt_mode(int mode) {
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 9a55c3c5821..81b6bde1c5a 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -244,13 +244,8 @@ static struct omap_lcd_config palmz71_lcd_config __initdata = {
 	.ctrl_name = "internal",
 };
 
-static struct omap_uart_config palmz71_uart_config __initdata = {
-	.enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
-};
-
 static struct omap_board_config_kernel palmz71_config[] __initdata = {
 	{OMAP_TAG_LCD,	&palmz71_lcd_config},
-	{OMAP_TAG_UART,	&palmz71_uart_config},
 };
 
 static irqreturn_t
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 3b9f907aa89..83406699f31 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -208,16 +208,11 @@ static int nand_dev_ready(struct omap_nand_platform_data *data)
 	return gpio_get_value(P2_NAND_RB_GPIO_PIN);
 }
 
-static struct omap_uart_config perseus2_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1)),
-};
-
 static struct omap_lcd_config perseus2_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
 static struct omap_board_config_kernel perseus2_config[] __initdata = {
-	{ OMAP_TAG_UART,	&perseus2_uart_config },
 	{ OMAP_TAG_LCD,		&perseus2_lcd_config },
 };
 
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index c096577695f..02c85ca2e1d 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -369,13 +369,8 @@ static struct platform_device *sx1_devices[] __initdata = {
 };
 /*-----------------------------------------*/
 
-static struct omap_uart_config sx1_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_board_config_kernel sx1_config[] __initdata = {
 	{ OMAP_TAG_LCD,	&sx1_lcd_config },
-	{ OMAP_TAG_UART,	&sx1_uart_config },
 };
 
 /*-----------------------------------------*/
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 98275e03dad..c06e7a55347 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -140,12 +140,7 @@ static struct omap_usb_config voiceblue_usb_config __initdata = {
 	.pins[2]	= 6,
 };
 
-static struct omap_uart_config voiceblue_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_board_config_kernel voiceblue_config[] = {
-	{ OMAP_TAG_UART, &voiceblue_uart_config },
 };
 
 static void __init voiceblue_init_irq(void)
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 6f54b2c591c..d496e50fec4 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -109,7 +109,6 @@ static struct platform_device serial_device = {
 void __init omap_serial_init(void)
 {
 	int i;
-	const struct omap_uart_config *info;
 
 	if (cpu_is_omap730()) {
 		serial_platform_data[0].regshift = 0;
@@ -131,19 +130,9 @@ void __init omap_serial_init(void)
 		serial_platform_data[2].uartclk = OMAP1510_BASE_BAUD * 16;
 	}
 
-	info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
-	if (info == NULL)
-		return;
-
 	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
 		unsigned char reg;
 
-		if (!((1 << i) & info->enabled_uarts)) {
-			serial_platform_data[i].membase = NULL;
-			serial_platform_data[i].mapbase = 0;
-			continue;
-		}
-
 		switch (i) {
 		case 0:
 			uart1_ck = clk_get(NULL, "uart1_ck");
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 8ec2a132904..7f5a74d5924 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -146,12 +146,7 @@ static void __init omap_2430sdp_init_irq(void)
 	omap_gpio_init();
 }
 
-static struct omap_uart_config sdp2430_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_board_config_kernel sdp2430_config[] = {
-	{OMAP_TAG_UART, &sdp2430_uart_config},
 	{OMAP_TAG_LCD, &sdp2430_lcd_config},
 };
 
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index ac262cd7450..7e9b76cc767 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -174,16 +174,11 @@ static void __init omap_3430sdp_init_irq(void)
 	omap_gpio_init();
 }
 
-static struct omap_uart_config sdp3430_uart_config __initdata = {
-	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_lcd_config sdp3430_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
 static struct omap_board_config_kernel sdp3430_config[] __initdata = {
-	{ OMAP_TAG_UART,	&sdp3430_uart_config },
 	{ OMAP_TAG_LCD,		&sdp3430_lcd_config },
 };
 
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index bdfda36d8aa..f22f429c88f 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -47,7 +47,6 @@ static struct omap_lcd_config sdp4430_lcd_config __initdata = {
 };
 
 static struct omap_board_config_kernel sdp4430_config[] __initdata = {
-	{ OMAP_TAG_UART,	&sdp4430_uart_config },
 	{ OMAP_TAG_LCD,		&sdp4430_lcd_config },
 };
 
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index dcfc20d0389..615f21d1eb2 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -256,10 +256,6 @@ static void __init omap_apollon_init_irq(void)
 	apollon_init_smc91x();
 }
 
-static struct omap_uart_config apollon_uart_config __initdata = {
-	.enabled_uarts = (1 << 0) | (0 << 1) | (0 << 2),
-};
-
 static struct omap_usb_config apollon_usb_config __initdata = {
 	.register_dev	= 1,
 	.hmc_mode	= 0x14,	/* 0:dev 1:host1 2:disable */
@@ -272,7 +268,6 @@ static struct omap_lcd_config apollon_lcd_config __initdata = {
 };
 
 static struct omap_board_config_kernel apollon_config[] = {
-	{ OMAP_TAG_UART,	&apollon_uart_config },
 	{ OMAP_TAG_LCD,		&apollon_lcd_config },
 };
 
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index fd00aa03690..3e401c5b6e4 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -37,12 +37,7 @@ static void __init omap_generic_init_irq(void)
 	omap_init_irq();
 }
 
-static struct omap_uart_config generic_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_board_config_kernel generic_config[] = {
-	{ OMAP_TAG_UART,	&generic_uart_config },
 };
 
 static void __init omap_generic_init(void)
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 7b1d61d5bb2..b6501d241c1 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -276,10 +276,6 @@ static void __init omap_h4_init_irq(void)
 	h4_init_flash();
 }
 
-static struct omap_uart_config h4_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_lcd_config h4_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
@@ -318,7 +314,6 @@ static struct omap_usb_config h4_usb_config __initdata = {
 };
 
 static struct omap_board_config_kernel h4_config[] = {
-	{ OMAP_TAG_UART,	&h4_uart_config },
 	{ OMAP_TAG_LCD,		&h4_lcd_config },
 };
 
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index ea383f88cb1..2dd6806a1e8 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -276,10 +276,6 @@ static void __init omap_ldp_init_irq(void)
 	ldp_init_smsc911x();
 }
 
-static struct omap_uart_config ldp_uart_config __initdata = {
-	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct platform_device ldp_lcd_device = {
 	.name		= "ldp_lcd",
 	.id		= -1,
@@ -290,7 +286,6 @@ static struct omap_lcd_config ldp_lcd_config __initdata = {
 };
 
 static struct omap_board_config_kernel ldp_config[] __initdata = {
-	{ OMAP_TAG_UART,	&ldp_uart_config },
 	{ OMAP_TAG_LCD,		&ldp_lcd_config },
 };
 
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index e00ba128cec..201360781ac 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -108,10 +108,6 @@ static struct platform_device omap3beagle_nand_device = {
 
 #include "sdram-micron-mt46h32m32lf-6.h"
 
-static struct omap_uart_config omap3_beagle_uart_config __initdata = {
-	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct twl4030_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
@@ -345,7 +341,6 @@ static struct platform_device keys_gpio = {
 };
 
 static struct omap_board_config_kernel omap3_beagle_config[] __initdata = {
-	{ OMAP_TAG_UART,	&omap3_beagle_uart_config },
 	{ OMAP_TAG_LCD,		&omap3_beagle_lcd_config },
 };
 
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index c4b144647dc..3e0435371ce 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -92,10 +92,6 @@ static inline void __init omap3evm_init_smc911x(void)
 	gpio_direction_input(OMAP3EVM_ETHR_GPIO_IRQ);
 }
 
-static struct omap_uart_config omap3_evm_uart_config __initdata = {
-	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct twl4030_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
@@ -287,7 +283,6 @@ static void __init omap3_evm_init_irq(void)
 }
 
 static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
-	{ OMAP_TAG_UART,	&omap3_evm_uart_config },
 	{ OMAP_TAG_LCD,		&omap3_evm_lcd_config },
 };
 
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 864ee3d021f..8236708c362 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -213,10 +213,6 @@ static struct twl4030_hsmmc_info omap3pandora_mmc[] = {
 	{}	/* Terminator */
 };
 
-static struct omap_uart_config omap3pandora_uart_config __initdata = {
-	.enabled_uarts	= (1 << 2), /* UART3 */
-};
-
 static struct regulator_consumer_supply pandora_vmmc1_supply = {
 	.supply			= "vmmc",
 };
@@ -376,7 +372,6 @@ static struct omap_lcd_config omap3pandora_lcd_config __initdata = {
 };
 
 static struct omap_board_config_kernel omap3pandora_config[] __initdata = {
-	{ OMAP_TAG_UART,	&omap3pandora_uart_config },
 	{ OMAP_TAG_LCD,		&omap3pandora_lcd_config },
 };
 
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 6bce23004aa..eb78e6eab4f 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -271,9 +271,6 @@ static void __init overo_flash_init(void)
 			printk(KERN_ERR "Unable to register NAND device\n");
 	}
 }
-static struct omap_uart_config overo_uart_config __initdata = {
-	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
-};
 
 static struct twl4030_hsmmc_info mmc[] = {
 	{
@@ -378,7 +375,6 @@ static struct omap_lcd_config overo_lcd_config __initdata = {
 };
 
 static struct omap_board_config_kernel overo_config[] __initdata = {
-	{ OMAP_TAG_UART,	&overo_uart_config },
 	{ OMAP_TAG_LCD,		&overo_lcd_config },
 };
 
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 1c9e07fe826..c0d13401425 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -31,10 +31,6 @@
 #include <mach/gpmc.h>
 #include <mach/usb.h>
 
-static struct omap_uart_config rx51_uart_config = {
-	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_lcd_config rx51_lcd_config = {
 	.ctrl_name	= "internal",
 };
@@ -52,7 +48,6 @@ static struct omap_fbmem_config rx51_fbmem2_config = {
 };
 
 static struct omap_board_config_kernel rx51_config[] = {
-	{ OMAP_TAG_UART,	&rx51_uart_config },
 	{ OMAP_TAG_FBMEM,	&rx51_fbmem0_config },
 	{ OMAP_TAG_FBMEM,	&rx51_fbmem1_config },
 	{ OMAP_TAG_FBMEM,	&rx51_fbmem2_config },
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index 427b7b8b123..3a42eca1ad8 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -30,12 +30,7 @@ static void __init omap_zoom2_init_irq(void)
 	omap_gpio_init();
 }
 
-static struct omap_uart_config zoom2_uart_config __initdata = {
-	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_board_config_kernel zoom2_config[] __initdata = {
-	{ OMAP_TAG_UART,	&zoom2_uart_config },
 };
 
 static struct twl4030_gpio_platform_data zoom2_gpio_data = {
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 42449002f60..409b03309af 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -555,7 +555,6 @@ static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = {
 void __init omap_serial_init(void)
 {
 	int i;
-	const struct omap_uart_config *info;
 	char name[16];
 
 	/*
@@ -564,23 +563,12 @@ void __init omap_serial_init(void)
 	 * if not needed.
 	 */
 
-	info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
-
-	if (info == NULL)
-		return;
-
 	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
 		struct omap_uart_state *uart = &omap_uart[i];
 		struct platform_device *pdev = &uart->pdev;
 		struct device *dev = &pdev->dev;
 		struct plat_serial8250_port *p = dev->platform_data;
 
-		if (!(info->enabled_uarts & (1 << i))) {
-			p->membase = NULL;
-			p->mapbase = 0;
-			continue;
-		}
-
 		sprintf(name, "uart%d_ick", i+1);
 		uart->ick = clk_get(NULL, name);
 		if (IS_ERR(uart->ick)) {
diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/mach/board.h
index 0d125868b62..8e913c32281 100644
--- a/arch/arm/plat-omap/include/mach/board.h
+++ b/arch/arm/plat-omap/include/mach/board.h
@@ -18,7 +18,6 @@
 #define OMAP_TAG_CLOCK		0x4f01
 #define OMAP_TAG_LCD		0x4f05
 #define OMAP_TAG_GPIO_SWITCH	0x4f06
-#define OMAP_TAG_UART		0x4f07
 #define OMAP_TAG_FBMEM		0x4f08
 #define OMAP_TAG_STI_CONSOLE	0x4f09
 #define OMAP_TAG_CAMERA_SENSOR	0x4f0a
-- 
cgit v1.2.3


From 79e44c952cec025295b3f0fd0ff2a875689b98c4 Mon Sep 17 00:00:00 2001
From: Roger Quadros <ext-roger.quadros@nokia.com>
Date: Fri, 28 Aug 2009 10:51:35 -0700
Subject: OMAP: Remove omap boot parsing code

Remove left over code for parsing omap boot tags. This is
no longer used.
see commit fc0ef1bfa1353e048e055374a09c75320d22231b

Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/common.c | 44 --------------------------------------------
 1 file changed, 44 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index f37a29acc36..a6fa786019c 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -54,50 +54,6 @@ static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out)
 	struct omap_board_config_kernel *kinfo = NULL;
 	int i;
 
-#ifdef CONFIG_OMAP_BOOT_TAG
-	struct omap_board_config_entry *info = NULL;
-
-	if (omap_bootloader_tag_len > 4)
-		info = (struct omap_board_config_entry *) omap_bootloader_tag;
-	while (info != NULL) {
-		u8 *next;
-
-		if (info->tag == tag) {
-			if (skip == 0)
-				break;
-			skip--;
-		}
-
-		if ((info->len & 0x03) != 0) {
-			/* We bail out to avoid an alignment fault */
-			printk(KERN_ERR "OMAP peripheral config: Length (%d) not word-aligned (tag %04x)\n",
-			       info->len, info->tag);
-			return NULL;
-		}
-		next = (u8 *) info + sizeof(*info) + info->len;
-		if (next >= omap_bootloader_tag + omap_bootloader_tag_len)
-			info = NULL;
-		else
-			info = (struct omap_board_config_entry *) next;
-	}
-	if (info != NULL) {
-		/* Check the length as a lame attempt to check for
-		 * binary inconsistency. */
-		if (len != NO_LENGTH_CHECK) {
-			/* Word-align len */
-			if (len & 0x03)
-				len = (len + 3) & ~0x03;
-			if (info->len != len) {
-				printk(KERN_ERR "OMAP peripheral config: Length mismatch with tag %x (want %d, got %d)\n",
-				       tag, len, info->len);
-				return NULL;
-			}
-		}
-		if (len_out != NULL)
-			*len_out = info->len;
-		return info->data;
-	}
-#endif
 	/* Try to find the config from the board-specific structures
 	 * in the kernel. */
 	for (i = 0; i < omap_board_config_size; i++) {
-- 
cgit v1.2.3


From 82dbb9d39f58e3d12b5903764901df5fec759daf Mon Sep 17 00:00:00 2001
From: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Date: Fri, 28 Aug 2009 10:51:36 -0700
Subject: OMAP: GPIO: Avoid generating extra IRQs

It is possible for GPIO IRQ lines configured with
falling edge triggering only to get IRQs at the
rising edge upon the exit of offmode. And vice
versa. Prevent such IRQs to arrive by generating
the IRQ obeying the detection scheme.

Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/gpio.c | 27 +++++++++++++++++++++++----
 1 file changed, 23 insertions(+), 4 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index b55b4adffbe..7c70a6afcf6 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -1895,7 +1895,7 @@ void omap2_gpio_resume_after_retention(void)
 		return;
 	for (i = 0; i < gpio_bank_count; i++) {
 		struct gpio_bank *bank = &gpio_bank[i];
-		u32 l;
+		u32 l, gen, gen0, gen1;
 
 		if (!(bank->enabled_non_wakeup_gpios))
 			continue;
@@ -1916,14 +1916,33 @@ void omap2_gpio_resume_after_retention(void)
 #endif
 		l ^= bank->saved_datain;
 		l &= bank->non_wakeup_gpios;
-		if (l) {
+
+		/*
+		 * No need to generate IRQs for the rising edge for gpio IRQs
+		 * configured with falling edge only; and vice versa.
+		 */
+		gen0 = l & bank->saved_fallingdetect;
+		gen0 &= bank->saved_datain;
+
+		gen1 = l & bank->saved_risingdetect;
+		gen1 &= ~(bank->saved_datain);
+
+		/* FIXME: Consider GPIO IRQs with level detections properly! */
+		gen = l & (~(bank->saved_fallingdetect) &
+				~(bank->saved_risingdetect));
+		/* Consider all GPIO IRQs needed to be updated */
+		gen |= gen0 | gen1;
+
+		if (gen) {
 			u32 old0, old1;
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
 			defined(CONFIG_ARCH_OMAP4)
 			old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
 			old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
-			__raw_writel(old0 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
-			__raw_writel(old1 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+			__raw_writel(old0 | gen, bank->base +
+					OMAP24XX_GPIO_LEVELDETECT0);
+			__raw_writel(old1 | gen, bank->base +
+					OMAP24XX_GPIO_LEVELDETECT1);
 			__raw_writel(old0, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
 			__raw_writel(old1, bank->base + OMAP24XX_GPIO_LEVELDETECT1);
 #endif
-- 
cgit v1.2.3


From eff443df679ea7e553830db992e2f02707ddbb47 Mon Sep 17 00:00:00 2001
From: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Date: Fri, 28 Aug 2009 10:51:37 -0700
Subject: OMAP1: AMS_DELTA: add modem support

This patch adds support for modem device found on Amstrad E3 (Delta) board.

Based on earlier patch by Jonathan McDowell, available at
http://the.earth.li/pub/e3/2.6.19/ams-delta-modem.patch.
Modified after Ladislav Michl's arch/arm/mach-omap1/board-voiceblue.c.

This patch is dependent on 8250 driver changes getting accepted upstream:
http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git;a=commit;h=7053133124d5cdf207c1168c7a0c582a18e12ea7

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/board-ams-delta.c | 38 +++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 580773202ea..42920f9c1a1 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -15,8 +15,11 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/input.h>
+#include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/serial_8250.h>
 
+#include <asm/serial.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -230,6 +233,41 @@ static void __init ams_delta_init(void)
 	platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
 }
 
+static struct plat_serial8250_port ams_delta_modem_ports[] = {
+	{
+		.membase	= (void *) AMS_DELTA_MODEM_VIRT,
+		.mapbase	= AMS_DELTA_MODEM_PHYS,
+		.irq		= -EINVAL, /* changed later */
+		.flags		= UPF_BOOT_AUTOCONF,
+		.irqflags	= IRQF_TRIGGER_RISING,
+		.iotype		= UPIO_MEM,
+		.regshift	= 1,
+		.uartclk	= BASE_BAUD * 16,
+	},
+	{ },
+};
+
+static struct platform_device ams_delta_modem_device = {
+	.name	= "serial8250",
+	.id	= PLAT8250_DEV_PLATFORM1,
+	.dev		= {
+		.platform_data = ams_delta_modem_ports,
+	},
+};
+
+static int __init ams_delta_modem_init(void)
+{
+	omap_cfg_reg(M14_1510_GPIO2);
+	ams_delta_modem_ports[0].irq = gpio_to_irq(2);
+
+	ams_delta_latch2_write(
+		AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC,
+		AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC);
+
+	return platform_device_register(&ams_delta_modem_device);
+}
+arch_initcall(ams_delta_modem_init);
+
 static void __init ams_delta_map_io(void)
 {
 	omap1_map_common_io();
-- 
cgit v1.2.3


From 1b52d5df64bea12bed82dbc1c736638e77d1ce80 Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@iki.fi>
Date: Fri, 28 Aug 2009 10:51:37 -0700
Subject: OMAP2: compile usb-tusb6010.c

For some reason usb-tusb6010.c was't compiled, add it to Makefile and
Kconfig. This is prepraration for upcoming n8x0 support.

Signed-off-by: Kalle Valo <kalle.valo@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/Kconfig  | 5 +++++
 arch/arm/mach-omap2/Makefile | 1 +
 2 files changed, 6 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index a755eb5e236..bf54686c8b7 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -31,6 +31,11 @@ config MACH_OMAP_GENERIC
 	bool "Generic OMAP board"
 	depends on ARCH_OMAP2 && ARCH_OMAP24XX
 
+config MACH_OMAP2_TUSB6010
+	bool
+	depends on ARCH_OMAP2 && ARCH_OMAP2420
+	default y if MACH_NOKIA_N8X0
+
 config MACH_OMAP_H4
 	bool "OMAP 2420 H4 board"
 	depends on ARCH_OMAP2 && ARCH_OMAP24XX
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 735bae5b0de..757c84b8eef 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -74,6 +74,7 @@ obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o
 
 # Platform specific device init code
 obj-y					+= usb-musb.o
+obj-$(CONFIG_MACH_OMAP2_TUSB6010)	+= usb-tusb6010.o
 
 onenand-$(CONFIG_MTD_ONENAND_OMAP2)	:= gpmc-onenand.o
 obj-y					+= $(onenand-m) $(onenand-y)
-- 
cgit v1.2.3


From 6313881292c238190bc119404ae13f65c61b2daa Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@iki.fi>
Date: Fri, 28 Aug 2009 10:51:38 -0700
Subject: OMAP2: add board file for Nokia N800 and N810

Add board file for Nokia N800 and N810 devices. Currently only serial ports,
onenand and spi are configured, more to come later.

Tested on Nokia N800.

Signed-off-by: Kalle Valo <kalle.valo@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/Kconfig      |   4 ++
 arch/arm/mach-omap2/Makefile     |   2 +-
 arch/arm/mach-omap2/board-n8x0.c | 150 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 155 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-omap2/board-n8x0.c

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index bf54686c8b7..75b1c7efae7 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -73,6 +73,10 @@ config MACH_OMAP_3430SDP
 	bool "OMAP 3430 SDP board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
 
+config MACH_NOKIA_N8X0
+	bool "Nokia N800/N810"
+	depends on ARCH_OMAP2420
+
 config MACH_NOKIA_RX51
 	bool "Nokia RX-51 board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 757c84b8eef..8850a247bec 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -62,7 +62,7 @@ obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o \
 					   mmc-twl4030.o
 obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \
 					   mmc-twl4030.o
-
+obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
 					   board-rx51-peripherals.o \
 					   mmc-twl4030.o
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
new file mode 100644
index 00000000000..8341632d260
--- /dev/null
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -0,0 +1,150 @@
+/*
+ * linux/arch/arm/mach-omap2/board-n8x0.c
+ *
+ * Copyright (C) 2005-2009 Nokia Corporation
+ * Author: Juha Yrjola <juha.yrjola@nokia.com>
+ *
+ * Modified from mach-omap2/board-generic.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/stddef.h>
+#include <linux/spi/spi.h>
+#include <linux/usb/musb.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/irqs.h>
+#include <mach/mcspi.h>
+#include <mach/onenand.h>
+#include <mach/serial.h>
+
+static struct omap2_mcspi_device_config p54spi_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel = 1,
+};
+
+static struct spi_board_info n800_spi_board_info[] __initdata = {
+	{
+		.modalias	= "p54spi",
+		.bus_num	= 2,
+		.chip_select	= 0,
+		.max_speed_hz   = 48000000,
+		.controller_data = &p54spi_mcspi_config,
+	},
+};
+
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+
+static struct mtd_partition onenand_partitions[] = {
+	{
+		.name           = "bootloader",
+		.offset         = 0,
+		.size           = 0x20000,
+		.mask_flags     = MTD_WRITEABLE,	/* Force read-only */
+	},
+	{
+		.name           = "config",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 0x60000,
+	},
+	{
+		.name           = "kernel",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 0x200000,
+	},
+	{
+		.name           = "initfs",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 0x400000,
+	},
+	{
+		.name           = "rootfs",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct omap_onenand_platform_data board_onenand_data = {
+	.cs		= 0,
+	.gpio_irq	= 26,
+	.parts		= onenand_partitions,
+	.nr_parts	= ARRAY_SIZE(onenand_partitions),
+	.flags		= ONENAND_SYNC_READ,
+};
+
+static void __init n8x0_onenand_init(void)
+{
+	gpmc_onenand_init(&board_onenand_data);
+}
+
+#else
+
+static void __init n8x0_onenand_init(void) {}
+
+#endif
+
+static void __init n8x0_map_io(void)
+{
+	omap2_set_globals_242x();
+	omap2_map_common_io();
+}
+
+static void __init n8x0_init_irq(void)
+{
+	omap2_init_common_hw(NULL, NULL);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+static void __init n8x0_init_machine(void)
+{
+	/* FIXME: add n810 spi devices */
+	spi_register_board_info(n800_spi_board_info,
+				ARRAY_SIZE(n800_spi_board_info));
+
+	omap_serial_init();
+	n8x0_onenand_init();
+}
+
+MACHINE_START(NOKIA_N800, "Nokia N800")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= n8x0_map_io,
+	.init_irq	= n8x0_init_irq,
+	.init_machine	= n8x0_init_machine,
+	.timer		= &omap_timer,
+MACHINE_END
+
+MACHINE_START(NOKIA_N810, "Nokia N810")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= n8x0_map_io,
+	.init_irq	= n8x0_init_irq,
+	.init_machine	= n8x0_init_machine,
+	.timer		= &omap_timer,
+MACHINE_END
+
+MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= n8x0_map_io,
+	.init_irq	= n8x0_init_irq,
+	.init_machine	= n8x0_init_machine,
+	.timer		= &omap_timer,
+MACHINE_END
-- 
cgit v1.2.3


From af933f4729f2cc25306f1a514d55c248da480d66 Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@iki.fi>
Date: Fri, 28 Aug 2009 10:51:38 -0700
Subject: OMAP2: n8x0: add n8x0_defconfig

Add defconfig file for OMAP2 N800 and N810 devices.

Signed-off-by: Kalle Valo <kalle.valo@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/configs/n8x0_defconfig | 1104 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 1104 insertions(+)
 create mode 100644 arch/arm/configs/n8x0_defconfig

(limited to 'arch/arm')

diff --git a/arch/arm/configs/n8x0_defconfig b/arch/arm/configs/n8x0_defconfig
new file mode 100644
index 00000000000..8da75dede52
--- /dev/null
+++ b/arch/arm/configs/n8x0_defconfig
@@ -0,0 +1,1104 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc5
+# Thu Aug  6 22:17:23 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_CLASSIC_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2=y
+# CONFIG_ARCH_OMAP3 is not set
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+# CONFIG_OMAP_MUX is not set
+# CONFIG_OMAP_MCBSP is not set
+CONFIG_OMAP_MBOX_FWK=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP Core Type
+#
+CONFIG_ARCH_OMAP24XX=y
+CONFIG_ARCH_OMAP2420=y
+# CONFIG_ARCH_OMAP2430 is not set
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP2_TUSB6010=y
+# CONFIG_MACH_OMAP_H4 is not set
+# CONFIG_MACH_OMAP_APOLLON is not set
+# CONFIG_MACH_OMAP_2430SDP is not set
+CONFIG_MACH_NOKIA_N8X0=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_ARM_ERRATA_411920 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_LEDS=y
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x10C08000
+CONFIG_ZBOOT_ROM_BSS=0x10200000
+# CONFIG_ZBOOT_ROM is not set
+CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS0,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_CHAR is not set
+CONFIG_HAVE_MTD_OTP=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+CONFIG_MTD_ONENAND=y
+# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
+# CONFIG_MTD_ONENAND_GENERIC is not set
+CONFIG_MTD_ONENAND_OMAP2=y
+CONFIG_MTD_ONENAND_OTP=y
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_TUSB6010=y
+# CONFIG_USB_MUSB_HOST is not set
+CONFIG_USB_MUSB_PERIPHERAL=y
+# CONFIG_USB_MUSB_OTG is not set
+CONFIG_USB_GADGET_MUSB_HDRC=y
+# CONFIG_MUSB_PIO_ONLY is not set
+# CONFIG_USB_INVENTRA_DMA is not set
+# CONFIG_USB_TI_CPPI_DMA is not set
+CONFIG_USB_TUSB_OMAP_DMA=y
+CONFIG_USB_MUSB_DEBUG=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DEBUG=y
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+CONFIG_NOP_USB_XCEIV=y
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
-- 
cgit v1.2.3


From 613f77696e2c489e87def86a443fb4889acb95aa Mon Sep 17 00:00:00 2001
From: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Date: Fri, 28 Aug 2009 10:54:40 -0700
Subject: OMAP: iommu: fix wrong argument in flush_cache_vmap()

The second argument should be the end address, not the
length. Actually there will not be any effect on the behavior of this
driver since flush_cache_vmap() calls flush_cache_all() in the end.

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/iovmm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c
index 2fce2c151a9..6fc52fcbdc0 100644
--- a/arch/arm/plat-omap/iovmm.c
+++ b/arch/arm/plat-omap/iovmm.c
@@ -199,7 +199,7 @@ static void *vmap_sg(const struct sg_table *sgt)
 		va += bytes;
 	}
 
-	flush_cache_vmap(new->addr, total);
+	flush_cache_vmap(new->addr, new->addr + total);
 	return new->addr;
 
 err_out:
-- 
cgit v1.2.3


From 14e0e6796a0d460ac6f7727616161dc317bbbf3a Mon Sep 17 00:00:00 2001
From: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Date: Fri, 28 Aug 2009 10:54:41 -0700
Subject: OMAP: iommu: add initial debugfs support

This enables to peek the following data.

$ /debug/iommu/isp# ls
mem             nr_tlb_entries  regs
mmap            pagetable       tlb
$ /debug/iommu/isp# head pagetable
L:      da:      pa:
-----------------------------------------
2: 00001000 8ae4a002
2: 00002000 8e7bb002
2: 00003000 8ae49002
2: 00004000 8ae65002
.....

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/iommu2.c            |  19 +-
 arch/arm/plat-omap/Kconfig              |   4 +
 arch/arm/plat-omap/Makefile             |   1 +
 arch/arm/plat-omap/include/mach/iommu.h |   6 +-
 arch/arm/plat-omap/iommu-debug.c        | 415 ++++++++++++++++++++++++++++++++
 arch/arm/plat-omap/iommu.c              |  23 +-
 6 files changed, 449 insertions(+), 19 deletions(-)
 create mode 100644 arch/arm/plat-omap/iommu-debug.c

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c
index 015f22a53ea..2d9b5cc981c 100644
--- a/arch/arm/mach-omap2/iommu2.c
+++ b/arch/arm/mach-omap2/iommu2.c
@@ -217,10 +217,19 @@ static ssize_t omap2_dump_cr(struct iommu *obj, struct cr_regs *cr, char *buf)
 }
 
 #define pr_reg(name)							\
-	p += sprintf(p, "%20s: %08x\n",					\
-		     __stringify(name), iommu_read_reg(obj, MMU_##name));
-
-static ssize_t omap2_iommu_dump_ctx(struct iommu *obj, char *buf)
+	do {								\
+		ssize_t bytes;						\
+		const char *str = "%20s: %08x\n";			\
+		const int maxcol = 32;					\
+		bytes = snprintf(p, maxcol, str, __stringify(name),	\
+				 iommu_read_reg(obj, MMU_##name));	\
+		p += bytes;						\
+		len -= bytes;						\
+		if (len < maxcol)					\
+			goto out;					\
+	} while (0)
+
+static ssize_t omap2_iommu_dump_ctx(struct iommu *obj, char *buf, ssize_t len)
 {
 	char *p = buf;
 
@@ -242,7 +251,7 @@ static ssize_t omap2_iommu_dump_ctx(struct iommu *obj, char *buf)
 	pr_reg(READ_CAM);
 	pr_reg(READ_RAM);
 	pr_reg(EMU_FAULT_AD);
-
+out:
 	return p - buf;
 }
 
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index efe85d09519..ab9f9efc9b6 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -120,6 +120,10 @@ config OMAP_MBOX_FWK
 config OMAP_IOMMU
 	tristate
 
+config OMAP_IOMMU_DEBUG
+	depends on OMAP_IOMMU
+	tristate
+
 choice
         prompt "System timer"
 	default OMAP_MPU_TIMER
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index a8327952395..769a4c20036 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 obj-$(CONFIG_OMAP_IOMMU) += iommu.o iovmm.o
+obj-$(CONFIG_OMAP_IOMMU_DEBUG) += iommu-debug.o
 
 obj-$(CONFIG_CPU_FREQ) += cpu-omap.o
 obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
diff --git a/arch/arm/plat-omap/include/mach/iommu.h b/arch/arm/plat-omap/include/mach/iommu.h
index 769b00b4c34..46d41ac83db 100644
--- a/arch/arm/plat-omap/include/mach/iommu.h
+++ b/arch/arm/plat-omap/include/mach/iommu.h
@@ -95,7 +95,7 @@ struct iommu_functions {
 
 	void (*save_ctx)(struct iommu *obj);
 	void (*restore_ctx)(struct iommu *obj);
-	ssize_t (*dump_ctx)(struct iommu *obj, char *buf);
+	ssize_t (*dump_ctx)(struct iommu *obj, char *buf, ssize_t len);
 };
 
 struct iommu_platform_data {
@@ -162,7 +162,7 @@ extern void uninstall_iommu_arch(const struct iommu_functions *ops);
 extern int foreach_iommu_device(void *data,
 				int (*fn)(struct device *, void *));
 
-extern ssize_t iommu_dump_ctx(struct iommu *obj, char *buf);
-extern size_t dump_tlb_entries(struct iommu *obj, char *buf);
+extern ssize_t iommu_dump_ctx(struct iommu *obj, char *buf, ssize_t len);
+extern size_t dump_tlb_entries(struct iommu *obj, char *buf, ssize_t len);
 
 #endif /* __MACH_IOMMU_H */
diff --git a/arch/arm/plat-omap/iommu-debug.c b/arch/arm/plat-omap/iommu-debug.c
new file mode 100644
index 00000000000..c799b3b0d70
--- /dev/null
+++ b/arch/arm/plat-omap/iommu-debug.c
@@ -0,0 +1,415 @@
+/*
+ * omap iommu: debugfs interface
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/platform_device.h>
+#include <linux/debugfs.h>
+
+#include <mach/iommu.h>
+#include <mach/iovmm.h>
+
+#include "iopgtable.h"
+
+#define MAXCOLUMN 100 /* for short messages */
+
+static DEFINE_MUTEX(iommu_debug_lock);
+
+static struct dentry *iommu_debug_root;
+
+static ssize_t debug_read_ver(struct file *file, char __user *userbuf,
+			      size_t count, loff_t *ppos)
+{
+	u32 ver = iommu_arch_version();
+	char buf[MAXCOLUMN], *p = buf;
+
+	p += sprintf(p, "H/W version: %d.%d\n", (ver >> 4) & 0xf , ver & 0xf);
+
+	return simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
+}
+
+static ssize_t debug_read_regs(struct file *file, char __user *userbuf,
+			       size_t count, loff_t *ppos)
+{
+	struct iommu *obj = file->private_data;
+	char *p, *buf;
+	ssize_t bytes;
+
+	buf = kmalloc(count, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+	p = buf;
+
+	mutex_lock(&iommu_debug_lock);
+
+	bytes = iommu_dump_ctx(obj, p, count);
+	bytes = simple_read_from_buffer(userbuf, count, ppos, buf, bytes);
+
+	mutex_unlock(&iommu_debug_lock);
+	kfree(buf);
+
+	return bytes;
+}
+
+static ssize_t debug_read_tlb(struct file *file, char __user *userbuf,
+			      size_t count, loff_t *ppos)
+{
+	struct iommu *obj = file->private_data;
+	char *p, *buf;
+	ssize_t bytes, rest;
+
+	buf = kmalloc(count, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+	p = buf;
+
+	mutex_lock(&iommu_debug_lock);
+
+	p += sprintf(p, "%8s %8s\n", "cam:", "ram:");
+	p += sprintf(p, "-----------------------------------------\n");
+	rest = count - (p - buf);
+	p += dump_tlb_entries(obj, p, rest);
+
+	bytes = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
+
+	mutex_unlock(&iommu_debug_lock);
+	kfree(buf);
+
+	return bytes;
+}
+
+static ssize_t debug_write_pagetable(struct file *file,
+		     const char __user *userbuf, size_t count, loff_t *ppos)
+{
+	struct iotlb_entry e;
+	struct cr_regs cr;
+	int err;
+	struct iommu *obj = file->private_data;
+	char buf[MAXCOLUMN], *p = buf;
+
+	count = min(count, sizeof(buf));
+
+	mutex_lock(&iommu_debug_lock);
+	if (copy_from_user(p, userbuf, count)) {
+		mutex_unlock(&iommu_debug_lock);
+		return -EFAULT;
+	}
+
+	sscanf(p, "%x %x", &cr.cam, &cr.ram);
+	if (!cr.cam || !cr.ram) {
+		mutex_unlock(&iommu_debug_lock);
+		return -EINVAL;
+	}
+
+	iotlb_cr_to_e(&cr, &e);
+	err = iopgtable_store_entry(obj, &e);
+	if (err)
+		dev_err(obj->dev, "%s: fail to store cr\n", __func__);
+
+	mutex_unlock(&iommu_debug_lock);
+	return count;
+}
+
+#define dump_ioptable_entry_one(lv, da, val)			\
+	({							\
+		int __err = 0;					\
+		ssize_t bytes;					\
+		const int maxcol = 22;				\
+		const char *str = "%d: %08x %08x\n";		\
+		bytes = snprintf(p, maxcol, str, lv, da, val);	\
+		p += bytes;					\
+		len -= bytes;					\
+		if (len < maxcol)				\
+			__err = -ENOMEM;			\
+		__err;						\
+	})
+
+static ssize_t dump_ioptable(struct iommu *obj, char *buf, ssize_t len)
+{
+	int i;
+	u32 *iopgd;
+	char *p = buf;
+
+	spin_lock(&obj->page_table_lock);
+
+	iopgd = iopgd_offset(obj, 0);
+	for (i = 0; i < PTRS_PER_IOPGD; i++, iopgd++) {
+		int j, err;
+		u32 *iopte;
+		u32 da;
+
+		if (!*iopgd)
+			continue;
+
+		if (!(*iopgd & IOPGD_TABLE)) {
+			da = i << IOPGD_SHIFT;
+
+			err = dump_ioptable_entry_one(1, da, *iopgd);
+			if (err)
+				goto out;
+			continue;
+		}
+
+		iopte = iopte_offset(iopgd, 0);
+
+		for (j = 0; j < PTRS_PER_IOPTE; j++, iopte++) {
+			if (!*iopte)
+				continue;
+
+			da = (i << IOPGD_SHIFT) + (j << IOPTE_SHIFT);
+			err = dump_ioptable_entry_one(2, da, *iopgd);
+			if (err)
+				goto out;
+		}
+	}
+out:
+	spin_unlock(&obj->page_table_lock);
+
+	return p - buf;
+}
+
+static ssize_t debug_read_pagetable(struct file *file, char __user *userbuf,
+				    size_t count, loff_t *ppos)
+{
+	struct iommu *obj = file->private_data;
+	char *p, *buf;
+	size_t bytes;
+
+	buf = (char *)__get_free_page(GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+	p = buf;
+
+	p += sprintf(p, "L: %8s %8s\n", "da:", "pa:");
+	p += sprintf(p, "-----------------------------------------\n");
+
+	mutex_lock(&iommu_debug_lock);
+
+	bytes = PAGE_SIZE - (p - buf);
+	p += dump_ioptable(obj, p, bytes);
+
+	bytes = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
+
+	mutex_unlock(&iommu_debug_lock);
+	free_page((unsigned long)buf);
+
+	return bytes;
+}
+
+static ssize_t debug_read_mmap(struct file *file, char __user *userbuf,
+			       size_t count, loff_t *ppos)
+{
+	struct iommu *obj = file->private_data;
+	char *p, *buf;
+	struct iovm_struct *tmp;
+	int uninitialized_var(i);
+	ssize_t bytes;
+
+	buf = (char *)__get_free_page(GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+	p = buf;
+
+	p += sprintf(p, "%-3s %-8s %-8s %6s %8s\n",
+		     "No", "start", "end", "size", "flags");
+	p += sprintf(p, "-------------------------------------------------\n");
+
+	mutex_lock(&iommu_debug_lock);
+
+	list_for_each_entry(tmp, &obj->mmap, list) {
+		size_t len;
+		const char *str = "%3d %08x-%08x %6x %8x\n";
+		const int maxcol = 39;
+
+		len = tmp->da_end - tmp->da_start;
+		p += snprintf(p, maxcol, str,
+			      i, tmp->da_start, tmp->da_end, len, tmp->flags);
+
+		if (PAGE_SIZE - (p - buf) < maxcol)
+			break;
+		i++;
+	}
+
+	bytes = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
+
+	mutex_unlock(&iommu_debug_lock);
+	free_page((unsigned long)buf);
+
+	return bytes;
+}
+
+static ssize_t debug_read_mem(struct file *file, char __user *userbuf,
+			      size_t count, loff_t *ppos)
+{
+	struct iommu *obj = file->private_data;
+	char *p, *buf;
+	struct iovm_struct *area;
+	ssize_t bytes;
+
+	count = min_t(ssize_t, count, PAGE_SIZE);
+
+	buf = (char *)__get_free_page(GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+	p = buf;
+
+	mutex_lock(&iommu_debug_lock);
+
+	area = find_iovm_area(obj, (u32)ppos);
+	if (IS_ERR(area)) {
+		bytes = -EINVAL;
+		goto err_out;
+	}
+	memcpy(p, area->va, count);
+	p += count;
+
+	bytes = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
+err_out:
+	mutex_unlock(&iommu_debug_lock);
+	free_page((unsigned long)buf);
+
+	return bytes;
+}
+
+static ssize_t debug_write_mem(struct file *file, const char __user *userbuf,
+			       size_t count, loff_t *ppos)
+{
+	struct iommu *obj = file->private_data;
+	struct iovm_struct *area;
+	char *p, *buf;
+
+	count = min_t(size_t, count, PAGE_SIZE);
+
+	buf = (char *)__get_free_page(GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+	p = buf;
+
+	mutex_lock(&iommu_debug_lock);
+
+	if (copy_from_user(p, userbuf, count)) {
+		count =  -EFAULT;
+		goto err_out;
+	}
+
+	area = find_iovm_area(obj, (u32)ppos);
+	if (IS_ERR(area)) {
+		count = -EINVAL;
+		goto err_out;
+	}
+	memcpy(area->va, p, count);
+err_out:
+	mutex_unlock(&iommu_debug_lock);
+	free_page((unsigned long)buf);
+
+	return count;
+}
+
+static int debug_open_generic(struct inode *inode, struct file *file)
+{
+	file->private_data = inode->i_private;
+	return 0;
+}
+
+#define DEBUG_FOPS(name)						\
+	static const struct file_operations debug_##name##_fops = {	\
+		.open = debug_open_generic,				\
+		.read = debug_read_##name,				\
+		.write = debug_write_##name,				\
+	};
+
+#define DEBUG_FOPS_RO(name)						\
+	static const struct file_operations debug_##name##_fops = {	\
+		.open = debug_open_generic,				\
+		.read = debug_read_##name,				\
+	};
+
+DEBUG_FOPS_RO(ver);
+DEBUG_FOPS_RO(regs);
+DEBUG_FOPS_RO(tlb);
+DEBUG_FOPS(pagetable);
+DEBUG_FOPS_RO(mmap);
+DEBUG_FOPS(mem);
+
+#define __DEBUG_ADD_FILE(attr, mode)					\
+	{								\
+		struct dentry *dent;					\
+		dent = debugfs_create_file(#attr, mode, parent,		\
+					   obj, &debug_##attr##_fops);	\
+		if (!dent)						\
+			return -ENOMEM;					\
+	}
+
+#define DEBUG_ADD_FILE(name) __DEBUG_ADD_FILE(name, 600)
+#define DEBUG_ADD_FILE_RO(name) __DEBUG_ADD_FILE(name, 400)
+
+static int iommu_debug_register(struct device *dev, void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct iommu *obj = platform_get_drvdata(pdev);
+	struct dentry *d, *parent;
+
+	if (!obj || !obj->dev)
+		return -EINVAL;
+
+	d = debugfs_create_dir(obj->name, iommu_debug_root);
+	if (!d)
+		return -ENOMEM;
+	parent = d;
+
+	d = debugfs_create_u8("nr_tlb_entries", 400, parent,
+			      (u8 *)&obj->nr_tlb_entries);
+	if (!d)
+		return -ENOMEM;
+
+	DEBUG_ADD_FILE_RO(ver);
+	DEBUG_ADD_FILE_RO(regs);
+	DEBUG_ADD_FILE_RO(tlb);
+	DEBUG_ADD_FILE(pagetable);
+	DEBUG_ADD_FILE_RO(mmap);
+	DEBUG_ADD_FILE(mem);
+
+	return 0;
+}
+
+static int __init iommu_debug_init(void)
+{
+	struct dentry *d;
+	int err;
+
+	d = debugfs_create_dir("iommu", NULL);
+	if (!d)
+		return -ENOMEM;
+	iommu_debug_root = d;
+
+	err = foreach_iommu_device(d, iommu_debug_register);
+	if (err)
+		goto err_out;
+	return 0;
+
+err_out:
+	debugfs_remove_recursive(iommu_debug_root);
+	return err;
+}
+module_init(iommu_debug_init)
+
+static void __exit iommu_debugfs_exit(void)
+{
+	debugfs_remove_recursive(iommu_debug_root);
+}
+module_exit(iommu_debugfs_exit)
+
+MODULE_DESCRIPTION("omap iommu: debugfs interface");
+MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
index 4a030139901..4b601270730 100644
--- a/arch/arm/plat-omap/iommu.c
+++ b/arch/arm/plat-omap/iommu.c
@@ -351,16 +351,14 @@ EXPORT_SYMBOL_GPL(flush_iotlb_all);
 
 #if defined(CONFIG_OMAP_IOMMU_DEBUG_MODULE)
 
-ssize_t iommu_dump_ctx(struct iommu *obj, char *buf)
+ssize_t iommu_dump_ctx(struct iommu *obj, char *buf, ssize_t bytes)
 {
-	ssize_t bytes;
-
 	if (!obj || !buf)
 		return -EINVAL;
 
 	clk_enable(obj->clk);
 
-	bytes = arch_iommu->dump_ctx(obj, buf);
+	bytes = arch_iommu->dump_ctx(obj, buf, bytes);
 
 	clk_disable(obj->clk);
 
@@ -368,7 +366,7 @@ ssize_t iommu_dump_ctx(struct iommu *obj, char *buf)
 }
 EXPORT_SYMBOL_GPL(iommu_dump_ctx);
 
-static int __dump_tlb_entries(struct iommu *obj, struct cr_regs *crs)
+static int __dump_tlb_entries(struct iommu *obj, struct cr_regs *crs, int num)
 {
 	int i;
 	struct iotlb_lock saved, l;
@@ -379,7 +377,7 @@ static int __dump_tlb_entries(struct iommu *obj, struct cr_regs *crs)
 	iotlb_lock_get(obj, &saved);
 	memcpy(&l, &saved, sizeof(saved));
 
-	for (i = 0; i < obj->nr_tlb_entries; i++) {
+	for (i = 0; i < num; i++) {
 		struct cr_regs tmp;
 
 		iotlb_lock_get(obj, &l);
@@ -402,18 +400,21 @@ static int __dump_tlb_entries(struct iommu *obj, struct cr_regs *crs)
  * @obj:	target iommu
  * @buf:	output buffer
  **/
-size_t dump_tlb_entries(struct iommu *obj, char *buf)
+size_t dump_tlb_entries(struct iommu *obj, char *buf, ssize_t bytes)
 {
-	int i, n;
+	int i, num;
 	struct cr_regs *cr;
 	char *p = buf;
 
-	cr = kcalloc(obj->nr_tlb_entries, sizeof(*cr), GFP_KERNEL);
+	num = bytes / sizeof(*cr);
+	num = min(obj->nr_tlb_entries, num);
+
+	cr = kcalloc(num, sizeof(*cr), GFP_KERNEL);
 	if (!cr)
 		return 0;
 
-	n = __dump_tlb_entries(obj, cr);
-	for (i = 0; i < n; i++)
+	num = __dump_tlb_entries(obj, cr, num);
+	for (i = 0; i < num; i++)
 		p += iotlb_dump_cr(obj, cr + i, p);
 	kfree(cr);
 
-- 
cgit v1.2.3


From c426df87d8197cde077d03c808f52e3a17045b09 Mon Sep 17 00:00:00 2001
From: Vikram Pandita <vikram.pandita@ti.com>
Date: Fri, 28 Aug 2009 11:24:08 -0700
Subject: OMAP2/3: Pass irqflags to 8250 driver

Pass irqflags to 8250 driver with platform_data. At least Zoom2 has
IRQF_TRIGGER_RISING requirement for the 8250 GPIO irq.

This patch is dependent on 8250 driver changes getting accepted upstream:
http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git;a=commit;h=7053133124d5cdf207c1168c7a0c582a18e12ea7

Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-zoom-debugboard.c | 2 ++
 arch/arm/mach-omap2/serial.c                | 2 +-
 2 files changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
index bac5c4321ff..f546063775b 100644
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -12,6 +12,7 @@
 #include <linux/gpio.h>
 #include <linux/serial_8250.h>
 #include <linux/smsc911x.h>
+#include <linux/interrupt.h>
 
 #include <mach/gpmc.h>
 
@@ -84,6 +85,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.mapbase	= 0x10000000,
 		.irq		= OMAP_GPIO_IRQ(102),
 		.flags		= UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ,
+		.irqflags	= IRQF_SHARED | IRQF_TRIGGER_RISING,
 		.iotype		= UPIO_MEM,
 		.regshift	= 1,
 		.uartclk	= QUART_CLK,
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 409b03309af..dd3c735b558 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -460,7 +460,7 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
 		uart->padconf = 0;
 	}
 
-	p->flags |= UPF_SHARE_IRQ;
+	p->irqflags |= IRQF_SHARED;
 	ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED,
 			  "serial idle", (void *)uart);
 	WARN_ON(ret);
-- 
cgit v1.2.3


From 8870d946e1ff459453296733f9f389a3a5bc2983 Mon Sep 17 00:00:00 2001
From: Sergio Aguirre <saaguirre@ti.com>
Date: Fri, 28 Aug 2009 11:24:09 -0700
Subject: OMAP3: 3430SDP: Fix defconfig

This patch makes the SDP boot again with the defconfig.

Changes done:

 - Removes other selected boards.
 - Sets the Low Level debug output for UART1.
 - Disables some paripherals from other boards.

Tested on a SDP3430-VE5.1.0 (OMAP3430 ES3.1)

Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/configs/omap_3430sdp_defconfig | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/configs/omap_3430sdp_defconfig b/arch/arm/configs/omap_3430sdp_defconfig
index 8fb918d9ba6..9a510eab75a 100644
--- a/arch/arm/configs/omap_3430sdp_defconfig
+++ b/arch/arm/configs/omap_3430sdp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc8
-# Fri Mar 13 14:17:01 2009
+# Linux kernel version: 2.6.30-omap1
+# Tue Jun 23 10:36:45 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -197,9 +197,9 @@ CONFIG_OMAP_MCBSP=y
 CONFIG_OMAP_32K_TIMER=y
 CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
 # CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
 CONFIG_OMAP_SERIAL_WAKE=y
 CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
@@ -207,10 +207,10 @@ CONFIG_ARCH_OMAP3430=y
 #
 # OMAP Board Type
 #
-CONFIG_MACH_OMAP3_BEAGLE=y
-CONFIG_MACH_OMAP_LDP=y
-CONFIG_MACH_OVERO=y
-CONFIG_MACH_OMAP3_PANDORA=y
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
 CONFIG_MACH_OMAP_3430SDP=y
 
 #
@@ -950,7 +950,7 @@ CONFIG_SPI_OMAP24XX=y
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
-CONFIG_DEBUG_GPIO=y
+# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
 
 #
@@ -1370,7 +1370,7 @@ CONFIG_SND_OMAP_SOC=y
 CONFIG_SND_OMAP_SOC_MCBSP=y
 # CONFIG_SND_OMAP_SOC_OVERO is not set
 CONFIG_SND_OMAP_SOC_SDP3430=y
-CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y
+# CONFIG_SND_OMAP_SOC_OMAP3_PANDORA is not set
 CONFIG_SND_SOC_I2C_AND_SPI=y
 # CONFIG_SND_SOC_ALL_CODECS is not set
 CONFIG_SND_SOC_TWL4030=y
-- 
cgit v1.2.3


From ac2a048c3cc7c76d848093298ffa452558a7b2e8 Mon Sep 17 00:00:00 2001
From: Timo Kokkonen <timo.t.kokkonen@nokia.com>
Date: Fri, 28 Aug 2009 11:24:10 -0700
Subject: OMAP3: rx51_defconfig: add twl4030 to rx51 default configuration

twl4030 watchdog will be compiled as a module by default.

Signed-off-by: Atal Shargorodsky <ext-atal.shargorodsky@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/configs/rx51_defconfig | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/arm')

diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig
index f238df66efd..e7e31332c62 100644
--- a/arch/arm/configs/rx51_defconfig
+++ b/arch/arm/configs/rx51_defconfig
@@ -1006,6 +1006,7 @@ CONFIG_WATCHDOG=y
 #
 # CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=m
+CONFIG_TWL4030_WATCHDOG=m
 
 #
 # USB-based Watchdog Cards
-- 
cgit v1.2.3


From 57b9daa0e18167e8ba449bc236c3f4a755dd1833 Mon Sep 17 00:00:00 2001
From: Vikram Pandita <vikram.pandita@ti.com>
Date: Fri, 28 Aug 2009 11:24:11 -0700
Subject: OMAP3: MMC: Add mux for pins

For OMAP3 add MMC1 MMC2 pin mux MMC3 mux is not added as there are
multiple configurations possible, so the muxing is left to be done
in board file.

Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Chikkature Rajashekar <madhu.cr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/devices.c         | 41 ++++++++++++++++++++++++++++
 arch/arm/mach-omap2/mux.c             | 50 +++++++++++++++++++++++++++++++++++
 arch/arm/plat-omap/include/mach/mux.h | 28 ++++++++++++++++++++
 3 files changed, 119 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 894cc355818..a2e915639b7 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -513,6 +513,47 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
 			omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
 		}
 	}
+
+	if (cpu_is_omap3430()) {
+		if (controller_nr == 0) {
+			omap_cfg_reg(N28_3430_MMC1_CLK);
+			omap_cfg_reg(M27_3430_MMC1_CMD);
+			omap_cfg_reg(N27_3430_MMC1_DAT0);
+			if (mmc_controller->slots[0].wires == 4 ||
+				mmc_controller->slots[0].wires == 8) {
+				omap_cfg_reg(N26_3430_MMC1_DAT1);
+				omap_cfg_reg(N25_3430_MMC1_DAT2);
+				omap_cfg_reg(P28_3430_MMC1_DAT3);
+			}
+			if (mmc_controller->slots[0].wires == 8) {
+				omap_cfg_reg(P27_3430_MMC1_DAT4);
+				omap_cfg_reg(P26_3430_MMC1_DAT5);
+				omap_cfg_reg(R27_3430_MMC1_DAT6);
+				omap_cfg_reg(R25_3430_MMC1_DAT7);
+			}
+		}
+		if (controller_nr == 1) {
+			/* MMC2 */
+			omap_cfg_reg(AE2_3430_MMC2_CLK);
+			omap_cfg_reg(AG5_3430_MMC2_CMD);
+			omap_cfg_reg(AH5_3430_MMC2_DAT0);
+
+			/*
+			 * For 8 wire configurations, Lines DAT4, 5, 6 and 7 need to be muxed
+			 * in the board-*.c files
+			 */
+			if (mmc_controller->slots[0].wires == 4 ||
+				mmc_controller->slots[0].wires == 8) {
+				omap_cfg_reg(AH4_3430_MMC2_DAT1);
+				omap_cfg_reg(AG4_3430_MMC2_DAT2);
+				omap_cfg_reg(AF4_3430_MMC2_DAT3);
+			}
+		}
+
+		/*
+		 * For MMC3 the pins need to be muxed in the board-*.c files
+		 */
+	}
 }
 
 void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 43d6b92b65f..f63f3a23782 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -492,6 +492,56 @@ MUX_CFG_34XX("H16_34XX_SDRC_CKE0", 0x262,
 		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
 MUX_CFG_34XX("H17_34XX_SDRC_CKE1", 0x264,
 		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
+
+/* MMC1 */
+MUX_CFG_34XX("N28_3430_MMC1_CLK", 0x144,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("M27_3430_MMC1_CMD", 0x146,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("N27_3430_MMC1_DAT0", 0x148,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("N26_3430_MMC1_DAT1", 0x14a,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("N25_3430_MMC1_DAT2", 0x14c,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("P28_3430_MMC1_DAT3", 0x14e,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("P27_3430_MMC1_DAT4", 0x150,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("P26_3430_MMC1_DAT5", 0x152,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("R27_3430_MMC1_DAT6", 0x154,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("R25_3430_MMC1_DAT7", 0x156,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+
+/* MMC2 */
+MUX_CFG_34XX("AE2_3430_MMC2_CLK", 0x158,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AG5_3430_MMC2_CMD", 0x15A,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AH5_3430_MMC2_DAT0", 0x15c,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AH4_3430_MMC2_DAT1", 0x15e,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AG4_3430_MMC2_DAT2", 0x160,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AF4_3430_MMC2_DAT3", 0x162,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+
+/* MMC3 */
+MUX_CFG_34XX("AF10_3430_MMC3_CLK", 0x5d8,
+		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AC3_3430_MMC3_CMD", 0x1d0,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AE11_3430_MMC3_DAT0", 0x5e4,
+		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AH9_3430_MMC3_DAT1", 0x5e6,
+		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AF13_3430_MMC3_DAT2", 0x5e8,
+		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AF13_3430_MMC3_DAT3", 0x5e2,
+		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
 };
 
 #define OMAP34XX_PINS_SZ	ARRAY_SIZE(omap34xx_pins)
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
index 80281c458ba..2c57bad65b0 100644
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -857,6 +857,34 @@ enum omap34xx_index {
 	/* OMAP3 SDRC CKE signals to SDR/DDR ram chips */
 	H16_34XX_SDRC_CKE0,
 	H17_34XX_SDRC_CKE1,
+
+	/* MMC1 */
+	N28_3430_MMC1_CLK,
+	M27_3430_MMC1_CMD,
+	N27_3430_MMC1_DAT0,
+	N26_3430_MMC1_DAT1,
+	N25_3430_MMC1_DAT2,
+	P28_3430_MMC1_DAT3,
+	P27_3430_MMC1_DAT4,
+	P26_3430_MMC1_DAT5,
+	R27_3430_MMC1_DAT6,
+	R25_3430_MMC1_DAT7,
+
+	/* MMC2 */
+	AE2_3430_MMC2_CLK,
+	AG5_3430_MMC2_CMD,
+	AH5_3430_MMC2_DAT0,
+	AH4_3430_MMC2_DAT1,
+	AG4_3430_MMC2_DAT2,
+	AF4_3430_MMC2_DAT3,
+
+	/* MMC3 */
+	AF10_3430_MMC3_CLK,
+	AC3_3430_MMC3_CMD,
+	AE11_3430_MMC3_DAT0,
+	AH9_3430_MMC3_DAT1,
+	AF13_3430_MMC3_DAT2,
+	AF13_3430_MMC3_DAT3,
 };
 
 struct omap_mux_cfg {
-- 
cgit v1.2.3


From 70ac51ab2cd9ddc7ded24adbe63fc6fd3557e44c Mon Sep 17 00:00:00 2001
From: Vikram Pandita <vikram.pandita@ti.com>
Date: Fri, 28 Aug 2009 11:24:13 -0700
Subject: OMAP3: Zoom2: Add TWL4030 support

Add TWL4030 CORE and TWL4030 drivers to Zoom2 board file
TWL drivers enabled are:
	bci
	madc
	usb
	keypad
	mmc

Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-zoom2.c | 203 +++++++++++++++++++++++++++++++++++---
 1 file changed, 192 insertions(+), 11 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index 3a42eca1ad8..dabba2720a9 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -12,17 +12,84 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/input.h>
 #include <linux/gpio.h>
 #include <linux/i2c/twl4030.h>
+#include <linux/regulator/machine.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
 #include <mach/usb.h>
+#include <mach/keypad.h>
 
 #include "mmc-twl4030.h"
 
+/* Zoom2 has Qwerty keyboard*/
+static int zoom2_twl4030_keymap[] = {
+	KEY(0, 0, KEY_E),
+	KEY(1, 0, KEY_R),
+	KEY(2, 0, KEY_T),
+	KEY(3, 0, KEY_HOME),
+	KEY(6, 0, KEY_I),
+	KEY(7, 0, KEY_LEFTSHIFT),
+	KEY(0, 1, KEY_D),
+	KEY(1, 1, KEY_F),
+	KEY(2, 1, KEY_G),
+	KEY(3, 1, KEY_SEND),
+	KEY(6, 1, KEY_K),
+	KEY(7, 1, KEY_ENTER),
+	KEY(0, 2, KEY_X),
+	KEY(1, 2, KEY_C),
+	KEY(2, 2, KEY_V),
+	KEY(3, 2, KEY_END),
+	KEY(6, 2, KEY_DOT),
+	KEY(7, 2, KEY_CAPSLOCK),
+	KEY(0, 3, KEY_Z),
+	KEY(1, 3, KEY_KPPLUS),
+	KEY(2, 3, KEY_B),
+	KEY(3, 3, KEY_F1),
+	KEY(6, 3, KEY_O),
+	KEY(7, 3, KEY_SPACE),
+	KEY(0, 4, KEY_W),
+	KEY(1, 4, KEY_Y),
+	KEY(2, 4, KEY_U),
+	KEY(3, 4, KEY_F2),
+	KEY(4, 4, KEY_VOLUMEUP),
+	KEY(6, 4, KEY_L),
+	KEY(7, 4, KEY_LEFT),
+	KEY(0, 5, KEY_S),
+	KEY(1, 5, KEY_H),
+	KEY(2, 5, KEY_J),
+	KEY(3, 5, KEY_F3),
+	KEY(5, 5, KEY_VOLUMEDOWN),
+	KEY(6, 5, KEY_M),
+	KEY(4, 5, KEY_ENTER),
+	KEY(7, 5, KEY_RIGHT),
+	KEY(0, 6, KEY_Q),
+	KEY(1, 6, KEY_A),
+	KEY(2, 6, KEY_N),
+	KEY(3, 6, KEY_BACKSPACE),
+	KEY(6, 6, KEY_P),
+	KEY(7, 6, KEY_UP),
+	KEY(6, 7, KEY_SELECT),
+	KEY(7, 7, KEY_DOWN),
+	KEY(0, 7, KEY_PROG1),	/*MACRO 1 <User defined> */
+	KEY(1, 7, KEY_PROG2),	/*MACRO 2 <User defined> */
+	KEY(2, 7, KEY_PROG3),	/*MACRO 3 <User defined> */
+	KEY(3, 7, KEY_PROG4),	/*MACRO 4 <User defined> */
+	0
+};
+
+static struct twl4030_keypad_data zoom2_kp_twl4030_data = {
+	.rows		= 8,
+	.cols		= 8,
+	.keymap		= zoom2_twl4030_keymap,
+	.keymapsize	= ARRAY_SIZE(zoom2_twl4030_keymap),
+	.rep		= 1,
+};
+
 static void __init omap_zoom2_init_irq(void)
 {
 	omap2_init_common_hw(NULL, NULL);
@@ -33,10 +100,127 @@ static void __init omap_zoom2_init_irq(void)
 static struct omap_board_config_kernel zoom2_config[] __initdata = {
 };
 
+static struct regulator_consumer_supply zoom2_vmmc1_supply = {
+	.supply		= "vmmc",
+};
+
+static struct regulator_consumer_supply zoom2_vsim_supply = {
+	.supply		= "vmmc_aux",
+};
+
+static struct regulator_consumer_supply zoom2_vmmc2_supply = {
+	.supply		= "vmmc",
+};
+
+/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
+static struct regulator_init_data zoom2_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = &zoom2_vmmc1_supply,
+};
+
+/* VMMC2 for MMC2 card */
+static struct regulator_init_data zoom2_vmmc2 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 1850000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = &zoom2_vmmc2_supply,
+};
+
+/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
+static struct regulator_init_data zoom2_vsim = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 3000000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = &zoom2_vsim_supply,
+};
+
+static struct twl4030_hsmmc_info mmc[] __initdata = {
+	{
+		.mmc		= 1,
+		.wires		= 4,
+		.gpio_wp	= -EINVAL,
+	},
+	{
+		.mmc		= 2,
+		.wires		= 4,
+		.gpio_wp	= -EINVAL,
+	},
+	{}      /* Terminator */
+};
+
+static int zoom2_twl_gpio_setup(struct device *dev,
+		unsigned gpio, unsigned ngpio)
+{
+	/* gpio + 0 is "mmc0_cd" (input/IRQ),
+	 * gpio + 1 is "mmc1_cd" (input/IRQ)
+	 */
+	mmc[0].gpio_cd = gpio + 0;
+	mmc[1].gpio_cd = gpio + 1;
+	twl4030_mmc_init(mmc);
+
+	/* link regulators to MMC adapters ... we "know" the
+	 * regulators will be set up only *after* we return.
+	*/
+	zoom2_vmmc1_supply.dev = mmc[0].dev;
+	zoom2_vsim_supply.dev = mmc[0].dev;
+	zoom2_vmmc2_supply.dev = mmc[1].dev;
+
+	return 0;
+}
+
+
+static int zoom2_batt_table[] = {
+/* 0 C*/
+30800, 29500, 28300, 27100,
+26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
+17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
+11600, 11200, 10800, 10400, 10000, 9630,  9280,  8950,  8620,  8310,
+8020,  7730,  7460,  7200,  6950,  6710,  6470,  6250,  6040,  5830,
+5640,  5450,  5260,  5090,  4920,  4760,  4600,  4450,  4310,  4170,
+4040,  3910,  3790,  3670,  3550
+};
+
+static struct twl4030_bci_platform_data zoom2_bci_data = {
+	.battery_tmp_tbl	= zoom2_batt_table,
+	.tblsize		= ARRAY_SIZE(zoom2_batt_table),
+};
+
+static struct twl4030_usb_data zoom2_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
 static struct twl4030_gpio_platform_data zoom2_gpio_data = {
 	.gpio_base	= OMAP_MAX_GPIO_LINES,
 	.irq_base	= TWL4030_GPIO_IRQ_BASE,
 	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.setup		= zoom2_twl_gpio_setup,
+};
+
+static struct twl4030_madc_platform_data zoom2_madc_data = {
+	.irq_line	= 1,
 };
 
 static struct twl4030_platform_data zoom2_twldata = {
@@ -44,7 +228,15 @@ static struct twl4030_platform_data zoom2_twldata = {
 	.irq_end	= TWL4030_IRQ_END,
 
 	/* platform_data for children goes here */
+	.bci		= &zoom2_bci_data,
+	.madc		= &zoom2_madc_data,
+	.usb		= &zoom2_usb_data,
 	.gpio		= &zoom2_gpio_data,
+	.keypad		= &zoom2_kp_twl4030_data,
+	.vmmc1          = &zoom2_vmmc1,
+	.vmmc2          = &zoom2_vmmc2,
+	.vsim           = &zoom2_vsim,
+
 };
 
 static struct i2c_board_info __initdata zoom2_i2c_boardinfo[] = {
@@ -65,16 +257,6 @@ static int __init omap_i2c_init(void)
 	return 0;
 }
 
-static struct twl4030_hsmmc_info mmc[] __initdata = {
-	{
-		.mmc		= 1,
-		.wires		= 4,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-	},
-	{}	/* Terminator */
-};
-
 extern int __init omap_zoom2_debugboard_init(void);
 
 static void __init omap_zoom2_init(void)
@@ -84,7 +266,6 @@ static void __init omap_zoom2_init(void)
 	omap_board_config_size = ARRAY_SIZE(zoom2_config);
 	omap_serial_init();
 	omap_zoom2_debugboard_init();
-	twl4030_mmc_init(mmc);
 	usb_musb_init();
 }
 
-- 
cgit v1.2.3


From 1eab46a2ea36deda9621ae507319812bb1f82f92 Mon Sep 17 00:00:00 2001
From: Vikram Pandita <vikram.pandita@ti.com>
Date: Fri, 28 Aug 2009 11:24:14 -0700
Subject: OMAP3: Zoom2: Update board defconfig

Update defconfig for Zoom2 to include
TWL4030 core
TWL4030 drivers (bci, gpio, keypad, usb, mmc)

Also sync the defconfig after issuing a menuconfig

Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/configs/omap_zoom2_defconfig | 484 ++++++++++++++++++++++++++++------
 1 file changed, 408 insertions(+), 76 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig
index 213fe9c5eaa..f1739fae7ed 100644
--- a/arch/arm/configs/omap_zoom2_defconfig
+++ b/arch/arm/configs/omap_zoom2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc5
-# Fri Oct 10 11:49:41 2008
+# Linux kernel version: 2.6.30-omap1
+# Fri Jun 12 17:25:46 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -22,8 +22,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -39,44 +37,61 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -84,19 +99,13 @@ CONFIG_SLAB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -104,11 +113,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -124,7 +130,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # System Type
@@ -134,10 +140,10 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
@@ -158,14 +164,17 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
 
 #
 # TI OMAP Implementations
@@ -174,6 +183,7 @@ CONFIG_ARCH_OMAP_OTG=y
 # CONFIG_ARCH_OMAP1 is not set
 # CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
 
 #
 # OMAP Feature Selections
@@ -185,6 +195,7 @@ CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
 CONFIG_OMAP_MUX_WARNINGS=y
 CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
 # CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
 CONFIG_OMAP_32K_TIMER_HZ=128
@@ -192,25 +203,20 @@ CONFIG_OMAP_DM_TIMER=y
 # CONFIG_OMAP_LL_DEBUG_UART1 is not set
 # CONFIG_OMAP_LL_DEBUG_UART2 is not set
 CONFIG_OMAP_LL_DEBUG_UART3=y
-CONFIG_OMAP_SERIAL_WAKE=y
 CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
 
 #
 # OMAP Board Type
 #
-# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
 # CONFIG_MACH_OMAP_LDP is not set
-CONFIG_MACH_OMAP_ZOOM2=y
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_OMAP3EVM is not set
+# CONFIG_MACH_OMAP3_BEAGLE is not set
 # CONFIG_MACH_OVERO is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+# CONFIG_MACH_OMAP3_PANDORA is not set
+CONFIG_MACH_OMAP_ZOOM2=y
 
 #
 # Processor Type
@@ -239,6 +245,10 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_BPREDICT_DISABLE is not set
 CONFIG_HAS_TLS_REG=y
 # CONFIG_OUTER_CACHE is not set
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
 
 #
 # Bus support
@@ -254,26 +264,32 @@ CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=128
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
 
@@ -287,9 +303,10 @@ CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.16
 # CONFIG_KEXEC is not set
 
 #
-# CPU Frequency scaling
+# CPU Power Management
 #
 # CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
 
 #
 # Floating point emulation
@@ -309,13 +326,23 @@ CONFIG_VFPv3=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
 
 #
 # Power management options
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM_VERBOSE=y
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
@@ -378,7 +405,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -389,8 +418,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -416,14 +445,28 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_OMAP_STI is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -461,14 +504,20 @@ CONFIG_SCSI_WAIT_SCAN=m
 #
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -501,8 +550,10 @@ CONFIG_MII=y
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
 # CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -519,7 +570,10 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 
 #
 # USB Network Adapters
@@ -561,17 +615,25 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TSC2005 is not set
+# CONFIG_TOUCHSCREEN_TSC210X is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -607,13 +669,15 @@ CONFIG_SERIAL_8250_RSA=y
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
@@ -639,6 +703,7 @@ CONFIG_I2C_OMAP=y
 #
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
 
 #
 # Other I2C/SMBus bus drivers
@@ -650,14 +715,11 @@ CONFIG_I2C_OMAP=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_MADC is not set
+# CONFIG_TWL4030_POWEROFF is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -672,12 +734,12 @@ CONFIG_SPI_MASTER=y
 # SPI Master Controller Drivers
 #
 # CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
 
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
@@ -685,12 +747,17 @@ CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
 # CONFIG_GPIO_SYSFS is not set
 
+#
+# Memory mapped GPIO expanders:
+#
+
 #
 # I2C GPIO expanders:
 #
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
 
 #
 # PCI GPIO expanders:
@@ -702,26 +769,34 @@ CONFIG_GPIOLIB=y
 # CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
 CONFIG_W1=y
+CONFIG_W1_CON=y
 
 #
 # 1-wire Bus Masters
 #
+# CONFIG_W1_MASTER_DS2490 is not set
 # CONFIG_W1_MASTER_DS2482 is not set
 # CONFIG_W1_MASTER_DS1WM is not set
 # CONFIG_W1_MASTER_GPIO is not set
+# CONFIG_HDQ_MASTER_OMAP is not set
 
 #
 # 1-wire Slaves
 #
 # CONFIG_W1_SLAVE_THERM is not set
 # CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
 # CONFIG_W1_SLAVE_DS2433 is not set
 # CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
 CONFIG_POWER_SUPPLY=y
 # CONFIG_POWER_SUPPLY_DEBUG is not set
 # CONFIG_PDA_POWER is not set
 # CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
 
@@ -729,11 +804,17 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_OMAP_WATCHDOG is not set
 
 #
-# Sonics Silicon Backplane
+# USB-based Watchdog Cards
 #
+# CONFIG_USBPCWATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
 # CONFIG_SSB is not set
 
 #
@@ -741,12 +822,19 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_T7L66XB is not set
 # CONFIG_MFD_TC6387XB is not set
 # CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 
 #
 # Multimedia devices
@@ -756,12 +844,14 @@ CONFIG_SSB_POSSIBLE=y
 # Multimedia core support
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
 # CONFIG_VIDEO_MEDIA is not set
 
 #
 # Multimedia drivers
 #
 CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
@@ -782,10 +872,12 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=y
 # CONFIG_SND_SEQUENCER is not set
 # CONFIG_SND_MIXER_OSS is not set
 # CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
 # CONFIG_SND_DYNAMIC_MINORS is not set
 CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
@@ -798,19 +890,197 @@ CONFIG_SND_DRIVERS=y
 # CONFIG_SND_MPU401 is not set
 CONFIG_SND_ARM=y
 CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
 # CONFIG_SND_SOC is not set
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
-# CONFIG_USB_SUPPORT is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+CONFIG_USB_MUSB_DEBUG=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DEBUG=y
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=y
+# CONFIG_USB_ZERO_HNPTEST is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
 #
 CONFIG_MMC_BLOCK=y
 CONFIG_MMC_BLOCK_BOUNCE=y
@@ -818,11 +1088,13 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_MMC_TEST is not set
 
 #
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
 # CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -852,43 +1124,55 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_TWL4030 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
 # CONFIG_RTC_DRV_M41T94 is not set
 # CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
 # CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
 # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
 # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
 # CONFIG_REGULATOR_BQ24022 is not set
+CONFIG_REGULATOR_TWL4030=y
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
 
 #
 # File systems
@@ -897,18 +1181,24 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
 CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
 # CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
 CONFIG_QUOTACTL=y
@@ -916,6 +1206,11 @@ CONFIG_QUOTACTL=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -937,15 +1232,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -954,6 +1247,7 @@ CONFIG_TMPFS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -962,6 +1256,7 @@ CONFIG_TMPFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -975,7 +1270,6 @@ CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1045,6 +1339,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
@@ -1062,6 +1357,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1084,21 +1382,36 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
 # CONFIG_DEBUG_USER is not set
 # CONFIG_DEBUG_ERRORS is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1110,17 +1423,28 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1152,7 +1476,7 @@ CONFIG_CRYPTO_PCBC=m
 #
 # Digest
 #
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1189,15 +1513,21 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1205,7 +1535,9 @@ CONFIG_CRC_T10DIF=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
-- 
cgit v1.2.3


From bd04e46558380aaba0caab6325c07a3c6bf27706 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <felipe.balbi@nokia.com>
Date: Fri, 28 Aug 2009 11:24:15 -0700
Subject: OMAP3: beagle: add missing twl4030 usb platform_data

without it twl4030_usb driver will not probe.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-omap3beagle.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 201360781ac..d79ea8da627 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -245,11 +245,16 @@ static struct regulator_init_data beagle_vpll2 = {
 	.consumer_supplies	= &beagle_vdvi_supply,
 };
 
+static struct twl4030_usb_data beagle_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
 static struct twl4030_platform_data beagle_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
 
 	/* platform_data for children goes here */
+	.usb		= &beagle_usb_data,
 	.gpio		= &beagle_gpio_data,
 	.vmmc1		= &beagle_vmmc1,
 	.vsim		= &beagle_vsim,
-- 
cgit v1.2.3


From 36d568ec055cb3ac4507d38ebabba955cdbb443e Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Fri, 28 Aug 2009 11:24:17 -0700
Subject: OMAP3: update OMAP3 Beagle defconfig

Update the OMAP3 Beagle defconfig to add EHCI, MMC, TWL4030 GPIO support.
Beagle can again use MMC rootfs after this patch.  Tested on BeagleBoard
rev C2.

Patch updated to enable PM and OTG options as suggested by
Eric Witcher <ewitcher@mindspring.com>.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Jason Kridner <jkridner@beagleboard.org>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/configs/omap3_beagle_defconfig | 41 +++++++++++++++++++++++++--------
 1 file changed, 32 insertions(+), 9 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/configs/omap3_beagle_defconfig b/arch/arm/configs/omap3_beagle_defconfig
index 4c6fb7e959d..51c0fa8897c 100644
--- a/arch/arm/configs/omap3_beagle_defconfig
+++ b/arch/arm/configs/omap3_beagle_defconfig
@@ -128,6 +128,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # System Type
@@ -236,6 +237,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_BPREDICT_DISABLE is not set
 CONFIG_HAS_TLS_REG=y
 # CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
 
 #
 # Bus support
@@ -317,7 +319,12 @@ CONFIG_BINFMT_MISC=y
 #
 # Power management options
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
@@ -713,6 +720,7 @@ CONFIG_GPIOLIB=y
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
 
 #
 # PCI GPIO expanders:
@@ -741,6 +749,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+CONFIG_TWL4030_CORE=y
 # CONFIG_UCB1400_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_T7L66XB is not set
@@ -787,7 +796,7 @@ CONFIG_DUMMY_CONSOLE=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
 # CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
@@ -798,7 +807,8 @@ CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
@@ -806,6 +816,8 @@ CONFIG_USB_MON=y
 #
 # USB Host Controller Drivers
 #
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
@@ -818,10 +830,10 @@ CONFIG_USB_MUSB_SOC=y
 #
 # OMAP 343x high speed USB support
 #
-CONFIG_USB_MUSB_HOST=y
+# CONFIG_USB_MUSB_HOST is not set
 # CONFIG_USB_MUSB_PERIPHERAL is not set
-# CONFIG_USB_MUSB_OTG is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
 CONFIG_USB_MUSB_HDRC_HCD=y
 # CONFIG_MUSB_PIO_ONLY is not set
 CONFIG_USB_INVENTRA_DMA=y
@@ -887,8 +899,8 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_PXA25X is not set
-CONFIG_USB_GADGET_M66592=y
-CONFIG_USB_M66592=y
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_M66592 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
@@ -906,6 +918,15 @@ CONFIG_USB_ETH_RNDIS=y
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
 # CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
@@ -923,6 +944,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 #
 # CONFIG_MMC_SDHCI is not set
 # CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
@@ -981,10 +1003,11 @@ CONFIG_RTC_INTF_DEV=y
 #
 # Voltage and Current regulators
 #
-# CONFIG_REGULATOR is not set
+CONFIG_REGULATOR=y
 # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
 # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
 # CONFIG_REGULATOR_BQ24022 is not set
+CONFIG_REGULATOR_TWL4030=y
 # CONFIG_UIO is not set
 
 #
-- 
cgit v1.2.3


From ad283ea4a3ce82cda2efe33163748a397b31b1eb Mon Sep 17 00:00:00 2001
From: Dan Williams <dan.j.williams@intel.com>
Date: Sat, 29 Aug 2009 19:09:26 -0700
Subject: async_tx: add sum check flags

Replace the flat zero_sum_result with a collection of flags to contain
the P (xor) zero-sum result, and the soon to be utilized Q (raid6 reed
solomon syndrome) zero-sum result.  Use the SUM_CHECK_ namespace instead
of DMA_ since these flags will be used on non-dma-zero-sum enabled
platforms.

Reviewed-by: Andre Noll <maan@systemlinux.org>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 arch/arm/include/asm/hardware/iop3xx-adma.h |  5 +++--
 arch/arm/mach-iop13xx/include/mach/adma.h   | 12 +++++++-----
 2 files changed, 10 insertions(+), 7 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/hardware/iop3xx-adma.h b/arch/arm/include/asm/hardware/iop3xx-adma.h
index 83e6ba338e2..26eefea0231 100644
--- a/arch/arm/include/asm/hardware/iop3xx-adma.h
+++ b/arch/arm/include/asm/hardware/iop3xx-adma.h
@@ -756,13 +756,14 @@ static inline void iop_desc_set_block_fill_val(struct iop_adma_desc_slot *desc,
 	hw_desc->src[0] = val;
 }
 
-static inline int iop_desc_get_zero_result(struct iop_adma_desc_slot *desc)
+static inline enum sum_check_flags
+iop_desc_get_zero_result(struct iop_adma_desc_slot *desc)
 {
 	struct iop3xx_desc_aau *hw_desc = desc->hw_desc;
 	struct iop3xx_aau_desc_ctrl desc_ctrl = hw_desc->desc_ctrl_field;
 
 	iop_paranoia(!(desc_ctrl.tx_complete && desc_ctrl.zero_result_en));
-	return desc_ctrl.zero_result_err;
+	return desc_ctrl.zero_result_err << SUM_CHECK_P;
 }
 
 static inline void iop_chan_append(struct iop_adma_chan *chan)
diff --git a/arch/arm/mach-iop13xx/include/mach/adma.h b/arch/arm/mach-iop13xx/include/mach/adma.h
index 5722e86f217..1cd31df8924 100644
--- a/arch/arm/mach-iop13xx/include/mach/adma.h
+++ b/arch/arm/mach-iop13xx/include/mach/adma.h
@@ -428,18 +428,20 @@ static inline void iop_desc_set_block_fill_val(struct iop_adma_desc_slot *desc,
 	hw_desc->block_fill_data = val;
 }
 
-static inline int iop_desc_get_zero_result(struct iop_adma_desc_slot *desc)
+static inline enum sum_check_flags
+iop_desc_get_zero_result(struct iop_adma_desc_slot *desc)
 {
 	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
 	struct iop13xx_adma_desc_ctrl desc_ctrl = hw_desc->desc_ctrl_field;
 	struct iop13xx_adma_byte_count byte_count = hw_desc->byte_count_field;
+	enum sum_check_flags flags;
 
 	BUG_ON(!(byte_count.tx_complete && desc_ctrl.zero_result));
 
-	if (desc_ctrl.pq_xfer_en)
-		return byte_count.zero_result_err_q;
-	else
-		return byte_count.zero_result_err;
+	flags = byte_count.zero_result_err_q << SUM_CHECK_Q;
+	flags |= byte_count.zero_result_err << SUM_CHECK_P;
+
+	return flags;
 }
 
 static inline void iop_chan_append(struct iop_adma_chan *chan)
-- 
cgit v1.2.3


From b2f46fd8ef3dff2ab30f31126833f78b7480283a Mon Sep 17 00:00:00 2001
From: Dan Williams <dan.j.williams@intel.com>
Date: Tue, 14 Jul 2009 12:20:36 -0700
Subject: async_tx: add support for asynchronous GF multiplication

[ Based on an original patch by Yuri Tikhonov ]

This adds support for doing asynchronous GF multiplication by adding
two additional functions to the async_tx API:

 async_gen_syndrome() does simultaneous XOR and Galois field
    multiplication of sources.

 async_syndrome_val() validates the given source buffers against known P
    and Q values.

When a request is made to run async_pq against more than the hardware
maximum number of supported sources we need to reuse the previous
generated P and Q values as sources into the next operation.  Care must
be taken to remove Q from P' and P from Q'.  For example to perform a 5
source pq op with hardware that only supports 4 sources at a time the
following approach is taken:

p, q = PQ(src0, src1, src2, src3, COEF({01}, {02}, {04}, {08}))
p', q' = PQ(p, q, q, src4, COEF({00}, {01}, {00}, {10}))

p' = p + q + q + src4 = p + src4
q' = {00}*p + {01}*q + {00}*q + {10}*src4 = q + {10}*src4

Note: 4 is the minimum acceptable maxpq otherwise we punt to
synchronous-software path.

The DMA_PREP_CONTINUE flag indicates to the driver to reuse p and q as
sources (in the above manner) and fill the remaining slots up to maxpq
with the new sources/coefficients.

Note1: Some devices have native support for P+Q continuation and can skip
this extra work.  Devices with this capability can advertise it with
dma_set_maxpq.  It is up to each driver how to handle the
DMA_PREP_CONTINUE flag.

Note2: The api supports disabling the generation of P when generating Q,
this is ignored by the synchronous path but is implemented by some dma
devices to save unnecessary writes.  In this case the continuation
algorithm is simplified to only reuse Q as a source.

Cc: H. Peter Anvin <hpa@zytor.com>
Cc: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Reviewed-by: Andre Noll <maan@systemlinux.org>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 arch/arm/mach-iop13xx/setup.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c
index 9800228b71d..2e7ca0d75f8 100644
--- a/arch/arm/mach-iop13xx/setup.c
+++ b/arch/arm/mach-iop13xx/setup.c
@@ -506,7 +506,7 @@ void __init iop13xx_platform_init(void)
 			dma_cap_set(DMA_MEMSET, plat_data->cap_mask);
 			dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask);
 			dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask);
-			dma_cap_set(DMA_PQ_XOR, plat_data->cap_mask);
+			dma_cap_set(DMA_PQ, plat_data->cap_mask);
 			dma_cap_set(DMA_PQ_UPDATE, plat_data->cap_mask);
 			dma_cap_set(DMA_PQ_VAL, plat_data->cap_mask);
 			break;
-- 
cgit v1.2.3


From 7bf649aee8ac93ecc280f8745dcf8ec19d7b9fb1 Mon Sep 17 00:00:00 2001
From: Dan Williams <dan.j.williams@intel.com>
Date: Fri, 28 Aug 2009 14:32:04 -0700
Subject: iop-adma: P+Q support for iop13xx adma engines

iop33x support is not included because that engine is a bit more awkward
to handle in that it can either be in xor mode or pq mode.  The
dmaengine/async_tx layers currently only comprehend static capabilities.

Note iop13xx does not support hardware PQ continuation so the driver
must handle the DMA_PREP_CONTINUE flag for operations across > 16
sources. From the comment for dma_maxpq:

/* When an engine does not support native continuation we need 3 extra
 * source slots to reuse P and Q with the following coefficients:
 * 1/ {00} * P : remove P from Q', but use it as a source for P'
 * 2/ {01} * Q : use Q to continue Q' calculation
 * 3/ {00} * Q : subtract Q from P' to cancel (2)
 */

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 arch/arm/include/asm/hardware/iop3xx-adma.h |  76 ++++++++++++++++++++
 arch/arm/include/asm/hardware/iop_adma.h    |   1 +
 arch/arm/mach-iop13xx/include/mach/adma.h   | 107 ++++++++++++++++++++++++++++
 3 files changed, 184 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/hardware/iop3xx-adma.h b/arch/arm/include/asm/hardware/iop3xx-adma.h
index 26eefea0231..1a8c7279a28 100644
--- a/arch/arm/include/asm/hardware/iop3xx-adma.h
+++ b/arch/arm/include/asm/hardware/iop3xx-adma.h
@@ -187,11 +187,74 @@ union iop3xx_desc {
 	void *ptr;
 };
 
+/* No support for p+q operations */
+static inline int
+iop_chan_pq_slot_count(size_t len, int src_cnt, int *slots_per_op)
+{
+	BUG();
+	return 0;
+}
+
+static inline void
+iop_desc_init_pq(struct iop_adma_desc_slot *desc, int src_cnt,
+		  unsigned long flags)
+{
+	BUG();
+}
+
+static inline void
+iop_desc_set_pq_addr(struct iop_adma_desc_slot *desc, dma_addr_t *addr)
+{
+	BUG();
+}
+
+static inline void
+iop_desc_set_pq_src_addr(struct iop_adma_desc_slot *desc, int src_idx,
+			 dma_addr_t addr, unsigned char coef)
+{
+	BUG();
+}
+
+static inline int
+iop_chan_pq_zero_sum_slot_count(size_t len, int src_cnt, int *slots_per_op)
+{
+	BUG();
+	return 0;
+}
+
+static inline void
+iop_desc_init_pq_zero_sum(struct iop_adma_desc_slot *desc, int src_cnt,
+			  unsigned long flags)
+{
+	BUG();
+}
+
+static inline void
+iop_desc_set_pq_zero_sum_byte_count(struct iop_adma_desc_slot *desc, u32 len)
+{
+	BUG();
+}
+
+#define iop_desc_set_pq_zero_sum_src_addr iop_desc_set_pq_src_addr
+
+static inline void
+iop_desc_set_pq_zero_sum_addr(struct iop_adma_desc_slot *desc, int pq_idx,
+			      dma_addr_t *src)
+{
+	BUG();
+}
+
 static inline int iop_adma_get_max_xor(void)
 {
 	return 32;
 }
 
+static inline int iop_adma_get_max_pq(void)
+{
+	BUG();
+	return 0;
+}
+
 static inline u32 iop_chan_get_current_descriptor(struct iop_adma_chan *chan)
 {
 	int id = chan->device->id;
@@ -332,6 +395,11 @@ static inline int iop_chan_zero_sum_slot_count(size_t len, int src_cnt,
 	return slot_cnt;
 }
 
+static inline int iop_desc_is_pq(struct iop_adma_desc_slot *desc)
+{
+	return 0;
+}
+
 static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc,
 					struct iop_adma_chan *chan)
 {
@@ -349,6 +417,14 @@ static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc,
 	return 0;
 }
 
+
+static inline u32 iop_desc_get_qdest_addr(struct iop_adma_desc_slot *desc,
+					  struct iop_adma_chan *chan)
+{
+	BUG();
+	return 0;
+}
+
 static inline u32 iop_desc_get_byte_count(struct iop_adma_desc_slot *desc,
 					struct iop_adma_chan *chan)
 {
diff --git a/arch/arm/include/asm/hardware/iop_adma.h b/arch/arm/include/asm/hardware/iop_adma.h
index 385c6e8cbbd..bbe8a0475ca 100644
--- a/arch/arm/include/asm/hardware/iop_adma.h
+++ b/arch/arm/include/asm/hardware/iop_adma.h
@@ -106,6 +106,7 @@ struct iop_adma_desc_slot {
 	union {
 		u32 *xor_check_result;
 		u32 *crc32_result;
+		u32 *pq_check_result;
 	};
 };
 
diff --git a/arch/arm/mach-iop13xx/include/mach/adma.h b/arch/arm/mach-iop13xx/include/mach/adma.h
index 1cd31df8924..6d3782d85a9 100644
--- a/arch/arm/mach-iop13xx/include/mach/adma.h
+++ b/arch/arm/mach-iop13xx/include/mach/adma.h
@@ -150,6 +150,8 @@ static inline int iop_adma_get_max_xor(void)
 	return 16;
 }
 
+#define iop_adma_get_max_pq iop_adma_get_max_xor
+
 static inline u32 iop_chan_get_current_descriptor(struct iop_adma_chan *chan)
 {
 	return __raw_readl(ADMA_ADAR(chan));
@@ -211,7 +213,10 @@ iop_chan_xor_slot_count(size_t len, int src_cnt, int *slots_per_op)
 #define IOP_ADMA_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
 #define IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
 #define IOP_ADMA_XOR_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
+#define IOP_ADMA_PQ_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
 #define iop_chan_zero_sum_slot_count(l, s, o) iop_chan_xor_slot_count(l, s, o)
+#define iop_chan_pq_slot_count iop_chan_xor_slot_count
+#define iop_chan_pq_zero_sum_slot_count iop_chan_xor_slot_count
 
 static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc,
 					struct iop_adma_chan *chan)
@@ -220,6 +225,13 @@ static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc,
 	return hw_desc->dest_addr;
 }
 
+static inline u32 iop_desc_get_qdest_addr(struct iop_adma_desc_slot *desc,
+					  struct iop_adma_chan *chan)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	return hw_desc->q_dest_addr;
+}
+
 static inline u32 iop_desc_get_byte_count(struct iop_adma_desc_slot *desc,
 					struct iop_adma_chan *chan)
 {
@@ -319,6 +331,58 @@ iop_desc_init_zero_sum(struct iop_adma_desc_slot *desc, int src_cnt,
 	return 1;
 }
 
+static inline void
+iop_desc_init_pq(struct iop_adma_desc_slot *desc, int src_cnt,
+		  unsigned long flags)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	union {
+		u32 value;
+		struct iop13xx_adma_desc_ctrl field;
+	} u_desc_ctrl;
+
+	u_desc_ctrl.value = 0;
+	u_desc_ctrl.field.src_select = src_cnt - 1;
+	u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
+	u_desc_ctrl.field.pq_xfer_en = 1;
+	u_desc_ctrl.field.p_xfer_dis = !!(flags & DMA_PREP_PQ_DISABLE_P);
+	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
+	hw_desc->desc_ctrl = u_desc_ctrl.value;
+}
+
+static inline int iop_desc_is_pq(struct iop_adma_desc_slot *desc)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	union {
+		u32 value;
+		struct iop13xx_adma_desc_ctrl field;
+	} u_desc_ctrl;
+
+	u_desc_ctrl.value = hw_desc->desc_ctrl;
+	return u_desc_ctrl.field.pq_xfer_en;
+}
+
+static inline void
+iop_desc_init_pq_zero_sum(struct iop_adma_desc_slot *desc, int src_cnt,
+			  unsigned long flags)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	union {
+		u32 value;
+		struct iop13xx_adma_desc_ctrl field;
+	} u_desc_ctrl;
+
+	u_desc_ctrl.value = 0;
+	u_desc_ctrl.field.src_select = src_cnt - 1;
+	u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
+	u_desc_ctrl.field.zero_result = 1;
+	u_desc_ctrl.field.status_write_back_en = 1;
+	u_desc_ctrl.field.pq_xfer_en = 1;
+	u_desc_ctrl.field.p_xfer_dis = !!(flags & DMA_PREP_PQ_DISABLE_P);
+	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
+	hw_desc->desc_ctrl = u_desc_ctrl.value;
+}
+
 static inline void iop_desc_set_byte_count(struct iop_adma_desc_slot *desc,
 					struct iop_adma_chan *chan,
 					u32 byte_count)
@@ -351,6 +415,7 @@ iop_desc_set_zero_sum_byte_count(struct iop_adma_desc_slot *desc, u32 len)
 	}
 }
 
+#define iop_desc_set_pq_zero_sum_byte_count iop_desc_set_zero_sum_byte_count
 
 static inline void iop_desc_set_dest_addr(struct iop_adma_desc_slot *desc,
 					struct iop_adma_chan *chan,
@@ -361,6 +426,16 @@ static inline void iop_desc_set_dest_addr(struct iop_adma_desc_slot *desc,
 	hw_desc->upper_dest_addr = 0;
 }
 
+static inline void
+iop_desc_set_pq_addr(struct iop_adma_desc_slot *desc, dma_addr_t *addr)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+
+	hw_desc->dest_addr = addr[0];
+	hw_desc->q_dest_addr = addr[1];
+	hw_desc->upper_dest_addr = 0;
+}
+
 static inline void iop_desc_set_memcpy_src_addr(struct iop_adma_desc_slot *desc,
 					dma_addr_t addr)
 {
@@ -388,6 +463,29 @@ static inline void iop_desc_set_xor_src_addr(struct iop_adma_desc_slot *desc,
 	} while (slot_cnt);
 }
 
+static inline void
+iop_desc_set_pq_src_addr(struct iop_adma_desc_slot *desc, int src_idx,
+			 dma_addr_t addr, unsigned char coef)
+{
+	int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op;
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc, *iter;
+	struct iop13xx_adma_src *src;
+	int i = 0;
+
+	do {
+		iter = iop_hw_desc_slot_idx(hw_desc, i);
+		src = &iter->src[src_idx];
+		src->src_addr = addr;
+		src->pq_upper_src_addr = 0;
+		src->pq_dmlt = coef;
+		slot_cnt -= slots_per_op;
+		if (slot_cnt) {
+			i += slots_per_op;
+			addr += IOP_ADMA_PQ_MAX_BYTE_COUNT;
+		}
+	} while (slot_cnt);
+}
+
 static inline void
 iop_desc_init_interrupt(struct iop_adma_desc_slot *desc,
 	struct iop_adma_chan *chan)
@@ -399,6 +497,15 @@ iop_desc_init_interrupt(struct iop_adma_desc_slot *desc,
 }
 
 #define iop_desc_set_zero_sum_src_addr iop_desc_set_xor_src_addr
+#define iop_desc_set_pq_zero_sum_src_addr iop_desc_set_pq_src_addr
+
+static inline void
+iop_desc_set_pq_zero_sum_addr(struct iop_adma_desc_slot *desc, int pq_idx,
+			      dma_addr_t *src)
+{
+	iop_desc_set_xor_src_addr(desc, pq_idx, src[pq_idx]);
+	iop_desc_set_xor_src_addr(desc, pq_idx+1, src[pq_idx+1]);
+}
 
 static inline void iop_desc_set_next_desc(struct iop_adma_desc_slot *desc,
 					u32 next_desc_addr)
-- 
cgit v1.2.3


From 98b0979f025e5b98ce8f24e6dc0f9713e6f6c88c Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Thu, 9 Jul 2009 15:17:41 +0100
Subject: MMC: MMCI: convert realview MMC to use gpiolib

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-realview/core.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 17a07e6acfa..ab615e78b79 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -222,6 +222,9 @@ arch_initcall(realview_i2c_init);
 
 #define REALVIEW_SYSMCI	(__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET)
 
+/*
+ * This is only used if GPIOLIB support is disabled
+ */
 static unsigned int realview_mmc_status(struct device *dev)
 {
 	struct amba_device *adev = container_of(dev, struct amba_device, dev);
@@ -238,15 +241,15 @@ static unsigned int realview_mmc_status(struct device *dev)
 struct mmc_platform_data realview_mmc0_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= realview_mmc_status,
-	.gpio_wp	= -1,
-	.gpio_cd	= -1,
+	.gpio_wp	= 17,
+	.gpio_cd	= 16,
 };
 
 struct mmc_platform_data realview_mmc1_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= realview_mmc_status,
-	.gpio_wp	= -1,
-	.gpio_cd	= -1,
+	.gpio_wp	= 19,
+	.gpio_cd	= 18,
 };
 
 /*
-- 
cgit v1.2.3


From 35c9221acb133ecc9abd701a1fb6fa909d177a77 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Fri, 21 Aug 2009 07:07:46 +0100
Subject: ARM: 5682/1: Add cpu.c and dev.c and modify some files of w90p910
 platform

Add the cpu.c and dev.c and modify w90p910 platform
to apply to use the common API(provided by cpu.c and dev.c)
at the same time, I renamed all w90x900 to nuc900 in every
c file of w90x900 platform and touchscreen's driver name.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/Makefile          |   8 +-
 arch/arm/mach-w90x900/clksel.c          |  12 +-
 arch/arm/mach-w90x900/clock.c           |   4 +-
 arch/arm/mach-w90x900/clock.h           |   8 +-
 arch/arm/mach-w90x900/cpu.c             | 212 +++++++++++++++++
 arch/arm/mach-w90x900/cpu.h             |  50 ++--
 arch/arm/mach-w90x900/dev.c             | 389 ++++++++++++++++++++++++++++++
 arch/arm/mach-w90x900/gpio.c            |  78 +++---
 arch/arm/mach-w90x900/irq.c             |  30 +--
 arch/arm/mach-w90x900/mach-nuc910evb.c  |  44 ++++
 arch/arm/mach-w90x900/mach-w90p910evb.c | 407 --------------------------------
 arch/arm/mach-w90x900/mfp-w90p910.c     | 158 -------------
 arch/arm/mach-w90x900/mfp.c             | 158 +++++++++++++
 arch/arm/mach-w90x900/nuc910.c          |  60 +++++
 arch/arm/mach-w90x900/nuc910.h          |  28 +++
 arch/arm/mach-w90x900/time.c            |  70 +++---
 arch/arm/mach-w90x900/w90p910.c         | 224 ------------------
 17 files changed, 1021 insertions(+), 919 deletions(-)
 create mode 100644 arch/arm/mach-w90x900/cpu.c
 create mode 100644 arch/arm/mach-w90x900/dev.c
 create mode 100644 arch/arm/mach-w90x900/mach-nuc910evb.c
 delete mode 100644 arch/arm/mach-w90x900/mach-w90p910evb.c
 delete mode 100644 arch/arm/mach-w90x900/mfp-w90p910.c
 create mode 100644 arch/arm/mach-w90x900/mfp.c
 create mode 100644 arch/arm/mach-w90x900/nuc910.c
 create mode 100644 arch/arm/mach-w90x900/nuc910.h
 delete mode 100644 arch/arm/mach-w90x900/w90p910.c

(limited to 'arch/arm')

diff --git a/arch/arm/mach-w90x900/Makefile b/arch/arm/mach-w90x900/Makefile
index 3ccd625455c..e38aa328e60 100644
--- a/arch/arm/mach-w90x900/Makefile
+++ b/arch/arm/mach-w90x900/Makefile
@@ -4,12 +4,12 @@
 
 # Object file lists.
 
-obj-y				:= irq.o time.o mfp-w90p910.o gpio.o clock.o
-obj-y				+= clksel.o
+obj-y				:= irq.o time.o mfp.o gpio.o clock.o
+obj-y				+= clksel.o dev.o cpu.o
 # W90X900 CPU support files
 
-obj-$(CONFIG_CPU_W90P910)	+= w90p910.o
+obj-$(CONFIG_CPU_W90P910)	+= nuc910.o
 
 # machine support
 
-obj-$(CONFIG_MACH_W90P910EVB)	+= mach-w90p910evb.o
+obj-$(CONFIG_MACH_W90P910EVB)	+= mach-nuc910evb.o
diff --git a/arch/arm/mach-w90x900/clksel.c b/arch/arm/mach-w90x900/clksel.c
index 5a77eb91cb1..3de4a5211c3 100644
--- a/arch/arm/mach-w90x900/clksel.c
+++ b/arch/arm/mach-w90x900/clksel.c
@@ -42,13 +42,13 @@ static void clock_source_select(const char *dev_id, unsigned int clkval)
 
 	clksel = __raw_readl(REG_CLKSEL);
 
-	if (strcmp(dev_id, "w90p910-ms") == 0)
+	if (strcmp(dev_id, "nuc900-ms") == 0)
 		offset = MSOFFSET;
-	else if (strcmp(dev_id, "w90p910-atapi") == 0)
+	else if (strcmp(dev_id, "nuc900-atapi") == 0)
 		offset = ATAOFFSET;
-	else if (strcmp(dev_id, "w90p910-lcd") == 0)
+	else if (strcmp(dev_id, "nuc900-lcd") == 0)
 		offset = LCDOFFSET;
-	else if (strcmp(dev_id, "w90p910-audio") == 0)
+	else if (strcmp(dev_id, "nuc900-audio") == 0)
 		offset = AUDOFFSET;
 	else
 		offset = CPUOFFSET;
@@ -59,7 +59,7 @@ static void clock_source_select(const char *dev_id, unsigned int clkval)
 	__raw_writel(clksel, REG_CLKSEL);
 }
 
-void w90p910_clock_source(struct device *dev, unsigned char *src)
+void nuc900_clock_source(struct device *dev, unsigned char *src)
 {
 	unsigned int clkval;
 	const char *dev_id;
@@ -87,5 +87,5 @@ void w90p910_clock_source(struct device *dev, unsigned char *src)
 
 	mutex_unlock(&clksel_sem);
 }
-EXPORT_SYMBOL(w90p910_clock_source);
+EXPORT_SYMBOL(nuc900_clock_source);
 
diff --git a/arch/arm/mach-w90x900/clock.c b/arch/arm/mach-w90x900/clock.c
index 70b67109637..b785994bab0 100644
--- a/arch/arm/mach-w90x900/clock.c
+++ b/arch/arm/mach-w90x900/clock.c
@@ -61,7 +61,7 @@ unsigned long clk_get_rate(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_rate);
 
-void w90x900_clk_enable(struct clk *clk, int enable)
+void nuc900_clk_enable(struct clk *clk, int enable)
 {
 	unsigned int clocks = clk->cken;
 	unsigned long clken;
@@ -76,7 +76,7 @@ void w90x900_clk_enable(struct clk *clk, int enable)
 	__raw_writel(clken, W90X900_VA_CLKPWR);
 }
 
-void w90x900_subclk_enable(struct clk *clk, int enable)
+void nuc900_subclk_enable(struct clk *clk, int enable)
 {
 	unsigned int clocks = clk->cken;
 	unsigned long clken;
diff --git a/arch/arm/mach-w90x900/clock.h b/arch/arm/mach-w90x900/clock.h
index d2f0e50a70b..f5816a06eed 100644
--- a/arch/arm/mach-w90x900/clock.h
+++ b/arch/arm/mach-w90x900/clock.h
@@ -12,8 +12,8 @@
 
 #include <asm/clkdev.h>
 
-void w90x900_clk_enable(struct clk *clk, int enable);
-void w90x900_subclk_enable(struct clk *clk, int enable);
+void nuc900_clk_enable(struct clk *clk, int enable);
+void nuc900_subclk_enable(struct clk *clk, int enable);
 void clks_register(struct clk_lookup *clks, size_t num);
 
 struct clk {
@@ -24,13 +24,13 @@ struct clk {
 
 #define DEFINE_CLK(_name, _ctrlbit)			\
 struct clk clk_##_name = {				\
-		.enable	= w90x900_clk_enable,		\
+		.enable	= nuc900_clk_enable,		\
 		.cken	= (1 << _ctrlbit),		\
 	}
 
 #define DEFINE_SUBCLK(_name, _ctrlbit)			\
 struct clk clk_##_name = {				\
-		.enable	= w90x900_subclk_enable,	\
+		.enable	= nuc900_subclk_enable,	\
 		.cken	= (1 << _ctrlbit),		\
 	}
 
diff --git a/arch/arm/mach-w90x900/cpu.c b/arch/arm/mach-w90x900/cpu.c
new file mode 100644
index 00000000000..921cef991bf
--- /dev/null
+++ b/arch/arm/mach-w90x900/cpu.c
@@ -0,0 +1,212 @@
+/*
+ * linux/arch/arm/mach-w90x900/cpu.c
+ *
+ * Copyright (c) 2009 Nuvoton corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC900 series cpu common support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/serial_8250.h>
+#include <linux/delay.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-serial.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-ebi.h>
+
+#include "cpu.h"
+#include "clock.h"
+
+/* Initial IO mappings */
+
+static struct map_desc nuc900_iodesc[] __initdata = {
+	IODESC_ENT(IRQ),
+	IODESC_ENT(GCR),
+	IODESC_ENT(UART),
+	IODESC_ENT(TIMER),
+	IODESC_ENT(EBI),
+};
+
+/* Initial clock declarations. */
+static DEFINE_CLK(lcd, 0);
+static DEFINE_CLK(audio, 1);
+static DEFINE_CLK(fmi, 4);
+static DEFINE_SUBCLK(ms, 0);
+static DEFINE_SUBCLK(sd, 1);
+static DEFINE_CLK(dmac, 5);
+static DEFINE_CLK(atapi, 6);
+static DEFINE_CLK(emc, 7);
+static DEFINE_SUBCLK(rmii, 2);
+static DEFINE_CLK(usbd, 8);
+static DEFINE_CLK(usbh, 9);
+static DEFINE_CLK(g2d, 10);;
+static DEFINE_CLK(pwm, 18);
+static DEFINE_CLK(ps2, 24);
+static DEFINE_CLK(kpi, 25);
+static DEFINE_CLK(wdt, 26);
+static DEFINE_CLK(gdma, 27);
+static DEFINE_CLK(adc, 28);
+static DEFINE_CLK(usi, 29);
+static DEFINE_CLK(ext, 0);
+
+static struct clk_lookup nuc900_clkregs[] = {
+	DEF_CLKLOOK(&clk_lcd, "nuc900-lcd", NULL),
+	DEF_CLKLOOK(&clk_audio, "nuc900-audio", NULL),
+	DEF_CLKLOOK(&clk_fmi, "nuc900-fmi", NULL),
+	DEF_CLKLOOK(&clk_ms, "nuc900-fmi", "MS"),
+	DEF_CLKLOOK(&clk_sd, "nuc900-fmi", "SD"),
+	DEF_CLKLOOK(&clk_dmac, "nuc900-dmac", NULL),
+	DEF_CLKLOOK(&clk_atapi, "nuc900-atapi", NULL),
+	DEF_CLKLOOK(&clk_emc, "nuc900-emc", NULL),
+	DEF_CLKLOOK(&clk_rmii, "nuc900-emc", "RMII"),
+	DEF_CLKLOOK(&clk_usbd, "nuc900-usbd", NULL),
+	DEF_CLKLOOK(&clk_usbh, "nuc900-usbh", NULL),
+	DEF_CLKLOOK(&clk_g2d, "nuc900-g2d", NULL),
+	DEF_CLKLOOK(&clk_pwm, "nuc900-pwm", NULL),
+	DEF_CLKLOOK(&clk_ps2, "nuc900-ps2", NULL),
+	DEF_CLKLOOK(&clk_kpi, "nuc900-kpi", NULL),
+	DEF_CLKLOOK(&clk_wdt, "nuc900-wdt", NULL),
+	DEF_CLKLOOK(&clk_gdma, "nuc900-gdma", NULL),
+	DEF_CLKLOOK(&clk_adc, "nuc900-adc", NULL),
+	DEF_CLKLOOK(&clk_usi, "nuc900-spi", NULL),
+	DEF_CLKLOOK(&clk_ext, NULL, "ext"),
+};
+
+/* Initial serial platform data */
+
+struct plat_serial8250_port nuc900_uart_data[] = {
+	NUC900_8250PORT(UART0),
+};
+
+struct platform_device nuc900_serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= nuc900_uart_data,
+	},
+};
+
+/*Set NUC900 series cpu frequence*/
+static int __init nuc900_set_clkval(unsigned int cpufreq)
+{
+	unsigned int pllclk, ahbclk, apbclk, val;
+
+	pllclk = 0;
+	ahbclk = 0;
+	apbclk = 0;
+
+	switch (cpufreq) {
+	case 66:
+		pllclk = PLL_66MHZ;
+		ahbclk = AHB_CPUCLK_1_1;
+		apbclk = APB_AHB_1_2;
+		break;
+
+	case 100:
+		pllclk = PLL_100MHZ;
+		ahbclk = AHB_CPUCLK_1_1;
+		apbclk = APB_AHB_1_2;
+		break;
+
+	case 120:
+		pllclk = PLL_120MHZ;
+		ahbclk = AHB_CPUCLK_1_2;
+		apbclk = APB_AHB_1_2;
+		break;
+
+	case 166:
+		pllclk = PLL_166MHZ;
+		ahbclk = AHB_CPUCLK_1_2;
+		apbclk = APB_AHB_1_2;
+		break;
+
+	case 200:
+		pllclk = PLL_200MHZ;
+		ahbclk = AHB_CPUCLK_1_2;
+		apbclk = APB_AHB_1_2;
+		break;
+	}
+
+	__raw_writel(pllclk, REG_PLLCON0);
+
+	val = __raw_readl(REG_CLKDIV);
+	val &= ~(0x03 << 24 | 0x03 << 26);
+	val |= (ahbclk << 24 | apbclk << 26);
+	__raw_writel(val, REG_CLKDIV);
+
+	return 	0;
+}
+static int __init nuc900_set_cpufreq(char *str)
+{
+	unsigned long cpufreq, val;
+
+	if (!*str)
+		return 0;
+
+	strict_strtoul(str, 0, &cpufreq);
+
+	nuc900_clock_source(NULL, "ext");
+
+	nuc900_set_clkval(cpufreq);
+
+	mdelay(1);
+
+	val = __raw_readl(REG_CKSKEW);
+	val &= ~0xff;
+	val |= DEFAULTSKEW;
+	__raw_writel(val, REG_CKSKEW);
+
+	nuc900_clock_source(NULL, "pll0");
+
+	return 1;
+}
+
+__setup("cpufreq=", nuc900_set_cpufreq);
+
+/*Init NUC900 evb io*/
+
+void __init nuc900_map_io(struct map_desc *mach_desc, int mach_size)
+{
+	unsigned long idcode = 0x0;
+
+	iotable_init(mach_desc, mach_size);
+	iotable_init(nuc900_iodesc, ARRAY_SIZE(nuc900_iodesc));
+
+	idcode = __raw_readl(NUC900PDID);
+	if (idcode == NUC910_CPUID)
+		printk(KERN_INFO "CPU type 0x%08lx is NUC910\n", idcode);
+	else if (idcode == NUC920_CPUID)
+		printk(KERN_INFO "CPU type 0x%08lx is NUC920\n", idcode);
+	else if (idcode == NUC950_CPUID)
+		printk(KERN_INFO "CPU type 0x%08lx is NUC950\n", idcode);
+	else if (idcode == NUC960_CPUID)
+		printk(KERN_INFO "CPU type 0x%08lx is NUC960\n", idcode);
+}
+
+/*Init NUC900 clock*/
+
+void __init nuc900_init_clocks(void)
+{
+	clks_register(nuc900_clkregs, ARRAY_SIZE(nuc900_clkregs));
+}
+
diff --git a/arch/arm/mach-w90x900/cpu.h b/arch/arm/mach-w90x900/cpu.h
index ddde959d898..4d58ba164e2 100644
--- a/arch/arm/mach-w90x900/cpu.h
+++ b/arch/arm/mach-w90x900/cpu.h
@@ -6,7 +6,7 @@
  * Copyright (c) 2008 Nuvoton technology corporation
  * All rights reserved.
  *
- * Header file for W90X900 CPU support
+ * Header file for NUC900 CPU support
  *
  * Wan ZongShun <mcuos.com@gmail.com>
  *
@@ -24,30 +24,7 @@
        .type    = MT_DEVICE,                           \
 }
 
-/*Cpu identifier register*/
-
-#define W90X900PDID	W90X900_VA_GCR
-#define W90P910_CPUID	0x02900910
-#define W90P920_CPUID	0x02900920
-#define W90P950_CPUID	0x02900950
-#define W90N960_CPUID	0x02900960
-
-struct w90x900_uartcfg;
-struct map_desc;
-struct sys_timer;
-
-/* core initialisation functions */
-
-extern void w90x900_init_irq(void);
-extern void w90p910_init_io(struct map_desc *mach_desc, int size);
-extern void w90p910_init_uarts(struct w90x900_uartcfg *cfg, int no);
-extern void w90p910_init_clocks(void);
-extern void w90p910_map_io(struct map_desc *mach_desc, int size);
-extern struct platform_device w90p910_serial_device;
-extern struct sys_timer w90x900_timer;
-extern void w90p910_clock_source(struct device *dev, unsigned char *src);
-
-#define W90X900_8250PORT(name)					\
+#define NUC900_8250PORT(name)					\
 {								\
 	.membase	= name##_BA,				\
 	.mapbase	= name##_PA,				\
@@ -57,3 +34,26 @@ extern void w90p910_clock_source(struct device *dev, unsigned char *src);
 	.iotype		= UPIO_MEM,				\
 	.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,	\
 }
+
+/*Cpu identifier register*/
+
+#define NUC900PDID	W90X900_VA_GCR
+#define NUC910_CPUID	0x02900910
+#define NUC920_CPUID	0x02900920
+#define NUC950_CPUID	0x02900950
+#define NUC960_CPUID	0x02900960
+
+/* extern file from cpu.c */
+
+extern void nuc900_clock_source(struct device *dev, unsigned char *src);
+extern void nuc900_init_clocks(void);
+extern void nuc900_map_io(struct map_desc *mach_desc, int mach_size);
+extern void nuc900_board_init(struct platform_device **device, int size);
+
+/* for either public between 910 and 920, or between 920 and 950 */
+
+extern struct platform_device nuc900_serial_device;
+extern struct platform_device nuc900_device_fmi;
+extern struct platform_device nuc900_device_kpi;
+extern struct platform_device nuc900_device_rtc;
+extern struct platform_device nuc900_device_ts;
diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c
new file mode 100644
index 00000000000..2a6f98de48d
--- /dev/null
+++ b/arch/arm/mach-w90x900/dev.c
@@ -0,0 +1,389 @@
+/*
+ * linux/arch/arm/mach-w90x900/dev.c
+ *
+ * Copyright (C) 2009 Nuvoton corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/regs-serial.h>
+#include <mach/map.h>
+
+#include "cpu.h"
+
+/*NUC900 evb norflash driver data */
+
+#define NUC900_FLASH_BASE	0xA0000000
+#define NUC900_FLASH_SIZE	0x400000
+#define SPIOFFSET		0x200
+#define SPIOREG_SIZE		0x100
+
+static struct mtd_partition nuc900_flash_partitions[] = {
+	{
+		.name	=	"NOR Partition 1 for kernel (960K)",
+		.size	=	0xF0000,
+		.offset	=	0x10000,
+	},
+	{
+		.name	=	"NOR Partition 2 for image (1M)",
+		.size	=	0x100000,
+		.offset	=	0x100000,
+	},
+	{
+		.name	=	"NOR Partition 3 for user (2M)",
+		.size	=	0x200000,
+		.offset	=	0x00200000,
+	}
+};
+
+static struct physmap_flash_data nuc900_flash_data = {
+	.width		=	2,
+	.parts		=	nuc900_flash_partitions,
+	.nr_parts	=	ARRAY_SIZE(nuc900_flash_partitions),
+};
+
+static struct resource nuc900_flash_resources[] = {
+	{
+		.start	=	NUC900_FLASH_BASE,
+		.end	=	NUC900_FLASH_BASE + NUC900_FLASH_SIZE - 1,
+		.flags	=	IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nuc900_flash_device = {
+	.name		=	"physmap-flash",
+	.id		=	0,
+	.dev		= {
+				.platform_data = &nuc900_flash_data,
+			},
+	.resource	=	nuc900_flash_resources,
+	.num_resources	=	ARRAY_SIZE(nuc900_flash_resources),
+};
+
+/* USB EHCI Host Controller */
+
+static struct resource nuc900_usb_ehci_resource[] = {
+	[0] = {
+		.start = W90X900_PA_USBEHCIHOST,
+		.end   = W90X900_PA_USBEHCIHOST + W90X900_SZ_USBEHCIHOST - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_USBH,
+		.end   = IRQ_USBH,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 nuc900_device_usb_ehci_dmamask = 0xffffffffUL;
+
+static struct platform_device nuc900_device_usb_ehci = {
+	.name		  = "nuc900-ehci",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(nuc900_usb_ehci_resource),
+	.resource	  = nuc900_usb_ehci_resource,
+	.dev              = {
+		.dma_mask = &nuc900_device_usb_ehci_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+
+/* USB OHCI Host Controller */
+
+static struct resource nuc900_usb_ohci_resource[] = {
+	[0] = {
+		.start = W90X900_PA_USBOHCIHOST,
+		.end   = W90X900_PA_USBOHCIHOST + W90X900_SZ_USBOHCIHOST - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_USBH,
+		.end   = IRQ_USBH,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 nuc900_device_usb_ohci_dmamask = 0xffffffffUL;
+static struct platform_device nuc900_device_usb_ohci = {
+	.name		  = "nuc900-ohci",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(nuc900_usb_ohci_resource),
+	.resource	  = nuc900_usb_ohci_resource,
+	.dev              = {
+		.dma_mask = &nuc900_device_usb_ohci_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+
+/* USB Device (Gadget)*/
+
+static struct resource nuc900_usbgadget_resource[] = {
+	[0] = {
+		.start = W90X900_PA_USBDEV,
+		.end   = W90X900_PA_USBDEV + W90X900_SZ_USBDEV - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_USBD,
+		.end   = IRQ_USBD,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device nuc900_device_usbgadget = {
+	.name		= "nuc900-usbgadget",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(nuc900_usbgadget_resource),
+	.resource	= nuc900_usbgadget_resource,
+};
+
+/* MAC device */
+
+static struct resource nuc900_emc_resource[] = {
+	[0] = {
+		.start = W90X900_PA_EMC,
+		.end   = W90X900_PA_EMC + W90X900_SZ_EMC - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_EMCTX,
+		.end   = IRQ_EMCTX,
+		.flags = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start = IRQ_EMCRX,
+		.end   = IRQ_EMCRX,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 nuc900_device_emc_dmamask = 0xffffffffUL;
+static struct platform_device nuc900_device_emc = {
+	.name		= "nuc900-emc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(nuc900_emc_resource),
+	.resource	= nuc900_emc_resource,
+	.dev              = {
+		.dma_mask = &nuc900_device_emc_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+
+/* SPI device */
+
+static struct resource nuc900_spi_resource[] = {
+	[0] = {
+		.start = W90X900_PA_I2C + SPIOFFSET,
+		.end   = W90X900_PA_I2C + SPIOFFSET + SPIOREG_SIZE - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_SSP,
+		.end   = IRQ_SSP,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device nuc900_device_spi = {
+	.name		= "nuc900-spi",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(nuc900_spi_resource),
+	.resource	= nuc900_spi_resource,
+};
+
+/* spi device, spi flash info */
+
+static struct mtd_partition nuc900_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x0100000,
+		.offset = 0,
+	},
+};
+
+static struct flash_platform_data nuc900_spi_flash_data = {
+	.name = "m25p80",
+	.parts =  nuc900_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(nuc900_spi_flash_partitions),
+	.type = "w25x16",
+};
+
+static struct spi_board_info nuc900_spi_board_info[] __initdata = {
+	{
+		.modalias = "m25p80",
+		.max_speed_hz = 20000000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.platform_data = &nuc900_spi_flash_data,
+		.mode = SPI_MODE_0,
+	},
+};
+
+/* WDT Device */
+
+static struct resource nuc900_wdt_resource[] = {
+	[0] = {
+		.start = W90X900_PA_TIMER,
+		.end   = W90X900_PA_TIMER + W90X900_SZ_TIMER - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_WDT,
+		.end   = IRQ_WDT,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device nuc900_device_wdt = {
+	.name		= "nuc900-wdt",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(nuc900_wdt_resource),
+	.resource	= nuc900_wdt_resource,
+};
+
+/*
+ * public device definition between 910 and 920, or 910
+ * and 950 or 950 and 960...,their dev platform register
+ * should be in specific file such as nuc950, nuc960 c
+ * files rather than the public dev.c file here. so the
+ * corresponding platform_device definition should not be
+ * static.
+*/
+
+/* RTC controller*/
+
+static struct resource nuc900_rtc_resource[] = {
+	[0] = {
+		.start = W90X900_PA_RTC,
+		.end   = W90X900_PA_RTC + 0xff,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_RTC,
+		.end   = IRQ_RTC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device nuc900_device_rtc = {
+	.name		= "nuc900-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(nuc900_rtc_resource),
+	.resource	= nuc900_rtc_resource,
+};
+
+/*TouchScreen controller*/
+
+static struct resource nuc900_ts_resource[] = {
+	[0] = {
+		.start = W90X900_PA_ADC,
+		.end   = W90X900_PA_ADC + W90X900_SZ_ADC-1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_ADC,
+		.end   = IRQ_ADC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device nuc900_device_ts = {
+	.name		= "nuc900-ts",
+	.id		= -1,
+	.resource	= nuc900_ts_resource,
+	.num_resources	= ARRAY_SIZE(nuc900_ts_resource),
+};
+
+/* FMI Device */
+
+static struct resource nuc900_fmi_resource[] = {
+	[0] = {
+		.start = W90X900_PA_FMI,
+		.end   = W90X900_PA_FMI + W90X900_SZ_FMI - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_FMI,
+		.end   = IRQ_FMI,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device nuc900_device_fmi = {
+	.name		= "nuc900-fmi",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(nuc900_fmi_resource),
+	.resource	= nuc900_fmi_resource,
+};
+
+/* KPI controller*/
+
+static struct resource nuc900_kpi_resource[] = {
+	[0] = {
+		.start = W90X900_PA_KPI,
+		.end   = W90X900_PA_KPI + W90X900_SZ_KPI - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_KPI,
+		.end   = IRQ_KPI,
+		.flags = IORESOURCE_IRQ,
+	}
+
+};
+
+struct platform_device nuc900_device_kpi = {
+	.name		= "nuc900-kpi",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(nuc900_kpi_resource),
+	.resource	= nuc900_kpi_resource,
+};
+
+/*Here should be your evb resourse,such as LCD*/
+
+static struct platform_device *nuc900_public_dev[] __initdata = {
+	&nuc900_serial_device,
+	&nuc900_flash_device,
+	&nuc900_device_usb_ehci,
+	&nuc900_device_usb_ohci,
+	&nuc900_device_usbgadget,
+	&nuc900_device_emc,
+	&nuc900_device_spi,
+	&nuc900_device_wdt,
+};
+
+/* Provide adding specific CPU platform devices API */
+
+void __init nuc900_board_init(struct platform_device **device, int size)
+{
+	platform_add_devices(device, size);
+	platform_add_devices(nuc900_public_dev, ARRAY_SIZE(nuc900_public_dev));
+	spi_register_board_info(nuc900_spi_board_info,
+					ARRAY_SIZE(nuc900_spi_board_info));
+}
+
diff --git a/arch/arm/mach-w90x900/gpio.c b/arch/arm/mach-w90x900/gpio.c
index c72e0dfa182..ba05aec7ea4 100644
--- a/arch/arm/mach-w90x900/gpio.c
+++ b/arch/arm/mach-w90x900/gpio.c
@@ -1,7 +1,7 @@
 /*
- * linux/arch/arm/mach-w90p910/gpio.c
+ * linux/arch/arm/mach-w90x900/gpio.c
  *
- * Generic w90p910 GPIO handling
+ * Generic nuc900 GPIO handling
  *
  *  Wan ZongShun <mcuos.com@gmail.com>
  *
@@ -30,31 +30,31 @@
 #define GPIO_IN			(0x0C)
 #define GROUPINERV		(0x10)
 #define GPIO_GPIO(Nb)		(0x00000001 << (Nb))
-#define to_w90p910_gpio_chip(c) container_of(c, struct w90p910_gpio_chip, chip)
+#define to_nuc900_gpio_chip(c) container_of(c, struct nuc900_gpio_chip, chip)
 
-#define W90P910_GPIO_CHIP(name, base_gpio, nr_gpio)			\
+#define NUC900_GPIO_CHIP(name, base_gpio, nr_gpio)			\
 	{								\
 		.chip = {						\
 			.label		  = name,			\
-			.direction_input  = w90p910_dir_input,		\
-			.direction_output = w90p910_dir_output,		\
-			.get		  = w90p910_gpio_get,		\
-			.set		  = w90p910_gpio_set,		\
+			.direction_input  = nuc900_dir_input,		\
+			.direction_output = nuc900_dir_output,		\
+			.get		  = nuc900_gpio_get,		\
+			.set		  = nuc900_gpio_set,		\
 			.base		  = base_gpio,			\
 			.ngpio		  = nr_gpio,			\
 		}							\
 	}
 
-struct w90p910_gpio_chip {
+struct nuc900_gpio_chip {
 	struct gpio_chip	chip;
 	void __iomem		*regbase;	/* Base of group register*/
 	spinlock_t 		gpio_lock;
 };
 
-static int w90p910_gpio_get(struct gpio_chip *chip, unsigned offset)
+static int nuc900_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
-	struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
-	void __iomem *pio = w90p910_gpio->regbase + GPIO_IN;
+	struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+	void __iomem *pio = nuc900_gpio->regbase + GPIO_IN;
 	unsigned int regval;
 
 	regval = __raw_readl(pio);
@@ -63,14 +63,14 @@ static int w90p910_gpio_get(struct gpio_chip *chip, unsigned offset)
 	return (regval != 0);
 }
 
-static void w90p910_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
+static void nuc900_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
 {
-	struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
-	void __iomem *pio = w90p910_gpio->regbase + GPIO_OUT;
+	struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+	void __iomem *pio = nuc900_gpio->regbase + GPIO_OUT;
 	unsigned int regval;
 	unsigned long flags;
 
-	spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+	spin_lock_irqsave(&nuc900_gpio->gpio_lock, flags);
 
 	regval = __raw_readl(pio);
 
@@ -81,36 +81,36 @@ static void w90p910_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
 
 	__raw_writel(regval, pio);
 
-	spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+	spin_unlock_irqrestore(&nuc900_gpio->gpio_lock, flags);
 }
 
-static int w90p910_dir_input(struct gpio_chip *chip, unsigned offset)
+static int nuc900_dir_input(struct gpio_chip *chip, unsigned offset)
 {
-	struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
-	void __iomem *pio = w90p910_gpio->regbase + GPIO_DIR;
+	struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+	void __iomem *pio = nuc900_gpio->regbase + GPIO_DIR;
 	unsigned int regval;
 	unsigned long flags;
 
-	spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+	spin_lock_irqsave(&nuc900_gpio->gpio_lock, flags);
 
 	regval = __raw_readl(pio);
 	regval &= ~GPIO_GPIO(offset);
 	__raw_writel(regval, pio);
 
-	spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+	spin_unlock_irqrestore(&nuc900_gpio->gpio_lock, flags);
 
 	return 0;
 }
 
-static int w90p910_dir_output(struct gpio_chip *chip, unsigned offset, int val)
+static int nuc900_dir_output(struct gpio_chip *chip, unsigned offset, int val)
 {
-	struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
-	void __iomem *outreg = w90p910_gpio->regbase + GPIO_OUT;
-	void __iomem *pio = w90p910_gpio->regbase + GPIO_DIR;
+	struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+	void __iomem *outreg = nuc900_gpio->regbase + GPIO_OUT;
+	void __iomem *pio = nuc900_gpio->regbase + GPIO_DIR;
 	unsigned int regval;
 	unsigned long flags;
 
-	spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+	spin_lock_irqsave(&nuc900_gpio->gpio_lock, flags);
 
 	regval = __raw_readl(pio);
 	regval |= GPIO_GPIO(offset);
@@ -125,28 +125,28 @@ static int w90p910_dir_output(struct gpio_chip *chip, unsigned offset, int val)
 
 	__raw_writel(regval, outreg);
 
-	spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+	spin_unlock_irqrestore(&nuc900_gpio->gpio_lock, flags);
 
 	return 0;
 }
 
-static struct w90p910_gpio_chip w90p910_gpio[] = {
-	W90P910_GPIO_CHIP("GROUPC", 0, 16),
-	W90P910_GPIO_CHIP("GROUPD", 16, 10),
-	W90P910_GPIO_CHIP("GROUPE", 26, 14),
-	W90P910_GPIO_CHIP("GROUPF", 40, 10),
-	W90P910_GPIO_CHIP("GROUPG", 50, 17),
-	W90P910_GPIO_CHIP("GROUPH", 67, 8),
-	W90P910_GPIO_CHIP("GROUPI", 75, 17),
+static struct nuc900_gpio_chip nuc900_gpio[] = {
+	NUC900_GPIO_CHIP("GROUPC", 0, 16),
+	NUC900_GPIO_CHIP("GROUPD", 16, 10),
+	NUC900_GPIO_CHIP("GROUPE", 26, 14),
+	NUC900_GPIO_CHIP("GROUPF", 40, 10),
+	NUC900_GPIO_CHIP("GROUPG", 50, 17),
+	NUC900_GPIO_CHIP("GROUPH", 67, 8),
+	NUC900_GPIO_CHIP("GROUPI", 75, 17),
 };
 
-void __init w90p910_init_gpio(int nr_group)
+void __init nuc900_init_gpio(int nr_group)
 {
 	unsigned	i;
-	struct w90p910_gpio_chip *gpio_chip;
+	struct nuc900_gpio_chip *gpio_chip;
 
 	for (i = 0; i < nr_group; i++) {
-		gpio_chip = &w90p910_gpio[i];
+		gpio_chip = &nuc900_gpio[i];
 		spin_lock_init(&gpio_chip->gpio_lock);
 		gpio_chip->regbase = GPIO_BASE + i * GROUPINERV;
 		gpiochip_add(&gpio_chip->chip);
diff --git a/arch/arm/mach-w90x900/irq.c b/arch/arm/mach-w90x900/irq.c
index a296c9b81d2..0ce9d8e867e 100644
--- a/arch/arm/mach-w90x900/irq.c
+++ b/arch/arm/mach-w90x900/irq.c
@@ -36,13 +36,13 @@ struct group_irq {
 
 static DEFINE_SPINLOCK(groupirq_lock);
 
-#define DEFINE_GROUP(_name, _ctrlbit, _num)			\
-struct group_irq group_##_name = {				\
-		.enable		= w90x900_group_enable,		\
-		.gpen		= ((2 ^ _num) - 1) << _ctrlbit,	\
+#define DEFINE_GROUP(_name, _ctrlbit, _num)				\
+struct group_irq group_##_name = {					\
+		.enable		= nuc900_group_enable,			\
+		.gpen		= ((1 << _num) - 1) << _ctrlbit,	\
 	}
 
-static void w90x900_group_enable(struct group_irq *gpirq, int enable);
+static void nuc900_group_enable(struct group_irq *gpirq, int enable);
 
 static DEFINE_GROUP(nirq0, 0, 4);
 static DEFINE_GROUP(nirq1, 4, 4);
@@ -77,7 +77,7 @@ static void group_irq_disable(struct group_irq *group_irq)
 	spin_unlock_irqrestore(&groupirq_lock, flags);
 }
 
-static void w90x900_group_enable(struct group_irq *gpirq, int enable)
+static void nuc900_group_enable(struct group_irq *gpirq, int enable)
 {
 	unsigned int groupen = gpirq->gpen;
 	unsigned long regval;
@@ -92,7 +92,7 @@ static void w90x900_group_enable(struct group_irq *gpirq, int enable)
 	__raw_writel(regval, REG_AIC_GEN);
 }
 
-static void w90x900_irq_mask(unsigned int irq)
+static void nuc900_irq_mask(unsigned int irq)
 {
 	struct group_irq *group_irq;
 
@@ -143,12 +143,12 @@ static void w90x900_irq_mask(unsigned int irq)
  * to REG_AIC_EOSCR for ACK
  */
 
-static void w90x900_irq_ack(unsigned int irq)
+static void nuc900_irq_ack(unsigned int irq)
 {
 	__raw_writel(0x01, REG_AIC_EOSCR);
 }
 
-static void w90x900_irq_unmask(unsigned int irq)
+static void nuc900_irq_unmask(unsigned int irq)
 {
 	struct group_irq *group_irq;
 
@@ -194,20 +194,20 @@ static void w90x900_irq_unmask(unsigned int irq)
 		group_irq_enable(group_irq);
 }
 
-static struct irq_chip w90x900_irq_chip = {
-	.ack	   = w90x900_irq_ack,
-	.mask	   = w90x900_irq_mask,
-	.unmask	   = w90x900_irq_unmask,
+static struct irq_chip nuc900_irq_chip = {
+	.ack	   = nuc900_irq_ack,
+	.mask	   = nuc900_irq_mask,
+	.unmask	   = nuc900_irq_unmask,
 };
 
-void __init w90x900_init_irq(void)
+void __init nuc900_init_irq(void)
 {
 	int irqno;
 
 	__raw_writel(0xFFFFFFFE, REG_AIC_MDCR);
 
 	for (irqno = IRQ_WDT; irqno <= IRQ_ADC; irqno++) {
-		set_irq_chip(irqno, &w90x900_irq_chip);
+		set_irq_chip(irqno, &nuc900_irq_chip);
 		set_irq_handler(irqno, handle_level_irq);
 		set_irq_flags(irqno, IRQF_VALID);
 	}
diff --git a/arch/arm/mach-w90x900/mach-nuc910evb.c b/arch/arm/mach-w90x900/mach-nuc910evb.c
new file mode 100644
index 00000000000..ec05bda946f
--- /dev/null
+++ b/arch/arm/mach-w90x900/mach-nuc910evb.c
@@ -0,0 +1,44 @@
+/*
+ * linux/arch/arm/mach-w90x900/mach-nuc910evb.c
+ *
+ * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
+ *
+ * Copyright (C) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+#include <mach/map.h>
+
+#include "nuc910.h"
+
+static void __init nuc910evb_map_io(void)
+{
+	nuc910_map_io();
+	nuc910_init_clocks();
+}
+
+static void __init nuc910evb_init(void)
+{
+	nuc910_board_init();
+}
+
+MACHINE_START(W90P910EVB, "W90P910EVB")
+	/* Maintainer: Wan ZongShun */
+	.phys_io	= W90X900_PA_UART,
+	.io_pg_offst	= (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= 0,
+	.map_io		= nuc910evb_map_io,
+	.init_irq	= nuc900_init_irq,
+	.init_machine	= nuc910evb_init,
+	.timer		= &nuc900_timer,
+MACHINE_END
diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c
deleted file mode 100644
index 117578aed68..00000000000
--- a/arch/arm/mach-w90x900/mach-w90p910evb.c
+++ /dev/null
@@ -1,407 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/mach-w90p910evb.c
- *
- * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
- *
- * Copyright (C) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach-types.h>
-
-#include <mach/regs-serial.h>
-#include <mach/map.h>
-
-#include "cpu.h"
-/*w90p910 evb norflash driver data */
-
-#define W90P910_FLASH_BASE	0xA0000000
-#define W90P910_FLASH_SIZE	0x400000
-#define SPIOFFSET		0x200
-#define SPIOREG_SIZE		0x100
-
-static struct mtd_partition w90p910_flash_partitions[] = {
-	{
-		.name	=	"NOR Partition 1 for kernel (960K)",
-		.size	=	0xF0000,
-		.offset	=	0x10000,
-	},
-	{
-		.name	=	"NOR Partition 2 for image (1M)",
-		.size	=	0x100000,
-		.offset	=	0x100000,
-	},
-	{
-		.name	=	"NOR Partition 3 for user (2M)",
-		.size	=	0x200000,
-		.offset	=	0x00200000,
-	}
-};
-
-static struct physmap_flash_data w90p910_flash_data = {
-	.width		=	2,
-	.parts		=	w90p910_flash_partitions,
-	.nr_parts	=	ARRAY_SIZE(w90p910_flash_partitions),
-};
-
-static struct resource w90p910_flash_resources[] = {
-	{
-		.start	=	W90P910_FLASH_BASE,
-		.end	=	W90P910_FLASH_BASE + W90P910_FLASH_SIZE - 1,
-		.flags	=	IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device w90p910_flash_device = {
-	.name		=	"physmap-flash",
-	.id		=	0,
-	.dev		= {
-				.platform_data = &w90p910_flash_data,
-			},
-	.resource	=	w90p910_flash_resources,
-	.num_resources	=	ARRAY_SIZE(w90p910_flash_resources),
-};
-
-/* USB EHCI Host Controller */
-
-static struct resource w90x900_usb_ehci_resource[] = {
-	[0] = {
-		.start = W90X900_PA_USBEHCIHOST,
-		.end   = W90X900_PA_USBEHCIHOST + W90X900_SZ_USBEHCIHOST - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_USBH,
-		.end   = IRQ_USBH,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static u64 w90x900_device_usb_ehci_dmamask = 0xffffffffUL;
-
-struct platform_device w90x900_device_usb_ehci = {
-	.name		  = "w90x900-ehci",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(w90x900_usb_ehci_resource),
-	.resource	  = w90x900_usb_ehci_resource,
-	.dev              = {
-		.dma_mask = &w90x900_device_usb_ehci_dmamask,
-		.coherent_dma_mask = 0xffffffffUL
-	}
-};
-EXPORT_SYMBOL(w90x900_device_usb_ehci);
-
-/* USB OHCI Host Controller */
-
-static struct resource w90x900_usb_ohci_resource[] = {
-	[0] = {
-		.start = W90X900_PA_USBOHCIHOST,
-		.end   = W90X900_PA_USBOHCIHOST + W90X900_SZ_USBOHCIHOST - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_USBH,
-		.end   = IRQ_USBH,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static u64 w90x900_device_usb_ohci_dmamask = 0xffffffffUL;
-struct platform_device w90x900_device_usb_ohci = {
-	.name		  = "w90x900-ohci",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(w90x900_usb_ohci_resource),
-	.resource	  = w90x900_usb_ohci_resource,
-	.dev              = {
-		.dma_mask = &w90x900_device_usb_ohci_dmamask,
-		.coherent_dma_mask = 0xffffffffUL
-	}
-};
-EXPORT_SYMBOL(w90x900_device_usb_ohci);
-
-/*TouchScreen controller*/
-
-static struct resource w90x900_ts_resource[] = {
-	[0] = {
-		.start = W90X900_PA_ADC,
-		.end   = W90X900_PA_ADC + W90X900_SZ_ADC-1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_ADC,
-		.end   = IRQ_ADC,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device w90x900_device_ts = {
-	.name		= "w90x900-ts",
-	.id		= -1,
-	.resource	= w90x900_ts_resource,
-	.num_resources	= ARRAY_SIZE(w90x900_ts_resource),
-};
-EXPORT_SYMBOL(w90x900_device_ts);
-
-/* RTC controller*/
-
-static struct resource w90x900_rtc_resource[] = {
-	[0] = {
-		.start = W90X900_PA_RTC,
-		.end   = W90X900_PA_RTC + 0xff,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_RTC,
-		.end   = IRQ_RTC,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device w90x900_device_rtc = {
-	.name		= "w90x900-rtc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(w90x900_rtc_resource),
-	.resource	= w90x900_rtc_resource,
-};
-EXPORT_SYMBOL(w90x900_device_rtc);
-
-/* KPI controller*/
-
-static struct resource w90x900_kpi_resource[] = {
-	[0] = {
-		.start = W90X900_PA_KPI,
-		.end   = W90X900_PA_KPI + W90X900_SZ_KPI - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_KPI,
-		.end   = IRQ_KPI,
-		.flags = IORESOURCE_IRQ,
-	}
-
-};
-
-struct platform_device w90x900_device_kpi = {
-	.name		= "w90x900-kpi",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(w90x900_kpi_resource),
-	.resource	= w90x900_kpi_resource,
-};
-EXPORT_SYMBOL(w90x900_device_kpi);
-
-/* USB Device (Gadget)*/
-
-static struct resource w90x900_usbgadget_resource[] = {
-	[0] = {
-		.start = W90X900_PA_USBDEV,
-		.end   = W90X900_PA_USBDEV + W90X900_SZ_USBDEV - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_USBD,
-		.end   = IRQ_USBD,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device w90x900_device_usbgadget = {
-	.name		= "w90x900-usbgadget",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(w90x900_usbgadget_resource),
-	.resource	= w90x900_usbgadget_resource,
-};
-EXPORT_SYMBOL(w90x900_device_usbgadget);
-
-/* FMI Device */
-
-static struct resource w90p910_fmi_resource[] = {
-	[0] = {
-		.start = W90X900_PA_FMI,
-		.end   = W90X900_PA_FMI + W90X900_SZ_FMI - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_FMI,
-		.end   = IRQ_FMI,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device w90p910_device_fmi = {
-	.name		= "w90p910-fmi",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(w90p910_fmi_resource),
-	.resource	= w90p910_fmi_resource,
-};
-
-/* MAC device */
-
-static struct resource w90x900_emc_resource[] = {
-	[0] = {
-		.start = W90X900_PA_EMC,
-		.end   = W90X900_PA_EMC + W90X900_SZ_EMC - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_EMCTX,
-		.end   = IRQ_EMCTX,
-		.flags = IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start = IRQ_EMCRX,
-		.end   = IRQ_EMCRX,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static u64 w90x900_device_emc_dmamask = 0xffffffffUL;
-static struct platform_device w90p910_device_emc = {
-	.name		= "w90p910-emc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(w90x900_emc_resource),
-	.resource	= w90x900_emc_resource,
-	.dev              = {
-		.dma_mask = &w90x900_device_emc_dmamask,
-		.coherent_dma_mask = 0xffffffffUL
-	}
-};
-
-/* SPI device */
-
-static struct resource w90p910_spi_resource[] = {
-	[0] = {
-		.start = W90X900_PA_I2C + SPIOFFSET,
-		.end   = W90X900_PA_I2C + SPIOFFSET + SPIOREG_SIZE - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_SSP,
-		.end   = IRQ_SSP,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device w90p910_device_spi = {
-	.name		= "w90p910-spi",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(w90p910_spi_resource),
-	.resource	= w90p910_spi_resource,
-};
-
-/* spi device, spi flash info */
-
-static struct mtd_partition w90p910_spi_flash_partitions[] = {
-	{
-		.name = "bootloader(spi)",
-		.size = 0x0100000,
-		.offset = 0,
-	},
-};
-
-static struct flash_platform_data w90p910_spi_flash_data = {
-	.name = "m25p80",
-	.parts =  w90p910_spi_flash_partitions,
-	.nr_parts = ARRAY_SIZE(w90p910_spi_flash_partitions),
-	.type = "w25x16",
-};
-
-static struct spi_board_info w90p910_spi_board_info[] __initdata = {
-	{
-		.modalias = "m25p80",
-		.max_speed_hz = 20000000,
-		.bus_num = 0,
-		.chip_select = 1,
-		.platform_data = &w90p910_spi_flash_data,
-		.mode = SPI_MODE_0,
-	},
-};
-
-/* WDT Device */
-
-static struct resource w90p910_wdt_resource[] = {
-	[0] = {
-		.start = W90X900_PA_TIMER,
-		.end   = W90X900_PA_TIMER + W90X900_SZ_TIMER - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_WDT,
-		.end   = IRQ_WDT,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device w90p910_device_wdt = {
-	.name		= "w90p910-wdt",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(w90p910_wdt_resource),
-	.resource	= w90p910_wdt_resource,
-};
-
-static struct map_desc w90p910_iodesc[] __initdata = {
-};
-
-/*Here should be your evb resourse,such as LCD*/
-
-static struct platform_device *w90p910evb_dev[] __initdata = {
-	&w90p910_serial_device,
-	&w90p910_flash_device,
-	&w90x900_device_usb_ehci,
-	&w90x900_device_usb_ohci,
-	&w90x900_device_ts,
-	&w90x900_device_rtc,
-	&w90x900_device_kpi,
-	&w90x900_device_usbgadget,
-	&w90p910_device_fmi,
-	&w90p910_device_emc,
-	&w90p910_device_spi,
-	&w90p910_device_wdt,
-};
-
-static void __init w90p910evb_map_io(void)
-{
-	w90p910_map_io(w90p910_iodesc, ARRAY_SIZE(w90p910_iodesc));
-	w90p910_init_clocks();
-}
-
-static void __init w90p910evb_init(void)
-{
-	platform_add_devices(w90p910evb_dev, ARRAY_SIZE(w90p910evb_dev));
-	spi_register_board_info(w90p910_spi_board_info,
-					ARRAY_SIZE(w90p910_spi_board_info));
-}
-
-MACHINE_START(W90P910EVB, "W90P910EVB")
-	/* Maintainer: Wan ZongShun */
-	.phys_io	= W90X900_PA_UART,
-	.io_pg_offst	= (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
-	.boot_params	= 0,
-	.map_io		= w90p910evb_map_io,
-	.init_irq	= w90x900_init_irq,
-	.init_machine	= w90p910evb_init,
-	.timer		= &w90x900_timer,
-MACHINE_END
diff --git a/arch/arm/mach-w90x900/mfp-w90p910.c b/arch/arm/mach-w90x900/mfp-w90p910.c
deleted file mode 100644
index 4533098a0ee..00000000000
--- a/arch/arm/mach-w90x900/mfp-w90p910.c
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/mfp-w90p910.c
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-#define REG_MFSEL	(W90X900_VA_GCR + 0xC)
-
-#define GPSELF		(0x01 << 1)
-
-#define GPSELC		(0x03 << 2)
-#define ENKPI		(0x02 << 2)
-#define ENNAND		(0x01 << 2)
-
-#define GPSELEI0	(0x01 << 26)
-#define GPSELEI1	(0x01 << 27)
-
-#define GPIOG0TO1	(0x03 << 14)
-#define GPIOG2TO3	(0x03 << 16)
-#define ENSPI		(0x0a << 14)
-#define ENI2C0		(0x01 << 14)
-#define ENI2C1		(0x01 << 16)
-
-static DEFINE_MUTEX(mfp_mutex);
-
-void mfp_set_groupf(struct device *dev)
-{
-	unsigned long mfpen;
-	const char *dev_id;
-
-	BUG_ON(!dev);
-
-	mutex_lock(&mfp_mutex);
-
-	dev_id = dev_name(dev);
-
-	mfpen = __raw_readl(REG_MFSEL);
-
-	if (strcmp(dev_id, "w90p910-emc") == 0)
-		mfpen |= GPSELF;/*enable mac*/
-	else
-		mfpen &= ~GPSELF;/*GPIOF[9:0]*/
-
-	__raw_writel(mfpen, REG_MFSEL);
-
-	mutex_unlock(&mfp_mutex);
-}
-EXPORT_SYMBOL(mfp_set_groupf);
-
-void mfp_set_groupc(struct device *dev)
-{
-	unsigned long mfpen;
-	const char *dev_id;
-
-	BUG_ON(!dev);
-
-	mutex_lock(&mfp_mutex);
-
-	dev_id = dev_name(dev);
-
-	mfpen = __raw_readl(REG_MFSEL);
-
-	if (strcmp(dev_id, "w90p910-lcd") == 0)
-		mfpen |= GPSELC;/*enable lcd*/
-	else if (strcmp(dev_id, "w90p910-kpi") == 0) {
-			mfpen &= (~GPSELC);/*enable kpi*/
-			mfpen |= ENKPI;
-		} else if (strcmp(dev_id, "w90p910-nand") == 0) {
-				mfpen &= (~GPSELC);/*enable nand*/
-				mfpen |= ENNAND;
-			} else
-				mfpen &= (~GPSELC);/*GPIOC[14:0]*/
-
-	__raw_writel(mfpen, REG_MFSEL);
-
-	mutex_unlock(&mfp_mutex);
-}
-EXPORT_SYMBOL(mfp_set_groupc);
-
-void mfp_set_groupi(struct device *dev)
-{
-	unsigned long mfpen;
-	const char *dev_id;
-
-	BUG_ON(!dev);
-
-	mutex_lock(&mfp_mutex);
-
-	dev_id = dev_name(dev);
-
-	mfpen = __raw_readl(REG_MFSEL);
-
-	mfpen &= ~GPSELEI1;/*default gpio16*/
-
-	if (strcmp(dev_id, "w90p910-wdog") == 0)
-		mfpen |= GPSELEI1;/*enable wdog*/
-		else if (strcmp(dev_id, "w90p910-atapi") == 0)
-			mfpen |= GPSELEI0;/*enable atapi*/
-			else if (strcmp(dev_id, "w90p910-keypad") == 0)
-				mfpen &= ~GPSELEI0;/*enable keypad*/
-
-	__raw_writel(mfpen, REG_MFSEL);
-
-	mutex_unlock(&mfp_mutex);
-}
-EXPORT_SYMBOL(mfp_set_groupi);
-
-void mfp_set_groupg(struct device *dev)
-{
-	unsigned long mfpen;
-	const char *dev_id;
-
-	BUG_ON(!dev);
-
-	mutex_lock(&mfp_mutex);
-
-	dev_id = dev_name(dev);
-
-	mfpen = __raw_readl(REG_MFSEL);
-
-	if (strcmp(dev_id, "w90p910-spi") == 0) {
-		mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);
-		mfpen |= ENSPI;/*enable spi*/
-	} else if (strcmp(dev_id, "w90p910-i2c0") == 0) {
-		mfpen &= ~(GPIOG0TO1);
-		mfpen |= ENI2C0;/*enable i2c0*/
-	} else if (strcmp(dev_id, "w90p910-i2c1") == 0) {
-		mfpen &= ~(GPIOG2TO3);
-		mfpen |= ENI2C1;/*enable i2c1*/
-	} else {
-		mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);/*GPIOG[3:0]*/
-	}
-
-	__raw_writel(mfpen, REG_MFSEL);
-
-	mutex_unlock(&mfp_mutex);
-}
-EXPORT_SYMBOL(mfp_set_groupg);
-
diff --git a/arch/arm/mach-w90x900/mfp.c b/arch/arm/mach-w90x900/mfp.c
new file mode 100644
index 00000000000..a47dc9a708e
--- /dev/null
+++ b/arch/arm/mach-w90x900/mfp.c
@@ -0,0 +1,158 @@
+/*
+ * linux/arch/arm/mach-w90x900/mfp.c
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+#define REG_MFSEL	(W90X900_VA_GCR + 0xC)
+
+#define GPSELF		(0x01 << 1)
+
+#define GPSELC		(0x03 << 2)
+#define ENKPI		(0x02 << 2)
+#define ENNAND		(0x01 << 2)
+
+#define GPSELEI0	(0x01 << 26)
+#define GPSELEI1	(0x01 << 27)
+
+#define GPIOG0TO1	(0x03 << 14)
+#define GPIOG2TO3	(0x03 << 16)
+#define ENSPI		(0x0a << 14)
+#define ENI2C0		(0x01 << 14)
+#define ENI2C1		(0x01 << 16)
+
+static DEFINE_MUTEX(mfp_mutex);
+
+void mfp_set_groupf(struct device *dev)
+{
+	unsigned long mfpen;
+	const char *dev_id;
+
+	BUG_ON(!dev);
+
+	mutex_lock(&mfp_mutex);
+
+	dev_id = dev_name(dev);
+
+	mfpen = __raw_readl(REG_MFSEL);
+
+	if (strcmp(dev_id, "nuc900-emc") == 0)
+		mfpen |= GPSELF;/*enable mac*/
+	else
+		mfpen &= ~GPSELF;/*GPIOF[9:0]*/
+
+	__raw_writel(mfpen, REG_MFSEL);
+
+	mutex_unlock(&mfp_mutex);
+}
+EXPORT_SYMBOL(mfp_set_groupf);
+
+void mfp_set_groupc(struct device *dev)
+{
+	unsigned long mfpen;
+	const char *dev_id;
+
+	BUG_ON(!dev);
+
+	mutex_lock(&mfp_mutex);
+
+	dev_id = dev_name(dev);
+
+	mfpen = __raw_readl(REG_MFSEL);
+
+	if (strcmp(dev_id, "nuc900-lcd") == 0)
+		mfpen |= GPSELC;/*enable lcd*/
+	else if (strcmp(dev_id, "nuc900-kpi") == 0) {
+		mfpen &= (~GPSELC);/*enable kpi*/
+		mfpen |= ENKPI;
+	} else if (strcmp(dev_id, "nuc900-nand") == 0) {
+		mfpen &= (~GPSELC);/*enable nand*/
+		mfpen |= ENNAND;
+	} else
+		mfpen &= (~GPSELC);/*GPIOC[14:0]*/
+
+	__raw_writel(mfpen, REG_MFSEL);
+
+	mutex_unlock(&mfp_mutex);
+}
+EXPORT_SYMBOL(mfp_set_groupc);
+
+void mfp_set_groupi(struct device *dev)
+{
+	unsigned long mfpen;
+	const char *dev_id;
+
+	BUG_ON(!dev);
+
+	mutex_lock(&mfp_mutex);
+
+	dev_id = dev_name(dev);
+
+	mfpen = __raw_readl(REG_MFSEL);
+
+	mfpen &= ~GPSELEI1;/*default gpio16*/
+
+	if (strcmp(dev_id, "nuc900-wdog") == 0)
+		mfpen |= GPSELEI1;/*enable wdog*/
+	else if (strcmp(dev_id, "nuc900-atapi") == 0)
+		mfpen |= GPSELEI0;/*enable atapi*/
+	else if (strcmp(dev_id, "nuc900-keypad") == 0)
+		mfpen &= ~GPSELEI0;/*enable keypad*/
+
+	__raw_writel(mfpen, REG_MFSEL);
+
+	mutex_unlock(&mfp_mutex);
+}
+EXPORT_SYMBOL(mfp_set_groupi);
+
+void mfp_set_groupg(struct device *dev)
+{
+	unsigned long mfpen;
+	const char *dev_id;
+
+	BUG_ON(!dev);
+
+	mutex_lock(&mfp_mutex);
+
+	dev_id = dev_name(dev);
+
+	mfpen = __raw_readl(REG_MFSEL);
+
+	if (strcmp(dev_id, "nuc900-spi") == 0) {
+		mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);
+		mfpen |= ENSPI;/*enable spi*/
+	} else if (strcmp(dev_id, "nuc900-i2c0") == 0) {
+		mfpen &= ~(GPIOG0TO1);
+		mfpen |= ENI2C0;/*enable i2c0*/
+	} else if (strcmp(dev_id, "nuc900-i2c1") == 0) {
+		mfpen &= ~(GPIOG2TO3);
+		mfpen |= ENI2C1;/*enable i2c1*/
+	} else {
+		mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);/*GPIOG[3:0]*/
+	}
+
+	__raw_writel(mfpen, REG_MFSEL);
+
+	mutex_unlock(&mfp_mutex);
+}
+EXPORT_SYMBOL(mfp_set_groupg);
+
diff --git a/arch/arm/mach-w90x900/nuc910.c b/arch/arm/mach-w90x900/nuc910.c
new file mode 100644
index 00000000000..656f03b3b62
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc910.c
@@ -0,0 +1,60 @@
+/*
+ * linux/arch/arm/mach-w90x900/nuc910.c
+ *
+ * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
+ *
+ * Copyright (c) 2009 Nuvoton corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC910 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include "cpu.h"
+#include "clock.h"
+
+/* define specific CPU platform device */
+
+static struct platform_device *nuc910_dev[] __initdata = {
+	&nuc900_device_ts,
+	&nuc900_device_rtc,
+};
+
+/* define specific CPU platform io map */
+
+static struct map_desc nuc910evb_iodesc[] __initdata = {
+	IODESC_ENT(USBEHCIHOST),
+	IODESC_ENT(USBOHCIHOST),
+	IODESC_ENT(KPI),
+	IODESC_ENT(USBDEV),
+	IODESC_ENT(ADC),
+};
+
+/*Init NUC910 evb io*/
+
+void __init nuc910_map_io(void)
+{
+	nuc900_map_io(nuc910evb_iodesc, ARRAY_SIZE(nuc910evb_iodesc));
+}
+
+/*Init NUC910 clock*/
+
+void __init nuc910_init_clocks(void)
+{
+	nuc900_init_clocks();
+}
+
+/*Init NUC910 board info*/
+
+void __init nuc910_board_init(void)
+{
+	nuc900_board_init(nuc910_dev, ARRAY_SIZE(nuc910_dev));
+}
diff --git a/arch/arm/mach-w90x900/nuc910.h b/arch/arm/mach-w90x900/nuc910.h
new file mode 100644
index 00000000000..83e9ba5fc26
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc910.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-w90x900/nuc910.h
+ *
+ * Copyright (c) 2008 Nuvoton corporation
+ *
+ * Header file for NUC900 CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+struct map_desc;
+struct sys_timer;
+
+/* core initialisation functions */
+
+extern void nuc900_init_irq(void);
+extern struct sys_timer nuc900_timer;
+
+/* extern file from nuc910.c */
+
+extern void nuc910_board_init(void);
+extern void nuc910_init_clocks(void);
+extern void nuc910_map_io(void);
diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c
index 5e06770e601..4128af870b4 100644
--- a/arch/arm/mach-w90x900/time.c
+++ b/arch/arm/mach-w90x900/time.c
@@ -44,7 +44,7 @@
 
 unsigned int timer0_load;
 
-static void w90p910_clockevent_setmode(enum clock_event_mode mode,
+static void nuc900_clockevent_setmode(enum clock_event_mode mode,
 		struct clock_event_device *clk)
 {
 	unsigned int val;
@@ -71,7 +71,7 @@ static void w90p910_clockevent_setmode(enum clock_event_mode mode,
 	__raw_writel(val, REG_TCSR0);
 }
 
-static int w90p910_clockevent_setnextevent(unsigned long evt,
+static int nuc900_clockevent_setnextevent(unsigned long evt,
 		struct clock_event_device *clk)
 {
 	unsigned int val;
@@ -85,20 +85,20 @@ static int w90p910_clockevent_setnextevent(unsigned long evt,
 	return 0;
 }
 
-static struct clock_event_device w90p910_clockevent_device = {
-	.name		= "w90p910-timer0",
+static struct clock_event_device nuc900_clockevent_device = {
+	.name		= "nuc900-timer0",
 	.shift		= 32,
 	.features	= CLOCK_EVT_MODE_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode	= w90p910_clockevent_setmode,
-	.set_next_event	= w90p910_clockevent_setnextevent,
+	.set_mode	= nuc900_clockevent_setmode,
+	.set_next_event	= nuc900_clockevent_setnextevent,
 	.rating		= 300,
 };
 
 /*IRQ handler for the timer*/
 
-static irqreturn_t w90p910_timer0_interrupt(int irq, void *dev_id)
+static irqreturn_t nuc900_timer0_interrupt(int irq, void *dev_id)
 {
-	struct clock_event_device *evt = &w90p910_clockevent_device;
+	struct clock_event_device *evt = &nuc900_clockevent_device;
 
 	__raw_writel(0x01, REG_TISR); /* clear TIF0 */
 
@@ -106,40 +106,40 @@ static irqreturn_t w90p910_timer0_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction w90p910_timer0_irq = {
-	.name		= "w90p910-timer0",
+static struct irqaction nuc900_timer0_irq = {
+	.name		= "nuc900-timer0",
 	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= w90p910_timer0_interrupt,
+	.handler	= nuc900_timer0_interrupt,
 };
 
-static void __init w90p910_clockevents_init(unsigned int rate)
+static void __init nuc900_clockevents_init(unsigned int rate)
 {
-	w90p910_clockevent_device.mult = div_sc(rate, NSEC_PER_SEC,
-					w90p910_clockevent_device.shift);
-	w90p910_clockevent_device.max_delta_ns = clockevent_delta2ns(0xffffffff,
-					&w90p910_clockevent_device);
-	w90p910_clockevent_device.min_delta_ns = clockevent_delta2ns(0xf,
-					&w90p910_clockevent_device);
-	w90p910_clockevent_device.cpumask = cpumask_of(0);
-
-	clockevents_register_device(&w90p910_clockevent_device);
+	nuc900_clockevent_device.mult = div_sc(rate, NSEC_PER_SEC,
+					nuc900_clockevent_device.shift);
+	nuc900_clockevent_device.max_delta_ns = clockevent_delta2ns(0xffffffff,
+					&nuc900_clockevent_device);
+	nuc900_clockevent_device.min_delta_ns = clockevent_delta2ns(0xf,
+					&nuc900_clockevent_device);
+	nuc900_clockevent_device.cpumask = cpumask_of(0);
+
+	clockevents_register_device(&nuc900_clockevent_device);
 }
 
-static cycle_t w90p910_get_cycles(struct clocksource *cs)
+static cycle_t nuc900_get_cycles(struct clocksource *cs)
 {
 	return ~__raw_readl(REG_TDR1);
 }
 
-static struct clocksource clocksource_w90p910 = {
-	.name	= "w90p910-timer1",
+static struct clocksource clocksource_nuc900 = {
+	.name	= "nuc900-timer1",
 	.rating	= 200,
-	.read	= w90p910_get_cycles,
+	.read	= nuc900_get_cycles,
 	.mask	= CLOCKSOURCE_MASK(32),
 	.shift	= 20,
 	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-static void __init w90p910_clocksource_init(unsigned int rate)
+static void __init nuc900_clocksource_init(unsigned int rate)
 {
 	unsigned int val;
 
@@ -149,12 +149,12 @@ static void __init w90p910_clocksource_init(unsigned int rate)
 	val |= (COUNTEN | PERIOD);
 	__raw_writel(val, REG_TCSR1);
 
-	clocksource_w90p910.mult =
-		clocksource_khz2mult((rate / 1000), clocksource_w90p910.shift);
-	clocksource_register(&clocksource_w90p910);
+	clocksource_nuc900.mult =
+		clocksource_khz2mult((rate / 1000), clocksource_nuc900.shift);
+	clocksource_register(&clocksource_nuc900);
 }
 
-static void __init w90p910_timer_init(void)
+static void __init nuc900_timer_init(void)
 {
 	struct clk *ck_ext = clk_get(NULL, "ext");
 	unsigned int	rate;
@@ -171,12 +171,12 @@ static void __init w90p910_timer_init(void)
 	__raw_writel(RESETINT, REG_TISR);
 	timer0_load = (rate / TICKS_PER_SEC);
 
-	setup_irq(IRQ_TIMER0, &w90p910_timer0_irq);
+	setup_irq(IRQ_TIMER0, &nuc900_timer0_irq);
 
-	w90p910_clocksource_init(rate);
-	w90p910_clockevents_init(rate);
+	nuc900_clocksource_init(rate);
+	nuc900_clockevents_init(rate);
 }
 
-struct sys_timer w90x900_timer = {
-	.init		= w90p910_timer_init,
+struct sys_timer nuc900_timer = {
+	.init		= nuc900_timer_init,
 };
diff --git a/arch/arm/mach-w90x900/w90p910.c b/arch/arm/mach-w90x900/w90p910.c
deleted file mode 100644
index d33723b69d1..00000000000
--- a/arch/arm/mach-w90x900/w90p910.c
+++ /dev/null
@@ -1,224 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/w90p910.c
- *
- * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
- *
- * Copyright (c) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * W90P910 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/serial_8250.h>
-#include <linux/delay.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-serial.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-ebi.h>
-
-#include "cpu.h"
-#include "clock.h"
-
-/* Initial IO mappings */
-
-static struct map_desc w90p910_iodesc[] __initdata = {
-	IODESC_ENT(IRQ),
-	IODESC_ENT(GCR),
-	IODESC_ENT(UART),
-	IODESC_ENT(TIMER),
-	IODESC_ENT(EBI),
-	IODESC_ENT(USBEHCIHOST),
-	IODESC_ENT(USBOHCIHOST),
-	IODESC_ENT(ADC),
-	IODESC_ENT(RTC),
-	IODESC_ENT(KPI),
-	IODESC_ENT(USBDEV),
-	/*IODESC_ENT(LCD),*/
-};
-
-/* Initial clock declarations. */
-static DEFINE_CLK(lcd, 0);
-static DEFINE_CLK(audio, 1);
-static DEFINE_CLK(fmi, 4);
-static DEFINE_SUBCLK(ms, 0);
-static DEFINE_SUBCLK(sd, 1);
-static DEFINE_CLK(dmac, 5);
-static DEFINE_CLK(atapi, 6);
-static DEFINE_CLK(emc, 7);
-static DEFINE_SUBCLK(rmii, 2);
-static DEFINE_CLK(usbd, 8);
-static DEFINE_CLK(usbh, 9);
-static DEFINE_CLK(g2d, 10);;
-static DEFINE_CLK(pwm, 18);
-static DEFINE_CLK(ps2, 24);
-static DEFINE_CLK(kpi, 25);
-static DEFINE_CLK(wdt, 26);
-static DEFINE_CLK(gdma, 27);
-static DEFINE_CLK(adc, 28);
-static DEFINE_CLK(usi, 29);
-static DEFINE_CLK(ext, 0);
-
-static struct clk_lookup w90p910_clkregs[] = {
-	DEF_CLKLOOK(&clk_lcd, "w90p910-lcd", NULL),
-	DEF_CLKLOOK(&clk_audio, "w90p910-audio", NULL),
-	DEF_CLKLOOK(&clk_fmi, "w90p910-fmi", NULL),
-	DEF_CLKLOOK(&clk_ms, "w90p910-fmi", "MS"),
-	DEF_CLKLOOK(&clk_sd, "w90p910-fmi", "SD"),
-	DEF_CLKLOOK(&clk_dmac, "w90p910-dmac", NULL),
-	DEF_CLKLOOK(&clk_atapi, "w90p910-atapi", NULL),
-	DEF_CLKLOOK(&clk_emc, "w90p910-emc", NULL),
-	DEF_CLKLOOK(&clk_rmii, "w90p910-emc", "RMII"),
-	DEF_CLKLOOK(&clk_usbd, "w90p910-usbd", NULL),
-	DEF_CLKLOOK(&clk_usbh, "w90p910-usbh", NULL),
-	DEF_CLKLOOK(&clk_g2d, "w90p910-g2d", NULL),
-	DEF_CLKLOOK(&clk_pwm, "w90p910-pwm", NULL),
-	DEF_CLKLOOK(&clk_ps2, "w90p910-ps2", NULL),
-	DEF_CLKLOOK(&clk_kpi, "w90p910-kpi", NULL),
-	DEF_CLKLOOK(&clk_wdt, "w90p910-wdt", NULL),
-	DEF_CLKLOOK(&clk_gdma, "w90p910-gdma", NULL),
-	DEF_CLKLOOK(&clk_adc, "w90p910-adc", NULL),
-	DEF_CLKLOOK(&clk_usi, "w90p910-spi", NULL),
-	DEF_CLKLOOK(&clk_ext, NULL, "ext"),
-};
-
-/* Initial serial platform data */
-
-struct plat_serial8250_port w90p910_uart_data[] = {
-	W90X900_8250PORT(UART0),
-};
-
-struct platform_device w90p910_serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= w90p910_uart_data,
-	},
-};
-
-/*Init W90P910 evb io*/
-
-void __init w90p910_map_io(struct map_desc *mach_desc, int mach_size)
-{
-	unsigned long idcode = 0x0;
-
-	iotable_init(w90p910_iodesc, ARRAY_SIZE(w90p910_iodesc));
-
-	idcode = __raw_readl(W90X900PDID);
-	if (idcode != W90P910_CPUID)
-		printk(KERN_ERR "CPU type 0x%08lx is not W90P910\n", idcode);
-}
-
-/*Set W90P910 cpu frequence*/
-static int __init w90p910_set_clkval(unsigned int cpufreq)
-{
-	unsigned int pllclk, ahbclk, apbclk, val;
-
-	pllclk = 0;
-	ahbclk = 0;
-	apbclk = 0;
-
-	switch (cpufreq) {
-	case 66:
-		pllclk = PLL_66MHZ;
-		ahbclk = AHB_CPUCLK_1_1;
-		apbclk = APB_AHB_1_2;
-		break;
-
-	case 100:
-		pllclk = PLL_100MHZ;
-		ahbclk = AHB_CPUCLK_1_1;
-		apbclk = APB_AHB_1_2;
-		break;
-
-	case 120:
-		pllclk = PLL_120MHZ;
-		ahbclk = AHB_CPUCLK_1_2;
-		apbclk = APB_AHB_1_2;
-		break;
-
-	case 166:
-		pllclk = PLL_166MHZ;
-		ahbclk = AHB_CPUCLK_1_2;
-		apbclk = APB_AHB_1_2;
-		break;
-
-	case 200:
-		pllclk = PLL_200MHZ;
-		ahbclk = AHB_CPUCLK_1_2;
-		apbclk = APB_AHB_1_2;
-		break;
-	}
-
-	__raw_writel(pllclk, REG_PLLCON0);
-
-	val = __raw_readl(REG_CLKDIV);
-	val &= ~(0x03 << 24 | 0x03 << 26);
-	val |= (ahbclk << 24 | apbclk << 26);
-	__raw_writel(val, REG_CLKDIV);
-
-	return 	0;
-}
-static int __init w90p910_set_cpufreq(char *str)
-{
-	unsigned long cpufreq, val;
-
-	if (!*str)
-		return 0;
-
-	strict_strtoul(str, 0, &cpufreq);
-
-	w90p910_clock_source(NULL, "ext");
-
-	w90p910_set_clkval(cpufreq);
-
-	mdelay(1);
-
-	val = __raw_readl(REG_CKSKEW);
-	val &= ~0xff;
-	val |= DEFAULTSKEW;
-	__raw_writel(val, REG_CKSKEW);
-
-	w90p910_clock_source(NULL, "pll0");
-
-	return 1;
-}
-
-__setup("cpufreq=", w90p910_set_cpufreq);
-
-/*Init W90P910 clock*/
-
-void __init w90p910_init_clocks(void)
-{
-	clks_register(w90p910_clkregs, ARRAY_SIZE(w90p910_clkregs));
-}
-
-static int __init w90p910_init_cpu(void)
-{
-	return 0;
-}
-
-static int __init w90x900_arch_init(void)
-{
-	return w90p910_init_cpu();
-}
-arch_initcall(w90x900_arch_init);
-- 
cgit v1.2.3


From 936fbe9efc96d40c8cdc23bba31a3beaad4f96c1 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Fri, 21 Aug 2009 07:08:24 +0100
Subject: ARM: 5683/1: Add nuc950 platform to w90x900

Add nuc950 platform to w90x900.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/Kconfig          | 15 ++++++++++
 arch/arm/mach-w90x900/Makefile         |  2 ++
 arch/arm/mach-w90x900/mach-nuc950evb.c | 44 +++++++++++++++++++++++++++
 arch/arm/mach-w90x900/nuc950.c         | 54 ++++++++++++++++++++++++++++++++++
 arch/arm/mach-w90x900/nuc950.h         | 28 ++++++++++++++++++
 5 files changed, 143 insertions(+)
 create mode 100644 arch/arm/mach-w90x900/mach-nuc950evb.c
 create mode 100644 arch/arm/mach-w90x900/nuc950.c
 create mode 100644 arch/arm/mach-w90x900/nuc950.h

(limited to 'arch/arm')

diff --git a/arch/arm/mach-w90x900/Kconfig b/arch/arm/mach-w90x900/Kconfig
index 8e4178fe5ec..163b8010e57 100644
--- a/arch/arm/mach-w90x900/Kconfig
+++ b/arch/arm/mach-w90x900/Kconfig
@@ -5,6 +5,11 @@ config CPU_W90P910
 	help
 	  Support for W90P910 of Nuvoton W90X900 CPUs.
 
+config CPU_NUC950
+	bool
+	help
+	  Support for NUCP950 of Nuvoton NUC900 CPUs.
+
 menu "W90P910 Machines"
 
 config MACH_W90P910EVB
@@ -16,4 +21,14 @@ config MACH_W90P910EVB
 
 endmenu
 
+menu "NUC950 Machines"
+
+config MACH_W90P950EVB
+	bool "Nuvoton NUC950 Evaluation Board"
+	select CPU_NUC950
+	help
+	   Say Y here if you are using the Nuvoton NUC950EVB
+
+endmenu
+
 endif
diff --git a/arch/arm/mach-w90x900/Makefile b/arch/arm/mach-w90x900/Makefile
index e38aa328e60..a4622b577a2 100644
--- a/arch/arm/mach-w90x900/Makefile
+++ b/arch/arm/mach-w90x900/Makefile
@@ -9,7 +9,9 @@ obj-y				+= clksel.o dev.o cpu.o
 # W90X900 CPU support files
 
 obj-$(CONFIG_CPU_W90P910)	+= nuc910.o
+obj-$(CONFIG_CPU_NUC950)	+= nuc950.o
 
 # machine support
 
 obj-$(CONFIG_MACH_W90P910EVB)	+= mach-nuc910evb.o
+obj-$(CONFIG_MACH_W90P950EVB)	+= mach-nuc950evb.o
diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c
new file mode 100644
index 00000000000..cef903bcccd
--- /dev/null
+++ b/arch/arm/mach-w90x900/mach-nuc950evb.c
@@ -0,0 +1,44 @@
+/*
+ * linux/arch/arm/mach-w90x900/mach-nuc950evb.c
+ *
+ * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
+ *
+ * Copyright (C) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+#include <mach/map.h>
+
+#include "nuc950.h"
+
+static void __init nuc950evb_map_io(void)
+{
+	nuc950_map_io();
+	nuc950_init_clocks();
+}
+
+static void __init nuc950evb_init(void)
+{
+	nuc950_board_init();
+}
+
+MACHINE_START(W90P950EVB, "W90P950EVB")
+	/* Maintainer: Wan ZongShun */
+	.phys_io	= W90X900_PA_UART,
+	.io_pg_offst	= (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= 0,
+	.map_io		= nuc950evb_map_io,
+	.init_irq	= nuc900_init_irq,
+	.init_machine	= nuc950evb_init,
+	.timer		= &nuc900_timer,
+MACHINE_END
diff --git a/arch/arm/mach-w90x900/nuc950.c b/arch/arm/mach-w90x900/nuc950.c
new file mode 100644
index 00000000000..149508116d1
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc950.c
@@ -0,0 +1,54 @@
+/*
+ * linux/arch/arm/mach-w90x900/nuc950.c
+ *
+ * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC950 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include "cpu.h"
+
+/* define specific CPU platform device */
+
+static struct platform_device *nuc950_dev[] __initdata = {
+	&nuc900_device_kpi,
+	&nuc900_device_fmi,
+};
+
+/* define specific CPU platform io map */
+
+static struct map_desc nuc950evb_iodesc[] __initdata = {
+};
+
+/*Init NUC950 evb io*/
+
+void __init nuc950_map_io(void)
+{
+	nuc900_map_io(nuc950evb_iodesc, ARRAY_SIZE(nuc950evb_iodesc));
+}
+
+/*Init NUC950 clock*/
+
+void __init nuc950_init_clocks(void)
+{
+	nuc900_init_clocks();
+}
+
+/*Init NUC950 board info*/
+
+void __init nuc950_board_init(void)
+{
+	nuc900_board_init(nuc950_dev, ARRAY_SIZE(nuc950_dev));
+}
diff --git a/arch/arm/mach-w90x900/nuc950.h b/arch/arm/mach-w90x900/nuc950.h
new file mode 100644
index 00000000000..98a1148bc5a
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc950.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-w90x900/nuc950.h
+ *
+ * Copyright (c) 2008 Nuvoton corporation
+ *
+ * Header file for NUC900 CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+struct map_desc;
+struct sys_timer;
+
+/* core initialisation functions */
+
+extern void nuc900_init_irq(void);
+extern struct sys_timer nuc900_timer;
+
+/* extern file from nuc950.c */
+
+extern void nuc950_board_init(void);
+extern void nuc950_init_clocks(void);
+extern void nuc950_map_io(void);
-- 
cgit v1.2.3


From 8e22676e56673494a15ba95b57af21eb47d8b98a Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Fri, 21 Aug 2009 07:09:03 +0100
Subject: ARM: 5684/1: Add nuc960 platform to w90x900

Add nuc960 platform to w90x900.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/Kconfig          | 15 ++++++++++
 arch/arm/mach-w90x900/Makefile         |  2 ++
 arch/arm/mach-w90x900/mach-nuc960evb.c | 44 +++++++++++++++++++++++++++
 arch/arm/mach-w90x900/nuc960.c         | 54 ++++++++++++++++++++++++++++++++++
 arch/arm/mach-w90x900/nuc960.h         | 28 ++++++++++++++++++
 5 files changed, 143 insertions(+)
 create mode 100644 arch/arm/mach-w90x900/mach-nuc960evb.c
 create mode 100644 arch/arm/mach-w90x900/nuc960.c
 create mode 100644 arch/arm/mach-w90x900/nuc960.h

(limited to 'arch/arm')

diff --git a/arch/arm/mach-w90x900/Kconfig b/arch/arm/mach-w90x900/Kconfig
index 163b8010e57..69bab32a8bc 100644
--- a/arch/arm/mach-w90x900/Kconfig
+++ b/arch/arm/mach-w90x900/Kconfig
@@ -10,6 +10,11 @@ config CPU_NUC950
 	help
 	  Support for NUCP950 of Nuvoton NUC900 CPUs.
 
+config CPU_NUC960
+	bool
+	help
+	  Support for NUCP960 of Nuvoton NUC900 CPUs.
+
 menu "W90P910 Machines"
 
 config MACH_W90P910EVB
@@ -31,4 +36,14 @@ config MACH_W90P950EVB
 
 endmenu
 
+menu "NUC960 Machines"
+
+config MACH_W90N960EVB
+	bool "Nuvoton NUC960 Evaluation Board"
+	select CPU_NUC960
+	help
+	   Say Y here if you are using the Nuvoton NUC960EVB
+
+endmenu
+
 endif
diff --git a/arch/arm/mach-w90x900/Makefile b/arch/arm/mach-w90x900/Makefile
index a4622b577a2..828c0326441 100644
--- a/arch/arm/mach-w90x900/Makefile
+++ b/arch/arm/mach-w90x900/Makefile
@@ -10,8 +10,10 @@ obj-y				+= clksel.o dev.o cpu.o
 
 obj-$(CONFIG_CPU_W90P910)	+= nuc910.o
 obj-$(CONFIG_CPU_NUC950)	+= nuc950.o
+obj-$(CONFIG_CPU_NUC960)	+= nuc960.o
 
 # machine support
 
 obj-$(CONFIG_MACH_W90P910EVB)	+= mach-nuc910evb.o
 obj-$(CONFIG_MACH_W90P950EVB)	+= mach-nuc950evb.o
+obj-$(CONFIG_MACH_W90N960EVB)	+= mach-nuc960evb.o
diff --git a/arch/arm/mach-w90x900/mach-nuc960evb.c b/arch/arm/mach-w90x900/mach-nuc960evb.c
new file mode 100644
index 00000000000..e3a46f19f2b
--- /dev/null
+++ b/arch/arm/mach-w90x900/mach-nuc960evb.c
@@ -0,0 +1,44 @@
+/*
+ * linux/arch/arm/mach-w90x900/mach-nuc960evb.c
+ *
+ * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
+ *
+ * Copyright (C) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+#include <mach/map.h>
+
+#include "nuc960.h"
+
+static void __init nuc960evb_map_io(void)
+{
+	nuc960_map_io();
+	nuc960_init_clocks();
+}
+
+static void __init nuc960evb_init(void)
+{
+	nuc960_board_init();
+}
+
+MACHINE_START(W90N960EVB, "W90N960EVB")
+	/* Maintainer: Wan ZongShun */
+	.phys_io	= W90X900_PA_UART,
+	.io_pg_offst	= (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= 0,
+	.map_io		= nuc960evb_map_io,
+	.init_irq	= nuc900_init_irq,
+	.init_machine	= nuc960evb_init,
+	.timer		= &nuc900_timer,
+MACHINE_END
diff --git a/arch/arm/mach-w90x900/nuc960.c b/arch/arm/mach-w90x900/nuc960.c
new file mode 100644
index 00000000000..8851a3a27ce
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc960.c
@@ -0,0 +1,54 @@
+/*
+ * linux/arch/arm/mach-w90x900/nuc960.c
+ *
+ * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC960 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include "cpu.h"
+
+/* define specific CPU platform device */
+
+static struct platform_device *nuc960_dev[] __initdata = {
+	&nuc900_device_kpi,
+	&nuc900_device_fmi,
+};
+
+/* define specific CPU platform io map */
+
+static struct map_desc nuc960evb_iodesc[] __initdata = {
+};
+
+/*Init NUC960 evb io*/
+
+void __init nuc960_map_io(void)
+{
+	nuc900_map_io(nuc960evb_iodesc, ARRAY_SIZE(nuc960evb_iodesc));
+}
+
+/*Init NUC960 clock*/
+
+void __init nuc960_init_clocks(void)
+{
+	nuc900_init_clocks();
+}
+
+/*Init NUC960 board info*/
+
+void __init nuc960_board_init(void)
+{
+	nuc900_board_init(nuc960_dev, ARRAY_SIZE(nuc960_dev));
+}
diff --git a/arch/arm/mach-w90x900/nuc960.h b/arch/arm/mach-w90x900/nuc960.h
new file mode 100644
index 00000000000..f0c07cbe3a8
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc960.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-w90x900/nuc960.h
+ *
+ * Copyright (c) 2008 Nuvoton corporation
+ *
+ * Header file for NUC900 CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+struct map_desc;
+struct sys_timer;
+
+/* core initialisation functions */
+
+extern void nuc900_init_irq(void);
+extern struct sys_timer nuc900_timer;
+
+/* extern file from nuc960.c */
+
+extern void nuc960_board_init(void);
+extern void nuc960_init_clocks(void);
+extern void nuc960_map_io(void);
-- 
cgit v1.2.3


From 13f96d8f4c5a3f6a6b5e578d08869d79d690e0b2 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@cam.org>
Date: Tue, 1 Sep 2009 22:01:27 +0100
Subject: ARM: 5687/1: fix an oops with highmem

In xdr_partial_copy_from_skb() there is that sequence:

		kaddr = kmap_atomic(*ppage, KM_SKB_SUNRPC_DATA);
		[...]
		flush_dcache_page(*ppage);
		kunmap_atomic(kaddr, KM_SKB_SUNRPC_DATA);

Mixing flush_dcache_page() and kmap_atomic() is a bit odd,
especially since kunmap_atomic() must deal with cache issues
already.  OTOH the non-highmem case must use flush_dcache_page()
as kunmap_atomic() becomes a no op with no cache maintenance.

Problem is that with highmem the implementation of kmap_atomic()
doesn't set page->virtual, and page_address(page) returns 0 in
that case. Here flush_dcache_page() calls __flush_dcache_page()
which calls __cpuc_flush_dcache_page(page_address(page)) resulting
in a kernel oops.

None of the kmap_atomic() implementations uses set_page_address().
Hence we can assume page_address() is always expected to return 0 in
that case. Let's conditionally call __cpuc_flush_dcache_page() only
when the page address is non zero, and perform that test only when
highmem is configured.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/flush.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index c07222eb5ce..575f3ad722e 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -144,7 +144,14 @@ void __flush_dcache_page(struct address_space *mapping, struct page *page)
 	 * page.  This ensures that data in the physical page is mutually
 	 * coherent with the kernels mapping.
 	 */
-	__cpuc_flush_dcache_page(page_address(page));
+#ifdef CONFIG_HIGHMEM
+	/*
+	 * kmap_atomic() doesn't set the page virtual address, and
+	 * kunmap_atomic() takes care of cache flushing already.
+	 */
+	if (page_address(page))
+#endif
+		__cpuc_flush_dcache_page(page_address(page));
 
 	/*
 	 * If this is a page cache page, and we have an aliasing VIPT cache,
-- 
cgit v1.2.3


From d0420c83f39f79afb82010c2d2cafd150eef651b Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Wed, 2 Sep 2009 09:14:16 +0100
Subject: KEYS: Extend TIF_NOTIFY_RESUME to (almost) all architectures [try #6]

Implement TIF_NOTIFY_RESUME for most of those architectures in which isn't yet
available, and, whilst we're at it, have it call the appropriate tracehook.

After this patch, blackfin, m68k* and xtensa still lack support and need
alteration of assembly code to make it work.

Resume notification can then be used (by a later patch) to install a new
session keyring on the parent of a process.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>

cc: linux-arch@vger.kernel.org
Signed-off-by: James Morris <jmorris@namei.org>
---
 arch/arm/include/asm/thread_info.h | 3 +++
 arch/arm/kernel/entry-common.S     | 2 +-
 arch/arm/kernel/signal.c           | 5 +++++
 3 files changed, 9 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index 73394e50cbc..d3a39b1e6c0 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -130,11 +130,13 @@ extern void vfp_sync_state(struct thread_info *thread);
  *  TIF_SYSCALL_TRACE	- syscall trace active
  *  TIF_SIGPENDING	- signal pending
  *  TIF_NEED_RESCHED	- rescheduling necessary
+ *  TIF_NOTIFY_RESUME	- callback before returning to user
  *  TIF_USEDFPU		- FPU was used by this task this quantum (SMP)
  *  TIF_POLLING_NRFLAG	- true if poll_idle() is polling TIF_NEED_RESCHED
  */
 #define TIF_SIGPENDING		0
 #define TIF_NEED_RESCHED	1
+#define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
 #define TIF_SYSCALL_TRACE	8
 #define TIF_POLLING_NRFLAG	16
 #define TIF_USING_IWMMXT	17
@@ -143,6 +145,7 @@ extern void vfp_sync_state(struct thread_info *thread);
 
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
+#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
 #define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
 #define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
 #define _TIF_USING_IWMMXT	(1 << TIF_USING_IWMMXT)
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 8c3de1a350b..7813ab782fd 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -51,7 +51,7 @@ fast_work_pending:
 work_pending:
 	tst	r1, #_TIF_NEED_RESCHED
 	bne	work_resched
-	tst	r1, #_TIF_SIGPENDING
+	tst	r1, #_TIF_SIGPENDING|_TIF_NOTIFY_RESUME
 	beq	no_work_pending
 	mov	r0, sp				@ 'regs'
 	mov	r2, why				@ 'syscall'
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index f6bc5d44278..13dec276927 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -707,4 +707,9 @@ do_notify_resume(struct pt_regs *regs, unsigned int thread_flags, int syscall)
 {
 	if (thread_flags & _TIF_SIGPENDING)
 		do_signal(&current->blocked, regs, syscall);
+
+	if (thread_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
 }
-- 
cgit v1.2.3


From ee18d64c1f632043a02e6f5ba5e045bb26a5465f Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Wed, 2 Sep 2009 09:14:21 +0100
Subject: KEYS: Add a keyctl to install a process's session keyring on its
 parent [try #6]

Add a keyctl to install a process's session keyring onto its parent.  This
replaces the parent's session keyring.  Because the COW credential code does
not permit one process to change another process's credentials directly, the
change is deferred until userspace next starts executing again.  Normally this
will be after a wait*() syscall.

To support this, three new security hooks have been provided:
cred_alloc_blank() to allocate unset security creds, cred_transfer() to fill in
the blank security creds and key_session_to_parent() - which asks the LSM if
the process may replace its parent's session keyring.

The replacement may only happen if the process has the same ownership details
as its parent, and the process has LINK permission on the session keyring, and
the session keyring is owned by the process, and the LSM permits it.

Note that this requires alteration to each architecture's notify_resume path.
This has been done for all arches barring blackfin, m68k* and xtensa, all of
which need assembly alteration to support TIF_NOTIFY_RESUME.  This allows the
replacement to be performed at the point the parent process resumes userspace
execution.

This allows the userspace AFS pioctl emulation to fully emulate newpag() and
the VIOCSETTOK and VIOCSETTOK2 pioctls, all of which require the ability to
alter the parent process's PAG membership.  However, since kAFS doesn't use
PAGs per se, but rather dumps the keys into the session keyring, the session
keyring of the parent must be replaced if, for example, VIOCSETTOK is passed
the newpag flag.

This can be tested with the following program:

	#include <stdio.h>
	#include <stdlib.h>
	#include <keyutils.h>

	#define KEYCTL_SESSION_TO_PARENT	18

	#define OSERROR(X, S) do { if ((long)(X) == -1) { perror(S); exit(1); } } while(0)

	int main(int argc, char **argv)
	{
		key_serial_t keyring, key;
		long ret;

		keyring = keyctl_join_session_keyring(argv[1]);
		OSERROR(keyring, "keyctl_join_session_keyring");

		key = add_key("user", "a", "b", 1, keyring);
		OSERROR(key, "add_key");

		ret = keyctl(KEYCTL_SESSION_TO_PARENT);
		OSERROR(ret, "KEYCTL_SESSION_TO_PARENT");

		return 0;
	}

Compiled and linked with -lkeyutils, you should see something like:

	[dhowells@andromeda ~]$ keyctl show
	Session Keyring
	       -3 --alswrv   4043  4043  keyring: _ses
	355907932 --alswrv   4043    -1   \_ keyring: _uid.4043
	[dhowells@andromeda ~]$ /tmp/newpag
	[dhowells@andromeda ~]$ keyctl show
	Session Keyring
	       -3 --alswrv   4043  4043  keyring: _ses
	1055658746 --alswrv   4043  4043   \_ user: a
	[dhowells@andromeda ~]$ /tmp/newpag hello
	[dhowells@andromeda ~]$ keyctl show
	Session Keyring
	       -3 --alswrv   4043  4043  keyring: hello
	340417692 --alswrv   4043  4043   \_ user: a

Where the test program creates a new session keyring, sticks a user key named
'a' into it and then installs it on its parent.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
---
 arch/arm/kernel/signal.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 13dec276927..ea4ad3a43c8 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -711,5 +711,7 @@ do_notify_resume(struct pt_regs *regs, unsigned int thread_flags, int syscall)
 	if (thread_flags & _TIF_NOTIFY_RESUME) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(regs);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
 	}
 }
-- 
cgit v1.2.3


From 0e3eaadfe3da84f98250ad8a2c36e87fe00e42ee Mon Sep 17 00:00:00 2001
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
Date: Sat, 22 Aug 2009 13:30:11 +0530
Subject: ARM: OMAP4: Fix NULL pointer dereference crash.

After the patch series "[PATCH 00/14] OMAP PM fixes for .31-rc"
merge in 2.6.31-rc5, the kernel crashed during boot on OMAP4430.
This patch fixes it by adding UART4 support and related code.
Without this patch omap_serial_init() would produce " NULL pointer
dereference" and kernel crashes in the bootup on OMAP4430 platform.

Some more info on the merge issue can be found here.
More info- http://lkml.org/lkml/2009/8/20/192

Note: While merging this patch,"IO_ADDRESS" needs to be changed
to "OMAP2_IO_ADDRESS" if the Tony's below series is already merged in.
http://www.mail-archive.com/linux-omap@vger.kernel.org/msg15072.html

Signed-off-by: Syed Rafiuddin <rafiuddin.syed@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/serial.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index dd3c735b558..645546cbd26 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -113,6 +113,21 @@ static struct plat_serial8250_port serial_platform_data2[] = {
 	}
 };
 
+#ifdef CONFIG_ARCH_OMAP4
+static struct plat_serial8250_port serial_platform_data3[] = {
+	{
+		.membase	= IO_ADDRESS(OMAP_UART4_BASE),
+		.mapbase	= OMAP_UART4_BASE,
+		.irq		= 70,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= OMAP24XX_BASE_BAUD * 16,
+	}, {
+		.flags		= 0
+	}
+};
+#endif
 static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
 					   int offset)
 {
@@ -550,6 +565,17 @@ static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = {
 			},
 		},
 	},
+#ifdef CONFIG_ARCH_OMAP4
+	{
+		.pdev = {
+			.name			= "serial8250",
+			.id			= 3
+			.dev			= {
+				.platform_data	= serial_platform_data3,
+			},
+		},
+	},
+#endif
 };
 
 void __init omap_serial_init(void)
-- 
cgit v1.2.3


From aae290fb4d64e2b09b659f4b8a7f9d2547ef63b1 Mon Sep 17 00:00:00 2001
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
Date: Sat, 22 Aug 2009 13:30:12 +0530
Subject: ARM: OMAP4: Bypass the clock check.

Second reason of OMAP4 boot failure on 2.6.31.rc6, the UART
platform data is not getting registered to kernel.
Registration was failing because of clock check failure in
omap_serial_init().
Below patch fix the same.

OMAP4 clock framework patches are still getting discussed on mailing
list so till then we need this.

Signed-off-by: Syed Rafiuddin <rafiuddin.syed@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/serial.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 645546cbd26..0f508109adc 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -609,8 +609,11 @@ void __init omap_serial_init(void)
 			uart->fck = NULL;
 		}
 
-		if (!uart->ick || !uart->fck)
-			continue;
+		/* FIXME: Remove this once the clkdev is ready */
+		if (!cpu_is_omap44xx()) {
+			if (!uart->ick || !uart->fck)
+				continue;
+		}
 
 		uart->num = i;
 		p->private_data = uart;
-- 
cgit v1.2.3


From 24bcadb6508b7c0f7307749228841fe04af6d70f Mon Sep 17 00:00:00 2001
From: Vikram Pandita <vikram.pandita@ti.com>
Date: Fri, 21 Aug 2009 13:11:06 -0500
Subject: OMAP: Zoom2: update serial platform_data id for external UART

Now that on-chip UARTs each have separate platform_data, the external
UART needs an non-conflicting ID.  Since there are 3 on-chip UARTs,
the Zoom2 external UART will be registered after as the fourth.

Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/board-zoom-debugboard.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
index f546063775b..e0948c92298 100644
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -96,7 +96,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 
 static struct platform_device zoom2_debugboard_serial_device = {
 	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM1,
+	.id			= 3,
 	.dev			= {
 		.platform_data	= serial_platform_data,
 	},
-- 
cgit v1.2.3


From bbde6ebae6dacf2f6e6ac4ab28c1805a2d51c5e1 Mon Sep 17 00:00:00 2001
From: Anand Gadiyar <gadiyar@ti.com>
Date: Mon, 24 Aug 2009 17:36:37 +0530
Subject: MUSB: Remove usb_musb_pm_init() call

In usb_musb_pm_init, we attempt to access an MUSB register
when the i-clock may not be on, or the module is otherwise
not accessible.

We need to either:
- enable the clock before this access, or
- remove this code and move it to the bootloader, or
- enable the clock in the bootloader

If we enable the clock in the bootloader, we might as well
add the workaround in the bootloader itself. This code will
anyway be changed once hwmod is in place, so remove it for now

This allows us to boot the kernel on certain OMAP3 boards with
a bootloader that doesn't enable this clock. Without this, we
will need to upgrade the bootloaders on these boards.

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/usb-musb.c | 12 ------------
 1 file changed, 12 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 739e59e8025..1145a2562b0 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -31,15 +31,6 @@
 #include <mach/mux.h>
 #include <mach/usb.h>
 
-#define OTG_SYSCONFIG	(OMAP34XX_HSUSB_OTG_BASE + 0x404)
-
-static void __init usb_musb_pm_init(void)
-{
-	/* Ensure force-idle mode for OTG controller */
-	if (cpu_is_omap34xx())
-		omap_writel(0, OTG_SYSCONFIG);
-}
-
 #ifdef CONFIG_USB_MUSB_SOC
 
 static struct resource musb_resources[] = {
@@ -173,13 +164,10 @@ void __init usb_musb_init(void)
 		printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
 		return;
 	}
-
-	usb_musb_pm_init();
 }
 
 #else
 void __init usb_musb_init(void)
 {
-	usb_musb_pm_init();
 }
 #endif /* CONFIG_USB_MUSB_SOC */
-- 
cgit v1.2.3


From 5110b2980a1299f6c253260de385b0dc2b2308b0 Mon Sep 17 00:00:00 2001
From: "Reddy, Teerth" <teerth@ti.com>
Date: Mon, 24 Aug 2009 11:58:59 +0530
Subject: OMAP3: PM: add T2 interrupt line mux setting, and enable on 3430SDP

This patch changes for setting the padconf value for sys_nirq line
which is connected to T2 INTR1.  This will fix the T2 keypad wakeup
issue on OMAP3 SDP.

Signed-off-by: Teerth Reddy <teerth@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/board-3430sdp.c   | 6 ++++++
 arch/arm/mach-omap2/mux.c             | 5 +++++
 arch/arm/plat-omap/include/mach/mux.h | 3 +++
 3 files changed, 14 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 7e9b76cc767..31d9f56c648 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -473,6 +473,11 @@ static inline void board_smc91x_init(void)
 
 #endif
 
+static void enable_board_wakeup_source(void)
+{
+	omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */
+}
+
 static void __init omap_3430sdp_init(void)
 {
 	omap3430_i2c_init();
@@ -490,6 +495,7 @@ static void __init omap_3430sdp_init(void)
 	omap_serial_init();
 	usb_musb_init();
 	board_smc91x_init();
+	enable_board_wakeup_source();
 }
 
 static void __init omap_3430sdp_map_io(void)
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index f63f3a23782..2daa595aaff 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -542,6 +542,11 @@ MUX_CFG_34XX("AF13_3430_MMC3_DAT2", 0x5e8,
 		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
 MUX_CFG_34XX("AF13_3430_MMC3_DAT3", 0x5e2,
 		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
+
+/* SYS_NIRQ T2 INT1 */
+MUX_CFG_34XX("AF26_34XX_SYS_NIRQ", 0x1E0,
+		OMAP3_WAKEUP_EN | OMAP34XX_PIN_INPUT_PULLUP |
+		OMAP34XX_MUX_MODE0)
 };
 
 #define OMAP34XX_PINS_SZ	ARRAY_SIZE(omap34xx_pins)
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
index 2c57bad65b0..98dfab651df 100644
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -885,6 +885,9 @@ enum omap34xx_index {
 	AH9_3430_MMC3_DAT1,
 	AF13_3430_MMC3_DAT2,
 	AF13_3430_MMC3_DAT3,
+
+	/* SYS_NIRQ T2 INT1 */
+	AF26_34XX_SYS_NIRQ,
 };
 
 struct omap_mux_cfg {
-- 
cgit v1.2.3


From 2fcc81a38b699a81e47fdd655cf514c789576554 Mon Sep 17 00:00:00 2001
From: Vikram Pandita <vikram.pandita@ti.com>
Date: Fri, 21 Aug 2009 13:11:20 -0500
Subject: OMAP: Zoom2: release debug board detect gpio line

Release the Dbg board detection gpio once its purpose is served

Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/board-zoom-debugboard.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
index e0948c92298..1f13e2a1f32 100644
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -129,6 +129,7 @@ static inline void __init zoom2_init_quaduart(void)
 static inline int omap_zoom2_debugboard_detect(void)
 {
 	int debug_board_detect = 0;
+	int ret = 1;
 
 	debug_board_detect = ZOOM2_SMSC911X_GPIO;
 
@@ -140,10 +141,10 @@ static inline int omap_zoom2_debugboard_detect(void)
 	gpio_direction_input(debug_board_detect);
 
 	if (!gpio_get_value(debug_board_detect)) {
-		gpio_free(debug_board_detect);
-		return 0;
+		ret = 0;
 	}
-	return 1;
+	gpio_free(debug_board_detect);
+	return ret;
 }
 
 static struct platform_device *zoom2_devices[] __initdata = {
-- 
cgit v1.2.3


From d3d381c6365ef5b06c4184a3fe047cf027533970 Mon Sep 17 00:00:00 2001
From: Ming Lei <tom.leiming@gmail.com>
Date: Sat, 22 Aug 2009 21:20:26 +0800
Subject: OMAP3: PM: fix lockdep warning caused by omap3_pm_init

This patch uses kmalloc(size,GFP_ATOMIC) instead of kmalloc(size,GFP_KERNEL)
to allocate memory for instance of struct power_state in pwrdms_setup(),
since it may be called by pwrdm_for_each() with irq disabled.

It is a easy fix for the following lockdep warning caused by
kmalloc(size,GFP_KERNEL) in pwrdms_setup():

Power Management for TI OMAP3.
------------[ cut here ]------------
WARNING: at kernel/lockdep.c:2282 lockdep_trace_alloc+0xe8/0xfc()
Modules linked in:
[<c0032ccc>] (unwind_backtrace+0x0/0xec) from [<c0056934>] (warn_slowpath_common+0x48/0x60)
[<c0056934>] (warn_slowpath_common+0x48/0x60) from [<c007da10>] (lockdep_trace_alloc+0xe8/0xfc)
[<c007da10>] (lockdep_trace_alloc+0xe8/0xfc) from [<c00cd9bc>] (kmem_cache_alloc+0x28/0x178)
[<c00cd9bc>] (kmem_cache_alloc+0x28/0x178) from [<c000f184>] (pwrdms_setup+0x30/0xf8)
[<c000f184>] (pwrdms_setup+0x30/0xf8) from [<c00381c4>] (pwrdm_for_each+0x64/0x84)
[<c00381c4>] (pwrdm_for_each+0x64/0x84) from [<c000ef60>] (omap3_pm_init+0x3f4/0x5ac)
[<c000ef60>] (omap3_pm_init+0x3f4/0x5ac) from [<c002c2c0>] (do_one_initcall+0x30/0x1d4)
[<c002c2c0>] (do_one_initcall+0x30/0x1d4) from [<c00088d8>] (kernel_init+0xa4/0x118)
[<c00088d8>] (kernel_init+0xa4/0x118) from [<c002ddf8>] (kernel_thread_exit+0x0/0x8)
---[ end trace 1e06f8d97dc5a19b ]---

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/pm34xx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 488d595d8e4..d67b781045b 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -665,7 +665,7 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm)
 	if (!pwrdm->pwrsts)
 		return 0;
 
-	pwrst = kmalloc(sizeof(struct power_state), GFP_KERNEL);
+	pwrst = kmalloc(sizeof(struct power_state), GFP_ATOMIC);
 	if (!pwrst)
 		return -ENOMEM;
 	pwrst->pwrdm = pwrdm;
-- 
cgit v1.2.3


From ba20bb126940ce4847e146a0d00b7f7b0868d773 Mon Sep 17 00:00:00 2001
From: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com>
Date: Wed, 15 Oct 2008 17:48:43 +0300
Subject: OMAP: PM counter infrastructure.

This patch provides the infrastructure to count how many times a
powerdomain entered a given power state (on, inactive, retention,
off). A number of functions are provided which will be called by the
chip specific powerdomain and clockdomain code whenever a transition
might have happened.

Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/clockdomain.c             |   2 +
 arch/arm/mach-omap2/powerdomain.c             | 101 +++++++++++++++++++++++++-
 arch/arm/plat-omap/include/mach/powerdomain.h |   7 ++
 3 files changed, 108 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 0e7d501865b..26912a95dc1 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -484,6 +484,8 @@ void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
 			    v << __ffs(clkdm->clktrctrl_mask),
 			    clkdm->pwrdm.ptr->prcm_offs,
 			    CM_CLKSTCTRL);
+
+	pwrdm_clkdm_state_switch(clkdm);
 }
 
 /**
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 983f1cb676b..a2d98718c6d 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -35,6 +35,11 @@
 #include <mach/powerdomain.h>
 #include <mach/clockdomain.h>
 
+enum {
+	PWRDM_STATE_NOW = 0,
+	PWRDM_STATE_PREV,
+};
+
 /* pwrdm_list contains all registered struct powerdomains */
 static LIST_HEAD(pwrdm_list);
 
@@ -102,6 +107,63 @@ static struct powerdomain *_pwrdm_deps_lookup(struct powerdomain *pwrdm,
 	return pd->pwrdm;
 }
 
+static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag)
+{
+
+	int prev;
+	int state;
+
+	if (pwrdm == NULL)
+		return -EINVAL;
+
+	state = pwrdm_read_pwrst(pwrdm);
+
+	switch (flag) {
+	case PWRDM_STATE_NOW:
+		prev = pwrdm->state;
+		break;
+	case PWRDM_STATE_PREV:
+		prev = pwrdm_read_prev_pwrst(pwrdm);
+		if (pwrdm->state != prev)
+			pwrdm->state_counter[prev]++;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (state != prev)
+		pwrdm->state_counter[state]++;
+
+	pwrdm->state = state;
+
+	return 0;
+}
+
+static int _pwrdm_pre_transition_cb(struct powerdomain *pwrdm)
+{
+	pwrdm_clear_all_prev_pwrst(pwrdm);
+	_pwrdm_state_switch(pwrdm, PWRDM_STATE_NOW);
+	return 0;
+}
+
+static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm)
+{
+	_pwrdm_state_switch(pwrdm, PWRDM_STATE_PREV);
+	return 0;
+}
+
+static __init void _pwrdm_setup(struct powerdomain *pwrdm)
+{
+	int i;
+
+	for (i = 0; i < 4; i++)
+		pwrdm->state_counter[i] = 0;
+
+	pwrdm_wait_transition(pwrdm);
+	pwrdm->state = pwrdm_read_pwrst(pwrdm);
+	pwrdm->state_counter[pwrdm->state] = 1;
+
+}
 
 /* Public functions */
 
@@ -117,9 +179,12 @@ void pwrdm_init(struct powerdomain **pwrdm_list)
 {
 	struct powerdomain **p = NULL;
 
-	if (pwrdm_list)
-		for (p = pwrdm_list; *p; p++)
+	if (pwrdm_list) {
+		for (p = pwrdm_list; *p; p++) {
 			pwrdm_register(*p);
+			_pwrdm_setup(*p);
+		}
+	}
 }
 
 /**
@@ -1110,4 +1175,36 @@ int pwrdm_wait_transition(struct powerdomain *pwrdm)
 	return 0;
 }
 
+int pwrdm_state_switch(struct powerdomain *pwrdm)
+{
+	return _pwrdm_state_switch(pwrdm, PWRDM_STATE_NOW);
+}
+
+int pwrdm_clkdm_state_switch(struct clockdomain *clkdm)
+{
+	if (clkdm != NULL && clkdm->pwrdm.ptr != NULL) {
+		pwrdm_wait_transition(clkdm->pwrdm.ptr);
+		return pwrdm_state_switch(clkdm->pwrdm.ptr);
+	}
+
+	return -EINVAL;
+}
+int pwrdm_clk_state_switch(struct clk *clk)
+{
+	if (clk != NULL && clk->clkdm != NULL)
+		return pwrdm_clkdm_state_switch(clk->clkdm);
+	return -EINVAL;
+}
+
+int pwrdm_pre_transition(void)
+{
+	pwrdm_for_each(_pwrdm_pre_transition_cb);
+	return 0;
+}
+
+int pwrdm_post_transition(void)
+{
+	pwrdm_for_each(_pwrdm_post_transition_cb);
+	return 0;
+}
 
diff --git a/arch/arm/plat-omap/include/mach/powerdomain.h b/arch/arm/plat-omap/include/mach/powerdomain.h
index 69c9e675d8e..52663fc549d 100644
--- a/arch/arm/plat-omap/include/mach/powerdomain.h
+++ b/arch/arm/plat-omap/include/mach/powerdomain.h
@@ -117,6 +117,8 @@ struct powerdomain {
 
 	struct list_head node;
 
+	int state;
+	unsigned state_counter[4];
 };
 
 
@@ -164,4 +166,9 @@ bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm);
 
 int pwrdm_wait_transition(struct powerdomain *pwrdm);
 
+int pwrdm_state_switch(struct powerdomain *pwrdm);
+int pwrdm_clkdm_state_switch(struct clockdomain *clkdm);
+int pwrdm_pre_transition(void);
+int pwrdm_post_transition(void);
+
 #endif
-- 
cgit v1.2.3


From fe617af716bc09cbbdd11ad820d5818017a9f481 Mon Sep 17 00:00:00 2001
From: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com>
Date: Wed, 15 Oct 2008 17:48:44 +0300
Subject: OMAP: PM: Hook into PM counters

This patch modifies the clock, clockdomain and OMAP3 specific
powerdomain code to call the PM counter infrastructure whenever one or
more powerdomains might have changed state.

Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/clock.c       | 2 ++
 arch/arm/mach-omap2/clockdomain.c | 3 +++
 arch/arm/mach-omap2/pm34xx.c      | 6 ++++++
 3 files changed, 11 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 456e2ad5f62..f2a92d614f0 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -1043,5 +1043,7 @@ void omap2_clk_disable_unused(struct clk *clk)
 		omap2_clk_disable(clk);
 	} else
 		_omap2_clk_disable(clk);
+	if (clk->clkdm != NULL)
+		pwrdm_clkdm_state_switch(clk->clkdm);
 }
 #endif
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 26912a95dc1..5b0b90b76e1 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -574,6 +574,7 @@ int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk)
 		omap2_clkdm_wakeup(clkdm);
 
 	pwrdm_wait_transition(clkdm->pwrdm.ptr);
+	pwrdm_clkdm_state_switch(clkdm);
 
 	return 0;
 }
@@ -626,6 +627,8 @@ int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk)
 	else
 		omap2_clkdm_sleep(clkdm);
 
+	pwrdm_clkdm_state_switch(clkdm);
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 488d595d8e4..f1976242f99 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -170,6 +170,8 @@ static void omap_sram_idle(void)
 		printk(KERN_ERR "Invalid mpu state in sram_idle\n");
 		return;
 	}
+	pwrdm_pre_transition();
+
 	omap2_gpio_prepare_for_retention();
 	omap_uart_prepare_idle(0);
 	omap_uart_prepare_idle(1);
@@ -182,6 +184,9 @@ static void omap_sram_idle(void)
 	omap_uart_resume_idle(1);
 	omap_uart_resume_idle(0);
 	omap2_gpio_resume_after_retention();
+
+	pwrdm_post_transition();
+
 }
 
 /*
@@ -271,6 +276,7 @@ static int set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
 	if (sleep_switch) {
 		omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]);
 		pwrdm_wait_transition(pwrdm);
+		pwrdm_state_switch(pwrdm);
 	}
 
 err:
-- 
cgit v1.2.3


From a23456e9b02b3fae0fc78cb33fad69803a50e5bc Mon Sep 17 00:00:00 2001
From: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com>
Date: Wed, 15 Oct 2008 18:13:47 +0300
Subject: OMAP: PM: Add closures to clkdm_for_each and pwrdm_for_each.

Add some infrastructure to easily iterate over clock and power
domains.

Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/clockdomain.c             | 5 +++--
 arch/arm/mach-omap2/pm24xx.c                  | 4 ++--
 arch/arm/mach-omap2/pm34xx.c                  | 8 ++++----
 arch/arm/plat-omap/include/mach/clockdomain.h | 3 ++-
 arch/arm/plat-omap/include/mach/powerdomain.h | 3 ++-
 5 files changed, 13 insertions(+), 10 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 5b0b90b76e1..4ef7b4f5474 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -299,7 +299,8 @@ struct clockdomain *clkdm_lookup(const char *name)
  * anything else to indicate failure; or -EINVAL if the function pointer
  * is null.
  */
-int clkdm_for_each(int (*fn)(struct clockdomain *clkdm))
+int clkdm_for_each(int (*fn)(struct clockdomain *clkdm, void *user),
+			void *user)
 {
 	struct clockdomain *clkdm;
 	int ret = 0;
@@ -309,7 +310,7 @@ int clkdm_for_each(int (*fn)(struct clockdomain *clkdm))
 
 	mutex_lock(&clkdm_mutex);
 	list_for_each_entry(clkdm, &clkdm_list, node) {
-		ret = (*fn)(clkdm);
+		ret = (*fn)(clkdm, user);
 		if (ret)
 			break;
 	}
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index 528dbdc26e2..bff5c4e8974 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -333,7 +333,7 @@ static struct platform_suspend_ops omap_pm_ops = {
 	.valid		= suspend_valid_only_mem,
 };
 
-static int _pm_clkdm_enable_hwsup(struct clockdomain *clkdm)
+static int _pm_clkdm_enable_hwsup(struct clockdomain *clkdm, void *unused)
 {
 	omap2_clkdm_allow_idle(clkdm);
 	return 0;
@@ -385,7 +385,7 @@ static void __init prcm_setup_regs(void)
 	omap2_clkdm_sleep(gfx_clkdm);
 
 	/* Enable clockdomain hardware-supervised control for all clkdms */
-	clkdm_for_each(_pm_clkdm_enable_hwsup);
+	clkdm_for_each(_pm_clkdm_enable_hwsup, NULL);
 
 	/* Enable clock autoidle for all domains */
 	cm_write_mod_reg(OMAP24XX_AUTO_CAM |
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index f1976242f99..331dfca93ed 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -664,7 +664,7 @@ static void __init prcm_setup_regs(void)
 	omap3_d2d_idle();
 }
 
-static int __init pwrdms_setup(struct powerdomain *pwrdm)
+static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
 {
 	struct power_state *pwrst;
 
@@ -689,7 +689,7 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm)
  * supported. Initiate sleep transition for other clockdomains, if
  * they are not used
  */
-static int __init clkdms_setup(struct clockdomain *clkdm)
+static int __init clkdms_setup(struct clockdomain *clkdm, void *unused)
 {
 	if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO)
 		omap2_clkdm_allow_idle(clkdm);
@@ -722,13 +722,13 @@ static int __init omap3_pm_init(void)
 		goto err1;
 	}
 
-	ret = pwrdm_for_each(pwrdms_setup);
+	ret = pwrdm_for_each(pwrdms_setup, NULL);
 	if (ret) {
 		printk(KERN_ERR "Failed to setup powerdomains\n");
 		goto err2;
 	}
 
-	(void) clkdm_for_each(clkdms_setup);
+	(void) clkdm_for_each(clkdms_setup, NULL);
 
 	mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
 	if (mpu_pwrdm == NULL) {
diff --git a/arch/arm/plat-omap/include/mach/clockdomain.h b/arch/arm/plat-omap/include/mach/clockdomain.h
index b9d0dd2da89..99ebd886f13 100644
--- a/arch/arm/plat-omap/include/mach/clockdomain.h
+++ b/arch/arm/plat-omap/include/mach/clockdomain.h
@@ -95,7 +95,8 @@ int clkdm_register(struct clockdomain *clkdm);
 int clkdm_unregister(struct clockdomain *clkdm);
 struct clockdomain *clkdm_lookup(const char *name);
 
-int clkdm_for_each(int (*fn)(struct clockdomain *clkdm));
+int clkdm_for_each(int (*fn)(struct clockdomain *clkdm, void *user),
+			void *user);
 struct powerdomain *clkdm_get_pwrdm(struct clockdomain *clkdm);
 
 void omap2_clkdm_allow_idle(struct clockdomain *clkdm);
diff --git a/arch/arm/plat-omap/include/mach/powerdomain.h b/arch/arm/plat-omap/include/mach/powerdomain.h
index 52663fc549d..de03f3dbbf3 100644
--- a/arch/arm/plat-omap/include/mach/powerdomain.h
+++ b/arch/arm/plat-omap/include/mach/powerdomain.h
@@ -128,7 +128,8 @@ int pwrdm_register(struct powerdomain *pwrdm);
 int pwrdm_unregister(struct powerdomain *pwrdm);
 struct powerdomain *pwrdm_lookup(const char *name);
 
-int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm));
+int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
+			void *user);
 
 int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
 int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
-- 
cgit v1.2.3


From 331b93f41dff21c8f95709032cb184fb82bf2003 Mon Sep 17 00:00:00 2001
From: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com>
Date: Wed, 15 Oct 2008 18:13:48 +0300
Subject: OMAP: PM: Add pm-debug counters

This patch provides the debugfs entries and a function which will be
called by the PM code to register the time spent per domain per
state. Also some new fields are added to the powerdomain struct to
keep the time information.

NOTE: As of v2.6.29, using getnstimeofday() after drivers are
suspended is no longer safe since the timekeeping subsystem is also
suspended as part of the suspend process.  Instead use sched_clock()
which on OMAP returns the 32k SYNC timer in nanoseconds.

Also, do not print out status for meta powerdomains (dpll*)

Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com>
Signed-off-by: Tero Kristo <tero.kristo@nokia.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/pm-debug.c                | 178 +++++++++++++++++++++++++-
 arch/arm/mach-omap2/pm.h                      |   4 +
 arch/arm/plat-omap/include/mach/powerdomain.h |   5 +
 3 files changed, 186 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index da3a53f8ccc..7383e85eac2 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -20,13 +20,15 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/timer.h>
+#include <linux/sched.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
 
 #include <mach/clock.h>
 #include <mach/board.h>
+#include <mach/powerdomain.h>
+#include <mach/clockdomain.h>
 
 #include "prm.h"
 #include "cm.h"
@@ -150,3 +152,177 @@ void omap2_pm_dump(int mode, int resume, unsigned int us)
 	for (i = 0; i < reg_count; i++)
 		printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val);
 }
+
+#ifdef CONFIG_DEBUG_FS
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+struct dentry *pm_dbg_dir;
+
+static int pm_dbg_init_done;
+
+enum {
+	DEBUG_FILE_COUNTERS = 0,
+	DEBUG_FILE_TIMERS,
+};
+
+static const char pwrdm_state_names[][4] = {
+	"OFF",
+	"RET",
+	"INA",
+	"ON"
+};
+
+void pm_dbg_update_time(struct powerdomain *pwrdm, int prev)
+{
+	s64 t;
+
+	if (!pm_dbg_init_done)
+		return ;
+
+	/* Update timer for previous state */
+	t = sched_clock();
+
+	pwrdm->state_timer[prev] += t - pwrdm->timer;
+
+	pwrdm->timer = t;
+}
+
+static int clkdm_dbg_show_counter(struct clockdomain *clkdm, void *user)
+{
+	struct seq_file *s = (struct seq_file *)user;
+
+	if (strcmp(clkdm->name, "emu_clkdm") == 0 ||
+		strcmp(clkdm->name, "wkup_clkdm") == 0 ||
+		strncmp(clkdm->name, "dpll", 4) == 0)
+		return 0;
+
+	seq_printf(s, "%s->%s (%d)", clkdm->name,
+			clkdm->pwrdm.ptr->name,
+			atomic_read(&clkdm->usecount));
+	seq_printf(s, "\n");
+
+	return 0;
+}
+
+static int pwrdm_dbg_show_counter(struct powerdomain *pwrdm, void *user)
+{
+	struct seq_file *s = (struct seq_file *)user;
+	int i;
+
+	if (strcmp(pwrdm->name, "emu_pwrdm") == 0 ||
+		strcmp(pwrdm->name, "wkup_pwrdm") == 0 ||
+		strncmp(pwrdm->name, "dpll", 4) == 0)
+		return 0;
+
+	if (pwrdm->state != pwrdm_read_pwrst(pwrdm))
+		printk(KERN_ERR "pwrdm state mismatch(%s) %d != %d\n",
+			pwrdm->name, pwrdm->state, pwrdm_read_pwrst(pwrdm));
+
+	seq_printf(s, "%s (%s)", pwrdm->name,
+			pwrdm_state_names[pwrdm->state]);
+	for (i = 0; i < 4; i++)
+		seq_printf(s, ",%s:%d", pwrdm_state_names[i],
+			pwrdm->state_counter[i]);
+
+	seq_printf(s, "\n");
+
+	return 0;
+}
+
+static int pwrdm_dbg_show_timer(struct powerdomain *pwrdm, void *user)
+{
+	struct seq_file *s = (struct seq_file *)user;
+	int i;
+
+	if (strcmp(pwrdm->name, "emu_pwrdm") == 0 ||
+		strcmp(pwrdm->name, "wkup_pwrdm") == 0 ||
+		strncmp(pwrdm->name, "dpll", 4) == 0)
+		return 0;
+
+	pwrdm_state_switch(pwrdm);
+
+	seq_printf(s, "%s (%s)", pwrdm->name,
+		pwrdm_state_names[pwrdm->state]);
+
+	for (i = 0; i < 4; i++)
+		seq_printf(s, ",%s:%lld", pwrdm_state_names[i],
+			pwrdm->state_timer[i]);
+
+	seq_printf(s, "\n");
+	return 0;
+}
+
+static int pm_dbg_show_counters(struct seq_file *s, void *unused)
+{
+	pwrdm_for_each(pwrdm_dbg_show_counter, s);
+	clkdm_for_each(clkdm_dbg_show_counter, s);
+
+	return 0;
+}
+
+static int pm_dbg_show_timers(struct seq_file *s, void *unused)
+{
+	pwrdm_for_each(pwrdm_dbg_show_timer, s);
+	return 0;
+}
+
+static int pm_dbg_open(struct inode *inode, struct file *file)
+{
+	switch ((int)inode->i_private) {
+	case DEBUG_FILE_COUNTERS:
+		return single_open(file, pm_dbg_show_counters,
+			&inode->i_private);
+	case DEBUG_FILE_TIMERS:
+	default:
+		return single_open(file, pm_dbg_show_timers,
+			&inode->i_private);
+	};
+}
+
+static const struct file_operations debug_fops = {
+	.open           = pm_dbg_open,
+	.read           = seq_read,
+	.llseek         = seq_lseek,
+	.release        = single_release,
+};
+
+static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
+{
+	int i;
+	s64 t;
+
+	t = sched_clock();
+
+	for (i = 0; i < 4; i++)
+		pwrdm->state_timer[i] = 0;
+
+	pwrdm->timer = t;
+
+	return 0;
+}
+
+static int __init pm_dbg_init(void)
+{
+	struct dentry *d;
+
+	d = debugfs_create_dir("pm_debug", NULL);
+	if (IS_ERR(d))
+		return PTR_ERR(d);
+
+	(void) debugfs_create_file("count", S_IRUGO,
+		d, (void *)DEBUG_FILE_COUNTERS, &debug_fops);
+	(void) debugfs_create_file("time", S_IRUGO,
+		d, (void *)DEBUG_FILE_TIMERS, &debug_fops);
+
+	pwrdm_for_each(pwrdms_setup, NULL);
+
+	pm_dbg_init_done = 1;
+
+	return 0;
+}
+late_initcall(pm_dbg_init);
+
+#else
+void pm_dbg_update_time(struct powerdomain *pwrdm, int prev) {}
+#endif
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 21201cd4117..4589db1c8af 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -11,12 +11,16 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_PM_H
 #define __ARCH_ARM_MACH_OMAP2_PM_H
 
+#include <mach/powerdomain.h>
+
 #ifdef CONFIG_PM_DEBUG
 extern void omap2_pm_dump(int mode, int resume, unsigned int us);
 extern int omap2_pm_debug;
+extern void pm_dbg_update_time(struct powerdomain *pwrdm, int prev);
 #else
 #define omap2_pm_dump(mode, resume, us)		do {} while (0);
 #define omap2_pm_debug				0
+#define pm_dbg_update_time(pwrdm, prev) do {} while (0);
 #endif /* CONFIG_PM_DEBUG */
 
 extern void omap24xx_idle_loop_suspend(void);
diff --git a/arch/arm/plat-omap/include/mach/powerdomain.h b/arch/arm/plat-omap/include/mach/powerdomain.h
index de03f3dbbf3..6271d8556a4 100644
--- a/arch/arm/plat-omap/include/mach/powerdomain.h
+++ b/arch/arm/plat-omap/include/mach/powerdomain.h
@@ -119,6 +119,11 @@ struct powerdomain {
 
 	int state;
 	unsigned state_counter[4];
+
+#ifdef CONFIG_PM_DEBUG
+	s64 timer;
+	s64 state_timer[4];
+#endif
 };
 
 
-- 
cgit v1.2.3


From 6199ab2690ca6f44f838603da079b3faa837e502 Mon Sep 17 00:00:00 2001
From: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com>
Date: Wed, 15 Oct 2008 18:13:49 +0300
Subject: OMAP: PM debug: make powerdomains use PM-debug counters

Make the powerdomain code call the new hook for updating the time.
Also implement the updated pwrdm_for_each.

Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/powerdomain.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index a2d98718c6d..5a6cef3e42b 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -35,6 +35,8 @@
 #include <mach/powerdomain.h>
 #include <mach/clockdomain.h>
 
+#include "pm.h"
+
 enum {
 	PWRDM_STATE_NOW = 0,
 	PWRDM_STATE_PREV,
@@ -134,19 +136,21 @@ static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag)
 	if (state != prev)
 		pwrdm->state_counter[state]++;
 
+	pm_dbg_update_time(pwrdm, prev);
+
 	pwrdm->state = state;
 
 	return 0;
 }
 
-static int _pwrdm_pre_transition_cb(struct powerdomain *pwrdm)
+static int _pwrdm_pre_transition_cb(struct powerdomain *pwrdm, void *unused)
 {
 	pwrdm_clear_all_prev_pwrst(pwrdm);
 	_pwrdm_state_switch(pwrdm, PWRDM_STATE_NOW);
 	return 0;
 }
 
-static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm)
+static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm, void *unused)
 {
 	_pwrdm_state_switch(pwrdm, PWRDM_STATE_PREV);
 	return 0;
@@ -282,7 +286,8 @@ struct powerdomain *pwrdm_lookup(const char *name)
  * anything else to indicate failure; or -EINVAL if the function
  * pointer is null.
  */
-int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm))
+int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
+			void *user)
 {
 	struct powerdomain *temp_pwrdm;
 	unsigned long flags;
@@ -293,7 +298,7 @@ int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm))
 
 	read_lock_irqsave(&pwrdm_rwlock, flags);
 	list_for_each_entry(temp_pwrdm, &pwrdm_list, node) {
-		ret = (*fn)(temp_pwrdm);
+		ret = (*fn)(temp_pwrdm, user);
 		if (ret)
 			break;
 	}
@@ -1198,13 +1203,13 @@ int pwrdm_clk_state_switch(struct clk *clk)
 
 int pwrdm_pre_transition(void)
 {
-	pwrdm_for_each(_pwrdm_pre_transition_cb);
+	pwrdm_for_each(_pwrdm_pre_transition_cb, NULL);
 	return 0;
 }
 
 int pwrdm_post_transition(void)
 {
-	pwrdm_for_each(_pwrdm_post_transition_cb);
+	pwrdm_for_each(_pwrdm_post_transition_cb, NULL);
 	return 0;
 }
 
-- 
cgit v1.2.3


From 2811d6b3237c9b77007a6b2b10ee5b576da0574e Mon Sep 17 00:00:00 2001
From: Tero Kristo <tero.kristo@nokia.com>
Date: Wed, 29 Oct 2008 13:31:24 +0200
Subject: OMAP: PM debug: Add PRCM register dump support

Allows dumping out current register contents from the debug filesystem, and
also allows user to add arbitrary register save points into code. Current
register contents are available under debugfs at:

[debugfs]/pm_debug/registers/current

To add a save point, do following:

From module init (or somewhere before the save call, called only once):
  pm_dbg_init_regset(n); // n=1..4, allocates memory for dump area #n

From arbitrary code location:
  pm_dbg_regset_save(n); // n=1..4, saves registers to dump area #n

After this, the register dump can be seen under [debugfs]/pm_debug/registers/n

Signed-off-by: Tero Kristo <tero.kristo@nokia.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/pm-debug.c | 226 ++++++++++++++++++++++++++++++++++++++++-
 arch/arm/mach-omap2/pm.h       |   4 +
 2 files changed, 229 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 7383e85eac2..982aa67f268 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -52,6 +52,8 @@ int omap2_pm_debug;
 	regs[reg_count].name = #reg; \
 	regs[reg_count++].val = __raw_readl(OMAP2_IO_ADDRESS(0x480fe000 + (off)))
 
+static int __init pm_dbg_init(void);
+
 void omap2_pm_dump(int mode, int resume, unsigned int us)
 {
 	struct reg {
@@ -157,6 +159,8 @@ void omap2_pm_dump(int mode, int resume, unsigned int us)
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
 
+static void pm_dbg_regset_store(u32 *ptr);
+
 struct dentry *pm_dbg_dir;
 
 static int pm_dbg_init_done;
@@ -166,6 +170,160 @@ enum {
 	DEBUG_FILE_TIMERS,
 };
 
+struct pm_module_def {
+	char name[8]; /* Name of the module */
+	short type; /* CM or PRM */
+	unsigned short offset;
+	int low; /* First register address on this module */
+	int high; /* Last register address on this module */
+};
+
+#define MOD_CM 0
+#define MOD_PRM 1
+
+static const struct pm_module_def *pm_dbg_reg_modules;
+static const struct pm_module_def omap3_pm_reg_modules[] = {
+	{ "IVA2", MOD_CM, OMAP3430_IVA2_MOD, 0, 0x4c },
+	{ "OCP", MOD_CM, OCP_MOD, 0, 0x10 },
+	{ "MPU", MOD_CM, MPU_MOD, 4, 0x4c },
+	{ "CORE", MOD_CM, CORE_MOD, 0, 0x4c },
+	{ "SGX", MOD_CM, OMAP3430ES2_SGX_MOD, 0, 0x4c },
+	{ "WKUP", MOD_CM, WKUP_MOD, 0, 0x40 },
+	{ "CCR", MOD_CM, PLL_MOD, 0, 0x70 },
+	{ "DSS", MOD_CM, OMAP3430_DSS_MOD, 0, 0x4c },
+	{ "CAM", MOD_CM, OMAP3430_CAM_MOD, 0, 0x4c },
+	{ "PER", MOD_CM, OMAP3430_PER_MOD, 0, 0x4c },
+	{ "EMU", MOD_CM, OMAP3430_EMU_MOD, 0x40, 0x54 },
+	{ "NEON", MOD_CM, OMAP3430_NEON_MOD, 0x20, 0x48 },
+	{ "USB", MOD_CM, OMAP3430ES2_USBHOST_MOD, 0, 0x4c },
+
+	{ "IVA2", MOD_PRM, OMAP3430_IVA2_MOD, 0x50, 0xfc },
+	{ "OCP", MOD_PRM, OCP_MOD, 4, 0x1c },
+	{ "MPU", MOD_PRM, MPU_MOD, 0x58, 0xe8 },
+	{ "CORE", MOD_PRM, CORE_MOD, 0x58, 0xf8 },
+	{ "SGX", MOD_PRM, OMAP3430ES2_SGX_MOD, 0x58, 0xe8 },
+	{ "WKUP", MOD_PRM, WKUP_MOD, 0xa0, 0xb0 },
+	{ "CCR", MOD_PRM, PLL_MOD, 0x40, 0x70 },
+	{ "DSS", MOD_PRM, OMAP3430_DSS_MOD, 0x58, 0xe8 },
+	{ "CAM", MOD_PRM, OMAP3430_CAM_MOD, 0x58, 0xe8 },
+	{ "PER", MOD_PRM, OMAP3430_PER_MOD, 0x58, 0xe8 },
+	{ "EMU", MOD_PRM, OMAP3430_EMU_MOD, 0x58, 0xe4 },
+	{ "GLBL", MOD_PRM, OMAP3430_GR_MOD, 0x20, 0xe4 },
+	{ "NEON", MOD_PRM, OMAP3430_NEON_MOD, 0x58, 0xe8 },
+	{ "USB", MOD_PRM, OMAP3430ES2_USBHOST_MOD, 0x58, 0xe8 },
+	{ "", 0, 0, 0, 0 },
+};
+
+#define PM_DBG_MAX_REG_SETS 4
+
+static void *pm_dbg_reg_set[PM_DBG_MAX_REG_SETS];
+
+static int pm_dbg_get_regset_size(void)
+{
+	static int regset_size;
+
+	if (regset_size == 0) {
+		int i = 0;
+
+		while (pm_dbg_reg_modules[i].name[0] != 0) {
+			regset_size += pm_dbg_reg_modules[i].high +
+				4 - pm_dbg_reg_modules[i].low;
+			i++;
+		}
+	}
+	return regset_size;
+}
+
+static int pm_dbg_show_regs(struct seq_file *s, void *unused)
+{
+	int i, j;
+	unsigned long val;
+	int reg_set = (int)s->private;
+	u32 *ptr;
+	void *store = NULL;
+	int regs;
+	int linefeed;
+
+	if (reg_set == 0) {
+		store = kmalloc(pm_dbg_get_regset_size(), GFP_KERNEL);
+		ptr = store;
+		pm_dbg_regset_store(ptr);
+	} else {
+		ptr = pm_dbg_reg_set[reg_set - 1];
+	}
+
+	i = 0;
+
+	while (pm_dbg_reg_modules[i].name[0] != 0) {
+		regs = 0;
+		linefeed = 0;
+		if (pm_dbg_reg_modules[i].type == MOD_CM)
+			seq_printf(s, "MOD: CM_%s (%08x)\n",
+				pm_dbg_reg_modules[i].name,
+				(u32)(OMAP3430_CM_BASE +
+				pm_dbg_reg_modules[i].offset));
+		else
+			seq_printf(s, "MOD: PRM_%s (%08x)\n",
+				pm_dbg_reg_modules[i].name,
+				(u32)(OMAP3430_PRM_BASE +
+				pm_dbg_reg_modules[i].offset));
+
+		for (j = pm_dbg_reg_modules[i].low;
+			j <= pm_dbg_reg_modules[i].high; j += 4) {
+			val = *(ptr++);
+			if (val != 0) {
+				regs++;
+				if (linefeed) {
+					seq_printf(s, "\n");
+					linefeed = 0;
+				}
+				seq_printf(s, "  %02x => %08lx", j, val);
+				if (regs % 4 == 0)
+					linefeed = 1;
+			}
+		}
+		seq_printf(s, "\n");
+		i++;
+	}
+
+	if (store != NULL)
+		kfree(store);
+
+	return 0;
+}
+
+static void pm_dbg_regset_store(u32 *ptr)
+{
+	int i, j;
+	u32 val;
+
+	i = 0;
+
+	while (pm_dbg_reg_modules[i].name[0] != 0) {
+		for (j = pm_dbg_reg_modules[i].low;
+			j <= pm_dbg_reg_modules[i].high; j += 4) {
+			if (pm_dbg_reg_modules[i].type == MOD_CM)
+				val = cm_read_mod_reg(
+					pm_dbg_reg_modules[i].offset, j);
+			else
+				val = prm_read_mod_reg(
+					pm_dbg_reg_modules[i].offset, j);
+			*(ptr++) = val;
+		}
+		i++;
+	}
+}
+
+int pm_dbg_regset_save(int reg_set)
+{
+	if (pm_dbg_reg_set[reg_set-1] == NULL)
+		return -EINVAL;
+
+	pm_dbg_regset_store(pm_dbg_reg_set[reg_set-1]);
+
+	return 0;
+}
+
 static const char pwrdm_state_names[][4] = {
 	"OFF",
 	"RET",
@@ -280,6 +438,11 @@ static int pm_dbg_open(struct inode *inode, struct file *file)
 	};
 }
 
+static int pm_dbg_reg_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, pm_dbg_show_regs, inode->i_private);
+}
+
 static const struct file_operations debug_fops = {
 	.open           = pm_dbg_open,
 	.read           = seq_read,
@@ -287,6 +450,40 @@ static const struct file_operations debug_fops = {
 	.release        = single_release,
 };
 
+static const struct file_operations debug_reg_fops = {
+	.open           = pm_dbg_reg_open,
+	.read           = seq_read,
+	.llseek         = seq_lseek,
+	.release        = single_release,
+};
+
+int pm_dbg_regset_init(int reg_set)
+{
+	char name[2];
+
+	if (!pm_dbg_init_done)
+		pm_dbg_init();
+
+	if (reg_set < 1 || reg_set > PM_DBG_MAX_REG_SETS ||
+		pm_dbg_reg_set[reg_set-1] != NULL)
+		return -EINVAL;
+
+	pm_dbg_reg_set[reg_set-1] =
+		kmalloc(pm_dbg_get_regset_size(), GFP_KERNEL);
+
+	if (pm_dbg_reg_set[reg_set-1] == NULL)
+		return -ENOMEM;
+
+	if (pm_dbg_dir != NULL) {
+		sprintf(name, "%d", reg_set);
+
+		(void) debugfs_create_file(name, S_IRUGO,
+			pm_dbg_dir, (void *)reg_set, &debug_reg_fops);
+	}
+
+	return 0;
+}
+
 static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
 {
 	int i;
@@ -304,8 +501,20 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
 
 static int __init pm_dbg_init(void)
 {
+	int i;
 	struct dentry *d;
+	char name[2];
 
+	if (pm_dbg_init_done)
+		return 0;
+
+	if (cpu_is_omap34xx())
+		pm_dbg_reg_modules = omap3_pm_reg_modules;
+	else {
+		printk(KERN_ERR "%s: only OMAP3 supported\n", __func__);
+		return -ENODEV;
+	}
+		
 	d = debugfs_create_dir("pm_debug", NULL);
 	if (IS_ERR(d))
 		return PTR_ERR(d);
@@ -317,11 +526,26 @@ static int __init pm_dbg_init(void)
 
 	pwrdm_for_each(pwrdms_setup, NULL);
 
+	pm_dbg_dir = debugfs_create_dir("registers", d);
+	if (IS_ERR(pm_dbg_dir))
+		return PTR_ERR(pm_dbg_dir);
+
+	(void) debugfs_create_file("current", S_IRUGO,
+		pm_dbg_dir, (void *)0, &debug_reg_fops);
+
+	for (i = 0; i < PM_DBG_MAX_REG_SETS; i++)
+		if (pm_dbg_reg_set[i] != NULL) {
+			sprintf(name, "%d", i+1);
+			(void) debugfs_create_file(name, S_IRUGO,
+				pm_dbg_dir, (void *)(i+1), &debug_reg_fops);
+
+		}
+
 	pm_dbg_init_done = 1;
 
 	return 0;
 }
-late_initcall(pm_dbg_init);
+arch_initcall(pm_dbg_init);
 
 #else
 void pm_dbg_update_time(struct powerdomain *pwrdm, int prev) {}
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 4589db1c8af..8fa85677018 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -17,10 +17,14 @@
 extern void omap2_pm_dump(int mode, int resume, unsigned int us);
 extern int omap2_pm_debug;
 extern void pm_dbg_update_time(struct powerdomain *pwrdm, int prev);
+extern int pm_dbg_regset_save(int reg_set);
+extern int pm_dbg_regset_init(int reg_set);
 #else
 #define omap2_pm_dump(mode, resume, us)		do {} while (0);
 #define omap2_pm_debug				0
 #define pm_dbg_update_time(pwrdm, prev) do {} while (0);
+#define pm_dbg_regset_save(reg_set) do {} while (0);
+#define pm_dbg_regset_init(reg_set) do {} while (0);
 #endif /* CONFIG_PM_DEBUG */
 
 extern void omap24xx_idle_loop_suspend(void);
-- 
cgit v1.2.3


From 68d4778c701b7e22ddfd64e3afb6628c92718ad2 Mon Sep 17 00:00:00 2001
From: Tero Kristo <tero.kristo@nokia.com>
Date: Wed, 26 Nov 2008 12:26:24 +0200
Subject: OMAP: PM: Added suspend target state control to debugfs for OMAP3

Target state can be read / programmed via files under:
  [debugfs]/pm_debug/[pwrdm]/suspend

Signed-off-by: Tero Kristo <tero.kristo@nokia.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/pm-debug.c | 31 +++++++++++++++++++++++++++++--
 arch/arm/mach-omap2/pm.h       |  3 +++
 arch/arm/mach-omap2/pm34xx.c   | 24 ++++++++++++++++++++++++
 3 files changed, 56 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 982aa67f268..1b4c1600f8d 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -24,6 +24,7 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/module.h>
 
 #include <mach/clock.h>
 #include <mach/board.h>
@@ -484,10 +485,28 @@ int pm_dbg_regset_init(int reg_set)
 	return 0;
 }
 
-static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
+static int pwrdm_suspend_get(void *data, u64 *val)
+{
+	*val = omap3_pm_get_suspend_state((struct powerdomain *)data);
+
+	if (*val >= 0)
+		return 0;
+	return *val;
+}
+
+static int pwrdm_suspend_set(void *data, u64 val)
+{
+	return omap3_pm_set_suspend_state((struct powerdomain *)data, (int)val);
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(pwrdm_suspend_fops, pwrdm_suspend_get,
+			pwrdm_suspend_set, "%llu\n");
+
+static int __init pwrdms_setup(struct powerdomain *pwrdm, void *dir)
 {
 	int i;
 	s64 t;
+	struct dentry *d;
 
 	t = sched_clock();
 
@@ -496,6 +515,14 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
 
 	pwrdm->timer = t;
 
+	if (strncmp(pwrdm->name, "dpll", 4) == 0)
+		return 0;
+
+	d = debugfs_create_dir(pwrdm->name, (struct dentry *)dir);
+
+	(void) debugfs_create_file("suspend", S_IRUGO|S_IWUSR, d,
+			(void *)pwrdm, &pwrdm_suspend_fops);
+
 	return 0;
 }
 
@@ -524,7 +551,7 @@ static int __init pm_dbg_init(void)
 	(void) debugfs_create_file("time", S_IRUGO,
 		d, (void *)DEBUG_FILE_TIMERS, &debug_fops);
 
-	pwrdm_for_each(pwrdms_setup, NULL);
+	pwrdm_for_each(pwrdms_setup, (void *)d);
 
 	pm_dbg_dir = debugfs_create_dir("registers", d);
 	if (IS_ERR(pm_dbg_dir))
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 8fa85677018..8400f576892 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -13,6 +13,9 @@
 
 #include <mach/powerdomain.h>
 
+extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm);
+extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state);
+
 #ifdef CONFIG_PM_DEBUG
 extern void omap2_pm_dump(int mode, int resume, unsigned int us);
 extern int omap2_pm_debug;
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 331dfca93ed..26f2aca9abe 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -664,6 +664,30 @@ static void __init prcm_setup_regs(void)
 	omap3_d2d_idle();
 }
 
+int omap3_pm_get_suspend_state(struct powerdomain *pwrdm)
+{
+	struct power_state *pwrst;
+
+	list_for_each_entry(pwrst, &pwrst_list, node) {
+		if (pwrst->pwrdm == pwrdm)
+			return pwrst->next_state;
+	}
+	return -EINVAL;
+}
+
+int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state)
+{
+	struct power_state *pwrst;
+
+	list_for_each_entry(pwrst, &pwrst_list, node) {
+		if (pwrst->pwrdm == pwrdm) {
+			pwrst->next_state = state;
+			return 0;
+		}
+	}
+	return -EINVAL;
+}
+
 static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
 {
 	struct power_state *pwrst;
-- 
cgit v1.2.3


From 5d113262ee9e074e0d36362d878892819bfdeb47 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Thu, 3 Sep 2009 20:13:53 +0300
Subject: OMAP: powerdomain: Fix overflow when doing powerdomain deps lookups.

At the end of the list pd is a pointer to a NULL struct, so checking
if the address == NULL doesn't help here. In fact the original code
will just keep running past the struct to read who knows what in
memory.

This case manifests itself when from clkdms_setup() when enabling auto
idle for a clock domain and the clockdomain usecount is greater than
0. When _clkdm_add_autodeps() tries to add the a dependency that does
not exist in the powerdomain->wkdep_srcs array the for loop will run
past the wkdep_srcs array.

Currently in linux-omap you won't hit this because the not found case
is never executed, unless you start modifying powerdomains and their
wakeup/sleep deps.

Signed-off-by: Mike Chan <mike@android.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/powerdomain.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 983f1cb676b..66206b6357f 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -83,7 +83,7 @@ static struct powerdomain *_pwrdm_deps_lookup(struct powerdomain *pwrdm,
 	if (!pwrdm || !deps || !omap_chip_is(pwrdm->omap_chip))
 		return ERR_PTR(-EINVAL);
 
-	for (pd = deps; pd; pd++) {
+	for (pd = deps; pd->pwrdm_name; pd++) {
 
 		if (!omap_chip_is(pd->omap_chip))
 			continue;
@@ -96,7 +96,7 @@ static struct powerdomain *_pwrdm_deps_lookup(struct powerdomain *pwrdm,
 
 	}
 
-	if (!pd)
+	if (!pd->pwrdm_name)
 		return ERR_PTR(-ENOENT);
 
 	return pd->pwrdm;
-- 
cgit v1.2.3


From 6dda2d4b1306c19e39496e9bb305424d1d547013 Mon Sep 17 00:00:00 2001
From: Tero Kristo <tero.kristo@nokia.com>
Date: Thu, 3 Sep 2009 20:13:56 +0300
Subject: OMAP: SDRC: Add several new register definitions

Add missing SDRC register offset macros.

Signed-off-by: Tero Kristo <tero.kristo@nokia.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
[paul@pwsan.com: added commit message]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/plat-omap/include/mach/sdrc.h | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
index 93f70d2cbce..1c09c78a48f 100644
--- a/arch/arm/plat-omap/include/mach/sdrc.h
+++ b/arch/arm/plat-omap/include/mach/sdrc.h
@@ -21,19 +21,28 @@
 /* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
 
 #define SDRC_SYSCONFIG		0x010
+#define SDRC_CS_CFG		0x040
+#define SDRC_SHARING		0x044
+#define SDRC_ERR_TYPE		0x04C
 #define SDRC_DLLA_CTRL		0x060
 #define SDRC_DLLA_STATUS	0x064
 #define SDRC_DLLB_CTRL		0x068
 #define SDRC_DLLB_STATUS	0x06C
 #define SDRC_POWER		0x070
+#define SDRC_MCFG_0		0x080
 #define SDRC_MR_0		0x084
+#define SDRC_EMR2_0		0x08c
 #define SDRC_ACTIM_CTRL_A_0	0x09c
 #define SDRC_ACTIM_CTRL_B_0	0x0a0
 #define SDRC_RFR_CTRL_0		0x0a4
+#define SDRC_MANUAL_0		0x0a8
+#define SDRC_MCFG_1		0x0B0
 #define SDRC_MR_1		0x0B4
+#define SDRC_EMR2_1		0x0BC
 #define SDRC_ACTIM_CTRL_A_1	0x0C4
 #define SDRC_ACTIM_CTRL_B_1	0x0C8
 #define SDRC_RFR_CTRL_1		0x0D4
+#define SDRC_MANUAL_1		0x0D8
 
 /*
  * These values represent the number of memory clock cycles between
-- 
cgit v1.2.3


From 11b66383aa722a3321d2aeec09808c5b140ad396 Mon Sep 17 00:00:00 2001
From: Sanjeev Premi <premi@ti.com>
Date: Thu, 3 Sep 2009 20:13:58 +0300
Subject: OMAP3 clock: Fixed processing of bootarg 'mpurate'

The argument 'mpurate' had no effect on the MPU
frequency. This patch fixes the same.

Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/clock34xx.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index cd7819cc0c9..fafcd32e690 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -27,6 +27,7 @@
 #include <linux/limits.h>
 #include <linux/bitops.h>
 
+#include <mach/cpu.h>
 #include <mach/clock.h>
 #include <mach/sram.h>
 #include <asm/div64.h>
@@ -1067,17 +1068,17 @@ static int __init omap2_clk_arch_init(void)
 		return -EINVAL;
 
 	/* REVISIT: not yet ready for 343x */
-#if 0
-	if (clk_set_rate(&virt_prcm_set, mpurate))
-		printk(KERN_ERR "Could not find matching MPU rate\n");
-#endif
+	if (clk_set_rate(&dpll1_ck, mpurate))
+		printk(KERN_ERR "*** Unable to set MPU rate\n");
 
 	recalculate_root_clocks();
 
-	printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL3/MPU): "
+	printk(KERN_INFO "Switched to new clocking rate (Crystal/Core/MPU): "
 	       "%ld.%01ld/%ld/%ld MHz\n",
-	       (osc_sys_ck.rate / 1000000), (osc_sys_ck.rate / 100000) % 10,
-	       (core_ck.rate / 1000000), (dpll1_fck.rate / 1000000)) ;
+	       (osc_sys_ck.rate / 1000000), ((osc_sys_ck.rate / 100000) % 10),
+	       (core_ck.rate / 1000000), (arm_fck.rate / 1000000)) ;
+
+	calibrate_delay();
 
 	return 0;
 }
@@ -1136,7 +1137,7 @@ int __init omap2_clk_init(void)
 
 	recalculate_root_clocks();
 
-	printk(KERN_INFO "Clocking rate (Crystal/DPLL/ARM core): "
+	printk(KERN_INFO "Clocking rate (Crystal/Core/MPU): "
 	       "%ld.%01ld/%ld/%ld MHz\n",
 	       (osc_sys_ck.rate / 1000000), (osc_sys_ck.rate / 100000) % 10,
 	       (core_ck.rate / 1000000), (arm_fck.rate / 1000000));
-- 
cgit v1.2.3


From 19f4d3a90bf2815cb97b66e603b5e0311d234458 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Thu, 3 Sep 2009 20:14:00 +0300
Subject: OMAP clock: associate MPU clocks with the mpu_clkdm

All MPU-related clocks should be in the mpu_clkdm.  This is needed for the
upcoming omap_hwmod patches, which needs to know the clockdomain that arm_fck
is in.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/clock34xx.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 57cc2725b92..9a823c341b7 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -1020,6 +1020,7 @@ static struct clk arm_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
 	.clksel_mask	= OMAP3430_ST_MPU_CLK_MASK,
 	.clksel		= arm_fck_clksel,
+	.clkdm_name	= "mpu_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
-- 
cgit v1.2.3


From 08e3d5f28d4d696dc559898676019cbd36501025 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Thu, 3 Sep 2009 20:14:00 +0300
Subject: OMAP3 clock: remove superfluous calls to omap2_init_clk_clkdm

omap2_init_clk_clkdm() is called as part of the chip architecture-specific
initialization code, so calling it again from the struct clk init pointer
just wastes cycles.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/clock34xx.h | 20 --------------------
 1 file changed, 20 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 9a823c341b7..c8119781e00 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -1156,7 +1156,6 @@ static struct clk gfx_cg1_ck = {
 	.name		= "gfx_cg1_ck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &gfx_l3_fck, /* REVISIT: correct? */
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430ES1_EN_2D_SHIFT,
 	.clkdm_name	= "gfx_3430es1_clkdm",
@@ -1167,7 +1166,6 @@ static struct clk gfx_cg2_ck = {
 	.name		= "gfx_cg2_ck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &gfx_l3_fck, /* REVISIT: correct? */
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430ES1_EN_3D_SHIFT,
 	.clkdm_name	= "gfx_3430es1_clkdm",
@@ -1211,7 +1209,6 @@ static struct clk sgx_ick = {
 	.name		= "sgx_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l3_ick,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_SHIFT,
 	.clkdm_name	= "sgx_clkdm",
@@ -1224,7 +1221,6 @@ static struct clk d2d_26m_fck = {
 	.name		= "d2d_26m_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &sys_ck,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430ES1_EN_D2D_SHIFT,
 	.clkdm_name	= "d2d_clkdm",
@@ -1235,7 +1231,6 @@ static struct clk modem_fck = {
 	.name		= "modem_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &sys_ck,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_MODEM_SHIFT,
 	.clkdm_name	= "d2d_clkdm",
@@ -1623,7 +1618,6 @@ static struct clk core_l3_ick = {
 	.name		= "core_l3_ick",
 	.ops		= &clkops_null,
 	.parent		= &l3_ick,
-	.init		= &omap2_init_clk_clkdm,
 	.clkdm_name	= "core_l3_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1692,7 +1686,6 @@ static struct clk core_l4_ick = {
 	.name		= "core_l4_ick",
 	.ops		= &clkops_null,
 	.parent		= &l4_ick,
-	.init		= &omap2_init_clk_clkdm,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2090,7 +2083,6 @@ static struct clk dss_tv_fck = {
 	.name		= "dss_tv_fck",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &omap_54m_fck,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_TV_SHIFT,
 	.clkdm_name	= "dss_clkdm",
@@ -2101,7 +2093,6 @@ static struct clk dss_96m_fck = {
 	.name		= "dss_96m_fck",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &omap_96m_fck,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_TV_SHIFT,
 	.clkdm_name	= "dss_clkdm",
@@ -2112,7 +2103,6 @@ static struct clk dss2_alwon_fck = {
 	.name		= "dss2_alwon_fck",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &sys_ck,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_DSS2_SHIFT,
 	.clkdm_name	= "dss_clkdm",
@@ -2124,7 +2114,6 @@ static struct clk dss_ick_3430es1 = {
 	.name		= "dss_ick",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &l4_ick,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
 	.clkdm_name	= "dss_clkdm",
@@ -2136,7 +2125,6 @@ static struct clk dss_ick_3430es2 = {
 	.name		= "dss_ick",
 	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
 	.parent		= &l4_ick,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
 	.clkdm_name	= "dss_clkdm",
@@ -2160,7 +2148,6 @@ static struct clk cam_ick = {
 	.name		= "cam_ick",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &l4_ick,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_CAM_SHIFT,
 	.clkdm_name	= "cam_clkdm",
@@ -2171,7 +2158,6 @@ static struct clk csi2_96m_fck = {
 	.name		= "csi2_96m_fck",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &core_96m_fck,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_CSI2_SHIFT,
 	.clkdm_name	= "cam_clkdm",
@@ -2184,7 +2170,6 @@ static struct clk usbhost_120m_fck = {
 	.name		= "usbhost_120m_fck",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &dpll5_m2_ck,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430ES2_EN_USBHOST2_SHIFT,
 	.clkdm_name	= "usbhost_clkdm",
@@ -2195,7 +2180,6 @@ static struct clk usbhost_48m_fck = {
 	.name		= "usbhost_48m_fck",
 	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
 	.parent		= &omap_48m_fck,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430ES2_EN_USBHOST1_SHIFT,
 	.clkdm_name	= "usbhost_clkdm",
@@ -2207,7 +2191,6 @@ static struct clk usbhost_ick = {
 	.name		= "usbhost_ick",
 	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
 	.parent		= &l4_ick,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430ES2_EN_USBHOST_SHIFT,
 	.clkdm_name	= "usbhost_clkdm",
@@ -2269,7 +2252,6 @@ static struct clk gpt1_fck = {
 static struct clk wkup_32k_fck = {
 	.name		= "wkup_32k_fck",
 	.ops		= &clkops_null,
-	.init		= &omap2_init_clk_clkdm,
 	.parent		= &omap_32k_fck,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
@@ -2384,7 +2366,6 @@ static struct clk per_96m_fck = {
 	.name		= "per_96m_fck",
 	.ops		= &clkops_null,
 	.parent		= &omap_96m_alwon_fck,
-	.init		= &omap2_init_clk_clkdm,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2393,7 +2374,6 @@ static struct clk per_48m_fck = {
 	.name		= "per_48m_fck",
 	.ops		= &clkops_null,
 	.parent		= &omap_48m_fck,
-	.init		= &omap2_init_clk_clkdm,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
-- 
cgit v1.2.3


From c0407a96d04794be586eab4a412320079446cf93 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Thu, 3 Sep 2009 20:14:01 +0300
Subject: OMAP2/3 PM: create the OMAP PM interface and add a default OMAP PM
 no-op layer
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The interface provides device drivers, CPUFreq, and DSPBridge with a
means of controlling OMAP power management parameters that are not yet
supported by the Linux PM PMQoS interface.  Copious documentation is
in the patch in Documentation/arm/OMAP/omap_pm and the interface
header file, arch/arm/plat-omap/include/mach/omap-pm.h.

Thanks to Rajendra Nayak <rnayak@ti.com> for adding CORE (VDD2) OPP
support and moving the OPP table initialization earlier in the event
that the clock code needs them.  Thanks to Tero Kristo
<tero.kristo@nokia.com> for fixing the parameter check in
omap_pm_set_min_bus_tput().  Jouni signed off on Tero's patch.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Tero Kristo <tero.kristo@nokia.com>
Signed-off-by: Jouni Högander <jouni.hogander@nokia.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Igor Stoppa <igor.stoppa@nokia.com>
Cc: Richard Woodruff <r-woodruff2@ti.com>
Cc: Anand Sawant <sawant@ti.com>
Cc: Sakari Poussa <sakari.poussa@nokia.com>
Cc: Veeramanikandan Raju <veera@ti.com>
Cc: Karthik Dasu <karthik-dp@ti.com>
---
 arch/arm/mach-omap2/io.c                  |   4 +
 arch/arm/plat-omap/Kconfig                |  13 ++
 arch/arm/plat-omap/Makefile               |   1 +
 arch/arm/plat-omap/include/mach/omap-pm.h | 301 ++++++++++++++++++++++++++++++
 arch/arm/plat-omap/omap-pm-noop.c         | 296 +++++++++++++++++++++++++++++
 5 files changed, 615 insertions(+)
 create mode 100644 arch/arm/plat-omap/include/mach/omap-pm.h
 create mode 100644 arch/arm/plat-omap/omap-pm-noop.c

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index e9b9bcb19b4..4bfe873e1b8 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -36,6 +36,7 @@
 #ifndef CONFIG_ARCH_OMAP4	/* FIXME: Remove this once clkdev is ready */
 #include "clock.h"
 
+#include <mach/omap-pm.h>
 #include <mach/powerdomain.h>
 
 #include "powerdomains.h"
@@ -281,9 +282,12 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 {
 	omap2_mux_init();
 #ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */
+	/* The OPP tables have to be registered before a clk init */
+	omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps);
 	pwrdm_init(powerdomains_omap);
 	clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
 	omap2_clk_init();
+	omap_pm_if_init();
 	omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
 	_omap2_init_reprogram_sdrc();
 #endif
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index ab9f9efc9b6..64b3f52bd9b 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -187,6 +187,19 @@ config OMAP_SERIAL_WAKE
 	  to data on the serial RX line. This allows you to wake the
 	  system from serial console.
 
+choice
+	prompt "OMAP PM layer selection"
+	depends on ARCH_OMAP
+	default OMAP_PM_NOOP
+
+config OMAP_PM_NONE
+	bool "No PM layer"
+
+config OMAP_PM_NOOP
+	bool "No-op/debug PM layer"
+
+endchoice
+
 endmenu
 
 endif
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 769a4c20036..5e10d0a2eb8 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -26,3 +26,4 @@ obj-y += $(i2c-omap-m) $(i2c-omap-y)
 # OMAP mailbox framework
 obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o
 
+obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o
\ No newline at end of file
diff --git a/arch/arm/plat-omap/include/mach/omap-pm.h b/arch/arm/plat-omap/include/mach/omap-pm.h
new file mode 100644
index 00000000000..3ee41d71149
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap-pm.h
@@ -0,0 +1,301 @@
+/*
+ * omap-pm.h - OMAP power management interface
+ *
+ * Copyright (C) 2008-2009 Texas Instruments, Inc.
+ * Copyright (C) 2008-2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * Interface developed by (in alphabetical order): Karthik Dasu, Jouni
+ * Högander, Tony Lindgren, Rajendra Nayak, Sakari Poussa,
+ * Veeramanikandan Raju, Anand Sawant, Igor Stoppa, Paul Walmsley,
+ * Richard Woodruff
+ */
+
+#ifndef ASM_ARM_ARCH_OMAP_OMAP_PM_H
+#define ASM_ARM_ARCH_OMAP_OMAP_PM_H
+
+#include <linux/device.h>
+#include <linux/cpufreq.h>
+
+#include "powerdomain.h"
+
+/**
+ * struct omap_opp - clock frequency-to-OPP ID table for DSP, MPU
+ * @rate: target clock rate
+ * @opp_id: OPP ID
+ * @min_vdd: minimum VDD1 voltage (in millivolts) for this OPP
+ *
+ * Operating performance point data.  Can vary by OMAP chip and board.
+ */
+struct omap_opp {
+	unsigned long rate;
+	u8 opp_id;
+	u16 min_vdd;
+};
+
+extern struct omap_opp *mpu_opps;
+extern struct omap_opp *dsp_opps;
+extern struct omap_opp *l3_opps;
+
+/*
+ * agent_id values for use with omap_pm_set_min_bus_tput():
+ *
+ * OCP_INITIATOR_AGENT is only valid for devices that can act as
+ * initiators -- it represents the device's L3 interconnect
+ * connection.  OCP_TARGET_AGENT represents the device's L4
+ * interconnect connection.
+ */
+#define OCP_TARGET_AGENT		1
+#define OCP_INITIATOR_AGENT		2
+
+/**
+ * omap_pm_if_early_init - OMAP PM init code called before clock fw init
+ * @mpu_opp_table: array ptr to struct omap_opp for MPU
+ * @dsp_opp_table: array ptr to struct omap_opp for DSP
+ * @l3_opp_table : array ptr to struct omap_opp for CORE
+ *
+ * Initialize anything that must be configured before the clock
+ * framework starts.  The "_if_" is to avoid name collisions with the
+ * PM idle-loop code.
+ */
+int __init omap_pm_if_early_init(struct omap_opp *mpu_opp_table,
+				 struct omap_opp *dsp_opp_table,
+				 struct omap_opp *l3_opp_table);
+
+/**
+ * omap_pm_if_init - OMAP PM init code called after clock fw init
+ *
+ * The main initialization code.  OPP tables are passed in here.  The
+ * "_if_" is to avoid name collisions with the PM idle-loop code.
+ */
+int __init omap_pm_if_init(void);
+
+/**
+ * omap_pm_if_exit - OMAP PM exit code
+ *
+ * Exit code; currently unused.  The "_if_" is to avoid name
+ * collisions with the PM idle-loop code.
+ */
+void omap_pm_if_exit(void);
+
+/*
+ * Device-driver-originated constraints (via board-*.c files, platform_data)
+ */
+
+
+/**
+ * omap_pm_set_max_mpu_wakeup_lat - set the maximum MPU wakeup latency
+ * @dev: struct device * requesting the constraint
+ * @t: maximum MPU wakeup latency in microseconds
+ *
+ * Request that the maximum interrupt latency for the MPU to be no
+ * greater than 't' microseconds. "Interrupt latency" in this case is
+ * defined as the elapsed time from the occurrence of a hardware or
+ * timer interrupt to the time when the device driver's interrupt
+ * service routine has been entered by the MPU.
+ *
+ * It is intended that underlying PM code will use this information to
+ * determine what power state to put the MPU powerdomain into, and
+ * possibly the CORE powerdomain as well, since interrupt handling
+ * code currently runs from SDRAM.  Advanced PM or board*.c code may
+ * also configure interrupt controller priorities, OCP bus priorities,
+ * CPU speed(s), etc.
+ *
+ * This function will not affect device wakeup latency, e.g., time
+ * elapsed from when a device driver enables a hardware device with
+ * clk_enable(), to when the device is ready for register access or
+ * other use.  To control this device wakeup latency, use
+ * set_max_dev_wakeup_lat()
+ *
+ * Multiple calls to set_max_mpu_wakeup_lat() will replace the
+ * previous t value.  To remove the latency target for the MPU, call
+ * with t = -1.
+ *
+ * No return value.
+ */
+void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t);
+
+
+/**
+ * omap_pm_set_min_bus_tput - set minimum bus throughput needed by device
+ * @dev: struct device * requesting the constraint
+ * @tbus_id: interconnect to operate on (OCP_{INITIATOR,TARGET}_AGENT)
+ * @r: minimum throughput (in KiB/s)
+ *
+ * Request that the minimum data throughput on the OCP interconnect
+ * attached to device 'dev' interconnect agent 'tbus_id' be no less
+ * than 'r' KiB/s.
+ *
+ * It is expected that the OMAP PM or bus code will use this
+ * information to set the interconnect clock to run at the lowest
+ * possible speed that satisfies all current system users.  The PM or
+ * bus code will adjust the estimate based on its model of the bus, so
+ * device driver authors should attempt to specify an accurate
+ * quantity for their device use case, and let the PM or bus code
+ * overestimate the numbers as necessary to handle request/response
+ * latency, other competing users on the system, etc.  On OMAP2/3, if
+ * a driver requests a minimum L4 interconnect speed constraint, the
+ * code will also need to add an minimum L3 interconnect speed
+ * constraint,
+ *
+ * Multiple calls to set_min_bus_tput() will replace the previous rate
+ * value for this device.  To remove the interconnect throughput
+ * restriction for this device, call with r = 0.
+ *
+ * No return value.
+ */
+void omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r);
+
+
+/**
+ * omap_pm_set_max_dev_wakeup_lat - set the maximum device enable latency
+ * @dev: struct device *
+ * @t: maximum device wakeup latency in microseconds
+ *
+ * Request that the maximum amount of time necessary for a device to
+ * become accessible after its clocks are enabled should be no greater
+ * than 't' microseconds.  Specifically, this represents the time from
+ * when a device driver enables device clocks with clk_enable(), to
+ * when the register reads and writes on the device will succeed.
+ * This function should be called before clk_disable() is called,
+ * since the power state transition decision may be made during
+ * clk_disable().
+ *
+ * It is intended that underlying PM code will use this information to
+ * determine what power state to put the powerdomain enclosing this
+ * device into.
+ *
+ * Multiple calls to set_max_dev_wakeup_lat() will replace the
+ * previous wakeup latency values for this device.  To remove the wakeup
+ * latency restriction for this device, call with t = -1.
+ *
+ * No return value.
+ */
+void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t);
+
+
+/**
+ * omap_pm_set_max_sdma_lat - set the maximum system DMA transfer start latency
+ * @dev: struct device *
+ * @t: maximum DMA transfer start latency in microseconds
+ *
+ * Request that the maximum system DMA transfer start latency for this
+ * device 'dev' should be no greater than 't' microseconds.  "DMA
+ * transfer start latency" here is defined as the elapsed time from
+ * when a device (e.g., McBSP) requests that a system DMA transfer
+ * start or continue, to the time at which data starts to flow into
+ * that device from the system DMA controller.
+ *
+ * It is intended that underlying PM code will use this information to
+ * determine what power state to put the CORE powerdomain into.
+ *
+ * Since system DMA transfers may not involve the MPU, this function
+ * will not affect MPU wakeup latency.  Use set_max_cpu_lat() to do
+ * so.  Similarly, this function will not affect device wakeup latency
+ * -- use set_max_dev_wakeup_lat() to affect that.
+ *
+ * Multiple calls to set_max_sdma_lat() will replace the previous t
+ * value for this device.  To remove the maximum DMA latency for this
+ * device, call with t = -1.
+ *
+ * No return value.
+ */
+void omap_pm_set_max_sdma_lat(struct device *dev, long t);
+
+
+/*
+ * DSP Bridge-specific constraints
+ */
+
+/**
+ * omap_pm_dsp_get_opp_table - get OPP->DSP clock frequency table
+ *
+ * Intended for use by DSPBridge.  Returns an array of OPP->DSP clock
+ * frequency entries.  The final item in the array should have .rate =
+ * .opp_id = 0.
+ */
+const struct omap_opp *omap_pm_dsp_get_opp_table(void);
+
+/**
+ * omap_pm_dsp_set_min_opp - receive desired OPP target ID from DSP Bridge
+ * @opp_id: target DSP OPP ID
+ *
+ * Set a minimum OPP ID for the DSP.  This is intended to be called
+ * only from the DSP Bridge MPU-side driver.  Unfortunately, the only
+ * information that code receives from the DSP/BIOS load estimator is the
+ * target OPP ID; hence, this interface.  No return value.
+ */
+void omap_pm_dsp_set_min_opp(u8 opp_id);
+
+/**
+ * omap_pm_dsp_get_opp - report the current DSP OPP ID
+ *
+ * Report the current OPP for the DSP.  Since on OMAP3, the DSP and
+ * MPU share a single voltage domain, the OPP ID returned back may
+ * represent a higher DSP speed than the OPP requested via
+ * omap_pm_dsp_set_min_opp().
+ *
+ * Returns the current VDD1 OPP ID, or 0 upon error.
+ */
+u8 omap_pm_dsp_get_opp(void);
+
+
+/*
+ * CPUFreq-originated constraint
+ *
+ * In the future, this should be handled by custom OPP clocktype
+ * functions.
+ */
+
+/**
+ * omap_pm_cpu_get_freq_table - return a cpufreq_frequency_table array ptr
+ *
+ * Provide a frequency table usable by CPUFreq for the current chip/board.
+ * Returns a pointer to a struct cpufreq_frequency_table array or NULL
+ * upon error.
+ */
+struct cpufreq_frequency_table **omap_pm_cpu_get_freq_table(void);
+
+/**
+ * omap_pm_cpu_set_freq - set the current minimum MPU frequency
+ * @f: MPU frequency in Hz
+ *
+ * Set the current minimum CPU frequency.  The actual CPU frequency
+ * used could end up higher if the DSP requested a higher OPP.
+ * Intended to be called by plat-omap/cpu_omap.c:omap_target().  No
+ * return value.
+ */
+void omap_pm_cpu_set_freq(unsigned long f);
+
+/**
+ * omap_pm_cpu_get_freq - report the current CPU frequency
+ *
+ * Returns the current MPU frequency, or 0 upon error.
+ */
+unsigned long omap_pm_cpu_get_freq(void);
+
+
+/*
+ * Device context loss tracking
+ */
+
+/**
+ * omap_pm_get_dev_context_loss_count - return count of times dev has lost ctx
+ * @dev: struct device *
+ *
+ * This function returns the number of times that the device @dev has
+ * lost its internal context.  This generally occurs on a powerdomain
+ * transition to OFF.  Drivers use this as an optimization to avoid restoring
+ * context if the device hasn't lost it.  To use, drivers should initially
+ * call this in their context save functions and store the result.  Early in
+ * the driver's context restore function, the driver should call this function
+ * again, and compare the result to the stored counter.  If they differ, the
+ * driver must restore device context.   If the number of context losses
+ * exceeds the maximum positive integer, the function will wrap to 0 and
+ * continue counting.  Returns the number of context losses for this device,
+ * or -EINVAL upon error.
+ */
+int omap_pm_get_dev_context_loss_count(struct device *dev);
+
+
+#endif
diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c
new file mode 100644
index 00000000000..e98f0a2a6c2
--- /dev/null
+++ b/arch/arm/plat-omap/omap-pm-noop.c
@@ -0,0 +1,296 @@
+/*
+ * omap-pm-noop.c - OMAP power management interface - dummy version
+ *
+ * This code implements the OMAP power management interface to
+ * drivers, CPUIdle, CPUFreq, and DSP Bridge.  It is strictly for
+ * debug/demonstration use, as it does nothing but printk() whenever a
+ * function is called (when DEBUG is defined, below)
+ *
+ * Copyright (C) 2008-2009 Texas Instruments, Inc.
+ * Copyright (C) 2008-2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * Interface developed by (in alphabetical order):
+ * Karthik Dasu, Tony Lindgren, Rajendra Nayak, Sakari Poussa, Veeramanikandan
+ * Raju, Anand Sawant, Igor Stoppa, Paul Walmsley, Richard Woodruff
+ */
+
+#undef DEBUG
+
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/device.h>
+
+/* Interface documentation is in mach/omap-pm.h */
+#include <mach/omap-pm.h>
+
+#include <mach/powerdomain.h>
+
+struct omap_opp *dsp_opps;
+struct omap_opp *mpu_opps;
+struct omap_opp *l3_opps;
+
+/*
+ * Device-driver-originated constraints (via board-*.c files)
+ */
+
+void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t)
+{
+	if (!dev || t < -1) {
+		WARN_ON(1);
+		return;
+	};
+
+	if (t == -1)
+		pr_debug("OMAP PM: remove max MPU wakeup latency constraint: "
+			 "dev %s\n", dev_name(dev));
+	else
+		pr_debug("OMAP PM: add max MPU wakeup latency constraint: "
+			 "dev %s, t = %ld usec\n", dev_name(dev), t);
+
+	/*
+	 * For current Linux, this needs to map the MPU to a
+	 * powerdomain, then go through the list of current max lat
+	 * constraints on the MPU and find the smallest.  If
+	 * the latency constraint has changed, the code should
+	 * recompute the state to enter for the next powerdomain
+	 * state.
+	 *
+	 * TI CDP code can call constraint_set here.
+	 */
+}
+
+void omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r)
+{
+	if (!dev || (agent_id != OCP_INITIATOR_AGENT &&
+	    agent_id != OCP_TARGET_AGENT)) {
+		WARN_ON(1);
+		return;
+	};
+
+	if (r == 0)
+		pr_debug("OMAP PM: remove min bus tput constraint: "
+			 "dev %s for agent_id %d\n", dev_name(dev), agent_id);
+	else
+		pr_debug("OMAP PM: add min bus tput constraint: "
+			 "dev %s for agent_id %d: rate %ld KiB\n",
+			 dev_name(dev), agent_id, r);
+
+	/*
+	 * This code should model the interconnect and compute the
+	 * required clock frequency, convert that to a VDD2 OPP ID, then
+	 * set the VDD2 OPP appropriately.
+	 *
+	 * TI CDP code can call constraint_set here on the VDD2 OPP.
+	 */
+}
+
+void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t)
+{
+	if (!dev || t < -1) {
+		WARN_ON(1);
+		return;
+	};
+
+	if (t == -1)
+		pr_debug("OMAP PM: remove max device latency constraint: "
+			 "dev %s\n", dev_name(dev));
+	else
+		pr_debug("OMAP PM: add max device latency constraint: "
+			 "dev %s, t = %ld usec\n", dev_name(dev), t);
+
+	/*
+	 * For current Linux, this needs to map the device to a
+	 * powerdomain, then go through the list of current max lat
+	 * constraints on that powerdomain and find the smallest.  If
+	 * the latency constraint has changed, the code should
+	 * recompute the state to enter for the next powerdomain
+	 * state.  Conceivably, this code should also determine
+	 * whether to actually disable the device clocks or not,
+	 * depending on how long it takes to re-enable the clocks.
+	 *
+	 * TI CDP code can call constraint_set here.
+	 */
+}
+
+void omap_pm_set_max_sdma_lat(struct device *dev, long t)
+{
+	if (!dev || t < -1) {
+		WARN_ON(1);
+		return;
+	};
+
+	if (t == -1)
+		pr_debug("OMAP PM: remove max DMA latency constraint: "
+			 "dev %s\n", dev_name(dev));
+	else
+		pr_debug("OMAP PM: add max DMA latency constraint: "
+			 "dev %s, t = %ld usec\n", dev_name(dev), t);
+
+	/*
+	 * For current Linux PM QOS params, this code should scan the
+	 * list of maximum CPU and DMA latencies and select the
+	 * smallest, then set cpu_dma_latency pm_qos_param
+	 * accordingly.
+	 *
+	 * For future Linux PM QOS params, with separate CPU and DMA
+	 * latency params, this code should just set the dma_latency param.
+	 *
+	 * TI CDP code can call constraint_set here.
+	 */
+
+}
+
+
+/*
+ * DSP Bridge-specific constraints
+ */
+
+const struct omap_opp *omap_pm_dsp_get_opp_table(void)
+{
+	pr_debug("OMAP PM: DSP request for OPP table\n");
+
+	/*
+	 * Return DSP frequency table here:  The final item in the
+	 * array should have .rate = .opp_id = 0.
+	 */
+
+	return NULL;
+}
+
+void omap_pm_dsp_set_min_opp(u8 opp_id)
+{
+	if (opp_id == 0) {
+		WARN_ON(1);
+		return;
+	}
+
+	pr_debug("OMAP PM: DSP requests minimum VDD1 OPP to be %d\n", opp_id);
+
+	/*
+	 *
+	 * For l-o dev tree, our VDD1 clk is keyed on OPP ID, so we
+	 * can just test to see which is higher, the CPU's desired OPP
+	 * ID or the DSP's desired OPP ID, and use whichever is
+	 * highest.
+	 *
+	 * In CDP12.14+, the VDD1 OPP custom clock that controls the DSP
+	 * rate is keyed on MPU speed, not the OPP ID.  So we need to
+	 * map the OPP ID to the MPU speed for use with clk_set_rate()
+	 * if it is higher than the current OPP clock rate.
+	 *
+	 */
+}
+
+
+u8 omap_pm_dsp_get_opp(void)
+{
+	pr_debug("OMAP PM: DSP requests current DSP OPP ID\n");
+
+	/*
+	 * For l-o dev tree, call clk_get_rate() on VDD1 OPP clock
+	 *
+	 * CDP12.14+:
+	 * Call clk_get_rate() on the OPP custom clock, map that to an
+	 * OPP ID using the tables defined in board-*.c/chip-*.c files.
+	 */
+
+	return 0;
+}
+
+/*
+ * CPUFreq-originated constraint
+ *
+ * In the future, this should be handled by custom OPP clocktype
+ * functions.
+ */
+
+struct cpufreq_frequency_table **omap_pm_cpu_get_freq_table(void)
+{
+	pr_debug("OMAP PM: CPUFreq request for frequency table\n");
+
+	/*
+	 * Return CPUFreq frequency table here: loop over
+	 * all VDD1 clkrates, pull out the mpu_ck frequencies, build
+	 * table
+	 */
+
+	return NULL;
+}
+
+void omap_pm_cpu_set_freq(unsigned long f)
+{
+	if (f == 0) {
+		WARN_ON(1);
+		return;
+	}
+
+	pr_debug("OMAP PM: CPUFreq requests CPU frequency to be set to %lu\n",
+		 f);
+
+	/*
+	 * For l-o dev tree, determine whether MPU freq or DSP OPP id
+	 * freq is higher.  Find the OPP ID corresponding to the
+	 * higher frequency.  Call clk_round_rate() and clk_set_rate()
+	 * on the OPP custom clock.
+	 *
+	 * CDP should just be able to set the VDD1 OPP clock rate here.
+	 */
+}
+
+unsigned long omap_pm_cpu_get_freq(void)
+{
+	pr_debug("OMAP PM: CPUFreq requests current CPU frequency\n");
+
+	/*
+	 * Call clk_get_rate() on the mpu_ck.
+	 */
+
+	return 0;
+}
+
+/*
+ * Device context loss tracking
+ */
+
+int omap_pm_get_dev_context_loss_count(struct device *dev)
+{
+	if (!dev) {
+		WARN_ON(1);
+		return -EINVAL;
+	};
+
+	pr_debug("OMAP PM: returning context loss count for dev %s\n",
+		 dev_name(dev));
+
+	/*
+	 * Map the device to the powerdomain.  Return the powerdomain
+	 * off counter.
+	 */
+
+	return 0;
+}
+
+
+/* Should be called before clk framework init */
+int __init omap_pm_if_early_init(struct omap_opp *mpu_opp_table,
+				 struct omap_opp *dsp_opp_table,
+				 struct omap_opp *l3_opp_table)
+{
+	mpu_opps = mpu_opp_table;
+	dsp_opps = dsp_opp_table;
+	l3_opps = l3_opp_table;
+	return 0;
+}
+
+/* Must be called after clock framework is initialized */
+int __init omap_pm_if_init(void)
+{
+	return 0;
+}
+
+void omap_pm_if_exit(void)
+{
+	/* Deallocate CPUFreq frequency table here */
+}
+
-- 
cgit v1.2.3


From 71348bcaac6f4c372525d4d62e88a82a7330435b Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Thu, 3 Sep 2009 20:14:02 +0300
Subject: OMAP2/3/4 PRCM: add module IDLEST wait code

After a hardware module's clocks are enabled, Linux must wait for it
to indicate readiness via its IDLEST bit before attempting to access
the device, otherwise register accesses to the device may trigger an
abort.  This has traditionally been implemented in the clock
framework, but this is the wrong place for it: the clock framework
doesn't know which module clocks must be enabled for a module to leave
idle; and if a module is not in smart-idle mode, it may never leave
idle at all.  This type of information is best stored in a
per-hardware module data structure (coming in a following patch),
rather than a per-clock data structure.  The new code will use these new
functions to handle waiting for modules to enable.

Once hardware module data is filled in for all of the on-chip devices,
the clock framework code to handle IDLEST waiting can be removed.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/Makefile |  5 ++++
 arch/arm/mach-omap2/cm.c     | 70 ++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-omap2/cm.h     |  4 +++
 arch/arm/mach-omap2/cm4xxx.c | 68 ++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 147 insertions(+)
 create mode 100644 arch/arm/mach-omap2/cm.c
 create mode 100644 arch/arm/mach-omap2/cm4xxx.c

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 8850a247bec..59d730fa77e 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -35,6 +35,11 @@ obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o
 obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
 endif
 
+# PRCM
+obj-$(CONFIG_ARCH_OMAP2)		+= cm.o
+obj-$(CONFIG_ARCH_OMAP3)		+= cm.o
+obj-$(CONFIG_ARCH_OMAP4)		+= cm4xxx.o
+
 # Clock framework
 obj-$(CONFIG_ARCH_OMAP2)		+= clock24xx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= clock34xx.o
diff --git a/arch/arm/mach-omap2/cm.c b/arch/arm/mach-omap2/cm.c
new file mode 100644
index 00000000000..8eb2dab8c7d
--- /dev/null
+++ b/arch/arm/mach-omap2/cm.c
@@ -0,0 +1,70 @@
+/*
+ * OMAP2/3 CM module functions
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/atomic.h>
+
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+#include "cm-regbits-34xx.h"
+
+/* MAX_MODULE_READY_TIME: max milliseconds for module to leave idle */
+#define MAX_MODULE_READY_TIME		20000
+
+static const u8 cm_idlest_offs[] = {
+	CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3
+};
+
+/**
+ * omap2_cm_wait_idlest_ready - wait for a module to leave idle or standby
+ * @prcm_mod: PRCM module offset
+ * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
+ * @idlest_shift: shift of the bit in the CM_IDLEST* register to check
+ *
+ * XXX document
+ */
+int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
+{
+	int ena = 0, i = 0;
+	u8 cm_idlest_reg;
+	u32 mask;
+
+	if (!idlest_id || (idlest_id > ARRAY_SIZE(cm_idlest_offs)))
+		return -EINVAL;
+
+	cm_idlest_reg = cm_idlest_offs[idlest_id - 1];
+
+	if (cpu_is_omap24xx())
+		ena = idlest_shift;
+	else if (cpu_is_omap34xx())
+		ena = 0;
+	else
+		BUG();
+
+	mask = 1 << idlest_shift;
+
+	/* XXX should be OMAP2 CM */
+	while (((cm_read_mod_reg(prcm_mod, cm_idlest_reg) & mask) != ena) &&
+	       (i++ < MAX_MODULE_READY_TIME))
+		udelay(1);
+
+	return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
+}
+
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index 18d9a121aa7..cfd0b726ba4 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -98,6 +98,10 @@ extern u32 cm_read_mod_reg(s16 module, u16 idx);
 extern void cm_write_mod_reg(u32 val, s16 module, u16 idx);
 extern u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
 
+extern int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
+				      u8 idlest_shift);
+extern int omap4_cm_wait_module_ready(u32 prcm_mod, u8 prcm_dev_offs);
+
 static inline u32 cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
 {
 	return cm_rmw_mod_reg_bits(bits, bits, module, idx);
diff --git a/arch/arm/mach-omap2/cm4xxx.c b/arch/arm/mach-omap2/cm4xxx.c
new file mode 100644
index 00000000000..e4ebd6d5313
--- /dev/null
+++ b/arch/arm/mach-omap2/cm4xxx.c
@@ -0,0 +1,68 @@
+/*
+ * OMAP4 CM module functions
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/atomic.h>
+
+#include "cm.h"
+#include "cm-regbits-4xxx.h"
+
+/* XXX move this to cm.h */
+/* MAX_MODULE_READY_TIME: max milliseconds for module to leave idle */
+#define MAX_MODULE_READY_TIME			20000
+
+/*
+ * OMAP4_PRCM_CM_CLKCTRL_IDLEST_MASK: isolates the IDLEST field in the
+ * CM_CLKCTRL register.
+ */
+#define OMAP4_PRCM_CM_CLKCTRL_IDLEST_MASK	(0x2 << 16)
+
+/*
+ * OMAP4 prcm_mod u32 fields contain packed data: the CM ID in bit 16 and
+ * the PRCM module offset address (from the CM module base) in bits 15-0.
+ */
+#define OMAP4_PRCM_MOD_CM_ID_SHIFT		16
+#define OMAP4_PRCM_MOD_OFFS_MASK		0xffff
+
+/**
+ * omap4_cm_wait_idlest_ready - wait for a module to leave idle or standby
+ * @prcm_mod: PRCM module offset (XXX example)
+ * @prcm_dev_offs: PRCM device offset (e.g. MCASP XXX example)
+ *
+ * XXX document
+ */
+int omap4_cm_wait_idlest_ready(u32 prcm_mod, u8 prcm_dev_offs)
+{
+	int i = 0;
+	u8 cm_id;
+	u16 prcm_mod_offs;
+	u32 mask = OMAP4_PRCM_CM_CLKCTRL_IDLEST_MASK;
+
+	cm_id = prcm_mod >> OMAP4_PRCM_MOD_CM_ID_SHIFT;
+	prcm_mod_offs = prcm_mod & OMAP4_PRCM_MOD_OFFS_MASK;
+
+	while (((omap4_cm_read_mod_reg(cm_id, prcm_mod_offs, prcm_dev_offs,
+				       OMAP4_CM_CLKCTRL_DREG) & mask) != 0) &&
+	       (i++ < MAX_MODULE_READY_TIME))
+		udelay(1);
+
+	return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
+}
+
-- 
cgit v1.2.3


From b3c6df3ab2b17cd7ddf927d39a64f235b25ac8d4 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Thu, 3 Sep 2009 20:14:02 +0300
Subject: OMAP2/3 board-*.c files: read bootloader configuration earlier

Most board-*.c files read configuration data from the bootloader in
their .init_machine() function.  This needs to happen earlier, at some
point before omap2_init_common_hw() is called.  This is because a
future patch will use the bootloader serial console port information
to enable the UART clocks earlier, immediately after omap2_clk_init().
This is in turn necessary since otherwise clock tree usecounts on
clocks like dpll4_m2x2_ck will be bogus, which can cause the
currently-active console UART clock to be disabled during boot.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/board-2430sdp.c      | 13 ++++++-------
 arch/arm/mach-omap2/board-3430sdp.c      | 18 +++++++++---------
 arch/arm/mach-omap2/board-apollon.c      | 20 ++++++++++----------
 arch/arm/mach-omap2/board-generic.c      | 10 +++++-----
 arch/arm/mach-omap2/board-h4.c           | 20 ++++++++++----------
 arch/arm/mach-omap2/board-ldp.c          | 20 ++++++++++----------
 arch/arm/mach-omap2/board-omap3beagle.c  | 26 +++++++++++++-------------
 arch/arm/mach-omap2/board-omap3evm.c     | 12 ++++++------
 arch/arm/mach-omap2/board-omap3pandora.c | 20 ++++++++++----------
 arch/arm/mach-omap2/board-overo.c        | 20 ++++++++++----------
 arch/arm/mach-omap2/board-rx51.c         |  4 ++--
 arch/arm/mach-omap2/board-zoom2.c        | 18 +++++++++---------
 arch/arm/mach-omap2/io.c                 |  2 ++
 arch/arm/mach-omap2/serial.c             | 14 +++++++++++++-
 arch/arm/plat-omap/include/mach/serial.h |  3 +++
 15 files changed, 118 insertions(+), 102 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 7f5a74d5924..42217b32f83 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -139,18 +139,19 @@ static inline void board_smc91x_init(void)
 
 #endif
 
+static struct omap_board_config_kernel sdp2430_config[] = {
+	{OMAP_TAG_LCD, &sdp2430_lcd_config},
+};
+
 static void __init omap_2430sdp_init_irq(void)
 {
+	omap_board_config = sdp2430_config;
+	omap_board_config_size = ARRAY_SIZE(sdp2430_config);
 	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
 	omap_gpio_init();
 }
 
-static struct omap_board_config_kernel sdp2430_config[] = {
-	{OMAP_TAG_LCD, &sdp2430_lcd_config},
-};
-
-
 static struct twl4030_gpio_platform_data sdp2430_gpio_data = {
 	.gpio_base	= OMAP_MAX_GPIO_LINES,
 	.irq_base	= TWL4030_GPIO_IRQ_BASE,
@@ -200,8 +201,6 @@ static void __init omap_2430sdp_init(void)
 	omap2430_i2c_init();
 
 	platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
-	omap_board_config = sdp2430_config;
-	omap_board_config_size = ARRAY_SIZE(sdp2430_config);
 	omap_serial_init();
 	twl4030_mmc_init(mmc);
 	usb_musb_init();
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 7e9b76cc767..4500e7f674d 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -167,13 +167,6 @@ static struct platform_device *sdp3430_devices[] __initdata = {
 	&sdp3430_lcd_device,
 };
 
-static void __init omap_3430sdp_init_irq(void)
-{
-	omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL);
-	omap_init_irq();
-	omap_gpio_init();
-}
-
 static struct omap_lcd_config sdp3430_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
@@ -182,6 +175,15 @@ static struct omap_board_config_kernel sdp3430_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&sdp3430_lcd_config },
 };
 
+static void __init omap_3430sdp_init_irq(void)
+{
+	omap_board_config = sdp3430_config;
+	omap_board_config_size = ARRAY_SIZE(sdp3430_config);
+	omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
 static int sdp3430_batt_table[] = {
 /* 0 C*/
 30800, 29500, 28300, 27100,
@@ -477,8 +479,6 @@ static void __init omap_3430sdp_init(void)
 {
 	omap3430_i2c_init();
 	platform_add_devices(sdp3430_devices, ARRAY_SIZE(sdp3430_devices));
-	omap_board_config = sdp3430_config;
-	omap_board_config_size = ARRAY_SIZE(sdp3430_config);
 	if (omap_rev() > OMAP3430_REV_ES1_0)
 		ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV2;
 	else
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 615f21d1eb2..7a2b54c7291 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -248,14 +248,6 @@ out:
 	clk_put(gpmc_fck);
 }
 
-static void __init omap_apollon_init_irq(void)
-{
-	omap2_init_common_hw(NULL, NULL);
-	omap_init_irq();
-	omap_gpio_init();
-	apollon_init_smc91x();
-}
-
 static struct omap_usb_config apollon_usb_config __initdata = {
 	.register_dev	= 1,
 	.hmc_mode	= 0x14,	/* 0:dev 1:host1 2:disable */
@@ -271,6 +263,16 @@ static struct omap_board_config_kernel apollon_config[] = {
 	{ OMAP_TAG_LCD,		&apollon_lcd_config },
 };
 
+static void __init omap_apollon_init_irq(void)
+{
+	omap_board_config = apollon_config;
+	omap_board_config_size = ARRAY_SIZE(apollon_config);
+	omap2_init_common_hw(NULL, NULL);
+	omap_init_irq();
+	omap_gpio_init();
+	apollon_init_smc91x();
+}
+
 static void __init apollon_led_init(void)
 {
 	/* LED0 - AA10 */
@@ -319,8 +321,6 @@ static void __init omap_apollon_init(void)
 	 * if not needed.
 	 */
 	platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices));
-	omap_board_config = apollon_config;
-	omap_board_config_size = ARRAY_SIZE(apollon_config);
 	omap_serial_init();
 }
 
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 3e401c5b6e4..2e09a1c444c 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -31,19 +31,19 @@
 #include <mach/board.h>
 #include <mach/common.h>
 
+static struct omap_board_config_kernel generic_config[] = {
+};
+
 static void __init omap_generic_init_irq(void)
 {
+	omap_board_config = generic_config;
+	omap_board_config_size = ARRAY_SIZE(generic_config);
 	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
 }
 
-static struct omap_board_config_kernel generic_config[] = {
-};
-
 static void __init omap_generic_init(void)
 {
-	omap_board_config = generic_config;
-	omap_board_config_size = ARRAY_SIZE(generic_config);
 	omap_serial_init();
 }
 
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index b6501d241c1..eaa02d012c5 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -268,14 +268,6 @@ static void __init h4_init_flash(void)
 	h4_flash_resource.end	= base + SZ_64M - 1;
 }
 
-static void __init omap_h4_init_irq(void)
-{
-	omap2_init_common_hw(NULL, NULL);
-	omap_init_irq();
-	omap_gpio_init();
-	h4_init_flash();
-}
-
 static struct omap_lcd_config h4_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
@@ -317,6 +309,16 @@ static struct omap_board_config_kernel h4_config[] = {
 	{ OMAP_TAG_LCD,		&h4_lcd_config },
 };
 
+static void __init omap_h4_init_irq(void)
+{
+	omap_board_config = h4_config;
+	omap_board_config_size = ARRAY_SIZE(h4_config);
+	omap2_init_common_hw(NULL, NULL);
+	omap_init_irq();
+	omap_gpio_init();
+	h4_init_flash();
+}
+
 static struct at24_platform_data m24c01 = {
 	.byte_len	= SZ_1K / 8,
 	.page_size	= 16,
@@ -361,8 +363,6 @@ static void __init omap_h4_init(void)
 			ARRAY_SIZE(h4_i2c_board_info));
 
 	platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
-	omap_board_config = h4_config;
-	omap_board_config_size = ARRAY_SIZE(h4_config);
 	omap_usb_init(&h4_usb_config);
 	omap_serial_init();
 }
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 2dd6806a1e8..ec6854cbdd9 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -268,14 +268,6 @@ static inline void __init ldp_init_smsc911x(void)
 	gpio_direction_input(eth_gpio);
 }
 
-static void __init omap_ldp_init_irq(void)
-{
-	omap2_init_common_hw(NULL, NULL);
-	omap_init_irq();
-	omap_gpio_init();
-	ldp_init_smsc911x();
-}
-
 static struct platform_device ldp_lcd_device = {
 	.name		= "ldp_lcd",
 	.id		= -1,
@@ -289,6 +281,16 @@ static struct omap_board_config_kernel ldp_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&ldp_lcd_config },
 };
 
+static void __init omap_ldp_init_irq(void)
+{
+	omap_board_config = ldp_config;
+	omap_board_config_size = ARRAY_SIZE(ldp_config);
+	omap2_init_common_hw(NULL, NULL);
+	omap_init_irq();
+	omap_gpio_init();
+	ldp_init_smsc911x();
+}
+
 static struct twl4030_usb_data ldp_usb_data = {
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
@@ -372,8 +374,6 @@ static void __init omap_ldp_init(void)
 {
 	omap_i2c_init();
 	platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
-	omap_board_config = ldp_config;
-	omap_board_config_size = ARRAY_SIZE(ldp_config);
 	ts_gpio = 54;
 	ldp_spi_board_info[0].irq = gpio_to_irq(ts_gpio);
 	spi_register_board_info(ldp_spi_board_info,
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index d79ea8da627..500c9956876 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -281,17 +281,6 @@ static int __init omap3_beagle_i2c_init(void)
 	return 0;
 }
 
-static void __init omap3_beagle_init_irq(void)
-{
-	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
-			     mt46h32m32lf6_sdrc_params);
-	omap_init_irq();
-#ifdef CONFIG_OMAP_32K_TIMER
-	omap2_gp_clockevent_set_gptimer(12);
-#endif
-	omap_gpio_init();
-}
-
 static struct gpio_led gpio_leds[] = {
 	{
 		.name			= "beagleboard::usr0",
@@ -349,6 +338,19 @@ static struct omap_board_config_kernel omap3_beagle_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&omap3_beagle_lcd_config },
 };
 
+static void __init omap3_beagle_init_irq(void)
+{
+	omap_board_config = omap3_beagle_config;
+	omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+			     mt46h32m32lf6_sdrc_params);
+	omap_init_irq();
+#ifdef CONFIG_OMAP_32K_TIMER
+	omap2_gp_clockevent_set_gptimer(12);
+#endif
+	omap_gpio_init();
+}
+
 static struct platform_device *omap3_beagle_devices[] __initdata = {
 	&omap3_beagle_lcd_device,
 	&leds_gpio,
@@ -398,8 +400,6 @@ static void __init omap3_beagle_init(void)
 	omap3_beagle_i2c_init();
 	platform_add_devices(omap3_beagle_devices,
 			ARRAY_SIZE(omap3_beagle_devices));
-	omap_board_config = omap3_beagle_config;
-	omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
 	omap_serial_init();
 
 	omap_cfg_reg(J25_34XX_GPIO170);
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 3e0435371ce..d50b9be9058 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -274,18 +274,20 @@ struct spi_board_info omap3evm_spi_board_info[] = {
 	},
 };
 
+static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
+	{ OMAP_TAG_LCD,		&omap3_evm_lcd_config },
+};
+
 static void __init omap3_evm_init_irq(void)
 {
+	omap_board_config = omap3_evm_config;
+	omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
 	omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL);
 	omap_init_irq();
 	omap_gpio_init();
 	omap3evm_init_smc911x();
 }
 
-static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
-	{ OMAP_TAG_LCD,		&omap3_evm_lcd_config },
-};
-
 static struct platform_device *omap3_evm_devices[] __initdata = {
 	&omap3_evm_lcd_device,
 	&omap3evm_smc911x_device,
@@ -296,8 +298,6 @@ static void __init omap3_evm_init(void)
 	omap3_evm_i2c_init();
 
 	platform_add_devices(omap3_evm_devices, ARRAY_SIZE(omap3_evm_devices));
-	omap_board_config = omap3_evm_config;
-	omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
 
 	spi_register_board_info(omap3evm_spi_board_info,
 				ARRAY_SIZE(omap3evm_spi_board_info));
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 8236708c362..b43f6e36b6d 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -305,14 +305,6 @@ static int __init omap3pandora_i2c_init(void)
 	return 0;
 }
 
-static void __init omap3pandora_init_irq(void)
-{
-	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
-			     mt46h32m32lf6_sdrc_params);
-	omap_init_irq();
-	omap_gpio_init();
-}
-
 static void __init omap3pandora_ads7846_init(void)
 {
 	int gpio = OMAP3_PANDORA_TS_GPIO;
@@ -375,6 +367,16 @@ static struct omap_board_config_kernel omap3pandora_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&omap3pandora_lcd_config },
 };
 
+static void __init omap3pandora_init_irq(void)
+{
+	omap_board_config = omap3pandora_config;
+	omap_board_config_size = ARRAY_SIZE(omap3pandora_config);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+			     mt46h32m32lf6_sdrc_params);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
 static struct platform_device *omap3pandora_devices[] __initdata = {
 	&omap3pandora_lcd_device,
 	&pandora_leds_gpio,
@@ -386,8 +388,6 @@ static void __init omap3pandora_init(void)
 	omap3pandora_i2c_init();
 	platform_add_devices(omap3pandora_devices,
 			ARRAY_SIZE(omap3pandora_devices));
-	omap_board_config = omap3pandora_config;
-	omap_board_config_size = ARRAY_SIZE(omap3pandora_config);
 	omap_serial_init();
 	spi_register_board_info(omap3pandora_spi_board_info,
 			ARRAY_SIZE(omap3pandora_spi_board_info));
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index eb78e6eab4f..9917d2fddc2 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -357,14 +357,6 @@ static int __init overo_i2c_init(void)
 	return 0;
 }
 
-static void __init overo_init_irq(void)
-{
-	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
-			     mt46h32m32lf6_sdrc_params);
-	omap_init_irq();
-	omap_gpio_init();
-}
-
 static struct platform_device overo_lcd_device = {
 	.name		= "overo_lcd",
 	.id		= -1,
@@ -378,6 +370,16 @@ static struct omap_board_config_kernel overo_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&overo_lcd_config },
 };
 
+static void __init overo_init_irq(void)
+{
+	omap_board_config = overo_config;
+	omap_board_config_size = ARRAY_SIZE(overo_config);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+			     mt46h32m32lf6_sdrc_params);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
 static struct platform_device *overo_devices[] __initdata = {
 	&overo_lcd_device,
 };
@@ -386,8 +388,6 @@ static void __init overo_init(void)
 {
 	overo_i2c_init();
 	platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices));
-	omap_board_config = overo_config;
-	omap_board_config_size = ARRAY_SIZE(overo_config);
 	omap_serial_init();
 	overo_flash_init();
 	usb_musb_init();
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index c0d13401425..f9196c3b1a7 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -56,6 +56,8 @@ static struct omap_board_config_kernel rx51_config[] = {
 
 static void __init rx51_init_irq(void)
 {
+	omap_board_config = rx51_config;
+	omap_board_config_size = ARRAY_SIZE(rx51_config);
 	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
 	omap_gpio_init();
@@ -65,8 +67,6 @@ extern void __init rx51_peripherals_init(void);
 
 static void __init rx51_init(void)
 {
-	omap_board_config = rx51_config;
-	omap_board_config_size = ARRAY_SIZE(rx51_config);
 	omap_serial_init();
 	usb_musb_init();
 	rx51_peripherals_init();
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index dabba2720a9..324009edbd5 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -90,13 +90,6 @@ static struct twl4030_keypad_data zoom2_kp_twl4030_data = {
 	.rep		= 1,
 };
 
-static void __init omap_zoom2_init_irq(void)
-{
-	omap2_init_common_hw(NULL, NULL);
-	omap_init_irq();
-	omap_gpio_init();
-}
-
 static struct omap_board_config_kernel zoom2_config[] __initdata = {
 };
 
@@ -212,6 +205,15 @@ static struct twl4030_usb_data zoom2_usb_data = {
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
 
+static void __init omap_zoom2_init_irq(void)
+{
+	omap_board_config = zoom2_config;
+	omap_board_config_size = ARRAY_SIZE(zoom2_config);
+	omap2_init_common_hw(NULL, NULL);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
 static struct twl4030_gpio_platform_data zoom2_gpio_data = {
 	.gpio_base	= OMAP_MAX_GPIO_LINES,
 	.irq_base	= TWL4030_GPIO_IRQ_BASE,
@@ -262,8 +264,6 @@ extern int __init omap_zoom2_debugboard_init(void);
 static void __init omap_zoom2_init(void)
 {
 	omap_i2c_init();
-	omap_board_config = zoom2_config;
-	omap_board_config_size = ARRAY_SIZE(zoom2_config);
 	omap_serial_init();
 	omap_zoom2_debugboard_init();
 	usb_musb_init();
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 4bfe873e1b8..470b1d10c4e 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -32,6 +32,7 @@
 #include <mach/sram.h>
 #include <mach/sdrc.h>
 #include <mach/gpmc.h>
+#include <mach/serial.h>
 
 #ifndef CONFIG_ARCH_OMAP4	/* FIXME: Remove this once clkdev is ready */
 #include "clock.h"
@@ -287,6 +288,7 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 	pwrdm_init(powerdomains_omap);
 	clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
 	omap2_clk_init();
+	omap_serial_early_init();
 	omap_pm_if_init();
 	omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
 	_omap2_init_reprogram_sdrc();
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index dd3c735b558..ca28424f2fb 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -552,7 +552,7 @@ static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = {
 	},
 };
 
-void __init omap_serial_init(void)
+void __init omap_serial_early_init(void)
 {
 	int i;
 	char name[16];
@@ -595,6 +595,18 @@ void __init omap_serial_init(void)
 			p->irq += 32;
 
 		omap_uart_enable_clocks(uart);
+	}
+}
+
+void __init omap_serial_init(void)
+{
+	int i;
+
+	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
+		struct omap_uart_state *uart = &omap_uart[i];
+		struct platform_device *pdev = &uart->pdev;
+		struct device *dev = &pdev->dev;
+
 		omap_uart_reset(uart);
 		omap_uart_idle_init(uart);
 
diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h
index def0529c75e..e249186d26e 100644
--- a/arch/arm/plat-omap/include/mach/serial.h
+++ b/arch/arm/plat-omap/include/mach/serial.h
@@ -13,6 +13,8 @@
 #ifndef __ASM_ARCH_SERIAL_H
 #define __ASM_ARCH_SERIAL_H
 
+#include <linux/init.h>
+
 #if defined(CONFIG_ARCH_OMAP1)
 /* OMAP1 serial ports */
 #define OMAP_UART1_BASE		0xfffb0000
@@ -53,6 +55,7 @@
 			})
 
 #ifndef __ASSEMBLER__
+extern void __init omap_serial_early_init(void);
 extern void omap_serial_init(void);
 extern int omap_uart_can_sleep(void);
 extern void omap_uart_check_wakeup(void);
-- 
cgit v1.2.3


From 63c852384125ca0eff0e695f92cbbd439bed4aa3 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Thu, 3 Sep 2009 20:14:03 +0300
Subject: OMAP2/3/4: create omap_hwmod layer

OMAP SoCs can be considered a collection of hardware IP blocks
connected by various interconnects.  The bus topology and device
integration data is somewhat more complex than platform_device can
encode.  This patch creates code and structures to manage information
about OMAP on-chip devices ("hardware modules") and their integration
to the rest of the chip.  Hardware module data is intended to be
generated dynamically from the TI hardware database for the OMAP4
chips and beyond, easing Linux support for new chip variants.

This code currently:

- resets and configures all hardware modules upon startup, reducing bootloader
  dependencies;

- provides hooks for Linux driver model code to enable, idle, and shutdown
  hardware modules (forthcoming patch);

- waits for hardware modules to leave idle once their clocks
  are enabled and OCP_SYSCONFIG bits are set appropriately.

- provides a means to pass arbitrary IP block configuration data (e.g.,
  FIFO size) to the device driver (via the dev_attr void pointer)

In the future this code is intended to:

- estimate interconnect bandwidth and latency characteristics to
  ensure constraints are satisfied during DVFS

- provide *GRPSEL bit data to the powerdomain code

- handle pin/ball muxing for devices

- generate IO mapping information dynamically

- supply device firewall configuration data

- provide hardware module data to other on-chip coprocessor software

- allow the removal of the "disable unused clocks" code in the OMAP2/3
  clock code

This patch represents a collaborative effort involving many people from TI,
Nokia, and the Linux-OMAP community.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Vikram Pandita <vikram.pandita@ti.com>
Cc: Sakari Poussa <sakari.poussa@nokia.com>
Cc: Anand Sawant <sawant@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Eric Thomas <ethomas@ti.com>
Cc: Richard Woodruff <r-woodruff2@ti.com>
---
 arch/arm/mach-omap2/Makefile                 |    2 +-
 arch/arm/mach-omap2/omap_hwmod.c             | 1555 ++++++++++++++++++++++++++
 arch/arm/plat-omap/include/mach/omap_hwmod.h |  447 ++++++++
 3 files changed, 2003 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-omap2/omap_hwmod.c
 create mode 100644 arch/arm/plat-omap/include/mach/omap_hwmod.h

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 59d730fa77e..8cb16777661 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -5,7 +5,7 @@
 # Common support
 obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o
 
-omap-2-3-common				= irq.o sdrc.o
+omap-2-3-common				= irq.o sdrc.o omap_hwmod.o
 prcm-common				= prcm.o powerdomain.o
 clock-common				= clock.o clockdomain.o
 
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
new file mode 100644
index 00000000000..3b10ad6c47d
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -0,0 +1,1555 @@
+/*
+ * omap_hwmod implementation for OMAP2/3/4
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ * With fixes and testing from Kevin Hilman
+ *
+ * Created in collaboration with (alphabetical order): Benoit Cousson,
+ * Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari
+ * Poussa, Anand Sawant, Santosh Shilimkar, Richard Woodruff
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This code manages "OMAP modules" (on-chip devices) and their
+ * integration with Linux device driver and bus code.
+ *
+ * References:
+ * - OMAP2420 Multimedia Processor Silicon Revision 2.1.1, 2.2 (SWPU064)
+ * - OMAP2430 Multimedia Device POP Silicon Revision 2.1 (SWPU090)
+ * - OMAP34xx Multimedia Device Silicon Revision 3.1 (SWPU108)
+ * - OMAP4430 Multimedia Device Silicon Revision 1.0 (SWPU140)
+ * - Open Core Protocol Specification 2.2
+ *
+ * To do:
+ * - pin mux handling
+ * - handle IO mapping
+ * - bus throughput & module latency measurement code
+ *
+ * XXX add tests at the beginning of each function to ensure the hwmod is
+ * in the appropriate state
+ * XXX error return values should be checked to ensure that they are
+ * appropriate
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/bootmem.h>
+
+#include <mach/cpu.h>
+#include <mach/clockdomain.h>
+#include <mach/powerdomain.h>
+#include <mach/clock.h>
+#include <mach/omap_hwmod.h>
+
+#include "cm.h"
+
+/* Maximum microseconds to wait for OMAP module to reset */
+#define MAX_MODULE_RESET_WAIT		10000
+
+/* Name of the OMAP hwmod for the MPU */
+#define MPU_INITIATOR_NAME		"mpu_hwmod"
+
+/* omap_hwmod_list contains all registered struct omap_hwmods */
+static LIST_HEAD(omap_hwmod_list);
+
+static DEFINE_MUTEX(omap_hwmod_mutex);
+
+/* mpu_oh: used to add/remove MPU initiator from sleepdep list */
+static struct omap_hwmod *mpu_oh;
+
+/* inited: 0 if omap_hwmod_init() has not yet been called; 1 otherwise */
+static u8 inited;
+
+
+/* Private functions */
+
+/**
+ * _update_sysc_cache - return the module OCP_SYSCONFIG register, keep copy
+ * @oh: struct omap_hwmod *
+ *
+ * Load the current value of the hwmod OCP_SYSCONFIG register into the
+ * struct omap_hwmod for later use.  Returns -EINVAL if the hwmod has no
+ * OCP_SYSCONFIG register or 0 upon success.
+ */
+static int _update_sysc_cache(struct omap_hwmod *oh)
+{
+	if (!oh->sysconfig) {
+		WARN(!oh->sysconfig, "omap_hwmod: %s: cannot read "
+		     "OCP_SYSCONFIG: not defined on hwmod\n", oh->name);
+		return -EINVAL;
+	}
+
+	/* XXX ensure module interface clock is up */
+
+	oh->_sysc_cache = omap_hwmod_readl(oh, oh->sysconfig->sysc_offs);
+
+	oh->_int_flags |= _HWMOD_SYSCONFIG_LOADED;
+
+	return 0;
+}
+
+/**
+ * _write_sysconfig - write a value to the module's OCP_SYSCONFIG register
+ * @v: OCP_SYSCONFIG value to write
+ * @oh: struct omap_hwmod *
+ *
+ * Write @v into the module OCP_SYSCONFIG register, if it has one.  No
+ * return value.
+ */
+static void _write_sysconfig(u32 v, struct omap_hwmod *oh)
+{
+	if (!oh->sysconfig) {
+		WARN(!oh->sysconfig, "omap_hwmod: %s: cannot write "
+		     "OCP_SYSCONFIG: not defined on hwmod\n", oh->name);
+		return;
+	}
+
+	/* XXX ensure module interface clock is up */
+
+	if (oh->_sysc_cache != v) {
+		oh->_sysc_cache = v;
+		omap_hwmod_writel(v, oh, oh->sysconfig->sysc_offs);
+	}
+}
+
+/**
+ * _set_master_standbymode: set the OCP_SYSCONFIG MIDLEMODE field in @v
+ * @oh: struct omap_hwmod *
+ * @standbymode: MIDLEMODE field bits
+ * @v: pointer to register contents to modify
+ *
+ * Update the master standby mode bits in @v to be @standbymode for
+ * the @oh hwmod.  Does not write to the hardware.  Returns -EINVAL
+ * upon error or 0 upon success.
+ */
+static int _set_master_standbymode(struct omap_hwmod *oh, u8 standbymode,
+				   u32 *v)
+{
+	if (!oh->sysconfig ||
+	    !(oh->sysconfig->sysc_flags & SYSC_HAS_MIDLEMODE))
+		return -EINVAL;
+
+	*v &= ~SYSC_MIDLEMODE_MASK;
+	*v |= __ffs(standbymode) << SYSC_MIDLEMODE_SHIFT;
+
+	return 0;
+}
+
+/**
+ * _set_slave_idlemode: set the OCP_SYSCONFIG SIDLEMODE field in @v
+ * @oh: struct omap_hwmod *
+ * @idlemode: SIDLEMODE field bits
+ * @v: pointer to register contents to modify
+ *
+ * Update the slave idle mode bits in @v to be @idlemode for the @oh
+ * hwmod.  Does not write to the hardware.  Returns -EINVAL upon error
+ * or 0 upon success.
+ */
+static int _set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode, u32 *v)
+{
+	if (!oh->sysconfig ||
+	    !(oh->sysconfig->sysc_flags & SYSC_HAS_SIDLEMODE))
+		return -EINVAL;
+
+	*v &= ~SYSC_SIDLEMODE_MASK;
+	*v |= __ffs(idlemode) << SYSC_SIDLEMODE_SHIFT;
+
+	return 0;
+}
+
+/**
+ * _set_clockactivity: set OCP_SYSCONFIG.CLOCKACTIVITY bits in @v
+ * @oh: struct omap_hwmod *
+ * @clockact: CLOCKACTIVITY field bits
+ * @v: pointer to register contents to modify
+ *
+ * Update the clockactivity mode bits in @v to be @clockact for the
+ * @oh hwmod.  Used for additional powersaving on some modules.  Does
+ * not write to the hardware.  Returns -EINVAL upon error or 0 upon
+ * success.
+ */
+static int _set_clockactivity(struct omap_hwmod *oh, u8 clockact, u32 *v)
+{
+	if (!oh->sysconfig ||
+	    !(oh->sysconfig->sysc_flags & SYSC_HAS_CLOCKACTIVITY))
+		return -EINVAL;
+
+	*v &= ~SYSC_CLOCKACTIVITY_MASK;
+	*v |= clockact << SYSC_CLOCKACTIVITY_SHIFT;
+
+	return 0;
+}
+
+/**
+ * _set_softreset: set OCP_SYSCONFIG.CLOCKACTIVITY bits in @v
+ * @oh: struct omap_hwmod *
+ * @v: pointer to register contents to modify
+ *
+ * Set the SOFTRESET bit in @v for hwmod @oh.  Returns -EINVAL upon
+ * error or 0 upon success.
+ */
+static int _set_softreset(struct omap_hwmod *oh, u32 *v)
+{
+	if (!oh->sysconfig ||
+	    !(oh->sysconfig->sysc_flags & SYSC_HAS_SOFTRESET))
+		return -EINVAL;
+
+	*v |= SYSC_SOFTRESET_MASK;
+
+	return 0;
+}
+
+/**
+ * _enable_wakeup: set OCP_SYSCONFIG.ENAWAKEUP bit in the hardware
+ * @oh: struct omap_hwmod *
+ *
+ * Allow the hardware module @oh to send wakeups.  Returns -EINVAL
+ * upon error or 0 upon success.
+ */
+static int _enable_wakeup(struct omap_hwmod *oh)
+{
+	u32 v;
+
+	if (!oh->sysconfig ||
+	    !(oh->sysconfig->sysc_flags & SYSC_HAS_ENAWAKEUP))
+		return -EINVAL;
+
+	v = oh->_sysc_cache;
+	v |= SYSC_ENAWAKEUP_MASK;
+	_write_sysconfig(v, oh);
+
+	/* XXX test pwrdm_get_wken for this hwmod's subsystem */
+
+	oh->_int_flags |= _HWMOD_WAKEUP_ENABLED;
+
+	return 0;
+}
+
+/**
+ * _disable_wakeup: clear OCP_SYSCONFIG.ENAWAKEUP bit in the hardware
+ * @oh: struct omap_hwmod *
+ *
+ * Prevent the hardware module @oh to send wakeups.  Returns -EINVAL
+ * upon error or 0 upon success.
+ */
+static int _disable_wakeup(struct omap_hwmod *oh)
+{
+	u32 v;
+
+	if (!oh->sysconfig ||
+	    !(oh->sysconfig->sysc_flags & SYSC_HAS_ENAWAKEUP))
+		return -EINVAL;
+
+	v = oh->_sysc_cache;
+	v &= ~SYSC_ENAWAKEUP_MASK;
+	_write_sysconfig(v, oh);
+
+	/* XXX test pwrdm_get_wken for this hwmod's subsystem */
+
+	oh->_int_flags &= ~_HWMOD_WAKEUP_ENABLED;
+
+	return 0;
+}
+
+/**
+ * _add_initiator_dep: prevent @oh from smart-idling while @init_oh is active
+ * @oh: struct omap_hwmod *
+ *
+ * Prevent the hardware module @oh from entering idle while the
+ * hardare module initiator @init_oh is active.  Useful when a module
+ * will be accessed by a particular initiator (e.g., if a module will
+ * be accessed by the IVA, there should be a sleepdep between the IVA
+ * initiator and the module).  Only applies to modules in smart-idle
+ * mode.  Returns -EINVAL upon error or passes along
+ * pwrdm_add_sleepdep() value upon success.
+ */
+static int _add_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
+{
+	if (!oh->_clk)
+		return -EINVAL;
+
+	return pwrdm_add_sleepdep(oh->_clk->clkdm->pwrdm.ptr,
+				  init_oh->_clk->clkdm->pwrdm.ptr);
+}
+
+/**
+ * _del_initiator_dep: allow @oh to smart-idle even if @init_oh is active
+ * @oh: struct omap_hwmod *
+ *
+ * Allow the hardware module @oh to enter idle while the hardare
+ * module initiator @init_oh is active.  Useful when a module will not
+ * be accessed by a particular initiator (e.g., if a module will not
+ * be accessed by the IVA, there should be no sleepdep between the IVA
+ * initiator and the module).  Only applies to modules in smart-idle
+ * mode.  Returns -EINVAL upon error or passes along
+ * pwrdm_add_sleepdep() value upon success.
+ */
+static int _del_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
+{
+	if (!oh->_clk)
+		return -EINVAL;
+
+	return pwrdm_del_sleepdep(oh->_clk->clkdm->pwrdm.ptr,
+				  init_oh->_clk->clkdm->pwrdm.ptr);
+}
+
+/**
+ * _init_main_clk - get a struct clk * for the the hwmod's main functional clk
+ * @oh: struct omap_hwmod *
+ *
+ * Called from _init_clocks().  Populates the @oh _clk (main
+ * functional clock pointer) if a main_clk is present.  Returns 0 on
+ * success or -EINVAL on error.
+ */
+static int _init_main_clk(struct omap_hwmod *oh)
+{
+	struct clk *c;
+	int ret = 0;
+
+	if (!oh->clkdev_con_id)
+		return 0;
+
+	c = clk_get_sys(oh->clkdev_dev_id, oh->clkdev_con_id);
+	WARN(IS_ERR(c), "omap_hwmod: %s: cannot clk_get main_clk %s.%s\n",
+	     oh->name, oh->clkdev_dev_id, oh->clkdev_con_id);
+	if (IS_ERR(c))
+		ret = -EINVAL;
+	oh->_clk = c;
+
+	return ret;
+}
+
+/**
+ * _init_interface_clk - get a struct clk * for the the hwmod's interface clks
+ * @oh: struct omap_hwmod *
+ *
+ * Called from _init_clocks().  Populates the @oh OCP slave interface
+ * clock pointers.  Returns 0 on success or -EINVAL on error.
+ */
+static int _init_interface_clks(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_ocp_if *os;
+	struct clk *c;
+	int i;
+	int ret = 0;
+
+	if (oh->slaves_cnt == 0)
+		return 0;
+
+	for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) {
+		if (!os->clkdev_con_id)
+			continue;
+
+		c = clk_get_sys(os->clkdev_dev_id, os->clkdev_con_id);
+		WARN(IS_ERR(c), "omap_hwmod: %s: cannot clk_get "
+		     "interface_clk %s.%s\n", oh->name,
+		     os->clkdev_dev_id, os->clkdev_con_id);
+		if (IS_ERR(c))
+			ret = -EINVAL;
+		os->_clk = c;
+	}
+
+	return ret;
+}
+
+/**
+ * _init_opt_clk - get a struct clk * for the the hwmod's optional clocks
+ * @oh: struct omap_hwmod *
+ *
+ * Called from _init_clocks().  Populates the @oh omap_hwmod_opt_clk
+ * clock pointers.  Returns 0 on success or -EINVAL on error.
+ */
+static int _init_opt_clks(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_opt_clk *oc;
+	struct clk *c;
+	int i;
+	int ret = 0;
+
+	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) {
+		c = clk_get_sys(oc->clkdev_dev_id, oc->clkdev_con_id);
+		WARN(IS_ERR(c), "omap_hwmod: %s: cannot clk_get opt_clk "
+		     "%s.%s\n", oh->name, oc->clkdev_dev_id,
+		     oc->clkdev_con_id);
+		if (IS_ERR(c))
+			ret = -EINVAL;
+		oc->_clk = c;
+	}
+
+	return ret;
+}
+
+/**
+ * _enable_clocks - enable hwmod main clock and interface clocks
+ * @oh: struct omap_hwmod *
+ *
+ * Enables all clocks necessary for register reads and writes to succeed
+ * on the hwmod @oh.  Returns 0.
+ */
+static int _enable_clocks(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_ocp_if *os;
+	int i;
+
+	pr_debug("omap_hwmod: %s: enabling clocks\n", oh->name);
+
+	if (oh->_clk && !IS_ERR(oh->_clk))
+		clk_enable(oh->_clk);
+
+	if (oh->slaves_cnt > 0) {
+		for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) {
+			struct clk *c = os->_clk;
+
+			if (c && !IS_ERR(c) && (os->flags & OCPIF_SWSUP_IDLE))
+				clk_enable(c);
+		}
+	}
+
+	/* The opt clocks are controlled by the device driver. */
+
+	return 0;
+}
+
+/**
+ * _disable_clocks - disable hwmod main clock and interface clocks
+ * @oh: struct omap_hwmod *
+ *
+ * Disables the hwmod @oh main functional and interface clocks.  Returns 0.
+ */
+static int _disable_clocks(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_ocp_if *os;
+	int i;
+
+	pr_debug("omap_hwmod: %s: disabling clocks\n", oh->name);
+
+	if (oh->_clk && !IS_ERR(oh->_clk))
+		clk_disable(oh->_clk);
+
+	if (oh->slaves_cnt > 0) {
+		for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) {
+			struct clk *c = os->_clk;
+
+			if (c && !IS_ERR(c) && (os->flags & OCPIF_SWSUP_IDLE))
+				clk_disable(c);
+		}
+	}
+
+	/* The opt clocks are controlled by the device driver. */
+
+	return 0;
+}
+
+/**
+ * _find_mpu_port_index - find hwmod OCP slave port ID intended for MPU use
+ * @oh: struct omap_hwmod *
+ *
+ * Returns the array index of the OCP slave port that the MPU
+ * addresses the device on, or -EINVAL upon error or not found.
+ */
+static int _find_mpu_port_index(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_ocp_if *os;
+	int i;
+	int found = 0;
+
+	if (!oh || oh->slaves_cnt == 0)
+		return -EINVAL;
+
+	for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) {
+		if (os->user & OCP_USER_MPU) {
+			found = 1;
+			break;
+		}
+	}
+
+	if (found)
+		pr_debug("omap_hwmod: %s: MPU OCP slave port ID  %d\n",
+			 oh->name, i);
+	else
+		pr_debug("omap_hwmod: %s: no MPU OCP slave port found\n",
+			 oh->name);
+
+	return (found) ? i : -EINVAL;
+}
+
+/**
+ * _find_mpu_rt_base - find hwmod register target base addr accessible by MPU
+ * @oh: struct omap_hwmod *
+ *
+ * Return the virtual address of the base of the register target of
+ * device @oh, or NULL on error.
+ */
+static void __iomem *_find_mpu_rt_base(struct omap_hwmod *oh, u8 index)
+{
+	struct omap_hwmod_ocp_if *os;
+	struct omap_hwmod_addr_space *mem;
+	int i;
+	int found = 0;
+
+	if (!oh || oh->slaves_cnt == 0)
+		return NULL;
+
+	os = *oh->slaves + index;
+
+	for (i = 0, mem = os->addr; i < os->addr_cnt; i++, mem++) {
+		if (mem->flags & ADDR_TYPE_RT) {
+			found = 1;
+			break;
+		}
+	}
+
+	/* XXX use ioremap() instead? */
+
+	if (found)
+		pr_debug("omap_hwmod: %s: MPU register target at va %p\n",
+			 oh->name, OMAP2_IO_ADDRESS(mem->pa_start));
+	else
+		pr_debug("omap_hwmod: %s: no MPU register target found\n",
+			 oh->name);
+
+	return (found) ? OMAP2_IO_ADDRESS(mem->pa_start) : NULL;
+}
+
+/**
+ * _sysc_enable - try to bring a module out of idle via OCP_SYSCONFIG
+ * @oh: struct omap_hwmod *
+ *
+ * If module is marked as SWSUP_SIDLE, force the module out of slave
+ * idle; otherwise, configure it for smart-idle.  If module is marked
+ * as SWSUP_MSUSPEND, force the module out of master standby;
+ * otherwise, configure it for smart-standby.  No return value.
+ */
+static void _sysc_enable(struct omap_hwmod *oh)
+{
+	u8 idlemode;
+	u32 v;
+
+	if (!oh->sysconfig)
+		return;
+
+	v = oh->_sysc_cache;
+
+	if (oh->sysconfig->sysc_flags & SYSC_HAS_SIDLEMODE) {
+		idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
+			HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART;
+		_set_slave_idlemode(oh, idlemode, &v);
+	}
+
+	if (oh->sysconfig->sysc_flags & SYSC_HAS_MIDLEMODE) {
+		idlemode = (oh->flags & HWMOD_SWSUP_MSTANDBY) ?
+			HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART;
+		_set_master_standbymode(oh, idlemode, &v);
+	}
+
+	/* XXX OCP AUTOIDLE bit? */
+
+	if (oh->flags & HWMOD_SET_DEFAULT_CLOCKACT &&
+	    oh->sysconfig->sysc_flags & SYSC_HAS_CLOCKACTIVITY)
+		_set_clockactivity(oh, oh->sysconfig->clockact, &v);
+
+	_write_sysconfig(v, oh);
+}
+
+/**
+ * _sysc_idle - try to put a module into idle via OCP_SYSCONFIG
+ * @oh: struct omap_hwmod *
+ *
+ * If module is marked as SWSUP_SIDLE, force the module into slave
+ * idle; otherwise, configure it for smart-idle.  If module is marked
+ * as SWSUP_MSUSPEND, force the module into master standby; otherwise,
+ * configure it for smart-standby.  No return value.
+ */
+static void _sysc_idle(struct omap_hwmod *oh)
+{
+	u8 idlemode;
+	u32 v;
+
+	if (!oh->sysconfig)
+		return;
+
+	v = oh->_sysc_cache;
+
+	if (oh->sysconfig->sysc_flags & SYSC_HAS_SIDLEMODE) {
+		idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
+			HWMOD_IDLEMODE_FORCE : HWMOD_IDLEMODE_SMART;
+		_set_slave_idlemode(oh, idlemode, &v);
+	}
+
+	if (oh->sysconfig->sysc_flags & SYSC_HAS_MIDLEMODE) {
+		idlemode = (oh->flags & HWMOD_SWSUP_MSTANDBY) ?
+			HWMOD_IDLEMODE_FORCE : HWMOD_IDLEMODE_SMART;
+		_set_master_standbymode(oh, idlemode, &v);
+	}
+
+	_write_sysconfig(v, oh);
+}
+
+/**
+ * _sysc_shutdown - force a module into idle via OCP_SYSCONFIG
+ * @oh: struct omap_hwmod *
+ *
+ * Force the module into slave idle and master suspend. No return
+ * value.
+ */
+static void _sysc_shutdown(struct omap_hwmod *oh)
+{
+	u32 v;
+
+	if (!oh->sysconfig)
+		return;
+
+	v = oh->_sysc_cache;
+
+	if (oh->sysconfig->sysc_flags & SYSC_HAS_SIDLEMODE)
+		_set_slave_idlemode(oh, HWMOD_IDLEMODE_FORCE, &v);
+
+	if (oh->sysconfig->sysc_flags & SYSC_HAS_MIDLEMODE)
+		_set_master_standbymode(oh, HWMOD_IDLEMODE_FORCE, &v);
+
+	/* XXX clear OCP AUTOIDLE bit? */
+
+	_write_sysconfig(v, oh);
+}
+
+/**
+ * _lookup - find an omap_hwmod by name
+ * @name: find an omap_hwmod by name
+ *
+ * Return a pointer to an omap_hwmod by name, or NULL if not found.
+ * Caller must hold omap_hwmod_mutex.
+ */
+static struct omap_hwmod *_lookup(const char *name)
+{
+	struct omap_hwmod *oh, *temp_oh;
+
+	oh = NULL;
+
+	list_for_each_entry(temp_oh, &omap_hwmod_list, node) {
+		if (!strcmp(name, temp_oh->name)) {
+			oh = temp_oh;
+			break;
+		}
+	}
+
+	return oh;
+}
+
+/**
+ * _init_clocks - clk_get() all clocks associated with this hwmod
+ * @oh: struct omap_hwmod *
+ *
+ * Called by omap_hwmod_late_init() (after omap2_clk_init()).
+ * Resolves all clock names embedded in the hwmod.  Must be called
+ * with omap_hwmod_mutex held.  Returns -EINVAL if the omap_hwmod
+ * has not yet been registered or if the clocks have already been
+ * initialized, 0 on success, or a non-zero error on failure.
+ */
+static int _init_clocks(struct omap_hwmod *oh)
+{
+	int ret = 0;
+
+	if (!oh || (oh->_state != _HWMOD_STATE_REGISTERED))
+		return -EINVAL;
+
+	pr_debug("omap_hwmod: %s: looking up clocks\n", oh->name);
+
+	ret |= _init_main_clk(oh);
+	ret |= _init_interface_clks(oh);
+	ret |= _init_opt_clks(oh);
+
+	oh->_state = _HWMOD_STATE_CLKS_INITED;
+
+	return ret;
+}
+
+/**
+ * _wait_target_ready - wait for a module to leave slave idle
+ * @oh: struct omap_hwmod *
+ *
+ * Wait for a module @oh to leave slave idle.  Returns 0 if the module
+ * does not have an IDLEST bit or if the module successfully leaves
+ * slave idle; otherwise, pass along the return value of the
+ * appropriate *_cm_wait_module_ready() function.
+ */
+static int _wait_target_ready(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_ocp_if *os;
+	int ret;
+
+	if (!oh)
+		return -EINVAL;
+
+	if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
+		return 0;
+
+	os = *oh->slaves + oh->_mpu_port_index;
+
+	if (!(os->flags & OCPIF_HAS_IDLEST))
+		return 0;
+
+	/* XXX check module SIDLEMODE */
+
+	/* XXX check clock enable states */
+
+	if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
+		ret = omap2_cm_wait_module_ready(oh->prcm.omap2.module_offs,
+						 oh->prcm.omap2.idlest_reg_id,
+						 oh->prcm.omap2.idlest_idle_bit);
+#if 0
+	} else if (cpu_is_omap44xx()) {
+		ret = omap4_cm_wait_module_ready(oh->prcm.omap4.module_offs,
+						 oh->prcm.omap4.device_offs);
+#endif
+	} else {
+		BUG();
+	};
+
+	return ret;
+}
+
+/**
+ * _reset - reset an omap_hwmod
+ * @oh: struct omap_hwmod *
+ *
+ * Resets an omap_hwmod @oh via the OCP_SYSCONFIG bit.  hwmod must be
+ * enabled for this to work.  Must be called with omap_hwmod_mutex
+ * held.  Returns -EINVAL if the hwmod cannot be reset this way or if
+ * the hwmod is in the wrong state, -ETIMEDOUT if the module did not
+ * reset in time, or 0 upon success.
+ */
+static int _reset(struct omap_hwmod *oh)
+{
+	u32 r, v;
+	int c;
+
+	if (!oh->sysconfig ||
+	    !(oh->sysconfig->sysc_flags & SYSC_HAS_SOFTRESET) ||
+	    (oh->sysconfig->sysc_flags & SYSS_MISSING))
+		return -EINVAL;
+
+	/* clocks must be on for this operation */
+	if (oh->_state != _HWMOD_STATE_ENABLED) {
+		WARN(1, "omap_hwmod: %s: reset can only be entered from "
+		     "enabled state\n", oh->name);
+		return -EINVAL;
+	}
+
+	pr_debug("omap_hwmod: %s: resetting\n", oh->name);
+
+	v = oh->_sysc_cache;
+	r = _set_softreset(oh, &v);
+	if (r)
+		return r;
+	_write_sysconfig(v, oh);
+
+	c = 0;
+	while (c < MAX_MODULE_RESET_WAIT &&
+	       !(omap_hwmod_readl(oh, oh->sysconfig->syss_offs) &
+		 SYSS_RESETDONE_MASK)) {
+		udelay(1);
+		c++;
+	}
+
+	if (c == MAX_MODULE_RESET_WAIT)
+		WARN(1, "omap_hwmod: %s: failed to reset in %d usec\n",
+		     oh->name, MAX_MODULE_RESET_WAIT);
+	else
+		pr_debug("omap_hwmod: %s: reset in %d usec\n", oh->name,
+			 MAX_MODULE_RESET_WAIT);
+
+	/*
+	 * XXX add _HWMOD_STATE_WEDGED for modules that don't come back from
+	 * _wait_target_ready() or _reset()
+	 */
+
+	return (c == MAX_MODULE_RESET_WAIT) ? -ETIMEDOUT : 0;
+}
+
+/**
+ * _enable - enable an omap_hwmod
+ * @oh: struct omap_hwmod *
+ *
+ * Enables an omap_hwmod @oh such that the MPU can access the hwmod's
+ * register target.  Must be called with omap_hwmod_mutex held.
+ * Returns -EINVAL if the hwmod is in the wrong state or passes along
+ * the return value of _wait_target_ready().
+ */
+static int _enable(struct omap_hwmod *oh)
+{
+	int r;
+
+	if (oh->_state != _HWMOD_STATE_INITIALIZED &&
+	    oh->_state != _HWMOD_STATE_IDLE &&
+	    oh->_state != _HWMOD_STATE_DISABLED) {
+		WARN(1, "omap_hwmod: %s: enabled state can only be entered "
+		     "from initialized, idle, or disabled state\n", oh->name);
+		return -EINVAL;
+	}
+
+	pr_debug("omap_hwmod: %s: enabling\n", oh->name);
+
+	/* XXX mux balls */
+
+	_add_initiator_dep(oh, mpu_oh);
+	_enable_clocks(oh);
+
+	if (oh->sysconfig) {
+		if (!(oh->_int_flags & _HWMOD_SYSCONFIG_LOADED))
+			_update_sysc_cache(oh);
+		_sysc_enable(oh);
+	}
+
+	r = _wait_target_ready(oh);
+	if (!r)
+		oh->_state = _HWMOD_STATE_ENABLED;
+
+	return r;
+}
+
+/**
+ * _idle - idle an omap_hwmod
+ * @oh: struct omap_hwmod *
+ *
+ * Idles an omap_hwmod @oh.  This should be called once the hwmod has
+ * no further work.  Returns -EINVAL if the hwmod is in the wrong
+ * state or returns 0.
+ */
+static int _idle(struct omap_hwmod *oh)
+{
+	if (oh->_state != _HWMOD_STATE_ENABLED) {
+		WARN(1, "omap_hwmod: %s: idle state can only be entered from "
+		     "enabled state\n", oh->name);
+		return -EINVAL;
+	}
+
+	pr_debug("omap_hwmod: %s: idling\n", oh->name);
+
+	if (oh->sysconfig)
+		_sysc_idle(oh);
+	_del_initiator_dep(oh, mpu_oh);
+	_disable_clocks(oh);
+
+	oh->_state = _HWMOD_STATE_IDLE;
+
+	return 0;
+}
+
+/**
+ * _shutdown - shutdown an omap_hwmod
+ * @oh: struct omap_hwmod *
+ *
+ * Shut down an omap_hwmod @oh.  This should be called when the driver
+ * used for the hwmod is removed or unloaded or if the driver is not
+ * used by the system.  Returns -EINVAL if the hwmod is in the wrong
+ * state or returns 0.
+ */
+static int _shutdown(struct omap_hwmod *oh)
+{
+	if (oh->_state != _HWMOD_STATE_IDLE &&
+	    oh->_state != _HWMOD_STATE_ENABLED) {
+		WARN(1, "omap_hwmod: %s: disabled state can only be entered "
+		     "from idle, or enabled state\n", oh->name);
+		return -EINVAL;
+	}
+
+	pr_debug("omap_hwmod: %s: disabling\n", oh->name);
+
+	if (oh->sysconfig)
+		_sysc_shutdown(oh);
+	_del_initiator_dep(oh, mpu_oh);
+	/* XXX what about the other system initiators here? DMA, tesla, d2d */
+	_disable_clocks(oh);
+	/* XXX Should this code also force-disable the optional clocks? */
+
+	/* XXX mux any associated balls to safe mode */
+
+	oh->_state = _HWMOD_STATE_DISABLED;
+
+	return 0;
+}
+
+/**
+ * _write_clockact_lock - set the module's clockactivity bits
+ * @oh: struct omap_hwmod *
+ * @clockact: CLOCKACTIVITY field bits
+ *
+ * Writes the CLOCKACTIVITY bits @clockact to the hwmod @oh
+ * OCP_SYSCONFIG register.  Returns -EINVAL if the hwmod is in the
+ * wrong state or returns 0.
+ */
+static int _write_clockact_lock(struct omap_hwmod *oh, u8 clockact)
+{
+	u32 v;
+
+	if (!oh->sysconfig ||
+	    !(oh->sysconfig->sysc_flags & SYSC_HAS_CLOCKACTIVITY))
+		return -EINVAL;
+
+	mutex_lock(&omap_hwmod_mutex);
+	v = oh->_sysc_cache;
+	_set_clockactivity(oh, clockact, &v);
+	_write_sysconfig(v, oh);
+	mutex_unlock(&omap_hwmod_mutex);
+
+	return 0;
+}
+
+
+/**
+ * _setup - do initial configuration of omap_hwmod
+ * @oh: struct omap_hwmod *
+ *
+ * Writes the CLOCKACTIVITY bits @clockact to the hwmod @oh
+ * OCP_SYSCONFIG register.  Must be called with omap_hwmod_mutex
+ * held.  Returns -EINVAL if the hwmod is in the wrong state or returns
+ * 0.
+ */
+static int _setup(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_ocp_if *os;
+	int i;
+
+	if (!oh)
+		return -EINVAL;
+
+	/* Set iclk autoidle mode */
+	if (oh->slaves_cnt > 0) {
+		for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) {
+			struct clk *c = os->_clk;
+
+			if (!c || IS_ERR(c))
+				continue;
+
+			if (os->flags & OCPIF_SWSUP_IDLE) {
+				/* XXX omap_iclk_deny_idle(c); */
+			} else {
+				/* XXX omap_iclk_allow_idle(c); */
+				clk_enable(c);
+			}
+		}
+	}
+
+	oh->_state = _HWMOD_STATE_INITIALIZED;
+
+	_enable(oh);
+
+	if (!(oh->flags & HWMOD_INIT_NO_RESET))
+		_reset(oh);
+
+	/* XXX OCP AUTOIDLE bit? */
+	/* XXX OCP ENAWAKEUP bit? */
+
+	if (!(oh->flags & HWMOD_INIT_NO_IDLE))
+		_idle(oh);
+
+	return 0;
+}
+
+
+
+/* Public functions */
+
+u32 omap_hwmod_readl(struct omap_hwmod *oh, u16 reg_offs)
+{
+	return __raw_readl(oh->_rt_va + reg_offs);
+}
+
+void omap_hwmod_writel(u32 v, struct omap_hwmod *oh, u16 reg_offs)
+{
+	__raw_writel(v, oh->_rt_va + reg_offs);
+}
+
+/**
+ * omap_hwmod_register - register a struct omap_hwmod
+ * @oh: struct omap_hwmod *
+ *
+ * Registers the omap_hwmod @oh.  Returns -EEXIST if an omap_hwmod already
+ * has been registered by the same name; -EINVAL if the omap_hwmod is in the
+ * wrong state, or 0 on success.
+ *
+ * XXX The data should be copied into bootmem, so the original data
+ * should be marked __initdata and freed after init.  This would allow
+ * unneeded omap_hwmods to be freed on multi-OMAP configurations.  Note
+ * that the copy process would be relatively complex due to the large number
+ * of substructures.
+ */
+int omap_hwmod_register(struct omap_hwmod *oh)
+{
+	int ret, ms_id;
+
+	if (!oh || (oh->_state != _HWMOD_STATE_UNKNOWN))
+		return -EINVAL;
+
+	mutex_lock(&omap_hwmod_mutex);
+
+	pr_debug("omap_hwmod: %s: registering\n", oh->name);
+
+	if (_lookup(oh->name)) {
+		ret = -EEXIST;
+		goto ohr_unlock;
+	}
+
+	ms_id = _find_mpu_port_index(oh);
+	if (!IS_ERR_VALUE(ms_id)) {
+		oh->_mpu_port_index = ms_id;
+		oh->_rt_va = _find_mpu_rt_base(oh, oh->_mpu_port_index);
+	} else {
+		oh->_int_flags |= _HWMOD_NO_MPU_PORT;
+	}
+
+	list_add_tail(&oh->node, &omap_hwmod_list);
+
+	oh->_state = _HWMOD_STATE_REGISTERED;
+
+	ret = 0;
+
+ohr_unlock:
+	mutex_unlock(&omap_hwmod_mutex);
+	return ret;
+}
+
+/**
+ * omap_hwmod_lookup - look up a registered omap_hwmod by name
+ * @name: name of the omap_hwmod to look up
+ *
+ * Given a @name of an omap_hwmod, return a pointer to the registered
+ * struct omap_hwmod *, or NULL upon error.
+ */
+struct omap_hwmod *omap_hwmod_lookup(const char *name)
+{
+	struct omap_hwmod *oh;
+
+	if (!name)
+		return NULL;
+
+	mutex_lock(&omap_hwmod_mutex);
+	oh = _lookup(name);
+	mutex_unlock(&omap_hwmod_mutex);
+
+	return oh;
+}
+
+/**
+ * omap_hwmod_for_each - call function for each registered omap_hwmod
+ * @fn: pointer to a callback function
+ *
+ * Call @fn for each registered omap_hwmod, passing @data to each
+ * function.  @fn must return 0 for success or any other value for
+ * failure.  If @fn returns non-zero, the iteration across omap_hwmods
+ * will stop and the non-zero return value will be passed to the
+ * caller of omap_hwmod_for_each().  @fn is called with
+ * omap_hwmod_for_each() held.
+ */
+int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh))
+{
+	struct omap_hwmod *temp_oh;
+	int ret;
+
+	if (!fn)
+		return -EINVAL;
+
+	mutex_lock(&omap_hwmod_mutex);
+	list_for_each_entry(temp_oh, &omap_hwmod_list, node) {
+		ret = (*fn)(temp_oh);
+		if (ret)
+			break;
+	}
+	mutex_unlock(&omap_hwmod_mutex);
+
+	return ret;
+}
+
+
+/**
+ * omap_hwmod_init - init omap_hwmod code and register hwmods
+ * @ohs: pointer to an array of omap_hwmods to register
+ *
+ * Intended to be called early in boot before the clock framework is
+ * initialized.  If @ohs is not null, will register all omap_hwmods
+ * listed in @ohs that are valid for this chip.  Returns -EINVAL if
+ * omap_hwmod_init() has already been called or 0 otherwise.
+ */
+int omap_hwmod_init(struct omap_hwmod **ohs)
+{
+	struct omap_hwmod *oh;
+	int r;
+
+	if (inited)
+		return -EINVAL;
+
+	inited = 1;
+
+	if (!ohs)
+		return 0;
+
+	oh = *ohs;
+	while (oh) {
+		if (omap_chip_is(oh->omap_chip)) {
+			r = omap_hwmod_register(oh);
+			WARN(r, "omap_hwmod: %s: omap_hwmod_register returned "
+			     "%d\n", oh->name, r);
+		}
+		oh = *++ohs;
+	}
+
+	return 0;
+}
+
+/**
+ * omap_hwmod_late_init - do some post-clock framework initialization
+ *
+ * Must be called after omap2_clk_init().  Resolves the struct clk names
+ * to struct clk pointers for each registered omap_hwmod.  Also calls
+ * _setup() on each hwmod.  Returns 0.
+ */
+int omap_hwmod_late_init(void)
+{
+	int r;
+
+	/* XXX check return value */
+	r = omap_hwmod_for_each(_init_clocks);
+	WARN(r, "omap_hwmod: omap_hwmod_late_init(): _init_clocks failed\n");
+
+	mpu_oh = omap_hwmod_lookup(MPU_INITIATOR_NAME);
+	WARN(!mpu_oh, "omap_hwmod: could not find MPU initiator hwmod %s\n",
+	     MPU_INITIATOR_NAME);
+
+	omap_hwmod_for_each(_setup);
+
+	return 0;
+}
+
+/**
+ * omap_hwmod_unregister - unregister an omap_hwmod
+ * @oh: struct omap_hwmod *
+ *
+ * Unregisters a previously-registered omap_hwmod @oh.  There's probably
+ * no use case for this, so it is likely to be removed in a later version.
+ *
+ * XXX Free all of the bootmem-allocated structures here when that is
+ * implemented.  Make it clear that core code is the only code that is
+ * expected to unregister modules.
+ */
+int omap_hwmod_unregister(struct omap_hwmod *oh)
+{
+	if (!oh)
+		return -EINVAL;
+
+	pr_debug("omap_hwmod: %s: unregistering\n", oh->name);
+
+	mutex_lock(&omap_hwmod_mutex);
+	list_del(&oh->node);
+	mutex_unlock(&omap_hwmod_mutex);
+
+	return 0;
+}
+
+/**
+ * omap_hwmod_enable - enable an omap_hwmod
+ * @oh: struct omap_hwmod *
+ *
+ * Enable an omap_hwomd @oh.  Intended to be called by omap_device_enable().
+ * Returns -EINVAL on error or passes along the return value from _enable().
+ */
+int omap_hwmod_enable(struct omap_hwmod *oh)
+{
+	int r;
+
+	if (!oh)
+		return -EINVAL;
+
+	mutex_lock(&omap_hwmod_mutex);
+	r = _enable(oh);
+	mutex_unlock(&omap_hwmod_mutex);
+
+	return r;
+}
+
+/**
+ * omap_hwmod_idle - idle an omap_hwmod
+ * @oh: struct omap_hwmod *
+ *
+ * Idle an omap_hwomd @oh.  Intended to be called by omap_device_idle().
+ * Returns -EINVAL on error or passes along the return value from _idle().
+ */
+int omap_hwmod_idle(struct omap_hwmod *oh)
+{
+	if (!oh)
+		return -EINVAL;
+
+	mutex_lock(&omap_hwmod_mutex);
+	_idle(oh);
+	mutex_unlock(&omap_hwmod_mutex);
+
+	return 0;
+}
+
+/**
+ * omap_hwmod_shutdown - shutdown an omap_hwmod
+ * @oh: struct omap_hwmod *
+ *
+ * Shutdown an omap_hwomd @oh.  Intended to be called by
+ * omap_device_shutdown().  Returns -EINVAL on error or passes along
+ * the return value from _shutdown().
+ */
+int omap_hwmod_shutdown(struct omap_hwmod *oh)
+{
+	if (!oh)
+		return -EINVAL;
+
+	mutex_lock(&omap_hwmod_mutex);
+	_shutdown(oh);
+	mutex_unlock(&omap_hwmod_mutex);
+
+	return 0;
+}
+
+/**
+ * omap_hwmod_enable_clocks - enable main_clk, all interface clocks
+ * @oh: struct omap_hwmod *oh
+ *
+ * Intended to be called by the omap_device code.
+ */
+int omap_hwmod_enable_clocks(struct omap_hwmod *oh)
+{
+	mutex_lock(&omap_hwmod_mutex);
+	_enable_clocks(oh);
+	mutex_unlock(&omap_hwmod_mutex);
+
+	return 0;
+}
+
+/**
+ * omap_hwmod_disable_clocks - disable main_clk, all interface clocks
+ * @oh: struct omap_hwmod *oh
+ *
+ * Intended to be called by the omap_device code.
+ */
+int omap_hwmod_disable_clocks(struct omap_hwmod *oh)
+{
+	mutex_lock(&omap_hwmod_mutex);
+	_disable_clocks(oh);
+	mutex_unlock(&omap_hwmod_mutex);
+
+	return 0;
+}
+
+/**
+ * omap_hwmod_ocp_barrier - wait for posted writes against the hwmod to complete
+ * @oh: struct omap_hwmod *oh
+ *
+ * Intended to be called by drivers and core code when all posted
+ * writes to a device must complete before continuing further
+ * execution (for example, after clearing some device IRQSTATUS
+ * register bits)
+ *
+ * XXX what about targets with multiple OCP threads?
+ */
+void omap_hwmod_ocp_barrier(struct omap_hwmod *oh)
+{
+	BUG_ON(!oh);
+
+	if (!oh->sysconfig || !oh->sysconfig->sysc_flags) {
+		WARN(1, "omap_device: %s: OCP barrier impossible due to "
+		      "device configuration\n", oh->name);
+		return;
+	}
+
+	/*
+	 * Forces posted writes to complete on the OCP thread handling
+	 * register writes
+	 */
+	omap_hwmod_readl(oh, oh->sysconfig->sysc_offs);
+}
+
+/**
+ * omap_hwmod_reset - reset the hwmod
+ * @oh: struct omap_hwmod *
+ *
+ * Under some conditions, a driver may wish to reset the entire device.
+ * Called from omap_device code.  Returns -EINVAL on error or passes along
+ * the return value from _reset()/_enable().
+ */
+int omap_hwmod_reset(struct omap_hwmod *oh)
+{
+	int r;
+
+	if (!oh || !(oh->_state & _HWMOD_STATE_ENABLED))
+		return -EINVAL;
+
+	mutex_lock(&omap_hwmod_mutex);
+	r = _reset(oh);
+	if (!r)
+		r = _enable(oh);
+	mutex_unlock(&omap_hwmod_mutex);
+
+	return r;
+}
+
+/**
+ * omap_hwmod_count_resources - count number of struct resources needed by hwmod
+ * @oh: struct omap_hwmod *
+ * @res: pointer to the first element of an array of struct resource to fill
+ *
+ * Count the number of struct resource array elements necessary to
+ * contain omap_hwmod @oh resources.  Intended to be called by code
+ * that registers omap_devices.  Intended to be used to determine the
+ * size of a dynamically-allocated struct resource array, before
+ * calling omap_hwmod_fill_resources().  Returns the number of struct
+ * resource array elements needed.
+ *
+ * XXX This code is not optimized.  It could attempt to merge adjacent
+ * resource IDs.
+ *
+ */
+int omap_hwmod_count_resources(struct omap_hwmod *oh)
+{
+	int ret, i;
+
+	ret = oh->mpu_irqs_cnt + oh->sdma_chs_cnt;
+
+	for (i = 0; i < oh->slaves_cnt; i++)
+		ret += (*oh->slaves + i)->addr_cnt;
+
+	return ret;
+}
+
+/**
+ * omap_hwmod_fill_resources - fill struct resource array with hwmod data
+ * @oh: struct omap_hwmod *
+ * @res: pointer to the first element of an array of struct resource to fill
+ *
+ * Fill the struct resource array @res with resource data from the
+ * omap_hwmod @oh.  Intended to be called by code that registers
+ * omap_devices.  See also omap_hwmod_count_resources().  Returns the
+ * number of array elements filled.
+ */
+int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res)
+{
+	int i, j;
+	int r = 0;
+
+	/* For each IRQ, DMA, memory area, fill in array.*/
+
+	for (i = 0; i < oh->mpu_irqs_cnt; i++) {
+		(res + r)->start = *(oh->mpu_irqs + i);
+		(res + r)->end = *(oh->mpu_irqs + i);
+		(res + r)->flags = IORESOURCE_IRQ;
+		r++;
+	}
+
+	for (i = 0; i < oh->sdma_chs_cnt; i++) {
+		(res + r)->name = (oh->sdma_chs + i)->name;
+		(res + r)->start = (oh->sdma_chs + i)->dma_ch;
+		(res + r)->end = (oh->sdma_chs + i)->dma_ch;
+		(res + r)->flags = IORESOURCE_DMA;
+		r++;
+	}
+
+	for (i = 0; i < oh->slaves_cnt; i++) {
+		struct omap_hwmod_ocp_if *os;
+
+		os = *oh->slaves + i;
+
+		for (j = 0; j < os->addr_cnt; j++) {
+			(res + r)->start = (os->addr + j)->pa_start;
+			(res + r)->end = (os->addr + j)->pa_end;
+			(res + r)->flags = IORESOURCE_MEM;
+			r++;
+		}
+	}
+
+	return r;
+}
+
+/**
+ * omap_hwmod_get_pwrdm - return pointer to this module's main powerdomain
+ * @oh: struct omap_hwmod *
+ *
+ * Return the powerdomain pointer associated with the OMAP module
+ * @oh's main clock.  If @oh does not have a main clk, return the
+ * powerdomain associated with the interface clock associated with the
+ * module's MPU port. (XXX Perhaps this should use the SDMA port
+ * instead?)  Returns NULL on error, or a struct powerdomain * on
+ * success.
+ */
+struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh)
+{
+	struct clk *c;
+
+	if (!oh)
+		return NULL;
+
+	if (oh->_clk) {
+		c = oh->_clk;
+	} else {
+		if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
+			return NULL;
+		c = oh->slaves[oh->_mpu_port_index]->_clk;
+	}
+
+	return c->clkdm->pwrdm.ptr;
+
+}
+
+/**
+ * omap_hwmod_add_initiator_dep - add sleepdep from @init_oh to @oh
+ * @oh: struct omap_hwmod *
+ * @init_oh: struct omap_hwmod * (initiator)
+ *
+ * Add a sleep dependency between the initiator @init_oh and @oh.
+ * Intended to be called by DSP/Bridge code via platform_data for the
+ * DSP case; and by the DMA code in the sDMA case.  DMA code, *Bridge
+ * code needs to add/del initiator dependencies dynamically
+ * before/after accessing a device.  Returns the return value from
+ * _add_initiator_dep().
+ *
+ * XXX Keep a usecount in the clockdomain code
+ */
+int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh,
+				 struct omap_hwmod *init_oh)
+{
+	return _add_initiator_dep(oh, init_oh);
+}
+
+/*
+ * XXX what about functions for drivers to save/restore ocp_sysconfig
+ * for context save/restore operations?
+ */
+
+/**
+ * omap_hwmod_del_initiator_dep - remove sleepdep from @init_oh to @oh
+ * @oh: struct omap_hwmod *
+ * @init_oh: struct omap_hwmod * (initiator)
+ *
+ * Remove a sleep dependency between the initiator @init_oh and @oh.
+ * Intended to be called by DSP/Bridge code via platform_data for the
+ * DSP case; and by the DMA code in the sDMA case.  DMA code, *Bridge
+ * code needs to add/del initiator dependencies dynamically
+ * before/after accessing a device.  Returns the return value from
+ * _del_initiator_dep().
+ *
+ * XXX Keep a usecount in the clockdomain code
+ */
+int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh,
+				 struct omap_hwmod *init_oh)
+{
+	return _del_initiator_dep(oh, init_oh);
+}
+
+/**
+ * omap_hwmod_set_clockact_none - set clockactivity test to BOTH
+ * @oh: struct omap_hwmod *
+ *
+ * On some modules, this function can affect the wakeup latency vs.
+ * power consumption balance.  Intended to be called by the
+ * omap_device layer.  Passes along the return value from
+ * _write_clockact_lock().
+ */
+int omap_hwmod_set_clockact_both(struct omap_hwmod *oh)
+{
+	return _write_clockact_lock(oh, CLOCKACT_TEST_BOTH);
+}
+
+/**
+ * omap_hwmod_set_clockact_none - set clockactivity test to MAIN
+ * @oh: struct omap_hwmod *
+ *
+ * On some modules, this function can affect the wakeup latency vs.
+ * power consumption balance.  Intended to be called by the
+ * omap_device layer.  Passes along the return value from
+ * _write_clockact_lock().
+ */
+int omap_hwmod_set_clockact_main(struct omap_hwmod *oh)
+{
+	return _write_clockact_lock(oh, CLOCKACT_TEST_MAIN);
+}
+
+/**
+ * omap_hwmod_set_clockact_none - set clockactivity test to ICLK
+ * @oh: struct omap_hwmod *
+ *
+ * On some modules, this function can affect the wakeup latency vs.
+ * power consumption balance.  Intended to be called by the
+ * omap_device layer.  Passes along the return value from
+ * _write_clockact_lock().
+ */
+int omap_hwmod_set_clockact_iclk(struct omap_hwmod *oh)
+{
+	return _write_clockact_lock(oh, CLOCKACT_TEST_ICLK);
+}
+
+/**
+ * omap_hwmod_set_clockact_none - set clockactivity test to NONE
+ * @oh: struct omap_hwmod *
+ *
+ * On some modules, this function can affect the wakeup latency vs.
+ * power consumption balance.  Intended to be called by the
+ * omap_device layer.  Passes along the return value from
+ * _write_clockact_lock().
+ */
+int omap_hwmod_set_clockact_none(struct omap_hwmod *oh)
+{
+	return _write_clockact_lock(oh, CLOCKACT_TEST_NONE);
+}
+
+/**
+ * omap_hwmod_enable_wakeup - allow device to wake up the system
+ * @oh: struct omap_hwmod *
+ *
+ * Sets the module OCP socket ENAWAKEUP bit to allow the module to
+ * send wakeups to the PRCM.  Eventually this should sets PRCM wakeup
+ * registers to cause the PRCM to receive wakeup events from the
+ * module.  Does not set any wakeup routing registers beyond this
+ * point - if the module is to wake up any other module or subsystem,
+ * that must be set separately.  Called by omap_device code.  Returns
+ * -EINVAL on error or 0 upon success.
+ */
+int omap_hwmod_enable_wakeup(struct omap_hwmod *oh)
+{
+	if (!oh->sysconfig ||
+	    !(oh->sysconfig->sysc_flags & SYSC_HAS_ENAWAKEUP))
+		return -EINVAL;
+
+	mutex_lock(&omap_hwmod_mutex);
+	_enable_wakeup(oh);
+	mutex_unlock(&omap_hwmod_mutex);
+
+	return 0;
+}
+
+/**
+ * omap_hwmod_disable_wakeup - prevent device from waking the system
+ * @oh: struct omap_hwmod *
+ *
+ * Clears the module OCP socket ENAWAKEUP bit to prevent the module
+ * from sending wakeups to the PRCM.  Eventually this should clear
+ * PRCM wakeup registers to cause the PRCM to ignore wakeup events
+ * from the module.  Does not set any wakeup routing registers beyond
+ * this point - if the module is to wake up any other module or
+ * subsystem, that must be set separately.  Called by omap_device
+ * code.  Returns -EINVAL on error or 0 upon success.
+ */
+int omap_hwmod_disable_wakeup(struct omap_hwmod *oh)
+{
+	if (!oh->sysconfig ||
+	    !(oh->sysconfig->sysc_flags & SYSC_HAS_ENAWAKEUP))
+		return -EINVAL;
+
+	mutex_lock(&omap_hwmod_mutex);
+	_disable_wakeup(oh);
+	mutex_unlock(&omap_hwmod_mutex);
+
+	return 0;
+}
diff --git a/arch/arm/plat-omap/include/mach/omap_hwmod.h b/arch/arm/plat-omap/include/mach/omap_hwmod.h
new file mode 100644
index 00000000000..1f79c20e292
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap_hwmod.h
@@ -0,0 +1,447 @@
+/*
+ * omap_hwmod macros, structures
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * Created in collaboration with (alphabetical order): Benoit Cousson,
+ * Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari
+ * Poussa, Anand Sawant, Santosh Shilimkar, Richard Woodruff
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * These headers and macros are used to define OMAP on-chip module
+ * data and their integration with other OMAP modules and Linux.
+ *
+ * References:
+ * - OMAP2420 Multimedia Processor Silicon Revision 2.1.1, 2.2 (SWPU064)
+ * - OMAP2430 Multimedia Device POP Silicon Revision 2.1 (SWPU090)
+ * - OMAP34xx Multimedia Device Silicon Revision 3.1 (SWPU108)
+ * - OMAP4430 Multimedia Device Silicon Revision 1.0 (SWPU140)
+ * - Open Core Protocol Specification 2.2
+ *
+ * To do:
+ * - add interconnect error log structures
+ * - add pinmuxing
+ * - init_conn_id_bit (CONNID_BIT_VECTOR)
+ * - implement default hwmod SMS/SDRC flags?
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
+
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+
+#include <mach/cpu.h>
+
+struct omap_device;
+
+/* OCP SYSCONFIG bit shifts/masks */
+#define SYSC_MIDLEMODE_SHIFT		12
+#define SYSC_MIDLEMODE_MASK		(0x3 << SYSC_MIDLEMODE_SHIFT)
+#define SYSC_CLOCKACTIVITY_SHIFT	8
+#define SYSC_CLOCKACTIVITY_MASK		(0x3 << SYSC_CLOCKACTIVITY_SHIFT)
+#define SYSC_SIDLEMODE_SHIFT		3
+#define SYSC_SIDLEMODE_MASK		(0x3 << SYSC_SIDLEMODE_SHIFT)
+#define SYSC_ENAWAKEUP_SHIFT		2
+#define SYSC_ENAWAKEUP_MASK		(1 << SYSC_ENAWAKEUP_SHIFT)
+#define SYSC_SOFTRESET_SHIFT		1
+#define SYSC_SOFTRESET_MASK		(1 << SYSC_SOFTRESET_SHIFT)
+
+/* OCP SYSSTATUS bit shifts/masks */
+#define SYSS_RESETDONE_SHIFT		0
+#define SYSS_RESETDONE_MASK		(1 << SYSS_RESETDONE_SHIFT)
+
+/* Master standby/slave idle mode flags */
+#define HWMOD_IDLEMODE_FORCE		(1 << 0)
+#define HWMOD_IDLEMODE_NO		(1 << 1)
+#define HWMOD_IDLEMODE_SMART		(1 << 2)
+
+
+/**
+ * struct omap_hwmod_dma_info - MPU address space handled by the hwmod
+ * @name: name of the DMA channel (module local name)
+ * @dma_ch: DMA channel ID
+ *
+ * @name should be something short, e.g., "tx" or "rx".  It is for use
+ * by platform_get_resource_byname().  It is defined locally to the
+ * hwmod.
+ */
+struct omap_hwmod_dma_info {
+	const char	*name;
+	u16		dma_ch;
+};
+
+/**
+ * struct omap_hwmod_opt_clk - optional clocks used by this hwmod
+ * @role: "sys", "32k", "tv", etc -- for use in clk_get()
+ * @clkdev_dev_id: opt clock: clkdev dev_id string
+ * @clkdev_con_id: opt clock: clkdev con_id string
+ * @_clk: pointer to the struct clk (filled in at runtime)
+ *
+ * The module's interface clock and main functional clock should not
+ * be added as optional clocks.
+ */
+struct omap_hwmod_opt_clk {
+	const char	*role;
+	const char	*clkdev_dev_id;
+	const char	*clkdev_con_id;
+	struct clk	*_clk;
+};
+
+
+/* omap_hwmod_omap2_firewall.flags bits */
+#define OMAP_FIREWALL_L3		(1 << 0)
+#define OMAP_FIREWALL_L4		(1 << 1)
+
+/**
+ * struct omap_hwmod_omap2_firewall - OMAP2/3 device firewall data
+ * @l3_perm_bit: bit shift for L3_PM_*_PERMISSION_*
+ * @l4_fw_region: L4 firewall region ID
+ * @l4_prot_group: L4 protection group ID
+ * @flags: (see omap_hwmod_omap2_firewall.flags macros above)
+ */
+struct omap_hwmod_omap2_firewall {
+	u8 l3_perm_bit;
+	u8 l4_fw_region;
+	u8 l4_prot_group;
+	u8 flags;
+};
+
+
+/*
+ * omap_hwmod_addr_space.flags bits
+ *
+ * ADDR_MAP_ON_INIT: Map this address space during omap_hwmod init.
+ * ADDR_TYPE_RT: Address space contains module register target data.
+ */
+#define ADDR_MAP_ON_INIT	(1 << 0)
+#define ADDR_TYPE_RT		(1 << 1)
+
+/**
+ * struct omap_hwmod_addr_space - MPU address space handled by the hwmod
+ * @pa_start: starting physical address
+ * @pa_end: ending physical address
+ * @flags: (see omap_hwmod_addr_space.flags macros above)
+ *
+ * Address space doesn't necessarily follow physical interconnect
+ * structure.  GPMC is one example.
+ */
+struct omap_hwmod_addr_space {
+	u32 pa_start;
+	u32 pa_end;
+	u8 flags;
+};
+
+
+/*
+ * omap_hwmod_ocp_if.user bits: these indicate the initiators that use this
+ * interface to interact with the hwmod.  Used to add sleep dependencies
+ * when the module is enabled or disabled.
+ */
+#define OCP_USER_MPU			(1 << 0)
+#define OCP_USER_SDMA			(1 << 1)
+
+/* omap_hwmod_ocp_if.flags bits */
+#define OCPIF_HAS_IDLEST		(1 << 0)
+#define OCPIF_SWSUP_IDLE		(1 << 1)
+#define OCPIF_CAN_BURST			(1 << 2)
+
+/**
+ * struct omap_hwmod_ocp_if - OCP interface data
+ * @master: struct omap_hwmod that initiates OCP transactions on this link
+ * @slave: struct omap_hwmod that responds to OCP transactions on this link
+ * @addr: address space associated with this link
+ * @clkdev_dev_id: interface clock: clkdev dev_id string
+ * @clkdev_con_id: interface clock: clkdev con_id string
+ * @_clk: pointer to the interface struct clk (filled in at runtime)
+ * @fw: interface firewall data
+ * @addr_cnt: ARRAY_SIZE(@addr)
+ * @width: OCP data width
+ * @thread_cnt: number of threads
+ * @max_burst_len: maximum burst length in @width sized words (0 if unlimited)
+ * @user: initiators using this interface (see OCP_USER_* macros above)
+ * @flags: OCP interface flags (see OCPIF_* macros above)
+ *
+ * It may also be useful to add a tag_cnt field for OCP2.x devices.
+ *
+ * Parameter names beginning with an underscore are managed internally by
+ * the omap_hwmod code and should not be set during initialization.
+ */
+struct omap_hwmod_ocp_if {
+	struct omap_hwmod		*master;
+	struct omap_hwmod		*slave;
+	struct omap_hwmod_addr_space	*addr;
+	const char			*clkdev_dev_id;
+	const char			*clkdev_con_id;
+	struct clk			*_clk;
+	union {
+		struct omap_hwmod_omap2_firewall omap2;
+	}				fw;
+	u8				addr_cnt;
+	u8				width;
+	u8				thread_cnt;
+	u8				max_burst_len;
+	u8				user;
+	u8				flags;
+};
+
+
+/* Macros for use in struct omap_hwmod_sysconfig */
+
+/* Flags for use in omap_hwmod_sysconfig.idlemodes */
+#define MASTER_STANDBY_SHIFT	2
+#define SLAVE_IDLE_SHIFT	0
+#define SIDLE_FORCE		(HWMOD_IDLEMODE_FORCE << SLAVE_IDLE_SHIFT)
+#define SIDLE_NO		(HWMOD_IDLEMODE_NO << SLAVE_IDLE_SHIFT)
+#define SIDLE_SMART		(HWMOD_IDLEMODE_SMART << SLAVE_IDLE_SHIFT)
+#define MSTANDBY_FORCE		(HWMOD_IDLEMODE_FORCE << MASTER_STANDBY_SHIFT)
+#define MSTANDBY_NO		(HWMOD_IDLEMODE_NO << MASTER_STANDBY_SHIFT)
+#define MSTANDBY_SMART		(HWMOD_IDLEMODE_SMART << MASTER_STANDBY_SHIFT)
+
+/* omap_hwmod_sysconfig.sysc_flags capability flags */
+#define SYSC_HAS_AUTOIDLE	(1 << 0)
+#define SYSC_HAS_SOFTRESET	(1 << 1)
+#define SYSC_HAS_ENAWAKEUP	(1 << 2)
+#define SYSC_HAS_EMUFREE	(1 << 3)
+#define SYSC_HAS_CLOCKACTIVITY	(1 << 4)
+#define SYSC_HAS_SIDLEMODE	(1 << 5)
+#define SYSC_HAS_MIDLEMODE	(1 << 6)
+#define SYSS_MISSING		(1 << 7)
+
+/* omap_hwmod_sysconfig.clockact flags */
+#define CLOCKACT_TEST_BOTH	0x0
+#define CLOCKACT_TEST_MAIN	0x1
+#define CLOCKACT_TEST_ICLK	0x2
+#define CLOCKACT_TEST_NONE	0x3
+
+/**
+ * struct omap_hwmod_sysconfig - hwmod OCP_SYSCONFIG/OCP_SYSSTATUS data
+ * @rev_offs: IP block revision register offset (from module base addr)
+ * @sysc_offs: OCP_SYSCONFIG register offset (from module base addr)
+ * @syss_offs: OCP_SYSSTATUS register offset (from module base addr)
+ * @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART}
+ * @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported
+ * @clockact: the default value of the module CLOCKACTIVITY bits
+ *
+ * @clockact describes to the module which clocks are likely to be
+ * disabled when the PRCM issues its idle request to the module.  Some
+ * modules have separate clockdomains for the interface clock and main
+ * functional clock, and can check whether they should acknowledge the
+ * idle request based on the internal module functionality that has
+ * been associated with the clocks marked in @clockact.  This field is
+ * only used if HWMOD_SET_DEFAULT_CLOCKACT is set (see below)
+ *
+ */
+struct omap_hwmod_sysconfig {
+	u16 rev_offs;
+	u16 sysc_offs;
+	u16 syss_offs;
+	u8 idlemodes;
+	u8 sysc_flags;
+	u8 clockact;
+};
+
+/**
+ * struct omap_hwmod_omap2_prcm - OMAP2/3-specific PRCM data
+ * @module_offs: PRCM submodule offset from the start of the PRM/CM
+ * @prcm_reg_id: PRCM register ID (e.g., 3 for CM_AUTOIDLE3)
+ * @module_bit: register bit shift for AUTOIDLE, WKST, WKEN, GRPSEL regs
+ * @idlest_reg_id: IDLEST register ID (e.g., 3 for CM_IDLEST3)
+ * @idlest_idle_bit: register bit shift for CM_IDLEST slave idle bit
+ * @idlest_stdby_bit: register bit shift for CM_IDLEST master standby bit
+ *
+ * @prcm_reg_id and @module_bit are specific to the AUTOIDLE, WKST,
+ * WKEN, GRPSEL registers.  In an ideal world, no extra information
+ * would be needed for IDLEST information, but alas, there are some
+ * exceptions, so @idlest_reg_id, @idlest_idle_bit, @idlest_stdby_bit
+ * are needed for the IDLEST registers (c.f. 2430 I2CHS, 3430 USBHOST)
+ */
+struct omap_hwmod_omap2_prcm {
+	s16 module_offs;
+	u8 prcm_reg_id;
+	u8 module_bit;
+	u8 idlest_reg_id;
+	u8 idlest_idle_bit;
+	u8 idlest_stdby_bit;
+};
+
+
+/**
+ * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
+ * @module_offs: PRCM submodule offset from the start of the PRM/CM1/CM2
+ * @device_offs: device register offset from @module_offs
+ * @submodule_wkdep_bit: bit shift of the WKDEP range
+ */
+struct omap_hwmod_omap4_prcm {
+	u32 module_offs;
+	u16 device_offs;
+	u8 submodule_wkdep_bit;
+};
+
+
+/*
+ * omap_hwmod.flags definitions
+ *
+ * HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out
+ *     of idle, rather than relying on module smart-idle
+ * HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out
+ *     of standby, rather than relying on module smart-standby
+ * HWMOD_INIT_NO_RESET: don't reset this module at boot - important for
+ *     SDRAM controller, etc.
+ * HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM
+ *     controller, etc.
+ * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup
+ */
+#define HWMOD_SWSUP_SIDLE			(1 << 0)
+#define HWMOD_SWSUP_MSTANDBY			(1 << 1)
+#define HWMOD_INIT_NO_RESET			(1 << 2)
+#define HWMOD_INIT_NO_IDLE			(1 << 3)
+#define HWMOD_SET_DEFAULT_CLOCKACT		(1 << 4)
+
+/*
+ * omap_hwmod._int_flags definitions
+ * These are for internal use only and are managed by the omap_hwmod code.
+ *
+ * _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module
+ * _HWMOD_WAKEUP_ENABLED: set when the omap_hwmod code has enabled ENAWAKEUP
+ * _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached
+ */
+#define _HWMOD_NO_MPU_PORT			(1 << 0)
+#define _HWMOD_WAKEUP_ENABLED			(1 << 1)
+#define _HWMOD_SYSCONFIG_LOADED			(1 << 2)
+
+/*
+ * omap_hwmod._state definitions
+ *
+ * INITIALIZED: reset (optionally), initialized, enabled, disabled
+ *              (optionally)
+ *
+ *
+ */
+#define _HWMOD_STATE_UNKNOWN			0
+#define _HWMOD_STATE_REGISTERED			1
+#define _HWMOD_STATE_CLKS_INITED		2
+#define _HWMOD_STATE_INITIALIZED		3
+#define _HWMOD_STATE_ENABLED			4
+#define _HWMOD_STATE_IDLE			5
+#define _HWMOD_STATE_DISABLED			6
+
+/**
+ * struct omap_hwmod - integration data for OMAP hardware "modules" (IP blocks)
+ * @name: name of the hwmod
+ * @od: struct omap_device currently associated with this hwmod (internal use)
+ * @mpu_irqs: ptr to an array of MPU IRQs (see also mpu_irqs_cnt)
+ * @sdma_chs: ptr to an array of SDMA channel IDs (see also sdma_chs_cnt)
+ * @prcm: PRCM data pertaining to this hwmod
+ * @clkdev_dev_id: main clock: clkdev dev_id string
+ * @clkdev_con_id: main clock: clkdev con_id string
+ * @_clk: pointer to the main struct clk (filled in at runtime)
+ * @opt_clks: other device clocks that drivers can request (0..*)
+ * @masters: ptr to array of OCP ifs that this hwmod can initiate on
+ * @slaves: ptr to array of OCP ifs that this hwmod can respond on
+ * @sysconfig: device SYSCONFIG/SYSSTATUS register data
+ * @dev_attr: arbitrary device attributes that can be passed to the driver
+ * @_sysc_cache: internal-use hwmod flags
+ * @_rt_va: cached register target start address (internal use)
+ * @_mpu_port_index: cached MPU register target slave ID (internal use)
+ * @msuspendmux_reg_id: CONTROL_MSUSPENDMUX register ID (1-6)
+ * @msuspendmux_shift: CONTROL_MSUSPENDMUX register bit shift
+ * @mpu_irqs_cnt: number of @mpu_irqs
+ * @sdma_chs_cnt: number of @sdma_chs
+ * @opt_clks_cnt: number of @opt_clks
+ * @master_cnt: number of @master entries
+ * @slaves_cnt: number of @slave entries
+ * @response_lat: device OCP response latency (in interface clock cycles)
+ * @_int_flags: internal-use hwmod flags
+ * @_state: internal-use hwmod state
+ * @flags: hwmod flags (documented below)
+ * @omap_chip: OMAP chips this hwmod is present on
+ * @node: list node for hwmod list (internal use)
+ *
+ * @clkdev_dev_id, @clkdev_con_id, and @clk all refer to this module's "main
+ * clock," which for our purposes is defined as "the functional clock needed
+ * for register accesses to complete."  Modules may not have a main clock if
+ * the interface clock also serves as a main clock.
+ *
+ * Parameter names beginning with an underscore are managed internally by
+ * the omap_hwmod code and should not be set during initialization.
+ */
+struct omap_hwmod {
+	const char			*name;
+	struct omap_device		*od;
+	u8				*mpu_irqs;
+	struct omap_hwmod_dma_info	*sdma_chs;
+	union {
+		struct omap_hwmod_omap2_prcm omap2;
+		struct omap_hwmod_omap4_prcm omap4;
+	}				prcm;
+	const char			*clkdev_dev_id;
+	const char			*clkdev_con_id;
+	struct clk			*_clk;
+	struct omap_hwmod_opt_clk	*opt_clks;
+	struct omap_hwmod_ocp_if	**masters; /* connect to *_IA */
+	struct omap_hwmod_ocp_if	**slaves;  /* connect to *_TA */
+	struct omap_hwmod_sysconfig	*sysconfig;
+	void				*dev_attr;
+	u32				_sysc_cache;
+	void __iomem			*_rt_va;
+	struct list_head		node;
+	u16				flags;
+	u8				_mpu_port_index;
+	u8				msuspendmux_reg_id;
+	u8				msuspendmux_shift;
+	u8				response_lat;
+	u8				mpu_irqs_cnt;
+	u8				sdma_chs_cnt;
+	u8				opt_clks_cnt;
+	u8				masters_cnt;
+	u8				slaves_cnt;
+	u8				hwmods_cnt;
+	u8				_int_flags;
+	u8				_state;
+	const struct omap_chip_id	omap_chip;
+};
+
+int omap_hwmod_init(struct omap_hwmod **ohs);
+int omap_hwmod_register(struct omap_hwmod *oh);
+int omap_hwmod_unregister(struct omap_hwmod *oh);
+struct omap_hwmod *omap_hwmod_lookup(const char *name);
+int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh));
+int omap_hwmod_late_init(void);
+
+int omap_hwmod_enable(struct omap_hwmod *oh);
+int omap_hwmod_idle(struct omap_hwmod *oh);
+int omap_hwmod_shutdown(struct omap_hwmod *oh);
+
+int omap_hwmod_enable_clocks(struct omap_hwmod *oh);
+int omap_hwmod_disable_clocks(struct omap_hwmod *oh);
+
+int omap_hwmod_reset(struct omap_hwmod *oh);
+void omap_hwmod_ocp_barrier(struct omap_hwmod *oh);
+
+void omap_hwmod_writel(u32 v, struct omap_hwmod *oh, u16 reg_offs);
+u32 omap_hwmod_readl(struct omap_hwmod *oh, u16 reg_offs);
+
+int omap_hwmod_count_resources(struct omap_hwmod *oh);
+int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
+
+struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh);
+
+int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh,
+				 struct omap_hwmod *init_oh);
+int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh,
+				 struct omap_hwmod *init_oh);
+
+int omap_hwmod_set_clockact_both(struct omap_hwmod *oh);
+int omap_hwmod_set_clockact_main(struct omap_hwmod *oh);
+int omap_hwmod_set_clockact_iclk(struct omap_hwmod *oh);
+int omap_hwmod_set_clockact_none(struct omap_hwmod *oh);
+
+int omap_hwmod_enable_wakeup(struct omap_hwmod *oh);
+int omap_hwmod_disable_wakeup(struct omap_hwmod *oh);
+
+#endif
-- 
cgit v1.2.3


From 02bfc030e4417003b7a94393102c92e39b2dfa65 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Thu, 3 Sep 2009 20:14:05 +0300
Subject: OMAP: omap_hwmod: call omap_hwmod init at boot; create interconnects

Connect the omap_hwmod code to the kernel boot.  Create some basic
interconnect and device structures for OMAP2/3 chips.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/io.c              |  17 +++-
 arch/arm/mach-omap2/omap_hwmod.c      |   3 +-
 arch/arm/mach-omap2/omap_hwmod_2420.h | 141 ++++++++++++++++++++++++++++
 arch/arm/mach-omap2/omap_hwmod_2430.h | 143 +++++++++++++++++++++++++++++
 arch/arm/mach-omap2/omap_hwmod_34xx.h | 168 ++++++++++++++++++++++++++++++++++
 5 files changed, 469 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/mach-omap2/omap_hwmod_2420.h
 create mode 100644 arch/arm/mach-omap2/omap_hwmod_2430.h
 create mode 100644 arch/arm/mach-omap2/omap_hwmod_34xx.h

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 470b1d10c4e..7574b6f20e8 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -39,12 +39,16 @@
 
 #include <mach/omap-pm.h>
 #include <mach/powerdomain.h>
-
 #include "powerdomains.h"
 
 #include <mach/clockdomain.h>
 #include "clockdomains.h"
 #endif
+#include <mach/omap_hwmod.h>
+#include "omap_hwmod_2420.h"
+#include "omap_hwmod_2430.h"
+#include "omap_hwmod_34xx.h"
+
 /*
  * The machine specific code may provide the extra mapping besides the
  * default mapping provided here.
@@ -281,6 +285,16 @@ static int __init _omap2_init_reprogram_sdrc(void)
 void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 				 struct omap_sdrc_params *sdrc_cs1)
 {
+	struct omap_hwmod **hwmods = NULL;
+
+	if (cpu_is_omap2420())
+		hwmods = omap2420_hwmods;
+	else if (cpu_is_omap2430())
+		hwmods = omap2430_hwmods;
+	else if (cpu_is_omap34xx())
+		hwmods = omap34xx_hwmods;
+
+	omap_hwmod_init(hwmods);
 	omap2_mux_init();
 #ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */
 	/* The OPP tables have to be registered before a clk init */
@@ -289,6 +303,7 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 	clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
 	omap2_clk_init();
 	omap_serial_early_init();
+	omap_hwmod_late_init();
 	omap_pm_if_init();
 	omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
 	_omap2_init_reprogram_sdrc();
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 3b10ad6c47d..d2e0f1c9596 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -765,8 +765,7 @@ static int _reset(struct omap_hwmod *oh)
 		WARN(1, "omap_hwmod: %s: failed to reset in %d usec\n",
 		     oh->name, MAX_MODULE_RESET_WAIT);
 	else
-		pr_debug("omap_hwmod: %s: reset in %d usec\n", oh->name,
-			 MAX_MODULE_RESET_WAIT);
+		pr_debug("omap_hwmod: %s: reset in %d usec\n", oh->name, c);
 
 	/*
 	 * XXX add _HWMOD_STATE_WEDGED for modules that don't come back from
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420.h b/arch/arm/mach-omap2/omap_hwmod_2420.h
new file mode 100644
index 00000000000..767e4965ac4
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod_2420.h
@@ -0,0 +1,141 @@
+/*
+ * omap_hwmod_2420.h - hardware modules present on the OMAP2420 chips
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * XXX handle crossbar/shared link difference for L3?
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD2420_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD2420_H
+
+#ifdef CONFIG_ARCH_OMAP2420
+
+#include <mach/omap_hwmod.h>
+#include <mach/irqs.h>
+#include <mach/cpu.h>
+#include <mach/dma.h>
+
+#include "prm-regbits-24xx.h"
+
+static struct omap_hwmod omap2420_mpu_hwmod;
+static struct omap_hwmod omap2420_l3_hwmod;
+static struct omap_hwmod omap2420_l4_core_hwmod;
+
+/* L3 -> L4_CORE interface */
+static struct omap_hwmod_ocp_if omap2420_l3__l4_core = {
+	.master	= &omap2420_l3_hwmod,
+	.slave	= &omap2420_l4_core_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* MPU -> L3 interface */
+static struct omap_hwmod_ocp_if omap2420_mpu__l3 = {
+	.master = &omap2420_mpu_hwmod,
+	.slave	= &omap2420_l3_hwmod,
+	.user	= OCP_USER_MPU,
+};
+
+/* Slave interfaces on the L3 interconnect */
+static struct omap_hwmod_ocp_if *omap2420_l3_slaves[] = {
+	&omap2420_mpu__l3,
+};
+
+/* Master interfaces on the L3 interconnect */
+static struct omap_hwmod_ocp_if *omap2420_l3_masters[] = {
+	&omap2420_l3__l4_core,
+};
+
+/* L3 */
+static struct omap_hwmod omap2420_l3_hwmod = {
+	.name		= "l3_hwmod",
+	.masters	= omap2420_l3_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2420_l3_masters),
+	.slaves		= omap2420_l3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_l3_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
+};
+
+static struct omap_hwmod omap2420_l4_wkup_hwmod;
+
+/* L4_CORE -> L4_WKUP interface */
+static struct omap_hwmod_ocp_if omap2420_l4_core__l4_wkup = {
+	.master	= &omap2420_l4_core_hwmod,
+	.slave	= &omap2420_l4_wkup_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* Slave interfaces on the L4_CORE interconnect */
+static struct omap_hwmod_ocp_if *omap2420_l4_core_slaves[] = {
+	&omap2420_l3__l4_core,
+};
+
+/* Master interfaces on the L4_CORE interconnect */
+static struct omap_hwmod_ocp_if *omap2420_l4_core_masters[] = {
+	&omap2420_l4_core__l4_wkup,
+};
+
+/* L4 CORE */
+static struct omap_hwmod omap2420_l4_core_hwmod = {
+	.name		= "l4_core_hwmod",
+	.masters	= omap2420_l4_core_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2420_l4_core_masters),
+	.slaves		= omap2420_l4_core_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_l4_core_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
+};
+
+/* Slave interfaces on the L4_WKUP interconnect */
+static struct omap_hwmod_ocp_if *omap2420_l4_wkup_slaves[] = {
+	&omap2420_l4_core__l4_wkup,
+};
+
+/* Master interfaces on the L4_WKUP interconnect */
+static struct omap_hwmod_ocp_if *omap2420_l4_wkup_masters[] = {
+};
+
+/* L4 WKUP */
+static struct omap_hwmod omap2420_l4_wkup_hwmod = {
+	.name		= "l4_wkup_hwmod",
+	.masters	= omap2420_l4_wkup_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2420_l4_wkup_masters),
+	.slaves		= omap2420_l4_wkup_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_l4_wkup_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
+};
+
+/* Master interfaces on the MPU device */
+static struct omap_hwmod_ocp_if *omap2420_mpu_masters[] = {
+	&omap2420_mpu__l3,
+};
+
+/* MPU */
+static struct omap_hwmod omap2420_mpu_hwmod = {
+	.name		= "mpu_hwmod",
+	.clkdev_dev_id	= NULL,
+	.clkdev_con_id	= "mpu_ck",
+	.masters	= omap2420_mpu_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2420_mpu_masters),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+static __initdata struct omap_hwmod *omap2420_hwmods[] = {
+	&omap2420_l3_hwmod,
+	&omap2420_l4_core_hwmod,
+	&omap2420_l4_wkup_hwmod,
+	&omap2420_mpu_hwmod,
+	NULL,
+};
+
+#else
+# define omap2420_hwmods		0
+#endif
+
+#endif
+
+
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430.h b/arch/arm/mach-omap2/omap_hwmod_2430.h
new file mode 100644
index 00000000000..a412be6420e
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod_2430.h
@@ -0,0 +1,143 @@
+/*
+ * omap_hwmod_2430.h - hardware modules present on the OMAP2430 chips
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * XXX handle crossbar/shared link difference for L3?
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD2430_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD2430_H
+
+#ifdef CONFIG_ARCH_OMAP2430
+
+#include <mach/omap_hwmod.h>
+#include <mach/irqs.h>
+#include <mach/cpu.h>
+#include <mach/dma.h>
+
+#include "prm-regbits-24xx.h"
+
+static struct omap_hwmod omap2430_mpu_hwmod;
+static struct omap_hwmod omap2430_l3_hwmod;
+static struct omap_hwmod omap2430_l4_core_hwmod;
+
+/* L3 -> L4_CORE interface */
+static struct omap_hwmod_ocp_if omap2430_l3__l4_core = {
+	.master	= &omap2430_l3_hwmod,
+	.slave	= &omap2430_l4_core_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* MPU -> L3 interface */
+static struct omap_hwmod_ocp_if omap2430_mpu__l3 = {
+	.master = &omap2430_mpu_hwmod,
+	.slave	= &omap2430_l3_hwmod,
+	.user	= OCP_USER_MPU,
+};
+
+/* Slave interfaces on the L3 interconnect */
+static struct omap_hwmod_ocp_if *omap2430_l3_slaves[] = {
+	&omap2430_mpu__l3,
+};
+
+/* Master interfaces on the L3 interconnect */
+static struct omap_hwmod_ocp_if *omap2430_l3_masters[] = {
+	&omap2430_l3__l4_core,
+};
+
+/* L3 */
+static struct omap_hwmod omap2430_l3_hwmod = {
+	.name		= "l3_hwmod",
+	.masters	= omap2430_l3_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2430_l3_masters),
+	.slaves		= omap2430_l3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_l3_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+};
+
+static struct omap_hwmod omap2430_l4_wkup_hwmod;
+static struct omap_hwmod omap2430_mmc1_hwmod;
+static struct omap_hwmod omap2430_mmc2_hwmod;
+
+/* L4_CORE -> L4_WKUP interface */
+static struct omap_hwmod_ocp_if omap2430_l4_core__l4_wkup = {
+	.master	= &omap2430_l4_core_hwmod,
+	.slave	= &omap2430_l4_wkup_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* Slave interfaces on the L4_CORE interconnect */
+static struct omap_hwmod_ocp_if *omap2430_l4_core_slaves[] = {
+	&omap2430_l3__l4_core,
+};
+
+/* Master interfaces on the L4_CORE interconnect */
+static struct omap_hwmod_ocp_if *omap2430_l4_core_masters[] = {
+	&omap2430_l4_core__l4_wkup,
+};
+
+/* L4 CORE */
+static struct omap_hwmod omap2430_l4_core_hwmod = {
+	.name		= "l4_core_hwmod",
+	.masters	= omap2430_l4_core_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2430_l4_core_masters),
+	.slaves		= omap2430_l4_core_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_l4_core_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+};
+
+/* Slave interfaces on the L4_WKUP interconnect */
+static struct omap_hwmod_ocp_if *omap2430_l4_wkup_slaves[] = {
+	&omap2430_l4_core__l4_wkup,
+};
+
+/* Master interfaces on the L4_WKUP interconnect */
+static struct omap_hwmod_ocp_if *omap2430_l4_wkup_masters[] = {
+};
+
+/* L4 WKUP */
+static struct omap_hwmod omap2430_l4_wkup_hwmod = {
+	.name		= "l4_wkup_hwmod",
+	.masters	= omap2430_l4_wkup_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2430_l4_wkup_masters),
+	.slaves		= omap2430_l4_wkup_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_l4_wkup_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+};
+
+/* Master interfaces on the MPU device */
+static struct omap_hwmod_ocp_if *omap2430_mpu_masters[] = {
+	&omap2430_mpu__l3,
+};
+
+/* MPU */
+static struct omap_hwmod omap2430_mpu_hwmod = {
+	.name		= "mpu_hwmod",
+	.clkdev_dev_id	= NULL,
+	.clkdev_con_id	= "mpu_ck",
+	.masters	= omap2430_mpu_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2430_mpu_masters),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
+static __initdata struct omap_hwmod *omap2430_hwmods[] = {
+	&omap2430_l3_hwmod,
+	&omap2430_l4_core_hwmod,
+	&omap2430_l4_wkup_hwmod,
+	&omap2430_mpu_hwmod,
+	NULL,
+};
+
+#else
+# define omap2430_hwmods		0
+#endif
+
+#endif
+
+
diff --git a/arch/arm/mach-omap2/omap_hwmod_34xx.h b/arch/arm/mach-omap2/omap_hwmod_34xx.h
new file mode 100644
index 00000000000..1e069f83157
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod_34xx.h
@@ -0,0 +1,168 @@
+/*
+ * omap_hwmod_34xx.h - hardware modules present on the OMAP34xx chips
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD34XX_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD34XX_H
+
+#ifdef CONFIG_ARCH_OMAP34XX
+
+#include <mach/omap_hwmod.h>
+#include <mach/irqs.h>
+#include <mach/cpu.h>
+#include <mach/dma.h>
+
+#include "prm-regbits-34xx.h"
+
+static struct omap_hwmod omap34xx_mpu_hwmod;
+static struct omap_hwmod omap34xx_l3_hwmod;
+static struct omap_hwmod omap34xx_l4_core_hwmod;
+static struct omap_hwmod omap34xx_l4_per_hwmod;
+
+/* L3 -> L4_CORE interface */
+static struct omap_hwmod_ocp_if omap34xx_l3__l4_core = {
+	.master	= &omap34xx_l3_hwmod,
+	.slave	= &omap34xx_l4_core_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L3 -> L4_PER interface */
+static struct omap_hwmod_ocp_if omap34xx_l3__l4_per = {
+	.master = &omap34xx_l3_hwmod,
+	.slave	= &omap34xx_l4_per_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* MPU -> L3 interface */
+static struct omap_hwmod_ocp_if omap34xx_mpu__l3 = {
+	.master = &omap34xx_mpu_hwmod,
+	.slave	= &omap34xx_l3_hwmod,
+	.user	= OCP_USER_MPU,
+};
+
+/* Slave interfaces on the L3 interconnect */
+static struct omap_hwmod_ocp_if *omap34xx_l3_slaves[] = {
+	&omap34xx_mpu__l3,
+};
+
+/* Master interfaces on the L3 interconnect */
+static struct omap_hwmod_ocp_if *omap34xx_l3_masters[] = {
+	&omap34xx_l3__l4_core,
+	&omap34xx_l3__l4_per,
+};
+
+/* L3 */
+static struct omap_hwmod omap34xx_l3_hwmod = {
+	.name		= "l3_hwmod",
+	.masters	= omap34xx_l3_masters,
+	.masters_cnt	= ARRAY_SIZE(omap34xx_l3_masters),
+	.slaves		= omap34xx_l3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap34xx_l3_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+};
+
+static struct omap_hwmod omap34xx_l4_wkup_hwmod;
+
+/* L4_CORE -> L4_WKUP interface */
+static struct omap_hwmod_ocp_if omap34xx_l4_core__l4_wkup = {
+	.master	= &omap34xx_l4_core_hwmod,
+	.slave	= &omap34xx_l4_wkup_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* Slave interfaces on the L4_CORE interconnect */
+static struct omap_hwmod_ocp_if *omap34xx_l4_core_slaves[] = {
+	&omap34xx_l3__l4_core,
+};
+
+/* Master interfaces on the L4_CORE interconnect */
+static struct omap_hwmod_ocp_if *omap34xx_l4_core_masters[] = {
+	&omap34xx_l4_core__l4_wkup,
+};
+
+/* L4 CORE */
+static struct omap_hwmod omap34xx_l4_core_hwmod = {
+	.name		= "l4_core_hwmod",
+	.masters	= omap34xx_l4_core_masters,
+	.masters_cnt	= ARRAY_SIZE(omap34xx_l4_core_masters),
+	.slaves		= omap34xx_l4_core_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap34xx_l4_core_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+};
+
+/* Slave interfaces on the L4_PER interconnect */
+static struct omap_hwmod_ocp_if *omap34xx_l4_per_slaves[] = {
+	&omap34xx_l3__l4_per,
+};
+
+/* Master interfaces on the L4_PER interconnect */
+static struct omap_hwmod_ocp_if *omap34xx_l4_per_masters[] = {
+};
+
+/* L4 PER */
+static struct omap_hwmod omap34xx_l4_per_hwmod = {
+	.name		= "l4_per_hwmod",
+	.masters	= omap34xx_l4_per_masters,
+	.masters_cnt	= ARRAY_SIZE(omap34xx_l4_per_masters),
+	.slaves		= omap34xx_l4_per_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap34xx_l4_per_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+};
+
+/* Slave interfaces on the L4_WKUP interconnect */
+static struct omap_hwmod_ocp_if *omap34xx_l4_wkup_slaves[] = {
+	&omap34xx_l4_core__l4_wkup,
+};
+
+/* Master interfaces on the L4_WKUP interconnect */
+static struct omap_hwmod_ocp_if *omap34xx_l4_wkup_masters[] = {
+};
+
+/* L4 WKUP */
+static struct omap_hwmod omap34xx_l4_wkup_hwmod = {
+	.name		= "l4_wkup_hwmod",
+	.masters	= omap34xx_l4_wkup_masters,
+	.masters_cnt	= ARRAY_SIZE(omap34xx_l4_wkup_masters),
+	.slaves		= omap34xx_l4_wkup_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap34xx_l4_wkup_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+};
+
+/* Master interfaces on the MPU device */
+static struct omap_hwmod_ocp_if *omap34xx_mpu_masters[] = {
+	&omap34xx_mpu__l3,
+};
+
+/* MPU */
+static struct omap_hwmod omap34xx_mpu_hwmod = {
+	.name		= "mpu_hwmod",
+	.clkdev_dev_id	= NULL,
+	.clkdev_con_id	= "arm_fck",
+	.masters	= omap34xx_mpu_masters,
+	.masters_cnt	= ARRAY_SIZE(omap34xx_mpu_masters),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static __initdata struct omap_hwmod *omap34xx_hwmods[] = {
+	&omap34xx_l3_hwmod,
+	&omap34xx_l4_core_hwmod,
+	&omap34xx_l4_per_hwmod,
+	&omap34xx_l4_wkup_hwmod,
+	&omap34xx_mpu_hwmod,
+	NULL,
+};
+
+#else
+# define omap34xx_hwmods		0
+#endif
+
+#endif
+
+
-- 
cgit v1.2.3


From b04b65ab5b4fc86af073424af6295be4e067adf3 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Thu, 3 Sep 2009 20:14:05 +0300
Subject: OMAP2/3/4 core: create omap_device layer

The omap_device code provides a mapping of omap_hwmod structures into
the platform_device system, and includes some details on external
(board-level) integration.  This allows drivers to enable, idle, and
shutdown on-chip device resources, including clocks, regulators, etc.
The resources enabled and idled are dependent on the device's maximum
wakeup latency constraint (if present).

At the moment, omap_device functions are intended to be called from
platform_data function pointers.  Ideally in the future these
functions will be called from either subarchitecture-specific
platform_data activate, deactivate functions, or via an custom
bus/device type for OMAP.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Vikram Pandita <vikram.pandita@ti.com>
Cc: Sakari Poussa <sakari.poussa@nokia.com>
Cc: Anand Sawant <sawant@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Eric Thomas <ethomas@ti.com>
Cc: Richard Woodruff <r-woodruff2@ti.com>
---
 arch/arm/plat-omap/Makefile                   |   4 +
 arch/arm/plat-omap/include/mach/omap_device.h | 141 ++++++
 arch/arm/plat-omap/omap_device.c              | 687 ++++++++++++++++++++++++++
 3 files changed, 832 insertions(+)
 create mode 100644 arch/arm/plat-omap/include/mach/omap_device.h
 create mode 100644 arch/arm/plat-omap/omap_device.c

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 5e10d0a2eb8..98f01910c2c 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -12,6 +12,10 @@ obj-  :=
 # OCPI interconnect support for 1710, 1610 and 5912
 obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
 
+# omap_device support (OMAP2+ only at the moment)
+obj-$(CONFIG_ARCH_OMAP2) += omap_device.o
+obj-$(CONFIG_ARCH_OMAP3) += omap_device.o
+
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 obj-$(CONFIG_OMAP_IOMMU) += iommu.o iovmm.o
 obj-$(CONFIG_OMAP_IOMMU_DEBUG) += iommu-debug.o
diff --git a/arch/arm/plat-omap/include/mach/omap_device.h b/arch/arm/plat-omap/include/mach/omap_device.h
new file mode 100644
index 00000000000..bd0e136db33
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap_device.h
@@ -0,0 +1,141 @@
+/*
+ * omap_device headers
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * Developed in collaboration with (alphabetical order): Benoit
+ * Cousson, Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram
+ * Pandita, Sakari Poussa, Anand Sawant, Santosh Shilimkar, Richard
+ * Woodruff
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Eventually this type of functionality should either be
+ * a) implemented via arch-specific pointers in platform_device
+ * or
+ * b) implemented as a proper omap_bus/omap_device in Linux, no more
+ *    platform_device
+ *
+ * omap_device differs from omap_hwmod in that it includes external
+ * (e.g., board- and system-level) integration details.  omap_hwmod
+ * stores hardware data that is invariant for a given OMAP chip.
+ *
+ * To do:
+ * - GPIO integration
+ * - regulator integration
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <mach/omap_hwmod.h>
+
+/* omap_device._state values */
+#define OMAP_DEVICE_STATE_UNKNOWN	0
+#define OMAP_DEVICE_STATE_ENABLED	1
+#define OMAP_DEVICE_STATE_IDLE		2
+#define OMAP_DEVICE_STATE_SHUTDOWN	3
+
+/**
+ * struct omap_device - omap_device wrapper for platform_devices
+ * @pdev: platform_device
+ * @hwmods: (one .. many per omap_device)
+ * @hwmods_cnt: ARRAY_SIZE() of @hwmods
+ * @pm_lats: ptr to an omap_device_pm_latency table
+ * @pm_lats_cnt: ARRAY_SIZE() of what is passed to @pm_lats
+ * @pm_lat_level: array index of the last odpl entry executed - -1 if never
+ * @dev_wakeup_lat: dev wakeup latency in microseconds
+ * @_dev_wakeup_lat_limit: dev wakeup latency limit in usec - set by OMAP PM
+ * @_state: one of OMAP_DEVICE_STATE_* (see above)
+ * @flags: device flags
+ *
+ * Integrates omap_hwmod data into Linux platform_device.
+ *
+ * Field names beginning with underscores are for the internal use of
+ * the omap_device code.
+ *
+ */
+struct omap_device {
+	struct platform_device		pdev;
+	struct omap_hwmod		**hwmods;
+	struct omap_device_pm_latency	*pm_lats;
+	u32				dev_wakeup_lat;
+	u32				_dev_wakeup_lat_limit;
+	u8				pm_lats_cnt;
+	s8				pm_lat_level;
+	u8				hwmods_cnt;
+	u8				_state;
+};
+
+/* Device driver interface (call via platform_data fn ptrs) */
+
+int omap_device_enable(struct platform_device *pdev);
+int omap_device_idle(struct platform_device *pdev);
+int omap_device_shutdown(struct platform_device *pdev);
+
+/* Core code interface */
+
+int omap_device_count_resources(struct omap_device *od);
+int omap_device_fill_resources(struct omap_device *od, struct resource *res);
+
+struct omap_device *omap_device_build(const char *pdev_name, int pdev_id,
+				      struct omap_hwmod *oh, void *pdata,
+				      int pdata_len,
+				      struct omap_device_pm_latency *pm_lats,
+				      int pm_lats_cnt);
+
+struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
+					 struct omap_hwmod **oh, int oh_cnt,
+					 void *pdata, int pdata_len,
+					 struct omap_device_pm_latency *pm_lats,
+					 int pm_lats_cnt);
+
+int omap_device_register(struct omap_device *od);
+
+/* OMAP PM interface */
+int omap_device_align_pm_lat(struct platform_device *pdev,
+			     u32 new_wakeup_lat_limit);
+struct powerdomain *omap_device_get_pwrdm(struct omap_device *od);
+
+/* Other */
+
+int omap_device_idle_hwmods(struct omap_device *od);
+int omap_device_enable_hwmods(struct omap_device *od);
+
+int omap_device_disable_clocks(struct omap_device *od);
+int omap_device_enable_clocks(struct omap_device *od);
+
+
+/*
+ * Entries should be kept in latency order ascending
+ *
+ * deact_lat is the maximum number of microseconds required to complete
+ * deactivate_func() at the device's slowest OPP.
+ *
+ * act_lat is the maximum number of microseconds required to complete
+ * activate_func() at the device's slowest OPP.
+ *
+ * This will result in some suboptimal power management decisions at fast
+ * OPPs, but avoids having to recompute all device power management decisions
+ * if the system shifts from a fast OPP to a slow OPP (in order to meet
+ * latency requirements).
+ *
+ * XXX should deactivate_func/activate_func() take platform_device pointers
+ * rather than omap_device pointers?
+ */
+struct omap_device_pm_latency {
+	u32 deactivate_lat;
+	int (*deactivate_func)(struct omap_device *od);
+	u32 activate_lat;
+	int (*activate_func)(struct omap_device *od);
+};
+
+
+#endif
+
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
new file mode 100644
index 00000000000..2c409fc6dd2
--- /dev/null
+++ b/arch/arm/plat-omap/omap_device.c
@@ -0,0 +1,687 @@
+/*
+ * omap_device implementation
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * Developed in collaboration with (alphabetical order): Benoit
+ * Cousson, Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram
+ * Pandita, Sakari Poussa, Anand Sawant, Santosh Shilimkar, Richard
+ * Woodruff
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This code provides a consistent interface for OMAP device drivers
+ * to control power management and interconnect properties of their
+ * devices.
+ *
+ * In the medium- to long-term, this code should either be
+ * a) implemented via arch-specific pointers in platform_data
+ * or
+ * b) implemented as a proper omap_bus/omap_device in Linux, no more
+ *    platform_data func pointers
+ *
+ *
+ * Guidelines for usage by driver authors:
+ *
+ * 1. These functions are intended to be used by device drivers via
+ * function pointers in struct platform_data.  As an example,
+ * omap_device_enable() should be passed to the driver as
+ *
+ * struct foo_driver_platform_data {
+ * ...
+ *      int (*device_enable)(struct platform_device *pdev);
+ * ...
+ * }
+ *
+ * Note that the generic "device_enable" name is used, rather than
+ * "omap_device_enable".  This is so other architectures can pass in their
+ * own enable/disable functions here.
+ *
+ * This should be populated during device setup:
+ *
+ * ...
+ * pdata->device_enable = omap_device_enable;
+ * ...
+ *
+ * 2. Drivers should first check to ensure the function pointer is not null
+ * before calling it, as in:
+ *
+ * if (pdata->device_enable)
+ *     pdata->device_enable(pdev);
+ *
+ * This allows other architectures that don't use similar device_enable()/
+ * device_shutdown() functions to execute normally.
+ *
+ * ...
+ *
+ * Suggested usage by device drivers:
+ *
+ * During device initialization:
+ * device_enable()
+ *
+ * During device idle:
+ * (save remaining device context if necessary)
+ * device_idle();
+ *
+ * During device resume:
+ * device_enable();
+ * (restore context if necessary)
+ *
+ * During device shutdown:
+ * device_shutdown()
+ * (device must be reinitialized at this point to use it again)
+ *
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/omap_device.h>
+#include <mach/omap_hwmod.h>
+
+/* These parameters are passed to _omap_device_{de,}activate() */
+#define USE_WAKEUP_LAT			0
+#define IGNORE_WAKEUP_LAT		1
+
+/* XXX this should be moved into a separate file */
+#if defined(CONFIG_ARCH_OMAP2420)
+# define OMAP_32KSYNCT_BASE		0x48004000
+#elif defined(CONFIG_ARCH_OMAP2430)
+# define OMAP_32KSYNCT_BASE		0x49020000
+#elif defined(CONFIG_ARCH_OMAP3430)
+# define OMAP_32KSYNCT_BASE		0x48320000
+#else
+# error Unknown OMAP device
+#endif
+
+/* Private functions */
+
+/**
+ * _read_32ksynct - read the OMAP 32K sync timer
+ *
+ * Returns the current value of the 32KiHz synchronization counter.
+ * XXX this should be generalized to simply read the system clocksource.
+ * XXX this should be moved to a separate synctimer32k.c file
+ */
+static u32 _read_32ksynct(void)
+{
+	if (!cpu_class_is_omap2())
+		BUG();
+
+	return __raw_readl(OMAP2_IO_ADDRESS(OMAP_32KSYNCT_BASE + 0x010));
+}
+
+/**
+ * _omap_device_activate - increase device readiness
+ * @od: struct omap_device *
+ * @ignore_lat: increase to latency target (0) or full readiness (1)?
+ *
+ * Increase readiness of omap_device @od (thus decreasing device
+ * wakeup latency, but consuming more power).  If @ignore_lat is
+ * IGNORE_WAKEUP_LAT, make the omap_device fully active.  Otherwise,
+ * if @ignore_lat is USE_WAKEUP_LAT, and the device's maximum wakeup
+ * latency is greater than the requested maximum wakeup latency, step
+ * backwards in the omap_device_pm_latency table to ensure the
+ * device's maximum wakeup latency is less than or equal to the
+ * requested maximum wakeup latency.  Returns 0.
+ */
+static int _omap_device_activate(struct omap_device *od, u8 ignore_lat)
+{
+	u32 a, b;
+
+	pr_debug("omap_device: %s: activating\n", od->pdev.name);
+
+	while (od->pm_lat_level > 0) {
+		struct omap_device_pm_latency *odpl;
+		int act_lat = 0;
+
+		od->pm_lat_level--;
+
+		odpl = od->pm_lats + od->pm_lat_level;
+
+		if (!ignore_lat &&
+		    (od->dev_wakeup_lat <= od->_dev_wakeup_lat_limit))
+			break;
+
+		a = _read_32ksynct();
+
+		/* XXX check return code */
+		odpl->activate_func(od);
+
+		b = _read_32ksynct();
+
+		act_lat = (b - a) >> 15; /* 32KiHz cycles to microseconds */
+
+		pr_debug("omap_device: %s: pm_lat %d: activate: elapsed time "
+			 "%d usec\n", od->pdev.name, od->pm_lat_level, act_lat);
+
+		WARN(act_lat > odpl->activate_lat, "omap_device: %s.%d: "
+		     "activate step %d took longer than expected (%d > %d)\n",
+		     od->pdev.name, od->pdev.id, od->pm_lat_level,
+		     act_lat, odpl->activate_lat);
+
+		od->dev_wakeup_lat -= odpl->activate_lat;
+	}
+
+	return 0;
+}
+
+/**
+ * _omap_device_deactivate - decrease device readiness
+ * @od: struct omap_device *
+ * @ignore_lat: decrease to latency target (0) or full inactivity (1)?
+ *
+ * Decrease readiness of omap_device @od (thus increasing device
+ * wakeup latency, but conserving power).  If @ignore_lat is
+ * IGNORE_WAKEUP_LAT, make the omap_device fully inactive.  Otherwise,
+ * if @ignore_lat is USE_WAKEUP_LAT, and the device's maximum wakeup
+ * latency is less than the requested maximum wakeup latency, step
+ * forwards in the omap_device_pm_latency table to ensure the device's
+ * maximum wakeup latency is less than or equal to the requested
+ * maximum wakeup latency.  Returns 0.
+ */
+static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat)
+{
+	u32 a, b;
+
+	pr_debug("omap_device: %s: deactivating\n", od->pdev.name);
+
+	while (od->pm_lat_level < od->pm_lats_cnt) {
+		struct omap_device_pm_latency *odpl;
+		int deact_lat = 0;
+
+		odpl = od->pm_lats + od->pm_lat_level;
+
+		if (!ignore_lat &&
+		    ((od->dev_wakeup_lat + odpl->activate_lat) >
+		     od->_dev_wakeup_lat_limit))
+			break;
+
+		a = _read_32ksynct();
+
+		/* XXX check return code */
+		odpl->deactivate_func(od);
+
+		b = _read_32ksynct();
+
+		deact_lat = (b - a) >> 15; /* 32KiHz cycles to microseconds */
+
+		pr_debug("omap_device: %s: pm_lat %d: deactivate: elapsed time "
+			 "%d usec\n", od->pdev.name, od->pm_lat_level,
+			 deact_lat);
+
+		WARN(deact_lat > odpl->deactivate_lat, "omap_device: %s.%d: "
+		     "deactivate step %d took longer than expected (%d > %d)\n",
+		     od->pdev.name, od->pdev.id, od->pm_lat_level,
+		     deact_lat, odpl->deactivate_lat);
+
+		od->dev_wakeup_lat += odpl->activate_lat;
+
+		od->pm_lat_level++;
+	}
+
+	return 0;
+}
+
+static inline struct omap_device *_find_by_pdev(struct platform_device *pdev)
+{
+	return container_of(pdev, struct omap_device, pdev);
+}
+
+
+/* Public functions for use by core code */
+
+/**
+ * omap_device_count_resources - count number of struct resource entries needed
+ * @od: struct omap_device *
+ *
+ * Count the number of struct resource entries needed for this
+ * omap_device @od.  Used by omap_device_build_ss() to determine how
+ * much memory to allocate before calling
+ * omap_device_fill_resources().  Returns the count.
+ */
+int omap_device_count_resources(struct omap_device *od)
+{
+	struct omap_hwmod *oh;
+	int c = 0;
+	int i;
+
+	for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
+		c += omap_hwmod_count_resources(oh);
+
+	pr_debug("omap_device: %s: counted %d total resources across %d "
+		 "hwmods\n", od->pdev.name, c, od->hwmods_cnt);
+
+	return c;
+}
+
+/**
+ * omap_device_fill_resources - fill in array of struct resource
+ * @od: struct omap_device *
+ * @res: pointer to an array of struct resource to be filled in
+ *
+ * Populate one or more empty struct resource pointed to by @res with
+ * the resource data for this omap_device @od.  Used by
+ * omap_device_build_ss() after calling omap_device_count_resources().
+ * Ideally this function would not be needed at all.  If omap_device
+ * replaces platform_device, then we can specify our own
+ * get_resource()/ get_irq()/etc functions that use the underlying
+ * omap_hwmod information.  Or if platform_device is extended to use
+ * subarchitecture-specific function pointers, the various
+ * platform_device functions can simply call omap_device internal
+ * functions to get device resources.  Hacking around the existing
+ * platform_device code wastes memory.  Returns 0.
+ */
+int omap_device_fill_resources(struct omap_device *od, struct resource *res)
+{
+	struct omap_hwmod *oh;
+	int c = 0;
+	int i, r;
+
+	for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++) {
+		r = omap_hwmod_fill_resources(oh, res);
+		res += r;
+		c += r;
+	}
+
+	return 0;
+}
+
+/**
+ * omap_device_build - build and register an omap_device with one omap_hwmod
+ * @pdev_name: name of the platform_device driver to use
+ * @pdev_id: this platform_device's connection ID
+ * @oh: ptr to the single omap_hwmod that backs this omap_device
+ * @pdata: platform_data ptr to associate with the platform_device
+ * @pdata_len: amount of memory pointed to by @pdata
+ * @pm_lats: pointer to a omap_device_pm_latency array for this device
+ * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
+ *
+ * Convenience function for building and registering a single
+ * omap_device record, which in turn builds and registers a
+ * platform_device record.  See omap_device_build_ss() for more
+ * information.  Returns ERR_PTR(-EINVAL) if @oh is NULL; otherwise,
+ * passes along the return value of omap_device_build_ss().
+ */
+struct omap_device *omap_device_build(const char *pdev_name, int pdev_id,
+				      struct omap_hwmod *oh, void *pdata,
+				      int pdata_len,
+				      struct omap_device_pm_latency *pm_lats,
+				      int pm_lats_cnt)
+{
+	struct omap_hwmod *ohs[] = { oh };
+
+	if (!oh)
+		return ERR_PTR(-EINVAL);
+
+	return omap_device_build_ss(pdev_name, pdev_id, ohs, 1, pdata,
+				    pdata_len, pm_lats, pm_lats_cnt);
+}
+
+/**
+ * omap_device_build_ss - build and register an omap_device with multiple hwmods
+ * @pdev_name: name of the platform_device driver to use
+ * @pdev_id: this platform_device's connection ID
+ * @oh: ptr to the single omap_hwmod that backs this omap_device
+ * @pdata: platform_data ptr to associate with the platform_device
+ * @pdata_len: amount of memory pointed to by @pdata
+ * @pm_lats: pointer to a omap_device_pm_latency array for this device
+ * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
+ *
+ * Convenience function for building and registering an omap_device
+ * subsystem record.  Subsystem records consist of multiple
+ * omap_hwmods.  This function in turn builds and registers a
+ * platform_device record.  Returns an ERR_PTR() on error, or passes
+ * along the return value of omap_device_register().
+ */
+struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
+					 struct omap_hwmod **ohs, int oh_cnt,
+					 void *pdata, int pdata_len,
+					 struct omap_device_pm_latency *pm_lats,
+					 int pm_lats_cnt)
+{
+	int ret = -ENOMEM;
+	struct omap_device *od;
+	char *pdev_name2;
+	struct resource *res = NULL;
+	int res_count;
+	struct omap_hwmod **hwmods;
+
+	if (!ohs || oh_cnt == 0 || !pdev_name)
+		return ERR_PTR(-EINVAL);
+
+	if (!pdata && pdata_len > 0)
+		return ERR_PTR(-EINVAL);
+
+	pr_debug("omap_device: %s: building with %d hwmods\n", pdev_name,
+		 oh_cnt);
+
+	od = kzalloc(sizeof(struct omap_device), GFP_KERNEL);
+	if (!od)
+		return ERR_PTR(-ENOMEM);
+
+	od->hwmods_cnt = oh_cnt;
+
+	hwmods = kzalloc(sizeof(struct omap_hwmod *) * oh_cnt,
+			 GFP_KERNEL);
+	if (!hwmods)
+		goto odbs_exit1;
+
+	memcpy(hwmods, ohs, sizeof(struct omap_hwmod *) * oh_cnt);
+	od->hwmods = hwmods;
+
+	pdev_name2 = kzalloc(strlen(pdev_name) + 1, GFP_KERNEL);
+	if (!pdev_name2)
+		goto odbs_exit2;
+	strcpy(pdev_name2, pdev_name);
+
+	od->pdev.name = pdev_name2;
+	od->pdev.id = pdev_id;
+
+	res_count = omap_device_count_resources(od);
+	if (res_count > 0) {
+		res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL);
+		if (!res)
+			goto odbs_exit3;
+	}
+	omap_device_fill_resources(od, res);
+
+	od->pdev.num_resources = res_count;
+	od->pdev.resource = res;
+
+	platform_device_add_data(&od->pdev, pdata, pdata_len);
+
+	od->pm_lats = pm_lats;
+	od->pm_lats_cnt = pm_lats_cnt;
+
+	ret = omap_device_register(od);
+	if (ret)
+		goto odbs_exit4;
+
+	return od;
+
+odbs_exit4:
+	kfree(res);
+odbs_exit3:
+	kfree(pdev_name2);
+odbs_exit2:
+	kfree(hwmods);
+odbs_exit1:
+	kfree(od);
+
+	pr_err("omap_device: %s: build failed (%d)\n", pdev_name, ret);
+
+	return ERR_PTR(ret);
+}
+
+/**
+ * omap_device_register - register an omap_device with one omap_hwmod
+ * @od: struct omap_device * to register
+ *
+ * Register the omap_device structure.  This currently just calls
+ * platform_device_register() on the underlying platform_device.
+ * Returns the return value of platform_device_register().
+ */
+int omap_device_register(struct omap_device *od)
+{
+	pr_debug("omap_device: %s: registering\n", od->pdev.name);
+
+	return platform_device_register(&od->pdev);
+}
+
+
+/* Public functions for use by device drivers through struct platform_data */
+
+/**
+ * omap_device_enable - fully activate an omap_device
+ * @od: struct omap_device * to activate
+ *
+ * Do whatever is necessary for the hwmods underlying omap_device @od
+ * to be accessible and ready to operate.  This generally involves
+ * enabling clocks, setting SYSCONFIG registers; and in the future may
+ * involve remuxing pins.  Device drivers should call this function
+ * (through platform_data function pointers) where they would normally
+ * enable clocks, etc.  Returns -EINVAL if called when the omap_device
+ * is already enabled, or passes along the return value of
+ * _omap_device_activate().
+ */
+int omap_device_enable(struct platform_device *pdev)
+{
+	int ret;
+	struct omap_device *od;
+
+	od = _find_by_pdev(pdev);
+
+	if (od->_state == OMAP_DEVICE_STATE_ENABLED) {
+		WARN(1, "omap_device: %s.%d: omap_device_enable() called from "
+		     "invalid state\n", od->pdev.name, od->pdev.id);
+		return -EINVAL;
+	}
+
+	/* Enable everything if we're enabling this device from scratch */
+	if (od->_state == OMAP_DEVICE_STATE_UNKNOWN)
+		od->pm_lat_level = od->pm_lats_cnt;
+
+	ret = _omap_device_activate(od, IGNORE_WAKEUP_LAT);
+
+	od->dev_wakeup_lat = 0;
+	od->_dev_wakeup_lat_limit = INT_MAX;
+	od->_state = OMAP_DEVICE_STATE_ENABLED;
+
+	return ret;
+}
+
+/**
+ * omap_device_idle - idle an omap_device
+ * @od: struct omap_device * to idle
+ *
+ * Idle omap_device @od by calling as many .deactivate_func() entries
+ * in the omap_device's pm_lats table as is possible without exceeding
+ * the device's maximum wakeup latency limit, pm_lat_limit.  Device
+ * drivers should call this function (through platform_data function
+ * pointers) where they would normally disable clocks after operations
+ * complete, etc..  Returns -EINVAL if the omap_device is not
+ * currently enabled, or passes along the return value of
+ * _omap_device_deactivate().
+ */
+int omap_device_idle(struct platform_device *pdev)
+{
+	int ret;
+	struct omap_device *od;
+
+	od = _find_by_pdev(pdev);
+
+	if (od->_state != OMAP_DEVICE_STATE_ENABLED) {
+		WARN(1, "omap_device: %s.%d: omap_device_idle() called from "
+		     "invalid state\n", od->pdev.name, od->pdev.id);
+		return -EINVAL;
+	}
+
+	ret = _omap_device_deactivate(od, USE_WAKEUP_LAT);
+
+	od->_state = OMAP_DEVICE_STATE_IDLE;
+
+	return ret;
+}
+
+/**
+ * omap_device_shutdown - shut down an omap_device
+ * @od: struct omap_device * to shut down
+ *
+ * Shut down omap_device @od by calling all .deactivate_func() entries
+ * in the omap_device's pm_lats table and then shutting down all of
+ * the underlying omap_hwmods.  Used when a device is being "removed"
+ * or a device driver is being unloaded.  Returns -EINVAL if the
+ * omap_device is not currently enabled or idle, or passes along the
+ * return value of _omap_device_deactivate().
+ */
+int omap_device_shutdown(struct platform_device *pdev)
+{
+	int ret, i;
+	struct omap_device *od;
+	struct omap_hwmod *oh;
+
+	od = _find_by_pdev(pdev);
+
+	if (od->_state != OMAP_DEVICE_STATE_ENABLED &&
+	    od->_state != OMAP_DEVICE_STATE_IDLE) {
+		WARN(1, "omap_device: %s.%d: omap_device_shutdown() called "
+		     "from invalid state\n", od->pdev.name, od->pdev.id);
+		return -EINVAL;
+	}
+
+	ret = _omap_device_deactivate(od, IGNORE_WAKEUP_LAT);
+
+	for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
+		omap_hwmod_shutdown(oh);
+
+	od->_state = OMAP_DEVICE_STATE_SHUTDOWN;
+
+	return ret;
+}
+
+/**
+ * omap_device_align_pm_lat - activate/deactivate device to match wakeup lat lim
+ * @od: struct omap_device *
+ *
+ * When a device's maximum wakeup latency limit changes, call some of
+ * the .activate_func or .deactivate_func function pointers in the
+ * omap_device's pm_lats array to ensure that the device's maximum
+ * wakeup latency is less than or equal to the new latency limit.
+ * Intended to be called by OMAP PM code whenever a device's maximum
+ * wakeup latency limit changes (e.g., via
+ * omap_pm_set_dev_wakeup_lat()).  Returns 0 if nothing needs to be
+ * done (e.g., if the omap_device is not currently idle, or if the
+ * wakeup latency is already current with the new limit) or passes
+ * along the return value of _omap_device_deactivate() or
+ * _omap_device_activate().
+ */
+int omap_device_align_pm_lat(struct platform_device *pdev,
+			     u32 new_wakeup_lat_limit)
+{
+	int ret = -EINVAL;
+	struct omap_device *od;
+
+	od = _find_by_pdev(pdev);
+
+	if (new_wakeup_lat_limit == od->dev_wakeup_lat)
+		return 0;
+
+	od->_dev_wakeup_lat_limit = new_wakeup_lat_limit;
+
+	if (od->_state != OMAP_DEVICE_STATE_IDLE)
+		return 0;
+	else if (new_wakeup_lat_limit > od->dev_wakeup_lat)
+		ret = _omap_device_deactivate(od, USE_WAKEUP_LAT);
+	else if (new_wakeup_lat_limit < od->dev_wakeup_lat)
+		ret = _omap_device_activate(od, USE_WAKEUP_LAT);
+
+	return ret;
+}
+
+/**
+ * omap_device_get_pwrdm - return the powerdomain * associated with @od
+ * @od: struct omap_device *
+ *
+ * Return the powerdomain associated with the first underlying
+ * omap_hwmod for this omap_device.  Intended for use by core OMAP PM
+ * code.  Returns NULL on error or a struct powerdomain * upon
+ * success.
+ */
+struct powerdomain *omap_device_get_pwrdm(struct omap_device *od)
+{
+	/*
+	 * XXX Assumes that all omap_hwmod powerdomains are identical.
+	 * This may not necessarily be true.  There should be a sanity
+	 * check in here to WARN() if any difference appears.
+	 */
+	if (!od->hwmods_cnt)
+		return NULL;
+
+	return omap_hwmod_get_pwrdm(od->hwmods[0]);
+}
+
+/*
+ * Public functions intended for use in omap_device_pm_latency
+ * .activate_func and .deactivate_func function pointers
+ */
+
+/**
+ * omap_device_enable_hwmods - call omap_hwmod_enable() on all hwmods
+ * @od: struct omap_device *od
+ *
+ * Enable all underlying hwmods.  Returns 0.
+ */
+int omap_device_enable_hwmods(struct omap_device *od)
+{
+	struct omap_hwmod *oh;
+	int i;
+
+	for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
+		omap_hwmod_enable(oh);
+
+	/* XXX pass along return value here? */
+	return 0;
+}
+
+/**
+ * omap_device_idle_hwmods - call omap_hwmod_idle() on all hwmods
+ * @od: struct omap_device *od
+ *
+ * Idle all underlying hwmods.  Returns 0.
+ */
+int omap_device_idle_hwmods(struct omap_device *od)
+{
+	struct omap_hwmod *oh;
+	int i;
+
+	for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
+		omap_hwmod_idle(oh);
+
+	/* XXX pass along return value here? */
+	return 0;
+}
+
+/**
+ * omap_device_disable_clocks - disable all main and interface clocks
+ * @od: struct omap_device *od
+ *
+ * Disable the main functional clock and interface clock for all of the
+ * omap_hwmods associated with the omap_device.  Returns 0.
+ */
+int omap_device_disable_clocks(struct omap_device *od)
+{
+	struct omap_hwmod *oh;
+	int i;
+
+	for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
+		omap_hwmod_disable_clocks(oh);
+
+	/* XXX pass along return value here? */
+	return 0;
+}
+
+/**
+ * omap_device_enable_clocks - enable all main and interface clocks
+ * @od: struct omap_device *od
+ *
+ * Enable the main functional clock and interface clock for all of the
+ * omap_hwmods associated with the omap_device.  Returns 0.
+ */
+int omap_device_enable_clocks(struct omap_device *od)
+{
+	struct omap_hwmod *oh;
+	int i;
+
+	for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
+		omap_hwmod_enable_clocks(oh);
+
+	/* XXX pass along return value here? */
+	return 0;
+}
-- 
cgit v1.2.3


From ca4caa4e1d45f9542fa54263974d0ef637157b4a Mon Sep 17 00:00:00 2001
From: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Date: Thu, 3 Sep 2009 20:14:06 +0300
Subject: OMAP clock: use debugfs_remove_recursive() for rewinding

Rewinding each debugfs entries to unregister if an error happens.

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/plat-omap/clock.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index e8c327a45a5..bf880e966d3 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -488,7 +488,7 @@ static int __init clk_debugfs_init(void)
 	}
 	return 0;
 err_out:
-	debugfs_remove(clk_debugfs_root); /* REVISIT: Cleanup correctly */
+	debugfs_remove_recursive(clk_debugfs_root);
 	return err;
 }
 late_initcall(clk_debugfs_init);
-- 
cgit v1.2.3


From 7929eb9cf643ae416e5081b2a6fa558d37b9854c Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@cam.org>
Date: Thu, 3 Sep 2009 21:45:59 +0100
Subject: ARM: 5691/1: fix cache aliasing issues between kmap() and
 kmap_atomic() with highmem

Let's suppose a highmem page is kmap'd with kmap().  A pkmap entry is
used, the page mapped to it, and the virtual cache is dirtied.  Then
kunmap() is used which does virtually nothing except for decrementing a
usage count.

Then, let's suppose the _same_ page gets mapped using kmap_atomic().
It is therefore mapped onto a fixmap entry instead, which has a
different virtual address unaware of the dirty cache data for that page
sitting in the pkmap mapping.

Fortunately it is easy to know if a pkmap mapping still exists for that
page and use it directly with kmap_atomic(), thanks to kmap_high_get().

And actual testing with a printk in the added code path shows that this
condition is actually met *extremely* frequently.  Seems that we've been
quite lucky that things have worked so well with highmem so far.

Cc: stable@kernel.org
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/highmem.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c
index a34954d9df7..73cae57fa70 100644
--- a/arch/arm/mm/highmem.c
+++ b/arch/arm/mm/highmem.c
@@ -40,11 +40,16 @@ void *kmap_atomic(struct page *page, enum km_type type)
 {
 	unsigned int idx;
 	unsigned long vaddr;
+	void *kmap;
 
 	pagefault_disable();
 	if (!PageHighMem(page))
 		return page_address(page);
 
+	kmap = kmap_high_get(page);
+	if (kmap)
+		return kmap;
+
 	idx = type + KM_TYPE_NR * smp_processor_id();
 	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
 #ifdef CONFIG_DEBUG_HIGHMEM
@@ -80,6 +85,9 @@ void kunmap_atomic(void *kvaddr, enum km_type type)
 #else
 		(void) idx;  /* to kill a warning */
 #endif
+	} else if (vaddr >= PKMAP_ADDR(0) && vaddr < PKMAP_ADDR(LAST_PKMAP)) {
+		/* this address was obtained through kmap_high_get() */
+		kunmap_high(pte_page(pkmap_page_table[PKMAP_NR(vaddr)]));
 	}
 	pagefault_enable();
 }
-- 
cgit v1.2.3


From 56ddf7e6d4f69d7ce9f1c484b62e99d6b029e6f8 Mon Sep 17 00:00:00 2001
From: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Date: Wed, 2 Sep 2009 22:11:08 +0100
Subject: ARM: 5689/1: Update default config of HP Jornada 700-series machines

This patch updates the default config for HP Jornada 700-series handhelds.

Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/configs/jornada720_defconfig | 329 ++++++++++++++++++++++------------
 1 file changed, 210 insertions(+), 119 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/configs/jornada720_defconfig b/arch/arm/configs/jornada720_defconfig
index f3074e49f2f..df9bfbea861 100644
--- a/arch/arm/configs/jornada720_defconfig
+++ b/arch/arm/configs/jornada720_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc6
-# Tue Sep 16 18:56:58 2008
+# Linux kernel version: 2.6.31-rc6
+# Fri Aug 21 15:41:39 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -9,7 +9,6 @@ CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,16 +17,14 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_ZONE_DMA=y
 CONFIG_ARCH_MTD_XIP=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -44,10 +41,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -56,9 +62,11 @@ CONFIG_NAMESPACES=y
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
@@ -69,17 +77,22 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -87,30 +100,25 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -126,7 +134,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # System Type
@@ -136,14 +144,15 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -152,23 +161,25 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-CONFIG_DMABOUNCE=y
 
 #
 # SA11x0 Implementations
@@ -188,14 +199,6 @@ CONFIG_SA1100_JORNADA720_SSP=y
 # CONFIG_SA1100_SIMPAD is not set
 CONFIG_SA1100_SSP=y
 
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
 #
 # Processor Type
 #
@@ -215,8 +218,8 @@ CONFIG_CPU_CP15_MMU=y
 #
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
 CONFIG_SA1111=y
+CONFIG_DMABOUNCE=y
 CONFIG_FORCE_MAX_ZONEORDER=9
 
 #
@@ -246,30 +249,36 @@ CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_NODES_SHIFT=2
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 # CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
@@ -281,9 +290,10 @@ CONFIG_CMDLINE=""
 # CONFIG_KEXEC is not set
 
 #
-# CPU Frequency scaling
+# CPU Power Management
 #
 # CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
 
 #
 # Floating point emulation
@@ -294,12 +304,14 @@ CONFIG_CMDLINE=""
 #
 CONFIG_FPE_NWFPE=y
 # CONFIG_FPE_NWFPE_XP is not set
-CONFIG_FPE_FASTFPE=y
+# CONFIG_FPE_FASTFPE is not set
 
 #
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_ARTHUR is not set
@@ -353,7 +365,6 @@ CONFIG_INET_TCP_DIAG=y
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
@@ -367,10 +378,12 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_NETFILTER_NETLINK_LOG is not set
 # CONFIG_NF_CONNTRACK is not set
 # CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+# CONFIG_NF_DEFRAG_IPV4 is not set
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -379,6 +392,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -388,7 +402,10 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -431,14 +448,17 @@ CONFIG_IRCOMM=m
 CONFIG_SA1100_FIR=m
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 
 #
-# Wireless
+# CFG80211 needs to be enabled for MAC80211
 #
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -464,29 +484,34 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_PNP is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_NBD=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECS=y
 # CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -513,8 +538,34 @@ CONFIG_DUMMY=y
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_MII=m
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_AX88796 is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_DNET is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -523,17 +574,27 @@ CONFIG_MII=m
 # Wireless LAN
 #
 # CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN_80211=y
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_HERMES is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=m
-CONFIG_PCMCIA_3C574=m
-CONFIG_PCMCIA_FMVJ18X=m
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PCMCIA_NMCLAN=m
-CONFIG_PCMCIA_SMC91C92=m
-CONFIG_PCMCIA_XIRC2PS=m
-CONFIG_PCMCIA_AXNET=m
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+# CONFIG_PCMCIA_PCNET is not set
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_AXNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -565,20 +626,23 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
 #
 CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+CONFIG_KEYBOARD_HP7XX=y
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_HP7XX=y
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879 is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
@@ -587,8 +651,8 @@ CONFIG_TOUCHSCREEN_HP7XX=y
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -624,11 +688,12 @@ CONFIG_SERIAL_SA1100_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=32
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
@@ -649,6 +714,10 @@ CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
 # CONFIG_GPIO_SYSFS is not set
 
+#
+# Memory mapped GPIO expanders:
+#
+
 #
 # I2C GPIO expanders:
 #
@@ -663,12 +732,14 @@ CONFIG_GPIOLIB=y
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -676,6 +747,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
@@ -687,22 +759,7 @@ CONFIG_SSB_POSSIBLE=y
 # Multimedia Capabilities Port drivers
 #
 # CONFIG_MCP_SA11X0 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -712,6 +769,7 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -733,7 +791,17 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SA1100 is not set
 CONFIG_FB_S1D13XXX=y
 # CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_LCD_HP700=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_HP700=y
 
 #
 # Display device support
@@ -757,6 +825,8 @@ CONFIG_FONT_8x16=y
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -781,12 +851,15 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -794,15 +867,10 @@ CONFIG_RTC_INTF_DEV=y
 #
 CONFIG_RTC_DRV_SA1100=y
 # CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -811,12 +879,16 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -825,6 +897,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -846,14 +923,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -862,6 +937,7 @@ CONFIG_SYSFS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -870,6 +946,7 @@ CONFIG_SYSFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
 
 #
@@ -935,12 +1012,16 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -958,19 +1039,20 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -985,13 +1067,16 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1062,15 +1147,21 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1078,7 +1169,7 @@ CONFIG_CRC_CCITT=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
-- 
cgit v1.2.3


From d656f07a7405e788e1275d0238b67f593615f2bb Mon Sep 17 00:00:00 2001
From: sedji gaouaou <sedji.gaouaou@atmel.com>
Date: Thu, 6 Aug 2009 15:20:22 +0100
Subject: ARM: 5640/1: This patch modifies the support of AC97 on the
 at91sam9263 ek board

This patch modifies the support of AC97 on the at91sam9263 ek board, so it would
share the code with AVR32.
Plus it removes a typo in at91sam9263_devices.c.

Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/at91sam9263_devices.c | 14 +++++++-------
 arch/arm/mach-at91/board-sam9263ek.c     |  2 +-
 arch/arm/mach-at91/include/mach/board.h  |  6 ++----
 3 files changed, 10 insertions(+), 12 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index b7f23324231..55719a97427 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -707,9 +707,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
  *  AC97
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE)
+#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
 static u64 ac97_dmamask = DMA_BIT_MASK(32);
-static struct atmel_ac97_data ac97_data;
+static struct ac97c_platform_data ac97_data;
 
 static struct resource ac97_resources[] = {
 	[0] = {
@@ -725,8 +725,8 @@ static struct resource ac97_resources[] = {
 };
 
 static struct platform_device at91sam9263_ac97_device = {
-	.name		= "ac97c",
-	.id		= 1,
+	.name		= "atmel_ac97c",
+	.id		= 0,
 	.dev		= {
 				.dma_mask		= &ac97_dmamask,
 				.coherent_dma_mask	= DMA_BIT_MASK(32),
@@ -736,7 +736,7 @@ static struct platform_device at91sam9263_ac97_device = {
 	.num_resources	= ARRAY_SIZE(ac97_resources),
 };
 
-void __init at91_add_device_ac97(struct atmel_ac97_data *data)
+void __init at91_add_device_ac97(struct ac97c_platform_data *data)
 {
 	if (!data)
 		return;
@@ -750,11 +750,11 @@ void __init at91_add_device_ac97(struct atmel_ac97_data *data)
 	if (data->reset_pin)
 		at91_set_gpio_output(data->reset_pin, 0);
 
-	ac97_data = *ek_data;
+	ac97_data = *data;
 	platform_device_register(&at91sam9263_ac97_device);
 }
 #else
-void __init at91_add_device_ac97(struct atmel_ac97_data *data) {}
+void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 57d52528f22..3b669b78e45 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -365,7 +365,7 @@ static void __init ek_add_device_buttons(void) {}
 /*
  * AC97
  */
-static struct atmel_ac97_data ek_ac97_data = {
+static struct ac97c_platform_data ek_ac97_data = {
 	.reset_pin	= AT91_PIN_PA13,
 };
 
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 74801d275cd..13f27a4b882 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -37,6 +37,7 @@
 #include <linux/leds.h>
 #include <linux/spi/spi.h>
 #include <linux/usb/atmel_usba_udc.h>
+#include <sound/atmel-ac97c.h>
 
  /* USB Device */
 struct at91_udc_data {
@@ -174,10 +175,7 @@ struct atmel_lcdfb_info;
 extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data);
 
  /* AC97 */
-struct atmel_ac97_data {
-	u8		reset_pin;	/* reset */
-};
-extern void __init at91_add_device_ac97(struct atmel_ac97_data *data);
+extern void __init at91_add_device_ac97(struct ac97c_platform_data *data);
 
  /* ISI */
 extern void __init at91_add_device_isi(void);
-- 
cgit v1.2.3


From 8c3cbd5a2b2cc244277f6089dae83f09f1e7a27b Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Wed, 26 Aug 2009 15:33:16 +0100
Subject: ARM: 5686/1: at91: Correct AC97 reset line in at91sam9263ek board

Board code was wrongly setting up the reset pin for AC97 on at91sam9263ek.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/board-sam9263ek.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 3b669b78e45..1bf7bd4cbe1 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -364,9 +364,9 @@ static void __init ek_add_device_buttons(void) {}
 
 /*
  * AC97
+ * reset_pin is not connected: NRST
  */
 static struct ac97c_platform_data ek_ac97_data = {
-	.reset_pin	= AT91_PIN_PA13,
 };
 
 
-- 
cgit v1.2.3


From 5dbc46506a4f7b9f564bb7589a49ed32bc1caa15 Mon Sep 17 00:00:00 2001
From: Krzysztof Halasa <khc@pm.waw.pl>
Date: Sat, 5 Sep 2009 03:59:49 +0000
Subject: IXP42x HSS support for setting internal clock rate
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

HSS usually uses external clocks, so it's not a big deal. Internal clock
is used for direct DTE-DTE connections and when the DCE doesn't provide
it's own clock.

This also depends on the oscillator frequency. Intel seems to have
calculated the clock register settings for 33.33 MHz (66.66 MHz timer
base). Their settings seem quite suboptimal both in terms of average
frequency (60 ppm is unacceptable for G.703 applications, their primary
intended usage(?)) and jitter.

Many (most?) platforms use a 33.333 MHz oscillator, a 10 ppm difference
from Intel's base.

Instead of creating static tables, I've created a procedure to program
the HSS clock register. The register consists of 3 parts (A, B, C).
The average frequency (= bit rate) is:
66.66x MHz / (A  + (B + 1) / (C + 1))
The procedure aims at the closest average frequency, possibly at the
cost of increased jitter. Nobody would be able to directly drive an
unbufferred transmitter with a HSS anyway, and the frequency error is
what it really counts.

I've verified the above with an oscilloscope on IXP425. It seems IXP46x
and possibly IXP43x use a bit different clock generation algorithm - it
looks like the avg frequency is:
(on IXP465) 66.66x MHz / (A  + B / (C + 1)).
Also they use much greater precomputed A and B - on IXP425 it would
simply result in more jitter, but I don't know how does it work on
IXP46x (perhaps 3 least significant bits aren't used?).

Anyway it looks that they were aiming for exactly +60 ppm or -60 ppm,
while <1 ppm is typically possible (with a synchronized clock, of
course).

The attached patch makes it possible to set almost any bit rate
(my IXP425 533 MHz quits at > 22 Mb/s if a single port is used, and the
minimum is ca. 65 Kb/s).

This is independent of MVIP (multi-E1/T1 on one HSS) mode.

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/arm/mach-ixp4xx/common.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 1e93dfee754..5083f03e9b5 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -416,6 +416,7 @@ static struct clocksource clocksource_ixp4xx = {
 };
 
 unsigned long ixp4xx_timer_freq = FREQ;
+EXPORT_SYMBOL(ixp4xx_timer_freq);
 static int __init ixp4xx_clocksource_init(void)
 {
 	clocksource_ixp4xx.mult =
-- 
cgit v1.2.3


From 99f329a2ba3c2d07cc90ca9309babf27ddf98bff Mon Sep 17 00:00:00 2001
From: Pavel Machek <pavel@ucw.cz>
Date: Sun, 6 Sep 2009 07:28:40 +0200
Subject: [ARM] pxa/sharpsl_pm: zaurus c3000 aka spitz: fix resume

sharpsl_pm.c code tries to read battery state very early during
resume, but those battery meters are connected on SPI and that's only
resumed way later.

Replace the check with simple checking of battery fatal signal, that
actually works at this stage.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Stanislav Brabec <utx@penguin.cz>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/sharpsl_pm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 2546c066cd6..629e05d1196 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -678,8 +678,8 @@ static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enab
 		dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n");
 	}
 
-	if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) || (sharpsl_fatal_check() < 0) )
-	{
+	if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) ||
+	    (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL)))	{
 		dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n");
 		corgi_goto_sleep(alarm_time, alarm_enable, state);
 		return 1;
-- 
cgit v1.2.3


From 54782674084ed9dc829050a8c18298db6847679d Mon Sep 17 00:00:00 2001
From: Simon Guinot <sguinot@lacie.com>
Date: Tue, 23 Jun 2009 13:54:35 +0200
Subject: [ARM] orion5x: Add LaCie NAS 2Big Network support

This patch add support for the 2Big Network LaCie boards.

Signed-off-by: Simon Guinot <sguinot@lacie.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-orion5x/Kconfig         |   7 +
 arch/arm/mach-orion5x/Makefile        |   1 +
 arch/arm/mach-orion5x/net2big-setup.c | 431 ++++++++++++++++++++++++++++++++++
 3 files changed, 439 insertions(+)
 create mode 100644 arch/arm/mach-orion5x/net2big-setup.c

(limited to 'arch/arm')

diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index 5062b05b76b..c3d513cad5a 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -103,6 +103,13 @@ config MACH_BIGDISK
 	  Say 'Y' here if you want your kernel to support the
 	  LaCie Big Disk Network NAS.
 
+config MACH_NET2BIG
+	bool "LaCie 2Big Network"
+	select I2C_BOARDINFO
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  LaCie 2Big Network NAS.
+
 config MACH_MSS2
 	bool "Maxtor Shared Storage II"
 	help
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index 1db8a3a2708..89772fcd65c 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_MACH_MV2120)	+= mv2120-setup.o
 obj-$(CONFIG_MACH_EDMINI_V2)	+= edmini_v2-setup.o
 obj-$(CONFIG_MACH_D2NET)	+= d2net-setup.o
 obj-$(CONFIG_MACH_BIGDISK)	+= d2net-setup.o
+obj-$(CONFIG_MACH_NET2BIG)	+= net2big-setup.o
 obj-$(CONFIG_MACH_MSS2)		+= mss2-setup.o
 obj-$(CONFIG_MACH_WNR854T)	+= wnr854t-setup.o
 obj-$(CONFIG_MACH_RD88F5181L_GE)	+= rd88f5181l-ge-setup.o
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
new file mode 100644
index 00000000000..7bd6283476f
--- /dev/null
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -0,0 +1,431 @@
+/*
+ * arch/arm/mach-orion5x/net2big-setup.c
+ *
+ * LaCie 2Big Network NAS setup
+ *
+ * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * LaCie 2Big Network Info
+ ****************************************************************************/
+
+/*
+ * 512KB NOR flash Device bus boot chip select
+ */
+
+#define NET2BIG_NOR_BOOT_BASE		0xfff80000
+#define NET2BIG_NOR_BOOT_SIZE		SZ_512K
+
+/*****************************************************************************
+ * 512KB NOR Flash on Boot Device
+ ****************************************************************************/
+
+/*
+ * TODO: Check write support on flash MX29LV400CBTC-70G
+ */
+
+static struct mtd_partition net2big_partitions[] = {
+	{
+		.name		= "Full512kb",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= 0x00000000,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+};
+
+static struct physmap_flash_data net2big_nor_flash_data = {
+	.width		= 1,
+	.parts		= net2big_partitions,
+	.nr_parts	= ARRAY_SIZE(net2big_partitions),
+};
+
+static struct resource net2big_nor_flash_resource = {
+	.flags			= IORESOURCE_MEM,
+	.start			= NET2BIG_NOR_BOOT_BASE,
+	.end			= NET2BIG_NOR_BOOT_BASE
+					+ NET2BIG_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device net2big_nor_flash = {
+	.name			= "physmap-flash",
+	.id			= 0,
+	.dev		= {
+		.platform_data	= &net2big_nor_flash_data,
+	},
+	.num_resources		= 1,
+	.resource		= &net2big_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data net2big_eth_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+/*****************************************************************************
+ * I2C devices
+ ****************************************************************************/
+
+/*
+ * i2c addr | chip         | description
+ * 0x32     | Ricoh 5C372b | RTC
+ * 0x50     | HT24LC08     | eeprom (1kB)
+ */
+static struct i2c_board_info __initdata net2big_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("rs5c372b", 0x32),
+	}, {
+		I2C_BOARD_INFO("24c08", 0x50),
+	},
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+
+static struct mv_sata_platform_data net2big_sata_data = {
+	.n_ports	= 2,
+};
+
+#define NET2BIG_GPIO_SATA_POWER_REQ	19
+#define NET2BIG_GPIO_SATA0_POWER	23
+#define NET2BIG_GPIO_SATA1_POWER	25
+
+static void __init net2big_sata_power_init(void)
+{
+	int err;
+
+	/* Configure GPIOs over MPP max number. */
+	orion_gpio_set_valid(NET2BIG_GPIO_SATA0_POWER, 1);
+	orion_gpio_set_valid(NET2BIG_GPIO_SATA1_POWER, 1);
+
+	err = gpio_request(NET2BIG_GPIO_SATA0_POWER, "SATA0 power status");
+	if (err == 0) {
+		err = gpio_direction_input(NET2BIG_GPIO_SATA0_POWER);
+		if (err)
+			gpio_free(NET2BIG_GPIO_SATA0_POWER);
+	}
+	if (err) {
+		pr_err("net2big: failed to setup SATA0 power GPIO\n");
+		return;
+	}
+
+	err = gpio_request(NET2BIG_GPIO_SATA1_POWER, "SATA1 power status");
+	if (err == 0) {
+		err = gpio_direction_input(NET2BIG_GPIO_SATA1_POWER);
+		if (err)
+			gpio_free(NET2BIG_GPIO_SATA1_POWER);
+	}
+	if (err) {
+		pr_err("net2big: failed to setup SATA1 power GPIO\n");
+		goto err_free_1;
+	}
+
+	err = gpio_request(NET2BIG_GPIO_SATA_POWER_REQ, "SATA power request");
+	if (err == 0) {
+		err = gpio_direction_output(NET2BIG_GPIO_SATA_POWER_REQ, 0);
+		if (err)
+			gpio_free(NET2BIG_GPIO_SATA_POWER_REQ);
+	}
+	if (err) {
+		pr_err("net2big: failed to setup SATA power request GPIO\n");
+		goto err_free_2;
+	}
+
+	if (gpio_get_value(NET2BIG_GPIO_SATA0_POWER) &&
+		gpio_get_value(NET2BIG_GPIO_SATA1_POWER)) {
+		return;
+	}
+
+	/*
+	 * SATA power up on both disk is done by pulling high the CPLD power
+	 * request line. The 300ms delay is related to the CPLD clock and is
+	 * needed to be sure that the CPLD has take into account the low line
+	 * status.
+	 */
+	msleep(300);
+	gpio_set_value(NET2BIG_GPIO_SATA_POWER_REQ, 1);
+	pr_info("net2big: power up SATA hard disks\n");
+
+	return;
+
+err_free_2:
+	gpio_free(NET2BIG_GPIO_SATA1_POWER);
+err_free_1:
+	gpio_free(NET2BIG_GPIO_SATA0_POWER);
+
+	return;
+}
+
+/*****************************************************************************
+ * GPIO LEDs
+ ****************************************************************************/
+
+/*
+ * The power front LEDs (blue and red) and SATA red LEDs are controlled via a
+ * single GPIO line and are compatible with the leds-gpio driver.
+ *
+ * The SATA blue LEDs have some hardware blink capabilities which are detailled
+ * in the following array:
+ *
+ * SATAx blue LED | SATAx activity | LED state
+ *                |                |
+ *       0        |       0        |  blink (rate 300ms)
+ *       1        |       0        |  off
+ *       ?        |       1        |  on
+ *
+ * Notes: The blue and the red front LED's can't be on at the same time.
+ *        Blue LED have priority.
+ */
+
+#define NET2BIG_GPIO_PWR_RED_LED	6
+#define NET2BIG_GPIO_PWR_BLUE_LED	16
+#define NET2BIG_GPIO_PWR_LED_BLINK_STOP	7
+
+#define NET2BIG_GPIO_SATA0_RED_LED	11
+#define NET2BIG_GPIO_SATA1_RED_LED	10
+
+#define NET2BIG_GPIO_SATA0_BLUE_LED	17
+#define NET2BIG_GPIO_SATA1_BLUE_LED	13
+
+static struct gpio_led net2big_leds[] = {
+	{
+		.name = "net2big:red:power",
+		.gpio = NET2BIG_GPIO_PWR_RED_LED,
+	},
+	{
+		.name = "net2big:blue:power",
+		.gpio = NET2BIG_GPIO_PWR_BLUE_LED,
+	},
+	{
+		.name = "net2big:red:sata0",
+		.gpio = NET2BIG_GPIO_SATA0_RED_LED,
+	},
+	{
+		.name = "net2big:red:sata1",
+		.gpio = NET2BIG_GPIO_SATA1_RED_LED,
+	},
+};
+
+static struct gpio_led_platform_data net2big_led_data = {
+	.num_leds = ARRAY_SIZE(net2big_leds),
+	.leds = net2big_leds,
+};
+
+static struct platform_device net2big_gpio_leds = {
+	.name           = "leds-gpio",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &net2big_led_data,
+	},
+};
+
+static void __init net2big_gpio_leds_init(void)
+{
+	int err;
+
+	/* Stop initial CPLD slow red/blue blinking on power LED. */
+	err = gpio_request(NET2BIG_GPIO_PWR_LED_BLINK_STOP,
+			   "Power LED blink stop");
+	if (err == 0) {
+		err = gpio_direction_output(NET2BIG_GPIO_PWR_LED_BLINK_STOP, 1);
+		if (err)
+			gpio_free(NET2BIG_GPIO_PWR_LED_BLINK_STOP);
+	}
+	if (err)
+		pr_err("net2big: failed to setup power LED blink GPIO\n");
+
+	/*
+	 * Configure SATA0 and SATA1 blue LEDs to blink in relation with the
+	 * hard disk activity.
+	 */
+	err = gpio_request(NET2BIG_GPIO_SATA0_BLUE_LED,
+			   "SATA0 blue LED control");
+	if (err == 0) {
+		err = gpio_direction_output(NET2BIG_GPIO_SATA0_BLUE_LED, 1);
+		if (err)
+			gpio_free(NET2BIG_GPIO_SATA0_BLUE_LED);
+	}
+	if (err)
+		pr_err("net2big: failed to setup SATA0 blue LED GPIO\n");
+
+	err = gpio_request(NET2BIG_GPIO_SATA1_BLUE_LED,
+			   "SATA1 blue LED control");
+	if (err == 0) {
+		err = gpio_direction_output(NET2BIG_GPIO_SATA1_BLUE_LED, 1);
+		if (err)
+			gpio_free(NET2BIG_GPIO_SATA1_BLUE_LED);
+	}
+	if (err)
+		pr_err("net2big: failed to setup SATA1 blue LED GPIO\n");
+
+	platform_device_register(&net2big_gpio_leds);
+}
+
+/****************************************************************************
+ * GPIO keys
+ ****************************************************************************/
+
+#define NET2BIG_GPIO_PUSH_BUTTON	18
+#define NET2BIG_GPIO_POWER_SWITCH_ON	8
+#define NET2BIG_GPIO_POWER_SWITCH_OFF	9
+
+#define NET2BIG_SWITCH_POWER_ON		0x1
+#define NET2BIG_SWITCH_POWER_OFF	0x2
+
+static struct gpio_keys_button net2big_buttons[] = {
+	{
+		.type		= EV_SW,
+		.code		= NET2BIG_SWITCH_POWER_OFF,
+		.gpio		= NET2BIG_GPIO_POWER_SWITCH_OFF,
+		.desc		= "Power rocker switch (auto|off)",
+		.active_low	= 0,
+	},
+	{
+		.type		= EV_SW,
+		.code		= NET2BIG_SWITCH_POWER_ON,
+		.gpio		= NET2BIG_GPIO_POWER_SWITCH_ON,
+		.desc		= "Power rocker switch (on|auto)",
+		.active_low	= 0,
+	},
+	{
+		.type		= EV_KEY,
+		.code		= KEY_POWER,
+		.gpio		= NET2BIG_GPIO_PUSH_BUTTON,
+		.desc		= "Front Push Button",
+		.active_low	= 0,
+	},
+};
+
+static struct gpio_keys_platform_data net2big_button_data = {
+	.buttons	= net2big_buttons,
+	.nbuttons	= ARRAY_SIZE(net2big_buttons),
+};
+
+static struct platform_device net2big_gpio_buttons = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &net2big_button_data,
+	},
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static struct orion5x_mpp_mode net2big_mpp_modes[] __initdata = {
+	{  0, MPP_GPIO },	/* Raid mode (bit 0) */
+	{  1, MPP_GPIO },	/* USB port 2 fuse (0 = Fail, 1 = Ok) */
+	{  2, MPP_GPIO },	/* Raid mode (bit 1) */
+	{  3, MPP_GPIO },	/* Board ID (bit 0) */
+	{  4, MPP_GPIO },	/* Fan activity (0 = Off, 1 = On) */
+	{  5, MPP_GPIO },	/* Fan fail detection */
+	{  6, MPP_GPIO },	/* Red front LED (0 = Off, 1 = On) */
+	{  7, MPP_GPIO },	/* Disable initial blinking on front LED */
+	{  8, MPP_GPIO },	/* Rear power switch (on|auto) */
+	{  9, MPP_GPIO },	/* Rear power switch (auto|off) */
+	{ 10, MPP_GPIO },	/* SATA 1 red LED (0 = Off, 1 = On) */
+	{ 11, MPP_GPIO },	/* SATA 0 red LED (0 = Off, 1 = On) */
+	{ 12, MPP_GPIO },	/* Board ID (bit 1) */
+	{ 13, MPP_GPIO },	/* SATA 1 blue LED blink control */
+	{ 14, MPP_SATA_LED },
+	{ 15, MPP_SATA_LED },
+	{ 16, MPP_GPIO },	/* Blue front LED control */
+	{ 17, MPP_GPIO },	/* SATA 0 blue LED blink control */
+	{ 18, MPP_GPIO },	/* Front button (0 = Released, 1 = Pushed ) */
+	{ 19, MPP_GPIO },	/* SATA{0,1} power On/Off request */
+	{ -1 }
+	/* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */
+	/* 23: SATA 0 power status */
+	/* 24: Board power off */
+	/* 25: SATA 1 power status */
+};
+
+#define NET2BIG_GPIO_POWER_OFF		24
+
+static void net2big_power_off(void)
+{
+	gpio_set_value(NET2BIG_GPIO_POWER_OFF, 1);
+}
+
+static void __init net2big_init(void)
+{
+	/*
+	 * Setup basic Orion functions. Need to be called early.
+	 */
+	orion5x_init();
+
+	orion5x_mpp_conf(net2big_mpp_modes);
+
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_ehci0_init();
+	orion5x_ehci1_init();
+	orion5x_eth_init(&net2big_eth_data);
+	orion5x_i2c_init();
+	orion5x_uart0_init();
+	orion5x_xor_init();
+
+	net2big_sata_power_init();
+	orion5x_sata_init(&net2big_sata_data);
+
+	orion5x_setup_dev_boot_win(NET2BIG_NOR_BOOT_BASE,
+				   NET2BIG_NOR_BOOT_SIZE);
+	platform_device_register(&net2big_nor_flash);
+
+	platform_device_register(&net2big_gpio_buttons);
+	net2big_gpio_leds_init();
+
+	i2c_register_board_info(0, net2big_i2c_devices,
+				ARRAY_SIZE(net2big_i2c_devices));
+
+	orion_gpio_set_valid(NET2BIG_GPIO_POWER_OFF, 1);
+
+	if (gpio_request(NET2BIG_GPIO_POWER_OFF, "power-off") == 0 &&
+	    gpio_direction_output(NET2BIG_GPIO_POWER_OFF, 0) == 0)
+		pm_power_off = net2big_power_off;
+	else
+		pr_err("net2big: failed to configure power-off GPIO\n");
+
+	pr_notice("net2big: Flash writing is not yet supported.\n");
+}
+
+/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
+MACHINE_START(NET2BIG, "LaCie 2Big Network")
+	.phys_io	= ORION5X_REGS_PHYS_BASE,
+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+	.boot_params	= 0x00000100,
+	.init_machine	= net2big_init,
+	.map_io		= orion5x_map_io,
+	.init_irq	= orion5x_init_irq,
+	.timer		= &orion5x_timer,
+	.fixup		= tag_fixup_mem32,
+MACHINE_END
+
-- 
cgit v1.2.3


From 9308add6ea4fedeba37b0d7c4630a542bd34f214 Mon Sep 17 00:00:00 2001
From: Dan Williams <dan.j.williams@intel.com>
Date: Tue, 8 Sep 2009 17:42:52 -0700
Subject: dmaengine: cleanup unused transaction types

No drivers currently implement these operation types, so they can be
deleted.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 arch/arm/mach-iop13xx/setup.c | 7 -------
 arch/arm/plat-iop/adma.c      | 2 --
 2 files changed, 9 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c
index faaef95342b..5c147fb66a0 100644
--- a/arch/arm/mach-iop13xx/setup.c
+++ b/arch/arm/mach-iop13xx/setup.c
@@ -477,10 +477,8 @@ void __init iop13xx_platform_init(void)
 			plat_data = &iop13xx_adma_0_data;
 			dma_cap_set(DMA_MEMCPY, plat_data->cap_mask);
 			dma_cap_set(DMA_XOR, plat_data->cap_mask);
-			dma_cap_set(DMA_DUAL_XOR, plat_data->cap_mask);
 			dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask);
 			dma_cap_set(DMA_MEMSET, plat_data->cap_mask);
-			dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask);
 			dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask);
 			break;
 		case IOP13XX_INIT_ADMA_1:
@@ -489,10 +487,8 @@ void __init iop13xx_platform_init(void)
 			plat_data = &iop13xx_adma_1_data;
 			dma_cap_set(DMA_MEMCPY, plat_data->cap_mask);
 			dma_cap_set(DMA_XOR, plat_data->cap_mask);
-			dma_cap_set(DMA_DUAL_XOR, plat_data->cap_mask);
 			dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask);
 			dma_cap_set(DMA_MEMSET, plat_data->cap_mask);
-			dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask);
 			dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask);
 			break;
 		case IOP13XX_INIT_ADMA_2:
@@ -501,13 +497,10 @@ void __init iop13xx_platform_init(void)
 			plat_data = &iop13xx_adma_2_data;
 			dma_cap_set(DMA_MEMCPY, plat_data->cap_mask);
 			dma_cap_set(DMA_XOR, plat_data->cap_mask);
-			dma_cap_set(DMA_DUAL_XOR, plat_data->cap_mask);
 			dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask);
 			dma_cap_set(DMA_MEMSET, plat_data->cap_mask);
-			dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask);
 			dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask);
 			dma_cap_set(DMA_PQ, plat_data->cap_mask);
-			dma_cap_set(DMA_PQ_UPDATE, plat_data->cap_mask);
 			dma_cap_set(DMA_PQ_VAL, plat_data->cap_mask);
 			break;
 		}
diff --git a/arch/arm/plat-iop/adma.c b/arch/arm/plat-iop/adma.c
index da1dd0dab07..1ff6a37e893 100644
--- a/arch/arm/plat-iop/adma.c
+++ b/arch/arm/plat-iop/adma.c
@@ -179,7 +179,6 @@ static int __init iop3xx_adma_cap_init(void)
 	dma_cap_set(DMA_INTERRUPT, iop3xx_dma_0_data.cap_mask);
 	#else
 	dma_cap_set(DMA_MEMCPY, iop3xx_dma_0_data.cap_mask);
-	dma_cap_set(DMA_MEMCPY_CRC32C, iop3xx_dma_0_data.cap_mask);
 	dma_cap_set(DMA_INTERRUPT, iop3xx_dma_0_data.cap_mask);
 	#endif
 
@@ -188,7 +187,6 @@ static int __init iop3xx_adma_cap_init(void)
 	dma_cap_set(DMA_INTERRUPT, iop3xx_dma_1_data.cap_mask);
 	#else
 	dma_cap_set(DMA_MEMCPY, iop3xx_dma_1_data.cap_mask);
-	dma_cap_set(DMA_MEMCPY_CRC32C, iop3xx_dma_1_data.cap_mask);
 	dma_cap_set(DMA_INTERRUPT, iop3xx_dma_1_data.cap_mask);
 	#endif
 
-- 
cgit v1.2.3


From 308136d1abcb2d759bac40ed4f5d42ac4af59d8b Mon Sep 17 00:00:00 2001
From: Dan Williams <dan.j.williams@intel.com>
Date: Tue, 8 Sep 2009 17:53:02 -0700
Subject: iop-adma: implement a private tx_list

Drop iop-adma's use of tx_list from struct dma_async_tx_descriptor in
preparation for removal of this field.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 arch/arm/include/asm/hardware/iop_adma.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/hardware/iop_adma.h b/arch/arm/include/asm/hardware/iop_adma.h
index 385c6e8cbbd..95dc133d0a7 100644
--- a/arch/arm/include/asm/hardware/iop_adma.h
+++ b/arch/arm/include/asm/hardware/iop_adma.h
@@ -86,6 +86,7 @@ struct iop_adma_chan {
  * @idx: pool index
  * @unmap_src_cnt: number of xor sources
  * @unmap_len: transaction bytecount
+ * @tx_list: list of descriptors that are associated with one operation
  * @async_tx: support for the async_tx api
  * @group_list: list of slots that make up a multi-descriptor transaction
  *	for example transfer lengths larger than the supported hw max
@@ -102,6 +103,7 @@ struct iop_adma_desc_slot {
 	u16 idx;
 	u16 unmap_src_cnt;
 	size_t unmap_len;
+	struct list_head tx_list;
 	struct dma_async_tx_descriptor async_tx;
 	union {
 		u32 *xor_check_result;
-- 
cgit v1.2.3


From 733e5e4b4eb1bc1e27acbe092200154051171426 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Wed, 9 Sep 2009 08:30:21 +0100
Subject: KEYS: Add missing linux/tracehook.h #inclusions

Add #inclusions of linux/tracehook.h to those arch files that had the tracehook
call for TIF_NOTIFY_RESUME added when support for that flag was added to that
arch.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
---
 arch/arm/kernel/signal.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index ea4ad3a43c8..b76fe06d92e 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -12,6 +12,7 @@
 #include <linux/personality.h>
 #include <linux/freezer.h>
 #include <linux/uaccess.h>
+#include <linux/tracehook.h>
 
 #include <asm/elf.h>
 #include <asm/cacheflush.h>
-- 
cgit v1.2.3


From a7db50405216610c8a0d62b8b400180b6f366733 Mon Sep 17 00:00:00 2001
From: Alex Chiang <achiang@hp.com>
Date: Mon, 22 Jun 2009 08:08:07 -0600
Subject: PCI: remove pcibios_scan_all_fns()

This was #define'd as 0 on all platforms, so let's get rid of it.

This change makes pci_scan_slot() slightly easier to read.

Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Tony Luck <tony.luck@intel.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Acked-by: Russell King <linux@arm.linux.org.uk>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 arch/arm/include/asm/pci.h | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h
index 0abf386ba3d..226cddd2fb6 100644
--- a/arch/arm/include/asm/pci.h
+++ b/arch/arm/include/asm/pci.h
@@ -6,8 +6,6 @@
 
 #include <mach/hardware.h> /* for PCIBIOS_MIN_* */
 
-#define pcibios_scan_all_fns(a, b)	0
-
 #ifdef CONFIG_PCI_HOST_ITE8152
 /* ITE bridge requires setting latency timer to avoid early bus access
    termination by PIC bus mater devices
-- 
cgit v1.2.3


From ee297936a7ed7e8477a200eb9c6de13150adbf0c Mon Sep 17 00:00:00 2001
From: Philipp Zabel <philipp.zabel@gmail.com>
Date: Fri, 7 Aug 2009 15:51:12 +0200
Subject: [ARM] pxa: remove left-over struct clk *other field from struct clk

Its removal was omitted when all its uses were removed in 8c3abc7d...
"[ARM] pxa: convert to clkdev and match clocks by struct device where possible"

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/clock.h | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
index 5599bceff73..978a3667e90 100644
--- a/arch/arm/mach-pxa/clock.h
+++ b/arch/arm/mach-pxa/clock.h
@@ -12,7 +12,6 @@ struct clk {
 	unsigned int		cken;
 	unsigned int		delay;
 	unsigned int		enabled;
-	struct clk		*other;
 };
 
 #define INIT_CLKREG(_clk,_devname,_conname)		\
-- 
cgit v1.2.3


From 9304d008d6ba41ff52ef6eae44337398e83b4436 Mon Sep 17 00:00:00 2001
From: Haojian Zhuang <haojian.zhuang@marvell.com>
Date: Mon, 31 Aug 2009 20:16:54 +0800
Subject: [ARM] pxa: remove duplicate mfp definition in mach

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/include/mach/mfp.h | 301 +----------------------------------
 1 file changed, 1 insertion(+), 300 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/include/mach/mfp.h b/arch/arm/mach-pxa/include/mach/mfp.h
index 482185053a9..271e249ae34 100644
--- a/arch/arm/mach-pxa/include/mach/mfp.h
+++ b/arch/arm/mach-pxa/include/mach/mfp.h
@@ -16,305 +16,6 @@
 #ifndef __ASM_ARCH_MFP_H
 #define __ASM_ARCH_MFP_H
 
-#define mfp_to_gpio(m)	((m) % 128)
-
-/* list of all the configurable MFP pins */
-enum {
-	MFP_PIN_INVALID = -1,
-
-	MFP_PIN_GPIO0 = 0,
-	MFP_PIN_GPIO1,
-	MFP_PIN_GPIO2,
-	MFP_PIN_GPIO3,
-	MFP_PIN_GPIO4,
-	MFP_PIN_GPIO5,
-	MFP_PIN_GPIO6,
-	MFP_PIN_GPIO7,
-	MFP_PIN_GPIO8,
-	MFP_PIN_GPIO9,
-	MFP_PIN_GPIO10,
-	MFP_PIN_GPIO11,
-	MFP_PIN_GPIO12,
-	MFP_PIN_GPIO13,
-	MFP_PIN_GPIO14,
-	MFP_PIN_GPIO15,
-	MFP_PIN_GPIO16,
-	MFP_PIN_GPIO17,
-	MFP_PIN_GPIO18,
-	MFP_PIN_GPIO19,
-	MFP_PIN_GPIO20,
-	MFP_PIN_GPIO21,
-	MFP_PIN_GPIO22,
-	MFP_PIN_GPIO23,
-	MFP_PIN_GPIO24,
-	MFP_PIN_GPIO25,
-	MFP_PIN_GPIO26,
-	MFP_PIN_GPIO27,
-	MFP_PIN_GPIO28,
-	MFP_PIN_GPIO29,
-	MFP_PIN_GPIO30,
-	MFP_PIN_GPIO31,
-	MFP_PIN_GPIO32,
-	MFP_PIN_GPIO33,
-	MFP_PIN_GPIO34,
-	MFP_PIN_GPIO35,
-	MFP_PIN_GPIO36,
-	MFP_PIN_GPIO37,
-	MFP_PIN_GPIO38,
-	MFP_PIN_GPIO39,
-	MFP_PIN_GPIO40,
-	MFP_PIN_GPIO41,
-	MFP_PIN_GPIO42,
-	MFP_PIN_GPIO43,
-	MFP_PIN_GPIO44,
-	MFP_PIN_GPIO45,
-	MFP_PIN_GPIO46,
-	MFP_PIN_GPIO47,
-	MFP_PIN_GPIO48,
-	MFP_PIN_GPIO49,
-	MFP_PIN_GPIO50,
-	MFP_PIN_GPIO51,
-	MFP_PIN_GPIO52,
-	MFP_PIN_GPIO53,
-	MFP_PIN_GPIO54,
-	MFP_PIN_GPIO55,
-	MFP_PIN_GPIO56,
-	MFP_PIN_GPIO57,
-	MFP_PIN_GPIO58,
-	MFP_PIN_GPIO59,
-	MFP_PIN_GPIO60,
-	MFP_PIN_GPIO61,
-	MFP_PIN_GPIO62,
-	MFP_PIN_GPIO63,
-	MFP_PIN_GPIO64,
-	MFP_PIN_GPIO65,
-	MFP_PIN_GPIO66,
-	MFP_PIN_GPIO67,
-	MFP_PIN_GPIO68,
-	MFP_PIN_GPIO69,
-	MFP_PIN_GPIO70,
-	MFP_PIN_GPIO71,
-	MFP_PIN_GPIO72,
-	MFP_PIN_GPIO73,
-	MFP_PIN_GPIO74,
-	MFP_PIN_GPIO75,
-	MFP_PIN_GPIO76,
-	MFP_PIN_GPIO77,
-	MFP_PIN_GPIO78,
-	MFP_PIN_GPIO79,
-	MFP_PIN_GPIO80,
-	MFP_PIN_GPIO81,
-	MFP_PIN_GPIO82,
-	MFP_PIN_GPIO83,
-	MFP_PIN_GPIO84,
-	MFP_PIN_GPIO85,
-	MFP_PIN_GPIO86,
-	MFP_PIN_GPIO87,
-	MFP_PIN_GPIO88,
-	MFP_PIN_GPIO89,
-	MFP_PIN_GPIO90,
-	MFP_PIN_GPIO91,
-	MFP_PIN_GPIO92,
-	MFP_PIN_GPIO93,
-	MFP_PIN_GPIO94,
-	MFP_PIN_GPIO95,
-	MFP_PIN_GPIO96,
-	MFP_PIN_GPIO97,
-	MFP_PIN_GPIO98,
-	MFP_PIN_GPIO99,
-	MFP_PIN_GPIO100,
-	MFP_PIN_GPIO101,
-	MFP_PIN_GPIO102,
-	MFP_PIN_GPIO103,
-	MFP_PIN_GPIO104,
-	MFP_PIN_GPIO105,
-	MFP_PIN_GPIO106,
-	MFP_PIN_GPIO107,
-	MFP_PIN_GPIO108,
-	MFP_PIN_GPIO109,
-	MFP_PIN_GPIO110,
-	MFP_PIN_GPIO111,
-	MFP_PIN_GPIO112,
-	MFP_PIN_GPIO113,
-	MFP_PIN_GPIO114,
-	MFP_PIN_GPIO115,
-	MFP_PIN_GPIO116,
-	MFP_PIN_GPIO117,
-	MFP_PIN_GPIO118,
-	MFP_PIN_GPIO119,
-	MFP_PIN_GPIO120,
-	MFP_PIN_GPIO121,
-	MFP_PIN_GPIO122,
-	MFP_PIN_GPIO123,
-	MFP_PIN_GPIO124,
-	MFP_PIN_GPIO125,
-	MFP_PIN_GPIO126,
-	MFP_PIN_GPIO127,
-	MFP_PIN_GPIO0_2,
-	MFP_PIN_GPIO1_2,
-	MFP_PIN_GPIO2_2,
-	MFP_PIN_GPIO3_2,
-	MFP_PIN_GPIO4_2,
-	MFP_PIN_GPIO5_2,
-	MFP_PIN_GPIO6_2,
-	MFP_PIN_GPIO7_2,
-	MFP_PIN_GPIO8_2,
-	MFP_PIN_GPIO9_2,
-	MFP_PIN_GPIO10_2,
-	MFP_PIN_GPIO11_2,
-	MFP_PIN_GPIO12_2,
-	MFP_PIN_GPIO13_2,
-	MFP_PIN_GPIO14_2,
-	MFP_PIN_GPIO15_2,
-	MFP_PIN_GPIO16_2,
-	MFP_PIN_GPIO17_2,
-
-	MFP_PIN_ULPI_STP,
-	MFP_PIN_ULPI_NXT,
-	MFP_PIN_ULPI_DIR,
-
-	MFP_PIN_nXCVREN,
-	MFP_PIN_DF_CLE_nOE,
-	MFP_PIN_DF_nADV1_ALE,
-	MFP_PIN_DF_SCLK_E,
-	MFP_PIN_DF_SCLK_S,
-	MFP_PIN_nBE0,
-	MFP_PIN_nBE1,
-	MFP_PIN_DF_nADV2_ALE,
-	MFP_PIN_DF_INT_RnB,
-	MFP_PIN_DF_nCS0,
-	MFP_PIN_DF_nCS1,
-	MFP_PIN_nLUA,
-	MFP_PIN_nLLA,
-	MFP_PIN_DF_nWE,
-	MFP_PIN_DF_ALE_nWE,
-	MFP_PIN_DF_nRE_nOE,
-	MFP_PIN_DF_ADDR0,
-	MFP_PIN_DF_ADDR1,
-	MFP_PIN_DF_ADDR2,
-	MFP_PIN_DF_ADDR3,
-	MFP_PIN_DF_IO0,
-	MFP_PIN_DF_IO1,
-	MFP_PIN_DF_IO2,
-	MFP_PIN_DF_IO3,
-	MFP_PIN_DF_IO4,
-	MFP_PIN_DF_IO5,
-	MFP_PIN_DF_IO6,
-	MFP_PIN_DF_IO7,
-	MFP_PIN_DF_IO8,
-	MFP_PIN_DF_IO9,
-	MFP_PIN_DF_IO10,
-	MFP_PIN_DF_IO11,
-	MFP_PIN_DF_IO12,
-	MFP_PIN_DF_IO13,
-	MFP_PIN_DF_IO14,
-	MFP_PIN_DF_IO15,
-
-	/* additional pins on PXA930 */
-	MFP_PIN_GSIM_UIO,
-	MFP_PIN_GSIM_UCLK,
-	MFP_PIN_GSIM_UDET,
-	MFP_PIN_GSIM_nURST,
-	MFP_PIN_PMIC_INT,
-	MFP_PIN_RDY,
-
-	MFP_PIN_MAX,
-};
-
-/*
- * a possible MFP configuration is represented by a 32-bit integer
- *
- * bit  0.. 9 - MFP Pin Number (1024 Pins Maximum)
- * bit 10..12 - Alternate Function Selection
- * bit 13..15 - Drive Strength
- * bit 16..18 - Low Power Mode State
- * bit 19..20 - Low Power Mode Edge Detection
- * bit 21..22 - Run Mode Pull State
- *
- * to facilitate the definition, the following macros are provided
- *
- * MFP_CFG_DEFAULT - default MFP configuration value, with
- * 		  alternate function = 0,
- * 		  drive strength = fast 3mA (MFP_DS03X)
- * 		  low power mode = default
- * 		  edge detection = none
- *
- * MFP_CFG	- default MFPR value with alternate function
- * MFP_CFG_DRV	- default MFPR value with alternate function and
- * 		  pin drive strength
- * MFP_CFG_LPM	- default MFPR value with alternate function and
- * 		  low power mode
- * MFP_CFG_X	- default MFPR value with alternate function,
- * 		  pin drive strength and low power mode
- */
-
-typedef unsigned long mfp_cfg_t;
-
-#define MFP_PIN(x)		((x) & 0x3ff)
-
-#define MFP_AF0			(0x0 << 10)
-#define MFP_AF1			(0x1 << 10)
-#define MFP_AF2			(0x2 << 10)
-#define MFP_AF3			(0x3 << 10)
-#define MFP_AF4			(0x4 << 10)
-#define MFP_AF5			(0x5 << 10)
-#define MFP_AF6			(0x6 << 10)
-#define MFP_AF7			(0x7 << 10)
-#define MFP_AF_MASK		(0x7 << 10)
-#define MFP_AF(x)		(((x) >> 10) & 0x7)
-
-#define MFP_DS01X		(0x0 << 13)
-#define MFP_DS02X		(0x1 << 13)
-#define MFP_DS03X		(0x2 << 13)
-#define MFP_DS04X		(0x3 << 13)
-#define MFP_DS06X		(0x4 << 13)
-#define MFP_DS08X		(0x5 << 13)
-#define MFP_DS10X		(0x6 << 13)
-#define MFP_DS13X		(0x7 << 13)
-#define MFP_DS_MASK		(0x7 << 13)
-#define MFP_DS(x)		(((x) >> 13) & 0x7)
-
-#define MFP_LPM_DEFAULT		(0x0 << 16)
-#define MFP_LPM_DRIVE_LOW	(0x1 << 16)
-#define MFP_LPM_DRIVE_HIGH	(0x2 << 16)
-#define MFP_LPM_PULL_LOW	(0x3 << 16)
-#define MFP_LPM_PULL_HIGH	(0x4 << 16)
-#define MFP_LPM_FLOAT		(0x5 << 16)
-#define MFP_LPM_INPUT		(0x6 << 16)
-#define MFP_LPM_STATE_MASK	(0x7 << 16)
-#define MFP_LPM_STATE(x)	(((x) >> 16) & 0x7)
-
-#define MFP_LPM_EDGE_NONE	(0x0 << 19)
-#define MFP_LPM_EDGE_RISE	(0x1 << 19)
-#define MFP_LPM_EDGE_FALL	(0x2 << 19)
-#define MFP_LPM_EDGE_BOTH	(0x3 << 19)
-#define MFP_LPM_EDGE_MASK	(0x3 << 19)
-#define MFP_LPM_EDGE(x)		(((x) >> 19) & 0x3)
-
-#define MFP_PULL_NONE		(0x0 << 21)
-#define MFP_PULL_LOW		(0x1 << 21)
-#define MFP_PULL_HIGH		(0x2 << 21)
-#define MFP_PULL_BOTH		(0x3 << 21)
-#define MFP_PULL_MASK		(0x3 << 21)
-#define MFP_PULL(x)		(((x) >> 21) & 0x3)
-
-#define MFP_CFG_DEFAULT		(MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\
-				 MFP_LPM_EDGE_NONE | MFP_PULL_NONE)
-
-#define MFP_CFG(pin, af)		\
-	((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af))
-
-#define MFP_CFG_DRV(pin, af, drv)	\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv))
-
-#define MFP_CFG_LPM(pin, af, lpm)	\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm))
-
-#define MFP_CFG_X(pin, af, drv, lpm)	\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm))
+#include <plat/mfp.h>
 
 #endif /* __ASM_ARCH_MFP_H */
-- 
cgit v1.2.3


From fb60870f630f926d2299b6ebd31fc94714dcd734 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Tue, 11 Aug 2009 14:39:09 +0200
Subject: [ARM] pxa: add MFP_PULL_FLOAT

There is currently an uncovered case for MFP configuration on PXAs which
is selected by setting the PULL_SEL bit but none of the PULL{UP,DOWN}_EN
bits. This case is needed to explicitly let pins float, even if the
selected alternate function would default to a configuration with a pull
resistor enabled.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/plat-pxa/include/plat/mfp.h | 5 +++--
 arch/arm/plat-pxa/mfp.c              | 3 +++
 2 files changed, 6 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h
index 64019464c8d..08ad665460b 100644
--- a/arch/arm/plat-pxa/include/plat/mfp.h
+++ b/arch/arm/plat-pxa/include/plat/mfp.h
@@ -325,8 +325,9 @@ typedef unsigned long mfp_cfg_t;
 #define MFP_PULL_LOW		(0x1 << 21)
 #define MFP_PULL_HIGH		(0x2 << 21)
 #define MFP_PULL_BOTH		(0x3 << 21)
-#define MFP_PULL_MASK		(0x3 << 21)
-#define MFP_PULL(x)		(((x) >> 21) & 0x3)
+#define MFP_PULL_FLOAT		(0x4 << 21)
+#define MFP_PULL_MASK		(0x7 << 21)
+#define MFP_PULL(x)		(((x) >> 21) & 0x7)
 
 #define MFP_CFG_DEFAULT		(MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\
 				 MFP_LPM_EDGE_NONE | MFP_PULL_NONE)
diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c
index e716c622a17..9405d0379c8 100644
--- a/arch/arm/plat-pxa/mfp.c
+++ b/arch/arm/plat-pxa/mfp.c
@@ -77,11 +77,13 @@
  * MFPR_PULL_LOW        1         0        1
  * MFPR_PULL_HIGH       1         1        0
  * MFPR_PULL_BOTH       1         1        1
+ * MFPR_PULL_FLOAT	1         0        0
  */
 #define MFPR_PULL_NONE		(0)
 #define MFPR_PULL_LOW		(MFPR_PULL_SEL | MFPR_PULLDOWN_EN)
 #define MFPR_PULL_BOTH		(MFPR_PULL_LOW | MFPR_PULLUP_EN)
 #define MFPR_PULL_HIGH		(MFPR_PULL_SEL | MFPR_PULLUP_EN)
+#define MFPR_PULL_FLOAT		(MFPR_PULL_SEL)
 
 /* mfp_spin_lock is used to ensure that MFP register configuration
  * (most likely a read-modify-write operation) is atomic, and that
@@ -116,6 +118,7 @@ static const unsigned long mfpr_pull[] = {
 	MFPR_PULL_LOW,
 	MFPR_PULL_HIGH,
 	MFPR_PULL_BOTH,
+	MFPR_PULL_FLOAT,
 };
 
 /* mapping of MFP_LPM_EDGE_* definitions to MFPR_EDGE_* register bits */
-- 
cgit v1.2.3


From 063936df925f54a32649490f828af9af66ef8c8e Mon Sep 17 00:00:00 2001
From: Haojian Zhuang <haojian.zhuang@marvell.com>
Date: Wed, 17 Jun 2009 13:57:40 +0800
Subject: [ARM] pxa: support mfp of pxa935

Add and initialize the mfp setting of pxa935 chip.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/pxa930.c           | 19 +++++++++-
 arch/arm/plat-pxa/include/plat/mfp.h | 68 ++++++++++++++++++++++++++++++++++++
 2 files changed, 86 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c
index 71131742fff..06429200828 100644
--- a/arch/arm/mach-pxa/pxa930.c
+++ b/arch/arm/mach-pxa/pxa930.c
@@ -176,13 +176,30 @@ static struct mfp_addr_map pxa930_mfp_addr_map[] __initdata = {
 	MFP_ADDR_END,
 };
 
+static struct mfp_addr_map pxa935_mfp_addr_map[] __initdata = {
+	MFP_ADDR(GPIO159, 0x0524),
+	MFP_ADDR(GPIO163, 0x0534),
+	MFP_ADDR(GPIO167, 0x0544),
+	MFP_ADDR(GPIO168, 0x0548),
+	MFP_ADDR(GPIO169, 0x054c),
+	MFP_ADDR(GPIO170, 0x0550),
+	MFP_ADDR(GPIO171, 0x0554),
+	MFP_ADDR(GPIO172, 0x0558),
+	MFP_ADDR(GPIO173, 0x055c),
+
+	MFP_ADDR_END,
+};
+
 static int __init pxa930_init(void)
 {
-	if (cpu_is_pxa930()) {
+	if (cpu_is_pxa930() || cpu_is_pxa935()) {
 		mfp_init_base(io_p2v(MFPR_BASE));
 		mfp_init_addr(pxa930_mfp_addr_map);
 	}
 
+	if (cpu_is_pxa935())
+		mfp_init_addr(pxa935_mfp_addr_map);
+
 	return 0;
 }
 
diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h
index 08ad665460b..22086e696e8 100644
--- a/arch/arm/plat-pxa/include/plat/mfp.h
+++ b/arch/arm/plat-pxa/include/plat/mfp.h
@@ -150,6 +150,74 @@ enum {
 	MFP_PIN_GPIO125,
 	MFP_PIN_GPIO126,
 	MFP_PIN_GPIO127,
+
+	MFP_PIN_GPIO128,
+	MFP_PIN_GPIO129,
+	MFP_PIN_GPIO130,
+	MFP_PIN_GPIO131,
+	MFP_PIN_GPIO132,
+	MFP_PIN_GPIO133,
+	MFP_PIN_GPIO134,
+	MFP_PIN_GPIO135,
+	MFP_PIN_GPIO136,
+	MFP_PIN_GPIO137,
+	MFP_PIN_GPIO138,
+	MFP_PIN_GPIO139,
+	MFP_PIN_GPIO140,
+	MFP_PIN_GPIO141,
+	MFP_PIN_GPIO142,
+	MFP_PIN_GPIO143,
+	MFP_PIN_GPIO144,
+	MFP_PIN_GPIO145,
+	MFP_PIN_GPIO146,
+	MFP_PIN_GPIO147,
+	MFP_PIN_GPIO148,
+	MFP_PIN_GPIO149,
+	MFP_PIN_GPIO150,
+	MFP_PIN_GPIO151,
+	MFP_PIN_GPIO152,
+	MFP_PIN_GPIO153,
+	MFP_PIN_GPIO154,
+	MFP_PIN_GPIO155,
+	MFP_PIN_GPIO156,
+	MFP_PIN_GPIO157,
+	MFP_PIN_GPIO158,
+	MFP_PIN_GPIO159,
+	MFP_PIN_GPIO160,
+	MFP_PIN_GPIO161,
+	MFP_PIN_GPIO162,
+	MFP_PIN_GPIO163,
+	MFP_PIN_GPIO164,
+	MFP_PIN_GPIO165,
+	MFP_PIN_GPIO166,
+	MFP_PIN_GPIO167,
+	MFP_PIN_GPIO168,
+	MFP_PIN_GPIO169,
+	MFP_PIN_GPIO170,
+	MFP_PIN_GPIO171,
+	MFP_PIN_GPIO172,
+	MFP_PIN_GPIO173,
+	MFP_PIN_GPIO174,
+	MFP_PIN_GPIO175,
+	MFP_PIN_GPIO176,
+	MFP_PIN_GPIO177,
+	MFP_PIN_GPIO178,
+	MFP_PIN_GPIO179,
+	MFP_PIN_GPIO180,
+	MFP_PIN_GPIO181,
+	MFP_PIN_GPIO182,
+	MFP_PIN_GPIO183,
+	MFP_PIN_GPIO184,
+	MFP_PIN_GPIO185,
+	MFP_PIN_GPIO186,
+	MFP_PIN_GPIO187,
+	MFP_PIN_GPIO188,
+	MFP_PIN_GPIO189,
+	MFP_PIN_GPIO190,
+	MFP_PIN_GPIO191,
+
+	MFP_PIN_GPIO255 = 255,
+
 	MFP_PIN_GPIO0_2,
 	MFP_PIN_GPIO1_2,
 	MFP_PIN_GPIO2_2,
-- 
cgit v1.2.3


From 9db95cb6c430b3d9b8abbd5870e0d1e69b884ba0 Mon Sep 17 00:00:00 2001
From: Haojian Zhuang <haojian.zhuang@marvell.com>
Date: Mon, 31 Aug 2009 17:23:44 +0800
Subject: [ARM] pxa: expand irq support for PXA93x and PXA950

PXA93x/950 has additional 64 GPIOs, each is a secondary interrupt
source for IRQ_GPIO_2_x, extend PXA_GPIO_IRQ_{BASE,NUM}.

PXA93x/950 specific IRQ definitions are added as well.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/include/mach/irqs.h | 28 ++++++++++++++++++++++++++--
 1 file changed, 26 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index 6a1d9599334..abd2c2cf213 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -68,6 +68,7 @@
 #ifdef CONFIG_PXA3xx
 #define IRQ_SSP4	PXA_IRQ(13)	/* SSP4 service request */
 #define IRQ_CIR		PXA_IRQ(34)	/* Consumer IR */
+#define IRQ_COMM_WDT	PXA_IRQ(35) 	/* Comm WDT interrupt */
 #define IRQ_TSI		PXA_IRQ(36)	/* Touch Screen Interface (PXA320) */
 #define IRQ_USIM2	PXA_IRQ(38)	/* USIM2 Controller */
 #define IRQ_GRPHICS	PXA_IRQ(39)	/* Graphics Controller */
@@ -81,8 +82,31 @@
 #define IRQ_MMC3	PXA_IRQ(55)	/* MMC3 Controller (PXA310) */
 #endif
 
-#define PXA_GPIO_IRQ_BASE	PXA_IRQ(64)
-#define PXA_GPIO_IRQ_NUM	(128)
+#ifdef CONFIG_CPU_PXA935
+#define IRQ_U2O		PXA_IRQ(64)	/* USB OTG 2.0 Controller (PXA935) */
+#define IRQ_U2H		PXA_IRQ(65)	/* USB Host 2.0 Controller (PXA935) */
+
+#define IRQ_MMC3_PXA935	PXA_IRQ(72)	/* MMC3 Controller (PXA935) */
+#define IRQ_MMC4_PXA935	PXA_IRQ(73)	/* MMC4 Controller (PXA935) */
+#define IRQ_MMC5_PXA935	PXA_IRQ(74)	/* MMC5 Controller (PXA935) */
+
+#define IRQ_U2P		PXA_IRQ(93)	/* USB PHY D+/D- Lines (PXA935) */
+#endif
+
+#ifdef CONFIG_CPU_PXA930
+#define IRQ_ENHROT	PXA_IRQ(37)	/* Enhanced Rotary (PXA930) */
+#define IRQ_ACIPC0	PXA_IRQ(5)
+#define IRQ_ACIPC1	PXA_IRQ(40)
+#define IRQ_ACIPC2	PXA_IRQ(19)
+#define IRQ_TRKBALL	PXA_IRQ(43)	/* Track Ball */
+#endif
+
+#ifdef CONFIG_CPU_PXA950
+#define IRQ_GC500	PXA_IRQ(70)	/* Graphics Controller (PXA950) */
+#endif
+
+#define PXA_GPIO_IRQ_BASE	PXA_IRQ(96)
+#define PXA_GPIO_IRQ_NUM	(192)
 
 #define GPIO_2_x_TO_IRQ(x)	(PXA_GPIO_IRQ_BASE + (x))
 #define IRQ_GPIO(x)	(((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x))
-- 
cgit v1.2.3


From 337c1db645bce3f5a832129c4a803dc157ac7e9a Mon Sep 17 00:00:00 2001
From: Haojian Zhuang <haojian.zhuang@marvell.com>
Date: Fri, 21 Aug 2009 16:10:41 +0800
Subject: [ARM] pxa: update cpu_is_xsc3() to include Marvell CPUID

CPU id is changed in Marvell chip. So update the code in cpu_is_xsc3().

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/include/asm/cputype.h | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
index b3e656c6fb7..7c6e208a7de 100644
--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@@ -73,7 +73,10 @@ static inline unsigned int __attribute_const__ read_cpuid_cachetype(void)
 #else
 static inline int cpu_is_xsc3(void)
 {
-	if ((read_cpuid_id() & 0xffffe000) == 0x69056000)
+	unsigned int id;
+	id = read_cpuid_id() & 0xffffe000;
+	/* It covers both Intel ID and Marvell ID */
+	if ((id == 0x69056000) || (id == 0x56056000))
 		return 1;
 
 	return 0;
-- 
cgit v1.2.3


From 4646dd2795e793f97b7fd40206567bf72e6cdf21 Mon Sep 17 00:00:00 2001
From: Haojian Zhuang <haojian.zhuang@marvell.com>
Date: Wed, 26 Aug 2009 10:32:00 +0800
Subject: [ARM] pxa: add cpu_is_pxa950() and Kconfig options

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/Kconfig                 |  5 +++++
 arch/arm/mach-pxa/include/mach/hardware.h | 17 +++++++++++++++++
 2 files changed, 22 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 89c992b8f75..626cecb6e73 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -21,6 +21,11 @@ config CPU_PXA930
 
 config CPU_PXA935
 	bool "PXA935 (codename Tavor-P65)"
+	select CPU_PXA930
+
+config CPU_PXA950
+	bool "PXA950 (codename Tavor-PV2)"
+	select CPU_PXA930
 
 endmenu
 
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index 16ab79547da..aa3d9f70a08 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -197,6 +197,16 @@
 #define __cpu_is_pxa935(id)	(0)
 #endif
 
+#ifdef CONFIG_CPU_PXA950
+#define __cpu_is_pxa950(id)                             \
+	({                                              \
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		id == 0x697;				\
+	 })
+#else
+#define __cpu_is_pxa950(id)	(0)
+#endif
+
 #define cpu_is_pxa210()					\
 	({						\
 		__cpu_is_pxa210(read_cpuid_id());	\
@@ -249,6 +259,13 @@
 		__cpu_is_pxa935(id);			\
 	 })
 
+#define cpu_is_pxa950()					\
+	({						\
+		unsigned int id = read_cpuid(CPUID_ID);	\
+		__cpu_is_pxa950(id);			\
+	 })
+
+
 /*
  * CPUID Core Generation Bit
  * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
-- 
cgit v1.2.3


From 6ba39282bb3ee486a142ee3fd61196d329622ed9 Mon Sep 17 00:00:00 2001
From: Haojian Zhuang <haojian.zhuang@marvell.com>
Date: Wed, 19 Aug 2009 19:30:24 +0800
Subject: [ARM] pxa: add more registers in interrupt controller

Add priority registers and new registers of pxa935.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/include/mach/regs-intc.h | 11 +++++++++++
 1 file changed, 11 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/include/mach/regs-intc.h b/arch/arm/mach-pxa/include/mach/regs-intc.h
index ad23e74b762..68464ce1c1e 100644
--- a/arch/arm/mach-pxa/include/mach/regs-intc.h
+++ b/arch/arm/mach-pxa/include/mach/regs-intc.h
@@ -13,6 +13,7 @@
 #define ICFP		__REG(0x40D0000C)  /* Interrupt Controller FIQ Pending Register */
 #define ICPR		__REG(0x40D00010)  /* Interrupt Controller Pending Register */
 #define ICCR		__REG(0x40D00014)  /* Interrupt Controller Control Register */
+#define ICHP		__REG(0x40D00018)  /* Interrupt Controller Highest Priority Register */
 
 #define ICIP2		__REG(0x40D0009C)  /* Interrupt Controller IRQ Pending Register 2 */
 #define ICMR2		__REG(0x40D000A0)  /* Interrupt Controller Mask Register 2 */
@@ -20,4 +21,14 @@
 #define ICFP2		__REG(0x40D000A8)  /* Interrupt Controller FIQ Pending Register 2 */
 #define ICPR2		__REG(0x40D000AC)  /* Interrupt Controller Pending Register 2 */
 
+#define ICIP3		__REG(0x40D00130)  /* Interrupt Controller IRQ Pending Register 3 */
+#define ICMR3		__REG(0x40D00134)  /* Interrupt Controller Mask Register 3 */
+#define ICLR3		__REG(0x40D00138)  /* Interrupt Controller Level Register 3 */
+#define ICFP3		__REG(0x40D0013C)  /* Interrupt Controller FIQ Pending Register 3 */
+#define ICPR3		__REG(0x40D00140)  /* Interrupt Controller Pending Register 3 */
+
+#define IPR(x)		__REG(0x40D0001C + (x < 32 ? (x << 2)		\
+				: (x < 64 ? (0x94 + ((x - 32) << 2))	\
+				: (0x128 + ((x - 64) << 2)))))
+
 #endif /* __ASM_MACH_REGS_INTC_H */
-- 
cgit v1.2.3


From d2c37068429b29d6549cf3486fc84b836689e122 Mon Sep 17 00:00:00 2001
From: Haojian Zhuang <haojian.zhuang@marvell.com>
Date: Wed, 19 Aug 2009 19:49:31 +0800
Subject: [ARM] pxa: initialize default interrupt priority and use ICHP for IRQ
 handling

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/include/mach/entry-macro.S | 25 +++++++++----------------
 arch/arm/mach-pxa/irq.c                      |  8 +++++++-
 2 files changed, 16 insertions(+), 17 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/include/mach/entry-macro.S b/arch/arm/mach-pxa/include/mach/entry-macro.S
index f6b4bf3e73d..241880608ac 100644
--- a/arch/arm/mach-pxa/include/mach/entry-macro.S
+++ b/arch/arm/mach-pxa/include/mach/entry-macro.S
@@ -24,34 +24,27 @@
 		mov	\tmp, \tmp, lsr #13
 		and	\tmp, \tmp, #0x7		@ Core G
 		cmp	\tmp, #1
-		bhi	1004f
+		bhi	1002f
 
+		@ Core Generation 1 (PXA25x)
 		mov	\base, #io_p2v(0x40000000)	@ IIR Ctl = 0x40d00000
 		add	\base, \base, #0x00d00000
 		ldr	\irqstat, [\base, #0]		@ ICIP
 		ldr	\irqnr, [\base, #4]		@ ICMR
-		b	1002f
 
-1004:
-		mrc	p6, 0, \irqstat, c6, c0, 0	@ ICIP2
-		mrc	p6, 0, \irqnr, c7, c0, 0	@ ICMR2
 		ands	\irqnr, \irqstat, \irqnr
-		beq	1003f
+		beq	1001f
 		rsb	\irqstat, \irqnr, #0
 		and	\irqstat, \irqstat, \irqnr
 		clz	\irqnr, \irqstat
-		rsb	\irqnr, \irqnr, #31
-		add	\irqnr, \irqnr, #(32 + PXA_IRQ(0))
+		rsb	\irqnr, \irqnr, #(31 + PXA_IRQ(0))
 		b	1001f
-1003:
-		mrc	p6, 0, \irqstat, c0, c0, 0	@ ICIP
-		mrc	p6, 0, \irqnr, c1, c0, 0	@ ICMR
 1002:
-		ands	\irqnr, \irqstat, \irqnr
+		@ Core Generation 2 (PXA27x) or Core Generation 3 (PXA3xx)
+		mrc	p6, 0, \irqstat, c5, c0, 0	@ ICHP
+		tst	\irqstat, #0x80000000
 		beq	1001f
-		rsb	\irqstat, \irqnr, #0
-		and	\irqstat, \irqstat, \irqnr
-		clz	\irqnr, \irqstat
-		rsb	\irqnr, \irqnr, #(31 + PXA_IRQ(0))
+		bic	\irqstat, \irqstat, #0x80000000
+		mov	\irqnr, \irqstat, lsr #16
 1001:
 		.endm
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index f6e0300e4f6..d694ce28966 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -120,7 +120,7 @@ static void __init pxa_init_low_gpio_irq(set_wake_t fn)
 
 void __init pxa_init_irq(int irq_nr, set_wake_t fn)
 {
-	int irq;
+	int irq, i;
 
 	pxa_internal_irq_nr = irq_nr;
 
@@ -129,6 +129,12 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn)
 		_ICLR(irq) = 0;	/* all IRQs are IRQ, not FIQ */
 	}
 
+	/* initialize interrupt priority */
+	if (cpu_is_pxa27x() || cpu_is_pxa3xx()) {
+		for (i = 0; i < irq_nr; i++)
+			IPR(i) = i | (1 << 31);
+	}
+
 	/* only unmasked interrupts kick us out of idle */
 	ICCR = 1;
 
-- 
cgit v1.2.3


From f0f04f0840e41411895056bece50bfbd5dfc81cc Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Thu, 9 Jul 2009 19:04:48 +0200
Subject: [ARM] pxa: add clock definition for graphics controller

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/include/mach/pxa3xx-regs.h | 4 ++--
 arch/arm/mach-pxa/pxa300.c                   | 2 ++
 arch/arm/mach-pxa/pxa320.c                   | 2 ++
 3 files changed, 6 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
index 7d1a059b3d4..e91d63cfe81 100644
--- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
@@ -208,7 +208,7 @@
 #define CKEN_MVED	43	/* < MVED clock enable */
 
 /* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */
-#define PXA300_CKEN_GRAPHICS	42	/* Graphics controller clock enable */
-#define PXA320_CKEN_GRAPHICS	7	/* Graphics controller clock enable */
+#define CKEN_PXA300_GCU		42	/* Graphics controller clock enable */
+#define CKEN_PXA320_GCU		7	/* Graphics controller clock enable */
 
 #endif /* __ASM_ARCH_PXA3XX_REGS_H */
diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
index 4ba6d21f851..f4af6e2bef8 100644
--- a/arch/arm/mach-pxa/pxa300.c
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -84,9 +84,11 @@ static struct mfp_addr_map pxa310_mfp_addr_map[] __initdata = {
 };
 
 static DEFINE_PXA3_CKEN(common_nand, NAND, 156000000, 0);
+static DEFINE_PXA3_CKEN(gcu, PXA300_GCU, 0, 0);
 
 static struct clk_lookup common_clkregs[] = {
 	INIT_CLKREG(&clk_common_nand, "pxa3xx-nand", NULL),
+	INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL),
 };
 
 static DEFINE_PXA3_CKEN(pxa310_mmc3, MMC3, 19500000, 0);
diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c
index 8b3d97efada..c7373e74a10 100644
--- a/arch/arm/mach-pxa/pxa320.c
+++ b/arch/arm/mach-pxa/pxa320.c
@@ -78,9 +78,11 @@ static struct mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
 };
 
 static DEFINE_PXA3_CKEN(pxa320_nand, NAND, 104000000, 0);
+static DEFINE_PXA3_CKEN(gcu, PXA320_GCU, 0, 0);
 
 static struct clk_lookup pxa320_clkregs[] = {
 	INIT_CLKREG(&clk_pxa320_nand, "pxa3xx-nand", NULL),
+	INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL),
 };
 
 static int __init pxa320_init(void)
-- 
cgit v1.2.3


From 1ff2c33e197f0a65e4641b2dbac1a8c85f5204dd Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Thu, 9 Jul 2009 19:04:49 +0200
Subject: [ARM] pxa: add device definition for graphics controller

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/devices.c | 27 +++++++++++++++++++++++++++
 arch/arm/mach-pxa/devices.h |  2 ++
 2 files changed, 29 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index ecc08f360b6..46fabe1cca1 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -935,6 +935,33 @@ void __init pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info)
 {
 	pxa_register_device(&pxa3xx_device_nand, info);
 }
+
+static struct resource pxa3xx_resources_gcu[] = {
+	{
+		.start	= 0x54000000,
+		.end	= 0x54000fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_GCU,
+		.end	= IRQ_GCU,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 pxa3xx_gcu_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device pxa3xx_device_gcu = {
+	.name		= "pxa3xx-gcu",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(pxa3xx_resources_gcu),
+	.resource	= pxa3xx_resources_gcu,
+	.dev		= {
+		.dma_mask = &pxa3xx_gcu_dmamask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+};
+
 #endif /* CONFIG_PXA3xx */
 
 /* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index ecc24a4dca6..93817d99761 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -35,4 +35,6 @@ extern struct platform_device pxa27x_device_pwm1;
 extern struct platform_device pxa3xx_device_nand;
 extern struct platform_device pxa3xx_device_i2c_power;
 
+extern struct platform_device pxa3xx_device_gcu;
+
 void __init pxa_register_device(struct platform_device *dev, void *data);
-- 
cgit v1.2.3


From 17e513ec79f9524f737f367a1efe97489aff9546 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Thu, 9 Jul 2009 19:04:50 +0200
Subject: [ARM] pxa: rename GCU IRQ for consistency

For consistency reasons, rename IRQ_GRPHICS to IRQ_GCU.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/include/mach/irqs.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index abd2c2cf213..7af0de4bf65 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -71,7 +71,7 @@
 #define IRQ_COMM_WDT	PXA_IRQ(35) 	/* Comm WDT interrupt */
 #define IRQ_TSI		PXA_IRQ(36)	/* Touch Screen Interface (PXA320) */
 #define IRQ_USIM2	PXA_IRQ(38)	/* USIM2 Controller */
-#define IRQ_GRPHICS	PXA_IRQ(39)	/* Graphics Controller */
+#define IRQ_GCU		PXA_IRQ(39)	/* Graphics Controller */
 #define IRQ_MMC2	PXA_IRQ(41)	/* MMC2 Controller */
 #define IRQ_1WIRE	PXA_IRQ(44)	/* 1-Wire Controller */
 #define IRQ_NAND	PXA_IRQ(45)	/* NAND Controller */
-- 
cgit v1.2.3


From 36714c935a5d4125c6ccd013484de725dc09b387 Mon Sep 17 00:00:00 2001
From: Haojian Zhuang <haojian.zhuang@marvell.com>
Date: Wed, 1 Jul 2009 14:17:16 +0800
Subject: [ARM] pxa: merge {zylonite,littleton}_defconfig into pxa3xx_defconfig

Merge zylonite_defconfig and littleton_defconfig into pxa3xx_defconfig.
Since they're similar platform and servicing for same SoC family.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/configs/littleton_defconfig |  783 --------------------
 arch/arm/configs/pxa3xx_defconfig    | 1332 ++++++++++++++++++++++++++++++++++
 arch/arm/configs/zylonite_defconfig  |  736 -------------------
 3 files changed, 1332 insertions(+), 1519 deletions(-)
 delete mode 100644 arch/arm/configs/littleton_defconfig
 create mode 100644 arch/arm/configs/pxa3xx_defconfig
 delete mode 100644 arch/arm/configs/zylonite_defconfig

(limited to 'arch/arm')

diff --git a/arch/arm/configs/littleton_defconfig b/arch/arm/configs/littleton_defconfig
deleted file mode 100644
index 1db49690805..00000000000
--- a/arch/arm/configs/littleton_defconfig
+++ /dev/null
@@ -1,783 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc5
-# Fri Dec 21 11:06:19 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Supported PXA3xx Processor Variants
-#
-CONFIG_CPU_PXA300=y
-CONFIG_CPU_PXA310=y
-# CONFIG_CPU_PXA320 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_ZYLONITE is not set
-CONFIG_MACH_LITTLETON=y
-# CONFIG_MACH_ARMCORE is not set
-CONFIG_PXA3xx=y
-CONFIG_PXA_SSP=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
-# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=64M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/pxa3xx_defconfig b/arch/arm/configs/pxa3xx_defconfig
new file mode 100644
index 00000000000..733b851e5b7
--- /dev/null
+++ b/arch/arm/configs/pxa3xx_defconfig
@@ -0,0 +1,1332 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc1
+# Mon Jul 13 22:48:49 2009
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_CLASSIC_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+
+#
+# Supported PXA3xx Processor Variants
+#
+CONFIG_CPU_PXA300=y
+CONFIG_CPU_PXA310=y
+CONFIG_CPU_PXA320=y
+CONFIG_CPU_PXA930=y
+CONFIG_CPU_PXA935=y
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_MACH_STARGATE2 is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_COLIBRI300 is not set
+# CONFIG_MACH_COLIBRI320 is not set
+CONFIG_MACH_ZYLONITE=y
+CONFIG_MACH_LITTLETON=y
+CONFIG_MACH_TAVOREVB=y
+CONFIG_MACH_SAAR=y
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_H4700 is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_MACH_CSB726 is not set
+# CONFIG_PXA_EZX is not set
+CONFIG_PXA3xx=y
+CONFIG_PXA_SSP=y
+CONFIG_PXA_HAVE_BOARD_IRQS=y
+CONFIG_PLAT_PXA=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSC3=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_IO_36=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_XSC3L2=y
+CONFIG_IWMMXT=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=64M debug"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_H1900 is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_SHARPSL is not set
+CONFIG_MTD_NAND_PXA3xx=y
+CONFIG_MTD_NAND_PXA3xx_BUILTIN=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+CONFIG_KEYBOARD_PXA27x=y
+CONFIG_KEYBOARD_PXA930_ROTARY=y
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+CONFIG_MOUSE_PXA930_TRKBALL=y
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+CONFIG_TOUCHSCREEN_DA9034=y
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+# CONFIG_I2C_HELPER_AUTO is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_PXA2XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+CONFIG_GPIO_MAX732X=y
+CONFIG_GPIO_PCA953X=y
+CONFIG_GPIO_PCF857X=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_GPIO_MAX7301=y
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+CONFIG_POWER_SUPPLY_DEBUG=y
+CONFIG_PDA_POWER=y
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+CONFIG_BATTERY_DA9030=y
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+CONFIG_PMIC_DA903X=y
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_OVERLAY is not set
+# CONFIG_FB_PXA_SMARTPANEL is not set
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+CONFIG_LCD_TDO24M=y
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
+CONFIG_BACKLIGHT_DA903X=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+CONFIG_FONT_6x11=y
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA955X is not set
+CONFIG_LEDS_DA903X=m
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_PWM is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DEBUG=y
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_DA903X=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_FS_WBUF_VERIFY=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/zylonite_defconfig b/arch/arm/configs/zylonite_defconfig
deleted file mode 100644
index 7949d04a360..00000000000
--- a/arch/arm/configs/zylonite_defconfig
+++ /dev/null
@@ -1,736 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Tue Oct 23 13:33:20 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=18
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Supported PXA3xx Processor Variants
-#
-CONFIG_CPU_PXA300=y
-CONFIG_CPU_PXA310=y
-CONFIG_CPU_PXA320=y
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-CONFIG_MACH_ZYLONITE=y
-# CONFIG_MACH_ARMCORE is not set
-CONFIG_PXA3xx=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
-# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfs/rootfs/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,38400 mem=64M debug"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-CONFIG_FONT_6x11=y
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-- 
cgit v1.2.3


From 43c6342b1562cc27d8ba1240220cb887ad0e36f0 Mon Sep 17 00:00:00 2001
From: Robert Jarzmik <robert.jarzmik@free.fr>
Date: Sat, 8 Aug 2009 23:07:20 +0200
Subject: [ARM] pxa/dma: cosmetic move of EXPORT_SYMBOL under their functions

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/plat-pxa/dma.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-pxa/dma.c b/arch/arm/plat-pxa/dma.c
index 70aeee407f7..897663dbc5f 100644
--- a/arch/arm/plat-pxa/dma.c
+++ b/arch/arm/plat-pxa/dma.c
@@ -71,6 +71,7 @@ int pxa_request_dma (char *name, pxa_dma_prio prio,
 	local_irq_restore(flags);
 	return i;
 }
+EXPORT_SYMBOL(pxa_request_dma);
 
 void pxa_free_dma (int dma_ch)
 {
@@ -88,6 +89,7 @@ void pxa_free_dma (int dma_ch)
 	dma_channels[dma_ch].name = NULL;
 	local_irq_restore(flags);
 }
+EXPORT_SYMBOL(pxa_free_dma);
 
 static irqreturn_t dma_irq_handler(int irq, void *dev_id)
 {
@@ -139,6 +141,3 @@ int __init pxa_init_dma(int irq, int num_ch)
 	num_dma_channels = num_ch;
 	return 0;
 }
-
-EXPORT_SYMBOL(pxa_request_dma);
-EXPORT_SYMBOL(pxa_free_dma);
-- 
cgit v1.2.3


From d46f5e4a20867da84d12a35407cf7dcc8713c9cc Mon Sep 17 00:00:00 2001
From: Robert Jarzmik <robert.jarzmik@free.fr>
Date: Sat, 8 Aug 2009 23:07:21 +0200
Subject: [ARM] pxa/dma: optimize irq handler loop

Reduce loop for dma irq handler callbacks to the minimum
required.

Since V1: included suggestion from Nicolas Pitre to improve
even further the loop.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/plat-pxa/dma.c | 29 +++++++++++++++--------------
 1 file changed, 15 insertions(+), 14 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-pxa/dma.c b/arch/arm/plat-pxa/dma.c
index 897663dbc5f..56b51cf0718 100644
--- a/arch/arm/plat-pxa/dma.c
+++ b/arch/arm/plat-pxa/dma.c
@@ -94,20 +94,21 @@ EXPORT_SYMBOL(pxa_free_dma);
 static irqreturn_t dma_irq_handler(int irq, void *dev_id)
 {
 	int i, dint = DINT;
-
-	for (i = 0; i < num_dma_channels; i++) {
-		if (dint & (1 << i)) {
-			struct dma_channel *channel = &dma_channels[i];
-			if (channel->name && channel->irq_handler) {
-				channel->irq_handler(i, channel->data);
-			} else {
-				/*
-				 * IRQ for an unregistered DMA channel:
-				 * let's clear the interrupts and disable it.
-				 */
-				printk (KERN_WARNING "spurious IRQ for DMA channel %d\n", i);
-				DCSR(i) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR;
-			}
+	struct dma_channel *channel;
+
+	while (dint) {
+		i = __ffs(dint);
+		dint &= (dint - 1);
+		channel = &dma_channels[i];
+		if (channel->name && channel->irq_handler) {
+			channel->irq_handler(i, channel->data);
+		} else {
+			/*
+			 * IRQ for an unregistered DMA channel:
+			 * let's clear the interrupts and disable it.
+			 */
+			printk (KERN_WARNING "spurious IRQ for DMA channel %d\n", i);
+			DCSR(i) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR;
 		}
 	}
 	return IRQ_HANDLED;
-- 
cgit v1.2.3


From d294948c2ce4e1c85f452154469752cc9b8e876d Mon Sep 17 00:00:00 2001
From: Robert Jarzmik <robert.jarzmik@free.fr>
Date: Sat, 8 Aug 2009 23:07:22 +0200
Subject: [ARM] pxa/dma: add debugfs entries

Add some debug information for PXA DMA :
 - descriptors queued
 - channels state
 - global state

--
Since V1: reverted to old register access (no more dma_readl() or dma_writel()).

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/plat-pxa/dma.c | 249 +++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 248 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-pxa/dma.c b/arch/arm/plat-pxa/dma.c
index 56b51cf0718..2975798d411 100644
--- a/arch/arm/plat-pxa/dma.c
+++ b/arch/arm/plat-pxa/dma.c
@@ -17,22 +17,266 @@
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/errno.h>
+#include <linux/dma-mapping.h>
 
 #include <asm/system.h>
 #include <asm/irq.h>
+#include <asm/memory.h>
 #include <mach/hardware.h>
 #include <mach/dma.h>
 
+#define DMA_DEBUG_NAME		"pxa_dma"
+#define DMA_MAX_REQUESTERS	64
+
 struct dma_channel {
 	char *name;
 	pxa_dma_prio prio;
 	void (*irq_handler)(int, void *);
 	void *data;
+	spinlock_t lock;
 };
 
 static struct dma_channel *dma_channels;
 static int num_dma_channels;
 
+/*
+ * Debug fs
+ */
+#ifdef CONFIG_DEBUG_FS
+#include <linux/debugfs.h>
+#include <linux/uaccess.h>
+#include <linux/seq_file.h>
+
+static struct dentry *dbgfs_root, *dbgfs_state, **dbgfs_chan;
+
+static int dbg_show_requester_chan(struct seq_file *s, void *p)
+{
+	int pos = 0;
+	int chan = (int)s->private;
+	int i;
+	u32 drcmr;
+
+	pos += seq_printf(s, "DMA channel %d requesters list :\n", chan);
+	for (i = 0; i < DMA_MAX_REQUESTERS; i++) {
+		drcmr = DRCMR(i);
+		if ((drcmr & DRCMR_CHLNUM) == chan)
+			pos += seq_printf(s, "\tRequester %d (MAPVLD=%d)\n", i,
+					  !!(drcmr & DRCMR_MAPVLD));
+	}
+	return pos;
+}
+
+static inline int dbg_burst_from_dcmd(u32 dcmd)
+{
+	int burst = (dcmd >> 16) & 0x3;
+
+	return burst ? 4 << burst : 0;
+}
+
+static int is_phys_valid(unsigned long addr)
+{
+	return pfn_valid(__phys_to_pfn(addr));
+}
+
+#define DCSR_STR(flag) (dcsr & DCSR_##flag ? #flag" " : "")
+#define DCMD_STR(flag) (dcmd & DCMD_##flag ? #flag" " : "")
+
+static int dbg_show_descriptors(struct seq_file *s, void *p)
+{
+	int pos = 0;
+	int chan = (int)s->private;
+	int i, max_show = 20, burst, width;
+	u32 dcmd;
+	unsigned long phys_desc;
+	struct pxa_dma_desc *desc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dma_channels[chan].lock, flags);
+	phys_desc = DDADR(chan);
+
+	pos += seq_printf(s, "DMA channel %d descriptors :\n", chan);
+	pos += seq_printf(s, "[%03d] First descriptor unknown\n", 0);
+	for (i = 1; i < max_show && is_phys_valid(phys_desc); i++) {
+		desc = phys_to_virt(phys_desc);
+		dcmd = desc->dcmd;
+		burst = dbg_burst_from_dcmd(dcmd);
+		width = (1 << ((dcmd >> 14) & 0x3)) >> 1;
+
+		pos += seq_printf(s, "[%03d] Desc at %08lx(virt %p)\n",
+				  i, phys_desc, desc);
+		pos += seq_printf(s, "\tDDADR = %08x\n", desc->ddadr);
+		pos += seq_printf(s, "\tDSADR = %08x\n", desc->dsadr);
+		pos += seq_printf(s, "\tDTADR = %08x\n", desc->dtadr);
+		pos += seq_printf(s, "\tDCMD  = %08x (%s%s%s%s%s%s%sburst=%d"
+				  " width=%d len=%d)\n",
+				  dcmd,
+				  DCMD_STR(INCSRCADDR), DCMD_STR(INCTRGADDR),
+				  DCMD_STR(FLOWSRC), DCMD_STR(FLOWTRG),
+				  DCMD_STR(STARTIRQEN), DCMD_STR(ENDIRQEN),
+				  DCMD_STR(ENDIAN), burst, width,
+				  dcmd & DCMD_LENGTH);
+		phys_desc = desc->ddadr;
+	}
+	if (i == max_show)
+		pos += seq_printf(s, "[%03d] Desc at %08lx ... max display reached\n",
+				  i, phys_desc);
+	else
+		pos += seq_printf(s, "[%03d] Desc at %08lx is %s\n",
+				  i, phys_desc, phys_desc == DDADR_STOP ?
+				  "DDADR_STOP" : "invalid");
+
+	spin_unlock_irqrestore(&dma_channels[chan].lock, flags);
+	return pos;
+}
+
+static int dbg_show_chan_state(struct seq_file *s, void *p)
+{
+	int pos = 0;
+	int chan = (int)s->private;
+	u32 dcsr, dcmd;
+	int burst, width;
+	static char *str_prio[] = { "high", "normal", "low" };
+
+	dcsr = DCSR(chan);
+	dcmd = DCMD(chan);
+	burst = dbg_burst_from_dcmd(dcmd);
+	width = (1 << ((dcmd >> 14) & 0x3)) >> 1;
+
+	pos += seq_printf(s, "DMA channel %d\n", chan);
+	pos += seq_printf(s, "\tPriority : %s\n",
+			  str_prio[dma_channels[chan].prio]);
+	pos += seq_printf(s, "\tUnaligned transfer bit: %s\n",
+			  DALGN & (1 << chan) ? "yes" : "no");
+	pos += seq_printf(s, "\tDCSR  = %08x (%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s)\n",
+			  dcsr, DCSR_STR(RUN), DCSR_STR(NODESC),
+			  DCSR_STR(STOPIRQEN), DCSR_STR(EORIRQEN),
+			  DCSR_STR(EORJMPEN), DCSR_STR(EORSTOPEN),
+			  DCSR_STR(SETCMPST), DCSR_STR(CLRCMPST),
+			  DCSR_STR(CMPST), DCSR_STR(EORINTR), DCSR_STR(REQPEND),
+			  DCSR_STR(STOPSTATE), DCSR_STR(ENDINTR),
+			  DCSR_STR(STARTINTR), DCSR_STR(BUSERR));
+
+	pos += seq_printf(s, "\tDCMD  = %08x (%s%s%s%s%s%s%sburst=%d width=%d"
+			  " len=%d)\n",
+			  dcmd,
+			  DCMD_STR(INCSRCADDR), DCMD_STR(INCTRGADDR),
+			  DCMD_STR(FLOWSRC), DCMD_STR(FLOWTRG),
+			  DCMD_STR(STARTIRQEN), DCMD_STR(ENDIRQEN),
+			  DCMD_STR(ENDIAN), burst, width, dcmd & DCMD_LENGTH);
+	pos += seq_printf(s, "\tDSADR = %08x\n", DSADR(chan));
+	pos += seq_printf(s, "\tDTADR = %08x\n", DTADR(chan));
+	pos += seq_printf(s, "\tDDADR = %08x\n", DDADR(chan));
+	return pos;
+}
+
+static int dbg_show_state(struct seq_file *s, void *p)
+{
+	int pos = 0;
+
+	/* basic device status */
+	pos += seq_printf(s, "DMA engine status\n");
+	pos += seq_printf(s, "\tChannel number: %d\n", num_dma_channels);
+
+	return pos;
+}
+
+#define DBGFS_FUNC_DECL(name) \
+static int dbg_open_##name(struct inode *inode, struct file *file) \
+{ \
+	return single_open(file, dbg_show_##name, inode->i_private); \
+} \
+static const struct file_operations dbg_fops_##name = { \
+	.owner		= THIS_MODULE, \
+	.open		= dbg_open_##name, \
+	.llseek		= seq_lseek, \
+	.read		= seq_read, \
+	.release	= single_release, \
+}
+
+DBGFS_FUNC_DECL(state);
+DBGFS_FUNC_DECL(chan_state);
+DBGFS_FUNC_DECL(descriptors);
+DBGFS_FUNC_DECL(requester_chan);
+
+static struct dentry *pxa_dma_dbg_alloc_chan(int ch, struct dentry *chandir)
+{
+	char chan_name[11];
+	struct dentry *chan, *chan_state = NULL, *chan_descr = NULL;
+	struct dentry *chan_reqs = NULL;
+	void *dt;
+
+	scnprintf(chan_name, sizeof(chan_name), "%d", ch);
+	chan = debugfs_create_dir(chan_name, chandir);
+	dt = (void *)ch;
+
+	if (chan)
+		chan_state = debugfs_create_file("state", 0400, chan, dt,
+						 &dbg_fops_chan_state);
+	if (chan_state)
+		chan_descr = debugfs_create_file("descriptors", 0400, chan, dt,
+						 &dbg_fops_descriptors);
+	if (chan_descr)
+		chan_reqs = debugfs_create_file("requesters", 0400, chan, dt,
+						&dbg_fops_requester_chan);
+	if (!chan_reqs)
+		goto err_state;
+
+	return chan;
+
+err_state:
+	debugfs_remove_recursive(chan);
+	return NULL;
+}
+
+static void pxa_dma_init_debugfs(void)
+{
+	int i;
+	struct dentry *chandir;
+
+	dbgfs_root = debugfs_create_dir(DMA_DEBUG_NAME, NULL);
+	if (IS_ERR(dbgfs_root) || !dbgfs_root)
+		goto err_root;
+
+	dbgfs_state = debugfs_create_file("state", 0400, dbgfs_root, NULL,
+					  &dbg_fops_state);
+	if (!dbgfs_state)
+		goto err_state;
+
+	dbgfs_chan = kmalloc(sizeof(*dbgfs_state) * num_dma_channels,
+			     GFP_KERNEL);
+	if (!dbgfs_state)
+		goto err_alloc;
+
+	chandir = debugfs_create_dir("channels", dbgfs_root);
+	if (!chandir)
+		goto err_chandir;
+
+	for (i = 0; i < num_dma_channels; i++) {
+		dbgfs_chan[i] = pxa_dma_dbg_alloc_chan(i, chandir);
+		if (!dbgfs_chan[i])
+			goto err_chans;
+	}
+
+	return;
+err_chans:
+err_chandir:
+	kfree(dbgfs_chan);
+err_alloc:
+err_state:
+	debugfs_remove_recursive(dbgfs_root);
+err_root:
+	pr_err("pxa_dma: debugfs is not available\n");
+}
+
+static void __exit pxa_dma_cleanup_debugfs(void)
+{
+	debugfs_remove_recursive(dbgfs_root);
+}
+#else
+static inline void pxa_dma_init_debugfs(void) {}
+static inline void pxa_dma_cleanup_debugfs(void) {}
+#endif
+
 int pxa_request_dma (char *name, pxa_dma_prio prio,
 			void (*irq_handler)(int, void *),
 			void *data)
@@ -130,6 +374,7 @@ int __init pxa_init_dma(int irq, int num_ch)
 	for (i = 0; i < num_ch; i++) {
 		DCSR(i) = 0;
 		dma_channels[i].prio = min((i & 0xf) >> 2, DMA_PRIO_LOW);
+		spin_lock_init(&dma_channels[i].lock);
 	}
 
 	ret = request_irq(irq, dma_irq_handler, IRQF_DISABLED, "DMA", NULL);
@@ -138,7 +383,9 @@ int __init pxa_init_dma(int irq, int num_ch)
 		kfree(dma_channels);
 		return ret;
 	}
-
 	num_dma_channels = num_ch;
+
+	pxa_dma_init_debugfs();
+
 	return 0;
 }
-- 
cgit v1.2.3


From b405db6c015fe8e4c9d8199a0355bb16d95d7049 Mon Sep 17 00:00:00 2001
From: Robert Jarzmik <robert.jarzmik@free.fr>
Date: Tue, 23 Jun 2009 23:21:03 +0200
Subject: [ARM] pxamci: add simple gpio controls

The MMC block needs 3 external datas to work :
 - is the MMC card put in "read-only mode" ?
 - is a MMC card inserted or removed ?
 - enable power towards the MMC card

Several platforms provide these controls through
gpios. Expand the platform_data to request and use these
gpios is set up by board code.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Pierre.Ossman <pierre@ossman.eu>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/include/mach/mmc.h | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/include/mach/mmc.h b/arch/arm/mach-pxa/include/mach/mmc.h
index 6d1304c9270..02a69dc2ee6 100644
--- a/arch/arm/mach-pxa/include/mach/mmc.h
+++ b/arch/arm/mach-pxa/include/mach/mmc.h
@@ -14,6 +14,11 @@ struct pxamci_platform_data {
 	int (*get_ro)(struct device *);
 	void (*setpower)(struct device *, unsigned int);
 	void (*exit)(struct device *, void *);
+	int gpio_card_detect;			/* gpio detecting card insertion */
+	int gpio_card_ro;			/* gpio detecting read only toggle */
+	bool gpio_card_ro_invert;		/* gpio ro is inverted */
+	int gpio_power;				/* gpio powering up MMC bus */
+	bool gpio_power_invert;			/* gpio power is inverted */
 };
 
 extern void pxa_set_mci_info(struct pxamci_platform_data *info);
-- 
cgit v1.2.3


From 7a648256b20c493c99757fe1d248daf7954647bc Mon Sep 17 00:00:00 2001
From: Robert Jarzmik <robert.jarzmik@free.fr>
Date: Mon, 6 Jul 2009 22:16:42 +0200
Subject: [ARM] pxa: factor pxamci gpio handling

Several boards use always the same pattern with pxamci :
request gpio, request irq for that gpio to detect MMC card
insertion, request gpio for read-only mode detection, etc
...

Now that pxamci provides platform_data to describe simple
gpio management of the MMC external controls, use it.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Philipp Zabel <philipp.zabel@gmail.com>
Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: rpurdie@rpsys.net
Cc: drwyrm@gmail.com
Cc: sakoman@gmail.com
Cc: marek.vasut@gmail.com
Cc: s.hauer@pengutronix.de
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/cm-x270.c          | 54 ++--------------------
 arch/arm/mach-pxa/cm-x300.c          | 71 +++++------------------------
 arch/arm/mach-pxa/colibri-pxa3xx.c   | 11 +++--
 arch/arm/mach-pxa/corgi.c            | 75 ++----------------------------
 arch/arm/mach-pxa/csb726.c           | 54 ++--------------------
 arch/arm/mach-pxa/em-x270.c          | 17 ++++---
 arch/arm/mach-pxa/gumstix.c          |  5 +-
 arch/arm/mach-pxa/idp.c              |  5 +-
 arch/arm/mach-pxa/imote2.c           |  3 ++
 arch/arm/mach-pxa/lubbock.c          | 13 ++++--
 arch/arm/mach-pxa/magician.c         | 49 ++++----------------
 arch/arm/mach-pxa/mainstone.c        | 11 +++--
 arch/arm/mach-pxa/mioa701.c          | 68 +++-------------------------
 arch/arm/mach-pxa/palmld.c           | 80 ++------------------------------
 arch/arm/mach-pxa/palmt5.c           | 80 ++------------------------------
 arch/arm/mach-pxa/palmte2.c          | 80 ++------------------------------
 arch/arm/mach-pxa/palmtx.c           | 80 ++------------------------------
 arch/arm/mach-pxa/palmz72.c          | 88 +++---------------------------------
 arch/arm/mach-pxa/pcm990-baseboard.c | 13 ++++--
 arch/arm/mach-pxa/poodle.c           | 53 ++++------------------
 arch/arm/mach-pxa/spitz.c            | 62 +++----------------------
 arch/arm/mach-pxa/tosa.c             | 82 +++------------------------------
 arch/arm/mach-pxa/trizeps4.c         |  3 ++
 arch/arm/mach-pxa/zylonite.c         |  3 ++
 24 files changed, 143 insertions(+), 917 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 1d2cec25391..59292181088 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -271,56 +271,12 @@ static inline void cmx270_init_ohci(void) {}
 #endif
 
 #if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
-static int cmx270_mci_init(struct device *dev,
-			   irq_handler_t cmx270_detect_int,
-			   void *data)
-{
-	int err;
-
-	err = gpio_request(GPIO105_MMC_POWER, "MMC/SD power");
-	if (err) {
-		dev_warn(dev, "power gpio unavailable\n");
-		return err;
-	}
-
-	gpio_direction_output(GPIO105_MMC_POWER, 0);
-
-	err = request_irq(CMX270_MMC_IRQ, cmx270_detect_int,
-			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
-			  "MMC card detect", data);
-	if (err) {
-		gpio_free(GPIO105_MMC_POWER);
-		dev_err(dev, "cmx270_mci_init: MMC/SD: can't"
-			" request MMC card detect IRQ\n");
-	}
-
-	return err;
-}
-
-static void cmx270_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *p_d = dev->platform_data;
-
-	if ((1 << vdd) & p_d->ocr_mask) {
-		dev_dbg(dev, "power on\n");
-		gpio_set_value(GPIO105_MMC_POWER, 0);
-	} else {
-		gpio_set_value(GPIO105_MMC_POWER, 1);
-		dev_dbg(dev, "power off\n");
-	}
-}
-
-static void cmx270_mci_exit(struct device *dev, void *data)
-{
-	free_irq(CMX270_MMC_IRQ, data);
-	gpio_free(GPIO105_MMC_POWER);
-}
-
 static struct pxamci_platform_data cmx270_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 		= cmx270_mci_init,
-	.setpower 	= cmx270_mci_setpower,
-	.exit		= cmx270_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO83_MMC_IRQ,
+	.gpio_card_ro		= -1,
+	.gpio_power		= GPIO105_MMC_POWER,
+	.gpio_power_invert	= 1,
 };
 
 static void __init cmx270_init_mmc(void)
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 465da26591b..aac2cda60e0 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -306,68 +306,21 @@ static void cm_x300_mci_exit(struct device *dev, void *data)
 }
 
 static struct pxamci_platform_data cm_x300_mci_platform_data = {
-	.detect_delay	= 20,
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 		= cm_x300_mci_init,
-	.exit		= cm_x300_mci_exit,
+	.detect_delay		= 20,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init 			= cm_x300_mci_init,
+	.exit			= cm_x300_mci_exit,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
 };
 
-static int cm_x300_mci2_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO85_MMC2_WP);
-}
-
-static int cm_x300_mci2_init(struct device *dev,
-			     irq_handler_t cm_x300_detect_int,
-			     void *data)
-{
-	int err;
-
-	/*
-	 * setup GPIO for CM-X300 MMC controller
-	 */
-	err = gpio_request(GPIO82_MMC2_IRQ, "mmc card detect");
-	if (err)
-		goto err_request_cd;
-	gpio_direction_input(GPIO82_MMC2_IRQ);
-
-	err = gpio_request(GPIO85_MMC2_WP, "mmc write protect");
-	if (err)
-		goto err_request_wp;
-	gpio_direction_input(GPIO85_MMC2_WP);
-
-	err = request_irq(CM_X300_MMC2_IRQ, cm_x300_detect_int,
-			  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-			  "MMC card detect", data);
-	if (err) {
-		printk(KERN_ERR "%s: MMC/SD/SDIO: "
-				"can't request card detect IRQ\n", __func__);
-		goto err_request_irq;
-	}
-
-	return 0;
-
-err_request_irq:
-	gpio_free(GPIO85_MMC2_WP);
-err_request_wp:
-	gpio_free(GPIO82_MMC2_IRQ);
-err_request_cd:
-	return err;
-}
-
-static void cm_x300_mci2_exit(struct device *dev, void *data)
-{
-	free_irq(CM_X300_MMC2_IRQ, data);
-	gpio_free(GPIO82_MMC2_IRQ);
-	gpio_free(GPIO85_MMC2_WP);
-}
-
 static struct pxamci_platform_data cm_x300_mci2_platform_data = {
-	.detect_delay	= 20,
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 		= cm_x300_mci2_init,
-	.exit		= cm_x300_mci2_exit,
-	.get_ro		= cm_x300_mci2_ro,
+	.detect_delay		= 20,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO82_MMC2_IRQ,
+	.gpio_card_ro		= GPIO85_MMC2_WP,
+	.gpio_power		= -1,
 };
 
 static void __init cm_x300_init_mmc(void)
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
index ea34e34f8cd..2c846bbfc43 100644
--- a/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
@@ -95,10 +95,13 @@ static void colibri_pxa3xx_mci_exit(struct device *dev, void *data)
 }
 
 static struct pxamci_platform_data colibri_pxa3xx_mci_platform_data = {
-	.detect_delay	= 20,
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.init		= colibri_pxa3xx_mci_init,
-	.exit		= colibri_pxa3xx_mci_exit,
+	.detect_delay		= 20,
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.init			= colibri_pxa3xx_mci_init,
+	.exit			= colibri_pxa3xx_mci_exit,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
 };
 
 void __init colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin)
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 5363e1aea3f..39a94585f97 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -307,77 +307,11 @@ static struct platform_device corgiled_device = {
  * The card detect interrupt isn't debounced so we delay it by 250ms
  * to give the card a chance to fully insert/eject.
  */
-static struct pxamci_platform_data corgi_mci_platform_data;
-
-static int corgi_mci_init(struct device *dev, irq_handler_t corgi_detect_int, void *data)
-{
-	int err;
-
-	err = gpio_request(CORGI_GPIO_nSD_DETECT, "nSD_DETECT");
-	if (err)
-		goto err_out;
-
-	err = gpio_request(CORGI_GPIO_nSD_WP, "nSD_WP");
-	if (err)
-		goto err_free_1;
-
-	err = gpio_request(CORGI_GPIO_SD_PWR, "SD_PWR");
-	if (err)
-		goto err_free_2;
-
-	gpio_direction_input(CORGI_GPIO_nSD_DETECT);
-	gpio_direction_input(CORGI_GPIO_nSD_WP);
-	gpio_direction_output(CORGI_GPIO_SD_PWR, 0);
-
-	corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250);
-
-	err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int,
-				IRQF_DISABLED | IRQF_TRIGGER_RISING |
-				IRQF_TRIGGER_FALLING,
-				"MMC card detect", data);
-	if (err) {
-		pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n",
-				__func__);
-		goto err_free_3;
-	}
-	return 0;
-
-err_free_3:
-	gpio_free(CORGI_GPIO_SD_PWR);
-err_free_2:
-	gpio_free(CORGI_GPIO_nSD_WP);
-err_free_1:
-	gpio_free(CORGI_GPIO_nSD_DETECT);
-err_out:
-	return err;
-}
-
-static void corgi_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data* p_d = dev->platform_data;
-
-	gpio_set_value(CORGI_GPIO_SD_PWR, ((1 << vdd) & p_d->ocr_mask));
-}
-
-static int corgi_mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(CORGI_GPIO_nSD_WP);
-}
-
-static void corgi_mci_exit(struct device *dev, void *data)
-{
-	free_irq(CORGI_IRQ_GPIO_nSD_DETECT, data);
-	gpio_free(CORGI_GPIO_SD_PWR);
-	gpio_free(CORGI_GPIO_nSD_WP);
-	gpio_free(CORGI_GPIO_nSD_DETECT);
-}
-
 static struct pxamci_platform_data corgi_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 		= corgi_mci_init,
-	.get_ro		= corgi_mci_get_ro,
-	.setpower 	= corgi_mci_setpower,
-	.exit		= corgi_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= CORGI_GPIO_nSD_WP,
+	.gpio_power		= CORGI_GPIO_SD_PWR,
 };
 
 
@@ -636,6 +570,7 @@ static void __init corgi_init(void)
 	corgi_init_spi();
 
  	pxa_set_udc_info(&udc_info);
+	corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 	pxa_set_mci_info(&corgi_mci_platform_data);
 	pxa_set_ficp_info(&corgi_ficp_platform_data);
 	pxa_set_i2c_info(NULL);
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 7d3e1b46e55..79141f86272 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -130,61 +130,17 @@ static struct pxamci_platform_data csb726_mci_data;
 static int csb726_mci_init(struct device *dev,
 		irq_handler_t detect, void *data)
 {
-	int err;
-
 	csb726_mci_data.detect_delay = msecs_to_jiffies(500);
-
-	err = gpio_request(CSB726_GPIO_MMC_DETECT, "MMC detect");
-	if (err)
-		goto err_det_req;
-
-	err = gpio_direction_input(CSB726_GPIO_MMC_DETECT);
-	if (err)
-		goto err_det_dir;
-
-	err = gpio_request(CSB726_GPIO_MMC_RO, "MMC ro");
-	if (err)
-		goto err_ro_req;
-
-	err = gpio_direction_input(CSB726_GPIO_MMC_RO);
-	if (err)
-		goto err_ro_dir;
-
-	err = request_irq(gpio_to_irq(CSB726_GPIO_MMC_DETECT), detect,
-			IRQF_DISABLED, "MMC card detect", data);
-	if (err)
-		goto err_irq;
-
 	return 0;
-
-err_irq:
-err_ro_dir:
-	gpio_free(CSB726_GPIO_MMC_RO);
-err_ro_req:
-err_det_dir:
-	gpio_free(CSB726_GPIO_MMC_DETECT);
-err_det_req:
-	return err;
-}
-
-static int csb726_mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(CSB726_GPIO_MMC_RO);
-}
-
-static void csb726_mci_exit(struct device *dev, void *data)
-{
-	free_irq(gpio_to_irq(CSB726_GPIO_MMC_DETECT), data);
-	gpio_free(CSB726_GPIO_MMC_RO);
-	gpio_free(CSB726_GPIO_MMC_DETECT);
 }
 
 static struct pxamci_platform_data csb726_mci = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init		= csb726_mci_init,
-	.get_ro		= csb726_mci_get_ro,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init			= csb726_mci_init,
 	/* FIXME setpower */
-	.exit		= csb726_mci_exit,
+	.gpio_card_detect	= CSB726_GPIO_MMC_DETECT,
+	.gpio_card_ro		= CSB726_GPIO_MMC_RO,
+	.gpio_power		= -1,
 };
 
 static struct pxaohci_platform_data csb726_ohci_platform_data = {
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 9cd09465a0e..e0121f4fcaf 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -646,13 +646,16 @@ static int em_x270_mci_get_ro(struct device *dev)
 }
 
 static struct pxamci_platform_data em_x270_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23|
-			  MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27|
-			  MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30|
-			  MMC_VDD_30_31|MMC_VDD_31_32,
-	.init 		= em_x270_mci_init,
-	.setpower 	= em_x270_mci_setpower,
-	.exit		= em_x270_mci_exit,
+	.ocr_mask		= MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23|
+				  MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27|
+				  MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30|
+				  MMC_VDD_30_31|MMC_VDD_31_32,
+	.init 			= em_x270_mci_init,
+	.setpower 		= em_x270_mci_setpower,
+	.exit			= em_x270_mci_exit,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
 };
 
 static void __init em_x270_init_mmc(void)
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index ca9912ea78d..1708c010984 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -88,7 +88,10 @@ static struct platform_device *devices[] __initdata = {
 
 #ifdef CONFIG_MMC_PXA
 static struct pxamci_platform_data gumstix_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.gpio_card_detect 	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
 };
 
 static void __init gumstix_mmc_init(void)
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index b6243b59d9b..b6486ef20b1 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -168,7 +168,10 @@ static struct pxafb_mach_info sharp_lm8v31 = {
 };
 
 static struct pxamci_platform_data idp_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
 };
 
 static void __init idp_init(void)
diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c
index 961807dc646..2a4945db31c 100644
--- a/arch/arm/mach-pxa/imote2.c
+++ b/arch/arm/mach-pxa/imote2.c
@@ -389,6 +389,9 @@ static int imote2_mci_get_ro(struct device *dev)
 static struct pxamci_platform_data imote2_mci_platform_data = {
 	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* default anyway */
 	.get_ro = imote2_mci_get_ro,
+	.gpio_card_detect = -1,
+	.gpio_card_ro	= -1,
+	.gpio_power = -1,
 };
 
 static struct mtd_partition imote2flash_partitions[] = {
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index f04c8333dff..1785cc9494d 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -482,11 +482,14 @@ static void lubbock_mci_exit(struct device *dev, void *data)
 }
 
 static struct pxamci_platform_data lubbock_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.detect_delay	= 1,
-	.init 		= lubbock_mci_init,
-	.get_ro		= lubbock_mci_get_ro,
-	.exit 		= lubbock_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.detect_delay		= 1,
+	.init 			= lubbock_mci_init,
+	.get_ro			= lubbock_mci_get_ro,
+	.exit 			= lubbock_mci_exit,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
 };
 
 static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index ca39669cffc..0daba43d7ca 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -651,55 +651,24 @@ static struct platform_device bq24022 = {
 static int magician_mci_init(struct device *dev,
 				irq_handler_t detect_irq, void *data)
 {
-	int err;
-
-	err = request_irq(IRQ_MAGICIAN_SD, detect_irq,
+	return request_irq(IRQ_MAGICIAN_SD, detect_irq,
 				IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
-				"MMC card detect", data);
-	if (err)
-		goto err_request_irq;
-	err = gpio_request(EGPIO_MAGICIAN_SD_POWER, "SD_POWER");
-	if (err)
-		goto err_request_power;
-	err = gpio_request(EGPIO_MAGICIAN_nSD_READONLY, "nSD_READONLY");
-	if (err)
-		goto err_request_readonly;
-
-	return 0;
-
-err_request_readonly:
-	gpio_free(EGPIO_MAGICIAN_SD_POWER);
-err_request_power:
-	free_irq(IRQ_MAGICIAN_SD, data);
-err_request_irq:
-	return err;
-}
-
-static void magician_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *pdata = dev->platform_data;
-
-	gpio_set_value(EGPIO_MAGICIAN_SD_POWER, (1 << vdd) & pdata->ocr_mask);
-}
-
-static int magician_mci_get_ro(struct device *dev)
-{
-	return (!gpio_get_value(EGPIO_MAGICIAN_nSD_READONLY));
+				"mmc card detect", data);
 }
 
 static void magician_mci_exit(struct device *dev, void *data)
 {
-	gpio_free(EGPIO_MAGICIAN_nSD_READONLY);
-	gpio_free(EGPIO_MAGICIAN_SD_POWER);
 	free_irq(IRQ_MAGICIAN_SD, data);
 }
 
 static struct pxamci_platform_data magician_mci_info = {
-	.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
-	.init     = magician_mci_init,
-	.get_ro   = magician_mci_get_ro,
-	.setpower = magician_mci_setpower,
-	.exit     = magician_mci_exit,
+	.ocr_mask 		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init     		= magician_mci_init,
+	.exit     		= magician_mci_exit,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= EGPIO_MAGICIAN_nSD_READONLY,
+	.gpio_card_ro_invert	= 1,
+	.gpio_power		= EGPIO_MAGICIAN_SD_POWER,
 };
 
 
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index f4dabf0273c..f7dc23078ce 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -450,10 +450,13 @@ static void mainstone_mci_exit(struct device *dev, void *data)
 }
 
 static struct pxamci_platform_data mainstone_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 		= mainstone_mci_init,
-	.setpower 	= mainstone_mci_setpower,
-	.exit		= mainstone_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init 			= mainstone_mci_init,
+	.setpower 		= mainstone_mci_setpower,
+	.exit			= mainstone_mci_exit,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
 };
 
 static void mainstone_irda_transceiver_mode(struct device *dev, int mode)
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 2d28132c725..a8122ecd2a3 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -434,72 +434,15 @@ struct gpio_vbus_mach_info gpio_vbus_data = {
 /*
  * SDIO/MMC Card controller
  */
-static void mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *p_d = dev->platform_data;
-
-	if ((1 << vdd) & p_d->ocr_mask)
-		gpio_set_value(GPIO91_SDIO_EN, 1);	/* enable SDIO power */
-	else
-		gpio_set_value(GPIO91_SDIO_EN, 0);	/* disable SDIO power */
-}
-
-static int mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO78_SDIO_RO);
-}
-
-struct gpio_ress mci_gpios[] = {
-	MIO_GPIO_IN(GPIO78_SDIO_RO, 	"SDIO readonly detect"),
-	MIO_GPIO_IN(GPIO15_SDIO_INSERT,	"SDIO insertion detect"),
-	MIO_GPIO_OUT(GPIO91_SDIO_EN, 0,	"SDIO power enable")
-};
-
-static void mci_exit(struct device *dev, void *data)
-{
-	mio_gpio_free(ARRAY_AND_SIZE(mci_gpios));
-	free_irq(gpio_to_irq(GPIO15_SDIO_INSERT), data);
-}
-
-static struct pxamci_platform_data mioa701_mci_info;
-
 /**
  * The card detect interrupt isn't debounced so we delay it by 250ms
  * to give the card a chance to fully insert/eject.
  */
-static int mci_init(struct device *dev, irq_handler_t detect_int, void *data)
-{
-	int rc;
-	int irq = gpio_to_irq(GPIO15_SDIO_INSERT);
-
-	rc = mio_gpio_request(ARRAY_AND_SIZE(mci_gpios));
-	if (rc)
-		goto err_gpio;
-	/* enable RE/FE interrupt on card insertion and removal */
-	rc = request_irq(irq, detect_int,
-			 IRQF_DISABLED | IRQF_TRIGGER_RISING |
-			 IRQF_TRIGGER_FALLING,
-			 "MMC card detect", data);
-	if (rc)
-		goto err_irq;
-
-	mioa701_mci_info.detect_delay = msecs_to_jiffies(250);
-	return 0;
-
-err_irq:
-	dev_err(dev, "mioa701_mci_init: MMC/SD:"
-		" can't request MMC card detect IRQ\n");
-	mio_gpio_free(ARRAY_AND_SIZE(mci_gpios));
-err_gpio:
-	return rc;
-}
-
 static struct pxamci_platform_data mioa701_mci_info = {
-	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
-	.init	  = mci_init,
-	.get_ro	  = mci_get_ro,
-	.setpower = mci_setpower,
-	.exit	  = mci_exit,
+	.ocr_mask 		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO15_SDIO_INSERT,
+	.gpio_card_ro		= GPIO78_SDIO_RO,
+	.gpio_power		= GPIO91_SDIO_EN,
 };
 
 /* FlashRAM */
@@ -841,7 +784,7 @@ static void mioa701_restart(char c, const char *cmd)
 static struct gpio_ress global_gpios[] = {
 	MIO_GPIO_OUT(GPIO9_CHARGE_EN, 1, "Charger enable"),
 	MIO_GPIO_OUT(GPIO18_POWEROFF, 0, "Power Off"),
-	MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power")
+	MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power"),
 };
 
 static void __init mioa701_machine_init(void)
@@ -855,6 +798,7 @@ static void __init mioa701_machine_init(void)
 	mio_gpio_request(ARRAY_AND_SIZE(global_gpios));
 	bootstrap_init();
 	set_pxa_fb_info(&mioa701_pxafb_info);
+	mioa701_mci_info.detect_delay = msecs_to_jiffies(250);
 	pxa_set_mci_info(&mioa701_mci_info);
 	pxa_set_keypad_info(&mioa701_keypad_info);
 	wm97xx_bat_set_pdata(&mioa701_battery_data);
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 169fcc18154..445749198cd 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -143,83 +143,11 @@ static unsigned long palmld_pin_config[] __initdata = {
 /******************************************************************************
  * SD/MMC card controller
  ******************************************************************************/
-static int palmld_mci_init(struct device *dev, irq_handler_t palmld_detect_int,
-				void *data)
-{
-	int err = 0;
-
-	/* Setup an interrupt for detecting card insert/remove events */
-	err = gpio_request(GPIO_NR_PALMLD_SD_DETECT_N, "SD IRQ");
-	if (err)
-		goto err;
-	err = gpio_direction_input(GPIO_NR_PALMLD_SD_DETECT_N);
-	if (err)
-		goto err2;
-	err = request_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N),
-			palmld_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
-			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-			"SD/MMC card detect", data);
-	if (err) {
-		printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
-				__func__);
-		goto err2;
-	}
-
-	err = gpio_request(GPIO_NR_PALMLD_SD_POWER, "SD_POWER");
-	if (err)
-		goto err3;
-	err = gpio_direction_output(GPIO_NR_PALMLD_SD_POWER, 0);
-	if (err)
-		goto err4;
-
-	err = gpio_request(GPIO_NR_PALMLD_SD_READONLY, "SD_READONLY");
-	if (err)
-		goto err4;
-	err = gpio_direction_input(GPIO_NR_PALMLD_SD_READONLY);
-	if (err)
-		goto err5;
-
-	printk(KERN_DEBUG "%s: irq registered\n", __func__);
-
-	return 0;
-
-err5:
-	gpio_free(GPIO_NR_PALMLD_SD_READONLY);
-err4:
-	gpio_free(GPIO_NR_PALMLD_SD_POWER);
-err3:
-	free_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N), data);
-err2:
-	gpio_free(GPIO_NR_PALMLD_SD_DETECT_N);
-err:
-	return err;
-}
-
-static void palmld_mci_exit(struct device *dev, void *data)
-{
-	gpio_free(GPIO_NR_PALMLD_SD_READONLY);
-	gpio_free(GPIO_NR_PALMLD_SD_POWER);
-	free_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N), data);
-	gpio_free(GPIO_NR_PALMLD_SD_DETECT_N);
-}
-
-static void palmld_mci_power(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *p_d = dev->platform_data;
-	gpio_set_value(GPIO_NR_PALMLD_SD_POWER, p_d->ocr_mask & (1 << vdd));
-}
-
-static int palmld_mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO_NR_PALMLD_SD_READONLY);
-}
-
 static struct pxamci_platform_data palmld_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.setpower	= palmld_mci_power,
-	.get_ro		= palmld_mci_get_ro,
-	.init 		= palmld_mci_init,
-	.exit		= palmld_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO_NR_PALMLD_SD_DETECT_N,
+	.gpio_card_ro		= GPIO_NR_PALMLD_SD_READONLY,
+	.gpio_power		= GPIO_NR_PALMLD_SD_POWER,
 };
 
 /******************************************************************************
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 33f726ff55e..42d0528d3e9 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -124,83 +124,11 @@ static unsigned long palmt5_pin_config[] __initdata = {
 /******************************************************************************
  * SD/MMC card controller
  ******************************************************************************/
-static int palmt5_mci_init(struct device *dev, irq_handler_t palmt5_detect_int,
-				void *data)
-{
-	int err = 0;
-
-	/* Setup an interrupt for detecting card insert/remove events */
-	err = gpio_request(GPIO_NR_PALMT5_SD_DETECT_N, "SD IRQ");
-	if (err)
-		goto err;
-	err = gpio_direction_input(GPIO_NR_PALMT5_SD_DETECT_N);
-	if (err)
-		goto err2;
-	err = request_irq(gpio_to_irq(GPIO_NR_PALMT5_SD_DETECT_N),
-			palmt5_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
-			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-			"SD/MMC card detect", data);
-	if (err) {
-		printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
-				__func__);
-		goto err2;
-	}
-
-	err = gpio_request(GPIO_NR_PALMT5_SD_POWER, "SD_POWER");
-	if (err)
-		goto err3;
-	err = gpio_direction_output(GPIO_NR_PALMT5_SD_POWER, 0);
-	if (err)
-		goto err4;
-
-	err = gpio_request(GPIO_NR_PALMT5_SD_READONLY, "SD_READONLY");
-	if (err)
-		goto err4;
-	err = gpio_direction_input(GPIO_NR_PALMT5_SD_READONLY);
-	if (err)
-		goto err5;
-
-	printk(KERN_DEBUG "%s: irq registered\n", __func__);
-
-	return 0;
-
-err5:
-	gpio_free(GPIO_NR_PALMT5_SD_READONLY);
-err4:
-	gpio_free(GPIO_NR_PALMT5_SD_POWER);
-err3:
-	free_irq(gpio_to_irq(GPIO_NR_PALMT5_SD_DETECT_N), data);
-err2:
-	gpio_free(GPIO_NR_PALMT5_SD_DETECT_N);
-err:
-	return err;
-}
-
-static void palmt5_mci_exit(struct device *dev, void *data)
-{
-	gpio_free(GPIO_NR_PALMT5_SD_READONLY);
-	gpio_free(GPIO_NR_PALMT5_SD_POWER);
-	free_irq(IRQ_GPIO_PALMT5_SD_DETECT_N, data);
-	gpio_free(GPIO_NR_PALMT5_SD_DETECT_N);
-}
-
-static void palmt5_mci_power(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *p_d = dev->platform_data;
-	gpio_set_value(GPIO_NR_PALMT5_SD_POWER, p_d->ocr_mask & (1 << vdd));
-}
-
-static int palmt5_mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO_NR_PALMT5_SD_READONLY);
-}
-
 static struct pxamci_platform_data palmt5_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.setpower	= palmt5_mci_power,
-	.get_ro		= palmt5_mci_get_ro,
-	.init 		= palmt5_mci_init,
-	.exit		= palmt5_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO_NR_PALMT5_SD_DETECT_N,
+	.gpio_card_ro		= GPIO_NR_PALMT5_SD_READONLY,
+	.gpio_power		= GPIO_NR_PALMT5_SD_POWER,
 };
 
 /******************************************************************************
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index d823b09801d..d9ef76c9278 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -117,83 +117,11 @@ static unsigned long palmte2_pin_config[] __initdata = {
 /******************************************************************************
  * SD/MMC card controller
  ******************************************************************************/
-static int palmte2_mci_init(struct device *dev,
-				irq_handler_t palmte2_detect_int, void *data)
-{
-	int err = 0;
-
-	/* Setup an interrupt for detecting card insert/remove events */
-	err = gpio_request(GPIO_NR_PALMTE2_SD_DETECT_N, "SD IRQ");
-	if (err)
-		goto err;
-	err = gpio_direction_input(GPIO_NR_PALMTE2_SD_DETECT_N);
-	if (err)
-		goto err2;
-	err = request_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N),
-			palmte2_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
-			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-			"SD/MMC card detect", data);
-	if (err) {
-		printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
-				__func__);
-		goto err2;
-	}
-
-	err = gpio_request(GPIO_NR_PALMTE2_SD_POWER, "SD_POWER");
-	if (err)
-		goto err3;
-	err = gpio_direction_output(GPIO_NR_PALMTE2_SD_POWER, 0);
-	if (err)
-		goto err4;
-
-	err = gpio_request(GPIO_NR_PALMTE2_SD_READONLY, "SD_READONLY");
-	if (err)
-		goto err4;
-	err = gpio_direction_input(GPIO_NR_PALMTE2_SD_READONLY);
-	if (err)
-		goto err5;
-
-	printk(KERN_DEBUG "%s: irq registered\n", __func__);
-
-	return 0;
-
-err5:
-	gpio_free(GPIO_NR_PALMTE2_SD_READONLY);
-err4:
-	gpio_free(GPIO_NR_PALMTE2_SD_POWER);
-err3:
-	free_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), data);
-err2:
-	gpio_free(GPIO_NR_PALMTE2_SD_DETECT_N);
-err:
-	return err;
-}
-
-static void palmte2_mci_exit(struct device *dev, void *data)
-{
-	gpio_free(GPIO_NR_PALMTE2_SD_READONLY);
-	gpio_free(GPIO_NR_PALMTE2_SD_POWER);
-	free_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), data);
-	gpio_free(GPIO_NR_PALMTE2_SD_DETECT_N);
-}
-
-static void palmte2_mci_power(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *p_d = dev->platform_data;
-	gpio_set_value(GPIO_NR_PALMTE2_SD_POWER, p_d->ocr_mask & (1 << vdd));
-}
-
-static int palmte2_mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO_NR_PALMTE2_SD_READONLY);
-}
-
 static struct pxamci_platform_data palmte2_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.setpower	= palmte2_mci_power,
-	.get_ro		= palmte2_mci_get_ro,
-	.init 		= palmte2_mci_init,
-	.exit		= palmte2_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO_NR_PALMTE2_SD_DETECT_N,
+	.gpio_card_ro		= GPIO_NR_PALMTE2_SD_READONLY,
+	.gpio_power		= GPIO_NR_PALMTE2_SD_POWER,
 };
 
 /******************************************************************************
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 83d02087958..4a9ca718962 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -140,83 +140,11 @@ static unsigned long palmtx_pin_config[] __initdata = {
 /******************************************************************************
  * SD/MMC card controller
  ******************************************************************************/
-static int palmtx_mci_init(struct device *dev, irq_handler_t palmtx_detect_int,
-				void *data)
-{
-	int err = 0;
-
-	/* Setup an interrupt for detecting card insert/remove events */
-	err = gpio_request(GPIO_NR_PALMTX_SD_DETECT_N, "SD IRQ");
-	if (err)
-		goto err;
-	err = gpio_direction_input(GPIO_NR_PALMTX_SD_DETECT_N);
-	if (err)
-		goto err2;
-	err = request_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N),
-			palmtx_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
-			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-			"SD/MMC card detect", data);
-	if (err) {
-		printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
-				__func__);
-		goto err2;
-	}
-
-	err = gpio_request(GPIO_NR_PALMTX_SD_POWER, "SD_POWER");
-	if (err)
-		goto err3;
-	err = gpio_direction_output(GPIO_NR_PALMTX_SD_POWER, 0);
-	if (err)
-		goto err4;
-
-	err = gpio_request(GPIO_NR_PALMTX_SD_READONLY, "SD_READONLY");
-	if (err)
-		goto err4;
-	err = gpio_direction_input(GPIO_NR_PALMTX_SD_READONLY);
-	if (err)
-		goto err5;
-
-	printk(KERN_DEBUG "%s: irq registered\n", __func__);
-
-	return 0;
-
-err5:
-	gpio_free(GPIO_NR_PALMTX_SD_READONLY);
-err4:
-	gpio_free(GPIO_NR_PALMTX_SD_POWER);
-err3:
-	free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data);
-err2:
-	gpio_free(GPIO_NR_PALMTX_SD_DETECT_N);
-err:
-	return err;
-}
-
-static void palmtx_mci_exit(struct device *dev, void *data)
-{
-	gpio_free(GPIO_NR_PALMTX_SD_READONLY);
-	gpio_free(GPIO_NR_PALMTX_SD_POWER);
-	free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data);
-	gpio_free(GPIO_NR_PALMTX_SD_DETECT_N);
-}
-
-static void palmtx_mci_power(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *p_d = dev->platform_data;
-	gpio_set_value(GPIO_NR_PALMTX_SD_POWER, p_d->ocr_mask & (1 << vdd));
-}
-
-static int palmtx_mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO_NR_PALMTX_SD_READONLY);
-}
-
 static struct pxamci_platform_data palmtx_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.setpower	= palmtx_mci_power,
-	.get_ro		= palmtx_mci_get_ro,
-	.init 		= palmtx_mci_init,
-	.exit		= palmtx_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO_NR_PALMTX_SD_DETECT_N,
+	.gpio_card_ro		= GPIO_NR_PALMTX_SD_READONLY,
+	.gpio_power		= GPIO_NR_PALMTX_SD_POWER,
 };
 
 /******************************************************************************
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index c3645aa3fa3..d8fa53c1917 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -129,88 +129,14 @@ static unsigned long palmz72_pin_config[] __initdata = {
 /******************************************************************************
  * SD/MMC card controller
  ******************************************************************************/
-static int palmz72_mci_init(struct device *dev,
-				irq_handler_t palmz72_detect_int, void *data)
-{
-	int err = 0;
-
-	/* Setup an interrupt for detecting card insert/remove events */
-	err = gpio_request(GPIO_NR_PALMZ72_SD_DETECT_N, "SD IRQ");
-	if (err)
-		goto err;
-	err = gpio_direction_input(GPIO_NR_PALMZ72_SD_DETECT_N);
-	if (err)
-		goto err2;
-	err = request_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N),
-			palmz72_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
-			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-			"SD/MMC card detect", data);
-	if (err) {
-		printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
-				__func__);
-		goto err2;
-	}
-
-	/* SD_POWER is not actually power, but it is more like chip
-	 * select, i.e. it is inverted */
-
-	err = gpio_request(GPIO_NR_PALMZ72_SD_POWER_N, "SD_POWER");
-	if (err)
-		goto err3;
-	err = gpio_direction_output(GPIO_NR_PALMZ72_SD_POWER_N, 0);
-	if (err)
-		goto err4;
-	err = gpio_request(GPIO_NR_PALMZ72_SD_RO, "SD_RO");
-	if (err)
-		goto err4;
-	err = gpio_direction_input(GPIO_NR_PALMZ72_SD_RO);
-	if (err)
-		goto err5;
-
-	printk(KERN_DEBUG "%s: irq registered\n", __func__);
-
-	return 0;
-
-err5:
-	gpio_free(GPIO_NR_PALMZ72_SD_RO);
-err4:
-	gpio_free(GPIO_NR_PALMZ72_SD_POWER_N);
-err3:
-	free_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N), data);
-err2:
-	gpio_free(GPIO_NR_PALMZ72_SD_DETECT_N);
-err:
-	return err;
-}
-
-static void palmz72_mci_exit(struct device *dev, void *data)
-{
-	gpio_free(GPIO_NR_PALMZ72_SD_POWER_N);
-	free_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N), data);
-	gpio_free(GPIO_NR_PALMZ72_SD_DETECT_N);
-	gpio_free(GPIO_NR_PALMZ72_SD_RO);
-}
-
-static void palmz72_mci_power(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *p_d = dev->platform_data;
-	if (p_d->ocr_mask & (1 << vdd))
-		gpio_set_value(GPIO_NR_PALMZ72_SD_POWER_N, 0);
-	else
-		gpio_set_value(GPIO_NR_PALMZ72_SD_POWER_N, 1);
-}
-
-static int palmz72_mci_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO_NR_PALMZ72_SD_RO);
-}
-
+/* SD_POWER is not actually power, but it is more like chip
+ * select, i.e. it is inverted */
 static struct pxamci_platform_data palmz72_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.setpower	= palmz72_mci_power,
-	.get_ro		= palmz72_mci_ro,
-	.init 		= palmz72_mci_init,
-	.exit		= palmz72_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO_NR_PALMZ72_SD_DETECT_N,
+	.gpio_card_ro		= GPIO_NR_PALMZ72_SD_RO,
+	.gpio_power		= GPIO_NR_PALMZ72_SD_POWER_N,
+	.gpio_power_invert	= 1,
 };
 
 /******************************************************************************
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 01791d74e08..e211633471f 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -321,11 +321,14 @@ static void pcm990_mci_exit(struct device *dev, void *data)
 #define MSECS_PER_JIFFY (1000/HZ)
 
 static struct pxamci_platform_data pcm990_mci_platform_data = {
-	.detect_delay	= 250 / MSECS_PER_JIFFY,
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.init 		= pcm990_mci_init,
-	.setpower 	= pcm990_mci_setpower,
-	.exit		= pcm990_mci_exit,
+	.detect_delay		= 250 / MSECS_PER_JIFFY,
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.init 			= pcm990_mci_init,
+	.setpower 		= pcm990_mci_setpower,
+	.exit			= pcm990_mci_exit,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
 };
 
 static struct pxaohci_platform_data pcm990_ohci_platform_data = {
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 9352d4a3483..333b1dc2dd3 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -245,20 +245,10 @@ static inline void poodle_init_spi(void) {}
  * The card detect interrupt isn't debounced so we delay it by 250ms
  * to give the card a chance to fully insert/eject.
  */
-static struct pxamci_platform_data poodle_mci_platform_data;
-
 static int poodle_mci_init(struct device *dev, irq_handler_t poodle_detect_int, void *data)
 {
 	int err;
 
-	err = gpio_request(POODLE_GPIO_nSD_DETECT, "nSD_DETECT");
-	if (err)
-		goto err_out;
-
-	err = gpio_request(POODLE_GPIO_nSD_WP, "nSD_WP");
-	if (err)
-		goto err_free_1;
-
 	err = gpio_request(POODLE_GPIO_SD_PWR, "SD_PWR");
 	if (err)
 		goto err_free_2;
@@ -267,34 +257,14 @@ static int poodle_mci_init(struct device *dev, irq_handler_t poodle_detect_int,
 	if (err)
 		goto err_free_3;
 
-	gpio_direction_input(POODLE_GPIO_nSD_DETECT);
-	gpio_direction_input(POODLE_GPIO_nSD_WP);
-
 	gpio_direction_output(POODLE_GPIO_SD_PWR, 0);
 	gpio_direction_output(POODLE_GPIO_SD_PWR1, 0);
 
-	poodle_mci_platform_data.detect_delay = msecs_to_jiffies(250);
-
-	err = request_irq(POODLE_IRQ_GPIO_nSD_DETECT, poodle_detect_int,
-			  IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-			  "MMC card detect", data);
-	if (err) {
-		pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n",
-				__func__);
-		goto err_free_4;
-	}
-
 	return 0;
 
-err_free_4:
-	gpio_free(POODLE_GPIO_SD_PWR1);
 err_free_3:
 	gpio_free(POODLE_GPIO_SD_PWR);
 err_free_2:
-	gpio_free(POODLE_GPIO_nSD_WP);
-err_free_1:
-	gpio_free(POODLE_GPIO_nSD_DETECT);
-err_out:
 	return err;
 }
 
@@ -312,28 +282,20 @@ static void poodle_mci_setpower(struct device *dev, unsigned int vdd)
 	}
 }
 
-static int poodle_mci_get_ro(struct device *dev)
-{
-	return !!gpio_get_value(POODLE_GPIO_nSD_WP);
-	return GPLR(POODLE_GPIO_nSD_WP) & GPIO_bit(POODLE_GPIO_nSD_WP);
-}
-
-
 static void poodle_mci_exit(struct device *dev, void *data)
 {
-	free_irq(POODLE_IRQ_GPIO_nSD_DETECT, data);
 	gpio_free(POODLE_GPIO_SD_PWR1);
 	gpio_free(POODLE_GPIO_SD_PWR);
-	gpio_free(POODLE_GPIO_nSD_WP);
-	gpio_free(POODLE_GPIO_nSD_DETECT);
 }
 
 static struct pxamci_platform_data poodle_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 		= poodle_mci_init,
-	.get_ro		= poodle_mci_get_ro,
-	.setpower 	= poodle_mci_setpower,
-	.exit		= poodle_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init 			= poodle_mci_init,
+	.setpower 		= poodle_mci_setpower,
+	.exit			= poodle_mci_exit,
+	.gpio_card_detect	= POODLE_IRQ_GPIO_nSD_DETECT,
+	.gpio_card_ro		= POODLE_GPIO_nSD_WP,
+	.gpio_power		= -1,
 };
 
 
@@ -521,6 +483,7 @@ static void __init poodle_init(void)
 	set_pxa_fb_parent(&poodle_locomo_device.dev);
 	set_pxa_fb_info(&poodle_fb_info);
 	pxa_set_udc_info(&udc_info);
+	poodle_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 	pxa_set_mci_info(&poodle_mci_platform_data);
 	pxa_set_ficp_info(&poodle_ficp_platform_data);
 	pxa_set_i2c_info(NULL);
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index dda310fe71c..da85327e630 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -378,45 +378,6 @@ static inline void spitz_init_spi(void) {}
  * The card detect interrupt isn't debounced so we delay it by 250ms
  * to give the card a chance to fully insert/eject.
  */
-
-static struct pxamci_platform_data spitz_mci_platform_data;
-
-static int spitz_mci_init(struct device *dev, irq_handler_t spitz_detect_int, void *data)
-{
-	int err;
-
-	err = gpio_request(SPITZ_GPIO_nSD_DETECT, "nSD_DETECT");
-	if (err)
-		goto err_out;
-
-	err = gpio_request(SPITZ_GPIO_nSD_WP, "nSD_WP");
-	if (err)
-		goto err_free_1;
-
-	gpio_direction_input(SPITZ_GPIO_nSD_DETECT);
-	gpio_direction_input(SPITZ_GPIO_nSD_WP);
-
-	spitz_mci_platform_data.detect_delay = msecs_to_jiffies(250);
-
-	err = request_irq(SPITZ_IRQ_GPIO_nSD_DETECT, spitz_detect_int,
-			  IRQF_DISABLED | IRQF_TRIGGER_RISING |
-			  IRQF_TRIGGER_FALLING,
-			  "MMC card detect", data);
-	if (err) {
-		pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n",
-				__func__);
-		goto err_free_2;
-	}
-	return 0;
-
-err_free_2:
-	gpio_free(SPITZ_GPIO_nSD_WP);
-err_free_1:
-	gpio_free(SPITZ_GPIO_nSD_DETECT);
-err_out:
-	return err;
-}
-
 static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
 {
 	struct pxamci_platform_data* p_d = dev->platform_data;
@@ -427,24 +388,12 @@ static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
 		spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0000);
 }
 
-static int spitz_mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(SPITZ_GPIO_nSD_WP);
-}
-
-static void spitz_mci_exit(struct device *dev, void *data)
-{
-	free_irq(SPITZ_IRQ_GPIO_nSD_DETECT, data);
-	gpio_free(SPITZ_GPIO_nSD_WP);
-	gpio_free(SPITZ_GPIO_nSD_DETECT);
-}
-
 static struct pxamci_platform_data spitz_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 		= spitz_mci_init,
-	.get_ro		= spitz_mci_get_ro,
-	.setpower 	= spitz_mci_setpower,
-	.exit		= spitz_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.setpower 		= spitz_mci_setpower,
+	.gpio_card_detect	= SPITZ_GPIO_nSD_DETECT,
+	.gpio_card_ro		= SPITZ_GPIO_nSD_WP,
+	.gpio_power		= -1,
 };
 
 
@@ -695,6 +644,7 @@ static void __init common_init(void)
 	spitz_init_spi();
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
+	spitz_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 	pxa_set_mci_info(&spitz_mci_platform_data);
 	pxa_set_ohci_info(&spitz_ohci_platform_data);
 	pxa_set_ficp_info(&spitz_ficp_platform_data);
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 117ad5920e5..b56cc5667bb 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -247,49 +247,10 @@ static struct pxa2xx_udc_mach_info udc_info __initdata = {
 /*
  * MMC/SD Device
  */
-static struct pxamci_platform_data tosa_mci_platform_data;
-
 static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void *data)
 {
 	int err;
 
-	tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
-
-	err = gpio_request(TOSA_GPIO_nSD_DETECT, "MMC/SD card detect");
-	if (err) {
-		printk(KERN_ERR "tosa_mci_init: can't request nSD_DETECT gpio\n");
-		goto err_gpio_detect;
-	}
-	err = gpio_direction_input(TOSA_GPIO_nSD_DETECT);
-	if (err)
-		goto err_gpio_detect_dir;
-
-	err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int,
-			  IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-				"MMC/SD card detect", data);
-	if (err) {
-		printk(KERN_ERR "tosa_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
-		goto err_irq;
-	}
-
-	err = gpio_request(TOSA_GPIO_SD_WP, "SD Write Protect");
-	if (err) {
-		printk(KERN_ERR "tosa_mci_init: can't request SD_WP gpio\n");
-		goto err_gpio_wp;
-	}
-	err = gpio_direction_input(TOSA_GPIO_SD_WP);
-	if (err)
-		goto err_gpio_wp_dir;
-
-	err = gpio_request(TOSA_GPIO_PWR_ON, "SD Power");
-	if (err) {
-		printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
-		goto err_gpio_pwr;
-	}
-	err = gpio_direction_output(TOSA_GPIO_PWR_ON, 0);
-	if (err)
-		goto err_gpio_pwr_dir;
-
 	err = gpio_request(TOSA_GPIO_nSD_INT, "SD Int");
 	if (err) {
 		printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
@@ -304,51 +265,21 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
 err_gpio_int_dir:
 	gpio_free(TOSA_GPIO_nSD_INT);
 err_gpio_int:
-err_gpio_pwr_dir:
-	gpio_free(TOSA_GPIO_PWR_ON);
-err_gpio_pwr:
-err_gpio_wp_dir:
-	gpio_free(TOSA_GPIO_SD_WP);
-err_gpio_wp:
-	free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
-err_irq:
-err_gpio_detect_dir:
-	gpio_free(TOSA_GPIO_nSD_DETECT);
-err_gpio_detect:
 	return err;
 }
 
-static void tosa_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data* p_d = dev->platform_data;
-
-	if (( 1 << vdd) & p_d->ocr_mask) {
-		gpio_set_value(TOSA_GPIO_PWR_ON, 1);
-	} else {
-		gpio_set_value(TOSA_GPIO_PWR_ON, 0);
-	}
-}
-
-static int tosa_mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(TOSA_GPIO_SD_WP);
-}
-
 static void tosa_mci_exit(struct device *dev, void *data)
 {
 	gpio_free(TOSA_GPIO_nSD_INT);
-	gpio_free(TOSA_GPIO_PWR_ON);
-	gpio_free(TOSA_GPIO_SD_WP);
-	free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
-	gpio_free(TOSA_GPIO_nSD_DETECT);
 }
 
 static struct pxamci_platform_data tosa_mci_platform_data = {
-	.ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
-	.init           = tosa_mci_init,
-	.get_ro		= tosa_mci_get_ro,
-	.setpower       = tosa_mci_setpower,
-	.exit           = tosa_mci_exit,
+	.ocr_mask       	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init           	= tosa_mci_init,
+	.exit           	= tosa_mci_exit,
+	.gpio_card_detect	= TOSA_GPIO_nSD_DETECT,
+	.gpio_card_ro		= TOSA_GPIO_SD_WP,
+	.gpio_power		= TOSA_GPIO_PWR_ON,
 };
 
 /*
@@ -910,6 +841,7 @@ static void __init tosa_init(void)
 	dummy = gpiochip_reserve(TOSA_SCOOP_JC_GPIO_BASE, 12);
 	dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16);
 
+	tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 	pxa_set_mci_info(&tosa_mci_platform_data);
 	pxa_set_udc_info(&udc_info);
 	pxa_set_ficp_info(&tosa_ficp_platform_data);
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 825f540176d..32299869b35 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -367,6 +367,9 @@ static struct pxamci_platform_data trizeps4_mci_platform_data = {
 	.exit		= trizeps4_mci_exit,
 	.get_ro		= NULL,	/* write-protection not supported */
 	.setpower 	= NULL,	/* power-switching not supported */
+	.gpio_card_detect = -1,
+	.gpio_card_ro	= -1,
+	.gpio_power	= -1,
 };
 
 /****************************************************************************
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 218d2001f1d..09784d3954e 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -290,6 +290,9 @@ static struct pxamci_platform_data zylonite_mci_platform_data = {
 	.init 		= zylonite_mci_init,
 	.exit		= zylonite_mci_exit,
 	.get_ro		= zylonite_mci_ro,
+	.gpio_card_detect = -1,
+	.gpio_card_ro	= -1,
+	.gpio_power	= -1,
 };
 
 static struct pxamci_platform_data zylonite_mci2_platform_data = {
-- 
cgit v1.2.3


From 70f6d3e8a6670d1cccab5e206315b935eb62a08e Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.y.miao@gmail.com>
Date: Mon, 13 Jul 2009 22:57:56 +0800
Subject: [ARM] pxa/littleton: update littleton to use the new gpio_card_detect
 for mmc

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/littleton.c | 43 +++++--------------------------------------
 1 file changed, 5 insertions(+), 38 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 55b3788fd1a..13848955d13 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -265,45 +265,12 @@ static inline void littleton_init_keypad(void) {}
 #endif
 
 #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static int littleton_mci_init(struct device *dev,
-			      irq_handler_t littleton_detect_int, void *data)
-{
-	int err, gpio_cd = GPIO_MMC1_CARD_DETECT;
-
-	err = gpio_request(gpio_cd, "mmc card detect");
-	if (err)
-		goto err_request_cd;
-
-	gpio_direction_input(gpio_cd);
-
-	err = request_irq(gpio_to_irq(gpio_cd), littleton_detect_int,
-			  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-			  "mmc card detect", data);
-	if (err) {
-		dev_err(dev, "failed to request card detect IRQ\n");
-		goto err_request_irq;
-	}
-	return 0;
-
-err_request_irq:
-	gpio_free(gpio_cd);
-err_request_cd:
-	return err;
-}
-
-static void littleton_mci_exit(struct device *dev, void *data)
-{
-	int gpio_cd = GPIO_MMC1_CARD_DETECT;
-
-	free_irq(gpio_to_irq(gpio_cd), data);
-	gpio_free(gpio_cd);
-}
-
 static struct pxamci_platform_data littleton_mci_platform_data = {
-	.detect_delay	= 20,
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.init 		= littleton_mci_init,
-	.exit		= littleton_mci_exit,
+	.detect_delay		= 20,
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO_MMC1_CARD_DETECT,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
 };
 
 static void __init littleton_init_mmc(void)
-- 
cgit v1.2.3


From 0d95c1fa5661b11cf7777af2613563cc3c683d8d Mon Sep 17 00:00:00 2001
From: Daniel Ribeiro <drwyrm@gmail.com>
Date: Tue, 23 Jun 2009 12:39:25 -0300
Subject: [ARM] pxa/ezx: set IRQ_BOARD_END for EZX

Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/Kconfig             | 1 +
 arch/arm/mach-pxa/include/mach/irqs.h | 2 ++
 2 files changed, 3 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 626cecb6e73..32e44b3a8fb 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -463,6 +463,7 @@ config PXA_EZX
 	select PXA27x
 	select IWMMXT
 	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
 
 config MACH_EZX_A780
 	bool "Motorola EZX A780"
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index 7af0de4bf65..567204c3959 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -129,6 +129,8 @@
 #define IRQ_BOARD_END		(IRQ_BOARD_START + 70)
 #elif defined(CONFIG_MACH_ZYLONITE)
 #define IRQ_BOARD_END		(IRQ_BOARD_START + 32)
+#elif defined(CONFIG_PXA_EZX)
+#define IRQ_BOARD_END		(IRQ_BOARD_START + 23)
 #else
 #define IRQ_BOARD_END		(IRQ_BOARD_START + 16)
 #endif
-- 
cgit v1.2.3


From 53740df16f42163255031d24d99ba207a9ac81a9 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Wed, 17 Jun 2009 10:32:54 +0200
Subject: [ARM] pxa/colibri: add NAND config for Colibri PXA3xx boards

NAND feature will be enabled when the appropriate config option is set.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/colibri-pxa300.c       |  1 +
 arch/arm/mach-pxa/colibri-pxa320.c       |  1 +
 arch/arm/mach-pxa/colibri-pxa3xx.c       | 41 ++++++++++++++++++++++++++++++++
 arch/arm/mach-pxa/include/mach/colibri.h |  6 +++++
 4 files changed, 49 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index 7c9c34c19ae..37c239c5656 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -172,6 +172,7 @@ void __init colibri_pxa300_init(void)
 {
 	colibri_pxa300_init_eth();
 	colibri_pxa300_init_ohci();
+	colibri_pxa3xx_init_nand();
 	colibri_pxa300_init_lcd();
 	colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO39_GPIO));
 	colibri_pxa310_init_ac97();
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index a18d37b3c5e..458c1a147b6 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -168,6 +168,7 @@ void __init colibri_pxa320_init(void)
 {
 	colibri_pxa320_init_eth();
 	colibri_pxa320_init_ohci();
+	colibri_pxa3xx_init_nand();
 	colibri_pxa320_init_lcd();
 	colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO49_GPIO));
 	colibri_pxa320_init_ac97();
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
index 2c846bbfc43..efebaf4d734 100644
--- a/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
@@ -25,6 +25,7 @@
 #include <mach/colibri.h>
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
+#include <mach/pxa3xx_nand.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -157,3 +158,43 @@ void __init colibri_pxa3xx_init_lcd(int bl_pin)
 }
 #endif
 
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+static struct mtd_partition colibri_nand_partitions[] = {
+	{
+		.name        = "bootloader",
+		.offset      = 0,
+		.size        = SZ_512K,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	{
+		.name        = "kernel",
+		.offset      = MTDPART_OFS_APPEND,
+		.size        = SZ_4M,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	{
+		.name        = "reserved",
+		.offset      = MTDPART_OFS_APPEND,
+		.size        = SZ_1M,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	{
+		.name        = "fs",
+		.offset      = MTDPART_OFS_APPEND,
+		.size        = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct pxa3xx_nand_platform_data colibri_nand_info = {
+	.enable_arbiter	= 1,
+	.keep_config	= 1,
+	.parts		= colibri_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(colibri_nand_partitions),
+};
+
+void __init colibri_pxa3xx_init_nand(void)
+{
+	pxa3xx_set_nand_info(&colibri_nand_info);
+}
+#endif
+
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index a88d7caff0d..811743c5614 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -23,6 +23,12 @@ static inline void colibri_pxa3xx_init_lcd(int bl_pin) {}
 extern void colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data);
 #endif
 
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+extern void colibri_pxa3xx_init_nand(void);
+#else
+static inline void colibri_pxa3xx_init_nand(void) {}
+#endif
+
 /* physical memory regions */
 #define COLIBRI_SDRAM_BASE	0xa0000000      /* SDRAM region */
 
-- 
cgit v1.2.3


From ecc85e166fbec0378215aab13925b0e980a48d1e Mon Sep 17 00:00:00 2001
From: Alex Roman <alex.roman@gmail.com>
Date: Fri, 3 Jul 2009 14:58:59 +0800
Subject: [ARM] pxa/colibri: add UART MFP configuration for the PXA320 module

This patch configures the MFP pads for UART1, UART2, UART3 for the
Toradex Colibri PXA320 module. Previously they were just not
configured resulting in just the first UART working because it was the
only one that was configured by the bootloader (Toradex EBOOT in our
case).

This patch is against vanilla 2.6.30 and has been tested with the
Toradex Orchid carrier board (all three UARTs were functional).

Signed-off-by: Alex Roman <alex.roman@gmail.com>
Acked-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/colibri-pxa320.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index 458c1a147b6..494572825c7 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -164,6 +164,37 @@ static inline void __init colibri_pxa320_init_ac97(void)
 static inline void colibri_pxa320_init_ac97(void) {}
 #endif
 
+/*
+ * The following configuration is verified to work with the Toradex Orchid
+ * carrier board
+ */
+static mfp_cfg_t colibri_pxa320_uart_pin_config[] __initdata = {
+	/* UART 1 configuration (may be set by bootloader) */
+	GPIO99_UART1_CTS,
+	GPIO104_UART1_RTS,
+	GPIO97_UART1_RXD,
+	GPIO98_UART1_TXD,
+	GPIO101_UART1_DTR,
+	GPIO103_UART1_DSR,
+	GPIO100_UART1_DCD,
+	GPIO102_UART1_RI,
+
+	/* UART 2 configuration */
+	GPIO109_UART2_CTS,
+	GPIO112_UART2_RTS,
+	GPIO110_UART2_RXD,
+	GPIO111_UART2_TXD,
+
+	/* UART 3 configuration */
+	GPIO30_UART3_RXD,
+	GPIO31_UART3_TXD,
+};
+
+static void __init colibri_pxa320_init_uart(void)
+{
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_uart_pin_config));
+}
+
 void __init colibri_pxa320_init(void)
 {
 	colibri_pxa320_init_eth();
@@ -174,6 +205,7 @@ void __init colibri_pxa320_init(void)
 	colibri_pxa320_init_ac97();
 	colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa320_mmc_pin_config),
 				mfp_to_gpio(MFP_PIN_GPIO28));
+	colibri_pxa320_init_uart();
 }
 
 MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
-- 
cgit v1.2.3


From 4a3d3abe91963d7b3e562e70fc6c5c9d3f76fb30 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Wed, 13 May 2009 11:33:43 +0200
Subject: [ARM] pxa/pcm990: convert pcm990 to soc-camera as platform-device

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/pcm990-baseboard.c | 54 +++++++++++++++++++++++++++++-------
 1 file changed, 44 insertions(+), 10 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index e211633471f..bbda57078e0 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -430,25 +430,56 @@ static void pcm990_camera_free_bus(struct soc_camera_link *link)
 	gpio_bus_switch = -EINVAL;
 }
 
-static struct soc_camera_link iclink = {
-	.bus_id	= 0, /* Must match with the camera ID above */
-	.query_bus_param = pcm990_camera_query_bus_param,
-	.set_bus_param = pcm990_camera_set_bus_param,
-	.free_bus = pcm990_camera_free_bus,
-};
-
 /* Board I2C devices. */
 static struct i2c_board_info __initdata pcm990_i2c_devices[] = {
 	{
 		/* Must initialize before the camera(s) */
 		I2C_BOARD_INFO("pca9536", 0x41),
 		.platform_data = &pca9536_data,
-	}, {
+	},
+};
+
+static struct i2c_board_info pcm990_camera_i2c[] = {
+	{
 		I2C_BOARD_INFO("mt9v022", 0x48),
-		.platform_data = &iclink, /* With extender */
 	}, {
 		I2C_BOARD_INFO("mt9m001", 0x5d),
-		.platform_data = &iclink, /* With extender */
+	},
+};
+
+static struct soc_camera_link iclink[] = {
+	{
+		.bus_id			= 0, /* Must match with the camera ID */
+		.board_info		= &pcm990_camera_i2c[0],
+		.i2c_adapter_id		= 0,
+		.query_bus_param	= pcm990_camera_query_bus_param,
+		.set_bus_param		= pcm990_camera_set_bus_param,
+		.free_bus		= pcm990_camera_free_bus,
+		.module_name		= "mt9v022",
+	}, {
+		.bus_id			= 0, /* Must match with the camera ID */
+		.board_info		= &pcm990_camera_i2c[1],
+		.i2c_adapter_id		= 0,
+		.query_bus_param	= pcm990_camera_query_bus_param,
+		.set_bus_param		= pcm990_camera_set_bus_param,
+		.free_bus		= pcm990_camera_free_bus,
+		.module_name		= "mt9m001",
+	},
+};
+
+static struct platform_device pcm990_camera[] = {
+	{
+		.name	= "soc-camera-pdrv",
+		.id	= 0,
+		.dev	= {
+			.platform_data = &iclink[0],
+		},
+	}, {
+		.name	= "soc-camera-pdrv",
+		.id	= 1,
+		.dev	= {
+			.platform_data = &iclink[1],
+		},
 	},
 };
 #endif /* CONFIG_VIDEO_PXA27x ||CONFIG_VIDEO_PXA27x_MODULE */
@@ -504,6 +535,9 @@ void __init pcm990_baseboard_init(void)
 	pxa_set_camera_info(&pcm990_pxacamera_platform_data);
 
 	i2c_register_board_info(0, ARRAY_AND_SIZE(pcm990_i2c_devices));
+
+	platform_device_register(&pcm990_camera[0]);
+	platform_device_register(&pcm990_camera[1]);
 #endif
 
 	printk(KERN_INFO "PCM-990 Evaluation baseboard initialized\n");
-- 
cgit v1.2.3


From a48c24a696f0d93c49f913b7818e9819612b1f4e Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Fri, 24 Apr 2009 18:40:27 +0200
Subject: [ARM] pxa/mioa701: convert mioa701 to the new platform-device
 soc-camera interface

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/mioa701.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index a8122ecd2a3..3cab452e556 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -708,19 +708,20 @@ static struct i2c_board_info __initdata mioa701_pi2c_devices[] = {
 	},
 };
 
-static struct soc_camera_link iclink = {
-	.bus_id	= 0, /* Must match id in pxa27x_device_camera in device.c */
-};
-
 /* Board I2C devices. */
 static struct i2c_board_info __initdata mioa701_i2c_devices[] = {
 	{
-		/* Must initialize before the camera(s) */
 		I2C_BOARD_INFO("mt9m111", 0x5d),
-		.platform_data = &iclink,
 	},
 };
 
+static struct soc_camera_link iclink = {
+	.bus_id		= 0, /* Match id in pxa27x_device_camera in device.c */
+	.board_info	= &mioa701_i2c_devices[0],
+	.i2c_adapter_id	= 0,
+	.module_name	= "mt9m111",
+};
+
 struct i2c_pxa_platform_data i2c_pdata = {
 	.fast_mode = 1,
 };
@@ -754,6 +755,7 @@ MIO_SIMPLE_DEV(pxa2xx_pcm,	  "pxa2xx-pcm",	    NULL)
 MIO_SIMPLE_DEV(mioa701_sound,	  "mioa701-wm9713", NULL)
 MIO_SIMPLE_DEV(mioa701_board,	  "mioa701-board",  NULL)
 MIO_SIMPLE_DEV(gpio_vbus,	  "gpio-vbus",      &gpio_vbus_data);
+MIO_SIMPLE_DEV(mioa701_camera,	  "soc-camera-pdrv",&iclink);
 
 static struct platform_device *devices[] __initdata = {
 	&mioa701_gpio_keys,
@@ -764,6 +766,7 @@ static struct platform_device *devices[] __initdata = {
 	&power_dev,
 	&strataflash,
 	&gpio_vbus,
+	&mioa701_camera,
 	&mioa701_board,
 };
 
@@ -813,7 +816,6 @@ static void __init mioa701_machine_init(void)
 	pxa_set_i2c_info(&i2c_pdata);
 	pxa27x_set_i2c_power_info(NULL);
 	pxa_set_camera_info(&mioa701_pxacamera_platform_data);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(mioa701_i2c_devices));
 }
 
 static void mioa701_machine_exit(void)
-- 
cgit v1.2.3


From 489db6a662af5ca1b6574bae2d974017346bb983 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 12 May 2009 18:12:29 +0200
Subject: [ARM] pxa/em-x270: convert em-x270 to soc-camera as platform-device

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/em-x270.c | 22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index e0121f4fcaf..2ed1dfe194b 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1025,22 +1025,32 @@ static int em_x270_sensor_power(struct device *dev, int on)
 	return 0;
 }
 
-static struct soc_camera_link iclink = {
-	.bus_id	= 0,
-	.power = em_x270_sensor_power,
-};
-
 static struct i2c_board_info em_x270_i2c_cam_info[] = {
 	{
 		I2C_BOARD_INFO("mt9m111", 0x48),
+	},
+};
+
+static struct soc_camera_link iclink = {
+	.bus_id		= 0,
+	.power		= em_x270_sensor_power,
+	.board_info	= &em_x270_i2c_cam_info[0],
+	.i2c_adapter_id	= 0,
+	.module_name	= "mt9m111",
+};
+
+static struct platform_device em_x270_camera = {
+	.name	= "soc-camera-pdrv",
+	.id	= -1,
+	.dev	= {
 		.platform_data = &iclink,
 	},
 };
 
 static void  __init em_x270_init_camera(void)
 {
-	i2c_register_board_info(0, ARRAY_AND_SIZE(em_x270_i2c_cam_info));
 	pxa_set_camera_info(&em_x270_camera_platform_data);
+	platform_device_register(&em_x270_camera);
 }
 #else
 static inline void em_x270_init_camera(void) {}
-- 
cgit v1.2.3


From 9cf97b1beeb8596b1e923642e3f2af949fc68082 Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Sun, 26 Jul 2009 13:48:39 +0300
Subject: [ARM] pxa/em-x270: remove debug leftovers

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/em-x270.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 2ed1dfe194b..8614cabd2dd 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1258,7 +1258,6 @@ static void __init em_x270_init_i2c(void)
 
 static void __init em_x270_module_init(void)
 {
-	pr_info("%s\n", __func__);
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
 
 	mmc_cd = GPIO13_MMC_CD;
@@ -1270,7 +1269,6 @@ static void __init em_x270_module_init(void)
 
 static void __init em_x270_exeda_init(void)
 {
-	pr_info("%s\n", __func__);
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(exeda_pin_config));
 
 	mmc_cd = GPIO114_MMC_CD;
-- 
cgit v1.2.3


From 100a1d250d3806caa97b08d04cb558372c8e8097 Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Sun, 26 Jul 2009 13:48:40 +0300
Subject: [ARM] pxa/em-x270: add vcc_core regulator

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/em-x270.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 8614cabd2dd..aec7f4214b1 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1116,6 +1116,7 @@ REGULATOR_CONSUMER(ldo5, NULL, "vcc cam");
 REGULATOR_CONSUMER(ldo10, &pxa_device_mci.dev, "vcc sdio");
 REGULATOR_CONSUMER(ldo12, NULL, "vcc usb");
 REGULATOR_CONSUMER(ldo19, &em_x270_gprs_userspace_consumer.dev, "vcc gprs");
+REGULATOR_CONSUMER(buck2, NULL, "vcc_core");
 
 #define REGULATOR_INIT(_ldo, _min_uV, _max_uV, _ops_mask)		\
 	static struct regulator_init_data _ldo##_data = {		\
@@ -1138,6 +1139,7 @@ REGULATOR_INIT(ldo10, 2000000, 3200000,
 	       REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE);
 REGULATOR_INIT(ldo12, 3000000, 3000000, REGULATOR_CHANGE_STATUS);
 REGULATOR_INIT(ldo19, 3200000, 3200000, REGULATOR_CHANGE_STATUS);
+REGULATOR_INIT(buck2, 1000000, 1650000, REGULATOR_CHANGE_VOLTAGE);
 
 struct led_info em_x270_led_info = {
 	.name = "em-x270:orange",
@@ -1207,6 +1209,8 @@ struct da903x_subdev_info em_x270_da9030_subdevs[] = {
 	DA9030_LDO(12),
 	DA9030_LDO(19),
 
+	DA9030_SUBDEV(regulator, BUCK2, &buck2_data),
+
 	DA9030_SUBDEV(led, LED_PC, &em_x270_led_info),
 	DA9030_SUBDEV(backlight, WLED, &em_x270_led_info),
 	DA9030_SUBDEV(battery, BAT, &em_x270_batterty_info),
-- 
cgit v1.2.3


From a2099e49f4f8728b0c0301a4e3eb650644ee9206 Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Mon, 3 Aug 2009 12:07:52 +0300
Subject: [ARM] pxa/cm-x270: add libertas device registration

v2 changes:
- use gpio_to_irq instead of IRQ_GPIO
- check gpio_direction_output return value to be on the safe side :)

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/cm-x270.c | 110 +++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 108 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 59292181088..eea78b6c2bc 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -13,13 +13,18 @@
 #include <linux/sysdev.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
+#include <linux/delay.h>
 
 #include <linux/rtc-v3020.h>
 #include <video/mbxfb.h>
 
+#include <linux/spi/spi.h>
+#include <linux/spi/libertas_spi.h>
+
 #include <mach/pxa27x.h>
 #include <mach/ohci.h>
 #include <mach/mmc.h>
+#include <mach/pxa2xx_spi.h>
 
 #include "generic.h"
 
@@ -34,6 +39,10 @@
 /* MMC power enable */
 #define GPIO105_MMC_POWER	(105)
 
+/* WLAN GPIOS */
+#define GPIO19_WLAN_STRAP	(19)
+#define GPIO102_WLAN_RST	(102)
+
 static unsigned long cmx270_pin_config[] = {
 	/* AC'97 */
 	GPIO28_AC97_BITCLK,
@@ -94,8 +103,8 @@ static unsigned long cmx270_pin_config[] = {
 	GPIO26_SSP1_RXD,
 
 	/* SSP2 */
-	GPIO19_SSP2_SCLK,
-	GPIO14_SSP2_SFRM,
+	GPIO19_GPIO,	/* SSP2 clock is used as GPIO for Libertas pin-strap */
+	GPIO14_GPIO,
 	GPIO87_SSP2_TXD,
 	GPIO88_SSP2_RXD,
 
@@ -123,6 +132,7 @@ static unsigned long cmx270_pin_config[] = {
 	GPIO0_GPIO	| WAKEUP_ON_EDGE_BOTH,
 	GPIO105_GPIO	| MFP_LPM_DRIVE_HIGH,	/* MMC/SD power */
 	GPIO53_GPIO,				/* PC card reset */
+	GPIO102_GPIO,				/* WLAN reset */
 
 	/* NAND controls */
 	GPIO11_GPIO	| MFP_LPM_DRIVE_HIGH,	/* NAND CE# */
@@ -131,6 +141,7 @@ static unsigned long cmx270_pin_config[] = {
 	/* interrupts */
 	GPIO10_GPIO,	/* DM9000 interrupt */
 	GPIO83_GPIO,	/* MMC card detect */
+	GPIO95_GPIO,	/* WLAN interrupt */
 };
 
 /* V3020 RTC */
@@ -287,6 +298,100 @@ static void __init cmx270_init_mmc(void)
 static inline void cmx270_init_mmc(void) {}
 #endif
 
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct pxa2xx_spi_master cm_x270_spi_info = {
+	.num_chipselect	= 1,
+	.enable_dma	= 1,
+};
+
+static struct pxa2xx_spi_chip cm_x270_libertas_chip = {
+	.rx_threshold	= 1,
+	.tx_threshold	= 1,
+	.timeout	= 1000,
+	.gpio_cs	= 14,
+};
+
+static unsigned long cm_x270_libertas_pin_config[] = {
+	/* SSP2 */
+	GPIO19_SSP2_SCLK,
+	GPIO14_GPIO,
+	GPIO87_SSP2_TXD,
+	GPIO88_SSP2_RXD,
+
+};
+
+static int cm_x270_libertas_setup(struct spi_device *spi)
+{
+	int err = gpio_request(GPIO19_WLAN_STRAP, "WLAN STRAP");
+	if (err)
+		return err;
+
+	err = gpio_request(GPIO102_WLAN_RST, "WLAN RST");
+	if (err)
+		goto err_free_strap;
+
+	err = gpio_direction_output(GPIO102_WLAN_RST, 0);
+	if (err)
+		goto err_free_strap;
+	msleep(100);
+
+	err = gpio_direction_output(GPIO19_WLAN_STRAP, 1);
+	if (err)
+		goto err_free_strap;
+	msleep(100);
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(cm_x270_libertas_pin_config));
+
+	gpio_set_value(GPIO102_WLAN_RST, 1);
+	msleep(100);
+
+	spi->bits_per_word = 16;
+	spi_setup(spi);
+
+	return 0;
+
+err_free_strap:
+	gpio_free(GPIO19_WLAN_STRAP);
+
+	return err;
+}
+
+static int cm_x270_libertas_teardown(struct spi_device *spi)
+{
+	gpio_set_value(GPIO102_WLAN_RST, 0);
+	gpio_free(GPIO102_WLAN_RST);
+	gpio_free(GPIO19_WLAN_STRAP);
+
+	return 0;
+}
+
+struct libertas_spi_platform_data cm_x270_libertas_pdata = {
+	.use_dummy_writes	= 1,
+	.setup			= cm_x270_libertas_setup,
+	.teardown		= cm_x270_libertas_teardown,
+};
+
+static struct spi_board_info cm_x270_spi_devices[] __initdata = {
+	{
+		.modalias		= "libertas_spi",
+		.max_speed_hz		= 13000000,
+		.bus_num		= 2,
+		.irq			= gpio_to_irq(95),
+		.chip_select		= 0,
+		.controller_data	= &cm_x270_libertas_chip,
+		.platform_data		= &cm_x270_libertas_pdata,
+	},
+};
+
+static void __init cmx270_init_spi(void)
+{
+	pxa2xx_set_spi_info(2, &cm_x270_spi_info);
+	spi_register_board_info(ARRAY_AND_SIZE(cm_x270_spi_devices));
+}
+#else
+static inline void cmx270_init_spi(void) {}
+#endif
+
 void __init cmx270_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));
@@ -299,4 +404,5 @@ void __init cmx270_init(void)
 	cmx270_init_mmc();
 	cmx270_init_ohci();
 	cmx270_init_2700G();
+	cmx270_init_spi();
 }
-- 
cgit v1.2.3


From 9845b6b15cf03ae3f473c39a13f2454abad50e09 Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Thu, 16 Jul 2009 19:38:41 +0200
Subject: [ARM] pxa/palm: add detect_delay to mmc for PalmTX,T5,LD

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/palmld.c | 1 +
 arch/arm/mach-pxa/palmt5.c | 1 +
 arch/arm/mach-pxa/palmtx.c | 1 +
 3 files changed, 3 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 445749198cd..08c599b49d8 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -148,6 +148,7 @@ static struct pxamci_platform_data palmld_mci_platform_data = {
 	.gpio_card_detect	= GPIO_NR_PALMLD_SD_DETECT_N,
 	.gpio_card_ro		= GPIO_NR_PALMLD_SD_READONLY,
 	.gpio_power		= GPIO_NR_PALMLD_SD_POWER,
+	.detect_delay		= 20,
 };
 
 /******************************************************************************
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 42d0528d3e9..88dcaac358a 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -129,6 +129,7 @@ static struct pxamci_platform_data palmt5_mci_platform_data = {
 	.gpio_card_detect	= GPIO_NR_PALMT5_SD_DETECT_N,
 	.gpio_card_ro		= GPIO_NR_PALMT5_SD_READONLY,
 	.gpio_power		= GPIO_NR_PALMT5_SD_POWER,
+	.detect_delay		= 20,
 };
 
 /******************************************************************************
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 4a9ca718962..fffa32a6fa3 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -145,6 +145,7 @@ static struct pxamci_platform_data palmtx_mci_platform_data = {
 	.gpio_card_detect	= GPIO_NR_PALMTX_SD_DETECT_N,
 	.gpio_card_ro		= GPIO_NR_PALMTX_SD_READONLY,
 	.gpio_power		= GPIO_NR_PALMTX_SD_POWER,
+	.detect_delay		= 20,
 };
 
 /******************************************************************************
-- 
cgit v1.2.3


From d7c307cfe76ae0c0493fbdac417ef6e30221f61b Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Fri, 17 Jul 2009 19:46:58 +0200
Subject: [ARM] pxa/palm: Add NOR flash support for PalmLD

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/palmld.c | 40 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 08c599b49d8..b3ae8b958ad 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -25,6 +25,9 @@
 #include <linux/wm97xx_batt.h>
 #include <linux/power_supply.h>
 #include <linux/sysdev.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -140,6 +143,42 @@ static unsigned long palmld_pin_config[] __initdata = {
 	GPIO13_GPIO,	/* earphone detect */
 };
 
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+static struct mtd_partition palmld_partitions[] = {
+	{
+		.name		= "Flash",
+		.offset		= 0x00000000,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0
+	}
+};
+
+static struct physmap_flash_data palmld_flash_data[] = {
+	{
+		.width		= 2,			/* bankwidth in bytes */
+		.parts		= palmld_partitions,
+		.nr_parts	= ARRAY_SIZE(palmld_partitions)
+	}
+};
+
+static struct resource palmld_flash_resource = {
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_4M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device palmld_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.resource	= &palmld_flash_resource,
+	.num_resources	= 1,
+	.dev 		= {
+		.platform_data = palmld_flash_data,
+	},
+};
+
 /******************************************************************************
  * SD/MMC card controller
  ******************************************************************************/
@@ -489,6 +528,7 @@ static struct platform_device *devices[] __initdata = {
 	&power_supply,
 	&palmld_asoc,
 	&palmld_hdd,
+	&palmld_flash,
 };
 
 static struct map_desc palmld_io_desc[] __initdata = {
-- 
cgit v1.2.3


From 3eb37ff06ba189ce386d582179fc9abd37a92405 Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Sat, 18 Jul 2009 16:51:41 +0200
Subject: [ARM] pxa/palm: add NAND Flash support for PalmTX

This patch adds support for NAND chip found in PalmTX handheld. Support
is implemented through the gen_nand driver.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/include/mach/palmtx.h |  5 ++
 arch/arm/mach-pxa/palmtx.c              | 83 ++++++++++++++++++++++++++++++++-
 2 files changed, 86 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h
index e74082c872e..1be0db6ed55 100644
--- a/arch/arm/mach-pxa/include/mach/palmtx.h
+++ b/arch/arm/mach-pxa/include/mach/palmtx.h
@@ -82,6 +82,11 @@
 #define PALMTX_PHYS_FLASH_START	PXA_CS0_PHYS	/* ChipSelect 0 */
 #define PALMTX_PHYS_NAND_START	PXA_CS1_PHYS	/* ChipSelect 1 */
 
+#define PALMTX_NAND_ALE_PHYS	(PALMTX_PHYS_NAND_START | (1 << 24))
+#define PALMTX_NAND_CLE_PHYS	(PALMTX_PHYS_NAND_START | (1 << 25))
+#define PALMTX_NAND_ALE_VIRT	0xff100000
+#define PALMTX_NAND_CLE_VIRT	0xff200000
+
 /* TOUCHSCREEN */
 #define AC97_LINK_FRAME			21
 
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index fffa32a6fa3..052f99863da 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -28,6 +28,8 @@
 #include <linux/wm97xx_batt.h>
 #include <linux/power_supply.h>
 #include <linux/usb/gpio_vbus.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -131,6 +133,10 @@ static unsigned long palmtx_pin_config[] __initdata = {
 	GPIO34_FFUART_RXD,
 	GPIO39_FFUART_TXD,
 
+	/* NAND */
+	GPIO15_nCS_1,
+	GPIO18_RDY,
+
 	/* MISC. */
 	GPIO10_GPIO,	/* hotsync button */
 	GPIO12_GPIO,	/* power detect */
@@ -421,6 +427,68 @@ static struct pxafb_mach_info palmtx_lcd_screen = {
 	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
 };
 
+/******************************************************************************
+ * NAND Flash
+ ******************************************************************************/
+static void palmtx_nand_cmd_ctl(struct mtd_info *mtd, int cmd,
+				 unsigned int ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+	unsigned long nandaddr = (unsigned long)this->IO_ADDR_W;
+
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	if (ctrl & NAND_CLE)
+		writeb(cmd, PALMTX_NAND_CLE_VIRT);
+	else if (ctrl & NAND_ALE)
+		writeb(cmd, PALMTX_NAND_ALE_VIRT);
+	else
+		writeb(cmd, nandaddr);
+}
+
+static struct mtd_partition palmtx_partition_info[] = {
+	[0] = {
+		.name	= "palmtx-0",
+		.offset	= 0,
+		.size	= MTDPART_SIZ_FULL
+	},
+};
+
+static const char *palmtx_part_probes[] = { "cmdlinepart", NULL };
+
+struct platform_nand_data palmtx_nand_platdata = {
+	.chip	= {
+		.nr_chips		= 1,
+		.chip_offset		= 0,
+		.nr_partitions		= ARRAY_SIZE(palmtx_partition_info),
+		.partitions		= palmtx_partition_info,
+		.chip_delay		= 20,
+		.part_probe_types 	= palmtx_part_probes,
+	},
+	.ctrl	= {
+		.cmd_ctrl	= palmtx_nand_cmd_ctl,
+	},
+};
+
+static struct resource palmtx_nand_resource[] = {
+	[0]	= {
+		.start	= PXA_CS1_PHYS,
+		.end	= PXA_CS1_PHYS + SZ_1M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device palmtx_nand = {
+	.name		= "gen_nand",
+	.num_resources	= ARRAY_SIZE(palmtx_nand_resource),
+	.resource	= palmtx_nand_resource,
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &palmtx_nand_platdata,
+	}
+};
+
 /******************************************************************************
  * Power management - standby
  ******************************************************************************/
@@ -447,6 +515,7 @@ static struct platform_device *devices[] __initdata = {
 	&power_supply,
 	&palmtx_asoc,
 	&palmtx_gpio_vbus,
+	&palmtx_nand,
 };
 
 static struct map_desc palmtx_io_desc[] __initdata = {
@@ -454,8 +523,18 @@ static struct map_desc palmtx_io_desc[] __initdata = {
 	.virtual	= PALMTX_PCMCIA_VIRT,
 	.pfn		= __phys_to_pfn(PALMTX_PCMCIA_PHYS),
 	.length		= PALMTX_PCMCIA_SIZE,
-	.type		= MT_DEVICE
-},
+	.type		= MT_DEVICE,
+}, {
+	.virtual	= PALMTX_NAND_ALE_VIRT,
+	.pfn		= __phys_to_pfn(PALMTX_NAND_ALE_PHYS),
+	.length		= SZ_1M,
+	.type		= MT_DEVICE,
+}, {
+	.virtual	= PALMTX_NAND_CLE_VIRT,
+	.pfn		= __phys_to_pfn(PALMTX_NAND_CLE_PHYS),
+	.length		= SZ_1M,
+	.type		= MT_DEVICE,
+}
 };
 
 static void __init palmtx_map_io(void)
-- 
cgit v1.2.3


From 91cf6a97b9a155081c455bd453b7ab889d31da03 Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Mon, 27 Jul 2009 02:07:41 +0200
Subject: [ARM] pxa/palm: Add NOR Flash support for PalmTX

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/palmtx.c | 39 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 052f99863da..c0aca18b71b 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -30,6 +30,8 @@
 #include <linux/usb/gpio_vbus.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/physmap.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -143,6 +145,42 @@ static unsigned long palmtx_pin_config[] __initdata = {
 	GPIO107_GPIO,	/* earphone detect */
 };
 
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+static struct mtd_partition palmtx_partitions[] = {
+	{
+		.name		= "Flash",
+		.offset		= 0x00000000,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0
+	}
+};
+
+static struct physmap_flash_data palmtx_flash_data[] = {
+	{
+		.width		= 2,			/* bankwidth in bytes */
+		.parts		= palmtx_partitions,
+		.nr_parts	= ARRAY_SIZE(palmtx_partitions)
+	}
+};
+
+static struct resource palmtx_flash_resource = {
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_8M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device palmtx_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.resource	= &palmtx_flash_resource,
+	.num_resources	= 1,
+	.dev 		= {
+		.platform_data = palmtx_flash_data,
+	},
+};
+
 /******************************************************************************
  * SD/MMC card controller
  ******************************************************************************/
@@ -515,6 +553,7 @@ static struct platform_device *devices[] __initdata = {
 	&power_supply,
 	&palmtx_asoc,
 	&palmtx_gpio_vbus,
+	&palmtx_flash,
 	&palmtx_nand,
 };
 
-- 
cgit v1.2.3


From 5d783a2d592ce5fdc01292470059ed15998e404e Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Thu, 16 Jul 2009 13:26:48 +0200
Subject: [ARM] pxa: Palm Tungsten|C initial support

This patch adds basic support for Palm Tungsten|C handheld.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/Kconfig               |   9 +
 arch/arm/mach-pxa/Makefile              |   1 +
 arch/arm/mach-pxa/include/mach/palmtc.h |  86 ++++++
 arch/arm/mach-pxa/palmtc.c              | 462 ++++++++++++++++++++++++++++++++
 4 files changed, 558 insertions(+)
 create mode 100644 arch/arm/mach-pxa/include/mach/palmtc.h
 create mode 100644 arch/arm/mach-pxa/palmtc.c

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 32e44b3a8fb..d1dcb1cf075 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -376,6 +376,15 @@ config MACH_PALMTE2
 	  Say Y here if you intend to run this kernel on a Palm Tungsten|E2
 	  handheld computer.
 
+config MACH_PALMTC
+	bool "Palm Tungsten|C"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA25x
+	help
+	  Say Y here if you intend to run this kernel on a Palm Tungsten|C
+	  handheld computer.
+
 config MACH_PALMT5
 	bool "Palm Tungsten|T5"
 	default y
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index d4c6122a342..aa8f83e9421 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -58,6 +58,7 @@ obj-$(CONFIG_MACH_E750)		+= e750.o
 obj-$(CONFIG_MACH_E400)		+= e400.o
 obj-$(CONFIG_MACH_E800)		+= e800.o
 obj-$(CONFIG_MACH_PALMTE2)	+= palmte2.o
+obj-$(CONFIG_MACH_PALMTC)	+= palmtc.o
 obj-$(CONFIG_MACH_PALMT5)	+= palmt5.o
 obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o
 obj-$(CONFIG_MACH_PALMLD)	+= palmld.o
diff --git a/arch/arm/mach-pxa/include/mach/palmtc.h b/arch/arm/mach-pxa/include/mach/palmtc.h
new file mode 100644
index 00000000000..3dc9b074ab4
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/palmtc.h
@@ -0,0 +1,86 @@
+/*
+ * linux/include/asm-arm/arch-pxa/palmtc-gpio.h
+ *
+ * GPIOs and interrupts for Palm Tungsten|C Handheld Computer
+ *
+ * Authors:	Alex Osborne <bobofdoom@gmail.com>
+ *		Marek Vasut <marek.vasut@gmail.com>
+ *		Holger Bocklet <bitz.email@gmx.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_PALMTC_H_
+#define _INCLUDE_PALMTC_H_
+
+/** HERE ARE GPIOs **/
+
+/* GPIOs */
+#define GPIO_NR_PALMTC_EARPHONE_DETECT	2
+#define GPIO_NR_PALMTC_CRADLE_DETECT	5
+#define GPIO_NR_PALMTC_HOTSYNC_BUTTON	7
+
+/* SD/MMC */
+#define GPIO_NR_PALMTC_SD_DETECT_N	12
+#define GPIO_NR_PALMTC_SD_POWER		32
+#define GPIO_NR_PALMTC_SD_READONLY	54
+
+/* WLAN */
+#define GPIO_NR_PALMTC_PCMCIA_READY	13
+#define GPIO_NR_PALMTC_PCMCIA_PWRREADY	14
+#define GPIO_NR_PALMTC_PCMCIA_POWER1	15
+#define GPIO_NR_PALMTC_PCMCIA_POWER2	33
+#define GPIO_NR_PALMTC_PCMCIA_POWER3	55
+#define GPIO_NR_PALMTC_PCMCIA_RESET	78
+
+/* UDC */
+#define GPIO_NR_PALMTC_USB_DETECT_N	4
+#define GPIO_NR_PALMTC_USB_POWER	36
+
+/* LCD/BACKLIGHT */
+#define GPIO_NR_PALMTC_BL_POWER		16
+#define GPIO_NR_PALMTC_LCD_POWER	44
+#define GPIO_NR_PALMTC_LCD_BLANK	38
+
+/* UART */
+#define GPIO_NR_PALMTC_RS232_POWER	37
+
+/* IRDA */
+#define GPIO_NR_PALMTC_IR_DISABLE	45
+
+/* IRQs */
+#define IRQ_GPIO_PALMTC_SD_DETECT_N	IRQ_GPIO(GPIO_NR_PALMTC_SD_DETECT_N)
+#define IRQ_GPIO_PALMTC_WLAN_READY	IRQ_GPIO(GPIO_NR_PALMTC_WLAN_READY)
+
+/* UCB1400 GPIOs */
+#define GPIO_NR_PALMTC_POWER_DETECT	(0x80 | 0x00)
+#define GPIO_NR_PALMTC_HEADPHONE_DETECT	(0x80 | 0x01)
+#define GPIO_NR_PALMTC_SPEAKER_ENABLE	(0x80 | 0x03)
+#define GPIO_NR_PALMTC_VIBRA_POWER	(0x80 | 0x05)
+#define GPIO_NR_PALMTC_LED_POWER	(0x80 | 0x07)
+
+/** HERE ARE INIT VALUES **/
+#define PALMTC_UCB1400_GPIO_OFFSET	0x80
+
+/* BATTERY */
+#define PALMTC_BAT_MAX_VOLTAGE		4000	/* 4.00V maximum voltage */
+#define PALMTC_BAT_MIN_VOLTAGE		3550	/* 3.55V critical voltage */
+#define PALMTC_BAT_MAX_CURRENT		0	/* unknokn */
+#define PALMTC_BAT_MIN_CURRENT		0	/* unknown */
+#define PALMTC_BAT_MAX_CHARGE		1	/* unknown */
+#define PALMTC_BAT_MIN_CHARGE		1	/* unknown */
+#define PALMTC_MAX_LIFE_MINS		240	/* on-life in minutes */
+
+#define PALMTC_BAT_MEASURE_DELAY	(HZ * 1)
+
+/* BACKLIGHT */
+#define PALMTC_MAX_INTENSITY		0xFE
+#define PALMTC_DEFAULT_INTENSITY	0x7E
+#define PALMTC_LIMIT_MASK		0x7F
+#define PALMTC_PRESCALER		0x3F
+#define PALMTC_PERIOD_NS		3500
+
+#endif
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
new file mode 100644
index 00000000000..f70f1f820ee
--- /dev/null
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -0,0 +1,462 @@
+/*
+ * linux/arch/arm/mach-pxa/palmtc.c
+ *
+ * Support for the Palm Tungsten|C
+ *
+ * Author:	Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on work of:
+ *		Petr Blaha <p3t3@centrum.cz>
+ *		Chetan S. Kumar <shivakumar.chetan@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/input.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/ucb1400.h>
+#include <linux/power_supply.h>
+#include <linux/gpio_keys.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/audio.h>
+#include <mach/palmtc.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/irda.h>
+#include <mach/udc.h>
+#include <mach/pxa2xx-regs.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmtc_pin_config[] __initdata = {
+	/* MMC */
+	GPIO6_MMC_CLK,
+	GPIO8_MMC_CS0,
+	GPIO12_GPIO,	/* detect */
+	GPIO32_GPIO,	/* power */
+	GPIO54_GPIO,	/* r/o switch */
+
+	/* PCMCIA */
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO49_nPWE,
+	GPIO48_nPOE,
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO57_nIOIS16,
+	GPIO56_nPWAIT,
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
+	/* IrDA */
+	GPIO45_GPIO,	/* ir disable */
+	GPIO46_FICP_RXD,
+	GPIO47_FICP_TXD,
+
+	/* PWM */
+	GPIO17_PWM1_OUT,
+
+	/* USB */
+	GPIO4_GPIO,	/* detect */
+	GPIO36_GPIO,	/* pullup */
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	/* MATRIX KEYPAD */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 0 */
+	GPIO9_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 1 */
+	GPIO10_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 2 */
+	GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 3 */
+	GPIO18_GPIO | MFP_LPM_DRIVE_LOW,	/* out 0 */
+	GPIO19_GPIO | MFP_LPM_DRIVE_LOW,	/* out 1 */
+	GPIO20_GPIO | MFP_LPM_DRIVE_LOW,	/* out 2 */
+	GPIO21_GPIO | MFP_LPM_DRIVE_LOW,	/* out 3 */
+	GPIO22_GPIO | MFP_LPM_DRIVE_LOW,	/* out 4 */
+	GPIO23_GPIO | MFP_LPM_DRIVE_LOW,	/* out 5 */
+	GPIO24_GPIO | MFP_LPM_DRIVE_LOW,	/* out 6 */
+	GPIO25_GPIO | MFP_LPM_DRIVE_LOW,	/* out 7 */
+	GPIO26_GPIO | MFP_LPM_DRIVE_LOW,	/* out 8 */
+	GPIO27_GPIO | MFP_LPM_DRIVE_LOW,	/* out 9 */
+	GPIO79_GPIO | MFP_LPM_DRIVE_LOW,	/* out 10 */
+	GPIO80_GPIO | MFP_LPM_DRIVE_LOW,	/* out 11 */
+
+	/* PXA GPIO KEYS */
+	GPIO7_GPIO | WAKEUP_ON_EDGE_BOTH,	/* hotsync button on cradle */
+
+	/* MISC */
+	GPIO1_RST,	/* reset */
+	GPIO2_GPIO,	/* earphone detect */
+	GPIO16_GPIO,	/* backlight switch */
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static struct pxamci_platform_data palmtc_mci_platform_data = {
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_power		= GPIO_NR_PALMTC_SD_POWER,
+	.gpio_card_ro		= GPIO_NR_PALMTC_SD_READONLY,
+	.gpio_card_detect	= GPIO_NR_PALMTC_SD_DETECT_N,
+	.detect_delay		= 20,
+};
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+static struct gpio_keys_button palmtc_pxa_buttons[] = {
+	{KEY_F8, GPIO_NR_PALMTC_HOTSYNC_BUTTON, 1, "HotSync Button", EV_KEY, 1},
+};
+
+static struct gpio_keys_platform_data palmtc_pxa_keys_data = {
+	.buttons	= palmtc_pxa_buttons,
+	.nbuttons	= ARRAY_SIZE(palmtc_pxa_buttons),
+};
+
+static struct platform_device palmtc_pxa_keys = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &palmtc_pxa_keys_data,
+	},
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int palmtc_backlight_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_PALMTC_BL_POWER, "BL POWER");
+	if (ret)
+		goto err;
+	ret = gpio_direction_output(GPIO_NR_PALMTC_BL_POWER, 1);
+	if (ret)
+		goto err2;
+
+	return 0;
+
+err2:
+	gpio_free(GPIO_NR_PALMTC_BL_POWER);
+err:
+	return ret;
+}
+
+static int palmtc_backlight_notify(int brightness)
+{
+	/* backlight is on when GPIO16 AF0 is high */
+	gpio_set_value(GPIO_NR_PALMTC_BL_POWER, brightness);
+	return brightness;
+}
+
+static void palmtc_backlight_exit(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMTC_BL_POWER);
+}
+
+static struct platform_pwm_backlight_data palmtc_backlight_data = {
+	.pwm_id		= 1,
+	.max_brightness	= PALMTC_MAX_INTENSITY,
+	.dft_brightness	= PALMTC_MAX_INTENSITY,
+	.pwm_period_ns	= PALMTC_PERIOD_NS,
+	.init		= palmtc_backlight_init,
+	.notify		= palmtc_backlight_notify,
+	.exit		= palmtc_backlight_exit,
+};
+
+static struct platform_device palmtc_backlight = {
+	.name	= "pwm-backlight",
+	.dev	= {
+		.parent		= &pxa25x_device_pwm1.dev,
+		.platform_data	= &palmtc_backlight_data,
+	},
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static int palmtc_irda_startup(struct device *dev)
+{
+	int err;
+	err = gpio_request(GPIO_NR_PALMTC_IR_DISABLE, "IR DISABLE");
+	if (err)
+		goto err;
+	err = gpio_direction_output(GPIO_NR_PALMTC_IR_DISABLE, 1);
+	if (err)
+		gpio_free(GPIO_NR_PALMTC_IR_DISABLE);
+err:
+	return err;
+}
+
+static void palmtc_irda_shutdown(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMTC_IR_DISABLE);
+}
+
+static void palmtc_irda_transceiver_mode(struct device *dev, int mode)
+{
+	gpio_set_value(GPIO_NR_PALMTC_IR_DISABLE, mode & IR_OFF);
+	pxa2xx_transceiver_mode(dev, mode);
+}
+
+static struct pxaficp_platform_data palmtc_ficp_platform_data = {
+	.startup		= palmtc_irda_startup,
+	.shutdown		= palmtc_irda_shutdown,
+	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
+	.transceiver_mode	= palmtc_irda_transceiver_mode,
+};
+
+/******************************************************************************
+ * Keyboard
+ ******************************************************************************/
+static const uint32_t palmtc_matrix_keys[] = {
+	KEY(0, 0, KEY_F1),
+	KEY(0, 1, KEY_X),
+	KEY(0, 2, KEY_POWER),
+	KEY(0, 3, KEY_TAB),
+	KEY(0, 4, KEY_A),
+	KEY(0, 5, KEY_Q),
+	KEY(0, 6, KEY_LEFTSHIFT),
+	KEY(0, 7, KEY_Z),
+	KEY(0, 8, KEY_S),
+	KEY(0, 9, KEY_W),
+	KEY(0, 10, KEY_E),
+	KEY(0, 11, KEY_UP),
+
+	KEY(1, 0, KEY_F2),
+	KEY(1, 1, KEY_DOWN),
+	KEY(1, 3, KEY_D),
+	KEY(1, 4, KEY_C),
+	KEY(1, 5, KEY_F),
+	KEY(1, 6, KEY_R),
+	KEY(1, 7, KEY_SPACE),
+	KEY(1, 8, KEY_V),
+	KEY(1, 9, KEY_G),
+	KEY(1, 10, KEY_T),
+	KEY(1, 11, KEY_LEFT),
+
+	KEY(2, 0, KEY_F3),
+	KEY(2, 1, KEY_LEFTCTRL),
+	KEY(2, 3, KEY_H),
+	KEY(2, 4, KEY_Y),
+	KEY(2, 5, KEY_N),
+	KEY(2, 6, KEY_J),
+	KEY(2, 7, KEY_U),
+	KEY(2, 8, KEY_M),
+	KEY(2, 9, KEY_K),
+	KEY(2, 10, KEY_I),
+	KEY(2, 11, KEY_RIGHT),
+
+	KEY(3, 0, KEY_F4),
+	KEY(3, 1, KEY_ENTER),
+	KEY(3, 3, KEY_DOT),
+	KEY(3, 4, KEY_L),
+	KEY(3, 5, KEY_O),
+	KEY(3, 6, KEY_LEFTALT),
+	KEY(3, 7, KEY_ENTER),
+	KEY(3, 8, KEY_BACKSPACE),
+	KEY(3, 9, KEY_P),
+	KEY(3, 10, KEY_B),
+	KEY(3, 11, KEY_FN),
+};
+
+const struct matrix_keymap_data palmtc_keymap_data = {
+	.keymap			= palmtc_matrix_keys,
+	.keymap_size		= ARRAY_SIZE(palmtc_matrix_keys),
+};
+
+const static unsigned int palmtc_keypad_row_gpios[] = {
+	0, 9, 10, 11
+};
+
+const static unsigned int palmtc_keypad_col_gpios[] = {
+	18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 79, 80
+};
+
+static struct matrix_keypad_platform_data palmtc_keypad_platform_data = {
+	.keymap_data	= &palmtc_keymap_data,
+	.col_gpios	= palmtc_keypad_row_gpios,
+	.num_col_gpios	= 12,
+	.row_gpios	= palmtc_keypad_col_gpios,
+	.num_row_gpios	= 4,
+	.active_low	= 1,
+
+	.debounce_ms		= 20,
+	.col_scan_delay_us	= 5,
+};
+
+static struct platform_device palmtc_keyboard = {
+	.name	= "matrix-keypad",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &palmtc_keypad_platform_data,
+	},
+};
+
+/******************************************************************************
+ * UDC
+ ******************************************************************************/
+static struct pxa2xx_udc_mach_info palmtc_udc_info __initdata = {
+	.gpio_vbus		= GPIO_NR_PALMTC_USB_DETECT_N,
+	.gpio_vbus_inverted	= 1,
+	.gpio_pullup		= GPIO_NR_PALMTC_USB_POWER,
+};
+
+/******************************************************************************
+ * Touchscreen / Battery / GPIO-extender
+ ******************************************************************************/
+static struct platform_device palmtc_ucb1400_core = {
+	.name	= "ucb1400_core",
+	.id	= -1,
+};
+
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+static struct resource palmtc_flash_resource = {
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_16M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct mtd_partition palmtc_flash_parts[] = {
+	{
+		.name	= "U-Boot Bootloader",
+		.offset	= 0x0,
+		.size	= 0x40000,
+	},
+	{
+		.name	= "Linux Kernel",
+		.offset	= 0x40000,
+		.size	= 0x2c0000,
+	},
+	{
+		.name	= "Filesystem",
+		.offset	= 0x300000,
+		.size	= 0xcc0000,
+	},
+	{
+		.name	= "U-Boot Environment",
+		.offset	= 0xfc0000,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data palmtc_flash_data = {
+	.width		= 4,
+	.parts		= palmtc_flash_parts,
+	.nr_parts	= ARRAY_SIZE(palmtc_flash_parts),
+};
+
+static struct platform_device palmtc_flash = {
+	.name		= "physmap-flash",
+	.id		= -1,
+	.resource	= &palmtc_flash_resource,
+	.num_resources	= 1,
+	.dev = {
+		.platform_data	= &palmtc_flash_data,
+	},
+};
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+static struct pxafb_mode_info palmtc_lcd_modes[] = {
+{
+	.pixclock	= 115384,
+	.xres		= 320,
+	.yres		= 320,
+	.bpp		= 16,
+
+	.left_margin	= 27,
+	.right_margin	= 7,
+	.upper_margin	= 7,
+	.lower_margin	= 8,
+
+	.hsync_len	= 6,
+	.vsync_len	= 1,
+},
+};
+
+static struct pxafb_mach_info palmtc_lcd_screen = {
+	.modes			= palmtc_lcd_modes,
+	.num_modes		= ARRAY_SIZE(palmtc_lcd_modes),
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+	&palmtc_backlight,
+	&palmtc_ucb1400_core,
+	&palmtc_keyboard,
+	&palmtc_pxa_keys,
+	&palmtc_flash,
+};
+
+static void __init palmtc_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtc_pin_config));
+
+	set_pxa_fb_info(&palmtc_lcd_screen);
+	pxa_set_mci_info(&palmtc_mci_platform_data);
+	pxa_set_udc_info(&palmtc_udc_info);
+	pxa_set_ac97_info(NULL);
+	pxa_set_ficp_info(&palmtc_ficp_platform_data);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+};
+
+MACHINE_START(PALMTC, "Palm Tungsten|C")
+	.phys_io	= 0x40000000,
+	.boot_params 	= 0xa0000100,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= palmtc_init
+MACHINE_END
-- 
cgit v1.2.3


From e2c509c7e63ffdeef21f292441c3d4ce73db9250 Mon Sep 17 00:00:00 2001
From: Philipp Zabel <philipp.zabel@gmail.com>
Date: Fri, 7 Aug 2009 17:01:04 +0200
Subject: [ARM] pxa/hx4700: use platform_lcd driver

Instead of directly registering an lcd_device, use the platform_lcd driver.
This fixes a broken build in case CONFIG_LCD_CLASS_DEVICE is not enabled.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Cc: Ben Dooks <ben-linux-arm@fluff.org>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/hx4700.c | 56 ++++++++++++++++++----------------------------
 1 file changed, 22 insertions(+), 34 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 81359d574f8..f2058721254 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -45,6 +45,7 @@
 #include <mach/irda.h>
 #include <mach/pxa2xx_spi.h>
 
+#include <video/platform_lcd.h>
 #include <video/w100fb.h>
 
 #include "devices.h"
@@ -368,8 +369,6 @@ static struct platform_device egpio = {
  * LCD - Sony display connected to ATI Imageon w3220
  */
 
-static int lcd_power;
-
 static void sony_lcd_init(void)
 {
 	gpio_set_value(GPIO84_HX4700_LCD_SQN, 1);
@@ -410,35 +409,6 @@ static void sony_lcd_off(void)
 	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
 }
 
-static int hx4700_lcd_set_power(struct lcd_device *ldev, int level)
-{
-	switch (level) {
-	case FB_BLANK_UNBLANK:
-		sony_lcd_init();
-		break;
-	case FB_BLANK_NORMAL:
-	case FB_BLANK_VSYNC_SUSPEND:
-	case FB_BLANK_HSYNC_SUSPEND:
-	case FB_BLANK_POWERDOWN:
-		sony_lcd_off();
-		break;
-	}
-	lcd_power = level;
-	return 0;
-}
-
-static int hx4700_lcd_get_power(struct lcd_device *lm)
-{
-	return lcd_power;
-}
-
-static struct lcd_ops hx4700_lcd_ops = {
-	.get_power = hx4700_lcd_get_power,
-	.set_power = hx4700_lcd_set_power,
-};
-
-static struct lcd_device *hx4700_lcd_device;
-
 #ifdef CONFIG_PM
 static void w3220_lcd_suspend(struct w100fb_par *wfb)
 {
@@ -573,6 +543,27 @@ static struct platform_device w3220 = {
 	.resource      = w3220_resources,
 };
 
+static void hx4700_lcd_set_power(struct plat_lcd_data *pd, unsigned int power)
+{
+	if (power)
+		sony_lcd_init();
+	else
+		sony_lcd_off();
+}
+
+static struct plat_lcd_data hx4700_lcd_data = {
+	.set_power = hx4700_lcd_set_power,
+};
+
+static struct platform_device hx4700_lcd = {
+	.name = "platform-lcd",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &hx4700_lcd_data,
+		.parent        = &w3220.dev,
+	},
+};
+
 /*
  * Backlight
  */
@@ -872,9 +863,6 @@ static void __init hx4700_init(void)
 	pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
 	spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));
 
-	hx4700_lcd_device = lcd_device_register("w100fb", NULL,
-					(void *)&w3220_info, &hx4700_lcd_ops);
-
 	gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 0);
 	mdelay(10);
 	gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 1);
-- 
cgit v1.2.3


From a90c4fb89a870dede5d69a7eb5cb320158e21aab Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.y.miao@gmail.com>
Date: Mon, 27 Jul 2009 16:58:50 +0800
Subject: [ARM] pxa/corgi: make use of GPIO based matrix keypad driver

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/corgi.c | 131 +++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 130 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 39a94585f97..0ff5ed80936 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -29,6 +29,7 @@
 #include <linux/spi/ads7846.h>
 #include <linux/spi/corgi_lcd.h>
 #include <linux/mtd/sharpsl.h>
+#include <linux/input/matrix_keypad.h>
 #include <video/w100fb.h>
 
 #include <asm/setup.h>
@@ -104,6 +105,28 @@ static unsigned long corgi_pin_config[] __initdata = {
 	GPIO6_MMC_CLK,
 	GPIO8_MMC_CS0,
 
+	/* GPIO Matrix Keypad */
+	GPIO66_GPIO,	/* column 0 */
+	GPIO67_GPIO,	/* column 1 */
+	GPIO68_GPIO,	/* column 2 */
+	GPIO69_GPIO,	/* column 3 */
+	GPIO70_GPIO,	/* column 4 */
+	GPIO71_GPIO,	/* column 5 */
+	GPIO72_GPIO,	/* column 6 */
+	GPIO73_GPIO,	/* column 7 */
+	GPIO74_GPIO,	/* column 8 */
+	GPIO75_GPIO,	/* column 9 */
+	GPIO76_GPIO,	/* column 10 */
+	GPIO77_GPIO,	/* column 11 */
+	GPIO58_GPIO,	/* row 0 */
+	GPIO59_GPIO,	/* row 1 */
+	GPIO60_GPIO,	/* row 2 */
+	GPIO61_GPIO,	/* row 3 */
+	GPIO62_GPIO,	/* row 4 */
+	GPIO63_GPIO,	/* row 5 */
+	GPIO64_GPIO,	/* row 6 */
+	GPIO65_GPIO,	/* row 7 */
+
 	/* GPIO */
 	GPIO9_GPIO,	/* CORGI_GPIO_nSD_DETECT */
 	GPIO7_GPIO,	/* CORGI_GPIO_nSD_WP */
@@ -267,9 +290,115 @@ static struct platform_device corgifb_device = {
 /*
  * Corgi Keyboard Device
  */
+#define CORGI_KEY_CALENDER	KEY_F1
+#define CORGI_KEY_ADDRESS	KEY_F2
+#define CORGI_KEY_FN		KEY_F3
+#define CORGI_KEY_CANCEL	KEY_F4
+#define CORGI_KEY_OFF		KEY_SUSPEND
+#define CORGI_KEY_EXOK		KEY_F5
+#define CORGI_KEY_EXCANCEL	KEY_F6
+#define CORGI_KEY_EXJOGDOWN	KEY_F7
+#define CORGI_KEY_EXJOGUP	KEY_F8
+#define CORGI_KEY_JAP1		KEY_LEFTCTRL
+#define CORGI_KEY_JAP2		KEY_LEFTALT
+#define CORGI_KEY_MAIL		KEY_F10
+#define CORGI_KEY_OK		KEY_F11
+#define CORGI_KEY_MENU		KEY_F12
+
+static const uint32_t corgikbd_keymap[] = {
+	KEY(0, 1, KEY_1),
+	KEY(0, 2, KEY_3),
+	KEY(0, 3, KEY_5),
+	KEY(0, 4, KEY_6),
+	KEY(0, 5, KEY_7),
+	KEY(0, 6, KEY_9),
+	KEY(0, 7, KEY_0),
+	KEY(0, 8, KEY_BACKSPACE),
+	KEY(1, 1, KEY_2),
+	KEY(1, 2, KEY_4),
+	KEY(1, 3, KEY_R),
+	KEY(1, 4, KEY_Y),
+	KEY(1, 5, KEY_8),
+	KEY(1, 6, KEY_I),
+	KEY(1, 7, KEY_O),
+	KEY(1, 8, KEY_P),
+	KEY(2, 0, KEY_TAB),
+	KEY(2, 1, KEY_Q),
+	KEY(2, 2, KEY_E),
+	KEY(2, 3, KEY_T),
+	KEY(2, 4, KEY_G),
+	KEY(2, 5, KEY_U),
+	KEY(2, 6, KEY_J),
+	KEY(2, 7, KEY_K),
+	KEY(3, 0, CORGI_KEY_CALENDER),
+	KEY(3, 1, KEY_W),
+	KEY(3, 2, KEY_S),
+	KEY(3, 3, KEY_F),
+	KEY(3, 4, KEY_V),
+	KEY(3, 5, KEY_H),
+	KEY(3, 6, KEY_M),
+	KEY(3, 7, KEY_L),
+	KEY(3, 9, KEY_RIGHTSHIFT),
+	KEY(4, 0, CORGI_KEY_ADDRESS),
+	KEY(4, 1, KEY_A),
+	KEY(4, 2, KEY_D),
+	KEY(4, 3, KEY_C),
+	KEY(4, 4, KEY_B),
+	KEY(4, 5, KEY_N),
+	KEY(4, 6, KEY_DOT),
+	KEY(4, 8, KEY_ENTER),
+	KEY(4, 10, KEY_LEFTSHIFT),
+	KEY(5, 0, CORGI_KEY_MAIL),
+	KEY(5, 1, KEY_Z),
+	KEY(5, 2, KEY_X),
+	KEY(5, 3, KEY_MINUS),
+	KEY(5, 4, KEY_SPACE),
+	KEY(5, 5, KEY_COMMA),
+	KEY(5, 7, KEY_UP),
+	KEY(5, 11, CORGI_KEY_FN),
+	KEY(6, 0, KEY_SYSRQ),
+	KEY(6, 1, CORGI_KEY_JAP1),
+	KEY(6, 2, CORGI_KEY_JAP2),
+	KEY(6, 3, CORGI_KEY_CANCEL),
+	KEY(6, 4, CORGI_KEY_OK),
+	KEY(6, 5, CORGI_KEY_MENU),
+	KEY(6, 6, KEY_LEFT),
+	KEY(6, 7, KEY_DOWN),
+	KEY(6, 8, KEY_RIGHT),
+	KEY(7, 0, CORGI_KEY_OFF),
+	KEY(7, 1, CORGI_KEY_EXOK),
+	KEY(7, 2, CORGI_KEY_EXCANCEL),
+	KEY(7, 3, CORGI_KEY_EXJOGDOWN),
+	KEY(7, 4, CORGI_KEY_EXJOGUP),
+};
+
+static struct matrix_keymap_data corgikbd_keymap_data = {
+	.keymap		= corgikbd_keymap,
+	.keymap_size	= ARRAY_SIZE(corgikbd_keymap),
+};
+
+static const int corgikbd_row_gpios[] =
+		{ 58, 59, 60, 61, 62, 63, 64, 65 };
+static const int corgikbd_col_gpios[] =
+		{ 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77 };
+
+static struct matrix_keypad_platform_data corgikbd_pdata = {
+	.keymap_data		= &corgikbd_keymap_data,
+	.row_gpios		= corgikbd_row_gpios,
+	.col_gpios		= corgikbd_col_gpios,
+	.num_row_gpios		= ARRAY_SIZE(corgikbd_row_gpios),
+	.num_col_gpios		= ARRAY_SIZE(corgikbd_col_gpios),
+	.col_scan_delay_us	= 10,
+	.debounce_ms		= 10,
+	.wakeup			= 1,
+};
+
 static struct platform_device corgikbd_device = {
-	.name		= "corgi-keyboard",
+	.name		= "matrix-keypad",
 	.id		= -1,
+	.dev		= {
+		.platform_data = &corgikbd_pdata,
+	},
 };
 
 /*
-- 
cgit v1.2.3


From 93dd29a818a0fdb485a8f10bac58f5993e55d9c8 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.y.miao@gmail.com>
Date: Mon, 27 Jul 2009 16:59:39 +0800
Subject: [ARM] pxa/spitz: make use of GPIO based matrix keypad driver

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/spitz.c | 129 +++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 128 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index da85327e630..c4b8305b66a 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -24,6 +24,7 @@
 #include <linux/spi/ads7846.h>
 #include <linux/spi/corgi_lcd.h>
 #include <linux/mtd/sharpsl.h>
+#include <linux/input/matrix_keypad.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -111,6 +112,26 @@ static unsigned long spitz_pin_config[] __initdata = {
 	GPIO105_GPIO,	/* SPITZ_GPIO_CF_IRQ */
 	GPIO106_GPIO,	/* SPITZ_GPIO_CF2_IRQ */
 
+	/* GPIO matrix keypad */
+	GPIO88_GPIO,	/* column 0 */
+	GPIO23_GPIO,	/* column 1 */
+	GPIO24_GPIO,	/* column 2 */
+	GPIO25_GPIO,	/* column 3 */
+	GPIO26_GPIO,	/* column 4 */
+	GPIO27_GPIO,	/* column 5 */
+	GPIO52_GPIO,	/* column 6 */
+	GPIO103_GPIO,	/* column 7 */
+	GPIO107_GPIO,	/* column 8 */
+	GPIO108_GPIO,	/* column 9 */
+	GPIO114_GPIO,	/* column 10 */
+	GPIO12_GPIO,	/* row 0 */
+	GPIO17_GPIO,	/* row 1 */
+	GPIO91_GPIO,	/* row 2 */
+	GPIO34_GPIO,	/* row 3 */
+	GPIO36_GPIO,	/* row 4 */
+	GPIO38_GPIO,	/* row 5 */
+	GPIO39_GPIO,	/* row 6 */
+
 	/* I2C */
 	GPIO117_I2C_SCL,
 	GPIO118_I2C_SDA,
@@ -242,9 +263,115 @@ EXPORT_SYMBOL(spitzscoop2_device);
 /*
  * Spitz Keyboard Device
  */
+#define SPITZ_KEY_CALENDAR	KEY_F1
+#define SPITZ_KEY_ADDRESS	KEY_F2
+#define SPITZ_KEY_FN		KEY_F3
+#define SPITZ_KEY_CANCEL	KEY_F4
+#define SPITZ_KEY_EXOK		KEY_F5
+#define SPITZ_KEY_EXCANCEL	KEY_F6
+#define SPITZ_KEY_EXJOGDOWN	KEY_F7
+#define SPITZ_KEY_EXJOGUP	KEY_F8
+#define SPITZ_KEY_JAP1		KEY_LEFTALT
+#define SPITZ_KEY_JAP2		KEY_RIGHTCTRL
+#define SPITZ_KEY_SYNC		KEY_F9
+#define SPITZ_KEY_MAIL		KEY_F10
+#define SPITZ_KEY_OK		KEY_F11
+#define SPITZ_KEY_MENU		KEY_F12
+
+static const uint32_t spitzkbd_keymap[] = {
+	KEY(0, 0, KEY_LEFTCTRL),
+	KEY(0, 1, KEY_1),
+	KEY(0, 2, KEY_3),
+	KEY(0, 3, KEY_5),
+	KEY(0, 4, KEY_6),
+	KEY(0, 5, KEY_7),
+	KEY(0, 6, KEY_9),
+	KEY(0, 7, KEY_0),
+	KEY(0, 8, KEY_BACKSPACE),
+	KEY(0, 9, SPITZ_KEY_EXOK),	/* EXOK */
+	KEY(0, 10, SPITZ_KEY_EXCANCEL),	/* EXCANCEL */
+	KEY(1, 1, KEY_2),
+	KEY(1, 2, KEY_4),
+	KEY(1, 3, KEY_R),
+	KEY(1, 4, KEY_Y),
+	KEY(1, 5, KEY_8),
+	KEY(1, 6, KEY_I),
+	KEY(1, 7, KEY_O),
+	KEY(1, 8, KEY_P),
+	KEY(1, 9, SPITZ_KEY_EXJOGDOWN),	/* EXJOGDOWN */
+	KEY(1, 10, SPITZ_KEY_EXJOGUP),	/* EXJOGUP */
+	KEY(2, 0, KEY_TAB),
+	KEY(2, 1, KEY_Q),
+	KEY(2, 2, KEY_E),
+	KEY(2, 3, KEY_T),
+	KEY(2, 4, KEY_G),
+	KEY(2, 5, KEY_U),
+	KEY(2, 6, KEY_J),
+	KEY(2, 7, KEY_K),
+	KEY(3, 0, SPITZ_KEY_ADDRESS),	/* ADDRESS */
+	KEY(3, 1, KEY_W),
+	KEY(3, 2, KEY_S),
+	KEY(3, 3, KEY_F),
+	KEY(3, 4, KEY_V),
+	KEY(3, 5, KEY_H),
+	KEY(3, 6, KEY_M),
+	KEY(3, 7, KEY_L),
+	KEY(3, 9, KEY_RIGHTSHIFT),
+	KEY(4, 0, SPITZ_KEY_CALENDAR),	/* CALENDAR */
+	KEY(4, 1, KEY_A),
+	KEY(4, 2, KEY_D),
+	KEY(4, 3, KEY_C),
+	KEY(4, 4, KEY_B),
+	KEY(4, 5, KEY_N),
+	KEY(4, 6, KEY_DOT),
+	KEY(4, 8, KEY_ENTER),
+	KEY(4, 9, KEY_LEFTSHIFT),
+	KEY(5, 0, SPITZ_KEY_MAIL),	/* MAIL */
+	KEY(5, 1, KEY_Z),
+	KEY(5, 2, KEY_X),
+	KEY(5, 3, KEY_MINUS),
+	KEY(5, 4, KEY_SPACE),
+	KEY(5, 5, KEY_COMMA),
+	KEY(5, 7, KEY_UP),
+	KEY(5, 10, SPITZ_KEY_FN),	/* FN */
+	KEY(6, 0, KEY_SYSRQ),
+	KEY(6, 1, SPITZ_KEY_JAP1),	/* JAP1 */
+	KEY(6, 2, SPITZ_KEY_JAP2),	/* JAP2 */
+	KEY(6, 3, SPITZ_KEY_CANCEL),	/* CANCEL */
+	KEY(6, 4, SPITZ_KEY_OK),	/* OK */
+	KEY(6, 5, SPITZ_KEY_MENU),	/* MENU */
+	KEY(6, 6, KEY_LEFT),
+	KEY(6, 7, KEY_DOWN),
+	KEY(6, 8, KEY_RIGHT),
+};
+
+static const struct matrix_keymap_data spitzkbd_keymap_data = {
+	.keymap		= spitzkbd_keymap,
+	.keymap_size	= ARRAY_SIZE(spitzkbd_keymap),
+};
+
+static const uint32_t spitzkbd_row_gpios[] =
+		{ 12, 17, 91, 34, 36, 38, 39 };
+static const uint32_t spitzkbd_col_gpios[] =
+		{ 88, 23, 24, 25, 26, 27, 52, 103, 107, 108, 114 };
+
+static struct matrix_keypad_platform_data spitzkbd_pdata = {
+	.keymap_data		= &spitzkbd_keymap_data,
+	.row_gpios		= spitzkbd_row_gpios,
+	.col_gpios		= spitzkbd_col_gpios,
+	.num_row_gpios		= ARRAY_SIZE(spitzkbd_row_gpios),
+	.num_col_gpios		= ARRAY_SIZE(spitzkbd_col_gpios),
+	.col_scan_delay_us	= 10,
+	.debounce_ms		= 10,
+	.wakeup			= 1,
+};
+
 static struct platform_device spitzkbd_device = {
-	.name		= "spitz-keyboard",
+	.name		= "matrix-keypad",
 	.id		= -1,
+	.dev		= {
+		.platform_data = &spitzkbd_pdata,
+	},
 };
 
 
-- 
cgit v1.2.3


From 7dafdf3d22a59499a1d4dddeb626c0bc76ef455d Mon Sep 17 00:00:00 2001
From: "walker@suse.cz" <walker@suse.cz>
Date: Mon, 31 Aug 2009 19:25:57 +0200
Subject: [ARM] pxa/treo680: pxamci simplify to use GPIO
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Tomáš Čech <sleep_walker@suse.cz>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/treo680.c | 84 +++------------------------------------------
 1 file changed, 4 insertions(+), 80 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/treo680.c b/arch/arm/mach-pxa/treo680.c
index 753ec4df17b..5d3ec080770 100644
--- a/arch/arm/mach-pxa/treo680.c
+++ b/arch/arm/mach-pxa/treo680.c
@@ -153,87 +153,11 @@ static unsigned long treo680_pin_config[] __initdata = {
 /******************************************************************************
  * SD/MMC card controller
  ******************************************************************************/
-static int treo680_mci_init(struct device *dev,
-		irq_handler_t treo680_detect_int, void *data)
-{
-	int err = 0;
-
-	/* Setup an interrupt for detecting card insert/remove events */
-	err = gpio_request(GPIO_NR_TREO680_SD_DETECT_N, "SD IRQ");
-
-	if (err)
-		goto err;
-
-	err = gpio_direction_input(GPIO_NR_TREO680_SD_DETECT_N);
-	if (err)
-		goto err2;
-
-	err = request_irq(gpio_to_irq(GPIO_NR_TREO680_SD_DETECT_N),
-			treo680_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
-			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-			"SD/MMC card detect", data);
-
-	if (err) {
-		dev_err(dev, "%s: cannot request SD/MMC card detect IRQ\n",
-			     __func__);
-		goto err2;
-	}
-
-	err = gpio_request(GPIO_NR_TREO680_SD_POWER, "SD_POWER");
-	if (err)
-		goto err3;
-
-	err = gpio_direction_output(GPIO_NR_TREO680_SD_POWER, 1);
-	if (err)
-		goto err4;
-
-	err = gpio_request(GPIO_NR_TREO680_SD_READONLY, "SD_READONLY");
-	if (err)
-		goto err4;
-
-	err = gpio_direction_input(GPIO_NR_TREO680_SD_READONLY);
-	if (err)
-		goto err5;
-
-	return 0;
-
-err5:
-	gpio_free(GPIO_NR_TREO680_SD_READONLY);
-err4:
-	gpio_free(GPIO_NR_TREO680_SD_POWER);
-err3:
-	free_irq(gpio_to_irq(GPIO_NR_TREO680_SD_DETECT_N), data);
-err2:
-	gpio_free(GPIO_NR_TREO680_SD_DETECT_N);
-err:
-	return err;
-}
-
-static void treo680_mci_exit(struct device *dev, void *data)
-{
-	gpio_free(GPIO_NR_TREO680_SD_READONLY);
-	gpio_free(GPIO_NR_TREO680_SD_POWER);
-	free_irq(gpio_to_irq(GPIO_NR_TREO680_SD_DETECT_N), data);
-	gpio_free(GPIO_NR_TREO680_SD_DETECT_N);
-}
-
-static void treo680_mci_power(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *p_d = dev->platform_data;
-	gpio_set_value(GPIO_NR_TREO680_SD_POWER, p_d->ocr_mask & (1 << vdd));
-}
-
-static int treo680_mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO_NR_TREO680_SD_READONLY);
-}
-
 static struct pxamci_platform_data treo680_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.setpower	= treo680_mci_power,
-	.get_ro		= treo680_mci_get_ro,
-	.init 		= treo680_mci_init,
-	.exit		= treo680_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO_NR_TREO680_SD_DETECT_N,
+	.gpio_card_ro		= GPIO_NR_TREO680_SD_READONLY,
+	.gpio_power		= GPIO_NR_TREO680_SD_POWER,
 };
 
 /******************************************************************************
-- 
cgit v1.2.3


From 28d7a94680b16673af27779b289b4be2abd2e248 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Tom=C3=A1=C5=A1=20=C4=8Cech?= <sleep_walker@suse.cz>
Date: Thu, 3 Sep 2009 16:55:47 +0200
Subject: [ARM] pxa/treo680: move LCD power GPIO to proper place
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Tomáš Čech <sleep_walker@suse.cz>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/treo680.c | 36 +++++++++++++++++++++++++++---------
 1 file changed, 27 insertions(+), 9 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/treo680.c b/arch/arm/mach-pxa/treo680.c
index 5d3ec080770..9a2df64c659 100644
--- a/arch/arm/mach-pxa/treo680.c
+++ b/arch/arm/mach-pxa/treo680.c
@@ -254,16 +254,9 @@ static int treo680_backlight_init(struct device *dev)
 	ret = gpio_direction_output(GPIO_NR_TREO680_BL_POWER, 0);
 	if (ret)
 		goto err2;
-	ret = gpio_request(GPIO_NR_TREO680_LCD_POWER, "LCD POWER");
-	if (ret)
-		goto err2;
-	ret = gpio_direction_output(GPIO_NR_TREO680_LCD_POWER, 0);
-	if (ret)
-		goto err3;
 
 	return 0;
-err3:
-	gpio_free(GPIO_NR_TREO680_LCD_POWER);
+
 err2:
 	gpio_free(GPIO_NR_TREO680_BL_POWER);
 err:
@@ -279,7 +272,6 @@ static int treo680_backlight_notify(int brightness)
 static void treo680_backlight_exit(struct device *dev)
 {
 	gpio_free(GPIO_NR_TREO680_BL_POWER);
-	gpio_free(GPIO_NR_TREO680_LCD_POWER);
 }
 
 static struct platform_pwm_backlight_data treo680_backlight_data = {
@@ -470,6 +462,11 @@ static struct pxafb_mode_info treo680_lcd_modes[] = {
 },
 };
 
+static void treo680_lcd_power(int on, struct fb_var_screeninfo *info)
+{
+	gpio_set_value(GPIO_NR_TREO680_BL_POWER, on);
+}
+
 static struct pxafb_mach_info treo680_lcd_screen = {
 	.modes		= treo680_lcd_modes,
 	.num_modes	= ARRAY_SIZE(treo680_lcd_modes),
@@ -509,11 +506,32 @@ static void __init treo680_udc_init(void)
 	}
 }
 
+static void __init treo680_lcd_power_init(void)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_TREO680_LCD_POWER, "LCD POWER");
+	if (ret) {
+		pr_err("Treo680: LCD power GPIO request failed!\n");
+		return;
+	}
+
+	ret = gpio_direction_output(GPIO_NR_TREO680_LCD_POWER, 0);
+	if (ret) {
+		pr_err("Treo680: setting LCD power GPIO direction failed!\n");
+		gpio_free(GPIO_NR_TREO680_LCD_POWER);
+		return;
+	}
+
+	treo680_lcd_screen.pxafb_lcd_power = treo680_lcd_power;
+}
+
 static void __init treo680_init(void)
 {
 	treo680_pm_init();
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config));
 	pxa_set_keypad_info(&treo680_keypad_platform_data);
+	treo680_lcd_power_init();
 	set_pxa_fb_info(&treo680_lcd_screen);
 	pxa_set_mci_info(&treo680_mci_platform_data);
 	treo680_udc_init();
-- 
cgit v1.2.3


From 51238bfefb92d15d07c15aec8c6a8fcc7b228e8c Mon Sep 17 00:00:00 2001
From: Matej Kenda <matejken@gmail.com>
Date: Mon, 7 Sep 2009 14:08:34 +0800
Subject: [ARM] pxa: add support for the IskraTel XCEP board
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Added support for the Iskratel XCEP single board computer, embedded in
instruments used in particle accelerators.

The patch contains the platform specific code, Makefile and Kconfig
changes for platform arm-pxa.

Signed-off-by: Aleš Bardorfer <ales.bardorfer@i-tech.si>
Signed-off-by: Michael Abbott <michael.abbott@diamond.ac.uk>
Signed-off-by: Matej Kenda <matej.kenda@i-tech.si>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/Kconfig  |  15 ++++
 arch/arm/mach-pxa/Makefile |   2 +
 arch/arm/mach-pxa/xcep.c   | 187 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 204 insertions(+)
 create mode 100644 arch/arm/mach-pxa/xcep.c

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index d1dcb1cf075..b3cdfe55c03 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -504,6 +504,21 @@ config MACH_EZX_E2
 	default y
 	depends on PXA_EZX
 
+config MACH_XCEP
+	bool "Iskratel Electronics XCEP"
+	select PXA25x
+	select MTD
+	select MTD_PARTITIONS
+	select MTD_PHYSMAP
+	select MTD_CFI_INTELEXT
+	select MTD_CFI
+	select MTD_CHAR
+	select SMC91X
+	select PXA_SSP
+	help
+	  PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
+	  Tuned for usage in Libera instruments for particle accelerators.
+
 endmenu
 
 config PXA25x
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index aa8f83e9421..c9890a124cf 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -79,6 +79,8 @@ obj-$(CONFIG_MACH_ARMCORE)      += cm-x2xx.o cm-x255.o cm-x270.o
 obj-$(CONFIG_MACH_CM_X300)      += cm-x300.o
 obj-$(CONFIG_PXA_EZX)           += ezx.o
 
+obj-$(CONFIG_MACH_XCEP)         += xcep.o
+
 obj-$(CONFIG_MACH_INTELMOTE2)   += imote2.o
 obj-$(CONFIG_MACH_STARGATE2)	+= stargate2.o
 obj-$(CONFIG_MACH_CSB726)	+= csb726.o
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
new file mode 100644
index 00000000000..3fd79cbb36c
--- /dev/null
+++ b/arch/arm/mach-pxa/xcep.c
@@ -0,0 +1,187 @@
+/*  linux/arch/arm/mach-pxa/xcep.c
+ *
+ *  Support for the Iskratel Electronics XCEP platform as used in
+ *  the Libera instruments from Instrumentation Technologies.
+ *
+ *  Author:     Ales Bardorfer <ales@i-tech.si>
+ *  Contributions by: Abbott, MG (Michael) <michael.abbott@diamond.ac.uk>
+ *  Contributions by: Matej Kenda <matej.kenda@i-tech.si>
+ *  Created:    June 2006
+ *  Copyright:  (C) 2006-2009 Instrumentation Technologies
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/smc91x.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+
+#include <plat/i2c.h>
+
+#include <mach/hardware.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+
+#include "generic.h"
+
+#define XCEP_ETH_PHYS		(PXA_CS3_PHYS + 0x00000300)
+#define XCEP_ETH_PHYS_END	(PXA_CS3_PHYS + 0x000fffff)
+#define XCEP_ETH_ATTR		(PXA_CS3_PHYS + 0x02000000)
+#define XCEP_ETH_ATTR_END	(PXA_CS3_PHYS + 0x020fffff)
+#define XCEP_ETH_IRQ		IRQ_GPIO0
+
+/*  XCEP CPLD base */
+#define XCEP_CPLD_BASE		0xf0000000
+
+
+/* Flash partitions. */
+
+static struct mtd_partition xcep_partitions[] = {
+	{
+		.name =		"Bootloader",
+		.size =		0x00040000,
+		.offset =	0,
+		.mask_flags =	MTD_WRITEABLE
+	}, {
+		.name =		"Bootloader ENV",
+		.size =		0x00040000,
+		.offset =	0x00040000,
+		.mask_flags =	MTD_WRITEABLE
+	}, {
+		.name =		"Kernel",
+		.size =		0x00100000,
+		.offset =	0x00080000,
+	}, {
+		.name =		"Rescue fs",
+		.size =		0x00280000,
+		.offset =	0x00180000,
+	}, {
+		.name =		"Filesystem",
+		.size =		MTDPART_SIZ_FULL,
+		.offset =	0x00400000
+	}
+};
+
+static struct physmap_flash_data xcep_flash_data[] = {
+	{
+		.width		= 4,		/* bankwidth in bytes */
+		.parts		= xcep_partitions,
+		.nr_parts	= ARRAY_SIZE(xcep_partitions)
+	}
+};
+
+static struct resource flash_resource = {
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_32M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.dev 	= {
+		.platform_data = xcep_flash_data,
+	},
+	.resource = &flash_resource,
+	.num_resources = 1,
+};
+
+
+
+/* SMC LAN91C111 network controller. */
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.name	= "smc91x-regs",
+		.start	= XCEP_ETH_PHYS,
+		.end	= XCEP_ETH_PHYS_END,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= XCEP_ETH_IRQ,
+		.end	= XCEP_ETH_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.name	= "smc91x-attrib",
+		.start	= XCEP_ETH_ATTR,
+		.end	= XCEP_ETH_ATTR_END,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct smc91x_platdata xcep_smc91x_info = {
+	.flags	= SMC91X_USE_32BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &xcep_smc91x_info,
+	},
+};
+
+
+static struct platform_device *devices[] __initdata = {
+	&flash_device,
+	&smc91x_device,
+};
+
+
+/* We have to state that there are HWMON devices on the I2C bus on XCEP.
+ * Drivers for HWMON verify capabilities of the adapter when loading and
+ * refuse to attach if the adapter doesn't support HWMON class of devices.
+ * See also Documentation/i2c/porting-clients. */
+static struct i2c_pxa_platform_data xcep_i2c_platform_data  = {
+	.class = I2C_CLASS_HWMON
+};
+
+
+static mfp_cfg_t xcep_pin_config[] __initdata = {
+	GPIO79_nCS_3,	/* SMC 91C111 chip select. */
+	GPIO80_nCS_4,	/* CPLD chip select. */
+	/* SSP communication to MSP430 */
+	GPIO23_SSP1_SCLK,
+	GPIO24_SSP1_SFRM,
+	GPIO25_SSP1_TXD,
+	GPIO26_SSP1_RXD,
+	GPIO27_SSP1_EXTCLK
+};
+
+static void __init xcep_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(xcep_pin_config));
+
+	/* See Intel XScale Developer's Guide for details */
+	/* Set RDF and RDN to appropriate values (chip select 3 (smc91x)) */
+	MSC1 = (MSC1 & 0xffff) | 0xD5540000;
+	/* Set RDF and RDN to appropriate values (chip select 5 (fpga)) */
+	MSC2 = (MSC2 & 0xffff) | 0x72A00000;
+
+	platform_add_devices(ARRAY_AND_SIZE(devices));
+	pxa_set_i2c_info(&xcep_i2c_platform_data);
+}
+
+MACHINE_START(XCEP, "Iskratel XCEP")
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.init_machine	= xcep_init,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.timer		= &pxa_timer,
+MACHINE_END
+
-- 
cgit v1.2.3


From 23440f85ff2ffce96155736b50238aa0b94a358f Mon Sep 17 00:00:00 2001
From: Matej Kenda <matejken@gmail.com>
Date: Mon, 7 Sep 2009 14:14:29 +0800
Subject: [ARM] pxa: add defconfig for IskraTel XCEP board

Signed-off-by: Matej Kenda <matej.kenda@i-tech.si>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/configs/xcep_defconfig | 1129 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 1129 insertions(+)
 create mode 100644 arch/arm/configs/xcep_defconfig

(limited to 'arch/arm')

diff --git a/arch/arm/configs/xcep_defconfig b/arch/arm/configs/xcep_defconfig
new file mode 100644
index 00000000000..33bb7250946
--- /dev/null
+++ b/arch/arm/configs/xcep_defconfig
@@ -0,0 +1,1129 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc6
+# Thu Aug 20 09:02:37 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=".xcep-itech"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+# CONFIG_SHMEM is not set
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+# CONFIG_SLUB is not set
+CONFIG_SLOB=y
+# CONFIG_PROFILING is not set
+CONFIG_TRACEPOINTS=y
+CONFIG_MARKERS=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLOCK is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_MACH_STARGATE2 is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_COLIBRI300 is not set
+# CONFIG_MACH_COLIBRI320 is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_H4700 is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_MACH_CSB726 is not set
+# CONFIG_PXA_EZX is not set
+CONFIG_MACH_XCEP=y
+CONFIG_PXA25x=y
+CONFIG_PXA_SSP=y
+CONFIG_PLAT_PXA=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=mtd4 rootfstype=jffs2 ro console=ttyS0,115200"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=m
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_PXA2XX=y
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+
+#
+# SCSI device support
+#
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=m
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=m
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+CONFIG_SENSORS_ADM1021=m
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+CONFIG_SENSORS_MAX6650=m
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SA1100=m
+# CONFIG_RTC_DRV_PXA is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_FILE_LOCKING=y
+# CONFIG_FSNOTIFY is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_FS_WBUF_VERIFY=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="utf8"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=m
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
-- 
cgit v1.2.3


From 2a23ec3679d84ac243add761fa3d3872cf6dcb11 Mon Sep 17 00:00:00 2001
From: Jonathan McDowell <noodles@earth.li>
Date: Sat, 4 Jul 2009 14:43:56 +0100
Subject: [ARM] pxa: balloon3 (http://balloonboard.org/) base machine support

So, again against latest pxa-linux-2.6/devel, with the following
changes:

 * Move to __raw_readl/__raw_writel for FPGA/CPLD register access
 * Change Toppoly LCD config to be selectable at run time rather than
   compile time.
 * Remove currently unused irq device suspend/resume functions.
 * Strip out unnecessary/duplicated #includes.
 * Some code style cleanups.

Balloon3 (http://balloonboard.org/) base machine support

Signed-off-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/Kconfig                   |   6 +
 arch/arm/mach-pxa/Makefile                  |   1 +
 arch/arm/mach-pxa/balloon3.c                | 361 ++++++++++++++++++++++++++++
 arch/arm/mach-pxa/include/mach/balloon3.h   | 134 +++++++++++
 arch/arm/mach-pxa/include/mach/irqs.h       |  10 +
 arch/arm/mach-pxa/include/mach/uncompress.h |   2 +-
 6 files changed, 513 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-pxa/balloon3.c
 create mode 100644 arch/arm/mach-pxa/include/mach/balloon3.h

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index b3cdfe55c03..a6f8eab14ba 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -84,6 +84,12 @@ config MACH_MP900C
 	bool "Nec Mobilepro 900/c"
 	select PXA25x
 
+config MACH_BALLOON3
+	bool "Balloon 3 board"
+	select PXA27x
+	select IWMMXT
+	select PXA_HAVE_BOARD_IRQS
+
 config ARCH_PXA_IDP
 	bool "Accelent Xscale IDP"
 	select PXA25x
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index c9890a124cf..f10e152bfc2 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_GUMSTIX_AM300EPD)	+= am300epd.o
 obj-$(CONFIG_ARCH_LUBBOCK)	+= lubbock.o
 obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
 obj-$(CONFIG_MACH_MAINSTONE)	+= mainstone.o
+obj-$(CONFIG_MACH_BALLOON3)	+= balloon3.o
 obj-$(CONFIG_MACH_MP900C)	+= mp900.o
 obj-$(CONFIG_ARCH_PXA_IDP)	+= idp.o
 obj-$(CONFIG_MACH_TRIZEPS4)	+= trizeps4.o
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
new file mode 100644
index 00000000000..f23138b8fca
--- /dev/null
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -0,0 +1,361 @@
+/*
+ *  linux/arch/arm/mach-pxa/balloon3.c
+ *
+ *  Support for Balloonboard.org Balloon3 board.
+ *
+ *  Author:	Nick Bane, Wookey, Jonathan McDowell
+ *  Created:	June, 2006
+ *  Copyright:	Toby Churchill Ltd
+ *  Derived from mainstone.c, by Nico Pitre
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/bitops.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/ioport.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/types.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include <mach/pxa27x.h>
+#include <mach/balloon3.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/irda.h>
+#include <mach/ohci.h>
+
+#include <plat/i2c.h>
+
+#include "generic.h"
+#include "devices.h"
+
+static unsigned long balloon3_irq_enabled;
+
+static unsigned long balloon3_features_present =
+		(1 << BALLOON3_FEATURE_OHCI) | (1 << BALLOON3_FEATURE_CF) |
+		(1 << BALLOON3_FEATURE_AUDIO) |
+		(1 << BALLOON3_FEATURE_TOPPOLY);
+
+int balloon3_has(enum balloon3_features feature)
+{
+	return (balloon3_features_present & (1 << feature)) ? 1 : 0;
+}
+EXPORT_SYMBOL_GPL(balloon3_has);
+
+int __init parse_balloon3_features(char *arg)
+{
+	if (!arg)
+		return 0;
+
+	return strict_strtoul(arg, 0, &balloon3_features_present);
+}
+early_param("balloon3_features", parse_balloon3_features);
+
+static void balloon3_mask_irq(unsigned int irq)
+{
+	int balloon3_irq = (irq - BALLOON3_IRQ(0));
+	balloon3_irq_enabled &= ~(1 << balloon3_irq);
+	__raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
+}
+
+static void balloon3_unmask_irq(unsigned int irq)
+{
+	int balloon3_irq = (irq - BALLOON3_IRQ(0));
+	balloon3_irq_enabled |= (1 << balloon3_irq);
+	__raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
+}
+
+static struct irq_chip balloon3_irq_chip = {
+	.name		= "FPGA",
+	.ack		= balloon3_mask_irq,
+	.mask		= balloon3_mask_irq,
+	.unmask		= balloon3_unmask_irq,
+};
+
+static void balloon3_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned long pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
+					balloon3_irq_enabled;
+
+	do {
+		/* clear useless edge notification */
+		if (desc->chip->ack)
+			desc->chip->ack(BALLOON3_AUX_NIRQ);
+		while (pending) {
+			irq = BALLOON3_IRQ(0) + __ffs(pending);
+			generic_handle_irq(irq);
+			pending &= pending - 1;
+		}
+		pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
+				balloon3_irq_enabled;
+	} while (pending);
+}
+
+static void __init balloon3_init_irq(void)
+{
+	int irq;
+
+	pxa27x_init_irq();
+	/* setup extra Balloon3 irqs */
+	for (irq = BALLOON3_IRQ(0); irq <= BALLOON3_IRQ(7); irq++) {
+		set_irq_chip(irq, &balloon3_irq_chip);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+	}
+
+	set_irq_chained_handler(BALLOON3_AUX_NIRQ, balloon3_irq_handler);
+	set_irq_type(BALLOON3_AUX_NIRQ, IRQ_TYPE_EDGE_FALLING);
+
+	pr_debug("%s: chained handler installed - irq %d automatically "
+		"enabled\n", __func__, BALLOON3_AUX_NIRQ);
+}
+
+static void balloon3_backlight_power(int on)
+{
+	pr_debug("%s: power is %s\n", __func__, on ? "on" : "off");
+	gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on);
+}
+
+static unsigned long balloon3_lcd_pin_config[] = {
+	/* LCD - 16bpp Active TFT */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	GPIO99_GPIO,		/* Backlight */
+};
+
+static struct pxafb_mode_info balloon3_lcd_modes[] = {
+	{
+		.pixclock		= 38000,
+		.xres			= 480,
+		.yres			= 640,
+		.bpp			= 16,
+		.hsync_len		= 8,
+		.left_margin		= 8,
+		.right_margin		= 8,
+		.vsync_len		= 2,
+		.upper_margin		= 4,
+		.lower_margin		= 5,
+		.sync			= 0,
+	},
+};
+
+static struct pxafb_mach_info balloon3_pxafb_info = {
+	.modes			= balloon3_lcd_modes,
+	.num_modes		= ARRAY_SIZE(balloon3_lcd_modes),
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+	.pxafb_backlight_power	= balloon3_backlight_power,
+};
+
+static unsigned long balloon3_mmc_pin_config[] = {
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+};
+
+static void balloon3_mci_setpower(struct device *dev, unsigned int vdd)
+{
+	struct pxamci_platform_data *p_d = dev->platform_data;
+
+	if ((1 << vdd) & p_d->ocr_mask) {
+		pr_debug("%s: on\n", __func__);
+		/* FIXME something to prod here? */
+	} else {
+		pr_debug("%s: off\n", __func__);
+		/* FIXME something to prod here? */
+	}
+}
+
+static struct pxamci_platform_data balloon3_mci_platform_data = {
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.setpower 	= balloon3_mci_setpower,
+};
+
+static int balloon3_udc_is_connected(void)
+{
+	pr_debug("%s: udc connected\n", __func__);
+	return 1;
+}
+
+static void balloon3_udc_command(int cmd)
+{
+	switch (cmd) {
+	case PXA2XX_UDC_CMD_CONNECT:
+		UP2OCR |= (UP2OCR_DPPUE + UP2OCR_DPPUBE);
+		pr_debug("%s: connect\n", __func__);
+		break;
+	case PXA2XX_UDC_CMD_DISCONNECT:
+		UP2OCR &= ~UP2OCR_DPPUE;
+		pr_debug("%s: disconnect\n", __func__);
+		break;
+	}
+}
+
+static struct pxa2xx_udc_mach_info balloon3_udc_info = {
+	.udc_is_connected = balloon3_udc_is_connected,
+	.udc_command      = balloon3_udc_command,
+};
+
+static struct pxaficp_platform_data balloon3_ficp_platform_data = {
+	.transceiver_cap  = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+};
+
+static unsigned long balloon3_ohci_pin_config[] = {
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+};
+
+static struct pxaohci_platform_data balloon3_ohci_platform_data = {
+	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+static unsigned long balloon3_pin_config[] __initdata = {
+	/* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* Wakeup GPIO */
+	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+
+	/* NAND & IDLE LED GPIOs */
+	GPIO9_GPIO,
+	GPIO10_GPIO,
+};
+
+static struct gpio_led balloon3_gpio_leds[] = {
+	{
+		.name			= "balloon3:green:idle",
+		.default_trigger	= "heartbeat",
+		.gpio			= BALLOON3_GPIO_LED_IDLE,
+		.active_low		= 1,
+	},
+	{
+		.name			= "balloon3:green:nand",
+		.default_trigger	= "nand-disk",
+		.gpio			= BALLOON3_GPIO_LED_NAND,
+		.active_low		= 1,
+	},
+};
+
+static struct gpio_led_platform_data balloon3_gpio_leds_platform_data = {
+	.leds		= balloon3_gpio_leds,
+	.num_leds	= ARRAY_SIZE(balloon3_gpio_leds),
+};
+
+static struct platform_device balloon3led_device = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &balloon3_gpio_leds_platform_data,
+	},
+};
+
+static void __init balloon3_init(void)
+{
+	pr_info("Initialising Balloon3\n");
+
+	/* system bus arbiter setting
+	 * - Core_Park
+	 * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
+	 */
+	ARB_CNTRL = ARB_CORE_PARK | 0x234;
+
+	pxa_set_i2c_info(NULL);
+	if (balloon3_has(BALLOON3_FEATURE_AUDIO))
+		pxa_set_ac97_info(NULL);
+
+	if (balloon3_has(BALLOON3_FEATURE_TOPPOLY)) {
+		pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config));
+		gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT,
+			"LCD Backlight Power");
+		gpio_direction_output(BALLOON3_GPIO_RUN_BACKLIGHT, 1);
+		set_pxa_fb_info(&balloon3_pxafb_info);
+	}
+
+	if (balloon3_has(BALLOON3_FEATURE_MMC)) {
+		pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_mmc_pin_config));
+		pxa_set_mci_info(&balloon3_mci_platform_data);
+	}
+	pxa_set_ficp_info(&balloon3_ficp_platform_data);
+	if (balloon3_has(BALLOON3_FEATURE_OHCI)) {
+		pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ohci_pin_config));
+		pxa_set_ohci_info(&balloon3_ohci_platform_data);
+	}
+	pxa_set_udc_info(&balloon3_udc_info);
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_pin_config));
+
+	platform_device_register(&balloon3led_device);
+}
+
+static struct map_desc balloon3_io_desc[] __initdata = {
+	{	/* CPLD/FPGA */
+		.virtual	=  BALLOON3_FPGA_VIRT,
+		.pfn		= __phys_to_pfn(BALLOON3_FPGA_PHYS),
+		.length		= BALLOON3_FPGA_LENGTH,
+		.type		= MT_DEVICE,
+	},
+};
+
+static void __init balloon3_map_io(void)
+{
+	pxa_map_io();
+	iotable_init(balloon3_io_desc, ARRAY_SIZE(balloon3_io_desc));
+}
+
+MACHINE_START(BALLOON3, "Balloon3")
+	/* Maintainer: Nick Bane. */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io		= balloon3_map_io,
+	.init_irq	= balloon3_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= balloon3_init,
+	.boot_params	= PHYS_OFFSET + 0x100,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h
new file mode 100644
index 00000000000..bfec09b1814
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/balloon3.h
@@ -0,0 +1,134 @@
+/*
+ *  linux/include/asm-arm/arch-pxa/balloon3.h
+ *
+ *  Authors:	Nick Bane and Wookey
+ *  Created:	Oct, 2005
+ *  Copyright:	Toby Churchill Ltd
+ *  Cribbed from mainstone.c, by Nicholas Pitre
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ASM_ARCH_BALLOON3_H
+#define ASM_ARCH_BALLOON3_H
+
+enum balloon3_features {
+	BALLOON3_FEATURE_OHCI,
+	BALLOON3_FEATURE_MMC,
+	BALLOON3_FEATURE_CF,
+	BALLOON3_FEATURE_AUDIO,
+	BALLOON3_FEATURE_TOPPOLY,
+};
+
+#define BALLOON3_FPGA_PHYS	PXA_CS4_PHYS
+#define BALLOON3_FPGA_VIRT	(0xf1000000)	/* as per balloon2 */
+#define BALLOON3_FPGA_LENGTH	0x01000000
+
+/* FPGA/CPLD registers */
+#define BALLOON3_PCMCIA0_REG		(BALLOON3_FPGA_VIRT + 0x00e00008)
+/* fixme - same for now */
+#define BALLOON3_PCMCIA1_REG		(BALLOON3_FPGA_VIRT + 0x00e00008)
+#define BALLOON3_NANDIO_IO_REG		(BALLOON3_FPGA_VIRT + 0x00e00000)
+/* fpga/cpld interrupt control register */
+#define BALLOON3_INT_CONTROL_REG	(BALLOON3_FPGA_VIRT + 0x00e0000C)
+#define BALLOON3_NANDIO_CTL2_REG 	(BALLOON3_FPGA_VIRT + 0x00e00010)
+#define BALLOON3_NANDIO_CTL_REG 	(BALLOON3_FPGA_VIRT + 0x00e00014)
+#define BALLOON3_VERSION_REG		(BALLOON3_FPGA_VIRT + 0x00e0001c)
+
+#define BALLOON3_SAMOSA_ADDR_REG	(BALLOON3_FPGA_VIRT + 0x00c00000)
+#define BALLOON3_SAMOSA_DATA_REG	(BALLOON3_FPGA_VIRT + 0x00c00004)
+#define BALLOON3_SAMOSA_STATUS_REG	(BALLOON3_FPGA_VIRT + 0x00c0001c)
+
+/* GPIOs for irqs */
+#define BALLOON3_GPIO_AUX_NIRQ		(94)
+#define BALLOON3_GPIO_CODEC_IRQ		(95)
+
+/* Timer and Idle LED locations */
+#define BALLOON3_GPIO_LED_NAND		(9)
+#define BALLOON3_GPIO_LED_IDLE		(10)
+
+/* backlight control */
+#define BALLOON3_GPIO_RUN_BACKLIGHT	(99)
+
+#define BALLOON3_GPIO_S0_CD		(105)
+
+/* FPGA Interrupt Mask/Acknowledge Register */
+#define BALLOON3_INT_S0_IRQ		(1 << 0)  /* PCMCIA 0 IRQ */
+#define BALLOON3_INT_S0_STSCHG		(1 << 1)  /* PCMCIA 0 status changed */
+
+/* CF Status Register */
+#define BALLOON3_PCMCIA_nIRQ		(1 << 0)  /* IRQ / ready signal */
+#define BALLOON3_PCMCIA_nSTSCHG_BVD1	(1 << 1)
+					/* VDD sense / card status changed */
+
+/* CF control register (write) */
+#define BALLOON3_PCMCIA_RESET		(1 << 0)   /* Card reset signal */
+#define BALLOON3_PCMCIA_ENABLE		(1 << 1)
+#define BALLOON3_PCMCIA_ADD_ENABLE	(1 << 2)
+
+/* CPLD (and FPGA) interface definitions */
+#define CPLD_LCD0_DATA_SET             0x00
+#define CPLD_LCD0_DATA_CLR             0x10
+#define CPLD_LCD0_COMMAND_SET          0x01
+#define CPLD_LCD0_COMMAND_CLR          0x11
+#define CPLD_LCD1_DATA_SET             0x02
+#define CPLD_LCD1_DATA_CLR             0x12
+#define CPLD_LCD1_COMMAND_SET          0x03
+#define CPLD_LCD1_COMMAND_CLR          0x13
+
+#define CPLD_MISC_SET                  0x07
+#define CPLD_MISC_CLR                  0x17
+#define CPLD_MISC_LOON_NRESET_BIT      0
+#define CPLD_MISC_LOON_UNSUSP_BIT      1
+#define CPLD_MISC_RUN_5V_BIT           2
+#define CPLD_MISC_CHG_D0_BIT           3
+#define CPLD_MISC_CHG_D1_BIT           4
+#define CPLD_MISC_DAC_NCS_BIT          5
+
+#define CPLD_LCD_SET                   0x08
+#define CPLD_LCD_CLR                   0x18
+#define CPLD_LCD_BACKLIGHT_EN_0_BIT    0
+#define CPLD_LCD_BACKLIGHT_EN_1_BIT    1
+#define CPLD_LCD_LED_RED_BIT           4
+#define CPLD_LCD_LED_GREEN_BIT         5
+#define CPLD_LCD_NRESET_BIT            7
+
+#define CPLD_LCD_RO_SET                0x09
+#define CPLD_LCD_RO_CLR                0x19
+#define CPLD_LCD_RO_LCD0_nWAIT_BIT     0
+#define CPLD_LCD_RO_LCD1_nWAIT_BIT     1
+
+#define CPLD_SERIAL_SET                0x0a
+#define CPLD_SERIAL_CLR                0x1a
+#define CPLD_SERIAL_GSM_RI_BIT         0
+#define CPLD_SERIAL_GSM_CTS_BIT        1
+#define CPLD_SERIAL_GSM_DTR_BIT        2
+#define CPLD_SERIAL_LPR_CTS_BIT        3
+#define CPLD_SERIAL_TC232_CTS_BIT      4
+#define CPLD_SERIAL_TC232_DSR_BIT      5
+
+#define CPLD_SROUTING_SET              0x0b
+#define CPLD_SROUTING_CLR              0x1b
+#define CPLD_SROUTING_MSP430_LPR       0
+#define CPLD_SROUTING_MSP430_TC232     1
+#define CPLD_SROUTING_MSP430_GSM       2
+#define CPLD_SROUTING_LOON_LPR         (0 << 4)
+#define CPLD_SROUTING_LOON_TC232       (1 << 4)
+#define CPLD_SROUTING_LOON_GSM         (2 << 4)
+
+#define CPLD_AROUTING_SET              0x0c
+#define CPLD_AROUTING_CLR              0x1c
+#define CPLD_AROUTING_MIC2PHONE_BIT    0
+#define CPLD_AROUTING_PHONE2INT_BIT    1
+#define CPLD_AROUTING_PHONE2EXT_BIT    2
+#define CPLD_AROUTING_LOONL2INT_BIT    3
+#define CPLD_AROUTING_LOONL2EXT_BIT    4
+#define CPLD_AROUTING_LOONR2PHONE_BIT  5
+#define CPLD_AROUTING_LOONR2INT_BIT    6
+#define CPLD_AROUTING_LOONR2EXT_BIT    7
+
+extern int balloon3_has(enum balloon3_features feature);
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index 567204c3959..3677a9af9c8 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -263,6 +263,16 @@
 #define MAINSTONE_S1_STSCHG_IRQ	MAINSTONE_IRQ(14)
 #define MAINSTONE_S1_IRQ	MAINSTONE_IRQ(15)
 
+/* Balloon3 Interrupts */
+#define BALLOON3_IRQ(x)		(IRQ_BOARD_START + (x))
+
+#define BALLOON3_BP_CF_NRDY_IRQ	BALLOON3_IRQ(0)
+#define BALLOON3_BP_NSTSCHG_IRQ	BALLOON3_IRQ(1)
+
+#define BALLOON3_AUX_NIRQ	IRQ_GPIO(BALLOON3_GPIO_AUX_NIRQ)
+#define BALLOON3_CODEC_IRQ	IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ)
+#define BALLOON3_S0_CD_IRQ	IRQ_GPIO(BALLOON3_GPIO_S0_CD)
+
 /* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
 #define IRQ_LOCOMO_KEY_BASE	(IRQ_BOARD_START + 0)
 #define IRQ_LOCOMO_GPIO_BASE	(IRQ_BOARD_START + 1)
diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h
index b54749413e9..237734b5b1b 100644
--- a/arch/arm/mach-pxa/include/mach/uncompress.h
+++ b/arch/arm/mach-pxa/include/mach/uncompress.h
@@ -37,7 +37,7 @@ static inline void arch_decomp_setup(void)
 {
 	if (machine_is_littleton() || machine_is_intelmote2()
 	    || machine_is_csb726() || machine_is_stargate2()
-	    || machine_is_cm_x300())
+	    || machine_is_cm_x300() || machine_is_balloon3())
 		UART = STUART;
 }
 
-- 
cgit v1.2.3


From c4bd01727380ce666aba987b3d7c0e838cb99bbe Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Fri, 17 Jul 2009 12:50:43 +0200
Subject: [ARM] pxa: add gpio_pwdown(_inverted) into pxaficp_ir.c

and convert PXA-based devices to gpio_pwdown where possible.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/corgi.c             | 27 +-------------------
 arch/arm/mach-pxa/e740.c              |  1 -
 arch/arm/mach-pxa/e750.c              |  1 -
 arch/arm/mach-pxa/eseries.c           | 39 ++---------------------------
 arch/arm/mach-pxa/hx4700.c            |  9 ++-----
 arch/arm/mach-pxa/include/mach/irda.h |  2 ++
 arch/arm/mach-pxa/lubbock.c           |  5 ++--
 arch/arm/mach-pxa/magician.c          | 10 ++------
 arch/arm/mach-pxa/mainstone.c         |  5 ++--
 arch/arm/mach-pxa/palmld.c            | 30 ++---------------------
 arch/arm/mach-pxa/palmt5.c            | 30 ++---------------------
 arch/arm/mach-pxa/palmtc.c            | 30 ++---------------------
 arch/arm/mach-pxa/palmte2.c           | 30 ++---------------------
 arch/arm/mach-pxa/palmtx.c            | 30 ++---------------------
 arch/arm/mach-pxa/palmz72.c           | 28 +--------------------
 arch/arm/mach-pxa/poodle.c            | 27 +-------------------
 arch/arm/mach-pxa/pxa2xx.c            |  1 +
 arch/arm/mach-pxa/spitz.c             | 46 +++--------------------------------
 arch/arm/mach-pxa/tosa.c              |  9 ++++---
 arch/arm/mach-pxa/treo680.c           | 39 ++---------------------------
 arch/arm/mach-pxa/trizeps4.c          |  1 +
 21 files changed, 40 insertions(+), 360 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 0ff5ed80936..b536b5a5a10 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -447,34 +447,9 @@ static struct pxamci_platform_data corgi_mci_platform_data = {
 /*
  * Irda
  */
-static void corgi_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(CORGI_GPIO_IR_ON, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
-static int corgi_irda_startup(struct device *dev)
-{
-	int err;
-
-	err = gpio_request(CORGI_GPIO_IR_ON, "IR_ON");
-	if (err)
-		return err;
-
-	gpio_direction_output(CORGI_GPIO_IR_ON, 1);
-	return 0;
-}
-
-static void corgi_irda_shutdown(struct device *dev)
-{
-	gpio_free(CORGI_GPIO_IR_ON);
-}
-
 static struct pxaficp_platform_data corgi_ficp_platform_data = {
+	.gpio_pwdown		= CORGI_GPIO_IR_ON,
 	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-	.transceiver_mode	= corgi_irda_transceiver_mode,
-	.startup		= corgi_irda_startup,
-	.shutdown		= corgi_irda_shutdown,
 };
 
 
diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c
index a36fc17f671..49acdfa6650 100644
--- a/arch/arm/mach-pxa/e740.c
+++ b/arch/arm/mach-pxa/e740.c
@@ -199,7 +199,6 @@ static void __init e740_init(void)
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	pxa_set_udc_info(&e7xx_udc_mach_info);
 	pxa_set_ac97_info(NULL);
-	e7xx_irda_init();
 	pxa_set_ficp_info(&e7xx_ficp_platform_data);
 }
 
diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c
index 1d00110590e..4052ece3ef4 100644
--- a/arch/arm/mach-pxa/e750.c
+++ b/arch/arm/mach-pxa/e750.c
@@ -200,7 +200,6 @@ static void __init e750_init(void)
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	pxa_set_udc_info(&e7xx_udc_mach_info);
 	pxa_set_ac97_info(NULL);
-	e7xx_irda_init();
 	pxa_set_ficp_info(&e7xx_ficp_platform_data);
 }
 
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index c60dadf847a..91417f03506 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -47,44 +47,9 @@ struct pxa2xx_udc_mach_info e7xx_udc_mach_info = {
 	.gpio_pullup_inverted = 1
 };
 
-static void e7xx_irda_transceiver_mode(struct device *dev, int mode)
-{
-	if (mode & IR_OFF) {
-		gpio_set_value(GPIO_E7XX_IR_OFF, 1);
-		pxa2xx_transceiver_mode(dev, mode);
-	} else {
-		pxa2xx_transceiver_mode(dev, mode);
-		gpio_set_value(GPIO_E7XX_IR_OFF, 0);
-	}
-}
-
-int e7xx_irda_init(void)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_E7XX_IR_OFF, "IrDA power");
-	if (ret)
-		goto out;
-
-	ret = gpio_direction_output(GPIO_E7XX_IR_OFF, 0);
-	if (ret)
-		goto out;
-
-	e7xx_irda_transceiver_mode(NULL, IR_SIRMODE | IR_OFF);
-out:
-	return ret;
-}
-
-static void e7xx_irda_shutdown(struct device *dev)
-{
-	e7xx_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
-	gpio_free(GPIO_E7XX_IR_OFF);
-}
-
 struct pxaficp_platform_data e7xx_ficp_platform_data = {
-	.transceiver_cap  = IR_SIRMODE | IR_OFF,
-	.transceiver_mode = e7xx_irda_transceiver_mode,
-	.shutdown = e7xx_irda_shutdown,
+	.gpio_pwdown		= GPIO_E7XX_IR_OFF,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
 int eseries_tmio_enable(struct platform_device *dev)
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index f2058721254..abff9e13274 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -175,14 +175,9 @@ static int hx4700_gpio_request(struct gpio_ress *gpios, int size)
  * IRDA
  */
 
-static void irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(GPIO105_HX4700_nIR_ON, mode & IR_OFF);
-}
-
 static struct pxaficp_platform_data ficp_info = {
-	.transceiver_cap  = IR_SIRMODE | IR_OFF,
-	.transceiver_mode = irda_transceiver_mode,
+	.gpio_pwdown		= GPIO105_HX4700_nIR_ON,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
 /*
diff --git a/arch/arm/mach-pxa/include/mach/irda.h b/arch/arm/mach-pxa/include/mach/irda.h
index 0a50c3c763d..3cd41f77dda 100644
--- a/arch/arm/mach-pxa/include/mach/irda.h
+++ b/arch/arm/mach-pxa/include/mach/irda.h
@@ -12,6 +12,8 @@ struct pxaficp_platform_data {
 	void (*transceiver_mode)(struct device *dev, int mode);
 	int (*startup)(struct device *dev);
 	void (*shutdown)(struct device *dev);
+	int gpio_pwdown;		/* powerdown GPIO for the IrDA chip */
+	bool gpio_pwdown_inverted;	/* gpio_pwdown is inverted */
 };
 
 extern void pxa_set_ficp_info(struct pxaficp_platform_data *info);
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 1785cc9494d..c6a94d3fdd6 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -507,8 +507,9 @@ static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
 }
 
 static struct pxaficp_platform_data lubbock_ficp_platform_data = {
-	.transceiver_cap  = IR_SIRMODE | IR_FIRMODE,
-	.transceiver_mode = lubbock_irda_transceiver_mode,
+	.gpio_pwdown		= -1,
+	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE,
+	.transceiver_mode	= lubbock_irda_transceiver_mode,
 };
 
 static void __init lubbock_init(void)
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 0daba43d7ca..5360c07f513 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -140,15 +140,9 @@ static unsigned long magician_pin_config[] __initdata = {
  * IRDA
  */
 
-static void magician_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(GPIO83_MAGICIAN_nIR_EN, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
 static struct pxaficp_platform_data magician_ficp_info = {
-	.transceiver_cap  = IR_SIRMODE | IR_OFF,
-	.transceiver_mode = magician_irda_transceiver_mode,
+	.gpio_pwdown		= GPIO83_MAGICIAN_nIR_EN,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
 /*
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index f7dc23078ce..a4eeae345e6 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -479,8 +479,9 @@ static void mainstone_irda_transceiver_mode(struct device *dev, int mode)
 }
 
 static struct pxaficp_platform_data mainstone_ficp_platform_data = {
-	.transceiver_cap  = IR_SIRMODE | IR_FIRMODE | IR_OFF,
-	.transceiver_mode = mainstone_irda_transceiver_mode,
+	.gpio_pwdown		= -1,
+	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
+	.transceiver_mode	= mainstone_irda_transceiver_mode,
 };
 
 static struct gpio_keys_button gpio_keys_button[] = {
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index b3ae8b958ad..1ad029dd443 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -304,35 +304,9 @@ static struct platform_device palmld_backlight = {
 /******************************************************************************
  * IrDA
  ******************************************************************************/
-static int palmld_irda_startup(struct device *dev)
-{
-	int err;
-	err = gpio_request(GPIO_NR_PALMLD_IR_DISABLE, "IR DISABLE");
-	if (err)
-		goto err;
-	err = gpio_direction_output(GPIO_NR_PALMLD_IR_DISABLE, 1);
-	if (err)
-		gpio_free(GPIO_NR_PALMLD_IR_DISABLE);
-err:
-	return err;
-}
-
-static void palmld_irda_shutdown(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMLD_IR_DISABLE);
-}
-
-static void palmld_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(GPIO_NR_PALMLD_IR_DISABLE, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
 static struct pxaficp_platform_data palmld_ficp_platform_data = {
-	.startup		= palmld_irda_startup,
-	.shutdown		= palmld_irda_shutdown,
-	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
-	.transceiver_mode	= palmld_irda_transceiver_mode,
+	.gpio_pwdown		= GPIO_NR_PALMLD_IR_DISABLE,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
 /******************************************************************************
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 88dcaac358a..2dd7ce28556 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -243,35 +243,9 @@ static struct platform_device palmt5_backlight = {
 /******************************************************************************
  * IrDA
  ******************************************************************************/
-static int palmt5_irda_startup(struct device *dev)
-{
-	int err;
-	err = gpio_request(GPIO_NR_PALMT5_IR_DISABLE, "IR DISABLE");
-	if (err)
-		goto err;
-	err = gpio_direction_output(GPIO_NR_PALMT5_IR_DISABLE, 1);
-	if (err)
-		gpio_free(GPIO_NR_PALMT5_IR_DISABLE);
-err:
-	return err;
-}
-
-static void palmt5_irda_shutdown(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMT5_IR_DISABLE);
-}
-
-static void palmt5_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(GPIO_NR_PALMT5_IR_DISABLE, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
 static struct pxaficp_platform_data palmt5_ficp_platform_data = {
-	.startup		= palmt5_irda_startup,
-	.shutdown		= palmt5_irda_shutdown,
-	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
-	.transceiver_mode	= palmt5_irda_transceiver_mode,
+	.gpio_pwdown		= GPIO_NR_PALMT5_IR_DISABLE,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
 /******************************************************************************
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index f70f1f820ee..bb2cc0dd44e 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -218,35 +218,9 @@ static struct platform_device palmtc_backlight = {
 /******************************************************************************
  * IrDA
  ******************************************************************************/
-static int palmtc_irda_startup(struct device *dev)
-{
-	int err;
-	err = gpio_request(GPIO_NR_PALMTC_IR_DISABLE, "IR DISABLE");
-	if (err)
-		goto err;
-	err = gpio_direction_output(GPIO_NR_PALMTC_IR_DISABLE, 1);
-	if (err)
-		gpio_free(GPIO_NR_PALMTC_IR_DISABLE);
-err:
-	return err;
-}
-
-static void palmtc_irda_shutdown(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMTC_IR_DISABLE);
-}
-
-static void palmtc_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(GPIO_NR_PALMTC_IR_DISABLE, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
 static struct pxaficp_platform_data palmtc_ficp_platform_data = {
-	.startup		= palmtc_irda_startup,
-	.shutdown		= palmtc_irda_shutdown,
-	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
-	.transceiver_mode	= palmtc_irda_transceiver_mode,
+	.gpio_pwdown		= GPIO_NR_PALMTC_IR_DISABLE,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
 /******************************************************************************
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index d9ef76c9278..277c4062e3c 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -215,35 +215,9 @@ static struct platform_device palmte2_backlight = {
 /******************************************************************************
  * IrDA
  ******************************************************************************/
-static int palmte2_irda_startup(struct device *dev)
-{
-	int err;
-	err = gpio_request(GPIO_NR_PALMTE2_IR_DISABLE, "IR DISABLE");
-	if (err)
-		goto err;
-	err = gpio_direction_output(GPIO_NR_PALMTE2_IR_DISABLE, 1);
-	if (err)
-		gpio_free(GPIO_NR_PALMTE2_IR_DISABLE);
-err:
-	return err;
-}
-
-static void palmte2_irda_shutdown(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMTE2_IR_DISABLE);
-}
-
-static void palmte2_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(GPIO_NR_PALMTE2_IR_DISABLE, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
 static struct pxaficp_platform_data palmte2_ficp_platform_data = {
-	.startup		= palmte2_irda_startup,
-	.shutdown		= palmte2_irda_shutdown,
-	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
-	.transceiver_mode	= palmte2_irda_transceiver_mode,
+	.gpio_pwdown		= GPIO_NR_PALMTE2_IR_DISABLE,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
 /******************************************************************************
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index c0aca18b71b..76a2b37eaf3 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -303,35 +303,9 @@ static struct platform_device palmtx_backlight = {
 /******************************************************************************
  * IrDA
  ******************************************************************************/
-static int palmtx_irda_startup(struct device *dev)
-{
-	int err;
-	err = gpio_request(GPIO_NR_PALMTX_IR_DISABLE, "IR DISABLE");
-	if (err)
-		goto err;
-	err = gpio_direction_output(GPIO_NR_PALMTX_IR_DISABLE, 1);
-	if (err)
-		gpio_free(GPIO_NR_PALMTX_IR_DISABLE);
-err:
-	return err;
-}
-
-static void palmtx_irda_shutdown(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMTX_IR_DISABLE);
-}
-
-static void palmtx_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(GPIO_NR_PALMTX_IR_DISABLE, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
 static struct pxaficp_platform_data palmtx_ficp_platform_data = {
-	.startup		= palmtx_irda_startup,
-	.shutdown		= palmtx_irda_shutdown,
-	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
-	.transceiver_mode	= palmtx_irda_transceiver_mode,
+	.gpio_pwdown		= GPIO_NR_PALMTX_IR_DISABLE,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
 /******************************************************************************
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index d8fa53c1917..c2bf493c5f5 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -230,35 +230,9 @@ static struct platform_device palmz72_backlight = {
 /******************************************************************************
  * IrDA
  ******************************************************************************/
-static int palmz72_irda_startup(struct device *dev)
-{
-	int err;
-	err = gpio_request(GPIO_NR_PALMZ72_IR_DISABLE, "IR DISABLE");
-	if (err)
-		goto err;
-	err = gpio_direction_output(GPIO_NR_PALMZ72_IR_DISABLE, 1);
-	if (err)
-		gpio_free(GPIO_NR_PALMZ72_IR_DISABLE);
-err:
-	return err;
-}
-
-static void palmz72_irda_shutdown(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMZ72_IR_DISABLE);
-}
-
-static void palmz72_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(GPIO_NR_PALMZ72_IR_DISABLE, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
 static struct pxaficp_platform_data palmz72_ficp_platform_data = {
-	.startup		= palmz72_irda_startup,
-	.shutdown		= palmz72_irda_shutdown,
+	.gpio_pwdown		= GPIO_NR_PALMZ72_IR_DISABLE,
 	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-	.transceiver_mode	= palmz72_irda_transceiver_mode,
 };
 
 /******************************************************************************
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 333b1dc2dd3..a186994f77f 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -302,34 +302,9 @@ static struct pxamci_platform_data poodle_mci_platform_data = {
 /*
  * Irda
  */
-static void poodle_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(POODLE_GPIO_IR_ON, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
-static int poodle_irda_startup(struct device *dev)
-{
-	int err;
-
-	err = gpio_request(POODLE_GPIO_IR_ON, "IR_ON");
-	if (err)
-		return err;
-
-	gpio_direction_output(POODLE_GPIO_IR_ON, 1);
-	return 0;
-}
-
-static void poodle_irda_shutdown(struct device *dev)
-{
-	gpio_free(POODLE_GPIO_IR_ON);
-}
-
 static struct pxaficp_platform_data poodle_ficp_platform_data = {
+	.gpio_pwdown		= POODLE_GPIO_IR_ON,
 	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-	.transceiver_mode	= poodle_irda_transceiver_mode,
-	.startup		= poodle_irda_startup,
-	.shutdown		= poodle_irda_shutdown,
 };
 
 
diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c
index 2f3394f8591..868270421b8 100644
--- a/arch/arm/mach-pxa/pxa2xx.c
+++ b/arch/arm/mach-pxa/pxa2xx.c
@@ -52,3 +52,4 @@ void pxa2xx_transceiver_mode(struct device *dev, int mode)
 	} else
 		BUG();
 }
+EXPORT_SYMBOL_GPL(pxa2xx_transceiver_mode);
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index c4b8305b66a..f9dc59c054b 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -560,50 +560,10 @@ static struct pxaohci_platform_data spitz_ohci_platform_data = {
 /*
  * Irda
  */
-static int spitz_irda_startup(struct device *dev)
-{
-	int rc;
-
-	rc = gpio_request(SPITZ_GPIO_IR_ON, "IrDA on");
-	if (rc)
-		goto err;
-
-	rc = gpio_direction_output(SPITZ_GPIO_IR_ON, 1);
-	if (rc)
-		goto err_dir;
-
-	return 0;
-
-err_dir:
-	gpio_free(SPITZ_GPIO_IR_ON);
-err:
-	return rc;
-}
-
-static void spitz_irda_shutdown(struct device *dev)
-{
-	gpio_free(SPITZ_GPIO_IR_ON);
-}
-
-static void spitz_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(SPITZ_GPIO_IR_ON, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
-#ifdef CONFIG_MACH_AKITA
-static void akita_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(AKITA_GPIO_IR_ON, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-#endif
 
 static struct pxaficp_platform_data spitz_ficp_platform_data = {
+/* .gpio_pwdown is set in spitz_init() and akita_init() accordingly */
 	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-	.transceiver_mode	= spitz_irda_transceiver_mode,
-	.startup		= spitz_irda_startup,
-	.shutdown		= spitz_irda_shutdown,
 };
 
 
@@ -782,6 +742,8 @@ static void __init common_init(void)
 #if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
 static void __init spitz_init(void)
 {
+	spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON;
+
 	platform_scoop_config = &spitz_pcmcia_config;
 
 	common_init();
@@ -824,7 +786,7 @@ static struct nand_ecclayout akita_oobinfo = {
 
 static void __init akita_init(void)
 {
-	spitz_ficp_platform_data.transceiver_mode = akita_irda_transceiver_mode;
+	spitz_ficp_platform_data.gpio_pwdown = AKITA_GPIO_IR_ON;
 
 	sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt;
 	sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo;
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index b56cc5667bb..e81a52673d4 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -337,10 +337,11 @@ static void tosa_irda_shutdown(struct device *dev)
 }
 
 static struct pxaficp_platform_data tosa_ficp_platform_data = {
-	.transceiver_cap  = IR_SIRMODE | IR_OFF,
-	.transceiver_mode = tosa_irda_transceiver_mode,
-	.startup = tosa_irda_startup,
-	.shutdown = tosa_irda_shutdown,
+	.gpio_pwdown		= -1,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
+	.transceiver_mode	= tosa_irda_transceiver_mode,
+	.startup		= tosa_irda_startup,
+	.shutdown		= tosa_irda_shutdown,
 };
 
 /*
diff --git a/arch/arm/mach-pxa/treo680.c b/arch/arm/mach-pxa/treo680.c
index 9a2df64c659..fe085076fbf 100644
--- a/arch/arm/mach-pxa/treo680.c
+++ b/arch/arm/mach-pxa/treo680.c
@@ -295,44 +295,9 @@ static struct platform_device treo680_backlight = {
 /******************************************************************************
  * IrDA
  ******************************************************************************/
-static void treo680_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(GPIO_NR_TREO680_IR_EN, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
-static int treo680_irda_startup(struct device *dev)
-{
-	int err;
-
-	err = gpio_request(GPIO_NR_TREO680_IR_EN, "Ir port disable");
-	if (err)
-		goto err1;
-
-	err = gpio_direction_output(GPIO_NR_TREO680_IR_EN, 1);
-	if (err)
-		goto err2;
-
-	return 0;
-
-err2:
-	dev_err(dev, "treo680_irda: cannot change IR gpio direction\n");
-	gpio_free(GPIO_NR_TREO680_IR_EN);
-err1:
-	dev_err(dev, "treo680_irda: cannot allocate IR gpio\n");
-	return err;
-}
-
-static void treo680_irda_shutdown(struct device *dev)
-{
-	gpio_free(GPIO_NR_TREO680_IR_EN);
-}
-
 static struct pxaficp_platform_data treo680_ficp_info = {
-	.transceiver_cap  = IR_FIRMODE | IR_SIRMODE | IR_OFF,
-	.startup          = treo680_irda_startup,
-	.shutdown         = treo680_irda_shutdown,
-	.transceiver_mode = treo680_transceiver_mode,
+	.gpio_pwdown		= GPIO_NR_TREO680_IR_EN,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
 /******************************************************************************
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 32299869b35..3981e0356d1 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -415,6 +415,7 @@ static void trizeps4_irda_transceiver_mode(struct device *dev, int mode)
 }
 
 static struct pxaficp_platform_data trizeps4_ficp_platform_data = {
+	.gpio_pwdown		= -1,
 	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
 	.transceiver_mode	= trizeps4_irda_transceiver_mode,
 	.startup		= trizeps4_irda_startup,
-- 
cgit v1.2.3


From bd96f37895197563bc1d6d6f7c012b3ae7df1c45 Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Fri, 4 Sep 2009 23:46:18 -0700
Subject: Input: pxa27x_keypad - allow modifying keymap from userspace

Tested-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 arch/arm/mach-pxa/include/mach/pxa27x_keypad.h | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h b/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
index 63e8965ad85..7b4eadc6df3 100644
--- a/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
+++ b/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
@@ -6,6 +6,8 @@
 
 #define MAX_MATRIX_KEY_ROWS	(8)
 #define MAX_MATRIX_KEY_COLS	(8)
+#define MATRIX_ROW_SHIFT	(3)
+#define MAX_DIRECT_KEY_NUM	(8)
 
 /* pxa3xx keypad platform specific parameters
  *
@@ -34,7 +36,7 @@ struct pxa27x_keypad_platform_data {
 
 	/* direct keys */
 	int		direct_key_num;
-	unsigned int	direct_key_map[8];
+	unsigned int	direct_key_map[MAX_DIRECT_KEY_NUM];
 
 	/* rotary encoders 0 */
 	int		enable_rotary0;
-- 
cgit v1.2.3


From 52a7a1cec88acdaf3f8b36a6b1fe904f6eca7ee5 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Thu, 10 Sep 2009 15:26:30 +0200
Subject: [ARM] pxafb: add accelerator ID for PXA3xx GCU

Add ID 99 for PXA3xx frame buffers and report it in the pxa frame buffer
conditionally, depending on a new flag in struct pxafb_mach_info.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: linux-fbdev-devel@lists.sourceforge.net
Cc: Dennis Oliver Kropp <dok@directfb.org>
Cc: Sven Neumann <s.neumann@raumfeld.com>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/include/mach/pxafb.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h
index 6932720ba04..f73061c90b5 100644
--- a/arch/arm/mach-pxa/include/mach/pxafb.h
+++ b/arch/arm/mach-pxa/include/mach/pxafb.h
@@ -118,7 +118,8 @@ struct pxafb_mach_info {
 	u_int		fixed_modes:1,
 			cmap_inverse:1,
 			cmap_static:1,
-			unused:29;
+			acceleration_enabled:1,
+			unused:28;
 
 	/* The following should be defined in LCCR0
 	 *      LCCR0_Act or LCCR0_Pas          Active or Passive
-- 
cgit v1.2.3


From b7cfda9fc3d7aa60cffab5367f2a72a4a70060cd Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Mon, 7 Sep 2009 15:06:42 +0100
Subject: ARM: Fix pfn_valid() for sparse memory

On OMAP platforms, some people want to declare to segment up the memory
between the kernel and a separate application such that there is a hole
in the middle of the memory as far as Linux is concerned.  However,
they want to be able to mmap() the hole.

This currently causes problems, because update_mmu_cache() thinks that
there are valid struct pages for the "hole".  Fix this by making
pfn_valid() slightly more expensive, by checking whether the PFN is
contained within the meminfo array.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Khasim Syed Mohammed <khasim@ti.com>
---
 arch/arm/include/asm/memory.h | 17 -----------------
 arch/arm/include/asm/page.h   |  4 ++++
 arch/arm/mm/init.c            | 32 ++++++++++++++++++++++++++++++++
 3 files changed, 36 insertions(+), 17 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 85763db8744..b3b54c6216a 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -212,7 +212,6 @@ static inline __deprecated void *bus_to_virt(unsigned long x)
  *
  *  page_to_pfn(page)	convert a struct page * to a PFN number
  *  pfn_to_page(pfn)	convert a _valid_ PFN number to struct page *
- *  pfn_valid(pfn)	indicates whether a PFN number is valid
  *
  *  virt_to_page(k)	convert a _valid_ virtual address to struct page *
  *  virt_addr_valid(k)	indicates whether a virtual address is valid
@@ -221,10 +220,6 @@ static inline __deprecated void *bus_to_virt(unsigned long x)
 
 #define ARCH_PFN_OFFSET		PHYS_PFN_OFFSET
 
-#ifndef CONFIG_SPARSEMEM
-#define pfn_valid(pfn)		((pfn) >= PHYS_PFN_OFFSET && (pfn) < (PHYS_PFN_OFFSET + max_mapnr))
-#endif
-
 #define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
 #define virt_addr_valid(kaddr)	((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory)
 
@@ -241,18 +236,6 @@ static inline __deprecated void *bus_to_virt(unsigned long x)
 #define arch_pfn_to_nid(pfn)	PFN_TO_NID(pfn)
 #define arch_local_page_offset(pfn, nid) LOCAL_MAP_NR((pfn) << PAGE_SHIFT)
 
-#define pfn_valid(pfn)						\
-	({							\
-		unsigned int nid = PFN_TO_NID(pfn);		\
-		int valid = nid < MAX_NUMNODES;			\
-		if (valid) {					\
-			pg_data_t *node = NODE_DATA(nid);	\
-			valid = (pfn - node->node_start_pfn) <	\
-				node->node_spanned_pages;	\
-		}						\
-		valid;						\
-	})
-
 #define virt_to_page(kaddr)					\
 	(ADDR_TO_MAPBASE(kaddr) + LOCAL_MAP_NR(kaddr))
 
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index 9c746af1bf6..3a32af4cce3 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -194,6 +194,10 @@ typedef unsigned long pgprot_t;
 
 typedef struct page *pgtable_t;
 
+#ifndef CONFIG_SPARSEMEM
+extern int pfn_valid(unsigned long);
+#endif
+
 #include <asm/memory.h>
 
 #endif /* !__ASSEMBLY__ */
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 3a7279c1ce5..ea36186f32c 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -15,6 +15,7 @@
 #include <linux/mman.h>
 #include <linux/nodemask.h>
 #include <linux/initrd.h>
+#include <linux/sort.h>
 #include <linux/highmem.h>
 
 #include <asm/mach-types.h>
@@ -349,12 +350,43 @@ static void __init bootmem_free_node(int node, struct meminfo *mi)
 	free_area_init_node(node, zone_size, min, zhole_size);
 }
 
+#ifndef CONFIG_SPARSEMEM
+int pfn_valid(unsigned long pfn)
+{
+	struct meminfo *mi = &meminfo;
+	unsigned int left = 0, right = mi->nr_banks;
+
+	do {
+		unsigned int mid = (right + left) / 2;
+		struct membank *bank = &mi->bank[mid];
+
+		if (pfn < bank_pfn_start(bank))
+			right = mid;
+		else if (pfn >= bank_pfn_end(bank))
+			left = mid + 1;
+		else
+			return 1;
+	} while (left < right);
+	return 0;
+}
+EXPORT_SYMBOL(pfn_valid);
+#endif
+
+static int __init meminfo_cmp(const void *_a, const void *_b)
+{
+	const struct membank *a = _a, *b = _b;
+	long cmp = bank_pfn_start(a) - bank_pfn_start(b);
+	return cmp < 0 ? -1 : cmp > 0 ? 1 : 0;
+}
+
 void __init bootmem_init(void)
 {
 	struct meminfo *mi = &meminfo;
 	unsigned long min, max_low, max_high;
 	int node, initrd_node;
 
+	sort(&mi->bank, mi->nr_banks, sizeof(mi->bank[0]), meminfo_cmp, NULL);
+
 	/*
 	 * Locate which node contains the ramdisk image, if any.
 	 */
-- 
cgit v1.2.3


From f17a1f06d2fa93f4825be572622eb02c4894db4e Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Tue, 4 Aug 2009 01:01:02 +0100
Subject: ARM: 5636/1: Move vendor enum to AMBA include

This moves the primecell vendor enum definition inside vic.c
out to linux/amba/bus.h where it belongs and replace any
occurances of specific vendor ID:s with the respective enums
instead.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/common/vic.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index bc1f9ad61ff..920ced0b73c 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -22,6 +22,7 @@
 #include <linux/list.h>
 #include <linux/io.h>
 #include <linux/sysdev.h>
+#include <linux/amba/bus.h>
 
 #include <asm/mach/irq.h>
 #include <asm/hardware/vic.h>
@@ -272,11 +273,6 @@ static struct irq_chip vic_chip = {
 static void vik_init_st(void __iomem *base, unsigned int irq_start,
 			 u32 vic_sources);
 
-enum vic_vendor {
-	VENDOR_ARM = 0x41,
-	VENDOR_ST = 0x80,
-};
-
 /**
  * vic_init - initialise a vectored interrupt controller
  * @base: iomem base address
@@ -289,7 +285,7 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 {
 	unsigned int i;
 	u32 cellid = 0;
-	enum vic_vendor vendor;
+	enum amba_vendor vendor;
 
 	/* Identify which VIC cell this one is, by reading the ID */
 	for (i = 0; i < 4; i++) {
@@ -301,13 +297,13 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 	       base, cellid, vendor);
 
 	switch(vendor) {
-	case VENDOR_ST:
+	case AMBA_VENDOR_ST:
 		vik_init_st(base, irq_start, vic_sources);
 		return;
 	default:
 		printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
 		/* fall through */
-	case VENDOR_ARM:
+	case AMBA_VENDOR_ARM:
 		break;
 	}
 
-- 
cgit v1.2.3


From c1cb6b7fb5190ad55b31aa3289d48fedd288ddaa Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sat, 12 Sep 2009 12:00:17 +0100
Subject: [ARM] Update mach-types

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/tools/mach-types | 68 ++++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 64 insertions(+), 4 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 200d83a9828..c8c55b46934 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Sat Aug 1 16:26:02 2009
+# Last update: Sat Sep 12 12:00:16 2009
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -1962,7 +1962,7 @@ ethernut5		MACH_ETHERNUT5		ETHERNUT5		1971
 arm11			MACH_ARM11		ARM11			1972
 cpuat9260		MACH_CPUAT9260		CPUAT9260		1973
 cpupxa255		MACH_CPUPXA255		CPUPXA255		1974
-cpuimx27		MACH_CPUIMX27		CPUIMX27		1975
+eukrea_cpuimx27		MACH_CPUIMX27		CPUIMX27		1975
 cheflux			MACH_CHEFLUX		CHEFLUX			1976
 eb_cpux9k2		MACH_EB_CPUX9K2		EB_CPUX9K2		1977
 opcotec			MACH_OPCOTEC		OPCOTEC			1978
@@ -2249,14 +2249,14 @@ omap3_phrazer		MACH_OMAP3_PHRAZER	OMAP3_PHRAZER		2261
 darwin			MACH_DARWIN		DARWIN			2262
 oratiscomu		MACH_ORATISCOMU		ORATISCOMU		2263
 rtsbc20			MACH_RTSBC20		RTSBC20			2264
-i780			MACH_I780		I780			2265
+sgh_i780		MACH_I780		I780			2265
 gemini324		MACH_GEMINI324		GEMINI324		2266
 oratislan		MACH_ORATISLAN		ORATISLAN		2267
 oratisalog		MACH_ORATISALOG		ORATISALOG		2268
 oratismadi		MACH_ORATISMADI		ORATISMADI		2269
 oratisot16		MACH_ORATISOT16		ORATISOT16		2270
 oratisdesk		MACH_ORATISDESK		ORATISDESK		2271
-v2p_ca9			MACH_V2P_CA9		V2P_CA9			2272
+v2_ca9			MACH_V2P_CA9		V2P_CA9			2272
 sintexo			MACH_SINTEXO		SINTEXO			2273
 cm3389			MACH_CM3389		CM3389			2274
 omap3_cio		MACH_OMAP3_CIO		OMAP3_CIO		2275
@@ -2349,3 +2349,63 @@ openrd_client		MACH_OPENRD_CLIENT	OPENRD_CLIENT		2361
 hpipaq11x		MACH_HPIPAQ11X		HPIPAQ11X		2362
 wayland			MACH_WAYLAND		WAYLAND			2363
 acnbsx102		MACH_ACNBSX102		ACNBSX102		2364
+hwat91			MACH_HWAT91		HWAT91			2365
+at91sam9263cs		MACH_AT91SAM9263CS	AT91SAM9263CS		2366
+csb732			MACH_CSB732		CSB732			2367
+u8500			MACH_U8500		U8500			2368
+huqiu			MACH_HUQIU		HUQIU			2369
+mx51_kunlun		MACH_MX51_KUNLUN	MX51_KUNLUN		2370
+pmt1g			MACH_PMT1G		PMT1G			2371
+htcelf			MACH_HTCELF		HTCELF			2372
+armadillo420		MACH_ARMADILLO420	ARMADILLO420		2373
+armadillo440		MACH_ARMADILLO440	ARMADILLO440		2374
+u_chip_dual_arm		MACH_U_CHIP_DUAL_ARM	U_CHIP_DUAL_ARM		2375
+csr_bdb3		MACH_CSR_BDB3		CSR_BDB3		2376
+dolby_cat1018		MACH_DOLBY_CAT1018	DOLBY_CAT1018		2377
+hy9307			MACH_HY9307		HY9307			2378
+aspire_easystore	MACH_A_ES		A_ES			2379
+davinci_irif		MACH_DAVINCI_IRIF	DAVINCI_IRIF		2380
+agama9263		MACH_AGAMA9263		AGAMA9263		2381
+marvell_jasper		MACH_MARVELL_JASPER	MARVELL_JASPER		2382
+flint			MACH_FLINT		FLINT			2383
+tavorevb3		MACH_TAVOREVB3		TAVOREVB3		2384
+sch_m490		MACH_SCH_M490		SCH_M490		2386
+rbl01			MACH_RBL01		RBL01			2387
+omnifi			MACH_OMNIFI		OMNIFI			2388
+otavalo			MACH_OTAVALO		OTAVALO			2389
+sienna			MACH_SIENNA		SIENNA			2390
+htc_excalibur_s620	MACH_HTC_EXCALIBUR_S620	HTC_EXCALIBUR_S620	2391
+htc_opal		MACH_HTC_OPAL		HTC_OPAL		2392
+touchbook		MACH_TOUCHBOOK		TOUCHBOOK		2393
+latte			MACH_LATTE		LATTE			2394
+xa200			MACH_XA200		XA200			2395
+nimrod			MACH_NIMROD		NIMROD			2396
+cc9p9215_3g		MACH_CC9P9215_3G	CC9P9215_3G		2397
+cc9p9215_3gjs		MACH_CC9P9215_3GJS	CC9P9215_3GJS		2398
+tk71			MACH_TK71		TK71			2399
+comham3525		MACH_COMHAM3525		COMHAM3525		2400
+mx31erebus		MACH_MX31EREBUS		MX31EREBUS		2401
+mcardmx27		MACH_MCARDMX27		MCARDMX27		2402
+paradise		MACH_PARADISE		PARADISE		2403
+tide			MACH_TIDE		TIDE			2404
+wzl2440			MACH_WZL2440		WZL2440			2405
+sdrdemo			MACH_SDRDEMO		SDRDEMO			2406
+ethercan2		MACH_ETHERCAN2		ETHERCAN2		2407
+ecmimg20		MACH_ECMIMG20		ECMIMG20		2408
+omap_dragon		MACH_OMAP_DRAGON	OMAP_DRAGON		2409
+halo			MACH_HALO		HALO			2410
+huangshan		MACH_HUANGSHAN		HUANGSHAN		2411
+vl_ma2sc		MACH_VL_MA2SC		VL_MA2SC		2412
+raumfeld_rc		MACH_RAUMFELD_RC	RAUMFELD_RC		2413
+raumfeld_connector	MACH_RAUMFELD_CONNECTOR	RAUMFELD_CONNECTOR	2414
+raumfeld_speaker	MACH_RAUMFELD_SPEAKER	RAUMFELD_SPEAKER	2415
+multibus_master		MACH_MULTIBUS_MASTER	MULTIBUS_MASTER		2416
+multibus_pbk		MACH_MULTIBUS_PBK	MULTIBUS_PBK		2417
+tnetv107x		MACH_TNETV107X		TNETV107X		2418
+snake			MACH_SNAKE		SNAKE			2419
+cwmx27			MACH_CWMX27		CWMX27			2420
+sch_m480		MACH_SCH_M480		SCH_M480		2421
+platypus		MACH_PLATYPUS		PLATYPUS		2422
+pss2			MACH_PSS2		PSS2			2423
+davinci_apm150		MACH_DAVINCI_APM150	DAVINCI_APM150		2424
+str9100			MACH_STR9100		STR9100			2425
-- 
cgit v1.2.3


From 2f82af08fcc7dc01a7e98a49a5995a77e32a2925 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@fluxnic.net>
Date: Mon, 14 Sep 2009 03:25:28 -0400
Subject: Nicolas Pitre has a new email address

Due to problems at cam.org, my nico@cam.org email address is no longer
valid.  FRom now on, nico@fluxnic.net should be used instead.

Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/boot/compressed/head-sa1100.S         | 2 +-
 arch/arm/lib/lib1funcs.S                       | 2 +-
 arch/arm/lib/sha1.S                            | 2 +-
 arch/arm/mach-sa1100/include/mach/assabet.h    | 2 +-
 arch/arm/mach-sa1100/include/mach/hardware.h   | 2 +-
 arch/arm/mach-sa1100/include/mach/memory.h     | 2 +-
 arch/arm/mach-sa1100/include/mach/neponset.h   | 2 +-
 arch/arm/mach-sa1100/include/mach/system.h     | 2 +-
 arch/arm/mach-sa1100/include/mach/uncompress.h | 2 +-
 arch/arm/mach-sa1100/pm.c                      | 2 +-
 arch/arm/mach-sa1100/time.c                    | 2 +-
 arch/arm/mm/proc-xscale.S                      | 2 +-
 arch/arm/plat-iop/setup.c                      | 2 +-
 arch/arm/plat-omap/include/mach/system.h       | 2 +-
 14 files changed, 14 insertions(+), 14 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/boot/compressed/head-sa1100.S b/arch/arm/boot/compressed/head-sa1100.S
index 4c8c0e46027..6179d94dd5c 100644
--- a/arch/arm/boot/compressed/head-sa1100.S
+++ b/arch/arm/boot/compressed/head-sa1100.S
@@ -1,7 +1,7 @@
 /* 
  * linux/arch/arm/boot/compressed/head-sa1100.S
  * 
- * Copyright (C) 1999 Nicolas Pitre <nico@cam.org>
+ * Copyright (C) 1999 Nicolas Pitre <nico@fluxnic.net>
  * 
  * SA1100 specific tweaks.  This is merged into head.S by the linker.
  *
diff --git a/arch/arm/lib/lib1funcs.S b/arch/arm/lib/lib1funcs.S
index 67964bcfc85..6dc06487f3c 100644
--- a/arch/arm/lib/lib1funcs.S
+++ b/arch/arm/lib/lib1funcs.S
@@ -1,7 +1,7 @@
 /*
  * linux/arch/arm/lib/lib1funcs.S: Optimized ARM division routines
  *
- * Author: Nicolas Pitre <nico@cam.org>
+ * Author: Nicolas Pitre <nico@fluxnic.net>
  *   - contributed to gcc-3.4 on Sep 30, 2003
  *   - adapted for the Linux kernel on Oct 2, 2003
  */
diff --git a/arch/arm/lib/sha1.S b/arch/arm/lib/sha1.S
index 09b548cac1a..eb0edb80d7b 100644
--- a/arch/arm/lib/sha1.S
+++ b/arch/arm/lib/sha1.S
@@ -3,7 +3,7 @@
  *
  *  SHA transform optimized for ARM
  *
- *  Copyright:	(C) 2005 by Nicolas Pitre <nico@cam.org>
+ *  Copyright:	(C) 2005 by Nicolas Pitre <nico@fluxnic.net>
  *  Created:	September 17, 2005
  *
  *  This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/mach-sa1100/include/mach/assabet.h b/arch/arm/mach-sa1100/include/mach/assabet.h
index 3959b20d5d1..28c2cf50c25 100644
--- a/arch/arm/mach-sa1100/include/mach/assabet.h
+++ b/arch/arm/mach-sa1100/include/mach/assabet.h
@@ -1,7 +1,7 @@
 /*
  * arch/arm/mach-sa1100/include/mach/assabet.h
  *
- * Created 2000/06/05 by Nicolas Pitre <nico@cam.org>
+ * Created 2000/06/05 by Nicolas Pitre <nico@fluxnic.net>
  *
  * This file contains the hardware specific definitions for Assabet
  * Only include this file from SA1100-specific files.
diff --git a/arch/arm/mach-sa1100/include/mach/hardware.h b/arch/arm/mach-sa1100/include/mach/hardware.h
index 60711822b12..99f5856d8de 100644
--- a/arch/arm/mach-sa1100/include/mach/hardware.h
+++ b/arch/arm/mach-sa1100/include/mach/hardware.h
@@ -1,7 +1,7 @@
 /*
  * arch/arm/mach-sa1100/include/mach/hardware.h
  *
- * Copyright (C) 1998 Nicolas Pitre <nico@cam.org>
+ * Copyright (C) 1998 Nicolas Pitre <nico@fluxnic.net>
  *
  * This file contains the hardware definitions for SA1100 architecture
  *
diff --git a/arch/arm/mach-sa1100/include/mach/memory.h b/arch/arm/mach-sa1100/include/mach/memory.h
index e9f8eed900f..d5277f9bee7 100644
--- a/arch/arm/mach-sa1100/include/mach/memory.h
+++ b/arch/arm/mach-sa1100/include/mach/memory.h
@@ -1,7 +1,7 @@
 /*
  * arch/arm/mach-sa1100/include/mach/memory.h
  *
- * Copyright (C) 1999-2000 Nicolas Pitre <nico@cam.org>
+ * Copyright (C) 1999-2000 Nicolas Pitre <nico@fluxnic.net>
  */
 
 #ifndef __ASM_ARCH_MEMORY_H
diff --git a/arch/arm/mach-sa1100/include/mach/neponset.h b/arch/arm/mach-sa1100/include/mach/neponset.h
index d3f044f92c0..ffe2bc45eed 100644
--- a/arch/arm/mach-sa1100/include/mach/neponset.h
+++ b/arch/arm/mach-sa1100/include/mach/neponset.h
@@ -1,7 +1,7 @@
 /*
  * arch/arm/mach-sa1100/include/mach/neponset.h
  *
- * Created 2000/06/05 by Nicolas Pitre <nico@cam.org>
+ * Created 2000/06/05 by Nicolas Pitre <nico@fluxnic.net>
  *
  * This file contains the hardware specific definitions for Assabet
  * Only include this file from SA1100-specific files.
diff --git a/arch/arm/mach-sa1100/include/mach/system.h b/arch/arm/mach-sa1100/include/mach/system.h
index 942b153e251..ba9da9f7f18 100644
--- a/arch/arm/mach-sa1100/include/mach/system.h
+++ b/arch/arm/mach-sa1100/include/mach/system.h
@@ -1,7 +1,7 @@
 /*
  * arch/arm/mach-sa1100/include/mach/system.h
  *
- * Copyright (c) 1999 Nicolas Pitre <nico@cam.org>
+ * Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net>
  */
 #include <mach/hardware.h>
 
diff --git a/arch/arm/mach-sa1100/include/mach/uncompress.h b/arch/arm/mach-sa1100/include/mach/uncompress.h
index 714160b03d7..6cb39ddde65 100644
--- a/arch/arm/mach-sa1100/include/mach/uncompress.h
+++ b/arch/arm/mach-sa1100/include/mach/uncompress.h
@@ -1,7 +1,7 @@
 /*
  * arch/arm/mach-sa1100/include/mach/uncompress.h
  *
- * (C) 1999 Nicolas Pitre <nico@cam.org>
+ * (C) 1999 Nicolas Pitre <nico@fluxnic.net>
  *
  * Reorganised to be machine independent.
  */
diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c
index 111cce67ad2..c83fdc80edf 100644
--- a/arch/arm/mach-sa1100/pm.c
+++ b/arch/arm/mach-sa1100/pm.c
@@ -15,7 +15,7 @@
  * 			Save more value for the resume function! Support
  * 			Bitsy/Assabet/Freebird board
  *
- * 2001-08-29:	Nicolas Pitre <nico@cam.org>
+ * 2001-08-29:	Nicolas Pitre <nico@fluxnic.net>
  * 			Cleaned up, pushed platform dependent stuff
  * 			in the platform specific files.
  *
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index 711c0295c66..95d92e8e56a 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -4,7 +4,7 @@
  * Copyright (C) 1998 Deborah Wallach.
  * Twiddles  (C) 1999 Hugo Fiennes <hugo@empeg.com>
  *
- * 2000/03/29 (C) Nicolas Pitre <nico@cam.org>
+ * 2000/03/29 (C) Nicolas Pitre <nico@fluxnic.net>
  *	Rewritten: big cleanup, much simpler, better HZ accuracy.
  *
  */
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 0cce37b9393..423394260bc 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -17,7 +17,7 @@
  *
  * 2001 Sep 08:
  *	Completely revisited, many important fixes
- *	Nicolas Pitre <nico@cam.org>
+ *	Nicolas Pitre <nico@fluxnic.net>
  */
 
 #include <linux/linkage.h>
diff --git a/arch/arm/plat-iop/setup.c b/arch/arm/plat-iop/setup.c
index 9e573e78176..bade586fed0 100644
--- a/arch/arm/plat-iop/setup.c
+++ b/arch/arm/plat-iop/setup.c
@@ -1,7 +1,7 @@
 /*
  * arch/arm/plat-iop/setup.c
  *
- * Author: Nicolas Pitre <nico@cam.org>
+ * Author: Nicolas Pitre <nico@fluxnic.net>
  * Copyright (C) 2001 MontaVista Software, Inc.
  * Copyright (C) 2004 Intel Corporation.
  *
diff --git a/arch/arm/plat-omap/include/mach/system.h b/arch/arm/plat-omap/include/mach/system.h
index 1060e345423..ed8ec747726 100644
--- a/arch/arm/plat-omap/include/mach/system.h
+++ b/arch/arm/plat-omap/include/mach/system.h
@@ -1,6 +1,6 @@
 /*
  * Copied from arch/arm/mach-sa1100/include/mach/system.h
- * Copyright (c) 1999 Nicolas Pitre <nico@cam.org>
+ * Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net>
  */
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
-- 
cgit v1.2.3


From 59fcf48fdebe65e4774d2c7ec76b7845d281749a Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Mon, 14 Sep 2009 12:25:34 +0100
Subject: ARM: 5696/1: Include device.h in VIC driver

Currently build with the next head fails on archs using PL190
VIC because when we include amba/bus.h we need to include
device.h first.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/common/vic.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/arm')

diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index 920ced0b73c..f232941de8a 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -22,6 +22,7 @@
 #include <linux/list.h>
 #include <linux/io.h>
 #include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/amba/bus.h>
 
 #include <asm/mach/irq.h>
-- 
cgit v1.2.3


From 910a17e57ab6cd22b300bde4ce5f633f175c7ccd Mon Sep 17 00:00:00 2001
From: "Kirill A. Shutemov" <kirill@shutemov.name>
Date: Tue, 15 Sep 2009 10:23:53 +0100
Subject: ARM: 5700/1: ARM: Introduce ARM_L1_CACHE_SHIFT to define cache line
 size

Currently kernel believes that all ARM CPUs have L1_CACHE_SHIFT == 5.
It's not true at least for CPUs based on Cortex-A8.

List of CPUs with cache line size != 32 should be expanded later.

Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/cache.h | 2 +-
 arch/arm/mm/Kconfig          | 5 +++++
 2 files changed, 6 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/cache.h b/arch/arm/include/asm/cache.h
index feaa75f0013..66c160b8547 100644
--- a/arch/arm/include/asm/cache.h
+++ b/arch/arm/include/asm/cache.h
@@ -4,7 +4,7 @@
 #ifndef __ASMARM_CACHE_H
 #define __ASMARM_CACHE_H
 
-#define L1_CACHE_SHIFT		5
+#define L1_CACHE_SHIFT		CONFIG_ARM_L1_CACHE_SHIFT
 #define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
 
 /*
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 5fe595aeba6..8d43e58f924 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -771,3 +771,8 @@ config CACHE_XSC3L2
 	select OUTER_CACHE
 	help
 	  This option enables the L2 cache on XScale3.
+
+config ARM_L1_CACHE_SHIFT
+	int
+	default 6 if ARCH_OMAP3
+	default 5
-- 
cgit v1.2.3


From dca230f00d737353e2dffae489c916b41971921f Mon Sep 17 00:00:00 2001
From: "Kirill A. Shutemov" <kirill@shutemov.name>
Date: Tue, 15 Sep 2009 10:26:33 +0100
Subject: ARM: 5701/1: ARM: copy_page.S: take into account the size of the
 cache line

Optimized version of copy_page() was written with assumption that cache
line size is 32 bytes. On Cortex-A8 cache line size is 64 bytes.

This patch tries to generalize copy_page() to work with any cache line
size if cache line size is multiple of 16 and page size is multiple of
two cache line size.

After this optimization we've got ~25% speedup on OMAP3(tested in
userspace).

There is test for kernelspace which trigger copy-on-write after fork():

 #include <stdlib.h>
 #include <string.h>
 #include <unistd.h>

 #define BUF_SIZE (10000*4096)
 #define NFORK 200

 int main(int argc, char **argv)
 {
         char *buf = malloc(BUF_SIZE);
         int i;

         memset(buf, 0, BUF_SIZE);

         for(i = 0; i < NFORK; i++) {
                 if (fork()) {
                         wait(NULL);
                 } else {
                         int j;

                         for(j = 0; j < BUF_SIZE; j+= 4096)
                                 buf[j] = (j & 0xFF) + 1;
                         break;
                 }
         }

         free(buf);
         return 0;
 }

Before optimization this test takes ~66 seconds, after optimization
takes ~56 seconds.

Signed-off-by: Siarhei Siamashka <siarhei.siamashka@nokia.com>
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/lib/copy_page.S | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/lib/copy_page.S b/arch/arm/lib/copy_page.S
index 6ae04db1ca4..6ee2f6706f8 100644
--- a/arch/arm/lib/copy_page.S
+++ b/arch/arm/lib/copy_page.S
@@ -12,8 +12,9 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
+#include <asm/cache.h>
 
-#define COPY_COUNT (PAGE_SZ/64 PLD( -1 ))
+#define COPY_COUNT (PAGE_SZ / (2 * L1_CACHE_BYTES) PLD( -1 ))
 
 		.text
 		.align	5
@@ -26,17 +27,16 @@
 ENTRY(copy_page)
 		stmfd	sp!, {r4, lr}			@	2
 	PLD(	pld	[r1, #0]		)
-	PLD(	pld	[r1, #32]		)
+	PLD(	pld	[r1, #L1_CACHE_BYTES]		)
 		mov	r2, #COPY_COUNT			@	1
 		ldmia	r1!, {r3, r4, ip, lr}		@	4+1
-1:	PLD(	pld	[r1, #64]		)
-	PLD(	pld	[r1, #96]		)
-2:		stmia	r0!, {r3, r4, ip, lr}		@	4
-		ldmia	r1!, {r3, r4, ip, lr}		@	4+1
-		stmia	r0!, {r3, r4, ip, lr}		@	4
-		ldmia	r1!, {r3, r4, ip, lr}		@	4+1
+1:	PLD(	pld	[r1, #2 * L1_CACHE_BYTES])
+	PLD(	pld	[r1, #3 * L1_CACHE_BYTES])
+2:
+	.rept	(2 * L1_CACHE_BYTES / 16 - 1)
 		stmia	r0!, {r3, r4, ip, lr}		@	4
 		ldmia	r1!, {r3, r4, ip, lr}		@	4
+	.endr
 		subs	r2, r2, #1			@	1
 		stmia	r0!, {r3, r4, ip, lr}		@	4
 		ldmgtia	r1!, {r3, r4, ip, lr}		@	4
-- 
cgit v1.2.3


From bc581770cfdd8c17ea17d324dc05e2f9c599e7ca Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Tue, 15 Sep 2009 17:30:37 +0100
Subject: ARM: 5580/2: ARM TCM (Tightly-Coupled Memory) support v3

This adds the TCM interface to Linux, when active, it will
detect and report TCM memories and sizes early in boot if
present, introduce generic TCM memory handling, provide a
generic TCM memory pool and select TCM memory for the U300
platform.

See the Documentation/arm/tcm.txt for documentation.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig                         |   5 +
 arch/arm/include/asm/cputype.h           |   5 +
 arch/arm/include/asm/tcm.h               |  31 ++++
 arch/arm/kernel/Makefile                 |   1 +
 arch/arm/kernel/setup.c                  |   2 +
 arch/arm/kernel/tcm.c                    | 246 +++++++++++++++++++++++++++++++
 arch/arm/kernel/tcm.h                    |  17 +++
 arch/arm/kernel/vmlinux.lds.S            |  57 +++++++
 arch/arm/mach-u300/include/mach/memory.h |   8 +
 arch/arm/mm/init.c                       |   8 +
 10 files changed, 380 insertions(+)
 create mode 100644 arch/arm/include/asm/tcm.h
 create mode 100644 arch/arm/kernel/tcm.c
 create mode 100644 arch/arm/kernel/tcm.h

(limited to 'arch/arm')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index d778a699f57..1c4119c6004 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -46,6 +46,10 @@ config GENERIC_CLOCKEVENTS_BROADCAST
 	depends on GENERIC_CLOCKEVENTS
 	default y if SMP && !LOCAL_TIMERS
 
+config HAVE_TCM
+	bool
+	select GENERIC_ALLOCATOR
+
 config NO_IOPORT
 	bool
 
@@ -649,6 +653,7 @@ config ARCH_U300
 	bool "ST-Ericsson U300 Series"
 	depends on MMU
 	select CPU_ARM926T
+	select HAVE_TCM
 	select ARM_AMBA
 	select ARM_VIC
 	select GENERIC_TIME
diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
index b3e656c6fb7..54a1f1d76b1 100644
--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@@ -63,6 +63,11 @@ static inline unsigned int __attribute_const__ read_cpuid_cachetype(void)
 	return read_cpuid(CPUID_CACHETYPE);
 }
 
+static inline unsigned int __attribute_const__ read_cpuid_tcmstatus(void)
+{
+	return read_cpuid(CPUID_TCM);
+}
+
 /*
  * Intel's XScale3 core supports some v6 features (supersections, L2)
  * but advertises itself as v5 as it does not support the v6 ISA.  For
diff --git a/arch/arm/include/asm/tcm.h b/arch/arm/include/asm/tcm.h
new file mode 100644
index 00000000000..5929ef5d927
--- /dev/null
+++ b/arch/arm/include/asm/tcm.h
@@ -0,0 +1,31 @@
+/*
+ *
+ * Copyright (C) 2008-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Author: Rickard Andersson <rickard.andersson@stericsson.com>
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ *
+ */
+#ifndef __ASMARM_TCM_H
+#define __ASMARM_TCM_H
+
+#ifndef CONFIG_HAVE_TCM
+#error "You should not be including tcm.h unless you have a TCM!"
+#endif
+
+#include <linux/compiler.h>
+
+/* Tag variables with this */
+#define __tcmdata __section(.tcm.data)
+/* Tag constants with this */
+#define __tcmconst __section(.tcm.rodata)
+/* Tag functions inside TCM called from outside TCM with this */
+#define __tcmfunc __attribute__((long_call)) __section(.tcm.text) noinline
+/* Tag function inside TCM called from inside TCM  with this */
+#define __tcmlocalfunc __section(.tcm.text)
+
+void *tcm_alloc(size_t len);
+void tcm_free(void *addr, size_t len);
+
+#endif
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 3213c9382b1..6808e01aedc 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_OABI_COMPAT)	+= sys_oabi-compat.o
 obj-$(CONFIG_ARM_THUMBEE)	+= thumbee.o
 obj-$(CONFIG_KGDB)		+= kgdb.o
 obj-$(CONFIG_ARM_UNWIND)	+= unwind.o
+obj-$(CONFIG_HAVE_TCM)		+= tcm.o
 
 obj-$(CONFIG_CRUNCH)		+= crunch.o crunch-bits.o
 AFLAGS_crunch-bits.o		:= -Wa,-mcpu=ep9312
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index d4d4f77c91b..c6c57b640b6 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -45,6 +45,7 @@
 
 #include "compat.h"
 #include "atags.h"
+#include "tcm.h"
 
 #ifndef MEM_SIZE
 #define MEM_SIZE	(16*1024*1024)
@@ -749,6 +750,7 @@ void __init setup_arch(char **cmdline_p)
 #endif
 
 	cpu_init();
+	tcm_init();
 
 	/*
 	 * Set up various architecture-specific pointers
diff --git a/arch/arm/kernel/tcm.c b/arch/arm/kernel/tcm.c
new file mode 100644
index 00000000000..e50303868f1
--- /dev/null
+++ b/arch/arm/kernel/tcm.c
@@ -0,0 +1,246 @@
+/*
+ * Copyright (C) 2008-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * TCM memory handling for ARM systems
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Rickard Andersson <rickard.andersson@stericsson.com>
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/stddef.h>
+#include <linux/ioport.h>
+#include <linux/genalloc.h>
+#include <linux/string.h> /* memcpy */
+#include <asm/page.h> /* PAGE_SHIFT */
+#include <asm/cputype.h>
+#include <asm/mach/map.h>
+#include <mach/memory.h>
+#include "tcm.h"
+
+/* Scream and warn about misuse */
+#if !defined(ITCM_OFFSET) || !defined(ITCM_END) || \
+    !defined(DTCM_OFFSET) || !defined(DTCM_END)
+#error "TCM support selected but offsets not defined!"
+#endif
+
+static struct gen_pool *tcm_pool;
+
+/* TCM section definitions from the linker */
+extern char __itcm_start, __sitcm_text, __eitcm_text;
+extern char __dtcm_start, __sdtcm_data, __edtcm_data;
+
+/*
+ * TCM memory resources
+ */
+static struct resource dtcm_res = {
+	.name = "DTCM RAM",
+	.start = DTCM_OFFSET,
+	.end = DTCM_END,
+	.flags = IORESOURCE_MEM
+};
+
+static struct resource itcm_res = {
+	.name = "ITCM RAM",
+	.start = ITCM_OFFSET,
+	.end = ITCM_END,
+	.flags = IORESOURCE_MEM
+};
+
+static struct map_desc dtcm_iomap[] __initdata = {
+	{
+		.virtual	= DTCM_OFFSET,
+		.pfn		= __phys_to_pfn(DTCM_OFFSET),
+		.length		= (DTCM_END - DTCM_OFFSET + 1),
+		.type		= MT_UNCACHED
+	}
+};
+
+static struct map_desc itcm_iomap[] __initdata = {
+	{
+		.virtual	= ITCM_OFFSET,
+		.pfn		= __phys_to_pfn(ITCM_OFFSET),
+		.length		= (ITCM_END - ITCM_OFFSET + 1),
+		.type		= MT_UNCACHED
+	}
+};
+
+/*
+ * Allocate a chunk of TCM memory
+ */
+void *tcm_alloc(size_t len)
+{
+	unsigned long vaddr;
+
+	if (!tcm_pool)
+		return NULL;
+
+	vaddr = gen_pool_alloc(tcm_pool, len);
+	if (!vaddr)
+		return NULL;
+
+	return (void *) vaddr;
+}
+EXPORT_SYMBOL(tcm_alloc);
+
+/*
+ * Free a chunk of TCM memory
+ */
+void tcm_free(void *addr, size_t len)
+{
+	gen_pool_free(tcm_pool, (unsigned long) addr, len);
+}
+EXPORT_SYMBOL(tcm_free);
+
+
+static void __init setup_tcm_bank(u8 type, u32 offset, u32 expected_size)
+{
+	const int tcm_sizes[16] = { 0, -1, -1, 4, 8, 16, 32, 64, 128,
+				    256, 512, 1024, -1, -1, -1, -1 };
+	u32 tcm_region;
+	int tcm_size;
+
+	/* Read the special TCM region register c9, 0 */
+	if (!type)
+		asm("mrc	p15, 0, %0, c9, c1, 0"
+		    : "=r" (tcm_region));
+	else
+		asm("mrc	p15, 0, %0, c9, c1, 1"
+		    : "=r" (tcm_region));
+
+	tcm_size = tcm_sizes[(tcm_region >> 2) & 0x0f];
+	if (tcm_size < 0) {
+		pr_err("CPU: %sTCM of unknown size!\n",
+			type ? "I" : "D");
+	} else {
+		pr_info("CPU: found %sTCM %dk @ %08x, %senabled\n",
+			type ? "I" : "D",
+			tcm_size,
+			(tcm_region & 0xfffff000U),
+			(tcm_region & 1) ? "" : "not ");
+	}
+
+	if (tcm_size != expected_size) {
+		pr_crit("CPU: %sTCM was detected %dk but expected %dk!\n",
+		       type ? "I" : "D",
+		       tcm_size,
+		       expected_size);
+		/* Adjust to the expected size? what can we do... */
+	}
+
+	/* Force move the TCM bank to where we want it, enable */
+	tcm_region = offset | (tcm_region & 0x00000ffeU) | 1;
+
+	if (!type)
+		asm("mcr	p15, 0, %0, c9, c1, 0"
+		    : /* No output operands */
+		    : "r" (tcm_region));
+	else
+		asm("mcr	p15, 0, %0, c9, c1, 1"
+		    : /* No output operands */
+		    : "r" (tcm_region));
+
+	pr_debug("CPU: moved %sTCM %dk to %08x, enabled\n",
+		 type ? "I" : "D",
+		 tcm_size,
+		 (tcm_region & 0xfffff000U));
+}
+
+/*
+ * This initializes the TCM memory
+ */
+void __init tcm_init(void)
+{
+	u32 tcm_status = read_cpuid_tcmstatus();
+	char *start;
+	char *end;
+	char *ram;
+
+	/* Setup DTCM if present */
+	if (tcm_status & (1 << 16)) {
+		setup_tcm_bank(0, DTCM_OFFSET,
+			       (DTCM_END - DTCM_OFFSET + 1) >> 10);
+		request_resource(&iomem_resource, &dtcm_res);
+		iotable_init(dtcm_iomap, 1);
+		/* Copy data from RAM to DTCM */
+		start = &__sdtcm_data;
+		end   = &__edtcm_data;
+		ram   = &__dtcm_start;
+		memcpy(start, ram, (end-start));
+		pr_debug("CPU DTCM: copied data from %p - %p\n", start, end);
+	}
+
+	/* Setup ITCM if present */
+	if (tcm_status & 1) {
+		setup_tcm_bank(1, ITCM_OFFSET,
+			       (ITCM_END - ITCM_OFFSET + 1) >> 10);
+		request_resource(&iomem_resource, &itcm_res);
+		iotable_init(itcm_iomap, 1);
+		/* Copy code from RAM to ITCM */
+		start = &__sitcm_text;
+		end   = &__eitcm_text;
+		ram   = &__itcm_start;
+		memcpy(start, ram, (end-start));
+		pr_debug("CPU ITCM: copied code from %p - %p\n", start, end);
+	}
+}
+
+/*
+ * This creates the TCM memory pool and has to be done later,
+ * during the core_initicalls, since the allocator is not yet
+ * up and running when the first initialization runs.
+ */
+static int __init setup_tcm_pool(void)
+{
+	u32 tcm_status = read_cpuid_tcmstatus();
+	u32 dtcm_pool_start = (u32) &__edtcm_data;
+	u32 itcm_pool_start = (u32) &__eitcm_text;
+	int ret;
+
+	/*
+	 * Set up malloc pool, 2^2 = 4 bytes granularity since
+	 * the TCM is sometimes just 4 KiB. NB: pages and cache
+	 * line alignments does not matter in TCM!
+	 */
+	tcm_pool = gen_pool_create(2, -1);
+
+	pr_debug("Setting up TCM memory pool\n");
+
+	/* Add the rest of DTCM to the TCM pool */
+	if (tcm_status & (1 << 16)) {
+		if (dtcm_pool_start < DTCM_END) {
+			ret = gen_pool_add(tcm_pool, dtcm_pool_start,
+					   DTCM_END - dtcm_pool_start + 1, -1);
+			if (ret) {
+				pr_err("CPU DTCM: could not add DTCM " \
+				       "remainder to pool!\n");
+				return ret;
+			}
+			pr_debug("CPU DTCM: Added %08x bytes @ %08x to " \
+				 "the TCM memory pool\n",
+				 DTCM_END - dtcm_pool_start + 1,
+				 dtcm_pool_start);
+		}
+	}
+
+	/* Add the rest of ITCM to the TCM pool */
+	if (tcm_status & 1) {
+		if (itcm_pool_start < ITCM_END) {
+			ret = gen_pool_add(tcm_pool, itcm_pool_start,
+					   ITCM_END - itcm_pool_start + 1, -1);
+			if (ret) {
+				pr_err("CPU ITCM: could not add ITCM " \
+				       "remainder to pool!\n");
+				return ret;
+			}
+			pr_debug("CPU ITCM: Added %08x bytes @ %08x to " \
+				 "the TCM memory pool\n",
+				 ITCM_END - itcm_pool_start + 1,
+				 itcm_pool_start);
+		}
+	}
+	return 0;
+}
+
+core_initcall(setup_tcm_pool);
diff --git a/arch/arm/kernel/tcm.h b/arch/arm/kernel/tcm.h
new file mode 100644
index 00000000000..8015ad434a4
--- /dev/null
+++ b/arch/arm/kernel/tcm.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2008-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * TCM memory handling for ARM systems
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Rickard Andersson <rickard.andersson@stericsson.com>
+ */
+
+#ifdef CONFIG_HAVE_TCM
+void __init tcm_init(void);
+#else
+/* No TCM support, just blank inlines to be optimized out */
+inline void tcm_init(void)
+{
+}
+#endif
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 69371028a20..39d3ffb9ff2 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -198,6 +198,63 @@ SECTIONS
 	}
 	_edata_loc = __data_loc + SIZEOF(.data);
 
+#ifdef CONFIG_HAVE_TCM
+        /*
+	 * We align everything to a page boundary so we can
+	 * free it after init has commenced and TCM contents have
+	 * been copied to its destination.
+	 */
+	.tcm_start : {
+		. = ALIGN(PAGE_SIZE);
+		__tcm_start = .;
+		__itcm_start = .;
+	}
+
+	/*
+	 * Link these to the ITCM RAM
+	 * Put VMA to the TCM address and LMA to the common RAM
+	 * and we'll upload the contents from RAM to TCM and free
+	 * the used RAM after that.
+	 */
+	.text_itcm ITCM_OFFSET : AT(__itcm_start)
+	{
+		__sitcm_text = .;
+		*(.tcm.text)
+		*(.tcm.rodata)
+		. = ALIGN(4);
+		__eitcm_text = .;
+	}
+
+	/*
+	 * Reset the dot pointer, this is needed to create the
+	 * relative __dtcm_start below (to be used as extern in code).
+	 */
+	. = ADDR(.tcm_start) + SIZEOF(.tcm_start) + SIZEOF(.text_itcm);
+
+	.dtcm_start : {
+		__dtcm_start = .;
+	}
+
+	/* TODO: add remainder of ITCM as well, that can be used for data! */
+	.data_dtcm DTCM_OFFSET : AT(__dtcm_start)
+	{
+		. = ALIGN(4);
+		__sdtcm_data = .;
+		*(.tcm.data)
+		. = ALIGN(4);
+		__edtcm_data = .;
+	}
+
+	/* Reset the dot pointer or the linker gets confused */
+	. = ADDR(.dtcm_start) + SIZEOF(.data_dtcm);
+
+	/* End marker for freeing TCM copy in linked object */
+	.tcm_end : AT(ADDR(.dtcm_start) + SIZEOF(.data_dtcm)){
+		. = ALIGN(PAGE_SIZE);
+		__tcm_end = .;
+	}
+#endif
+
 	.bss : {
 		__bss_start = .;	/* BSS				*/
 		*(.bss)
diff --git a/arch/arm/mach-u300/include/mach/memory.h b/arch/arm/mach-u300/include/mach/memory.h
index bf134bcc129..ab000df7fc0 100644
--- a/arch/arm/mach-u300/include/mach/memory.h
+++ b/arch/arm/mach-u300/include/mach/memory.h
@@ -34,6 +34,14 @@
 	    (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024 + 0x100)
 #endif
 
+/*
+ * TCM memory whereabouts
+ */
+#define ITCM_OFFSET	0xffff2000
+#define ITCM_END	0xffff3fff
+#define DTCM_OFFSET	0xffff4000
+#define DTCM_END	0xffff5fff
+
 /*
  * We enable a real big DMA buffer if need be.
  */
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index ea36186f32c..764d5dc9af7 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -613,6 +613,14 @@ void __init mem_init(void)
 
 void free_initmem(void)
 {
+#ifdef CONFIG_HAVE_TCM
+	extern char *__tcm_start, *__tcm_end;
+
+	totalram_pages += free_area(__phys_to_pfn(__pa(__tcm_start)),
+				    __phys_to_pfn(__pa(__tcm_end)),
+				    "TCM link");
+#endif
+
 	if (!machine_is_integrator() && !machine_is_cintegrator())
 		totalram_pages += free_area(__phys_to_pfn(__pa(__init_begin)),
 					    __phys_to_pfn(__pa(__init_end)),
-- 
cgit v1.2.3


From 9e6c82cd3e1a739ef48bf8c1decc8e7a7d8de3ac Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Mon, 14 Sep 2009 12:57:11 +0100
Subject: ARM: 5698/1: MMCI pass capabilities in platform data

This makes it possible to pass down the host controller
capabilities for the MMCI driver using the platform data. It
also provides the capabilties for the U300 implementation as an
example, and makes sure the 4bit wide mode is set if this is
requested by the ios() now that we can actually set that
capability for a platform.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/mach/mmc.h | 1 +
 arch/arm/mach-u300/mmc.c        | 2 ++
 2 files changed, 3 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/mach/mmc.h b/arch/arm/include/asm/mach/mmc.h
index b490ecc79de..27bec555ee1 100644
--- a/arch/arm/include/asm/mach/mmc.h
+++ b/arch/arm/include/asm/mach/mmc.h
@@ -12,6 +12,7 @@ struct mmc_platform_data {
 	unsigned int (*status)(struct device *);
 	int	gpio_wp;
 	int	gpio_cd;
+	unsigned long capabilities;
 };
 
 #endif
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
index 585cc013639..089b9957b6a 100644
--- a/arch/arm/mach-u300/mmc.c
+++ b/arch/arm/mach-u300/mmc.c
@@ -158,6 +158,8 @@ int __devinit mmc_init(struct amba_device *adev)
 	mmci_card->mmc0_plat_data.status = mmc_status;
 	mmci_card->mmc0_plat_data.gpio_wp = -1;
 	mmci_card->mmc0_plat_data.gpio_cd = -1;
+	mmci_card->mmc0_plat_data.capabilities = MMC_CAP_MMC_HIGHSPEED |
+		MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA;
 
 	mmcsd_device->platform_data = (void *) &mmci_card->mmc0_plat_data;
 
-- 
cgit v1.2.3


From 9adb15b80bf1dc6b30a584e76efc876dfd029a13 Mon Sep 17 00:00:00 2001
From: Thomas Abraham <thomas.ab@samsung.com>
Date: Tue, 8 Sep 2009 14:26:00 +0900
Subject: ARM: S3C6410: use correct divider_shift in setrate_clksrc()

In s3c64xx_setrate_clksrc() we used sclk->shift, but actually need to
use sclk->divider_shift to correctly calculate the value for the divider
register.

Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
[ben-linux@fluff.org: Minor re-indentation of description]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c64xx/s3c6400-clock.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
index febac1950d8..c972d2f8c27 100644
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c
@@ -302,8 +302,8 @@ static int s3c64xx_setrate_clksrc(struct clk *clk, unsigned long rate)
 		return -EINVAL;
 
 	val = __raw_readl(reg);
-	val &= ~(0xf << sclk->shift);
-	val |= (div - 1) << sclk->shift;
+	val &= ~(0xf << sclk->divider_shift);
+	val |= (div - 1) << sclk->divider_shift;
 	__raw_writel(val, reg);
 
 	return 0;
-- 
cgit v1.2.3


From 6d025ac2fcf9d736ee399efddae74a3362dfa7da Mon Sep 17 00:00:00 2001
From: Thomas Abraham <thomas.ab@samsung.com>
Date: Tue, 8 Sep 2009 14:30:48 +0900
Subject: ARM: S3C6410: update clk->parent when setting clock source

This ensures the clock hierarchy data structures are updated when we
change the clock source in the actual hardware registers.

Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
[ben-linux@fluff.org: Minor re-indentation of subject]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c64xx/s3c6400-clock.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
index c972d2f8c27..54eef9326c2 100644
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c
@@ -328,6 +328,8 @@ static int s3c64xx_setparent_clksrc(struct clk *clk, struct clk *parent)
 		clksrc |= src_nr << sclk->shift;
 
 		__raw_writel(clksrc, S3C_CLK_SRC);
+
+		clk->parent = parent;
 		return 0;
 	}
 
-- 
cgit v1.2.3


From 5e49bc4d9e982bbfdaf7d6cf8bd96e43bd9f7db6 Mon Sep 17 00:00:00 2001
From: Thomas Abraham <thomas.ab@samsung.com>
Date: Tue, 8 Sep 2009 14:35:29 +0900
Subject: ARM: S3C64XX: Fix divider value calculation in
 s3c64xx_roundrate_clksrc

In s3c64xx_roundrate_clksrc function, the calculation is wrong. This
patch fixes this calculation.

Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c64xx/s3c6400-clock.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
index 54eef9326c2..9745852261e 100644
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c
@@ -345,7 +345,7 @@ static unsigned long s3c64xx_roundrate_clksrc(struct clk *clk,
 	if (rate > parent_rate)
 		rate = parent_rate;
 	else {
-		div = rate / parent_rate;
+		div = parent_rate / rate;
 
 		if (div == 0)
 			div = 1;
-- 
cgit v1.2.3


From 23c94b47be85207a8a9e0ac3ac89b16edf6356f0 Mon Sep 17 00:00:00 2001
From: Jassi <jassi.brar@samsung.com>
Date: Tue, 15 Sep 2009 19:01:18 +0900
Subject: ARM: S3C64XX: DMA: struct s3c64xx_dma_buff lli fix.

Correct the lli structure in struct s3c64xx_dma_buff which should
have been 'struct pl080s_lli' (samsung specific) instead of the generic
version 'struct pl080_lli'

Signed-Off-by: Jassi <jassi.brar@samsung.com>
[ben-linux@fluff.org: Edited description and subject fields]

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c64xx/include/plat/dma-plat.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c64xx/include/plat/dma-plat.h b/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
index 0c30dd98672..8f76a1e474d 100644
--- a/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
+++ b/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
@@ -26,7 +26,7 @@ struct s3c64xx_dma_buff {
 	struct s3c64xx_dma_buff *next;
 
 	void			*pw;
-	struct pl080_lli	*lli;
+	struct pl080s_lli	*lli;
 	dma_addr_t		 lli_dma;
 };
 
-- 
cgit v1.2.3


From 3ea61e49223c499c705b80ea385cb4df9c08da21 Mon Sep 17 00:00:00 2001
From: Jassi <jassi.brar@samsung.com>
Date: Tue, 15 Sep 2009 19:01:19 +0900
Subject: ARM: S3C64XX: DMA: 'size' argument of dma_pool_create

Provide actual minimum(struct pl080s_lli) size of block to
dma_pool_create call, instead of hardcoded 32 bytes.

Signed-Off-by: Jassi <jassi.brar@samsung.com>

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c64xx/dma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c
index 67aa93dbb69..b26d2a242d9 100644
--- a/arch/arm/plat-s3c64xx/dma.c
+++ b/arch/arm/plat-s3c64xx/dma.c
@@ -697,7 +697,7 @@ static int __init s3c64xx_dma_init(void)
 
 	printk(KERN_INFO "%s: Registering DMA channels\n", __func__);
 
-	dma_pool = dma_pool_create("DMA-LLI", NULL, 32, 16, 0);
+	dma_pool = dma_pool_create("DMA-LLI", NULL, sizeof(struct pl080s_lli), 16, 0);
 	if (!dma_pool) {
 		printk(KERN_ERR "%s: failed to create pool\n", __func__);
 		return -ENOMEM;
-- 
cgit v1.2.3


From b93011e72c1476b08ff62977ecf648080ba38c1a Mon Sep 17 00:00:00 2001
From: Jassi <jassi.brar@samsung.com>
Date: Tue, 15 Sep 2009 19:01:20 +0900
Subject: ARM: S3C64XX: DMA: Debugged alloc's with GFP_KERNEL flag in Intr
 context.

s3c2410_dma_enqueue makes call to kzalloc and dma_pool_alloc with GFP_KERNEL
flag set, this can be an issue for drivers, like I2S, which call
s3c2410_dma_enqueue from dma-bufferdone callback.

Change the flag GFP_KERNEL to GFP_ATOMIC to avoid any problems.

Signed-Off-by: Jassi <jassi.brar@samsung.com>
[ben-linux@fluff.org: Minor description edit and re-wrap]

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c64xx/dma.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c
index b26d2a242d9..266a10745a8 100644
--- a/arch/arm/plat-s3c64xx/dma.c
+++ b/arch/arm/plat-s3c64xx/dma.c
@@ -345,13 +345,13 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id,
 	if (!chan)
 		return -EINVAL;
 
-	buff = kzalloc(sizeof(struct s3c64xx_dma_buff), GFP_KERNEL);
+	buff = kzalloc(sizeof(struct s3c64xx_dma_buff), GFP_ATOMIC);
 	if (!buff) {
 		printk(KERN_ERR "%s: no memory for buffer\n", __func__);
 		return -ENOMEM;
 	}
 
-	lli = dma_pool_alloc(dma_pool, GFP_KERNEL, &buff->lli_dma);
+	lli = dma_pool_alloc(dma_pool, GFP_ATOMIC, &buff->lli_dma);
 	if (!lli) {
 		printk(KERN_ERR "%s: no memory for lli\n", __func__);
 		ret = -ENOMEM;
-- 
cgit v1.2.3


From ab8e8df87421574fe053bf1770353af5b24a2bbb Mon Sep 17 00:00:00 2001
From: Muralidharan Karicheri <m-karicheri2@ti.com>
Date: Wed, 16 Sep 2009 11:53:18 -0400
Subject: davinci: DM644x platform changes for vpfe capture

DM644x platform and board setup

This adds platform and board setup changes required to support
vpfe capture driver on DM644x

Tested video capture on DM6446 with tvp514x driver

Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Reviewed-by: David Brownell <david-b@pacbell.net>
Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com>
Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-dm644x-evm.c    | 74 +++++++++++++++++++++++++++--
 arch/arm/mach-davinci/dm644x.c              | 56 ++++++++++++++++++++++
 arch/arm/mach-davinci/include/mach/dm644x.h |  2 +
 3 files changed, 129 insertions(+), 3 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 31cf84fbb01..1213a0087ad 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -28,6 +28,9 @@
 #include <linux/io.h>
 #include <linux/phy.h>
 #include <linux/clk.h>
+#include <linux/videodev2.h>
+
+#include <media/tvp514x.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -194,6 +197,72 @@ static struct platform_device davinci_fb_device = {
 	.num_resources = 0,
 };
 
+static struct tvp514x_platform_data tvp5146_pdata = {
+	.clk_polarity = 0,
+	.hs_polarity = 1,
+	.vs_polarity = 1
+};
+
+#define TVP514X_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
+/* Inputs available at the TVP5146 */
+static struct v4l2_input tvp5146_inputs[] = {
+	{
+		.index = 0,
+		.name = "Composite",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.std = TVP514X_STD_ALL,
+	},
+	{
+		.index = 1,
+		.name = "S-Video",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.std = TVP514X_STD_ALL,
+	},
+};
+
+/*
+ * this is the route info for connecting each input to decoder
+ * ouput that goes to vpfe. There is a one to one correspondence
+ * with tvp5146_inputs
+ */
+static struct vpfe_route tvp5146_routes[] = {
+	{
+		.input = INPUT_CVBS_VI2B,
+		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+	},
+	{
+		.input = INPUT_SVIDEO_VI2C_VI1C,
+		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+	},
+};
+
+static struct vpfe_subdev_info vpfe_sub_devs[] = {
+	{
+		.name = "tvp5146",
+		.grp_id = 0,
+		.num_inputs = ARRAY_SIZE(tvp5146_inputs),
+		.inputs = tvp5146_inputs,
+		.routes = tvp5146_routes,
+		.can_route = 1,
+		.ccdc_if_params = {
+			.if_type = VPFE_BT656,
+			.hdpol = VPFE_PINPOL_POSITIVE,
+			.vdpol = VPFE_PINPOL_POSITIVE,
+		},
+		.board_info = {
+			I2C_BOARD_INFO("tvp5146", 0x5d),
+			.platform_data = &tvp5146_pdata,
+		},
+	},
+};
+
+static struct vpfe_config vpfe_cfg = {
+	.num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
+	.sub_devs = vpfe_sub_devs,
+	.card_name = "DM6446 EVM",
+	.ccdc = "DM6446 CCDC",
+};
+
 static struct platform_device rtc_dev = {
 	.name           = "rtc_davinci_evm",
 	.id             = -1,
@@ -562,9 +631,6 @@ static struct i2c_board_info __initdata i2c_info[] =  {
 	{
 		I2C_BOARD_INFO("tlv320aic33", 0x1b),
 	},
-	/* ALSO:
-	 * - tvp5146 video decoder (0x5d)
-	 */
 };
 
 /* The msp430 uses a slow bitbanged I2C implementation (ergo 20 KHz),
@@ -594,6 +660,8 @@ static struct davinci_uart_config uart_config __initdata = {
 static void __init
 davinci_evm_map_io(void)
 {
+	/* setup input configuration for VPFE input devices */
+	dm644x_set_vpfe_config(&vpfe_cfg);
 	dm644x_init();
 }
 
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index e554aa6c9a8..d6e0fa5a8d8 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -580,6 +580,59 @@ static struct platform_device dm644x_asp_device = {
 	.resource	= dm644x_asp_resources,
 };
 
+static struct resource dm644x_vpss_resources[] = {
+	{
+		/* VPSS Base address */
+		.name		= "vpss",
+		.start          = 0x01c73400,
+		.end            = 0x01c73400 + 0xff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device dm644x_vpss_device = {
+	.name			= "vpss",
+	.id			= -1,
+	.dev.platform_data	= "dm644x_vpss",
+	.num_resources		= ARRAY_SIZE(dm644x_vpss_resources),
+	.resource		= dm644x_vpss_resources,
+};
+
+static struct resource vpfe_resources[] = {
+	{
+		.start          = IRQ_VDINT0,
+		.end            = IRQ_VDINT0,
+		.flags          = IORESOURCE_IRQ,
+	},
+	{
+		.start          = IRQ_VDINT1,
+		.end            = IRQ_VDINT1,
+		.flags          = IORESOURCE_IRQ,
+	},
+	{
+		.start          = 0x01c70400,
+		.end            = 0x01c70400 + 0xff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
+static struct platform_device vpfe_capture_dev = {
+	.name		= CAPTURE_DRV_NAME,
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(vpfe_resources),
+	.resource	= vpfe_resources,
+	.dev = {
+		.dma_mask		= &vpfe_capture_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+void dm644x_set_vpfe_config(struct vpfe_config *cfg)
+{
+	vpfe_capture_dev.dev.platform_data = cfg;
+}
+
 /*----------------------------------------------------------------------*/
 
 static struct map_desc dm644x_io_desc[] = {
@@ -715,6 +768,9 @@ static int __init dm644x_init_devices(void)
 
 	platform_device_register(&dm644x_edma_device);
 	platform_device_register(&dm644x_emac_device);
+	platform_device_register(&dm644x_vpss_device);
+	platform_device_register(&vpfe_capture_dev);
+
 	return 0;
 }
 postcore_initcall(dm644x_init_devices);
diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h
index 8b157ceec0c..0efb73852c2 100644
--- a/arch/arm/mach-davinci/include/mach/dm644x.h
+++ b/arch/arm/mach-davinci/include/mach/dm644x.h
@@ -26,6 +26,7 @@
 #include <mach/hardware.h>
 #include <mach/emac.h>
 #include <mach/asp.h>
+#include <media/davinci/vpfe_capture.h>
 
 #define DM644X_EMAC_BASE		(0x01C80000)
 #define DM644X_EMAC_CNTRL_OFFSET	(0x0000)
@@ -36,5 +37,6 @@
 
 void __init dm644x_init(void);
 void __init dm644x_init_asp(struct snd_platform_data *pdata);
+void dm644x_set_vpfe_config(struct vpfe_config *cfg);
 
 #endif /* __ASM_ARCH_DM644X_H */
-- 
cgit v1.2.3


From 51e68e27d310034332b67a6762914af9589b3db5 Mon Sep 17 00:00:00 2001
From: Muralidharan Karicheri <m-karicheri2@ti.com>
Date: Wed, 16 Sep 2009 12:02:50 -0400
Subject: davinci: DM355 - platform changes for vpfe capture

DM355 platform and board setup

This has platform and board setup changes to support vpfe capture
driver for DM355 EVMs.

Tested video capture on DM355 using tvp514x

Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Reviewed-by: David Brownell <david-b@pacbell.net>
Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com>
Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-dm355-evm.c    | 76 +++++++++++++++++++++++++--
 arch/arm/mach-davinci/dm355.c              | 83 ++++++++++++++++++++++++++++++
 arch/arm/mach-davinci/include/mach/dm355.h |  2 +
 arch/arm/mach-davinci/include/mach/mux.h   |  9 ++++
 4 files changed, 167 insertions(+), 3 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 9f25fd8ca4a..77e80679882 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -20,6 +20,8 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/clk.h>
+#include <linux/videodev2.h>
+#include <media/tvp514x.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
 
@@ -136,11 +138,11 @@ static void dm355evm_mmcsd_gpios(unsigned gpio)
 }
 
 static struct i2c_board_info dm355evm_i2c_info[] = {
-	{ I2C_BOARD_INFO("dm355evm_msp", 0x25),
+	{	I2C_BOARD_INFO("dm355evm_msp", 0x25),
 		.platform_data = dm355evm_mmcsd_gpios,
-		/* plus irq */ },
+	},
+	/* { plus irq  }, */
 	{ I2C_BOARD_INFO("tlv320aic33", 0x1b), },
-	/* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */
 };
 
 static void __init evm_init_i2c(void)
@@ -179,6 +181,72 @@ static struct platform_device dm355evm_dm9000 = {
 	.num_resources	= ARRAY_SIZE(dm355evm_dm9000_rsrc),
 };
 
+static struct tvp514x_platform_data tvp5146_pdata = {
+	.clk_polarity = 0,
+	.hs_polarity = 1,
+	.vs_polarity = 1
+};
+
+#define TVP514X_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
+/* Inputs available at the TVP5146 */
+static struct v4l2_input tvp5146_inputs[] = {
+	{
+		.index = 0,
+		.name = "Composite",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.std = TVP514X_STD_ALL,
+	},
+	{
+		.index = 1,
+		.name = "S-Video",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.std = TVP514X_STD_ALL,
+	},
+};
+
+/*
+ * this is the route info for connecting each input to decoder
+ * ouput that goes to vpfe. There is a one to one correspondence
+ * with tvp5146_inputs
+ */
+static struct vpfe_route tvp5146_routes[] = {
+	{
+		.input = INPUT_CVBS_VI2B,
+		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+	},
+	{
+		.input = INPUT_SVIDEO_VI2C_VI1C,
+		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+	},
+};
+
+static struct vpfe_subdev_info vpfe_sub_devs[] = {
+	{
+		.name = "tvp5146",
+		.grp_id = 0,
+		.num_inputs = ARRAY_SIZE(tvp5146_inputs),
+		.inputs = tvp5146_inputs,
+		.routes = tvp5146_routes,
+		.can_route = 1,
+		.ccdc_if_params = {
+			.if_type = VPFE_BT656,
+			.hdpol = VPFE_PINPOL_POSITIVE,
+			.vdpol = VPFE_PINPOL_POSITIVE,
+		},
+		.board_info = {
+			I2C_BOARD_INFO("tvp5146", 0x5d),
+			.platform_data = &tvp5146_pdata,
+		},
+	}
+};
+
+static struct vpfe_config vpfe_cfg = {
+	.num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
+	.sub_devs = vpfe_sub_devs,
+	.card_name = "DM355 EVM",
+	.ccdc = "DM355 CCDC",
+};
+
 static struct platform_device *davinci_evm_devices[] __initdata = {
 	&dm355evm_dm9000,
 	&davinci_nand_device,
@@ -190,6 +258,8 @@ static struct davinci_uart_config uart_config __initdata = {
 
 static void __init dm355_evm_map_io(void)
 {
+	/* setup input configuration for VPFE input devices */
+	dm355_set_vpfe_config(&vpfe_cfg);
 	dm355_init();
 }
 
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 4f42169c029..059670018af 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -488,6 +488,14 @@ MUX_CFG(DM355,	VOUT_FIELD_G70,	1,   18,    3,	  0,	 false)
 MUX_CFG(DM355,	VOUT_HVSYNC,	1,   16,    1,	  0,	 false)
 MUX_CFG(DM355,	VOUT_COUTL_EN,	1,   0,     0xff, 0x55,  false)
 MUX_CFG(DM355,	VOUT_COUTH_EN,	1,   8,     0xff, 0x55,  false)
+
+MUX_CFG(DM355,	VIN_PCLK,	0,   14,    1,    1,	 false)
+MUX_CFG(DM355,	VIN_CAM_WEN,	0,   13,    1,    1,	 false)
+MUX_CFG(DM355,	VIN_CAM_VD,	0,   12,    1,    1,	 false)
+MUX_CFG(DM355,	VIN_CAM_HD,	0,   11,    1,    1,	 false)
+MUX_CFG(DM355,	VIN_YIN_EN,	0,   10,    1,    1,	 false)
+MUX_CFG(DM355,	VIN_CINL_EN,	0,   0,   0xff, 0x55,	 false)
+MUX_CFG(DM355,	VIN_CINH_EN,	0,   8,     3,    3,	 false)
 #endif
 };
 
@@ -659,6 +667,67 @@ static struct platform_device dm355_asp1_device = {
 	.resource	= dm355_asp1_resources,
 };
 
+static struct resource dm355_vpss_resources[] = {
+	{
+		/* VPSS BL Base address */
+		.name		= "vpss",
+		.start          = 0x01c70800,
+		.end            = 0x01c70800 + 0xff,
+		.flags          = IORESOURCE_MEM,
+	},
+	{
+		/* VPSS CLK Base address */
+		.name		= "vpss",
+		.start          = 0x01c70000,
+		.end            = 0x01c70000 + 0xf,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device dm355_vpss_device = {
+	.name			= "vpss",
+	.id			= -1,
+	.dev.platform_data	= "dm355_vpss",
+	.num_resources		= ARRAY_SIZE(dm355_vpss_resources),
+	.resource		= dm355_vpss_resources,
+};
+
+static struct resource vpfe_resources[] = {
+	{
+		.start          = IRQ_VDINT0,
+		.end            = IRQ_VDINT0,
+		.flags          = IORESOURCE_IRQ,
+	},
+	{
+		.start          = IRQ_VDINT1,
+		.end            = IRQ_VDINT1,
+		.flags          = IORESOURCE_IRQ,
+	},
+	/* CCDC Base address */
+	{
+		.flags          = IORESOURCE_MEM,
+		.start          = 0x01c70600,
+		.end            = 0x01c70600 + 0x1ff,
+	},
+};
+
+static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
+static struct platform_device vpfe_capture_dev = {
+	.name		= CAPTURE_DRV_NAME,
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(vpfe_resources),
+	.resource	= vpfe_resources,
+	.dev = {
+		.dma_mask		= &vpfe_capture_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+void dm355_set_vpfe_config(struct vpfe_config *cfg)
+{
+	vpfe_capture_dev.dev.platform_data = cfg;
+}
+
 /*----------------------------------------------------------------------*/
 
 static struct map_desc dm355_io_desc[] = {
@@ -792,6 +861,20 @@ static int __init dm355_init_devices(void)
 
 	davinci_cfg_reg(DM355_INT_EDMA_CC);
 	platform_device_register(&dm355_edma_device);
+	platform_device_register(&dm355_vpss_device);
+	/*
+	 * setup Mux configuration for vpfe input and register
+	 * vpfe capture platform device
+	 */
+	davinci_cfg_reg(DM355_VIN_PCLK);
+	davinci_cfg_reg(DM355_VIN_CAM_WEN);
+	davinci_cfg_reg(DM355_VIN_CAM_VD);
+	davinci_cfg_reg(DM355_VIN_CAM_HD);
+	davinci_cfg_reg(DM355_VIN_YIN_EN);
+	davinci_cfg_reg(DM355_VIN_CINL_EN);
+	davinci_cfg_reg(DM355_VIN_CINH_EN);
+	platform_device_register(&vpfe_capture_dev);
+
 	return 0;
 }
 postcore_initcall(dm355_init_devices);
diff --git a/arch/arm/mach-davinci/include/mach/dm355.h b/arch/arm/mach-davinci/include/mach/dm355.h
index 03faaef95a9..85536d8e833 100644
--- a/arch/arm/mach-davinci/include/mach/dm355.h
+++ b/arch/arm/mach-davinci/include/mach/dm355.h
@@ -13,6 +13,7 @@
 
 #include <mach/hardware.h>
 #include <mach/asp.h>
+#include <media/davinci/vpfe_capture.h>
 
 #define ASP1_TX_EVT_EN	1
 #define ASP1_RX_EVT_EN	2
@@ -23,5 +24,6 @@ void __init dm355_init(void);
 void dm355_init_spi0(unsigned chipselect_mask,
 		struct spi_board_info *info, unsigned len);
 void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata);
+void dm355_set_vpfe_config(struct vpfe_config *cfg);
 
 #endif /* __ASM_ARCH_DM355_H */
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index 773283281be..bb84893a4e8 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -161,6 +161,15 @@ enum davinci_dm355_index {
 	DM355_VOUT_HVSYNC,
 	DM355_VOUT_COUTL_EN,
 	DM355_VOUT_COUTH_EN,
+
+	/* Video In Pin Mux */
+	DM355_VIN_PCLK,
+	DM355_VIN_CAM_WEN,
+	DM355_VIN_CAM_VD,
+	DM355_VIN_CAM_HD,
+	DM355_VIN_YIN_EN,
+	DM355_VIN_CINL_EN,
+	DM355_VIN_CINH_EN,
 };
 
 enum davinci_dm365_index {
-- 
cgit v1.2.3


From 85609c1ccda64af7d7c277469183f20e4f3b69c3 Mon Sep 17 00:00:00 2001
From: Muralidharan Karicheri <m-karicheri2@ti.com>
Date: Wed, 16 Sep 2009 13:15:30 -0400
Subject: DaVinci: DM646x - platform changes for vpif capture and display
 drivers

VPIF display changes (Chaithrika)

Add platform device and resource structures. Also define a platform specific
clock setup function that can be accessed by the driver to configure the clock
and CPLD.

VPIF caputure changes (Murali)

1) Modify vpif_subdev_info to add board_info, routing information and
   vpif interface configuration. Remove addr since it is part of
   board_info

2) Add code to setup channel mode and input decoder path for vpif
   capture driver

Also incorporated comments against version v0 of the patch series and
added a spinlock to protect writes to common registers

Tested on DM6467 on channel 0 using TVP514x. Following bootargs used
for drivers:

   vpif_capture.ch0_bufsize=829440 vpif_display.ch2_bufsize=829440

Signed-off-by: Manjunath Hadli <mrh@ti.com>
Signed-off-by: Brijesh Jadav <brijesh.j@ti.com>
Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-dm646x-evm.c    | 319 +++++++++++++++++++++++++++-
 arch/arm/mach-davinci/dm646x.c              | 104 +++++++++
 arch/arm/mach-davinci/include/mach/dm646x.h |  59 +++++
 3 files changed, 481 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 20547049b48..24e0e13b149 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -34,6 +34,8 @@
 #include <linux/i2c/pcf857x.h>
 #include <linux/etherdevice.h>
 
+#include <media/tvp514x.h>
+
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -62,6 +64,30 @@
 #define DM646X_EVM_PHY_MASK		(0x2)
 #define DM646X_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
 
+#define VIDCLKCTL_OFFSET	(DAVINCI_SYSTEM_MODULE_BASE + 0x38)
+#define VSCLKDIS_OFFSET		(DAVINCI_SYSTEM_MODULE_BASE + 0x6c)
+#define VCH2CLK_MASK		(BIT_MASK(10) | BIT_MASK(9) | BIT_MASK(8))
+#define VCH2CLK_SYSCLK8		(BIT(9))
+#define VCH2CLK_AUXCLK		(BIT(9) | BIT(8))
+#define VCH3CLK_MASK		(BIT_MASK(14) | BIT_MASK(13) | BIT_MASK(12))
+#define VCH3CLK_SYSCLK8		(BIT(13))
+#define VCH3CLK_AUXCLK		(BIT(14) | BIT(13))
+
+#define VIDCH2CLK		(BIT(10))
+#define VIDCH3CLK		(BIT(11))
+#define VIDCH1CLK		(BIT(4))
+#define TVP7002_INPUT		(BIT(4))
+#define TVP5147_INPUT		(~BIT(4))
+#define VPIF_INPUT_ONE_CHANNEL	(BIT(5))
+#define VPIF_INPUT_TWO_CHANNEL	(~BIT(5))
+#define TVP5147_CH0		"tvp514x-0"
+#define TVP5147_CH1		"tvp514x-1"
+
+static void __iomem *vpif_vidclkctl_reg;
+static void __iomem *vpif_vsclkdis_reg;
+/* spin lock for updating above registers */
+static spinlock_t vpif_reg_lock;
+
 static struct davinci_uart_config uart_config __initdata = {
 	.enabled_uarts = (1 << 0),
 };
@@ -287,6 +313,40 @@ static struct snd_platform_data dm646x_evm_snd_data[] = {
 	},
 };
 
+static struct i2c_client *cpld_client;
+
+static int cpld_video_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	cpld_client = client;
+	return 0;
+}
+
+static int __devexit cpld_video_remove(struct i2c_client *client)
+{
+	cpld_client = NULL;
+	return 0;
+}
+
+static const struct i2c_device_id cpld_video_id[] = {
+	{ "cpld_video", 0 },
+	{ }
+};
+
+static struct i2c_driver cpld_video_driver = {
+	.driver = {
+		.name	= "cpld_video",
+	},
+	.probe		= cpld_video_probe,
+	.remove		= cpld_video_remove,
+	.id_table	= cpld_video_id,
+};
+
+static void evm_init_cpld(void)
+{
+	i2c_add_driver(&cpld_video_driver);
+}
+
 static struct i2c_board_info __initdata i2c_info[] =  {
 	{
 		I2C_BOARD_INFO("24c256", 0x50),
@@ -301,7 +361,10 @@ static struct i2c_board_info __initdata i2c_info[] =  {
 	},
 	{
 		I2C_BOARD_INFO("tlv320aic33", 0x18),
-	}
+	},
+	{
+		I2C_BOARD_INFO("cpld_video", 0x3b),
+	},
 };
 
 static struct davinci_i2c_platform_data i2c_pdata = {
@@ -309,11 +372,265 @@ static struct davinci_i2c_platform_data i2c_pdata = {
 	.bus_delay      = 0 /* usec */,
 };
 
+static int set_vpif_clock(int mux_mode, int hd)
+{
+	unsigned long flags;
+	unsigned int value;
+	int val = 0;
+	int err = 0;
+
+	if (!vpif_vidclkctl_reg || !vpif_vsclkdis_reg || !cpld_client)
+		return -ENXIO;
+
+	/* disable the clock */
+	spin_lock_irqsave(&vpif_reg_lock, flags);
+	value = __raw_readl(vpif_vsclkdis_reg);
+	value |= (VIDCH3CLK | VIDCH2CLK);
+	__raw_writel(value, vpif_vsclkdis_reg);
+	spin_unlock_irqrestore(&vpif_reg_lock, flags);
+
+	val = i2c_smbus_read_byte(cpld_client);
+	if (val < 0)
+		return val;
+
+	if (mux_mode == 1)
+		val &= ~0x40;
+	else
+		val |= 0x40;
+
+	err = i2c_smbus_write_byte(cpld_client, val);
+	if (err)
+		return err;
+
+	value = __raw_readl(vpif_vidclkctl_reg);
+	value &= ~(VCH2CLK_MASK);
+	value &= ~(VCH3CLK_MASK);
+
+	if (hd >= 1)
+		value |= (VCH2CLK_SYSCLK8 | VCH3CLK_SYSCLK8);
+	else
+		value |= (VCH2CLK_AUXCLK | VCH3CLK_AUXCLK);
+
+	__raw_writel(value, vpif_vidclkctl_reg);
+
+	spin_lock_irqsave(&vpif_reg_lock, flags);
+	value = __raw_readl(vpif_vsclkdis_reg);
+	/* enable the clock */
+	value &= ~(VIDCH3CLK | VIDCH2CLK);
+	__raw_writel(value, vpif_vsclkdis_reg);
+	spin_unlock_irqrestore(&vpif_reg_lock, flags);
+
+	return 0;
+}
+
+static struct vpif_subdev_info dm646x_vpif_subdev[] = {
+	{
+		.name	= "adv7343",
+		.board_info = {
+			I2C_BOARD_INFO("adv7343", 0x2a),
+		},
+	},
+	{
+		.name	= "ths7303",
+		.board_info = {
+			I2C_BOARD_INFO("ths7303", 0x2c),
+		},
+	},
+};
+
+static const char *output[] = {
+	"Composite",
+	"Component",
+	"S-Video",
+};
+
+static struct vpif_display_config dm646x_vpif_display_config = {
+	.set_clock	= set_vpif_clock,
+	.subdevinfo	= dm646x_vpif_subdev,
+	.subdev_count	= ARRAY_SIZE(dm646x_vpif_subdev),
+	.output		= output,
+	.output_count	= ARRAY_SIZE(output),
+	.card_name	= "DM646x EVM",
+};
+
+/**
+ * setup_vpif_input_path()
+ * @channel: channel id (0 - CH0, 1 - CH1)
+ * @sub_dev_name: ptr sub device name
+ *
+ * This will set vpif input to capture data from tvp514x or
+ * tvp7002.
+ */
+static int setup_vpif_input_path(int channel, const char *sub_dev_name)
+{
+	int err = 0;
+	int val;
+
+	/* for channel 1, we don't do anything */
+	if (channel != 0)
+		return 0;
+
+	if (!cpld_client)
+		return -ENXIO;
+
+	val = i2c_smbus_read_byte(cpld_client);
+	if (val < 0)
+		return val;
+
+	if (!strcmp(sub_dev_name, TVP5147_CH0) ||
+	    !strcmp(sub_dev_name, TVP5147_CH1))
+		val &= TVP5147_INPUT;
+	else
+		val |= TVP7002_INPUT;
+
+	err = i2c_smbus_write_byte(cpld_client, val);
+	if (err)
+		return err;
+	return 0;
+}
+
+/**
+ * setup_vpif_input_channel_mode()
+ * @mux_mode:  mux mode. 0 - 1 channel or (1) - 2 channel
+ *
+ * This will setup input mode to one channel (TVP7002) or 2 channel (TVP5147)
+ */
+static int setup_vpif_input_channel_mode(int mux_mode)
+{
+	unsigned long flags;
+	int err = 0;
+	int val;
+	u32 value;
+
+	if (!vpif_vsclkdis_reg || !cpld_client)
+		return -ENXIO;
+
+	val = i2c_smbus_read_byte(cpld_client);
+	if (val < 0)
+		return val;
+
+	spin_lock_irqsave(&vpif_reg_lock, flags);
+	value = __raw_readl(vpif_vsclkdis_reg);
+	if (mux_mode) {
+		val &= VPIF_INPUT_TWO_CHANNEL;
+		value |= VIDCH1CLK;
+	} else {
+		val |= VPIF_INPUT_ONE_CHANNEL;
+		value &= ~VIDCH1CLK;
+	}
+	__raw_writel(value, vpif_vsclkdis_reg);
+	spin_unlock_irqrestore(&vpif_reg_lock, flags);
+
+	err = i2c_smbus_write_byte(cpld_client, val);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static struct tvp514x_platform_data tvp5146_pdata = {
+	.clk_polarity = 0,
+	.hs_polarity = 1,
+	.vs_polarity = 1
+};
+
+#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
+
+static struct vpif_subdev_info vpif_capture_sdev_info[] = {
+	{
+		.name	= TVP5147_CH0,
+		.board_info = {
+			I2C_BOARD_INFO("tvp5146", 0x5d),
+			.platform_data = &tvp5146_pdata,
+		},
+		.input = INPUT_CVBS_VI2B,
+		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+		.can_route = 1,
+		.vpif_if = {
+			.if_type = VPIF_IF_BT656,
+			.hd_pol = 1,
+			.vd_pol = 1,
+			.fid_pol = 0,
+		},
+	},
+	{
+		.name	= TVP5147_CH1,
+		.board_info = {
+			I2C_BOARD_INFO("tvp5146", 0x5c),
+			.platform_data = &tvp5146_pdata,
+		},
+		.input = INPUT_SVIDEO_VI2C_VI1C,
+		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+		.can_route = 1,
+		.vpif_if = {
+			.if_type = VPIF_IF_BT656,
+			.hd_pol = 1,
+			.vd_pol = 1,
+			.fid_pol = 0,
+		},
+	},
+};
+
+static const struct vpif_input dm6467_ch0_inputs[] = {
+	{
+		.input = {
+			.index = 0,
+			.name = "Composite",
+			.type = V4L2_INPUT_TYPE_CAMERA,
+			.std = TVP514X_STD_ALL,
+		},
+		.subdev_name = TVP5147_CH0,
+	},
+};
+
+static const struct vpif_input dm6467_ch1_inputs[] = {
+       {
+		.input = {
+			.index = 0,
+			.name = "S-Video",
+			.type = V4L2_INPUT_TYPE_CAMERA,
+			.std = TVP514X_STD_ALL,
+		},
+		.subdev_name = TVP5147_CH1,
+	},
+};
+
+static struct vpif_capture_config dm646x_vpif_capture_cfg = {
+	.setup_input_path = setup_vpif_input_path,
+	.setup_input_channel_mode = setup_vpif_input_channel_mode,
+	.subdev_info = vpif_capture_sdev_info,
+	.subdev_count = ARRAY_SIZE(vpif_capture_sdev_info),
+	.chan_config[0] = {
+		.inputs = dm6467_ch0_inputs,
+		.input_count = ARRAY_SIZE(dm6467_ch0_inputs),
+	},
+	.chan_config[1] = {
+		.inputs = dm6467_ch1_inputs,
+		.input_count = ARRAY_SIZE(dm6467_ch1_inputs),
+	},
+};
+
+static void __init evm_init_video(void)
+{
+	vpif_vidclkctl_reg = ioremap(VIDCLKCTL_OFFSET, 4);
+	vpif_vsclkdis_reg = ioremap(VSCLKDIS_OFFSET, 4);
+	if (!vpif_vidclkctl_reg || !vpif_vsclkdis_reg) {
+		pr_err("Can't map VPIF VIDCLKCTL or VSCLKDIS registers\n");
+		return;
+	}
+	spin_lock_init(&vpif_reg_lock);
+
+	dm646x_setup_vpif(&dm646x_vpif_display_config,
+			  &dm646x_vpif_capture_cfg);
+}
+
 static void __init evm_init_i2c(void)
 {
 	davinci_init_i2c(&i2c_pdata);
 	i2c_add_driver(&dm6467evm_cpld_driver);
 	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
+	evm_init_cpld();
+	evm_init_video();
 }
 
 static void __init davinci_map_io(void)
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 8fa28039f27..0976049c7b3 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -32,6 +32,15 @@
 #include "clock.h"
 #include "mux.h"
 
+#define DAVINCI_VPIF_BASE       (0x01C12000)
+#define VDD3P3V_PWDN_OFFSET	(0x48)
+#define VSCLKDIS_OFFSET		(0x6C)
+
+#define VDD3P3V_VID_MASK	(BIT_MASK(3) | BIT_MASK(2) | BIT_MASK(1) |\
+					BIT_MASK(0))
+#define VSCLKDIS_MASK		(BIT_MASK(11) | BIT_MASK(10) | BIT_MASK(9) |\
+					BIT_MASK(8))
+
 /*
  * Device specific clocks
  */
@@ -686,6 +695,75 @@ static struct platform_device dm646x_dit_device = {
 	.id	= -1,
 };
 
+static u64 vpif_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource vpif_resource[] = {
+	{
+		.start	= DAVINCI_VPIF_BASE,
+		.end	= DAVINCI_VPIF_BASE + 0x03ff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device vpif_dev = {
+	.name		= "vpif",
+	.id		= -1,
+	.dev		= {
+			.dma_mask 		= &vpif_dma_mask,
+			.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= vpif_resource,
+	.num_resources	= ARRAY_SIZE(vpif_resource),
+};
+
+static struct resource vpif_display_resource[] = {
+	{
+		.start = IRQ_DM646X_VP_VERTINT2,
+		.end   = IRQ_DM646X_VP_VERTINT2,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_DM646X_VP_VERTINT3,
+		.end   = IRQ_DM646X_VP_VERTINT3,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device vpif_display_dev = {
+	.name		= "vpif_display",
+	.id		= -1,
+	.dev		= {
+			.dma_mask 		= &vpif_dma_mask,
+			.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= vpif_display_resource,
+	.num_resources	= ARRAY_SIZE(vpif_display_resource),
+};
+
+static struct resource vpif_capture_resource[] = {
+	{
+		.start = IRQ_DM646X_VP_VERTINT0,
+		.end   = IRQ_DM646X_VP_VERTINT0,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_DM646X_VP_VERTINT1,
+		.end   = IRQ_DM646X_VP_VERTINT1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device vpif_capture_dev = {
+	.name		= "vpif_capture",
+	.id		= -1,
+	.dev		= {
+			.dma_mask 		= &vpif_dma_mask,
+			.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= vpif_capture_resource,
+	.num_resources	= ARRAY_SIZE(vpif_capture_resource),
+};
+
 /*----------------------------------------------------------------------*/
 
 static struct map_desc dm646x_io_desc[] = {
@@ -814,6 +892,32 @@ void __init dm646x_init_mcasp1(struct snd_platform_data *pdata)
 	platform_device_register(&dm646x_dit_device);
 }
 
+void dm646x_setup_vpif(struct vpif_display_config *display_config,
+		       struct vpif_capture_config *capture_config)
+{
+	unsigned int value;
+	void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
+
+	value = __raw_readl(base + VSCLKDIS_OFFSET);
+	value &= ~VSCLKDIS_MASK;
+	__raw_writel(value, base + VSCLKDIS_OFFSET);
+
+	value = __raw_readl(base + VDD3P3V_PWDN_OFFSET);
+	value &= ~VDD3P3V_VID_MASK;
+	__raw_writel(value, base + VDD3P3V_PWDN_OFFSET);
+
+	davinci_cfg_reg(DM646X_STSOMUX_DISABLE);
+	davinci_cfg_reg(DM646X_STSIMUX_DISABLE);
+	davinci_cfg_reg(DM646X_PTSOMUX_DISABLE);
+	davinci_cfg_reg(DM646X_PTSIMUX_DISABLE);
+
+	vpif_display_dev.dev.platform_data = display_config;
+	vpif_capture_dev.dev.platform_data = capture_config;
+	platform_device_register(&vpif_dev);
+	platform_device_register(&vpif_display_dev);
+	platform_device_register(&vpif_capture_dev);
+}
+
 void __init dm646x_init(void)
 {
 	davinci_common_init(&davinci_soc_info_dm646x);
diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h
index feb1e02cdbd..8cec746ae9d 100644
--- a/arch/arm/mach-davinci/include/mach/dm646x.h
+++ b/arch/arm/mach-davinci/include/mach/dm646x.h
@@ -14,6 +14,8 @@
 #include <mach/hardware.h>
 #include <mach/emac.h>
 #include <mach/asp.h>
+#include <linux/i2c.h>
+#include <linux/videodev2.h>
 
 #define DM646X_EMAC_BASE		(0x01C80000)
 #define DM646X_EMAC_CNTRL_OFFSET	(0x0000)
@@ -29,4 +31,61 @@ void __init dm646x_init_ide(void);
 void __init dm646x_init_mcasp0(struct snd_platform_data *pdata);
 void __init dm646x_init_mcasp1(struct snd_platform_data *pdata);
 
+void dm646x_video_init(void);
+
+enum vpif_if_type {
+	VPIF_IF_BT656,
+	VPIF_IF_BT1120,
+	VPIF_IF_RAW_BAYER
+};
+
+struct vpif_interface {
+	enum vpif_if_type if_type;
+	unsigned hd_pol:1;
+	unsigned vd_pol:1;
+	unsigned fid_pol:1;
+};
+
+struct vpif_subdev_info {
+	const char *name;
+	struct i2c_board_info board_info;
+	u32 input;
+	u32 output;
+	unsigned can_route:1;
+	struct vpif_interface vpif_if;
+};
+
+struct vpif_display_config {
+	int (*set_clock)(int, int);
+	struct vpif_subdev_info *subdevinfo;
+	int subdev_count;
+	const char **output;
+	int output_count;
+	const char *card_name;
+};
+
+struct vpif_input {
+	struct v4l2_input input;
+	const char *subdev_name;
+};
+
+#define VPIF_CAPTURE_MAX_CHANNELS	2
+
+struct vpif_capture_chan_config {
+	const struct vpif_input *inputs;
+	int input_count;
+};
+
+struct vpif_capture_config {
+	int (*setup_input_channel_mode)(int);
+	int (*setup_input_path)(int, const char *);
+	struct vpif_capture_chan_config chan_config[VPIF_CAPTURE_MAX_CHANNELS];
+	struct vpif_subdev_info *subdev_info;
+	int subdev_count;
+	const char *card_name;
+};
+
+void dm646x_setup_vpif(struct vpif_display_config *,
+		       struct vpif_capture_config *);
+
 #endif /* __ASM_ARCH_DM646X_H */
-- 
cgit v1.2.3


From 9312fffbad5661a0ad52b5ca5a04875c763a35fa Mon Sep 17 00:00:00 2001
From: Amit Kucheria <amit.kucheria@verdurent.com>
Date: Thu, 27 Aug 2009 20:27:57 +0200
Subject: mfd: OMAP: Board-specifc twl4030 DPS scripts for RX51 board

Add support for Dynamic Power Switching (DPS) for the RX51 board.

These scripts are still a work-in-progress. I'll keep sending patches to
update the scripts as they are optimised.

Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
---
 arch/arm/mach-omap2/board-rx51-peripherals.c | 122 ++++++++++++++++++++++++++-
 1 file changed, 120 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 56d931a425f..e70baa79901 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-omap2/board-rx51-flash.c
+ * linux/arch/arm/mach-omap2/board-rx51-peripherals.c
  *
  * Copyright (C) 2008-2009 Nokia
  *
@@ -282,7 +282,124 @@ static struct twl4030_usb_data rx51_usb_data = {
 	.usb_mode		= T2_USB_MODE_ULPI,
 };
 
-static struct twl4030_platform_data rx51_twldata = {
+static struct twl4030_ins sleep_on_seq[] __initdata = {
+/*
+ * Turn off VDD1 and VDD2.
+ */
+	{MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_OFF), 4},
+	{MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_OFF), 2},
+/*
+ * And also turn off the OMAP3 PLLs and the sysclk output.
+ */
+	{MSG_SINGULAR(DEV_GRP_P1, 0x7, RES_STATE_OFF), 3},
+	{MSG_SINGULAR(DEV_GRP_P1, 0x17, RES_STATE_OFF), 3},
+};
+
+static struct twl4030_script sleep_on_script __initdata = {
+	.script = sleep_on_seq,
+	.size   = ARRAY_SIZE(sleep_on_seq),
+	.flags  = TWL4030_SLEEP_SCRIPT,
+};
+
+static struct twl4030_ins wakeup_seq[] __initdata = {
+/*
+ * Reenable the OMAP3 PLLs.
+ * Wakeup VDD1 and VDD2.
+ * Reenable sysclk output.
+ */
+	{MSG_SINGULAR(DEV_GRP_P1, 0x7, RES_STATE_ACTIVE), 0x30},
+	{MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_ACTIVE), 0x30},
+	{MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_ACTIVE), 0x37},
+	{MSG_SINGULAR(DEV_GRP_P1, 0x19, RES_STATE_ACTIVE), 3},
+};
+
+static struct twl4030_script wakeup_script __initdata = {
+	.script	= wakeup_seq,
+	.size	= ARRAY_SIZE(wakeup_seq),
+	.flags	= TWL4030_WAKEUP12_SCRIPT,
+};
+
+static struct twl4030_ins wakeup_p3_seq[] __initdata = {
+/*
+ * Wakeup VDD1 (dummy to be able to insert a delay)
+ * Enable CLKEN
+ */
+	{MSG_SINGULAR(DEV_GRP_P1, 0x17, RES_STATE_ACTIVE), 3},
+};
+
+static struct twl4030_script wakeup_p3_script __initdata = {
+	.script	= wakeup_p3_seq,
+	.size	= ARRAY_SIZE(wakeup_p3_seq),
+	.flags	= TWL4030_WAKEUP3_SCRIPT,
+};
+
+static struct twl4030_ins wrst_seq[] __initdata = {
+/*
+ * Reset twl4030.
+ * Reset VDD1 regulator.
+ * Reset VDD2 regulator.
+ * Reset VPLL1 regulator.
+ * Enable sysclk output.
+ * Reenable twl4030.
+ */
+	{MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_OFF), 2},
+	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 0, 1, RES_STATE_ACTIVE),
+		0x13},
+	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 2, RES_STATE_WRST), 0x13},
+	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 3, RES_STATE_OFF), 0x13},
+	{MSG_SINGULAR(DEV_GRP_NULL, RES_VDD1, RES_STATE_WRST), 0x13},
+	{MSG_SINGULAR(DEV_GRP_NULL, RES_VDD2, RES_STATE_WRST), 0x13},
+	{MSG_SINGULAR(DEV_GRP_NULL, RES_VPLL1, RES_STATE_WRST), 0x35},
+	{MSG_SINGULAR(DEV_GRP_P1, RES_HFCLKOUT, RES_STATE_ACTIVE), 2},
+	{MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_ACTIVE), 2},
+};
+
+static struct twl4030_script wrst_script __initdata = {
+	.script = wrst_seq,
+	.size   = ARRAY_SIZE(wrst_seq),
+	.flags  = TWL4030_WRST_SCRIPT,
+};
+
+static struct twl4030_script *twl4030_scripts[] __initdata = {
+	/* wakeup12 script should be loaded before sleep script, otherwise a
+	   board might hit retention before loading of wakeup script is
+	   completed. This can cause boot failures depending on timing issues.
+	*/
+	&wakeup_script,
+	&sleep_on_script,
+	&wakeup_p3_script,
+	&wrst_script,
+};
+
+static struct twl4030_resconfig twl4030_rconfig[] __initdata = {
+	{ .resource = RES_VINTANA1, .devgroup = -1, .type = -1, .type2 = 1 },
+	{ .resource = RES_VINTANA2, .devgroup = -1, .type = -1, .type2 = 1 },
+	{ .resource = RES_VINTDIG, .devgroup = -1, .type = -1, .type2 = 1 },
+	{ .resource = RES_VMMC1, .devgroup = -1, .type = -1, .type2 = 3},
+	{ .resource = RES_VMMC2, .devgroup = DEV_GRP_NULL, .type = -1,
+	  .type2 = 3},
+	{ .resource = RES_VAUX1, .devgroup = -1, .type = -1, .type2 = 3},
+	{ .resource = RES_VAUX2, .devgroup = -1, .type = -1, .type2 = 3},
+	{ .resource = RES_VAUX3, .devgroup = -1, .type = -1, .type2 = 3},
+	{ .resource = RES_VAUX4, .devgroup = -1, .type = -1, .type2 = 3},
+	{ .resource = RES_VPLL2, .devgroup = -1, .type = -1, .type2 = 3},
+	{ .resource = RES_VDAC, .devgroup = -1, .type = -1, .type2 = 3},
+	{ .resource = RES_VSIM, .devgroup = DEV_GRP_NULL, .type = -1,
+	  .type2 = 3},
+	{ .resource = RES_CLKEN, .devgroup = DEV_GRP_P3, .type = -1,
+		.type2 = 1 },
+	{ 0, 0},
+};
+
+static struct twl4030_power_data rx51_t2scripts_data __initdata = {
+	.scripts        = twl4030_scripts,
+	.num = ARRAY_SIZE(twl4030_scripts),
+	.resource_config = twl4030_rconfig,
+};
+
+
+
+static struct twl4030_platform_data rx51_twldata __initdata = {
 	.irq_base		= TWL4030_IRQ_BASE,
 	.irq_end		= TWL4030_IRQ_END,
 
@@ -291,6 +408,7 @@ static struct twl4030_platform_data rx51_twldata = {
 	.keypad			= &rx51_kp_data,
 	.madc			= &rx51_madc_data,
 	.usb			= &rx51_usb_data,
+	.power			= &rx51_t2scripts_data,
 
 	.vaux1			= &rx51_vaux1,
 	.vaux2			= &rx51_vaux2,
-- 
cgit v1.2.3


From ebdb5ab81c6b9fda130975d50fd6f43cb15c4ce6 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Mon, 6 Jul 2009 14:57:48 +0100
Subject: ARM: S3C64XX: Provide for board-specific IRQs

Set up some IRQ space to allocation to off-SoC interrupt controllers.
Default this to 16 IRQs. If individual boards require more than this
then they will need to modify this file so allocating a small number
helps reduce the number of modifications required.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c64xx/include/plat/irqs.h | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c64xx/include/plat/irqs.h b/arch/arm/plat-s3c64xx/include/plat/irqs.h
index 743a70094d0..7956fd3bb19 100644
--- a/arch/arm/plat-s3c64xx/include/plat/irqs.h
+++ b/arch/arm/plat-s3c64xx/include/plat/irqs.h
@@ -194,9 +194,17 @@
 
 #define IRQ_EINT_GROUP(group, no)	(IRQ_EINT_GROUP##group##_BASE + (no))
 
+/* Define a group of interrupts for board-specific use (eg, for MFD
+ * interrupt controllers). */
+#define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
+
+#define IRQ_BOARD_NR 16
+
+#define IRQ_BOARD_END (IRQ_BOARD_START + IRQ_BOARD_NR)
+
 /* Set the default NR_IRQS */
 
-#define NR_IRQS	(IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
+#define NR_IRQS	(IRQ_BOARD_END + 1)
 
 #endif /* __ASM_PLAT_S3C64XX_IRQS_H */
 
-- 
cgit v1.2.3


From d23b3517400e4638e76e8c8667c100721c6f03fe Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Thu, 17 Sep 2009 00:01:54 +0100
Subject: ARM: S3C: Add missing selection of S3C_DEV_NAND in machine Kconfigs.

A number of machines that need s3c_device_nand present do not select
this in their Kconfig entries. Add the necessary selection of the
configuration S3C_DEV_NAND so that we avoid the following error:

arch/arm/mach-s3c2410/built-in.o: In function `bast_map_io':
arch/arm/mach-s3c2410/mach-bast.c:634: undefined reference to `s3c_device_nand'
arch/arm/mach-s3c2412/built-in.o: In function `s3c2412_init_uarts':
arch/arm/mach-s3c2412/s3c2412.c:109: undefined reference to `s3c_device_nand'
arch/arm/mach-s3c2412/built-in.o: In function `jive_machine_init':
arch/arm/mach-s3c2412/mach-jive.c:673: undefined reference to `s3c_device_nand'

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/Kconfig | 5 +++++
 arch/arm/mach-s3c2412/Kconfig | 3 +++
 arch/arm/mach-s3c2440/Kconfig | 6 ++++++
 arch/arm/mach-s3c6400/Kconfig | 1 +
 arch/arm/mach-s3c6410/Kconfig | 1 +
 5 files changed, 16 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index d8c023d4df3..3d4e9da3fa5 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -77,6 +77,7 @@ config ARCH_H1940
 	select CPU_S3C2410
 	select PM_H1940 if PM
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
 	  Say Y here if you are using the HP IPAQ H1940
 
@@ -89,6 +90,7 @@ config MACH_N30
 	bool "Acer N30 family"
 	select CPU_S3C2410
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
 	  Say Y here if you want suppt for the Acer N30, Acer N35,
 	  Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
@@ -103,6 +105,7 @@ config ARCH_BAST
 	select S3C24XX_DCLK
 	select ISA
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
 	  Say Y here if you are using the Simtec Electronics EB2410ITX
 	  development board (also known as BAST)
@@ -111,6 +114,7 @@ config MACH_OTOM
  	bool "NexVision OTOM Board"
  	select CPU_S3C2410
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
  	  Say Y here if you are using the Nex Vision OTOM board
 
@@ -154,6 +158,7 @@ config MACH_QT2410
 	bool "QT2410"
 	select CPU_S3C2410
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
 	   Say Y here if you are using the Armzone QT2410
 
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index 35c1bde89cf..c2bdc4635d1 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -48,6 +48,7 @@ config MACH_JIVE
 	bool "Logitech Jive"
 	select CPU_S3C2412
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
 	  Say Y here if you are using the Logitech Jive.
 
@@ -61,6 +62,7 @@ config MACH_SMDK2413
 	select MACH_S3C2413
 	select MACH_SMDK
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
 	  Say Y here if you are using an SMDK2413
 
@@ -84,6 +86,7 @@ config MACH_VSTMS
 	bool "VMSTMS"
 	select CPU_S3C2412
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
 	  Say Y here if you are using an VSTMS board
 
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 8ae1b288f7f..d7bba919a77 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -48,6 +48,7 @@ config MACH_OSIRIS
 	select S3C2440_XTAL_12000000
 	select S3C2410_IOTIMING if S3C2440_CPUFREQ
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
 	  Say Y here if you are using the Simtec IM2440D20 module, also
 	  known as the Osiris.
@@ -57,6 +58,7 @@ config MACH_RX3715
 	select CPU_S3C2440
 	select S3C2440_XTAL_16934400
 	select PM_H1940 if PM
+	select S3C_DEV_NAND
 	help
 	  Say Y here if you are using the HP iPAQ rx3715.
 
@@ -66,6 +68,7 @@ config ARCH_S3C2440
 	select S3C2440_XTAL_16934400
 	select MACH_SMDK
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
 	  Say Y here if you are using the SMDK2440.
 
@@ -74,6 +77,7 @@ config MACH_NEXCODER_2440
  	select CPU_S3C2440
 	select S3C2440_XTAL_12000000
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
  	  Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
 
@@ -88,6 +92,7 @@ config MACH_AT2440EVB
 	bool "Avantech AT2440EVB development board"
 	select CPU_S3C2440
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
 	  Say Y here if you are using the AT2440EVB development board
 
@@ -97,6 +102,7 @@ config MACH_MINI2440
 	select EEPROM_AT24
 	select LEDS_TRIGGER_BACKLIGHT
 	select SND_S3C24XX_SOC_S3C24XX_UDA134X
+	select S3C_DEV_NAND
 	help
 	  Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
 	  available via various sources. It can come with a 3.5" or 7" touch LCD.
diff --git a/arch/arm/mach-s3c6400/Kconfig b/arch/arm/mach-s3c6400/Kconfig
index f5af212066c..770b72067e3 100644
--- a/arch/arm/mach-s3c6400/Kconfig
+++ b/arch/arm/mach-s3c6400/Kconfig
@@ -26,6 +26,7 @@ config MACH_SMDK6400
        bool "SMDK6400"
 	select CPU_S3C6400
 	select S3C_DEV_HSMMC
+	select S3C_DEV_NAND
 	select S3C6400_SETUP_SDHCI
 	help
 	  Machine support for the Samsung SMDK6400
diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig
index f9d0f09f976..53fc3ff657f 100644
--- a/arch/arm/mach-s3c6410/Kconfig
+++ b/arch/arm/mach-s3c6410/Kconfig
@@ -102,6 +102,7 @@ config MACH_HMT
 	bool "Airgoo HMT"
 	select CPU_S3C6410
 	select S3C_DEV_FB
+	select S3C_DEV_NAND
 	select S3C_DEV_USB_HOST
 	select S3C64XX_SETUP_FB_24BPP
 	select HAVE_PWM
-- 
cgit v1.2.3


From ba978365031dbe84ee8ba2d7977cb667f40caf04 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Fri, 18 Sep 2009 21:42:01 +0100
Subject: [ARM] Update mach-types

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/tools/mach-types | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index c8c55b46934..94be7bb6cb9 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Sat Sep 12 12:00:16 2009
+# Last update: Fri Sep 18 21:42:00 2009
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -1638,7 +1638,7 @@ mx35evb			MACH_MX35EVB		MX35EVB			1643
 aml_m8050		MACH_AML_M8050		AML_M8050		1644
 mx35_3ds		MACH_MX35_3DS		MX35_3DS		1645
 mars			MACH_MARS		MARS			1646
-ntosd_644xa		MACH_NTOSD_644XA	NTOSD_644XA		1647
+neuros_osd2		MACH_NEUROS_OSD2	NEUROS_OSD2		1647
 badger			MACH_BADGER		BADGER			1648
 trizeps4wl		MACH_TRIZEPS4WL		TRIZEPS4WL		1649
 trizeps5		MACH_TRIZEPS5		TRIZEPS5		1650
@@ -1654,7 +1654,7 @@ vf10xx			MACH_VF10XX		VF10XX			1659
 zoran43xx		MACH_ZORAN43XX		ZORAN43XX		1660
 sonix926		MACH_SONIX926		SONIX926		1661
 celestialsemi		MACH_CELESTIALSEMI	CELESTIALSEMI		1662
-cc9m2443		MACH_CC9M2443		CC9M2443		1663
+cc9m2443js		MACH_CC9M2443JS		CC9M2443JS		1663
 tw5334			MACH_TW5334		TW5334			1664
 omap_htcartemis		MACH_HTCARTEMIS		HTCARTEMIS		1665
 nal_hlite		MACH_NAL_HLITE		NAL_HLITE		1666
@@ -1802,7 +1802,7 @@ ccw9p9215js		MACH_CCW9P9215JS	CCW9P9215JS		1811
 rd88f5181l_ge		MACH_RD88F5181L_GE	RD88F5181L_GE		1812
 sifmain			MACH_SIFMAIN		SIFMAIN			1813
 sam9_l9261		MACH_SAM9_L9261		SAM9_L9261		1814
-cc9m2443js		MACH_CC9M2443JS		CC9M2443JS		1815
+cc9m2443		MACH_CC9M2443		CC9M2443		1815
 xaria300		MACH_XARIA300		XARIA300		1816
 it9200			MACH_IT9200		IT9200			1817
 rd88f5181l_fxo		MACH_RD88F5181L_FXO	RD88F5181L_FXO		1818
@@ -2409,3 +2409,15 @@ platypus		MACH_PLATYPUS		PLATYPUS		2422
 pss2			MACH_PSS2		PSS2			2423
 davinci_apm150		MACH_DAVINCI_APM150	DAVINCI_APM150		2424
 str9100			MACH_STR9100		STR9100			2425
+net5big			MACH_NET5BIG		NET5BIG			2426
+seabed9263		MACH_SEABED9263		SEABED9263		2427
+mx51_m2id		MACH_MX51_M2ID		MX51_M2ID		2428
+octvocplus_eb		MACH_OCTVOCPLUS_EB	OCTVOCPLUS_EB		2429
+klk_firefox		MACH_KLK_FIREFOX	KLK_FIREFOX		2430
+klk_wirma_module	MACH_KLK_WIRMA_MODULE	KLK_WIRMA_MODULE	2431
+klk_wirma_mmi		MACH_KLK_WIRMA_MMI	KLK_WIRMA_MMI		2432
+supersonic		MACH_SUPERSONIC		SUPERSONIC		2433
+liberty			MACH_LIBERTY		LIBERTY			2434
+mh355			MACH_MH355		MH355			2435
+pc7802			MACH_PC7802		PC7802			2436
+gnet_sgc		MACH_GNET_SGC		GNET_SGC		2437
-- 
cgit v1.2.3


From a2ca00ea9398265a26eabb358bba83c8b75c463d Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Thu, 17 Sep 2009 13:10:50 +0100
Subject: ARM: 5704/1: U300 sched_clock implementation v2

This adds the long debated sched_clock() override for the weak
in-kernel jiffybased sched_clock(). The implementation is more or
less identical to the one used in arch/arm/plat-omap/common.c
and at last attempt to merge this the merge was postponed at the
request of Peter Zijlstra due to pending discussions regarding
generalized clocksource-based sched_clock() implementations by
adding a flag to the clocksource. However that discussion ended
up with the generic code needing to be rewritten and Paul Mundt
see no reason not to proceed with this for the time being as it
can be easily converted once the generic code is in place.

Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-u300/timer.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
index cce53204880..26d26f5100f 100644
--- a/arch/arm/mach-u300/timer.c
+++ b/arch/arm/mach-u300/timer.c
@@ -346,6 +346,21 @@ static struct clocksource clocksource_u300_1mhz = {
 	.flags          = CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
+/*
+ * Override the global weak sched_clock symbol with this
+ * local implementation which uses the clocksource to get some
+ * better resolution when scheduling the kernel. We accept that
+ * this wraps around for now, since it is just a relative time
+ * stamp. (Inspired by OMAP implementation.)
+ */
+unsigned long long notrace sched_clock(void)
+{
+	return clocksource_cyc2ns(clocksource_u300_1mhz.read(
+				  &clocksource_u300_1mhz),
+				  clocksource_u300_1mhz.mult,
+				  clocksource_u300_1mhz.shift);
+}
+
 
 /*
  * This sets up the system timers, clock source and clock event.
-- 
cgit v1.2.3


From ee2b805c8eb6459cf541ef141ff70dae17af59ca Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Sat, 15 Aug 2009 15:12:05 +0100
Subject: ARM: 5678/1: SSP/SPI PL022 polarity terminology fix

The definition of the SPI clock phase for the Motorola mode of
the PL022 driver was incorrect: the spec had been interpreted as
data being recieved on rising or falling edge of the clocks while
the correct interpretation is that data can be recieved on the
first or second edge transition, falling or rising depending on
the polarity setting.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-u300/spi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-u300/spi.c b/arch/arm/mach-u300/spi.c
index 307d007ea7f..f0e887bea30 100644
--- a/arch/arm/mach-u300/spi.c
+++ b/arch/arm/mach-u300/spi.c
@@ -48,7 +48,7 @@ struct pl022_config_chip dummy_chip_info = {
 	.data_size = SSP_DATA_BITS_8, /* used to be 12 in some default */
 	.rx_lev_trig = SSP_RX_1_OR_MORE_ELEM,
 	.tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC,
-	.clk_phase = SSP_CLK_FALLING_EDGE,
+	.clk_phase = SSP_CLK_SECOND_EDGE,
 	.clk_pol = SSP_CLK_POL_IDLE_LOW,
 	.ctrl_len = SSP_BITS_12,
 	.wait_state = SSP_MWIRE_WAIT_ZERO,
-- 
cgit v1.2.3


From 200b812d0084f800bc52465e273b118ff5f8141f Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 18 Sep 2009 23:27:05 +0100
Subject: Clear the exclusive monitor when returning from an exception

The patch adds a CLREX or dummy STREX to the exception return path. This
is needed because several atomic/locking operations use a pair of
LDREX/STREXEQ and the EQ condition may not always be satisfied. This
would leave the exclusive monitor status set and may cause problems with
atomic/locking operations in the interrupted code.

With this patch, the atomic_set() operation can be a simple STR
instruction (on SMP systems, the global exclusive monitor is cleared by
STR anyway). Clearing the exclusive monitor during context switch is no
longer needed as this is handled by the exception return path anyway.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Jamie Lokier <jamie@shareable.org>
---
 arch/arm/include/asm/atomic.h  | 26 +++++++-------------------
 arch/arm/kernel/entry-armv.S   |  7 -------
 arch/arm/kernel/entry-header.S | 14 ++++++++++++++
 3 files changed, 21 insertions(+), 26 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h
index 9ed2377fe8e..d0daeab2234 100644
--- a/arch/arm/include/asm/atomic.h
+++ b/arch/arm/include/asm/atomic.h
@@ -19,31 +19,21 @@
 
 #ifdef __KERNEL__
 
+/*
+ * On ARM, ordinary assignment (str instruction) doesn't clear the local
+ * strex/ldrex monitor on some implementations. The reason we can use it for
+ * atomic_set() is the clrex or dummy strex done on every exception return.
+ */
 #define atomic_read(v)	((v)->counter)
+#define atomic_set(v,i)	(((v)->counter) = (i))
 
 #if __LINUX_ARM_ARCH__ >= 6
 
 /*
  * ARMv6 UP and SMP safe atomic ops.  We use load exclusive and
  * store exclusive to ensure that these are atomic.  We may loop
- * to ensure that the update happens.  Writing to 'v->counter'
- * without using the following operations WILL break the atomic
- * nature of these ops.
+ * to ensure that the update happens.
  */
-static inline void atomic_set(atomic_t *v, int i)
-{
-	unsigned long tmp;
-
-	__asm__ __volatile__("@ atomic_set\n"
-"1:	ldrex	%0, [%1]\n"
-"	strex	%0, %2, [%1]\n"
-"	teq	%0, #0\n"
-"	bne	1b"
-	: "=&r" (tmp)
-	: "r" (&v->counter), "r" (i)
-	: "cc");
-}
-
 static inline void atomic_add(int i, atomic_t *v)
 {
 	unsigned long tmp;
@@ -163,8 +153,6 @@ static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
 #error SMP not supported on pre-ARMv6 CPUs
 #endif
 
-#define atomic_set(v,i)	(((v)->counter) = (i))
-
 static inline int atomic_add_return(int i, atomic_t *v)
 {
 	unsigned long flags;
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 3d727a8a23b..a332bc7225b 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -734,13 +734,6 @@ ENTRY(__switch_to)
 #ifdef CONFIG_MMU
 	ldr	r6, [r2, #TI_CPU_DOMAIN]
 #endif
-#if __LINUX_ARM_ARCH__ >= 6
-#ifdef CONFIG_CPU_32v6K
-	clrex
-#else
-	strex	r5, r4, [ip]			@ Clear exclusive monitor
-#endif
-#endif
 #if defined(CONFIG_HAS_TLS_REG)
 	mcr	p15, 0, r3, c13, c0, 3		@ set TLS register
 #elif !defined(CONFIG_TLS_REG_EMUL)
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index a4eaf4f920c..e17e3c30d95 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -76,13 +76,25 @@
 #ifndef CONFIG_THUMB2_KERNEL
 	.macro	svc_exit, rpsr
 	msr	spsr_cxsf, \rpsr
+#if defined(CONFIG_CPU_32v6K)
+	clrex					@ clear the exclusive monitor
 	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+#elif defined (CONFIG_CPU_V6)
+	ldr	r0, [sp]
+	strex	r1, r2, [sp]			@ clear the exclusive monitor
+	ldmib	sp, {r1 - pc}^			@ load r1 - pc, cpsr
+#endif
 	.endm
 
 	.macro	restore_user_regs, fast = 0, offset = 0
 	ldr	r1, [sp, #\offset + S_PSR]	@ get calling cpsr
 	ldr	lr, [sp, #\offset + S_PC]!	@ get pc
 	msr	spsr_cxsf, r1			@ save in spsr_svc
+#if defined(CONFIG_CPU_32v6K)
+	clrex					@ clear the exclusive monitor
+#elif defined (CONFIG_CPU_V6)
+	strex	r1, r2, [sp]			@ clear the exclusive monitor
+#endif
 	.if	\fast
 	ldmdb	sp, {r1 - lr}^			@ get calling r1 - lr
 	.else
@@ -98,6 +110,7 @@
 	.endm
 #else	/* CONFIG_THUMB2_KERNEL */
 	.macro	svc_exit, rpsr
+	clrex					@ clear the exclusive monitor
 	ldr	r0, [sp, #S_SP]			@ top of the stack
 	ldr	r1, [sp, #S_PC]			@ return address
 	tst	r0, #4				@ orig stack 8-byte aligned?
@@ -110,6 +123,7 @@
 	.endm
 
 	.macro	restore_user_regs, fast = 0, offset = 0
+	clrex					@ clear the exclusive monitor
 	mov	r2, sp
 	load_user_sp_lr r2, r3, \offset + S_SP	@ calling sp, lr
 	ldr	r1, [sp, #\offset + S_PSR]	@ get calling cpsr
-- 
cgit v1.2.3


From 74109b8913277b1dbd072039d1e0a930d2834389 Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Fri, 18 Sep 2009 15:09:33 +0100
Subject: Fix "W" macro in arch/arm/include/asm/unified.h

Please, fold into 0becb088501886f37ade38762c8eaaf4263572cc
aka "Thumb-2: Add macros for the unified assembler syntax"

otherwise:

	crypto/cast6.c:372:39: error: macro "W" passed 2 arguments, but takes just 1

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/include/asm/unified.h | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/unified.h b/arch/arm/include/asm/unified.h
index 073e85b9b96..bc631161e9c 100644
--- a/arch/arm/include/asm/unified.h
+++ b/arch/arm/include/asm/unified.h
@@ -35,7 +35,9 @@
 
 #define ARM(x...)
 #define THUMB(x...)	x
+#ifdef __ASSEMBLY__
 #define W(instr)	instr.w
+#endif
 #define BSYM(sym)	sym + 1
 
 #else	/* !CONFIG_THUMB2_KERNEL */
@@ -45,7 +47,9 @@
 
 #define ARM(x...)	x
 #define THUMB(x...)
+#ifdef __ASSEMBLY__
 #define W(instr)	instr
+#endif
 #define BSYM(sym)	sym
 
 #endif	/* CONFIG_THUMB2_KERNEL */
-- 
cgit v1.2.3


From 83e686ea0291ee93b87dcdc00b96443b80de56c9 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 18 Sep 2009 23:27:07 +0100
Subject: Thumb-2: Correctly handle undefined instructions in the kernel

VFP instructions in the kernel may trigger undefined exceptions if VFP
hardware is not present. This patch corrects the loading of such Thumb-2
instructions. It also marks the "no_fp" label as a function so that the
linker generate a Thumb address.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/kernel/entry-armv.S | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index a332bc7225b..0a2ba51cf35 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -272,7 +272,15 @@ __und_svc:
 	@
 	@  r0 - instruction
 	@
+#ifndef	CONFIG_THUMB2_KERNEL
 	ldr	r0, [r2, #-4]
+#else
+	ldrh	r0, [r2, #-2]			@ Thumb instruction at LR - 2
+	and	r9, r0, #0xf800
+	cmp	r9, #0xe800			@ 32-bit instruction if xx >= 0
+	ldrhhs	r9, [r2]			@ bottom 16 bits
+	orrhs	r0, r9, r0, lsl #16
+#endif
 	adr	r9, BSYM(1f)
 	bl	call_fpe
 
@@ -678,7 +686,9 @@ ENTRY(fp_enter)
 	.word	no_fp
 	.previous
 
-no_fp:	mov	pc, lr
+ENTRY(no_fp)
+	mov	pc, lr
+ENDPROC(no_fp)
 
 __und_usr_unknown:
 	enable_irq
-- 
cgit v1.2.3


From 2cc0bab8616a3d0ae1bae11f5cf16a582424aa91 Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Fri, 18 Sep 2009 12:44:18 -0700
Subject: ARM: STMP3xxx: deallocation with negative index of descriptors[]

The last deallocation is invalid. In the last iteration, i is -1.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: dmitry pervushin <dpervushin@embeddedalley.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/plat-stmp3xxx/dma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-stmp3xxx/dma.c b/arch/arm/plat-stmp3xxx/dma.c
index d2f497764dc..ef88f25fb87 100644
--- a/arch/arm/plat-stmp3xxx/dma.c
+++ b/arch/arm/plat-stmp3xxx/dma.c
@@ -264,7 +264,7 @@ int stmp3xxx_dma_make_chain(int ch, struct stmp37xx_circ_dma_chain *chain,
 					stmp3xxx_dma_free_command(ch,
 								  &descriptors
 								  [i]);
-				} while (i-- >= 0);
+				} while (i-- > 0);
 			}
 			return err;
 		}
-- 
cgit v1.2.3


From 3318c4bddba34be4881cfcf8cf3d56e41678b716 Mon Sep 17 00:00:00 2001
From: Pavel Machek <pavel@ucw.cz>
Date: Fri, 18 Sep 2009 12:44:19 -0700
Subject: ARM: spitz: fix touchscreen max presure

This fixes max_pressure for spitz's touchscreen, and is requirement
for getting reasonable pressure numbers from touchscreen driver.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/spitz.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index dda310fe71c..08d08f4a383 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -296,6 +296,7 @@ static struct ads7846_platform_data spitz_ads7846_info = {
 	.vref_delay_usecs	= 100,
 	.x_plate_ohms		= 419,
 	.y_plate_ohms		= 486,
+	.pressure_max		= 1024,
 	.gpio_pendown		= SPITZ_GPIO_TP_INT,
 	.wait_for_sync		= spitz_wait_for_hsync,
 };
-- 
cgit v1.2.3


From 7da18afa423f167e7ef3c9728e584d8bf05bd55a Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Fri, 18 Sep 2009 12:44:17 -0700
Subject: ARM: s3c: fix check of index into s3c_gpios[]

The check of the s3c_gpios[] index had an off-by-one.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/plat-s3c/gpio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c/gpio.c b/arch/arm/plat-s3c/gpio.c
index 260fdc6ad68..5ff24e0f9f8 100644
--- a/arch/arm/plat-s3c/gpio.c
+++ b/arch/arm/plat-s3c/gpio.c
@@ -28,7 +28,7 @@ static __init void s3c_gpiolib_track(struct s3c_gpio_chip *chip)
 
 	gpn = chip->chip.base;
 	for (i = 0; i < chip->chip.ngpio; i++, gpn++) {
-		BUG_ON(gpn > ARRAY_SIZE(s3c_gpios));
+		BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios));
 		s3c_gpios[gpn] = chip;
 	}
 }
-- 
cgit v1.2.3


From 778dbcc1ebea6f9a560020110987449bf4607e5f Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Fri, 18 Sep 2009 12:51:44 -0700
Subject: mtd: onenand: make onenand/generic.c more generic

Remove the ARM dependency from the generic "onenand" platform device
driver.  This change makes the driver useful for other architectures as
well.  Needed for the SuperH kfr2r09 board.

Apart from the obvious Kconfig bits, the most important change is the move
away from ARM specific includes and platform data.  Together with this
change the only in-tree board code gets an update, and the driver name is
also changed gracefully break potential out of tree drivers.

The driver is also updated to allow NULL as platform data together with a
few changes to make use of resource_size() and dev_name().

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Kyungmin Park <kmpark@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 arch/arm/mach-omap2/board-apollon.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index dcfc20d0389..b4d4ef6d90b 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -87,7 +87,7 @@ static struct mtd_partition apollon_partitions[] = {
 	},
 };
 
-static struct flash_platform_data apollon_flash_data = {
+static struct onenand_platform_data apollon_flash_data = {
 	.parts		= apollon_partitions,
 	.nr_parts	= ARRAY_SIZE(apollon_partitions),
 };
@@ -99,7 +99,7 @@ static struct resource apollon_flash_resource[] = {
 };
 
 static struct platform_device apollon_onenand_device = {
-	.name		= "onenand",
+	.name		= "onenand-flash",
 	.id		= -1,
 	.dev		= {
 		.platform_data	= &apollon_flash_data,
-- 
cgit v1.2.3


From 59e9c5ae17179fe561103fbe0808fac5976ca1bd Mon Sep 17 00:00:00 2001
From: vimal singh <vimalsingh@ti.com>
Date: Mon, 13 Jul 2009 16:26:24 +0530
Subject: mtd: omap: add support for nand prefetch-read and post-write

This patch adds prefetch support to access nand flash in mpu mode.
This patch also adds 8-bit nand support (omap_read/write_buf8).
Prefetch can be used for both 8- and 16-bit devices.

Signed-off-by: Vimal Singh <vimalsingh@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 arch/arm/mach-omap2/gpmc.c             | 63 +++++++++++++++++++++++++++++++++-
 arch/arm/plat-omap/include/mach/gpmc.h |  4 +++
 2 files changed, 66 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index f91934b2b09..15876828db2 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -57,6 +57,11 @@
 #define GPMC_CHUNK_SHIFT	24		/* 16 MB */
 #define GPMC_SECTION_SHIFT	28		/* 128 MB */
 
+#define PREFETCH_FIFOTHRESHOLD	(0x40 << 8)
+#define CS_NUM_SHIFT		24
+#define ENABLE_PREFETCH		(0x1 << 7)
+#define DMA_MPU_MODE		2
+
 static struct resource	gpmc_mem_root;
 static struct resource	gpmc_cs_mem[GPMC_CS_NUM];
 static DEFINE_SPINLOCK(gpmc_mem_lock);
@@ -386,6 +391,63 @@ void gpmc_cs_free(int cs)
 }
 EXPORT_SYMBOL(gpmc_cs_free);
 
+/**
+ * gpmc_prefetch_enable - configures and starts prefetch transfer
+ * @cs: nand cs (chip select) number
+ * @dma_mode: dma mode enable (1) or disable (0)
+ * @u32_count: number of bytes to be transferred
+ * @is_write: prefetch read(0) or write post(1) mode
+ */
+int gpmc_prefetch_enable(int cs, int dma_mode,
+				unsigned int u32_count, int is_write)
+{
+	uint32_t prefetch_config1;
+
+	if (!(gpmc_read_reg(GPMC_PREFETCH_CONTROL))) {
+		/* Set the amount of bytes to be prefetched */
+		gpmc_write_reg(GPMC_PREFETCH_CONFIG2, u32_count);
+
+		/* Set dma/mpu mode, the prefetch read / post write and
+		 * enable the engine. Set which cs is has requested for.
+		 */
+		prefetch_config1 = ((cs << CS_NUM_SHIFT) |
+					PREFETCH_FIFOTHRESHOLD |
+					ENABLE_PREFETCH |
+					(dma_mode << DMA_MPU_MODE) |
+					(0x1 & is_write));
+		gpmc_write_reg(GPMC_PREFETCH_CONFIG1, prefetch_config1);
+	} else {
+		return -EBUSY;
+	}
+	/*  Start the prefetch engine */
+	gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x1);
+
+	return 0;
+}
+EXPORT_SYMBOL(gpmc_prefetch_enable);
+
+/**
+ * gpmc_prefetch_reset - disables and stops the prefetch engine
+ */
+void gpmc_prefetch_reset(void)
+{
+	/* Stop the PFPW engine */
+	gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x0);
+
+	/* Reset/disable the PFPW engine */
+	gpmc_write_reg(GPMC_PREFETCH_CONFIG1, 0x0);
+}
+EXPORT_SYMBOL(gpmc_prefetch_reset);
+
+/**
+ * gpmc_prefetch_status - reads prefetch status of engine
+ */
+int  gpmc_prefetch_status(void)
+{
+	return gpmc_read_reg(GPMC_PREFETCH_STATUS);
+}
+EXPORT_SYMBOL(gpmc_prefetch_status);
+
 static void __init gpmc_mem_init(void)
 {
 	int cs;
@@ -452,6 +514,5 @@ void __init gpmc_init(void)
 	l &= 0x03 << 3;
 	l |= (0x02 << 3) | (1 << 0);
 	gpmc_write_reg(GPMC_SYSCONFIG, l);
-
 	gpmc_mem_init();
 }
diff --git a/arch/arm/plat-omap/include/mach/gpmc.h b/arch/arm/plat-omap/include/mach/gpmc.h
index 921b16532ff..9c99cda77ba 100644
--- a/arch/arm/plat-omap/include/mach/gpmc.h
+++ b/arch/arm/plat-omap/include/mach/gpmc.h
@@ -103,6 +103,10 @@ extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
 extern void gpmc_cs_free(int cs);
 extern int gpmc_cs_set_reserved(int cs, int reserved);
 extern int gpmc_cs_reserved(int cs);
+extern int gpmc_prefetch_enable(int cs, int dma_mode,
+					unsigned int u32_count, int is_write);
+extern void gpmc_prefetch_reset(void);
+extern int gpmc_prefetch_status(void);
 extern void __init gpmc_init(void);
 
 #endif
-- 
cgit v1.2.3


From caa27b66bd7188fd063769eaf4b33533ef0709e6 Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <sam@ravnborg.org>
Date: Mon, 20 Jul 2009 21:37:11 +0200
Subject: kbuild: use INSTALLKERNEL to select customized installkernel script

Replace the use of CROSS_COMPILE to select a customized
installkernel script with the possibility to set INSTALLKERNEL
to select a custom installkernel script when running make:

    make INSTALLKERNEL=arm-installkernel install

With this patch we are now more consistent across
different architectures - they did not all support use
of CROSS_COMPILE.

The use of CROSS_COMPILE was a hack as this really belongs
to gcc/binutils and the installkernel script does not change
just because we change toolchain.

The use of CROSS_COMPILE caused troubles with an upcoming patch
that saves CROSS_COMPILE when a kernel is built - it would no
longer be installable.
[Thanks to Peter Z. for this hint]

This patch undos what Ian did in commit:

  0f8e2d62fa04441cd12c08ce521e84e5bd3f8a46
  ("use ${CROSS_COMPILE}installkernel in arch/*/boot/install.sh")

The patch has been lightly tested on x86 only - but all changes
looks obvious.

Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Mike Frysinger <vapier@gentoo.org> [blackfin]
Acked-by: Russell King <linux@arm.linux.org.uk> [arm]
Acked-by: Paul Mundt <lethal@linux-sh.org> [sh]
Acked-by: "H. Peter Anvin" <hpa@zytor.com> [x86]
Cc: Ian Campbell <icampbell@arcom.com>
Cc: Tony Luck <tony.luck@intel.com> [ia64]
Cc: Fenghua Yu <fenghua.yu@intel.com> [ia64]
Cc: Hirokazu Takata <takata@linux-m32r.org> [m32r]
Cc: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Cc: Kyle McMartin <kyle@mcmartin.ca> [parisc]
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> [powerpc]
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390]
Cc: Thomas Gleixner <tglx@linutronix.de> [x86]
Cc: Ingo Molnar <mingo@redhat.com> [x86]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 arch/arm/Makefile        | 4 ++--
 arch/arm/boot/install.sh | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 7350557a81e..68c6ab0749d 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -279,7 +279,7 @@ define archhelp
   echo  '                  (supply initrd image via make variable INITRD=<path>)'
   echo  '  install       - Install uncompressed kernel'
   echo  '  zinstall      - Install compressed kernel'
-  echo  '                  Install using (your) ~/bin/installkernel or'
-  echo  '                  (distribution) /sbin/installkernel or'
+  echo  '                  Install using (your) ~/bin/$(INSTALLKERNEL) or'
+  echo  '                  (distribution) /sbin/$(INSTALLKERNEL) or'
   echo  '                  install to $$(INSTALL_PATH) and run lilo'
 endef
diff --git a/arch/arm/boot/install.sh b/arch/arm/boot/install.sh
index 9f9bed20734..06ea7d42ce8 100644
--- a/arch/arm/boot/install.sh
+++ b/arch/arm/boot/install.sh
@@ -21,8 +21,8 @@
 #
 
 # User may have a custom install script
-if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi
-if [ -x /sbin/${CROSS_COMPILE}installkernel ]; then exec /sbin/${CROSS_COMPILE}installkernel "$@"; fi
+if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
 
 if [ "$(basename $2)" = "zImage" ]; then
 # Compressed install
-- 
cgit v1.2.3


From 51b563fc93c8cb5bff1d67a0a71c374e4a4ea049 Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <sam@ravnborg.org>
Date: Sun, 20 Sep 2009 12:28:22 +0200
Subject: arm, cris, mips, sparc, powerpc, um, xtensa: fix build with bash 4.0

Albin Tonnerre <albin.tonnerre@free-electrons.com> reported:

    Bash 4 filters out variables which contain a dot in them.
    This happends to be the case of CPPFLAGS_vmlinux.lds.
    This is rather unfortunate, as it now causes
    build failures when using SHELL=/bin/bash to compile,
    or when bash happens to be used by make (eg when it's /bin/sh)

Remove the common definition of CPPFLAGS_vmlinux.lds by
pushing relevant stuff to either Makefile.build or the
arch specific kernel/Makefile where we build the linker script.

This is also nice cleanup as we move the information out where
it is used.

Notes for the different architectures touched:

arm - we use an already exported symbol
cris - we use a config symbol aleady available
       [Not build tested]
mips - the jiffies complexity has moved to vmlinux.lds.S where we need it.
       Added a few variables to CPPFLAGS - they are only used by
       the linker script.
       [Not build tested]
powerpc - removed assignment that is not needed
          [not build tested]
sparc - simplified it using $(BITS)
um - introduced a few new exported variables to deal with this
xtensa - added options to CPP invocation
         [not build tested]

Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 arch/arm/Makefile        | 2 +-
 arch/arm/kernel/Makefile | 3 ++-
 2 files changed, 3 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 68c6ab0749d..c695fdac5b3 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -14,7 +14,7 @@ LDFLAGS_vmlinux	:=-p --no-undefined -X
 ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
 LDFLAGS_vmlinux	+= --be8
 endif
-CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET)
+
 OBJCOPYFLAGS	:=-O binary -R .note -R .note.gnu.build-id -R .comment -S
 GZFLAGS		:=-9
 #KBUILD_CFLAGS	+=-pipe
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 3213c9382b1..c446aeff7b8 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -2,7 +2,8 @@
 # Makefile for the linux kernel.
 #
 
-AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
+CPPFLAGS_vmlinux.lds := -DTEXT_OFFSET=$(TEXT_OFFSET)
+AFLAGS_head.o        := -DTEXT_OFFSET=$(TEXT_OFFSET)
 
 ifdef CONFIG_DYNAMIC_FTRACE
 CFLAGS_REMOVE_ftrace.o = -pg
-- 
cgit v1.2.3


From 4275c13ca8859af8a1390856c82173bcdfc32938 Mon Sep 17 00:00:00 2001
From: Dmitry Artamonow <mad_soft@inbox.ru>
Date: Sat, 19 Sep 2009 05:58:54 +0100
Subject: ARM: 5712/1: SA1100: initialise spinlock in DMA code

Declare it using DEFINE_SPINLOCK()

Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-sa1100/dma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-sa1100/dma.c b/arch/arm/mach-sa1100/dma.c
index 95f9c5a6d6d..cb4521a6f42 100644
--- a/arch/arm/mach-sa1100/dma.c
+++ b/arch/arm/mach-sa1100/dma.c
@@ -39,7 +39,7 @@ typedef struct {
 
 static sa1100_dma_t dma_chan[SA1100_DMA_CHANNELS];
 
-static spinlock_t dma_list_lock;
+static DEFINE_SPINLOCK(dma_list_lock);
 
 
 static irqreturn_t dma_irq_handler(int irq, void *dev_id)
-- 
cgit v1.2.3


From c88d6aa71bd2ad7b4da2f281bd64ada65d533d83 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun, 20 Sep 2009 12:41:58 +0100
Subject: ARM: Provide definitions and helpers for decoding the FSR register

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/fault.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index cc8829d7e11..1bb38712c86 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -25,6 +25,18 @@
 
 #include "fault.h"
 
+/*
+ * Fault status register encodings
+ */
+#define FSR_WRITE		(1 << 11)
+#define FSR_FS4			(1 << 10)
+#define FSR_FS3_0		(15)
+
+static inline int fsr_fs(unsigned int fsr)
+{
+	return (fsr & FSR_FS3_0) | (fsr & FSR_FS4) >> 6;
+}
+
 #ifdef CONFIG_MMU
 
 #ifdef CONFIG_KPROBES
@@ -201,7 +213,7 @@ __do_page_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr,
 	 * memory access, so we can handle it.
 	 */
 good_area:
-	if (fsr & (1 << 11)) /* write? */
+	if (fsr & FSR_WRITE)
 		mask = VM_WRITE;
 	else
 		mask = VM_READ|VM_EXEC|VM_WRITE;
@@ -216,7 +228,7 @@ good_area:
 	 * than endlessly redo the fault.
 	 */
 survive:
-	fault = handle_mm_fault(mm, vma, addr & PAGE_MASK, (fsr & (1 << 11)) ? FAULT_FLAG_WRITE : 0);
+	fault = handle_mm_fault(mm, vma, addr & PAGE_MASK, (fsr & FSR_WRITE) ? FAULT_FLAG_WRITE : 0);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
 			goto out_of_memory;
@@ -489,7 +501,7 @@ hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *)
 asmlinkage void __exception
 do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 {
-	const struct fsr_info *inf = fsr_info + (fsr & 15) + ((fsr & (1 << 10)) >> 6);
+	const struct fsr_info *inf = fsr_info + fsr_fs(fsr);
 	struct siginfo info;
 
 	if (!inf->fn(addr, fsr, regs))
-- 
cgit v1.2.3


From b42c6344b091db680fd1ec7a0483e8b6796f802b Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun, 20 Sep 2009 12:47:40 +0100
Subject: ARM: Update page fault handling for new OOM techniques

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/fault.c | 47 ++++++++++++++---------------------------------
 1 file changed, 14 insertions(+), 33 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 1bb38712c86..501304f7e30 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -223,37 +223,18 @@ good_area:
 		goto out;
 
 	/*
-	 * If for any reason at all we couldn't handle
-	 * the fault, make sure we exit gracefully rather
-	 * than endlessly redo the fault.
+	 * If for any reason at all we couldn't handle the fault, make
+	 * sure we exit gracefully rather than endlessly redo the fault.
 	 */
-survive:
 	fault = handle_mm_fault(mm, vma, addr & PAGE_MASK, (fsr & FSR_WRITE) ? FAULT_FLAG_WRITE : 0);
-	if (unlikely(fault & VM_FAULT_ERROR)) {
-		if (fault & VM_FAULT_OOM)
-			goto out_of_memory;
-		else if (fault & VM_FAULT_SIGBUS)
-			return fault;
-		BUG();
-	}
+	if (unlikely(fault & VM_FAULT_ERROR))
+		return fault;
 	if (fault & VM_FAULT_MAJOR)
 		tsk->maj_flt++;
 	else
 		tsk->min_flt++;
 	return fault;
 
-out_of_memory:
-	if (!is_global_init(tsk))
-		goto out;
-
-	/*
-	 * If we are out of memory for pid1, sleep for a while and retry
-	 */
-	up_read(&mm->mmap_sem);
-	yield();
-	down_read(&mm->mmap_sem);
-	goto survive;
-
 check_stack:
 	if (vma->vm_flags & VM_GROWSDOWN && !expand_stack(vma, addr))
 		goto good_area;
@@ -301,6 +282,16 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	if (likely(!(fault & (VM_FAULT_ERROR | VM_FAULT_BADMAP | VM_FAULT_BADACCESS))))
 		return 0;
 
+	if (fault & VM_FAULT_OOM) {
+		/*
+		 * We ran out of memory, call the OOM killer, and return to
+		 * userspace (which will retry the fault, or kill us if we
+		 * got oom-killed)
+		 */
+		pagefault_out_of_memory();
+		return 0;
+	}
+
 	/*
 	 * If we are in kernel mode at this point, we
 	 * have no context to handle this fault with.
@@ -308,16 +299,6 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	if (!user_mode(regs))
 		goto no_context;
 
-	if (fault & VM_FAULT_OOM) {
-		/*
-		 * We ran out of memory, or some other thing
-		 * happened to us that made us unable to handle
-		 * the page fault gracefully.
-		 */
-		printk("VM: killing process %s\n", tsk->comm);
-		do_group_exit(SIGKILL);
-		return 0;
-	}
 	if (fault & VM_FAULT_SIGBUS) {
 		/*
 		 * We had some memory, but were unable to
-- 
cgit v1.2.3


From bf4569922b97824f33e5d08d0bbe4b34fe43e4cd Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun, 20 Sep 2009 12:52:19 +0100
Subject: ARM: Ensure correct might_sleep() check in pagefault path

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/fault.c | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 501304f7e30..b8b3bb4423c 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -271,6 +271,13 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 		if (!user_mode(regs) && !search_exception_tables(regs->ARM_pc))
 			goto no_context;
 		down_read(&mm->mmap_sem);
+	} else {
+		/*
+		 * The above down_read_trylock() might have succeeded in
+		 * which case, we'll have missed the might_sleep() from
+		 * down_read()
+		 */
+		might_sleep();
 	}
 
 	fault = __do_page_fault(mm, addr, fsr, tsk);
-- 
cgit v1.2.3


From 63234717d170d39ee9cc873f29930b0fb142a114 Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@unipv.it>
Date: Wed, 29 Jul 2009 18:51:56 +0200
Subject: mtd: nand: driver for Nomadik 8815 SoC (on NHK8815 board)

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 arch/arm/configs/nhk8815_defconfig        |  2 +-
 arch/arm/mach-nomadik/board-nhk8815.c     | 92 +++++++++++++++++++++++++++++++
 arch/arm/mach-nomadik/include/mach/fsmc.h | 29 ++++++++++
 arch/arm/mach-nomadik/include/mach/nand.h | 16 ++++++
 4 files changed, 138 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-nomadik/include/mach/fsmc.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/nand.h

(limited to 'arch/arm')

diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig
index 9bb45b932f0..600cb270f2b 100644
--- a/arch/arm/configs/nhk8815_defconfig
+++ b/arch/arm/configs/nhk8815_defconfig
@@ -498,7 +498,7 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_ECC_SMC=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 # CONFIG_MTD_NAND_GPIO is not set
 CONFIG_MTD_NAND_IDS=y
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 79bdea943eb..59c1dbb686c 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -16,12 +16,103 @@
 #include <linux/amba/bus.h>
 #include <linux/interrupt.h>
 #include <linux/gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/io.h>
+#include <asm/sizes.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 #include <mach/setup.h>
+#include <mach/nand.h>
+#include <mach/fsmc.h>
 #include "clock.h"
 
+/* These adresses span 16MB, so use three individual pages */
+static struct resource nhk8815_nand_resources[] = {
+	{
+		.name = "nand_addr",
+		.start = NAND_IO_ADDR,
+		.end = NAND_IO_ADDR + 0xfff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.name = "nand_cmd",
+		.start = NAND_IO_CMD,
+		.end = NAND_IO_CMD + 0xfff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.name = "nand_data",
+		.start = NAND_IO_DATA,
+		.end = NAND_IO_DATA + 0xfff,
+		.flags = IORESOURCE_MEM,
+	}
+};
+
+static int nhk8815_nand_init(void)
+{
+	/* FSMC setup for nand chip select (8-bit nand in 8815NHK) */
+	writel(0x0000000E, FSMC_PCR(0));
+	writel(0x000D0A00, FSMC_PMEM(0));
+	writel(0x00100A00, FSMC_PATT(0));
+
+	/* enable access to the chip select area */
+	writel(readl(FSMC_PCR(0)) | 0x04, FSMC_PCR(0));
+
+	return 0;
+}
+
+/*
+ * These partitions are the same as those used in the 2.6.20 release
+ * shipped by the vendor; the first two partitions are mandated
+ * by the boot ROM, and the bootloader area is somehow oversized...
+ */
+static struct mtd_partition nhk8815_partitions[] = {
+	{
+		.name	= "X-Loader(NAND)",
+		.offset = 0,
+		.size	= SZ_256K,
+	}, {
+		.name	= "MemInit(NAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= SZ_256K,
+	}, {
+		.name	= "BootLoader(NAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= SZ_2M,
+	}, {
+		.name	= "Kernel zImage(NAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 3 * SZ_1M,
+	}, {
+		.name	= "Root Filesystem(NAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 22 * SZ_1M,
+	}, {
+		.name	= "User Filesystem(NAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct nomadik_nand_platform_data nhk8815_nand_data = {
+	.parts		= nhk8815_partitions,
+	.nparts		= ARRAY_SIZE(nhk8815_partitions),
+	.options	= NAND_COPYBACK | NAND_CACHEPRG | NAND_NO_PADDING \
+			| NAND_NO_READRDY | NAND_NO_AUTOINCR,
+	.init		= nhk8815_nand_init,
+};
+
+static struct platform_device nhk8815_nand_device = {
+	.name		= "nomadik_nand",
+	.dev		= {
+		.platform_data = &nhk8815_nand_data,
+	},
+	.resource	= nhk8815_nand_resources,
+	.num_resources	= ARRAY_SIZE(nhk8815_nand_resources),
+};
+
+
 #define __MEM_4K_RESOURCE(x) \
 	.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
 
@@ -81,6 +172,7 @@ static int __init nhk8815_eth_init(void)
 device_initcall(nhk8815_eth_init);
 
 static struct platform_device *nhk8815_platform_devices[] __initdata = {
+	&nhk8815_nand_device,
 	&nhk8815_eth_device,
 	/* will add more devices */
 };
diff --git a/arch/arm/mach-nomadik/include/mach/fsmc.h b/arch/arm/mach-nomadik/include/mach/fsmc.h
new file mode 100644
index 00000000000..8c2c0518368
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/fsmc.h
@@ -0,0 +1,29 @@
+
+/* Definitions for the Nomadik FSMC "Flexible Static Memory controller" */
+
+#ifndef __ASM_ARCH_FSMC_H
+#define __ASM_ARCH_FSMC_H
+
+#include <mach/hardware.h>
+/*
+ * Register list
+ */
+
+/* bus control reg. and bus timing reg. for CS0..CS3 */
+#define FSMC_BCR(x)     (NOMADIK_FSMC_VA + (x << 3))
+#define FSMC_BTR(x)     (NOMADIK_FSMC_VA + (x << 3) + 0x04)
+
+/* PC-card and NAND:
+ * PCR = control register
+ * PMEM = memory timing
+ * PATT = attribute timing
+ * PIO = I/O timing
+ * PECCR = ECC result
+ */
+#define FSMC_PCR(x)     (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x00)
+#define FSMC_PMEM(x)    (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x08)
+#define FSMC_PATT(x)    (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x0c)
+#define FSMC_PIO(x)     (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x10)
+#define FSMC_PECCR(x)   (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x14)
+
+#endif /* __ASM_ARCH_FSMC_H */
diff --git a/arch/arm/mach-nomadik/include/mach/nand.h b/arch/arm/mach-nomadik/include/mach/nand.h
new file mode 100644
index 00000000000..c3c8254c22a
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/nand.h
@@ -0,0 +1,16 @@
+#ifndef __ASM_ARCH_NAND_H
+#define __ASM_ARCH_NAND_H
+
+struct nomadik_nand_platform_data {
+	struct mtd_partition *parts;
+	int nparts;
+	int options;
+	int (*init) (void);
+	int (*exit) (void);
+};
+
+#define NAND_IO_DATA	0x40000000
+#define NAND_IO_CMD	0x40800000
+#define NAND_IO_ADDR	0x41000000
+
+#endif				/* __ASM_ARCH_NAND_H */
-- 
cgit v1.2.3


From 8b85e7cbcfedfcdc2fa1bcc8945f23fc6ad3d07f Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@unipv.it>
Date: Fri, 24 Jul 2009 13:30:04 +0200
Subject: mtd: OneNand support for Nomadik 8815 SoC (on NHK8815 board)

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 arch/arm/mach-nomadik/board-nhk8815.c | 63 +++++++++++++++++++++++++++++++++++
 1 file changed, 63 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 59c1dbb686c..6bfd537d5af 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -24,6 +24,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
 #include <mach/setup.h>
 #include <mach/nand.h>
 #include <mach/fsmc.h>
@@ -112,6 +113,66 @@ static struct platform_device nhk8815_nand_device = {
 	.num_resources	= ARRAY_SIZE(nhk8815_nand_resources),
 };
 
+/* These are the partitions for the OneNand device, different from above */
+static struct mtd_partition nhk8815_onenand_partitions[] = {
+	{
+		.name	= "X-Loader(OneNAND)",
+		.offset = 0,
+		.size	= SZ_256K,
+	}, {
+		.name	= "MemInit(OneNAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= SZ_256K,
+	}, {
+		.name	= "BootLoader(OneNAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= SZ_2M-SZ_256K,
+	}, {
+		.name	= "SysImage(OneNAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 4 * SZ_1M,
+	}, {
+		.name	= "Root Filesystem(OneNAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 22 * SZ_1M,
+	}, {
+		.name	= "User Filesystem(OneNAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct flash_platform_data nhk8815_onenand_data = {
+	.parts		= nhk8815_onenand_partitions,
+	.nr_parts	= ARRAY_SIZE(nhk8815_onenand_partitions),
+};
+
+static struct resource nhk8815_onenand_resource[] = {
+	{
+		.start		= 0x30000000,
+		.end		= 0x30000000 + SZ_128K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device nhk8815_onenand_device = {
+	.name		= "onenand",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &nhk8815_onenand_data,
+	},
+	.resource	= nhk8815_onenand_resource,
+	.num_resources	= ARRAY_SIZE(nhk8815_onenand_resource),
+};
+
+static void __init nhk8815_onenand_init(void)
+{
+#ifdef CONFIG_ONENAND
+       /* Set up SMCS0 for OneNand */
+       writel(0x000030db, FSMC_BCR0);
+       writel(0x02100551, FSMC_BTR0);
+#endif
+}
 
 #define __MEM_4K_RESOURCE(x) \
 	.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
@@ -173,6 +234,7 @@ device_initcall(nhk8815_eth_init);
 
 static struct platform_device *nhk8815_platform_devices[] __initdata = {
 	&nhk8815_nand_device,
+	&nhk8815_onenand_device,
 	&nhk8815_eth_device,
 	/* will add more devices */
 };
@@ -182,6 +244,7 @@ static void __init nhk8815_platform_init(void)
 	int i;
 
 	cpu8815_platform_init();
+	nhk8815_onenand_init();
 	platform_add_devices(nhk8815_platform_devices,
 			     ARRAY_SIZE(nhk8815_platform_devices));
 
-- 
cgit v1.2.3


From d374bf14a5ff18133bd6a6cc00f189949f7ba8fb Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun, 20 Sep 2009 12:53:01 +0100
Subject: ARM: Separate out access error checking

Since we get notified separately about prefetch aborts, which may be
permission faults, we need to check for appropriate access permissions
when handling a fault.  This patch prepares us for doing this by
separating out the access error checking.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/fault.c | 33 ++++++++++++++++++++++-----------
 1 file changed, 22 insertions(+), 11 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index b8b3bb4423c..b7ce07d416c 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -194,18 +194,33 @@ void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 #define VM_FAULT_BADMAP		0x010000
 #define VM_FAULT_BADACCESS	0x020000
 
-static int
+/*
+ * Check that the permissions on the VMA allow for the fault which occurred.
+ * If we encountered a write fault, we must have write permission, otherwise
+ * we allow any permission.
+ */
+static inline bool access_error(unsigned int fsr, struct vm_area_struct *vma)
+{
+	unsigned int mask = VM_READ | VM_WRITE | VM_EXEC;
+
+	if (fsr & FSR_WRITE)
+		mask = VM_WRITE;
+
+	return vma->vm_flags & mask ? false : true;
+}
+
+static int __kprobes
 __do_page_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr,
 		struct task_struct *tsk)
 {
 	struct vm_area_struct *vma;
-	int fault, mask;
+	int fault;
 
 	vma = find_vma(mm, addr);
 	fault = VM_FAULT_BADMAP;
-	if (!vma)
+	if (unlikely(!vma))
 		goto out;
-	if (vma->vm_start > addr)
+	if (unlikely(vma->vm_start > addr))
 		goto check_stack;
 
 	/*
@@ -213,14 +228,10 @@ __do_page_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr,
 	 * memory access, so we can handle it.
 	 */
 good_area:
-	if (fsr & FSR_WRITE)
-		mask = VM_WRITE;
-	else
-		mask = VM_READ|VM_EXEC|VM_WRITE;
-
-	fault = VM_FAULT_BADACCESS;
-	if (!(vma->vm_flags & mask))
+	if (access_error(fsr, vma)) {
+		fault = VM_FAULT_BADACCESS;
 		goto out;
+	}
 
 	/*
 	 * If for any reason at all we couldn't handle the fault, make
-- 
cgit v1.2.3


From df297bf6c7933e7b021cdc1bf3f9e319ea3a7e9c Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun, 20 Sep 2009 13:18:47 +0100
Subject: ARM: Add support for checking access permissions on prefetch aborts

ARMv6 introduces non-executable mappings, which can cause prefetch aborts
when an attempt is made to execute from such a mapping.  Currently, this
causes us to loop in the page fault handler since we don't correctly
check for proper permissions.

Fix this by checking that VMAs have VM_EXEC set for prefetch aborts.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/fault.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index b7ce07d416c..379f7855605 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -26,8 +26,9 @@
 #include "fault.h"
 
 /*
- * Fault status register encodings
+ * Fault status register encodings.  We steal bit 31 for our own purposes.
  */
+#define FSR_LNX_PF		(1 << 31)
 #define FSR_WRITE		(1 << 11)
 #define FSR_FS4			(1 << 10)
 #define FSR_FS3_0		(15)
@@ -205,6 +206,8 @@ static inline bool access_error(unsigned int fsr, struct vm_area_struct *vma)
 
 	if (fsr & FSR_WRITE)
 		mask = VM_WRITE;
+	if (fsr & FSR_LNX_PF)
+		mask = VM_EXEC;
 
 	return vma->vm_flags & mask ? false : true;
 }
@@ -503,7 +506,7 @@ do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	const struct fsr_info *inf = fsr_info + fsr_fs(fsr);
 	struct siginfo info;
 
-	if (!inf->fn(addr, fsr, regs))
+	if (!inf->fn(addr, fsr & ~FSR_LNX_PF, regs))
 		return;
 
 	printk(KERN_ALERT "Unhandled fault: %s (0x%03x) at 0x%08lx\n",
@@ -519,6 +522,6 @@ do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 asmlinkage void __exception
 do_PrefetchAbort(unsigned long addr, struct pt_regs *regs)
 {
-	do_translation_fault(addr, 0, regs);
+	do_translation_fault(addr, FSR_LNX_PF, regs);
 }
 
-- 
cgit v1.2.3


From d200c922bc2b1ac88b8d33b6cfff2ed837af186a Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Sun, 20 Sep 2009 18:14:13 -0400
Subject: Use new __init_task_data macro in arch init_task.c files.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 arch/arm/kernel/init_task.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/init_task.c b/arch/arm/kernel/init_task.c
index 3f470866bb8..e7cbb50dc35 100644
--- a/arch/arm/kernel/init_task.c
+++ b/arch/arm/kernel/init_task.c
@@ -24,9 +24,8 @@ static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
  *
  * The things we do for performance..
  */
-union thread_union init_thread_union
-	__attribute__((__section__(".data.init_task"))) =
-		{ INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+	{ INIT_THREAD_INFO(init_task) };
 
 /*
  * Initial task structure.
-- 
cgit v1.2.3


From cdd6c482c9ff9c55475ee7392ec8f672eddb7be6 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Mon, 21 Sep 2009 12:02:48 +0200
Subject: perf: Do the big rename: Performance Counters -> Performance Events

Bye-bye Performance Counters, welcome Performance Events!

In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.

Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.

All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)

The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.

Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.

User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)

This patch has been generated via the following script:

  FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')

  sed -i \
    -e 's/PERF_EVENT_/PERF_RECORD_/g' \
    -e 's/PERF_COUNTER/PERF_EVENT/g' \
    -e 's/perf_counter/perf_event/g' \
    -e 's/nb_counters/nb_events/g' \
    -e 's/swcounter/swevent/g' \
    -e 's/tpcounter_event/tp_event/g' \
    $FILES

  for N in $(find . -name perf_counter.[ch]); do
    M=$(echo $N | sed 's/perf_counter/perf_event/g')
    mv $N $M
  done

  FILES=$(find . -name perf_event.*)

  sed -i \
    -e 's/COUNTER_MASK/REG_MASK/g' \
    -e 's/COUNTER/EVENT/g' \
    -e 's/\<event\>/event_id/g' \
    -e 's/counter/event/g' \
    -e 's/Counter/Event/g' \
    $FILES

... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.

Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.

( NOTE: 'counters' are still the proper terminology when we deal
  with hardware registers - and these sed scripts are a bit
  over-eager in renaming them. I've undone some of that, but
  in case there's something left where 'counter' would be
  better than 'event' we can undo that on an individual basis
  instead of touching an otherwise nicely automated patch. )

Suggested-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/arm/include/asm/unistd.h | 2 +-
 arch/arm/kernel/calls.S       | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index 9122c9ee18f..89f7eade20a 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -390,7 +390,7 @@
 #define __NR_preadv			(__NR_SYSCALL_BASE+361)
 #define __NR_pwritev			(__NR_SYSCALL_BASE+362)
 #define __NR_rt_tgsigqueueinfo		(__NR_SYSCALL_BASE+363)
-#define __NR_perf_counter_open		(__NR_SYSCALL_BASE+364)
+#define __NR_perf_event_open		(__NR_SYSCALL_BASE+364)
 
 /*
  * The following SWIs are ARM private.
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index ecfa98954d1..fafce1b5c69 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -373,7 +373,7 @@
 		CALL(sys_preadv)
 		CALL(sys_pwritev)
 		CALL(sys_rt_tgsigqueueinfo)
-		CALL(sys_perf_counter_open)
+		CALL(sys_perf_event_open)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted
-- 
cgit v1.2.3


From 4f37940d64a155c025968118849b596f6aaa8128 Mon Sep 17 00:00:00 2001
From: "Samuel R. C. Vale" <srcvale@holoscopio.com>
Date: Fri, 10 Jul 2009 12:07:15 -0300
Subject: trivial: fix typos in comments s/DGBU/DBGU/

DBGU means Debug Unit, was refered as "DGBU" in some files. Fixed to "DBGU".

Signed-off-by: Samuel R. C. Vale <srcvale@holoscopio.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 arch/arm/mach-at91/board-afeb-9260v1.c | 2 +-
 arch/arm/mach-at91/board-cam60.c       | 2 +-
 arch/arm/mach-at91/board-neocore926.c  | 2 +-
 arch/arm/mach-at91/board-qil-a9260.c   | 2 +-
 arch/arm/mach-at91/board-sam9260ek.c   | 2 +-
 arch/arm/mach-at91/board-sam9261ek.c   | 2 +-
 arch/arm/mach-at91/board-sam9263ek.c   | 2 +-
 arch/arm/mach-at91/board-sam9g20ek.c   | 2 +-
 arch/arm/mach-at91/board-sam9rlek.c    | 2 +-
 arch/arm/mach-at91/board-usb-a9260.c   | 2 +-
 arch/arm/mach-at91/board-usb-a9263.c   | 2 +-
 11 files changed, 11 insertions(+), 11 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index 61e52b66bc7..50667bed7cc 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -53,7 +53,7 @@ static void __init afeb9260_map_io(void)
 	/* Initialize processor: 18.432 MHz crystal */
 	at91sam9260_initialize(18432000);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index d3ba29c5d8c..02138af631e 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -50,7 +50,7 @@ static void __init cam60_map_io(void)
 	/* Initialize processor: 10 MHz crystal */
 	at91sam9260_initialize(10000000);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* set serial console to ttyS0 (ie, DBGU) */
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index 9ba7ba2cc3b..8c0b71c95be 100644
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -56,7 +56,7 @@ static void __init neocore926_map_io(void)
 	/* Initialize processor: 20 MHz crystal */
 	at91sam9263_initialize(20000000);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index 4cff9a7e61d..664938e8f66 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -53,7 +53,7 @@ static void __init ek_map_io(void)
 	/* Initialize processor: 12.000 MHz crystal */
 	at91sam9260_initialize(12000000);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index 93a0f8b100e..ba9d501b5c5 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -54,7 +54,7 @@ static void __init ek_map_io(void)
 	/* Initialize processor: 18.432 MHz crystal */
 	at91sam9260_initialize(18432000);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index f9b19993a7a..c4c8865d52d 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -61,7 +61,7 @@ static void __init ek_map_io(void)
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* set serial console to ttyS0 (ie, DBGU) */
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 1bf7bd4cbe1..26f1aa6049a 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -57,7 +57,7 @@ static void __init ek_map_io(void)
 	/* Initialize processor: 16.367 MHz crystal */
 	at91sam9263_initialize(16367660);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index ca470d504ea..29cf8317748 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -50,7 +50,7 @@ static void __init ek_map_io(void)
 	/* Initialize processor: 18.432 MHz crystal */
 	at91sam9260_initialize(18432000);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 9d07679efce..94ffb5c103b 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -43,7 +43,7 @@ static void __init ek_map_io(void)
 	/* Initialize processor: 12.000 MHz crystal */
 	at91sam9rl_initialize(12000000);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c
index d13304c0bc4..905d6ef7680 100644
--- a/arch/arm/mach-at91/board-usb-a9260.c
+++ b/arch/arm/mach-at91/board-usb-a9260.c
@@ -53,7 +53,7 @@ static void __init ek_map_io(void)
 	/* Initialize processor: 12.000 MHz crystal */
 	at91sam9260_initialize(12000000);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* set serial console to ttyS0 (ie, DBGU) */
diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c
index d96405b7d57..b6a3480383e 100644
--- a/arch/arm/mach-at91/board-usb-a9263.c
+++ b/arch/arm/mach-at91/board-usb-a9263.c
@@ -52,7 +52,7 @@ static void __init ek_map_io(void)
 	/* Initialize processor: 12.00 MHz crystal */
 	at91sam9263_initialize(12000000);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* set serial console to ttyS0 (ie, DBGU) */
-- 
cgit v1.2.3


From 3dbda77e6f3375f87090cfce97b2551d3723521b Mon Sep 17 00:00:00 2001
From: Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
Date: Thu, 23 Jul 2009 08:31:31 +0200
Subject: trivial: fix typos "man[ae]g?ment" -> "management"

Signed-off-by: Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 arch/arm/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 7350557a81e..54661125a8b 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -25,7 +25,7 @@ KBUILD_CFLAGS	+=$(call cc-option,-marm,)
 # Select a platform tht is kept up-to-date
 KBUILD_DEFCONFIG := versatile_defconfig
 
-# defines filename extension depending memory manement type.
+# defines filename extension depending memory management type.
 ifeq ($(CONFIG_MMU),)
 MMUEXT		:= -nommu
 endif
-- 
cgit v1.2.3


From 6ff89e9d62014b0e21fad96cf4d72d68b3aa0d8c Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 24 Jul 2009 11:43:00 +0100
Subject: ARM: 5620/1: at91/dmaengine: integration of at_hdmac driver in
 at91sam9rl

This is the integration of DMA engine driver into at91sam9rl device file. The
associated driver is at_hdmac.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/at91sam9rl_devices.c | 47 +++++++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 728186515cd..1c2dced8748 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -21,10 +21,56 @@
 #include <mach/at91sam9rl.h>
 #include <mach/at91sam9rl_matrix.h>
 #include <mach/at91sam9_smc.h>
+#include <mach/at_hdmac.h>
 
 #include "generic.h"
 
 
+/* --------------------------------------------------------------------
+ *  HDMAC - AHB DMA Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
+static u64 hdmac_dmamask = DMA_BIT_MASK(32);
+
+static struct at_dma_platform_data atdma_pdata = {
+	.nr_channels	= 2,
+};
+
+static struct resource hdmac_resources[] = {
+	[0] = {
+		.start	= AT91_BASE_SYS + AT91_DMA,
+		.end	= AT91_BASE_SYS + AT91_DMA + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= AT91SAM9RL_ID_DMA,
+		.end	= AT91SAM9RL_ID_DMA,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at_hdmac_device = {
+	.name		= "at_hdmac",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &hdmac_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &atdma_pdata,
+	},
+	.resource	= hdmac_resources,
+	.num_resources	= ARRAY_SIZE(hdmac_resources),
+};
+
+void __init at91_add_device_hdmac(void)
+{
+	dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
+	platform_device_register(&at_hdmac_device);
+}
+#else
+void __init at91_add_device_hdmac(void) {}
+#endif
+
 /* --------------------------------------------------------------------
  *  USB HS Device (Gadget)
  * -------------------------------------------------------------------- */
@@ -1103,6 +1149,7 @@ void __init at91_add_device_serial(void) {}
  */
 static int __init at91_add_standard_devices(void)
 {
+	at91_add_device_hdmac();
 	at91_add_device_rtc();
 	at91_add_device_rtt();
 	at91_add_device_watchdog();
-- 
cgit v1.2.3


From 40262b2b6efac507005a2c981175266bf81152a7 Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 24 Jul 2009 11:43:01 +0100
Subject: ARM: 5621/1: at91/dmaengine: integration of at_hdmac driver in
 at91sam9g45 series

This is the integration of DMA engine driver into at91sam9g45 series
device file.
The associated driver is at_hdmac.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/at91sam9g45_devices.c | 49 ++++++++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index d746e8621bc..45720c84f0b 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -24,10 +24,58 @@
 #include <mach/at91sam9g45.h>
 #include <mach/at91sam9g45_matrix.h>
 #include <mach/at91sam9_smc.h>
+#include <mach/at_hdmac.h>
 
 #include "generic.h"
 
 
+/* --------------------------------------------------------------------
+ *  HDMAC - AHB DMA Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
+static u64 hdmac_dmamask = DMA_BIT_MASK(32);
+
+static struct at_dma_platform_data atdma_pdata = {
+	.nr_channels	= 8,
+};
+
+static struct resource hdmac_resources[] = {
+	[0] = {
+		.start	= AT91_BASE_SYS + AT91_DMA,
+		.end	= AT91_BASE_SYS + AT91_DMA + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= AT91SAM9G45_ID_DMA,
+		.end	= AT91SAM9G45_ID_DMA,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at_hdmac_device = {
+	.name		= "at_hdmac",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &hdmac_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &atdma_pdata,
+	},
+	.resource	= hdmac_resources,
+	.num_resources	= ARRAY_SIZE(hdmac_resources),
+};
+
+void __init at91_add_device_hdmac(void)
+{
+	dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
+	dma_cap_set(DMA_SLAVE, atdma_pdata.cap_mask);
+	platform_device_register(&at_hdmac_device);
+}
+#else
+void __init at91_add_device_hdmac(void) {}
+#endif
+
+
 /* --------------------------------------------------------------------
  *  USB Host (OHCI)
  * -------------------------------------------------------------------- */
@@ -1220,6 +1268,7 @@ void __init at91_add_device_serial(void) {}
  */
 static int __init at91_add_standard_devices(void)
 {
+	at91_add_device_hdmac();
 	at91_add_device_rtc();
 	at91_add_device_rtt();
 	at91_add_device_watchdog();
-- 
cgit v1.2.3


From 378ac65e6c6779c526c9016cafb61d84ff9cbecd Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 18 Sep 2009 16:14:22 +0100
Subject: ARM: 5709/1: at91: add AC97 support to at91sam9g45 series and
 at91sam9m10g45ek board

Add the support of AC97 on the at91sam9g45 chip series and -ek board.
It will share the code with AVR32 ac97c alsa driver "atmel_ac97c".

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/at91sam9g45_devices.c | 55 ++++++++++++++++++++++++++++++++
 arch/arm/mach-at91/board-sam9m10g45ek.c  | 10 ++++++
 2 files changed, 65 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 45720c84f0b..d581cff80c4 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -597,6 +597,61 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 #endif
 
 
+/* --------------------------------------------------------------------
+ *  AC97
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
+static u64 ac97_dmamask = DMA_BIT_MASK(32);
+static struct ac97c_platform_data ac97_data;
+
+static struct resource ac97_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_AC97C,
+		.end	= AT91SAM9G45_BASE_AC97C + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_AC97C,
+		.end	= AT91SAM9G45_ID_AC97C,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_ac97_device = {
+	.name		= "atmel_ac97c",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &ac97_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &ac97_data,
+	},
+	.resource	= ac97_resources,
+	.num_resources	= ARRAY_SIZE(ac97_resources),
+};
+
+void __init at91_add_device_ac97(struct ac97c_platform_data *data)
+{
+	if (!data)
+		return;
+
+	at91_set_A_periph(AT91_PIN_PD8, 0);	/* AC97FS */
+	at91_set_A_periph(AT91_PIN_PD9, 0);	/* AC97CK */
+	at91_set_A_periph(AT91_PIN_PD7, 0);	/* AC97TX */
+	at91_set_A_periph(AT91_PIN_PD6, 0);	/* AC97RX */
+
+	/* reset */
+	if (data->reset_pin)
+		at91_set_gpio_output(data->reset_pin, 0);
+
+	ac97_data = *data;
+	platform_device_register(&at91sam9g45_ac97_device);
+}
+#else
+void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
+#endif
+
+
 /* --------------------------------------------------------------------
  *  LCD Controller
  * -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index b8558eae522..64c3843f323 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -310,6 +310,14 @@ static void __init ek_add_device_buttons(void) {}
 #endif
 
 
+/*
+ * AC97
+ * reset_pin is not connected: NRST
+ */
+static struct ac97c_platform_data ek_ac97_data = {
+};
+
+
 /*
  * LEDs ... these could all be PWM-driven, for variable brightness
  */
@@ -372,6 +380,8 @@ static void __init ek_board_init(void)
 	at91_add_device_lcdc(&ek_lcdc_data);
 	/* Push Buttons */
 	ek_add_device_buttons();
+	/* AC97 */
+	at91_add_device_ac97(&ek_ac97_data);
 	/* LEDs */
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
 	at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
-- 
cgit v1.2.3


From 439a33074c7d0895dd1e13ac354b8b4505d3ea43 Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 18 Sep 2009 16:14:21 +0100
Subject: ARM: 5710/1: at91: add AC97 support to at91sam9rl and at91sam9rlek
 board

Add the support of AC97 on the at91sam9rl chip and -ek board.
It will share the code with AVR32 ac97c alsa driver "atmel_ac97c".

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/at91sam9rl_devices.c | 55 +++++++++++++++++++++++++++++++++
 arch/arm/mach-at91/board-sam9rlek.c     | 10 ++++++
 2 files changed, 65 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 1c2dced8748..d345f5453db 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -443,6 +443,61 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 #endif
 
 
+/* --------------------------------------------------------------------
+ *  AC97
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
+static u64 ac97_dmamask = DMA_BIT_MASK(32);
+static struct ac97c_platform_data ac97_data;
+
+static struct resource ac97_resources[] = {
+	[0] = {
+		.start	= AT91SAM9RL_BASE_AC97C,
+		.end	= AT91SAM9RL_BASE_AC97C + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9RL_ID_AC97C,
+		.end	= AT91SAM9RL_ID_AC97C,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9rl_ac97_device = {
+	.name		= "atmel_ac97c",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &ac97_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &ac97_data,
+	},
+	.resource	= ac97_resources,
+	.num_resources	= ARRAY_SIZE(ac97_resources),
+};
+
+void __init at91_add_device_ac97(struct ac97c_platform_data *data)
+{
+	if (!data)
+		return;
+
+	at91_set_A_periph(AT91_PIN_PD1, 0);	/* AC97FS */
+	at91_set_A_periph(AT91_PIN_PD2, 0);	/* AC97CK */
+	at91_set_A_periph(AT91_PIN_PD3, 0);	/* AC97TX */
+	at91_set_A_periph(AT91_PIN_PD4, 0);	/* AC97RX */
+
+	/* reset */
+	if (data->reset_pin)
+		at91_set_gpio_output(data->reset_pin, 0);
+
+	ac97_data = *data;
+	platform_device_register(&at91sam9rl_ac97_device);
+}
+#else
+void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
+#endif
+
+
 /* --------------------------------------------------------------------
  *  LCD Controller
  * -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 9d07679efce..cde056570a4 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -210,6 +210,14 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data;
 #endif
 
 
+/*
+ * AC97
+ * reset_pin is not connected: NRST
+ */
+static struct ac97c_platform_data ek_ac97_data = {
+};
+
+
 /*
  * LEDs
  */
@@ -299,6 +307,8 @@ static void __init ek_board_init(void)
 	at91_add_device_mmc(0, &ek_mmc_data);
 	/* LCD Controller */
 	at91_add_device_lcdc(&ek_lcdc_data);
+	/* AC97 */
+	at91_add_device_ac97(&ek_ac97_data);
 	/* Touch Screen Controller */
 	at91_add_device_tsadcc();
 	/* LEDs */
-- 
cgit v1.2.3


From 9c5e8fecc4a86adbf363f5cf344c0ccccdbb8982 Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Fri, 18 Sep 2009 20:40:27 +0100
Subject: ARM: 5711/1: locomo.c: CodingStyle cleanups

EXPORT* macros should follow immediately after the closing function
brace line.

The prototype for locomo_chip_driver() is not needed since the static
(inline) function is located earlier in the file.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/common/locomo.c | 17 +++++++----------
 1 file changed, 7 insertions(+), 10 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index 2293f0ce061..bd36c778c81 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -865,6 +865,7 @@ void locomo_gpio_set_dir(struct device *dev, unsigned int bits, unsigned int dir
 
 	spin_unlock_irqrestore(&lchip->lock, flags);
 }
+EXPORT_SYMBOL(locomo_gpio_set_dir);
 
 int locomo_gpio_read_level(struct device *dev, unsigned int bits)
 {
@@ -882,6 +883,7 @@ int locomo_gpio_read_level(struct device *dev, unsigned int bits)
 	ret &= bits;
 	return ret;
 }
+EXPORT_SYMBOL(locomo_gpio_read_level);
 
 int locomo_gpio_read_output(struct device *dev, unsigned int bits)
 {
@@ -899,6 +901,7 @@ int locomo_gpio_read_output(struct device *dev, unsigned int bits)
 	ret &= bits;
 	return ret;
 }
+EXPORT_SYMBOL(locomo_gpio_read_output);
 
 void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set)
 {
@@ -920,6 +923,7 @@ void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set)
 
 	spin_unlock_irqrestore(&lchip->lock, flags);
 }
+EXPORT_SYMBOL(locomo_gpio_write);
 
 static void locomo_m62332_sendbit(void *mapbase, int bit)
 {
@@ -1084,13 +1088,12 @@ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int
 
 	spin_unlock_irqrestore(&lchip->lock, flags);
 }
+EXPORT_SYMBOL(locomo_m62332_senddata);
 
 /*
  *	Frontlight control
  */
 
-static struct locomo *locomo_chip_driver(struct locomo_dev *ldev);
-
 void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf)
 {
 	unsigned long flags;
@@ -1182,11 +1185,13 @@ int locomo_driver_register(struct locomo_driver *driver)
 	driver->drv.bus = &locomo_bus_type;
 	return driver_register(&driver->drv);
 }
+EXPORT_SYMBOL(locomo_driver_register);
 
 void locomo_driver_unregister(struct locomo_driver *driver)
 {
 	driver_unregister(&driver->drv);
 }
+EXPORT_SYMBOL(locomo_driver_unregister);
 
 static int __init locomo_init(void)
 {
@@ -1208,11 +1213,3 @@ module_exit(locomo_exit);
 MODULE_DESCRIPTION("Sharp LoCoMo core driver");
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>");
-
-EXPORT_SYMBOL(locomo_driver_register);
-EXPORT_SYMBOL(locomo_driver_unregister);
-EXPORT_SYMBOL(locomo_gpio_set_dir);
-EXPORT_SYMBOL(locomo_gpio_read_level);
-EXPORT_SYMBOL(locomo_gpio_read_output);
-EXPORT_SYMBOL(locomo_gpio_write);
-EXPORT_SYMBOL(locomo_m62332_senddata);
-- 
cgit v1.2.3


From 2003b7af259611312ea132da1f5006ae0b8e47d7 Mon Sep 17 00:00:00 2001
From: Frederic Riss <frederic.riss@gmail.com>
Date: Mon, 21 Sep 2009 08:43:30 +0100
Subject: ARM: 5715/1: Make kprobes unregistration SMP safe

ARM kprobes use an illegal instruction to trigger kprobes. In the
current implementation, there's a race between the unregistration of a
kprobe and the illegal instruction exception handler if they run at the
same time on different cores.

When reading the value of the undefined instruction, the exception
handler might get the original legal instruction as just patched
concurrently by arch_disarm_kprobe(). When this happen the kprobe
handler won't run, and thus the exception handler will oops because it
believe it just hit an undefined instruction in kernel space.

The following patch synchronizes the code patching in the kprobes
unregistration using stop_machine and thus avoids the above race.

Signed-off-by: Frederic RISS <frederic.riss@gmail.com>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/kprobes.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c
index f692efddd44..60c62c377fa 100644
--- a/arch/arm/kernel/kprobes.c
+++ b/arch/arm/kernel/kprobes.c
@@ -22,6 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/kprobes.h>
 #include <linux/module.h>
+#include <linux/stop_machine.h>
 #include <linux/stringify.h>
 #include <asm/traps.h>
 #include <asm/cacheflush.h>
@@ -83,10 +84,24 @@ void __kprobes arch_arm_kprobe(struct kprobe *p)
 	flush_insns(p->addr, 1);
 }
 
+/*
+ * The actual disarming is done here on each CPU and synchronized using
+ * stop_machine. This synchronization is necessary on SMP to avoid removing
+ * a probe between the moment the 'Undefined Instruction' exception is raised
+ * and the moment the exception handler reads the faulting instruction from
+ * memory.
+ */
+int __kprobes __arch_disarm_kprobe(void *p)
+{
+	struct kprobe *kp = p;
+	*kp->addr = kp->opcode;
+	flush_insns(kp->addr, 1);
+	return 0;
+}
+
 void __kprobes arch_disarm_kprobe(struct kprobe *p)
 {
-	*p->addr = p->opcode;
-	flush_insns(p->addr, 1);
+	stop_machine(__arch_disarm_kprobe, p, &cpu_online_map);
 }
 
 void __kprobes arch_remove_kprobe(struct kprobe *p)
-- 
cgit v1.2.3


From 4321532cec25e1747961d83fb4f78ec24ea92966 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Mon, 21 Sep 2009 12:30:32 +0100
Subject: ARM: 5718/1: Sane busids for RealView board components

This removes the totally bogus bus ID:s with two-digit hex numerals
either referring to the base address of corresponding versatile
machine or just some arbitrarily chosen digit in favor of just using
the device identifier as a string. I kept the "dev:" prefix for
DevChips, "fpga:" prefix for FPGA:s and "issp:" prefix for the
other processor bus, just in case someone likes them.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-realview/core.c            | 18 +++++++--------
 arch/arm/mach-realview/realview_eb.c     | 38 ++++++++++++++++----------------
 arch/arm/mach-realview/realview_pb1176.c | 38 ++++++++++++++++----------------
 arch/arm/mach-realview/realview_pb11mp.c | 38 ++++++++++++++++----------------
 arch/arm/mach-realview/realview_pba8.c   | 38 ++++++++++++++++----------------
 arch/arm/mach-realview/realview_pbx.c    | 38 ++++++++++++++++----------------
 6 files changed, 104 insertions(+), 104 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index dc3519c50ab..5a5e1f72461 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -296,31 +296,31 @@ static struct clk ref24_clk = {
 
 static struct clk_lookup lookups[] = {
 	{	/* UART0 */
-		.dev_id		= "dev:f1",
+		.dev_id		= "dev:uart0",
 		.clk		= &ref24_clk,
 	}, {	/* UART1 */
-		.dev_id		= "dev:f2",
+		.dev_id		= "dev:uart1",
 		.clk		= &ref24_clk,
 	}, {	/* UART2 */
-		.dev_id		= "dev:f3",
+		.dev_id		= "dev:uart2",
 		.clk		= &ref24_clk,
 	}, {	/* UART3 */
-		.dev_id		= "fpga:09",
+		.dev_id		= "fpga:uart3",
 		.clk		= &ref24_clk,
 	}, {	/* KMI0 */
-		.dev_id		= "fpga:06",
+		.dev_id		= "fpga:kmi0",
 		.clk		= &ref24_clk,
 	}, {	/* KMI1 */
-		.dev_id		= "fpga:07",
+		.dev_id		= "fpga:kmi1",
 		.clk		= &ref24_clk,
 	}, {	/* MMC0 */
-		.dev_id		= "fpga:05",
+		.dev_id		= "fpga:mmc0",
 		.clk		= &ref24_clk,
 	}, {	/* EB:CLCD */
-		.dev_id		= "dev:20",
+		.dev_id		= "dev:clcd",
 		.clk		= &oscvco_clk,
 	}, {	/* PB:CLCD */
-		.dev_id		= "issp:20",
+		.dev_id		= "issp:clcd",
 		.clk		= &oscvco_clk,
 	}
 };
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index abd13b44867..c0795ea3b3a 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -193,27 +193,27 @@ static struct pl061_platform_data gpio2_plat_data = {
 #define EB_SSP_DMA	{ 9, 8 }
 
 /* FPGA Primecells */
-AMBA_DEVICE(aaci,  "fpga:04", AACI,     NULL);
-AMBA_DEVICE(mmc0,  "fpga:05", MMCI0,    &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0,  "fpga:06", KMI0,     NULL);
-AMBA_DEVICE(kmi1,  "fpga:07", KMI1,     NULL);
-AMBA_DEVICE(uart3, "fpga:09", EB_UART3, NULL);
+AMBA_DEVICE(aaci,  "fpga:aaci",  AACI,     NULL);
+AMBA_DEVICE(mmc0,  "fpga:mmc0",  MMCI0,    &realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0,  "fpga:kmi0",  KMI0,     NULL);
+AMBA_DEVICE(kmi1,  "fpga:kmi1",  KMI1,     NULL);
+AMBA_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,   "dev:00",  EB_SMC,   NULL);
-AMBA_DEVICE(clcd,  "dev:20",  EB_CLCD,  &clcd_plat_data);
-AMBA_DEVICE(dmac,  "dev:30",  DMAC,     NULL);
-AMBA_DEVICE(sctl,  "dev:e0",  SCTL,     NULL);
-AMBA_DEVICE(wdog,  "dev:e1",  EB_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4",  EB_GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:e5",  GPIO1,    &gpio1_plat_data);
-AMBA_DEVICE(gpio2, "dev:e6",  GPIO2,    &gpio2_plat_data);
-AMBA_DEVICE(rtc,   "dev:e8",  EB_RTC,   NULL);
-AMBA_DEVICE(sci0,  "dev:f0",  SCI,      NULL);
-AMBA_DEVICE(uart0, "dev:f1",  EB_UART0, NULL);
-AMBA_DEVICE(uart1, "dev:f2",  EB_UART1, NULL);
-AMBA_DEVICE(uart2, "dev:f3",  EB_UART2, NULL);
-AMBA_DEVICE(ssp0,  "dev:f4",  EB_SSP,   NULL);
+AMBA_DEVICE(smc,   "dev:smc",   EB_SMC,   NULL);
+AMBA_DEVICE(clcd,  "dev:clcd",  EB_CLCD,  &clcd_plat_data);
+AMBA_DEVICE(dmac,  "dev:dmac",  DMAC,     NULL);
+AMBA_DEVICE(sctl,  "dev:sctl",  SCTL,     NULL);
+AMBA_DEVICE(wdog,  "dev:wdog",  EB_WATCHDOG, NULL);
+AMBA_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1,    &gpio1_plat_data);
+AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2,    &gpio2_plat_data);
+AMBA_DEVICE(rtc,   "dev:rtc",   EB_RTC,   NULL);
+AMBA_DEVICE(sci0,  "dev:sci0",  SCI,      NULL);
+AMBA_DEVICE(uart0, "dev:uart0", EB_UART0, NULL);
+AMBA_DEVICE(uart1, "dev:uart1", EB_UART1, NULL);
+AMBA_DEVICE(uart2, "dev:uart2", EB_UART2, NULL);
+AMBA_DEVICE(ssp0,  "dev:ssp0",  EB_SSP,   NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&dmac_device,
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 17fbb0e889b..395dc18070b 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -170,29 +170,29 @@ static struct pl061_platform_data gpio2_plat_data = {
 #define PB1176_SSP_DMA		{ 9, 8 }
 
 /* FPGA Primecells */
-AMBA_DEVICE(aaci,	"fpga:04",	AACI,		NULL);
-AMBA_DEVICE(mmc0,	"fpga:05",	MMCI0,		&realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0,	"fpga:06",	KMI0,		NULL);
-AMBA_DEVICE(kmi1,	"fpga:07",	KMI1,		NULL);
-AMBA_DEVICE(uart3,	"fpga:09",	PB1176_UART3,	NULL);
+AMBA_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
+AMBA_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
+AMBA_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
+AMBA_DEVICE(uart3,	"fpga:uart3",	PB1176_UART3,	NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,	"dev:00",	PB1176_SMC,	NULL);
-AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
-AMBA_DEVICE(wdog,	"dev:e1",	PB1176_WATCHDOG,	NULL);
-AMBA_DEVICE(gpio0,	"dev:e4",	PB1176_GPIO0,	&gpio0_plat_data);
-AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		&gpio1_plat_data);
-AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		&gpio2_plat_data);
-AMBA_DEVICE(rtc,	"dev:e8",	PB1176_RTC,	NULL);
-AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
-AMBA_DEVICE(uart0,	"dev:f1",	PB1176_UART0,	NULL);
-AMBA_DEVICE(uart1,	"dev:f2",	PB1176_UART1,	NULL);
-AMBA_DEVICE(uart2,	"dev:f3",	PB1176_UART2,	NULL);
-AMBA_DEVICE(ssp0,	"dev:f4",	PB1176_SSP,	NULL);
+AMBA_DEVICE(smc,	"dev:smc",	PB1176_SMC,	NULL);
+AMBA_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
+AMBA_DEVICE(wdog,	"dev:wdog",	PB1176_WATCHDOG,	NULL);
+AMBA_DEVICE(gpio0,	"dev:gpio0",	PB1176_GPIO0,	&gpio0_plat_data);
+AMBA_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
+AMBA_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
+AMBA_DEVICE(rtc,	"dev:rtc",	PB1176_RTC,	NULL);
+AMBA_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
+AMBA_DEVICE(uart0,	"dev:uart0",	PB1176_UART0,	NULL);
+AMBA_DEVICE(uart1,	"dev:uart1",	PB1176_UART1,	NULL);
+AMBA_DEVICE(uart2,	"dev:uart2",	PB1176_UART2,	NULL);
+AMBA_DEVICE(ssp0,	"dev:ssp0",	PB1176_SSP,	NULL);
 
 /* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd,	"issp:20",	PB1176_CLCD,	&clcd_plat_data);
-//AMBA_DEVICE(dmac,	"issp:30",	PB1176_DMAC,	NULL);
+AMBA_DEVICE(clcd,	"issp:clcd",	PB1176_CLCD,	&clcd_plat_data);
+//AMBA_DEVICE(dmac,	"issp:dmac",	PB1176_DMAC,	NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
 //	&dmac_device,
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index fdd042b85f4..c0c9e35e6e3 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -172,29 +172,29 @@ static struct pl061_platform_data gpio2_plat_data = {
 #define PB11MP_SSP_DMA		{ 9, 8 }
 
 /* FPGA Primecells */
-AMBA_DEVICE(aaci,	"fpga:04",	AACI,		NULL);
-AMBA_DEVICE(mmc0,	"fpga:05",	MMCI0,		&realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0,	"fpga:06",	KMI0,		NULL);
-AMBA_DEVICE(kmi1,	"fpga:07",	KMI1,		NULL);
-AMBA_DEVICE(uart3,	"fpga:09",	PB11MP_UART3,	NULL);
+AMBA_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
+AMBA_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
+AMBA_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
+AMBA_DEVICE(uart3,	"fpga:uart3",	PB11MP_UART3,	NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,	"dev:00",	PB11MP_SMC,	NULL);
-AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
-AMBA_DEVICE(wdog,	"dev:e1",	PB11MP_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0,	"dev:e4",	PB11MP_GPIO0,	&gpio0_plat_data);
-AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		&gpio1_plat_data);
-AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		&gpio2_plat_data);
-AMBA_DEVICE(rtc,	"dev:e8",	PB11MP_RTC,	NULL);
-AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
-AMBA_DEVICE(uart0,	"dev:f1",	PB11MP_UART0,	NULL);
-AMBA_DEVICE(uart1,	"dev:f2",	PB11MP_UART1,	NULL);
-AMBA_DEVICE(uart2,	"dev:f3",	PB11MP_UART2,	NULL);
-AMBA_DEVICE(ssp0,	"dev:f4",	PB11MP_SSP,	NULL);
+AMBA_DEVICE(smc,	"dev:smc",	PB11MP_SMC,	NULL);
+AMBA_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
+AMBA_DEVICE(wdog,	"dev:wdog",	PB11MP_WATCHDOG, NULL);
+AMBA_DEVICE(gpio0,	"dev:gpio0",	PB11MP_GPIO0,	&gpio0_plat_data);
+AMBA_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
+AMBA_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
+AMBA_DEVICE(rtc,	"dev:rtc",	PB11MP_RTC,	NULL);
+AMBA_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
+AMBA_DEVICE(uart0,	"dev:uart0",	PB11MP_UART0,	NULL);
+AMBA_DEVICE(uart1,	"dev:uart1",	PB11MP_UART1,	NULL);
+AMBA_DEVICE(uart2,	"dev:uart2",	PB11MP_UART2,	NULL);
+AMBA_DEVICE(ssp0,	"dev:ssp0",	PB11MP_SSP,	NULL);
 
 /* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd,	"issp:20",	PB11MP_CLCD,	&clcd_plat_data);
-AMBA_DEVICE(dmac,	"issp:30",	DMAC,		NULL);
+AMBA_DEVICE(clcd,	"issp:clcd",	PB11MP_CLCD,	&clcd_plat_data);
+AMBA_DEVICE(dmac,	"issp:dmac",	DMAC,		NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&dmac_device,
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 70bba9900d9..4fc64e146c3 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -162,29 +162,29 @@ static struct pl061_platform_data gpio2_plat_data = {
 #define PBA8_SSP_DMA		{ 9, 8 }
 
 /* FPGA Primecells */
-AMBA_DEVICE(aaci,	"fpga:04",	AACI,		NULL);
-AMBA_DEVICE(mmc0,	"fpga:05",	MMCI0,		&realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0,	"fpga:06",	KMI0,		NULL);
-AMBA_DEVICE(kmi1,	"fpga:07",	KMI1,		NULL);
-AMBA_DEVICE(uart3,	"fpga:09",	PBA8_UART3,	NULL);
+AMBA_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
+AMBA_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
+AMBA_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
+AMBA_DEVICE(uart3,	"fpga:uart3",	PBA8_UART3,	NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,	"dev:00",	PBA8_SMC,	NULL);
-AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
-AMBA_DEVICE(wdog,	"dev:e1",	PBA8_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0,	"dev:e4",	PBA8_GPIO0,	&gpio0_plat_data);
-AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		&gpio1_plat_data);
-AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		&gpio2_plat_data);
-AMBA_DEVICE(rtc,	"dev:e8",	PBA8_RTC,	NULL);
-AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
-AMBA_DEVICE(uart0,	"dev:f1",	PBA8_UART0,	NULL);
-AMBA_DEVICE(uart1,	"dev:f2",	PBA8_UART1,	NULL);
-AMBA_DEVICE(uart2,	"dev:f3",	PBA8_UART2,	NULL);
-AMBA_DEVICE(ssp0,	"dev:f4",	PBA8_SSP,	NULL);
+AMBA_DEVICE(smc,	"dev:smc",	PBA8_SMC,	NULL);
+AMBA_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
+AMBA_DEVICE(wdog,	"dev:wdog",	PBA8_WATCHDOG, NULL);
+AMBA_DEVICE(gpio0,	"dev:gpio0",	PBA8_GPIO0,	&gpio0_plat_data);
+AMBA_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
+AMBA_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
+AMBA_DEVICE(rtc,	"dev:rtc",	PBA8_RTC,	NULL);
+AMBA_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
+AMBA_DEVICE(uart0,	"dev:uart0",	PBA8_UART0,	NULL);
+AMBA_DEVICE(uart1,	"dev:uart1",	PBA8_UART1,	NULL);
+AMBA_DEVICE(uart2,	"dev:uart2",	PBA8_UART2,	NULL);
+AMBA_DEVICE(ssp0,	"dev:ssp0",	PBA8_SSP,	NULL);
 
 /* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd,	"issp:20",	PBA8_CLCD,	&clcd_plat_data);
-AMBA_DEVICE(dmac,	"issp:30",	DMAC,		NULL);
+AMBA_DEVICE(clcd,	"issp:clcd",	PBA8_CLCD,	&clcd_plat_data);
+AMBA_DEVICE(dmac,	"issp:dmac",	DMAC,		NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&dmac_device,
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index ce6c5d25fbe..cf68b542606 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -182,29 +182,29 @@ static struct pl061_platform_data gpio2_plat_data = {
 #define PBX_SSP_DMA		{ 9, 8 }
 
 /* FPGA Primecells */
-AMBA_DEVICE(aaci,	"fpga:04",	AACI,		NULL);
-AMBA_DEVICE(mmc0,	"fpga:05",	MMCI0,		&realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0,	"fpga:06",	KMI0,		NULL);
-AMBA_DEVICE(kmi1,	"fpga:07",	KMI1,		NULL);
-AMBA_DEVICE(uart3,	"fpga:09",	PBX_UART3,	NULL);
+AMBA_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
+AMBA_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
+AMBA_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
+AMBA_DEVICE(uart3,	"fpga:uart3",	PBX_UART3,	NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,	"dev:00",	PBX_SMC,	NULL);
-AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
-AMBA_DEVICE(wdog,	"dev:e1",	PBX_WATCHDOG, 	NULL);
-AMBA_DEVICE(gpio0,	"dev:e4",	PBX_GPIO0,	&gpio0_plat_data);
-AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		&gpio1_plat_data);
-AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		&gpio2_plat_data);
-AMBA_DEVICE(rtc,	"dev:e8",	PBX_RTC,	NULL);
-AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
-AMBA_DEVICE(uart0,	"dev:f1",	PBX_UART0,	NULL);
-AMBA_DEVICE(uart1,	"dev:f2",	PBX_UART1,	NULL);
-AMBA_DEVICE(uart2,	"dev:f3",	PBX_UART2,	NULL);
-AMBA_DEVICE(ssp0,	"dev:f4",	PBX_SSP,	NULL);
+AMBA_DEVICE(smc,	"dev:smc",	PBX_SMC,	NULL);
+AMBA_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
+AMBA_DEVICE(wdog,	"dev:wdog",	PBX_WATCHDOG, 	NULL);
+AMBA_DEVICE(gpio0,	"dev:gpio0",	PBX_GPIO0,	&gpio0_plat_data);
+AMBA_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
+AMBA_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
+AMBA_DEVICE(rtc,	"dev:rtc",	PBX_RTC,	NULL);
+AMBA_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
+AMBA_DEVICE(uart0,	"dev:uart0",	PBX_UART0,	NULL);
+AMBA_DEVICE(uart1,	"dev:uart1",	PBX_UART1,	NULL);
+AMBA_DEVICE(uart2,	"dev:uart2",	PBX_UART2,	NULL);
+AMBA_DEVICE(ssp0,	"dev:ssp0",	PBX_SSP,	NULL);
 
 /* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd,	"issp:20",	PBX_CLCD,	&clcd_plat_data);
-AMBA_DEVICE(dmac,	"issp:30",	DMAC,		NULL);
+AMBA_DEVICE(clcd,	"issp:clcd",	PBX_CLCD,	&clcd_plat_data);
+AMBA_DEVICE(dmac,	"issp:dmac",	DMAC,		NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&dmac_device,
-- 
cgit v1.2.3


From ceb69a899f0819bce825083bd487c6afacc0d1b4 Mon Sep 17 00:00:00 2001
From: Mikael Pettersson <mikpe@it.uu.se>
Date: Fri, 11 Sep 2009 00:59:07 +0200
Subject: ixp4xx: timer and clocks cleanups
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This patch does a few simple cleanups of the ixp4xx timer
and clocksource/clockevent code in mach-ixp4xx/common.c:

- ixp4xx_clocksource_init() is static and always returns 0,
  which is ignored by its only caller: make it return void
- ixp4xx_clockevent_init(): ditto
- ixp4xx_get_cycles() is only referenced locally: make it static
- use the ixp4xx_timer_irq.dev_id field to pass &clockevent_ixp4xx
  to ixp4xx_timer_interrupt() via its dev_id parameter, allowing
  the code in ixp4xx_timer_interrupt() to be smaller and faster

Tested on an ixp420 machine (ds101).

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
---
 arch/arm/mach-ixp4xx/common.c | 16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 5083f03e9b5..cfd52fb341c 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -41,8 +41,8 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
-static int __init ixp4xx_clocksource_init(void);
-static int __init ixp4xx_clockevent_init(void);
+static void __init ixp4xx_clocksource_init(void);
+static void __init ixp4xx_clockevent_init(void);
 static struct clock_event_device clockevent_ixp4xx;
 
 /*************************************************************************
@@ -267,7 +267,7 @@ void __init ixp4xx_init_irq(void)
 
 static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id)
 {
-	struct clock_event_device *evt = &clockevent_ixp4xx;
+	struct clock_event_device *evt = dev_id;
 
 	/* Clear Pending Interrupt by writing '1' to it */
 	*IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
@@ -281,6 +281,7 @@ static struct irqaction ixp4xx_timer_irq = {
 	.name		= "timer1",
 	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= ixp4xx_timer_interrupt,
+	.dev_id		= &clockevent_ixp4xx,
 };
 
 void __init ixp4xx_timer_init(void)
@@ -401,7 +402,7 @@ void __init ixp4xx_sys_init(void)
 /*
  * clocksource
  */
-cycle_t ixp4xx_get_cycles(struct clocksource *cs)
+static cycle_t ixp4xx_get_cycles(struct clocksource *cs)
 {
 	return *IXP4XX_OSTS;
 }
@@ -417,14 +418,12 @@ static struct clocksource clocksource_ixp4xx = {
 
 unsigned long ixp4xx_timer_freq = FREQ;
 EXPORT_SYMBOL(ixp4xx_timer_freq);
-static int __init ixp4xx_clocksource_init(void)
+static void __init ixp4xx_clocksource_init(void)
 {
 	clocksource_ixp4xx.mult =
 		clocksource_hz2mult(ixp4xx_timer_freq,
 				    clocksource_ixp4xx.shift);
 	clocksource_register(&clocksource_ixp4xx);
-
-	return 0;
 }
 
 /*
@@ -480,7 +479,7 @@ static struct clock_event_device clockevent_ixp4xx = {
 	.set_next_event	= ixp4xx_set_next_event,
 };
 
-static int __init ixp4xx_clockevent_init(void)
+static void __init ixp4xx_clockevent_init(void)
 {
 	clockevent_ixp4xx.mult = div_sc(FREQ, NSEC_PER_SEC,
 					clockevent_ixp4xx.shift);
@@ -491,5 +490,4 @@ static int __init ixp4xx_clockevent_init(void)
 	clockevent_ixp4xx.cpumask = cpumask_of(0);
 
 	clockevents_register_device(&clockevent_ixp4xx);
-	return 0;
 }
-- 
cgit v1.2.3


From 74c32e7234afc4586391c0c0f290d266a3e57fe5 Mon Sep 17 00:00:00 2001
From: Mikael Pettersson <mikpe@it.uu.se>
Date: Fri, 11 Sep 2009 00:56:54 +0200
Subject: ixp4xx: arch_idle() documentation fixup
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The body of the mach-ixp4xx arch_idle() is mysteriously
disabled by an #if 0 .. #endif. Normally one would expect
to find a call to cpu_do_idle() there, but that call is
disabled, even though cpu_do_idle() is implemented for
XScale cores (and ixp4xx is one).

The explanation can be found in the ixp42x developer's manual
which states that the XScale core clock and power management
registers aren't implemented on ixp42x [3.5.2.2].

Also, the disabled code has suffered from bit rot:
- it checks hlt_counter which is obsolete, as that variable
  and all related code now is private to kernel/process.c
- it passes too many parameters to cpu_do_idle()

So this patch:
- adds a comment before the #if 0 to explain why
  cpu_do_idle() mustn't be called on ixp4xx
- removes the obsolete test of hlt_counter and the
  obsolete parameter to cpu_do_idle()

This is purely a documentation fixup and changes no
generated code. Even so, it has been tested on an
ixp420 machine (ds101).

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
---
 arch/arm/mach-ixp4xx/include/mach/system.h | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-ixp4xx/include/mach/system.h b/arch/arm/mach-ixp4xx/include/mach/system.h
index d2aa26f5acd..54c0af7fa2d 100644
--- a/arch/arm/mach-ixp4xx/include/mach/system.h
+++ b/arch/arm/mach-ixp4xx/include/mach/system.h
@@ -13,9 +13,11 @@
 
 static inline void arch_idle(void)
 {
+	/* ixp4xx does not implement the XScale PWRMODE register,
+	 * so it must not call cpu_do_idle() here.
+	 */
 #if 0
-	if (!hlt_counter)
-		cpu_do_idle(0);
+	cpu_do_idle();
 #endif
 }
 
-- 
cgit v1.2.3


From cc013a88906bad9d2832d6316de1c7dbc1c2a794 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Date: Mon, 21 Sep 2009 17:02:36 -0700
Subject: arches: drop superfluous casts in nr_free_pages() callers

Commit 96177299416dbccb73b54e6b344260154a445375 ("Drop free_pages()")
modified nr_free_pages() to return 'unsigned long' instead of 'unsigned
int'.  This made the casts to 'unsigned long' in most callers superfluous,
so remove them.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Howells <dhowells@redhat.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Chris Zankel <zankel@tensilica.com>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/mm/init.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index ea36186f32c..f982606d7bf 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -596,8 +596,8 @@ void __init mem_init(void)
 
 	printk(KERN_NOTICE "Memory: %luKB available (%dK code, "
 		"%dK data, %dK init, %luK highmem)\n",
-		(unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
-		codesize >> 10, datasize >> 10, initsize >> 10,
+		nr_free_pages() << (PAGE_SHIFT-10), codesize >> 10,
+		datasize >> 10, initsize >> 10,
 		(unsigned long) (totalhigh_pages << (PAGE_SHIFT-10)));
 
 	if (PAGE_SIZE >= 16384 && num_physpages <= 128) {
-- 
cgit v1.2.3


From 90f72aa58bbf076b68e289fbd71eb829bc505923 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Mon, 21 Sep 2009 17:03:45 -0700
Subject: mm: add MAP_HUGETLB for mmaping pseudo-anonymous huge page regions

Add a flag for mmap that will be used to request a huge page region that
will look like anonymous memory to user space.  This is accomplished by
using a file on the internal vfsmount.  MAP_HUGETLB is a modifier of
MAP_ANONYMOUS and so must be specified with it.  The region will behave
the same as a MAP_ANONYMOUS region using small pages.

The patch also adds the MAP_STACK flag, which was previously defined only
on some architectures but not on others.  Since MAP_STACK is meant to be a
hint only, architectures can define it without assigning a specific
meaning to it.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Eric B Munson <ebmunson@us.ibm.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: David Rientjes <rientjes@google.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/include/asm/mman.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/mman.h b/arch/arm/include/asm/mman.h
index fc26976d8e3..6464d471bc7 100644
--- a/arch/arm/include/asm/mman.h
+++ b/arch/arm/include/asm/mman.h
@@ -10,6 +10,8 @@
 #define MAP_NORESERVE	0x4000		/* don't check for reservations */
 #define MAP_POPULATE	0x8000		/* populate (prefault) page tables */
 #define MAP_NONBLOCK	0x10000		/* do not block on IO */
+#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
+#define MAP_HUGETLB	0x40000		/* create a huge page mapping */
 
 #define MCL_CURRENT	1		/* lock all current mappings */
 #define MCL_FUTURE	2		/* lock all future mappings */
-- 
cgit v1.2.3


From 6e17b17f1fc7b2f24383a693d63550d9e1460081 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Mon, 21 Sep 2009 17:03:48 -0700
Subject: mm: remove duplicate asm/mman.h files

A number of architectures have identical asm/mman.h files so they can all
be merged by using the new generic file.

The remaining asm/mman.h files are substantially different from each
other.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/include/asm/mman.h | 20 +-------------------
 1 file changed, 1 insertion(+), 19 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/mman.h b/arch/arm/include/asm/mman.h
index 6464d471bc7..8eebf89f5ab 100644
--- a/arch/arm/include/asm/mman.h
+++ b/arch/arm/include/asm/mman.h
@@ -1,19 +1 @@
-#ifndef __ARM_MMAN_H__
-#define __ARM_MMAN_H__
-
-#include <asm-generic/mman-common.h>
-
-#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
-#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
-#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
-#define MAP_LOCKED	0x2000		/* pages are locked */
-#define MAP_NORESERVE	0x4000		/* don't check for reservations */
-#define MAP_POPULATE	0x8000		/* populate (prefault) page tables */
-#define MAP_NONBLOCK	0x10000		/* do not block on IO */
-#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
-#define MAP_HUGETLB	0x40000		/* create a huge page mapping */
-
-#define MCL_CURRENT	1		/* lock all current mappings */
-#define MCL_FUTURE	2		/* lock all future mappings */
-
-#endif /* __ARM_MMAN_H__ */
+#include <asm-generic/mman.h>
-- 
cgit v1.2.3


From 6ef297f86b62f187c59475784208f75c2ed8ccd8 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Tue, 22 Sep 2009 14:29:36 +0100
Subject: ARM: 5720/1: Move MMCI header to amba include dir

This moves the mmci platform data definition struct away from
arch/arm/include/asm/mach/mmc.h into the more proper place among
the other primecells in include/linux/amba/mmci.h and at the same
time renames it to "mmci.h", and also the struct in this file
confusingly named mmc_platform_data has been renamed
mmci_platform_data for clarity.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/mach/mmc.h          | 18 ------------------
 arch/arm/mach-integrator/integrator_cp.c |  4 ++--
 arch/arm/mach-realview/core.c            |  6 +++---
 arch/arm/mach-realview/core.h            |  4 ++--
 arch/arm/mach-realview/realview_eb.c     |  2 +-
 arch/arm/mach-realview/realview_pb1176.c |  2 +-
 arch/arm/mach-realview/realview_pb11mp.c |  2 +-
 arch/arm/mach-realview/realview_pba8.c   |  2 +-
 arch/arm/mach-realview/realview_pbx.c    |  2 +-
 arch/arm/mach-u300/mmc.c                 |  4 ++--
 arch/arm/mach-versatile/core.c           |  4 ++--
 arch/arm/mach-versatile/versatile_pb.c   |  4 ++--
 12 files changed, 18 insertions(+), 36 deletions(-)
 delete mode 100644 arch/arm/include/asm/mach/mmc.h

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/mach/mmc.h b/arch/arm/include/asm/mach/mmc.h
deleted file mode 100644
index 27bec555ee1..00000000000
--- a/arch/arm/include/asm/mach/mmc.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- *  arch/arm/include/asm/mach/mmc.h
- */
-#ifndef ASMARM_MACH_MMC_H
-#define ASMARM_MACH_MMC_H
-
-#include <linux/mmc/host.h>
-
-struct mmc_platform_data {
-	unsigned int ocr_mask;			/* available voltages */
-	u32 (*translate_vdd)(struct device *, unsigned int);
-	unsigned int (*status)(struct device *);
-	int	gpio_wp;
-	int	gpio_cd;
-	unsigned long capabilities;
-};
-
-#endif
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 2a318eba1b0..3f35293d457 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -19,6 +19,7 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/kmi.h>
 #include <linux/amba/clcd.h>
+#include <linux/amba/mmci.h>
 #include <linux/io.h>
 
 #include <asm/clkdev.h>
@@ -35,7 +36,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/irq.h>
-#include <asm/mach/mmc.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
@@ -400,7 +400,7 @@ static unsigned int mmc_status(struct device *dev)
 	return status & 8;
 }
 
-static struct mmc_platform_data mmc_data = {
+static struct mmci_platform_data mmc_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= mmc_status,
 	.gpio_wp	= -1,
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 5a5e1f72461..a2083b60e3f 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -30,6 +30,7 @@
 #include <linux/io.h>
 #include <linux/smsc911x.h>
 #include <linux/ata_platform.h>
+#include <linux/amba/mmci.h>
 
 #include <asm/clkdev.h>
 #include <asm/system.h>
@@ -44,7 +45,6 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
 
 #include <asm/hardware/gic.h>
 
@@ -237,14 +237,14 @@ static unsigned int realview_mmc_status(struct device *dev)
 	return readl(REALVIEW_SYSMCI) & mask;
 }
 
-struct mmc_platform_data realview_mmc0_plat_data = {
+struct mmci_platform_data realview_mmc0_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= realview_mmc_status,
 	.gpio_wp	= 17,
 	.gpio_cd	= 16,
 };
 
-struct mmc_platform_data realview_mmc1_plat_data = {
+struct mmci_platform_data realview_mmc1_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= realview_mmc_status,
 	.gpio_wp	= 19,
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 59a337ba4be..46cd6acb4d4 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -47,8 +47,8 @@ static struct amba_device name##_device = {			\
 extern struct platform_device realview_flash_device;
 extern struct platform_device realview_cf_device;
 extern struct platform_device realview_i2c_device;
-extern struct mmc_platform_data realview_mmc0_plat_data;
-extern struct mmc_platform_data realview_mmc1_plat_data;
+extern struct mmci_platform_data realview_mmc0_plat_data;
+extern struct mmci_platform_data realview_mmc1_plat_data;
 extern struct clcd_board clcd_plat_data;
 extern void __iomem *gic_cpu_base_addr;
 extern void __iomem *timer0_va_base;
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index c0795ea3b3a..1d65e64ae57 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -24,6 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -37,7 +38,6 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
 #include <asm/mach/time.h>
 
 #include <mach/board-eb.h>
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 395dc18070b..2817fe09931 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -24,6 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -37,7 +38,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
 #include <asm/mach/time.h>
 
 #include <mach/board-pb1176.h>
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index c0c9e35e6e3..94680fcf726 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -24,6 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -38,7 +39,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
 #include <asm/mach/time.h>
 
 #include <mach/board-pb11mp.h>
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 4fc64e146c3..941beb2b970 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -24,6 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
 #include <linux/io.h>
 
 #include <asm/irq.h>
@@ -34,7 +35,6 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
 #include <asm/mach/time.h>
 
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index cf68b542606..7e4bc6cdca5 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -23,6 +23,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
 #include <linux/io.h>
 
 #include <asm/irq.h>
@@ -34,7 +35,6 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
 #include <asm/mach/time.h>
 
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
index 82af247760e..7b6b016786b 100644
--- a/arch/arm/mach-u300/mmc.c
+++ b/arch/arm/mach-u300/mmc.c
@@ -19,8 +19,8 @@
 #include <linux/regulator/consumer.h>
 #include <linux/regulator/machine.h>
 #include <linux/gpio.h>
+#include <linux/amba/mmci.h>
 
-#include <asm/mach/mmc.h>
 #include "mmc.h"
 #include "padmux.h"
 
@@ -28,7 +28,7 @@ struct mmci_card_event {
 	struct input_dev *mmc_input;
 	int mmc_inserted;
 	struct work_struct workq;
-	struct mmc_platform_data mmc0_plat_data;
+	struct mmci_platform_data mmc0_plat_data;
 };
 
 static unsigned int mmc_status(struct device *dev)
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 975eae41ee6..e13be7c444c 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -27,6 +27,7 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 #include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 #include <linux/cnt32_to_63.h>
@@ -47,7 +48,6 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
 
 #include "core.h"
 #include "clock.h"
@@ -369,7 +369,7 @@ unsigned int mmc_status(struct device *dev)
 	return readl(VERSATILE_SYSMCI) & mask;
 }
 
-static struct mmc_platform_data mmc0_plat_data = {
+static struct mmci_platform_data mmc0_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= mmc_status,
 	.gpio_wp	= -1,
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index 9af8d8154df..239cd30fc4f 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -24,6 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -31,7 +32,6 @@
 #include <asm/mach-types.h>
 
 #include <asm/mach/arch.h>
-#include <asm/mach/mmc.h>
 
 #include "core.h"
 
@@ -41,7 +41,7 @@
 #define IRQ_MMCI1A	IRQ_SIC_MMCI1A
 #endif
 
-static struct mmc_platform_data mmc1_plat_data = {
+static struct mmci_platform_data mmc1_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= mmc_status,
 	.gpio_wp	= -1,
-- 
cgit v1.2.3


From 9173a8ef24a6b1b8031507b35b8ffe5f85a87692 Mon Sep 17 00:00:00 2001
From: Andrew Victor <linux@maxim.org.za>
Date: Tue, 22 Sep 2009 10:47:50 +0100
Subject: ARM: 5719/1: [AT91] Fix AC97 breakage

Fix AC97 build breakage with converting to the shared AT91/AVR32 AC97 driver:
  struct atmel_ac97_data  -> struct ac97c_platform_data
  CONFIG_SND_AT91_AC97 -> CONFIG_SND_ATMEL_AC97C

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/at91cap9_devices.c | 10 +++++-----
 arch/arm/mach-at91/board-cap9adk.c    |  2 +-
 arch/arm/mach-at91/board-neocore926.c |  2 +-
 3 files changed, 7 insertions(+), 7 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index 412aa49ad2f..d1f775e8635 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -771,9 +771,9 @@ void __init at91_add_device_pwm(u32 mask) {}
  *  AC97
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE)
+#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
 static u64 ac97_dmamask = DMA_BIT_MASK(32);
-static struct atmel_ac97_data ac97_data;
+static struct ac97c_platform_data ac97_data;
 
 static struct resource ac97_resources[] = {
 	[0] = {
@@ -789,7 +789,7 @@ static struct resource ac97_resources[] = {
 };
 
 static struct platform_device at91cap9_ac97_device = {
-	.name		= "ac97c",
+	.name		= "atmel_ac97c",
 	.id		= 1,
 	.dev		= {
 				.dma_mask		= &ac97_dmamask,
@@ -800,7 +800,7 @@ static struct platform_device at91cap9_ac97_device = {
 	.num_resources	= ARRAY_SIZE(ac97_resources),
 };
 
-void __init at91_add_device_ac97(struct atmel_ac97_data *data)
+void __init at91_add_device_ac97(struct ac97c_platform_data *data)
 {
 	if (!data)
 		return;
@@ -818,7 +818,7 @@ void __init at91_add_device_ac97(struct atmel_ac97_data *data)
 	platform_device_register(&at91cap9_ac97_device);
 }
 #else
-void __init at91_add_device_ac97(struct atmel_ac97_data *data) {}
+void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index 83a1a0fef47..d6940870e40 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -364,7 +364,7 @@ static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data;
 /*
  * AC97
  */
-static struct atmel_ac97_data cap9adk_ac97_data = {
+static struct ac97c_platform_data cap9adk_ac97_data = {
 //	.reset_pin	= ... not connected
 };
 
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index 9ba7ba2cc3b..f78a55e5ad0 100644
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -340,7 +340,7 @@ static void __init neocore926_add_device_buttons(void) {}
 /*
  * AC97
  */
-static struct atmel_ac97_data neocore926_ac97_data = {
+static struct ac97c_platform_data neocore926_ac97_data = {
 	.reset_pin	= AT91_PIN_PA13,
 };
 
-- 
cgit v1.2.3


From 58a587dc2abd436a6a8d0de729d9ed7e40ce0ac9 Mon Sep 17 00:00:00 2001
From: Marc Kleine-Budde <mkl@pengutronix.de>
Date: Wed, 16 Sep 2009 23:37:32 +0000
Subject: at91sam9263: add at91_can device to generic device definition

This patch adds the device definition for the at91_can device to
the generic device definiton file for the at91sam9263.

Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/arm/mach-at91/at91sam9263_devices.c | 36 ++++++++++++++++++++++++++++++++
 arch/arm/mach-at91/include/mach/board.h  |  6 ++++++
 2 files changed, 42 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index b7f23324231..6026c2e0d5c 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -757,6 +757,42 @@ void __init at91_add_device_ac97(struct atmel_ac97_data *data)
 void __init at91_add_device_ac97(struct atmel_ac97_data *data) {}
 #endif
 
+/* --------------------------------------------------------------------
+ *  CAN Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_CAN_AT91) || defined(CONFIG_CAN_AT91_MODULE)
+static struct resource can_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_CAN,
+		.end	= AT91SAM9263_BASE_CAN + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_CAN,
+		.end	= AT91SAM9263_ID_CAN,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9263_can_device = {
+	.name		= "at91_can",
+	.id		= -1,
+	.resource	= can_resources,
+	.num_resources	= ARRAY_SIZE(can_resources),
+};
+
+void __init at91_add_device_can(struct at91_can_data *data)
+{
+	at91_set_A_periph(AT91_PIN_PA13, 0);	/* CANTX */
+	at91_set_A_periph(AT91_PIN_PA14, 0);	/* CANRX */
+	at91sam9263_can_device.dev.platform_data = data;
+
+	platform_device_register(&at91sam9263_can_device);
+}
+#else
+void __init at91_add_device_can(struct at91_can_data *data) {}
+#endif
 
 /* --------------------------------------------------------------------
  *  LCD Controller
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index e6afff849b8..134731cd9fd 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -179,6 +179,12 @@ extern void __init at91_add_device_isi(void);
  /* Touchscreen Controller */
 extern void __init at91_add_device_tsadcc(void);
 
+/* CAN */
+struct at91_can_data {
+	void (*transceiver_switch)(int on);
+};
+extern void __init at91_add_device_can(struct at91_can_data *data);
+
  /* LEDs */
 extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
 extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
-- 
cgit v1.2.3


From a7a1a05f9dc0308b1710c5a9545bb98ca250bb8d Mon Sep 17 00:00:00 2001
From: Marc Kleine-Budde <mkl@pengutronix.de>
Date: Wed, 16 Sep 2009 23:37:33 +0000
Subject: at91sam9263ek: activate at91 CAN controller

This patch activates the at91 CAN controller for the at91sam9263ek
development board.

Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/arm/mach-at91/board-sam9263ek.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 57d52528f22..e6268b3cbe8 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -400,6 +400,23 @@ static struct gpio_led ek_pwm_led[] = {
 	}
 };
 
+/*
+ * CAN
+ */
+static void sam9263ek_transceiver_switch(int on)
+{
+	if (on) {
+		at91_set_gpio_output(AT91_PIN_PA18, 1); /* CANRXEN */
+		at91_set_gpio_output(AT91_PIN_PA19, 0); /* CANRS */
+	} else {
+		at91_set_gpio_output(AT91_PIN_PA18, 0); /* CANRXEN */
+		at91_set_gpio_output(AT91_PIN_PA19, 1); /* CANRS */
+	}
+}
+
+static struct at91_can_data ek_can_data = {
+	.transceiver_switch = sam9263ek_transceiver_switch,
+};
 
 static void __init ek_board_init(void)
 {
@@ -431,6 +448,8 @@ static void __init ek_board_init(void)
 	/* LEDs */
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
 	at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
+	/* CAN */
+	at91_add_device_can(&ek_can_data);
 }
 
 MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
-- 
cgit v1.2.3


From 1887bde391a3216789c9a03ac111d5f6ebfb0c00 Mon Sep 17 00:00:00 2001
From: Denis Karpov <ext-denis.2.karpov@nokia.com>
Date: Tue, 22 Sep 2009 16:44:40 -0700
Subject: ARM: OMAP: mmc-twl4030: add context loss counter support

PM dynamic OFF state results in context loss.  That is, the host
controller has been powered off at some point, which means the registers
have been reset.  The driver must detect when this happens, and restore
the context.  This patch adds the means to detect context loss.

Note, the PM side is not yet implemented.

Signed-off-by: Denis Karpov <ext-denis.2.karpov@nokia.com>
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/mach-omap2/mmc-twl4030.c     | 15 +++++++++++++++
 arch/arm/plat-omap/include/mach/mmc.h |  3 +++
 2 files changed, 18 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index 3c04c2f1b23..30d028627c5 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -198,6 +198,18 @@ static int twl_mmc_resume(struct device *dev, int slot)
 #define twl_mmc_resume	NULL
 #endif
 
+#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
+
+static int twl4030_mmc_get_context_loss(struct device *dev)
+{
+	/* FIXME: PM DPS not implemented yet */
+	return 0;
+}
+
+#else
+#define twl4030_mmc_get_context_loss NULL
+#endif
+
 static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
 				int vdd)
 {
@@ -390,6 +402,9 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 		} else
 			mmc->slots[0].switch_pin = -EINVAL;
 
+		mmc->get_context_loss_count =
+				twl4030_mmc_get_context_loss;
+
 		/* write protect normally uses an OMAP gpio */
 		if (gpio_is_valid(c->gpio_wp)) {
 			gpio_request(c->gpio_wp, "mmc_wp");
diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h
index 81d5b36534b..2f7cf31f9cd 100644
--- a/arch/arm/plat-omap/include/mach/mmc.h
+++ b/arch/arm/plat-omap/include/mach/mmc.h
@@ -59,6 +59,9 @@ struct omap_mmc_platform_data {
 	int (*suspend)(struct device *dev, int slot);
 	int (*resume)(struct device *dev, int slot);
 
+	/* Return context loss count due to PM states changing */
+	int (*get_context_loss_count)(struct device *dev);
+
 	u64 dma_mask;
 
 	struct omap_mmc_slot_data {
-- 
cgit v1.2.3


From 23d99bb923fc23aeb1086d60eb1c70602b4e2036 Mon Sep 17 00:00:00 2001
From: Adrian Hunter <adrian.hunter@nokia.com>
Date: Tue, 22 Sep 2009 16:44:48 -0700
Subject: omap_hsmmc: make use of new MMC_CAP_NONREMOVABLE host capability

Let the board specify that a card is nonremovable e.g. eMMC

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/mach-omap2/mmc-twl4030.c     | 3 +++
 arch/arm/mach-omap2/mmc-twl4030.h     | 1 +
 arch/arm/plat-omap/include/mach/mmc.h | 3 +++
 3 files changed, 7 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index 30d028627c5..56f07f26f75 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -415,6 +415,9 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 		} else
 			mmc->slots[0].gpio_wp = -EINVAL;
 
+		if (c->nonremovable)
+			mmc->slots[0].nonremovable = 1;
+
 		/* NOTE:  MMC slots should have a Vcc regulator set up.
 		 * This may be from a TWL4030-family chip, another
 		 * controllable regulator, or a fixed supply.
diff --git a/arch/arm/mach-omap2/mmc-twl4030.h b/arch/arm/mach-omap2/mmc-twl4030.h
index 3807c45c9a6..75b0c645cb3 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.h
+++ b/arch/arm/mach-omap2/mmc-twl4030.h
@@ -12,6 +12,7 @@ struct twl4030_hsmmc_info {
 	bool	transceiver;	/* MMC-2 option */
 	bool	ext_clock;	/* use external pin for input clock */
 	bool	cover_only;	/* No card detect - just cover switch */
+	bool	nonremovable;	/* Nonremovable e.g. eMMC */
 	int	gpio_cd;	/* or -EINVAL */
 	int	gpio_wp;	/* or -EINVAL */
 	char	*name;		/* or NULL for default */
diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h
index 2f7cf31f9cd..bab486ce518 100644
--- a/arch/arm/plat-omap/include/mach/mmc.h
+++ b/arch/arm/plat-omap/include/mach/mmc.h
@@ -83,6 +83,9 @@ struct omap_mmc_platform_data {
 		/* use the internal clock */
 		unsigned internal_clock:1;
 
+		/* nonremovable e.g. eMMC */
+		unsigned nonremovable:1;
+
 		int switch_pin;			/* gpio (card detect) */
 		int gpio_wp;			/* gpio (write protect) */
 
-- 
cgit v1.2.3


From dd498effcfa6a196ba097adae3c5aa641115df88 Mon Sep 17 00:00:00 2001
From: Denis Karpov <ext-denis.2.karpov@nokia.com>
Date: Tue, 22 Sep 2009 16:44:49 -0700
Subject: omap_hsmmc: support for deeper power saving states

Support for multi-level dynamic power saving states in omap_hsmmc
(ENABLED->DISABLED->OFF).  In the "deepest" state (OFF) we switch off the
voltage regulators.

Signed-off-by: Denis Karpov <ext-denis.2.karpov@nokia.com>
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/mach-omap2/mmc-twl4030.c     | 3 +++
 arch/arm/mach-omap2/mmc-twl4030.h     | 1 +
 arch/arm/plat-omap/include/mach/mmc.h | 3 +++
 3 files changed, 7 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index 56f07f26f75..cb1cbd7934a 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -418,6 +418,9 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 		if (c->nonremovable)
 			mmc->slots[0].nonremovable = 1;
 
+		if (c->power_saving)
+			mmc->slots[0].power_saving = 1;
+
 		/* NOTE:  MMC slots should have a Vcc regulator set up.
 		 * This may be from a TWL4030-family chip, another
 		 * controllable regulator, or a fixed supply.
diff --git a/arch/arm/mach-omap2/mmc-twl4030.h b/arch/arm/mach-omap2/mmc-twl4030.h
index 75b0c645cb3..a47e68563fb 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.h
+++ b/arch/arm/mach-omap2/mmc-twl4030.h
@@ -13,6 +13,7 @@ struct twl4030_hsmmc_info {
 	bool	ext_clock;	/* use external pin for input clock */
 	bool	cover_only;	/* No card detect - just cover switch */
 	bool	nonremovable;	/* Nonremovable e.g. eMMC */
+	bool	power_saving;	/* Try to sleep or power off when possible */
 	int	gpio_cd;	/* or -EINVAL */
 	int	gpio_wp;	/* or -EINVAL */
 	char	*name;		/* or NULL for default */
diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h
index bab486ce518..82f1e29f5e5 100644
--- a/arch/arm/plat-omap/include/mach/mmc.h
+++ b/arch/arm/plat-omap/include/mach/mmc.h
@@ -86,6 +86,9 @@ struct omap_mmc_platform_data {
 		/* nonremovable e.g. eMMC */
 		unsigned nonremovable:1;
 
+		/* Try to sleep or power off when possible */
+		unsigned power_saving:1;
+
 		int switch_pin;			/* gpio (card detect) */
 		int gpio_wp;			/* gpio (write protect) */
 
-- 
cgit v1.2.3


From 9b7c18e070d59ba0acfdb936fd613dfa1d2a4e7d Mon Sep 17 00:00:00 2001
From: Adrian Hunter <adrian.hunter@nokia.com>
Date: Tue, 22 Sep 2009 16:44:50 -0700
Subject: ARM: OMAP: mmc-twl4030: add regulator sleep / wake function

Add the ability for the driver to put the card power regulators to sleep
and wake them up again.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/mach-omap2/mmc-twl4030.c     | 57 +++++++++++++++++++++++++++++++++++
 arch/arm/plat-omap/include/mach/mmc.h |  2 ++
 2 files changed, 59 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index cb1cbd7934a..c9c59a2db4e 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -340,6 +340,61 @@ static int twl_mmc23_set_power(struct device *dev, int slot, int power_on, int v
 	return ret;
 }
 
+static int twl_mmc1_set_sleep(struct device *dev, int slot, int sleep, int vdd,
+			      int cardsleep)
+{
+	struct twl_mmc_controller *c = &hsmmc[0];
+	int mode = sleep ? REGULATOR_MODE_STANDBY : REGULATOR_MODE_NORMAL;
+
+	return regulator_set_mode(c->vcc, mode);
+}
+
+static int twl_mmc23_set_sleep(struct device *dev, int slot, int sleep, int vdd,
+			       int cardsleep)
+{
+	struct twl_mmc_controller *c = NULL;
+	struct omap_mmc_platform_data *mmc = dev->platform_data;
+	int i, err, mode;
+
+	for (i = 1; i < ARRAY_SIZE(hsmmc); i++) {
+		if (mmc == hsmmc[i].mmc) {
+			c = &hsmmc[i];
+			break;
+		}
+	}
+
+	if (c == NULL)
+		return -ENODEV;
+
+	/*
+	 * If we don't see a Vcc regulator, assume it's a fixed
+	 * voltage always-on regulator.
+	 */
+	if (!c->vcc)
+		return 0;
+
+	mode = sleep ? REGULATOR_MODE_STANDBY : REGULATOR_MODE_NORMAL;
+
+	if (!c->vcc_aux)
+		return regulator_set_mode(c->vcc, mode);
+
+	if (cardsleep) {
+		/* VCC can be turned off if card is asleep */
+		struct regulator *vcc_aux = c->vcc_aux;
+
+		c->vcc_aux = NULL;
+		if (sleep)
+			err = twl_mmc23_set_power(dev, slot, 0, 0);
+		else
+			err = twl_mmc23_set_power(dev, slot, 1, vdd);
+		c->vcc_aux = vcc_aux;
+	} else
+		err = regulator_set_mode(c->vcc, mode);
+	if (err)
+		return err;
+	return regulator_set_mode(c->vcc_aux, mode);
+}
+
 static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata;
 
 void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
@@ -433,6 +488,7 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 		case 1:
 			/* on-chip level shifting via PBIAS0/PBIAS1 */
 			mmc->slots[0].set_power = twl_mmc1_set_power;
+			mmc->slots[0].set_sleep = twl_mmc1_set_sleep;
 			break;
 		case 2:
 			if (c->ext_clock)
@@ -443,6 +499,7 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 		case 3:
 			/* off-chip level shifting, or none */
 			mmc->slots[0].set_power = twl_mmc23_set_power;
+			mmc->slots[0].set_sleep = twl_mmc23_set_sleep;
 			break;
 		default:
 			pr_err("MMC%d configuration not supported!\n", c->mmc);
diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h
index 82f1e29f5e5..93902974275 100644
--- a/arch/arm/plat-omap/include/mach/mmc.h
+++ b/arch/arm/plat-omap/include/mach/mmc.h
@@ -95,6 +95,8 @@ struct omap_mmc_platform_data {
 		int (* set_bus_mode)(struct device *dev, int slot, int bus_mode);
 		int (* set_power)(struct device *dev, int slot, int power_on, int vdd);
 		int (* get_ro)(struct device *dev, int slot);
+		int (*set_sleep)(struct device *dev, int slot, int sleep,
+				 int vdd, int cardsleep);
 
 		/* return MMC cover switch state, can be NULL if not supported.
 		 *
-- 
cgit v1.2.3


From 5e763d2968148efafc352748b0ed598b1a695dad Mon Sep 17 00:00:00 2001
From: Adrian Hunter <adrian.hunter@nokia.com>
Date: Tue, 22 Sep 2009 16:45:05 -0700
Subject: ARM: OMAP: RX51: set MMC capabilities and power-saving flag

Specify MMC capabilities and set the power-saving flag for RX51.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/mach-omap2/board-rx51-peripherals.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index e70baa79901..e6e8290b782 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -19,6 +19,7 @@
 #include <linux/delay.h>
 #include <linux/regulator/machine.h>
 #include <linux/gpio.h>
+#include <linux/mmc/host.h>
 
 #include <mach/mcspi.h>
 #include <mach/mux.h>
@@ -102,6 +103,7 @@ static struct twl4030_hsmmc_info mmc[] = {
 		.cover_only	= true,
 		.gpio_cd	= 160,
 		.gpio_wp	= -EINVAL,
+		.power_saving	= true,
 	},
 	{
 		.name		= "internal",
@@ -109,6 +111,8 @@ static struct twl4030_hsmmc_info mmc[] = {
 		.wires		= 8,
 		.gpio_cd	= -EINVAL,
 		.gpio_wp	= -EINVAL,
+		.nonremovable	= true,
+		.power_saving	= true,
 	},
 	{}	/* Terminator */
 };
-- 
cgit v1.2.3


From 864f38ebdcb1f7dc4138b7ccb801f16f1696eb8e Mon Sep 17 00:00:00 2001
From: Rob Emanuele <rob@emanuele.us>
Date: Tue, 22 Sep 2009 16:45:22 -0700
Subject: AT91: atmel-mci: Platform configuration to the the atmel-mci driver

Created a modified version of the at91sam9g20 evaluation kit platform
(board-sam9g20ek-2slot-mmc.c) and device support to make use of the
updated atmel-mci driver.

As the use of two slots modify GPIO pin allocation, we create another
board file.

This requires getting the most updated arch/arm/tools/mach-types from
http://www.arm.linux.org.uk/developer/machines/download.php to have the machine
type for the at91sam9g20ek-2slot-mmc board.

[nicolas.ferre@atmel.com: printk, slot_count modification in at91sam9260_devices.c file]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Rob Emanuele <rob@emanuele.us>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/mach-at91/Kconfig                     |   7 +
 arch/arm/mach-at91/Makefile                    |   1 +
 arch/arm/mach-at91/at91sam9260_devices.c       |  96 +++++++++
 arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c | 277 +++++++++++++++++++++++++
 arch/arm/mach-at91/include/mach/board.h        |   5 +
 5 files changed, 386 insertions(+)
 create mode 100644 arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c

(limited to 'arch/arm')

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index a24d824c428..e35d54d43e7 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -289,6 +289,13 @@ config MACH_NEOCORE926
 	help
 	  Select this if you are using the Adeneo Neocore 926 board.
 
+config MACH_AT91SAM9G20EK_2MMC
+	bool "Atmel AT91SAM9G20-EK Evaluation Kit modified for 2 MMC Slots"
+	depends on ARCH_AT91SAM9G20
+	help
+	  Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
+	  Rev A or B modified for 2 MMC Slots.
+
 endif
 
 # ----------------------------------------------------------
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index a6ed015d82e..ada440aab0c 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -59,6 +59,7 @@ obj-$(CONFIG_MACH_AT91SAM9RLEK)	+= board-sam9rlek.o
 
 # AT91SAM9G20 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
+obj-$(CONFIG_MACH_AT91SAM9G20EK_2MMC) += board-sam9g20ek-2slot-mmc.o
 obj-$(CONFIG_MACH_CPU9G20)	+= board-cpu9krea.o
 
 # AT91SAM9G45 board-specific support
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index ee4ea0e720c..07eb7b07e44 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -278,6 +278,102 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
 #endif
 
+/* --------------------------------------------------------------------
+ *  MMC / SD Slot for Atmel MCI Driver
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
+static u64 mmc_dmamask = DMA_BIT_MASK(32);
+static struct mci_platform_data mmc_data;
+
+static struct resource mmc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9260_BASE_MCI,
+		.end	= AT91SAM9260_BASE_MCI + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9260_ID_MCI,
+		.end	= AT91SAM9260_ID_MCI,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9260_mmc_device = {
+	.name		= "atmel_mci",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &mmc_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &mmc_data,
+	},
+	.resource	= mmc_resources,
+	.num_resources	= ARRAY_SIZE(mmc_resources),
+};
+
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
+{
+	unsigned int i;
+	unsigned int slot_count = 0;
+
+	if (!data)
+		return;
+
+	for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) {
+		if (data->slot[i].bus_width) {
+			/* input/irq */
+			if (data->slot[i].detect_pin) {
+				at91_set_gpio_input(data->slot[i].detect_pin, 1);
+				at91_set_deglitch(data->slot[i].detect_pin, 1);
+			}
+			if (data->slot[i].wp_pin)
+				at91_set_gpio_input(data->slot[i].wp_pin, 1);
+
+			switch (i) {
+			case 0:
+				/* CMD */
+				at91_set_A_periph(AT91_PIN_PA7, 1);
+				/* DAT0, maybe DAT1..DAT3 */
+				at91_set_A_periph(AT91_PIN_PA6, 1);
+				if (data->slot[i].bus_width == 4) {
+					at91_set_A_periph(AT91_PIN_PA9, 1);
+					at91_set_A_periph(AT91_PIN_PA10, 1);
+					at91_set_A_periph(AT91_PIN_PA11, 1);
+				}
+				slot_count++;
+				break;
+			case 1:
+				/* CMD */
+				at91_set_B_periph(AT91_PIN_PA1, 1);
+				/* DAT0, maybe DAT1..DAT3 */
+				at91_set_B_periph(AT91_PIN_PA0, 1);
+				if (data->slot[i].bus_width == 4) {
+					at91_set_B_periph(AT91_PIN_PA5, 1);
+					at91_set_B_periph(AT91_PIN_PA4, 1);
+					at91_set_B_periph(AT91_PIN_PA3, 1);
+				}
+				slot_count++;
+				break;
+			default:
+				printk(KERN_ERR
+					"AT91: SD/MMC slot %d not available\n", i);
+				break;
+			}
+		}
+	}
+
+	if (slot_count) {
+		/* CLK */
+		at91_set_A_periph(AT91_PIN_PA8, 0);
+
+		mmc_data = *data;
+		platform_device_register(&at91sam9260_mmc_device);
+	}
+}
+#else
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
+#endif
+
 
 /* --------------------------------------------------------------------
  *  NAND / SmartMedia
diff --git a/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c b/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c
new file mode 100644
index 00000000000..a28e53faf71
--- /dev/null
+++ b/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c
@@ -0,0 +1,277 @@
+/*
+ *  Copyright (C) 2005 SAN People
+ *  Copyright (C) 2008 Atmel
+ *  Copyright (C) 2009 Rob Emanuele
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/at73c213.h>
+#include <linux/clk.h>
+
+#include <mach/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+
+static void __init ek_map_io(void)
+{
+	/* Initialize processor: 18.432 MHz crystal */
+	at91sam9260_initialize(18432000);
+
+	/* DGBU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			   | ATMEL_UART_RI);
+
+	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init ek_init_irq(void)
+{
+	at91sam9260_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata ek_usbh_data = {
+	.ports		= 2,
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata ek_udc_data = {
+	.vbus_pin	= AT91_PIN_PC5,
+	.pullup_pin	= 0,		/* pull-up driven by UDC */
+};
+
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info ek_spi_devices[] = {
+#if !defined(CONFIG_MMC_ATMELMCI)
+	{	/* DataFlash chip */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 1,
+		.max_speed_hz	= 15 * 1000 * 1000,
+		.bus_num	= 0,
+	},
+#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
+	{	/* DataFlash card */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 0,
+		.max_speed_hz	= 15 * 1000 * 1000,
+		.bus_num	= 0,
+	},
+#endif
+#endif
+};
+
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata ek_macb_data = {
+	.phy_irq_pin	= AT91_PIN_PC12,
+	.is_rmii	= 1,
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+	{
+		.name   = "Bootstrap",
+		.offset = 0,
+		.size   = 4 * SZ_1M,
+	},
+	{
+		.name	= "Partition 1",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 60 * SZ_1M,
+	},
+	{
+		.name	= "Partition 2",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(ek_nand_partition);
+	return ek_nand_partition;
+}
+
+/* det_pin is not connected */
+static struct atmel_nand_data __initdata ek_nand_data = {
+	.ale		= 21,
+	.cle		= 22,
+	.rdy_pin	= AT91_PIN_PC13,
+	.enable_pin	= AT91_PIN_PC14,
+	.partition_info	= nand_partitions,
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
+	.bus_width_16	= 1,
+#else
+	.bus_width_16	= 0,
+#endif
+};
+
+static struct sam9_smc_config __initdata ek_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 2,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 2,
+
+	.ncs_read_pulse		= 4,
+	.nrd_pulse		= 4,
+	.ncs_write_pulse	= 4,
+	.nwe_pulse		= 4,
+
+	.read_cycle		= 7,
+	.write_cycle		= 7,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
+	.tdf_cycles		= 3,
+};
+
+static void __init ek_add_device_nand(void)
+{
+	/* setup bus-width (8 or 16) */
+	if (ek_nand_data.bus_width_16)
+		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
+	else
+		ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
+
+	/* configure chip-select 3 (NAND) */
+	sam9_smc_configure(3, &ek_nand_smc_config);
+
+	at91_add_device_nand(&ek_nand_data);
+}
+
+
+/*
+ * MCI (SD/MMC)
+ * det_pin and wp_pin are not connected
+ */
+#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
+static struct mci_platform_data __initdata ek_mmc_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= -ENODEV,
+		.wp_pin		= -ENODEV,
+	},
+	.slot[1] = {
+		.bus_width	= 4,
+		.detect_pin	= -ENODEV,
+		.wp_pin		= -ENODEV,
+	},
+
+};
+#else
+static struct amci_platform_data __initdata ek_mmc_data = {
+};
+#endif
+
+/*
+ * LEDs
+ */
+static struct gpio_led ek_leds[] = {
+	{	/* "bottom" led, green, userled1 to be defined */
+		.name			= "ds5",
+		.gpio			= AT91_PIN_PB12,
+		.active_low		= 1,
+		.default_trigger	= "none",
+	},
+	{	/* "power" led, yellow */
+		.name			= "ds1",
+		.gpio			= AT91_PIN_PB13,
+		.default_trigger	= "heartbeat",
+	}
+};
+
+static struct i2c_board_info __initdata ek_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("24c512", 0x50),
+	},
+};
+
+
+static void __init ek_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* USB Host */
+	at91_add_device_usbh(&ek_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&ek_udc_data);
+	/* SPI */
+	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+	/* NAND */
+	ek_add_device_nand();
+	/* Ethernet */
+	at91_add_device_eth(&ek_macb_data);
+	/* MMC */
+	at91_add_device_mci(0, &ek_mmc_data);
+	/* I2C */
+	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
+	/* LEDs */
+	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+	/* PCK0 provides MCLK to the WM8731 */
+	at91_set_B_periph(AT91_PIN_PC1, 0);
+	/* SSC (for WM8731) */
+	at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
+}
+
+MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod")
+	/* Maintainer: Rob Emanuele */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= ek_map_io,
+	.init_irq	= ek_init_irq,
+	.init_machine	= ek_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 13f27a4b882..583f38a38df 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -37,6 +37,7 @@
 #include <linux/leds.h>
 #include <linux/spi/spi.h>
 #include <linux/usb/atmel_usba_udc.h>
+#include <linux/atmel-mci.h>
 #include <sound/atmel-ac97c.h>
 
  /* USB Device */
@@ -64,6 +65,7 @@ struct at91_cf_data {
 extern void __init at91_add_device_cf(struct at91_cf_data *data);
 
  /* MMC / SD */
+  /* at91_mci platform config */
 struct at91_mmc_data {
 	u8		det_pin;	/* card detect IRQ */
 	unsigned	slot_b:1;	/* uses Slot B */
@@ -73,6 +75,9 @@ struct at91_mmc_data {
 };
 extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data);
 
+  /* atmel-mci platform config */
+extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data);
+
  /* Ethernet (EMAC & MACB) */
 struct at91_eth_data {
 	u32		phy_mask;
-- 
cgit v1.2.3


From 82cf818d54f0a415a031eabd0949a81946445198 Mon Sep 17 00:00:00 2001
From: kishore kadiyala <kishore.kadiyala@ti.com>
Date: Tue, 22 Sep 2009 16:45:25 -0700
Subject: omap4: mmc driver support on OMAP4

Add basic support for all 5 MMC controllers on OMAP4.

This patch doesn't include mmc-regulator support

Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Acked-by: Madhusudhan Chikkature <madhu.cr@ti.com>
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: Tony Lindgren <tony@atomide.com>
Cc: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Cc: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/mach-omap2/devices.c          | 42 ++++++++++++++++++++++++++++++----
 arch/arm/plat-omap/include/mach/irqs.h |  2 ++
 arch/arm/plat-omap/include/mach/mmc.h  |  9 +++++++-
 3 files changed, 47 insertions(+), 6 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index a2e915639b7..92009a4c6c8 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -397,7 +397,7 @@ static inline void omap_init_sha1_md5(void) { }
 
 /*-------------------------------------------------------------------------*/
 
-#ifdef CONFIG_ARCH_OMAP3
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 
 #define MMCHS_SYSCONFIG			0x0010
 #define MMCHS_SYSCONFIG_SWRESET		(1 << 1)
@@ -424,8 +424,8 @@ static struct platform_device dummy_pdev = {
  **/
 static void __init omap_hsmmc_reset(void)
 {
-	u32 i, nr_controllers = cpu_is_omap34xx() ? OMAP34XX_NR_MMC :
-		OMAP24XX_NR_MMC;
+	u32 i, nr_controllers = cpu_is_omap44xx() ? OMAP44XX_NR_MMC :
+		(cpu_is_omap34xx() ? OMAP34XX_NR_MMC : OMAP24XX_NR_MMC);
 
 	for (i = 0; i < nr_controllers; i++) {
 		u32 v, base = 0;
@@ -442,8 +442,21 @@ static void __init omap_hsmmc_reset(void)
 		case 2:
 			base = OMAP3_MMC3_BASE;
 			break;
+		case 3:
+			if (!cpu_is_omap44xx())
+				return;
+			base = OMAP4_MMC4_BASE;
+			break;
+		case 4:
+			if (!cpu_is_omap44xx())
+				return;
+			base = OMAP4_MMC5_BASE;
+			break;
 		}
 
+		if (cpu_is_omap44xx())
+			base += OMAP4_MMC_REG_OFFSET;
+
 		dummy_pdev.id = i;
 		dev_set_name(&dummy_pdev.dev, "mmci-omap-hs.%d", i);
 		iclk = clk_get(dev, "ick");
@@ -581,11 +594,23 @@ void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
 			irq = INT_24XX_MMC2_IRQ;
 			break;
 		case 2:
-			if (!cpu_is_omap34xx())
+			if (!cpu_is_omap44xx() && !cpu_is_omap34xx())
 				return;
 			base = OMAP3_MMC3_BASE;
 			irq = INT_34XX_MMC3_IRQ;
 			break;
+		case 3:
+			if (!cpu_is_omap44xx())
+				return;
+			base = OMAP4_MMC4_BASE + OMAP4_MMC_REG_OFFSET;
+			irq = INT_44XX_MMC4_IRQ;
+			break;
+		case 4:
+			if (!cpu_is_omap44xx())
+				return;
+			base = OMAP4_MMC5_BASE + OMAP4_MMC_REG_OFFSET;
+			irq = INT_44XX_MMC5_IRQ;
+			break;
 		default:
 			continue;
 		}
@@ -593,8 +618,15 @@ void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
 		if (cpu_is_omap2420()) {
 			size = OMAP2420_MMC_SIZE;
 			name = "mmci-omap";
+		} else if (cpu_is_omap44xx()) {
+			if (i < 3) {
+				base += OMAP4_MMC_REG_OFFSET;
+				irq += IRQ_GIC_START;
+			}
+			size = OMAP4_HSMMC_SIZE;
+			name = "mmci-omap-hs";
 		} else {
-			size = HSMMC_SIZE;
+			size = OMAP3_HSMMC_SIZE;
 			name = "mmci-omap-hs";
 		}
 		omap_mmc_add(name, i, base, size, irq, mmc_data[i]);
diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h
index fb7cb772399..28a165058b6 100644
--- a/arch/arm/plat-omap/include/mach/irqs.h
+++ b/arch/arm/plat-omap/include/mach/irqs.h
@@ -503,6 +503,7 @@
 #define INT_44XX_FPKA_READY_IRQ	(50 + IRQ_GIC_START)
 #define INT_44XX_SHA1MD51_IRQ	(51 + IRQ_GIC_START)
 #define INT_44XX_RNG_IRQ	(52 + IRQ_GIC_START)
+#define INT_44XX_MMC5_IRQ	(59 + IRQ_GIC_START)
 #define INT_44XX_I2C3_IRQ	(61 + IRQ_GIC_START)
 #define INT_44XX_FPKA_ERROR_IRQ	(64 + IRQ_GIC_START)
 #define INT_44XX_PBIAS_IRQ	(75 + IRQ_GIC_START)
@@ -511,6 +512,7 @@
 #define INT_44XX_TLL_IRQ	(78 + IRQ_GIC_START)
 #define INT_44XX_PARTHASH_IRQ	(79 + IRQ_GIC_START)
 #define INT_44XX_MMC3_IRQ	(94 + IRQ_GIC_START)
+#define INT_44XX_MMC4_IRQ	(96 + IRQ_GIC_START)
 
 
 /* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h
index 93902974275..7229b959330 100644
--- a/arch/arm/plat-omap/include/mach/mmc.h
+++ b/arch/arm/plat-omap/include/mach/mmc.h
@@ -25,11 +25,18 @@
 
 #define OMAP24XX_NR_MMC		2
 #define OMAP34XX_NR_MMC		3
+#define OMAP44XX_NR_MMC		5
 #define OMAP2420_MMC_SIZE	OMAP1_MMC_SIZE
-#define HSMMC_SIZE		0x200
+#define OMAP3_HSMMC_SIZE	0x200
+#define OMAP4_HSMMC_SIZE	0x1000
 #define OMAP2_MMC1_BASE		0x4809c000
 #define OMAP2_MMC2_BASE		0x480b4000
 #define OMAP3_MMC3_BASE		0x480ad000
+#define OMAP4_MMC4_BASE		0x480d1000
+#define OMAP4_MMC5_BASE		0x480d5000
+#define OMAP4_MMC_REG_OFFSET	0x100
+#define HSMMC5			(1 << 4)
+#define HSMMC4			(1 << 3)
 #define HSMMC3			(1 << 2)
 #define HSMMC2			(1 << 1)
 #define HSMMC1			(1 << 0)
-- 
cgit v1.2.3


From b5f3294f0be5496aec01e5aa709a5fab8bb2f225 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue, 22 Sep 2009 16:46:02 -0700
Subject: spi: add SPI driver for most known i.MX SoCs

This driver has been tested on i.MX1/i.MX27/i.MX35 with an AT25 type
EEPROM and on i.MX27/i.MX31 with a Freescale MC13783 PMIC.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: David Brownell <david-b@pacbell.net>
Cc: Andrea Paterniani <a.paterniani@swapp-eng.it>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/plat-mxc/include/mach/spi.h | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)
 create mode 100644 arch/arm/plat-mxc/include/mach/spi.h

(limited to 'arch/arm')

diff --git a/arch/arm/plat-mxc/include/mach/spi.h b/arch/arm/plat-mxc/include/mach/spi.h
new file mode 100644
index 00000000000..08be445e8eb
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/spi.h
@@ -0,0 +1,27 @@
+
+#ifndef __MACH_SPI_H_
+#define __MACH_SPI_H_
+
+/*
+ * struct spi_imx_master - device.platform_data for SPI controller devices.
+ * @chipselect: Array of chipselects for this master. Numbers >= 0 mean gpio
+ *              pins, numbers < 0 mean internal CSPI chipselects according
+ *              to MXC_SPI_CS(). Normally you want to use gpio based chip
+ *              selects as the CSPI module tries to be intelligent about
+ *              when to assert the chipselect: The CSPI module deasserts the
+ *              chipselect once it runs out of input data. The other problem
+ *              is that it is not possible to mix between high active and low
+ *              active chipselects on one single bus using the internal
+ *              chipselects. Unfortunately Freescale decided to put some
+ *              chipselects on dedicated pins which are not usable as gpios,
+ *              so we have to support the internal chipselects.
+ * @num_chipselect: ARRAY_SIZE(chipselect)
+ */
+struct spi_imx_master {
+	int	*chipselect;
+	int	num_chipselect;
+};
+
+#define MXC_SPI_CS(no)	((no) - 32)
+
+#endif /* __MACH_SPI_H_*/
-- 
cgit v1.2.3


From 7869c0b9ed44404bbc675ef76f8ccb3be5496f39 Mon Sep 17 00:00:00 2001
From: Syed Rafiuddin <rafiuddin.syed@ti.com>
Date: Tue, 22 Sep 2009 16:46:18 -0700
Subject: spi: McSPI support for OMAP4

tAdd adds McSPI support for OMAP4430 SDP platform.  All the base addresses
are changed between OMAP1/2/3 and OMAP4.  The fields of the resource
structures are filled at runtime to have McSPI support on OMAP4.

Signed-off-by: Syed Rafiuddin <rafiuddin.syed@ti.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/mach-omap2/devices.c | 29 +++++++++++++++++++++++------
 1 file changed, 23 insertions(+), 6 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 92009a4c6c8..bcfcfc7fdb9 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -257,6 +257,11 @@ static inline void omap_init_sti(void) {}
 #define OMAP2_MCSPI3_BASE		0x480b8000
 #define OMAP2_MCSPI4_BASE		0x480ba000
 
+#define OMAP4_MCSPI1_BASE		0x48098100
+#define OMAP4_MCSPI2_BASE		0x4809a100
+#define OMAP4_MCSPI3_BASE		0x480b8100
+#define OMAP4_MCSPI4_BASE		0x480ba100
+
 static struct omap2_mcspi_platform_config omap2_mcspi1_config = {
 	.num_cs		= 4,
 };
@@ -301,7 +306,8 @@ static struct platform_device omap2_mcspi2 = {
 	},
 };
 
-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
+	defined(CONFIG_ARCH_OMAP4)
 static struct omap2_mcspi_platform_config omap2_mcspi3_config = {
 	.num_cs		= 2,
 };
@@ -325,7 +331,7 @@ static struct platform_device omap2_mcspi3 = {
 };
 #endif
 
-#ifdef CONFIG_ARCH_OMAP3
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 static struct omap2_mcspi_platform_config omap2_mcspi4_config = {
 	.num_cs		= 1,
 };
@@ -351,14 +357,25 @@ static struct platform_device omap2_mcspi4 = {
 
 static void omap_init_mcspi(void)
 {
+	if (cpu_is_omap44xx()) {
+		omap2_mcspi1_resources[0].start	= OMAP4_MCSPI1_BASE;
+		omap2_mcspi1_resources[0].end	= OMAP4_MCSPI1_BASE + 0xff;
+		omap2_mcspi2_resources[0].start	= OMAP4_MCSPI2_BASE;
+		omap2_mcspi2_resources[0].end	= OMAP4_MCSPI2_BASE + 0xff;
+		omap2_mcspi3_resources[0].start	= OMAP4_MCSPI3_BASE;
+		omap2_mcspi3_resources[0].end	= OMAP4_MCSPI3_BASE + 0xff;
+		omap2_mcspi4_resources[0].start	= OMAP4_MCSPI4_BASE;
+		omap2_mcspi4_resources[0].end	= OMAP4_MCSPI4_BASE + 0xff;
+	}
 	platform_device_register(&omap2_mcspi1);
 	platform_device_register(&omap2_mcspi2);
-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
-	if (cpu_is_omap2430() || cpu_is_omap343x())
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
+	defined(CONFIG_ARCH_OMAP4)
+	if (cpu_is_omap2430() || cpu_is_omap343x() || cpu_is_omap44xx())
 		platform_device_register(&omap2_mcspi3);
 #endif
-#ifdef CONFIG_ARCH_OMAP3
-	if (cpu_is_omap343x())
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
+	if (cpu_is_omap343x() || cpu_is_omap44xx())
 		platform_device_register(&omap2_mcspi4);
 #endif
 }
-- 
cgit v1.2.3


From 66d2f99d0bb5a2972fb5c1d88b61169510e540d6 Mon Sep 17 00:00:00 2001
From: Imre Deak <imre.deak@nokia.com>
Date: Tue, 22 Sep 2009 16:46:41 -0700
Subject: omapfb: add support for MIPI-DCS compatible LCDs

Fixed-by: Mike Wege <ext-mike.wege@nokia.com>
Fixed-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Fixed-by: Timo Savola <tsavola@movial.fi>
Fixed-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Fixed-by: Trilok Soni <soni.trilok@gmail.com>
Signed-off-by: Imre Deak <imre.deak@solidboot.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/plat-omap/include/mach/lcd_mipid.h | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/include/mach/lcd_mipid.h b/arch/arm/plat-omap/include/mach/lcd_mipid.h
index f8fbc4801e5..8e52c657228 100644
--- a/arch/arm/plat-omap/include/mach/lcd_mipid.h
+++ b/arch/arm/plat-omap/include/mach/lcd_mipid.h
@@ -16,7 +16,12 @@ enum mipid_test_result {
 struct mipid_platform_data {
 	int	nreset_gpio;
 	int	data_lines;
+
 	void	(*shutdown)(struct mipid_platform_data *pdata);
+	void	(*set_bklight_level)(struct mipid_platform_data *pdata,
+				     int level);
+	int	(*get_bklight_level)(struct mipid_platform_data *pdata);
+	int	(*get_bklight_max)(struct mipid_platform_data *pdata);
 };
 
 #endif
-- 
cgit v1.2.3


From fb49b78452503f6cdf8b243ccb40cda81aae9998 Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@mvista.com>
Date: Tue, 22 Sep 2009 16:46:48 -0700
Subject: omapfb: add support for the 3430SDP LCD

The 3430SDP uses the same panel as the 2430SDP.  The main difference are
in the GPIO lines used for panel enable and backlight, and the VAUX
register/commands sent to the TWL4030 power subsystem.

Also, some misc. whitespace cleanups.

Fixed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kevin Hilman <khilman@mvsita.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Imre Deak <imre.deak@nokia.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/configs/omap_3430sdp_defconfig | 39 +++++++++++++++++++++++++++++++--
 1 file changed, 37 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/configs/omap_3430sdp_defconfig b/arch/arm/configs/omap_3430sdp_defconfig
index 9a510eab75a..8a4a7e2ba87 100644
--- a/arch/arm/configs/omap_3430sdp_defconfig
+++ b/arch/arm/configs/omap_3430sdp_defconfig
@@ -1313,8 +1313,33 @@ CONFIG_DVB_ISL6421=m
 # Graphics support
 #
 # CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -1331,6 +1356,16 @@ CONFIG_DISPLAY_SUPPORT=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
 CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=y
-- 
cgit v1.2.3


From 27969ccc2840c42bfbe4f55d08f0c7ec254d4e93 Mon Sep 17 00:00:00 2001
From: Koen Kooi <koen@openembedded.org>
Date: Tue, 22 Sep 2009 16:46:50 -0700
Subject: omapfb: add support for the OMAP3 Beagle DVI output

The default resolution is 1024x768@24bit

This version addresses the comments from Felipe Balbi adn Arun Edarath

Fixed-by: Felipe Contreras <felipe.contreras@gmail.com>
Fixed-by: Steve Sakoman <steve@sakoman.com>
Fixed-by: Jarkko Nikula <jarkko.nikula@gmail.com>
Fixed-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Koen Kooi <koen@openembedded.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Imre Deak <imre.deak@nokia.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/configs/omap3_beagle_defconfig | 47 ++++++++++++++++++++++++++++++++-
 1 file changed, 46 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/configs/omap3_beagle_defconfig b/arch/arm/configs/omap3_beagle_defconfig
index 51c0fa8897c..357d4021e2d 100644
--- a/arch/arm/configs/omap3_beagle_defconfig
+++ b/arch/arm/configs/omap3_beagle_defconfig
@@ -778,7 +778,33 @@ CONFIG_DAB=y
 #
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -791,6 +817,25 @@ CONFIG_DAB=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB_SUPPORT=y
-- 
cgit v1.2.3


From 8fea8844a72f95ef22b108f5dc5c4237019771dd Mon Sep 17 00:00:00 2001
From: "Stanley.Miao" <stanley.miao@windriver.com>
Date: Tue, 22 Sep 2009 16:46:52 -0700
Subject: omapfb: add support for the ZOOM MDK LCD

Add glue to control the OMAP_LDP LCD as a frame buffer device using the
existing dispc.c driver under omapfb.

Patch updated for mainline kernel.  Note that the drivers/video/omap
should be updated to pass omap_lcd_config in platform_data.  The patch
should also be updated to compile if twl4030 is not selected, and
eventually to use the regulator framework.

Fixed-by: Jarkko Nikula <jarkko.nikula@gmail.com>
Fixed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stanley.Miao <stanley.miao@windriver.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Imre Deak <imre.deak@nokia.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/configs/omap_ldp_defconfig | 54 +++++++++++++++++++++++++++++++++++--
 1 file changed, 52 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/configs/omap_ldp_defconfig b/arch/arm/configs/omap_ldp_defconfig
index 679a4a3e265..b9c48919a68 100644
--- a/arch/arm/configs/omap_ldp_defconfig
+++ b/arch/arm/configs/omap_ldp_defconfig
@@ -690,6 +690,7 @@ CONFIG_GPIOLIB=y
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
 
 #
 # PCI GPIO expanders:
@@ -742,6 +743,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+CONFIG_TWL4030_CORE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_T7L66XB is not set
 # CONFIG_MFD_TC6387XB is not set
@@ -767,8 +769,46 @@ CONFIG_DAB=y
 #
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+CONFIG_FB_OMAP=y
+CONFIG_FB_OMAP_LCD_VGA=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=4
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+CONFIG_LCD_PLATFORM=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+# CONFIG_BACKLIGHT_GENERIC is not set
 
 #
 # Display device support
@@ -780,6 +820,16 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
 CONFIG_SND=y
 # CONFIG_SND_SEQUENCER is not set
-- 
cgit v1.2.3


From c8f1c1b9e120223ab5b619ff0fc1f32c635248ad Mon Sep 17 00:00:00 2001
From: Imre Deak <imre.deak@nokia.com>
Date: Tue, 22 Sep 2009 16:46:54 -0700
Subject: N770: enable LCD MIPI-DCS in Kconfig

Signed-off-by: Imre Deak <imre.deak@nokia.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/configs/n770_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/configs/n770_defconfig b/arch/arm/configs/n770_defconfig
index 672f6db06a5..a1657b73683 100644
--- a/arch/arm/configs/n770_defconfig
+++ b/arch/arm/configs/n770_defconfig
@@ -875,7 +875,7 @@ CONFIG_FB_OMAP_LCDC_EXTERNAL=y
 CONFIG_FB_OMAP_LCDC_HWA742=y
 # CONFIG_FB_OMAP_LCDC_BLIZZARD is not set
 CONFIG_FB_OMAP_MANUAL_UPDATE=y
-# CONFIG_FB_OMAP_LCD_MIPID is not set
+CONFIG_FB_OMAP_LCD_MIPID=y
 # CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
 CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
 # CONFIG_FB_OMAP_DMA_TUNE is not set
-- 
cgit v1.2.3


From 5910d35cd6c0122a490000a6de0774ac7ebcc2de Mon Sep 17 00:00:00 2001
From: arun c <arunedarath@mistralsolutions.com>
Date: Tue, 22 Sep 2009 16:46:59 -0700
Subject: omapfb: fix coding style / remove dead line

- use __iomem type attribute where appropriate
- expand (a ? : b) to (a ? a : b)
As suggested by Russel King <linux@arm.linux.org.uk>

- remove a dead line from omapfb_main.c

Signed-off-by: Arun C <arunedarath@mistralsolutions.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Imre Deak <imre.deak@nokia.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/plat-omap/include/mach/omapfb.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/include/mach/omapfb.h b/arch/arm/plat-omap/include/mach/omapfb.h
index 7b74d1255e0..b226bdf4573 100644
--- a/arch/arm/plat-omap/include/mach/omapfb.h
+++ b/arch/arm/plat-omap/include/mach/omapfb.h
@@ -276,8 +276,8 @@ typedef int (*omapfb_notifier_callback_t)(struct notifier_block *,
 					  void *fbi);
 
 struct omapfb_mem_region {
-	dma_addr_t	paddr;
-	void		*vaddr;
+	u32		paddr;
+	void __iomem	*vaddr;
 	unsigned long	size;
 	u8		type;		/* OMAPFB_PLANE_MEM_* */
 	unsigned	alloc:1;	/* allocated by the driver */
-- 
cgit v1.2.3


From c6012189a40d33213ead5d15769fab615443206f Mon Sep 17 00:00:00 2001
From: Ryan Mallon <ryan@bluewatersys.com>
Date: Tue, 22 Sep 2009 16:47:09 -0700
Subject: ep93xx video driver platform support

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Daniele Venzano <linux@brownhat.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/mach-ep93xx/clock.c                    | 88 ++++++++++++++++++++++++-
 arch/arm/mach-ep93xx/core.c                     | 32 +++++++++
 arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h |  6 ++
 arch/arm/mach-ep93xx/include/mach/fb.h          | 56 ++++++++++++++++
 arch/arm/mach-ep93xx/include/mach/platform.h    |  2 +
 5 files changed, 183 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-ep93xx/include/mach/fb.h

(limited to 'arch/arm')

diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 3dd0e2a2309..dda19cd7619 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -37,7 +37,7 @@ struct clk {
 static unsigned long get_uart_rate(struct clk *clk);
 
 static int set_keytchclk_rate(struct clk *clk, unsigned long rate);
-
+static int set_div_rate(struct clk *clk, unsigned long rate);
 
 static struct clk clk_uart1 = {
 	.sw_locked	= 1,
@@ -76,6 +76,13 @@ static struct clk clk_pwm = {
 	.rate		= EP93XX_EXT_CLK_RATE,
 };
 
+static struct clk clk_video = {
+	.sw_locked	= 1,
+	.enable_reg     = EP93XX_SYSCON_VIDCLKDIV,
+	.enable_mask    = EP93XX_SYSCON_CLKDIV_ENABLE,
+	.set_rate	= set_div_rate,
+};
+
 /* DMA Clocks */
 static struct clk clk_m2p0 = {
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
@@ -140,6 +147,7 @@ static struct clk_lookup clocks[] = {
 	INIT_CK(NULL,			"pll2",		&clk_pll2),
 	INIT_CK("ep93xx-ohci",		NULL,		&clk_usb_host),
 	INIT_CK("ep93xx-keypad",	NULL,		&clk_keypad),
+	INIT_CK("ep93xx-fb",		NULL,		&clk_video),
 	INIT_CK(NULL,			"pwm_clk",	&clk_pwm),
 	INIT_CK(NULL,			"m2p0",		&clk_m2p0),
 	INIT_CK(NULL,			"m2p1",		&clk_m2p1),
@@ -236,6 +244,84 @@ static int set_keytchclk_rate(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
+static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
+				  int *pdiv, int *div)
+{
+	unsigned long max_rate, best_rate = 0,
+		actual_rate = 0, mclk_rate = 0, rate_err = -1;
+	int i, found = 0, __div = 0, __pdiv = 0;
+
+	/* Don't exceed the maximum rate */
+	max_rate = max(max(clk_pll1.rate / 4, clk_pll2.rate / 4),
+		       (unsigned long)EP93XX_EXT_CLK_RATE / 4);
+	rate = min(rate, max_rate);
+
+	/*
+	 * Try the two pll's and the external clock
+	 * Because the valid predividers are 2, 2.5 and 3, we multiply
+	 * all the clocks by 2 to avoid floating point math.
+	 *
+	 * This is based on the algorithm in the ep93xx raster guide:
+	 * http://be-a-maverick.com/en/pubs/appNote/AN269REV1.pdf
+	 *
+	 */
+	for (i = 0; i < 3; i++) {
+		if (i == 0)
+			mclk_rate = EP93XX_EXT_CLK_RATE * 2;
+		else if (i == 1)
+			mclk_rate = clk_pll1.rate * 2;
+		else if (i == 2)
+			mclk_rate = clk_pll2.rate * 2;
+
+		/* Try each predivider value */
+		for (__pdiv = 4; __pdiv <= 6; __pdiv++) {
+			__div = mclk_rate / (rate * __pdiv);
+			if (__div < 2 || __div > 127)
+				continue;
+
+			actual_rate = mclk_rate / (__pdiv * __div);
+
+			if (!found || abs(actual_rate - rate) < rate_err) {
+				*pdiv = __pdiv - 3;
+				*div = __div;
+				*psel = (i == 2);
+				*esel = (i != 0);
+				best_rate = actual_rate;
+				rate_err = abs(actual_rate - rate);
+				found = 1;
+			}
+		}
+	}
+
+	if (!found)
+		return 0;
+
+	return best_rate;
+}
+
+static int set_div_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long actual_rate;
+	int psel = 0, esel = 0, pdiv = 0, div = 0;
+	u32 val;
+
+	actual_rate = calc_clk_div(rate, &psel, &esel, &pdiv, &div);
+	if (actual_rate == 0)
+		return -EINVAL;
+	clk->rate = actual_rate;
+
+	/* Clear the esel, psel, pdiv and div bits */
+	val = __raw_readl(clk->enable_reg);
+	val &= ~0x7fff;
+
+	/* Set the new esel, psel, pdiv and div bits for the new clock rate */
+	val |= (esel ? EP93XX_SYSCON_CLKDIV_ESEL : 0) |
+		(psel ? EP93XX_SYSCON_CLKDIV_PSEL : 0) |
+		(pdiv << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | div;
+	ep93xx_syscon_swlocked_write(val, clk->enable_reg);
+	return 0;
+}
+
 int clk_set_rate(struct clk *clk, unsigned long rate)
 {
 	if (clk->set_rate)
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 16b92c37ec9..f7ebed942f6 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -30,6 +30,7 @@
 #include <linux/i2c-gpio.h>
 
 #include <mach/hardware.h>
+#include <mach/fb.h>
 
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
@@ -682,6 +683,37 @@ void ep93xx_pwm_release_gpio(struct platform_device *pdev)
 EXPORT_SYMBOL(ep93xx_pwm_release_gpio);
 
 
+/*************************************************************************
+ * EP93xx video peripheral handling
+ *************************************************************************/
+static struct ep93xxfb_mach_info ep93xxfb_data;
+
+static struct resource ep93xx_fb_resource[] = {
+	{
+		.start		= EP93XX_RASTER_PHYS_BASE,
+		.end		= EP93XX_RASTER_PHYS_BASE + 0x800 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device ep93xx_fb_device = {
+	.name			= "ep93xx-fb",
+	.id			= -1,
+	.dev			= {
+		.platform_data	= &ep93xxfb_data,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.dma_mask		= &ep93xx_fb_device.dev.coherent_dma_mask,
+	},
+	.num_resources		= ARRAY_SIZE(ep93xx_fb_resource),
+	.resource		= ep93xx_fb_resource,
+};
+
+void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data)
+{
+	ep93xxfb_data = *data;
+	platform_device_register(&ep93xx_fb_device);
+}
+
 extern void ep93xx_gpio_init(void);
 
 void __init ep93xx_init_devices(void)
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index ea78e908fc8..0fbf87b1633 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -70,6 +70,7 @@
 #define EP93XX_USB_PHYS_BASE		(EP93XX_AHB_PHYS_BASE + 0x00020000)
 #define EP93XX_USB_BASE			EP93XX_AHB_IOMEM(0x00020000)
 
+#define EP93XX_RASTER_PHYS_BASE		(EP93XX_AHB_PHYS_BASE + 0x00030000)
 #define EP93XX_RASTER_BASE		EP93XX_AHB_IOMEM(0x00030000)
 
 #define EP93XX_GRAPHICS_ACCEL_BASE	EP93XX_AHB_IOMEM(0x00040000)
@@ -207,6 +208,11 @@
 #define EP93XX_SYSCON_DEVCFG_ADCPD	(1<<2)
 #define EP93XX_SYSCON_DEVCFG_KEYS	(1<<1)
 #define EP93XX_SYSCON_DEVCFG_SHENA	(1<<0)
+#define EP93XX_SYSCON_VIDCLKDIV		EP93XX_SYSCON_REG(0x84)
+#define EP93XX_SYSCON_CLKDIV_ENABLE	(1<<15)
+#define EP93XX_SYSCON_CLKDIV_ESEL	(1<<14)
+#define EP93XX_SYSCON_CLKDIV_PSEL	(1<<13)
+#define EP93XX_SYSCON_CLKDIV_PDIV_SHIFT	8
 #define EP93XX_SYSCON_KEYTCHCLKDIV	EP93XX_SYSCON_REG(0x90)
 #define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN	(1<<31)
 #define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV	(1<<16)
diff --git a/arch/arm/mach-ep93xx/include/mach/fb.h b/arch/arm/mach-ep93xx/include/mach/fb.h
new file mode 100644
index 00000000000..d5ae11d7c45
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/fb.h
@@ -0,0 +1,56 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/fb.h
+ */
+
+#ifndef __ASM_ARCH_EP93XXFB_H
+#define __ASM_ARCH_EP93XXFB_H
+
+struct platform_device;
+struct fb_videomode;
+struct fb_info;
+
+#define EP93XXFB_USE_MODEDB		0
+
+/* VideoAttributes flags */
+#define EP93XXFB_STATE_MACHINE_ENABLE	(1 << 0)
+#define EP93XXFB_PIXEL_CLOCK_ENABLE	(1 << 1)
+#define EP93XXFB_VSYNC_ENABLE		(1 << 2)
+#define EP93XXFB_PIXEL_DATA_ENABLE	(1 << 3)
+#define EP93XXFB_COMPOSITE_SYNC		(1 << 4)
+#define EP93XXFB_SYNC_VERT_HIGH		(1 << 5)
+#define EP93XXFB_SYNC_HORIZ_HIGH	(1 << 6)
+#define EP93XXFB_SYNC_BLANK_HIGH	(1 << 7)
+#define EP93XXFB_PCLK_FALLING		(1 << 8)
+#define EP93XXFB_ENABLE_AC		(1 << 9)
+#define EP93XXFB_ENABLE_LCD		(1 << 10)
+#define EP93XXFB_ENABLE_CCIR		(1 << 12)
+#define EP93XXFB_USE_PARALLEL_INTERFACE	(1 << 13)
+#define EP93XXFB_ENABLE_INTERRUPT	(1 << 14)
+#define EP93XXFB_USB_INTERLACE		(1 << 16)
+#define EP93XXFB_USE_EQUALIZATION	(1 << 17)
+#define EP93XXFB_USE_DOUBLE_HORZ	(1 << 18)
+#define EP93XXFB_USE_DOUBLE_VERT	(1 << 19)
+#define EP93XXFB_USE_BLANK_PIXEL	(1 << 20)
+#define EP93XXFB_USE_SDCSN0		(0 << 21)
+#define EP93XXFB_USE_SDCSN1		(1 << 21)
+#define EP93XXFB_USE_SDCSN2		(2 << 21)
+#define EP93XXFB_USE_SDCSN3		(3 << 21)
+
+#define EP93XXFB_ENABLE			(EP93XXFB_STATE_MACHINE_ENABLE	| \
+					 EP93XXFB_PIXEL_CLOCK_ENABLE	| \
+					 EP93XXFB_VSYNC_ENABLE		| \
+					 EP93XXFB_PIXEL_DATA_ENABLE)
+
+struct ep93xxfb_mach_info {
+	unsigned int			num_modes;
+	const struct fb_videomode	*modes;
+	const struct fb_videomode	*default_mode;
+	int				bpp;
+	unsigned int			flags;
+
+	int	(*setup)(struct platform_device *pdev);
+	void	(*teardown)(struct platform_device *pdev);
+	void	(*blank)(int blank_mode, struct fb_info *info);
+};
+
+#endif /* __ASM_ARCH_EP93XXFB_H */
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 5f5fa6574d3..01a0f0838e5 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -6,6 +6,7 @@
 
 struct i2c_board_info;
 struct platform_device;
+struct ep93xxfb_mach_info;
 
 struct ep93xx_eth_data
 {
@@ -33,6 +34,7 @@ static inline void ep93xx_devcfg_clear_bits(unsigned int bits)
 
 void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
 void ep93xx_register_i2c(struct i2c_board_info *devices, int num);
+void ep93xx_register_fb(struct ep93xxfb_mach_info *data);
 void ep93xx_register_pwm(int pwm0, int pwm1);
 int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);
 void ep93xx_pwm_release_gpio(struct platform_device *pdev);
-- 
cgit v1.2.3


From 0748bd01773395003208996c4c0b3f80caf80976 Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu, 24 Sep 2009 09:34:46 -0600
Subject: cpumask: remove arch_send_call_function_ipi

Now everyone is converted to arch_send_call_function_ipi_mask, remove
the shim and the #defines.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 arch/arm/include/asm/smp.h | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index a06e735b262..e0d763be184 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -93,7 +93,6 @@ extern void platform_cpu_enable(unsigned int cpu);
 
 extern void arch_send_call_function_single_ipi(int cpu);
 extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
-#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
 
 /*
  * show local interrupt info
-- 
cgit v1.2.3


From 56f8ba83a52b9f9e3711eff8e54168ac14aa288f Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu, 24 Sep 2009 09:34:49 -0600
Subject: cpumask: use mm_cpumask() wrapper: arm

Makes code futureproof against the impending change to mm->cpu_vm_mask.

It's also a chance to use the new cpumask_ ops which take a pointer
(the older ones are deprecated, but there's no hurry for arch code).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 arch/arm/include/asm/cacheflush.h  |  8 ++++----
 arch/arm/include/asm/mmu_context.h |  7 ++++---
 arch/arm/include/asm/tlbflush.h    |  4 ++--
 arch/arm/kernel/smp.c              | 10 +++++-----
 arch/arm/mm/context.c              |  2 +-
 arch/arm/mm/flush.c                | 10 +++++-----
 6 files changed, 21 insertions(+), 20 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index 1a711ea8418..fd03fb63a33 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -334,14 +334,14 @@ static inline void outer_flush_range(unsigned long start, unsigned long end)
 #ifndef CONFIG_CPU_CACHE_VIPT
 static inline void flush_cache_mm(struct mm_struct *mm)
 {
-	if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask))
+	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm)))
 		__cpuc_flush_user_all();
 }
 
 static inline void
 flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
 {
-	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask))
+	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm)))
 		__cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end),
 					vma->vm_flags);
 }
@@ -349,7 +349,7 @@ flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long
 static inline void
 flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
 {
-	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
 		unsigned long addr = user_addr & PAGE_MASK;
 		__cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags);
 	}
@@ -360,7 +360,7 @@ flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
 			 unsigned long uaddr, void *kaddr,
 			 unsigned long len, int write)
 {
-	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
 		unsigned long addr = (unsigned long)kaddr;
 		__cpuc_coherent_kern_range(addr, addr + len);
 	}
diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h
index bcdb9291ef0..de6cefb329d 100644
--- a/arch/arm/include/asm/mmu_context.h
+++ b/arch/arm/include/asm/mmu_context.h
@@ -103,14 +103,15 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next,
 
 #ifdef CONFIG_SMP
 	/* check for possible thread migration */
-	if (!cpus_empty(next->cpu_vm_mask) && !cpu_isset(cpu, next->cpu_vm_mask))
+	if (!cpumask_empty(mm_cpumask(next)) &&
+	    !cpumask_test_cpu(cpu, mm_cpumask(next)))
 		__flush_icache_all();
 #endif
-	if (!cpu_test_and_set(cpu, next->cpu_vm_mask) || prev != next) {
+	if (!cpumask_test_and_set_cpu(cpu, mm_cpumask(next)) || prev != next) {
 		check_context(next);
 		cpu_switch_mm(next->pgd, next);
 		if (cache_is_vivt())
-			cpu_clear(cpu, prev->cpu_vm_mask);
+			cpumask_clear_cpu(cpu, mm_cpumask(prev));
 	}
 #endif
 }
diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
index c964f3fc3bc..a45ab5dd825 100644
--- a/arch/arm/include/asm/tlbflush.h
+++ b/arch/arm/include/asm/tlbflush.h
@@ -350,7 +350,7 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
 	if (tlb_flag(TLB_WB))
 		dsb();
 
-	if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask)) {
+	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm))) {
 		if (tlb_flag(TLB_V3_FULL))
 			asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc");
 		if (tlb_flag(TLB_V4_U_FULL))
@@ -388,7 +388,7 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 	if (tlb_flag(TLB_WB))
 		dsb();
 
-	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
 		if (tlb_flag(TLB_V3_PAGE))
 			asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (uaddr) : "cc");
 		if (tlb_flag(TLB_V4_U_PAGE))
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index de885fd256c..e0d32770bb3 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -189,7 +189,7 @@ int __cpuexit __cpu_disable(void)
 	read_lock(&tasklist_lock);
 	for_each_process(p) {
 		if (p->mm)
-			cpu_clear(cpu, p->mm->cpu_vm_mask);
+			cpumask_clear_cpu(cpu, mm_cpumask(p->mm));
 	}
 	read_unlock(&tasklist_lock);
 
@@ -257,7 +257,7 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 	atomic_inc(&mm->mm_users);
 	atomic_inc(&mm->mm_count);
 	current->active_mm = mm;
-	cpu_set(cpu, mm->cpu_vm_mask);
+	cpumask_set_cpu(cpu, mm_cpumask(mm));
 	cpu_switch_mm(mm->pgd, mm);
 	enter_lazy_tlb(mm, current);
 	local_flush_tlb_all();
@@ -643,7 +643,7 @@ void flush_tlb_all(void)
 void flush_tlb_mm(struct mm_struct *mm)
 {
 	if (tlb_ops_need_broadcast())
-		on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, &mm->cpu_vm_mask);
+		on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, mm_cpumask(mm));
 	else
 		local_flush_tlb_mm(mm);
 }
@@ -654,7 +654,7 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 		struct tlb_args ta;
 		ta.ta_vma = vma;
 		ta.ta_start = uaddr;
-		on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, &vma->vm_mm->cpu_vm_mask);
+		on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, mm_cpumask(vma->vm_mm));
 	} else
 		local_flush_tlb_page(vma, uaddr);
 }
@@ -677,7 +677,7 @@ void flush_tlb_range(struct vm_area_struct *vma,
 		ta.ta_vma = vma;
 		ta.ta_start = start;
 		ta.ta_end = end;
-		on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, &vma->vm_mm->cpu_vm_mask);
+		on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, mm_cpumask(vma->vm_mm));
 	} else
 		local_flush_tlb_range(vma, start, end);
 }
diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c
index fc84fcc7438..6bda76a4319 100644
--- a/arch/arm/mm/context.c
+++ b/arch/arm/mm/context.c
@@ -59,6 +59,6 @@ void __new_context(struct mm_struct *mm)
 	}
 	spin_unlock(&cpu_asid_lock);
 
-	mm->cpu_vm_mask = cpumask_of_cpu(smp_processor_id());
+	cpumask_copy(mm_cpumask(mm), cpumask_of(smp_processor_id()));
 	mm->context.id = asid;
 }
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index 575f3ad722e..b27942909b2 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -50,7 +50,7 @@ static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr)
 void flush_cache_mm(struct mm_struct *mm)
 {
 	if (cache_is_vivt()) {
-		if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask))
+		if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm)))
 			__cpuc_flush_user_all();
 		return;
 	}
@@ -73,7 +73,7 @@ void flush_cache_mm(struct mm_struct *mm)
 void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
 {
 	if (cache_is_vivt()) {
-		if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask))
+		if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm)))
 			__cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end),
 						vma->vm_flags);
 		return;
@@ -97,7 +97,7 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned
 void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
 {
 	if (cache_is_vivt()) {
-		if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+		if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
 			unsigned long addr = user_addr & PAGE_MASK;
 			__cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags);
 		}
@@ -113,7 +113,7 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
 			 unsigned long len, int write)
 {
 	if (cache_is_vivt()) {
-		if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+		if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
 			unsigned long addr = (unsigned long)kaddr;
 			__cpuc_coherent_kern_range(addr, addr + len);
 		}
@@ -126,7 +126,7 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
 	}
 
 	/* VIPT non-aliasing cache */
-	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask) &&
+	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm)) &&
 	    vma->vm_flags & VM_EXEC) {
 		unsigned long addr = (unsigned long)kaddr;
 		/* only flushing the kernel mapping on non-aliasing VIPT */
-- 
cgit v1.2.3


From 2bcd57ab61e7cabed626226a3771617981c11ce1 Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Thu, 24 Sep 2009 04:22:25 +0400
Subject: headers: utsname.h redux

* remove asm/atomic.h inclusion from linux/utsname.h --
   not needed after kref conversion
 * remove linux/utsname.h inclusion from files which do not need it

NOTE: it looks like fs/binfmt_elf.c do not need utsname.h, however
due to some personality stuff it _is_ needed -- cowardly leave ELF-related
headers and files alone.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/kernel/sys_arm.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c
index b3ec641b5cf..78ecaac6520 100644
--- a/arch/arm/kernel/sys_arm.c
+++ b/arch/arm/kernel/sys_arm.c
@@ -25,7 +25,6 @@
 #include <linux/mman.h>
 #include <linux/fs.h>
 #include <linux/file.h>
-#include <linux/utsname.h>
 #include <linux/ipc.h>
 #include <linux/uaccess.h>
 
-- 
cgit v1.2.3


From 5328ae3af18b16df758df1bcb28fb5e1ad56d97a Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Thu, 24 Sep 2009 16:23:04 -0700
Subject: omap: Fix compile for arch/arm/mach-omap2

Patch 941132606c7611246d2034cb7b01f9270c2d1ede split IO_ADDRESS
into OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS except for the omap4
code to avoid merge conflicts with the omap4 code that was queued
earlier.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/serial.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 3a529c77daa..faada9fbfbc 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -110,7 +110,7 @@ static struct plat_serial8250_port serial_platform_data2[] = {
 		.uartclk	= OMAP24XX_BASE_BAUD * 16,
 	}, {
 #ifdef CONFIG_ARCH_OMAP4
-		.membase	= IO_ADDRESS(OMAP_UART4_BASE),
+		.membase	= OMAP2_IO_ADDRESS(OMAP_UART4_BASE),
 		.mapbase	= OMAP_UART4_BASE,
 		.irq		= 70,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -126,7 +126,7 @@ static struct plat_serial8250_port serial_platform_data2[] = {
 #ifdef CONFIG_ARCH_OMAP4
 static struct plat_serial8250_port serial_platform_data3[] = {
 	{
-		.membase	= IO_ADDRESS(OMAP_UART4_BASE),
+		.membase	= OMAP2_IO_ADDRESS(OMAP_UART4_BASE),
 		.mapbase	= OMAP_UART4_BASE,
 		.irq		= 70,
 		.flags		= UPF_BOOT_AUTOCONF,
-- 
cgit v1.2.3


From af41a12f09cf78498f63d5cd726d604739671001 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Thu, 24 Sep 2009 16:23:05 -0700
Subject: omap: Fix mcspi compile for 2420

Commit 7869c0b9ed44404bbc675ef76f8ccb3be5496f39 added support for
additional McSPI ports. Unfortunately that broke compile for 2420.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/devices.c | 65 ++++++++++++++++++++++++++++++++-----------
 1 file changed, 48 insertions(+), 17 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index bcfcfc7fdb9..faf7a1e0c52 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -355,29 +355,60 @@ static struct platform_device omap2_mcspi4 = {
 };
 #endif
 
-static void omap_init_mcspi(void)
+#ifdef CONFIG_ARCH_OMAP4
+static inline void omap4_mcspi_fixup(void)
 {
-	if (cpu_is_omap44xx()) {
-		omap2_mcspi1_resources[0].start	= OMAP4_MCSPI1_BASE;
-		omap2_mcspi1_resources[0].end	= OMAP4_MCSPI1_BASE + 0xff;
-		omap2_mcspi2_resources[0].start	= OMAP4_MCSPI2_BASE;
-		omap2_mcspi2_resources[0].end	= OMAP4_MCSPI2_BASE + 0xff;
-		omap2_mcspi3_resources[0].start	= OMAP4_MCSPI3_BASE;
-		omap2_mcspi3_resources[0].end	= OMAP4_MCSPI3_BASE + 0xff;
-		omap2_mcspi4_resources[0].start	= OMAP4_MCSPI4_BASE;
-		omap2_mcspi4_resources[0].end	= OMAP4_MCSPI4_BASE + 0xff;
-	}
-	platform_device_register(&omap2_mcspi1);
-	platform_device_register(&omap2_mcspi2);
+	omap2_mcspi1_resources[0].start	= OMAP4_MCSPI1_BASE;
+	omap2_mcspi1_resources[0].end	= OMAP4_MCSPI1_BASE + 0xff;
+	omap2_mcspi2_resources[0].start	= OMAP4_MCSPI2_BASE;
+	omap2_mcspi2_resources[0].end	= OMAP4_MCSPI2_BASE + 0xff;
+	omap2_mcspi3_resources[0].start	= OMAP4_MCSPI3_BASE;
+	omap2_mcspi3_resources[0].end	= OMAP4_MCSPI3_BASE + 0xff;
+	omap2_mcspi4_resources[0].start	= OMAP4_MCSPI4_BASE;
+	omap2_mcspi4_resources[0].end	= OMAP4_MCSPI4_BASE + 0xff;
+}
+#else
+static inline void omap4_mcspi_fixup(void)
+{
+}
+#endif
+
 #if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
 	defined(CONFIG_ARCH_OMAP4)
-	if (cpu_is_omap2430() || cpu_is_omap343x() || cpu_is_omap44xx())
-		platform_device_register(&omap2_mcspi3);
+static inline void omap2_mcspi3_init(void)
+{
+	platform_device_register(&omap2_mcspi3);
+}
+#else
+static inline void omap2_mcspi3_init(void)
+{
+}
 #endif
+
 #if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
-	if (cpu_is_omap343x() || cpu_is_omap44xx())
-		platform_device_register(&omap2_mcspi4);
+static inline void omap2_mcspi4_init(void)
+{
+	platform_device_register(&omap2_mcspi4);
+}
+#else
+static inline void omap2_mcspi4_init(void)
+{
+}
 #endif
+
+static void omap_init_mcspi(void)
+{
+	if (cpu_is_omap44xx())
+		omap4_mcspi_fixup();
+
+	platform_device_register(&omap2_mcspi1);
+	platform_device_register(&omap2_mcspi2);
+
+	if (cpu_is_omap2430() || cpu_is_omap343x() || cpu_is_omap44xx())
+		omap2_mcspi3_init();
+
+	if (cpu_is_omap343x() || cpu_is_omap44xx())
+		omap2_mcspi4_init();
 }
 
 #else
-- 
cgit v1.2.3


From 61f04ee83c768c556168b09d71f0dc87b4a6090a Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Thu, 24 Sep 2009 16:23:07 -0700
Subject: omap: Fix 44xx compile

Looks like these patches were not tested that well..

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/cm4xxx.c | 17 ++---------------
 arch/arm/mach-omap2/io.c     |  4 ++--
 arch/arm/mach-omap2/serial.c |  2 +-
 3 files changed, 5 insertions(+), 18 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/cm4xxx.c b/arch/arm/mach-omap2/cm4xxx.c
index e4ebd6d5313..4af76bb1003 100644
--- a/arch/arm/mach-omap2/cm4xxx.c
+++ b/arch/arm/mach-omap2/cm4xxx.c
@@ -22,7 +22,6 @@
 #include <asm/atomic.h>
 
 #include "cm.h"
-#include "cm-regbits-4xxx.h"
 
 /* XXX move this to cm.h */
 /* MAX_MODULE_READY_TIME: max milliseconds for module to leave idle */
@@ -50,19 +49,7 @@
  */
 int omap4_cm_wait_idlest_ready(u32 prcm_mod, u8 prcm_dev_offs)
 {
-	int i = 0;
-	u8 cm_id;
-	u16 prcm_mod_offs;
-	u32 mask = OMAP4_PRCM_CM_CLKCTRL_IDLEST_MASK;
-
-	cm_id = prcm_mod >> OMAP4_PRCM_MOD_CM_ID_SHIFT;
-	prcm_mod_offs = prcm_mod & OMAP4_PRCM_MOD_OFFS_MASK;
-
-	while (((omap4_cm_read_mod_reg(cm_id, prcm_mod_offs, prcm_dev_offs,
-				       OMAP4_CM_CLKCTRL_DREG) & mask) != 0) &&
-	       (i++ < MAX_MODULE_READY_TIME))
-		udelay(1);
-
-	return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
+	/* FIXME: Add clock manager related code */
+	return 0;
 }
 
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 7574b6f20e8..e3a3bad1d84 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -294,10 +294,10 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 	else if (cpu_is_omap34xx())
 		hwmods = omap34xx_hwmods;
 
-	omap_hwmod_init(hwmods);
-	omap2_mux_init();
 #ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */
 	/* The OPP tables have to be registered before a clk init */
+	omap_hwmod_init(hwmods);
+	omap2_mux_init();
 	omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps);
 	pwrdm_init(powerdomains_omap);
 	clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index faada9fbfbc..ae2186892c8 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -579,7 +579,7 @@ static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = {
 	{
 		.pdev = {
 			.name			= "serial8250",
-			.id			= 3
+			.id			= 3,
 			.dev			= {
 				.platform_data	= serial_platform_data3,
 			},
-- 
cgit v1.2.3


From 41a03c539c6e3cc772fc15a827ea2aa040c9848d Mon Sep 17 00:00:00 2001
From: Ajay Kumar Gupta <ajay.gupta@ti.com>
Date: Thu, 24 Sep 2009 16:23:08 -0700
Subject: omap: Add missing mux pin for EHCI phy reset line

GPIO135 is used as EHCI (port2) phy reset pin on Multi Media Daughter card
connected to OMAP3EVM.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/mux.c             | 2 ++
 arch/arm/plat-omap/include/mach/mux.h | 1 +
 2 files changed, 3 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 2daa595aaff..339ba80ee68 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -472,6 +472,8 @@ MUX_CFG_34XX("G25_34XX_GPIO86_OUT", 0x0fc,
 		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
 MUX_CFG_34XX("AG4_34XX_GPIO134_OUT", 0x160,
 		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AF4_34XX_GPIO135_OUT", 0x162,
+		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
 MUX_CFG_34XX("AE4_34XX_GPIO136_OUT", 0x164,
 		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
 MUX_CFG_34XX("AF6_34XX_GPIO140_UP", 0x16c,
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
index 98dfab651df..4bcf8a59d8c 100644
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -846,6 +846,7 @@ enum omap34xx_index {
 	L8_34XX_GPIO63,
 	G25_34XX_GPIO86_OUT,
 	AG4_34XX_GPIO134_OUT,
+	AF4_34XX_GPIO135_OUT,
 	AE4_34XX_GPIO136_OUT,
 	AF6_34XX_GPIO140_UP,
 	AE6_34XX_GPIO141,
-- 
cgit v1.2.3


From 1ffe627dcfce820b316ee520c58fca54550a18ee Mon Sep 17 00:00:00 2001
From: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Date: Thu, 24 Sep 2009 16:23:09 -0700
Subject: omap: mailbox: Execute softreset at startup

The softreset at startup is introduced as TRM describes and also some
register bit definitions are added instead of magic number.

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/mailbox.c | 30 +++++++++++++++++++++++++-----
 1 file changed, 25 insertions(+), 5 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 6f71f3730c9..5bf9a2fdb68 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -30,6 +30,14 @@
 #define MAILBOX_IRQ_NEWMSG(u)		(1 << (2 * (u)))
 #define MAILBOX_IRQ_NOTFULL(u)		(1 << (2 * (u) + 1))
 
+/* SYSCONFIG: register bit definition */
+#define AUTOIDLE	(1 << 0)
+#define SOFTRESET	(1 << 1)
+#define SMARTIDLE	(2 << 3)
+
+/* SYSSTATUS: register bit definition */
+#define RESETDONE	(1 << 0)
+
 #define MBOX_REG_SIZE			0x120
 #define MBOX_NR_REGS			(MBOX_REG_SIZE / sizeof(u32))
 
@@ -69,21 +77,33 @@ static inline void mbox_write_reg(u32 val, size_t ofs)
 /* Mailbox H/W preparations */
 static int omap2_mbox_startup(struct omap_mbox *mbox)
 {
-	unsigned int l;
+	u32 l;
+	unsigned long timeout;
 
 	mbox_ick_handle = clk_get(NULL, "mailboxes_ick");
 	if (IS_ERR(mbox_ick_handle)) {
-		printk("Could not get mailboxes_ick\n");
+		pr_err("Can't get mailboxes_ick\n");
 		return -ENODEV;
 	}
 	clk_enable(mbox_ick_handle);
 
+	mbox_write_reg(SOFTRESET, MAILBOX_SYSCONFIG);
+	timeout = jiffies + msecs_to_jiffies(20);
+	do {
+		l = mbox_read_reg(MAILBOX_SYSSTATUS);
+		if (l & RESETDONE)
+			break;
+	} while (time_after(jiffies, timeout));
+
+	if (!(l & RESETDONE)) {
+		pr_err("Can't take mmu out of reset\n");
+		return -ENODEV;
+	}
+
 	l = mbox_read_reg(MAILBOX_REVISION);
 	pr_info("omap mailbox rev %d.%d\n", (l & 0xf0) >> 4, (l & 0x0f));
 
-	/* set smart-idle & autoidle */
-	l = mbox_read_reg(MAILBOX_SYSCONFIG);
-	l |= 0x00000011;
+	l = SMARTIDLE | AUTOIDLE;
 	mbox_write_reg(l, MAILBOX_SYSCONFIG);
 
 	omap2_mbox_enable_irq(mbox, IRQ_RX);
-- 
cgit v1.2.3


From 8828880d09e4466ad6b357a31fdd242594c7b111 Mon Sep 17 00:00:00 2001
From: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Date: Thu, 24 Sep 2009 16:23:10 -0700
Subject: omap: mailbox: Flush posted write when acking mailbox irq

The only way to flush posted write to L4 bus is to do a read back
of the same register right after the write.

This seems to be mostly needed in interrupt handlers to avoid
causing spurious interrupts.

The earlier fix has been to mark the L4 bus as strongly ordered
memory, which solves the problem, but causes performance penalties.

Similar to the fix, 03803a71041e3bc3c077f4e7b92f6ceaa9426df3

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/mailbox.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 5bf9a2fdb68..f3fefca5849 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -176,6 +176,9 @@ static void omap2_mbox_ack_irq(struct omap_mbox *mbox,
 	u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit;
 
 	mbox_write_reg(bit, p->irqstatus);
+
+	/* Flush posted write for irq status to avoid spurious interrupts */
+	mbox_read_reg(p->irqstatus);
 }
 
 static int omap2_mbox_is_irq(struct omap_mbox *mbox,
-- 
cgit v1.2.3


From 6716bd06810c64ef0ca4c12462fb2eb2352a7df9 Mon Sep 17 00:00:00 2001
From: Sanjeev Premi <premi@ti.com>
Date: Thu, 24 Sep 2009 16:23:12 -0700
Subject: omap: iovmm: Fix compiler warning

This patch fixes these compiler warnings:

arch/arm/plat-omap/iovmm.c: In function 'vmap_sg':
arch/arm/plat-omap/iovmm.c:202: warning: passing argument 1 of
 'flush_cache_vmap' makes integer from pointer without a cast
arch/arm/plat-omap/iovmm.c:202: warning: passing argument 2 of
 'flush_cache_vmap' makes integer from pointer without a cast
arch/arm/plat-omap/iovmm.c: In function 'sgtable_fill_vmalloc':
arch/arm/plat-omap/iovmm.c:393: warning: passing argument 1 of
 'flush_cache_vmap' makes integer from pointer without a cast
arch/arm/plat-omap/iovmm.c:393: warning: passing argument 2 of
 'flush_cache_vmap' makes integer from pointer without a cast

Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/iovmm.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c
index 6fc52fcbdc0..57f7122a091 100644
--- a/arch/arm/plat-omap/iovmm.c
+++ b/arch/arm/plat-omap/iovmm.c
@@ -199,7 +199,8 @@ static void *vmap_sg(const struct sg_table *sgt)
 		va += bytes;
 	}
 
-	flush_cache_vmap(new->addr, new->addr + total);
+	flush_cache_vmap((unsigned long)new->addr,
+				(unsigned long)(new->addr + total));
 	return new->addr;
 
 err_out:
@@ -390,7 +391,7 @@ static void sgtable_fill_vmalloc(struct sg_table *sgt, void *_va)
 	}
 
 	va_end = _va + PAGE_SIZE * i;
-	flush_cache_vmap(_va, va_end);
+	flush_cache_vmap((unsigned long)_va, (unsigned long)va_end);
 }
 
 static inline void sgtable_drain_vmalloc(struct sg_table *sgt)
-- 
cgit v1.2.3


From f5ee2fc7931c692da7315d65675399f2e46af1e7 Mon Sep 17 00:00:00 2001
From: Angelo Arrifano <miknix@gmail.com>
Date: Thu, 24 Sep 2009 16:23:13 -0700
Subject: omap: Fix wrong jtag_id for 850

Original message:
The previous value of the jtag_id was set for the omap730.  For the
omap850, this value is different, and this was causing
autodetection to fail.

Reported-by:
  Cory Maccarrone <darkstar6262@gmail.com>
  Angelo Arrifano <miknix@gmail.com>
  Alistair Buxton <a.j.buxton@gmail.com>

Signed-off-by: Angelo Arrifano <miknix@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/id.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c
index 4ef26faf083..e5dcdf764c9 100644
--- a/arch/arm/mach-omap1/id.c
+++ b/arch/arm/mach-omap1/id.c
@@ -38,7 +38,7 @@ static struct omap_id omap_ids[] __initdata = {
 	{ .jtag_id = 0xb574, .die_rev = 0x2, .omap_id = 0x03310315, .type = 0x03100000},
 	{ .jtag_id = 0x355f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300100},
 	{ .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300300},
-	{ .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320500, .type = 0x08500000},
+	{ .jtag_id = 0xb62c, .die_rev = 0x1, .omap_id = 0x03320500, .type = 0x08500000},
 	{ .jtag_id = 0xb470, .die_rev = 0x0, .omap_id = 0x03310100, .type = 0x15100000},
 	{ .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x16100000},
 	{ .jtag_id = 0xb576, .die_rev = 0x2, .omap_id = 0x03320100, .type = 0x16110000},
-- 
cgit v1.2.3


From 501e9bd5ff00ea726e91cef7df61f889bdec2105 Mon Sep 17 00:00:00 2001
From: Angelo Arrifano <miknix@gmail.com>
Date: Thu, 24 Sep 2009 16:23:14 -0700
Subject: omap: Fix a OMAP_MPUIO_VBASE typo for 850

This was crashing omap850 devices.

Reported-by:
  Alistair Buxton <a.j.buxton@gmail.com>

Signed-off-by: Angelo Arrifano <miknix@gmail.com>
Signed-obb-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/gpio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 693839c89ad..71ebd7fcfea 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -250,7 +250,7 @@ static struct gpio_bank gpio_bank_730[7] = {
 
 #ifdef CONFIG_ARCH_OMAP850
 static struct gpio_bank gpio_bank_850[7] = {
-	{ OMAP1_MPUIO_BASE,     INT_850_MPUIO,	    IH_MPUIO_BASE,	METHOD_MPUIO },
+	{ OMAP1_MPUIO_VBASE,     INT_850_MPUIO,	    IH_MPUIO_BASE,	METHOD_MPUIO },
 	{ OMAP850_GPIO1_BASE,  INT_850_GPIO_BANK1,  IH_GPIO_BASE,	METHOD_GPIO_850 },
 	{ OMAP850_GPIO2_BASE,  INT_850_GPIO_BANK2,  IH_GPIO_BASE + 32,	METHOD_GPIO_850 },
 	{ OMAP850_GPIO3_BASE,  INT_850_GPIO_BANK3,  IH_GPIO_BASE + 64,	METHOD_GPIO_850 },
-- 
cgit v1.2.3


From 4f5433324d1e29cf234d5b1b14782c0fc2948298 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Thu, 24 Sep 2009 16:23:16 -0700
Subject: omap: Fix matrix_keymap_data usage

Otherwise we'll get compile errors like:

arch/arm/plat-omap/include/mach/keypad.h:38:1: warning: "KEY" redefined
arch/arm/plat-omap/include/mach/keypad.h:39:1: warning: "PERSISTENT_KEY" redefined
...

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-3430sdp.c          | 10 +++++++---
 arch/arm/mach-omap2/board-ldp.c              | 10 +++++++---
 arch/arm/mach-omap2/board-omap3evm.c         | 10 +++++++---
 arch/arm/mach-omap2/board-omap3pandora.c     | 10 +++++++---
 arch/arm/mach-omap2/board-rx51-peripherals.c | 10 +++++++---
 arch/arm/mach-omap2/board-zoom2.c            | 10 +++++++---
 arch/arm/plat-omap/include/mach/keypad.h     |  5 ++---
 7 files changed, 44 insertions(+), 21 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index bd57ec76dc5..efaf053eba8 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -54,7 +54,7 @@
 
 #define TWL4030_MSECURE_GPIO 22
 
-static int sdp3430_keymap[] = {
+static int board_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_RIGHT),
 	KEY(0, 2, KEY_A),
@@ -88,11 +88,15 @@ static int sdp3430_keymap[] = {
 	0
 };
 
+static struct matrix_keymap_data board_map_data = {
+	.keymap			= board_keymap,
+	.keymap_size		= ARRAY_SIZE(board_keymap),
+};
+
 static struct twl4030_keypad_data sdp3430_kp_data = {
+	.keymap_data	= &board_map_data,
 	.rows		= 5,
 	.cols		= 6,
-	.keymap		= sdp3430_keymap,
-	.keymapsize	= ARRAY_SIZE(sdp3430_keymap),
 	.rep		= 1,
 };
 
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index ec6854cbdd9..d110a7fdfbd 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -80,7 +80,7 @@ static struct platform_device ldp_smsc911x_device = {
 	},
 };
 
-static int ldp_twl4030_keymap[] = {
+static int board_keymap[] = {
 	KEY(0, 0, KEY_1),
 	KEY(1, 0, KEY_2),
 	KEY(2, 0, KEY_3),
@@ -101,11 +101,15 @@ static int ldp_twl4030_keymap[] = {
 	0
 };
 
+static struct matrix_keymap_data board_map_data = {
+	.keymap			= board_keymap,
+	.keymap_size		= ARRAY_SIZE(board_keymap),
+};
+
 static struct twl4030_keypad_data ldp_kp_twl4030_data = {
+	.keymap_data	= &board_map_data,
 	.rows		= 6,
 	.cols		= 6,
-	.keymap		= ldp_twl4030_keymap,
-	.keymapsize	= ARRAY_SIZE(ldp_twl4030_keymap),
 	.rep		= 1,
 };
 
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index d50b9be9058..e4ec0c59121 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -159,7 +159,7 @@ static struct twl4030_usb_data omap3evm_usb_data = {
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
 
-static int omap3evm_keymap[] = {
+static int board_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_RIGHT),
 	KEY(0, 2, KEY_A),
@@ -178,11 +178,15 @@ static int omap3evm_keymap[] = {
 	KEY(3, 3, KEY_P)
 };
 
+static struct matrix_keymap_data board_map_data = {
+	.keymap			= board_keymap,
+	.keymap_size		= ARRAY_SIZE(board_keymap),
+};
+
 static struct twl4030_keypad_data omap3evm_kp_data = {
+	.keymap_data	= &board_map_data,
 	.rows		= 4,
 	.cols		= 4,
-	.keymap		= omap3evm_keymap,
-	.keymapsize	= ARRAY_SIZE(omap3evm_keymap),
 	.rep		= 1,
 };
 
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index b43f6e36b6d..7f6bf8772af 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -133,7 +133,7 @@ static void __init pandora_keys_gpio_init(void)
 	omap_set_gpio_debounce_time(32 * 5, GPIO_DEBOUNCE_TIME);
 }
 
-static int pandora_keypad_map[] = {
+static int board_keymap[] = {
 	/* col, row, code */
 	KEY(0, 0, KEY_9),
 	KEY(0, 1, KEY_0),
@@ -180,11 +180,15 @@ static int pandora_keypad_map[] = {
 	KEY(5, 2, KEY_FN),
 };
 
+static struct matrix_keymap_data board_map_data = {
+	.keymap			= board_keymap,
+	.keymap_size		= ARRAY_SIZE(board_keymap),
+};
+
 static struct twl4030_keypad_data pandora_kp_data = {
+	.keymap_data	= &board_map_data,
 	.rows		= 8,
 	.cols		= 6,
-	.keymap		= pandora_keypad_map,
-	.keymapsize	= ARRAY_SIZE(pandora_keypad_map),
 	.rep		= 1,
 };
 
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index e6e8290b782..b45ad312c58 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -36,7 +36,7 @@
 #define SYSTEM_REV_B_USES_VAUX3	0x1699
 #define SYSTEM_REV_S_USES_VAUX3 0x8
 
-static int rx51_keymap[] = {
+static int board_keymap[] = {
 	KEY(0, 0, KEY_Q),
 	KEY(0, 1, KEY_W),
 	KEY(0, 2, KEY_E),
@@ -83,11 +83,15 @@ static int rx51_keymap[] = {
 	KEY(0xff, 5, KEY_F10),
 };
 
+static struct matrix_keymap_data board_map_data = {
+	.keymap			= board_keymap,
+	.keymap_size		= ARRAY_SIZE(board_keymap),
+};
+
 static struct twl4030_keypad_data rx51_kp_data = {
+	.keymap_data	= &board_map_data,
 	.rows		= 8,
 	.cols		= 8,
-	.keymap		= rx51_keymap,
-	.keymapsize	= ARRAY_SIZE(rx51_keymap),
 	.rep		= 1,
 };
 
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index 324009edbd5..b7b32208ced 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -27,7 +27,7 @@
 #include "mmc-twl4030.h"
 
 /* Zoom2 has Qwerty keyboard*/
-static int zoom2_twl4030_keymap[] = {
+static int board_keymap[] = {
 	KEY(0, 0, KEY_E),
 	KEY(1, 0, KEY_R),
 	KEY(2, 0, KEY_T),
@@ -82,11 +82,15 @@ static int zoom2_twl4030_keymap[] = {
 	0
 };
 
+static struct matrix_keymap_data board_map_data = {
+	.keymap			= board_keymap,
+	.keymap_size		= ARRAY_SIZE(board_keymap),
+};
+
 static struct twl4030_keypad_data zoom2_kp_twl4030_data = {
+	.keymap_data	= &board_map_data,
 	.rows		= 8,
 	.cols		= 8,
-	.keymap		= zoom2_twl4030_keymap,
-	.keymapsize	= ARRAY_SIZE(zoom2_twl4030_keymap),
 	.rep		= 1,
 };
 
diff --git a/arch/arm/plat-omap/include/mach/keypad.h b/arch/arm/plat-omap/include/mach/keypad.h
index 45ea3ae3c99..d91b9be334f 100644
--- a/arch/arm/plat-omap/include/mach/keypad.h
+++ b/arch/arm/plat-omap/include/mach/keypad.h
@@ -10,6 +10,8 @@
 #ifndef ASMARM_ARCH_KEYPAD_H
 #define ASMARM_ARCH_KEYPAD_H
 
+#include <linux/input/matrix_keypad.h>
+
 struct omap_kp_platform_data {
 	int rows;
 	int cols;
@@ -35,9 +37,6 @@ struct omap_kp_platform_data {
 
 #define KEY_PERSISTENT		0x00800000
 #define KEYNUM_MASK		0x00EFFFFF
-#define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val))
-#define PERSISTENT_KEY(col, row) (((col) << 28) | ((row) << 24) | \
-						KEY_PERSISTENT)
 
 #endif
 
-- 
cgit v1.2.3


From 44e74840d668d23b65e22772828e2600641b6ab0 Mon Sep 17 00:00:00 2001
From: Jarkko Nikula <jhnikula@gmail.com>
Date: Thu, 24 Sep 2009 16:23:17 -0700
Subject: omap: Fix MMC gpio_wp for BeagleBoard C2 and above

Earlier BeagleBoards were using pad AH8 muxed to GPIO29 for MMC write-protect.
However, this signal has been changed to pad AG9 in board revision C2.

Fix this by adding mux configuration for pad AG9, runtime check for board
revisions and set the gpio number and pad muxing accordingly.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-omap3beagle.c | 7 ++++++-
 arch/arm/mach-omap2/mux.c               | 2 ++
 arch/arm/plat-omap/include/mach/mux.h   | 1 +
 3 files changed, 9 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 500c9956876..70df6b4dbcd 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -139,8 +139,13 @@ static struct gpio_led gpio_leds[];
 static int beagle_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
+	if (system_rev >= 0x20 && system_rev <= 0x34301000) {
+		omap_cfg_reg(AG9_34XX_GPIO23);
+		mmc[0].gpio_wp = 23;
+	} else {
+		omap_cfg_reg(AH8_34XX_GPIO29);
+	}
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
-	omap_cfg_reg(AH8_34XX_GPIO29);
 	mmc[0].gpio_cd = gpio + 0;
 	twl4030_mmc_init(mmc);
 
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 339ba80ee68..b5fac32aae7 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -460,6 +460,8 @@ MUX_CFG_34XX("AF26_34XX_GPIO0", 0x1e0,
 		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
 MUX_CFG_34XX("AF22_34XX_GPIO9", 0xa18,
 		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
+MUX_CFG_34XX("AG9_34XX_GPIO23", 0x5ee,
+		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
 MUX_CFG_34XX("AH8_34XX_GPIO29", 0x5fa,
 		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
 MUX_CFG_34XX("U8_34XX_GPIO54_OUT", 0x0b4,
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
index 4bcf8a59d8c..0f49d2d563d 100644
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -840,6 +840,7 @@ enum omap34xx_index {
 	 */
 	AF26_34XX_GPIO0,
 	AF22_34XX_GPIO9,
+	AG9_34XX_GPIO23,
 	AH8_34XX_GPIO29,
 	U8_34XX_GPIO54_OUT,
 	U8_34XX_GPIO54_DOWN,
-- 
cgit v1.2.3


From 9e6ec39becb02bda776eebf12c0677910d54b848 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@fluxnic.net>
Date: Fri, 25 Sep 2009 16:28:02 -0400
Subject: make Linux bootable on ARM again
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Commit 200b812d00 "Clear the exclusive monitor when returning from an
exception" broke the vast majority of ARM systems in the wild which are
still pre ARMv6.  The kernel is crashing on the first occurrence of an
exception due to the removal of the actual return instruction for them.
Let's add it back.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/kernel/entry-header.S | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index e17e3c30d95..ac34c0d9384 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -83,6 +83,8 @@
 	ldr	r0, [sp]
 	strex	r1, r2, [sp]			@ clear the exclusive monitor
 	ldmib	sp, {r1 - pc}^			@ load r1 - pc, cpsr
+#else
+	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
 #endif
 	.endm
 
-- 
cgit v1.2.3


From 055c49d285a151ccb91d63bac6d8621be3db5c93 Mon Sep 17 00:00:00 2001
From: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Date: Mon, 28 Sep 2009 09:21:26 -0700
Subject: omap: Fix wrong condition check in while loop for mailbox and iommu2

It's worked fine so far since reset is done for the first time.

Reported-by: Juha Leppanen <juha_motorsportcom@luukku.com>
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Juha Leppanen <juha_motorsportcom@luukku.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/iommu2.c  | 2 +-
 arch/arm/mach-omap2/mailbox.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c
index 2d9b5cc981c..4a0e1cd5c1f 100644
--- a/arch/arm/mach-omap2/iommu2.c
+++ b/arch/arm/mach-omap2/iommu2.c
@@ -79,7 +79,7 @@ static int omap2_iommu_enable(struct iommu *obj)
 		l = iommu_read_reg(obj, MMU_SYSSTATUS);
 		if (l & MMU_SYS_RESETDONE)
 			break;
-	} while (time_after(jiffies, timeout));
+	} while (!time_after(jiffies, timeout));
 
 	if (!(l & MMU_SYS_RESETDONE)) {
 		dev_err(obj->dev, "can't take mmu out of reset\n");
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index f3fefca5849..c035ad3426d 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -93,7 +93,7 @@ static int omap2_mbox_startup(struct omap_mbox *mbox)
 		l = mbox_read_reg(MAILBOX_SYSSTATUS);
 		if (l & RESETDONE)
 			break;
-	} while (time_after(jiffies, timeout));
+	} while (!time_after(jiffies, timeout));
 
 	if (!(l & RESETDONE)) {
 		pr_err("Can't take mmu out of reset\n");
-- 
cgit v1.2.3


From 7f8b7170cdda6645ed4fec4b2d415bf4cebd7839 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun, 27 Sep 2009 16:50:05 +0100
Subject: ARM: Fix section mismatch warning in Integrator pci_v3

WARNING: vmlinux.o(.text+0xc9d4): Section mismatch in reference from the function pci_v3_scan_bus() to the function .devinit.text:pci_scan_bus_parented()
The function pci_v3_scan_bus() references
the function __devinit pci_scan_bus_parented().
This is often because pci_v3_scan_bus lacks a __devinit
annotation or the annotation of pci_scan_bus_parented is wrong.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
---
 arch/arm/mach-integrator/pci_v3.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index f1d72b22545..901cc205015 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -486,7 +486,7 @@ int __init pci_v3_setup(int nr, struct pci_sys_data *sys)
 	return ret;
 }
 
-struct pci_bus *pci_v3_scan_bus(int nr, struct pci_sys_data *sys)
+struct pci_bus * __init pci_v3_scan_bus(int nr, struct pci_sys_data *sys)
 {
 	return pci_scan_bus(sys->busnr, &pci_v3_ops, sys);
 }
-- 
cgit v1.2.3


From fac28e6df9b5fdfa0cf6b99eae022609dd1108d5 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun, 27 Sep 2009 17:32:47 +0100
Subject: ARM: Fix SA11x0 clocksource warning

8e19608 missed updating SA11x0, and thus:

arch/arm/mach-sa1100/time.c:88: warning: initialization from incompatible pointer type

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-sa1100/time.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index 95d92e8e56a..b9cbb56d6e9 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -77,7 +77,7 @@ static struct clock_event_device ckevt_sa1100_osmr0 = {
 	.set_mode	= sa1100_osmr0_set_mode,
 };
 
-static cycle_t sa1100_read_oscr(void)
+static cycle_t sa1100_read_oscr(struct clocksource *s)
 {
 	return OSCR;
 }
-- 
cgit v1.2.3


From d80ade7b323152672bf66e74ec11c324332f6d1e Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun, 27 Sep 2009 17:40:03 +0100
Subject: ARM: Fix warning: #warning syscall migrate_pages not implemented

We're not implementing this syscall (we're not NUMA) so we might as
well silence this warning.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/unistd.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index 89f7eade20a..7020217fc49 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -456,6 +456,7 @@
  * Unimplemented (or alternatively implemented) syscalls
  */
 #define __IGNORE_fadvise64_64		1
+#define __IGNORE_migrate_pages		1
 
 #endif /* __KERNEL__ */
 #endif /* __ASM_ARM_UNISTD_H */
-- 
cgit v1.2.3


From 041d785f807c8e92e11cc1bd2b3438f7823e63d2 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun, 27 Sep 2009 17:40:42 +0100
Subject: ARM: Fix warning: unused variable 'highmem'

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/mmu.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 4426ee67cec..ce551ec2cb2 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -726,6 +726,8 @@ static void __init sanity_check_meminfo(void)
 			bank->size = VMALLOC_MIN - __va(bank->start);
 		}
 #else
+		bank->highmem = highmem;
+
 		/*
 		 * Check whether this memory bank would entirely overlap
 		 * the vmalloc area.
-- 
cgit v1.2.3


From d5fc79cca2ec8d70200aee3c01cfc95fa35892ea Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Sat, 26 Sep 2009 20:20:06 +0530
Subject: ARM: Remove unused CONFIG SA1100_H3XXX

Removed unused CONFIG SA1100_H3XXX from Kconfig and defconfig

Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Acked-by: Dmitry Artamonow <mad_soft@inbox.ru>
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Cc: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/configs/h3600_defconfig | 1 -
 arch/arm/mach-sa1100/Kconfig     | 5 -----
 2 files changed, 6 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/configs/h3600_defconfig b/arch/arm/configs/h3600_defconfig
index 1502957db2c..f6aed7747d4 100644
--- a/arch/arm/configs/h3600_defconfig
+++ b/arch/arm/configs/h3600_defconfig
@@ -90,7 +90,6 @@ CONFIG_ARCH_SA1100=y
 # CONFIG_SA1100_COLLIE is not set
 # CONFIG_SA1100_H3100 is not set
 CONFIG_SA1100_H3600=y
-CONFIG_SA1100_H3XXX=y
 # CONFIG_SA1100_BADGE4 is not set
 # CONFIG_SA1100_JORNADA720 is not set
 # CONFIG_SA1100_HACKKIT is not set
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index 81ffff7ed49..4e5c07f4e45 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -71,11 +71,6 @@ config SA1100_H3600
 	  <http://www.handhelds.org/Compaq/index.html#iPAQ_H3600>
 	  <http://www.compaq.com/products/handhelds/pocketpc/>
 
-config SA1100_H3XXX
-	bool
-	depends on SA1100_H3100 || SA1100_H3600
-	default y
-
 config SA1100_BADGE4
 	bool "HP Labs BadgePAD 4"
 	select SA1111
-- 
cgit v1.2.3


From 9a0f6b4646a0acaf7f06fd2e02f10f303fe85d8f Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Tue, 22 Sep 2009 18:37:01 +0530
Subject: ARM: includecheck fix: mach-davinci, board-dm365-evm.c

fix the following 'make includecheck' warning:

  arch/arm/mach-davinci/board-dm365-evm.c: mach/common.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-davinci/board-dm365-evm.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index a1d5e7dac74..52dd8046b30 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -35,7 +35,6 @@
 #include <mach/common.h>
 #include <mach/i2c.h>
 #include <mach/serial.h>
-#include <mach/common.h>
 #include <mach/mmc.h>
 #include <mach/nand.h>
 
-- 
cgit v1.2.3


From e616c591405c168f6dc3dfd1221e105adfe49b8d Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun, 27 Sep 2009 20:55:43 +0100
Subject: ARM: Don't allow highmem on SMP platforms without h/w TLB ops
 broadcast

We suffer an unfortunate combination of "features" which makes highmem
support on platforms without hardware TLB maintainence broadcast difficult:

- we need kmap_high_get() support for DMA cache coherence
- this requires kmap_high() to take a spinlock with IRQs disabled
- kmap_high() occasionally calls flush_all_zero_pkmaps() to clear
  out old mappings
- flush_all_zero_pkmaps() calls flush_tlb_kernel_range(), which
  on s/w IPI'd systems eventually calls smp_call_function_many()
- smp_call_function_many() must not be called with IRQs disabled:

WARNING: at kernel/smp.c:380 smp_call_function_many+0xc4/0x240()
Modules linked in:
Backtrace:
[<c00306f0>] (dump_backtrace+0x0/0x108) from [<c0286e6c>] (dump_stack+0x18/0x1c)
 r6:c007cd18 r5:c02ff228 r4:0000017c
[<c0286e54>] (dump_stack+0x0/0x1c) from [<c0053e08>] (warn_slowpath_common+0x50/0x80)
[<c0053db8>] (warn_slowpath_common+0x0/0x80) from [<c0053e50>] (warn_slowpath_null+0x18/0x1c)
 r7:00000003 r6:00000001 r5:c1ff4000 r4:c035fa34
[<c0053e38>] (warn_slowpath_null+0x0/0x1c) from [<c007cd18>] (smp_call_function_many+0xc4/0x240)
[<c007cc54>] (smp_call_function_many+0x0/0x240) from [<c007cec0>] (smp_call_function+0x2c/0x38)
[<c007ce94>] (smp_call_function+0x0/0x38) from [<c005980c>] (on_each_cpu+0x1c/0x38)
[<c00597f0>] (on_each_cpu+0x0/0x38) from [<c0031788>] (flush_tlb_kernel_range+0x50/0x58)
 r6:00000001 r5:00000800 r4:c05f3590
[<c0031738>] (flush_tlb_kernel_range+0x0/0x58) from [<c009c600>] (flush_all_zero_pkmaps+0xc0/0xe8)
[<c009c540>] (flush_all_zero_pkmaps+0x0/0xe8) from [<c009c6b4>] (kmap_high+0x8c/0x1e0)
[<c009c628>] (kmap_high+0x0/0x1e0) from [<c00364a8>] (kmap+0x44/0x5c)
[<c0036464>] (kmap+0x0/0x5c) from [<c0109dfc>] (cramfs_readpage+0x3c/0x194)
[<c0109dc0>] (cramfs_readpage+0x0/0x194) from [<c0090c14>] (__do_page_cache_readahead+0x1f0/0x290)
[<c0090a24>] (__do_page_cache_readahead+0x0/0x290) from [<c0090ce4>] (ra_submit+0x30/0x38)
[<c0090cb4>] (ra_submit+0x0/0x38) from [<c0089384>] (filemap_fault+0x3dc/0x438)
 r4:c1819988
[<c0088fa8>] (filemap_fault+0x0/0x438) from [<c009d21c>] (__do_fault+0x58/0x43c)
[<c009d1c4>] (__do_fault+0x0/0x43c) from [<c009e8cc>] (handle_mm_fault+0x104/0x318)
[<c009e7c8>] (handle_mm_fault+0x0/0x318) from [<c0033c98>] (do_page_fault+0x188/0x1e4)
[<c0033b10>] (do_page_fault+0x0/0x1e4) from [<c0033ddc>] (do_translation_fault+0x7c/0x84)
[<c0033d60>] (do_translation_fault+0x0/0x84) from [<c002b474>] (do_DataAbort+0x40/0xa4)
 r8:c1ff5e20 r7:c0340120 r6:00000805 r5:c1ff5e54 r4:c03400d0
[<c002b434>] (do_DataAbort+0x0/0xa4) from [<c002bcac>] (__dabt_svc+0x4c/0x60)
...

So we disable highmem support on these systems.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/smp_plat.h | 16 ++++++++++++++++
 arch/arm/kernel/smp.c           |  7 +------
 arch/arm/mm/mmu.c               | 37 +++++++++++++++++++++++++++++++++----
 3 files changed, 50 insertions(+), 10 deletions(-)
 create mode 100644 arch/arm/include/asm/smp_plat.h

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/smp_plat.h b/arch/arm/include/asm/smp_plat.h
new file mode 100644
index 00000000000..59303e20084
--- /dev/null
+++ b/arch/arm/include/asm/smp_plat.h
@@ -0,0 +1,16 @@
+/*
+ * ARM specific SMP header, this contains our implementation
+ * details.
+ */
+#ifndef __ASMARM_SMP_PLAT_H
+#define __ASMARM_SMP_PLAT_H
+
+#include <asm/cputype.h>
+
+/* all SMP configurations have the extended CPUID registers */
+static inline int tlb_ops_need_broadcast(void)
+{
+	return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2;
+}
+
+#endif
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index e0d32770bb3..9d015ee5747 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -36,6 +36,7 @@
 #include <asm/tlbflush.h>
 #include <asm/ptrace.h>
 #include <asm/localtimer.h>
+#include <asm/smp_plat.h>
 
 /*
  * as from 2.5, kernels no longer have an init_tasks structure
@@ -586,12 +587,6 @@ struct tlb_args {
 	unsigned long ta_end;
 };
 
-/* all SMP configurations have the extended CPUID registers */
-static inline int tlb_ops_need_broadcast(void)
-{
-	return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2;
-}
-
 static inline void ipi_flush_tlb_all(void *ignored)
 {
 	local_flush_tlb_all();
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index ce551ec2cb2..02243eeccf5 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -21,6 +21,7 @@
 #include <asm/cachetype.h>
 #include <asm/setup.h>
 #include <asm/sizes.h>
+#include <asm/smp_plat.h>
 #include <asm/tlb.h>
 #include <asm/highmem.h>
 
@@ -709,10 +710,6 @@ static void __init sanity_check_meminfo(void)
 			if (meminfo.nr_banks >= NR_BANKS) {
 				printk(KERN_CRIT "NR_BANKS too low, "
 						 "ignoring high memory\n");
-			} else if (cache_is_vipt_aliasing()) {
-				printk(KERN_CRIT "HIGHMEM is not yet supported "
-						 "with VIPT aliasing cache, "
-						 "ignoring high memory\n");
 			} else {
 				memmove(bank + 1, bank,
 					(meminfo.nr_banks - i) * sizeof(*bank));
@@ -756,6 +753,38 @@ static void __init sanity_check_meminfo(void)
 #endif
 		j++;
 	}
+#ifdef CONFIG_HIGHMEM
+	if (highmem) {
+		const char *reason = NULL;
+
+		if (cache_is_vipt_aliasing()) {
+			/*
+			 * Interactions between kmap and other mappings
+			 * make highmem support with aliasing VIPT caches
+			 * rather difficult.
+			 */
+			reason = "with VIPT aliasing cache";
+#ifdef CONFIG_SMP
+		} else if (tlb_ops_need_broadcast()) {
+			/*
+			 * kmap_high needs to occasionally flush TLB entries,
+			 * however, if the TLB entries need to be broadcast
+			 * we may deadlock:
+			 *  kmap_high(irqs off)->flush_all_zero_pkmaps->
+			 *  flush_tlb_kernel_range->smp_call_function_many
+			 *   (must not be called with irqs off)
+			 */
+			reason = "without hardware TLB ops broadcasting";
+#endif
+		}
+		if (reason) {
+			printk(KERN_CRIT "HIGHMEM is not supported %s, ignoring high memory\n",
+				reason);
+			while (j > 0 && meminfo.bank[j - 1].highmem)
+				j--;
+		}
+	}
+#endif
 	meminfo.nr_banks = j;
 }
 
-- 
cgit v1.2.3


From 90140c30a7b8c77e8872a389d48678d78e58789f Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun, 27 Sep 2009 21:04:48 +0100
Subject: ARM: Fix __cpuexit section mismatch warnings

Fix:

WARNING: vmlinux.o(.text+0x247c): Section mismatch in reference from the function cpu_idle() to the function .cpuexit.text:cpu_die()
The function cpu_idle() references a function in an exit section.
Often the function cpu_die() has valid usage outside the exit section
and the fix is to remove the __cpuexit annotation of cpu_die.

WARNING: vmlinux.o(.cpuexit.text+0x3c): Section mismatch in reference from the function cpu_die() to the function .cpuinit.text:secondary_start_kernel()
The function __cpuexit cpu_die() references
a function __cpuinit secondary_start_kernel().
This is often seen when error handling in the exit function
uses functionality in the init path.
The fix is often to remove the __cpuinit annotation of
secondary_start_kernel() so it may be used outside an init section.

Sam says:
> The annotation of cpu_die() is wrong.
> To be annotated __cpuexit the function shall:
> - be used in exit context and only in exit context with HOTPLUG_CPU=n
> - be used outside exit context with HOTPLUG_CPU=y

So, this also means __cpu_disable(), __cpu_die() and twd_timer_stop() are
also wrong.  However, removing __cpuexit from cpu_die() creates:

WARNING: vmlinux.o(.text+0x6834): Section mismatch in reference from the function cpu_die() to the function .cpuinit.text:secondary_start_kernel()
The function cpu_die() references
the function __cpuinit secondary_start_kernel().
This is often because cpu_die lacks a __cpuinit
annotation or the annotation of secondary_start_kernel is wrong.

so fix this using __ref.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
---
 arch/arm/kernel/smp.c     | 6 +++---
 arch/arm/kernel/smp_twd.c | 4 +++-
 2 files changed, 6 insertions(+), 4 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 9d015ee5747..57162af53dc 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -154,7 +154,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
 /*
  * __cpu_disable runs on the processor to be shutdown.
  */
-int __cpuexit __cpu_disable(void)
+int __cpu_disable(void)
 {
 	unsigned int cpu = smp_processor_id();
 	struct task_struct *p;
@@ -201,7 +201,7 @@ int __cpuexit __cpu_disable(void)
  * called on the thread which is asking for a CPU to be shutdown -
  * waits until shutdown has completed, or it is timed out.
  */
-void __cpuexit __cpu_die(unsigned int cpu)
+void __cpu_die(unsigned int cpu)
 {
 	if (!platform_cpu_kill(cpu))
 		printk("CPU%u: unable to kill\n", cpu);
@@ -215,7 +215,7 @@ void __cpuexit __cpu_die(unsigned int cpu)
  * of the other hotplug-cpu capable cores, so presumably coming
  * out of idle fixes this.
  */
-void __cpuexit cpu_die(void)
+void __ref cpu_die(void)
 {
 	unsigned int cpu = smp_processor_id();
 
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index d8c88c633c6..a73a34dccf2 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -166,10 +166,12 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk)
 	clockevents_register_device(clk);
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
 /*
  * take a local timer down
  */
-void __cpuexit twd_timer_stop(void)
+void twd_timer_stop(void)
 {
 	__raw_writel(0, twd_base + TWD_TIMER_CONTROL);
 }
+#endif
-- 
cgit v1.2.3


From aa45ee8fc0ee87c1711b5fe8eb3556d06530c39e Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Mon, 28 Sep 2009 11:41:51 +0100
Subject: ARM: Ensure do_cache_op takes mmap_sem

do_cache_op() uses find_vma() to validate its arguments without holding
any locking.  This means that the VMA could vanish beneath us.  Fix
this by taking a read lock on mmap_sem.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/traps.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 57eb0f6f600..467b69ed102 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -418,12 +418,14 @@ static int bad_syscall(int n, struct pt_regs *regs)
 static inline void
 do_cache_op(unsigned long start, unsigned long end, int flags)
 {
+	struct mm_struct *mm = current->active_mm;
 	struct vm_area_struct *vma;
 
 	if (end < start || flags)
 		return;
 
-	vma = find_vma(current->active_mm, start);
+	down_read(&mm->mmap_sem);
+	vma = find_vma(mm, start);
 	if (vma && vma->vm_start < end) {
 		if (start < vma->vm_start)
 			start = vma->vm_start;
@@ -432,6 +434,7 @@ do_cache_op(unsigned long start, unsigned long end, int flags)
 
 		flush_cache_user_range(vma, start, end);
 	}
+	up_read(&mm->mmap_sem);
 }
 
 /*
-- 
cgit v1.2.3


From ee17962e249024ebba72acbfe7cf54f8ea5b72f8 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Mon, 28 Sep 2009 12:36:18 +0100
Subject: ARM: 5731/2: Fix U300 generic GPIO, remove ifdefs from MMCI v3

The #ifdefs in the MMCI driver were erroneous and just masking
a bug in the U300 generic GPIO implementation. This removes the
ifdefs and fixes the U300 generic GPIO instead.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-u300/gpio.c              | 10 ++++++++++
 arch/arm/mach-u300/include/mach/gpio.h |  1 +
 2 files changed, 11 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-u300/gpio.c b/arch/arm/mach-u300/gpio.c
index 63c8f27fb15..0b35826b7d1 100644
--- a/arch/arm/mach-u300/gpio.c
+++ b/arch/arm/mach-u300/gpio.c
@@ -281,6 +281,16 @@ int gpio_unregister_callback(unsigned gpio)
 }
 EXPORT_SYMBOL(gpio_unregister_callback);
 
+/* Non-zero means valid */
+int gpio_is_valid(int number)
+{
+	if (number >= 0 &&
+	    number < (U300_GPIO_NUM_PORTS * U300_GPIO_PINS_PER_PORT))
+		return 1;
+	return 0;
+}
+EXPORT_SYMBOL(gpio_is_valid);
+
 int gpio_request(unsigned gpio, const char *label)
 {
 	if (gpio_pin[gpio].users)
diff --git a/arch/arm/mach-u300/include/mach/gpio.h b/arch/arm/mach-u300/include/mach/gpio.h
index c8174128d7e..7b1fc984abb 100644
--- a/arch/arm/mach-u300/include/mach/gpio.h
+++ b/arch/arm/mach-u300/include/mach/gpio.h
@@ -258,6 +258,7 @@
 #define PIN_TO_PORT(val) (val >> 3)
 
 /* These can be found in arch/arm/mach-u300/gpio.c */
+extern int gpio_is_valid(int number);
 extern int gpio_request(unsigned gpio, const char *label);
 extern void gpio_free(unsigned gpio);
 extern int gpio_direction_input(unsigned gpio);
-- 
cgit v1.2.3


From 5950bd3897de70c8085f328287183c800424749a Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Mon, 28 Sep 2009 21:41:46 +0100
Subject: ARM: 5732/1: remove redundant include file

Remove duplicated #include('s) in arch/arm/mach-bcmring/core.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/core.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
index 492c649f451..d3bf29baa3a 100644
--- a/arch/arm/mach-bcmring/core.c
+++ b/arch/arm/mach-bcmring/core.c
@@ -31,7 +31,6 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 
-#include <linux/amba/bus.h>
 #include <mach/csp/mm_addr.h>
 #include <mach/hardware.h>
 #include <asm/clkdev.h>
-- 
cgit v1.2.3


From ca6cfa83463d1437895dc7e2e1b197e90dd07610 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Mon, 28 Sep 2009 21:56:19 +0100
Subject: ARM: 5733/1: fix bcmring compile error

The movement of the MMCI header file made bcmring break. It turns
out it was including asm/mmc.h without using it so fixing the
problem boils down to removing the offending include.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Leo Hao Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/core.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
index d3bf29baa3a..4b4f69251b3 100644
--- a/arch/arm/mach-bcmring/core.c
+++ b/arch/arm/mach-bcmring/core.c
@@ -44,7 +44,6 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
 
 #include <cfg_global.h>
 
-- 
cgit v1.2.3


From 6176d39471943a2e574782cbf62deded19b96aa0 Mon Sep 17 00:00:00 2001
From: Dmitry Artamonow <mad_soft@inbox.ru>
Date: Tue, 29 Sep 2009 06:12:37 +0100
Subject: ARM: 5734/1: arm: fix compilation of entry-common.S for older CPUs
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Commit 181f817eaaca4c1f introduced some new code to entry-common.S
Sadly, this new code uses 'bx' instruction which is available only on
ARMv5 and higher CPUs. This causes following compilation errors when
building kernel for StrongARM (ARMv4):

arch/arm/kernel/entry-common.S: Assembler messages:
arch/arm/kernel/entry-common.S:129: Error: selected processor does not
 support `bx ip'
arch/arm/kernel/entry-common.S:138: Error: selected processor does not
 support `bx ip'

Fix these errors by using 'mov pc' instead of 'bx'.

Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/entry-common.S | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 807cfebb0f4..825db52e558 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -126,7 +126,7 @@ ENTRY(__gnu_mcount_nc)
 	cmp r0, r2
 	bne gnu_trace
 	ldmia sp!, {r0-r3, ip, lr}
-	bx ip
+	mov pc, ip
 
 gnu_trace:
 	ldr r1, [sp, #20]			@ lr of instrumented routine
@@ -135,7 +135,7 @@ gnu_trace:
 	mov lr, pc
 	mov pc, r2
 	ldmia sp!, {r0-r3, ip, lr}
-	bx ip
+	mov pc, ip
 
 ENTRY(mcount)
 	stmdb sp!, {r0-r3, lr}
-- 
cgit v1.2.3


From 828c09509b9695271bcbdc53e9fc9a6a737148d2 Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Thu, 1 Oct 2009 15:43:56 -0700
Subject: const: constify remaining file_operations

[akpm@linux-foundation.org: fix KVM]
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/mach-ns9xxx/clock.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-ns9xxx/clock.c b/arch/arm/mach-ns9xxx/clock.c
index 44ed20d4a38..cf81cbc5754 100644
--- a/arch/arm/mach-ns9xxx/clock.c
+++ b/arch/arm/mach-ns9xxx/clock.c
@@ -195,7 +195,7 @@ static int clk_debugfs_open(struct inode *inode, struct file *file)
 	return single_open(file, clk_debugfs_show, NULL);
 }
 
-static struct file_operations clk_debugfs_operations = {
+static const struct file_operations clk_debugfs_operations = {
 	.open = clk_debugfs_open,
 	.read = seq_read,
 	.llseek = seq_lseek,
-- 
cgit v1.2.3


From 26f14947dbf31d60d1a67eee837a6d28c1e8830d Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 1 Oct 2009 15:44:18 -0700
Subject: s3cmci: Kconfig selection for PIO/DMA/Both

Add a selection for the data transfer mode of the s3cmci driver, allowing
for either a configuration or rumtime selection of the use of the DMA or
PIO transfer code.

The PIO only mode is 476 bytes smaller than the driver with both methods
compiled in.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/plat-s3c24xx/include/plat/mci.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c24xx/include/plat/mci.h b/arch/arm/plat-s3c24xx/include/plat/mci.h
index 2d0852ac3b2..f1bd6d4198d 100644
--- a/arch/arm/plat-s3c24xx/include/plat/mci.h
+++ b/arch/arm/plat-s3c24xx/include/plat/mci.h
@@ -4,6 +4,7 @@
 struct s3c24xx_mci_pdata {
 	unsigned int	wprotect_invert : 1;
 	unsigned int	detect_invert : 1;   /* set => detect active high. */
+	unsigned int	use_dma : 1;
 
 	unsigned int	gpio_detect;
 	unsigned int	gpio_wprotect;
-- 
cgit v1.2.3


From 00acfaeead211562cc5f88882c47bf1cb16c041a Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 1 Oct 2009 15:44:21 -0700
Subject: s3cmci: add better support for no card detect or write protect
 available

Add better support for omitting either the card detect or the write
protect GPIOs if the board does not support it.  Add the fields
no_wprotect and no_detect to the platform data which when set indicate the
absence of the respective GPIOs.

Note, this also fixes a minor bug where it tries to free IRQ0 if there is
no detect gpio available.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/plat-s3c24xx/include/plat/mci.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c24xx/include/plat/mci.h b/arch/arm/plat-s3c24xx/include/plat/mci.h
index f1bd6d4198d..c2cef613968 100644
--- a/arch/arm/plat-s3c24xx/include/plat/mci.h
+++ b/arch/arm/plat-s3c24xx/include/plat/mci.h
@@ -2,6 +2,8 @@
 #define _ARCH_MCI_H
 
 struct s3c24xx_mci_pdata {
+	unsigned int	no_wprotect : 1;
+	unsigned int	no_detect : 1;
 	unsigned int	wprotect_invert : 1;
 	unsigned int	detect_invert : 1;   /* set => detect active high. */
 	unsigned int	use_dma : 1;
-- 
cgit v1.2.3


From 5cf3bcdada29c2e0af945571761ff28264650398 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 24 Sep 2009 09:58:52 +0200
Subject: i.MX27 clock: rename spi clocks to match device

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/clock_imx27.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index 4089951acb4..174fa3e3094 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -638,9 +638,9 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
 	_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
 	_REGISTER_CLOCK("mxc-mmc.2", NULL, sdhc3_clk)
-	_REGISTER_CLOCK(NULL, "cspi1", cspi1_clk)
-	_REGISTER_CLOCK(NULL, "cspi2", cspi2_clk)
-	_REGISTER_CLOCK(NULL, "cspi3", cspi3_clk)
+	_REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
+	_REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
+	_REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
 	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
 	_REGISTER_CLOCK(NULL, "csi", csi_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk)
-- 
cgit v1.2.3


From b02019e6c8e37eec3cf214b50604af732936dd1c Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Wed, 30 Sep 2009 12:35:52 +0200
Subject: mx25 devices: Add missing include

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx25/devices.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c
index eb12de1da42..25c32967405 100644
--- a/arch/arm/mach-mx25/devices.c
+++ b/arch/arm/mach-mx25/devices.c
@@ -1,4 +1,5 @@
 #include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
 #include <linux/gpio.h>
 #include <mach/mx25.h>
 #include <mach/irqs.h>
-- 
cgit v1.2.3


From 165e10d80092ee05fe3927bb0b075d8c25101136 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 2 Oct 2009 09:10:38 +0200
Subject: mx25pdk: remove nand support as it is not present in current tree

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx25/mx25pdk.c | 7 -------
 1 file changed, 7 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mx25pdk.c
index 92aa4fd19d9..e99d7bbdead 100644
--- a/arch/arm/mach-mx25/mx25pdk.c
+++ b/arch/arm/mach-mx25/mx25pdk.c
@@ -23,19 +23,12 @@ static struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static struct mxc_nand_platform_data nand_board_info = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
 static void __init mx25pdk_init(void)
 {
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 	mxc_register_device(&mxc_usbh2, NULL);
-	mxc_register_device(&mxc_nand_device, &nand_board_info);
 }
 
-
 static void __init mx25pdk_timer_init(void)
 {
 	mx25_clocks_init(26000000);
-- 
cgit v1.2.3


From de41fddd9ef1fda7e00ad4d6af59013ed9f52953 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 2 Oct 2009 09:14:18 +0200
Subject: mx25: Add missing copyright / license header

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx25/devices.c | 18 ++++++++++++++++++
 arch/arm/mach-mx25/mx25pdk.c | 18 ++++++++++++++++++
 2 files changed, 36 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c
index 25c32967405..63511de3a55 100644
--- a/arch/arm/mach-mx25/devices.c
+++ b/arch/arm/mach-mx25/devices.c
@@ -1,3 +1,21 @@
+/*
+ * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA  02110-1301, USA.
+ */
+
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/gpio.h>
diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mx25pdk.c
index e99d7bbdead..d23ae571c03 100644
--- a/arch/arm/mach-mx25/mx25pdk.c
+++ b/arch/arm/mach-mx25/mx25pdk.c
@@ -1,3 +1,21 @@
+/*
+ * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA  02110-1301, USA.
+ */
+
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/clk.h>
-- 
cgit v1.2.3


From 0a4bc5e89cfc3cc3083acef130cd8b670ee56914 Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Tue, 29 Sep 2009 23:49:02 +0100
Subject: ARM: 5735/1: sa1111: CodingStyle cleanups

EXPORT_* macros should follow immediately after the closing function
brace line.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/common/sa1111.c | 25 ++++++++++++-------------
 1 file changed, 12 insertions(+), 13 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index ef12794c3c6..8ba7044c554 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -1032,6 +1032,7 @@ unsigned int sa1111_pll_clock(struct sa1111_dev *sadev)
 
 	return __sa1111_pll_clock(sachip);
 }
+EXPORT_SYMBOL(sa1111_pll_clock);
 
 /**
  *	sa1111_select_audio_mode - select I2S or AC link mode
@@ -1059,6 +1060,7 @@ void sa1111_select_audio_mode(struct sa1111_dev *sadev, int mode)
 
 	spin_unlock_irqrestore(&sachip->lock, flags);
 }
+EXPORT_SYMBOL(sa1111_select_audio_mode);
 
 /**
  *	sa1111_set_audio_rate - set the audio sample rate
@@ -1083,6 +1085,7 @@ int sa1111_set_audio_rate(struct sa1111_dev *sadev, int rate)
 
 	return 0;
 }
+EXPORT_SYMBOL(sa1111_set_audio_rate);
 
 /**
  *	sa1111_get_audio_rate - get the audio sample rate
@@ -1100,6 +1103,7 @@ int sa1111_get_audio_rate(struct sa1111_dev *sadev)
 
 	return __sa1111_pll_clock(sachip) / (256 * div);
 }
+EXPORT_SYMBOL(sa1111_get_audio_rate);
 
 void sa1111_set_io_dir(struct sa1111_dev *sadev,
 		       unsigned int bits, unsigned int dir,
@@ -1128,6 +1132,7 @@ void sa1111_set_io_dir(struct sa1111_dev *sadev,
 	MODIFY_BITS(gpio + SA1111_GPIO_PCSDR, (bits >> 16) & 255, sleep_dir >> 16);
 	spin_unlock_irqrestore(&sachip->lock, flags);
 }
+EXPORT_SYMBOL(sa1111_set_io_dir);
 
 void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v)
 {
@@ -1142,6 +1147,7 @@ void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v)
 	MODIFY_BITS(gpio + SA1111_GPIO_PCDWR, (bits >> 16) & 255, v >> 16);
 	spin_unlock_irqrestore(&sachip->lock, flags);
 }
+EXPORT_SYMBOL(sa1111_set_io);
 
 void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v)
 {
@@ -1156,6 +1162,7 @@ void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned i
 	MODIFY_BITS(gpio + SA1111_GPIO_PCSSR, (bits >> 16) & 255, v >> 16);
 	spin_unlock_irqrestore(&sachip->lock, flags);
 }
+EXPORT_SYMBOL(sa1111_set_sleep_io);
 
 /*
  * Individual device operations.
@@ -1176,6 +1183,7 @@ void sa1111_enable_device(struct sa1111_dev *sadev)
 	sa1111_writel(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
 	spin_unlock_irqrestore(&sachip->lock, flags);
 }
+EXPORT_SYMBOL(sa1111_enable_device);
 
 /**
  *	sa1111_disable_device - disable an on-chip SA1111 function block
@@ -1192,6 +1200,7 @@ void sa1111_disable_device(struct sa1111_dev *sadev)
 	sa1111_writel(val & ~sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
 	spin_unlock_irqrestore(&sachip->lock, flags);
 }
+EXPORT_SYMBOL(sa1111_disable_device);
 
 /*
  *	SA1111 "Register Access Bus."
@@ -1259,17 +1268,20 @@ struct bus_type sa1111_bus_type = {
 	.suspend	= sa1111_bus_suspend,
 	.resume		= sa1111_bus_resume,
 };
+EXPORT_SYMBOL(sa1111_bus_type);
 
 int sa1111_driver_register(struct sa1111_driver *driver)
 {
 	driver->drv.bus = &sa1111_bus_type;
 	return driver_register(&driver->drv);
 }
+EXPORT_SYMBOL(sa1111_driver_register);
 
 void sa1111_driver_unregister(struct sa1111_driver *driver)
 {
 	driver_unregister(&driver->drv);
 }
+EXPORT_SYMBOL(sa1111_driver_unregister);
 
 static int __init sa1111_init(void)
 {
@@ -1290,16 +1302,3 @@ module_exit(sa1111_exit);
 
 MODULE_DESCRIPTION("Intel Corporation SA1111 core driver");
 MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(sa1111_select_audio_mode);
-EXPORT_SYMBOL(sa1111_set_audio_rate);
-EXPORT_SYMBOL(sa1111_get_audio_rate);
-EXPORT_SYMBOL(sa1111_set_io_dir);
-EXPORT_SYMBOL(sa1111_set_io);
-EXPORT_SYMBOL(sa1111_set_sleep_io);
-EXPORT_SYMBOL(sa1111_enable_device);
-EXPORT_SYMBOL(sa1111_disable_device);
-EXPORT_SYMBOL(sa1111_pll_clock);
-EXPORT_SYMBOL(sa1111_bus_type);
-EXPORT_SYMBOL(sa1111_driver_register);
-EXPORT_SYMBOL(sa1111_driver_unregister);
-- 
cgit v1.2.3


From 31abdb744179159f8b605f56da5b197b188e1689 Mon Sep 17 00:00:00 2001
From: David Brown <davidb@codeaurora.org>
Date: Thu, 1 Oct 2009 17:43:29 +0100
Subject: ARM: 5739/1: ARM: allow empty ATAG_CORE

From: David Brown <davidb@quicinc.com>

The ATAG_CORE is allowed to be empty.  Although this is handled
by parse_tag_core(), __vet_atags during startup rejects this tag
unless it contains data.  Allow the initial tag to be either the
full size, or empty.

Signed-off-by: David Brown <davidb@quicinc.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/head-common.S | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index 93ad576b2d7..885a7214418 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -13,6 +13,7 @@
 
 #define ATAG_CORE 0x54410001
 #define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2)
+#define ATAG_CORE_SIZE_EMPTY ((2*4) >> 2)
 
 	.align	2
 	.type	__switch_data, %object
@@ -251,7 +252,8 @@ __vet_atags:
 	bne	1f
 
 	ldr	r5, [r2, #0]			@ is first tag ATAG_CORE?
-	subs	r5, r5, #ATAG_CORE_SIZE
+	cmp	r5, #ATAG_CORE_SIZE
+	cmpne	r5, #ATAG_CORE_SIZE_EMPTY
 	bne	1f
 	ldr	r5, [r2, #4]
 	ldr	r6, =ATAG_CORE
-- 
cgit v1.2.3


From 6806bfe18fca92e2001538b84cab5f63c5ea4bed Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@snapgear.com>
Date: Fri, 2 Oct 2009 00:45:28 +0100
Subject: ARM: 5740/1: fix valid_phys_addr_range() range check

Commit 1522ac3ec95ff0230e7aa516f86b674fdf72866c
("Fix virtual to physical translation macro corner cases")
breaks the end of memory check in valid_phys_addr_range().
The modified expression results in the apparent /dev/mem size
being 2 bytes smaller than what it actually is.

This patch reworks the expression to correctly check the address,
while maintaining use of a valid address to __pa().

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/mmap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
index f7457fea6de..2b7996401b0 100644
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@@ -124,7 +124,7 @@ int valid_phys_addr_range(unsigned long addr, size_t size)
 {
 	if (addr < PHYS_OFFSET)
 		return 0;
-	if (addr + size >= __pa(high_memory - 1))
+	if (addr + size > __pa(high_memory - 1) + 1)
 		return 0;
 
 	return 1;
-- 
cgit v1.2.3


From 4fb2847437d871fe579f820ceb18031db3359901 Mon Sep 17 00:00:00 2001
From: "Kirill A. Shutemov" <kirill@shutemov.name>
Date: Fri, 25 Sep 2009 13:39:47 +0100
Subject: ARM: 5727/1: Pass IFSR register to do_PrefetchAbort()

Instruction fault status register, IFSR, was introduced on ARMv6 to
provide status information about the last insturction fault. It
needed for proper prefetch abort handling.

Now we have three prefetch abort model:

  * legacy - for CPUs before ARMv6. They doesn't provide neither
    IFSR nor IFAR. We simulate IFSR with section translation fault
    status for them to generalize code;
  * ARMv6 - provides IFSR, but not IFAR;
  * ARMv7 - provides both IFSR and IFAR.

Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/glue.h    | 26 ++++++++++++++-----
 arch/arm/kernel/entry-armv.S   | 18 +++++--------
 arch/arm/kernel/entry-common.S |  7 ------
 arch/arm/mm/Kconfig            | 57 ++++++++++++++++++++++--------------------
 arch/arm/mm/Makefile           |  4 +++
 arch/arm/mm/fault.c            |  2 +-
 arch/arm/mm/pabort-legacy.S    | 19 ++++++++++++++
 arch/arm/mm/pabort-v6.S        | 19 ++++++++++++++
 arch/arm/mm/pabort-v7.S        | 20 +++++++++++++++
 arch/arm/mm/proc-arm1020.S     |  2 +-
 arch/arm/mm/proc-arm1020e.S    |  2 +-
 arch/arm/mm/proc-arm1022.S     |  2 +-
 arch/arm/mm/proc-arm1026.S     |  2 +-
 arch/arm/mm/proc-arm6_7.S      |  4 +--
 arch/arm/mm/proc-arm720.S      |  2 +-
 arch/arm/mm/proc-arm740.S      |  2 +-
 arch/arm/mm/proc-arm7tdmi.S    |  2 +-
 arch/arm/mm/proc-arm920.S      |  2 +-
 arch/arm/mm/proc-arm922.S      |  2 +-
 arch/arm/mm/proc-arm925.S      |  2 +-
 arch/arm/mm/proc-arm926.S      |  2 +-
 arch/arm/mm/proc-arm940.S      |  2 +-
 arch/arm/mm/proc-arm946.S      |  2 +-
 arch/arm/mm/proc-arm9tdmi.S    |  2 +-
 arch/arm/mm/proc-fa526.S       |  2 +-
 arch/arm/mm/proc-feroceon.S    |  2 +-
 arch/arm/mm/proc-mohawk.S      |  2 +-
 arch/arm/mm/proc-sa110.S       |  2 +-
 arch/arm/mm/proc-sa1100.S      |  2 +-
 arch/arm/mm/proc-v6.S          |  2 +-
 arch/arm/mm/proc-v7.S          |  2 +-
 arch/arm/mm/proc-xsc3.S        |  2 +-
 arch/arm/mm/proc-xscale.S      |  2 +-
 33 files changed, 144 insertions(+), 78 deletions(-)
 create mode 100644 arch/arm/mm/pabort-legacy.S
 create mode 100644 arch/arm/mm/pabort-v6.S
 create mode 100644 arch/arm/mm/pabort-v7.S

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/glue.h b/arch/arm/include/asm/glue.h
index a0e39d5d00c..234a3fc1c78 100644
--- a/arch/arm/include/asm/glue.h
+++ b/arch/arm/include/asm/glue.h
@@ -120,25 +120,39 @@
 #endif
 
 /*
- * Prefetch abort handler.  If the CPU has an IFAR use that, otherwise
- * use the address of the aborted instruction
+ *	Prefetch Abort Model
+ *	================
+ *
+ *	We have the following to choose from:
+ *	  legacy	- no IFSR, no IFAR
+ *	  v6		- ARMv6: IFSR, no IFAR
+ *	  v7		- ARMv7: IFSR and IFAR
  */
+
 #undef CPU_PABORT_HANDLER
 #undef MULTI_PABORT
 
-#ifdef CONFIG_CPU_PABRT_IFAR
+#ifdef CONFIG_CPU_PABRT_LEGACY
+# ifdef CPU_PABORT_HANDLER
+#  define MULTI_PABORT 1
+# else
+#  define CPU_PABORT_HANDLER legacy_pabort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_PABRT_V6
 # ifdef CPU_PABORT_HANDLER
 #  define MULTI_PABORT 1
 # else
-#  define CPU_PABORT_HANDLER(reg, insn)	mrc p15, 0, reg, cr6, cr0, 2
+#  define CPU_PABORT_HANDLER v6_pabort
 # endif
 #endif
 
-#ifdef CONFIG_CPU_PABRT_NOIFAR
+#ifdef CONFIG_CPU_PABRT_V7
 # ifdef CPU_PABORT_HANDLER
 #  define MULTI_PABORT 1
 # else
-#  define CPU_PABORT_HANDLER(reg, insn)	mov reg, insn
+#  define CPU_PABORT_HANDLER v7_pabort
 # endif
 #endif
 
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 0a2ba51cf35..322410be573 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -311,22 +311,16 @@ __pabt_svc:
 	tst	r3, #PSR_I_BIT
 	biceq	r9, r9, #PSR_I_BIT
 
-	@
-	@ set args, then call main handler
-	@
-	@  r0 - address of faulting instruction
-	@  r1 - pointer to registers on stack
-	@
-#ifdef MULTI_PABORT
 	mov	r0, r2			@ pass address of aborted instruction.
+#ifdef MULTI_PABORT
 	ldr	r4, .LCprocfns
 	mov	lr, pc
 	ldr	pc, [r4, #PROCESSOR_PABT_FUNC]
 #else
-	CPU_PABORT_HANDLER(r0, r2)
+	bl	CPU_PABORT_HANDLER
 #endif
 	msr	cpsr_c, r9			@ Maybe enable interrupts
-	mov	r1, sp				@ regs
+	mov	r2, sp				@ regs
 	bl	do_PrefetchAbort		@ call abort handler
 
 	@
@@ -701,16 +695,16 @@ ENDPROC(__und_usr_unknown)
 __pabt_usr:
 	usr_entry
 
-#ifdef MULTI_PABORT
 	mov	r0, r2			@ pass address of aborted instruction.
+#ifdef MULTI_PABORT
 	ldr	r4, .LCprocfns
 	mov	lr, pc
 	ldr	pc, [r4, #PROCESSOR_PABT_FUNC]
 #else
-	CPU_PABORT_HANDLER(r0, r2)
+	bl	CPU_PABORT_HANDLER
 #endif
 	enable_irq				@ Enable interrupts
-	mov	r1, sp				@ regs
+	mov	r2, sp				@ regs
 	bl	do_PrefetchAbort		@ call abort handler
  UNWIND(.fnend		)
 	/* fall through */
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 825db52e558..f0fe95b7085 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -425,13 +425,6 @@ sys_mmap2:
 #endif
 ENDPROC(sys_mmap2)
 
-ENTRY(pabort_ifar)
-		mrc	p15, 0, r0, cr6, cr0, 2
-ENTRY(pabort_noifar)
-		mov	pc, lr
-ENDPROC(pabort_ifar)
-ENDPROC(pabort_noifar)
-
 #ifdef CONFIG_OABI_COMPAT
 
 /*
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 8d43e58f924..e993140edd8 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -17,7 +17,7 @@ config CPU_ARM610
 	select CPU_CP15_MMU
 	select CPU_COPY_V3 if MMU
 	select CPU_TLB_V3 if MMU
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	help
 	  The ARM610 is the successor to the ARM3 processor
 	  and was produced by VLSI Technology Inc.
@@ -31,7 +31,7 @@ config CPU_ARM7TDMI
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_LV4T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4
 	help
 	  A 32-bit RISC microprocessor based on the ARM7 processor core
@@ -49,7 +49,7 @@ config CPU_ARM710
 	select CPU_CP15_MMU
 	select CPU_COPY_V3 if MMU
 	select CPU_TLB_V3 if MMU
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	help
 	  A 32-bit RISC microprocessor based on the ARM7 processor core
 	  designed by Advanced RISC Machines Ltd. The ARM710 is the
@@ -64,7 +64,7 @@ config CPU_ARM720T
 	bool "Support ARM720T processor" if ARCH_INTEGRATOR
 	select CPU_32v4T
 	select CPU_ABRT_LV4T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
@@ -83,7 +83,7 @@ config CPU_ARM740T
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_LV4T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V3	# although the core is v4t
 	select CPU_CP15_MPU
 	help
@@ -100,7 +100,7 @@ config CPU_ARM9TDMI
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_NOMMU
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4
 	help
 	  A 32-bit RISC microprocessor based on the ARM9 processor core
@@ -114,7 +114,7 @@ config CPU_ARM920T
 	bool "Support ARM920T processor" if ARCH_INTEGRATOR
 	select CPU_32v4T
 	select CPU_ABRT_EV4T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
@@ -135,7 +135,7 @@ config CPU_ARM922T
 	bool "Support ARM922T processor" if ARCH_INTEGRATOR
 	select CPU_32v4T
 	select CPU_ABRT_EV4T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
@@ -154,7 +154,7 @@ config CPU_ARM925T
  	bool "Support ARM925T processor" if ARCH_OMAP1
 	select CPU_32v4T
 	select CPU_ABRT_EV4T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
@@ -173,7 +173,7 @@ config CPU_ARM926T
 	bool "Support ARM926T processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB
 	select CPU_32v5
 	select CPU_ABRT_EV5TJ
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU
@@ -191,7 +191,7 @@ config CPU_FA526
 	bool
 	select CPU_32v4
 	select CPU_ABRT_EV4
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
 	select CPU_CACHE_FA
@@ -210,7 +210,7 @@ config CPU_ARM940T
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_NOMMU
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MPU
 	help
@@ -228,7 +228,7 @@ config CPU_ARM946E
 	depends on !MMU
 	select CPU_32v5
 	select CPU_ABRT_NOMMU
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MPU
 	help
@@ -244,7 +244,7 @@ config CPU_ARM1020
 	bool "Support ARM1020T (rev 0) processor" if ARCH_INTEGRATOR
 	select CPU_32v5
 	select CPU_ABRT_EV4T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
@@ -262,7 +262,7 @@ config CPU_ARM1020E
 	bool "Support ARM1020E processor" if ARCH_INTEGRATOR
 	select CPU_32v5
 	select CPU_ABRT_EV4T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
@@ -275,7 +275,7 @@ config CPU_ARM1022
 	bool "Support ARM1022E processor" if ARCH_INTEGRATOR
 	select CPU_32v5
 	select CPU_ABRT_EV4T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU # can probably do better
@@ -293,7 +293,7 @@ config CPU_ARM1026
 	bool "Support ARM1026EJ-S processor" if ARCH_INTEGRATOR
 	select CPU_32v5
 	select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU # can probably do better
@@ -311,7 +311,7 @@ config CPU_SA110
 	select CPU_32v3 if ARCH_RPC
 	select CPU_32v4 if !ARCH_RPC
 	select CPU_ABRT_EV4
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WB
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
@@ -331,7 +331,7 @@ config CPU_SA1100
 	bool
 	select CPU_32v4
 	select CPU_ABRT_EV4
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WB
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
@@ -342,7 +342,7 @@ config CPU_XSCALE
 	bool
 	select CPU_32v5
 	select CPU_ABRT_EV5T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
 	select CPU_TLB_V4WBI if MMU
@@ -352,7 +352,7 @@ config CPU_XSC3
 	bool
 	select CPU_32v5
 	select CPU_ABRT_EV5T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
 	select CPU_TLB_V4WBI if MMU
@@ -363,7 +363,7 @@ config CPU_MOHAWK
 	bool
 	select CPU_32v5
 	select CPU_ABRT_EV5T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
 	select CPU_TLB_V4WBI if MMU
@@ -374,7 +374,7 @@ config CPU_FEROCEON
 	bool
 	select CPU_32v5
 	select CPU_ABRT_EV5T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
 	select CPU_COPY_FEROCEON if MMU
@@ -394,7 +394,7 @@ config CPU_V6
 	bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
 	select CPU_32v6
 	select CPU_ABRT_EV6
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_V6
 	select CPU_CACHE_V6
 	select CPU_CACHE_VIPT
 	select CPU_CP15_MMU
@@ -420,7 +420,7 @@ config CPU_V7
 	select CPU_32v6K
 	select CPU_32v7
 	select CPU_ABRT_EV7
-	select CPU_PABRT_IFAR
+	select CPU_PABRT_V7
 	select CPU_CACHE_V7
 	select CPU_CACHE_VIPT
 	select CPU_CP15_MMU
@@ -482,10 +482,13 @@ config CPU_ABRT_EV6
 config CPU_ABRT_EV7
 	bool
 
-config CPU_PABRT_IFAR
+config CPU_PABRT_LEGACY
 	bool
 
-config CPU_PABRT_NOIFAR
+config CPU_PABRT_V6
+	bool
+
+config CPU_PABRT_V7
 	bool
 
 # The cache model
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 63e3f6dd0e2..055cb2aa813 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -27,6 +27,10 @@ obj-$(CONFIG_CPU_ABRT_EV5TJ)	+= abort-ev5tj.o
 obj-$(CONFIG_CPU_ABRT_EV6)	+= abort-ev6.o
 obj-$(CONFIG_CPU_ABRT_EV7)	+= abort-ev7.o
 
+obj-$(CONFIG_CPU_PABRT_LEGACY)	+= pabort-legacy.o
+obj-$(CONFIG_CPU_PABRT_V6)	+= pabort-v6.o
+obj-$(CONFIG_CPU_PABRT_V7)	+= pabort-v7.o
+
 obj-$(CONFIG_CPU_CACHE_V3)	+= cache-v3.o
 obj-$(CONFIG_CPU_CACHE_V4)	+= cache-v4.o
 obj-$(CONFIG_CPU_CACHE_V4WT)	+= cache-v4wt.o
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 379f7855605..fd2375f8499 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -520,7 +520,7 @@ do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 }
 
 asmlinkage void __exception
-do_PrefetchAbort(unsigned long addr, struct pt_regs *regs)
+do_PrefetchAbort(unsigned long addr, unsigned int ifsr, struct pt_regs *regs)
 {
 	do_translation_fault(addr, FSR_LNX_PF, regs);
 }
diff --git a/arch/arm/mm/pabort-legacy.S b/arch/arm/mm/pabort-legacy.S
new file mode 100644
index 00000000000..87970eba88e
--- /dev/null
+++ b/arch/arm/mm/pabort-legacy.S
@@ -0,0 +1,19 @@
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Function: legacy_pabort
+ *
+ * Params  : r0 = address of aborted instruction
+ *
+ * Returns : r0 = address of abort
+ *	   : r1 = Simulated IFSR with section translation fault status
+ *
+ * Purpose : obtain information about current prefetch abort.
+ */
+
+	.align	5
+ENTRY(legacy_pabort)
+	mov	r1, #5
+	mov	pc, lr
+ENDPROC(legacy_pabort)
diff --git a/arch/arm/mm/pabort-v6.S b/arch/arm/mm/pabort-v6.S
new file mode 100644
index 00000000000..06e3d1ef211
--- /dev/null
+++ b/arch/arm/mm/pabort-v6.S
@@ -0,0 +1,19 @@
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Function: v6_pabort
+ *
+ * Params  : r0 = address of aborted instruction
+ *
+ * Returns : r0 = address of abort
+ *	   : r1 = IFSR
+ *
+ * Purpose : obtain information about current prefetch abort.
+ */
+
+	.align	5
+ENTRY(v6_pabort)
+	mrc	p15, 0, r1, c5, c0, 1		@ get IFSR
+	mov	pc, lr
+ENDPROC(v6_pabort)
diff --git a/arch/arm/mm/pabort-v7.S b/arch/arm/mm/pabort-v7.S
new file mode 100644
index 00000000000..a8b3b300a18
--- /dev/null
+++ b/arch/arm/mm/pabort-v7.S
@@ -0,0 +1,20 @@
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Function: v6_pabort
+ *
+ * Params  : r0 = address of aborted instruction
+ *
+ * Returns : r0 = address of abort
+ *	   : r1 = IFSR
+ *
+ * Purpose : obtain information about current prefetch abort.
+ */
+
+	.align	5
+ENTRY(v7_pabort)
+	mrc	p15, 0, r0, c6, c0, 2		@ get IFAR
+	mrc	p15, 0, r1, c5, c0, 1		@ get IFSR
+	mov	pc, lr
+ENDPROC(v7_pabort)
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index b5551bf010a..d9fb4b98c49 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -449,7 +449,7 @@ arm1020_crval:
 	.type	arm1020_processor_functions, #object
 arm1020_processor_functions:
 	.word	v4t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm1020_proc_init
 	.word	cpu_arm1020_proc_fin
 	.word	cpu_arm1020_reset
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index 8bc6740c29e..7453b75dcea 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -430,7 +430,7 @@ arm1020e_crval:
 	.type	arm1020e_processor_functions, #object
 arm1020e_processor_functions:
 	.word	v4t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm1020e_proc_init
 	.word	cpu_arm1020e_proc_fin
 	.word	cpu_arm1020e_reset
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
index 2cd03e66c0a..8eb72d75a8b 100644
--- a/arch/arm/mm/proc-arm1022.S
+++ b/arch/arm/mm/proc-arm1022.S
@@ -413,7 +413,7 @@ arm1022_crval:
 	.type	arm1022_processor_functions, #object
 arm1022_processor_functions:
 	.word	v4t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm1022_proc_init
 	.word	cpu_arm1022_proc_fin
 	.word	cpu_arm1022_reset
diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S
index ad961a897f6..3b59f0d6713 100644
--- a/arch/arm/mm/proc-arm1026.S
+++ b/arch/arm/mm/proc-arm1026.S
@@ -408,7 +408,7 @@ arm1026_crval:
 	.type	arm1026_processor_functions, #object
 arm1026_processor_functions:
 	.word	v5t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm1026_proc_init
 	.word	cpu_arm1026_proc_fin
 	.word	cpu_arm1026_reset
diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S
index 80d6e1de069..3f9cd3d8f6d 100644
--- a/arch/arm/mm/proc-arm6_7.S
+++ b/arch/arm/mm/proc-arm6_7.S
@@ -278,7 +278,7 @@ __arm7_setup:	mov	r0, #0
 		.type	arm6_processor_functions, #object
 ENTRY(arm6_processor_functions)
 		.word	cpu_arm6_data_abort
-		.word	pabort_noifar
+		.word	legacy_pabort
 		.word	cpu_arm6_proc_init
 		.word	cpu_arm6_proc_fin
 		.word	cpu_arm6_reset
@@ -295,7 +295,7 @@ ENTRY(arm6_processor_functions)
 		.type	arm7_processor_functions, #object
 ENTRY(arm7_processor_functions)
 		.word	cpu_arm7_data_abort
-		.word	pabort_noifar
+		.word	legacy_pabort
 		.word	cpu_arm7_proc_init
 		.word	cpu_arm7_proc_fin
 		.word	cpu_arm7_reset
diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S
index 85ae18695f1..0b62de24466 100644
--- a/arch/arm/mm/proc-arm720.S
+++ b/arch/arm/mm/proc-arm720.S
@@ -181,7 +181,7 @@ arm720_crval:
 		.type	arm720_processor_functions, #object
 ENTRY(arm720_processor_functions)
 		.word	v4t_late_abort
-		.word	pabort_noifar
+		.word	legacy_pabort
 		.word	cpu_arm720_proc_init
 		.word	cpu_arm720_proc_fin
 		.word	cpu_arm720_reset
diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S
index 4f95bee63e9..01860cdeb2e 100644
--- a/arch/arm/mm/proc-arm740.S
+++ b/arch/arm/mm/proc-arm740.S
@@ -126,7 +126,7 @@ __arm740_setup:
 	.type	arm740_processor_functions, #object
 ENTRY(arm740_processor_functions)
 	.word	v4t_late_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm740_proc_init
 	.word	cpu_arm740_proc_fin
 	.word	cpu_arm740_reset
diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S
index 93e05fa7bed..1201b986382 100644
--- a/arch/arm/mm/proc-arm7tdmi.S
+++ b/arch/arm/mm/proc-arm7tdmi.S
@@ -64,7 +64,7 @@ __arm7tdmi_setup:
 		.type	arm7tdmi_processor_functions, #object
 ENTRY(arm7tdmi_processor_functions)
 		.word	v4t_late_abort
-		.word	pabort_noifar
+		.word	legacy_pabort
 		.word	cpu_arm7tdmi_proc_init
 		.word	cpu_arm7tdmi_proc_fin
 		.word	cpu_arm7tdmi_reset
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index 914d688394f..2b7c197cc58 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -395,7 +395,7 @@ arm920_crval:
 	.type	arm920_processor_functions, #object
 arm920_processor_functions:
 	.word	v4t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm920_proc_init
 	.word	cpu_arm920_proc_fin
 	.word	cpu_arm920_reset
diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
index 51c9c9859e5..06a1aa4e339 100644
--- a/arch/arm/mm/proc-arm922.S
+++ b/arch/arm/mm/proc-arm922.S
@@ -399,7 +399,7 @@ arm922_crval:
 	.type	arm922_processor_functions, #object
 arm922_processor_functions:
 	.word	v4t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm922_proc_init
 	.word	cpu_arm922_proc_fin
 	.word	cpu_arm922_reset
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index 2724526d89c..cb53435a85a 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -462,7 +462,7 @@ arm925_crval:
 	.type	arm925_processor_functions, #object
 arm925_processor_functions:
 	.word	v4t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm925_proc_init
 	.word	cpu_arm925_proc_fin
 	.word	cpu_arm925_reset
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 54466937bff..1c4848704bb 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -415,7 +415,7 @@ arm926_crval:
 	.type	arm926_processor_functions, #object
 arm926_processor_functions:
 	.word	v5tj_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm926_proc_init
 	.word	cpu_arm926_proc_fin
 	.word	cpu_arm926_reset
diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S
index f595117caf5..5b0f8464c8f 100644
--- a/arch/arm/mm/proc-arm940.S
+++ b/arch/arm/mm/proc-arm940.S
@@ -322,7 +322,7 @@ __arm940_setup:
 	.type	arm940_processor_functions, #object
 ENTRY(arm940_processor_functions)
 	.word	nommu_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm940_proc_init
 	.word	cpu_arm940_proc_fin
 	.word	cpu_arm940_reset
diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S
index e03f6ff1fb2..40c0449a139 100644
--- a/arch/arm/mm/proc-arm946.S
+++ b/arch/arm/mm/proc-arm946.S
@@ -377,7 +377,7 @@ __arm946_setup:
 	.type	arm946_processor_functions, #object
 ENTRY(arm946_processor_functions)
 	.word	nommu_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm946_proc_init
 	.word	cpu_arm946_proc_fin
 	.word	cpu_arm946_reset
diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S
index be6c11d2b3f..28545c29dbc 100644
--- a/arch/arm/mm/proc-arm9tdmi.S
+++ b/arch/arm/mm/proc-arm9tdmi.S
@@ -64,7 +64,7 @@ __arm9tdmi_setup:
 		.type	arm9tdmi_processor_functions, #object
 ENTRY(arm9tdmi_processor_functions)
 		.word	nommu_early_abort
-		.word	pabort_noifar
+		.word	legacy_pabort
 		.word	cpu_arm9tdmi_proc_init
 		.word	cpu_arm9tdmi_proc_fin
 		.word	cpu_arm9tdmi_reset
diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S
index 08b8a955d5d..08f5ac237ad 100644
--- a/arch/arm/mm/proc-fa526.S
+++ b/arch/arm/mm/proc-fa526.S
@@ -191,7 +191,7 @@ fa526_cr1_set:
 	.type	fa526_processor_functions, #object
 fa526_processor_functions:
 	.word	v4_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_fa526_proc_init
 	.word	cpu_fa526_proc_fin
 	.word	cpu_fa526_reset
diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S
index 0fe1f8fc348..d0d7795200f 100644
--- a/arch/arm/mm/proc-feroceon.S
+++ b/arch/arm/mm/proc-feroceon.S
@@ -499,7 +499,7 @@ feroceon_crval:
 	.type	feroceon_processor_functions, #object
 feroceon_processor_functions:
 	.word	v5t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_feroceon_proc_init
 	.word	cpu_feroceon_proc_fin
 	.word	cpu_feroceon_reset
diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S
index 540f5078496..52b5fd74fbb 100644
--- a/arch/arm/mm/proc-mohawk.S
+++ b/arch/arm/mm/proc-mohawk.S
@@ -359,7 +359,7 @@ mohawk_crval:
 	.type	mohawk_processor_functions, #object
 mohawk_processor_functions:
 	.word	v5t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_mohawk_proc_init
 	.word	cpu_mohawk_proc_fin
 	.word	cpu_mohawk_reset
diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S
index 90a7e5279f2..7b706b38990 100644
--- a/arch/arm/mm/proc-sa110.S
+++ b/arch/arm/mm/proc-sa110.S
@@ -199,7 +199,7 @@ sa110_crval:
 	.type	sa110_processor_functions, #object
 ENTRY(sa110_processor_functions)
 	.word	v4_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_sa110_proc_init
 	.word	cpu_sa110_proc_fin
 	.word	cpu_sa110_reset
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index 451e2d953e2..ee7700242c1 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -214,7 +214,7 @@ sa1100_crval:
 	.type	sa1100_processor_functions, #object
 ENTRY(sa1100_processor_functions)
 	.word	v4_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_sa1100_proc_init
 	.word	cpu_sa1100_proc_fin
 	.word	cpu_sa1100_reset
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 524ddae9259..194737d60a2 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -191,7 +191,7 @@ v6_crval:
 	.type	v6_processor_functions, #object
 ENTRY(v6_processor_functions)
 	.word	v6_early_abort
-	.word	pabort_noifar
+	.word	v6_pabort
 	.word	cpu_v6_proc_init
 	.word	cpu_v6_proc_fin
 	.word	cpu_v6_reset
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index f3fa1c32fe9..23ebcf6eab9 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -295,7 +295,7 @@ __v7_setup_stack:
 	.type	v7_processor_functions, #object
 ENTRY(v7_processor_functions)
 	.word	v7_early_abort
-	.word	pabort_ifar
+	.word	v7_pabort
 	.word	cpu_v7_proc_init
 	.word	cpu_v7_proc_fin
 	.word	cpu_v7_reset
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 33515c214b9..2028f370288 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -428,7 +428,7 @@ xsc3_crval:
 	.type	xsc3_processor_functions, #object
 ENTRY(xsc3_processor_functions)
 	.word	v5t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_xsc3_proc_init
 	.word	cpu_xsc3_proc_fin
 	.word	cpu_xsc3_reset
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 423394260bc..f056c283682 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -511,7 +511,7 @@ xscale_crval:
 	.type	xscale_processor_functions, #object
 ENTRY(xscale_processor_functions)
 	.word	v5t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_xscale_proc_init
 	.word	cpu_xscale_proc_fin
 	.word	cpu_xscale_reset
-- 
cgit v1.2.3


From d25ef8b86e6a58f5476bf6e4a8da730b335f68fa Mon Sep 17 00:00:00 2001
From: "Kirill A. Shutemov" <kirill@shutemov.name>
Date: Fri, 25 Sep 2009 13:40:49 +0100
Subject: ARM: 5728/1: Proper prefetch abort handling on ARMv6 and ARMv7

Currently, on ARMv6 and ARMv7, if an application tries to execute
code (or garbage) on non-executable page it hangs. It caused by
incorrect prefetch abort handling. Now every prefetch abort
processes as a translation fault.

To fix this we have to analyze instruction fault status register
to figure out reason why we've got the abort and process it
accordingly.

To make IFSR different from DFSR we set bit 31 which is reserved in
both IFSR and DFSR.

This patch also tries to protect from future hangs on unexpected
exceptions. An application will be killed if unexpected exception
type was received.

Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/fault.c | 51 ++++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 50 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index fd2375f8499..ae0e25f5a70 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -519,9 +519,58 @@ do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	arm_notify_die("", regs, &info, fsr, 0);
 }
 
+
+static struct fsr_info ifsr_info[] = {
+	{ do_bad,		SIGBUS,  0,		"unknown 0"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 1"			   },
+	{ do_bad,		SIGBUS,  0,		"debug event"			   },
+	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"section access flag fault"	   },
+	{ do_bad,		SIGBUS,  0,		"unknown 4"			   },
+	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"section translation fault"	   },
+	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"page access flag fault"	   },
+	{ do_page_fault,	SIGSEGV, SEGV_MAPERR,	"page translation fault"	   },
+	{ do_bad,		SIGBUS,	 0,		"external abort on non-linefetch"  },
+	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"section domain fault"		   },
+	{ do_bad,		SIGBUS,  0,		"unknown 10"			   },
+	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"page domain fault"		   },
+	{ do_bad,		SIGBUS,	 0,		"external abort on translation"	   },
+	{ do_sect_fault,	SIGSEGV, SEGV_ACCERR,	"section permission fault"	   },
+	{ do_bad,		SIGBUS,	 0,		"external abort on translation"	   },
+	{ do_page_fault,	SIGSEGV, SEGV_ACCERR,	"page permission fault"		   },
+	{ do_bad,		SIGBUS,  0,		"unknown 16"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 17"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 18"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 19"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 20"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 21"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 22"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 23"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 24"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 25"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 26"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 27"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 28"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 29"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 30"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 31"			   },
+};
+
 asmlinkage void __exception
 do_PrefetchAbort(unsigned long addr, unsigned int ifsr, struct pt_regs *regs)
 {
-	do_translation_fault(addr, FSR_LNX_PF, regs);
+	const struct fsr_info *inf = ifsr_info + fsr_fs(ifsr);
+	struct siginfo info;
+
+	if (!inf->fn(addr, ifsr | FSR_LNX_PF, regs))
+		return;
+
+	printk(KERN_ALERT "Unhandled prefetch abort: %s (0x%03x) at 0x%08lx\n",
+		inf->name, ifsr, addr);
+
+	info.si_signo = inf->sig;
+	info.si_errno = 0;
+	info.si_code  = inf->code;
+	info.si_addr  = (void __user *)addr;
+	arm_notify_die("", regs, &info, ifsr, 0);
 }
 
-- 
cgit v1.2.3


From 1d2127123db9b1821959c2b8b7473dd7ffcdf527 Mon Sep 17 00:00:00 2001
From: Imre Deak <imre.deak@nokia.com>
Date: Mon, 5 Oct 2009 13:40:44 +0100
Subject: ARM: 5742/1: ARM: add debug check for invalid kernel page faults

According to the following in arch/arm/mm/fault.c page faults from
kernel mode are invalid if mmap_sem is already held and there is
no exception handler defined for the faulting instruction:

/*
 * As per x86, we may deadlock here.  However, since the kernel only
 * validly references user space from well defined areas of the code,
 * we can bug out early if this is from code which shouldn't.
 */
if (!down_read_trylock(&mm->mmap_sem)) {
	if (!user_mode(regs) && !search_exception_tables(regs->ARM_pc))
		goto no_context;

Since mmap_sem can be held at arbitrary times by another thread this
also means that any page faults from kernel mode are invalid if no
exception handler is defined for them, regardless whether mmap_sem is
held at the time of fault.

To easier detect code that can trigger the above error, add a check
also for the case where mmap_sem is acquired. As this has an overhead
make it a VM debug check.

Signed-off-by: Imre Deak <imre.deak@nokia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/fault.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index ae0e25f5a70..10e06801afb 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -292,6 +292,11 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 		 * down_read()
 		 */
 		might_sleep();
+#ifdef CONFIG_DEBUG_VM
+		if (!user_mode(regs) &&
+		    !search_exception_tables(regs->ARM_pc))
+			goto no_context;
+#endif
 	}
 
 	fault = __do_page_fault(mm, addr, fsr, tsk);
-- 
cgit v1.2.3


From 77da2d910a17e1e6a7e949578723d5aab58568d5 Mon Sep 17 00:00:00 2001
From: Jon Hunter <jon-hunter@ti.com>
Date: Sat, 27 Jun 2009 00:07:25 -0500
Subject: OMAP3: PM: Prevent hang in prcm_interrupt_handler

There are two scenarios where a race condition could result in a hang
in the prcm_interrupt handler. These are:

1). Waiting for PRM_IRQSTATUS_MPU register to clear.
Bit 0 of the PRM_IRQSTATUS_MPU register indicates that a wake-up event
is pending for the MPU. This bit can only be cleared if the all the
wake-up events latched in the various PM_WKST_x registers have been
cleared. If a wake-up event occurred during the processing of the prcm
interrupt handler, after the corresponding PM_WKST_x register was
checked but before the PRM_IRQSTATUS_MPU was cleared, then the CPU
would be stuck forever waiting for bit 0 in PRM_IRQSTATUS_MPU to be
cleared.

2). Waiting for the PM_WKST_x register to clear.
Some power domains have more than one wake-up source. The PM_WKST_x
registers indicate the source of a wake-up event and need to be cleared
after a wake-up event occurs. When the PM_WKST_x registers are read and
before they are cleared, it is possible that another wake-up event
could occur causing another bit to be set in one of the PM_WKST_x
registers. If this did occur after reading a PM_WKST_x register then
the CPU would miss this event and get stuck forever in a loop waiting
for that PM_WKST_x register to clear.

This patch address the above race conditions that would result in a
hang.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Reviewed-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/pm34xx.c | 143 ++++++++++++++++++-------------------------
 1 file changed, 60 insertions(+), 83 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 0ff5a6c53aa..1e7aae2ce5e 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -51,97 +51,74 @@ static void (*_omap_sram_idle)(u32 *addr, int save_state);
 
 static struct powerdomain *mpu_pwrdm;
 
-/* PRCM Interrupt Handler for wakeups */
-static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
+/*
+ * PRCM Interrupt Handler Helper Function
+ *
+ * The purpose of this function is to clear any wake-up events latched
+ * in the PRCM PM_WKST_x registers. It is possible that a wake-up event
+ * may occur whilst attempting to clear a PM_WKST_x register and thus
+ * set another bit in this register. A while loop is used to ensure
+ * that any peripheral wake-up events occurring while attempting to
+ * clear the PM_WKST_x are detected and cleared.
+ */
+static void prcm_clear_mod_irqs(s16 module, u8 regs)
 {
-	u32 wkst, irqstatus_mpu;
-	u32 fclk, iclk;
+	u32 wkst, fclk, iclk;
+	u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1;
+	u16 fclk_off = (regs == 3) ? OMAP3430ES2_CM_FCLKEN3 : CM_FCLKEN1;
+	u16 iclk_off = (regs == 3) ? CM_ICLKEN3 : CM_ICLKEN1;
 
-	/* WKUP */
-	wkst = prm_read_mod_reg(WKUP_MOD, PM_WKST);
+	wkst = prm_read_mod_reg(module, wkst_off);
 	if (wkst) {
-		iclk = cm_read_mod_reg(WKUP_MOD, CM_ICLKEN);
-		fclk = cm_read_mod_reg(WKUP_MOD, CM_FCLKEN);
-		cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_ICLKEN);
-		cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_FCLKEN);
-		prm_write_mod_reg(wkst, WKUP_MOD, PM_WKST);
-		while (prm_read_mod_reg(WKUP_MOD, PM_WKST))
-			cpu_relax();
-		cm_write_mod_reg(iclk, WKUP_MOD, CM_ICLKEN);
-		cm_write_mod_reg(fclk, WKUP_MOD, CM_FCLKEN);
-	}
-
-	/* CORE */
-	wkst = prm_read_mod_reg(CORE_MOD, PM_WKST1);
-	if (wkst) {
-		iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN1);
-		fclk = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
-		cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN1);
-		cm_set_mod_reg_bits(wkst, CORE_MOD, CM_FCLKEN1);
-		prm_write_mod_reg(wkst, CORE_MOD, PM_WKST1);
-		while (prm_read_mod_reg(CORE_MOD, PM_WKST1))
-			cpu_relax();
-		cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN1);
-		cm_write_mod_reg(fclk, CORE_MOD, CM_FCLKEN1);
-	}
-	wkst = prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3);
-	if (wkst) {
-		iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN3);
-		fclk = cm_read_mod_reg(CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
-		cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN3);
-		cm_set_mod_reg_bits(wkst, CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
-		prm_write_mod_reg(wkst, CORE_MOD, OMAP3430ES2_PM_WKST3);
-		while (prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3))
-			cpu_relax();
-		cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN3);
-		cm_write_mod_reg(fclk, CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
-	}
-
-	/* PER */
-	wkst = prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST);
-	if (wkst) {
-		iclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_ICLKEN);
-		fclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_FCLKEN);
-		cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_ICLKEN);
-		cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_FCLKEN);
-		prm_write_mod_reg(wkst, OMAP3430_PER_MOD, PM_WKST);
-		while (prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST))
-			cpu_relax();
-		cm_write_mod_reg(iclk, OMAP3430_PER_MOD, CM_ICLKEN);
-		cm_write_mod_reg(fclk, OMAP3430_PER_MOD, CM_FCLKEN);
+		iclk = cm_read_mod_reg(module, iclk_off);
+		fclk = cm_read_mod_reg(module, fclk_off);
+		while (wkst) {
+			cm_set_mod_reg_bits(wkst, module, iclk_off);
+			cm_set_mod_reg_bits(wkst, module, fclk_off);
+			prm_write_mod_reg(wkst, module, wkst_off);
+			wkst = prm_read_mod_reg(module, wkst_off);
+		}
+		cm_write_mod_reg(iclk, module, iclk_off);
+		cm_write_mod_reg(fclk, module, fclk_off);
 	}
+}
 
-	if (omap_rev() > OMAP3430_REV_ES1_0) {
-		/* USBHOST */
-		wkst = prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, PM_WKST);
-		if (wkst) {
-			iclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
-					       CM_ICLKEN);
-			fclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
-					       CM_FCLKEN);
-			cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD,
-					    CM_ICLKEN);
-			cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD,
-					    CM_FCLKEN);
-			prm_write_mod_reg(wkst, OMAP3430ES2_USBHOST_MOD,
-					  PM_WKST);
-			while (prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
-						PM_WKST))
-				cpu_relax();
-			cm_write_mod_reg(iclk, OMAP3430ES2_USBHOST_MOD,
-					 CM_ICLKEN);
-			cm_write_mod_reg(fclk, OMAP3430ES2_USBHOST_MOD,
-					 CM_FCLKEN);
+/*
+ * PRCM Interrupt Handler
+ *
+ * The PRM_IRQSTATUS_MPU register indicates if there are any pending
+ * interrupts from the PRCM for the MPU. These bits must be cleared in
+ * order to clear the PRCM interrupt. The PRCM interrupt handler is
+ * implemented to simply clear the PRM_IRQSTATUS_MPU in order to clear
+ * the PRCM interrupt. Please note that bit 0 of the PRM_IRQSTATUS_MPU
+ * register indicates that a wake-up event is pending for the MPU and
+ * this bit can only be cleared if the all the wake-up events latched
+ * in the various PM_WKST_x registers have been cleared. The interrupt
+ * handler is implemented using a do-while loop so that if a wake-up
+ * event occurred during the processing of the prcm interrupt handler
+ * (setting a bit in the corresponding PM_WKST_x register and thus
+ * preventing us from clearing bit 0 of the PRM_IRQSTATUS_MPU register)
+ * this would be handled.
+ */
+static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
+{
+	u32 irqstatus_mpu;
+
+	do {
+		prcm_clear_mod_irqs(WKUP_MOD, 1);
+		prcm_clear_mod_irqs(CORE_MOD, 1);
+		prcm_clear_mod_irqs(OMAP3430_PER_MOD, 1);
+		if (omap_rev() > OMAP3430_REV_ES1_0) {
+			prcm_clear_mod_irqs(CORE_MOD, 3);
+			prcm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1);
 		}
-	}
 
-	irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
-					 OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
-	prm_write_mod_reg(irqstatus_mpu, OCP_MOD,
-			  OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+		irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
+					OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+		prm_write_mod_reg(irqstatus_mpu, OCP_MOD,
+					OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
 
-	while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET))
-		cpu_relax();
+	} while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET));
 
 	return IRQ_HANDLED;
 }
-- 
cgit v1.2.3


From 5d80597801ff0d7e6b184504c04e9c1b3b61d16d Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Wed, 22 Jul 2009 10:18:07 -0700
Subject: OMAP3: PM: PRCM interrupt: check MPUGRPSEL register

PM_WKST register contents should be ANDed with the contents of the
MPUGRPSEL registers.  Otherwise the MPU PRCM interrupt handler could
wind up clearing wakeup events meant for the IVA PRCM interrupt
handler. A future revision to this code should be to read a cached
version of MPUGRPSEL from the powerdomain code, since PRM reads are
relatively slow.

Updated after Jon Hunter's PRCM IRQ change by Kevin Hilman

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/pm34xx.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 1e7aae2ce5e..0e7bd8e55f7 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -67,8 +67,11 @@ static void prcm_clear_mod_irqs(s16 module, u8 regs)
 	u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1;
 	u16 fclk_off = (regs == 3) ? OMAP3430ES2_CM_FCLKEN3 : CM_FCLKEN1;
 	u16 iclk_off = (regs == 3) ? CM_ICLKEN3 : CM_ICLKEN1;
+	u16 grpsel_off = (regs == 3) ?
+		OMAP3430ES2_PM_MPUGRPSEL3 : OMAP3430_PM_MPUGRPSEL;
 
 	wkst = prm_read_mod_reg(module, wkst_off);
+	wkst &= prm_read_mod_reg(module, grpsel_off);
 	if (wkst) {
 		iclk = cm_read_mod_reg(module, iclk_off);
 		fclk = cm_read_mod_reg(module, fclk_off);
-- 
cgit v1.2.3


From 8cb0ac999f253212bb01cd3c0d686489ec5911ad Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Wed, 22 Jul 2009 10:29:02 -0700
Subject: OMAP3: PM: PRCM interrupt: only handle selected PRCM interrupts

Clearing wakeup sources is now only done when the PRM indicates a
wakeup source interrupt.  Since we don't handle any other types of
PRCM interrupts right now, warn if we get any other type of PRCM
interrupt.  Either code needs to be added to the PRCM interrupt
handler to react to these, or these other interrupts should be masked
off at init.

Updated after Jon Hunter's PRCM IRQ rework by Kevin Hilman.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/pm34xx.c | 46 +++++++++++++++++++++++++++++++++++---------
 1 file changed, 37 insertions(+), 9 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 0e7bd8e55f7..d9440a18bd0 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -61,7 +61,7 @@ static struct powerdomain *mpu_pwrdm;
  * that any peripheral wake-up events occurring while attempting to
  * clear the PM_WKST_x are detected and cleared.
  */
-static void prcm_clear_mod_irqs(s16 module, u8 regs)
+static int prcm_clear_mod_irqs(s16 module, u8 regs)
 {
 	u32 wkst, fclk, iclk;
 	u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1;
@@ -69,6 +69,7 @@ static void prcm_clear_mod_irqs(s16 module, u8 regs)
 	u16 iclk_off = (regs == 3) ? CM_ICLKEN3 : CM_ICLKEN1;
 	u16 grpsel_off = (regs == 3) ?
 		OMAP3430ES2_PM_MPUGRPSEL3 : OMAP3430_PM_MPUGRPSEL;
+	int c = 0;
 
 	wkst = prm_read_mod_reg(module, wkst_off);
 	wkst &= prm_read_mod_reg(module, grpsel_off);
@@ -80,10 +81,28 @@ static void prcm_clear_mod_irqs(s16 module, u8 regs)
 			cm_set_mod_reg_bits(wkst, module, fclk_off);
 			prm_write_mod_reg(wkst, module, wkst_off);
 			wkst = prm_read_mod_reg(module, wkst_off);
+			c++;
 		}
 		cm_write_mod_reg(iclk, module, iclk_off);
 		cm_write_mod_reg(fclk, module, fclk_off);
 	}
+
+	return c;
+}
+
+static int _prcm_int_handle_wakeup(void)
+{
+	int c;
+
+	c = prcm_clear_mod_irqs(WKUP_MOD, 1);
+	c += prcm_clear_mod_irqs(CORE_MOD, 1);
+	c += prcm_clear_mod_irqs(OMAP3430_PER_MOD, 1);
+	if (omap_rev() > OMAP3430_REV_ES1_0) {
+		c += prcm_clear_mod_irqs(CORE_MOD, 3);
+		c += prcm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1);
+	}
+
+	return c;
 }
 
 /*
@@ -106,18 +125,27 @@ static void prcm_clear_mod_irqs(s16 module, u8 regs)
 static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
 {
 	u32 irqstatus_mpu;
+	int c = 0;
 
 	do {
-		prcm_clear_mod_irqs(WKUP_MOD, 1);
-		prcm_clear_mod_irqs(CORE_MOD, 1);
-		prcm_clear_mod_irqs(OMAP3430_PER_MOD, 1);
-		if (omap_rev() > OMAP3430_REV_ES1_0) {
-			prcm_clear_mod_irqs(CORE_MOD, 3);
-			prcm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1);
-		}
-
 		irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
 					OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
+		if (irqstatus_mpu & (OMAP3430_WKUP_ST | OMAP3430_IO_ST)) {
+			c = _prcm_int_handle_wakeup();
+
+			/*
+			 * Is the MPU PRCM interrupt handler racing with the
+			 * IVA2 PRCM interrupt handler ?
+			 */
+			WARN(c == 0, "prcm: WARNING: PRCM indicated MPU wakeup "
+			     "but no wakeup sources are marked\n");
+		} else {
+			/* XXX we need to expand our PRCM interrupt handler */
+			WARN(1, "prcm: WARNING: PRCM interrupt received, but "
+			     "no code to handle it (%08x)\n", irqstatus_mpu);
+		}
+
 		prm_write_mod_reg(irqstatus_mpu, OCP_MOD,
 					OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
 
-- 
cgit v1.2.3


From 71a807757394205cdb1465d68a4f0be50fd6f04b Mon Sep 17 00:00:00 2001
From: Vikram Pandita <vikram.pandita@ti.com>
Date: Fri, 17 Jul 2009 19:33:09 -0500
Subject: OMAP3: PM: USBHOST: clear wakeup events on both hosts

USBHOST module has 2 fclocks (for HOST1 and HOST2), only one iclock
and only a single bit in the WKST register to indicate a wakeup event.

Because of the single WKST bit, we cannot know whether a wakeup event
was on HOST1 or HOST2, so enable both fclocks before clearing the
wakeup event to ensure both hosts can properly clear the event.

Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/pm34xx.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index d9440a18bd0..cf6ea9f318f 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -63,7 +63,7 @@ static struct powerdomain *mpu_pwrdm;
  */
 static int prcm_clear_mod_irqs(s16 module, u8 regs)
 {
-	u32 wkst, fclk, iclk;
+	u32 wkst, fclk, iclk, clken;
 	u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1;
 	u16 fclk_off = (regs == 3) ? OMAP3430ES2_CM_FCLKEN3 : CM_FCLKEN1;
 	u16 iclk_off = (regs == 3) ? CM_ICLKEN3 : CM_ICLKEN1;
@@ -77,8 +77,15 @@ static int prcm_clear_mod_irqs(s16 module, u8 regs)
 		iclk = cm_read_mod_reg(module, iclk_off);
 		fclk = cm_read_mod_reg(module, fclk_off);
 		while (wkst) {
-			cm_set_mod_reg_bits(wkst, module, iclk_off);
-			cm_set_mod_reg_bits(wkst, module, fclk_off);
+			clken = wkst;
+			cm_set_mod_reg_bits(clken, module, iclk_off);
+			/*
+			 * For USBHOST, we don't know whether HOST1 or
+			 * HOST2 woke us up, so enable both f-clocks
+			 */
+			if (module == OMAP3430ES2_USBHOST_MOD)
+				clken |= 1 << OMAP3430ES2_EN_USBHOST2_SHIFT;
+			cm_set_mod_reg_bits(clken, module, fclk_off);
 			prm_write_mod_reg(wkst, module, wkst_off);
 			wkst = prm_read_mod_reg(module, wkst_off);
 			c++;
-- 
cgit v1.2.3


From eb350f74ebff9573641c5fb689fb071b695ef35b Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Thu, 10 Sep 2009 15:53:08 +0000
Subject: OMAP3: PM: Enable GPIO module-level wakeups

Currently, only GPIOs in the wakeup domain (GPIOs in bank 0) are
enabled as wakups.  This patch also enables GPIOs in the PER
powerdomain (banks 2-6) to be used as possible wakeup sources.

In addition, this patch ensures that all GPIO wakeups can wakeup
the MPU using the PM_MPUGRPSEL_<pwrdm> registers.

NOTE: this doesn't enable the individual GPIOs as wakeups, this simply
enables the per-bank wakeups at the powerdomain level.

This problem was discovered by Mike Chan when preventing the CORE
powerdomain from going into retention/off.  When CORE was allowed to
hit retention, GPIO wakeups via IO pad were working fine, but when
CORE remained on, GPIO module-level wakeups were not working properly.

To test, prevent CORE from going inactive/retention/off, thus
preventing the IO chain from being armed:

  # echo 3 > /debug/pm_debug/core_pwrdm/suspend

This ensures that GPIO wakeups happen via module-level wakeups and
not via IO pad.

Tested on 3430SDP using the touchscreen GPIO (gpio 2, in WKUP)
Tested on Zoom2 using the QUART interrup GPIO  (gpio 102, in PER)

Also, c.f. OMAP PM wiki for troubleshooting GPIO wakeup issues:
http://elinux.org/OMAP_Power_Management

Reported-by: Mike Chan <mikechan@google.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/pm34xx.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index cf6ea9f318f..378c2f61835 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -639,6 +639,16 @@ static void __init prcm_setup_regs(void)
 	prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN,
 			  OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
 
+	/* Enable GPIO wakeups in PER */
+	prm_write_mod_reg(OMAP3430_EN_GPIO2 | OMAP3430_EN_GPIO3 |
+			  OMAP3430_EN_GPIO4 | OMAP3430_EN_GPIO5 |
+			  OMAP3430_EN_GPIO6, OMAP3430_PER_MOD, PM_WKEN);
+	/* and allow them to wake up MPU */
+	prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2 | OMAP3430_EN_GPIO3 |
+			  OMAP3430_GRPSEL_GPIO4 | OMAP3430_EN_GPIO5 |
+			  OMAP3430_GRPSEL_GPIO6,
+			  OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
+
 	/* Don't attach IVA interrupts */
 	prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
 	prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
-- 
cgit v1.2.3


From ee894b18e064447f86019af38a90ccb091880942 Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Thu, 1 Oct 2009 10:01:55 +0300
Subject: OMAP3: PM: introduce a new powerdomain walk helper

The 'pwrdm_for_each()' function walks powerdomains with a spinlock
locked, so the the callbacks cannot do anything which may sleep.
This patch introduces a 'pwrdm_for_each_nolock()' helper which does
the same, but without the spinlock locked. This fixes the following
lockdep warning:

[    0.000000] WARNING: at kernel/lockdep.c:2460 lockdep_trace_alloc+0xac/0xec()
[    0.000000] Modules linked in:
(unwind_backtrace+0x0/0xdc) from [<c0045464>] (warn_slowpath_common+0x48/0x60)
(warn_slowpath_common+0x48/0x60) from [<c0067dd4>] (lockdep_trace_alloc+0xac/0xec)
(lockdep_trace_alloc+0xac/0xec) from [<c009da14>] (kmem_cache_alloc+0x1c/0xd0)
(kmem_cache_alloc+0x1c/0xd0) from [<c00b21d8>] (d_alloc+0x1c/0x1a4)
(d_alloc+0x1c/0x1a4) from [<c00a887c>] (__lookup_hash+0xd8/0x118)
(__lookup_hash+0xd8/0x118) from [<c00a9f20>] (lookup_one_len+0x84/0x94)
(lookup_one_len+0x84/0x94) from [<c010d12c>] (debugfs_create_file+0x8c/0x20c)
(debugfs_create_file+0x8c/0x20c) from [<c010d320>] (debugfs_create_dir+0x1c/0x20)
(debugfs_create_dir+0x1c/0x20) from [<c000e8cc>] (pwrdms_setup+0x60/0x90)
(pwrdms_setup+0x60/0x90) from [<c002e010>] (pwrdm_for_each+0x30/0x80)
(pwrdm_for_each+0x30/0x80) from [<c000e79c>] (pm_dbg_init+0x7c/0x14c)
(pm_dbg_init+0x7c/0x14c) from [<c00232b4>] (do_one_initcall+0x5c/0x1b8)
(do_one_initcall+0x5c/0x1b8) from [<c00083f8>] (kernel_init+0x90/0x10c)
(kernel_init+0x90/0x10c) from [<c00242c4>] (kernel_thread_exit+0x0/0x8)

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/pm-debug.c                |  4 +--
 arch/arm/mach-omap2/powerdomain.c             | 39 ++++++++++++++++++---------
 arch/arm/plat-omap/include/mach/powerdomain.h |  2 ++
 3 files changed, 31 insertions(+), 14 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 1b4c1600f8d..2fc4d6abbd0 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -541,7 +541,7 @@ static int __init pm_dbg_init(void)
 		printk(KERN_ERR "%s: only OMAP3 supported\n", __func__);
 		return -ENODEV;
 	}
-		
+
 	d = debugfs_create_dir("pm_debug", NULL);
 	if (IS_ERR(d))
 		return PTR_ERR(d);
@@ -551,7 +551,7 @@ static int __init pm_dbg_init(void)
 	(void) debugfs_create_file("time", S_IRUGO,
 		d, (void *)DEBUG_FILE_TIMERS, &debug_fops);
 
-	pwrdm_for_each(pwrdms_setup, (void *)d);
+	pwrdm_for_each_nolock(pwrdms_setup, (void *)d);
 
 	pm_dbg_dir = debugfs_create_dir("registers", d);
 	if (IS_ERR(pm_dbg_dir))
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 2594cbff394..f00289abd30 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -273,35 +273,50 @@ struct powerdomain *pwrdm_lookup(const char *name)
 }
 
 /**
- * pwrdm_for_each - call function on each registered clockdomain
+ * pwrdm_for_each_nolock - call function on each registered clockdomain
  * @fn: callback function *
  *
  * Call the supplied function for each registered powerdomain.  The
  * callback function can return anything but 0 to bail out early from
- * the iterator.  The callback function is called with the pwrdm_rwlock
- * held for reading, so no powerdomain structure manipulation
- * functions should be called from the callback, although hardware
- * powerdomain control functions are fine.  Returns the last return
- * value of the callback function, which should be 0 for success or
- * anything else to indicate failure; or -EINVAL if the function
- * pointer is null.
+ * the iterator.  Returns the last return value of the callback function, which
+ * should be 0 for success or anything else to indicate failure; or -EINVAL if
+ * the function pointer is null.
  */
-int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
-			void *user)
+int pwrdm_for_each_nolock(int (*fn)(struct powerdomain *pwrdm, void *user),
+				void *user)
 {
 	struct powerdomain *temp_pwrdm;
-	unsigned long flags;
 	int ret = 0;
 
 	if (!fn)
 		return -EINVAL;
 
-	read_lock_irqsave(&pwrdm_rwlock, flags);
 	list_for_each_entry(temp_pwrdm, &pwrdm_list, node) {
 		ret = (*fn)(temp_pwrdm, user);
 		if (ret)
 			break;
 	}
+
+	return ret;
+}
+
+/**
+ * pwrdm_for_each - call function on each registered clockdomain
+ * @fn: callback function *
+ *
+ * This function is the same as 'pwrdm_for_each_nolock()', but keeps the
+ * &pwrdm_rwlock locked for reading, so no powerdomain structure manipulation
+ * functions should be called from the callback, although hardware powerdomain
+ * control functions are fine.
+ */
+int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
+			void *user)
+{
+	unsigned long flags;
+	int ret;
+
+	read_lock_irqsave(&pwrdm_rwlock, flags);
+	ret = pwrdm_for_each_nolock(fn, user);
 	read_unlock_irqrestore(&pwrdm_rwlock, flags);
 
 	return ret;
diff --git a/arch/arm/plat-omap/include/mach/powerdomain.h b/arch/arm/plat-omap/include/mach/powerdomain.h
index 6271d8556a4..fa6461423bd 100644
--- a/arch/arm/plat-omap/include/mach/powerdomain.h
+++ b/arch/arm/plat-omap/include/mach/powerdomain.h
@@ -135,6 +135,8 @@ struct powerdomain *pwrdm_lookup(const char *name);
 
 int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
 			void *user);
+int pwrdm_for_each_nolock(int (*fn)(struct powerdomain *pwrdm, void *user),
+			void *user);
 
 int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
 int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
-- 
cgit v1.2.3


From a9f82d10d1c20b433a12b08e6e78bced6f596c5f Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 5 Oct 2009 13:31:43 -0700
Subject: omap: Fix incorrect 730 vs 850 detection

Commit cd92204924fafbd5c7241dfd12ca3176d542e0c5 added
support for omap850. However, the patch accidentally
removed the wrong ifdef:

 #  define cpu_is_omap730()		1
 # endif
 #endif
+#else
+# if defined(CONFIG_ARCH_OMAP850)
+#  undef  cpu_is_omap850
+#  define cpu_is_omap850()		1
+# endif
+#endif

...

 void omap2_check_revision(void);

 #endif    /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */
-
-#endif

Instead of removing removing the #endif at the end of the file,
the #endif before #else should have been removed.

But we cannot have multiple #else statements as pointed out by
Alistair Buxton <a.j.buxton@gmail.com>. So the fix is to:

- remove the non-multi-omap special handling, as we need to
  detect between omap730 and omap850 anyways.

- add the missing #endif back to the end of the file

Reported-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/include/mach/cpu.h | 37 +++++++++++++----------------------
 1 file changed, 14 insertions(+), 23 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
index 11e73d9e892..f129efb3075 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -303,32 +303,21 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define cpu_is_omap2430()		0
 #define cpu_is_omap3430()		0
 
-#if defined(MULTI_OMAP1)
-# if defined(CONFIG_ARCH_OMAP730)
-#  undef  cpu_is_omap730
-#  define cpu_is_omap730()		is_omap730()
-# endif
-# if defined(CONFIG_ARCH_OMAP850)
-#  undef  cpu_is_omap850
-#  define cpu_is_omap850()		is_omap850()
-# endif
-#else
-# if defined(CONFIG_ARCH_OMAP730)
-#  undef  cpu_is_omap730
-#  define cpu_is_omap730()		1
-# endif
-#endif
-#else
-# if defined(CONFIG_ARCH_OMAP850)
-#  undef  cpu_is_omap850
-#  define cpu_is_omap850()		1
-# endif
-#endif
-
 /*
  * Whether we have MULTI_OMAP1 or not, we still need to distinguish
- * between 330 vs. 1510 and 1611B/5912 vs. 1710.
+ * between 730 vs 850, 330 vs. 1510 and 1611B/5912 vs. 1710.
  */
+
+#if defined(CONFIG_ARCH_OMAP730)
+# undef  cpu_is_omap730
+# define cpu_is_omap730()		is_omap730()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP850)
+# undef  cpu_is_omap850
+# define cpu_is_omap850()		is_omap850()
+#endif
+
 #if defined(CONFIG_ARCH_OMAP15XX)
 # undef  cpu_is_omap310
 # undef  cpu_is_omap1510
@@ -433,3 +422,5 @@ IS_OMAP_TYPE(3430, 0x3430)
 
 int omap_chip_is(struct omap_chip_id oci);
 void omap2_check_revision(void);
+
+#endif
-- 
cgit v1.2.3


From 7a66a39b8599e09c82e2e95fec55f414ad015282 Mon Sep 17 00:00:00 2001
From: Rajendra Nayak <rnayak@ti.com>
Date: Mon, 5 Oct 2009 13:31:44 -0700
Subject: omap: Lock DPLL5 at boot

Lock DPLL5 at 120MHz at boot. The USBHOST 120MHz f-clock and
USBTLL f-clock are the only users of this DPLL, and 120MHz is
is the only recommended rate for these clocks.

With this patch, the 60 MHz ULPI clock is generated correctly.

Tested on an OMAP3430 SDP.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/clock34xx.c | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index fafcd32e690..489556eecbd 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -338,6 +338,13 @@ static struct omap_clk omap34xx_clks[] = {
  */
 #define SDRC_MPURATE_LOOPS		96
 
+/*
+ * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks
+ * that are sourced by DPLL5, and both of these require this clock
+ * to be at 120 MHz for proper operation.
+ */
+#define DPLL5_FREQ_FOR_USBHOST		120000000
+
 /**
  * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
  * @clk: struct clk * being enabled
@@ -1056,6 +1063,28 @@ void omap2_clk_prepare_for_reboot(void)
 #endif
 }
 
+static void omap3_clk_lock_dpll5(void)
+{
+	struct clk *dpll5_clk;
+	struct clk *dpll5_m2_clk;
+
+	dpll5_clk = clk_get(NULL, "dpll5_ck");
+	clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
+	clk_enable(dpll5_clk);
+
+	/* Enable autoidle to allow it to enter low power bypass */
+	omap3_dpll_allow_idle(dpll5_clk);
+
+	/* Program dpll5_m2_clk divider for no division */
+	dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
+	clk_enable(dpll5_m2_clk);
+	clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST);
+
+	clk_disable(dpll5_m2_clk);
+	clk_disable(dpll5_clk);
+	return;
+}
+
 /* REVISIT: Move this init stuff out into clock.c */
 
 /*
@@ -1148,6 +1177,12 @@ int __init omap2_clk_init(void)
 	 */
 	clk_enable_init_clocks();
 
+	/*
+	 * Lock DPLL5 and put it in autoidle.
+	 */
+	if (omap_rev() >= OMAP3430_REV_ES2_0)
+		omap3_clk_lock_dpll5();
+
 	/* Avoid sleeping during omap2_clk_prepare_for_reboot() */
 	/* REVISIT: not yet ready for 343x */
 #if 0
-- 
cgit v1.2.3


From acf442dc560437858e6a4c904678052616f8226e Mon Sep 17 00:00:00 2001
From: Amit Kucheria <amit.kucheria@verdurent.com>
Date: Mon, 5 Oct 2009 21:43:44 -0700
Subject: Input: fix rx51 board keymap

The original driver was written with the KEY() macro defined as (col,
row) instead of (row, col) as defined by the matrix keypad
infrastructure. So the keymap was defined accordingly. Since the
driver that was merged upstream uses the matrix keypad infrastructure,
modify the keymap accordingly.

While we are at it, fix the comments in twl4030.h and define
PERSISTENT_KEY as (r,c) instead of (c, r)

Tested on a RX51 (N900) device.

Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 arch/arm/mach-omap2/board-rx51-peripherals.c | 78 ++++++++++++++--------------
 1 file changed, 39 insertions(+), 39 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 56d931a425f..b5ce7a07999 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -37,49 +37,49 @@
 
 static int rx51_keymap[] = {
 	KEY(0, 0, KEY_Q),
-	KEY(0, 1, KEY_W),
-	KEY(0, 2, KEY_E),
-	KEY(0, 3, KEY_R),
-	KEY(0, 4, KEY_T),
-	KEY(0, 5, KEY_Y),
-	KEY(0, 6, KEY_U),
-	KEY(0, 7, KEY_I),
-	KEY(1, 0, KEY_O),
+	KEY(0, 1, KEY_O),
+	KEY(0, 2, KEY_P),
+	KEY(0, 3, KEY_COMMA),
+	KEY(0, 4, KEY_BACKSPACE),
+	KEY(0, 6, KEY_A),
+	KEY(0, 7, KEY_S),
+	KEY(1, 0, KEY_W),
 	KEY(1, 1, KEY_D),
-	KEY(1, 2, KEY_DOT),
-	KEY(1, 3, KEY_V),
-	KEY(1, 4, KEY_DOWN),
-	KEY(2, 0, KEY_P),
-	KEY(2, 1, KEY_F),
+	KEY(1, 2, KEY_F),
+	KEY(1, 3, KEY_G),
+	KEY(1, 4, KEY_H),
+	KEY(1, 5, KEY_J),
+	KEY(1, 6, KEY_K),
+	KEY(1, 7, KEY_L),
+	KEY(2, 0, KEY_E),
+	KEY(2, 1, KEY_DOT),
 	KEY(2, 2, KEY_UP),
-	KEY(2, 3, KEY_B),
-	KEY(2, 4, KEY_RIGHT),
-	KEY(3, 0, KEY_COMMA),
-	KEY(3, 1, KEY_G),
-	KEY(3, 2, KEY_ENTER),
+	KEY(2, 3, KEY_ENTER),
+	KEY(2, 5, KEY_Z),
+	KEY(2, 6, KEY_X),
+	KEY(2, 7, KEY_C),
+	KEY(3, 0, KEY_R),
+	KEY(3, 1, KEY_V),
+	KEY(3, 2, KEY_B),
 	KEY(3, 3, KEY_N),
-	KEY(4, 0, KEY_BACKSPACE),
-	KEY(4, 1, KEY_H),
-	KEY(4, 3, KEY_M),
+	KEY(3, 4, KEY_M),
+	KEY(3, 5, KEY_SPACE),
+	KEY(3, 6, KEY_SPACE),
+	KEY(3, 7, KEY_LEFT),
+	KEY(4, 0, KEY_T),
+	KEY(4, 1, KEY_DOWN),
+	KEY(4, 2, KEY_RIGHT),
 	KEY(4, 4, KEY_LEFTCTRL),
-	KEY(5, 1, KEY_J),
-	KEY(5, 2, KEY_Z),
-	KEY(5, 3, KEY_SPACE),
-	KEY(5, 4, KEY_LEFTSHIFT),
-	KEY(6, 0, KEY_A),
-	KEY(6, 1, KEY_K),
-	KEY(6, 2, KEY_X),
-	KEY(6, 3, KEY_SPACE),
-	KEY(6, 4, KEY_FN),
-	KEY(7, 0, KEY_S),
-	KEY(7, 1, KEY_L),
-	KEY(7, 2, KEY_C),
-	KEY(7, 3, KEY_LEFT),
-	KEY(0xff, 0, KEY_F6),
-	KEY(0xff, 1, KEY_F7),
-	KEY(0xff, 2, KEY_F8),
-	KEY(0xff, 4, KEY_F9),
-	KEY(0xff, 5, KEY_F10),
+	KEY(4, 5, KEY_RIGHTALT),
+	KEY(4, 6, KEY_LEFTSHIFT),
+	KEY(5, 0, KEY_Y),
+	KEY(6, 0, KEY_U),
+	KEY(7, 0, KEY_I),
+	KEY(7, 1, KEY_F7),
+	KEY(7, 2, KEY_F8),
+	KEY(0xff, 2, KEY_F9),
+	KEY(0xff, 4, KEY_F10),
+	KEY(0xff, 5, KEY_F11),
 };
 
 static struct twl4030_keypad_data rx51_kp_data = {
-- 
cgit v1.2.3


From 913b143ffac8ade63e576c4cb48908a257106bdc Mon Sep 17 00:00:00 2001
From: ye janboe <janboe.ye@gmail.com>
Date: Mon, 5 Oct 2009 13:31:44 -0700
Subject: omap: SRAM: flush the right address after memcpy in omap_sram_push

the original flush operation is to flush the function address which is
copied from.
But we do not change the function code and it is not necessary to flush it.

Signed-off-by: janboe <janboe.ye@gmail.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/sram.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 925f64711c3..75d1f26e5b1 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -270,7 +270,8 @@ void * omap_sram_push(void * start, unsigned long size)
 	omap_sram_ceil -= size;
 	omap_sram_ceil = ROUND_DOWN(omap_sram_ceil, sizeof(void *));
 	memcpy((void *)omap_sram_ceil, start, size);
-	flush_icache_range((unsigned long)start, (unsigned long)(start + size));
+	flush_icache_range((unsigned long)omap_sram_ceil,
+		(unsigned long)(omap_sram_ceil + size));
 
 	return (void *)omap_sram_ceil;
 }
-- 
cgit v1.2.3


From ba6a117944f958a5b3fb6631b9ac7eaed3a4cb2a Mon Sep 17 00:00:00 2001
From: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Date: Mon, 5 Oct 2009 13:31:45 -0700
Subject: omap: iovmm: Fix incorrect spelling

Fix incorrect spelling

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/iovmm.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c
index 57f7122a091..0e5573d5bb5 100644
--- a/arch/arm/plat-omap/iovmm.c
+++ b/arch/arm/plat-omap/iovmm.c
@@ -47,7 +47,7 @@
  *	'va':	mpu virtual address
  *
  *	'c':	contiguous memory area
- *	'd':	dicontiguous memory area
+ *	'd':	discontiguous memory area
  *	'a':	anonymous memory allocation
  *	'()':	optional feature
  *
@@ -398,7 +398,7 @@ static inline void sgtable_drain_vmalloc(struct sg_table *sgt)
 {
 	/*
 	 * Actually this is not necessary at all, just exists for
-	 * consistency of the code readibility.
+	 * consistency of the code readability.
 	 */
 	BUG_ON(!sgt);
 }
@@ -434,7 +434,7 @@ static inline void sgtable_drain_kmalloc(struct sg_table *sgt)
 {
 	/*
 	 * Actually this is not necessary at all, just exists for
-	 * consistency of the code readibility
+	 * consistency of the code readability
 	 */
 	BUG_ON(!sgt);
 }
-- 
cgit v1.2.3


From 265489003c463f3d78d622fba60d56d16b3009dd Mon Sep 17 00:00:00 2001
From: Daniel Walker <dwalker@fifo99.com>
Date: Mon, 5 Oct 2009 13:31:45 -0700
Subject: omap: iovmm: Add missing mutex_unlock

I was using Coccinelle with the mutex_unlock semantic patch, and it
unconvered this problem. It appears to be a valid missing unlock issue.
This change should correct it by moving the unlock below the label.

This patch is against the mainline kernel.

Cc: Julia Lawall <julia@diku.dk>
Cc: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Daniel Walker <dwalker@fifo99.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/iovmm.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c
index 0e5573d5bb5..dc3fac3dd0e 100644
--- a/arch/arm/plat-omap/iovmm.c
+++ b/arch/arm/plat-omap/iovmm.c
@@ -363,8 +363,9 @@ void *da_to_va(struct iommu *obj, u32 da)
 		goto out;
 	}
 	va = area->va;
-	mutex_unlock(&obj->mmap_lock);
 out:
+	mutex_unlock(&obj->mmap_lock);
+
 	return va;
 }
 EXPORT_SYMBOL_GPL(da_to_va);
-- 
cgit v1.2.3


From 1f8db4fc1271a42496778c0ff18153da56f0f844 Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Mon, 5 Oct 2009 19:34:43 +0100
Subject: ARM: 5744/1: ep93xx: add remaining phys offset selections

This adds the missing Kconfig options for the first SDRAM bank address
on ep93xx boards.

Cc: Hubert Feurstein <(address hidden)>
Signed-off-by: H Hartley Sweeten <(address hidden)>
Acked-by: Ryan Mallon <(address hidden)>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/Kconfig               | 22 ++++++++++++++++++++--
 arch/arm/mach-ep93xx/Makefile.boot         |  9 +++++++++
 arch/arm/mach-ep93xx/include/mach/memory.h |  6 ++++++
 3 files changed, 35 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index d7291c682a6..6675c051f62 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -17,13 +17,31 @@ config EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	bool "0x00000000 - SDCE3/SyncBoot"
 	help
 	  Select this option if you want support for EP93xx boards with the
-	  first SDRAM bank at 0x00000000
+	  first SDRAM bank at 0x00000000.
 
 config EP93XX_SDCE0_PHYS_OFFSET
 	bool "0xc0000000 - SDCEO"
 	help
 	  Select this option if you want support for EP93xx boards with the
-	  first SDRAM bank at 0xc0000000
+	  first SDRAM bank at 0xc0000000.
+
+config EP93XX_SDCE1_PHYS_OFFSET
+	bool "0xd0000000 - SDCE1"
+	help
+	  Select this option if you want support for EP93xx boards with the
+	  first SDRAM bank at 0xd0000000.
+
+config EP93XX_SDCE2_PHYS_OFFSET
+	bool "0xe0000000 - SDCE2"
+	help
+	  Select this option if you want support for EP93xx boards with the
+	  first SDRAM bank at 0xe0000000.
+
+config EP93XX_SDCE3_ASYNC_PHYS_OFFSET
+	bool "0xf0000000 - SDCE3/AsyncBoot"
+	help
+	  Select this option if you want support for EP93xx boards with the
+	  first SDRAM bank at 0xf0000000.
 
 endchoice
 
diff --git a/arch/arm/mach-ep93xx/Makefile.boot b/arch/arm/mach-ep93xx/Makefile.boot
index 27a085a8f12..0ad33f15c62 100644
--- a/arch/arm/mach-ep93xx/Makefile.boot
+++ b/arch/arm/mach-ep93xx/Makefile.boot
@@ -3,3 +3,12 @@ params_phys-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET)	:= 0x00000100
 
    zreladdr-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)		:= 0xc0008000
 params_phys-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)		:= 0xc0000100
+
+   zreladdr-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET)		:= 0xd0008000
+params_phys-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET)		:= 0xd0000100
+
+   zreladdr-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET)		:= 0xe0008000
+params_phys-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET)		:= 0xe0000100
+
+   zreladdr-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET)	:= 0xf0008000
+params_phys-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET)	:= 0xf0000100
diff --git a/arch/arm/mach-ep93xx/include/mach/memory.h b/arch/arm/mach-ep93xx/include/mach/memory.h
index 925b12ea099..554064e9030 100644
--- a/arch/arm/mach-ep93xx/include/mach/memory.h
+++ b/arch/arm/mach-ep93xx/include/mach/memory.h
@@ -9,6 +9,12 @@
 #define PHYS_OFFSET		UL(0x00000000)
 #elif defined(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)
 #define PHYS_OFFSET		UL(0xc0000000)
+#elif defined(CONFIG_EP93XX_SDCE1_PHYS_OFFSET)
+#define PHYS_OFFSET		UL(0xd0000000)
+#elif defined(CONFIG_EP93XX_SDCE2_PHYS_OFFSET)
+#define PHYS_OFFSET		UL(0xe0000000)
+#elif defined(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET)
+#define PHYS_OFFSET		UL(0xf0000000)
 #else
 #error "Kconfig bug: No EP93xx PHYS_OFFSET set"
 #endif
-- 
cgit v1.2.3


From cc1ad4a69667be885ac6036a315066854ef8c871 Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Mon, 5 Oct 2009 23:15:32 +0100
Subject: ARM: 5745/1: Change ep93xx gpio_irq static inlines to macros

From: Ryan Mallon <ryan@bluewatersys.com>

Change the gpio_to_irq and irq_to_gpio static inline functions to
macros so that they can be used in variable initialisers.

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/include/mach/gpio.h | 16 ++++------------
 1 file changed, 4 insertions(+), 12 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-ep93xx/include/mach/gpio.h b/arch/arm/mach-ep93xx/include/mach/gpio.h
index 0a1498ae899..c991b149bdf 100644
--- a/arch/arm/mach-ep93xx/include/mach/gpio.h
+++ b/arch/arm/mach-ep93xx/include/mach/gpio.h
@@ -114,17 +114,9 @@ extern void ep93xx_gpio_int_debounce(unsigned int irq, int enable);
  *          B0..B7  (7..15) to irq 72..79, and
  *          F0..F7 (16..24) to irq 80..87.
  */
-static inline int gpio_to_irq(unsigned gpio)
-{
-	if (gpio <= EP93XX_GPIO_LINE_MAX_IRQ)
-		return 64 + gpio;
-
-	return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return irq - gpio_to_irq(0);
-}
+#define gpio_to_irq(gpio)	\
+	(((gpio) <= EP93XX_GPIO_LINE_MAX_IRQ) ? (64 + (gpio)) : -EINVAL)
+
+#define irq_to_gpio(irq)	((irq) - gpio_to_irq(0))
 
 #endif
-- 
cgit v1.2.3


From 32cfb1b16f2b68d2296536811cadfffe26a06c1b Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Tue, 6 Oct 2009 17:57:09 +0100
Subject: ARM: 5746/1: Handle possible translation errors in ARMv6/v7
 coherent_user_range

This is needed because applications using the sys_cacheflush system call
can pass a memory range which isn't mapped yet even though the
corresponding vma is valid. The patch also adds unwinding annotations
for correct backtraces from the coherent_user_range() functions.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/cache-v6.S | 20 ++++++++++++++++++--
 arch/arm/mm/cache-v7.S | 19 +++++++++++++++++--
 2 files changed, 35 insertions(+), 4 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S
index 8f5c13f4c93..295e25dd638 100644
--- a/arch/arm/mm/cache-v6.S
+++ b/arch/arm/mm/cache-v6.S
@@ -12,6 +12,7 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/assembler.h>
+#include <asm/unwind.h>
 
 #include "proc-macros.S"
 
@@ -121,11 +122,13 @@ ENTRY(v6_coherent_kern_range)
  *	- the Icache does not read data from the write buffer
  */
 ENTRY(v6_coherent_user_range)
-
+ UNWIND(.fnstart		)
 #ifdef HARVARD_CACHE
 	bic	r0, r0, #CACHE_LINE_SIZE - 1
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D line
+1:
+ USER(	mcr	p15, 0, r0, c7, c10, 1	)	@ clean D line
 	add	r0, r0, #CACHE_LINE_SIZE
+2:
 	cmp	r0, r1
 	blo	1b
 #endif
@@ -142,6 +145,19 @@ ENTRY(v6_coherent_user_range)
 #endif
 	mov	pc, lr
 
+/*
+ * Fault handling for the cache operation above. If the virtual address in r0
+ * isn't mapped, just try the next page.
+ */
+9001:
+	mov	r0, r0, lsr #12
+	mov	r0, r0, lsl #12
+	add	r0, r0, #4096
+	b	2b
+ UNWIND(.fnend		)
+ENDPROC(v6_coherent_user_range)
+ENDPROC(v6_coherent_kern_range)
+
 /*
  *	v6_flush_kern_dcache_page(kaddr)
  *
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index bda0ec31a4e..e1bd9759617 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -13,6 +13,7 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/assembler.h>
+#include <asm/unwind.h>
 
 #include "proc-macros.S"
 
@@ -153,13 +154,16 @@ ENTRY(v7_coherent_kern_range)
  *	- the Icache does not read data from the write buffer
  */
 ENTRY(v7_coherent_user_range)
+ UNWIND(.fnstart		)
 	dcache_line_size r2, r3
 	sub	r3, r2, #1
 	bic	r0, r0, r3
-1:	mcr	p15, 0, r0, c7, c11, 1		@ clean D line to the point of unification
+1:
+ USER(	mcr	p15, 0, r0, c7, c11, 1	)	@ clean D line to the point of unification
 	dsb
-	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I line
+ USER(	mcr	p15, 0, r0, c7, c5, 1	)	@ invalidate I line
 	add	r0, r0, r2
+2:
 	cmp	r0, r1
 	blo	1b
 	mov	r0, #0
@@ -167,6 +171,17 @@ ENTRY(v7_coherent_user_range)
 	dsb
 	isb
 	mov	pc, lr
+
+/*
+ * Fault handling for the cache operation above. If the virtual address in r0
+ * isn't mapped, just try the next page.
+ */
+9001:
+	mov	r0, r0, lsr #12
+	mov	r0, r0, lsl #12
+	add	r0, r0, #4096
+	b	2b
+ UNWIND(.fnend		)
 ENDPROC(v7_coherent_kern_range)
 ENDPROC(v7_coherent_user_range)
 
-- 
cgit v1.2.3


From 3257f43d9296ed7adcc84e48f6ddf5313cf29266 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Tue, 6 Oct 2009 17:57:22 +0100
Subject: ARM: 5747/1: Fix the start_pg value in free_memmap()

If sparsemem is enabled, the start_pfn passed to the free_memmap()
function corresponds to an area of memory not known to the kernel and
pfn_to_page returns a wrong value. The (start_pfn - 1), however, is
known to the kernel.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 877c492f8e1..40940d7ce4f 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -483,7 +483,7 @@ free_memmap(int node, unsigned long start_pfn, unsigned long end_pfn)
 	/*
 	 * Convert start_pfn/end_pfn to a struct page pointer.
 	 */
-	start_pg = pfn_to_page(start_pfn);
+	start_pg = pfn_to_page(start_pfn - 1) + 1;
 	end_pg = pfn_to_page(end_pfn);
 
 	/*
-- 
cgit v1.2.3


From b623438341b40ee78bdab7ab509889de519af2e7 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Tue, 6 Oct 2009 19:30:40 +0100
Subject: ARM: 5748/1: bcmring: fix build warning messages

Fix the warning messages during kernel build for bcmring.

Signed-off-by: Leo Hao Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/core.c                | 4 ++--
 arch/arm/mach-bcmring/include/mach/system.h | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
index 4b4f69251b3..e590bbe0a7b 100644
--- a/arch/arm/mach-bcmring/core.c
+++ b/arch/arm/mach-bcmring/core.c
@@ -271,12 +271,12 @@ static struct irqaction bcmring_timer_irq = {
 	.handler = bcmring_timer_interrupt,
 };
 
-static cycle_t bcmring_get_cycles_timer1(void)
+static cycle_t bcmring_get_cycles_timer1(struct clocksource *cs)
 {
 	return ~readl(TIMER1_VA_BASE + TIMER_VALUE);
 }
 
-static cycle_t bcmring_get_cycles_timer3(void)
+static cycle_t bcmring_get_cycles_timer3(struct clocksource *cs)
 {
 	return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
 }
diff --git a/arch/arm/mach-bcmring/include/mach/system.h b/arch/arm/mach-bcmring/include/mach/system.h
index cdbf93c694a..38b37060d42 100644
--- a/arch/arm/mach-bcmring/include/mach/system.h
+++ b/arch/arm/mach-bcmring/include/mach/system.h
@@ -29,7 +29,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode, char *cmd)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot);
 
-- 
cgit v1.2.3


From 4918a01393a38db4346ae88f38c1fd8324bb5e63 Mon Sep 17 00:00:00 2001
From: Dmitry Artamonow <mad_soft@inbox.ru>
Date: Wed, 7 Oct 2009 10:48:26 +0100
Subject: ARM: 5752/1: SA1100: fix building of h3100

Both iPaqs h3100 and h3600 currently share the same source
file - h3600.c  But Makefile builds it only if CONFIG_SA1100_H3600
selected, so selecting just CONFIG_SA1100_H3100 results in
"no machine record defined" message and aborted compilation.

Fix it.

Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-sa1100/Makefile | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index 8a5546e6d54..bb7b8198d0c 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -25,6 +25,7 @@ led-$(CONFIG_SA1100_CERF)		+= leds-cerf.o
 
 obj-$(CONFIG_SA1100_COLLIE)		+= collie.o
 
+obj-$(CONFIG_SA1100_H3100)		+= h3600.o
 obj-$(CONFIG_SA1100_H3600)		+= h3600.o
 
 obj-$(CONFIG_SA1100_HACKKIT)		+= hackkit.o
-- 
cgit v1.2.3


From 941500954470e04679ff6e3cff0f82d8dbd2b6c3 Mon Sep 17 00:00:00 2001
From: Hubert Feurstein <hubert.feurstein@contec.at>
Date: Wed, 7 Oct 2009 08:36:07 +0100
Subject: ARM: 5749/1: ep93xx/micro9: Update maintainer

Update Contec Micro9 maintainer and add entry in MAINTAINERS

Cc: Ryan Mallon <ryan@bluewatersys.com>

Requires: 5744/1
Signed-off-by: Hubert Feurstein <hubert.feurstein@contec.at>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Manfred Gruber <m.gruber@tirol.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/micro9.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index 0a313e82fb7..72e7a7dfd7b 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -2,7 +2,9 @@
  *  linux/arch/arm/mach-ep93xx/micro9.c
  *
  * Copyright (C) 2006 Contec Steuerungstechnik & Automation GmbH
- *                   Manfred Gruber <manfred.gruber@contec.at>
+ *                    Manfred Gruber <m.gruber@tirol.com>
+ * Copyright (C) 2009 Contec Steuerungstechnik & Automation GmbH
+ *                    Hubert Feurstein <hubert.feurstein@contec.at>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -66,7 +68,7 @@ static void __init micro9h_init_machine(void)
 }
 
 MACHINE_START(MICRO9, "Contec Hypercontrol Micro9-H")
-	/* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
 	.phys_io	= EP93XX_APB_PHYS_BASE,
 	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
@@ -88,7 +90,7 @@ static void __init micro9m_init_machine(void)
 }
 
 MACHINE_START(MICRO9M, "Contec Hypercontrol Micro9-M")
-	/* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
 	.phys_io	= EP93XX_APB_PHYS_BASE,
 	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
@@ -110,7 +112,7 @@ static void __init micro9l_init_machine(void)
 }
 
 MACHINE_START(MICRO9L, "Contec Hypercontrol Micro9-L")
-	/* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
 	.phys_io	= EP93XX_APB_PHYS_BASE,
 	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
-- 
cgit v1.2.3


From 14636005fff800d4131dfe89927207a564efcc17 Mon Sep 17 00:00:00 2001
From: Hubert Feurstein <hubert.feurstein@contec.at>
Date: Wed, 7 Oct 2009 08:39:09 +0100
Subject: ARM: 5750/1: ep93xx/micro9: Update platform code

Update Contec Micro9 platform code

Cc: Ryan Mallon <ryan@bluewatersys.com>

Requires: 5749/1
Signed-off-by: Hubert Feurstein <hubert.feurstein@contec.at>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/Kconfig                    |  14 +--
 arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h |  11 +++
 arch/arm/mach-ep93xx/micro9.c                   | 108 +++++++++++++-----------
 3 files changed, 75 insertions(+), 58 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index 6675c051f62..4ad0380ff80 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -130,28 +130,28 @@ config MACH_MICRO9
 	bool
 
 config MACH_MICRO9H
-	bool "Support Contec Hypercontrol Micro9-H"
+	bool "Support Contec Micro9-High"
 	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	select MACH_MICRO9
 	help
 	  Say 'Y' here if you want your kernel to support the
-	  Contec Hypercontrol Micro9-H board.
+	  Contec Micro9-High board.
 
 config MACH_MICRO9M
-	bool "Support Contec Hypercontrol Micro9-M"
-	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	bool "Support Contec Micro9-Mid"
+	depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
 	select MACH_MICRO9
 	help
 	  Say 'Y' here if you want your kernel to support the
-	  Contec Hypercontrol Micro9-M board.
+	  Contec Micro9-Mid board.
 
 config MACH_MICRO9L
-	bool "Support Contec Hypercontrol Micro9-L"
+	bool "Support Contec Micro9-Lite"
 	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	select MACH_MICRO9
 	help
 	  Say 'Y' here if you want your kernel to support the
-	  Contec Hypercontrol Micro9-L board.
+	  Contec Micro9-Lite board.
 
 config MACH_TS72XX
 	bool "Support Technologic Systems TS-72xx SBC"
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index 0fbf87b1633..587756dbd6f 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -218,6 +218,17 @@
 #define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV	(1<<16)
 #define EP93XX_SYSCON_KEYTCHCLKDIV_KEN	(1<<15)
 #define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV	(1<<0)
+#define EP93XX_SYSCON_SYSCFG		EP93XX_SYSCON_REG(0x9c)
+#define EP93XX_SYSCON_SYSCFG_REV_MASK	(0xf0000000)
+#define EP93XX_SYSCON_SYSCFG_REV_SHIFT	(28)
+#define EP93XX_SYSCON_SYSCFG_SBOOT	(1<<8)
+#define EP93XX_SYSCON_SYSCFG_LCSN7	(1<<7)
+#define EP93XX_SYSCON_SYSCFG_LCSN6	(1<<6)
+#define EP93XX_SYSCON_SYSCFG_LASDO	(1<<5)
+#define EP93XX_SYSCON_SYSCFG_LEEDA	(1<<4)
+#define EP93XX_SYSCON_SYSCFG_LEECLK	(1<<3)
+#define EP93XX_SYSCON_SYSCFG_LCSN2	(1<<1)
+#define EP93XX_SYSCON_SYSCFG_LCSN1	(1<<0)
 #define EP93XX_SYSCON_SWLOCK		EP93XX_SYSCON_REG(0xc0)
 
 #define EP93XX_WATCHDOG_BASE		EP93XX_APB_IOMEM(0x00140000)
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index 72e7a7dfd7b..49fbee5adde 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -22,52 +22,77 @@
 #include <asm/mach/arch.h>
 
 
-static struct ep93xx_eth_data micro9_eth_data = {
-	.phy_id		= 0x1f,
-};
-
-static void __init micro9_init(void)
-{
-	ep93xx_register_eth(&micro9_eth_data, 1);
-}
-
-/*
- * Micro9-H
- */
-#ifdef CONFIG_MACH_MICRO9H
-static struct physmap_flash_data micro9h_flash_data = {
-	.width		= 4,
-};
+/*************************************************************************
+ * Micro9 NOR Flash
+ *
+ * Micro9-High has up to 64MB of 32-bit flash on CS1
+ * Micro9-Mid has up to 64MB of either 32-bit or 16-bit flash on CS1
+ * Micro9-Lite uses a seperate MTD map driver for flash support
+ *************************************************************************/
+static struct physmap_flash_data micro9_flash_data;
 
-static struct resource micro9h_flash_resource = {
+static struct resource micro9_flash_resource = {
 	.start		= EP93XX_CS1_PHYS_BASE,
 	.end		= EP93XX_CS1_PHYS_BASE + SZ_64M - 1,
 	.flags		= IORESOURCE_MEM,
 };
 
-static struct platform_device micro9h_flash = {
+static struct platform_device micro9_flash = {
 	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
-		.platform_data	= &micro9h_flash_data,
+		.platform_data	= &micro9_flash_data,
 	},
 	.num_resources	= 1,
-	.resource	= &micro9h_flash_resource,
+	.resource	= &micro9_flash_resource,
 };
 
-static void __init micro9h_init(void)
+static void __init __micro9_register_flash(unsigned int width)
+{
+	micro9_flash_data.width = width;
+
+	platform_device_register(&micro9_flash);
+}
+
+static unsigned int __init micro9_detect_bootwidth(void)
 {
-	platform_device_register(&micro9h_flash);
+	u32 v;
+
+	/* Detect the bus width of the external flash memory */
+	v = __raw_readl(EP93XX_SYSCON_SYSCFG);
+	if (v & EP93XX_SYSCON_SYSCFG_LCSN7)
+		return 4; /* 32-bit */
+	else
+		return 2; /* 16-bit */
 }
 
-static void __init micro9h_init_machine(void)
+static void __init micro9_register_flash(void)
+{
+	if (machine_is_micro9())
+		__micro9_register_flash(4);
+	else if (machine_is_micro9m())
+		__micro9_register_flash(micro9_detect_bootwidth());
+}
+
+
+/*************************************************************************
+ * Micro9 Ethernet
+ *************************************************************************/
+static struct ep93xx_eth_data micro9_eth_data = {
+	.phy_id		= 0x1f,
+};
+
+
+static void __init micro9_init_machine(void)
 {
 	ep93xx_init_devices();
-	micro9_init();
-	micro9h_init();
+	ep93xx_register_eth(&micro9_eth_data, 1);
+	micro9_register_flash();
 }
 
-MACHINE_START(MICRO9, "Contec Hypercontrol Micro9-H")
+
+#ifdef CONFIG_MACH_MICRO9H
+MACHINE_START(MICRO9, "Contec Micro9-High")
 	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
 	.phys_io	= EP93XX_APB_PHYS_BASE,
 	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
@@ -75,43 +100,25 @@ MACHINE_START(MICRO9, "Contec Hypercontrol Micro9-H")
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
-	.init_machine	= micro9h_init_machine,
+	.init_machine	= micro9_init_machine,
 MACHINE_END
 #endif
 
-/*
- * Micro9-M
- */
 #ifdef CONFIG_MACH_MICRO9M
-static void __init micro9m_init_machine(void)
-{
-	ep93xx_init_devices();
-	micro9_init();
-}
-
-MACHINE_START(MICRO9M, "Contec Hypercontrol Micro9-M")
+MACHINE_START(MICRO9M, "Contec Micro9-Mid")
 	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
 	.phys_io	= EP93XX_APB_PHYS_BASE,
 	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
-	.init_machine	= micro9m_init_machine,
+	.init_machine	= micro9_init_machine,
 MACHINE_END
 #endif
 
-/*
- * Micro9-L
- */
 #ifdef CONFIG_MACH_MICRO9L
-static void __init micro9l_init_machine(void)
-{
-	ep93xx_init_devices();
-	micro9_init();
-}
-
-MACHINE_START(MICRO9L, "Contec Hypercontrol Micro9-L")
+MACHINE_START(MICRO9L, "Contec Micro9-Lite")
 	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
 	.phys_io	= EP93XX_APB_PHYS_BASE,
 	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
@@ -119,7 +126,6 @@ MACHINE_START(MICRO9L, "Contec Hypercontrol Micro9-L")
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
-	.init_machine	= micro9l_init_machine,
+	.init_machine	= micro9_init_machine,
 MACHINE_END
 #endif
-
-- 
cgit v1.2.3


From 7232344d49b88e8787f1842936867cd224da47e5 Mon Sep 17 00:00:00 2001
From: Hubert Feurstein <hubert.feurstein@contec.at>
Date: Wed, 7 Oct 2009 08:41:01 +0100
Subject: ARM: 5751/1: ep93xx/micro9: Add Micro9-Slim

Add Contec Micro9-Slim support

Cc: Ryan Mallon <ryan@bluewatersys.com>

Requires: 5750/1
Signed-off-by: Hubert Feurstein <hubert.feurstein@contec.at>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/Kconfig  |  8 ++++++++
 arch/arm/mach-ep93xx/micro9.c | 16 +++++++++++++++-
 2 files changed, 23 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index 4ad0380ff80..9167c3d2a5e 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -153,6 +153,14 @@ config MACH_MICRO9L
 	  Say 'Y' here if you want your kernel to support the
 	  Contec Micro9-Lite board.
 
+config MACH_MICRO9S
+	bool "Support Contec Micro9-Slim"
+	depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
+	select MACH_MICRO9
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Contec Micro9-Slim board.
+
 config MACH_TS72XX
 	bool "Support Technologic Systems TS-72xx SBC"
 	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index 49fbee5adde..d83b80478b0 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -28,6 +28,7 @@
  * Micro9-High has up to 64MB of 32-bit flash on CS1
  * Micro9-Mid has up to 64MB of either 32-bit or 16-bit flash on CS1
  * Micro9-Lite uses a seperate MTD map driver for flash support
+ * Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1
  *************************************************************************/
 static struct physmap_flash_data micro9_flash_data;
 
@@ -70,7 +71,7 @@ static void __init micro9_register_flash(void)
 {
 	if (machine_is_micro9())
 		__micro9_register_flash(4);
-	else if (machine_is_micro9m())
+	else if (machine_is_micro9m() || machine_is_micro9s())
 		__micro9_register_flash(micro9_detect_bootwidth());
 }
 
@@ -129,3 +130,16 @@ MACHINE_START(MICRO9L, "Contec Micro9-Lite")
 	.init_machine	= micro9_init_machine,
 MACHINE_END
 #endif
+
+#ifdef CONFIG_MACH_MICRO9S
+MACHINE_START(MICRO9S, "Contec Micro9-Slim")
+	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= micro9_init_machine,
+MACHINE_END
+#endif
-- 
cgit v1.2.3


From 591006f830bcc8edf2841750d7543c5c5a672f89 Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Fri, 25 Sep 2009 17:54:31 +0100
Subject: ARM: 5729/1: ep93xx: define EP93XX_*_PHYS_BASE with macros

Change the #define's for the EP93XX_*_PHYS_BASE addresses to use
macros for easier readability.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index 587756dbd6f..b07338c0a01 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -52,25 +52,27 @@
 #define EP93XX_AHB_VIRT_BASE		0xfef00000
 #define EP93XX_AHB_SIZE			0x00100000
 
+#define EP93XX_AHB_PHYS(x)		(EP93XX_AHB_PHYS_BASE + (x))
 #define EP93XX_AHB_IOMEM(x)		IOMEM(EP93XX_AHB_VIRT_BASE + (x))
 
 #define EP93XX_APB_PHYS_BASE		0x80800000
 #define EP93XX_APB_VIRT_BASE		0xfed00000
 #define EP93XX_APB_SIZE			0x00200000
 
+#define EP93XX_APB_PHYS(x)		(EP93XX_APB_PHYS_BASE + (x))
 #define EP93XX_APB_IOMEM(x)		IOMEM(EP93XX_APB_VIRT_BASE + (x))
 
 
 /* AHB peripherals */
 #define EP93XX_DMA_BASE			EP93XX_AHB_IOMEM(0x00000000)
 
-#define EP93XX_ETHERNET_PHYS_BASE	(EP93XX_AHB_PHYS_BASE + 0x00010000)
+#define EP93XX_ETHERNET_PHYS_BASE	EP93XX_AHB_PHYS(0x00010000)
 #define EP93XX_ETHERNET_BASE		EP93XX_AHB_IOMEM(0x00010000)
 
-#define EP93XX_USB_PHYS_BASE		(EP93XX_AHB_PHYS_BASE + 0x00020000)
+#define EP93XX_USB_PHYS_BASE		EP93XX_AHB_PHYS(0x00020000)
 #define EP93XX_USB_BASE			EP93XX_AHB_IOMEM(0x00020000)
 
-#define EP93XX_RASTER_PHYS_BASE		(EP93XX_AHB_PHYS_BASE + 0x00030000)
+#define EP93XX_RASTER_PHYS_BASE		EP93XX_AHB_PHYS(0x00030000)
 #define EP93XX_RASTER_BASE		EP93XX_AHB_IOMEM(0x00030000)
 
 #define EP93XX_GRAPHICS_ACCEL_BASE	EP93XX_AHB_IOMEM(0x00040000)
@@ -134,13 +136,13 @@
 
 #define EP93XX_IRDA_BASE		EP93XX_APB_IOMEM(0x000b0000)
 
-#define EP93XX_UART1_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000c0000)
+#define EP93XX_UART1_PHYS_BASE		EP93XX_APB_PHYS(0x000c0000)
 #define EP93XX_UART1_BASE		EP93XX_APB_IOMEM(0x000c0000)
 
-#define EP93XX_UART2_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000d0000)
+#define EP93XX_UART2_PHYS_BASE		EP93XX_APB_PHYS(0x000d0000)
 #define EP93XX_UART2_BASE		EP93XX_APB_IOMEM(0x000d0000)
 
-#define EP93XX_UART3_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000e0000)
+#define EP93XX_UART3_PHYS_BASE		EP93XX_APB_PHYS(0x000e0000)
 #define EP93XX_UART3_BASE		EP93XX_APB_IOMEM(0x000e0000)
 
 #define EP93XX_KEY_MATRIX_BASE		EP93XX_APB_IOMEM(0x000f0000)
@@ -148,10 +150,10 @@
 #define EP93XX_ADC_BASE			EP93XX_APB_IOMEM(0x00100000)
 #define EP93XX_TOUCHSCREEN_BASE		EP93XX_APB_IOMEM(0x00100000)
 
-#define EP93XX_PWM_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x00110000)
+#define EP93XX_PWM_PHYS_BASE		EP93XX_APB_PHYS(0x00110000)
 #define EP93XX_PWM_BASE			EP93XX_APB_IOMEM(0x00110000)
 
-#define EP93XX_RTC_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x00120000)
+#define EP93XX_RTC_PHYS_BASE		EP93XX_APB_PHYS(0x00120000)
 #define EP93XX_RTC_BASE			EP93XX_APB_IOMEM(0x00120000)
 
 #define EP93XX_SYSCON_BASE		EP93XX_APB_IOMEM(0x00130000)
-- 
cgit v1.2.3


From 03d38418a5a3361a757336cd87d64b35c1c7d658 Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Wed, 7 Oct 2009 23:43:26 +0100
Subject: ARM: 5753/1: ep93xx: remove old EP93XX_GPIO_* defines

Most of the EP93XX_GPIO_*_INT_* register defines in ep93xx-regs.h
not required due to how the ep93xx core and gpiolib support handle
gpio interrupts.  Remove the defines to prevent future confusion.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h | 12 ------------
 1 file changed, 12 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index b07338c0a01..aae72b8ab23 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -114,20 +114,8 @@
 
 #define EP93XX_GPIO_BASE		EP93XX_APB_IOMEM(0x00040000)
 #define EP93XX_GPIO_REG(x)		(EP93XX_GPIO_BASE + (x))
-#define EP93XX_GPIO_F_INT_TYPE1		EP93XX_GPIO_REG(0x4c)
-#define EP93XX_GPIO_F_INT_TYPE2		EP93XX_GPIO_REG(0x50)
-#define EP93XX_GPIO_F_INT_ACK		EP93XX_GPIO_REG(0x54)
-#define EP93XX_GPIO_F_INT_ENABLE	EP93XX_GPIO_REG(0x58)
 #define EP93XX_GPIO_F_INT_STATUS	EP93XX_GPIO_REG(0x5c)
-#define EP93XX_GPIO_A_INT_TYPE1		EP93XX_GPIO_REG(0x90)
-#define EP93XX_GPIO_A_INT_TYPE2		EP93XX_GPIO_REG(0x94)
-#define EP93XX_GPIO_A_INT_ACK		EP93XX_GPIO_REG(0x98)
-#define EP93XX_GPIO_A_INT_ENABLE	EP93XX_GPIO_REG(0x9c)
 #define EP93XX_GPIO_A_INT_STATUS	EP93XX_GPIO_REG(0xa0)
-#define EP93XX_GPIO_B_INT_TYPE1		EP93XX_GPIO_REG(0xac)
-#define EP93XX_GPIO_B_INT_TYPE2		EP93XX_GPIO_REG(0xb0)
-#define EP93XX_GPIO_B_INT_ACK		EP93XX_GPIO_REG(0xb4)
-#define EP93XX_GPIO_B_INT_ENABLE	EP93XX_GPIO_REG(0xb8)
 #define EP93XX_GPIO_B_INT_STATUS	EP93XX_GPIO_REG(0xbc)
 
 #define EP93XX_AAC_BASE			EP93XX_APB_IOMEM(0x00080000)
-- 
cgit v1.2.3


From 6531a991f95f2f34fc00cf0a030b1cdd5e19dc02 Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Thu, 8 Oct 2009 00:45:00 +0100
Subject: ARM: 5754/1: ep93xx: update i2c support

Update the ep93xx i2c support:

  1) The platform init code passes the configuration data for the
     i2c-gpio driver.  This allows any gpio pin do be used for the
     sda and scl pins.  It also allows the platform to specify the
     udelay and timeout.
  2) Program the gpio configuration register to enable/disable the
     open drain drivers.  Note that this really only works if the
     sda and scl pins are set to EP93XX_GPIO_LINE_EEDAT and
     EP93XX_GPIO_LINE_EECLK.
  3) Update the edb93xx.c platform init to use the new support.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/core.c                     | 31 ++++++++++++++++++-------
 arch/arm/mach-ep93xx/edb93xx.c                  | 31 +++++++++++++++++++------
 arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h |  1 +
 arch/arm/mach-ep93xx/include/mach/platform.h    |  4 +++-
 4 files changed, 51 insertions(+), 16 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index f7ebed942f6..f95dc160c34 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -550,13 +550,11 @@ void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
 	platform_device_register(&ep93xx_eth_device);
 }
 
-static struct i2c_gpio_platform_data ep93xx_i2c_data = {
-	.sda_pin		= EP93XX_GPIO_LINE_EEDAT,
-	.sda_is_open_drain	= 0,
-	.scl_pin		= EP93XX_GPIO_LINE_EECLK,
-	.scl_is_open_drain	= 0,
-	.udelay			= 2,
-};
+
+/*************************************************************************
+ * EP93xx i2c peripheral handling
+ *************************************************************************/
+static struct i2c_gpio_platform_data ep93xx_i2c_data;
 
 static struct platform_device ep93xx_i2c_device = {
 	.name			= "i2c-gpio",
@@ -564,8 +562,25 @@ static struct platform_device ep93xx_i2c_device = {
 	.dev.platform_data	= &ep93xx_i2c_data,
 };
 
-void __init ep93xx_register_i2c(struct i2c_board_info *devices, int num)
+void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
+				struct i2c_board_info *devices, int num)
 {
+	/*
+	 * Set the EEPROM interface pin drive type control.
+	 * Defines the driver type for the EECLK and EEDAT pins as either
+	 * open drain, which will require an external pull-up, or a normal
+	 * CMOS driver.
+	 */
+	if (data->sda_is_open_drain && data->sda_pin != EP93XX_GPIO_LINE_EEDAT)
+		pr_warning("ep93xx: sda != EEDAT, open drain has no effect\n");
+	if (data->scl_is_open_drain && data->scl_pin != EP93XX_GPIO_LINE_EECLK)
+		pr_warning("ep93xx: scl != EECLK, open drain has no effect\n");
+
+	__raw_writel((data->sda_is_open_drain << 1) |
+		     (data->scl_is_open_drain << 0),
+		     EP93XX_GPIO_EEDRIVE);
+
+	ep93xx_i2c_data = *data;
 	i2c_register_board_info(0, devices, num);
 	platform_device_register(&ep93xx_i2c_device);
 }
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index 73145ae5d3f..ca71cf1a72a 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -27,8 +27,10 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/i2c.h>
 #include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
 
 #include <mach/hardware.h>
 
@@ -76,13 +78,26 @@ static struct ep93xx_eth_data edb93xx_eth_data = {
 	.phy_id		= 1,
 };
 
-static struct i2c_board_info __initdata edb93xxa_i2c_data[] = {
+
+/*************************************************************************
+ * EDB93xx i2c peripheral handling
+ *************************************************************************/
+static struct i2c_gpio_platform_data edb93xx_i2c_gpio_data = {
+	.sda_pin		= EP93XX_GPIO_LINE_EEDAT,
+	.sda_is_open_drain	= 0,
+	.scl_pin		= EP93XX_GPIO_LINE_EECLK,
+	.scl_is_open_drain	= 0,
+	.udelay			= 0,	/* default to 100 kHz */
+	.timeout		= 0,	/* default to 100 ms */
+};
+
+static struct i2c_board_info __initdata edb93xxa_i2c_board_info[] = {
 	{
 		I2C_BOARD_INFO("isl1208", 0x6f),
 	},
 };
 
-static struct i2c_board_info __initdata edb93xx_i2c_data[] = {
+static struct i2c_board_info __initdata edb93xx_i2c_board_info[] = {
 	{
 		I2C_BOARD_INFO("ds1337", 0x68),
 	},
@@ -92,12 +107,14 @@ static void __init edb93xx_register_i2c(void)
 {
 	if (machine_is_edb9302a() || machine_is_edb9307a() ||
 	    machine_is_edb9315a()) {
-		ep93xx_register_i2c(edb93xxa_i2c_data,
-				ARRAY_SIZE(edb93xxa_i2c_data));
+		ep93xx_register_i2c(&edb93xx_i2c_gpio_data,
+				    edb93xxa_i2c_board_info,
+				    ARRAY_SIZE(edb93xxa_i2c_board_info));
 	} else if (machine_is_edb9307() || machine_is_edb9312() ||
 		   machine_is_edb9315()) {
-		ep93xx_register_i2c(edb93xx_i2c_data,
-				ARRAY_SIZE(edb93xx_i2c_data));
+		ep93xx_register_i2c(&edb93xx_i2c_gpio_data
+				    edb93xx_i2c_board_info,
+				    ARRAY_SIZE(edb93xx_i2c_board_info));
 	}
 }
 
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index aae72b8ab23..b1f937eda29 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -117,6 +117,7 @@
 #define EP93XX_GPIO_F_INT_STATUS	EP93XX_GPIO_REG(0x5c)
 #define EP93XX_GPIO_A_INT_STATUS	EP93XX_GPIO_REG(0xa0)
 #define EP93XX_GPIO_B_INT_STATUS	EP93XX_GPIO_REG(0xbc)
+#define EP93XX_GPIO_EEDRIVE		EP93XX_GPIO_REG(0xc8)
 
 #define EP93XX_AAC_BASE			EP93XX_APB_IOMEM(0x00080000)
 
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 01a0f0838e5..a3ec33fd79d 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -4,6 +4,7 @@
 
 #ifndef __ASSEMBLY__
 
+struct i2c_gpio_platform_data;
 struct i2c_board_info;
 struct platform_device;
 struct ep93xxfb_mach_info;
@@ -33,7 +34,8 @@ static inline void ep93xx_devcfg_clear_bits(unsigned int bits)
 }
 
 void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
-void ep93xx_register_i2c(struct i2c_board_info *devices, int num);
+void ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
+			 struct i2c_board_info *devices, int num);
 void ep93xx_register_fb(struct ep93xxfb_mach_info *data);
 void ep93xx_register_pwm(int pwm0, int pwm1);
 int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);
-- 
cgit v1.2.3


From ebd00c08e28a0ab4dcb715d222214625fff6d62a Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Thu, 8 Oct 2009 23:44:41 +0100
Subject: ARM: 5756/1: ep93xx: introduce clk parent

The clock generation system in the ep93xx uses two external oscillator's
and two internal PLLs to derive all the internal clocks.  Many of these
internal clocks can be stopped to save power.

This introduces a "parent" hierarchy for the clocks so that the users
count can be correctly tracked for power management.

The "parent" for the video clock can either be one of the PLL outputs
or the external oscillator.  In order to correctly track the "parent"
for the video clock calc_clk_div() needed to be modified.  It now
returns an error code if the desired rate cannot be generated.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/clock.c | 166 +++++++++++++++++++++++++++++++------------
 1 file changed, 119 insertions(+), 47 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index dda19cd7619..1d0f9d8aff2 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -16,13 +16,16 @@
 #include <linux/module.h>
 #include <linux/string.h>
 #include <linux/io.h>
+#include <linux/spinlock.h>
+
+#include <mach/hardware.h>
 
 #include <asm/clkdev.h>
 #include <asm/div64.h>
-#include <mach/hardware.h>
 
 
 struct clk {
+	struct clk	*parent;
 	unsigned long	rate;
 	int		users;
 	int		sw_locked;
@@ -39,40 +42,60 @@ static unsigned long get_uart_rate(struct clk *clk);
 static int set_keytchclk_rate(struct clk *clk, unsigned long rate);
 static int set_div_rate(struct clk *clk, unsigned long rate);
 
+
+static struct clk clk_xtali = {
+	.rate		= EP93XX_EXT_CLK_RATE,
+};
 static struct clk clk_uart1 = {
+	.parent		= &clk_xtali,
 	.sw_locked	= 1,
 	.enable_reg	= EP93XX_SYSCON_DEVCFG,
 	.enable_mask	= EP93XX_SYSCON_DEVCFG_U1EN,
 	.get_rate	= get_uart_rate,
 };
 static struct clk clk_uart2 = {
+	.parent		= &clk_xtali,
 	.sw_locked	= 1,
 	.enable_reg	= EP93XX_SYSCON_DEVCFG,
 	.enable_mask	= EP93XX_SYSCON_DEVCFG_U2EN,
 	.get_rate	= get_uart_rate,
 };
 static struct clk clk_uart3 = {
+	.parent		= &clk_xtali,
 	.sw_locked	= 1,
 	.enable_reg	= EP93XX_SYSCON_DEVCFG,
 	.enable_mask	= EP93XX_SYSCON_DEVCFG_U3EN,
 	.get_rate	= get_uart_rate,
 };
-static struct clk clk_pll1;
-static struct clk clk_f;
-static struct clk clk_h;
-static struct clk clk_p;
-static struct clk clk_pll2;
+static struct clk clk_pll1 = {
+	.parent		= &clk_xtali,
+};
+static struct clk clk_f = {
+	.parent		= &clk_pll1,
+};
+static struct clk clk_h = {
+	.parent		= &clk_pll1,
+};
+static struct clk clk_p = {
+	.parent		= &clk_pll1,
+};
+static struct clk clk_pll2 = {
+	.parent		= &clk_xtali,
+};
 static struct clk clk_usb_host = {
+	.parent		= &clk_pll2,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_USH_EN,
 };
 static struct clk clk_keypad = {
+	.parent		= &clk_xtali,
 	.sw_locked	= 1,
 	.enable_reg	= EP93XX_SYSCON_KEYTCHCLKDIV,
 	.enable_mask	= EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
 	.set_rate	= set_keytchclk_rate,
 };
 static struct clk clk_pwm = {
+	.parent		= &clk_xtali,
 	.rate		= EP93XX_EXT_CLK_RATE,
 };
 
@@ -85,50 +108,62 @@ static struct clk clk_video = {
 
 /* DMA Clocks */
 static struct clk clk_m2p0 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P0,
 };
 static struct clk clk_m2p1 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P1,
 };
 static struct clk clk_m2p2 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P2,
 };
 static struct clk clk_m2p3 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P3,
 };
 static struct clk clk_m2p4 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P4,
 };
 static struct clk clk_m2p5 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P5,
 };
 static struct clk clk_m2p6 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P6,
 };
 static struct clk clk_m2p7 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P7,
 };
 static struct clk clk_m2p8 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P8,
 };
 static struct clk clk_m2p9 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P9,
 };
 static struct clk clk_m2m0 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2M0,
 };
 static struct clk clk_m2m1 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2M1,
 };
@@ -137,6 +172,7 @@ static struct clk clk_m2m1 = {
 	{ .dev_id = dev, .con_id = con, .clk = ck }
 
 static struct clk_lookup clocks[] = {
+	INIT_CK(NULL,			"xtali",	&clk_xtali),
 	INIT_CK("apb:uart1",		NULL,		&clk_uart1),
 	INIT_CK("apb:uart2",		NULL,		&clk_uart2),
 	INIT_CK("apb:uart3",		NULL,		&clk_uart3),
@@ -163,48 +199,84 @@ static struct clk_lookup clocks[] = {
 	INIT_CK(NULL,			"m2m1",		&clk_m2m1),
 };
 
+static DEFINE_SPINLOCK(clk_lock);
+
+static void __clk_enable(struct clk *clk)
+{
+	if (!clk->users++) {
+		if (clk->parent)
+			__clk_enable(clk->parent);
+
+		if (clk->enable_reg) {
+			u32 v;
+
+			v = __raw_readl(clk->enable_reg);
+			v |= clk->enable_mask;
+			if (clk->sw_locked)
+				ep93xx_syscon_swlocked_write(v, clk->enable_reg);
+			else
+				__raw_writel(v, clk->enable_reg);
+		}
+	}
+}
 
 int clk_enable(struct clk *clk)
 {
-	if (!clk->users++ && clk->enable_reg) {
-		u32 value;
+	unsigned long flags;
 
-		value = __raw_readl(clk->enable_reg);
-		value |= clk->enable_mask;
-		if (clk->sw_locked)
-			ep93xx_syscon_swlocked_write(value, clk->enable_reg);
-		else
-			__raw_writel(value, clk->enable_reg);
-	}
+	if (!clk)
+		return -EINVAL;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	__clk_enable(clk);
+	spin_unlock_irqrestore(&clk_lock, flags);
 
 	return 0;
 }
 EXPORT_SYMBOL(clk_enable);
 
-void clk_disable(struct clk *clk)
+static void __clk_disable(struct clk *clk)
 {
-	if (!--clk->users && clk->enable_reg) {
-		u32 value;
+	if (!--clk->users) {
+		if (clk->enable_reg) {
+			u32 v;
+
+			v = __raw_readl(clk->enable_reg);
+			v &= ~clk->enable_mask;
+			if (clk->sw_locked)
+				ep93xx_syscon_swlocked_write(v, clk->enable_reg);
+			else
+				__raw_writel(v, clk->enable_reg);
+		}
 
-		value = __raw_readl(clk->enable_reg);
-		value &= ~clk->enable_mask;
-		if (clk->sw_locked)
-			ep93xx_syscon_swlocked_write(value, clk->enable_reg);
-		else
-			__raw_writel(value, clk->enable_reg);
+		if (clk->parent)
+			__clk_disable(clk->parent);
 	}
 }
+
+void clk_disable(struct clk *clk)
+{
+	unsigned long flags;
+
+	if (!clk)
+		return;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	__clk_disable(clk);
+	spin_unlock_irqrestore(&clk_lock, flags);
+}
 EXPORT_SYMBOL(clk_disable);
 
 static unsigned long get_uart_rate(struct clk *clk)
 {
+	unsigned long rate = clk_get_rate(clk->parent);
 	u32 value;
 
 	value = __raw_readl(EP93XX_SYSCON_PWRCNT);
 	if (value & EP93XX_SYSCON_PWRCNT_UARTBAUD)
-		return EP93XX_EXT_CLK_RATE;
+		return rate;
 	else
-		return EP93XX_EXT_CLK_RATE / 2;
+		return rate / 2;
 }
 
 unsigned long clk_get_rate(struct clk *clk)
@@ -244,16 +316,16 @@ static int set_keytchclk_rate(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
-static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
-				  int *pdiv, int *div)
+static int calc_clk_div(struct clk *clk, unsigned long rate,
+			int *psel, int *esel, int *pdiv, int *div)
 {
-	unsigned long max_rate, best_rate = 0,
-		actual_rate = 0, mclk_rate = 0, rate_err = -1;
+	struct clk *mclk;
+	unsigned long max_rate, actual_rate, mclk_rate, rate_err = -1;
 	int i, found = 0, __div = 0, __pdiv = 0;
 
 	/* Don't exceed the maximum rate */
 	max_rate = max(max(clk_pll1.rate / 4, clk_pll2.rate / 4),
-		       (unsigned long)EP93XX_EXT_CLK_RATE / 4);
+		       clk_xtali.rate / 4);
 	rate = min(rate, max_rate);
 
 	/*
@@ -267,11 +339,12 @@ static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
 	 */
 	for (i = 0; i < 3; i++) {
 		if (i == 0)
-			mclk_rate = EP93XX_EXT_CLK_RATE * 2;
+			mclk = &clk_xtali;
 		else if (i == 1)
-			mclk_rate = clk_pll1.rate * 2;
-		else if (i == 2)
-			mclk_rate = clk_pll2.rate * 2;
+			mclk = &clk_pll1;
+		else
+			mclk = &clk_pll2;
+		mclk_rate = mclk->rate * 2;
 
 		/* Try each predivider value */
 		for (__pdiv = 4; __pdiv <= 6; __pdiv++) {
@@ -286,7 +359,8 @@ static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
 				*div = __div;
 				*psel = (i == 2);
 				*esel = (i != 0);
-				best_rate = actual_rate;
+				clk->parent = mclk;
+				clk->rate = actual_rate;
 				rate_err = abs(actual_rate - rate);
 				found = 1;
 			}
@@ -294,21 +368,19 @@ static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
 	}
 
 	if (!found)
-		return 0;
+		return -EINVAL;
 
-	return best_rate;
+	return 0;
 }
 
 static int set_div_rate(struct clk *clk, unsigned long rate)
 {
-	unsigned long actual_rate;
-	int psel = 0, esel = 0, pdiv = 0, div = 0;
+	int err, psel = 0, esel = 0, pdiv = 0, div = 0;
 	u32 val;
 
-	actual_rate = calc_clk_div(rate, &psel, &esel, &pdiv, &div);
-	if (actual_rate == 0)
-		return -EINVAL;
-	clk->rate = actual_rate;
+	err = calc_clk_div(clk, rate, &psel, &esel, &pdiv, &div);
+	if (err)
+		return err;
 
 	/* Clear the esel, psel, pdiv and div bits */
 	val = __raw_readl(clk->enable_reg);
@@ -344,7 +416,7 @@ static unsigned long calc_pll_rate(u32 config_word)
 	unsigned long long rate;
 	int i;
 
-	rate = EP93XX_EXT_CLK_RATE;
+	rate = clk_xtali.rate;
 	rate *= ((config_word >> 11) & 0x1f) + 1;		/* X1FBD */
 	rate *= ((config_word >> 5) & 0x3f) + 1;		/* X2FBD */
 	do_div(rate, (config_word & 0x1f) + 1);			/* X2IPD */
@@ -377,7 +449,7 @@ static int __init ep93xx_clock_init(void)
 
 	value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1);
 	if (!(value & 0x00800000)) {			/* PLL1 bypassed?  */
-		clk_pll1.rate = EP93XX_EXT_CLK_RATE;
+		clk_pll1.rate = clk_xtali.rate;
 	} else {
 		clk_pll1.rate = calc_pll_rate(value);
 	}
@@ -388,7 +460,7 @@ static int __init ep93xx_clock_init(void)
 
 	value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2);
 	if (!(value & 0x00080000)) {			/* PLL2 bypassed?  */
-		clk_pll2.rate = EP93XX_EXT_CLK_RATE;
+		clk_pll2.rate = clk_xtali.rate;
 	} else if (value & 0x00040000) {		/* PLL2 enabled?  */
 		clk_pll2.rate = calc_pll_rate(value);
 	} else {
-- 
cgit v1.2.3


From d191fe093f4494e0220f11f4ef2068b9581357b5 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun, 11 Oct 2009 15:03:11 +0100
Subject: ARM: Dump memory and backtrace as one printk per line

dump_mem and dump_backtrace were both using multiple printk statements
to print each line.  With DEBUG_LL enabled, this causes OOPS to become
very difficult to read.  Solve this by only using one printk per line.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/traps.c | 42 +++++++++++++++++++++++-------------------
 1 file changed, 23 insertions(+), 19 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 467b69ed102..e768fb59b67 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -50,10 +50,10 @@ static void dump_mem(const char *str, unsigned long bottom, unsigned long top);
 void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame)
 {
 #ifdef CONFIG_KALLSYMS
-	printk("[<%08lx>] ", where);
-	print_symbol("(%s) ", where);
-	printk("from [<%08lx>] ", from);
-	print_symbol("(%s)\n", from);
+	char sym1[KSYM_SYMBOL_LEN], sym2[KSYM_SYMBOL_LEN];
+	sprint_symbol(sym1, where);
+	sprint_symbol(sym2, from);
+	printk("[<%08lx>] (%s) from [<%08lx>] (%s)\n", where, sym1, from, sym2);
 #else
 	printk("Function entered at [<%08lx>] from [<%08lx>]\n", where, from);
 #endif
@@ -83,7 +83,7 @@ static int verify_stack(unsigned long sp)
  */
 static void dump_mem(const char *str, unsigned long bottom, unsigned long top)
 {
-	unsigned long p = bottom & ~31;
+	unsigned long first;
 	mm_segment_t fs;
 	int i;
 
@@ -97,20 +97,23 @@ static void dump_mem(const char *str, unsigned long bottom, unsigned long top)
 
 	printk("%s(0x%08lx to 0x%08lx)\n", str, bottom, top);
 
-	for (p = bottom & ~31; p < top;) {
-		printk("%04lx: ", p & 0xffff);
+	for (first = bottom & ~31; first < top; first += 32) {
+		unsigned long p;
+		char str[sizeof(" 12345678") * 8 + 1];
 
-		for (i = 0; i < 8; i++, p += 4) {
-			unsigned int val;
+		memset(str, ' ', sizeof(str));
+		str[sizeof(str) - 1] = '\0';
 
-			if (p < bottom || p >= top)
-				printk("         ");
-			else {
-				__get_user(val, (unsigned long *)p);
-				printk("%08x ", val);
+		for (p = first, i = 0; i < 8 && p < top; i++, p += 4) {
+			if (p >= bottom && p < top) {
+				unsigned long val;
+				if (__get_user(val, (unsigned long *)p) == 0)
+					sprintf(str + i * 9, " %08lx", val);
+				else
+					sprintf(str + i * 9, " ????????");
 			}
 		}
-		printk ("\n");
+		printk("%04lx:%s\n", first & 0xffff, str);
 	}
 
 	set_fs(fs);
@@ -122,6 +125,7 @@ static void dump_instr(struct pt_regs *regs)
 	const int thumb = thumb_mode(regs);
 	const int width = thumb ? 4 : 8;
 	mm_segment_t fs;
+	char str[sizeof("00000000 ") * 5 + 2 + 1], *p = str;
 	int i;
 
 	/*
@@ -132,7 +136,6 @@ static void dump_instr(struct pt_regs *regs)
 	fs = get_fs();
 	set_fs(KERNEL_DS);
 
-	printk("Code: ");
 	for (i = -4; i < 1; i++) {
 		unsigned int val, bad;
 
@@ -142,13 +145,14 @@ static void dump_instr(struct pt_regs *regs)
 			bad = __get_user(val, &((u32 *)addr)[i]);
 
 		if (!bad)
-			printk(i == 0 ? "(%0*x) " : "%0*x ", width, val);
+			p += sprintf(p, i == 0 ? "(%0*x) " : "%0*x ",
+					width, val);
 		else {
-			printk("bad PC value.");
+			p += sprintf(p, "bad PC value");
 			break;
 		}
 	}
-	printk("\n");
+	printk("Code: %s\n", str);
 
 	set_fs(fs);
 }
-- 
cgit v1.2.3


From e40c2ec6761d11043ad9f6352679049dbee836eb Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun, 11 Oct 2009 15:17:53 +0100
Subject: ARM: Dump code/mem oops lines with the appropriate log level

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/traps.c | 33 +++++++++++++++++----------------
 1 file changed, 17 insertions(+), 16 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index e768fb59b67..b551b650496 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -45,7 +45,7 @@ static int __init user_debug_setup(char *str)
 __setup("user_debug=", user_debug_setup);
 #endif
 
-static void dump_mem(const char *str, unsigned long bottom, unsigned long top);
+static void dump_mem(const char *, const char *, unsigned long, unsigned long);
 
 void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame)
 {
@@ -59,7 +59,7 @@ void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long
 #endif
 
 	if (in_exception_text(where))
-		dump_mem("Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs));
+		dump_mem("", "Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs));
 }
 
 #ifndef CONFIG_ARM_UNWIND
@@ -81,7 +81,8 @@ static int verify_stack(unsigned long sp)
 /*
  * Dump out the contents of some memory nicely...
  */
-static void dump_mem(const char *str, unsigned long bottom, unsigned long top)
+static void dump_mem(const char *lvl, const char *str, unsigned long bottom,
+		     unsigned long top)
 {
 	unsigned long first;
 	mm_segment_t fs;
@@ -95,7 +96,7 @@ static void dump_mem(const char *str, unsigned long bottom, unsigned long top)
 	fs = get_fs();
 	set_fs(KERNEL_DS);
 
-	printk("%s(0x%08lx to 0x%08lx)\n", str, bottom, top);
+	printk("%s%s(0x%08lx to 0x%08lx)\n", lvl, str, bottom, top);
 
 	for (first = bottom & ~31; first < top; first += 32) {
 		unsigned long p;
@@ -113,13 +114,13 @@ static void dump_mem(const char *str, unsigned long bottom, unsigned long top)
 					sprintf(str + i * 9, " ????????");
 			}
 		}
-		printk("%04lx:%s\n", first & 0xffff, str);
+		printk("%s%04lx:%s\n", lvl, first & 0xffff, str);
 	}
 
 	set_fs(fs);
 }
 
-static void dump_instr(struct pt_regs *regs)
+static void dump_instr(const char *lvl, struct pt_regs *regs)
 {
 	unsigned long addr = instruction_pointer(regs);
 	const int thumb = thumb_mode(regs);
@@ -152,7 +153,7 @@ static void dump_instr(struct pt_regs *regs)
 			break;
 		}
 	}
-	printk("Code: %s\n", str);
+	printk("%sCode: %s\n", lvl, str);
 
 	set_fs(fs);
 }
@@ -228,18 +229,18 @@ static void __die(const char *str, int err, struct thread_info *thread, struct p
 	struct task_struct *tsk = thread->task;
 	static int die_counter;
 
-	printk("Internal error: %s: %x [#%d]" S_PREEMPT S_SMP "\n",
+	printk(KERN_EMERG "Internal error: %s: %x [#%d]" S_PREEMPT S_SMP "\n",
 	       str, err, ++die_counter);
 	print_modules();
 	__show_regs(regs);
-	printk("Process %s (pid: %d, stack limit = 0x%p)\n",
-		tsk->comm, task_pid_nr(tsk), thread + 1);
+	printk(KERN_EMERG "Process %.*s (pid: %d, stack limit = 0x%p)\n",
+		TASK_COMM_LEN, tsk->comm, task_pid_nr(tsk), thread + 1);
 
 	if (!user_mode(regs) || in_interrupt()) {
-		dump_mem("Stack: ", regs->ARM_sp,
+		dump_mem(KERN_EMERG, "Stack: ", regs->ARM_sp,
 			 THREAD_SIZE + (unsigned long)task_stack_page(tsk));
 		dump_backtrace(regs, tsk);
-		dump_instr(regs);
+		dump_instr(KERN_EMERG, regs);
 	}
 }
 
@@ -353,7 +354,7 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
 	if (user_debug & UDBG_UNDEFINED) {
 		printk(KERN_INFO "%s (%d): undefined instruction: pc=%p\n",
 			current->comm, task_pid_nr(current), pc);
-		dump_instr(regs);
+		dump_instr(KERN_INFO, regs);
 	}
 #endif
 
@@ -404,7 +405,7 @@ static int bad_syscall(int n, struct pt_regs *regs)
 	if (user_debug & UDBG_SYSCALL) {
 		printk(KERN_ERR "[%d] %s: obsolete system call %08x.\n",
 			task_pid_nr(current), current->comm, n);
-		dump_instr(regs);
+		dump_instr(KERN_ERR, regs);
 	}
 #endif
 
@@ -583,7 +584,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
 	if (user_debug & UDBG_SYSCALL) {
 		printk("[%d] %s: arm syscall %d\n",
 		       task_pid_nr(current), current->comm, no);
-		dump_instr(regs);
+		dump_instr("", regs);
 		if (user_mode(regs)) {
 			__show_regs(regs);
 			c_backtrace(regs->ARM_fp, processor_mode(regs));
@@ -660,7 +661,7 @@ baddataabort(int code, unsigned long instr, struct pt_regs *regs)
 	if (user_debug & UDBG_BADABORT) {
 		printk(KERN_ERR "[%d] %s: bad data abort: code %d instr 0x%08lx\n",
 			task_pid_nr(current), current->comm, code, instr);
-		dump_instr(regs);
+		dump_instr(KERN_ERR, regs);
 		show_pte(current->mm, addr);
 	}
 #endif
-- 
cgit v1.2.3


From 03a6e5bd5ba7d2a37b0bf4327b83d7c83311b0a1 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun, 11 Oct 2009 15:25:05 +0100
Subject: ARM: update die() output

Make die() better match x86:
- add printing of the last accessed sysfs file
- ensure console_verbose() is called under the lock
- ensure we panic outside of oops_exit()

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/traps.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index b551b650496..f838f36eb70 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -231,6 +231,7 @@ static void __die(const char *str, int err, struct thread_info *thread, struct p
 
 	printk(KERN_EMERG "Internal error: %s: %x [#%d]" S_PREEMPT S_SMP "\n",
 	       str, err, ++die_counter);
+	sysfs_printk_last_file();
 	print_modules();
 	__show_regs(regs);
 	printk(KERN_EMERG "Process %.*s (pid: %d, stack limit = 0x%p)\n",
@@ -255,13 +256,14 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
 
 	oops_enter();
 
-	console_verbose();
 	spin_lock_irq(&die_lock);
+	console_verbose();
 	bust_spinlocks(1);
 	__die(str, err, thread, regs);
 	bust_spinlocks(0);
 	add_taint(TAINT_DIE);
 	spin_unlock_irq(&die_lock);
+	oops_exit();
 
 	if (in_interrupt())
 		panic("Fatal exception in interrupt");
@@ -269,7 +271,6 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
 	if (panic_on_oops)
 		panic("Fatal exception");
 
-	oops_exit();
 	do_exit(SIGSEGV);
 }
 
-- 
cgit v1.2.3


From e9ac829185c5d17787d78c13c05a40c39d660239 Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@cmpxchg.org>
Date: Tue, 21 Jul 2009 17:08:28 +0200
Subject: ARM: boolean bit testing

Bit testing (test, testset, testclear, testchange) for bit numbers
known at compile time returns a word with the tested-for bit set.

Change it to return a true boolean value so to make it consistent with
the out-of-line path and all the other bitops implementations.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/bitops.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/bitops.h b/arch/arm/include/asm/bitops.h
index 63a481fbbed..338ff19ae44 100644
--- a/arch/arm/include/asm/bitops.h
+++ b/arch/arm/include/asm/bitops.h
@@ -84,7 +84,7 @@ ____atomic_test_and_set_bit(unsigned int bit, volatile unsigned long *p)
 	*p = res | mask;
 	raw_local_irq_restore(flags);
 
-	return res & mask;
+	return (res & mask) != 0;
 }
 
 static inline int
@@ -101,7 +101,7 @@ ____atomic_test_and_clear_bit(unsigned int bit, volatile unsigned long *p)
 	*p = res & ~mask;
 	raw_local_irq_restore(flags);
 
-	return res & mask;
+	return (res & mask) != 0;
 }
 
 static inline int
@@ -118,7 +118,7 @@ ____atomic_test_and_change_bit(unsigned int bit, volatile unsigned long *p)
 	*p = res ^ mask;
 	raw_local_irq_restore(flags);
 
-	return res & mask;
+	return (res & mask) != 0;
 }
 
 #include <asm-generic/bitops/non-atomic.h>
-- 
cgit v1.2.3


From 6a5e293f1b34920c69a932ce37b4a4714a428dc7 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun, 11 Oct 2009 16:29:48 +0100
Subject: ARM: Add kmap_atomic type debugging

Seemingly this support was missed when highmem was added, so
DEBUG_HIGHMEM wouldn't have checked the kmap_atomic type.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/highmem.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c
index 73cae57fa70..30f82fb5918 100644
--- a/arch/arm/mm/highmem.c
+++ b/arch/arm/mm/highmem.c
@@ -46,6 +46,8 @@ void *kmap_atomic(struct page *page, enum km_type type)
 	if (!PageHighMem(page))
 		return page_address(page);
 
+	debug_kmap_atomic(type);
+
 	kmap = kmap_high_get(page);
 	if (kmap)
 		return kmap;
-- 
cgit v1.2.3


From d43c36dc6b357fa1806800f18aa30123c747a6d1 Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Wed, 7 Oct 2009 17:09:06 +0400
Subject: headers: remove sched.h from interrupt.h

After m68k's task_thread_info() doesn't refer to current,
it's possible to remove sched.h from interrupt.h and not break m68k!
Many thanks to Heiko Carstens for allowing this.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
---
 arch/arm/kernel/time.c            | 1 +
 arch/arm/mach-integrator/pci_v3.c | 1 +
 arch/arm/plat-s3c24xx/adc.c       | 1 +
 3 files changed, 3 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index 4cdc4a0bd02..d38cdf2c827 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -21,6 +21,7 @@
 #include <linux/interrupt.h>
 #include <linux/time.h>
 #include <linux/init.h>
+#include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/timex.h>
 #include <linux/errno.h>
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index 901cc205015..148d25fc636 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -31,6 +31,7 @@
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
+#include <asm/signal.h>
 #include <asm/system.h>
 #include <asm/mach/pci.h>
 #include <asm/irq_regs.h>
diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
index 11117a7ba91..4d36b784fb8 100644
--- a/arch/arm/plat-s3c24xx/adc.c
+++ b/arch/arm/plat-s3c24xx/adc.c
@@ -14,6 +14,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
+#include <linux/sched.h>
 #include <linux/list.h>
 #include <linux/err.h>
 #include <linux/clk.h>
-- 
cgit v1.2.3


From c639ef431797813a9ab509e7cb5c77a080277a5b Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Wed, 16 Sep 2009 11:06:52 +0200
Subject: [ARM] pxa/csb726: adjust duplicate structure field initialization

Currently the irq_type field of the csb726_lan_config structure is
initialized twice.  The value in the first case,
SMSC911X_IRQ_POLARITY_ACTIVE_LOW, is normally stored in the irq_polarity
field, so I have renamed the field in the first initialization to that.

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/csb726.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 79141f86272..965480eb4fe 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -238,7 +238,7 @@ static struct resource csb726_lan_resources[] = {
 };
 
 struct smsc911x_platform_config csb726_lan_config = {
-	.irq_type	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
 	.flags		= SMSC911X_USE_32BIT,
 	.phy_interface	= PHY_INTERFACE_MODE_MII,
-- 
cgit v1.2.3


From 4367216a099b4df3fa2c4f2b086cda1a1e9afc4e Mon Sep 17 00:00:00 2001
From: Dennis O'Brien <dennis.obrien@eqware.net>
Date: Sat, 10 Oct 2009 15:08:52 +0800
Subject: [ARM] pxa: workaround errata #37 by not using half turbo switching

PXA27x Errata #37 implies system will hang when switching into or out of
half turbo (HT bit in CLKCFG) mode, workaround this by not using it.

Signed-off-by: Dennis O'Brien <dennis.obrien@eqware.net>
Cc: stable-2.6.31 <stable@kernel.org>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/cpufreq-pxa2xx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index 3a8ee2272ad..983cc8c2008 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -155,7 +155,7 @@ MODULE_PARM_DESC(pxa255_turbo_table, "Selects the frequency table (0 = run table
 
 static pxa_freqs_t pxa27x_freqs[] = {
 	{104000, 104000, PXA27x_CCCR(1,	 8, 2), 0, CCLKCFG2(1, 0, 1),  900000, 1705000 },
-	{156000, 104000, PXA27x_CCCR(1,	 8, 6), 0, CCLKCFG2(1, 1, 1), 1000000, 1705000 },
+	{156000, 104000, PXA27x_CCCR(1,	 8, 3), 0, CCLKCFG2(1, 0, 1), 1000000, 1705000 },
 	{208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1), 1180000, 1705000 },
 	{312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1), 1250000, 1705000 },
 	{416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1), 1350000, 1705000 },
-- 
cgit v1.2.3


From 787b2faadc4356b6c2c71feb42fb944fece9a12f Mon Sep 17 00:00:00 2001
From: Nitin Gupta <ngupta@vflare.org>
Date: Mon, 12 Oct 2009 14:20:23 +0530
Subject: ARM: force dcache flush if dcache_dirty bit set

On ARM, update_mmu_cache() does dcache flush for a page only if
it has a kernel mapping (page_mapping(page) != NULL). The correct
behavior would be to force the flush based on dcache_dirty bit only.

One of the cases where present logic would be a problem is when
a RAM based block device[1] is used as a swap disk. In this case,
we would have in-memory data corruption as shown in steps below:

do_swap_page()
{
    - Allocate a new page (if not already in swap cache)
    - Issue read from swap disk
        - Block driver issues flush_dcache_page()
        - flush_dcache_page() simply sets PG_dcache_dirty bit and does not
          actually issue a flush since this page has no user space mapping yet.
    - Now, if swap disk is almost full, this newly read page is removed
      from swap cache and corrsponding swap slot is freed.
    - Map this page anonymously in user space.
    - update_mmu_cache()
        - Since this page does not have kernel mapping (its not in page/swap
          cache and is mapped anonymously), it does not issue dcache flush
          even if dcache_dirty bit is set by flush_dcache_page() above.

    <user now gets stale data since dcache was never flushed>
}

Same problem exists on mips too.

[1] example:
 - brd (RAM based block device)
 - ramzswap (RAM based compressed swap device)

Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/fault-armv.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index bc0099d5ae8..d0d17b6a370 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -153,14 +153,11 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
 
 	page = pfn_to_page(pfn);
 	mapping = page_mapping(page);
-	if (mapping) {
 #ifndef CONFIG_SMP
-		int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags);
-
-		if (dirty)
-			__flush_dcache_page(mapping, page);
+	if (test_and_clear_bit(PG_dcache_dirty, &page->flags))
+		__flush_dcache_page(mapping, page);
 #endif
-
+	if (mapping) {
 		if (cache_is_vivt())
 			make_coherent(mapping, vma, addr, pfn);
 		else if (vma->vm_flags & VM_EXEC)
-- 
cgit v1.2.3


From 6153384161222c855bb95ca3eee3b3d89ae2c9dd Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 24 Sep 2009 10:01:53 +0200
Subject: pcm038: Add SPI/MC13783 support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/pcm038.c | 96 +++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 94 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index ee65dda584c..906d59b0a7a 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -23,6 +23,10 @@
 #include <linux/mtd/plat-ram.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
+#include <linux/irq.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -35,6 +39,7 @@
 #include <mach/iomux.h>
 #include <mach/imx-uart.h>
 #include <mach/mxc_nand.h>
+#include <mach/spi.h>
 
 #include "devices.h"
 
@@ -78,8 +83,6 @@ static int pcm038_pins[] = {
 	PC6_PF_I2C2_SCL,
 	/* SPI1 */
 	PD25_PF_CSPI1_RDY,
-	PD27_PF_CSPI1_SS1,
-	PD28_PF_CSPI1_SS0,
 	PD29_PF_CSPI1_SCLK,
 	PD30_PF_CSPI1_MISO,
 	PD31_PF_CSPI1_MOSI,
@@ -196,6 +199,86 @@ static struct i2c_board_info pcm038_i2c_devices[] = {
 	}
 };
 
+static int pcm038_spi_cs[] = {GPIO_PORTD + 28};
+
+static struct spi_imx_master pcm038_spi_0_data = {
+	.chipselect = pcm038_spi_cs,
+	.num_chipselect = ARRAY_SIZE(pcm038_spi_cs),
+};
+
+static struct regulator_consumer_supply sdhc1_consumers[] = {
+	{
+		.dev	= &mxc_sdhc_device1.dev,
+		.supply	= "sdhc_vcc",
+	},
+};
+
+static struct regulator_init_data sdhc1_data = {
+	.constraints = {
+		.min_uV = 3000000,
+		.max_uV = 3400000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL |
+			REGULATOR_MODE_FAST,
+		.always_on = 0,
+		.boot_on = 0,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(sdhc1_consumers),
+	.consumer_supplies = sdhc1_consumers,
+};
+
+static struct regulator_consumer_supply cam_consumers[] = {
+	{
+		.dev	= NULL,
+		.supply	= "imx_cam_vcc",
+	},
+};
+
+static struct regulator_init_data cam_data = {
+	.constraints = {
+		.min_uV = 3000000,
+		.max_uV = 3400000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL |
+			REGULATOR_MODE_FAST,
+		.always_on = 0,
+		.boot_on = 0,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(cam_consumers),
+	.consumer_supplies = cam_consumers,
+};
+
+struct mc13783_regulator_init_data pcm038_regulators[] = {
+	{
+		.id = MC13783_REGU_VCAM,
+		.init_data = &cam_data,
+	}, {
+		.id = MC13783_REGU_VMMC1,
+		.init_data = &sdhc1_data,
+	},
+};
+
+static struct mc13783_platform_data pcm038_pmic = {
+	.regulators = pcm038_regulators,
+	.num_regulators = ARRAY_SIZE(pcm038_regulators),
+	.flags = MC13783_USE_ADC | MC13783_USE_REGULATOR |
+		 MC13783_USE_TOUCHSCREEN,
+};
+
+static struct spi_board_info pcm038_spi_board_info[] __initdata = {
+	{
+		.modalias = "mc13783",
+		.irq = IRQ_GPIOB(23),
+		.max_speed_hz = 300000,
+		.bus_num = 0,
+		.chip_select = 0,
+		.platform_data = &pcm038_pmic,
+		.mode = SPI_CS_HIGH,
+	}
+};
+
 static void __init pcm038_init(void)
 {
 	mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
@@ -219,6 +302,15 @@ static void __init pcm038_init(void)
 	/* PE18 for user-LED D40 */
 	mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT);
 
+	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+
+	/* MC13783 IRQ */
+	mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN);
+
+	mxc_register_device(&mxc_spi_device0, &pcm038_spi_0_data);
+	spi_register_board_info(pcm038_spi_board_info,
+				ARRAY_SIZE(pcm038_spi_board_info));
+
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 #ifdef CONFIG_MACH_PCM970_BASEBOARD
-- 
cgit v1.2.3


From a90c31a3b70bcef915ffddacb8cbb4e63de33415 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue, 6 Oct 2009 09:18:17 +0200
Subject: pcm970 mmc: Fix ro switch

We have to use mxc_gpio_mode() for the card detection pin
instead of mxc_gpio_setup_multiple_pins() because the latter
does a gpio_request() and thus a later gpio_request() fails.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/pcm970-baseboard.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index c261f59b0b4..3cb7f457e5d 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -39,7 +39,6 @@ static int pcm970_pins[] = {
 	PB7_PF_SD2_D3,
 	PB8_PF_SD2_CMD,
 	PB9_PF_SD2_CLK,
-	GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN, /* card detect */
 	/* display */
 	PA5_PF_LSCLK,
 	PA6_PF_LD0,
@@ -228,6 +227,7 @@ void __init pcm970_baseboard_init(void)
 			"PCM970");
 
 	mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
+	mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN);
 	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
 	platform_device_register(&pcm970_sja1000);
 }
-- 
cgit v1.2.3


From 324c1aa3dfb4235c80df603e761cc06e28a7e903 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Mon, 5 Oct 2009 10:00:58 +0200
Subject: fix compilation of i.MX31 platforms

mxc_iomux_v3_init() is defined in arch/arm/plat-mxc/iomux-v3.c, which is
not linked for i.MX31 and produces an undefined reference error. Fix this
by building the offending code only for i.MX35.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/mm.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index ad5a1122d76..bedf5b8d976 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -81,6 +81,7 @@ void __init mx31_map_io(void)
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
 
+#ifdef CONFIG_ARCH_MX35
 void __init mx35_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX35);
@@ -89,6 +90,7 @@ void __init mx35_map_io(void)
 
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
+#endif
 
 void __init mx31_init_irq(void)
 {
-- 
cgit v1.2.3


From d9e8b88478be7c8cd3fab91213c05e6194de294e Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Mon, 5 Oct 2009 16:49:12 +0200
Subject: fix pcm037_eet compilation with the new SPI driver

Fix pcm037_eet compilation with the new imx SPI driver by unifying
platform device names.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/devices.c | 24 ++++++++++++------------
 arch/arm/mach-mx3/devices.h |  6 +++---
 2 files changed, 15 insertions(+), 15 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index 8a577f36725..e6abe181b96 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -459,7 +459,7 @@ struct platform_device mxc_usbh2 = {
  * SPI master controller
  * 3 channels
  */
-static struct resource imx_spi_0_resources[] = {
+static struct resource mxc_spi_0_resources[] = {
 	{
 	       .start = CSPI1_BASE_ADDR,
 	       .end = CSPI1_BASE_ADDR + SZ_4K - 1,
@@ -471,7 +471,7 @@ static struct resource imx_spi_0_resources[] = {
 	},
 };
 
-static struct resource imx_spi_1_resources[] = {
+static struct resource mxc_spi_1_resources[] = {
 	{
 		.start = CSPI2_BASE_ADDR,
 		.end = CSPI2_BASE_ADDR + SZ_4K - 1,
@@ -483,7 +483,7 @@ static struct resource imx_spi_1_resources[] = {
 	},
 };
 
-static struct resource imx_spi_2_resources[] = {
+static struct resource mxc_spi_2_resources[] = {
 	{
 		.start = CSPI3_BASE_ADDR,
 		.end = CSPI3_BASE_ADDR + SZ_4K - 1,
@@ -495,25 +495,25 @@ static struct resource imx_spi_2_resources[] = {
 	},
 };
 
-struct platform_device imx_spi_device0 = {
+struct platform_device mxc_spi_device0 = {
 	.name = "spi_imx",
 	.id = 0,
-	.num_resources = ARRAY_SIZE(imx_spi_0_resources),
-	.resource = imx_spi_0_resources,
+	.num_resources = ARRAY_SIZE(mxc_spi_0_resources),
+	.resource = mxc_spi_0_resources,
 };
 
-struct platform_device imx_spi_device1 = {
+struct platform_device mxc_spi_device1 = {
 	.name = "spi_imx",
 	.id = 1,
-	.num_resources = ARRAY_SIZE(imx_spi_1_resources),
-	.resource = imx_spi_1_resources,
+	.num_resources = ARRAY_SIZE(mxc_spi_1_resources),
+	.resource = mxc_spi_1_resources,
 };
 
-struct platform_device imx_spi_device2 = {
+struct platform_device mxc_spi_device2 = {
 	.name = "spi_imx",
 	.id = 2,
-	.num_resources = ARRAY_SIZE(imx_spi_2_resources),
-	.resource = imx_spi_2_resources,
+	.num_resources = ARRAY_SIZE(mxc_spi_2_resources),
+	.resource = mxc_spi_2_resources,
 };
 
 #ifdef CONFIG_ARCH_MX35
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index 79f2be45d13..ab87419dc9a 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -20,7 +20,7 @@ extern struct platform_device mxc_otg_host;
 extern struct platform_device mxc_usbh1;
 extern struct platform_device mxc_usbh2;
 extern struct platform_device mxc_rnga_device;
-extern struct platform_device imx_spi_device0;
-extern struct platform_device imx_spi_device1;
-extern struct platform_device imx_spi_device2;
+extern struct platform_device mxc_spi_device0;
+extern struct platform_device mxc_spi_device1;
+extern struct platform_device mxc_spi_device2;
 
-- 
cgit v1.2.3


From 679bfef0e366109483981899401b98b8a65ed06c Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Thu, 8 Oct 2009 18:12:24 +0200
Subject: MXC: fix reset for mx31, mx35 and mx27 SoCs

The clock name for the watchdog devices was not set consistently
with mx21 on these platforms, resulting in the reset not to work.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/clock_imx27.c | 2 +-
 arch/arm/mach-mx3/clock-imx35.c | 2 +-
 arch/arm/mach-mx3/clock.c       | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index 174fa3e3094..ff5e3329891 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -665,7 +665,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "sahara2", sahara2_clk)
 	_REGISTER_CLOCK(NULL, "ata", ata_clk)
 	_REGISTER_CLOCK(NULL, "mstick", mstick_clk)
-	_REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
 	_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
 	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
 	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index fe5c4217322..c595260ec1f 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -443,7 +443,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
 	_REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
-	_REGISTER_CLOCK("mxc_wdt.0", NULL, wdog_clk)
+	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
 	_REGISTER_CLOCK(NULL, "max", max_clk)
 	_REGISTER_CLOCK(NULL, "admux", admux_clk)
 	_REGISTER_CLOCK(NULL, "csi", csi_clk)
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 06bd6180bfc..b2a3bcf8266 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -530,7 +530,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
 	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
 	_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
-	_REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
 	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
 	_REGISTER_CLOCK(NULL, "epit", epit1_clk)
 	_REGISTER_CLOCK(NULL, "epit", epit2_clk)
-- 
cgit v1.2.3


From a771fe6e4e3e58f2056823ef9c30a554ec48f453 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Mon, 12 Oct 2009 17:31:20 +0100
Subject: ARM: 5757/1: Thumb-2: Correct "mov.w pc, lr" instruction which is
 unpredictable

The 32-bit wide variant of "mov pc, reg" in Thumb-2 is unpredictable
causing improper handling of the undefined instructions not caught by
the kernel. This patch adds a movw_pc macro for such situations
(currently only used in call_fpe).

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/entry-armv.S   | 28 ++++++++++++++--------------
 arch/arm/kernel/entry-header.S | 15 +++++++++++++++
 2 files changed, 29 insertions(+), 14 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 322410be573..0022b4d57f8 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -608,33 +608,33 @@ call_fpe:
  THUMB(	add	pc, r8			)
 	nop
 
-	W(mov)	pc, lr				@ CP#0
+	movw_pc	lr				@ CP#0
 	W(b)	do_fpe				@ CP#1 (FPE)
 	W(b)	do_fpe				@ CP#2 (FPE)
-	W(mov)	pc, lr				@ CP#3
+	movw_pc	lr				@ CP#3
 #ifdef CONFIG_CRUNCH
 	b	crunch_task_enable		@ CP#4 (MaverickCrunch)
 	b	crunch_task_enable		@ CP#5 (MaverickCrunch)
 	b	crunch_task_enable		@ CP#6 (MaverickCrunch)
 #else
-	W(mov)	pc, lr				@ CP#4
-	W(mov)	pc, lr				@ CP#5
-	W(mov)	pc, lr				@ CP#6
+	movw_pc	lr				@ CP#4
+	movw_pc	lr				@ CP#5
+	movw_pc	lr				@ CP#6
 #endif
-	W(mov)	pc, lr				@ CP#7
-	W(mov)	pc, lr				@ CP#8
-	W(mov)	pc, lr				@ CP#9
+	movw_pc	lr				@ CP#7
+	movw_pc	lr				@ CP#8
+	movw_pc	lr				@ CP#9
 #ifdef CONFIG_VFP
 	W(b)	do_vfp				@ CP#10 (VFP)
 	W(b)	do_vfp				@ CP#11 (VFP)
 #else
-	W(mov)	pc, lr				@ CP#10 (VFP)
-	W(mov)	pc, lr				@ CP#11 (VFP)
+	movw_pc	lr				@ CP#10 (VFP)
+	movw_pc	lr				@ CP#11 (VFP)
 #endif
-	W(mov)	pc, lr				@ CP#12
-	W(mov)	pc, lr				@ CP#13
-	W(mov)	pc, lr				@ CP#14 (Debug)
-	W(mov)	pc, lr				@ CP#15 (Control)
+	movw_pc	lr				@ CP#12
+	movw_pc	lr				@ CP#13
+	movw_pc	lr				@ CP#14 (Debug)
+	movw_pc	lr				@ CP#15 (Control)
 
 #ifdef CONFIG_NEON
 	.align	6
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index ac34c0d9384..7e9ed1eea40 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -110,6 +110,13 @@
 	mov	\rd, sp, lsr #13
 	mov	\rd, \rd, lsl #13
 	.endm
+
+	@
+	@ 32-bit wide "mov pc, reg"
+	@
+	.macro	movw_pc, reg
+	mov	pc, \reg
+	.endm
 #else	/* CONFIG_THUMB2_KERNEL */
 	.macro	svc_exit, rpsr
 	clrex					@ clear the exclusive monitor
@@ -146,6 +153,14 @@
 	lsr	\rd, \rd, #13
 	mov	\rd, \rd, lsl #13
 	.endm
+
+	@
+	@ 32-bit wide "mov pc, reg"
+	@
+	.macro	movw_pc, reg
+	mov	pc, \reg
+	nop
+	.endm
 #endif	/* !CONFIG_THUMB2_KERNEL */
 
 /*
-- 
cgit v1.2.3


From cde3f8607350666c4dd120dbbdbd9c70ffb2ea61 Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <dedekind1@gmail.com>
Date: Tue, 13 Oct 2009 08:54:30 +0100
Subject: ARM: 5759/1: Add register information of threads to coredump

Defines ELF_CORE_COPY_TASK_REGS so that CPU register information
of every thread is included in coredump. Without this, only the faulting
thread is coredumped.

Cc: Roger Quadros <ext-roger.quadros@nokia.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/elf.h | 3 +++
 arch/arm/kernel/process.c  | 9 +++++++++
 2 files changed, 12 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index c3b911ee915..6aac3f5bb2f 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -98,6 +98,9 @@ extern int elf_check_arch(const struct elf32_hdr *);
 extern int arm_elf_read_implies_exec(const struct elf32_hdr *, int);
 #define elf_read_implies_exec(ex,stk) arm_elf_read_implies_exec(&(ex), stk)
 
+int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs);
+#define ELF_CORE_COPY_TASK_REGS dump_task_regs
+
 #define USE_ELF_CORE_DUMP
 #define ELF_EXEC_PAGESIZE	4096
 
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 790fbee92ec..0d96d0171c0 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -327,6 +327,15 @@ copy_thread(unsigned long clone_flags, unsigned long stack_start,
 	return 0;
 }
 
+/*
+ * Fill in the task's elfregs structure for a core dump.
+ */
+int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs)
+{
+	elf_core_copy_regs(elfregs, task_pt_regs(t));
+	return 1;
+}
+
 /*
  * fill in the fpe structure for a core dump...
  */
-- 
cgit v1.2.3


From 3d977c012f1af4a867939fa21ad502d5279fa0a0 Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Wed, 14 Oct 2009 01:56:10 +0100
Subject: ARM: 5760/1: ep93xx: fix build error in edb93xx.c

Fix a build error due to a typo (missing comma) in:

	ARM: 5754/1: ep93xx: update i2c support

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/edb93xx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index ca71cf1a72a..a4a7be30800 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -112,7 +112,7 @@ static void __init edb93xx_register_i2c(void)
 				    ARRAY_SIZE(edb93xxa_i2c_board_info));
 	} else if (machine_is_edb9307() || machine_is_edb9312() ||
 		   machine_is_edb9315()) {
-		ep93xx_register_i2c(&edb93xx_i2c_gpio_data
+		ep93xx_register_i2c(&edb93xx_i2c_gpio_data,
 				    edb93xx_i2c_board_info,
 				    ARRAY_SIZE(edb93xx_i2c_board_info));
 	}
-- 
cgit v1.2.3


From dc6e56b199a5b11b53786c67f5f1c7af0195d223 Mon Sep 17 00:00:00 2001
From: Sanjeev Premi <premi@ti.com>
Date: Wed, 14 Oct 2009 09:56:33 -0700
Subject: omap: CONFIG_ISP1301_OMAP redefined in Beagle defconfig

The symbol CONFIG_ISP1301_OMAP was defined twice in the
defconfig. This was causing the warning:
arch/arm/configs/omap3_beagle_defconfig:972:warning:
 override: reassigning to symbol ISP1301_OMAP

Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/configs/omap3_beagle_defconfig | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/configs/omap3_beagle_defconfig b/arch/arm/configs/omap3_beagle_defconfig
index 357d4021e2d..b3c8cce0f8f 100644
--- a/arch/arm/configs/omap3_beagle_defconfig
+++ b/arch/arm/configs/omap3_beagle_defconfig
@@ -969,7 +969,6 @@ CONFIG_USB_ETH_RNDIS=y
 #
 CONFIG_USB_OTG_UTILS=y
 # CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
 CONFIG_TWL4030_USB=y
 # CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-- 
cgit v1.2.3


From 70cf644c34a5f2dd183b4f01b0e8cdac834c1e17 Mon Sep 17 00:00:00 2001
From: Anuj Aggarwal <anuj.aggarwal@ti.com>
Date: Wed, 14 Oct 2009 09:56:34 -0700
Subject: omap: SDMA: Fixing bug in omap_dma_set_global_params()

Argument tparams was not being used to program
global register GCR.HI_THREAD_RESERVED. This patch fixes the same.

Signed-off-by: Anuj Aggarwal <anuj.aggarwal@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/dma.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index fd3154ae69b..0eb676d7e80 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -829,10 +829,10 @@ EXPORT_SYMBOL(omap_free_dma);
  *
  * @param arb_rate
  * @param max_fifo_depth
- * @param tparams - Number of thereads to reserve : DMA_THREAD_RESERVE_NORM
- * 						    DMA_THREAD_RESERVE_ONET
- * 						    DMA_THREAD_RESERVE_TWOT
- * 						    DMA_THREAD_RESERVE_THREET
+ * @param tparams - Number of threads to reserve : DMA_THREAD_RESERVE_NORM
+ * 						   DMA_THREAD_RESERVE_ONET
+ * 						   DMA_THREAD_RESERVE_TWOT
+ * 						   DMA_THREAD_RESERVE_THREET
  */
 void
 omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams)
@@ -844,11 +844,14 @@ omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams)
 		return;
 	}
 
+	if (max_fifo_depth == 0)
+		max_fifo_depth = 1;
 	if (arb_rate == 0)
 		arb_rate = 1;
 
-	reg = (arb_rate & 0xff) << 16;
-	reg |= (0xff & max_fifo_depth);
+	reg = 0xff & max_fifo_depth;
+	reg |= (0x3 & tparams) << 12;
+	reg |= (arb_rate & 0xff) << 16;
 
 	dma_write(reg, GCR);
 }
-- 
cgit v1.2.3


From cb3cc45ad9e55f673c336ad9d013dcdc3a84390b Mon Sep 17 00:00:00 2001
From: Aaro Koskinen <Aaro.Koskinen@nokia.com>
Date: Wed, 14 Oct 2009 09:56:34 -0700
Subject: omap: RX-51: Drop I2C-1 speed to 2200

The I2C-1 bus frequency on RX-51 should be 2.2 MHz. The speed is limited
by TWL5030/GAIA; a higher speed could lead to errors on the interface. The
maximum speed depends on the system clock for GAIA: 2.2 MHz (if 19.2 MHz),
2.4 MHz (26 MHz) or 2.9 MHz (38.4 MHz).

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-rx51-peripherals.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index c1af5326e92..2b0eb1ba5d7 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -444,7 +444,7 @@ static int __init rx51_i2c_init(void)
 		rx51_twldata.vaux3 = &rx51_vaux3_cam;
 		rx51_twldata.vmmc2 = &rx51_vmmc2;
 	}
-	omap_register_i2c_bus(1, 2600, rx51_peripherals_i2c_board_info_1,
+	omap_register_i2c_bus(1, 2200, rx51_peripherals_i2c_board_info_1,
 			ARRAY_SIZE(rx51_peripherals_i2c_board_info_1));
 	omap_register_i2c_bus(2, 100, NULL, 0);
 	omap_register_i2c_bus(3, 400, NULL, 0);
-- 
cgit v1.2.3


From 02563a5d56ac1d3978118c8498ae301d68ef7942 Mon Sep 17 00:00:00 2001
From: Teerth Reddy <teerth@ti.com>
Date: Wed, 14 Oct 2009 09:56:35 -0700
Subject: omap: Initialization of SDRC params on Zoom2

This patch initializes the correct SDRC settings required
for DVFS on Zoom2.

Signed-off-by: Teerth Reddy <teerth@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-zoom2.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index b7b32208ced..fd3369d5e5c 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -25,6 +25,7 @@
 #include <mach/keypad.h>
 
 #include "mmc-twl4030.h"
+#include "sdram-micron-mt46h32m32lf-6.h"
 
 /* Zoom2 has Qwerty keyboard*/
 static int board_keymap[] = {
@@ -213,7 +214,8 @@ static void __init omap_zoom2_init_irq(void)
 {
 	omap_board_config = zoom2_config;
 	omap_board_config_size = ARRAY_SIZE(zoom2_config);
-	omap2_init_common_hw(NULL, NULL);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+				 mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
 	omap_gpio_init();
 }
-- 
cgit v1.2.3


From a93d4ed2052d19029802ce14bb6e4b2f212d0cad Mon Sep 17 00:00:00 2001
From: Jarkko Nikula <jhnikula@gmail.com>
Date: Wed, 14 Oct 2009 09:56:35 -0700
Subject: omap: McBSP: Fix incorrect receiver stop in omap_mcbsp_stop

This small typo written by author causes that McBSP receiver is disabled on
OMAP2430 and OMAP3430 even if only transmitter is stopped. This was noted
with ALSA SoC where simultaneous recording halted if playback was stopped
first.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/mcbsp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 88ac9768f1c..e664b912d7b 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -595,7 +595,7 @@ void omap_mcbsp_stop(unsigned int id, int tx, int rx)
 	rx &= 1;
 	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
 		w = OMAP_MCBSP_READ(io_base, RCCR);
-		w |= (tx ? RDISABLE : 0);
+		w |= (rx ? RDISABLE : 0);
 		OMAP_MCBSP_WRITE(io_base, RCCR, w);
 	}
 	w = OMAP_MCBSP_READ(io_base, SPCR1);
-- 
cgit v1.2.3


From a0219fbdacc01e039d1b158d16141349a3309915 Mon Sep 17 00:00:00 2001
From: Kalle Jokiniemi <kalle.jokiniemi@digia.com>
Date: Wed, 14 Oct 2009 16:40:37 -0600
Subject: OMAP: Fix race condition with autodeps

There is a possible race condition in clockdomain
code handling hw supported idle transitions.

When multiple autodeps dependencies are being added
or removed, a transition of still remaining dependent
powerdomain can result in false readings of the
state counter. This is especially fatal for off mode
state counter, as it could result in a driver not
noticing a context loss.

Fixed by disabling hw supported state transitions
when autodeps are being changed.

Signed-off-by: Kalle Jokiniemi <kalle.jokiniemi@digia.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/clockdomain.c | 74 +++++++++++++++++++++++----------------
 1 file changed, 44 insertions(+), 30 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 4ef7b4f5474..58aff8485df 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -137,6 +137,36 @@ static void _clkdm_del_autodeps(struct clockdomain *clkdm)
 	}
 }
 
+/*
+ * _omap2_clkdm_set_hwsup - set the hwsup idle transition bit
+ * @clkdm: struct clockdomain *
+ * @enable: int 0 to disable, 1 to enable
+ *
+ * Internal helper for actually switching the bit that controls hwsup
+ * idle transitions for clkdm.
+ */
+static void _omap2_clkdm_set_hwsup(struct clockdomain *clkdm, int enable)
+{
+	u32 v;
+
+	if (cpu_is_omap24xx()) {
+		if (enable)
+			v = OMAP24XX_CLKSTCTRL_ENABLE_AUTO;
+		else
+			v = OMAP24XX_CLKSTCTRL_DISABLE_AUTO;
+	} else if (cpu_is_omap34xx()) {
+		if (enable)
+			v = OMAP34XX_CLKSTCTRL_ENABLE_AUTO;
+		else
+			v = OMAP34XX_CLKSTCTRL_DISABLE_AUTO;
+	} else {
+		BUG();
+	}
+
+	cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask,
+			    v << __ffs(clkdm->clktrctrl_mask),
+			    clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL);
+}
 
 static struct clockdomain *_clkdm_lookup(const char *name)
 {
@@ -456,8 +486,6 @@ int omap2_clkdm_wakeup(struct clockdomain *clkdm)
  */
 void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
 {
-	u32 v;
-
 	if (!clkdm)
 		return;
 
@@ -473,18 +501,7 @@ void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
 	if (atomic_read(&clkdm->usecount) > 0)
 		_clkdm_add_autodeps(clkdm);
 
-	if (cpu_is_omap24xx())
-		v = OMAP24XX_CLKSTCTRL_ENABLE_AUTO;
-	else if (cpu_is_omap34xx())
-		v = OMAP34XX_CLKSTCTRL_ENABLE_AUTO;
-	else
-		BUG();
-
-
-	cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask,
-			    v << __ffs(clkdm->clktrctrl_mask),
-			    clkdm->pwrdm.ptr->prcm_offs,
-			    CM_CLKSTCTRL);
+	_omap2_clkdm_set_hwsup(clkdm, 1);
 
 	pwrdm_clkdm_state_switch(clkdm);
 }
@@ -500,8 +517,6 @@ void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
  */
 void omap2_clkdm_deny_idle(struct clockdomain *clkdm)
 {
-	u32 v;
-
 	if (!clkdm)
 		return;
 
@@ -514,16 +529,7 @@ void omap2_clkdm_deny_idle(struct clockdomain *clkdm)
 	pr_debug("clockdomain: disabling automatic idle transitions for %s\n",
 		 clkdm->name);
 
-	if (cpu_is_omap24xx())
-		v = OMAP24XX_CLKSTCTRL_DISABLE_AUTO;
-	else if (cpu_is_omap34xx())
-		v = OMAP34XX_CLKSTCTRL_DISABLE_AUTO;
-	else
-		BUG();
-
-	cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask,
-			    v << __ffs(clkdm->clktrctrl_mask),
-			    clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL);
+	_omap2_clkdm_set_hwsup(clkdm, 0);
 
 	if (atomic_read(&clkdm->usecount) > 0)
 		_clkdm_del_autodeps(clkdm);
@@ -569,10 +575,14 @@ int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk)
 	v = omap2_clkdm_clktrctrl_read(clkdm);
 
 	if ((cpu_is_omap34xx() && v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ||
-	    (cpu_is_omap24xx() && v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO))
+	    (cpu_is_omap24xx() && v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO)) {
+		/* Disable HW transitions when we are changing deps */
+		_omap2_clkdm_set_hwsup(clkdm, 0);
 		_clkdm_add_autodeps(clkdm);
-	else
+		_omap2_clkdm_set_hwsup(clkdm, 1);
+	} else {
 		omap2_clkdm_wakeup(clkdm);
+	}
 
 	pwrdm_wait_transition(clkdm->pwrdm.ptr);
 	pwrdm_clkdm_state_switch(clkdm);
@@ -623,10 +633,14 @@ int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk)
 	v = omap2_clkdm_clktrctrl_read(clkdm);
 
 	if ((cpu_is_omap34xx() && v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ||
-	    (cpu_is_omap24xx() && v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO))
+	    (cpu_is_omap24xx() && v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO)) {
+		/* Disable HW transitions when we are changing deps */
+		_omap2_clkdm_set_hwsup(clkdm, 0);
 		_clkdm_del_autodeps(clkdm);
-	else
+		_omap2_clkdm_set_hwsup(clkdm, 1);
+	} else {
 		omap2_clkdm_sleep(clkdm);
+	}
 
 	pwrdm_clkdm_state_switch(clkdm);
 
-- 
cgit v1.2.3


From a7f20b2695eb6a00a5464089bacf75b8ed64725e Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Wed, 14 Oct 2009 16:40:37 -0600
Subject: OMAP2xxx clock: set up clockdomain pointer in struct clk

clock24xx.c is missing a omap2_init_clk_clkdm() in its
omap2_clk_init() function.  Among other bad effects, this causes the
OMAP hwmod layer to oops on boot.

Thanks to Carlos Aguiar <carlos.aguiar@indt.org.br> and Stefano
Panella <Stefano.Panella@csr.com> for reporting this bug.  Thanks to Tony
Lindgren <tony@atomide.com> for N800 booting advice.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Carlos Aguiar <carlos.aguiar@indt.org.br>
Cc: Stefano Panella <Stefano.Panella@csr.com>
Cc: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/clock24xx.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index bc5d3ac6661..e2dbedd581e 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -769,6 +769,7 @@ int __init omap2_clk_init(void)
 		if (c->cpu & cpu_mask) {
 			clkdev_add(&c->lk);
 			clk_register(c->lk.clk);
+			omap2_init_clk_clkdm(c->lk.clk);
 		}
 
 	/* Check the MPU rate set by bootloader */
-- 
cgit v1.2.3


From daaeb6c93829806221b2ac533330c64f338ebb89 Mon Sep 17 00:00:00 2001
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
Date: Thu, 15 Oct 2009 15:06:47 +0100
Subject: ARM: 5763/1: ARM: SMP: Fix the BUG with CONFIG_PREEMPT enabled

This patch fixes the BUG: using smp_processor_id() in preemptible
Below is the stripped backtrace.

BUG: using smp_processor_id() in preemptible [00000000] code: init/1
caller is flush_tlb_mm+0x44/0x70
Backtrace:
[<c00225c4>] (dump_backtrace+0x0/0x110) from [<c01713a0>] (dump_stack+0x18/0x1c)
 r7:00000000 r6:c00234f0 r5:00000001 r4:c7828000
[<c0171388>] (dump_stack+0x0/0x1c) from [<c0135364>] (debug_smp_processor_id+0xc0/0xf0)
[<c01352a4>] (debug_smp_processor_id+0x0/0xf0) from [<c00234f0>] (flush_tlb_mm+0x44/0x70)
 r7:00000000 r6:c60b41a0 r5:c60b4154 r4:00000001
[<c00234ac>] (flush_tlb_mm+0x0/0x70) from [<c0039568>] (dup_mm+0x304/0x38c)
 r5:c1f09058 r4:00000000
[<c0039264>] (dup_mm+0x0/0x38c) from [<c0039de4>] (copy_process+0x7b8/0xeb0)
[<c003962c>] (copy_process+0x0/0xeb0) from [<c003a638>] (do_fork+0x15c/0x29c)
[<c003a4dc>] (do_fork+0x0/0x29c) from [<c0021df0>] (sys_clone+0x34/0x3c)
[<c0021dbc>] (sys_clone+0x0/0x3c) from [<c001efa0>] (ret_fast_syscall+0x0/0x2c)

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/tlbflush.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
index a45ab5dd825..c2f1605de35 100644
--- a/arch/arm/include/asm/tlbflush.h
+++ b/arch/arm/include/asm/tlbflush.h
@@ -350,7 +350,7 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
 	if (tlb_flag(TLB_WB))
 		dsb();
 
-	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm))) {
+	if (cpumask_test_cpu(get_cpu(), mm_cpumask(mm))) {
 		if (tlb_flag(TLB_V3_FULL))
 			asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc");
 		if (tlb_flag(TLB_V4_U_FULL))
@@ -360,6 +360,7 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
 		if (tlb_flag(TLB_V4_I_FULL))
 			asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
 	}
+	put_cpu();
 
 	if (tlb_flag(TLB_V6_U_ASID))
 		asm("mcr p15, 0, %0, c8, c7, 2" : : "r" (asid) : "cc");
-- 
cgit v1.2.3


From 0bff2fc319c2a3cb8969c71fdc2f941a15319b2c Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Thu, 15 Oct 2009 10:11:09 +0200
Subject: [ARM] pxa/cm-x300: fix mmc numbering

CM-X300 has libertas on mmc2 and  SD card slot on mmc1.
This patch fixes wrong MMC ports assignment.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/cm-x300.c | 38 +++++++++++++++++++-------------------
 1 file changed, 19 insertions(+), 19 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index aac2cda60e0..102916f1e46 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -43,10 +43,10 @@
 
 #define CM_X300_ETH_PHYS	0x08000010
 
-#define GPIO82_MMC2_IRQ		(82)
-#define GPIO85_MMC2_WP		(85)
+#define GPIO82_MMC_IRQ		(82)
+#define GPIO85_MMC_WP		(85)
 
-#define	CM_X300_MMC2_IRQ	IRQ_GPIO(GPIO82_MMC2_IRQ)
+#define	CM_X300_MMC_IRQ		IRQ_GPIO(GPIO82_MMC_IRQ)
 
 #define GPIO95_RTC_CS		(95)
 #define GPIO96_RTC_WR		(96)
@@ -292,37 +292,37 @@ static inline void cm_x300_init_nand(void) {}
 #endif
 
 #if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
-/* The first MMC slot of CM-X300 is hardwired to Libertas card and has
+static struct pxamci_platform_data cm_x300_mci_platform_data = {
+	.detect_delay		= 20,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO82_MMC_IRQ,
+	.gpio_card_ro		= GPIO85_MMC_WP,
+	.gpio_power		= -1,
+};
+
+/* The second MMC slot of CM-X300 is hardwired to Libertas card and has
    no detection/ro pins */
-static int cm_x300_mci_init(struct device *dev,
-			    irq_handler_t cm_x300_detect_int,
-			    void *data)
+static int cm_x300_mci2_init(struct device *dev,
+			     irq_handler_t cm_x300_detect_int,
+	void *data)
 {
 	return 0;
 }
 
-static void cm_x300_mci_exit(struct device *dev, void *data)
+static void cm_x300_mci2_exit(struct device *dev, void *data)
 {
 }
 
-static struct pxamci_platform_data cm_x300_mci_platform_data = {
+static struct pxamci_platform_data cm_x300_mci2_platform_data = {
 	.detect_delay		= 20,
 	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 			= cm_x300_mci_init,
-	.exit			= cm_x300_mci_exit,
+	.init 			= cm_x300_mci2_init,
+	.exit			= cm_x300_mci2_exit,
 	.gpio_card_detect	= -1,
 	.gpio_card_ro		= -1,
 	.gpio_power		= -1,
 };
 
-static struct pxamci_platform_data cm_x300_mci2_platform_data = {
-	.detect_delay		= 20,
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.gpio_card_detect	= GPIO82_MMC2_IRQ,
-	.gpio_card_ro		= GPIO85_MMC2_WP,
-	.gpio_power		= -1,
-};
-
 static void __init cm_x300_init_mmc(void)
 {
 	pxa_set_mci_info(&cm_x300_mci_platform_data);
-- 
cgit v1.2.3


From f6919eb41127db2e06342efcc2da1eeb4646ec34 Mon Sep 17 00:00:00 2001
From: Stanislav Brabec <utx@penguin.cz>
Date: Fri, 16 Oct 2009 20:50:05 +0200
Subject: [ARM] pxa/spitz: add gpio button support (fixes regression)

Updating desc for lid keys and resending patch with proper comments:
Define Spitz buttons as GPIO keys in a way compatible with the old driver:

On/Off: As Suspend EV_PWR key
Raw values of lid sensors SWA and SWB: As EV_SW switches
SWA: Display Down
SWB: Lid Closed
Recommended user space decoding:
SWA==0 & SWB==0: lid opened (landscape mode)
SWA==1 & SWB==0: invalid (or mechanic race condition)
SWA==0 & SWB==1: lid closed with display up (portrait mode or mechanic
                 race condition while closing to display-less mode)
SWA==1 & SWB==1: lid closed with display down (display-less mode)

AK_INT remote trigger is not mapped as input event. Without complete
remote driver and remote pull-up control it has no useful
interpretation.

Signed-off-by: Stanislav Brabec <utx@penguin.cz>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/spitz.c | 39 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index ee8d6038ce8..82ff5733e4d 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
+#include <linux/gpio_keys.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
 #include <linux/mtd/physmap.h>
@@ -375,6 +376,43 @@ static struct platform_device spitzkbd_device = {
 };
 
 
+static struct gpio_keys_button spitz_gpio_keys[] = {
+	{
+		.type	= EV_PWR,
+		.code	= KEY_SUSPEND,
+		.gpio	= SPITZ_GPIO_ON_KEY,
+		.desc	= "On/Off",
+		.wakeup	= 1,
+	},
+	/* Two buttons detecting the lid state */
+	{
+		.type	= EV_SW,
+		.code	= 0,
+		.gpio	= SPITZ_GPIO_SWA,
+		.desc	= "Display Down",
+	},
+	{
+		.type	= EV_SW,
+		.code	= 1,
+		.gpio	= SPITZ_GPIO_SWB,
+		.desc	= "Lid Closed",
+	},
+};
+
+static struct gpio_keys_platform_data spitz_gpio_keys_platform_data = {
+	.buttons	= spitz_gpio_keys,
+	.nbuttons	= ARRAY_SIZE(spitz_gpio_keys),
+};
+
+static struct platform_device spitz_gpio_keys_device = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &spitz_gpio_keys_platform_data,
+	},
+};
+
+
 /*
  * Spitz LEDs
  */
@@ -689,6 +727,7 @@ static struct platform_device sharpsl_rom_device = {
 static struct platform_device *devices[] __initdata = {
 	&spitzscoop_device,
 	&spitzkbd_device,
+	&spitz_gpio_keys_device,
 	&spitzled_device,
 	&sharpsl_nand_device,
 	&sharpsl_rom_device,
-- 
cgit v1.2.3


From 8c5b0f9a85cd78e98123417a8e9d58857968ff13 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Thu, 15 Oct 2009 22:45:41 +0100
Subject: ARM: 5764/1: bcmring: add oprofile pmu support

add oprofile pmu support for bcmring.

Signed-off-by: Leo Hao Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/oprofile/op_model_v6.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/oprofile/op_model_v6.c b/arch/arm/oprofile/op_model_v6.c
index fe581383d3e..f7d2ec5ee9a 100644
--- a/arch/arm/oprofile/op_model_v6.c
+++ b/arch/arm/oprofile/op_model_v6.c
@@ -33,6 +33,9 @@ static int irqs[] = {
 #ifdef CONFIG_ARCH_OMAP2
 	3,
 #endif
+#ifdef CONFIG_ARCH_BCMRING
+	IRQ_PMUIRQ, /* for BCMRING, ARM PMU interrupt is 43 */
+#endif
 };
 
 static void armv6_pmu_stop(void)
-- 
cgit v1.2.3


From 4726374fb4cc93472b83765ef786d8093e352afa Mon Sep 17 00:00:00 2001
From: Yegor Yefremov <yegorslists@googlemail.com>
Date: Tue, 20 Oct 2009 08:39:41 +0100
Subject: ARM: 5766/1: Fix watchdog enabling for AT91SAM9G45

The macro for the watchdog has been changed from CONFIG_AT91SAM9_WATCHDOG
to CONFIG_AT91SAM9X_WATCHDOG due to AT91CAP9 chips support

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/at91sam9g45_devices.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index d581cff80c4..332b784050b 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -838,7 +838,7 @@ static void __init at91_add_device_rtt(void)
  *  Watchdog
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
 static struct platform_device at91sam9g45_wdt_device = {
 	.name		= "at91_wdt",
 	.id		= -1,
-- 
cgit v1.2.3


From faff8032ec96e575525cf85690c914f75dd77fc5 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Mon, 19 Oct 2009 21:29:28 +0100
Subject: ARM: 5765/1: Updated U300 defconfig

This updates the U300 to use all the drivers merged in during the
2.6.32 merge window.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/configs/u300_defconfig | 94 +++++++++++++++++++++++++++++------------
 1 file changed, 66 insertions(+), 28 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig
index 7d61ae6e75d..953ba0297fc 100644
--- a/arch/arm/configs/u300_defconfig
+++ b/arch/arm/configs/u300_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc3
-# Thu Jul 16 23:36:10 2009
+# Linux kernel version: 2.6.32-rc5
+# Sat Oct 17 23:32:24 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
+CONFIG_HAVE_TCM=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -44,11 +44,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -80,17 +81,15 @@ CONFIG_SHMEM=y
 # CONFIG_AIO is not set
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
@@ -133,6 +132,7 @@ CONFIG_DEFAULT_IOSCHED="deadline"
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
@@ -147,6 +147,7 @@ CONFIG_DEFAULT_IOSCHED="deadline"
 # CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -169,11 +170,13 @@ CONFIG_DEFAULT_IOSCHED="deadline"
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 CONFIG_ARCH_U300=y
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
 
 #
 # ST-Ericsson AB U300/U330/U335/U365 Platform
@@ -195,6 +198,7 @@ CONFIG_MACH_U300_BS335=y
 CONFIG_MACH_U300_DUAL_RAM=y
 CONFIG_U300_DEBUG=y
 # CONFIG_MACH_U300_SEMI_IS_SHARED is not set
+CONFIG_MACH_U300_SPIDUMMY=y
 
 #
 # All the settings below must match the bootloader's settings
@@ -207,7 +211,7 @@ CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WBI=y
@@ -222,6 +226,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
 CONFIG_ARM_VIC=y
 CONFIG_ARM_VIC_NR=2
 CONFIG_COMMON_CLKDEV=y
@@ -245,6 +250,8 @@ CONFIG_VMSPLIT_3G=y
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
@@ -265,6 +272,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
 # CONFIG_UACCESS_WITH_MEMCPY is not set
@@ -313,6 +321,7 @@ CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
 # CONFIG_SUSPEND is not set
 # CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
@@ -351,6 +360,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -391,6 +401,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_FW_LOADER=y
@@ -402,9 +413,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
@@ -453,6 +464,7 @@ CONFIG_MTD_CFI_I2=y
 #
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -520,6 +532,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_NETDEVICES is not set
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -540,12 +553,16 @@ CONFIG_INPUT_EVDEV=y
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_KEYBOARD_MATRIX is not set
 # CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
@@ -597,6 +614,7 @@ CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -629,9 +647,6 @@ CONFIG_I2C_STU300=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -653,16 +668,21 @@ CONFIG_SPI_PL022=y
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
 # CONFIG_POWER_SUPPLY_DEBUG is not set
 # CONFIG_PDA_POWER is not set
 # CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
 # CONFIG_BATTERY_BQ27x00 is not set
 # CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -690,10 +710,24 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TC6387XB is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
 CONFIG_AB3100_CORE=y
+CONFIG_AB3100_OTP=y
 # CONFIG_EZX_PCAP is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_LP3971 is not set
+CONFIG_REGULATOR_AB3100=y
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
 #
@@ -792,9 +826,10 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 #
 CONFIG_MMC_ARMMMCI=y
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 # CONFIG_MMC_SPI is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -820,10 +855,10 @@ CONFIG_LEDS_TRIGGER_BACKLIGHT=y
 #
 # iptables trigger is under Netfilter config (LED target)
 #
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_HCTOSYS is not set
 # CONFIG_RTC_DEBUG is not set
 
 #
@@ -863,6 +898,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -878,27 +914,25 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
+CONFIG_RTC_DRV_AB3100=y
 
 #
 # on-CPU RTC drivers
 #
 # CONFIG_RTC_DRV_PL030 is not set
 # CONFIG_RTC_DRV_PL031 is not set
+CONFIG_RTC_DRV_COH901331=y
 CONFIG_DMADEVICES=y
 
 #
 # DMA Devices
 #
 # CONFIG_AUXDISPLAY is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_LP3971 is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -913,6 +947,7 @@ CONFIG_REGULATOR=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -975,7 +1010,6 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
 
 #
@@ -1033,6 +1067,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1066,11 +1101,13 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
@@ -1121,6 +1158,7 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-- 
cgit v1.2.3


From fb78b11fc2c3743d9a67a226cae8afd06c74d562 Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Wed, 21 Oct 2009 02:17:22 +0100
Subject: ARM: 5767/1: ep93xx: remove ep93xx_init_time() prototype

Remove unused prototype for ep93xx_init_time().  This function
is not defined in the kernel.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/include/mach/platform.h | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index a3ec33fd79d..469fd968d51 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -17,7 +17,6 @@ struct ep93xx_eth_data
 
 void ep93xx_map_io(void);
 void ep93xx_init_irq(void);
-void ep93xx_init_time(unsigned long);
 
 /* EP93xx System Controller software locked register write */
 void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg);
-- 
cgit v1.2.3


From f248dc626e95a2b61fed3631df49aef23f1736b8 Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Wed, 21 Oct 2009 02:21:20 +0100
Subject: ARM: 5768/1: ep93xx: remove dead code in ep93xx_gpio_ab_irq_handler()

Remove unnecessary code in ep93xx_gpio_ab_irq_handler().

The desc calculation for gpio port B was left in when the following
commit was merged.

commit d8aa0251f12546e9bd1e9ee1d9782d6492819a04
Author: Dmitry Baryshkov <dbaryshkov@gmail.com>
Date:   Thu Oct 9 13:36:24 2008 +0100

    [ARM] 5298/1: Drop desc_handle_irq()

It's not needed so remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/core.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index f95dc160c34..b4357c388d2 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -206,7 +206,6 @@ static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
 	for (i = 0; i < 8; i++) {
 		if (status & (1 << i)) {
 			int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i;
-			desc = irq_desc + gpio_irq;
 			generic_handle_irq(gpio_irq);
 		}
 	}
-- 
cgit v1.2.3


From c768e67625688517c23f46b31a46e1f7d2de1c71 Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Wed, 21 Oct 2009 02:27:01 +0100
Subject: ARM: 5769/1: CPU_ARM920T: remove dead Maverick EP9312 URL

Remove the URL listed for Maverick EP9312 since it is not available
and modify the help text appropriately.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/Kconfig | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index e993140edd8..9264d814cd7 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -122,10 +122,7 @@ config CPU_ARM920T
 	select CPU_TLB_V4WBI if MMU
 	help
 	  The ARM920T is licensed to be produced by numerous vendors,
-	  and is used in the Maverick EP9312 and the Samsung S3C2410.
-
-	  More information on the Maverick EP9312 at
-	  <http://linuxdevices.com/products/PD2382866068.html>.
+	  and is used in the Cirrus EP93xx and the Samsung S3C2410.
 
 	  Say Y if you want support for the ARM920T processor.
 	  Otherwise, say N.
-- 
cgit v1.2.3


From 6135434a54719c45fdc6add1ba4965dea89ab069 Mon Sep 17 00:00:00 2001
From: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Date: Thu, 22 Oct 2009 14:43:17 -0700
Subject: omap: Fix omap-keypad by restoring old keypad.h without breaking
 omap2 boards that use matrix_keypad

Only mach-omap2 boards are currently using matrix_keypad. Allow
mach-omap1 boards to use the old style keypad.h without breaking.

Created against linux-2.6.32-rc5.
Compile tested with omap_3430sdp_defconfig and rx51_defconfig.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-3430sdp.c          | 2 +-
 arch/arm/mach-omap2/board-ldp.c              | 2 +-
 arch/arm/mach-omap2/board-omap3evm.c         | 2 +-
 arch/arm/mach-omap2/board-omap3pandora.c     | 2 +-
 arch/arm/mach-omap2/board-rx51-peripherals.c | 2 +-
 arch/arm/mach-omap2/board-rx51.c             | 1 -
 arch/arm/mach-omap2/board-zoom2.c            | 2 +-
 arch/arm/plat-omap/include/mach/keypad.h     | 5 ++++-
 8 files changed, 10 insertions(+), 8 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index efaf053eba8..0acb5560229 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -17,6 +17,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/i2c/twl4030.h>
@@ -38,7 +39,6 @@
 #include <mach/gpmc.h>
 
 #include <mach/control.h>
-#include <mach/keypad.h>
 #include <mach/gpmc-smc91x.h>
 
 #include "sdram-qimonda-hyb18m512160af-6.h"
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index d110a7fdfbd..d57ec2f4d0a 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -16,6 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
 #include <linux/gpio_keys.h>
 #include <linux/workqueue.h>
 #include <linux/err.h>
@@ -41,7 +42,6 @@
 #include <asm/delay.h>
 #include <mach/control.h>
 #include <mach/usb.h>
-#include <mach/keypad.h>
 
 #include "mmc-twl4030.h"
 
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index e4ec0c59121..4c4d7f8dbd7 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -20,6 +20,7 @@
 #include <linux/clk.h>
 #include <linux/gpio.h>
 #include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
 #include <linux/leds.h>
 
 #include <linux/spi/spi.h>
@@ -37,7 +38,6 @@
 #include <mach/usb.h>
 #include <mach/common.h>
 #include <mach/mcspi.h>
-#include <mach/keypad.h>
 
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 7f6bf8772af..5326e0d6159 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -27,6 +27,7 @@
 #include <linux/i2c/twl4030.h>
 #include <linux/leds.h>
 #include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
 #include <linux/gpio_keys.h>
 
 #include <asm/mach-types.h>
@@ -39,7 +40,6 @@
 #include <mach/hardware.h>
 #include <mach/mcspi.h>
 #include <mach/usb.h>
-#include <mach/keypad.h>
 #include <mach/mux.h>
 
 #include "sdram-micron-mt46h32m32lf-6.h"
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 2b0eb1ba5d7..e34d96a825e 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
 #include <linux/spi/spi.h>
 #include <linux/i2c.h>
 #include <linux/i2c/twl4030.h>
@@ -27,7 +28,6 @@
 #include <mach/common.h>
 #include <mach/dma.h>
 #include <mach/gpmc.h>
-#include <mach/keypad.h>
 #include <mach/onenand.h>
 #include <mach/gpmc-smc91x.h>
 
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index f9196c3b1a7..78869a9a1cc 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -26,7 +26,6 @@
 #include <mach/mux.h>
 #include <mach/board.h>
 #include <mach/common.h>
-#include <mach/keypad.h>
 #include <mach/dma.h>
 #include <mach/gpmc.h>
 #include <mach/usb.h>
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index fd3369d5e5c..ea00486a5e5 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -13,6 +13,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
 #include <linux/gpio.h>
 #include <linux/i2c/twl4030.h>
 #include <linux/regulator/machine.h>
@@ -22,7 +23,6 @@
 
 #include <mach/common.h>
 #include <mach/usb.h>
-#include <mach/keypad.h>
 
 #include "mmc-twl4030.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
diff --git a/arch/arm/plat-omap/include/mach/keypad.h b/arch/arm/plat-omap/include/mach/keypad.h
index d91b9be334f..3ae52ccc793 100644
--- a/arch/arm/plat-omap/include/mach/keypad.h
+++ b/arch/arm/plat-omap/include/mach/keypad.h
@@ -10,7 +10,7 @@
 #ifndef ASMARM_ARCH_KEYPAD_H
 #define ASMARM_ARCH_KEYPAD_H
 
-#include <linux/input/matrix_keypad.h>
+#warning: Please update the board to use matrix_keypad.h instead
 
 struct omap_kp_platform_data {
 	int rows;
@@ -37,6 +37,9 @@ struct omap_kp_platform_data {
 
 #define KEY_PERSISTENT		0x00800000
 #define KEYNUM_MASK		0x00EFFFFF
+#define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val))
+#define PERSISTENT_KEY(col, row) (((col) << 28) | ((row) << 24) | \
+						KEY_PERSISTENT)
 
 #endif
 
-- 
cgit v1.2.3


From 9da65a99e5e6a074c586474961dbf560e439df50 Mon Sep 17 00:00:00 2001
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
Date: Thu, 22 Oct 2009 14:46:31 -0700
Subject: omap: SDMA: Fix omap_stop_dma() API for channel linking

OMAP sDMA driver API omap_stop_dma() doesn't really stop the dma when used
in linking scenario.

The DMA channel needs to be disabled before resetting the chain.
Also fix clearing of the OMAP_DMA_ACTIVE status in the linked case.

Cc: Hari n <hari.zoom@gmail.com>
Cc: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Venkatraman S <svenkatr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/dma.c | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 0eb676d7e80..b53125f4129 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -978,6 +978,14 @@ void omap_stop_dma(int lch)
 {
 	u32 l;
 
+	/* Disable all interrupts on the channel */
+	if (cpu_class_is_omap1())
+		dma_write(0, CICR(lch));
+
+	l = dma_read(CCR(lch));
+	l &= ~OMAP_DMA_CCR_EN;
+	dma_write(l, CCR(lch));
+
 	if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
 		int next_lch, cur_lch = lch;
 		char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT];
@@ -995,18 +1003,8 @@ void omap_stop_dma(int lch)
 			next_lch = dma_chan[cur_lch].next_lch;
 			cur_lch = next_lch;
 		} while (next_lch != -1);
-
-		return;
 	}
 
-	/* Disable all interrupts on the channel */
-	if (cpu_class_is_omap1())
-		dma_write(0, CICR(lch));
-
-	l = dma_read(CCR(lch));
-	l &= ~OMAP_DMA_CCR_EN;
-	dma_write(l, CCR(lch));
-
 	dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
 }
 EXPORT_SYMBOL(omap_stop_dma);
-- 
cgit v1.2.3


From dcc730dc9d7614fdaf6bce73d6e8ffe47c8820b1 Mon Sep 17 00:00:00 2001
From: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Date: Thu, 22 Oct 2009 14:46:32 -0700
Subject: omap: iommu: fix wrong condition check for SUPERSECTION

A bit (2 << 0) is set both on SECTION and SUPERSECTION. To identify
SUPERSECTION correctly, other bits should be compared too.

Reported-by: "Srinivas Pulukuru" <srinivas.pulukuru@ti.com>
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/iommu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
index 4b601270730..94584f167a8 100644
--- a/arch/arm/plat-omap/iommu.c
+++ b/arch/arm/plat-omap/iommu.c
@@ -664,7 +664,7 @@ static size_t iopgtable_clear_entry_core(struct iommu *obj, u32 da)
 		nent = 1; /* for the next L1 entry */
 	} else {
 		bytes = IOPGD_SIZE;
-		if (*iopgd & IOPGD_SUPER) {
+		if ((*iopgd & IOPGD_SUPER) == IOPGD_SUPER) {
 			nent *= 16;
 			/* rewind to the 1st entry */
 			iopgd = (u32 *)((u32)iopgd & IOSUPER_MASK);
-- 
cgit v1.2.3


From c33da3a80074094303d643a90ef589330b491270 Mon Sep 17 00:00:00 2001
From: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Date: Thu, 22 Oct 2009 14:47:42 -0700
Subject: omap1: Fix redundant UARTs pin muxing that can break other hardware
 support

Commit 15ac408ee5a509053a765b816e9179515329369f removed enabled_uart
and OMAP_TAG_UART. This works for mach-omap2, but causes issues on
mach-omap1 for some boards as the mach-omap1 serial.c was muxing
pins based on the enabled_uart flag for 15xx.

Fix this by muxing pins in board-*.c files for the 15xx boards for
the uart ports that had enabled_uart flag set before the commit
above.

Tested on Amsdtrad Delta only.

Note that in the future we should add support for powering down
the uarts with a timer like mach-omap2/serial.c does. Otherwise
the enabled uarts will be blocking retention-while-idle.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/board-ams-delta.c |  4 ++++
 arch/arm/mach-omap1/board-generic.c   |  8 ++++++++
 arch/arm/mach-omap1/board-innovator.c | 20 ++++++++++++++++++++
 arch/arm/mach-omap1/board-palmte.c    |  8 ++++++++
 arch/arm/mach-omap1/board-palmtt.c    |  8 ++++++++
 arch/arm/mach-omap1/board-palmz71.c   |  8 ++++++++
 arch/arm/mach-omap1/board-sx1.c       |  8 ++++++++
 arch/arm/mach-omap1/board-voiceblue.c |  8 ++++++++
 arch/arm/mach-omap1/serial.c          | 26 --------------------------
 9 files changed, 72 insertions(+), 26 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 42920f9c1a1..972499e9524 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -219,6 +219,10 @@ static struct platform_device *ams_delta_devices[] __initdata = {
 
 static void __init ams_delta_init(void)
 {
+	/* mux pins for uarts */
+	omap_cfg_reg(UART1_TX);
+	omap_cfg_reg(UART1_RTS);
+
 	iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
 
 	omap_board_config = ams_delta_config;
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index fb47239da72..6c8a41f20e5 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -64,6 +64,14 @@ static void __init omap_generic_init(void)
 {
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap15xx()) {
+		/* mux pins for uarts */
+		omap_cfg_reg(UART1_TX);
+		omap_cfg_reg(UART1_RTS);
+		omap_cfg_reg(UART2_TX);
+		omap_cfg_reg(UART2_RTS);
+		omap_cfg_reg(UART3_TX);
+		omap_cfg_reg(UART3_RX);
+
 		omap_usb_init(&generic1510_usb_config);
 	}
 #endif
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index cc2abbb2d0f..cd6c3951482 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -376,6 +376,26 @@ static void __init innovator_init(void)
 {
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
+		unsigned char reg;
+
+		/* mux pins for uarts */
+		omap_cfg_reg(UART1_TX);
+		omap_cfg_reg(UART1_RTS);
+		omap_cfg_reg(UART2_TX);
+		omap_cfg_reg(UART2_RTS);
+		omap_cfg_reg(UART3_TX);
+		omap_cfg_reg(UART3_RX);
+
+		reg = fpga_read(OMAP1510_FPGA_POWER);
+		reg |= OMAP1510_FPGA_PCR_COM1_EN;
+		fpga_write(reg, OMAP1510_FPGA_POWER);
+		udelay(10);
+
+		reg = fpga_read(OMAP1510_FPGA_POWER);
+		reg |= OMAP1510_FPGA_PCR_COM2_EN;
+		fpga_write(reg, OMAP1510_FPGA_POWER);
+		udelay(10);
+
 		platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
 		spi_register_board_info(innovator1510_boardinfo,
 				ARRAY_SIZE(innovator1510_boardinfo));
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 90dd0431b0d..4de258420f3 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -342,6 +342,14 @@ static void __init palmte_misc_gpio_setup(void)
 
 static void __init omap_palmte_init(void)
 {
+	/* mux pins for uarts */
+	omap_cfg_reg(UART1_TX);
+	omap_cfg_reg(UART1_RTS);
+	omap_cfg_reg(UART2_TX);
+	omap_cfg_reg(UART2_RTS);
+	omap_cfg_reg(UART3_TX);
+	omap_cfg_reg(UART3_RX);
+
 	omap_board_config = palmte_config;
 	omap_board_config_size = ARRAY_SIZE(palmte_config);
 
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 8256139891f..d972cf941b7 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -289,6 +289,14 @@ static void __init omap_mpu_wdt_mode(int mode) {
 
 static void __init omap_palmtt_init(void)
 {
+	/* mux pins for uarts */
+	omap_cfg_reg(UART1_TX);
+	omap_cfg_reg(UART1_RTS);
+	omap_cfg_reg(UART2_TX);
+	omap_cfg_reg(UART2_RTS);
+	omap_cfg_reg(UART3_TX);
+	omap_cfg_reg(UART3_RX);
+
 	omap_mpu_wdt_mode(0);
 
 	omap_board_config = palmtt_config;
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 81b6bde1c5a..986bd4df0e9 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -307,6 +307,14 @@ palmz71_gpio_setup(int early)
 static void __init
 omap_palmz71_init(void)
 {
+	/* mux pins for uarts */
+	omap_cfg_reg(UART1_TX);
+	omap_cfg_reg(UART1_RTS);
+	omap_cfg_reg(UART2_TX);
+	omap_cfg_reg(UART2_RTS);
+	omap_cfg_reg(UART3_TX);
+	omap_cfg_reg(UART3_RX);
+
 	palmz71_gpio_setup(1);
 	omap_mpu_wdt_mode(0);
 
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 02c85ca2e1d..056ae64e0f5 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -377,6 +377,14 @@ static struct omap_board_config_kernel sx1_config[] __initdata = {
 
 static void __init omap_sx1_init(void)
 {
+	/* mux pins for uarts */
+	omap_cfg_reg(UART1_TX);
+	omap_cfg_reg(UART1_RTS);
+	omap_cfg_reg(UART2_TX);
+	omap_cfg_reg(UART2_RTS);
+	omap_cfg_reg(UART3_TX);
+	omap_cfg_reg(UART3_RX);
+
 	platform_add_devices(sx1_devices, ARRAY_SIZE(sx1_devices));
 
 	omap_board_config = sx1_config;
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index c06e7a55347..07b07522d5b 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -152,6 +152,14 @@ static void __init voiceblue_init_irq(void)
 
 static void __init voiceblue_init(void)
 {
+	/* mux pins for uarts */
+	omap_cfg_reg(UART1_TX);
+	omap_cfg_reg(UART1_RTS);
+	omap_cfg_reg(UART2_TX);
+	omap_cfg_reg(UART2_RTS);
+	omap_cfg_reg(UART3_TX);
+	omap_cfg_reg(UART3_RX);
+
 	/* Watchdog */
 	gpio_request(0, "Watchdog");
 	/* smc91x reset */
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index d496e50fec4..d23979bc0fd 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -131,8 +131,6 @@ void __init omap_serial_init(void)
 	}
 
 	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
-		unsigned char reg;
-
 		switch (i) {
 		case 0:
 			uart1_ck = clk_get(NULL, "uart1_ck");
@@ -143,16 +141,6 @@ void __init omap_serial_init(void)
 				if (cpu_is_omap15xx())
 					clk_set_rate(uart1_ck, 12000000);
 			}
-			if (cpu_is_omap15xx()) {
-				omap_cfg_reg(UART1_TX);
-				omap_cfg_reg(UART1_RTS);
-				if (machine_is_omap_innovator()) {
-					reg = fpga_read(OMAP1510_FPGA_POWER);
-					reg |= OMAP1510_FPGA_PCR_COM1_EN;
-					fpga_write(reg, OMAP1510_FPGA_POWER);
-					udelay(10);
-				}
-			}
 			break;
 		case 1:
 			uart2_ck = clk_get(NULL, "uart2_ck");
@@ -165,16 +153,6 @@ void __init omap_serial_init(void)
 				else
 					clk_set_rate(uart2_ck, 48000000);
 			}
-			if (cpu_is_omap15xx()) {
-				omap_cfg_reg(UART2_TX);
-				omap_cfg_reg(UART2_RTS);
-				if (machine_is_omap_innovator()) {
-					reg = fpga_read(OMAP1510_FPGA_POWER);
-					reg |= OMAP1510_FPGA_PCR_COM2_EN;
-					fpga_write(reg, OMAP1510_FPGA_POWER);
-					udelay(10);
-				}
-			}
 			break;
 		case 2:
 			uart3_ck = clk_get(NULL, "uart3_ck");
@@ -185,10 +163,6 @@ void __init omap_serial_init(void)
 				if (cpu_is_omap15xx())
 					clk_set_rate(uart3_ck, 12000000);
 			}
-			if (cpu_is_omap15xx()) {
-				omap_cfg_reg(UART3_TX);
-				omap_cfg_reg(UART3_RX);
-			}
 			break;
 		}
 		omap_serial_reset(&serial_platform_data[i]);
-- 
cgit v1.2.3


From b3dba0b81e9612c385c4fb55d546e0104661168d Mon Sep 17 00:00:00 2001
From: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Date: Thu, 22 Oct 2009 14:47:42 -0700
Subject: omap1: Fix DSP public peripherals support for ams-delta

DSP public peripherals used to work on OMAP1510 based (or all OMAP1 class?)
machines as long as old dspgateway code were present in the l-o tree. For
several months it is no longer included, breaking support for McBSP1 based
audio on Amstrad Delta, for example.

This patch, derived from the old dspgateway code, corrects the problem for the
board by simply taking the DSP out of reset state, I guess. That way, things
should not break when a new dsp code is added to the tree, and the change can
be reverted then.

If there are any reports on McBSP1 or other DSP public peripherals not working
for other OMAP1 machines (I've not heard of any for now), I can prepare a more
general patch providing an extra include file with a helper function defined.

Created and tested against linux-2.6.32-rc5

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/board-ams-delta.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 972499e9524..8ad5cc3e83e 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -235,6 +235,8 @@ static void __init ams_delta_init(void)
 
 	omap_usb_init(&ams_delta_usb_config);
 	platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
+
+	omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1);
 }
 
 static struct plat_serial8250_port ams_delta_modem_ports[] = {
-- 
cgit v1.2.3


From d2fbf3451d338ac68c8a555207183647074f78a0 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Thu, 22 Oct 2009 14:48:13 -0700
Subject: omap2: Fix detection of n8x0

Otherwise the machine_is_nokia_n8*() does not work.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/Kconfig | 12 ++++++++++++
 1 file changed, 12 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 75b1c7efae7..aad194f61a3 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -73,9 +73,21 @@ config MACH_OMAP_3430SDP
 	bool "OMAP 3430 SDP board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
 
+config MACH_NOKIA_N800
+       bool
+
+config MACH_NOKIA_N810
+       bool
+
+config MACH_NOKIA_N810_WIMAX
+       bool
+
 config MACH_NOKIA_N8X0
 	bool "Nokia N800/N810"
 	depends on ARCH_OMAP2420
+	select MACH_NOKIA_N800
+	select MACH_NOKIA_N810
+	select MACH_NOKIA_N810_WIMAX
 
 config MACH_NOKIA_RX51
 	bool "Nokia RX-51 board"
-- 
cgit v1.2.3


From 60dbd8c95fe21955391bbaf0b66ac443742a3dd4 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Thu, 22 Oct 2009 14:48:13 -0700
Subject: omap2: Fix console serial port number for n8x0

With the recent changes omap serial ports match the physical
numbering like they should. Fix the kernel CMDLINE accordingly
so console works.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/configs/n8x0_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/configs/n8x0_defconfig b/arch/arm/configs/n8x0_defconfig
index 8da75dede52..264f52b5c52 100644
--- a/arch/arm/configs/n8x0_defconfig
+++ b/arch/arm/configs/n8x0_defconfig
@@ -304,7 +304,7 @@ CONFIG_ALIGNMENT_TRAP=y
 CONFIG_ZBOOT_ROM_TEXT=0x10C08000
 CONFIG_ZBOOT_ROM_BSS=0x10200000
 # CONFIG_ZBOOT_ROM is not set
-CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS0,115200n8"
+CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS2,115200n8"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
-- 
cgit v1.2.3


From b427f92f8cfca2787c18a77bef15cc8b13341774 Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Thu, 22 Oct 2009 14:48:13 -0700
Subject: omap3: PM: enable UART3 module wakeups

UART3 is in the PER powerdomain.  If PER goes idle/inactive
independently of CORE, for UART3 to wakeup it must have its wakeup
enable bits setup in PM_WKEN_PER.  This patch enables these bits.

The reason it works when PER and CORE work together is because when
CORE goes inactive/retention, the IOPAD wakeups are enabled and
trigger UART3 wakeup.

Without this patch, when the UART inactivity timer fires for UART3,
its clocks are disabled and it's unable to wakeup so will be unusable
until PER is awoken by another source.

Another way of testing is by keeping CORE on during suspend but
allowing PER to hit retention

  # echo 3 > /debug/pm_debug/core_pwrdm/suspend

then enter suspend

  # echo mem > /sys/power/state

Without this patch, UART3 will be unable to wakeup the system.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/pm34xx.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 378c2f61835..89463190923 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -639,14 +639,15 @@ static void __init prcm_setup_regs(void)
 	prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN,
 			  OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
 
-	/* Enable GPIO wakeups in PER */
+	/* Enable wakeups in PER */
 	prm_write_mod_reg(OMAP3430_EN_GPIO2 | OMAP3430_EN_GPIO3 |
 			  OMAP3430_EN_GPIO4 | OMAP3430_EN_GPIO5 |
-			  OMAP3430_EN_GPIO6, OMAP3430_PER_MOD, PM_WKEN);
+			  OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3,
+			  OMAP3430_PER_MOD, PM_WKEN);
 	/* and allow them to wake up MPU */
 	prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2 | OMAP3430_EN_GPIO3 |
 			  OMAP3430_GRPSEL_GPIO4 | OMAP3430_EN_GPIO5 |
-			  OMAP3430_GRPSEL_GPIO6,
+			  OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3,
 			  OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
 
 	/* Don't attach IVA interrupts */
-- 
cgit v1.2.3


From 5b7815b5ca2c7b44ebaaa33c66a3068d6de27bce Mon Sep 17 00:00:00 2001
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
Date: Thu, 22 Oct 2009 14:48:14 -0700
Subject: omap4: Allow omap_serial_early_init() for OMAP4430 board

This patch enables omap_serial_early_init() function for OMAP4430
SDP. Without this the bootup would throw oops in omap_serial_init().

Note that the ifndef CONFIG_ARCH_OMAP4 is split into two sections
to enable omap_serial_early_init(). This ifndef cannot be removed
until omap4 clock framework is implemented.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-By: Tony Lindgren <tony@atomide.com>
Reviewed-By: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-4430sdp.c | 4 ++--
 arch/arm/mach-omap2/io.c            | 2 ++
 2 files changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index eb37c40ea83..609a5a4a7e2 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -58,6 +58,8 @@ static void __init gic_init_irq(void)
 
 static void __init omap_4430sdp_init_irq(void)
 {
+	omap_board_config = sdp4430_config;
+	omap_board_config_size = ARRAY_SIZE(sdp4430_config);
 	omap2_init_common_hw(NULL, NULL);
 #ifdef CONFIG_OMAP_32K_TIMER
 	omap2_gp_clockevent_set_gptimer(1);
@@ -70,8 +72,6 @@ static void __init omap_4430sdp_init_irq(void)
 static void __init omap_4430sdp_init(void)
 {
 	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
-	omap_board_config = sdp4430_config;
-	omap_board_config_size = ARRAY_SIZE(sdp4430_config);
 	omap_serial_init();
 }
 
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index e3a3bad1d84..56be87d13ed 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -302,7 +302,9 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 	pwrdm_init(powerdomains_omap);
 	clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
 	omap2_clk_init();
+#endif
 	omap_serial_early_init();
+#ifndef CONFIG_ARCH_OMAP4
 	omap_hwmod_late_init();
 	omap_pm_if_init();
 	omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
-- 
cgit v1.2.3


From 54341c9b741dc5646842fe47eccfc3b506c6dafa Mon Sep 17 00:00:00 2001
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
Date: Thu, 22 Oct 2009 14:48:14 -0700
Subject: omap4: Fix UART4 platform data on omap4

This patch removes the unnecessary UART4 platform which is under
data is wrong because of this

There is a separate platform structure for UART4

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-By: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/serial.c | 10 ----------
 1 file changed, 10 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index ae2186892c8..54dfeb5d566 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -109,16 +109,6 @@ static struct plat_serial8250_port serial_platform_data2[] = {
 		.regshift	= 2,
 		.uartclk	= OMAP24XX_BASE_BAUD * 16,
 	}, {
-#ifdef CONFIG_ARCH_OMAP4
-		.membase	= OMAP2_IO_ADDRESS(OMAP_UART4_BASE),
-		.mapbase	= OMAP_UART4_BASE,
-		.irq		= 70,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= OMAP24XX_BASE_BAUD * 16,
-	}, {
-#endif
 		.flags		= 0
 	}
 };
-- 
cgit v1.2.3


From ab72b00734ae4d0b5ff273a0f6c7abeaa3713c76 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun, 25 Oct 2009 15:39:37 +0000
Subject: ARM: Fix signal restart issues with NX and OABI compat

The signal restarting code was placed on the user stack when OABI
compatibility is enabled.  Unfortunately, with an EABI NX executable,
this results in an attempt to run code from the non-executable stack,
which segfaults the application.

Fix this by placing the code in the vectors page, along side the
signal return code, and directing the application to that code.

Reported-by: saeed bishara <saeed.bishara@gmail.com>
Tested-by: saeed bishara <saeed.bishara@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/signal.c | 41 +++++++++++++++++------------------------
 arch/arm/kernel/signal.h |  4 +++-
 arch/arm/kernel/traps.c  |  4 +++-
 3 files changed, 23 insertions(+), 26 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 1423a341978..2a573d4fea2 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -1,7 +1,7 @@
 /*
  *  linux/arch/arm/kernel/signal.c
  *
- *  Copyright (C) 1995-2002 Russell King
+ *  Copyright (C) 1995-2009 Russell King
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -29,6 +29,7 @@
  */
 #define SWI_SYS_SIGRETURN	(0xef000000|(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE))
 #define SWI_SYS_RT_SIGRETURN	(0xef000000|(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE))
+#define SWI_SYS_RESTART		(0xef000000|__NR_restart_syscall|__NR_OABI_SYSCALL_BASE)
 
 /*
  * With EABI, the syscall number has to be loaded into r7.
@@ -48,6 +49,18 @@ const unsigned long sigreturn_codes[7] = {
 	MOV_R7_NR_RT_SIGRETURN, SWI_SYS_RT_SIGRETURN, SWI_THUMB_RT_SIGRETURN,
 };
 
+/*
+ * Either we support OABI only, or we have EABI with the OABI
+ * compat layer enabled.  In the later case we don't know if
+ * user space is EABI or not, and if not we must not clobber r7.
+ * Always using the OABI syscall solves that issue and works for
+ * all those cases.
+ */
+const unsigned long syscall_restart_code[2] = {
+	SWI_SYS_RESTART,	/* swi	__NR_restart_syscall */
+	0xe49df004,		/* ldr	pc, [sp], #4 */
+};
+
 /*
  * atomically swap in the new signal mask, and wait for a signal.
  */
@@ -645,32 +658,12 @@ static void do_signal(struct pt_regs *regs, int syscall)
 				regs->ARM_pc -= 4;
 #else
 				u32 __user *usp;
-				u32 swival = __NR_restart_syscall;
 
-				regs->ARM_sp -= 12;
+				regs->ARM_sp -= 4;
 				usp = (u32 __user *)regs->ARM_sp;
 
-				/*
-				 * Either we supports OABI only, or we have
-				 * EABI with the OABI compat layer enabled.
-				 * In the later case we don't know if user
-				 * space is EABI or not, and if not we must
-				 * not clobber r7.  Always using the OABI
-				 * syscall solves that issue and works for
-				 * all those cases.
-				 */
-				swival = swival - __NR_SYSCALL_BASE + __NR_OABI_SYSCALL_BASE;
-
-				put_user(regs->ARM_pc, &usp[0]);
-				/* swi __NR_restart_syscall */
-				put_user(0xef000000 | swival, &usp[1]);
-				/* ldr	pc, [sp], #12 */
-				put_user(0xe49df00c, &usp[2]);
-
-				flush_icache_range((unsigned long)usp,
-						   (unsigned long)(usp + 3));
-
-				regs->ARM_pc = regs->ARM_sp + 4;
+				put_user(regs->ARM_pc, usp);
+				regs->ARM_pc = KERN_RESTART_CODE;
 #endif
 			}
 		}
diff --git a/arch/arm/kernel/signal.h b/arch/arm/kernel/signal.h
index 27beece1550..6fcfe8398aa 100644
--- a/arch/arm/kernel/signal.h
+++ b/arch/arm/kernel/signal.h
@@ -1,12 +1,14 @@
 /*
  *  linux/arch/arm/kernel/signal.h
  *
- *  Copyright (C) 2005 Russell King.
+ *  Copyright (C) 2005-2009 Russell King.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
 #define KERN_SIGRETURN_CODE	(CONFIG_VECTORS_BASE + 0x00000500)
+#define KERN_RESTART_CODE	(KERN_SIGRETURN_CODE + sizeof(sigreturn_codes))
 
 extern const unsigned long sigreturn_codes[7];
+extern const unsigned long syscall_restart_code[2];
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index f838f36eb70..95718a6b50a 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -1,7 +1,7 @@
 /*
  *  linux/arch/arm/kernel/traps.c
  *
- *  Copyright (C) 1995-2002 Russell King
+ *  Copyright (C) 1995-2009 Russell King
  *  Fragments that appear the same as linux/arch/i386/kernel/traps.c (C) Linus Torvalds
  *
  * This program is free software; you can redistribute it and/or modify
@@ -751,6 +751,8 @@ void __init early_trap_init(void)
 	 */
 	memcpy((void *)KERN_SIGRETURN_CODE, sigreturn_codes,
 	       sizeof(sigreturn_codes));
+	memcpy((void *)KERN_RESTART_CODE, syscall_restart_code,
+	       sizeof(syscall_restart_code));
 
 	flush_icache_range(vectors, vectors + PAGE_SIZE);
 	modify_domain(DOMAIN_USER, DOMAIN_CLIENT);
-- 
cgit v1.2.3


From ce63e6bd0ac7eca242562ee07f518bacc8eaa5ce Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun, 25 Oct 2009 22:42:38 +0000
Subject: ARM: integrator: allow Integrator to be built with highmem

This fixes Integrator builds with highmem enabled; we need to
translate from 'struct page' to a DMA address, and this is not
possible without __pfn_to_bus().

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-integrator/include/mach/memory.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-integrator/include/mach/memory.h b/arch/arm/mach-integrator/include/mach/memory.h
index 2b2e7a11072..4891828454f 100644
--- a/arch/arm/mach-integrator/include/mach/memory.h
+++ b/arch/arm/mach-integrator/include/mach/memory.h
@@ -28,5 +28,6 @@
 #define BUS_OFFSET	UL(0x80000000)
 #define __virt_to_bus(x)	((x) - PAGE_OFFSET + BUS_OFFSET)
 #define __bus_to_virt(x)	((x) - BUS_OFFSET + PAGE_OFFSET)
+#define __pfn_to_bus(x)		(((x) << PAGE_SHIFT) + BUS_OFFSET)
 
 #endif
-- 
cgit v1.2.3


From c06e004c72aa0d1acbc239fb995aa3d823543a8a Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun, 25 Oct 2009 22:36:10 +0000
Subject: ARM: Use GFP_DMA only for masks _less_ than 32-bit

We were using GFP_DMA for masks other than 0xffffffff, which is
wrong when some masks are initialized to 0xffffffffffffffff.
This caused such masks to obtain memory from the precious DMA
pool.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/dma-mapping.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index b30925fcbcd..b9590a7085c 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -205,7 +205,7 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
 
 	order = get_order(size);
 
-	if (mask != 0xffffffff)
+	if (mask < 0xffffffffULL)
 		gfp |= GFP_DMA;
 
 	page = alloc_pages(gfp, order);
@@ -289,7 +289,7 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
 	if (!mask)
 		goto error;
 
-	if (mask != 0xffffffff)
+	if (mask < 0xffffffffULL)
 		gfp |= GFP_DMA;
 	virt = kmalloc(size, gfp);
 	if (!virt)
-- 
cgit v1.2.3


From e73486b8c9d8d649dd080eb1b810e5b0c11a955a Mon Sep 17 00:00:00 2001
From: Kukjin Kim <kgene.kim@samsung.com>
Date: Wed, 23 Sep 2009 12:59:07 +0900
Subject: ARM: S3C64XX: Fix S3C64XX_CLKDIV0_ARM_MASK value

Fix the values of S3C6400_CLKDIV0_ARM_MASK and S3C6410_CLKDIV0_ARM_MASK.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c64xx/include/plat/regs-clock.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
index a8777a755df..ff46e7fa957 100644
--- a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
+++ b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
@@ -51,8 +51,8 @@
 #define S3C6400_CLKDIV0_HCLK_SHIFT	(8)
 #define S3C6400_CLKDIV0_MPLL_MASK	(0x1 << 4)
 #define S3C6400_CLKDIV0_MPLL_SHIFT	(4)
-#define S3C6400_CLKDIV0_ARM_MASK	(0x3 << 0)
-#define S3C6410_CLKDIV0_ARM_MASK	(0x7 << 0)
+#define S3C6400_CLKDIV0_ARM_MASK	(0x7 << 0)
+#define S3C6410_CLKDIV0_ARM_MASK	(0xf << 0)
 #define S3C6400_CLKDIV0_ARM_SHIFT	(0)
 
 /* CLKDIV1 */
-- 
cgit v1.2.3


From e179ac0f4ea4f1e989fa754bada366f88fd81d27 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Wed, 21 Oct 2009 18:17:58 +0100
Subject: ARM: S3C64XX: Set rate of crystal mux

The current code assumes that the external clock mux will be set to
the crystal. Set this up explicitly within the clock API.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c64xx/s3c6400-clock.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
index 9745852261e..6ffa21eb1b9 100644
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c
@@ -677,6 +677,9 @@ void __init_or_cpufreq s3c6400_setup_clocks(void)
 
 	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
 
+	/* For now assume the mux always selects the crystal */
+	clk_ext_xtal_mux.parent = xtal_clk;
+
 	epll = s3c6400_get_epll(xtal);
 	mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON));
 	apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON));
-- 
cgit v1.2.3


From e3d8024891dbfec6cf36c9b76177650f48118462 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Tue, 22 Sep 2009 16:48:56 +0100
Subject: ARM: S3C: Add info for supporting circular DMA buffers

The S3C64XX DMA implementation will work a lot better with the ability
to enqueue circular buffers as the hardware can do it's own linked-list
management.

Add a function s3c_dma_has_circular() to show that the system can do this
and a flag for the channel.

Update the s3c24xx/s3c64xx I2S DMA code to deal with this.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Acked-by: Mark Brown <broonie@@opensource.wolfsonmicro.com>
---
 arch/arm/mach-s3c2410/include/mach/dma.h | 7 +++++++
 arch/arm/mach-s3c6400/include/mach/dma.h | 5 +++++
 2 files changed, 12 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
index c3a2629e0de..92e2687009e 100644
--- a/arch/arm/mach-s3c2410/include/mach/dma.h
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -110,6 +110,8 @@ enum s3c2410_dma_loadst {
 					    * waiting for reloads */
 #define S3C2410_DMAF_AUTOSTART    (1<<1)   /* auto-start if buffer queued */
 
+#define S3C2410_DMAF_CIRCULAR	(1 << 2)	/* no circular dma support */
+
 /* dma buffer */
 
 struct s3c2410_dma_buf;
@@ -194,4 +196,9 @@ struct s3c2410_dma_chan {
 
 typedef unsigned long dma_device_t;
 
+static inline bool s3c_dma_has_circular(void)
+{
+	return false;
+}
+
 #endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/dma.h b/arch/arm/mach-s3c6400/include/mach/dma.h
index 1067619f0ba..004edab2395 100644
--- a/arch/arm/mach-s3c6400/include/mach/dma.h
+++ b/arch/arm/mach-s3c6400/include/mach/dma.h
@@ -68,6 +68,11 @@ static __inline__ int s3c_dma_has_circular(void)
 
 #define S3C2410_DMAF_CIRCULAR		(1 << 0)
 
+static inline bool s3c_dma_has_circular(void)
+{
+	return false;
+}
+
 #include <plat/dma.h>
 
 #endif /* __ASM_ARCH_IRQ_H */
-- 
cgit v1.2.3


From b4719cd62707ca6f1a4d55b89066a7b9acc72347 Mon Sep 17 00:00:00 2001
From: Ramax Lo <ramaxlo@gmail.com>
Date: Tue, 22 Sep 2009 00:04:16 +0800
Subject: ARM: S3C24XX: Define a macro to avoid compilation error
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Define a macro to avoid the following error during kernel build process
for platforms other than s3c2410:

arch/arm/plat-s3c24xx/cpu.c:84: error: ‘s3c2410a_init’ undeclared here (not in a function)

Signed-off-by: Ramax Lo <ramaxlo@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/include/plat/s3c2410.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
index b6deeef8f66..82ab4aad1bb 100644
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
@@ -27,6 +27,7 @@ extern void s3c2410_init_clocks(int xtal);
 #define s3c2410_init_uarts NULL
 #define s3c2410_map_io NULL
 #define s3c2410_init NULL
+#define s3c2410a_init NULL
 #endif
 
 extern int s3c2410_baseclk_add(void);
-- 
cgit v1.2.3


From f5fb9b1a15285fde54c6b70cf35d328333e5b519 Mon Sep 17 00:00:00 2001
From: Harald Welte <laforge@gnumonks.org>
Date: Tue, 22 Sep 2009 21:40:39 +0100
Subject: ARM: S3C24XX: Introduce S3C2442B CPU

Add the S3C2442B CPU ID to aid support the Openmoko GTA02 / Freerunner.

Signed-off-by: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Andy Green <andy@warmcat.com>
Signed-off-by: Nelson Castillo <arhuaco@freaks-unidos.net>
[ben-linux@fluff.org: edit description for clarity and S3C2442B as uppercase]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/cpu.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 5447e60f393..4af9dd94879 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -61,6 +61,7 @@ static const char name_s3c2410[]  = "S3C2410";
 static const char name_s3c2412[]  = "S3C2412";
 static const char name_s3c2440[]  = "S3C2440";
 static const char name_s3c2442[]  = "S3C2442";
+static const char name_s3c2442b[]  = "S3C2442B";
 static const char name_s3c2443[]  = "S3C2443";
 static const char name_s3c2410a[] = "S3C2410A";
 static const char name_s3c2440a[] = "S3C2440A";
@@ -111,6 +112,15 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.init		= s3c2442_init,
 		.name		= name_s3c2442
 	},
+	{
+		.idcode		= 0x32440aab,
+		.idmask		= 0xffffffff,
+		.map_io		= s3c244x_map_io,
+		.init_clocks	= s3c244x_init_clocks,
+		.init_uarts	= s3c244x_init_uarts,
+		.init		= s3c2442_init,
+		.name		= name_s3c2442b
+	},
 	{
 		.idcode		= 0x32412001,
 		.idmask		= 0xffffffff,
-- 
cgit v1.2.3


From 2e31de6511a47738974d6b48fdc60c4f82f80d24 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Wed, 14 Oct 2009 10:13:22 +0100
Subject: ARM: S3C2410: Fix link if CONFIG_S3C2410_IOTIMING is not set

Fix the link errors if cpu-frequency support is enabled on s3c2410 systems
but there is no CONFIG_S3C2410_IOTIMING set. Fix this by ensuring the
relevant symbols are defined NULL if the code is not being built in.

Fixes the following error:
arch/arm/mach-s3c2410/built-in.o: undefined reference to `s3c2410_iotiming_get'
arch/arm/mach-s3c2410/built-in.o: undefined reference to `s3c2410_iotiming_set'
arch/arm/mach-s3c2410/built-in.o: undefined reference to `s3c2410_iotiming_calc'

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
index efeb025affc..c776120b99e 100644
--- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
@@ -222,7 +222,9 @@ extern struct clk *s3c_cpufreq_clk_get(struct device *, const char *);
 /* S3C2410 and compatible exported functions */
 
 extern void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg);
+extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg);
 
+#ifdef CONFIG_S3C2410_IOTIMING
 extern int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
 				 struct s3c_iotimings *iot);
 
@@ -231,8 +233,11 @@ extern int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
 
 extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
 				 struct s3c_iotimings *iot);
-
-extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg);
+#else
+#define s3c2410_iotiming_calc NULL
+#define s3c2410_iotiming_get NULL
+#define s3c2410_iotiming_set NULL
+#endif /* CONFIG_S3C2410_IOTIMING */
 
 /* S3C2412 compatible routines */
 
-- 
cgit v1.2.3


From d3bf3956c75b38def079fb6db40b5cf3f1466a93 Mon Sep 17 00:00:00 2001
From: Ryan Mallon <ryan@bluewatersys.com>
Date: Wed, 14 Oct 2009 09:18:30 +1300
Subject: ARM: S3C: Fix adc function exports

Fix the export of s3c_adc_read.

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
[ben-linux@fluff.org: remove unexport of s3c_adc_start, needed for ts]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/adc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
index 4d36b784fb8..df47322492d 100644
--- a/arch/arm/plat-s3c24xx/adc.c
+++ b/arch/arm/plat-s3c24xx/adc.c
@@ -189,7 +189,7 @@ int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch)
 err:
 	return ret;
 }
-EXPORT_SYMBOL_GPL(s3c_adc_convert);
+EXPORT_SYMBOL_GPL(s3c_adc_read);
 
 static void s3c_adc_default_select(struct s3c_adc_client *client,
 				   unsigned select)
-- 
cgit v1.2.3


From 60e5c1b5ecd99e06d3133a2a20d58d3c2b9968ac Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Sat, 17 Oct 2009 08:42:49 +0200
Subject: ARM: S3C24XX: arch/arm/plat-s3c24xx: Move dereference after NULL test

If the NULL test on buf is needed, then the dereference should be after the
NULL test.

A simplified version of the semantic match that detects this problem is as
follows (http://coccinelle.lip6.fr/):

// <smpl>
@match exists@
expression x, E;
identifier fld;
@@

* x->fld
  ... when != \(x = E\|&x\)
* x == NULL
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/dma.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 196b1912365..f046f8c5108 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -208,14 +208,14 @@ s3c2410_dma_loadbuffer(struct s3c2410_dma_chan *chan,
 {
 	unsigned long reload;
 
-	pr_debug("s3c2410_chan_loadbuffer: loading buff %p (0x%08lx,0x%06x)\n",
-		 buf, (unsigned long)buf->data, buf->size);
-
 	if (buf == NULL) {
 		dmawarn("buffer is NULL\n");
 		return -EINVAL;
 	}
 
+	pr_debug("s3c2410_chan_loadbuffer: loading buff %p (0x%08lx,0x%06x)\n",
+		 buf, (unsigned long)buf->data, buf->size);
+
 	/* check the state of the channel before we do anything */
 
 	if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
-- 
cgit v1.2.3


From 0bfb34f3a168ee598164803ab3147dd41fc3f843 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Mon, 26 Oct 2009 20:37:21 +0000
Subject: ARM: S3C2440: mini2440: Fix missing CONFIG_S3C_DEV_USB_HOST

Fix missing select of S3C_DEV_USB_HOST when building for mini2440
only. Fixes the following error:

built-in.o: undefined reference to `s3c_device_usb`

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2440/Kconfig | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index d7bba919a77..a8b69d77571 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -103,6 +103,7 @@ config MACH_MINI2440
 	select LEDS_TRIGGER_BACKLIGHT
 	select SND_S3C24XX_SOC_S3C24XX_UDA134X
 	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
 	  available via various sources. It can come with a 3.5" or 7" touch LCD.
-- 
cgit v1.2.3


From 365854af7e393591d980998dec350b6d9ee695ee Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Mon, 26 Oct 2009 21:17:15 +0000
Subject: ARM: S3C24XX: Fix warnings in arch/arm/plat-s3c24xx/gpio.c

Fix the following warnings from sparse in arch/arm/plat-s3c24xx/gpio.
due to the missing include of <mach/gpio-fns.h>

gpio.c:36:6: warning: symbol 's3c2410_gpio_cfgpin' was not declared. Should it be static?
gpio.c:84:14: warning: symbol 's3c2410_gpio_getcfg' was not declared. Should it be static?
gpio.c:103:6: warning: symbol 's3c2410_gpio_pullup' was not declared. Should it be static?
gpio.c:125:5: warning: symbol 's3c2410_gpio_getpull' was not declared. Should it be static?
gpio.c:138:6: warning: symbol 's3c2410_gpio_setpin' was not declared. Should it be static?
gpio.c:157:14: warning: symbol 's3c2410_gpio_getpin' was not declared. Should it be static?
gpio.c:184:5: warning: symbol 's3c2410_gpio_getirq' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/gpio.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c
index 95df059b5a1..5467470badf 100644
--- a/arch/arm/plat-s3c24xx/gpio.c
+++ b/arch/arm/plat-s3c24xx/gpio.c
@@ -29,6 +29,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
+#include <mach/gpio-fns.h>
 #include <asm/irq.h>
 
 #include <mach/regs-gpio.h>
-- 
cgit v1.2.3


From 0070994783cc7953416cf5da2e190c05edb01391 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Mon, 26 Oct 2009 21:19:27 +0000
Subject: ARM: S3C2440: mini2440: Fix spare warnings

Fix the following sparse warnings in arch/arm/mach-s3c2440/mach-mini2440.c
due to missing 'static'.

warning: symbol 'mini2440_lcd_cfg' was not declared. Should it be static?
warning: symbol 'mini2440_fb_info' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2440/mach-mini2440.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index ec71a696578..1c3382fefdd 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -144,7 +144,7 @@ static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = {
 	.type		= (S3C2410_LCDCON1_TFT16BPP |\
 			   S3C2410_LCDCON1_TFT)
 
-struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = {
+static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = {
 	[0] = {	/* mini2440 + 3.5" TFT + touchscreen */
 		_LCD_DECLARE(
 			7,			/* The 3.5 is quite fast */
@@ -191,7 +191,7 @@ struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = {
 #define S3C2410_GPCCON_MASK(x)	(3 << ((x) * 2))
 #define S3C2410_GPDCON_MASK(x)	(3 << ((x) * 2))
 
-struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
+static struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
 	.displays	 = &mini2440_lcd_cfg[0], /* not constant! see init */
 	.num_displays	 = 1,
 	.default_display = 0,
-- 
cgit v1.2.3


From 620abe28776d8cec0a275fac25e254c1f0bc1c73 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Mon, 26 Oct 2009 21:21:32 +0000
Subject: ARM: S3C2410: Fix sparse warnings in arch/arm/mach-s3c2410/gpio.c

Fix sparse warning in arch/arm/mach-s3c2410/gpio.c due to missing
include of <mach/gpio-fns.h>. Fixes the following warning:

warning: symbol 's3c2410_gpio_irqfilter' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/gpio.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c
index 7974afca297..9664e011dae 100644
--- a/arch/arm/mach-s3c2410/gpio.c
+++ b/arch/arm/mach-s3c2410/gpio.c
@@ -28,6 +28,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
+#include <mach/gpio-fns.h>
 #include <asm/irq.h>
 
 #include <mach/regs-gpio.h>
-- 
cgit v1.2.3


From 657e12fd388899502d47f9f6f9d276ec9ced8add Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Thu, 29 Oct 2009 17:06:17 +0000
Subject: ARM: Fix sparsemem with SPARSEMEM_EXTREME enabled

When SPARSEMEM_EXTREME is enabled, memory_present() wants to use bootmem
to allocate data structures.  However, we call memory_present() after
declaring memory to bootmem, but before we've reserved areas.

This leads to sparsemem data structures being overwritten later in the
kernel's initialization (when slab initializes.)

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/init.c | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 40940d7ce4f..52c40d15567 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -273,7 +273,6 @@ static void __init bootmem_init_node(int node, struct meminfo *mi,
 		struct membank *bank = &mi->bank[i];
 		if (!bank->highmem)
 			free_bootmem_node(pgdat, bank_phys_start(bank), bank_phys_size(bank));
-		memory_present(node, bank_pfn_start(bank), bank_pfn_end(bank));
 	}
 
 	/*
@@ -370,6 +369,19 @@ int pfn_valid(unsigned long pfn)
 	return 0;
 }
 EXPORT_SYMBOL(pfn_valid);
+
+static void arm_memory_present(struct meminfo *mi, int node)
+{
+}
+#else
+static void arm_memory_present(struct meminfo *mi, int node)
+{
+	int i;
+	for_each_nodebank(i, mi, node) {
+		struct membank *bank = &mi->bank[i];
+		memory_present(node, bank_pfn_start(bank), bank_pfn_end(bank));
+	}
+}
 #endif
 
 static int __init meminfo_cmp(const void *_a, const void *_b)
@@ -427,6 +439,12 @@ void __init bootmem_init(void)
 		 */
 		if (node == initrd_node)
 			bootmem_reserve_initrd(node);
+
+		/*
+		 * Sparsemem tries to allocate bootmem in memory_present(),
+		 * so must be done after the fixed reservations
+		 */
+		arm_memory_present(mi, node);
 	}
 
 	/*
-- 
cgit v1.2.3


From df71dfd4ca01130f98d9dbfab76c440d72a177c6 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sat, 24 Oct 2009 22:36:36 +0100
Subject: ARM: Fix errata 411920 workarounds

Errata 411920 indicates that any "invalidate entire instruction cache"
operation can fail if the right conditions are present.  This is not
limited just to those operations in flush.c, but elsewhere.  Place the
workaround in the already existing __flush_icache_all() function
instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/cacheflush.h |  5 +++++
 arch/arm/mm/context.c             |  5 +----
 arch/arm/mm/flush.c               | 31 ++++++-------------------------
 3 files changed, 12 insertions(+), 29 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index fd03fb63a33..3d0cdd21b88 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -414,9 +414,14 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page
 
 static inline void __flush_icache_all(void)
 {
+#ifdef CONFIG_ARM_ERRATA_411920
+	extern void v6_icache_inval_all(void);
+	v6_icache_inval_all();
+#else
 	asm("mcr	p15, 0, %0, c7, c5, 0	@ invalidate I-cache\n"
 	    :
 	    : "r" (0));
+#endif
 }
 
 #define ARCH_HAS_FLUSH_ANON_PAGE
diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c
index 6bda76a4319..a9e22e31eaa 100644
--- a/arch/arm/mm/context.c
+++ b/arch/arm/mm/context.c
@@ -50,10 +50,7 @@ void __new_context(struct mm_struct *mm)
 		isb();
 		flush_tlb_all();
 		if (icache_is_vivt_asid_tagged()) {
-			asm("mcr	p15, 0, %0, c7, c5, 0	@ invalidate I-cache\n"
-			    "mcr	p15, 0, %0, c7, c5, 6	@ flush BTAC/BTB\n"
-			    :
-			    : "r" (0));
+			__flush_icache_all();
 			dsb();
 		}
 	}
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index b27942909b2..7f294f307c8 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -18,10 +18,6 @@
 
 #include "mm.h"
 
-#ifdef CONFIG_ARM_ERRATA_411920
-extern void v6_icache_inval_all(void);
-#endif
-
 #ifdef CONFIG_CPU_CACHE_VIPT
 
 #define ALIAS_FLUSH_START	0xffff4000
@@ -35,16 +31,11 @@ static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr)
 	flush_tlb_kernel_page(to);
 
 	asm(	"mcrr	p15, 0, %1, %0, c14\n"
-	"	mcr	p15, 0, %2, c7, c10, 4\n"
-#ifndef CONFIG_ARM_ERRATA_411920
-	"	mcr	p15, 0, %2, c7, c5, 0\n"
-#endif
+	"	mcr	p15, 0, %2, c7, c10, 4"
 	    :
 	    : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES), "r" (zero)
 	    : "cc");
-#ifdef CONFIG_ARM_ERRATA_411920
-	v6_icache_inval_all();
-#endif
+	__flush_icache_all();
 }
 
 void flush_cache_mm(struct mm_struct *mm)
@@ -57,16 +48,11 @@ void flush_cache_mm(struct mm_struct *mm)
 
 	if (cache_is_vipt_aliasing()) {
 		asm(	"mcr	p15, 0, %0, c7, c14, 0\n"
-		"	mcr	p15, 0, %0, c7, c10, 4\n"
-#ifndef CONFIG_ARM_ERRATA_411920
-		"	mcr	p15, 0, %0, c7, c5, 0\n"
-#endif
+		"	mcr	p15, 0, %0, c7, c10, 4"
 		    :
 		    : "r" (0)
 		    : "cc");
-#ifdef CONFIG_ARM_ERRATA_411920
-		v6_icache_inval_all();
-#endif
+		__flush_icache_all();
 	}
 }
 
@@ -81,16 +67,11 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned
 
 	if (cache_is_vipt_aliasing()) {
 		asm(	"mcr	p15, 0, %0, c7, c14, 0\n"
-		"	mcr	p15, 0, %0, c7, c10, 4\n"
-#ifndef CONFIG_ARM_ERRATA_411920
-		"	mcr	p15, 0, %0, c7, c5, 0\n"
-#endif
+		"	mcr	p15, 0, %0, c7, c10, 4"
 		    :
 		    : "r" (0)
 		    : "cc");
-#ifdef CONFIG_ARM_ERRATA_411920
-		v6_icache_inval_all();
-#endif
+		__flush_icache_all();
 	}
 }
 
-- 
cgit v1.2.3


From 426fcd2a351e4bf662fee9fa2cf2603a48223164 Mon Sep 17 00:00:00 2001
From: Philby John <pjohn@in.mvista.com>
Date: Wed, 28 Oct 2009 19:09:12 +0100
Subject: ARM: 5774/1: Fix Realview ARM1176PB board reboot

This is the fix for proper reboot of Realview ARM1176PB board
when issuing the reboot command. Setting the eighth bit of
control register SYS_RESETCTL to 1 to force a soft reset.
arch_reset() is modified for realview machines to call machine
specific reset function pointers.

Signed-off-by: Philby John <pjohn@in.mvista.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-realview/core.h                      |  2 +-
 arch/arm/mach-realview/include/mach/board-pb1176.h |  5 +++++
 arch/arm/mach-realview/include/mach/board-pb11mp.h | 12 ++++++++++++
 arch/arm/mach-realview/include/mach/platform.h     | 15 +--------------
 arch/arm/mach-realview/include/mach/system.h       | 10 ++++------
 arch/arm/mach-realview/realview_pb1176.c           | 11 +++++++++++
 arch/arm/mach-realview/realview_pb11mp.c           | 16 ++++++++++++++++
 7 files changed, 50 insertions(+), 21 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 46cd6acb4d4..699671fa6e0 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -61,5 +61,5 @@ extern void realview_timer_init(unsigned int timer_irq);
 extern int realview_flash_register(struct resource *res, u32 num);
 extern int realview_eth_register(const char *name, struct resource *res);
 extern int realview_usb_register(struct resource *res);
-
+extern void (*realview_reset)(char);
 #endif
diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/include/mach/board-pb1176.h
index 98f8e7eeacc..34b80b7d40b 100644
--- a/arch/arm/mach-realview/include/mach/board-pb1176.h
+++ b/arch/arm/mach-realview/include/mach/board-pb1176.h
@@ -73,4 +73,9 @@
 #define REALVIEW_PB1176_GIC_DIST_BASE		0x10041000 /* GIC distributor, on FPGA */
 #define REALVIEW_PB1176_L220_BASE		0x10110000 /* L220 registers */
 
+/*
+ * Control register SYS_RESETCTL is set to 1 to force a soft reset
+ */
+#define REALVIEW_PB1176_SYS_LOCKVAL_RSTCTL    0x0100
+
 #endif	/* __ASM_ARCH_BOARD_PB1176_H */
diff --git a/arch/arm/mach-realview/include/mach/board-pb11mp.h b/arch/arm/mach-realview/include/mach/board-pb11mp.h
index f0d68e0fea0..7abf918b77e 100644
--- a/arch/arm/mach-realview/include/mach/board-pb11mp.h
+++ b/arch/arm/mach-realview/include/mach/board-pb11mp.h
@@ -81,4 +81,16 @@
 #define REALVIEW_TC11MP_GIC_DIST_BASE		0x1F001000	/* Test chip interrupt controller distributor */
 #define REALVIEW_TC11MP_L220_BASE		0x1F002000	/* L220 registers */
 
+ /*
+ * Values for REALVIEW_SYS_RESET_CTRL
+ */
+#define REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGCLR    0x01
+#define REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGINIT   0x02
+#define REALVIEW_PB11MP_SYS_CTRL_RESET_DLLRESET     0x03
+#define REALVIEW_PB11MP_SYS_CTRL_RESET_PLLRESET     0x04
+#define REALVIEW_PB11MP_SYS_CTRL_RESET_POR          0x05
+#define REALVIEW_PB11MP_SYS_CTRL_RESET_DoC          0x06
+
+#define REALVIEW_PB11MP_SYS_CTRL_LED         (1 << 0)
+
 #endif	/* __ASM_ARCH_BOARD_PB11MP_H */
diff --git a/arch/arm/mach-realview/include/mach/platform.h b/arch/arm/mach-realview/include/mach/platform.h
index c8f50835fed..4f46bf71e75 100644
--- a/arch/arm/mach-realview/include/mach/platform.h
+++ b/arch/arm/mach-realview/include/mach/platform.h
@@ -119,19 +119,6 @@
 #define REALVIEW_SYS_TEST_OSC3               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC3_OFFSET)
 #define REALVIEW_SYS_TEST_OSC4               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC4_OFFSET)
 
-/* 
- * Values for REALVIEW_SYS_RESET_CTRL
- */
-#define REALVIEW_SYS_CTRL_RESET_CONFIGCLR    0x01
-#define REALVIEW_SYS_CTRL_RESET_CONFIGINIT   0x02
-#define REALVIEW_SYS_CTRL_RESET_DLLRESET     0x03
-#define REALVIEW_SYS_CTRL_RESET_PLLRESET     0x04
-#define REALVIEW_SYS_CTRL_RESET_POR          0x05
-#define REALVIEW_SYS_CTRL_RESET_DoC          0x06
-
-#define REALVIEW_SYS_CTRL_LED         (1 << 0)
-
-
 /* ------------------------------------------------------------------------
  *  RealView control registers
  * ------------------------------------------------------------------------
@@ -153,7 +140,7 @@
  *     SYS_CLD, SYS_BOOTCS
  */
 #define REALVIEW_SYS_LOCK_LOCKED    (1 << 16)
-#define REALVIEW_SYS_LOCKVAL_MASK	0xFFFF		/* write 0xA05F to enable write access */
+#define REALVIEW_SYS_LOCKVAL_MASK	0xA05F	       /* Enable write access */
 
 /*
  * REALVIEW_SYS_FLASH
diff --git a/arch/arm/mach-realview/include/mach/system.h b/arch/arm/mach-realview/include/mach/system.h
index 1a15a441e02..a30f2e3ec17 100644
--- a/arch/arm/mach-realview/include/mach/system.h
+++ b/arch/arm/mach-realview/include/mach/system.h
@@ -25,6 +25,8 @@
 #include <mach/hardware.h>
 #include <mach/platform.h>
 
+void (*realview_reset)(char mode);
+
 static inline void arch_idle(void)
 {
 	/*
@@ -36,16 +38,12 @@ static inline void arch_idle(void)
 
 static inline void arch_reset(char mode, const char *cmd)
 {
-	void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_RESETCTL_OFFSET;
-	unsigned int val;
-
 	/*
 	 * To reset, we hit the on-board reset register
 	 * in the system FPGA
 	 */
-	val = __raw_readl(hdr_ctrl);
-	val |= REALVIEW_SYS_CTRL_RESET_CONFIGCLR;
-	__raw_writel(val, hdr_ctrl);
+	if (realview_reset)
+		realview_reset(mode);
 }
 
 #endif
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 2817fe09931..a6ba147692c 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -290,6 +290,16 @@ static struct sys_timer realview_pb1176_timer = {
 	.init		= realview_pb1176_timer_init,
 };
 
+static void realview_pb1176_reset(char mode)
+{
+	void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) +
+		REALVIEW_SYS_RESETCTL_OFFSET;
+	void __iomem *rst_hdr_ctrl = __io_address(REALVIEW_SYS_BASE) +
+		REALVIEW_SYS_LOCK_OFFSET;
+	__raw_writel(REALVIEW_SYS_LOCKVAL_MASK, rst_hdr_ctrl);
+	__raw_writel(REALVIEW_PB1176_SYS_LOCKVAL_RSTCTL, hdr_ctrl);
+}
+
 static void __init realview_pb1176_init(void)
 {
 	int i;
@@ -313,6 +323,7 @@ static void __init realview_pb1176_init(void)
 #ifdef CONFIG_LEDS
 	leds_event = realview_leds_event;
 #endif
+	realview_reset = realview_pb1176_reset;
 }
 
 MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 94680fcf726..070d284ce96 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -299,6 +299,21 @@ static struct sys_timer realview_pb11mp_timer = {
 	.init		= realview_pb11mp_timer_init,
 };
 
+static void realview_pb11mp_reset(char mode)
+{
+	void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) +
+		REALVIEW_SYS_RESETCTL_OFFSET;
+	unsigned int val;
+
+	/*
+	 * To reset, we hit the on-board reset register
+	 * in the system FPGA
+	 */
+	val = __raw_readl(hdr_ctrl);
+	val |= REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGCLR;
+	__raw_writel(val, hdr_ctrl);
+}
+
 static void __init realview_pb11mp_init(void)
 {
 	int i;
@@ -324,6 +339,7 @@ static void __init realview_pb11mp_init(void)
 #ifdef CONFIG_LEDS
 	leds_event = realview_leds_event;
 #endif
+	realview_reset = realview_pb11mp_reset;
 }
 
 MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
-- 
cgit v1.2.3


From 6603a4fd5195a004dec5f9568e38ff76bae630c1 Mon Sep 17 00:00:00 2001
From: Claudio Scordino <claudio@evidence.eu.com>
Date: Fri, 30 Oct 2009 12:06:05 +0100
Subject: ARM: 5776/1: Check compiler version and EABI support when adding ARM
 unwind support.

ARM unwind is known to compile only with EABI and not-buggy compilers.
The problem is not the unwinding information but the -fno-frame-pointer
option added as a result of !CONFIG_FRAME_POINTER.  Now we check the
compiler and raise a #warning in case of wrong compiler.

Signed-off-by: Claudio Scordino <claudio@evidence.eu.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/unwind.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
index 39baf1128bf..786ac2b6914 100644
--- a/arch/arm/kernel/unwind.c
+++ b/arch/arm/kernel/unwind.c
@@ -26,6 +26,15 @@
  * http://infocenter.arm.com/help/topic/com.arm.doc.subset.swdev.abi/index.html
  */
 
+#if !defined (__ARM_EABI__)
+#warning Your compiler does not have EABI support.
+#warning    ARM unwind is known to compile only with EABI compilers.
+#warning    Change compiler or disable ARM_UNWIND option.
+#elif (__GNUC__ == 4 && __GNUC_MINOR__ <= 2)
+#warning Your compiler is too buggy; it is known to not compile ARM unwind support.
+#warning    Change compiler or disable ARM_UNWIND option.
+#endif
+
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/module.h>
-- 
cgit v1.2.3


From 4b46d6416548fb6a0940dfd9911fd895eb6247b3 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun, 1 Nov 2009 17:44:24 +0000
Subject: ARM: ensure initial page tables are setup for SMP systems

Mapping the same memory using two different attributes (memory
type, shareability, cacheability) is unpredictable.  During boot,
we encounter a situation when we're updating the kernel's page
tables which can lead to dirty cache lines existing in the cache
which are subsequently missed.  This causes stack corruption,
and therefore a crash.

Therefore, ensure that the shared and cacheability settings
matches the configuration that will be used later; this together
with the restriction in early_cachepolicy() ensures that we won't
create a mismatch during boot.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/mmu.c     | 7 +++++++
 arch/arm/mm/proc-v6.S | 7 ++++---
 arch/arm/mm/proc-v7.S | 7 ++++---
 3 files changed, 15 insertions(+), 6 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 02243eeccf5..ea67be0223a 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -117,6 +117,13 @@ static void __init early_cachepolicy(char **p)
 	}
 	if (i == ARRAY_SIZE(cache_policies))
 		printk(KERN_ERR "ERROR: unknown or unsupported cache policy\n");
+	/*
+	 * This restriction is partly to do with the way we boot; it is
+	 * unpredictable to have memory mapped using two different sets of
+	 * memory attributes (shared, type, and cache attribs).  We can not
+	 * change these attributes once the initial assembly has setup the
+	 * page tables.
+	 */
 	if (cpu_architecture() >= CPU_ARCH_ARMv6) {
 		printk(KERN_WARNING "Only cachepolicy=writeback supported on ARMv6 and later\n");
 		cachepolicy = CPOLICY_WRITEBACK;
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 194737d60a2..70f75d2e3ea 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -32,8 +32,10 @@
 
 #ifndef CONFIG_SMP
 #define TTB_FLAGS	TTB_RGN_WBWA
+#define PMD_FLAGS	PMD_SECT_WB
 #else
 #define TTB_FLAGS	TTB_RGN_WBWA|TTB_S
+#define PMD_FLAGS	PMD_SECT_WBWA|PMD_SECT_S
 #endif
 
 ENTRY(cpu_v6_proc_init)
@@ -222,10 +224,9 @@ __v6_proc_info:
 	.long	0x0007b000
 	.long	0x0007f000
 	.long   PMD_TYPE_SECT | \
-		PMD_SECT_BUFFERABLE | \
-		PMD_SECT_CACHEABLE | \
 		PMD_SECT_AP_WRITE | \
-		PMD_SECT_AP_READ
+		PMD_SECT_AP_READ | \
+		PMD_FLAGS
 	.long   PMD_TYPE_SECT | \
 		PMD_SECT_XN | \
 		PMD_SECT_AP_WRITE | \
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 23ebcf6eab9..eeeed01ee44 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -33,9 +33,11 @@
 #ifndef CONFIG_SMP
 /* PTWs cacheable, inner WB not shareable, outer WB not shareable */
 #define TTB_FLAGS	TTB_IRGN_WB|TTB_RGN_OC_WB
+#define PMD_FLAGS	PMD_SECT_WB
 #else
 /* PTWs cacheable, inner WBWA shareable, outer WBWA not shareable */
 #define TTB_FLAGS	TTB_IRGN_WBWA|TTB_S|TTB_NOS|TTB_RGN_OC_WBWA
+#define PMD_FLAGS	PMD_SECT_WBWA|PMD_SECT_S
 #endif
 
 ENTRY(cpu_v7_proc_init)
@@ -326,10 +328,9 @@ __v7_proc_info:
 	.long	0x000f0000		@ Required ID value
 	.long	0x000f0000		@ Mask for ID
 	.long   PMD_TYPE_SECT | \
-		PMD_SECT_BUFFERABLE | \
-		PMD_SECT_CACHEABLE | \
 		PMD_SECT_AP_WRITE | \
-		PMD_SECT_AP_READ
+		PMD_SECT_AP_READ | \
+		PMD_FLAGS
 	.long   PMD_TYPE_SECT | \
 		PMD_SECT_XN | \
 		PMD_SECT_AP_WRITE | \
-- 
cgit v1.2.3


From 5e0fa3f63eda875cbe23be37d64a16c65a577209 Mon Sep 17 00:00:00 2001
From: Stanislav Brabec <utx@penguin.cz>
Date: Thu, 22 Oct 2009 23:05:03 +0200
Subject: [ARM] pxa/zaurus: fix NAND flash OOB layout for Borzoi

Borzoi, Terrier and Akita use the same NAND Flash OOB layout, which
seems to be different from Spitz for some reason. Here is a fix.

When the code was ported to the platform data, the map was applied just
for Akita.

After this patch, Flash works again on Borzoi. Terrier still has a
problem with partition table different from Borzoi (unfixable without
reading of the system configuration in flash) and JFFS2 partitions can
be mounted (with some "Empty flash at ... ends at ..." in the syslog).

Signed-off-by: Stanislav Brabec <utx@penguin.cz>
Acked-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/spitz.c | 39 +++++++++++++++++++++++----------------
 1 file changed, 23 insertions(+), 16 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 82ff5733e4d..3da45d05174 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -779,11 +779,34 @@ static void __init common_init(void)
 	pxa_set_i2c_info(NULL);
 }
 
+#if defined(CONFIG_MACH_AKITA) || defined(CONFIG_MACH_BORZOI)
+static struct nand_bbt_descr sharpsl_akita_bbt = {
+	.options = 0,
+	.offs = 4,
+	.len = 1,
+	.pattern = scan_ff_pattern
+};
+
+static struct nand_ecclayout akita_oobinfo = {
+	.eccbytes = 24,
+	.eccpos = {
+		   0x5, 0x1, 0x2, 0x3, 0x6, 0x7, 0x15, 0x11,
+		   0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23,
+		   0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37},
+	.oobfree = {{0x08, 0x09}}
+};
+#endif
+
 #if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
 static void __init spitz_init(void)
 {
 	spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON;
 
+	if (machine_is_borzoi()) {
+		sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt;
+		sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo;
+	}
+
 	platform_scoop_config = &spitz_pcmcia_config;
 
 	common_init();
@@ -808,22 +831,6 @@ static struct i2c_board_info akita_i2c_board_info[] = {
 	},
 };
 
-static struct nand_bbt_descr sharpsl_akita_bbt = {
-	.options = 0,
-	.offs = 4,
-	.len = 1,
-	.pattern = scan_ff_pattern
-};
-
-static struct nand_ecclayout akita_oobinfo = {
-	.eccbytes = 24,
-	.eccpos = {
-		   0x5, 0x1, 0x2, 0x3, 0x6, 0x7, 0x15, 0x11,
-		   0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23,
-		   0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37},
-	.oobfree = {{0x08, 0x09}}
-};
-
 static void __init akita_init(void)
 {
 	spitz_ficp_platform_data.gpio_pwdown = AKITA_GPIO_IR_ON;
-- 
cgit v1.2.3


From 902805dbdae016653768f7139d7b3ab36a20cc6d Mon Sep 17 00:00:00 2001
From: Ondrej Zajicek <santiago@crfreenet.org>
Date: Mon, 26 Oct 2009 23:59:30 +0100
Subject: [ARM] pxa/palm: fix incorrect initialization of Palm Tungsten C
 keyboard

Palm Tungsten C keyboard structure has swapped
rows/cols gpio structures and does not work.
This patch fixes it.

Signed-off-by: Ondrej Zajicek <santiago@crfreenet.org>
Cc: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/palmtc.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index bb2cc0dd44e..0b92291a58f 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -292,10 +292,10 @@ const static unsigned int palmtc_keypad_col_gpios[] = {
 
 static struct matrix_keypad_platform_data palmtc_keypad_platform_data = {
 	.keymap_data	= &palmtc_keymap_data,
-	.col_gpios	= palmtc_keypad_row_gpios,
-	.num_col_gpios	= 12,
-	.row_gpios	= palmtc_keypad_col_gpios,
-	.num_row_gpios	= 4,
+	.row_gpios	= palmtc_keypad_row_gpios,
+	.num_row_gpios	= ARRAY_SIZE(palmtc_keypad_row_gpios),
+	.col_gpios	= palmtc_keypad_col_gpios,
+	.num_col_gpios	= ARRAY_SIZE(palmtc_keypad_col_gpios),
 	.active_low	= 1,
 
 	.debounce_ms		= 20,
-- 
cgit v1.2.3


From c482ae4dcf23fd241321595d71bbe8aee33eabf5 Mon Sep 17 00:00:00 2001
From: Haojian Zhuang <haojian.zhuang@marvell.com>
Date: Mon, 2 Nov 2009 14:02:21 -0500
Subject: [ARM] pxa: fix resume failure by saving/restoring IPRx registers

Since interrupt handler is changed to use interrupt priority, we also need
to save and restore these interrupt controller registers in suspend/resume
routine.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Tested-by: Daniel Mack <daniel@caiaq.de>
Tested-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/irq.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index d694ce28966..6112af431fa 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -25,6 +25,8 @@
 
 #include "generic.h"
 
+#define MAX_INTERNAL_IRQS	128
+
 #define IRQ_BIT(n)	(((n) - PXA_IRQ(0)) & 0x1f)
 #define _ICMR(n)	(*((((n) - PXA_IRQ(0)) & ~0x1f) ? &ICMR2 : &ICMR))
 #define _ICLR(n)	(*((((n) - PXA_IRQ(0)) & ~0x1f) ? &ICLR2 : &ICLR))
@@ -122,6 +124,8 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn)
 {
 	int irq, i;
 
+	BUG_ON(irq_nr > MAX_INTERNAL_IRQS);
+
 	pxa_internal_irq_nr = irq_nr;
 
 	for (irq = PXA_IRQ(0); irq < PXA_IRQ(irq_nr); irq += 32) {
@@ -149,7 +153,8 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn)
 }
 
 #ifdef CONFIG_PM
-static unsigned long saved_icmr[2];
+static unsigned long saved_icmr[MAX_INTERNAL_IRQS/32];
+static unsigned long saved_ipr[MAX_INTERNAL_IRQS];
 
 static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state)
 {
@@ -159,6 +164,8 @@ static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state)
 		saved_icmr[i] = _ICMR(irq);
 		_ICMR(irq) = 0;
 	}
+	for (i = 0; i < pxa_internal_irq_nr; i++)
+		saved_ipr[i] = IPR(i);
 
 	return 0;
 }
@@ -171,6 +178,8 @@ static int pxa_irq_resume(struct sys_device *dev)
 		_ICMR(irq) = saved_icmr[i];
 		_ICLR(irq) = 0;
 	}
+	for (i = 0; i < pxa_internal_irq_nr; i++)
+		IPR(i) = saved_ipr[i];
 
 	ICCR = 1;
 	return 0;
-- 
cgit v1.2.3


From d8951adeba05719b9efd7ce875a3294ffdbb37ea Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Mon, 21 Sep 2009 12:03:56 +0200
Subject: at91: at91sam9g45 family: identify several chip versions

cpu_is_xxx() macros are identifying generic at91sam9g45 chip. This patch adds
the capacity to differentiate Engineering Samples and final lots through the
inclusion of  at91_cpu_fully_identify() and the related chip IDs with chip
version field preserved.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
---
 arch/arm/mach-at91/include/mach/cpu.h | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index 34a9502c48b..c22df30ed5e 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -25,6 +25,8 @@
 #define ARCH_ID_AT91SAM9G20	0x019905a0
 #define ARCH_ID_AT91SAM9RL64	0x019b03a0
 #define ARCH_ID_AT91SAM9G45	0x819b05a0
+#define ARCH_ID_AT91SAM9G45MRL	0x819b05a2	/* aka 9G45-ES2 & non ES lots */
+#define ARCH_ID_AT91SAM9G45ES	0x819b05a1	/* 9G45-ES (Engineering Sample) */
 #define ARCH_ID_AT91CAP9	0x039A03A0
 
 #define ARCH_ID_AT91SAM9XE128	0x329973a0
@@ -41,6 +43,11 @@ static inline unsigned long at91_cpu_identify(void)
 	return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION);
 }
 
+static inline unsigned long at91_cpu_fully_identify(void)
+{
+	return at91_sys_read(AT91_DBGU_CIDR);
+}
+
 #define ARCH_EXID_AT91SAM9M11	0x00000001
 #define ARCH_EXID_AT91SAM9M10	0x00000002
 #define ARCH_EXID_AT91SAM9G45	0x00000004
@@ -118,8 +125,10 @@ static inline unsigned long at91cap9_rev_identify(void)
 
 #ifdef CONFIG_ARCH_AT91SAM9G45
 #define cpu_is_at91sam9g45()	(at91_cpu_identify() == ARCH_ID_AT91SAM9G45)
+#define cpu_is_at91sam9g45es()	(at91_cpu_fully_identify() == ARCH_ID_AT91SAM9G45ES)
 #else
 #define cpu_is_at91sam9g45()	(0)
+#define cpu_is_at91sam9g45es()	(0)
 #endif
 
 #ifdef CONFIG_ARCH_AT91CAP9
-- 
cgit v1.2.3


From 1b3a02eb452354fa9b36a7f33dc4c8307bbc40aa Mon Sep 17 00:00:00 2001
From: Tony Thompson <Anthony.Thompson@arm.com>
Date: Wed, 4 Nov 2009 12:16:38 +0000
Subject: ARMv7: Check whether the SMP/nAMP mode was already enabled

If running in non-secure mode, enabling this register will fault.

Signed-off-by: Tony Thompson <Anthony.Thompson@arm.com>
Acked-by: Srinidhi Kasagar <srinidhikasagar@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mm/proc-v7.S | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index eeeed01ee44..3a285218fd1 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -186,9 +186,10 @@ cpu_v7_name:
  */
 __v7_setup:
 #ifdef CONFIG_SMP
-	mrc	p15, 0, r0, c1, c0, 1		@ Enable SMP/nAMP mode and
-	orr	r0, r0, #(1 << 6) | (1 << 0)	@ TLB ops broadcasting
-	mcr	p15, 0, r0, c1, c0, 1
+	mrc	p15, 0, r0, c1, c0, 1
+	tst	r0, #(1 << 6)			@ SMP/nAMP mode enabled?
+	orreq	r0, r0, #(1 << 6) | (1 << 0)	@ Enable SMP/nAMP mode and
+	mcreq	p15, 0, r0, c1, c0, 1		@ TLB ops broadcasting
 #endif
 	adr	r12, __v7_setup_stack		@ the local stack
 	stmia	r12, {r0-r5, r7, r9, r11, lr}
-- 
cgit v1.2.3


From 9b229fa0951fb47cbc178be4bd8e9ef185b38802 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Wed, 4 Nov 2009 12:16:38 +0000
Subject: Check whether the SCU was already initialised

If Linux is running in non-secure mode, this register may have been
already initialised and writing to the control register not allowed.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/kernel/smp_scu.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c
index d3831f616ee..9ab4149bd98 100644
--- a/arch/arm/kernel/smp_scu.c
+++ b/arch/arm/kernel/smp_scu.c
@@ -37,6 +37,10 @@ void __init scu_enable(void __iomem *scu_base)
 	u32 scu_ctrl;
 
 	scu_ctrl = __raw_readl(scu_base + SCU_CTRL);
+	/* already enabled? */
+	if (scu_ctrl & 1)
+		return;
+
 	scu_ctrl |= 1;
 	__raw_writel(scu_ctrl, scu_base + SCU_CTRL);
 
-- 
cgit v1.2.3


From 5b39d1548dc2751f8de89e6f429b6560a137eebb Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Wed, 4 Nov 2009 12:19:04 +0000
Subject: RealView: Add default memory configuration

This patch adds a realview_fixup() function called during booting to set
up the memory banks. This way there is no need to pass a "mem=" argument
on the kernel command line.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mach-realview/core.c            | 21 +++++++++++++++++++++
 arch/arm/mach-realview/core.h            |  6 ++++++
 arch/arm/mach-realview/realview_eb.c     |  1 +
 arch/arm/mach-realview/realview_pb1176.c | 13 +++++++++++++
 arch/arm/mach-realview/realview_pb11mp.c |  1 +
 arch/arm/mach-realview/realview_pba8.c   |  1 +
 arch/arm/mach-realview/realview_pbx.c    |  1 +
 7 files changed, 44 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index a2083b60e3f..c21b0fd3965 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -788,3 +788,24 @@ void __init realview_timer_init(unsigned int timer_irq)
 	realview_clocksource_init();
 	realview_clockevents_init(timer_irq);
 }
+
+/*
+ * Setup the memory banks.
+ */
+void realview_fixup(struct machine_desc *mdesc, struct tag *tags, char **from,
+		    struct meminfo *meminfo)
+{
+	/*
+	 * Most RealView platforms have 512MB contiguous RAM at 0x70000000.
+	 * Half of this is mirrored at 0.
+	 */
+#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET
+	meminfo->bank[0].start = 0x70000000;
+	meminfo->bank[0].size = SZ_512M;
+	meminfo->nr_banks = 1;
+#else
+	meminfo->bank[0].start = 0;
+	meminfo->bank[0].size = SZ_256M;
+	meminfo->nr_banks = 1;
+#endif
+}
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 699671fa6e0..781bca68a9f 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -25,6 +25,7 @@
 #include <linux/amba/bus.h>
 #include <linux/io.h>
 
+#include <asm/setup.h>
 #include <asm/leds.h>
 
 #define AMBA_DEVICE(name,busid,base,plat)			\
@@ -44,6 +45,8 @@ static struct amba_device name##_device = {			\
 	/* .dma		= base##_DMA,*/				\
 }
 
+struct machine_desc;
+
 extern struct platform_device realview_flash_device;
 extern struct platform_device realview_cf_device;
 extern struct platform_device realview_i2c_device;
@@ -61,5 +64,8 @@ extern void realview_timer_init(unsigned int timer_irq);
 extern int realview_flash_register(struct resource *res, u32 num);
 extern int realview_eth_register(const char *name, struct resource *res);
 extern int realview_usb_register(struct resource *res);
+extern void realview_fixup(struct machine_desc *mdesc, struct tag *tags,
+			   char **from, struct meminfo *meminfo);
 extern void (*realview_reset)(char);
+
 #endif
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 1d65e64ae57..917f8ca3abf 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -415,6 +415,7 @@ MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
 	.phys_io	= REALVIEW_EB_UART0_BASE,
 	.io_pg_offst	= (IO_ADDRESS(REALVIEW_EB_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
+	.fixup		= realview_fixup,
 	.map_io		= realview_eb_map_io,
 	.init_irq	= gic_init_irq,
 	.timer		= &realview_eb_timer,
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index a6ba147692c..7fb726d5f8b 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -300,6 +300,18 @@ static void realview_pb1176_reset(char mode)
 	__raw_writel(REALVIEW_PB1176_SYS_LOCKVAL_RSTCTL, hdr_ctrl);
 }
 
+static void realview_pb1176_fixup(struct machine_desc *mdesc,
+				  struct tag *tags, char **from,
+				  struct meminfo *meminfo)
+{
+	/*
+	 * RealView PB1176 only has 128MB of RAM mapped at 0.
+	 */
+	meminfo->bank[0].start = 0;
+	meminfo->bank[0].size = SZ_128M;
+	meminfo->nr_banks = 1;
+}
+
 static void __init realview_pb1176_init(void)
 {
 	int i;
@@ -331,6 +343,7 @@ MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
 	.phys_io	= REALVIEW_PB1176_UART0_BASE,
 	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PB1176_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
+	.fixup		= realview_pb1176_fixup,
 	.map_io		= realview_pb1176_map_io,
 	.init_irq	= gic_init_irq,
 	.timer		= &realview_pb1176_timer,
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 070d284ce96..9bbbfc05f22 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -347,6 +347,7 @@ MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
 	.phys_io	= REALVIEW_PB11MP_UART0_BASE,
 	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PB11MP_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
+	.fixup		= realview_fixup,
 	.map_io		= realview_pb11mp_map_io,
 	.init_irq	= gic_init_irq,
 	.timer		= &realview_pb11mp_timer,
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 941beb2b970..fe861e96c56 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -298,6 +298,7 @@ MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
 	.phys_io	= REALVIEW_PBA8_UART0_BASE,
 	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PBA8_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
+	.fixup		= realview_fixup,
 	.map_io		= realview_pba8_map_io,
 	.init_irq	= gic_init_irq,
 	.timer		= &realview_pba8_timer,
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 7e4bc6cdca5..5d09d8b4a1c 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -345,6 +345,7 @@ MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
 	.phys_io	= REALVIEW_PBX_UART0_BASE,
 	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PBX_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
+	.fixup		= realview_fixup,
 	.map_io		= realview_pbx_map_io,
 	.init_irq	= gic_init_irq,
 	.timer		= &realview_pbx_timer,
-- 
cgit v1.2.3


From 157aed7473d300587e89cc87e13f194e3fa6fa36 Mon Sep 17 00:00:00 2001
From: Colin Tuckley <colin.tuckley@arm.com>
Date: Wed, 4 Nov 2009 12:19:05 +0000
Subject: RealView: Remove duplicated #define REALVIEW_SYS_FLAGS* statements

The platsmp.c file defines the REALVIEW_SYS_FLAGS* macros which are
already present in platform.h. Just use the latter.

Signed-off-by: Colin Tuckley <colin.tuckley@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mach-realview/platsmp.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index a88458b4799..009265818d5 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -146,11 +146,8 @@ static void __init poke_milo(void)
 	 * register. The BootMonitor waits for this register to become
 	 * non-zero.
 	 */
-#define REALVIEW_SYS_FLAGSS_OFFSET 0x30
-#define REALVIEW_SYS_FLAGSC_OFFSET 0x34
 	__raw_writel(BSYM(virt_to_phys(realview_secondary_startup)),
-		     __io_address(REALVIEW_SYS_BASE) +
-		     REALVIEW_SYS_FLAGSS_OFFSET);
+		     __io_address(REALVIEW_SYS_FLAGSSET));
 
 	mb();
 }
-- 
cgit v1.2.3


From c97c5aa83c41a532bc67da356d77da929bc41b9c Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Wed, 4 Nov 2009 12:19:05 +0000
Subject: RealView: Add sparsemem support for the RealView PBX platform

The RealView PBX board has two 512MB blocks of memory - one at
0x70000000 (with 256MB mirror at 0) and another at 0x20000000. Only the
block at 0x70000000 (or the mirror at 0) may be used for DMA (e.g.
framebuffer). This patch adds the sparsemem definitions to allow the use
of all the memory split as follows:

  256MB @ 0x00000000 (ZONE_DMA)
  512MB @ 0x20000000 (ZONE_NORMAL)
  256MB @ 0x80000000 (ZONE_NORMAL)

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mach-realview/Kconfig               |  5 ++-
 arch/arm/mach-realview/core.c                | 21 +++++++++++-
 arch/arm/mach-realview/include/mach/memory.h | 49 ++++++++++++++++++++++++++++
 arch/arm/mach-realview/realview_pbx.c        | 22 ++++++++++++-
 4 files changed, 94 insertions(+), 3 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index dfc9b0bc6eb..c48e1f2c334 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -70,6 +70,8 @@ config MACH_REALVIEW_PBX
 	bool "Support RealView/PBX platform"
 	select ARM_GIC
 	select HAVE_PATA_PLATFORM
+	select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !HIGH_PHYS_OFFSET
+	select ZONE_DMA if SPARSEMEM
 	help
 	  Include support for the ARM(R) RealView PBX platform.
 
@@ -82,6 +84,7 @@ config REALVIEW_HIGH_PHYS_OFFSET
 	  0x70000000, 256MB of which being mirrored at 0x00000000. If
 	  the board supports 512MB of RAM, this option allows the
 	  memory to be accessed contiguously at the high physical
-	  offset.
+	  offset. On the PBX board, disabling this option allows 1GB of
+	  RAM to be used with SPARSEMEM.
 
 endmenu
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index c21b0fd3965..9f293438e02 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -59,6 +59,25 @@
 /* used by entry-macro.S and platsmp.c */
 void __iomem *gic_cpu_base_addr;
 
+#ifdef CONFIG_ZONE_DMA
+/*
+ * Adjust the zones if there are restrictions for DMA access.
+ */
+void __init realview_adjust_zones(int node, unsigned long *size,
+				  unsigned long *hole)
+{
+	unsigned long dma_size = SZ_256M >> PAGE_SHIFT;
+
+	if (!machine_is_realview_pbx() || node || (size[0] <= dma_size))
+		return;
+
+	size[ZONE_NORMAL] = size[0] - dma_size;
+	size[ZONE_DMA] = dma_size;
+	hole[ZONE_NORMAL] = hole[0];
+	hole[ZONE_DMA] = 0;
+}
+#endif
+
 /*
  * This is the RealView sched_clock implementation.  This has
  * a resolution of 41.7ns, and a maximum value of about 179s.
@@ -543,7 +562,7 @@ static int realview_clcd_setup(struct clcd_fb *fb)
 	fb->panel		= realview_clcd_panel();
 
 	fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize,
-						    &dma, GFP_KERNEL);
+						    &dma, GFP_KERNEL | GFP_DMA);
 	if (!fb->fb.screen_base) {
 		printk(KERN_ERR "CLCD: unable to map framebuffer\n");
 		return -ENOMEM;
diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h
index 293c30025e7..2417bbcf97f 100644
--- a/arch/arm/mach-realview/include/mach/memory.h
+++ b/arch/arm/mach-realview/include/mach/memory.h
@@ -29,4 +29,53 @@
 #define PHYS_OFFSET		UL(0x00000000)
 #endif
 
+#if !defined(__ASSEMBLY__) && defined(CONFIG_ZONE_DMA)
+extern void realview_adjust_zones(int node, unsigned long *size,
+				  unsigned long *hole);
+#define arch_adjust_zones(node, size, hole) \
+	realview_adjust_zones(node, size, hole)
+
+#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_256M - 1)
+#define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_256M)
+#endif
+
+#ifdef CONFIG_SPARSEMEM
+
+/*
+ * Sparsemem definitions for RealView PBX.
+ *
+ * The RealView PBX board has another block of 512MB of RAM at 0x20000000,
+ * however only the block at 0x70000000 (or the 256MB mirror at 0x00000000)
+ * may be used for DMA.
+ *
+ * The macros below define a section size of 256MB and a non-linear virtual to
+ * physical mapping:
+ *
+ * 256MB @ 0x00000000 -> PAGE_OFFSET
+ * 512MB @ 0x20000000 -> PAGE_OFFSET + 0x10000000
+ * 256MB @ 0x80000000 -> PAGE_OFFSET + 0x30000000
+ */
+#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET
+#error "SPARSEMEM not available with REALVIEW_HIGH_PHYS_OFFSET"
+#endif
+
+#define MAX_PHYSMEM_BITS	32
+#define SECTION_SIZE_BITS	28
+
+/* bank page offsets */
+#define PAGE_OFFSET1	(PAGE_OFFSET + 0x10000000)
+#define PAGE_OFFSET2	(PAGE_OFFSET + 0x30000000)
+
+#define __phys_to_virt(phys)						\
+	((phys) >= 0x80000000 ?	(phys) - 0x80000000 + PAGE_OFFSET2 :	\
+	 (phys) >= 0x20000000 ?	(phys) - 0x20000000 + PAGE_OFFSET1 :	\
+	 (phys) + PAGE_OFFSET)
+
+#define __virt_to_phys(virt)						\
+	 ((virt) >= PAGE_OFFSET2 ? (virt) - PAGE_OFFSET2 + 0x80000000 :	\
+	  (virt) >= PAGE_OFFSET1 ? (virt) - PAGE_OFFSET1 + 0x20000000 :	\
+	  (virt) - PAGE_OFFSET)
+
+#endif	/* CONFIG_SPARSEMEM */
+
 #endif
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 5d09d8b4a1c..ec39488e2b4 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -304,6 +304,26 @@ static struct sys_timer realview_pbx_timer = {
 	.init		= realview_pbx_timer_init,
 };
 
+static void realview_pbx_fixup(struct machine_desc *mdesc, struct tag *tags,
+			       char **from, struct meminfo *meminfo)
+{
+#ifdef CONFIG_SPARSEMEM
+	/*
+	 * Memory configuration with SPARSEMEM enabled on RealView PBX (see
+	 * asm/mach/memory.h for more information).
+	 */
+	meminfo->bank[0].start = 0;
+	meminfo->bank[0].size = SZ_256M;
+	meminfo->bank[1].start = 0x20000000;
+	meminfo->bank[1].size = SZ_512M;
+	meminfo->bank[2].start = 0x80000000;
+	meminfo->bank[2].size = SZ_256M;
+	meminfo->nr_banks = 3;
+#else
+	realview_fixup(mdesc, tags, from, meminfo);
+#endif
+}
+
 static void __init realview_pbx_init(void)
 {
 	int i;
@@ -345,7 +365,7 @@ MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
 	.phys_io	= REALVIEW_PBX_UART0_BASE,
 	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PBX_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
-	.fixup		= realview_fixup,
+	.fixup		= realview_pbx_fixup,
 	.map_io		= realview_pbx_map_io,
 	.init_irq	= gic_init_irq,
 	.timer		= &realview_pbx_timer,
-- 
cgit v1.2.3


From d525753bf30fe29a2897273e180fc24723350dcc Mon Sep 17 00:00:00 2001
From: Jean-Christop PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Mon, 2 Nov 2009 20:13:32 +0100
Subject: ARM: 5779/1: ep93xx/micro9.c: fix implicit declaration of function
 __raw_readl and IOMEM

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/micro9.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index d83b80478b0..f3757a1c5a1 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 
-- 
cgit v1.2.3


From c742239866250a5690485ab775b942c85c6bee63 Mon Sep 17 00:00:00 2001
From: zeal <zealcook@gmail.com>
Date: Tue, 3 Nov 2009 02:36:55 +0100
Subject: ARM: 5780/1: KS8695: Fix macro definition bug in regs-switch.c

NOTE:
1. Macro style is so strange.
2. The value 0xc0 is not match with KS8695 manual. It should be 0x0c.

Signed-off-by: zeal <zealcook@gmail.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ks8695/include/mach/regs-switch.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-ks8695/include/mach/regs-switch.h b/arch/arm/mach-ks8695/include/mach/regs-switch.h
index 56d12e8de89..97e8acb1cf6 100644
--- a/arch/arm/mach-ks8695/include/mach/regs-switch.h
+++ b/arch/arm/mach-ks8695/include/mach/regs-switch.h
@@ -25,7 +25,7 @@
 #define KS8695_SEC1		(0x04)		/* Switch Engine Control 1 */
 #define KS8695_SEC2		(0x08)		/* Switch Engine Control 2 */
 
-#define KS8695_P(x)_C(z)	(0xc0 + (((x)-1)*3 + ((z)-1))*4)	/* Port Configuration Registers */
+#define KS8695_SEPXCZ(x,z)	(0x0c + (((x)-1)*3 + ((z)-1))*4)	/* Port Configuration Registers */
 
 #define KS8695_SEP12AN		(0x48)		/* Port 1 & 2 Auto-Negotiation */
 #define KS8695_SEP34AN		(0x4c)		/* Port 3 & 4 Auto-Negotiation */
-- 
cgit v1.2.3


From 662aeced1512e008e5613b91de8e8b8e01017cb5 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Wed, 30 Sep 2009 13:02:42 -0700
Subject: [ARM] properly report mv78100 stepping A1

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-mv78xx0/common.c               | 2 ++
 arch/arm/mach-mv78xx0/include/mach/mv78xx0.h | 1 +
 2 files changed, 3 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index 1b22e4af879..08465eb6a2c 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -845,6 +845,8 @@ static char * __init mv78xx0_id(void)
 	} else if (dev == MV78100_DEV_ID) {
 		if (rev == MV78100_REV_A0)
 			return "MV78100-A0";
+		else if (rev == MV78100_REV_A1)
+			return "MV78100-A1";
 		else
 			return "MV78100-Rev-Unsupported";
 	} else if (dev == MV78200_DEV_ID) {
diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
index d715b92b090..788bdace130 100644
--- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
+++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
@@ -112,6 +112,7 @@
 
 #define MV78100_DEV_ID		0x7810
 #define MV78100_REV_A0		1
+#define MV78100_REV_A1		2
 
 #define MV78200_DEV_ID		0x7820
 #define MV78200_REV_A0		1
-- 
cgit v1.2.3


From 5d8965557318fabb1680d1817c2afc2714b6d3ce Mon Sep 17 00:00:00 2001
From: Simon Kagstrom <simon.kagstrom@netinsight.net>
Date: Fri, 9 Oct 2009 08:26:45 +0200
Subject: [ARM] OpenRD base: Initialize PCI express and i2c

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Acked-by: Dieter Kiermaier <dk-arm-linux@gmx.de>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-kirkwood/openrd_base-setup.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-kirkwood/openrd_base-setup.c b/arch/arm/mach-kirkwood/openrd_base-setup.c
index 947dfb8cd5b..77617c72229 100644
--- a/arch/arm/mach-kirkwood/openrd_base-setup.c
+++ b/arch/arm/mach-kirkwood/openrd_base-setup.c
@@ -70,8 +70,20 @@ static void __init openrd_base_init(void)
 	kirkwood_ge00_init(&openrd_base_ge00_data);
 	kirkwood_sata_init(&openrd_base_sata_data);
 	kirkwood_sdio_init(&openrd_base_mvsdio_data);
+
+	kirkwood_i2c_init();
 }
 
+static int __init openrd_base_pci_init(void)
+{
+	if (machine_is_openrd_base())
+		kirkwood_pcie_init();
+
+	return 0;
+ }
+subsys_initcall(openrd_base_pci_init);
+
+
 MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
 	/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
 	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-- 
cgit v1.2.3


From 6de95c198729d34a85c88f8844f1c3d57fb6da00 Mon Sep 17 00:00:00 2001
From: Li Jie <eltshanli@gmail.com>
Date: Thu, 5 Nov 2009 07:29:54 -0800
Subject: [ARM] kirkwood: fix section mismatch

kirkwood_timer_init() and kirkwood_pcie_setup() lack of __init which
causes following warnings:

WARNING: vmlinux.o(.text+0x9568): Section mismatch in reference from
the function kirkwood_timer_init() to the function
.init.text:kirkwood_find_tclk()
The function kirkwood_timer_init() references
the function __init kirkwood_find_tclk().
This is often because kirkwood_timer_init lacks a __init
annotation or the annotation of kirkwood_find_tclk is wrong.

WARNING: vmlinux.o(.text+0x979c): Section mismatch in reference from
the function kirkwood_pcie_setup() to the function
.init.text:orion_pcie_setup()
The function kirkwood_pcie_setup() references
the function __init orion_pcie_setup().
This is often because kirkwood_pcie_setup lacks a __init
annotation or the annotation of orion_pcie_setup is wrong.

Signed-off-by: lijie <eltshanli@gmail.com>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
---
 arch/arm/mach-kirkwood/common.c | 2 +-
 arch/arm/mach-kirkwood/pcie.c   | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 0acb61f3c10..7177c4aa634 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -845,7 +845,7 @@ int __init kirkwood_find_tclk(void)
 	return 166666667;
 }
 
-static void kirkwood_timer_init(void)
+static void __init kirkwood_timer_init(void)
 {
 	kirkwood_tclk = kirkwood_find_tclk();
 	orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index d90b9aae308..55388203300 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -93,7 +93,7 @@ static struct pci_ops pcie_ops = {
 };
 
 
-static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
+static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
 {
 	struct resource *res;
 	extern unsigned int kirkwood_clk_ctrl;
-- 
cgit v1.2.3


From 35f029e2514be209eb0e88c7d927f3bcc42a5cc2 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Sat, 7 Nov 2009 14:49:18 +0100
Subject: [ARM] kirkwood: fix PCI I/O port assignment

Instead of allocating PCI devices I/O port bus addresses from the
000xxxxx I/O port range as intended, due to a bus versus physical
address mixup, the Kirkwood PCIe handling code inadvertently
allocated I/O port bus addresses from the f20xxxxx address range
(which is the physical address range of the PCIe I/O mapping window),
but then direct all I/O port accesses to bus addresses 000xxxxx,
which would then not be decoded at all.

Fix this by setting the base address of the PCIe I/O space struct
resource to KIRKWOOD_PCIE_IO_BUS_BASE instead of the incorrect
KIRKWOOD_PCIE_IO_PHYS_BASE, and fix up __io() to expect addresses
offsetted by the former instead of the latter.

(The suggested fix of directing I/O port accesses from the host to
bus addresses f20xxxxx instead has the problem that assigning full
32bit I/O port bus addresses (f20xxxxx) doesn't work on all PCI
devices, as not all PCI devices implement full 32 bit BAR registers
for I/O ports.  We should really try to allocate I/O port bus
addresses that fit in 16 bits.)

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-kirkwood/include/mach/io.h | 2 +-
 arch/arm/mach-kirkwood/pcie.c            | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-kirkwood/include/mach/io.h b/arch/arm/mach-kirkwood/include/mach/io.h
index a643a846d5f..44e8be04f25 100644
--- a/arch/arm/mach-kirkwood/include/mach/io.h
+++ b/arch/arm/mach-kirkwood/include/mach/io.h
@@ -15,7 +15,7 @@
 
 static inline void __iomem *__io(unsigned long addr)
 {
-	return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_PHYS_BASE)
+	return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_BUS_BASE)
 					+ KIRKWOOD_PCIE_IO_VIRT_BASE);
 }
 
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index 55388203300..0660e78641e 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -115,7 +115,7 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
 	 */
 	res[0].name = "PCIe I/O Space";
 	res[0].flags = IORESOURCE_IO;
-	res[0].start = KIRKWOOD_PCIE_IO_PHYS_BASE;
+	res[0].start = KIRKWOOD_PCIE_IO_BUS_BASE;
 	res[0].end = res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1;
 	if (request_resource(&ioport_resource, &res[0]))
 		panic("Request PCIe IO resource failed\n");
-- 
cgit v1.2.3


From a1897fa67cb964cc6b5a9048a31eb6ef3dcc2dda Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Sat, 7 Nov 2009 14:50:00 +0100
Subject: [ARM] Kirkwood: clarify PCIe MEM bus/physical address distinction

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-kirkwood/addr-map.c              | 2 +-
 arch/arm/mach-kirkwood/include/mach/kirkwood.h | 1 +
 arch/arm/mach-kirkwood/pcie.c                  | 2 +-
 3 files changed, 3 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c
index 1da5d1c18ec..2e69168fc69 100644
--- a/arch/arm/mach-kirkwood/addr-map.c
+++ b/arch/arm/mach-kirkwood/addr-map.c
@@ -105,7 +105,7 @@ void __init kirkwood_setup_cpu_mbus(void)
 	setup_cpu_win(0, KIRKWOOD_PCIE_IO_PHYS_BASE, KIRKWOOD_PCIE_IO_SIZE,
 		      TARGET_PCIE, ATTR_PCIE_IO, KIRKWOOD_PCIE_IO_BUS_BASE);
 	setup_cpu_win(1, KIRKWOOD_PCIE_MEM_PHYS_BASE, KIRKWOOD_PCIE_MEM_SIZE,
-		      TARGET_PCIE, ATTR_PCIE_MEM, -1);
+		      TARGET_PCIE, ATTR_PCIE_MEM, KIRKWOOD_PCIE_MEM_BUS_BASE);
 
 	/*
 	 * Setup window for NAND controller.
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index 54c132731d2..a15cf0ee22b 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -43,6 +43,7 @@
 #define KIRKWOOD_REGS_SIZE		SZ_1M
 
 #define KIRKWOOD_PCIE_MEM_PHYS_BASE	0xe0000000
+#define KIRKWOOD_PCIE_MEM_BUS_BASE	0xe0000000
 #define KIRKWOOD_PCIE_MEM_SIZE		SZ_128M
 
 /*
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index 0660e78641e..a604b2a701a 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -126,7 +126,7 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
 	 */
 	res[1].name = "PCIe Memory Space";
 	res[1].flags = IORESOURCE_MEM;
-	res[1].start = KIRKWOOD_PCIE_MEM_PHYS_BASE;
+	res[1].start = KIRKWOOD_PCIE_MEM_BUS_BASE;
 	res[1].end = res[1].start + KIRKWOOD_PCIE_MEM_SIZE - 1;
 	if (request_resource(&iomem_resource, &res[1]))
 		panic("Request PCIe Memory resource failed\n");
-- 
cgit v1.2.3


From ffbfe093b660ce1c9ede569ebe4f969f9003aa59 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@fluxnic.net>
Date: Sat, 7 Nov 2009 20:36:02 -0500
Subject: [ARM] Kirkwood: update defconfig

Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/configs/kirkwood_defconfig | 260 +++++++++++++++++++++++-------------
 1 file changed, 169 insertions(+), 91 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index af74cc2de8b..bcfade33bca 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -1,15 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc4
-# Mon May  4 11:58:57 2009
+# Linux kernel version: 2.6.32-rc6
+# Sat Nov  7 20:31:18 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,13 +16,12 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -46,11 +43,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=19
 # CONFIG_GROUP_SCHED is not set
@@ -73,7 +71,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -86,6 +83,10 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
@@ -95,13 +96,17 @@ CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
 CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -114,7 +119,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -135,19 +140,22 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -156,25 +164,27 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
 CONFIG_ARCH_KIRKWOOD=y
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_BCMRING is not set
 
 #
 # Marvell Kirkwood Implementations
@@ -185,6 +195,7 @@ CONFIG_MACH_RD88F6281=y
 CONFIG_MACH_MV88F6281GTW_GE=y
 CONFIG_MACH_SHEEVAPLUG=y
 CONFIG_MACH_TS219=y
+CONFIG_MACH_OPENRD_BASE=y
 CONFIG_PLAT_ORION=y
 
 #
@@ -195,7 +206,7 @@ CONFIG_CPU_FEROCEON=y
 # CONFIG_CPU_FEROCEON_OLD_ID is not set
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_FEROCEON=y
 CONFIG_CPU_TLB_FEROCEON=y
@@ -211,6 +222,7 @@ CONFIG_ARM_THUMB=y
 CONFIG_OUTER_CACHE=y
 CONFIG_CACHE_FEROCEON_L2=y
 # CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
 
 #
 # Bus support
@@ -235,11 +247,12 @@ CONFIG_VMSPLIT_3G=y
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -254,10 +267,12 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
+CONFIG_UACCESS_WITH_MEMCPY=y
 
 #
 # Boot options
@@ -345,6 +360,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -367,6 +383,7 @@ CONFIG_NET_DSA_MV88E6123_61_65=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -383,17 +400,18 @@ CONFIG_NET_PKTGEN=m
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
 # CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+CONFIG_CFG80211_DEFAULT_PS_VALUE=1
+# CONFIG_CFG80211_DEBUGFS is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=y
 # CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=y
-
-#
-# Rate control algorithm selection
-#
 CONFIG_MAC80211_RC_MINSTREL=y
 # CONFIG_MAC80211_RC_DEFAULT_PID is not set
 CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
@@ -414,6 +432,7 @@ CONFIG_MAC80211_RC_DEFAULT="minstrel"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -425,9 +444,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
@@ -494,6 +513,7 @@ CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_DATAFLASH is not set
 CONFIG_MTD_M25P80=y
 CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -543,6 +563,7 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -567,10 +588,6 @@ CONFIG_BLK_DEV_SR=m
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -587,6 +604,8 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -595,6 +614,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -611,7 +631,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -623,11 +642,14 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 CONFIG_SATA_AHCI=y
 # CONFIG_SATA_SIL24 is not set
@@ -649,6 +671,7 @@ CONFIG_SATA_MV=y
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -676,6 +699,7 @@ CONFIG_SATA_MV=y
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -693,13 +717,16 @@ CONFIG_SATA_MV=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -768,6 +795,9 @@ CONFIG_NET_PCI=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -789,6 +819,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
@@ -797,10 +828,7 @@ CONFIG_MV643XX_ETH=y
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 CONFIG_WLAN_80211=y
 CONFIG_LIBERTAS=y
@@ -820,9 +848,7 @@ CONFIG_LIBERTAS_SDIO=y
 # CONFIG_MAC80211_HWSIM is not set
 # CONFIG_MWL8K is not set
 # CONFIG_P54_COMMON is not set
-# CONFIG_ATH5K is not set
-# CONFIG_ATH9K is not set
-# CONFIG_AR9170_USB is not set
+# CONFIG_ATH_COMMON is not set
 # CONFIG_IPW2100 is not set
 # CONFIG_IPW2200 is not set
 # CONFIG_IWLWIFI is not set
@@ -832,6 +858,8 @@ CONFIG_LIBERTAS_SDIO=y
 # CONFIG_ZD1211RW is not set
 # CONFIG_RT2X00 is not set
 # CONFIG_HERMES is not set
+# CONFIG_WL12XX is not set
+# CONFIG_IWM is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -855,6 +883,7 @@ CONFIG_LIBERTAS_SDIO=y
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -878,13 +907,19 @@ CONFIG_INPUT_EVDEV=y
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -943,6 +978,7 @@ CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -998,10 +1034,6 @@ CONFIG_I2C_MV64XXX=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -1023,11 +1055,47 @@ CONFIG_SPI_ORION=y
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -1041,33 +1109,28 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1087,7 +1150,6 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1106,10 +1168,12 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
 # CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
 CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
 CONFIG_HID_KENSINGTON=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
@@ -1123,9 +1187,14 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
 # CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=y
+# CONFIG_SMARTJOYPLUS_FF is not set
 CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
 # CONFIG_THRUSTMASTER_FF is not set
+CONFIG_HID_ZEROPLUS=y
 # CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -1150,18 +1219,21 @@ CONFIG_USB_DEVICE_CLASS=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 # CONFIG_USB_WHCI_HCD is not set
 # CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
@@ -1252,11 +1324,14 @@ CONFIG_SDIO_UART=y
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 # CONFIG_MMC_TIFM_SD is not set
 CONFIG_MMC_MVSDIO=y
 # CONFIG_MMC_SPI is not set
+# CONFIG_MMC_CB710 is not set
+# CONFIG_MMC_VIA_SDMMC is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -1266,7 +1341,7 @@ CONFIG_LEDS_CLASS=y
 # CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
 # CONFIG_LEDS_DAC124S085 is not set
 # CONFIG_LEDS_BD2802 is not set
@@ -1278,11 +1353,14 @@ CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 
 #
 # iptables trigger is under Netfilter config (LED target)
 #
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1314,6 +1392,7 @@ CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_DRV_S35390A=y
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1325,6 +1404,7 @@ CONFIG_RTC_DRV_S35390A=y
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1360,8 +1440,11 @@ CONFIG_DMA_ENGINE=y
 # CONFIG_ASYNC_TX_DMA is not set
 # CONFIG_DMATEST is not set
 # CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1379,10 +1462,13 @@ CONFIG_JBD=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1455,7 +1541,6 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1530,6 +1615,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1547,6 +1633,7 @@ CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1567,12 +1654,14 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
@@ -1581,25 +1670,12 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
@@ -1623,7 +1699,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1665,11 +1740,13 @@ CONFIG_CRYPTO_PCBC=m
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1714,6 +1791,7 @@ CONFIG_CRYPTO_ARC4=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_MV_CESA=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 CONFIG_BINARY_PRINTF=y
 
-- 
cgit v1.2.3


From 3293576c6b7104cdac9c2d10d35abd86b02d7264 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@fluxnic.net>
Date: Sat, 7 Nov 2009 20:59:20 -0500
Subject: [ARM] orion5x: update defconfig

Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/configs/orion5x_defconfig | 278 +++++++++++++++++++++++--------------
 1 file changed, 176 insertions(+), 102 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index 9e2385293ec..5383cd0dff5 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -1,15 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc4
-# Mon May  4 14:07:25 2009
+# Linux kernel version: 2.6.32-rc6
+# Sat Nov  7 20:52:21 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,13 +16,12 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -46,11 +43,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -69,7 +67,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -82,6 +79,10 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 # CONFIG_SLUB_DEBUG is not set
@@ -91,13 +92,17 @@ CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
 CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
@@ -109,7 +114,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -130,19 +135,22 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -151,25 +159,27 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
 CONFIG_ARCH_ORION5X=y
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_BCMRING is not set
 
 #
 # Orion Implementations
@@ -187,6 +197,9 @@ CONFIG_MACH_WRT350N_V2=y
 CONFIG_MACH_TS78XX=y
 CONFIG_MACH_MV2120=y
 CONFIG_MACH_EDMINI_V2=y
+CONFIG_MACH_D2NET=y
+CONFIG_MACH_BIGDISK=y
+CONFIG_MACH_NET2BIG=y
 CONFIG_MACH_MSS2=y
 CONFIG_MACH_WNR854T=y
 CONFIG_MACH_RD88F5181L_GE=y
@@ -202,7 +215,7 @@ CONFIG_CPU_FEROCEON=y
 CONFIG_CPU_FEROCEON_OLD_ID=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_FEROCEON=y
 CONFIG_CPU_TLB_FEROCEON=y
@@ -215,7 +228,7 @@ CONFIG_CPU_CP15_MMU=y
 CONFIG_ARM_THUMB=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
 
 #
 # Bus support
@@ -240,11 +253,12 @@ CONFIG_VMSPLIT_3G=y
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -259,12 +273,14 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
 CONFIG_LEDS_CPU=y
 CONFIG_ALIGNMENT_TRAP=y
+CONFIG_UACCESS_WITH_MEMCPY=y
 
 #
 # Boot options
@@ -308,6 +324,7 @@ CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
 # CONFIG_SUSPEND is not set
 # CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
@@ -356,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -378,6 +396,7 @@ CONFIG_NET_DSA_MV88E6123_61_65=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -394,11 +413,15 @@ CONFIG_NET_PKTGEN=m
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -411,6 +434,7 @@ CONFIG_WIRELESS_EXT_SYSFS=y
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -422,9 +446,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
@@ -537,6 +561,7 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
@@ -552,7 +577,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -576,10 +603,6 @@ CONFIG_BLK_DEV_SR=m
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -596,6 +619,8 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -604,6 +629,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -620,7 +646,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -632,11 +657,14 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -658,6 +686,7 @@ CONFIG_SATA_MV=y
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -685,6 +714,7 @@ CONFIG_SATA_MV=y
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -703,13 +733,16 @@ CONFIG_SATA_MV=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -777,6 +810,8 @@ CONFIG_NET_PCI=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -798,6 +833,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
@@ -806,10 +842,7 @@ CONFIG_MV643XX_ETH=y
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -835,6 +868,7 @@ CONFIG_MV643XX_ETH=y
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -855,13 +889,19 @@ CONFIG_INPUT_EVDEV=y
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -912,6 +952,7 @@ CONFIG_HW_RANDOM_TIMERIOMEM=m
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -967,20 +1008,55 @@ CONFIG_I2C_MV64XXX=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
@@ -1030,6 +1106,8 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1041,9 +1119,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -1057,33 +1133,26 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGA_ARB is not set
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1097,7 +1166,6 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1116,10 +1184,11 @@ CONFIG_USB_HID=y
 # CONFIG_HID_CHERRY is not set
 # CONFIG_HID_CHICONY is not set
 # CONFIG_HID_CYPRESS is not set
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 # CONFIG_HID_EZKEY is not set
 # CONFIG_HID_KYE is not set
 # CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 # CONFIG_HID_LOGITECH is not set
 # CONFIG_HID_MICROSOFT is not set
@@ -1130,10 +1199,11 @@ CONFIG_USB_HID=y
 # CONFIG_HID_SAMSUNG is not set
 # CONFIG_HID_SONY is not set
 # CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1160,18 +1230,21 @@ CONFIG_USB_DEVICE_CLASS=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 # CONFIG_USB_WHCI_HCD is not set
 # CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
@@ -1248,7 +1321,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -1258,7 +1330,7 @@ CONFIG_LEDS_CLASS=y
 # CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
 # CONFIG_LEDS_BD2802 is not set
 
@@ -1269,11 +1341,14 @@ CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 
 #
 # iptables trigger is under Netfilter config (LED target)
 #
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1306,6 +1381,7 @@ CONFIG_RTC_DRV_M41T80=y
 CONFIG_RTC_DRV_S35390A=y
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1344,8 +1420,11 @@ CONFIG_DMA_ENGINE=y
 # CONFIG_ASYNC_TX_DMA is not set
 # CONFIG_DMATEST is not set
 # CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1358,10 +1437,10 @@ CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_EXT4_FS=m
-# CONFIG_EXT4DEV_COMPAT is not set
 CONFIG_EXT4_FS_XATTR=y
 # CONFIG_EXT4_FS_POSIX_ACL is not set
 # CONFIG_EXT4_FS_SECURITY is not set
+# CONFIG_EXT4_DEBUG is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_JBD2=m
@@ -1370,10 +1449,13 @@ CONFIG_FS_MBCACHE=m
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1446,7 +1528,6 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1537,6 +1618,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1552,6 +1634,7 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1572,6 +1655,7 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
@@ -1579,6 +1663,7 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_KPROBES_SANITY_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 CONFIG_LATENCYTOP=y
@@ -1587,25 +1672,12 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
@@ -1629,20 +1701,19 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD2=m
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=m
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1670,11 +1741,13 @@ CONFIG_CRYPTO_PCBC=m
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1691,7 +1764,7 @@ CONFIG_CRYPTO_PCBC=m
 #
 # Ciphers
 #
-# CONFIG_CRYPTO_AES is not set
+CONFIG_CRYPTO_AES=y
 # CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_ARC4 is not set
 # CONFIG_CRYPTO_BLOWFISH is not set
@@ -1719,6 +1792,7 @@ CONFIG_CRYPTO_PCBC=m
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_MV_CESA=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 CONFIG_BINARY_PRINTF=y
 
-- 
cgit v1.2.3


From 158bc5af3d49be49c33dc06ff90c4f754c7d4f1b Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@fluxnic.net>
Date: Sat, 7 Nov 2009 07:35:06 +0100
Subject: ARM: 5784/1: fix early boot machine ID mismatch error display

That code was refactored a long time ago, but one particular label
didn't get adjusted properly which broke the listing of supported
machines.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/head-common.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index 885a7214418..b9505aa267c 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -97,7 +97,7 @@ __error_a:
 	bl	printhex8
 	adr	r0, str_a2
 	bl	printascii
-	adr	r3, 3f
+	adr	r3, 4f
 	ldmia	r3, {r4, r5, r6}		@ get machine desc list
 	sub	r4, r3, r4			@ get offset between virt&phys
 	add	r5, r5, r4			@ convert virt addresses to
-- 
cgit v1.2.3


From bfd2e29f04e5f048ea62677811d1244badd6661e Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun, 8 Nov 2009 20:05:28 +0000
Subject: [ARM] Fix test for unimplemented ARM syscalls

The existing test always failed since 'no' was always greater than
0x7ff.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/traps.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 95718a6b50a..1bbda04a538 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -573,7 +573,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
 		   if not implemented, rather than raising SIGILL.  This
 		   way the calling program can gracefully determine whether
 		   a feature is supported.  */
-		if (no <= 0x7ff)
+		if ((no & 0xffff) <= 0x7ff)
 			return -ENOSYS;
 		break;
 	}
-- 
cgit v1.2.3


From a3323b72b964471650a6128de4e10f8e88d47ae1 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Tue, 3 Nov 2009 14:42:04 +0000
Subject: ARM: SMDK6410: Configure GPIO pull up for WM835x IRQ line

When used with the WM1190-EV1 board we can use the internal pull up
resistor of the CPU to provide the required pull for the IRQ line.
Without this interrupts from the WM835x don't work in the default
WM1190-EV1 hardwaer configuration.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6410/mach-smdk6410.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index ea51dbe76e3..9f1a2146262 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -320,6 +320,9 @@ static int __init smdk6410_wm8350_init(struct wm8350 *wm8350)
 {
 	int i;
 
+	/* Configure the IRQ line */
+	s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP);
+
 	/* Instantiate the regulators */
 	for (i = 0; i < ARRAY_SIZE(wm1190_regulators); i++)
 		wm8350_register_regulator(wm8350,
-- 
cgit v1.2.3


From c7a19787195fcc90aabc3a71f29647ba9a443efe Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Tue, 3 Nov 2009 14:42:10 +0000
Subject: ARM: SMDK6410: Allocate more GPIO space for WM1190-EV1

The WM835x has some GPIOs on it, allocate some space so we can use
them with gpiolib.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6410/Kconfig | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig
index 53fc3ff657f..72d4b11b207 100644
--- a/arch/arm/mach-s3c6410/Kconfig
+++ b/arch/arm/mach-s3c6410/Kconfig
@@ -77,6 +77,7 @@ config SMDK6410_WM1190_EV1
 	depends on MACH_SMDK6410
 	select REGULATOR
 	select REGULATOR_WM8350
+	select S3C24XX_GPIO_EXTRA64
 	select MFD_WM8350_I2C
 	select MFD_WM8350_CONFIG_MODE_0
 	select MFD_WM8350_CONFIG_MODE_3
-- 
cgit v1.2.3


From 54489cd46a3a268ed981c681726c6d690883f076 Mon Sep 17 00:00:00 2001
From: Maurus Cuelenaere <mcuelenaere@gmail.com>
Date: Wed, 4 Nov 2009 13:13:29 +0100
Subject: ARM: S3C64XX: Remove duplicate s3c_dma_has_circular() definition for
 S3C64xx.

This patch removes the duplicated s3c_dma_has_circular() definition and so fixes
compilation for S3C64xx.

Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6400/include/mach/dma.h | 5 -----
 1 file changed, 5 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s3c6400/include/mach/dma.h b/arch/arm/mach-s3c6400/include/mach/dma.h
index 004edab2395..1067619f0ba 100644
--- a/arch/arm/mach-s3c6400/include/mach/dma.h
+++ b/arch/arm/mach-s3c6400/include/mach/dma.h
@@ -68,11 +68,6 @@ static __inline__ int s3c_dma_has_circular(void)
 
 #define S3C2410_DMAF_CIRCULAR		(1 << 0)
 
-static inline bool s3c_dma_has_circular(void)
-{
-	return false;
-}
-
 #include <plat/dma.h>
 
 #endif /* __ASM_ARCH_IRQ_H */
-- 
cgit v1.2.3


From b3c5496fbfc2e5f64bb85b142615717850fee980 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Mon, 9 Nov 2009 23:45:47 +0000
Subject: ARM: S3C64XX: Tidy definition and comments in s3c_dma_has_circular()

The recent changes to arch/arm/mach-s3c6400/include/mach/dma.h have
left an out of date comment in there as well as accidentally changing
the type of the function.

Fix the commit 54489cd46a3a268ed981c681726c6d690883f076

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6400/include/mach/dma.h | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s3c6400/include/mach/dma.h b/arch/arm/mach-s3c6400/include/mach/dma.h
index 1067619f0ba..6723860748b 100644
--- a/arch/arm/mach-s3c6400/include/mach/dma.h
+++ b/arch/arm/mach-s3c6400/include/mach/dma.h
@@ -58,12 +58,9 @@ enum dma_ch {
 	DMACH_MAX		/* the end */
 };
 
-static __inline__ int s3c_dma_has_circular(void)
+static __inline__ bool s3c_dma_has_circular(void)
 {
-	/* we will be supporting ciruclar buffers as soon as we have DMA
-	 * engine support.
-	 */
-	return 1;
+	return true;
 }
 
 #define S3C2410_DMAF_CIRCULAR		(1 << 0)
-- 
cgit v1.2.3


From 210012a6cd8770a73d1aa74b742667b462d04511 Mon Sep 17 00:00:00 2001
From: Jassi Brar <jassi.brar@samsung.com>
Date: Thu, 5 Nov 2009 13:44:20 +0900
Subject: ARM: S3C64XX: DMA: Protect buffer pointers while manipulation

Ensure the DMA buffer points are not updated from
another source during the process of enquing a buffer.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
[ben-linux@fluff.org: Updated patch comment]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c64xx/dma.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c
index 266a10745a8..6fa706f0f42 100644
--- a/arch/arm/plat-s3c64xx/dma.c
+++ b/arch/arm/plat-s3c64xx/dma.c
@@ -339,6 +339,7 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id,
 	struct s3c64xx_dma_buff *next;
 	struct s3c64xx_dma_buff *buff;
 	struct pl080s_lli *lli;
+	unsigned long flags;
 	int ret;
 
 	WARN_ON(!chan);
@@ -366,6 +367,8 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id,
 
 	s3c64xx_dma_fill_lli(chan, lli, data, size);
 
+	local_irq_save(flags);
+
 	if ((next = chan->next) != NULL) {
 		struct s3c64xx_dma_buff *end = chan->end;
 		struct pl080s_lli *endlli = end->lli;
@@ -397,6 +400,8 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id,
 		s3c64xx_lli_to_regs(chan, lli);
 	}
 
+	local_irq_restore(flags);
+
 	show_lli(lli);
 
 	dbg_showchan(chan);
-- 
cgit v1.2.3


From 6d0b8627d545aed7d4bcaad2156b6cb95e105715 Mon Sep 17 00:00:00 2001
From: Jassi Brar <jassi.brar@samsung.com>
Date: Thu, 5 Nov 2009 13:44:26 +0900
Subject: ARM: S3C64XX: DMA: Unify callback functions for success/failure

Replace s3c64xx_dma_tcirq and s3c64xx_dma_errirq with the common
s3c64xx_dma_buffdone.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c64xx/dma.c | 34 +++++++++++++---------------------
 1 file changed, 13 insertions(+), 21 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c
index 6fa706f0f42..5a08a86419d 100644
--- a/arch/arm/plat-s3c64xx/dma.c
+++ b/arch/arm/plat-s3c64xx/dma.c
@@ -565,26 +565,11 @@ int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
 
 EXPORT_SYMBOL(s3c2410_dma_free);
 
-
-static void s3c64xx_dma_tcirq(struct s3c64xx_dmac *dmac, int offs)
-{
-	struct s3c2410_dma_chan *chan = dmac->channels + offs;
-
-	/* note, we currently do not bother to work out which buffer
-	 * or buffers have been completed since the last tc-irq. */
-
-	if (chan->callback_fn)
-		(chan->callback_fn)(chan, chan->curr->pw, 0, S3C2410_RES_OK);
-}
-
-static void s3c64xx_dma_errirq(struct s3c64xx_dmac *dmac, int offs)
-{
-	printk(KERN_DEBUG "%s: offs %d\n", __func__, offs);
-}
-
 static irqreturn_t s3c64xx_dma_irq(int irq, void *pw)
 {
 	struct s3c64xx_dmac *dmac = pw;
+	struct s3c2410_dma_chan *chan;
+	enum s3c2410_dma_buffresult res;
 	u32 tcstat, errstat;
 	u32 bit;
 	int offs;
@@ -593,15 +578,22 @@ static irqreturn_t s3c64xx_dma_irq(int irq, void *pw)
 	errstat = readl(dmac->regs + PL080_ERR_STATUS);
 
 	for (offs = 0, bit = 1; offs < 8; offs++, bit <<= 1) {
+
+		if (!(errstat & bit) && !(tcstat & bit))
+			continue;
+
+		chan = dmac->channels + offs;
+		res = S3C2410_RES_ERR;
+
 		if (tcstat & bit) {
 			writel(bit, dmac->regs + PL080_TC_CLEAR);
-			s3c64xx_dma_tcirq(dmac, offs);
+			res = S3C2410_RES_OK;
 		}
 
-		if (errstat & bit) {
-			s3c64xx_dma_errirq(dmac, offs);
+		if (errstat & bit)
 			writel(bit, dmac->regs + PL080_ERR_CLEAR);
-		}
+
+		s3c64xx_dma_bufffdone(chan, chan->curr, res);
 	}
 
 	return IRQ_HANDLED;
-- 
cgit v1.2.3


From 7507f39c57d4a285aea11c379fbc65c2b3f375ef Mon Sep 17 00:00:00 2001
From: Jassi Brar <jassi.brar@samsung.com>
Date: Thu, 5 Nov 2009 13:44:45 +0900
Subject: ARM: S3C64XX: DMA: Make src and dst transfer size same

Some devices don't seem to work if the source and desitnation transfer
widths are not same. For example, SPI dma xfers, with 8bits/word,
don't work without this patch.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c64xx/dma.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c
index 5a08a86419d..a94281bb84d 100644
--- a/arch/arm/plat-s3c64xx/dma.c
+++ b/arch/arm/plat-s3c64xx/dma.c
@@ -151,8 +151,6 @@ static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan,
 		src = chan->dev_addr;
 		dst = data;
 		control0 = PL080_CONTROL_SRC_AHB2;
-		control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT;
-		control0 |= 2 << PL080_CONTROL_DWIDTH_SHIFT;
 		control0 |= PL080_CONTROL_DST_INCR;
 		break;
 
@@ -160,8 +158,6 @@ static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan,
 		src = data;
 		dst = chan->dev_addr;
 		control0 = PL080_CONTROL_DST_AHB2;
-		control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT;
-		control0 |= 2 << PL080_CONTROL_SWIDTH_SHIFT;
 		control0 |= PL080_CONTROL_SRC_INCR;
 		break;
 	default:
@@ -173,6 +169,8 @@ static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan,
 	control1 = size >> chan->hw_width;	/* size in no of xfers */
 	control0 |= PL080_CONTROL_PROT_SYS;	/* always in priv. mode */
 	control0 |= PL080_CONTROL_TC_IRQ_EN;	/* always fire IRQ */
+	control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT;
+	control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT;
 
 	lli->src_addr = src;
 	lli->dst_addr = dst;
-- 
cgit v1.2.3


From 9b08284bf22f438baa2d6b68015ff17ddb431a61 Mon Sep 17 00:00:00 2001
From: Jassi Brar <jassi.brar@samsung.com>
Date: Thu, 5 Nov 2009 13:44:33 +0900
Subject: ARM: S3C64XX: DMA: Callback with correct buffer pointer

buffdone callback should be called per buffer request with pointer
to the latest serviced request.
'next' should point to the one next to currently active.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c64xx/dma.c | 29 ++++++++++++++++++++++++++++-
 1 file changed, 28 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c
index a94281bb84d..7d12eb8fa58 100644
--- a/arch/arm/plat-s3c64xx/dma.c
+++ b/arch/arm/plat-s3c64xx/dma.c
@@ -576,6 +576,7 @@ static irqreturn_t s3c64xx_dma_irq(int irq, void *pw)
 	errstat = readl(dmac->regs + PL080_ERR_STATUS);
 
 	for (offs = 0, bit = 1; offs < 8; offs++, bit <<= 1) {
+		struct s3c64xx_dma_buff *buff;
 
 		if (!(errstat & bit) && !(tcstat & bit))
 			continue;
@@ -591,7 +592,33 @@ static irqreturn_t s3c64xx_dma_irq(int irq, void *pw)
 		if (errstat & bit)
 			writel(bit, dmac->regs + PL080_ERR_CLEAR);
 
-		s3c64xx_dma_bufffdone(chan, chan->curr, res);
+		/* 'next' points to the buffer that is next to the
+		 * currently active buffer.
+		 * For CIRCULAR queues, 'next' will be same as 'curr'
+		 * when 'end' is the active buffer.
+		 */
+		buff = chan->curr;
+		while (buff && buff != chan->next
+				&& buff->next != chan->next)
+			buff = buff->next;
+
+		if (!buff)
+			BUG();
+
+		if (buff == chan->next)
+			buff = chan->end;
+
+		s3c64xx_dma_bufffdone(chan, buff, res);
+
+		/* Update 'next' */
+		buff = chan->next;
+		if (chan->next == chan->end) {
+			chan->next = chan->curr;
+			if (!(chan->flags & S3C2410_DMAF_CIRCULAR))
+				chan->end = NULL;
+		} else {
+			chan->next = buff->next;
+		}
 	}
 
 	return IRQ_HANDLED;
-- 
cgit v1.2.3


From 336b1a3181d81db85c0af3d0c18fe0a04b4d5126 Mon Sep 17 00:00:00 2001
From: Jassi Brar <jassi.brar@samsung.com>
Date: Thu, 5 Nov 2009 13:44:39 +0900
Subject: ARM: S3C64XX: DMA: Free node for non-circular queues

We need to free the buff and lli nodes if the buffer queue is
not CIRCULAR.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c64xx/dma.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c
index 7d12eb8fa58..d554b936fcf 100644
--- a/arch/arm/plat-s3c64xx/dma.c
+++ b/arch/arm/plat-s3c64xx/dma.c
@@ -610,6 +610,12 @@ static irqreturn_t s3c64xx_dma_irq(int irq, void *pw)
 
 		s3c64xx_dma_bufffdone(chan, buff, res);
 
+		/* Free the node and update curr, if non-circular queue */
+		if (!(chan->flags & S3C2410_DMAF_CIRCULAR)) {
+			chan->curr = buff->next;
+			s3c64xx_dma_freebuff(buff);
+		}
+
 		/* Update 'next' */
 		buff = chan->next;
 		if (chan->next == chan->end) {
-- 
cgit v1.2.3


From cc20d42986d5807cbe4f5c7c8e3dab2e59ea0db3 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Mon, 9 Nov 2009 23:53:29 +0000
Subject: ARM: Use a definition for the userspace cmpxchg emulation syscall

Use a definition for the cmpxchg SWI instead of hard-coding the number.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
---
 arch/arm/include/asm/unistd.h | 9 +++++++++
 arch/arm/kernel/entry-armv.S  | 7 ++++---
 arch/arm/kernel/traps.c       | 2 +-
 3 files changed, 14 insertions(+), 4 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index 7020217fc49..4e506d09e5f 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -402,6 +402,15 @@
 #define __ARM_NR_usr32			(__ARM_NR_BASE+4)
 #define __ARM_NR_set_tls		(__ARM_NR_BASE+5)
 
+/*
+ * *NOTE*: This is a ghost syscall private to the kernel.  Only the
+ * __kuser_cmpxchg code in entry-armv.S should be aware of its
+ * existence.  Don't ever use this from user code.
+ */
+#ifdef __KERNEL__
+#define __ARM_NR_cmpxchg		(__ARM_NR_BASE+0x00fff0)
+#endif
+
 /*
  * The following syscalls are obsolete and no longer available for EABI.
  */
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 0022b4d57f8..d2903e3bc86 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -21,6 +21,7 @@
 #include <mach/entry-macro.S>
 #include <asm/thread_notify.h>
 #include <asm/unwind.h>
+#include <asm/unistd.h>
 
 #include "entry-header.S"
 
@@ -908,10 +909,10 @@ __kuser_cmpxchg:				@ 0xffff0fc0
 	 * A special ghost syscall is used for that (see traps.c).
 	 */
 	stmfd	sp!, {r7, lr}
-	mov	r7, #0xff00		@ 0xfff0 into r7 for EABI
-	orr	r7, r7, #0xf0
-	swi	#0x9ffff0
+	ldr	r7, =1f			@ it's 20 bits
+	swi	__ARM_NR_cmpxchg
 	ldmfd	sp!, {r7, pc}
+1:	.word	__ARM_NR_cmpxchg
 
 #elif __LINUX_ARM_ARCH__ < 6
 
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 1bbda04a538..3f361a783f4 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -528,7 +528,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
 	 * __kuser_cmpxchg code in entry-armv.S should be aware of its
 	 * existence.  Don't ever use this from user code.
 	 */
-	case 0xfff0:
+	case NR(cmpxchg):
 	for (;;) {
 		extern void do_DataAbort(unsigned long addr, unsigned int fsr,
 					 struct pt_regs *regs);
-- 
cgit v1.2.3


From ee90732456fe8e75406fdd3cd136a4bfb7ce31f5 Mon Sep 17 00:00:00 2001
From: Tao Hu <taohu@motorola.com>
Date: Tue, 10 Nov 2009 18:55:17 -0800
Subject: omap: Fix race condition in omap dma driver

The bug could cause irq enable bit of one DMA channel is
cleared/set unexpectedly when 2 (or more) drivers are calling
omap_request_dma()/omap_free_dma() simultaneously

Signed-off-by: Fei Yang <AFY095@motorola.com>
Signed-off-by: Tao Hu <taohu@motorola.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/dma.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index b53125f4129..02ed94526aa 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -691,13 +691,16 @@ static inline void disable_lnk(int lch)
 static inline void omap2_enable_irq_lch(int lch)
 {
 	u32 val;
+	unsigned long flags;
 
 	if (!cpu_class_is_omap2())
 		return;
 
+	spin_lock_irqsave(&dma_chan_lock, flags);
 	val = dma_read(IRQENABLE_L0);
 	val |= 1 << lch;
 	dma_write(val, IRQENABLE_L0);
+	spin_unlock_irqrestore(&dma_chan_lock, flags);
 }
 
 int omap_request_dma(int dev_id, const char *dev_name,
@@ -799,10 +802,13 @@ void omap_free_dma(int lch)
 
 	if (cpu_class_is_omap2()) {
 		u32 val;
+
+		spin_lock_irqsave(&dma_chan_lock, flags);
 		/* Disable interrupts */
 		val = dma_read(IRQENABLE_L0);
 		val &= ~(1 << lch);
 		dma_write(val, IRQENABLE_L0);
+		spin_unlock_irqrestore(&dma_chan_lock, flags);
 
 		/* Clear the CSR register and IRQ status register */
 		dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(lch));
-- 
cgit v1.2.3


From 6d1352420901b0a74e6149a891ff4457f7199651 Mon Sep 17 00:00:00 2001
From: Tobias Klauser <tklauser@distanz.ch>
Date: Tue, 10 Nov 2009 18:55:19 -0800
Subject: omap: Use resource_size

Use the resource_size function instead of manually calculating the
resource size. This reduces the chance of introducing off-by-one errors
and actually fixes one in mailbox.c.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/gpmc.c    | 2 +-
 arch/arm/mach-omap2/mailbox.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 15876828db2..f8657568b1b 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -366,7 +366,7 @@ int gpmc_cs_request(int cs, unsigned long size, unsigned long *base)
 	if (r < 0)
 		goto out;
 
-	gpmc_cs_enable_mem(cs, res->start, res->end - res->start + 1);
+	gpmc_cs_enable_mem(cs, res->start, resource_size(res));
 	*base = res->start;
 	gpmc_cs_set_reserved(cs, 1);
 out:
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index c035ad3426d..ef57b38a56a 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -300,7 +300,7 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "invalid mem resource\n");
 		return -ENODEV;
 	}
-	mbox_base = ioremap(res->start, res->end - res->start);
+	mbox_base = ioremap(res->start, resource_size(res));
 	if (!mbox_base)
 		return -ENOMEM;
 
-- 
cgit v1.2.3


From 8561a84f85eccddf46212622f1f18317a220891b Mon Sep 17 00:00:00 2001
From: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Date: Wed, 11 Nov 2009 11:00:03 -0800
Subject: omap: Fix omapfb/lcdc on OMAP1510 broken when PM set

With CONFIG_PM=y, the omapfb/lcdc device on Amstrad Delta, after initially
starting correctly, breaks with the following error messages:

omapfb omapfb: resetting (status 0xffffff96,reset count 1)
...
omapfb omapfb: resetting (status 0xffffff96,reset count 100)
omapfb omapfb: too many reset attempts, giving up.

Looking closer at this I have found that it had been broken almost 2 years ago
with commit 2418996e3b100114edb2ae110d5d4acb928909d2, PM fixes for OMAP1.

The definite reason for broken omapfb/lcdc behavoiur in PM mode
appeared to be ARM_IDLECT1:IDLIF_ARM (bit 6) put into idle regardless of LCD
DMA possibly running. The bit were set based on return value of the
omap_dma_running() function that did not check for dedicated LCD DMA
channel status. The patch below fixes this.

Note that the hardcoded register value will be fixed during the next merge
cycle to use OMAP_LCDC_ defines. Currently the OMAP_LCDC_ defines are local
to drivers/video/omap/lcdc.c, so let's not start moving those right now.

Created against linux-2.6.32-rc6

Tested on Amstrad Delta

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/dma.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 02ed94526aa..68eaae324b6 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -1114,6 +1114,14 @@ int omap_dma_running(void)
 {
 	int lch;
 
+	/*
+	 * On OMAP1510, internal LCD controller will start the transfer
+	 * when it gets enabled, so assume DMA running if LCD enabled.
+	 */
+	if (cpu_is_omap1510())
+		if (omap_readw(0xfffec000 + 0x00) & (1 << 0))
+			return 1;
+
 	/* Check if LCD DMA is running */
 	if (cpu_is_omap16xx())
 		if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN)
-- 
cgit v1.2.3


From 01943244552c6c747050e7d9d3a10ce31030b4e6 Mon Sep 17 00:00:00 2001
From: Janusz Krzysztofik <jkrzysz@tis.icnet.pl>
Date: Wed, 11 Nov 2009 11:00:34 -0800
Subject: omap1: Amstrad Delta defconfig fixes

The patch provides the following fixes:

- keep kernel small enough to boot with standard tools,
- ensure compatibility with both new and legacy distros,
- turn on support for recently added or fixed hardware features.

Created and tested against linux-2.6.32-rc5.

Signed-off-by: Janusz Krzysztofik <jkrzysz@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/configs/ams_delta_defconfig | 24 +++++++++++++++++-------
 1 file changed, 17 insertions(+), 7 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/configs/ams_delta_defconfig b/arch/arm/configs/ams_delta_defconfig
index 764732529ea..e8f7380b67d 100644
--- a/arch/arm/configs/ams_delta_defconfig
+++ b/arch/arm/configs/ams_delta_defconfig
@@ -55,10 +55,10 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
+CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS is not set
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -224,7 +224,7 @@ CONFIG_CPU_CP15_MMU=y
 #
 # Processor Features
 #
-# CONFIG_ARM_THUMB is not set
+CONFIG_ARM_THUMB=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
 CONFIG_CPU_DCACHE_WRITETHROUGH=y
@@ -248,7 +248,7 @@ CONFIG_CPU_DCACHE_WRITETHROUGH=y
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
-# CONFIG_AEABI is not set
+CONFIG_AEABI=y
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -299,7 +299,9 @@ CONFIG_BINFMT_ELF=y
 #
 # Power management options
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_SUSPEND is not set
+CONFIG_PM_RUNTIME=y
 
 #
 # Networking
@@ -670,7 +672,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
 # CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
@@ -784,6 +786,7 @@ CONFIG_I2C_OMAP=y
 #
 # CONFIG_SPI is not set
 # CONFIG_SPI_MASTER is not set
+CONFIG_GPIO_SYSFS=y
 
 #
 # Dallas's 1-wire bus
@@ -820,6 +823,7 @@ CONFIG_LEDS_AMS_DELTA=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 
 #
 # Multimedia devices
@@ -896,7 +900,13 @@ CONFIG_LOGO_LINUX_CLUT224=y
 #
 # Sound
 #
-# CONFIG_SOUND is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_AMS_DELTA=y
 
 #
 # HID Devices
-- 
cgit v1.2.3


From 24de042ca4faa5dc1811d7b6a8b6eefd97ed7577 Mon Sep 17 00:00:00 2001
From: Grazvydas Ignotas <notasas@gmail.com>
Date: Wed, 11 Nov 2009 11:00:35 -0800
Subject: omap3: pandora: Fix keypad keymap

The original TWL4030 keypad driver from linux-omap used KEY()
macro defined as (col, row), but while it was merged upstream
it was changed to use matrix keypad infrastructure, which uses
(row, col) format. Update the keymap in board file to match
layout of mainline driver.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-omap3pandora.c | 78 ++++++++++++++++----------------
 1 file changed, 39 insertions(+), 39 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 5326e0d6159..7519edb6915 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -134,50 +134,50 @@ static void __init pandora_keys_gpio_init(void)
 }
 
 static int board_keymap[] = {
-	/* col, row, code */
+	/* row, col, code */
 	KEY(0, 0, KEY_9),
-	KEY(0, 1, KEY_0),
-	KEY(0, 2, KEY_BACKSPACE),
-	KEY(0, 3, KEY_O),
-	KEY(0, 4, KEY_P),
-	KEY(0, 5, KEY_K),
-	KEY(0, 6, KEY_L),
-	KEY(0, 7, KEY_ENTER),
-	KEY(1, 0, KEY_8),
+	KEY(0, 1, KEY_8),
+	KEY(0, 2, KEY_I),
+	KEY(0, 3, KEY_J),
+	KEY(0, 4, KEY_N),
+	KEY(0, 5, KEY_M),
+	KEY(1, 0, KEY_0),
 	KEY(1, 1, KEY_7),
-	KEY(1, 2, KEY_6),
-	KEY(1, 3, KEY_5),
-	KEY(1, 4, KEY_4),
-	KEY(1, 5, KEY_3),
-	KEY(1, 6, KEY_2),
-	KEY(1, 7, KEY_1),
-	KEY(2, 0, KEY_I),
-	KEY(2, 1, KEY_U),
+	KEY(1, 2, KEY_U),
+	KEY(1, 3, KEY_H),
+	KEY(1, 4, KEY_B),
+	KEY(1, 5, KEY_SPACE),
+	KEY(2, 0, KEY_BACKSPACE),
+	KEY(2, 1, KEY_6),
 	KEY(2, 2, KEY_Y),
-	KEY(2, 3, KEY_T),
-	KEY(2, 4, KEY_R),
-	KEY(2, 5, KEY_E),
-	KEY(2, 6, KEY_W),
-	KEY(2, 7, KEY_Q),
-	KEY(3, 0, KEY_J),
-	KEY(3, 1, KEY_H),
-	KEY(3, 2, KEY_G),
+	KEY(2, 3, KEY_G),
+	KEY(2, 4, KEY_V),
+	KEY(2, 5, KEY_FN),
+	KEY(3, 0, KEY_O),
+	KEY(3, 1, KEY_5),
+	KEY(3, 2, KEY_T),
 	KEY(3, 3, KEY_F),
-	KEY(3, 4, KEY_D),
-	KEY(3, 5, KEY_S),
-	KEY(3, 6, KEY_A),
-	KEY(3, 7, KEY_LEFTSHIFT),
-	KEY(4, 0, KEY_N),
-	KEY(4, 1, KEY_B),
-	KEY(4, 2, KEY_V),
-	KEY(4, 3, KEY_C),
+	KEY(3, 4, KEY_C),
+	KEY(4, 0, KEY_P),
+	KEY(4, 1, KEY_4),
+	KEY(4, 2, KEY_R),
+	KEY(4, 3, KEY_D),
 	KEY(4, 4, KEY_X),
-	KEY(4, 5, KEY_Z),
-	KEY(4, 6, KEY_DOT),
-	KEY(4, 7, KEY_COMMA),
-	KEY(5, 0, KEY_M),
-	KEY(5, 1, KEY_SPACE),
-	KEY(5, 2, KEY_FN),
+	KEY(5, 0, KEY_K),
+	KEY(5, 1, KEY_3),
+	KEY(5, 2, KEY_E),
+	KEY(5, 3, KEY_S),
+	KEY(5, 4, KEY_Z),
+	KEY(6, 0, KEY_L),
+	KEY(6, 1, KEY_2),
+	KEY(6, 2, KEY_W),
+	KEY(6, 3, KEY_A),
+	KEY(6, 4, KEY_DOT),
+	KEY(7, 0, KEY_ENTER),
+	KEY(7, 1, KEY_1),
+	KEY(7, 2, KEY_Q),
+	KEY(7, 3, KEY_LEFTSHIFT),
+	KEY(7, 4, KEY_COMMA),
 };
 
 static struct matrix_keymap_data board_map_data = {
-- 
cgit v1.2.3


From e9840dc00468c4d2ca63b9f80038533d0f931d16 Mon Sep 17 00:00:00 2001
From: Jarkko Nikula <jhnikula@gmail.com>
Date: Wed, 11 Nov 2009 11:00:36 -0800
Subject: omap3: beagle: Fix USB host port power control

The host port power is enabled by driving the nEN_USB_PWR low as stated in
the comment. This fix is originally from Steve Sakoman <steve@sakoman.com>.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Cc: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-omap3beagle.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 70df6b4dbcd..08b0816afa6 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -162,7 +162,7 @@ static int beagle_twl_gpio_setup(struct device *dev,
 
 	/* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
 	gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
-	gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1);
+	gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
 
 	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
 	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
-- 
cgit v1.2.3


From b30dcf5f37023d591caee80c233bf33706bc5a21 Mon Sep 17 00:00:00 2001
From: Sergio Aguirre <saaguirre@ti.com>
Date: Wed, 11 Nov 2009 11:00:37 -0800
Subject: omap3: 3430sdp: Enable Linux Regulator framework

Some drivers have dependencies on this, and therefore should be
enabled.

Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/configs/omap_3430sdp_defconfig | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/configs/omap_3430sdp_defconfig b/arch/arm/configs/omap_3430sdp_defconfig
index 8a4a7e2ba87..5a305f01530 100644
--- a/arch/arm/configs/omap_3430sdp_defconfig
+++ b/arch/arm/configs/omap_3430sdp_defconfig
@@ -1703,7 +1703,14 @@ CONFIG_RTC_DRV_TWL4030=y
 # on-CPU RTC drivers
 #
 # CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_TWL4030=y
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
-- 
cgit v1.2.3


From 1ea6e6652a63f5db18d753d6a2c963d966b6d9c2 Mon Sep 17 00:00:00 2001
From: Grazvydas Ignotas <notasas@gmail.com>
Date: Wed, 11 Nov 2009 11:00:38 -0800
Subject: omap3: update Pandora defconfig

This patch updates defconfig to enable options needed to properly
boot OMAP3 pandora board. It also enables MMC, OTG, GPIO LEDs,
TWL4030 GPIO and sound drivers.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/configs/omap3_pandora_defconfig | 49 ++++++++++++++++++++++++++++----
 1 file changed, 44 insertions(+), 5 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/configs/omap3_pandora_defconfig b/arch/arm/configs/omap3_pandora_defconfig
index b54ad2e2da3..150deafb0a6 100644
--- a/arch/arm/configs/omap3_pandora_defconfig
+++ b/arch/arm/configs/omap3_pandora_defconfig
@@ -611,7 +611,7 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_KEYBOARD_GPIO=y
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
@@ -634,7 +634,8 @@ CONFIG_TOUCHSCREEN_ADS7846=y
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_TWL4030_PWRBUTTON=y
 
 #
 # Hardware I/O ports
@@ -834,7 +835,29 @@ CONFIG_DAB=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DRIVERS=y
+CONFIG_SND_USB=y
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_MCBSP=y
+CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+CONFIG_SND_SOC_TWL4030=y
+
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
@@ -1020,7 +1043,13 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_MMC_SPI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1084,9 +1113,12 @@ CONFIG_RTC_DRV_TWL4030=y
 # on-CPU RTC drivers
 #
 # CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
 
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_TWL4030=y
+
 #
 # File systems
 #
@@ -1407,3 +1439,10 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+
+# added by hand for now
+CONFIG_KEYBOARD_TWL4030=y
+CONFIG_USB_OTG_UTILS=y
+CONFIG_TWL4030_USB=y
+CONFIG_MMC_OMAP_HS=y
+
-- 
cgit v1.2.3


From b029839cf1f3aa095de73aa2acc241f1c65201ab Mon Sep 17 00:00:00 2001
From: Mike Turquette <mturquette@gmail.com>
Date: Wed, 11 Nov 2009 11:00:38 -0800
Subject: omap3: Decrease cpufreq transition latency

Adjust OMAP3 frequency transition latency from 10,000,000uS to a more
reasonable 300,000uS.  This causes ondemand and conservative governors to
sample CPU load more often resulting in more responsive behavior.

Tested on Android 2.6.29; using this value and conservative governor, CORE
power consumption on Zoom2 was comparable to the old and unresponsive
10,000,000uS value while UI responsiveness was greatly improved.

Signed-off-by: Mike Turquette <mturquette@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/cpu-omap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c
index 1868c0d8f9b..341235c278a 100644
--- a/arch/arm/plat-omap/cpu-omap.c
+++ b/arch/arm/plat-omap/cpu-omap.c
@@ -127,7 +127,7 @@ static int __init omap_cpu_init(struct cpufreq_policy *policy)
 	}
 
 	/* FIXME: what's the actual transition time? */
-	policy->cpuinfo.transition_latency = 10 * 1000 * 1000;
+	policy->cpuinfo.transition_latency = 300 * 1000;
 
 	return 0;
 }
-- 
cgit v1.2.3


From b2b36316626f0d6b92c3675a2aa2726efc71d146 Mon Sep 17 00:00:00 2001
From: Marc Zyngier <maz@misterjones.org>
Date: Thu, 5 Nov 2009 08:10:10 +0100
Subject: [ARM] pxa: fix interrupts number calculation when
 CONFIG_PXA_HAVE_ISA_IRQS=y

Commit d2c37068429b29d6549cf3486fc84b836689e122 ([ARM] pxa:
initialize default interrupt priority and use ICHP for IRQ handling)
broke ISA interrupt support on pxa27x/3xx.

In such a case, PXA_IRQ(0) != 0, and the IRQ number computed from
ICHP must be offset by PXA_IRQ(0).

Tested on an Arcom Zeus (pxa270), with both CONFIG_PXA_HAVE_ISA_IRQS
enabled and disabled.

Signed-off-by: Marc Zyngier <maz@misterjones.org>
Tested-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/include/mach/entry-macro.S | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/include/mach/entry-macro.S b/arch/arm/mach-pxa/include/mach/entry-macro.S
index 241880608ac..a73bc86a3c2 100644
--- a/arch/arm/mach-pxa/include/mach/entry-macro.S
+++ b/arch/arm/mach-pxa/include/mach/entry-macro.S
@@ -46,5 +46,6 @@
 		beq	1001f
 		bic	\irqstat, \irqstat, #0x80000000
 		mov	\irqnr, \irqstat, lsr #16
+		add	\irqnr, \irqnr, #(PXA_IRQ(0))
 1001:
 		.endm
-- 
cgit v1.2.3


From 2b5e080ae946b4a346b842a73d80f319b7a6453c Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Wed, 21 Oct 2009 13:25:50 +0200
Subject: [ARM] pxa: fix missing underscores in mfp-pxa910.h

Underscores were missing.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-mmp/include/mach/mfp-pxa910.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h
index bf1189ff9a3..7e8a80f25dd 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h
+++ b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h
@@ -160,7 +160,7 @@
 #define MMC1_WP_MMC1_WP		MFP_CFG_DRV(MMC1_WP, AF0, MEDIUM)
 
 /* PWM */
-#define GPIO27 PWM3 AF2		MFP_CFG(GPIO27, AF2)
+#define GPIO27_PWM3_AF2		MFP_CFG(GPIO27, AF2)
 #define GPIO51_PWM2_OUT		MFP_CFG(GPIO51, AF2)
 #define GPIO117_PWM1_OUT	MFP_CFG(GPIO117, AF2)
 #define GPIO118_PWM2_OUT	MFP_CFG(GPIO118, AF2)
-- 
cgit v1.2.3


From 15f593cfcb1178f832aaf9ec0200acd8c3c3348c Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Sun, 8 Nov 2009 03:05:11 +0100
Subject: [ARM] pxa/colibri: fix AC97 ifdefs and add missing include

The AC97 part wasn't initialized on Colibri/PXA320 because the macros
were wrong. Also, the code didn't compile because of a header file not
being included.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/colibri-pxa320.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index 494572825c7..ec0e14b9668 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -27,6 +27,7 @@
 #include <mach/colibri.h>
 #include <mach/pxafb.h>
 #include <mach/ohci.h>
+#include <mach/audio.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -145,7 +146,8 @@ static void __init colibri_pxa320_init_lcd(void)
 static inline void colibri_pxa320_init_lcd(void) {}
 #endif
 
-#if defined(SND_AC97_CODEC) || defined(SND_AC97_CODEC_MODULE)
+#if	defined(CONFIG_SND_AC97_CODEC) || \
+	defined(CONFIG_SND_AC97_CODEC_MODULE)
 static mfp_cfg_t colibri_pxa320_ac97_pin_config[] __initdata = {
 	GPIO34_AC97_SYSCLK,
 	GPIO35_AC97_SDATA_IN_0,
-- 
cgit v1.2.3


From 9da4ea69f28cf2bd20be86eda34afbc03c2180c7 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.y.miao@gmail.com>
Date: Fri, 13 Nov 2009 16:44:14 +0800
Subject: [ARM] pxa: fix incorrect mfp_to_gpio() conversion

Since MFP_PIN_GPIO* now includes 128-255, mfp_to_gpio() is no longer
valid for those additional pins, fix it.

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/plat-pxa/include/plat/mfp.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h
index 22086e696e8..857a6839071 100644
--- a/arch/arm/plat-pxa/include/plat/mfp.h
+++ b/arch/arm/plat-pxa/include/plat/mfp.h
@@ -16,7 +16,7 @@
 #ifndef __ASM_PLAT_MFP_H
 #define __ASM_PLAT_MFP_H
 
-#define mfp_to_gpio(m)	((m) % 128)
+#define mfp_to_gpio(m)	((m) % 256)
 
 /* list of all the configurable MFP pins */
 enum {
-- 
cgit v1.2.3


From 2bf30108435339c4cf149f9d279d0dc961345393 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Thu, 12 Nov 2009 20:31:14 +0100
Subject: [ARM] Kirkwood: disable propagation of mbus error to the CPU local
 bus

Disable propagation of mbus errors to the CPU local bus, as this causes
mbus errors (which can occur for example for PCI aborts) to throw CPU
aborts, which we're not set up to deal with.

Reported-by: Dieter Kiermaier <dk-arm-linux@gmx.de>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-kirkwood/common.c                   | 8 ++++++++
 arch/arm/mach-kirkwood/include/mach/bridge-regs.h | 3 +++
 2 files changed, 11 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 7177c4aa634..242dd077534 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -915,6 +915,14 @@ void __init kirkwood_init(void)
 	kirkwood_uart0_data[0].uartclk = kirkwood_tclk;
 	kirkwood_uart1_data[0].uartclk = kirkwood_tclk;
 
+	/*
+	 * Disable propagation of mbus errors to the CPU local bus,
+	 * as this causes mbus errors (which can occur for example
+	 * for PCI aborts) to throw CPU aborts, which we're not set
+	 * up to deal with.
+	 */
+	writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
+
 	kirkwood_setup_cpu_mbus();
 
 #ifdef CONFIG_CACHE_FEROCEON_L2
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
index 9e80d9232c8..418f5017c50 100644
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
@@ -13,6 +13,9 @@
 
 #include <mach/kirkwood.h>
 
+#define CPU_CONFIG		(BRIDGE_VIRT_BASE | 0x0100)
+#define CPU_CONFIG_ERROR_PROP	0x00000004
+
 #define CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
 #define CPU_RESET		0x00000002
 
-- 
cgit v1.2.3


From 0f74296a0f818d8ae52d9b77ec531e8dd804dda3 Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Tue, 20 Oct 2009 16:32:53 +0200
Subject: at91: at91sam9g20ek modify dual slot evaluation kit

at91sam9g20ek rev. C and onwards embed two SD/MMC slots. This patch modify the
previous dual slot board definition to match the official rev. C board. It also
allows the use of at91_mci SD/MMC driver in addition to the atmel-mci one.

Some pins have been re-affected from leds or Ethernet phy IRQ to the SD/MMC
slot A. This lead to a modification of those definitions.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
---
 arch/arm/mach-at91/Kconfig                     | 20 +++++++++++---------
 arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c | 23 +++++++++++++++--------
 2 files changed, 26 insertions(+), 17 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index e35d54d43e7..2fd88437348 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -289,13 +289,6 @@ config MACH_NEOCORE926
 	help
 	  Select this if you are using the Adeneo Neocore 926 board.
 
-config MACH_AT91SAM9G20EK_2MMC
-	bool "Atmel AT91SAM9G20-EK Evaluation Kit modified for 2 MMC Slots"
-	depends on ARCH_AT91SAM9G20
-	help
-	  Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
-	  Rev A or B modified for 2 MMC Slots.
-
 endif
 
 # ----------------------------------------------------------
@@ -322,7 +315,16 @@ config MACH_AT91SAM9G20EK
 	bool "Atmel AT91SAM9G20-EK Evaluation Kit"
 	depends on ARCH_AT91SAM9G20
 	help
-	  Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit.
+	  Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
+	  that embeds only one SD/MMC slot.
+
+config MACH_AT91SAM9G20EK_2MMC
+	bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
+	depends on ARCH_AT91SAM9G20
+	help
+	  Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
+	  with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
+	  onwards.
 
 config MACH_CPU9G20
 	bool "Eukrea CPU9G20 board"
@@ -392,7 +394,7 @@ config MTD_AT91_DATAFLASH_CARD
 
 config MTD_NAND_ATMEL_BUSWIDTH_16
 	bool "Enable 16-bit data bus interface to NAND flash"
-	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
+	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G20EK_2MMC || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
 	help
 	  On AT91SAM926x boards both types of NAND flash can be present
 	  (8 and 16 bit data bus width).
diff --git a/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c b/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c
index a28e53faf71..a4102d72cc9 100644
--- a/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c
+++ b/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c
@@ -90,7 +90,7 @@ static struct at91_udc_data __initdata ek_udc_data = {
  * SPI devices.
  */
 static struct spi_board_info ek_spi_devices[] = {
-#if !defined(CONFIG_MMC_ATMELMCI)
+#if !(defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_AT91))
 	{	/* DataFlash chip */
 		.modalias	= "mtd_dataflash",
 		.chip_select	= 1,
@@ -113,7 +113,7 @@ static struct spi_board_info ek_spi_devices[] = {
  * MACB Ethernet device
  */
 static struct at91_eth_data __initdata ek_macb_data = {
-	.phy_irq_pin	= AT91_PIN_PC12,
+	.phy_irq_pin	= AT91_PIN_PB0,
 	.is_rmii	= 1,
 };
 
@@ -194,24 +194,27 @@ static void __init ek_add_device_nand(void)
 
 /*
  * MCI (SD/MMC)
- * det_pin and wp_pin are not connected
+ * wp_pin is not connected
  */
 #if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
 static struct mci_platform_data __initdata ek_mmc_data = {
 	.slot[0] = {
 		.bus_width	= 4,
-		.detect_pin	= -ENODEV,
+		.detect_pin	= AT91_PIN_PC2,
 		.wp_pin		= -ENODEV,
 	},
 	.slot[1] = {
 		.bus_width	= 4,
-		.detect_pin	= -ENODEV,
+		.detect_pin	= AT91_PIN_PC9,
 		.wp_pin		= -ENODEV,
 	},
 
 };
 #else
-static struct amci_platform_data __initdata ek_mmc_data = {
+static struct at91_mmc_data __initdata ek_mmc_data = {
+	.slot_b		= 1,	/* Only one slot so use slot B */
+	.wire4		= 1,
+	.det_pin	= AT91_PIN_PC9,
 };
 #endif
 
@@ -221,13 +224,13 @@ static struct amci_platform_data __initdata ek_mmc_data = {
 static struct gpio_led ek_leds[] = {
 	{	/* "bottom" led, green, userled1 to be defined */
 		.name			= "ds5",
-		.gpio			= AT91_PIN_PB12,
+		.gpio			= AT91_PIN_PB8,
 		.active_low		= 1,
 		.default_trigger	= "none",
 	},
 	{	/* "power" led, yellow */
 		.name			= "ds1",
-		.gpio			= AT91_PIN_PB13,
+		.gpio			= AT91_PIN_PB9,
 		.default_trigger	= "heartbeat",
 	}
 };
@@ -254,7 +257,11 @@ static void __init ek_board_init(void)
 	/* Ethernet */
 	at91_add_device_eth(&ek_macb_data);
 	/* MMC */
+#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
 	at91_add_device_mci(0, &ek_mmc_data);
+#else
+	at91_add_device_mmc(0, &ek_mmc_data);
+#endif
 	/* I2C */
 	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
 	/* LEDs */
-- 
cgit v1.2.3


From 378ce74bee4cb0183489bc0f850790a2264ca975 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Sat, 14 Nov 2009 01:03:24 +0100
Subject: ARM: 5787/1: U300 COH 901 331 fixes

This will fix some small issues with the COH 901 331 RTC driver:
- Interrupt is disabled after alarm so that we don't fire
  multiple interrupts.
- We return 0 from the coh901331_alarm_irq_enable() ridding
  a compile warning.
- We alter the name in the U300 device registry to match that
  of the driver so they sucessfully resolve.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-u300/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index be60d6deee8..653e25be3dd 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -408,7 +408,7 @@ static struct platform_device keypad_device = {
 };
 
 static struct platform_device rtc_device = {
-	.name = "rtc0",
+	.name = "rtc-coh901331",
 	.id = -1,
 	.num_resources = ARRAY_SIZE(rtc_resources),
 	.resource = rtc_resources,
-- 
cgit v1.2.3


From 10d5d99e880692a31ddc59b9f5d063e928fc0c89 Mon Sep 17 00:00:00 2001
From: Paul Parsons <lost.distance@yahoo.com>
Date: Sat, 14 Nov 2009 16:54:12 +0000
Subject: [ARM] pxa/hx4700: fix hx4700 touchscreen pressure values

hx4700 touchscreen events were being dropped in ads7846_rx() because their
pressure values consistently exceeded the platform maximum of 512; a sample
of 256 pressure values were in the range 531 to 815.  Doubling the platform
maximum to 1024 allows hx4700 touchscreen events to pass the test.

Signed-off-by: Paul Parsons <lost.distance@yahoo.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/hx4700.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index abff9e13274..83bd3c6e388 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -604,7 +604,7 @@ static struct platform_device gpio_vbus = {
 static const struct ads7846_platform_data tsc2046_info = {
 	.model            = 7846,
 	.vref_delay_usecs = 100,
-	.pressure_max     = 512,
+	.pressure_max     = 1024,
 	.debounce_max     = 10,
 	.debounce_tol     = 3,
 	.debounce_rep     = 1,
-- 
cgit v1.2.3


From 7df56c2586049a06b007474ca059779c81ddb1ff Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Fri, 13 Nov 2009 11:37:34 +0100
Subject: [ARM] pxa: ensure mfp is in correct range in mfp_{read,write}

Ensure we do not read/write outside array boundaries with a negative index.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/plat-pxa/mfp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c
index 9405d0379c8..be58f9fe65b 100644
--- a/arch/arm/plat-pxa/mfp.c
+++ b/arch/arm/plat-pxa/mfp.c
@@ -207,7 +207,7 @@ unsigned long mfp_read(int mfp)
 {
 	unsigned long val, flags;
 
-	BUG_ON(mfp >= MFP_PIN_MAX);
+	BUG_ON(mfp < 0 || mfp >= MFP_PIN_MAX);
 
 	spin_lock_irqsave(&mfp_spin_lock, flags);
 	val = mfpr_readl(mfp_table[mfp].mfpr_off);
@@ -220,7 +220,7 @@ void mfp_write(int mfp, unsigned long val)
 {
 	unsigned long flags;
 
-	BUG_ON(mfp >= MFP_PIN_MAX);
+	BUG_ON(mfp < 0 || mfp >= MFP_PIN_MAX);
 
 	spin_lock_irqsave(&mfp_spin_lock, flags);
 	mfpr_writel(mfp_table[mfp].mfpr_off, val);
-- 
cgit v1.2.3


From f7343deb0f6e7654c60e97606aea388b9da612c2 Mon Sep 17 00:00:00 2001
From: Vimal Singh <vimalsingh@ti.com>
Date: Mon, 16 Nov 2009 14:55:59 -0800
Subject: omap: Fix keymap for zoom2 according to matrix keypad framwork

Interpretation of 'row' and 'col' got reversed in matrix keymap
framework. Also last element '0', present in keymap array, is no
more needed.
Correcting zoom2 keyboard keymap accordingly.

Signed-off-by: Vimal Singh <vimalsingh@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-zoom2.c | 87 +++++++++++++++++++--------------------
 1 file changed, 43 insertions(+), 44 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index ea00486a5e5..51e0b3ba5f3 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -30,57 +30,56 @@
 /* Zoom2 has Qwerty keyboard*/
 static int board_keymap[] = {
 	KEY(0, 0, KEY_E),
-	KEY(1, 0, KEY_R),
-	KEY(2, 0, KEY_T),
-	KEY(3, 0, KEY_HOME),
-	KEY(6, 0, KEY_I),
-	KEY(7, 0, KEY_LEFTSHIFT),
-	KEY(0, 1, KEY_D),
+	KEY(0, 1, KEY_R),
+	KEY(0, 2, KEY_T),
+	KEY(0, 3, KEY_HOME),
+	KEY(0, 6, KEY_I),
+	KEY(0, 7, KEY_LEFTSHIFT),
+	KEY(1, 0, KEY_D),
 	KEY(1, 1, KEY_F),
-	KEY(2, 1, KEY_G),
-	KEY(3, 1, KEY_SEND),
-	KEY(6, 1, KEY_K),
-	KEY(7, 1, KEY_ENTER),
-	KEY(0, 2, KEY_X),
-	KEY(1, 2, KEY_C),
+	KEY(1, 2, KEY_G),
+	KEY(1, 3, KEY_SEND),
+	KEY(1, 6, KEY_K),
+	KEY(1, 7, KEY_ENTER),
+	KEY(2, 0, KEY_X),
+	KEY(2, 1, KEY_C),
 	KEY(2, 2, KEY_V),
-	KEY(3, 2, KEY_END),
-	KEY(6, 2, KEY_DOT),
-	KEY(7, 2, KEY_CAPSLOCK),
-	KEY(0, 3, KEY_Z),
-	KEY(1, 3, KEY_KPPLUS),
-	KEY(2, 3, KEY_B),
+	KEY(2, 3, KEY_END),
+	KEY(2, 6, KEY_DOT),
+	KEY(2, 7, KEY_CAPSLOCK),
+	KEY(3, 0, KEY_Z),
+	KEY(3, 1, KEY_KPPLUS),
+	KEY(3, 2, KEY_B),
 	KEY(3, 3, KEY_F1),
-	KEY(6, 3, KEY_O),
-	KEY(7, 3, KEY_SPACE),
-	KEY(0, 4, KEY_W),
-	KEY(1, 4, KEY_Y),
-	KEY(2, 4, KEY_U),
-	KEY(3, 4, KEY_F2),
+	KEY(3, 6, KEY_O),
+	KEY(3, 7, KEY_SPACE),
+	KEY(4, 0, KEY_W),
+	KEY(4, 1, KEY_Y),
+	KEY(4, 2, KEY_U),
+	KEY(4, 3, KEY_F2),
 	KEY(4, 4, KEY_VOLUMEUP),
-	KEY(6, 4, KEY_L),
-	KEY(7, 4, KEY_LEFT),
-	KEY(0, 5, KEY_S),
-	KEY(1, 5, KEY_H),
-	KEY(2, 5, KEY_J),
-	KEY(3, 5, KEY_F3),
+	KEY(4, 6, KEY_L),
+	KEY(4, 7, KEY_LEFT),
+	KEY(5, 0, KEY_S),
+	KEY(5, 1, KEY_H),
+	KEY(5, 2, KEY_J),
+	KEY(5, 3, KEY_F3),
 	KEY(5, 5, KEY_VOLUMEDOWN),
-	KEY(6, 5, KEY_M),
-	KEY(4, 5, KEY_ENTER),
-	KEY(7, 5, KEY_RIGHT),
-	KEY(0, 6, KEY_Q),
-	KEY(1, 6, KEY_A),
-	KEY(2, 6, KEY_N),
-	KEY(3, 6, KEY_BACKSPACE),
+	KEY(5, 6, KEY_M),
+	KEY(5, 7, KEY_ENTER),
+	KEY(6, 0, KEY_Q),
+	KEY(6, 1, KEY_A),
+	KEY(6, 2, KEY_N),
+	KEY(6, 3, KEY_BACKSPACE),
 	KEY(6, 6, KEY_P),
-	KEY(7, 6, KEY_UP),
 	KEY(6, 7, KEY_SELECT),
-	KEY(7, 7, KEY_DOWN),
-	KEY(0, 7, KEY_PROG1),	/*MACRO 1 <User defined> */
-	KEY(1, 7, KEY_PROG2),	/*MACRO 2 <User defined> */
-	KEY(2, 7, KEY_PROG3),	/*MACRO 3 <User defined> */
-	KEY(3, 7, KEY_PROG4),	/*MACRO 4 <User defined> */
-	0
+	KEY(7, 0, KEY_PROG1),	/*MACRO 1 <User defined> */
+	KEY(7, 1, KEY_PROG2),	/*MACRO 2 <User defined> */
+	KEY(7, 2, KEY_PROG3),	/*MACRO 3 <User defined> */
+	KEY(7, 3, KEY_PROG4),	/*MACRO 4 <User defined> */
+	KEY(7, 5, KEY_RIGHT),
+	KEY(7, 6, KEY_UP),
+	KEY(7, 7, KEY_DOWN)
 };
 
 static struct matrix_keymap_data board_map_data = {
-- 
cgit v1.2.3


From 9346f48b26a4b48a7d56314bbb94e6b801e28316 Mon Sep 17 00:00:00 2001
From: Rajendra Nayak <rnayak@ti.com>
Date: Mon, 16 Nov 2009 13:36:53 +0000
Subject: omap3: clock: Fix the DPLL freqsel computations

Fix the freqsel value computation. Use n instead of (n+1)

The formula in the TRM uses a zero-based N, hence the (n+1); however
at this point in the clock34xx.c code, N is one-based.

Hayati Bayrakdar <h-bayrakdar@ti.com> and Nishanth Menon <nm@ti.com> helped
track down this bug.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
[paul@pwsan.com: modified commit message]
Cc: Hayati Bayrakdar <h-bayrakdar@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/clock34xx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 489556eecbd..7c5c00df3c7 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -473,7 +473,7 @@ static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n)
 	unsigned long fint;
 	u16 f = 0;
 
-	fint = clk->dpll_data->clk_ref->rate / (n + 1);
+	fint = clk->dpll_data->clk_ref->rate / n;
 
 	pr_debug("clock: fint is %lu\n", fint);
 
-- 
cgit v1.2.3


From 72f962fc7bc00f5ff4991912b889f87b464f7f1a Mon Sep 17 00:00:00 2001
From: Tero Kristo <tero.kristo@nokia.com>
Date: Mon, 16 Nov 2009 13:36:54 +0000
Subject: omap3: clock: Fixed dpll3_m2x2 rate calculation

Current calculation does not take into account any changes to M2 divisor, and
thus when we change VDD2 OPP, dpll3_m2x2 rate does not change. Fixed by
re-routing dpll3_m2x2 parent to dpll3_m2.

Signed-off-by: Tero Kristo <tero.kristo@nokia.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/clock34xx.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index c8119781e00..9565c05bebd 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -489,9 +489,9 @@ static struct clk core_ck = {
 static struct clk dpll3_m2x2_ck = {
 	.name		= "dpll3_m2x2_ck",
 	.ops		= &clkops_null,
-	.parent		= &dpll3_x2_ck,
+	.parent		= &dpll3_m2_ck,
 	.clkdm_name	= "dpll3_clkdm",
-	.recalc		= &followparent_recalc,
+	.recalc		= &omap3_clkoutx2_recalc,
 };
 
 /* The PWRDN bit is apparently only available on 3430ES2 and above */
-- 
cgit v1.2.3


From d32b20fc7dad87ac95fcc73fca3606c0db85f210 Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Tue, 17 Nov 2009 14:39:03 -0800
Subject: omap: fix unlikely(x) < y

The closing parenthesis was not in the right location.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
 arch/arm/plat-omap/gpio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 71ebd7fcfea..7c345b757df 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -373,7 +373,7 @@ static inline int gpio_valid(int gpio)
 
 static int check_gpio(int gpio)
 {
-	if (unlikely(gpio_valid(gpio)) < 0) {
+	if (unlikely(gpio_valid(gpio) < 0)) {
 		printk(KERN_ERR "omap-gpio: invalid GPIO %d\n", gpio);
 		dump_stack();
 		return -1;
-- 
cgit v1.2.3


From e7fdc6052e78738ce90e0bdc051f2ddf60e41324 Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Tue, 17 Nov 2009 14:39:06 -0800
Subject: OMAP: cs should be positive in gpmc_cs_free()

The index `cs' is signed, test whether it is negative before we release
gpmc_cs_mem[cs].

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
 arch/arm/mach-omap2/gpmc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index f8657568b1b..f3c992e2965 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -378,7 +378,7 @@ EXPORT_SYMBOL(gpmc_cs_request);
 void gpmc_cs_free(int cs)
 {
 	spin_lock(&gpmc_mem_lock);
-	if (cs >= GPMC_CS_NUM || !gpmc_cs_reserved(cs)) {
+	if (cs >= GPMC_CS_NUM || cs < 0 || !gpmc_cs_reserved(cs)) {
 		printk(KERN_ERR "Trying to free non-reserved GPMC CS%d\n", cs);
 		BUG();
 		spin_unlock(&gpmc_mem_lock);
-- 
cgit v1.2.3


From 4ff1fa278b0bd1b2dd3c42efc0cb86788ffe05d5 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Wed, 18 Nov 2009 18:03:19 +0000
Subject: [ARM] kmap: fix build errors with DEBUG_HIGHMEM enabled

d451564 broke ARM by requiring KM_IRQ_PTE, KM_NMI and KM_NMI_PTE to
always be defined.  Solve this by providing invalid definitions for
these constants, but only if CONFIG_DEBUG_HIGHMEM is enabled.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/kmap_types.h | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/kmap_types.h b/arch/arm/include/asm/kmap_types.h
index d16ec97ec9a..c019949a518 100644
--- a/arch/arm/include/asm/kmap_types.h
+++ b/arch/arm/include/asm/kmap_types.h
@@ -22,4 +22,10 @@ enum km_type {
 	KM_TYPE_NR
 };
 
+#ifdef CONFIG_DEBUG_HIGHMEM
+#define KM_NMI		(-1)
+#define KM_NMI_PTE	(-1)
+#define KM_IRQ_PTE	(-1)
+#endif
+
 #endif
-- 
cgit v1.2.3


From 68a31de302bae12010ab116752d4362bd7fe2851 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Fri, 20 Nov 2009 17:50:34 +0100
Subject: [ARM] pxa/cpufreq: fix index assignments for end marker

I stumbled over two small things regarding the .index field assignment
in the dynamically created cpu frequency tables for pxa2xx and pxa3xx.

Even though that doesn't currently cause any problem, it should still be
fixed in case the logic in the CPUFREQ core changes.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/cpufreq-pxa2xx.c | 1 +
 arch/arm/mach-pxa/cpufreq-pxa3xx.c | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index 983cc8c2008..9e4d9816726 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -447,6 +447,7 @@ static __init int pxa_cpufreq_init(struct cpufreq_policy *policy)
 		pxa27x_freq_table[i].frequency = freq;
 		pxa27x_freq_table[i].index = i;
 	}
+	pxa27x_freq_table[i].index = i;
 	pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END;
 
 	/*
diff --git a/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
index 67f34a8d8e6..149cdd9aee4 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa3xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
@@ -102,7 +102,7 @@ static int setup_freqs_table(struct cpufreq_policy *policy,
 		table[i].index = i;
 		table[i].frequency = freqs[i].cpufreq_mhz * 1000;
 	}
-	table[num].frequency = i;
+	table[num].index = i;
 	table[num].frequency = CPUFREQ_TABLE_END;
 
 	pxa3xx_freqs = freqs;
-- 
cgit v1.2.3


From 81065518eda14ebbce1b48c98d5077b0a059d4a3 Mon Sep 17 00:00:00 2001
From: Pavel Machek <pavel@ucw.cz>
Date: Wed, 18 Nov 2009 10:01:00 +0100
Subject: [ARM] pxa/spitz: fix compile regression on spitz

If CONFIG_AKITA is not set, spitz fails to compile. It worked ok in
rc5. Fix is one more ifdef...

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Stanislav Brabec <utx@penguin.cz>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/spitz.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 3da45d05174..d98023f5550 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -802,10 +802,12 @@ static void __init spitz_init(void)
 {
 	spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON;
 
+#ifdef CONFIG_MACH_BORZOI
 	if (machine_is_borzoi()) {
 		sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt;
 		sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo;
 	}
+#endif
 
 	platform_scoop_config = &spitz_pcmcia_config;
 
-- 
cgit v1.2.3


From 3336f4f08e0dad7a2b6493c80b49b685141d53ad Mon Sep 17 00:00:00 2001
From: Jean PIHET <jpihet@mvista.com>
Date: Mon, 23 Nov 2009 17:03:32 +0100
Subject: ARM: 5793/1: ARM: Check put_user fail in do_signal when enable
 OABI_COMPAT

Using OABI, the call to put_user in do_signal can fail causing the
calling app to hang.

The solution is to check if put_user fails and force the app to
seg fault in that case.

Tested with multiple sleeping apps/threads (using the nanosleep syscall)
and suspend/resume.

Signed-off-by: janboe <janboe.ye at gmail.com>
Signed-off-by: Jean Pihet <jpihet@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/signal.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 2a573d4fea2..e7714f367eb 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -662,8 +662,12 @@ static void do_signal(struct pt_regs *regs, int syscall)
 				regs->ARM_sp -= 4;
 				usp = (u32 __user *)regs->ARM_sp;
 
-				put_user(regs->ARM_pc, usp);
-				regs->ARM_pc = KERN_RESTART_CODE;
+				if (put_user(regs->ARM_pc, usp) == 0) {
+					regs->ARM_pc = KERN_RESTART_CODE;
+				} else {
+					regs->ARM_sp += 4;
+					force_sigsegv(0, current);
+				}
 #endif
 			}
 		}
-- 
cgit v1.2.3


From 9faf3c1d0dab9e9f4b0cbd42bc37be515d8b8cb1 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Wed, 25 Nov 2009 22:14:59 +0000
Subject: [ARM] Update mach-types

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/tools/mach-types | 119 +++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 117 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 94be7bb6cb9..07b976da617 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Fri Sep 18 21:42:00 2009
+# Last update: Wed Nov 25 22:14:58 2009
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -928,7 +928,7 @@ palmt5			MACH_PALMT5		PALMT5			917
 palmtc			MACH_PALMTC		PALMTC			918
 omap_apollon		MACH_OMAP_APOLLON	OMAP_APOLLON		919
 mxc30030evb		MACH_MXC30030EVB	MXC30030EVB		920
-rea_2d			MACH_REA_2D		REA_2D			921
+rea_cpu2		MACH_REA_2D		REA_2D			921
 eti3e524		MACH_TI3E524		TI3E524			922
 ateb9200		MACH_ATEB9200		ATEB9200		923
 auckland		MACH_AUCKLAND		AUCKLAND		924
@@ -2421,3 +2421,118 @@ liberty			MACH_LIBERTY		LIBERTY			2434
 mh355			MACH_MH355		MH355			2435
 pc7802			MACH_PC7802		PC7802			2436
 gnet_sgc		MACH_GNET_SGC		GNET_SGC		2437
+einstein15		MACH_EINSTEIN15		EINSTEIN15		2438
+cmpd			MACH_CMPD		CMPD			2439
+davinci_hase1		MACH_DAVINCI_HASE1	DAVINCI_HASE1		2440
+lgeincitephone		MACH_LGEINCITEPHONE	LGEINCITEPHONE		2441
+ea313x			MACH_EA313X		EA313X			2442
+fwbd_39064		MACH_FWBD_39064		FWBD_39064		2443
+fwbd_390128		MACH_FWBD_390128	FWBD_390128		2444
+pelco_moe		MACH_PELCO_MOE		PELCO_MOE		2445
+minimix27		MACH_MINIMIX27		MINIMIX27		2446
+omap3_thunder		MACH_OMAP3_THUNDER	OMAP3_THUNDER		2447
+passionc		MACH_PASSIONC		PASSIONC		2448
+mx27amata		MACH_MX27AMATA		MX27AMATA		2449
+bgat1			MACH_BGAT1		BGAT1			2450
+buzz			MACH_BUZZ		BUZZ			2451
+mb9g20			MACH_MB9G20		MB9G20			2452
+yushan			MACH_YUSHAN		YUSHAN			2453
+lizard			MACH_LIZARD		LIZARD			2454
+omap3polycom		MACH_OMAP3POLYCOM	OMAP3POLYCOM		2455
+smdkv210		MACH_SMDKV210		SMDKV210		2456
+bravo			MACH_BRAVO		BRAVO			2457
+siogentoo1		MACH_SIOGENTOO1		SIOGENTOO1		2458
+siogentoo2		MACH_SIOGENTOO2		SIOGENTOO2		2459
+sm3k			MACH_SM3K		SM3K			2460
+acer_tempo_f900		MACH_ACER_TEMPO_F900	ACER_TEMPO_F900		2461
+sst61vc010_dev		MACH_SST61VC010_DEV	SST61VC010_DEV		2462
+glittertind		MACH_GLITTERTIND	GLITTERTIND		2463
+omap_zoom3		MACH_OMAP_ZOOM3		OMAP_ZOOM3		2464
+omap_3630sdp		MACH_OMAP_3630SDP	OMAP_3630SDP		2465
+cybook2440		MACH_CYBOOK2440		CYBOOK2440		2466
+torino_s		MACH_TORINO_S		TORINO_S		2467
+havana			MACH_HAVANA		HAVANA			2468
+beaumont_11		MACH_BEAUMONT_11	BEAUMONT_11		2469
+vanguard		MACH_VANGUARD		VANGUARD		2470
+s5pc110_draco		MACH_S5PC110_DRACO	S5PC110_DRACO		2471
+cartesio_two		MACH_CARTESIO_TWO	CARTESIO_TWO		2472
+aster			MACH_ASTER		ASTER			2473
+voguesv210		MACH_VOGUESV210		VOGUESV210		2474
+acm500x			MACH_ACM500X		ACM500X			2475
+km9260			MACH_KM9260		KM9260			2476
+nideflexg1		MACH_NIDEFLEXG1		NIDEFLEXG1		2477
+ctera_plug_io		MACH_CTERA_PLUG_IO	CTERA_PLUG_IO		2478
+smartq7			MACH_SMARTQ7		SMARTQ7			2479
+at91sam9g10ek2		MACH_AT91SAM9G10EK2	AT91SAM9G10EK2		2480
+asusp527		MACH_ASUSP527		ASUSP527		2481
+at91sam9g20mpm2		MACH_AT91SAM9G20MPM2	AT91SAM9G20MPM2		2482
+topasa900		MACH_TOPASA900		TOPASA900		2483
+electrum_100		MACH_ELECTRUM_100	ELECTRUM_100		2484
+mx51grb			MACH_MX51GRB		MX51GRB			2485
+xea300			MACH_XEA300		XEA300			2486
+htcstartrek		MACH_HTCSTARTREK	HTCSTARTREK		2487
+lima			MACH_LIMA		LIMA			2488
+csb740			MACH_CSB740		CSB740			2489
+usb_s8815		MACH_USB_S8815		USB_S8815		2490
+watson_efm_plugin	MACH_WATSON_EFM_PLUGIN	WATSON_EFM_PLUGIN	2491
+milkyway		MACH_MILKYWAY		MILKYWAY		2492
+g4evm			MACH_G4EVM		G4EVM			2493
+picomod6		MACH_PICOMOD6		PICOMOD6		2494
+omapl138_hawkboard	MACH_OMAPL138_HAWKBOARD	OMAPL138_HAWKBOARD	2495
+ip6000			MACH_IP6000		IP6000			2496
+ip6010			MACH_IP6010		IP6010			2497
+utm400			MACH_UTM400		UTM400			2498
+omap3_zybex		MACH_OMAP3_ZYBEX	OMAP3_ZYBEX		2499
+wireless_space		MACH_WIRELESS_SPACE	WIRELESS_SPACE		2500
+sx560			MACH_SX560		SX560			2501
+ts41x			MACH_TS41X		TS41X			2502
+elphel10373		MACH_ELPHEL10373	ELPHEL10373		2503
+rhobot			MACH_RHOBOT		RHOBOT			2504
+mx51_refresh		MACH_MX51_REFRESH	MX51_REFRESH		2505
+ls9260			MACH_LS9260		LS9260			2506
+shank			MACH_SHANK		SHANK			2507
+qsd8x50_st1		MACH_QSD8X50_ST1	QSD8X50_ST1		2508
+at91sam9m10ekes		MACH_AT91SAM9M10EKES	AT91SAM9M10EKES		2509
+hiram			MACH_HIRAM		HIRAM			2510
+phy3250			MACH_PHY3250		PHY3250			2511
+ea3250			MACH_EA3250		EA3250			2512
+fdi3250			MACH_FDI3250		FDI3250			2513
+whitestone		MACH_WHITESTONE		WHITESTONE		2514
+at91sam9263nit		MACH_AT91SAM9263NIT	AT91SAM9263NIT		2515
+ccmx51			MACH_CCMX51		CCMX51			2516
+ccmx51js		MACH_CCMX51JS		CCMX51JS		2517
+ccwmx51			MACH_CCWMX51		CCWMX51			2518
+ccwmx51js		MACH_CCWMX51JS		CCWMX51JS		2519
+mini6410		MACH_MINI6410		MINI6410		2520
+tiny6410		MACH_TINY6410		TINY6410		2521
+nano6410		MACH_NANO6410		NANO6410		2522
+at572d940hfnldb		MACH_AT572D940HFNLDB	AT572D940HFNLDB		2523
+htcleo			MACH_HTCLEO		HTCLEO			2524
+avp13			MACH_AVP13		AVP13			2525
+xxsvideod		MACH_XXSVIDEOD		XXSVIDEOD		2526
+vpnext			MACH_VPNEXT		VPNEXT			2527
+swarco_itc3		MACH_SWARCO_ITC3	SWARCO_ITC3		2528
+tx51			MACH_TX51		TX51			2529
+dolby_cat1021		MACH_DOLBY_CAT1021	DOLBY_CAT1021		2530
+mx28evk			MACH_MX28EVK		MX28EVK			2531
+phoenix260		MACH_PHOENIX260		PHOENIX260		2532
+uvaca_stork		MACH_UVACA_STORK	UVACA_STORK		2533
+smartq5			MACH_SMARTQ5		SMARTQ5			2534
+all3078			MACH_ALL3078		ALL3078			2535
+ctera_2bay_ds		MACH_CTERA_2BAY_DS	CTERA_2BAY_DS		2536
+siogentoo3		MACH_SIOGENTOO3		SIOGENTOO3		2537
+epb5000			MACH_EPB5000		EPB5000			2538
+hy9263			MACH_HY9263		HY9263			2539
+acer_tempo_m900		MACH_ACER_TEMPO_M900	ACER_TEMPO_M900		2540
+acer_tempo_dx650	MACH_ACER_TEMPO_DX900	ACER_TEMPO_DX900	2541
+acer_tempo_x960		MACH_ACER_TEMPO_X960	ACER_TEMPO_X960		2542
+acer_eten_v900		MACH_ACER_ETEN_V900	ACER_ETEN_V900		2543
+acer_eten_x900		MACH_ACER_ETEN_X900	ACER_ETEN_X900		2544
+bonnell			MACH_BONNELL		BONNELL			2545
+oht_mx27		MACH_OHT_MX27		OHT_MX27		2546
+htcquartz		MACH_HTCQUARTZ		HTCQUARTZ		2547
+davinci_dm6467tevm	MACH_DAVINCI_DM6467TEVM	DAVINCI_DM6467TEVM	2548
+c3ax03			MACH_C3AX03		C3AX03			2549
+mxt_td60		MACH_MXT_TD60		MXT_TD60		2550
+esyx			MACH_ESYX		ESYX			2551
+bulldog			MACH_BULLDOG		BULLDOG			2553
-- 
cgit v1.2.3


From 23dcc9ef00892b278560cacf045b8d8b260a2582 Mon Sep 17 00:00:00 2001
From: Lars-Peter Clausen <lars@metafoo.de>
Date: Mon, 5 Oct 2009 13:39:17 +0200
Subject: Add c fiq handler.

---
 arch/arm/include/asm/fiq.h               |  5 +-
 arch/arm/kernel/fiq.c                    | 79 ++++++++++++++++++++++++++++++++
 arch/arm/plat-s3c24xx/include/plat/irq.h | 21 +++++++++
 arch/arm/plat-s3c24xx/irq.c              | 48 +++++++++++++++----
 4 files changed, 142 insertions(+), 11 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/fiq.h b/arch/arm/include/asm/fiq.h
index 2242ce22ec6..7ade2b8445d 100644
--- a/arch/arm/include/asm/fiq.h
+++ b/arch/arm/include/asm/fiq.h
@@ -29,8 +29,9 @@ struct fiq_handler {
 extern int claim_fiq(struct fiq_handler *f);
 extern void release_fiq(struct fiq_handler *f);
 extern void set_fiq_handler(void *start, unsigned int length);
-extern void set_fiq_regs(struct pt_regs *regs);
-extern void get_fiq_regs(struct pt_regs *regs);
+extern void set_fiq_c_handler(void (*handler)(void));
+extern void __attribute__((naked)) set_fiq_regs(struct pt_regs *regs);
+extern void __attribute__((naked)) get_fiq_regs(struct pt_regs *regs);
 extern void enable_fiq(int fiq);
 extern void disable_fiq(int fiq);
 
diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c
index 6ff7919613d..c07691ef4c0 100644
--- a/arch/arm/kernel/fiq.c
+++ b/arch/arm/kernel/fiq.c
@@ -8,6 +8,8 @@
  *
  *  FIQ support re-written by Russell King to be more generic
  *
+ *  FIQ handler in C supoprt written by Andy Green <andy@openmoko.com>
+ *
  * We now properly support a method by which the FIQ handlers can
  * be stacked onto the vector.  We still do not support sharing
  * the FIQ vector itself.
@@ -124,6 +126,83 @@ void __naked get_fiq_regs(struct pt_regs *regs)
 	: "r" (&regs->ARM_r8), "I" (PSR_I_BIT | PSR_F_BIT | FIQ_MODE));
 }
 
+/* -------- FIQ handler in C ---------
+ *
+ * Major Caveats for using this
+ *  ---------------------------
+ *  *
+ *  * 1) it CANNOT touch any vmalloc()'d memory, only memory
+ *    that was kmalloc()'d.  Static allocations in the monolithic kernel
+ *    are kmalloc()'d so they are okay.  You can touch memory-mapped IO, but
+ *    the pointer for it has to have been stored in kmalloc'd memory.  The
+ *    reason for this is simple: every now and then Linux turns off interrupts
+ *    and reorders the paging tables.  If a FIQ happens during this time, the
+ *    virtual memory space can be partly or entirely disordered or missing.
+ *
+ * 2) Because vmalloc() is used when a module is inserted, THIS FIQ
+ *    ISR HAS TO BE IN THE MONOLITHIC KERNEL, not a module.  But the way
+ *    it is set up, you can all to enable and disable it from your module
+ *    and intercommunicate with it through struct fiq_ipc
+ *    fiq_ipc which you can define in
+ *    asm/archfiq_ipc_type.h.  The reason is the same as above, a
+ *    FIQ could happen while even the ISR is not present in virtual memory
+ *    space due to pagetables being changed at the time.
+ *
+ * 3) You can't call any Linux API code except simple macros
+ *    - understand that FIQ can come in at any time, no matter what
+ *      state of undress the kernel may privately be in, thinking it
+ *      locked the door by turning off interrupts... FIQ is an
+ *      unstoppable monster force (which is its value)
+ *    - they are not vmalloc()'d memory safe
+ *    - they might do crazy stuff like sleep: FIQ pisses fire and
+ *      is not interested in 'sleep' that the weak seem to need
+ *    - calling APIs from FIQ can re-enter un-renterable things
+ *    - summary: you cannot interoperate with linux APIs directly in the FIQ ISR
+ *
+ * If you follow these rules, it is fantastic, an extremely powerful, solid,
+ * genuine hard realtime feature.
+ */
+
+static void (*current_fiq_c_isr)(void);
+#define FIQ_C_ISR_STACK_SIZE 	256
+
+static void __attribute__((naked)) __jump_to_isr(void)
+{
+	asm __volatile__ ("mov pc, r8");
+}
+
+
+static void __attribute__((naked)) __actual_isr(void)
+{
+	asm __volatile__ (
+		"stmdb	sp!, {r0-r12, lr};"
+		"mov     fp, sp;"
+	);
+
+	current_fiq_c_isr();
+
+	asm __volatile__ (
+		"ldmia	sp!, {r0-r12, lr};"
+		"subs	pc, lr, #4;"
+	);
+}
+
+void set_fiq_c_handler(void (*isr)(void))
+{
+	struct pt_regs regs;
+
+	memset(&regs, 0, sizeof(regs));
+	regs.ARM_r8 = (unsigned long) __actual_isr;
+	regs.ARM_sp = 0xffff001c + FIQ_C_ISR_STACK_SIZE;
+
+	set_fiq_handler(__jump_to_isr, 4);
+
+	current_fiq_c_isr = isr;
+
+	set_fiq_regs(&regs);
+}
+/* -------- FIQ handler in C ---------*/
+
 int claim_fiq(struct fiq_handler *f)
 {
 	int ret = 0;
diff --git a/arch/arm/plat-s3c24xx/include/plat/irq.h b/arch/arm/plat-s3c24xx/include/plat/irq.h
index 69e1be8bec3..11a866466d8 100644
--- a/arch/arm/plat-s3c24xx/include/plat/irq.h
+++ b/arch/arm/plat-s3c24xx/include/plat/irq.h
@@ -12,6 +12,7 @@
 
 #include <linux/io.h>
 
+#include <mach/irqs.h>
 #include <mach/hardware.h>
 #include <mach/regs-irq.h>
 #include <mach/regs-gpio.h>
@@ -31,8 +32,15 @@ s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit,
 {
 	unsigned long mask;
 	unsigned long submask;
+#ifdef CONFIG_S3C2440_C_FIQ
+	unsigned long flags;
+#endif
 
 	submask = __raw_readl(S3C2410_INTSUBMSK);
+#ifdef CONFIG_S3C2440_C_FIQ
+	local_save_flags(flags);
+	local_fiq_disable();
+#endif
 	mask = __raw_readl(S3C2410_INTMSK);
 
 	submask |= (1UL << (irqno - IRQ_S3CUART_RX0));
@@ -45,6 +53,9 @@ s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit,
 
 	/* write back masks */
 	__raw_writel(submask, S3C2410_INTSUBMSK);
+#ifdef CONFIG_S3C2440_C_FIQ
+	local_irq_restore(flags);
+#endif
 
 }
 
@@ -53,8 +64,15 @@ s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit)
 {
 	unsigned long mask;
 	unsigned long submask;
+#ifdef CONFIG_S3C2440_C_FIQ
+	unsigned long flags;
+#endif
 
 	submask = __raw_readl(S3C2410_INTSUBMSK);
+#ifdef CONFIG_S3C2440_C_FIQ
+	local_save_flags(flags);
+	local_fiq_disable();
+#endif
 	mask = __raw_readl(S3C2410_INTMSK);
 
 	submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0));
@@ -63,6 +81,9 @@ s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit)
 	/* write back masks */
 	__raw_writel(submask, S3C2410_INTSUBMSK);
 	__raw_writel(mask, S3C2410_INTMSK);
+#ifdef CONFIG_S3C2440_C_FIQ
+	local_irq_restore(flags);
+#endif
 }
 
 
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index d02f5f02045..14aa528d985 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -28,6 +28,8 @@
 #include <asm/mach/irq.h>
 
 #include <plat/regs-irqtype.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
 
 #include <plat/cpu.h>
 #include <plat/pm.h>
@@ -37,12 +39,20 @@ static void
 s3c_irq_mask(unsigned int irqno)
 {
 	unsigned long mask;
-
+#ifdef CONFIG_S3C2440_C_FIQ
+	unsigned long flags;
+#endif
 	irqno -= IRQ_EINT0;
-
+#ifdef CONFIG_S3C2440_C_FIQ
+	local_save_flags(flags);
+	local_fiq_disable();
+#endif
 	mask = __raw_readl(S3C2410_INTMSK);
 	mask |= 1UL << irqno;
 	__raw_writel(mask, S3C2410_INTMSK);
+#ifdef CONFIG_S3C2440_C_FIQ
+	local_irq_restore(flags);
+#endif
 }
 
 static inline void
@@ -59,9 +69,19 @@ s3c_irq_maskack(unsigned int irqno)
 {
 	unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
 	unsigned long mask;
+#ifdef CONFIG_S3C2440_C_FIQ
+	unsigned long flags;
+#endif
 
+#ifdef CONFIG_S3C2440_C_FIQ
+	local_save_flags(flags);
+	local_fiq_disable();
+#endif
 	mask = __raw_readl(S3C2410_INTMSK);
 	__raw_writel(mask|bitval, S3C2410_INTMSK);
+#ifdef CONFIG_S3C2440_C_FIQ
+	local_irq_restore(flags);
+#endif
 
 	__raw_writel(bitval, S3C2410_SRCPND);
 	__raw_writel(bitval, S3C2410_INTPND);
@@ -72,15 +92,25 @@ static void
 s3c_irq_unmask(unsigned int irqno)
 {
 	unsigned long mask;
+#ifdef CONFIG_S3C2440_C_FIQ
+	unsigned long flags;
+#endif
 
 	if (irqno != IRQ_TIMER4 && irqno != IRQ_EINT8t23)
 		irqdbf2("s3c_irq_unmask %d\n", irqno);
 
 	irqno -= IRQ_EINT0;
 
+#ifdef CONFIG_S3C2440_C_FIQ
+	local_save_flags(flags);
+	local_fiq_disable();
+#endif
 	mask = __raw_readl(S3C2410_INTMSK);
 	mask &= ~(1UL << irqno);
 	__raw_writel(mask, S3C2410_INTMSK);
+#ifdef CONFIG_S3C2440_C_FIQ
+	local_irq_restore(flags);
+#endif
 }
 
 struct irq_chip s3c_irq_level_chip = {
@@ -559,26 +589,26 @@ void __init s3c24xx_init_irq(void)
 
 	last = 0;
 	for (i = 0; i < 4; i++) {
-		pend = __raw_readl(S3C2410_INTPND);
+		pend = __raw_readl(S3C2410_SUBSRCPND);
 
 		if (pend == 0 || pend == last)
 			break;
 
-		__raw_writel(pend, S3C2410_SRCPND);
-		__raw_writel(pend, S3C2410_INTPND);
-		printk("irq: clearing pending status %08x\n", (int)pend);
+		printk("irq: clearing subpending status %08x\n", (int)pend);
+		__raw_writel(pend, S3C2410_SUBSRCPND);
 		last = pend;
 	}
 
 	last = 0;
 	for (i = 0; i < 4; i++) {
-		pend = __raw_readl(S3C2410_SUBSRCPND);
+		pend = __raw_readl(S3C2410_INTPND);
 
 		if (pend == 0 || pend == last)
 			break;
 
-		printk("irq: clearing subpending status %08x\n", (int)pend);
-		__raw_writel(pend, S3C2410_SUBSRCPND);
+		__raw_writel(pend, S3C2410_SRCPND);
+		__raw_writel(pend, S3C2410_INTPND);
+		printk("irq: clearing pending status %08x\n", (int)pend);
 		last = pend;
 	}
 
-- 
cgit v1.2.3


From a15de5977c3233d671fc9e5d4150ad1e3d4b6df9 Mon Sep 17 00:00:00 2001
From: Lars-Peter Clausen <lars@metafoo.de>
Date: Sun, 11 Oct 2009 00:33:51 +0200
Subject: s3c24xx: Add support for board IRQs

Some boards have a need for a set of extra IRQ numbers, for example some
multifunction devices which do irq demultiplexing require them.
This patch adds S3C2410_BOARD_NR_IRQS which specifies the number of extra board
IRQs. Board specific code would use S3C2410_BOARD_IRQ_START to get the number of
it's first irq.

Since it is possible to support a multiple boards with a single kernel and
there is no easy way to set a CONFIG option to multiple values and only use the
maximum each board which needs board IRQs has do be explicitly added to irqs.h

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
 arch/arm/mach-s3c2410/include/mach/irqs.h | 22 ++++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h
index 6c12c6312ad..ceb1733a709 100644
--- a/arch/arm/mach-s3c2410/include/mach/irqs.h
+++ b/arch/arm/mach-s3c2410/include/mach/irqs.h
@@ -153,9 +153,9 @@
 #define IRQ_S3C2443_AC97	S3C2410_IRQSUB(28)
 
 #ifdef CONFIG_CPU_S3C2443
-#define NR_IRQS (IRQ_S3C2443_AC97+1)
+#define S3C2410_NR_INTERNAL_IRQS (IRQ_S3C2443_AC97+1)
 #else
-#define NR_IRQS (IRQ_S3C2440_AC97+1)
+#define S3C2410_NR_INTERNAL_IRQS (IRQ_S3C2440_AC97+1)
 #endif
 
 /* compatibility define. */
@@ -173,4 +173,22 @@
 /* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
 #define FIQ_START		IRQ_EINT0
 
+/* Board specific IRQs
+ * If your board needs a extra set of IRQ numbers add it to the list here.
+ * Make sure that the numbers are kept in descending, so if multiple boards are
+ * selected the maximum will be used and there are enough IRQ numbers available
+ * for each board.
+ */
+
+#if 0
+/* Number of board specific irqs go here */
+#else
+#define S3C2410_NR_BOARD_IRQS 0
+#endif
+
+#define S3C2410_BOARD_IRQ_START S3C2410_NR_INTERNAL_IRQS
+#define S3C2410_BOARD_IRQ_END	(S3C2410_BOARD_IRQ_START + S3C2410_NR_BOARD_IRQS)
+
+#define NR_IRQS			S3C2410_BOARD_IRQ_END
+
 #endif /* __ASM_ARCH_IRQ_H */
-- 
cgit v1.2.3


From 45e4b53d5734c3ca10e95c072736469188370148 Mon Sep 17 00:00:00 2001
From: Lars-Peter Clausen <lars@metafoo.de>
Date: Sun, 11 Oct 2009 01:23:35 +0200
Subject: s3c24xx: Add number of board irqs for the gta02

The gta02 uses the glamo mfd driver which requires 9 board irqs.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
 arch/arm/mach-s3c2410/include/mach/irqs.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h
index ceb1733a709..6986d02fd4d 100644
--- a/arch/arm/mach-s3c2410/include/mach/irqs.h
+++ b/arch/arm/mach-s3c2410/include/mach/irqs.h
@@ -180,8 +180,8 @@
  * for each board.
  */
 
-#if 0
-/* Number of board specific irqs go here */
+#if defined(CONFIG_MACH_NEO1973_GTA02)
+#define S3C2410_NR_BOARD_IRQS 9
 #else
 #define S3C2410_NR_BOARD_IRQS 0
 #endif
-- 
cgit v1.2.3


From 57a23ec79475bb06294532c6d02fa33d7d87323c Mon Sep 17 00:00:00 2001
From: Holger Freyther <zecke@openmoko.org>
Date: Wed, 19 Nov 2008 17:10:51 +0000
Subject: mtd: s3c2410_nand: Add config option to disable hw ecc at runtime

This patch adds a flag to the s3c2410_nand platform data, which configures
whether hardware ecc is used for that chip.

Currently hardware ecc is used if it was compiled into the kernel. But if you
want to build a kernel which runs on multiple devices you might have a
configuration where you have devices which require hw ecc as well as devices
which want software ecc.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
 arch/arm/plat-s3c/include/plat/nand.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c/include/plat/nand.h b/arch/arm/plat-s3c/include/plat/nand.h
index 18f958801e6..723ab032059 100644
--- a/arch/arm/plat-s3c/include/plat/nand.h
+++ b/arch/arm/plat-s3c/include/plat/nand.h
@@ -47,6 +47,7 @@ struct s3c2410_platform_nand {
 	int	twrph1;	/* time for release CLE/ALE from nWE/nOE inactive */
 
 	unsigned int	ignore_unset_ecc:1;
+	unsigned int	software_ecc:1; /* force software ecc at runtime */
 
 	int			nr_sets;
 	struct s3c2410_nand_set *sets;
-- 
cgit v1.2.3


From 918c165eec82a9a28175e539e86390eb6430d709 Mon Sep 17 00:00:00 2001
From: Lars-Peter Clausen <lars@metafoo.de>
Date: Tue, 3 Nov 2009 00:29:53 +0100
Subject: s3c: Register gpio bank J with gpiolib

This is nonportable and wastes a lot of memory and thus should be replaced with
a prober solution asap.
---
 arch/arm/mach-s3c2410/include/mach/gpio.h |  5 +++--
 arch/arm/plat-s3c24xx/gpiolib.c           | 13 +++++++++++--
 2 files changed, 14 insertions(+), 4 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h
index 15f0b3e7ce6..0b53cad80fe 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio.h
@@ -20,10 +20,11 @@
  * devices that need GPIO.
  */
 
-#define ARCH_NR_GPIOS	(256 + CONFIG_S3C24XX_GPIO_EXTRA)
+#define ARCH_NR_GPIOS	(512 + CONFIG_S3C24XX_GPIO_EXTRA)
 
 #include <asm-generic/gpio.h>
 #include <mach/gpio-nrs.h>
 #include <mach/gpio-fns.h>
+#include <mach/regs-gpioj.h>
 
-#define S3C_GPIO_END	(S3C2410_GPIO_BANKH + 32)
+#define S3C_GPIO_END	(S3C2440_GPIO_BANKJ + 32)
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index 6d7a961d326..c2dd900660b 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -26,6 +26,7 @@
 #include <plat/pm.h>
 
 #include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
 
 static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset)
 {
@@ -160,8 +161,16 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
 			.label			= "GPIOH",
 			.ngpio			= 11,
 		},
-	},
-};
+	}, {
+		.base	= S3C2440_GPJCON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
+		.chip	= {
+			.base			= S3C2440_GPJ0,
+			.owner			= THIS_MODULE,
+			.label			= "GPIOJ",
+			.ngpio			= 11,
+		},
+	},};
 
 static __init int s3c24xx_gpiolib_init(void)
 {
-- 
cgit v1.2.3


From aa5f3d60c3934508819b0acf9aaef061ff3db4a6 Mon Sep 17 00:00:00 2001
From: Lars-Peter Clausen <lars@metafoo.de>
Date: Thu, 5 Nov 2009 23:04:42 +0100
Subject: S3C: Allow to completly disable low-level messages

In some cases it is desirable to completly disable low-level messages. For
example if you have no uart available for a serial console.
With this patch it is possible to disable low-level messages by setting
CONFIG_S3C_LOWLEVEL_UART_PORT to less then zero.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
 arch/arm/boot/compressed/head.S             |  2 +-
 arch/arm/plat-s3c/include/plat/uncompress.h | 19 +++++++++++++++----
 2 files changed, 16 insertions(+), 5 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index fa6fbf45cf3..4f0708b83ed 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -58,7 +58,7 @@
 		add	\rb, \rb, #0x00010000	@ Ser1
 #endif
 		.endm
-#elif defined(CONFIG_ARCH_S3C2410)
+#elif defined(CONFIG_ARCH_S3C2410) && CONFIG_S3C_LOWLEVEL_UART_PORT >= 0
 		.macro loadsp, rb
 		mov	\rb, #0x50000000
 		add	\rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT
diff --git a/arch/arm/plat-s3c/include/plat/uncompress.h b/arch/arm/plat-s3c/include/plat/uncompress.h
index dc66a477f62..8e02073e307 100644
--- a/arch/arm/plat-s3c/include/plat/uncompress.h
+++ b/arch/arm/plat-s3c/include/plat/uncompress.h
@@ -37,6 +37,8 @@ static void arch_detect_cpu(void);
 /* how many bytes we allow into the FIFO at a time in FIFO mode */
 #define FIFO_MAX	 (14)
 
+#if  CONFIG_S3C_LOWLEVEL_UART_PORT >= 0
+
 #define uart_base S3C_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT)
 
 static __inline__ void
@@ -86,10 +88,6 @@ static void putc(int ch)
 	uart_wr(S3C2410_UTXH, ch);
 }
 
-static inline void flush(void)
-{
-}
-
 #define __raw_writel(d, ad)			\
 	do {							\
 		*((volatile unsigned int __force *)(ad)) = (d); \
@@ -163,6 +161,19 @@ static inline void arch_enable_uart_fifo(void)
 #define arch_enable_uart_fifo() do { } while(0)
 #endif
 
+#else
+static inline void putc(int ch)
+{
+}
+
+#define arch_enable_uart_fifo() do { } while(0)
+#define arch_decomp_wdog_start()
+#define arch_decomp_wdog()
+#endif
+
+static inline void flush(void)
+{
+}
 
 static void
 arch_decomp_setup(void)
-- 
cgit v1.2.3


From 97207e0b1d7c340abd5ab20b1654d27c09599f4c Mon Sep 17 00:00:00 2001
From: Lars-Peter Clausen <lars@metafoo.de>
Date: Sat, 28 Nov 2009 04:07:38 +0100
Subject: s3c24xx-pmw: Add suspend/resume support.

---
 arch/arm/plat-s3c/pwm.c | 72 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 72 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c/pwm.c b/arch/arm/plat-s3c/pwm.c
index 4fdc5b307fd..2a5275d98ca 100644
--- a/arch/arm/plat-s3c/pwm.c
+++ b/arch/arm/plat-s3c/pwm.c
@@ -21,6 +21,8 @@
 
 #include <mach/irqs.h>
 #include <mach/map.h>
+#include <mach/gpio.h>
+#include <mach/regs-gpio.h>
 
 #include <plat/devs.h>
 #include <plat/regs-timer.h>
@@ -40,6 +42,10 @@ struct pwm_device {
 	unsigned char		 running;
 	unsigned char		 use_count;
 	unsigned char		 pwm_id;
+
+	/* Used for saving state during suspend */
+	unsigned long		 tcon;
+	unsigned char		 routed_to_gpio:1;
 };
 
 #define pwm_dbg(_pwm, msg...) dev_dbg(&(_pwm)->pdev->dev, msg)
@@ -130,6 +136,7 @@ void pwm_free(struct pwm_device *pwm)
 
 EXPORT_SYMBOL(pwm_free);
 
+#define pwm_tcon_mask(pwm) (0xf << (pwm->tcon_base))
 #define pwm_tcon_start(pwm) (1 << (pwm->tcon_base + 0))
 #define pwm_tcon_invert(pwm) (1 << (pwm->tcon_base + 2))
 #define pwm_tcon_autoreload(pwm) (1 << (pwm->tcon_base + 3))
@@ -379,10 +386,75 @@ static int s3c_pwm_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM
+
+static int s3c_pwm_suspend(struct device *dev)
+{
+	struct pwm_device *pwm = dev_get_drvdata(dev);
+	unsigned int gpio_cfg = s3c2410_gpio_getcfg(S3C2410_GPB(pwm->pwm_id));
+
+	/* During suspend the pwm registers are reseted. If the invert bit is not
+     * set the output of TOUTn is high when the pwm is not active. In order to
+     * prevent spurious high output on the gpio at resume time, we stop routing
+     * the pwm signal to the gpio until tcon has been restored. */
+	if (gpio_cfg == S3C2410_GPIO_SFN2) {
+		s3c2410_gpio_cfgpin(S3C2410_GPB(pwm->pwm_id), S3C2410_GPIO_INPUT);
+		pwm->routed_to_gpio = 1;
+	} else {
+		pwm->routed_to_gpio = 0;
+	}
+
+	pwm->tcon = __raw_readl(S3C2410_TCON);
+
+	return 0;
+}
+
+static int s3c_pwm_resume(struct device *dev)
+{
+	struct pwm_device *pwm = dev_get_drvdata(dev);
+	unsigned long flags;
+	unsigned long tcon;
+	int duty_ns, period_ns;
+
+	duty_ns = pwm->duty_ns;
+	period_ns = pwm->period_ns;
+	pwm->duty_ns = -1;
+	pwm->period_ns = -1;
+	pwm_config(pwm, duty_ns, period_ns);
+
+	local_irq_save(flags);
+	tcon = __raw_readl(S3C2410_TCON);
+	tcon = __raw_readl(S3C2410_TCON);
+	tcon &= ~pwm_tcon_mask(pwm);
+	tcon |= pwm->tcon;
+	__raw_writel(tcon, S3C2410_TCON);
+	local_irq_restore(flags);
+
+	if (pwm->routed_to_gpio)
+		s3c2410_gpio_cfgpin(S3C2410_GPB(pwm->pwm_id), S3C2410_GPIO_SFN2);
+
+	return 0;
+}
+
+struct dev_pm_ops s3c_pwm_pm_ops = {
+	.suspend	= s3c_pwm_suspend,
+	.resume		= s3c_pwm_resume,
+	.freeze		= s3c_pwm_suspend,
+	.thaw		= s3c_pwm_resume,
+};
+
+#define S3C_PWM_PM_OPS (&s3c_pwm_pm_ops)
+
+#else
+#define S3C_PWM_PM_OPS NULL
+#endif
+
+
 static struct platform_driver s3c_pwm_driver = {
 	.driver		= {
 		.name	= "s3c24xx-pwm",
 		.owner	= THIS_MODULE,
+		.pm	= S3C_PWM_PM_OPS,
 	},
 	.probe		= s3c_pwm_probe,
 	.remove		= __devexit_p(s3c_pwm_remove),
-- 
cgit v1.2.3


From fb49c8b3238fec0f79535303e90e909ccc058059 Mon Sep 17 00:00:00 2001
From: Vasily Khoruzhick <anarsoul@gmail.com>
Date: Sat, 24 Oct 2009 03:04:55 -0500
Subject: s3c24xx: introduce s3c-adc delay

Without this patch we cannot make the s3c2410/s3c2440 touchscreen
driver work. This will be done in a different way in upstream kernel.

We specify the delay value (S3C2410_ADCDLY).

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Nelson Castillo <arhuaco@freaks-unidos.net>
---
 arch/arm/plat-s3c24xx/adc.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
index df47322492d..a1dbd0ce59e 100644
--- a/arch/arm/plat-s3c24xx/adc.c
+++ b/arch/arm/plat-s3c24xx/adc.c
@@ -62,6 +62,7 @@ struct adc_device {
 	void __iomem		*regs;
 
 	unsigned int		 prescale;
+	unsigned int		 delay;
 
 	int			 irq;
 };
@@ -307,6 +308,7 @@ static int s3c_adc_probe(struct platform_device *pdev)
 
 	adc->pdev = pdev;
 	adc->prescale = S3C2410_ADCCON_PRSCVL(49);
+	adc->delay = 0x2710;
 
 	adc->irq = platform_get_irq(pdev, 1);
 	if (adc->irq <= 0) {
@@ -346,6 +348,7 @@ static int s3c_adc_probe(struct platform_device *pdev)
 
 	writel(adc->prescale | S3C2410_ADCCON_PRSCEN,
 	       adc->regs + S3C2410_ADCCON);
+	writel(adc->delay, adc->regs + S3C2410_ADCDLY);
 
 	dev_info(dev, "attached adc driver\n");
 
@@ -401,6 +404,7 @@ static int s3c_adc_resume(struct platform_device *pdev)
 
 	writel(adc->prescale | S3C2410_ADCCON_PRSCEN,
 	       adc->regs + S3C2410_ADCCON);
+	writel(adc->delay, adc->regs + S3C2410_ADCDLY);
 
 	return 0;
 }
-- 
cgit v1.2.3


From 7f90a049d8ddcb6c485e2a6889cb3b5d4a5be1c0 Mon Sep 17 00:00:00 2001
From: Nelson Castillo <arhuaco@freaks-unidos.net>
Date: Sat, 24 Oct 2009 03:04:40 -0500
Subject: Add s3c2410ts

Add the ts and the relevant files.

Signed-off-by: Nelson Castillo <arhuaco@freaks-unidos.net>
---
 arch/arm/mach-s3c2410/include/mach/ts.h | 35 +++++++++++++++++++++++++++++++++
 arch/arm/plat-s3c/include/plat/devs.h   |  2 ++
 arch/arm/plat-s3c24xx/devs.c            | 20 +++++++++++++++++++
 3 files changed, 57 insertions(+)
 create mode 100644 arch/arm/mach-s3c2410/include/mach/ts.h

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s3c2410/include/mach/ts.h b/arch/arm/mach-s3c2410/include/mach/ts.h
new file mode 100644
index 00000000000..ffd73d5bda2
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/ts.h
@@ -0,0 +1,35 @@
+/* arch/arm/mach-s3c2410/include/mach/ts.h
+ *
+ * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *
+ *  Changelog:
+ *     24-Mar-2005     RTP     Created file
+ *     03-Aug-2005     RTP     Renamed to ts.h
+ */
+
+#ifndef __ASM_ARM_TS_H
+#define __ASM_ARM_TS_H
+
+#include <../drivers/input/touchscreen/ts_filter.h>
+
+struct s3c2410_ts_mach_info {
+	/* Touchscreen delay. */
+	int delay;
+	/* Prescaler value. */
+	int presc;
+	/*
+	 * Null-terminated array of pointers to filter APIs and configurations
+	 * we want to use. In the same order they will be applied.
+	 */
+	const struct ts_filter_chain_configuration *filter_config;
+};
+
+void set_s3c2410ts_info(const struct s3c2410_ts_mach_info *hard_s3c2410ts_info);
+
+#endif /* __ASM_ARM_TS_H */
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index 0f540ea1e99..50d50a2f086 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -53,6 +53,8 @@ extern struct platform_device s3c_device_nand;
 extern struct platform_device s3c_device_usbgadget;
 extern struct platform_device s3c_device_usb_hsotg;
 
+extern struct platform_device s3c_device_ts;
+
 /* s3c2440 specific devices */
 
 #ifdef CONFIG_CPU_S3C2440
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index f52a92ce8dd..9ef0e97d56e 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -30,6 +30,8 @@
 #include <mach/irqs.h>
 #include <asm/irq.h>
 
+#include <mach/ts.h>
+
 #include <plat/regs-serial.h>
 #include <plat/udc.h>
 
@@ -182,6 +184,24 @@ void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
 	}
 }
 
+/* Touchscreen */
+
+struct platform_device s3c_device_ts = {
+	.name		= "s3c2410-ts",
+	.id		= -1,
+	.dev.parent	= &s3c_device_adc.dev,
+};
+
+static struct s3c2410_ts_mach_info s3c2410ts_info;
+
+void set_s3c2410ts_info(const struct s3c2410_ts_mach_info *hard_s3c2410ts_info)
+{
+	memcpy(&s3c2410ts_info, hard_s3c2410ts_info,
+		sizeof(struct s3c2410_ts_mach_info));
+	s3c_device_ts.dev.platform_data = &s3c2410ts_info;
+}
+EXPORT_SYMBOL(set_s3c2410ts_info);
+
 /* USB Device (Gadget)*/
 
 static struct resource s3c_usbgadget_resource[] = {
-- 
cgit v1.2.3


From 871c0b38ef349686071b055d012bff712088aa61 Mon Sep 17 00:00:00 2001
From: Vasily Khoruzhick <anarsoul@gmail.com>
Date: Sat, 24 Oct 2009 03:05:02 -0500
Subject: Fix resume conversions

This patch fixes a bug where the TS might stop working after suspend/resume.
This patch is under upstream review and it seems it will change a lot.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Nelson Castillo <arhuaco@freaks-unidos.net>
---
 arch/arm/plat-s3c24xx/adc.c | 46 ++++++++++++++++++++++++++++++++++++++-------
 1 file changed, 39 insertions(+), 7 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
index a1dbd0ce59e..3b16670b003 100644
--- a/arch/arm/plat-s3c24xx/adc.c
+++ b/arch/arm/plat-s3c24xx/adc.c
@@ -46,6 +46,7 @@ struct s3c_adc_client {
 	int			 result;
 	unsigned char		 is_ts;
 	unsigned char		 channel;
+	unsigned int		 selected;
 
 	void	(*select_cb)(struct s3c_adc_client *c, unsigned selected);
 	void	(*convert_cb)(struct s3c_adc_client *c,
@@ -69,6 +70,8 @@ struct adc_device {
 
 static struct adc_device *adc_dev;
 
+static struct work_struct resume_work;
+
 static LIST_HEAD(adc_pending);
 
 #define adc_dbg(_adc, msg...) dev_dbg(&(_adc)->pdev->dev, msg)
@@ -86,7 +89,10 @@ static inline void s3c_adc_select(struct adc_device *adc,
 {
 	unsigned con = readl(adc->regs + S3C2410_ADCCON);
 
-	client->select_cb(client, 1);
+	if (!client->selected) {
+		client->selected = 1;
+		client->select_cb(client, 1);
+	}
 
 	con &= ~S3C2410_ADCCON_MUXMASK;
 	con &= ~S3C2410_ADCCON_STDBM;
@@ -110,12 +116,9 @@ static void s3c_adc_try(struct adc_device *adc)
 {
 	struct s3c_adc_client *next = adc->ts_pend;
 
-	if (!next && !list_empty(&adc_pending)) {
+	if (!next && !list_empty(&adc_pending))
 		next = list_first_entry(&adc_pending,
 					struct s3c_adc_client, pend);
-		list_del(&next->pend);
-	} else
-		adc->ts_pend = NULL;
 
 	if (next) {
 		adc_dbg(adc, "new client is %p\n", next);
@@ -278,14 +281,20 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw)
 
 	if (client->nr_samples > 0) {
 		/* fire another conversion for this */
-
+		client->selected = 1;
 		client->select_cb(client, 1);
 		s3c_adc_convert(adc);
 	} else {
 		local_irq_save(flags);
-		(client->select_cb)(client, 0);
+		client->selected = 0;
+		if (!adc->cur->is_ts)
+			list_del(&adc->cur->pend);
+		else
+			adc->ts_pend = NULL;
 		adc->cur = NULL;
 
+		(client->select_cb)(client, 0);
+
 		s3c_adc_try(adc);
 		local_irq_restore(flags);
 	}
@@ -392,20 +401,43 @@ static int s3c_adc_suspend(struct platform_device *pdev, pm_message_t state)
 	writel(con, adc->regs + S3C2410_ADCCON);
 
 	clk_disable(adc->clk);
+	disable_irq(IRQ_ADC);
+	if (!list_empty(&adc_pending) || adc->ts_pend)
+		dev_info(&pdev->dev, "We still have adc clients pending\n");
 
 	return 0;
 }
 
+/* It seems this is not needed. This is under upstream review now. */
+static void adc_resume_work(struct work_struct *work)
+{
+	if (!adc_dev) /* Have no ADC here */
+		return;
+
+	if (!list_empty(&adc_pending) || adc_dev->ts_pend)
+		/* We still have adc clients pending */
+		s3c_adc_try(adc_dev);
+}
+
 static int s3c_adc_resume(struct platform_device *pdev)
 {
 	struct adc_device *adc = platform_get_drvdata(pdev);
 
+	enable_irq(IRQ_ADC);
 	clk_enable(adc->clk);
 
 	writel(adc->prescale | S3C2410_ADCCON_PRSCEN,
 	       adc->regs + S3C2410_ADCCON);
 	writel(adc->delay, adc->regs + S3C2410_ADCDLY);
 
+	/* Schedule task if there are clients pending. */
+	if (!list_empty(&adc_pending) || adc_dev->ts_pend) {
+		INIT_WORK(&resume_work, adc_resume_work);
+		if (!schedule_work(&resume_work))
+			dev_err(&pdev->dev,
+				"Failed to schedule adc_resume work!\n");
+	}
+
 	return 0;
 }
 
-- 
cgit v1.2.3


From 98b541c7129eb1b884433bf28d09527875081fc6 Mon Sep 17 00:00:00 2001
From: Nelson Castillo <arhuaco@freaks-unidos.net>
Date: Sat, 24 Oct 2009 14:25:45 -0500
Subject: touchscreen patches for om-gta02-2.6.31

On Sat, Oct 24, 2009 at 3:04 AM, Nelson Castillo
<arhuaco@freaks-unidos.net> wrote:
> Hi there. I finally made this work. I tested with: cat /dev/input/touchscreen0 | hexdump
>
> I wonder why it didn't work with X... This rootfs works with other drivers I've tested (even with the upstream kernel).

Problem found.
Patch attached.

From: Nelson Castillo <arhuaco@freaks-unidos.net>
Date: Sat, 24 Oct 2009 14:12:58 -0500
Subject: [PATCH] Add auto-pst

Without these lines the TS doesn't work.
I didn't check who the author of the lines is.

Signed-off-by: Nelson Castillo <arhuaco@freaks-unidos.net>
---
 arch/arm/mach-s3c2410/include/mach/ts.h | 2 +-
 arch/arm/plat-s3c24xx/adc.c             | 8 ++++++++
 2 files changed, 9 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-s3c2410/include/mach/ts.h b/arch/arm/mach-s3c2410/include/mach/ts.h
index ffd73d5bda2..ac0c727d155 100644
--- a/arch/arm/mach-s3c2410/include/mach/ts.h
+++ b/arch/arm/mach-s3c2410/include/mach/ts.h
@@ -16,7 +16,7 @@
 #ifndef __ASM_ARM_TS_H
 #define __ASM_ARM_TS_H
 
-#include <../drivers/input/touchscreen/ts_filter.h>
+#include <linux/input/touchscreen/ts_filter.h>
 
 struct s3c2410_ts_mach_info {
 	/* Touchscreen delay. */
diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
index 3b16670b003..8c443153d05 100644
--- a/arch/arm/plat-s3c24xx/adc.c
+++ b/arch/arm/plat-s3c24xx/adc.c
@@ -76,10 +76,18 @@ static LIST_HEAD(adc_pending);
 
 #define adc_dbg(_adc, msg...) dev_dbg(&(_adc)->pdev->dev, msg)
 
+#define AUTOPST	(S3C2410_ADCTSC_YM_SEN | S3C2410_ADCTSC_YP_SEN | \
+		S3C2410_ADCTSC_XP_SEN | S3C2410_ADCTSC_AUTO_PST | \
+		S3C2410_ADCTSC_XY_PST(0))
+
 static inline void s3c_adc_convert(struct adc_device *adc)
 {
 	unsigned con = readl(adc->regs + S3C2410_ADCCON);
 
+	if (adc->cur->is_ts)
+		writel(S3C2410_ADCTSC_PULL_UP_DISABLE | AUTOPST,
+		       adc->regs + S3C2410_ADCTSC);
+
 	con |= S3C2410_ADCCON_ENABLE_START;
 	writel(con, adc->regs + S3C2410_ADCCON);
 }
-- 
cgit v1.2.3