From 41d8ca452f523b9245704c7dd8ef290fa7b78e6b Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Fri, 16 Feb 2007 13:56:11 +0100 Subject: [AVR32] Use per-controller spi_board_info structures Set up one spi_board_info array per controller and pass this to at32_add_device_spi so that it can set up any GPIO pins for chip selects based on this information. Extracted from a patch by David Brownell and adapted slightly. Signed-off-by: Haavard Skinnemoen --- arch/avr32/mach-at32ap/at32ap7000.c | 55 +++++++++++++++++++++++++------------ 1 file changed, 38 insertions(+), 17 deletions(-) (limited to 'arch/avr32/mach-at32ap') diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c index a5037aa102f..bc235507c5c 100644 --- a/arch/avr32/mach-at32ap/at32ap7000.c +++ b/arch/avr32/mach-at32ap/at32ap7000.c @@ -8,6 +8,7 @@ #include #include #include +#include #include @@ -751,8 +752,41 @@ static struct resource atmel_spi1_resource[] = { DEFINE_DEV(atmel_spi, 1); DEV_CLK(spi_clk, atmel_spi1, pba, 1); -struct platform_device *__init at32_add_device_spi(unsigned int id) +static void +at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b, + unsigned int n, const u8 *pins) { + unsigned int pin, mode; + + for (; n; n--, b++) { + b->bus_num = bus_num; + if (b->chip_select >= 4) + continue; + pin = (unsigned)b->controller_data; + if (!pin) { + pin = pins[b->chip_select]; + b->controller_data = (void *)pin; + } + mode = AT32_GPIOF_OUTPUT; + if (!(b->mode & SPI_CS_HIGH)) + mode |= AT32_GPIOF_HIGH; + at32_select_gpio(pin, mode); + } +} + +struct platform_device *__init +at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n) +{ + /* + * Manage the chipselects as GPIOs, normally using the same pins + * the SPI controller expects; but boards can use other pins. + */ + static u8 __initdata spi0_pins[] = + { GPIO_PIN_PA(3), GPIO_PIN_PA(4), + GPIO_PIN_PA(5), GPIO_PIN_PA(20), }; + static u8 __initdata spi1_pins[] = + { GPIO_PIN_PB(2), GPIO_PIN_PB(3), + GPIO_PIN_PB(4), GPIO_PIN_PA(27), }; struct platform_device *pdev; switch (id) { @@ -761,14 +795,7 @@ struct platform_device *__init at32_add_device_spi(unsigned int id) select_peripheral(PA(0), PERIPH_A, 0); /* MISO */ select_peripheral(PA(1), PERIPH_A, 0); /* MOSI */ select_peripheral(PA(2), PERIPH_A, 0); /* SCK */ - - /* NPCS[2:0] */ - at32_select_gpio(GPIO_PIN_PA(3), - AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); - at32_select_gpio(GPIO_PIN_PA(4), - AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); - at32_select_gpio(GPIO_PIN_PA(5), - AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); + at32_spi_setup_slaves(0, b, n, spi0_pins); break; case 1: @@ -776,20 +803,14 @@ struct platform_device *__init at32_add_device_spi(unsigned int id) select_peripheral(PB(0), PERIPH_B, 0); /* MISO */ select_peripheral(PB(1), PERIPH_B, 0); /* MOSI */ select_peripheral(PB(5), PERIPH_B, 0); /* SCK */ - - /* NPCS[2:0] */ - at32_select_gpio(GPIO_PIN_PB(2), - AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); - at32_select_gpio(GPIO_PIN_PB(3), - AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); - at32_select_gpio(GPIO_PIN_PB(4), - AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); + at32_spi_setup_slaves(1, b, n, spi1_pins); break; default: return NULL; } + spi_register_board_info(b, n); platform_device_register(pdev); return pdev; } -- cgit v1.2.3