From 904f7a3f042b5c6aa9e53ce83f2c9de5e33170ff Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Fri, 18 May 2007 13:22:28 -0400 Subject: [CPUFREQ] powernow-k8: clarify number of cores. Indicate number of processors and cores more cleanly in startup messages. Signed-off-by: Mark Langsdorf Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/powernow-k8.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch/i386/kernel') diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c index 4ade55c5f33..97733683412 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c @@ -1330,8 +1330,9 @@ static int __cpuinit powernowk8_init(void) if (supported_cpus == num_online_cpus()) { printk(KERN_INFO PFX "Found %d %s " - "processors (" VERSION ")\n", supported_cpus, - boot_cpu_data.x86_model_id); + "processors (%d cpu cores) (" VERSION ")\n", + supported_cpus/cpu_data[0].booted_cores, + boot_cpu_data.x86_model_id, supported_cpus); return cpufreq_register_driver(&cpufreq_amd64_driver); } -- cgit v1.2.3 From 7d5edcc028f1bed2542a96edc2356e484f01ee47 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Bilski?= Date: Thu, 17 May 2007 22:33:46 +0200 Subject: [CPUFREQ] Longhaul - Use all kinds of support This patch is removing southbridge support as separate kind of support. Instead it is used to make other kinds of support more stable. Also northbridge and ACPI C3 support both will be used if both are available. Signed-off-by: Rafal Bilski Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/longhaul.c | 33 +++++++++++---------------------- 1 file changed, 11 insertions(+), 22 deletions(-) (limited to 'arch/i386/kernel') diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index a3df9c039bd..f85cff4ebba 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -55,7 +55,6 @@ /* Flags */ #define USE_ACPI_C3 (1 << 1) #define USE_NORTHBRIDGE (1 << 2) -#define USE_VT8235 (1 << 3) static int cpu_model; static unsigned int numscales=16; @@ -627,7 +626,7 @@ static int enable_arbiter_disable(void) return 0; } -static int longhaul_setup_vt8235(void) +static int longhaul_setup_southbridge(void) { struct pci_dev *dev; u8 pci_cmd; @@ -657,7 +656,6 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) char *cpuname=NULL; int ret; u32 lo, hi; - int vt8235_present; /* Check what we have on this motherboard */ switch (c->x86_model) { @@ -755,7 +753,7 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) }; /* Doesn't hurt */ - vt8235_present = longhaul_setup_vt8235(); + longhaul_setup_southbridge(); /* Find ACPI data for processor */ acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT, @@ -765,35 +763,26 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) /* Check ACPI support for C3 state */ if (pr != NULL && longhaul_version == TYPE_POWERSAVER) { cx = &pr->power.states[ACPI_STATE_C3]; - if (cx->address > 0 && cx->latency <= 1000) { + if (cx->address > 0 && cx->latency <= 1000) longhaul_flags |= USE_ACPI_C3; - goto print_support_type; - } } /* Check if northbridge is friendly */ - if (enable_arbiter_disable()) { + if (enable_arbiter_disable()) longhaul_flags |= USE_NORTHBRIDGE; - goto print_support_type; - } - /* Use VT8235 southbridge if present */ - if (longhaul_version == TYPE_POWERSAVER && vt8235_present) { - longhaul_flags |= USE_VT8235; - goto print_support_type; - } + /* Check ACPI support for bus master arbiter disable */ - if ((pr == NULL) || !(pr->flags.bm_control)) { + if (!(longhaul_flags & USE_ACPI_C3 + || longhaul_flags & USE_NORTHBRIDGE) + && ((pr == NULL) || !(pr->flags.bm_control))) { printk(KERN_ERR PFX "No ACPI support. Unsupported northbridge.\n"); return -ENODEV; } -print_support_type: if (longhaul_flags & USE_NORTHBRIDGE) - printk (KERN_INFO PFX "Using northbridge support.\n"); - else if (longhaul_flags & USE_VT8235) - printk (KERN_INFO PFX "Using VT8235 support.\n"); - else - printk (KERN_INFO PFX "Using ACPI support.\n"); + printk(KERN_INFO PFX "Using northbridge support.\n"); + if (longhaul_flags & USE_ACPI_C3) + printk(KERN_INFO PFX "Using ACPI support.\n"); ret = longhaul_get_ranges(); if (ret != 0) -- cgit v1.2.3 From 920dd0fbba1a7aa34c45b73699dcaf092850df51 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Bilski?= Date: Thu, 17 May 2007 22:35:29 +0200 Subject: [CPUFREQ] Longhaul - VT8237 support Looks like VT8237 has the same bits which VT8235 has. Poke registers if it is found. Signed-off-by: Rafal Bilski Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/longhaul.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/i386/kernel') diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index f85cff4ebba..d004e073b47 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -633,6 +633,10 @@ static int longhaul_setup_southbridge(void) /* Find VT8235 southbridge */ dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, NULL); + if (dev == NULL) + /* Find VT8237 southbridge */ + dev = pci_get_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_8237, NULL); if (dev != NULL) { /* Set transition time to max */ pci_read_config_byte(dev, 0xec, &pci_cmd); -- cgit v1.2.3 From 1b11d4ca6d9d7ea3ace9d241e52cc5fe3cfe3d8f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Bilski?= Date: Thu, 17 May 2007 22:36:42 +0200 Subject: [CPUFREQ] Longhaul - Move old_ratio to correct place Move one line where it should be. After first transition Longhaul will skip frequency transition if destination frequency is already set. Signed-off-by: Rafal Bilski Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/longhaul.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/i386/kernel') diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index d004e073b47..504c6c9107d 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -87,6 +87,7 @@ static int clock_ratio[32]; static int eblcr_table[32]; static int longhaul_version; static struct cpufreq_frequency_table *longhaul_table; +static unsigned int old_ratio = -1; #ifdef CONFIG_CPU_FREQ_DEBUG static char speedbuffer[8]; @@ -251,7 +252,6 @@ static void longhaul_setstate(unsigned int clock_ratio_index) { int speed, mult; struct cpufreq_freqs freqs; - static unsigned int old_ratio=-1; unsigned long flags; unsigned int pic1_mask, pic2_mask; -- cgit v1.2.3 From 489dc5cb18932d3cedaef03e84890475db17a843 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Bilski?= Date: Thu, 17 May 2007 22:39:02 +0200 Subject: [CPUFREQ] Longhaul - Check ACPI "BM DMA in progress" bit It is good idea to wait for PCI bus to become idle before frequency change. Thanks to ACPI it is possible. It makes sense only when northbridge support is in use because it is only case in which we can disable arbiter after check if PCI bus is busy. Signed-off-by: Rafal Bilski Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/longhaul.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'arch/i386/kernel') diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index 504c6c9107d..ff482966647 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -254,6 +254,8 @@ static void longhaul_setstate(unsigned int clock_ratio_index) struct cpufreq_freqs freqs; unsigned long flags; unsigned int pic1_mask, pic2_mask; + u32 bm_status = 0; + u32 bm_timeout = 100000; if (old_ratio == clock_ratio_index) return; @@ -284,6 +286,18 @@ static void longhaul_setstate(unsigned int clock_ratio_index) outb(0xFF,0xA1); /* Overkill */ outb(0xFE,0x21); /* TMR0 only */ + /* Wait while PCI bus is busy. */ + if (longhaul_flags & USE_NORTHBRIDGE + || ((pr != NULL) && pr->flags.bm_control)) { + acpi_get_register(ACPI_BITREG_BUS_MASTER_STATUS, &bm_status); + while (bm_status && bm_timeout) { + acpi_set_register(ACPI_BITREG_BUS_MASTER_STATUS, 1); + bm_timeout--; + acpi_get_register(ACPI_BITREG_BUS_MASTER_STATUS, + &bm_status); + } + } + if (longhaul_flags & USE_NORTHBRIDGE) { /* Disable AGP and PCI arbiters */ outb(3, 0x22); @@ -335,6 +349,10 @@ static void longhaul_setstate(unsigned int clock_ratio_index) freqs.new = calc_speed(longhaul_get_cpu_mult()); cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + if (!bm_timeout) + printk(KERN_INFO PFX "Warning: Timeout while waiting for " + "idle PCI bus.\n"); } /* -- cgit v1.2.3 From 13424f6514f6444554a103362dd9d31eabbbdc54 Mon Sep 17 00:00:00 2001 From: Venki Pallipadi Date: Wed, 23 May 2007 15:42:13 -0700 Subject: [CPUFREQ] acpi-cpufreq: Proper ReadModifyWrite of PERF_CTL MSR During recent acpi-cpufreq changes, writing to PERF_CTL msr changed from RMW of entire 64 bit to RMW of low 32 bit and clearing of upper 32 bit. Fix it back to do a proper RMW of the MSR. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) (limited to 'arch/i386/kernel') diff --git a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c index 10baa3501ed..18c8b67ea3a 100644 --- a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -167,11 +167,13 @@ static void do_drv_read(struct drv_cmd *cmd) static void do_drv_write(struct drv_cmd *cmd) { - u32 h = 0; + u32 lo, hi; switch (cmd->type) { case SYSTEM_INTEL_MSR_CAPABLE: - wrmsr(cmd->addr.msr.reg, cmd->val, h); + rdmsr(cmd->addr.msr.reg, lo, hi); + lo = (lo & ~INTEL_MSR_RANGE) | (cmd->val & INTEL_MSR_RANGE); + wrmsr(cmd->addr.msr.reg, lo, hi); break; case SYSTEM_IO_CAPABLE: acpi_os_write_port((acpi_io_address)cmd->addr.io.port, @@ -372,7 +374,6 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy, struct cpufreq_freqs freqs; cpumask_t online_policy_cpus; struct drv_cmd cmd; - unsigned int msr; unsigned int next_state = 0; /* Index into freq_table */ unsigned int next_perf_state = 0; /* Index into perf table */ unsigned int i; @@ -417,11 +418,7 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy, case SYSTEM_INTEL_MSR_CAPABLE: cmd.type = SYSTEM_INTEL_MSR_CAPABLE; cmd.addr.msr.reg = MSR_IA32_PERF_CTL; - msr = - (u32) perf->states[next_perf_state]. - control & INTEL_MSR_RANGE; - cmd.val = get_cur_val(online_policy_cpus); - cmd.val = (cmd.val & ~INTEL_MSR_RANGE) | msr; + cmd.val = (u32) perf->states[next_perf_state].control; break; case SYSTEM_IO_CAPABLE: cmd.type = SYSTEM_IO_CAPABLE; -- cgit v1.2.3 From 73e107d4a156affeed510cf5745177fd893878f1 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Bilski?= Date: Mon, 28 May 2007 21:56:19 +0200 Subject: [CPUFREQ] Longhaul - Embedded "conservative" Longhaul with voltage scaling enabled works great on Ezra CPU (Longhaul ver. 2). As long as "conservative" governor is used. Both "ondemand" and "userspace" can change voltage from min to max at once. Motherboard unfortunatly turns off when vid difference is big. Longhaul was printing warning message, but it is not enough. Now driver will have "conservative" governor built in and will split bigger changes to smaller ones. Signed-off-by: Rafal Bilski Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/longhaul.c | 145 +++++++++++++++++++++----------- 1 file changed, 96 insertions(+), 49 deletions(-) (limited to 'arch/i386/kernel') diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index ff482966647..dde4e314917 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include @@ -62,11 +63,6 @@ static unsigned int fsb; static const struct mV_pos *vrm_mV_table; static const unsigned char *mV_vrm_table; -struct f_msr { - u8 vrm; - u8 pos; -}; -static struct f_msr f_msr_table[32]; static unsigned int highest_speed, lowest_speed; /* kHz */ static unsigned int minmult, maxmult; @@ -74,7 +70,7 @@ static int can_scale_voltage; static struct acpi_processor *pr = NULL; static struct acpi_processor_cx *cx = NULL; static u8 longhaul_flags; -static u8 longhaul_pos; +static unsigned int longhaul_index; /* Module parameters */ static int scale_voltage; @@ -87,7 +83,6 @@ static int clock_ratio[32]; static int eblcr_table[32]; static int longhaul_version; static struct cpufreq_frequency_table *longhaul_table; -static unsigned int old_ratio = -1; #ifdef CONFIG_CPU_FREQ_DEBUG static char speedbuffer[8]; @@ -144,7 +139,7 @@ static void do_longhaul1(unsigned int clock_ratio_index) rdmsrl(MSR_VIA_BCR2, bcr2.val); /* Enable software clock multiplier */ bcr2.bits.ESOFTBF = 1; - bcr2.bits.CLOCKMUL = clock_ratio_index; + bcr2.bits.CLOCKMUL = clock_ratio_index & 0xff; /* Sync to timer tick */ safe_halt(); @@ -163,14 +158,12 @@ static void do_longhaul1(unsigned int clock_ratio_index) /* For processor with Longhaul MSR */ -static void do_powersaver(int cx_address, unsigned int clock_ratio_index) +static void do_powersaver(int cx_address, unsigned int clock_ratio_index, + unsigned int dir) { union msr_longhaul longhaul; - u8 dest_pos; u32 t; - dest_pos = f_msr_table[clock_ratio_index].pos; - rdmsrl(MSR_VIA_LONGHAUL, longhaul.val); /* Setup new frequency */ longhaul.bits.RevisionKey = longhaul.bits.RevisionID; @@ -178,11 +171,11 @@ static void do_powersaver(int cx_address, unsigned int clock_ratio_index) longhaul.bits.SoftBusRatio4 = (clock_ratio_index & 0x10) >> 4; /* Setup new voltage */ if (can_scale_voltage) - longhaul.bits.SoftVID = f_msr_table[clock_ratio_index].vrm; + longhaul.bits.SoftVID = (clock_ratio_index >> 8) & 0x1f; /* Sync to timer tick */ safe_halt(); /* Raise voltage if necessary */ - if (can_scale_voltage && longhaul_pos < dest_pos) { + if (can_scale_voltage && dir) { longhaul.bits.EnableSoftVID = 1; wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); /* Change voltage */ @@ -199,7 +192,6 @@ static void do_powersaver(int cx_address, unsigned int clock_ratio_index) } longhaul.bits.EnableSoftVID = 0; wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); - longhaul_pos = dest_pos; } /* Change frequency on next halt or sleep */ @@ -220,7 +212,7 @@ static void do_powersaver(int cx_address, unsigned int clock_ratio_index) wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); /* Reduce voltage if necessary */ - if (can_scale_voltage && longhaul_pos > dest_pos) { + if (can_scale_voltage && !dir) { longhaul.bits.EnableSoftVID = 1; wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); /* Change voltage */ @@ -237,7 +229,6 @@ static void do_powersaver(int cx_address, unsigned int clock_ratio_index) } longhaul.bits.EnableSoftVID = 0; wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); - longhaul_pos = dest_pos; } } @@ -248,26 +239,28 @@ static void do_powersaver(int cx_address, unsigned int clock_ratio_index) * Sets a new clock ratio. */ -static void longhaul_setstate(unsigned int clock_ratio_index) +static void longhaul_setstate(unsigned int table_index) { + unsigned int clock_ratio_index; int speed, mult; struct cpufreq_freqs freqs; unsigned long flags; unsigned int pic1_mask, pic2_mask; u32 bm_status = 0; u32 bm_timeout = 100000; + unsigned int dir = 0; - if (old_ratio == clock_ratio_index) - return; - old_ratio = clock_ratio_index; - - mult = clock_ratio[clock_ratio_index]; + clock_ratio_index = longhaul_table[table_index].index; + /* Safety precautions */ + mult = clock_ratio[clock_ratio_index & 0x1f]; if (mult == -1) return; - speed = calc_speed(mult); if ((speed > highest_speed) || (speed < lowest_speed)) return; + /* Voltage transition before frequency transition? */ + if (can_scale_voltage && longhaul_index < table_index) + dir = 1; freqs.old = calc_speed(longhaul_get_cpu_mult()); freqs.new = speed; @@ -302,7 +295,7 @@ static void longhaul_setstate(unsigned int clock_ratio_index) /* Disable AGP and PCI arbiters */ outb(3, 0x22); } else if ((pr != NULL) && pr->flags.bm_control) { - /* Disable bus master arbitration */ + /* Disable bus master arbitration */ acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1); } switch (longhaul_version) { @@ -327,9 +320,9 @@ static void longhaul_setstate(unsigned int clock_ratio_index) if (longhaul_flags & USE_ACPI_C3) { /* Don't allow wakeup */ acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0); - do_powersaver(cx->address, clock_ratio_index); + do_powersaver(cx->address, clock_ratio_index, dir); } else { - do_powersaver(0, clock_ratio_index); + do_powersaver(0, clock_ratio_index, dir); } break; } @@ -386,7 +379,8 @@ static int guess_fsb(int mult) static int __init longhaul_get_ranges(void) { - unsigned int j, k = 0; + unsigned int i, j, k = 0; + unsigned int ratio; int mult; /* Get current frequency */ @@ -440,8 +434,7 @@ static int __init longhaul_get_ranges(void) if(!longhaul_table) return -ENOMEM; - for (j=0; j < numscales; j++) { - unsigned int ratio; + for (j = 0; j < numscales; j++) { ratio = clock_ratio[j]; if (ratio == -1) continue; @@ -451,13 +444,41 @@ static int __init longhaul_get_ranges(void) longhaul_table[k].index = j; k++; } + if (k <= 1) { + kfree(longhaul_table); + return -ENODEV; + } + /* Sort */ + for (j = 0; j < k - 1; j++) { + unsigned int min_f, min_i; + min_f = longhaul_table[j].frequency; + min_i = j; + for (i = j + 1; i < k; i++) { + if (longhaul_table[i].frequency < min_f) { + min_f = longhaul_table[i].frequency; + min_i = i; + } + } + if (min_i != j) { + unsigned int temp; + temp = longhaul_table[j].frequency; + longhaul_table[j].frequency = longhaul_table[min_i].frequency; + longhaul_table[min_i].frequency = temp; + temp = longhaul_table[j].index; + longhaul_table[j].index = longhaul_table[min_i].index; + longhaul_table[min_i].index = temp; + } + } longhaul_table[k].frequency = CPUFREQ_TABLE_END; - if (!k) { - kfree (longhaul_table); - return -EINVAL; - } + /* Find index we are running on */ + for (j = 0; j < k; j++) { + if (clock_ratio[longhaul_table[j].index & 0x1f] == mult) { + longhaul_index = j; + break; + } + } return 0; } @@ -465,7 +486,7 @@ static int __init longhaul_get_ranges(void) static void __init longhaul_setup_voltagescaling(void) { union msr_longhaul longhaul; - struct mV_pos minvid, maxvid; + struct mV_pos minvid, maxvid, vid; unsigned int j, speed, pos, kHz_step, numvscales; int min_vid_speed; @@ -476,11 +497,11 @@ static void __init longhaul_setup_voltagescaling(void) } if (!longhaul.bits.VRMRev) { - printk (KERN_INFO PFX "VRM 8.5\n"); + printk(KERN_INFO PFX "VRM 8.5\n"); vrm_mV_table = &vrm85_mV[0]; mV_vrm_table = &mV_vrm85[0]; } else { - printk (KERN_INFO PFX "Mobile VRM\n"); + printk(KERN_INFO PFX "Mobile VRM\n"); if (cpu_model < CPU_NEHEMIAH) return; vrm_mV_table = &mobilevrm_mV[0]; @@ -540,7 +561,6 @@ static void __init longhaul_setup_voltagescaling(void) /* Calculate kHz for one voltage step */ kHz_step = (highest_speed - min_vid_speed) / numvscales; - j = 0; while (longhaul_table[j].frequency != CPUFREQ_TABLE_END) { speed = longhaul_table[j].frequency; @@ -548,15 +568,14 @@ static void __init longhaul_setup_voltagescaling(void) pos = (speed - min_vid_speed) / kHz_step + minvid.pos; else pos = minvid.pos; - f_msr_table[longhaul_table[j].index].vrm = mV_vrm_table[pos]; - f_msr_table[longhaul_table[j].index].pos = pos; + longhaul_table[j].index |= mV_vrm_table[pos] << 8; + vid = vrm_mV_table[mV_vrm_table[pos]]; + printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n", speed, j, vid.mV); j++; } - longhaul_pos = maxvid.pos; can_scale_voltage = 1; - printk(KERN_INFO PFX "Voltage scaling enabled. " - "Use of \"conservative\" governor is highly recommended.\n"); + printk(KERN_INFO PFX "Voltage scaling enabled.\n"); } @@ -570,15 +589,44 @@ static int longhaul_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) { unsigned int table_index = 0; - unsigned int new_clock_ratio = 0; + unsigned int i; + unsigned int dir = 0; + u8 vid, current_vid; if (cpufreq_frequency_table_target(policy, longhaul_table, target_freq, relation, &table_index)) return -EINVAL; - new_clock_ratio = longhaul_table[table_index].index & 0xFF; - - longhaul_setstate(new_clock_ratio); + /* Don't set same frequency again */ + if (longhaul_index == table_index) + return 0; + if (!can_scale_voltage) + longhaul_setstate(table_index); + else { + /* On test system voltage transitions exceeding single + * step up or down were turning motherboard off. Both + * "ondemand" and "userspace" are unsafe. C7 is doing + * this in hardware, C3 is old and we need to do this + * in software. */ + i = longhaul_index; + current_vid = (longhaul_table[longhaul_index].index >> 8) & 0x1f; + if (table_index > longhaul_index) + dir = 1; + while (i != table_index) { + vid = (longhaul_table[i].index >> 8) & 0x1f; + if (vid != current_vid) { + longhaul_setstate(i); + current_vid = vid; + msleep(200); + } + if (dir) + i++; + else + i--; + } + longhaul_setstate(table_index); + } + longhaul_index = table_index; return 0; } @@ -607,11 +655,10 @@ static acpi_status longhaul_walk_callback(acpi_handle obj_handle, static int enable_arbiter_disable(void) { struct pci_dev *dev; - int status; + int status = 1; int reg; u8 pci_cmd; - status = 1; /* Find PLE133 host bridge */ reg = 0x78; dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8601_0, -- cgit v1.2.3 From ce243823af4fee3ab82e1da6b710fbc5f859ad8c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Bilski?= Date: Mon, 28 May 2007 21:58:09 +0200 Subject: [CPUFREQ] Longhaul - Remove duplicate multipliers Remove duplicate multipliers in clock_ratio table. On 1,4GHz Nehemiah two frequencies are present twice in table. It isn't fatal, but with voltage scaling enabled each will be set twice. Signed-off-by: Rafal Bilski Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/longhaul.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch/i386/kernel') diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.h b/arch/i386/kernel/cpu/cpufreq/longhaul.h index 102548f1284..4fcc320997d 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.h +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.h @@ -180,7 +180,7 @@ static const int __initdata ezrat_clock_ratio[32] = { -1, /* 0000 -> RESERVED (10.0x) */ 110, /* 0001 -> 11.0x */ - 120, /* 0010 -> 12.0x */ + -1, /* 0010 -> 12.0x */ -1, /* 0011 -> RESERVED (9.0x)*/ 105, /* 0100 -> 10.5x */ 115, /* 0101 -> 11.5x */ @@ -237,7 +237,7 @@ static const int __initdata ezrat_eblcr[32] = { static const int __initdata nehemiah_clock_ratio[32] = { 100, /* 0000 -> 10.0x */ - 160, /* 0001 -> 16.0x */ + -1, /* 0001 -> 16.0x */ 40, /* 0010 -> 4.0x */ 90, /* 0011 -> 9.0x */ 95, /* 0100 -> 9.5x */ @@ -252,10 +252,10 @@ static const int __initdata nehemiah_clock_ratio[32] = { 75, /* 1101 -> 7.5x */ 85, /* 1110 -> 8.5x */ 120, /* 1111 -> 12.0x */ - 100, /* 0000 -> 10.0x */ + -1, /* 0000 -> 10.0x */ 110, /* 0001 -> 11.0x */ - 120, /* 0010 -> 12.0x */ - 90, /* 0011 -> 9.0x */ + -1, /* 0010 -> 12.0x */ + -1, /* 0011 -> 9.0x */ 105, /* 0100 -> 10.5x */ 115, /* 0101 -> 11.5x */ 125, /* 0110 -> 12.5x */ @@ -267,7 +267,7 @@ static const int __initdata nehemiah_clock_ratio[32] = { 145, /* 1100 -> 14.5x */ 155, /* 1101 -> 15.5x */ -1, /* 1110 -> RESERVED (13.0x) */ - 120, /* 1111 -> 12.0x */ + -1, /* 1111 -> 12.0x */ }; static const int __initdata nehemiah_eblcr[32] = { -- cgit v1.2.3 From 275bc6b7f6429afb8d7a883c2e267547dd899066 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Bilski?= Date: Tue, 5 Jun 2007 22:08:50 +0200 Subject: [CPUFREQ] Longhaul - Replace ACPI functions with direct I/O Current version of "bm status" bit test works as long as no USB device is in use. When USB device is plugged in ACPI function in this context is always returning 1. Until reboot. Direct I/O is working fine even when many USB devices are connected. Change bm_timeout value to less annoying. 1000 is still much more then worst case observed and it is much better when status bit gets stuck. Signed-off-by: Rafal Bilski Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/longhaul.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-) (limited to 'arch/i386/kernel') diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index dde4e314917..2841735e3fe 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -69,6 +69,7 @@ static unsigned int minmult, maxmult; static int can_scale_voltage; static struct acpi_processor *pr = NULL; static struct acpi_processor_cx *cx = NULL; +static u32 acpi_regs_addr; static u8 longhaul_flags; static unsigned int longhaul_index; @@ -247,7 +248,7 @@ static void longhaul_setstate(unsigned int table_index) unsigned long flags; unsigned int pic1_mask, pic2_mask; u32 bm_status = 0; - u32 bm_timeout = 100000; + u32 bm_timeout = 1000; unsigned int dir = 0; clock_ratio_index = longhaul_table[table_index].index; @@ -282,12 +283,13 @@ static void longhaul_setstate(unsigned int table_index) /* Wait while PCI bus is busy. */ if (longhaul_flags & USE_NORTHBRIDGE || ((pr != NULL) && pr->flags.bm_control)) { - acpi_get_register(ACPI_BITREG_BUS_MASTER_STATUS, &bm_status); + bm_status = inl(acpi_regs_addr); + bm_status &= 1 << 4; while (bm_status && bm_timeout) { - acpi_set_register(ACPI_BITREG_BUS_MASTER_STATUS, 1); + outl(1 << 4, acpi_regs_addr); bm_timeout--; - acpi_get_register(ACPI_BITREG_BUS_MASTER_STATUS, - &bm_status); + bm_status = inl(acpi_regs_addr); + bm_status &= 1 << 4; } } @@ -344,8 +346,7 @@ static void longhaul_setstate(unsigned int table_index) cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); if (!bm_timeout) - printk(KERN_INFO PFX "Warning: Timeout while waiting for " - "idle PCI bus.\n"); + printk(KERN_INFO PFX "Warning: Timeout while waiting for idle PCI bus.\n"); } /* @@ -713,6 +714,14 @@ static int longhaul_setup_southbridge(void) pci_read_config_byte(dev, 0xe5, &pci_cmd); pci_cmd |= 1 << 7; pci_write_config_byte(dev, 0xe5, pci_cmd); + /* Get address of ACPI registers block*/ + pci_read_config_byte(dev, 0x81, &pci_cmd); + if (pci_cmd & 1 << 7) { + pci_read_config_dword(dev, 0x88, &acpi_regs_addr); + acpi_regs_addr &= 0xff00; + printk(KERN_INFO PFX "ACPI I/O at 0x%x\n", acpi_regs_addr); + } + pci_dev_put(dev); return 1; } -- cgit v1.2.3 From e8666b2718fdb5bf0ea7c3126f7e292bbbf2946b Mon Sep 17 00:00:00 2001 From: Joshua Hoblitt Date: Mon, 21 May 2007 16:47:43 -1000 Subject: [CPUFREQ] Kconfig powernow-k8 driver should depend on ACPI P-States driver powernow-k8 really needs to use ACPI to function on SMP systems. The current Kconfig allows us to build kernels which fail mysteriously for some users due to us trying to automatically enable this, and getting it wrong. It's easier to just present this as an option to the user. Signed-off-by: Joshua Hoblitt Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/Kconfig | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) (limited to 'arch/i386/kernel') diff --git a/arch/i386/kernel/cpu/cpufreq/Kconfig b/arch/i386/kernel/cpu/cpufreq/Kconfig index e912aae9473..e77754ca94b 100644 --- a/arch/i386/kernel/cpu/cpufreq/Kconfig +++ b/arch/i386/kernel/cpu/cpufreq/Kconfig @@ -90,10 +90,17 @@ config X86_POWERNOW_K8 If in doubt, say N. config X86_POWERNOW_K8_ACPI - bool - depends on X86_POWERNOW_K8 && ACPI_PROCESSOR - depends on !(X86_POWERNOW_K8 = y && ACPI_PROCESSOR = m) + bool "ACPI Support" + select ACPI_PROCESSOR + depends on X86_POWERNOW_K8 default y + help + This provides access to the K8s Processor Performance States via ACPI. + This driver is probably required for CPUFreq to work with multi-socket and + SMP systems. It is not required on at least some single-socket yet + multi-core systems, even if SMP is enabled. + + It is safe to say Y here. config X86_GX_SUSPMOD tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation" -- cgit v1.2.3 From 689eba77cbd0cfaaa3687cbe23e8b534f8ae0ebb Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Bilski?= Date: Thu, 7 Jun 2007 22:31:24 +0200 Subject: [CPUFREQ] Longhaul - Proper register access In previous commit I used u32 for u16 register. This code will work only when ACPI block address is set. For now it is only for VT8235 and VT8237. Signed-off-by: Rafal Bilski Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/cpufreq/longhaul.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch/i386/kernel') diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index 2841735e3fe..8eca59d4c8f 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -247,7 +247,7 @@ static void longhaul_setstate(unsigned int table_index) struct cpufreq_freqs freqs; unsigned long flags; unsigned int pic1_mask, pic2_mask; - u32 bm_status = 0; + u16 bm_status = 0; u32 bm_timeout = 1000; unsigned int dir = 0; @@ -281,14 +281,14 @@ static void longhaul_setstate(unsigned int table_index) outb(0xFE,0x21); /* TMR0 only */ /* Wait while PCI bus is busy. */ - if (longhaul_flags & USE_NORTHBRIDGE - || ((pr != NULL) && pr->flags.bm_control)) { - bm_status = inl(acpi_regs_addr); + if (acpi_regs_addr && (longhaul_flags & USE_NORTHBRIDGE + || ((pr != NULL) && pr->flags.bm_control))) { + bm_status = inw(acpi_regs_addr); bm_status &= 1 << 4; while (bm_status && bm_timeout) { - outl(1 << 4, acpi_regs_addr); + outw(1 << 4, acpi_regs_addr); bm_timeout--; - bm_status = inl(acpi_regs_addr); + bm_status = inw(acpi_regs_addr); bm_status &= 1 << 4; } } -- cgit v1.2.3