From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- arch/mips/ddb5xxx/ddb5074/Makefile | 8 + arch/mips/ddb5xxx/ddb5074/int-handler.S | 120 +++++++++++++ arch/mips/ddb5xxx/ddb5074/irq.c | 159 ++++++++++++++++++ arch/mips/ddb5xxx/ddb5074/nile4_pic.c | 287 ++++++++++++++++++++++++++++++++ arch/mips/ddb5xxx/ddb5074/setup.c | 235 ++++++++++++++++++++++++++ 5 files changed, 809 insertions(+) create mode 100644 arch/mips/ddb5xxx/ddb5074/Makefile create mode 100644 arch/mips/ddb5xxx/ddb5074/int-handler.S create mode 100644 arch/mips/ddb5xxx/ddb5074/irq.c create mode 100644 arch/mips/ddb5xxx/ddb5074/nile4_pic.c create mode 100644 arch/mips/ddb5xxx/ddb5074/setup.c (limited to 'arch/mips/ddb5xxx/ddb5074') diff --git a/arch/mips/ddb5xxx/ddb5074/Makefile b/arch/mips/ddb5xxx/ddb5074/Makefile new file mode 100644 index 00000000000..488206b8d94 --- /dev/null +++ b/arch/mips/ddb5xxx/ddb5074/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the NEC DDB Vrc-5074 specific kernel interface routines +# under Linux. +# + +obj-y += setup.o irq.o int-handler.o nile4_pic.o + +EXTRA_AFLAGS := $(CFLAGS) diff --git a/arch/mips/ddb5xxx/ddb5074/int-handler.S b/arch/mips/ddb5xxx/ddb5074/int-handler.S new file mode 100644 index 00000000000..a78644150b3 --- /dev/null +++ b/arch/mips/ddb5xxx/ddb5074/int-handler.S @@ -0,0 +1,120 @@ +/* + * arch/mips/ddb5074/int-handler.S -- NEC DDB Vrc-5074 interrupt handler + * + * Based on arch/mips/sgi/kernel/indyIRQ.S + * + * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) + * + * Copyright (C) 2000 Geert Uytterhoeven + * Sony Software Development Center Europe (SDCE), Brussels + */ +#include +#include +#include +#include + +/* A lot of complication here is taken away because: + * + * 1) We handle one interrupt and return, sitting in a loop and moving across + * all the pending IRQ bits in the cause register is _NOT_ the answer, the + * common case is one pending IRQ so optimize in that direction. + * + * 2) We need not check against bits in the status register IRQ mask, that + * would make this routine slow as hell. + * + * 3) Linux only thinks in terms of all IRQs on or all IRQs off, nothing in + * between like BSD spl() brain-damage. + * + * Furthermore, the IRQs on the INDY look basically (barring software IRQs + * which we don't use at all) like: + * + * MIPS IRQ Source + * -------- ------ + * 0 Software (ignored) + * 1 Software (ignored) + * 2 Local IRQ level zero + * 3 Local IRQ level one + * 4 8254 Timer zero + * 5 8254 Timer one + * 6 Bus Error + * 7 R4k timer (what we use) + * + * We handle the IRQ according to _our_ priority which is: + * + * Highest ---- R4k Timer + * Local IRQ zero + * Local IRQ one + * Bus Error + * 8254 Timer zero + * Lowest ---- 8254 Timer one + * + * then we just return, if multiple IRQs are pending then we will just take + * another exception, big deal. + */ + + .text + .set noreorder + .set noat + .align 5 + NESTED(ddbIRQ, PT_SIZE, sp) + SAVE_ALL + CLI + .set at + mfc0 s0, CP0_CAUSE # get irq mask + +#if 1 + mfc0 t2,CP0_STATUS # get enabled interrupts + and s0,t2 # isolate allowed ones +#endif + /* First we check for r4k counter/timer IRQ. */ + andi a0, s0, CAUSEF_IP2 # delay slot, check local level zero + beq a0, zero, 1f + andi a0, s0, CAUSEF_IP3 # delay slot, check local level one + + /* Wheee, local level zero interrupt. */ + jal ddb_local0_irqdispatch + move a0, sp # delay slot + + j ret_from_irq + nop # delay slot + +1: + beq a0, zero, 1f + andi a0, s0, CAUSEF_IP6 # delay slot, check bus error + + /* Wheee, local level one interrupt. */ + move a0, sp + jal ddb_local1_irqdispatch + nop + + j ret_from_irq + nop + +1: + beq a0, zero, 1f + nop + + /* Wheee, an asynchronous bus error... */ + move a0, sp + jal ddb_buserror_irq + nop + + j ret_from_irq + nop + +1: + /* Here by mistake? This is possible, what can happen + * is that by the time we take the exception the IRQ + * pin goes low, so just leave if this is the case. + */ + andi a0, s0, (CAUSEF_IP4 | CAUSEF_IP5) + beq a0, zero, 1f + + /* Must be one of the 8254 timers... */ + move a0, sp + jal ddb_8254timer_irq + nop +1: + j ret_from_irq + nop + END(ddbIRQ) diff --git a/arch/mips/ddb5xxx/ddb5074/irq.c b/arch/mips/ddb5xxx/ddb5074/irq.c new file mode 100644 index 00000000000..45088a1be41 --- /dev/null +++ b/arch/mips/ddb5xxx/ddb5074/irq.c @@ -0,0 +1,159 @@ +/* + * arch/mips/ddb5074/irq.c -- NEC DDB Vrc-5074 interrupt routines + * + * Copyright (C) 2000 Geert Uytterhoeven + * Sony Software Development Center Europe (SDCE), Brussels + */ +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + + +extern asmlinkage void ddbIRQ(void); + +static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL }; + +#define M1543_PNP_CONFIG 0x03f0 /* PnP Config Port */ +#define M1543_PNP_INDEX 0x03f0 /* PnP Index Port */ +#define M1543_PNP_DATA 0x03f1 /* PnP Data Port */ + +#define M1543_PNP_ALT_CONFIG 0x0370 /* Alternative PnP Config Port */ +#define M1543_PNP_ALT_INDEX 0x0370 /* Alternative PnP Index Port */ +#define M1543_PNP_ALT_DATA 0x0371 /* Alternative PnP Data Port */ + +#define M1543_INT1_MASTER_CTRL 0x0020 /* INT_1 (master) Control Register */ +#define M1543_INT1_MASTER_MASK 0x0021 /* INT_1 (master) Mask Register */ + +#define M1543_INT1_SLAVE_CTRL 0x00a0 /* INT_1 (slave) Control Register */ +#define M1543_INT1_SLAVE_MASK 0x00a1 /* INT_1 (slave) Mask Register */ + +#define M1543_INT1_MASTER_ELCR 0x04d0 /* INT_1 (master) Edge/Level Control */ +#define M1543_INT1_SLAVE_ELCR 0x04d1 /* INT_1 (slave) Edge/Level Control */ + + +static void m1543_irq_setup(void) +{ + /* + * The ALI M1543 has 13 interrupt inputs, IRQ1..IRQ13. Not all + * the possible IO sources in the M1543 are in use by us. We will + * use the following mapping: + * + * IRQ1 - keyboard (default set by M1543) + * IRQ3 - reserved for UART B (default set by M1543) (note that + * the schematics for the DDB Vrc-5074 board seem to + * indicate that IRQ3 is connected to the DS1386 + * watchdog timer interrupt output so we might have + * a conflict) + * IRQ4 - reserved for UART A (default set by M1543) + * IRQ5 - parallel (default set by M1543) + * IRQ8 - DS1386 time of day (RTC) interrupt + * IRQ12 - mouse + */ + + /* + * Assing mouse interrupt to IRQ12 + */ + + /* Enter configuration mode */ + outb(0x51, M1543_PNP_CONFIG); + outb(0x23, M1543_PNP_CONFIG); + + /* Select logical device 7 (Keyboard) */ + outb(0x07, M1543_PNP_INDEX); + outb(0x07, M1543_PNP_DATA); + + /* Select IRQ12 */ + outb(0x72, M1543_PNP_INDEX); + outb(0x0c, M1543_PNP_DATA); + + outb(0x30, M1543_PNP_INDEX); + printk("device 7, 0x30: %02x\n",inb(M1543_PNP_DATA)); + + outb(0x70, M1543_PNP_INDEX); + printk("device 7, 0x70: %02x\n",inb(M1543_PNP_DATA)); + + /* Leave configration mode */ + outb(0xbb, M1543_PNP_CONFIG); + + +} + +void ddb_local0_irqdispatch(struct pt_regs *regs) +{ + u32 mask; + int nile4_irq; + + mask = nile4_get_irq_stat(0); + + /* Handle the timer interrupt first */ +#if 0 + if (mask & (1 << NILE4_INT_GPT)) { + do_IRQ(nile4_to_irq(NILE4_INT_GPT), regs); + mask &= ~(1 << NILE4_INT_GPT); + } +#endif + for (nile4_irq = 0; mask; nile4_irq++, mask >>= 1) + if (mask & 1) { + if (nile4_irq == NILE4_INT_INTE) { + int i8259_irq; + + nile4_clear_irq(NILE4_INT_INTE); + i8259_irq = nile4_i8259_iack(); + do_IRQ(i8259_irq, regs); + } else + do_IRQ(nile4_to_irq(nile4_irq), regs); + + } +} + +void ddb_local1_irqdispatch(void) +{ + printk("ddb_local1_irqdispatch called\n"); +} + +void ddb_buserror_irq(void) +{ + printk("ddb_buserror_irq called\n"); +} + +void ddb_8254timer_irq(void) +{ + printk("ddb_8254timer_irq called\n"); +} + +void __init arch_init_irq(void) +{ + /* setup cascade interrupts */ + setup_irq(NILE4_IRQ_BASE + NILE4_INT_INTE, &irq_cascade); + setup_irq(CPU_IRQ_BASE + CPU_NILE4_CASCADE, &irq_cascade); + + set_except_vector(0, ddbIRQ); + + nile4_irq_setup(NILE4_IRQ_BASE); + m1543_irq_setup(); + init_i8259_irqs(); + + + printk("CPU_IRQ_BASE: %d\n",CPU_IRQ_BASE); + + mips_cpu_irq_init(CPU_IRQ_BASE); + + printk("enabling 8259 cascade\n"); + + ddb5074_led_hex(0); + + /* Enable the interrupt cascade */ + nile4_enable_irq(NILE4_IRQ_BASE+IRQ_I8259_CASCADE); +} diff --git a/arch/mips/ddb5xxx/ddb5074/nile4_pic.c b/arch/mips/ddb5xxx/ddb5074/nile4_pic.c new file mode 100644 index 00000000000..68c127cd70c --- /dev/null +++ b/arch/mips/ddb5xxx/ddb5074/nile4_pic.c @@ -0,0 +1,287 @@ +/* + * arch/mips/ddb5476/nile4.c -- + * low-level PIC code for NEC Vrc-5476 (Nile 4) + * + * Copyright (C) 2000 Geert Uytterhoeven + * Sony Software Development Center Europe (SDCE), Brussels + * + * Copyright 2001 MontaVista Software Inc. + * Author: jsun@mvista.com or jsun@junsun.net + * + */ +#include +#include +#include +#include +#include + +#include + +#include + +static int irq_base; + +/* + * Interrupt Programming + */ +void nile4_map_irq(int nile4_irq, int cpu_irq) +{ + u32 offset, t; + + offset = DDB_INTCTRL; + if (nile4_irq >= 8) { + offset += 4; + nile4_irq -= 8; + } + t = ddb_in32(offset); + t &= ~(7 << (nile4_irq * 4)); + t |= cpu_irq << (nile4_irq * 4); + ddb_out32(offset, t); +} + +void nile4_map_irq_all(int cpu_irq) +{ + u32 all, t; + + all = cpu_irq; + all |= all << 4; + all |= all << 8; + all |= all << 16; + t = ddb_in32(DDB_INTCTRL); + t &= 0x88888888; + t |= all; + ddb_out32(DDB_INTCTRL, t); + t = ddb_in32(DDB_INTCTRL + 4); + t &= 0x88888888; + t |= all; + ddb_out32(DDB_INTCTRL + 4, t); +} + +void nile4_enable_irq(unsigned int nile4_irq) +{ + u32 offset, t; + + nile4_irq-=irq_base; + + ddb5074_led_hex(8); + + offset = DDB_INTCTRL; + if (nile4_irq >= 8) { + offset += 4; + nile4_irq -= 8; + } + ddb5074_led_hex(9); + t = ddb_in32(offset); + ddb5074_led_hex(0xa); + t |= 8 << (nile4_irq * 4); + ddb_out32(offset, t); + ddb5074_led_hex(0xb); +} + +void nile4_disable_irq(unsigned int nile4_irq) +{ + u32 offset, t; + + nile4_irq-=irq_base; + + offset = DDB_INTCTRL; + if (nile4_irq >= 8) { + offset += 4; + nile4_irq -= 8; + } + t = ddb_in32(offset); + t &= ~(8 << (nile4_irq * 4)); + ddb_out32(offset, t); +} + +void nile4_disable_irq_all(void) +{ + ddb_out32(DDB_INTCTRL, 0); + ddb_out32(DDB_INTCTRL + 4, 0); +} + +u16 nile4_get_irq_stat(int cpu_irq) +{ + return ddb_in16(DDB_INTSTAT0 + cpu_irq * 2); +} + +void nile4_enable_irq_output(int cpu_irq) +{ + u32 t; + + t = ddb_in32(DDB_INTSTAT1 + 4); + t |= 1 << (16 + cpu_irq); + ddb_out32(DDB_INTSTAT1, t); +} + +void nile4_disable_irq_output(int cpu_irq) +{ + u32 t; + + t = ddb_in32(DDB_INTSTAT1 + 4); + t &= ~(1 << (16 + cpu_irq)); + ddb_out32(DDB_INTSTAT1, t); +} + +void nile4_set_pci_irq_polarity(int pci_irq, int high) +{ + u32 t; + + t = ddb_in32(DDB_INTPPES); + if (high) + t &= ~(1 << (pci_irq * 2)); + else + t |= 1 << (pci_irq * 2); + ddb_out32(DDB_INTPPES, t); +} + +void nile4_set_pci_irq_level_or_edge(int pci_irq, int level) +{ + u32 t; + + t = ddb_in32(DDB_INTPPES); + if (level) + t |= 2 << (pci_irq * 2); + else + t &= ~(2 << (pci_irq * 2)); + ddb_out32(DDB_INTPPES, t); +} + +void nile4_clear_irq(int nile4_irq) +{ + nile4_irq-=irq_base; + ddb_out32(DDB_INTCLR, 1 << nile4_irq); +} + +void nile4_clear_irq_mask(u32 mask) +{ + ddb_out32(DDB_INTCLR, mask); +} + +u8 nile4_i8259_iack(void) +{ + u8 irq; + u32 reg; + + /* Set window 0 for interrupt acknowledge */ + reg = ddb_in32(DDB_PCIINIT0); + + ddb_set_pmr(DDB_PCIINIT0, DDB_PCICMD_IACK, 0, DDB_PCI_ACCESS_32); + irq = *(volatile u8 *) KSEG1ADDR(DDB_PCI_IACK_BASE); + /* restore window 0 for PCI I/O space */ + // ddb_set_pmr(DDB_PCIINIT0, DDB_PCICMD_IO, 0, DDB_PCI_ACCESS_32); + ddb_out32(DDB_PCIINIT0, reg); + + /* i8269.c set the base vector to be 0x0 */ + return irq ; +} + +static unsigned int nile4_irq_startup(unsigned int irq) { + + nile4_enable_irq(irq); + return 0; + +} + +static void nile4_ack_irq(unsigned int irq) { + + ddb5074_led_hex(4); + + nile4_clear_irq(irq); + ddb5074_led_hex(2); + nile4_disable_irq(irq); + + ddb5074_led_hex(0); +} + +static void nile4_irq_end(unsigned int irq) { + + ddb5074_led_hex(3); + if(!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) { + ddb5074_led_hex(5); + nile4_enable_irq(irq); + ddb5074_led_hex(7); + } + + ddb5074_led_hex(1); +} + +#define nile4_irq_shutdown nile4_disable_irq + +static hw_irq_controller nile4_irq_controller = { + "nile4", + nile4_irq_startup, + nile4_irq_shutdown, + nile4_enable_irq, + nile4_disable_irq, + nile4_ack_irq, + nile4_irq_end, + NULL +}; + +void nile4_irq_setup(u32 base) { + + int i; + + irq_base=base; + + /* Map all interrupts to CPU int #0 */ + nile4_map_irq_all(0); + + /* PCI INTA#-E# must be level triggered */ + nile4_set_pci_irq_level_or_edge(0, 1); + nile4_set_pci_irq_level_or_edge(1, 1); + nile4_set_pci_irq_level_or_edge(2, 1); + nile4_set_pci_irq_level_or_edge(3, 1); + nile4_set_pci_irq_level_or_edge(4, 1); + + /* PCI INTA#-D# must be active low, INTE# must be active high */ + nile4_set_pci_irq_polarity(0, 0); + nile4_set_pci_irq_polarity(1, 0); + nile4_set_pci_irq_polarity(2, 0); + nile4_set_pci_irq_polarity(3, 0); + nile4_set_pci_irq_polarity(4, 1); + + + for (i = 0; i < 16; i++) { + nile4_clear_irq(i); + nile4_disable_irq(i); + } + + /* Enable CPU int #0 */ + nile4_enable_irq_output(0); + + for (i= base; i< base + NUM_NILE4_INTERRUPTS; i++) { + irq_desc[i].status = IRQ_DISABLED; + irq_desc[i].action = NULL; + irq_desc[i].depth = 1; + irq_desc[i].handler = &nile4_irq_controller; + } +} + +#if defined(CONFIG_RUNTIME_DEBUG) +void nile4_dump_irq_status(void) +{ + printk(KERN_DEBUG " + CPUSTAT = %p:%p\n", (void *) ddb_in32(DDB_CPUSTAT + 4), + (void *) ddb_in32(DDB_CPUSTAT)); + printk(KERN_DEBUG " + INTCTRL = %p:%p\n", (void *) ddb_in32(DDB_INTCTRL + 4), + (void *) ddb_in32(DDB_INTCTRL)); + printk(KERN_DEBUG + "INTSTAT0 = %p:%p\n", + (void *) ddb_in32(DDB_INTSTAT0 + 4), + (void *) ddb_in32(DDB_INTSTAT0)); + printk(KERN_DEBUG + "INTSTAT1 = %p:%p\n", + (void *) ddb_in32(DDB_INTSTAT1 + 4), + (void *) ddb_in32(DDB_INTSTAT1)); + printk(KERN_DEBUG + "INTCLR = %p:%p\n", (void *) ddb_in32(DDB_INTCLR + 4), + (void *) ddb_in32(DDB_INTCLR)); + printk(KERN_DEBUG + "INTPPES = %p:%p\n", (void *) ddb_in32(DDB_INTPPES + 4), + (void *) ddb_in32(DDB_INTPPES)); +} + +#endif diff --git a/arch/mips/ddb5xxx/ddb5074/setup.c b/arch/mips/ddb5xxx/ddb5074/setup.c new file mode 100644 index 00000000000..a73a5978d55 --- /dev/null +++ b/arch/mips/ddb5xxx/ddb5074/setup.c @@ -0,0 +1,235 @@ +/* + * arch/mips/ddb5074/setup.c -- NEC DDB Vrc-5074 setup routines + * + * Copyright (C) 2000 Geert Uytterhoeven + * Sony Software Development Center Europe (SDCE), Brussels + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static void (*back_to_prom) (void) = (void (*)(void)) 0xbfc00000; + +static void ddb_machine_restart(char *command) +{ + u32 t; + + /* PCI cold reset */ + t = nile4_in32(NILE4_PCICTRL + 4); + t |= 0x40000000; + nile4_out32(NILE4_PCICTRL + 4, t); + /* CPU cold reset */ + t = nile4_in32(NILE4_CPUSTAT); + t |= 1; + nile4_out32(NILE4_CPUSTAT, t); + /* Call the PROM */ + back_to_prom(); +} + +static void ddb_machine_halt(void) +{ + printk("DDB Vrc-5074 halted.\n"); + do { + } while (1); +} + +static void ddb_machine_power_off(void) +{ + printk("DDB Vrc-5074 halted. Please turn off the power.\n"); + do { + } while (1); +} + +extern void rtc_ds1386_init(unsigned long base); + +extern void (*board_timer_setup) (struct irqaction * irq); + +static void __init ddb_timer_init(struct irqaction *irq) +{ + /* set the clock to 1 Hz */ + nile4_out32(NILE4_T2CTRL, 1000000); + /* enable the General-Purpose Timer */ + nile4_out32(NILE4_T2CTRL + 4, 0x00000001); + /* reset timer */ + nile4_out32(NILE4_T2CNTR, 0); + /* enable interrupt */ + setup_irq(nile4_to_irq(NILE4_INT_GPT), irq); + nile4_enable_irq(nile4_to_irq(NILE4_INT_GPT)); + change_c0_status(ST0_IM, + IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4); + +} + +static void __init ddb_time_init(void) +{ + /* we have ds1396 RTC chip */ + rtc_ds1386_init(KSEG1ADDR(DDB_PCI_MEM_BASE)); +} + + + +static void __init ddb5074_setup(void) +{ + set_io_port_base(NILE4_PCI_IO_BASE); + isa_slot_offset = NILE4_PCI_MEM_BASE; + board_timer_setup = ddb_timer_init; + board_time_init = ddb_time_init; + + + _machine_restart = ddb_machine_restart; + _machine_halt = ddb_machine_halt; + _machine_power_off = ddb_machine_power_off; + + ddb_out32(DDB_BAR0, 0); + + ddb_set_pmr(DDB_PCIINIT0, DDB_PCICMD_IO, 0, 0x10); + ddb_set_pmr(DDB_PCIINIT1, DDB_PCICMD_MEM, DDB_PCI_MEM_BASE , 0x10); + + /* Reboot on panic */ + panic_timeout = 180; +} + +early_initcall(ddb5074_setup); + +#define USE_NILE4_SERIAL 0 + +#if USE_NILE4_SERIAL +#define ns16550_in(reg) nile4_in8((reg)*8) +#define ns16550_out(reg, val) nile4_out8((reg)*8, (val)) +#else +#define NS16550_BASE (NILE4_PCI_IO_BASE+0x03f8) +static inline u8 ns16550_in(u32 reg) +{ + return *(volatile u8 *) (NS16550_BASE + reg); +} + +static inline void ns16550_out(u32 reg, u8 val) +{ + *(volatile u8 *) (NS16550_BASE + reg) = val; +} +#endif + +#define NS16550_RBR 0 +#define NS16550_THR 0 +#define NS16550_DLL 0 +#define NS16550_IER 1 +#define NS16550_DLM 1 +#define NS16550_FCR 2 +#define NS16550_IIR 2 +#define NS16550_LCR 3 +#define NS16550_MCR 4 +#define NS16550_LSR 5 +#define NS16550_MSR 6 +#define NS16550_SCR 7 + +#define NS16550_LSR_DR 0x01 /* Data ready */ +#define NS16550_LSR_OE 0x02 /* Overrun */ +#define NS16550_LSR_PE 0x04 /* Parity error */ +#define NS16550_LSR_FE 0x08 /* Framing error */ +#define NS16550_LSR_BI 0x10 /* Break */ +#define NS16550_LSR_THRE 0x20 /* Xmit holding register empty */ +#define NS16550_LSR_TEMT 0x40 /* Xmitter empty */ +#define NS16550_LSR_ERR 0x80 /* Error */ + + +void _serinit(void) +{ +#if USE_NILE4_SERIAL + ns16550_out(NS16550_LCR, 0x80); + ns16550_out(NS16550_DLM, 0x00); + ns16550_out(NS16550_DLL, 0x36); /* 9600 baud */ + ns16550_out(NS16550_LCR, 0x00); + ns16550_out(NS16550_LCR, 0x03); + ns16550_out(NS16550_FCR, 0x47); +#else + /* done by PMON */ +#endif +} + +void _putc(char c) +{ + while (!(ns16550_in(NS16550_LSR) & NS16550_LSR_THRE)); + ns16550_out(NS16550_THR, c); + if (c == '\n') { + while (!(ns16550_in(NS16550_LSR) & NS16550_LSR_THRE)); + ns16550_out(NS16550_THR, '\r'); + } +} + +void _puts(const char *s) +{ + char c; + while ((c = *s++)) + _putc(c); +} + +char _getc(void) +{ + while (!(ns16550_in(NS16550_LSR) & NS16550_LSR_DR)); + return ns16550_in(NS16550_RBR); +} + +int _testc(void) +{ + return (ns16550_in(NS16550_LSR) & NS16550_LSR_DR) != 0; +} + + +/* + * Hexadecimal 7-segment LED + */ +void ddb5074_led_hex(int hex) +{ + outb(hex, 0x80); +} + + +/* + * LEDs D2 and D3, connected to the GPIO pins of the PMU in the ALi M1543 + */ +struct pci_dev *pci_pmu = NULL; + +void ddb5074_led_d2(int on) +{ + u8 t; + + if (pci_pmu) { + pci_read_config_byte(pci_pmu, 0x7e, &t); + if (on) + t &= 0x7f; + else + t |= 0x80; + pci_write_config_byte(pci_pmu, 0x7e, t); + } +} + +void ddb5074_led_d3(int on) +{ + u8 t; + + if (pci_pmu) { + pci_read_config_byte(pci_pmu, 0x7e, &t); + if (on) + t &= 0xbf; + else + t |= 0x40; + pci_write_config_byte(pci_pmu, 0x7e, t); + } +} -- cgit v1.2.3