From b2ba34f370a66d9ed4bbd440e45296ecf3e267d3 Mon Sep 17 00:00:00 2001 From: David Gibson Date: Wed, 13 Jun 2007 14:52:59 +1000 Subject: [POWERPC] Derive ebc ranges property from EBC registers In the device tree for Ebony, the 'ranges' property in the node for the EBC bridge shows the mappings from the chip select / address lines actually used for the EBC peripherals into the address space of the OPB. At present, these mappings are hardcoded in ebony.dts for the mappings set up by the OpenBIOS firmware when it configures the EBC bridge. This replaces the hardcoded mappings with code in the zImage to read the EBC configuration registers and create an appropriate ranges property based on them. This should make the zImage and kernel more robust to changes in firmware configuration. In particular, some of the Ebony's DIP switches can change the effective address of the Flash and other peripherals in OPB space. With this patch, the kernel will be able to cope with at least some of the possible variations. Signed-off-by: David Gibson Signed-off-by: Paul Mackerras --- arch/powerpc/boot/dts/ebony.dts | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'arch/powerpc/boot/dts') diff --git a/arch/powerpc/boot/dts/ebony.dts b/arch/powerpc/boot/dts/ebony.dts index 0ec02f4726b..586a2fc13c6 100644 --- a/arch/powerpc/boot/dts/ebony.dts +++ b/arch/powerpc/boot/dts/ebony.dts @@ -135,11 +135,9 @@ #address-cells = <2>; #size-cells = <1>; clock-frequency = <0>; // Filled in by zImage - ranges = <0 00000000 fff00000 100000 - 1 00000000 48000000 100000 - 2 00000000 ff800000 400000 - 3 00000000 48200000 100000 - 7 00000000 48300000 100000>; + // ranges property is supplied by zImage + // based on firmware's configuration of the + // EBC bridge interrupts = <5 4>; interrupt-parent = <&UIC1>; -- cgit v1.2.3 From e60c526fba3ba77070d0c97fac52c86243ad694d Mon Sep 17 00:00:00 2001 From: David Gibson Date: Wed, 13 Jun 2007 14:53:00 +1000 Subject: [POWERPC] Don't store a command line in the Holly device tree Currently, the Holly device tree includes a bootargs property in /chosen, which gives a commandline. This is somewhat inconvenient, because it means an alternative default command line can't be given in the kernel config - the value obtained from the dts via the bootwrapper will always override CONFIG_CMDLINE. This removes the command line from the dts, and instead puts the same command line as a default in holly_defconfig. Signed-off-by: David Gibson Signed-off-by: Paul Mackerras --- arch/powerpc/boot/dts/holly.dts | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/powerpc/boot/dts') diff --git a/arch/powerpc/boot/dts/holly.dts b/arch/powerpc/boot/dts/holly.dts index 254499b107f..e6b5091de9c 100644 --- a/arch/powerpc/boot/dts/holly.dts +++ b/arch/powerpc/boot/dts/holly.dts @@ -193,6 +193,5 @@ chosen { linux,stdout-path = "/tsi109@c0000000/serial@7808"; - bootargs = "console=ttyS0,115200"; }; }; -- cgit v1.2.3 From e58ca3de64927e96beb2f1594975dc4a29b79459 Mon Sep 17 00:00:00 2001 From: David Gibson Date: Wed, 13 Jun 2007 14:53:00 +1000 Subject: [POWERPC] Fix problems with device tree representation of TSI-1xx bridges This fixes some problems with the way the some things represented in the device tree for the Holly and Taiga boards. This means changes both to the dts files, and to the code which instantiates the tsi108 ethernet platform devices based on the device tree. - First, and most importantly, the ethernet PHYs are given with an identical 'reg' property. This reg currently encodes the accessible register used to initiate mdio interaction with the PHYs, rather than a meaningful address on the parent bus (mdio in this case), which is incorrect. Instead we give the address of these registers as 'reg' in the mdio node itself, and encode the ID of each phy in their 'reg' propertyies. - Currently the platform device constructor enables a workaround in the tsi108 ethernet driver based on the compatible property of the PHY. This is incorrect, because the workaround in question is necessary due to the board's wiring of the PHY, not the model of PHY itself. This patch alters the constructor to instead enable the workaround based on a new special property in the PHY node. - The compatible properties on a number of nodes in the device tree are insufficiently precise. In particular the PHYs give only "bcm54xx", which is broken, since there are many bcm54xx PHY models, and they have differences which matter. The mdio had a compatible property of "tsi-ethernet" identical to the ethernet MAC nodes, which doesn't make sense. The ethernet, i2c, bridge and PCI nodes were given only as "tsi-*" which is somewhat inprecise, we replace with "tsi108-*" in the case of Taiga (which has a TSI108 bridge), and "tsi109-*", "tsi108-*" in the case of Holly (which has a TSI109 bridge). - We remove some "model" properties from the ethernets on Taiga board which were neither useful nor adequately precise. - On Holly we change to using a dtc label instead of a full path to reference the MPIC node, which makes the dts a little more readable. Signed-off-by: David Gibson Signed-off-by: Paul Mackerras --- arch/powerpc/boot/dts/holly.dts | 51 ++++++++++++++++++----------------- arch/powerpc/boot/dts/mpc7448hpc2.dts | 33 +++++++++++------------ 2 files changed, 43 insertions(+), 41 deletions(-) (limited to 'arch/powerpc/boot/dts') diff --git a/arch/powerpc/boot/dts/holly.dts b/arch/powerpc/boot/dts/holly.dts index e6b5091de9c..80a4fab8ee3 100644 --- a/arch/powerpc/boot/dts/holly.dts +++ b/arch/powerpc/boot/dts/holly.dts @@ -46,7 +46,7 @@ tsi109@c0000000 { device_type = "tsi-bridge"; - compatible = "tsi-bridge"; + compatible = "tsi109-bridge", "tsi108-bridge"; #address-cells = <1>; #size-cells = <1>; ranges = <00000000 c0000000 00010000>; @@ -54,52 +54,55 @@ i2c@7000 { device_type = "i2c"; - compatible = "tsi-i2c"; - interrupt-parent = < &/tsi109@c0000000/pic@7400 >; + compatible = "tsi109-i2c", "tsi108-i2c"; + interrupt-parent = <&MPIC>; interrupts = ; reg = <7000 400>; }; - mdio@6000 { + MDIO: mdio@6000 { device_type = "mdio"; - compatible = "tsi-ethernet"; + compatible = "tsi109-mdio", "tsi108-mdio"; + reg = <6000 50>; + #address-cells = <1>; + #size-cells = <0>; - PHY1: ethernet-phy@6000 { - device_type = "ethernet-phy"; - compatible = "bcm54xx"; - reg = <6000 50>; - phy-id = <1>; + PHY1: ethernet-phy@1 { + compatible = "bcm5461a"; + reg = <1>; + txc-rxc-delay-disable; }; - PHY2: ethernet-phy@6400 { - device_type = "ethernet-phy"; - compatible = "bcm54xx"; - reg = <6000 50>; - phy-id = <2>; + PHY2: ethernet-phy@2 { + compatible = "bcm5461a"; + reg = <2>; + txc-rxc-delay-disable; }; }; ethernet@6200 { device_type = "network"; - compatible = "tsi-ethernet"; + compatible = "tsi109-ethernet", "tsi108-ethernet"; #address-cells = <1>; #size-cells = <0>; reg = <6000 200>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupt-parent = < &/tsi109@c0000000/pic@7400 >; + interrupt-parent = <&MPIC>; interrupts = <10 2>; + mdio-handle = <&MDIO>; phy-handle = <&PHY1>; }; ethernet@6600 { device_type = "network"; - compatible = "tsi-ethernet"; + compatible = "tsi109-ethernet", "tsi108-ethernet"; #address-cells = <1>; #size-cells = <0>; reg = <6400 200>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupt-parent = < &/tsi109@c0000000/pic@7400 >; + interrupt-parent = <&MPIC>; interrupts = <11 2>; + mdio-handle = <&MDIO>; phy-handle = <&PHY2>; }; @@ -110,7 +113,7 @@ virtual-reg = ; clock-frequency = <3F9C6000>; current-speed = <1c200>; - interrupt-parent = < &/tsi109@c0000000/pic@7400 >; + interrupt-parent = <&MPIC>; interrupts = ; }; @@ -121,7 +124,7 @@ virtual-reg = ; clock-frequency = <3F9C6000>; current-speed = <1c200>; - interrupt-parent = < &/tsi109@c0000000/pic@7400 >; + interrupt-parent = <&MPIC>; interrupts = ; }; @@ -136,7 +139,7 @@ pci@1000 { device_type = "pci"; - compatible = "tsi109"; + compatible = "tsi109-pci", "tsi108-pci"; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; @@ -150,7 +153,7 @@ ranges = <02000000 0 40000000 40000000 0 10000000 01000000 0 00000000 7e000000 0 00010000>; clock-frequency = <7f28154>; - interrupt-parent = < &/tsi109@c0000000/pic@7400 >; + interrupt-parent = <&MPIC>; interrupts = <17 2>; interrupt-map-mask = ; /*----------------------------------------------------+ @@ -186,7 +189,7 @@ #address-cells = <0>; #interrupt-cells = <2>; interrupts = <17 2>; - interrupt-parent = < &/tsi109@c0000000/pic@7400 >; + interrupt-parent = <&MPIC>; }; }; }; diff --git a/arch/powerpc/boot/dts/mpc7448hpc2.dts b/arch/powerpc/boot/dts/mpc7448hpc2.dts index 765c306ecf8..0e3d314a715 100644 --- a/arch/powerpc/boot/dts/mpc7448hpc2.dts +++ b/arch/powerpc/boot/dts/mpc7448hpc2.dts @@ -45,7 +45,7 @@ #address-cells = <1>; #size-cells = <1>; #interrupt-cells = <2>; - device_type = "tsi-bridge"; + device_type = "tsi108-bridge"; ranges = <00000000 c0000000 00010000>; reg = ; bus-frequency = <0>; @@ -55,27 +55,26 @@ interrupts = ; reg = <7000 400>; device_type = "i2c"; - compatible = "tsi-i2c"; + compatible = "tsi108-i2c"; }; - mdio@6000 { + MDIO: mdio@6000 { device_type = "mdio"; - compatible = "tsi-ethernet"; + compatible = "tsi108-mdio"; + reg = <6000 50>; + #address-cells = <1>; + #size-cells = <0>; - phy8: ethernet-phy@6000 { + phy8: ethernet-phy@8 { interrupt-parent = <&mpic>; interrupts = <2 1>; - reg = <6000 50>; - phy-id = <8>; - device_type = "ethernet-phy"; + reg = <8>; }; - phy9: ethernet-phy@6400 { + phy9: ethernet-phy@9 { interrupt-parent = <&mpic>; interrupts = <2 1>; - reg = <6000 50>; - phy-id = <9>; - device_type = "ethernet-phy"; + reg = <9>; }; }; @@ -83,12 +82,12 @@ ethernet@6200 { #size-cells = <0>; device_type = "network"; - model = "TSI-ETH"; - compatible = "tsi-ethernet"; + compatible = "tsi108-ethernet"; reg = <6000 200>; address = [ 00 06 D2 00 00 01 ]; interrupts = <10 2>; interrupt-parent = <&mpic>; + mdio-handle = <&MDIO>; phy-handle = <&phy8>; }; @@ -96,12 +95,12 @@ #address-cells = <1>; #size-cells = <0>; device_type = "network"; - model = "TSI-ETH"; - compatible = "tsi-ethernet"; + compatible = "tsi108-ethernet"; reg = <6400 200>; address = [ 00 06 D2 00 00 02 ]; interrupts = <11 2>; interrupt-parent = <&mpic>; + mdio-handle = <&MDIO>; phy-handle = <&phy9>; }; @@ -135,7 +134,7 @@ big-endian; }; pci@1000 { - compatible = "tsi10x"; + compatible = "tsi108-pci"; device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; -- cgit v1.2.3 From bb807e69c9eec271808cf69d19913d7ee1a51f6f Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Thu, 7 Jun 2007 10:42:28 +1000 Subject: [POWERPC] Remove 'console=' from cmdline on prpmc2800 Specifying 'console=ttyMM0' on the cmdline for the prmpc2800 is no longer necessary. Signed-off-by: Mark A. Greer Signed-off-by: Paul Mackerras --- arch/powerpc/boot/dts/prpmc2800.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc/boot/dts') diff --git a/arch/powerpc/boot/dts/prpmc2800.dts b/arch/powerpc/boot/dts/prpmc2800.dts index 568965a022b..699d0df574d 100644 --- a/arch/powerpc/boot/dts/prpmc2800.dts +++ b/arch/powerpc/boot/dts/prpmc2800.dts @@ -309,7 +309,7 @@ }; chosen { - bootargs = "ip=on console=ttyMM0"; + bootargs = "ip=on"; linux,stdout-path = "/mv64x60@f1000000/mpsc@8000"; }; }; -- cgit v1.2.3 From 9065762edf5ac90e312af1f81e03dc2c964d5a86 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Sat, 16 Jun 2007 08:06:51 +1000 Subject: [POWERPC] PS3: Device tree source The PS3 device tree source. Signed-off-by: Geoff Levand Acked-by: Segher Boessenkool Signed-off-by: Paul Mackerras --- arch/powerpc/boot/dts/ps3.dts | 68 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 68 insertions(+) create mode 100644 arch/powerpc/boot/dts/ps3.dts (limited to 'arch/powerpc/boot/dts') diff --git a/arch/powerpc/boot/dts/ps3.dts b/arch/powerpc/boot/dts/ps3.dts new file mode 100644 index 00000000000..379ded282d5 --- /dev/null +++ b/arch/powerpc/boot/dts/ps3.dts @@ -0,0 +1,68 @@ +/* + * PS3 Game Console device tree. + * + * Copyright (C) 2007 Sony Computer Entertainment Inc. + * Copyright 2007 Sony Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/ { + model = "SonyPS3"; + compatible = "sony,ps3"; + #size-cells = <2>; + #address-cells = <2>; + + chosen { + }; + + /* + * We'll get the size of the bootmem block from lv1 after startup, + * so we'll put a null entry here. + */ + + memory { + device_type = "memory"; + reg = <0 0 0 0>; + }; + + /* + * The boot cpu is always zero for PS3. + * + * dtc expects a clock-frequency and timebase-frequency entries, so + * we'll put a null entries here. These will be initialized after + * startup with data from lv1. + * + * Seems the only way currently to indicate a processor has multiple + * threads is with an ibm,ppc-interrupt-server#s entry. We'll put one + * here so we can bring up both of ours. See smp_setup_cpu_maps(). + */ + + cpus { + #size-cells = <0>; + #address-cells = <1>; + + cpu@0 { + device_type = "cpu"; + reg = <0>; + ibm,ppc-interrupt-server#s = <0 1>; + clock-frequency = <0>; + timebase-frequency = <0>; + i-cache-size = <8000>; + d-cache-size = <8000>; + i-cache-line-size = <80>; + d-cache-line-size = <80>; + }; + }; +}; -- cgit v1.2.3 From bf7c036fb48a6176635f2e7b749d7398728d4b7d Mon Sep 17 00:00:00 2001 From: Zhang Wei Date: Tue, 22 May 2007 11:38:26 +0800 Subject: [POWERPC] Remove PCI-e errata for MPC8641 silicon ver 1.0 Remove errata for PCI-e support of Rev 1.0 of MPC8641 since its considered obselete and is not production level silicon from Freescale. Signed-off-by: Zhang Wei Acked-by: Roy Zang Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8641_hpcn.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc/boot/dts') diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts index 260b264c869..748f7b90f5d 100644 --- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts @@ -186,7 +186,7 @@ #size-cells = <2>; #address-cells = <3>; reg = <8000 1000>; - bus-range = <0 fe>; + bus-range = <0 ff>; ranges = <02000000 0 80000000 80000000 0 20000000 01000000 0 00000000 e2000000 0 00100000>; clock-frequency = <1fca055>; -- cgit v1.2.3 From dfac6faf8f42d5a9dd6919d7a2a41ef91eb77b4f Mon Sep 17 00:00:00 2001 From: Wade Farnsworth Date: Mon, 4 Jun 2007 13:24:47 -0700 Subject: [POWERPC] 86xx: Add uli1575 pci-bridge sector to MPC8641HPCN dts file. This adds device nodes for the PCI bridges as well as the ISA devices on the newer revision MPC8641HPCN. It also adds the PCI ranges to the soc node so that address translation for the ISA devices works properly. Signed-off-by: Wade Farnsworth Signed-off-by: Jon Loeliger Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8641_hpcn.dts | 97 +++++++++++++++++++++++++++++----- 1 file changed, 84 insertions(+), 13 deletions(-) (limited to 'arch/powerpc/boot/dts') diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts index 748f7b90f5d..393cfdf92ff 100644 --- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts @@ -56,8 +56,12 @@ #size-cells = <1>; #interrupt-cells = <2>; device_type = "soc"; - ranges = <0 f8000000 00100000>; - reg = ; // CCSRBAR 1M + ranges = <00001000 f8001000 000ff000 + 80000000 80000000 20000000 + e2000000 e2000000 00100000 + a0000000 a0000000 20000000 + e3000000 e3000000 00100000>; + reg = ; // CCSRBAR bus-frequency = <0>; i2c@3000 { @@ -285,17 +289,84 @@ f800 0 0 3 &i8259 0 0 f800 0 0 4 &i8259 0 0 >; - i8259: i8259@4d0 { - clock-frequency = <0>; - interrupt-controller; - device_type = "interrupt-controller"; - #address-cells = <0>; - #interrupt-cells = <2>; - built-in; - compatible = "chrp,iic"; - big-endian; - interrupts = <49 2>; - interrupt-parent = <&mpic>; + uli1575@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + ranges = <02000000 0 80000000 + 02000000 0 80000000 + 0 20000000 + 01000000 0 00000000 + 01000000 0 00000000 + 0 00100000>; + + pci_bridge@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + ranges = <02000000 0 80000000 + 02000000 0 80000000 + 0 20000000 + 01000000 0 00000000 + 01000000 0 00000000 + 0 00100000>; + + isa@1e { + device_type = "isa"; + #interrupt-cells = <2>; + #size-cells = <1>; + #address-cells = <2>; + reg = ; + ranges = <1 0 01000000 0 0 + 00001000>; + interrupt-parent = <&i8259>; + + i8259: interrupt-controller@20 { + reg = <1 20 2 + 1 a0 2 + 1 4d0 2>; + clock-frequency = <0>; + interrupt-controller; + device_type = "interrupt-controller"; + #address-cells = <0>; + #interrupt-cells = <2>; + built-in; + compatible = "chrp,iic"; + interrupts = <49 2>; + interrupt-parent = + <&mpic>; + }; + + i8042@60 { + #size-cells = <0>; + #address-cells = <1>; + reg = <1 60 1 1 64 1>; + interrupts = <1 3 c 3>; + interrupt-parent = + <&i8259>; + + keyboard@0 { + reg = <0>; + compatible = "pnpPNP,303"; + }; + + mouse@1 { + reg = <1>; + compatible = "pnpPNP,f03"; + }; + }; + + rtc@70 { + compatible = + "pnpPNP,b00"; + reg = <1 70 2>; + }; + + gpio@400 { + reg = <1 400 80>; + }; + }; + }; }; }; -- cgit v1.2.3 From 68fb0d203f4f62c8d1ac24d8ef2473582d8ea9db Mon Sep 17 00:00:00 2001 From: Roy Zang Date: Wed, 13 Jun 2007 17:13:42 +0800 Subject: [POWERPC] 85xx: Fix 8548CDS reset bug Begin with MPC8548 a new reset control register is added that asserts HRESET_REQ to board logic. This register is used for chip reset. Signed-off-by: Roy Zang Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8548cds.dts | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/powerpc/boot/dts') diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts index ad96381033c..0550a3c391a 100644 --- a/arch/powerpc/boot/dts/mpc8548cds.dts +++ b/arch/powerpc/boot/dts/mpc8548cds.dts @@ -177,6 +177,12 @@ interrupt-parent = <&mpic>; }; + global-utilities@e0000 { //global utilities reg + compatible = "fsl,mpc8548-guts"; + reg = ; + fsl,has-rstcr; + }; + pci1: pci@8000 { interrupt-map-mask = <1f800 0 0 7>; interrupt-map = < -- cgit v1.2.3 From eae98266e78e5659d75dbb62b4601960c15c7830 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Fri, 22 Jun 2007 14:33:15 -0500 Subject: [POWERPC] Fix MAC address entries for 83xx, 85xx, and 86xx device trees For the 83xx, 85xx, and 86xx device trees, add a "local-mac-address" property to every Ethernet node that didn't have one. Add a comment indicating that the "address" and/or "mac-address" properties are deprecated in DTS files and will be removed at a later time. Change all MAC address properties to have a zero MAC address value. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc832x_mds.dts | 16 ++++++++++++++-- arch/powerpc/boot/dts/mpc832x_rdb.dts | 16 ++++++++++++++-- arch/powerpc/boot/dts/mpc8349emitx.dts | 10 ++++++++++ arch/powerpc/boot/dts/mpc834x_mds.dts | 10 ++++++++++ arch/powerpc/boot/dts/mpc836x_mds.dts | 16 ++++++++++++++-- arch/powerpc/boot/dts/mpc8540ads.dts | 27 +++++++++++++++++++++------ arch/powerpc/boot/dts/mpc8541cds.dts | 4 ++-- arch/powerpc/boot/dts/mpc8548cds.dts | 8 ++++---- arch/powerpc/boot/dts/mpc8555cds.dts | 4 ++-- arch/powerpc/boot/dts/mpc8560ads.dts | 32 ++++++++++++++++++++++++++++---- arch/powerpc/boot/dts/mpc8568mds.dts | 30 +++++++++++++++++++++++++++--- arch/powerpc/boot/dts/mpc8641_hpcn.dts | 32 ++++++++++++++++++++++++++++---- 12 files changed, 174 insertions(+), 31 deletions(-) (limited to 'arch/powerpc/boot/dts') diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts index 112dd5198fe..4fc0c4d34aa 100644 --- a/arch/powerpc/boot/dts/mpc832x_mds.dts +++ b/arch/powerpc/boot/dts/mpc832x_mds.dts @@ -272,7 +272,13 @@ reg = <2200 200>; interrupts = <22>; interrupt-parent = < &qeic >; - mac-address = [ 00 04 9f 00 23 23 ]; + /* + * mac-address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ + mac-address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock = <19>; tx-clock = <1a>; phy-handle = < &phy3 >; @@ -287,7 +293,13 @@ reg = <3000 200>; interrupts = <23>; interrupt-parent = < &qeic >; - mac-address = [ 00 11 22 33 44 55 ]; + /* + * mac-address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ + mac-address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock = <17>; tx-clock = <18>; phy-handle = < &phy4 >; diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts index be4c35784e4..447c03ffabb 100644 --- a/arch/powerpc/boot/dts/mpc832x_rdb.dts +++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts @@ -231,7 +231,13 @@ reg = <3000 200>; interrupts = <21>; interrupt-parent = <&qeic>; - mac-address = [ 00 04 9f ef 03 02 ]; + /* + * mac-address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ + mac-address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock = <20>; tx-clock = <13>; phy-handle = <&phy00>; @@ -246,7 +252,13 @@ reg = <2200 200>; interrupts = <22>; interrupt-parent = <&qeic>; - mac-address = [ 00 04 9f ef 03 01 ]; + /* + * mac-address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ + mac-address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock = <19>; tx-clock = <1a>; phy-handle = <&phy04>; diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index db0d0030327..ae9bca57545 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -131,6 +131,11 @@ model = "TSEC"; compatible = "gianfar"; reg = <24000 1000>; + /* + * address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <20 8 21 8 22 8>; @@ -145,6 +150,11 @@ model = "TSEC"; compatible = "gianfar"; reg = <25000 1000>; + /* + * address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <23 8 24 8 25 8>; diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts index df773fafe9d..310e877826b 100644 --- a/arch/powerpc/boot/dts/mpc834x_mds.dts +++ b/arch/powerpc/boot/dts/mpc834x_mds.dts @@ -136,6 +136,11 @@ model = "TSEC"; compatible = "gianfar"; reg = <24000 1000>; + /* + * address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <20 8 21 8 22 8>; @@ -150,6 +155,11 @@ model = "TSEC"; compatible = "gianfar"; reg = <25000 1000>; + /* + * address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <23 8 24 8 25 8>; diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts index 38c8594df3a..1e914f31dd9 100644 --- a/arch/powerpc/boot/dts/mpc836x_mds.dts +++ b/arch/powerpc/boot/dts/mpc836x_mds.dts @@ -301,7 +301,13 @@ reg = <2000 200>; interrupts = <20>; interrupt-parent = < &qeic >; - mac-address = [ 00 04 9f 00 23 23 ]; + /* + * mac-address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ + mac-address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock = <0>; tx-clock = <19>; phy-handle = < &phy0 >; @@ -317,7 +323,13 @@ reg = <3000 200>; interrupts = <21>; interrupt-parent = < &qeic >; - mac-address = [ 00 11 22 33 44 55 ]; + /* + * mac-address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ + mac-address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock = <0>; tx-clock = <14>; phy-handle = < &phy1 >; diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts index d91e81c009f..78828b239d0 100644 --- a/arch/powerpc/boot/dts/mpc8540ads.dts +++ b/arch/powerpc/boot/dts/mpc8540ads.dts @@ -106,8 +106,13 @@ model = "TSEC"; compatible = "gianfar"; reg = <24000 1000>; - address = [ 00 E0 0C 00 73 00 ]; - local-mac-address = [ 00 E0 0C 00 73 00 ]; + /* + * address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ + address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = ; interrupt-parent = <&mpic>; phy-handle = <&phy0>; @@ -120,8 +125,13 @@ model = "TSEC"; compatible = "gianfar"; reg = <25000 1000>; - address = [ 00 E0 0C 00 73 01 ]; - local-mac-address = [ 00 E0 0C 00 73 01 ]; + /* + * address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ + address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <13 2 14 2 18 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; @@ -134,8 +144,13 @@ model = "FEC"; compatible = "gianfar"; reg = <26000 1000>; - address = [ 00 E0 0C 00 73 02 ]; - local-mac-address = [ 00 E0 0C 00 73 02 ]; + /* + * address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ + address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <19 2>; interrupt-parent = <&mpic>; phy-handle = <&phy3>; diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts index 4f2c3af2e05..2a0afbcebe3 100644 --- a/arch/powerpc/boot/dts/mpc8541cds.dts +++ b/arch/powerpc/boot/dts/mpc8541cds.dts @@ -100,7 +100,7 @@ model = "TSEC"; compatible = "gianfar"; reg = <24000 1000>; - local-mac-address = [ 00 E0 0C 00 73 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = ; interrupt-parent = <&mpic>; phy-handle = <&phy0>; @@ -113,7 +113,7 @@ model = "TSEC"; compatible = "gianfar"; reg = <25000 1000>; - local-mac-address = [ 00 E0 0C 00 73 01 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <13 2 14 2 18 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts index 0550a3c391a..ea9b1266263 100644 --- a/arch/powerpc/boot/dts/mpc8548cds.dts +++ b/arch/powerpc/boot/dts/mpc8548cds.dts @@ -112,7 +112,7 @@ model = "eTSEC"; compatible = "gianfar"; reg = <24000 1000>; - local-mac-address = [ 00 E0 0C 00 73 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = ; interrupt-parent = <&mpic>; phy-handle = <&phy0>; @@ -125,7 +125,7 @@ model = "eTSEC"; compatible = "gianfar"; reg = <25000 1000>; - local-mac-address = [ 00 E0 0C 00 73 01 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <13 2 14 2 18 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; @@ -139,7 +139,7 @@ model = "eTSEC"; compatible = "gianfar"; reg = <26000 1000>; - local-mac-address = [ 00 E0 0C 00 73 02 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = ; interrupt-parent = <&mpic>; phy-handle = <&phy2>; @@ -152,7 +152,7 @@ model = "eTSEC"; compatible = "gianfar"; reg = <27000 1000>; - local-mac-address = [ 00 E0 0C 00 73 03 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <15 2 16 2 17 2>; interrupt-parent = <&mpic>; phy-handle = <&phy3>; diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts index 951ed92f115..c41ee616603 100644 --- a/arch/powerpc/boot/dts/mpc8555cds.dts +++ b/arch/powerpc/boot/dts/mpc8555cds.dts @@ -100,7 +100,7 @@ model = "TSEC"; compatible = "gianfar"; reg = <24000 1000>; - local-mac-address = [ 00 E0 0C 00 73 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <0d 2 0e 2 12 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; @@ -113,7 +113,7 @@ model = "TSEC"; compatible = "gianfar"; reg = <25000 1000>; - local-mac-address = [ 00 E0 0C 00 73 01 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <13 2 14 2 18 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts index 80682152b0c..205ee3219ec 100644 --- a/arch/powerpc/boot/dts/mpc8560ads.dts +++ b/arch/powerpc/boot/dts/mpc8560ads.dts @@ -101,7 +101,13 @@ model = "TSEC"; compatible = "gianfar"; reg = <24000 1000>; - address = [ 00 00 0C 00 00 FD ]; + /* + * address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ + address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = ; interrupt-parent = <&mpic>; phy-handle = <&phy0>; @@ -114,7 +120,13 @@ model = "TSEC"; compatible = "gianfar"; reg = <25000 1000>; - address = [ 00 00 0C 00 01 FD ]; + /* + * address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ + address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <13 2 14 2 18 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; @@ -275,7 +287,13 @@ model = "FCC"; device-id = <2>; reg = <91320 20 88500 100 913a0 30>; - mac-address = [ 00 00 0C 00 02 FD ]; + /* + * mac-address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ + mac-address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; clock-setup = ; rx-clock = <15>; tx-clock = <16>; @@ -290,7 +308,13 @@ model = "FCC"; device-id = <3>; reg = <91340 20 88600 100 913d0 30>; - mac-address = [ 00 00 0C 00 03 FD ]; + /* + * mac-address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ + mac-address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; clock-setup = ; rx-clock = <17>; tx-clock = <18>; diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts index a123ec9456b..479a7a55ede 100644 --- a/arch/powerpc/boot/dts/mpc8568mds.dts +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -130,7 +130,13 @@ model = "eTSEC"; compatible = "gianfar"; reg = <24000 1000>; + /* + * mac-address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ mac-address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = ; interrupt-parent = <&mpic>; phy-handle = <&phy2>; @@ -143,7 +149,13 @@ model = "eTSEC"; compatible = "gianfar"; reg = <25000 1000>; - mac-address = [ 00 00 00 00 00 00]; + /* + * mac-address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ + mac-address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <13 2 14 2 18 2>; interrupt-parent = <&mpic>; phy-handle = <&phy3>; @@ -300,7 +312,13 @@ reg = <2000 200>; interrupts = <20>; interrupt-parent = <&qeic>; - mac-address = [ 00 04 9f 00 23 23 ]; + /* + * mac-address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ + mac-address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock = <0>; tx-clock = <19>; phy-handle = <&qe_phy0>; @@ -316,7 +334,13 @@ reg = <3000 200>; interrupts = <21>; interrupt-parent = <&qeic>; - mac-address = [ 00 11 22 33 44 55 ]; + /* + * mac-address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ + mac-address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock = <0>; tx-clock = <14>; phy-handle = <&qe_phy1>; diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts index 393cfdf92ff..4b8ac7231ac 100644 --- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts @@ -121,7 +121,13 @@ model = "TSEC"; compatible = "gianfar"; reg = <24000 1000>; - mac-address = [ 00 E0 0C 00 73 00 ]; + /* + * mac-address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ + mac-address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <1d 2 1e 2 22 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; @@ -134,7 +140,13 @@ model = "TSEC"; compatible = "gianfar"; reg = <25000 1000>; - mac-address = [ 00 E0 0C 00 73 01 ]; + /* + * mac-address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ + mac-address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <23 2 24 2 28 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; @@ -147,7 +159,13 @@ model = "TSEC"; compatible = "gianfar"; reg = <26000 1000>; - mac-address = [ 00 E0 0C 00 02 FD ]; + /* + * mac-address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ + mac-address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <1F 2 20 2 21 2>; interrupt-parent = <&mpic>; phy-handle = <&phy2>; @@ -160,7 +178,13 @@ model = "TSEC"; compatible = "gianfar"; reg = <27000 1000>; - mac-address = [ 00 E0 0C 00 03 FD ]; + /* + * mac-address is deprecated and will be removed + * in 2.6.25. Only recent versions of + * U-Boot support local-mac-address, however. + */ + mac-address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <25 2 26 2 27 2>; interrupt-parent = <&mpic>; phy-handle = <&phy3>; -- cgit v1.2.3 From b533f8ae796d1ee0289bf04d4f1e72c02ad4a17d Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 3 Jul 2007 02:35:35 -0500 Subject: [POWERPC] Reworked interrupt numbers for OpenPIC based Freescale chips Make the interrupt numbers match the OpenPIC spec intead of the Freescale docs which distinguish between internal and external interrupts. Now we can use the interrupt number directly to find the register offset associated with it. Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8540ads.dts | 120 ++++++++++++++++----------------- arch/powerpc/boot/dts/mpc8541cds.dts | 86 +++++++++++------------ arch/powerpc/boot/dts/mpc8544ds.dts | 18 ++--- arch/powerpc/boot/dts/mpc8548cds.dts | 94 +++++++++++++------------- arch/powerpc/boot/dts/mpc8555cds.dts | 86 +++++++++++------------ arch/powerpc/boot/dts/mpc8560ads.dts | 116 +++++++++++++++---------------- arch/powerpc/boot/dts/mpc8568mds.dts | 36 +++++----- arch/powerpc/boot/dts/mpc8641_hpcn.dts | 18 ++--- 8 files changed, 287 insertions(+), 287 deletions(-) (limited to 'arch/powerpc/boot/dts') diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts index 78828b239d0..364a969f5c2 100644 --- a/arch/powerpc/boot/dts/mpc8540ads.dts +++ b/arch/powerpc/boot/dts/mpc8540ads.dts @@ -52,7 +52,7 @@ compatible = "fsl,8540-memory-controller"; reg = <2000 1000>; interrupt-parent = <&mpic>; - interrupts = <2 2>; + interrupts = <12 2>; }; l2-cache-controller@20000 { @@ -61,14 +61,14 @@ cache-line-size = <20>; // 32 bytes cache-size = <40000>; // L2, 256K interrupt-parent = <&mpic>; - interrupts = <0 2>; + interrupts = <10 2>; }; i2c@3000 { device_type = "i2c"; compatible = "fsl-i2c"; reg = <3000 100>; - interrupts = <1b 2>; + interrupts = <2b 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -81,19 +81,19 @@ reg = <24520 20>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; - interrupts = <35 1>; + interrupts = <5 1>; reg = <0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; - interrupts = <35 1>; + interrupts = <5 1>; reg = <1>; device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { interrupt-parent = <&mpic>; - interrupts = <37 1>; + interrupts = <7 1>; reg = <3>; device_type = "ethernet-phy"; }; @@ -113,7 +113,7 @@ */ address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = ; + interrupts = <1d 2 1e 2 22 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; }; @@ -132,7 +132,7 @@ */ address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <13 2 14 2 18 2>; + interrupts = <23 2 24 2 28 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; }; @@ -151,7 +151,7 @@ */ address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <19 2>; + interrupts = <29 2>; interrupt-parent = <&mpic>; phy-handle = <&phy3>; }; @@ -161,7 +161,7 @@ compatible = "ns16550"; reg = <4500 100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? - interrupts = <1a 2>; + interrupts = <2a 2>; interrupt-parent = <&mpic>; }; @@ -170,7 +170,7 @@ compatible = "ns16550"; reg = <4600 100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? - interrupts = <1a 2>; + interrupts = <2a 2>; interrupt-parent = <&mpic>; }; pci@8000 { @@ -178,78 +178,78 @@ interrupt-map = < /* IDSEL 0x02 */ - 1000 0 0 1 &mpic 31 1 - 1000 0 0 2 &mpic 32 1 - 1000 0 0 3 &mpic 33 1 - 1000 0 0 4 &mpic 34 1 + 1000 0 0 1 &mpic 1 1 + 1000 0 0 2 &mpic 2 1 + 1000 0 0 3 &mpic 3 1 + 1000 0 0 4 &mpic 4 1 /* IDSEL 0x03 */ - 1800 0 0 1 &mpic 34 1 - 1800 0 0 2 &mpic 31 1 - 1800 0 0 3 &mpic 32 1 - 1800 0 0 4 &mpic 33 1 + 1800 0 0 1 &mpic 4 1 + 1800 0 0 2 &mpic 1 1 + 1800 0 0 3 &mpic 2 1 + 1800 0 0 4 &mpic 3 1 /* IDSEL 0x04 */ - 2000 0 0 1 &mpic 33 1 - 2000 0 0 2 &mpic 34 1 - 2000 0 0 3 &mpic 31 1 - 2000 0 0 4 &mpic 32 1 + 2000 0 0 1 &mpic 3 1 + 2000 0 0 2 &mpic 4 1 + 2000 0 0 3 &mpic 1 1 + 2000 0 0 4 &mpic 2 1 /* IDSEL 0x05 */ - 2800 0 0 1 &mpic 32 1 - 2800 0 0 2 &mpic 33 1 - 2800 0 0 3 &mpic 34 1 - 2800 0 0 4 &mpic 31 1 + 2800 0 0 1 &mpic 2 1 + 2800 0 0 2 &mpic 3 1 + 2800 0 0 3 &mpic 4 1 + 2800 0 0 4 &mpic 1 1 /* IDSEL 0x0c */ - 6000 0 0 1 &mpic 31 1 - 6000 0 0 2 &mpic 32 1 - 6000 0 0 3 &mpic 33 1 - 6000 0 0 4 &mpic 34 1 + 6000 0 0 1 &mpic 1 1 + 6000 0 0 2 &mpic 2 1 + 6000 0 0 3 &mpic 3 1 + 6000 0 0 4 &mpic 4 1 /* IDSEL 0x0d */ - 6800 0 0 1 &mpic 34 1 - 6800 0 0 2 &mpic 31 1 - 6800 0 0 3 &mpic 32 1 - 6800 0 0 4 &mpic 33 1 + 6800 0 0 1 &mpic 4 1 + 6800 0 0 2 &mpic 1 1 + 6800 0 0 3 &mpic 2 1 + 6800 0 0 4 &mpic 3 1 /* IDSEL 0x0e */ - 7000 0 0 1 &mpic 33 1 - 7000 0 0 2 &mpic 34 1 - 7000 0 0 3 &mpic 31 1 - 7000 0 0 4 &mpic 32 1 + 7000 0 0 1 &mpic 3 1 + 7000 0 0 2 &mpic 4 1 + 7000 0 0 3 &mpic 1 1 + 7000 0 0 4 &mpic 2 1 /* IDSEL 0x0f */ - 7800 0 0 1 &mpic 32 1 - 7800 0 0 2 &mpic 33 1 - 7800 0 0 3 &mpic 34 1 - 7800 0 0 4 &mpic 31 1 + 7800 0 0 1 &mpic 2 1 + 7800 0 0 2 &mpic 3 1 + 7800 0 0 3 &mpic 4 1 + 7800 0 0 4 &mpic 1 1 /* IDSEL 0x12 */ - 9000 0 0 1 &mpic 31 1 - 9000 0 0 2 &mpic 32 1 - 9000 0 0 3 &mpic 33 1 - 9000 0 0 4 &mpic 34 1 + 9000 0 0 1 &mpic 1 1 + 9000 0 0 2 &mpic 2 1 + 9000 0 0 3 &mpic 3 1 + 9000 0 0 4 &mpic 4 1 /* IDSEL 0x13 */ - 9800 0 0 1 &mpic 34 1 - 9800 0 0 2 &mpic 31 1 - 9800 0 0 3 &mpic 32 1 - 9800 0 0 4 &mpic 33 1 + 9800 0 0 1 &mpic 4 1 + 9800 0 0 2 &mpic 1 1 + 9800 0 0 3 &mpic 2 1 + 9800 0 0 4 &mpic 3 1 /* IDSEL 0x14 */ - a000 0 0 1 &mpic 33 1 - a000 0 0 2 &mpic 34 1 - a000 0 0 3 &mpic 31 1 - a000 0 0 4 &mpic 32 1 + a000 0 0 1 &mpic 3 1 + a000 0 0 2 &mpic 4 1 + a000 0 0 3 &mpic 1 1 + a000 0 0 4 &mpic 2 1 /* IDSEL 0x15 */ - a800 0 0 1 &mpic 32 1 - a800 0 0 2 &mpic 33 1 - a800 0 0 3 &mpic 34 1 - a800 0 0 4 &mpic 31 1>; + a800 0 0 1 &mpic 2 1 + a800 0 0 2 &mpic 3 1 + a800 0 0 3 &mpic 4 1 + a800 0 0 4 &mpic 1 1>; interrupt-parent = <&mpic>; - interrupts = <08 2>; + interrupts = <18 2>; bus-range = <0 0>; ranges = <02000000 0 80000000 80000000 0 20000000 01000000 0 00000000 e2000000 0 00100000>; diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts index 2a0afbcebe3..c35f1690f2c 100644 --- a/arch/powerpc/boot/dts/mpc8541cds.dts +++ b/arch/powerpc/boot/dts/mpc8541cds.dts @@ -52,7 +52,7 @@ compatible = "fsl,8541-memory-controller"; reg = <2000 1000>; interrupt-parent = <&mpic>; - interrupts = <2 2>; + interrupts = <12 2>; }; l2-cache-controller@20000 { @@ -61,14 +61,14 @@ cache-line-size = <20>; // 32 bytes cache-size = <40000>; // L2, 256K interrupt-parent = <&mpic>; - interrupts = <0 2>; + interrupts = <10 2>; }; i2c@3000 { device_type = "i2c"; compatible = "fsl-i2c"; reg = <3000 100>; - interrupts = <1b 2>; + interrupts = <2b 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -81,13 +81,13 @@ reg = <24520 20>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; - interrupts = <35 0>; + interrupts = <5 0>; reg = <0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; - interrupts = <35 0>; + interrupts = <5 0>; reg = <1>; device_type = "ethernet-phy"; }; @@ -101,7 +101,7 @@ compatible = "gianfar"; reg = <24000 1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = ; + interrupts = <1d 2 1e 2 22 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; }; @@ -114,7 +114,7 @@ compatible = "gianfar"; reg = <25000 1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <13 2 14 2 18 2>; + interrupts = <23 2 24 2 28 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; }; @@ -124,7 +124,7 @@ compatible = "ns16550"; reg = <4500 100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? - interrupts = <1a 2>; + interrupts = <2a 2>; interrupt-parent = <&mpic>; }; @@ -133,7 +133,7 @@ compatible = "ns16550"; reg = <4600 100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? - interrupts = <1a 2>; + interrupts = <2a 2>; interrupt-parent = <&mpic>; }; @@ -142,49 +142,49 @@ interrupt-map = < /* IDSEL 0x10 */ - 08000 0 0 1 &mpic 30 1 - 08000 0 0 2 &mpic 31 1 - 08000 0 0 3 &mpic 32 1 - 08000 0 0 4 &mpic 33 1 + 08000 0 0 1 &mpic 0 1 + 08000 0 0 2 &mpic 1 1 + 08000 0 0 3 &mpic 2 1 + 08000 0 0 4 &mpic 3 1 /* IDSEL 0x11 */ - 08800 0 0 1 &mpic 30 1 - 08800 0 0 2 &mpic 31 1 - 08800 0 0 3 &mpic 32 1 - 08800 0 0 4 &mpic 33 1 + 08800 0 0 1 &mpic 0 1 + 08800 0 0 2 &mpic 1 1 + 08800 0 0 3 &mpic 2 1 + 08800 0 0 4 &mpic 3 1 /* IDSEL 0x12 (Slot 1) */ - 09000 0 0 1 &mpic 30 1 - 09000 0 0 2 &mpic 31 1 - 09000 0 0 3 &mpic 32 1 - 09000 0 0 4 &mpic 33 1 + 09000 0 0 1 &mpic 0 1 + 09000 0 0 2 &mpic 1 1 + 09000 0 0 3 &mpic 2 1 + 09000 0 0 4 &mpic 3 1 /* IDSEL 0x13 (Slot 2) */ - 09800 0 0 1 &mpic 31 1 - 09800 0 0 2 &mpic 32 1 - 09800 0 0 3 &mpic 33 1 - 09800 0 0 4 &mpic 30 1 + 09800 0 0 1 &mpic 1 1 + 09800 0 0 2 &mpic 2 1 + 09800 0 0 3 &mpic 3 1 + 09800 0 0 4 &mpic 0 1 /* IDSEL 0x14 (Slot 3) */ - 0a000 0 0 1 &mpic 32 1 - 0a000 0 0 2 &mpic 33 1 - 0a000 0 0 3 &mpic 30 1 - 0a000 0 0 4 &mpic 31 1 + 0a000 0 0 1 &mpic 2 1 + 0a000 0 0 2 &mpic 3 1 + 0a000 0 0 3 &mpic 0 1 + 0a000 0 0 4 &mpic 1 1 /* IDSEL 0x15 (Slot 4) */ - 0a800 0 0 1 &mpic 33 1 - 0a800 0 0 2 &mpic 30 1 - 0a800 0 0 3 &mpic 31 1 - 0a800 0 0 4 &mpic 32 1 + 0a800 0 0 1 &mpic 3 1 + 0a800 0 0 2 &mpic 0 1 + 0a800 0 0 3 &mpic 1 1 + 0a800 0 0 4 &mpic 2 1 /* Bus 1 (Tundra Bridge) */ /* IDSEL 0x12 (ISA bridge) */ - 19000 0 0 1 &mpic 30 1 - 19000 0 0 2 &mpic 31 1 - 19000 0 0 3 &mpic 32 1 - 19000 0 0 4 &mpic 33 1>; + 19000 0 0 1 &mpic 0 1 + 19000 0 0 2 &mpic 1 1 + 19000 0 0 3 &mpic 2 1 + 19000 0 0 4 &mpic 3 1>; interrupt-parent = <&mpic>; - interrupts = <08 2>; + interrupts = <18 2>; bus-range = <0 0>; ranges = <02000000 0 80000000 80000000 0 20000000 01000000 0 00000000 e2000000 0 00100000>; @@ -216,12 +216,12 @@ interrupt-map = < /* IDSEL 0x15 */ - a800 0 0 1 &mpic 3b 1 - a800 0 0 2 &mpic 3b 1 - a800 0 0 3 &mpic 3b 1 - a800 0 0 4 &mpic 3b 1>; + a800 0 0 1 &mpic b 1 + a800 0 0 2 &mpic b 1 + a800 0 0 3 &mpic b 1 + a800 0 0 4 &mpic b 1>; interrupt-parent = <&mpic>; - interrupts = <09 2>; + interrupts = <19 2>; bus-range = <0 0>; ranges = <02000000 0 a0000000 a0000000 0 20000000 01000000 0 00000000 e3000000 0 00100000>; diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts index 3033599e74e..82859259246 100644 --- a/arch/powerpc/boot/dts/mpc8544ds.dts +++ b/arch/powerpc/boot/dts/mpc8544ds.dts @@ -52,7 +52,7 @@ compatible = "fsl,8544-memory-controller"; reg = <2000 1000>; interrupt-parent = <&mpic>; - interrupts = <2 2>; + interrupts = <12 2>; }; l2-cache-controller@20000 { @@ -61,14 +61,14 @@ cache-line-size = <20>; // 32 bytes cache-size = <40000>; // L2, 256K interrupt-parent = <&mpic>; - interrupts = <0 2>; + interrupts = <10 2>; }; i2c@3000 { device_type = "i2c"; compatible = "fsl-i2c"; reg = <3000 100>; - interrupts = <1b 2>; + interrupts = <2b 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -81,13 +81,13 @@ reg = <24520 20>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; - interrupts = <3a 1>; + interrupts = ; reg = <0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; - interrupts = <3a 1>; + interrupts = ; reg = <1>; device_type = "ethernet-phy"; }; @@ -101,7 +101,7 @@ compatible = "gianfar"; reg = <24000 1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = ; + interrupts = <1d 2 1e 2 22 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; }; @@ -114,7 +114,7 @@ compatible = "gianfar"; reg = <26000 1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = ; + interrupts = <1f 2 20 2 21 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; }; @@ -124,7 +124,7 @@ compatible = "ns16550"; reg = <4500 100>; clock-frequency = <0>; - interrupts = <1a 2>; + interrupts = <2a 2>; interrupt-parent = <&mpic>; }; @@ -133,7 +133,7 @@ compatible = "ns16550"; reg = <4600 100>; clock-frequency = <0>; - interrupts = <1a 2>; + interrupts = <2a 2>; interrupt-parent = <&mpic>; }; diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts index ea9b1266263..2293036f762 100644 --- a/arch/powerpc/boot/dts/mpc8548cds.dts +++ b/arch/powerpc/boot/dts/mpc8548cds.dts @@ -52,7 +52,7 @@ compatible = "fsl,8548-memory-controller"; reg = <2000 1000>; interrupt-parent = <&mpic>; - interrupts = <2 2>; + interrupts = <12 2>; }; l2-cache-controller@20000 { @@ -61,14 +61,14 @@ cache-line-size = <20>; // 32 bytes cache-size = <80000>; // L2, 512K interrupt-parent = <&mpic>; - interrupts = <0 2>; + interrupts = <10 2>; }; i2c@3000 { device_type = "i2c"; compatible = "fsl-i2c"; reg = <3000 100>; - interrupts = <1b 2>; + interrupts = <2b 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -81,25 +81,25 @@ reg = <24520 20>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; - interrupts = <35 0>; + interrupts = <5 0>; reg = <0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; - interrupts = <35 0>; + interrupts = <5 0>; reg = <1>; device_type = "ethernet-phy"; }; phy2: ethernet-phy@2 { interrupt-parent = <&mpic>; - interrupts = <35 0>; + interrupts = <5 0>; reg = <2>; device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { interrupt-parent = <&mpic>; - interrupts = <35 0>; + interrupts = <5 0>; reg = <3>; device_type = "ethernet-phy"; }; @@ -113,7 +113,7 @@ compatible = "gianfar"; reg = <24000 1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = ; + interrupts = <1d 2 1e 2 22 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; }; @@ -126,7 +126,7 @@ compatible = "gianfar"; reg = <25000 1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <13 2 14 2 18 2>; + interrupts = <23 2 24 2 28 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; }; @@ -140,7 +140,7 @@ compatible = "gianfar"; reg = <26000 1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = ; + interrupts = <1f 2 20 2 21 2>; interrupt-parent = <&mpic>; phy-handle = <&phy2>; }; @@ -153,7 +153,7 @@ compatible = "gianfar"; reg = <27000 1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <15 2 16 2 17 2>; + interrupts = <25 2 26 2 27 2>; interrupt-parent = <&mpic>; phy-handle = <&phy3>; }; @@ -164,7 +164,7 @@ compatible = "ns16550"; reg = <4500 100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? - interrupts = <1a 2>; + interrupts = <2a 2>; interrupt-parent = <&mpic>; }; @@ -173,7 +173,7 @@ compatible = "ns16550"; reg = <4600 100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? - interrupts = <1a 2>; + interrupts = <2a 2>; interrupt-parent = <&mpic>; }; @@ -188,49 +188,49 @@ interrupt-map = < /* IDSEL 0x10 */ - 08000 0 0 1 &mpic 30 1 - 08000 0 0 2 &mpic 31 1 - 08000 0 0 3 &mpic 32 1 - 08000 0 0 4 &mpic 33 1 + 08000 0 0 1 &mpic 0 1 + 08000 0 0 2 &mpic 1 1 + 08000 0 0 3 &mpic 2 1 + 08000 0 0 4 &mpic 3 1 /* IDSEL 0x11 */ - 08800 0 0 1 &mpic 30 1 - 08800 0 0 2 &mpic 31 1 - 08800 0 0 3 &mpic 32 1 - 08800 0 0 4 &mpic 33 1 + 08800 0 0 1 &mpic 0 1 + 08800 0 0 2 &mpic 1 1 + 08800 0 0 3 &mpic 2 1 + 08800 0 0 4 &mpic 3 1 /* IDSEL 0x12 (Slot 1) */ - 09000 0 0 1 &mpic 30 1 - 09000 0 0 2 &mpic 31 1 - 09000 0 0 3 &mpic 32 1 - 09000 0 0 4 &mpic 33 1 + 09000 0 0 1 &mpic 0 1 + 09000 0 0 2 &mpic 1 1 + 09000 0 0 3 &mpic 2 1 + 09000 0 0 4 &mpic 3 1 /* IDSEL 0x13 (Slot 2) */ - 09800 0 0 1 &mpic 31 1 - 09800 0 0 2 &mpic 32 1 - 09800 0 0 3 &mpic 33 1 - 09800 0 0 4 &mpic 30 1 + 09800 0 0 1 &mpic 1 1 + 09800 0 0 2 &mpic 2 1 + 09800 0 0 3 &mpic 3 1 + 09800 0 0 4 &mpic 0 1 /* IDSEL 0x14 (Slot 3) */ - 0a000 0 0 1 &mpic 32 1 - 0a000 0 0 2 &mpic 33 1 - 0a000 0 0 3 &mpic 30 1 - 0a000 0 0 4 &mpic 31 1 + 0a000 0 0 1 &mpic 2 1 + 0a000 0 0 2 &mpic 3 1 + 0a000 0 0 3 &mpic 0 1 + 0a000 0 0 4 &mpic 1 1 /* IDSEL 0x15 (Slot 4) */ - 0a800 0 0 1 &mpic 33 1 - 0a800 0 0 2 &mpic 30 1 - 0a800 0 0 3 &mpic 31 1 - 0a800 0 0 4 &mpic 32 1 + 0a800 0 0 1 &mpic 3 1 + 0a800 0 0 2 &mpic 0 1 + 0a800 0 0 3 &mpic 1 1 + 0a800 0 0 4 &mpic 2 1 /* Bus 1 (Tundra Bridge) */ /* IDSEL 0x12 (ISA bridge) */ - 19000 0 0 1 &mpic 30 1 - 19000 0 0 2 &mpic 31 1 - 19000 0 0 3 &mpic 32 1 - 19000 0 0 4 &mpic 33 1>; + 19000 0 0 1 &mpic 0 1 + 19000 0 0 2 &mpic 1 1 + 19000 0 0 3 &mpic 2 1 + 19000 0 0 4 &mpic 3 1>; interrupt-parent = <&mpic>; - interrupts = <08 2>; + interrupts = <18 2>; bus-range = <0 0>; ranges = <02000000 0 80000000 80000000 0 20000000 01000000 0 00000000 e2000000 0 00100000>; @@ -262,12 +262,12 @@ interrupt-map = < /* IDSEL 0x15 */ - a800 0 0 1 &mpic 3b 1 - a800 0 0 2 &mpic 3b 1 - a800 0 0 3 &mpic 3b 1 - a800 0 0 4 &mpic 3b 1>; + a800 0 0 1 &mpic b 1 + a800 0 0 2 &mpic b 1 + a800 0 0 3 &mpic b 1 + a800 0 0 4 &mpic b 1>; interrupt-parent = <&mpic>; - interrupts = <09 2>; + interrupts = <19 2>; bus-range = <0 0>; ranges = <02000000 0 a0000000 a0000000 0 20000000 01000000 0 00000000 e3000000 0 00100000>; diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts index c41ee616603..9b7268964e9 100644 --- a/arch/powerpc/boot/dts/mpc8555cds.dts +++ b/arch/powerpc/boot/dts/mpc8555cds.dts @@ -52,7 +52,7 @@ compatible = "fsl,8555-memory-controller"; reg = <2000 1000>; interrupt-parent = <&mpic>; - interrupts = <2 2>; + interrupts = <12 2>; }; l2-cache-controller@20000 { @@ -61,14 +61,14 @@ cache-line-size = <20>; // 32 bytes cache-size = <40000>; // L2, 256K interrupt-parent = <&mpic>; - interrupts = <0 2>; + interrupts = <10 2>; }; i2c@3000 { device_type = "i2c"; compatible = "fsl-i2c"; reg = <3000 100>; - interrupts = <1b 2>; + interrupts = <2b 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -81,13 +81,13 @@ reg = <24520 20>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; - interrupts = <35 0>; + interrupts = <5 0>; reg = <0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; - interrupts = <35 0>; + interrupts = <5 0>; reg = <1>; device_type = "ethernet-phy"; }; @@ -101,7 +101,7 @@ compatible = "gianfar"; reg = <24000 1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <0d 2 0e 2 12 2>; + interrupts = <1d 2 1e 2 22 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; }; @@ -114,7 +114,7 @@ compatible = "gianfar"; reg = <25000 1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <13 2 14 2 18 2>; + interrupts = <23 2 24 2 28 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; }; @@ -124,7 +124,7 @@ compatible = "ns16550"; reg = <4500 100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? - interrupts = <1a 2>; + interrupts = <2a 2>; interrupt-parent = <&mpic>; }; @@ -133,7 +133,7 @@ compatible = "ns16550"; reg = <4600 100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? - interrupts = <1a 2>; + interrupts = <2a 2>; interrupt-parent = <&mpic>; }; @@ -142,49 +142,49 @@ interrupt-map = < /* IDSEL 0x10 */ - 08000 0 0 1 &mpic 30 1 - 08000 0 0 2 &mpic 31 1 - 08000 0 0 3 &mpic 32 1 - 08000 0 0 4 &mpic 33 1 + 08000 0 0 1 &mpic 0 1 + 08000 0 0 2 &mpic 1 1 + 08000 0 0 3 &mpic 2 1 + 08000 0 0 4 &mpic 3 1 /* IDSEL 0x11 */ - 08800 0 0 1 &mpic 30 1 - 08800 0 0 2 &mpic 31 1 - 08800 0 0 3 &mpic 32 1 - 08800 0 0 4 &mpic 33 1 + 08800 0 0 1 &mpic 0 1 + 08800 0 0 2 &mpic 1 1 + 08800 0 0 3 &mpic 2 1 + 08800 0 0 4 &mpic 3 1 /* IDSEL 0x12 (Slot 1) */ - 09000 0 0 1 &mpic 30 1 - 09000 0 0 2 &mpic 31 1 - 09000 0 0 3 &mpic 32 1 - 09000 0 0 4 &mpic 33 1 + 09000 0 0 1 &mpic 0 1 + 09000 0 0 2 &mpic 1 1 + 09000 0 0 3 &mpic 2 1 + 09000 0 0 4 &mpic 3 1 /* IDSEL 0x13 (Slot 2) */ - 09800 0 0 1 &mpic 31 1 - 09800 0 0 2 &mpic 32 1 - 09800 0 0 3 &mpic 33 1 - 09800 0 0 4 &mpic 30 1 + 09800 0 0 1 &mpic 1 1 + 09800 0 0 2 &mpic 2 1 + 09800 0 0 3 &mpic 3 1 + 09800 0 0 4 &mpic 0 1 /* IDSEL 0x14 (Slot 3) */ - 0a000 0 0 1 &mpic 32 1 - 0a000 0 0 2 &mpic 33 1 - 0a000 0 0 3 &mpic 30 1 - 0a000 0 0 4 &mpic 31 1 + 0a000 0 0 1 &mpic 2 1 + 0a000 0 0 2 &mpic 3 1 + 0a000 0 0 3 &mpic 0 1 + 0a000 0 0 4 &mpic 1 1 /* IDSEL 0x15 (Slot 4) */ - 0a800 0 0 1 &mpic 33 1 - 0a800 0 0 2 &mpic 30 1 - 0a800 0 0 3 &mpic 31 1 - 0a800 0 0 4 &mpic 32 1 + 0a800 0 0 1 &mpic 3 1 + 0a800 0 0 2 &mpic 0 1 + 0a800 0 0 3 &mpic 1 1 + 0a800 0 0 4 &mpic 2 1 /* Bus 1 (Tundra Bridge) */ /* IDSEL 0x12 (ISA bridge) */ - 19000 0 0 1 &mpic 30 1 - 19000 0 0 2 &mpic 31 1 - 19000 0 0 3 &mpic 32 1 - 19000 0 0 4 &mpic 33 1>; + 19000 0 0 1 &mpic 0 1 + 19000 0 0 2 &mpic 1 1 + 19000 0 0 3 &mpic 2 1 + 19000 0 0 4 &mpic 3 1>; interrupt-parent = <&mpic>; - interrupts = <08 2>; + interrupts = <18 2>; bus-range = <0 0>; ranges = <02000000 0 80000000 80000000 0 20000000 01000000 0 00000000 e2000000 0 00100000>; @@ -216,12 +216,12 @@ interrupt-map = < /* IDSEL 0x15 */ - a800 0 0 1 &mpic 3b 1 - a800 0 0 2 &mpic 3b 1 - a800 0 0 3 &mpic 3b 1 - a800 0 0 4 &mpic 3b 1>; + a800 0 0 1 &mpic b 1 + a800 0 0 2 &mpic b 1 + a800 0 0 3 &mpic b 1 + a800 0 0 4 &mpic b 1>; interrupt-parent = <&mpic>; - interrupts = <09 2>; + interrupts = <19 2>; bus-range = <0 0>; ranges = <02000000 0 a0000000 a0000000 0 20000000 01000000 0 00000000 e3000000 0 00100000>; diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts index 205ee3219ec..2d41d549c21 100644 --- a/arch/powerpc/boot/dts/mpc8560ads.dts +++ b/arch/powerpc/boot/dts/mpc8560ads.dts @@ -52,7 +52,7 @@ compatible = "fsl,8540-memory-controller"; reg = <2000 1000>; interrupt-parent = <&mpic>; - interrupts = <2 2>; + interrupts = <12 2>; }; l2-cache-controller@20000 { @@ -61,7 +61,7 @@ cache-line-size = <20>; // 32 bytes cache-size = <40000>; // L2, 256K interrupt-parent = <&mpic>; - interrupts = <0 2>; + interrupts = <10 2>; }; mdio@24520 { @@ -72,25 +72,25 @@ #size-cells = <0>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; - interrupts = <35 1>; + interrupts = <5 1>; reg = <0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; - interrupts = <35 1>; + interrupts = <5 1>; reg = <1>; device_type = "ethernet-phy"; }; phy2: ethernet-phy@2 { interrupt-parent = <&mpic>; - interrupts = <37 1>; + interrupts = <7 1>; reg = <2>; device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { interrupt-parent = <&mpic>; - interrupts = <37 1>; + interrupts = <7 1>; reg = <3>; device_type = "ethernet-phy"; }; @@ -108,7 +108,7 @@ */ address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = ; + interrupts = <1d 2 1e 2 22 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; }; @@ -127,7 +127,7 @@ */ address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <13 2 14 2 18 2>; + interrupts = <23 2 24 2 28 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; }; @@ -144,79 +144,79 @@ interrupt-map = < /* IDSEL 0x2 */ - 1000 0 0 1 &mpic 31 1 - 1000 0 0 2 &mpic 32 1 - 1000 0 0 3 &mpic 33 1 - 1000 0 0 4 &mpic 34 1 + 1000 0 0 1 &mpic 1 1 + 1000 0 0 2 &mpic 2 1 + 1000 0 0 3 &mpic 3 1 + 1000 0 0 4 &mpic 4 1 /* IDSEL 0x3 */ - 1800 0 0 1 &mpic 34 1 - 1800 0 0 2 &mpic 31 1 - 1800 0 0 3 &mpic 32 1 - 1800 0 0 4 &mpic 33 1 + 1800 0 0 1 &mpic 4 1 + 1800 0 0 2 &mpic 1 1 + 1800 0 0 3 &mpic 2 1 + 1800 0 0 4 &mpic 3 1 /* IDSEL 0x4 */ - 2000 0 0 1 &mpic 33 1 - 2000 0 0 2 &mpic 34 1 - 2000 0 0 3 &mpic 31 1 - 2000 0 0 4 &mpic 32 1 + 2000 0 0 1 &mpic 3 1 + 2000 0 0 2 &mpic 4 1 + 2000 0 0 3 &mpic 1 1 + 2000 0 0 4 &mpic 2 1 /* IDSEL 0x5 */ - 2800 0 0 1 &mpic 32 1 - 2800 0 0 2 &mpic 33 1 - 2800 0 0 3 &mpic 34 1 - 2800 0 0 4 &mpic 31 1 + 2800 0 0 1 &mpic 2 1 + 2800 0 0 2 &mpic 3 1 + 2800 0 0 3 &mpic 4 1 + 2800 0 0 4 &mpic 1 1 /* IDSEL 12 */ - 6000 0 0 1 &mpic 31 1 - 6000 0 0 2 &mpic 32 1 - 6000 0 0 3 &mpic 33 1 - 6000 0 0 4 &mpic 34 1 + 6000 0 0 1 &mpic 1 1 + 6000 0 0 2 &mpic 2 1 + 6000 0 0 3 &mpic 3 1 + 6000 0 0 4 &mpic 4 1 /* IDSEL 13 */ - 6800 0 0 1 &mpic 34 1 - 6800 0 0 2 &mpic 31 1 - 6800 0 0 3 &mpic 32 1 - 6800 0 0 4 &mpic 33 1 + 6800 0 0 1 &mpic 4 1 + 6800 0 0 2 &mpic 1 1 + 6800 0 0 3 &mpic 2 1 + 6800 0 0 4 &mpic 3 1 /* IDSEL 14*/ - 7000 0 0 1 &mpic 33 1 - 7000 0 0 2 &mpic 34 1 - 7000 0 0 3 &mpic 31 1 - 7000 0 0 4 &mpic 32 1 + 7000 0 0 1 &mpic 3 1 + 7000 0 0 2 &mpic 4 1 + 7000 0 0 3 &mpic 1 1 + 7000 0 0 4 &mpic 2 1 /* IDSEL 15 */ - 7800 0 0 1 &mpic 32 1 - 7800 0 0 2 &mpic 33 1 - 7800 0 0 3 &mpic 34 1 - 7800 0 0 4 &mpic 31 1 + 7800 0 0 1 &mpic 2 1 + 7800 0 0 2 &mpic 3 1 + 7800 0 0 3 &mpic 4 1 + 7800 0 0 4 &mpic 1 1 /* IDSEL 18 */ - 9000 0 0 1 &mpic 31 1 - 9000 0 0 2 &mpic 32 1 - 9000 0 0 3 &mpic 33 1 - 9000 0 0 4 &mpic 34 1 + 9000 0 0 1 &mpic 1 1 + 9000 0 0 2 &mpic 2 1 + 9000 0 0 3 &mpic 3 1 + 9000 0 0 4 &mpic 4 1 /* IDSEL 19 */ - 9800 0 0 1 &mpic 34 1 - 9800 0 0 2 &mpic 31 1 - 9800 0 0 3 &mpic 32 1 - 9800 0 0 4 &mpic 33 1 + 9800 0 0 1 &mpic 4 1 + 9800 0 0 2 &mpic 1 1 + 9800 0 0 3 &mpic 2 1 + 9800 0 0 4 &mpic 3 1 /* IDSEL 20 */ - a000 0 0 1 &mpic 33 1 - a000 0 0 2 &mpic 34 1 - a000 0 0 3 &mpic 31 1 - a000 0 0 4 &mpic 32 1 + a000 0 0 1 &mpic 3 1 + a000 0 0 2 &mpic 4 1 + a000 0 0 3 &mpic 1 1 + a000 0 0 4 &mpic 2 1 /* IDSEL 21 */ - a800 0 0 1 &mpic 32 1 - a800 0 0 2 &mpic 33 1 - a800 0 0 3 &mpic 34 1 - a800 0 0 4 &mpic 31 1>; + a800 0 0 1 &mpic 2 1 + a800 0 0 2 &mpic 3 1 + a800 0 0 3 &mpic 4 1 + a800 0 0 4 &mpic 1 1>; interrupt-parent = <&mpic>; - interrupts = <8 0>; + interrupts = <18 0>; bus-range = <0 0>; ranges = <02000000 0 80000000 80000000 0 20000000 01000000 0 00000000 e2000000 0 01000000>; @@ -246,7 +246,7 @@ interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - interrupts = <1e 0>; + interrupts = <2e 0>; interrupt-parent = <&mpic>; reg = <90c00 80>; built-in; diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts index 479a7a55ede..6bb18f2807a 100644 --- a/arch/powerpc/boot/dts/mpc8568mds.dts +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -61,7 +61,7 @@ compatible = "fsl,8568-memory-controller"; reg = <2000 1000>; interrupt-parent = <&mpic>; - interrupts = <2 2>; + interrupts = <12 2>; }; l2-cache-controller@20000 { @@ -70,14 +70,14 @@ cache-line-size = <20>; // 32 bytes cache-size = <80000>; // L2, 512K interrupt-parent = <&mpic>; - interrupts = <0 2>; + interrupts = <10 2>; }; i2c@3000 { device_type = "i2c"; compatible = "fsl-i2c"; reg = <3000 100>; - interrupts = <1b 2>; + interrupts = <2b 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -86,7 +86,7 @@ device_type = "i2c"; compatible = "fsl-i2c"; reg = <3100 100>; - interrupts = <1b 2>; + interrupts = <2b 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -99,25 +99,25 @@ reg = <24520 20>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; - interrupts = <31 1>; + interrupts = <1 1>; reg = <0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; - interrupts = <32 1>; + interrupts = <2 1>; reg = <1>; device_type = "ethernet-phy"; }; phy2: ethernet-phy@2 { interrupt-parent = <&mpic>; - interrupts = <31 1>; + interrupts = <1 1>; reg = <2>; device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { interrupt-parent = <&mpic>; - interrupts = <32 1>; + interrupts = <2 1>; reg = <3>; device_type = "ethernet-phy"; }; @@ -137,7 +137,7 @@ */ mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = ; + interrupts = <1d 2 1e 2 22 2>; interrupt-parent = <&mpic>; phy-handle = <&phy2>; }; @@ -156,7 +156,7 @@ */ mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <13 2 14 2 18 2>; + interrupts = <23 2 24 2 28 2>; interrupt-parent = <&mpic>; phy-handle = <&phy3>; }; @@ -166,7 +166,7 @@ compatible = "ns16550"; reg = <4500 100>; clock-frequency = <0>; - interrupts = <1a 2>; + interrupts = <2a 2>; interrupt-parent = <&mpic>; }; @@ -175,7 +175,7 @@ compatible = "ns16550"; reg = <4600 100>; clock-frequency = <0>; - interrupts = <1a 2>; + interrupts = <2a 2>; interrupt-parent = <&mpic>; }; @@ -184,7 +184,7 @@ model = "SEC2"; compatible = "talitos"; reg = <30000 f000>; - interrupts = <1d 2>; + interrupts = <2d 2>; interrupt-parent = <&mpic>; num-channels = <4>; channel-fifo-len = <18>; @@ -359,25 +359,25 @@ * gianfar's MDIO bus */ qe_phy0: ethernet-phy@00 { interrupt-parent = <&mpic>; - interrupts = <31 1>; + interrupts = <1 1>; reg = <0>; device_type = "ethernet-phy"; }; qe_phy1: ethernet-phy@01 { interrupt-parent = <&mpic>; - interrupts = <32 1>; + interrupts = <2 1>; reg = <1>; device_type = "ethernet-phy"; }; qe_phy2: ethernet-phy@02 { interrupt-parent = <&mpic>; - interrupts = <31 1>; + interrupts = <1 1>; reg = <2>; device_type = "ethernet-phy"; }; qe_phy3: ethernet-phy@03 { interrupt-parent = <&mpic>; - interrupts = <32 1>; + interrupts = <2 1>; reg = <3>; device_type = "ethernet-phy"; }; @@ -391,7 +391,7 @@ reg = <80 80>; built-in; big-endian; - interrupts = <1e 2 1e 2>; //high:30 low:30 + interrupts = <2e 2 2e 2>; //high:30 low:30 interrupt-parent = <&mpic>; }; diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts index 4b8ac7231ac..db56a02b748 100644 --- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts @@ -90,25 +90,25 @@ reg = <24520 20>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; - interrupts = <4a 1>; + interrupts = ; reg = <0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; - interrupts = <4a 1>; + interrupts = ; reg = <1>; device_type = "ethernet-phy"; }; phy2: ethernet-phy@2 { interrupt-parent = <&mpic>; - interrupts = <4a 1>; + interrupts = ; reg = <2>; device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { interrupt-parent = <&mpic>; - interrupts = <4a 1>; + interrupts = ; reg = <3>; device_type = "ethernet-phy"; }; @@ -356,7 +356,7 @@ #interrupt-cells = <2>; built-in; compatible = "chrp,iic"; - interrupts = <49 2>; + interrupts = <9 2>; interrupt-parent = <&mpic>; }; @@ -411,10 +411,10 @@ interrupt-map-mask = ; interrupt-map = < /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 44 1 - 0000 0 0 2 &mpic 45 1 - 0000 0 0 3 &mpic 46 1 - 0000 0 0 4 &mpic 47 1 + 0000 0 0 1 &mpic 4 1 + 0000 0 0 2 &mpic 5 1 + 0000 0 0 3 &mpic 6 1 + 0000 0 0 4 &mpic 7 1 >; }; -- cgit v1.2.3 From 58fe255f63716a6442559fa0b3cc2506f6abf506 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 3 Jul 2007 03:05:58 -0500 Subject: [POWERPC] Fix up interrupt senses for MPC85xx boards The PHY is active-low on the MPC85xx CDS and the 8560 ADS just had the wrong sense for the internal PCI and CPM interrupts. Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8541cds.dts | 4 ++-- arch/powerpc/boot/dts/mpc8548cds.dts | 8 ++++---- arch/powerpc/boot/dts/mpc8555cds.dts | 4 ++-- arch/powerpc/boot/dts/mpc8560ads.dts | 4 ++-- 4 files changed, 10 insertions(+), 10 deletions(-) (limited to 'arch/powerpc/boot/dts') diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts index c35f1690f2c..070206fffe8 100644 --- a/arch/powerpc/boot/dts/mpc8541cds.dts +++ b/arch/powerpc/boot/dts/mpc8541cds.dts @@ -81,13 +81,13 @@ reg = <24520 20>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; - interrupts = <5 0>; + interrupts = <5 1>; reg = <0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; - interrupts = <5 0>; + interrupts = <5 1>; reg = <1>; device_type = "ethernet-phy"; }; diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts index 2293036f762..9d0b84b66cd 100644 --- a/arch/powerpc/boot/dts/mpc8548cds.dts +++ b/arch/powerpc/boot/dts/mpc8548cds.dts @@ -81,25 +81,25 @@ reg = <24520 20>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; - interrupts = <5 0>; + interrupts = <5 1>; reg = <0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; - interrupts = <5 0>; + interrupts = <5 1>; reg = <1>; device_type = "ethernet-phy"; }; phy2: ethernet-phy@2 { interrupt-parent = <&mpic>; - interrupts = <5 0>; + interrupts = <5 1>; reg = <2>; device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { interrupt-parent = <&mpic>; - interrupts = <5 0>; + interrupts = <5 1>; reg = <3>; device_type = "ethernet-phy"; }; diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts index 9b7268964e9..17e45d9a382 100644 --- a/arch/powerpc/boot/dts/mpc8555cds.dts +++ b/arch/powerpc/boot/dts/mpc8555cds.dts @@ -81,13 +81,13 @@ reg = <24520 20>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; - interrupts = <5 0>; + interrupts = <5 1>; reg = <0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; - interrupts = <5 0>; + interrupts = <5 1>; reg = <1>; device_type = "ethernet-phy"; }; diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts index 2d41d549c21..21ccaaa2799 100644 --- a/arch/powerpc/boot/dts/mpc8560ads.dts +++ b/arch/powerpc/boot/dts/mpc8560ads.dts @@ -216,7 +216,7 @@ a800 0 0 4 &mpic 1 1>; interrupt-parent = <&mpic>; - interrupts = <18 0>; + interrupts = <18 2>; bus-range = <0 0>; ranges = <02000000 0 80000000 80000000 0 20000000 01000000 0 00000000 e2000000 0 01000000>; @@ -246,7 +246,7 @@ interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - interrupts = <2e 0>; + interrupts = <2e 2>; interrupt-parent = <&mpic>; reg = <90c00 80>; built-in; -- cgit v1.2.3 From 80128ff79d282cf71b1819dbca9b8dd47d8ed3e8 Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Mon, 9 Jul 2007 11:37:35 -0700 Subject: [POWERPC] 8xx: mpc885ads pcmcia support Adds support for PowerQuicc on-chip PCMCIA. The driver is implemented as of_device, so only arch/powerpc stuff is capable to use it, which now implies only mpc885ads reference board. To cope with the code that should be hooked inside driver, but is really board specific (like set_voltage), global structure mpc8xx_pcmcia_ops holds necessary function pointers that are filled in the BSP code. [akpm@linux-foundation.org: whitespace diddles] Signed-off-by: Vitaly Bordug Acked-by: Arnd Bergmann Acked-by: Olof Johansson Cc: Dominik Brodowski Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc885ads.dts | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch/powerpc/boot/dts') diff --git a/arch/powerpc/boot/dts/mpc885ads.dts b/arch/powerpc/boot/dts/mpc885ads.dts index 110bf617060..aee01087a93 100644 --- a/arch/powerpc/boot/dts/mpc885ads.dts +++ b/arch/powerpc/boot/dts/mpc885ads.dts @@ -112,6 +112,17 @@ compatible = "CPM"; }; + pcmcia@0080 { + #address-cells = <3>; + #interrupt-cells = <1>; + #size-cells = <2>; + compatible = "fsl,pq-pcmcia"; + device_type = "pcmcia"; + reg = <80 80>; + interrupt-parent = ; + interrupts = ; + }; + cpm@ff000000 { linux,phandle = ; #address-cells = <1>; -- cgit v1.2.3 From b8ce2272becc87894d95cbdbba42ae72115131f2 Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Mon, 9 Jul 2007 11:37:36 -0700 Subject: [POWERPC] dts: kill hardcoded phandles Removed explicit linux,phandle usage. Using references and labels now in PQ and PQ2 boards currently supported in arch/powerpc. Signed-off-by: Vitaly Bordug Cc: Arnd Bergmann Cc: Olof Johansson Cc: Dominik Brodowski Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8272ads.dts | 42 ++++++++++++--------------------- arch/powerpc/boot/dts/mpc866ads.dts | 31 +++++++++---------------- arch/powerpc/boot/dts/mpc885ads.dts | 45 ++++++++++++++---------------------- 3 files changed, 43 insertions(+), 75 deletions(-) (limited to 'arch/powerpc/boot/dts') diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts index 423eedcf634..1934b800278 100644 --- a/arch/powerpc/boot/dts/mpc8272ads.dts +++ b/arch/powerpc/boot/dts/mpc8272ads.dts @@ -14,12 +14,10 @@ compatible = "MPC8260ADS"; #address-cells = <1>; #size-cells = <1>; - linux,phandle = <100>; cpus { #address-cells = <1>; #size-cells = <0>; - linux,phandle = <200>; PowerPC,8272@0 { device_type = "cpu"; @@ -32,12 +30,10 @@ bus-frequency = <0>; clock-frequency = <0>; 32-bit; - linux,phandle = <201>; }; }; - interrupt-controller@f8200000 { - linux,phandle = ; + pci_pic: interrupt-controller@f8200000 { #address-cells = <0>; #interrupt-cells = <2>; interrupt-controller; @@ -47,15 +43,13 @@ }; memory { device_type = "memory"; - linux,phandle = <300>; reg = <00000000 4000000 f4500000 00000020>; }; chosen { name = "chosen"; linux,platform = <0>; - interrupt-controller = <10c00>; - linux,phandle = <400>; + interrupt-controller = <&Cpm_pic>; }; soc8272@f0000000 { @@ -70,20 +64,17 @@ device_type = "mdio"; compatible = "fs_enet"; reg = <0 0>; - linux,phandle = <24520>; #address-cells = <1>; #size-cells = <0>; - ethernet-phy@0 { - linux,phandle = <2452000>; - interrupt-parent = <10c00>; + phy0:ethernet-phy@0 { + interrupt-parent = <&Cpm_pic>; interrupts = <17 4>; reg = <0>; bitbang = [ 12 12 13 02 02 01 ]; device_type = "ethernet-phy"; }; - ethernet-phy@1 { - linux,phandle = <2452001>; - interrupt-parent = <10c00>; + phy1:ethernet-phy@1 { + interrupt-parent = <&Cpm_pic>; interrupts = <17 4>; bitbang = [ 12 12 13 02 02 01 ]; reg = <3>; @@ -101,8 +92,8 @@ reg = <11300 20 8400 100 11380 30>; mac-address = [ 00 11 2F 99 43 54 ]; interrupts = <20 2>; - interrupt-parent = <10c00>; - phy-handle = <2452000>; + interrupt-parent = <&Cpm_pic>; + phy-handle = <&Phy0>; rx-clock = <13>; tx-clock = <12>; }; @@ -115,14 +106,13 @@ reg = <11320 20 8500 100 113b0 30>; mac-address = [ 00 11 2F 99 44 54 ]; interrupts = <21 2>; - interrupt-parent = <10c00>; - phy-handle = <2452001>; + interrupt-parent = <&Cpm_pic>; + phy-handle = <&Phy1>; rx-clock = <17>; tx-clock = <18>; }; cpm@f0000000 { - linux,phandle = ; #address-cells = <1>; #size-cells = <1>; #interrupt-cells = <2>; @@ -142,7 +132,7 @@ reg = <11a00 20 8000 100>; current-speed = <1c200>; interrupts = <28 2>; - interrupt-parent = <10c00>; + interrupt-parent = <&Cpm_pic>; clock-setup = <0 00ffffff>; rx-clock = <1>; tx-clock = <1>; @@ -156,15 +146,14 @@ reg = <11a60 20 8300 100>; current-speed = <1c200>; interrupts = <2b 2>; - interrupt-parent = <10c00>; + interrupt-parent = <&Cpm_pic>; clock-setup = <1b ffffff00>; rx-clock = <4>; tx-clock = <4>; }; }; - interrupt-controller@10c00 { - linux,phandle = <10c00>; + cpm_pic:interrupt-controller@10c00 { #address-cells = <0>; #interrupt-cells = <2>; interrupt-controller; @@ -174,7 +163,6 @@ compatible = "CPM2"; }; pci@0500 { - linux,phandle = <0500>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; @@ -202,7 +190,7 @@ c000 0 0 2 f8200000 43 8 c000 0 0 3 f8200000 40 8 c000 0 0 4 f8200000 41 8>; - interrupt-parent = <10c00>; + interrupt-parent = <&Cpm_pic>; interrupts = <14 8>; bus-range = <0 0>; ranges = <02000000 0 80000000 80000000 0 40000000 @@ -216,7 +204,7 @@ compatible = "talitos"; reg = <30000 10000>; interrupts = ; - interrupt-parent = <10c00>; + interrupt-parent = <&Cpm_pic>; num-channels = <4>; channel-fifo-len = <18>; exec-units-mask = <0000007e>; diff --git a/arch/powerpc/boot/dts/mpc866ads.dts b/arch/powerpc/boot/dts/mpc866ads.dts index c0d06fd1292..e5e7726ddb0 100644 --- a/arch/powerpc/boot/dts/mpc866ads.dts +++ b/arch/powerpc/boot/dts/mpc866ads.dts @@ -15,12 +15,10 @@ compatible = "mpc8xx"; #address-cells = <1>; #size-cells = <1>; - linux,phandle = <100>; cpus { #address-cells = <1>; #size-cells = <0>; - linux,phandle = <200>; PowerPC,866@0 { device_type = "cpu"; @@ -34,14 +32,12 @@ clock-frequency = <0>; 32-bit; interrupts = ; // decrementer interrupt - interrupt-parent = ; - linux,phandle = <201>; + interrupt-parent = <&Mpc8xx_pic>; }; }; memory { device_type = "memory"; - linux,phandle = <300>; reg = <00000000 800000>; }; @@ -57,11 +53,9 @@ device_type = "mdio"; compatible = "fs_enet"; reg = ; - linux,phandle = ; #address-cells = <1>; #size-cells = <0>; - ethernet-phy@f { - linux,phandle = ; + phy: ethernet-phy@f { reg = ; device_type = "ethernet-phy"; }; @@ -75,12 +69,11 @@ reg = ; mac-address = [ 00 00 0C 00 01 FD ]; interrupts = <3 1>; - interrupt-parent = ; - phy-handle = ; + interrupt-parent = <&Mpc8xx_pic>; + phy-handle = <&Phy>; }; - pic@ff000000 { - linux,phandle = ; + mpc8xx_pic: pic@ff000000 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; @@ -91,7 +84,6 @@ }; cpm@ff000000 { - linux,phandle = ; #address-cells = <1>; #size-cells = <1>; #interrupt-cells = <2>; @@ -102,15 +94,14 @@ command-proc = <9c0>; brg-frequency = <0>; interrupts = <0 2>; // cpm error interrupt - interrupt-parent = <930>; + interrupt-parent = <&Cpm_pic>; - pic@930 { - linux,phandle = <930>; + cpm_pic: pic@930 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; interrupts = <5 2 0 2>; - interrupt-parent = ; + interrupt-parent = <&Mpc8xx_pic>; reg = <930 20>; built-in; device_type = "cpm-pic"; @@ -128,7 +119,7 @@ tx-clock = <1>; current-speed = <0>; interrupts = <4 3>; - interrupt-parent = <930>; + interrupt-parent = <&Cpm_pic>; }; smc@a90 { @@ -142,7 +133,7 @@ tx-clock = <2>; current-speed = <0>; interrupts = <3 3>; - interrupt-parent = <930>; + interrupt-parent = <&Cpm_pic>; }; scc@a00 { @@ -153,7 +144,7 @@ reg = ; mac-address = [ 00 00 0C 00 03 FD ]; interrupts = <1e 3>; - interrupt-parent = <930>; + interrupt-parent = <&Cpm_pic>; }; }; }; diff --git a/arch/powerpc/boot/dts/mpc885ads.dts b/arch/powerpc/boot/dts/mpc885ads.dts index aee01087a93..dc7ab9c8061 100644 --- a/arch/powerpc/boot/dts/mpc885ads.dts +++ b/arch/powerpc/boot/dts/mpc885ads.dts @@ -15,12 +15,10 @@ compatible = "mpc8xx"; #address-cells = <1>; #size-cells = <1>; - linux,phandle = <100>; cpus { #address-cells = <1>; #size-cells = <0>; - linux,phandle = <200>; PowerPC,885@0 { device_type = "cpu"; @@ -34,14 +32,12 @@ clock-frequency = <0>; 32-bit; interrupts = ; // decrementer interrupt - interrupt-parent = ; - linux,phandle = <201>; + interrupt-parent = <&Mpc8xx_pic>; }; }; memory { device_type = "memory"; - linux,phandle = <300>; reg = <00000000 800000>; }; @@ -57,21 +53,17 @@ device_type = "mdio"; compatible = "fs_enet"; reg = ; - linux,phandle = ; #address-cells = <1>; #size-cells = <0>; - ethernet-phy@0 { - linux,phandle = ; + Phy0: ethernet-phy@0 { reg = <0>; device_type = "ethernet-phy"; }; - ethernet-phy@1 { - linux,phandle = ; + Phy1: ethernet-phy@1 { reg = <1>; device_type = "ethernet-phy"; }; - ethernet-phy@2 { - linux,phandle = ; + Phy2: ethernet-phy@2 { reg = <2>; device_type = "ethernet-phy"; }; @@ -85,8 +77,8 @@ reg = ; mac-address = [ 00 00 0C 00 01 FD ]; interrupts = <3 1>; - interrupt-parent = ; - phy-handle = ; + interrupt-parent = <&Mpc8xx_pic>; + phy-handle = <&Phy1>; }; fec@1e00 { @@ -97,12 +89,11 @@ reg = <1e00 188>; mac-address = [ 00 00 0C 00 02 FD ]; interrupts = <7 1>; - interrupt-parent = ; - phy-handle = ; + interrupt-parent = <&Mpc8xx_pic>; + phy-handle = <&Phy2>; }; - pic@ff000000 { - linux,phandle = ; + Mpc8xx_pic: pic@ff000000 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; @@ -119,12 +110,11 @@ compatible = "fsl,pq-pcmcia"; device_type = "pcmcia"; reg = <80 80>; - interrupt-parent = ; + interrupt-parent = <&Mpc8xx_pic>; interrupts = ; }; cpm@ff000000 { - linux,phandle = ; #address-cells = <1>; #size-cells = <1>; #interrupt-cells = <2>; @@ -135,15 +125,14 @@ command-proc = <9c0>; brg-frequency = <0>; interrupts = <0 2>; // cpm error interrupt - interrupt-parent = <930>; + interrupt-parent = <&Cpm_pic>; - pic@930 { - linux,phandle = <930>; + Cpm_pic: pic@930 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; interrupts = <5 2 0 2>; - interrupt-parent = ; + interrupt-parent = <&Mpc8xx_pic>; reg = <930 20>; built-in; device_type = "cpm-pic"; @@ -161,7 +150,7 @@ tx-clock = <1>; current-speed = <0>; interrupts = <4 3>; - interrupt-parent = <930>; + interrupt-parent = <&Cpm_pic>; }; smc@a90 { @@ -175,7 +164,7 @@ tx-clock = <2>; current-speed = <0>; interrupts = <3 3>; - interrupt-parent = <930>; + interrupt-parent = <&Cpm_pic>; }; scc@a40 { @@ -186,8 +175,8 @@ reg = ; mac-address = [ 00 00 0C 00 03 FD ]; interrupts = <1c 3>; - interrupt-parent = <930>; - phy-handle = ; + interrupt-parent = <&Cpm_pic>; + phy-handle = <&Phy2>; }; }; }; -- cgit v1.2.3 From 8203c17e5b35408889ec5c358d71110b624519bd Mon Sep 17 00:00:00 2001 From: Li Yang Date: Tue, 10 Jul 2007 16:59:39 +1000 Subject: [POWERPC] Fix typo in Ebony default DTS Signed-off-by: Li Yang Signed-off-by: Paul Mackerras --- arch/powerpc/boot/dts/ebony.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/powerpc/boot/dts') diff --git a/arch/powerpc/boot/dts/ebony.dts b/arch/powerpc/boot/dts/ebony.dts index 586a2fc13c6..c5f99613fc7 100644 --- a/arch/powerpc/boot/dts/ebony.dts +++ b/arch/powerpc/boot/dts/ebony.dts @@ -31,8 +31,8 @@ reg = <0>; clock-frequency = <0>; // Filled in by zImage timebase-frequency = <0>; // Filled in by zImage - i-cache-line-size = <32>; - d-cache-line-size = <32>; + i-cache-line-size = <20>; + d-cache-line-size = <20>; i-cache-size = <8000>; /* 32 kB */ d-cache-size = <8000>; /* 32 kB */ dcr-controller; -- cgit v1.2.3