From d04c56f73c30a5e593202ecfcf25ed43d42363a2 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 4 Oct 2006 16:47:49 +1000 Subject: [POWERPC] Lazy interrupt disabling for 64-bit machines This implements a lazy strategy for disabling interrupts. This means that local_irq_disable() et al. just clear the 'interrupts are enabled' flag in the paca. If an interrupt comes along, the interrupt entry code notices that interrupts are supposed to be disabled, and clears the EE bit in SRR1, clears the 'interrupts are hard-enabled' flag in the paca, and returns. This means that interrupts only actually get disabled in the processor when an interrupt comes along. When interrupts are enabled by local_irq_enable() et al., the code sets the interrupts-enabled flag in the paca, and then checks whether interrupts got hard-disabled. If so, it also sets the EE bit in the MSR to hard-enable the interrupts. This has the potential to improve performance, and also makes it easier to make a kernel that can boot on iSeries and on other 64-bit machines, since this lazy-disable strategy is very similar to the soft-disable strategy that iSeries already uses. This version renames paca->proc_enabled to paca->soft_enabled, and changes a couple of soft-disables in the kexec code to hard-disables, which should fix the crash that Michael Ellerman saw. This doesn't yet use a reserved CR field for the soft_enabled and hard_enabled flags. This applies on top of Stephen Rothwell's patches to make it possible to build a combined iSeries/other kernel. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/setup_64.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/powerpc/kernel/setup_64.c') diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 4b2e32eab9d..b1b0cda3f74 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -223,8 +223,8 @@ void early_setup_secondary(void) { struct paca_struct *lpaca = get_paca(); - /* Mark enabled in PACA */ - lpaca->proc_enabled = 0; + /* Mark interrupts enabled in PACA */ + lpaca->soft_enabled = 0; /* Initialize hash table for that CPU */ htab_initialize_secondary(); -- cgit v1.2.3 From fd6e7d2d6a0231ebfa08e1f9a323497ea548da7d Mon Sep 17 00:00:00 2001 From: "s.hauer@pengutronix.de" Date: Thu, 2 Nov 2006 13:56:10 +0100 Subject: [PATCH] Clean up usage of boot_dev dev_t boot_dev is declared in arch/powerpc/kernel/setup_32.c and in arch/powerpc/kernel/setup_64.c but not used in these files. It is only used in arch/powerpc/platforms/powermac/setup.c, so make it static in this file. Signed-off-by: Sascha Hauer Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/setup_64.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/powerpc/kernel/setup_64.c') diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index b1b0cda3f74..ae6b67ce54e 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -71,7 +71,6 @@ int have_of = 1; int boot_cpuid = 0; -dev_t boot_dev; u64 ppc64_pft_size; /* Pick defaults since we might want to patch instructions -- cgit v1.2.3 From 57744ea95edd340d7140852ce86c743df2cd588c Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Fri, 10 Nov 2006 12:01:02 -0800 Subject: [PATCH] Check for null init_early routine Add a check for a null ppc_md.init_early to allow platforms that don't require an init_early routine to just set this member to null. Signed-off-by: Geoff Levand Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/setup_64.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/powerpc/kernel/setup_64.c') diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index ae6b67ce54e..2fef772edfc 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -380,7 +380,8 @@ void __init setup_system(void) * setting up the hash table pointers. It also sets up some interrupt-mapping * related options that will be used by finish_device_tree() */ - ppc_md.init_early(); + if (ppc_md.init_early) + ppc_md.init_early(); /* * We can discover serial ports now since the above did setup the -- cgit v1.2.3 From 12d04eef927bf61328af2c7cbe756c96f98ac3bf Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sat, 11 Nov 2006 17:25:02 +1100 Subject: [POWERPC] Refactor 64 bits DMA operations This patch completely refactors DMA operations for 64 bits powerpc. 32 bits is untouched for now. We use the new dev_archdata structure to add the dma operations pointer and associated data to struct device. While at it, we also add the OF node pointer and numa node. In the future, we might want to look into merging that with pci_dn as well. The old vio, pci-iommu and pci-direct DMA ops are gone. They are now replaced by a set of generic iommu and direct DMA ops (non PCI specific) that can be used by bus types. The toplevel implementation is now inline. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/setup_64.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/powerpc/kernel/setup_64.c') diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index b0f1c82df99..f7ad64acf47 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3 From 4cb3cee03d558fd457cb58f56c80a2a09a66110c Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sat, 11 Nov 2006 17:25:10 +1100 Subject: [POWERPC] Allow hooking of PCI MMIO & PIO accessors on 64 bits This patch reworks the way iSeries hooks on PCI IO operations (both MMIO and PIO) and provides a generic way for other platforms to do so (we have need to do that for various other platforms). While reworking the IO ops, I ended up doing some spring cleaning in io.h and eeh.h which I might want to split into 2 or 3 patches (among others, eeh.h had a lot of useless stuff in it). A side effect is that EEH for PIO should work now (it used to pass IO ports down to the eeh address check functions which is bogus). Also, new are MMIO "repeat" ops, which other archs like ARM already had, and that we have too now: readsb, readsw, readsl, writesb, writesw, writesl. In the long run, I might also make EEH use the hooks instead of wrapping at the toplevel, which would make things even cleaner and relegate EEH completely in platforms/iseries, but we have to measure the performance impact there (though it's really only on MMIO reads) Since I also need to hook on ioremap, I shuffled the functions a bit there. I introduced ioremap_flags() to use by drivers who want to pass explicit flags to ioremap (and it can be hooked). The old __ioremap() is still there as a low level and cannot be hooked, thus drivers who use it should migrate unless they know they want the low level version. The patch "arch provides generic iomap missing accessors" (should be number 4 in this series) is a pre-requisite to provide full iomap API support with this patch. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/setup_64.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch/powerpc/kernel/setup_64.c') diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index f7ad64acf47..f602a53b1b7 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -599,3 +599,10 @@ void __init setup_per_cpu_areas(void) } } #endif + + +#ifdef CONFIG_PPC_INDIRECT_IO +struct ppc_pci_io ppc_pci_io; +EXPORT_SYMBOL(ppc_pci_io); +#endif /* CONFIG_PPC_INDIRECT_IO */ + -- cgit v1.2.3 From 974a76f51355d22f4f63d83d6bb1ccecd019ec58 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 10 Nov 2006 20:38:53 +1100 Subject: [POWERPC] Distinguish POWER6 partition modes and tell userspace This adds code to look at the properties firmware puts in the device tree to determine what compatibility mode the partition is in on POWER6 machines, and set the ELF aux vector AT_HWCAP and AT_PLATFORM entries appropriately. Specifically, we look at the cpu-version property in the cpu node(s). If that contains a "logical" PVR value (of the form 0x0f00000x), we call identify_cpu again with this PVR value. A value of 0x0f000001 indicates the partition is in POWER5+ compatibility mode, and a value of 0x0f000002 indicates "POWER6 architected" mode, with various extensions disabled. We also look for various other properties: ibm,dfp, ibm,purr and ibm,spurr. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/setup_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc/kernel/setup_64.c') diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index f602a53b1b7..3733de30e84 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -171,7 +171,7 @@ void __init setup_paca(int cpu) void __init early_setup(unsigned long dt_ptr) { /* Identify CPU type */ - identify_cpu(0); + identify_cpu(0, mfspr(SPRN_PVR)); /* Assume we're on cpu 0 for now. Don't write to the paca yet! */ setup_paca(0); -- cgit v1.2.3