From 04d76b937bdf60a8c9ac34e222e3ca977ab9ddc8 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 1 Dec 2006 22:53:48 +0100 Subject: [POWERPC] Linkstation / kurobox support Support for the Kurobox(HG)/LinkStation-I NAS systems by Buffalo Technology, should be also applicable to the PPC TeraStation family. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Kumar Gala Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/embedded6xx/linkstation.c | 211 +++++++++++++++++++++++ 1 file changed, 211 insertions(+) create mode 100644 arch/powerpc/platforms/embedded6xx/linkstation.c (limited to 'arch/powerpc/platforms/embedded6xx/linkstation.c') diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c new file mode 100644 index 00000000000..61599d919ea --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/linkstation.c @@ -0,0 +1,211 @@ +/* + * Board setup routines for the Buffalo Linkstation / Kurobox Platform. + * + * Copyright (C) 2006 G. Liakhovetski (g.liakhovetski@gmx.de) + * + * Based on sandpoint.c by Mark A. Greer + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of + * any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +static struct mtd_partition linkstation_physmap_partitions[] = { + { + .name = "mtd_firmimg", + .offset = 0x000000, + .size = 0x300000, + }, + { + .name = "mtd_bootcode", + .offset = 0x300000, + .size = 0x070000, + }, + { + .name = "mtd_status", + .offset = 0x370000, + .size = 0x010000, + }, + { + .name = "mtd_conf", + .offset = 0x380000, + .size = 0x080000, + }, + { + .name = "mtd_allflash", + .offset = 0x000000, + .size = 0x400000, + }, + { + .name = "mtd_data", + .offset = 0x310000, + .size = 0x0f0000, + }, +}; + +static int __init add_bridge(struct device_node *dev) +{ + int len; + struct pci_controller *hose; + int *bus_range; + + printk("Adding PCI host bridge %s\n", dev->full_name); + + bus_range = (int *) get_property(dev, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) + printk(KERN_WARNING "Can't get bus-range for %s, assume" + " bus 0\n", dev->full_name); + + hose = pcibios_alloc_controller(); + if (hose == NULL) + return -ENOMEM; + hose->first_busno = bus_range ? bus_range[0] : 0; + hose->last_busno = bus_range ? bus_range[1] : 0xff; + hose->arch_data = dev; + setup_indirect_pci(hose, 0xfec00000, 0xfee00000); + + /* Interpret the "ranges" property */ + /* This also maps the I/O region and sets isa_io/mem_base */ + pci_process_bridge_OF_ranges(hose, dev, 1); + + return 0; +} + +static void __init linkstation_setup_arch(void) +{ + struct device_node *np; +#ifdef CONFIG_MTD_PHYSMAP + physmap_set_partitions(linkstation_physmap_partitions, + ARRAY_SIZE(linkstation_physmap_partitions)); +#endif + +#ifdef CONFIG_BLK_DEV_INITRD + if (initrd_start) + ROOT_DEV = Root_RAM0; + else +#endif +#ifdef CONFIG_ROOT_NFS + ROOT_DEV = Root_NFS; +#else + ROOT_DEV = Root_HDA1; +#endif + + /* Lookup PCI host bridges */ + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) + add_bridge(np); + + printk(KERN_INFO "BUFFALO Network Attached Storage Series\n"); + printk(KERN_INFO "(C) 2002-2005 BUFFALO INC.\n"); +} + +/* + * Interrupt setup and service. Interrrupts on the linkstation come + * from the four PCI slots plus onboard 8241 devices: I2C, DUART. + */ +static void __init linkstation_init_IRQ(void) +{ + struct mpic *mpic; + struct device_node *dnp; + void *prop; + int size; + phys_addr_t paddr; + + dnp = of_find_node_by_type(NULL, "open-pic"); + if (dnp == NULL) + return; + + prop = (struct device_node *)get_property(dnp, "reg", &size); + paddr = (phys_addr_t)of_translate_address(dnp, prop); + + mpic = mpic_alloc(dnp, paddr, MPIC_PRIMARY | MPIC_WANTS_RESET, 4, 32, " EPIC "); + BUG_ON(mpic == NULL); + + /* PCI IRQs */ + mpic_assign_isu(mpic, 0, paddr + 0x10200); + + /* I2C */ + mpic_assign_isu(mpic, 1, paddr + 0x11000); + + /* ttyS0, ttyS1 */ + mpic_assign_isu(mpic, 2, paddr + 0x11100); + + mpic_init(mpic); +} + +extern void avr_uart_configure(void); +extern void avr_uart_send(const char); + +static void linkstation_restart(char *cmd) +{ + local_irq_disable(); + + /* Reset system via AVR */ + avr_uart_configure(); + /* Send reboot command */ + avr_uart_send('C'); + + for(;;) /* Spin until reset happens */ + avr_uart_send('G'); /* "kick" */ +} + +static void linkstation_power_off(void) +{ + local_irq_disable(); + + /* Power down system via AVR */ + avr_uart_configure(); + /* send shutdown command */ + avr_uart_send('E'); + + for(;;) /* Spin until power-off happens */ + avr_uart_send('G'); /* "kick" */ + /* NOTREACHED */ +} + +static void linkstation_halt(void) +{ + linkstation_power_off(); + /* NOTREACHED */ +} + +static void linkstation_show_cpuinfo(struct seq_file *m) +{ + seq_printf(m, "vendor\t\t: Buffalo Technology\n"); + seq_printf(m, "machine\t\t: Linkstation I/Kurobox(HG)\n"); +} + +static int __init linkstation_probe(void) +{ + unsigned long root; + + root = of_get_flat_dt_root(); + + if (!of_flat_dt_is_compatible(root, "linkstation")) + return 0; + return 1; +} + +define_machine(linkstation){ + .name = "Buffalo Linkstation", + .probe = linkstation_probe, + .setup_arch = linkstation_setup_arch, + .init_IRQ = linkstation_init_IRQ, + .show_cpuinfo = linkstation_show_cpuinfo, + .get_irq = mpic_get_irq, + .restart = linkstation_restart, + .power_off = linkstation_power_off, + .halt = linkstation_halt, + .calibrate_decr = generic_calibrate_decr, +}; -- cgit v1.2.3