From ada3ea6fcde45abc55e2af0e564455fd7f943a79 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 16 Aug 2007 23:44:00 -0500 Subject: [POWERPC] Add interrupt resource for RTC CMOS driver The RTC CMOS driver expects the interrupt to be a resource of the platform device. Use a fixed interrupt value of 8 since on PPC if we are using this its off an i8259 which we ensure has interrupt numbers 0..15. Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/rtc_cmos_setup.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/sysdev/rtc_cmos_setup.c b/arch/powerpc/sysdev/rtc_cmos_setup.c index e276048b8c5..0c9ac7ee08f 100644 --- a/arch/powerpc/sysdev/rtc_cmos_setup.c +++ b/arch/powerpc/sysdev/rtc_cmos_setup.c @@ -20,14 +20,16 @@ static int __init add_rtc(void) { struct device_node *np; struct platform_device *pd; - struct resource res; + struct resource res[2]; int ret; + memset(&res, 0, sizeof(res)); + np = of_find_compatible_node(NULL, NULL, "pnpPNP,b00"); if (!np) return -ENODEV; - ret = of_address_to_resource(np, 0, &res); + ret = of_address_to_resource(np, 0, &res[0]); of_node_put(np); if (ret) return ret; @@ -36,11 +38,18 @@ static int __init add_rtc(void) * RTC_PORT(x) is hardcoded in asm/mc146818rtc.h. Verify that the * address provided by the device node matches. */ - if (res.start != RTC_PORT(0)) + if (res[0].start != RTC_PORT(0)) return -EINVAL; + /* Use a fixed interrupt value of 8 since on PPC if we are using this + * its off an i8259 which we ensure has interrupt numbers 0..15. */ + res[1].start = 8; + res[1].end = 8; + res[1].flags = IORESOURCE_IRQ; + pd = platform_device_register_simple("rtc_cmos", -1, - &res, 1); + &res[0], 2); + if (IS_ERR(pd)) return PTR_ERR(pd); -- cgit v1.2.3 From b66510cb9992d204f216049e9c01d432c7635f6c Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 16 Aug 2007 23:55:55 -0500 Subject: [POWERPC] Fix interrupt routing and setup of ULI M1575 on FSL boards The interrupt routing in the device trees for the ULI M1575 was inproperly using the interrupt line field as pci function. Fixed up the device tree's to actual conform for to specification and changed the interrupt mapping code so it just uses a static mapping setup as follows: PIRQA - IRQ9 PIRQB - IRQ10 PIRQC - IRQ11 PIRQD - IRQ12 USB 1.1 OCHI (1c.0) - IRQ12 USB 1.1 OCHI (1c.1) - IRQ9 USB 1.1 OCHI (1c.2) - IRQ10 USB 1.1 ECHI (1c.3) - IRQ11 LAN (1b.0) - IRQ6 AC97 (1d.0) - IRQ6 Modem (1d.1) - IRQ6 HD Audio (1d.2) - IRQ6 SATA (1f.1) - IRQ5 SMB (1e.1) - IRQ7 PMU (1e.2) - IRQ7 PATA (1f.0) - IRQ14/15 Took the oppurtunity to refactor the code into a single file so we don't have to duplicate these fixes on the two current boards in the tree and several forth coming boards that will also need the code. Fixed RTC support that requires a dummy memory read on the P2P bridge to unlock the RTC and setup the default of the RTC alarm registers to match with a basic x86 style CMOS RTC. Moved code that poked ISA registers to a FIXUP_FINAL quirk to ensure the PCI IO space has been setup properly before we start poking ISA registers at random locations. Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8544ds.dts | 88 +++++----- arch/powerpc/boot/dts/mpc8641_hpcn.dts | 114 +++---------- arch/powerpc/platforms/85xx/Kconfig | 1 + arch/powerpc/platforms/85xx/mpc8544_ds.c | 214 ++---------------------- arch/powerpc/platforms/86xx/Kconfig | 1 + arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 224 ++----------------------- arch/powerpc/platforms/Kconfig | 8 + arch/powerpc/platforms/Makefile | 3 + arch/powerpc/platforms/fsl_uli1575.c | 255 +++++++++++++++++++++++++++++ 9 files changed, 363 insertions(+), 545 deletions(-) create mode 100644 arch/powerpc/platforms/fsl_uli1575.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts index 4680e201088..3e79bf0a315 100644 --- a/arch/powerpc/boot/dts/mpc8544ds.dts +++ b/arch/powerpc/boot/dts/mpc8544ds.dts @@ -44,8 +44,18 @@ #size-cells = <1>; #interrupt-cells = <2>; device_type = "soc"; - ranges = <0 e0000000 00100000>; - reg = ; // CCSRBAR 1M + + + ranges = <00001000 e0001000 000ff000 + 80000000 80000000 20000000 + a0000000 a0000000 10000000 + b0000000 b0000000 00100000 + c0000000 c0000000 20000000 + b0100000 b0100000 00100000 + e1000000 e1000000 00010000 + e1010000 e1010000 00010000 + e1020000 e1020000 00010000>; + reg = ; // CCSRBAR 1M bus-frequency = <0>; // Filled out by uboot. memory-controller@2000 { @@ -161,8 +171,8 @@ interrupt-parent = <&mpic>; interrupts = <18 2>; bus-range = <0 ff>; - ranges = <02000000 0 80000000 80000000 0 10000000 - 01000000 0 00000000 e2000000 0 00800000>; + ranges = <02000000 0 c0000000 c0000000 0 20000000 + 01000000 0 00000000 e1000000 0 00010000>; clock-frequency = <3f940aa>; #interrupt-cells = <1>; #size-cells = <2>; @@ -178,8 +188,8 @@ #address-cells = <3>; reg = <9000 1000>; bus-range = <0 ff>; - ranges = <02000000 0 90000000 90000000 0 10000000 - 01000000 0 00000000 e3000000 0 00800000>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e1010000 0 00010000>; clock-frequency = <1fca055>; interrupt-parent = <&mpic>; interrupts = <1a 2>; @@ -202,7 +212,7 @@ reg = ; bus-range = <0 ff>; ranges = <02000000 0 a0000000 a0000000 0 10000000 - 01000000 0 00000000 e2800000 0 00800000>; + 01000000 0 00000000 e1020000 0 00010000>; clock-frequency = <1fca055>; interrupt-parent = <&mpic>; interrupts = <19 2>; @@ -224,49 +234,29 @@ #address-cells = <3>; reg = ; bus-range = <0 ff>; - ranges = <02000000 0 b0000000 b0000000 0 10000000 - 01000000 0 00000000 e3800000 0 00800000>; + ranges = <02000000 0 b0000000 b0000000 0 00100000 + 01000000 0 00000000 b0100000 0 00100000>; clock-frequency = <1fca055>; interrupt-parent = <&mpic>; interrupts = <1b 2>; - interrupt-map-mask = ; + interrupt-map-mask = ; interrupt-map = < - - // IDSEL 0x1a - d000 0 0 1 &i8259 6 2 - d000 0 0 2 &i8259 3 2 - d000 0 0 3 &i8259 4 2 - d000 0 0 4 &i8259 5 2 - - // IDSEL 0x1b - d800 0 0 1 &i8259 5 2 - d800 0 0 2 &i8259 0 0 - d800 0 0 3 &i8259 0 0 - d800 0 0 4 &i8259 0 0 - // IDSEL 0x1c USB - e000 0 0 1 &i8259 9 2 - e000 0 0 2 &i8259 a 2 - e000 0 0 3 &i8259 c 2 - e000 0 0 4 &i8259 7 2 + e000 0 0 0 &i8259 c 2 + e100 0 0 0 &i8259 9 2 + e200 0 0 0 &i8259 a 2 + e300 0 0 0 &i8259 b 2 // IDSEL 0x1d Audio - e800 0 0 1 &i8259 9 2 - e800 0 0 2 &i8259 a 2 - e800 0 0 3 &i8259 b 2 - e800 0 0 4 &i8259 0 0 + e800 0 0 0 &i8259 6 2 // IDSEL 0x1e Legacy - f000 0 0 1 &i8259 c 2 - f000 0 0 2 &i8259 0 0 - f000 0 0 3 &i8259 0 0 - f000 0 0 4 &i8259 0 0 + f000 0 0 0 &i8259 7 2 + f100 0 0 0 &i8259 7 2 // IDSEL 0x1f IDE/SATA - f800 0 0 1 &i8259 6 2 - f800 0 0 2 &i8259 0 0 - f800 0 0 3 &i8259 0 0 - f800 0 0 4 &i8259 0 0 + f800 0 0 0 &i8259 e 2 + f900 0 0 0 &i8259 5 2 >; uli1575@0 { reg = <0 0 0 0 0>; @@ -274,10 +264,10 @@ #address-cells = <3>; ranges = <02000000 0 b0000000 02000000 0 b0000000 - 0 10000000 + 0 00100000 01000000 0 00000000 01000000 0 00000000 - 0 00080000>; + 0 00100000>; pci_bridge@0 { reg = <0 0 0 0 0>; @@ -285,10 +275,10 @@ #address-cells = <3>; ranges = <02000000 0 b0000000 02000000 0 b0000000 - 0 20000000 + 0 00100000 01000000 0 00000000 01000000 0 00000000 - 0 00100000>; + 0 00100000>; isa@1e { device_type = "isa"; @@ -296,7 +286,8 @@ #size-cells = <1>; #address-cells = <2>; reg = ; - ranges = <1 0 01000000 0 0 + ranges = <1 0 + 01000000 0 0 00001000>; interrupt-parent = <&i8259>; @@ -312,8 +303,7 @@ built-in; compatible = "chrp,iic"; interrupts = <9 2>; - interrupt-parent = - <&mpic>; + interrupt-parent = <&mpic>; }; i8042@60 { @@ -321,8 +311,7 @@ #address-cells = <1>; reg = <1 60 1 1 64 1>; interrupts = <1 3 c 3>; - interrupt-parent = - <&i8259>; + interrupt-parent = <&i8259>; keyboard@0 { reg = <0>; @@ -336,8 +325,7 @@ }; rtc@70 { - compatible = - "pnpPNP,b00"; + compatible = "pnpPNP,b00"; reg = <1 70 2>; }; diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts index 5d82709cfcb..b0166e5c177 100644 --- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts @@ -224,98 +224,36 @@ clock-frequency = <1fca055>; interrupt-parent = <&mpic>; interrupts = <18 2>; - interrupt-map-mask = ; + interrupt-map-mask = ; interrupt-map = < /* IDSEL 0x11 */ - 8800 0 0 1 &i8259 3 2 - 8800 0 0 2 &i8259 4 2 - 8800 0 0 3 &i8259 5 2 - 8800 0 0 4 &i8259 6 2 + 8800 0 0 1 &i8259 9 2 + 8800 0 0 2 &i8259 a 2 + 8800 0 0 3 &i8259 b 2 + 8800 0 0 4 &i8259 c 2 /* IDSEL 0x12 */ - 9000 0 0 1 &i8259 4 2 - 9000 0 0 2 &i8259 5 2 - 9000 0 0 3 &i8259 6 2 - 9000 0 0 4 &i8259 3 2 - - /* IDSEL 0x13 */ - 9800 0 0 1 &i8259 0 0 - 9800 0 0 2 &i8259 0 0 - 9800 0 0 3 &i8259 0 0 - 9800 0 0 4 &i8259 0 0 - - /* IDSEL 0x14 */ - a000 0 0 1 &i8259 0 0 - a000 0 0 2 &i8259 0 0 - a000 0 0 3 &i8259 0 0 - a000 0 0 4 &i8259 0 0 - - /* IDSEL 0x15 */ - a800 0 0 1 &i8259 0 0 - a800 0 0 2 &i8259 0 0 - a800 0 0 3 &i8259 0 0 - a800 0 0 4 &i8259 0 0 - - /* IDSEL 0x16 */ - b000 0 0 1 &i8259 0 0 - b000 0 0 2 &i8259 0 0 - b000 0 0 3 &i8259 0 0 - b000 0 0 4 &i8259 0 0 - - /* IDSEL 0x17 */ - b800 0 0 1 &i8259 0 0 - b800 0 0 2 &i8259 0 0 - b800 0 0 3 &i8259 0 0 - b800 0 0 4 &i8259 0 0 - - /* IDSEL 0x18 */ - c000 0 0 1 &i8259 0 0 - c000 0 0 2 &i8259 0 0 - c000 0 0 3 &i8259 0 0 - c000 0 0 4 &i8259 0 0 - - /* IDSEL 0x19 */ - c800 0 0 1 &i8259 0 0 - c800 0 0 2 &i8259 0 0 - c800 0 0 3 &i8259 0 0 - c800 0 0 4 &i8259 0 0 - - /* IDSEL 0x1a */ - d000 0 0 1 &i8259 6 2 - d000 0 0 2 &i8259 3 2 - d000 0 0 3 &i8259 4 2 - d000 0 0 4 &i8259 5 2 - - - /* IDSEL 0x1b */ - d800 0 0 1 &i8259 5 2 - d800 0 0 2 &i8259 0 0 - d800 0 0 3 &i8259 0 0 - d800 0 0 4 &i8259 0 0 - - /* IDSEL 0x1c */ - e000 0 0 1 &i8259 9 2 - e000 0 0 2 &i8259 a 2 - e000 0 0 3 &i8259 c 2 - e000 0 0 4 &i8259 7 2 - - /* IDSEL 0x1d */ - e800 0 0 1 &i8259 9 2 - e800 0 0 2 &i8259 a 2 - e800 0 0 3 &i8259 b 2 - e800 0 0 4 &i8259 0 0 - - /* IDSEL 0x1e */ - f000 0 0 1 &i8259 c 2 - f000 0 0 2 &i8259 0 0 - f000 0 0 3 &i8259 0 0 - f000 0 0 4 &i8259 0 0 - - /* IDSEL 0x1f */ - f800 0 0 1 &i8259 6 2 - f800 0 0 2 &i8259 0 0 - f800 0 0 3 &i8259 0 0 - f800 0 0 4 &i8259 0 0 + 9000 0 0 1 &i8259 a 2 + 9000 0 0 2 &i8259 b 2 + 9000 0 0 3 &i8259 c 2 + 9000 0 0 4 &i8259 9 2 + + // IDSEL 0x1c USB + e000 0 0 0 &i8259 c 2 + e100 0 0 0 &i8259 9 2 + e200 0 0 0 &i8259 a 2 + e300 0 0 0 &i8259 b 2 + + // IDSEL 0x1d Audio + e800 0 0 0 &i8259 6 2 + + // IDSEL 0x1e Legacy + f000 0 0 0 &i8259 7 2 + f100 0 0 0 &i8259 7 2 + + // IDSEL 0x1f IDE/SATA + f800 0 0 0 &i8259 e 2 + f900 0 0 0 &i8259 5 2 >; uli1575@0 { reg = <0 0 0 0 0>; diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index f58184086c8..f620171ad6b 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -33,6 +33,7 @@ config MPC8544_DS bool "Freescale MPC8544 DS" select PPC_I8259 select DEFAULT_UIMAGE + select FSL_ULI1575 help This option enables support for the MPC8544 DS board diff --git a/arch/powerpc/platforms/85xx/mpc8544_ds.c b/arch/powerpc/platforms/85xx/mpc8544_ds.c index 4905f6f8903..0f834d8be44 100644 --- a/arch/powerpc/platforms/85xx/mpc8544_ds.c +++ b/arch/powerpc/platforms/85xx/mpc8544_ds.c @@ -114,211 +114,25 @@ void __init mpc8544_ds_pic_init(void) } #ifdef CONFIG_PCI -enum pirq { PIRQA = 8, PIRQB, PIRQC, PIRQD, PIRQE, PIRQF, PIRQG, PIRQH }; +extern int uses_fsl_uli_m1575; +extern int uli_exclude_device(struct pci_controller *hose, + u_char bus, u_char devfn); -/* - * Value in table -- IRQ number - */ -const unsigned char uli1575_irq_route_table[16] = { - 0, /* 0: Reserved */ - 0x8, - 0, /* 2: Reserved */ - 0x2, - 0x4, - 0x5, - 0x7, - 0x6, - 0, /* 8: Reserved */ - 0x1, - 0x3, - 0x9, - 0xb, - 0, /* 13: Reserved */ - 0xd, - 0xf, -}; - -static int __devinit -get_pci_irq_from_of(struct pci_controller *hose, int slot, int pin) -{ - struct of_irq oirq; - u32 laddr[3]; - struct device_node *hosenode = hose ? hose->arch_data : NULL; - - if (!hosenode) - return -EINVAL; - - laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(slot, 0) << 8); - laddr[1] = laddr[2] = 0; - of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq); - DBG("mpc8544_ds: pci irq addr %x, slot %d, pin %d, irq %d\n", - laddr[0], slot, pin, oirq.specifier[0]); - return oirq.specifier[0]; -} - -/*8259*/ -static void __devinit quirk_uli1575(struct pci_dev *dev) -{ - unsigned short temp; - struct pci_controller *hose = pci_bus_to_host(dev->bus); - unsigned char irq2pin[16]; - unsigned long pirq_map_word = 0; - u32 irq; - int i; - - /* - * ULI1575 interrupts route setup - */ - memset(irq2pin, 0, 16); /* Initialize default value 0 */ - - irq2pin[6]=PIRQA+3; /* enabled mapping for IRQ6 to PIRQD, used by SATA */ - - /* - * PIRQE -> PIRQF mapping set manually - * - * IRQ pin IRQ# - * PIRQE ---- 9 - * PIRQF ---- 10 - * PIRQG ---- 11 - * PIRQH ---- 12 - */ - for (i = 0; i < 4; i++) - irq2pin[i + 9] = PIRQE + i; - - /* Set IRQ-PIRQ Mapping to ULI1575 */ - for (i = 0; i < 16; i++) - if (irq2pin[i]) - pirq_map_word |= (uli1575_irq_route_table[i] & 0xf) - << ((irq2pin[i] - PIRQA) * 4); - - pirq_map_word |= 1<<26; /* disable INTx in EP mode*/ - - /* ULI1575 IRQ mapping conf register default value is 0xb9317542 */ - DBG("Setup ULI1575 IRQ mapping configuration register value = 0x%x\n", - (int)pirq_map_word); - pci_write_config_dword(dev, 0x48, pirq_map_word); - -#define ULI1575_SET_DEV_IRQ(slot, pin, reg) \ - do { \ - int irq; \ - irq = get_pci_irq_from_of(hose, slot, pin); \ - if (irq > 0 && irq < 16) \ - pci_write_config_byte(dev, reg, irq2pin[irq]); \ - else \ - printk(KERN_WARNING "ULI1575 device" \ - "(slot %d, pin %d) irq %d is invalid.\n", \ - slot, pin, irq); \ - } while(0) - - /* USB 1.1 OHCI controller 1, slot 28, pin 1 */ - ULI1575_SET_DEV_IRQ(28, 1, 0x86); - - /* USB 1.1 OHCI controller 2, slot 28, pin 2 */ - ULI1575_SET_DEV_IRQ(28, 2, 0x87); - - /* USB 1.1 OHCI controller 3, slot 28, pin 3 */ - ULI1575_SET_DEV_IRQ(28, 3, 0x88); - - /* USB 2.0 controller, slot 28, pin 4 */ - irq = get_pci_irq_from_of(hose, 28, 4); - if (irq >= 0 && irq <= 15) - pci_write_config_dword(dev, 0x74, uli1575_irq_route_table[irq]); - - /* Audio controller, slot 29, pin 1 */ - ULI1575_SET_DEV_IRQ(29, 1, 0x8a); - - /* Modem controller, slot 29, pin 2 */ - ULI1575_SET_DEV_IRQ(29, 2, 0x8b); - - /* HD audio controller, slot 29, pin 3 */ - ULI1575_SET_DEV_IRQ(29, 3, 0x8c); - - /* SMB interrupt: slot 30, pin 1 */ - ULI1575_SET_DEV_IRQ(30, 1, 0x8e); - - /* PMU ACPI SCI interrupt: slot 30, pin 2 */ - ULI1575_SET_DEV_IRQ(30, 2, 0x8f); - - /* Serial ATA interrupt: slot 31, pin 1 */ - ULI1575_SET_DEV_IRQ(31, 1, 0x8d); - - /* Primary PATA IDE IRQ: 14 - * Secondary PATA IDE IRQ: 15 - */ - pci_write_config_byte(dev, 0x44, 0x30 | uli1575_irq_route_table[14]); - pci_write_config_byte(dev, 0x75, uli1575_irq_route_table[15]); - - /* Set IRQ14 and IRQ15 to legacy IRQs */ - pci_read_config_word(dev, 0x46, &temp); - temp |= 0xc000; - pci_write_config_word(dev, 0x46, temp); - - /* Set i8259 interrupt trigger - * IRQ 3: Level - * IRQ 4: Level - * IRQ 5: Level - * IRQ 6: Level - * IRQ 7: Level - * IRQ 9: Level - * IRQ 10: Level - * IRQ 11: Level - * IRQ 12: Level - * IRQ 14: Edge - * IRQ 15: Edge - */ - outb(0xfa, 0x4d0); - outb(0x1e, 0x4d1); - -#undef ULI1575_SET_DEV_IRQ -} - -/* SATA */ -static void __devinit quirk_uli5288(struct pci_dev *dev) +static int mpc85xx_exclude_device(struct pci_controller *hose, + u_char bus, u_char devfn) { - unsigned char c; - - pci_read_config_byte(dev, 0x83, &c); - c |= 0x80; /* read/write lock */ - pci_write_config_byte(dev, 0x83, c); - - pci_write_config_byte(dev, 0x09, 0x01); /* Base class code: storage */ - pci_write_config_byte(dev, 0x0a, 0x06); /* IDE disk */ + struct device_node* node; + struct resource rsrc; - pci_read_config_byte(dev, 0x83, &c); - c &= 0x7f; - pci_write_config_byte(dev, 0x83, c); - - pci_read_config_byte(dev, 0x84, &c); - c |= 0x01; /* emulated PATA mode enabled */ - pci_write_config_byte(dev, 0x84, c); -} + node = (struct device_node *)hose->arch_data; + of_address_to_resource(node, 0, &rsrc); -/* PATA */ -static void __devinit quirk_uli5229(struct pci_dev *dev) -{ - unsigned short temp; - pci_write_config_word(dev, 0x04, 0x0405); /* MEM IO MSI */ - pci_read_config_word(dev, 0x4a, &temp); - temp |= 0x1000; /* Enable Native IRQ 14/15 */ - pci_write_config_word(dev, 0x4a, temp); -} + if ((rsrc.start & 0xfffff) == 0xb000) { + return uli_exclude_device(hose, bus, devfn); + } -/*Bridge*/ -static void __devinit early_uli5249(struct pci_dev *dev) -{ - unsigned char temp; - pci_write_config_word(dev, 0x04, 0x0007); /* mem access */ - pci_read_config_byte(dev, 0x7c, &temp); - pci_write_config_byte(dev, 0x7c, 0x80); /* R/W lock control */ - pci_write_config_byte(dev, 0x09, 0x01); /* set as pci-pci bridge */ - pci_write_config_byte(dev, 0x7c, temp); /* restore pci bus debug control */ - dev->class |= 0x1; + return PCIBIOS_SUCCESSFUL; } - -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229); -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249); #endif /* CONFIG_PCI */ /* @@ -342,6 +156,8 @@ static void __init mpc8544_ds_setup_arch(void) else fsl_add_bridge(np, 0); } + uses_fsl_uli_m1575 = 1; + ppc_md.pci_exclude_device = mpc85xx_exclude_device; #endif printk("MPC8544 DS board from Freescale Semiconductor\n"); diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig index 343b76d0d79..685b2fbbbe0 100644 --- a/arch/powerpc/platforms/86xx/Kconfig +++ b/arch/powerpc/platforms/86xx/Kconfig @@ -7,6 +7,7 @@ config MPC8641_HPCN bool "Freescale MPC8641 HPCN" select PPC_I8259 select DEFAULT_UIMAGE + select FSL_ULI1575 help This option enables support for the MPC8641 HPCN board. diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c index e9eaa0749ae..56b27caf7a2 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c @@ -107,220 +107,25 @@ mpc86xx_hpcn_init_irq(void) } #ifdef CONFIG_PCI +extern int uses_fsl_uli_m1575; +extern int uli_exclude_device(struct pci_controller *hose, + u_char bus, u_char devfn); -enum pirq{PIRQA = 8, PIRQB, PIRQC, PIRQD, PIRQE, PIRQF, PIRQG, PIRQH}; -const unsigned char uli1575_irq_route_table[16] = { - 0, /* 0: Reserved */ - 0x8, /* 1: 0b1000 */ - 0, /* 2: Reserved */ - 0x2, /* 3: 0b0010 */ - 0x4, /* 4: 0b0100 */ - 0x5, /* 5: 0b0101 */ - 0x7, /* 6: 0b0111 */ - 0x6, /* 7: 0b0110 */ - 0, /* 8: Reserved */ - 0x1, /* 9: 0b0001 */ - 0x3, /* 10: 0b0011 */ - 0x9, /* 11: 0b1001 */ - 0xb, /* 12: 0b1011 */ - 0, /* 13: Reserved */ - 0xd, /* 14, 0b1101 */ - 0xf, /* 15, 0b1111 */ -}; - -static int __devinit -get_pci_irq_from_of(struct pci_controller *hose, int slot, int pin) -{ - struct of_irq oirq; - u32 laddr[3]; - struct device_node *hosenode = hose ? hose->arch_data : NULL; - - if (!hosenode) return -EINVAL; - - laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(slot, 0) << 8); - laddr[1] = laddr[2] = 0; - of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq); - DBG("mpc86xx_hpcn: pci irq addr %x, slot %d, pin %d, irq %d\n", - laddr[0], slot, pin, oirq.specifier[0]); - return oirq.specifier[0]; -} - -static void __devinit quirk_uli1575(struct pci_dev *dev) -{ - unsigned short temp; - struct pci_controller *hose = pci_bus_to_host(dev->bus); - unsigned char irq2pin[16], c; - unsigned long pirq_map_word = 0; - u32 irq; - int i; - - /* - * ULI1575 interrupts route setup - */ - memset(irq2pin, 0, 16); /* Initialize default value 0 */ - - /* - * PIRQA -> PIRQD mapping read from OF-tree - * - * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD - * PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA - */ - for (i = 0; i < 4; i++){ - irq = get_pci_irq_from_of(hose, 17, i + 1); - if (irq > 0 && irq < 16) - irq2pin[irq] = PIRQA + i; - else - printk(KERN_WARNING "ULI1575 device" - "(slot %d, pin %d) irq %d is invalid.\n", - 17, i, irq); - } - - /* - * PIRQE -> PIRQF mapping set manually - * - * IRQ pin IRQ# - * PIRQE ---- 9 - * PIRQF ---- 10 - * PIRQG ---- 11 - * PIRQH ---- 12 - */ - for (i = 0; i < 4; i++) irq2pin[i + 9] = PIRQE + i; - - /* Set IRQ-PIRQ Mapping to ULI1575 */ - for (i = 0; i < 16; i++) - if (irq2pin[i]) - pirq_map_word |= (uli1575_irq_route_table[i] & 0xf) - << ((irq2pin[i] - PIRQA) * 4); - - /* ULI1575 IRQ mapping conf register default value is 0xb9317542 */ - DBG("Setup ULI1575 IRQ mapping configuration register value = 0x%x\n", - pirq_map_word); - pci_write_config_dword(dev, 0x48, pirq_map_word); - -#define ULI1575_SET_DEV_IRQ(slot, pin, reg) \ - do { \ - int irq; \ - irq = get_pci_irq_from_of(hose, slot, pin); \ - if (irq > 0 && irq < 16) \ - pci_write_config_byte(dev, reg, irq2pin[irq]); \ - else \ - printk(KERN_WARNING "ULI1575 device" \ - "(slot %d, pin %d) irq %d is invalid.\n", \ - slot, pin, irq); \ - } while(0) - - /* USB 1.1 OHCI controller 1, slot 28, pin 1 */ - ULI1575_SET_DEV_IRQ(28, 1, 0x86); - - /* USB 1.1 OHCI controller 2, slot 28, pin 2 */ - ULI1575_SET_DEV_IRQ(28, 2, 0x87); - - /* USB 1.1 OHCI controller 3, slot 28, pin 3 */ - ULI1575_SET_DEV_IRQ(28, 3, 0x88); - - /* USB 2.0 controller, slot 28, pin 4 */ - irq = get_pci_irq_from_of(hose, 28, 4); - if (irq >= 0 && irq <=15) - pci_write_config_dword(dev, 0x74, uli1575_irq_route_table[irq]); - - /* Audio controller, slot 29, pin 1 */ - ULI1575_SET_DEV_IRQ(29, 1, 0x8a); - - /* Modem controller, slot 29, pin 2 */ - ULI1575_SET_DEV_IRQ(29, 2, 0x8b); - - /* HD audio controller, slot 29, pin 3 */ - ULI1575_SET_DEV_IRQ(29, 3, 0x8c); - - /* SMB interrupt: slot 30, pin 1 */ - ULI1575_SET_DEV_IRQ(30, 1, 0x8e); - - /* PMU ACPI SCI interrupt: slot 30, pin 2 */ - ULI1575_SET_DEV_IRQ(30, 2, 0x8f); - - /* Serial ATA interrupt: slot 31, pin 1 */ - ULI1575_SET_DEV_IRQ(31, 1, 0x8d); - - /* Primary PATA IDE IRQ: 14 - * Secondary PATA IDE IRQ: 15 - */ - pci_write_config_byte(dev, 0x44, 0x30 | uli1575_irq_route_table[14]); - pci_write_config_byte(dev, 0x75, uli1575_irq_route_table[15]); - - /* Set IRQ14 and IRQ15 to legacy IRQs */ - pci_read_config_word(dev, 0x46, &temp); - temp |= 0xc000; - pci_write_config_word(dev, 0x46, temp); - - /* Set i8259 interrupt trigger - * IRQ 3: Level - * IRQ 4: Level - * IRQ 5: Level - * IRQ 6: Level - * IRQ 7: Level - * IRQ 9: Level - * IRQ 10: Level - * IRQ 11: Level - * IRQ 12: Level - * IRQ 14: Edge - * IRQ 15: Edge - */ - outb(0xfa, 0x4d0); - outb(0x1e, 0x4d1); - -#undef ULI1575_SET_DEV_IRQ - - /* Disable the HD interface and enable the AC97 interface. */ - pci_read_config_byte(dev, 0xb8, &c); - c &= 0x7f; - pci_write_config_byte(dev, 0xb8, c); -} - -static void __devinit quirk_uli5288(struct pci_dev *dev) +static int mpc86xx_exclude_device(struct pci_controller *hose, + u_char bus, u_char devfn) { - unsigned char c; + struct device_node* node; + struct resource rsrc; - pci_read_config_byte(dev,0x83,&c); - c |= 0x80; - pci_write_config_byte(dev, 0x83, c); + node = (struct device_node *)hose->arch_data; + of_address_to_resource(node, 0, &rsrc); - pci_write_config_byte(dev, 0x09, 0x01); - pci_write_config_byte(dev, 0x0a, 0x06); - - pci_read_config_byte(dev,0x83,&c); - c &= 0x7f; - pci_write_config_byte(dev, 0x83, c); - - pci_read_config_byte(dev,0x84,&c); - c |= 0x01; - pci_write_config_byte(dev, 0x84, c); -} - -static void __devinit quirk_uli5229(struct pci_dev *dev) -{ - unsigned short temp; - pci_write_config_word(dev, 0x04, 0x0405); - dev->class &= ~0x5; - pci_read_config_word(dev, 0x4a, &temp); - temp |= 0x1000; - pci_write_config_word(dev, 0x4a, temp); -} + if ((rsrc.start & 0xfffff) == 0x8000) { + return uli_exclude_device(hose, bus, devfn); + } -static void __devinit early_uli5249(struct pci_dev *dev) -{ - unsigned char temp; - pci_write_config_word(dev, 0x04, 0x0007); - pci_read_config_byte(dev, 0x7c, &temp); - pci_write_config_byte(dev, 0x7c, 0x80); - pci_write_config_byte(dev, 0x09, 0x01); - pci_write_config_byte(dev, 0x7c, temp); - dev->class |= 0x1; + return PCIBIOS_SUCCESSFUL; } - -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229); -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249); #endif /* CONFIG_PCI */ @@ -353,6 +158,9 @@ mpc86xx_hpcn_setup_arch(void) else fsl_add_bridge(np, 0); } + uses_fsl_uli_m1575 = 1; + ppc_md.pci_exclude_device = mpc86xx_exclude_device; + #endif printk("MPC86xx HPCN board from Freescale Semiconductor\n"); diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 932538a93c2..cfc24974159 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -282,4 +282,12 @@ config AXON_RAM minor numbers are available in /proc/devices, /proc/partitions or in /sys/block/axonram?/dev. +config FSL_ULI1575 + bool + default n + help + Supports for the ULI1575 PCIe south bridge that exists on some + Freescale reference boards. The boards all use the ULI in pretty + much the same way. + endmenu diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile index d6e041a46d2..d44e832b01f 100644 --- a/arch/powerpc/platforms/Makefile +++ b/arch/powerpc/platforms/Makefile @@ -1,3 +1,6 @@ + +obj-$(CONFIG_FSL_ULI1575) += fsl_uli1575.o + ifeq ($(CONFIG_PPC_MERGE),y) obj-$(CONFIG_PPC_PMAC) += powermac/ else diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c new file mode 100644 index 00000000000..afc9141be63 --- /dev/null +++ b/arch/powerpc/platforms/fsl_uli1575.c @@ -0,0 +1,255 @@ +/* + * ULI M1575 setup code - specific to Freescale boards + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include + +#include +#include + +#define ULI_PIRQA 0x08 +#define ULI_PIRQB 0x09 +#define ULI_PIRQC 0x0a +#define ULI_PIRQD 0x0b +#define ULI_PIRQE 0x0c +#define ULI_PIRQF 0x0d +#define ULI_PIRQG 0x0e + +#define ULI_8259_NONE 0x00 +#define ULI_8259_IRQ1 0x08 +#define ULI_8259_IRQ3 0x02 +#define ULI_8259_IRQ4 0x04 +#define ULI_8259_IRQ5 0x05 +#define ULI_8259_IRQ6 0x07 +#define ULI_8259_IRQ7 0x06 +#define ULI_8259_IRQ9 0x01 +#define ULI_8259_IRQ10 0x03 +#define ULI_8259_IRQ11 0x09 +#define ULI_8259_IRQ12 0x0b +#define ULI_8259_IRQ14 0x0d +#define ULI_8259_IRQ15 0x0f + +u8 uli_pirq_to_irq[8] = { + ULI_8259_IRQ9, /* PIRQA */ + ULI_8259_IRQ10, /* PIRQB */ + ULI_8259_IRQ11, /* PIRQC */ + ULI_8259_IRQ12, /* PIRQD */ + ULI_8259_IRQ5, /* PIRQE */ + ULI_8259_IRQ6, /* PIRQF */ + ULI_8259_IRQ7, /* PIRQG */ + ULI_8259_NONE, /* PIRQH */ +}; + +/* set in board code if you want this quirks to do something */ +int uses_fsl_uli_m1575; + +/* Bridge */ +static void __devinit early_uli5249(struct pci_dev *dev) +{ + unsigned char temp; + + if (!uses_fsl_uli_m1575) + return; + + pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_IO | + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + + /* read/write lock */ + pci_read_config_byte(dev, 0x7c, &temp); + pci_write_config_byte(dev, 0x7c, 0x80); + + /* set as P2P bridge */ + pci_write_config_byte(dev, PCI_CLASS_PROG, 0x01); + dev->class |= 0x1; + + /* restore lock */ + pci_write_config_byte(dev, 0x7c, temp); +} + + +static void __devinit quirk_uli1575(struct pci_dev *dev) +{ + int i; + + if (!uses_fsl_uli_m1575) + return; + + /* + * ULI1575 interrupts route setup + */ + + /* ULI1575 IRQ mapping conf register maps PIRQx to IRQn */ + for (i = 0; i < 4; i++) { + u8 val = uli_pirq_to_irq[i*2] | (uli_pirq_to_irq[i*2+1] << 4); + pci_write_config_byte(dev, 0x48 + i, val); + } + + /* USB 1.1 OHCI controller 1: dev 28, func 0 - IRQ12 */ + pci_write_config_byte(dev, 0x86, ULI_PIRQD); + + /* USB 1.1 OHCI controller 2: dev 28, func 1 - IRQ9 */ + pci_write_config_byte(dev, 0x87, ULI_PIRQA); + + /* USB 1.1 OHCI controller 3: dev 28, func 2 - IRQ10 */ + pci_write_config_byte(dev, 0x88, ULI_PIRQB); + + /* Lan controller: dev 27, func 0 - IRQ6 */ + pci_write_config_byte(dev, 0x89, ULI_PIRQF); + + /* AC97 Audio controller: dev 29, func 0 - IRQ6 */ + pci_write_config_byte(dev, 0x8a, ULI_PIRQF); + + /* Modem controller: dev 29, func 1 - IRQ6 */ + pci_write_config_byte(dev, 0x8b, ULI_PIRQF); + + /* HD Audio controller: dev 29, func 2 - IRQ6 */ + pci_write_config_byte(dev, 0x8c, ULI_PIRQF); + + /* SATA controller: dev 31, func 1 - IRQ5 */ + pci_write_config_byte(dev, 0x8d, ULI_PIRQE); + + /* SMB interrupt: dev 30, func 1 - IRQ7 */ + pci_write_config_byte(dev, 0x8e, ULI_PIRQG); + + /* PMU ACPI SCI interrupt: dev 30, func 2 - IRQ7 */ + pci_write_config_byte(dev, 0x8f, ULI_PIRQG); + + /* USB 2.0 controller: dev 28, func 3 */ + pci_write_config_byte(dev, 0x74, ULI_8259_IRQ11); + + /* Primary PATA IDE IRQ: 14 + * Secondary PATA IDE IRQ: 15 + */ + pci_write_config_byte(dev, 0x44, 0x30 | ULI_8259_IRQ14); + pci_write_config_byte(dev, 0x75, ULI_8259_IRQ15); +} + +static void __devinit quirk_final_uli1575(struct pci_dev *dev) +{ + /* Set i8259 interrupt trigger + * IRQ 3: Level + * IRQ 4: Level + * IRQ 5: Level + * IRQ 6: Level + * IRQ 7: Level + * IRQ 9: Level + * IRQ 10: Level + * IRQ 11: Level + * IRQ 12: Level + * IRQ 14: Edge + * IRQ 15: Edge + */ + if (!uses_fsl_uli_m1575) + return; + + outb(0xfa, 0x4d0); + outb(0x1e, 0x4d1); + + /* setup RTC */ + CMOS_WRITE(RTC_SET, RTC_CONTROL); + CMOS_WRITE(RTC_24H, RTC_CONTROL); + + /* ensure month, date, and week alarm fields are ignored */ + CMOS_WRITE(0, RTC_VALID); + + outb_p(0x7c, 0x72); + outb_p(RTC_ALARM_DONT_CARE, 0x73); + + outb_p(0x7d, 0x72); + outb_p(RTC_ALARM_DONT_CARE, 0x73); +} + +/* SATA */ +static void __devinit quirk_uli5288(struct pci_dev *dev) +{ + unsigned char c; + unsigned int d; + + if (!uses_fsl_uli_m1575) + return; + + /* read/write lock */ + pci_read_config_byte(dev, 0x83, &c); + pci_write_config_byte(dev, 0x83, c|0x80); + + pci_read_config_dword(dev, PCI_CLASS_REVISION, &d); + d = (d & 0xff) | (PCI_CLASS_STORAGE_SATA_AHCI << 8); + pci_write_config_dword(dev, PCI_CLASS_REVISION, d); + + /* restore lock */ + pci_write_config_byte(dev, 0x83, c); + + /* disable emulated PATA mode enabled */ + pci_read_config_byte(dev, 0x84, &c); + pci_write_config_byte(dev, 0x84, c & ~0x01); +} + +/* PATA */ +static void __devinit quirk_uli5229(struct pci_dev *dev) +{ + unsigned short temp; + + if (!uses_fsl_uli_m1575) + return; + + pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE | + PCI_COMMAND_MASTER | PCI_COMMAND_IO); + + /* Enable Native IRQ 14/15 */ + pci_read_config_word(dev, 0x4a, &temp); + pci_write_config_word(dev, 0x4a, temp | 0x1000); +} + +/* We have to do a dummy read on the P2P for the RTC to work, WTF */ +static void __devinit quirk_final_uli5249(struct pci_dev *dev) +{ + int i; + u8 *dummy; + struct pci_bus *bus = dev->bus; + + for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) { + if ((bus->resource[i]) && + (bus->resource[i]->flags & IORESOURCE_MEM)) { + dummy = ioremap(bus->resource[i]->start, 0x4); + if (dummy) { + in_8(dummy); + iounmap(dummy); + } + break; + } + } +} + +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5249, quirk_final_uli5249); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x1575, quirk_final_uli1575); + +int uli_exclude_device(struct pci_controller *hose, + u_char bus, u_char devfn) +{ + if (bus == (hose->first_busno + 2)) { + /* exclude Modem controller */ + if ((PCI_SLOT(devfn) == 29) && (PCI_FUNC(devfn) == 1)) + return PCIBIOS_DEVICE_NOT_FOUND; + + /* exclude HD Audio controller */ + if ((PCI_SLOT(devfn) == 29) && (PCI_FUNC(devfn) == 2)) + return PCIBIOS_DEVICE_NOT_FOUND; + } + + return PCIBIOS_SUCCESSFUL; +} -- cgit v1.2.3 From 86d7a9a9c4775f864e6bc5f5da66ef9ea3715734 Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Thu, 2 Aug 2007 15:37:15 -0500 Subject: [POWERPC] Fix FSL BookE machine check reporting Reserved MCSR bits on FSL BookE parts may have spurious values when mcheck occurs. Mask these off when printing the MCSR to avoid confusion. Also, get rid of the MCSR_GL_CI bit defined for e500 - this bit doesn't actually have any meaning. Signed-off-by: Becky Bruce Signed-off-by: Kumar Gala --- arch/powerpc/kernel/traps.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 2bb1cb91178..d8502e37751 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -299,7 +299,7 @@ static inline int check_io_access(struct pt_regs *regs) #ifndef CONFIG_FSL_BOOKE #define get_mc_reason(regs) ((regs)->dsisr) #else -#define get_mc_reason(regs) (mfspr(SPRN_MCSR)) +#define get_mc_reason(regs) (mfspr(SPRN_MCSR) & MCSR_MASK) #endif #define REASON_FP ESR_FP #define REASON_ILLEGAL (ESR_PIL | ESR_PUO) @@ -414,8 +414,6 @@ void machine_check_exception(struct pt_regs *regs) printk("Data Cache Push Parity Error\n"); if (reason & MCSR_DCPERR) printk("Data Cache Parity Error\n"); - if (reason & MCSR_GL_CI) - printk("Guarded Load or Cache-Inhibited stwcx.\n"); if (reason & MCSR_BUS_IAERR) printk("Bus - Instruction Address Error\n"); if (reason & MCSR_BUS_RAERR) -- cgit v1.2.3 From 0af666fa6cf4bc639fb6170600b5fb0d8b6504b9 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 17 Aug 2007 08:23:06 -0500 Subject: [POWERPC] Fix 8xx compile failure CC arch/powerpc/sysdev/commproc.o arch/powerpc/sysdev/fsl_soc.c: In function fsl_pcmcia_of_init: arch/powerpc/sysdev/fsl_soc.c:1109: error: implicit declaration of function of_platform_device_create Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/fsl_soc.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 727453d3e8b..1cf29c9d440 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3 From 15f6ddc7d9cf96f2ee88897c7164198ed6e45a77 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 21 Aug 2007 19:15:31 -0500 Subject: [POWERPC] Fix PCI Device ID for MPC8544/8533 processors The initial user manuals for MPC8544/8533 had some issues with properly documenting the device IDs for MPC8544/8533. These processors are almost identical and both show up on the reference boards. Fix up the quirks for PCIe support to handle MPC8533/E. Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/fsl_pci.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index 9fb0ce5c717..114c90f8f56 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -251,6 +251,8 @@ DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8568E, quirk_fsl_pcie_transpare DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8568, quirk_fsl_pcie_transparent); DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8567E, quirk_fsl_pcie_transparent); DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8567, quirk_fsl_pcie_transparent); +DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8533E, quirk_fsl_pcie_transparent); +DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8533, quirk_fsl_pcie_transparent); DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8544E, quirk_fsl_pcie_transparent); DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8544, quirk_fsl_pcie_transparent); DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8641, quirk_fsl_pcie_transparent); -- cgit v1.2.3 From dfa70f81a05fa857fb1428ac2a88da84ecd50dd9 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Fri, 17 Aug 2007 13:57:39 +1000 Subject: [POWERPC] pasemi: Another IOMMU bugfix for 64K PAGE_SIZE More fallout from the switch from PAGE_SIZE based IOMMU to the native page size for the driver. By pure luck it happened to work most of the time, since we end up invalidating the wrong entries in the TLB. Signed-off-by: Olof Johansson Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pasemi/iommu.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c index f33b21b9f5d..9014d55c717 100644 --- a/arch/powerpc/platforms/pasemi/iommu.c +++ b/arch/powerpc/platforms/pasemi/iommu.c @@ -93,7 +93,7 @@ static void iobmap_build(struct iommu_table *tbl, long index, pr_debug("iobmap: build at: %lx, %lx, addr: %lx\n", index, npages, uaddr); - bus_addr = (tbl->it_offset + index) << PAGE_SHIFT; + bus_addr = (tbl->it_offset + index) << IOBMAP_PAGE_SHIFT; ip = ((u32 *)tbl->it_base) + index; @@ -118,7 +118,7 @@ static void iobmap_free(struct iommu_table *tbl, long index, pr_debug("iobmap: free at: %lx, %lx\n", index, npages); - bus_addr = (tbl->it_offset + index) << PAGE_SHIFT; + bus_addr = (tbl->it_offset + index) << IOBMAP_PAGE_SHIFT; ip = ((u32 *)tbl->it_base) + index; @@ -137,7 +137,7 @@ static void iommu_table_iobmap_setup(void) iommu_table_iobmap.it_busno = 0; iommu_table_iobmap.it_offset = 0; /* it_size is in number of entries */ - iommu_table_iobmap.it_size = 0x80000000 >> PAGE_SHIFT; + iommu_table_iobmap.it_size = 0x80000000 >> IOBMAP_PAGE_SHIFT; /* Initialize the common IOMMU code */ iommu_table_iobmap.it_base = (unsigned long)iob_l2_base; -- cgit v1.2.3 From fa7f374bbf6d8e5fc7dd281a62498041066aaf43 Mon Sep 17 00:00:00 2001 From: Christian Krafft Date: Thu, 23 Aug 2007 03:01:25 +1000 Subject: [POWERPC] spu_manage: Use newer physical-id attribute Legacy device tree used the reg property for the physical id of an spe. On newer device tree layouts the reg property contains the "correct" value in the reg attribute. So there has been intoduced the "physical-id" on newer devicetree layouts. The id is stored by spu_manage into the spu struct as spe_id. cbe_thermal has been changed to use the spu->spe_id. There's no need for the thermal code to check devicetree attributes for itself. Signed-off-by: Christian Krafft Cc: Jeremy Kerr Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/cbe_thermal.c | 6 +----- arch/powerpc/platforms/cell/spu_manage.c | 2 +- 2 files changed, 2 insertions(+), 6 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/cbe_thermal.c b/arch/powerpc/platforms/cell/cbe_thermal.c index e4132f8f51b..fb5eda48467 100644 --- a/arch/powerpc/platforms/cell/cbe_thermal.c +++ b/arch/powerpc/platforms/cell/cbe_thermal.c @@ -88,17 +88,13 @@ static struct cbe_pmd_regs __iomem *get_pmd_regs(struct sys_device *sysdev) /* returns the value for a given spu in a given register */ static u8 spu_read_register_value(struct sys_device *sysdev, union spe_reg __iomem *reg) { - const unsigned int *id; union spe_reg value; struct spu *spu; - /* getting the id from the reg attribute will not work on future device-tree layouts - * in future we should store the id to the spu struct and use it here */ spu = container_of(sysdev, struct spu, sysdev); - id = of_get_property(spu_devnode(spu), "reg", NULL); value.val = in_be64(®->val); - return value.spe[*id]; + return value.spe[spu->spe_id]; } static ssize_t spu_show_temp(struct sys_device *sysdev, char *buf) diff --git a/arch/powerpc/platforms/cell/spu_manage.c b/arch/powerpc/platforms/cell/spu_manage.c index 5eb88346181..7c0668a9dcc 100644 --- a/arch/powerpc/platforms/cell/spu_manage.c +++ b/arch/powerpc/platforms/cell/spu_manage.c @@ -48,7 +48,7 @@ static u64 __init find_spu_unit_number(struct device_node *spe) { const unsigned int *prop; int proplen; - prop = of_get_property(spe, "unit-id", &proplen); + prop = of_get_property(spe, "physical-id", &proplen); if (proplen == 4) return (u64)*prop; -- cgit v1.2.3 From 3addf55c9415f9da039947b33d064332137e49fe Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 23 Aug 2007 03:01:26 +1000 Subject: [POWERPC] cell: Support pinhole-reset on IBM cell blades The Cell Broadband Engine has a method of injecting a system-reset-exception from an external source into the operating system, which should trigger the regular behaviour of entering xmon or kdump. Unfortunately, the exception handler cannot distinguish it from other interrupt causes by the SRR1 register, which gets used for this on Power 6 and others. IBM Blade servers that want to support triggering the system reset exception using a pinhole button in the front panel therefore use an extra register to determine the reset cause. Signed-off-by: Arnd Bergmann -- Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/cbe_regs.h | 8 ++++++-- arch/powerpc/platforms/cell/pervasive.c | 26 ++++++++++++++++++++++++++ 2 files changed, 32 insertions(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/cbe_regs.h b/arch/powerpc/platforms/cell/cbe_regs.h index 17d59714487..b24025f2ac7 100644 --- a/arch/powerpc/platforms/cell/cbe_regs.h +++ b/arch/powerpc/platforms/cell/cbe_regs.h @@ -113,10 +113,14 @@ struct cbe_pmd_regs { u64 checkstop_fir; /* 0x0c00 */ u64 recoverable_fir; /* 0x0c08 */ u64 spec_att_mchk_fir; /* 0x0c10 */ - u64 fir_mode_reg; /* 0x0c18 */ + u32 fir_mode_reg; /* 0x0c18 */ + u8 pad_0x0c1c_0x0c20 [4]; /* 0x0c1c */ +#define CBE_PMD_FIR_MODE_M8 0x00800 u64 fir_enable_mask; /* 0x0c20 */ - u8 pad_0x0c28_0x1000 [0x1000 - 0x0c28]; /* 0x0c28 */ + u8 pad_0x0c28_0x0ca8 [0x0ca8 - 0x0c28]; /* 0x0c28 */ + u64 ras_esc_0; /* 0x0ca8 */ + u8 pad_0x0cb0_0x1000 [0x1000 - 0x0cb0]; /* 0x0cb0 */ }; extern struct cbe_pmd_regs __iomem *cbe_get_pmd_regs(struct device_node *np); diff --git a/arch/powerpc/platforms/cell/pervasive.c b/arch/powerpc/platforms/cell/pervasive.c index 812bf563ed6..4ede22d363f 100644 --- a/arch/powerpc/platforms/cell/pervasive.c +++ b/arch/powerpc/platforms/cell/pervasive.c @@ -38,6 +38,8 @@ #include "pervasive.h" #include "cbe_regs.h" +static int sysreset_hack; + static void cbe_power_save(void) { unsigned long ctrl, thread_switch_control; @@ -85,6 +87,9 @@ static void cbe_power_save(void) static int cbe_system_reset_exception(struct pt_regs *regs) { + int cpu; + struct cbe_pmd_regs __iomem *pmd; + switch (regs->msr & SRR1_WAKEMASK) { case SRR1_WAKEEE: do_IRQ(regs); @@ -93,6 +98,18 @@ static int cbe_system_reset_exception(struct pt_regs *regs) timer_interrupt(regs); break; case SRR1_WAKEMT: + /* + * The BMC can inject user triggered system reset exceptions, + * but cannot set the system reset reason in srr1, + * so check an extra register here. + */ + if (sysreset_hack && (cpu = smp_processor_id()) == 0) { + pmd = cbe_get_cpu_pmd_regs(cpu); + if (in_be64(&pmd->ras_esc_0) & 0xffff) { + out_be64(&pmd->ras_esc_0, 0); + return 0; + } + } break; #ifdef CONFIG_CBE_RAS case SRR1_WAKESYSERR: @@ -113,9 +130,12 @@ static int cbe_system_reset_exception(struct pt_regs *regs) void __init cbe_pervasive_init(void) { int cpu; + if (!cpu_has_feature(CPU_FTR_PAUSE_ZERO)) return; + sysreset_hack = machine_is_compatible("IBM,CBPLUS-1.0"); + for_each_possible_cpu(cpu) { struct cbe_pmd_regs __iomem *regs = cbe_get_cpu_pmd_regs(cpu); if (!regs) @@ -124,6 +144,12 @@ void __init cbe_pervasive_init(void) /* Enable Pause(0) control bit */ out_be64(®s->pmcr, in_be64(®s->pmcr) | CBE_PMD_PAUSE_ZERO_CONTROL); + + /* Enable JTAG system-reset hack */ + if (sysreset_hack) + out_be32(®s->fir_mode_reg, + in_be32(®s->fir_mode_reg) | + CBE_PMD_FIR_MODE_M8); } ppc_md.power_save = cbe_power_save; -- cgit v1.2.3 From fedcd2c53d838e7a69df699ce2a14e45d34d7f7f Mon Sep 17 00:00:00 2001 From: Maxim Shchetynin Date: Thu, 23 Aug 2007 03:01:27 +1000 Subject: [POWERPC] axonram: Module modification for latest firmware API changes Firmware would not deliver two interrupt numbers in device-tree any more but only one, for correctable ECC, because uncorrectable ECC from now is handled by firmware itself. Changes in the axonram module are necessary because in the old version, if it is not allowed to fetch the second interrupt number from device-tree, it interpretes this as an error case and exits. Signed-off-by: Maximilian Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/sysdev/axonram.c | 43 +++++++++++-------------------------------- 1 file changed, 11 insertions(+), 32 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/sysdev/axonram.c b/arch/powerpc/sysdev/axonram.c index 2326d5dc575..eabbf82fda3 100644 --- a/arch/powerpc/sysdev/axonram.c +++ b/arch/powerpc/sysdev/axonram.c @@ -59,8 +59,7 @@ struct axon_ram_bank { struct of_device *device; struct gendisk *disk; - unsigned int irq_correctable; - unsigned int irq_uncorrectable; + unsigned int irq_id; unsigned long ph_addr; unsigned long io_addr; unsigned long size; @@ -93,16 +92,9 @@ axon_ram_irq_handler(int irq, void *dev) BUG_ON(!bank); - if (irq == bank->irq_correctable) { - dev_err(&device->dev, "Correctable memory error occured\n"); - bank->ecc_counter++; - return IRQ_HANDLED; - } else if (irq == bank->irq_uncorrectable) { - dev_err(&device->dev, "Uncorrectable memory error occured\n"); - panic("Critical ECC error on %s", device->node->full_name); - } - - return IRQ_NONE; + dev_err(&device->dev, "Correctable memory error occured\n"); + bank->ecc_counter++; + return IRQ_HANDLED; } /** @@ -259,28 +251,18 @@ axon_ram_probe(struct of_device *device, const struct of_device_id *device_id) blk_queue_hardsect_size(bank->disk->queue, AXON_RAM_SECTOR_SIZE); add_disk(bank->disk); - bank->irq_correctable = irq_of_parse_and_map(device->node, 0); - bank->irq_uncorrectable = irq_of_parse_and_map(device->node, 1); - if ((bank->irq_correctable <= 0) || (bank->irq_uncorrectable <= 0)) { + bank->irq_id = irq_of_parse_and_map(device->node, 0); + if (bank->irq_id == NO_IRQ) { dev_err(&device->dev, "Cannot access ECC interrupt ID\n"); rc = -EFAULT; goto failed; } - rc = request_irq(bank->irq_correctable, axon_ram_irq_handler, - AXON_RAM_IRQ_FLAGS, bank->disk->disk_name, device); - if (rc != 0) { - dev_err(&device->dev, "Cannot register ECC interrupt handler\n"); - bank->irq_correctable = bank->irq_uncorrectable = 0; - rc = -EFAULT; - goto failed; - } - - rc = request_irq(bank->irq_uncorrectable, axon_ram_irq_handler, + rc = request_irq(bank->irq_id, axon_ram_irq_handler, AXON_RAM_IRQ_FLAGS, bank->disk->disk_name, device); if (rc != 0) { dev_err(&device->dev, "Cannot register ECC interrupt handler\n"); - bank->irq_uncorrectable = 0; + bank->irq_id = NO_IRQ; rc = -EFAULT; goto failed; } @@ -296,10 +278,8 @@ axon_ram_probe(struct of_device *device, const struct of_device_id *device_id) failed: if (bank != NULL) { - if (bank->irq_uncorrectable > 0) - free_irq(bank->irq_uncorrectable, device); - if (bank->irq_correctable > 0) - free_irq(bank->irq_correctable, device); + if (bank->irq_id != NO_IRQ) + free_irq(bank->irq_id, device); if (bank->disk != NULL) { if (bank->disk->queue != NULL) blk_cleanup_queue(bank->disk->queue); @@ -329,8 +309,7 @@ axon_ram_remove(struct of_device *device) BUG_ON(!bank || !bank->disk); device_remove_file(&device->dev, &dev_attr_ecc); - free_irq(bank->irq_uncorrectable, device); - free_irq(bank->irq_correctable, device); + free_irq(bank->irq_id, device); blk_cleanup_queue(bank->disk->queue); unregister_blkdev(bank->disk->major, bank->disk->disk_name); del_gendisk(bank->disk); -- cgit v1.2.3 From b0e81ebb1062eba20fbcbe459662c0a6ec6075f7 Mon Sep 17 00:00:00 2001 From: Maxim Shchetynin Date: Thu, 23 Aug 2007 03:01:28 +1000 Subject: [POWERPC] axonram: Do not delete gendisks queue in error path On exit do not delete gendisk's queue because this is already done by del_gendisk(). Doing it twice may cause memory damage. Signed-off-by: Maximilian Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/sysdev/axonram.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/sysdev/axonram.c b/arch/powerpc/sysdev/axonram.c index eabbf82fda3..ab037a3a40d 100644 --- a/arch/powerpc/sysdev/axonram.c +++ b/arch/powerpc/sysdev/axonram.c @@ -281,8 +281,6 @@ failed: if (bank->irq_id != NO_IRQ) free_irq(bank->irq_id, device); if (bank->disk != NULL) { - if (bank->disk->queue != NULL) - blk_cleanup_queue(bank->disk->queue); if (bank->disk->major > 0) unregister_blkdev(bank->disk->major, bank->disk->disk_name); @@ -310,7 +308,6 @@ axon_ram_remove(struct of_device *device) device_remove_file(&device->dev, &dev_attr_ecc); free_irq(bank->irq_id, device); - blk_cleanup_queue(bank->disk->queue); unregister_blkdev(bank->disk->major, bank->disk->disk_name); del_gendisk(bank->disk); iounmap((void __iomem *) bank->io_addr); -- cgit v1.2.3 From b22ddc703c5daa603d8d53881b530da3cab94cd4 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 23 Aug 2007 03:09:17 +1000 Subject: [POWERPC] cell: Update cell_defconfig for 2.6.23 Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/configs/cell_defconfig | 220 +++++++++++++----------------------- 1 file changed, 76 insertions(+), 144 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig index d9ac24e8de1..8b47c846421 100644 --- a/arch/powerpc/configs/cell_defconfig +++ b/arch/powerpc/configs/cell_defconfig @@ -1,9 +1,23 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-rc6 -# Tue Jun 26 12:32:34 2007 +# Linux kernel version: 2.6.23-rc3 +# Wed Aug 22 15:19:19 2007 # CONFIG_PPC64=y + +# +# Processor support +# +# CONFIG_POWER4_ONLY is not set +CONFIG_POWER3=y +CONFIG_POWER4=y +CONFIG_PPC_FPU=y +CONFIG_ALTIVEC=y +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_MM_SLICES=y +CONFIG_VIRT_CPU_ACCOUNTING=y +CONFIG_SMP=y +CONFIG_NR_CPUS=4 CONFIG_64BIT=y CONFIG_PPC_MERGE=y CONFIG_MMU=y @@ -15,6 +29,7 @@ CONFIG_ARCH_HAS_ILOG2_U64=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y @@ -22,51 +37,33 @@ CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y +CONFIG_OF=y CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y # CONFIG_DEFAULT_UIMAGE is not set - -# -# Processor support -# -# CONFIG_POWER4_ONLY is not set -CONFIG_POWER3=y -CONFIG_POWER4=y -CONFIG_PPC_FPU=y # CONFIG_PPC_DCR_NATIVE is not set CONFIG_PPC_DCR_MMIO=y CONFIG_PPC_DCR=y CONFIG_PPC_OF_PLATFORM_PCI=y -CONFIG_ALTIVEC=y -CONFIG_PPC_STD_MMU=y -CONFIG_PPC_MM_SLICES=y -CONFIG_VIRT_CPU_ACCOUNTING=y -CONFIG_SMP=y -CONFIG_NR_CPUS=4 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y @@ -96,16 +93,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set @@ -113,12 +107,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -138,7 +129,9 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_PPC_MULTIPLATFORM=y # CONFIG_EMBEDDED6xx is not set -# CONFIG_APUS is not set +# CONFIG_PPC_82xx is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set # CONFIG_PPC_PSERIES is not set # CONFIG_PPC_ISERIES is not set # CONFIG_PPC_MPC52xx is not set @@ -158,7 +151,11 @@ CONFIG_PS3_HTAB_SIZE=20 CONFIG_PS3_USE_LPAR_ADDR=y CONFIG_PS3_VUART=y CONFIG_PS3_PS3AV=y -CONFIG_PS3_SYS_MANAGER=y +CONFIG_PS3_SYS_MANAGER=m +CONFIG_PS3_STORAGE=y +CONFIG_PS3_DISK=y +CONFIG_PS3_ROM=m +CONFIG_PS3_FLASH=m CONFIG_PPC_CELL=y CONFIG_PPC_CELL_NATIVE=y CONFIG_PPC_IBM_CELL_BLADE=y @@ -171,6 +168,7 @@ CONFIG_SPU_BASE=y CONFIG_CBE_RAS=y CONFIG_CBE_THERM=m CONFIG_CBE_CPUFREQ=m +CONFIG_CBE_CPUFREQ_PMI=m # CONFIG_PQ2ADS is not set CONFIG_PPC_NATIVE=y CONFIG_UDBG_RTAS_CONSOLE=y @@ -183,7 +181,7 @@ CONFIG_PPC_RTAS=y # CONFIG_RTAS_ERROR_LOGGING is not set CONFIG_RTAS_PROC=y CONFIG_RTAS_FLASH=y -# CONFIG_PPC_PMI is not set +CONFIG_PPC_PMI=m CONFIG_MMIO_NVRAM=y # CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set @@ -206,6 +204,8 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y # CPU Frequency drivers # # CONFIG_CPM2 is not set +CONFIG_AXON_RAM=m +# CONFIG_FSL_ULI1575 is not set # # Kernel options @@ -248,6 +248,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y CONFIG_ARCH_MEMORY_PROBE=y CONFIG_NODES_SPAN_OTHER_NODES=y CONFIG_PPC_HAS_HASH_64K=y @@ -268,7 +269,9 @@ CONFIG_GENERIC_ISA_DMA=y # CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y CONFIG_PCIEPORTBUS=y +CONFIG_PCIEAER=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_DEBUG is not set @@ -359,6 +362,7 @@ CONFIG_NETFILTER_XT_TARGET_DSCP=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_DCCP=m @@ -377,6 +381,7 @@ CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_U32=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m # @@ -448,6 +453,7 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -462,28 +468,12 @@ CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set - -# -# Parallel port support -# +CONFIG_OF_DEVICE=y # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set @@ -499,14 +489,11 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# +CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set -# CONFIG_BLINK is not set CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y @@ -572,6 +559,7 @@ CONFIG_BLK_DEV_IDEDMA=y # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -604,10 +592,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_ISCSI_ATTRS is not set CONFIG_SCSI_SAS_ATTRS=y # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set @@ -622,7 +607,6 @@ CONFIG_SCSI_SAS_ATTRS=y # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -696,10 +680,6 @@ CONFIG_PATA_PDC2027X=m # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_SCC is not set - -# -# Multi-device support (RAID and LVM) -# CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -717,6 +697,7 @@ CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m # CONFIG_DM_MULTIPATH_EMC is not set +# CONFIG_DM_MULTIPATH_RDAC is not set # CONFIG_DM_DELAY is not set # @@ -728,43 +709,30 @@ CONFIG_FUSION=y CONFIG_FUSION_SAS=y CONFIG_FUSION_MAX_SGE=128 # CONFIG_FUSION_CTL is not set +# CONFIG_FUSION_LOGGING is not set # # IEEE 1394 (FireWire) support # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set - -# -# I2O device support -# # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set CONFIG_BONDING=m +CONFIG_MACVLAN=m # CONFIG_EQUALIZER is not set CONFIG_TUN=y # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_NET_PCI is not set @@ -781,11 +749,12 @@ CONFIG_E1000_NAPI=y # CONFIG_SIS190 is not set CONFIG_SKGE=m CONFIG_SKY2=m -# CONFIG_SK98LIN is not set +# CONFIG_SKY2_DEBUG is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y # CONFIG_BNX2 is not set CONFIG_SPIDER_NET=y +CONFIG_GELIC_NET=m # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set CONFIG_NETDEV_10000=y @@ -824,15 +793,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -925,10 +886,6 @@ CONFIG_UNIX98_PTYS=y CONFIG_HVC_DRIVER=y CONFIG_HVC_RTAS=y CONFIG_HVC_BEAT=y - -# -# IPMI -# CONFIG_IPMI_HANDLER=m # CONFIG_IPMI_PANIC_EVENT is not set CONFIG_IPMI_DEVICE_INTERFACE=m @@ -963,10 +920,6 @@ CONFIG_GEN_RTC=y # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HANGCHECK_TIMER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y CONFIG_I2C=y @@ -1000,6 +953,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set @@ -1011,11 +965,13 @@ CONFIG_I2C_ALGOBIT=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -1026,11 +982,8 @@ CONFIG_I2C_ALGOBIT=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # @@ -1055,6 +1008,7 @@ CONFIG_I2C_ALGOBIT=y # # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_FB is not set # CONFIG_FB_IBM_GXT4500 is not set @@ -1068,10 +1022,7 @@ CONFIG_DUMMY_CONSOLE=y # Sound # # CONFIG_SOUND is not set - -# -# HID Devices -# +CONFIG_HID_SUPPORT=y CONFIG_HID=m # CONFIG_HID_DEBUG is not set @@ -1085,10 +1036,7 @@ CONFIG_HID=m # # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set - -# -# USB support -# +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y @@ -1122,6 +1070,7 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers @@ -1199,23 +1148,7 @@ CONFIG_USB_MON=y # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# CONFIG_INFINIBAND=m CONFIG_INFINIBAND_USER_MAD=m CONFIG_INFINIBAND_USER_ACCESS=m @@ -1231,14 +1164,13 @@ CONFIG_INFINIBAND_IPOIB_DEBUG=y CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y # CONFIG_INFINIBAND_SRP is not set # CONFIG_INFINIBAND_ISER is not set +CONFIG_EDAC=y # -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock +# Reporting subsystems # +# CONFIG_EDAC_DEBUG is not set +CONFIG_EDAC_MM_EDAC=y # CONFIG_RTC_CLASS is not set # @@ -1254,6 +1186,12 @@ CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y # DMA Devices # +# +# Userspace I/O +# +CONFIG_UIO=m +# CONFIG_UIO_CIF is not set + # # File systems # @@ -1357,7 +1295,6 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -1439,6 +1376,7 @@ CONFIG_BITREVERSE=y # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m @@ -1471,9 +1409,10 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set # CONFIG_DETECT_SOFTLOCKUP is not set +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_SLAB is not set +# CONFIG_SLUB_DEBUG_ON is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1504,10 +1443,6 @@ CONFIG_IRQSTACKS=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=m @@ -1546,7 +1481,4 @@ CONFIG_CRYPTO_DEFLATE=m # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +CONFIG_CRYPTO_HW=y -- cgit v1.2.3 From 175587cca7447daf5a13e4a53d32360ed8cba804 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Sat, 25 Aug 2007 13:14:28 +1000 Subject: [POWERPC] Fix SLB initialization at boot time This partially reverts edd0622bd2e8f755c960827e15aa6908c3c5aa94. It turns out that the part of that commit that aimed to ensure that we created an SLB entry for the kernel stack on secondary CPUs when starting the CPU didn't achieve its aim, and in fact caused a regression, because get_paca()->kstack is not initialized at the point where slb_initialize is called. This therefore just reverts that part of that commit, while keeping the change to slb_flush_and_rebolt, which is correct and necessary. Signed-off-by: Paul Mackerras --- arch/powerpc/mm/slb.c | 36 ++++++++++++++++++++++++++++-------- 1 file changed, 28 insertions(+), 8 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c index a73d2d70097..ff1811ac6c8 100644 --- a/arch/powerpc/mm/slb.c +++ b/arch/powerpc/mm/slb.c @@ -74,6 +74,22 @@ static inline void slb_shadow_clear(unsigned long entry) get_slb_shadow()->save_area[entry].esid = 0; } +static inline void create_shadowed_slbe(unsigned long ea, unsigned long flags, + unsigned long entry) +{ + /* + * Updating the shadow buffer before writing the SLB ensures + * we don't get a stale entry here if we get preempted by PHYP + * between these two statements. + */ + slb_shadow_update(ea, flags, entry); + + asm volatile("slbmte %0,%1" : + : "r" (mk_vsid_data(ea, flags)), + "r" (mk_esid_data(ea, entry)) + : "memory" ); +} + void slb_flush_and_rebolt(void) { /* If you change this make sure you change SLB_NUM_BOLTED @@ -226,12 +242,16 @@ void slb_initialize(void) vflags = SLB_VSID_KERNEL | vmalloc_llp; /* Invalidate the entire SLB (even slot 0) & all the ERATS */ - slb_shadow_update(PAGE_OFFSET, lflags, 0); - asm volatile("isync; slbia; sync; slbmte %0,%1; isync" :: - "r" (get_slb_shadow()->save_area[0].vsid), - "r" (get_slb_shadow()->save_area[0].esid) : "memory"); - - slb_shadow_update(VMALLOC_START, vflags, 1); - - slb_flush_and_rebolt(); + asm volatile("isync":::"memory"); + asm volatile("slbmte %0,%0"::"r" (0) : "memory"); + asm volatile("isync; slbia; isync":::"memory"); + create_shadowed_slbe(PAGE_OFFSET, lflags, 0); + + create_shadowed_slbe(VMALLOC_START, vflags, 1); + + /* We don't bolt the stack for the time being - we're in boot, + * so the stack is in the bolted segment. By the time it goes + * elsewhere, we'll call _switch() which will bolt in the new + * one. */ + asm volatile("isync":::"memory"); } -- cgit v1.2.3