From b8f8c3cf0a4ac0632ec3f0e15e9dc0c29de917af Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 18 Jul 2008 17:27:28 +0200 Subject: nohz: prevent tick stop outside of the idle loop Jack Ren and Eric Miao tracked down the following long standing problem in the NOHZ code: scheduler switch to idle task enable interrupts Window starts here ----> interrupt happens (does not set NEED_RESCHED) irq_exit() stops the tick ----> interrupt happens (does set NEED_RESCHED) return from schedule() cpu_idle(): preempt_disable(); Window ends here The interrupts can happen at any point inside the race window. The first interrupt stops the tick, the second one causes the scheduler to rerun and switch away from idle again and we end up with the tick disabled. The fact that it needs two interrupts where the first one does not set NEED_RESCHED and the second one does made the bug obscure and extremly hard to reproduce and analyse. Kudos to Jack and Eric. Solution: Limit the NOHZ functionality to the idle loop to make sure that we can not run into such a situation ever again. cpu_idle() { preempt_disable(); while(1) { tick_nohz_stop_sched_tick(1); <- tell NOHZ code that we are in the idle loop while (!need_resched()) halt(); tick_nohz_restart_sched_tick(); <- disables NOHZ mode preempt_enable_no_resched(); schedule(); preempt_disable(); } } In hindsight we should have done this forever, but ... /me grabs a large brown paperbag. Debugged-by: Jack Ren , Debugged-by: eric miao Signed-off-by: Thomas Gleixner --- arch/powerpc/kernel/idle.c | 2 +- arch/powerpc/platforms/iseries/setup.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c index c3cf0e8f3ac..d308a9f70f1 100644 --- a/arch/powerpc/kernel/idle.c +++ b/arch/powerpc/kernel/idle.c @@ -60,7 +60,7 @@ void cpu_idle(void) set_thread_flag(TIF_POLLING_NRFLAG); while (1) { - tick_nohz_stop_sched_tick(); + tick_nohz_stop_sched_tick(1); while (!need_resched() && !cpu_should_die()) { ppc64_runlatch_off(); diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index b72120751bb..70b688c1aef 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -561,7 +561,7 @@ static void yield_shared_processor(void) static void iseries_shared_idle(void) { while (1) { - tick_nohz_stop_sched_tick(); + tick_nohz_stop_sched_tick(1); while (!need_resched() && !hvlpevent_is_pending()) { local_irq_disable(); ppc64_runlatch_off(); @@ -591,7 +591,7 @@ static void iseries_dedicated_idle(void) set_thread_flag(TIF_POLLING_NRFLAG); while (1) { - tick_nohz_stop_sched_tick(); + tick_nohz_stop_sched_tick(1); if (!need_resched()) { while (!need_resched()) { ppc64_runlatch_off(); -- cgit v1.2.3 From 78f56bd3d2dbe173bf1a946b353bf72ab9c0b94e Mon Sep 17 00:00:00 2001 From: Jon Smirl Date: Sun, 20 Jul 2008 11:30:08 -0400 Subject: powerpc/mpc5200: Remove fsl-soc.c from mpc5200 build, it is not needed. Signed-off-by: Jon Smirl Signed-off-by: Grant Likely --- arch/powerpc/platforms/52xx/Kconfig | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig index acd2fc8cf49..981b84b7599 100644 --- a/arch/powerpc/platforms/52xx/Kconfig +++ b/arch/powerpc/platforms/52xx/Kconfig @@ -1,7 +1,6 @@ config PPC_MPC52xx bool "52xx-based boards" depends on PPC_MULTIPLATFORM && PPC32 - select FSL_SOC select PPC_CLOCK config PPC_MPC5200_SIMPLE -- cgit v1.2.3 From 6d5509babce654fd9ce0ff6689dbdf6ce56c43ae Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 15 May 2008 17:04:53 -0600 Subject: powerpc/mpc5200: Make mpc5200 GPIO driver select the GENERIC_GPIO config CONFIG_GENERIC_GPIO is needed for the gpio driver to work. Signed-off-by: Grant Likely --- arch/powerpc/platforms/52xx/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig index 981b84b7599..c1ca4f3ee5d 100644 --- a/arch/powerpc/platforms/52xx/Kconfig +++ b/arch/powerpc/platforms/52xx/Kconfig @@ -46,6 +46,7 @@ config PPC_MPC5200_BUGFIX config PPC_MPC5200_GPIO bool "MPC5200 GPIO support" depends on PPC_MPC52xx + select GENERIC_GPIO select HAVE_GPIO_LIB help Enable gpiolib support for mpc5200 based boards -- cgit v1.2.3 From 9bcab8405c98c34849c5795c717b7e6a3e2d3875 Mon Sep 17 00:00:00 2001 From: Milton Miller Date: Fri, 11 Jul 2008 09:03:09 +1000 Subject: powerpc/spufs: correct kcalloc usage kcalloc is supposed to be called with the count as its first argument and the element size as the second. Signed-off-by: Milton Miller Signed-off-by: Jeremy Kerr --- arch/powerpc/platforms/cell/spufs/sputrace.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/spufs/sputrace.c b/arch/powerpc/platforms/cell/spufs/sputrace.c index 8c0e95766a6..92d20e993ed 100644 --- a/arch/powerpc/platforms/cell/spufs/sputrace.c +++ b/arch/powerpc/platforms/cell/spufs/sputrace.c @@ -196,8 +196,7 @@ static int __init sputrace_init(void) struct proc_dir_entry *entry; int i, error = -ENOMEM; - sputrace_log = kcalloc(sizeof(struct sputrace), - bufsize, GFP_KERNEL); + sputrace_log = kcalloc(bufsize, sizeof(struct sputrace), GFP_KERNEL); if (!sputrace_log) goto out; -- cgit v1.2.3 From 17ce452f7ea3df760b7f9f42453b6f6acd765217 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Wed, 23 Jul 2008 11:30:15 -0500 Subject: kgdb, powerpc: arch specific powerpc kgdb support This patch removes the old kgdb reminants from ARCH=powerpc and implements the new style arch specific stub for the common kgdb core interface. It is possible to have xmon and kgdb in the same kernel, but you cannot use both at the same time because there is only one set of debug hooks. The arch specific kgdb implementation saves the previous state of the debug hooks and restores them if you unconfigure the kgdb I/O driver. Kgdb should have no impact on a kernel that has no kgdb I/O driver configured. Signed-off-by: Jason Wessel --- arch/powerpc/Kconfig | 1 + arch/powerpc/Kconfig.debug | 50 +--- arch/powerpc/kernel/Makefile | 1 + arch/powerpc/kernel/kgdb.c | 410 ++++++++++++++++++++++++++++++++ arch/powerpc/kernel/setup_32.c | 16 -- arch/powerpc/platforms/powermac/setup.c | 6 - 6 files changed, 418 insertions(+), 66 deletions(-) create mode 100644 arch/powerpc/kernel/kgdb.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 4c22242b396..737ebf9d12b 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -112,6 +112,7 @@ config PPC select HAVE_FTRACE select HAVE_IDE select HAVE_KPROBES + select HAVE_ARCH_KGDB select HAVE_KRETPROBES select HAVE_LMB select HAVE_DMA_ATTRS if PPC64 diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index 2840ab69ef4..8c8aadbe956 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -41,22 +41,6 @@ config HCALL_STATS This option will add a small amount of overhead to all hypervisor calls. -config DEBUGGER - bool "Enable debugger hooks" - depends on DEBUG_KERNEL - help - Include in-kernel hooks for kernel debuggers. Unless you are - intending to debug the kernel, say N here. - -config KGDB - bool "Include kgdb kernel debugger" - depends on DEBUGGER && (BROKEN || PPC_GEN550 || 4xx) - select DEBUG_INFO - help - Include in-kernel hooks for kgdb, the Linux kernel source level - debugger. See for more information. - Unless you are intending to debug the kernel, say N here. - config CODE_PATCHING_SELFTEST bool "Run self-tests of the code-patching code." depends on DEBUG_KERNEL @@ -67,36 +51,9 @@ config FTR_FIXUP_SELFTEST depends on DEBUG_KERNEL default n -choice - prompt "Serial Port" - depends on KGDB - default KGDB_TTYS1 - -config KGDB_TTYS0 - bool "ttyS0" - -config KGDB_TTYS1 - bool "ttyS1" - -config KGDB_TTYS2 - bool "ttyS2" - -config KGDB_TTYS3 - bool "ttyS3" - -endchoice - -config KGDB_CONSOLE - bool "Enable serial console thru kgdb port" - depends on KGDB && 8xx || CPM2 - help - If you enable this, all serial console messages will be sent - over the gdb stub. - If unsure, say N. - config XMON bool "Include xmon kernel debugger" - depends on DEBUGGER + depends on DEBUG_KERNEL help Include in-kernel hooks for the xmon kernel monitor/debugger. Unless you are intending to debug the kernel, say N here. @@ -126,6 +83,11 @@ config XMON_DISASSEMBLY to say Y here, unless you're building for a memory-constrained system. +config DEBUGGER + bool + depends on KGDB || XMON + default y + config IRQSTACKS bool "Use separate kernel stacks when processing interrupts" help diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index bf0b1fd0ec3..1a4094704b1 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -74,6 +74,7 @@ obj-y += time.o prom.o traps.o setup-common.o \ misc_$(CONFIG_WORD_SIZE).o obj-$(CONFIG_PPC32) += entry_32.o setup_32.o obj-$(CONFIG_PPC64) += dma_64.o iommu.o +obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_PPC_MULTIPLATFORM) += prom_init.o obj-$(CONFIG_MODULES) += ppc_ksyms.o obj-$(CONFIG_BOOTX_TEXT) += btext.o diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c new file mode 100644 index 00000000000..b4fdf2f2743 --- /dev/null +++ b/arch/powerpc/kernel/kgdb.c @@ -0,0 +1,410 @@ +/* + * PowerPC backend to the KGDB stub. + * + * 1998 (c) Michael AK Tesch (tesch@cs.wisc.edu) + * Copyright (C) 2003 Timesys Corporation. + * Copyright (C) 2004-2006 MontaVista Software, Inc. + * PPC64 Mods (C) 2005 Frank Rowand (frowand@mvista.com) + * PPC32 support restored by Vitaly Wool and + * Sergei Shtylyov + * Copyright (C) 2007-2008 Wind River Systems, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program as licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * This table contains the mapping between PowerPC hardware trap types, and + * signals, which are primarily what GDB understands. GDB and the kernel + * don't always agree on values, so we use constants taken from gdb-6.2. + */ +static struct hard_trap_info +{ + unsigned int tt; /* Trap type code for powerpc */ + unsigned char signo; /* Signal that we map this trap into */ +} hard_trap_info[] = { + { 0x0100, 0x02 /* SIGINT */ }, /* system reset */ + { 0x0200, 0x0b /* SIGSEGV */ }, /* machine check */ + { 0x0300, 0x0b /* SIGSEGV */ }, /* data access */ + { 0x0400, 0x0b /* SIGSEGV */ }, /* instruction access */ + { 0x0500, 0x02 /* SIGINT */ }, /* external interrupt */ + { 0x0600, 0x0a /* SIGBUS */ }, /* alignment */ + { 0x0700, 0x05 /* SIGTRAP */ }, /* program check */ + { 0x0800, 0x08 /* SIGFPE */ }, /* fp unavailable */ + { 0x0900, 0x0e /* SIGALRM */ }, /* decrementer */ + { 0x0c00, 0x14 /* SIGCHLD */ }, /* system call */ +#if defined(CONFIG_40x) || defined(CONFIG_BOOKE) + { 0x2002, 0x05 /* SIGTRAP */ }, /* debug */ +#if defined(CONFIG_FSL_BOOKE) + { 0x2010, 0x08 /* SIGFPE */ }, /* spe unavailable */ + { 0x2020, 0x08 /* SIGFPE */ }, /* spe unavailable */ + { 0x2030, 0x08 /* SIGFPE */ }, /* spe fp data */ + { 0x2040, 0x08 /* SIGFPE */ }, /* spe fp data */ + { 0x2050, 0x08 /* SIGFPE */ }, /* spe fp round */ + { 0x2060, 0x0e /* SIGILL */ }, /* performace monitor */ + { 0x2900, 0x08 /* SIGFPE */ }, /* apu unavailable */ + { 0x3100, 0x0e /* SIGALRM */ }, /* fixed interval timer */ + { 0x3200, 0x02 /* SIGINT */ }, /* watchdog */ +#else /* ! CONFIG_FSL_BOOKE */ + { 0x1000, 0x0e /* SIGALRM */ }, /* prog interval timer */ + { 0x1010, 0x0e /* SIGALRM */ }, /* fixed interval timer */ + { 0x1020, 0x02 /* SIGINT */ }, /* watchdog */ + { 0x2010, 0x08 /* SIGFPE */ }, /* fp unavailable */ + { 0x2020, 0x08 /* SIGFPE */ }, /* ap unavailable */ +#endif +#else /* ! (defined(CONFIG_40x) || defined(CONFIG_BOOKE)) */ + { 0x0d00, 0x05 /* SIGTRAP */ }, /* single-step */ +#if defined(CONFIG_8xx) + { 0x1000, 0x04 /* SIGILL */ }, /* software emulation */ +#else /* ! CONFIG_8xx */ + { 0x0f00, 0x04 /* SIGILL */ }, /* performance monitor */ + { 0x0f20, 0x08 /* SIGFPE */ }, /* altivec unavailable */ + { 0x1300, 0x05 /* SIGTRAP */ }, /* instruction address break */ +#if defined(CONFIG_PPC64) + { 0x1200, 0x05 /* SIGILL */ }, /* system error */ + { 0x1500, 0x04 /* SIGILL */ }, /* soft patch */ + { 0x1600, 0x04 /* SIGILL */ }, /* maintenance */ + { 0x1700, 0x08 /* SIGFPE */ }, /* altivec assist */ + { 0x1800, 0x04 /* SIGILL */ }, /* thermal */ +#else /* ! CONFIG_PPC64 */ + { 0x1400, 0x02 /* SIGINT */ }, /* SMI */ + { 0x1600, 0x08 /* SIGFPE */ }, /* altivec assist */ + { 0x1700, 0x04 /* SIGILL */ }, /* TAU */ + { 0x2000, 0x05 /* SIGTRAP */ }, /* run mode */ +#endif +#endif +#endif + { 0x0000, 0x00 } /* Must be last */ +}; + +static int computeSignal(unsigned int tt) +{ + struct hard_trap_info *ht; + + for (ht = hard_trap_info; ht->tt && ht->signo; ht++) + if (ht->tt == tt) + return ht->signo; + + return SIGHUP; /* default for things we don't know about */ +} + +static int kgdb_call_nmi_hook(struct pt_regs *regs) +{ + kgdb_nmicallback(raw_smp_processor_id(), regs); + return 0; +} + +#ifdef CONFIG_SMP +void kgdb_roundup_cpus(unsigned long flags) +{ + smp_send_debugger_break(MSG_ALL_BUT_SELF); +} +#endif + +/* KGDB functions to use existing PowerPC64 hooks. */ +static int kgdb_debugger(struct pt_regs *regs) +{ + return kgdb_handle_exception(0, computeSignal(TRAP(regs)), 0, regs); +} + +static int kgdb_handle_breakpoint(struct pt_regs *regs) +{ + if (user_mode(regs)) + return 0; + + if (kgdb_handle_exception(0, SIGTRAP, 0, regs) != 0) + return 0; + + if (*(u32 *) (regs->nip) == *(u32 *) (&arch_kgdb_ops.gdb_bpt_instr)) + regs->nip += 4; + + return 1; +} + +static int kgdb_singlestep(struct pt_regs *regs) +{ + struct thread_info *thread_info, *exception_thread_info; + + if (user_mode(regs)) + return 0; + + /* + * On Book E and perhaps other processsors, singlestep is handled on + * the critical exception stack. This causes current_thread_info() + * to fail, since it it locates the thread_info by masking off + * the low bits of the current stack pointer. We work around + * this issue by copying the thread_info from the kernel stack + * before calling kgdb_handle_exception, and copying it back + * afterwards. On most processors the copy is avoided since + * exception_thread_info == thread_info. + */ + thread_info = (struct thread_info *)(regs->gpr[1] & ~(THREAD_SIZE-1)); + exception_thread_info = current_thread_info(); + + if (thread_info != exception_thread_info) + memcpy(exception_thread_info, thread_info, sizeof *thread_info); + + kgdb_handle_exception(0, SIGTRAP, 0, regs); + + if (thread_info != exception_thread_info) + memcpy(thread_info, exception_thread_info, sizeof *thread_info); + + return 1; +} + +static int kgdb_iabr_match(struct pt_regs *regs) +{ + if (user_mode(regs)) + return 0; + + if (kgdb_handle_exception(0, computeSignal(TRAP(regs)), 0, regs) != 0) + return 0; + return 1; +} + +static int kgdb_dabr_match(struct pt_regs *regs) +{ + if (user_mode(regs)) + return 0; + + if (kgdb_handle_exception(0, computeSignal(TRAP(regs)), 0, regs) != 0) + return 0; + return 1; +} + +#define PACK64(ptr, src) do { *(ptr++) = (src); } while (0) + +#define PACK32(ptr, src) do { \ + u32 *ptr32; \ + ptr32 = (u32 *)ptr; \ + *(ptr32++) = (src); \ + ptr = (unsigned long *)ptr32; \ + } while (0) + + +void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) +{ + unsigned long *ptr = gdb_regs; + int reg; + + memset(gdb_regs, 0, NUMREGBYTES); + + for (reg = 0; reg < 32; reg++) + PACK64(ptr, regs->gpr[reg]); + +#ifdef CONFIG_FSL_BOOKE +#ifdef CONFIG_SPE + for (reg = 0; reg < 32; reg++) + PACK64(ptr, current->thread.evr[reg]); +#else + ptr += 32; +#endif +#else + /* fp registers not used by kernel, leave zero */ + ptr += 32 * 8 / sizeof(long); +#endif + + PACK64(ptr, regs->nip); + PACK64(ptr, regs->msr); + PACK32(ptr, regs->ccr); + PACK64(ptr, regs->link); + PACK64(ptr, regs->ctr); + PACK32(ptr, regs->xer); + + BUG_ON((unsigned long)ptr > + (unsigned long)(((void *)gdb_regs) + NUMREGBYTES)); +} + +void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p) +{ + struct pt_regs *regs = (struct pt_regs *)(p->thread.ksp + + STACK_FRAME_OVERHEAD); + unsigned long *ptr = gdb_regs; + int reg; + + memset(gdb_regs, 0, NUMREGBYTES); + + /* Regs GPR0-2 */ + for (reg = 0; reg < 3; reg++) + PACK64(ptr, regs->gpr[reg]); + + /* Regs GPR3-13 are caller saved, not in regs->gpr[] */ + ptr += 11; + + /* Regs GPR14-31 */ + for (reg = 14; reg < 32; reg++) + PACK64(ptr, regs->gpr[reg]); + +#ifdef CONFIG_FSL_BOOKE +#ifdef CONFIG_SPE + for (reg = 0; reg < 32; reg++) + PACK64(ptr, p->thread.evr[reg]); +#else + ptr += 32; +#endif +#else + /* fp registers not used by kernel, leave zero */ + ptr += 32 * 8 / sizeof(long); +#endif + + PACK64(ptr, regs->nip); + PACK64(ptr, regs->msr); + PACK32(ptr, regs->ccr); + PACK64(ptr, regs->link); + PACK64(ptr, regs->ctr); + PACK32(ptr, regs->xer); + + BUG_ON((unsigned long)ptr > + (unsigned long)(((void *)gdb_regs) + NUMREGBYTES)); +} + +#define UNPACK64(dest, ptr) do { dest = *(ptr++); } while (0) + +#define UNPACK32(dest, ptr) do { \ + u32 *ptr32; \ + ptr32 = (u32 *)ptr; \ + dest = *(ptr32++); \ + ptr = (unsigned long *)ptr32; \ + } while (0) + +void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs) +{ + unsigned long *ptr = gdb_regs; + int reg; +#ifdef CONFIG_SPE + union { + u32 v32[2]; + u64 v64; + } acc; +#endif + + for (reg = 0; reg < 32; reg++) + UNPACK64(regs->gpr[reg], ptr); + +#ifdef CONFIG_FSL_BOOKE +#ifdef CONFIG_SPE + for (reg = 0; reg < 32; reg++) + UNPACK64(current->thread.evr[reg], ptr); +#else + ptr += 32; +#endif +#else + /* fp registers not used by kernel, leave zero */ + ptr += 32 * 8 / sizeof(int); +#endif + + UNPACK64(regs->nip, ptr); + UNPACK64(regs->msr, ptr); + UNPACK32(regs->ccr, ptr); + UNPACK64(regs->link, ptr); + UNPACK64(regs->ctr, ptr); + UNPACK32(regs->xer, ptr); + + BUG_ON((unsigned long)ptr > + (unsigned long)(((void *)gdb_regs) + NUMREGBYTES)); +} + +/* + * This function does PowerPC specific procesing for interfacing to gdb. + */ +int kgdb_arch_handle_exception(int vector, int signo, int err_code, + char *remcom_in_buffer, char *remcom_out_buffer, + struct pt_regs *linux_regs) +{ + char *ptr = &remcom_in_buffer[1]; + unsigned long addr; + + switch (remcom_in_buffer[0]) { + /* + * sAA..AA Step one instruction from AA..AA + * This will return an error to gdb .. + */ + case 's': + case 'c': + /* handle the optional parameter */ + if (kgdb_hex2long(&ptr, &addr)) + linux_regs->nip = addr; + + atomic_set(&kgdb_cpu_doing_single_step, -1); + /* set the trace bit if we're stepping */ + if (remcom_in_buffer[0] == 's') { +#if defined(CONFIG_40x) || defined(CONFIG_BOOKE) + mtspr(SPRN_DBCR0, + mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM); + linux_regs->msr |= MSR_DE; +#else + linux_regs->msr |= MSR_SE; +#endif + kgdb_single_step = 1; + if (kgdb_contthread) + atomic_set(&kgdb_cpu_doing_single_step, + raw_smp_processor_id()); + } + return 0; + } + + return -1; +} + +/* + * Global data + */ +struct kgdb_arch arch_kgdb_ops = { + .gdb_bpt_instr = {0x7d, 0x82, 0x10, 0x08}, +}; + +static int kgdb_not_implemented(struct pt_regs *regs) +{ + return 0; +} + +static void *old__debugger_ipi; +static void *old__debugger; +static void *old__debugger_bpt; +static void *old__debugger_sstep; +static void *old__debugger_iabr_match; +static void *old__debugger_dabr_match; +static void *old__debugger_fault_handler; + +int kgdb_arch_init(void) +{ + old__debugger_ipi = __debugger_ipi; + old__debugger = __debugger; + old__debugger_bpt = __debugger_bpt; + old__debugger_sstep = __debugger_sstep; + old__debugger_iabr_match = __debugger_iabr_match; + old__debugger_dabr_match = __debugger_dabr_match; + old__debugger_fault_handler = __debugger_fault_handler; + + __debugger_ipi = kgdb_call_nmi_hook; + __debugger = kgdb_debugger; + __debugger_bpt = kgdb_handle_breakpoint; + __debugger_sstep = kgdb_singlestep; + __debugger_iabr_match = kgdb_iabr_match; + __debugger_dabr_match = kgdb_dabr_match; + __debugger_fault_handler = kgdb_not_implemented; + + return 0; +} + +void kgdb_arch_exit(void) +{ + __debugger_ipi = old__debugger_ipi; + __debugger = old__debugger; + __debugger_bpt = old__debugger_bpt; + __debugger_sstep = old__debugger_sstep; + __debugger_iabr_match = old__debugger_iabr_match; + __debugger_dabr_match = old__debugger_dabr_match; + __debugger_fault_handler = old__debugger_fault_handler; +} diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 4efebe88e64..066e65c59b5 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -43,10 +43,6 @@ #define DBG(fmt...) -#if defined CONFIG_KGDB -#include -#endif - extern void bootx_init(unsigned long r4, unsigned long phys); int boot_cpuid; @@ -302,18 +298,6 @@ void __init setup_arch(char **cmdline_p) xmon_setup(); -#if defined(CONFIG_KGDB) - if (ppc_md.kgdb_map_scc) - ppc_md.kgdb_map_scc(); - set_debug_traps(); - if (strstr(cmd_line, "gdb")) { - if (ppc_md.progress) - ppc_md.progress("setup_arch: kgdb breakpoint", 0x4000); - printk("kgdb breakpoint activated\n"); - breakpoint(); - } -#endif - /* * Set cache line size based on type of cpu as a default. * Systems with OF can look in the properties on the cpu node(s) diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 00bd0166d07..31635446901 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -97,8 +97,6 @@ extern struct machdep_calls pmac_md; int sccdbg; #endif -extern void zs_kgdb_hook(int tty_num); - sys_ctrler_t sys_ctrler = SYS_CTRLER_UNKNOWN; EXPORT_SYMBOL(sys_ctrler); @@ -329,10 +327,6 @@ static void __init pmac_setup_arch(void) l2cr_init(); #endif /* CONFIG_PPC32 */ -#ifdef CONFIG_KGDB - zs_kgdb_hook(0); -#endif - find_via_cuda(); find_via_pmu(); smu_init(); -- cgit v1.2.3 From 0855b543222e79cbbd9d66dd56cb54740e7d524f Mon Sep 17 00:00:00 2001 From: Andre Detsch Date: Thu, 24 Jul 2008 10:57:26 +1000 Subject: powerpc/spufs: fix aff_mutex and cbe_spu_info[n].list_mutex deadlock Currenlt,, it is possible to lock aff_mutex and cbe_spu_info[n].list_mutex in different orders, allowing a deadlock to occur. With this change, aff_mutex is not taken within a list_mutex critical section anymore. Signed-off-by: Andre Detsch Signed-off-by: Jeremy Kerr --- arch/powerpc/platforms/cell/spufs/sched.c | 18 ++++++------------ 1 file changed, 6 insertions(+), 12 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 34654743363..f293963cd85 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -389,6 +389,9 @@ static int has_affinity(struct spu_context *ctx) if (list_empty(&ctx->aff_list)) return 0; + if (atomic_read(&ctx->gang->aff_sched_count) == 0) + ctx->gang->aff_ref_spu = NULL; + if (!gang->aff_ref_spu) { if (!(gang->aff_flags & AFF_MERGED)) aff_merge_remaining_ctxs(gang); @@ -416,14 +419,8 @@ static void spu_unbind_context(struct spu *spu, struct spu_context *ctx) if (spu->ctx->flags & SPU_CREATE_NOSCHED) atomic_dec(&cbe_spu_info[spu->node].reserved_spus); - if (ctx->gang){ - mutex_lock(&ctx->gang->aff_mutex); - if (has_affinity(ctx)) { - if (atomic_dec_and_test(&ctx->gang->aff_sched_count)) - ctx->gang->aff_ref_spu = NULL; - } - mutex_unlock(&ctx->gang->aff_mutex); - } + if (ctx->gang) + atomic_dec_if_positive(&ctx->gang->aff_sched_count); spu_switch_notify(spu, NULL); spu_unmap_mappings(ctx); @@ -562,10 +559,7 @@ static struct spu *spu_get_idle(struct spu_context *ctx) goto found; mutex_unlock(&cbe_spu_info[node].list_mutex); - mutex_lock(&ctx->gang->aff_mutex); - if (atomic_dec_and_test(&ctx->gang->aff_sched_count)) - ctx->gang->aff_ref_spu = NULL; - mutex_unlock(&ctx->gang->aff_mutex); + atomic_dec(&ctx->gang->aff_sched_count); goto not_found; } mutex_unlock(&ctx->gang->aff_mutex); -- cgit v1.2.3 From ad1ede127760d6ca4903f44dfe1a8a38b3bfb36c Mon Sep 17 00:00:00 2001 From: Andre Detsch Date: Thu, 24 Jul 2008 11:01:54 +1000 Subject: powerpc/spufs: better placement of spu affinity reference context This patch adjusts the placement of a reference context from a spu affinity chain. The reference context can now be placed only on nodes that have enough spus not intended to be used by another gang (already running on the node). Signed-off-by: Andre Detsch Signed-off-by: Jeremy Kerr --- arch/powerpc/platforms/cell/spufs/sched.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index f293963cd85..2deeeba7ecc 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -312,10 +312,27 @@ static struct spu *aff_ref_location(struct spu_context *ctx, int mem_aff, */ node = cpu_to_node(raw_smp_processor_id()); for (n = 0; n < MAX_NUMNODES; n++, node++) { + int available_spus; + node = (node < MAX_NUMNODES) ? node : 0; if (!node_allowed(ctx, node)) continue; + + available_spus = 0; mutex_lock(&cbe_spu_info[node].list_mutex); + list_for_each_entry(spu, &cbe_spu_info[node].spus, cbe_list) { + if (spu->ctx && spu->ctx->gang + && spu->ctx->aff_offset == 0) + available_spus -= + (spu->ctx->gang->contexts - 1); + else + available_spus++; + } + if (available_spus < ctx->gang->contexts) { + mutex_unlock(&cbe_spu_info[node].list_mutex); + continue; + } + list_for_each_entry(spu, &cbe_spu_info[node].spus, cbe_list) { if ((!mem_aff || spu->has_mem_affinity) && sched_spu(spu)) { -- cgit v1.2.3 From 9483a578df27fe7603605d565eefe039c1ba5845 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 23 Jul 2008 21:26:48 -0700 Subject: add HAVE_CLK to Kconfig, for driver dependencies Flag platforms as HAVE_CLK (or not) in Kconfig, based on whether they support calls, so that otherwise portable drivers which need those calls can list that dependency. Something like this is a prerequisite for merging the musb_hdrc driver, currently used on platforms including Davinci, OMAP2430, OMAP3xx ... and the discrete TUSB6010 chip, which doesn't have a natural platform dependency. (Used with OMAP 2420 in current Nokia N8x0 tablets.) Signed-off-by: David Brownell Cc: Russell King Acked-by: Haavard Skinnemoen Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Paul Mundt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 737ebf9d12b..4d7e2ba10ba 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -843,6 +843,7 @@ source "crypto/Kconfig" config PPC_CLOCK bool default n + select HAVE_CLK config PPC_LIB_RHEAP bool -- cgit v1.2.3 From b61bfa3c462671c48a51fb5c31af337c5a996a04 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Wed, 23 Jul 2008 21:26:55 -0700 Subject: mm: move bootmem descriptors definition to a single place There are a lot of places that define either a single bootmem descriptor or an array of them. Use only one central array with MAX_NUMNODES items instead. Signed-off-by: Johannes Weiner Acked-by: Ralf Baechle Cc: Ingo Molnar Cc: Richard Henderson Cc: Russell King Cc: Tony Luck Cc: Hirokazu Takata Cc: Geert Uytterhoeven Cc: Kyle McMartin Cc: Paul Mackerras Cc: Paul Mundt Cc: David S. Miller Cc: Yinghai Lu Cc: Christoph Lameter Cc: Mel Gorman Cc: Andy Whitcroft Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/mm/numa.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index cf4bffba6f7..d9a18135133 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -39,7 +39,6 @@ EXPORT_SYMBOL(numa_cpu_lookup_table); EXPORT_SYMBOL(numa_cpumask_lookup_table); EXPORT_SYMBOL(node_data); -static bootmem_data_t __initdata plat_node_bdata[MAX_NUMNODES]; static int min_common_depth; static int n_mem_addr_cells, n_mem_size_cells; @@ -816,7 +815,7 @@ void __init do_init_bootmem(void) dbg("node %d\n", nid); dbg("NODE_DATA() = %p\n", NODE_DATA(nid)); - NODE_DATA(nid)->bdata = &plat_node_bdata[nid]; + NODE_DATA(nid)->bdata = &bootmem_node_data[nid]; NODE_DATA(nid)->node_start_pfn = start_pfn; NODE_DATA(nid)->node_spanned_pages = end_pfn - start_pfn; -- cgit v1.2.3 From a1f242ff460e4b50a045fa237c3c56cce9eabf83 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 23 Jul 2008 21:27:08 -0700 Subject: powerpc ioremap_prot This adds ioremap_prot and pte_pgprot() so that one can extract protection bits from a PTE and use them to ioremap_prot() (in order to support ptrace of VM_IO | VM_PFNMAP as per Rik's patch). This moves a couple of flag checks around in the ioremap implementations of arch/powerpc. There's a side effect of allowing non-cacheable and non-guarded mappings on ppc32 which before would always have _PAGE_GUARDED set whenever _PAGE_NO_CACHE is. (standard ioremap will still set _PAGE_GUARDED, but ioremap_prot will be capable of setting such a non guarded mapping). Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Rik van Riel Cc: Dave Airlie Cc: Hugh Dickins Cc: Paul Mackerras Cc: Arnd Bergmann Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/Kconfig | 1 + arch/powerpc/mm/pgtable_32.c | 22 ++++++++++++++++------ arch/powerpc/mm/pgtable_64.c | 16 ++++++++++++++++ 3 files changed, 33 insertions(+), 6 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 4d7e2ba10ba..a487671c282 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -111,6 +111,7 @@ config PPC select HAVE_DYNAMIC_FTRACE select HAVE_FTRACE select HAVE_IDE + select HAVE_IOREMAP_PROT select HAVE_KPROBES select HAVE_ARCH_KGDB select HAVE_KRETPROBES diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c index c7584072dfc..2001abdb191 100644 --- a/arch/powerpc/mm/pgtable_32.c +++ b/arch/powerpc/mm/pgtable_32.c @@ -145,13 +145,20 @@ void pte_free(struct mm_struct *mm, pgtable_t ptepage) void __iomem * ioremap(phys_addr_t addr, unsigned long size) { - return __ioremap(addr, size, _PAGE_NO_CACHE); + return __ioremap(addr, size, _PAGE_NO_CACHE | _PAGE_GUARDED); } EXPORT_SYMBOL(ioremap); void __iomem * ioremap_flags(phys_addr_t addr, unsigned long size, unsigned long flags) { + /* writeable implies dirty for kernel addresses */ + if (flags & _PAGE_RW) + flags |= _PAGE_DIRTY | _PAGE_HWWRITE; + + /* we don't want to let _PAGE_USER and _PAGE_EXEC leak out */ + flags &= ~(_PAGE_USER | _PAGE_EXEC | _PAGE_HWEXEC); + return __ioremap(addr, size, flags); } EXPORT_SYMBOL(ioremap_flags); @@ -163,6 +170,14 @@ __ioremap(phys_addr_t addr, unsigned long size, unsigned long flags) phys_addr_t p; int err; + /* Make sure we have the base flags */ + if ((flags & _PAGE_PRESENT) == 0) + flags |= _PAGE_KERNEL; + + /* Non-cacheable page cannot be coherent */ + if (flags & _PAGE_NO_CACHE) + flags &= ~_PAGE_COHERENT; + /* * Choose an address to map it to. * Once the vmalloc system is running, we use it. @@ -219,11 +234,6 @@ __ioremap(phys_addr_t addr, unsigned long size, unsigned long flags) v = (ioremap_bot -= size); } - if ((flags & _PAGE_PRESENT) == 0) - flags |= _PAGE_KERNEL; - if (flags & _PAGE_NO_CACHE) - flags |= _PAGE_GUARDED; - /* * Should check if it is a candidate for a BAT mapping */ diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c index 3ef0ad2f9ca..365e61ae5db 100644 --- a/arch/powerpc/mm/pgtable_64.c +++ b/arch/powerpc/mm/pgtable_64.c @@ -107,9 +107,18 @@ void __iomem * __ioremap_at(phys_addr_t pa, void *ea, unsigned long size, { unsigned long i; + /* Make sure we have the base flags */ if ((flags & _PAGE_PRESENT) == 0) flags |= pgprot_val(PAGE_KERNEL); + /* Non-cacheable page cannot be coherent */ + if (flags & _PAGE_NO_CACHE) + flags &= ~_PAGE_COHERENT; + + /* We don't support the 4K PFN hack with ioremap */ + if (flags & _PAGE_4K_PFN) + return NULL; + WARN_ON(pa & ~PAGE_MASK); WARN_ON(((unsigned long)ea) & ~PAGE_MASK); WARN_ON(size & ~PAGE_MASK); @@ -190,6 +199,13 @@ void __iomem * ioremap(phys_addr_t addr, unsigned long size) void __iomem * ioremap_flags(phys_addr_t addr, unsigned long size, unsigned long flags) { + /* writeable implies dirty for kernel addresses */ + if (flags & _PAGE_RW) + flags |= _PAGE_DIRTY; + + /* we don't want to let _PAGE_USER and _PAGE_EXEC leak out */ + flags &= ~(_PAGE_USER | _PAGE_EXEC); + if (ppc_md.ioremap) return ppc_md.ioremap(addr, size, flags); return __ioremap(addr, size, flags); -- cgit v1.2.3 From a352894d07059649398c4769dc8b645e1a1dad88 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 23 Jul 2008 21:27:09 -0700 Subject: spufs: use new vm_ops->access to allow local state access from gdb This uses the new vm_ops->access to allow gdb to access the SPU local store. We currently prevent access to problem state registers, this can be done later if really needed but it's safer not to. [akpm@linux-foundation.org: fix typo] Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Rik van Riel Cc: Dave Airlie Cc: Hugh Dickins Cc: Paul Mackerras Cc: Arnd Bergmann Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/platforms/cell/spufs/file.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index 99c73066b82..010a51f5979 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -288,9 +288,32 @@ spufs_mem_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf) return VM_FAULT_NOPAGE; } +static int spufs_mem_mmap_access(struct vm_area_struct *vma, + unsigned long address, + void *buf, int len, int write) +{ + struct spu_context *ctx = vma->vm_file->private_data; + unsigned long offset = address - vma->vm_start; + char *local_store; + + if (write && !(vma->vm_flags & VM_WRITE)) + return -EACCES; + if (spu_acquire(ctx)) + return -EINTR; + if ((offset + len) > vma->vm_end) + len = vma->vm_end - offset; + local_store = ctx->ops->get_ls(ctx); + if (write) + memcpy_toio(local_store + offset, buf, len); + else + memcpy_fromio(buf, local_store + offset, len); + spu_release(ctx); + return len; +} static struct vm_operations_struct spufs_mem_mmap_vmops = { .fault = spufs_mem_mmap_fault, + .access = spufs_mem_mmap_access, }; static int spufs_mem_mmap(struct file *file, struct vm_area_struct *vma) -- cgit v1.2.3 From 42b7772812d15b86543a23b82bd6070eef9a08b1 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 23 Jul 2008 21:27:10 -0700 Subject: mm: remove double indirection on tlb parameter to free_pgd_range() & Co The double indirection here is not needed anywhere and hence (at least) confusing. Signed-off-by: Jan Beulich Cc: Hugh Dickins Cc: Nick Piggin Cc: Christoph Lameter Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: "Luck, Tony" Cc: Paul Mundt Cc: "David S. Miller" Acked-by: Jeremy Fitzhardinge Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/mm/hugetlbpage.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 0d12fba31bc..1a96cc891cf 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -255,7 +255,7 @@ static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd, * * Must be called with pagetable lock held. */ -void hugetlb_free_pgd_range(struct mmu_gather **tlb, +void hugetlb_free_pgd_range(struct mmu_gather *tlb, unsigned long addr, unsigned long end, unsigned long floor, unsigned long ceiling) { @@ -315,13 +315,13 @@ void hugetlb_free_pgd_range(struct mmu_gather **tlb, return; start = addr; - pgd = pgd_offset((*tlb)->mm, addr); + pgd = pgd_offset(tlb->mm, addr); do { - BUG_ON(get_slice_psize((*tlb)->mm, addr) != mmu_huge_psize); + BUG_ON(get_slice_psize(tlb->mm, addr) != mmu_huge_psize); next = pgd_addr_end(addr, end); if (pgd_none_or_clear_bad(pgd)) continue; - hugetlb_free_pud_range(*tlb, pgd, addr, next, floor, ceiling); + hugetlb_free_pud_range(tlb, pgd, addr, next, floor, ceiling); } while (pgd++, addr = next, addr != end); } -- cgit v1.2.3 From a5516438959d90b071ff0a484ce4f3f523dc3152 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Wed, 23 Jul 2008 21:27:41 -0700 Subject: hugetlb: modular state for hugetlb page size The goal of this patchset is to support multiple hugetlb page sizes. This is achieved by introducing a new struct hstate structure, which encapsulates the important hugetlb state and constants (eg. huge page size, number of huge pages currently allocated, etc). The hstate structure is then passed around the code which requires these fields, they will do the right thing regardless of the exact hstate they are operating on. This patch adds the hstate structure, with a single global instance of it (default_hstate), and does the basic work of converting hugetlb to use the hstate. Future patches will add more hstate structures to allow for different hugetlbfs mounts to have different page sizes. [akpm@linux-foundation.org: coding-style fixes] Acked-by: Adam Litke Acked-by: Nishanth Aravamudan Signed-off-by: Andi Kleen Signed-off-by: Nick Piggin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/mm/hugetlbpage.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 1a96cc891cf..c94dc71af98 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -128,7 +128,8 @@ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) return NULL; } -pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr) +pte_t *huge_pte_alloc(struct mm_struct *mm, + unsigned long addr, unsigned long sz) { pgd_t *pg; pud_t *pu; -- cgit v1.2.3 From ceb868796181dc95ea01a110e123afd391639873 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Wed, 23 Jul 2008 21:27:50 -0700 Subject: hugetlb: introduce pud_huge Straight forward extensions for huge pages located in the PUD instead of PMDs. Signed-off-by: Andi Kleen Signed-off-by: Nick Piggin Cc: Martin Schwidefsky Cc: Heiko Carstens Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/mm/hugetlbpage.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index c94dc71af98..63db7adce71 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -369,6 +369,11 @@ int pmd_huge(pmd_t pmd) return 0; } +int pud_huge(pud_t pud) +{ + return 0; +} + struct page * follow_huge_pmd(struct mm_struct *mm, unsigned long address, pmd_t *pmd, int write) -- cgit v1.2.3 From ec4b2c0c8312d1118c2acd00c89988ecf955d5cc Mon Sep 17 00:00:00 2001 From: Jon Tollefson Date: Wed, 23 Jul 2008 21:27:53 -0700 Subject: powerpc: function to allocate gigantic hugepages The 16G page locations have been saved during early boot in an array. The alloc_bootmem_huge_page() function adds a page from here to the huge_boot_pages list. Acked-by: Adam Litke Signed-off-by: Jon Tollefson Signed-off-by: Nick Piggin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/mm/hugetlbpage.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 63db7adce71..5df82186fc9 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -29,6 +29,12 @@ #define NUM_LOW_AREAS (0x100000000UL >> SID_SHIFT) #define NUM_HIGH_AREAS (PGTABLE_RANGE >> HTLB_AREA_SHIFT) +#define MAX_NUMBER_GPAGES 1024 + +/* Tracks the 16G pages after the device tree is scanned and before the + * huge_boot_pages list is ready. */ +static unsigned long gpage_freearray[MAX_NUMBER_GPAGES]; +static unsigned nr_gpages; unsigned int hugepte_shift; #define PTRS_PER_HUGEPTE (1 << hugepte_shift) @@ -104,6 +110,21 @@ pmd_t *hpmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long addr) } #endif +/* Moves the gigantic page addresses from the temporary list to the + * huge_boot_pages list. */ +int alloc_bootmem_huge_page(struct hstate *h) +{ + struct huge_bootmem_page *m; + if (nr_gpages == 0) + return 0; + m = phys_to_virt(gpage_freearray[--nr_gpages]); + gpage_freearray[nr_gpages] = 0; + list_add(&m->list, &huge_boot_pages); + m->hstate = h; + return 1; +} + + /* Modelled after find_linux_pte() */ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) { -- cgit v1.2.3 From 658013e93eb70494f7300bc90457b09a807232a4 Mon Sep 17 00:00:00 2001 From: Jon Tollefson Date: Wed, 23 Jul 2008 21:27:54 -0700 Subject: powerpc: scan device tree for gigantic pages The 16G huge pages have to be reserved in the HMC prior to boot. The location of the pages are placed in the device tree. This patch adds code to scan the device tree during very early boot and save these page locations until hugetlbfs is ready for them. Acked-by: Adam Litke Signed-off-by: Jon Tollefson Signed-off-by: Nick Piggin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/mm/hash_utils_64.c | 44 ++++++++++++++++++++++++++++++++++++++++- arch/powerpc/mm/hugetlbpage.c | 16 +++++++++++++++ 2 files changed, 59 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 8d3b58ebd38..ae4c717243a 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -68,6 +68,7 @@ #define KB (1024) #define MB (1024*KB) +#define GB (1024L*MB) /* * Note: pte --> Linux PTE @@ -329,6 +330,44 @@ static int __init htab_dt_scan_page_sizes(unsigned long node, return 0; } +/* Scan for 16G memory blocks that have been set aside for huge pages + * and reserve those blocks for 16G huge pages. + */ +static int __init htab_dt_scan_hugepage_blocks(unsigned long node, + const char *uname, int depth, + void *data) { + char *type = of_get_flat_dt_prop(node, "device_type", NULL); + unsigned long *addr_prop; + u32 *page_count_prop; + unsigned int expected_pages; + long unsigned int phys_addr; + long unsigned int block_size; + + /* We are scanning "memory" nodes only */ + if (type == NULL || strcmp(type, "memory") != 0) + return 0; + + /* This property is the log base 2 of the number of virtual pages that + * will represent this memory block. */ + page_count_prop = of_get_flat_dt_prop(node, "ibm,expected#pages", NULL); + if (page_count_prop == NULL) + return 0; + expected_pages = (1 << page_count_prop[0]); + addr_prop = of_get_flat_dt_prop(node, "reg", NULL); + if (addr_prop == NULL) + return 0; + phys_addr = addr_prop[0]; + block_size = addr_prop[1]; + if (block_size != (16 * GB)) + return 0; + printk(KERN_INFO "Huge page(16GB) memory: " + "addr = 0x%lX size = 0x%lX pages = %d\n", + phys_addr, block_size, expected_pages); + lmb_reserve(phys_addr, block_size * expected_pages); + add_gpage(phys_addr, block_size, expected_pages); + return 0; +} + static void __init htab_init_page_sizes(void) { int rc; @@ -418,7 +457,10 @@ static void __init htab_init_page_sizes(void) ); #ifdef CONFIG_HUGETLB_PAGE - /* Init large page size. Currently, we pick 16M or 1M depending + /* Reserve 16G huge page memory sections for huge pages */ + of_scan_flat_dt(htab_dt_scan_hugepage_blocks, NULL); + +/* Init large page size. Currently, we pick 16M or 1M depending * on what is available */ if (mmu_psize_defs[MMU_PAGE_16M].shift) diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 5df82186fc9..e2a650a9e53 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -110,6 +110,22 @@ pmd_t *hpmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long addr) } #endif +/* Build list of addresses of gigantic pages. This function is used in early + * boot before the buddy or bootmem allocator is setup. + */ +void add_gpage(unsigned long addr, unsigned long page_size, + unsigned long number_of_pages) +{ + if (!addr) + return; + while (number_of_pages > 0) { + gpage_freearray[nr_gpages] = addr; + nr_gpages++; + number_of_pages--; + addr += page_size; + } +} + /* Moves the gigantic page addresses from the temporary list to the * huge_boot_pages list. */ int alloc_bootmem_huge_page(struct hstate *h) -- cgit v1.2.3 From 91224346aa8c1cdaa660300a98e0b074a3a95030 Mon Sep 17 00:00:00 2001 From: Jon Tollefson Date: Wed, 23 Jul 2008 21:27:55 -0700 Subject: powerpc: define support for 16G hugepages The huge page size is defined for 16G pages. If a hugepagesz of 16G is specified at boot-time then it becomes the huge page size instead of the default 16M. The change in pgtable-64K.h is to the macro pte_iterate_hashed_subpages to make the increment to va (the 1 being shifted) be a long so that it is not shifted to 0. Otherwise it would create an infinite loop when the shift value is for a 16G page (when base page size is 64K). Signed-off-by: Jon Tollefson Signed-off-by: Nick Piggin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/mm/hugetlbpage.c | 62 ++++++++++++++++++++++++++++++------------- 1 file changed, 44 insertions(+), 18 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index e2a650a9e53..19b1a9cec6d 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -24,8 +24,9 @@ #include #include -#define HPAGE_SHIFT_64K 16 -#define HPAGE_SHIFT_16M 24 +#define PAGE_SHIFT_64K 16 +#define PAGE_SHIFT_16M 24 +#define PAGE_SHIFT_16G 34 #define NUM_LOW_AREAS (0x100000000UL >> SID_SHIFT) #define NUM_HIGH_AREAS (PGTABLE_RANGE >> HTLB_AREA_SHIFT) @@ -95,7 +96,7 @@ static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp, static inline pmd_t *hpmd_offset(pud_t *pud, unsigned long addr) { - if (HPAGE_SHIFT == HPAGE_SHIFT_64K) + if (HPAGE_SHIFT == PAGE_SHIFT_64K) return pmd_offset(pud, addr); else return (pmd_t *) pud; @@ -103,7 +104,7 @@ pmd_t *hpmd_offset(pud_t *pud, unsigned long addr) static inline pmd_t *hpmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long addr) { - if (HPAGE_SHIFT == HPAGE_SHIFT_64K) + if (HPAGE_SHIFT == PAGE_SHIFT_64K) return pmd_alloc(mm, pud, addr); else return (pmd_t *) pud; @@ -260,7 +261,7 @@ static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd, continue; hugetlb_free_pmd_range(tlb, pud, addr, next, floor, ceiling); #else - if (HPAGE_SHIFT == HPAGE_SHIFT_64K) { + if (HPAGE_SHIFT == PAGE_SHIFT_64K) { if (pud_none_or_clear_bad(pud)) continue; hugetlb_free_pmd_range(tlb, pud, addr, next, floor, ceiling); @@ -592,20 +593,40 @@ void set_huge_psize(int psize) { /* Check that it is a page size supported by the hardware and * that it fits within pagetable limits. */ - if (mmu_psize_defs[psize].shift && mmu_psize_defs[psize].shift < SID_SHIFT && + if (mmu_psize_defs[psize].shift && + mmu_psize_defs[psize].shift < SID_SHIFT_1T && (mmu_psize_defs[psize].shift > MIN_HUGEPTE_SHIFT || - mmu_psize_defs[psize].shift == HPAGE_SHIFT_64K)) { + mmu_psize_defs[psize].shift == PAGE_SHIFT_64K || + mmu_psize_defs[psize].shift == PAGE_SHIFT_16G)) { + /* Return if huge page size is the same as the + * base page size. */ + if (mmu_psize_defs[psize].shift == PAGE_SHIFT) + return; + HPAGE_SHIFT = mmu_psize_defs[psize].shift; mmu_huge_psize = psize; -#ifdef CONFIG_PPC_64K_PAGES - hugepte_shift = (PMD_SHIFT-HPAGE_SHIFT); -#else - if (HPAGE_SHIFT == HPAGE_SHIFT_64K) - hugepte_shift = (PMD_SHIFT-HPAGE_SHIFT); - else - hugepte_shift = (PUD_SHIFT-HPAGE_SHIFT); -#endif + switch (HPAGE_SHIFT) { + case PAGE_SHIFT_64K: + /* We only allow 64k hpages with 4k base page, + * which was checked above, and always put them + * at the PMD */ + hugepte_shift = PMD_SHIFT; + break; + case PAGE_SHIFT_16M: + /* 16M pages can be at two different levels + * of pagestables based on base page size */ + if (PAGE_SHIFT == PAGE_SHIFT_64K) + hugepte_shift = PMD_SHIFT; + else /* 4k base page */ + hugepte_shift = PUD_SHIFT; + break; + case PAGE_SHIFT_16G: + /* 16G pages are always at PGD level */ + hugepte_shift = PGDIR_SHIFT; + break; + } + hugepte_shift -= HPAGE_SHIFT; } else HPAGE_SHIFT = 0; } @@ -621,17 +642,22 @@ static int __init hugepage_setup_sz(char *str) shift = __ffs(size); switch (shift) { #ifndef CONFIG_PPC_64K_PAGES - case HPAGE_SHIFT_64K: + case PAGE_SHIFT_64K: mmu_psize = MMU_PAGE_64K; break; #endif - case HPAGE_SHIFT_16M: + case PAGE_SHIFT_16M: mmu_psize = MMU_PAGE_16M; break; + case PAGE_SHIFT_16G: + mmu_psize = MMU_PAGE_16G; + break; } - if (mmu_psize >=0 && mmu_psize_defs[mmu_psize].shift) + if (mmu_psize >= 0 && mmu_psize_defs[mmu_psize].shift) { set_huge_psize(mmu_psize); + hugetlb_add_hstate(shift - PAGE_SHIFT); + } else printk(KERN_WARNING "Invalid huge page size specified(%llu)\n", size); -- cgit v1.2.3 From 0d9ea75443dc7e37843e656b8ebc947a6d16d618 Mon Sep 17 00:00:00 2001 From: Jon Tollefson Date: Wed, 23 Jul 2008 21:27:56 -0700 Subject: powerpc: support multiple hugepage sizes Instead of using the variable mmu_huge_psize to keep track of the huge page size we use an array of MMU_PAGE_* values. For each supported huge page size we need to know the hugepte_shift value and have a pgtable_cache. The hstate or an mmu_huge_psizes index is passed to functions so that they know which huge page size they should use. The hugepage sizes 16M and 64K are setup(if available on the hardware) so that they don't have to be set on the boot cmd line in order to use them. The number of 16G pages have to be specified at boot-time though (e.g. hugepagesz=16G hugepages=5). Signed-off-by: Jon Tollefson Signed-off-by: Nick Piggin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/mm/hash_utils_64.c | 9 +- arch/powerpc/mm/hugetlbpage.c | 274 ++++++++++++++++++++++++++-------------- arch/powerpc/mm/init_64.c | 8 +- arch/powerpc/mm/tlb_64.c | 2 +- 4 files changed, 186 insertions(+), 107 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index ae4c717243a..5ce5a4dcd00 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -103,7 +103,6 @@ int mmu_kernel_ssize = MMU_SEGSIZE_256M; int mmu_highuser_ssize = MMU_SEGSIZE_256M; u16 mmu_slb_size = 64; #ifdef CONFIG_HUGETLB_PAGE -int mmu_huge_psize = MMU_PAGE_16M; unsigned int HPAGE_SHIFT; #endif #ifdef CONFIG_PPC_64K_PAGES @@ -460,15 +459,15 @@ static void __init htab_init_page_sizes(void) /* Reserve 16G huge page memory sections for huge pages */ of_scan_flat_dt(htab_dt_scan_hugepage_blocks, NULL); -/* Init large page size. Currently, we pick 16M or 1M depending +/* Set default large page size. Currently, we pick 16M or 1M depending * on what is available */ if (mmu_psize_defs[MMU_PAGE_16M].shift) - set_huge_psize(MMU_PAGE_16M); + HPAGE_SHIFT = mmu_psize_defs[MMU_PAGE_16M].shift; /* With 4k/4level pagetables, we can't (for now) cope with a * huge page size < PMD_SIZE */ else if (mmu_psize_defs[MMU_PAGE_1M].shift) - set_huge_psize(MMU_PAGE_1M); + HPAGE_SHIFT = mmu_psize_defs[MMU_PAGE_1M].shift; #endif /* CONFIG_HUGETLB_PAGE */ } @@ -889,7 +888,7 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) #ifdef CONFIG_HUGETLB_PAGE /* Handle hugepage regions */ - if (HPAGE_SHIFT && psize == mmu_huge_psize) { + if (HPAGE_SHIFT && mmu_huge_psizes[psize]) { DBG_LOW(" -> huge page !\n"); return hash_huge_page(mm, access, ea, vsid, local, trap); } diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 19b1a9cec6d..fb42c4dd321 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -37,15 +37,30 @@ static unsigned long gpage_freearray[MAX_NUMBER_GPAGES]; static unsigned nr_gpages; -unsigned int hugepte_shift; -#define PTRS_PER_HUGEPTE (1 << hugepte_shift) -#define HUGEPTE_TABLE_SIZE (sizeof(pte_t) << hugepte_shift) +/* Array of valid huge page sizes - non-zero value(hugepte_shift) is + * stored for the huge page sizes that are valid. + */ +unsigned int mmu_huge_psizes[MMU_PAGE_COUNT] = { }; /* initialize all to 0 */ + +#define hugepte_shift mmu_huge_psizes +#define PTRS_PER_HUGEPTE(psize) (1 << hugepte_shift[psize]) +#define HUGEPTE_TABLE_SIZE(psize) (sizeof(pte_t) << hugepte_shift[psize]) + +#define HUGEPD_SHIFT(psize) (mmu_psize_to_shift(psize) \ + + hugepte_shift[psize]) +#define HUGEPD_SIZE(psize) (1UL << HUGEPD_SHIFT(psize)) +#define HUGEPD_MASK(psize) (~(HUGEPD_SIZE(psize)-1)) -#define HUGEPD_SHIFT (HPAGE_SHIFT + hugepte_shift) -#define HUGEPD_SIZE (1UL << HUGEPD_SHIFT) -#define HUGEPD_MASK (~(HUGEPD_SIZE-1)) +/* Subtract one from array size because we don't need a cache for 4K since + * is not a huge page size */ +#define huge_pgtable_cache(psize) (pgtable_cache[HUGEPTE_CACHE_NUM \ + + psize-1]) +#define HUGEPTE_CACHE_NAME(psize) (huge_pgtable_cache_name[psize]) -#define huge_pgtable_cache (pgtable_cache[HUGEPTE_CACHE_NUM]) +static const char *huge_pgtable_cache_name[MMU_PAGE_COUNT] = { + "unused_4K", "hugepte_cache_64K", "unused_64K_AP", + "hugepte_cache_1M", "hugepte_cache_16M", "hugepte_cache_16G" +}; /* Flag to mark huge PD pointers. This means pmd_bad() and pud_bad() * will choke on pointers to hugepte tables, which is handy for @@ -56,24 +71,49 @@ typedef struct { unsigned long pd; } hugepd_t; #define hugepd_none(hpd) ((hpd).pd == 0) +static inline int shift_to_mmu_psize(unsigned int shift) +{ + switch (shift) { +#ifndef CONFIG_PPC_64K_PAGES + case PAGE_SHIFT_64K: + return MMU_PAGE_64K; +#endif + case PAGE_SHIFT_16M: + return MMU_PAGE_16M; + case PAGE_SHIFT_16G: + return MMU_PAGE_16G; + } + return -1; +} + +static inline unsigned int mmu_psize_to_shift(unsigned int mmu_psize) +{ + if (mmu_psize_defs[mmu_psize].shift) + return mmu_psize_defs[mmu_psize].shift; + BUG(); +} + static inline pte_t *hugepd_page(hugepd_t hpd) { BUG_ON(!(hpd.pd & HUGEPD_OK)); return (pte_t *)(hpd.pd & ~HUGEPD_OK); } -static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr) +static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr, + struct hstate *hstate) { - unsigned long idx = ((addr >> HPAGE_SHIFT) & (PTRS_PER_HUGEPTE-1)); + unsigned int shift = huge_page_shift(hstate); + int psize = shift_to_mmu_psize(shift); + unsigned long idx = ((addr >> shift) & (PTRS_PER_HUGEPTE(psize)-1)); pte_t *dir = hugepd_page(*hpdp); return dir + idx; } static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp, - unsigned long address) + unsigned long address, unsigned int psize) { - pte_t *new = kmem_cache_alloc(huge_pgtable_cache, + pte_t *new = kmem_cache_alloc(huge_pgtable_cache(psize), GFP_KERNEL|__GFP_REPEAT); if (! new) @@ -81,7 +121,7 @@ static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp, spin_lock(&mm->page_table_lock); if (!hugepd_none(*hpdp)) - kmem_cache_free(huge_pgtable_cache, new); + kmem_cache_free(huge_pgtable_cache(psize), new); else hpdp->pd = (unsigned long)new | HUGEPD_OK; spin_unlock(&mm->page_table_lock); @@ -90,21 +130,22 @@ static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp, /* Base page size affects how we walk hugetlb page tables */ #ifdef CONFIG_PPC_64K_PAGES -#define hpmd_offset(pud, addr) pmd_offset(pud, addr) -#define hpmd_alloc(mm, pud, addr) pmd_alloc(mm, pud, addr) +#define hpmd_offset(pud, addr, h) pmd_offset(pud, addr) +#define hpmd_alloc(mm, pud, addr, h) pmd_alloc(mm, pud, addr) #else static inline -pmd_t *hpmd_offset(pud_t *pud, unsigned long addr) +pmd_t *hpmd_offset(pud_t *pud, unsigned long addr, struct hstate *hstate) { - if (HPAGE_SHIFT == PAGE_SHIFT_64K) + if (huge_page_shift(hstate) == PAGE_SHIFT_64K) return pmd_offset(pud, addr); else return (pmd_t *) pud; } static inline -pmd_t *hpmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long addr) +pmd_t *hpmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long addr, + struct hstate *hstate) { - if (HPAGE_SHIFT == PAGE_SHIFT_64K) + if (huge_page_shift(hstate) == PAGE_SHIFT_64K) return pmd_alloc(mm, pud, addr); else return (pmd_t *) pud; @@ -128,8 +169,9 @@ void add_gpage(unsigned long addr, unsigned long page_size, } /* Moves the gigantic page addresses from the temporary list to the - * huge_boot_pages list. */ -int alloc_bootmem_huge_page(struct hstate *h) + * huge_boot_pages list. + */ +int alloc_bootmem_huge_page(struct hstate *hstate) { struct huge_bootmem_page *m; if (nr_gpages == 0) @@ -137,7 +179,7 @@ int alloc_bootmem_huge_page(struct hstate *h) m = phys_to_virt(gpage_freearray[--nr_gpages]); gpage_freearray[nr_gpages] = 0; list_add(&m->list, &huge_boot_pages); - m->hstate = h; + m->hstate = hstate; return 1; } @@ -149,17 +191,25 @@ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) pud_t *pu; pmd_t *pm; - BUG_ON(get_slice_psize(mm, addr) != mmu_huge_psize); + unsigned int psize; + unsigned int shift; + unsigned long sz; + struct hstate *hstate; + psize = get_slice_psize(mm, addr); + shift = mmu_psize_to_shift(psize); + sz = ((1UL) << shift); + hstate = size_to_hstate(sz); - addr &= HPAGE_MASK; + addr &= hstate->mask; pg = pgd_offset(mm, addr); if (!pgd_none(*pg)) { pu = pud_offset(pg, addr); if (!pud_none(*pu)) { - pm = hpmd_offset(pu, addr); + pm = hpmd_offset(pu, addr, hstate); if (!pmd_none(*pm)) - return hugepte_offset((hugepd_t *)pm, addr); + return hugepte_offset((hugepd_t *)pm, addr, + hstate); } } @@ -173,16 +223,20 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, pud_t *pu; pmd_t *pm; hugepd_t *hpdp = NULL; + struct hstate *hstate; + unsigned int psize; + hstate = size_to_hstate(sz); - BUG_ON(get_slice_psize(mm, addr) != mmu_huge_psize); + psize = get_slice_psize(mm, addr); + BUG_ON(!mmu_huge_psizes[psize]); - addr &= HPAGE_MASK; + addr &= hstate->mask; pg = pgd_offset(mm, addr); pu = pud_alloc(mm, pg, addr); if (pu) { - pm = hpmd_alloc(mm, pu, addr); + pm = hpmd_alloc(mm, pu, addr, hstate); if (pm) hpdp = (hugepd_t *)pm; } @@ -190,10 +244,10 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, if (! hpdp) return NULL; - if (hugepd_none(*hpdp) && __hugepte_alloc(mm, hpdp, addr)) + if (hugepd_none(*hpdp) && __hugepte_alloc(mm, hpdp, addr, psize)) return NULL; - return hugepte_offset(hpdp, addr); + return hugepte_offset(hpdp, addr, hstate); } int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep) @@ -201,19 +255,22 @@ int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep) return 0; } -static void free_hugepte_range(struct mmu_gather *tlb, hugepd_t *hpdp) +static void free_hugepte_range(struct mmu_gather *tlb, hugepd_t *hpdp, + unsigned int psize) { pte_t *hugepte = hugepd_page(*hpdp); hpdp->pd = 0; tlb->need_flush = 1; - pgtable_free_tlb(tlb, pgtable_free_cache(hugepte, HUGEPTE_CACHE_NUM, + pgtable_free_tlb(tlb, pgtable_free_cache(hugepte, + HUGEPTE_CACHE_NUM+psize-1, PGF_CACHENUM_MASK)); } static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud, unsigned long addr, unsigned long end, - unsigned long floor, unsigned long ceiling) + unsigned long floor, unsigned long ceiling, + unsigned int psize) { pmd_t *pmd; unsigned long next; @@ -225,7 +282,7 @@ static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud, next = pmd_addr_end(addr, end); if (pmd_none(*pmd)) continue; - free_hugepte_range(tlb, (hugepd_t *)pmd); + free_hugepte_range(tlb, (hugepd_t *)pmd, psize); } while (pmd++, addr = next, addr != end); start &= PUD_MASK; @@ -251,6 +308,9 @@ static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd, pud_t *pud; unsigned long next; unsigned long start; + unsigned int shift; + unsigned int psize = get_slice_psize(tlb->mm, addr); + shift = mmu_psize_to_shift(psize); start = addr; pud = pud_offset(pgd, addr); @@ -259,16 +319,18 @@ static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd, #ifdef CONFIG_PPC_64K_PAGES if (pud_none_or_clear_bad(pud)) continue; - hugetlb_free_pmd_range(tlb, pud, addr, next, floor, ceiling); + hugetlb_free_pmd_range(tlb, pud, addr, next, floor, ceiling, + psize); #else - if (HPAGE_SHIFT == PAGE_SHIFT_64K) { + if (shift == PAGE_SHIFT_64K) { if (pud_none_or_clear_bad(pud)) continue; - hugetlb_free_pmd_range(tlb, pud, addr, next, floor, ceiling); + hugetlb_free_pmd_range(tlb, pud, addr, next, floor, + ceiling, psize); } else { if (pud_none(*pud)) continue; - free_hugepte_range(tlb, (hugepd_t *)pud); + free_hugepte_range(tlb, (hugepd_t *)pud, psize); } #endif } while (pud++, addr = next, addr != end); @@ -336,27 +398,29 @@ void hugetlb_free_pgd_range(struct mmu_gather *tlb, * now has no other vmas using it, so can be freed, we don't * bother to round floor or end up - the tests don't need that. */ + unsigned int psize = get_slice_psize(tlb->mm, addr); - addr &= HUGEPD_MASK; + addr &= HUGEPD_MASK(psize); if (addr < floor) { - addr += HUGEPD_SIZE; + addr += HUGEPD_SIZE(psize); if (!addr) return; } if (ceiling) { - ceiling &= HUGEPD_MASK; + ceiling &= HUGEPD_MASK(psize); if (!ceiling) return; } if (end - 1 > ceiling - 1) - end -= HUGEPD_SIZE; + end -= HUGEPD_SIZE(psize); if (addr > end - 1) return; start = addr; pgd = pgd_offset(tlb->mm, addr); do { - BUG_ON(get_slice_psize(tlb->mm, addr) != mmu_huge_psize); + psize = get_slice_psize(tlb->mm, addr); + BUG_ON(!mmu_huge_psizes[psize]); next = pgd_addr_end(addr, end); if (pgd_none_or_clear_bad(pgd)) continue; @@ -373,7 +437,11 @@ void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, * necessary anymore if we make hpte_need_flush() get the * page size from the slices */ - pte_update(mm, addr & HPAGE_MASK, ptep, ~0UL, 1); + unsigned int psize = get_slice_psize(mm, addr); + unsigned int shift = mmu_psize_to_shift(psize); + unsigned long sz = ((1UL) << shift); + struct hstate *hstate = size_to_hstate(sz); + pte_update(mm, addr & hstate->mask, ptep, ~0UL, 1); } *ptep = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS); } @@ -390,14 +458,19 @@ follow_huge_addr(struct mm_struct *mm, unsigned long address, int write) { pte_t *ptep; struct page *page; + unsigned int mmu_psize = get_slice_psize(mm, address); - if (get_slice_psize(mm, address) != mmu_huge_psize) + /* Verify it is a huge page else bail. */ + if (!mmu_huge_psizes[mmu_psize]) return ERR_PTR(-EINVAL); ptep = huge_pte_offset(mm, address); page = pte_page(*ptep); - if (page) - page += (address % HPAGE_SIZE) / PAGE_SIZE; + if (page) { + unsigned int shift = mmu_psize_to_shift(mmu_psize); + unsigned long sz = ((1UL) << shift); + page += (address % sz) / PAGE_SIZE; + } return page; } @@ -425,15 +498,16 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr, unsigned long len, unsigned long pgoff, unsigned long flags) { - return slice_get_unmapped_area(addr, len, flags, - mmu_huge_psize, 1, 0); + struct hstate *hstate = hstate_file(file); + int mmu_psize = shift_to_mmu_psize(huge_page_shift(hstate)); + return slice_get_unmapped_area(addr, len, flags, mmu_psize, 1, 0); } /* * Called by asm hashtable.S for doing lazy icache flush */ static unsigned int hash_huge_page_do_lazy_icache(unsigned long rflags, - pte_t pte, int trap) + pte_t pte, int trap, unsigned long sz) { struct page *page; int i; @@ -446,7 +520,7 @@ static unsigned int hash_huge_page_do_lazy_icache(unsigned long rflags, /* page is dirty */ if (!test_bit(PG_arch_1, &page->flags) && !PageReserved(page)) { if (trap == 0x400) { - for (i = 0; i < (HPAGE_SIZE / PAGE_SIZE); i++) + for (i = 0; i < (sz / PAGE_SIZE); i++) __flush_dcache_icache(page_address(page+i)); set_bit(PG_arch_1, &page->flags); } else { @@ -462,11 +536,16 @@ int hash_huge_page(struct mm_struct *mm, unsigned long access, { pte_t *ptep; unsigned long old_pte, new_pte; - unsigned long va, rflags, pa; + unsigned long va, rflags, pa, sz; long slot; int err = 1; int ssize = user_segment_size(ea); + unsigned int mmu_psize; + int shift; + mmu_psize = get_slice_psize(mm, ea); + if (!mmu_huge_psizes[mmu_psize]) + goto out; ptep = huge_pte_offset(mm, ea); /* Search the Linux page table for a match with va */ @@ -509,30 +588,32 @@ int hash_huge_page(struct mm_struct *mm, unsigned long access, rflags = 0x2 | (!(new_pte & _PAGE_RW)); /* _PAGE_EXEC -> HW_NO_EXEC since it's inverted */ rflags |= ((new_pte & _PAGE_EXEC) ? 0 : HPTE_R_N); + shift = mmu_psize_to_shift(mmu_psize); + sz = ((1UL) << shift); if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE)) /* No CPU has hugepages but lacks no execute, so we * don't need to worry about that case */ rflags = hash_huge_page_do_lazy_icache(rflags, __pte(old_pte), - trap); + trap, sz); /* Check if pte already has an hpte (case 2) */ if (unlikely(old_pte & _PAGE_HASHPTE)) { /* There MIGHT be an HPTE for this pte */ unsigned long hash, slot; - hash = hpt_hash(va, HPAGE_SHIFT, ssize); + hash = hpt_hash(va, shift, ssize); if (old_pte & _PAGE_F_SECOND) hash = ~hash; slot = (hash & htab_hash_mask) * HPTES_PER_GROUP; slot += (old_pte & _PAGE_F_GIX) >> 12; - if (ppc_md.hpte_updatepp(slot, rflags, va, mmu_huge_psize, + if (ppc_md.hpte_updatepp(slot, rflags, va, mmu_psize, ssize, local) == -1) old_pte &= ~_PAGE_HPTEFLAGS; } if (likely(!(old_pte & _PAGE_HASHPTE))) { - unsigned long hash = hpt_hash(va, HPAGE_SHIFT, ssize); + unsigned long hash = hpt_hash(va, shift, ssize); unsigned long hpte_group; pa = pte_pfn(__pte(old_pte)) << PAGE_SHIFT; @@ -553,7 +634,7 @@ repeat: /* Insert into the hash table, primary slot */ slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags, 0, - mmu_huge_psize, ssize); + mmu_psize, ssize); /* Primary is full, try the secondary */ if (unlikely(slot == -1)) { @@ -561,7 +642,7 @@ repeat: HPTES_PER_GROUP) & ~0x7UL; slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags, HPTE_V_SECONDARY, - mmu_huge_psize, ssize); + mmu_psize, ssize); if (slot == -1) { if (mftb() & 0x1) hpte_group = ((hash & htab_hash_mask) * @@ -598,66 +679,50 @@ void set_huge_psize(int psize) (mmu_psize_defs[psize].shift > MIN_HUGEPTE_SHIFT || mmu_psize_defs[psize].shift == PAGE_SHIFT_64K || mmu_psize_defs[psize].shift == PAGE_SHIFT_16G)) { - /* Return if huge page size is the same as the - * base page size. */ - if (mmu_psize_defs[psize].shift == PAGE_SHIFT) + /* Return if huge page size has already been setup or is the + * same as the base page size. */ + if (mmu_huge_psizes[psize] || + mmu_psize_defs[psize].shift == PAGE_SHIFT) return; + hugetlb_add_hstate(mmu_psize_defs[psize].shift - PAGE_SHIFT); - HPAGE_SHIFT = mmu_psize_defs[psize].shift; - mmu_huge_psize = psize; - - switch (HPAGE_SHIFT) { + switch (mmu_psize_defs[psize].shift) { case PAGE_SHIFT_64K: /* We only allow 64k hpages with 4k base page, * which was checked above, and always put them * at the PMD */ - hugepte_shift = PMD_SHIFT; + hugepte_shift[psize] = PMD_SHIFT; break; case PAGE_SHIFT_16M: /* 16M pages can be at two different levels * of pagestables based on base page size */ if (PAGE_SHIFT == PAGE_SHIFT_64K) - hugepte_shift = PMD_SHIFT; + hugepte_shift[psize] = PMD_SHIFT; else /* 4k base page */ - hugepte_shift = PUD_SHIFT; + hugepte_shift[psize] = PUD_SHIFT; break; case PAGE_SHIFT_16G: /* 16G pages are always at PGD level */ - hugepte_shift = PGDIR_SHIFT; + hugepte_shift[psize] = PGDIR_SHIFT; break; } - hugepte_shift -= HPAGE_SHIFT; + hugepte_shift[psize] -= mmu_psize_defs[psize].shift; } else - HPAGE_SHIFT = 0; + hugepte_shift[psize] = 0; } static int __init hugepage_setup_sz(char *str) { unsigned long long size; - int mmu_psize = -1; + int mmu_psize; int shift; size = memparse(str, &str); shift = __ffs(size); - switch (shift) { -#ifndef CONFIG_PPC_64K_PAGES - case PAGE_SHIFT_64K: - mmu_psize = MMU_PAGE_64K; - break; -#endif - case PAGE_SHIFT_16M: - mmu_psize = MMU_PAGE_16M; - break; - case PAGE_SHIFT_16G: - mmu_psize = MMU_PAGE_16G; - break; - } - - if (mmu_psize >= 0 && mmu_psize_defs[mmu_psize].shift) { + mmu_psize = shift_to_mmu_psize(shift); + if (mmu_psize >= 0 && mmu_psize_defs[mmu_psize].shift) set_huge_psize(mmu_psize); - hugetlb_add_hstate(shift - PAGE_SHIFT); - } else printk(KERN_WARNING "Invalid huge page size specified(%llu)\n", size); @@ -672,16 +737,31 @@ static void zero_ctor(struct kmem_cache *cache, void *addr) static int __init hugetlbpage_init(void) { + unsigned int psize; + if (!cpu_has_feature(CPU_FTR_16M_PAGE)) return -ENODEV; - - huge_pgtable_cache = kmem_cache_create("hugepte_cache", - HUGEPTE_TABLE_SIZE, - HUGEPTE_TABLE_SIZE, - 0, - zero_ctor); - if (! huge_pgtable_cache) - panic("hugetlbpage_init(): could not create hugepte cache\n"); + /* Add supported huge page sizes. Need to change HUGE_MAX_HSTATE + * and adjust PTE_NONCACHE_NUM if the number of supported huge page + * sizes changes. + */ + set_huge_psize(MMU_PAGE_16M); + set_huge_psize(MMU_PAGE_64K); + set_huge_psize(MMU_PAGE_16G); + + for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) { + if (mmu_huge_psizes[psize]) { + huge_pgtable_cache(psize) = kmem_cache_create( + HUGEPTE_CACHE_NAME(psize), + HUGEPTE_TABLE_SIZE(psize), + HUGEPTE_TABLE_SIZE(psize), + 0, + zero_ctor); + if (!huge_pgtable_cache(psize)) + panic("hugetlbpage_init(): could not create %s"\ + "\n", HUGEPTE_CACHE_NAME(psize)); + } + } return 0; } diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index 6ef63caca68..a41bc5aa204 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -153,10 +153,10 @@ static const char *pgtable_cache_name[ARRAY_SIZE(pgtable_cache_size)] = { }; #ifdef CONFIG_HUGETLB_PAGE -/* Hugepages need one extra cache, initialized in hugetlbpage.c. We - * can't put into the tables above, because HPAGE_SHIFT is not compile - * time constant. */ -struct kmem_cache *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)+1]; +/* Hugepages need an extra cache per hugepagesize, initialized in + * hugetlbpage.c. We can't put into the tables above, because HPAGE_SHIFT + * is not compile time constant. */ +struct kmem_cache *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)+MMU_PAGE_COUNT]; #else struct kmem_cache *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)]; #endif diff --git a/arch/powerpc/mm/tlb_64.c b/arch/powerpc/mm/tlb_64.c index a01b5c608ff..409fcc7b63c 100644 --- a/arch/powerpc/mm/tlb_64.c +++ b/arch/powerpc/mm/tlb_64.c @@ -147,7 +147,7 @@ void hpte_need_flush(struct mm_struct *mm, unsigned long addr, */ if (huge) { #ifdef CONFIG_HUGETLB_PAGE - psize = mmu_huge_psize; + psize = get_slice_psize(mm, addr);; #else BUG(); psize = pte_pagesize_index(mm, addr, pte); /* shutup gcc */ -- cgit v1.2.3 From 27ac792ca0b0a1e7e65f20342260650516c95864 Mon Sep 17 00:00:00 2001 From: Andrea Righi Date: Wed, 23 Jul 2008 21:28:13 -0700 Subject: PAGE_ALIGN(): correctly handle 64-bit values on 32-bit architectures On 32-bit architectures PAGE_ALIGN() truncates 64-bit values to the 32-bit boundary. For example: u64 val = PAGE_ALIGN(size); always returns a value < 4GB even if size is greater than 4GB. The problem resides in PAGE_MASK definition (from include/asm-x86/page.h for example): #define PAGE_SHIFT 12 #define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT) #define PAGE_MASK (~(PAGE_SIZE-1)) ... #define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) The "~" is performed on a 32-bit value, so everything in "and" with PAGE_MASK greater than 4GB will be truncated to the 32-bit boundary. Using the ALIGN() macro seems to be the right way, because it uses typeof(addr) for the mask. Also move the PAGE_ALIGN() definitions out of include/asm-*/page.h in include/linux/mm.h. See also lkml discussion: http://lkml.org/lkml/2008/6/11/237 [akpm@linux-foundation.org: fix drivers/media/video/uvc/uvc_queue.c] [akpm@linux-foundation.org: fix v850] [akpm@linux-foundation.org: fix powerpc] [akpm@linux-foundation.org: fix arm] [akpm@linux-foundation.org: fix mips] [akpm@linux-foundation.org: fix drivers/media/video/pvrusb2/pvrusb2-dvb.c] [akpm@linux-foundation.org: fix drivers/mtd/maps/uclinux.c] [akpm@linux-foundation.org: fix powerpc] Signed-off-by: Andrea Righi Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/kernel/suspend.c | 1 + arch/powerpc/lib/code-patching.c | 1 + 2 files changed, 2 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/suspend.c b/arch/powerpc/kernel/suspend.c index 8cee5710754..6fc6328dc62 100644 --- a/arch/powerpc/kernel/suspend.c +++ b/arch/powerpc/kernel/suspend.c @@ -7,6 +7,7 @@ * Copyright (c) 2001 Patrick Mochel */ +#include #include /* References to section boundaries */ diff --git a/arch/powerpc/lib/code-patching.c b/arch/powerpc/lib/code-patching.c index 0559fe086eb..7c975d43e3f 100644 --- a/arch/powerpc/lib/code-patching.c +++ b/arch/powerpc/lib/code-patching.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include -- cgit v1.2.3 From 9115d13453dee22473a1e8cacc90a8d64a9c4bc9 Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Wed, 16 Jul 2008 09:58:51 +1000 Subject: powerpc: Enable AT_BASE_PLATFORM aux vector Stash the first platform string matched by identify_cpu() in powerpc_base_platform, and supply that to the ELF loader for the value of AT_BASE_PLATFORM. Signed-off-by: Nathan Lynch Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/cputable.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index b936a1dd0a5..25a052c1675 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -23,6 +23,9 @@ struct cpu_spec* cur_cpu_spec = NULL; EXPORT_SYMBOL(cur_cpu_spec); +/* The platform string corresponding to the real PVR */ +const char *powerpc_base_platform; + /* NOTE: * Unlike ppc32, ppc64 will only call this once for the boot CPU, it's * the responsibility of the appropriate CPU save/restore functions to @@ -1652,6 +1655,14 @@ struct cpu_spec * __init identify_cpu(unsigned long offset, unsigned int pvr) } else *t = *s; *PTRRELOC(&cur_cpu_spec) = &the_cpu_spec; + + /* + * Set the base platform string once; assumes + * we're called with real pvr first. + */ + if (powerpc_base_platform == NULL) + powerpc_base_platform = t->platform; + #if defined(CONFIG_PPC64) || defined(CONFIG_BOOKE) /* ppc64 and booke expect identify_cpu to also call * setup_cpu for that processor. I will consolidate -- cgit v1.2.3 From 00bf6e906156b07cd641fe154ad0efe78f989692 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Wed, 23 Jul 2008 10:44:58 +1000 Subject: powerpc: Fallout from sysdev API changes A struct sysdev_attribute * parameter was added to the show routine by commit 4a0b2b4dbe1335b8b9886ba3dc85a145d5d938ed "sysdev: Pass the attribute to the low level sysdev show/store function". This eliminates a warning: arch/powerpc/kernel/sysfs.c:538: warning: initialization from incompatible pointer type Signed-off-by: Stephen Rothwell Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/sysfs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index aba0ba95f06..800e5e9a087 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -529,7 +529,8 @@ static void register_nodes(void) #endif /* Only valid if CPU is present. */ -static ssize_t show_physical_id(struct sys_device *dev, char *buf) +static ssize_t show_physical_id(struct sys_device *dev, + struct sysdev_attribute *attr, char *buf) { struct cpu *cpu = container_of(dev, struct cpu, sysdev); -- cgit v1.2.3 From d6a61bfc06d6f2248f3e75f208d64e794082013c Mon Sep 17 00:00:00 2001 From: Luis Machado Date: Thu, 24 Jul 2008 02:10:41 +1000 Subject: powerpc: BookE hardware watchpoint support This patch implements support for HW based watchpoint via the DBSR_DAC (Data Address Compare) facility of the BookE processors. It does so by interfacing with the existing DABR breakpoint code and adding the necessary bits and pieces for the new bits to be properly set or cleared Signed-off-by: Luis Machado Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/entry_32.S | 6 ++-- arch/powerpc/kernel/process.c | 46 +++++++++++++++++++++++++++ arch/powerpc/kernel/ptrace.c | 72 ++++++++++++++++++++++++++++++++++++++---- arch/powerpc/kernel/signal.c | 6 +++- arch/powerpc/kernel/traps.c | 16 ++++++++++ arch/powerpc/mm/fault.c | 25 --------------- 6 files changed, 136 insertions(+), 35 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index da52269aec1..81c8324a4a3 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -148,7 +148,7 @@ transfer_to_handler: /* Check to see if the dbcr0 register is set up to debug. Use the internal debug mode bit to do this. */ lwz r12,THREAD_DBCR0(r12) - andis. r12,r12,DBCR0_IDM@h + andis. r12,r12,(DBCR0_IDM | DBSR_DAC1R | DBSR_DAC1W)@h beq+ 3f /* From user and task is ptraced - load up global dbcr0 */ li r12,-1 /* clear all pending debug events */ @@ -292,7 +292,7 @@ syscall_exit_cont: /* If the process has its own DBCR0 value, load it up. The internal debug mode bit tells us that dbcr0 should be loaded. */ lwz r0,THREAD+THREAD_DBCR0(r2) - andis. r10,r0,DBCR0_IDM@h + andis. r10,r0,(DBCR0_IDM | DBSR_DAC1R | DBSR_DAC1W)@h bnel- load_dbcr0 #endif #ifdef CONFIG_44x @@ -720,7 +720,7 @@ restore_user: /* Check whether this process has its own DBCR0 value. The internal debug mode bit tells us that dbcr0 should be loaded. */ lwz r0,THREAD+THREAD_DBCR0(r2) - andis. r10,r0,DBCR0_IDM@h + andis. r10,r0,(DBCR0_IDM | DBSR_DAC1R | DBSR_DAC1W)@h bnel- load_dbcr0 #endif diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 219f3634115..db2497ccc11 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -47,6 +47,8 @@ #ifdef CONFIG_PPC64 #include #endif +#include +#include extern unsigned long _get_SP(void); @@ -239,6 +241,35 @@ void discard_lazy_cpu_state(void) } #endif /* CONFIG_SMP */ +void do_dabr(struct pt_regs *regs, unsigned long address, + unsigned long error_code) +{ + siginfo_t info; + + if (notify_die(DIE_DABR_MATCH, "dabr_match", regs, error_code, + 11, SIGSEGV) == NOTIFY_STOP) + return; + + if (debugger_dabr_match(regs)) + return; + + /* Clear the DAC and struct entries. One shot trigger */ +#if (defined(CONFIG_44x) || defined(CONFIG_BOOKE)) + mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~(DBSR_DAC1R | DBSR_DAC1W + | DBCR0_IDM)); +#endif + + /* Clear the DABR */ + set_dabr(0); + + /* Deliver the signal to userspace */ + info.si_signo = SIGTRAP; + info.si_errno = 0; + info.si_code = TRAP_HWBKPT; + info.si_addr = (void __user *)address; + force_sig_info(SIGTRAP, &info, current); +} + static DEFINE_PER_CPU(unsigned long, current_dabr); int set_dabr(unsigned long dabr) @@ -254,6 +285,11 @@ int set_dabr(unsigned long dabr) #if defined(CONFIG_PPC64) || defined(CONFIG_6xx) mtspr(SPRN_DABR, dabr); #endif + +#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) + mtspr(SPRN_DAC1, dabr); +#endif + return 0; } @@ -337,6 +373,12 @@ struct task_struct *__switch_to(struct task_struct *prev, if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr)) set_dabr(new->thread.dabr); +#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) + /* If new thread DAC (HW breakpoint) is the same then leave it */ + if (new->thread.dabr) + set_dabr(new->thread.dabr); +#endif + new_thread = &new->thread; old_thread = ¤t->thread; @@ -525,6 +567,10 @@ void flush_thread(void) if (current->thread.dabr) { current->thread.dabr = 0; set_dabr(0); + +#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) + current->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W); +#endif } } diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 8feb93e7890..a5d0e78779c 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -703,7 +703,7 @@ void user_enable_single_step(struct task_struct *task) if (regs != NULL) { #if defined(CONFIG_40x) || defined(CONFIG_BOOKE) - task->thread.dbcr0 = DBCR0_IDM | DBCR0_IC; + task->thread.dbcr0 |= DBCR0_IDM | DBCR0_IC; regs->msr |= MSR_DE; #else regs->msr |= MSR_SE; @@ -716,9 +716,16 @@ void user_disable_single_step(struct task_struct *task) { struct pt_regs *regs = task->thread.regs; + +#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) + /* If DAC then do not single step, skip */ + if (task->thread.dabr) + return; +#endif + if (regs != NULL) { #if defined(CONFIG_40x) || defined(CONFIG_BOOKE) - task->thread.dbcr0 = 0; + task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_IDM); regs->msr &= ~MSR_DE; #else regs->msr &= ~MSR_SE; @@ -727,22 +734,75 @@ void user_disable_single_step(struct task_struct *task) clear_tsk_thread_flag(task, TIF_SINGLESTEP); } -static int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, +int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, unsigned long data) { - /* We only support one DABR and no IABRS at the moment */ + /* For ppc64 we support one DABR and no IABR's at the moment (ppc64). + * For embedded processors we support one DAC and no IAC's at the + * moment. + */ if (addr > 0) return -EINVAL; - /* The bottom 3 bits are flags */ if ((data & ~0x7UL) >= TASK_SIZE) return -EIO; - /* Ensure translation is on */ +#ifdef CONFIG_PPC64 + + /* For processors using DABR (i.e. 970), the bottom 3 bits are flags. + * It was assumed, on previous implementations, that 3 bits were + * passed together with the data address, fitting the design of the + * DABR register, as follows: + * + * bit 0: Read flag + * bit 1: Write flag + * bit 2: Breakpoint translation + * + * Thus, we use them here as so. + */ + + /* Ensure breakpoint translation bit is set */ if (data && !(data & DABR_TRANSLATION)) return -EIO; + /* Move contents to the DABR register */ task->thread.dabr = data; + +#endif +#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) + + /* As described above, it was assumed 3 bits were passed with the data + * address, but we will assume only the mode bits will be passed + * as to not cause alignment restrictions for DAC-based processors. + */ + + /* DAC's hold the whole address without any mode flags */ + task->thread.dabr = data & ~0x3UL; + + if (task->thread.dabr == 0) { + task->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W | DBCR0_IDM); + task->thread.regs->msr &= ~MSR_DE; + return 0; + } + + /* Read or Write bits must be set */ + + if (!(data & 0x3UL)) + return -EINVAL; + + /* Set the Internal Debugging flag (IDM bit 1) for the DBCR0 + register */ + task->thread.dbcr0 = DBCR0_IDM; + + /* Check for write and read flags and set DBCR0 + accordingly */ + if (data & 0x1UL) + task->thread.dbcr0 |= DBSR_DAC1R; + if (data & 0x2UL) + task->thread.dbcr0 |= DBSR_DAC1W; + + task->thread.regs->msr |= MSR_DE; +#endif return 0; } diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c index ad55488939c..7aada783ec6 100644 --- a/arch/powerpc/kernel/signal.c +++ b/arch/powerpc/kernel/signal.c @@ -145,8 +145,12 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs) * user space. The DABR will have been cleared if it * triggered inside the kernel. */ - if (current->thread.dabr) + if (current->thread.dabr) { set_dabr(current->thread.dabr); +#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) + mtspr(SPRN_DBCR0, current->thread.dbcr0); +#endif + } if (is32) { if (ka.sa.sa_flags & SA_SIGINFO) diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 878fbddb6ae..81ccb8dd1a5 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -1067,6 +1067,22 @@ void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status) } _exception(SIGTRAP, regs, TRAP_TRACE, regs->nip); + } else if (debug_status & (DBSR_DAC1R | DBSR_DAC1W)) { + regs->msr &= ~MSR_DE; + + if (user_mode(regs)) { + current->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W | + DBCR0_IDM); + } else { + /* Disable DAC interupts */ + mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~(DBSR_DAC1R | + DBSR_DAC1W | DBCR0_IDM)); + + /* Clear the DAC event */ + mtspr(SPRN_DBSR, (DBSR_DAC1R | DBSR_DAC1W)); + } + /* Setup and send the trap to the handler */ + do_dabr(regs, mfspr(SPRN_DAC1), debug_status); } } #endif /* CONFIG_4xx || CONFIG_BOOKE */ diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c index 1707d00331f..565b7a237c8 100644 --- a/arch/powerpc/mm/fault.c +++ b/arch/powerpc/mm/fault.c @@ -100,31 +100,6 @@ static int store_updates_sp(struct pt_regs *regs) return 0; } -#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE)) -static void do_dabr(struct pt_regs *regs, unsigned long address, - unsigned long error_code) -{ - siginfo_t info; - - if (notify_die(DIE_DABR_MATCH, "dabr_match", regs, error_code, - 11, SIGSEGV) == NOTIFY_STOP) - return; - - if (debugger_dabr_match(regs)) - return; - - /* Clear the DABR */ - set_dabr(0); - - /* Deliver the signal to userspace */ - info.si_signo = SIGTRAP; - info.si_errno = 0; - info.si_code = TRAP_HWBKPT; - info.si_addr = (void __user *)address; - force_sig_info(SIGTRAP, &info, current); -} -#endif /* !(CONFIG_4xx || CONFIG_BOOKE)*/ - /* * For 600- and 800-family processors, the error_code parameter is DSISR * for a data fault, SRR1 for an instruction fault. For 400-family processors -- cgit v1.2.3 From 7886250e9d71b24d0205ac6798ee855fb3836318 Mon Sep 17 00:00:00 2001 From: Mark Nelson Date: Thu, 24 Jul 2008 14:28:48 +1000 Subject: powerpc/cell: Fixed IOMMU mapping uses weak ordering for a pcie endpoint At the moment the fixed mapping is by default strongly ordered (the iommu_fixed=weak boot option must be used to make the fixed mapping weakly ordered). If we're on a setup where the southbridge is being used in endpoint mode (triblade and CAB boards) the default should be a weakly ordered fixed mapping. This adds a check so that if a node of type pcie-endpoint can be found in the device tree the fixed mapping is set to be weak by default (but can be overridden using iommu_fixed=strong). Signed-off-by: Mark Nelson Acked-by: Arnd Bergmann Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/cell/iommu.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index 208005ca262..031124a8e37 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -1150,12 +1150,23 @@ static int iommu_fixed_disabled; static int __init setup_iommu_fixed(char *str) { + struct device_node *pciep; + if (strcmp(str, "off") == 0) iommu_fixed_disabled = 1; - else if (strcmp(str, "weak") == 0) + /* If we can find a pcie-endpoint in the device tree assume that + * we're on a triblade or a CAB so by default the fixed mapping + * should be set to be weakly ordered; but only if the boot + * option WASN'T set for strong ordering + */ + pciep = of_find_node_by_type(NULL, "pcie-endpoint"); + + if (strcmp(str, "weak") == 0 || (pciep && strcmp(str, "strong") != 0)) iommu_fixed_is_weak = 1; + of_node_put(pciep); + return 1; } __setup("iommu_fixed=", setup_iommu_fixed); -- cgit v1.2.3 From 80c60bf9b96f6108c630d90efc073cd520801e6c Mon Sep 17 00:00:00 2001 From: Segher Boessenkool Date: Fri, 25 Jul 2008 10:08:41 +1000 Subject: powerpc: Fix compile error with binutils 2.15 My previous patch to fix compilation with binutils-2.17 causes a "file truncated" build error from ld with binutils 2.15 (and possibly older), and a warning with 2.16 and 2.17. This fixes it. Signed-off-by: Segher Boessenkool Acked-by: Chuck Meade Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/vmlinux.lds.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index a914411bced..4a8ce62fe11 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -85,7 +85,7 @@ SECTIONS /* The dummy segment contents for the bug workaround mentioned above near PHDRS. */ - .dummy : { + .dummy : AT(ADDR(.dummy) - LOAD_OFFSET) { LONG(0xf177) } :kernel :dummy -- cgit v1.2.3 From 545500b307658ad5783e0f3a52a32b97b2dfaed2 Mon Sep 17 00:00:00 2001 From: Nathan Fontenot Date: Thu, 24 Jul 2008 04:25:00 +1000 Subject: powerpc/pseries: Remove extraneous error reporting for hcall failures in lparcfg Remove the extraneous error reporting used when a hcall made from lparcfg fails. Signed-off-by: Nathan Fontenot Signed-off-by: Robert Jennings Acked-by: Paul Mackerras Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/lparcfg.c | 32 -------------------------------- 1 file changed, 32 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index 827a5726a03..20278ece31d 100644 --- a/arch/powerpc/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -129,33 +129,6 @@ static int iseries_lparcfg_data(struct seq_file *m, void *v) /* * Methods used to fetch LPAR data when running on a pSeries platform. */ -static void log_plpar_hcall_return(unsigned long rc, char *tag) -{ - switch(rc) { - case 0: - return; - case H_HARDWARE: - printk(KERN_INFO "plpar-hcall (%s) " - "Hardware fault\n", tag); - return; - case H_FUNCTION: - printk(KERN_INFO "plpar-hcall (%s) " - "Function not allowed\n", tag); - return; - case H_AUTHORITY: - printk(KERN_INFO "plpar-hcall (%s) " - "Not authorized to this function\n", tag); - return; - case H_PARAMETER: - printk(KERN_INFO "plpar-hcall (%s) " - "Bad parameter(s)\n",tag); - return; - default: - printk(KERN_INFO "plpar-hcall (%s) " - "Unexpected rc(0x%lx)\n", tag, rc); - } -} - /* * H_GET_PPP hcall returns info in 4 parms. * entitled_capacity,unallocated_capacity, @@ -191,8 +164,6 @@ static unsigned int h_get_ppp(unsigned long *entitled, *aggregation = retbuf[2]; *resource = retbuf[3]; - log_plpar_hcall_return(rc, "H_GET_PPP"); - return rc; } @@ -205,9 +176,6 @@ static void h_pic(unsigned long *pool_idle_time, unsigned long *num_procs) *pool_idle_time = retbuf[0]; *num_procs = retbuf[1]; - - if (rc != H_AUTHORITY) - log_plpar_hcall_return(rc, "H_PIC"); } #define SPLPAR_CHARACTERISTICS_TOKEN 20 -- cgit v1.2.3 From 11529396ea3190113173f7a15e59a58dbcaa36c8 Mon Sep 17 00:00:00 2001 From: Nathan Fotenot Date: Thu, 24 Jul 2008 04:25:16 +1000 Subject: powerpc/pseries: Split processor entitlement retrieval and gathering to helper routines Split the retrieval and setting of processor entitlement and weight into helper routines. This also removes the printing of the raw values returned from h_get_ppp, the values are already parsed and printed. Signed-off-by: Nathan Fontenot Signed-off-by: Robert Jennings Acked-by: Paul Mackerras Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/lparcfg.c | 166 ++++++++++++++++++++++-------------------- 1 file changed, 88 insertions(+), 78 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index 20278ece31d..a0ca90ab5e3 100644 --- a/arch/powerpc/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -167,7 +167,8 @@ static unsigned int h_get_ppp(unsigned long *entitled, return rc; } -static void h_pic(unsigned long *pool_idle_time, unsigned long *num_procs) +static unsigned h_pic(unsigned long *pool_idle_time, + unsigned long *num_procs) { unsigned long rc; unsigned long retbuf[PLPAR_HCALL_BUFSIZE]; @@ -176,6 +177,51 @@ static void h_pic(unsigned long *pool_idle_time, unsigned long *num_procs) *pool_idle_time = retbuf[0]; *num_procs = retbuf[1]; + + return rc; +} + +/* + * parse_ppp_data + * Parse out the data returned from h_get_ppp and h_pic + */ +static void parse_ppp_data(struct seq_file *m) +{ + unsigned long h_entitled, h_unallocated; + unsigned long h_aggregation, h_resource; + int rc; + + rc = h_get_ppp(&h_entitled, &h_unallocated, &h_aggregation, + &h_resource); + if (rc) + return; + + seq_printf(m, "partition_entitled_capacity=%ld\n", h_entitled); + seq_printf(m, "group=%ld\n", (h_aggregation >> 2 * 8) & 0xffff); + seq_printf(m, "system_active_processors=%ld\n", + (h_resource >> 0 * 8) & 0xffff); + + /* pool related entries are apropriate for shared configs */ + if (lppaca[0].shared_proc) { + unsigned long pool_idle_time, pool_procs; + + seq_printf(m, "pool=%ld\n", (h_aggregation >> 0 * 8) & 0xffff); + + /* report pool_capacity in percentage */ + seq_printf(m, "pool_capacity=%ld\n", + ((h_resource >> 2 * 8) & 0xffff) * 100); + + h_pic(&pool_idle_time, &pool_procs); + seq_printf(m, "pool_idle_time=%ld\n", pool_idle_time); + seq_printf(m, "pool_num_procs=%ld\n", pool_procs); + } + + seq_printf(m, "unallocated_capacity_weight=%ld\n", + (h_resource >> 4 * 8) & 0xFF); + + seq_printf(m, "capacity_weight=%ld\n", (h_resource >> 5 * 8) & 0xFF); + seq_printf(m, "capped=%ld\n", (h_resource >> 6 * 8) & 0x01); + seq_printf(m, "unallocated_capacity=%ld\n", h_unallocated); } #define SPLPAR_CHARACTERISTICS_TOKEN 20 @@ -302,60 +348,11 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v) partition_active_processors = lparcfg_count_active_processors(); if (firmware_has_feature(FW_FEATURE_SPLPAR)) { - unsigned long h_entitled, h_unallocated; - unsigned long h_aggregation, h_resource; - unsigned long pool_idle_time, pool_procs; - unsigned long purr; - - h_get_ppp(&h_entitled, &h_unallocated, &h_aggregation, - &h_resource); - - seq_printf(m, "R4=0x%lx\n", h_entitled); - seq_printf(m, "R5=0x%lx\n", h_unallocated); - seq_printf(m, "R6=0x%lx\n", h_aggregation); - seq_printf(m, "R7=0x%lx\n", h_resource); - - purr = get_purr(); - /* this call handles the ibm,get-system-parameter contents */ parse_system_parameter_string(m); + parse_ppp_data(m); - seq_printf(m, "partition_entitled_capacity=%ld\n", h_entitled); - - seq_printf(m, "group=%ld\n", (h_aggregation >> 2 * 8) & 0xffff); - - seq_printf(m, "system_active_processors=%ld\n", - (h_resource >> 0 * 8) & 0xffff); - - /* pool related entries are apropriate for shared configs */ - if (lppaca[0].shared_proc) { - - h_pic(&pool_idle_time, &pool_procs); - - seq_printf(m, "pool=%ld\n", - (h_aggregation >> 0 * 8) & 0xffff); - - /* report pool_capacity in percentage */ - seq_printf(m, "pool_capacity=%ld\n", - ((h_resource >> 2 * 8) & 0xffff) * 100); - - seq_printf(m, "pool_idle_time=%ld\n", pool_idle_time); - - seq_printf(m, "pool_num_procs=%ld\n", pool_procs); - } - - seq_printf(m, "unallocated_capacity_weight=%ld\n", - (h_resource >> 4 * 8) & 0xFF); - - seq_printf(m, "capacity_weight=%ld\n", - (h_resource >> 5 * 8) & 0xFF); - - seq_printf(m, "capped=%ld\n", (h_resource >> 6 * 8) & 0x01); - - seq_printf(m, "unallocated_capacity=%ld\n", h_unallocated); - - seq_printf(m, "purr=%ld\n", purr); - + seq_printf(m, "purr=%ld\n", get_purr()); } else { /* non SPLPAR case */ seq_printf(m, "system_active_processors=%d\n", @@ -382,6 +379,41 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v) return 0; } +static ssize_t update_ppp(u64 *entitlement, u8 *weight) +{ + unsigned long current_entitled; + unsigned long dummy; + unsigned long resource; + u8 current_weight, new_weight; + u64 new_entitled; + ssize_t retval; + + /* Get our current parameters */ + retval = h_get_ppp(¤t_entitled, &dummy, &dummy, &resource); + if (retval) + return retval; + + current_weight = (resource >> 5 * 8) & 0xFF; + + if (entitlement) { + new_weight = current_weight; + new_entitled = *entitlement; + } else if (weight) { + new_weight = *weight; + new_entitled = current_entitled; + } else + return -EINVAL; + + pr_debug("%s: current_entitled = %lu, current_weight = %u\n", + __FUNCTION__, current_entitled, current_weight); + + pr_debug("%s: new_entitled = %lu, new_weight = %u\n", + __FUNCTION__, new_entitled, new_weight); + + retval = plpar_hcall_norets(H_SET_PPP, new_entitled, new_weight); + return retval; +} + /* * Interface for changing system parameters (variable capacity weight * and entitled capacity). Format of input is "param_name=value"; @@ -399,12 +431,6 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf, char *tmp; u64 new_entitled, *new_entitled_ptr = &new_entitled; u8 new_weight, *new_weight_ptr = &new_weight; - - unsigned long current_entitled; /* parameters for h_get_ppp */ - unsigned long dummy; - unsigned long resource; - u8 current_weight; - ssize_t retval = -ENOMEM; if (!firmware_has_feature(FW_FEATURE_SPLPAR) || @@ -432,33 +458,17 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf, *new_entitled_ptr = (u64) simple_strtoul(tmp, &endp, 10); if (endp == tmp) goto out; - new_weight_ptr = ¤t_weight; + + retval = update_ppp(new_entitled_ptr, NULL); } else if (!strcmp(kbuf, "capacity_weight")) { char *endp; *new_weight_ptr = (u8) simple_strtoul(tmp, &endp, 10); if (endp == tmp) goto out; - new_entitled_ptr = ¤t_entitled; - } else - goto out; - /* Get our current parameters */ - retval = h_get_ppp(¤t_entitled, &dummy, &dummy, &resource); - if (retval) { - retval = -EIO; + retval = update_ppp(NULL, new_weight_ptr); + } else goto out; - } - - current_weight = (resource >> 5 * 8) & 0xFF; - - pr_debug("%s: current_entitled = %lu, current_weight = %u\n", - __func__, current_entitled, current_weight); - - pr_debug("%s: new_entitled = %lu, new_weight = %u\n", - __func__, *new_entitled_ptr, *new_weight_ptr); - - retval = plpar_hcall_norets(H_SET_PPP, *new_entitled_ptr, - *new_weight_ptr); if (retval == H_SUCCESS || retval == H_CONSTRAINED) { retval = count; -- cgit v1.2.3 From dfc3403f0e5ffb94ee29942f313b87d4061d951b Mon Sep 17 00:00:00 2001 From: Nathan Fontenot Date: Thu, 24 Jul 2008 04:27:30 +1000 Subject: powerpc/pseries: Add memory entitlement capabilities to /proc/ppc64/lparcfg Update /proc/ppc64/lparcfg to display Cooperative Memory Overcommitment statistics as reported by the H_GET_MPP hcall. This also updates the lparcfg interface to allow setting memory entitlement and weight. Signed-off-by: Nathan Fontenot Signed-off-by: Robert Jennings Acked-by: Paul Mackerras Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/lparcfg.c | 121 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 120 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index a0ca90ab5e3..86e5b3ed10d 100644 --- a/arch/powerpc/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -35,7 +35,7 @@ #include #include -#define MODULE_VERS "1.7" +#define MODULE_VERS "1.8" #define MODULE_NAME "lparcfg" /* #define LPARCFG_DEBUG */ @@ -129,6 +129,35 @@ static int iseries_lparcfg_data(struct seq_file *m, void *v) /* * Methods used to fetch LPAR data when running on a pSeries platform. */ +/** + * h_get_mpp + * H_GET_MPP hcall returns info in 7 parms + */ +int h_get_mpp(struct hvcall_mpp_data *mpp_data) +{ + int rc; + unsigned long retbuf[PLPAR_HCALL9_BUFSIZE]; + + rc = plpar_hcall9(H_GET_MPP, retbuf); + + mpp_data->entitled_mem = retbuf[0]; + mpp_data->mapped_mem = retbuf[1]; + + mpp_data->group_num = (retbuf[2] >> 2 * 8) & 0xffff; + mpp_data->pool_num = retbuf[2] & 0xffff; + + mpp_data->mem_weight = (retbuf[3] >> 7 * 8) & 0xff; + mpp_data->unallocated_mem_weight = (retbuf[3] >> 6 * 8) & 0xff; + mpp_data->unallocated_entitlement = retbuf[3] & 0xffffffffffff; + + mpp_data->pool_size = retbuf[4]; + mpp_data->loan_request = retbuf[5]; + mpp_data->backing_mem = retbuf[6]; + + return rc; +} +EXPORT_SYMBOL(h_get_mpp); + /* * H_GET_PPP hcall returns info in 4 parms. * entitled_capacity,unallocated_capacity, @@ -224,6 +253,44 @@ static void parse_ppp_data(struct seq_file *m) seq_printf(m, "unallocated_capacity=%ld\n", h_unallocated); } +/** + * parse_mpp_data + * Parse out data returned from h_get_mpp + */ +static void parse_mpp_data(struct seq_file *m) +{ + struct hvcall_mpp_data mpp_data; + int rc; + + rc = h_get_mpp(&mpp_data); + if (rc) + return; + + seq_printf(m, "entitled_memory=%ld\n", mpp_data.entitled_mem); + + if (mpp_data.mapped_mem != -1) + seq_printf(m, "mapped_entitled_memory=%ld\n", + mpp_data.mapped_mem); + + seq_printf(m, "entitled_memory_group_number=%d\n", mpp_data.group_num); + seq_printf(m, "entitled_memory_pool_number=%d\n", mpp_data.pool_num); + + seq_printf(m, "entitled_memory_weight=%d\n", mpp_data.mem_weight); + seq_printf(m, "unallocated_entitled_memory_weight=%d\n", + mpp_data.unallocated_mem_weight); + seq_printf(m, "unallocated_io_mapping_entitlement=%ld\n", + mpp_data.unallocated_entitlement); + + if (mpp_data.pool_size != -1) + seq_printf(m, "entitled_memory_pool_size=%ld bytes\n", + mpp_data.pool_size); + + seq_printf(m, "entitled_memory_loan_request=%ld\n", + mpp_data.loan_request); + + seq_printf(m, "backing_memory=%ld bytes\n", mpp_data.backing_mem); +} + #define SPLPAR_CHARACTERISTICS_TOKEN 20 #define SPLPAR_MAXLENGTH 1026*(sizeof(char)) @@ -351,6 +418,7 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v) /* this call handles the ibm,get-system-parameter contents */ parse_system_parameter_string(m); parse_ppp_data(m); + parse_mpp_data(m); seq_printf(m, "purr=%ld\n", get_purr()); } else { /* non SPLPAR case */ @@ -414,6 +482,43 @@ static ssize_t update_ppp(u64 *entitlement, u8 *weight) return retval; } +/** + * update_mpp + * + * Update the memory entitlement and weight for the partition. Caller must + * specify either a new entitlement or weight, not both, to be updated + * since the h_set_mpp call takes both entitlement and weight as parameters. + */ +static ssize_t update_mpp(u64 *entitlement, u8 *weight) +{ + struct hvcall_mpp_data mpp_data; + u64 new_entitled; + u8 new_weight; + ssize_t rc; + + rc = h_get_mpp(&mpp_data); + if (rc) + return rc; + + if (entitlement) { + new_weight = mpp_data.mem_weight; + new_entitled = *entitlement; + } else if (weight) { + new_weight = *weight; + new_entitled = mpp_data.entitled_mem; + } else + return -EINVAL; + + pr_debug("%s: current_entitled = %lu, current_weight = %u\n", + __FUNCTION__, mpp_data.entitled_mem, mpp_data.mem_weight); + + pr_debug("%s: new_entitled = %lu, new_weight = %u\n", + __FUNCTION__, new_entitled, new_weight); + + rc = plpar_hcall_norets(H_SET_MPP, new_entitled, new_weight); + return rc; +} + /* * Interface for changing system parameters (variable capacity weight * and entitled capacity). Format of input is "param_name=value"; @@ -467,6 +572,20 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf, goto out; retval = update_ppp(NULL, new_weight_ptr); + } else if (!strcmp(kbuf, "entitled_memory")) { + char *endp; + *new_entitled_ptr = (u64) simple_strtoul(tmp, &endp, 10); + if (endp == tmp) + goto out; + + retval = update_mpp(new_entitled_ptr, NULL); + } else if (!strcmp(kbuf, "entitled_memory_weight")) { + char *endp; + *new_weight_ptr = (u8) simple_strtoul(tmp, &endp, 10); + if (endp == tmp) + goto out; + + retval = update_mpp(NULL, new_weight_ptr); } else goto out; -- cgit v1.2.3 From 398778f78b76fb72cb18411487af01dea202709e Mon Sep 17 00:00:00 2001 From: Robert Jennings Date: Thu, 24 Jul 2008 04:28:05 +1000 Subject: powerpc/pseries: Split retrieval of processor entitlement data into a helper routine Split the retrieval of processor entitlement data returned in the H_GET_PPP hcall into its own helper routine. Signed-off-by: Nathan Fontenot Signed-off-by: Robert Jennings Acked-by: Paul Mackerras Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/lparcfg.c | 81 ++++++++++++++++++++++++------------------- 1 file changed, 46 insertions(+), 35 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index 86e5b3ed10d..d82e1fa5ce2 100644 --- a/arch/powerpc/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -158,6 +158,18 @@ int h_get_mpp(struct hvcall_mpp_data *mpp_data) } EXPORT_SYMBOL(h_get_mpp); +struct hvcall_ppp_data { + u64 entitlement; + u64 unallocated_entitlement; + u16 group_num; + u16 pool_num; + u8 capped; + u8 weight; + u8 unallocated_weight; + u16 active_procs_in_pool; + u16 active_system_procs; +}; + /* * H_GET_PPP hcall returns info in 4 parms. * entitled_capacity,unallocated_capacity, @@ -178,20 +190,24 @@ EXPORT_SYMBOL(h_get_mpp); * XXXX - Active processors in Physical Processor Pool. * XXXX - Processors active on platform. */ -static unsigned int h_get_ppp(unsigned long *entitled, - unsigned long *unallocated, - unsigned long *aggregation, - unsigned long *resource) +static unsigned int h_get_ppp(struct hvcall_ppp_data *ppp_data) { unsigned long rc; unsigned long retbuf[PLPAR_HCALL_BUFSIZE]; rc = plpar_hcall(H_GET_PPP, retbuf); - *entitled = retbuf[0]; - *unallocated = retbuf[1]; - *aggregation = retbuf[2]; - *resource = retbuf[3]; + ppp_data->entitlement = retbuf[0]; + ppp_data->unallocated_entitlement = retbuf[1]; + + ppp_data->group_num = (retbuf[2] >> 2 * 8) & 0xffff; + ppp_data->pool_num = retbuf[2] & 0xffff; + + ppp_data->capped = (retbuf[3] >> 6 * 8) & 0x01; + ppp_data->weight = (retbuf[3] >> 5 * 8) & 0xff; + ppp_data->unallocated_weight = (retbuf[3] >> 4 * 8) & 0xff; + ppp_data->active_procs_in_pool = (retbuf[3] >> 2 * 8) & 0xffff; + ppp_data->active_system_procs = retbuf[3] & 0xffff; return rc; } @@ -216,41 +232,40 @@ static unsigned h_pic(unsigned long *pool_idle_time, */ static void parse_ppp_data(struct seq_file *m) { - unsigned long h_entitled, h_unallocated; - unsigned long h_aggregation, h_resource; + struct hvcall_ppp_data ppp_data; int rc; - rc = h_get_ppp(&h_entitled, &h_unallocated, &h_aggregation, - &h_resource); + rc = h_get_ppp(&ppp_data); if (rc) return; - seq_printf(m, "partition_entitled_capacity=%ld\n", h_entitled); - seq_printf(m, "group=%ld\n", (h_aggregation >> 2 * 8) & 0xffff); - seq_printf(m, "system_active_processors=%ld\n", - (h_resource >> 0 * 8) & 0xffff); + seq_printf(m, "partition_entitled_capacity=%ld\n", + ppp_data.entitlement); + seq_printf(m, "group=%d\n", ppp_data.group_num); + seq_printf(m, "system_active_processors=%d\n", + ppp_data.active_system_procs); /* pool related entries are apropriate for shared configs */ if (lppaca[0].shared_proc) { unsigned long pool_idle_time, pool_procs; - seq_printf(m, "pool=%ld\n", (h_aggregation >> 0 * 8) & 0xffff); + seq_printf(m, "pool=%d\n", ppp_data.pool_num); /* report pool_capacity in percentage */ - seq_printf(m, "pool_capacity=%ld\n", - ((h_resource >> 2 * 8) & 0xffff) * 100); + seq_printf(m, "pool_capacity=%d\n", + ppp_data.active_procs_in_pool * 100); h_pic(&pool_idle_time, &pool_procs); seq_printf(m, "pool_idle_time=%ld\n", pool_idle_time); seq_printf(m, "pool_num_procs=%ld\n", pool_procs); } - seq_printf(m, "unallocated_capacity_weight=%ld\n", - (h_resource >> 4 * 8) & 0xFF); - - seq_printf(m, "capacity_weight=%ld\n", (h_resource >> 5 * 8) & 0xFF); - seq_printf(m, "capped=%ld\n", (h_resource >> 6 * 8) & 0x01); - seq_printf(m, "unallocated_capacity=%ld\n", h_unallocated); + seq_printf(m, "unallocated_capacity_weight=%d\n", + ppp_data.unallocated_weight); + seq_printf(m, "capacity_weight=%d\n", ppp_data.weight); + seq_printf(m, "capped=%d\n", ppp_data.capped); + seq_printf(m, "unallocated_capacity=%ld\n", + ppp_data.unallocated_entitlement); } /** @@ -449,31 +464,27 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v) static ssize_t update_ppp(u64 *entitlement, u8 *weight) { - unsigned long current_entitled; - unsigned long dummy; - unsigned long resource; - u8 current_weight, new_weight; + struct hvcall_ppp_data ppp_data; + u8 new_weight; u64 new_entitled; ssize_t retval; /* Get our current parameters */ - retval = h_get_ppp(¤t_entitled, &dummy, &dummy, &resource); + retval = h_get_ppp(&ppp_data); if (retval) return retval; - current_weight = (resource >> 5 * 8) & 0xFF; - if (entitlement) { - new_weight = current_weight; + new_weight = ppp_data.weight; new_entitled = *entitlement; } else if (weight) { new_weight = *weight; - new_entitled = current_entitled; + new_entitled = ppp_data.entitlement; } else return -EINVAL; pr_debug("%s: current_entitled = %lu, current_weight = %u\n", - __FUNCTION__, current_entitled, current_weight); + __FUNCTION__, ppp_data.entitlement, ppp_data.weight); pr_debug("%s: new_entitled = %lu, new_weight = %u\n", __FUNCTION__, new_entitled, new_weight); -- cgit v1.2.3 From e46de429cb954d30a5642fba81d516ede518c65e Mon Sep 17 00:00:00 2001 From: Robert Jennings Date: Thu, 24 Jul 2008 04:29:03 +1000 Subject: powerpc/pseries: Enable CMO feature during platform setup For Cooperative Memory Overcommitment (CMO), set the FW_FEATURE_CMO flag in powerpc_firmware_features from the rtas ibm,get-system-parameters table prior to calling iommu_init_early_pSeries. With this, any CMO specific functionality can be controlled by checking: firmware_has_feature(FW_FEATURE_CMO) Signed-off-by: Robert Jennings Acked-by: Paul Mackerras Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/setup.c | 71 ++++++++++++++++++++++++++++++++++ 1 file changed, 71 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 90beb444e1d..063a0d2fba3 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -314,6 +314,76 @@ static int pseries_set_xdabr(unsigned long dabr) H_DABRX_KERNEL | H_DABRX_USER); } +#define CMO_CHARACTERISTICS_TOKEN 44 +#define CMO_MAXLENGTH 1026 + +/** + * fw_cmo_feature_init - FW_FEATURE_CMO is not stored in ibm,hypertas-functions, + * handle that here. (Stolen from parse_system_parameter_string) + */ +void pSeries_cmo_feature_init(void) +{ + char *ptr, *key, *value, *end; + int call_status; + int PrPSP = -1; + int SecPSP = -1; + + pr_debug(" -> fw_cmo_feature_init()\n"); + spin_lock(&rtas_data_buf_lock); + memset(rtas_data_buf, 0, RTAS_DATA_BUF_SIZE); + call_status = rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1, + NULL, + CMO_CHARACTERISTICS_TOKEN, + __pa(rtas_data_buf), + RTAS_DATA_BUF_SIZE); + + if (call_status != 0) { + spin_unlock(&rtas_data_buf_lock); + pr_debug("CMO not available\n"); + pr_debug(" <- fw_cmo_feature_init()\n"); + return; + } + + end = rtas_data_buf + CMO_MAXLENGTH - 2; + ptr = rtas_data_buf + 2; /* step over strlen value */ + key = value = ptr; + + while (*ptr && (ptr <= end)) { + /* Separate the key and value by replacing '=' with '\0' and + * point the value at the string after the '=' + */ + if (ptr[0] == '=') { + ptr[0] = '\0'; + value = ptr + 1; + } else if (ptr[0] == '\0' || ptr[0] == ',') { + /* Terminate the string containing the key/value pair */ + ptr[0] = '\0'; + + if (key == value) { + pr_debug("Malformed key/value pair\n"); + /* Never found a '=', end processing */ + break; + } + + if (0 == strcmp(key, "PrPSP")) + PrPSP = simple_strtol(value, NULL, 10); + else if (0 == strcmp(key, "SecPSP")) + SecPSP = simple_strtol(value, NULL, 10); + value = key = ptr + 1; + } + ptr++; + } + + if (PrPSP != -1 || SecPSP != -1) { + pr_info("CMO enabled\n"); + pr_debug("CMO enabled, PrPSP=%d, SecPSP=%d\n", PrPSP, SecPSP); + powerpc_firmware_features |= FW_FEATURE_CMO; + } else + pr_debug("CMO not enabled, PrPSP=%d, SecPSP=%d\n", PrPSP, SecPSP); + spin_unlock(&rtas_data_buf_lock); + pr_debug(" <- fw_cmo_feature_init()\n"); +} + /* * Early initialization. Relocation is on but do not reference unbolted pages */ @@ -329,6 +399,7 @@ static void __init pSeries_init_early(void) else if (firmware_has_feature(FW_FEATURE_XDABR)) ppc_md.set_dabr = pseries_set_xdabr; + pSeries_cmo_feature_init(); iommu_init_early_pSeries(); pr_debug(" <- pSeries_init_early()\n"); -- cgit v1.2.3 From 86630a32320f83736c4c24e2c8bae218e4c56c7c Mon Sep 17 00:00:00 2001 From: Brian King Date: Thu, 24 Jul 2008 04:29:16 +1000 Subject: powerpc/pseries: Utilities to set firmware page state Newer versions of firmware support page states, which are used by the collaborative memory manager (future patch) to "loan" pages to the hypervisor for use by other partitions. Signed-off-by: Brian King Signed-off-by: Robert Jennings Acked-by: Paul Mackerras Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/plpar_wrappers.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/pseries/plpar_wrappers.h b/arch/powerpc/platforms/pseries/plpar_wrappers.h index d8680b589dc..a437267c6bf 100644 --- a/arch/powerpc/platforms/pseries/plpar_wrappers.h +++ b/arch/powerpc/platforms/pseries/plpar_wrappers.h @@ -42,6 +42,16 @@ static inline long register_slb_shadow(unsigned long cpu, unsigned long vpa) return vpa_call(0x3, cpu, vpa); } +static inline long plpar_page_set_loaned(unsigned long vpa) +{ + return plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_LOANED, vpa, 0); +} + +static inline long plpar_page_set_active(unsigned long vpa) +{ + return plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_ACTIVE, vpa, 0); +} + extern void vpa_init(int cpu); static inline long plpar_pte_enter(unsigned long flags, -- cgit v1.2.3 From 84af458bb23bf5f0ba1af4320dd2a57f7c4363e5 Mon Sep 17 00:00:00 2001 From: Brian King Date: Thu, 24 Jul 2008 04:30:29 +1000 Subject: powerpc/pseries: Add collaborative memory manager Adds a collaborative memory manager, which acts as a simple balloon driver for System p machines that support cooperative memory overcommitment (CMO). Adds a platform configuration option for CMO called PPC_SMLPAR. Signed-off-by: Brian King Signed-off-by: Robert Jennings Acked-by: Paul Mackerras Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/Kconfig | 23 ++ arch/powerpc/platforms/pseries/Makefile | 1 + arch/powerpc/platforms/pseries/cmm.c | 468 ++++++++++++++++++++++++++++++++ 3 files changed, 492 insertions(+) create mode 100644 arch/powerpc/platforms/pseries/cmm.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index 757c0296e0b..97619fd51e3 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -40,3 +40,26 @@ config PPC_PSERIES_DEBUG depends on PPC_PSERIES && PPC_EARLY_DEBUG bool "Enable extra debug logging in platforms/pseries" default y + +config PPC_SMLPAR + bool "Support for shared-memory logical partitions" + depends on PPC_PSERIES + select LPARCFG + default n + help + Select this option to enable shared memory partition support. + With this option a system running in an LPAR can be given more + memory than physically available and will allow firmware to + balance memory across many LPARs. + +config CMM + tristate "Collaborative memory management" + depends on PPC_SMLPAR + default y + help + Select this option, if you want to enable the kernel interface + to reduce the memory size of the system. This is accomplished + by allocating pages of memory and put them "on hold". This only + makes sense for a system running in an LPAR where the unused pages + will be reused for other LPARs. The interface allows firmware to + balance memory across many LPARs. diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index 554c6e42ef2..dfe574af2dc 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -24,3 +24,4 @@ obj-$(CONFIG_HVC_CONSOLE) += hvconsole.o obj-$(CONFIG_HVCS) += hvcserver.o obj-$(CONFIG_HCALL_STATS) += hvCall_inst.o obj-$(CONFIG_PHYP_DUMP) += phyp_dump.o +obj-$(CONFIG_CMM) += cmm.o diff --git a/arch/powerpc/platforms/pseries/cmm.c b/arch/powerpc/platforms/pseries/cmm.c new file mode 100644 index 00000000000..c6b3be03168 --- /dev/null +++ b/arch/powerpc/platforms/pseries/cmm.c @@ -0,0 +1,468 @@ +/* + * Collaborative memory management interface. + * + * Copyright (C) 2008 IBM Corporation + * Author(s): Brian King (brking@linux.vnet.ibm.com), + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "plpar_wrappers.h" + +#define CMM_DRIVER_VERSION "1.0.0" +#define CMM_DEFAULT_DELAY 1 +#define CMM_DEBUG 0 +#define CMM_DISABLE 0 +#define CMM_OOM_KB 1024 +#define CMM_MIN_MEM_MB 256 +#define KB2PAGES(_p) ((_p)>>(PAGE_SHIFT-10)) +#define PAGES2KB(_p) ((_p)<<(PAGE_SHIFT-10)) + +static unsigned int delay = CMM_DEFAULT_DELAY; +static unsigned int oom_kb = CMM_OOM_KB; +static unsigned int cmm_debug = CMM_DEBUG; +static unsigned int cmm_disabled = CMM_DISABLE; +static unsigned long min_mem_mb = CMM_MIN_MEM_MB; +static struct sys_device cmm_sysdev; + +MODULE_AUTHOR("Brian King "); +MODULE_DESCRIPTION("IBM System p Collaborative Memory Manager"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(CMM_DRIVER_VERSION); + +module_param_named(delay, delay, uint, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(delay, "Delay (in seconds) between polls to query hypervisor paging requests. " + "[Default=" __stringify(CMM_DEFAULT_DELAY) "]"); +module_param_named(oom_kb, oom_kb, uint, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(oom_kb, "Amount of memory in kb to free on OOM. " + "[Default=" __stringify(CMM_OOM_KB) "]"); +module_param_named(min_mem_mb, min_mem_mb, ulong, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(min_mem_mb, "Minimum amount of memory (in MB) to not balloon. " + "[Default=" __stringify(CMM_MIN_MEM_MB) "]"); +module_param_named(debug, cmm_debug, uint, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Enable module debugging logging. Set to 1 to enable. " + "[Default=" __stringify(CMM_DEBUG) "]"); + +#define CMM_NR_PAGES ((PAGE_SIZE - sizeof(void *) - sizeof(unsigned long)) / sizeof(unsigned long)) + +#define cmm_dbg(...) if (cmm_debug) { printk(KERN_INFO "cmm: "__VA_ARGS__); } + +struct cmm_page_array { + struct cmm_page_array *next; + unsigned long index; + unsigned long page[CMM_NR_PAGES]; +}; + +static unsigned long loaned_pages; +static unsigned long loaned_pages_target; +static unsigned long oom_freed_pages; + +static struct cmm_page_array *cmm_page_list; +static DEFINE_SPINLOCK(cmm_lock); + +static struct task_struct *cmm_thread_ptr; + +/** + * cmm_alloc_pages - Allocate pages and mark them as loaned + * @nr: number of pages to allocate + * + * Return value: + * number of pages requested to be allocated which were not + **/ +static long cmm_alloc_pages(long nr) +{ + struct cmm_page_array *pa, *npa; + unsigned long addr; + long rc; + + cmm_dbg("Begin request for %ld pages\n", nr); + + while (nr) { + addr = __get_free_page(GFP_NOIO | __GFP_NOWARN | + __GFP_NORETRY | __GFP_NOMEMALLOC); + if (!addr) + break; + spin_lock(&cmm_lock); + pa = cmm_page_list; + if (!pa || pa->index >= CMM_NR_PAGES) { + /* Need a new page for the page list. */ + spin_unlock(&cmm_lock); + npa = (struct cmm_page_array *)__get_free_page(GFP_NOIO | __GFP_NOWARN | + __GFP_NORETRY | __GFP_NOMEMALLOC); + if (!npa) { + pr_info("%s: Can not allocate new page list\n", __FUNCTION__); + free_page(addr); + break; + } + spin_lock(&cmm_lock); + pa = cmm_page_list; + + if (!pa || pa->index >= CMM_NR_PAGES) { + npa->next = pa; + npa->index = 0; + pa = npa; + cmm_page_list = pa; + } else + free_page((unsigned long) npa); + } + + if ((rc = plpar_page_set_loaned(__pa(addr)))) { + pr_err("%s: Can not set page to loaned. rc=%ld\n", __FUNCTION__, rc); + spin_unlock(&cmm_lock); + free_page(addr); + break; + } + + pa->page[pa->index++] = addr; + loaned_pages++; + totalram_pages--; + spin_unlock(&cmm_lock); + nr--; + } + + cmm_dbg("End request with %ld pages unfulfilled\n", nr); + return nr; +} + +/** + * cmm_free_pages - Free pages and mark them as active + * @nr: number of pages to free + * + * Return value: + * number of pages requested to be freed which were not + **/ +static long cmm_free_pages(long nr) +{ + struct cmm_page_array *pa; + unsigned long addr; + + cmm_dbg("Begin free of %ld pages.\n", nr); + spin_lock(&cmm_lock); + pa = cmm_page_list; + while (nr) { + if (!pa || pa->index <= 0) + break; + addr = pa->page[--pa->index]; + + if (pa->index == 0) { + pa = pa->next; + free_page((unsigned long) cmm_page_list); + cmm_page_list = pa; + } + + plpar_page_set_active(__pa(addr)); + free_page(addr); + loaned_pages--; + nr--; + totalram_pages++; + } + spin_unlock(&cmm_lock); + cmm_dbg("End request with %ld pages unfulfilled\n", nr); + return nr; +} + +/** + * cmm_oom_notify - OOM notifier + * @self: notifier block struct + * @dummy: not used + * @parm: returned - number of pages freed + * + * Return value: + * NOTIFY_OK + **/ +static int cmm_oom_notify(struct notifier_block *self, + unsigned long dummy, void *parm) +{ + unsigned long *freed = parm; + long nr = KB2PAGES(oom_kb); + + cmm_dbg("OOM processing started\n"); + nr = cmm_free_pages(nr); + loaned_pages_target = loaned_pages; + *freed += KB2PAGES(oom_kb) - nr; + oom_freed_pages += KB2PAGES(oom_kb) - nr; + cmm_dbg("OOM processing complete\n"); + return NOTIFY_OK; +} + +/** + * cmm_get_mpp - Read memory performance parameters + * + * Makes hcall to query the current page loan request from the hypervisor. + * + * Return value: + * nothing + **/ +static void cmm_get_mpp(void) +{ + int rc; + struct hvcall_mpp_data mpp_data; + unsigned long active_pages_target; + signed long page_loan_request; + + rc = h_get_mpp(&mpp_data); + + if (rc != H_SUCCESS) + return; + + page_loan_request = div_s64((s64)mpp_data.loan_request, PAGE_SIZE); + loaned_pages_target = page_loan_request + loaned_pages; + if (loaned_pages_target > oom_freed_pages) + loaned_pages_target -= oom_freed_pages; + else + loaned_pages_target = 0; + + active_pages_target = totalram_pages + loaned_pages - loaned_pages_target; + + if ((min_mem_mb * 1024 * 1024) > (active_pages_target * PAGE_SIZE)) + loaned_pages_target = totalram_pages + loaned_pages - + ((min_mem_mb * 1024 * 1024) / PAGE_SIZE); + + cmm_dbg("delta = %ld, loaned = %lu, target = %lu, oom = %lu, totalram = %lu\n", + page_loan_request, loaned_pages, loaned_pages_target, + oom_freed_pages, totalram_pages); +} + +static struct notifier_block cmm_oom_nb = { + .notifier_call = cmm_oom_notify +}; + +/** + * cmm_thread - CMM task thread + * @dummy: not used + * + * Return value: + * 0 + **/ +static int cmm_thread(void *dummy) +{ + unsigned long timeleft; + + while (1) { + timeleft = msleep_interruptible(delay * 1000); + + if (kthread_should_stop() || timeleft) { + loaned_pages_target = loaned_pages; + break; + } + + cmm_get_mpp(); + + if (loaned_pages_target > loaned_pages) { + if (cmm_alloc_pages(loaned_pages_target - loaned_pages)) + loaned_pages_target = loaned_pages; + } else if (loaned_pages_target < loaned_pages) + cmm_free_pages(loaned_pages - loaned_pages_target); + } + return 0; +} + +#define CMM_SHOW(name, format, args...) \ + static ssize_t show_##name(struct sys_device *dev, char *buf) \ + { \ + return sprintf(buf, format, ##args); \ + } \ + static SYSDEV_ATTR(name, S_IRUGO, show_##name, NULL) + +CMM_SHOW(loaned_kb, "%lu\n", PAGES2KB(loaned_pages)); +CMM_SHOW(loaned_target_kb, "%lu\n", PAGES2KB(loaned_pages_target)); + +static ssize_t show_oom_pages(struct sys_device *dev, char *buf) +{ + return sprintf(buf, "%lu\n", PAGES2KB(oom_freed_pages)); +} + +static ssize_t store_oom_pages(struct sys_device *dev, + const char *buf, size_t count) +{ + unsigned long val = simple_strtoul (buf, NULL, 10); + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + if (val != 0) + return -EBADMSG; + + oom_freed_pages = 0; + return count; +} + +static SYSDEV_ATTR(oom_freed_kb, S_IWUSR| S_IRUGO, + show_oom_pages, store_oom_pages); + +static struct sysdev_attribute *cmm_attrs[] = { + &attr_loaned_kb, + &attr_loaned_target_kb, + &attr_oom_freed_kb, +}; + +static struct sysdev_class cmm_sysdev_class = { + .name = "cmm", +}; + +/** + * cmm_sysfs_register - Register with sysfs + * + * Return value: + * 0 on success / other on failure + **/ +static int cmm_sysfs_register(struct sys_device *sysdev) +{ + int i, rc; + + if ((rc = sysdev_class_register(&cmm_sysdev_class))) + return rc; + + sysdev->id = 0; + sysdev->cls = &cmm_sysdev_class; + + if ((rc = sysdev_register(sysdev))) + goto class_unregister; + + for (i = 0; i < ARRAY_SIZE(cmm_attrs); i++) { + if ((rc = sysdev_create_file(sysdev, cmm_attrs[i]))) + goto fail; + } + + return 0; + +fail: + while (--i >= 0) + sysdev_remove_file(sysdev, cmm_attrs[i]); + sysdev_unregister(sysdev); +class_unregister: + sysdev_class_unregister(&cmm_sysdev_class); + return rc; +} + +/** + * cmm_unregister_sysfs - Unregister from sysfs + * + **/ +static void cmm_unregister_sysfs(struct sys_device *sysdev) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(cmm_attrs); i++) + sysdev_remove_file(sysdev, cmm_attrs[i]); + sysdev_unregister(sysdev); + sysdev_class_unregister(&cmm_sysdev_class); +} + +/** + * cmm_init - Module initialization + * + * Return value: + * 0 on success / other on failure + **/ +static int cmm_init(void) +{ + int rc = -ENOMEM; + + if (!firmware_has_feature(FW_FEATURE_CMO)) + return -EOPNOTSUPP; + + if ((rc = register_oom_notifier(&cmm_oom_nb)) < 0) + return rc; + + if ((rc = cmm_sysfs_register(&cmm_sysdev))) + goto out_oom_notifier; + + if (cmm_disabled) + return rc; + + cmm_thread_ptr = kthread_run(cmm_thread, NULL, "cmmthread"); + if (IS_ERR(cmm_thread_ptr)) { + rc = PTR_ERR(cmm_thread_ptr); + goto out_unregister_sysfs; + } + + return rc; + +out_unregister_sysfs: + cmm_unregister_sysfs(&cmm_sysdev); +out_oom_notifier: + unregister_oom_notifier(&cmm_oom_nb); + return rc; +} + +/** + * cmm_exit - Module exit + * + * Return value: + * nothing + **/ +static void cmm_exit(void) +{ + if (cmm_thread_ptr) + kthread_stop(cmm_thread_ptr); + unregister_oom_notifier(&cmm_oom_nb); + cmm_free_pages(loaned_pages); + cmm_unregister_sysfs(&cmm_sysdev); +} + +/** + * cmm_set_disable - Disable/Enable CMM + * + * Return value: + * 0 on success / other on failure + **/ +static int cmm_set_disable(const char *val, struct kernel_param *kp) +{ + int disable = simple_strtoul(val, NULL, 10); + + if (disable != 0 && disable != 1) + return -EINVAL; + + if (disable && !cmm_disabled) { + if (cmm_thread_ptr) + kthread_stop(cmm_thread_ptr); + cmm_thread_ptr = NULL; + cmm_free_pages(loaned_pages); + } else if (!disable && cmm_disabled) { + cmm_thread_ptr = kthread_run(cmm_thread, NULL, "cmmthread"); + if (IS_ERR(cmm_thread_ptr)) + return PTR_ERR(cmm_thread_ptr); + } + + cmm_disabled = disable; + return 0; +} + +module_param_call(disable, cmm_set_disable, param_get_uint, + &cmm_disabled, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(disable, "Disable CMM. Set to 1 to disable. " + "[Default=" __stringify(CMM_DISABLE) "]"); + +module_init(cmm_init); +module_exit(cmm_exit); -- cgit v1.2.3 From ffa5abbd0c399b32fc13a1b4718d87ee7a716999 Mon Sep 17 00:00:00 2001 From: Brian King Date: Thu, 24 Jul 2008 04:30:58 +1000 Subject: powerpc/pseries: Add CMO paging statistics With the addition of Cooperative Memory Overcommitment (CMO) support for IBM Power Systems, two fields have been added to the VPA to report paging statistics. Add support in lparcfg to report them to userspace. Signed-off-by: Brian King Signed-off-by: Robert Jennings Acked-by: Paul Mackerras Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/lparcfg.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index d82e1fa5ce2..848c3e5a637 100644 --- a/arch/powerpc/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -409,6 +409,25 @@ static int lparcfg_count_active_processors(void) return count; } +static void pseries_cmo_data(struct seq_file *m) +{ + int cpu; + unsigned long cmo_faults = 0; + unsigned long cmo_fault_time = 0; + + if (!firmware_has_feature(FW_FEATURE_CMO)) + return; + + for_each_possible_cpu(cpu) { + cmo_faults += lppaca[cpu].cmo_faults; + cmo_fault_time += lppaca[cpu].cmo_fault_time; + } + + seq_printf(m, "cmo_faults=%lu\n", cmo_faults); + seq_printf(m, "cmo_fault_time_usec=%lu\n", + cmo_fault_time / tb_ticks_per_usec); +} + static int pseries_lparcfg_data(struct seq_file *m, void *v) { int partition_potential_processors; @@ -434,6 +453,7 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v) parse_system_parameter_string(m); parse_ppp_data(m); parse_mpp_data(m); + pseries_cmo_data(m); seq_printf(m, "purr=%ld\n", get_purr()); } else { /* non SPLPAR case */ -- cgit v1.2.3 From 6490c4903d12f242bec4454301f76f6a7520e399 Mon Sep 17 00:00:00 2001 From: Robert Jennings Date: Thu, 24 Jul 2008 04:31:16 +1000 Subject: powerpc/pseries: iommu enablement for CMO To support Cooperative Memory Overcommitment (CMO), we need to check for failure from some of the tce hcalls. These changes for the pseries platform affect the powerpc architecture; patches for the other affected platforms are included in this patch. pSeries platform IOMMU code changes: * platform TCE functions must handle H_NOT_ENOUGH_RESOURCES errors and return an error. Architecture IOMMU code changes: * Calls to ppc_md.tce_build need to check return values and return DMA_MAPPING_ERROR for transient errors. Architecture changes: * struct machdep_calls for tce_build*_pSeriesLP functions need to change to indicate failure. * all other platforms will need updates to iommu functions to match the new calling semantics; they will return 0 on success. The other platforms default configs have been built, but no further testing was performed. Signed-off-by: Robert Jennings Acked-by: Olof Johansson Acked-by: Paul Mackerras Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/iommu.c | 28 +++++++++++++++++++---- arch/powerpc/platforms/cell/iommu.c | 3 ++- arch/powerpc/platforms/iseries/iommu.c | 3 ++- arch/powerpc/platforms/pasemi/iommu.c | 3 ++- arch/powerpc/platforms/pseries/iommu.c | 42 ++++++++++++++++++++++++++-------- arch/powerpc/sysdev/dart_iommu.c | 3 ++- 6 files changed, 63 insertions(+), 19 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c index 2385f68c175..550a19399bf 100644 --- a/arch/powerpc/kernel/iommu.c +++ b/arch/powerpc/kernel/iommu.c @@ -49,6 +49,8 @@ static int novmerge = 1; static int protect4gb = 1; +static void __iommu_free(struct iommu_table *, dma_addr_t, unsigned int); + static inline unsigned long iommu_num_pages(unsigned long vaddr, unsigned long slen) { @@ -191,6 +193,7 @@ static dma_addr_t iommu_alloc(struct device *dev, struct iommu_table *tbl, { unsigned long entry, flags; dma_addr_t ret = DMA_ERROR_CODE; + int build_fail; spin_lock_irqsave(&(tbl->it_lock), flags); @@ -205,9 +208,21 @@ static dma_addr_t iommu_alloc(struct device *dev, struct iommu_table *tbl, ret = entry << IOMMU_PAGE_SHIFT; /* Set the return dma address */ /* Put the TCEs in the HW table */ - ppc_md.tce_build(tbl, entry, npages, (unsigned long)page & IOMMU_PAGE_MASK, - direction, attrs); + build_fail = ppc_md.tce_build(tbl, entry, npages, + (unsigned long)page & IOMMU_PAGE_MASK, + direction, attrs); + + /* ppc_md.tce_build() only returns non-zero for transient errors. + * Clean up the table bitmap in this case and return + * DMA_ERROR_CODE. For all other errors the functionality is + * not altered. + */ + if (unlikely(build_fail)) { + __iommu_free(tbl, ret, npages); + spin_unlock_irqrestore(&(tbl->it_lock), flags); + return DMA_ERROR_CODE; + } /* Flush/invalidate TLB caches if necessary */ if (ppc_md.tce_flush) @@ -276,7 +291,7 @@ int iommu_map_sg(struct device *dev, struct iommu_table *tbl, dma_addr_t dma_next = 0, dma_addr; unsigned long flags; struct scatterlist *s, *outs, *segstart; - int outcount, incount, i; + int outcount, incount, i, build_fail = 0; unsigned int align; unsigned long handle; unsigned int max_seg_size; @@ -337,8 +352,11 @@ int iommu_map_sg(struct device *dev, struct iommu_table *tbl, npages, entry, dma_addr); /* Insert into HW table */ - ppc_md.tce_build(tbl, entry, npages, vaddr & IOMMU_PAGE_MASK, - direction, attrs); + build_fail = ppc_md.tce_build(tbl, entry, npages, + vaddr & IOMMU_PAGE_MASK, + direction, attrs); + if(unlikely(build_fail)) + goto failure; /* If we are in an open segment, try merging */ if (segstart != s) { diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index 031124a8e37..e06420af5fe 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -172,7 +172,7 @@ static void invalidate_tce_cache(struct cbe_iommu *iommu, unsigned long *pte, } } -static void tce_build_cell(struct iommu_table *tbl, long index, long npages, +static int tce_build_cell(struct iommu_table *tbl, long index, long npages, unsigned long uaddr, enum dma_data_direction direction, struct dma_attrs *attrs) { @@ -213,6 +213,7 @@ static void tce_build_cell(struct iommu_table *tbl, long index, long npages, pr_debug("tce_build_cell(index=%lx,n=%lx,dir=%d,base_pte=%lx)\n", index, npages, direction, base_pte); + return 0; } static void tce_free_cell(struct iommu_table *tbl, long index, long npages) diff --git a/arch/powerpc/platforms/iseries/iommu.c b/arch/powerpc/platforms/iseries/iommu.c index bc818e4e203..bb464d1211b 100644 --- a/arch/powerpc/platforms/iseries/iommu.c +++ b/arch/powerpc/platforms/iseries/iommu.c @@ -41,7 +41,7 @@ #include #include -static void tce_build_iSeries(struct iommu_table *tbl, long index, long npages, +static int tce_build_iSeries(struct iommu_table *tbl, long index, long npages, unsigned long uaddr, enum dma_data_direction direction, struct dma_attrs *attrs) { @@ -71,6 +71,7 @@ static void tce_build_iSeries(struct iommu_table *tbl, long index, long npages, index++; uaddr += TCE_PAGE_SIZE; } + return 0; } static void tce_free_iSeries(struct iommu_table *tbl, long index, long npages) diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c index 70541b7a501..a0ff03a3d8d 100644 --- a/arch/powerpc/platforms/pasemi/iommu.c +++ b/arch/powerpc/platforms/pasemi/iommu.c @@ -83,7 +83,7 @@ static u32 *iob_l2_base; static struct iommu_table iommu_table_iobmap; static int iommu_table_iobmap_inited; -static void iobmap_build(struct iommu_table *tbl, long index, +static int iobmap_build(struct iommu_table *tbl, long index, long npages, unsigned long uaddr, enum dma_data_direction direction, struct dma_attrs *attrs) @@ -108,6 +108,7 @@ static void iobmap_build(struct iommu_table *tbl, long index, uaddr += IOBMAP_PAGE_SIZE; bus_addr += IOBMAP_PAGE_SIZE; } + return 0; } diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index 5377dd4b849..a8c446697f9 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -48,7 +48,7 @@ #include "plpar_wrappers.h" -static void tce_build_pSeries(struct iommu_table *tbl, long index, +static int tce_build_pSeries(struct iommu_table *tbl, long index, long npages, unsigned long uaddr, enum dma_data_direction direction, struct dma_attrs *attrs) @@ -72,6 +72,7 @@ static void tce_build_pSeries(struct iommu_table *tbl, long index, uaddr += TCE_PAGE_SIZE; tcep++; } + return 0; } @@ -94,14 +95,19 @@ static unsigned long tce_get_pseries(struct iommu_table *tbl, long index) return *tcep; } -static void tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum, +static void tce_free_pSeriesLP(struct iommu_table*, long, long); +static void tce_freemulti_pSeriesLP(struct iommu_table*, long, long); + +static int tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum, long npages, unsigned long uaddr, enum dma_data_direction direction, struct dma_attrs *attrs) { - u64 rc; + u64 rc = 0; u64 proto_tce, tce; u64 rpn; + int ret = 0; + long tcenum_start = tcenum, npages_start = npages; rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT; proto_tce = TCE_PCI_READ; @@ -112,6 +118,13 @@ static void tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum, tce = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT; rc = plpar_tce_put((u64)tbl->it_index, (u64)tcenum << 12, tce); + if (unlikely(rc == H_NOT_ENOUGH_RESOURCES)) { + ret = (int)rc; + tce_free_pSeriesLP(tbl, tcenum_start, + (npages_start - (npages + 1))); + break; + } + if (rc && printk_ratelimit()) { printk("tce_build_pSeriesLP: plpar_tce_put failed. rc=%ld\n", rc); printk("\tindex = 0x%lx\n", (u64)tbl->it_index); @@ -123,25 +136,27 @@ static void tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum, tcenum++; rpn++; } + return ret; } static DEFINE_PER_CPU(u64 *, tce_page) = NULL; -static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum, +static int tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum, long npages, unsigned long uaddr, enum dma_data_direction direction, struct dma_attrs *attrs) { - u64 rc; + u64 rc = 0; u64 proto_tce; u64 *tcep; u64 rpn; long l, limit; + long tcenum_start = tcenum, npages_start = npages; + int ret = 0; if (npages == 1) { - tce_build_pSeriesLP(tbl, tcenum, npages, uaddr, - direction, attrs); - return; + return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr, + direction, attrs); } tcep = __get_cpu_var(tce_page); @@ -153,9 +168,8 @@ static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum, tcep = (u64 *)__get_free_page(GFP_ATOMIC); /* If allocation fails, fall back to the loop implementation */ if (!tcep) { - tce_build_pSeriesLP(tbl, tcenum, npages, uaddr, + return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr, direction, attrs); - return; } __get_cpu_var(tce_page) = tcep; } @@ -187,6 +201,13 @@ static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum, tcenum += limit; } while (npages > 0 && !rc); + if (unlikely(rc == H_NOT_ENOUGH_RESOURCES)) { + ret = (int)rc; + tce_freemulti_pSeriesLP(tbl, tcenum_start, + (npages_start - (npages + limit))); + return ret; + } + if (rc && printk_ratelimit()) { printk("tce_buildmulti_pSeriesLP: plpar_tce_put failed. rc=%ld\n", rc); printk("\tindex = 0x%lx\n", (u64)tbl->it_index); @@ -194,6 +215,7 @@ static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum, printk("\ttce[0] val = 0x%lx\n", tcep[0]); show_stack(current, (unsigned long *)__get_SP()); } + return ret; } static void tce_free_pSeriesLP(struct iommu_table *tbl, long tcenum, long npages) diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c index de8c8b542cf..89639ecbf38 100644 --- a/arch/powerpc/sysdev/dart_iommu.c +++ b/arch/powerpc/sysdev/dart_iommu.c @@ -147,7 +147,7 @@ static void dart_flush(struct iommu_table *tbl) } } -static void dart_build(struct iommu_table *tbl, long index, +static int dart_build(struct iommu_table *tbl, long index, long npages, unsigned long uaddr, enum dma_data_direction direction, struct dma_attrs *attrs) @@ -184,6 +184,7 @@ static void dart_build(struct iommu_table *tbl, long index, } else { dart_dirty = 1; } + return 0; } -- cgit v1.2.3 From a90ab95a9576d35de0d05f9f4fc435edcccafaa9 Mon Sep 17 00:00:00 2001 From: Robert Jennings Date: Thu, 24 Jul 2008 04:31:33 +1000 Subject: powerpc/pseries: vio bus support for CMO This is a large patch but the normal code path is not affected. For non-pSeries platforms the code is ifdef'ed out and for non-CMO enabled pSeries systems this does not affect the normal code path. Devices that do not perform DMA operations do not need modification with this patch. The function get_desired_dma was renamed from get_io_entitlement for clarity. Overview Cooperative Memory Overcommitment (CMO) allows for a set of OS partitions to be run with less RAM than the aggregate needs of the group of partitions. The firmware will balance memory between the partitions and page in/out memory as needed. Based on the number and type of IO adpaters preset each partition is allocated an amount of memory for DMA operations and this allocation will be guaranteed to the partition; this is referred to as the partition's 'entitlement'. Partitions running in a CMO environment can only have virtual IO devices present. The VIO bus layer will manage the IO entitlement for the system. Accounting, at a system and per-device level, is tracked in the VIO bus code and exposed via sysfs. A set of dma_ops functions are added to the bus to allow for this accounting. Bus initialization At initialization, the bus will calculate the minimum needs of the system based on providing each device present with a standard minimum entitlement along with a spare allocation for the bus to handle hotplug events. If the minimum needs can not be met the system boot will be halted. Device changes The significant changes for devices while running under CMO are that the devices must specify how much dedicated IO entitlement they desire and must also handle DMA mapping errors that can occur due to constrained IO memory. The virtual IO drivers are modified to silence errors when DMA mappings fail for CMO and handle these failures gracefully. Each devices will be guaranteed a minimum entitlement that can always be mapped. Devices will specify how much entitlement they desire and the VIO bus will attempt to provide for this. Devices can change their desired entitlement level at any point in time to address particular needs (via vio_cmo_set_dev_desired()), not just at device probe time. VIO bus changes The system will have a particular entitlement level available from which it can provide memory to the devices. The bus defines two pools of memory within this entitlement, the reserved and excess pools. Each device is provided with it's own entitlement no less than a system defined minimum entitlement and no greater than what the device has specified as it's desired entitlement. The entitlement provided to devices comes from the reserve pool. The reserve pool can also contain a spare allocation as large as the system defined minimum entitlement which is used for device hotplug events. Any entitlement not needed to fulfill the needs of a reserve pool is placed in the excess pool. Each device is guaranteed that it can map up to it's entitled level; additional mapping are possible as long as there is unmapped memory in the excess pool. Bus probe As the system starts, each device is given an entitlement equal only to the system defined minimum entitlement. The reserve pool is equal to the sum of these entitlements, plus a spare allocation. The VIO bus also tracks the aggregate desired entitlement of all the devices. If the system desired entitlement is greater than the size of the reserve pool, when devices unmap IO memory it will be reserved and a balance operation will be scheduled for some time in the future. Entitlement balancing The balance function tries to fairly distribute entitlement between the devices in the system with the goal of providing each device with it's desired amount of entitlement. Devices using more than what would be ideal will have their entitled set-point adjusted; this will effectively set a goal for lower IO memory usage as future mappings can fail and deallocations will trigger a balance operation to distribute the newly unmapped memory. A fair distribution of entitlement can take several balance operations to achieve. Entitlement changes and device DLPAR events will alter the state of CMO and will trigger balance operations. Hotplug events The VIO bus allows for changes in system entitlement at run-time via 'vio_cmo_entitlement_update()'. When devices are added the hotplug device event will be preceded by a system entitlement increase and this is reversed when devices are removed. The following changes are made that the VIO bus layer for CMO: * add IO memory accounting per device structure. * add IO memory entitlement query function to driver structure. * during vio bus probe, if CMO is enabled, check that driver has memory entitlement query function defined. Fail if function not defined. * fail to register driver if io entitlement function not defined. * create set of dma_ops at vio level for CMO that will track allocations and return DMA failures once entitlement is reached. Entitlement will limited by overall system entitlement. Devices will have a reserved quantity of memory that is guaranteed, the rest can be used as available. * expose entitlement, current allocation, desired allocation, and the allocation error counter for devices to the user through sysfs * provide mechanism for changing a device's desired entitlement at run time for devices as an exported function and sysfs tunable * track any DMA failures for entitled IO memory for each vio device. * check entitlement against available system entitlement on device add * track entitlement metrics (high water mark, current usage) * provide function to reset high water mark * provide minimum and desired entitlement numbers at a bus level * provide drivers with a minimum guaranteed entitlement * balance available entitlement between devices to satisfy their needs * handle system entitlement changes and device hotplug Signed-off-by: Robert Jennings Acked-by: Paul Mackerras Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/vio.c | 1033 ++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 1027 insertions(+), 6 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c index b77f8af7ddd..ade8aeaa2e7 100644 --- a/arch/powerpc/kernel/vio.c +++ b/arch/powerpc/kernel/vio.c @@ -1,11 +1,12 @@ /* * IBM PowerPC Virtual I/O Infrastructure Support. * - * Copyright (c) 2003-2005 IBM Corp. + * Copyright (c) 2003,2008 IBM Corp. * Dave Engebretsen engebret@us.ibm.com * Santiago Leon santil@us.ibm.com * Hollis Blanchard * Stephen Rothwell + * Robert Jennings * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -46,6 +47,996 @@ static struct vio_dev vio_bus_device = { /* fake "parent" device */ .dev.bus = &vio_bus_type, }; +#ifdef CONFIG_PPC_SMLPAR +/** + * vio_cmo_pool - A pool of IO memory for CMO use + * + * @size: The size of the pool in bytes + * @free: The amount of free memory in the pool + */ +struct vio_cmo_pool { + size_t size; + size_t free; +}; + +/* How many ms to delay queued balance work */ +#define VIO_CMO_BALANCE_DELAY 100 + +/* Portion out IO memory to CMO devices by this chunk size */ +#define VIO_CMO_BALANCE_CHUNK 131072 + +/** + * vio_cmo_dev_entry - A device that is CMO-enabled and requires entitlement + * + * @vio_dev: struct vio_dev pointer + * @list: pointer to other devices on bus that are being tracked + */ +struct vio_cmo_dev_entry { + struct vio_dev *viodev; + struct list_head list; +}; + +/** + * vio_cmo - VIO bus accounting structure for CMO entitlement + * + * @lock: spinlock for entire structure + * @balance_q: work queue for balancing system entitlement + * @device_list: list of CMO-enabled devices requiring entitlement + * @entitled: total system entitlement in bytes + * @reserve: pool of memory from which devices reserve entitlement, incl. spare + * @excess: pool of excess entitlement not needed for device reserves or spare + * @spare: IO memory for device hotplug functionality + * @min: minimum necessary for system operation + * @desired: desired memory for system operation + * @curr: bytes currently allocated + * @high: high water mark for IO data usage + */ +struct vio_cmo { + spinlock_t lock; + struct delayed_work balance_q; + struct list_head device_list; + size_t entitled; + struct vio_cmo_pool reserve; + struct vio_cmo_pool excess; + size_t spare; + size_t min; + size_t desired; + size_t curr; + size_t high; +} vio_cmo; + +/** + * vio_cmo_OF_devices - Count the number of OF devices that have DMA windows + */ +static int vio_cmo_num_OF_devs(void) +{ + struct device_node *node_vroot; + int count = 0; + + /* + * Count the number of vdevice entries with an + * ibm,my-dma-window OF property + */ + node_vroot = of_find_node_by_name(NULL, "vdevice"); + if (node_vroot) { + struct device_node *of_node; + struct property *prop; + + for_each_child_of_node(node_vroot, of_node) { + prop = of_find_property(of_node, "ibm,my-dma-window", + NULL); + if (prop) + count++; + } + } + of_node_put(node_vroot); + return count; +} + +/** + * vio_cmo_alloc - allocate IO memory for CMO-enable devices + * + * @viodev: VIO device requesting IO memory + * @size: size of allocation requested + * + * Allocations come from memory reserved for the devices and any excess + * IO memory available to all devices. The spare pool used to service + * hotplug must be equal to %VIO_CMO_MIN_ENT for the excess pool to be + * made available. + * + * Return codes: + * 0 for successful allocation and -ENOMEM for a failure + */ +static inline int vio_cmo_alloc(struct vio_dev *viodev, size_t size) +{ + unsigned long flags; + size_t reserve_free = 0; + size_t excess_free = 0; + int ret = -ENOMEM; + + spin_lock_irqsave(&vio_cmo.lock, flags); + + /* Determine the amount of free entitlement available in reserve */ + if (viodev->cmo.entitled > viodev->cmo.allocated) + reserve_free = viodev->cmo.entitled - viodev->cmo.allocated; + + /* If spare is not fulfilled, the excess pool can not be used. */ + if (vio_cmo.spare >= VIO_CMO_MIN_ENT) + excess_free = vio_cmo.excess.free; + + /* The request can be satisfied */ + if ((reserve_free + excess_free) >= size) { + vio_cmo.curr += size; + if (vio_cmo.curr > vio_cmo.high) + vio_cmo.high = vio_cmo.curr; + viodev->cmo.allocated += size; + size -= min(reserve_free, size); + vio_cmo.excess.free -= size; + ret = 0; + } + + spin_unlock_irqrestore(&vio_cmo.lock, flags); + return ret; +} + +/** + * vio_cmo_dealloc - deallocate IO memory from CMO-enable devices + * @viodev: VIO device freeing IO memory + * @size: size of deallocation + * + * IO memory is freed by the device back to the correct memory pools. + * The spare pool is replenished first from either memory pool, then + * the reserve pool is used to reduce device entitlement, the excess + * pool is used to increase the reserve pool toward the desired entitlement + * target, and then the remaining memory is returned to the pools. + * + */ +static inline void vio_cmo_dealloc(struct vio_dev *viodev, size_t size) +{ + unsigned long flags; + size_t spare_needed = 0; + size_t excess_freed = 0; + size_t reserve_freed = size; + size_t tmp; + int balance = 0; + + spin_lock_irqsave(&vio_cmo.lock, flags); + vio_cmo.curr -= size; + + /* Amount of memory freed from the excess pool */ + if (viodev->cmo.allocated > viodev->cmo.entitled) { + excess_freed = min(reserve_freed, (viodev->cmo.allocated - + viodev->cmo.entitled)); + reserve_freed -= excess_freed; + } + + /* Remove allocation from device */ + viodev->cmo.allocated -= (reserve_freed + excess_freed); + + /* Spare is a subset of the reserve pool, replenish it first. */ + spare_needed = VIO_CMO_MIN_ENT - vio_cmo.spare; + + /* + * Replenish the spare in the reserve pool from the excess pool. + * This moves entitlement into the reserve pool. + */ + if (spare_needed && excess_freed) { + tmp = min(excess_freed, spare_needed); + vio_cmo.excess.size -= tmp; + vio_cmo.reserve.size += tmp; + vio_cmo.spare += tmp; + excess_freed -= tmp; + spare_needed -= tmp; + balance = 1; + } + + /* + * Replenish the spare in the reserve pool from the reserve pool. + * This removes entitlement from the device down to VIO_CMO_MIN_ENT, + * if needed, and gives it to the spare pool. The amount of used + * memory in this pool does not change. + */ + if (spare_needed && reserve_freed) { + tmp = min(spare_needed, min(reserve_freed, + (viodev->cmo.entitled - + VIO_CMO_MIN_ENT))); + + vio_cmo.spare += tmp; + viodev->cmo.entitled -= tmp; + reserve_freed -= tmp; + spare_needed -= tmp; + balance = 1; + } + + /* + * Increase the reserve pool until the desired allocation is met. + * Move an allocation freed from the excess pool into the reserve + * pool and schedule a balance operation. + */ + if (excess_freed && (vio_cmo.desired > vio_cmo.reserve.size)) { + tmp = min(excess_freed, (vio_cmo.desired - vio_cmo.reserve.size)); + + vio_cmo.excess.size -= tmp; + vio_cmo.reserve.size += tmp; + excess_freed -= tmp; + balance = 1; + } + + /* Return memory from the excess pool to that pool */ + if (excess_freed) + vio_cmo.excess.free += excess_freed; + + if (balance) + schedule_delayed_work(&vio_cmo.balance_q, VIO_CMO_BALANCE_DELAY); + spin_unlock_irqrestore(&vio_cmo.lock, flags); +} + +/** + * vio_cmo_entitlement_update - Manage system entitlement changes + * + * @new_entitlement: new system entitlement to attempt to accommodate + * + * Increases in entitlement will be used to fulfill the spare entitlement + * and the rest is given to the excess pool. Decreases, if they are + * possible, come from the excess pool and from unused device entitlement + * + * Returns: 0 on success, -ENOMEM when change can not be made + */ +int vio_cmo_entitlement_update(size_t new_entitlement) +{ + struct vio_dev *viodev; + struct vio_cmo_dev_entry *dev_ent; + unsigned long flags; + size_t avail, delta, tmp; + + spin_lock_irqsave(&vio_cmo.lock, flags); + + /* Entitlement increases */ + if (new_entitlement > vio_cmo.entitled) { + delta = new_entitlement - vio_cmo.entitled; + + /* Fulfill spare allocation */ + if (vio_cmo.spare < VIO_CMO_MIN_ENT) { + tmp = min(delta, (VIO_CMO_MIN_ENT - vio_cmo.spare)); + vio_cmo.spare += tmp; + vio_cmo.reserve.size += tmp; + delta -= tmp; + } + + /* Remaining new allocation goes to the excess pool */ + vio_cmo.entitled += delta; + vio_cmo.excess.size += delta; + vio_cmo.excess.free += delta; + + goto out; + } + + /* Entitlement decreases */ + delta = vio_cmo.entitled - new_entitlement; + avail = vio_cmo.excess.free; + + /* + * Need to check how much unused entitlement each device can + * sacrifice to fulfill entitlement change. + */ + list_for_each_entry(dev_ent, &vio_cmo.device_list, list) { + if (avail >= delta) + break; + + viodev = dev_ent->viodev; + if ((viodev->cmo.entitled > viodev->cmo.allocated) && + (viodev->cmo.entitled > VIO_CMO_MIN_ENT)) + avail += viodev->cmo.entitled - + max_t(size_t, viodev->cmo.allocated, + VIO_CMO_MIN_ENT); + } + + if (delta <= avail) { + vio_cmo.entitled -= delta; + + /* Take entitlement from the excess pool first */ + tmp = min(vio_cmo.excess.free, delta); + vio_cmo.excess.size -= tmp; + vio_cmo.excess.free -= tmp; + delta -= tmp; + + /* + * Remove all but VIO_CMO_MIN_ENT bytes from devices + * until entitlement change is served + */ + list_for_each_entry(dev_ent, &vio_cmo.device_list, list) { + if (!delta) + break; + + viodev = dev_ent->viodev; + tmp = 0; + if ((viodev->cmo.entitled > viodev->cmo.allocated) && + (viodev->cmo.entitled > VIO_CMO_MIN_ENT)) + tmp = viodev->cmo.entitled - + max_t(size_t, viodev->cmo.allocated, + VIO_CMO_MIN_ENT); + viodev->cmo.entitled -= min(tmp, delta); + delta -= min(tmp, delta); + } + } else { + spin_unlock_irqrestore(&vio_cmo.lock, flags); + return -ENOMEM; + } + +out: + schedule_delayed_work(&vio_cmo.balance_q, 0); + spin_unlock_irqrestore(&vio_cmo.lock, flags); + return 0; +} + +/** + * vio_cmo_balance - Balance entitlement among devices + * + * @work: work queue structure for this operation + * + * Any system entitlement above the minimum needed for devices, or + * already allocated to devices, can be distributed to the devices. + * The list of devices is iterated through to recalculate the desired + * entitlement level and to determine how much entitlement above the + * minimum entitlement is allocated to devices. + * + * Small chunks of the available entitlement are given to devices until + * their requirements are fulfilled or there is no entitlement left to give. + * Upon completion sizes of the reserve and excess pools are calculated. + * + * The system minimum entitlement level is also recalculated here. + * Entitlement will be reserved for devices even after vio_bus_remove to + * accommodate reloading the driver. The OF tree is walked to count the + * number of devices present and this will remove entitlement for devices + * that have actually left the system after having vio_bus_remove called. + */ +static void vio_cmo_balance(struct work_struct *work) +{ + struct vio_cmo *cmo; + struct vio_dev *viodev; + struct vio_cmo_dev_entry *dev_ent; + unsigned long flags; + size_t avail = 0, level, chunk, need; + int devcount = 0, fulfilled; + + cmo = container_of(work, struct vio_cmo, balance_q.work); + + spin_lock_irqsave(&vio_cmo.lock, flags); + + /* Calculate minimum entitlement and fulfill spare */ + cmo->min = vio_cmo_num_OF_devs() * VIO_CMO_MIN_ENT; + BUG_ON(cmo->min > cmo->entitled); + cmo->spare = min_t(size_t, VIO_CMO_MIN_ENT, (cmo->entitled - cmo->min)); + cmo->min += cmo->spare; + cmo->desired = cmo->min; + + /* + * Determine how much entitlement is available and reset device + * entitlements + */ + avail = cmo->entitled - cmo->spare; + list_for_each_entry(dev_ent, &vio_cmo.device_list, list) { + viodev = dev_ent->viodev; + devcount++; + viodev->cmo.entitled = VIO_CMO_MIN_ENT; + cmo->desired += (viodev->cmo.desired - VIO_CMO_MIN_ENT); + avail -= max_t(size_t, viodev->cmo.allocated, VIO_CMO_MIN_ENT); + } + + /* + * Having provided each device with the minimum entitlement, loop + * over the devices portioning out the remaining entitlement + * until there is nothing left. + */ + level = VIO_CMO_MIN_ENT; + while (avail) { + fulfilled = 0; + list_for_each_entry(dev_ent, &vio_cmo.device_list, list) { + viodev = dev_ent->viodev; + + if (viodev->cmo.desired <= level) { + fulfilled++; + continue; + } + + /* + * Give the device up to VIO_CMO_BALANCE_CHUNK + * bytes of entitlement, but do not exceed the + * desired level of entitlement for the device. + */ + chunk = min_t(size_t, avail, VIO_CMO_BALANCE_CHUNK); + chunk = min(chunk, (viodev->cmo.desired - + viodev->cmo.entitled)); + viodev->cmo.entitled += chunk; + + /* + * If the memory for this entitlement increase was + * already allocated to the device it does not come + * from the available pool being portioned out. + */ + need = max(viodev->cmo.allocated, viodev->cmo.entitled)- + max(viodev->cmo.allocated, level); + avail -= need; + + } + if (fulfilled == devcount) + break; + level += VIO_CMO_BALANCE_CHUNK; + } + + /* Calculate new reserve and excess pool sizes */ + cmo->reserve.size = cmo->min; + cmo->excess.free = 0; + cmo->excess.size = 0; + need = 0; + list_for_each_entry(dev_ent, &vio_cmo.device_list, list) { + viodev = dev_ent->viodev; + /* Calculated reserve size above the minimum entitlement */ + if (viodev->cmo.entitled) + cmo->reserve.size += (viodev->cmo.entitled - + VIO_CMO_MIN_ENT); + /* Calculated used excess entitlement */ + if (viodev->cmo.allocated > viodev->cmo.entitled) + need += viodev->cmo.allocated - viodev->cmo.entitled; + } + cmo->excess.size = cmo->entitled - cmo->reserve.size; + cmo->excess.free = cmo->excess.size - need; + + cancel_delayed_work(container_of(work, struct delayed_work, work)); + spin_unlock_irqrestore(&vio_cmo.lock, flags); +} + +static void *vio_dma_iommu_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag) +{ + struct vio_dev *viodev = to_vio_dev(dev); + void *ret; + + if (vio_cmo_alloc(viodev, roundup(size, IOMMU_PAGE_SIZE))) { + atomic_inc(&viodev->cmo.allocs_failed); + return NULL; + } + + ret = dma_iommu_ops.alloc_coherent(dev, size, dma_handle, flag); + if (unlikely(ret == NULL)) { + vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE)); + atomic_inc(&viodev->cmo.allocs_failed); + } + + return ret; +} + +static void vio_dma_iommu_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle) +{ + struct vio_dev *viodev = to_vio_dev(dev); + + dma_iommu_ops.free_coherent(dev, size, vaddr, dma_handle); + + vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE)); +} + +static dma_addr_t vio_dma_iommu_map_single(struct device *dev, void *vaddr, + size_t size, + enum dma_data_direction direction, + struct dma_attrs *attrs) +{ + struct vio_dev *viodev = to_vio_dev(dev); + dma_addr_t ret = DMA_ERROR_CODE; + + if (vio_cmo_alloc(viodev, roundup(size, IOMMU_PAGE_SIZE))) { + atomic_inc(&viodev->cmo.allocs_failed); + return ret; + } + + ret = dma_iommu_ops.map_single(dev, vaddr, size, direction, attrs); + if (unlikely(dma_mapping_error(ret))) { + vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE)); + atomic_inc(&viodev->cmo.allocs_failed); + } + + return ret; +} + +static void vio_dma_iommu_unmap_single(struct device *dev, + dma_addr_t dma_handle, size_t size, + enum dma_data_direction direction, + struct dma_attrs *attrs) +{ + struct vio_dev *viodev = to_vio_dev(dev); + + dma_iommu_ops.unmap_single(dev, dma_handle, size, direction, attrs); + + vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE)); +} + +static int vio_dma_iommu_map_sg(struct device *dev, struct scatterlist *sglist, + int nelems, enum dma_data_direction direction, + struct dma_attrs *attrs) +{ + struct vio_dev *viodev = to_vio_dev(dev); + struct scatterlist *sgl; + int ret, count = 0; + size_t alloc_size = 0; + + for (sgl = sglist; count < nelems; count++, sgl++) + alloc_size += roundup(sgl->length, IOMMU_PAGE_SIZE); + + if (vio_cmo_alloc(viodev, alloc_size)) { + atomic_inc(&viodev->cmo.allocs_failed); + return 0; + } + + ret = dma_iommu_ops.map_sg(dev, sglist, nelems, direction, attrs); + + if (unlikely(!ret)) { + vio_cmo_dealloc(viodev, alloc_size); + atomic_inc(&viodev->cmo.allocs_failed); + } + + for (sgl = sglist, count = 0; count < ret; count++, sgl++) + alloc_size -= roundup(sgl->dma_length, IOMMU_PAGE_SIZE); + if (alloc_size) + vio_cmo_dealloc(viodev, alloc_size); + + return ret; +} + +static void vio_dma_iommu_unmap_sg(struct device *dev, + struct scatterlist *sglist, int nelems, + enum dma_data_direction direction, + struct dma_attrs *attrs) +{ + struct vio_dev *viodev = to_vio_dev(dev); + struct scatterlist *sgl; + size_t alloc_size = 0; + int count = 0; + + for (sgl = sglist; count < nelems; count++, sgl++) + alloc_size += roundup(sgl->dma_length, IOMMU_PAGE_SIZE); + + dma_iommu_ops.unmap_sg(dev, sglist, nelems, direction, attrs); + + vio_cmo_dealloc(viodev, alloc_size); +} + +struct dma_mapping_ops vio_dma_mapping_ops = { + .alloc_coherent = vio_dma_iommu_alloc_coherent, + .free_coherent = vio_dma_iommu_free_coherent, + .map_single = vio_dma_iommu_map_single, + .unmap_single = vio_dma_iommu_unmap_single, + .map_sg = vio_dma_iommu_map_sg, + .unmap_sg = vio_dma_iommu_unmap_sg, +}; + +/** + * vio_cmo_set_dev_desired - Set desired entitlement for a device + * + * @viodev: struct vio_dev for device to alter + * @new_desired: new desired entitlement level in bytes + * + * For use by devices to request a change to their entitlement at runtime or + * through sysfs. The desired entitlement level is changed and a balancing + * of system resources is scheduled to run in the future. + */ +void vio_cmo_set_dev_desired(struct vio_dev *viodev, size_t desired) +{ + unsigned long flags; + struct vio_cmo_dev_entry *dev_ent; + int found = 0; + + if (!firmware_has_feature(FW_FEATURE_CMO)) + return; + + spin_lock_irqsave(&vio_cmo.lock, flags); + if (desired < VIO_CMO_MIN_ENT) + desired = VIO_CMO_MIN_ENT; + + /* + * Changes will not be made for devices not in the device list. + * If it is not in the device list, then no driver is loaded + * for the device and it can not receive entitlement. + */ + list_for_each_entry(dev_ent, &vio_cmo.device_list, list) + if (viodev == dev_ent->viodev) { + found = 1; + break; + } + if (!found) + return; + + /* Increase/decrease in desired device entitlement */ + if (desired >= viodev->cmo.desired) { + /* Just bump the bus and device values prior to a balance*/ + vio_cmo.desired += desired - viodev->cmo.desired; + viodev->cmo.desired = desired; + } else { + /* Decrease bus and device values for desired entitlement */ + vio_cmo.desired -= viodev->cmo.desired - desired; + viodev->cmo.desired = desired; + /* + * If less entitlement is desired than current entitlement, move + * any reserve memory in the change region to the excess pool. + */ + if (viodev->cmo.entitled > desired) { + vio_cmo.reserve.size -= viodev->cmo.entitled - desired; + vio_cmo.excess.size += viodev->cmo.entitled - desired; + /* + * If entitlement moving from the reserve pool to the + * excess pool is currently unused, add to the excess + * free counter. + */ + if (viodev->cmo.allocated < viodev->cmo.entitled) + vio_cmo.excess.free += viodev->cmo.entitled - + max(viodev->cmo.allocated, desired); + viodev->cmo.entitled = desired; + } + } + schedule_delayed_work(&vio_cmo.balance_q, 0); + spin_unlock_irqrestore(&vio_cmo.lock, flags); +} + +/** + * vio_cmo_bus_probe - Handle CMO specific bus probe activities + * + * @viodev - Pointer to struct vio_dev for device + * + * Determine the devices IO memory entitlement needs, attempting + * to satisfy the system minimum entitlement at first and scheduling + * a balance operation to take care of the rest at a later time. + * + * Returns: 0 on success, -EINVAL when device doesn't support CMO, and + * -ENOMEM when entitlement is not available for device or + * device entry. + * + */ +static int vio_cmo_bus_probe(struct vio_dev *viodev) +{ + struct vio_cmo_dev_entry *dev_ent; + struct device *dev = &viodev->dev; + struct vio_driver *viodrv = to_vio_driver(dev->driver); + unsigned long flags; + size_t size; + + /* + * Check to see that device has a DMA window and configure + * entitlement for the device. + */ + if (of_get_property(viodev->dev.archdata.of_node, + "ibm,my-dma-window", NULL)) { + /* Check that the driver is CMO enabled and get desired DMA */ + if (!viodrv->get_desired_dma) { + dev_err(dev, "%s: device driver does not support CMO\n", + __func__); + return -EINVAL; + } + + viodev->cmo.desired = IOMMU_PAGE_ALIGN(viodrv->get_desired_dma(viodev)); + if (viodev->cmo.desired < VIO_CMO_MIN_ENT) + viodev->cmo.desired = VIO_CMO_MIN_ENT; + size = VIO_CMO_MIN_ENT; + + dev_ent = kmalloc(sizeof(struct vio_cmo_dev_entry), + GFP_KERNEL); + if (!dev_ent) + return -ENOMEM; + + dev_ent->viodev = viodev; + spin_lock_irqsave(&vio_cmo.lock, flags); + list_add(&dev_ent->list, &vio_cmo.device_list); + } else { + viodev->cmo.desired = 0; + size = 0; + spin_lock_irqsave(&vio_cmo.lock, flags); + } + + /* + * If the needs for vio_cmo.min have not changed since they + * were last set, the number of devices in the OF tree has + * been constant and the IO memory for this is already in + * the reserve pool. + */ + if (vio_cmo.min == ((vio_cmo_num_OF_devs() + 1) * + VIO_CMO_MIN_ENT)) { + /* Updated desired entitlement if device requires it */ + if (size) + vio_cmo.desired += (viodev->cmo.desired - + VIO_CMO_MIN_ENT); + } else { + size_t tmp; + + tmp = vio_cmo.spare + vio_cmo.excess.free; + if (tmp < size) { + dev_err(dev, "%s: insufficient free " + "entitlement to add device. " + "Need %lu, have %lu\n", __func__, + size, (vio_cmo.spare + tmp)); + spin_unlock_irqrestore(&vio_cmo.lock, flags); + return -ENOMEM; + } + + /* Use excess pool first to fulfill request */ + tmp = min(size, vio_cmo.excess.free); + vio_cmo.excess.free -= tmp; + vio_cmo.excess.size -= tmp; + vio_cmo.reserve.size += tmp; + + /* Use spare if excess pool was insufficient */ + vio_cmo.spare -= size - tmp; + + /* Update bus accounting */ + vio_cmo.min += size; + vio_cmo.desired += viodev->cmo.desired; + } + spin_unlock_irqrestore(&vio_cmo.lock, flags); + return 0; +} + +/** + * vio_cmo_bus_remove - Handle CMO specific bus removal activities + * + * @viodev - Pointer to struct vio_dev for device + * + * Remove the device from the cmo device list. The minimum entitlement + * will be reserved for the device as long as it is in the system. The + * rest of the entitlement the device had been allocated will be returned + * to the system. + */ +static void vio_cmo_bus_remove(struct vio_dev *viodev) +{ + struct vio_cmo_dev_entry *dev_ent; + unsigned long flags; + size_t tmp; + + spin_lock_irqsave(&vio_cmo.lock, flags); + if (viodev->cmo.allocated) { + dev_err(&viodev->dev, "%s: device had %lu bytes of IO " + "allocated after remove operation.\n", + __func__, viodev->cmo.allocated); + BUG(); + } + + /* + * Remove the device from the device list being maintained for + * CMO enabled devices. + */ + list_for_each_entry(dev_ent, &vio_cmo.device_list, list) + if (viodev == dev_ent->viodev) { + list_del(&dev_ent->list); + kfree(dev_ent); + break; + } + + /* + * Devices may not require any entitlement and they do not need + * to be processed. Otherwise, return the device's entitlement + * back to the pools. + */ + if (viodev->cmo.entitled) { + /* + * This device has not yet left the OF tree, it's + * minimum entitlement remains in vio_cmo.min and + * vio_cmo.desired + */ + vio_cmo.desired -= (viodev->cmo.desired - VIO_CMO_MIN_ENT); + + /* + * Save min allocation for device in reserve as long + * as it exists in OF tree as determined by later + * balance operation + */ + viodev->cmo.entitled -= VIO_CMO_MIN_ENT; + + /* Replenish spare from freed reserve pool */ + if (viodev->cmo.entitled && (vio_cmo.spare < VIO_CMO_MIN_ENT)) { + tmp = min(viodev->cmo.entitled, (VIO_CMO_MIN_ENT - + vio_cmo.spare)); + vio_cmo.spare += tmp; + viodev->cmo.entitled -= tmp; + } + + /* Remaining reserve goes to excess pool */ + vio_cmo.excess.size += viodev->cmo.entitled; + vio_cmo.excess.free += viodev->cmo.entitled; + vio_cmo.reserve.size -= viodev->cmo.entitled; + + /* + * Until the device is removed it will keep a + * minimum entitlement; this will guarantee that + * a module unload/load will result in a success. + */ + viodev->cmo.entitled = VIO_CMO_MIN_ENT; + viodev->cmo.desired = VIO_CMO_MIN_ENT; + atomic_set(&viodev->cmo.allocs_failed, 0); + } + + spin_unlock_irqrestore(&vio_cmo.lock, flags); +} + +static void vio_cmo_set_dma_ops(struct vio_dev *viodev) +{ + vio_dma_mapping_ops.dma_supported = dma_iommu_ops.dma_supported; + viodev->dev.archdata.dma_ops = &vio_dma_mapping_ops; +} + +/** + * vio_cmo_bus_init - CMO entitlement initialization at bus init time + * + * Set up the reserve and excess entitlement pools based on available + * system entitlement and the number of devices in the OF tree that + * require entitlement in the reserve pool. + */ +static void vio_cmo_bus_init(void) +{ + struct hvcall_mpp_data mpp_data; + int err; + + memset(&vio_cmo, 0, sizeof(struct vio_cmo)); + spin_lock_init(&vio_cmo.lock); + INIT_LIST_HEAD(&vio_cmo.device_list); + INIT_DELAYED_WORK(&vio_cmo.balance_q, vio_cmo_balance); + + /* Get current system entitlement */ + err = h_get_mpp(&mpp_data); + + /* + * On failure, continue with entitlement set to 0, will panic() + * later when spare is reserved. + */ + if (err != H_SUCCESS) { + printk(KERN_ERR "%s: unable to determine system IO "\ + "entitlement. (%d)\n", __func__, err); + vio_cmo.entitled = 0; + } else { + vio_cmo.entitled = mpp_data.entitled_mem; + } + + /* Set reservation and check against entitlement */ + vio_cmo.spare = VIO_CMO_MIN_ENT; + vio_cmo.reserve.size = vio_cmo.spare; + vio_cmo.reserve.size += (vio_cmo_num_OF_devs() * + VIO_CMO_MIN_ENT); + if (vio_cmo.reserve.size > vio_cmo.entitled) { + printk(KERN_ERR "%s: insufficient system entitlement\n", + __func__); + panic("%s: Insufficient system entitlement", __func__); + } + + /* Set the remaining accounting variables */ + vio_cmo.excess.size = vio_cmo.entitled - vio_cmo.reserve.size; + vio_cmo.excess.free = vio_cmo.excess.size; + vio_cmo.min = vio_cmo.reserve.size; + vio_cmo.desired = vio_cmo.reserve.size; +} + +/* sysfs device functions and data structures for CMO */ + +#define viodev_cmo_rd_attr(name) \ +static ssize_t viodev_cmo_##name##_show(struct device *dev, \ + struct device_attribute *attr, \ + char *buf) \ +{ \ + return sprintf(buf, "%lu\n", to_vio_dev(dev)->cmo.name); \ +} + +static ssize_t viodev_cmo_allocs_failed_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct vio_dev *viodev = to_vio_dev(dev); + return sprintf(buf, "%d\n", atomic_read(&viodev->cmo.allocs_failed)); +} + +static ssize_t viodev_cmo_allocs_failed_reset(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct vio_dev *viodev = to_vio_dev(dev); + atomic_set(&viodev->cmo.allocs_failed, 0); + return count; +} + +static ssize_t viodev_cmo_desired_set(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct vio_dev *viodev = to_vio_dev(dev); + size_t new_desired; + int ret; + + ret = strict_strtoul(buf, 10, &new_desired); + if (ret) + return ret; + + vio_cmo_set_dev_desired(viodev, new_desired); + return count; +} + +viodev_cmo_rd_attr(desired); +viodev_cmo_rd_attr(entitled); +viodev_cmo_rd_attr(allocated); + +static ssize_t name_show(struct device *, struct device_attribute *, char *); +static ssize_t devspec_show(struct device *, struct device_attribute *, char *); +static struct device_attribute vio_cmo_dev_attrs[] = { + __ATTR_RO(name), + __ATTR_RO(devspec), + __ATTR(cmo_desired, S_IWUSR|S_IRUSR|S_IWGRP|S_IRGRP|S_IROTH, + viodev_cmo_desired_show, viodev_cmo_desired_set), + __ATTR(cmo_entitled, S_IRUGO, viodev_cmo_entitled_show, NULL), + __ATTR(cmo_allocated, S_IRUGO, viodev_cmo_allocated_show, NULL), + __ATTR(cmo_allocs_failed, S_IWUSR|S_IRUSR|S_IWGRP|S_IRGRP|S_IROTH, + viodev_cmo_allocs_failed_show, viodev_cmo_allocs_failed_reset), + __ATTR_NULL +}; + +/* sysfs bus functions and data structures for CMO */ + +#define viobus_cmo_rd_attr(name) \ +static ssize_t \ +viobus_cmo_##name##_show(struct bus_type *bt, char *buf) \ +{ \ + return sprintf(buf, "%lu\n", vio_cmo.name); \ +} + +#define viobus_cmo_pool_rd_attr(name, var) \ +static ssize_t \ +viobus_cmo_##name##_pool_show_##var(struct bus_type *bt, char *buf) \ +{ \ + return sprintf(buf, "%lu\n", vio_cmo.name.var); \ +} + +static ssize_t viobus_cmo_high_reset(struct bus_type *bt, const char *buf, + size_t count) +{ + unsigned long flags; + + spin_lock_irqsave(&vio_cmo.lock, flags); + vio_cmo.high = vio_cmo.curr; + spin_unlock_irqrestore(&vio_cmo.lock, flags); + + return count; +} + +viobus_cmo_rd_attr(entitled); +viobus_cmo_pool_rd_attr(reserve, size); +viobus_cmo_pool_rd_attr(excess, size); +viobus_cmo_pool_rd_attr(excess, free); +viobus_cmo_rd_attr(spare); +viobus_cmo_rd_attr(min); +viobus_cmo_rd_attr(desired); +viobus_cmo_rd_attr(curr); +viobus_cmo_rd_attr(high); + +static struct bus_attribute vio_cmo_bus_attrs[] = { + __ATTR(cmo_entitled, S_IRUGO, viobus_cmo_entitled_show, NULL), + __ATTR(cmo_reserve_size, S_IRUGO, viobus_cmo_reserve_pool_show_size, NULL), + __ATTR(cmo_excess_size, S_IRUGO, viobus_cmo_excess_pool_show_size, NULL), + __ATTR(cmo_excess_free, S_IRUGO, viobus_cmo_excess_pool_show_free, NULL), + __ATTR(cmo_spare, S_IRUGO, viobus_cmo_spare_show, NULL), + __ATTR(cmo_min, S_IRUGO, viobus_cmo_min_show, NULL), + __ATTR(cmo_desired, S_IRUGO, viobus_cmo_desired_show, NULL), + __ATTR(cmo_curr, S_IRUGO, viobus_cmo_curr_show, NULL), + __ATTR(cmo_high, S_IWUSR|S_IRUSR|S_IWGRP|S_IRGRP|S_IROTH, + viobus_cmo_high_show, viobus_cmo_high_reset), + __ATTR_NULL +}; + +static void vio_cmo_sysfs_init(void) +{ + vio_bus_type.dev_attrs = vio_cmo_dev_attrs; + vio_bus_type.bus_attrs = vio_cmo_bus_attrs; +} +#else /* CONFIG_PPC_SMLPAR */ +/* Dummy functions for iSeries platform */ +int vio_cmo_entitlement_update(size_t new_entitlement) { return 0; } +void vio_cmo_set_dev_desired(struct vio_dev *viodev, size_t desired) {} +static int vio_cmo_bus_probe(struct vio_dev *viodev) { return 0; } +static void vio_cmo_bus_remove(struct vio_dev *viodev) {} +static void vio_cmo_set_dma_ops(struct vio_dev *viodev) {} +static void vio_cmo_bus_init() {} +static void vio_cmo_sysfs_init() { } +#endif /* CONFIG_PPC_SMLPAR */ +EXPORT_SYMBOL(vio_cmo_entitlement_update); +EXPORT_SYMBOL(vio_cmo_set_dev_desired); + static struct iommu_table *vio_build_iommu_table(struct vio_dev *dev) { const unsigned char *dma_window; @@ -114,8 +1105,17 @@ static int vio_bus_probe(struct device *dev) return error; id = vio_match_device(viodrv->id_table, viodev); - if (id) + if (id) { + memset(&viodev->cmo, 0, sizeof(viodev->cmo)); + if (firmware_has_feature(FW_FEATURE_CMO)) { + error = vio_cmo_bus_probe(viodev); + if (error) + return error; + } error = viodrv->probe(viodev, id); + if (error) + vio_cmo_bus_remove(viodev); + } return error; } @@ -125,12 +1125,23 @@ static int vio_bus_remove(struct device *dev) { struct vio_dev *viodev = to_vio_dev(dev); struct vio_driver *viodrv = to_vio_driver(dev->driver); + struct device *devptr; + int ret = 1; + + /* + * Hold a reference to the device after the remove function is called + * to allow for CMO accounting cleanup for the device. + */ + devptr = get_device(dev); if (viodrv->remove) - return viodrv->remove(viodev); + ret = viodrv->remove(viodev); + + if (!ret && firmware_has_feature(FW_FEATURE_CMO)) + vio_cmo_bus_remove(viodev); - /* driver can't remove */ - return 1; + put_device(devptr); + return ret; } /** @@ -215,7 +1226,11 @@ struct vio_dev *vio_register_device_node(struct device_node *of_node) viodev->unit_address = *unit_address; } viodev->dev.archdata.of_node = of_node_get(of_node); - viodev->dev.archdata.dma_ops = &dma_iommu_ops; + + if (firmware_has_feature(FW_FEATURE_CMO)) + vio_cmo_set_dma_ops(viodev); + else + viodev->dev.archdata.dma_ops = &dma_iommu_ops; viodev->dev.archdata.dma_data = vio_build_iommu_table(viodev); viodev->dev.archdata.numa_node = of_node_to_nid(of_node); @@ -245,6 +1260,9 @@ static int __init vio_bus_init(void) int err; struct device_node *node_vroot; + if (firmware_has_feature(FW_FEATURE_CMO)) + vio_cmo_sysfs_init(); + err = bus_register(&vio_bus_type); if (err) { printk(KERN_ERR "failed to register VIO bus\n"); @@ -262,6 +1280,9 @@ static int __init vio_bus_init(void) return err; } + if (firmware_has_feature(FW_FEATURE_CMO)) + vio_cmo_bus_init(); + node_vroot = of_find_node_by_name(NULL, "vdevice"); if (node_vroot) { struct device_node *of_node; -- cgit v1.2.3 From 22e1a4dd3f2a9009d1d8896a5e833b6094877008 Mon Sep 17 00:00:00 2001 From: Nathan Fontenot Date: Thu, 24 Jul 2008 04:31:52 +1000 Subject: powerpc/pseries: Verify CMO memory entitlement updates with virtual I/O Verify memory entitlement updates can be handled by vio. Signed-off-by: Nathan Fontenot Signed-off-by: Robert Jennings Acked-by: Paul Mackerras Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/lparcfg.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index 848c3e5a637..64381a204a5 100644 --- a/arch/powerpc/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -34,6 +34,7 @@ #include #include #include +#include #define MODULE_VERS "1.8" #define MODULE_NAME "lparcfg" @@ -527,6 +528,15 @@ static ssize_t update_mpp(u64 *entitlement, u8 *weight) u8 new_weight; ssize_t rc; + if (entitlement) { + /* Check with vio to ensure the new memory entitlement + * can be handled. + */ + rc = vio_cmo_entitlement_update(*entitlement); + if (rc) + return rc; + } + rc = h_get_mpp(&mpp_data); if (rc) return rc; -- cgit v1.2.3 From 8391e42a5c1f3d757faa5e7f46a4a68f9aa6cb12 Mon Sep 17 00:00:00 2001 From: Nathan Fontenot Date: Thu, 24 Jul 2008 04:36:38 +1000 Subject: powerpc/pseries: Update arch vector to indicate support for CMO Update the architecture vector to indicate that Cooperative Memory Overcommitment is supported if CONFIG_PPC_SMLPAR is set. Signed-off-by: Nathan Fontenot Signed-off-by: Robert Jennings Acked-by: Paul Mackerras Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/prom_init.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 1ea8c8d3ce8..c4ab2195b9c 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -643,6 +643,11 @@ static void __init early_cmdline_parse(void) #else #define OV5_MSI 0x00 #endif /* CONFIG_PCI_MSI */ +#ifdef CONFIG_PPC_SMLPAR +#define OV5_CMO 0x80 /* Cooperative Memory Overcommitment */ +#else +#define OV5_CMO 0x00 +#endif /* * The architecture vector has an array of PVR mask/value pairs, @@ -687,10 +692,12 @@ static unsigned char ibm_architecture_vec[] = { 0, /* don't halt */ /* option vector 5: PAPR/OF options */ - 3 - 2, /* length */ + 5 - 2, /* length */ 0, /* don't ignore, don't halt */ OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES | OV5_DRCONF_MEMORY | OV5_DONATE_DEDICATE_CPU | OV5_MSI, + 0, + OV5_CMO, }; /* Old method - ELF header with PT_NOTE sections */ -- cgit v1.2.3 From 16c14b4621c7b6fc4611abf1f86cd78cdb1b2b03 Mon Sep 17 00:00:00 2001 From: Nathan Fontenot Date: Thu, 24 Jul 2008 05:10:46 +1000 Subject: powerpc/pseries: Remove kmalloc call in handling writes to lparcfg There are only 4 valid name=value pairs for writes to /proc/ppc64/lparcfg. Current code allocates a buffer to copy this information in from the user. Since the longest name=value pair will easily fit into a buffer of 64 characters, simply put the buffer on the stack instead of allocating the buffer. Signed-off-by: Nathan Fotenot Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/lparcfg.c | 28 ++++++++++++---------------- 1 file changed, 12 insertions(+), 16 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index 64381a204a5..9f856a0c3e3 100644 --- a/arch/powerpc/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -573,29 +573,27 @@ static ssize_t update_mpp(u64 *entitlement, u8 *weight) static ssize_t lparcfg_write(struct file *file, const char __user * buf, size_t count, loff_t * off) { - char *kbuf; + int kbuf_sz = 64; + char kbuf[kbuf_sz]; char *tmp; u64 new_entitled, *new_entitled_ptr = &new_entitled; u8 new_weight, *new_weight_ptr = &new_weight; - ssize_t retval = -ENOMEM; + ssize_t retval; if (!firmware_has_feature(FW_FEATURE_SPLPAR) || firmware_has_feature(FW_FEATURE_ISERIES)) return -EINVAL; - kbuf = kmalloc(count, GFP_KERNEL); - if (!kbuf) - goto out; + if (count > kbuf_sz) + return -EINVAL; - retval = -EFAULT; if (copy_from_user(kbuf, buf, count)) - goto out; + return -EFAULT; - retval = -EINVAL; kbuf[count - 1] = '\0'; tmp = strchr(kbuf, '='); if (!tmp) - goto out; + return -EINVAL; *tmp++ = '\0'; @@ -603,32 +601,32 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf, char *endp; *new_entitled_ptr = (u64) simple_strtoul(tmp, &endp, 10); if (endp == tmp) - goto out; + return -EINVAL; retval = update_ppp(new_entitled_ptr, NULL); } else if (!strcmp(kbuf, "capacity_weight")) { char *endp; *new_weight_ptr = (u8) simple_strtoul(tmp, &endp, 10); if (endp == tmp) - goto out; + return -EINVAL; retval = update_ppp(NULL, new_weight_ptr); } else if (!strcmp(kbuf, "entitled_memory")) { char *endp; *new_entitled_ptr = (u64) simple_strtoul(tmp, &endp, 10); if (endp == tmp) - goto out; + return -EINVAL; retval = update_mpp(new_entitled_ptr, NULL); } else if (!strcmp(kbuf, "entitled_memory_weight")) { char *endp; *new_weight_ptr = (u8) simple_strtoul(tmp, &endp, 10); if (endp == tmp) - goto out; + return -EINVAL; retval = update_mpp(NULL, new_weight_ptr); } else - goto out; + return -EINVAL; if (retval == H_SUCCESS || retval == H_CONSTRAINED) { retval = count; @@ -644,8 +642,6 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf, retval = -EIO; } -out: - kfree(kbuf); return retval; } -- cgit v1.2.3 From 58340a07c194e0aed7bc58b61ff24330bb2a409f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 25 Jul 2008 01:45:33 -0700 Subject: introduce HAVE_EFFICIENT_UNALIGNED_ACCESS Kconfig symbol In many cases, especially in networking, it can be beneficial to know at compile time whether the architecture can do unaligned accesses efficiently. This patch introduces a new Kconfig symbol HAVE_EFFICIENT_UNALIGNED_ACCESS for that purpose and adds it to the powerpc and x86 architectures. Also add some documentation about alignment and networking, and especially one intended use of this symbol. Signed-off-by: Johannes Berg Acked-by: Sam Ravnborg Acked-by: Ingo Molnar [x86 architecture part] Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index a487671c282..de6b49cd6be 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -112,6 +112,7 @@ config PPC select HAVE_FTRACE select HAVE_IDE select HAVE_IOREMAP_PROT + select HAVE_EFFICIENT_UNALIGNED_ACCESS select HAVE_KPROBES select HAVE_ARCH_KGDB select HAVE_KRETPROBES -- cgit v1.2.3 From ef53d9c5e4da147ecaa43c44c5e5945eb83970a2 Mon Sep 17 00:00:00 2001 From: Srinivasa D S Date: Fri, 25 Jul 2008 01:46:04 -0700 Subject: kprobes: improve kretprobe scalability with hashed locking Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS Signed-off-by: Jim Keniston Acked-by: Ananth N Mavinakayanahalli Cc: Anil S Keshavamurthy Cc: David S. Miller Cc: Masami Hiramatsu Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/kernel/kprobes.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c index 4ba2af12545..de79915452c 100644 --- a/arch/powerpc/kernel/kprobes.c +++ b/arch/powerpc/kernel/kprobes.c @@ -144,7 +144,6 @@ static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs, kcb->kprobe_saved_msr = regs->msr; } -/* Called with kretprobe_lock held */ void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri, struct pt_regs *regs) { @@ -312,8 +311,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p, unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline; INIT_HLIST_HEAD(&empty_rp); - spin_lock_irqsave(&kretprobe_lock, flags); - head = kretprobe_inst_table_head(current); + kretprobe_hash_lock(current, &head, &flags); /* * It is possible to have multiple instances associated with a given @@ -352,7 +350,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p, regs->nip = orig_ret_address; reset_current_kprobe(); - spin_unlock_irqrestore(&kretprobe_lock, flags); + kretprobe_hash_unlock(current, &flags); preempt_enable_no_resched(); hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) { -- cgit v1.2.3 From 7444a72effa632fcd8edc566f880d96fe213c73b Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Fri, 25 Jul 2008 01:46:11 -0700 Subject: gpiolib: allow user-selection This patch adds functionality to the gpio-lib subsystem to make it possible to enable the gpio-lib code even if the architecture code didn't request to get it built in. The archtitecture code does still need to implement the gpiolib accessor functions in its asm/gpio.h file. This patch adds the implementations for x86 and PPC. With these changes it is possible to run generic GPIO expansion cards on every architecture that implements the trivial wrapper functions. Support for more architectures can easily be added. Signed-off-by: Michael Buesch Cc: Benjamin Herrenschmidt Cc: Stephen Rothwell Cc: David Brownell Cc: Russell King Cc: Haavard Skinnemoen Cc: Jesper Nilsson Cc: Ralf Baechle Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Jean Delvare Cc: Samuel Ortiz Cc: Kumar Gala Cc: Sam Ravnborg Cc: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/Kconfig | 1 + arch/powerpc/platforms/52xx/Kconfig | 2 +- arch/powerpc/sysdev/qe_lib/Kconfig | 2 +- 3 files changed, 3 insertions(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index de6b49cd6be..fe88418167c 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -110,6 +110,7 @@ config PPC default y select HAVE_DYNAMIC_FTRACE select HAVE_FTRACE + select ARCH_WANT_OPTIONAL_GPIOLIB select HAVE_IDE select HAVE_IOREMAP_PROT select HAVE_EFFICIENT_UNALIGNED_ACCESS diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig index d664b1bce38..ccbd4958412 100644 --- a/arch/powerpc/platforms/52xx/Kconfig +++ b/arch/powerpc/platforms/52xx/Kconfig @@ -48,6 +48,6 @@ config PPC_MPC5200_BUGFIX config PPC_MPC5200_GPIO bool "MPC5200 GPIO support" depends on PPC_MPC52xx - select HAVE_GPIO_LIB + select ARCH_REQUIRE_GPIOLIB help Enable gpiolib support for mpc5200 based boards diff --git a/arch/powerpc/sysdev/qe_lib/Kconfig b/arch/powerpc/sysdev/qe_lib/Kconfig index 4bb18f57901..1ce546462be 100644 --- a/arch/powerpc/sysdev/qe_lib/Kconfig +++ b/arch/powerpc/sysdev/qe_lib/Kconfig @@ -29,7 +29,7 @@ config QE_GPIO bool "QE GPIO support" depends on QUICC_ENGINE select GENERIC_GPIO - select HAVE_GPIO_LIB + select ARCH_REQUIRE_GPIOLIB help Say Y here if you're going to use hardware that connects to the QE GPIOs. -- cgit v1.2.3 From 0b21bb49187a863e3fc3c4f3356baf03578a9d1a Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 25 Jul 2008 14:22:02 -0500 Subject: powerpc: clean up the Book-E HW watchpoint support * CONFIG_BOOKE is selected by CONFIG_44x so we dont need both * Fixed a few comments * Go back to only using DBCR0_IDM to determine if we are using debug resources. Signed-off-by: Kumar Gala --- arch/powerpc/kernel/entry_32.S | 6 +++--- arch/powerpc/kernel/process.c | 8 ++++---- arch/powerpc/kernel/ptrace.c | 7 ++++--- arch/powerpc/kernel/signal.c | 2 +- 4 files changed, 12 insertions(+), 11 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index 81c8324a4a3..da52269aec1 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -148,7 +148,7 @@ transfer_to_handler: /* Check to see if the dbcr0 register is set up to debug. Use the internal debug mode bit to do this. */ lwz r12,THREAD_DBCR0(r12) - andis. r12,r12,(DBCR0_IDM | DBSR_DAC1R | DBSR_DAC1W)@h + andis. r12,r12,DBCR0_IDM@h beq+ 3f /* From user and task is ptraced - load up global dbcr0 */ li r12,-1 /* clear all pending debug events */ @@ -292,7 +292,7 @@ syscall_exit_cont: /* If the process has its own DBCR0 value, load it up. The internal debug mode bit tells us that dbcr0 should be loaded. */ lwz r0,THREAD+THREAD_DBCR0(r2) - andis. r10,r0,(DBCR0_IDM | DBSR_DAC1R | DBSR_DAC1W)@h + andis. r10,r0,DBCR0_IDM@h bnel- load_dbcr0 #endif #ifdef CONFIG_44x @@ -720,7 +720,7 @@ restore_user: /* Check whether this process has its own DBCR0 value. The internal debug mode bit tells us that dbcr0 should be loaded. */ lwz r0,THREAD+THREAD_DBCR0(r2) - andis. r10,r0,(DBCR0_IDM | DBSR_DAC1R | DBSR_DAC1W)@h + andis. r10,r0,DBCR0_IDM@h bnel- load_dbcr0 #endif diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index db2497ccc11..e030f3bd502 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -254,7 +254,7 @@ void do_dabr(struct pt_regs *regs, unsigned long address, return; /* Clear the DAC and struct entries. One shot trigger */ -#if (defined(CONFIG_44x) || defined(CONFIG_BOOKE)) +#if defined(CONFIG_BOOKE) mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~(DBSR_DAC1R | DBSR_DAC1W | DBCR0_IDM)); #endif @@ -286,7 +286,7 @@ int set_dabr(unsigned long dabr) mtspr(SPRN_DABR, dabr); #endif -#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) +#if defined(CONFIG_BOOKE) mtspr(SPRN_DAC1, dabr); #endif @@ -373,7 +373,7 @@ struct task_struct *__switch_to(struct task_struct *prev, if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr)) set_dabr(new->thread.dabr); -#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) +#if defined(CONFIG_BOOKE) /* If new thread DAC (HW breakpoint) is the same then leave it */ if (new->thread.dabr) set_dabr(new->thread.dabr); @@ -568,7 +568,7 @@ void flush_thread(void) current->thread.dabr = 0; set_dabr(0); -#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) +#if defined(CONFIG_BOOKE) current->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W); #endif } diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index a5d0e78779c..66204cb51a1 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -717,7 +717,7 @@ void user_disable_single_step(struct task_struct *task) struct pt_regs *regs = task->thread.regs; -#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) +#if defined(CONFIG_BOOKE) /* If DAC then do not single step, skip */ if (task->thread.dabr) return; @@ -744,10 +744,11 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, if (addr > 0) return -EINVAL; + /* The bottom 3 bits in dabr are flags */ if ((data & ~0x7UL) >= TASK_SIZE) return -EIO; -#ifdef CONFIG_PPC64 +#ifndef CONFIG_BOOKE /* For processors using DABR (i.e. 970), the bottom 3 bits are flags. * It was assumed, on previous implementations, that 3 bits were @@ -769,7 +770,7 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, task->thread.dabr = data; #endif -#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) +#if defined(CONFIG_BOOKE) /* As described above, it was assumed 3 bits were passed with the data * address, but we will assume only the mode bits will be passed diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c index 7aada783ec6..2b5eaa6c8f3 100644 --- a/arch/powerpc/kernel/signal.c +++ b/arch/powerpc/kernel/signal.c @@ -147,7 +147,7 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs) */ if (current->thread.dabr) { set_dabr(current->thread.dabr); -#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) +#if defined(CONFIG_BOOKE) mtspr(SPRN_DBCR0, current->thread.dbcr0); #endif } -- cgit v1.2.3 From fc532f810832beb3306b42526a78f411972281c7 Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Fri, 25 Jul 2008 17:50:30 -0500 Subject: powerpc: Fix boot problem due to AT_BASE_PLATFORM change Commit 9115d13453dee22473a1e8cacc90a8d64a9c4bc9 ("powerpc: Enable AT_BASE_PLATFORM aux vector") broke boot on 32-bit powerpc systems; we have to use PTRRELOC to initialize powerpc_base_platform this early in boot. Bug reported by Jon Smirl. Signed-off-by: Nathan Lynch Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/cputable.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 25a052c1675..25c273c761d 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -1660,8 +1660,8 @@ struct cpu_spec * __init identify_cpu(unsigned long offset, unsigned int pvr) * Set the base platform string once; assumes * we're called with real pvr first. */ - if (powerpc_base_platform == NULL) - powerpc_base_platform = t->platform; + if (*PTRRELOC(&powerpc_base_platform) == NULL) + *PTRRELOC(&powerpc_base_platform) = t->platform; #if defined(CONFIG_PPC64) || defined(CONFIG_BOOKE) /* ppc64 and booke expect identify_cpu to also call -- cgit v1.2.3 From 8d8bb39b9eba32dd70e87fd5ad5c5dd4ba118e06 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Fri, 25 Jul 2008 19:44:49 -0700 Subject: dma-mapping: add the device argument to dma_mapping_error() Add per-device dma_mapping_ops support for CONFIG_X86_64 as POWER architecture does: This enables us to cleanly fix the Calgary IOMMU issue that some devices are not behind the IOMMU (http://lkml.org/lkml/2008/5/8/423). I think that per-device dma_mapping_ops support would be also helpful for KVM people to support PCI passthrough but Andi thinks that this makes it difficult to support the PCI passthrough (see the above thread). So I CC'ed this to KVM camp. Comments are appreciated. A pointer to dma_mapping_ops to struct dev_archdata is added. If the pointer is non NULL, DMA operations in asm/dma-mapping.h use it. If it's NULL, the system-wide dma_ops pointer is used as before. If it's useful for KVM people, I plan to implement a mechanism to register a hook called when a new pci (or dma capable) device is created (it works with hot plugging). It enables IOMMUs to set up an appropriate dma_mapping_ops per device. The major obstacle is that dma_mapping_error doesn't take a pointer to the device unlike other DMA operations. So x86 can't have dma_mapping_ops per device. Note all the POWER IOMMUs use the same dma_mapping_error function so this is not a problem for POWER but x86 IOMMUs use different dma_mapping_error functions. The first patch adds the device argument to dma_mapping_error. The patch is trivial but large since it touches lots of drivers and dma-mapping.h in all the architecture. This patch: dma_mapping_error() doesn't take a pointer to the device unlike other DMA operations. So we can't have dma_mapping_ops per device. Note that POWER already has dma_mapping_ops per device but all the POWER IOMMUs use the same dma_mapping_error function. x86 IOMMUs use device argument. [akpm@linux-foundation.org: fix sge] [akpm@linux-foundation.org: fix svc_rdma] [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: fix bnx2x] [akpm@linux-foundation.org: fix s2io] [akpm@linux-foundation.org: fix pasemi_mac] [akpm@linux-foundation.org: fix sdhci] [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: fix sparc] [akpm@linux-foundation.org: fix ibmvscsi] Signed-off-by: FUJITA Tomonori Cc: Muli Ben-Yehuda Cc: Andi Kleen Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Avi Kivity Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/platforms/cell/celleb_scc_pciex.c | 2 +- arch/powerpc/platforms/cell/spider-pci.c | 2 +- arch/powerpc/platforms/iseries/mf.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/celleb_scc_pciex.c b/arch/powerpc/platforms/cell/celleb_scc_pciex.c index 0e04f8fb152..3e7e0f1568e 100644 --- a/arch/powerpc/platforms/cell/celleb_scc_pciex.c +++ b/arch/powerpc/platforms/cell/celleb_scc_pciex.c @@ -281,7 +281,7 @@ static int __init scc_pciex_iowa_init(struct iowa_bus *bus, void *data) dummy_page_da = dma_map_single(bus->phb->parent, dummy_page_va, PAGE_SIZE, DMA_FROM_DEVICE); - if (dma_mapping_error(dummy_page_da)) { + if (dma_mapping_error(bus->phb->parent, dummy_page_da)) { pr_err("PCIEX:Map dummy page failed.\n"); kfree(dummy_page_va); return -1; diff --git a/arch/powerpc/platforms/cell/spider-pci.c b/arch/powerpc/platforms/cell/spider-pci.c index 418b605ac35..5122ec14527 100644 --- a/arch/powerpc/platforms/cell/spider-pci.c +++ b/arch/powerpc/platforms/cell/spider-pci.c @@ -111,7 +111,7 @@ static int __init spiderpci_pci_setup_chip(struct pci_controller *phb, dummy_page_da = dma_map_single(phb->parent, dummy_page_va, PAGE_SIZE, DMA_FROM_DEVICE); - if (dma_mapping_error(dummy_page_da)) { + if (dma_mapping_error(phb->parent, dummy_page_da)) { pr_err("SPIDER-IOWA:Map dummy page filed.\n"); kfree(dummy_page_va); return -1; diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c index 1dc7295746d..731d7b15774 100644 --- a/arch/powerpc/platforms/iseries/mf.c +++ b/arch/powerpc/platforms/iseries/mf.c @@ -871,7 +871,7 @@ static int proc_mf_dump_cmdline(char *page, char **start, off_t off, count = 256 - off; dma_addr = iseries_hv_map(page, off + count, DMA_FROM_DEVICE); - if (dma_mapping_error(dma_addr)) + if (dma_mapping_error(NULL, dma_addr)) return -ENOMEM; memset(page, 0, off + count); memset(&vsp_cmd, 0, sizeof(vsp_cmd)); -- cgit v1.2.3 From 3ab83521378268044a448113c6aa9a9e245f4d2f Mon Sep 17 00:00:00 2001 From: Huang Ying Date: Fri, 25 Jul 2008 19:45:07 -0700 Subject: kexec jump This patch provides an enhancement to kexec/kdump. It implements the following features: - Backup/restore memory used by the original kernel before/after kexec. - Save/restore CPU state before/after kexec. The features of this patch can be used as a general method to call program in physical mode (paging turning off). This can be used to call BIOS code under Linux. kexec-tools needs to be patched to support kexec jump. The patches and the precompiled kexec can be download from the following URL: source: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec-tools-src_git_kh10.tar.bz2 patches: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec-tools-patches_git_kh10.tar.bz2 binary: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec_git_kh10 Usage example of calling some physical mode code and return: 1. Compile and install patched kernel with following options selected: CONFIG_X86_32=y CONFIG_KEXEC=y CONFIG_PM=y CONFIG_KEXEC_JUMP=y 2. Build patched kexec-tool or download the pre-built one. 3. Build some physical mode executable named such as "phy_mode" 4. Boot kernel compiled in step 1. 5. Load physical mode executable with /sbin/kexec. The shell command line can be as follow: /sbin/kexec --load-preserve-context --args-none phy_mode 6. Call physical mode executable with following shell command line: /sbin/kexec -e Implementation point: To support jumping without reserving memory. One shadow backup page (source page) is allocated for each page used by kexeced code image (destination page). When do kexec_load, the image of kexeced code is loaded into source pages, and before executing, the destination pages and the source pages are swapped, so the contents of destination pages are backupped. Before jumping to the kexeced code image and after jumping back to the original kernel, the destination pages and the source pages are swapped too. C ABI (calling convention) is used as communication protocol between kernel and called code. A flag named KEXEC_PRESERVE_CONTEXT for sys_kexec_load is added to indicate that the loaded kernel image is used for jumping back. Now, only the i386 architecture is supported. Signed-off-by: Huang Ying Acked-by: Vivek Goyal Cc: "Eric W. Biederman" Cc: Pavel Machek Cc: Nigel Cunningham Cc: "Rafael J. Wysocki" Cc: Ingo Molnar Cc: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/kernel/machine_kexec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c index 29a0e039d43..aab76887a84 100644 --- a/arch/powerpc/kernel/machine_kexec.c +++ b/arch/powerpc/kernel/machine_kexec.c @@ -48,7 +48,7 @@ void machine_kexec_cleanup(struct kimage *image) * Do not allocate memory (or fail in any way) in machine_kexec(). * We are past the point of no return, committed to rebooting now. */ -NORET_TYPE void machine_kexec(struct kimage *image) +void machine_kexec(struct kimage *image) { if (ppc_md.machine_kexec) ppc_md.machine_kexec(image); -- cgit v1.2.3 From 51cc50685a4275c6a02653670af9f108a64e01cf Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Fri, 25 Jul 2008 19:45:34 -0700 Subject: SL*B: drop kmem cache argument from constructor Kmem cache passed to constructor is only needed for constructors that are themselves multiplexeres. Nobody uses this "feature", nor does anybody uses passed kmem cache in non-trivial way, so pass only pointer to object. Non-trivial places are: arch/powerpc/mm/init_64.c arch/powerpc/mm/hugetlbpage.c This is flag day, yes. Signed-off-by: Alexey Dobriyan Acked-by: Pekka Enberg Acked-by: Christoph Lameter Cc: Jon Tollefson Cc: Nick Piggin Cc: Matt Mackall [akpm@linux-foundation.org: fix arch/powerpc/mm/hugetlbpage.c] [akpm@linux-foundation.org: fix mm/slab.c] [akpm@linux-foundation.org: fix ubifs] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/kernel/rtas_flash.c | 2 +- arch/powerpc/mm/hugetlbpage.c | 9 ++------- arch/powerpc/mm/init_64.c | 24 +++++++++--------------- arch/powerpc/platforms/cell/spufs/inode.c | 2 +- 4 files changed, 13 insertions(+), 24 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c index 09ded5c424a..149cb112cd1 100644 --- a/arch/powerpc/kernel/rtas_flash.c +++ b/arch/powerpc/kernel/rtas_flash.c @@ -286,7 +286,7 @@ static ssize_t rtas_flash_read(struct file *file, char __user *buf, } /* constructor for flash_block_cache */ -void rtas_block_ctor(struct kmem_cache *cache, void *ptr) +void rtas_block_ctor(void *ptr) { memset(ptr, 0, RTAS_BLK_SIZE); } diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index fb42c4dd321..ed0aab0208a 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -113,7 +113,7 @@ static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr, static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp, unsigned long address, unsigned int psize) { - pte_t *new = kmem_cache_alloc(huge_pgtable_cache(psize), + pte_t *new = kmem_cache_zalloc(huge_pgtable_cache(psize), GFP_KERNEL|__GFP_REPEAT); if (! new) @@ -730,11 +730,6 @@ static int __init hugepage_setup_sz(char *str) } __setup("hugepagesz=", hugepage_setup_sz); -static void zero_ctor(struct kmem_cache *cache, void *addr) -{ - memset(addr, 0, kmem_cache_size(cache)); -} - static int __init hugetlbpage_init(void) { unsigned int psize; @@ -756,7 +751,7 @@ static int __init hugetlbpage_init(void) HUGEPTE_TABLE_SIZE(psize), HUGEPTE_TABLE_SIZE(psize), 0, - zero_ctor); + NULL); if (!huge_pgtable_cache(psize)) panic("hugetlbpage_init(): could not create %s"\ "\n", HUGEPTE_CACHE_NAME(psize)); diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index a41bc5aa204..4f7df85129d 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -136,9 +136,14 @@ static int __init setup_kcore(void) module_init(setup_kcore); #endif -static void zero_ctor(struct kmem_cache *cache, void *addr) +static void pgd_ctor(void *addr) { - memset(addr, 0, kmem_cache_size(cache)); + memset(addr, 0, PGD_TABLE_SIZE); +} + +static void pmd_ctor(void *addr) +{ + memset(addr, 0, PMD_TABLE_SIZE); } static const unsigned int pgtable_cache_size[2] = { @@ -163,19 +168,8 @@ struct kmem_cache *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)]; void pgtable_cache_init(void) { - int i; - - for (i = 0; i < ARRAY_SIZE(pgtable_cache_size); i++) { - int size = pgtable_cache_size[i]; - const char *name = pgtable_cache_name[i]; - - pr_debug("Allocating page table cache %s (#%d) " - "for size: %08x...\n", name, i, size); - pgtable_cache[i] = kmem_cache_create(name, - size, size, - SLAB_PANIC, - zero_ctor); - } + pgtable_cache[0] = kmem_cache_create(pgtable_cache_name[0], PGD_TABLE_SIZE, PGD_TABLE_SIZE, SLAB_PANIC, pgd_ctor); + pgtable_cache[1] = kmem_cache_create(pgtable_cache_name[1], PMD_TABLE_SIZE, PMD_TABLE_SIZE, SLAB_PANIC, pmd_ctor); } #ifdef CONFIG_SPARSEMEM_VMEMMAP diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c index 7123472801d..690ca7b0dcf 100644 --- a/arch/powerpc/platforms/cell/spufs/inode.c +++ b/arch/powerpc/platforms/cell/spufs/inode.c @@ -78,7 +78,7 @@ spufs_destroy_inode(struct inode *inode) } static void -spufs_init_once(struct kmem_cache *cachep, void *p) +spufs_init_once(void *p) { struct spufs_inode_info *ei = p; -- cgit v1.2.3 From bda2fa535564ace56a395d5b65c6dc81305401fa Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Fri, 25 Jul 2008 19:46:14 -0700 Subject: powerpc: use generic show_mem() Remove arch-specific show_mem() in favor of the generic version. This also removes the following redundant information display: - pages in swapcache, printed by show_swap_cache_info() where show_mem() calls show_free_areas(), which calls show_swap_cache_info(). Signed-off-by: Johannes Weiner Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/mm/mem.c | 39 --------------------------------------- 1 file changed, 39 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 1ca2235f096..702691cb9e8 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -186,45 +186,6 @@ walk_memory_resource(unsigned long start_pfn, unsigned long nr_pages, void *arg, } EXPORT_SYMBOL_GPL(walk_memory_resource); -void show_mem(void) -{ - unsigned long total = 0, reserved = 0; - unsigned long shared = 0, cached = 0; - unsigned long highmem = 0; - struct page *page; - pg_data_t *pgdat; - unsigned long i; - - printk("Mem-info:\n"); - show_free_areas(); - for_each_online_pgdat(pgdat) { - unsigned long flags; - pgdat_resize_lock(pgdat, &flags); - for (i = 0; i < pgdat->node_spanned_pages; i++) { - if (!pfn_valid(pgdat->node_start_pfn + i)) - continue; - page = pgdat_page_nr(pgdat, i); - total++; - if (PageHighMem(page)) - highmem++; - if (PageReserved(page)) - reserved++; - else if (PageSwapCache(page)) - cached++; - else if (page_count(page)) - shared += page_count(page) - 1; - } - pgdat_resize_unlock(pgdat, &flags); - } - printk("%ld pages of RAM\n", total); -#ifdef CONFIG_HIGHMEM - printk("%ld pages of HIGHMEM\n", highmem); -#endif - printk("%ld reserved pages\n", reserved); - printk("%ld pages shared\n", shared); - printk("%ld pages swap cached\n", cached); -} - /* * Initialize the bootmem system and give it all the memory we * have available. If we are using highmem, we only put the -- cgit v1.2.3 From cc04454fa81e93b5f1b5133950331639d2f59f85 Mon Sep 17 00:00:00 2001 From: Hollis Blanchard Date: Fri, 25 Jul 2008 13:54:50 -0500 Subject: KVM: ppc: fix invalidation of large guest pages When guest invalidates a large tlb map, there may be more than one corresponding shadow tlb maps that need to be invalidated. Use eaddr and eend to find these shadow tlb maps. Signed-off-by: Liu Yu Signed-off-by: Hollis Blanchard Signed-off-by: Avi Kivity --- arch/powerpc/kvm/44x_tlb.c | 5 +++-- arch/powerpc/kvm/emulate.c | 2 +- 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kvm/44x_tlb.c b/arch/powerpc/kvm/44x_tlb.c index 75dff7cfa81..5a5602da509 100644 --- a/arch/powerpc/kvm/44x_tlb.c +++ b/arch/powerpc/kvm/44x_tlb.c @@ -177,7 +177,8 @@ void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gfn_t gfn, u64 asid, vcpu->arch.msr & MSR_PR); } -void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, u64 eaddr, u64 asid) +void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, gva_t eaddr, + gva_t eend, u32 asid) { unsigned int pid = asid & 0xff; int i; @@ -191,7 +192,7 @@ void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, u64 eaddr, u64 asid) if (!get_tlb_v(stlbe)) continue; - if (eaddr < get_tlb_eaddr(stlbe)) + if (eend < get_tlb_eaddr(stlbe)) continue; if (eaddr > get_tlb_end(stlbe)) diff --git a/arch/powerpc/kvm/emulate.c b/arch/powerpc/kvm/emulate.c index 00009746128..8c605d0a548 100644 --- a/arch/powerpc/kvm/emulate.c +++ b/arch/powerpc/kvm/emulate.c @@ -137,7 +137,7 @@ static int kvmppc_emul_tlbwe(struct kvm_vcpu *vcpu, u32 inst) if (tlbe->word0 & PPC44x_TLB_VALID) { eaddr = get_tlb_eaddr(tlbe); asid = (tlbe->word0 & PPC44x_TLB_TS) | tlbe->tid; - kvmppc_mmu_invalidate(vcpu, eaddr, asid); + kvmppc_mmu_invalidate(vcpu, eaddr, get_tlb_end(tlbe), asid); } switch (ws) { -- cgit v1.2.3 From d3b060231b2e1eb7e7e9680ff93326a4ae576720 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Thu, 24 Jul 2008 00:44:51 +1000 Subject: powerpc: Removed duplicated include in stacktrace.c Removed duplicated include file in arch/powerpc/kernel/stacktrace.c. Signed-off-by: Huang Weiyi Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/stacktrace.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/stacktrace.c b/arch/powerpc/kernel/stacktrace.c index f2589645870..b0dbb1daa4d 100644 --- a/arch/powerpc/kernel/stacktrace.c +++ b/arch/powerpc/kernel/stacktrace.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include -- cgit v1.2.3 From 2325f0a0c3d76bb515f3312ab2b16afdbffcc594 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 26 Jul 2008 05:27:33 +1000 Subject: powerpc/booke: Clean up the hardware watchpoint support * CONFIG_BOOKE is selected by CONFIG_44x so we dont need both * Fixed a few comments * Go back to only using DBCR0_IDM to determine if we are using debug resources. Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/entry_32.S | 6 +++--- arch/powerpc/kernel/process.c | 8 ++++---- arch/powerpc/kernel/ptrace.c | 7 ++++--- arch/powerpc/kernel/signal.c | 2 +- 4 files changed, 12 insertions(+), 11 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index 81c8324a4a3..da52269aec1 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -148,7 +148,7 @@ transfer_to_handler: /* Check to see if the dbcr0 register is set up to debug. Use the internal debug mode bit to do this. */ lwz r12,THREAD_DBCR0(r12) - andis. r12,r12,(DBCR0_IDM | DBSR_DAC1R | DBSR_DAC1W)@h + andis. r12,r12,DBCR0_IDM@h beq+ 3f /* From user and task is ptraced - load up global dbcr0 */ li r12,-1 /* clear all pending debug events */ @@ -292,7 +292,7 @@ syscall_exit_cont: /* If the process has its own DBCR0 value, load it up. The internal debug mode bit tells us that dbcr0 should be loaded. */ lwz r0,THREAD+THREAD_DBCR0(r2) - andis. r10,r0,(DBCR0_IDM | DBSR_DAC1R | DBSR_DAC1W)@h + andis. r10,r0,DBCR0_IDM@h bnel- load_dbcr0 #endif #ifdef CONFIG_44x @@ -720,7 +720,7 @@ restore_user: /* Check whether this process has its own DBCR0 value. The internal debug mode bit tells us that dbcr0 should be loaded. */ lwz r0,THREAD+THREAD_DBCR0(r2) - andis. r10,r0,(DBCR0_IDM | DBSR_DAC1R | DBSR_DAC1W)@h + andis. r10,r0,DBCR0_IDM@h bnel- load_dbcr0 #endif diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index db2497ccc11..e030f3bd502 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -254,7 +254,7 @@ void do_dabr(struct pt_regs *regs, unsigned long address, return; /* Clear the DAC and struct entries. One shot trigger */ -#if (defined(CONFIG_44x) || defined(CONFIG_BOOKE)) +#if defined(CONFIG_BOOKE) mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~(DBSR_DAC1R | DBSR_DAC1W | DBCR0_IDM)); #endif @@ -286,7 +286,7 @@ int set_dabr(unsigned long dabr) mtspr(SPRN_DABR, dabr); #endif -#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) +#if defined(CONFIG_BOOKE) mtspr(SPRN_DAC1, dabr); #endif @@ -373,7 +373,7 @@ struct task_struct *__switch_to(struct task_struct *prev, if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr)) set_dabr(new->thread.dabr); -#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) +#if defined(CONFIG_BOOKE) /* If new thread DAC (HW breakpoint) is the same then leave it */ if (new->thread.dabr) set_dabr(new->thread.dabr); @@ -568,7 +568,7 @@ void flush_thread(void) current->thread.dabr = 0; set_dabr(0); -#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) +#if defined(CONFIG_BOOKE) current->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W); #endif } diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index a5d0e78779c..66204cb51a1 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -717,7 +717,7 @@ void user_disable_single_step(struct task_struct *task) struct pt_regs *regs = task->thread.regs; -#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) +#if defined(CONFIG_BOOKE) /* If DAC then do not single step, skip */ if (task->thread.dabr) return; @@ -744,10 +744,11 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, if (addr > 0) return -EINVAL; + /* The bottom 3 bits in dabr are flags */ if ((data & ~0x7UL) >= TASK_SIZE) return -EIO; -#ifdef CONFIG_PPC64 +#ifndef CONFIG_BOOKE /* For processors using DABR (i.e. 970), the bottom 3 bits are flags. * It was assumed, on previous implementations, that 3 bits were @@ -769,7 +770,7 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, task->thread.dabr = data; #endif -#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) +#if defined(CONFIG_BOOKE) /* As described above, it was assumed 3 bits were passed with the data * address, but we will assume only the mode bits will be passed diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c index 7aada783ec6..2b5eaa6c8f3 100644 --- a/arch/powerpc/kernel/signal.c +++ b/arch/powerpc/kernel/signal.c @@ -147,7 +147,7 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs) */ if (current->thread.dabr) { set_dabr(current->thread.dabr); -#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) +#if defined(CONFIG_BOOKE) mtspr(SPRN_DBCR0, current->thread.dbcr0); #endif } -- cgit v1.2.3 From b9fa49a9a908407d9366b0e1e7222aee81a2df5b Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Sat, 26 Jul 2008 09:06:17 +1000 Subject: powerpc: Fix vio build warnings MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit arch/powerpc/kernel/vio.c:1034: warning: function declaration isn’t a prototype arch/powerpc/kernel/vio.c:1035: warning: function declaration isn’t a prototype Signed-off-by: Nathan Lynch Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/vio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c index ade8aeaa2e7..6952384cf89 100644 --- a/arch/powerpc/kernel/vio.c +++ b/arch/powerpc/kernel/vio.c @@ -1031,8 +1031,8 @@ void vio_cmo_set_dev_desired(struct vio_dev *viodev, size_t desired) {} static int vio_cmo_bus_probe(struct vio_dev *viodev) { return 0; } static void vio_cmo_bus_remove(struct vio_dev *viodev) {} static void vio_cmo_set_dma_ops(struct vio_dev *viodev) {} -static void vio_cmo_bus_init() {} -static void vio_cmo_sysfs_init() { } +static void vio_cmo_bus_init(void) {} +static void vio_cmo_sysfs_init(void) { } #endif /* CONFIG_PPC_SMLPAR */ EXPORT_SYMBOL(vio_cmo_entitlement_update); EXPORT_SYMBOL(vio_cmo_set_dev_desired); -- cgit v1.2.3 From 7d2f6075f992d33c7be829c3638b8cb72b782b19 Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Sun, 27 Jul 2008 15:24:50 +1000 Subject: powerpc: kill useless SMT code in prom_hold_cpus This piece of code is broken for >2 threads, and possibly in some other subtle ways (such as comparing a value obtained from an "ibm,ppc-interrupt-server#s" property to a value obtained from a "reg" property) and doesn't seem to have any useful purpose in the first place other than a dubious warning in case NR_CPUS is too small, which probably isn't the right place to do so. Signed-off-by: Nathan Lynch Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/prom_init.c | 39 +++------------------------------------ 1 file changed, 3 insertions(+), 36 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index c4ab2195b9c..b72849ac7db 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -205,8 +205,6 @@ static int __initdata mem_reserve_cnt; static cell_t __initdata regbuf[1024]; -#define MAX_CPU_THREADS 2 - /* * Error results ... some OF calls will return "-1" on error, some * will return 0, some will return either. To simplify, here are @@ -1339,10 +1337,6 @@ static void __init prom_hold_cpus(void) unsigned int reg; phandle node; char type[64]; - int cpuid = 0; - unsigned int interrupt_server[MAX_CPU_THREADS]; - unsigned int cpu_threads, hw_cpu_num; - int propsize; struct prom_t *_prom = &RELOC(prom); unsigned long *spinloop = (void *) LOW_ADDR(__secondary_hold_spinloop); @@ -1386,7 +1380,6 @@ static void __init prom_hold_cpus(void) reg = -1; prom_getprop(node, "reg", ®, sizeof(reg)); - prom_debug("\ncpuid = 0x%x\n", cpuid); prom_debug("cpu hw idx = 0x%x\n", reg); /* Init the acknowledge var which will be reset by @@ -1395,28 +1388,9 @@ static void __init prom_hold_cpus(void) */ *acknowledge = (unsigned long)-1; - propsize = prom_getprop(node, "ibm,ppc-interrupt-server#s", - &interrupt_server, - sizeof(interrupt_server)); - if (propsize < 0) { - /* no property. old hardware has no SMT */ - cpu_threads = 1; - interrupt_server[0] = reg; /* fake it with phys id */ - } else { - /* We have a threaded processor */ - cpu_threads = propsize / sizeof(u32); - if (cpu_threads > MAX_CPU_THREADS) { - prom_printf("SMT: too many threads!\n" - "SMT: found %x, max is %x\n", - cpu_threads, MAX_CPU_THREADS); - cpu_threads = 1; /* ToDo: panic? */ - } - } - - hw_cpu_num = interrupt_server[0]; - if (hw_cpu_num != _prom->cpu) { + if (reg != _prom->cpu) { /* Primary Thread of non-boot cpu */ - prom_printf("%x : starting cpu hw idx %x... ", cpuid, reg); + prom_printf("starting cpu hw idx %x... ", reg); call_prom("start-cpu", 3, 0, node, secondary_hold, reg); @@ -1431,17 +1405,10 @@ static void __init prom_hold_cpus(void) } #ifdef CONFIG_SMP else - prom_printf("%x : boot cpu %x\n", cpuid, reg); + prom_printf("boot cpu hw idx %x\n", reg); #endif /* CONFIG_SMP */ - - /* Reserve cpu #s for secondary threads. They start later. */ - cpuid += cpu_threads; } - if (cpuid > NR_CPUS) - prom_printf("WARNING: maximum CPUs (" __stringify(NR_CPUS) - ") exceeded: ignoring extras\n"); - prom_debug("prom_hold_cpus: end...\n"); } -- cgit v1.2.3 From 9ba1984ead5d25c93d241e0ee43f8f6a252f60d9 Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Sun, 27 Jul 2008 15:24:51 +1000 Subject: powerpc: register_cpu_online should be __cpuinit It is called only in cpu online paths. (caught by CONFIG_DEBUG_SECTION_MISMATCH=y) Signed-off-by: Nathan Lynch Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/sysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index 800e5e9a087..156808086ca 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -298,7 +298,7 @@ static struct sysdev_attribute pa6t_attrs[] = { }; -static void register_cpu_online(unsigned int cpu) +static void __cpuinit register_cpu_online(unsigned int cpu) { struct cpu *c = &per_cpu(cpu_devices, cpu); struct sys_device *s = &c->sysdev; -- cgit v1.2.3 From e2075f79a99b45a6cc10de021c93f07212098a84 Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Sun, 27 Jul 2008 15:24:52 +1000 Subject: powerpc: Update cpu_sibling_maps dynamically Rather doing one initialization pass over all the per-cpu cpu_sibling_maps at boot, update the maps at cpu online/offline time. This is a behavior change -- the thread_siblings attribute now reflects only online siblings, whereas it would display offline siblings before. The new behavior matches that of x86, and is arguably more useful. Signed-off-by: Nathan Lynch Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/setup-common.c | 24 ------------------------ arch/powerpc/kernel/setup_64.c | 3 --- arch/powerpc/kernel/smp.c | 32 +++++++++++++++++++++++++++++--- 3 files changed, 29 insertions(+), 30 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 61a3f413208..9cc5a52711e 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -367,7 +367,6 @@ static void __init cpu_init_thread_core_maps(int tpc) * setup_cpu_maps - initialize the following cpu maps: * cpu_possible_map * cpu_present_map - * cpu_sibling_map * * Having the possible map set up early allows us to restrict allocations * of things like irqstacks to num_possible_cpus() rather than NR_CPUS. @@ -475,29 +474,6 @@ void __init smp_setup_cpu_maps(void) */ cpu_init_thread_core_maps(nthreads); } - -/* - * Being that cpu_sibling_map is now a per_cpu array, then it cannot - * be initialized until the per_cpu areas have been created. This - * function is now called from setup_per_cpu_areas(). - */ -void __init smp_setup_cpu_sibling_map(void) -{ -#ifdef CONFIG_PPC64 - int i, cpu, base; - - for_each_possible_cpu(cpu) { - DBG("Sibling map for CPU %d:", cpu); - base = cpu_first_thread_in_core(cpu); - for (i = 0; i < threads_per_core; i++) { - cpu_set(base + i, per_cpu(cpu_sibling_map, cpu)); - DBG(" %d", base + i); - } - DBG("\n"); - } - -#endif /* CONFIG_PPC64 */ -} #endif /* CONFIG_SMP */ #ifdef CONFIG_PCSPKR_PLATFORM diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 04d8de9f0fc..8b25f51f03b 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -611,9 +611,6 @@ void __init setup_per_cpu_areas(void) paca[i].data_offset = ptr - __per_cpu_start; memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start); } - - /* Now that per_cpu is setup, initialize cpu_sibling_map */ - smp_setup_cpu_sibling_map(); } #endif diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index f5ae9fa222e..3c4d07e5e06 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -41,6 +41,7 @@ #include #include #include +#include #include #include #include @@ -228,6 +229,7 @@ void __devinit smp_prepare_boot_cpu(void) BUG_ON(smp_processor_id() != boot_cpuid); cpu_set(boot_cpuid, cpu_online_map); + cpu_set(boot_cpuid, per_cpu(cpu_sibling_map, boot_cpuid)); #ifdef CONFIG_PPC64 paca[boot_cpuid].__current = current; #endif @@ -380,6 +382,7 @@ int __cpuinit __cpu_up(unsigned int cpu) int __devinit start_secondary(void *unused) { unsigned int cpu = smp_processor_id(); + int i, base; atomic_inc(&init_mm.mm_count); current->active_mm = &init_mm; @@ -400,6 +403,14 @@ int __devinit start_secondary(void *unused) ipi_call_lock(); cpu_set(cpu, cpu_online_map); + /* Update sibling maps */ + base = cpu_first_thread_in_core(cpu); + for (i = 0; i < threads_per_core; i++) { + if (cpu_is_offline(base + i)) + continue; + cpu_set(cpu, per_cpu(cpu_sibling_map, base + i)); + cpu_set(base + i, per_cpu(cpu_sibling_map, cpu)); + } ipi_call_unlock(); local_irq_enable(); @@ -437,10 +448,25 @@ void __init smp_cpus_done(unsigned int max_cpus) #ifdef CONFIG_HOTPLUG_CPU int __cpu_disable(void) { - if (smp_ops->cpu_disable) - return smp_ops->cpu_disable(); + int cpu = smp_processor_id(); + int base, i; + int err; - return -ENOSYS; + if (!smp_ops->cpu_disable) + return -ENOSYS; + + err = smp_ops->cpu_disable(); + if (err) + return err; + + /* Update sibling maps */ + base = cpu_first_thread_in_core(cpu); + for (i = 0; i < threads_per_core; i++) { + cpu_clear(cpu, per_cpu(cpu_sibling_map, base + i)); + cpu_clear(base + i, per_cpu(cpu_sibling_map, cpu)); + } + + return 0; } void __cpu_die(unsigned int cpu) -- cgit v1.2.3 From 6558ba2b5cc3a2f22039db30616fcd07c1b28ac8 Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Sun, 27 Jul 2008 16:49:50 +1000 Subject: powerpc: Call tracehook_signal_handler() when setting up signal frames This makes the powerpc signal handling code call tracehook_signal_handler() after a handler is set up. This means that using PTRACE_SINGLESTEP to enter a signal handler will report to ptrace on the first instruction of the handler, instead of the second. This is consistent with what x86 and other machines do, and what users and debuggers want. BenH: Fixed up the test for the trap value. Signed-off-by: Roland McGrath Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/signal.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c index 2b5eaa6c8f3..e74aa0ed4e9 100644 --- a/arch/powerpc/kernel/signal.c +++ b/arch/powerpc/kernel/signal.c @@ -9,7 +9,7 @@ * this archive for more details. */ -#include +#include #include #include #include @@ -177,6 +177,12 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs) * its frame, and we can clear the TLF_RESTORE_SIGMASK flag. */ current_thread_info()->local_flags &= ~_TLF_RESTORE_SIGMASK; + + /* + * Let tracing know that we've done the handler setup. + */ + tracehook_signal_handler(signr, &info, &ka, regs, + test_thread_flag(TIF_SINGLESTEP)); } return ret; -- cgit v1.2.3 From 4f72c4279eab1e5f3ed1ac4e55d4527617582392 Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Sun, 27 Jul 2008 16:51:03 +1000 Subject: powerpc: Make syscall tracing use tracehook.h helpers This changes powerpc syscall tracing to use the new tracehook.h entry points. There is no change, only cleanup. In addition, the assembly changes allow do_syscall_trace_enter() to abort the syscall without losing the information about the original r0 value. Signed-off-by: Roland McGrath Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/entry_32.S | 7 ++++++- arch/powerpc/kernel/entry_64.S | 7 ++++++- arch/powerpc/kernel/ptrace.c | 47 ++++++++++++++++++++---------------------- 3 files changed, 34 insertions(+), 27 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index da52269aec1..e6fca6a9014 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -343,7 +343,12 @@ syscall_dotrace: stw r0,_TRAP(r1) addi r3,r1,STACK_FRAME_OVERHEAD bl do_syscall_trace_enter - lwz r0,GPR0(r1) /* Restore original registers */ + /* + * Restore argument registers possibly just changed. + * We use the return value of do_syscall_trace_enter + * for call number to look up in the table (r0). + */ + mr r0,r3 lwz r3,GPR3(r1) lwz r4,GPR4(r1) lwz r5,GPR5(r1) diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index d7369243ae4..79c089e97ce 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -214,7 +214,12 @@ syscall_dotrace: bl .save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD bl .do_syscall_trace_enter - ld r0,GPR0(r1) /* Restore original registers */ + /* + * Restore argument registers possibly just changed. + * We use the return value of do_syscall_trace_enter + * for the call number to look up in the table (r0). + */ + mr r0,r3 ld r3,GPR3(r1) ld r4,GPR4(r1) ld r5,GPR5(r1) diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 66204cb51a1..6b66cd85b43 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -1014,31 +1015,24 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) return ret; } -static void do_syscall_trace(void) +/* + * We must return the syscall number to actually look up in the table. + * This can be -1L to skip running any syscall at all. + */ +long do_syscall_trace_enter(struct pt_regs *regs) { - /* the 0x80 provides a way for the tracing parent to distinguish - between a syscall stop and SIGTRAP delivery */ - ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) - ? 0x80 : 0)); - - /* - * this isn't the same as continuing with a signal, but it will do - * for normal use. strace only continues with a signal if the - * stopping signal is not SIGTRAP. -brl - */ - if (current->exit_code) { - send_sig(current->exit_code, current, 1); - current->exit_code = 0; - } -} + long ret = 0; -void do_syscall_trace_enter(struct pt_regs *regs) -{ secure_computing(regs->gpr[0]); - if (test_thread_flag(TIF_SYSCALL_TRACE) - && (current->ptrace & PT_PTRACED)) - do_syscall_trace(); + if (test_thread_flag(TIF_SYSCALL_TRACE) && + tracehook_report_syscall_entry(regs)) + /* + * Tracing decided this syscall should not happen. + * We'll return a bogus call number to get an ENOSYS + * error, but leave the original number in regs->gpr[0]. + */ + ret = -1L; if (unlikely(current->audit_context)) { #ifdef CONFIG_PPC64 @@ -1056,16 +1050,19 @@ void do_syscall_trace_enter(struct pt_regs *regs) regs->gpr[5] & 0xffffffff, regs->gpr[6] & 0xffffffff); } + + return ret ?: regs->gpr[0]; } void do_syscall_trace_leave(struct pt_regs *regs) { + int step; + if (unlikely(current->audit_context)) audit_syscall_exit((regs->ccr&0x10000000)?AUDITSC_FAILURE:AUDITSC_SUCCESS, regs->result); - if ((test_thread_flag(TIF_SYSCALL_TRACE) - || test_thread_flag(TIF_SINGLESTEP)) - && (current->ptrace & PT_PTRACED)) - do_syscall_trace(); + step = test_thread_flag(TIF_SINGLESTEP); + if (step || test_thread_flag(TIF_SYSCALL_TRACE)) + tracehook_report_syscall_exit(regs, step); } -- cgit v1.2.3 From 7d6d637dac2050f30a1b57b0a3dc5de4a10616ba Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Sun, 27 Jul 2008 16:52:52 +1000 Subject: powerpc: Add TIF_NOTIFY_RESUME support for tracehook This adds TIF_NOTIFY_RESUME support for powerpc. When set, we call tracehook_notify_resume() on the way to user mode. This overloads do_signal() to do the work, but changes its arguments to it has the TIF_* bits handy in a register and drops the useless first argument that was always zero. Signed-off-by: Roland McGrath Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/entry_32.S | 4 ++-- arch/powerpc/kernel/entry_64.S | 3 +-- arch/powerpc/kernel/signal.c | 13 ++++++++++++- 3 files changed, 15 insertions(+), 5 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index e6fca6a9014..1cbbf703364 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -1060,8 +1060,8 @@ do_user_signal: /* r10 contains MSR_KERNEL here */ SAVE_NVGPRS(r1) rlwinm r3,r3,0,0,30 stw r3,_TRAP(r1) -2: li r3,0 - addi r4,r1,STACK_FRAME_OVERHEAD +2: addi r3,r1,STACK_FRAME_OVERHEAD + mr r4,r9 bl do_signal REST_NVGPRS(r1) b recheck diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 79c089e97ce..2d802e97097 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -643,8 +643,7 @@ user_work: b .ret_from_except_lite 1: bl .save_nvgprs - li r3,0 - addi r4,r1,STACK_FRAME_OVERHEAD + addi r3,r1,STACK_FRAME_OVERHEAD bl .do_signal b .ret_from_except diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c index e74aa0ed4e9..a54405ebd7b 100644 --- a/arch/powerpc/kernel/signal.c +++ b/arch/powerpc/kernel/signal.c @@ -112,7 +112,7 @@ static void check_syscall_restart(struct pt_regs *regs, struct k_sigaction *ka, } } -int do_signal(sigset_t *oldset, struct pt_regs *regs) +static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs) { siginfo_t info; int signr; @@ -188,6 +188,17 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs) return ret; } +void do_signal(struct pt_regs *regs, unsigned long thread_info_flags) +{ + if (thread_info_flags & _TIF_SIGPENDING) + do_signal_pending(NULL, regs); + + if (thread_info_flags & _TIF_NOTIFY_RESUME) { + clear_thread_flag(TIF_NOTIFY_RESUME); + tracehook_notify_resume(regs); + } +} + long sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, unsigned long r5, unsigned long r6, unsigned long r7, unsigned long r8, struct pt_regs *regs) -- cgit v1.2.3 From dec2b0d0cc64e495a3c9c5700fa7a3b397b5e855 Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Sun, 27 Jul 2008 16:53:20 +1000 Subject: powerpc: Enable tracehook for the architecture The powerpc arch code has all the prerequisites, so set HAVE_ARCH_TRACEHOOK. Signed-off-by: Roland McGrath Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index fe88418167c..587da5e0990 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -117,6 +117,7 @@ config PPC select HAVE_KPROBES select HAVE_ARCH_KGDB select HAVE_KRETPROBES + select HAVE_ARCH_TRACEHOOK select HAVE_LMB select HAVE_DMA_ATTRS if PPC64 select USE_GENERIC_SMP_HELPERS if SMP -- cgit v1.2.3 From 3cee67f77922721e90c1573d84c07e18c5508713 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Mon, 28 Jul 2008 00:51:02 +1000 Subject: powerpc/pseries: Fix CMO sysdev attribute API change fallout Noticed due to these wanings: arch/powerpc/platforms/pseries/cmm.c:298: warning: initialization from incompatible pointer type arch/powerpc/platforms/pseries/cmm.c:299: warning: initialization from incompatible pointer type arch/powerpc/platforms/pseries/cmm.c:320: warning: initialization from incompatible pointer type arch/powerpc/platforms/pseries/cmm.c:320: warning: initialization from incompatible pointer type Signed-off-by: Stephen Rothwell Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/cmm.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/pseries/cmm.c b/arch/powerpc/platforms/pseries/cmm.c index c6b3be03168..38fe32a7cc7 100644 --- a/arch/powerpc/platforms/pseries/cmm.c +++ b/arch/powerpc/platforms/pseries/cmm.c @@ -289,7 +289,9 @@ static int cmm_thread(void *dummy) } #define CMM_SHOW(name, format, args...) \ - static ssize_t show_##name(struct sys_device *dev, char *buf) \ + static ssize_t show_##name(struct sys_device *dev, \ + struct sysdev_attribute *attr, \ + char *buf) \ { \ return sprintf(buf, format, ##args); \ } \ @@ -298,12 +300,14 @@ static int cmm_thread(void *dummy) CMM_SHOW(loaned_kb, "%lu\n", PAGES2KB(loaned_pages)); CMM_SHOW(loaned_target_kb, "%lu\n", PAGES2KB(loaned_pages_target)); -static ssize_t show_oom_pages(struct sys_device *dev, char *buf) +static ssize_t show_oom_pages(struct sys_device *dev, + struct sysdev_attribute *attr, char *buf) { return sprintf(buf, "%lu\n", PAGES2KB(oom_freed_pages)); } static ssize_t store_oom_pages(struct sys_device *dev, + struct sysdev_attribute *attr, const char *buf, size_t count) { unsigned long val = simple_strtoul (buf, NULL, 10); -- cgit v1.2.3 From 0764bf63da5466474eebf7d21994cf6b106265a3 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Mon, 28 Jul 2008 02:22:14 +1000 Subject: powerpc/vio: More fallout from dma_mapping_error API change arch/powerpc/kernel/vio.c:533: error: too few arguments to function 'dma_mapping_error' Signed-off-by: Stephen Rothwell Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/vio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c index 6952384cf89..22a3c33fd75 100644 --- a/arch/powerpc/kernel/vio.c +++ b/arch/powerpc/kernel/vio.c @@ -530,7 +530,7 @@ static dma_addr_t vio_dma_iommu_map_single(struct device *dev, void *vaddr, } ret = dma_iommu_ops.map_single(dev, vaddr, size, direction, attrs); - if (unlikely(dma_mapping_error(ret))) { + if (unlikely(dma_mapping_error(dev, ret))) { vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE)); atomic_inc(&viodev->cmo.allocs_failed); } -- cgit v1.2.3 From 440a0857e32a05979fb01fc59ea454a723e80e4b Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Sun, 27 Jul 2008 15:24:53 +1000 Subject: powerpc: Make core sibling information available to userspace Implement the notion of "core siblings" for powerpc. This makes /sys/devices/system/cpu/cpu*/topology/core_siblings present sensible values, indicating online CPUs which share an L2 cache. BenH: Made cpu_to_l2cache() use of_find_node_by_phandle() instead of IBM-specific open coded search Signed-off-by: Nathan Lynch Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/smp.c | 64 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 64 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 3c4d07e5e06..f7a2f81b5b7 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -63,10 +63,12 @@ struct thread_info *secondary_ti; cpumask_t cpu_possible_map = CPU_MASK_NONE; cpumask_t cpu_online_map = CPU_MASK_NONE; DEFINE_PER_CPU(cpumask_t, cpu_sibling_map) = CPU_MASK_NONE; +DEFINE_PER_CPU(cpumask_t, cpu_core_map) = CPU_MASK_NONE; EXPORT_SYMBOL(cpu_online_map); EXPORT_SYMBOL(cpu_possible_map); EXPORT_PER_CPU_SYMBOL(cpu_sibling_map); +EXPORT_PER_CPU_SYMBOL(cpu_core_map); /* SMP operations for this machine */ struct smp_ops_t *smp_ops; @@ -230,6 +232,7 @@ void __devinit smp_prepare_boot_cpu(void) cpu_set(boot_cpuid, cpu_online_map); cpu_set(boot_cpuid, per_cpu(cpu_sibling_map, boot_cpuid)); + cpu_set(boot_cpuid, per_cpu(cpu_core_map, boot_cpuid)); #ifdef CONFIG_PPC64 paca[boot_cpuid].__current = current; #endif @@ -377,11 +380,36 @@ int __cpuinit __cpu_up(unsigned int cpu) return 0; } +/* Must be called when no change can occur to cpu_present_map, + * i.e. during cpu online or offline. + */ +static struct device_node *cpu_to_l2cache(int cpu) +{ + struct device_node *np; + const phandle *php; + phandle ph; + + if (!cpu_present(cpu)) + return NULL; + + np = of_get_cpu_node(cpu, NULL); + if (np == NULL) + return NULL; + + php = of_get_property(np, "l2-cache", NULL); + if (php == NULL) + return NULL; + ph = *php; + of_node_put(np); + + return of_find_node_by_phandle(ph); +} /* Activate a secondary processor. */ int __devinit start_secondary(void *unused) { unsigned int cpu = smp_processor_id(); + struct device_node *l2_cache; int i, base; atomic_inc(&init_mm.mm_count); @@ -410,7 +438,26 @@ int __devinit start_secondary(void *unused) continue; cpu_set(cpu, per_cpu(cpu_sibling_map, base + i)); cpu_set(base + i, per_cpu(cpu_sibling_map, cpu)); + + /* cpu_core_map should be a superset of + * cpu_sibling_map even if we don't have cache + * information, so update the former here, too. + */ + cpu_set(cpu, per_cpu(cpu_core_map, base +i)); + cpu_set(base + i, per_cpu(cpu_core_map, cpu)); } + l2_cache = cpu_to_l2cache(cpu); + for_each_online_cpu(i) { + struct device_node *np = cpu_to_l2cache(i); + if (!np) + continue; + if (np == l2_cache) { + cpu_set(cpu, per_cpu(cpu_core_map, i)); + cpu_set(i, per_cpu(cpu_core_map, cpu)); + } + of_node_put(np); + } + of_node_put(l2_cache); ipi_call_unlock(); local_irq_enable(); @@ -448,6 +495,7 @@ void __init smp_cpus_done(unsigned int max_cpus) #ifdef CONFIG_HOTPLUG_CPU int __cpu_disable(void) { + struct device_node *l2_cache; int cpu = smp_processor_id(); int base, i; int err; @@ -464,7 +512,23 @@ int __cpu_disable(void) for (i = 0; i < threads_per_core; i++) { cpu_clear(cpu, per_cpu(cpu_sibling_map, base + i)); cpu_clear(base + i, per_cpu(cpu_sibling_map, cpu)); + cpu_clear(cpu, per_cpu(cpu_core_map, base +i)); + cpu_clear(base + i, per_cpu(cpu_core_map, cpu)); + } + + l2_cache = cpu_to_l2cache(cpu); + for_each_present_cpu(i) { + struct device_node *np = cpu_to_l2cache(i); + if (!np) + continue; + if (np == l2_cache) { + cpu_clear(cpu, per_cpu(cpu_core_map, i)); + cpu_clear(i, per_cpu(cpu_core_map, cpu)); + } + of_node_put(np); } + of_node_put(l2_cache); + return 0; } -- cgit v1.2.3 From e9efed3b80a83e44b98fc626f3268ae072550b84 Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Sun, 27 Jul 2008 15:24:54 +1000 Subject: powerpc: Make core id information available to userspace Existing Open Firmware practice is to report each processor core as a separate node in the device tree. Report the value of the "reg" OF property corresponding to a logical CPU's device node as the core_id attribute in /sys/devices/system/cpu/cpu*/topology/core_id. Signed-off-by: Nathan Lynch Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/smp.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index f7a2f81b5b7..5337ca7bb64 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -380,6 +380,29 @@ int __cpuinit __cpu_up(unsigned int cpu) return 0; } +/* Return the value of the reg property corresponding to the given + * logical cpu. + */ +int cpu_to_core_id(int cpu) +{ + struct device_node *np; + const int *reg; + int id = -1; + + np = of_get_cpu_node(cpu, NULL); + if (!np) + goto out; + + reg = of_get_property(np, "reg", NULL); + if (!reg) + goto out; + + id = *reg; +out: + of_node_put(np); + return id; +} + /* Must be called when no change can occur to cpu_present_map, * i.e. during cpu online or offline. */ -- cgit v1.2.3 From 124c27d375f72dd857eac27f2932f9f01df76bf4 Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Sun, 27 Jul 2008 15:24:55 +1000 Subject: powerpc: Show processor cache information in sysfs Collect cache information from the OF device tree and display it in the cpu hierarchy in sysfs. This is intended to be compatible at the userspace level with x86's implementation[1], hence some of the funny attribute names. The arrangement of cache info is not immediately intuitive, but (again) it's for compatibility's sake. The cache attributes exposed are: type (Data, Instruction, or Unified) level (1, 2, 3...) size coherency_line_size number_of_sets ways_of_associativity All of these can be derived on platforms that follow the OF PowerPC Processor binding. The code "publishes" only those attributes for which it is able to determine values; attributes for values which cannot be determined are not created at all. [1] arch/x86/kernel/cpu/intel_cacheinfo.c BenH: Turned some printk's into pr_debug, added better NULL checking in a couple of places. Signed-off-by: Nathan Lynch Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/sysfs.c | 309 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 309 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index 156808086ca..56d172d16e5 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -22,6 +22,8 @@ static DEFINE_PER_CPU(struct cpu, cpu_devices); +static DEFINE_PER_CPU(struct kobject *, cache_toplevel); + /* SMT stuff */ #ifdef CONFIG_PPC_MULTIPLATFORM @@ -297,6 +299,287 @@ static struct sysdev_attribute pa6t_attrs[] = { #endif /* CONFIG_DEBUG_KERNEL */ }; +struct cache_desc { + struct kobject kobj; + struct cache_desc *next; + const char *type; /* Instruction, Data, or Unified */ + u32 size; /* total cache size in KB */ + u32 line_size; /* in bytes */ + u32 nr_sets; /* number of sets */ + u32 level; /* e.g. 1, 2, 3... */ + u32 associativity; /* e.g. 8-way... 0 is fully associative */ +}; + +DEFINE_PER_CPU(struct cache_desc *, cache_desc); + +static struct cache_desc *kobj_to_cache_desc(struct kobject *k) +{ + return container_of(k, struct cache_desc, kobj); +} + +static void cache_desc_release(struct kobject *k) +{ + struct cache_desc *desc = kobj_to_cache_desc(k); + + pr_debug("%s: releasing %s\n", __func__, kobject_name(k)); + + if (desc->next) + kobject_put(&desc->next->kobj); + + kfree(kobj_to_cache_desc(k)); +} + +static ssize_t cache_desc_show(struct kobject *k, struct attribute *attr, char *buf) +{ + struct kobj_attribute *kobj_attr; + + kobj_attr = container_of(attr, struct kobj_attribute, attr); + + return kobj_attr->show(k, kobj_attr, buf); +} + +static struct sysfs_ops cache_desc_sysfs_ops = { + .show = cache_desc_show, +}; + +static struct kobj_type cache_desc_type = { + .release = cache_desc_release, + .sysfs_ops = &cache_desc_sysfs_ops, +}; + +static ssize_t cache_size_show(struct kobject *k, struct kobj_attribute *attr, char *buf) +{ + struct cache_desc *cache = kobj_to_cache_desc(k); + + return sprintf(buf, "%uK\n", cache->size); +} + +static struct kobj_attribute cache_size_attr = + __ATTR(size, 0444, cache_size_show, NULL); + +static ssize_t cache_line_size_show(struct kobject *k, struct kobj_attribute *attr, char *buf) +{ + struct cache_desc *cache = kobj_to_cache_desc(k); + + return sprintf(buf, "%u\n", cache->line_size); +} + +static struct kobj_attribute cache_line_size_attr = + __ATTR(coherency_line_size, 0444, cache_line_size_show, NULL); + +static ssize_t cache_nr_sets_show(struct kobject *k, struct kobj_attribute *attr, char *buf) +{ + struct cache_desc *cache = kobj_to_cache_desc(k); + + return sprintf(buf, "%u\n", cache->nr_sets); +} + +static struct kobj_attribute cache_nr_sets_attr = + __ATTR(number_of_sets, 0444, cache_nr_sets_show, NULL); + +static ssize_t cache_type_show(struct kobject *k, struct kobj_attribute *attr, char *buf) +{ + struct cache_desc *cache = kobj_to_cache_desc(k); + + return sprintf(buf, "%s\n", cache->type); +} + +static struct kobj_attribute cache_type_attr = + __ATTR(type, 0444, cache_type_show, NULL); + +static ssize_t cache_level_show(struct kobject *k, struct kobj_attribute *attr, char *buf) +{ + struct cache_desc *cache = kobj_to_cache_desc(k); + + return sprintf(buf, "%u\n", cache->level); +} + +static struct kobj_attribute cache_level_attr = + __ATTR(level, 0444, cache_level_show, NULL); + +static ssize_t cache_assoc_show(struct kobject *k, struct kobj_attribute *attr, char *buf) +{ + struct cache_desc *cache = kobj_to_cache_desc(k); + + return sprintf(buf, "%u\n", cache->associativity); +} + +static struct kobj_attribute cache_assoc_attr = + __ATTR(ways_of_associativity, 0444, cache_assoc_show, NULL); + +struct cache_desc_info { + const char *type; + const char *size_prop; + const char *line_size_prop; + const char *nr_sets_prop; +}; + +/* PowerPC Processor binding says the [di]-cache-* must be equal on + * unified caches, so just use d-cache properties. */ +static struct cache_desc_info ucache_info = { + .type = "Unified", + .size_prop = "d-cache-size", + .line_size_prop = "d-cache-line-size", + .nr_sets_prop = "d-cache-sets", +}; + +static struct cache_desc_info dcache_info = { + .type = "Data", + .size_prop = "d-cache-size", + .line_size_prop = "d-cache-line-size", + .nr_sets_prop = "d-cache-sets", +}; + +static struct cache_desc_info icache_info = { + .type = "Instruction", + .size_prop = "i-cache-size", + .line_size_prop = "i-cache-line-size", + .nr_sets_prop = "i-cache-sets", +}; + +static struct cache_desc * __cpuinit create_cache_desc(struct device_node *np, struct kobject *parent, int index, int level, struct cache_desc_info *info) +{ + const u32 *cache_line_size; + struct cache_desc *new; + const u32 *cache_size; + const u32 *nr_sets; + int rc; + + new = kzalloc(sizeof(*new), GFP_KERNEL); + if (!new) + return NULL; + + rc = kobject_init_and_add(&new->kobj, &cache_desc_type, parent, + "index%d", index); + if (rc) + goto err; + + /* type */ + new->type = info->type; + rc = sysfs_create_file(&new->kobj, &cache_type_attr.attr); + WARN_ON(rc); + + /* level */ + new->level = level; + rc = sysfs_create_file(&new->kobj, &cache_level_attr.attr); + WARN_ON(rc); + + /* size */ + cache_size = of_get_property(np, info->size_prop, NULL); + if (cache_size) { + new->size = *cache_size / 1024; + rc = sysfs_create_file(&new->kobj, + &cache_size_attr.attr); + WARN_ON(rc); + } + + /* coherency_line_size */ + cache_line_size = of_get_property(np, info->line_size_prop, NULL); + if (cache_line_size) { + new->line_size = *cache_line_size; + rc = sysfs_create_file(&new->kobj, + &cache_line_size_attr.attr); + WARN_ON(rc); + } + + /* number_of_sets */ + nr_sets = of_get_property(np, info->nr_sets_prop, NULL); + if (nr_sets) { + new->nr_sets = *nr_sets; + rc = sysfs_create_file(&new->kobj, + &cache_nr_sets_attr.attr); + WARN_ON(rc); + } + + /* ways_of_associativity */ + if (new->nr_sets == 1) { + /* fully associative */ + new->associativity = 0; + goto create_assoc; + } + + if (new->nr_sets && new->size && new->line_size) { + /* If we have values for all of these we can derive + * the associativity. */ + new->associativity = + ((new->size * 1024) / new->nr_sets) / new->line_size; +create_assoc: + rc = sysfs_create_file(&new->kobj, + &cache_assoc_attr.attr); + WARN_ON(rc); + } + + return new; +err: + kfree(new); + return NULL; +} + +static bool cache_is_unified(struct device_node *np) +{ + return of_get_property(np, "cache-unified", NULL); +} + +static struct cache_desc * __cpuinit create_cache_index_info(struct device_node *np, struct kobject *parent, int index, int level) +{ + const phandle *next_cache_phandle; + struct device_node *next_cache; + struct cache_desc *new, **end; + + pr_debug("%s(node = %s, index = %d)\n", __func__, np->full_name, index); + + if (cache_is_unified(np)) { + new = create_cache_desc(np, parent, index, level, + &ucache_info); + } else { + new = create_cache_desc(np, parent, index, level, + &dcache_info); + if (new) { + index++; + new->next = create_cache_desc(np, parent, index, level, + &icache_info); + } + } + if (!new) + return NULL; + + end = &new->next; + while (*end) + end = &(*end)->next; + + next_cache_phandle = of_get_property(np, "l2-cache", NULL); + if (!next_cache_phandle) + goto out; + + next_cache = of_find_node_by_phandle(*next_cache_phandle); + if (!next_cache) + goto out; + + *end = create_cache_index_info(next_cache, parent, ++index, ++level); + + of_node_put(next_cache); +out: + return new; +} + +static void __cpuinit create_cache_info(struct sys_device *sysdev) +{ + struct kobject *cache_toplevel; + struct device_node *np = NULL; + int cpu = sysdev->id; + + cache_toplevel = kobject_create_and_add("cache", &sysdev->kobj); + if (!cache_toplevel) + return; + per_cpu(cache_toplevel, cpu) = cache_toplevel; + np = of_get_cpu_node(cpu, NULL); + if (np != NULL) { + per_cpu(cache_desc, cpu) = + create_cache_index_info(np, cache_toplevel, 0, 1); + of_node_put(np); + } + return; +} static void __cpuinit register_cpu_online(unsigned int cpu) { @@ -346,9 +629,33 @@ static void __cpuinit register_cpu_online(unsigned int cpu) if (cpu_has_feature(CPU_FTR_DSCR)) sysdev_create_file(s, &attr_dscr); + + create_cache_info(s); } #ifdef CONFIG_HOTPLUG_CPU +static void remove_cache_info(struct sys_device *sysdev) +{ + struct kobject *cache_toplevel; + struct cache_desc *cache_desc; + int cpu = sysdev->id; + + cache_desc = per_cpu(cache_desc, cpu); + if (cache_desc != NULL) { + sysfs_remove_file(&cache_desc->kobj, &cache_size_attr.attr); + sysfs_remove_file(&cache_desc->kobj, &cache_line_size_attr.attr); + sysfs_remove_file(&cache_desc->kobj, &cache_type_attr.attr); + sysfs_remove_file(&cache_desc->kobj, &cache_level_attr.attr); + sysfs_remove_file(&cache_desc->kobj, &cache_nr_sets_attr.attr); + sysfs_remove_file(&cache_desc->kobj, &cache_assoc_attr.attr); + + kobject_put(&cache_desc->kobj); + } + cache_toplevel = per_cpu(cache_toplevel, cpu); + if (cache_toplevel != NULL) + kobject_put(cache_toplevel); +} + static void unregister_cpu_online(unsigned int cpu) { struct cpu *c = &per_cpu(cpu_devices, cpu); @@ -399,6 +706,8 @@ static void unregister_cpu_online(unsigned int cpu) if (cpu_has_feature(CPU_FTR_DSCR)) sysdev_remove_file(s, &attr_dscr); + + remove_cache_info(s); } #endif /* CONFIG_HOTPLUG_CPU */ -- cgit v1.2.3 From f023bf0f91f1f1b926ec8f5cf0ee24be134bf024 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 28 Jul 2008 12:06:19 +1000 Subject: powerpc/powermac: Use sane default baudrate for SCC debugging When using the "sccdbg" option to route early kernel messages and xmon to the SCC serial port on PowerMacs, when this wasn't the configured output port of Open Firmware, we initialize the baudrate to 57600bps. This isn't a very good default on some powermacs where both the FW and pmac_zilog will default to 38400. This fixes it to use the same logic as pmac_zilog to pick a default speed. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/powermac/udbg_scc.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/powermac/udbg_scc.c b/arch/powerpc/platforms/powermac/udbg_scc.c index 47de4d3fc16..572771fd846 100644 --- a/arch/powerpc/platforms/powermac/udbg_scc.c +++ b/arch/powerpc/platforms/powermac/udbg_scc.c @@ -125,13 +125,23 @@ void udbg_scc_init(int force_scc) out_8(sccc, 0xc0); /* If SCC was the OF output port, read the BRG value, else - * Setup for 57600 8N1 + * Setup for 38400 or 57600 8N1 depending on the machine */ if (ch_def != NULL) { out_8(sccc, 13); scc_inittab[1] = in_8(sccc); out_8(sccc, 12); scc_inittab[3] = in_8(sccc); + } else if (machine_is_compatible("RackMac1,1") + || machine_is_compatible("RackMac1,2") + || machine_is_compatible("MacRISC4")) { + /* Xserves and G5s default to 57600 */ + scc_inittab[1] = 0; + scc_inittab[3] = 0; + } else { + /* Others default to 38400 */ + scc_inittab[1] = 0; + scc_inittab[3] = 1; } for (i = 0; i < sizeof(scc_inittab); ++i) -- cgit v1.2.3 From 025d7917a5ede982a5669c6735ef73a227b9827e Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 28 Jul 2008 13:49:15 +1000 Subject: powerpc/powermac: Fixup default serial port device for pmac_zilog This removes the non-working code in legacy_serial that tried to handle the powermac SCC ports, and instead add a (now working) function to the powermac platform code to find the default serial console if any. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/legacy_serial.c | 44 ++++++++------------ arch/powerpc/platforms/powermac/setup.c | 72 +++++++++++++++++++++++++++++++++ 2 files changed, 89 insertions(+), 27 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index 4d96e1db55e..9ddfaef1a18 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -493,18 +493,18 @@ static int __init serial_dev_init(void) device_initcall(serial_dev_init); +#ifdef CONFIG_SERIAL_8250_CONSOLE /* * This is called very early, as part of console_init() (typically just after * time_init()). This function is respondible for trying to find a good * default console on serial ports. It tries to match the open firmware - * default output with one of the available serial console drivers, either - * one of the platform serial ports that have been probed earlier by - * find_legacy_serial_ports() or some more platform specific ones. + * default output with one of the available serial console drivers that have + * been probed earlier by find_legacy_serial_ports() */ static int __init check_legacy_serial_console(void) { struct device_node *prom_stdout = NULL; - int speed = 0, offset = 0; + int i, speed = 0, offset = 0; const char *name; const u32 *spd; @@ -548,31 +548,20 @@ static int __init check_legacy_serial_console(void) if (spd) speed = *spd; - if (0) - ; -#ifdef CONFIG_SERIAL_8250_CONSOLE - else if (strcmp(name, "serial") == 0) { - int i; - /* Look for it in probed array */ - for (i = 0; i < legacy_serial_count; i++) { - if (prom_stdout != legacy_serial_infos[i].np) - continue; - offset = i; - speed = legacy_serial_infos[i].speed; - break; - } - if (i >= legacy_serial_count) - goto not_found; + if (strcmp(name, "serial") != 0) + goto not_found; + + /* Look for it in probed array */ + for (i = 0; i < legacy_serial_count; i++) { + if (prom_stdout != legacy_serial_infos[i].np) + continue; + offset = i; + speed = legacy_serial_infos[i].speed; + break; } -#endif /* CONFIG_SERIAL_8250_CONSOLE */ -#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE - else if (strcmp(name, "ch-a") == 0) - offset = 0; - else if (strcmp(name, "ch-b") == 0) - offset = 1; -#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */ - else + if (i >= legacy_serial_count) goto not_found; + of_node_put(prom_stdout); DBG("Found serial console at ttyS%d\n", offset); @@ -591,3 +580,4 @@ static int __init check_legacy_serial_console(void) } console_initcall(check_legacy_serial_console); +#endif /* CONFIG_SERIAL_8250_CONSOLE */ diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 31635446901..88ccf3a08a9 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -541,6 +541,78 @@ static int __init pmac_declare_of_platform_devices(void) } machine_device_initcall(powermac, pmac_declare_of_platform_devices); +#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE +/* + * This is called very early, as part of console_init() (typically just after + * time_init()). This function is respondible for trying to find a good + * default console on serial ports. It tries to match the open firmware + * default output with one of the available serial console drivers. + */ +static int __init check_pmac_serial_console(void) +{ + struct device_node *prom_stdout = NULL; + int offset = 0; + const char *name; +#ifdef CONFIG_SERIAL_PMACZILOG_TTYS + char *devname = "ttyS"; +#else + char *devname = "ttyPZ"; +#endif + + pr_debug(" -> check_pmac_serial_console()\n"); + + /* The user has requested a console so this is already set up. */ + if (strstr(boot_command_line, "console=")) { + pr_debug(" console was specified !\n"); + return -EBUSY; + } + + if (!of_chosen) { + pr_debug(" of_chosen is NULL !\n"); + return -ENODEV; + } + + /* We are getting a weird phandle from OF ... */ + /* ... So use the full path instead */ + name = of_get_property(of_chosen, "linux,stdout-path", NULL); + if (name == NULL) { + pr_debug(" no linux,stdout-path !\n"); + return -ENODEV; + } + prom_stdout = of_find_node_by_path(name); + if (!prom_stdout) { + pr_debug(" can't find stdout package %s !\n", name); + return -ENODEV; + } + pr_debug("stdout is %s\n", prom_stdout->full_name); + + name = of_get_property(prom_stdout, "name", NULL); + if (!name) { + pr_debug(" stdout package has no name !\n"); + goto not_found; + } + + if (strcmp(name, "ch-a") == 0) + offset = 0; + else if (strcmp(name, "ch-b") == 0) + offset = 1; + else + goto not_found; + of_node_put(prom_stdout); + + pr_debug("Found serial console at %s%d\n", devname, offset); + + return add_preferred_console(devname, offset, NULL); + + not_found: + pr_debug("No preferred console found !\n"); + of_node_put(prom_stdout); + return -ENODEV; +} +console_initcall(check_pmac_serial_console); + +#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */ + /* * Called very early, MMU is off, device-tree isn't unflattened */ -- cgit v1.2.3 From 00df438e89a9003895948170e1abf64dd4665872 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 28 Jul 2008 16:13:18 +1000 Subject: powerpc: Disable 64K hugetlb support when doing 64K SPU mappings The 64K SPU local store mapping feature is incompatible with the 64K huge pages support due to the inability of some parts of the memory management to differenciate between them while they use a different page table format. For now, disable 64K huge pages when CONFIG_SPU_FS_64K_LS, in the long run, this can be fixed by making this feature use the hugetlb page table format. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/hugetlbpage.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index ed0aab0208a..f1c2d55b437 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -736,14 +736,21 @@ static int __init hugetlbpage_init(void) if (!cpu_has_feature(CPU_FTR_16M_PAGE)) return -ENODEV; + /* Add supported huge page sizes. Need to change HUGE_MAX_HSTATE * and adjust PTE_NONCACHE_NUM if the number of supported huge page * sizes changes. */ set_huge_psize(MMU_PAGE_16M); - set_huge_psize(MMU_PAGE_64K); set_huge_psize(MMU_PAGE_16G); + /* Temporarily disable support for 64K huge pages when 64K SPU local + * store support is enabled as the current implementation conflicts. + */ +#ifndef CONFIG_SPU_FS_64K_LS + set_huge_psize(MMU_PAGE_64K); +#endif + for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) { if (mmu_huge_psizes[psize]) { huge_pgtable_cache(psize) = kmem_cache_create( -- cgit v1.2.3 From e193325e3e3de188ae2aa5207adc7129aacc5c9d Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Mon, 28 Jul 2008 10:43:22 +0200 Subject: cpm2: Implement GPIO LIB API on CPM2 Freescale SoC. This patch implement GPIO LIB support for the CPM2 GPIOs. The code can also be used for CPM1 GPIO port E, as both cores are compatible at the register level. Based on earlier work by Laurent Pinchart. Signed-off-by: Jochen Friedrich Cc: Laurent Pinchart Signed-off-by: Kumar Gala --- arch/powerpc/platforms/Kconfig | 2 + arch/powerpc/sysdev/cpm2.c | 11 ++++ arch/powerpc/sysdev/cpm_common.c | 123 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 136 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 1d0968775c0..18a71839dc9 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -254,6 +254,8 @@ config CPM2 select CPM select PPC_LIB_RHEAP select PPC_PCI_CHOICE + select ARCH_REQUIRE_GPIOLIB + select GENERIC_GPIO help The CPM2 (Communications Processor Module) is a coprocessor on embedded CPUs made by Freescale. Selecting this option means that diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c index 5a6c5dfc53e..9311778a508 100644 --- a/arch/powerpc/sysdev/cpm2.c +++ b/arch/powerpc/sysdev/cpm2.c @@ -377,3 +377,14 @@ void cpm2_set_pin(int port, int pin, int flags) else clrbits32(&iop[port].odr, pin); } + +static int cpm_init_par_io(void) +{ + struct device_node *np; + + for_each_compatible_node(np, NULL, "fsl,cpm2-pario-bank") + cpm2_gpiochip_add32(np); + return 0; +} +arch_initcall(cpm_init_par_io); + diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c index e4b7296acb2..53da8a079f9 100644 --- a/arch/powerpc/sysdev/cpm_common.c +++ b/arch/powerpc/sysdev/cpm_common.c @@ -19,6 +19,8 @@ #include #include +#include +#include #include #include @@ -28,6 +30,10 @@ #include +#if defined(CONFIG_CPM2) || defined(CONFIG_8xx_GPIO) +#include +#endif + #ifdef CONFIG_PPC_EARLY_DEBUG_CPM static u32 __iomem *cpm_udbg_txdesc = (u32 __iomem __force *)CONFIG_PPC_EARLY_DEBUG_CPM_ADDR; @@ -207,3 +213,120 @@ dma_addr_t cpm_muram_dma(void __iomem *addr) return muram_pbase + ((u8 __iomem *)addr - muram_vbase); } EXPORT_SYMBOL(cpm_muram_dma); + +#if defined(CONFIG_CPM2) || defined(CONFIG_8xx_GPIO) + +struct cpm2_ioports { + u32 dir, par, sor, odr, dat; + u32 res[3]; +}; + +struct cpm2_gpio32_chip { + struct of_mm_gpio_chip mm_gc; + spinlock_t lock; + + /* shadowed data register to clear/set bits safely */ + u32 cpdata; +}; + +static inline struct cpm2_gpio32_chip * +to_cpm2_gpio32_chip(struct of_mm_gpio_chip *mm_gc) +{ + return container_of(mm_gc, struct cpm2_gpio32_chip, mm_gc); +} + +static void cpm2_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc) +{ + struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc); + struct cpm2_ioports __iomem *iop = mm_gc->regs; + + cpm2_gc->cpdata = in_be32(&iop->dat); +} + +static int cpm2_gpio32_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm2_ioports __iomem *iop = mm_gc->regs; + u32 pin_mask; + + pin_mask = 1 << (31 - gpio); + + return !!(in_be32(&iop->dat) & pin_mask); +} + +static void cpm2_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc); + struct cpm2_ioports __iomem *iop = mm_gc->regs; + unsigned long flags; + u32 pin_mask = 1 << (31 - gpio); + + spin_lock_irqsave(&cpm2_gc->lock, flags); + + if (value) + cpm2_gc->cpdata |= pin_mask; + else + cpm2_gc->cpdata &= ~pin_mask; + + out_be32(&iop->dat, cpm2_gc->cpdata); + + spin_unlock_irqrestore(&cpm2_gc->lock, flags); +} + +static int cpm2_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm2_ioports __iomem *iop = mm_gc->regs; + u32 pin_mask; + + pin_mask = 1 << (31 - gpio); + + setbits32(&iop->dir, pin_mask); + + cpm2_gpio32_set(gc, gpio, val); + + return 0; +} + +static int cpm2_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm2_ioports __iomem *iop = mm_gc->regs; + u32 pin_mask; + + pin_mask = 1 << (31 - gpio); + + clrbits32(&iop->dir, pin_mask); + + return 0; +} + +int cpm2_gpiochip_add32(struct device_node *np) +{ + struct cpm2_gpio32_chip *cpm2_gc; + struct of_mm_gpio_chip *mm_gc; + struct of_gpio_chip *of_gc; + struct gpio_chip *gc; + + cpm2_gc = kzalloc(sizeof(*cpm2_gc), GFP_KERNEL); + if (!cpm2_gc) + return -ENOMEM; + + spin_lock_init(&cpm2_gc->lock); + + mm_gc = &cpm2_gc->mm_gc; + of_gc = &mm_gc->of_gc; + gc = &of_gc->gc; + + mm_gc->save_regs = cpm2_gpio32_save_regs; + of_gc->gpio_cells = 2; + gc->ngpio = 32; + gc->direction_input = cpm2_gpio32_dir_in; + gc->direction_output = cpm2_gpio32_dir_out; + gc->get = cpm2_gpio32_get; + gc->set = cpm2_gpio32_set; + + return of_mm_gpiochip_add(np, mm_gc); +} +#endif /* CONFIG_CPM2 || CONFIG_8xx_GPIO */ -- cgit v1.2.3 From dc2380ec8572fcd7f7e9579afc9fb223300d922f Mon Sep 17 00:00:00 2001 From: Jochen Friedrich Date: Thu, 3 Jul 2008 02:18:23 +1000 Subject: powerpc: implement GPIO LIB API on CPM1 Freescale SoC. This patch implement GPIO LIB support for the CPM1 GPIOs. Signed-off-by: Jochen Friedrich Signed-off-by: Kumar Gala --- arch/powerpc/platforms/8xx/Kconfig | 10 ++ arch/powerpc/sysdev/cpm1.c | 267 ++++++++++++++++++++++++++++++++++++- 2 files changed, 272 insertions(+), 5 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig index 6fc849e51e4..71d7562e190 100644 --- a/arch/powerpc/platforms/8xx/Kconfig +++ b/arch/powerpc/platforms/8xx/Kconfig @@ -105,6 +105,16 @@ config 8xx_COPYBACK If in doubt, say Y here. +config 8xx_GPIO + bool "GPIO API Support" + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + help + Saying Y here will cause the ports on an MPC8xx processor to be used + with the GPIO API. If you say N here, the kernel needs less memory. + + If in doubt, say Y here. + config 8xx_CPU6 bool "CPU6 Silicon Errata (860 Pre Rev. C)" help diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c index 661df42830b..4a04823e842 100644 --- a/arch/powerpc/sysdev/cpm1.c +++ b/arch/powerpc/sysdev/cpm1.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include @@ -42,6 +43,10 @@ #include +#ifdef CONFIG_8xx_GPIO +#include +#endif + #define CPM_MAP_SIZE (0x4000) cpm8xx_t __iomem *cpmp; /* Pointer to comm processor space */ @@ -290,20 +295,24 @@ struct cpm_ioport16 { __be16 res[3]; }; -struct cpm_ioport32 { - __be32 dir, par, sor; +struct cpm_ioport32b { + __be32 dir, par, odr, dat; +}; + +struct cpm_ioport32e { + __be32 dir, par, sor, odr, dat; }; static void cpm1_set_pin32(int port, int pin, int flags) { - struct cpm_ioport32 __iomem *iop; + struct cpm_ioport32e __iomem *iop; pin = 1 << (31 - pin); if (port == CPM_PORTB) - iop = (struct cpm_ioport32 __iomem *) + iop = (struct cpm_ioport32e __iomem *) &mpc8xx_immr->im_cpm.cp_pbdir; else - iop = (struct cpm_ioport32 __iomem *) + iop = (struct cpm_ioport32e __iomem *) &mpc8xx_immr->im_cpm.cp_pedir; if (flags & CPM_PIN_OUTPUT) @@ -498,3 +507,251 @@ int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode) return 0; } + +/* + * GPIO LIB API implementation + */ +#ifdef CONFIG_8xx_GPIO + +struct cpm1_gpio16_chip { + struct of_mm_gpio_chip mm_gc; + spinlock_t lock; + + /* shadowed data register to clear/set bits safely */ + u16 cpdata; +}; + +static inline struct cpm1_gpio16_chip * +to_cpm1_gpio16_chip(struct of_mm_gpio_chip *mm_gc) +{ + return container_of(mm_gc, struct cpm1_gpio16_chip, mm_gc); +} + +static void cpm1_gpio16_save_regs(struct of_mm_gpio_chip *mm_gc) +{ + struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc); + struct cpm_ioport16 __iomem *iop = mm_gc->regs; + + cpm1_gc->cpdata = in_be16(&iop->dat); +} + +static int cpm1_gpio16_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm_ioport16 __iomem *iop = mm_gc->regs; + u16 pin_mask; + + pin_mask = 1 << (15 - gpio); + + return !!(in_be16(&iop->dat) & pin_mask); +} + +static void cpm1_gpio16_set(struct gpio_chip *gc, unsigned int gpio, int value) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc); + struct cpm_ioport16 __iomem *iop = mm_gc->regs; + unsigned long flags; + u16 pin_mask = 1 << (15 - gpio); + + spin_lock_irqsave(&cpm1_gc->lock, flags); + + if (value) + cpm1_gc->cpdata |= pin_mask; + else + cpm1_gc->cpdata &= ~pin_mask; + + out_be16(&iop->dat, cpm1_gc->cpdata); + + spin_unlock_irqrestore(&cpm1_gc->lock, flags); +} + +static int cpm1_gpio16_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm_ioport16 __iomem *iop = mm_gc->regs; + u16 pin_mask; + + pin_mask = 1 << (15 - gpio); + + setbits16(&iop->dir, pin_mask); + + cpm1_gpio16_set(gc, gpio, val); + + return 0; +} + +static int cpm1_gpio16_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm_ioport16 __iomem *iop = mm_gc->regs; + u16 pin_mask; + + pin_mask = 1 << (15 - gpio); + + clrbits16(&iop->dir, pin_mask); + + return 0; +} + +int cpm1_gpiochip_add16(struct device_node *np) +{ + struct cpm1_gpio16_chip *cpm1_gc; + struct of_mm_gpio_chip *mm_gc; + struct of_gpio_chip *of_gc; + struct gpio_chip *gc; + + cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL); + if (!cpm1_gc) + return -ENOMEM; + + spin_lock_init(&cpm1_gc->lock); + + mm_gc = &cpm1_gc->mm_gc; + of_gc = &mm_gc->of_gc; + gc = &of_gc->gc; + + mm_gc->save_regs = cpm1_gpio16_save_regs; + of_gc->gpio_cells = 2; + gc->ngpio = 16; + gc->direction_input = cpm1_gpio16_dir_in; + gc->direction_output = cpm1_gpio16_dir_out; + gc->get = cpm1_gpio16_get; + gc->set = cpm1_gpio16_set; + + return of_mm_gpiochip_add(np, mm_gc); +} + +struct cpm1_gpio32_chip { + struct of_mm_gpio_chip mm_gc; + spinlock_t lock; + + /* shadowed data register to clear/set bits safely */ + u32 cpdata; +}; + +static inline struct cpm1_gpio32_chip * +to_cpm1_gpio32_chip(struct of_mm_gpio_chip *mm_gc) +{ + return container_of(mm_gc, struct cpm1_gpio32_chip, mm_gc); +} + +static void cpm1_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc) +{ + struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc); + struct cpm_ioport32b __iomem *iop = mm_gc->regs; + + cpm1_gc->cpdata = in_be32(&iop->dat); +} + +static int cpm1_gpio32_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm_ioport32b __iomem *iop = mm_gc->regs; + u32 pin_mask; + + pin_mask = 1 << (31 - gpio); + + return !!(in_be32(&iop->dat) & pin_mask); +} + +static void cpm1_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc); + struct cpm_ioport32b __iomem *iop = mm_gc->regs; + unsigned long flags; + u32 pin_mask = 1 << (31 - gpio); + + spin_lock_irqsave(&cpm1_gc->lock, flags); + + if (value) + cpm1_gc->cpdata |= pin_mask; + else + cpm1_gc->cpdata &= ~pin_mask; + + out_be32(&iop->dat, cpm1_gc->cpdata); + + spin_unlock_irqrestore(&cpm1_gc->lock, flags); +} + +static int cpm1_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm_ioport32b __iomem *iop = mm_gc->regs; + u32 pin_mask; + + pin_mask = 1 << (31 - gpio); + + setbits32(&iop->dir, pin_mask); + + cpm1_gpio32_set(gc, gpio, val); + + return 0; +} + +static int cpm1_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm_ioport32b __iomem *iop = mm_gc->regs; + u32 pin_mask; + + pin_mask = 1 << (31 - gpio); + + clrbits32(&iop->dir, pin_mask); + + return 0; +} + +int cpm1_gpiochip_add32(struct device_node *np) +{ + struct cpm1_gpio32_chip *cpm1_gc; + struct of_mm_gpio_chip *mm_gc; + struct of_gpio_chip *of_gc; + struct gpio_chip *gc; + + cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL); + if (!cpm1_gc) + return -ENOMEM; + + spin_lock_init(&cpm1_gc->lock); + + mm_gc = &cpm1_gc->mm_gc; + of_gc = &mm_gc->of_gc; + gc = &of_gc->gc; + + mm_gc->save_regs = cpm1_gpio32_save_regs; + of_gc->gpio_cells = 2; + gc->ngpio = 32; + gc->direction_input = cpm1_gpio32_dir_in; + gc->direction_output = cpm1_gpio32_dir_out; + gc->get = cpm1_gpio32_get; + gc->set = cpm1_gpio32_set; + + return of_mm_gpiochip_add(np, mm_gc); +} + +static int cpm_init_par_io(void) +{ + struct device_node *np; + + for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-a") + cpm1_gpiochip_add16(np); + + for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-b") + cpm1_gpiochip_add32(np); + + for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-c") + cpm1_gpiochip_add16(np); + + for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-d") + cpm1_gpiochip_add16(np); + + /* Port E uses CPM2 layout */ + for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-e") + cpm2_gpiochip_add32(np); + return 0; +} +arch_initcall(cpm_init_par_io); + +#endif /* CONFIG_8xx_GPIO */ -- cgit v1.2.3 From 80776554b6c93cf828ddc702010c6a189aa0d0e9 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Mon, 28 Jul 2008 10:42:16 +0200 Subject: cpm_uart: Add generic clock API support to set baudrates This patch introduces baudrate setting support via the generic clock API. When present the optional device tree clock property is used instead of fsl-cpm-brg. Platforms can then define complex clock schemes, to output the serial clock on an external pin for instance. Signed-off-by: Laurent Pinchart Signed-off-by: Kumar Gala --- arch/powerpc/platforms/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 18a71839dc9..4c900efa164 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -283,6 +283,7 @@ config FSL_ULI1575 config CPM bool + select PPC_CLOCK config OF_RTC bool -- cgit v1.2.3 From e517881e427757afc3cce6d76173b1d898b30ab3 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 12 Jun 2008 03:04:31 +0400 Subject: powerpc: rtc_cmos_setup: assign interrupts only if there is i8259 PIC i8259 PIC is disabled on MPC8610HPCD boards, thus currently rtc-cmos driver fails to probe. To fix the issue, we lookup the device tree for "chrp,iic" and "pnpPNP,000" compatible devices, and if not found we do not assign RTC IRQ and assuming that i8259 was disabled. Though this patch fixes RTC on some boards (and surely should not break any other), the whole approach is still broken. We can't easily fix this though, because old device trees do not specify i8259 interrupts for the cmos rtc node. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/rtc_cmos_setup.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/sysdev/rtc_cmos_setup.c b/arch/powerpc/sysdev/rtc_cmos_setup.c index c09ddc0dbeb..c1879ebfd4f 100644 --- a/arch/powerpc/sysdev/rtc_cmos_setup.c +++ b/arch/powerpc/sysdev/rtc_cmos_setup.c @@ -21,6 +21,7 @@ static int __init add_rtc(void) struct device_node *np; struct platform_device *pd; struct resource res[2]; + unsigned int num_res = 1; int ret; memset(&res, 0, sizeof(res)); @@ -41,14 +42,24 @@ static int __init add_rtc(void) if (res[0].start != RTC_PORT(0)) return -EINVAL; - /* Use a fixed interrupt value of 8 since on PPC if we are using this - * its off an i8259 which we ensure has interrupt numbers 0..15. */ - res[1].start = 8; - res[1].end = 8; - res[1].flags = IORESOURCE_IRQ; + np = of_find_compatible_node(NULL, NULL, "chrp,iic"); + if (!np) + np = of_find_compatible_node(NULL, NULL, "pnpPNP,000"); + if (np) { + of_node_put(np); + /* + * Use a fixed interrupt value of 8 since on PPC if we are + * using this its off an i8259 which we ensure has interrupt + * numbers 0..15. + */ + res[1].start = 8; + res[1].end = 8; + res[1].flags = IORESOURCE_IRQ; + num_res++; + } pd = platform_device_register_simple("rtc_cmos", -1, - &res[0], 2); + &res[0], num_res); if (IS_ERR(pd)) return PTR_ERR(pd); -- cgit v1.2.3 From dddb8d311157d054da5441385f681b8cc0e5a94b Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 22 Jul 2008 18:00:43 +0200 Subject: cpm2: Rework baud rate generators configuration to support external clocks. The CPM2 BRG setup functions cpm_setbrg and cpm2_fastbrg don't support external clocks. This patch adds a new exported __cpm2_setbrg function that takes the clock rate and clock source as extra parameters, and moves cpm_setbrg and cpm2_fastbrg to include/asm-powerpc/cpm2.h where they become inline wrappers around __cpm2_setbrg. Signed-off-by: Laurent Pinchart Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/cpm2.c | 34 ++++------------------------------ 1 file changed, 4 insertions(+), 30 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c index 9311778a508..f1c3395633b 100644 --- a/arch/powerpc/sysdev/cpm2.c +++ b/arch/powerpc/sysdev/cpm2.c @@ -115,16 +115,10 @@ EXPORT_SYMBOL(cpm_command); * Baud rate clocks are zero-based in the driver code (as that maps * to port numbers). Documentation uses 1-based numbering. */ -#define BRG_INT_CLK (get_brgfreq()) -#define BRG_UART_CLK (BRG_INT_CLK/16) - -/* This function is used by UARTS, or anything else that uses a 16x - * oversampled clock. - */ -void -cpm_setbrg(uint brg, uint rate) +void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src) { u32 __iomem *bp; + u32 val; /* This is good enough to get SMCs running..... */ @@ -135,34 +129,14 @@ cpm_setbrg(uint brg, uint rate) brg -= 4; } bp += brg; - out_be32(bp, (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN); - - cpm2_unmap(bp); -} - -/* This function is used to set high speed synchronous baud rate - * clocks. - */ -void -cpm2_fastbrg(uint brg, uint rate, int div16) -{ - u32 __iomem *bp; - u32 val; - - if (brg < 4) { - bp = cpm2_map_size(im_brgc1, 16); - } else { - bp = cpm2_map_size(im_brgc5, 16); - brg -= 4; - } - bp += brg; - val = ((BRG_INT_CLK / rate) << 1) | CPM_BRG_EN; + val = (((clk / rate) - 1) << 1) | CPM_BRG_EN | src; if (div16) val |= CPM_BRG_DIV16; out_be32(bp, val); cpm2_unmap(bp); } +EXPORT_SYMBOL(__cpm2_setbrg); int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode) { -- cgit v1.2.3 From cf0d19fb3032ebf2cf8e5217da00f51dc025aa8e Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Tue, 29 Jul 2008 15:29:24 -0500 Subject: powerpc/fsl: proliferate simple-bus compatibility to soc nodes add simple-bus compatible property to soc nodes for 83xx/85xx platforms that were missing them. Add same to platform probe code. This fixes SoC device drivers (such as talitos) to succeed in matching devices present in the soc node. also update mpc836x_rdk dts to new SEC bindings (overlooked in commit 3fd4473: powerpc/fsl: update crypto node definition and device tree instances). Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc832x_mds.dts | 1 + arch/powerpc/boot/dts/mpc832x_rdb.dts | 1 + arch/powerpc/boot/dts/mpc8349emitx.dts | 1 + arch/powerpc/boot/dts/mpc8349emitxgp.dts | 1 + arch/powerpc/boot/dts/mpc834x_mds.dts | 1 + arch/powerpc/boot/dts/mpc836x_mds.dts | 1 + arch/powerpc/boot/dts/mpc836x_rdk.dts | 16 ++++++---------- arch/powerpc/boot/dts/mpc8377_mds.dts | 1 + arch/powerpc/boot/dts/mpc8378_mds.dts | 1 + arch/powerpc/boot/dts/mpc8379_mds.dts | 1 + arch/powerpc/boot/dts/mpc8536ds.dts | 1 + arch/powerpc/boot/dts/mpc8540ads.dts | 1 + arch/powerpc/boot/dts/mpc8541cds.dts | 1 + arch/powerpc/boot/dts/mpc8544ds.dts | 1 + arch/powerpc/boot/dts/mpc8548cds.dts | 1 + arch/powerpc/boot/dts/mpc8555cds.dts | 1 + arch/powerpc/boot/dts/mpc8560ads.dts | 1 + arch/powerpc/boot/dts/mpc8568mds.dts | 1 + arch/powerpc/boot/dts/mpc8572ds.dts | 1 + arch/powerpc/platforms/83xx/mpc832x_mds.c | 1 + arch/powerpc/platforms/83xx/mpc832x_rdb.c | 1 + arch/powerpc/platforms/83xx/mpc834x_itx.c | 1 + arch/powerpc/platforms/83xx/mpc834x_mds.c | 1 + arch/powerpc/platforms/83xx/mpc836x_mds.c | 1 + arch/powerpc/platforms/83xx/sbc834x.c | 1 + arch/powerpc/platforms/85xx/ksi8560.c | 1 + arch/powerpc/platforms/85xx/mpc8536_ds.c | 1 + arch/powerpc/platforms/85xx/mpc85xx_ads.c | 1 + arch/powerpc/platforms/85xx/mpc85xx_ds.c | 1 + arch/powerpc/platforms/85xx/mpc85xx_mds.c | 1 + arch/powerpc/platforms/85xx/sbc8560.c | 1 + 31 files changed, 36 insertions(+), 10 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts index 7345743d3d9..fbc930410ff 100644 --- a/arch/powerpc/boot/dts/mpc832x_mds.dts +++ b/arch/powerpc/boot/dts/mpc832x_mds.dts @@ -68,6 +68,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <132000000>; diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts index e74c045a0f8..b157d1885a2 100644 --- a/arch/powerpc/boot/dts/mpc832x_rdb.dts +++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts @@ -51,6 +51,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index 8dfab566258..700e076ef3f 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -52,6 +52,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <0>; // from bootloader diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts index 49ca3497eef..cdd3063258e 100644 --- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts +++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts @@ -50,6 +50,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <0>; // from bootloader diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts index ba586cb7afb..783241c0024 100644 --- a/arch/powerpc/boot/dts/mpc834x_mds.dts +++ b/arch/powerpc/boot/dts/mpc834x_mds.dts @@ -57,6 +57,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts index 3701dae1ee0..a3b76a70995 100644 --- a/arch/powerpc/boot/dts/mpc836x_mds.dts +++ b/arch/powerpc/boot/dts/mpc836x_mds.dts @@ -61,6 +61,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <264000000>; diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts index 8acd1d6577f..89c9202f8bd 100644 --- a/arch/powerpc/boot/dts/mpc836x_rdk.dts +++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts @@ -149,18 +149,14 @@ }; crypto@30000 { - compatible = "fsl,sec2-crypto"; + compatible = "fsl,sec2.0"; reg = <0x30000 0x10000>; - interrupts = <11 8>; + interrupts = <11 0x8>; interrupt-parent = <&ipic>; - num-channels = <4>; - channel-fifo-len = <24>; - exec-units-mask = <0x7e>; - /* - * desc mask is for rev1.x, we need runtime fixup - * for >=2.x - */ - descriptor-types-mask = <0x1010ebf>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x7e>; + fsl,descriptor-types-mask = <0x01010ebf>; }; ipic: interrupt-controller@700 { diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts index 0a700cb5f61..432782b6d20 100644 --- a/arch/powerpc/boot/dts/mpc8377_mds.dts +++ b/arch/powerpc/boot/dts/mpc8377_mds.dts @@ -117,6 +117,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts index 29c8c76a58f..ed32c8ddafe 100644 --- a/arch/powerpc/boot/dts/mpc8378_mds.dts +++ b/arch/powerpc/boot/dts/mpc8378_mds.dts @@ -117,6 +117,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts index d641a8985ea..f4db9ed4a30 100644 --- a/arch/powerpc/boot/dts/mpc8379_mds.dts +++ b/arch/powerpc/boot/dts/mpc8379_mds.dts @@ -117,6 +117,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts index 02cfa24a169..1505d6855ef 100644 --- a/arch/powerpc/boot/dts/mpc8536ds.dts +++ b/arch/powerpc/boot/dts/mpc8536ds.dts @@ -49,6 +49,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xffe00000 0x100000>; reg = <0xffe00000 0x1000>; bus-frequency = <0>; // Filled out by uboot. diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts index f2273a872b1..9568bfaff8f 100644 --- a/arch/powerpc/boot/dts/mpc8540ads.dts +++ b/arch/powerpc/boot/dts/mpc8540ads.dts @@ -53,6 +53,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x100000>; reg = <0xe0000000 0x100000>; // CCSRBAR 1M bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts index c4469f19ff8..6480f4fd96e 100644 --- a/arch/powerpc/boot/dts/mpc8541cds.dts +++ b/arch/powerpc/boot/dts/mpc8541cds.dts @@ -53,6 +53,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x100000>; reg = <0xe0000000 0x1000>; // CCSRBAR 1M bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts index 7d3829d3495..f1fb20737e3 100644 --- a/arch/powerpc/boot/dts/mpc8544ds.dts +++ b/arch/powerpc/boot/dts/mpc8544ds.dts @@ -54,6 +54,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x100000>; reg = <0xe0000000 0x1000>; // CCSRBAR 1M diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts index d84466bb7ec..431b496270d 100644 --- a/arch/powerpc/boot/dts/mpc8548cds.dts +++ b/arch/powerpc/boot/dts/mpc8548cds.dts @@ -58,6 +58,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x100000>; reg = <0xe0000000 0x1000>; // CCSRBAR bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts index e03a7800628..d833a5c4f47 100644 --- a/arch/powerpc/boot/dts/mpc8555cds.dts +++ b/arch/powerpc/boot/dts/mpc8555cds.dts @@ -53,6 +53,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x100000>; reg = <0xe0000000 0x1000>; // CCSRBAR 1M bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts index ba8159de040..4d1f2f28409 100644 --- a/arch/powerpc/boot/dts/mpc8560ads.dts +++ b/arch/powerpc/boot/dts/mpc8560ads.dts @@ -53,6 +53,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x100000>; reg = <0xe0000000 0x200>; bus-frequency = <330000000>; diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts index 9c30a34821d..a15f10343f5 100644 --- a/arch/powerpc/boot/dts/mpc8568mds.dts +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -60,6 +60,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x100000>; reg = <0xe0000000 0x1000>; bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts index 08c61e3daec..e124dd18fb5 100644 --- a/arch/powerpc/boot/dts/mpc8572ds.dts +++ b/arch/powerpc/boot/dts/mpc8572ds.dts @@ -68,6 +68,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xffe00000 0x100000>; reg = <0xffe00000 0x1000>; // CCSRBAR & soc regs, remove once parse code for immrbase fixed bus-frequency = <0>; // Filled out by uboot. diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c index dd4be4aee31..ec43477caa6 100644 --- a/arch/powerpc/platforms/83xx/mpc832x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c @@ -105,6 +105,7 @@ static void __init mpc832x_sys_setup_arch(void) static struct of_device_id mpc832x_ids[] = { { .type = "soc", }, { .compatible = "soc", }, + { .compatible = "simple-bus", }, { .type = "qe", }, { .compatible = "fsl,qe", }, {}, diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c index f049d692d4c..0300268ce5b 100644 --- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c +++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c @@ -115,6 +115,7 @@ static void __init mpc832x_rdb_setup_arch(void) static struct of_device_id mpc832x_ids[] = { { .type = "soc", }, { .compatible = "soc", }, + { .compatible = "simple-bus", }, { .type = "qe", }, { .compatible = "fsl,qe", }, {}, diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c index 7301d77a08e..76092d37c7d 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_itx.c +++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c @@ -41,6 +41,7 @@ static struct of_device_id __initdata mpc834x_itx_ids[] = { { .compatible = "fsl,pq2pro-localbus", }, + { .compatible = "simple-bus", }, {}, }; diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c index 30d509aa9f0..fc3f2ed1f3e 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c @@ -111,6 +111,7 @@ static void __init mpc834x_mds_init_IRQ(void) static struct of_device_id mpc834x_ids[] = { { .type = "soc", }, { .compatible = "soc", }, + { .compatible = "simple-bus", }, {}, }; diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c index 75b80e83657..9d46e5bdd10 100644 --- a/arch/powerpc/platforms/83xx/mpc836x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c @@ -136,6 +136,7 @@ static void __init mpc836x_mds_setup_arch(void) static struct of_device_id mpc836x_ids[] = { { .type = "soc", }, { .compatible = "soc", }, + { .compatible = "simple-bus", }, { .type = "qe", }, { .compatible = "fsl,qe", }, {}, diff --git a/arch/powerpc/platforms/83xx/sbc834x.c b/arch/powerpc/platforms/83xx/sbc834x.c index fc21f5c15ba..156c4e21800 100644 --- a/arch/powerpc/platforms/83xx/sbc834x.c +++ b/arch/powerpc/platforms/83xx/sbc834x.c @@ -83,6 +83,7 @@ static void __init sbc834x_init_IRQ(void) static struct __initdata of_device_id sbc834x_ids[] = { { .type = "soc", }, { .compatible = "soc", }, + { .compatible = "simple-bus", }, {}, }; diff --git a/arch/powerpc/platforms/85xx/ksi8560.c b/arch/powerpc/platforms/85xx/ksi8560.c index 2145adeb220..8a3b117b6ce 100644 --- a/arch/powerpc/platforms/85xx/ksi8560.c +++ b/arch/powerpc/platforms/85xx/ksi8560.c @@ -222,6 +222,7 @@ static void ksi8560_show_cpuinfo(struct seq_file *m) static struct of_device_id __initdata of_bus_ids[] = { { .type = "soc", }, + { .type = "simple-bus", }, { .name = "cpm", }, { .name = "localbus", }, {}, diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c index 6b846aa1ced..1bf5aefdfeb 100644 --- a/arch/powerpc/platforms/85xx/mpc8536_ds.c +++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c @@ -91,6 +91,7 @@ static void __init mpc8536_ds_setup_arch(void) static struct of_device_id __initdata mpc8536_ds_ids[] = { { .type = "soc", }, { .compatible = "soc", }, + { .compatible = "simple-bus", }, {}, }; diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c index ba498d6f2d0..d17807a6b89 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -230,6 +230,7 @@ static struct of_device_id __initdata of_bus_ids[] = { { .type = "soc", }, { .name = "cpm", }, { .name = "localbus", }, + { .compatible = "simple-bus", }, {}, }; diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c index 00c53580664..483b65cbaba 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c @@ -186,6 +186,7 @@ static int __init mpc8544_ds_probe(void) static struct of_device_id __initdata mpc85xxds_ids[] = { { .type = "soc", }, { .compatible = "soc", }, + { .compatible = "simple-bus", }, {}, }; diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index 43a459f63e3..2494c515591 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -260,6 +260,7 @@ machine_arch_initcall(mpc85xx_mds, board_fixups); static struct of_device_id mpc85xx_ids[] = { { .type = "soc", }, { .compatible = "soc", }, + { .compatible = "simple-bus", }, { .type = "qe", }, { .compatible = "fsl,qe", }, {}, diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c index 2c580cd24e4..6509ade7166 100644 --- a/arch/powerpc/platforms/85xx/sbc8560.c +++ b/arch/powerpc/platforms/85xx/sbc8560.c @@ -217,6 +217,7 @@ static struct of_device_id __initdata of_bus_ids[] = { { .type = "soc", }, { .name = "cpm", }, { .name = "localbus", }, + { .compatible = "simple-bus", }, {}, }; -- cgit v1.2.3 From 9ee07f91a1fab61ff0d8d25be43351a049c0a821 Mon Sep 17 00:00:00 2001 From: Nathan Fontenot Date: Sat, 26 Jul 2008 04:27:06 +1000 Subject: powerpc: Allow non-hcall return values for lparcfg writes The code to handle writes to /proc/ppc64/lparcfg incorrectly assumes that the return code from the helper routines to update processor or memory entitlement return a hcall return value. It then assumes any non-hcall return value is bad and sets the return code for the write to be -EIO. The update_[mp]pp routines can return values other than a hcall return value. This patch removes the automatic setting of any return code that is not an hcall return value from these routines to -EIO. Signed-off-by: Nathan Fontenot Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/lparcfg.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index 9f856a0c3e3..1a09719c762 100644 --- a/arch/powerpc/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -636,10 +636,6 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf, retval = -EIO; } else if (retval == H_PARAMETER) { retval = -EINVAL; - } else { - printk(KERN_WARNING "%s: received unknown hv return code %ld", - __func__, retval); - retval = -EIO; } return retval; -- cgit v1.2.3 From 33b3f03dccc26c377e9689790ecc41079a0c9ca7 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Tue, 29 Jul 2008 01:13:14 +1000 Subject: powerpc: Correctly hookup PTRACE_GET/SETVSRREGS for 32 bit processes Fix bug where PTRACE_GET/SETVSRREGS are not connected for 32 bit processes. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/ptrace32.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/ptrace32.c b/arch/powerpc/kernel/ptrace32.c index 67bf1a1e7e1..197d49c790a 100644 --- a/arch/powerpc/kernel/ptrace32.c +++ b/arch/powerpc/kernel/ptrace32.c @@ -294,6 +294,8 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request, case PTRACE_SETFPREGS: case PTRACE_GETVRREGS: case PTRACE_SETVRREGS: + case PTRACE_GETVSRREGS: + case PTRACE_SETVSRREGS: case PTRACE_GETREGS64: case PTRACE_SETREGS64: case PPC_PTRACE_GETFPREGS: -- cgit v1.2.3 From 1ac42ef844d7c0996f15c6f94f463ac94cb80818 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Tue, 29 Jul 2008 01:13:14 +1000 Subject: powerpc: Fix ptrace buffer size for VSX Fix cut-and-paste error in the size setting for ptrace buffers for VSX. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/ptrace.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 6b66cd85b43..97d5dede817 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -975,15 +975,13 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) case PTRACE_GETVSRREGS: return copy_regset_to_user(child, &user_ppc_native_view, REGSET_VSX, - 0, (32 * sizeof(vector128) + - sizeof(u32)), + 0, 32 * sizeof(double), (void __user *) data); case PTRACE_SETVSRREGS: return copy_regset_from_user(child, &user_ppc_native_view, REGSET_VSX, - 0, (32 * sizeof(vector128) + - sizeof(u32)), + 0, 32 * sizeof(double), (const void __user *) data); #endif #ifdef CONFIG_SPE -- cgit v1.2.3 From 7d2a175b9bf6e9422bebe95130a3c79a25ff4602 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Tue, 29 Jul 2008 01:13:14 +1000 Subject: powerpc: Don't use the wrong thread_struct for ptrace get/set VSX regs In PTRACE_GET/SETVSRREGS, we should be using the thread we are ptracing rather than current. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/ptrace.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 97d5dede817..3635be61f89 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -375,7 +375,7 @@ static int vsr_get(struct task_struct *target, const struct user_regset *regset, flush_vsx_to_thread(target); for (i = 0; i < 32 ; i++) - buf[i] = current->thread.fpr[i][TS_VSRLOWOFFSET]; + buf[i] = target->thread.fpr[i][TS_VSRLOWOFFSET]; ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, buf, 0, 32 * sizeof(double)); @@ -394,7 +394,7 @@ static int vsr_set(struct task_struct *target, const struct user_regset *regset, ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, buf, 0, 32 * sizeof(double)); for (i = 0; i < 32 ; i++) - current->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i]; + target->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i]; return ret; -- cgit v1.2.3 From ce0ad7f0952581ba75ab6aee55bb1ed9bb22cf4f Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Wed, 30 Jul 2008 15:23:13 +1000 Subject: powerpc/mm: Lockless get_user_pages_fast() for 64-bit (v3) Implement lockless get_user_pages_fast for 64-bit powerpc. Page table existence is guaranteed with RCU, and speculative page references are used to take a reference to the pages without having a prior existence guarantee on them. Signed-off-by: Nick Piggin Signed-off-by: Dave Kleikamp Signed-off-by: Andrew Morton Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/Kconfig | 3 + arch/powerpc/mm/Makefile | 3 +- arch/powerpc/mm/gup.c | 280 +++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 285 insertions(+), 1 deletion(-) create mode 100644 arch/powerpc/mm/gup.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 587da5e0990..63c9cafda9c 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -42,6 +42,9 @@ config GENERIC_HARDIRQS bool default y +config HAVE_GET_USER_PAGES_FAST + def_bool PPC64 + config HAVE_SETUP_PER_CPU_AREA def_bool PPC64 diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile index 1c00e0196f6..e7392b45a5e 100644 --- a/arch/powerpc/mm/Makefile +++ b/arch/powerpc/mm/Makefile @@ -12,7 +12,8 @@ obj-y := fault.o mem.o \ mmu_context_$(CONFIG_WORD_SIZE).o hash-$(CONFIG_PPC_NATIVE) := hash_native_64.o obj-$(CONFIG_PPC64) += hash_utils_64.o \ - slb_low.o slb.o stab.o mmap.o $(hash-y) + slb_low.o slb.o stab.o \ + gup.o mmap.o $(hash-y) obj-$(CONFIG_PPC_STD_MMU_32) += ppc_mmu_32.o obj-$(CONFIG_PPC_STD_MMU) += hash_low_$(CONFIG_WORD_SIZE).o \ tlb_$(CONFIG_WORD_SIZE).o diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c new file mode 100644 index 00000000000..9fdf4d6335e --- /dev/null +++ b/arch/powerpc/mm/gup.c @@ -0,0 +1,280 @@ +/* + * Lockless get_user_pages_fast for powerpc + * + * Copyright (C) 2008 Nick Piggin + * Copyright (C) 2008 Novell Inc. + */ +#undef DEBUG + +#include +#include +#include +#include +#include +#include +#include + +/* + * The performance critical leaf functions are made noinline otherwise gcc + * inlines everything into a single function which results in too much + * register pressure. + */ +static noinline int gup_pte_range(pmd_t pmd, unsigned long addr, + unsigned long end, int write, struct page **pages, int *nr) +{ + unsigned long mask, result; + pte_t *ptep; + + result = _PAGE_PRESENT|_PAGE_USER; + if (write) + result |= _PAGE_RW; + mask = result | _PAGE_SPECIAL; + + ptep = pte_offset_kernel(&pmd, addr); + do { + pte_t pte = *ptep; + struct page *page; + + if ((pte_val(pte) & mask) != result) + return 0; + VM_BUG_ON(!pfn_valid(pte_pfn(pte))); + page = pte_page(pte); + if (!page_cache_get_speculative(page)) + return 0; + if (unlikely(pte != *ptep)) { + put_page(page); + return 0; + } + pages[*nr] = page; + (*nr)++; + + } while (ptep++, addr += PAGE_SIZE, addr != end); + + return 1; +} + +#ifdef CONFIG_HUGETLB_PAGE +static noinline int gup_huge_pte(pte_t *ptep, struct hstate *hstate, + unsigned long *addr, unsigned long end, + int write, struct page **pages, int *nr) +{ + unsigned long mask; + unsigned long pte_end; + struct page *head, *page; + pte_t pte; + int refs; + + pte_end = (*addr + huge_page_size(hstate)) & huge_page_mask(hstate); + if (pte_end < end) + end = pte_end; + + pte = *ptep; + mask = _PAGE_PRESENT|_PAGE_USER; + if (write) + mask |= _PAGE_RW; + if ((pte_val(pte) & mask) != mask) + return 0; + /* hugepages are never "special" */ + VM_BUG_ON(!pfn_valid(pte_pfn(pte))); + + refs = 0; + head = pte_page(pte); + page = head + ((*addr & ~huge_page_mask(hstate)) >> PAGE_SHIFT); + do { + VM_BUG_ON(compound_head(page) != head); + pages[*nr] = page; + (*nr)++; + page++; + refs++; + } while (*addr += PAGE_SIZE, *addr != end); + + if (!page_cache_add_speculative(head, refs)) { + *nr -= refs; + return 0; + } + if (unlikely(pte != *ptep)) { + /* Could be optimized better */ + while (*nr) { + put_page(page); + (*nr)--; + } + } + + return 1; +} +#endif /* CONFIG_HUGETLB_PAGE */ + +static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end, + int write, struct page **pages, int *nr) +{ + unsigned long next; + pmd_t *pmdp; + + pmdp = pmd_offset(&pud, addr); + do { + pmd_t pmd = *pmdp; + + next = pmd_addr_end(addr, end); + if (pmd_none(pmd)) + return 0; + if (!gup_pte_range(pmd, addr, next, write, pages, nr)) + return 0; + } while (pmdp++, addr = next, addr != end); + + return 1; +} + +static int gup_pud_range(pgd_t pgd, unsigned long addr, unsigned long end, + int write, struct page **pages, int *nr) +{ + unsigned long next; + pud_t *pudp; + + pudp = pud_offset(&pgd, addr); + do { + pud_t pud = *pudp; + + next = pud_addr_end(addr, end); + if (pud_none(pud)) + return 0; + if (!gup_pmd_range(pud, addr, next, write, pages, nr)) + return 0; + } while (pudp++, addr = next, addr != end); + + return 1; +} + +int get_user_pages_fast(unsigned long start, int nr_pages, int write, + struct page **pages) +{ + struct mm_struct *mm = current->mm; + unsigned long addr, len, end; + unsigned long next; + pgd_t *pgdp; + int psize, nr = 0; + unsigned int shift; + + pr_debug("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read"); + + start &= PAGE_MASK; + addr = start; + len = (unsigned long) nr_pages << PAGE_SHIFT; + end = start + len; + + if (unlikely(!access_ok(write ? VERIFY_WRITE : VERIFY_READ, + start, len))) + goto slow_irqon; + + pr_debug(" aligned: %lx .. %lx\n", start, end); + +#ifdef CONFIG_HUGETLB_PAGE + /* We bail out on slice boundary crossing when hugetlb is + * enabled in order to not have to deal with two different + * page table formats + */ + if (addr < SLICE_LOW_TOP) { + if (end > SLICE_LOW_TOP) + goto slow_irqon; + + if (unlikely(GET_LOW_SLICE_INDEX(addr) != + GET_LOW_SLICE_INDEX(end - 1))) + goto slow_irqon; + } else { + if (unlikely(GET_HIGH_SLICE_INDEX(addr) != + GET_HIGH_SLICE_INDEX(end - 1))) + goto slow_irqon; + } +#endif /* CONFIG_HUGETLB_PAGE */ + + /* + * XXX: batch / limit 'nr', to avoid large irq off latency + * needs some instrumenting to determine the common sizes used by + * important workloads (eg. DB2), and whether limiting the batch size + * will decrease performance. + * + * It seems like we're in the clear for the moment. Direct-IO is + * the main guy that batches up lots of get_user_pages, and even + * they are limited to 64-at-a-time which is not so many. + */ + /* + * This doesn't prevent pagetable teardown, but does prevent + * the pagetables from being freed on powerpc. + * + * So long as we atomically load page table pointers versus teardown, + * we can follow the address down to the the page and take a ref on it. + */ + local_irq_disable(); + + psize = get_slice_psize(mm, addr); + shift = mmu_psize_defs[psize].shift; + +#ifdef CONFIG_HUGETLB_PAGE + if (unlikely(mmu_huge_psizes[psize])) { + pte_t *ptep; + unsigned long a = addr; + unsigned long sz = ((1UL) << shift); + struct hstate *hstate = size_to_hstate(sz); + + BUG_ON(!hstate); + /* + * XXX: could be optimized to avoid hstate + * lookup entirely (just use shift) + */ + + do { + VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, a)].shift); + ptep = huge_pte_offset(mm, a); + pr_debug(" %016lx: huge ptep %p\n", a, ptep); + if (!ptep || !gup_huge_pte(ptep, hstate, &a, end, write, pages, + &nr)) + goto slow; + } while (a != end); + } else +#endif /* CONFIG_HUGETLB_PAGE */ + { + pgdp = pgd_offset(mm, addr); + do { + pgd_t pgd = *pgdp; + + VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, addr)].shift); + pr_debug(" %016lx: normal pgd %p\n", addr, (void *)pgd); + next = pgd_addr_end(addr, end); + if (pgd_none(pgd)) + goto slow; + if (!gup_pud_range(pgd, addr, next, write, pages, &nr)) + goto slow; + } while (pgdp++, addr = next, addr != end); + } + local_irq_enable(); + + VM_BUG_ON(nr != (end - start) >> PAGE_SHIFT); + return nr; + + { + int ret; + +slow: + local_irq_enable(); +slow_irqon: + pr_debug(" slow path ! nr = %d\n", nr); + + /* Try to get the remaining pages with get_user_pages */ + start += nr << PAGE_SHIFT; + pages += nr; + + down_read(&mm->mmap_sem); + ret = get_user_pages(current, mm, start, + (end - start) >> PAGE_SHIFT, write, 0, pages, NULL); + up_read(&mm->mmap_sem); + + /* Have to be a bit careful with return values */ + if (nr > 0) { + if (ret < 0) + ret = nr; + else + ret += nr; + } + + return ret; + } +} -- cgit v1.2.3 From a1531acd43310a7e4571d52e8846640667f4c74b Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Tue, 29 Jul 2008 22:32:58 -0700 Subject: cpufreq acpi: only call _PPC after cpufreq ACPI init funcs got called already Ingo Molnar provided a fix to not call _PPC at processor driver initialization time in "[PATCH] ACPI: fix cpufreq regression" (git commit e4233dec749a3519069d9390561b5636a75c7579) But it can still happen that _PPC is called at processor driver initialization time. This patch should make sure that this is not possible anymore. Signed-off-by: Thomas Renninger Cc: Andi Kleen Cc: Len Brown Cc: Dave Jones Cc: Ingo Molnar Cc: Venkatesh Pallipadi Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c b/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c index 69288f65314..3233fe84d15 100644 --- a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c +++ b/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c @@ -96,6 +96,12 @@ static int pmi_notifier(struct notifier_block *nb, struct cpufreq_frequency_table *cbe_freqs; u8 node; + /* Should this really be called for CPUFREQ_ADJUST, CPUFREQ_INCOMPATIBLE + * and CPUFREQ_NOTIFY policy events?) + */ + if (event == CPUFREQ_START) + return 0; + cbe_freqs = cpufreq_frequency_get_table(policy->cpu); node = cbe_cpu_to_node(policy->cpu); -- cgit v1.2.3 From b8b572e1015f81b4e748417be2629dfe51ab99f9 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Fri, 1 Aug 2008 15:20:30 +1000 Subject: powerpc: Move include files to arch/powerpc/include/asm from include/asm-powerpc. This is the result of a mkdir arch/powerpc/include/asm git mv include/asm-powerpc/* arch/powerpc/include/asm Followed by a few documentation/comment fixups and a couple of places where was being used explicitly. Of the latter only one was outside the arch code and it is a driver only built for powerpc. Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- arch/powerpc/boot/io.h | 2 +- arch/powerpc/include/asm/8253pit.h | 10 + arch/powerpc/include/asm/8xx_immap.h | 564 ++++++++++ arch/powerpc/include/asm/Kbuild | 37 + arch/powerpc/include/asm/a.out.h | 20 + arch/powerpc/include/asm/abs_addr.h | 75 ++ arch/powerpc/include/asm/agp.h | 22 + arch/powerpc/include/asm/asm-compat.h | 69 ++ arch/powerpc/include/asm/atomic.h | 479 +++++++++ arch/powerpc/include/asm/auxvec.h | 19 + arch/powerpc/include/asm/backlight.h | 41 + arch/powerpc/include/asm/bitops.h | 410 ++++++++ arch/powerpc/include/asm/bootx.h | 171 ++++ arch/powerpc/include/asm/btext.h | 28 + arch/powerpc/include/asm/bug.h | 121 +++ arch/powerpc/include/asm/bugs.h | 18 + arch/powerpc/include/asm/byteorder.h | 89 ++ arch/powerpc/include/asm/cache.h | 45 + arch/powerpc/include/asm/cacheflush.h | 75 ++ arch/powerpc/include/asm/cell-pmu.h | 105 ++ arch/powerpc/include/asm/cell-regs.h | 315 ++++++ arch/powerpc/include/asm/checksum.h | 117 +++ arch/powerpc/include/asm/clk_interface.h | 20 + arch/powerpc/include/asm/code-patching.h | 54 + arch/powerpc/include/asm/compat.h | 214 ++++ arch/powerpc/include/asm/cpm.h | 106 ++ arch/powerpc/include/asm/cpm1.h | 652 ++++++++++++ arch/powerpc/include/asm/cpm2.h | 1195 ++++++++++++++++++++++ arch/powerpc/include/asm/cputable.h | 514 ++++++++++ arch/powerpc/include/asm/cputhreads.h | 71 ++ arch/powerpc/include/asm/cputime.h | 235 +++++ arch/powerpc/include/asm/current.h | 40 + arch/powerpc/include/asm/dbdma.h | 108 ++ arch/powerpc/include/asm/dcr-generic.h | 49 + arch/powerpc/include/asm/dcr-mmio.h | 61 ++ arch/powerpc/include/asm/dcr-native.h | 116 +++ arch/powerpc/include/asm/dcr-regs.h | 149 +++ arch/powerpc/include/asm/dcr.h | 82 ++ arch/powerpc/include/asm/delay.h | 34 + arch/powerpc/include/asm/device.h | 24 + arch/powerpc/include/asm/div64.h | 1 + arch/powerpc/include/asm/dma-mapping.h | 474 +++++++++ arch/powerpc/include/asm/dma.h | 360 +++++++ arch/powerpc/include/asm/edac.h | 40 + arch/powerpc/include/asm/eeh.h | 211 ++++ arch/powerpc/include/asm/eeh_event.h | 53 + arch/powerpc/include/asm/elf.h | 424 ++++++++ arch/powerpc/include/asm/emergency-restart.h | 1 + arch/powerpc/include/asm/errno.h | 11 + arch/powerpc/include/asm/exception.h | 311 ++++++ arch/powerpc/include/asm/fb.h | 21 + arch/powerpc/include/asm/fcntl.h | 11 + arch/powerpc/include/asm/feature-fixups.h | 126 +++ arch/powerpc/include/asm/firmware.h | 132 +++ arch/powerpc/include/asm/fixmap.h | 106 ++ arch/powerpc/include/asm/floppy.h | 213 ++++ arch/powerpc/include/asm/fs_pd.h | 50 + arch/powerpc/include/asm/fsl_gtm.h | 47 + arch/powerpc/include/asm/fsl_lbc.h | 311 ++++++ arch/powerpc/include/asm/ftrace.h | 14 + arch/powerpc/include/asm/futex.h | 117 +++ arch/powerpc/include/asm/gpio.h | 56 + arch/powerpc/include/asm/grackle.h | 12 + arch/powerpc/include/asm/hardirq.h | 29 + arch/powerpc/include/asm/heathrow.h | 67 ++ arch/powerpc/include/asm/highmem.h | 138 +++ arch/powerpc/include/asm/hugetlb.h | 75 ++ arch/powerpc/include/asm/hvcall.h | 296 ++++++ arch/powerpc/include/asm/hvconsole.h | 41 + arch/powerpc/include/asm/hvcserver.h | 59 ++ arch/powerpc/include/asm/hw_irq.h | 135 +++ arch/powerpc/include/asm/hydra.h | 102 ++ arch/powerpc/include/asm/i8259.h | 17 + arch/powerpc/include/asm/ibmebus.h | 60 ++ arch/powerpc/include/asm/ide.h | 59 ++ arch/powerpc/include/asm/immap_86xx.h | 156 +++ arch/powerpc/include/asm/immap_cpm2.h | 650 ++++++++++++ arch/powerpc/include/asm/immap_qe.h | 483 +++++++++ arch/powerpc/include/asm/io-defs.h | 60 ++ arch/powerpc/include/asm/io.h | 787 ++++++++++++++ arch/powerpc/include/asm/ioctl.h | 13 + arch/powerpc/include/asm/ioctls.h | 110 ++ arch/powerpc/include/asm/iommu.h | 131 +++ arch/powerpc/include/asm/ipcbuf.h | 34 + arch/powerpc/include/asm/ipic.h | 91 ++ arch/powerpc/include/asm/irq.h | 654 ++++++++++++ arch/powerpc/include/asm/irq_regs.h | 2 + arch/powerpc/include/asm/irqflags.h | 42 + arch/powerpc/include/asm/iseries/alpaca.h | 31 + arch/powerpc/include/asm/iseries/hv_call.h | 111 ++ arch/powerpc/include/asm/iseries/hv_call_event.h | 201 ++++ arch/powerpc/include/asm/iseries/hv_call_sc.h | 50 + arch/powerpc/include/asm/iseries/hv_call_xm.h | 61 ++ arch/powerpc/include/asm/iseries/hv_lp_config.h | 128 +++ arch/powerpc/include/asm/iseries/hv_lp_event.h | 162 +++ arch/powerpc/include/asm/iseries/hv_types.h | 112 ++ arch/powerpc/include/asm/iseries/iommu.h | 41 + arch/powerpc/include/asm/iseries/it_lp_queue.h | 78 ++ arch/powerpc/include/asm/iseries/lpar_map.h | 85 ++ arch/powerpc/include/asm/iseries/mf.h | 51 + arch/powerpc/include/asm/iseries/vio.h | 265 +++++ arch/powerpc/include/asm/kdebug.h | 15 + arch/powerpc/include/asm/kdump.h | 35 + arch/powerpc/include/asm/kexec.h | 160 +++ arch/powerpc/include/asm/keylargo.h | 261 +++++ arch/powerpc/include/asm/kgdb.h | 63 ++ arch/powerpc/include/asm/kmap_types.h | 33 + arch/powerpc/include/asm/kprobes.h | 118 +++ arch/powerpc/include/asm/kvm.h | 55 + arch/powerpc/include/asm/kvm_asm.h | 55 + arch/powerpc/include/asm/kvm_host.h | 155 +++ arch/powerpc/include/asm/kvm_para.h | 37 + arch/powerpc/include/asm/kvm_ppc.h | 95 ++ arch/powerpc/include/asm/libata-portmap.h | 12 + arch/powerpc/include/asm/linkage.h | 6 + arch/powerpc/include/asm/lmb.h | 15 + arch/powerpc/include/asm/local.h | 200 ++++ arch/powerpc/include/asm/lppaca.h | 159 +++ arch/powerpc/include/asm/lv1call.h | 348 +++++++ arch/powerpc/include/asm/machdep.h | 365 +++++++ arch/powerpc/include/asm/macio.h | 142 +++ arch/powerpc/include/asm/mc146818rtc.h | 36 + arch/powerpc/include/asm/mediabay.h | 43 + arch/powerpc/include/asm/mman.h | 63 ++ arch/powerpc/include/asm/mmu-40x.h | 63 ++ arch/powerpc/include/asm/mmu-44x.h | 76 ++ arch/powerpc/include/asm/mmu-8xx.h | 145 +++ arch/powerpc/include/asm/mmu-fsl-booke.h | 82 ++ arch/powerpc/include/asm/mmu-hash32.h | 83 ++ arch/powerpc/include/asm/mmu-hash64.h | 478 +++++++++ arch/powerpc/include/asm/mmu.h | 26 + arch/powerpc/include/asm/mmu_context.h | 280 +++++ arch/powerpc/include/asm/mmzone.h | 47 + arch/powerpc/include/asm/module.h | 77 ++ arch/powerpc/include/asm/mpc512x.h | 22 + arch/powerpc/include/asm/mpc52xx.h | 295 ++++++ arch/powerpc/include/asm/mpc52xx_psc.h | 276 +++++ arch/powerpc/include/asm/mpc6xx.h | 6 + arch/powerpc/include/asm/mpc8260.h | 25 + arch/powerpc/include/asm/mpc86xx.h | 33 + arch/powerpc/include/asm/mpc8xx.h | 12 + arch/powerpc/include/asm/mpic.h | 481 +++++++++ arch/powerpc/include/asm/msgbuf.h | 33 + arch/powerpc/include/asm/mutex.h | 9 + arch/powerpc/include/asm/nvram.h | 139 +++ arch/powerpc/include/asm/of_device.h | 31 + arch/powerpc/include/asm/of_platform.h | 42 + arch/powerpc/include/asm/ohare.h | 54 + arch/powerpc/include/asm/oprofile_impl.h | 134 +++ arch/powerpc/include/asm/pSeries_reconfig.h | 29 + arch/powerpc/include/asm/paca.h | 112 ++ arch/powerpc/include/asm/page.h | 225 ++++ arch/powerpc/include/asm/page_32.h | 38 + arch/powerpc/include/asm/page_64.h | 185 ++++ arch/powerpc/include/asm/param.h | 22 + arch/powerpc/include/asm/parport.h | 39 + arch/powerpc/include/asm/pasemi_dma.h | 538 ++++++++++ arch/powerpc/include/asm/pci-bridge.h | 302 ++++++ arch/powerpc/include/asm/pci.h | 228 +++++ arch/powerpc/include/asm/percpu.h | 24 + arch/powerpc/include/asm/pgalloc-32.h | 43 + arch/powerpc/include/asm/pgalloc-64.h | 166 +++ arch/powerpc/include/asm/pgalloc.h | 12 + arch/powerpc/include/asm/pgtable-4k.h | 117 +++ arch/powerpc/include/asm/pgtable-64k.h | 155 +++ arch/powerpc/include/asm/pgtable-ppc32.h | 802 +++++++++++++++ arch/powerpc/include/asm/pgtable-ppc64.h | 468 +++++++++ arch/powerpc/include/asm/pgtable.h | 57 ++ arch/powerpc/include/asm/phyp_dump.h | 47 + arch/powerpc/include/asm/pmac_feature.h | 405 ++++++++ arch/powerpc/include/asm/pmac_low_i2c.h | 107 ++ arch/powerpc/include/asm/pmac_pfunc.h | 252 +++++ arch/powerpc/include/asm/pmc.h | 37 + arch/powerpc/include/asm/pmi.h | 66 ++ arch/powerpc/include/asm/poll.h | 1 + arch/powerpc/include/asm/posix_types.h | 128 +++ arch/powerpc/include/asm/ppc-pci.h | 149 +++ arch/powerpc/include/asm/ppc4xx.h | 18 + arch/powerpc/include/asm/ppc_asm.h | 689 +++++++++++++ arch/powerpc/include/asm/processor.h | 314 ++++++ arch/powerpc/include/asm/prom.h | 356 +++++++ arch/powerpc/include/asm/ps3.h | 519 ++++++++++ arch/powerpc/include/asm/ps3av.h | 744 ++++++++++++++ arch/powerpc/include/asm/ps3fb.h | 44 + arch/powerpc/include/asm/ps3stor.h | 71 ++ arch/powerpc/include/asm/ptrace.h | 293 ++++++ arch/powerpc/include/asm/qe.h | 642 ++++++++++++ arch/powerpc/include/asm/qe_ic.h | 128 +++ arch/powerpc/include/asm/reg.h | 788 ++++++++++++++ arch/powerpc/include/asm/reg_8xx.h | 42 + arch/powerpc/include/asm/reg_booke.h | 501 +++++++++ arch/powerpc/include/asm/reg_fsl_emb.h | 72 ++ arch/powerpc/include/asm/resource.h | 1 + arch/powerpc/include/asm/rheap.h | 89 ++ arch/powerpc/include/asm/rio.h | 18 + arch/powerpc/include/asm/rtas.h | 247 +++++ arch/powerpc/include/asm/rtc.h | 78 ++ arch/powerpc/include/asm/rwsem.h | 173 ++++ arch/powerpc/include/asm/scatterlist.h | 50 + arch/powerpc/include/asm/seccomp.h | 20 + arch/powerpc/include/asm/sections.h | 22 + arch/powerpc/include/asm/sembuf.h | 36 + arch/powerpc/include/asm/serial.h | 24 + arch/powerpc/include/asm/setjmp.h | 18 + arch/powerpc/include/asm/setup.h | 6 + arch/powerpc/include/asm/shmbuf.h | 59 ++ arch/powerpc/include/asm/shmparam.h | 6 + arch/powerpc/include/asm/sigcontext.h | 87 ++ arch/powerpc/include/asm/siginfo.h | 26 + arch/powerpc/include/asm/signal.h | 150 +++ arch/powerpc/include/asm/smp.h | 127 +++ arch/powerpc/include/asm/smu.h | 700 +++++++++++++ arch/powerpc/include/asm/socket.h | 64 ++ arch/powerpc/include/asm/sockios.h | 20 + arch/powerpc/include/asm/sparsemem.h | 32 + arch/powerpc/include/asm/spinlock.h | 295 ++++++ arch/powerpc/include/asm/spinlock_types.h | 20 + arch/powerpc/include/asm/spu.h | 732 +++++++++++++ arch/powerpc/include/asm/spu_csa.h | 266 +++++ arch/powerpc/include/asm/spu_info.h | 54 + arch/powerpc/include/asm/spu_priv1.h | 236 +++++ arch/powerpc/include/asm/sstep.h | 27 + arch/powerpc/include/asm/stat.h | 81 ++ arch/powerpc/include/asm/statfs.h | 60 ++ arch/powerpc/include/asm/string.h | 32 + arch/powerpc/include/asm/suspend.h | 9 + arch/powerpc/include/asm/synch.h | 44 + arch/powerpc/include/asm/syscall.h | 84 ++ arch/powerpc/include/asm/syscalls.h | 52 + arch/powerpc/include/asm/systbl.h | 324 ++++++ arch/powerpc/include/asm/system.h | 548 ++++++++++ arch/powerpc/include/asm/tce.h | 50 + arch/powerpc/include/asm/termbits.h | 209 ++++ arch/powerpc/include/asm/termios.h | 85 ++ arch/powerpc/include/asm/thread_info.h | 161 +++ arch/powerpc/include/asm/time.h | 255 +++++ arch/powerpc/include/asm/timex.h | 50 + arch/powerpc/include/asm/tlb.h | 81 ++ arch/powerpc/include/asm/tlbflush.h | 166 +++ arch/powerpc/include/asm/topology.h | 117 +++ arch/powerpc/include/asm/tsi108.h | 121 +++ arch/powerpc/include/asm/tsi108_irq.h | 124 +++ arch/powerpc/include/asm/tsi108_pci.h | 45 + arch/powerpc/include/asm/types.h | 75 ++ arch/powerpc/include/asm/uaccess.h | 496 +++++++++ arch/powerpc/include/asm/ucc.h | 64 ++ arch/powerpc/include/asm/ucc_fast.h | 244 +++++ arch/powerpc/include/asm/ucc_slow.h | 290 ++++++ arch/powerpc/include/asm/ucontext.h | 40 + arch/powerpc/include/asm/udbg.h | 55 + arch/powerpc/include/asm/uic.h | 21 + arch/powerpc/include/asm/unaligned.h | 16 + arch/powerpc/include/asm/uninorth.h | 229 +++++ arch/powerpc/include/asm/unistd.h | 398 +++++++ arch/powerpc/include/asm/user.h | 51 + arch/powerpc/include/asm/vdso.h | 78 ++ arch/powerpc/include/asm/vdso_datapage.h | 121 +++ arch/powerpc/include/asm/vga.h | 53 + arch/powerpc/include/asm/vio.h | 118 +++ arch/powerpc/include/asm/xilinx_intc.h | 20 + arch/powerpc/include/asm/xmon.h | 33 + arch/powerpc/include/asm/xor.h | 1 + arch/powerpc/mm/tlb_64.c | 2 +- arch/powerpc/platforms/86xx/mpc86xx_smp.c | 2 +- 264 files changed, 39505 insertions(+), 3 deletions(-) create mode 100644 arch/powerpc/include/asm/8253pit.h create mode 100644 arch/powerpc/include/asm/8xx_immap.h create mode 100644 arch/powerpc/include/asm/Kbuild create mode 100644 arch/powerpc/include/asm/a.out.h create mode 100644 arch/powerpc/include/asm/abs_addr.h create mode 100644 arch/powerpc/include/asm/agp.h create mode 100644 arch/powerpc/include/asm/asm-compat.h create mode 100644 arch/powerpc/include/asm/atomic.h create mode 100644 arch/powerpc/include/asm/auxvec.h create mode 100644 arch/powerpc/include/asm/backlight.h create mode 100644 arch/powerpc/include/asm/bitops.h create mode 100644 arch/powerpc/include/asm/bootx.h create mode 100644 arch/powerpc/include/asm/btext.h create mode 100644 arch/powerpc/include/asm/bug.h create mode 100644 arch/powerpc/include/asm/bugs.h create mode 100644 arch/powerpc/include/asm/byteorder.h create mode 100644 arch/powerpc/include/asm/cache.h create mode 100644 arch/powerpc/include/asm/cacheflush.h create mode 100644 arch/powerpc/include/asm/cell-pmu.h create mode 100644 arch/powerpc/include/asm/cell-regs.h create mode 100644 arch/powerpc/include/asm/checksum.h create mode 100644 arch/powerpc/include/asm/clk_interface.h create mode 100644 arch/powerpc/include/asm/code-patching.h create mode 100644 arch/powerpc/include/asm/compat.h create mode 100644 arch/powerpc/include/asm/cpm.h create mode 100644 arch/powerpc/include/asm/cpm1.h create mode 100644 arch/powerpc/include/asm/cpm2.h create mode 100644 arch/powerpc/include/asm/cputable.h create mode 100644 arch/powerpc/include/asm/cputhreads.h create mode 100644 arch/powerpc/include/asm/cputime.h create mode 100644 arch/powerpc/include/asm/current.h create mode 100644 arch/powerpc/include/asm/dbdma.h create mode 100644 arch/powerpc/include/asm/dcr-generic.h create mode 100644 arch/powerpc/include/asm/dcr-mmio.h create mode 100644 arch/powerpc/include/asm/dcr-native.h create mode 100644 arch/powerpc/include/asm/dcr-regs.h create mode 100644 arch/powerpc/include/asm/dcr.h create mode 100644 arch/powerpc/include/asm/delay.h create mode 100644 arch/powerpc/include/asm/device.h create mode 100644 arch/powerpc/include/asm/div64.h create mode 100644 arch/powerpc/include/asm/dma-mapping.h create mode 100644 arch/powerpc/include/asm/dma.h create mode 100644 arch/powerpc/include/asm/edac.h create mode 100644 arch/powerpc/include/asm/eeh.h create mode 100644 arch/powerpc/include/asm/eeh_event.h create mode 100644 arch/powerpc/include/asm/elf.h create mode 100644 arch/powerpc/include/asm/emergency-restart.h create mode 100644 arch/powerpc/include/asm/errno.h create mode 100644 arch/powerpc/include/asm/exception.h create mode 100644 arch/powerpc/include/asm/fb.h create mode 100644 arch/powerpc/include/asm/fcntl.h create mode 100644 arch/powerpc/include/asm/feature-fixups.h create mode 100644 arch/powerpc/include/asm/firmware.h create mode 100644 arch/powerpc/include/asm/fixmap.h create mode 100644 arch/powerpc/include/asm/floppy.h create mode 100644 arch/powerpc/include/asm/fs_pd.h create mode 100644 arch/powerpc/include/asm/fsl_gtm.h create mode 100644 arch/powerpc/include/asm/fsl_lbc.h create mode 100644 arch/powerpc/include/asm/ftrace.h create mode 100644 arch/powerpc/include/asm/futex.h create mode 100644 arch/powerpc/include/asm/gpio.h create mode 100644 arch/powerpc/include/asm/grackle.h create mode 100644 arch/powerpc/include/asm/hardirq.h create mode 100644 arch/powerpc/include/asm/heathrow.h create mode 100644 arch/powerpc/include/asm/highmem.h create mode 100644 arch/powerpc/include/asm/hugetlb.h create mode 100644 arch/powerpc/include/asm/hvcall.h create mode 100644 arch/powerpc/include/asm/hvconsole.h create mode 100644 arch/powerpc/include/asm/hvcserver.h create mode 100644 arch/powerpc/include/asm/hw_irq.h create mode 100644 arch/powerpc/include/asm/hydra.h create mode 100644 arch/powerpc/include/asm/i8259.h create mode 100644 arch/powerpc/include/asm/ibmebus.h create mode 100644 arch/powerpc/include/asm/ide.h create mode 100644 arch/powerpc/include/asm/immap_86xx.h create mode 100644 arch/powerpc/include/asm/immap_cpm2.h create mode 100644 arch/powerpc/include/asm/immap_qe.h create mode 100644 arch/powerpc/include/asm/io-defs.h create mode 100644 arch/powerpc/include/asm/io.h create mode 100644 arch/powerpc/include/asm/ioctl.h create mode 100644 arch/powerpc/include/asm/ioctls.h create mode 100644 arch/powerpc/include/asm/iommu.h create mode 100644 arch/powerpc/include/asm/ipcbuf.h create mode 100644 arch/powerpc/include/asm/ipic.h create mode 100644 arch/powerpc/include/asm/irq.h create mode 100644 arch/powerpc/include/asm/irq_regs.h create mode 100644 arch/powerpc/include/asm/irqflags.h create mode 100644 arch/powerpc/include/asm/iseries/alpaca.h create mode 100644 arch/powerpc/include/asm/iseries/hv_call.h create mode 100644 arch/powerpc/include/asm/iseries/hv_call_event.h create mode 100644 arch/powerpc/include/asm/iseries/hv_call_sc.h create mode 100644 arch/powerpc/include/asm/iseries/hv_call_xm.h create mode 100644 arch/powerpc/include/asm/iseries/hv_lp_config.h create mode 100644 arch/powerpc/include/asm/iseries/hv_lp_event.h create mode 100644 arch/powerpc/include/asm/iseries/hv_types.h create mode 100644 arch/powerpc/include/asm/iseries/iommu.h create mode 100644 arch/powerpc/include/asm/iseries/it_lp_queue.h create mode 100644 arch/powerpc/include/asm/iseries/lpar_map.h create mode 100644 arch/powerpc/include/asm/iseries/mf.h create mode 100644 arch/powerpc/include/asm/iseries/vio.h create mode 100644 arch/powerpc/include/asm/kdebug.h create mode 100644 arch/powerpc/include/asm/kdump.h create mode 100644 arch/powerpc/include/asm/kexec.h create mode 100644 arch/powerpc/include/asm/keylargo.h create mode 100644 arch/powerpc/include/asm/kgdb.h create mode 100644 arch/powerpc/include/asm/kmap_types.h create mode 100644 arch/powerpc/include/asm/kprobes.h create mode 100644 arch/powerpc/include/asm/kvm.h create mode 100644 arch/powerpc/include/asm/kvm_asm.h create mode 100644 arch/powerpc/include/asm/kvm_host.h create mode 100644 arch/powerpc/include/asm/kvm_para.h create mode 100644 arch/powerpc/include/asm/kvm_ppc.h create mode 100644 arch/powerpc/include/asm/libata-portmap.h create mode 100644 arch/powerpc/include/asm/linkage.h create mode 100644 arch/powerpc/include/asm/lmb.h create mode 100644 arch/powerpc/include/asm/local.h create mode 100644 arch/powerpc/include/asm/lppaca.h create mode 100644 arch/powerpc/include/asm/lv1call.h create mode 100644 arch/powerpc/include/asm/machdep.h create mode 100644 arch/powerpc/include/asm/macio.h create mode 100644 arch/powerpc/include/asm/mc146818rtc.h create mode 100644 arch/powerpc/include/asm/mediabay.h create mode 100644 arch/powerpc/include/asm/mman.h create mode 100644 arch/powerpc/include/asm/mmu-40x.h create mode 100644 arch/powerpc/include/asm/mmu-44x.h create mode 100644 arch/powerpc/include/asm/mmu-8xx.h create mode 100644 arch/powerpc/include/asm/mmu-fsl-booke.h create mode 100644 arch/powerpc/include/asm/mmu-hash32.h create mode 100644 arch/powerpc/include/asm/mmu-hash64.h create mode 100644 arch/powerpc/include/asm/mmu.h create mode 100644 arch/powerpc/include/asm/mmu_context.h create mode 100644 arch/powerpc/include/asm/mmzone.h create mode 100644 arch/powerpc/include/asm/module.h create mode 100644 arch/powerpc/include/asm/mpc512x.h create mode 100644 arch/powerpc/include/asm/mpc52xx.h create mode 100644 arch/powerpc/include/asm/mpc52xx_psc.h create mode 100644 arch/powerpc/include/asm/mpc6xx.h create mode 100644 arch/powerpc/include/asm/mpc8260.h create mode 100644 arch/powerpc/include/asm/mpc86xx.h create mode 100644 arch/powerpc/include/asm/mpc8xx.h create mode 100644 arch/powerpc/include/asm/mpic.h create mode 100644 arch/powerpc/include/asm/msgbuf.h create mode 100644 arch/powerpc/include/asm/mutex.h create mode 100644 arch/powerpc/include/asm/nvram.h create mode 100644 arch/powerpc/include/asm/of_device.h create mode 100644 arch/powerpc/include/asm/of_platform.h create mode 100644 arch/powerpc/include/asm/ohare.h create mode 100644 arch/powerpc/include/asm/oprofile_impl.h create mode 100644 arch/powerpc/include/asm/pSeries_reconfig.h create mode 100644 arch/powerpc/include/asm/paca.h create mode 100644 arch/powerpc/include/asm/page.h create mode 100644 arch/powerpc/include/asm/page_32.h create mode 100644 arch/powerpc/include/asm/page_64.h create mode 100644 arch/powerpc/include/asm/param.h create mode 100644 arch/powerpc/include/asm/parport.h create mode 100644 arch/powerpc/include/asm/pasemi_dma.h create mode 100644 arch/powerpc/include/asm/pci-bridge.h create mode 100644 arch/powerpc/include/asm/pci.h create mode 100644 arch/powerpc/include/asm/percpu.h create mode 100644 arch/powerpc/include/asm/pgalloc-32.h create mode 100644 arch/powerpc/include/asm/pgalloc-64.h create mode 100644 arch/powerpc/include/asm/pgalloc.h create mode 100644 arch/powerpc/include/asm/pgtable-4k.h create mode 100644 arch/powerpc/include/asm/pgtable-64k.h create mode 100644 arch/powerpc/include/asm/pgtable-ppc32.h create mode 100644 arch/powerpc/include/asm/pgtable-ppc64.h create mode 100644 arch/powerpc/include/asm/pgtable.h create mode 100644 arch/powerpc/include/asm/phyp_dump.h create mode 100644 arch/powerpc/include/asm/pmac_feature.h create mode 100644 arch/powerpc/include/asm/pmac_low_i2c.h create mode 100644 arch/powerpc/include/asm/pmac_pfunc.h create mode 100644 arch/powerpc/include/asm/pmc.h create mode 100644 arch/powerpc/include/asm/pmi.h create mode 100644 arch/powerpc/include/asm/poll.h create mode 100644 arch/powerpc/include/asm/posix_types.h create mode 100644 arch/powerpc/include/asm/ppc-pci.h create mode 100644 arch/powerpc/include/asm/ppc4xx.h create mode 100644 arch/powerpc/include/asm/ppc_asm.h create mode 100644 arch/powerpc/include/asm/processor.h create mode 100644 arch/powerpc/include/asm/prom.h create mode 100644 arch/powerpc/include/asm/ps3.h create mode 100644 arch/powerpc/include/asm/ps3av.h create mode 100644 arch/powerpc/include/asm/ps3fb.h create mode 100644 arch/powerpc/include/asm/ps3stor.h create mode 100644 arch/powerpc/include/asm/ptrace.h create mode 100644 arch/powerpc/include/asm/qe.h create mode 100644 arch/powerpc/include/asm/qe_ic.h create mode 100644 arch/powerpc/include/asm/reg.h create mode 100644 arch/powerpc/include/asm/reg_8xx.h create mode 100644 arch/powerpc/include/asm/reg_booke.h create mode 100644 arch/powerpc/include/asm/reg_fsl_emb.h create mode 100644 arch/powerpc/include/asm/resource.h create mode 100644 arch/powerpc/include/asm/rheap.h create mode 100644 arch/powerpc/include/asm/rio.h create mode 100644 arch/powerpc/include/asm/rtas.h create mode 100644 arch/powerpc/include/asm/rtc.h create mode 100644 arch/powerpc/include/asm/rwsem.h create mode 100644 arch/powerpc/include/asm/scatterlist.h create mode 100644 arch/powerpc/include/asm/seccomp.h create mode 100644 arch/powerpc/include/asm/sections.h create mode 100644 arch/powerpc/include/asm/sembuf.h create mode 100644 arch/powerpc/include/asm/serial.h create mode 100644 arch/powerpc/include/asm/setjmp.h create mode 100644 arch/powerpc/include/asm/setup.h create mode 100644 arch/powerpc/include/asm/shmbuf.h create mode 100644 arch/powerpc/include/asm/shmparam.h create mode 100644 arch/powerpc/include/asm/sigcontext.h create mode 100644 arch/powerpc/include/asm/siginfo.h create mode 100644 arch/powerpc/include/asm/signal.h create mode 100644 arch/powerpc/include/asm/smp.h create mode 100644 arch/powerpc/include/asm/smu.h create mode 100644 arch/powerpc/include/asm/socket.h create mode 100644 arch/powerpc/include/asm/sockios.h create mode 100644 arch/powerpc/include/asm/sparsemem.h create mode 100644 arch/powerpc/include/asm/spinlock.h create mode 100644 arch/powerpc/include/asm/spinlock_types.h create mode 100644 arch/powerpc/include/asm/spu.h create mode 100644 arch/powerpc/include/asm/spu_csa.h create mode 100644 arch/powerpc/include/asm/spu_info.h create mode 100644 arch/powerpc/include/asm/spu_priv1.h create mode 100644 arch/powerpc/include/asm/sstep.h create mode 100644 arch/powerpc/include/asm/stat.h create mode 100644 arch/powerpc/include/asm/statfs.h create mode 100644 arch/powerpc/include/asm/string.h create mode 100644 arch/powerpc/include/asm/suspend.h create mode 100644 arch/powerpc/include/asm/synch.h create mode 100644 arch/powerpc/include/asm/syscall.h create mode 100644 arch/powerpc/include/asm/syscalls.h create mode 100644 arch/powerpc/include/asm/systbl.h create mode 100644 arch/powerpc/include/asm/system.h create mode 100644 arch/powerpc/include/asm/tce.h create mode 100644 arch/powerpc/include/asm/termbits.h create mode 100644 arch/powerpc/include/asm/termios.h create mode 100644 arch/powerpc/include/asm/thread_info.h create mode 100644 arch/powerpc/include/asm/time.h create mode 100644 arch/powerpc/include/asm/timex.h create mode 100644 arch/powerpc/include/asm/tlb.h create mode 100644 arch/powerpc/include/asm/tlbflush.h create mode 100644 arch/powerpc/include/asm/topology.h create mode 100644 arch/powerpc/include/asm/tsi108.h create mode 100644 arch/powerpc/include/asm/tsi108_irq.h create mode 100644 arch/powerpc/include/asm/tsi108_pci.h create mode 100644 arch/powerpc/include/asm/types.h create mode 100644 arch/powerpc/include/asm/uaccess.h create mode 100644 arch/powerpc/include/asm/ucc.h create mode 100644 arch/powerpc/include/asm/ucc_fast.h create mode 100644 arch/powerpc/include/asm/ucc_slow.h create mode 100644 arch/powerpc/include/asm/ucontext.h create mode 100644 arch/powerpc/include/asm/udbg.h create mode 100644 arch/powerpc/include/asm/uic.h create mode 100644 arch/powerpc/include/asm/unaligned.h create mode 100644 arch/powerpc/include/asm/uninorth.h create mode 100644 arch/powerpc/include/asm/unistd.h create mode 100644 arch/powerpc/include/asm/user.h create mode 100644 arch/powerpc/include/asm/vdso.h create mode 100644 arch/powerpc/include/asm/vdso_datapage.h create mode 100644 arch/powerpc/include/asm/vga.h create mode 100644 arch/powerpc/include/asm/vio.h create mode 100644 arch/powerpc/include/asm/xilinx_intc.h create mode 100644 arch/powerpc/include/asm/xmon.h create mode 100644 arch/powerpc/include/asm/xor.h (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/io.h b/arch/powerpc/boot/io.h index ccaedaec50d..7c09f4861fe 100644 --- a/arch/powerpc/boot/io.h +++ b/arch/powerpc/boot/io.h @@ -6,7 +6,7 @@ /* * Low-level I/O routines. * - * Copied from (which has no copyright) + * Copied from (which has no copyright) */ static inline int in_8(const volatile unsigned char *addr) { diff --git a/arch/powerpc/include/asm/8253pit.h b/arch/powerpc/include/asm/8253pit.h new file mode 100644 index 00000000000..b70d6e53b30 --- /dev/null +++ b/arch/powerpc/include/asm/8253pit.h @@ -0,0 +1,10 @@ +#ifndef _ASM_POWERPC_8253PIT_H +#define _ASM_POWERPC_8253PIT_H + +/* + * 8253/8254 Programmable Interval Timer + */ + +#define PIT_TICK_RATE 1193182UL + +#endif /* _ASM_POWERPC_8253PIT_H */ diff --git a/arch/powerpc/include/asm/8xx_immap.h b/arch/powerpc/include/asm/8xx_immap.h new file mode 100644 index 00000000000..4b0e1520600 --- /dev/null +++ b/arch/powerpc/include/asm/8xx_immap.h @@ -0,0 +1,564 @@ +/* + * MPC8xx Internal Memory Map + * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) + * + * The I/O on the MPC860 is comprised of blocks of special registers + * and the dual port ram for the Communication Processor Module. + * Within this space are functional units such as the SIU, memory + * controller, system timers, and other control functions. It is + * a combination that I found difficult to separate into logical + * functional files.....but anyone else is welcome to try. -- Dan + */ +#ifdef __KERNEL__ +#ifndef __IMMAP_8XX__ +#define __IMMAP_8XX__ + +/* System configuration registers. +*/ +typedef struct sys_conf { + uint sc_siumcr; + uint sc_sypcr; + uint sc_swt; + char res1[2]; + ushort sc_swsr; + uint sc_sipend; + uint sc_simask; + uint sc_siel; + uint sc_sivec; + uint sc_tesr; + char res2[0xc]; + uint sc_sdcr; + char res3[0x4c]; +} sysconf8xx_t; + +/* PCMCIA configuration registers. +*/ +typedef struct pcmcia_conf { + uint pcmc_pbr0; + uint pcmc_por0; + uint pcmc_pbr1; + uint pcmc_por1; + uint pcmc_pbr2; + uint pcmc_por2; + uint pcmc_pbr3; + uint pcmc_por3; + uint pcmc_pbr4; + uint pcmc_por4; + uint pcmc_pbr5; + uint pcmc_por5; + uint pcmc_pbr6; + uint pcmc_por6; + uint pcmc_pbr7; + uint pcmc_por7; + char res1[0x20]; + uint pcmc_pgcra; + uint pcmc_pgcrb; + uint pcmc_pscr; + char res2[4]; + uint pcmc_pipr; + char res3[4]; + uint pcmc_per; + char res4[4]; +} pcmconf8xx_t; + +/* Memory controller registers. +*/ +typedef struct mem_ctlr { + uint memc_br0; + uint memc_or0; + uint memc_br1; + uint memc_or1; + uint memc_br2; + uint memc_or2; + uint memc_br3; + uint memc_or3; + uint memc_br4; + uint memc_or4; + uint memc_br5; + uint memc_or5; + uint memc_br6; + uint memc_or6; + uint memc_br7; + uint memc_or7; + char res1[0x24]; + uint memc_mar; + uint memc_mcr; + char res2[4]; + uint memc_mamr; + uint memc_mbmr; + ushort memc_mstat; + ushort memc_mptpr; + uint memc_mdr; + char res3[0x80]; +} memctl8xx_t; + +/*----------------------------------------------------------------------- + * BR - Memory Controler: Base Register 16-9 + */ +#define BR_BA_MSK 0xffff8000 /* Base Address Mask */ +#define BR_AT_MSK 0x00007000 /* Address Type Mask */ +#define BR_PS_MSK 0x00000c00 /* Port Size Mask */ +#define BR_PS_32 0x00000000 /* 32 bit port size */ +#define BR_PS_16 0x00000800 /* 16 bit port size */ +#define BR_PS_8 0x00000400 /* 8 bit port size */ +#define BR_PARE 0x00000200 /* Parity Enable */ +#define BR_WP 0x00000100 /* Write Protect */ +#define BR_MS_MSK 0x000000c0 /* Machine Select Mask */ +#define BR_MS_GPCM 0x00000000 /* G.P.C.M. Machine Select */ +#define BR_MS_UPMA 0x00000080 /* U.P.M.A Machine Select */ +#define BR_MS_UPMB 0x000000c0 /* U.P.M.B Machine Select */ +#define BR_V 0x00000001 /* Bank Valid */ + +/*----------------------------------------------------------------------- + * OR - Memory Controler: Option Register 16-11 + */ +#define OR_AM_MSK 0xffff8000 /* Address Mask Mask */ +#define OR_ATM_MSK 0x00007000 /* Address Type Mask Mask */ +#define OR_CSNT_SAM 0x00000800 /* Chip Select Negation Time/ Start */ + /* Address Multiplex */ +#define OR_ACS_MSK 0x00000600 /* Address to Chip Select Setup mask */ +#define OR_ACS_DIV1 0x00000000 /* CS is output at the same time */ +#define OR_ACS_DIV4 0x00000400 /* CS is output 1/4 a clock later */ +#define OR_ACS_DIV2 0x00000600 /* CS is output 1/2 a clock later */ +#define OR_G5LA 0x00000400 /* Output #GPL5 on #GPL_A5 */ +#define OR_G5LS 0x00000200 /* Drive #GPL high on falling edge of...*/ +#define OR_BI 0x00000100 /* Burst inhibit */ +#define OR_SCY_MSK 0x000000f0 /* Cycle Length in Clocks */ +#define OR_SCY_0_CLK 0x00000000 /* 0 clock cycles wait states */ +#define OR_SCY_1_CLK 0x00000010 /* 1 clock cycles wait states */ +#define OR_SCY_2_CLK 0x00000020 /* 2 clock cycles wait states */ +#define OR_SCY_3_CLK 0x00000030 /* 3 clock cycles wait states */ +#define OR_SCY_4_CLK 0x00000040 /* 4 clock cycles wait states */ +#define OR_SCY_5_CLK 0x00000050 /* 5 clock cycles wait states */ +#define OR_SCY_6_CLK 0x00000060 /* 6 clock cycles wait states */ +#define OR_SCY_7_CLK 0x00000070 /* 7 clock cycles wait states */ +#define OR_SCY_8_CLK 0x00000080 /* 8 clock cycles wait states */ +#define OR_SCY_9_CLK 0x00000090 /* 9 clock cycles wait states */ +#define OR_SCY_10_CLK 0x000000a0 /* 10 clock cycles wait states */ +#define OR_SCY_11_CLK 0x000000b0 /* 11 clock cycles wait states */ +#define OR_SCY_12_CLK 0x000000c0 /* 12 clock cycles wait states */ +#define OR_SCY_13_CLK 0x000000d0 /* 13 clock cycles wait states */ +#define OR_SCY_14_CLK 0x000000e0 /* 14 clock cycles wait states */ +#define OR_SCY_15_CLK 0x000000f0 /* 15 clock cycles wait states */ +#define OR_SETA 0x00000008 /* External Transfer Acknowledge */ +#define OR_TRLX 0x00000004 /* Timing Relaxed */ +#define OR_EHTR 0x00000002 /* Extended Hold Time on Read */ + +/* System Integration Timers. +*/ +typedef struct sys_int_timers { + ushort sit_tbscr; + char res0[0x02]; + uint sit_tbreff0; + uint sit_tbreff1; + char res1[0x14]; + ushort sit_rtcsc; + char res2[0x02]; + uint sit_rtc; + uint sit_rtsec; + uint sit_rtcal; + char res3[0x10]; + ushort sit_piscr; + char res4[2]; + uint sit_pitc; + uint sit_pitr; + char res5[0x34]; +} sit8xx_t; + +#define TBSCR_TBIRQ_MASK ((ushort)0xff00) +#define TBSCR_REFA ((ushort)0x0080) +#define TBSCR_REFB ((ushort)0x0040) +#define TBSCR_REFAE ((ushort)0x0008) +#define TBSCR_REFBE ((ushort)0x0004) +#define TBSCR_TBF ((ushort)0x0002) +#define TBSCR_TBE ((ushort)0x0001) + +#define RTCSC_RTCIRQ_MASK ((ushort)0xff00) +#define RTCSC_SEC ((ushort)0x0080) +#define RTCSC_ALR ((ushort)0x0040) +#define RTCSC_38K ((ushort)0x0010) +#define RTCSC_SIE ((ushort)0x0008) +#define RTCSC_ALE ((ushort)0x0004) +#define RTCSC_RTF ((ushort)0x0002) +#define RTCSC_RTE ((ushort)0x0001) + +#define PISCR_PIRQ_MASK ((ushort)0xff00) +#define PISCR_PS ((ushort)0x0080) +#define PISCR_PIE ((ushort)0x0004) +#define PISCR_PTF ((ushort)0x0002) +#define PISCR_PTE ((ushort)0x0001) + +/* Clocks and Reset. +*/ +typedef struct clk_and_reset { + uint car_sccr; + uint car_plprcr; + uint car_rsr; + char res[0x74]; /* Reserved area */ +} car8xx_t; + +/* System Integration Timers keys. +*/ +typedef struct sitk { + uint sitk_tbscrk; + uint sitk_tbreff0k; + uint sitk_tbreff1k; + uint sitk_tbk; + char res1[0x10]; + uint sitk_rtcsck; + uint sitk_rtck; + uint sitk_rtseck; + uint sitk_rtcalk; + char res2[0x10]; + uint sitk_piscrk; + uint sitk_pitck; + char res3[0x38]; +} sitk8xx_t; + +/* Clocks and reset keys. +*/ +typedef struct cark { + uint cark_sccrk; + uint cark_plprcrk; + uint cark_rsrk; + char res[0x474]; +} cark8xx_t; + +/* The key to unlock registers maintained by keep-alive power. +*/ +#define KAPWR_KEY ((unsigned int)0x55ccaa33) + +/* Video interface. MPC823 Only. +*/ +typedef struct vid823 { + ushort vid_vccr; + ushort res1; + u_char vid_vsr; + u_char res2; + u_char vid_vcmr; + u_char res3; + uint vid_vbcb; + uint res4; + uint vid_vfcr0; + uint vid_vfaa0; + uint vid_vfba0; + uint vid_vfcr1; + uint vid_vfaa1; + uint vid_vfba1; + u_char res5[0x18]; +} vid823_t; + +/* LCD interface. 823 Only. +*/ +typedef struct lcd { + uint lcd_lccr; + uint lcd_lchcr; + uint lcd_lcvcr; + char res1[4]; + uint lcd_lcfaa; + uint lcd_lcfba; + char lcd_lcsr; + char res2[0x7]; +} lcd823_t; + +/* I2C +*/ +typedef struct i2c { + u_char i2c_i2mod; + char res1[3]; + u_char i2c_i2add; + char res2[3]; + u_char i2c_i2brg; + char res3[3]; + u_char i2c_i2com; + char res4[3]; + u_char i2c_i2cer; + char res5[3]; + u_char i2c_i2cmr; + char res6[0x8b]; +} i2c8xx_t; + +/* DMA control/status registers. +*/ +typedef struct sdma_csr { + char res1[4]; + uint sdma_sdar; + u_char sdma_sdsr; + char res3[3]; + u_char sdma_sdmr; + char res4[3]; + u_char sdma_idsr1; + char res5[3]; + u_char sdma_idmr1; + char res6[3]; + u_char sdma_idsr2; + char res7[3]; + u_char sdma_idmr2; + char res8[0x13]; +} sdma8xx_t; + +/* Communication Processor Module Interrupt Controller. +*/ +typedef struct cpm_ic { + ushort cpic_civr; + char res[0xe]; + uint cpic_cicr; + uint cpic_cipr; + uint cpic_cimr; + uint cpic_cisr; +} cpic8xx_t; + +/* Input/Output Port control/status registers. +*/ +typedef struct io_port { + ushort iop_padir; + ushort iop_papar; + ushort iop_paodr; + ushort iop_padat; + char res1[8]; + ushort iop_pcdir; + ushort iop_pcpar; + ushort iop_pcso; + ushort iop_pcdat; + ushort iop_pcint; + char res2[6]; + ushort iop_pddir; + ushort iop_pdpar; + char res3[2]; + ushort iop_pddat; + uint utmode; + char res4[4]; +} iop8xx_t; + +/* Communication Processor Module Timers +*/ +typedef struct cpm_timers { + ushort cpmt_tgcr; + char res1[0xe]; + ushort cpmt_tmr1; + ushort cpmt_tmr2; + ushort cpmt_trr1; + ushort cpmt_trr2; + ushort cpmt_tcr1; + ushort cpmt_tcr2; + ushort cpmt_tcn1; + ushort cpmt_tcn2; + ushort cpmt_tmr3; + ushort cpmt_tmr4; + ushort cpmt_trr3; + ushort cpmt_trr4; + ushort cpmt_tcr3; + ushort cpmt_tcr4; + ushort cpmt_tcn3; + ushort cpmt_tcn4; + ushort cpmt_ter1; + ushort cpmt_ter2; + ushort cpmt_ter3; + ushort cpmt_ter4; + char res2[8]; +} cpmtimer8xx_t; + +/* Finally, the Communication Processor stuff..... +*/ +typedef struct scc { /* Serial communication channels */ + uint scc_gsmrl; + uint scc_gsmrh; + ushort scc_psmr; + char res1[2]; + ushort scc_todr; + ushort scc_dsr; + ushort scc_scce; + char res2[2]; + ushort scc_sccm; + char res3; + u_char scc_sccs; + char res4[8]; +} scc_t; + +typedef struct smc { /* Serial management channels */ + char res1[2]; + ushort smc_smcmr; + char res2[2]; + u_char smc_smce; + char res3[3]; + u_char smc_smcm; + char res4[5]; +} smc_t; + +/* MPC860T Fast Ethernet Controller. It isn't part of the CPM, but + * it fits within the address space. + */ + +typedef struct fec { + uint fec_addr_low; /* lower 32 bits of station address */ + ushort fec_addr_high; /* upper 16 bits of station address */ + ushort res1; /* reserved */ + uint fec_hash_table_high; /* upper 32-bits of hash table */ + uint fec_hash_table_low; /* lower 32-bits of hash table */ + uint fec_r_des_start; /* beginning of Rx descriptor ring */ + uint fec_x_des_start; /* beginning of Tx descriptor ring */ + uint fec_r_buff_size; /* Rx buffer size */ + uint res2[9]; /* reserved */ + uint fec_ecntrl; /* ethernet control register */ + uint fec_ievent; /* interrupt event register */ + uint fec_imask; /* interrupt mask register */ + uint fec_ivec; /* interrupt level and vector status */ + uint fec_r_des_active; /* Rx ring updated flag */ + uint fec_x_des_active; /* Tx ring updated flag */ + uint res3[10]; /* reserved */ + uint fec_mii_data; /* MII data register */ + uint fec_mii_speed; /* MII speed control register */ + uint res4[17]; /* reserved */ + uint fec_r_bound; /* end of RAM (read-only) */ + uint fec_r_fstart; /* Rx FIFO start address */ + uint res5[6]; /* reserved */ + uint fec_x_fstart; /* Tx FIFO start address */ + uint res6[17]; /* reserved */ + uint fec_fun_code; /* fec SDMA function code */ + uint res7[3]; /* reserved */ + uint fec_r_cntrl; /* Rx control register */ + uint fec_r_hash; /* Rx hash register */ + uint res8[14]; /* reserved */ + uint fec_x_cntrl; /* Tx control register */ + uint res9[0x1e]; /* reserved */ +} fec_t; + +/* The FEC and LCD color map share the same address space.... + * I guess we will never see an 823T :-). + */ +union fec_lcd { + fec_t fl_un_fec; + u_char fl_un_cmap[0x200]; +}; + +typedef struct comm_proc { + /* General control and status registers. + */ + ushort cp_cpcr; + u_char res1[2]; + ushort cp_rccr; + u_char res2; + u_char cp_rmds; + u_char res3[4]; + ushort cp_cpmcr1; + ushort cp_cpmcr2; + ushort cp_cpmcr3; + ushort cp_cpmcr4; + u_char res4[2]; + ushort cp_rter; + u_char res5[2]; + ushort cp_rtmr; + u_char res6[0x14]; + + /* Baud rate generators. + */ + uint cp_brgc1; + uint cp_brgc2; + uint cp_brgc3; + uint cp_brgc4; + + /* Serial Communication Channels. + */ + scc_t cp_scc[4]; + + /* Serial Management Channels. + */ + smc_t cp_smc[2]; + + /* Serial Peripheral Interface. + */ + ushort cp_spmode; + u_char res7[4]; + u_char cp_spie; + u_char res8[3]; + u_char cp_spim; + u_char res9[2]; + u_char cp_spcom; + u_char res10[2]; + + /* Parallel Interface Port. + */ + u_char res11[2]; + ushort cp_pipc; + u_char res12[2]; + ushort cp_ptpr; + uint cp_pbdir; + uint cp_pbpar; + u_char res13[2]; + ushort cp_pbodr; + uint cp_pbdat; + + /* Port E - MPC87x/88x only. + */ + uint cp_pedir; + uint cp_pepar; + uint cp_peso; + uint cp_peodr; + uint cp_pedat; + + /* Communications Processor Timing Register - + Contains RMII Timing for the FECs on MPC87x/88x only. + */ + uint cp_cptr; + + /* Serial Interface and Time Slot Assignment. + */ + uint cp_simode; + u_char cp_sigmr; + u_char res15; + u_char cp_sistr; + u_char cp_sicmr; + u_char res16[4]; + uint cp_sicr; + uint cp_sirp; + u_char res17[0xc]; + + /* 256 bytes of MPC823 video controller RAM array. + */ + u_char cp_vcram[0x100]; + u_char cp_siram[0x200]; + + /* The fast ethernet controller is not really part of the CPM, + * but it resides in the address space. + * The LCD color map is also here. + */ + union fec_lcd fl_un; +#define cp_fec fl_un.fl_un_fec +#define lcd_cmap fl_un.fl_un_cmap + char res18[0xE00]; + + /* The DUET family has a second FEC here */ + fec_t cp_fec2; +#define cp_fec1 cp_fec /* consistency macro */ + + /* Dual Ported RAM follows. + * There are many different formats for this memory area + * depending upon the devices used and options chosen. + * Some processors don't have all of it populated. + */ + u_char cp_dpmem[0x1C00]; /* BD / Data / ucode */ + u_char cp_dparam[0x400]; /* Parameter RAM */ +} cpm8xx_t; + +/* Internal memory map. +*/ +typedef struct immap { + sysconf8xx_t im_siu_conf; /* SIU Configuration */ + pcmconf8xx_t im_pcmcia; /* PCMCIA Configuration */ + memctl8xx_t im_memctl; /* Memory Controller */ + sit8xx_t im_sit; /* System integration timers */ + car8xx_t im_clkrst; /* Clocks and reset */ + sitk8xx_t im_sitk; /* Sys int timer keys */ + cark8xx_t im_clkrstk; /* Clocks and reset keys */ + vid823_t im_vid; /* Video (823 only) */ + lcd823_t im_lcd; /* LCD (823 only) */ + i2c8xx_t im_i2c; /* I2C control/status */ + sdma8xx_t im_sdma; /* SDMA control/status */ + cpic8xx_t im_cpic; /* CPM Interrupt Controller */ + iop8xx_t im_ioport; /* IO Port control/status */ + cpmtimer8xx_t im_cpmtimer; /* CPM timers */ + cpm8xx_t im_cpm; /* Communication processor */ +} immap_t; + +#endif /* __IMMAP_8XX__ */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/Kbuild b/arch/powerpc/include/asm/Kbuild new file mode 100644 index 00000000000..5ab7d7fe198 --- /dev/null +++ b/arch/powerpc/include/asm/Kbuild @@ -0,0 +1,37 @@ +include include/asm-generic/Kbuild.asm + +header-y += auxvec.h +header-y += ioctls.h +header-y += sembuf.h +header-y += siginfo.h +header-y += stat.h +header-y += errno.h +header-y += ipcbuf.h +header-y += msgbuf.h +header-y += shmbuf.h +header-y += socket.h +header-y += termbits.h +header-y += fcntl.h +header-y += poll.h +header-y += sockios.h +header-y += ucontext.h +header-y += ioctl.h +header-y += linkage.h +header-y += resource.h +header-y += sigcontext.h +header-y += statfs.h +header-y += ps3fb.h + +unifdef-y += bootx.h +unifdef-y += byteorder.h +unifdef-y += cputable.h +unifdef-y += elf.h +unifdef-y += nvram.h +unifdef-y += param.h +unifdef-y += posix_types.h +unifdef-y += seccomp.h +unifdef-y += signal.h +unifdef-y += spu_info.h +unifdef-y += termios.h +unifdef-y += types.h +unifdef-y += unistd.h diff --git a/arch/powerpc/include/asm/a.out.h b/arch/powerpc/include/asm/a.out.h new file mode 100644 index 00000000000..89cead6b176 --- /dev/null +++ b/arch/powerpc/include/asm/a.out.h @@ -0,0 +1,20 @@ +#ifndef _ASM_POWERPC_A_OUT_H +#define _ASM_POWERPC_A_OUT_H + +struct exec +{ + unsigned long a_info; /* Use macros N_MAGIC, etc for access */ + unsigned a_text; /* length of text, in bytes */ + unsigned a_data; /* length of data, in bytes */ + unsigned a_bss; /* length of uninitialized data area for file, in bytes */ + unsigned a_syms; /* length of symbol table data in file, in bytes */ + unsigned a_entry; /* start address */ + unsigned a_trsize; /* length of relocation info for text, in bytes */ + unsigned a_drsize; /* length of relocation info for data, in bytes */ +}; + +#define N_TRSIZE(a) ((a).a_trsize) +#define N_DRSIZE(a) ((a).a_drsize) +#define N_SYMSIZE(a) ((a).a_syms) + +#endif /* _ASM_POWERPC_A_OUT_H */ diff --git a/arch/powerpc/include/asm/abs_addr.h b/arch/powerpc/include/asm/abs_addr.h new file mode 100644 index 00000000000..98324c5a828 --- /dev/null +++ b/arch/powerpc/include/asm/abs_addr.h @@ -0,0 +1,75 @@ +#ifndef _ASM_POWERPC_ABS_ADDR_H +#define _ASM_POWERPC_ABS_ADDR_H +#ifdef __KERNEL__ + + +/* + * c 2001 PPC 64 Team, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include + +#include +#include +#include +#include + +struct mschunks_map { + unsigned long num_chunks; + unsigned long chunk_size; + unsigned long chunk_shift; + unsigned long chunk_mask; + u32 *mapping; +}; + +extern struct mschunks_map mschunks_map; + +/* Chunks are 256 KB */ +#define MSCHUNKS_CHUNK_SHIFT (18) +#define MSCHUNKS_CHUNK_SIZE (1UL << MSCHUNKS_CHUNK_SHIFT) +#define MSCHUNKS_OFFSET_MASK (MSCHUNKS_CHUNK_SIZE - 1) + +static inline unsigned long chunk_to_addr(unsigned long chunk) +{ + return chunk << MSCHUNKS_CHUNK_SHIFT; +} + +static inline unsigned long addr_to_chunk(unsigned long addr) +{ + return addr >> MSCHUNKS_CHUNK_SHIFT; +} + +static inline unsigned long phys_to_abs(unsigned long pa) +{ + unsigned long chunk; + + /* This is a no-op on non-iSeries */ + if (!firmware_has_feature(FW_FEATURE_ISERIES)) + return pa; + + chunk = addr_to_chunk(pa); + + if (chunk < mschunks_map.num_chunks) + chunk = mschunks_map.mapping[chunk]; + + return chunk_to_addr(chunk) + (pa & MSCHUNKS_OFFSET_MASK); +} + +/* Convenience macros */ +#define virt_to_abs(va) phys_to_abs(__pa(va)) +#define abs_to_virt(aa) __va(aa) + +/* + * Converts Virtual Address to Real Address for + * Legacy iSeries Hypervisor calls + */ +#define iseries_hv_addr(virtaddr) \ + (0x8000000000000000 | virt_to_abs(virtaddr)) + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_ABS_ADDR_H */ diff --git a/arch/powerpc/include/asm/agp.h b/arch/powerpc/include/asm/agp.h new file mode 100644 index 00000000000..86455c4c31e --- /dev/null +++ b/arch/powerpc/include/asm/agp.h @@ -0,0 +1,22 @@ +#ifndef _ASM_POWERPC_AGP_H +#define _ASM_POWERPC_AGP_H +#ifdef __KERNEL__ + +#include + +#define map_page_into_agp(page) +#define unmap_page_from_agp(page) +#define flush_agp_cache() mb() + +/* Convert a physical address to an address suitable for the GART. */ +#define phys_to_gart(x) (x) +#define gart_to_phys(x) (x) + +/* GATT allocation. Returns/accepts GATT kernel virtual address. */ +#define alloc_gatt_pages(order) \ + ((char *)__get_free_pages(GFP_KERNEL, (order))) +#define free_gatt_pages(table, order) \ + free_pages((unsigned long)(table), (order)) + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_AGP_H */ diff --git a/arch/powerpc/include/asm/asm-compat.h b/arch/powerpc/include/asm/asm-compat.h new file mode 100644 index 00000000000..8f0fe797194 --- /dev/null +++ b/arch/powerpc/include/asm/asm-compat.h @@ -0,0 +1,69 @@ +#ifndef _ASM_POWERPC_ASM_COMPAT_H +#define _ASM_POWERPC_ASM_COMPAT_H + +#include + +#ifdef __ASSEMBLY__ +# define stringify_in_c(...) __VA_ARGS__ +# define ASM_CONST(x) x +#else +/* This version of stringify will deal with commas... */ +# define __stringify_in_c(...) #__VA_ARGS__ +# define stringify_in_c(...) __stringify_in_c(__VA_ARGS__) " " +# define __ASM_CONST(x) x##UL +# define ASM_CONST(x) __ASM_CONST(x) +#endif + + +#ifdef __powerpc64__ + +/* operations for longs and pointers */ +#define PPC_LL stringify_in_c(ld) +#define PPC_STL stringify_in_c(std) +#define PPC_LCMPI stringify_in_c(cmpdi) +#define PPC_LONG stringify_in_c(.llong) +#define PPC_LONG_ALIGN stringify_in_c(.balign 8) +#define PPC_TLNEI stringify_in_c(tdnei) +#define PPC_LLARX stringify_in_c(ldarx) +#define PPC_STLCX stringify_in_c(stdcx.) +#define PPC_CNTLZL stringify_in_c(cntlzd) + +/* Move to CR, single-entry optimized version. Only available + * on POWER4 and later. + */ +#ifdef CONFIG_POWER4_ONLY +#define PPC_MTOCRF stringify_in_c(mtocrf) +#else +#define PPC_MTOCRF stringify_in_c(mtcrf) +#endif + +#else /* 32-bit */ + +/* operations for longs and pointers */ +#define PPC_LL stringify_in_c(lwz) +#define PPC_STL stringify_in_c(stw) +#define PPC_LCMPI stringify_in_c(cmpwi) +#define PPC_LONG stringify_in_c(.long) +#define PPC_LONG_ALIGN stringify_in_c(.balign 4) +#define PPC_TLNEI stringify_in_c(twnei) +#define PPC_LLARX stringify_in_c(lwarx) +#define PPC_STLCX stringify_in_c(stwcx.) +#define PPC_CNTLZL stringify_in_c(cntlzw) +#define PPC_MTOCRF stringify_in_c(mtcrf) + +#endif + +#ifdef __KERNEL__ +#ifdef CONFIG_IBM405_ERR77 +/* Erratum #77 on the 405 means we need a sync or dcbt before every + * stwcx. The old ATOMIC_SYNC_FIX covered some but not all of this. + */ +#define PPC405_ERR77(ra,rb) stringify_in_c(dcbt ra, rb;) +#define PPC405_ERR77_SYNC stringify_in_c(sync;) +#else +#define PPC405_ERR77(ra,rb) +#define PPC405_ERR77_SYNC +#endif +#endif + +#endif /* _ASM_POWERPC_ASM_COMPAT_H */ diff --git a/arch/powerpc/include/asm/atomic.h b/arch/powerpc/include/asm/atomic.h new file mode 100644 index 00000000000..f3fc733758f --- /dev/null +++ b/arch/powerpc/include/asm/atomic.h @@ -0,0 +1,479 @@ +#ifndef _ASM_POWERPC_ATOMIC_H_ +#define _ASM_POWERPC_ATOMIC_H_ + +/* + * PowerPC atomic operations + */ + +typedef struct { int counter; } atomic_t; + +#ifdef __KERNEL__ +#include +#include +#include +#include + +#define ATOMIC_INIT(i) { (i) } + +static __inline__ int atomic_read(const atomic_t *v) +{ + int t; + + __asm__ __volatile__("lwz%U1%X1 %0,%1" : "=r"(t) : "m"(v->counter)); + + return t; +} + +static __inline__ void atomic_set(atomic_t *v, int i) +{ + __asm__ __volatile__("stw%U0%X0 %1,%0" : "=m"(v->counter) : "r"(i)); +} + +static __inline__ void atomic_add(int a, atomic_t *v) +{ + int t; + + __asm__ __volatile__( +"1: lwarx %0,0,%3 # atomic_add\n\ + add %0,%2,%0\n" + PPC405_ERR77(0,%3) +" stwcx. %0,0,%3 \n\ + bne- 1b" + : "=&r" (t), "+m" (v->counter) + : "r" (a), "r" (&v->counter) + : "cc"); +} + +static __inline__ int atomic_add_return(int a, atomic_t *v) +{ + int t; + + __asm__ __volatile__( + LWSYNC_ON_SMP +"1: lwarx %0,0,%2 # atomic_add_return\n\ + add %0,%1,%0\n" + PPC405_ERR77(0,%2) +" stwcx. %0,0,%2 \n\ + bne- 1b" + ISYNC_ON_SMP + : "=&r" (t) + : "r" (a), "r" (&v->counter) + : "cc", "memory"); + + return t; +} + +#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) + +static __inline__ void atomic_sub(int a, atomic_t *v) +{ + int t; + + __asm__ __volatile__( +"1: lwarx %0,0,%3 # atomic_sub\n\ + subf %0,%2,%0\n" + PPC405_ERR77(0,%3) +" stwcx. %0,0,%3 \n\ + bne- 1b" + : "=&r" (t), "+m" (v->counter) + : "r" (a), "r" (&v->counter) + : "cc"); +} + +static __inline__ int atomic_sub_return(int a, atomic_t *v) +{ + int t; + + __asm__ __volatile__( + LWSYNC_ON_SMP +"1: lwarx %0,0,%2 # atomic_sub_return\n\ + subf %0,%1,%0\n" + PPC405_ERR77(0,%2) +" stwcx. %0,0,%2 \n\ + bne- 1b" + ISYNC_ON_SMP + : "=&r" (t) + : "r" (a), "r" (&v->counter) + : "cc", "memory"); + + return t; +} + +static __inline__ void atomic_inc(atomic_t *v) +{ + int t; + + __asm__ __volatile__( +"1: lwarx %0,0,%2 # atomic_inc\n\ + addic %0,%0,1\n" + PPC405_ERR77(0,%2) +" stwcx. %0,0,%2 \n\ + bne- 1b" + : "=&r" (t), "+m" (v->counter) + : "r" (&v->counter) + : "cc"); +} + +static __inline__ int atomic_inc_return(atomic_t *v) +{ + int t; + + __asm__ __volatile__( + LWSYNC_ON_SMP +"1: lwarx %0,0,%1 # atomic_inc_return\n\ + addic %0,%0,1\n" + PPC405_ERR77(0,%1) +" stwcx. %0,0,%1 \n\ + bne- 1b" + ISYNC_ON_SMP + : "=&r" (t) + : "r" (&v->counter) + : "cc", "memory"); + + return t; +} + +/* + * atomic_inc_and_test - increment and test + * @v: pointer of type atomic_t + * + * Atomically increments @v by 1 + * and returns true if the result is zero, or false for all + * other cases. + */ +#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0) + +static __inline__ void atomic_dec(atomic_t *v) +{ + int t; + + __asm__ __volatile__( +"1: lwarx %0,0,%2 # atomic_dec\n\ + addic %0,%0,-1\n" + PPC405_ERR77(0,%2)\ +" stwcx. %0,0,%2\n\ + bne- 1b" + : "=&r" (t), "+m" (v->counter) + : "r" (&v->counter) + : "cc"); +} + +static __inline__ int atomic_dec_return(atomic_t *v) +{ + int t; + + __asm__ __volatile__( + LWSYNC_ON_SMP +"1: lwarx %0,0,%1 # atomic_dec_return\n\ + addic %0,%0,-1\n" + PPC405_ERR77(0,%1) +" stwcx. %0,0,%1\n\ + bne- 1b" + ISYNC_ON_SMP + : "=&r" (t) + : "r" (&v->counter) + : "cc", "memory"); + + return t; +} + +#define atomic_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n))) +#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) + +/** + * atomic_add_unless - add unless the number is a given value + * @v: pointer of type atomic_t + * @a: the amount to add to v... + * @u: ...unless v is equal to u. + * + * Atomically adds @a to @v, so long as it was not @u. + * Returns non-zero if @v was not @u, and zero otherwise. + */ +static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) +{ + int t; + + __asm__ __volatile__ ( + LWSYNC_ON_SMP +"1: lwarx %0,0,%1 # atomic_add_unless\n\ + cmpw 0,%0,%3 \n\ + beq- 2f \n\ + add %0,%2,%0 \n" + PPC405_ERR77(0,%2) +" stwcx. %0,0,%1 \n\ + bne- 1b \n" + ISYNC_ON_SMP +" subf %0,%2,%0 \n\ +2:" + : "=&r" (t) + : "r" (&v->counter), "r" (a), "r" (u) + : "cc", "memory"); + + return t != u; +} + +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + +#define atomic_sub_and_test(a, v) (atomic_sub_return((a), (v)) == 0) +#define atomic_dec_and_test(v) (atomic_dec_return((v)) == 0) + +/* + * Atomically test *v and decrement if it is greater than 0. + * The function returns the old value of *v minus 1, even if + * the atomic variable, v, was not decremented. + */ +static __inline__ int atomic_dec_if_positive(atomic_t *v) +{ + int t; + + __asm__ __volatile__( + LWSYNC_ON_SMP +"1: lwarx %0,0,%1 # atomic_dec_if_positive\n\ + cmpwi %0,1\n\ + addi %0,%0,-1\n\ + blt- 2f\n" + PPC405_ERR77(0,%1) +" stwcx. %0,0,%1\n\ + bne- 1b" + ISYNC_ON_SMP + "\n\ +2:" : "=&b" (t) + : "r" (&v->counter) + : "cc", "memory"); + + return t; +} + +#define smp_mb__before_atomic_dec() smp_mb() +#define smp_mb__after_atomic_dec() smp_mb() +#define smp_mb__before_atomic_inc() smp_mb() +#define smp_mb__after_atomic_inc() smp_mb() + +#ifdef __powerpc64__ + +typedef struct { long counter; } atomic64_t; + +#define ATOMIC64_INIT(i) { (i) } + +static __inline__ long atomic64_read(const atomic64_t *v) +{ + long t; + + __asm__ __volatile__("ld%U1%X1 %0,%1" : "=r"(t) : "m"(v->counter)); + + return t; +} + +static __inline__ void atomic64_set(atomic64_t *v, long i) +{ + __asm__ __volatile__("std%U0%X0 %1,%0" : "=m"(v->counter) : "r"(i)); +} + +static __inline__ void atomic64_add(long a, atomic64_t *v) +{ + long t; + + __asm__ __volatile__( +"1: ldarx %0,0,%3 # atomic64_add\n\ + add %0,%2,%0\n\ + stdcx. %0,0,%3 \n\ + bne- 1b" + : "=&r" (t), "+m" (v->counter) + : "r" (a), "r" (&v->counter) + : "cc"); +} + +static __inline__ long atomic64_add_return(long a, atomic64_t *v) +{ + long t; + + __asm__ __volatile__( + LWSYNC_ON_SMP +"1: ldarx %0,0,%2 # atomic64_add_return\n\ + add %0,%1,%0\n\ + stdcx. %0,0,%2 \n\ + bne- 1b" + ISYNC_ON_SMP + : "=&r" (t) + : "r" (a), "r" (&v->counter) + : "cc", "memory"); + + return t; +} + +#define atomic64_add_negative(a, v) (atomic64_add_return((a), (v)) < 0) + +static __inline__ void atomic64_sub(long a, atomic64_t *v) +{ + long t; + + __asm__ __volatile__( +"1: ldarx %0,0,%3 # atomic64_sub\n\ + subf %0,%2,%0\n\ + stdcx. %0,0,%3 \n\ + bne- 1b" + : "=&r" (t), "+m" (v->counter) + : "r" (a), "r" (&v->counter) + : "cc"); +} + +static __inline__ long atomic64_sub_return(long a, atomic64_t *v) +{ + long t; + + __asm__ __volatile__( + LWSYNC_ON_SMP +"1: ldarx %0,0,%2 # atomic64_sub_return\n\ + subf %0,%1,%0\n\ + stdcx. %0,0,%2 \n\ + bne- 1b" + ISYNC_ON_SMP + : "=&r" (t) + : "r" (a), "r" (&v->counter) + : "cc", "memory"); + + return t; +} + +static __inline__ void atomic64_inc(atomic64_t *v) +{ + long t; + + __asm__ __volatile__( +"1: ldarx %0,0,%2 # atomic64_inc\n\ + addic %0,%0,1\n\ + stdcx. %0,0,%2 \n\ + bne- 1b" + : "=&r" (t), "+m" (v->counter) + : "r" (&v->counter) + : "cc"); +} + +static __inline__ long atomic64_inc_return(atomic64_t *v) +{ + long t; + + __asm__ __volatile__( + LWSYNC_ON_SMP +"1: ldarx %0,0,%1 # atomic64_inc_return\n\ + addic %0,%0,1\n\ + stdcx. %0,0,%1 \n\ + bne- 1b" + ISYNC_ON_SMP + : "=&r" (t) + : "r" (&v->counter) + : "cc", "memory"); + + return t; +} + +/* + * atomic64_inc_and_test - increment and test + * @v: pointer of type atomic64_t + * + * Atomically increments @v by 1 + * and returns true if the result is zero, or false for all + * other cases. + */ +#define atomic64_inc_and_test(v) (atomic64_inc_return(v) == 0) + +static __inline__ void atomic64_dec(atomic64_t *v) +{ + long t; + + __asm__ __volatile__( +"1: ldarx %0,0,%2 # atomic64_dec\n\ + addic %0,%0,-1\n\ + stdcx. %0,0,%2\n\ + bne- 1b" + : "=&r" (t), "+m" (v->counter) + : "r" (&v->counter) + : "cc"); +} + +static __inline__ long atomic64_dec_return(atomic64_t *v) +{ + long t; + + __asm__ __volatile__( + LWSYNC_ON_SMP +"1: ldarx %0,0,%1 # atomic64_dec_return\n\ + addic %0,%0,-1\n\ + stdcx. %0,0,%1\n\ + bne- 1b" + ISYNC_ON_SMP + : "=&r" (t) + : "r" (&v->counter) + : "cc", "memory"); + + return t; +} + +#define atomic64_sub_and_test(a, v) (atomic64_sub_return((a), (v)) == 0) +#define atomic64_dec_and_test(v) (atomic64_dec_return((v)) == 0) + +/* + * Atomically test *v and decrement if it is greater than 0. + * The function returns the old value of *v minus 1. + */ +static __inline__ long atomic64_dec_if_positive(atomic64_t *v) +{ + long t; + + __asm__ __volatile__( + LWSYNC_ON_SMP +"1: ldarx %0,0,%1 # atomic64_dec_if_positive\n\ + addic. %0,%0,-1\n\ + blt- 2f\n\ + stdcx. %0,0,%1\n\ + bne- 1b" + ISYNC_ON_SMP + "\n\ +2:" : "=&r" (t) + : "r" (&v->counter) + : "cc", "memory"); + + return t; +} + +#define atomic64_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n))) +#define atomic64_xchg(v, new) (xchg(&((v)->counter), new)) + +/** + * atomic64_add_unless - add unless the number is a given value + * @v: pointer of type atomic64_t + * @a: the amount to add to v... + * @u: ...unless v is equal to u. + * + * Atomically adds @a to @v, so long as it was not @u. + * Returns non-zero if @v was not @u, and zero otherwise. + */ +static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u) +{ + long t; + + __asm__ __volatile__ ( + LWSYNC_ON_SMP +"1: ldarx %0,0,%1 # atomic_add_unless\n\ + cmpd 0,%0,%3 \n\ + beq- 2f \n\ + add %0,%2,%0 \n" +" stdcx. %0,0,%1 \n\ + bne- 1b \n" + ISYNC_ON_SMP +" subf %0,%2,%0 \n\ +2:" + : "=&r" (t) + : "r" (&v->counter), "r" (a), "r" (u) + : "cc", "memory"); + + return t != u; +} + +#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0) + +#endif /* __powerpc64__ */ + +#include +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_ATOMIC_H_ */ diff --git a/arch/powerpc/include/asm/auxvec.h b/arch/powerpc/include/asm/auxvec.h new file mode 100644 index 00000000000..19a099b62cd --- /dev/null +++ b/arch/powerpc/include/asm/auxvec.h @@ -0,0 +1,19 @@ +#ifndef _ASM_POWERPC_AUXVEC_H +#define _ASM_POWERPC_AUXVEC_H + +/* + * We need to put in some extra aux table entries to tell glibc what + * the cache block size is, so it can use the dcbz instruction safely. + */ +#define AT_DCACHEBSIZE 19 +#define AT_ICACHEBSIZE 20 +#define AT_UCACHEBSIZE 21 +/* A special ignored type value for PPC, for glibc compatibility. */ +#define AT_IGNOREPPC 22 + +/* The vDSO location. We have to use the same value as x86 for glibc's + * sake :-) + */ +#define AT_SYSINFO_EHDR 33 + +#endif diff --git a/arch/powerpc/include/asm/backlight.h b/arch/powerpc/include/asm/backlight.h new file mode 100644 index 00000000000..8cf5c37c381 --- /dev/null +++ b/arch/powerpc/include/asm/backlight.h @@ -0,0 +1,41 @@ +/* + * Routines for handling backlight control on PowerBooks + * + * For now, implementation resides in + * arch/powerpc/platforms/powermac/backlight.c + * + */ +#ifndef __ASM_POWERPC_BACKLIGHT_H +#define __ASM_POWERPC_BACKLIGHT_H +#ifdef __KERNEL__ + +#include +#include + +/* For locking instructions, see the implementation file */ +extern struct backlight_device *pmac_backlight; +extern struct mutex pmac_backlight_mutex; + +extern int pmac_backlight_curve_lookup(struct fb_info *info, int value); + +extern int pmac_has_backlight_type(const char *type); + +extern void pmac_backlight_key(int direction); +static inline void pmac_backlight_key_up(void) +{ + pmac_backlight_key(0); +} +static inline void pmac_backlight_key_down(void) +{ + pmac_backlight_key(1); +} + +extern void pmac_backlight_set_legacy_brightness_pmu(int brightness); +extern int pmac_backlight_set_legacy_brightness(int brightness); +extern int pmac_backlight_get_legacy_brightness(void); + +extern void pmac_backlight_enable(void); +extern void pmac_backlight_disable(void); + +#endif /* __KERNEL__ */ +#endif diff --git a/arch/powerpc/include/asm/bitops.h b/arch/powerpc/include/asm/bitops.h new file mode 100644 index 00000000000..897eade3afb --- /dev/null +++ b/arch/powerpc/include/asm/bitops.h @@ -0,0 +1,410 @@ +/* + * PowerPC atomic bit operations. + * + * Merged version by David Gibson . + * Based on ppc64 versions by: Dave Engebretsen, Todd Inglett, Don + * Reed, Pat McCarthy, Peter Bergner, Anton Blanchard. They + * originally took it from the ppc32 code. + * + * Within a word, bits are numbered LSB first. Lot's of places make + * this assumption by directly testing bits with (val & (1< 1 word) bitmaps on a + * big-endian system because, unlike little endian, the number of each + * bit depends on the word size. + * + * The bitop functions are defined to work on unsigned longs, so for a + * ppc64 system the bits end up numbered: + * |63..............0|127............64|191...........128|255...........196| + * and on ppc32: + * |31.....0|63....31|95....64|127...96|159..128|191..160|223..192|255..224| + * + * There are a few little-endian macros used mostly for filesystem + * bitmaps, these work on similar bit arrays layouts, but + * byte-oriented: + * |7...0|15...8|23...16|31...24|39...32|47...40|55...48|63...56| + * + * The main difference is that bit 3-5 (64b) or 3-4 (32b) in the bit + * number field needs to be reversed compared to the big-endian bit + * fields. This can be achieved by XOR with 0x38 (64b) or 0x18 (32b). + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_POWERPC_BITOPS_H +#define _ASM_POWERPC_BITOPS_H + +#ifdef __KERNEL__ + +#ifndef _LINUX_BITOPS_H +#error only can be included directly +#endif + +#include +#include +#include + +/* + * clear_bit doesn't imply a memory barrier + */ +#define smp_mb__before_clear_bit() smp_mb() +#define smp_mb__after_clear_bit() smp_mb() + +#define BITOP_MASK(nr) (1UL << ((nr) % BITS_PER_LONG)) +#define BITOP_WORD(nr) ((nr) / BITS_PER_LONG) +#define BITOP_LE_SWIZZLE ((BITS_PER_LONG-1) & ~0x7) + +static __inline__ void set_bit(int nr, volatile unsigned long *addr) +{ + unsigned long old; + unsigned long mask = BITOP_MASK(nr); + unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); + + __asm__ __volatile__( +"1:" PPC_LLARX "%0,0,%3 # set_bit\n" + "or %0,%0,%2\n" + PPC405_ERR77(0,%3) + PPC_STLCX "%0,0,%3\n" + "bne- 1b" + : "=&r" (old), "+m" (*p) + : "r" (mask), "r" (p) + : "cc" ); +} + +static __inline__ void clear_bit(int nr, volatile unsigned long *addr) +{ + unsigned long old; + unsigned long mask = BITOP_MASK(nr); + unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); + + __asm__ __volatile__( +"1:" PPC_LLARX "%0,0,%3 # clear_bit\n" + "andc %0,%0,%2\n" + PPC405_ERR77(0,%3) + PPC_STLCX "%0,0,%3\n" + "bne- 1b" + : "=&r" (old), "+m" (*p) + : "r" (mask), "r" (p) + : "cc" ); +} + +static __inline__ void clear_bit_unlock(int nr, volatile unsigned long *addr) +{ + unsigned long old; + unsigned long mask = BITOP_MASK(nr); + unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); + + __asm__ __volatile__( + LWSYNC_ON_SMP +"1:" PPC_LLARX "%0,0,%3 # clear_bit_unlock\n" + "andc %0,%0,%2\n" + PPC405_ERR77(0,%3) + PPC_STLCX "%0,0,%3\n" + "bne- 1b" + : "=&r" (old), "+m" (*p) + : "r" (mask), "r" (p) + : "cc", "memory"); +} + +static __inline__ void change_bit(int nr, volatile unsigned long *addr) +{ + unsigned long old; + unsigned long mask = BITOP_MASK(nr); + unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); + + __asm__ __volatile__( +"1:" PPC_LLARX "%0,0,%3 # change_bit\n" + "xor %0,%0,%2\n" + PPC405_ERR77(0,%3) + PPC_STLCX "%0,0,%3\n" + "bne- 1b" + : "=&r" (old), "+m" (*p) + : "r" (mask), "r" (p) + : "cc" ); +} + +static __inline__ int test_and_set_bit(unsigned long nr, + volatile unsigned long *addr) +{ + unsigned long old, t; + unsigned long mask = BITOP_MASK(nr); + unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); + + __asm__ __volatile__( + LWSYNC_ON_SMP +"1:" PPC_LLARX "%0,0,%3 # test_and_set_bit\n" + "or %1,%0,%2 \n" + PPC405_ERR77(0,%3) + PPC_STLCX "%1,0,%3 \n" + "bne- 1b" + ISYNC_ON_SMP + : "=&r" (old), "=&r" (t) + : "r" (mask), "r" (p) + : "cc", "memory"); + + return (old & mask) != 0; +} + +static __inline__ int test_and_set_bit_lock(unsigned long nr, + volatile unsigned long *addr) +{ + unsigned long old, t; + unsigned long mask = BITOP_MASK(nr); + unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); + + __asm__ __volatile__( +"1:" PPC_LLARX "%0,0,%3 # test_and_set_bit_lock\n" + "or %1,%0,%2 \n" + PPC405_ERR77(0,%3) + PPC_STLCX "%1,0,%3 \n" + "bne- 1b" + ISYNC_ON_SMP + : "=&r" (old), "=&r" (t) + : "r" (mask), "r" (p) + : "cc", "memory"); + + return (old & mask) != 0; +} + +static __inline__ int test_and_clear_bit(unsigned long nr, + volatile unsigned long *addr) +{ + unsigned long old, t; + unsigned long mask = BITOP_MASK(nr); + unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); + + __asm__ __volatile__( + LWSYNC_ON_SMP +"1:" PPC_LLARX "%0,0,%3 # test_and_clear_bit\n" + "andc %1,%0,%2 \n" + PPC405_ERR77(0,%3) + PPC_STLCX "%1,0,%3 \n" + "bne- 1b" + ISYNC_ON_SMP + : "=&r" (old), "=&r" (t) + : "r" (mask), "r" (p) + : "cc", "memory"); + + return (old & mask) != 0; +} + +static __inline__ int test_and_change_bit(unsigned long nr, + volatile unsigned long *addr) +{ + unsigned long old, t; + unsigned long mask = BITOP_MASK(nr); + unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); + + __asm__ __volatile__( + LWSYNC_ON_SMP +"1:" PPC_LLARX "%0,0,%3 # test_and_change_bit\n" + "xor %1,%0,%2 \n" + PPC405_ERR77(0,%3) + PPC_STLCX "%1,0,%3 \n" + "bne- 1b" + ISYNC_ON_SMP + : "=&r" (old), "=&r" (t) + : "r" (mask), "r" (p) + : "cc", "memory"); + + return (old & mask) != 0; +} + +static __inline__ void set_bits(unsigned long mask, unsigned long *addr) +{ + unsigned long old; + + __asm__ __volatile__( +"1:" PPC_LLARX "%0,0,%3 # set_bits\n" + "or %0,%0,%2\n" + PPC_STLCX "%0,0,%3\n" + "bne- 1b" + : "=&r" (old), "+m" (*addr) + : "r" (mask), "r" (addr) + : "cc"); +} + +#include + +static __inline__ void __clear_bit_unlock(int nr, volatile unsigned long *addr) +{ + __asm__ __volatile__(LWSYNC_ON_SMP "" ::: "memory"); + __clear_bit(nr, addr); +} + +/* + * Return the zero-based bit position (LE, not IBM bit numbering) of + * the most significant 1-bit in a double word. + */ +static __inline__ __attribute__((const)) +int __ilog2(unsigned long x) +{ + int lz; + + asm (PPC_CNTLZL "%0,%1" : "=r" (lz) : "r" (x)); + return BITS_PER_LONG - 1 - lz; +} + +static inline __attribute__((const)) +int __ilog2_u32(u32 n) +{ + int bit; + asm ("cntlzw %0,%1" : "=r" (bit) : "r" (n)); + return 31 - bit; +} + +#ifdef __powerpc64__ +static inline __attribute__((const)) +int __ilog2_u64(u64 n) +{ + int bit; + asm ("cntlzd %0,%1" : "=r" (bit) : "r" (n)); + return 63 - bit; +} +#endif + +/* + * Determines the bit position of the least significant 0 bit in the + * specified double word. The returned bit position will be + * zero-based, starting from the right side (63/31 - 0). + */ +static __inline__ unsigned long ffz(unsigned long x) +{ + /* no zero exists anywhere in the 8 byte area. */ + if ((x = ~x) == 0) + return BITS_PER_LONG; + + /* + * Calculate the bit position of the least signficant '1' bit in x + * (since x has been changed this will actually be the least signficant + * '0' bit in * the original x). Note: (x & -x) gives us a mask that + * is the least significant * (RIGHT-most) 1-bit of the value in x. + */ + return __ilog2(x & -x); +} + +static __inline__ int __ffs(unsigned long x) +{ + return __ilog2(x & -x); +} + +/* + * ffs: find first bit set. This is defined the same way as + * the libc and compiler builtin ffs routines, therefore + * differs in spirit from the above ffz (man ffs). + */ +static __inline__ int ffs(int x) +{ + unsigned long i = (unsigned long)x; + return __ilog2(i & -i) + 1; +} + +/* + * fls: find last (most-significant) bit set. + * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32. + */ +static __inline__ int fls(unsigned int x) +{ + int lz; + + asm ("cntlzw %0,%1" : "=r" (lz) : "r" (x)); + return 32 - lz; +} + +static __inline__ unsigned long __fls(unsigned long x) +{ + return __ilog2(x); +} + +/* + * 64-bit can do this using one cntlzd (count leading zeroes doubleword) + * instruction; for 32-bit we use the generic version, which does two + * 32-bit fls calls. + */ +#ifdef __powerpc64__ +static __inline__ int fls64(__u64 x) +{ + int lz; + + asm ("cntlzd %0,%1" : "=r" (lz) : "r" (x)); + return 64 - lz; +} +#else +#include +#endif /* __powerpc64__ */ + +#include +#include + +/* Little-endian versions */ + +static __inline__ int test_le_bit(unsigned long nr, + __const__ unsigned long *addr) +{ + __const__ unsigned char *tmp = (__const__ unsigned char *) addr; + return (tmp[nr >> 3] >> (nr & 7)) & 1; +} + +#define __set_le_bit(nr, addr) \ + __set_bit((nr) ^ BITOP_LE_SWIZZLE, (addr)) +#define __clear_le_bit(nr, addr) \ + __clear_bit((nr) ^ BITOP_LE_SWIZZLE, (addr)) + +#define test_and_set_le_bit(nr, addr) \ + test_and_set_bit((nr) ^ BITOP_LE_SWIZZLE, (addr)) +#define test_and_clear_le_bit(nr, addr) \ + test_and_clear_bit((nr) ^ BITOP_LE_SWIZZLE, (addr)) + +#define __test_and_set_le_bit(nr, addr) \ + __test_and_set_bit((nr) ^ BITOP_LE_SWIZZLE, (addr)) +#define __test_and_clear_le_bit(nr, addr) \ + __test_and_clear_bit((nr) ^ BITOP_LE_SWIZZLE, (addr)) + +#define find_first_zero_le_bit(addr, size) generic_find_next_zero_le_bit((addr), (size), 0) +unsigned long generic_find_next_zero_le_bit(const unsigned long *addr, + unsigned long size, unsigned long offset); + +unsigned long generic_find_next_le_bit(const unsigned long *addr, + unsigned long size, unsigned long offset); +/* Bitmap functions for the ext2 filesystem */ + +#define ext2_set_bit(nr,addr) \ + __test_and_set_le_bit((nr), (unsigned long*)addr) +#define ext2_clear_bit(nr, addr) \ + __test_and_clear_le_bit((nr), (unsigned long*)addr) + +#define ext2_set_bit_atomic(lock, nr, addr) \ + test_and_set_le_bit((nr), (unsigned long*)addr) +#define ext2_clear_bit_atomic(lock, nr, addr) \ + test_and_clear_le_bit((nr), (unsigned long*)addr) + +#define ext2_test_bit(nr, addr) test_le_bit((nr),(unsigned long*)addr) + +#define ext2_find_first_zero_bit(addr, size) \ + find_first_zero_le_bit((unsigned long*)addr, size) +#define ext2_find_next_zero_bit(addr, size, off) \ + generic_find_next_zero_le_bit((unsigned long*)addr, size, off) + +#define ext2_find_next_bit(addr, size, off) \ + generic_find_next_le_bit((unsigned long *)addr, size, off) +/* Bitmap functions for the minix filesystem. */ + +#define minix_test_and_set_bit(nr,addr) \ + __test_and_set_le_bit(nr, (unsigned long *)addr) +#define minix_set_bit(nr,addr) \ + __set_le_bit(nr, (unsigned long *)addr) +#define minix_test_and_clear_bit(nr,addr) \ + __test_and_clear_le_bit(nr, (unsigned long *)addr) +#define minix_test_bit(nr,addr) \ + test_le_bit(nr, (unsigned long *)addr) + +#define minix_find_first_zero_bit(addr,size) \ + find_first_zero_le_bit((unsigned long *)addr, size) + +#include + +#endif /* __KERNEL__ */ + +#endif /* _ASM_POWERPC_BITOPS_H */ diff --git a/arch/powerpc/include/asm/bootx.h b/arch/powerpc/include/asm/bootx.h new file mode 100644 index 00000000000..57b82e3f89c --- /dev/null +++ b/arch/powerpc/include/asm/bootx.h @@ -0,0 +1,171 @@ +/* + * This file describes the structure passed from the BootX application + * (for MacOS) when it is used to boot Linux. + * + * Written by Benjamin Herrenschmidt. + */ + + +#ifndef __ASM_BOOTX_H__ +#define __ASM_BOOTX_H__ + +#include + +#ifdef macintosh +#include +#include "linux_type_defs.h" +#endif + +#ifdef macintosh +/* All this requires PowerPC alignment */ +#pragma options align=power +#endif + +/* On kernel entry: + * + * r3 = 0x426f6f58 ('BooX') + * r4 = pointer to boot_infos + * r5 = NULL + * + * Data and instruction translation disabled, interrupts + * disabled, kernel loaded at physical 0x00000000 on PCI + * machines (will be different on NuBus). + */ + +#define BOOT_INFO_VERSION 5 +#define BOOT_INFO_COMPATIBLE_VERSION 1 + +/* Bit in the architecture flag mask. More to be defined in + future versions. Note that either BOOT_ARCH_PCI or + BOOT_ARCH_NUBUS is set. The other BOOT_ARCH_NUBUS_xxx are + set additionally when BOOT_ARCH_NUBUS is set. + */ +#define BOOT_ARCH_PCI 0x00000001UL +#define BOOT_ARCH_NUBUS 0x00000002UL +#define BOOT_ARCH_NUBUS_PDM 0x00000010UL +#define BOOT_ARCH_NUBUS_PERFORMA 0x00000020UL +#define BOOT_ARCH_NUBUS_POWERBOOK 0x00000040UL + +/* Maximum number of ranges in phys memory map */ +#define MAX_MEM_MAP_SIZE 26 + +/* This is the format of an element in the physical memory map. Note that + the map is optional and current BootX will only build it for pre-PCI + machines */ +typedef struct boot_info_map_entry +{ + __u32 physAddr; /* Physical starting address */ + __u32 size; /* Size in bytes */ +} boot_info_map_entry_t; + + +/* Here are the boot informations that are passed to the bootstrap + * Note that the kernel arguments and the device tree are appended + * at the end of this structure. */ +typedef struct boot_infos +{ + /* Version of this structure */ + __u32 version; + /* backward compatible down to version: */ + __u32 compatible_version; + + /* NEW (vers. 2) this holds the current _logical_ base addr of + the frame buffer (for use by early boot message) */ + __u8* logicalDisplayBase; + + /* NEW (vers. 4) Apple's machine identification */ + __u32 machineID; + + /* NEW (vers. 4) Detected hw architecture */ + __u32 architecture; + + /* The device tree (internal addresses relative to the beginning of the tree, + * device tree offset relative to the beginning of this structure). + * On pre-PCI macintosh (BOOT_ARCH_PCI bit set to 0 in architecture), this + * field is 0. + */ + __u32 deviceTreeOffset; /* Device tree offset */ + __u32 deviceTreeSize; /* Size of the device tree */ + + /* Some infos about the current MacOS display */ + __u32 dispDeviceRect[4]; /* left,top,right,bottom */ + __u32 dispDeviceDepth; /* (8, 16 or 32) */ + __u8* dispDeviceBase; /* base address (physical) */ + __u32 dispDeviceRowBytes; /* rowbytes (in bytes) */ + __u32 dispDeviceColorsOffset; /* Colormap (8 bits only) or 0 (*) */ + /* Optional offset in the registry to the current + * MacOS display. (Can be 0 when not detected) */ + __u32 dispDeviceRegEntryOffset; + + /* Optional pointer to boot ramdisk (offset from this structure) */ + __u32 ramDisk; + __u32 ramDiskSize; /* size of ramdisk image */ + + /* Kernel command line arguments (offset from this structure) */ + __u32 kernelParamsOffset; + + /* ALL BELOW NEW (vers. 4) */ + + /* This defines the physical memory. Valid with BOOT_ARCH_NUBUS flag + (non-PCI) only. On PCI, memory is contiguous and it's size is in the + device-tree. */ + boot_info_map_entry_t + physMemoryMap[MAX_MEM_MAP_SIZE]; /* Where the phys memory is */ + __u32 physMemoryMapSize; /* How many entries in map */ + + + /* The framebuffer size (optional, currently 0) */ + __u32 frameBufferSize; /* Represents a max size, can be 0. */ + + /* NEW (vers. 5) */ + + /* Total params size (args + colormap + device tree + ramdisk) */ + __u32 totalParamsSize; + +} boot_infos_t; + +#ifdef __KERNEL__ +/* (*) The format of the colormap is 256 * 3 * 2 bytes. Each color index + * is represented by 3 short words containing a 16 bits (unsigned) color + * component. Later versions may contain the gamma table for direct-color + * devices here. + */ +#define BOOTX_COLORTABLE_SIZE (256UL*3UL*2UL) + +/* BootX passes the device-tree using a format that comes from earlier + * ppc32 kernels. This used to match what is in prom.h, but not anymore + * so we now define it here + */ +struct bootx_dt_prop { + u32 name; + int length; + u32 value; + u32 next; +}; + +struct bootx_dt_node { + u32 unused0; + u32 unused1; + u32 phandle; /* not really available */ + u32 unused2; + u32 unused3; + u32 unused4; + u32 unused5; + u32 full_name; + u32 properties; + u32 parent; + u32 child; + u32 sibling; + u32 next; + u32 allnext; +}; + +extern void bootx_init(unsigned long r4, unsigned long phys); + +#endif /* __KERNEL__ */ + +#ifdef macintosh +#pragma options align=reset +#endif + +#endif diff --git a/arch/powerpc/include/asm/btext.h b/arch/powerpc/include/asm/btext.h new file mode 100644 index 00000000000..906f46e3100 --- /dev/null +++ b/arch/powerpc/include/asm/btext.h @@ -0,0 +1,28 @@ +/* + * Definitions for using the procedures in btext.c. + * + * Benjamin Herrenschmidt + */ +#ifndef __PPC_BTEXT_H +#define __PPC_BTEXT_H +#ifdef __KERNEL__ + +extern int btext_find_display(int allow_nonstdout); +extern void btext_update_display(unsigned long phys, int width, int height, + int depth, int pitch); +extern void btext_setup_display(int width, int height, int depth, int pitch, + unsigned long address); +extern void btext_prepare_BAT(void); +extern void btext_unmap(void); + +extern void btext_drawchar(char c); +extern void btext_drawstring(const char *str); +extern void btext_drawhex(unsigned long v); +extern void btext_drawtext(const char *c, unsigned int len); + +extern void btext_clearscreen(void); +extern void btext_flushscreen(void); +extern void btext_flushline(void); + +#endif /* __KERNEL__ */ +#endif /* __PPC_BTEXT_H */ diff --git a/arch/powerpc/include/asm/bug.h b/arch/powerpc/include/asm/bug.h new file mode 100644 index 00000000000..e55d1f66b86 --- /dev/null +++ b/arch/powerpc/include/asm/bug.h @@ -0,0 +1,121 @@ +#ifndef _ASM_POWERPC_BUG_H +#define _ASM_POWERPC_BUG_H +#ifdef __KERNEL__ + +#include +/* + * Define an illegal instr to trap on the bug. + * We don't use 0 because that marks the end of a function + * in the ELF ABI. That's "Boo Boo" in case you wonder... + */ +#define BUG_OPCODE .long 0x00b00b00 /* For asm */ +#define BUG_ILLEGAL_INSTR "0x00b00b00" /* For BUG macro */ + +#ifdef CONFIG_BUG + +#ifdef __ASSEMBLY__ +#ifdef CONFIG_DEBUG_BUGVERBOSE +.macro EMIT_BUG_ENTRY addr,file,line,flags + .section __bug_table,"a" +5001: PPC_LONG \addr, 5002f + .short \line, \flags + .org 5001b+BUG_ENTRY_SIZE + .previous + .section .rodata,"a" +5002: .asciz "\file" + .previous +.endm +#else + .macro EMIT_BUG_ENTRY addr,file,line,flags + .section __bug_table,"a" +5001: PPC_LONG \addr + .short \flags + .org 5001b+BUG_ENTRY_SIZE + .previous +.endm +#endif /* verbose */ + +#else /* !__ASSEMBLY__ */ +/* _EMIT_BUG_ENTRY expects args %0,%1,%2,%3 to be FILE, LINE, flags and + sizeof(struct bug_entry), respectively */ +#ifdef CONFIG_DEBUG_BUGVERBOSE +#define _EMIT_BUG_ENTRY \ + ".section __bug_table,\"a\"\n" \ + "2:\t" PPC_LONG "1b, %0\n" \ + "\t.short %1, %2\n" \ + ".org 2b+%3\n" \ + ".previous\n" +#else +#define _EMIT_BUG_ENTRY \ + ".section __bug_table,\"a\"\n" \ + "2:\t" PPC_LONG "1b\n" \ + "\t.short %2\n" \ + ".org 2b+%3\n" \ + ".previous\n" +#endif + +/* + * BUG_ON() and WARN_ON() do their best to cooperate with compile-time + * optimisations. However depending on the complexity of the condition + * some compiler versions may not produce optimal results. + */ + +#define BUG() do { \ + __asm__ __volatile__( \ + "1: twi 31,0,0\n" \ + _EMIT_BUG_ENTRY \ + : : "i" (__FILE__), "i" (__LINE__), \ + "i" (0), "i" (sizeof(struct bug_entry))); \ + for(;;) ; \ +} while (0) + +#define BUG_ON(x) do { \ + if (__builtin_constant_p(x)) { \ + if (x) \ + BUG(); \ + } else { \ + __asm__ __volatile__( \ + "1: "PPC_TLNEI" %4,0\n" \ + _EMIT_BUG_ENTRY \ + : : "i" (__FILE__), "i" (__LINE__), "i" (0), \ + "i" (sizeof(struct bug_entry)), \ + "r" ((__force long)(x))); \ + } \ +} while (0) + +#define __WARN() do { \ + __asm__ __volatile__( \ + "1: twi 31,0,0\n" \ + _EMIT_BUG_ENTRY \ + : : "i" (__FILE__), "i" (__LINE__), \ + "i" (BUGFLAG_WARNING), \ + "i" (sizeof(struct bug_entry))); \ +} while (0) + +#define WARN_ON(x) ({ \ + int __ret_warn_on = !!(x); \ + if (__builtin_constant_p(__ret_warn_on)) { \ + if (__ret_warn_on) \ + __WARN(); \ + } else { \ + __asm__ __volatile__( \ + "1: "PPC_TLNEI" %4,0\n" \ + _EMIT_BUG_ENTRY \ + : : "i" (__FILE__), "i" (__LINE__), \ + "i" (BUGFLAG_WARNING), \ + "i" (sizeof(struct bug_entry)), \ + "r" (__ret_warn_on)); \ + } \ + unlikely(__ret_warn_on); \ +}) + +#define HAVE_ARCH_BUG +#define HAVE_ARCH_BUG_ON +#define HAVE_ARCH_WARN_ON +#endif /* __ASSEMBLY __ */ +#endif /* CONFIG_BUG */ + +#include + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_BUG_H */ diff --git a/arch/powerpc/include/asm/bugs.h b/arch/powerpc/include/asm/bugs.h new file mode 100644 index 00000000000..42fdb73e306 --- /dev/null +++ b/arch/powerpc/include/asm/bugs.h @@ -0,0 +1,18 @@ +#ifndef _ASM_POWERPC_BUGS_H +#define _ASM_POWERPC_BUGS_H + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/* + * This file is included by 'init/main.c' to check for + * architecture-dependent bugs. + */ + +static inline void check_bugs(void) { } + +#endif /* _ASM_POWERPC_BUGS_H */ diff --git a/arch/powerpc/include/asm/byteorder.h b/arch/powerpc/include/asm/byteorder.h new file mode 100644 index 00000000000..b37752214a1 --- /dev/null +++ b/arch/powerpc/include/asm/byteorder.h @@ -0,0 +1,89 @@ +#ifndef _ASM_POWERPC_BYTEORDER_H +#define _ASM_POWERPC_BYTEORDER_H + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include + +#ifdef __GNUC__ +#ifdef __KERNEL__ + +static __inline__ __u16 ld_le16(const volatile __u16 *addr) +{ + __u16 val; + + __asm__ __volatile__ ("lhbrx %0,0,%1" : "=r" (val) : "r" (addr), "m" (*addr)); + return val; +} + +static __inline__ void st_le16(volatile __u16 *addr, const __u16 val) +{ + __asm__ __volatile__ ("sthbrx %1,0,%2" : "=m" (*addr) : "r" (val), "r" (addr)); +} + +static __inline__ __u32 ld_le32(const volatile __u32 *addr) +{ + __u32 val; + + __asm__ __volatile__ ("lwbrx %0,0,%1" : "=r" (val) : "r" (addr), "m" (*addr)); + return val; +} + +static __inline__ void st_le32(volatile __u32 *addr, const __u32 val) +{ + __asm__ __volatile__ ("stwbrx %1,0,%2" : "=m" (*addr) : "r" (val), "r" (addr)); +} + +static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 value) +{ + __u16 result; + + __asm__("rlwimi %0,%1,8,16,23" + : "=r" (result) + : "r" (value), "0" (value >> 8)); + return result; +} + +static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 value) +{ + __u32 result; + + __asm__("rlwimi %0,%1,24,16,23\n\t" + "rlwimi %0,%1,8,8,15\n\t" + "rlwimi %0,%1,24,0,7" + : "=r" (result) + : "r" (value), "0" (value >> 24)); + return result; +} + +#define __arch__swab16(x) ___arch__swab16(x) +#define __arch__swab32(x) ___arch__swab32(x) + +/* The same, but returns converted value from the location pointer by addr. */ +#define __arch__swab16p(addr) ld_le16(addr) +#define __arch__swab32p(addr) ld_le32(addr) + +/* The same, but do the conversion in situ, ie. put the value back to addr. */ +#define __arch__swab16s(addr) st_le16(addr,*addr) +#define __arch__swab32s(addr) st_le32(addr,*addr) + +#endif /* __KERNEL__ */ + +#ifndef __STRICT_ANSI__ +#define __BYTEORDER_HAS_U64__ +#ifndef __powerpc64__ +#define __SWAB_64_THRU_32__ +#endif /* __powerpc64__ */ +#endif /* __STRICT_ANSI__ */ + +#endif /* __GNUC__ */ + +#include + +#endif /* _ASM_POWERPC_BYTEORDER_H */ diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h new file mode 100644 index 00000000000..81de6eb3455 --- /dev/null +++ b/arch/powerpc/include/asm/cache.h @@ -0,0 +1,45 @@ +#ifndef _ASM_POWERPC_CACHE_H +#define _ASM_POWERPC_CACHE_H + +#ifdef __KERNEL__ + + +/* bytes per L1 cache line */ +#if defined(CONFIG_8xx) || defined(CONFIG_403GCX) +#define L1_CACHE_SHIFT 4 +#define MAX_COPY_PREFETCH 1 +#elif defined(CONFIG_PPC_E500MC) +#define L1_CACHE_SHIFT 6 +#define MAX_COPY_PREFETCH 4 +#elif defined(CONFIG_PPC32) +#define L1_CACHE_SHIFT 5 +#define MAX_COPY_PREFETCH 4 +#else /* CONFIG_PPC64 */ +#define L1_CACHE_SHIFT 7 +#endif + +#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) + +#define SMP_CACHE_BYTES L1_CACHE_BYTES + +#if defined(__powerpc64__) && !defined(__ASSEMBLY__) +struct ppc64_caches { + u32 dsize; /* L1 d-cache size */ + u32 dline_size; /* L1 d-cache line size */ + u32 log_dline_size; + u32 dlines_per_page; + u32 isize; /* L1 i-cache size */ + u32 iline_size; /* L1 i-cache line size */ + u32 log_iline_size; + u32 ilines_per_page; +}; + +extern struct ppc64_caches ppc64_caches; +#endif /* __powerpc64__ && ! __ASSEMBLY__ */ + +#if !defined(__ASSEMBLY__) +#define __read_mostly __attribute__((__section__(".data.read_mostly"))) +#endif + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_CACHE_H */ diff --git a/arch/powerpc/include/asm/cacheflush.h b/arch/powerpc/include/asm/cacheflush.h new file mode 100644 index 00000000000..ba667a383b8 --- /dev/null +++ b/arch/powerpc/include/asm/cacheflush.h @@ -0,0 +1,75 @@ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_POWERPC_CACHEFLUSH_H +#define _ASM_POWERPC_CACHEFLUSH_H + +#ifdef __KERNEL__ + +#include +#include + +/* + * No cache flushing is required when address mappings are changed, + * because the caches on PowerPCs are physically addressed. + */ +#define flush_cache_all() do { } while (0) +#define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) +#define flush_cache_range(vma, start, end) do { } while (0) +#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) +#define flush_icache_page(vma, page) do { } while (0) +#define flush_cache_vmap(start, end) do { } while (0) +#define flush_cache_vunmap(start, end) do { } while (0) + +extern void flush_dcache_page(struct page *page); +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) + +extern void __flush_icache_range(unsigned long, unsigned long); +static inline void flush_icache_range(unsigned long start, unsigned long stop) +{ + if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE)) + __flush_icache_range(start, stop); +} + +extern void flush_icache_user_range(struct vm_area_struct *vma, + struct page *page, unsigned long addr, + int len); +extern void __flush_dcache_icache(void *page_va); +extern void flush_dcache_icache_page(struct page *page); +#if defined(CONFIG_PPC32) && !defined(CONFIG_BOOKE) +extern void __flush_dcache_icache_phys(unsigned long physaddr); +#endif /* CONFIG_PPC32 && !CONFIG_BOOKE */ + +extern void flush_dcache_range(unsigned long start, unsigned long stop); +#ifdef CONFIG_PPC32 +extern void clean_dcache_range(unsigned long start, unsigned long stop); +extern void invalidate_dcache_range(unsigned long start, unsigned long stop); +#endif /* CONFIG_PPC32 */ +#ifdef CONFIG_PPC64 +extern void flush_inval_dcache_range(unsigned long start, unsigned long stop); +extern void flush_dcache_phys_range(unsigned long start, unsigned long stop); +#endif + +#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ + do { \ + memcpy(dst, src, len); \ + flush_icache_user_range(vma, page, vaddr, len); \ + } while (0) +#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ + memcpy(dst, src, len) + + + +#ifdef CONFIG_DEBUG_PAGEALLOC +/* internal debugging function */ +void kernel_map_pages(struct page *page, int numpages, int enable); +#endif + +#endif /* __KERNEL__ */ + +#endif /* _ASM_POWERPC_CACHEFLUSH_H */ diff --git a/arch/powerpc/include/asm/cell-pmu.h b/arch/powerpc/include/asm/cell-pmu.h new file mode 100644 index 00000000000..8066eede3a0 --- /dev/null +++ b/arch/powerpc/include/asm/cell-pmu.h @@ -0,0 +1,105 @@ +/* + * Cell Broadband Engine Performance Monitor + * + * (C) Copyright IBM Corporation 2006 + * + * Author: + * David Erb (djerb@us.ibm.com) + * Kevin Corry (kevcorry@us.ibm.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_CELL_PMU_H__ +#define __ASM_CELL_PMU_H__ + +/* The Cell PMU has four hardware performance counters, which can be + * configured as four 32-bit counters or eight 16-bit counters. + */ +#define NR_PHYS_CTRS 4 +#define NR_CTRS (NR_PHYS_CTRS * 2) + +/* Macros for the pm_control register. */ +#define CBE_PM_16BIT_CTR(ctr) (1 << (24 - ((ctr) & (NR_PHYS_CTRS - 1)))) +#define CBE_PM_ENABLE_PERF_MON 0x80000000 +#define CBE_PM_STOP_AT_MAX 0x40000000 +#define CBE_PM_TRACE_MODE_GET(pm_control) (((pm_control) >> 28) & 0x3) +#define CBE_PM_TRACE_MODE_SET(mode) (((mode) & 0x3) << 28) +#define CBE_PM_COUNT_MODE_SET(count) (((count) & 0x3) << 18) +#define CBE_PM_FREEZE_ALL_CTRS 0x00100000 +#define CBE_PM_ENABLE_EXT_TRACE 0x00008000 + +/* Macros for the trace_address register. */ +#define CBE_PM_TRACE_BUF_FULL 0x00000800 +#define CBE_PM_TRACE_BUF_EMPTY 0x00000400 +#define CBE_PM_TRACE_BUF_DATA_COUNT(ta) ((ta) & 0x3ff) +#define CBE_PM_TRACE_BUF_MAX_COUNT 0x400 + +/* Macros for the pm07_control registers. */ +#define CBE_PM_CTR_INPUT_MUX(pm07_control) (((pm07_control) >> 26) & 0x3f) +#define CBE_PM_CTR_INPUT_CONTROL 0x02000000 +#define CBE_PM_CTR_POLARITY 0x01000000 +#define CBE_PM_CTR_COUNT_CYCLES 0x00800000 +#define CBE_PM_CTR_ENABLE 0x00400000 +#define PM07_CTR_INPUT_MUX(x) (((x) & 0x3F) << 26) +#define PM07_CTR_INPUT_CONTROL(x) (((x) & 1) << 25) +#define PM07_CTR_POLARITY(x) (((x) & 1) << 24) +#define PM07_CTR_COUNT_CYCLES(x) (((x) & 1) << 23) +#define PM07_CTR_ENABLE(x) (((x) & 1) << 22) + +/* Macros for the pm_status register. */ +#define CBE_PM_CTR_OVERFLOW_INTR(ctr) (1 << (31 - ((ctr) & 7))) + +enum pm_reg_name { + group_control, + debug_bus_control, + trace_address, + ext_tr_timer, + pm_status, + pm_control, + pm_interval, + pm_start_stop, +}; + +/* Routines for reading/writing the PMU registers. */ +extern u32 cbe_read_phys_ctr(u32 cpu, u32 phys_ctr); +extern void cbe_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val); +extern u32 cbe_read_ctr(u32 cpu, u32 ctr); +extern void cbe_write_ctr(u32 cpu, u32 ctr, u32 val); + +extern u32 cbe_read_pm07_control(u32 cpu, u32 ctr); +extern void cbe_write_pm07_control(u32 cpu, u32 ctr, u32 val); +extern u32 cbe_read_pm(u32 cpu, enum pm_reg_name reg); +extern void cbe_write_pm(u32 cpu, enum pm_reg_name reg, u32 val); + +extern u32 cbe_get_ctr_size(u32 cpu, u32 phys_ctr); +extern void cbe_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size); + +extern void cbe_enable_pm(u32 cpu); +extern void cbe_disable_pm(u32 cpu); + +extern void cbe_read_trace_buffer(u32 cpu, u64 *buf); + +extern void cbe_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask); +extern void cbe_disable_pm_interrupts(u32 cpu); +extern u32 cbe_get_and_clear_pm_interrupts(u32 cpu); +extern void cbe_sync_irq(int node); + +#define CBE_COUNT_SUPERVISOR_MODE 0 +#define CBE_COUNT_HYPERVISOR_MODE 1 +#define CBE_COUNT_PROBLEM_MODE 2 +#define CBE_COUNT_ALL_MODES 3 + +#endif /* __ASM_CELL_PMU_H__ */ diff --git a/arch/powerpc/include/asm/cell-regs.h b/arch/powerpc/include/asm/cell-regs.h new file mode 100644 index 00000000000..fd6fd00434e --- /dev/null +++ b/arch/powerpc/include/asm/cell-regs.h @@ -0,0 +1,315 @@ +/* + * cbe_regs.h + * + * This file is intended to hold the various register definitions for CBE + * on-chip system devices (memory controller, IO controller, etc...) + * + * (C) Copyright IBM Corporation 2001,2006 + * + * Authors: Maximino Aguilar (maguilar@us.ibm.com) + * David J. Erb (djerb@us.ibm.com) + * + * (c) 2006 Benjamin Herrenschmidt , IBM Corp. + */ + +#ifndef CBE_REGS_H +#define CBE_REGS_H + +#include + +/* + * + * Some HID register definitions + * + */ + +/* CBE specific HID0 bits */ +#define HID0_CBE_THERM_WAKEUP 0x0000020000000000ul +#define HID0_CBE_SYSERR_WAKEUP 0x0000008000000000ul +#define HID0_CBE_THERM_INT_EN 0x0000000400000000ul +#define HID0_CBE_SYSERR_INT_EN 0x0000000200000000ul + +#define MAX_CBE 2 + +/* + * + * Pervasive unit register definitions + * + */ + +union spe_reg { + u64 val; + u8 spe[8]; +}; + +union ppe_spe_reg { + u64 val; + struct { + u32 ppe; + u32 spe; + }; +}; + + +struct cbe_pmd_regs { + /* Debug Bus Control */ + u64 pad_0x0000; /* 0x0000 */ + + u64 group_control; /* 0x0008 */ + + u8 pad_0x0010_0x00a8 [0x00a8 - 0x0010]; /* 0x0010 */ + + u64 debug_bus_control; /* 0x00a8 */ + + u8 pad_0x00b0_0x0100 [0x0100 - 0x00b0]; /* 0x00b0 */ + + u64 trace_aux_data; /* 0x0100 */ + u64 trace_buffer_0_63; /* 0x0108 */ + u64 trace_buffer_64_127; /* 0x0110 */ + u64 trace_address; /* 0x0118 */ + u64 ext_tr_timer; /* 0x0120 */ + + u8 pad_0x0128_0x0400 [0x0400 - 0x0128]; /* 0x0128 */ + + /* Performance Monitor */ + u64 pm_status; /* 0x0400 */ + u64 pm_control; /* 0x0408 */ + u64 pm_interval; /* 0x0410 */ + u64 pm_ctr[4]; /* 0x0418 */ + u64 pm_start_stop; /* 0x0438 */ + u64 pm07_control[8]; /* 0x0440 */ + + u8 pad_0x0480_0x0800 [0x0800 - 0x0480]; /* 0x0480 */ + + /* Thermal Sensor Registers */ + union spe_reg ts_ctsr1; /* 0x0800 */ + u64 ts_ctsr2; /* 0x0808 */ + union spe_reg ts_mtsr1; /* 0x0810 */ + u64 ts_mtsr2; /* 0x0818 */ + union spe_reg ts_itr1; /* 0x0820 */ + u64 ts_itr2; /* 0x0828 */ + u64 ts_gitr; /* 0x0830 */ + u64 ts_isr; /* 0x0838 */ + u64 ts_imr; /* 0x0840 */ + union spe_reg tm_cr1; /* 0x0848 */ + u64 tm_cr2; /* 0x0850 */ + u64 tm_simr; /* 0x0858 */ + union ppe_spe_reg tm_tpr; /* 0x0860 */ + union spe_reg tm_str1; /* 0x0868 */ + u64 tm_str2; /* 0x0870 */ + union ppe_spe_reg tm_tsr; /* 0x0878 */ + + /* Power Management */ + u64 pmcr; /* 0x0880 */ +#define CBE_PMD_PAUSE_ZERO_CONTROL 0x10000 + u64 pmsr; /* 0x0888 */ + + /* Time Base Register */ + u64 tbr; /* 0x0890 */ + + u8 pad_0x0898_0x0c00 [0x0c00 - 0x0898]; /* 0x0898 */ + + /* Fault Isolation Registers */ + u64 checkstop_fir; /* 0x0c00 */ + u64 recoverable_fir; /* 0x0c08 */ + u64 spec_att_mchk_fir; /* 0x0c10 */ + u32 fir_mode_reg; /* 0x0c18 */ + u8 pad_0x0c1c_0x0c20 [4]; /* 0x0c1c */ +#define CBE_PMD_FIR_MODE_M8 0x00800 + u64 fir_enable_mask; /* 0x0c20 */ + + u8 pad_0x0c28_0x0ca8 [0x0ca8 - 0x0c28]; /* 0x0c28 */ + u64 ras_esc_0; /* 0x0ca8 */ + u8 pad_0x0cb0_0x1000 [0x1000 - 0x0cb0]; /* 0x0cb0 */ +}; + +extern struct cbe_pmd_regs __iomem *cbe_get_pmd_regs(struct device_node *np); +extern struct cbe_pmd_regs __iomem *cbe_get_cpu_pmd_regs(int cpu); + +/* + * PMU shadow registers + * + * Many of the registers in the performance monitoring unit are write-only, + * so we need to save a copy of what we write to those registers. + * + * The actual data counters are read/write. However, writing to the counters + * only takes effect if the PMU is enabled. Otherwise the value is stored in + * a hardware latch until the next time the PMU is enabled. So we save a copy + * of the counter values if we need to read them back while the PMU is + * disabled. The counter_value_in_latch field is a bitmap indicating which + * counters currently have a value waiting to be written. + */ + +struct cbe_pmd_shadow_regs { + u32 group_control; + u32 debug_bus_control; + u32 trace_address; + u32 ext_tr_timer; + u32 pm_status; + u32 pm_control; + u32 pm_interval; + u32 pm_start_stop; + u32 pm07_control[NR_CTRS]; + + u32 pm_ctr[NR_PHYS_CTRS]; + u32 counter_value_in_latch; +}; + +extern struct cbe_pmd_shadow_regs *cbe_get_pmd_shadow_regs(struct device_node *np); +extern struct cbe_pmd_shadow_regs *cbe_get_cpu_pmd_shadow_regs(int cpu); + +/* + * + * IIC unit register definitions + * + */ + +struct cbe_iic_pending_bits { + u32 data; + u8 flags; + u8 class; + u8 source; + u8 prio; +}; + +#define CBE_IIC_IRQ_VALID 0x80 +#define CBE_IIC_IRQ_IPI 0x40 + +struct cbe_iic_thread_regs { + struct cbe_iic_pending_bits pending; + struct cbe_iic_pending_bits pending_destr; + u64 generate; + u64 prio; +}; + +struct cbe_iic_regs { + u8 pad_0x0000_0x0400[0x0400 - 0x0000]; /* 0x0000 */ + + /* IIC interrupt registers */ + struct cbe_iic_thread_regs thread[2]; /* 0x0400 */ + + u64 iic_ir; /* 0x0440 */ +#define CBE_IIC_IR_PRIO(x) (((x) & 0xf) << 12) +#define CBE_IIC_IR_DEST_NODE(x) (((x) & 0xf) << 4) +#define CBE_IIC_IR_DEST_UNIT(x) ((x) & 0xf) +#define CBE_IIC_IR_IOC_0 0x0 +#define CBE_IIC_IR_IOC_1S 0xb +#define CBE_IIC_IR_PT_0 0xe +#define CBE_IIC_IR_PT_1 0xf + + u64 iic_is; /* 0x0448 */ +#define CBE_IIC_IS_PMI 0x2 + + u8 pad_0x0450_0x0500[0x0500 - 0x0450]; /* 0x0450 */ + + /* IOC FIR */ + u64 ioc_fir_reset; /* 0x0500 */ + u64 ioc_fir_set; /* 0x0508 */ + u64 ioc_checkstop_enable; /* 0x0510 */ + u64 ioc_fir_error_mask; /* 0x0518 */ + u64 ioc_syserr_enable; /* 0x0520 */ + u64 ioc_fir; /* 0x0528 */ + + u8 pad_0x0530_0x1000[0x1000 - 0x0530]; /* 0x0530 */ +}; + +extern struct cbe_iic_regs __iomem *cbe_get_iic_regs(struct device_node *np); +extern struct cbe_iic_regs __iomem *cbe_get_cpu_iic_regs(int cpu); + + +struct cbe_mic_tm_regs { + u8 pad_0x0000_0x0040[0x0040 - 0x0000]; /* 0x0000 */ + + u64 mic_ctl_cnfg2; /* 0x0040 */ +#define CBE_MIC_ENABLE_AUX_TRC 0x8000000000000000LL +#define CBE_MIC_DISABLE_PWR_SAV_2 0x0200000000000000LL +#define CBE_MIC_DISABLE_AUX_TRC_WRAP 0x0100000000000000LL +#define CBE_MIC_ENABLE_AUX_TRC_INT 0x0080000000000000LL + + u64 pad_0x0048; /* 0x0048 */ + + u64 mic_aux_trc_base; /* 0x0050 */ + u64 mic_aux_trc_max_addr; /* 0x0058 */ + u64 mic_aux_trc_cur_addr; /* 0x0060 */ + u64 mic_aux_trc_grf_addr; /* 0x0068 */ + u64 mic_aux_trc_grf_data; /* 0x0070 */ + + u64 pad_0x0078; /* 0x0078 */ + + u64 mic_ctl_cnfg_0; /* 0x0080 */ +#define CBE_MIC_DISABLE_PWR_SAV_0 0x8000000000000000LL + + u64 pad_0x0088; /* 0x0088 */ + + u64 slow_fast_timer_0; /* 0x0090 */ + u64 slow_next_timer_0; /* 0x0098 */ + + u8 pad_0x00a0_0x00f8[0x00f8 - 0x00a0]; /* 0x00a0 */ + u64 mic_df_ecc_address_0; /* 0x00f8 */ + + u8 pad_0x0100_0x01b8[0x01b8 - 0x0100]; /* 0x0100 */ + u64 mic_df_ecc_address_1; /* 0x01b8 */ + + u64 mic_ctl_cnfg_1; /* 0x01c0 */ +#define CBE_MIC_DISABLE_PWR_SAV_1 0x8000000000000000LL + + u64 pad_0x01c8; /* 0x01c8 */ + + u64 slow_fast_timer_1; /* 0x01d0 */ + u64 slow_next_timer_1; /* 0x01d8 */ + + u8 pad_0x01e0_0x0208[0x0208 - 0x01e0]; /* 0x01e0 */ + u64 mic_exc; /* 0x0208 */ +#define CBE_MIC_EXC_BLOCK_SCRUB 0x0800000000000000ULL +#define CBE_MIC_EXC_FAST_SCRUB 0x0100000000000000ULL + + u64 mic_mnt_cfg; /* 0x0210 */ +#define CBE_MIC_MNT_CFG_CHAN_0_POP 0x0002000000000000ULL +#define CBE_MIC_MNT_CFG_CHAN_1_POP 0x0004000000000000ULL + + u64 mic_df_config; /* 0x0218 */ +#define CBE_MIC_ECC_DISABLE_0 0x4000000000000000ULL +#define CBE_MIC_ECC_REP_SINGLE_0 0x2000000000000000ULL +#define CBE_MIC_ECC_DISABLE_1 0x0080000000000000ULL +#define CBE_MIC_ECC_REP_SINGLE_1 0x0040000000000000ULL + + u8 pad_0x0220_0x0230[0x0230 - 0x0220]; /* 0x0220 */ + u64 mic_fir; /* 0x0230 */ +#define CBE_MIC_FIR_ECC_SINGLE_0_ERR 0x0200000000000000ULL +#define CBE_MIC_FIR_ECC_MULTI_0_ERR 0x0100000000000000ULL +#define CBE_MIC_FIR_ECC_SINGLE_1_ERR 0x0080000000000000ULL +#define CBE_MIC_FIR_ECC_MULTI_1_ERR 0x0040000000000000ULL +#define CBE_MIC_FIR_ECC_ERR_MASK 0xffff000000000000ULL +#define CBE_MIC_FIR_ECC_SINGLE_0_CTE 0x0000020000000000ULL +#define CBE_MIC_FIR_ECC_MULTI_0_CTE 0x0000010000000000ULL +#define CBE_MIC_FIR_ECC_SINGLE_1_CTE 0x0000008000000000ULL +#define CBE_MIC_FIR_ECC_MULTI_1_CTE 0x0000004000000000ULL +#define CBE_MIC_FIR_ECC_CTE_MASK 0x0000ffff00000000ULL +#define CBE_MIC_FIR_ECC_SINGLE_0_RESET 0x0000000002000000ULL +#define CBE_MIC_FIR_ECC_MULTI_0_RESET 0x0000000001000000ULL +#define CBE_MIC_FIR_ECC_SINGLE_1_RESET 0x0000000000800000ULL +#define CBE_MIC_FIR_ECC_MULTI_1_RESET 0x0000000000400000ULL +#define CBE_MIC_FIR_ECC_RESET_MASK 0x00000000ffff0000ULL +#define CBE_MIC_FIR_ECC_SINGLE_0_SET 0x0000000000000200ULL +#define CBE_MIC_FIR_ECC_MULTI_0_SET 0x0000000000000100ULL +#define CBE_MIC_FIR_ECC_SINGLE_1_SET 0x0000000000000080ULL +#define CBE_MIC_FIR_ECC_MULTI_1_SET 0x0000000000000040ULL +#define CBE_MIC_FIR_ECC_SET_MASK 0x000000000000ffffULL + u64 mic_fir_debug; /* 0x0238 */ + + u8 pad_0x0240_0x1000[0x1000 - 0x0240]; /* 0x0240 */ +}; + +extern struct cbe_mic_tm_regs __iomem *cbe_get_mic_tm_regs(struct device_node *np); +extern struct cbe_mic_tm_regs __iomem *cbe_get_cpu_mic_tm_regs(int cpu); + +/* some utility functions to deal with SMT */ +extern u32 cbe_get_hw_thread_id(int cpu); +extern u32 cbe_cpu_to_node(int cpu); +extern u32 cbe_node_to_cpu(int node); + +/* Init this module early */ +extern void cbe_regs_init(void); + + +#endif /* CBE_REGS_H */ diff --git a/arch/powerpc/include/asm/checksum.h b/arch/powerpc/include/asm/checksum.h new file mode 100644 index 00000000000..7cdf358337c --- /dev/null +++ b/arch/powerpc/include/asm/checksum.h @@ -0,0 +1,117 @@ +#ifndef _ASM_POWERPC_CHECKSUM_H +#define _ASM_POWERPC_CHECKSUM_H +#ifdef __KERNEL__ + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/* + * This is a version of ip_compute_csum() optimized for IP headers, + * which always checksum on 4 octet boundaries. ihl is the number + * of 32-bit words and is always >= 5. + */ +extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl); + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ +extern __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, + unsigned short len, + unsigned short proto, + __wsum sum); + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +extern __wsum csum_partial(const void *buff, int len, __wsum sum); + +/* + * Computes the checksum of a memory block at src, length len, + * and adds in "sum" (32-bit), while copying the block to dst. + * If an access exception occurs on src or dst, it stores -EFAULT + * to *src_err or *dst_err respectively (if that pointer is not + * NULL), and, for an error on src, zeroes the rest of dst. + * + * Like csum_partial, this must be called with even lengths, + * except for the last fragment. + */ +extern __wsum csum_partial_copy_generic(const void *src, void *dst, + int len, __wsum sum, + int *src_err, int *dst_err); +/* + * the same as csum_partial, but copies from src to dst while it + * checksums. + */ +#define csum_partial_copy_from_user(src, dst, len, sum, errp) \ + csum_partial_copy_generic((__force const void *)(src), (dst), (len), (sum), (errp), NULL) + +#define csum_partial_copy_nocheck(src, dst, len, sum) \ + csum_partial_copy_generic((src), (dst), (len), (sum), NULL, NULL) + + +/* + * turns a 32-bit partial checksum (e.g. from csum_partial) into a + * 1's complement 16-bit checksum. + */ +static inline __sum16 csum_fold(__wsum sum) +{ + unsigned int tmp; + + /* swap the two 16-bit halves of sum */ + __asm__("rlwinm %0,%1,16,0,31" : "=r" (tmp) : "r" (sum)); + /* if there is a carry from adding the two 16-bit halves, + it will carry from the lower half into the upper half, + giving us the correct sum in the upper half. */ + return (__force __sum16)(~((__force u32)sum + tmp) >> 16); +} + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ +static inline __sum16 ip_compute_csum(const void *buff, int len) +{ + return csum_fold(csum_partial(buff, len, 0)); +} + +static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, + unsigned short len, + unsigned short proto, + __wsum sum) +{ +#ifdef __powerpc64__ + unsigned long s = (__force u32)sum; + + s += (__force u32)saddr; + s += (__force u32)daddr; + s += proto + len; + s += (s >> 32); + return (__force __wsum) s; +#else + __asm__("\n\ + addc %0,%0,%1 \n\ + adde %0,%0,%2 \n\ + adde %0,%0,%3 \n\ + addze %0,%0 \n\ + " + : "=r" (sum) + : "r" (daddr), "r"(saddr), "r"(proto + len), "0"(sum)); + return sum; +#endif +} +#endif /* __KERNEL__ */ +#endif diff --git a/arch/powerpc/include/asm/clk_interface.h b/arch/powerpc/include/asm/clk_interface.h new file mode 100644 index 00000000000..ab1882c1e17 --- /dev/null +++ b/arch/powerpc/include/asm/clk_interface.h @@ -0,0 +1,20 @@ +#ifndef __ASM_POWERPC_CLK_INTERFACE_H +#define __ASM_POWERPC_CLK_INTERFACE_H + +#include + +struct clk_interface { + struct clk* (*clk_get) (struct device *dev, const char *id); + int (*clk_enable) (struct clk *clk); + void (*clk_disable) (struct clk *clk); + unsigned long (*clk_get_rate) (struct clk *clk); + void (*clk_put) (struct clk *clk); + long (*clk_round_rate) (struct clk *clk, unsigned long rate); + int (*clk_set_rate) (struct clk *clk, unsigned long rate); + int (*clk_set_parent) (struct clk *clk, struct clk *parent); + struct clk* (*clk_get_parent) (struct clk *clk); +}; + +extern struct clk_interface clk_functions; + +#endif /* __ASM_POWERPC_CLK_INTERFACE_H */ diff --git a/arch/powerpc/include/asm/code-patching.h b/arch/powerpc/include/asm/code-patching.h new file mode 100644 index 00000000000..107d9b915e3 --- /dev/null +++ b/arch/powerpc/include/asm/code-patching.h @@ -0,0 +1,54 @@ +#ifndef _ASM_POWERPC_CODE_PATCHING_H +#define _ASM_POWERPC_CODE_PATCHING_H + +/* + * Copyright 2008, Michael Ellerman, IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include + +#define PPC_NOP_INSTR 0x60000000 +#define PPC_LWSYNC_INSTR 0x7c2004ac + +/* Flags for create_branch: + * "b" == create_branch(addr, target, 0); + * "ba" == create_branch(addr, target, BRANCH_ABSOLUTE); + * "bl" == create_branch(addr, target, BRANCH_SET_LINK); + * "bla" == create_branch(addr, target, BRANCH_ABSOLUTE | BRANCH_SET_LINK); + */ +#define BRANCH_SET_LINK 0x1 +#define BRANCH_ABSOLUTE 0x2 + +unsigned int create_branch(const unsigned int *addr, + unsigned long target, int flags); +unsigned int create_cond_branch(const unsigned int *addr, + unsigned long target, int flags); +void patch_branch(unsigned int *addr, unsigned long target, int flags); +void patch_instruction(unsigned int *addr, unsigned int instr); + +int instr_is_relative_branch(unsigned int instr); +int instr_is_branch_to_addr(const unsigned int *instr, unsigned long addr); +unsigned long branch_target(const unsigned int *instr); +unsigned int translate_branch(const unsigned int *dest, + const unsigned int *src); + +static inline unsigned long ppc_function_entry(void *func) +{ +#ifdef CONFIG_PPC64 + /* + * On PPC64 the function pointer actually points to the function's + * descriptor. The first entry in the descriptor is the address + * of the function text. + */ + return ((func_descr_t *)func)->entry; +#else + return (unsigned long)func; +#endif +} + +#endif /* _ASM_POWERPC_CODE_PATCHING_H */ diff --git a/arch/powerpc/include/asm/compat.h b/arch/powerpc/include/asm/compat.h new file mode 100644 index 00000000000..d811a8cd7b5 --- /dev/null +++ b/arch/powerpc/include/asm/compat.h @@ -0,0 +1,214 @@ +#ifndef _ASM_POWERPC_COMPAT_H +#define _ASM_POWERPC_COMPAT_H +#ifdef __KERNEL__ +/* + * Architecture specific compatibility types + */ +#include +#include + +#define COMPAT_USER_HZ 100 + +typedef u32 compat_size_t; +typedef s32 compat_ssize_t; +typedef s32 compat_time_t; +typedef s32 compat_clock_t; +typedef s32 compat_pid_t; +typedef u32 __compat_uid_t; +typedef u32 __compat_gid_t; +typedef u32 __compat_uid32_t; +typedef u32 __compat_gid32_t; +typedef u32 compat_mode_t; +typedef u32 compat_ino_t; +typedef u32 compat_dev_t; +typedef s32 compat_off_t; +typedef s64 compat_loff_t; +typedef s16 compat_nlink_t; +typedef u16 compat_ipc_pid_t; +typedef s32 compat_daddr_t; +typedef u32 compat_caddr_t; +typedef __kernel_fsid_t compat_fsid_t; +typedef s32 compat_key_t; +typedef s32 compat_timer_t; + +typedef s32 compat_int_t; +typedef s32 compat_long_t; +typedef s64 compat_s64; +typedef u32 compat_uint_t; +typedef u32 compat_ulong_t; +typedef u64 compat_u64; + +struct compat_timespec { + compat_time_t tv_sec; + s32 tv_nsec; +}; + +struct compat_timeval { + compat_time_t tv_sec; + s32 tv_usec; +}; + +struct compat_stat { + compat_dev_t st_dev; + compat_ino_t st_ino; + compat_mode_t st_mode; + compat_nlink_t st_nlink; + __compat_uid32_t st_uid; + __compat_gid32_t st_gid; + compat_dev_t st_rdev; + compat_off_t st_size; + compat_off_t st_blksize; + compat_off_t st_blocks; + compat_time_t st_atime; + u32 st_atime_nsec; + compat_time_t st_mtime; + u32 st_mtime_nsec; + compat_time_t st_ctime; + u32 st_ctime_nsec; + u32 __unused4[2]; +}; + +struct compat_flock { + short l_type; + short l_whence; + compat_off_t l_start; + compat_off_t l_len; + compat_pid_t l_pid; +}; + +#define F_GETLK64 12 /* using 'struct flock64' */ +#define F_SETLK64 13 +#define F_SETLKW64 14 + +struct compat_flock64 { + short l_type; + short l_whence; + compat_loff_t l_start; + compat_loff_t l_len; + compat_pid_t l_pid; +}; + +struct compat_statfs { + int f_type; + int f_bsize; + int f_blocks; + int f_bfree; + int f_bavail; + int f_files; + int f_ffree; + compat_fsid_t f_fsid; + int f_namelen; /* SunOS ignores this field. */ + int f_frsize; + int f_spare[5]; +}; + +#define COMPAT_RLIM_OLD_INFINITY 0x7fffffff +#define COMPAT_RLIM_INFINITY 0xffffffff + +typedef u32 compat_old_sigset_t; + +#define _COMPAT_NSIG 64 +#define _COMPAT_NSIG_BPW 32 + +typedef u32 compat_sigset_word; + +#define COMPAT_OFF_T_MAX 0x7fffffff +#define COMPAT_LOFF_T_MAX 0x7fffffffffffffffL + +/* + * A pointer passed in from user mode. This should not + * be used for syscall parameters, just declare them + * as pointers because the syscall entry code will have + * appropriately converted them already. + */ +typedef u32 compat_uptr_t; + +static inline void __user *compat_ptr(compat_uptr_t uptr) +{ + return (void __user *)(unsigned long)uptr; +} + +static inline compat_uptr_t ptr_to_compat(void __user *uptr) +{ + return (u32)(unsigned long)uptr; +} + +static inline void __user *compat_alloc_user_space(long len) +{ + struct pt_regs *regs = current->thread.regs; + unsigned long usp = regs->gpr[1]; + + /* + * We cant access below the stack pointer in the 32bit ABI and + * can access 288 bytes in the 64bit ABI + */ + if (!(test_thread_flag(TIF_32BIT))) + usp -= 288; + + return (void __user *) (usp - len); +} + +/* + * ipc64_perm is actually 32/64bit clean but since the compat layer refers to + * it we may as well define it. + */ +struct compat_ipc64_perm { + compat_key_t key; + __compat_uid_t uid; + __compat_gid_t gid; + __compat_uid_t cuid; + __compat_gid_t cgid; + compat_mode_t mode; + unsigned int seq; + unsigned int __pad2; + unsigned long __unused1; /* yes they really are 64bit pads */ + unsigned long __unused2; +}; + +struct compat_semid64_ds { + struct compat_ipc64_perm sem_perm; + unsigned int __unused1; + compat_time_t sem_otime; + unsigned int __unused2; + compat_time_t sem_ctime; + compat_ulong_t sem_nsems; + compat_ulong_t __unused3; + compat_ulong_t __unused4; +}; + +struct compat_msqid64_ds { + struct compat_ipc64_perm msg_perm; + unsigned int __unused1; + compat_time_t msg_stime; + unsigned int __unused2; + compat_time_t msg_rtime; + unsigned int __unused3; + compat_time_t msg_ctime; + compat_ulong_t msg_cbytes; + compat_ulong_t msg_qnum; + compat_ulong_t msg_qbytes; + compat_pid_t msg_lspid; + compat_pid_t msg_lrpid; + compat_ulong_t __unused4; + compat_ulong_t __unused5; +}; + +struct compat_shmid64_ds { + struct compat_ipc64_perm shm_perm; + unsigned int __unused1; + compat_time_t shm_atime; + unsigned int __unused2; + compat_time_t shm_dtime; + unsigned int __unused3; + compat_time_t shm_ctime; + unsigned int __unused4; + compat_size_t shm_segsz; + compat_pid_t shm_cpid; + compat_pid_t shm_lpid; + compat_ulong_t shm_nattch; + compat_ulong_t __unused5; + compat_ulong_t __unused6; +}; + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_COMPAT_H */ diff --git a/arch/powerpc/include/asm/cpm.h b/arch/powerpc/include/asm/cpm.h new file mode 100644 index 00000000000..24d79e3abd8 --- /dev/null +++ b/arch/powerpc/include/asm/cpm.h @@ -0,0 +1,106 @@ +#ifndef __CPM_H +#define __CPM_H + +#include +#include +#include + +/* Opcodes common to CPM1 and CPM2 +*/ +#define CPM_CR_INIT_TRX ((ushort)0x0000) +#define CPM_CR_INIT_RX ((ushort)0x0001) +#define CPM_CR_INIT_TX ((ushort)0x0002) +#define CPM_CR_HUNT_MODE ((ushort)0x0003) +#define CPM_CR_STOP_TX ((ushort)0x0004) +#define CPM_CR_GRA_STOP_TX ((ushort)0x0005) +#define CPM_CR_RESTART_TX ((ushort)0x0006) +#define CPM_CR_CLOSE_RX_BD ((ushort)0x0007) +#define CPM_CR_SET_GADDR ((ushort)0x0008) +#define CPM_CR_SET_TIMER ((ushort)0x0008) +#define CPM_CR_STOP_IDMA ((ushort)0x000b) + +/* Buffer descriptors used by many of the CPM protocols. */ +typedef struct cpm_buf_desc { + ushort cbd_sc; /* Status and Control */ + ushort cbd_datlen; /* Data length in buffer */ + uint cbd_bufaddr; /* Buffer address in host memory */ +} cbd_t; + +/* Buffer descriptor control/status used by serial + */ + +#define BD_SC_EMPTY (0x8000) /* Receive is empty */ +#define BD_SC_READY (0x8000) /* Transmit is ready */ +#define BD_SC_WRAP (0x2000) /* Last buffer descriptor */ +#define BD_SC_INTRPT (0x1000) /* Interrupt on change */ +#define BD_SC_LAST (0x0800) /* Last buffer in frame */ +#define BD_SC_TC (0x0400) /* Transmit CRC */ +#define BD_SC_CM (0x0200) /* Continous mode */ +#define BD_SC_ID (0x0100) /* Rec'd too many idles */ +#define BD_SC_P (0x0100) /* xmt preamble */ +#define BD_SC_BR (0x0020) /* Break received */ +#define BD_SC_FR (0x0010) /* Framing error */ +#define BD_SC_PR (0x0008) /* Parity error */ +#define BD_SC_NAK (0x0004) /* NAK - did not respond */ +#define BD_SC_OV (0x0002) /* Overrun */ +#define BD_SC_UN (0x0002) /* Underrun */ +#define BD_SC_CD (0x0001) /* */ +#define BD_SC_CL (0x0001) /* Collision */ + +/* Buffer descriptor control/status used by Ethernet receive. + * Common to SCC and FCC. + */ +#define BD_ENET_RX_EMPTY (0x8000) +#define BD_ENET_RX_WRAP (0x2000) +#define BD_ENET_RX_INTR (0x1000) +#define BD_ENET_RX_LAST (0x0800) +#define BD_ENET_RX_FIRST (0x0400) +#define BD_ENET_RX_MISS (0x0100) +#define BD_ENET_RX_BC (0x0080) /* FCC Only */ +#define BD_ENET_RX_MC (0x0040) /* FCC Only */ +#define BD_ENET_RX_LG (0x0020) +#define BD_ENET_RX_NO (0x0010) +#define BD_ENET_RX_SH (0x0008) +#define BD_ENET_RX_CR (0x0004) +#define BD_ENET_RX_OV (0x0002) +#define BD_ENET_RX_CL (0x0001) +#define BD_ENET_RX_STATS (0x01ff) /* All status bits */ + +/* Buffer descriptor control/status used by Ethernet transmit. + * Common to SCC and FCC. + */ +#define BD_ENET_TX_READY (0x8000) +#define BD_ENET_TX_PAD (0x4000) +#define BD_ENET_TX_WRAP (0x2000) +#define BD_ENET_TX_INTR (0x1000) +#define BD_ENET_TX_LAST (0x0800) +#define BD_ENET_TX_TC (0x0400) +#define BD_ENET_TX_DEF (0x0200) +#define BD_ENET_TX_HB (0x0100) +#define BD_ENET_TX_LC (0x0080) +#define BD_ENET_TX_RL (0x0040) +#define BD_ENET_TX_RCMASK (0x003c) +#define BD_ENET_TX_UN (0x0002) +#define BD_ENET_TX_CSL (0x0001) +#define BD_ENET_TX_STATS (0x03ff) /* All status bits */ + +/* Buffer descriptor control/status used by Transparent mode SCC. + */ +#define BD_SCC_TX_LAST (0x0800) + +/* Buffer descriptor control/status used by I2C. + */ +#define BD_I2C_START (0x0400) + +int cpm_muram_init(void); +unsigned long cpm_muram_alloc(unsigned long size, unsigned long align); +int cpm_muram_free(unsigned long offset); +unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size); +void __iomem *cpm_muram_addr(unsigned long offset); +unsigned long cpm_muram_offset(void __iomem *addr); +dma_addr_t cpm_muram_dma(void __iomem *addr); +int cpm_command(u32 command, u8 opcode); + +int cpm2_gpiochip_add32(struct device_node *np); + +#endif diff --git a/arch/powerpc/include/asm/cpm1.h b/arch/powerpc/include/asm/cpm1.h new file mode 100644 index 00000000000..2ff798744c1 --- /dev/null +++ b/arch/powerpc/include/asm/cpm1.h @@ -0,0 +1,652 @@ +/* + * MPC8xx Communication Processor Module. + * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) + * + * This file contains structures and information for the communication + * processor channels. Some CPM control and status is available + * throught the MPC8xx internal memory map. See immap.h for details. + * This file only contains what I need for the moment, not the total + * CPM capabilities. I (or someone else) will add definitions as they + * are needed. -- Dan + * + * On the MBX board, EPPC-Bug loads CPM microcode into the first 512 + * bytes of the DP RAM and relocates the I2C parameter area to the + * IDMA1 space. The remaining DP RAM is available for buffer descriptors + * or other use. + */ +#ifndef __CPM1__ +#define __CPM1__ + +#include +#include +#include + +/* CPM Command register. +*/ +#define CPM_CR_RST ((ushort)0x8000) +#define CPM_CR_OPCODE ((ushort)0x0f00) +#define CPM_CR_CHAN ((ushort)0x00f0) +#define CPM_CR_FLG ((ushort)0x0001) + +/* Channel numbers. +*/ +#define CPM_CR_CH_SCC1 ((ushort)0x0000) +#define CPM_CR_CH_I2C ((ushort)0x0001) /* I2C and IDMA1 */ +#define CPM_CR_CH_SCC2 ((ushort)0x0004) +#define CPM_CR_CH_SPI ((ushort)0x0005) /* SPI / IDMA2 / Timers */ +#define CPM_CR_CH_TIMER CPM_CR_CH_SPI +#define CPM_CR_CH_SCC3 ((ushort)0x0008) +#define CPM_CR_CH_SMC1 ((ushort)0x0009) /* SMC1 / DSP1 */ +#define CPM_CR_CH_SCC4 ((ushort)0x000c) +#define CPM_CR_CH_SMC2 ((ushort)0x000d) /* SMC2 / DSP2 */ + +#define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4)) + +/* Export the base address of the communication processor registers + * and dual port ram. + */ +extern cpm8xx_t __iomem *cpmp; /* Pointer to comm processor */ + +#define cpm_dpalloc cpm_muram_alloc +#define cpm_dpfree cpm_muram_free +#define cpm_dpram_addr cpm_muram_addr +#define cpm_dpram_phys cpm_muram_dma + +extern void cpm_setbrg(uint brg, uint rate); + +extern void cpm_load_patch(cpm8xx_t *cp); + +extern void cpm_reset(void); + +/* Parameter RAM offsets. +*/ +#define PROFF_SCC1 ((uint)0x0000) +#define PROFF_IIC ((uint)0x0080) +#define PROFF_SCC2 ((uint)0x0100) +#define PROFF_SPI ((uint)0x0180) +#define PROFF_SCC3 ((uint)0x0200) +#define PROFF_SMC1 ((uint)0x0280) +#define PROFF_SCC4 ((uint)0x0300) +#define PROFF_SMC2 ((uint)0x0380) + +/* Define enough so I can at least use the serial port as a UART. + * The MBX uses SMC1 as the host serial port. + */ +typedef struct smc_uart { + ushort smc_rbase; /* Rx Buffer descriptor base address */ + ushort smc_tbase; /* Tx Buffer descriptor base address */ + u_char smc_rfcr; /* Rx function code */ + u_char smc_tfcr; /* Tx function code */ + ushort smc_mrblr; /* Max receive buffer length */ + uint smc_rstate; /* Internal */ + uint smc_idp; /* Internal */ + ushort smc_rbptr; /* Internal */ + ushort smc_ibc; /* Internal */ + uint smc_rxtmp; /* Internal */ + uint smc_tstate; /* Internal */ + uint smc_tdp; /* Internal */ + ushort smc_tbptr; /* Internal */ + ushort smc_tbc; /* Internal */ + uint smc_txtmp; /* Internal */ + ushort smc_maxidl; /* Maximum idle characters */ + ushort smc_tmpidl; /* Temporary idle counter */ + ushort smc_brklen; /* Last received break length */ + ushort smc_brkec; /* rcv'd break condition counter */ + ushort smc_brkcr; /* xmt break count register */ + ushort smc_rmask; /* Temporary bit mask */ + char res1[8]; /* Reserved */ + ushort smc_rpbase; /* Relocation pointer */ +} smc_uart_t; + +/* Function code bits. +*/ +#define SMC_EB ((u_char)0x10) /* Set big endian byte order */ + +/* SMC uart mode register. +*/ +#define SMCMR_REN ((ushort)0x0001) +#define SMCMR_TEN ((ushort)0x0002) +#define SMCMR_DM ((ushort)0x000c) +#define SMCMR_SM_GCI ((ushort)0x0000) +#define SMCMR_SM_UART ((ushort)0x0020) +#define SMCMR_SM_TRANS ((ushort)0x0030) +#define SMCMR_SM_MASK ((ushort)0x0030) +#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */ +#define SMCMR_REVD SMCMR_PM_EVEN +#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */ +#define SMCMR_BS SMCMR_PEN +#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */ +#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */ +#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK) + +/* SMC2 as Centronics parallel printer. It is half duplex, in that + * it can only receive or transmit. The parameter ram values for + * each direction are either unique or properly overlap, so we can + * include them in one structure. + */ +typedef struct smc_centronics { + ushort scent_rbase; + ushort scent_tbase; + u_char scent_cfcr; + u_char scent_smask; + ushort scent_mrblr; + uint scent_rstate; + uint scent_r_ptr; + ushort scent_rbptr; + ushort scent_r_cnt; + uint scent_rtemp; + uint scent_tstate; + uint scent_t_ptr; + ushort scent_tbptr; + ushort scent_t_cnt; + uint scent_ttemp; + ushort scent_max_sl; + ushort scent_sl_cnt; + ushort scent_character1; + ushort scent_character2; + ushort scent_character3; + ushort scent_character4; + ushort scent_character5; + ushort scent_character6; + ushort scent_character7; + ushort scent_character8; + ushort scent_rccm; + ushort scent_rccr; +} smc_cent_t; + +/* Centronics Status Mask Register. +*/ +#define SMC_CENT_F ((u_char)0x08) +#define SMC_CENT_PE ((u_char)0x04) +#define SMC_CENT_S ((u_char)0x02) + +/* SMC Event and Mask register. +*/ +#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */ +#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */ +#define SMCM_TXE ((unsigned char)0x10) /* When in Transparent Mode */ +#define SMCM_BSY ((unsigned char)0x04) +#define SMCM_TX ((unsigned char)0x02) +#define SMCM_RX ((unsigned char)0x01) + +/* Baud rate generators. +*/ +#define CPM_BRG_RST ((uint)0x00020000) +#define CPM_BRG_EN ((uint)0x00010000) +#define CPM_BRG_EXTC_INT ((uint)0x00000000) +#define CPM_BRG_EXTC_CLK2 ((uint)0x00004000) +#define CPM_BRG_EXTC_CLK6 ((uint)0x00008000) +#define CPM_BRG_ATB ((uint)0x00002000) +#define CPM_BRG_CD_MASK ((uint)0x00001ffe) +#define CPM_BRG_DIV16 ((uint)0x00000001) + +/* SI Clock Route Register +*/ +#define SICR_RCLK_SCC1_BRG1 ((uint)0x00000000) +#define SICR_TCLK_SCC1_BRG1 ((uint)0x00000000) +#define SICR_RCLK_SCC2_BRG2 ((uint)0x00000800) +#define SICR_TCLK_SCC2_BRG2 ((uint)0x00000100) +#define SICR_RCLK_SCC3_BRG3 ((uint)0x00100000) +#define SICR_TCLK_SCC3_BRG3 ((uint)0x00020000) +#define SICR_RCLK_SCC4_BRG4 ((uint)0x18000000) +#define SICR_TCLK_SCC4_BRG4 ((uint)0x03000000) + +/* SCCs. +*/ +#define SCC_GSMRH_IRP ((uint)0x00040000) +#define SCC_GSMRH_GDE ((uint)0x00010000) +#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000) +#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000) +#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000) +#define SCC_GSMRH_REVD ((uint)0x00002000) +#define SCC_GSMRH_TRX ((uint)0x00001000) +#define SCC_GSMRH_TTX ((uint)0x00000800) +#define SCC_GSMRH_CDP ((uint)0x00000400) +#define SCC_GSMRH_CTSP ((uint)0x00000200) +#define SCC_GSMRH_CDS ((uint)0x00000100) +#define SCC_GSMRH_CTSS ((uint)0x00000080) +#define SCC_GSMRH_TFL ((uint)0x00000040) +#define SCC_GSMRH_RFW ((uint)0x00000020) +#define SCC_GSMRH_TXSY ((uint)0x00000010) +#define SCC_GSMRH_SYNL16 ((uint)0x0000000c) +#define SCC_GSMRH_SYNL8 ((uint)0x00000008) +#define SCC_GSMRH_SYNL4 ((uint)0x00000004) +#define SCC_GSMRH_RTSM ((uint)0x00000002) +#define SCC_GSMRH_RSYN ((uint)0x00000001) + +#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */ +#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000) +#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000) +#define SCC_GSMRL_EDGE_POS ((uint)0x20000000) +#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000) +#define SCC_GSMRL_TCI ((uint)0x10000000) +#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000) +#define SCC_GSMRL_TSNC_4 ((uint)0x08000000) +#define SCC_GSMRL_TSNC_14 ((uint)0x04000000) +#define SCC_GSMRL_TSNC_INF ((uint)0x00000000) +#define SCC_GSMRL_RINV ((uint)0x02000000) +#define SCC_GSMRL_TINV ((uint)0x01000000) +#define SCC_GSMRL_TPL_128 ((uint)0x00c00000) +#define SCC_GSMRL_TPL_64 ((uint)0x00a00000) +#define SCC_GSMRL_TPL_48 ((uint)0x00800000) +#define SCC_GSMRL_TPL_32 ((uint)0x00600000) +#define SCC_GSMRL_TPL_16 ((uint)0x00400000) +#define SCC_GSMRL_TPL_8 ((uint)0x00200000) +#define SCC_GSMRL_TPL_NONE ((uint)0x00000000) +#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000) +#define SCC_GSMRL_TPP_01 ((uint)0x00100000) +#define SCC_GSMRL_TPP_10 ((uint)0x00080000) +#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000) +#define SCC_GSMRL_TEND ((uint)0x00040000) +#define SCC_GSMRL_TDCR_32 ((uint)0x00030000) +#define SCC_GSMRL_TDCR_16 ((uint)0x00020000) +#define SCC_GSMRL_TDCR_8 ((uint)0x00010000) +#define SCC_GSMRL_TDCR_1 ((uint)0x00000000) +#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000) +#define SCC_GSMRL_RDCR_16 ((uint)0x00008000) +#define SCC_GSMRL_RDCR_8 ((uint)0x00004000) +#define SCC_GSMRL_RDCR_1 ((uint)0x00000000) +#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000) +#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000) +#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000) +#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800) +#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000) +#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600) +#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400) +#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200) +#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100) +#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000) +#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */ +#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080) +#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040) +#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000) +#define SCC_GSMRL_ENR ((uint)0x00000020) +#define SCC_GSMRL_ENT ((uint)0x00000010) +#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c) +#define SCC_GSMRL_MODE_QMC ((uint)0x0000000a) +#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009) +#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008) +#define SCC_GSMRL_MODE_V14 ((uint)0x00000007) +#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006) +#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005) +#define SCC_GSMRL_MODE_UART ((uint)0x00000004) +#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003) +#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002) +#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000) + +#define SCC_TODR_TOD ((ushort)0x8000) + +/* SCC Event and Mask register. +*/ +#define SCCM_TXE ((unsigned char)0x10) +#define SCCM_BSY ((unsigned char)0x04) +#define SCCM_TX ((unsigned char)0x02) +#define SCCM_RX ((unsigned char)0x01) + +typedef struct scc_param { + ushort scc_rbase; /* Rx Buffer descriptor base address */ + ushort scc_tbase; /* Tx Buffer descriptor base address */ + u_char scc_rfcr; /* Rx function code */ + u_char scc_tfcr; /* Tx function code */ + ushort scc_mrblr; /* Max receive buffer length */ + uint scc_rstate; /* Internal */ + uint scc_idp; /* Internal */ + ushort scc_rbptr; /* Internal */ + ushort scc_ibc; /* Internal */ + uint scc_rxtmp; /* Internal */ + uint scc_tstate; /* Internal */ + uint scc_tdp; /* Internal */ + ushort scc_tbptr; /* Internal */ + ushort scc_tbc; /* Internal */ + uint scc_txtmp; /* Internal */ + uint scc_rcrc; /* Internal */ + uint scc_tcrc; /* Internal */ +} sccp_t; + +/* Function code bits. +*/ +#define SCC_EB ((u_char)0x10) /* Set big endian byte order */ + +/* CPM Ethernet through SCCx. + */ +typedef struct scc_enet { + sccp_t sen_genscc; + uint sen_cpres; /* Preset CRC */ + uint sen_cmask; /* Constant mask for CRC */ + uint sen_crcec; /* CRC Error counter */ + uint sen_alec; /* alignment error counter */ + uint sen_disfc; /* discard frame counter */ + ushort sen_pads; /* Tx short frame pad character */ + ushort sen_retlim; /* Retry limit threshold */ + ushort sen_retcnt; /* Retry limit counter */ + ushort sen_maxflr; /* maximum frame length register */ + ushort sen_minflr; /* minimum frame length register */ + ushort sen_maxd1; /* maximum DMA1 length */ + ushort sen_maxd2; /* maximum DMA2 length */ + ushort sen_maxd; /* Rx max DMA */ + ushort sen_dmacnt; /* Rx DMA counter */ + ushort sen_maxb; /* Max BD byte count */ + ushort sen_gaddr1; /* Group address filter */ + ushort sen_gaddr2; + ushort sen_gaddr3; + ushort sen_gaddr4; + uint sen_tbuf0data0; /* Save area 0 - current frame */ + uint sen_tbuf0data1; /* Save area 1 - current frame */ + uint sen_tbuf0rba; /* Internal */ + uint sen_tbuf0crc; /* Internal */ + ushort sen_tbuf0bcnt; /* Internal */ + ushort sen_paddrh; /* physical address (MSB) */ + ushort sen_paddrm; + ushort sen_paddrl; /* physical address (LSB) */ + ushort sen_pper; /* persistence */ + ushort sen_rfbdptr; /* Rx first BD pointer */ + ushort sen_tfbdptr; /* Tx first BD pointer */ + ushort sen_tlbdptr; /* Tx last BD pointer */ + uint sen_tbuf1data0; /* Save area 0 - current frame */ + uint sen_tbuf1data1; /* Save area 1 - current frame */ + uint sen_tbuf1rba; /* Internal */ + uint sen_tbuf1crc; /* Internal */ + ushort sen_tbuf1bcnt; /* Internal */ + ushort sen_txlen; /* Tx Frame length counter */ + ushort sen_iaddr1; /* Individual address filter */ + ushort sen_iaddr2; + ushort sen_iaddr3; + ushort sen_iaddr4; + ushort sen_boffcnt; /* Backoff counter */ + + /* NOTE: Some versions of the manual have the following items + * incorrectly documented. Below is the proper order. + */ + ushort sen_taddrh; /* temp address (MSB) */ + ushort sen_taddrm; + ushort sen_taddrl; /* temp address (LSB) */ +} scc_enet_t; + +/* SCC Event register as used by Ethernet. +*/ +#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ +#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */ +#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */ +#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */ +#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ +#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */ + +/* SCC Mode Register (PMSR) as used by Ethernet. +*/ +#define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */ +#define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */ +#define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */ +#define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */ +#define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */ +#define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */ +#define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */ +#define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */ +#define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */ +#define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */ +#define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */ +#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */ +#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */ + +/* SCC as UART +*/ +typedef struct scc_uart { + sccp_t scc_genscc; + char res1[8]; /* Reserved */ + ushort scc_maxidl; /* Maximum idle chars */ + ushort scc_idlc; /* temp idle counter */ + ushort scc_brkcr; /* Break count register */ + ushort scc_parec; /* receive parity error counter */ + ushort scc_frmec; /* receive framing error counter */ + ushort scc_nosec; /* receive noise counter */ + ushort scc_brkec; /* receive break condition counter */ + ushort scc_brkln; /* last received break length */ + ushort scc_uaddr1; /* UART address character 1 */ + ushort scc_uaddr2; /* UART address character 2 */ + ushort scc_rtemp; /* Temp storage */ + ushort scc_toseq; /* Transmit out of sequence char */ + ushort scc_char1; /* control character 1 */ + ushort scc_char2; /* control character 2 */ + ushort scc_char3; /* control character 3 */ + ushort scc_char4; /* control character 4 */ + ushort scc_char5; /* control character 5 */ + ushort scc_char6; /* control character 6 */ + ushort scc_char7; /* control character 7 */ + ushort scc_char8; /* control character 8 */ + ushort scc_rccm; /* receive control character mask */ + ushort scc_rccr; /* receive control character register */ + ushort scc_rlbc; /* receive last break character */ +} scc_uart_t; + +/* SCC Event and Mask registers when it is used as a UART. +*/ +#define UART_SCCM_GLR ((ushort)0x1000) +#define UART_SCCM_GLT ((ushort)0x0800) +#define UART_SCCM_AB ((ushort)0x0200) +#define UART_SCCM_IDL ((ushort)0x0100) +#define UART_SCCM_GRA ((ushort)0x0080) +#define UART_SCCM_BRKE ((ushort)0x0040) +#define UART_SCCM_BRKS ((ushort)0x0020) +#define UART_SCCM_CCR ((ushort)0x0008) +#define UART_SCCM_BSY ((ushort)0x0004) +#define UART_SCCM_TX ((ushort)0x0002) +#define UART_SCCM_RX ((ushort)0x0001) + +/* The SCC PMSR when used as a UART. +*/ +#define SCU_PSMR_FLC ((ushort)0x8000) +#define SCU_PSMR_SL ((ushort)0x4000) +#define SCU_PSMR_CL ((ushort)0x3000) +#define SCU_PSMR_UM ((ushort)0x0c00) +#define SCU_PSMR_FRZ ((ushort)0x0200) +#define SCU_PSMR_RZS ((ushort)0x0100) +#define SCU_PSMR_SYN ((ushort)0x0080) +#define SCU_PSMR_DRT ((ushort)0x0040) +#define SCU_PSMR_PEN ((ushort)0x0010) +#define SCU_PSMR_RPM ((ushort)0x000c) +#define SCU_PSMR_REVP ((ushort)0x0008) +#define SCU_PSMR_TPM ((ushort)0x0003) +#define SCU_PSMR_TEVP ((ushort)0x0002) + +/* CPM Transparent mode SCC. + */ +typedef struct scc_trans { + sccp_t st_genscc; + uint st_cpres; /* Preset CRC */ + uint st_cmask; /* Constant mask for CRC */ +} scc_trans_t; + +/* IIC parameter RAM. +*/ +typedef struct iic { + ushort iic_rbase; /* Rx Buffer descriptor base address */ + ushort iic_tbase; /* Tx Buffer descriptor base address */ + u_char iic_rfcr; /* Rx function code */ + u_char iic_tfcr; /* Tx function code */ + ushort iic_mrblr; /* Max receive buffer length */ + uint iic_rstate; /* Internal */ + uint iic_rdp; /* Internal */ + ushort iic_rbptr; /* Internal */ + ushort iic_rbc; /* Internal */ + uint iic_rxtmp; /* Internal */ + uint iic_tstate; /* Internal */ + uint iic_tdp; /* Internal */ + ushort iic_tbptr; /* Internal */ + ushort iic_tbc; /* Internal */ + uint iic_txtmp; /* Internal */ + char res1[4]; /* Reserved */ + ushort iic_rpbase; /* Relocation pointer */ + char res2[2]; /* Reserved */ +} iic_t; + +/* SPI parameter RAM. +*/ +typedef struct spi { + ushort spi_rbase; /* Rx Buffer descriptor base address */ + ushort spi_tbase; /* Tx Buffer descriptor base address */ + u_char spi_rfcr; /* Rx function code */ + u_char spi_tfcr; /* Tx function code */ + ushort spi_mrblr; /* Max receive buffer length */ + uint spi_rstate; /* Internal */ + uint spi_rdp; /* Internal */ + ushort spi_rbptr; /* Internal */ + ushort spi_rbc; /* Internal */ + uint spi_rxtmp; /* Internal */ + uint spi_tstate; /* Internal */ + uint spi_tdp; /* Internal */ + ushort spi_tbptr; /* Internal */ + ushort spi_tbc; /* Internal */ + uint spi_txtmp; /* Internal */ + uint spi_res; + ushort spi_rpbase; /* Relocation pointer */ + ushort spi_res2; +} spi_t; + +/* SPI Mode register. +*/ +#define SPMODE_LOOP ((ushort)0x4000) /* Loopback */ +#define SPMODE_CI ((ushort)0x2000) /* Clock Invert */ +#define SPMODE_CP ((ushort)0x1000) /* Clock Phase */ +#define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */ +#define SPMODE_REV ((ushort)0x0400) /* Reversed Data */ +#define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */ +#define SPMODE_EN ((ushort)0x0100) /* Enable */ +#define SPMODE_LENMSK ((ushort)0x00f0) /* character length */ +#define SPMODE_LEN4 ((ushort)0x0030) /* 4 bits per char */ +#define SPMODE_LEN8 ((ushort)0x0070) /* 8 bits per char */ +#define SPMODE_LEN16 ((ushort)0x00f0) /* 16 bits per char */ +#define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */ + +/* SPIE fields */ +#define SPIE_MME 0x20 +#define SPIE_TXE 0x10 +#define SPIE_BSY 0x04 +#define SPIE_TXB 0x02 +#define SPIE_RXB 0x01 + +/* + * RISC Controller Configuration Register definitons + */ +#define RCCR_TIME 0x8000 /* RISC Timer Enable */ +#define RCCR_TIMEP(t) (((t) & 0x3F)<<8) /* RISC Timer Period */ +#define RCCR_TIME_MASK 0x00FF /* not RISC Timer related bits */ + +/* RISC Timer Parameter RAM offset */ +#define PROFF_RTMR ((uint)0x01B0) + +typedef struct risc_timer_pram { + unsigned short tm_base; /* RISC Timer Table Base Address */ + unsigned short tm_ptr; /* RISC Timer Table Pointer (internal) */ + unsigned short r_tmr; /* RISC Timer Mode Register */ + unsigned short r_tmv; /* RISC Timer Valid Register */ + unsigned long tm_cmd; /* RISC Timer Command Register */ + unsigned long tm_cnt; /* RISC Timer Internal Count */ +} rt_pram_t; + +/* Bits in RISC Timer Command Register */ +#define TM_CMD_VALID 0x80000000 /* Valid - Enables the timer */ +#define TM_CMD_RESTART 0x40000000 /* Restart - for automatic restart */ +#define TM_CMD_PWM 0x20000000 /* Run in Pulse Width Modulation Mode */ +#define TM_CMD_NUM(n) (((n)&0xF)<<16) /* Timer Number */ +#define TM_CMD_PERIOD(p) ((p)&0xFFFF) /* Timer Period */ + +/* CPM interrupts. There are nearly 32 interrupts generated by CPM + * channels or devices. All of these are presented to the PPC core + * as a single interrupt. The CPM interrupt handler dispatches its + * own handlers, in a similar fashion to the PPC core handler. We + * use the table as defined in the manuals (i.e. no special high + * priority and SCC1 == SCCa, etc...). + */ +#define CPMVEC_NR 32 +#define CPMVEC_PIO_PC15 ((ushort)0x1f) +#define CPMVEC_SCC1 ((ushort)0x1e) +#define CPMVEC_SCC2 ((ushort)0x1d) +#define CPMVEC_SCC3 ((ushort)0x1c) +#define CPMVEC_SCC4 ((ushort)0x1b) +#define CPMVEC_PIO_PC14 ((ushort)0x1a) +#define CPMVEC_TIMER1 ((ushort)0x19) +#define CPMVEC_PIO_PC13 ((ushort)0x18) +#define CPMVEC_PIO_PC12 ((ushort)0x17) +#define CPMVEC_SDMA_CB_ERR ((ushort)0x16) +#define CPMVEC_IDMA1 ((ushort)0x15) +#define CPMVEC_IDMA2 ((ushort)0x14) +#define CPMVEC_TIMER2 ((ushort)0x12) +#define CPMVEC_RISCTIMER ((ushort)0x11) +#define CPMVEC_I2C ((ushort)0x10) +#define CPMVEC_PIO_PC11 ((ushort)0x0f) +#define CPMVEC_PIO_PC10 ((ushort)0x0e) +#define CPMVEC_TIMER3 ((ushort)0x0c) +#define CPMVEC_PIO_PC9 ((ushort)0x0b) +#define CPMVEC_PIO_PC8 ((ushort)0x0a) +#define CPMVEC_PIO_PC7 ((ushort)0x09) +#define CPMVEC_TIMER4 ((ushort)0x07) +#define CPMVEC_PIO_PC6 ((ushort)0x06) +#define CPMVEC_SPI ((ushort)0x05) +#define CPMVEC_SMC1 ((ushort)0x04) +#define CPMVEC_SMC2 ((ushort)0x03) +#define CPMVEC_PIO_PC5 ((ushort)0x02) +#define CPMVEC_PIO_PC4 ((ushort)0x01) +#define CPMVEC_ERROR ((ushort)0x00) + +/* CPM interrupt configuration vector. +*/ +#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */ +#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */ +#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */ +#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */ +#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */ +#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */ +#define CICR_IEN ((uint)0x00000080) /* Int. enable */ +#define CICR_SPS ((uint)0x00000001) /* SCC Spread */ + +#define IMAP_ADDR (get_immrbase()) + +#define CPM_PIN_INPUT 0 +#define CPM_PIN_OUTPUT 1 +#define CPM_PIN_PRIMARY 0 +#define CPM_PIN_SECONDARY 2 +#define CPM_PIN_GPIO 4 +#define CPM_PIN_OPENDRAIN 8 + +enum cpm_port { + CPM_PORTA, + CPM_PORTB, + CPM_PORTC, + CPM_PORTD, + CPM_PORTE, +}; + +void cpm1_set_pin(enum cpm_port port, int pin, int flags); + +enum cpm_clk_dir { + CPM_CLK_RX, + CPM_CLK_TX, + CPM_CLK_RTX +}; + +enum cpm_clk_target { + CPM_CLK_SCC1, + CPM_CLK_SCC2, + CPM_CLK_SCC3, + CPM_CLK_SCC4, + CPM_CLK_SMC1, + CPM_CLK_SMC2, +}; + +enum cpm_clk { + CPM_BRG1, /* Baud Rate Generator 1 */ + CPM_BRG2, /* Baud Rate Generator 2 */ + CPM_BRG3, /* Baud Rate Generator 3 */ + CPM_BRG4, /* Baud Rate Generator 4 */ + CPM_CLK1, /* Clock 1 */ + CPM_CLK2, /* Clock 2 */ + CPM_CLK3, /* Clock 3 */ + CPM_CLK4, /* Clock 4 */ + CPM_CLK5, /* Clock 5 */ + CPM_CLK6, /* Clock 6 */ + CPM_CLK7, /* Clock 7 */ + CPM_CLK8, /* Clock 8 */ +}; + +int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode); + +#endif /* __CPM1__ */ diff --git a/arch/powerpc/include/asm/cpm2.h b/arch/powerpc/include/asm/cpm2.h new file mode 100644 index 00000000000..2a6fa0183ac --- /dev/null +++ b/arch/powerpc/include/asm/cpm2.h @@ -0,0 +1,1195 @@ +/* + * Communication Processor Module v2. + * + * This file contains structures and information for the communication + * processor channels found in the dual port RAM or parameter RAM. + * All CPM control and status is available through the CPM2 internal + * memory map. See immap_cpm2.h for details. + */ +#ifdef __KERNEL__ +#ifndef __CPM2__ +#define __CPM2__ + +#include +#include +#include + +#ifdef CONFIG_PPC_85xx +#define CPM_MAP_ADDR (get_immrbase() + 0x80000) +#endif + +/* CPM Command register. +*/ +#define CPM_CR_RST ((uint)0x80000000) +#define CPM_CR_PAGE ((uint)0x7c000000) +#define CPM_CR_SBLOCK ((uint)0x03e00000) +#define CPM_CR_FLG ((uint)0x00010000) +#define CPM_CR_MCN ((uint)0x00003fc0) +#define CPM_CR_OPCODE ((uint)0x0000000f) + +/* Device sub-block and page codes. +*/ +#define CPM_CR_SCC1_SBLOCK (0x04) +#define CPM_CR_SCC2_SBLOCK (0x05) +#define CPM_CR_SCC3_SBLOCK (0x06) +#define CPM_CR_SCC4_SBLOCK (0x07) +#define CPM_CR_SMC1_SBLOCK (0x08) +#define CPM_CR_SMC2_SBLOCK (0x09) +#define CPM_CR_SPI_SBLOCK (0x0a) +#define CPM_CR_I2C_SBLOCK (0x0b) +#define CPM_CR_TIMER_SBLOCK (0x0f) +#define CPM_CR_RAND_SBLOCK (0x0e) +#define CPM_CR_FCC1_SBLOCK (0x10) +#define CPM_CR_FCC2_SBLOCK (0x11) +#define CPM_CR_FCC3_SBLOCK (0x12) +#define CPM_CR_IDMA1_SBLOCK (0x14) +#define CPM_CR_IDMA2_SBLOCK (0x15) +#define CPM_CR_IDMA3_SBLOCK (0x16) +#define CPM_CR_IDMA4_SBLOCK (0x17) +#define CPM_CR_MCC1_SBLOCK (0x1c) + +#define CPM_CR_FCC_SBLOCK(x) (x + 0x10) + +#define CPM_CR_SCC1_PAGE (0x00) +#define CPM_CR_SCC2_PAGE (0x01) +#define CPM_CR_SCC3_PAGE (0x02) +#define CPM_CR_SCC4_PAGE (0x03) +#define CPM_CR_SMC1_PAGE (0x07) +#define CPM_CR_SMC2_PAGE (0x08) +#define CPM_CR_SPI_PAGE (0x09) +#define CPM_CR_I2C_PAGE (0x0a) +#define CPM_CR_TIMER_PAGE (0x0a) +#define CPM_CR_RAND_PAGE (0x0a) +#define CPM_CR_FCC1_PAGE (0x04) +#define CPM_CR_FCC2_PAGE (0x05) +#define CPM_CR_FCC3_PAGE (0x06) +#define CPM_CR_IDMA1_PAGE (0x07) +#define CPM_CR_IDMA2_PAGE (0x08) +#define CPM_CR_IDMA3_PAGE (0x09) +#define CPM_CR_IDMA4_PAGE (0x0a) +#define CPM_CR_MCC1_PAGE (0x07) +#define CPM_CR_MCC2_PAGE (0x08) + +#define CPM_CR_FCC_PAGE(x) (x + 0x04) + +/* CPM2-specific opcodes (see cpm.h for common opcodes) +*/ +#define CPM_CR_START_IDMA ((ushort)0x0009) + +#define mk_cr_cmd(PG, SBC, MCN, OP) \ + ((PG << 26) | (SBC << 21) | (MCN << 6) | OP) + +/* The number of pages of host memory we allocate for CPM. This is + * done early in kernel initialization to get physically contiguous + * pages. + */ +#define NUM_CPM_HOST_PAGES 2 + +/* Export the base address of the communication processor registers + * and dual port ram. + */ +extern cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor */ + +#define cpm_dpalloc cpm_muram_alloc +#define cpm_dpfree cpm_muram_free +#define cpm_dpram_addr cpm_muram_addr + +extern void cpm2_reset(void); + +/* Baud rate generators. +*/ +#define CPM_BRG_RST ((uint)0x00020000) +#define CPM_BRG_EN ((uint)0x00010000) +#define CPM_BRG_EXTC_INT ((uint)0x00000000) +#define CPM_BRG_EXTC_CLK3_9 ((uint)0x00004000) +#define CPM_BRG_EXTC_CLK5_15 ((uint)0x00008000) +#define CPM_BRG_ATB ((uint)0x00002000) +#define CPM_BRG_CD_MASK ((uint)0x00001ffe) +#define CPM_BRG_DIV16 ((uint)0x00000001) + +#define CPM2_BRG_INT_CLK (get_brgfreq()) +#define CPM2_BRG_UART_CLK (CPM2_BRG_INT_CLK/16) + +extern void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src); + +/* This function is used by UARTS, or anything else that uses a 16x + * oversampled clock. + */ +static inline void cpm_setbrg(uint brg, uint rate) +{ + __cpm2_setbrg(brg, rate, CPM2_BRG_UART_CLK, 0, CPM_BRG_EXTC_INT); +} + +/* This function is used to set high speed synchronous baud rate + * clocks. + */ +static inline void cpm2_fastbrg(uint brg, uint rate, int div16) +{ + __cpm2_setbrg(brg, rate, CPM2_BRG_INT_CLK, div16, CPM_BRG_EXTC_INT); +} + +/* Function code bits, usually generic to devices. +*/ +#define CPMFCR_GBL ((u_char)0x20) /* Set memory snooping */ +#define CPMFCR_EB ((u_char)0x10) /* Set big endian byte order */ +#define CPMFCR_TC2 ((u_char)0x04) /* Transfer code 2 value */ +#define CPMFCR_DTB ((u_char)0x02) /* Use local bus for data when set */ +#define CPMFCR_BDB ((u_char)0x01) /* Use local bus for BD when set */ + +/* Parameter RAM offsets from the base. +*/ +#define PROFF_SCC1 ((uint)0x8000) +#define PROFF_SCC2 ((uint)0x8100) +#define PROFF_SCC3 ((uint)0x8200) +#define PROFF_SCC4 ((uint)0x8300) +#define PROFF_FCC1 ((uint)0x8400) +#define PROFF_FCC2 ((uint)0x8500) +#define PROFF_FCC3 ((uint)0x8600) +#define PROFF_MCC1 ((uint)0x8700) +#define PROFF_SMC1_BASE ((uint)0x87fc) +#define PROFF_IDMA1_BASE ((uint)0x87fe) +#define PROFF_MCC2 ((uint)0x8800) +#define PROFF_SMC2_BASE ((uint)0x88fc) +#define PROFF_IDMA2_BASE ((uint)0x88fe) +#define PROFF_SPI_BASE ((uint)0x89fc) +#define PROFF_IDMA3_BASE ((uint)0x89fe) +#define PROFF_TIMERS ((uint)0x8ae0) +#define PROFF_REVNUM ((uint)0x8af0) +#define PROFF_RAND ((uint)0x8af8) +#define PROFF_I2C_BASE ((uint)0x8afc) +#define PROFF_IDMA4_BASE ((uint)0x8afe) + +#define PROFF_SCC_SIZE ((uint)0x100) +#define PROFF_FCC_SIZE ((uint)0x100) +#define PROFF_SMC_SIZE ((uint)64) + +/* The SMCs are relocated to any of the first eight DPRAM pages. + * We will fix these at the first locations of DPRAM, until we + * get some microcode patches :-). + * The parameter ram space for the SMCs is fifty-some bytes, and + * they are required to start on a 64 byte boundary. + */ +#define PROFF_SMC1 (0) +#define PROFF_SMC2 (64) + + +/* Define enough so I can at least use the serial port as a UART. + */ +typedef struct smc_uart { + ushort smc_rbase; /* Rx Buffer descriptor base address */ + ushort smc_tbase; /* Tx Buffer descriptor base address */ + u_char smc_rfcr; /* Rx function code */ + u_char smc_tfcr; /* Tx function code */ + ushort smc_mrblr; /* Max receive buffer length */ + uint smc_rstate; /* Internal */ + uint smc_idp; /* Internal */ + ushort smc_rbptr; /* Internal */ + ushort smc_ibc; /* Internal */ + uint smc_rxtmp; /* Internal */ + uint smc_tstate; /* Internal */ + uint smc_tdp; /* Internal */ + ushort smc_tbptr; /* Internal */ + ushort smc_tbc; /* Internal */ + uint smc_txtmp; /* Internal */ + ushort smc_maxidl; /* Maximum idle characters */ + ushort smc_tmpidl; /* Temporary idle counter */ + ushort smc_brklen; /* Last received break length */ + ushort smc_brkec; /* rcv'd break condition counter */ + ushort smc_brkcr; /* xmt break count register */ + ushort smc_rmask; /* Temporary bit mask */ + uint smc_stmp; /* SDMA Temp */ +} smc_uart_t; + +/* SMC uart mode register (Internal memory map). +*/ +#define SMCMR_REN ((ushort)0x0001) +#define SMCMR_TEN ((ushort)0x0002) +#define SMCMR_DM ((ushort)0x000c) +#define SMCMR_SM_GCI ((ushort)0x0000) +#define SMCMR_SM_UART ((ushort)0x0020) +#define SMCMR_SM_TRANS ((ushort)0x0030) +#define SMCMR_SM_MASK ((ushort)0x0030) +#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */ +#define SMCMR_REVD SMCMR_PM_EVEN +#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */ +#define SMCMR_BS SMCMR_PEN +#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */ +#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */ +#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK) + +/* SMC Event and Mask register. +*/ +#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */ +#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */ +#define SMCM_TXE ((unsigned char)0x10) +#define SMCM_BSY ((unsigned char)0x04) +#define SMCM_TX ((unsigned char)0x02) +#define SMCM_RX ((unsigned char)0x01) + +/* SCCs. +*/ +#define SCC_GSMRH_IRP ((uint)0x00040000) +#define SCC_GSMRH_GDE ((uint)0x00010000) +#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000) +#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000) +#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000) +#define SCC_GSMRH_REVD ((uint)0x00002000) +#define SCC_GSMRH_TRX ((uint)0x00001000) +#define SCC_GSMRH_TTX ((uint)0x00000800) +#define SCC_GSMRH_CDP ((uint)0x00000400) +#define SCC_GSMRH_CTSP ((uint)0x00000200) +#define SCC_GSMRH_CDS ((uint)0x00000100) +#define SCC_GSMRH_CTSS ((uint)0x00000080) +#define SCC_GSMRH_TFL ((uint)0x00000040) +#define SCC_GSMRH_RFW ((uint)0x00000020) +#define SCC_GSMRH_TXSY ((uint)0x00000010) +#define SCC_GSMRH_SYNL16 ((uint)0x0000000c) +#define SCC_GSMRH_SYNL8 ((uint)0x00000008) +#define SCC_GSMRH_SYNL4 ((uint)0x00000004) +#define SCC_GSMRH_RTSM ((uint)0x00000002) +#define SCC_GSMRH_RSYN ((uint)0x00000001) + +#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */ +#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000) +#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000) +#define SCC_GSMRL_EDGE_POS ((uint)0x20000000) +#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000) +#define SCC_GSMRL_TCI ((uint)0x10000000) +#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000) +#define SCC_GSMRL_TSNC_4 ((uint)0x08000000) +#define SCC_GSMRL_TSNC_14 ((uint)0x04000000) +#define SCC_GSMRL_TSNC_INF ((uint)0x00000000) +#define SCC_GSMRL_RINV ((uint)0x02000000) +#define SCC_GSMRL_TINV ((uint)0x01000000) +#define SCC_GSMRL_TPL_128 ((uint)0x00c00000) +#define SCC_GSMRL_TPL_64 ((uint)0x00a00000) +#define SCC_GSMRL_TPL_48 ((uint)0x00800000) +#define SCC_GSMRL_TPL_32 ((uint)0x00600000) +#define SCC_GSMRL_TPL_16 ((uint)0x00400000) +#define SCC_GSMRL_TPL_8 ((uint)0x00200000) +#define SCC_GSMRL_TPL_NONE ((uint)0x00000000) +#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000) +#define SCC_GSMRL_TPP_01 ((uint)0x00100000) +#define SCC_GSMRL_TPP_10 ((uint)0x00080000) +#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000) +#define SCC_GSMRL_TEND ((uint)0x00040000) +#define SCC_GSMRL_TDCR_32 ((uint)0x00030000) +#define SCC_GSMRL_TDCR_16 ((uint)0x00020000) +#define SCC_GSMRL_TDCR_8 ((uint)0x00010000) +#define SCC_GSMRL_TDCR_1 ((uint)0x00000000) +#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000) +#define SCC_GSMRL_RDCR_16 ((uint)0x00008000) +#define SCC_GSMRL_RDCR_8 ((uint)0x00004000) +#define SCC_GSMRL_RDCR_1 ((uint)0x00000000) +#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000) +#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000) +#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000) +#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800) +#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000) +#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600) +#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400) +#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200) +#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100) +#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000) +#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */ +#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080) +#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040) +#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000) +#define SCC_GSMRL_ENR ((uint)0x00000020) +#define SCC_GSMRL_ENT ((uint)0x00000010) +#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c) +#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009) +#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008) +#define SCC_GSMRL_MODE_V14 ((uint)0x00000007) +#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006) +#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005) +#define SCC_GSMRL_MODE_UART ((uint)0x00000004) +#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003) +#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002) +#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000) + +#define SCC_TODR_TOD ((ushort)0x8000) + +/* SCC Event and Mask register. +*/ +#define SCCM_TXE ((unsigned char)0x10) +#define SCCM_BSY ((unsigned char)0x04) +#define SCCM_TX ((unsigned char)0x02) +#define SCCM_RX ((unsigned char)0x01) + +typedef struct scc_param { + ushort scc_rbase; /* Rx Buffer descriptor base address */ + ushort scc_tbase; /* Tx Buffer descriptor base address */ + u_char scc_rfcr; /* Rx function code */ + u_char scc_tfcr; /* Tx function code */ + ushort scc_mrblr; /* Max receive buffer length */ + uint scc_rstate; /* Internal */ + uint scc_idp; /* Internal */ + ushort scc_rbptr; /* Internal */ + ushort scc_ibc; /* Internal */ + uint scc_rxtmp; /* Internal */ + uint scc_tstate; /* Internal */ + uint scc_tdp; /* Internal */ + ushort scc_tbptr; /* Internal */ + ushort scc_tbc; /* Internal */ + uint scc_txtmp; /* Internal */ + uint scc_rcrc; /* Internal */ + uint scc_tcrc; /* Internal */ +} sccp_t; + +/* CPM Ethernet through SCC1. + */ +typedef struct scc_enet { + sccp_t sen_genscc; + uint sen_cpres; /* Preset CRC */ + uint sen_cmask; /* Constant mask for CRC */ + uint sen_crcec; /* CRC Error counter */ + uint sen_alec; /* alignment error counter */ + uint sen_disfc; /* discard frame counter */ + ushort sen_pads; /* Tx short frame pad character */ + ushort sen_retlim; /* Retry limit threshold */ + ushort sen_retcnt; /* Retry limit counter */ + ushort sen_maxflr; /* maximum frame length register */ + ushort sen_minflr; /* minimum frame length register */ + ushort sen_maxd1; /* maximum DMA1 length */ + ushort sen_maxd2; /* maximum DMA2 length */ + ushort sen_maxd; /* Rx max DMA */ + ushort sen_dmacnt; /* Rx DMA counter */ + ushort sen_maxb; /* Max BD byte count */ + ushort sen_gaddr1; /* Group address filter */ + ushort sen_gaddr2; + ushort sen_gaddr3; + ushort sen_gaddr4; + uint sen_tbuf0data0; /* Save area 0 - current frame */ + uint sen_tbuf0data1; /* Save area 1 - current frame */ + uint sen_tbuf0rba; /* Internal */ + uint sen_tbuf0crc; /* Internal */ + ushort sen_tbuf0bcnt; /* Internal */ + ushort sen_paddrh; /* physical address (MSB) */ + ushort sen_paddrm; + ushort sen_paddrl; /* physical address (LSB) */ + ushort sen_pper; /* persistence */ + ushort sen_rfbdptr; /* Rx first BD pointer */ + ushort sen_tfbdptr; /* Tx first BD pointer */ + ushort sen_tlbdptr; /* Tx last BD pointer */ + uint sen_tbuf1data0; /* Save area 0 - current frame */ + uint sen_tbuf1data1; /* Save area 1 - current frame */ + uint sen_tbuf1rba; /* Internal */ + uint sen_tbuf1crc; /* Internal */ + ushort sen_tbuf1bcnt; /* Internal */ + ushort sen_txlen; /* Tx Frame length counter */ + ushort sen_iaddr1; /* Individual address filter */ + ushort sen_iaddr2; + ushort sen_iaddr3; + ushort sen_iaddr4; + ushort sen_boffcnt; /* Backoff counter */ + + /* NOTE: Some versions of the manual have the following items + * incorrectly documented. Below is the proper order. + */ + ushort sen_taddrh; /* temp address (MSB) */ + ushort sen_taddrm; + ushort sen_taddrl; /* temp address (LSB) */ +} scc_enet_t; + + +/* SCC Event register as used by Ethernet. +*/ +#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ +#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */ +#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */ +#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */ +#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ +#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */ + +/* SCC Mode Register (PSMR) as used by Ethernet. +*/ +#define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */ +#define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */ +#define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */ +#define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */ +#define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */ +#define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */ +#define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */ +#define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */ +#define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */ +#define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */ +#define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */ +#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */ +#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */ + +/* SCC as UART +*/ +typedef struct scc_uart { + sccp_t scc_genscc; + uint scc_res1; /* Reserved */ + uint scc_res2; /* Reserved */ + ushort scc_maxidl; /* Maximum idle chars */ + ushort scc_idlc; /* temp idle counter */ + ushort scc_brkcr; /* Break count register */ + ushort scc_parec; /* receive parity error counter */ + ushort scc_frmec; /* receive framing error counter */ + ushort scc_nosec; /* receive noise counter */ + ushort scc_brkec; /* receive break condition counter */ + ushort scc_brkln; /* last received break length */ + ushort scc_uaddr1; /* UART address character 1 */ + ushort scc_uaddr2; /* UART address character 2 */ + ushort scc_rtemp; /* Temp storage */ + ushort scc_toseq; /* Transmit out of sequence char */ + ushort scc_char1; /* control character 1 */ + ushort scc_char2; /* control character 2 */ + ushort scc_char3; /* control character 3 */ + ushort scc_char4; /* control character 4 */ + ushort scc_char5; /* control character 5 */ + ushort scc_char6; /* control character 6 */ + ushort scc_char7; /* control character 7 */ + ushort scc_char8; /* control character 8 */ + ushort scc_rccm; /* receive control character mask */ + ushort scc_rccr; /* receive control character register */ + ushort scc_rlbc; /* receive last break character */ +} scc_uart_t; + +/* SCC Event and Mask registers when it is used as a UART. +*/ +#define UART_SCCM_GLR ((ushort)0x1000) +#define UART_SCCM_GLT ((ushort)0x0800) +#define UART_SCCM_AB ((ushort)0x0200) +#define UART_SCCM_IDL ((ushort)0x0100) +#define UART_SCCM_GRA ((ushort)0x0080) +#define UART_SCCM_BRKE ((ushort)0x0040) +#define UART_SCCM_BRKS ((ushort)0x0020) +#define UART_SCCM_CCR ((ushort)0x0008) +#define UART_SCCM_BSY ((ushort)0x0004) +#define UART_SCCM_TX ((ushort)0x0002) +#define UART_SCCM_RX ((ushort)0x0001) + +/* The SCC PSMR when used as a UART. +*/ +#define SCU_PSMR_FLC ((ushort)0x8000) +#define SCU_PSMR_SL ((ushort)0x4000) +#define SCU_PSMR_CL ((ushort)0x3000) +#define SCU_PSMR_UM ((ushort)0x0c00) +#define SCU_PSMR_FRZ ((ushort)0x0200) +#define SCU_PSMR_RZS ((ushort)0x0100) +#define SCU_PSMR_SYN ((ushort)0x0080) +#define SCU_PSMR_DRT ((ushort)0x0040) +#define SCU_PSMR_PEN ((ushort)0x0010) +#define SCU_PSMR_RPM ((ushort)0x000c) +#define SCU_PSMR_REVP ((ushort)0x0008) +#define SCU_PSMR_TPM ((ushort)0x0003) +#define SCU_PSMR_TEVP ((ushort)0x0002) + +/* CPM Transparent mode SCC. + */ +typedef struct scc_trans { + sccp_t st_genscc; + uint st_cpres; /* Preset CRC */ + uint st_cmask; /* Constant mask for CRC */ +} scc_trans_t; + +/* How about some FCCs..... +*/ +#define FCC_GFMR_DIAG_NORM ((uint)0x00000000) +#define FCC_GFMR_DIAG_LE ((uint)0x40000000) +#define FCC_GFMR_DIAG_AE ((uint)0x80000000) +#define FCC_GFMR_DIAG_ALE ((uint)0xc0000000) +#define FCC_GFMR_TCI ((uint)0x20000000) +#define FCC_GFMR_TRX ((uint)0x10000000) +#define FCC_GFMR_TTX ((uint)0x08000000) +#define FCC_GFMR_TTX ((uint)0x08000000) +#define FCC_GFMR_CDP ((uint)0x04000000) +#define FCC_GFMR_CTSP ((uint)0x02000000) +#define FCC_GFMR_CDS ((uint)0x01000000) +#define FCC_GFMR_CTSS ((uint)0x00800000) +#define FCC_GFMR_SYNL_NONE ((uint)0x00000000) +#define FCC_GFMR_SYNL_AUTO ((uint)0x00004000) +#define FCC_GFMR_SYNL_8 ((uint)0x00008000) +#define FCC_GFMR_SYNL_16 ((uint)0x0000c000) +#define FCC_GFMR_RTSM ((uint)0x00002000) +#define FCC_GFMR_RENC_NRZ ((uint)0x00000000) +#define FCC_GFMR_RENC_NRZI ((uint)0x00000800) +#define FCC_GFMR_REVD ((uint)0x00000400) +#define FCC_GFMR_TENC_NRZ ((uint)0x00000000) +#define FCC_GFMR_TENC_NRZI ((uint)0x00000100) +#define FCC_GFMR_TCRC_16 ((uint)0x00000000) +#define FCC_GFMR_TCRC_32 ((uint)0x00000080) +#define FCC_GFMR_ENR ((uint)0x00000020) +#define FCC_GFMR_ENT ((uint)0x00000010) +#define FCC_GFMR_MODE_ENET ((uint)0x0000000c) +#define FCC_GFMR_MODE_ATM ((uint)0x0000000a) +#define FCC_GFMR_MODE_HDLC ((uint)0x00000000) + +/* Generic FCC parameter ram. +*/ +typedef struct fcc_param { + ushort fcc_riptr; /* Rx Internal temp pointer */ + ushort fcc_tiptr; /* Tx Internal temp pointer */ + ushort fcc_res1; + ushort fcc_mrblr; /* Max receive buffer length, mod 32 bytes */ + uint fcc_rstate; /* Upper byte is Func code, must be set */ + uint fcc_rbase; /* Receive BD base */ + ushort fcc_rbdstat; /* RxBD status */ + ushort fcc_rbdlen; /* RxBD down counter */ + uint fcc_rdptr; /* RxBD internal data pointer */ + uint fcc_tstate; /* Upper byte is Func code, must be set */ + uint fcc_tbase; /* Transmit BD base */ + ushort fcc_tbdstat; /* TxBD status */ + ushort fcc_tbdlen; /* TxBD down counter */ + uint fcc_tdptr; /* TxBD internal data pointer */ + uint fcc_rbptr; /* Rx BD Internal buf pointer */ + uint fcc_tbptr; /* Tx BD Internal buf pointer */ + uint fcc_rcrc; /* Rx temp CRC */ + uint fcc_res2; + uint fcc_tcrc; /* Tx temp CRC */ +} fccp_t; + + +/* Ethernet controller through FCC. +*/ +typedef struct fcc_enet { + fccp_t fen_genfcc; + uint fen_statbuf; /* Internal status buffer */ + uint fen_camptr; /* CAM address */ + uint fen_cmask; /* Constant mask for CRC */ + uint fen_cpres; /* Preset CRC */ + uint fen_crcec; /* CRC Error counter */ + uint fen_alec; /* alignment error counter */ + uint fen_disfc; /* discard frame counter */ + ushort fen_retlim; /* Retry limit */ + ushort fen_retcnt; /* Retry counter */ + ushort fen_pper; /* Persistence */ + ushort fen_boffcnt; /* backoff counter */ + uint fen_gaddrh; /* Group address filter, high 32-bits */ + uint fen_gaddrl; /* Group address filter, low 32-bits */ + ushort fen_tfcstat; /* out of sequence TxBD */ + ushort fen_tfclen; + uint fen_tfcptr; + ushort fen_mflr; /* Maximum frame length (1518) */ + ushort fen_paddrh; /* MAC address */ + ushort fen_paddrm; + ushort fen_paddrl; + ushort fen_ibdcount; /* Internal BD counter */ + ushort fen_ibdstart; /* Internal BD start pointer */ + ushort fen_ibdend; /* Internal BD end pointer */ + ushort fen_txlen; /* Internal Tx frame length counter */ + uint fen_ibdbase[8]; /* Internal use */ + uint fen_iaddrh; /* Individual address filter */ + uint fen_iaddrl; + ushort fen_minflr; /* Minimum frame length (64) */ + ushort fen_taddrh; /* Filter transfer MAC address */ + ushort fen_taddrm; + ushort fen_taddrl; + ushort fen_padptr; /* Pointer to pad byte buffer */ + ushort fen_cftype; /* control frame type */ + ushort fen_cfrange; /* control frame range */ + ushort fen_maxb; /* maximum BD count */ + ushort fen_maxd1; /* Max DMA1 length (1520) */ + ushort fen_maxd2; /* Max DMA2 length (1520) */ + ushort fen_maxd; /* internal max DMA count */ + ushort fen_dmacnt; /* internal DMA counter */ + uint fen_octc; /* Total octect counter */ + uint fen_colc; /* Total collision counter */ + uint fen_broc; /* Total broadcast packet counter */ + uint fen_mulc; /* Total multicast packet count */ + uint fen_uspc; /* Total packets < 64 bytes */ + uint fen_frgc; /* Total packets < 64 bytes with errors */ + uint fen_ospc; /* Total packets > 1518 */ + uint fen_jbrc; /* Total packets > 1518 with errors */ + uint fen_p64c; /* Total packets == 64 bytes */ + uint fen_p65c; /* Total packets 64 < bytes <= 127 */ + uint fen_p128c; /* Total packets 127 < bytes <= 255 */ + uint fen_p256c; /* Total packets 256 < bytes <= 511 */ + uint fen_p512c; /* Total packets 512 < bytes <= 1023 */ + uint fen_p1024c; /* Total packets 1024 < bytes <= 1518 */ + uint fen_cambuf; /* Internal CAM buffer poiner */ + ushort fen_rfthr; /* Received frames threshold */ + ushort fen_rfcnt; /* Received frames count */ +} fcc_enet_t; + +/* FCC Event/Mask register as used by Ethernet. +*/ +#define FCC_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ +#define FCC_ENET_RXC ((ushort)0x0040) /* Control Frame Received */ +#define FCC_ENET_TXC ((ushort)0x0020) /* Out of seq. Tx sent */ +#define FCC_ENET_TXE ((ushort)0x0010) /* Transmit Error */ +#define FCC_ENET_RXF ((ushort)0x0008) /* Full frame received */ +#define FCC_ENET_BSY ((ushort)0x0004) /* Busy. Rx Frame dropped */ +#define FCC_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ +#define FCC_ENET_RXB ((ushort)0x0001) /* A buffer was received */ + +/* FCC Mode Register (FPSMR) as used by Ethernet. +*/ +#define FCC_PSMR_HBC ((uint)0x80000000) /* Enable heartbeat */ +#define FCC_PSMR_FC ((uint)0x40000000) /* Force Collision */ +#define FCC_PSMR_SBT ((uint)0x20000000) /* Stop backoff timer */ +#define FCC_PSMR_LPB ((uint)0x10000000) /* Local protect. 1 = FDX */ +#define FCC_PSMR_LCW ((uint)0x08000000) /* Late collision select */ +#define FCC_PSMR_FDE ((uint)0x04000000) /* Full Duplex Enable */ +#define FCC_PSMR_MON ((uint)0x02000000) /* RMON Enable */ +#define FCC_PSMR_PRO ((uint)0x00400000) /* Promiscuous Enable */ +#define FCC_PSMR_FCE ((uint)0x00200000) /* Flow Control Enable */ +#define FCC_PSMR_RSH ((uint)0x00100000) /* Receive Short Frames */ +#define FCC_PSMR_CAM ((uint)0x00000400) /* CAM enable */ +#define FCC_PSMR_BRO ((uint)0x00000200) /* Broadcast pkt discard */ +#define FCC_PSMR_ENCRC ((uint)0x00000080) /* Use 32-bit CRC */ + +/* IIC parameter RAM. +*/ +typedef struct iic { + ushort iic_rbase; /* Rx Buffer descriptor base address */ + ushort iic_tbase; /* Tx Buffer descriptor base address */ + u_char iic_rfcr; /* Rx function code */ + u_char iic_tfcr; /* Tx function code */ + ushort iic_mrblr; /* Max receive buffer length */ + uint iic_rstate; /* Internal */ + uint iic_rdp; /* Internal */ + ushort iic_rbptr; /* Internal */ + ushort iic_rbc; /* Internal */ + uint iic_rxtmp; /* Internal */ + uint iic_tstate; /* Internal */ + uint iic_tdp; /* Internal */ + ushort iic_tbptr; /* Internal */ + ushort iic_tbc; /* Internal */ + uint iic_txtmp; /* Internal */ +} iic_t; + +/* SPI parameter RAM. +*/ +typedef struct spi { + ushort spi_rbase; /* Rx Buffer descriptor base address */ + ushort spi_tbase; /* Tx Buffer descriptor base address */ + u_char spi_rfcr; /* Rx function code */ + u_char spi_tfcr; /* Tx function code */ + ushort spi_mrblr; /* Max receive buffer length */ + uint spi_rstate; /* Internal */ + uint spi_rdp; /* Internal */ + ushort spi_rbptr; /* Internal */ + ushort spi_rbc; /* Internal */ + uint spi_rxtmp; /* Internal */ + uint spi_tstate; /* Internal */ + uint spi_tdp; /* Internal */ + ushort spi_tbptr; /* Internal */ + ushort spi_tbc; /* Internal */ + uint spi_txtmp; /* Internal */ + uint spi_res; /* Tx temp. */ + uint spi_res1[4]; /* SDMA temp. */ +} spi_t; + +/* SPI Mode register. +*/ +#define SPMODE_LOOP ((ushort)0x4000) /* Loopback */ +#define SPMODE_CI ((ushort)0x2000) /* Clock Invert */ +#define SPMODE_CP ((ushort)0x1000) /* Clock Phase */ +#define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */ +#define SPMODE_REV ((ushort)0x0400) /* Reversed Data */ +#define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */ +#define SPMODE_EN ((ushort)0x0100) /* Enable */ +#define SPMODE_LENMSK ((ushort)0x00f0) /* character length */ +#define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */ + +#define SPMODE_LEN(x) ((((x)-1)&0xF)<<4) +#define SPMODE_PM(x) ((x) &0xF) + +#define SPI_EB ((u_char)0x10) /* big endian byte order */ + +/* IDMA parameter RAM +*/ +typedef struct idma { + ushort ibase; /* IDMA buffer descriptor table base address */ + ushort dcm; /* DMA channel mode */ + ushort ibdptr; /* IDMA current buffer descriptor pointer */ + ushort dpr_buf; /* IDMA transfer buffer base address */ + ushort buf_inv; /* internal buffer inventory */ + ushort ss_max; /* steady-state maximum transfer size */ + ushort dpr_in_ptr; /* write pointer inside the internal buffer */ + ushort sts; /* source transfer size */ + ushort dpr_out_ptr; /* read pointer inside the internal buffer */ + ushort seob; /* source end of burst */ + ushort deob; /* destination end of burst */ + ushort dts; /* destination transfer size */ + ushort ret_add; /* return address when working in ERM=1 mode */ + ushort res0; /* reserved */ + uint bd_cnt; /* internal byte count */ + uint s_ptr; /* source internal data pointer */ + uint d_ptr; /* destination internal data pointer */ + uint istate; /* internal state */ + u_char res1[20]; /* pad to 64-byte length */ +} idma_t; + +/* DMA channel mode bit fields +*/ +#define IDMA_DCM_FB ((ushort)0x8000) /* fly-by mode */ +#define IDMA_DCM_LP ((ushort)0x4000) /* low priority */ +#define IDMA_DCM_TC2 ((ushort)0x0400) /* value driven on TC[2] */ +#define IDMA_DCM_DMA_WRAP_MASK ((ushort)0x01c0) /* mask for DMA wrap */ +#define IDMA_DCM_DMA_WRAP_64 ((ushort)0x0000) /* 64-byte DMA xfer buffer */ +#define IDMA_DCM_DMA_WRAP_128 ((ushort)0x0040) /* 128-byte DMA xfer buffer */ +#define IDMA_DCM_DMA_WRAP_256 ((ushort)0x0080) /* 256-byte DMA xfer buffer */ +#define IDMA_DCM_DMA_WRAP_512 ((ushort)0x00c0) /* 512-byte DMA xfer buffer */ +#define IDMA_DCM_DMA_WRAP_1024 ((ushort)0x0100) /* 1024-byte DMA xfer buffer */ +#define IDMA_DCM_DMA_WRAP_2048 ((ushort)0x0140) /* 2048-byte DMA xfer buffer */ +#define IDMA_DCM_SINC ((ushort)0x0020) /* source inc addr */ +#define IDMA_DCM_DINC ((ushort)0x0010) /* destination inc addr */ +#define IDMA_DCM_ERM ((ushort)0x0008) /* external request mode */ +#define IDMA_DCM_DT ((ushort)0x0004) /* DONE treatment */ +#define IDMA_DCM_SD_MASK ((ushort)0x0003) /* mask for SD bit field */ +#define IDMA_DCM_SD_MEM2MEM ((ushort)0x0000) /* memory-to-memory xfer */ +#define IDMA_DCM_SD_PER2MEM ((ushort)0x0002) /* peripheral-to-memory xfer */ +#define IDMA_DCM_SD_MEM2PER ((ushort)0x0001) /* memory-to-peripheral xfer */ + +/* IDMA Buffer Descriptors +*/ +typedef struct idma_bd { + uint flags; + uint len; /* data length */ + uint src; /* source data buffer pointer */ + uint dst; /* destination data buffer pointer */ +} idma_bd_t; + +/* IDMA buffer descriptor flag bit fields +*/ +#define IDMA_BD_V ((uint)0x80000000) /* valid */ +#define IDMA_BD_W ((uint)0x20000000) /* wrap */ +#define IDMA_BD_I ((uint)0x10000000) /* interrupt */ +#define IDMA_BD_L ((uint)0x08000000) /* last */ +#define IDMA_BD_CM ((uint)0x02000000) /* continuous mode */ +#define IDMA_BD_SDN ((uint)0x00400000) /* source done */ +#define IDMA_BD_DDN ((uint)0x00200000) /* destination done */ +#define IDMA_BD_DGBL ((uint)0x00100000) /* destination global */ +#define IDMA_BD_DBO_LE ((uint)0x00040000) /* little-end dest byte order */ +#define IDMA_BD_DBO_BE ((uint)0x00080000) /* big-end dest byte order */ +#define IDMA_BD_DDTB ((uint)0x00010000) /* destination data bus */ +#define IDMA_BD_SGBL ((uint)0x00002000) /* source global */ +#define IDMA_BD_SBO_LE ((uint)0x00000800) /* little-end src byte order */ +#define IDMA_BD_SBO_BE ((uint)0x00001000) /* big-end src byte order */ +#define IDMA_BD_SDTB ((uint)0x00000200) /* source data bus */ + +/* per-channel IDMA registers +*/ +typedef struct im_idma { + u_char idsr; /* IDMAn event status register */ + u_char res0[3]; + u_char idmr; /* IDMAn event mask register */ + u_char res1[3]; +} im_idma_t; + +/* IDMA event register bit fields +*/ +#define IDMA_EVENT_SC ((unsigned char)0x08) /* stop completed */ +#define IDMA_EVENT_OB ((unsigned char)0x04) /* out of buffers */ +#define IDMA_EVENT_EDN ((unsigned char)0x02) /* external DONE asserted */ +#define IDMA_EVENT_BC ((unsigned char)0x01) /* buffer descriptor complete */ + +/* RISC Controller Configuration Register (RCCR) bit fields +*/ +#define RCCR_TIME ((uint)0x80000000) /* timer enable */ +#define RCCR_TIMEP_MASK ((uint)0x3f000000) /* mask for timer period bit field */ +#define RCCR_DR0M ((uint)0x00800000) /* IDMA0 request mode */ +#define RCCR_DR1M ((uint)0x00400000) /* IDMA1 request mode */ +#define RCCR_DR2M ((uint)0x00000080) /* IDMA2 request mode */ +#define RCCR_DR3M ((uint)0x00000040) /* IDMA3 request mode */ +#define RCCR_DR0QP_MASK ((uint)0x00300000) /* mask for IDMA0 req priority */ +#define RCCR_DR0QP_HIGH ((uint)0x00000000) /* IDMA0 has high req priority */ +#define RCCR_DR0QP_MED ((uint)0x00100000) /* IDMA0 has medium req priority */ +#define RCCR_DR0QP_LOW ((uint)0x00200000) /* IDMA0 has low req priority */ +#define RCCR_DR1QP_MASK ((uint)0x00030000) /* mask for IDMA1 req priority */ +#define RCCR_DR1QP_HIGH ((uint)0x00000000) /* IDMA1 has high req priority */ +#define RCCR_DR1QP_MED ((uint)0x00010000) /* IDMA1 has medium req priority */ +#define RCCR_DR1QP_LOW ((uint)0x00020000) /* IDMA1 has low req priority */ +#define RCCR_DR2QP_MASK ((uint)0x00000030) /* mask for IDMA2 req priority */ +#define RCCR_DR2QP_HIGH ((uint)0x00000000) /* IDMA2 has high req priority */ +#define RCCR_DR2QP_MED ((uint)0x00000010) /* IDMA2 has medium req priority */ +#define RCCR_DR2QP_LOW ((uint)0x00000020) /* IDMA2 has low req priority */ +#define RCCR_DR3QP_MASK ((uint)0x00000003) /* mask for IDMA3 req priority */ +#define RCCR_DR3QP_HIGH ((uint)0x00000000) /* IDMA3 has high req priority */ +#define RCCR_DR3QP_MED ((uint)0x00000001) /* IDMA3 has medium req priority */ +#define RCCR_DR3QP_LOW ((uint)0x00000002) /* IDMA3 has low req priority */ +#define RCCR_EIE ((uint)0x00080000) /* external interrupt enable */ +#define RCCR_SCD ((uint)0x00040000) /* scheduler configuration */ +#define RCCR_ERAM_MASK ((uint)0x0000e000) /* mask for enable RAM microcode */ +#define RCCR_ERAM_0KB ((uint)0x00000000) /* use 0KB of dpram for microcode */ +#define RCCR_ERAM_2KB ((uint)0x00002000) /* use 2KB of dpram for microcode */ +#define RCCR_ERAM_4KB ((uint)0x00004000) /* use 4KB of dpram for microcode */ +#define RCCR_ERAM_6KB ((uint)0x00006000) /* use 6KB of dpram for microcode */ +#define RCCR_ERAM_8KB ((uint)0x00008000) /* use 8KB of dpram for microcode */ +#define RCCR_ERAM_10KB ((uint)0x0000a000) /* use 10KB of dpram for microcode */ +#define RCCR_ERAM_12KB ((uint)0x0000c000) /* use 12KB of dpram for microcode */ +#define RCCR_EDM0 ((uint)0x00000800) /* DREQ0 edge detect mode */ +#define RCCR_EDM1 ((uint)0x00000400) /* DREQ1 edge detect mode */ +#define RCCR_EDM2 ((uint)0x00000200) /* DREQ2 edge detect mode */ +#define RCCR_EDM3 ((uint)0x00000100) /* DREQ3 edge detect mode */ +#define RCCR_DEM01 ((uint)0x00000008) /* DONE0/DONE1 edge detect mode */ +#define RCCR_DEM23 ((uint)0x00000004) /* DONE2/DONE3 edge detect mode */ + +/*----------------------------------------------------------------------- + * CMXFCR - CMX FCC Clock Route Register + */ +#define CMXFCR_FC1 0x40000000 /* FCC1 connection */ +#define CMXFCR_RF1CS_MSK 0x38000000 /* Receive FCC1 Clock Source Mask */ +#define CMXFCR_TF1CS_MSK 0x07000000 /* Transmit FCC1 Clock Source Mask */ +#define CMXFCR_FC2 0x00400000 /* FCC2 connection */ +#define CMXFCR_RF2CS_MSK 0x00380000 /* Receive FCC2 Clock Source Mask */ +#define CMXFCR_TF2CS_MSK 0x00070000 /* Transmit FCC2 Clock Source Mask */ +#define CMXFCR_FC3 0x00004000 /* FCC3 connection */ +#define CMXFCR_RF3CS_MSK 0x00003800 /* Receive FCC3 Clock Source Mask */ +#define CMXFCR_TF3CS_MSK 0x00000700 /* Transmit FCC3 Clock Source Mask */ + +#define CMXFCR_RF1CS_BRG5 0x00000000 /* Receive FCC1 Clock Source is BRG5 */ +#define CMXFCR_RF1CS_BRG6 0x08000000 /* Receive FCC1 Clock Source is BRG6 */ +#define CMXFCR_RF1CS_BRG7 0x10000000 /* Receive FCC1 Clock Source is BRG7 */ +#define CMXFCR_RF1CS_BRG8 0x18000000 /* Receive FCC1 Clock Source is BRG8 */ +#define CMXFCR_RF1CS_CLK9 0x20000000 /* Receive FCC1 Clock Source is CLK9 */ +#define CMXFCR_RF1CS_CLK10 0x28000000 /* Receive FCC1 Clock Source is CLK10 */ +#define CMXFCR_RF1CS_CLK11 0x30000000 /* Receive FCC1 Clock Source is CLK11 */ +#define CMXFCR_RF1CS_CLK12 0x38000000 /* Receive FCC1 Clock Source is CLK12 */ + +#define CMXFCR_TF1CS_BRG5 0x00000000 /* Transmit FCC1 Clock Source is BRG5 */ +#define CMXFCR_TF1CS_BRG6 0x01000000 /* Transmit FCC1 Clock Source is BRG6 */ +#define CMXFCR_TF1CS_BRG7 0x02000000 /* Transmit FCC1 Clock Source is BRG7 */ +#define CMXFCR_TF1CS_BRG8 0x03000000 /* Transmit FCC1 Clock Source is BRG8 */ +#define CMXFCR_TF1CS_CLK9 0x04000000 /* Transmit FCC1 Clock Source is CLK9 */ +#define CMXFCR_TF1CS_CLK10 0x05000000 /* Transmit FCC1 Clock Source is CLK10 */ +#define CMXFCR_TF1CS_CLK11 0x06000000 /* Transmit FCC1 Clock Source is CLK11 */ +#define CMXFCR_TF1CS_CLK12 0x07000000 /* Transmit FCC1 Clock Source is CLK12 */ + +#define CMXFCR_RF2CS_BRG5 0x00000000 /* Receive FCC2 Clock Source is BRG5 */ +#define CMXFCR_RF2CS_BRG6 0x00080000 /* Receive FCC2 Clock Source is BRG6 */ +#define CMXFCR_RF2CS_BRG7 0x00100000 /* Receive FCC2 Clock Source is BRG7 */ +#define CMXFCR_RF2CS_BRG8 0x00180000 /* Receive FCC2 Clock Source is BRG8 */ +#define CMXFCR_RF2CS_CLK13 0x00200000 /* Receive FCC2 Clock Source is CLK13 */ +#define CMXFCR_RF2CS_CLK14 0x00280000 /* Receive FCC2 Clock Source is CLK14 */ +#define CMXFCR_RF2CS_CLK15 0x00300000 /* Receive FCC2 Clock Source is CLK15 */ +#define CMXFCR_RF2CS_CLK16 0x00380000 /* Receive FCC2 Clock Source is CLK16 */ + +#define CMXFCR_TF2CS_BRG5 0x00000000 /* Transmit FCC2 Clock Source is BRG5 */ +#define CMXFCR_TF2CS_BRG6 0x00010000 /* Transmit FCC2 Clock Source is BRG6 */ +#define CMXFCR_TF2CS_BRG7 0x00020000 /* Transmit FCC2 Clock Source is BRG7 */ +#define CMXFCR_TF2CS_BRG8 0x00030000 /* Transmit FCC2 Clock Source is BRG8 */ +#define CMXFCR_TF2CS_CLK13 0x00040000 /* Transmit FCC2 Clock Source is CLK13 */ +#define CMXFCR_TF2CS_CLK14 0x00050000 /* Transmit FCC2 Clock Source is CLK14 */ +#define CMXFCR_TF2CS_CLK15 0x00060000 /* Transmit FCC2 Clock Source is CLK15 */ +#define CMXFCR_TF2CS_CLK16 0x00070000 /* Transmit FCC2 Clock Source is CLK16 */ + +#define CMXFCR_RF3CS_BRG5 0x00000000 /* Receive FCC3 Clock Source is BRG5 */ +#define CMXFCR_RF3CS_BRG6 0x00000800 /* Receive FCC3 Clock Source is BRG6 */ +#define CMXFCR_RF3CS_BRG7 0x00001000 /* Receive FCC3 Clock Source is BRG7 */ +#define CMXFCR_RF3CS_BRG8 0x00001800 /* Receive FCC3 Clock Source is BRG8 */ +#define CMXFCR_RF3CS_CLK13 0x00002000 /* Receive FCC3 Clock Source is CLK13 */ +#define CMXFCR_RF3CS_CLK14 0x00002800 /* Receive FCC3 Clock Source is CLK14 */ +#define CMXFCR_RF3CS_CLK15 0x00003000 /* Receive FCC3 Clock Source is CLK15 */ +#define CMXFCR_RF3CS_CLK16 0x00003800 /* Receive FCC3 Clock Source is CLK16 */ + +#define CMXFCR_TF3CS_BRG5 0x00000000 /* Transmit FCC3 Clock Source is BRG5 */ +#define CMXFCR_TF3CS_BRG6 0x00000100 /* Transmit FCC3 Clock Source is BRG6 */ +#define CMXFCR_TF3CS_BRG7 0x00000200 /* Transmit FCC3 Clock Source is BRG7 */ +#define CMXFCR_TF3CS_BRG8 0x00000300 /* Transmit FCC3 Clock Source is BRG8 */ +#define CMXFCR_TF3CS_CLK13 0x00000400 /* Transmit FCC3 Clock Source is CLK13 */ +#define CMXFCR_TF3CS_CLK14 0x00000500 /* Transmit FCC3 Clock Source is CLK14 */ +#define CMXFCR_TF3CS_CLK15 0x00000600 /* Transmit FCC3 Clock Source is CLK15 */ +#define CMXFCR_TF3CS_CLK16 0x00000700 /* Transmit FCC3 Clock Source is CLK16 */ + +/*----------------------------------------------------------------------- + * CMXSCR - CMX SCC Clock Route Register + */ +#define CMXSCR_GR1 0x80000000 /* Grant Support of SCC1 */ +#define CMXSCR_SC1 0x40000000 /* SCC1 connection */ +#define CMXSCR_RS1CS_MSK 0x38000000 /* Receive SCC1 Clock Source Mask */ +#define CMXSCR_TS1CS_MSK 0x07000000 /* Transmit SCC1 Clock Source Mask */ +#define CMXSCR_GR2 0x00800000 /* Grant Support of SCC2 */ +#define CMXSCR_SC2 0x00400000 /* SCC2 connection */ +#define CMXSCR_RS2CS_MSK 0x00380000 /* Receive SCC2 Clock Source Mask */ +#define CMXSCR_TS2CS_MSK 0x00070000 /* Transmit SCC2 Clock Source Mask */ +#define CMXSCR_GR3 0x00008000 /* Grant Support of SCC3 */ +#define CMXSCR_SC3 0x00004000 /* SCC3 connection */ +#define CMXSCR_RS3CS_MSK 0x00003800 /* Receive SCC3 Clock Source Mask */ +#define CMXSCR_TS3CS_MSK 0x00000700 /* Transmit SCC3 Clock Source Mask */ +#define CMXSCR_GR4 0x00000080 /* Grant Support of SCC4 */ +#define CMXSCR_SC4 0x00000040 /* SCC4 connection */ +#define CMXSCR_RS4CS_MSK 0x00000038 /* Receive SCC4 Clock Source Mask */ +#define CMXSCR_TS4CS_MSK 0x00000007 /* Transmit SCC4 Clock Source Mask */ + +#define CMXSCR_RS1CS_BRG1 0x00000000 /* SCC1 Rx Clock Source is BRG1 */ +#define CMXSCR_RS1CS_BRG2 0x08000000 /* SCC1 Rx Clock Source is BRG2 */ +#define CMXSCR_RS1CS_BRG3 0x10000000 /* SCC1 Rx Clock Source is BRG3 */ +#define CMXSCR_RS1CS_BRG4 0x18000000 /* SCC1 Rx Clock Source is BRG4 */ +#define CMXSCR_RS1CS_CLK11 0x20000000 /* SCC1 Rx Clock Source is CLK11 */ +#define CMXSCR_RS1CS_CLK12 0x28000000 /* SCC1 Rx Clock Source is CLK12 */ +#define CMXSCR_RS1CS_CLK3 0x30000000 /* SCC1 Rx Clock Source is CLK3 */ +#define CMXSCR_RS1CS_CLK4 0x38000000 /* SCC1 Rx Clock Source is CLK4 */ + +#define CMXSCR_TS1CS_BRG1 0x00000000 /* SCC1 Tx Clock Source is BRG1 */ +#define CMXSCR_TS1CS_BRG2 0x01000000 /* SCC1 Tx Clock Source is BRG2 */ +#define CMXSCR_TS1CS_BRG3 0x02000000 /* SCC1 Tx Clock Source is BRG3 */ +#define CMXSCR_TS1CS_BRG4 0x03000000 /* SCC1 Tx Clock Source is BRG4 */ +#define CMXSCR_TS1CS_CLK11 0x04000000 /* SCC1 Tx Clock Source is CLK11 */ +#define CMXSCR_TS1CS_CLK12 0x05000000 /* SCC1 Tx Clock Source is CLK12 */ +#define CMXSCR_TS1CS_CLK3 0x06000000 /* SCC1 Tx Clock Source is CLK3 */ +#define CMXSCR_TS1CS_CLK4 0x07000000 /* SCC1 Tx Clock Source is CLK4 */ + +#define CMXSCR_RS2CS_BRG1 0x00000000 /* SCC2 Rx Clock Source is BRG1 */ +#define CMXSCR_RS2CS_BRG2 0x00080000 /* SCC2 Rx Clock Source is BRG2 */ +#define CMXSCR_RS2CS_BRG3 0x00100000 /* SCC2 Rx Clock Source is BRG3 */ +#define CMXSCR_RS2CS_BRG4 0x00180000 /* SCC2 Rx Clock Source is BRG4 */ +#define CMXSCR_RS2CS_CLK11 0x00200000 /* SCC2 Rx Clock Source is CLK11 */ +#define CMXSCR_RS2CS_CLK12 0x00280000 /* SCC2 Rx Clock Source is CLK12 */ +#define CMXSCR_RS2CS_CLK3 0x00300000 /* SCC2 Rx Clock Source is CLK3 */ +#define CMXSCR_RS2CS_CLK4 0x00380000 /* SCC2 Rx Clock Source is CLK4 */ + +#define CMXSCR_TS2CS_BRG1 0x00000000 /* SCC2 Tx Clock Source is BRG1 */ +#define CMXSCR_TS2CS_BRG2 0x00010000 /* SCC2 Tx Clock Source is BRG2 */ +#define CMXSCR_TS2CS_BRG3 0x00020000 /* SCC2 Tx Clock Source is BRG3 */ +#define CMXSCR_TS2CS_BRG4 0x00030000 /* SCC2 Tx Clock Source is BRG4 */ +#define CMXSCR_TS2CS_CLK11 0x00040000 /* SCC2 Tx Clock Source is CLK11 */ +#define CMXSCR_TS2CS_CLK12 0x00050000 /* SCC2 Tx Clock Source is CLK12 */ +#define CMXSCR_TS2CS_CLK3 0x00060000 /* SCC2 Tx Clock Source is CLK3 */ +#define CMXSCR_TS2CS_CLK4 0x00070000 /* SCC2 Tx Clock Source is CLK4 */ + +#define CMXSCR_RS3CS_BRG1 0x00000000 /* SCC3 Rx Clock Source is BRG1 */ +#define CMXSCR_RS3CS_BRG2 0x00000800 /* SCC3 Rx Clock Source is BRG2 */ +#define CMXSCR_RS3CS_BRG3 0x00001000 /* SCC3 Rx Clock Source is BRG3 */ +#define CMXSCR_RS3CS_BRG4 0x00001800 /* SCC3 Rx Clock Source is BRG4 */ +#define CMXSCR_RS3CS_CLK5 0x00002000 /* SCC3 Rx Clock Source is CLK5 */ +#define CMXSCR_RS3CS_CLK6 0x00002800 /* SCC3 Rx Clock Source is CLK6 */ +#define CMXSCR_RS3CS_CLK7 0x00003000 /* SCC3 Rx Clock Source is CLK7 */ +#define CMXSCR_RS3CS_CLK8 0x00003800 /* SCC3 Rx Clock Source is CLK8 */ + +#define CMXSCR_TS3CS_BRG1 0x00000000 /* SCC3 Tx Clock Source is BRG1 */ +#define CMXSCR_TS3CS_BRG2 0x00000100 /* SCC3 Tx Clock Source is BRG2 */ +#define CMXSCR_TS3CS_BRG3 0x00000200 /* SCC3 Tx Clock Source is BRG3 */ +#define CMXSCR_TS3CS_BRG4 0x00000300 /* SCC3 Tx Clock Source is BRG4 */ +#define CMXSCR_TS3CS_CLK5 0x00000400 /* SCC3 Tx Clock Source is CLK5 */ +#define CMXSCR_TS3CS_CLK6 0x00000500 /* SCC3 Tx Clock Source is CLK6 */ +#define CMXSCR_TS3CS_CLK7 0x00000600 /* SCC3 Tx Clock Source is CLK7 */ +#define CMXSCR_TS3CS_CLK8 0x00000700 /* SCC3 Tx Clock Source is CLK8 */ + +#define CMXSCR_RS4CS_BRG1 0x00000000 /* SCC4 Rx Clock Source is BRG1 */ +#define CMXSCR_RS4CS_BRG2 0x00000008 /* SCC4 Rx Clock Source is BRG2 */ +#define CMXSCR_RS4CS_BRG3 0x00000010 /* SCC4 Rx Clock Source is BRG3 */ +#define CMXSCR_RS4CS_BRG4 0x00000018 /* SCC4 Rx Clock Source is BRG4 */ +#define CMXSCR_RS4CS_CLK5 0x00000020 /* SCC4 Rx Clock Source is CLK5 */ +#define CMXSCR_RS4CS_CLK6 0x00000028 /* SCC4 Rx Clock Source is CLK6 */ +#define CMXSCR_RS4CS_CLK7 0x00000030 /* SCC4 Rx Clock Source is CLK7 */ +#define CMXSCR_RS4CS_CLK8 0x00000038 /* SCC4 Rx Clock Source is CLK8 */ + +#define CMXSCR_TS4CS_BRG1 0x00000000 /* SCC4 Tx Clock Source is BRG1 */ +#define CMXSCR_TS4CS_BRG2 0x00000001 /* SCC4 Tx Clock Source is BRG2 */ +#define CMXSCR_TS4CS_BRG3 0x00000002 /* SCC4 Tx Clock Source is BRG3 */ +#define CMXSCR_TS4CS_BRG4 0x00000003 /* SCC4 Tx Clock Source is BRG4 */ +#define CMXSCR_TS4CS_CLK5 0x00000004 /* SCC4 Tx Clock Source is CLK5 */ +#define CMXSCR_TS4CS_CLK6 0x00000005 /* SCC4 Tx Clock Source is CLK6 */ +#define CMXSCR_TS4CS_CLK7 0x00000006 /* SCC4 Tx Clock Source is CLK7 */ +#define CMXSCR_TS4CS_CLK8 0x00000007 /* SCC4 Tx Clock Source is CLK8 */ + +/*----------------------------------------------------------------------- + * SIUMCR - SIU Module Configuration Register 4-31 + */ +#define SIUMCR_BBD 0x80000000 /* Bus Busy Disable */ +#define SIUMCR_ESE 0x40000000 /* External Snoop Enable */ +#define SIUMCR_PBSE 0x20000000 /* Parity Byte Select Enable */ +#define SIUMCR_CDIS 0x10000000 /* Core Disable */ +#define SIUMCR_DPPC00 0x00000000 /* Data Parity Pins Configuration*/ +#define SIUMCR_DPPC01 0x04000000 /* - " - */ +#define SIUMCR_DPPC10 0x08000000 /* - " - */ +#define SIUMCR_DPPC11 0x0c000000 /* - " - */ +#define SIUMCR_L2CPC00 0x00000000 /* L2 Cache Pins Configuration */ +#define SIUMCR_L2CPC01 0x01000000 /* - " - */ +#define SIUMCR_L2CPC10 0x02000000 /* - " - */ +#define SIUMCR_L2CPC11 0x03000000 /* - " - */ +#define SIUMCR_LBPC00 0x00000000 /* Local Bus Pins Configuration */ +#define SIUMCR_LBPC01 0x00400000 /* - " - */ +#define SIUMCR_LBPC10 0x00800000 /* - " - */ +#define SIUMCR_LBPC11 0x00c00000 /* - " - */ +#define SIUMCR_APPC00 0x00000000 /* Address Parity Pins Configuration*/ +#define SIUMCR_APPC01 0x00100000 /* - " - */ +#define SIUMCR_APPC10 0x00200000 /* - " - */ +#define SIUMCR_APPC11 0x00300000 /* - " - */ +#define SIUMCR_CS10PC00 0x00000000 /* CS10 Pin Configuration */ +#define SIUMCR_CS10PC01 0x00040000 /* - " - */ +#define SIUMCR_CS10PC10 0x00080000 /* - " - */ +#define SIUMCR_CS10PC11 0x000c0000 /* - " - */ +#define SIUMCR_BCTLC00 0x00000000 /* Buffer Control Configuration */ +#define SIUMCR_BCTLC01 0x00010000 /* - " - */ +#define SIUMCR_BCTLC10 0x00020000 /* - " - */ +#define SIUMCR_BCTLC11 0x00030000 /* - " - */ +#define SIUMCR_MMR00 0x00000000 /* Mask Masters Requests */ +#define SIUMCR_MMR01 0x00004000 /* - " - */ +#define SIUMCR_MMR10 0x00008000 /* - " - */ +#define SIUMCR_MMR11 0x0000c000 /* - " - */ +#define SIUMCR_LPBSE 0x00002000 /* LocalBus Parity Byte Select Enable*/ + +/*----------------------------------------------------------------------- + * SCCR - System Clock Control Register 9-8 +*/ +#define SCCR_PCI_MODE 0x00000100 /* PCI Mode */ +#define SCCR_PCI_MODCK 0x00000080 /* Value of PCI_MODCK pin */ +#define SCCR_PCIDF_MSK 0x00000078 /* PCI division factor */ +#define SCCR_PCIDF_SHIFT 3 + +#ifndef CPM_IMMR_OFFSET +#define CPM_IMMR_OFFSET 0x101a8 +#endif + +#define FCC_PSMR_RMII ((uint)0x00020000) /* Use RMII interface */ + +/* FCC iop & clock configuration. BSP code is responsible to define Fx_RXCLK & Fx_TXCLK + * in order to use clock-computing stuff below for the FCC x + */ + +/* Automatically generates register configurations */ +#define PC_CLK(x) ((uint)(1<<(x-1))) /* FCC CLK I/O ports */ + +#define CMXFCR_RF1CS(x) ((uint)((x-5)<<27)) /* FCC1 Receive Clock Source */ +#define CMXFCR_TF1CS(x) ((uint)((x-5)<<24)) /* FCC1 Transmit Clock Source */ +#define CMXFCR_RF2CS(x) ((uint)((x-9)<<19)) /* FCC2 Receive Clock Source */ +#define CMXFCR_TF2CS(x) ((uint)((x-9)<<16)) /* FCC2 Transmit Clock Source */ +#define CMXFCR_RF3CS(x) ((uint)((x-9)<<11)) /* FCC3 Receive Clock Source */ +#define CMXFCR_TF3CS(x) ((uint)((x-9)<<8)) /* FCC3 Transmit Clock Source */ + +#define PC_F1RXCLK PC_CLK(F1_RXCLK) +#define PC_F1TXCLK PC_CLK(F1_TXCLK) +#define CMX1_CLK_ROUTE (CMXFCR_RF1CS(F1_RXCLK) | CMXFCR_TF1CS(F1_TXCLK)) +#define CMX1_CLK_MASK ((uint)0xff000000) + +#define PC_F2RXCLK PC_CLK(F2_RXCLK) +#define PC_F2TXCLK PC_CLK(F2_TXCLK) +#define CMX2_CLK_ROUTE (CMXFCR_RF2CS(F2_RXCLK) | CMXFCR_TF2CS(F2_TXCLK)) +#define CMX2_CLK_MASK ((uint)0x00ff0000) + +#define PC_F3RXCLK PC_CLK(F3_RXCLK) +#define PC_F3TXCLK PC_CLK(F3_TXCLK) +#define CMX3_CLK_ROUTE (CMXFCR_RF3CS(F3_RXCLK) | CMXFCR_TF3CS(F3_TXCLK)) +#define CMX3_CLK_MASK ((uint)0x0000ff00) + +#define CPMUX_CLK_MASK (CMX3_CLK_MASK | CMX2_CLK_MASK) +#define CPMUX_CLK_ROUTE (CMX3_CLK_ROUTE | CMX2_CLK_ROUTE) + +#define CLK_TRX (PC_F3TXCLK | PC_F3RXCLK | PC_F2TXCLK | PC_F2RXCLK) + +/* I/O Pin assignment for FCC1. I don't yet know the best way to do this, + * but there is little variation among the choices. + */ +#define PA1_COL 0x00000001U +#define PA1_CRS 0x00000002U +#define PA1_TXER 0x00000004U +#define PA1_TXEN 0x00000008U +#define PA1_RXDV 0x00000010U +#define PA1_RXER 0x00000020U +#define PA1_TXDAT 0x00003c00U +#define PA1_RXDAT 0x0003c000U +#define PA1_PSORA0 (PA1_RXDAT | PA1_TXDAT) +#define PA1_PSORA1 (PA1_COL | PA1_CRS | PA1_TXER | PA1_TXEN | \ + PA1_RXDV | PA1_RXER) +#define PA1_DIRA0 (PA1_RXDAT | PA1_CRS | PA1_COL | PA1_RXER | PA1_RXDV) +#define PA1_DIRA1 (PA1_TXDAT | PA1_TXEN | PA1_TXER) + + +/* I/O Pin assignment for FCC2. I don't yet know the best way to do this, + * but there is little variation among the choices. + */ +#define PB2_TXER 0x00000001U +#define PB2_RXDV 0x00000002U +#define PB2_TXEN 0x00000004U +#define PB2_RXER 0x00000008U +#define PB2_COL 0x00000010U +#define PB2_CRS 0x00000020U +#define PB2_TXDAT 0x000003c0U +#define PB2_RXDAT 0x00003c00U +#define PB2_PSORB0 (PB2_RXDAT | PB2_TXDAT | PB2_CRS | PB2_COL | \ + PB2_RXER | PB2_RXDV | PB2_TXER) +#define PB2_PSORB1 (PB2_TXEN) +#define PB2_DIRB0 (PB2_RXDAT | PB2_CRS | PB2_COL | PB2_RXER | PB2_RXDV) +#define PB2_DIRB1 (PB2_TXDAT | PB2_TXEN | PB2_TXER) + + +/* I/O Pin assignment for FCC3. I don't yet know the best way to do this, + * but there is little variation among the choices. + */ +#define PB3_RXDV 0x00004000U +#define PB3_RXER 0x00008000U +#define PB3_TXER 0x00010000U +#define PB3_TXEN 0x00020000U +#define PB3_COL 0x00040000U +#define PB3_CRS 0x00080000U +#define PB3_TXDAT 0x0f000000U +#define PC3_TXDAT 0x00000010U +#define PB3_RXDAT 0x00f00000U +#define PB3_PSORB0 (PB3_RXDAT | PB3_TXDAT | PB3_CRS | PB3_COL | \ + PB3_RXER | PB3_RXDV | PB3_TXER | PB3_TXEN) +#define PB3_PSORB1 0 +#define PB3_DIRB0 (PB3_RXDAT | PB3_CRS | PB3_COL | PB3_RXER | PB3_RXDV) +#define PB3_DIRB1 (PB3_TXDAT | PB3_TXEN | PB3_TXER) +#define PC3_DIRC1 (PC3_TXDAT) + +/* Handy macro to specify mem for FCCs*/ +#define FCC_MEM_OFFSET(x) (CPM_FCC_SPECIAL_BASE + (x*128)) +#define FCC1_MEM_OFFSET FCC_MEM_OFFSET(0) +#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(1) +#define FCC3_MEM_OFFSET FCC_MEM_OFFSET(2) + +/* Clocks and GRG's */ + +enum cpm_clk_dir { + CPM_CLK_RX, + CPM_CLK_TX, + CPM_CLK_RTX +}; + +enum cpm_clk_target { + CPM_CLK_SCC1, + CPM_CLK_SCC2, + CPM_CLK_SCC3, + CPM_CLK_SCC4, + CPM_CLK_FCC1, + CPM_CLK_FCC2, + CPM_CLK_FCC3, + CPM_CLK_SMC1, + CPM_CLK_SMC2, +}; + +enum cpm_clk { + CPM_CLK_NONE = 0, + CPM_BRG1, /* Baud Rate Generator 1 */ + CPM_BRG2, /* Baud Rate Generator 2 */ + CPM_BRG3, /* Baud Rate Generator 3 */ + CPM_BRG4, /* Baud Rate Generator 4 */ + CPM_BRG5, /* Baud Rate Generator 5 */ + CPM_BRG6, /* Baud Rate Generator 6 */ + CPM_BRG7, /* Baud Rate Generator 7 */ + CPM_BRG8, /* Baud Rate Generator 8 */ + CPM_CLK1, /* Clock 1 */ + CPM_CLK2, /* Clock 2 */ + CPM_CLK3, /* Clock 3 */ + CPM_CLK4, /* Clock 4 */ + CPM_CLK5, /* Clock 5 */ + CPM_CLK6, /* Clock 6 */ + CPM_CLK7, /* Clock 7 */ + CPM_CLK8, /* Clock 8 */ + CPM_CLK9, /* Clock 9 */ + CPM_CLK10, /* Clock 10 */ + CPM_CLK11, /* Clock 11 */ + CPM_CLK12, /* Clock 12 */ + CPM_CLK13, /* Clock 13 */ + CPM_CLK14, /* Clock 14 */ + CPM_CLK15, /* Clock 15 */ + CPM_CLK16, /* Clock 16 */ + CPM_CLK17, /* Clock 17 */ + CPM_CLK18, /* Clock 18 */ + CPM_CLK19, /* Clock 19 */ + CPM_CLK20, /* Clock 20 */ + CPM_CLK_DUMMY +}; + +extern int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode); +extern int cpm2_smc_clk_setup(enum cpm_clk_target target, int clock); + +#define CPM_PIN_INPUT 0 +#define CPM_PIN_OUTPUT 1 +#define CPM_PIN_PRIMARY 0 +#define CPM_PIN_SECONDARY 2 +#define CPM_PIN_GPIO 4 +#define CPM_PIN_OPENDRAIN 8 + +void cpm2_set_pin(int port, int pin, int flags); + +#endif /* __CPM2__ */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h new file mode 100644 index 00000000000..ef8a248dfd5 --- /dev/null +++ b/arch/powerpc/include/asm/cputable.h @@ -0,0 +1,514 @@ +#ifndef __ASM_POWERPC_CPUTABLE_H +#define __ASM_POWERPC_CPUTABLE_H + +#define PPC_FEATURE_32 0x80000000 +#define PPC_FEATURE_64 0x40000000 +#define PPC_FEATURE_601_INSTR 0x20000000 +#define PPC_FEATURE_HAS_ALTIVEC 0x10000000 +#define PPC_FEATURE_HAS_FPU 0x08000000 +#define PPC_FEATURE_HAS_MMU 0x04000000 +#define PPC_FEATURE_HAS_4xxMAC 0x02000000 +#define PPC_FEATURE_UNIFIED_CACHE 0x01000000 +#define PPC_FEATURE_HAS_SPE 0x00800000 +#define PPC_FEATURE_HAS_EFP_SINGLE 0x00400000 +#define PPC_FEATURE_HAS_EFP_DOUBLE 0x00200000 +#define PPC_FEATURE_NO_TB 0x00100000 +#define PPC_FEATURE_POWER4 0x00080000 +#define PPC_FEATURE_POWER5 0x00040000 +#define PPC_FEATURE_POWER5_PLUS 0x00020000 +#define PPC_FEATURE_CELL 0x00010000 +#define PPC_FEATURE_BOOKE 0x00008000 +#define PPC_FEATURE_SMT 0x00004000 +#define PPC_FEATURE_ICACHE_SNOOP 0x00002000 +#define PPC_FEATURE_ARCH_2_05 0x00001000 +#define PPC_FEATURE_PA6T 0x00000800 +#define PPC_FEATURE_HAS_DFP 0x00000400 +#define PPC_FEATURE_POWER6_EXT 0x00000200 +#define PPC_FEATURE_ARCH_2_06 0x00000100 +#define PPC_FEATURE_HAS_VSX 0x00000080 + +#define PPC_FEATURE_PSERIES_PERFMON_COMPAT \ + 0x00000040 + +#define PPC_FEATURE_TRUE_LE 0x00000002 +#define PPC_FEATURE_PPC_LE 0x00000001 + +#ifdef __KERNEL__ + +#include +#include + +#ifndef __ASSEMBLY__ + +/* This structure can grow, it's real size is used by head.S code + * via the mkdefs mechanism. + */ +struct cpu_spec; + +typedef void (*cpu_setup_t)(unsigned long offset, struct cpu_spec* spec); +typedef void (*cpu_restore_t)(void); + +enum powerpc_oprofile_type { + PPC_OPROFILE_INVALID = 0, + PPC_OPROFILE_RS64 = 1, + PPC_OPROFILE_POWER4 = 2, + PPC_OPROFILE_G4 = 3, + PPC_OPROFILE_FSL_EMB = 4, + PPC_OPROFILE_CELL = 5, + PPC_OPROFILE_PA6T = 6, +}; + +enum powerpc_pmc_type { + PPC_PMC_DEFAULT = 0, + PPC_PMC_IBM = 1, + PPC_PMC_PA6T = 2, +}; + +struct pt_regs; + +extern int machine_check_generic(struct pt_regs *regs); +extern int machine_check_4xx(struct pt_regs *regs); +extern int machine_check_440A(struct pt_regs *regs); +extern int machine_check_e500(struct pt_regs *regs); +extern int machine_check_e200(struct pt_regs *regs); + +/* NOTE WELL: Update identify_cpu() if fields are added or removed! */ +struct cpu_spec { + /* CPU is matched via (PVR & pvr_mask) == pvr_value */ + unsigned int pvr_mask; + unsigned int pvr_value; + + char *cpu_name; + unsigned long cpu_features; /* Kernel features */ + unsigned int cpu_user_features; /* Userland features */ + + /* cache line sizes */ + unsigned int icache_bsize; + unsigned int dcache_bsize; + + /* number of performance monitor counters */ + unsigned int num_pmcs; + enum powerpc_pmc_type pmc_type; + + /* this is called to initialize various CPU bits like L1 cache, + * BHT, SPD, etc... from head.S before branching to identify_machine + */ + cpu_setup_t cpu_setup; + /* Used to restore cpu setup on secondary processors and at resume */ + cpu_restore_t cpu_restore; + + /* Used by oprofile userspace to select the right counters */ + char *oprofile_cpu_type; + + /* Processor specific oprofile operations */ + enum powerpc_oprofile_type oprofile_type; + + /* Bit locations inside the mmcra change */ + unsigned long oprofile_mmcra_sihv; + unsigned long oprofile_mmcra_sipr; + + /* Bits to clear during an oprofile exception */ + unsigned long oprofile_mmcra_clear; + + /* Name of processor class, for the ELF AT_PLATFORM entry */ + char *platform; + + /* Processor specific machine check handling. Return negative + * if the error is fatal, 1 if it was fully recovered and 0 to + * pass up (not CPU originated) */ + int (*machine_check)(struct pt_regs *regs); +}; + +extern struct cpu_spec *cur_cpu_spec; + +extern unsigned int __start___ftr_fixup, __stop___ftr_fixup; + +extern struct cpu_spec *identify_cpu(unsigned long offset, unsigned int pvr); +extern void do_feature_fixups(unsigned long value, void *fixup_start, + void *fixup_end); + +extern const char *powerpc_base_platform; + +#endif /* __ASSEMBLY__ */ + +/* CPU kernel features */ + +/* Retain the 32b definitions all use bottom half of word */ +#define CPU_FTR_COHERENT_ICACHE ASM_CONST(0x0000000000000001) +#define CPU_FTR_L2CR ASM_CONST(0x0000000000000002) +#define CPU_FTR_SPEC7450 ASM_CONST(0x0000000000000004) +#define CPU_FTR_ALTIVEC ASM_CONST(0x0000000000000008) +#define CPU_FTR_TAU ASM_CONST(0x0000000000000010) +#define CPU_FTR_CAN_DOZE ASM_CONST(0x0000000000000020) +#define CPU_FTR_USE_TB ASM_CONST(0x0000000000000040) +#define CPU_FTR_L2CSR ASM_CONST(0x0000000000000080) +#define CPU_FTR_601 ASM_CONST(0x0000000000000100) +#define CPU_FTR_HPTE_TABLE ASM_CONST(0x0000000000000200) +#define CPU_FTR_CAN_NAP ASM_CONST(0x0000000000000400) +#define CPU_FTR_L3CR ASM_CONST(0x0000000000000800) +#define CPU_FTR_L3_DISABLE_NAP ASM_CONST(0x0000000000001000) +#define CPU_FTR_NAP_DISABLE_L2_PR ASM_CONST(0x0000000000002000) +#define CPU_FTR_DUAL_PLL_750FX ASM_CONST(0x0000000000004000) +#define CPU_FTR_NO_DPM ASM_CONST(0x0000000000008000) +#define CPU_FTR_HAS_HIGH_BATS ASM_CONST(0x0000000000010000) +#define CPU_FTR_NEED_COHERENT ASM_CONST(0x0000000000020000) +#define CPU_FTR_NO_BTIC ASM_CONST(0x0000000000040000) +#define CPU_FTR_BIG_PHYS ASM_CONST(0x0000000000080000) +#define CPU_FTR_NODSISRALIGN ASM_CONST(0x0000000000100000) +#define CPU_FTR_PPC_LE ASM_CONST(0x0000000000200000) +#define CPU_FTR_REAL_LE ASM_CONST(0x0000000000400000) +#define CPU_FTR_FPU_UNAVAILABLE ASM_CONST(0x0000000000800000) +#define CPU_FTR_UNIFIED_ID_CACHE ASM_CONST(0x0000000001000000) +#define CPU_FTR_SPE ASM_CONST(0x0000000002000000) +#define CPU_FTR_NEED_PAIRED_STWCX ASM_CONST(0x0000000004000000) +#define CPU_FTR_LWSYNC ASM_CONST(0x0000000008000000) + +/* + * Add the 64-bit processor unique features in the top half of the word; + * on 32-bit, make the names available but defined to be 0. + */ +#ifdef __powerpc64__ +#define LONG_ASM_CONST(x) ASM_CONST(x) +#else +#define LONG_ASM_CONST(x) 0 +#endif + +#define CPU_FTR_SLB LONG_ASM_CONST(0x0000000100000000) +#define CPU_FTR_16M_PAGE LONG_ASM_CONST(0x0000000200000000) +#define CPU_FTR_TLBIEL LONG_ASM_CONST(0x0000000400000000) +#define CPU_FTR_NOEXECUTE LONG_ASM_CONST(0x0000000800000000) +#define CPU_FTR_IABR LONG_ASM_CONST(0x0000002000000000) +#define CPU_FTR_MMCRA LONG_ASM_CONST(0x0000004000000000) +#define CPU_FTR_CTRL LONG_ASM_CONST(0x0000008000000000) +#define CPU_FTR_SMT LONG_ASM_CONST(0x0000010000000000) +#define CPU_FTR_LOCKLESS_TLBIE LONG_ASM_CONST(0x0000040000000000) +#define CPU_FTR_CI_LARGE_PAGE LONG_ASM_CONST(0x0000100000000000) +#define CPU_FTR_PAUSE_ZERO LONG_ASM_CONST(0x0000200000000000) +#define CPU_FTR_PURR LONG_ASM_CONST(0x0000400000000000) +#define CPU_FTR_CELL_TB_BUG LONG_ASM_CONST(0x0000800000000000) +#define CPU_FTR_SPURR LONG_ASM_CONST(0x0001000000000000) +#define CPU_FTR_DSCR LONG_ASM_CONST(0x0002000000000000) +#define CPU_FTR_1T_SEGMENT LONG_ASM_CONST(0x0004000000000000) +#define CPU_FTR_NO_SLBIE_B LONG_ASM_CONST(0x0008000000000000) +#define CPU_FTR_VSX LONG_ASM_CONST(0x0010000000000000) +#define CPU_FTR_SAO LONG_ASM_CONST(0x0020000000000000) + +#ifndef __ASSEMBLY__ + +#define CPU_FTR_PPCAS_ARCH_V2 (CPU_FTR_SLB | \ + CPU_FTR_TLBIEL | CPU_FTR_NOEXECUTE | \ + CPU_FTR_NODSISRALIGN | CPU_FTR_16M_PAGE) + +/* We only set the altivec features if the kernel was compiled with altivec + * support + */ +#ifdef CONFIG_ALTIVEC +#define CPU_FTR_ALTIVEC_COMP CPU_FTR_ALTIVEC +#define PPC_FEATURE_HAS_ALTIVEC_COMP PPC_FEATURE_HAS_ALTIVEC +#else +#define CPU_FTR_ALTIVEC_COMP 0 +#define PPC_FEATURE_HAS_ALTIVEC_COMP 0 +#endif + +/* We only set the VSX features if the kernel was compiled with VSX + * support + */ +#ifdef CONFIG_VSX +#define CPU_FTR_VSX_COMP CPU_FTR_VSX +#define PPC_FEATURE_HAS_VSX_COMP PPC_FEATURE_HAS_VSX +#else +#define CPU_FTR_VSX_COMP 0 +#define PPC_FEATURE_HAS_VSX_COMP 0 +#endif + +/* We only set the spe features if the kernel was compiled with spe + * support + */ +#ifdef CONFIG_SPE +#define CPU_FTR_SPE_COMP CPU_FTR_SPE +#define PPC_FEATURE_HAS_SPE_COMP PPC_FEATURE_HAS_SPE +#define PPC_FEATURE_HAS_EFP_SINGLE_COMP PPC_FEATURE_HAS_EFP_SINGLE +#define PPC_FEATURE_HAS_EFP_DOUBLE_COMP PPC_FEATURE_HAS_EFP_DOUBLE +#else +#define CPU_FTR_SPE_COMP 0 +#define PPC_FEATURE_HAS_SPE_COMP 0 +#define PPC_FEATURE_HAS_EFP_SINGLE_COMP 0 +#define PPC_FEATURE_HAS_EFP_DOUBLE_COMP 0 +#endif + +/* We need to mark all pages as being coherent if we're SMP or we have a + * 74[45]x and an MPC107 host bridge. Also 83xx and PowerQUICC II + * require it for PCI "streaming/prefetch" to work properly. + */ +#if defined(CONFIG_SMP) || defined(CONFIG_MPC10X_BRIDGE) \ + || defined(CONFIG_PPC_83xx) || defined(CONFIG_8260) +#define CPU_FTR_COMMON CPU_FTR_NEED_COHERENT +#else +#define CPU_FTR_COMMON 0 +#endif + +/* The powersave features NAP & DOZE seems to confuse BDI when + debugging. So if a BDI is used, disable theses + */ +#ifndef CONFIG_BDI_SWITCH +#define CPU_FTR_MAYBE_CAN_DOZE CPU_FTR_CAN_DOZE +#define CPU_FTR_MAYBE_CAN_NAP CPU_FTR_CAN_NAP +#else +#define CPU_FTR_MAYBE_CAN_DOZE 0 +#define CPU_FTR_MAYBE_CAN_NAP 0 +#endif + +#define CLASSIC_PPC (!defined(CONFIG_8xx) && !defined(CONFIG_4xx) && \ + !defined(CONFIG_POWER3) && !defined(CONFIG_POWER4) && \ + !defined(CONFIG_BOOKE)) + +#define CPU_FTRS_PPC601 (CPU_FTR_COMMON | CPU_FTR_601 | CPU_FTR_HPTE_TABLE | \ + CPU_FTR_COHERENT_ICACHE | CPU_FTR_UNIFIED_ID_CACHE) +#define CPU_FTRS_603 (CPU_FTR_COMMON | \ + CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \ + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE) +#define CPU_FTRS_604 (CPU_FTR_COMMON | \ + CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_PPC_LE) +#define CPU_FTRS_740_NOTAU (CPU_FTR_COMMON | \ + CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \ + CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE) +#define CPU_FTRS_740 (CPU_FTR_COMMON | \ + CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \ + CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP | \ + CPU_FTR_PPC_LE) +#define CPU_FTRS_750 (CPU_FTR_COMMON | \ + CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \ + CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP | \ + CPU_FTR_PPC_LE) +#define CPU_FTRS_750CL (CPU_FTRS_750 | CPU_FTR_HAS_HIGH_BATS) +#define CPU_FTRS_750FX1 (CPU_FTRS_750 | CPU_FTR_DUAL_PLL_750FX | CPU_FTR_NO_DPM) +#define CPU_FTRS_750FX2 (CPU_FTRS_750 | CPU_FTR_NO_DPM) +#define CPU_FTRS_750FX (CPU_FTRS_750 | CPU_FTR_DUAL_PLL_750FX | \ + CPU_FTR_HAS_HIGH_BATS) +#define CPU_FTRS_750GX (CPU_FTRS_750FX) +#define CPU_FTRS_7400_NOTAU (CPU_FTR_COMMON | \ + CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \ + CPU_FTR_ALTIVEC_COMP | CPU_FTR_HPTE_TABLE | \ + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE) +#define CPU_FTRS_7400 (CPU_FTR_COMMON | \ + CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \ + CPU_FTR_TAU | CPU_FTR_ALTIVEC_COMP | CPU_FTR_HPTE_TABLE | \ + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE) +#define CPU_FTRS_7450_20 (CPU_FTR_COMMON | \ + CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ + CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \ + CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX) +#define CPU_FTRS_7450_21 (CPU_FTR_COMMON | \ + CPU_FTR_USE_TB | \ + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ + CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \ + CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_L3_DISABLE_NAP | \ + CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX) +#define CPU_FTRS_7450_23 (CPU_FTR_COMMON | \ + CPU_FTR_USE_TB | CPU_FTR_NEED_PAIRED_STWCX | \ + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ + CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \ + CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE) +#define CPU_FTRS_7455_1 (CPU_FTR_COMMON | \ + CPU_FTR_USE_TB | CPU_FTR_NEED_PAIRED_STWCX | \ + CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR | \ + CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | CPU_FTR_HAS_HIGH_BATS | \ + CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE) +#define CPU_FTRS_7455_20 (CPU_FTR_COMMON | \ + CPU_FTR_USE_TB | CPU_FTR_NEED_PAIRED_STWCX | \ + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ + CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \ + CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_L3_DISABLE_NAP | \ + CPU_FTR_NEED_COHERENT | CPU_FTR_HAS_HIGH_BATS | CPU_FTR_PPC_LE) +#define CPU_FTRS_7455 (CPU_FTR_COMMON | \ + CPU_FTR_USE_TB | \ + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ + CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \ + CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \ + CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX) +#define CPU_FTRS_7447_10 (CPU_FTR_COMMON | \ + CPU_FTR_USE_TB | \ + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ + CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \ + CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \ + CPU_FTR_NEED_COHERENT | CPU_FTR_NO_BTIC | CPU_FTR_PPC_LE | \ + CPU_FTR_NEED_PAIRED_STWCX) +#define CPU_FTRS_7447 (CPU_FTR_COMMON | \ + CPU_FTR_USE_TB | \ + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ + CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \ + CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \ + CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX) +#define CPU_FTRS_7447A (CPU_FTR_COMMON | \ + CPU_FTR_USE_TB | \ + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ + CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \ + CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \ + CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX) +#define CPU_FTRS_7448 (CPU_FTR_COMMON | \ + CPU_FTR_USE_TB | \ + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ + CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \ + CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \ + CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX) +#define CPU_FTRS_82XX (CPU_FTR_COMMON | \ + CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB) +#define CPU_FTRS_G2_LE (CPU_FTR_COMMON | CPU_FTR_MAYBE_CAN_DOZE | \ + CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS) +#define CPU_FTRS_E300 (CPU_FTR_MAYBE_CAN_DOZE | \ + CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS | \ + CPU_FTR_COMMON) +#define CPU_FTRS_E300C2 (CPU_FTR_MAYBE_CAN_DOZE | \ + CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS | \ + CPU_FTR_COMMON | CPU_FTR_FPU_UNAVAILABLE) +#define CPU_FTRS_CLASSIC32 (CPU_FTR_COMMON | \ + CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE) +#define CPU_FTRS_8XX (CPU_FTR_USE_TB) +#define CPU_FTRS_40X (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN) +#define CPU_FTRS_44X (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN) +#define CPU_FTRS_E200 (CPU_FTR_USE_TB | CPU_FTR_SPE_COMP | \ + CPU_FTR_NODSISRALIGN | CPU_FTR_COHERENT_ICACHE | \ + CPU_FTR_UNIFIED_ID_CACHE) +#define CPU_FTRS_E500 (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \ + CPU_FTR_SPE_COMP | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_NODSISRALIGN) +#define CPU_FTRS_E500_2 (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \ + CPU_FTR_SPE_COMP | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_BIG_PHYS | \ + CPU_FTR_NODSISRALIGN) +#define CPU_FTRS_E500MC (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \ + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_BIG_PHYS | CPU_FTR_NODSISRALIGN | \ + CPU_FTR_L2CSR | CPU_FTR_LWSYNC) +#define CPU_FTRS_GENERIC_32 (CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN) + +/* 64-bit CPUs */ +#define CPU_FTRS_POWER3 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ + CPU_FTR_HPTE_TABLE | CPU_FTR_IABR | CPU_FTR_PPC_LE) +#define CPU_FTRS_RS64 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ + CPU_FTR_HPTE_TABLE | CPU_FTR_IABR | \ + CPU_FTR_MMCRA | CPU_FTR_CTRL) +#define CPU_FTRS_POWER4 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ + CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ + CPU_FTR_MMCRA) +#define CPU_FTRS_PPC970 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ + CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ + CPU_FTR_ALTIVEC_COMP | CPU_FTR_CAN_NAP | CPU_FTR_MMCRA) +#define CPU_FTRS_POWER5 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ + CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ + CPU_FTR_MMCRA | CPU_FTR_SMT | \ + CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \ + CPU_FTR_PURR) +#define CPU_FTRS_POWER6 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ + CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ + CPU_FTR_MMCRA | CPU_FTR_SMT | \ + CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \ + CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \ + CPU_FTR_DSCR) +#define CPU_FTRS_POWER7 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ + CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ + CPU_FTR_MMCRA | CPU_FTR_SMT | \ + CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \ + CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \ + CPU_FTR_DSCR | CPU_FTR_SAO) +#define CPU_FTRS_CELL (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ + CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ + CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \ + CPU_FTR_PAUSE_ZERO | CPU_FTR_CI_LARGE_PAGE | CPU_FTR_CELL_TB_BUG) +#define CPU_FTRS_PA6T (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ + CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | \ + CPU_FTR_ALTIVEC_COMP | CPU_FTR_CI_LARGE_PAGE | \ + CPU_FTR_PURR | CPU_FTR_REAL_LE | CPU_FTR_NO_SLBIE_B) +#define CPU_FTRS_COMPATIBLE (CPU_FTR_USE_TB | \ + CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2) + +#ifdef __powerpc64__ +#define CPU_FTRS_POSSIBLE \ + (CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 | \ + CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_POWER6 | \ + CPU_FTRS_POWER7 | CPU_FTRS_CELL | CPU_FTRS_PA6T | \ + CPU_FTR_1T_SEGMENT | CPU_FTR_VSX) +#else +enum { + CPU_FTRS_POSSIBLE = +#if CLASSIC_PPC + CPU_FTRS_PPC601 | CPU_FTRS_603 | CPU_FTRS_604 | CPU_FTRS_740_NOTAU | + CPU_FTRS_740 | CPU_FTRS_750 | CPU_FTRS_750FX1 | + CPU_FTRS_750FX2 | CPU_FTRS_750FX | CPU_FTRS_750GX | + CPU_FTRS_7400_NOTAU | CPU_FTRS_7400 | CPU_FTRS_7450_20 | + CPU_FTRS_7450_21 | CPU_FTRS_7450_23 | CPU_FTRS_7455_1 | + CPU_FTRS_7455_20 | CPU_FTRS_7455 | CPU_FTRS_7447_10 | + CPU_FTRS_7447 | CPU_FTRS_7447A | CPU_FTRS_82XX | + CPU_FTRS_G2_LE | CPU_FTRS_E300 | CPU_FTRS_E300C2 | + CPU_FTRS_CLASSIC32 | +#else + CPU_FTRS_GENERIC_32 | +#endif +#ifdef CONFIG_8xx + CPU_FTRS_8XX | +#endif +#ifdef CONFIG_40x + CPU_FTRS_40X | +#endif +#ifdef CONFIG_44x + CPU_FTRS_44X | +#endif +#ifdef CONFIG_E200 + CPU_FTRS_E200 | +#endif +#ifdef CONFIG_E500 + CPU_FTRS_E500 | CPU_FTRS_E500_2 | CPU_FTRS_E500MC | +#endif + 0, +}; +#endif /* __powerpc64__ */ + +#ifdef __powerpc64__ +#define CPU_FTRS_ALWAYS \ + (CPU_FTRS_POWER3 & CPU_FTRS_RS64 & CPU_FTRS_POWER4 & \ + CPU_FTRS_PPC970 & CPU_FTRS_POWER5 & CPU_FTRS_POWER6 & \ + CPU_FTRS_POWER7 & CPU_FTRS_CELL & CPU_FTRS_PA6T & CPU_FTRS_POSSIBLE) +#else +enum { + CPU_FTRS_ALWAYS = +#if CLASSIC_PPC + CPU_FTRS_PPC601 & CPU_FTRS_603 & CPU_FTRS_604 & CPU_FTRS_740_NOTAU & + CPU_FTRS_740 & CPU_FTRS_750 & CPU_FTRS_750FX1 & + CPU_FTRS_750FX2 & CPU_FTRS_750FX & CPU_FTRS_750GX & + CPU_FTRS_7400_NOTAU & CPU_FTRS_7400 & CPU_FTRS_7450_20 & + CPU_FTRS_7450_21 & CPU_FTRS_7450_23 & CPU_FTRS_7455_1 & + CPU_FTRS_7455_20 & CPU_FTRS_7455 & CPU_FTRS_7447_10 & + CPU_FTRS_7447 & CPU_FTRS_7447A & CPU_FTRS_82XX & + CPU_FTRS_G2_LE & CPU_FTRS_E300 & CPU_FTRS_E300C2 & + CPU_FTRS_CLASSIC32 & +#else + CPU_FTRS_GENERIC_32 & +#endif +#ifdef CONFIG_8xx + CPU_FTRS_8XX & +#endif +#ifdef CONFIG_40x + CPU_FTRS_40X & +#endif +#ifdef CONFIG_44x + CPU_FTRS_44X & +#endif +#ifdef CONFIG_E200 + CPU_FTRS_E200 & +#endif +#ifdef CONFIG_E500 + CPU_FTRS_E500 & CPU_FTRS_E500_2 & CPU_FTRS_E500MC & +#endif + CPU_FTRS_POSSIBLE, +}; +#endif /* __powerpc64__ */ + +static inline int cpu_has_feature(unsigned long feature) +{ + return (CPU_FTRS_ALWAYS & feature) || + (CPU_FTRS_POSSIBLE + & cur_cpu_spec->cpu_features + & feature); +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* __KERNEL__ */ +#endif /* __ASM_POWERPC_CPUTABLE_H */ diff --git a/arch/powerpc/include/asm/cputhreads.h b/arch/powerpc/include/asm/cputhreads.h new file mode 100644 index 00000000000..fb11b0c459b --- /dev/null +++ b/arch/powerpc/include/asm/cputhreads.h @@ -0,0 +1,71 @@ +#ifndef _ASM_POWERPC_CPUTHREADS_H +#define _ASM_POWERPC_CPUTHREADS_H + +#include + +/* + * Mapping of threads to cores + */ + +#ifdef CONFIG_SMP +extern int threads_per_core; +extern int threads_shift; +extern cpumask_t threads_core_mask; +#else +#define threads_per_core 1 +#define threads_shift 0 +#define threads_core_mask (CPU_MASK_CPU0) +#endif + +/* cpu_thread_mask_to_cores - Return a cpumask of one per cores + * hit by the argument + * + * @threads: a cpumask of threads + * + * This function returns a cpumask which will have one "cpu" (or thread) + * bit set for each core that has at least one thread set in the argument. + * + * This can typically be used for things like IPI for tlb invalidations + * since those need to be done only once per core/TLB + */ +static inline cpumask_t cpu_thread_mask_to_cores(cpumask_t threads) +{ + cpumask_t tmp, res; + int i; + + res = CPU_MASK_NONE; + for (i = 0; i < NR_CPUS; i += threads_per_core) { + cpus_shift_left(tmp, threads_core_mask, i); + if (cpus_intersects(threads, tmp)) + cpu_set(i, res); + } + return res; +} + +static inline int cpu_nr_cores(void) +{ + return NR_CPUS >> threads_shift; +} + +static inline cpumask_t cpu_online_cores_map(void) +{ + return cpu_thread_mask_to_cores(cpu_online_map); +} + +static inline int cpu_thread_to_core(int cpu) +{ + return cpu >> threads_shift; +} + +static inline int cpu_thread_in_core(int cpu) +{ + return cpu & (threads_per_core - 1); +} + +static inline int cpu_first_thread_in_core(int cpu) +{ + return cpu & ~(threads_per_core - 1); +} + +#endif /* _ASM_POWERPC_CPUTHREADS_H */ + diff --git a/arch/powerpc/include/asm/cputime.h b/arch/powerpc/include/asm/cputime.h new file mode 100644 index 00000000000..f42e623030e --- /dev/null +++ b/arch/powerpc/include/asm/cputime.h @@ -0,0 +1,235 @@ +/* + * Definitions for measuring cputime on powerpc machines. + * + * Copyright (C) 2006 Paul Mackerras, IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * If we have CONFIG_VIRT_CPU_ACCOUNTING, we measure cpu time in + * the same units as the timebase. Otherwise we measure cpu time + * in jiffies using the generic definitions. + */ + +#ifndef __POWERPC_CPUTIME_H +#define __POWERPC_CPUTIME_H + +#ifndef CONFIG_VIRT_CPU_ACCOUNTING +#include +#else + +#include +#include +#include +#include +#include + +typedef u64 cputime_t; +typedef u64 cputime64_t; + +#define cputime_zero ((cputime_t)0) +#define cputime_max ((~((cputime_t)0) >> 1) - 1) +#define cputime_add(__a, __b) ((__a) + (__b)) +#define cputime_sub(__a, __b) ((__a) - (__b)) +#define cputime_div(__a, __n) ((__a) / (__n)) +#define cputime_halve(__a) ((__a) >> 1) +#define cputime_eq(__a, __b) ((__a) == (__b)) +#define cputime_gt(__a, __b) ((__a) > (__b)) +#define cputime_ge(__a, __b) ((__a) >= (__b)) +#define cputime_lt(__a, __b) ((__a) < (__b)) +#define cputime_le(__a, __b) ((__a) <= (__b)) + +#define cputime64_zero ((cputime64_t)0) +#define cputime64_add(__a, __b) ((__a) + (__b)) +#define cputime64_sub(__a, __b) ((__a) - (__b)) +#define cputime_to_cputime64(__ct) (__ct) + +#ifdef __KERNEL__ + +/* + * Convert cputime <-> jiffies + */ +extern u64 __cputime_jiffies_factor; +DECLARE_PER_CPU(unsigned long, cputime_last_delta); +DECLARE_PER_CPU(unsigned long, cputime_scaled_last_delta); + +static inline unsigned long cputime_to_jiffies(const cputime_t ct) +{ + return mulhdu(ct, __cputime_jiffies_factor); +} + +/* Estimate the scaled cputime by scaling the real cputime based on + * the last scaled to real ratio */ +static inline cputime_t cputime_to_scaled(const cputime_t ct) +{ + if (cpu_has_feature(CPU_FTR_SPURR) && + per_cpu(cputime_last_delta, smp_processor_id())) + return ct * + per_cpu(cputime_scaled_last_delta, smp_processor_id())/ + per_cpu(cputime_last_delta, smp_processor_id()); + return ct; +} + +static inline cputime_t jiffies_to_cputime(const unsigned long jif) +{ + cputime_t ct; + unsigned long sec; + + /* have to be a little careful about overflow */ + ct = jif % HZ; + sec = jif / HZ; + if (ct) { + ct *= tb_ticks_per_sec; + do_div(ct, HZ); + } + if (sec) + ct += (cputime_t) sec * tb_ticks_per_sec; + return ct; +} + +static inline cputime64_t jiffies64_to_cputime64(const u64 jif) +{ + cputime_t ct; + u64 sec; + + /* have to be a little careful about overflow */ + ct = jif % HZ; + sec = jif / HZ; + if (ct) { + ct *= tb_ticks_per_sec; + do_div(ct, HZ); + } + if (sec) + ct += (cputime_t) sec * tb_ticks_per_sec; + return ct; +} + +static inline u64 cputime64_to_jiffies64(const cputime_t ct) +{ + return mulhdu(ct, __cputime_jiffies_factor); +} + +/* + * Convert cputime <-> milliseconds + */ +extern u64 __cputime_msec_factor; + +static inline unsigned long cputime_to_msecs(const cputime_t ct) +{ + return mulhdu(ct, __cputime_msec_factor); +} + +static inline cputime_t msecs_to_cputime(const unsigned long ms) +{ + cputime_t ct; + unsigned long sec; + + /* have to be a little careful about overflow */ + ct = ms % 1000; + sec = ms / 1000; + if (ct) { + ct *= tb_ticks_per_sec; + do_div(ct, 1000); + } + if (sec) + ct += (cputime_t) sec * tb_ticks_per_sec; + return ct; +} + +/* + * Convert cputime <-> seconds + */ +extern u64 __cputime_sec_factor; + +static inline unsigned long cputime_to_secs(const cputime_t ct) +{ + return mulhdu(ct, __cputime_sec_factor); +} + +static inline cputime_t secs_to_cputime(const unsigned long sec) +{ + return (cputime_t) sec * tb_ticks_per_sec; +} + +/* + * Convert cputime <-> timespec + */ +static inline void cputime_to_timespec(const cputime_t ct, struct timespec *p) +{ + u64 x = ct; + unsigned int frac; + + frac = do_div(x, tb_ticks_per_sec); + p->tv_sec = x; + x = (u64) frac * 1000000000; + do_div(x, tb_ticks_per_sec); + p->tv_nsec = x; +} + +static inline cputime_t timespec_to_cputime(const struct timespec *p) +{ + cputime_t ct; + + ct = (u64) p->tv_nsec * tb_ticks_per_sec; + do_div(ct, 1000000000); + return ct + (u64) p->tv_sec * tb_ticks_per_sec; +} + +/* + * Convert cputime <-> timeval + */ +static inline void cputime_to_timeval(const cputime_t ct, struct timeval *p) +{ + u64 x = ct; + unsigned int frac; + + frac = do_div(x, tb_ticks_per_sec); + p->tv_sec = x; + x = (u64) frac * 1000000; + do_div(x, tb_ticks_per_sec); + p->tv_usec = x; +} + +static inline cputime_t timeval_to_cputime(const struct timeval *p) +{ + cputime_t ct; + + ct = (u64) p->tv_usec * tb_ticks_per_sec; + do_div(ct, 1000000); + return ct + (u64) p->tv_sec * tb_ticks_per_sec; +} + +/* + * Convert cputime <-> clock_t (units of 1/USER_HZ seconds) + */ +extern u64 __cputime_clockt_factor; + +static inline unsigned long cputime_to_clock_t(const cputime_t ct) +{ + return mulhdu(ct, __cputime_clockt_factor); +} + +static inline cputime_t clock_t_to_cputime(const unsigned long clk) +{ + cputime_t ct; + unsigned long sec; + + /* have to be a little careful about overflow */ + ct = clk % USER_HZ; + sec = clk / USER_HZ; + if (ct) { + ct *= tb_ticks_per_sec; + do_div(ct, USER_HZ); + } + if (sec) + ct += (cputime_t) sec * tb_ticks_per_sec; + return ct; +} + +#define cputime64_to_clock_t(ct) cputime_to_clock_t((cputime_t)(ct)) + +#endif /* __KERNEL__ */ +#endif /* CONFIG_VIRT_CPU_ACCOUNTING */ +#endif /* __POWERPC_CPUTIME_H */ diff --git a/arch/powerpc/include/asm/current.h b/arch/powerpc/include/asm/current.h new file mode 100644 index 00000000000..e2c7f06931e --- /dev/null +++ b/arch/powerpc/include/asm/current.h @@ -0,0 +1,40 @@ +#ifndef _ASM_POWERPC_CURRENT_H +#define _ASM_POWERPC_CURRENT_H +#ifdef __KERNEL__ + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +struct task_struct; + +#ifdef __powerpc64__ +#include +#include + +static inline struct task_struct *get_current(void) +{ + struct task_struct *task; + + __asm__ __volatile__("ld %0,%1(13)" + : "=r" (task) + : "i" (offsetof(struct paca_struct, __current))); + + return task; +} +#define current get_current() + +#else + +/* + * We keep `current' in r2 for speed. + */ +register struct task_struct *current asm ("r2"); + +#endif + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_CURRENT_H */ diff --git a/arch/powerpc/include/asm/dbdma.h b/arch/powerpc/include/asm/dbdma.h new file mode 100644 index 00000000000..e23f07e73cb --- /dev/null +++ b/arch/powerpc/include/asm/dbdma.h @@ -0,0 +1,108 @@ +/* + * Definitions for using the Apple Descriptor-Based DMA controller + * in Power Macintosh computers. + * + * Copyright (C) 1996 Paul Mackerras. + */ + +#ifdef __KERNEL__ +#ifndef _ASM_DBDMA_H_ +#define _ASM_DBDMA_H_ +/* + * DBDMA control/status registers. All little-endian. + */ +struct dbdma_regs { + unsigned int control; /* lets you change bits in status */ + unsigned int status; /* DMA and device status bits (see below) */ + unsigned int cmdptr_hi; /* upper 32 bits of command address */ + unsigned int cmdptr; /* (lower 32 bits of) command address (phys) */ + unsigned int intr_sel; /* select interrupt condition bit */ + unsigned int br_sel; /* select branch condition bit */ + unsigned int wait_sel; /* select wait condition bit */ + unsigned int xfer_mode; + unsigned int data2ptr_hi; + unsigned int data2ptr; + unsigned int res1; + unsigned int address_hi; + unsigned int br_addr_hi; + unsigned int res2[3]; +}; + +/* Bits in control and status registers */ +#define RUN 0x8000 +#define PAUSE 0x4000 +#define FLUSH 0x2000 +#define WAKE 0x1000 +#define DEAD 0x0800 +#define ACTIVE 0x0400 +#define BT 0x0100 +#define DEVSTAT 0x00ff + +/* + * DBDMA command structure. These fields are all little-endian! + */ +struct dbdma_cmd { + unsigned short req_count; /* requested byte transfer count */ + unsigned short command; /* command word (has bit-fields) */ + unsigned int phy_addr; /* physical data address */ + unsigned int cmd_dep; /* command-dependent field */ + unsigned short res_count; /* residual count after completion */ + unsigned short xfer_status; /* transfer status */ +}; + +/* DBDMA command values in command field */ +#define OUTPUT_MORE 0 /* transfer memory data to stream */ +#define OUTPUT_LAST 0x1000 /* ditto followed by end marker */ +#define INPUT_MORE 0x2000 /* transfer stream data to memory */ +#define INPUT_LAST 0x3000 /* ditto, expect end marker */ +#define STORE_WORD 0x4000 /* write word (4 bytes) to device reg */ +#define LOAD_WORD 0x5000 /* read word (4 bytes) from device reg */ +#define DBDMA_NOP 0x6000 /* do nothing */ +#define DBDMA_STOP 0x7000 /* suspend processing */ + +/* Key values in command field */ +#define KEY_STREAM0 0 /* usual data stream */ +#define KEY_STREAM1 0x100 /* control/status stream */ +#define KEY_STREAM2 0x200 /* device-dependent stream */ +#define KEY_STREAM3 0x300 /* device-dependent stream */ +#define KEY_REGS 0x500 /* device register space */ +#define KEY_SYSTEM 0x600 /* system memory-mapped space */ +#define KEY_DEVICE 0x700 /* device memory-mapped space */ + +/* Interrupt control values in command field */ +#define INTR_NEVER 0 /* don't interrupt */ +#define INTR_IFSET 0x10 /* intr if condition bit is 1 */ +#define INTR_IFCLR 0x20 /* intr if condition bit is 0 */ +#define INTR_ALWAYS 0x30 /* always interrupt */ + +/* Branch control values in command field */ +#define BR_NEVER 0 /* don't branch */ +#define BR_IFSET 0x4 /* branch if condition bit is 1 */ +#define BR_IFCLR 0x8 /* branch if condition bit is 0 */ +#define BR_ALWAYS 0xc /* always branch */ + +/* Wait control values in command field */ +#define WAIT_NEVER 0 /* don't wait */ +#define WAIT_IFSET 1 /* wait if condition bit is 1 */ +#define WAIT_IFCLR 2 /* wait if condition bit is 0 */ +#define WAIT_ALWAYS 3 /* always wait */ + +/* Align an address for a DBDMA command structure */ +#define DBDMA_ALIGN(x) (((unsigned long)(x) + sizeof(struct dbdma_cmd) - 1) \ + & -sizeof(struct dbdma_cmd)) + +/* Useful macros */ +#define DBDMA_DO_STOP(regs) do { \ + out_le32(&((regs)->control), (RUN|FLUSH)<<16); \ + while(in_le32(&((regs)->status)) & (ACTIVE|FLUSH)) \ + ; \ +} while(0) + +#define DBDMA_DO_RESET(regs) do { \ + out_le32(&((regs)->control), (ACTIVE|DEAD|WAKE|FLUSH|PAUSE|RUN)<<16);\ + while(in_le32(&((regs)->status)) & (RUN)) \ + ; \ +} while(0) + +#endif /* _ASM_DBDMA_H_ */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/dcr-generic.h b/arch/powerpc/include/asm/dcr-generic.h new file mode 100644 index 00000000000..35b71599ec4 --- /dev/null +++ b/arch/powerpc/include/asm/dcr-generic.h @@ -0,0 +1,49 @@ +/* + * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ASM_POWERPC_DCR_GENERIC_H +#define _ASM_POWERPC_DCR_GENERIC_H +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ + +enum host_type_t {DCR_HOST_MMIO, DCR_HOST_NATIVE, DCR_HOST_INVALID}; + +typedef struct { + enum host_type_t type; + union { + dcr_host_mmio_t mmio; + dcr_host_native_t native; + } host; +} dcr_host_t; + +extern bool dcr_map_ok_generic(dcr_host_t host); + +extern dcr_host_t dcr_map_generic(struct device_node *dev, unsigned int dcr_n, + unsigned int dcr_c); +extern void dcr_unmap_generic(dcr_host_t host, unsigned int dcr_c); + +extern u32 dcr_read_generic(dcr_host_t host, unsigned int dcr_n); + +extern void dcr_write_generic(dcr_host_t host, unsigned int dcr_n, u32 value); + +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_DCR_GENERIC_H */ + + diff --git a/arch/powerpc/include/asm/dcr-mmio.h b/arch/powerpc/include/asm/dcr-mmio.h new file mode 100644 index 00000000000..acd491dbd45 --- /dev/null +++ b/arch/powerpc/include/asm/dcr-mmio.h @@ -0,0 +1,61 @@ +/* + * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ASM_POWERPC_DCR_MMIO_H +#define _ASM_POWERPC_DCR_MMIO_H +#ifdef __KERNEL__ + +#include + +typedef struct { + void __iomem *token; + unsigned int stride; + unsigned int base; +} dcr_host_mmio_t; + +static inline bool dcr_map_ok_mmio(dcr_host_mmio_t host) +{ + return host.token != NULL; +} + +extern dcr_host_mmio_t dcr_map_mmio(struct device_node *dev, + unsigned int dcr_n, + unsigned int dcr_c); +extern void dcr_unmap_mmio(dcr_host_mmio_t host, unsigned int dcr_c); + +static inline u32 dcr_read_mmio(dcr_host_mmio_t host, unsigned int dcr_n) +{ + return in_be32(host.token + ((host.base + dcr_n) * host.stride)); +} + +static inline void dcr_write_mmio(dcr_host_mmio_t host, + unsigned int dcr_n, + u32 value) +{ + out_be32(host.token + ((host.base + dcr_n) * host.stride), value); +} + +extern u64 of_translate_dcr_address(struct device_node *dev, + unsigned int dcr_n, + unsigned int *stride); + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_DCR_MMIO_H */ + + diff --git a/arch/powerpc/include/asm/dcr-native.h b/arch/powerpc/include/asm/dcr-native.h new file mode 100644 index 00000000000..72d2b72c739 --- /dev/null +++ b/arch/powerpc/include/asm/dcr-native.h @@ -0,0 +1,116 @@ +/* + * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ASM_POWERPC_DCR_NATIVE_H +#define _ASM_POWERPC_DCR_NATIVE_H +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ + +#include + +typedef struct { + unsigned int base; +} dcr_host_native_t; + +static inline bool dcr_map_ok_native(dcr_host_native_t host) +{ + return 1; +} + +#define dcr_map_native(dev, dcr_n, dcr_c) \ + ((dcr_host_native_t){ .base = (dcr_n) }) +#define dcr_unmap_native(host, dcr_c) do {} while (0) +#define dcr_read_native(host, dcr_n) mfdcr(dcr_n + host.base) +#define dcr_write_native(host, dcr_n, value) mtdcr(dcr_n + host.base, value) + +/* Device Control Registers */ +void __mtdcr(int reg, unsigned int val); +unsigned int __mfdcr(int reg); +#define mfdcr(rn) \ + ({unsigned int rval; \ + if (__builtin_constant_p(rn)) \ + asm volatile("mfdcr %0," __stringify(rn) \ + : "=r" (rval)); \ + else \ + rval = __mfdcr(rn); \ + rval;}) + +#define mtdcr(rn, v) \ +do { \ + if (__builtin_constant_p(rn)) \ + asm volatile("mtdcr " __stringify(rn) ",%0" \ + : : "r" (v)); \ + else \ + __mtdcr(rn, v); \ +} while (0) + +/* R/W of indirect DCRs make use of standard naming conventions for DCRs */ +extern spinlock_t dcr_ind_lock; + +static inline unsigned __mfdcri(int base_addr, int base_data, int reg) +{ + unsigned long flags; + unsigned int val; + + spin_lock_irqsave(&dcr_ind_lock, flags); + __mtdcr(base_addr, reg); + val = __mfdcr(base_data); + spin_unlock_irqrestore(&dcr_ind_lock, flags); + return val; +} + +static inline void __mtdcri(int base_addr, int base_data, int reg, + unsigned val) +{ + unsigned long flags; + + spin_lock_irqsave(&dcr_ind_lock, flags); + __mtdcr(base_addr, reg); + __mtdcr(base_data, val); + spin_unlock_irqrestore(&dcr_ind_lock, flags); +} + +static inline void __dcri_clrset(int base_addr, int base_data, int reg, + unsigned clr, unsigned set) +{ + unsigned long flags; + unsigned int val; + + spin_lock_irqsave(&dcr_ind_lock, flags); + __mtdcr(base_addr, reg); + val = (__mfdcr(base_data) & ~clr) | set; + __mtdcr(base_data, val); + spin_unlock_irqrestore(&dcr_ind_lock, flags); +} + +#define mfdcri(base, reg) __mfdcri(DCRN_ ## base ## _CONFIG_ADDR, \ + DCRN_ ## base ## _CONFIG_DATA, \ + reg) + +#define mtdcri(base, reg, data) __mtdcri(DCRN_ ## base ## _CONFIG_ADDR, \ + DCRN_ ## base ## _CONFIG_DATA, \ + reg, data) + +#define dcri_clrset(base, reg, clr, set) __dcri_clrset(DCRN_ ## base ## _CONFIG_ADDR, \ + DCRN_ ## base ## _CONFIG_DATA, \ + reg, clr, set) + +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_DCR_NATIVE_H */ diff --git a/arch/powerpc/include/asm/dcr-regs.h b/arch/powerpc/include/asm/dcr-regs.h new file mode 100644 index 00000000000..29b0ecef980 --- /dev/null +++ b/arch/powerpc/include/asm/dcr-regs.h @@ -0,0 +1,149 @@ +/* + * Common DCR / SDR / CPR register definitions used on various IBM/AMCC + * 4xx processors + * + * Copyright 2007 Benjamin Herrenschmidt, IBM Corp + * + * + * Mostly lifted from asm-ppc/ibm4xx.h by + * + * Copyright (c) 1999 Grant Erickson + * + */ + +#ifndef __DCR_REGS_H__ +#define __DCR_REGS_H__ + +/* + * Most DCRs used for controlling devices such as the MAL, DMA engine, + * etc... are obtained for the device tree. + * + * The definitions in this files are fixed DCRs and indirect DCRs that + * are commonly used outside of specific drivers or refer to core + * common registers that may occasionally have to be tweaked outside + * of the driver main register set + */ + +/* CPRs (440GX and 440SP/440SPe) */ +#define DCRN_CPR0_CONFIG_ADDR 0xc +#define DCRN_CPR0_CONFIG_DATA 0xd + +/* SDRs (440GX and 440SP/440SPe) */ +#define DCRN_SDR0_CONFIG_ADDR 0xe +#define DCRN_SDR0_CONFIG_DATA 0xf + +#define SDR0_PFC0 0x4100 +#define SDR0_PFC1 0x4101 +#define SDR0_PFC1_EPS 0x1c00000 +#define SDR0_PFC1_EPS_SHIFT 22 +#define SDR0_PFC1_RMII 0x02000000 +#define SDR0_MFR 0x4300 +#define SDR0_MFR_TAH0 0x80000000 /* TAHOE0 Enable */ +#define SDR0_MFR_TAH1 0x40000000 /* TAHOE1 Enable */ +#define SDR0_MFR_PCM 0x10000000 /* PPC440GP irq compat mode */ +#define SDR0_MFR_ECS 0x08000000 /* EMAC int clk */ +#define SDR0_MFR_T0TXFL 0x00080000 +#define SDR0_MFR_T0TXFH 0x00040000 +#define SDR0_MFR_T1TXFL 0x00020000 +#define SDR0_MFR_T1TXFH 0x00010000 +#define SDR0_MFR_E0TXFL 0x00008000 +#define SDR0_MFR_E0TXFH 0x00004000 +#define SDR0_MFR_E0RXFL 0x00002000 +#define SDR0_MFR_E0RXFH 0x00001000 +#define SDR0_MFR_E1TXFL 0x00000800 +#define SDR0_MFR_E1TXFH 0x00000400 +#define SDR0_MFR_E1RXFL 0x00000200 +#define SDR0_MFR_E1RXFH 0x00000100 +#define SDR0_MFR_E2TXFL 0x00000080 +#define SDR0_MFR_E2TXFH 0x00000040 +#define SDR0_MFR_E2RXFL 0x00000020 +#define SDR0_MFR_E2RXFH 0x00000010 +#define SDR0_MFR_E3TXFL 0x00000008 +#define SDR0_MFR_E3TXFH 0x00000004 +#define SDR0_MFR_E3RXFL 0x00000002 +#define SDR0_MFR_E3RXFH 0x00000001 +#define SDR0_UART0 0x0120 +#define SDR0_UART1 0x0121 +#define SDR0_UART2 0x0122 +#define SDR0_UART3 0x0123 +#define SDR0_CUST0 0x4000 + +/* + * All those DCR register addresses are offsets from the base address + * for the SRAM0 controller (e.g. 0x20 on 440GX). The base address is + * excluded here and configured in the device tree. + */ +#define DCRN_SRAM0_SB0CR 0x00 +#define DCRN_SRAM0_SB1CR 0x01 +#define DCRN_SRAM0_SB2CR 0x02 +#define DCRN_SRAM0_SB3CR 0x03 +#define SRAM_SBCR_BU_MASK 0x00000180 +#define SRAM_SBCR_BS_64KB 0x00000800 +#define SRAM_SBCR_BU_RO 0x00000080 +#define SRAM_SBCR_BU_RW 0x00000180 +#define DCRN_SRAM0_BEAR 0x04 +#define DCRN_SRAM0_BESR0 0x05 +#define DCRN_SRAM0_BESR1 0x06 +#define DCRN_SRAM0_PMEG 0x07 +#define DCRN_SRAM0_CID 0x08 +#define DCRN_SRAM0_REVID 0x09 +#define DCRN_SRAM0_DPC 0x0a +#define SRAM_DPC_ENABLE 0x80000000 + +/* + * All those DCR register addresses are offsets from the base address + * for the SRAM0 controller (e.g. 0x30 on 440GX). The base address is + * excluded here and configured in the device tree. + */ +#define DCRN_L2C0_CFG 0x00 +#define L2C_CFG_L2M 0x80000000 +#define L2C_CFG_ICU 0x40000000 +#define L2C_CFG_DCU 0x20000000 +#define L2C_CFG_DCW_MASK 0x1e000000 +#define L2C_CFG_TPC 0x01000000 +#define L2C_CFG_CPC 0x00800000 +#define L2C_CFG_FRAN 0x00200000 +#define L2C_CFG_SS_MASK 0x00180000 +#define L2C_CFG_SS_256 0x00000000 +#define L2C_CFG_CPIM 0x00040000 +#define L2C_CFG_TPIM 0x00020000 +#define L2C_CFG_LIM 0x00010000 +#define L2C_CFG_PMUX_MASK 0x00007000 +#define L2C_CFG_PMUX_SNP 0x00000000 +#define L2C_CFG_PMUX_IF 0x00001000 +#define L2C_CFG_PMUX_DF 0x00002000 +#define L2C_CFG_PMUX_DS 0x00003000 +#define L2C_CFG_PMIM 0x00000800 +#define L2C_CFG_TPEI 0x00000400 +#define L2C_CFG_CPEI 0x00000200 +#define L2C_CFG_NAM 0x00000100 +#define L2C_CFG_SMCM 0x00000080 +#define L2C_CFG_NBRM 0x00000040 +#define L2C_CFG_RDBW 0x00000008 /* only 460EX/GT */ +#define DCRN_L2C0_CMD 0x01 +#define L2C_CMD_CLR 0x80000000 +#define L2C_CMD_DIAG 0x40000000 +#define L2C_CMD_INV 0x20000000 +#define L2C_CMD_CCP 0x10000000 +#define L2C_CMD_CTE 0x08000000 +#define L2C_CMD_STRC 0x04000000 +#define L2C_CMD_STPC 0x02000000 +#define L2C_CMD_RPMC 0x01000000 +#define L2C_CMD_HCC 0x00800000 +#define DCRN_L2C0_ADDR 0x02 +#define DCRN_L2C0_DATA 0x03 +#define DCRN_L2C0_SR 0x04 +#define L2C_SR_CC 0x80000000 +#define L2C_SR_CPE 0x40000000 +#define L2C_SR_TPE 0x20000000 +#define L2C_SR_LRU 0x10000000 +#define L2C_SR_PCS 0x08000000 +#define DCRN_L2C0_REVID 0x05 +#define DCRN_L2C0_SNP0 0x06 +#define DCRN_L2C0_SNP1 0x07 +#define L2C_SNP_BA_MASK 0xffff0000 +#define L2C_SNP_SSR_MASK 0x0000f000 +#define L2C_SNP_SSR_32G 0x0000f000 +#define L2C_SNP_ESR 0x00000800 + +#endif /* __DCR_REGS_H__ */ diff --git a/arch/powerpc/include/asm/dcr.h b/arch/powerpc/include/asm/dcr.h new file mode 100644 index 00000000000..53b283050ab --- /dev/null +++ b/arch/powerpc/include/asm/dcr.h @@ -0,0 +1,82 @@ +/* + * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ASM_POWERPC_DCR_H +#define _ASM_POWERPC_DCR_H +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ +#ifdef CONFIG_PPC_DCR + +#ifdef CONFIG_PPC_DCR_NATIVE +#include +#endif + +#ifdef CONFIG_PPC_DCR_MMIO +#include +#endif + + +/* Indirection layer for providing both NATIVE and MMIO support. */ + +#if defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO) + +#include + +#define DCR_MAP_OK(host) dcr_map_ok_generic(host) +#define dcr_map(dev, dcr_n, dcr_c) dcr_map_generic(dev, dcr_n, dcr_c) +#define dcr_unmap(host, dcr_c) dcr_unmap_generic(host, dcr_c) +#define dcr_read(host, dcr_n) dcr_read_generic(host, dcr_n) +#define dcr_write(host, dcr_n, value) dcr_write_generic(host, dcr_n, value) + +#else + +#ifdef CONFIG_PPC_DCR_NATIVE +typedef dcr_host_native_t dcr_host_t; +#define DCR_MAP_OK(host) dcr_map_ok_native(host) +#define dcr_map(dev, dcr_n, dcr_c) dcr_map_native(dev, dcr_n, dcr_c) +#define dcr_unmap(host, dcr_c) dcr_unmap_native(host, dcr_c) +#define dcr_read(host, dcr_n) dcr_read_native(host, dcr_n) +#define dcr_write(host, dcr_n, value) dcr_write_native(host, dcr_n, value) +#else +typedef dcr_host_mmio_t dcr_host_t; +#define DCR_MAP_OK(host) dcr_map_ok_mmio(host) +#define dcr_map(dev, dcr_n, dcr_c) dcr_map_mmio(dev, dcr_n, dcr_c) +#define dcr_unmap(host, dcr_c) dcr_unmap_mmio(host, dcr_c) +#define dcr_read(host, dcr_n) dcr_read_mmio(host, dcr_n) +#define dcr_write(host, dcr_n, value) dcr_write_mmio(host, dcr_n, value) +#endif + +#endif /* defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO) */ + +/* + * On CONFIG_PPC_MERGE, we have additional helpers to read the DCR + * base from the device-tree + */ +#ifdef CONFIG_PPC_MERGE +struct device_node; +extern unsigned int dcr_resource_start(struct device_node *np, + unsigned int index); +extern unsigned int dcr_resource_len(struct device_node *np, + unsigned int index); +#endif /* CONFIG_PPC_MERGE */ + +#endif /* CONFIG_PPC_DCR */ +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_DCR_H */ diff --git a/arch/powerpc/include/asm/delay.h b/arch/powerpc/include/asm/delay.h new file mode 100644 index 00000000000..f9200a65c63 --- /dev/null +++ b/arch/powerpc/include/asm/delay.h @@ -0,0 +1,34 @@ +#ifndef _ASM_POWERPC_DELAY_H +#define _ASM_POWERPC_DELAY_H +#ifdef __KERNEL__ + +/* + * Copyright 1996, Paul Mackerras. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * PPC64 Support added by Dave Engebretsen, Todd Inglett, Mike Corrigan, + * Anton Blanchard. + */ + +extern void __delay(unsigned long loops); +extern void udelay(unsigned long usecs); + +/* + * On shared processor machines the generic implementation of mdelay can + * result in large errors. While each iteration of the loop inside mdelay + * is supposed to take 1ms, the hypervisor could sleep our partition for + * longer (eg 10ms). With the right timing these errors can add up. + * + * Since there is no 32bit overflow issue on 64bit kernels, just call + * udelay directly. + */ +#ifdef CONFIG_PPC64 +#define mdelay(n) udelay((n) * 1000) +#endif + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_DELAY_H */ diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h new file mode 100644 index 00000000000..228ab2a315b --- /dev/null +++ b/arch/powerpc/include/asm/device.h @@ -0,0 +1,24 @@ +/* + * Arch specific extensions to struct device + * + * This file is released under the GPLv2 + */ +#ifndef _ASM_POWERPC_DEVICE_H +#define _ASM_POWERPC_DEVICE_H + +struct dma_mapping_ops; +struct device_node; + +struct dev_archdata { + /* Optional pointer to an OF device node */ + struct device_node *of_node; + + /* DMA operations on that device */ + struct dma_mapping_ops *dma_ops; + void *dma_data; + + /* NUMA node if applicable */ + int numa_node; +}; + +#endif /* _ASM_POWERPC_DEVICE_H */ diff --git a/arch/powerpc/include/asm/div64.h b/arch/powerpc/include/asm/div64.h new file mode 100644 index 00000000000..6cd978cefb2 --- /dev/null +++ b/arch/powerpc/include/asm/div64.h @@ -0,0 +1 @@ +#include diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h new file mode 100644 index 00000000000..c7ca45f97dd --- /dev/null +++ b/arch/powerpc/include/asm/dma-mapping.h @@ -0,0 +1,474 @@ +/* + * Copyright (C) 2004 IBM + * + * Implements the generic device dma API for powerpc. + * the pci and vio busses + */ +#ifndef _ASM_DMA_MAPPING_H +#define _ASM_DMA_MAPPING_H +#ifdef __KERNEL__ + +#include +#include +/* need struct page definitions */ +#include +#include +#include +#include + +#define DMA_ERROR_CODE (~(dma_addr_t)0x0) + +#ifdef CONFIG_NOT_COHERENT_CACHE +/* + * DMA-consistent mapping functions for PowerPCs that don't support + * cache snooping. These allocate/free a region of uncached mapped + * memory space for use with DMA devices. Alternatively, you could + * allocate the space "normally" and use the cache management functions + * to ensure it is consistent. + */ +extern void *__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp); +extern void __dma_free_coherent(size_t size, void *vaddr); +extern void __dma_sync(void *vaddr, size_t size, int direction); +extern void __dma_sync_page(struct page *page, unsigned long offset, + size_t size, int direction); + +#else /* ! CONFIG_NOT_COHERENT_CACHE */ +/* + * Cache coherent cores. + */ + +#define __dma_alloc_coherent(gfp, size, handle) NULL +#define __dma_free_coherent(size, addr) ((void)0) +#define __dma_sync(addr, size, rw) ((void)0) +#define __dma_sync_page(pg, off, sz, rw) ((void)0) + +#endif /* ! CONFIG_NOT_COHERENT_CACHE */ + +#ifdef CONFIG_PPC64 + +static inline unsigned long device_to_mask(struct device *dev) +{ + if (dev->dma_mask && *dev->dma_mask) + return *dev->dma_mask; + /* Assume devices without mask can take 32 bit addresses */ + return 0xfffffffful; +} + +/* + * DMA operations are abstracted for G5 vs. i/pSeries, PCI vs. VIO + */ +struct dma_mapping_ops { + void * (*alloc_coherent)(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag); + void (*free_coherent)(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle); + dma_addr_t (*map_single)(struct device *dev, void *ptr, + size_t size, enum dma_data_direction direction, + struct dma_attrs *attrs); + void (*unmap_single)(struct device *dev, dma_addr_t dma_addr, + size_t size, enum dma_data_direction direction, + struct dma_attrs *attrs); + int (*map_sg)(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction direction, + struct dma_attrs *attrs); + void (*unmap_sg)(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction direction, + struct dma_attrs *attrs); + int (*dma_supported)(struct device *dev, u64 mask); + int (*set_dma_mask)(struct device *dev, u64 dma_mask); +}; + +static inline struct dma_mapping_ops *get_dma_ops(struct device *dev) +{ + /* We don't handle the NULL dev case for ISA for now. We could + * do it via an out of line call but it is not needed for now. The + * only ISA DMA device we support is the floppy and we have a hack + * in the floppy driver directly to get a device for us. + */ + if (unlikely(dev == NULL || dev->archdata.dma_ops == NULL)) + return NULL; + return dev->archdata.dma_ops; +} + +static inline void set_dma_ops(struct device *dev, struct dma_mapping_ops *ops) +{ + dev->archdata.dma_ops = ops; +} + +static inline int dma_supported(struct device *dev, u64 mask) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + if (unlikely(dma_ops == NULL)) + return 0; + if (dma_ops->dma_supported == NULL) + return 1; + return dma_ops->dma_supported(dev, mask); +} + +/* We have our own implementation of pci_set_dma_mask() */ +#define HAVE_ARCH_PCI_SET_DMA_MASK + +static inline int dma_set_mask(struct device *dev, u64 dma_mask) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + if (unlikely(dma_ops == NULL)) + return -EIO; + if (dma_ops->set_dma_mask != NULL) + return dma_ops->set_dma_mask(dev, dma_mask); + if (!dev->dma_mask || !dma_supported(dev, dma_mask)) + return -EIO; + *dev->dma_mask = dma_mask; + return 0; +} + +static inline dma_addr_t dma_map_single_attrs(struct device *dev, + void *cpu_addr, + size_t size, + enum dma_data_direction direction, + struct dma_attrs *attrs) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + BUG_ON(!dma_ops); + return dma_ops->map_single(dev, cpu_addr, size, direction, attrs); +} + +static inline void dma_unmap_single_attrs(struct device *dev, + dma_addr_t dma_addr, + size_t size, + enum dma_data_direction direction, + struct dma_attrs *attrs) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + BUG_ON(!dma_ops); + dma_ops->unmap_single(dev, dma_addr, size, direction, attrs); +} + +static inline dma_addr_t dma_map_page_attrs(struct device *dev, + struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction direction, + struct dma_attrs *attrs) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + BUG_ON(!dma_ops); + return dma_ops->map_single(dev, page_address(page) + offset, size, + direction, attrs); +} + +static inline void dma_unmap_page_attrs(struct device *dev, + dma_addr_t dma_address, + size_t size, + enum dma_data_direction direction, + struct dma_attrs *attrs) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + BUG_ON(!dma_ops); + dma_ops->unmap_single(dev, dma_address, size, direction, attrs); +} + +static inline int dma_map_sg_attrs(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction direction, + struct dma_attrs *attrs) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + BUG_ON(!dma_ops); + return dma_ops->map_sg(dev, sg, nents, direction, attrs); +} + +static inline void dma_unmap_sg_attrs(struct device *dev, + struct scatterlist *sg, + int nhwentries, + enum dma_data_direction direction, + struct dma_attrs *attrs) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + BUG_ON(!dma_ops); + dma_ops->unmap_sg(dev, sg, nhwentries, direction, attrs); +} + +static inline void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + BUG_ON(!dma_ops); + return dma_ops->alloc_coherent(dev, size, dma_handle, flag); +} + +static inline void dma_free_coherent(struct device *dev, size_t size, + void *cpu_addr, dma_addr_t dma_handle) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + BUG_ON(!dma_ops); + dma_ops->free_coherent(dev, size, cpu_addr, dma_handle); +} + +static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr, + size_t size, + enum dma_data_direction direction) +{ + return dma_map_single_attrs(dev, cpu_addr, size, direction, NULL); +} + +static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, + size_t size, + enum dma_data_direction direction) +{ + dma_unmap_single_attrs(dev, dma_addr, size, direction, NULL); +} + +static inline dma_addr_t dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction direction) +{ + return dma_map_page_attrs(dev, page, offset, size, direction, NULL); +} + +static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address, + size_t size, + enum dma_data_direction direction) +{ + dma_unmap_page_attrs(dev, dma_address, size, direction, NULL); +} + +static inline int dma_map_sg(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction direction) +{ + return dma_map_sg_attrs(dev, sg, nents, direction, NULL); +} + +static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg, + int nhwentries, + enum dma_data_direction direction) +{ + dma_unmap_sg_attrs(dev, sg, nhwentries, direction, NULL); +} + +/* + * Available generic sets of operations + */ +extern struct dma_mapping_ops dma_iommu_ops; +extern struct dma_mapping_ops dma_direct_ops; + +#else /* CONFIG_PPC64 */ + +#define dma_supported(dev, mask) (1) + +static inline int dma_set_mask(struct device *dev, u64 dma_mask) +{ + if (!dev->dma_mask || !dma_supported(dev, mask)) + return -EIO; + + *dev->dma_mask = dma_mask; + + return 0; +} + +static inline void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t * dma_handle, + gfp_t gfp) +{ +#ifdef CONFIG_NOT_COHERENT_CACHE + return __dma_alloc_coherent(size, dma_handle, gfp); +#else + void *ret; + /* ignore region specifiers */ + gfp &= ~(__GFP_DMA | __GFP_HIGHMEM); + + if (dev == NULL || dev->coherent_dma_mask < 0xffffffff) + gfp |= GFP_DMA; + + ret = (void *)__get_free_pages(gfp, get_order(size)); + + if (ret != NULL) { + memset(ret, 0, size); + *dma_handle = virt_to_bus(ret); + } + + return ret; +#endif +} + +static inline void +dma_free_coherent(struct device *dev, size_t size, void *vaddr, + dma_addr_t dma_handle) +{ +#ifdef CONFIG_NOT_COHERENT_CACHE + __dma_free_coherent(size, vaddr); +#else + free_pages((unsigned long)vaddr, get_order(size)); +#endif +} + +static inline dma_addr_t +dma_map_single(struct device *dev, void *ptr, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + + __dma_sync(ptr, size, direction); + + return virt_to_bus(ptr); +} + +static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, + size_t size, + enum dma_data_direction direction) +{ + /* We do nothing. */ +} + +static inline dma_addr_t +dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + + __dma_sync_page(page, offset, size, direction); + + return page_to_bus(page) + offset; +} + +static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address, + size_t size, + enum dma_data_direction direction) +{ + /* We do nothing. */ +} + +static inline int +dma_map_sg(struct device *dev, struct scatterlist *sgl, int nents, + enum dma_data_direction direction) +{ + struct scatterlist *sg; + int i; + + BUG_ON(direction == DMA_NONE); + + for_each_sg(sgl, sg, nents, i) { + BUG_ON(!sg_page(sg)); + __dma_sync_page(sg_page(sg), sg->offset, sg->length, direction); + sg->dma_address = page_to_bus(sg_page(sg)) + sg->offset; + } + + return nents; +} + +static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg, + int nhwentries, + enum dma_data_direction direction) +{ + /* We don't do anything here. */ +} + +#endif /* CONFIG_PPC64 */ + +static inline void dma_sync_single_for_cpu(struct device *dev, + dma_addr_t dma_handle, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + __dma_sync(bus_to_virt(dma_handle), size, direction); +} + +static inline void dma_sync_single_for_device(struct device *dev, + dma_addr_t dma_handle, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + __dma_sync(bus_to_virt(dma_handle), size, direction); +} + +static inline void dma_sync_sg_for_cpu(struct device *dev, + struct scatterlist *sgl, int nents, + enum dma_data_direction direction) +{ + struct scatterlist *sg; + int i; + + BUG_ON(direction == DMA_NONE); + + for_each_sg(sgl, sg, nents, i) + __dma_sync_page(sg_page(sg), sg->offset, sg->length, direction); +} + +static inline void dma_sync_sg_for_device(struct device *dev, + struct scatterlist *sgl, int nents, + enum dma_data_direction direction) +{ + struct scatterlist *sg; + int i; + + BUG_ON(direction == DMA_NONE); + + for_each_sg(sgl, sg, nents, i) + __dma_sync_page(sg_page(sg), sg->offset, sg->length, direction); +} + +static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) +{ +#ifdef CONFIG_PPC64 + return (dma_addr == DMA_ERROR_CODE); +#else + return 0; +#endif +} + +#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) +#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) +#ifdef CONFIG_NOT_COHERENT_CACHE +#define dma_is_consistent(d, h) (0) +#else +#define dma_is_consistent(d, h) (1) +#endif + +static inline int dma_get_cache_alignment(void) +{ +#ifdef CONFIG_PPC64 + /* no easy way to get cache size on all processors, so return + * the maximum possible, to be safe */ + return (1 << INTERNODE_CACHE_SHIFT); +#else + /* + * Each processor family will define its own L1_CACHE_SHIFT, + * L1_CACHE_BYTES wraps to this, so this is always safe. + */ + return L1_CACHE_BYTES; +#endif +} + +static inline void dma_sync_single_range_for_cpu(struct device *dev, + dma_addr_t dma_handle, unsigned long offset, size_t size, + enum dma_data_direction direction) +{ + /* just sync everything for now */ + dma_sync_single_for_cpu(dev, dma_handle, offset + size, direction); +} + +static inline void dma_sync_single_range_for_device(struct device *dev, + dma_addr_t dma_handle, unsigned long offset, size_t size, + enum dma_data_direction direction) +{ + /* just sync everything for now */ + dma_sync_single_for_device(dev, dma_handle, offset + size, direction); +} + +static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + __dma_sync(vaddr, size, (int)direction); +} + +#endif /* __KERNEL__ */ +#endif /* _ASM_DMA_MAPPING_H */ diff --git a/arch/powerpc/include/asm/dma.h b/arch/powerpc/include/asm/dma.h new file mode 100644 index 00000000000..a7e06e25c70 --- /dev/null +++ b/arch/powerpc/include/asm/dma.h @@ -0,0 +1,360 @@ +#ifndef _ASM_POWERPC_DMA_H +#define _ASM_POWERPC_DMA_H +#ifdef __KERNEL__ + +/* + * Defines for using and allocating dma channels. + * Written by Hennus Bergman, 1992. + * High DMA channel support & info by Hannu Savolainen + * and John Boyd, Nov. 1992. + * Changes for ppc sound by Christoph Nadig + */ + +/* + * Note: Adapted for PowerPC by Gary Thomas + * Modified by Cort Dougan + * + * None of this really applies for Power Macintoshes. There is + * basically just enough here to get kernel/dma.c to compile. + * + * There may be some comments or restrictions made here which are + * not valid for the PReP platform. Take what you read + * with a grain of salt. + */ + +#include +#include +#include + +#ifndef MAX_DMA_CHANNELS +#define MAX_DMA_CHANNELS 8 +#endif + +/* The maximum address that we can perform a DMA transfer to on this platform */ +/* Doesn't really apply... */ +#define MAX_DMA_ADDRESS (~0UL) + +#if !defined(CONFIG_PPC_ISERIES) || defined(CONFIG_PCI) + +#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER +#define dma_outb outb_p +#else +#define dma_outb outb +#endif + +#define dma_inb inb + +/* + * NOTES about DMA transfers: + * + * controller 1: channels 0-3, byte operations, ports 00-1F + * controller 2: channels 4-7, word operations, ports C0-DF + * + * - ALL registers are 8 bits only, regardless of transfer size + * - channel 4 is not used - cascades 1 into 2. + * - channels 0-3 are byte - addresses/counts are for physical bytes + * - channels 5-7 are word - addresses/counts are for physical words + * - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries + * - transfer count loaded to registers is 1 less than actual count + * - controller 2 offsets are all even (2x offsets for controller 1) + * - page registers for 5-7 don't use data bit 0, represent 128K pages + * - page registers for 0-3 use bit 0, represent 64K pages + * + * On PReP, DMA transfers are limited to the lower 16MB of _physical_ memory. + * On CHRP, the W83C553F (and VLSI Tollgate?) support full 32 bit addressing. + * Note that addresses loaded into registers must be _physical_ addresses, + * not logical addresses (which may differ if paging is active). + * + * Address mapping for channels 0-3: + * + * A23 ... A16 A15 ... A8 A7 ... A0 (Physical addresses) + * | ... | | ... | | ... | + * | ... | | ... | | ... | + * | ... | | ... | | ... | + * P7 ... P0 A7 ... A0 A7 ... A0 + * | Page | Addr MSB | Addr LSB | (DMA registers) + * + * Address mapping for channels 5-7: + * + * A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0 (Physical addresses) + * | ... | \ \ ... \ \ \ ... \ \ + * | ... | \ \ ... \ \ \ ... \ (not used) + * | ... | \ \ ... \ \ \ ... \ + * P7 ... P1 (0) A7 A6 ... A0 A7 A6 ... A0 + * | Page | Addr MSB | Addr LSB | (DMA registers) + * + * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses + * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at + * the hardware level, so odd-byte transfers aren't possible). + * + * Transfer count (_not # bytes_) is limited to 64K, represented as actual + * count - 1 : 64K => 0xFFFF, 1 => 0x0000. Thus, count is always 1 or more, + * and up to 128K bytes may be transferred on channels 5-7 in one operation. + * + */ + +/* 8237 DMA controllers */ +#define IO_DMA1_BASE 0x00 /* 8 bit slave DMA, channels 0..3 */ +#define IO_DMA2_BASE 0xC0 /* 16 bit master DMA, ch 4(=slave input)..7 */ + +/* DMA controller registers */ +#define DMA1_CMD_REG 0x08 /* command register (w) */ +#define DMA1_STAT_REG 0x08 /* status register (r) */ +#define DMA1_REQ_REG 0x09 /* request register (w) */ +#define DMA1_MASK_REG 0x0A /* single-channel mask (w) */ +#define DMA1_MODE_REG 0x0B /* mode register (w) */ +#define DMA1_CLEAR_FF_REG 0x0C /* clear pointer flip-flop (w) */ +#define DMA1_TEMP_REG 0x0D /* Temporary Register (r) */ +#define DMA1_RESET_REG 0x0D /* Master Clear (w) */ +#define DMA1_CLR_MASK_REG 0x0E /* Clear Mask */ +#define DMA1_MASK_ALL_REG 0x0F /* all-channels mask (w) */ + +#define DMA2_CMD_REG 0xD0 /* command register (w) */ +#define DMA2_STAT_REG 0xD0 /* status register (r) */ +#define DMA2_REQ_REG 0xD2 /* request register (w) */ +#define DMA2_MASK_REG 0xD4 /* single-channel mask (w) */ +#define DMA2_MODE_REG 0xD6 /* mode register (w) */ +#define DMA2_CLEAR_FF_REG 0xD8 /* clear pointer flip-flop (w) */ +#define DMA2_TEMP_REG 0xDA /* Temporary Register (r) */ +#define DMA2_RESET_REG 0xDA /* Master Clear (w) */ +#define DMA2_CLR_MASK_REG 0xDC /* Clear Mask */ +#define DMA2_MASK_ALL_REG 0xDE /* all-channels mask (w) */ + +#define DMA_ADDR_0 0x00 /* DMA address registers */ +#define DMA_ADDR_1 0x02 +#define DMA_ADDR_2 0x04 +#define DMA_ADDR_3 0x06 +#define DMA_ADDR_4 0xC0 +#define DMA_ADDR_5 0xC4 +#define DMA_ADDR_6 0xC8 +#define DMA_ADDR_7 0xCC + +#define DMA_CNT_0 0x01 /* DMA count registers */ +#define DMA_CNT_1 0x03 +#define DMA_CNT_2 0x05 +#define DMA_CNT_3 0x07 +#define DMA_CNT_4 0xC2 +#define DMA_CNT_5 0xC6 +#define DMA_CNT_6 0xCA +#define DMA_CNT_7 0xCE + +#define DMA_LO_PAGE_0 0x87 /* DMA page registers */ +#define DMA_LO_PAGE_1 0x83 +#define DMA_LO_PAGE_2 0x81 +#define DMA_LO_PAGE_3 0x82 +#define DMA_LO_PAGE_5 0x8B +#define DMA_LO_PAGE_6 0x89 +#define DMA_LO_PAGE_7 0x8A + +#define DMA_HI_PAGE_0 0x487 /* DMA page registers */ +#define DMA_HI_PAGE_1 0x483 +#define DMA_HI_PAGE_2 0x481 +#define DMA_HI_PAGE_3 0x482 +#define DMA_HI_PAGE_5 0x48B +#define DMA_HI_PAGE_6 0x489 +#define DMA_HI_PAGE_7 0x48A + +#define DMA1_EXT_REG 0x40B +#define DMA2_EXT_REG 0x4D6 + +#ifndef __powerpc64__ + /* in arch/ppc/kernel/setup.c -- Cort */ + extern unsigned int DMA_MODE_WRITE; + extern unsigned int DMA_MODE_READ; + extern unsigned long ISA_DMA_THRESHOLD; +#else + #define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */ + #define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */ +#endif + +#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */ + +#define DMA_AUTOINIT 0x10 + +extern spinlock_t dma_spin_lock; + +static __inline__ unsigned long claim_dma_lock(void) +{ + unsigned long flags; + spin_lock_irqsave(&dma_spin_lock, flags); + return flags; +} + +static __inline__ void release_dma_lock(unsigned long flags) +{ + spin_unlock_irqrestore(&dma_spin_lock, flags); +} + +/* enable/disable a specific DMA channel */ +static __inline__ void enable_dma(unsigned int dmanr) +{ + unsigned char ucDmaCmd = 0x00; + + if (dmanr != 4) { + dma_outb(0, DMA2_MASK_REG); /* This may not be enabled */ + dma_outb(ucDmaCmd, DMA2_CMD_REG); /* Enable group */ + } + if (dmanr <= 3) { + dma_outb(dmanr, DMA1_MASK_REG); + dma_outb(ucDmaCmd, DMA1_CMD_REG); /* Enable group */ + } else { + dma_outb(dmanr & 3, DMA2_MASK_REG); + } +} + +static __inline__ void disable_dma(unsigned int dmanr) +{ + if (dmanr <= 3) + dma_outb(dmanr | 4, DMA1_MASK_REG); + else + dma_outb((dmanr & 3) | 4, DMA2_MASK_REG); +} + +/* Clear the 'DMA Pointer Flip Flop'. + * Write 0 for LSB/MSB, 1 for MSB/LSB access. + * Use this once to initialize the FF to a known state. + * After that, keep track of it. :-) + * --- In order to do that, the DMA routines below should --- + * --- only be used while interrupts are disabled! --- + */ +static __inline__ void clear_dma_ff(unsigned int dmanr) +{ + if (dmanr <= 3) + dma_outb(0, DMA1_CLEAR_FF_REG); + else + dma_outb(0, DMA2_CLEAR_FF_REG); +} + +/* set mode (above) for a specific DMA channel */ +static __inline__ void set_dma_mode(unsigned int dmanr, char mode) +{ + if (dmanr <= 3) + dma_outb(mode | dmanr, DMA1_MODE_REG); + else + dma_outb(mode | (dmanr & 3), DMA2_MODE_REG); +} + +/* Set only the page register bits of the transfer address. + * This is used for successive transfers when we know the contents of + * the lower 16 bits of the DMA current address register, but a 64k boundary + * may have been crossed. + */ +static __inline__ void set_dma_page(unsigned int dmanr, int pagenr) +{ + switch (dmanr) { + case 0: + dma_outb(pagenr, DMA_LO_PAGE_0); + dma_outb(pagenr >> 8, DMA_HI_PAGE_0); + break; + case 1: + dma_outb(pagenr, DMA_LO_PAGE_1); + dma_outb(pagenr >> 8, DMA_HI_PAGE_1); + break; + case 2: + dma_outb(pagenr, DMA_LO_PAGE_2); + dma_outb(pagenr >> 8, DMA_HI_PAGE_2); + break; + case 3: + dma_outb(pagenr, DMA_LO_PAGE_3); + dma_outb(pagenr >> 8, DMA_HI_PAGE_3); + break; + case 5: + dma_outb(pagenr & 0xfe, DMA_LO_PAGE_5); + dma_outb(pagenr >> 8, DMA_HI_PAGE_5); + break; + case 6: + dma_outb(pagenr & 0xfe, DMA_LO_PAGE_6); + dma_outb(pagenr >> 8, DMA_HI_PAGE_6); + break; + case 7: + dma_outb(pagenr & 0xfe, DMA_LO_PAGE_7); + dma_outb(pagenr >> 8, DMA_HI_PAGE_7); + break; + } +} + +/* Set transfer address & page bits for specific DMA channel. + * Assumes dma flipflop is clear. + */ +static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int phys) +{ + if (dmanr <= 3) { + dma_outb(phys & 0xff, + ((dmanr & 3) << 1) + IO_DMA1_BASE); + dma_outb((phys >> 8) & 0xff, + ((dmanr & 3) << 1) + IO_DMA1_BASE); + } else { + dma_outb((phys >> 1) & 0xff, + ((dmanr & 3) << 2) + IO_DMA2_BASE); + dma_outb((phys >> 9) & 0xff, + ((dmanr & 3) << 2) + IO_DMA2_BASE); + } + set_dma_page(dmanr, phys >> 16); +} + + +/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for + * a specific DMA channel. + * You must ensure the parameters are valid. + * NOTE: from a manual: "the number of transfers is one more + * than the initial word count"! This is taken into account. + * Assumes dma flip-flop is clear. + * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7. + */ +static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) +{ + count--; + if (dmanr <= 3) { + dma_outb(count & 0xff, + ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE); + dma_outb((count >> 8) & 0xff, + ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE); + } else { + dma_outb((count >> 1) & 0xff, + ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE); + dma_outb((count >> 9) & 0xff, + ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE); + } +} + + +/* Get DMA residue count. After a DMA transfer, this + * should return zero. Reading this while a DMA transfer is + * still in progress will return unpredictable results. + * If called before the channel has been used, it may return 1. + * Otherwise, it returns the number of _bytes_ left to transfer. + * + * Assumes DMA flip-flop is clear. + */ +static __inline__ int get_dma_residue(unsigned int dmanr) +{ + unsigned int io_port = (dmanr <= 3) + ? ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE + : ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE; + + /* using short to get 16-bit wrap around */ + unsigned short count; + + count = 1 + dma_inb(io_port); + count += dma_inb(io_port) << 8; + + return (dmanr <= 3) ? count : (count << 1); +} + +/* These are in kernel/dma.c: */ + +/* reserve a DMA channel */ +extern int request_dma(unsigned int dmanr, const char *device_id); +/* release it again */ +extern void free_dma(unsigned int dmanr); + +#ifdef CONFIG_PCI +extern int isa_dma_bridge_buggy; +#else +#define isa_dma_bridge_buggy (0) +#endif + +#endif /* !defined(CONFIG_PPC_ISERIES) || defined(CONFIG_PCI) */ + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_DMA_H */ diff --git a/arch/powerpc/include/asm/edac.h b/arch/powerpc/include/asm/edac.h new file mode 100644 index 00000000000..6ead88bbfbb --- /dev/null +++ b/arch/powerpc/include/asm/edac.h @@ -0,0 +1,40 @@ +/* + * PPC EDAC common defs + * + * Author: Dave Jiang + * + * 2007 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef ASM_EDAC_H +#define ASM_EDAC_H +/* + * ECC atomic, DMA, SMP and interrupt safe scrub function. + * Implements the per arch atomic_scrub() that EDAC use for software + * ECC scrubbing. It reads memory and then writes back the original + * value, allowing the hardware to detect and correct memory errors. + */ +static __inline__ void atomic_scrub(void *va, u32 size) +{ + unsigned int *virt_addr = va; + unsigned int temp; + unsigned int i; + + for (i = 0; i < size / sizeof(*virt_addr); i++, virt_addr++) { + /* Very carefully read and write to memory atomically + * so we are interrupt, DMA and SMP safe. + */ + __asm__ __volatile__ ("\n\ + 1: lwarx %0,0,%1\n\ + stwcx. %0,0,%1\n\ + bne- 1b\n\ + isync" + : "=&r"(temp) + : "r"(virt_addr) + : "cr0", "memory"); + } +} + +#endif diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h new file mode 100644 index 00000000000..b886bec6701 --- /dev/null +++ b/arch/powerpc/include/asm/eeh.h @@ -0,0 +1,211 @@ +/* + * eeh.h + * Copyright (C) 2001 Dave Engebretsen & Todd Inglett IBM Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _PPC64_EEH_H +#define _PPC64_EEH_H +#ifdef __KERNEL__ + +#include +#include +#include + +struct pci_dev; +struct pci_bus; +struct device_node; + +#ifdef CONFIG_EEH + +extern int eeh_subsystem_enabled; + +/* Values for eeh_mode bits in device_node */ +#define EEH_MODE_SUPPORTED (1<<0) +#define EEH_MODE_NOCHECK (1<<1) +#define EEH_MODE_ISOLATED (1<<2) +#define EEH_MODE_RECOVERING (1<<3) +#define EEH_MODE_IRQ_DISABLED (1<<4) + +/* Max number of EEH freezes allowed before we consider the device + * to be permanently disabled. */ +#define EEH_MAX_ALLOWED_FREEZES 5 + +void __init eeh_init(void); +unsigned long eeh_check_failure(const volatile void __iomem *token, + unsigned long val); +int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev); +void __init pci_addr_cache_build(void); + +/** + * eeh_add_device_early + * eeh_add_device_late + * + * Perform eeh initialization for devices added after boot. + * Call eeh_add_device_early before doing any i/o to the + * device (including config space i/o). Call eeh_add_device_late + * to finish the eeh setup for this device. + */ +void eeh_add_device_tree_early(struct device_node *); +void eeh_add_device_tree_late(struct pci_bus *); + +/** + * eeh_remove_device_recursive - undo EEH for device & children. + * @dev: pci device to be removed + * + * As above, this removes the device; it also removes child + * pci devices as well. + */ +void eeh_remove_bus_device(struct pci_dev *); + +/** + * EEH_POSSIBLE_ERROR() -- test for possible MMIO failure. + * + * If this macro yields TRUE, the caller relays to eeh_check_failure() + * which does further tests out of line. + */ +#define EEH_POSSIBLE_ERROR(val, type) ((val) == (type)~0 && eeh_subsystem_enabled) + +/* + * Reads from a device which has been isolated by EEH will return + * all 1s. This macro gives an all-1s value of the given size (in + * bytes: 1, 2, or 4) for comparing with the result of a read. + */ +#define EEH_IO_ERROR_VALUE(size) (~0U >> ((4 - (size)) * 8)) + +#else /* !CONFIG_EEH */ +static inline void eeh_init(void) { } + +static inline unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned long val) +{ + return val; +} + +static inline int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) +{ + return 0; +} + +static inline void pci_addr_cache_build(void) { } + +static inline void eeh_add_device_tree_early(struct device_node *dn) { } + +static inline void eeh_add_device_tree_late(struct pci_bus *bus) { } + +static inline void eeh_remove_bus_device(struct pci_dev *dev) { } +#define EEH_POSSIBLE_ERROR(val, type) (0) +#define EEH_IO_ERROR_VALUE(size) (-1UL) +#endif /* CONFIG_EEH */ + +/* + * MMIO read/write operations with EEH support. + */ +static inline u8 eeh_readb(const volatile void __iomem *addr) +{ + u8 val = in_8(addr); + if (EEH_POSSIBLE_ERROR(val, u8)) + return eeh_check_failure(addr, val); + return val; +} + +static inline u16 eeh_readw(const volatile void __iomem *addr) +{ + u16 val = in_le16(addr); + if (EEH_POSSIBLE_ERROR(val, u16)) + return eeh_check_failure(addr, val); + return val; +} + +static inline u32 eeh_readl(const volatile void __iomem *addr) +{ + u32 val = in_le32(addr); + if (EEH_POSSIBLE_ERROR(val, u32)) + return eeh_check_failure(addr, val); + return val; +} + +static inline u64 eeh_readq(const volatile void __iomem *addr) +{ + u64 val = in_le64(addr); + if (EEH_POSSIBLE_ERROR(val, u64)) + return eeh_check_failure(addr, val); + return val; +} + +static inline u16 eeh_readw_be(const volatile void __iomem *addr) +{ + u16 val = in_be16(addr); + if (EEH_POSSIBLE_ERROR(val, u16)) + return eeh_check_failure(addr, val); + return val; +} + +static inline u32 eeh_readl_be(const volatile void __iomem *addr) +{ + u32 val = in_be32(addr); + if (EEH_POSSIBLE_ERROR(val, u32)) + return eeh_check_failure(addr, val); + return val; +} + +static inline u64 eeh_readq_be(const volatile void __iomem *addr) +{ + u64 val = in_be64(addr); + if (EEH_POSSIBLE_ERROR(val, u64)) + return eeh_check_failure(addr, val); + return val; +} + +static inline void eeh_memcpy_fromio(void *dest, const + volatile void __iomem *src, + unsigned long n) +{ + _memcpy_fromio(dest, src, n); + + /* Look for ffff's here at dest[n]. Assume that at least 4 bytes + * were copied. Check all four bytes. + */ + if (n >= 4 && EEH_POSSIBLE_ERROR(*((u32 *)(dest + n - 4)), u32)) + eeh_check_failure(src, *((u32 *)(dest + n - 4))); +} + +/* in-string eeh macros */ +static inline void eeh_readsb(const volatile void __iomem *addr, void * buf, + int ns) +{ + _insb(addr, buf, ns); + if (EEH_POSSIBLE_ERROR((*(((u8*)buf)+ns-1)), u8)) + eeh_check_failure(addr, *(u8*)buf); +} + +static inline void eeh_readsw(const volatile void __iomem *addr, void * buf, + int ns) +{ + _insw(addr, buf, ns); + if (EEH_POSSIBLE_ERROR((*(((u16*)buf)+ns-1)), u16)) + eeh_check_failure(addr, *(u16*)buf); +} + +static inline void eeh_readsl(const volatile void __iomem *addr, void * buf, + int nl) +{ + _insl(addr, buf, nl); + if (EEH_POSSIBLE_ERROR((*(((u32*)buf)+nl-1)), u32)) + eeh_check_failure(addr, *(u32*)buf); +} + +#endif /* __KERNEL__ */ +#endif /* _PPC64_EEH_H */ diff --git a/arch/powerpc/include/asm/eeh_event.h b/arch/powerpc/include/asm/eeh_event.h new file mode 100644 index 00000000000..cc3cb04539a --- /dev/null +++ b/arch/powerpc/include/asm/eeh_event.h @@ -0,0 +1,53 @@ +/* + * eeh_event.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Copyright (c) 2005 Linas Vepstas + */ + +#ifndef ASM_POWERPC_EEH_EVENT_H +#define ASM_POWERPC_EEH_EVENT_H +#ifdef __KERNEL__ + +/** EEH event -- structure holding pci controller data that describes + * a change in the isolation status of a PCI slot. A pointer + * to this struct is passed as the data pointer in a notify callback. + */ +struct eeh_event { + struct list_head list; + struct device_node *dn; /* struct device node */ + struct pci_dev *dev; /* affected device */ +}; + +/** + * eeh_send_failure_event - generate a PCI error event + * @dev pci device + * + * This routine builds a PCI error event which will be delivered + * to all listeners on the eeh_notifier_chain. + * + * This routine can be called within an interrupt context; + * the actual event will be delivered in a normal context + * (from a workqueue). + */ +int eeh_send_failure_event (struct device_node *dn, + struct pci_dev *dev); + +/* Main recovery function */ +struct pci_dn * handle_eeh_events (struct eeh_event *); + +#endif /* __KERNEL__ */ +#endif /* ASM_POWERPC_EEH_EVENT_H */ diff --git a/arch/powerpc/include/asm/elf.h b/arch/powerpc/include/asm/elf.h new file mode 100644 index 00000000000..80d1f399ee5 --- /dev/null +++ b/arch/powerpc/include/asm/elf.h @@ -0,0 +1,424 @@ +#ifndef _ASM_POWERPC_ELF_H +#define _ASM_POWERPC_ELF_H + +#ifdef __KERNEL__ +#include /* for task_struct */ +#include +#include +#endif + +#include +#include +#include +#include + +/* PowerPC relocations defined by the ABIs */ +#define R_PPC_NONE 0 +#define R_PPC_ADDR32 1 /* 32bit absolute address */ +#define R_PPC_ADDR24 2 /* 26bit address, 2 bits ignored. */ +#define R_PPC_ADDR16 3 /* 16bit absolute address */ +#define R_PPC_ADDR16_LO 4 /* lower 16bit of absolute address */ +#define R_PPC_ADDR16_HI 5 /* high 16bit of absolute address */ +#define R_PPC_ADDR16_HA 6 /* adjusted high 16bit */ +#define R_PPC_ADDR14 7 /* 16bit address, 2 bits ignored */ +#define R_PPC_ADDR14_BRTAKEN 8 +#define R_PPC_ADDR14_BRNTAKEN 9 +#define R_PPC_REL24 10 /* PC relative 26 bit */ +#define R_PPC_REL14 11 /* PC relative 16 bit */ +#define R_PPC_REL14_BRTAKEN 12 +#define R_PPC_REL14_BRNTAKEN 13 +#define R_PPC_GOT16 14 +#define R_PPC_GOT16_LO 15 +#define R_PPC_GOT16_HI 16 +#define R_PPC_GOT16_HA 17 +#define R_PPC_PLTREL24 18 +#define R_PPC_COPY 19 +#define R_PPC_GLOB_DAT 20 +#define R_PPC_JMP_SLOT 21 +#define R_PPC_RELATIVE 22 +#define R_PPC_LOCAL24PC 23 +#define R_PPC_UADDR32 24 +#define R_PPC_UADDR16 25 +#define R_PPC_REL32 26 +#define R_PPC_PLT32 27 +#define R_PPC_PLTREL32 28 +#define R_PPC_PLT16_LO 29 +#define R_PPC_PLT16_HI 30 +#define R_PPC_PLT16_HA 31 +#define R_PPC_SDAREL16 32 +#define R_PPC_SECTOFF 33 +#define R_PPC_SECTOFF_LO 34 +#define R_PPC_SECTOFF_HI 35 +#define R_PPC_SECTOFF_HA 36 + +/* PowerPC relocations defined for the TLS access ABI. */ +#define R_PPC_TLS 67 /* none (sym+add)@tls */ +#define R_PPC_DTPMOD32 68 /* word32 (sym+add)@dtpmod */ +#define R_PPC_TPREL16 69 /* half16* (sym+add)@tprel */ +#define R_PPC_TPREL16_LO 70 /* half16 (sym+add)@tprel@l */ +#define R_PPC_TPREL16_HI 71 /* half16 (sym+add)@tprel@h */ +#define R_PPC_TPREL16_HA 72 /* half16 (sym+add)@tprel@ha */ +#define R_PPC_TPREL32 73 /* word32 (sym+add)@tprel */ +#define R_PPC_DTPREL16 74 /* half16* (sym+add)@dtprel */ +#define R_PPC_DTPREL16_LO 75 /* half16 (sym+add)@dtprel@l */ +#define R_PPC_DTPREL16_HI 76 /* half16 (sym+add)@dtprel@h */ +#define R_PPC_DTPREL16_HA 77 /* half16 (sym+add)@dtprel@ha */ +#define R_PPC_DTPREL32 78 /* word32 (sym+add)@dtprel */ +#define R_PPC_GOT_TLSGD16 79 /* half16* (sym+add)@got@tlsgd */ +#define R_PPC_GOT_TLSGD16_LO 80 /* half16 (sym+add)@got@tlsgd@l */ +#define R_PPC_GOT_TLSGD16_HI 81 /* half16 (sym+add)@got@tlsgd@h */ +#define R_PPC_GOT_TLSGD16_HA 82 /* half16 (sym+add)@got@tlsgd@ha */ +#define R_PPC_GOT_TLSLD16 83 /* half16* (sym+add)@got@tlsld */ +#define R_PPC_GOT_TLSLD16_LO 84 /* half16 (sym+add)@got@tlsld@l */ +#define R_PPC_GOT_TLSLD16_HI 85 /* half16 (sym+add)@got@tlsld@h */ +#define R_PPC_GOT_TLSLD16_HA 86 /* half16 (sym+add)@got@tlsld@ha */ +#define R_PPC_GOT_TPREL16 87 /* half16* (sym+add)@got@tprel */ +#define R_PPC_GOT_TPREL16_LO 88 /* half16 (sym+add)@got@tprel@l */ +#define R_PPC_GOT_TPREL16_HI 89 /* half16 (sym+add)@got@tprel@h */ +#define R_PPC_GOT_TPREL16_HA 90 /* half16 (sym+add)@got@tprel@ha */ +#define R_PPC_GOT_DTPREL16 91 /* half16* (sym+add)@got@dtprel */ +#define R_PPC_GOT_DTPREL16_LO 92 /* half16* (sym+add)@got@dtprel@l */ +#define R_PPC_GOT_DTPREL16_HI 93 /* half16* (sym+add)@got@dtprel@h */ +#define R_PPC_GOT_DTPREL16_HA 94 /* half16* (sym+add)@got@dtprel@ha */ + +/* keep this the last entry. */ +#define R_PPC_NUM 95 + +/* + * ELF register definitions.. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#define ELF_NGREG 48 /* includes nip, msr, lr, etc. */ +#define ELF_NFPREG 33 /* includes fpscr */ + +typedef unsigned long elf_greg_t64; +typedef elf_greg_t64 elf_gregset_t64[ELF_NGREG]; + +typedef unsigned int elf_greg_t32; +typedef elf_greg_t32 elf_gregset_t32[ELF_NGREG]; +typedef elf_gregset_t32 compat_elf_gregset_t; + +/* + * ELF_ARCH, CLASS, and DATA are used to set parameters in the core dumps. + */ +#ifdef __powerpc64__ +# define ELF_NVRREG32 33 /* includes vscr & vrsave stuffed together */ +# define ELF_NVRREG 34 /* includes vscr & vrsave in split vectors */ +# define ELF_NVSRHALFREG 32 /* Half the vsx registers */ +# define ELF_GREG_TYPE elf_greg_t64 +#else +# define ELF_NEVRREG 34 /* includes acc (as 2) */ +# define ELF_NVRREG 33 /* includes vscr */ +# define ELF_GREG_TYPE elf_greg_t32 +# define ELF_ARCH EM_PPC +# define ELF_CLASS ELFCLASS32 +# define ELF_DATA ELFDATA2MSB +#endif /* __powerpc64__ */ + +#ifndef ELF_ARCH +# define ELF_ARCH EM_PPC64 +# define ELF_CLASS ELFCLASS64 +# define ELF_DATA ELFDATA2MSB + typedef elf_greg_t64 elf_greg_t; + typedef elf_gregset_t64 elf_gregset_t; +#else + /* Assumption: ELF_ARCH == EM_PPC and ELF_CLASS == ELFCLASS32 */ + typedef elf_greg_t32 elf_greg_t; + typedef elf_gregset_t32 elf_gregset_t; +#endif /* ELF_ARCH */ + +/* Floating point registers */ +typedef double elf_fpreg_t; +typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG]; + +/* Altivec registers */ +/* + * The entries with indexes 0-31 contain the corresponding vector registers. + * The entry with index 32 contains the vscr as the last word (offset 12) + * within the quadword. This allows the vscr to be stored as either a + * quadword (since it must be copied via a vector register to/from storage) + * or as a word. + * + * 64-bit kernel notes: The entry at index 33 contains the vrsave as the first + * word (offset 0) within the quadword. + * + * This definition of the VMX state is compatible with the current PPC32 + * ptrace interface. This allows signal handling and ptrace to use the same + * structures. This also simplifies the implementation of a bi-arch + * (combined (32- and 64-bit) gdb. + * + * Note that it's _not_ compatible with 32 bits ucontext which stuffs the + * vrsave along with vscr and so only uses 33 vectors for the register set + */ +typedef __vector128 elf_vrreg_t; +typedef elf_vrreg_t elf_vrregset_t[ELF_NVRREG]; +#ifdef __powerpc64__ +typedef elf_vrreg_t elf_vrregset_t32[ELF_NVRREG32]; +typedef elf_fpreg_t elf_vsrreghalf_t32[ELF_NVSRHALFREG]; +#endif + +#ifdef __KERNEL__ +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch(x) ((x)->e_machine == ELF_ARCH) +#define compat_elf_check_arch(x) ((x)->e_machine == EM_PPC) + +#define USE_ELF_CORE_DUMP +#define CORE_DUMP_USE_REGSET +#define ELF_EXEC_PAGESIZE PAGE_SIZE + +/* This is the location that an ET_DYN program is loaded if exec'ed. Typical + use of this is to invoke "./ld.so someprog" to test out a new version of + the loader. We need to make sure that it is out of the way of the program + that it will "exec", and that there is sufficient room for the brk. */ + +#define ELF_ET_DYN_BASE (0x20000000) + +/* + * Our registers are always unsigned longs, whether we're a 32 bit + * process or 64 bit, on either a 64 bit or 32 bit kernel. + * + * This macro relies on elf_regs[i] having the right type to truncate to, + * either u32 or u64. It defines the body of the elf_core_copy_regs + * function, either the native one with elf_gregset_t elf_regs or + * the 32-bit one with elf_gregset_t32 elf_regs. + */ +#define PPC_ELF_CORE_COPY_REGS(elf_regs, regs) \ + int i, nregs = min(sizeof(*regs) / sizeof(unsigned long), \ + (size_t)ELF_NGREG); \ + for (i = 0; i < nregs; i++) \ + elf_regs[i] = ((unsigned long *) regs)[i]; \ + memset(&elf_regs[i], 0, (ELF_NGREG - i) * sizeof(elf_regs[0])) + +/* Common routine for both 32-bit and 64-bit native processes */ +static inline void ppc_elf_core_copy_regs(elf_gregset_t elf_regs, + struct pt_regs *regs) +{ + PPC_ELF_CORE_COPY_REGS(elf_regs, regs); +} +#define ELF_CORE_COPY_REGS(gregs, regs) ppc_elf_core_copy_regs(gregs, regs); + +typedef elf_vrregset_t elf_fpxregset_t; + +/* ELF_HWCAP yields a mask that user programs can use to figure out what + instruction set this cpu supports. This could be done in userspace, + but it's not easy, and we've already done it here. */ +# define ELF_HWCAP (cur_cpu_spec->cpu_user_features) + +/* This yields a string that ld.so will use to load implementation + specific libraries for optimization. This is more specific in + intent than poking at uname or /proc/cpuinfo. */ + +#define ELF_PLATFORM (cur_cpu_spec->platform) + +/* While ELF_PLATFORM indicates the ISA supported by the platform, it + * may not accurately reflect the underlying behavior of the hardware + * (as in the case of running in Power5+ compatibility mode on a + * Power6 machine). ELF_BASE_PLATFORM allows ld.so to load libraries + * that are tuned for the real hardware. + */ +#define ELF_BASE_PLATFORM (powerpc_base_platform) + +#ifdef __powerpc64__ +# define ELF_PLAT_INIT(_r, load_addr) do { \ + _r->gpr[2] = load_addr; \ +} while (0) +#endif /* __powerpc64__ */ + +#ifdef __powerpc64__ +# define SET_PERSONALITY(ex, ibcs2) \ +do { \ + unsigned long new_flags = 0; \ + if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \ + new_flags = _TIF_32BIT; \ + if ((current_thread_info()->flags & _TIF_32BIT) \ + != new_flags) \ + set_thread_flag(TIF_ABI_PENDING); \ + else \ + clear_thread_flag(TIF_ABI_PENDING); \ + if (personality(current->personality) != PER_LINUX32) \ + set_personality(PER_LINUX | \ + (current->personality & (~PER_MASK))); \ +} while (0) +/* + * An executable for which elf_read_implies_exec() returns TRUE will + * have the READ_IMPLIES_EXEC personality flag set automatically. This + * is only required to work around bugs in old 32bit toolchains. Since + * the 64bit ABI has never had these issues dont enable the workaround + * even if we have an executable stack. + */ +# define elf_read_implies_exec(ex, exec_stk) (test_thread_flag(TIF_32BIT) ? \ + (exec_stk != EXSTACK_DISABLE_X) : 0) +#else +# define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX) +#endif /* __powerpc64__ */ + +extern int dcache_bsize; +extern int icache_bsize; +extern int ucache_bsize; + +/* vDSO has arch_setup_additional_pages */ +#define ARCH_HAS_SETUP_ADDITIONAL_PAGES +struct linux_binprm; +extern int arch_setup_additional_pages(struct linux_binprm *bprm, + int executable_stack); +#define VDSO_AUX_ENT(a,b) NEW_AUX_ENT(a,b); + +#endif /* __KERNEL__ */ + +/* + * The requirements here are: + * - keep the final alignment of sp (sp & 0xf) + * - make sure the 32-bit value at the first 16 byte aligned position of + * AUXV is greater than 16 for glibc compatibility. + * AT_IGNOREPPC is used for that. + * - for compatibility with glibc ARCH_DLINFO must always be defined on PPC, + * even if DLINFO_ARCH_ITEMS goes to zero or is undefined. + * update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes + */ +#define ARCH_DLINFO \ +do { \ + /* Handle glibc compatibility. */ \ + NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC); \ + NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC); \ + /* Cache size items */ \ + NEW_AUX_ENT(AT_DCACHEBSIZE, dcache_bsize); \ + NEW_AUX_ENT(AT_ICACHEBSIZE, icache_bsize); \ + NEW_AUX_ENT(AT_UCACHEBSIZE, ucache_bsize); \ + VDSO_AUX_ENT(AT_SYSINFO_EHDR, current->mm->context.vdso_base) \ +} while (0) + +/* PowerPC64 relocations defined by the ABIs */ +#define R_PPC64_NONE R_PPC_NONE +#define R_PPC64_ADDR32 R_PPC_ADDR32 /* 32bit absolute address. */ +#define R_PPC64_ADDR24 R_PPC_ADDR24 /* 26bit address, word aligned. */ +#define R_PPC64_ADDR16 R_PPC_ADDR16 /* 16bit absolute address. */ +#define R_PPC64_ADDR16_LO R_PPC_ADDR16_LO /* lower 16bits of abs. address. */ +#define R_PPC64_ADDR16_HI R_PPC_ADDR16_HI /* high 16bits of abs. address. */ +#define R_PPC64_ADDR16_HA R_PPC_ADDR16_HA /* adjusted high 16bits. */ +#define R_PPC64_ADDR14 R_PPC_ADDR14 /* 16bit address, word aligned. */ +#define R_PPC64_ADDR14_BRTAKEN R_PPC_ADDR14_BRTAKEN +#define R_PPC64_ADDR14_BRNTAKEN R_PPC_ADDR14_BRNTAKEN +#define R_PPC64_REL24 R_PPC_REL24 /* PC relative 26 bit, word aligned. */ +#define R_PPC64_REL14 R_PPC_REL14 /* PC relative 16 bit. */ +#define R_PPC64_REL14_BRTAKEN R_PPC_REL14_BRTAKEN +#define R_PPC64_REL14_BRNTAKEN R_PPC_REL14_BRNTAKEN +#define R_PPC64_GOT16 R_PPC_GOT16 +#define R_PPC64_GOT16_LO R_PPC_GOT16_LO +#define R_PPC64_GOT16_HI R_PPC_GOT16_HI +#define R_PPC64_GOT16_HA R_PPC_GOT16_HA + +#define R_PPC64_COPY R_PPC_COPY +#define R_PPC64_GLOB_DAT R_PPC_GLOB_DAT +#define R_PPC64_JMP_SLOT R_PPC_JMP_SLOT +#define R_PPC64_RELATIVE R_PPC_RELATIVE + +#define R_PPC64_UADDR32 R_PPC_UADDR32 +#define R_PPC64_UADDR16 R_PPC_UADDR16 +#define R_PPC64_REL32 R_PPC_REL32 +#define R_PPC64_PLT32 R_PPC_PLT32 +#define R_PPC64_PLTREL32 R_PPC_PLTREL32 +#define R_PPC64_PLT16_LO R_PPC_PLT16_LO +#define R_PPC64_PLT16_HI R_PPC_PLT16_HI +#define R_PPC64_PLT16_HA R_PPC_PLT16_HA + +#define R_PPC64_SECTOFF R_PPC_SECTOFF +#define R_PPC64_SECTOFF_LO R_PPC_SECTOFF_LO +#define R_PPC64_SECTOFF_HI R_PPC_SECTOFF_HI +#define R_PPC64_SECTOFF_HA R_PPC_SECTOFF_HA +#define R_PPC64_ADDR30 37 /* word30 (S + A - P) >> 2. */ +#define R_PPC64_ADDR64 38 /* doubleword64 S + A. */ +#define R_PPC64_ADDR16_HIGHER 39 /* half16 #higher(S + A). */ +#define R_PPC64_ADDR16_HIGHERA 40 /* half16 #highera(S + A). */ +#define R_PPC64_ADDR16_HIGHEST 41 /* half16 #highest(S + A). */ +#define R_PPC64_ADDR16_HIGHESTA 42 /* half16 #highesta(S + A). */ +#define R_PPC64_UADDR64 43 /* doubleword64 S + A. */ +#define R_PPC64_REL64 44 /* doubleword64 S + A - P. */ +#define R_PPC64_PLT64 45 /* doubleword64 L + A. */ +#define R_PPC64_PLTREL64 46 /* doubleword64 L + A - P. */ +#define R_PPC64_TOC16 47 /* half16* S + A - .TOC. */ +#define R_PPC64_TOC16_LO 48 /* half16 #lo(S + A - .TOC.). */ +#define R_PPC64_TOC16_HI 49 /* half16 #hi(S + A - .TOC.). */ +#define R_PPC64_TOC16_HA 50 /* half16 #ha(S + A - .TOC.). */ +#define R_PPC64_TOC 51 /* doubleword64 .TOC. */ +#define R_PPC64_PLTGOT16 52 /* half16* M + A. */ +#define R_PPC64_PLTGOT16_LO 53 /* half16 #lo(M + A). */ +#define R_PPC64_PLTGOT16_HI 54 /* half16 #hi(M + A). */ +#define R_PPC64_PLTGOT16_HA 55 /* half16 #ha(M + A). */ + +#define R_PPC64_ADDR16_DS 56 /* half16ds* (S + A) >> 2. */ +#define R_PPC64_ADDR16_LO_DS 57 /* half16ds #lo(S + A) >> 2. */ +#define R_PPC64_GOT16_DS 58 /* half16ds* (G + A) >> 2. */ +#define R_PPC64_GOT16_LO_DS 59 /* half16ds #lo(G + A) >> 2. */ +#define R_PPC64_PLT16_LO_DS 60 /* half16ds #lo(L + A) >> 2. */ +#define R_PPC64_SECTOFF_DS 61 /* half16ds* (R + A) >> 2. */ +#define R_PPC64_SECTOFF_LO_DS 62 /* half16ds #lo(R + A) >> 2. */ +#define R_PPC64_TOC16_DS 63 /* half16ds* (S + A - .TOC.) >> 2. */ +#define R_PPC64_TOC16_LO_DS 64 /* half16ds #lo(S + A - .TOC.) >> 2. */ +#define R_PPC64_PLTGOT16_DS 65 /* half16ds* (M + A) >> 2. */ +#define R_PPC64_PLTGOT16_LO_DS 66 /* half16ds #lo(M + A) >> 2. */ + +/* PowerPC64 relocations defined for the TLS access ABI. */ +#define R_PPC64_TLS 67 /* none (sym+add)@tls */ +#define R_PPC64_DTPMOD64 68 /* doubleword64 (sym+add)@dtpmod */ +#define R_PPC64_TPREL16 69 /* half16* (sym+add)@tprel */ +#define R_PPC64_TPREL16_LO 70 /* half16 (sym+add)@tprel@l */ +#define R_PPC64_TPREL16_HI 71 /* half16 (sym+add)@tprel@h */ +#define R_PPC64_TPREL16_HA 72 /* half16 (sym+add)@tprel@ha */ +#define R_PPC64_TPREL64 73 /* doubleword64 (sym+add)@tprel */ +#define R_PPC64_DTPREL16 74 /* half16* (sym+add)@dtprel */ +#define R_PPC64_DTPREL16_LO 75 /* half16 (sym+add)@dtprel@l */ +#define R_PPC64_DTPREL16_HI 76 /* half16 (sym+add)@dtprel@h */ +#define R_PPC64_DTPREL16_HA 77 /* half16 (sym+add)@dtprel@ha */ +#define R_PPC64_DTPREL64 78 /* doubleword64 (sym+add)@dtprel */ +#define R_PPC64_GOT_TLSGD16 79 /* half16* (sym+add)@got@tlsgd */ +#define R_PPC64_GOT_TLSGD16_LO 80 /* half16 (sym+add)@got@tlsgd@l */ +#define R_PPC64_GOT_TLSGD16_HI 81 /* half16 (sym+add)@got@tlsgd@h */ +#define R_PPC64_GOT_TLSGD16_HA 82 /* half16 (sym+add)@got@tlsgd@ha */ +#define R_PPC64_GOT_TLSLD16 83 /* half16* (sym+add)@got@tlsld */ +#define R_PPC64_GOT_TLSLD16_LO 84 /* half16 (sym+add)@got@tlsld@l */ +#define R_PPC64_GOT_TLSLD16_HI 85 /* half16 (sym+add)@got@tlsld@h */ +#define R_PPC64_GOT_TLSLD16_HA 86 /* half16 (sym+add)@got@tlsld@ha */ +#define R_PPC64_GOT_TPREL16_DS 87 /* half16ds* (sym+add)@got@tprel */ +#define R_PPC64_GOT_TPREL16_LO_DS 88 /* half16ds (sym+add)@got@tprel@l */ +#define R_PPC64_GOT_TPREL16_HI 89 /* half16 (sym+add)@got@tprel@h */ +#define R_PPC64_GOT_TPREL16_HA 90 /* half16 (sym+add)@got@tprel@ha */ +#define R_PPC64_GOT_DTPREL16_DS 91 /* half16ds* (sym+add)@got@dtprel */ +#define R_PPC64_GOT_DTPREL16_LO_DS 92 /* half16ds (sym+add)@got@dtprel@l */ +#define R_PPC64_GOT_DTPREL16_HI 93 /* half16 (sym+add)@got@dtprel@h */ +#define R_PPC64_GOT_DTPREL16_HA 94 /* half16 (sym+add)@got@dtprel@ha */ +#define R_PPC64_TPREL16_DS 95 /* half16ds* (sym+add)@tprel */ +#define R_PPC64_TPREL16_LO_DS 96 /* half16ds (sym+add)@tprel@l */ +#define R_PPC64_TPREL16_HIGHER 97 /* half16 (sym+add)@tprel@higher */ +#define R_PPC64_TPREL16_HIGHERA 98 /* half16 (sym+add)@tprel@highera */ +#define R_PPC64_TPREL16_HIGHEST 99 /* half16 (sym+add)@tprel@highest */ +#define R_PPC64_TPREL16_HIGHESTA 100 /* half16 (sym+add)@tprel@highesta */ +#define R_PPC64_DTPREL16_DS 101 /* half16ds* (sym+add)@dtprel */ +#define R_PPC64_DTPREL16_LO_DS 102 /* half16ds (sym+add)@dtprel@l */ +#define R_PPC64_DTPREL16_HIGHER 103 /* half16 (sym+add)@dtprel@higher */ +#define R_PPC64_DTPREL16_HIGHERA 104 /* half16 (sym+add)@dtprel@highera */ +#define R_PPC64_DTPREL16_HIGHEST 105 /* half16 (sym+add)@dtprel@highest */ +#define R_PPC64_DTPREL16_HIGHESTA 106 /* half16 (sym+add)@dtprel@highesta */ + +/* Keep this the last entry. */ +#define R_PPC64_NUM 107 + +#ifdef __KERNEL__ + +#ifdef CONFIG_SPU_BASE +/* Notes used in ET_CORE. Note name is "SPU//". */ +#define NT_SPU 1 + +#define ARCH_HAVE_EXTRA_ELF_NOTES + +#endif /* CONFIG_SPU_BASE */ + +#endif /* __KERNEL */ + +#endif /* _ASM_POWERPC_ELF_H */ diff --git a/arch/powerpc/include/asm/emergency-restart.h b/arch/powerpc/include/asm/emergency-restart.h new file mode 100644 index 00000000000..3711bd9d50b --- /dev/null +++ b/arch/powerpc/include/asm/emergency-restart.h @@ -0,0 +1 @@ +#include diff --git a/arch/powerpc/include/asm/errno.h b/arch/powerpc/include/asm/errno.h new file mode 100644 index 00000000000..8c145fd17d8 --- /dev/null +++ b/arch/powerpc/include/asm/errno.h @@ -0,0 +1,11 @@ +#ifndef _ASM_POWERPC_ERRNO_H +#define _ASM_POWERPC_ERRNO_H + +#include + +#undef EDEADLOCK +#define EDEADLOCK 58 /* File locking deadlock error */ + +#define _LAST_ERRNO 516 + +#endif /* _ASM_POWERPC_ERRNO_H */ diff --git a/arch/powerpc/include/asm/exception.h b/arch/powerpc/include/asm/exception.h new file mode 100644 index 00000000000..329148b5acc --- /dev/null +++ b/arch/powerpc/include/asm/exception.h @@ -0,0 +1,311 @@ +#ifndef _ASM_POWERPC_EXCEPTION_H +#define _ASM_POWERPC_EXCEPTION_H +/* + * Extracted from head_64.S + * + * PowerPC version + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * + * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP + * Copyright (C) 1996 Cort Dougan + * Adapted for Power Macintosh by Paul Mackerras. + * Low-level exception handlers and MMU support + * rewritten by Paul Mackerras. + * Copyright (C) 1996 Paul Mackerras. + * + * Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and + * Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com + * + * This file contains the low-level support and setup for the + * PowerPC-64 platform, including trap and interrupt dispatch. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +/* + * The following macros define the code that appears as + * the prologue to each of the exception handlers. They + * are split into two parts to allow a single kernel binary + * to be used for pSeries and iSeries. + * + * We make as much of the exception code common between native + * exception handlers (including pSeries LPAR) and iSeries LPAR + * implementations as possible. + */ + +#define EX_R9 0 +#define EX_R10 8 +#define EX_R11 16 +#define EX_R12 24 +#define EX_R13 32 +#define EX_SRR0 40 +#define EX_DAR 48 +#define EX_DSISR 56 +#define EX_CCR 60 +#define EX_R3 64 +#define EX_LR 72 + +/* + * We're short on space and time in the exception prolog, so we can't + * use the normal SET_REG_IMMEDIATE macro. Normally we just need the + * low halfword of the address, but for Kdump we need the whole low + * word. + */ +#ifdef CONFIG_CRASH_DUMP +#define LOAD_HANDLER(reg, label) \ + oris reg,reg,(label)@h; /* virt addr of handler ... */ \ + ori reg,reg,(label)@l; /* .. and the rest */ +#else +#define LOAD_HANDLER(reg, label) \ + ori reg,reg,(label)@l; /* virt addr of handler ... */ +#endif + +#define EXCEPTION_PROLOG_1(area) \ + mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ + std r9,area+EX_R9(r13); /* save r9 - r12 */ \ + std r10,area+EX_R10(r13); \ + std r11,area+EX_R11(r13); \ + std r12,area+EX_R12(r13); \ + mfspr r9,SPRN_SPRG1; \ + std r9,area+EX_R13(r13); \ + mfcr r9 + +/* + * Equal to EXCEPTION_PROLOG_PSERIES, except that it forces 64bit mode. + * The firmware calls the registered system_reset_fwnmi and + * machine_check_fwnmi handlers in 32bit mode if the cpu happens to run + * a 32bit application at the time of the event. + * This firmware bug is present on POWER4 and JS20. + */ +#define EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(area, label) \ + EXCEPTION_PROLOG_1(area); \ + clrrdi r12,r13,32; /* get high part of &label */ \ + mfmsr r10; \ + /* force 64bit mode */ \ + li r11,5; /* MSR_SF_LG|MSR_ISF_LG */ \ + rldimi r10,r11,61,0; /* insert into top 3 bits */ \ + /* done 64bit mode */ \ + mfspr r11,SPRN_SRR0; /* save SRR0 */ \ + LOAD_HANDLER(r12,label) \ + ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \ + mtspr SPRN_SRR0,r12; \ + mfspr r12,SPRN_SRR1; /* and SRR1 */ \ + mtspr SPRN_SRR1,r10; \ + rfid; \ + b . /* prevent speculative execution */ + +#define EXCEPTION_PROLOG_PSERIES(area, label) \ + EXCEPTION_PROLOG_1(area); \ + clrrdi r12,r13,32; /* get high part of &label */ \ + mfmsr r10; \ + mfspr r11,SPRN_SRR0; /* save SRR0 */ \ + LOAD_HANDLER(r12,label) \ + ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \ + mtspr SPRN_SRR0,r12; \ + mfspr r12,SPRN_SRR1; /* and SRR1 */ \ + mtspr SPRN_SRR1,r10; \ + rfid; \ + b . /* prevent speculative execution */ + +/* + * The common exception prolog is used for all except a few exceptions + * such as a segment miss on a kernel address. We have to be prepared + * to take another exception from the point where we first touch the + * kernel stack onwards. + * + * On entry r13 points to the paca, r9-r13 are saved in the paca, + * r9 contains the saved CR, r11 and r12 contain the saved SRR0 and + * SRR1, and relocation is on. + */ +#define EXCEPTION_PROLOG_COMMON(n, area) \ + andi. r10,r12,MSR_PR; /* See if coming from user */ \ + mr r10,r1; /* Save r1 */ \ + subi r1,r1,INT_FRAME_SIZE; /* alloc frame on kernel stack */ \ + beq- 1f; \ + ld r1,PACAKSAVE(r13); /* kernel stack to use */ \ +1: cmpdi cr1,r1,0; /* check if r1 is in userspace */ \ + bge- cr1,2f; /* abort if it is */ \ + b 3f; \ +2: li r1,(n); /* will be reloaded later */ \ + sth r1,PACA_TRAP_SAVE(r13); \ + b bad_stack; \ +3: std r9,_CCR(r1); /* save CR in stackframe */ \ + std r11,_NIP(r1); /* save SRR0 in stackframe */ \ + std r12,_MSR(r1); /* save SRR1 in stackframe */ \ + std r10,0(r1); /* make stack chain pointer */ \ + std r0,GPR0(r1); /* save r0 in stackframe */ \ + std r10,GPR1(r1); /* save r1 in stackframe */ \ + ACCOUNT_CPU_USER_ENTRY(r9, r10); \ + std r2,GPR2(r1); /* save r2 in stackframe */ \ + SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \ + SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \ + ld r9,area+EX_R9(r13); /* move r9, r10 to stackframe */ \ + ld r10,area+EX_R10(r13); \ + std r9,GPR9(r1); \ + std r10,GPR10(r1); \ + ld r9,area+EX_R11(r13); /* move r11 - r13 to stackframe */ \ + ld r10,area+EX_R12(r13); \ + ld r11,area+EX_R13(r13); \ + std r9,GPR11(r1); \ + std r10,GPR12(r1); \ + std r11,GPR13(r1); \ + ld r2,PACATOC(r13); /* get kernel TOC into r2 */ \ + mflr r9; /* save LR in stackframe */ \ + std r9,_LINK(r1); \ + mfctr r10; /* save CTR in stackframe */ \ + std r10,_CTR(r1); \ + lbz r10,PACASOFTIRQEN(r13); \ + mfspr r11,SPRN_XER; /* save XER in stackframe */ \ + std r10,SOFTE(r1); \ + std r11,_XER(r1); \ + li r9,(n)+1; \ + std r9,_TRAP(r1); /* set trap number */ \ + li r10,0; \ + ld r11,exception_marker@toc(r2); \ + std r10,RESULT(r1); /* clear regs->result */ \ + std r11,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */ + +/* + * Exception vectors. + */ +#define STD_EXCEPTION_PSERIES(n, label) \ + . = n; \ + .globl label##_pSeries; \ +label##_pSeries: \ + HMT_MEDIUM; \ + mtspr SPRN_SPRG1,r13; /* save r13 */ \ + EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common) + +#define HSTD_EXCEPTION_PSERIES(n, label) \ + . = n; \ + .globl label##_pSeries; \ +label##_pSeries: \ + HMT_MEDIUM; \ + mtspr SPRN_SPRG1,r20; /* save r20 */ \ + mfspr r20,SPRN_HSRR0; /* copy HSRR0 to SRR0 */ \ + mtspr SPRN_SRR0,r20; \ + mfspr r20,SPRN_HSRR1; /* copy HSRR0 to SRR0 */ \ + mtspr SPRN_SRR1,r20; \ + mfspr r20,SPRN_SPRG1; /* restore r20 */ \ + mtspr SPRN_SPRG1,r13; /* save r13 */ \ + EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common) + + +#define MASKABLE_EXCEPTION_PSERIES(n, label) \ + . = n; \ + .globl label##_pSeries; \ +label##_pSeries: \ + HMT_MEDIUM; \ + mtspr SPRN_SPRG1,r13; /* save r13 */ \ + mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ + std r9,PACA_EXGEN+EX_R9(r13); /* save r9, r10 */ \ + std r10,PACA_EXGEN+EX_R10(r13); \ + lbz r10,PACASOFTIRQEN(r13); \ + mfcr r9; \ + cmpwi r10,0; \ + beq masked_interrupt; \ + mfspr r10,SPRN_SPRG1; \ + std r10,PACA_EXGEN+EX_R13(r13); \ + std r11,PACA_EXGEN+EX_R11(r13); \ + std r12,PACA_EXGEN+EX_R12(r13); \ + clrrdi r12,r13,32; /* get high part of &label */ \ + mfmsr r10; \ + mfspr r11,SPRN_SRR0; /* save SRR0 */ \ + LOAD_HANDLER(r12,label##_common) \ + ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \ + mtspr SPRN_SRR0,r12; \ + mfspr r12,SPRN_SRR1; /* and SRR1 */ \ + mtspr SPRN_SRR1,r10; \ + rfid; \ + b . /* prevent speculative execution */ + +#ifdef CONFIG_PPC_ISERIES +#define DISABLE_INTS \ + li r11,0; \ + stb r11,PACASOFTIRQEN(r13); \ +BEGIN_FW_FTR_SECTION; \ + stb r11,PACAHARDIRQEN(r13); \ +END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES); \ + TRACE_DISABLE_INTS; \ +BEGIN_FW_FTR_SECTION; \ + mfmsr r10; \ + ori r10,r10,MSR_EE; \ + mtmsrd r10,1; \ +END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) +#else +#define DISABLE_INTS \ + li r11,0; \ + stb r11,PACASOFTIRQEN(r13); \ + stb r11,PACAHARDIRQEN(r13); \ + TRACE_DISABLE_INTS +#endif /* CONFIG_PPC_ISERIES */ + +#define ENABLE_INTS \ + ld r12,_MSR(r1); \ + mfmsr r11; \ + rlwimi r11,r12,0,MSR_EE; \ + mtmsrd r11,1 + +#define STD_EXCEPTION_COMMON(trap, label, hdlr) \ + .align 7; \ + .globl label##_common; \ +label##_common: \ + EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ + DISABLE_INTS; \ + bl .save_nvgprs; \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + bl hdlr; \ + b .ret_from_except + +/* + * Like STD_EXCEPTION_COMMON, but for exceptions that can occur + * in the idle task and therefore need the special idle handling. + */ +#define STD_EXCEPTION_COMMON_IDLE(trap, label, hdlr) \ + .align 7; \ + .globl label##_common; \ +label##_common: \ + EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ + FINISH_NAP; \ + DISABLE_INTS; \ + bl .save_nvgprs; \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + bl hdlr; \ + b .ret_from_except + +#define STD_EXCEPTION_COMMON_LITE(trap, label, hdlr) \ + .align 7; \ + .globl label##_common; \ +label##_common: \ + EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ + FINISH_NAP; \ + DISABLE_INTS; \ +BEGIN_FTR_SECTION \ + bl .ppc64_runlatch_on; \ +END_FTR_SECTION_IFSET(CPU_FTR_CTRL) \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + bl hdlr; \ + b .ret_from_except_lite + +/* + * When the idle code in power4_idle puts the CPU into NAP mode, + * it has to do so in a loop, and relies on the external interrupt + * and decrementer interrupt entry code to get it out of the loop. + * It sets the _TLF_NAPPING bit in current_thread_info()->local_flags + * to signal that it is in the loop and needs help to get out. + */ +#ifdef CONFIG_PPC_970_NAP +#define FINISH_NAP \ +BEGIN_FTR_SECTION \ + clrrdi r11,r1,THREAD_SHIFT; \ + ld r9,TI_LOCAL_FLAGS(r11); \ + andi. r10,r9,_TLF_NAPPING; \ + bnel power4_fixup_nap; \ +END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) +#else +#define FINISH_NAP +#endif + +#endif /* _ASM_POWERPC_EXCEPTION_H */ diff --git a/arch/powerpc/include/asm/fb.h b/arch/powerpc/include/asm/fb.h new file mode 100644 index 00000000000..411af8d17a6 --- /dev/null +++ b/arch/powerpc/include/asm/fb.h @@ -0,0 +1,21 @@ +#ifndef _ASM_FB_H_ +#define _ASM_FB_H_ + +#include +#include +#include + +static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma, + unsigned long off) +{ + vma->vm_page_prot = phys_mem_access_prot(file, off >> PAGE_SHIFT, + vma->vm_end - vma->vm_start, + vma->vm_page_prot); +} + +static inline int fb_is_primary_device(struct fb_info *info) +{ + return 0; +} + +#endif /* _ASM_FB_H_ */ diff --git a/arch/powerpc/include/asm/fcntl.h b/arch/powerpc/include/asm/fcntl.h new file mode 100644 index 00000000000..ce5c4516d40 --- /dev/null +++ b/arch/powerpc/include/asm/fcntl.h @@ -0,0 +1,11 @@ +#ifndef _ASM_FCNTL_H +#define _ASM_FCNTL_H + +#define O_DIRECTORY 040000 /* must be a directory */ +#define O_NOFOLLOW 0100000 /* don't follow links */ +#define O_LARGEFILE 0200000 +#define O_DIRECT 0400000 /* direct disk access hint */ + +#include + +#endif /* _ASM_FCNTL_H */ diff --git a/arch/powerpc/include/asm/feature-fixups.h b/arch/powerpc/include/asm/feature-fixups.h new file mode 100644 index 00000000000..a1029967620 --- /dev/null +++ b/arch/powerpc/include/asm/feature-fixups.h @@ -0,0 +1,126 @@ +#ifndef __ASM_POWERPC_FEATURE_FIXUPS_H +#define __ASM_POWERPC_FEATURE_FIXUPS_H + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifdef __ASSEMBLY__ + +/* + * Feature section common macros + * + * Note that the entries now contain offsets between the table entry + * and the code rather than absolute code pointers in order to be + * useable with the vdso shared library. There is also an assumption + * that values will be negative, that is, the fixup table has to be + * located after the code it fixes up. + */ +#if defined(CONFIG_PPC64) && !defined(__powerpc64__) +/* 64 bits kernel, 32 bits code (ie. vdso32) */ +#define FTR_ENTRY_LONG .llong +#define FTR_ENTRY_OFFSET .long 0xffffffff; .long +#else +/* 64 bit kernel 64 bit code, or 32 bit kernel 32 bit code */ +#define FTR_ENTRY_LONG PPC_LONG +#define FTR_ENTRY_OFFSET PPC_LONG +#endif + +#define START_FTR_SECTION(label) label##1: + +#define FTR_SECTION_ELSE_NESTED(label) \ +label##2: \ + .pushsection __ftr_alt_##label,"a"; \ + .align 2; \ +label##3: + +#define MAKE_FTR_SECTION_ENTRY(msk, val, label, sect) \ +label##4: \ + .popsection; \ + .pushsection sect,"a"; \ + .align 3; \ +label##5: \ + FTR_ENTRY_LONG msk; \ + FTR_ENTRY_LONG val; \ + FTR_ENTRY_OFFSET label##1b-label##5b; \ + FTR_ENTRY_OFFSET label##2b-label##5b; \ + FTR_ENTRY_OFFSET label##3b-label##5b; \ + FTR_ENTRY_OFFSET label##4b-label##5b; \ + .popsection; + + +/* CPU feature dependent sections */ +#define BEGIN_FTR_SECTION_NESTED(label) START_FTR_SECTION(label) +#define BEGIN_FTR_SECTION START_FTR_SECTION(97) + +#define END_FTR_SECTION_NESTED(msk, val, label) \ + FTR_SECTION_ELSE_NESTED(label) \ + MAKE_FTR_SECTION_ENTRY(msk, val, label, __ftr_fixup) + +#define END_FTR_SECTION(msk, val) \ + END_FTR_SECTION_NESTED(msk, val, 97) + +#define END_FTR_SECTION_IFSET(msk) END_FTR_SECTION((msk), (msk)) +#define END_FTR_SECTION_IFCLR(msk) END_FTR_SECTION((msk), 0) + +/* CPU feature sections with alternatives, use BEGIN_FTR_SECTION to start */ +#define FTR_SECTION_ELSE FTR_SECTION_ELSE_NESTED(97) +#define ALT_FTR_SECTION_END_NESTED(msk, val, label) \ + MAKE_FTR_SECTION_ENTRY(msk, val, label, __ftr_fixup) +#define ALT_FTR_SECTION_END_NESTED_IFSET(msk, label) \ + ALT_FTR_SECTION_END_NESTED(msk, msk, label) +#define ALT_FTR_SECTION_END_NESTED_IFCLR(msk, label) \ + ALT_FTR_SECTION_END_NESTED(msk, 0, label) +#define ALT_FTR_SECTION_END(msk, val) \ + ALT_FTR_SECTION_END_NESTED(msk, val, 97) +#define ALT_FTR_SECTION_END_IFSET(msk) \ + ALT_FTR_SECTION_END_NESTED_IFSET(msk, 97) +#define ALT_FTR_SECTION_END_IFCLR(msk) \ + ALT_FTR_SECTION_END_NESTED_IFCLR(msk, 97) + +/* Firmware feature dependent sections */ +#define BEGIN_FW_FTR_SECTION_NESTED(label) START_FTR_SECTION(label) +#define BEGIN_FW_FTR_SECTION START_FTR_SECTION(97) + +#define END_FW_FTR_SECTION_NESTED(msk, val, label) \ + FTR_SECTION_ELSE_NESTED(label) \ + MAKE_FTR_SECTION_ENTRY(msk, val, label, __fw_ftr_fixup) + +#define END_FW_FTR_SECTION(msk, val) \ + END_FW_FTR_SECTION_NESTED(msk, val, 97) + +#define END_FW_FTR_SECTION_IFSET(msk) END_FW_FTR_SECTION((msk), (msk)) +#define END_FW_FTR_SECTION_IFCLR(msk) END_FW_FTR_SECTION((msk), 0) + +/* Firmware feature sections with alternatives */ +#define FW_FTR_SECTION_ELSE_NESTED(label) FTR_SECTION_ELSE_NESTED(label) +#define FW_FTR_SECTION_ELSE FTR_SECTION_ELSE_NESTED(97) +#define ALT_FW_FTR_SECTION_END_NESTED(msk, val, label) \ + MAKE_FTR_SECTION_ENTRY(msk, val, label, __fw_ftr_fixup) +#define ALT_FW_FTR_SECTION_END_NESTED_IFSET(msk, label) \ + ALT_FW_FTR_SECTION_END_NESTED(msk, msk, label) +#define ALT_FW_FTR_SECTION_END_NESTED_IFCLR(msk, label) \ + ALT_FW_FTR_SECTION_END_NESTED(msk, 0, label) +#define ALT_FW_FTR_SECTION_END(msk, val) \ + ALT_FW_FTR_SECTION_END_NESTED(msk, val, 97) +#define ALT_FW_FTR_SECTION_END_IFSET(msk) \ + ALT_FW_FTR_SECTION_END_NESTED_IFSET(msk, 97) +#define ALT_FW_FTR_SECTION_END_IFCLR(msk) \ + ALT_FW_FTR_SECTION_END_NESTED_IFCLR(msk, 97) + +#endif /* __ASSEMBLY__ */ + +/* LWSYNC feature sections */ +#define START_LWSYNC_SECTION(label) label##1: +#define MAKE_LWSYNC_SECTION_ENTRY(label, sect) \ +label##2: \ + .pushsection sect,"a"; \ + .align 2; \ +label##3: \ + .long label##1b-label##3b; \ + .popsection; + +#endif /* __ASM_POWERPC_FEATURE_FIXUPS_H */ diff --git a/arch/powerpc/include/asm/firmware.h b/arch/powerpc/include/asm/firmware.h new file mode 100644 index 00000000000..3a179827528 --- /dev/null +++ b/arch/powerpc/include/asm/firmware.h @@ -0,0 +1,132 @@ +/* + * Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org) + * + * Modifications for ppc64: + * Copyright (C) 2003 Dave Engebretsen + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef __ASM_POWERPC_FIRMWARE_H +#define __ASM_POWERPC_FIRMWARE_H + +#ifdef __KERNEL__ + +#include +#include + +/* firmware feature bitmask values */ +#define FIRMWARE_MAX_FEATURES 63 + +#define FW_FEATURE_PFT ASM_CONST(0x0000000000000001) +#define FW_FEATURE_TCE ASM_CONST(0x0000000000000002) +#define FW_FEATURE_SPRG0 ASM_CONST(0x0000000000000004) +#define FW_FEATURE_DABR ASM_CONST(0x0000000000000008) +#define FW_FEATURE_COPY ASM_CONST(0x0000000000000010) +#define FW_FEATURE_ASR ASM_CONST(0x0000000000000020) +#define FW_FEATURE_DEBUG ASM_CONST(0x0000000000000040) +#define FW_FEATURE_TERM ASM_CONST(0x0000000000000080) +#define FW_FEATURE_PERF ASM_CONST(0x0000000000000100) +#define FW_FEATURE_DUMP ASM_CONST(0x0000000000000200) +#define FW_FEATURE_INTERRUPT ASM_CONST(0x0000000000000400) +#define FW_FEATURE_MIGRATE ASM_CONST(0x0000000000000800) +#define FW_FEATURE_PERFMON ASM_CONST(0x0000000000001000) +#define FW_FEATURE_CRQ ASM_CONST(0x0000000000002000) +#define FW_FEATURE_VIO ASM_CONST(0x0000000000004000) +#define FW_FEATURE_RDMA ASM_CONST(0x0000000000008000) +#define FW_FEATURE_LLAN ASM_CONST(0x0000000000010000) +#define FW_FEATURE_BULK ASM_CONST(0x0000000000020000) +#define FW_FEATURE_XDABR ASM_CONST(0x0000000000040000) +#define FW_FEATURE_MULTITCE ASM_CONST(0x0000000000080000) +#define FW_FEATURE_SPLPAR ASM_CONST(0x0000000000100000) +#define FW_FEATURE_ISERIES ASM_CONST(0x0000000000200000) +#define FW_FEATURE_LPAR ASM_CONST(0x0000000000400000) +#define FW_FEATURE_PS3_LV1 ASM_CONST(0x0000000000800000) +#define FW_FEATURE_BEAT ASM_CONST(0x0000000001000000) +#define FW_FEATURE_BULK_REMOVE ASM_CONST(0x0000000002000000) +#define FW_FEATURE_CMO ASM_CONST(0x0000000004000000) + +#ifndef __ASSEMBLY__ + +enum { +#ifdef CONFIG_PPC64 + FW_FEATURE_PSERIES_POSSIBLE = FW_FEATURE_PFT | FW_FEATURE_TCE | + FW_FEATURE_SPRG0 | FW_FEATURE_DABR | FW_FEATURE_COPY | + FW_FEATURE_ASR | FW_FEATURE_DEBUG | FW_FEATURE_TERM | + FW_FEATURE_PERF | FW_FEATURE_DUMP | FW_FEATURE_INTERRUPT | + FW_FEATURE_MIGRATE | FW_FEATURE_PERFMON | FW_FEATURE_CRQ | + FW_FEATURE_VIO | FW_FEATURE_RDMA | FW_FEATURE_LLAN | + FW_FEATURE_BULK | FW_FEATURE_XDABR | FW_FEATURE_MULTITCE | + FW_FEATURE_SPLPAR | FW_FEATURE_LPAR | FW_FEATURE_CMO, + FW_FEATURE_PSERIES_ALWAYS = 0, + FW_FEATURE_ISERIES_POSSIBLE = FW_FEATURE_ISERIES | FW_FEATURE_LPAR, + FW_FEATURE_ISERIES_ALWAYS = FW_FEATURE_ISERIES | FW_FEATURE_LPAR, + FW_FEATURE_PS3_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1, + FW_FEATURE_PS3_ALWAYS = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1, + FW_FEATURE_CELLEB_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_BEAT, + FW_FEATURE_CELLEB_ALWAYS = 0, + FW_FEATURE_NATIVE_POSSIBLE = 0, + FW_FEATURE_NATIVE_ALWAYS = 0, + FW_FEATURE_POSSIBLE = +#ifdef CONFIG_PPC_PSERIES + FW_FEATURE_PSERIES_POSSIBLE | +#endif +#ifdef CONFIG_PPC_ISERIES + FW_FEATURE_ISERIES_POSSIBLE | +#endif +#ifdef CONFIG_PPC_PS3 + FW_FEATURE_PS3_POSSIBLE | +#endif +#ifdef CONFIG_PPC_CELLEB + FW_FEATURE_CELLEB_POSSIBLE | +#endif +#ifdef CONFIG_PPC_NATIVE + FW_FEATURE_NATIVE_ALWAYS | +#endif + 0, + FW_FEATURE_ALWAYS = +#ifdef CONFIG_PPC_PSERIES + FW_FEATURE_PSERIES_ALWAYS & +#endif +#ifdef CONFIG_PPC_ISERIES + FW_FEATURE_ISERIES_ALWAYS & +#endif +#ifdef CONFIG_PPC_PS3 + FW_FEATURE_PS3_ALWAYS & +#endif +#ifdef CONFIG_PPC_CELLEB + FW_FEATURE_CELLEB_ALWAYS & +#endif +#ifdef CONFIG_PPC_NATIVE + FW_FEATURE_NATIVE_ALWAYS & +#endif + FW_FEATURE_POSSIBLE, + +#else /* CONFIG_PPC64 */ + FW_FEATURE_POSSIBLE = 0, + FW_FEATURE_ALWAYS = 0, +#endif +}; + +/* This is used to identify firmware features which are available + * to the kernel. + */ +extern unsigned long powerpc_firmware_features; + +#define firmware_has_feature(feature) \ + ((FW_FEATURE_ALWAYS & (feature)) || \ + (FW_FEATURE_POSSIBLE & powerpc_firmware_features & (feature))) + +extern void system_reset_fwnmi(void); +extern void machine_check_fwnmi(void); + +/* This is true if we are using the firmware NMI handler (typically LPAR) */ +extern int fwnmi_active; + +extern unsigned int __start___fw_ftr_fixup, __stop___fw_ftr_fixup; + +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ +#endif /* __ASM_POWERPC_FIRMWARE_H */ diff --git a/arch/powerpc/include/asm/fixmap.h b/arch/powerpc/include/asm/fixmap.h new file mode 100644 index 00000000000..8428b38a3d3 --- /dev/null +++ b/arch/powerpc/include/asm/fixmap.h @@ -0,0 +1,106 @@ +/* + * fixmap.h: compile-time virtual memory allocation + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998 Ingo Molnar + * + * Copyright 2008 Freescale Semiconductor Inc. + * Port to powerpc added by Kumar Gala + */ + +#ifndef _ASM_FIXMAP_H +#define _ASM_FIXMAP_H + +extern unsigned long FIXADDR_TOP; + +#ifndef __ASSEMBLY__ +#include +#include +#ifdef CONFIG_HIGHMEM +#include +#include +#endif + +/* + * Here we define all the compile-time 'special' virtual + * addresses. The point is to have a constant address at + * compile time, but to set the physical address only + * in the boot process. We allocate these special addresses + * from the end of virtual memory (0xfffff000) backwards. + * Also this lets us do fail-safe vmalloc(), we + * can guarantee that these special addresses and + * vmalloc()-ed addresses never overlap. + * + * these 'compile-time allocated' memory buffers are + * fixed-size 4k pages. (or larger if used with an increment + * highger than 1) use fixmap_set(idx,phys) to associate + * physical memory with fixmap indices. + * + * TLB entries of such buffers will not be flushed across + * task switches. + */ +enum fixed_addresses { + FIX_HOLE, +#ifdef CONFIG_HIGHMEM + FIX_KMAP_BEGIN, /* reserved pte's for temporary kernel mappings */ + FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1, +#endif + /* FIX_PCIE_MCFG, */ + __end_of_fixed_addresses +}; + +extern void __set_fixmap (enum fixed_addresses idx, + phys_addr_t phys, pgprot_t flags); + +#define set_fixmap(idx, phys) \ + __set_fixmap(idx, phys, PAGE_KERNEL) +/* + * Some hardware wants to get fixmapped without caching. + */ +#define set_fixmap_nocache(idx, phys) \ + __set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE) + +#define clear_fixmap(idx) \ + __set_fixmap(idx, 0, __pgprot(0)) + +#define __FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT) +#define FIXADDR_START (FIXADDR_TOP - __FIXADDR_SIZE) + +#define __fix_to_virt(x) (FIXADDR_TOP - ((x) << PAGE_SHIFT)) +#define __virt_to_fix(x) ((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT) + +extern void __this_fixmap_does_not_exist(void); + +/* + * 'index to address' translation. If anyone tries to use the idx + * directly without tranlation, we catch the bug with a NULL-deference + * kernel oops. Illegal ranges of incoming indices are caught too. + */ +static __always_inline unsigned long fix_to_virt(const unsigned int idx) +{ + /* + * this branch gets completely eliminated after inlining, + * except when someone tries to use fixaddr indices in an + * illegal way. (such as mixing up address types or using + * out-of-range indices). + * + * If it doesn't get removed, the linker will complain + * loudly with a reasonably clear error message.. + */ + if (idx >= __end_of_fixed_addresses) + __this_fixmap_does_not_exist(); + + return __fix_to_virt(idx); +} + +static inline unsigned long virt_to_fix(const unsigned long vaddr) +{ + BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START); + return __virt_to_fix(vaddr); +} + +#endif /* !__ASSEMBLY__ */ +#endif diff --git a/arch/powerpc/include/asm/floppy.h b/arch/powerpc/include/asm/floppy.h new file mode 100644 index 00000000000..24bd34c57e9 --- /dev/null +++ b/arch/powerpc/include/asm/floppy.h @@ -0,0 +1,213 @@ +/* + * Architecture specific parts of the Floppy driver + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995 + */ +#ifndef __ASM_POWERPC_FLOPPY_H +#define __ASM_POWERPC_FLOPPY_H +#ifdef __KERNEL__ + +#include + +#define fd_inb(port) inb_p(port) +#define fd_outb(value,port) outb_p(value,port) + +#define fd_enable_dma() enable_dma(FLOPPY_DMA) +#define fd_disable_dma() fd_ops->_disable_dma(FLOPPY_DMA) +#define fd_free_dma() fd_ops->_free_dma(FLOPPY_DMA) +#define fd_clear_dma_ff() clear_dma_ff(FLOPPY_DMA) +#define fd_set_dma_mode(mode) set_dma_mode(FLOPPY_DMA, mode) +#define fd_set_dma_count(count) set_dma_count(FLOPPY_DMA, count) +#define fd_get_dma_residue() fd_ops->_get_dma_residue(FLOPPY_DMA) +#define fd_enable_irq() enable_irq(FLOPPY_IRQ) +#define fd_disable_irq() disable_irq(FLOPPY_IRQ) +#define fd_cacheflush(addr,size) /* nothing */ +#define fd_free_irq() free_irq(FLOPPY_IRQ, NULL); + +#include +#include /* for isa_bridge_pcidev */ + +#define fd_dma_setup(addr,size,mode,io) fd_ops->_dma_setup(addr,size,mode,io) + +static int fd_request_dma(void); + +struct fd_dma_ops { + void (*_disable_dma)(unsigned int dmanr); + void (*_free_dma)(unsigned int dmanr); + int (*_get_dma_residue)(unsigned int dummy); + int (*_dma_setup)(char *addr, unsigned long size, int mode, int io); +}; + +static int virtual_dma_count; +static int virtual_dma_residue; +static char *virtual_dma_addr; +static int virtual_dma_mode; +static int doing_vdma; +static struct fd_dma_ops *fd_ops; + +static irqreturn_t floppy_hardint(int irq, void *dev_id) +{ + unsigned char st; + int lcount; + char *lptr; + + if (!doing_vdma) + return floppy_interrupt(irq, dev_id); + + + st = 1; + for (lcount=virtual_dma_count, lptr=virtual_dma_addr; + lcount; lcount--, lptr++) { + st=inb(virtual_dma_port+4) & 0xa0 ; + if (st != 0xa0) + break; + if (virtual_dma_mode) + outb_p(*lptr, virtual_dma_port+5); + else + *lptr = inb_p(virtual_dma_port+5); + } + virtual_dma_count = lcount; + virtual_dma_addr = lptr; + st = inb(virtual_dma_port+4); + + if (st == 0x20) + return IRQ_HANDLED; + if (!(st & 0x20)) { + virtual_dma_residue += virtual_dma_count; + virtual_dma_count=0; + doing_vdma = 0; + floppy_interrupt(irq, dev_id); + return IRQ_HANDLED; + } + return IRQ_HANDLED; +} + +static void vdma_disable_dma(unsigned int dummy) +{ + doing_vdma = 0; + virtual_dma_residue += virtual_dma_count; + virtual_dma_count=0; +} + +static void vdma_nop(unsigned int dummy) +{ +} + + +static int vdma_get_dma_residue(unsigned int dummy) +{ + return virtual_dma_count + virtual_dma_residue; +} + + +static int fd_request_irq(void) +{ + if (can_use_virtual_dma) + return request_irq(FLOPPY_IRQ, floppy_hardint, + IRQF_DISABLED, "floppy", NULL); + else + return request_irq(FLOPPY_IRQ, floppy_interrupt, + IRQF_DISABLED, "floppy", NULL); +} + +static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io) +{ + doing_vdma = 1; + virtual_dma_port = io; + virtual_dma_mode = (mode == DMA_MODE_WRITE); + virtual_dma_addr = addr; + virtual_dma_count = size; + virtual_dma_residue = 0; + return 0; +} + +static int hard_dma_setup(char *addr, unsigned long size, int mode, int io) +{ + static unsigned long prev_size; + static dma_addr_t bus_addr = 0; + static char *prev_addr; + static int prev_dir; + int dir; + + doing_vdma = 0; + dir = (mode == DMA_MODE_READ) ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE; + + if (bus_addr + && (addr != prev_addr || size != prev_size || dir != prev_dir)) { + /* different from last time -- unmap prev */ + pci_unmap_single(isa_bridge_pcidev, bus_addr, prev_size, prev_dir); + bus_addr = 0; + } + + if (!bus_addr) /* need to map it */ + bus_addr = pci_map_single(isa_bridge_pcidev, addr, size, dir); + + /* remember this one as prev */ + prev_addr = addr; + prev_size = size; + prev_dir = dir; + + fd_clear_dma_ff(); + fd_cacheflush(addr, size); + fd_set_dma_mode(mode); + set_dma_addr(FLOPPY_DMA, bus_addr); + fd_set_dma_count(size); + virtual_dma_port = io; + fd_enable_dma(); + + return 0; +} + +static struct fd_dma_ops real_dma_ops = +{ + ._disable_dma = disable_dma, + ._free_dma = free_dma, + ._get_dma_residue = get_dma_residue, + ._dma_setup = hard_dma_setup +}; + +static struct fd_dma_ops virt_dma_ops = +{ + ._disable_dma = vdma_disable_dma, + ._free_dma = vdma_nop, + ._get_dma_residue = vdma_get_dma_residue, + ._dma_setup = vdma_dma_setup +}; + +static int fd_request_dma(void) +{ + if (can_use_virtual_dma & 1) { + fd_ops = &virt_dma_ops; + return 0; + } + else { + fd_ops = &real_dma_ops; + return request_dma(FLOPPY_DMA, "floppy"); + } +} + +static int FDC1 = 0x3f0; +static int FDC2 = -1; + +/* + * Again, the CMOS information not available + */ +#define FLOPPY0_TYPE 6 +#define FLOPPY1_TYPE 0 + +#define N_FDC 2 /* Don't change this! */ +#define N_DRIVE 8 + +/* + * The PowerPC has no problems with floppy DMA crossing 64k borders. + */ +#define CROSS_64KB(a,s) (0) + +#define EXTRA_FLOPPY_PARAMS + +#endif /* __KERNEL__ */ +#endif /* __ASM_POWERPC_FLOPPY_H */ diff --git a/arch/powerpc/include/asm/fs_pd.h b/arch/powerpc/include/asm/fs_pd.h new file mode 100644 index 00000000000..9361cd5342c --- /dev/null +++ b/arch/powerpc/include/asm/fs_pd.h @@ -0,0 +1,50 @@ +/* + * Platform information definitions. + * + * 2006 (c) MontaVista Software, Inc. + * Vitaly Bordug + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef FS_PD_H +#define FS_PD_H +#include +#include + +#ifdef CONFIG_CPM2 +#include + +#if defined(CONFIG_8260) +#include +#endif + +#define cpm2_map(member) (&cpm2_immr->member) +#define cpm2_map_size(member, size) (&cpm2_immr->member) +#define cpm2_unmap(addr) do {} while(0) +#endif + +#ifdef CONFIG_8xx +#include +#include + +extern immap_t __iomem *mpc8xx_immr; + +#define immr_map(member) (&mpc8xx_immr->member) +#define immr_map_size(member, size) (&mpc8xx_immr->member) +#define immr_unmap(addr) do {} while (0) +#endif + +static inline int uart_baudrate(void) +{ + return get_baudrate(); +} + +static inline int uart_clock(void) +{ + return ppc_proc_freq; +} + +#endif diff --git a/arch/powerpc/include/asm/fsl_gtm.h b/arch/powerpc/include/asm/fsl_gtm.h new file mode 100644 index 00000000000..8e8c9b5032d --- /dev/null +++ b/arch/powerpc/include/asm/fsl_gtm.h @@ -0,0 +1,47 @@ +/* + * Freescale General-purpose Timers Module + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish + * Jerry Huang + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __ASM_FSL_GTM_H +#define __ASM_FSL_GTM_H + +#include + +struct gtm; + +struct gtm_timer { + unsigned int irq; + + struct gtm *gtm; + bool requested; + u8 __iomem *gtcfr; + __be16 __iomem *gtmdr; + __be16 __iomem *gtpsr; + __be16 __iomem *gtcnr; + __be16 __iomem *gtrfr; + __be16 __iomem *gtevr; +}; + +extern struct gtm_timer *gtm_get_timer16(void); +extern struct gtm_timer *gtm_get_specific_timer16(struct gtm *gtm, + unsigned int timer); +extern void gtm_put_timer16(struct gtm_timer *tmr); +extern int gtm_set_timer16(struct gtm_timer *tmr, unsigned long usec, + bool reload); +extern int gtm_set_exact_timer16(struct gtm_timer *tmr, u16 usec, + bool reload); +extern void gtm_stop_timer16(struct gtm_timer *tmr); +extern void gtm_ack_timer16(struct gtm_timer *tmr, u16 events); + +#endif /* __ASM_FSL_GTM_H */ diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h new file mode 100644 index 00000000000..303f5484c05 --- /dev/null +++ b/arch/powerpc/include/asm/fsl_lbc.h @@ -0,0 +1,311 @@ +/* Freescale Local Bus Controller + * + * Copyright (c) 2006-2007 Freescale Semiconductor + * + * Authors: Nick Spence , + * Scott Wood + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_FSL_LBC_H +#define __ASM_FSL_LBC_H + +#include +#include +#include + +struct fsl_lbc_bank { + __be32 br; /**< Base Register */ +#define BR_BA 0xFFFF8000 +#define BR_BA_SHIFT 15 +#define BR_PS 0x00001800 +#define BR_PS_SHIFT 11 +#define BR_PS_8 0x00000800 /* Port Size 8 bit */ +#define BR_PS_16 0x00001000 /* Port Size 16 bit */ +#define BR_PS_32 0x00001800 /* Port Size 32 bit */ +#define BR_DECC 0x00000600 +#define BR_DECC_SHIFT 9 +#define BR_DECC_OFF 0x00000000 /* HW ECC checking and generation off */ +#define BR_DECC_CHK 0x00000200 /* HW ECC checking on, generation off */ +#define BR_DECC_CHK_GEN 0x00000400 /* HW ECC checking and generation on */ +#define BR_WP 0x00000100 +#define BR_WP_SHIFT 8 +#define BR_MSEL 0x000000E0 +#define BR_MSEL_SHIFT 5 +#define BR_MS_GPCM 0x00000000 /* GPCM */ +#define BR_MS_FCM 0x00000020 /* FCM */ +#define BR_MS_SDRAM 0x00000060 /* SDRAM */ +#define BR_MS_UPMA 0x00000080 /* UPMA */ +#define BR_MS_UPMB 0x000000A0 /* UPMB */ +#define BR_MS_UPMC 0x000000C0 /* UPMC */ +#define BR_V 0x00000001 +#define BR_V_SHIFT 0 +#define BR_RES ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_V) + + __be32 or; /**< Base Register */ +#define OR0 0x5004 +#define OR1 0x500C +#define OR2 0x5014 +#define OR3 0x501C +#define OR4 0x5024 +#define OR5 0x502C +#define OR6 0x5034 +#define OR7 0x503C + +#define OR_FCM_AM 0xFFFF8000 +#define OR_FCM_AM_SHIFT 15 +#define OR_FCM_BCTLD 0x00001000 +#define OR_FCM_BCTLD_SHIFT 12 +#define OR_FCM_PGS 0x00000400 +#define OR_FCM_PGS_SHIFT 10 +#define OR_FCM_CSCT 0x00000200 +#define OR_FCM_CSCT_SHIFT 9 +#define OR_FCM_CST 0x00000100 +#define OR_FCM_CST_SHIFT 8 +#define OR_FCM_CHT 0x00000080 +#define OR_FCM_CHT_SHIFT 7 +#define OR_FCM_SCY 0x00000070 +#define OR_FCM_SCY_SHIFT 4 +#define OR_FCM_SCY_1 0x00000010 +#define OR_FCM_SCY_2 0x00000020 +#define OR_FCM_SCY_3 0x00000030 +#define OR_FCM_SCY_4 0x00000040 +#define OR_FCM_SCY_5 0x00000050 +#define OR_FCM_SCY_6 0x00000060 +#define OR_FCM_SCY_7 0x00000070 +#define OR_FCM_RST 0x00000008 +#define OR_FCM_RST_SHIFT 3 +#define OR_FCM_TRLX 0x00000004 +#define OR_FCM_TRLX_SHIFT 2 +#define OR_FCM_EHTR 0x00000002 +#define OR_FCM_EHTR_SHIFT 1 +}; + +struct fsl_lbc_regs { + struct fsl_lbc_bank bank[8]; + u8 res0[0x28]; + __be32 mar; /**< UPM Address Register */ + u8 res1[0x4]; + __be32 mamr; /**< UPMA Mode Register */ +#define MxMR_OP_NO (0 << 28) /**< normal operation */ +#define MxMR_OP_WA (1 << 28) /**< write array */ +#define MxMR_OP_RA (2 << 28) /**< read array */ +#define MxMR_OP_RP (3 << 28) /**< run pattern */ +#define MxMR_MAD 0x3f /**< machine address */ + __be32 mbmr; /**< UPMB Mode Register */ + __be32 mcmr; /**< UPMC Mode Register */ + u8 res2[0x8]; + __be32 mrtpr; /**< Memory Refresh Timer Prescaler Register */ + __be32 mdr; /**< UPM Data Register */ + u8 res3[0x4]; + __be32 lsor; /**< Special Operation Initiation Register */ + __be32 lsdmr; /**< SDRAM Mode Register */ + u8 res4[0x8]; + __be32 lurt; /**< UPM Refresh Timer */ + __be32 lsrt; /**< SDRAM Refresh Timer */ + u8 res5[0x8]; + __be32 ltesr; /**< Transfer Error Status Register */ +#define LTESR_BM 0x80000000 +#define LTESR_FCT 0x40000000 +#define LTESR_PAR 0x20000000 +#define LTESR_WP 0x04000000 +#define LTESR_ATMW 0x00800000 +#define LTESR_ATMR 0x00400000 +#define LTESR_CS 0x00080000 +#define LTESR_CC 0x00000001 +#define LTESR_NAND_MASK (LTESR_FCT | LTESR_PAR | LTESR_CC) + __be32 ltedr; /**< Transfer Error Disable Register */ + __be32 lteir; /**< Transfer Error Interrupt Register */ + __be32 lteatr; /**< Transfer Error Attributes Register */ + __be32 ltear; /**< Transfer Error Address Register */ + u8 res6[0xC]; + __be32 lbcr; /**< Configuration Register */ +#define LBCR_LDIS 0x80000000 +#define LBCR_LDIS_SHIFT 31 +#define LBCR_BCTLC 0x00C00000 +#define LBCR_BCTLC_SHIFT 22 +#define LBCR_AHD 0x00200000 +#define LBCR_LPBSE 0x00020000 +#define LBCR_LPBSE_SHIFT 17 +#define LBCR_EPAR 0x00010000 +#define LBCR_EPAR_SHIFT 16 +#define LBCR_BMT 0x0000FF00 +#define LBCR_BMT_SHIFT 8 +#define LBCR_INIT 0x00040000 + __be32 lcrr; /**< Clock Ratio Register */ +#define LCRR_DBYP 0x80000000 +#define LCRR_DBYP_SHIFT 31 +#define LCRR_BUFCMDC 0x30000000 +#define LCRR_BUFCMDC_SHIFT 28 +#define LCRR_ECL 0x03000000 +#define LCRR_ECL_SHIFT 24 +#define LCRR_EADC 0x00030000 +#define LCRR_EADC_SHIFT 16 +#define LCRR_CLKDIV 0x0000000F +#define LCRR_CLKDIV_SHIFT 0 + u8 res7[0x8]; + __be32 fmr; /**< Flash Mode Register */ +#define FMR_CWTO 0x0000F000 +#define FMR_CWTO_SHIFT 12 +#define FMR_BOOT 0x00000800 +#define FMR_ECCM 0x00000100 +#define FMR_AL 0x00000030 +#define FMR_AL_SHIFT 4 +#define FMR_OP 0x00000003 +#define FMR_OP_SHIFT 0 + __be32 fir; /**< Flash Instruction Register */ +#define FIR_OP0 0xF0000000 +#define FIR_OP0_SHIFT 28 +#define FIR_OP1 0x0F000000 +#define FIR_OP1_SHIFT 24 +#define FIR_OP2 0x00F00000 +#define FIR_OP2_SHIFT 20 +#define FIR_OP3 0x000F0000 +#define FIR_OP3_SHIFT 16 +#define FIR_OP4 0x0000F000 +#define FIR_OP4_SHIFT 12 +#define FIR_OP5 0x00000F00 +#define FIR_OP5_SHIFT 8 +#define FIR_OP6 0x000000F0 +#define FIR_OP6_SHIFT 4 +#define FIR_OP7 0x0000000F +#define FIR_OP7_SHIFT 0 +#define FIR_OP_NOP 0x0 /* No operation and end of sequence */ +#define FIR_OP_CA 0x1 /* Issue current column address */ +#define FIR_OP_PA 0x2 /* Issue current block+page address */ +#define FIR_OP_UA 0x3 /* Issue user defined address */ +#define FIR_OP_CM0 0x4 /* Issue command from FCR[CMD0] */ +#define FIR_OP_CM1 0x5 /* Issue command from FCR[CMD1] */ +#define FIR_OP_CM2 0x6 /* Issue command from FCR[CMD2] */ +#define FIR_OP_CM3 0x7 /* Issue command from FCR[CMD3] */ +#define FIR_OP_WB 0x8 /* Write FBCR bytes from FCM buffer */ +#define FIR_OP_WS 0x9 /* Write 1 or 2 bytes from MDR[AS] */ +#define FIR_OP_RB 0xA /* Read FBCR bytes to FCM buffer */ +#define FIR_OP_RS 0xB /* Read 1 or 2 bytes to MDR[AS] */ +#define FIR_OP_CW0 0xC /* Wait then issue FCR[CMD0] */ +#define FIR_OP_CW1 0xD /* Wait then issue FCR[CMD1] */ +#define FIR_OP_RBW 0xE /* Wait then read FBCR bytes */ +#define FIR_OP_RSW 0xE /* Wait then read 1 or 2 bytes */ + __be32 fcr; /**< Flash Command Register */ +#define FCR_CMD0 0xFF000000 +#define FCR_CMD0_SHIFT 24 +#define FCR_CMD1 0x00FF0000 +#define FCR_CMD1_SHIFT 16 +#define FCR_CMD2 0x0000FF00 +#define FCR_CMD2_SHIFT 8 +#define FCR_CMD3 0x000000FF +#define FCR_CMD3_SHIFT 0 + __be32 fbar; /**< Flash Block Address Register */ +#define FBAR_BLK 0x00FFFFFF + __be32 fpar; /**< Flash Page Address Register */ +#define FPAR_SP_PI 0x00007C00 +#define FPAR_SP_PI_SHIFT 10 +#define FPAR_SP_MS 0x00000200 +#define FPAR_SP_CI 0x000001FF +#define FPAR_SP_CI_SHIFT 0 +#define FPAR_LP_PI 0x0003F000 +#define FPAR_LP_PI_SHIFT 12 +#define FPAR_LP_MS 0x00000800 +#define FPAR_LP_CI 0x000007FF +#define FPAR_LP_CI_SHIFT 0 + __be32 fbcr; /**< Flash Byte Count Register */ +#define FBCR_BC 0x00000FFF + u8 res11[0x8]; + u8 res8[0xF00]; +}; + +extern struct fsl_lbc_regs __iomem *fsl_lbc_regs; +extern spinlock_t fsl_lbc_lock; + +/* + * FSL UPM routines + */ +struct fsl_upm { + __be32 __iomem *mxmr; + int width; +}; + +extern int fsl_lbc_find(phys_addr_t addr_base); +extern int fsl_upm_find(phys_addr_t addr_base, struct fsl_upm *upm); + +/** + * fsl_upm_start_pattern - start UPM patterns execution + * @upm: pointer to the fsl_upm structure obtained via fsl_upm_find + * @pat_offset: UPM pattern offset for the command to be executed + * + * This routine programmes UPM so the next memory access that hits an UPM + * will trigger pattern execution, starting at pat_offset. + */ +static inline void fsl_upm_start_pattern(struct fsl_upm *upm, u8 pat_offset) +{ + clrsetbits_be32(upm->mxmr, MxMR_MAD, MxMR_OP_RP | pat_offset); +} + +/** + * fsl_upm_end_pattern - end UPM patterns execution + * @upm: pointer to the fsl_upm structure obtained via fsl_upm_find + * + * This routine reverts UPM to normal operation mode. + */ +static inline void fsl_upm_end_pattern(struct fsl_upm *upm) +{ + clrbits32(upm->mxmr, MxMR_OP_RP); + + while (in_be32(upm->mxmr) & MxMR_OP_RP) + cpu_relax(); +} + +/** + * fsl_upm_run_pattern - actually run an UPM pattern + * @upm: pointer to the fsl_upm structure obtained via fsl_upm_find + * @io_base: remapped pointer to where memory access should happen + * @mar: MAR register content during pattern execution + * + * This function triggers dummy write to the memory specified by the io_base, + * thus UPM pattern actually executed. Note that mar usage depends on the + * pre-programmed AMX bits in the UPM RAM. + */ +static inline int fsl_upm_run_pattern(struct fsl_upm *upm, + void __iomem *io_base, u32 mar) +{ + int ret = 0; + unsigned long flags; + + spin_lock_irqsave(&fsl_lbc_lock, flags); + + out_be32(&fsl_lbc_regs->mar, mar << (32 - upm->width)); + + switch (upm->width) { + case 8: + out_8(io_base, 0x0); + break; + case 16: + out_be16(io_base, 0x0); + break; + case 32: + out_be32(io_base, 0x0); + break; + default: + ret = -EINVAL; + break; + } + + spin_unlock_irqrestore(&fsl_lbc_lock, flags); + + return ret; +} + +#endif /* __ASM_FSL_LBC_H */ diff --git a/arch/powerpc/include/asm/ftrace.h b/arch/powerpc/include/asm/ftrace.h new file mode 100644 index 00000000000..de921326cca --- /dev/null +++ b/arch/powerpc/include/asm/ftrace.h @@ -0,0 +1,14 @@ +#ifndef _ASM_POWERPC_FTRACE +#define _ASM_POWERPC_FTRACE + +#ifdef CONFIG_FTRACE +#define MCOUNT_ADDR ((long)(_mcount)) +#define MCOUNT_INSN_SIZE 4 /* sizeof mcount call */ + +#ifndef __ASSEMBLY__ +extern void _mcount(void); +#endif + +#endif + +#endif /* _ASM_POWERPC_FTRACE */ diff --git a/arch/powerpc/include/asm/futex.h b/arch/powerpc/include/asm/futex.h new file mode 100644 index 00000000000..6d406c5c5de --- /dev/null +++ b/arch/powerpc/include/asm/futex.h @@ -0,0 +1,117 @@ +#ifndef _ASM_POWERPC_FUTEX_H +#define _ASM_POWERPC_FUTEX_H + +#ifdef __KERNEL__ + +#include +#include +#include +#include +#include + +#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ + __asm__ __volatile ( \ + LWSYNC_ON_SMP \ +"1: lwarx %0,0,%2\n" \ + insn \ + PPC405_ERR77(0, %2) \ +"2: stwcx. %1,0,%2\n" \ + "bne- 1b\n" \ + "li %1,0\n" \ +"3: .section .fixup,\"ax\"\n" \ +"4: li %1,%3\n" \ + "b 3b\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + ".align 3\n" \ + PPC_LONG "1b,4b,2b,4b\n" \ + ".previous" \ + : "=&r" (oldval), "=&r" (ret) \ + : "b" (uaddr), "i" (-EFAULT), "1" (oparg) \ + : "cr0", "memory") + +static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr) +{ + int op = (encoded_op >> 28) & 7; + int cmp = (encoded_op >> 24) & 15; + int oparg = (encoded_op << 8) >> 20; + int cmparg = (encoded_op << 20) >> 20; + int oldval = 0, ret; + if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) + oparg = 1 << oparg; + + if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int))) + return -EFAULT; + + pagefault_disable(); + + switch (op) { + case FUTEX_OP_SET: + __futex_atomic_op("", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_ADD: + __futex_atomic_op("add %1,%0,%1\n", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_OR: + __futex_atomic_op("or %1,%0,%1\n", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_ANDN: + __futex_atomic_op("andc %1,%0,%1\n", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_XOR: + __futex_atomic_op("xor %1,%0,%1\n", ret, oldval, uaddr, oparg); + break; + default: + ret = -ENOSYS; + } + + pagefault_enable(); + + if (!ret) { + switch (cmp) { + case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break; + case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break; + case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break; + case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break; + case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break; + case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break; + default: ret = -ENOSYS; + } + } + return ret; +} + +static inline int +futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval) +{ + int prev; + + if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) + return -EFAULT; + + __asm__ __volatile__ ( + LWSYNC_ON_SMP +"1: lwarx %0,0,%2 # futex_atomic_cmpxchg_inatomic\n\ + cmpw 0,%0,%3\n\ + bne- 3f\n" + PPC405_ERR77(0,%2) +"2: stwcx. %4,0,%2\n\ + bne- 1b\n" + ISYNC_ON_SMP +"3: .section .fixup,\"ax\"\n\ +4: li %0,%5\n\ + b 3b\n\ + .previous\n\ + .section __ex_table,\"a\"\n\ + .align 3\n\ + " PPC_LONG "1b,4b,2b,4b\n\ + .previous" \ + : "=&r" (prev), "+m" (*uaddr) + : "r" (uaddr), "r" (oldval), "r" (newval), "i" (-EFAULT) + : "cc", "memory"); + + return prev; +} + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_FUTEX_H */ diff --git a/arch/powerpc/include/asm/gpio.h b/arch/powerpc/include/asm/gpio.h new file mode 100644 index 00000000000..ea04632399d --- /dev/null +++ b/arch/powerpc/include/asm/gpio.h @@ -0,0 +1,56 @@ +/* + * Generic GPIO API implementation for PowerPC. + * + * Copyright (c) 2007-2008 MontaVista Software, Inc. + * + * Author: Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __ASM_POWERPC_GPIO_H +#define __ASM_POWERPC_GPIO_H + +#include +#include + +#ifdef CONFIG_GPIOLIB + +/* + * We don't (yet) implement inlined/rapid versions for on-chip gpios. + * Just call gpiolib. + */ +static inline int gpio_get_value(unsigned int gpio) +{ + return __gpio_get_value(gpio); +} + +static inline void gpio_set_value(unsigned int gpio, int value) +{ + __gpio_set_value(gpio, value); +} + +static inline int gpio_cansleep(unsigned int gpio) +{ + return __gpio_cansleep(gpio); +} + +/* + * Not implemented, yet. + */ +static inline int gpio_to_irq(unsigned int gpio) +{ + return -ENOSYS; +} + +static inline int irq_to_gpio(unsigned int irq) +{ + return -EINVAL; +} + +#endif /* CONFIG_GPIOLIB */ + +#endif /* __ASM_POWERPC_GPIO_H */ diff --git a/arch/powerpc/include/asm/grackle.h b/arch/powerpc/include/asm/grackle.h new file mode 100644 index 00000000000..bd7812a519d --- /dev/null +++ b/arch/powerpc/include/asm/grackle.h @@ -0,0 +1,12 @@ +#ifndef _ASM_POWERPC_GRACKLE_H +#define _ASM_POWERPC_GRACKLE_H +#ifdef __KERNEL__ +/* + * Functions for setting up and using a MPC106 northbridge + */ + +#include + +extern void setup_grackle(struct pci_controller *hose); +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_GRACKLE_H */ diff --git a/arch/powerpc/include/asm/hardirq.h b/arch/powerpc/include/asm/hardirq.h new file mode 100644 index 00000000000..288e14d53b7 --- /dev/null +++ b/arch/powerpc/include/asm/hardirq.h @@ -0,0 +1,29 @@ +#ifndef _ASM_POWERPC_HARDIRQ_H +#define _ASM_POWERPC_HARDIRQ_H +#ifdef __KERNEL__ + +#include +#include + +/* The __last_jiffy_stamp field is needed to ensure that no decrementer + * interrupt is lost on SMP machines. Since on most CPUs it is in the same + * cache line as local_irq_count, it is cheap to access and is also used on UP + * for uniformity. + */ +typedef struct { + unsigned int __softirq_pending; /* set_bit is used on this */ + unsigned int __last_jiffy_stamp; +} ____cacheline_aligned irq_cpustat_t; + +#include /* Standard mappings for irq_cpustat_t above */ + +#define last_jiffy_stamp(cpu) __IRQ_STAT((cpu), __last_jiffy_stamp) + +static inline void ack_bad_irq(int irq) +{ + printk(KERN_CRIT "illegal vector %d received!\n", irq); + BUG(); +} + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_HARDIRQ_H */ diff --git a/arch/powerpc/include/asm/heathrow.h b/arch/powerpc/include/asm/heathrow.h new file mode 100644 index 00000000000..93f54958a9d --- /dev/null +++ b/arch/powerpc/include/asm/heathrow.h @@ -0,0 +1,67 @@ +#ifndef _ASM_POWERPC_HEATHROW_H +#define _ASM_POWERPC_HEATHROW_H +#ifdef __KERNEL__ +/* + * heathrow.h: definitions for using the "Heathrow" I/O controller chip. + * + * Grabbed from Open Firmware definitions on a PowerBook G3 Series + * + * Copyright (C) 1997 Paul Mackerras. + */ + +/* Front light color on Yikes/B&W G3. 32 bits */ +#define HEATHROW_FRONT_LIGHT 0x32 /* (set to 0 or 0xffffffff) */ + +/* Brightness/contrast (gossamer iMac ?). 8 bits */ +#define HEATHROW_BRIGHTNESS_CNTL 0x32 +#define HEATHROW_CONTRAST_CNTL 0x33 + +/* offset from ohare base for feature control register */ +#define HEATHROW_MBCR 0x34 /* Media bay control */ +#define HEATHROW_FCR 0x38 /* Feature control */ +#define HEATHROW_AUX_CNTL_REG 0x3c /* Aux control */ + +/* + * Bits in feature control register. + * Bits postfixed with a _N are in inverse logic + */ +#define HRW_SCC_TRANS_EN_N 0x00000001 /* Also controls modem power */ +#define HRW_BAY_POWER_N 0x00000002 +#define HRW_BAY_PCI_ENABLE 0x00000004 +#define HRW_BAY_IDE_ENABLE 0x00000008 +#define HRW_BAY_FLOPPY_ENABLE 0x00000010 +#define HRW_IDE0_ENABLE 0x00000020 +#define HRW_IDE0_RESET_N 0x00000040 +#define HRW_BAY_DEV_MASK 0x0000001c +#define HRW_BAY_RESET_N 0x00000080 +#define HRW_IOBUS_ENABLE 0x00000100 /* Internal IDE ? */ +#define HRW_SCC_ENABLE 0x00000200 +#define HRW_MESH_ENABLE 0x00000400 +#define HRW_SWIM_ENABLE 0x00000800 +#define HRW_SOUND_POWER_N 0x00001000 +#define HRW_SOUND_CLK_ENABLE 0x00002000 +#define HRW_SCCA_IO 0x00004000 +#define HRW_SCCB_IO 0x00008000 +#define HRW_PORT_OR_DESK_VIA_N 0x00010000 /* This one is 0 on PowerBook */ +#define HRW_PWM_MON_ID_N 0x00020000 /* ??? (0) */ +#define HRW_HOOK_MB_CNT_N 0x00040000 /* ??? (0) */ +#define HRW_SWIM_CLONE_FLOPPY 0x00080000 /* ??? (0) */ +#define HRW_AUD_RUN22 0x00100000 /* ??? (1) */ +#define HRW_SCSI_LINK_MODE 0x00200000 /* Read ??? (1) */ +#define HRW_ARB_BYPASS 0x00400000 /* Disable internal PCI arbitrer */ +#define HRW_IDE1_RESET_N 0x00800000 /* Media bay */ +#define HRW_SLOW_SCC_PCLK 0x01000000 /* ??? (0) */ +#define HRW_RESET_SCC 0x02000000 +#define HRW_MFDC_CELL_ENABLE 0x04000000 /* ??? (0) */ +#define HRW_USE_MFDC 0x08000000 /* ??? (0) */ +#define HRW_BMAC_IO_ENABLE 0x60000000 /* two bits, not documented in OF */ +#define HRW_BMAC_RESET 0x80000000 /* not documented in OF */ + +/* We OR those features at boot on desktop G3s */ +#define HRW_DEFAULTS (HRW_SCCA_IO | HRW_SCCB_IO | HRW_SCC_ENABLE) + +/* Looks like Heathrow has some sort of GPIOs as well... */ +#define HRW_GPIO_MODEM_RESET 0x6d + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_HEATHROW_H */ diff --git a/arch/powerpc/include/asm/highmem.h b/arch/powerpc/include/asm/highmem.h new file mode 100644 index 00000000000..5d99b6489d5 --- /dev/null +++ b/arch/powerpc/include/asm/highmem.h @@ -0,0 +1,138 @@ +/* + * highmem.h: virtual kernel memory mappings for high memory + * + * PowerPC version, stolen from the i386 version. + * + * Used in CONFIG_HIGHMEM systems for memory pages which + * are not addressable by direct kernel virtual addresses. + * + * Copyright (C) 1999 Gerhard Wichert, Siemens AG + * Gerhard.Wichert@pdb.siemens.de + * + * + * Redesigned the x86 32-bit VM architecture to deal with + * up to 16 Terrabyte physical memory. With current x86 CPUs + * we now support up to 64 Gigabytes physical RAM. + * + * Copyright (C) 1999 Ingo Molnar + */ + +#ifndef _ASM_HIGHMEM_H +#define _ASM_HIGHMEM_H + +#ifdef __KERNEL__ + +#include +#include +#include +#include +#include +#include + +extern pte_t *kmap_pte; +extern pgprot_t kmap_prot; +extern pte_t *pkmap_page_table; + +/* + * Right now we initialize only a single pte table. It can be extended + * easily, subsequent pte tables have to be allocated in one physical + * chunk of RAM. + */ +#define LAST_PKMAP (1 << PTE_SHIFT) +#define LAST_PKMAP_MASK (LAST_PKMAP-1) +#define PKMAP_BASE ((FIXADDR_START - PAGE_SIZE*(LAST_PKMAP + 1)) & PMD_MASK) +#define PKMAP_NR(virt) ((virt-PKMAP_BASE) >> PAGE_SHIFT) +#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT)) + +extern void *kmap_high(struct page *page); +extern void kunmap_high(struct page *page); + +static inline void *kmap(struct page *page) +{ + might_sleep(); + if (!PageHighMem(page)) + return page_address(page); + return kmap_high(page); +} + +static inline void kunmap(struct page *page) +{ + BUG_ON(in_interrupt()); + if (!PageHighMem(page)) + return; + kunmap_high(page); +} + +/* + * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap + * gives a more generic (and caching) interface. But kmap_atomic can + * be used in IRQ contexts, so in some (very limited) cases we need + * it. + */ +static inline void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot) +{ + unsigned int idx; + unsigned long vaddr; + + /* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */ + pagefault_disable(); + if (!PageHighMem(page)) + return page_address(page); + + idx = type + KM_TYPE_NR*smp_processor_id(); + vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); +#ifdef CONFIG_DEBUG_HIGHMEM + BUG_ON(!pte_none(*(kmap_pte-idx))); +#endif + set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot)); + flush_tlb_page(NULL, vaddr); + + return (void*) vaddr; +} + +static inline void *kmap_atomic(struct page *page, enum km_type type) +{ + return kmap_atomic_prot(page, type, kmap_prot); +} + +static inline void kunmap_atomic(void *kvaddr, enum km_type type) +{ +#ifdef CONFIG_DEBUG_HIGHMEM + unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK; + enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id(); + + if (vaddr < __fix_to_virt(FIX_KMAP_END)) { + pagefault_enable(); + return; + } + + BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx)); + + /* + * force other mappings to Oops if they'll try to access + * this pte without first remap it + */ + pte_clear(&init_mm, vaddr, kmap_pte-idx); + flush_tlb_page(NULL, vaddr); +#endif + pagefault_enable(); +} + +static inline struct page *kmap_atomic_to_page(void *ptr) +{ + unsigned long idx, vaddr = (unsigned long) ptr; + pte_t *pte; + + if (vaddr < FIXADDR_START) + return virt_to_page(ptr); + + idx = virt_to_fix(vaddr); + pte = kmap_pte - (idx - FIX_KMAP_BEGIN); + return pte_page(*pte); +} + +#define flush_cache_kmaps() flush_cache_all() + +#endif /* __KERNEL__ */ + +#endif /* _ASM_HIGHMEM_H */ diff --git a/arch/powerpc/include/asm/hugetlb.h b/arch/powerpc/include/asm/hugetlb.h new file mode 100644 index 00000000000..26f0d0ab27a --- /dev/null +++ b/arch/powerpc/include/asm/hugetlb.h @@ -0,0 +1,75 @@ +#ifndef _ASM_POWERPC_HUGETLB_H +#define _ASM_POWERPC_HUGETLB_H + +#include + + +int is_hugepage_only_range(struct mm_struct *mm, unsigned long addr, + unsigned long len); + +void hugetlb_free_pgd_range(struct mmu_gather *tlb, unsigned long addr, + unsigned long end, unsigned long floor, + unsigned long ceiling); + +void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pte); + +pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, + pte_t *ptep); + +/* + * If the arch doesn't supply something else, assume that hugepage + * size aligned regions are ok without further preparation. + */ +static inline int prepare_hugepage_range(struct file *file, + unsigned long addr, unsigned long len) +{ + struct hstate *h = hstate_file(file); + if (len & ~huge_page_mask(h)) + return -EINVAL; + if (addr & ~huge_page_mask(h)) + return -EINVAL; + return 0; +} + +static inline void hugetlb_prefault_arch_hook(struct mm_struct *mm) +{ +} + +static inline void huge_ptep_clear_flush(struct vm_area_struct *vma, + unsigned long addr, pte_t *ptep) +{ +} + +static inline int huge_pte_none(pte_t pte) +{ + return pte_none(pte); +} + +static inline pte_t huge_pte_wrprotect(pte_t pte) +{ + return pte_wrprotect(pte); +} + +static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma, + unsigned long addr, pte_t *ptep, + pte_t pte, int dirty) +{ + return ptep_set_access_flags(vma, addr, ptep, pte, dirty); +} + +static inline pte_t huge_ptep_get(pte_t *ptep) +{ + return *ptep; +} + +static inline int arch_prepare_hugepage(struct page *page) +{ + return 0; +} + +static inline void arch_release_hugepage(struct page *page) +{ +} + +#endif /* _ASM_POWERPC_HUGETLB_H */ diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h new file mode 100644 index 00000000000..fbe2932fa9e --- /dev/null +++ b/arch/powerpc/include/asm/hvcall.h @@ -0,0 +1,296 @@ +#ifndef _ASM_POWERPC_HVCALL_H +#define _ASM_POWERPC_HVCALL_H +#ifdef __KERNEL__ + +#define HVSC .long 0x44000022 + +#define H_SUCCESS 0 +#define H_BUSY 1 /* Hardware busy -- retry later */ +#define H_CLOSED 2 /* Resource closed */ +#define H_NOT_AVAILABLE 3 +#define H_CONSTRAINED 4 /* Resource request constrained to max allowed */ +#define H_PARTIAL 5 +#define H_IN_PROGRESS 14 /* Kind of like busy */ +#define H_PAGE_REGISTERED 15 +#define H_PARTIAL_STORE 16 +#define H_PENDING 17 /* returned from H_POLL_PENDING */ +#define H_CONTINUE 18 /* Returned from H_Join on success */ +#define H_LONG_BUSY_START_RANGE 9900 /* Start of long busy range */ +#define H_LONG_BUSY_ORDER_1_MSEC 9900 /* Long busy, hint that 1msec \ + is a good time to retry */ +#define H_LONG_BUSY_ORDER_10_MSEC 9901 /* Long busy, hint that 10msec \ + is a good time to retry */ +#define H_LONG_BUSY_ORDER_100_MSEC 9902 /* Long busy, hint that 100msec \ + is a good time to retry */ +#define H_LONG_BUSY_ORDER_1_SEC 9903 /* Long busy, hint that 1sec \ + is a good time to retry */ +#define H_LONG_BUSY_ORDER_10_SEC 9904 /* Long busy, hint that 10sec \ + is a good time to retry */ +#define H_LONG_BUSY_ORDER_100_SEC 9905 /* Long busy, hint that 100sec \ + is a good time to retry */ +#define H_LONG_BUSY_END_RANGE 9905 /* End of long busy range */ +#define H_HARDWARE -1 /* Hardware error */ +#define H_FUNCTION -2 /* Function not supported */ +#define H_PRIVILEGE -3 /* Caller not privileged */ +#define H_PARAMETER -4 /* Parameter invalid, out-of-range or conflicting */ +#define H_BAD_MODE -5 /* Illegal msr value */ +#define H_PTEG_FULL -6 /* PTEG is full */ +#define H_NOT_FOUND -7 /* PTE was not found" */ +#define H_RESERVED_DABR -8 /* DABR address is reserved by the hypervisor on this processor" */ +#define H_NO_MEM -9 +#define H_AUTHORITY -10 +#define H_PERMISSION -11 +#define H_DROPPED -12 +#define H_SOURCE_PARM -13 +#define H_DEST_PARM -14 +#define H_REMOTE_PARM -15 +#define H_RESOURCE -16 +#define H_ADAPTER_PARM -17 +#define H_RH_PARM -18 +#define H_RCQ_PARM -19 +#define H_SCQ_PARM -20 +#define H_EQ_PARM -21 +#define H_RT_PARM -22 +#define H_ST_PARM -23 +#define H_SIGT_PARM -24 +#define H_TOKEN_PARM -25 +#define H_MLENGTH_PARM -27 +#define H_MEM_PARM -28 +#define H_MEM_ACCESS_PARM -29 +#define H_ATTR_PARM -30 +#define H_PORT_PARM -31 +#define H_MCG_PARM -32 +#define H_VL_PARM -33 +#define H_TSIZE_PARM -34 +#define H_TRACE_PARM -35 + +#define H_MASK_PARM -37 +#define H_MCG_FULL -38 +#define H_ALIAS_EXIST -39 +#define H_P_COUNTER -40 +#define H_TABLE_FULL -41 +#define H_ALT_TABLE -42 +#define H_MR_CONDITION -43 +#define H_NOT_ENOUGH_RESOURCES -44 +#define H_R_STATE -45 +#define H_RESCINDEND -46 + + +/* Long Busy is a condition that can be returned by the firmware + * when a call cannot be completed now, but the identical call + * should be retried later. This prevents calls blocking in the + * firmware for long periods of time. Annoyingly the firmware can return + * a range of return codes, hinting at how long we should wait before + * retrying. If you don't care for the hint, the macro below is a good + * way to check for the long_busy return codes + */ +#define H_IS_LONG_BUSY(x) ((x >= H_LONG_BUSY_START_RANGE) \ + && (x <= H_LONG_BUSY_END_RANGE)) + +/* Flags */ +#define H_LARGE_PAGE (1UL<<(63-16)) +#define H_EXACT (1UL<<(63-24)) /* Use exact PTE or return H_PTEG_FULL */ +#define H_R_XLATE (1UL<<(63-25)) /* include a valid logical page num in the pte if the valid bit is set */ +#define H_READ_4 (1UL<<(63-26)) /* Return 4 PTEs */ +#define H_PAGE_STATE_CHANGE (1UL<<(63-28)) +#define H_PAGE_UNUSED ((1UL<<(63-29)) | (1UL<<(63-30))) +#define H_PAGE_SET_UNUSED (H_PAGE_STATE_CHANGE | H_PAGE_UNUSED) +#define H_PAGE_SET_LOANED (H_PAGE_SET_UNUSED | (1UL<<(63-31))) +#define H_PAGE_SET_ACTIVE H_PAGE_STATE_CHANGE +#define H_AVPN (1UL<<(63-32)) /* An avpn is provided as a sanity test */ +#define H_ANDCOND (1UL<<(63-33)) +#define H_ICACHE_INVALIDATE (1UL<<(63-40)) /* icbi, etc. (ignored for IO pages) */ +#define H_ICACHE_SYNCHRONIZE (1UL<<(63-41)) /* dcbst, icbi, etc (ignored for IO pages */ +#define H_ZERO_PAGE (1UL<<(63-48)) /* zero the page before mapping (ignored for IO pages) */ +#define H_COPY_PAGE (1UL<<(63-49)) +#define H_N (1UL<<(63-61)) +#define H_PP1 (1UL<<(63-62)) +#define H_PP2 (1UL<<(63-63)) + +/* VASI States */ +#define H_VASI_INVALID 0 +#define H_VASI_ENABLED 1 +#define H_VASI_ABORTED 2 +#define H_VASI_SUSPENDING 3 +#define H_VASI_SUSPENDED 4 +#define H_VASI_RESUMED 5 +#define H_VASI_COMPLETED 6 + +/* DABRX flags */ +#define H_DABRX_HYPERVISOR (1UL<<(63-61)) +#define H_DABRX_KERNEL (1UL<<(63-62)) +#define H_DABRX_USER (1UL<<(63-63)) + +/* Each control block has to be on a 4K bondary */ +#define H_CB_ALIGNMENT 4096 + +/* pSeries hypervisor opcodes */ +#define H_REMOVE 0x04 +#define H_ENTER 0x08 +#define H_READ 0x0c +#define H_CLEAR_MOD 0x10 +#define H_CLEAR_REF 0x14 +#define H_PROTECT 0x18 +#define H_GET_TCE 0x1c +#define H_PUT_TCE 0x20 +#define H_SET_SPRG0 0x24 +#define H_SET_DABR 0x28 +#define H_PAGE_INIT 0x2c +#define H_SET_ASR 0x30 +#define H_ASR_ON 0x34 +#define H_ASR_OFF 0x38 +#define H_LOGICAL_CI_LOAD 0x3c +#define H_LOGICAL_CI_STORE 0x40 +#define H_LOGICAL_CACHE_LOAD 0x44 +#define H_LOGICAL_CACHE_STORE 0x48 +#define H_LOGICAL_ICBI 0x4c +#define H_LOGICAL_DCBF 0x50 +#define H_GET_TERM_CHAR 0x54 +#define H_PUT_TERM_CHAR 0x58 +#define H_REAL_TO_LOGICAL 0x5c +#define H_HYPERVISOR_DATA 0x60 +#define H_EOI 0x64 +#define H_CPPR 0x68 +#define H_IPI 0x6c +#define H_IPOLL 0x70 +#define H_XIRR 0x74 +#define H_PERFMON 0x7c +#define H_MIGRATE_DMA 0x78 +#define H_REGISTER_VPA 0xDC +#define H_CEDE 0xE0 +#define H_CONFER 0xE4 +#define H_PROD 0xE8 +#define H_GET_PPP 0xEC +#define H_SET_PPP 0xF0 +#define H_PURR 0xF4 +#define H_PIC 0xF8 +#define H_REG_CRQ 0xFC +#define H_FREE_CRQ 0x100 +#define H_VIO_SIGNAL 0x104 +#define H_SEND_CRQ 0x108 +#define H_COPY_RDMA 0x110 +#define H_REGISTER_LOGICAL_LAN 0x114 +#define H_FREE_LOGICAL_LAN 0x118 +#define H_ADD_LOGICAL_LAN_BUFFER 0x11C +#define H_SEND_LOGICAL_LAN 0x120 +#define H_BULK_REMOVE 0x124 +#define H_MULTICAST_CTRL 0x130 +#define H_SET_XDABR 0x134 +#define H_STUFF_TCE 0x138 +#define H_PUT_TCE_INDIRECT 0x13C +#define H_CHANGE_LOGICAL_LAN_MAC 0x14C +#define H_VTERM_PARTNER_INFO 0x150 +#define H_REGISTER_VTERM 0x154 +#define H_FREE_VTERM 0x158 +#define H_RESET_EVENTS 0x15C +#define H_ALLOC_RESOURCE 0x160 +#define H_FREE_RESOURCE 0x164 +#define H_MODIFY_QP 0x168 +#define H_QUERY_QP 0x16C +#define H_REREGISTER_PMR 0x170 +#define H_REGISTER_SMR 0x174 +#define H_QUERY_MR 0x178 +#define H_QUERY_MW 0x17C +#define H_QUERY_HCA 0x180 +#define H_QUERY_PORT 0x184 +#define H_MODIFY_PORT 0x188 +#define H_DEFINE_AQP1 0x18C +#define H_GET_TRACE_BUFFER 0x190 +#define H_DEFINE_AQP0 0x194 +#define H_RESIZE_MR 0x198 +#define H_ATTACH_MCQP 0x19C +#define H_DETACH_MCQP 0x1A0 +#define H_CREATE_RPT 0x1A4 +#define H_REMOVE_RPT 0x1A8 +#define H_REGISTER_RPAGES 0x1AC +#define H_DISABLE_AND_GETC 0x1B0 +#define H_ERROR_DATA 0x1B4 +#define H_GET_HCA_INFO 0x1B8 +#define H_GET_PERF_COUNT 0x1BC +#define H_MANAGE_TRACE 0x1C0 +#define H_FREE_LOGICAL_LAN_BUFFER 0x1D4 +#define H_QUERY_INT_STATE 0x1E4 +#define H_POLL_PENDING 0x1D8 +#define H_ILLAN_ATTRIBUTES 0x244 +#define H_JOIN 0x298 +#define H_VASI_STATE 0x2A4 +#define H_ENABLE_CRQ 0x2B0 +#define H_SET_MPP 0x2D0 +#define H_GET_MPP 0x2D4 +#define MAX_HCALL_OPCODE H_GET_MPP + +#ifndef __ASSEMBLY__ + +/** + * plpar_hcall_norets: - Make a pseries hypervisor call with no return arguments + * @opcode: The hypervisor call to make. + * + * This call supports up to 7 arguments and only returns the status of + * the hcall. Use this version where possible, its slightly faster than + * the other plpar_hcalls. + */ +long plpar_hcall_norets(unsigned long opcode, ...); + +/** + * plpar_hcall: - Make a pseries hypervisor call + * @opcode: The hypervisor call to make. + * @retbuf: Buffer to store up to 4 return arguments in. + * + * This call supports up to 6 arguments and 4 return arguments. Use + * PLPAR_HCALL_BUFSIZE to size the return argument buffer. + * + * Used for all but the craziest of phyp interfaces (see plpar_hcall9) + */ +#define PLPAR_HCALL_BUFSIZE 4 +long plpar_hcall(unsigned long opcode, unsigned long *retbuf, ...); + +/** + * plpar_hcall_raw: - Make a hypervisor call without calculating hcall stats + * @opcode: The hypervisor call to make. + * @retbuf: Buffer to store up to 4 return arguments in. + * + * This call supports up to 6 arguments and 4 return arguments. Use + * PLPAR_HCALL_BUFSIZE to size the return argument buffer. + * + * Used when phyp interface needs to be called in real mode. Similar to + * plpar_hcall, but plpar_hcall_raw works in real mode and does not + * calculate hypervisor call statistics. + */ +long plpar_hcall_raw(unsigned long opcode, unsigned long *retbuf, ...); + +/** + * plpar_hcall9: - Make a pseries hypervisor call with up to 9 return arguments + * @opcode: The hypervisor call to make. + * @retbuf: Buffer to store up to 9 return arguments in. + * + * This call supports up to 9 arguments and 9 return arguments. Use + * PLPAR_HCALL9_BUFSIZE to size the return argument buffer. + */ +#define PLPAR_HCALL9_BUFSIZE 9 +long plpar_hcall9(unsigned long opcode, unsigned long *retbuf, ...); + +/* For hcall instrumentation. One structure per-hcall, per-CPU */ +struct hcall_stats { + unsigned long num_calls; /* number of calls (on this CPU) */ + unsigned long tb_total; /* total wall time (mftb) of calls. */ + unsigned long purr_total; /* total cpu time (PURR) of calls. */ +}; +#define HCALL_STAT_ARRAY_SIZE ((MAX_HCALL_OPCODE >> 2) + 1) + +struct hvcall_mpp_data { + unsigned long entitled_mem; + unsigned long mapped_mem; + unsigned short group_num; + unsigned short pool_num; + unsigned char mem_weight; + unsigned char unallocated_mem_weight; + unsigned long unallocated_entitlement; /* value in bytes */ + unsigned long pool_size; + signed long loan_request; + unsigned long backing_mem; +}; + +int h_get_mpp(struct hvcall_mpp_data *); +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_HVCALL_H */ diff --git a/arch/powerpc/include/asm/hvconsole.h b/arch/powerpc/include/asm/hvconsole.h new file mode 100644 index 00000000000..35ea69e8121 --- /dev/null +++ b/arch/powerpc/include/asm/hvconsole.h @@ -0,0 +1,41 @@ +/* + * hvconsole.h + * Copyright (C) 2004 Ryan S Arnold, IBM Corporation + * + * LPAR console support. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _PPC64_HVCONSOLE_H +#define _PPC64_HVCONSOLE_H +#ifdef __KERNEL__ + +/* + * PSeries firmware will only send/recv up to 16 bytes of character data per + * hcall. + */ +#define MAX_VIO_PUT_CHARS 16 +#define SIZE_VIO_GET_CHARS 16 + +/* + * Vio firmware always attempts to fetch MAX_VIO_GET_CHARS chars. The 'count' + * parm is included to conform to put_chars() function pointer template + */ +extern int hvc_get_chars(uint32_t vtermno, char *buf, int count); +extern int hvc_put_chars(uint32_t vtermno, const char *buf, int count); + +#endif /* __KERNEL__ */ +#endif /* _PPC64_HVCONSOLE_H */ diff --git a/arch/powerpc/include/asm/hvcserver.h b/arch/powerpc/include/asm/hvcserver.h new file mode 100644 index 00000000000..67d7da3a4da --- /dev/null +++ b/arch/powerpc/include/asm/hvcserver.h @@ -0,0 +1,59 @@ +/* + * hvcserver.h + * Copyright (C) 2004 Ryan S Arnold, IBM Corporation + * + * PPC64 virtual I/O console server support. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _PPC64_HVCSERVER_H +#define _PPC64_HVCSERVER_H +#ifdef __KERNEL__ + +#include + +/* Converged Location Code length */ +#define HVCS_CLC_LENGTH 79 + +/** + * hvcs_partner_info - an element in a list of partner info + * @node: list_head denoting this partner_info struct's position in the list of + * partner info. + * @unit_address: The partner unit address of this entry. + * @partition_ID: The partner partition ID of this entry. + * @location_code: The converged location code of this entry + 1 char for the + * null-term. + * + * This structure outlines the format that partner info is presented to a caller + * of the hvcs partner info fetching functions. These are strung together into + * a list using linux kernel lists. + */ +struct hvcs_partner_info { + struct list_head node; + uint32_t unit_address; + uint32_t partition_ID; + char location_code[HVCS_CLC_LENGTH + 1]; /* CLC + 1 null-term char */ +}; + +extern int hvcs_free_partner_info(struct list_head *head); +extern int hvcs_get_partner_info(uint32_t unit_address, + struct list_head *head, unsigned long *pi_buff); +extern int hvcs_register_connection(uint32_t unit_address, + uint32_t p_partition_ID, uint32_t p_unit_address); +extern int hvcs_free_connection(uint32_t unit_address); + +#endif /* __KERNEL__ */ +#endif /* _PPC64_HVCSERVER_H */ diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h new file mode 100644 index 00000000000..f75a5fc64d2 --- /dev/null +++ b/arch/powerpc/include/asm/hw_irq.h @@ -0,0 +1,135 @@ +/* + * Copyright (C) 1999 Cort Dougan + */ +#ifndef _ASM_POWERPC_HW_IRQ_H +#define _ASM_POWERPC_HW_IRQ_H + +#ifdef __KERNEL__ + +#include +#include +#include +#include + +extern void timer_interrupt(struct pt_regs *); + +#ifdef CONFIG_PPC64 +#include + +static inline unsigned long local_get_flags(void) +{ + unsigned long flags; + + __asm__ __volatile__("lbz %0,%1(13)" + : "=r" (flags) + : "i" (offsetof(struct paca_struct, soft_enabled))); + + return flags; +} + +static inline unsigned long raw_local_irq_disable(void) +{ + unsigned long flags, zero; + + __asm__ __volatile__("li %1,0; lbz %0,%2(13); stb %1,%2(13)" + : "=r" (flags), "=&r" (zero) + : "i" (offsetof(struct paca_struct, soft_enabled)) + : "memory"); + + return flags; +} + +extern void raw_local_irq_restore(unsigned long); +extern void iseries_handle_interrupts(void); + +#define raw_local_irq_enable() raw_local_irq_restore(1) +#define raw_local_save_flags(flags) ((flags) = local_get_flags()) +#define raw_local_irq_save(flags) ((flags) = raw_local_irq_disable()) + +#define raw_irqs_disabled() (local_get_flags() == 0) +#define raw_irqs_disabled_flags(flags) ((flags) == 0) + +#define __hard_irq_enable() __mtmsrd(mfmsr() | MSR_EE, 1) +#define __hard_irq_disable() __mtmsrd(mfmsr() & ~MSR_EE, 1) + +#define hard_irq_disable() \ + do { \ + __hard_irq_disable(); \ + get_paca()->soft_enabled = 0; \ + get_paca()->hard_enabled = 0; \ + } while(0) + +static inline int irqs_disabled_flags(unsigned long flags) +{ + return flags == 0; +} + +#else + +#if defined(CONFIG_BOOKE) +#define SET_MSR_EE(x) mtmsr(x) +#define local_irq_restore(flags) __asm__ __volatile__("wrtee %0" : : "r" (flags) : "memory") +#else +#define SET_MSR_EE(x) mtmsr(x) +#define local_irq_restore(flags) mtmsr(flags) +#endif + +static inline void local_irq_disable(void) +{ +#ifdef CONFIG_BOOKE + __asm__ __volatile__("wrteei 0": : :"memory"); +#else + unsigned long msr; + __asm__ __volatile__("": : :"memory"); + msr = mfmsr(); + SET_MSR_EE(msr & ~MSR_EE); +#endif +} + +static inline void local_irq_enable(void) +{ +#ifdef CONFIG_BOOKE + __asm__ __volatile__("wrteei 1": : :"memory"); +#else + unsigned long msr; + __asm__ __volatile__("": : :"memory"); + msr = mfmsr(); + SET_MSR_EE(msr | MSR_EE); +#endif +} + +static inline void local_irq_save_ptr(unsigned long *flags) +{ + unsigned long msr; + msr = mfmsr(); + *flags = msr; +#ifdef CONFIG_BOOKE + __asm__ __volatile__("wrteei 0": : :"memory"); +#else + SET_MSR_EE(msr & ~MSR_EE); +#endif + __asm__ __volatile__("": : :"memory"); +} + +#define local_save_flags(flags) ((flags) = mfmsr()) +#define local_irq_save(flags) local_irq_save_ptr(&flags) +#define irqs_disabled() ((mfmsr() & MSR_EE) == 0) + +#define hard_irq_enable() local_irq_enable() +#define hard_irq_disable() local_irq_disable() + +static inline int irqs_disabled_flags(unsigned long flags) +{ + return (flags & MSR_EE) == 0; +} + +#endif /* CONFIG_PPC64 */ + +/* + * interrupt-retrigger: should we handle this via lost interrupts and IPIs + * or should we not care like we do now ? --BenH. + */ +struct hw_interrupt_type; + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_HW_IRQ_H */ diff --git a/arch/powerpc/include/asm/hydra.h b/arch/powerpc/include/asm/hydra.h new file mode 100644 index 00000000000..1ad4eed07fb --- /dev/null +++ b/arch/powerpc/include/asm/hydra.h @@ -0,0 +1,102 @@ +/* + * include/asm-ppc/hydra.h -- Mac I/O `Hydra' definitions + * + * Copyright (C) 1997 Geert Uytterhoeven + * + * This file is based on the following documentation: + * + * Macintosh Technology in the Common Hardware Reference Platform + * Apple Computer, Inc. + * + * © Copyright 1995 Apple Computer, Inc. All rights reserved. + * + * It's available online from http://chrp.apple.com/MacTech.pdf. + * You can obtain paper copies of this book from computer bookstores or by + * writing Morgan Kaufmann Publishers, Inc., 340 Pine Street, Sixth Floor, San + * Francisco, CA 94104. Reference ISBN 1-55860-393-X. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +#ifndef _ASMPPC_HYDRA_H +#define _ASMPPC_HYDRA_H + +#ifdef __KERNEL__ + +struct Hydra { + /* DBDMA Controller Register Space */ + char Pad1[0x30]; + u_int CachePD; + u_int IDs; + u_int Feature_Control; + char Pad2[0x7fc4]; + /* DBDMA Channel Register Space */ + char SCSI_DMA[0x100]; + char Pad3[0x300]; + char SCCA_Tx_DMA[0x100]; + char SCCA_Rx_DMA[0x100]; + char SCCB_Tx_DMA[0x100]; + char SCCB_Rx_DMA[0x100]; + char Pad4[0x7800]; + /* Device Register Space */ + char SCSI[0x1000]; + char ADB[0x1000]; + char SCC_Legacy[0x1000]; + char SCC[0x1000]; + char Pad9[0x2000]; + char VIA[0x2000]; + char Pad10[0x28000]; + char OpenPIC[0x40000]; +}; + +extern volatile struct Hydra __iomem *Hydra; + + + /* + * Feature Control Register + */ + +#define HYDRA_FC_SCC_CELL_EN 0x00000001 /* Enable SCC Clock */ +#define HYDRA_FC_SCSI_CELL_EN 0x00000002 /* Enable SCSI Clock */ +#define HYDRA_FC_SCCA_ENABLE 0x00000004 /* Enable SCC A Lines */ +#define HYDRA_FC_SCCB_ENABLE 0x00000008 /* Enable SCC B Lines */ +#define HYDRA_FC_ARB_BYPASS 0x00000010 /* Bypass Internal Arbiter */ +#define HYDRA_FC_RESET_SCC 0x00000020 /* Reset SCC */ +#define HYDRA_FC_MPIC_ENABLE 0x00000040 /* Enable OpenPIC */ +#define HYDRA_FC_SLOW_SCC_PCLK 0x00000080 /* 1=15.6672, 0=25 MHz */ +#define HYDRA_FC_MPIC_IS_MASTER 0x00000100 /* OpenPIC Master Mode */ + + + /* + * OpenPIC Interrupt Sources + */ + +#define HYDRA_INT_SIO 0 +#define HYDRA_INT_SCSI_DMA 1 +#define HYDRA_INT_SCCA_TX_DMA 2 +#define HYDRA_INT_SCCA_RX_DMA 3 +#define HYDRA_INT_SCCB_TX_DMA 4 +#define HYDRA_INT_SCCB_RX_DMA 5 +#define HYDRA_INT_SCSI 6 +#define HYDRA_INT_SCCA 7 +#define HYDRA_INT_SCCB 8 +#define HYDRA_INT_VIA 9 +#define HYDRA_INT_ADB 10 +#define HYDRA_INT_ADB_NMI 11 +#define HYDRA_INT_EXT1 12 /* PCI IRQW */ +#define HYDRA_INT_EXT2 13 /* PCI IRQX */ +#define HYDRA_INT_EXT3 14 /* PCI IRQY */ +#define HYDRA_INT_EXT4 15 /* PCI IRQZ */ +#define HYDRA_INT_EXT5 16 /* IDE Primay/Secondary */ +#define HYDRA_INT_EXT6 17 /* IDE Secondary */ +#define HYDRA_INT_EXT7 18 /* Power Off Request */ +#define HYDRA_INT_SPARE 19 + +extern int hydra_init(void); +extern void macio_adb_init(void); + +#endif /* __KERNEL__ */ + +#endif /* _ASMPPC_HYDRA_H */ diff --git a/arch/powerpc/include/asm/i8259.h b/arch/powerpc/include/asm/i8259.h new file mode 100644 index 00000000000..db1362f8c60 --- /dev/null +++ b/arch/powerpc/include/asm/i8259.h @@ -0,0 +1,17 @@ +#ifndef _ASM_POWERPC_I8259_H +#define _ASM_POWERPC_I8259_H +#ifdef __KERNEL__ + +#include + +#ifdef CONFIG_PPC_MERGE +extern void i8259_init(struct device_node *node, unsigned long intack_addr); +extern unsigned int i8259_irq(void); +extern struct irq_host *i8259_get_host(void); +#else +extern void i8259_init(unsigned long intack_addr, int offset); +extern int i8259_irq(void); +#endif + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_I8259_H */ diff --git a/arch/powerpc/include/asm/ibmebus.h b/arch/powerpc/include/asm/ibmebus.h new file mode 100644 index 00000000000..1a9d9aea21f --- /dev/null +++ b/arch/powerpc/include/asm/ibmebus.h @@ -0,0 +1,60 @@ +/* + * IBM PowerPC eBus Infrastructure Support. + * + * Copyright (c) 2005 IBM Corporation + * Joachim Fenkes + * Heiko J Schick + * + * All rights reserved. + * + * This source code is distributed under a dual license of GPL v2.0 and OpenIB + * BSD. + * + * OpenIB BSD License + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER + * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _ASM_EBUS_H +#define _ASM_EBUS_H +#ifdef __KERNEL__ + +#include +#include +#include +#include +#include + +extern struct bus_type ibmebus_bus_type; + +int ibmebus_register_driver(struct of_platform_driver *drv); +void ibmebus_unregister_driver(struct of_platform_driver *drv); + +int ibmebus_request_irq(u32 ist, irq_handler_t handler, + unsigned long irq_flags, const char *devname, + void *dev_id); +void ibmebus_free_irq(u32 ist, void *dev_id); + +#endif /* __KERNEL__ */ +#endif /* _ASM_IBMEBUS_H */ diff --git a/arch/powerpc/include/asm/ide.h b/arch/powerpc/include/asm/ide.h new file mode 100644 index 00000000000..1aaf27be874 --- /dev/null +++ b/arch/powerpc/include/asm/ide.h @@ -0,0 +1,59 @@ +/* + * Copyright (C) 1994-1996 Linus Torvalds & authors + * + * This file contains the powerpc architecture specific IDE code. + */ +#ifndef _ASM_POWERPC_IDE_H +#define _ASM_POWERPC_IDE_H + +#ifdef __KERNEL__ + +#ifndef __powerpc64__ +#include +#include +#endif +#include + +#define __ide_mm_insw(p, a, c) readsw((void __iomem *)(p), (a), (c)) +#define __ide_mm_insl(p, a, c) readsl((void __iomem *)(p), (a), (c)) +#define __ide_mm_outsw(p, a, c) writesw((void __iomem *)(p), (a), (c)) +#define __ide_mm_outsl(p, a, c) writesl((void __iomem *)(p), (a), (c)) + +#ifndef __powerpc64__ +#include +#include + +/* FIXME: use ide_platform host driver */ +static __inline__ int ide_default_irq(unsigned long base) +{ +#ifdef CONFIG_PPLUS + switch (base) { + case 0x1f0: return 14; + case 0x170: return 15; + } +#endif + return 0; +} + +/* FIXME: use ide_platform host driver */ +static __inline__ unsigned long ide_default_io_base(int index) +{ +#ifdef CONFIG_PPLUS + switch (index) { + case 0: return 0x1f0; + case 1: return 0x170; + } +#endif + return 0; +} + +#ifdef CONFIG_BLK_DEV_MPC8xx_IDE +#define IDE_ARCH_ACK_INTR 1 +#define ide_ack_intr(hwif) ((hwif)->ack_intr ? (hwif)->ack_intr(hwif) : 1) +#endif + +#endif /* __powerpc64__ */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_POWERPC_IDE_H */ diff --git a/arch/powerpc/include/asm/immap_86xx.h b/arch/powerpc/include/asm/immap_86xx.h new file mode 100644 index 00000000000..0f165e59c32 --- /dev/null +++ b/arch/powerpc/include/asm/immap_86xx.h @@ -0,0 +1,156 @@ +/** + * MPC86xx Internal Memory Map + * + * Authors: Jeff Brown + * Timur Tabi + * + * Copyright 2004,2007 Freescale Semiconductor, Inc + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This header file defines structures for various 86xx SOC devices that are + * used by multiple source files. + */ + +#ifndef __ASM_POWERPC_IMMAP_86XX_H__ +#define __ASM_POWERPC_IMMAP_86XX_H__ +#ifdef __KERNEL__ + +/* Global Utility Registers */ +struct ccsr_guts { + __be32 porpllsr; /* 0x.0000 - POR PLL Ratio Status Register */ + __be32 porbmsr; /* 0x.0004 - POR Boot Mode Status Register */ + __be32 porimpscr; /* 0x.0008 - POR I/O Impedance Status and Control Register */ + __be32 pordevsr; /* 0x.000c - POR I/O Device Status Register */ + __be32 pordbgmsr; /* 0x.0010 - POR Debug Mode Status Register */ + u8 res1[0x20 - 0x14]; + __be32 porcir; /* 0x.0020 - POR Configuration Information Register */ + u8 res2[0x30 - 0x24]; + __be32 gpiocr; /* 0x.0030 - GPIO Control Register */ + u8 res3[0x40 - 0x34]; + __be32 gpoutdr; /* 0x.0040 - General-Purpose Output Data Register */ + u8 res4[0x50 - 0x44]; + __be32 gpindr; /* 0x.0050 - General-Purpose Input Data Register */ + u8 res5[0x60 - 0x54]; + __be32 pmuxcr; /* 0x.0060 - Alternate Function Signal Multiplex Control */ + u8 res6[0x70 - 0x64]; + __be32 devdisr; /* 0x.0070 - Device Disable Control */ + __be32 devdisr2; /* 0x.0074 - Device Disable Control 2 */ + u8 res7[0x80 - 0x78]; + __be32 powmgtcsr; /* 0x.0080 - Power Management Status and Control Register */ + u8 res8[0x90 - 0x84]; + __be32 mcpsumr; /* 0x.0090 - Machine Check Summary Register */ + __be32 rstrscr; /* 0x.0094 - Reset Request Status and Control Register */ + u8 res9[0xA0 - 0x98]; + __be32 pvr; /* 0x.00a0 - Processor Version Register */ + __be32 svr; /* 0x.00a4 - System Version Register */ + u8 res10[0xB0 - 0xA8]; + __be32 rstcr; /* 0x.00b0 - Reset Control Register */ + u8 res11[0xC0 - 0xB4]; + __be32 elbcvselcr; /* 0x.00c0 - eLBC Voltage Select Ctrl Reg */ + u8 res12[0x800 - 0xC4]; + __be32 clkdvdr; /* 0x.0800 - Clock Divide Register */ + u8 res13[0x900 - 0x804]; + __be32 ircr; /* 0x.0900 - Infrared Control Register */ + u8 res14[0x908 - 0x904]; + __be32 dmacr; /* 0x.0908 - DMA Control Register */ + u8 res15[0x914 - 0x90C]; + __be32 elbccr; /* 0x.0914 - eLBC Control Register */ + u8 res16[0xB20 - 0x918]; + __be32 ddr1clkdr; /* 0x.0b20 - DDR1 Clock Disable Register */ + __be32 ddr2clkdr; /* 0x.0b24 - DDR2 Clock Disable Register */ + __be32 ddrclkdr; /* 0x.0b28 - DDR Clock Disable Register */ + u8 res17[0xE00 - 0xB2C]; + __be32 clkocr; /* 0x.0e00 - Clock Out Select Register */ + u8 res18[0xE10 - 0xE04]; + __be32 ddrdllcr; /* 0x.0e10 - DDR DLL Control Register */ + u8 res19[0xE20 - 0xE14]; + __be32 lbcdllcr; /* 0x.0e20 - LBC DLL Control Register */ + u8 res20[0xF04 - 0xE24]; + __be32 srds1cr0; /* 0x.0f04 - SerDes1 Control Register 0 */ + __be32 srds1cr1; /* 0x.0f08 - SerDes1 Control Register 0 */ + u8 res21[0xF40 - 0xF0C]; + __be32 srds2cr0; /* 0x.0f40 - SerDes1 Control Register 0 */ + __be32 srds2cr1; /* 0x.0f44 - SerDes1 Control Register 0 */ +} __attribute__ ((packed)); + +#define CCSR_GUTS_DMACR_DEV_SSI 0 /* DMA controller/channel set to SSI */ +#define CCSR_GUTS_DMACR_DEV_IR 1 /* DMA controller/channel set to IR */ + +/* + * Set the DMACR register in the GUTS + * + * The DMACR register determines the source of initiated transfers for each + * channel on each DMA controller. Rather than have a bunch of repetitive + * macros for the bit patterns, we just have a function that calculates + * them. + * + * guts: Pointer to GUTS structure + * co: The DMA controller (0 or 1) + * ch: The channel on the DMA controller (0, 1, 2, or 3) + * device: The device to set as the source (CCSR_GUTS_DMACR_DEV_xx) + */ +static inline void guts_set_dmacr(struct ccsr_guts __iomem *guts, + unsigned int co, unsigned int ch, unsigned int device) +{ + unsigned int shift = 16 + (8 * (1 - co) + 2 * (3 - ch)); + + clrsetbits_be32(&guts->dmacr, 3 << shift, device << shift); +} + +#define CCSR_GUTS_PMUXCR_LDPSEL 0x00010000 +#define CCSR_GUTS_PMUXCR_SSI1_MASK 0x0000C000 /* Bitmask for SSI1 */ +#define CCSR_GUTS_PMUXCR_SSI1_LA 0x00000000 /* Latched address */ +#define CCSR_GUTS_PMUXCR_SSI1_HI 0x00004000 /* High impedance */ +#define CCSR_GUTS_PMUXCR_SSI1_SSI 0x00008000 /* Used for SSI1 */ +#define CCSR_GUTS_PMUXCR_SSI2_MASK 0x00003000 /* Bitmask for SSI2 */ +#define CCSR_GUTS_PMUXCR_SSI2_LA 0x00000000 /* Latched address */ +#define CCSR_GUTS_PMUXCR_SSI2_HI 0x00001000 /* High impedance */ +#define CCSR_GUTS_PMUXCR_SSI2_SSI 0x00002000 /* Used for SSI2 */ +#define CCSR_GUTS_PMUXCR_LA_22_25_LA 0x00000000 /* Latched Address */ +#define CCSR_GUTS_PMUXCR_LA_22_25_HI 0x00000400 /* High impedance */ +#define CCSR_GUTS_PMUXCR_DBGDRV 0x00000200 /* Signals not driven */ +#define CCSR_GUTS_PMUXCR_DMA2_0 0x00000008 +#define CCSR_GUTS_PMUXCR_DMA2_3 0x00000004 +#define CCSR_GUTS_PMUXCR_DMA1_0 0x00000002 +#define CCSR_GUTS_PMUXCR_DMA1_3 0x00000001 + +/* + * Set the DMA external control bits in the GUTS + * + * The DMA external control bits in the PMUXCR are only meaningful for + * channels 0 and 3. Any other channels are ignored. + * + * guts: Pointer to GUTS structure + * co: The DMA controller (0 or 1) + * ch: The channel on the DMA controller (0, 1, 2, or 3) + * value: the new value for the bit (0 or 1) + */ +static inline void guts_set_pmuxcr_dma(struct ccsr_guts __iomem *guts, + unsigned int co, unsigned int ch, unsigned int value) +{ + if ((ch == 0) || (ch == 3)) { + unsigned int shift = 2 * (co + 1) - (ch & 1) - 1; + + clrsetbits_be32(&guts->pmuxcr, 1 << shift, value << shift); + } +} + +#define CCSR_GUTS_CLKDVDR_PXCKEN 0x80000000 +#define CCSR_GUTS_CLKDVDR_SSICKEN 0x20000000 +#define CCSR_GUTS_CLKDVDR_PXCKINV 0x10000000 +#define CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT 25 +#define CCSR_GUTS_CLKDVDR_PXCKDLY_MASK 0x06000000 +#define CCSR_GUTS_CLKDVDR_PXCKDLY(x) \ + (((x) & 3) << CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT) +#define CCSR_GUTS_CLKDVDR_PXCLK_SHIFT 16 +#define CCSR_GUTS_CLKDVDR_PXCLK_MASK 0x001F0000 +#define CCSR_GUTS_CLKDVDR_PXCLK(x) (((x) & 31) << CCSR_GUTS_CLKDVDR_PXCLK_SHIFT) +#define CCSR_GUTS_CLKDVDR_SSICLK_MASK 0x000000FF +#define CCSR_GUTS_CLKDVDR_SSICLK(x) ((x) & CCSR_GUTS_CLKDVDR_SSICLK_MASK) + +#endif /* __ASM_POWERPC_IMMAP_86XX_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/immap_cpm2.h b/arch/powerpc/include/asm/immap_cpm2.h new file mode 100644 index 00000000000..4080bab0468 --- /dev/null +++ b/arch/powerpc/include/asm/immap_cpm2.h @@ -0,0 +1,650 @@ +/* + * CPM2 Internal Memory Map + * Copyright (c) 1999 Dan Malek (dmalek@jlc.net) + * + * The Internal Memory Map for devices with CPM2 on them. This + * is the superset of all CPM2 devices (8260, 8266, 8280, 8272, + * 8560). + */ +#ifdef __KERNEL__ +#ifndef __IMMAP_CPM2__ +#define __IMMAP_CPM2__ + +#include + +/* System configuration registers. +*/ +typedef struct sys_82xx_conf { + u32 sc_siumcr; + u32 sc_sypcr; + u8 res1[6]; + u16 sc_swsr; + u8 res2[20]; + u32 sc_bcr; + u8 sc_ppc_acr; + u8 res3[3]; + u32 sc_ppc_alrh; + u32 sc_ppc_alrl; + u8 sc_lcl_acr; + u8 res4[3]; + u32 sc_lcl_alrh; + u32 sc_lcl_alrl; + u32 sc_tescr1; + u32 sc_tescr2; + u32 sc_ltescr1; + u32 sc_ltescr2; + u32 sc_pdtea; + u8 sc_pdtem; + u8 res5[3]; + u32 sc_ldtea; + u8 sc_ldtem; + u8 res6[163]; +} sysconf_82xx_cpm2_t; + +typedef struct sys_85xx_conf { + u32 sc_cear; + u16 sc_ceer; + u16 sc_cemr; + u8 res1[70]; + u32 sc_smaer; + u8 res2[4]; + u32 sc_smevr; + u32 sc_smctr; + u32 sc_lmaer; + u8 res3[4]; + u32 sc_lmevr; + u32 sc_lmctr; + u8 res4[144]; +} sysconf_85xx_cpm2_t; + +typedef union sys_conf { + sysconf_82xx_cpm2_t siu_82xx; + sysconf_85xx_cpm2_t siu_85xx; +} sysconf_cpm2_t; + + + +/* Memory controller registers. +*/ +typedef struct mem_ctlr { + u32 memc_br0; + u32 memc_or0; + u32 memc_br1; + u32 memc_or1; + u32 memc_br2; + u32 memc_or2; + u32 memc_br3; + u32 memc_or3; + u32 memc_br4; + u32 memc_or4; + u32 memc_br5; + u32 memc_or5; + u32 memc_br6; + u32 memc_or6; + u32 memc_br7; + u32 memc_or7; + u32 memc_br8; + u32 memc_or8; + u32 memc_br9; + u32 memc_or9; + u32 memc_br10; + u32 memc_or10; + u32 memc_br11; + u32 memc_or11; + u8 res1[8]; + u32 memc_mar; + u8 res2[4]; + u32 memc_mamr; + u32 memc_mbmr; + u32 memc_mcmr; + u8 res3[8]; + u16 memc_mptpr; + u8 res4[2]; + u32 memc_mdr; + u8 res5[4]; + u32 memc_psdmr; + u32 memc_lsdmr; + u8 memc_purt; + u8 res6[3]; + u8 memc_psrt; + u8 res7[3]; + u8 memc_lurt; + u8 res8[3]; + u8 memc_lsrt; + u8 res9[3]; + u32 memc_immr; + u32 memc_pcibr0; + u32 memc_pcibr1; + u8 res10[16]; + u32 memc_pcimsk0; + u32 memc_pcimsk1; + u8 res11[52]; +} memctl_cpm2_t; + +/* System Integration Timers. +*/ +typedef struct sys_int_timers { + u8 res1[32]; + u16 sit_tmcntsc; + u8 res2[2]; + u32 sit_tmcnt; + u8 res3[4]; + u32 sit_tmcntal; + u8 res4[16]; + u16 sit_piscr; + u8 res5[2]; + u32 sit_pitc; + u32 sit_pitr; + u8 res6[94]; + u8 res7[390]; +} sit_cpm2_t; + +#define PISCR_PIRQ_MASK ((u16)0xff00) +#define PISCR_PS ((u16)0x0080) +#define PISCR_PIE ((u16)0x0004) +#define PISCR_PTF ((u16)0x0002) +#define PISCR_PTE ((u16)0x0001) + +/* PCI Controller. +*/ +typedef struct pci_ctlr { + u32 pci_omisr; + u32 pci_omimr; + u8 res1[8]; + u32 pci_ifqpr; + u32 pci_ofqpr; + u8 res2[8]; + u32 pci_imr0; + u32 pci_imr1; + u32 pci_omr0; + u32 pci_omr1; + u32 pci_odr; + u8 res3[4]; + u32 pci_idr; + u8 res4[20]; + u32 pci_imisr; + u32 pci_imimr; + u8 res5[24]; + u32 pci_ifhpr; + u8 res6[4]; + u32 pci_iftpr; + u8 res7[4]; + u32 pci_iphpr; + u8 res8[4]; + u32 pci_iptpr; + u8 res9[4]; + u32 pci_ofhpr; + u8 res10[4]; + u32 pci_oftpr; + u8 res11[4]; + u32 pci_ophpr; + u8 res12[4]; + u32 pci_optpr; + u8 res13[8]; + u32 pci_mucr; + u8 res14[8]; + u32 pci_qbar; + u8 res15[12]; + u32 pci_dmamr0; + u32 pci_dmasr0; + u32 pci_dmacdar0; + u8 res16[4]; + u32 pci_dmasar0; + u8 res17[4]; + u32 pci_dmadar0; + u8 res18[4]; + u32 pci_dmabcr0; + u32 pci_dmandar0; + u8 res19[86]; + u32 pci_dmamr1; + u32 pci_dmasr1; + u32 pci_dmacdar1; + u8 res20[4]; + u32 pci_dmasar1; + u8 res21[4]; + u32 pci_dmadar1; + u8 res22[4]; + u32 pci_dmabcr1; + u32 pci_dmandar1; + u8 res23[88]; + u32 pci_dmamr2; + u32 pci_dmasr2; + u32 pci_dmacdar2; + u8 res24[4]; + u32 pci_dmasar2; + u8 res25[4]; + u32 pci_dmadar2; + u8 res26[4]; + u32 pci_dmabcr2; + u32 pci_dmandar2; + u8 res27[88]; + u32 pci_dmamr3; + u32 pci_dmasr3; + u32 pci_dmacdar3; + u8 res28[4]; + u32 pci_dmasar3; + u8 res29[4]; + u32 pci_dmadar3; + u8 res30[4]; + u32 pci_dmabcr3; + u32 pci_dmandar3; + u8 res31[344]; + u32 pci_potar0; + u8 res32[4]; + u32 pci_pobar0; + u8 res33[4]; + u32 pci_pocmr0; + u8 res34[4]; + u32 pci_potar1; + u8 res35[4]; + u32 pci_pobar1; + u8 res36[4]; + u32 pci_pocmr1; + u8 res37[4]; + u32 pci_potar2; + u8 res38[4]; + u32 pci_pobar2; + u8 res39[4]; + u32 pci_pocmr2; + u8 res40[50]; + u32 pci_ptcr; + u32 pci_gpcr; + u32 pci_gcr; + u32 pci_esr; + u32 pci_emr; + u32 pci_ecr; + u32 pci_eacr; + u8 res41[4]; + u32 pci_edcr; + u8 res42[4]; + u32 pci_eccr; + u8 res43[44]; + u32 pci_pitar1; + u8 res44[4]; + u32 pci_pibar1; + u8 res45[4]; + u32 pci_picmr1; + u8 res46[4]; + u32 pci_pitar0; + u8 res47[4]; + u32 pci_pibar0; + u8 res48[4]; + u32 pci_picmr0; + u8 res49[4]; + u32 pci_cfg_addr; + u32 pci_cfg_data; + u32 pci_int_ack; + u8 res50[756]; +} pci_cpm2_t; + +/* Interrupt Controller. +*/ +typedef struct interrupt_controller { + u16 ic_sicr; + u8 res1[2]; + u32 ic_sivec; + u32 ic_sipnrh; + u32 ic_sipnrl; + u32 ic_siprr; + u32 ic_scprrh; + u32 ic_scprrl; + u32 ic_simrh; + u32 ic_simrl; + u32 ic_siexr; + u8 res2[88]; +} intctl_cpm2_t; + +/* Clocks and Reset. +*/ +typedef struct clk_and_reset { + u32 car_sccr; + u8 res1[4]; + u32 car_scmr; + u8 res2[4]; + u32 car_rsr; + u32 car_rmr; + u8 res[104]; +} car_cpm2_t; + +/* Input/Output Port control/status registers. + * Names consistent with processor manual, although they are different + * from the original 8xx names....... + */ +typedef struct io_port { + u32 iop_pdira; + u32 iop_ppara; + u32 iop_psora; + u32 iop_podra; + u32 iop_pdata; + u8 res1[12]; + u32 iop_pdirb; + u32 iop_pparb; + u32 iop_psorb; + u32 iop_podrb; + u32 iop_pdatb; + u8 res2[12]; + u32 iop_pdirc; + u32 iop_pparc; + u32 iop_psorc; + u32 iop_podrc; + u32 iop_pdatc; + u8 res3[12]; + u32 iop_pdird; + u32 iop_ppard; + u32 iop_psord; + u32 iop_podrd; + u32 iop_pdatd; + u8 res4[12]; +} iop_cpm2_t; + +/* Communication Processor Module Timers +*/ +typedef struct cpm_timers { + u8 cpmt_tgcr1; + u8 res1[3]; + u8 cpmt_tgcr2; + u8 res2[11]; + u16 cpmt_tmr1; + u16 cpmt_tmr2; + u16 cpmt_trr1; + u16 cpmt_trr2; + u16 cpmt_tcr1; + u16 cpmt_tcr2; + u16 cpmt_tcn1; + u16 cpmt_tcn2; + u16 cpmt_tmr3; + u16 cpmt_tmr4; + u16 cpmt_trr3; + u16 cpmt_trr4; + u16 cpmt_tcr3; + u16 cpmt_tcr4; + u16 cpmt_tcn3; + u16 cpmt_tcn4; + u16 cpmt_ter1; + u16 cpmt_ter2; + u16 cpmt_ter3; + u16 cpmt_ter4; + u8 res3[584]; +} cpmtimer_cpm2_t; + +/* DMA control/status registers. +*/ +typedef struct sdma_csr { + u8 res0[24]; + u8 sdma_sdsr; + u8 res1[3]; + u8 sdma_sdmr; + u8 res2[3]; + u8 sdma_idsr1; + u8 res3[3]; + u8 sdma_idmr1; + u8 res4[3]; + u8 sdma_idsr2; + u8 res5[3]; + u8 sdma_idmr2; + u8 res6[3]; + u8 sdma_idsr3; + u8 res7[3]; + u8 sdma_idmr3; + u8 res8[3]; + u8 sdma_idsr4; + u8 res9[3]; + u8 sdma_idmr4; + u8 res10[707]; +} sdma_cpm2_t; + +/* Fast controllers +*/ +typedef struct fcc { + u32 fcc_gfmr; + u32 fcc_fpsmr; + u16 fcc_ftodr; + u8 res1[2]; + u16 fcc_fdsr; + u8 res2[2]; + u16 fcc_fcce; + u8 res3[2]; + u16 fcc_fccm; + u8 res4[2]; + u8 fcc_fccs; + u8 res5[3]; + u8 fcc_ftirr_phy[4]; +} fcc_t; + +/* Fast controllers continued + */ +typedef struct fcc_c { + u32 fcc_firper; + u32 fcc_firer; + u32 fcc_firsr_hi; + u32 fcc_firsr_lo; + u8 fcc_gfemr; + u8 res1[15]; +} fcc_c_t; + +/* TC Layer + */ +typedef struct tclayer { + u16 tc_tcmode; + u16 tc_cdsmr; + u16 tc_tcer; + u16 tc_rcc; + u16 tc_tcmr; + u16 tc_fcc; + u16 tc_ccc; + u16 tc_icc; + u16 tc_tcc; + u16 tc_ecc; + u8 res1[12]; +} tclayer_t; + + +/* I2C +*/ +typedef struct i2c { + u8 i2c_i2mod; + u8 res1[3]; + u8 i2c_i2add; + u8 res2[3]; + u8 i2c_i2brg; + u8 res3[3]; + u8 i2c_i2com; + u8 res4[3]; + u8 i2c_i2cer; + u8 res5[3]; + u8 i2c_i2cmr; + u8 res6[331]; +} i2c_cpm2_t; + +typedef struct scc { /* Serial communication channels */ + u32 scc_gsmrl; + u32 scc_gsmrh; + u16 scc_psmr; + u8 res1[2]; + u16 scc_todr; + u16 scc_dsr; + u16 scc_scce; + u8 res2[2]; + u16 scc_sccm; + u8 res3; + u8 scc_sccs; + u8 res4[8]; +} scc_t; + +typedef struct smc { /* Serial management channels */ + u8 res1[2]; + u16 smc_smcmr; + u8 res2[2]; + u8 smc_smce; + u8 res3[3]; + u8 smc_smcm; + u8 res4[5]; +} smc_t; + +/* Serial Peripheral Interface. +*/ +typedef struct spi_ctrl { + u16 spi_spmode; + u8 res1[4]; + u8 spi_spie; + u8 res2[3]; + u8 spi_spim; + u8 res3[2]; + u8 spi_spcom; + u8 res4[82]; +} spictl_cpm2_t; + +/* CPM Mux. +*/ +typedef struct cpmux { + u8 cmx_si1cr; + u8 res1; + u8 cmx_si2cr; + u8 res2; + u32 cmx_fcr; + u32 cmx_scr; + u8 cmx_smr; + u8 res3; + u16 cmx_uar; + u8 res4[16]; +} cpmux_t; + +/* SIRAM control +*/ +typedef struct siram { + u16 si_amr; + u16 si_bmr; + u16 si_cmr; + u16 si_dmr; + u8 si_gmr; + u8 res1; + u8 si_cmdr; + u8 res2; + u8 si_str; + u8 res3; + u16 si_rsr; +} siramctl_t; + +typedef struct mcc { + u16 mcc_mcce; + u8 res1[2]; + u16 mcc_mccm; + u8 res2[2]; + u8 mcc_mccf; + u8 res3[7]; +} mcc_t; + +typedef struct comm_proc { + u32 cp_cpcr; + u32 cp_rccr; + u8 res1[14]; + u16 cp_rter; + u8 res2[2]; + u16 cp_rtmr; + u16 cp_rtscr; + u8 res3[2]; + u32 cp_rtsr; + u8 res4[12]; +} cpm_cpm2_t; + +/* USB Controller. +*/ +typedef struct usb_ctlr { + u8 usb_usmod; + u8 usb_usadr; + u8 usb_uscom; + u8 res1[1]; + u16 usb_usep1; + u16 usb_usep2; + u16 usb_usep3; + u16 usb_usep4; + u8 res2[4]; + u16 usb_usber; + u8 res3[2]; + u16 usb_usbmr; + u8 usb_usbs; + u8 res4[7]; +} usb_cpm2_t; + +/* ...and the whole thing wrapped up.... +*/ + +typedef struct immap { + /* Some references are into the unique and known dpram spaces, + * others are from the generic base. + */ +#define im_dprambase im_dpram1 + u8 im_dpram1[16*1024]; + u8 res1[16*1024]; + u8 im_dpram2[4*1024]; + u8 res2[8*1024]; + u8 im_dpram3[4*1024]; + u8 res3[16*1024]; + + sysconf_cpm2_t im_siu_conf; /* SIU Configuration */ + memctl_cpm2_t im_memctl; /* Memory Controller */ + sit_cpm2_t im_sit; /* System Integration Timers */ + pci_cpm2_t im_pci; /* PCI Controller */ + intctl_cpm2_t im_intctl; /* Interrupt Controller */ + car_cpm2_t im_clkrst; /* Clocks and reset */ + iop_cpm2_t im_ioport; /* IO Port control/status */ + cpmtimer_cpm2_t im_cpmtimer; /* CPM timers */ + sdma_cpm2_t im_sdma; /* SDMA control/status */ + + fcc_t im_fcc[3]; /* Three FCCs */ + u8 res4z[32]; + fcc_c_t im_fcc_c[3]; /* Continued FCCs */ + + u8 res4[32]; + + tclayer_t im_tclayer[8]; /* Eight TCLayers */ + u16 tc_tcgsr; + u16 tc_tcger; + + /* First set of baud rate generators. + */ + u8 res[236]; + u32 im_brgc5; + u32 im_brgc6; + u32 im_brgc7; + u32 im_brgc8; + + u8 res5[608]; + + i2c_cpm2_t im_i2c; /* I2C control/status */ + cpm_cpm2_t im_cpm; /* Communication processor */ + + /* Second set of baud rate generators. + */ + u32 im_brgc1; + u32 im_brgc2; + u32 im_brgc3; + u32 im_brgc4; + + scc_t im_scc[4]; /* Four SCCs */ + smc_t im_smc[2]; /* Couple of SMCs */ + spictl_cpm2_t im_spi; /* A SPI */ + cpmux_t im_cpmux; /* CPM clock route mux */ + siramctl_t im_siramctl1; /* First SI RAM Control */ + mcc_t im_mcc1; /* First MCC */ + siramctl_t im_siramctl2; /* Second SI RAM Control */ + mcc_t im_mcc2; /* Second MCC */ + usb_cpm2_t im_usb; /* USB Controller */ + + u8 res6[1153]; + + u16 im_si1txram[256]; + u8 res7[512]; + u16 im_si1rxram[256]; + u8 res8[512]; + u16 im_si2txram[256]; + u8 res9[512]; + u16 im_si2rxram[256]; + u8 res10[512]; + u8 res11[4096]; +} cpm2_map_t; + +extern cpm2_map_t __iomem *cpm2_immr; + +#endif /* __IMMAP_CPM2__ */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/immap_qe.h b/arch/powerpc/include/asm/immap_qe.h new file mode 100644 index 00000000000..3c2fced3ac2 --- /dev/null +++ b/arch/powerpc/include/asm/immap_qe.h @@ -0,0 +1,483 @@ +/* + * QUICC Engine (QE) Internal Memory Map. + * The Internal Memory Map for devices with QE on them. This + * is the superset of all QE devices (8360, etc.). + + * Copyright (C) 2006. Freescale Semicondutor, Inc. All rights reserved. + * + * Authors: Shlomi Gridish + * Li Yang + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef _ASM_POWERPC_IMMAP_QE_H +#define _ASM_POWERPC_IMMAP_QE_H +#ifdef __KERNEL__ + +#include +#include + +#define QE_IMMAP_SIZE (1024 * 1024) /* 1MB from 1MB+IMMR */ + +/* QE I-RAM */ +struct qe_iram { + __be32 iadd; /* I-RAM Address Register */ + __be32 idata; /* I-RAM Data Register */ + u8 res0[0x78]; +} __attribute__ ((packed)); + +/* QE Interrupt Controller */ +struct qe_ic_regs { + __be32 qicr; + __be32 qivec; + __be32 qripnr; + __be32 qipnr; + __be32 qipxcc; + __be32 qipycc; + __be32 qipwcc; + __be32 qipzcc; + __be32 qimr; + __be32 qrimr; + __be32 qicnr; + u8 res0[0x4]; + __be32 qiprta; + __be32 qiprtb; + u8 res1[0x4]; + __be32 qricr; + u8 res2[0x20]; + __be32 qhivec; + u8 res3[0x1C]; +} __attribute__ ((packed)); + +/* Communications Processor */ +struct cp_qe { + __be32 cecr; /* QE command register */ + __be32 ceccr; /* QE controller configuration register */ + __be32 cecdr; /* QE command data register */ + u8 res0[0xA]; + __be16 ceter; /* QE timer event register */ + u8 res1[0x2]; + __be16 cetmr; /* QE timers mask register */ + __be32 cetscr; /* QE time-stamp timer control register */ + __be32 cetsr1; /* QE time-stamp register 1 */ + __be32 cetsr2; /* QE time-stamp register 2 */ + u8 res2[0x8]; + __be32 cevter; /* QE virtual tasks event register */ + __be32 cevtmr; /* QE virtual tasks mask register */ + __be16 cercr; /* QE RAM control register */ + u8 res3[0x2]; + u8 res4[0x24]; + __be16 ceexe1; /* QE external request 1 event register */ + u8 res5[0x2]; + __be16 ceexm1; /* QE external request 1 mask register */ + u8 res6[0x2]; + __be16 ceexe2; /* QE external request 2 event register */ + u8 res7[0x2]; + __be16 ceexm2; /* QE external request 2 mask register */ + u8 res8[0x2]; + __be16 ceexe3; /* QE external request 3 event register */ + u8 res9[0x2]; + __be16 ceexm3; /* QE external request 3 mask register */ + u8 res10[0x2]; + __be16 ceexe4; /* QE external request 4 event register */ + u8 res11[0x2]; + __be16 ceexm4; /* QE external request 4 mask register */ + u8 res12[0x3A]; + __be32 ceurnr; /* QE microcode revision number register */ + u8 res13[0x244]; +} __attribute__ ((packed)); + +/* QE Multiplexer */ +struct qe_mux { + __be32 cmxgcr; /* CMX general clock route register */ + __be32 cmxsi1cr_l; /* CMX SI1 clock route low register */ + __be32 cmxsi1cr_h; /* CMX SI1 clock route high register */ + __be32 cmxsi1syr; /* CMX SI1 SYNC route register */ + __be32 cmxucr[4]; /* CMX UCCx clock route registers */ + __be32 cmxupcr; /* CMX UPC clock route register */ + u8 res0[0x1C]; +} __attribute__ ((packed)); + +/* QE Timers */ +struct qe_timers { + u8 gtcfr1; /* Timer 1 and Timer 2 global config register*/ + u8 res0[0x3]; + u8 gtcfr2; /* Timer 3 and timer 4 global config register*/ + u8 res1[0xB]; + __be16 gtmdr1; /* Timer 1 mode register */ + __be16 gtmdr2; /* Timer 2 mode register */ + __be16 gtrfr1; /* Timer 1 reference register */ + __be16 gtrfr2; /* Timer 2 reference register */ + __be16 gtcpr1; /* Timer 1 capture register */ + __be16 gtcpr2; /* Timer 2 capture register */ + __be16 gtcnr1; /* Timer 1 counter */ + __be16 gtcnr2; /* Timer 2 counter */ + __be16 gtmdr3; /* Timer 3 mode register */ + __be16 gtmdr4; /* Timer 4 mode register */ + __be16 gtrfr3; /* Timer 3 reference register */ + __be16 gtrfr4; /* Timer 4 reference register */ + __be16 gtcpr3; /* Timer 3 capture register */ + __be16 gtcpr4; /* Timer 4 capture register */ + __be16 gtcnr3; /* Timer 3 counter */ + __be16 gtcnr4; /* Timer 4 counter */ + __be16 gtevr1; /* Timer 1 event register */ + __be16 gtevr2; /* Timer 2 event register */ + __be16 gtevr3; /* Timer 3 event register */ + __be16 gtevr4; /* Timer 4 event register */ + __be16 gtps; /* Timer 1 prescale register */ + u8 res2[0x46]; +} __attribute__ ((packed)); + +/* BRG */ +struct qe_brg { + __be32 brgc[16]; /* BRG configuration registers */ + u8 res0[0x40]; +} __attribute__ ((packed)); + +/* SPI */ +struct spi { + u8 res0[0x20]; + __be32 spmode; /* SPI mode register */ + u8 res1[0x2]; + u8 spie; /* SPI event register */ + u8 res2[0x1]; + u8 res3[0x2]; + u8 spim; /* SPI mask register */ + u8 res4[0x1]; + u8 res5[0x1]; + u8 spcom; /* SPI command register */ + u8 res6[0x2]; + __be32 spitd; /* SPI transmit data register (cpu mode) */ + __be32 spird; /* SPI receive data register (cpu mode) */ + u8 res7[0x8]; +} __attribute__ ((packed)); + +/* SI */ +struct si1 { + __be16 siamr1; /* SI1 TDMA mode register */ + __be16 sibmr1; /* SI1 TDMB mode register */ + __be16 sicmr1; /* SI1 TDMC mode register */ + __be16 sidmr1; /* SI1 TDMD mode register */ + u8 siglmr1_h; /* SI1 global mode register high */ + u8 res0[0x1]; + u8 sicmdr1_h; /* SI1 command register high */ + u8 res2[0x1]; + u8 sistr1_h; /* SI1 status register high */ + u8 res3[0x1]; + __be16 sirsr1_h; /* SI1 RAM shadow address register high */ + u8 sitarc1; /* SI1 RAM counter Tx TDMA */ + u8 sitbrc1; /* SI1 RAM counter Tx TDMB */ + u8 sitcrc1; /* SI1 RAM counter Tx TDMC */ + u8 sitdrc1; /* SI1 RAM counter Tx TDMD */ + u8 sirarc1; /* SI1 RAM counter Rx TDMA */ + u8 sirbrc1; /* SI1 RAM counter Rx TDMB */ + u8 sircrc1; /* SI1 RAM counter Rx TDMC */ + u8 sirdrc1; /* SI1 RAM counter Rx TDMD */ + u8 res4[0x8]; + __be16 siemr1; /* SI1 TDME mode register 16 bits */ + __be16 sifmr1; /* SI1 TDMF mode register 16 bits */ + __be16 sigmr1; /* SI1 TDMG mode register 16 bits */ + __be16 sihmr1; /* SI1 TDMH mode register 16 bits */ + u8 siglmg1_l; /* SI1 global mode register low 8 bits */ + u8 res5[0x1]; + u8 sicmdr1_l; /* SI1 command register low 8 bits */ + u8 res6[0x1]; + u8 sistr1_l; /* SI1 status register low 8 bits */ + u8 res7[0x1]; + __be16 sirsr1_l; /* SI1 RAM shadow address register low 16 bits*/ + u8 siterc1; /* SI1 RAM counter Tx TDME 8 bits */ + u8 sitfrc1; /* SI1 RAM counter Tx TDMF 8 bits */ + u8 sitgrc1; /* SI1 RAM counter Tx TDMG 8 bits */ + u8 sithrc1; /* SI1 RAM counter Tx TDMH 8 bits */ + u8 sirerc1; /* SI1 RAM counter Rx TDME 8 bits */ + u8 sirfrc1; /* SI1 RAM counter Rx TDMF 8 bits */ + u8 sirgrc1; /* SI1 RAM counter Rx TDMG 8 bits */ + u8 sirhrc1; /* SI1 RAM counter Rx TDMH 8 bits */ + u8 res8[0x8]; + __be32 siml1; /* SI1 multiframe limit register */ + u8 siedm1; /* SI1 extended diagnostic mode register */ + u8 res9[0xBB]; +} __attribute__ ((packed)); + +/* SI Routing Tables */ +struct sir { + u8 tx[0x400]; + u8 rx[0x400]; + u8 res0[0x800]; +} __attribute__ ((packed)); + +/* USB Controller */ +struct usb_ctlr { + u8 usb_usmod; + u8 usb_usadr; + u8 usb_uscom; + u8 res1[1]; + __be16 usb_usep1; + __be16 usb_usep2; + __be16 usb_usep3; + __be16 usb_usep4; + u8 res2[4]; + __be16 usb_usber; + u8 res3[2]; + __be16 usb_usbmr; + u8 res4[1]; + u8 usb_usbs; + __be16 usb_ussft; + u8 res5[2]; + __be16 usb_usfrn; + u8 res6[0x22]; +} __attribute__ ((packed)); + +/* MCC */ +struct mcc { + __be32 mcce; /* MCC event register */ + __be32 mccm; /* MCC mask register */ + __be32 mccf; /* MCC configuration register */ + __be32 merl; /* MCC emergency request level register */ + u8 res0[0xF0]; +} __attribute__ ((packed)); + +/* QE UCC Slow */ +struct ucc_slow { + __be32 gumr_l; /* UCCx general mode register (low) */ + __be32 gumr_h; /* UCCx general mode register (high) */ + __be16 upsmr; /* UCCx protocol-specific mode register */ + u8 res0[0x2]; + __be16 utodr; /* UCCx transmit on demand register */ + __be16 udsr; /* UCCx data synchronization register */ + __be16 ucce; /* UCCx event register */ + u8 res1[0x2]; + __be16 uccm; /* UCCx mask register */ + u8 res2[0x1]; + u8 uccs; /* UCCx status register */ + u8 res3[0x24]; + __be16 utpt; + u8 res4[0x52]; + u8 guemr; /* UCC general extended mode register */ +} __attribute__ ((packed)); + +/* QE UCC Fast */ +struct ucc_fast { + __be32 gumr; /* UCCx general mode register */ + __be32 upsmr; /* UCCx protocol-specific mode register */ + __be16 utodr; /* UCCx transmit on demand register */ + u8 res0[0x2]; + __be16 udsr; /* UCCx data synchronization register */ + u8 res1[0x2]; + __be32 ucce; /* UCCx event register */ + __be32 uccm; /* UCCx mask register */ + u8 uccs; /* UCCx status register */ + u8 res2[0x7]; + __be32 urfb; /* UCC receive FIFO base */ + __be16 urfs; /* UCC receive FIFO size */ + u8 res3[0x2]; + __be16 urfet; /* UCC receive FIFO emergency threshold */ + __be16 urfset; /* UCC receive FIFO special emergency + threshold */ + __be32 utfb; /* UCC transmit FIFO base */ + __be16 utfs; /* UCC transmit FIFO size */ + u8 res4[0x2]; + __be16 utfet; /* UCC transmit FIFO emergency threshold */ + u8 res5[0x2]; + __be16 utftt; /* UCC transmit FIFO transmit threshold */ + u8 res6[0x2]; + __be16 utpt; /* UCC transmit polling timer */ + u8 res7[0x2]; + __be32 urtry; /* UCC retry counter register */ + u8 res8[0x4C]; + u8 guemr; /* UCC general extended mode register */ +} __attribute__ ((packed)); + +struct ucc { + union { + struct ucc_slow slow; + struct ucc_fast fast; + u8 res[0x200]; /* UCC blocks are 512 bytes each */ + }; +} __attribute__ ((packed)); + +/* MultiPHY UTOPIA POS Controllers (UPC) */ +struct upc { + __be32 upgcr; /* UTOPIA/POS general configuration register */ + __be32 uplpa; /* UTOPIA/POS last PHY address */ + __be32 uphec; /* ATM HEC register */ + __be32 upuc; /* UTOPIA/POS UCC configuration */ + __be32 updc1; /* UTOPIA/POS device 1 configuration */ + __be32 updc2; /* UTOPIA/POS device 2 configuration */ + __be32 updc3; /* UTOPIA/POS device 3 configuration */ + __be32 updc4; /* UTOPIA/POS device 4 configuration */ + __be32 upstpa; /* UTOPIA/POS STPA threshold */ + u8 res0[0xC]; + __be32 updrs1_h; /* UTOPIA/POS device 1 rate select */ + __be32 updrs1_l; /* UTOPIA/POS device 1 rate select */ + __be32 updrs2_h; /* UTOPIA/POS device 2 rate select */ + __be32 updrs2_l; /* UTOPIA/POS device 2 rate select */ + __be32 updrs3_h; /* UTOPIA/POS device 3 rate select */ + __be32 updrs3_l; /* UTOPIA/POS device 3 rate select */ + __be32 updrs4_h; /* UTOPIA/POS device 4 rate select */ + __be32 updrs4_l; /* UTOPIA/POS device 4 rate select */ + __be32 updrp1; /* UTOPIA/POS device 1 receive priority low */ + __be32 updrp2; /* UTOPIA/POS device 2 receive priority low */ + __be32 updrp3; /* UTOPIA/POS device 3 receive priority low */ + __be32 updrp4; /* UTOPIA/POS device 4 receive priority low */ + __be32 upde1; /* UTOPIA/POS device 1 event */ + __be32 upde2; /* UTOPIA/POS device 2 event */ + __be32 upde3; /* UTOPIA/POS device 3 event */ + __be32 upde4; /* UTOPIA/POS device 4 event */ + __be16 uprp1; + __be16 uprp2; + __be16 uprp3; + __be16 uprp4; + u8 res1[0x8]; + __be16 uptirr1_0; /* Device 1 transmit internal rate 0 */ + __be16 uptirr1_1; /* Device 1 transmit internal rate 1 */ + __be16 uptirr1_2; /* Device 1 transmit internal rate 2 */ + __be16 uptirr1_3; /* Device 1 transmit internal rate 3 */ + __be16 uptirr2_0; /* Device 2 transmit internal rate 0 */ + __be16 uptirr2_1; /* Device 2 transmit internal rate 1 */ + __be16 uptirr2_2; /* Device 2 transmit internal rate 2 */ + __be16 uptirr2_3; /* Device 2 transmit internal rate 3 */ + __be16 uptirr3_0; /* Device 3 transmit internal rate 0 */ + __be16 uptirr3_1; /* Device 3 transmit internal rate 1 */ + __be16 uptirr3_2; /* Device 3 transmit internal rate 2 */ + __be16 uptirr3_3; /* Device 3 transmit internal rate 3 */ + __be16 uptirr4_0; /* Device 4 transmit internal rate 0 */ + __be16 uptirr4_1; /* Device 4 transmit internal rate 1 */ + __be16 uptirr4_2; /* Device 4 transmit internal rate 2 */ + __be16 uptirr4_3; /* Device 4 transmit internal rate 3 */ + __be32 uper1; /* Device 1 port enable register */ + __be32 uper2; /* Device 2 port enable register */ + __be32 uper3; /* Device 3 port enable register */ + __be32 uper4; /* Device 4 port enable register */ + u8 res2[0x150]; +} __attribute__ ((packed)); + +/* SDMA */ +struct sdma { + __be32 sdsr; /* Serial DMA status register */ + __be32 sdmr; /* Serial DMA mode register */ + __be32 sdtr1; /* SDMA system bus threshold register */ + __be32 sdtr2; /* SDMA secondary bus threshold register */ + __be32 sdhy1; /* SDMA system bus hysteresis register */ + __be32 sdhy2; /* SDMA secondary bus hysteresis register */ + __be32 sdta1; /* SDMA system bus address register */ + __be32 sdta2; /* SDMA secondary bus address register */ + __be32 sdtm1; /* SDMA system bus MSNUM register */ + __be32 sdtm2; /* SDMA secondary bus MSNUM register */ + u8 res0[0x10]; + __be32 sdaqr; /* SDMA address bus qualify register */ + __be32 sdaqmr; /* SDMA address bus qualify mask register */ + u8 res1[0x4]; + __be32 sdebcr; /* SDMA CAM entries base register */ + u8 res2[0x38]; +} __attribute__ ((packed)); + +/* Debug Space */ +struct dbg { + __be32 bpdcr; /* Breakpoint debug command register */ + __be32 bpdsr; /* Breakpoint debug status register */ + __be32 bpdmr; /* Breakpoint debug mask register */ + __be32 bprmrr0; /* Breakpoint request mode risc register 0 */ + __be32 bprmrr1; /* Breakpoint request mode risc register 1 */ + u8 res0[0x8]; + __be32 bprmtr0; /* Breakpoint request mode trb register 0 */ + __be32 bprmtr1; /* Breakpoint request mode trb register 1 */ + u8 res1[0x8]; + __be32 bprmir; /* Breakpoint request mode immediate register */ + __be32 bprmsr; /* Breakpoint request mode serial register */ + __be32 bpemr; /* Breakpoint exit mode register */ + u8 res2[0x48]; +} __attribute__ ((packed)); + +/* + * RISC Special Registers (Trap and Breakpoint). These are described in + * the QE Developer's Handbook. + */ +struct rsp { + __be32 tibcr[16]; /* Trap/instruction breakpoint control regs */ + u8 res0[64]; + __be32 ibcr0; + __be32 ibs0; + __be32 ibcnr0; + u8 res1[4]; + __be32 ibcr1; + __be32 ibs1; + __be32 ibcnr1; + __be32 npcr; + __be32 dbcr; + __be32 dbar; + __be32 dbamr; + __be32 dbsr; + __be32 dbcnr; + u8 res2[12]; + __be32 dbdr_h; + __be32 dbdr_l; + __be32 dbdmr_h; + __be32 dbdmr_l; + __be32 bsr; + __be32 bor; + __be32 bior; + u8 res3[4]; + __be32 iatr[4]; + __be32 eccr; /* Exception control configuration register */ + __be32 eicr; + u8 res4[0x100-0xf8]; +} __attribute__ ((packed)); + +struct qe_immap { + struct qe_iram iram; /* I-RAM */ + struct qe_ic_regs ic; /* Interrupt Controller */ + struct cp_qe cp; /* Communications Processor */ + struct qe_mux qmx; /* QE Multiplexer */ + struct qe_timers qet; /* QE Timers */ + struct spi spi[0x2]; /* spi */ + struct mcc mcc; /* mcc */ + struct qe_brg brg; /* brg */ + struct usb_ctlr usb; /* USB */ + struct si1 si1; /* SI */ + u8 res11[0x800]; + struct sir sir; /* SI Routing Tables */ + struct ucc ucc1; /* ucc1 */ + struct ucc ucc3; /* ucc3 */ + struct ucc ucc5; /* ucc5 */ + struct ucc ucc7; /* ucc7 */ + u8 res12[0x600]; + struct upc upc1; /* MultiPHY UTOPIA POS Ctrlr 1*/ + struct ucc ucc2; /* ucc2 */ + struct ucc ucc4; /* ucc4 */ + struct ucc ucc6; /* ucc6 */ + struct ucc ucc8; /* ucc8 */ + u8 res13[0x600]; + struct upc upc2; /* MultiPHY UTOPIA POS Ctrlr 2*/ + struct sdma sdma; /* SDMA */ + struct dbg dbg; /* 0x104080 - 0x1040FF + Debug Space */ + struct rsp rsp[0x2]; /* 0x104100 - 0x1042FF + RISC Special Registers + (Trap and Breakpoint) */ + u8 res14[0x300]; /* 0x104300 - 0x1045FF */ + u8 res15[0x3A00]; /* 0x104600 - 0x107FFF */ + u8 res16[0x8000]; /* 0x108000 - 0x110000 */ + u8 muram[0xC000]; /* 0x110000 - 0x11C000 + Multi-user RAM */ + u8 res17[0x24000]; /* 0x11C000 - 0x140000 */ + u8 res18[0xC0000]; /* 0x140000 - 0x200000 */ +} __attribute__ ((packed)); + +extern struct qe_immap __iomem *qe_immr; +extern phys_addr_t get_qe_base(void); + +static inline unsigned long immrbar_virt_to_phys(void *address) +{ + if ( ((u32)address >= (u32)qe_immr) && + ((u32)address < ((u32)qe_immr + QE_IMMAP_SIZE)) ) + return (unsigned long)(address - (u32)qe_immr + + (u32)get_qe_base()); + return (unsigned long)virt_to_phys(address); +} + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_IMMAP_QE_H */ diff --git a/arch/powerpc/include/asm/io-defs.h b/arch/powerpc/include/asm/io-defs.h new file mode 100644 index 00000000000..44d7927aec6 --- /dev/null +++ b/arch/powerpc/include/asm/io-defs.h @@ -0,0 +1,60 @@ +/* This file is meant to be include multiple times by other headers */ +/* last 2 argments are used by platforms/cell/io-workarounds.[ch] */ + +DEF_PCI_AC_RET(readb, u8, (const PCI_IO_ADDR addr), (addr), mem, addr) +DEF_PCI_AC_RET(readw, u16, (const PCI_IO_ADDR addr), (addr), mem, addr) +DEF_PCI_AC_RET(readl, u32, (const PCI_IO_ADDR addr), (addr), mem, addr) +DEF_PCI_AC_RET(readw_be, u16, (const PCI_IO_ADDR addr), (addr), mem, addr) +DEF_PCI_AC_RET(readl_be, u32, (const PCI_IO_ADDR addr), (addr), mem, addr) +DEF_PCI_AC_NORET(writeb, (u8 val, PCI_IO_ADDR addr), (val, addr), mem, addr) +DEF_PCI_AC_NORET(writew, (u16 val, PCI_IO_ADDR addr), (val, addr), mem, addr) +DEF_PCI_AC_NORET(writel, (u32 val, PCI_IO_ADDR addr), (val, addr), mem, addr) +DEF_PCI_AC_NORET(writew_be, (u16 val, PCI_IO_ADDR addr), (val, addr), mem, addr) +DEF_PCI_AC_NORET(writel_be, (u32 val, PCI_IO_ADDR addr), (val, addr), mem, addr) + +#ifdef __powerpc64__ +DEF_PCI_AC_RET(readq, u64, (const PCI_IO_ADDR addr), (addr), mem, addr) +DEF_PCI_AC_RET(readq_be, u64, (const PCI_IO_ADDR addr), (addr), mem, addr) +DEF_PCI_AC_NORET(writeq, (u64 val, PCI_IO_ADDR addr), (val, addr), mem, addr) +DEF_PCI_AC_NORET(writeq_be, (u64 val, PCI_IO_ADDR addr), (val, addr), mem, addr) +#endif /* __powerpc64__ */ + +DEF_PCI_AC_RET(inb, u8, (unsigned long port), (port), pio, port) +DEF_PCI_AC_RET(inw, u16, (unsigned long port), (port), pio, port) +DEF_PCI_AC_RET(inl, u32, (unsigned long port), (port), pio, port) +DEF_PCI_AC_NORET(outb, (u8 val, unsigned long port), (val, port), pio, port) +DEF_PCI_AC_NORET(outw, (u16 val, unsigned long port), (val, port), pio, port) +DEF_PCI_AC_NORET(outl, (u32 val, unsigned long port), (val, port), pio, port) + +DEF_PCI_AC_NORET(readsb, (const PCI_IO_ADDR a, void *b, unsigned long c), + (a, b, c), mem, a) +DEF_PCI_AC_NORET(readsw, (const PCI_IO_ADDR a, void *b, unsigned long c), + (a, b, c), mem, a) +DEF_PCI_AC_NORET(readsl, (const PCI_IO_ADDR a, void *b, unsigned long c), + (a, b, c), mem, a) +DEF_PCI_AC_NORET(writesb, (PCI_IO_ADDR a, const void *b, unsigned long c), + (a, b, c), mem, a) +DEF_PCI_AC_NORET(writesw, (PCI_IO_ADDR a, const void *b, unsigned long c), + (a, b, c), mem, a) +DEF_PCI_AC_NORET(writesl, (PCI_IO_ADDR a, const void *b, unsigned long c), + (a, b, c), mem, a) + +DEF_PCI_AC_NORET(insb, (unsigned long p, void *b, unsigned long c), + (p, b, c), pio, p) +DEF_PCI_AC_NORET(insw, (unsigned long p, void *b, unsigned long c), + (p, b, c), pio, p) +DEF_PCI_AC_NORET(insl, (unsigned long p, void *b, unsigned long c), + (p, b, c), pio, p) +DEF_PCI_AC_NORET(outsb, (unsigned long p, const void *b, unsigned long c), + (p, b, c), pio, p) +DEF_PCI_AC_NORET(outsw, (unsigned long p, const void *b, unsigned long c), + (p, b, c), pio, p) +DEF_PCI_AC_NORET(outsl, (unsigned long p, const void *b, unsigned long c), + (p, b, c), pio, p) + +DEF_PCI_AC_NORET(memset_io, (PCI_IO_ADDR a, int c, unsigned long n), + (a, c, n), mem, a) +DEF_PCI_AC_NORET(memcpy_fromio, (void *d, const PCI_IO_ADDR s, unsigned long n), + (d, s, n), mem, s) +DEF_PCI_AC_NORET(memcpy_toio, (PCI_IO_ADDR d, const void *s, unsigned long n), + (d, s, n), mem, d) diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h new file mode 100644 index 00000000000..77c7fa025e6 --- /dev/null +++ b/arch/powerpc/include/asm/io.h @@ -0,0 +1,787 @@ +#ifndef _ASM_POWERPC_IO_H +#define _ASM_POWERPC_IO_H +#ifdef __KERNEL__ + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/* Check of existence of legacy devices */ +extern int check_legacy_ioport(unsigned long base_port); +#define I8042_DATA_REG 0x60 +#define FDC_BASE 0x3f0 +/* only relevant for PReP */ +#define _PIDXR 0x279 +#define _PNPWRP 0xa79 +#define PNPBIOS_BASE 0xf000 + +#include +#include + +#include +#include +#include +#include +#include +#include + +#include + +#ifdef CONFIG_PPC64 +#include +#endif + +#define SIO_CONFIG_RA 0x398 +#define SIO_CONFIG_RD 0x399 + +#define SLOW_DOWN_IO + +/* 32 bits uses slightly different variables for the various IO + * bases. Most of this file only uses _IO_BASE though which we + * define properly based on the platform + */ +#ifndef CONFIG_PCI +#define _IO_BASE 0 +#define _ISA_MEM_BASE 0 +#define PCI_DRAM_OFFSET 0 +#elif defined(CONFIG_PPC32) +#define _IO_BASE isa_io_base +#define _ISA_MEM_BASE isa_mem_base +#define PCI_DRAM_OFFSET pci_dram_offset +#else +#define _IO_BASE pci_io_base +#define _ISA_MEM_BASE isa_mem_base +#define PCI_DRAM_OFFSET 0 +#endif + +extern unsigned long isa_io_base; +extern unsigned long pci_io_base; +extern unsigned long pci_dram_offset; + +extern resource_size_t isa_mem_base; + +#if defined(CONFIG_PPC32) && defined(CONFIG_PPC_INDIRECT_IO) +#error CONFIG_PPC_INDIRECT_IO is not yet supported on 32 bits +#endif + +/* + * + * Low level MMIO accessors + * + * This provides the non-bus specific accessors to MMIO. Those are PowerPC + * specific and thus shouldn't be used in generic code. The accessors + * provided here are: + * + * in_8, in_le16, in_be16, in_le32, in_be32, in_le64, in_be64 + * out_8, out_le16, out_be16, out_le32, out_be32, out_le64, out_be64 + * _insb, _insw_ns, _insl_ns, _outsb, _outsw_ns, _outsl_ns + * + * Those operate directly on a kernel virtual address. Note that the prototype + * for the out_* accessors has the arguments in opposite order from the usual + * linux PCI accessors. Unlike those, they take the address first and the value + * next. + * + * Note: I might drop the _ns suffix on the stream operations soon as it is + * simply normal for stream operations to not swap in the first place. + * + */ + +#ifdef CONFIG_PPC64 +#define IO_SET_SYNC_FLAG() do { local_paca->io_sync = 1; } while(0) +#else +#define IO_SET_SYNC_FLAG() +#endif + +/* gcc 4.0 and older doesn't have 'Z' constraint */ +#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ == 0) +#define DEF_MMIO_IN_LE(name, size, insn) \ +static inline u##size name(const volatile u##size __iomem *addr) \ +{ \ + u##size ret; \ + __asm__ __volatile__("sync;"#insn" %0,0,%1;twi 0,%0,0;isync" \ + : "=r" (ret) : "r" (addr), "m" (*addr) : "memory"); \ + return ret; \ +} + +#define DEF_MMIO_OUT_LE(name, size, insn) \ +static inline void name(volatile u##size __iomem *addr, u##size val) \ +{ \ + __asm__ __volatile__("sync;"#insn" %1,0,%2" \ + : "=m" (*addr) : "r" (val), "r" (addr) : "memory"); \ + IO_SET_SYNC_FLAG(); \ +} +#else /* newer gcc */ +#define DEF_MMIO_IN_LE(name, size, insn) \ +static inline u##size name(const volatile u##size __iomem *addr) \ +{ \ + u##size ret; \ + __asm__ __volatile__("sync;"#insn" %0,%y1;twi 0,%0,0;isync" \ + : "=r" (ret) : "Z" (*addr) : "memory"); \ + return ret; \ +} + +#define DEF_MMIO_OUT_LE(name, size, insn) \ +static inline void name(volatile u##size __iomem *addr, u##size val) \ +{ \ + __asm__ __volatile__("sync;"#insn" %1,%y0" \ + : "=Z" (*addr) : "r" (val) : "memory"); \ + IO_SET_SYNC_FLAG(); \ +} +#endif + +#define DEF_MMIO_IN_BE(name, size, insn) \ +static inline u##size name(const volatile u##size __iomem *addr) \ +{ \ + u##size ret; \ + __asm__ __volatile__("sync;"#insn"%U1%X1 %0,%1;twi 0,%0,0;isync"\ + : "=r" (ret) : "m" (*addr) : "memory"); \ + return ret; \ +} + +#define DEF_MMIO_OUT_BE(name, size, insn) \ +static inline void name(volatile u##size __iomem *addr, u##size val) \ +{ \ + __asm__ __volatile__("sync;"#insn"%U0%X0 %1,%0" \ + : "=m" (*addr) : "r" (val) : "memory"); \ + IO_SET_SYNC_FLAG(); \ +} + + +DEF_MMIO_IN_BE(in_8, 8, lbz); +DEF_MMIO_IN_BE(in_be16, 16, lhz); +DEF_MMIO_IN_BE(in_be32, 32, lwz); +DEF_MMIO_IN_LE(in_le16, 16, lhbrx); +DEF_MMIO_IN_LE(in_le32, 32, lwbrx); + +DEF_MMIO_OUT_BE(out_8, 8, stb); +DEF_MMIO_OUT_BE(out_be16, 16, sth); +DEF_MMIO_OUT_BE(out_be32, 32, stw); +DEF_MMIO_OUT_LE(out_le16, 16, sthbrx); +DEF_MMIO_OUT_LE(out_le32, 32, stwbrx); + +#ifdef __powerpc64__ +DEF_MMIO_OUT_BE(out_be64, 64, std); +DEF_MMIO_IN_BE(in_be64, 64, ld); + +/* There is no asm instructions for 64 bits reverse loads and stores */ +static inline u64 in_le64(const volatile u64 __iomem *addr) +{ + return swab64(in_be64(addr)); +} + +static inline void out_le64(volatile u64 __iomem *addr, u64 val) +{ + out_be64(addr, swab64(val)); +} +#endif /* __powerpc64__ */ + +/* + * Low level IO stream instructions are defined out of line for now + */ +extern void _insb(const volatile u8 __iomem *addr, void *buf, long count); +extern void _outsb(volatile u8 __iomem *addr,const void *buf,long count); +extern void _insw_ns(const volatile u16 __iomem *addr, void *buf, long count); +extern void _outsw_ns(volatile u16 __iomem *addr, const void *buf, long count); +extern void _insl_ns(const volatile u32 __iomem *addr, void *buf, long count); +extern void _outsl_ns(volatile u32 __iomem *addr, const void *buf, long count); + +/* The _ns naming is historical and will be removed. For now, just #define + * the non _ns equivalent names + */ +#define _insw _insw_ns +#define _insl _insl_ns +#define _outsw _outsw_ns +#define _outsl _outsl_ns + + +/* + * memset_io, memcpy_toio, memcpy_fromio base implementations are out of line + */ + +extern void _memset_io(volatile void __iomem *addr, int c, unsigned long n); +extern void _memcpy_fromio(void *dest, const volatile void __iomem *src, + unsigned long n); +extern void _memcpy_toio(volatile void __iomem *dest, const void *src, + unsigned long n); + +/* + * + * PCI and standard ISA accessors + * + * Those are globally defined linux accessors for devices on PCI or ISA + * busses. They follow the Linux defined semantics. The current implementation + * for PowerPC is as close as possible to the x86 version of these, and thus + * provides fairly heavy weight barriers for the non-raw versions + * + * In addition, they support a hook mechanism when CONFIG_PPC_INDIRECT_IO + * allowing the platform to provide its own implementation of some or all + * of the accessors. + */ + +/* + * Include the EEH definitions when EEH is enabled only so they don't get + * in the way when building for 32 bits + */ +#ifdef CONFIG_EEH +#include +#endif + +/* Shortcut to the MMIO argument pointer */ +#define PCI_IO_ADDR volatile void __iomem * + +/* Indirect IO address tokens: + * + * When CONFIG_PPC_INDIRECT_IO is set, the platform can provide hooks + * on all IOs. (Note that this is all 64 bits only for now) + * + * To help platforms who may need to differenciate MMIO addresses in + * their hooks, a bitfield is reserved for use by the platform near the + * top of MMIO addresses (not PIO, those have to cope the hard way). + * + * This bit field is 12 bits and is at the top of the IO virtual + * addresses PCI_IO_INDIRECT_TOKEN_MASK. + * + * The kernel virtual space is thus: + * + * 0xD000000000000000 : vmalloc + * 0xD000080000000000 : PCI PHB IO space + * 0xD000080080000000 : ioremap + * 0xD0000fffffffffff : end of ioremap region + * + * Since the top 4 bits are reserved as the region ID, we use thus + * the next 12 bits and keep 4 bits available for the future if the + * virtual address space is ever to be extended. + * + * The direct IO mapping operations will then mask off those bits + * before doing the actual access, though that only happen when + * CONFIG_PPC_INDIRECT_IO is set, thus be careful when you use that + * mechanism + */ + +#ifdef CONFIG_PPC_INDIRECT_IO +#define PCI_IO_IND_TOKEN_MASK 0x0fff000000000000ul +#define PCI_IO_IND_TOKEN_SHIFT 48 +#define PCI_FIX_ADDR(addr) \ + ((PCI_IO_ADDR)(((unsigned long)(addr)) & ~PCI_IO_IND_TOKEN_MASK)) +#define PCI_GET_ADDR_TOKEN(addr) \ + (((unsigned long)(addr) & PCI_IO_IND_TOKEN_MASK) >> \ + PCI_IO_IND_TOKEN_SHIFT) +#define PCI_SET_ADDR_TOKEN(addr, token) \ +do { \ + unsigned long __a = (unsigned long)(addr); \ + __a &= ~PCI_IO_IND_TOKEN_MASK; \ + __a |= ((unsigned long)(token)) << PCI_IO_IND_TOKEN_SHIFT; \ + (addr) = (void __iomem *)__a; \ +} while(0) +#else +#define PCI_FIX_ADDR(addr) (addr) +#endif + + +/* + * Non ordered and non-swapping "raw" accessors + */ + +static inline unsigned char __raw_readb(const volatile void __iomem *addr) +{ + return *(volatile unsigned char __force *)PCI_FIX_ADDR(addr); +} +static inline unsigned short __raw_readw(const volatile void __iomem *addr) +{ + return *(volatile unsigned short __force *)PCI_FIX_ADDR(addr); +} +static inline unsigned int __raw_readl(const volatile void __iomem *addr) +{ + return *(volatile unsigned int __force *)PCI_FIX_ADDR(addr); +} +static inline void __raw_writeb(unsigned char v, volatile void __iomem *addr) +{ + *(volatile unsigned char __force *)PCI_FIX_ADDR(addr) = v; +} +static inline void __raw_writew(unsigned short v, volatile void __iomem *addr) +{ + *(volatile unsigned short __force *)PCI_FIX_ADDR(addr) = v; +} +static inline void __raw_writel(unsigned int v, volatile void __iomem *addr) +{ + *(volatile unsigned int __force *)PCI_FIX_ADDR(addr) = v; +} + +#ifdef __powerpc64__ +static inline unsigned long __raw_readq(const volatile void __iomem *addr) +{ + return *(volatile unsigned long __force *)PCI_FIX_ADDR(addr); +} +static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr) +{ + *(volatile unsigned long __force *)PCI_FIX_ADDR(addr) = v; +} +#endif /* __powerpc64__ */ + +/* + * + * PCI PIO and MMIO accessors. + * + * + * On 32 bits, PIO operations have a recovery mechanism in case they trigger + * machine checks (which they occasionally do when probing non existing + * IO ports on some platforms, like PowerMac and 8xx). + * I always found it to be of dubious reliability and I am tempted to get + * rid of it one of these days. So if you think it's important to keep it, + * please voice up asap. We never had it for 64 bits and I do not intend + * to port it over + */ + +#ifdef CONFIG_PPC32 + +#define __do_in_asm(name, op) \ +static inline unsigned int name(unsigned int port) \ +{ \ + unsigned int x; \ + __asm__ __volatile__( \ + "sync\n" \ + "0:" op " %0,0,%1\n" \ + "1: twi 0,%0,0\n" \ + "2: isync\n" \ + "3: nop\n" \ + "4:\n" \ + ".section .fixup,\"ax\"\n" \ + "5: li %0,-1\n" \ + " b 4b\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + " .align 2\n" \ + " .long 0b,5b\n" \ + " .long 1b,5b\n" \ + " .long 2b,5b\n" \ + " .long 3b,5b\n" \ + ".previous" \ + : "=&r" (x) \ + : "r" (port + _IO_BASE) \ + : "memory"); \ + return x; \ +} + +#define __do_out_asm(name, op) \ +static inline void name(unsigned int val, unsigned int port) \ +{ \ + __asm__ __volatile__( \ + "sync\n" \ + "0:" op " %0,0,%1\n" \ + "1: sync\n" \ + "2:\n" \ + ".section __ex_table,\"a\"\n" \ + " .align 2\n" \ + " .long 0b,2b\n" \ + " .long 1b,2b\n" \ + ".previous" \ + : : "r" (val), "r" (port + _IO_BASE) \ + : "memory"); \ +} + +__do_in_asm(_rec_inb, "lbzx") +__do_in_asm(_rec_inw, "lhbrx") +__do_in_asm(_rec_inl, "lwbrx") +__do_out_asm(_rec_outb, "stbx") +__do_out_asm(_rec_outw, "sthbrx") +__do_out_asm(_rec_outl, "stwbrx") + +#endif /* CONFIG_PPC32 */ + +/* The "__do_*" operations below provide the actual "base" implementation + * for each of the defined acccessor. Some of them use the out_* functions + * directly, some of them still use EEH, though we might change that in the + * future. Those macros below provide the necessary argument swapping and + * handling of the IO base for PIO. + * + * They are themselves used by the macros that define the actual accessors + * and can be used by the hooks if any. + * + * Note that PIO operations are always defined in terms of their corresonding + * MMIO operations. That allows platforms like iSeries who want to modify the + * behaviour of both to only hook on the MMIO version and get both. It's also + * possible to hook directly at the toplevel PIO operation if they have to + * be handled differently + */ +#define __do_writeb(val, addr) out_8(PCI_FIX_ADDR(addr), val) +#define __do_writew(val, addr) out_le16(PCI_FIX_ADDR(addr), val) +#define __do_writel(val, addr) out_le32(PCI_FIX_ADDR(addr), val) +#define __do_writeq(val, addr) out_le64(PCI_FIX_ADDR(addr), val) +#define __do_writew_be(val, addr) out_be16(PCI_FIX_ADDR(addr), val) +#define __do_writel_be(val, addr) out_be32(PCI_FIX_ADDR(addr), val) +#define __do_writeq_be(val, addr) out_be64(PCI_FIX_ADDR(addr), val) + +#ifdef CONFIG_EEH +#define __do_readb(addr) eeh_readb(PCI_FIX_ADDR(addr)) +#define __do_readw(addr) eeh_readw(PCI_FIX_ADDR(addr)) +#define __do_readl(addr) eeh_readl(PCI_FIX_ADDR(addr)) +#define __do_readq(addr) eeh_readq(PCI_FIX_ADDR(addr)) +#define __do_readw_be(addr) eeh_readw_be(PCI_FIX_ADDR(addr)) +#define __do_readl_be(addr) eeh_readl_be(PCI_FIX_ADDR(addr)) +#define __do_readq_be(addr) eeh_readq_be(PCI_FIX_ADDR(addr)) +#else /* CONFIG_EEH */ +#define __do_readb(addr) in_8(PCI_FIX_ADDR(addr)) +#define __do_readw(addr) in_le16(PCI_FIX_ADDR(addr)) +#define __do_readl(addr) in_le32(PCI_FIX_ADDR(addr)) +#define __do_readq(addr) in_le64(PCI_FIX_ADDR(addr)) +#define __do_readw_be(addr) in_be16(PCI_FIX_ADDR(addr)) +#define __do_readl_be(addr) in_be32(PCI_FIX_ADDR(addr)) +#define __do_readq_be(addr) in_be64(PCI_FIX_ADDR(addr)) +#endif /* !defined(CONFIG_EEH) */ + +#ifdef CONFIG_PPC32 +#define __do_outb(val, port) _rec_outb(val, port) +#define __do_outw(val, port) _rec_outw(val, port) +#define __do_outl(val, port) _rec_outl(val, port) +#define __do_inb(port) _rec_inb(port) +#define __do_inw(port) _rec_inw(port) +#define __do_inl(port) _rec_inl(port) +#else /* CONFIG_PPC32 */ +#define __do_outb(val, port) writeb(val,(PCI_IO_ADDR)_IO_BASE+port); +#define __do_outw(val, port) writew(val,(PCI_IO_ADDR)_IO_BASE+port); +#define __do_outl(val, port) writel(val,(PCI_IO_ADDR)_IO_BASE+port); +#define __do_inb(port) readb((PCI_IO_ADDR)_IO_BASE + port); +#define __do_inw(port) readw((PCI_IO_ADDR)_IO_BASE + port); +#define __do_inl(port) readl((PCI_IO_ADDR)_IO_BASE + port); +#endif /* !CONFIG_PPC32 */ + +#ifdef CONFIG_EEH +#define __do_readsb(a, b, n) eeh_readsb(PCI_FIX_ADDR(a), (b), (n)) +#define __do_readsw(a, b, n) eeh_readsw(PCI_FIX_ADDR(a), (b), (n)) +#define __do_readsl(a, b, n) eeh_readsl(PCI_FIX_ADDR(a), (b), (n)) +#else /* CONFIG_EEH */ +#define __do_readsb(a, b, n) _insb(PCI_FIX_ADDR(a), (b), (n)) +#define __do_readsw(a, b, n) _insw(PCI_FIX_ADDR(a), (b), (n)) +#define __do_readsl(a, b, n) _insl(PCI_FIX_ADDR(a), (b), (n)) +#endif /* !CONFIG_EEH */ +#define __do_writesb(a, b, n) _outsb(PCI_FIX_ADDR(a),(b),(n)) +#define __do_writesw(a, b, n) _outsw(PCI_FIX_ADDR(a),(b),(n)) +#define __do_writesl(a, b, n) _outsl(PCI_FIX_ADDR(a),(b),(n)) + +#define __do_insb(p, b, n) readsb((PCI_IO_ADDR)_IO_BASE+(p), (b), (n)) +#define __do_insw(p, b, n) readsw((PCI_IO_ADDR)_IO_BASE+(p), (b), (n)) +#define __do_insl(p, b, n) readsl((PCI_IO_ADDR)_IO_BASE+(p), (b), (n)) +#define __do_outsb(p, b, n) writesb((PCI_IO_ADDR)_IO_BASE+(p),(b),(n)) +#define __do_outsw(p, b, n) writesw((PCI_IO_ADDR)_IO_BASE+(p),(b),(n)) +#define __do_outsl(p, b, n) writesl((PCI_IO_ADDR)_IO_BASE+(p),(b),(n)) + +#define __do_memset_io(addr, c, n) \ + _memset_io(PCI_FIX_ADDR(addr), c, n) +#define __do_memcpy_toio(dst, src, n) \ + _memcpy_toio(PCI_FIX_ADDR(dst), src, n) + +#ifdef CONFIG_EEH +#define __do_memcpy_fromio(dst, src, n) \ + eeh_memcpy_fromio(dst, PCI_FIX_ADDR(src), n) +#else /* CONFIG_EEH */ +#define __do_memcpy_fromio(dst, src, n) \ + _memcpy_fromio(dst,PCI_FIX_ADDR(src),n) +#endif /* !CONFIG_EEH */ + +#ifdef CONFIG_PPC_INDIRECT_IO +#define DEF_PCI_HOOK(x) x +#else +#define DEF_PCI_HOOK(x) NULL +#endif + +/* Structure containing all the hooks */ +extern struct ppc_pci_io { + +#define DEF_PCI_AC_RET(name, ret, at, al, space, aa) ret (*name) at; +#define DEF_PCI_AC_NORET(name, at, al, space, aa) void (*name) at; + +#include + +#undef DEF_PCI_AC_RET +#undef DEF_PCI_AC_NORET + +} ppc_pci_io; + +/* The inline wrappers */ +#define DEF_PCI_AC_RET(name, ret, at, al, space, aa) \ +static inline ret name at \ +{ \ + if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL) \ + return ppc_pci_io.name al; \ + return __do_##name al; \ +} + +#define DEF_PCI_AC_NORET(name, at, al, space, aa) \ +static inline void name at \ +{ \ + if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL) \ + ppc_pci_io.name al; \ + else \ + __do_##name al; \ +} + +#include + +#undef DEF_PCI_AC_RET +#undef DEF_PCI_AC_NORET + +/* Some drivers check for the presence of readq & writeq with + * a #ifdef, so we make them happy here. + */ +#ifdef __powerpc64__ +#define readq readq +#define writeq writeq +#endif + +/* + * Convert a physical pointer to a virtual kernel pointer for /dev/mem + * access + */ +#define xlate_dev_mem_ptr(p) __va(p) + +/* + * Convert a virtual cached pointer to an uncached pointer + */ +#define xlate_dev_kmem_ptr(p) p + +/* + * We don't do relaxed operations yet, at least not with this semantic + */ +#define readb_relaxed(addr) readb(addr) +#define readw_relaxed(addr) readw(addr) +#define readl_relaxed(addr) readl(addr) +#define readq_relaxed(addr) readq(addr) + +#ifdef CONFIG_PPC32 +#define mmiowb() +#else +/* + * Enforce synchronisation of stores vs. spin_unlock + * (this does it explicitly, though our implementation of spin_unlock + * does it implicitely too) + */ +static inline void mmiowb(void) +{ + unsigned long tmp; + + __asm__ __volatile__("sync; li %0,0; stb %0,%1(13)" + : "=&r" (tmp) : "i" (offsetof(struct paca_struct, io_sync)) + : "memory"); +} +#endif /* !CONFIG_PPC32 */ + +static inline void iosync(void) +{ + __asm__ __volatile__ ("sync" : : : "memory"); +} + +/* Enforce in-order execution of data I/O. + * No distinction between read/write on PPC; use eieio for all three. + * Those are fairly week though. They don't provide a barrier between + * MMIO and cacheable storage nor do they provide a barrier vs. locks, + * they only provide barriers between 2 __raw MMIO operations and + * possibly break write combining. + */ +#define iobarrier_rw() eieio() +#define iobarrier_r() eieio() +#define iobarrier_w() eieio() + + +/* + * output pause versions need a delay at least for the + * w83c105 ide controller in a p610. + */ +#define inb_p(port) inb(port) +#define outb_p(val, port) (udelay(1), outb((val), (port))) +#define inw_p(port) inw(port) +#define outw_p(val, port) (udelay(1), outw((val), (port))) +#define inl_p(port) inl(port) +#define outl_p(val, port) (udelay(1), outl((val), (port))) + + +#define IO_SPACE_LIMIT ~(0UL) + + +/** + * ioremap - map bus memory into CPU space + * @address: bus address of the memory + * @size: size of the resource to map + * + * ioremap performs a platform specific sequence of operations to + * make bus memory CPU accessible via the readb/readw/readl/writeb/ + * writew/writel functions and the other mmio helpers. The returned + * address is not guaranteed to be usable directly as a virtual + * address. + * + * We provide a few variations of it: + * + * * ioremap is the standard one and provides non-cacheable guarded mappings + * and can be hooked by the platform via ppc_md + * + * * ioremap_flags allows to specify the page flags as an argument and can + * also be hooked by the platform via ppc_md. ioremap_prot is the exact + * same thing as ioremap_flags. + * + * * ioremap_nocache is identical to ioremap + * + * * iounmap undoes such a mapping and can be hooked + * + * * __ioremap_at (and the pending __iounmap_at) are low level functions to + * create hand-made mappings for use only by the PCI code and cannot + * currently be hooked. Must be page aligned. + * + * * __ioremap is the low level implementation used by ioremap and + * ioremap_flags and cannot be hooked (but can be used by a hook on one + * of the previous ones) + * + * * __iounmap, is the low level implementation used by iounmap and cannot + * be hooked (but can be used by a hook on iounmap) + * + */ +extern void __iomem *ioremap(phys_addr_t address, unsigned long size); +extern void __iomem *ioremap_flags(phys_addr_t address, unsigned long size, + unsigned long flags); +#define ioremap_nocache(addr, size) ioremap((addr), (size)) +#define ioremap_prot(addr, size, prot) ioremap_flags((addr), (size), (prot)) + +extern void iounmap(volatile void __iomem *addr); + +extern void __iomem *__ioremap(phys_addr_t, unsigned long size, + unsigned long flags); +extern void __iounmap(volatile void __iomem *addr); + +extern void __iomem * __ioremap_at(phys_addr_t pa, void *ea, + unsigned long size, unsigned long flags); +extern void __iounmap_at(void *ea, unsigned long size); + +/* + * When CONFIG_PPC_INDIRECT_IO is set, we use the generic iomap implementation + * which needs some additional definitions here. They basically allow PIO + * space overall to be 1GB. This will work as long as we never try to use + * iomap to map MMIO below 1GB which should be fine on ppc64 + */ +#define HAVE_ARCH_PIO_SIZE 1 +#define PIO_OFFSET 0x00000000UL +#define PIO_MASK (FULL_IO_SIZE - 1) +#define PIO_RESERVED (FULL_IO_SIZE) + +#define mmio_read16be(addr) readw_be(addr) +#define mmio_read32be(addr) readl_be(addr) +#define mmio_write16be(val, addr) writew_be(val, addr) +#define mmio_write32be(val, addr) writel_be(val, addr) +#define mmio_insb(addr, dst, count) readsb(addr, dst, count) +#define mmio_insw(addr, dst, count) readsw(addr, dst, count) +#define mmio_insl(addr, dst, count) readsl(addr, dst, count) +#define mmio_outsb(addr, src, count) writesb(addr, src, count) +#define mmio_outsw(addr, src, count) writesw(addr, src, count) +#define mmio_outsl(addr, src, count) writesl(addr, src, count) + +/** + * virt_to_phys - map virtual addresses to physical + * @address: address to remap + * + * The returned physical address is the physical (CPU) mapping for + * the memory address given. It is only valid to use this function on + * addresses directly mapped or allocated via kmalloc. + * + * This function does not give bus mappings for DMA transfers. In + * almost all conceivable cases a device driver should not be using + * this function + */ +static inline unsigned long virt_to_phys(volatile void * address) +{ + return __pa((unsigned long)address); +} + +/** + * phys_to_virt - map physical address to virtual + * @address: address to remap + * + * The returned virtual address is a current CPU mapping for + * the memory address given. It is only valid to use this function on + * addresses that have a kernel mapping + * + * This function does not handle bus mappings for DMA transfers. In + * almost all conceivable cases a device driver should not be using + * this function + */ +static inline void * phys_to_virt(unsigned long address) +{ + return (void *)__va(address); +} + +/* + * Change "struct page" to physical address. + */ +#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) + +/* We do NOT want virtual merging, it would put too much pressure on + * our iommu allocator. Instead, we want drivers to be smart enough + * to coalesce sglists that happen to have been mapped in a contiguous + * way by the iommu + */ +#define BIO_VMERGE_BOUNDARY 0 + +/* + * 32 bits still uses virt_to_bus() for it's implementation of DMA + * mappings se we have to keep it defined here. We also have some old + * drivers (shame shame shame) that use bus_to_virt() and haven't been + * fixed yet so I need to define it here. + */ +#ifdef CONFIG_PPC32 + +static inline unsigned long virt_to_bus(volatile void * address) +{ + if (address == NULL) + return 0; + return __pa(address) + PCI_DRAM_OFFSET; +} + +static inline void * bus_to_virt(unsigned long address) +{ + if (address == 0) + return NULL; + return __va(address - PCI_DRAM_OFFSET); +} + +#define page_to_bus(page) (page_to_phys(page) + PCI_DRAM_OFFSET) + +#endif /* CONFIG_PPC32 */ + +/* access ports */ +#define setbits32(_addr, _v) out_be32((_addr), in_be32(_addr) | (_v)) +#define clrbits32(_addr, _v) out_be32((_addr), in_be32(_addr) & ~(_v)) + +#define setbits16(_addr, _v) out_be16((_addr), in_be16(_addr) | (_v)) +#define clrbits16(_addr, _v) out_be16((_addr), in_be16(_addr) & ~(_v)) + +#define setbits8(_addr, _v) out_8((_addr), in_8(_addr) | (_v)) +#define clrbits8(_addr, _v) out_8((_addr), in_8(_addr) & ~(_v)) + +/* Clear and set bits in one shot. These macros can be used to clear and + * set multiple bits in a register using a single read-modify-write. These + * macros can also be used to set a multiple-bit bit pattern using a mask, + * by specifying the mask in the 'clear' parameter and the new bit pattern + * in the 'set' parameter. + */ + +#define clrsetbits(type, addr, clear, set) \ + out_##type((addr), (in_##type(addr) & ~(clear)) | (set)) + +#ifdef __powerpc64__ +#define clrsetbits_be64(addr, clear, set) clrsetbits(be64, addr, clear, set) +#define clrsetbits_le64(addr, clear, set) clrsetbits(le64, addr, clear, set) +#endif + +#define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set) +#define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set) + +#define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set) +#define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set) + +#define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set) + +void __iomem *devm_ioremap_prot(struct device *dev, resource_size_t offset, + size_t size, unsigned long flags); + +#endif /* __KERNEL__ */ + +#endif /* _ASM_POWERPC_IO_H */ diff --git a/arch/powerpc/include/asm/ioctl.h b/arch/powerpc/include/asm/ioctl.h new file mode 100644 index 00000000000..57d68304218 --- /dev/null +++ b/arch/powerpc/include/asm/ioctl.h @@ -0,0 +1,13 @@ +#ifndef _ASM_POWERPC_IOCTL_H +#define _ASM_POWERPC_IOCTL_H + +#define _IOC_SIZEBITS 13 +#define _IOC_DIRBITS 3 + +#define _IOC_NONE 1U +#define _IOC_READ 2U +#define _IOC_WRITE 4U + +#include + +#endif /* _ASM_POWERPC_IOCTL_H */ diff --git a/arch/powerpc/include/asm/ioctls.h b/arch/powerpc/include/asm/ioctls.h new file mode 100644 index 00000000000..279a6229584 --- /dev/null +++ b/arch/powerpc/include/asm/ioctls.h @@ -0,0 +1,110 @@ +#ifndef _ASM_POWERPC_IOCTLS_H +#define _ASM_POWERPC_IOCTLS_H + +#include + +#define FIOCLEX _IO('f', 1) +#define FIONCLEX _IO('f', 2) +#define FIOASYNC _IOW('f', 125, int) +#define FIONBIO _IOW('f', 126, int) +#define FIONREAD _IOR('f', 127, int) +#define TIOCINQ FIONREAD +#define FIOQSIZE _IOR('f', 128, loff_t) + +#define TIOCGETP _IOR('t', 8, struct sgttyb) +#define TIOCSETP _IOW('t', 9, struct sgttyb) +#define TIOCSETN _IOW('t', 10, struct sgttyb) /* TIOCSETP wo flush */ + +#define TIOCSETC _IOW('t', 17, struct tchars) +#define TIOCGETC _IOR('t', 18, struct tchars) +#define TCGETS _IOR('t', 19, struct termios) +#define TCSETS _IOW('t', 20, struct termios) +#define TCSETSW _IOW('t', 21, struct termios) +#define TCSETSF _IOW('t', 22, struct termios) + +#define TCGETA _IOR('t', 23, struct termio) +#define TCSETA _IOW('t', 24, struct termio) +#define TCSETAW _IOW('t', 25, struct termio) +#define TCSETAF _IOW('t', 28, struct termio) + +#define TCSBRK _IO('t', 29) +#define TCXONC _IO('t', 30) +#define TCFLSH _IO('t', 31) + +#define TIOCSWINSZ _IOW('t', 103, struct winsize) +#define TIOCGWINSZ _IOR('t', 104, struct winsize) +#define TIOCSTART _IO('t', 110) /* start output, like ^Q */ +#define TIOCSTOP _IO('t', 111) /* stop output, like ^S */ +#define TIOCOUTQ _IOR('t', 115, int) /* output queue size */ + +#define TIOCGLTC _IOR('t', 116, struct ltchars) +#define TIOCSLTC _IOW('t', 117, struct ltchars) +#define TIOCSPGRP _IOW('t', 118, int) +#define TIOCGPGRP _IOR('t', 119, int) + +#define TIOCEXCL 0x540C +#define TIOCNXCL 0x540D +#define TIOCSCTTY 0x540E + +#define TIOCSTI 0x5412 +#define TIOCMGET 0x5415 +#define TIOCMBIS 0x5416 +#define TIOCMBIC 0x5417 +#define TIOCMSET 0x5418 +# define TIOCM_LE 0x001 +# define TIOCM_DTR 0x002 +# define TIOCM_RTS 0x004 +# define TIOCM_ST 0x008 +# define TIOCM_SR 0x010 +# define TIOCM_CTS 0x020 +# define TIOCM_CAR 0x040 +# define TIOCM_RNG 0x080 +# define TIOCM_DSR 0x100 +# define TIOCM_CD TIOCM_CAR +# define TIOCM_RI TIOCM_RNG +#define TIOCM_OUT1 0x2000 +#define TIOCM_OUT2 0x4000 +#define TIOCM_LOOP 0x8000 + +#define TIOCGSOFTCAR 0x5419 +#define TIOCSSOFTCAR 0x541A +#define TIOCLINUX 0x541C +#define TIOCCONS 0x541D +#define TIOCGSERIAL 0x541E +#define TIOCSSERIAL 0x541F +#define TIOCPKT 0x5420 +# define TIOCPKT_DATA 0 +# define TIOCPKT_FLUSHREAD 1 +# define TIOCPKT_FLUSHWRITE 2 +# define TIOCPKT_STOP 4 +# define TIOCPKT_START 8 +# define TIOCPKT_NOSTOP 16 +# define TIOCPKT_DOSTOP 32 + + +#define TIOCNOTTY 0x5422 +#define TIOCSETD 0x5423 +#define TIOCGETD 0x5424 +#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ +#define TIOCSBRK 0x5427 /* BSD compatibility */ +#define TIOCCBRK 0x5428 /* BSD compatibility */ +#define TIOCGSID 0x5429 /* Return the session ID of FD */ +#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ +#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ + +#define TIOCSERCONFIG 0x5453 +#define TIOCSERGWILD 0x5454 +#define TIOCSERSWILD 0x5455 +#define TIOCGLCKTRMIOS 0x5456 +#define TIOCSLCKTRMIOS 0x5457 +#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ +#define TIOCSERGETLSR 0x5459 /* Get line status register */ + /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ +# define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ +#define TIOCSERGETMULTI 0x545A /* Get multiport config */ +#define TIOCSERSETMULTI 0x545B /* Set multiport config */ + +#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ +#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ + +#endif /* _ASM_POWERPC_IOCTLS_H */ diff --git a/arch/powerpc/include/asm/iommu.h b/arch/powerpc/include/asm/iommu.h new file mode 100644 index 00000000000..51ecfef8d84 --- /dev/null +++ b/arch/powerpc/include/asm/iommu.h @@ -0,0 +1,131 @@ +/* + * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation + * Rewrite, cleanup: + * Copyright (C) 2004 Olof Johansson , IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ASM_IOMMU_H +#define _ASM_IOMMU_H +#ifdef __KERNEL__ + +#include +#include +#include +#include +#include +#include +#include + +#define IOMMU_PAGE_SHIFT 12 +#define IOMMU_PAGE_SIZE (ASM_CONST(1) << IOMMU_PAGE_SHIFT) +#define IOMMU_PAGE_MASK (~((1 << IOMMU_PAGE_SHIFT) - 1)) +#define IOMMU_PAGE_ALIGN(addr) _ALIGN_UP(addr, IOMMU_PAGE_SIZE) + +/* Boot time flags */ +extern int iommu_is_off; +extern int iommu_force_on; + +/* Pure 2^n version of get_order */ +static __inline__ __attribute_const__ int get_iommu_order(unsigned long size) +{ + return __ilog2((size - 1) >> IOMMU_PAGE_SHIFT) + 1; +} + + +/* + * IOMAP_MAX_ORDER defines the largest contiguous block + * of dma space we can get. IOMAP_MAX_ORDER = 13 + * allows up to 2**12 pages (4096 * 4096) = 16 MB + */ +#define IOMAP_MAX_ORDER 13 + +struct iommu_table { + unsigned long it_busno; /* Bus number this table belongs to */ + unsigned long it_size; /* Size of iommu table in entries */ + unsigned long it_offset; /* Offset into global table */ + unsigned long it_base; /* mapped address of tce table */ + unsigned long it_index; /* which iommu table this is */ + unsigned long it_type; /* type: PCI or Virtual Bus */ + unsigned long it_blocksize; /* Entries in each block (cacheline) */ + unsigned long it_hint; /* Hint for next alloc */ + unsigned long it_largehint; /* Hint for large allocs */ + unsigned long it_halfpoint; /* Breaking point for small/large allocs */ + spinlock_t it_lock; /* Protects it_map */ + unsigned long *it_map; /* A simple allocation bitmap for now */ +}; + +struct scatterlist; + +/* Frees table for an individual device node */ +extern void iommu_free_table(struct iommu_table *tbl, const char *node_name); + +/* Initializes an iommu_table based in values set in the passed-in + * structure + */ +extern struct iommu_table *iommu_init_table(struct iommu_table * tbl, + int nid); + +extern int iommu_map_sg(struct device *dev, struct iommu_table *tbl, + struct scatterlist *sglist, int nelems, + unsigned long mask, enum dma_data_direction direction, + struct dma_attrs *attrs); +extern void iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist, + int nelems, enum dma_data_direction direction, + struct dma_attrs *attrs); + +extern void *iommu_alloc_coherent(struct device *dev, struct iommu_table *tbl, + size_t size, dma_addr_t *dma_handle, + unsigned long mask, gfp_t flag, int node); +extern void iommu_free_coherent(struct iommu_table *tbl, size_t size, + void *vaddr, dma_addr_t dma_handle); +extern dma_addr_t iommu_map_single(struct device *dev, struct iommu_table *tbl, + void *vaddr, size_t size, unsigned long mask, + enum dma_data_direction direction, + struct dma_attrs *attrs); +extern void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle, + size_t size, enum dma_data_direction direction, + struct dma_attrs *attrs); + +extern void iommu_init_early_pSeries(void); +extern void iommu_init_early_iSeries(void); +extern void iommu_init_early_dart(void); +extern void iommu_init_early_pasemi(void); + +#ifdef CONFIG_PCI +extern void pci_iommu_init(void); +extern void pci_direct_iommu_init(void); +#else +static inline void pci_iommu_init(void) { } +#endif + +extern void alloc_dart_table(void); +#if defined(CONFIG_PPC64) && defined(CONFIG_PM) +static inline void iommu_save(void) +{ + if (ppc_md.iommu_save) + ppc_md.iommu_save(); +} + +static inline void iommu_restore(void) +{ + if (ppc_md.iommu_restore) + ppc_md.iommu_restore(); +} +#endif + +#endif /* __KERNEL__ */ +#endif /* _ASM_IOMMU_H */ diff --git a/arch/powerpc/include/asm/ipcbuf.h b/arch/powerpc/include/asm/ipcbuf.h new file mode 100644 index 00000000000..2c3e1d94db1 --- /dev/null +++ b/arch/powerpc/include/asm/ipcbuf.h @@ -0,0 +1,34 @@ +#ifndef _ASM_POWERPC_IPCBUF_H +#define _ASM_POWERPC_IPCBUF_H + +/* + * The ipc64_perm structure for the powerpc is identical to + * kern_ipc_perm as we have always had 32-bit UIDs and GIDs in the + * kernel. Note extra padding because this structure is passed back + * and forth between kernel and user space. Pad space is left for: + * - 1 32-bit value to fill up for 8-byte alignment + * - 2 miscellaneous 64-bit values + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include + +struct ipc64_perm +{ + __kernel_key_t key; + __kernel_uid_t uid; + __kernel_gid_t gid; + __kernel_uid_t cuid; + __kernel_gid_t cgid; + __kernel_mode_t mode; + unsigned int seq; + unsigned int __pad1; + unsigned long long __unused1; + unsigned long long __unused2; +}; + +#endif /* _ASM_POWERPC_IPCBUF_H */ diff --git a/arch/powerpc/include/asm/ipic.h b/arch/powerpc/include/asm/ipic.h new file mode 100644 index 00000000000..4cf35531c0e --- /dev/null +++ b/arch/powerpc/include/asm/ipic.h @@ -0,0 +1,91 @@ +/* + * IPIC external definitions and structure. + * + * Maintainer: Kumar Gala + * + * Copyright 2005 Freescale Semiconductor, Inc + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifdef __KERNEL__ +#ifndef __ASM_IPIC_H__ +#define __ASM_IPIC_H__ + +#include + +/* Flags when we init the IPIC */ +#define IPIC_SPREADMODE_GRP_A 0x00000001 +#define IPIC_SPREADMODE_GRP_B 0x00000002 +#define IPIC_SPREADMODE_GRP_C 0x00000004 +#define IPIC_SPREADMODE_GRP_D 0x00000008 +#define IPIC_SPREADMODE_MIX_A 0x00000010 +#define IPIC_SPREADMODE_MIX_B 0x00000020 +#define IPIC_DISABLE_MCP_OUT 0x00000040 +#define IPIC_IRQ0_MCP 0x00000080 + +/* IPIC registers offsets */ +#define IPIC_SICFR 0x00 /* System Global Interrupt Configuration Register */ +#define IPIC_SIVCR 0x04 /* System Global Interrupt Vector Register */ +#define IPIC_SIPNR_H 0x08 /* System Internal Interrupt Pending Register (HIGH) */ +#define IPIC_SIPNR_L 0x0C /* System Internal Interrupt Pending Register (LOW) */ +#define IPIC_SIPRR_A 0x10 /* System Internal Interrupt group A Priority Register */ +#define IPIC_SIPRR_B 0x14 /* System Internal Interrupt group B Priority Register */ +#define IPIC_SIPRR_C 0x18 /* System Internal Interrupt group C Priority Register */ +#define IPIC_SIPRR_D 0x1C /* System Internal Interrupt group D Priority Register */ +#define IPIC_SIMSR_H 0x20 /* System Internal Interrupt Mask Register (HIGH) */ +#define IPIC_SIMSR_L 0x24 /* System Internal Interrupt Mask Register (LOW) */ +#define IPIC_SICNR 0x28 /* System Internal Interrupt Control Register */ +#define IPIC_SEPNR 0x2C /* System External Interrupt Pending Register */ +#define IPIC_SMPRR_A 0x30 /* System Mixed Interrupt group A Priority Register */ +#define IPIC_SMPRR_B 0x34 /* System Mixed Interrupt group B Priority Register */ +#define IPIC_SEMSR 0x38 /* System External Interrupt Mask Register */ +#define IPIC_SECNR 0x3C /* System External Interrupt Control Register */ +#define IPIC_SERSR 0x40 /* System Error Status Register */ +#define IPIC_SERMR 0x44 /* System Error Mask Register */ +#define IPIC_SERCR 0x48 /* System Error Control Register */ +#define IPIC_SIFCR_H 0x50 /* System Internal Interrupt Force Register (HIGH) */ +#define IPIC_SIFCR_L 0x54 /* System Internal Interrupt Force Register (LOW) */ +#define IPIC_SEFCR 0x58 /* System External Interrupt Force Register */ +#define IPIC_SERFR 0x5C /* System Error Force Register */ +#define IPIC_SCVCR 0x60 /* System Critical Interrupt Vector Register */ +#define IPIC_SMVCR 0x64 /* System Management Interrupt Vector Register */ + +enum ipic_prio_grp { + IPIC_INT_GRP_A = IPIC_SIPRR_A, + IPIC_INT_GRP_D = IPIC_SIPRR_D, + IPIC_MIX_GRP_A = IPIC_SMPRR_A, + IPIC_MIX_GRP_B = IPIC_SMPRR_B, +}; + +enum ipic_mcp_irq { + IPIC_MCP_IRQ0 = 0, + IPIC_MCP_WDT = 1, + IPIC_MCP_SBA = 2, + IPIC_MCP_PCI1 = 5, + IPIC_MCP_PCI2 = 6, + IPIC_MCP_MU = 7, +}; + +extern int ipic_set_priority(unsigned int irq, unsigned int priority); +extern void ipic_set_highest_priority(unsigned int irq); +extern void ipic_set_default_priority(void); +extern void ipic_enable_mcp(enum ipic_mcp_irq mcp_irq); +extern void ipic_disable_mcp(enum ipic_mcp_irq mcp_irq); +extern u32 ipic_get_mcp_status(void); +extern void ipic_clear_mcp_status(u32 mask); + +#ifdef CONFIG_PPC_MERGE +extern struct ipic * ipic_init(struct device_node *node, unsigned int flags); +extern unsigned int ipic_get_irq(void); +#else +extern void ipic_init(phys_addr_t phys_addr, unsigned int flags, + unsigned int irq_offset, + unsigned char *senses, unsigned int senses_count); +extern int ipic_get_irq(void); +#endif + +#endif /* __ASM_IPIC_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h new file mode 100644 index 00000000000..1ef8e304e0e --- /dev/null +++ b/arch/powerpc/include/asm/irq.h @@ -0,0 +1,654 @@ +#ifdef __KERNEL__ +#ifndef _ASM_POWERPC_IRQ_H +#define _ASM_POWERPC_IRQ_H + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include + +#include +#include + + +#define get_irq_desc(irq) (&irq_desc[(irq)]) + +/* Define a way to iterate across irqs. */ +#define for_each_irq(i) \ + for ((i) = 0; (i) < NR_IRQS; ++(i)) + +extern atomic_t ppc_n_lost_interrupts; + +#ifdef CONFIG_PPC_MERGE + +/* This number is used when no interrupt has been assigned */ +#define NO_IRQ (0) + +/* This is a special irq number to return from get_irq() to tell that + * no interrupt happened _and_ ignore it (don't count it as bad). Some + * platforms like iSeries rely on that. + */ +#define NO_IRQ_IGNORE ((unsigned int)-1) + +/* Total number of virq in the platform (make it a CONFIG_* option ? */ +#define NR_IRQS 512 + +/* Number of irqs reserved for the legacy controller */ +#define NUM_ISA_INTERRUPTS 16 + +/* This type is the placeholder for a hardware interrupt number. It has to + * be big enough to enclose whatever representation is used by a given + * platform. + */ +typedef unsigned long irq_hw_number_t; + +/* Interrupt controller "host" data structure. This could be defined as a + * irq domain controller. That is, it handles the mapping between hardware + * and virtual interrupt numbers for a given interrupt domain. The host + * structure is generally created by the PIC code for a given PIC instance + * (though a host can cover more than one PIC if they have a flat number + * model). It's the host callbacks that are responsible for setting the + * irq_chip on a given irq_desc after it's been mapped. + * + * The host code and data structures are fairly agnostic to the fact that + * we use an open firmware device-tree. We do have references to struct + * device_node in two places: in irq_find_host() to find the host matching + * a given interrupt controller node, and of course as an argument to its + * counterpart host->ops->match() callback. However, those are treated as + * generic pointers by the core and the fact that it's actually a device-node + * pointer is purely a convention between callers and implementation. This + * code could thus be used on other architectures by replacing those two + * by some sort of arch-specific void * "token" used to identify interrupt + * controllers. + */ +struct irq_host; +struct radix_tree_root; + +/* Functions below are provided by the host and called whenever a new mapping + * is created or an old mapping is disposed. The host can then proceed to + * whatever internal data structures management is required. It also needs + * to setup the irq_desc when returning from map(). + */ +struct irq_host_ops { + /* Match an interrupt controller device node to a host, returns + * 1 on a match + */ + int (*match)(struct irq_host *h, struct device_node *node); + + /* Create or update a mapping between a virtual irq number and a hw + * irq number. This is called only once for a given mapping. + */ + int (*map)(struct irq_host *h, unsigned int virq, irq_hw_number_t hw); + + /* Dispose of such a mapping */ + void (*unmap)(struct irq_host *h, unsigned int virq); + + /* Update of such a mapping */ + void (*remap)(struct irq_host *h, unsigned int virq, irq_hw_number_t hw); + + /* Translate device-tree interrupt specifier from raw format coming + * from the firmware to a irq_hw_number_t (interrupt line number) and + * type (sense) that can be passed to set_irq_type(). In the absence + * of this callback, irq_create_of_mapping() and irq_of_parse_and_map() + * will return the hw number in the first cell and IRQ_TYPE_NONE for + * the type (which amount to keeping whatever default value the + * interrupt controller has for that line) + */ + int (*xlate)(struct irq_host *h, struct device_node *ctrler, + u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, unsigned int *out_type); +}; + +struct irq_host { + struct list_head link; + + /* type of reverse mapping technique */ + unsigned int revmap_type; +#define IRQ_HOST_MAP_LEGACY 0 /* legacy 8259, gets irqs 1..15 */ +#define IRQ_HOST_MAP_NOMAP 1 /* no fast reverse mapping */ +#define IRQ_HOST_MAP_LINEAR 2 /* linear map of interrupts */ +#define IRQ_HOST_MAP_TREE 3 /* radix tree */ + union { + struct { + unsigned int size; + unsigned int *revmap; + } linear; + struct radix_tree_root tree; + } revmap_data; + struct irq_host_ops *ops; + void *host_data; + irq_hw_number_t inval_irq; + + /* Optional device node pointer */ + struct device_node *of_node; +}; + +/* The main irq map itself is an array of NR_IRQ entries containing the + * associate host and irq number. An entry with a host of NULL is free. + * An entry can be allocated if it's free, the allocator always then sets + * hwirq first to the host's invalid irq number and then fills ops. + */ +struct irq_map_entry { + irq_hw_number_t hwirq; + struct irq_host *host; +}; + +extern struct irq_map_entry irq_map[NR_IRQS]; + +extern irq_hw_number_t virq_to_hw(unsigned int virq); + +/** + * irq_alloc_host - Allocate a new irq_host data structure + * @of_node: optional device-tree node of the interrupt controller + * @revmap_type: type of reverse mapping to use + * @revmap_arg: for IRQ_HOST_MAP_LINEAR linear only: size of the map + * @ops: map/unmap host callbacks + * @inval_irq: provide a hw number in that host space that is always invalid + * + * Allocates and initialize and irq_host structure. Note that in the case of + * IRQ_HOST_MAP_LEGACY, the map() callback will be called before this returns + * for all legacy interrupts except 0 (which is always the invalid irq for + * a legacy controller). For a IRQ_HOST_MAP_LINEAR, the map is allocated by + * this call as well. For a IRQ_HOST_MAP_TREE, the radix tree will be allocated + * later during boot automatically (the reverse mapping will use the slow path + * until that happens). + */ +extern struct irq_host *irq_alloc_host(struct device_node *of_node, + unsigned int revmap_type, + unsigned int revmap_arg, + struct irq_host_ops *ops, + irq_hw_number_t inval_irq); + + +/** + * irq_find_host - Locates a host for a given device node + * @node: device-tree node of the interrupt controller + */ +extern struct irq_host *irq_find_host(struct device_node *node); + + +/** + * irq_set_default_host - Set a "default" host + * @host: default host pointer + * + * For convenience, it's possible to set a "default" host that will be used + * whenever NULL is passed to irq_create_mapping(). It makes life easier for + * platforms that want to manipulate a few hard coded interrupt numbers that + * aren't properly represented in the device-tree. + */ +extern void irq_set_default_host(struct irq_host *host); + + +/** + * irq_set_virq_count - Set the maximum number of virt irqs + * @count: number of linux virtual irqs, capped with NR_IRQS + * + * This is mainly for use by platforms like iSeries who want to program + * the virtual irq number in the controller to avoid the reverse mapping + */ +extern void irq_set_virq_count(unsigned int count); + + +/** + * irq_create_mapping - Map a hardware interrupt into linux virq space + * @host: host owning this hardware interrupt or NULL for default host + * @hwirq: hardware irq number in that host space + * + * Only one mapping per hardware interrupt is permitted. Returns a linux + * virq number. + * If the sense/trigger is to be specified, set_irq_type() should be called + * on the number returned from that call. + */ +extern unsigned int irq_create_mapping(struct irq_host *host, + irq_hw_number_t hwirq); + + +/** + * irq_dispose_mapping - Unmap an interrupt + * @virq: linux virq number of the interrupt to unmap + */ +extern void irq_dispose_mapping(unsigned int virq); + +/** + * irq_find_mapping - Find a linux virq from an hw irq number. + * @host: host owning this hardware interrupt + * @hwirq: hardware irq number in that host space + * + * This is a slow path, for use by generic code. It's expected that an + * irq controller implementation directly calls the appropriate low level + * mapping function. + */ +extern unsigned int irq_find_mapping(struct irq_host *host, + irq_hw_number_t hwirq); + +/** + * irq_create_direct_mapping - Allocate a virq for direct mapping + * @host: host to allocate the virq for or NULL for default host + * + * This routine is used for irq controllers which can choose the hardware + * interrupt numbers they generate. In such a case it's simplest to use + * the linux virq as the hardware interrupt number. + */ +extern unsigned int irq_create_direct_mapping(struct irq_host *host); + +/** + * irq_radix_revmap - Find a linux virq from a hw irq number. + * @host: host owning this hardware interrupt + * @hwirq: hardware irq number in that host space + * + * This is a fast path, for use by irq controller code that uses radix tree + * revmaps + */ +extern unsigned int irq_radix_revmap(struct irq_host *host, + irq_hw_number_t hwirq); + +/** + * irq_linear_revmap - Find a linux virq from a hw irq number. + * @host: host owning this hardware interrupt + * @hwirq: hardware irq number in that host space + * + * This is a fast path, for use by irq controller code that uses linear + * revmaps. It does fallback to the slow path if the revmap doesn't exist + * yet and will create the revmap entry with appropriate locking + */ + +extern unsigned int irq_linear_revmap(struct irq_host *host, + irq_hw_number_t hwirq); + + + +/** + * irq_alloc_virt - Allocate virtual irq numbers + * @host: host owning these new virtual irqs + * @count: number of consecutive numbers to allocate + * @hint: pass a hint number, the allocator will try to use a 1:1 mapping + * + * This is a low level function that is used internally by irq_create_mapping() + * and that can be used by some irq controllers implementations for things + * like allocating ranges of numbers for MSIs. The revmaps are left untouched. + */ +extern unsigned int irq_alloc_virt(struct irq_host *host, + unsigned int count, + unsigned int hint); + +/** + * irq_free_virt - Free virtual irq numbers + * @virq: virtual irq number of the first interrupt to free + * @count: number of interrupts to free + * + * This function is the opposite of irq_alloc_virt. It will not clear reverse + * maps, this should be done previously by unmap'ing the interrupt. In fact, + * all interrupts covered by the range being freed should have been unmapped + * prior to calling this. + */ +extern void irq_free_virt(unsigned int virq, unsigned int count); + + +/* -- OF helpers -- */ + +/* irq_create_of_mapping - Map a hardware interrupt into linux virq space + * @controller: Device node of the interrupt controller + * @inspec: Interrupt specifier from the device-tree + * @intsize: Size of the interrupt specifier from the device-tree + * + * This function is identical to irq_create_mapping except that it takes + * as input informations straight from the device-tree (typically the results + * of the of_irq_map_*() functions. + */ +extern unsigned int irq_create_of_mapping(struct device_node *controller, + u32 *intspec, unsigned int intsize); + + +/* irq_of_parse_and_map - Parse nad Map an interrupt into linux virq space + * @device: Device node of the device whose interrupt is to be mapped + * @index: Index of the interrupt to map + * + * This function is a wrapper that chains of_irq_map_one() and + * irq_create_of_mapping() to make things easier to callers + */ +extern unsigned int irq_of_parse_and_map(struct device_node *dev, int index); + +/* -- End OF helpers -- */ + +/** + * irq_early_init - Init irq remapping subsystem + */ +extern void irq_early_init(void); + +static __inline__ int irq_canonicalize(int irq) +{ + return irq; +} + + +#else /* CONFIG_PPC_MERGE */ + +/* This number is used when no interrupt has been assigned */ +#define NO_IRQ (-1) +#define NO_IRQ_IGNORE (-2) + + +/* + * These constants are used for passing information about interrupt + * signal polarity and level/edge sensing to the low-level PIC chip + * drivers. + */ +#define IRQ_SENSE_MASK 0x1 +#define IRQ_SENSE_LEVEL 0x1 /* interrupt on active level */ +#define IRQ_SENSE_EDGE 0x0 /* interrupt triggered by edge */ + +#define IRQ_POLARITY_MASK 0x2 +#define IRQ_POLARITY_POSITIVE 0x2 /* high level or low->high edge */ +#define IRQ_POLARITY_NEGATIVE 0x0 /* low level or high->low edge */ + + +#if defined(CONFIG_40x) +#include + +#ifndef NR_BOARD_IRQS +#define NR_BOARD_IRQS 0 +#endif + +#ifndef UIC_WIDTH /* Number of interrupts per device */ +#define UIC_WIDTH 32 +#endif + +#ifndef NR_UICS /* number of UIC devices */ +#define NR_UICS 1 +#endif + +#if defined (CONFIG_403) +/* + * The PowerPC 403 cores' Asynchronous Interrupt Controller (AIC) has + * 32 possible interrupts, a majority of which are not implemented on + * all cores. There are six configurable, external interrupt pins and + * there are eight internal interrupts for the on-chip serial port + * (SPU), DMA controller, and JTAG controller. + * + */ + +#define NR_AIC_IRQS 32 +#define NR_IRQS (NR_AIC_IRQS + NR_BOARD_IRQS) + +#elif !defined (CONFIG_403) + +/* + * The PowerPC 405 cores' Universal Interrupt Controller (UIC) has 32 + * possible interrupts as well. There are seven, configurable external + * interrupt pins and there are 17 internal interrupts for the on-chip + * serial port, DMA controller, on-chip Ethernet controller, PCI, etc. + * + */ + + +#define NR_UIC_IRQS UIC_WIDTH +#define NR_IRQS ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS) +#endif + +#elif defined(CONFIG_44x) +#include + +#define NR_UIC_IRQS 32 +#define NR_IRQS ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS) + +#elif defined(CONFIG_8xx) + +/* Now include the board configuration specific associations. +*/ +#include + +/* The MPC8xx cores have 16 possible interrupts. There are eight + * possible level sensitive interrupts assigned and generated internally + * from such devices as CPM, PCMCIA, RTC, PIT, TimeBase and Decrementer. + * There are eight external interrupts (IRQs) that can be configured + * as either level or edge sensitive. + * + * On some implementations, there is also the possibility of an 8259 + * through the PCI and PCI-ISA bridges. + * + * We are "flattening" the interrupt vectors of the cascaded CPM + * and 8259 interrupt controllers so that we can uniquely identify + * any interrupt source with a single integer. + */ +#define NR_SIU_INTS 16 +#define NR_CPM_INTS 32 +#ifndef NR_8259_INTS +#define NR_8259_INTS 0 +#endif + +#define SIU_IRQ_OFFSET 0 +#define CPM_IRQ_OFFSET (SIU_IRQ_OFFSET + NR_SIU_INTS) +#define I8259_IRQ_OFFSET (CPM_IRQ_OFFSET + NR_CPM_INTS) + +#define NR_IRQS (NR_SIU_INTS + NR_CPM_INTS + NR_8259_INTS) + +/* These values must be zero-based and map 1:1 with the SIU configuration. + * They are used throughout the 8xx I/O subsystem to generate + * interrupt masks, flags, and other control patterns. This is why the + * current kernel assumption of the 8259 as the base controller is such + * a pain in the butt. + */ +#define SIU_IRQ0 (0) /* Highest priority */ +#define SIU_LEVEL0 (1) +#define SIU_IRQ1 (2) +#define SIU_LEVEL1 (3) +#define SIU_IRQ2 (4) +#define SIU_LEVEL2 (5) +#define SIU_IRQ3 (6) +#define SIU_LEVEL3 (7) +#define SIU_IRQ4 (8) +#define SIU_LEVEL4 (9) +#define SIU_IRQ5 (10) +#define SIU_LEVEL5 (11) +#define SIU_IRQ6 (12) +#define SIU_LEVEL6 (13) +#define SIU_IRQ7 (14) +#define SIU_LEVEL7 (15) + +#define MPC8xx_INT_FEC1 SIU_LEVEL1 +#define MPC8xx_INT_FEC2 SIU_LEVEL3 + +#define MPC8xx_INT_SCC1 (CPM_IRQ_OFFSET + CPMVEC_SCC1) +#define MPC8xx_INT_SCC2 (CPM_IRQ_OFFSET + CPMVEC_SCC2) +#define MPC8xx_INT_SCC3 (CPM_IRQ_OFFSET + CPMVEC_SCC3) +#define MPC8xx_INT_SCC4 (CPM_IRQ_OFFSET + CPMVEC_SCC4) +#define MPC8xx_INT_SMC1 (CPM_IRQ_OFFSET + CPMVEC_SMC1) +#define MPC8xx_INT_SMC2 (CPM_IRQ_OFFSET + CPMVEC_SMC2) + +/* The internal interrupts we can configure as we see fit. + * My personal preference is CPM at level 2, which puts it above the + * MBX PCI/ISA/IDE interrupts. + */ +#ifndef PIT_INTERRUPT +#define PIT_INTERRUPT SIU_LEVEL0 +#endif +#ifndef CPM_INTERRUPT +#define CPM_INTERRUPT SIU_LEVEL2 +#endif +#ifndef PCMCIA_INTERRUPT +#define PCMCIA_INTERRUPT SIU_LEVEL6 +#endif +#ifndef DEC_INTERRUPT +#define DEC_INTERRUPT SIU_LEVEL7 +#endif + +/* Some internal interrupt registers use an 8-bit mask for the interrupt + * level instead of a number. + */ +#define mk_int_int_mask(IL) (1 << (7 - (IL/2))) + +#else /* CONFIG_40x + CONFIG_8xx */ +/* + * this is the # irq's for all ppc arch's (pmac/chrp/prep) + * so it is the max of them all + */ +#define NR_IRQS 256 +#define __DO_IRQ_CANON 1 + +#ifndef CONFIG_8260 + +#define NUM_8259_INTERRUPTS 16 + +#else /* CONFIG_8260 */ + +/* The 8260 has an internal interrupt controller with a maximum of + * 64 IRQs. We will use NR_IRQs from above since it is large enough. + * Don't be confused by the 8260 documentation where they list an + * "interrupt number" and "interrupt vector". We are only interested + * in the interrupt vector. There are "reserved" holes where the + * vector number increases, but the interrupt number in the table does not. + * (Document errata updates have fixed this...make sure you have up to + * date processor documentation -- Dan). + */ + +#ifndef CPM_IRQ_OFFSET +#define CPM_IRQ_OFFSET 0 +#endif + +#define NR_CPM_INTS 64 + +#define SIU_INT_ERROR ((uint)0x00 + CPM_IRQ_OFFSET) +#define SIU_INT_I2C ((uint)0x01 + CPM_IRQ_OFFSET) +#define SIU_INT_SPI ((uint)0x02 + CPM_IRQ_OFFSET) +#define SIU_INT_RISC ((uint)0x03 + CPM_IRQ_OFFSET) +#define SIU_INT_SMC1 ((uint)0x04 + CPM_IRQ_OFFSET) +#define SIU_INT_SMC2 ((uint)0x05 + CPM_IRQ_OFFSET) +#define SIU_INT_IDMA1 ((uint)0x06 + CPM_IRQ_OFFSET) +#define SIU_INT_IDMA2 ((uint)0x07 + CPM_IRQ_OFFSET) +#define SIU_INT_IDMA3 ((uint)0x08 + CPM_IRQ_OFFSET) +#define SIU_INT_IDMA4 ((uint)0x09 + CPM_IRQ_OFFSET) +#define SIU_INT_SDMA ((uint)0x0a + CPM_IRQ_OFFSET) +#define SIU_INT_USB ((uint)0x0b + CPM_IRQ_OFFSET) +#define SIU_INT_TIMER1 ((uint)0x0c + CPM_IRQ_OFFSET) +#define SIU_INT_TIMER2 ((uint)0x0d + CPM_IRQ_OFFSET) +#define SIU_INT_TIMER3 ((uint)0x0e + CPM_IRQ_OFFSET) +#define SIU_INT_TIMER4 ((uint)0x0f + CPM_IRQ_OFFSET) +#define SIU_INT_TMCNT ((uint)0x10 + CPM_IRQ_OFFSET) +#define SIU_INT_PIT ((uint)0x11 + CPM_IRQ_OFFSET) +#define SIU_INT_PCI ((uint)0x12 + CPM_IRQ_OFFSET) +#define SIU_INT_IRQ1 ((uint)0x13 + CPM_IRQ_OFFSET) +#define SIU_INT_IRQ2 ((uint)0x14 + CPM_IRQ_OFFSET) +#define SIU_INT_IRQ3 ((uint)0x15 + CPM_IRQ_OFFSET) +#define SIU_INT_IRQ4 ((uint)0x16 + CPM_IRQ_OFFSET) +#define SIU_INT_IRQ5 ((uint)0x17 + CPM_IRQ_OFFSET) +#define SIU_INT_IRQ6 ((uint)0x18 + CPM_IRQ_OFFSET) +#define SIU_INT_IRQ7 ((uint)0x19 + CPM_IRQ_OFFSET) +#define SIU_INT_FCC1 ((uint)0x20 + CPM_IRQ_OFFSET) +#define SIU_INT_FCC2 ((uint)0x21 + CPM_IRQ_OFFSET) +#define SIU_INT_FCC3 ((uint)0x22 + CPM_IRQ_OFFSET) +#define SIU_INT_MCC1 ((uint)0x24 + CPM_IRQ_OFFSET) +#define SIU_INT_MCC2 ((uint)0x25 + CPM_IRQ_OFFSET) +#define SIU_INT_SCC1 ((uint)0x28 + CPM_IRQ_OFFSET) +#define SIU_INT_SCC2 ((uint)0x29 + CPM_IRQ_OFFSET) +#define SIU_INT_SCC3 ((uint)0x2a + CPM_IRQ_OFFSET) +#define SIU_INT_SCC4 ((uint)0x2b + CPM_IRQ_OFFSET) +#define SIU_INT_PC15 ((uint)0x30 + CPM_IRQ_OFFSET) +#define SIU_INT_PC14 ((uint)0x31 + CPM_IRQ_OFFSET) +#define SIU_INT_PC13 ((uint)0x32 + CPM_IRQ_OFFSET) +#define SIU_INT_PC12 ((uint)0x33 + CPM_IRQ_OFFSET) +#define SIU_INT_PC11 ((uint)0x34 + CPM_IRQ_OFFSET) +#define SIU_INT_PC10 ((uint)0x35 + CPM_IRQ_OFFSET) +#define SIU_INT_PC9 ((uint)0x36 + CPM_IRQ_OFFSET) +#define SIU_INT_PC8 ((uint)0x37 + CPM_IRQ_OFFSET) +#define SIU_INT_PC7 ((uint)0x38 + CPM_IRQ_OFFSET) +#define SIU_INT_PC6 ((uint)0x39 + CPM_IRQ_OFFSET) +#define SIU_INT_PC5 ((uint)0x3a + CPM_IRQ_OFFSET) +#define SIU_INT_PC4 ((uint)0x3b + CPM_IRQ_OFFSET) +#define SIU_INT_PC3 ((uint)0x3c + CPM_IRQ_OFFSET) +#define SIU_INT_PC2 ((uint)0x3d + CPM_IRQ_OFFSET) +#define SIU_INT_PC1 ((uint)0x3e + CPM_IRQ_OFFSET) +#define SIU_INT_PC0 ((uint)0x3f + CPM_IRQ_OFFSET) + +#endif /* CONFIG_8260 */ + +#endif /* Whatever way too big #ifdef */ + +#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) +/* pedantic: these are long because they are used with set_bit --RR */ +extern unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; + +/* + * Because many systems have two overlapping names spaces for + * interrupts (ISA and XICS for example), and the ISA interrupts + * have historically not been easy to renumber, we allow ISA + * interrupts to take values 0 - 15, and shift up the remaining + * interrupts by 0x10. + */ +#define NUM_ISA_INTERRUPTS 0x10 +extern int __irq_offset_value; + +static inline int irq_offset_up(int irq) +{ + return(irq + __irq_offset_value); +} + +static inline int irq_offset_down(int irq) +{ + return(irq - __irq_offset_value); +} + +static inline int irq_offset_value(void) +{ + return __irq_offset_value; +} + +#ifdef __DO_IRQ_CANON +extern int ppc_do_canonicalize_irqs; +#else +#define ppc_do_canonicalize_irqs 0 +#endif + +static __inline__ int irq_canonicalize(int irq) +{ + if (ppc_do_canonicalize_irqs && irq == 2) + irq = 9; + return irq; +} +#endif /* CONFIG_PPC_MERGE */ + +extern int distribute_irqs; + +struct irqaction; +struct pt_regs; + +#define __ARCH_HAS_DO_SOFTIRQ + +#if defined(CONFIG_BOOKE) || defined(CONFIG_40x) +/* + * Per-cpu stacks for handling critical, debug and machine check + * level interrupts. + */ +extern struct thread_info *critirq_ctx[NR_CPUS]; +extern struct thread_info *dbgirq_ctx[NR_CPUS]; +extern struct thread_info *mcheckirq_ctx[NR_CPUS]; +extern void exc_lvl_ctx_init(void); +#else +#define exc_lvl_ctx_init() +#endif + +#ifdef CONFIG_IRQSTACKS +/* + * Per-cpu stacks for handling hard and soft interrupts. + */ +extern struct thread_info *hardirq_ctx[NR_CPUS]; +extern struct thread_info *softirq_ctx[NR_CPUS]; + +extern void irq_ctx_init(void); +extern void call_do_softirq(struct thread_info *tp); +extern int call_handle_irq(int irq, void *p1, + struct thread_info *tp, void *func); +#else +#define irq_ctx_init() + +#endif /* CONFIG_IRQSTACKS */ + +extern void do_IRQ(struct pt_regs *regs); + +#endif /* _ASM_IRQ_H */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/irq_regs.h b/arch/powerpc/include/asm/irq_regs.h new file mode 100644 index 00000000000..ba94b51a0a7 --- /dev/null +++ b/arch/powerpc/include/asm/irq_regs.h @@ -0,0 +1,2 @@ +#include + diff --git a/arch/powerpc/include/asm/irqflags.h b/arch/powerpc/include/asm/irqflags.h new file mode 100644 index 00000000000..17ba3a881bf --- /dev/null +++ b/arch/powerpc/include/asm/irqflags.h @@ -0,0 +1,42 @@ +/* + * IRQ flags handling + */ +#ifndef _ASM_IRQFLAGS_H +#define _ASM_IRQFLAGS_H + +#ifndef __ASSEMBLY__ +/* + * Get definitions for raw_local_save_flags(x), etc. + */ +#include + +#else +#ifdef CONFIG_TRACE_IRQFLAGS +/* + * Most of the CPU's IRQ-state tracing is done from assembly code; we + * have to call a C function so call a wrapper that saves all the + * C-clobbered registers. + */ +#define TRACE_ENABLE_INTS bl .trace_hardirqs_on +#define TRACE_DISABLE_INTS bl .trace_hardirqs_off +#define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip) \ + cmpdi en, 0; \ + bne 95f; \ + stb en,PACASOFTIRQEN(r13); \ + bl .trace_hardirqs_off; \ + b skip; \ +95: bl .trace_hardirqs_on; \ + li en,1; +#define TRACE_AND_RESTORE_IRQ(en) \ + TRACE_AND_RESTORE_IRQ_PARTIAL(en,96f); \ +96: stb en,PACASOFTIRQEN(r13) +#else +#define TRACE_ENABLE_INTS +#define TRACE_DISABLE_INTS +#define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip) +#define TRACE_AND_RESTORE_IRQ(en) \ + stb en,PACASOFTIRQEN(r13) +#endif +#endif + +#endif diff --git a/arch/powerpc/include/asm/iseries/alpaca.h b/arch/powerpc/include/asm/iseries/alpaca.h new file mode 100644 index 00000000000..c0cce6727a6 --- /dev/null +++ b/arch/powerpc/include/asm/iseries/alpaca.h @@ -0,0 +1,31 @@ +/* + * Copyright © 2008 Stephen Rothwell IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _ASM_POWERPC_ISERIES_ALPACA_H +#define _ASM_POWERPC_ISERIES_ALPACA_H + +/* + * This is the part of the paca that the iSeries hypervisor + * needs to be statically initialised. Immediately after boot + * we switch to the normal Linux paca. + */ +struct alpaca { + struct lppaca *lppaca_ptr; /* Pointer to LpPaca for PLIC */ + const void *reg_save_ptr; /* Pointer to LpRegSave for PLIC */ +}; + +#endif /* _ASM_POWERPC_ISERIES_ALPACA_H */ diff --git a/arch/powerpc/include/asm/iseries/hv_call.h b/arch/powerpc/include/asm/iseries/hv_call.h new file mode 100644 index 00000000000..162d653ad51 --- /dev/null +++ b/arch/powerpc/include/asm/iseries/hv_call.h @@ -0,0 +1,111 @@ +/* + * Copyright (C) 2001 Mike Corrigan IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * This file contains the "hypervisor call" interface which is used to + * drive the hypervisor from the OS. + */ +#ifndef _ASM_POWERPC_ISERIES_HV_CALL_H +#define _ASM_POWERPC_ISERIES_HV_CALL_H + +#include +#include +#include + +/* Type of yield for HvCallBaseYieldProcessor */ +#define HvCall_YieldTimed 0 /* Yield until specified time (tb) */ +#define HvCall_YieldToActive 1 /* Yield until all active procs have run */ +#define HvCall_YieldToProc 2 /* Yield until the specified processor has run */ + +/* interrupt masks for setEnabledInterrupts */ +#define HvCall_MaskIPI 0x00000001 +#define HvCall_MaskLpEvent 0x00000002 +#define HvCall_MaskLpProd 0x00000004 +#define HvCall_MaskTimeout 0x00000008 + +/* Log buffer formats */ +#define HvCall_LogBuffer_ASCII 0 +#define HvCall_LogBuffer_EBCDIC 1 + +#define HvCallBaseAckDeferredInts HvCallBase + 0 +#define HvCallBaseCpmPowerOff HvCallBase + 1 +#define HvCallBaseGetHwPatch HvCallBase + 2 +#define HvCallBaseReIplSpAttn HvCallBase + 3 +#define HvCallBaseSetASR HvCallBase + 4 +#define HvCallBaseSetASRAndRfi HvCallBase + 5 +#define HvCallBaseSetIMR HvCallBase + 6 +#define HvCallBaseSendIPI HvCallBase + 7 +#define HvCallBaseTerminateMachine HvCallBase + 8 +#define HvCallBaseTerminateMachineSrc HvCallBase + 9 +#define HvCallBaseProcessPlicInterrupts HvCallBase + 10 +#define HvCallBaseIsPrimaryCpmOrMsdIpl HvCallBase + 11 +#define HvCallBaseSetVirtualSIT HvCallBase + 12 +#define HvCallBaseVaryOffThisProcessor HvCallBase + 13 +#define HvCallBaseVaryOffMemoryChunk HvCallBase + 14 +#define HvCallBaseVaryOffInteractivePercentage HvCallBase + 15 +#define HvCallBaseSendLpProd HvCallBase + 16 +#define HvCallBaseSetEnabledInterrupts HvCallBase + 17 +#define HvCallBaseYieldProcessor HvCallBase + 18 +#define HvCallBaseVaryOffSharedProcUnits HvCallBase + 19 +#define HvCallBaseSetVirtualDecr HvCallBase + 20 +#define HvCallBaseClearLogBuffer HvCallBase + 21 +#define HvCallBaseGetLogBufferCodePage HvCallBase + 22 +#define HvCallBaseGetLogBufferFormat HvCallBase + 23 +#define HvCallBaseGetLogBufferLength HvCallBase + 24 +#define HvCallBaseReadLogBuffer HvCallBase + 25 +#define HvCallBaseSetLogBufferFormatAndCodePage HvCallBase + 26 +#define HvCallBaseWriteLogBuffer HvCallBase + 27 +#define HvCallBaseRouter28 HvCallBase + 28 +#define HvCallBaseRouter29 HvCallBase + 29 +#define HvCallBaseRouter30 HvCallBase + 30 +#define HvCallBaseSetDebugBus HvCallBase + 31 + +#define HvCallCcSetDABR HvCallCc + 7 + +static inline void HvCall_setVirtualDecr(void) +{ + /* + * Ignore any error return codes - most likely means that the + * target value for the LP has been increased and this vary off + * would bring us below the new target. + */ + HvCall0(HvCallBaseSetVirtualDecr); +} + +static inline void HvCall_yieldProcessor(unsigned typeOfYield, u64 yieldParm) +{ + HvCall2(HvCallBaseYieldProcessor, typeOfYield, yieldParm); +} + +static inline void HvCall_setEnabledInterrupts(u64 enabledInterrupts) +{ + HvCall1(HvCallBaseSetEnabledInterrupts, enabledInterrupts); +} + +static inline void HvCall_setLogBufferFormatAndCodepage(int format, + u32 codePage) +{ + HvCall2(HvCallBaseSetLogBufferFormatAndCodePage, format, codePage); +} + +extern void HvCall_writeLogBuffer(const void *buffer, u64 bufLen); + +static inline void HvCall_sendIPI(struct paca_struct *targetPaca) +{ + HvCall1(HvCallBaseSendIPI, targetPaca->paca_index); +} + +#endif /* _ASM_POWERPC_ISERIES_HV_CALL_H */ diff --git a/arch/powerpc/include/asm/iseries/hv_call_event.h b/arch/powerpc/include/asm/iseries/hv_call_event.h new file mode 100644 index 00000000000..cc029d388e1 --- /dev/null +++ b/arch/powerpc/include/asm/iseries/hv_call_event.h @@ -0,0 +1,201 @@ +/* + * Copyright (C) 2001 Mike Corrigan IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * This file contains the "hypervisor call" interface which is used to + * drive the hypervisor from the OS. + */ +#ifndef _ASM_POWERPC_ISERIES_HV_CALL_EVENT_H +#define _ASM_POWERPC_ISERIES_HV_CALL_EVENT_H + +#include +#include + +#include +#include +#include + +struct HvLpEvent; + +typedef u8 HvLpEvent_Type; +typedef u8 HvLpEvent_AckInd; +typedef u8 HvLpEvent_AckType; + +typedef u8 HvLpDma_Direction; +typedef u8 HvLpDma_AddressType; + +typedef u64 HvLpEvent_Rc; +typedef u64 HvLpDma_Rc; + +#define HvCallEventAckLpEvent HvCallEvent + 0 +#define HvCallEventCancelLpEvent HvCallEvent + 1 +#define HvCallEventCloseLpEventPath HvCallEvent + 2 +#define HvCallEventDmaBufList HvCallEvent + 3 +#define HvCallEventDmaSingle HvCallEvent + 4 +#define HvCallEventDmaToSp HvCallEvent + 5 +#define HvCallEventGetOverflowLpEvents HvCallEvent + 6 +#define HvCallEventGetSourceLpInstanceId HvCallEvent + 7 +#define HvCallEventGetTargetLpInstanceId HvCallEvent + 8 +#define HvCallEventOpenLpEventPath HvCallEvent + 9 +#define HvCallEventSetLpEventStack HvCallEvent + 10 +#define HvCallEventSignalLpEvent HvCallEvent + 11 +#define HvCallEventSignalLpEventParms HvCallEvent + 12 +#define HvCallEventSetInterLpQueueIndex HvCallEvent + 13 +#define HvCallEventSetLpEventQueueInterruptProc HvCallEvent + 14 +#define HvCallEventRouter15 HvCallEvent + 15 + +static inline void HvCallEvent_getOverflowLpEvents(u8 queueIndex) +{ + HvCall1(HvCallEventGetOverflowLpEvents, queueIndex); +} + +static inline void HvCallEvent_setInterLpQueueIndex(u8 queueIndex) +{ + HvCall1(HvCallEventSetInterLpQueueIndex, queueIndex); +} + +static inline void HvCallEvent_setLpEventStack(u8 queueIndex, + char *eventStackAddr, u32 eventStackSize) +{ + HvCall3(HvCallEventSetLpEventStack, queueIndex, + virt_to_abs(eventStackAddr), eventStackSize); +} + +static inline void HvCallEvent_setLpEventQueueInterruptProc(u8 queueIndex, + u16 lpLogicalProcIndex) +{ + HvCall2(HvCallEventSetLpEventQueueInterruptProc, queueIndex, + lpLogicalProcIndex); +} + +static inline HvLpEvent_Rc HvCallEvent_signalLpEvent(struct HvLpEvent *event) +{ + return HvCall1(HvCallEventSignalLpEvent, virt_to_abs(event)); +} + +static inline HvLpEvent_Rc HvCallEvent_signalLpEventFast(HvLpIndex targetLp, + HvLpEvent_Type type, u16 subtype, HvLpEvent_AckInd ackInd, + HvLpEvent_AckType ackType, HvLpInstanceId sourceInstanceId, + HvLpInstanceId targetInstanceId, u64 correlationToken, + u64 eventData1, u64 eventData2, u64 eventData3, + u64 eventData4, u64 eventData5) +{ + /* Pack the misc bits into a single Dword to pass to PLIC */ + union { + struct { + u8 ack_and_target; + u8 type; + u16 subtype; + HvLpInstanceId src_inst; + HvLpInstanceId target_inst; + } parms; + u64 dword; + } packed; + + packed.parms.ack_and_target = (ackType << 7) | (ackInd << 6) | targetLp; + packed.parms.type = type; + packed.parms.subtype = subtype; + packed.parms.src_inst = sourceInstanceId; + packed.parms.target_inst = targetInstanceId; + + return HvCall7(HvCallEventSignalLpEventParms, packed.dword, + correlationToken, eventData1, eventData2, + eventData3, eventData4, eventData5); +} + +extern void *iseries_hv_alloc(size_t size, dma_addr_t *dma_handle, gfp_t flag); +extern void iseries_hv_free(size_t size, void *vaddr, dma_addr_t dma_handle); +extern dma_addr_t iseries_hv_map(void *vaddr, size_t size, + enum dma_data_direction direction); +extern void iseries_hv_unmap(dma_addr_t dma_handle, size_t size, + enum dma_data_direction direction); + +static inline HvLpEvent_Rc HvCallEvent_ackLpEvent(struct HvLpEvent *event) +{ + return HvCall1(HvCallEventAckLpEvent, virt_to_abs(event)); +} + +static inline HvLpEvent_Rc HvCallEvent_cancelLpEvent(struct HvLpEvent *event) +{ + return HvCall1(HvCallEventCancelLpEvent, virt_to_abs(event)); +} + +static inline HvLpInstanceId HvCallEvent_getSourceLpInstanceId( + HvLpIndex targetLp, HvLpEvent_Type type) +{ + return HvCall2(HvCallEventGetSourceLpInstanceId, targetLp, type); +} + +static inline HvLpInstanceId HvCallEvent_getTargetLpInstanceId( + HvLpIndex targetLp, HvLpEvent_Type type) +{ + return HvCall2(HvCallEventGetTargetLpInstanceId, targetLp, type); +} + +static inline void HvCallEvent_openLpEventPath(HvLpIndex targetLp, + HvLpEvent_Type type) +{ + HvCall2(HvCallEventOpenLpEventPath, targetLp, type); +} + +static inline void HvCallEvent_closeLpEventPath(HvLpIndex targetLp, + HvLpEvent_Type type) +{ + HvCall2(HvCallEventCloseLpEventPath, targetLp, type); +} + +static inline HvLpDma_Rc HvCallEvent_dmaBufList(HvLpEvent_Type type, + HvLpIndex remoteLp, HvLpDma_Direction direction, + HvLpInstanceId localInstanceId, + HvLpInstanceId remoteInstanceId, + HvLpDma_AddressType localAddressType, + HvLpDma_AddressType remoteAddressType, + /* Do these need to be converted to absolute addresses? */ + u64 localBufList, u64 remoteBufList, u32 transferLength) +{ + /* Pack the misc bits into a single Dword to pass to PLIC */ + union { + struct { + u8 flags; + HvLpIndex remote; + u8 type; + u8 reserved; + HvLpInstanceId local_inst; + HvLpInstanceId remote_inst; + } parms; + u64 dword; + } packed; + + packed.parms.flags = (direction << 7) | + (localAddressType << 6) | (remoteAddressType << 5); + packed.parms.remote = remoteLp; + packed.parms.type = type; + packed.parms.reserved = 0; + packed.parms.local_inst = localInstanceId; + packed.parms.remote_inst = remoteInstanceId; + + return HvCall4(HvCallEventDmaBufList, packed.dword, localBufList, + remoteBufList, transferLength); +} + +static inline HvLpDma_Rc HvCallEvent_dmaToSp(void *local, u32 remote, + u32 length, HvLpDma_Direction dir) +{ + return HvCall4(HvCallEventDmaToSp, virt_to_abs(local), remote, + length, dir); +} + +#endif /* _ASM_POWERPC_ISERIES_HV_CALL_EVENT_H */ diff --git a/arch/powerpc/include/asm/iseries/hv_call_sc.h b/arch/powerpc/include/asm/iseries/hv_call_sc.h new file mode 100644 index 00000000000..f5d21095925 --- /dev/null +++ b/arch/powerpc/include/asm/iseries/hv_call_sc.h @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2001 Mike Corrigan IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _ASM_POWERPC_ISERIES_HV_CALL_SC_H +#define _ASM_POWERPC_ISERIES_HV_CALL_SC_H + +#include + +#define HvCallBase 0x8000000000000000ul +#define HvCallCc 0x8001000000000000ul +#define HvCallCfg 0x8002000000000000ul +#define HvCallEvent 0x8003000000000000ul +#define HvCallHpt 0x8004000000000000ul +#define HvCallPci 0x8005000000000000ul +#define HvCallSm 0x8007000000000000ul +#define HvCallXm 0x8009000000000000ul + +extern u64 HvCall0(u64); +extern u64 HvCall1(u64, u64); +extern u64 HvCall2(u64, u64, u64); +extern u64 HvCall3(u64, u64, u64, u64); +extern u64 HvCall4(u64, u64, u64, u64, u64); +extern u64 HvCall5(u64, u64, u64, u64, u64, u64); +extern u64 HvCall6(u64, u64, u64, u64, u64, u64, u64); +extern u64 HvCall7(u64, u64, u64, u64, u64, u64, u64, u64); + +extern u64 HvCall0Ret16(u64, void *); +extern u64 HvCall1Ret16(u64, void *, u64); +extern u64 HvCall2Ret16(u64, void *, u64, u64); +extern u64 HvCall3Ret16(u64, void *, u64, u64, u64); +extern u64 HvCall4Ret16(u64, void *, u64, u64, u64, u64); +extern u64 HvCall5Ret16(u64, void *, u64, u64, u64, u64, u64); +extern u64 HvCall6Ret16(u64, void *, u64, u64, u64, u64, u64, u64); +extern u64 HvCall7Ret16(u64, void *, u64, u64 ,u64 ,u64 ,u64 ,u64 ,u64); + +#endif /* _ASM_POWERPC_ISERIES_HV_CALL_SC_H */ diff --git a/arch/powerpc/include/asm/iseries/hv_call_xm.h b/arch/powerpc/include/asm/iseries/hv_call_xm.h new file mode 100644 index 00000000000..392ac3f54df --- /dev/null +++ b/arch/powerpc/include/asm/iseries/hv_call_xm.h @@ -0,0 +1,61 @@ +/* + * This file contains the "hypervisor call" interface which is used to + * drive the hypervisor from SLIC. + */ +#ifndef _ASM_POWERPC_ISERIES_HV_CALL_XM_H +#define _ASM_POWERPC_ISERIES_HV_CALL_XM_H + +#include +#include + +#define HvCallXmGetTceTableParms HvCallXm + 0 +#define HvCallXmTestBus HvCallXm + 1 +#define HvCallXmConnectBusUnit HvCallXm + 2 +#define HvCallXmLoadTod HvCallXm + 8 +#define HvCallXmTestBusUnit HvCallXm + 9 +#define HvCallXmSetTce HvCallXm + 11 +#define HvCallXmSetTces HvCallXm + 13 + +static inline void HvCallXm_getTceTableParms(u64 cb) +{ + HvCall1(HvCallXmGetTceTableParms, cb); +} + +static inline u64 HvCallXm_setTce(u64 tceTableToken, u64 tceOffset, u64 tce) +{ + return HvCall3(HvCallXmSetTce, tceTableToken, tceOffset, tce); +} + +static inline u64 HvCallXm_setTces(u64 tceTableToken, u64 tceOffset, + u64 numTces, u64 tce1, u64 tce2, u64 tce3, u64 tce4) +{ + return HvCall7(HvCallXmSetTces, tceTableToken, tceOffset, numTces, + tce1, tce2, tce3, tce4); +} + +static inline u64 HvCallXm_testBus(u16 busNumber) +{ + return HvCall1(HvCallXmTestBus, busNumber); +} + +static inline u64 HvCallXm_testBusUnit(u16 busNumber, u8 subBusNumber, + u8 deviceId) +{ + return HvCall2(HvCallXmTestBusUnit, busNumber, + (subBusNumber << 8) | deviceId); +} + +static inline u64 HvCallXm_connectBusUnit(u16 busNumber, u8 subBusNumber, + u8 deviceId, u64 interruptToken) +{ + return HvCall5(HvCallXmConnectBusUnit, busNumber, + (subBusNumber << 8) | deviceId, interruptToken, 0, + 0 /* HvLpConfig::mapDsaToQueueIndex(HvLpDSA(busNumber, xBoard, xCard)) */); +} + +static inline u64 HvCallXm_loadTod(void) +{ + return HvCall0(HvCallXmLoadTod); +} + +#endif /* _ASM_POWERPC_ISERIES_HV_CALL_XM_H */ diff --git a/arch/powerpc/include/asm/iseries/hv_lp_config.h b/arch/powerpc/include/asm/iseries/hv_lp_config.h new file mode 100644 index 00000000000..a006fd1e4a2 --- /dev/null +++ b/arch/powerpc/include/asm/iseries/hv_lp_config.h @@ -0,0 +1,128 @@ +/* + * Copyright (C) 2001 Mike Corrigan IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _ASM_POWERPC_ISERIES_HV_LP_CONFIG_H +#define _ASM_POWERPC_ISERIES_HV_LP_CONFIG_H + +/* + * This file contains the interface to the LPAR configuration data + * to determine which resources should be allocated to each partition. + */ + +#include +#include + +enum { + HvCallCfg_Cur = 0, + HvCallCfg_Init = 1, + HvCallCfg_Max = 2, + HvCallCfg_Min = 3 +}; + +#define HvCallCfgGetSystemPhysicalProcessors HvCallCfg + 6 +#define HvCallCfgGetPhysicalProcessors HvCallCfg + 7 +#define HvCallCfgGetMsChunks HvCallCfg + 9 +#define HvCallCfgGetSharedPoolIndex HvCallCfg + 20 +#define HvCallCfgGetSharedProcUnits HvCallCfg + 21 +#define HvCallCfgGetNumProcsInSharedPool HvCallCfg + 22 +#define HvCallCfgGetVirtualLanIndexMap HvCallCfg + 30 +#define HvCallCfgGetHostingLpIndex HvCallCfg + 32 + +extern HvLpIndex HvLpConfig_getLpIndex_outline(void); +extern HvLpIndex HvLpConfig_getLpIndex(void); +extern HvLpIndex HvLpConfig_getPrimaryLpIndex(void); + +static inline u64 HvLpConfig_getMsChunks(void) +{ + return HvCall2(HvCallCfgGetMsChunks, HvLpConfig_getLpIndex(), + HvCallCfg_Cur); +} + +static inline u64 HvLpConfig_getSystemPhysicalProcessors(void) +{ + return HvCall0(HvCallCfgGetSystemPhysicalProcessors); +} + +static inline u64 HvLpConfig_getNumProcsInSharedPool(HvLpSharedPoolIndex sPI) +{ + return (u16)HvCall1(HvCallCfgGetNumProcsInSharedPool, sPI); +} + +static inline u64 HvLpConfig_getPhysicalProcessors(void) +{ + return HvCall2(HvCallCfgGetPhysicalProcessors, HvLpConfig_getLpIndex(), + HvCallCfg_Cur); +} + +static inline HvLpSharedPoolIndex HvLpConfig_getSharedPoolIndex(void) +{ + return HvCall1(HvCallCfgGetSharedPoolIndex, HvLpConfig_getLpIndex()); +} + +static inline u64 HvLpConfig_getSharedProcUnits(void) +{ + return HvCall2(HvCallCfgGetSharedProcUnits, HvLpConfig_getLpIndex(), + HvCallCfg_Cur); +} + +static inline u64 HvLpConfig_getMaxSharedProcUnits(void) +{ + return HvCall2(HvCallCfgGetSharedProcUnits, HvLpConfig_getLpIndex(), + HvCallCfg_Max); +} + +static inline u64 HvLpConfig_getMaxPhysicalProcessors(void) +{ + return HvCall2(HvCallCfgGetPhysicalProcessors, HvLpConfig_getLpIndex(), + HvCallCfg_Max); +} + +static inline HvLpVirtualLanIndexMap HvLpConfig_getVirtualLanIndexMapForLp( + HvLpIndex lp) +{ + /* + * This is a new function in V5R1 so calls to this on older + * hypervisors will return -1 + */ + u64 retVal = HvCall1(HvCallCfgGetVirtualLanIndexMap, lp); + if (retVal == -1) + retVal = 0; + return retVal; +} + +static inline HvLpVirtualLanIndexMap HvLpConfig_getVirtualLanIndexMap(void) +{ + return HvLpConfig_getVirtualLanIndexMapForLp( + HvLpConfig_getLpIndex_outline()); +} + +static inline int HvLpConfig_doLpsCommunicateOnVirtualLan(HvLpIndex lp1, + HvLpIndex lp2) +{ + HvLpVirtualLanIndexMap virtualLanIndexMap1 = + HvLpConfig_getVirtualLanIndexMapForLp(lp1); + HvLpVirtualLanIndexMap virtualLanIndexMap2 = + HvLpConfig_getVirtualLanIndexMapForLp(lp2); + return ((virtualLanIndexMap1 & virtualLanIndexMap2) != 0); +} + +static inline HvLpIndex HvLpConfig_getHostingLpIndex(HvLpIndex lp) +{ + return HvCall1(HvCallCfgGetHostingLpIndex, lp); +} + +#endif /* _ASM_POWERPC_ISERIES_HV_LP_CONFIG_H */ diff --git a/arch/powerpc/include/asm/iseries/hv_lp_event.h b/arch/powerpc/include/asm/iseries/hv_lp_event.h new file mode 100644 index 00000000000..8f5da7d7720 --- /dev/null +++ b/arch/powerpc/include/asm/iseries/hv_lp_event.h @@ -0,0 +1,162 @@ +/* + * Copyright (C) 2001 Mike Corrigan IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* This file contains the class for HV events in the system. */ + +#ifndef _ASM_POWERPC_ISERIES_HV_LP_EVENT_H +#define _ASM_POWERPC_ISERIES_HV_LP_EVENT_H + +#include +#include +#include +#include + +/* + * HvLpEvent is the structure for Lp Event messages passed between + * partitions through PLIC. + */ + +struct HvLpEvent { + u8 flags; /* Event flags x00-x00 */ + u8 xType; /* Type of message x01-x01 */ + u16 xSubtype; /* Subtype for event x02-x03 */ + u8 xSourceLp; /* Source LP x04-x04 */ + u8 xTargetLp; /* Target LP x05-x05 */ + u8 xSizeMinus1; /* Size of Derived class - 1 x06-x06 */ + u8 xRc; /* RC for Ack flows x07-x07 */ + u16 xSourceInstanceId; /* Source sides instance id x08-x09 */ + u16 xTargetInstanceId; /* Target sides instance id x0A-x0B */ + union { + u32 xSubtypeData; /* Data usable by the subtype x0C-x0F */ + u16 xSubtypeDataShort[2]; /* Data as 2 shorts */ + u8 xSubtypeDataChar[4]; /* Data as 4 chars */ + } x; + + u64 xCorrelationToken; /* Unique value for source/type x10-x17 */ +}; + +typedef void (*LpEventHandler)(struct HvLpEvent *); + +/* Register a handler for an event type - returns 0 on success */ +extern int HvLpEvent_registerHandler(HvLpEvent_Type eventType, + LpEventHandler hdlr); + +/* + * Unregister a handler for an event type + * + * This call will sleep until the handler being removed is guaranteed to + * be no longer executing on any CPU. Do not call with locks held. + * + * returns 0 on success + * Unregister will fail if there are any paths open for the type + */ +extern int HvLpEvent_unregisterHandler(HvLpEvent_Type eventType); + +/* + * Open an Lp Event Path for an event type + * returns 0 on success + * openPath will fail if there is no handler registered for the event type. + * The lpIndex specified is the partition index for the target partition + * (for VirtualIo, VirtualLan and SessionMgr) other types specify zero) + */ +extern int HvLpEvent_openPath(HvLpEvent_Type eventType, HvLpIndex lpIndex); + +/* + * Close an Lp Event Path for a type and partition + * returns 0 on success + */ +extern int HvLpEvent_closePath(HvLpEvent_Type eventType, HvLpIndex lpIndex); + +#define HvLpEvent_Type_Hypervisor 0 +#define HvLpEvent_Type_MachineFac 1 +#define HvLpEvent_Type_SessionMgr 2 +#define HvLpEvent_Type_SpdIo 3 +#define HvLpEvent_Type_VirtualBus 4 +#define HvLpEvent_Type_PciIo 5 +#define HvLpEvent_Type_RioIo 6 +#define HvLpEvent_Type_VirtualLan 7 +#define HvLpEvent_Type_VirtualIo 8 +#define HvLpEvent_Type_NumTypes 9 + +#define HvLpEvent_Rc_Good 0 +#define HvLpEvent_Rc_BufferNotAvailable 1 +#define HvLpEvent_Rc_Cancelled 2 +#define HvLpEvent_Rc_GenericError 3 +#define HvLpEvent_Rc_InvalidAddress 4 +#define HvLpEvent_Rc_InvalidPartition 5 +#define HvLpEvent_Rc_InvalidSize 6 +#define HvLpEvent_Rc_InvalidSubtype 7 +#define HvLpEvent_Rc_InvalidSubtypeData 8 +#define HvLpEvent_Rc_InvalidType 9 +#define HvLpEvent_Rc_PartitionDead 10 +#define HvLpEvent_Rc_PathClosed 11 +#define HvLpEvent_Rc_SubtypeError 12 + +#define HvLpEvent_Function_Ack 0 +#define HvLpEvent_Function_Int 1 + +#define HvLpEvent_AckInd_NoAck 0 +#define HvLpEvent_AckInd_DoAck 1 + +#define HvLpEvent_AckType_ImmediateAck 0 +#define HvLpEvent_AckType_DeferredAck 1 + +#define HV_LP_EVENT_INT 0x01 +#define HV_LP_EVENT_DO_ACK 0x02 +#define HV_LP_EVENT_DEFERRED_ACK 0x04 +#define HV_LP_EVENT_VALID 0x80 + +#define HvLpDma_Direction_LocalToRemote 0 +#define HvLpDma_Direction_RemoteToLocal 1 + +#define HvLpDma_AddressType_TceIndex 0 +#define HvLpDma_AddressType_RealAddress 1 + +#define HvLpDma_Rc_Good 0 +#define HvLpDma_Rc_Error 1 +#define HvLpDma_Rc_PartitionDead 2 +#define HvLpDma_Rc_PathClosed 3 +#define HvLpDma_Rc_InvalidAddress 4 +#define HvLpDma_Rc_InvalidLength 5 + +static inline int hvlpevent_is_valid(struct HvLpEvent *h) +{ + return h->flags & HV_LP_EVENT_VALID; +} + +static inline void hvlpevent_invalidate(struct HvLpEvent *h) +{ + h->flags &= ~ HV_LP_EVENT_VALID; +} + +static inline int hvlpevent_is_int(struct HvLpEvent *h) +{ + return h->flags & HV_LP_EVENT_INT; +} + +static inline int hvlpevent_is_ack(struct HvLpEvent *h) +{ + return !hvlpevent_is_int(h); +} + +static inline int hvlpevent_need_ack(struct HvLpEvent *h) +{ + return h->flags & HV_LP_EVENT_DO_ACK; +} + +#endif /* _ASM_POWERPC_ISERIES_HV_LP_EVENT_H */ diff --git a/arch/powerpc/include/asm/iseries/hv_types.h b/arch/powerpc/include/asm/iseries/hv_types.h new file mode 100644 index 00000000000..c3e6d2a1d1c --- /dev/null +++ b/arch/powerpc/include/asm/iseries/hv_types.h @@ -0,0 +1,112 @@ +/* + * Copyright (C) 2001 Mike Corrigan IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _ASM_POWERPC_ISERIES_HV_TYPES_H +#define _ASM_POWERPC_ISERIES_HV_TYPES_H + +/* + * General typedefs for the hypervisor. + */ + +#include + +typedef u8 HvLpIndex; +typedef u16 HvLpInstanceId; +typedef u64 HvLpTOD; +typedef u64 HvLpSystemSerialNum; +typedef u8 HvLpDeviceSerialNum[12]; +typedef u16 HvLpSanHwSet; +typedef u16 HvLpBus; +typedef u16 HvLpBoard; +typedef u16 HvLpCard; +typedef u8 HvLpDeviceType[4]; +typedef u8 HvLpDeviceModel[3]; +typedef u64 HvIoToken; +typedef u8 HvLpName[8]; +typedef u32 HvIoId; +typedef u64 HvRealMemoryIndex; +typedef u32 HvLpIndexMap; /* Must hold HVMAXARCHITECTEDLPS bits!!! */ +typedef u16 HvLpVrmIndex; +typedef u32 HvXmGenerationId; +typedef u8 HvLpBusPool; +typedef u8 HvLpSharedPoolIndex; +typedef u16 HvLpSharedProcUnitsX100; +typedef u8 HvLpVirtualLanIndex; +typedef u16 HvLpVirtualLanIndexMap; /* Must hold HVMAXARCHITECTEDVIRTUALLANS bits!!! */ +typedef u16 HvBusNumber; /* Hypervisor Bus Number */ +typedef u8 HvSubBusNumber; /* Hypervisor SubBus Number */ +typedef u8 HvAgentId; /* Hypervisor DevFn */ + + +#define HVMAXARCHITECTEDLPS 32 +#define HVMAXARCHITECTEDVIRTUALLANS 16 +#define HVMAXARCHITECTEDVIRTUALDISKS 32 +#define HVMAXARCHITECTEDVIRTUALCDROMS 8 +#define HVMAXARCHITECTEDVIRTUALTAPES 8 +#define HVCHUNKSIZE (256 * 1024) +#define HVPAGESIZE (4 * 1024) +#define HVLPMINMEGSPRIMARY 256 +#define HVLPMINMEGSSECONDARY 64 +#define HVCHUNKSPERMEG 4 +#define HVPAGESPERMEG 256 +#define HVPAGESPERCHUNK 64 + +#define HvLpIndexInvalid ((HvLpIndex)0xff) + +/* + * Enums for the sub-components under PLIC + * Used in HvCall and HvPrimaryCall + */ +enum { + HvCallCompId = 0, + HvCallCpuCtlsCompId = 1, + HvCallCfgCompId = 2, + HvCallEventCompId = 3, + HvCallHptCompId = 4, + HvCallPciCompId = 5, + HvCallSlmCompId = 6, + HvCallSmCompId = 7, + HvCallSpdCompId = 8, + HvCallXmCompId = 9, + HvCallRioCompId = 10, + HvCallRsvd3CompId = 11, + HvCallRsvd2CompId = 12, + HvCallRsvd1CompId = 13, + HvCallMaxCompId = 14, + HvPrimaryCallCompId = 0, + HvPrimaryCallCfgCompId = 1, + HvPrimaryCallPciCompId = 2, + HvPrimaryCallSmCompId = 3, + HvPrimaryCallSpdCompId = 4, + HvPrimaryCallXmCompId = 5, + HvPrimaryCallRioCompId = 6, + HvPrimaryCallRsvd7CompId = 7, + HvPrimaryCallRsvd6CompId = 8, + HvPrimaryCallRsvd5CompId = 9, + HvPrimaryCallRsvd4CompId = 10, + HvPrimaryCallRsvd3CompId = 11, + HvPrimaryCallRsvd2CompId = 12, + HvPrimaryCallRsvd1CompId = 13, + HvPrimaryCallMaxCompId = HvCallMaxCompId +}; + +struct HvLpBufferList { + u64 addr; + u64 len; +}; + +#endif /* _ASM_POWERPC_ISERIES_HV_TYPES_H */ diff --git a/arch/powerpc/include/asm/iseries/iommu.h b/arch/powerpc/include/asm/iseries/iommu.h new file mode 100644 index 00000000000..c59ee7e4bed --- /dev/null +++ b/arch/powerpc/include/asm/iseries/iommu.h @@ -0,0 +1,41 @@ +#ifndef _ASM_POWERPC_ISERIES_IOMMU_H +#define _ASM_POWERPC_ISERIES_IOMMU_H + +/* + * Copyright (C) 2005 Stephen Rothwell, IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the: + * Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, + * Boston, MA 02111-1307 USA + */ + +struct pci_dev; +struct vio_dev; +struct device_node; +struct iommu_table; + +/* Creates table for an individual device node */ +extern void iommu_devnode_init_iSeries(struct pci_dev *pdev, + struct device_node *dn); + +/* Get table parameters from HV */ +extern void iommu_table_getparms_iSeries(unsigned long busno, + unsigned char slotno, unsigned char virtbus, + struct iommu_table *tbl); + +extern struct iommu_table *vio_build_iommu_table_iseries(struct vio_dev *dev); +extern void iommu_vio_init(void); + +#endif /* _ASM_POWERPC_ISERIES_IOMMU_H */ diff --git a/arch/powerpc/include/asm/iseries/it_lp_queue.h b/arch/powerpc/include/asm/iseries/it_lp_queue.h new file mode 100644 index 00000000000..42827883882 --- /dev/null +++ b/arch/powerpc/include/asm/iseries/it_lp_queue.h @@ -0,0 +1,78 @@ +/* + * Copyright (C) 2001 Mike Corrigan IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _ASM_POWERPC_ISERIES_IT_LP_QUEUE_H +#define _ASM_POWERPC_ISERIES_IT_LP_QUEUE_H + +/* + * This control block defines the simple LP queue structure that is + * shared between the hypervisor (PLIC) and the OS in order to send + * events to an LP. + */ + +#include +#include + +#define IT_LP_MAX_QUEUES 8 + +#define IT_LP_NOT_USED 0 /* Queue will not be used by PLIC */ +#define IT_LP_DEDICATED_IO 1 /* Queue dedicated to IO processor specified */ +#define IT_LP_DEDICATED_LP 2 /* Queue dedicated to LP specified */ +#define IT_LP_SHARED 3 /* Queue shared for both IO and LP */ + +#define IT_LP_EVENT_STACK_SIZE 4096 +#define IT_LP_EVENT_MAX_SIZE 256 +#define IT_LP_EVENT_ALIGN 64 + +struct hvlpevent_queue { +/* + * The hq_current_event is the pointer to the next event stack entry + * that will become valid. The OS must peek at this entry to determine + * if it is valid. PLIC will set the valid indicator as the very last + * store into that entry. + * + * When the OS has completed processing of the event then it will mark + * the event as invalid so that PLIC knows it can store into that event + * location again. + * + * If the event stack fills and there are overflow events, then PLIC + * will set the hq_overflow_pending flag in which case the OS will + * have to fetch the additional LP events once they have drained the + * event stack. + * + * The first 16-bytes are known by both the OS and PLIC. The remainder + * of the cache line is for use by the OS. + */ + u8 hq_overflow_pending; /* 0x00 Overflow events are pending */ + u8 hq_status; /* 0x01 DedicatedIo or DedicatedLp or NotUsed */ + u16 hq_proc_index; /* 0x02 Logical Proc Index for correlation */ + u8 hq_reserved1[12]; /* 0x04 */ + char *hq_current_event; /* 0x10 */ + char *hq_last_event; /* 0x18 */ + char *hq_event_stack; /* 0x20 */ + u8 hq_index; /* 0x28 unique sequential index. */ + u8 hq_reserved2[3]; /* 0x29-2b */ + spinlock_t hq_lock; +}; + +extern struct hvlpevent_queue hvlpevent_queue; + +extern int hvlpevent_is_pending(void); +extern void process_hvlpevents(void); +extern void setup_hvlpevent_queue(void); + +#endif /* _ASM_POWERPC_ISERIES_IT_LP_QUEUE_H */ diff --git a/arch/powerpc/include/asm/iseries/lpar_map.h b/arch/powerpc/include/asm/iseries/lpar_map.h new file mode 100644 index 00000000000..5e9f3e128ee --- /dev/null +++ b/arch/powerpc/include/asm/iseries/lpar_map.h @@ -0,0 +1,85 @@ +/* + * Copyright (C) 2001 Mike Corrigan IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _ASM_POWERPC_ISERIES_LPAR_MAP_H +#define _ASM_POWERPC_ISERIES_LPAR_MAP_H + +#ifndef __ASSEMBLY__ + +#include + +#endif + +/* + * The iSeries hypervisor will set up mapping for one or more + * ESID/VSID pairs (in SLB/segment registers) and will set up + * mappings of one or more ranges of pages to VAs. + * We will have the hypervisor set up the ESID->VSID mapping + * for the four kernel segments (C-F). With shared processors, + * the hypervisor will clear all segment registers and reload + * these four whenever the processor is switched from one + * partition to another. + */ + +/* The Vsid and Esid identified below will be used by the hypervisor + * to set up a memory mapping for part of the load area before giving + * control to the Linux kernel. The load area is 64 MB, but this must + * not attempt to map the whole load area. The Hashed Page Table may + * need to be located within the load area (if the total partition size + * is 64 MB), but cannot be mapped. Typically, this should specify + * to map half (32 MB) of the load area. + * + * The hypervisor will set up page table entries for the number of + * pages specified. + * + * In 32-bit mode, the hypervisor will load all four of the + * segment registers (identified by the low-order four bits of the + * Esid field. In 64-bit mode, the hypervisor will load one SLB + * entry to map the Esid to the Vsid. +*/ + +#define HvEsidsToMap 2 +#define HvRangesToMap 1 + +/* Hypervisor initially maps 32MB of the load area */ +#define HvPagesToMap 8192 + +#ifndef __ASSEMBLY__ +struct LparMap { + u64 xNumberEsids; // Number of ESID/VSID pairs + u64 xNumberRanges; // Number of VA ranges to map + u64 xSegmentTableOffs; // Page number within load area of seg table + u64 xRsvd[5]; + struct { + u64 xKernelEsid; // Esid used to map kernel load + u64 xKernelVsid; // Vsid used to map kernel load + } xEsids[HvEsidsToMap]; + struct { + u64 xPages; // Number of pages to be mapped + u64 xOffset; // Offset from start of load area + u64 xVPN; // Virtual Page Number + } xRanges[HvRangesToMap]; +}; + +extern const struct LparMap xLparMap; + +#endif /* __ASSEMBLY__ */ + +/* the fixed address where the LparMap exists */ +#define LPARMAP_PHYS 0x7000 + +#endif /* _ASM_POWERPC_ISERIES_LPAR_MAP_H */ diff --git a/arch/powerpc/include/asm/iseries/mf.h b/arch/powerpc/include/asm/iseries/mf.h new file mode 100644 index 00000000000..eb851a9c9e5 --- /dev/null +++ b/arch/powerpc/include/asm/iseries/mf.h @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2001 Troy D. Armstrong IBM Corporation + * Copyright (C) 2004 Stephen Rothwell IBM Corporation + * + * This modules exists as an interface between a Linux secondary partition + * running on an iSeries and the primary partition's Virtual Service + * Processor (VSP) object. The VSP has final authority over powering on/off + * all partitions in the iSeries. It also provides miscellaneous low-level + * machine facility type operations. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _ASM_POWERPC_ISERIES_MF_H +#define _ASM_POWERPC_ISERIES_MF_H + +#include + +#include +#include + +struct rtc_time; + +typedef void (*MFCompleteHandler)(void *clientToken, int returnCode); + +extern void mf_allocate_lp_events(HvLpIndex targetLp, HvLpEvent_Type type, + unsigned size, unsigned amount, MFCompleteHandler hdlr, + void *userToken); +extern void mf_deallocate_lp_events(HvLpIndex targetLp, HvLpEvent_Type type, + unsigned count, MFCompleteHandler hdlr, void *userToken); + +extern void mf_power_off(void); +extern void mf_reboot(char *cmd); + +extern void mf_display_src(u32 word); +extern void mf_display_progress(u16 value); + +extern void mf_init(void); + +#endif /* _ASM_POWERPC_ISERIES_MF_H */ diff --git a/arch/powerpc/include/asm/iseries/vio.h b/arch/powerpc/include/asm/iseries/vio.h new file mode 100644 index 00000000000..f9ac0d00b95 --- /dev/null +++ b/arch/powerpc/include/asm/iseries/vio.h @@ -0,0 +1,265 @@ +/* -*- linux-c -*- + * + * iSeries Virtual I/O Message Path header + * + * Authors: Dave Boutcher + * Ryan Arnold + * Colin Devilbiss + * + * (C) Copyright 2000 IBM Corporation + * + * This header file is used by the iSeries virtual I/O device + * drivers. It defines the interfaces to the common functions + * (implemented in drivers/char/viopath.h) as well as defining + * common functions and structures. Currently (at the time I + * wrote this comment) the iSeries virtual I/O device drivers + * that use this are + * drivers/block/viodasd.c + * drivers/char/viocons.c + * drivers/char/viotape.c + * drivers/cdrom/viocd.c + * + * The iSeries virtual ethernet support (veth.c) uses a whole + * different set of functions. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) anyu later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#ifndef _ASM_POWERPC_ISERIES_VIO_H +#define _ASM_POWERPC_ISERIES_VIO_H + +#include +#include + +/* + * iSeries virtual I/O events use the subtype field in + * HvLpEvent to figure out what kind of vio event is coming + * in. We use a table to route these, and this defines + * the maximum number of distinct subtypes + */ +#define VIO_MAX_SUBTYPES 8 + +#define VIOMAXBLOCKDMA 12 + +struct open_data { + u64 disk_size; + u16 max_disk; + u16 cylinders; + u16 tracks; + u16 sectors; + u16 bytes_per_sector; +}; + +struct rw_data { + u64 offset; + struct { + u32 token; + u32 reserved; + u64 len; + } dma_info[VIOMAXBLOCKDMA]; +}; + +struct vioblocklpevent { + struct HvLpEvent event; + u32 reserved; + u16 version; + u16 sub_result; + u16 disk; + u16 flags; + union { + struct open_data open_data; + struct rw_data rw_data; + u64 changed; + } u; +}; + +#define vioblockflags_ro 0x0001 + +enum vioblocksubtype { + vioblockopen = 0x0001, + vioblockclose = 0x0002, + vioblockread = 0x0003, + vioblockwrite = 0x0004, + vioblockflush = 0x0005, + vioblockcheck = 0x0007 +}; + +struct viocdlpevent { + struct HvLpEvent event; + u32 reserved; + u16 version; + u16 sub_result; + u16 disk; + u16 flags; + u32 token; + u64 offset; /* On open, max number of disks */ + u64 len; /* On open, size of the disk */ + u32 block_size; /* Only set on open */ + u32 media_size; /* Only set on open */ +}; + +enum viocdsubtype { + viocdopen = 0x0001, + viocdclose = 0x0002, + viocdread = 0x0003, + viocdwrite = 0x0004, + viocdlockdoor = 0x0005, + viocdgetinfo = 0x0006, + viocdcheck = 0x0007 +}; + +struct viotapelpevent { + struct HvLpEvent event; + u32 reserved; + u16 version; + u16 sub_type_result; + u16 tape; + u16 flags; + u32 token; + u64 len; + union { + struct { + u32 tape_op; + u32 count; + } op; + struct { + u32 type; + u32 resid; + u32 dsreg; + u32 gstat; + u32 erreg; + u32 file_no; + u32 block_no; + } get_status; + struct { + u32 block_no; + } get_pos; + } u; +}; + +enum viotapesubtype { + viotapeopen = 0x0001, + viotapeclose = 0x0002, + viotaperead = 0x0003, + viotapewrite = 0x0004, + viotapegetinfo = 0x0005, + viotapeop = 0x0006, + viotapegetpos = 0x0007, + viotapesetpos = 0x0008, + viotapegetstatus = 0x0009 +}; + +/* + * Each subtype can register a handler to process their events. + * The handler must have this interface. + */ +typedef void (vio_event_handler_t) (struct HvLpEvent * event); + +extern int viopath_open(HvLpIndex remoteLp, int subtype, int numReq); +extern int viopath_close(HvLpIndex remoteLp, int subtype, int numReq); +extern int vio_setHandler(int subtype, vio_event_handler_t * beh); +extern int vio_clearHandler(int subtype); +extern int viopath_isactive(HvLpIndex lp); +extern HvLpInstanceId viopath_sourceinst(HvLpIndex lp); +extern HvLpInstanceId viopath_targetinst(HvLpIndex lp); +extern void vio_set_hostlp(void); +extern void *vio_get_event_buffer(int subtype); +extern void vio_free_event_buffer(int subtype, void *buffer); + +extern struct vio_dev *vio_create_viodasd(u32 unit); + +extern HvLpIndex viopath_hostLp; +extern HvLpIndex viopath_ourLp; + +#define VIOCHAR_MAX_DATA 200 + +#define VIOMAJOR_SUBTYPE_MASK 0xff00 +#define VIOMINOR_SUBTYPE_MASK 0x00ff +#define VIOMAJOR_SUBTYPE_SHIFT 8 + +#define VIOVERSION 0x0101 + +/* + * This is the general structure for VIO errors; each module should have + * a table of them, and each table should be terminated by an entry of + * { 0, 0, NULL }. Then, to find a specific error message, a module + * should pass its local table and the return code. + */ +struct vio_error_entry { + u16 rc; + int errno; + const char *msg; +}; +extern const struct vio_error_entry *vio_lookup_rc( + const struct vio_error_entry *local_table, u16 rc); + +enum viosubtypes { + viomajorsubtype_monitor = 0x0100, + viomajorsubtype_blockio = 0x0200, + viomajorsubtype_chario = 0x0300, + viomajorsubtype_config = 0x0400, + viomajorsubtype_cdio = 0x0500, + viomajorsubtype_tape = 0x0600, + viomajorsubtype_scsi = 0x0700 +}; + +enum vioconfigsubtype { + vioconfigget = 0x0001, +}; + +enum viorc { + viorc_good = 0x0000, + viorc_noConnection = 0x0001, + viorc_noReceiver = 0x0002, + viorc_noBufferAvailable = 0x0003, + viorc_invalidMessageType = 0x0004, + viorc_invalidRange = 0x0201, + viorc_invalidToken = 0x0202, + viorc_DMAError = 0x0203, + viorc_useError = 0x0204, + viorc_releaseError = 0x0205, + viorc_invalidDisk = 0x0206, + viorc_openRejected = 0x0301 +}; + +/* + * The structure of the events that flow between us and OS/400 for chario + * events. You can't mess with this unless the OS/400 side changes too. + */ +struct viocharlpevent { + struct HvLpEvent event; + u32 reserved; + u16 version; + u16 subtype_result_code; + u8 virtual_device; + u8 len; + u8 data[VIOCHAR_MAX_DATA]; +}; + +#define VIOCHAR_WINDOW 10 + +enum viocharsubtype { + viocharopen = 0x0001, + viocharclose = 0x0002, + viochardata = 0x0003, + viocharack = 0x0004, + viocharconfig = 0x0005 +}; + +enum viochar_rc { + viochar_rc_ebusy = 1 +}; + +#endif /* _ASM_POWERPC_ISERIES_VIO_H */ diff --git a/arch/powerpc/include/asm/kdebug.h b/arch/powerpc/include/asm/kdebug.h new file mode 100644 index 00000000000..ae6d206728a --- /dev/null +++ b/arch/powerpc/include/asm/kdebug.h @@ -0,0 +1,15 @@ +#ifndef _ASM_POWERPC_KDEBUG_H +#define _ASM_POWERPC_KDEBUG_H +#ifdef __KERNEL__ + +/* Grossly misnamed. */ +enum die_val { + DIE_OOPS = 1, + DIE_IABR_MATCH, + DIE_DABR_MATCH, + DIE_BPT, + DIE_SSTEP, +}; + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_KDEBUG_H */ diff --git a/arch/powerpc/include/asm/kdump.h b/arch/powerpc/include/asm/kdump.h new file mode 100644 index 00000000000..f6c93c71689 --- /dev/null +++ b/arch/powerpc/include/asm/kdump.h @@ -0,0 +1,35 @@ +#ifndef _PPC64_KDUMP_H +#define _PPC64_KDUMP_H + +/* Kdump kernel runs at 32 MB, change at your peril. */ +#define KDUMP_KERNELBASE 0x2000000 + +/* How many bytes to reserve at zero for kdump. The reserve limit should + * be greater or equal to the trampoline's end address. + * Reserve to the end of the FWNMI area, see head_64.S */ +#define KDUMP_RESERVE_LIMIT 0x10000 /* 64K */ + +#ifdef CONFIG_CRASH_DUMP + +#define KDUMP_TRAMPOLINE_START 0x0100 +#define KDUMP_TRAMPOLINE_END 0x3000 + +#define KDUMP_MIN_TCE_ENTRIES 2048 + +#endif /* CONFIG_CRASH_DUMP */ + +#ifndef __ASSEMBLY__ +#ifdef CONFIG_CRASH_DUMP + +extern void reserve_kdump_trampoline(void); +extern void setup_kdump_trampoline(void); + +#else /* !CONFIG_CRASH_DUMP */ + +static inline void reserve_kdump_trampoline(void) { ; } +static inline void setup_kdump_trampoline(void) { ; } + +#endif /* CONFIG_CRASH_DUMP */ +#endif /* __ASSEMBLY__ */ + +#endif /* __PPC64_KDUMP_H */ diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h new file mode 100644 index 00000000000..acdcdc66f1b --- /dev/null +++ b/arch/powerpc/include/asm/kexec.h @@ -0,0 +1,160 @@ +#ifndef _ASM_POWERPC_KEXEC_H +#define _ASM_POWERPC_KEXEC_H +#ifdef __KERNEL__ + +/* + * Maximum page that is mapped directly into kernel memory. + * XXX: Since we copy virt we can use any page we allocate + */ +#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL) + +/* + * Maximum address we can reach in physical address mode. + * XXX: I want to allow initrd in highmem. Otherwise set to rmo on LPAR. + */ +#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL) + +/* Maximum address we can use for the control code buffer */ +#ifdef __powerpc64__ +#define KEXEC_CONTROL_MEMORY_LIMIT (-1UL) +#else +/* TASK_SIZE, probably left over from use_mm ?? */ +#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE +#endif + +#define KEXEC_CONTROL_CODE_SIZE 4096 + +/* The native architecture */ +#ifdef __powerpc64__ +#define KEXEC_ARCH KEXEC_ARCH_PPC64 +#else +#define KEXEC_ARCH KEXEC_ARCH_PPC +#endif + +#ifndef __ASSEMBLY__ +#include + +typedef void (*crash_shutdown_t)(void); + +#ifdef CONFIG_KEXEC + +#ifdef __powerpc64__ +/* + * This function is responsible for capturing register states if coming + * via panic or invoking dump using sysrq-trigger. + */ +static inline void crash_setup_regs(struct pt_regs *newregs, + struct pt_regs *oldregs) +{ + if (oldregs) + memcpy(newregs, oldregs, sizeof(*newregs)); + else { + /* FIXME Merge this with xmon_save_regs ?? */ + unsigned long tmp1, tmp2; + __asm__ __volatile__ ( + "std 0,0(%2)\n" + "std 1,8(%2)\n" + "std 2,16(%2)\n" + "std 3,24(%2)\n" + "std 4,32(%2)\n" + "std 5,40(%2)\n" + "std 6,48(%2)\n" + "std 7,56(%2)\n" + "std 8,64(%2)\n" + "std 9,72(%2)\n" + "std 10,80(%2)\n" + "std 11,88(%2)\n" + "std 12,96(%2)\n" + "std 13,104(%2)\n" + "std 14,112(%2)\n" + "std 15,120(%2)\n" + "std 16,128(%2)\n" + "std 17,136(%2)\n" + "std 18,144(%2)\n" + "std 19,152(%2)\n" + "std 20,160(%2)\n" + "std 21,168(%2)\n" + "std 22,176(%2)\n" + "std 23,184(%2)\n" + "std 24,192(%2)\n" + "std 25,200(%2)\n" + "std 26,208(%2)\n" + "std 27,216(%2)\n" + "std 28,224(%2)\n" + "std 29,232(%2)\n" + "std 30,240(%2)\n" + "std 31,248(%2)\n" + "mfmsr %0\n" + "std %0, 264(%2)\n" + "mfctr %0\n" + "std %0, 280(%2)\n" + "mflr %0\n" + "std %0, 288(%2)\n" + "bl 1f\n" + "1: mflr %1\n" + "std %1, 256(%2)\n" + "mtlr %0\n" + "mfxer %0\n" + "std %0, 296(%2)\n" + : "=&r" (tmp1), "=&r" (tmp2) + : "b" (newregs) + : "memory"); + } +} +#else +/* + * Provide a dummy definition to avoid build failures. Will remain + * empty till crash dump support is enabled. + */ +static inline void crash_setup_regs(struct pt_regs *newregs, + struct pt_regs *oldregs) { } +#endif /* !__powerpc64 __ */ + +extern void kexec_smp_wait(void); /* get and clear naca physid, wait for + master to copy new code to 0 */ +extern int crashing_cpu; +extern void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *)); +extern cpumask_t cpus_in_sr; +static inline int kexec_sr_activated(int cpu) +{ + return cpu_isset(cpu,cpus_in_sr); +} + +struct kimage; +struct pt_regs; +extern void default_machine_kexec(struct kimage *image); +extern int default_machine_kexec_prepare(struct kimage *image); +extern void default_machine_crash_shutdown(struct pt_regs *regs); +extern int crash_shutdown_register(crash_shutdown_t handler); +extern int crash_shutdown_unregister(crash_shutdown_t handler); + +extern void machine_kexec_simple(struct kimage *image); +extern void crash_kexec_secondary(struct pt_regs *regs); +extern int overlaps_crashkernel(unsigned long start, unsigned long size); +extern void reserve_crashkernel(void); + +#else /* !CONFIG_KEXEC */ +static inline int kexec_sr_activated(int cpu) { return 0; } +static inline void crash_kexec_secondary(struct pt_regs *regs) { } + +static inline int overlaps_crashkernel(unsigned long start, unsigned long size) +{ + return 0; +} + +static inline void reserve_crashkernel(void) { ; } + +static inline int crash_shutdown_register(crash_shutdown_t handler) +{ + return 0; +} + +static inline int crash_shutdown_unregister(crash_shutdown_t handler) +{ + return 0; +} + +#endif /* CONFIG_KEXEC */ +#endif /* ! __ASSEMBLY__ */ +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_KEXEC_H */ diff --git a/arch/powerpc/include/asm/keylargo.h b/arch/powerpc/include/asm/keylargo.h new file mode 100644 index 00000000000..d8520ef121f --- /dev/null +++ b/arch/powerpc/include/asm/keylargo.h @@ -0,0 +1,261 @@ +#ifndef _ASM_POWERPC_KEYLARGO_H +#define _ASM_POWERPC_KEYLARGO_H +#ifdef __KERNEL__ +/* + * keylargo.h: definitions for using the "KeyLargo" I/O controller chip. + * + */ + +/* "Pangea" chipset has keylargo device-id 0x25 while core99 + * has device-id 0x22. The rev. of the pangea one is 0, so we + * fake an artificial rev. in keylargo_rev by oring 0x100 + */ +#define KL_PANGEA_REV 0x100 + +/* offset from base for feature control registers */ +#define KEYLARGO_MBCR 0x34 /* KL Only, Media bay control/status */ +#define KEYLARGO_FCR0 0x38 +#define KEYLARGO_FCR1 0x3c +#define KEYLARGO_FCR2 0x40 +#define KEYLARGO_FCR3 0x44 +#define KEYLARGO_FCR4 0x48 +#define KEYLARGO_FCR5 0x4c /* Pangea only */ + +/* K2 aditional FCRs */ +#define K2_FCR6 0x34 +#define K2_FCR7 0x30 +#define K2_FCR8 0x2c +#define K2_FCR9 0x28 +#define K2_FCR10 0x24 + +/* GPIO registers */ +#define KEYLARGO_GPIO_LEVELS0 0x50 +#define KEYLARGO_GPIO_LEVELS1 0x54 +#define KEYLARGO_GPIO_EXTINT_0 0x58 +#define KEYLARGO_GPIO_EXTINT_CNT 18 +#define KEYLARGO_GPIO_0 0x6A +#define KEYLARGO_GPIO_CNT 17 +#define KEYLARGO_GPIO_EXTINT_DUAL_EDGE 0x80 +#define KEYLARGO_GPIO_OUTPUT_ENABLE 0x04 +#define KEYLARGO_GPIO_OUTOUT_DATA 0x01 +#define KEYLARGO_GPIO_INPUT_DATA 0x02 + +/* K2 does only extint GPIOs and does 51 of them */ +#define K2_GPIO_EXTINT_0 0x58 +#define K2_GPIO_EXTINT_CNT 51 + +/* Specific GPIO regs */ + +#define KL_GPIO_MODEM_RESET (KEYLARGO_GPIO_0+0x03) +#define KL_GPIO_MODEM_POWER (KEYLARGO_GPIO_0+0x02) /* Pangea */ + +#define KL_GPIO_SOUND_POWER (KEYLARGO_GPIO_0+0x05) + +/* Hrm... this one is only to be used on Pismo. It seeem to also + * control the timebase enable on other machines. Still to be + * experimented... --BenH. + */ +#define KL_GPIO_FW_CABLE_POWER (KEYLARGO_GPIO_0+0x09) +#define KL_GPIO_TB_ENABLE (KEYLARGO_GPIO_0+0x09) + +#define KL_GPIO_ETH_PHY_RESET (KEYLARGO_GPIO_0+0x10) + +#define KL_GPIO_EXTINT_CPU1 (KEYLARGO_GPIO_0+0x0a) +#define KL_GPIO_EXTINT_CPU1_ASSERT 0x04 +#define KL_GPIO_EXTINT_CPU1_RELEASE 0x38 + +#define KL_GPIO_RESET_CPU0 (KEYLARGO_GPIO_EXTINT_0+0x03) +#define KL_GPIO_RESET_CPU1 (KEYLARGO_GPIO_EXTINT_0+0x04) +#define KL_GPIO_RESET_CPU2 (KEYLARGO_GPIO_EXTINT_0+0x0f) +#define KL_GPIO_RESET_CPU3 (KEYLARGO_GPIO_EXTINT_0+0x10) + +#define KL_GPIO_PMU_MESSAGE_IRQ (KEYLARGO_GPIO_EXTINT_0+0x09) +#define KL_GPIO_PMU_MESSAGE_BIT KEYLARGO_GPIO_INPUT_DATA + +#define KL_GPIO_MEDIABAY_IRQ (KEYLARGO_GPIO_EXTINT_0+0x0e) + +#define KL_GPIO_AIRPORT_0 (KEYLARGO_GPIO_EXTINT_0+0x0a) +#define KL_GPIO_AIRPORT_1 (KEYLARGO_GPIO_EXTINT_0+0x0d) +#define KL_GPIO_AIRPORT_2 (KEYLARGO_GPIO_0+0x0d) +#define KL_GPIO_AIRPORT_3 (KEYLARGO_GPIO_0+0x0e) +#define KL_GPIO_AIRPORT_4 (KEYLARGO_GPIO_0+0x0f) + +/* + * Bits in feature control register. Those bits different for K2 are + * listed separately + */ +#define KL_MBCR_MB0_PCI_ENABLE 0x00000800 /* exist ? */ +#define KL_MBCR_MB0_IDE_ENABLE 0x00001000 +#define KL_MBCR_MB0_FLOPPY_ENABLE 0x00002000 /* exist ? */ +#define KL_MBCR_MB0_SOUND_ENABLE 0x00004000 /* hrm... */ +#define KL_MBCR_MB0_DEV_MASK 0x00007800 +#define KL_MBCR_MB0_DEV_POWER 0x00000400 +#define KL_MBCR_MB0_DEV_RESET 0x00000200 +#define KL_MBCR_MB0_ENABLE 0x00000100 +#define KL_MBCR_MB1_PCI_ENABLE 0x08000000 /* exist ? */ +#define KL_MBCR_MB1_IDE_ENABLE 0x10000000 +#define KL_MBCR_MB1_FLOPPY_ENABLE 0x20000000 /* exist ? */ +#define KL_MBCR_MB1_SOUND_ENABLE 0x40000000 /* hrm... */ +#define KL_MBCR_MB1_DEV_MASK 0x78000000 +#define KL_MBCR_MB1_DEV_POWER 0x04000000 +#define KL_MBCR_MB1_DEV_RESET 0x02000000 +#define KL_MBCR_MB1_ENABLE 0x01000000 + +#define KL0_SCC_B_INTF_ENABLE 0x00000001 /* (KL Only) */ +#define KL0_SCC_A_INTF_ENABLE 0x00000002 +#define KL0_SCC_SLOWPCLK 0x00000004 +#define KL0_SCC_RESET 0x00000008 +#define KL0_SCCA_ENABLE 0x00000010 +#define KL0_SCCB_ENABLE 0x00000020 +#define KL0_SCC_CELL_ENABLE 0x00000040 +#define KL0_IRDA_HIGH_BAND 0x00000100 /* (KL Only) */ +#define KL0_IRDA_SOURCE2_SEL 0x00000200 /* (KL Only) */ +#define KL0_IRDA_SOURCE1_SEL 0x00000400 /* (KL Only) */ +#define KL0_PG_USB0_PMI_ENABLE 0x00000400 /* (Pangea/Intrepid Only) */ +#define KL0_IRDA_RESET 0x00000800 /* (KL Only) */ +#define KL0_PG_USB0_REF_SUSPEND_SEL 0x00000800 /* (Pangea/Intrepid Only) */ +#define KL0_IRDA_DEFAULT1 0x00001000 /* (KL Only) */ +#define KL0_PG_USB0_REF_SUSPEND 0x00001000 /* (Pangea/Intrepid Only) */ +#define KL0_IRDA_DEFAULT0 0x00002000 /* (KL Only) */ +#define KL0_PG_USB0_PAD_SUSPEND 0x00002000 /* (Pangea/Intrepid Only) */ +#define KL0_IRDA_FAST_CONNECT 0x00004000 /* (KL Only) */ +#define KL0_PG_USB1_PMI_ENABLE 0x00004000 /* (Pangea/Intrepid Only) */ +#define KL0_IRDA_ENABLE 0x00008000 /* (KL Only) */ +#define KL0_PG_USB1_REF_SUSPEND_SEL 0x00008000 /* (Pangea/Intrepid Only) */ +#define KL0_IRDA_CLK32_ENABLE 0x00010000 /* (KL Only) */ +#define KL0_PG_USB1_REF_SUSPEND 0x00010000 /* (Pangea/Intrepid Only) */ +#define KL0_IRDA_CLK19_ENABLE 0x00020000 /* (KL Only) */ +#define KL0_PG_USB1_PAD_SUSPEND 0x00020000 /* (Pangea/Intrepid Only) */ +#define KL0_USB0_PAD_SUSPEND0 0x00040000 +#define KL0_USB0_PAD_SUSPEND1 0x00080000 +#define KL0_USB0_CELL_ENABLE 0x00100000 +#define KL0_USB1_PAD_SUSPEND0 0x00400000 +#define KL0_USB1_PAD_SUSPEND1 0x00800000 +#define KL0_USB1_CELL_ENABLE 0x01000000 +#define KL0_USB_REF_SUSPEND 0x10000000 /* (KL Only) */ + +#define KL0_SERIAL_ENABLE (KL0_SCC_B_INTF_ENABLE | \ + KL0_SCC_SLOWPCLK | \ + KL0_SCC_CELL_ENABLE | KL0_SCCA_ENABLE) + +#define KL1_USB2_PMI_ENABLE 0x00000001 /* Intrepid only */ +#define KL1_AUDIO_SEL_22MCLK 0x00000002 /* KL/Pangea only */ +#define KL1_USB2_REF_SUSPEND_SEL 0x00000002 /* Intrepid only */ +#define KL1_USB2_REF_SUSPEND 0x00000004 /* Intrepid only */ +#define KL1_AUDIO_CLK_ENABLE_BIT 0x00000008 /* KL/Pangea only */ +#define KL1_USB2_PAD_SUSPEND_SEL 0x00000008 /* Intrepid only */ +#define KL1_USB2_PAD_SUSPEND0 0x00000010 /* Intrepid only */ +#define KL1_AUDIO_CLK_OUT_ENABLE 0x00000020 /* KL/Pangea only */ +#define KL1_USB2_PAD_SUSPEND1 0x00000020 /* Intrepid only */ +#define KL1_AUDIO_CELL_ENABLE 0x00000040 /* KL/Pangea only */ +#define KL1_USB2_CELL_ENABLE 0x00000040 /* Intrepid only */ +#define KL1_AUDIO_CHOOSE 0x00000080 /* KL/Pangea only */ +#define KL1_I2S0_CHOOSE 0x00000200 /* KL Only */ +#define KL1_I2S0_CELL_ENABLE 0x00000400 +#define KL1_I2S0_CLK_ENABLE_BIT 0x00001000 +#define KL1_I2S0_ENABLE 0x00002000 +#define KL1_I2S1_CELL_ENABLE 0x00020000 +#define KL1_I2S1_CLK_ENABLE_BIT 0x00080000 +#define KL1_I2S1_ENABLE 0x00100000 +#define KL1_EIDE0_ENABLE 0x00800000 /* KL/Intrepid Only */ +#define KL1_EIDE0_RESET_N 0x01000000 /* KL/Intrepid Only */ +#define KL1_EIDE1_ENABLE 0x04000000 /* KL Only */ +#define KL1_EIDE1_RESET_N 0x08000000 /* KL Only */ +#define KL1_UIDE_ENABLE 0x20000000 /* KL/Pangea Only */ +#define KL1_UIDE_RESET_N 0x40000000 /* KL/Pangea Only */ + +#define KL2_IOBUS_ENABLE 0x00000002 +#define KL2_SLEEP_STATE_BIT 0x00000100 /* KL Only */ +#define KL2_PG_STOP_ALL_CLOCKS 0x00000100 /* Pangea Only */ +#define KL2_MPIC_ENABLE 0x00020000 +#define KL2_CARDSLOT_RESET 0x00040000 /* Pangea/Intrepid Only */ +#define KL2_ALT_DATA_OUT 0x02000000 /* KL Only ??? */ +#define KL2_MEM_IS_BIG 0x04000000 +#define KL2_CARDSEL_16 0x08000000 + +#define KL3_SHUTDOWN_PLL_TOTAL 0x00000001 /* KL/Pangea only */ +#define KL3_SHUTDOWN_PLLKW6 0x00000002 /* KL/Pangea only */ +#define KL3_IT_SHUTDOWN_PLL3 0x00000002 /* Intrepid only */ +#define KL3_SHUTDOWN_PLLKW4 0x00000004 /* KL/Pangea only */ +#define KL3_IT_SHUTDOWN_PLL2 0x00000004 /* Intrepid only */ +#define KL3_SHUTDOWN_PLLKW35 0x00000008 /* KL/Pangea only */ +#define KL3_IT_SHUTDOWN_PLL1 0x00000008 /* Intrepid only */ +#define KL3_SHUTDOWN_PLLKW12 0x00000010 /* KL Only */ +#define KL3_IT_ENABLE_PLL3_SHUTDOWN 0x00000010 /* Intrepid only */ +#define KL3_PLL_RESET 0x00000020 /* KL/Pangea only */ +#define KL3_IT_ENABLE_PLL2_SHUTDOWN 0x00000020 /* Intrepid only */ +#define KL3_IT_ENABLE_PLL1_SHUTDOWN 0x00000010 /* Intrepid only */ +#define KL3_SHUTDOWN_PLL2X 0x00000080 /* KL Only */ +#define KL3_CLK66_ENABLE 0x00000100 /* KL Only */ +#define KL3_CLK49_ENABLE 0x00000200 +#define KL3_CLK45_ENABLE 0x00000400 +#define KL3_CLK31_ENABLE 0x00000800 /* KL/Pangea only */ +#define KL3_TIMER_CLK18_ENABLE 0x00001000 +#define KL3_I2S1_CLK18_ENABLE 0x00002000 +#define KL3_I2S0_CLK18_ENABLE 0x00004000 +#define KL3_VIA_CLK16_ENABLE 0x00008000 /* KL/Pangea only */ +#define KL3_IT_VIA_CLK32_ENABLE 0x00008000 /* Intrepid only */ +#define KL3_STOPPING33_ENABLED 0x00080000 /* KL Only */ +#define KL3_PG_PLL_ENABLE_TEST 0x00080000 /* Pangea Only */ + +/* Intrepid USB bus 2, port 0,1 */ +#define KL3_IT_PORT_WAKEUP_ENABLE(p) (0x00080000 << ((p)<<3)) +#define KL3_IT_PORT_RESUME_WAKE_EN(p) (0x00040000 << ((p)<<3)) +#define KL3_IT_PORT_CONNECT_WAKE_EN(p) (0x00020000 << ((p)<<3)) +#define KL3_IT_PORT_DISCONNECT_WAKE_EN(p) (0x00010000 << ((p)<<3)) +#define KL3_IT_PORT_RESUME_STAT(p) (0x00300000 << ((p)<<3)) +#define KL3_IT_PORT_CONNECT_STAT(p) (0x00200000 << ((p)<<3)) +#define KL3_IT_PORT_DISCONNECT_STAT(p) (0x00100000 << ((p)<<3)) + +/* Port 0,1 : bus 0, port 2,3 : bus 1 */ +#define KL4_PORT_WAKEUP_ENABLE(p) (0x00000008 << ((p)<<3)) +#define KL4_PORT_RESUME_WAKE_EN(p) (0x00000004 << ((p)<<3)) +#define KL4_PORT_CONNECT_WAKE_EN(p) (0x00000002 << ((p)<<3)) +#define KL4_PORT_DISCONNECT_WAKE_EN(p) (0x00000001 << ((p)<<3)) +#define KL4_PORT_RESUME_STAT(p) (0x00000040 << ((p)<<3)) +#define KL4_PORT_CONNECT_STAT(p) (0x00000020 << ((p)<<3)) +#define KL4_PORT_DISCONNECT_STAT(p) (0x00000010 << ((p)<<3)) + +/* Pangea and Intrepid only */ +#define KL5_VIA_USE_CLK31 0000000001 /* Pangea Only */ +#define KL5_SCC_USE_CLK31 0x00000002 /* Pangea Only */ +#define KL5_PWM_CLK32_EN 0x00000004 +#define KL5_CLK3_68_EN 0x00000010 +#define KL5_CLK32_EN 0x00000020 + + +/* K2 definitions */ +#define K2_FCR0_USB0_SWRESET 0x00200000 +#define K2_FCR0_USB1_SWRESET 0x02000000 +#define K2_FCR0_RING_PME_DISABLE 0x08000000 + +#define K2_FCR1_PCI1_BUS_RESET_N 0x00000010 +#define K2_FCR1_PCI1_SLEEP_RESET_EN 0x00000020 +#define K2_FCR1_I2S0_CELL_ENABLE 0x00000400 +#define K2_FCR1_I2S0_RESET 0x00000800 +#define K2_FCR1_I2S0_CLK_ENABLE_BIT 0x00001000 +#define K2_FCR1_I2S0_ENABLE 0x00002000 +#define K2_FCR1_PCI1_CLK_ENABLE 0x00004000 +#define K2_FCR1_FW_CLK_ENABLE 0x00008000 +#define K2_FCR1_FW_RESET_N 0x00010000 +#define K2_FCR1_I2S1_CELL_ENABLE 0x00020000 +#define K2_FCR1_I2S1_CLK_ENABLE_BIT 0x00080000 +#define K2_FCR1_I2S1_ENABLE 0x00100000 +#define K2_FCR1_GMAC_CLK_ENABLE 0x00400000 +#define K2_FCR1_GMAC_POWER_DOWN 0x00800000 +#define K2_FCR1_GMAC_RESET_N 0x01000000 +#define K2_FCR1_SATA_CLK_ENABLE 0x02000000 +#define K2_FCR1_SATA_POWER_DOWN 0x04000000 +#define K2_FCR1_SATA_RESET_N 0x08000000 +#define K2_FCR1_UATA_CLK_ENABLE 0x10000000 +#define K2_FCR1_UATA_RESET_N 0x40000000 +#define K2_FCR1_UATA_CHOOSE_CLK66 0x80000000 + +/* Shasta definitions */ +#define SH_FCR1_I2S2_CELL_ENABLE 0x00000010 +#define SH_FCR1_I2S2_CLK_ENABLE_BIT 0x00000040 +#define SH_FCR1_I2S2_ENABLE 0x00000080 +#define SH_FCR3_I2S2_CLK18_ENABLE 0x00008000 + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_KEYLARGO_H */ diff --git a/arch/powerpc/include/asm/kgdb.h b/arch/powerpc/include/asm/kgdb.h new file mode 100644 index 00000000000..edd217006d2 --- /dev/null +++ b/arch/powerpc/include/asm/kgdb.h @@ -0,0 +1,63 @@ +/* + * The PowerPC (32/64) specific defines / externs for KGDB. Based on + * the previous 32bit and 64bit specific files, which had the following + * copyrights: + * + * PPC64 Mods (C) 2005 Frank Rowand (frowand@mvista.com) + * PPC Mods (C) 2004 Tom Rini (trini@mvista.com) + * PPC Mods (C) 2003 John Whitney (john.whitney@timesys.com) + * PPC Mods (C) 1998 Michael Tesch (tesch@cs.wisc.edu) + * + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + * Author: Tom Rini + * + * 2006 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifdef __KERNEL__ +#ifndef __POWERPC_KGDB_H__ +#define __POWERPC_KGDB_H__ + +#ifndef __ASSEMBLY__ + +#define BREAK_INSTR_SIZE 4 +#define BUFMAX ((NUMREGBYTES * 2) + 512) +#define OUTBUFMAX ((NUMREGBYTES * 2) + 512) +static inline void arch_kgdb_breakpoint(void) +{ + asm(".long 0x7d821008"); /* twge r2, r2 */ +} +#define CACHE_FLUSH_IS_SAFE 1 + +/* The number bytes of registers we have to save depends on a few + * things. For 64bit we default to not including vector registers and + * vector state registers. */ +#ifdef CONFIG_PPC64 +/* + * 64 bit (8 byte) registers: + * 32 gpr, 32 fpr, nip, msr, link, ctr + * 32 bit (4 byte) registers: + * ccr, xer, fpscr + */ +#define NUMREGBYTES ((68 * 8) + (3 * 4)) +#define NUMCRITREGBYTES 184 +#else /* CONFIG_PPC32 */ +/* On non-E500 family PPC32 we determine the size by picking the last + * register we need, but on E500 we skip sections so we list what we + * need to store, and add it up. */ +#ifndef CONFIG_E500 +#define MAXREG (PT_FPSCR+1) +#else +/* 32 GPRs (8 bytes), nip, msr, ccr, link, ctr, xer, acc (8 bytes), spefscr*/ +#define MAXREG ((32*2)+6+2+1) +#endif +#define NUMREGBYTES (MAXREG * sizeof(int)) +/* CR/LR, R1, R2, R13-R31 inclusive. */ +#define NUMCRITREGBYTES (23 * sizeof(int)) +#endif /* 32/64 */ +#endif /* !(__ASSEMBLY__) */ +#endif /* !__POWERPC_KGDB_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/kmap_types.h b/arch/powerpc/include/asm/kmap_types.h new file mode 100644 index 00000000000..b6bac6f61c1 --- /dev/null +++ b/arch/powerpc/include/asm/kmap_types.h @@ -0,0 +1,33 @@ +#ifndef _ASM_POWERPC_KMAP_TYPES_H +#define _ASM_POWERPC_KMAP_TYPES_H + +#ifdef __KERNEL__ + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +enum km_type { + KM_BOUNCE_READ, + KM_SKB_SUNRPC_DATA, + KM_SKB_DATA_SOFTIRQ, + KM_USER0, + KM_USER1, + KM_BIO_SRC_IRQ, + KM_BIO_DST_IRQ, + KM_PTE0, + KM_PTE1, + KM_IRQ0, + KM_IRQ1, + KM_SOFTIRQ0, + KM_SOFTIRQ1, + KM_PPC_SYNC_PAGE, + KM_PPC_SYNC_ICACHE, + KM_TYPE_NR +}; + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_KMAP_TYPES_H */ diff --git a/arch/powerpc/include/asm/kprobes.h b/arch/powerpc/include/asm/kprobes.h new file mode 100644 index 00000000000..d0e7701fa1f --- /dev/null +++ b/arch/powerpc/include/asm/kprobes.h @@ -0,0 +1,118 @@ +#ifndef _ASM_POWERPC_KPROBES_H +#define _ASM_POWERPC_KPROBES_H +#ifdef __KERNEL__ +/* + * Kernel Probes (KProbes) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) IBM Corporation, 2002, 2004 + * + * 2002-Oct Created by Vamsi Krishna S Kernel + * Probes initial implementation ( includes suggestions from + * Rusty Russell). + * 2004-Nov Modified for PPC64 by Ananth N Mavinakayanahalli + * + */ +#include +#include +#include + +#define __ARCH_WANT_KPROBES_INSN_SLOT + +struct pt_regs; +struct kprobe; + +typedef unsigned int kprobe_opcode_t; +#define BREAKPOINT_INSTRUCTION 0x7fe00008 /* trap */ +#define MAX_INSN_SIZE 1 + +#define IS_TW(instr) (((instr) & 0xfc0007fe) == 0x7c000008) +#define IS_TD(instr) (((instr) & 0xfc0007fe) == 0x7c000088) +#define IS_TDI(instr) (((instr) & 0xfc000000) == 0x08000000) +#define IS_TWI(instr) (((instr) & 0xfc000000) == 0x0c000000) + +#ifdef CONFIG_PPC64 +/* + * 64bit powerpc uses function descriptors. + * Handle cases where: + * - User passes a <.symbol> or + * - User passes a or + * - User passes a non-existant symbol, kallsyms_lookup_name + * returns 0. Don't deref the NULL pointer in that case + */ +#define kprobe_lookup_name(name, addr) \ +{ \ + addr = (kprobe_opcode_t *)kallsyms_lookup_name(name); \ + if (addr) { \ + char *colon; \ + if ((colon = strchr(name, ':')) != NULL) { \ + colon++; \ + if (*colon != '\0' && *colon != '.') \ + addr = *(kprobe_opcode_t **)addr; \ + } else if (name[0] != '.') \ + addr = *(kprobe_opcode_t **)addr; \ + } else { \ + char dot_name[KSYM_NAME_LEN]; \ + dot_name[0] = '.'; \ + dot_name[1] = '\0'; \ + strncat(dot_name, name, KSYM_NAME_LEN - 2); \ + addr = (kprobe_opcode_t *)kallsyms_lookup_name(dot_name); \ + } \ +} + +#define is_trap(instr) (IS_TW(instr) || IS_TD(instr) || \ + IS_TWI(instr) || IS_TDI(instr)) +#else +/* Use stock kprobe_lookup_name since ppc32 doesn't use function descriptors */ +#define is_trap(instr) (IS_TW(instr) || IS_TWI(instr)) +#endif + +#define flush_insn_slot(p) do { } while (0) +#define kretprobe_blacklist_size 0 + +void kretprobe_trampoline(void); +extern void arch_remove_kprobe(struct kprobe *p); + +/* Architecture specific copy of original instruction */ +struct arch_specific_insn { + /* copy of original instruction */ + kprobe_opcode_t *insn; + /* + * Set in kprobes code, initially to 0. If the instruction can be + * eumulated, this is set to 1, if not, to -1. + */ + int boostable; +}; + +struct prev_kprobe { + struct kprobe *kp; + unsigned long status; + unsigned long saved_msr; +}; + +/* per-cpu kprobe control block */ +struct kprobe_ctlblk { + unsigned long kprobe_status; + unsigned long kprobe_saved_msr; + struct pt_regs jprobe_saved_regs; + struct prev_kprobe prev_kprobe; +}; + +extern int kprobe_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data); +extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr); +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_KPROBES_H */ diff --git a/arch/powerpc/include/asm/kvm.h b/arch/powerpc/include/asm/kvm.h new file mode 100644 index 00000000000..f993e4198d5 --- /dev/null +++ b/arch/powerpc/include/asm/kvm.h @@ -0,0 +1,55 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Copyright IBM Corp. 2007 + * + * Authors: Hollis Blanchard + */ + +#ifndef __LINUX_KVM_POWERPC_H +#define __LINUX_KVM_POWERPC_H + +#include + +struct kvm_regs { + __u64 pc; + __u64 cr; + __u64 ctr; + __u64 lr; + __u64 xer; + __u64 msr; + __u64 srr0; + __u64 srr1; + __u64 pid; + + __u64 sprg0; + __u64 sprg1; + __u64 sprg2; + __u64 sprg3; + __u64 sprg4; + __u64 sprg5; + __u64 sprg6; + __u64 sprg7; + + __u64 gpr[32]; +}; + +struct kvm_sregs { +}; + +struct kvm_fpu { + __u64 fpr[32]; +}; + +#endif /* __LINUX_KVM_POWERPC_H */ diff --git a/arch/powerpc/include/asm/kvm_asm.h b/arch/powerpc/include/asm/kvm_asm.h new file mode 100644 index 00000000000..2197764796d --- /dev/null +++ b/arch/powerpc/include/asm/kvm_asm.h @@ -0,0 +1,55 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Copyright IBM Corp. 2008 + * + * Authors: Hollis Blanchard + */ + +#ifndef __POWERPC_KVM_ASM_H__ +#define __POWERPC_KVM_ASM_H__ + +/* IVPR must be 64KiB-aligned. */ +#define VCPU_SIZE_ORDER 4 +#define VCPU_SIZE_LOG (VCPU_SIZE_ORDER + 12) +#define VCPU_TLB_PGSZ PPC44x_TLB_64K +#define VCPU_SIZE_BYTES (1< + */ + +#ifndef __POWERPC_KVM_HOST_H__ +#define __POWERPC_KVM_HOST_H__ + +#include +#include +#include +#include +#include + +#define KVM_MAX_VCPUS 1 +#define KVM_MEMORY_SLOTS 32 +/* memory slots that does not exposed to userspace */ +#define KVM_PRIVATE_MEM_SLOTS 4 + +#define KVM_COALESCED_MMIO_PAGE_OFFSET 1 + +/* We don't currently support large pages. */ +#define KVM_PAGES_PER_HPAGE (1<<31) + +struct kvm; +struct kvm_run; +struct kvm_vcpu; + +struct kvm_vm_stat { + u32 remote_tlb_flush; +}; + +struct kvm_vcpu_stat { + u32 sum_exits; + u32 mmio_exits; + u32 dcr_exits; + u32 signal_exits; + u32 light_exits; + /* Account for special types of light exits: */ + u32 itlb_real_miss_exits; + u32 itlb_virt_miss_exits; + u32 dtlb_real_miss_exits; + u32 dtlb_virt_miss_exits; + u32 syscall_exits; + u32 isi_exits; + u32 dsi_exits; + u32 emulated_inst_exits; + u32 dec_exits; + u32 ext_intr_exits; + u32 halt_wakeup; +}; + +struct tlbe { + u32 tid; /* Only the low 8 bits are used. */ + u32 word0; + u32 word1; + u32 word2; +}; + +struct kvm_arch { +}; + +struct kvm_vcpu_arch { + /* Unmodified copy of the guest's TLB. */ + struct tlbe guest_tlb[PPC44x_TLB_SIZE]; + /* TLB that's actually used when the guest is running. */ + struct tlbe shadow_tlb[PPC44x_TLB_SIZE]; + /* Pages which are referenced in the shadow TLB. */ + struct page *shadow_pages[PPC44x_TLB_SIZE]; + /* Copy of the host's TLB. */ + struct tlbe host_tlb[PPC44x_TLB_SIZE]; + + u32 host_stack; + u32 host_pid; + + u64 fpr[32]; + u32 gpr[32]; + + u32 pc; + u32 cr; + u32 ctr; + u32 lr; + u32 xer; + + u32 msr; + u32 mmucr; + u32 sprg0; + u32 sprg1; + u32 sprg2; + u32 sprg3; + u32 sprg4; + u32 sprg5; + u32 sprg6; + u32 sprg7; + u32 srr0; + u32 srr1; + u32 csrr0; + u32 csrr1; + u32 dsrr0; + u32 dsrr1; + u32 dear; + u32 esr; + u32 dec; + u32 decar; + u32 tbl; + u32 tbu; + u32 tcr; + u32 tsr; + u32 ivor[16]; + u32 ivpr; + u32 pir; + u32 pid; + u32 pvr; + u32 ccr0; + u32 ccr1; + u32 dbcr0; + u32 dbcr1; + + u32 last_inst; + u32 fault_dear; + u32 fault_esr; + gpa_t paddr_accessed; + + u8 io_gpr; /* GPR used as IO source/target */ + u8 mmio_is_bigendian; + u8 dcr_needed; + u8 dcr_is_write; + + u32 cpr0_cfgaddr; /* holds the last set cpr0_cfgaddr */ + + struct timer_list dec_timer; + unsigned long pending_exceptions; +}; + +struct kvm_guest_debug { + int enabled; + unsigned long bp[4]; + int singlestep; +}; + +#endif /* __POWERPC_KVM_HOST_H__ */ diff --git a/arch/powerpc/include/asm/kvm_para.h b/arch/powerpc/include/asm/kvm_para.h new file mode 100644 index 00000000000..2d48f6a63d0 --- /dev/null +++ b/arch/powerpc/include/asm/kvm_para.h @@ -0,0 +1,37 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Copyright IBM Corp. 2008 + * + * Authors: Hollis Blanchard + */ + +#ifndef __POWERPC_KVM_PARA_H__ +#define __POWERPC_KVM_PARA_H__ + +#ifdef __KERNEL__ + +static inline int kvm_para_available(void) +{ + return 0; +} + +static inline unsigned int kvm_arch_para_features(void) +{ + return 0; +} + +#endif /* __KERNEL__ */ + +#endif /* __POWERPC_KVM_PARA_H__ */ diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h new file mode 100644 index 00000000000..a8b06879226 --- /dev/null +++ b/arch/powerpc/include/asm/kvm_ppc.h @@ -0,0 +1,95 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Copyright IBM Corp. 2008 + * + * Authors: Hollis Blanchard + */ + +#ifndef __POWERPC_KVM_PPC_H__ +#define __POWERPC_KVM_PPC_H__ + +/* This file exists just so we can dereference kvm_vcpu, avoiding nested header + * dependencies. */ + +#include +#include +#include +#include +#include + +struct kvm_tlb { + struct tlbe guest_tlb[PPC44x_TLB_SIZE]; + struct tlbe shadow_tlb[PPC44x_TLB_SIZE]; +}; + +enum emulation_result { + EMULATE_DONE, /* no further processing */ + EMULATE_DO_MMIO, /* kvm_run filled with MMIO request */ + EMULATE_DO_DCR, /* kvm_run filled with DCR request */ + EMULATE_FAIL, /* can't emulate this instruction */ +}; + +extern const unsigned char exception_priority[]; +extern const unsigned char priority_exception[]; + +extern int __kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu); +extern char kvmppc_handlers_start[]; +extern unsigned long kvmppc_handler_len; + +extern void kvmppc_dump_vcpu(struct kvm_vcpu *vcpu); +extern int kvmppc_handle_load(struct kvm_run *run, struct kvm_vcpu *vcpu, + unsigned int rt, unsigned int bytes, + int is_bigendian); +extern int kvmppc_handle_store(struct kvm_run *run, struct kvm_vcpu *vcpu, + u32 val, unsigned int bytes, int is_bigendian); + +extern int kvmppc_emulate_instruction(struct kvm_run *run, + struct kvm_vcpu *vcpu); +extern int kvmppc_emulate_mmio(struct kvm_run *run, struct kvm_vcpu *vcpu); + +extern void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gfn_t gfn, + u64 asid, u32 flags); +extern void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, gva_t eaddr, + gva_t eend, u32 asid); +extern void kvmppc_mmu_priv_switch(struct kvm_vcpu *vcpu, int usermode); + +extern void kvmppc_check_and_deliver_interrupts(struct kvm_vcpu *vcpu); + +static inline void kvmppc_queue_exception(struct kvm_vcpu *vcpu, int exception) +{ + unsigned int priority = exception_priority[exception]; + set_bit(priority, &vcpu->arch.pending_exceptions); +} + +static inline void kvmppc_clear_exception(struct kvm_vcpu *vcpu, int exception) +{ + unsigned int priority = exception_priority[exception]; + clear_bit(priority, &vcpu->arch.pending_exceptions); +} + +/* Helper function for "full" MSR writes. No need to call this if only EE is + * changing. */ +static inline void kvmppc_set_msr(struct kvm_vcpu *vcpu, u32 new_msr) +{ + if ((new_msr & MSR_PR) != (vcpu->arch.msr & MSR_PR)) + kvmppc_mmu_priv_switch(vcpu, new_msr & MSR_PR); + + vcpu->arch.msr = new_msr; + + if (vcpu->arch.msr & MSR_WE) + kvm_vcpu_block(vcpu); +} + +#endif /* __POWERPC_KVM_PPC_H__ */ diff --git a/arch/powerpc/include/asm/libata-portmap.h b/arch/powerpc/include/asm/libata-portmap.h new file mode 100644 index 00000000000..4d8518049f4 --- /dev/null +++ b/arch/powerpc/include/asm/libata-portmap.h @@ -0,0 +1,12 @@ +#ifndef __ASM_POWERPC_LIBATA_PORTMAP_H +#define __ASM_POWERPC_LIBATA_PORTMAP_H + +#define ATA_PRIMARY_CMD 0x1F0 +#define ATA_PRIMARY_CTL 0x3F6 +#define ATA_PRIMARY_IRQ(dev) pci_get_legacy_ide_irq(dev, 0) + +#define ATA_SECONDARY_CMD 0x170 +#define ATA_SECONDARY_CTL 0x376 +#define ATA_SECONDARY_IRQ(dev) pci_get_legacy_ide_irq(dev, 1) + +#endif diff --git a/arch/powerpc/include/asm/linkage.h b/arch/powerpc/include/asm/linkage.h new file mode 100644 index 00000000000..e1c4ac1cc4b --- /dev/null +++ b/arch/powerpc/include/asm/linkage.h @@ -0,0 +1,6 @@ +#ifndef _ASM_POWERPC_LINKAGE_H +#define _ASM_POWERPC_LINKAGE_H + +/* Nothing to see here... */ + +#endif /* _ASM_POWERPC_LINKAGE_H */ diff --git a/arch/powerpc/include/asm/lmb.h b/arch/powerpc/include/asm/lmb.h new file mode 100644 index 00000000000..6f5fdf0a19a --- /dev/null +++ b/arch/powerpc/include/asm/lmb.h @@ -0,0 +1,15 @@ +#ifndef _ASM_POWERPC_LMB_H +#define _ASM_POWERPC_LMB_H + +#include + +#define LMB_DBG(fmt...) udbg_printf(fmt) + +#ifdef CONFIG_PPC32 +extern phys_addr_t lowmem_end_addr; +#define LMB_REAL_LIMIT lowmem_end_addr +#else +#define LMB_REAL_LIMIT 0 +#endif + +#endif /* _ASM_POWERPC_LMB_H */ diff --git a/arch/powerpc/include/asm/local.h b/arch/powerpc/include/asm/local.h new file mode 100644 index 00000000000..612d8327665 --- /dev/null +++ b/arch/powerpc/include/asm/local.h @@ -0,0 +1,200 @@ +#ifndef _ARCH_POWERPC_LOCAL_H +#define _ARCH_POWERPC_LOCAL_H + +#include +#include + +typedef struct +{ + atomic_long_t a; +} local_t; + +#define LOCAL_INIT(i) { ATOMIC_LONG_INIT(i) } + +#define local_read(l) atomic_long_read(&(l)->a) +#define local_set(l,i) atomic_long_set(&(l)->a, (i)) + +#define local_add(i,l) atomic_long_add((i),(&(l)->a)) +#define local_sub(i,l) atomic_long_sub((i),(&(l)->a)) +#define local_inc(l) atomic_long_inc(&(l)->a) +#define local_dec(l) atomic_long_dec(&(l)->a) + +static __inline__ long local_add_return(long a, local_t *l) +{ + long t; + + __asm__ __volatile__( +"1:" PPC_LLARX "%0,0,%2 # local_add_return\n\ + add %0,%1,%0\n" + PPC405_ERR77(0,%2) + PPC_STLCX "%0,0,%2 \n\ + bne- 1b" + : "=&r" (t) + : "r" (a), "r" (&(l->a.counter)) + : "cc", "memory"); + + return t; +} + +#define local_add_negative(a, l) (local_add_return((a), (l)) < 0) + +static __inline__ long local_sub_return(long a, local_t *l) +{ + long t; + + __asm__ __volatile__( +"1:" PPC_LLARX "%0,0,%2 # local_sub_return\n\ + subf %0,%1,%0\n" + PPC405_ERR77(0,%2) + PPC_STLCX "%0,0,%2 \n\ + bne- 1b" + : "=&r" (t) + : "r" (a), "r" (&(l->a.counter)) + : "cc", "memory"); + + return t; +} + +static __inline__ long local_inc_return(local_t *l) +{ + long t; + + __asm__ __volatile__( +"1:" PPC_LLARX "%0,0,%1 # local_inc_return\n\ + addic %0,%0,1\n" + PPC405_ERR77(0,%1) + PPC_STLCX "%0,0,%1 \n\ + bne- 1b" + : "=&r" (t) + : "r" (&(l->a.counter)) + : "cc", "memory"); + + return t; +} + +/* + * local_inc_and_test - increment and test + * @l: pointer of type local_t + * + * Atomically increments @l by 1 + * and returns true if the result is zero, or false for all + * other cases. + */ +#define local_inc_and_test(l) (local_inc_return(l) == 0) + +static __inline__ long local_dec_return(local_t *l) +{ + long t; + + __asm__ __volatile__( +"1:" PPC_LLARX "%0,0,%1 # local_dec_return\n\ + addic %0,%0,-1\n" + PPC405_ERR77(0,%1) + PPC_STLCX "%0,0,%1\n\ + bne- 1b" + : "=&r" (t) + : "r" (&(l->a.counter)) + : "cc", "memory"); + + return t; +} + +#define local_cmpxchg(l, o, n) \ + (cmpxchg_local(&((l)->a.counter), (o), (n))) +#define local_xchg(l, n) (xchg_local(&((l)->a.counter), (n))) + +/** + * local_add_unless - add unless the number is a given value + * @l: pointer of type local_t + * @a: the amount to add to v... + * @u: ...unless v is equal to u. + * + * Atomically adds @a to @l, so long as it was not @u. + * Returns non-zero if @l was not @u, and zero otherwise. + */ +static __inline__ int local_add_unless(local_t *l, long a, long u) +{ + long t; + + __asm__ __volatile__ ( +"1:" PPC_LLARX "%0,0,%1 # local_add_unless\n\ + cmpw 0,%0,%3 \n\ + beq- 2f \n\ + add %0,%2,%0 \n" + PPC405_ERR77(0,%2) + PPC_STLCX "%0,0,%1 \n\ + bne- 1b \n" +" subf %0,%2,%0 \n\ +2:" + : "=&r" (t) + : "r" (&(l->a.counter)), "r" (a), "r" (u) + : "cc", "memory"); + + return t != u; +} + +#define local_inc_not_zero(l) local_add_unless((l), 1, 0) + +#define local_sub_and_test(a, l) (local_sub_return((a), (l)) == 0) +#define local_dec_and_test(l) (local_dec_return((l)) == 0) + +/* + * Atomically test *l and decrement if it is greater than 0. + * The function returns the old value of *l minus 1. + */ +static __inline__ long local_dec_if_positive(local_t *l) +{ + long t; + + __asm__ __volatile__( +"1:" PPC_LLARX "%0,0,%1 # local_dec_if_positive\n\ + cmpwi %0,1\n\ + addi %0,%0,-1\n\ + blt- 2f\n" + PPC405_ERR77(0,%1) + PPC_STLCX "%0,0,%1\n\ + bne- 1b" + "\n\ +2:" : "=&b" (t) + : "r" (&(l->a.counter)) + : "cc", "memory"); + + return t; +} + +/* Use these for per-cpu local_t variables: on some archs they are + * much more efficient than these naive implementations. Note they take + * a variable, not an address. + */ + +#define __local_inc(l) ((l)->a.counter++) +#define __local_dec(l) ((l)->a.counter++) +#define __local_add(i,l) ((l)->a.counter+=(i)) +#define __local_sub(i,l) ((l)->a.counter-=(i)) + +/* Need to disable preemption for the cpu local counters otherwise we could + still access a variable of a previous CPU in a non atomic way. */ +#define cpu_local_wrap_v(l) \ + ({ local_t res__; \ + preempt_disable(); \ + res__ = (l); \ + preempt_enable(); \ + res__; }) +#define cpu_local_wrap(l) \ + ({ preempt_disable(); \ + l; \ + preempt_enable(); }) \ + +#define cpu_local_read(l) cpu_local_wrap_v(local_read(&__get_cpu_var(l))) +#define cpu_local_set(l, i) cpu_local_wrap(local_set(&__get_cpu_var(l), (i))) +#define cpu_local_inc(l) cpu_local_wrap(local_inc(&__get_cpu_var(l))) +#define cpu_local_dec(l) cpu_local_wrap(local_dec(&__get_cpu_var(l))) +#define cpu_local_add(i, l) cpu_local_wrap(local_add((i), &__get_cpu_var(l))) +#define cpu_local_sub(i, l) cpu_local_wrap(local_sub((i), &__get_cpu_var(l))) + +#define __cpu_local_inc(l) cpu_local_inc(l) +#define __cpu_local_dec(l) cpu_local_dec(l) +#define __cpu_local_add(i, l) cpu_local_add((i), (l)) +#define __cpu_local_sub(i, l) cpu_local_sub((i), (l)) + +#endif /* _ARCH_POWERPC_LOCAL_H */ diff --git a/arch/powerpc/include/asm/lppaca.h b/arch/powerpc/include/asm/lppaca.h new file mode 100644 index 00000000000..2fe268b1033 --- /dev/null +++ b/arch/powerpc/include/asm/lppaca.h @@ -0,0 +1,159 @@ +/* + * lppaca.h + * Copyright (C) 2001 Mike Corrigan IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _ASM_POWERPC_LPPACA_H +#define _ASM_POWERPC_LPPACA_H +#ifdef __KERNEL__ + +//============================================================================= +// +// This control block contains the data that is shared between the +// hypervisor (PLIC) and the OS. +// +// +//---------------------------------------------------------------------------- +#include +#include +#include + +/* The Hypervisor barfs if the lppaca crosses a page boundary. A 1k + * alignment is sufficient to prevent this */ +struct lppaca { +//============================================================================= +// CACHE_LINE_1 0x0000 - 0x007F Contains read-only data +// NOTE: The xDynXyz fields are fields that will be dynamically changed by +// PLIC when preparing to bring a processor online or when dispatching a +// virtual processor! +//============================================================================= + u32 desc; // Eye catcher 0xD397D781 x00-x03 + u16 size; // Size of this struct x04-x05 + u16 reserved1; // Reserved x06-x07 + u16 reserved2:14; // Reserved x08-x09 + u8 shared_proc:1; // Shared processor indicator ... + u8 secondary_thread:1; // Secondary thread indicator ... + volatile u8 dyn_proc_status:8; // Dynamic Status of this proc x0A-x0A + u8 secondary_thread_count; // Secondary thread count x0B-x0B + volatile u16 dyn_hv_phys_proc_index;// Dynamic HV Physical Proc Index0C-x0D + volatile u16 dyn_hv_log_proc_index;// Dynamic HV Logical Proc Indexx0E-x0F + u32 decr_val; // Value for Decr programming x10-x13 + u32 pmc_val; // Value for PMC regs x14-x17 + volatile u32 dyn_hw_node_id; // Dynamic Hardware Node id x18-x1B + volatile u32 dyn_hw_proc_id; // Dynamic Hardware Proc Id x1C-x1F + volatile u32 dyn_pir; // Dynamic ProcIdReg value x20-x23 + u32 dsei_data; // DSEI data x24-x27 + u64 sprg3; // SPRG3 value x28-x2F + u8 reserved3[80]; // Reserved x30-x7F + +//============================================================================= +// CACHE_LINE_2 0x0080 - 0x00FF Contains local read-write data +//============================================================================= + // This Dword contains a byte for each type of interrupt that can occur. + // The IPI is a count while the others are just a binary 1 or 0. + union { + u64 any_int; + struct { + u16 reserved; // Reserved - cleared by #mpasmbl + u8 xirr_int; // Indicates xXirrValue is valid or Immed IO + u8 ipi_cnt; // IPI Count + u8 decr_int; // DECR interrupt occurred + u8 pdc_int; // PDC interrupt occurred + u8 quantum_int; // Interrupt quantum reached + u8 old_plic_deferred_ext_int; // Old PLIC has a deferred XIRR pending + } fields; + } int_dword; + + // Whenever any fields in this Dword are set then PLIC will defer the + // processing of external interrupts. Note that PLIC will store the + // XIRR directly into the xXirrValue field so that another XIRR will + // not be presented until this one clears. The layout of the low + // 4-bytes of this Dword is upto SLIC - PLIC just checks whether the + // entire Dword is zero or not. A non-zero value in the low order + // 2-bytes will result in SLIC being granted the highest thread + // priority upon return. A 0 will return to SLIC as medium priority. + u64 plic_defer_ints_area; // Entire Dword + + // Used to pass the real SRR0/1 from PLIC to SLIC as well as to + // pass the target SRR0/1 from SLIC to PLIC on a SetAsrAndRfid. + u64 saved_srr0; // Saved SRR0 x10-x17 + u64 saved_srr1; // Saved SRR1 x18-x1F + + // Used to pass parms from the OS to PLIC for SetAsrAndRfid + u64 saved_gpr3; // Saved GPR3 x20-x27 + u64 saved_gpr4; // Saved GPR4 x28-x2F + u64 saved_gpr5; // Saved GPR5 x30-x37 + + u8 reserved4; // Reserved x38-x38 + u8 donate_dedicated_cpu; // Donate dedicated CPU cycles x39-x39 + u8 fpregs_in_use; // FP regs in use x3A-x3A + u8 pmcregs_in_use; // PMC regs in use x3B-x3B + volatile u32 saved_decr; // Saved Decr Value x3C-x3F + volatile u64 emulated_time_base;// Emulated TB for this thread x40-x47 + volatile u64 cur_plic_latency; // Unaccounted PLIC latency x48-x4F + u64 tot_plic_latency; // Accumulated PLIC latency x50-x57 + u64 wait_state_cycles; // Wait cycles for this proc x58-x5F + u64 end_of_quantum; // TB at end of quantum x60-x67 + u64 pdc_saved_sprg1; // Saved SPRG1 for PMC int x68-x6F + u64 pdc_saved_srr0; // Saved SRR0 for PMC int x70-x77 + volatile u32 virtual_decr; // Virtual DECR for shared procsx78-x7B + u16 slb_count; // # of SLBs to maintain x7C-x7D + u8 idle; // Indicate OS is idle x7E + u8 vmxregs_in_use; // VMX registers in use x7F + + +//============================================================================= +// CACHE_LINE_3 0x0100 - 0x017F: This line is shared with other processors +//============================================================================= + // This is the yield_count. An "odd" value (low bit on) means that + // the processor is yielded (either because of an OS yield or a PLIC + // preempt). An even value implies that the processor is currently + // executing. + // NOTE: This value will ALWAYS be zero for dedicated processors and + // will NEVER be zero for shared processors (ie, initialized to a 1). + volatile u32 yield_count; // PLIC increments each dispatchx00-x03 + u32 reserved6; + volatile u64 cmo_faults; // CMO page fault count x08-x0F + volatile u64 cmo_fault_time; // CMO page fault time x10-x17 + u8 reserved7[104]; // Reserved x18-x7F + +//============================================================================= +// CACHE_LINE_4-5 0x0180 - 0x027F Contains PMC interrupt data +//============================================================================= + u8 pmc_save_area[256]; // PMC interrupt Area x00-xFF +} __attribute__((__aligned__(0x400))); + +extern struct lppaca lppaca[]; + +/* + * SLB shadow buffer structure as defined in the PAPR. The save_area + * contains adjacent ESID and VSID pairs for each shadowed SLB. The + * ESID is stored in the lower 64bits, then the VSID. + */ +struct slb_shadow { + u32 persistent; // Number of persistent SLBs x00-x03 + u32 buffer_length; // Total shadow buffer length x04-x07 + u64 reserved; // Alignment x08-x0f + struct { + u64 esid; + u64 vsid; + } save_area[SLB_NUM_BOLTED]; // x10-x40 +} ____cacheline_aligned; + +extern struct slb_shadow slb_shadow[]; + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_LPPACA_H */ diff --git a/arch/powerpc/include/asm/lv1call.h b/arch/powerpc/include/asm/lv1call.h new file mode 100644 index 00000000000..81713acf752 --- /dev/null +++ b/arch/powerpc/include/asm/lv1call.h @@ -0,0 +1,348 @@ +/* + * PS3 hvcall interface. + * + * Copyright (C) 2006 Sony Computer Entertainment Inc. + * Copyright 2006 Sony Corp. + * Copyright 2003, 2004 (c) MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#if !defined(_ASM_POWERPC_LV1CALL_H) +#define _ASM_POWERPC_LV1CALL_H + +#if !defined(__ASSEMBLY__) + +#include + +/* lv1 call declaration macros */ + +#define LV1_1_IN_ARG_DECL u64 in_1 +#define LV1_2_IN_ARG_DECL LV1_1_IN_ARG_DECL, u64 in_2 +#define LV1_3_IN_ARG_DECL LV1_2_IN_ARG_DECL, u64 in_3 +#define LV1_4_IN_ARG_DECL LV1_3_IN_ARG_DECL, u64 in_4 +#define LV1_5_IN_ARG_DECL LV1_4_IN_ARG_DECL, u64 in_5 +#define LV1_6_IN_ARG_DECL LV1_5_IN_ARG_DECL, u64 in_6 +#define LV1_7_IN_ARG_DECL LV1_6_IN_ARG_DECL, u64 in_7 +#define LV1_8_IN_ARG_DECL LV1_7_IN_ARG_DECL, u64 in_8 +#define LV1_1_OUT_ARG_DECL u64 *out_1 +#define LV1_2_OUT_ARG_DECL LV1_1_OUT_ARG_DECL, u64 *out_2 +#define LV1_3_OUT_ARG_DECL LV1_2_OUT_ARG_DECL, u64 *out_3 +#define LV1_4_OUT_ARG_DECL LV1_3_OUT_ARG_DECL, u64 *out_4 +#define LV1_5_OUT_ARG_DECL LV1_4_OUT_ARG_DECL, u64 *out_5 +#define LV1_6_OUT_ARG_DECL LV1_5_OUT_ARG_DECL, u64 *out_6 +#define LV1_7_OUT_ARG_DECL LV1_6_OUT_ARG_DECL, u64 *out_7 + +#define LV1_0_IN_0_OUT_ARG_DECL void +#define LV1_1_IN_0_OUT_ARG_DECL LV1_1_IN_ARG_DECL +#define LV1_2_IN_0_OUT_ARG_DECL LV1_2_IN_ARG_DECL +#define LV1_3_IN_0_OUT_ARG_DECL LV1_3_IN_ARG_DECL +#define LV1_4_IN_0_OUT_ARG_DECL LV1_4_IN_ARG_DECL +#define LV1_5_IN_0_OUT_ARG_DECL LV1_5_IN_ARG_DECL +#define LV1_6_IN_0_OUT_ARG_DECL LV1_6_IN_ARG_DECL +#define LV1_7_IN_0_OUT_ARG_DECL LV1_7_IN_ARG_DECL + +#define LV1_0_IN_1_OUT_ARG_DECL LV1_1_OUT_ARG_DECL +#define LV1_1_IN_1_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_1_OUT_ARG_DECL +#define LV1_2_IN_1_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_1_OUT_ARG_DECL +#define LV1_3_IN_1_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_1_OUT_ARG_DECL +#define LV1_4_IN_1_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_1_OUT_ARG_DECL +#define LV1_5_IN_1_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_1_OUT_ARG_DECL +#define LV1_6_IN_1_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_1_OUT_ARG_DECL +#define LV1_7_IN_1_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_1_OUT_ARG_DECL +#define LV1_8_IN_1_OUT_ARG_DECL LV1_8_IN_ARG_DECL, LV1_1_OUT_ARG_DECL + +#define LV1_0_IN_2_OUT_ARG_DECL LV1_2_OUT_ARG_DECL +#define LV1_1_IN_2_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_2_OUT_ARG_DECL +#define LV1_2_IN_2_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_2_OUT_ARG_DECL +#define LV1_3_IN_2_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_2_OUT_ARG_DECL +#define LV1_4_IN_2_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_2_OUT_ARG_DECL +#define LV1_5_IN_2_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_2_OUT_ARG_DECL +#define LV1_6_IN_2_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_2_OUT_ARG_DECL +#define LV1_7_IN_2_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_2_OUT_ARG_DECL + +#define LV1_0_IN_3_OUT_ARG_DECL LV1_3_OUT_ARG_DECL +#define LV1_1_IN_3_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_3_OUT_ARG_DECL +#define LV1_2_IN_3_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_3_OUT_ARG_DECL +#define LV1_3_IN_3_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_3_OUT_ARG_DECL +#define LV1_4_IN_3_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_3_OUT_ARG_DECL +#define LV1_5_IN_3_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_3_OUT_ARG_DECL +#define LV1_6_IN_3_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_3_OUT_ARG_DECL +#define LV1_7_IN_3_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_3_OUT_ARG_DECL + +#define LV1_0_IN_4_OUT_ARG_DECL LV1_4_OUT_ARG_DECL +#define LV1_1_IN_4_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_4_OUT_ARG_DECL +#define LV1_2_IN_4_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_4_OUT_ARG_DECL +#define LV1_3_IN_4_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_4_OUT_ARG_DECL +#define LV1_4_IN_4_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_4_OUT_ARG_DECL +#define LV1_5_IN_4_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_4_OUT_ARG_DECL +#define LV1_6_IN_4_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_4_OUT_ARG_DECL +#define LV1_7_IN_4_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_4_OUT_ARG_DECL + +#define LV1_0_IN_5_OUT_ARG_DECL LV1_5_OUT_ARG_DECL +#define LV1_1_IN_5_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_5_OUT_ARG_DECL +#define LV1_2_IN_5_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_5_OUT_ARG_DECL +#define LV1_3_IN_5_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_5_OUT_ARG_DECL +#define LV1_4_IN_5_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_5_OUT_ARG_DECL +#define LV1_5_IN_5_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_5_OUT_ARG_DECL +#define LV1_6_IN_5_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_5_OUT_ARG_DECL +#define LV1_7_IN_5_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_5_OUT_ARG_DECL + +#define LV1_0_IN_6_OUT_ARG_DECL LV1_6_OUT_ARG_DECL +#define LV1_1_IN_6_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_6_OUT_ARG_DECL +#define LV1_2_IN_6_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_6_OUT_ARG_DECL +#define LV1_3_IN_6_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_6_OUT_ARG_DECL +#define LV1_4_IN_6_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_6_OUT_ARG_DECL +#define LV1_5_IN_6_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_6_OUT_ARG_DECL +#define LV1_6_IN_6_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_6_OUT_ARG_DECL +#define LV1_7_IN_6_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_6_OUT_ARG_DECL + +#define LV1_0_IN_7_OUT_ARG_DECL LV1_7_OUT_ARG_DECL +#define LV1_1_IN_7_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_7_OUT_ARG_DECL +#define LV1_2_IN_7_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_7_OUT_ARG_DECL +#define LV1_3_IN_7_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_7_OUT_ARG_DECL +#define LV1_4_IN_7_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_7_OUT_ARG_DECL +#define LV1_5_IN_7_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_7_OUT_ARG_DECL +#define LV1_6_IN_7_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_7_OUT_ARG_DECL +#define LV1_7_IN_7_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_7_OUT_ARG_DECL + +#define LV1_1_IN_ARGS in_1 +#define LV1_2_IN_ARGS LV1_1_IN_ARGS, in_2 +#define LV1_3_IN_ARGS LV1_2_IN_ARGS, in_3 +#define LV1_4_IN_ARGS LV1_3_IN_ARGS, in_4 +#define LV1_5_IN_ARGS LV1_4_IN_ARGS, in_5 +#define LV1_6_IN_ARGS LV1_5_IN_ARGS, in_6 +#define LV1_7_IN_ARGS LV1_6_IN_ARGS, in_7 +#define LV1_8_IN_ARGS LV1_7_IN_ARGS, in_8 + +#define LV1_1_OUT_ARGS out_1 +#define LV1_2_OUT_ARGS LV1_1_OUT_ARGS, out_2 +#define LV1_3_OUT_ARGS LV1_2_OUT_ARGS, out_3 +#define LV1_4_OUT_ARGS LV1_3_OUT_ARGS, out_4 +#define LV1_5_OUT_ARGS LV1_4_OUT_ARGS, out_5 +#define LV1_6_OUT_ARGS LV1_5_OUT_ARGS, out_6 +#define LV1_7_OUT_ARGS LV1_6_OUT_ARGS, out_7 + +#define LV1_0_IN_0_OUT_ARGS +#define LV1_1_IN_0_OUT_ARGS LV1_1_IN_ARGS +#define LV1_2_IN_0_OUT_ARGS LV1_2_IN_ARGS +#define LV1_3_IN_0_OUT_ARGS LV1_3_IN_ARGS +#define LV1_4_IN_0_OUT_ARGS LV1_4_IN_ARGS +#define LV1_5_IN_0_OUT_ARGS LV1_5_IN_ARGS +#define LV1_6_IN_0_OUT_ARGS LV1_6_IN_ARGS +#define LV1_7_IN_0_OUT_ARGS LV1_7_IN_ARGS + +#define LV1_0_IN_1_OUT_ARGS LV1_1_OUT_ARGS +#define LV1_1_IN_1_OUT_ARGS LV1_1_IN_ARGS, LV1_1_OUT_ARGS +#define LV1_2_IN_1_OUT_ARGS LV1_2_IN_ARGS, LV1_1_OUT_ARGS +#define LV1_3_IN_1_OUT_ARGS LV1_3_IN_ARGS, LV1_1_OUT_ARGS +#define LV1_4_IN_1_OUT_ARGS LV1_4_IN_ARGS, LV1_1_OUT_ARGS +#define LV1_5_IN_1_OUT_ARGS LV1_5_IN_ARGS, LV1_1_OUT_ARGS +#define LV1_6_IN_1_OUT_ARGS LV1_6_IN_ARGS, LV1_1_OUT_ARGS +#define LV1_7_IN_1_OUT_ARGS LV1_7_IN_ARGS, LV1_1_OUT_ARGS +#define LV1_8_IN_1_OUT_ARGS LV1_8_IN_ARGS, LV1_1_OUT_ARGS + +#define LV1_0_IN_2_OUT_ARGS LV1_2_OUT_ARGS +#define LV1_1_IN_2_OUT_ARGS LV1_1_IN_ARGS, LV1_2_OUT_ARGS +#define LV1_2_IN_2_OUT_ARGS LV1_2_IN_ARGS, LV1_2_OUT_ARGS +#define LV1_3_IN_2_OUT_ARGS LV1_3_IN_ARGS, LV1_2_OUT_ARGS +#define LV1_4_IN_2_OUT_ARGS LV1_4_IN_ARGS, LV1_2_OUT_ARGS +#define LV1_5_IN_2_OUT_ARGS LV1_5_IN_ARGS, LV1_2_OUT_ARGS +#define LV1_6_IN_2_OUT_ARGS LV1_6_IN_ARGS, LV1_2_OUT_ARGS +#define LV1_7_IN_2_OUT_ARGS LV1_7_IN_ARGS, LV1_2_OUT_ARGS + +#define LV1_0_IN_3_OUT_ARGS LV1_3_OUT_ARGS +#define LV1_1_IN_3_OUT_ARGS LV1_1_IN_ARGS, LV1_3_OUT_ARGS +#define LV1_2_IN_3_OUT_ARGS LV1_2_IN_ARGS, LV1_3_OUT_ARGS +#define LV1_3_IN_3_OUT_ARGS LV1_3_IN_ARGS, LV1_3_OUT_ARGS +#define LV1_4_IN_3_OUT_ARGS LV1_4_IN_ARGS, LV1_3_OUT_ARGS +#define LV1_5_IN_3_OUT_ARGS LV1_5_IN_ARGS, LV1_3_OUT_ARGS +#define LV1_6_IN_3_OUT_ARGS LV1_6_IN_ARGS, LV1_3_OUT_ARGS +#define LV1_7_IN_3_OUT_ARGS LV1_7_IN_ARGS, LV1_3_OUT_ARGS + +#define LV1_0_IN_4_OUT_ARGS LV1_4_OUT_ARGS +#define LV1_1_IN_4_OUT_ARGS LV1_1_IN_ARGS, LV1_4_OUT_ARGS +#define LV1_2_IN_4_OUT_ARGS LV1_2_IN_ARGS, LV1_4_OUT_ARGS +#define LV1_3_IN_4_OUT_ARGS LV1_3_IN_ARGS, LV1_4_OUT_ARGS +#define LV1_4_IN_4_OUT_ARGS LV1_4_IN_ARGS, LV1_4_OUT_ARGS +#define LV1_5_IN_4_OUT_ARGS LV1_5_IN_ARGS, LV1_4_OUT_ARGS +#define LV1_6_IN_4_OUT_ARGS LV1_6_IN_ARGS, LV1_4_OUT_ARGS +#define LV1_7_IN_4_OUT_ARGS LV1_7_IN_ARGS, LV1_4_OUT_ARGS + +#define LV1_0_IN_5_OUT_ARGS LV1_5_OUT_ARGS +#define LV1_1_IN_5_OUT_ARGS LV1_1_IN_ARGS, LV1_5_OUT_ARGS +#define LV1_2_IN_5_OUT_ARGS LV1_2_IN_ARGS, LV1_5_OUT_ARGS +#define LV1_3_IN_5_OUT_ARGS LV1_3_IN_ARGS, LV1_5_OUT_ARGS +#define LV1_4_IN_5_OUT_ARGS LV1_4_IN_ARGS, LV1_5_OUT_ARGS +#define LV1_5_IN_5_OUT_ARGS LV1_5_IN_ARGS, LV1_5_OUT_ARGS +#define LV1_6_IN_5_OUT_ARGS LV1_6_IN_ARGS, LV1_5_OUT_ARGS +#define LV1_7_IN_5_OUT_ARGS LV1_7_IN_ARGS, LV1_5_OUT_ARGS + +#define LV1_0_IN_6_OUT_ARGS LV1_6_OUT_ARGS +#define LV1_1_IN_6_OUT_ARGS LV1_1_IN_ARGS, LV1_6_OUT_ARGS +#define LV1_2_IN_6_OUT_ARGS LV1_2_IN_ARGS, LV1_6_OUT_ARGS +#define LV1_3_IN_6_OUT_ARGS LV1_3_IN_ARGS, LV1_6_OUT_ARGS +#define LV1_4_IN_6_OUT_ARGS LV1_4_IN_ARGS, LV1_6_OUT_ARGS +#define LV1_5_IN_6_OUT_ARGS LV1_5_IN_ARGS, LV1_6_OUT_ARGS +#define LV1_6_IN_6_OUT_ARGS LV1_6_IN_ARGS, LV1_6_OUT_ARGS +#define LV1_7_IN_6_OUT_ARGS LV1_7_IN_ARGS, LV1_6_OUT_ARGS + +#define LV1_0_IN_7_OUT_ARGS LV1_7_OUT_ARGS +#define LV1_1_IN_7_OUT_ARGS LV1_1_IN_ARGS, LV1_7_OUT_ARGS +#define LV1_2_IN_7_OUT_ARGS LV1_2_IN_ARGS, LV1_7_OUT_ARGS +#define LV1_3_IN_7_OUT_ARGS LV1_3_IN_ARGS, LV1_7_OUT_ARGS +#define LV1_4_IN_7_OUT_ARGS LV1_4_IN_ARGS, LV1_7_OUT_ARGS +#define LV1_5_IN_7_OUT_ARGS LV1_5_IN_ARGS, LV1_7_OUT_ARGS +#define LV1_6_IN_7_OUT_ARGS LV1_6_IN_ARGS, LV1_7_OUT_ARGS +#define LV1_7_IN_7_OUT_ARGS LV1_7_IN_ARGS, LV1_7_OUT_ARGS + +/* + * This LV1_CALL() macro is for use by callers. It expands into an + * inline call wrapper and an underscored HV call declaration. The + * wrapper can be used to instrument the lv1 call interface. The + * file lv1call.S defines its own LV1_CALL() macro to expand into + * the actual underscored call definition. + */ + +#if !defined(LV1_CALL) +#define LV1_CALL(name, in, out, num) \ + extern s64 _lv1_##name(LV1_##in##_IN_##out##_OUT_ARG_DECL); \ + static inline int lv1_##name(LV1_##in##_IN_##out##_OUT_ARG_DECL) \ + {return _lv1_##name(LV1_##in##_IN_##out##_OUT_ARGS);} +#endif + +#endif /* !defined(__ASSEMBLY__) */ + +/* lv1 call table */ + +LV1_CALL(allocate_memory, 4, 2, 0 ) +LV1_CALL(write_htab_entry, 4, 0, 1 ) +LV1_CALL(construct_virtual_address_space, 3, 2, 2 ) +LV1_CALL(invalidate_htab_entries, 5, 0, 3 ) +LV1_CALL(get_virtual_address_space_id_of_ppe, 1, 1, 4 ) +LV1_CALL(query_logical_partition_address_region_info, 1, 5, 6 ) +LV1_CALL(select_virtual_address_space, 1, 0, 7 ) +LV1_CALL(pause, 1, 0, 9 ) +LV1_CALL(destruct_virtual_address_space, 1, 0, 10 ) +LV1_CALL(configure_irq_state_bitmap, 3, 0, 11 ) +LV1_CALL(connect_irq_plug_ext, 5, 0, 12 ) +LV1_CALL(release_memory, 1, 0, 13 ) +LV1_CALL(put_iopte, 5, 0, 15 ) +LV1_CALL(disconnect_irq_plug_ext, 3, 0, 17 ) +LV1_CALL(construct_event_receive_port, 0, 1, 18 ) +LV1_CALL(destruct_event_receive_port, 1, 0, 19 ) +LV1_CALL(send_event_locally, 1, 0, 24 ) +LV1_CALL(end_of_interrupt, 1, 0, 27 ) +LV1_CALL(connect_irq_plug, 2, 0, 28 ) +LV1_CALL(disconnect_irq_plug, 1, 0, 29 ) +LV1_CALL(end_of_interrupt_ext, 3, 0, 30 ) +LV1_CALL(did_update_interrupt_mask, 2, 0, 31 ) +LV1_CALL(shutdown_logical_partition, 1, 0, 44 ) +LV1_CALL(destruct_logical_spe, 1, 0, 54 ) +LV1_CALL(construct_logical_spe, 7, 6, 57 ) +LV1_CALL(set_spe_interrupt_mask, 3, 0, 61 ) +LV1_CALL(set_spe_transition_notifier, 3, 0, 64 ) +LV1_CALL(disable_logical_spe, 2, 0, 65 ) +LV1_CALL(clear_spe_interrupt_status, 4, 0, 66 ) +LV1_CALL(get_spe_interrupt_status, 2, 1, 67 ) +LV1_CALL(get_logical_ppe_id, 0, 1, 69 ) +LV1_CALL(set_interrupt_mask, 5, 0, 73 ) +LV1_CALL(get_logical_partition_id, 0, 1, 74 ) +LV1_CALL(configure_execution_time_variable, 1, 0, 77 ) +LV1_CALL(get_spe_irq_outlet, 2, 1, 78 ) +LV1_CALL(set_spe_privilege_state_area_1_register, 3, 0, 79 ) +LV1_CALL(create_repository_node, 6, 0, 90 ) +LV1_CALL(get_repository_node_value, 5, 2, 91 ) +LV1_CALL(modify_repository_node_value, 6, 0, 92 ) +LV1_CALL(remove_repository_node, 4, 0, 93 ) +LV1_CALL(read_htab_entries, 2, 5, 95 ) +LV1_CALL(set_dabr, 2, 0, 96 ) +LV1_CALL(get_total_execution_time, 2, 1, 103 ) +LV1_CALL(allocate_io_segment, 3, 1, 116 ) +LV1_CALL(release_io_segment, 2, 0, 117 ) +LV1_CALL(construct_io_irq_outlet, 1, 1, 120 ) +LV1_CALL(destruct_io_irq_outlet, 1, 0, 121 ) +LV1_CALL(map_htab, 1, 1, 122 ) +LV1_CALL(unmap_htab, 1, 0, 123 ) +LV1_CALL(get_version_info, 0, 1, 127 ) +LV1_CALL(insert_htab_entry, 6, 3, 158 ) +LV1_CALL(read_virtual_uart, 3, 1, 162 ) +LV1_CALL(write_virtual_uart, 3, 1, 163 ) +LV1_CALL(set_virtual_uart_param, 3, 0, 164 ) +LV1_CALL(get_virtual_uart_param, 2, 1, 165 ) +LV1_CALL(configure_virtual_uart_irq, 1, 1, 166 ) +LV1_CALL(open_device, 3, 0, 170 ) +LV1_CALL(close_device, 2, 0, 171 ) +LV1_CALL(map_device_mmio_region, 5, 1, 172 ) +LV1_CALL(unmap_device_mmio_region, 3, 0, 173 ) +LV1_CALL(allocate_device_dma_region, 5, 1, 174 ) +LV1_CALL(free_device_dma_region, 3, 0, 175 ) +LV1_CALL(map_device_dma_region, 6, 0, 176 ) +LV1_CALL(unmap_device_dma_region, 4, 0, 177 ) +LV1_CALL(net_add_multicast_address, 4, 0, 185 ) +LV1_CALL(net_remove_multicast_address, 4, 0, 186 ) +LV1_CALL(net_start_tx_dma, 4, 0, 187 ) +LV1_CALL(net_stop_tx_dma, 3, 0, 188 ) +LV1_CALL(net_start_rx_dma, 4, 0, 189 ) +LV1_CALL(net_stop_rx_dma, 3, 0, 190 ) +LV1_CALL(net_set_interrupt_status_indicator, 4, 0, 191 ) +LV1_CALL(net_set_interrupt_mask, 4, 0, 193 ) +LV1_CALL(net_control, 6, 2, 194 ) +LV1_CALL(connect_interrupt_event_receive_port, 4, 0, 197 ) +LV1_CALL(disconnect_interrupt_event_receive_port, 4, 0, 198 ) +LV1_CALL(get_spe_all_interrupt_statuses, 1, 1, 199 ) +LV1_CALL(deconfigure_virtual_uart_irq, 0, 0, 202 ) +LV1_CALL(enable_logical_spe, 2, 0, 207 ) +LV1_CALL(gpu_open, 1, 0, 210 ) +LV1_CALL(gpu_close, 0, 0, 211 ) +LV1_CALL(gpu_device_map, 1, 2, 212 ) +LV1_CALL(gpu_device_unmap, 1, 0, 213 ) +LV1_CALL(gpu_memory_allocate, 5, 2, 214 ) +LV1_CALL(gpu_memory_free, 1, 0, 216 ) +LV1_CALL(gpu_context_allocate, 2, 5, 217 ) +LV1_CALL(gpu_context_free, 1, 0, 218 ) +LV1_CALL(gpu_context_iomap, 5, 0, 221 ) +LV1_CALL(gpu_context_attribute, 6, 0, 225 ) +LV1_CALL(gpu_context_intr, 1, 1, 227 ) +LV1_CALL(gpu_attribute, 5, 0, 228 ) +LV1_CALL(get_rtc, 0, 2, 232 ) +LV1_CALL(set_ppe_periodic_tracer_frequency, 1, 0, 240 ) +LV1_CALL(start_ppe_periodic_tracer, 5, 0, 241 ) +LV1_CALL(stop_ppe_periodic_tracer, 1, 1, 242 ) +LV1_CALL(storage_read, 6, 1, 245 ) +LV1_CALL(storage_write, 6, 1, 246 ) +LV1_CALL(storage_send_device_command, 6, 1, 248 ) +LV1_CALL(storage_get_async_status, 1, 2, 249 ) +LV1_CALL(storage_check_async_status, 2, 1, 254 ) +LV1_CALL(panic, 1, 0, 255 ) +LV1_CALL(construct_lpm, 6, 3, 140 ) +LV1_CALL(destruct_lpm, 1, 0, 141 ) +LV1_CALL(start_lpm, 1, 0, 142 ) +LV1_CALL(stop_lpm, 1, 1, 143 ) +LV1_CALL(copy_lpm_trace_buffer, 3, 1, 144 ) +LV1_CALL(add_lpm_event_bookmark, 5, 0, 145 ) +LV1_CALL(delete_lpm_event_bookmark, 3, 0, 146 ) +LV1_CALL(set_lpm_interrupt_mask, 3, 1, 147 ) +LV1_CALL(get_lpm_interrupt_status, 1, 1, 148 ) +LV1_CALL(set_lpm_general_control, 5, 2, 149 ) +LV1_CALL(set_lpm_interval, 3, 1, 150 ) +LV1_CALL(set_lpm_trigger_control, 3, 1, 151 ) +LV1_CALL(set_lpm_counter_control, 4, 1, 152 ) +LV1_CALL(set_lpm_group_control, 3, 1, 153 ) +LV1_CALL(set_lpm_debug_bus_control, 3, 1, 154 ) +LV1_CALL(set_lpm_counter, 5, 2, 155 ) +LV1_CALL(set_lpm_signal, 7, 0, 156 ) +LV1_CALL(set_lpm_spr_trigger, 2, 0, 157 ) + +#endif diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h new file mode 100644 index 00000000000..893aafd87fd --- /dev/null +++ b/arch/powerpc/include/asm/machdep.h @@ -0,0 +1,365 @@ +#ifndef _ASM_POWERPC_MACHDEP_H +#define _ASM_POWERPC_MACHDEP_H +#ifdef __KERNEL__ + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include + +#include + +/* We export this macro for external modules like Alsa to know if + * ppc_md.feature_call is implemented or not + */ +#define CONFIG_PPC_HAS_FEATURE_CALLS + +struct pt_regs; +struct pci_bus; +struct device_node; +struct iommu_table; +struct rtc_time; +struct file; +struct pci_controller; +#ifdef CONFIG_KEXEC +struct kimage; +#endif + +#ifdef CONFIG_SMP +struct smp_ops_t { + void (*message_pass)(int target, int msg); + int (*probe)(void); + void (*kick_cpu)(int nr); + void (*setup_cpu)(int nr); + void (*take_timebase)(void); + void (*give_timebase)(void); + int (*cpu_enable)(unsigned int nr); + int (*cpu_disable)(void); + void (*cpu_die)(unsigned int nr); + int (*cpu_bootable)(unsigned int nr); +}; +#endif + +struct machdep_calls { + char *name; +#ifdef CONFIG_PPC64 + void (*hpte_invalidate)(unsigned long slot, + unsigned long va, + int psize, int ssize, + int local); + long (*hpte_updatepp)(unsigned long slot, + unsigned long newpp, + unsigned long va, + int psize, int ssize, + int local); + void (*hpte_updateboltedpp)(unsigned long newpp, + unsigned long ea, + int psize, int ssize); + long (*hpte_insert)(unsigned long hpte_group, + unsigned long va, + unsigned long prpn, + unsigned long rflags, + unsigned long vflags, + int psize, int ssize); + long (*hpte_remove)(unsigned long hpte_group); + void (*hpte_removebolted)(unsigned long ea, + int psize, int ssize); + void (*flush_hash_range)(unsigned long number, int local); + + /* special for kexec, to be called in real mode, linar mapping is + * destroyed as well */ + void (*hpte_clear_all)(void); + + int (*tce_build)(struct iommu_table *tbl, + long index, + long npages, + unsigned long uaddr, + enum dma_data_direction direction, + struct dma_attrs *attrs); + void (*tce_free)(struct iommu_table *tbl, + long index, + long npages); + unsigned long (*tce_get)(struct iommu_table *tbl, + long index); + void (*tce_flush)(struct iommu_table *tbl); + void (*pci_dma_dev_setup)(struct pci_dev *dev); + void (*pci_dma_bus_setup)(struct pci_bus *bus); + + void __iomem * (*ioremap)(phys_addr_t addr, unsigned long size, + unsigned long flags); + void (*iounmap)(volatile void __iomem *token); + +#ifdef CONFIG_PM + void (*iommu_save)(void); + void (*iommu_restore)(void); +#endif +#endif /* CONFIG_PPC64 */ + + int (*probe)(void); + void (*setup_arch)(void); /* Optional, may be NULL */ + void (*init_early)(void); + /* Optional, may be NULL. */ + void (*show_cpuinfo)(struct seq_file *m); + void (*show_percpuinfo)(struct seq_file *m, int i); + + void (*init_IRQ)(void); + unsigned int (*get_irq)(void); +#ifdef CONFIG_KEXEC + void (*kexec_cpu_down)(int crash_shutdown, int secondary); +#endif + + /* PCI stuff */ + /* Called after scanning the bus, before allocating resources */ + void (*pcibios_fixup)(void); + int (*pci_probe_mode)(struct pci_bus *); + void (*pci_irq_fixup)(struct pci_dev *dev); + + /* To setup PHBs when using automatic OF platform driver for PCI */ + int (*pci_setup_phb)(struct pci_controller *host); + +#ifdef CONFIG_PCI_MSI + int (*msi_check_device)(struct pci_dev* dev, + int nvec, int type); + int (*setup_msi_irqs)(struct pci_dev *dev, + int nvec, int type); + void (*teardown_msi_irqs)(struct pci_dev *dev); +#endif + + void (*restart)(char *cmd); + void (*power_off)(void); + void (*halt)(void); + void (*panic)(char *str); + void (*cpu_die)(void); + + long (*time_init)(void); /* Optional, may be NULL */ + + int (*set_rtc_time)(struct rtc_time *); + void (*get_rtc_time)(struct rtc_time *); + unsigned long (*get_boot_time)(void); + unsigned char (*rtc_read_val)(int addr); + void (*rtc_write_val)(int addr, unsigned char val); + + void (*calibrate_decr)(void); + + void (*progress)(char *, unsigned short); + + /* Interface for platform error logging */ + void (*log_error)(char *buf, unsigned int err_type, int fatal); + + unsigned char (*nvram_read_val)(int addr); + void (*nvram_write_val)(int addr, unsigned char val); + ssize_t (*nvram_write)(char *buf, size_t count, loff_t *index); + ssize_t (*nvram_read)(char *buf, size_t count, loff_t *index); + ssize_t (*nvram_size)(void); + void (*nvram_sync)(void); + + /* Exception handlers */ + int (*system_reset_exception)(struct pt_regs *regs); + int (*machine_check_exception)(struct pt_regs *regs); + + /* Motherboard/chipset features. This is a kind of general purpose + * hook used to control some machine specific features (like reset + * lines, chip power control, etc...). + */ + long (*feature_call)(unsigned int feature, ...); + + /* Get legacy PCI/IDE interrupt mapping */ + int (*pci_get_legacy_ide_irq)(struct pci_dev *dev, int channel); + + /* Get access protection for /dev/mem */ + pgprot_t (*phys_mem_access_prot)(struct file *file, + unsigned long pfn, + unsigned long size, + pgprot_t vma_prot); + + /* Idle loop for this platform, leave empty for default idle loop */ + void (*idle_loop)(void); + + /* + * Function for waiting for work with reduced power in idle loop; + * called with interrupts disabled. + */ + void (*power_save)(void); + + /* Function to enable performance monitor counters for this + platform, called once per cpu. */ + void (*enable_pmcs)(void); + + /* Set DABR for this platform, leave empty for default implemenation */ + int (*set_dabr)(unsigned long dabr); + +#ifdef CONFIG_PPC32 /* XXX for now */ + /* A general init function, called by ppc_init in init/main.c. + May be NULL. */ + void (*init)(void); + + void (*kgdb_map_scc)(void); + + /* + * optional PCI "hooks" + */ + /* Called in indirect_* to avoid touching devices */ + int (*pci_exclude_device)(struct pci_controller *, unsigned char, unsigned char); + + /* Called at then very end of pcibios_init() */ + void (*pcibios_after_init)(void); + +#endif /* CONFIG_PPC32 */ + + /* Called after PPC generic resource fixup to perform + machine specific fixups */ + void (*pcibios_fixup_resources)(struct pci_dev *); + + /* Called for each PCI bus in the system when it's probed */ + void (*pcibios_fixup_bus)(struct pci_bus *); + + /* Called when pci_enable_device() is called. Returns 0 to + * allow assignment/enabling of the device. */ + int (*pcibios_enable_device_hook)(struct pci_dev *); + + /* Called to shutdown machine specific hardware not already controlled + * by other drivers. + */ + void (*machine_shutdown)(void); + +#ifdef CONFIG_KEXEC + /* Called to do the minimal shutdown needed to run a kexec'd kernel + * to run successfully. + * XXX Should we move this one out of kexec scope? + */ + void (*machine_crash_shutdown)(struct pt_regs *regs); + + /* Called to do what every setup is needed on image and the + * reboot code buffer. Returns 0 on success. + * Provide your own (maybe dummy) implementation if your platform + * claims to support kexec. + */ + int (*machine_kexec_prepare)(struct kimage *image); + + /* Called to handle any machine specific cleanup on image */ + void (*machine_kexec_cleanup)(struct kimage *image); + + /* Called to perform the _real_ kexec. + * Do NOT allocate memory or fail here. We are past the point of + * no return. + */ + void (*machine_kexec)(struct kimage *image); +#endif /* CONFIG_KEXEC */ + +#ifdef CONFIG_SUSPEND + /* These are called to disable and enable, respectively, IRQs when + * entering a suspend state. If NULL, then the generic versions + * will be called. The generic versions disable/enable the + * decrementer along with interrupts. + */ + void (*suspend_disable_irqs)(void); + void (*suspend_enable_irqs)(void); +#endif +}; + +extern void e500_idle(void); +extern void power4_idle(void); +extern void power4_cpu_offline_powersave(void); +extern void ppc6xx_idle(void); + +/* + * ppc_md contains a copy of the machine description structure for the + * current platform. machine_id contains the initial address where the + * description was found during boot. + */ +extern struct machdep_calls ppc_md; +extern struct machdep_calls *machine_id; + +#define __machine_desc __attribute__ ((__section__ (".machine.desc"))) + +#define define_machine(name) \ + extern struct machdep_calls mach_##name; \ + EXPORT_SYMBOL(mach_##name); \ + struct machdep_calls mach_##name __machine_desc = + +#define machine_is(name) \ + ({ \ + extern struct machdep_calls mach_##name \ + __attribute__((weak)); \ + machine_id == &mach_##name; \ + }) + +extern void probe_machine(void); + +extern char cmd_line[COMMAND_LINE_SIZE]; + +#ifdef CONFIG_PPC_PMAC +/* + * Power macintoshes have either a CUDA, PMU or SMU controlling + * system reset, power, NVRAM, RTC. + */ +typedef enum sys_ctrler_kind { + SYS_CTRLER_UNKNOWN = 0, + SYS_CTRLER_CUDA = 1, + SYS_CTRLER_PMU = 2, + SYS_CTRLER_SMU = 3, +} sys_ctrler_t; +extern sys_ctrler_t sys_ctrler; + +#endif /* CONFIG_PPC_PMAC */ + +extern void setup_pci_ptrs(void); + +#ifdef CONFIG_SMP +/* Poor default implementations */ +extern void __devinit smp_generic_give_timebase(void); +extern void __devinit smp_generic_take_timebase(void); +#endif /* CONFIG_SMP */ + + +/* Functions to produce codes on the leds. + * The SRC code should be unique for the message category and should + * be limited to the lower 24 bits (the upper 8 are set by these funcs), + * and (for boot & dump) should be sorted numerically in the order + * the events occur. + */ +/* Print a boot progress message. */ +void ppc64_boot_msg(unsigned int src, const char *msg); +/* Print a termination message (print only -- does not stop the kernel) */ +void ppc64_terminate_msg(unsigned int src, const char *msg); + +static inline void log_error(char *buf, unsigned int err_type, int fatal) +{ + if (ppc_md.log_error) + ppc_md.log_error(buf, err_type, fatal); +} + +#define __define_machine_initcall(mach,level,fn,id) \ + static int __init __machine_initcall_##mach##_##fn(void) { \ + if (machine_is(mach)) return fn(); \ + return 0; \ + } \ + __define_initcall(level,__machine_initcall_##mach##_##fn,id); + +#define machine_core_initcall(mach,fn) __define_machine_initcall(mach,"1",fn,1) +#define machine_core_initcall_sync(mach,fn) __define_machine_initcall(mach,"1s",fn,1s) +#define machine_postcore_initcall(mach,fn) __define_machine_initcall(mach,"2",fn,2) +#define machine_postcore_initcall_sync(mach,fn) __define_machine_initcall(mach,"2s",fn,2s) +#define machine_arch_initcall(mach,fn) __define_machine_initcall(mach,"3",fn,3) +#define machine_arch_initcall_sync(mach,fn) __define_machine_initcall(mach,"3s",fn,3s) +#define machine_subsys_initcall(mach,fn) __define_machine_initcall(mach,"4",fn,4) +#define machine_subsys_initcall_sync(mach,fn) __define_machine_initcall(mach,"4s",fn,4s) +#define machine_fs_initcall(mach,fn) __define_machine_initcall(mach,"5",fn,5) +#define machine_fs_initcall_sync(mach,fn) __define_machine_initcall(mach,"5s",fn,5s) +#define machine_rootfs_initcall(mach,fn) __define_machine_initcall(mach,"rootfs",fn,rootfs) +#define machine_device_initcall(mach,fn) __define_machine_initcall(mach,"6",fn,6) +#define machine_device_initcall_sync(mach,fn) __define_machine_initcall(mach,"6s",fn,6s) +#define machine_late_initcall(mach,fn) __define_machine_initcall(mach,"7",fn,7) +#define machine_late_initcall_sync(mach,fn) __define_machine_initcall(mach,"7s",fn,7s) + +void generic_suspend_disable_irqs(void); +void generic_suspend_enable_irqs(void); + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_MACHDEP_H */ diff --git a/arch/powerpc/include/asm/macio.h b/arch/powerpc/include/asm/macio.h new file mode 100644 index 00000000000..079c06eae44 --- /dev/null +++ b/arch/powerpc/include/asm/macio.h @@ -0,0 +1,142 @@ +#ifndef __MACIO_ASIC_H__ +#define __MACIO_ASIC_H__ +#ifdef __KERNEL__ + +#include + +extern struct bus_type macio_bus_type; + +/* MacIO device driver is defined later */ +struct macio_driver; +struct macio_chip; + +#define MACIO_DEV_COUNT_RESOURCES 8 +#define MACIO_DEV_COUNT_IRQS 8 + +/* + * the macio_bus structure is used to describe a "virtual" bus + * within a MacIO ASIC. It's typically provided by a macio_pci_asic + * PCI device, but could be provided differently as well (nubus + * machines using a fake OF tree). + * + * The pdev field can be NULL on non-PCI machines + */ +struct macio_bus +{ + struct macio_chip *chip; /* macio_chip (private use) */ + int index; /* macio chip index in system */ +#ifdef CONFIG_PCI + struct pci_dev *pdev; /* PCI device hosting this bus */ +#endif +}; + +/* + * the macio_dev structure is used to describe a device + * within an Apple MacIO ASIC. + */ +struct macio_dev +{ + struct macio_bus *bus; /* macio bus this device is on */ + struct macio_dev *media_bay; /* Device is part of a media bay */ + struct of_device ofdev; + int n_resources; + struct resource resource[MACIO_DEV_COUNT_RESOURCES]; + int n_interrupts; + struct resource interrupt[MACIO_DEV_COUNT_IRQS]; +}; +#define to_macio_device(d) container_of(d, struct macio_dev, ofdev.dev) +#define of_to_macio_device(d) container_of(d, struct macio_dev, ofdev) + +extern struct macio_dev *macio_dev_get(struct macio_dev *dev); +extern void macio_dev_put(struct macio_dev *dev); + +/* + * Accessors to resources & interrupts and other device + * fields + */ + +static inline int macio_resource_count(struct macio_dev *dev) +{ + return dev->n_resources; +} + +static inline unsigned long macio_resource_start(struct macio_dev *dev, int resource_no) +{ + return dev->resource[resource_no].start; +} + +static inline unsigned long macio_resource_end(struct macio_dev *dev, int resource_no) +{ + return dev->resource[resource_no].end; +} + +static inline unsigned long macio_resource_len(struct macio_dev *dev, int resource_no) +{ + struct resource *res = &dev->resource[resource_no]; + if (res->start == 0 || res->end == 0 || res->end < res->start) + return 0; + return res->end - res->start + 1; +} + +extern int macio_request_resource(struct macio_dev *dev, int resource_no, const char *name); +extern void macio_release_resource(struct macio_dev *dev, int resource_no); +extern int macio_request_resources(struct macio_dev *dev, const char *name); +extern void macio_release_resources(struct macio_dev *dev); + +static inline int macio_irq_count(struct macio_dev *dev) +{ + return dev->n_interrupts; +} + +static inline int macio_irq(struct macio_dev *dev, int irq_no) +{ + return dev->interrupt[irq_no].start; +} + +static inline void macio_set_drvdata(struct macio_dev *dev, void *data) +{ + dev_set_drvdata(&dev->ofdev.dev, data); +} + +static inline void* macio_get_drvdata(struct macio_dev *dev) +{ + return dev_get_drvdata(&dev->ofdev.dev); +} + +static inline struct device_node *macio_get_of_node(struct macio_dev *mdev) +{ + return mdev->ofdev.node; +} + +#ifdef CONFIG_PCI +static inline struct pci_dev *macio_get_pci_dev(struct macio_dev *mdev) +{ + return mdev->bus->pdev; +} +#endif + +/* + * A driver for a mac-io chip based device + */ +struct macio_driver +{ + char *name; + struct of_device_id *match_table; + struct module *owner; + + int (*probe)(struct macio_dev* dev, const struct of_device_id *match); + int (*remove)(struct macio_dev* dev); + + int (*suspend)(struct macio_dev* dev, pm_message_t state); + int (*resume)(struct macio_dev* dev); + int (*shutdown)(struct macio_dev* dev); + + struct device_driver driver; +}; +#define to_macio_driver(drv) container_of(drv,struct macio_driver, driver) + +extern int macio_register_driver(struct macio_driver *); +extern void macio_unregister_driver(struct macio_driver *); + +#endif /* __KERNEL__ */ +#endif /* __MACIO_ASIC_H__ */ diff --git a/arch/powerpc/include/asm/mc146818rtc.h b/arch/powerpc/include/asm/mc146818rtc.h new file mode 100644 index 00000000000..f2741c8b59a --- /dev/null +++ b/arch/powerpc/include/asm/mc146818rtc.h @@ -0,0 +1,36 @@ +#ifndef _ASM_POWERPC_MC146818RTC_H +#define _ASM_POWERPC_MC146818RTC_H + +/* + * Machine dependent access functions for RTC registers. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifdef __KERNEL__ + +#include + +#ifndef RTC_PORT +#define RTC_PORT(x) (0x70 + (x)) +#define RTC_ALWAYS_BCD 1 /* RTC operates in binary mode */ +#endif + +/* + * The yet supported machines all access the RTC index register via + * an ISA port access but the way to access the date register differs ... + */ +#define CMOS_READ(addr) ({ \ +outb_p((addr),RTC_PORT(0)); \ +inb_p(RTC_PORT(1)); \ +}) +#define CMOS_WRITE(val, addr) ({ \ +outb_p((addr),RTC_PORT(0)); \ +outb_p((val),RTC_PORT(1)); \ +}) + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_MC146818RTC_H */ diff --git a/arch/powerpc/include/asm/mediabay.h b/arch/powerpc/include/asm/mediabay.h new file mode 100644 index 00000000000..b2efb332580 --- /dev/null +++ b/arch/powerpc/include/asm/mediabay.h @@ -0,0 +1,43 @@ +/* + * mediabay.h: definitions for using the media bay + * on PowerBook 3400 and similar computers. + * + * Copyright (C) 1997 Paul Mackerras. + */ +#ifndef _PPC_MEDIABAY_H +#define _PPC_MEDIABAY_H + +#ifdef __KERNEL__ + +#define MB_FD 0 /* media bay contains floppy drive (automatic eject ?) */ +#define MB_FD1 1 /* media bay contains floppy drive (manual eject ?) */ +#define MB_SOUND 2 /* sound device ? */ +#define MB_CD 3 /* media bay contains ATA drive such as CD or ZIP */ +#define MB_PCI 5 /* media bay contains a PCI device */ +#define MB_POWER 6 /* media bay contains a Power device (???) */ +#define MB_NO 7 /* media bay contains nothing */ + +/* Number of bays in the machine or 0 */ +extern int media_bay_count; + +#ifdef CONFIG_BLK_DEV_IDE_PMAC +#include + +int check_media_bay_by_base(unsigned long base, int what); +/* called by IDE PMAC host driver to register IDE controller for media bay */ +int media_bay_set_ide_infos(struct device_node *which_bay, unsigned long base, + int irq, ide_hwif_t *hwif); + +int check_media_bay(struct device_node *which_bay, int what); + +#else + +static inline int check_media_bay(struct device_node *which_bay, int what) +{ + return -ENODEV; +} + +#endif + +#endif /* __KERNEL__ */ +#endif /* _PPC_MEDIABAY_H */ diff --git a/arch/powerpc/include/asm/mman.h b/arch/powerpc/include/asm/mman.h new file mode 100644 index 00000000000..9209f755763 --- /dev/null +++ b/arch/powerpc/include/asm/mman.h @@ -0,0 +1,63 @@ +#ifndef _ASM_POWERPC_MMAN_H +#define _ASM_POWERPC_MMAN_H + +#include + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#define PROT_SAO 0x10 /* Strong Access Ordering */ + +#define MAP_RENAME MAP_ANONYMOUS /* In SunOS terminology */ +#define MAP_NORESERVE 0x40 /* don't reserve swap pages */ +#define MAP_LOCKED 0x80 + +#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ +#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ +#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ + +#define MCL_CURRENT 0x2000 /* lock all currently mapped pages */ +#define MCL_FUTURE 0x4000 /* lock all additions to address space */ + +#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ +#define MAP_NONBLOCK 0x10000 /* do not block on IO */ + +#ifdef __KERNEL__ +#ifdef CONFIG_PPC64 + +#include +#include + +/* + * This file is included by linux/mman.h, so we can't use cacl_vm_prot_bits() + * here. How important is the optimization? + */ +static inline unsigned long arch_calc_vm_prot_bits(unsigned long prot) +{ + return (prot & PROT_SAO) ? VM_SAO : 0; +} +#define arch_calc_vm_prot_bits(prot) arch_calc_vm_prot_bits(prot) + +static inline pgprot_t arch_vm_get_page_prot(unsigned long vm_flags) +{ + return (vm_flags & VM_SAO) ? __pgprot(_PAGE_SAO) : 0; +} +#define arch_vm_get_page_prot(vm_flags) arch_vm_get_page_prot(vm_flags) + +static inline int arch_validate_prot(unsigned long prot) +{ + if (prot & ~(PROT_READ | PROT_WRITE | PROT_EXEC | PROT_SEM | PROT_SAO)) + return 0; + if ((prot & PROT_SAO) && !cpu_has_feature(CPU_FTR_SAO)) + return 0; + return 1; +} +#define arch_validate_prot(prot) arch_validate_prot(prot) + +#endif /* CONFIG_PPC64 */ +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_MMAN_H */ diff --git a/arch/powerpc/include/asm/mmu-40x.h b/arch/powerpc/include/asm/mmu-40x.h new file mode 100644 index 00000000000..3d108676584 --- /dev/null +++ b/arch/powerpc/include/asm/mmu-40x.h @@ -0,0 +1,63 @@ +#ifndef _ASM_POWERPC_MMU_40X_H_ +#define _ASM_POWERPC_MMU_40X_H_ + +/* + * PPC40x support + */ + +#define PPC40X_TLB_SIZE 64 + +/* + * TLB entries are defined by a "high" tag portion and a "low" data + * portion. On all architectures, the data portion is 32-bits. + * + * TLB entries are managed entirely under software control by reading, + * writing, and searchoing using the 4xx-specific tlbre, tlbwr, and tlbsx + * instructions. + */ + +#define TLB_LO 1 +#define TLB_HI 0 + +#define TLB_DATA TLB_LO +#define TLB_TAG TLB_HI + +/* Tag portion */ + +#define TLB_EPN_MASK 0xFFFFFC00 /* Effective Page Number */ +#define TLB_PAGESZ_MASK 0x00000380 +#define TLB_PAGESZ(x) (((x) & 0x7) << 7) +#define PAGESZ_1K 0 +#define PAGESZ_4K 1 +#define PAGESZ_16K 2 +#define PAGESZ_64K 3 +#define PAGESZ_256K 4 +#define PAGESZ_1M 5 +#define PAGESZ_4M 6 +#define PAGESZ_16M 7 +#define TLB_VALID 0x00000040 /* Entry is valid */ + +/* Data portion */ + +#define TLB_RPN_MASK 0xFFFFFC00 /* Real Page Number */ +#define TLB_PERM_MASK 0x00000300 +#define TLB_EX 0x00000200 /* Instruction execution allowed */ +#define TLB_WR 0x00000100 /* Writes permitted */ +#define TLB_ZSEL_MASK 0x000000F0 +#define TLB_ZSEL(x) (((x) & 0xF) << 4) +#define TLB_ATTR_MASK 0x0000000F +#define TLB_W 0x00000008 /* Caching is write-through */ +#define TLB_I 0x00000004 /* Caching is inhibited */ +#define TLB_M 0x00000002 /* Memory is coherent */ +#define TLB_G 0x00000001 /* Memory is guarded from prefetch */ + +#ifndef __ASSEMBLY__ + +typedef struct { + unsigned long id; + unsigned long vdso_base; +} mm_context_t; + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_MMU_40X_H_ */ diff --git a/arch/powerpc/include/asm/mmu-44x.h b/arch/powerpc/include/asm/mmu-44x.h new file mode 100644 index 00000000000..a825524c981 --- /dev/null +++ b/arch/powerpc/include/asm/mmu-44x.h @@ -0,0 +1,76 @@ +#ifndef _ASM_POWERPC_MMU_44X_H_ +#define _ASM_POWERPC_MMU_44X_H_ +/* + * PPC440 support + */ + +#define PPC44x_MMUCR_TID 0x000000ff +#define PPC44x_MMUCR_STS 0x00010000 + +#define PPC44x_TLB_PAGEID 0 +#define PPC44x_TLB_XLAT 1 +#define PPC44x_TLB_ATTRIB 2 + +/* Page identification fields */ +#define PPC44x_TLB_EPN_MASK 0xfffffc00 /* Effective Page Number */ +#define PPC44x_TLB_VALID 0x00000200 /* Valid flag */ +#define PPC44x_TLB_TS 0x00000100 /* Translation address space */ +#define PPC44x_TLB_1K 0x00000000 /* Page sizes */ +#define PPC44x_TLB_4K 0x00000010 +#define PPC44x_TLB_16K 0x00000020 +#define PPC44x_TLB_64K 0x00000030 +#define PPC44x_TLB_256K 0x00000040 +#define PPC44x_TLB_1M 0x00000050 +#define PPC44x_TLB_16M 0x00000070 +#define PPC44x_TLB_256M 0x00000090 + +/* Translation fields */ +#define PPC44x_TLB_RPN_MASK 0xfffffc00 /* Real Page Number */ +#define PPC44x_TLB_ERPN_MASK 0x0000000f + +/* Storage attribute and access control fields */ +#define PPC44x_TLB_ATTR_MASK 0x0000ff80 +#define PPC44x_TLB_U0 0x00008000 /* User 0 */ +#define PPC44x_TLB_U1 0x00004000 /* User 1 */ +#define PPC44x_TLB_U2 0x00002000 /* User 2 */ +#define PPC44x_TLB_U3 0x00001000 /* User 3 */ +#define PPC44x_TLB_W 0x00000800 /* Caching is write-through */ +#define PPC44x_TLB_I 0x00000400 /* Caching is inhibited */ +#define PPC44x_TLB_M 0x00000200 /* Memory is coherent */ +#define PPC44x_TLB_G 0x00000100 /* Memory is guarded */ +#define PPC44x_TLB_E 0x00000080 /* Memory is guarded */ + +#define PPC44x_TLB_PERM_MASK 0x0000003f +#define PPC44x_TLB_UX 0x00000020 /* User execution */ +#define PPC44x_TLB_UW 0x00000010 /* User write */ +#define PPC44x_TLB_UR 0x00000008 /* User read */ +#define PPC44x_TLB_SX 0x00000004 /* Super execution */ +#define PPC44x_TLB_SW 0x00000002 /* Super write */ +#define PPC44x_TLB_SR 0x00000001 /* Super read */ + +/* Number of TLB entries */ +#define PPC44x_TLB_SIZE 64 + +#ifndef __ASSEMBLY__ + +extern unsigned int tlb_44x_hwater; + +typedef struct { + unsigned long id; + unsigned long vdso_base; +} mm_context_t; + +#endif /* !__ASSEMBLY__ */ + +#ifndef CONFIG_PPC_EARLY_DEBUG_44x +#define PPC44x_EARLY_TLBS 1 +#else +#define PPC44x_EARLY_TLBS 2 +#define PPC44x_EARLY_DEBUG_VIRTADDR (ASM_CONST(0xf0000000) \ + | (ASM_CONST(CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW) & 0xffff)) +#endif + +/* Size of the TLBs used for pinning in lowmem */ +#define PPC_PIN_SIZE (1 << 28) /* 256M */ + +#endif /* _ASM_POWERPC_MMU_44X_H_ */ diff --git a/arch/powerpc/include/asm/mmu-8xx.h b/arch/powerpc/include/asm/mmu-8xx.h new file mode 100644 index 00000000000..9db877eb88d --- /dev/null +++ b/arch/powerpc/include/asm/mmu-8xx.h @@ -0,0 +1,145 @@ +#ifndef _ASM_POWERPC_MMU_8XX_H_ +#define _ASM_POWERPC_MMU_8XX_H_ +/* + * PPC8xx support + */ + +/* Control/status registers for the MPC8xx. + * A write operation to these registers causes serialized access. + * During software tablewalk, the registers used perform mask/shift-add + * operations when written/read. A TLB entry is created when the Mx_RPN + * is written, and the contents of several registers are used to + * create the entry. + */ +#define SPRN_MI_CTR 784 /* Instruction TLB control register */ +#define MI_GPM 0x80000000 /* Set domain manager mode */ +#define MI_PPM 0x40000000 /* Set subpage protection */ +#define MI_CIDEF 0x20000000 /* Set cache inhibit when MMU dis */ +#define MI_RSV4I 0x08000000 /* Reserve 4 TLB entries */ +#define MI_PPCS 0x02000000 /* Use MI_RPN prob/priv state */ +#define MI_IDXMASK 0x00001f00 /* TLB index to be loaded */ +#define MI_RESETVAL 0x00000000 /* Value of register at reset */ + +/* These are the Ks and Kp from the PowerPC books. For proper operation, + * Ks = 0, Kp = 1. + */ +#define SPRN_MI_AP 786 +#define MI_Ks 0x80000000 /* Should not be set */ +#define MI_Kp 0x40000000 /* Should always be set */ + +/* The effective page number register. When read, contains the information + * about the last instruction TLB miss. When MI_RPN is written, bits in + * this register are used to create the TLB entry. + */ +#define SPRN_MI_EPN 787 +#define MI_EPNMASK 0xfffff000 /* Effective page number for entry */ +#define MI_EVALID 0x00000200 /* Entry is valid */ +#define MI_ASIDMASK 0x0000000f /* ASID match value */ + /* Reset value is undefined */ + +/* A "level 1" or "segment" or whatever you want to call it register. + * For the instruction TLB, it contains bits that get loaded into the + * TLB entry when the MI_RPN is written. + */ +#define SPRN_MI_TWC 789 +#define MI_APG 0x000001e0 /* Access protection group (0) */ +#define MI_GUARDED 0x00000010 /* Guarded storage */ +#define MI_PSMASK 0x0000000c /* Mask of page size bits */ +#define MI_PS8MEG 0x0000000c /* 8M page size */ +#define MI_PS512K 0x00000004 /* 512K page size */ +#define MI_PS4K_16K 0x00000000 /* 4K or 16K page size */ +#define MI_SVALID 0x00000001 /* Segment entry is valid */ + /* Reset value is undefined */ + +/* Real page number. Defined by the pte. Writing this register + * causes a TLB entry to be created for the instruction TLB, using + * additional information from the MI_EPN, and MI_TWC registers. + */ +#define SPRN_MI_RPN 790 + +/* Define an RPN value for mapping kernel memory to large virtual + * pages for boot initialization. This has real page number of 0, + * large page size, shared page, cache enabled, and valid. + * Also mark all subpages valid and write access. + */ +#define MI_BOOTINIT 0x000001fd + +#define SPRN_MD_CTR 792 /* Data TLB control register */ +#define MD_GPM 0x80000000 /* Set domain manager mode */ +#define MD_PPM 0x40000000 /* Set subpage protection */ +#define MD_CIDEF 0x20000000 /* Set cache inhibit when MMU dis */ +#define MD_WTDEF 0x10000000 /* Set writethrough when MMU dis */ +#define MD_RSV4I 0x08000000 /* Reserve 4 TLB entries */ +#define MD_TWAM 0x04000000 /* Use 4K page hardware assist */ +#define MD_PPCS 0x02000000 /* Use MI_RPN prob/priv state */ +#define MD_IDXMASK 0x00001f00 /* TLB index to be loaded */ +#define MD_RESETVAL 0x04000000 /* Value of register at reset */ + +#define SPRN_M_CASID 793 /* Address space ID (context) to match */ +#define MC_ASIDMASK 0x0000000f /* Bits used for ASID value */ + + +/* These are the Ks and Kp from the PowerPC books. For proper operation, + * Ks = 0, Kp = 1. + */ +#define SPRN_MD_AP 794 +#define MD_Ks 0x80000000 /* Should not be set */ +#define MD_Kp 0x40000000 /* Should always be set */ + +/* The effective page number register. When read, contains the information + * about the last instruction TLB miss. When MD_RPN is written, bits in + * this register are used to create the TLB entry. + */ +#define SPRN_MD_EPN 795 +#define MD_EPNMASK 0xfffff000 /* Effective page number for entry */ +#define MD_EVALID 0x00000200 /* Entry is valid */ +#define MD_ASIDMASK 0x0000000f /* ASID match value */ + /* Reset value is undefined */ + +/* The pointer to the base address of the first level page table. + * During a software tablewalk, reading this register provides the address + * of the entry associated with MD_EPN. + */ +#define SPRN_M_TWB 796 +#define M_L1TB 0xfffff000 /* Level 1 table base address */ +#define M_L1INDX 0x00000ffc /* Level 1 index, when read */ + /* Reset value is undefined */ + +/* A "level 1" or "segment" or whatever you want to call it register. + * For the data TLB, it contains bits that get loaded into the TLB entry + * when the MD_RPN is written. It is also provides the hardware assist + * for finding the PTE address during software tablewalk. + */ +#define SPRN_MD_TWC 797 +#define MD_L2TB 0xfffff000 /* Level 2 table base address */ +#define MD_L2INDX 0xfffffe00 /* Level 2 index (*pte), when read */ +#define MD_APG 0x000001e0 /* Access protection group (0) */ +#define MD_GUARDED 0x00000010 /* Guarded storage */ +#define MD_PSMASK 0x0000000c /* Mask of page size bits */ +#define MD_PS8MEG 0x0000000c /* 8M page size */ +#define MD_PS512K 0x00000004 /* 512K page size */ +#define MD_PS4K_16K 0x00000000 /* 4K or 16K page size */ +#define MD_WT 0x00000002 /* Use writethrough page attribute */ +#define MD_SVALID 0x00000001 /* Segment entry is valid */ + /* Reset value is undefined */ + + +/* Real page number. Defined by the pte. Writing this register + * causes a TLB entry to be created for the data TLB, using + * additional information from the MD_EPN, and MD_TWC registers. + */ +#define SPRN_MD_RPN 798 + +/* This is a temporary storage register that could be used to save + * a processor working register during a tablewalk. + */ +#define SPRN_M_TW 799 + +#ifndef __ASSEMBLY__ +typedef struct { + unsigned long id; + unsigned long vdso_base; +} mm_context_t; +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_MMU_8XX_H_ */ diff --git a/arch/powerpc/include/asm/mmu-fsl-booke.h b/arch/powerpc/include/asm/mmu-fsl-booke.h new file mode 100644 index 00000000000..925d93cf64d --- /dev/null +++ b/arch/powerpc/include/asm/mmu-fsl-booke.h @@ -0,0 +1,82 @@ +#ifndef _ASM_POWERPC_MMU_FSL_BOOKE_H_ +#define _ASM_POWERPC_MMU_FSL_BOOKE_H_ +/* + * Freescale Book-E MMU support + */ + +/* Book-E defined page sizes */ +#define BOOKE_PAGESZ_1K 0 +#define BOOKE_PAGESZ_4K 1 +#define BOOKE_PAGESZ_16K 2 +#define BOOKE_PAGESZ_64K 3 +#define BOOKE_PAGESZ_256K 4 +#define BOOKE_PAGESZ_1M 5 +#define BOOKE_PAGESZ_4M 6 +#define BOOKE_PAGESZ_16M 7 +#define BOOKE_PAGESZ_64M 8 +#define BOOKE_PAGESZ_256M 9 +#define BOOKE_PAGESZ_1GB 10 +#define BOOKE_PAGESZ_4GB 11 +#define BOOKE_PAGESZ_16GB 12 +#define BOOKE_PAGESZ_64GB 13 +#define BOOKE_PAGESZ_256GB 14 +#define BOOKE_PAGESZ_1TB 15 + +#define MAS0_TLBSEL(x) ((x << 28) & 0x30000000) +#define MAS0_ESEL(x) ((x << 16) & 0x0FFF0000) +#define MAS0_NV(x) ((x) & 0x00000FFF) + +#define MAS1_VALID 0x80000000 +#define MAS1_IPROT 0x40000000 +#define MAS1_TID(x) ((x << 16) & 0x3FFF0000) +#define MAS1_TS 0x00001000 +#define MAS1_TSIZE(x) ((x << 8) & 0x00000F00) + +#define MAS2_EPN 0xFFFFF000 +#define MAS2_X0 0x00000040 +#define MAS2_X1 0x00000020 +#define MAS2_W 0x00000010 +#define MAS2_I 0x00000008 +#define MAS2_M 0x00000004 +#define MAS2_G 0x00000002 +#define MAS2_E 0x00000001 + +#define MAS3_RPN 0xFFFFF000 +#define MAS3_U0 0x00000200 +#define MAS3_U1 0x00000100 +#define MAS3_U2 0x00000080 +#define MAS3_U3 0x00000040 +#define MAS3_UX 0x00000020 +#define MAS3_SX 0x00000010 +#define MAS3_UW 0x00000008 +#define MAS3_SW 0x00000004 +#define MAS3_UR 0x00000002 +#define MAS3_SR 0x00000001 + +#define MAS4_TLBSELD(x) MAS0_TLBSEL(x) +#define MAS4_TIDDSEL 0x000F0000 +#define MAS4_TSIZED(x) MAS1_TSIZE(x) +#define MAS4_X0D 0x00000040 +#define MAS4_X1D 0x00000020 +#define MAS4_WD 0x00000010 +#define MAS4_ID 0x00000008 +#define MAS4_MD 0x00000004 +#define MAS4_GD 0x00000002 +#define MAS4_ED 0x00000001 + +#define MAS6_SPID0 0x3FFF0000 +#define MAS6_SPID1 0x00007FFE +#define MAS6_SAS 0x00000001 +#define MAS6_SPID MAS6_SPID0 + +#define MAS7_RPN 0xFFFFFFFF + +#ifndef __ASSEMBLY__ + +typedef struct { + unsigned long id; + unsigned long vdso_base; +} mm_context_t; +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_MMU_FSL_BOOKE_H_ */ diff --git a/arch/powerpc/include/asm/mmu-hash32.h b/arch/powerpc/include/asm/mmu-hash32.h new file mode 100644 index 00000000000..16b1a1e77e6 --- /dev/null +++ b/arch/powerpc/include/asm/mmu-hash32.h @@ -0,0 +1,83 @@ +#ifndef _ASM_POWERPC_MMU_HASH32_H_ +#define _ASM_POWERPC_MMU_HASH32_H_ +/* + * 32-bit hash table MMU support + */ + +/* + * BATs + */ + +/* Block size masks */ +#define BL_128K 0x000 +#define BL_256K 0x001 +#define BL_512K 0x003 +#define BL_1M 0x007 +#define BL_2M 0x00F +#define BL_4M 0x01F +#define BL_8M 0x03F +#define BL_16M 0x07F +#define BL_32M 0x0FF +#define BL_64M 0x1FF +#define BL_128M 0x3FF +#define BL_256M 0x7FF + +/* BAT Access Protection */ +#define BPP_XX 0x00 /* No access */ +#define BPP_RX 0x01 /* Read only */ +#define BPP_RW 0x02 /* Read/write */ + +#ifndef __ASSEMBLY__ +/* Contort a phys_addr_t into the right format/bits for a BAT */ +#ifdef CONFIG_PHYS_64BIT +#define BAT_PHYS_ADDR(x) ((u32)((x & 0x00000000fffe0000ULL) | \ + ((x & 0x0000000e00000000ULL) >> 24) | \ + ((x & 0x0000000100000000ULL) >> 30))) +#else +#define BAT_PHYS_ADDR(x) (x) +#endif + +struct ppc_bat { + u32 batu; + u32 batl; +}; +#endif /* !__ASSEMBLY__ */ + +/* + * Hash table + */ + +/* Values for PP (assumes Ks=0, Kp=1) */ +#define PP_RWXX 0 /* Supervisor read/write, User none */ +#define PP_RWRX 1 /* Supervisor read/write, User read */ +#define PP_RWRW 2 /* Supervisor read/write, User read/write */ +#define PP_RXRX 3 /* Supervisor read, User read */ + +#ifndef __ASSEMBLY__ + +/* Hardware Page Table Entry */ +struct hash_pte { + unsigned long v:1; /* Entry is valid */ + unsigned long vsid:24; /* Virtual segment identifier */ + unsigned long h:1; /* Hash algorithm indicator */ + unsigned long api:6; /* Abbreviated page index */ + unsigned long rpn:20; /* Real (physical) page number */ + unsigned long :3; /* Unused */ + unsigned long r:1; /* Referenced */ + unsigned long c:1; /* Changed */ + unsigned long w:1; /* Write-thru cache mode */ + unsigned long i:1; /* Cache inhibited */ + unsigned long m:1; /* Memory coherence */ + unsigned long g:1; /* Guarded */ + unsigned long :1; /* Unused */ + unsigned long pp:2; /* Page protection */ +}; + +typedef struct { + unsigned long id; + unsigned long vdso_base; +} mm_context_t; + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_MMU_HASH32_H_ */ diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h new file mode 100644 index 00000000000..19c7a940349 --- /dev/null +++ b/arch/powerpc/include/asm/mmu-hash64.h @@ -0,0 +1,478 @@ +#ifndef _ASM_POWERPC_MMU_HASH64_H_ +#define _ASM_POWERPC_MMU_HASH64_H_ +/* + * PowerPC64 memory management structures + * + * Dave Engebretsen & Mike Corrigan <{engebret|mikejc}@us.ibm.com> + * PPC64 rework. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include + +/* + * Segment table + */ + +#define STE_ESID_V 0x80 +#define STE_ESID_KS 0x20 +#define STE_ESID_KP 0x10 +#define STE_ESID_N 0x08 + +#define STE_VSID_SHIFT 12 + +/* Location of cpu0's segment table */ +#define STAB0_PAGE 0x6 +#define STAB0_OFFSET (STAB0_PAGE << 12) +#define STAB0_PHYS_ADDR (STAB0_OFFSET + PHYSICAL_START) + +#ifndef __ASSEMBLY__ +extern char initial_stab[]; +#endif /* ! __ASSEMBLY */ + +/* + * SLB + */ + +#define SLB_NUM_BOLTED 3 +#define SLB_CACHE_ENTRIES 8 + +/* Bits in the SLB ESID word */ +#define SLB_ESID_V ASM_CONST(0x0000000008000000) /* valid */ + +/* Bits in the SLB VSID word */ +#define SLB_VSID_SHIFT 12 +#define SLB_VSID_SHIFT_1T 24 +#define SLB_VSID_SSIZE_SHIFT 62 +#define SLB_VSID_B ASM_CONST(0xc000000000000000) +#define SLB_VSID_B_256M ASM_CONST(0x0000000000000000) +#define SLB_VSID_B_1T ASM_CONST(0x4000000000000000) +#define SLB_VSID_KS ASM_CONST(0x0000000000000800) +#define SLB_VSID_KP ASM_CONST(0x0000000000000400) +#define SLB_VSID_N ASM_CONST(0x0000000000000200) /* no-execute */ +#define SLB_VSID_L ASM_CONST(0x0000000000000100) +#define SLB_VSID_C ASM_CONST(0x0000000000000080) /* class */ +#define SLB_VSID_LP ASM_CONST(0x0000000000000030) +#define SLB_VSID_LP_00 ASM_CONST(0x0000000000000000) +#define SLB_VSID_LP_01 ASM_CONST(0x0000000000000010) +#define SLB_VSID_LP_10 ASM_CONST(0x0000000000000020) +#define SLB_VSID_LP_11 ASM_CONST(0x0000000000000030) +#define SLB_VSID_LLP (SLB_VSID_L|SLB_VSID_LP) + +#define SLB_VSID_KERNEL (SLB_VSID_KP) +#define SLB_VSID_USER (SLB_VSID_KP|SLB_VSID_KS|SLB_VSID_C) + +#define SLBIE_C (0x08000000) +#define SLBIE_SSIZE_SHIFT 25 + +/* + * Hash table + */ + +#define HPTES_PER_GROUP 8 + +#define HPTE_V_SSIZE_SHIFT 62 +#define HPTE_V_AVPN_SHIFT 7 +#define HPTE_V_AVPN ASM_CONST(0x3fffffffffffff80) +#define HPTE_V_AVPN_VAL(x) (((x) & HPTE_V_AVPN) >> HPTE_V_AVPN_SHIFT) +#define HPTE_V_COMPARE(x,y) (!(((x) ^ (y)) & 0xffffffffffffff80UL)) +#define HPTE_V_BOLTED ASM_CONST(0x0000000000000010) +#define HPTE_V_LOCK ASM_CONST(0x0000000000000008) +#define HPTE_V_LARGE ASM_CONST(0x0000000000000004) +#define HPTE_V_SECONDARY ASM_CONST(0x0000000000000002) +#define HPTE_V_VALID ASM_CONST(0x0000000000000001) + +#define HPTE_R_PP0 ASM_CONST(0x8000000000000000) +#define HPTE_R_TS ASM_CONST(0x4000000000000000) +#define HPTE_R_RPN_SHIFT 12 +#define HPTE_R_RPN ASM_CONST(0x3ffffffffffff000) +#define HPTE_R_FLAGS ASM_CONST(0x00000000000003ff) +#define HPTE_R_PP ASM_CONST(0x0000000000000003) +#define HPTE_R_N ASM_CONST(0x0000000000000004) +#define HPTE_R_C ASM_CONST(0x0000000000000080) +#define HPTE_R_R ASM_CONST(0x0000000000000100) + +#define HPTE_V_1TB_SEG ASM_CONST(0x4000000000000000) +#define HPTE_V_VRMA_MASK ASM_CONST(0x4001ffffff000000) + +/* Values for PP (assumes Ks=0, Kp=1) */ +/* pp0 will always be 0 for linux */ +#define PP_RWXX 0 /* Supervisor read/write, User none */ +#define PP_RWRX 1 /* Supervisor read/write, User read */ +#define PP_RWRW 2 /* Supervisor read/write, User read/write */ +#define PP_RXRX 3 /* Supervisor read, User read */ + +#ifndef __ASSEMBLY__ + +struct hash_pte { + unsigned long v; + unsigned long r; +}; + +extern struct hash_pte *htab_address; +extern unsigned long htab_size_bytes; +extern unsigned long htab_hash_mask; + +/* + * Page size definition + * + * shift : is the "PAGE_SHIFT" value for that page size + * sllp : is a bit mask with the value of SLB L || LP to be or'ed + * directly to a slbmte "vsid" value + * penc : is the HPTE encoding mask for the "LP" field: + * + */ +struct mmu_psize_def +{ + unsigned int shift; /* number of bits */ + unsigned int penc; /* HPTE encoding */ + unsigned int tlbiel; /* tlbiel supported for that page size */ + unsigned long avpnm; /* bits to mask out in AVPN in the HPTE */ + unsigned long sllp; /* SLB L||LP (exact mask to use in slbmte) */ +}; + +#endif /* __ASSEMBLY__ */ + +/* + * The kernel use the constants below to index in the page sizes array. + * The use of fixed constants for this purpose is better for performances + * of the low level hash refill handlers. + * + * A non supported page size has a "shift" field set to 0 + * + * Any new page size being implemented can get a new entry in here. Whether + * the kernel will use it or not is a different matter though. The actual page + * size used by hugetlbfs is not defined here and may be made variable + */ + +#define MMU_PAGE_4K 0 /* 4K */ +#define MMU_PAGE_64K 1 /* 64K */ +#define MMU_PAGE_64K_AP 2 /* 64K Admixed (in a 4K segment) */ +#define MMU_PAGE_1M 3 /* 1M */ +#define MMU_PAGE_16M 4 /* 16M */ +#define MMU_PAGE_16G 5 /* 16G */ +#define MMU_PAGE_COUNT 6 + +/* + * Segment sizes. + * These are the values used by hardware in the B field of + * SLB entries and the first dword of MMU hashtable entries. + * The B field is 2 bits; the values 2 and 3 are unused and reserved. + */ +#define MMU_SEGSIZE_256M 0 +#define MMU_SEGSIZE_1T 1 + + +#ifndef __ASSEMBLY__ + +/* + * The current system page and segment sizes + */ +extern struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT]; +extern int mmu_linear_psize; +extern int mmu_virtual_psize; +extern int mmu_vmalloc_psize; +extern int mmu_vmemmap_psize; +extern int mmu_io_psize; +extern int mmu_kernel_ssize; +extern int mmu_highuser_ssize; +extern u16 mmu_slb_size; +extern unsigned long tce_alloc_start, tce_alloc_end; + +/* + * If the processor supports 64k normal pages but not 64k cache + * inhibited pages, we have to be prepared to switch processes + * to use 4k pages when they create cache-inhibited mappings. + * If this is the case, mmu_ci_restrictions will be set to 1. + */ +extern int mmu_ci_restrictions; + +#ifdef CONFIG_HUGETLB_PAGE +/* + * The page size indexes of the huge pages for use by hugetlbfs + */ +extern unsigned int mmu_huge_psizes[MMU_PAGE_COUNT]; + +#endif /* CONFIG_HUGETLB_PAGE */ + +/* + * This function sets the AVPN and L fields of the HPTE appropriately + * for the page size + */ +static inline unsigned long hpte_encode_v(unsigned long va, int psize, + int ssize) +{ + unsigned long v; + v = (va >> 23) & ~(mmu_psize_defs[psize].avpnm); + v <<= HPTE_V_AVPN_SHIFT; + if (psize != MMU_PAGE_4K) + v |= HPTE_V_LARGE; + v |= ((unsigned long) ssize) << HPTE_V_SSIZE_SHIFT; + return v; +} + +/* + * This function sets the ARPN, and LP fields of the HPTE appropriately + * for the page size. We assume the pa is already "clean" that is properly + * aligned for the requested page size + */ +static inline unsigned long hpte_encode_r(unsigned long pa, int psize) +{ + unsigned long r; + + /* A 4K page needs no special encoding */ + if (psize == MMU_PAGE_4K) + return pa & HPTE_R_RPN; + else { + unsigned int penc = mmu_psize_defs[psize].penc; + unsigned int shift = mmu_psize_defs[psize].shift; + return (pa & ~((1ul << shift) - 1)) | (penc << 12); + } + return r; +} + +/* + * Build a VA given VSID, EA and segment size + */ +static inline unsigned long hpt_va(unsigned long ea, unsigned long vsid, + int ssize) +{ + if (ssize == MMU_SEGSIZE_256M) + return (vsid << 28) | (ea & 0xfffffffUL); + return (vsid << 40) | (ea & 0xffffffffffUL); +} + +/* + * This hashes a virtual address + */ + +static inline unsigned long hpt_hash(unsigned long va, unsigned int shift, + int ssize) +{ + unsigned long hash, vsid; + + if (ssize == MMU_SEGSIZE_256M) { + hash = (va >> 28) ^ ((va & 0x0fffffffUL) >> shift); + } else { + vsid = va >> 40; + hash = vsid ^ (vsid << 25) ^ ((va & 0xffffffffffUL) >> shift); + } + return hash & 0x7fffffffffUL; +} + +extern int __hash_page_4K(unsigned long ea, unsigned long access, + unsigned long vsid, pte_t *ptep, unsigned long trap, + unsigned int local, int ssize, int subpage_prot); +extern int __hash_page_64K(unsigned long ea, unsigned long access, + unsigned long vsid, pte_t *ptep, unsigned long trap, + unsigned int local, int ssize); +struct mm_struct; +extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap); +extern int hash_huge_page(struct mm_struct *mm, unsigned long access, + unsigned long ea, unsigned long vsid, int local, + unsigned long trap); + +extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend, + unsigned long pstart, unsigned long mode, + int psize, int ssize); +extern void set_huge_psize(int psize); +extern void add_gpage(unsigned long addr, unsigned long page_size, + unsigned long number_of_pages); +extern void demote_segment_4k(struct mm_struct *mm, unsigned long addr); + +extern void htab_initialize(void); +extern void htab_initialize_secondary(void); +extern void hpte_init_native(void); +extern void hpte_init_lpar(void); +extern void hpte_init_iSeries(void); +extern void hpte_init_beat(void); +extern void hpte_init_beat_v3(void); + +extern void stabs_alloc(void); +extern void slb_initialize(void); +extern void slb_flush_and_rebolt(void); +extern void stab_initialize(unsigned long stab); + +extern void slb_vmalloc_update(void); +#endif /* __ASSEMBLY__ */ + +/* + * VSID allocation + * + * We first generate a 36-bit "proto-VSID". For kernel addresses this + * is equal to the ESID, for user addresses it is: + * (context << 15) | (esid & 0x7fff) + * + * The two forms are distinguishable because the top bit is 0 for user + * addresses, whereas the top two bits are 1 for kernel addresses. + * Proto-VSIDs with the top two bits equal to 0b10 are reserved for + * now. + * + * The proto-VSIDs are then scrambled into real VSIDs with the + * multiplicative hash: + * + * VSID = (proto-VSID * VSID_MULTIPLIER) % VSID_MODULUS + * where VSID_MULTIPLIER = 268435399 = 0xFFFFFC7 + * VSID_MODULUS = 2^36-1 = 0xFFFFFFFFF + * + * This scramble is only well defined for proto-VSIDs below + * 0xFFFFFFFFF, so both proto-VSID and actual VSID 0xFFFFFFFFF are + * reserved. VSID_MULTIPLIER is prime, so in particular it is + * co-prime to VSID_MODULUS, making this a 1:1 scrambling function. + * Because the modulus is 2^n-1 we can compute it efficiently without + * a divide or extra multiply (see below). + * + * This scheme has several advantages over older methods: + * + * - We have VSIDs allocated for every kernel address + * (i.e. everything above 0xC000000000000000), except the very top + * segment, which simplifies several things. + * + * - We allow for 15 significant bits of ESID and 20 bits of + * context for user addresses. i.e. 8T (43 bits) of address space for + * up to 1M contexts (although the page table structure and context + * allocation will need changes to take advantage of this). + * + * - The scramble function gives robust scattering in the hash + * table (at least based on some initial results). The previous + * method was more susceptible to pathological cases giving excessive + * hash collisions. + */ +/* + * WARNING - If you change these you must make sure the asm + * implementations in slb_allocate (slb_low.S), do_stab_bolted + * (head.S) and ASM_VSID_SCRAMBLE (below) are changed accordingly. + * + * You'll also need to change the precomputed VSID values in head.S + * which are used by the iSeries firmware. + */ + +#define VSID_MULTIPLIER_256M ASM_CONST(200730139) /* 28-bit prime */ +#define VSID_BITS_256M 36 +#define VSID_MODULUS_256M ((1UL<= \ + * 2^36-1, then r3+1 has the 2^36 bit set. So, if r3+1 has \ + * the bit clear, r3 already has the answer we want, if it \ + * doesn't, the answer is the low 36 bits of r3+1. So in all \ + * cases the answer is the low 36 bits of (r3 + ((r3+1) >> 36))*/\ + addi rx,rt,1; \ + srdi rx,rx,VSID_BITS_##size; /* extract 2^VSID_BITS bit */ \ + add rt,rt,rx + + +#ifndef __ASSEMBLY__ + +typedef unsigned long mm_context_id_t; + +typedef struct { + mm_context_id_t id; + u16 user_psize; /* page size index */ + +#ifdef CONFIG_PPC_MM_SLICES + u64 low_slices_psize; /* SLB page size encodings */ + u64 high_slices_psize; /* 4 bits per slice for now */ +#else + u16 sllp; /* SLB page size encoding */ +#endif + unsigned long vdso_base; +} mm_context_t; + + +#if 0 +/* + * The code below is equivalent to this function for arguments + * < 2^VSID_BITS, which is all this should ever be called + * with. However gcc is not clever enough to compute the + * modulus (2^n-1) without a second multiply. + */ +#define vsid_scrample(protovsid, size) \ + ((((protovsid) * VSID_MULTIPLIER_##size) % VSID_MODULUS_##size)) + +#else /* 1 */ +#define vsid_scramble(protovsid, size) \ + ({ \ + unsigned long x; \ + x = (protovsid) * VSID_MULTIPLIER_##size; \ + x = (x >> VSID_BITS_##size) + (x & VSID_MODULUS_##size); \ + (x + ((x+1) >> VSID_BITS_##size)) & VSID_MODULUS_##size; \ + }) +#endif /* 1 */ + +/* This is only valid for addresses >= KERNELBASE */ +static inline unsigned long get_kernel_vsid(unsigned long ea, int ssize) +{ + if (ssize == MMU_SEGSIZE_256M) + return vsid_scramble(ea >> SID_SHIFT, 256M); + return vsid_scramble(ea >> SID_SHIFT_1T, 1T); +} + +/* Returns the segment size indicator for a user address */ +static inline int user_segment_size(unsigned long addr) +{ + /* Use 1T segments if possible for addresses >= 1T */ + if (addr >= (1UL << SID_SHIFT_1T)) + return mmu_highuser_ssize; + return MMU_SEGSIZE_256M; +} + +/* This is only valid for user addresses (which are below 2^44) */ +static inline unsigned long get_vsid(unsigned long context, unsigned long ea, + int ssize) +{ + if (ssize == MMU_SEGSIZE_256M) + return vsid_scramble((context << USER_ESID_BITS) + | (ea >> SID_SHIFT), 256M); + return vsid_scramble((context << USER_ESID_BITS_1T) + | (ea >> SID_SHIFT_1T), 1T); +} + +/* + * This is only used on legacy iSeries in lparmap.c, + * hence the 256MB segment assumption. + */ +#define VSID_SCRAMBLE(pvsid) (((pvsid) * VSID_MULTIPLIER_256M) % \ + VSID_MODULUS_256M) +#define KERNEL_VSID(ea) VSID_SCRAMBLE(GET_ESID(ea)) + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_MMU_HASH64_H_ */ diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h new file mode 100644 index 00000000000..4c0e1b4f975 --- /dev/null +++ b/arch/powerpc/include/asm/mmu.h @@ -0,0 +1,26 @@ +#ifndef _ASM_POWERPC_MMU_H_ +#define _ASM_POWERPC_MMU_H_ +#ifdef __KERNEL__ + +#ifdef CONFIG_PPC64 +/* 64-bit classic hash table MMU */ +# include +#elif defined(CONFIG_PPC_STD_MMU) +/* 32-bit classic hash table MMU */ +# include +#elif defined(CONFIG_40x) +/* 40x-style software loaded TLB */ +# include +#elif defined(CONFIG_44x) +/* 44x-style software loaded TLB */ +# include +#elif defined(CONFIG_FSL_BOOKE) +/* Freescale Book-E software loaded TLB */ +# include +#elif defined (CONFIG_PPC_8xx) +/* Motorola/Freescale 8xx software loaded TLB */ +# include +#endif + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_MMU_H_ */ diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h new file mode 100644 index 00000000000..9102b8bf0ea --- /dev/null +++ b/arch/powerpc/include/asm/mmu_context.h @@ -0,0 +1,280 @@ +#ifndef __ASM_POWERPC_MMU_CONTEXT_H +#define __ASM_POWERPC_MMU_CONTEXT_H +#ifdef __KERNEL__ + +#include +#include +#include + +#ifndef CONFIG_PPC64 +#include +#include + +/* + * On 32-bit PowerPC 6xx/7xx/7xxx CPUs, we use a set of 16 VSIDs + * (virtual segment identifiers) for each context. Although the + * hardware supports 24-bit VSIDs, and thus >1 million contexts, + * we only use 32,768 of them. That is ample, since there can be + * at most around 30,000 tasks in the system anyway, and it means + * that we can use a bitmap to indicate which contexts are in use. + * Using a bitmap means that we entirely avoid all of the problems + * that we used to have when the context number overflowed, + * particularly on SMP systems. + * -- paulus. + */ + +/* + * This function defines the mapping from contexts to VSIDs (virtual + * segment IDs). We use a skew on both the context and the high 4 bits + * of the 32-bit virtual address (the "effective segment ID") in order + * to spread out the entries in the MMU hash table. Note, if this + * function is changed then arch/ppc/mm/hashtable.S will have to be + * changed to correspond. + */ +#define CTX_TO_VSID(ctx, va) (((ctx) * (897 * 16) + ((va) >> 28) * 0x111) \ + & 0xffffff) + +/* + The MPC8xx has only 16 contexts. We rotate through them on each + task switch. A better way would be to keep track of tasks that + own contexts, and implement an LRU usage. That way very active + tasks don't always have to pay the TLB reload overhead. The + kernel pages are mapped shared, so the kernel can run on behalf + of any task that makes a kernel entry. Shared does not mean they + are not protected, just that the ASID comparison is not performed. + -- Dan + + The IBM4xx has 256 contexts, so we can just rotate through these + as a way of "switching" contexts. If the TID of the TLB is zero, + the PID/TID comparison is disabled, so we can use a TID of zero + to represent all kernel pages as shared among all contexts. + -- Dan + */ + +static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) +{ +} + +#ifdef CONFIG_8xx +#define NO_CONTEXT 16 +#define LAST_CONTEXT 15 +#define FIRST_CONTEXT 0 + +#elif defined(CONFIG_4xx) +#define NO_CONTEXT 256 +#define LAST_CONTEXT 255 +#define FIRST_CONTEXT 1 + +#elif defined(CONFIG_E200) || defined(CONFIG_E500) +#define NO_CONTEXT 256 +#define LAST_CONTEXT 255 +#define FIRST_CONTEXT 1 + +#else + +/* PPC 6xx, 7xx CPUs */ +#define NO_CONTEXT ((unsigned long) -1) +#define LAST_CONTEXT 32767 +#define FIRST_CONTEXT 1 +#endif + +/* + * Set the current MMU context. + * On 32-bit PowerPCs (other than the 8xx embedded chips), this is done by + * loading up the segment registers for the user part of the address space. + * + * Since the PGD is immediately available, it is much faster to simply + * pass this along as a second parameter, which is required for 8xx and + * can be used for debugging on all processors (if you happen to have + * an Abatron). + */ +extern void set_context(unsigned long contextid, pgd_t *pgd); + +/* + * Bitmap of contexts in use. + * The size of this bitmap is LAST_CONTEXT + 1 bits. + */ +extern unsigned long context_map[]; + +/* + * This caches the next context number that we expect to be free. + * Its use is an optimization only, we can't rely on this context + * number to be free, but it usually will be. + */ +extern unsigned long next_mmu_context; + +/* + * If we don't have sufficient contexts to give one to every task + * that could be in the system, we need to be able to steal contexts. + * These variables support that. + */ +#if LAST_CONTEXT < 30000 +#define FEW_CONTEXTS 1 +extern atomic_t nr_free_contexts; +extern struct mm_struct *context_mm[LAST_CONTEXT+1]; +extern void steal_context(void); +#endif + +/* + * Get a new mmu context for the address space described by `mm'. + */ +static inline void get_mmu_context(struct mm_struct *mm) +{ + unsigned long ctx; + + if (mm->context.id != NO_CONTEXT) + return; +#ifdef FEW_CONTEXTS + while (atomic_dec_if_positive(&nr_free_contexts) < 0) + steal_context(); +#endif + ctx = next_mmu_context; + while (test_and_set_bit(ctx, context_map)) { + ctx = find_next_zero_bit(context_map, LAST_CONTEXT+1, ctx); + if (ctx > LAST_CONTEXT) + ctx = 0; + } + next_mmu_context = (ctx + 1) & LAST_CONTEXT; + mm->context.id = ctx; +#ifdef FEW_CONTEXTS + context_mm[ctx] = mm; +#endif +} + +/* + * Set up the context for a new address space. + */ +static inline int init_new_context(struct task_struct *t, struct mm_struct *mm) +{ + mm->context.id = NO_CONTEXT; + mm->context.vdso_base = 0; + return 0; +} + +/* + * We're finished using the context for an address space. + */ +static inline void destroy_context(struct mm_struct *mm) +{ + preempt_disable(); + if (mm->context.id != NO_CONTEXT) { + clear_bit(mm->context.id, context_map); + mm->context.id = NO_CONTEXT; +#ifdef FEW_CONTEXTS + atomic_inc(&nr_free_contexts); +#endif + } + preempt_enable(); +} + +static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, + struct task_struct *tsk) +{ +#ifdef CONFIG_ALTIVEC + if (cpu_has_feature(CPU_FTR_ALTIVEC)) + asm volatile ("dssall;\n" +#ifndef CONFIG_POWER4 + "sync;\n" /* G4 needs a sync here, G5 apparently not */ +#endif + : : ); +#endif /* CONFIG_ALTIVEC */ + + tsk->thread.pgdir = next->pgd; + + /* No need to flush userspace segments if the mm doesnt change */ + if (prev == next) + return; + + /* Setup new userspace context */ + get_mmu_context(next); + set_context(next->context.id, next->pgd); +} + +#define deactivate_mm(tsk,mm) do { } while (0) + +/* + * After we have set current->mm to a new value, this activates + * the context for the new mm so we see the new mappings. + */ +#define activate_mm(active_mm, mm) switch_mm(active_mm, mm, current) + +extern void mmu_context_init(void); + + +#else + +#include +#include +#include + +/* + * Copyright (C) 2001 PPC 64 Team, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +static inline void enter_lazy_tlb(struct mm_struct *mm, + struct task_struct *tsk) +{ +} + +/* + * The proto-VSID space has 2^35 - 1 segments available for user mappings. + * Each segment contains 2^28 bytes. Each context maps 2^44 bytes, + * so we can support 2^19-1 contexts (19 == 35 + 28 - 44). + */ +#define NO_CONTEXT 0 +#define MAX_CONTEXT ((1UL << 19) - 1) + +extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm); +extern void destroy_context(struct mm_struct *mm); + +extern void switch_stab(struct task_struct *tsk, struct mm_struct *mm); +extern void switch_slb(struct task_struct *tsk, struct mm_struct *mm); + +/* + * switch_mm is the entry point called from the architecture independent + * code in kernel/sched.c + */ +static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, + struct task_struct *tsk) +{ + if (!cpu_isset(smp_processor_id(), next->cpu_vm_mask)) + cpu_set(smp_processor_id(), next->cpu_vm_mask); + + /* No need to flush userspace segments if the mm doesnt change */ + if (prev == next) + return; + +#ifdef CONFIG_ALTIVEC + if (cpu_has_feature(CPU_FTR_ALTIVEC)) + asm volatile ("dssall"); +#endif /* CONFIG_ALTIVEC */ + + if (cpu_has_feature(CPU_FTR_SLB)) + switch_slb(tsk, next); + else + switch_stab(tsk, next); +} + +#define deactivate_mm(tsk,mm) do { } while (0) + +/* + * After we have set current->mm to a new value, this activates + * the context for the new mm so we see the new mappings. + */ +static inline void activate_mm(struct mm_struct *prev, struct mm_struct *next) +{ + unsigned long flags; + + local_irq_save(flags); + switch_mm(prev, next, current); + local_irq_restore(flags); +} + +#endif /* CONFIG_PPC64 */ +#endif /* __KERNEL__ */ +#endif /* __ASM_POWERPC_MMU_CONTEXT_H */ diff --git a/arch/powerpc/include/asm/mmzone.h b/arch/powerpc/include/asm/mmzone.h new file mode 100644 index 00000000000..19f299b7e25 --- /dev/null +++ b/arch/powerpc/include/asm/mmzone.h @@ -0,0 +1,47 @@ +/* + * Written by Kanoj Sarcar (kanoj@sgi.com) Aug 99 + * + * PowerPC64 port: + * Copyright (C) 2002 Anton Blanchard, IBM Corp. + */ +#ifndef _ASM_MMZONE_H_ +#define _ASM_MMZONE_H_ +#ifdef __KERNEL__ + + +/* + * generic non-linear memory support: + * + * 1) we will not split memory into more chunks than will fit into the + * flags field of the struct page + */ + +#ifdef CONFIG_NEED_MULTIPLE_NODES + +extern struct pglist_data *node_data[]; +/* + * Return a pointer to the node data for node n. + */ +#define NODE_DATA(nid) (node_data[nid]) + +/* + * Following are specific to this numa platform. + */ + +extern int numa_cpu_lookup_table[]; +extern cpumask_t numa_cpumask_lookup_table[]; +#ifdef CONFIG_MEMORY_HOTPLUG +extern unsigned long max_pfn; +#endif + +/* + * Following are macros that each numa implmentation must define. + */ + +#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn) +#define node_end_pfn(nid) (NODE_DATA(nid)->node_end_pfn) + +#endif /* CONFIG_NEED_MULTIPLE_NODES */ + +#endif /* __KERNEL__ */ +#endif /* _ASM_MMZONE_H_ */ diff --git a/arch/powerpc/include/asm/module.h b/arch/powerpc/include/asm/module.h new file mode 100644 index 00000000000..e5f14b13ccf --- /dev/null +++ b/arch/powerpc/include/asm/module.h @@ -0,0 +1,77 @@ +#ifndef _ASM_POWERPC_MODULE_H +#define _ASM_POWERPC_MODULE_H +#ifdef __KERNEL__ + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include + + +#ifndef __powerpc64__ +/* + * Thanks to Paul M for explaining this. + * + * PPC can only do rel jumps += 32MB, and often the kernel and other + * modules are furthur away than this. So, we jump to a table of + * trampolines attached to the module (the Procedure Linkage Table) + * whenever that happens. + */ + +struct ppc_plt_entry { + /* 16 byte jump instruction sequence (4 instructions) */ + unsigned int jump[4]; +}; +#endif /* __powerpc64__ */ + + +struct mod_arch_specific { +#ifdef __powerpc64__ + unsigned int stubs_section; /* Index of stubs section in module */ + unsigned int toc_section; /* What section is the TOC? */ +#else + /* Indices of PLT sections within module. */ + unsigned int core_plt_section; + unsigned int init_plt_section; +#endif + + /* List of BUG addresses, source line numbers and filenames */ + struct list_head bug_list; + struct bug_entry *bug_table; + unsigned int num_bugs; +}; + +/* + * Select ELF headers. + * Make empty section for module_frob_arch_sections to expand. + */ + +#ifdef __powerpc64__ +# define Elf_Shdr Elf64_Shdr +# define Elf_Sym Elf64_Sym +# define Elf_Ehdr Elf64_Ehdr +# ifdef MODULE + asm(".section .stubs,\"ax\",@nobits; .align 3; .previous"); +# endif +#else +# define Elf_Shdr Elf32_Shdr +# define Elf_Sym Elf32_Sym +# define Elf_Ehdr Elf32_Ehdr +# ifdef MODULE + asm(".section .plt,\"ax\",@nobits; .align 3; .previous"); + asm(".section .init.plt,\"ax\",@nobits; .align 3; .previous"); +# endif /* MODULE */ +#endif + + +struct exception_table_entry; +void sort_ex_table(struct exception_table_entry *start, + struct exception_table_entry *finish); + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_MODULE_H */ diff --git a/arch/powerpc/include/asm/mpc512x.h b/arch/powerpc/include/asm/mpc512x.h new file mode 100644 index 00000000000..c48a1658eea --- /dev/null +++ b/arch/powerpc/include/asm/mpc512x.h @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved. + * + * Author: John Rigby, , Friday Apr 13 2007 + * + * Description: + * MPC5121 Prototypes and definitions + * + * This is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#ifndef __ASM_POWERPC_MPC512x_H__ +#define __ASM_POWERPC_MPC512x_H__ + +extern unsigned long mpc512x_find_ips_freq(struct device_node *node); + +#endif /* __ASM_POWERPC_MPC512x_H__ */ + diff --git a/arch/powerpc/include/asm/mpc52xx.h b/arch/powerpc/include/asm/mpc52xx.h new file mode 100644 index 00000000000..81ef10b6b67 --- /dev/null +++ b/arch/powerpc/include/asm/mpc52xx.h @@ -0,0 +1,295 @@ +/* + * Prototypes, etc. for the Freescale MPC52xx embedded cpu chips + * May need to be cleaned as the port goes on ... + * + * Copyright (C) 2004-2005 Sylvain Munaut + * Copyright (C) 2003 MontaVista, Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef __ASM_POWERPC_MPC52xx_H__ +#define __ASM_POWERPC_MPC52xx_H__ + +#ifndef __ASSEMBLY__ +#include +#include +#endif /* __ASSEMBLY__ */ + +#include + +/* Variants of the 5200(B) */ +#define MPC5200_SVR 0x80110010 +#define MPC5200_SVR_MASK 0xfffffff0 +#define MPC5200B_SVR 0x80110020 +#define MPC5200B_SVR_MASK 0xfffffff0 + +/* ======================================================================== */ +/* Structures mapping of some unit register set */ +/* ======================================================================== */ + +#ifndef __ASSEMBLY__ + +/* Memory Mapping Control */ +struct mpc52xx_mmap_ctl { + u32 mbar; /* MMAP_CTRL + 0x00 */ + + u32 cs0_start; /* MMAP_CTRL + 0x04 */ + u32 cs0_stop; /* MMAP_CTRL + 0x08 */ + u32 cs1_start; /* MMAP_CTRL + 0x0c */ + u32 cs1_stop; /* MMAP_CTRL + 0x10 */ + u32 cs2_start; /* MMAP_CTRL + 0x14 */ + u32 cs2_stop; /* MMAP_CTRL + 0x18 */ + u32 cs3_start; /* MMAP_CTRL + 0x1c */ + u32 cs3_stop; /* MMAP_CTRL + 0x20 */ + u32 cs4_start; /* MMAP_CTRL + 0x24 */ + u32 cs4_stop; /* MMAP_CTRL + 0x28 */ + u32 cs5_start; /* MMAP_CTRL + 0x2c */ + u32 cs5_stop; /* MMAP_CTRL + 0x30 */ + + u32 sdram0; /* MMAP_CTRL + 0x34 */ + u32 sdram1; /* MMAP_CTRL + 0X38 */ + + u32 reserved[4]; /* MMAP_CTRL + 0x3c .. 0x48 */ + + u32 boot_start; /* MMAP_CTRL + 0x4c */ + u32 boot_stop; /* MMAP_CTRL + 0x50 */ + + u32 ipbi_ws_ctrl; /* MMAP_CTRL + 0x54 */ + + u32 cs6_start; /* MMAP_CTRL + 0x58 */ + u32 cs6_stop; /* MMAP_CTRL + 0x5c */ + u32 cs7_start; /* MMAP_CTRL + 0x60 */ + u32 cs7_stop; /* MMAP_CTRL + 0x64 */ +}; + +/* SDRAM control */ +struct mpc52xx_sdram { + u32 mode; /* SDRAM + 0x00 */ + u32 ctrl; /* SDRAM + 0x04 */ + u32 config1; /* SDRAM + 0x08 */ + u32 config2; /* SDRAM + 0x0c */ +}; + +/* SDMA */ +struct mpc52xx_sdma { + u32 taskBar; /* SDMA + 0x00 */ + u32 currentPointer; /* SDMA + 0x04 */ + u32 endPointer; /* SDMA + 0x08 */ + u32 variablePointer; /* SDMA + 0x0c */ + + u8 IntVect1; /* SDMA + 0x10 */ + u8 IntVect2; /* SDMA + 0x11 */ + u16 PtdCntrl; /* SDMA + 0x12 */ + + u32 IntPend; /* SDMA + 0x14 */ + u32 IntMask; /* SDMA + 0x18 */ + + u16 tcr[16]; /* SDMA + 0x1c .. 0x3a */ + + u8 ipr[32]; /* SDMA + 0x3c .. 0x5b */ + + u32 cReqSelect; /* SDMA + 0x5c */ + u32 task_size0; /* SDMA + 0x60 */ + u32 task_size1; /* SDMA + 0x64 */ + u32 MDEDebug; /* SDMA + 0x68 */ + u32 ADSDebug; /* SDMA + 0x6c */ + u32 Value1; /* SDMA + 0x70 */ + u32 Value2; /* SDMA + 0x74 */ + u32 Control; /* SDMA + 0x78 */ + u32 Status; /* SDMA + 0x7c */ + u32 PTDDebug; /* SDMA + 0x80 */ +}; + +/* GPT */ +struct mpc52xx_gpt { + u32 mode; /* GPTx + 0x00 */ + u32 count; /* GPTx + 0x04 */ + u32 pwm; /* GPTx + 0x08 */ + u32 status; /* GPTx + 0X0c */ +}; + +/* GPIO */ +struct mpc52xx_gpio { + u32 port_config; /* GPIO + 0x00 */ + u32 simple_gpioe; /* GPIO + 0x04 */ + u32 simple_ode; /* GPIO + 0x08 */ + u32 simple_ddr; /* GPIO + 0x0c */ + u32 simple_dvo; /* GPIO + 0x10 */ + u32 simple_ival; /* GPIO + 0x14 */ + u8 outo_gpioe; /* GPIO + 0x18 */ + u8 reserved1[3]; /* GPIO + 0x19 */ + u8 outo_dvo; /* GPIO + 0x1c */ + u8 reserved2[3]; /* GPIO + 0x1d */ + u8 sint_gpioe; /* GPIO + 0x20 */ + u8 reserved3[3]; /* GPIO + 0x21 */ + u8 sint_ode; /* GPIO + 0x24 */ + u8 reserved4[3]; /* GPIO + 0x25 */ + u8 sint_ddr; /* GPIO + 0x28 */ + u8 reserved5[3]; /* GPIO + 0x29 */ + u8 sint_dvo; /* GPIO + 0x2c */ + u8 reserved6[3]; /* GPIO + 0x2d */ + u8 sint_inten; /* GPIO + 0x30 */ + u8 reserved7[3]; /* GPIO + 0x31 */ + u16 sint_itype; /* GPIO + 0x34 */ + u16 reserved8; /* GPIO + 0x36 */ + u8 gpio_control; /* GPIO + 0x38 */ + u8 reserved9[3]; /* GPIO + 0x39 */ + u8 sint_istat; /* GPIO + 0x3c */ + u8 sint_ival; /* GPIO + 0x3d */ + u8 bus_errs; /* GPIO + 0x3e */ + u8 reserved10; /* GPIO + 0x3f */ +}; + +#define MPC52xx_GPIO_PSC_CONFIG_UART_WITHOUT_CD 4 +#define MPC52xx_GPIO_PSC_CONFIG_UART_WITH_CD 5 +#define MPC52xx_GPIO_PCI_DIS (1<<15) + +/* GPIO with WakeUp*/ +struct mpc52xx_gpio_wkup { + u8 wkup_gpioe; /* GPIO_WKUP + 0x00 */ + u8 reserved1[3]; /* GPIO_WKUP + 0x03 */ + u8 wkup_ode; /* GPIO_WKUP + 0x04 */ + u8 reserved2[3]; /* GPIO_WKUP + 0x05 */ + u8 wkup_ddr; /* GPIO_WKUP + 0x08 */ + u8 reserved3[3]; /* GPIO_WKUP + 0x09 */ + u8 wkup_dvo; /* GPIO_WKUP + 0x0C */ + u8 reserved4[3]; /* GPIO_WKUP + 0x0D */ + u8 wkup_inten; /* GPIO_WKUP + 0x10 */ + u8 reserved5[3]; /* GPIO_WKUP + 0x11 */ + u8 wkup_iinten; /* GPIO_WKUP + 0x14 */ + u8 reserved6[3]; /* GPIO_WKUP + 0x15 */ + u16 wkup_itype; /* GPIO_WKUP + 0x18 */ + u8 reserved7[2]; /* GPIO_WKUP + 0x1A */ + u8 wkup_maste; /* GPIO_WKUP + 0x1C */ + u8 reserved8[3]; /* GPIO_WKUP + 0x1D */ + u8 wkup_ival; /* GPIO_WKUP + 0x20 */ + u8 reserved9[3]; /* GPIO_WKUP + 0x21 */ + u8 wkup_istat; /* GPIO_WKUP + 0x24 */ + u8 reserved10[3]; /* GPIO_WKUP + 0x25 */ +}; + +/* XLB Bus control */ +struct mpc52xx_xlb { + u8 reserved[0x40]; + u32 config; /* XLB + 0x40 */ + u32 version; /* XLB + 0x44 */ + u32 status; /* XLB + 0x48 */ + u32 int_enable; /* XLB + 0x4c */ + u32 addr_capture; /* XLB + 0x50 */ + u32 bus_sig_capture; /* XLB + 0x54 */ + u32 addr_timeout; /* XLB + 0x58 */ + u32 data_timeout; /* XLB + 0x5c */ + u32 bus_act_timeout; /* XLB + 0x60 */ + u32 master_pri_enable; /* XLB + 0x64 */ + u32 master_priority; /* XLB + 0x68 */ + u32 base_address; /* XLB + 0x6c */ + u32 snoop_window; /* XLB + 0x70 */ +}; + +#define MPC52xx_XLB_CFG_PLDIS (1 << 31) +#define MPC52xx_XLB_CFG_SNOOP (1 << 15) + +/* Clock Distribution control */ +struct mpc52xx_cdm { + u32 jtag_id; /* CDM + 0x00 reg0 read only */ + u32 rstcfg; /* CDM + 0x04 reg1 read only */ + u32 breadcrumb; /* CDM + 0x08 reg2 */ + + u8 mem_clk_sel; /* CDM + 0x0c reg3 byte0 */ + u8 xlb_clk_sel; /* CDM + 0x0d reg3 byte1 read only */ + u8 ipb_clk_sel; /* CDM + 0x0e reg3 byte2 */ + u8 pci_clk_sel; /* CDM + 0x0f reg3 byte3 */ + + u8 ext_48mhz_en; /* CDM + 0x10 reg4 byte0 */ + u8 fd_enable; /* CDM + 0x11 reg4 byte1 */ + u16 fd_counters; /* CDM + 0x12 reg4 byte2,3 */ + + u32 clk_enables; /* CDM + 0x14 reg5 */ + + u8 osc_disable; /* CDM + 0x18 reg6 byte0 */ + u8 reserved0[3]; /* CDM + 0x19 reg6 byte1,2,3 */ + + u8 ccs_sleep_enable; /* CDM + 0x1c reg7 byte0 */ + u8 osc_sleep_enable; /* CDM + 0x1d reg7 byte1 */ + u8 reserved1; /* CDM + 0x1e reg7 byte2 */ + u8 ccs_qreq_test; /* CDM + 0x1f reg7 byte3 */ + + u8 soft_reset; /* CDM + 0x20 u8 byte0 */ + u8 no_ckstp; /* CDM + 0x21 u8 byte0 */ + u8 reserved2[2]; /* CDM + 0x22 u8 byte1,2,3 */ + + u8 pll_lock; /* CDM + 0x24 reg9 byte0 */ + u8 pll_looselock; /* CDM + 0x25 reg9 byte1 */ + u8 pll_sm_lockwin; /* CDM + 0x26 reg9 byte2 */ + u8 reserved3; /* CDM + 0x27 reg9 byte3 */ + + u16 reserved4; /* CDM + 0x28 reg10 byte0,1 */ + u16 mclken_div_psc1; /* CDM + 0x2a reg10 byte2,3 */ + + u16 reserved5; /* CDM + 0x2c reg11 byte0,1 */ + u16 mclken_div_psc2; /* CDM + 0x2e reg11 byte2,3 */ + + u16 reserved6; /* CDM + 0x30 reg12 byte0,1 */ + u16 mclken_div_psc3; /* CDM + 0x32 reg12 byte2,3 */ + + u16 reserved7; /* CDM + 0x34 reg13 byte0,1 */ + u16 mclken_div_psc6; /* CDM + 0x36 reg13 byte2,3 */ +}; + +#endif /* __ASSEMBLY__ */ + + +/* ========================================================================= */ +/* Prototypes for MPC52xx sysdev */ +/* ========================================================================= */ + +#ifndef __ASSEMBLY__ + +/* mpc52xx_common.c */ +extern unsigned int mpc52xx_find_ipb_freq(struct device_node *node); +extern void mpc5200_setup_xlb_arbiter(void); +extern void mpc52xx_declare_of_platform_devices(void); +extern void mpc52xx_map_common_devices(void); +extern int mpc52xx_set_psc_clkdiv(int psc_id, int clkdiv); +extern void mpc52xx_restart(char *cmd); + +/* mpc52xx_pic.c */ +extern void mpc52xx_init_irq(void); +extern unsigned int mpc52xx_get_irq(void); + +/* mpc52xx_pci.c */ +#ifdef CONFIG_PCI +extern int __init mpc52xx_add_bridge(struct device_node *node); +extern void __init mpc52xx_setup_pci(void); +#else +static inline void mpc52xx_setup_pci(void) { } +#endif + +#endif /* __ASSEMBLY__ */ + +#ifdef CONFIG_PM +struct mpc52xx_suspend { + void (*board_suspend_prepare)(void __iomem *mbar); + void (*board_resume_finish)(void __iomem *mbar); +}; + +extern struct mpc52xx_suspend mpc52xx_suspend; +extern int __init mpc52xx_pm_init(void); +extern int mpc52xx_set_wakeup_gpio(u8 pin, u8 level); + +#ifdef CONFIG_PPC_LITE5200 +extern int __init lite5200_pm_init(void); + +/* lite5200 calls mpc5200 suspend functions, so here they are */ +extern int mpc52xx_pm_prepare(void); +extern int mpc52xx_pm_enter(suspend_state_t); +extern void mpc52xx_pm_finish(void); +extern char saved_sram[0x4000]; /* reuse buffer from mpc52xx suspend */ +#endif +#endif /* CONFIG_PM */ + +#endif /* __ASM_POWERPC_MPC52xx_H__ */ + diff --git a/arch/powerpc/include/asm/mpc52xx_psc.h b/arch/powerpc/include/asm/mpc52xx_psc.h new file mode 100644 index 00000000000..8917ed63056 --- /dev/null +++ b/arch/powerpc/include/asm/mpc52xx_psc.h @@ -0,0 +1,276 @@ +/* + * include/asm-ppc/mpc52xx_psc.h + * + * Definitions of consts/structs to drive the Freescale MPC52xx OnChip + * PSCs. Theses are shared between multiple drivers since a PSC can be + * UART, AC97, IR, I2S, ... So this header is in asm-ppc. + * + * + * Maintainer : Sylvain Munaut + * + * Based/Extracted from some header of the 2.4 originally written by + * Dale Farnsworth + * + * Copyright (C) 2004 Sylvain Munaut + * Copyright (C) 2003 MontaVista, Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef __ASM_MPC52xx_PSC_H__ +#define __ASM_MPC52xx_PSC_H__ + +#include + +/* Max number of PSCs */ +#define MPC52xx_PSC_MAXNUM 6 + +/* Programmable Serial Controller (PSC) status register bits */ +#define MPC52xx_PSC_SR_CDE 0x0080 +#define MPC52xx_PSC_SR_RXRDY 0x0100 +#define MPC52xx_PSC_SR_RXFULL 0x0200 +#define MPC52xx_PSC_SR_TXRDY 0x0400 +#define MPC52xx_PSC_SR_TXEMP 0x0800 +#define MPC52xx_PSC_SR_OE 0x1000 +#define MPC52xx_PSC_SR_PE 0x2000 +#define MPC52xx_PSC_SR_FE 0x4000 +#define MPC52xx_PSC_SR_RB 0x8000 + +/* PSC Command values */ +#define MPC52xx_PSC_RX_ENABLE 0x0001 +#define MPC52xx_PSC_RX_DISABLE 0x0002 +#define MPC52xx_PSC_TX_ENABLE 0x0004 +#define MPC52xx_PSC_TX_DISABLE 0x0008 +#define MPC52xx_PSC_SEL_MODE_REG_1 0x0010 +#define MPC52xx_PSC_RST_RX 0x0020 +#define MPC52xx_PSC_RST_TX 0x0030 +#define MPC52xx_PSC_RST_ERR_STAT 0x0040 +#define MPC52xx_PSC_RST_BRK_CHG_INT 0x0050 +#define MPC52xx_PSC_START_BRK 0x0060 +#define MPC52xx_PSC_STOP_BRK 0x0070 + +/* PSC TxRx FIFO status bits */ +#define MPC52xx_PSC_RXTX_FIFO_ERR 0x0040 +#define MPC52xx_PSC_RXTX_FIFO_UF 0x0020 +#define MPC52xx_PSC_RXTX_FIFO_OF 0x0010 +#define MPC52xx_PSC_RXTX_FIFO_FR 0x0008 +#define MPC52xx_PSC_RXTX_FIFO_FULL 0x0004 +#define MPC52xx_PSC_RXTX_FIFO_ALARM 0x0002 +#define MPC52xx_PSC_RXTX_FIFO_EMPTY 0x0001 + +/* PSC interrupt status/mask bits */ +#define MPC52xx_PSC_IMR_TXRDY 0x0100 +#define MPC52xx_PSC_IMR_RXRDY 0x0200 +#define MPC52xx_PSC_IMR_DB 0x0400 +#define MPC52xx_PSC_IMR_TXEMP 0x0800 +#define MPC52xx_PSC_IMR_ORERR 0x1000 +#define MPC52xx_PSC_IMR_IPC 0x8000 + +/* PSC input port change bit */ +#define MPC52xx_PSC_CTS 0x01 +#define MPC52xx_PSC_DCD 0x02 +#define MPC52xx_PSC_D_CTS 0x10 +#define MPC52xx_PSC_D_DCD 0x20 + +/* PSC mode fields */ +#define MPC52xx_PSC_MODE_5_BITS 0x00 +#define MPC52xx_PSC_MODE_6_BITS 0x01 +#define MPC52xx_PSC_MODE_7_BITS 0x02 +#define MPC52xx_PSC_MODE_8_BITS 0x03 +#define MPC52xx_PSC_MODE_BITS_MASK 0x03 +#define MPC52xx_PSC_MODE_PAREVEN 0x00 +#define MPC52xx_PSC_MODE_PARODD 0x04 +#define MPC52xx_PSC_MODE_PARFORCE 0x08 +#define MPC52xx_PSC_MODE_PARNONE 0x10 +#define MPC52xx_PSC_MODE_ERR 0x20 +#define MPC52xx_PSC_MODE_FFULL 0x40 +#define MPC52xx_PSC_MODE_RXRTS 0x80 + +#define MPC52xx_PSC_MODE_ONE_STOP_5_BITS 0x00 +#define MPC52xx_PSC_MODE_ONE_STOP 0x07 +#define MPC52xx_PSC_MODE_TWO_STOP 0x0f + +#define MPC52xx_PSC_RFNUM_MASK 0x01ff + +#define MPC52xx_PSC_SICR_DTS1 (1 << 29) +#define MPC52xx_PSC_SICR_SHDR (1 << 28) +#define MPC52xx_PSC_SICR_SIM_MASK (0xf << 24) +#define MPC52xx_PSC_SICR_SIM_UART (0x0 << 24) +#define MPC52xx_PSC_SICR_SIM_UART_DCD (0x8 << 24) +#define MPC52xx_PSC_SICR_SIM_CODEC_8 (0x1 << 24) +#define MPC52xx_PSC_SICR_SIM_CODEC_16 (0x2 << 24) +#define MPC52xx_PSC_SICR_SIM_AC97 (0x3 << 24) +#define MPC52xx_PSC_SICR_SIM_SIR (0x8 << 24) +#define MPC52xx_PSC_SICR_SIM_SIR_DCD (0xc << 24) +#define MPC52xx_PSC_SICR_SIM_MIR (0x5 << 24) +#define MPC52xx_PSC_SICR_SIM_FIR (0x6 << 24) +#define MPC52xx_PSC_SICR_SIM_CODEC_24 (0x7 << 24) +#define MPC52xx_PSC_SICR_SIM_CODEC_32 (0xf << 24) +#define MPC52xx_PSC_SICR_GENCLK (1 << 23) +#define MPC52xx_PSC_SICR_I2S (1 << 22) +#define MPC52xx_PSC_SICR_CLKPOL (1 << 21) +#define MPC52xx_PSC_SICR_SYNCPOL (1 << 20) +#define MPC52xx_PSC_SICR_CELLSLAVE (1 << 19) +#define MPC52xx_PSC_SICR_CELL2XCLK (1 << 18) +#define MPC52xx_PSC_SICR_ESAI (1 << 17) +#define MPC52xx_PSC_SICR_ENAC97 (1 << 16) +#define MPC52xx_PSC_SICR_SPI (1 << 15) +#define MPC52xx_PSC_SICR_MSTR (1 << 14) +#define MPC52xx_PSC_SICR_CPOL (1 << 13) +#define MPC52xx_PSC_SICR_CPHA (1 << 12) +#define MPC52xx_PSC_SICR_USEEOF (1 << 11) +#define MPC52xx_PSC_SICR_DISABLEEOF (1 << 10) + +/* Structure of the hardware registers */ +struct mpc52xx_psc { + u8 mode; /* PSC + 0x00 */ + u8 reserved0[3]; + union { /* PSC + 0x04 */ + u16 status; + u16 clock_select; + } sr_csr; +#define mpc52xx_psc_status sr_csr.status +#define mpc52xx_psc_clock_select sr_csr.clock_select + u16 reserved1; + u8 command; /* PSC + 0x08 */ + u8 reserved2[3]; + union { /* PSC + 0x0c */ + u8 buffer_8; + u16 buffer_16; + u32 buffer_32; + } buffer; +#define mpc52xx_psc_buffer_8 buffer.buffer_8 +#define mpc52xx_psc_buffer_16 buffer.buffer_16 +#define mpc52xx_psc_buffer_32 buffer.buffer_32 + union { /* PSC + 0x10 */ + u8 ipcr; + u8 acr; + } ipcr_acr; +#define mpc52xx_psc_ipcr ipcr_acr.ipcr +#define mpc52xx_psc_acr ipcr_acr.acr + u8 reserved3[3]; + union { /* PSC + 0x14 */ + u16 isr; + u16 imr; + } isr_imr; +#define mpc52xx_psc_isr isr_imr.isr +#define mpc52xx_psc_imr isr_imr.imr + u16 reserved4; + u8 ctur; /* PSC + 0x18 */ + u8 reserved5[3]; + u8 ctlr; /* PSC + 0x1c */ + u8 reserved6[3]; + /* BitClkDiv field of CCR is byte swapped in + * the hardware for mpc5200/b compatibility */ + u32 ccr; /* PSC + 0x20 */ + u32 ac97_slots; /* PSC + 0x24 */ + u32 ac97_cmd; /* PSC + 0x28 */ + u32 ac97_data; /* PSC + 0x2c */ + u8 ivr; /* PSC + 0x30 */ + u8 reserved8[3]; + u8 ip; /* PSC + 0x34 */ + u8 reserved9[3]; + u8 op1; /* PSC + 0x38 */ + u8 reserved10[3]; + u8 op0; /* PSC + 0x3c */ + u8 reserved11[3]; + u32 sicr; /* PSC + 0x40 */ + u8 ircr1; /* PSC + 0x44 */ + u8 reserved13[3]; + u8 ircr2; /* PSC + 0x44 */ + u8 reserved14[3]; + u8 irsdr; /* PSC + 0x4c */ + u8 reserved15[3]; + u8 irmdr; /* PSC + 0x50 */ + u8 reserved16[3]; + u8 irfdr; /* PSC + 0x54 */ + u8 reserved17[3]; +}; + +struct mpc52xx_psc_fifo { + u16 rfnum; /* PSC + 0x58 */ + u16 reserved18; + u16 tfnum; /* PSC + 0x5c */ + u16 reserved19; + u32 rfdata; /* PSC + 0x60 */ + u16 rfstat; /* PSC + 0x64 */ + u16 reserved20; + u8 rfcntl; /* PSC + 0x68 */ + u8 reserved21[5]; + u16 rfalarm; /* PSC + 0x6e */ + u16 reserved22; + u16 rfrptr; /* PSC + 0x72 */ + u16 reserved23; + u16 rfwptr; /* PSC + 0x76 */ + u16 reserved24; + u16 rflrfptr; /* PSC + 0x7a */ + u16 reserved25; + u16 rflwfptr; /* PSC + 0x7e */ + u32 tfdata; /* PSC + 0x80 */ + u16 tfstat; /* PSC + 0x84 */ + u16 reserved26; + u8 tfcntl; /* PSC + 0x88 */ + u8 reserved27[5]; + u16 tfalarm; /* PSC + 0x8e */ + u16 reserved28; + u16 tfrptr; /* PSC + 0x92 */ + u16 reserved29; + u16 tfwptr; /* PSC + 0x96 */ + u16 reserved30; + u16 tflrfptr; /* PSC + 0x9a */ + u16 reserved31; + u16 tflwfptr; /* PSC + 0x9e */ +}; + +#define MPC512x_PSC_FIFO_RESET_SLICE 0x80 +#define MPC512x_PSC_FIFO_ENABLE_SLICE 0x01 +#define MPC512x_PSC_FIFO_ENABLE_DMA 0x04 + +#define MPC512x_PSC_FIFO_EMPTY 0x1 +#define MPC512x_PSC_FIFO_FULL 0x2 +#define MPC512x_PSC_FIFO_ALARM 0x4 +#define MPC512x_PSC_FIFO_URERR 0x8 +#define MPC512x_PSC_FIFO_ORERR 0x01 +#define MPC512x_PSC_FIFO_MEMERROR 0x02 + +struct mpc512x_psc_fifo { + u32 reserved1[10]; + u32 txcmd; /* PSC + 0x80 */ + u32 txalarm; /* PSC + 0x84 */ + u32 txsr; /* PSC + 0x88 */ + u32 txisr; /* PSC + 0x8c */ + u32 tximr; /* PSC + 0x90 */ + u32 txcnt; /* PSC + 0x94 */ + u32 txptr; /* PSC + 0x98 */ + u32 txsz; /* PSC + 0x9c */ + u32 reserved2[7]; + union { + u8 txdata_8; + u16 txdata_16; + u32 txdata_32; + } txdata; /* PSC + 0xbc */ +#define txdata_8 txdata.txdata_8 +#define txdata_16 txdata.txdata_16 +#define txdata_32 txdata.txdata_32 + u32 rxcmd; /* PSC + 0xc0 */ + u32 rxalarm; /* PSC + 0xc4 */ + u32 rxsr; /* PSC + 0xc8 */ + u32 rxisr; /* PSC + 0xcc */ + u32 rximr; /* PSC + 0xd0 */ + u32 rxcnt; /* PSC + 0xd4 */ + u32 rxptr; /* PSC + 0xd8 */ + u32 rxsz; /* PSC + 0xdc */ + u32 reserved3[7]; + union { + u8 rxdata_8; + u16 rxdata_16; + u32 rxdata_32; + } rxdata; /* PSC + 0xfc */ +#define rxdata_8 rxdata.rxdata_8 +#define rxdata_16 rxdata.rxdata_16 +#define rxdata_32 rxdata.rxdata_32 +}; + +#endif /* __ASM_MPC52xx_PSC_H__ */ diff --git a/arch/powerpc/include/asm/mpc6xx.h b/arch/powerpc/include/asm/mpc6xx.h new file mode 100644 index 00000000000..effc2291beb --- /dev/null +++ b/arch/powerpc/include/asm/mpc6xx.h @@ -0,0 +1,6 @@ +#ifndef __ASM_POWERPC_MPC6xx_H +#define __ASM_POWERPC_MPC6xx_H + +void mpc6xx_enter_standby(void); + +#endif diff --git a/arch/powerpc/include/asm/mpc8260.h b/arch/powerpc/include/asm/mpc8260.h new file mode 100644 index 00000000000..03317e1e618 --- /dev/null +++ b/arch/powerpc/include/asm/mpc8260.h @@ -0,0 +1,25 @@ +/* + * Since there are many different boards and no standard configuration, + * we have a unique include file for each. Rather than change every + * file that has to include MPC8260 configuration, they all include + * this one and the configuration switching is done here. + */ +#ifdef __KERNEL__ +#ifndef __ASM_POWERPC_MPC8260_H__ +#define __ASM_POWERPC_MPC8260_H__ + +#define MPC82XX_BCR_PLDP 0x00800000 /* Pipeline Maximum Depth */ + +#ifdef CONFIG_8260 + +#if defined(CONFIG_PQ2ADS) || defined (CONFIG_PQ2FADS) +#include +#endif + +#ifdef CONFIG_PCI_8260 +#include +#endif + +#endif /* CONFIG_8260 */ +#endif /* !__ASM_POWERPC_MPC8260_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/mpc86xx.h b/arch/powerpc/include/asm/mpc86xx.h new file mode 100644 index 00000000000..15f650f987e --- /dev/null +++ b/arch/powerpc/include/asm/mpc86xx.h @@ -0,0 +1,33 @@ +/* + * MPC86xx definitions + * + * Author: Jeff Brown + * + * Copyright 2004 Freescale Semiconductor, Inc + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifdef __KERNEL__ +#ifndef __ASM_POWERPC_MPC86xx_H__ +#define __ASM_POWERPC_MPC86xx_H__ + +#include + +#ifdef CONFIG_PPC_86xx + +#define CPU0_BOOT_RELEASE 0x01000000 +#define CPU1_BOOT_RELEASE 0x02000000 +#define CPU_ALL_RELEASED (CPU0_BOOT_RELEASE | CPU1_BOOT_RELEASE) +#define MCM_PORT_CONFIG_OFFSET 0x1010 + +/* Offset from CCSRBAR */ +#define MPC86xx_MCM_OFFSET (0x00000) +#define MPC86xx_MCM_SIZE (0x02000) + +#endif /* CONFIG_PPC_86xx */ +#endif /* __ASM_POWERPC_MPC86xx_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/mpc8xx.h b/arch/powerpc/include/asm/mpc8xx.h new file mode 100644 index 00000000000..98f3c4f1732 --- /dev/null +++ b/arch/powerpc/include/asm/mpc8xx.h @@ -0,0 +1,12 @@ +/* This is the single file included by all MPC8xx build options. + * Since there are many different boards and no standard configuration, + * we have a unique include file for each. Rather than change every + * file that has to include MPC8xx configuration, they all include + * this one and the configuration switching is done here. + */ +#ifndef __CONFIG_8xx_DEFS +#define __CONFIG_8xx_DEFS + +extern struct mpc8xx_pcmcia_ops m8xx_pcmcia_ops; + +#endif /* __CONFIG_8xx_DEFS */ diff --git a/arch/powerpc/include/asm/mpic.h b/arch/powerpc/include/asm/mpic.h new file mode 100644 index 00000000000..fe566a348a8 --- /dev/null +++ b/arch/powerpc/include/asm/mpic.h @@ -0,0 +1,481 @@ +#ifndef _ASM_POWERPC_MPIC_H +#define _ASM_POWERPC_MPIC_H +#ifdef __KERNEL__ + +#include +#include +#include + +/* + * Global registers + */ + +#define MPIC_GREG_BASE 0x01000 + +#define MPIC_GREG_FEATURE_0 0x00000 +#define MPIC_GREG_FEATURE_LAST_SRC_MASK 0x07ff0000 +#define MPIC_GREG_FEATURE_LAST_SRC_SHIFT 16 +#define MPIC_GREG_FEATURE_LAST_CPU_MASK 0x00001f00 +#define MPIC_GREG_FEATURE_LAST_CPU_SHIFT 8 +#define MPIC_GREG_FEATURE_VERSION_MASK 0xff +#define MPIC_GREG_FEATURE_1 0x00010 +#define MPIC_GREG_GLOBAL_CONF_0 0x00020 +#define MPIC_GREG_GCONF_RESET 0x80000000 +#define MPIC_GREG_GCONF_8259_PTHROU_DIS 0x20000000 +#define MPIC_GREG_GCONF_NO_BIAS 0x10000000 +#define MPIC_GREG_GCONF_BASE_MASK 0x000fffff +#define MPIC_GREG_GCONF_MCK 0x08000000 +#define MPIC_GREG_GLOBAL_CONF_1 0x00030 +#define MPIC_GREG_GLOBAL_CONF_1_SIE 0x08000000 +#define MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO_MASK 0x70000000 +#define MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO(r) \ + (((r) << 28) & MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO_MASK) +#define MPIC_GREG_VENDOR_0 0x00040 +#define MPIC_GREG_VENDOR_1 0x00050 +#define MPIC_GREG_VENDOR_2 0x00060 +#define MPIC_GREG_VENDOR_3 0x00070 +#define MPIC_GREG_VENDOR_ID 0x00080 +#define MPIC_GREG_VENDOR_ID_STEPPING_MASK 0x00ff0000 +#define MPIC_GREG_VENDOR_ID_STEPPING_SHIFT 16 +#define MPIC_GREG_VENDOR_ID_DEVICE_ID_MASK 0x0000ff00 +#define MPIC_GREG_VENDOR_ID_DEVICE_ID_SHIFT 8 +#define MPIC_GREG_VENDOR_ID_VENDOR_ID_MASK 0x000000ff +#define MPIC_GREG_PROCESSOR_INIT 0x00090 +#define MPIC_GREG_IPI_VECTOR_PRI_0 0x000a0 +#define MPIC_GREG_IPI_VECTOR_PRI_1 0x000b0 +#define MPIC_GREG_IPI_VECTOR_PRI_2 0x000c0 +#define MPIC_GREG_IPI_VECTOR_PRI_3 0x000d0 +#define MPIC_GREG_IPI_STRIDE 0x10 +#define MPIC_GREG_SPURIOUS 0x000e0 +#define MPIC_GREG_TIMER_FREQ 0x000f0 + +/* + * + * Timer registers + */ +#define MPIC_TIMER_BASE 0x01100 +#define MPIC_TIMER_STRIDE 0x40 + +#define MPIC_TIMER_CURRENT_CNT 0x00000 +#define MPIC_TIMER_BASE_CNT 0x00010 +#define MPIC_TIMER_VECTOR_PRI 0x00020 +#define MPIC_TIMER_DESTINATION 0x00030 + +/* + * Per-Processor registers + */ + +#define MPIC_CPU_THISBASE 0x00000 +#define MPIC_CPU_BASE 0x20000 +#define MPIC_CPU_STRIDE 0x01000 + +#define MPIC_CPU_IPI_DISPATCH_0 0x00040 +#define MPIC_CPU_IPI_DISPATCH_1 0x00050 +#define MPIC_CPU_IPI_DISPATCH_2 0x00060 +#define MPIC_CPU_IPI_DISPATCH_3 0x00070 +#define MPIC_CPU_IPI_DISPATCH_STRIDE 0x00010 +#define MPIC_CPU_CURRENT_TASK_PRI 0x00080 +#define MPIC_CPU_TASKPRI_MASK 0x0000000f +#define MPIC_CPU_WHOAMI 0x00090 +#define MPIC_CPU_WHOAMI_MASK 0x0000001f +#define MPIC_CPU_INTACK 0x000a0 +#define MPIC_CPU_EOI 0x000b0 +#define MPIC_CPU_MCACK 0x000c0 + +/* + * Per-source registers + */ + +#define MPIC_IRQ_BASE 0x10000 +#define MPIC_IRQ_STRIDE 0x00020 +#define MPIC_IRQ_VECTOR_PRI 0x00000 +#define MPIC_VECPRI_MASK 0x80000000 +#define MPIC_VECPRI_ACTIVITY 0x40000000 /* Read Only */ +#define MPIC_VECPRI_PRIORITY_MASK 0x000f0000 +#define MPIC_VECPRI_PRIORITY_SHIFT 16 +#define MPIC_VECPRI_VECTOR_MASK 0x000007ff +#define MPIC_VECPRI_POLARITY_POSITIVE 0x00800000 +#define MPIC_VECPRI_POLARITY_NEGATIVE 0x00000000 +#define MPIC_VECPRI_POLARITY_MASK 0x00800000 +#define MPIC_VECPRI_SENSE_LEVEL 0x00400000 +#define MPIC_VECPRI_SENSE_EDGE 0x00000000 +#define MPIC_VECPRI_SENSE_MASK 0x00400000 +#define MPIC_IRQ_DESTINATION 0x00010 + +#define MPIC_MAX_IRQ_SOURCES 2048 +#define MPIC_MAX_CPUS 32 +#define MPIC_MAX_ISU 32 + +/* + * Tsi108 implementation of MPIC has many differences from the original one + */ + +/* + * Global registers + */ + +#define TSI108_GREG_BASE 0x00000 +#define TSI108_GREG_FEATURE_0 0x00000 +#define TSI108_GREG_GLOBAL_CONF_0 0x00004 +#define TSI108_GREG_VENDOR_ID 0x0000c +#define TSI108_GREG_IPI_VECTOR_PRI_0 0x00204 /* Doorbell 0 */ +#define TSI108_GREG_IPI_STRIDE 0x0c +#define TSI108_GREG_SPURIOUS 0x00010 +#define TSI108_GREG_TIMER_FREQ 0x00014 + +/* + * Timer registers + */ +#define TSI108_TIMER_BASE 0x0030 +#define TSI108_TIMER_STRIDE 0x10 +#define TSI108_TIMER_CURRENT_CNT 0x00000 +#define TSI108_TIMER_BASE_CNT 0x00004 +#define TSI108_TIMER_VECTOR_PRI 0x00008 +#define TSI108_TIMER_DESTINATION 0x0000c + +/* + * Per-Processor registers + */ +#define TSI108_CPU_BASE 0x00300 +#define TSI108_CPU_STRIDE 0x00040 +#define TSI108_CPU_IPI_DISPATCH_0 0x00200 +#define TSI108_CPU_IPI_DISPATCH_STRIDE 0x00000 +#define TSI108_CPU_CURRENT_TASK_PRI 0x00000 +#define TSI108_CPU_WHOAMI 0xffffffff +#define TSI108_CPU_INTACK 0x00004 +#define TSI108_CPU_EOI 0x00008 +#define TSI108_CPU_MCACK 0x00004 /* Doesn't really exist here */ + +/* + * Per-source registers + */ +#define TSI108_IRQ_BASE 0x00100 +#define TSI108_IRQ_STRIDE 0x00008 +#define TSI108_IRQ_VECTOR_PRI 0x00000 +#define TSI108_VECPRI_VECTOR_MASK 0x000000ff +#define TSI108_VECPRI_POLARITY_POSITIVE 0x01000000 +#define TSI108_VECPRI_POLARITY_NEGATIVE 0x00000000 +#define TSI108_VECPRI_SENSE_LEVEL 0x02000000 +#define TSI108_VECPRI_SENSE_EDGE 0x00000000 +#define TSI108_VECPRI_POLARITY_MASK 0x01000000 +#define TSI108_VECPRI_SENSE_MASK 0x02000000 +#define TSI108_IRQ_DESTINATION 0x00004 + +/* weird mpic register indices and mask bits in the HW info array */ +enum { + MPIC_IDX_GREG_BASE = 0, + MPIC_IDX_GREG_FEATURE_0, + MPIC_IDX_GREG_GLOBAL_CONF_0, + MPIC_IDX_GREG_VENDOR_ID, + MPIC_IDX_GREG_IPI_VECTOR_PRI_0, + MPIC_IDX_GREG_IPI_STRIDE, + MPIC_IDX_GREG_SPURIOUS, + MPIC_IDX_GREG_TIMER_FREQ, + + MPIC_IDX_TIMER_BASE, + MPIC_IDX_TIMER_STRIDE, + MPIC_IDX_TIMER_CURRENT_CNT, + MPIC_IDX_TIMER_BASE_CNT, + MPIC_IDX_TIMER_VECTOR_PRI, + MPIC_IDX_TIMER_DESTINATION, + + MPIC_IDX_CPU_BASE, + MPIC_IDX_CPU_STRIDE, + MPIC_IDX_CPU_IPI_DISPATCH_0, + MPIC_IDX_CPU_IPI_DISPATCH_STRIDE, + MPIC_IDX_CPU_CURRENT_TASK_PRI, + MPIC_IDX_CPU_WHOAMI, + MPIC_IDX_CPU_INTACK, + MPIC_IDX_CPU_EOI, + MPIC_IDX_CPU_MCACK, + + MPIC_IDX_IRQ_BASE, + MPIC_IDX_IRQ_STRIDE, + MPIC_IDX_IRQ_VECTOR_PRI, + + MPIC_IDX_VECPRI_VECTOR_MASK, + MPIC_IDX_VECPRI_POLARITY_POSITIVE, + MPIC_IDX_VECPRI_POLARITY_NEGATIVE, + MPIC_IDX_VECPRI_SENSE_LEVEL, + MPIC_IDX_VECPRI_SENSE_EDGE, + MPIC_IDX_VECPRI_POLARITY_MASK, + MPIC_IDX_VECPRI_SENSE_MASK, + MPIC_IDX_IRQ_DESTINATION, + MPIC_IDX_END +}; + + +#ifdef CONFIG_MPIC_U3_HT_IRQS +/* Fixup table entry */ +struct mpic_irq_fixup +{ + u8 __iomem *base; + u8 __iomem *applebase; + u32 data; + unsigned int index; +}; +#endif /* CONFIG_MPIC_U3_HT_IRQS */ + + +enum mpic_reg_type { + mpic_access_mmio_le, + mpic_access_mmio_be, +#ifdef CONFIG_PPC_DCR + mpic_access_dcr +#endif +}; + +struct mpic_reg_bank { + u32 __iomem *base; +#ifdef CONFIG_PPC_DCR + dcr_host_t dhost; +#endif /* CONFIG_PPC_DCR */ +}; + +struct mpic_irq_save { + u32 vecprio, + dest; +#ifdef CONFIG_MPIC_U3_HT_IRQS + u32 fixup_data; +#endif +}; + +/* The instance data of a given MPIC */ +struct mpic +{ + /* The remapper for this MPIC */ + struct irq_host *irqhost; + + /* The "linux" controller struct */ + struct irq_chip hc_irq; +#ifdef CONFIG_MPIC_U3_HT_IRQS + struct irq_chip hc_ht_irq; +#endif +#ifdef CONFIG_SMP + struct irq_chip hc_ipi; +#endif + const char *name; + /* Flags */ + unsigned int flags; + /* How many irq sources in a given ISU */ + unsigned int isu_size; + unsigned int isu_shift; + unsigned int isu_mask; + unsigned int irq_count; + /* Number of sources */ + unsigned int num_sources; + /* Number of CPUs */ + unsigned int num_cpus; + /* default senses array */ + unsigned char *senses; + unsigned int senses_count; + + /* vector numbers used for internal sources (ipi/timers) */ + unsigned int ipi_vecs[4]; + unsigned int timer_vecs[4]; + + /* Spurious vector to program into unused sources */ + unsigned int spurious_vec; + +#ifdef CONFIG_MPIC_U3_HT_IRQS + /* The fixup table */ + struct mpic_irq_fixup *fixups; + spinlock_t fixup_lock; +#endif + + /* Register access method */ + enum mpic_reg_type reg_type; + + /* The various ioremap'ed bases */ + struct mpic_reg_bank gregs; + struct mpic_reg_bank tmregs; + struct mpic_reg_bank cpuregs[MPIC_MAX_CPUS]; + struct mpic_reg_bank isus[MPIC_MAX_ISU]; + + /* Protected sources */ + unsigned long *protected; + +#ifdef CONFIG_MPIC_WEIRD + /* Pointer to HW info array */ + u32 *hw_set; +#endif + +#ifdef CONFIG_PCI_MSI + spinlock_t bitmap_lock; + unsigned long *hwirq_bitmap; +#endif + +#ifdef CONFIG_MPIC_BROKEN_REGREAD + u32 isu_reg0_shadow[MPIC_MAX_IRQ_SOURCES]; +#endif + + /* link */ + struct mpic *next; + + struct sys_device sysdev; + +#ifdef CONFIG_PM + struct mpic_irq_save *save_data; +#endif +}; + +/* + * MPIC flags (passed to mpic_alloc) + * + * The top 4 bits contain an MPIC bhw id that is used to index the + * register offsets and some masks when CONFIG_MPIC_WEIRD is set. + * Note setting any ID (leaving those bits to 0) means standard MPIC + */ + +/* This is the primary controller, only that one has IPIs and + * has afinity control. A non-primary MPIC always uses CPU0 + * registers only + */ +#define MPIC_PRIMARY 0x00000001 + +/* Set this for a big-endian MPIC */ +#define MPIC_BIG_ENDIAN 0x00000002 +/* Broken U3 MPIC */ +#define MPIC_U3_HT_IRQS 0x00000004 +/* Broken IPI registers (autodetected) */ +#define MPIC_BROKEN_IPI 0x00000008 +/* MPIC wants a reset */ +#define MPIC_WANTS_RESET 0x00000010 +/* Spurious vector requires EOI */ +#define MPIC_SPV_EOI 0x00000020 +/* No passthrough disable */ +#define MPIC_NO_PTHROU_DIS 0x00000040 +/* DCR based MPIC */ +#define MPIC_USES_DCR 0x00000080 +/* MPIC has 11-bit vector fields (or larger) */ +#define MPIC_LARGE_VECTORS 0x00000100 +/* Enable delivery of prio 15 interrupts as MCK instead of EE */ +#define MPIC_ENABLE_MCK 0x00000200 +/* Disable bias among target selection, spread interrupts evenly */ +#define MPIC_NO_BIAS 0x00000400 +/* Ignore NIRQS as reported by FRR */ +#define MPIC_BROKEN_FRR_NIRQS 0x00000800 + +/* MPIC HW modification ID */ +#define MPIC_REGSET_MASK 0xf0000000 +#define MPIC_REGSET(val) (((val) & 0xf ) << 28) +#define MPIC_GET_REGSET(flags) (((flags) >> 28) & 0xf) + +#define MPIC_REGSET_STANDARD MPIC_REGSET(0) /* Original MPIC */ +#define MPIC_REGSET_TSI108 MPIC_REGSET(1) /* Tsi108/109 PIC */ + +/* Allocate the controller structure and setup the linux irq descs + * for the range if interrupts passed in. No HW initialization is + * actually performed. + * + * @phys_addr: physial base address of the MPIC + * @flags: flags, see constants above + * @isu_size: number of interrupts in an ISU. Use 0 to use a + * standard ISU-less setup (aka powermac) + * @irq_offset: first irq number to assign to this mpic + * @irq_count: number of irqs to use with this mpic IRQ sources. Pass 0 + * to match the number of sources + * @ipi_offset: first irq number to assign to this mpic IPI sources, + * used only on primary mpic + * @senses: array of sense values + * @senses_num: number of entries in the array + * + * Note about the sense array. If none is passed, all interrupts are + * setup to be level negative unless MPIC_U3_HT_IRQS is set in which + * case they are edge positive (and the array is ignored anyway). + * The values in the array start at the first source of the MPIC, + * that is senses[0] correspond to linux irq "irq_offset". + */ +extern struct mpic *mpic_alloc(struct device_node *node, + phys_addr_t phys_addr, + unsigned int flags, + unsigned int isu_size, + unsigned int irq_count, + const char *name); + +/* Assign ISUs, to call before mpic_init() + * + * @mpic: controller structure as returned by mpic_alloc() + * @isu_num: ISU number + * @phys_addr: physical address of the ISU + */ +extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num, + phys_addr_t phys_addr); + +/* Set default sense codes + * + * @mpic: controller + * @senses: array of sense codes + * @count: size of above array + * + * Optionally provide an array (indexed on hardware interrupt numbers + * for this MPIC) of default sense codes for the chip. Those are linux + * sense codes IRQ_TYPE_* + * + * The driver gets ownership of the pointer, don't dispose of it or + * anything like that. __init only. + */ +extern void mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count); + + +/* Initialize the controller. After this has been called, none of the above + * should be called again for this mpic + */ +extern void mpic_init(struct mpic *mpic); + +/* + * All of the following functions must only be used after the + * ISUs have been assigned and the controller fully initialized + * with mpic_init() + */ + + +/* Change the priority of an interrupt. Default is 8 for irqs and + * 10 for IPIs. You can call this on both IPIs and IRQ numbers, but the + * IPI number is then the offset'ed (linux irq number mapped to the IPI) + */ +extern void mpic_irq_set_priority(unsigned int irq, unsigned int pri); + +/* Setup a non-boot CPU */ +extern void mpic_setup_this_cpu(void); + +/* Clean up for kexec (or cpu offline or ...) */ +extern void mpic_teardown_this_cpu(int secondary); + +/* Get the current cpu priority for this cpu (0..15) */ +extern int mpic_cpu_get_priority(void); + +/* Set the current cpu priority for this cpu */ +extern void mpic_cpu_set_priority(int prio); + +/* Request IPIs on primary mpic */ +extern void mpic_request_ipis(void); + +/* Send an IPI (non offseted number 0..3) */ +extern void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask); + +/* Send a message (IPI) to a given target (cpu number or MSG_*) */ +void smp_mpic_message_pass(int target, int msg); + +/* Unmask a specific virq */ +extern void mpic_unmask_irq(unsigned int irq); +/* Mask a specific virq */ +extern void mpic_mask_irq(unsigned int irq); +/* EOI a specific virq */ +extern void mpic_end_irq(unsigned int irq); + +/* Fetch interrupt from a given mpic */ +extern unsigned int mpic_get_one_irq(struct mpic *mpic); +/* This one gets from the primary mpic */ +extern unsigned int mpic_get_irq(void); +/* Fetch Machine Check interrupt from primary mpic */ +extern unsigned int mpic_get_mcirq(void); + +/* Set the EPIC clock ratio */ +void mpic_set_clk_ratio(struct mpic *mpic, u32 clock_ratio); + +/* Enable/Disable EPIC serial interrupt mode */ +void mpic_set_serial_int(struct mpic *mpic, int enable); + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_MPIC_H */ diff --git a/arch/powerpc/include/asm/msgbuf.h b/arch/powerpc/include/asm/msgbuf.h new file mode 100644 index 00000000000..dd76743c753 --- /dev/null +++ b/arch/powerpc/include/asm/msgbuf.h @@ -0,0 +1,33 @@ +#ifndef _ASM_POWERPC_MSGBUF_H +#define _ASM_POWERPC_MSGBUF_H + +/* + * The msqid64_ds structure for the PowerPC architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + */ + +struct msqid64_ds { + struct ipc64_perm msg_perm; +#ifndef __powerpc64__ + unsigned int __unused1; +#endif + __kernel_time_t msg_stime; /* last msgsnd time */ +#ifndef __powerpc64__ + unsigned int __unused2; +#endif + __kernel_time_t msg_rtime; /* last msgrcv time */ +#ifndef __powerpc64__ + unsigned int __unused3; +#endif + __kernel_time_t msg_ctime; /* last change time */ + unsigned long msg_cbytes; /* current number of bytes on queue */ + unsigned long msg_qnum; /* number of messages in queue */ + unsigned long msg_qbytes; /* max number of bytes on queue */ + __kernel_pid_t msg_lspid; /* pid of last msgsnd */ + __kernel_pid_t msg_lrpid; /* last receive pid */ + unsigned long __unused4; + unsigned long __unused5; +}; + +#endif /* _ASM_POWERPC_MSGBUF_H */ diff --git a/arch/powerpc/include/asm/mutex.h b/arch/powerpc/include/asm/mutex.h new file mode 100644 index 00000000000..458c1f7fbc1 --- /dev/null +++ b/arch/powerpc/include/asm/mutex.h @@ -0,0 +1,9 @@ +/* + * Pull in the generic implementation for the mutex fastpath. + * + * TODO: implement optimized primitives instead, or leave the generic + * implementation in place, or pick the atomic_xchg() based generic + * implementation. (see asm-generic/mutex-xchg.h for details) + */ + +#include diff --git a/arch/powerpc/include/asm/nvram.h b/arch/powerpc/include/asm/nvram.h new file mode 100644 index 00000000000..efde5ac82f7 --- /dev/null +++ b/arch/powerpc/include/asm/nvram.h @@ -0,0 +1,139 @@ +/* + * NVRAM definitions and access functions. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_POWERPC_NVRAM_H +#define _ASM_POWERPC_NVRAM_H + +#include + +#define NVRW_CNT 0x20 +#define NVRAM_HEADER_LEN 16 /* sizeof(struct nvram_header) */ +#define NVRAM_BLOCK_LEN 16 +#define NVRAM_MAX_REQ (2080/NVRAM_BLOCK_LEN) +#define NVRAM_MIN_REQ (1056/NVRAM_BLOCK_LEN) + +#define NVRAM_AS0 0x74 +#define NVRAM_AS1 0x75 +#define NVRAM_DATA 0x77 + + +/* RTC Offsets */ + +#define MOTO_RTC_SECONDS 0x1FF9 +#define MOTO_RTC_MINUTES 0x1FFA +#define MOTO_RTC_HOURS 0x1FFB +#define MOTO_RTC_DAY_OF_WEEK 0x1FFC +#define MOTO_RTC_DAY_OF_MONTH 0x1FFD +#define MOTO_RTC_MONTH 0x1FFE +#define MOTO_RTC_YEAR 0x1FFF +#define MOTO_RTC_CONTROLA 0x1FF8 +#define MOTO_RTC_CONTROLB 0x1FF9 + +#define NVRAM_SIG_SP 0x02 /* support processor */ +#define NVRAM_SIG_OF 0x50 /* open firmware config */ +#define NVRAM_SIG_FW 0x51 /* general firmware */ +#define NVRAM_SIG_HW 0x52 /* hardware (VPD) */ +#define NVRAM_SIG_FLIP 0x5a /* Apple flip/flop header */ +#define NVRAM_SIG_APPL 0x5f /* Apple "system" (???) */ +#define NVRAM_SIG_SYS 0x70 /* system env vars */ +#define NVRAM_SIG_CFG 0x71 /* config data */ +#define NVRAM_SIG_ELOG 0x72 /* error log */ +#define NVRAM_SIG_VEND 0x7e /* vendor defined */ +#define NVRAM_SIG_FREE 0x7f /* Free space */ +#define NVRAM_SIG_OS 0xa0 /* OS defined */ +#define NVRAM_SIG_PANIC 0xa1 /* Apple OSX "panic" */ + +/* If change this size, then change the size of NVNAME_LEN */ +struct nvram_header { + unsigned char signature; + unsigned char checksum; + unsigned short length; + char name[12]; +}; + +#ifdef __KERNEL__ + +#include + +struct nvram_partition { + struct list_head partition; + struct nvram_header header; + unsigned int index; +}; + + +extern int nvram_write_error_log(char * buff, int length, + unsigned int err_type, unsigned int err_seq); +extern int nvram_read_error_log(char * buff, int length, + unsigned int * err_type, unsigned int *err_seq); +extern int nvram_clear_error_log(void); +extern struct nvram_partition *nvram_find_partition(int sig, const char *name); + +extern int pSeries_nvram_init(void); + +#ifdef CONFIG_MMIO_NVRAM +extern int mmio_nvram_init(void); +#else +static inline int mmio_nvram_init(void) +{ + return -ENODEV; +} +#endif + +#endif /* __KERNEL__ */ + +/* PowerMac specific nvram stuffs */ + +enum { + pmac_nvram_OF, /* Open Firmware partition */ + pmac_nvram_XPRAM, /* MacOS XPRAM partition */ + pmac_nvram_NR /* MacOS Name Registry partition */ +}; + +#ifdef __KERNEL__ +/* Return partition offset in nvram */ +extern int pmac_get_partition(int partition); + +/* Direct access to XPRAM on PowerMacs */ +extern u8 pmac_xpram_read(int xpaddr); +extern void pmac_xpram_write(int xpaddr, u8 data); + +/* Synchronize NVRAM */ +extern void nvram_sync(void); + +/* Normal access to NVRAM */ +extern unsigned char nvram_read_byte(int i); +extern void nvram_write_byte(unsigned char c, int i); +#endif + +/* Some offsets in XPRAM */ +#define PMAC_XPRAM_MACHINE_LOC 0xe4 +#define PMAC_XPRAM_SOUND_VOLUME 0x08 + +/* Machine location structure in PowerMac XPRAM */ +struct pmac_machine_location { + unsigned int latitude; /* 2+30 bit Fractional number */ + unsigned int longitude; /* 2+30 bit Fractional number */ + unsigned int delta; /* mix of GMT delta and DLS */ +}; + +/* + * /dev/nvram ioctls + * + * Note that PMAC_NVRAM_GET_OFFSET is still supported, but is + * definitely obsolete. Do not use it if you can avoid it + */ + +#define OBSOLETE_PMAC_NVRAM_GET_OFFSET \ + _IOWR('p', 0x40, int) + +#define IOC_NVRAM_GET_OFFSET _IOWR('p', 0x42, int) /* Get NVRAM partition offset */ +#define IOC_NVRAM_SYNC _IO('p', 0x43) /* Sync NVRAM image */ + +#endif /* _ASM_POWERPC_NVRAM_H */ diff --git a/arch/powerpc/include/asm/of_device.h b/arch/powerpc/include/asm/of_device.h new file mode 100644 index 00000000000..3c123990ca2 --- /dev/null +++ b/arch/powerpc/include/asm/of_device.h @@ -0,0 +1,31 @@ +#ifndef _ASM_POWERPC_OF_DEVICE_H +#define _ASM_POWERPC_OF_DEVICE_H +#ifdef __KERNEL__ + +#include +#include + +/* + * The of_device is a kind of "base class" that is a superset of + * struct device for use by devices attached to an OF node and + * probed using OF properties. + */ +struct of_device +{ + struct device_node *node; /* to be obsoleted */ + u64 dma_mask; /* DMA mask */ + struct device dev; /* Generic device interface */ +}; + +extern struct of_device *of_device_alloc(struct device_node *np, + const char *bus_id, + struct device *parent); + +extern int of_device_uevent(struct device *dev, + struct kobj_uevent_env *env); + +/* This is just here during the transition */ +#include + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_OF_DEVICE_H */ diff --git a/arch/powerpc/include/asm/of_platform.h b/arch/powerpc/include/asm/of_platform.h new file mode 100644 index 00000000000..18659ef7213 --- /dev/null +++ b/arch/powerpc/include/asm/of_platform.h @@ -0,0 +1,42 @@ +#ifndef _ASM_POWERPC_OF_PLATFORM_H +#define _ASM_POWERPC_OF_PLATFORM_H +/* + * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +/* This is just here during the transition */ +#include + +/* Platform drivers register/unregister */ +static inline int of_register_platform_driver(struct of_platform_driver *drv) +{ + return of_register_driver(drv, &of_platform_bus_type); +} +static inline void of_unregister_platform_driver(struct of_platform_driver *drv) +{ + of_unregister_driver(drv); +} + +/* Platform devices and busses creation */ +extern struct of_device *of_platform_device_create(struct device_node *np, + const char *bus_id, + struct device *parent); +/* pseudo "matches" value to not do deep probe */ +#define OF_NO_DEEP_PROBE ((struct of_device_id *)-1) + +extern int of_platform_bus_probe(struct device_node *root, + const struct of_device_id *matches, + struct device *parent); + +extern struct of_device *of_find_device_by_phandle(phandle ph); + +extern void of_instantiate_rtc(void); + +#endif /* _ASM_POWERPC_OF_PLATFORM_H */ diff --git a/arch/powerpc/include/asm/ohare.h b/arch/powerpc/include/asm/ohare.h new file mode 100644 index 00000000000..0d030f9dea2 --- /dev/null +++ b/arch/powerpc/include/asm/ohare.h @@ -0,0 +1,54 @@ +#ifndef _ASM_POWERPC_OHARE_H +#define _ASM_POWERPC_OHARE_H +#ifdef __KERNEL__ +/* + * ohare.h: definitions for using the "O'Hare" I/O controller chip. + * + * Copyright (C) 1997 Paul Mackerras. + * + * BenH: Changed to match those of heathrow (but not all of them). Please + * check if I didn't break anything (especially the media bay). + */ + +/* offset from ohare base for feature control register */ +#define OHARE_MBCR 0x34 +#define OHARE_FCR 0x38 + +/* + * Bits in feature control register. + * These were mostly derived by experiment on a powerbook 3400 + * and may differ for other machines. + */ +#define OH_SCC_RESET 1 +#define OH_BAY_POWER_N 2 /* a guess */ +#define OH_BAY_PCI_ENABLE 4 /* a guess */ +#define OH_BAY_IDE_ENABLE 8 +#define OH_BAY_FLOPPY_ENABLE 0x10 +#define OH_IDE0_ENABLE 0x20 +#define OH_IDE0_RESET_N 0x40 /* a guess */ +#define OH_BAY_DEV_MASK 0x1c +#define OH_BAY_RESET_N 0x80 +#define OH_IOBUS_ENABLE 0x100 /* IOBUS seems to be IDE */ +#define OH_SCC_ENABLE 0x200 +#define OH_MESH_ENABLE 0x400 +#define OH_FLOPPY_ENABLE 0x800 +#define OH_SCCA_IO 0x4000 +#define OH_SCCB_IO 0x8000 +#define OH_VIA_ENABLE 0x10000 /* Is apparently wrong, to be verified */ +#define OH_IDE1_RESET_N 0x800000 + +/* + * Bits to set in the feature control register on PowerBooks. + */ +#define PBOOK_FEATURES (OH_IDE_ENABLE | OH_SCC_ENABLE | \ + OH_MESH_ENABLE | OH_SCCA_IO | OH_SCCB_IO) + +/* + * A magic value to put into the feature control register of the + * "ohare" I/O controller on Starmaxes to enable the IDE CD interface. + * Contributed by Harry Eaton. + */ +#define STARMAX_FEATURES 0xbeff7a + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_OHARE_H */ diff --git a/arch/powerpc/include/asm/oprofile_impl.h b/arch/powerpc/include/asm/oprofile_impl.h new file mode 100644 index 00000000000..95035c602ba --- /dev/null +++ b/arch/powerpc/include/asm/oprofile_impl.h @@ -0,0 +1,134 @@ +/* + * Copyright (C) 2004 Anton Blanchard , IBM + * + * Based on alpha version. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_POWERPC_OPROFILE_IMPL_H +#define _ASM_POWERPC_OPROFILE_IMPL_H +#ifdef __KERNEL__ + +#define OP_MAX_COUNTER 8 + +/* Per-counter configuration as set via oprofilefs. */ +struct op_counter_config { + unsigned long enabled; + unsigned long event; + unsigned long count; + /* Classic doesn't support per-counter user/kernel selection */ + unsigned long kernel; + unsigned long user; + unsigned long unit_mask; +}; + +/* System-wide configuration as set via oprofilefs. */ +struct op_system_config { +#ifdef CONFIG_PPC64 + unsigned long mmcr0; + unsigned long mmcr1; + unsigned long mmcra; +#endif + unsigned long enable_kernel; + unsigned long enable_user; +}; + +/* Per-arch configuration */ +struct op_powerpc_model { + int (*reg_setup) (struct op_counter_config *, + struct op_system_config *, + int num_counters); + int (*cpu_setup) (struct op_counter_config *); + int (*start) (struct op_counter_config *); + int (*global_start) (struct op_counter_config *); + void (*stop) (void); + void (*global_stop) (void); + int (*sync_start)(void); + int (*sync_stop)(void); + void (*handle_interrupt) (struct pt_regs *, + struct op_counter_config *); + int num_counters; +}; + +extern struct op_powerpc_model op_model_fsl_emb; +extern struct op_powerpc_model op_model_rs64; +extern struct op_powerpc_model op_model_power4; +extern struct op_powerpc_model op_model_7450; +extern struct op_powerpc_model op_model_cell; +extern struct op_powerpc_model op_model_pa6t; + + +/* All the classic PPC parts use these */ +static inline unsigned int classic_ctr_read(unsigned int i) +{ + switch(i) { + case 0: + return mfspr(SPRN_PMC1); + case 1: + return mfspr(SPRN_PMC2); + case 2: + return mfspr(SPRN_PMC3); + case 3: + return mfspr(SPRN_PMC4); + case 4: + return mfspr(SPRN_PMC5); + case 5: + return mfspr(SPRN_PMC6); + +/* No PPC32 chip has more than 6 so far */ +#ifdef CONFIG_PPC64 + case 6: + return mfspr(SPRN_PMC7); + case 7: + return mfspr(SPRN_PMC8); +#endif + default: + return 0; + } +} + +static inline void classic_ctr_write(unsigned int i, unsigned int val) +{ + switch(i) { + case 0: + mtspr(SPRN_PMC1, val); + break; + case 1: + mtspr(SPRN_PMC2, val); + break; + case 2: + mtspr(SPRN_PMC3, val); + break; + case 3: + mtspr(SPRN_PMC4, val); + break; + case 4: + mtspr(SPRN_PMC5, val); + break; + case 5: + mtspr(SPRN_PMC6, val); + break; + +/* No PPC32 chip has more than 6, yet */ +#ifdef CONFIG_PPC64 + case 6: + mtspr(SPRN_PMC7, val); + break; + case 7: + mtspr(SPRN_PMC8, val); + break; +#endif + default: + break; + } +} + + +extern void op_powerpc_backtrace(struct pt_regs * const regs, unsigned int depth); + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_OPROFILE_IMPL_H */ diff --git a/arch/powerpc/include/asm/pSeries_reconfig.h b/arch/powerpc/include/asm/pSeries_reconfig.h new file mode 100644 index 00000000000..e482e5352e6 --- /dev/null +++ b/arch/powerpc/include/asm/pSeries_reconfig.h @@ -0,0 +1,29 @@ +#ifndef _PPC64_PSERIES_RECONFIG_H +#define _PPC64_PSERIES_RECONFIG_H +#ifdef __KERNEL__ + +#include + +/* + * Use this API if your code needs to know about OF device nodes being + * added or removed on pSeries systems. + */ + +#define PSERIES_RECONFIG_ADD 0x0001 +#define PSERIES_RECONFIG_REMOVE 0x0002 +#define PSERIES_DRCONF_MEM_ADD 0x0003 +#define PSERIES_DRCONF_MEM_REMOVE 0x0004 + +#ifdef CONFIG_PPC_PSERIES +extern int pSeries_reconfig_notifier_register(struct notifier_block *); +extern void pSeries_reconfig_notifier_unregister(struct notifier_block *); +#else /* !CONFIG_PPC_PSERIES */ +static inline int pSeries_reconfig_notifier_register(struct notifier_block *nb) +{ + return 0; +} +static inline void pSeries_reconfig_notifier_unregister(struct notifier_block *nb) { } +#endif /* CONFIG_PPC_PSERIES */ + +#endif /* __KERNEL__ */ +#endif /* _PPC64_PSERIES_RECONFIG_H */ diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h new file mode 100644 index 00000000000..6493a395508 --- /dev/null +++ b/arch/powerpc/include/asm/paca.h @@ -0,0 +1,112 @@ +/* + * This control block defines the PACA which defines the processor + * specific data for each logical processor on the system. + * There are some pointers defined that are utilized by PLIC. + * + * C 2001 PPC 64 Team, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_POWERPC_PACA_H +#define _ASM_POWERPC_PACA_H +#ifdef __KERNEL__ + +#include +#include +#include + +register struct paca_struct *local_paca asm("r13"); + +#if defined(CONFIG_DEBUG_PREEMPT) && defined(CONFIG_SMP) +extern unsigned int debug_smp_processor_id(void); /* from linux/smp.h */ +/* + * Add standard checks that preemption cannot occur when using get_paca(): + * otherwise the paca_struct it points to may be the wrong one just after. + */ +#define get_paca() ((void) debug_smp_processor_id(), local_paca) +#else +#define get_paca() local_paca +#endif + +#define get_lppaca() (get_paca()->lppaca_ptr) +#define get_slb_shadow() (get_paca()->slb_shadow_ptr) + +struct task_struct; + +/* + * Defines the layout of the paca. + * + * This structure is not directly accessed by firmware or the service + * processor. + */ +struct paca_struct { + /* + * Because hw_cpu_id, unlike other paca fields, is accessed + * routinely from other CPUs (from the IRQ code), we stick to + * read-only (after boot) fields in the first cacheline to + * avoid cacheline bouncing. + */ + + struct lppaca *lppaca_ptr; /* Pointer to LpPaca for PLIC */ + + /* + * MAGIC: the spinlock functions in arch/powerpc/lib/locks.c + * load lock_token and paca_index with a single lwz + * instruction. They must travel together and be properly + * aligned. + */ + u16 lock_token; /* Constant 0x8000, used in locks */ + u16 paca_index; /* Logical processor number */ + + u64 kernel_toc; /* Kernel TOC address */ + u64 stab_real; /* Absolute address of segment table */ + u64 stab_addr; /* Virtual address of segment table */ + void *emergency_sp; /* pointer to emergency stack */ + u64 data_offset; /* per cpu data offset */ + s16 hw_cpu_id; /* Physical processor number */ + u8 cpu_start; /* At startup, processor spins until */ + /* this becomes non-zero. */ + struct slb_shadow *slb_shadow_ptr; + + /* + * Now, starting in cacheline 2, the exception save areas + */ + /* used for most interrupts/exceptions */ + u64 exgen[10] __attribute__((aligned(0x80))); + u64 exmc[10]; /* used for machine checks */ + u64 exslb[10]; /* used for SLB/segment table misses + * on the linear mapping */ + + mm_context_t context; + u16 vmalloc_sllp; + u16 slb_cache_ptr; + u16 slb_cache[SLB_CACHE_ENTRIES]; + + /* + * then miscellaneous read-write fields + */ + struct task_struct *__current; /* Pointer to current */ + u64 kstack; /* Saved Kernel stack addr */ + u64 stab_rr; /* stab/slb round-robin counter */ + u64 saved_r1; /* r1 save for RTAS calls */ + u64 saved_msr; /* MSR saved here by enter_rtas */ + u16 trap_save; /* Used when bad stack is encountered */ + u8 soft_enabled; /* irq soft-enable flag */ + u8 hard_enabled; /* set if irqs are enabled in MSR */ + u8 io_sync; /* writel() needs spin_unlock sync */ + + /* Stuff for accurate time accounting */ + u64 user_time; /* accumulated usermode TB ticks */ + u64 system_time; /* accumulated system TB ticks */ + u64 startpurr; /* PURR/TB value snapshot */ + u64 startspurr; /* SPURR value snapshot */ +}; + +extern struct paca_struct paca[]; +extern void initialise_pacas(void); + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_PACA_H */ diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h new file mode 100644 index 00000000000..e088545cb3f --- /dev/null +++ b/arch/powerpc/include/asm/page.h @@ -0,0 +1,225 @@ +#ifndef _ASM_POWERPC_PAGE_H +#define _ASM_POWERPC_PAGE_H + +/* + * Copyright (C) 2001,2005 IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include + +/* + * On PPC32 page size is 4K. For PPC64 we support either 4K or 64K software + * page size. When using 64K pages however, whether we are really supporting + * 64K pages in HW or not is irrelevant to those definitions. + */ +#ifdef CONFIG_PPC_64K_PAGES +#define PAGE_SHIFT 16 +#else +#define PAGE_SHIFT 12 +#endif + +#define PAGE_SIZE (ASM_CONST(1) << PAGE_SHIFT) + +/* We do define AT_SYSINFO_EHDR but don't use the gate mechanism */ +#define __HAVE_ARCH_GATE_AREA 1 + +/* + * Subtle: (1 << PAGE_SHIFT) is an int, not an unsigned long. So if we + * assign PAGE_MASK to a larger type it gets extended the way we want + * (i.e. with 1s in the high bits) + */ +#define PAGE_MASK (~((1 << PAGE_SHIFT) - 1)) + +/* + * KERNELBASE is the virtual address of the start of the kernel, it's often + * the same as PAGE_OFFSET, but _might not be_. + * + * The kdump dump kernel is one example where KERNELBASE != PAGE_OFFSET. + * + * PAGE_OFFSET is the virtual address of the start of lowmem. + * + * PHYSICAL_START is the physical address of the start of the kernel. + * + * MEMORY_START is the physical address of the start of lowmem. + * + * KERNELBASE, PAGE_OFFSET, and PHYSICAL_START are all configurable on + * ppc32 and based on how they are set we determine MEMORY_START. + * + * For the linear mapping the following equation should be true: + * KERNELBASE - PAGE_OFFSET = PHYSICAL_START - MEMORY_START + * + * Also, KERNELBASE >= PAGE_OFFSET and PHYSICAL_START >= MEMORY_START + * + * There are two was to determine a physical address from a virtual one: + * va = pa + PAGE_OFFSET - MEMORY_START + * va = pa + KERNELBASE - PHYSICAL_START + * + * If you want to know something's offset from the start of the kernel you + * should subtract KERNELBASE. + * + * If you want to test if something's a kernel address, use is_kernel_addr(). + */ + +#define KERNELBASE ASM_CONST(CONFIG_KERNEL_START) +#define PAGE_OFFSET ASM_CONST(CONFIG_PAGE_OFFSET) +#define LOAD_OFFSET ASM_CONST((CONFIG_KERNEL_START-CONFIG_PHYSICAL_START)) + +#if defined(CONFIG_RELOCATABLE) && defined(CONFIG_FLATMEM) +#ifndef __ASSEMBLY__ +extern phys_addr_t memstart_addr; +extern phys_addr_t kernstart_addr; +#endif +#define PHYSICAL_START kernstart_addr +#define MEMORY_START memstart_addr +#else +#define PHYSICAL_START ASM_CONST(CONFIG_PHYSICAL_START) +#define MEMORY_START (PHYSICAL_START + PAGE_OFFSET - KERNELBASE) +#endif + +#ifdef CONFIG_FLATMEM +#define ARCH_PFN_OFFSET (MEMORY_START >> PAGE_SHIFT) +#define pfn_valid(pfn) ((pfn) >= ARCH_PFN_OFFSET && (pfn) < (ARCH_PFN_OFFSET + max_mapnr)) +#endif + +#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) +#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) +#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) + +#define __va(x) ((void *)((unsigned long)(x) - PHYSICAL_START + KERNELBASE)) +#define __pa(x) ((unsigned long)(x) + PHYSICAL_START - KERNELBASE) + +/* + * Unfortunately the PLT is in the BSS in the PPC32 ELF ABI, + * and needs to be executable. This means the whole heap ends + * up being executable. + */ +#define VM_DATA_DEFAULT_FLAGS32 (VM_READ | VM_WRITE | VM_EXEC | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) + +#define VM_DATA_DEFAULT_FLAGS64 (VM_READ | VM_WRITE | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) + +#ifdef __powerpc64__ +#include +#else +#include +#endif + +/* align addr on a size boundary - adjust address up/down if needed */ +#define _ALIGN_UP(addr,size) (((addr)+((size)-1))&(~((size)-1))) +#define _ALIGN_DOWN(addr,size) ((addr)&(~((size)-1))) + +/* align addr on a size boundary - adjust address up if needed */ +#define _ALIGN(addr,size) _ALIGN_UP(addr,size) + +/* + * Don't compare things with KERNELBASE or PAGE_OFFSET to test for + * "kernelness", use is_kernel_addr() - it should do what you want. + */ +#define is_kernel_addr(x) ((x) >= PAGE_OFFSET) + +#ifndef __ASSEMBLY__ + +#undef STRICT_MM_TYPECHECKS + +#ifdef STRICT_MM_TYPECHECKS +/* These are used to make use of C type-checking. */ + +/* PTE level */ +typedef struct { pte_basic_t pte; } pte_t; +#define pte_val(x) ((x).pte) +#define __pte(x) ((pte_t) { (x) }) + +/* 64k pages additionally define a bigger "real PTE" type that gathers + * the "second half" part of the PTE for pseudo 64k pages + */ +#ifdef CONFIG_PPC_64K_PAGES +typedef struct { pte_t pte; unsigned long hidx; } real_pte_t; +#else +typedef struct { pte_t pte; } real_pte_t; +#endif + +/* PMD level */ +#ifdef CONFIG_PPC64 +typedef struct { unsigned long pmd; } pmd_t; +#define pmd_val(x) ((x).pmd) +#define __pmd(x) ((pmd_t) { (x) }) + +/* PUD level exusts only on 4k pages */ +#ifndef CONFIG_PPC_64K_PAGES +typedef struct { unsigned long pud; } pud_t; +#define pud_val(x) ((x).pud) +#define __pud(x) ((pud_t) { (x) }) +#endif /* !CONFIG_PPC_64K_PAGES */ +#endif /* CONFIG_PPC64 */ + +/* PGD level */ +typedef struct { unsigned long pgd; } pgd_t; +#define pgd_val(x) ((x).pgd) +#define __pgd(x) ((pgd_t) { (x) }) + +/* Page protection bits */ +typedef struct { unsigned long pgprot; } pgprot_t; +#define pgprot_val(x) ((x).pgprot) +#define __pgprot(x) ((pgprot_t) { (x) }) + +#else + +/* + * .. while these make it easier on the compiler + */ + +typedef pte_basic_t pte_t; +#define pte_val(x) (x) +#define __pte(x) (x) + +#ifdef CONFIG_PPC_64K_PAGES +typedef struct { pte_t pte; unsigned long hidx; } real_pte_t; +#else +typedef unsigned long real_pte_t; +#endif + + +#ifdef CONFIG_PPC64 +typedef unsigned long pmd_t; +#define pmd_val(x) (x) +#define __pmd(x) (x) + +#ifndef CONFIG_PPC_64K_PAGES +typedef unsigned long pud_t; +#define pud_val(x) (x) +#define __pud(x) (x) +#endif /* !CONFIG_PPC_64K_PAGES */ +#endif /* CONFIG_PPC64 */ + +typedef unsigned long pgd_t; +#define pgd_val(x) (x) +#define pgprot_val(x) (x) + +typedef unsigned long pgprot_t; +#define __pgd(x) (x) +#define __pgprot(x) (x) + +#endif + +struct page; +extern void clear_user_page(void *page, unsigned long vaddr, struct page *pg); +extern void copy_user_page(void *to, void *from, unsigned long vaddr, + struct page *p); +extern int page_is_ram(unsigned long pfn); + +struct vm_area_struct; + +typedef struct page *pgtable_t; + +#include +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_PAGE_H */ diff --git a/arch/powerpc/include/asm/page_32.h b/arch/powerpc/include/asm/page_32.h new file mode 100644 index 00000000000..ebfae530a37 --- /dev/null +++ b/arch/powerpc/include/asm/page_32.h @@ -0,0 +1,38 @@ +#ifndef _ASM_POWERPC_PAGE_32_H +#define _ASM_POWERPC_PAGE_32_H + +#if defined(CONFIG_PHYSICAL_ALIGN) && (CONFIG_PHYSICAL_START != 0) +#if (CONFIG_PHYSICAL_START % CONFIG_PHYSICAL_ALIGN) != 0 +#error "CONFIG_PHYSICAL_START must be a multiple of CONFIG_PHYSICAL_ALIGN" +#endif +#endif + +#define VM_DATA_DEFAULT_FLAGS VM_DATA_DEFAULT_FLAGS32 + +#ifdef CONFIG_NOT_COHERENT_CACHE +#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES +#endif + +#ifndef __ASSEMBLY__ +/* + * The basic type of a PTE - 64 bits for those CPUs with > 32 bit + * physical addressing. For now this just the IBM PPC440. + */ +#ifdef CONFIG_PTE_64BIT +typedef unsigned long long pte_basic_t; +#define PTE_SHIFT (PAGE_SHIFT - 3) /* 512 ptes per page */ +#else +typedef unsigned long pte_basic_t; +#define PTE_SHIFT (PAGE_SHIFT - 2) /* 1024 ptes per page */ +#endif + +struct page; +extern void clear_pages(void *page, int order); +static inline void clear_page(void *page) { clear_pages(page, 0); } +extern void copy_page(void *to, void *from); + +#include + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_PAGE_32_H */ diff --git a/arch/powerpc/include/asm/page_64.h b/arch/powerpc/include/asm/page_64.h new file mode 100644 index 00000000000..043bfdfe4f7 --- /dev/null +++ b/arch/powerpc/include/asm/page_64.h @@ -0,0 +1,185 @@ +#ifndef _ASM_POWERPC_PAGE_64_H +#define _ASM_POWERPC_PAGE_64_H + +/* + * Copyright (C) 2001 PPC64 Team, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/* + * We always define HW_PAGE_SHIFT to 12 as use of 64K pages remains Linux + * specific, every notion of page number shared with the firmware, TCEs, + * iommu, etc... still uses a page size of 4K. + */ +#define HW_PAGE_SHIFT 12 +#define HW_PAGE_SIZE (ASM_CONST(1) << HW_PAGE_SHIFT) +#define HW_PAGE_MASK (~(HW_PAGE_SIZE-1)) + +/* + * PAGE_FACTOR is the number of bits factor between PAGE_SHIFT and + * HW_PAGE_SHIFT, that is 4K pages. + */ +#define PAGE_FACTOR (PAGE_SHIFT - HW_PAGE_SHIFT) + +/* Segment size; normal 256M segments */ +#define SID_SHIFT 28 +#define SID_MASK ASM_CONST(0xfffffffff) +#define ESID_MASK 0xfffffffff0000000UL +#define GET_ESID(x) (((x) >> SID_SHIFT) & SID_MASK) + +/* 1T segments */ +#define SID_SHIFT_1T 40 +#define SID_MASK_1T 0xffffffUL +#define ESID_MASK_1T 0xffffff0000000000UL +#define GET_ESID_1T(x) (((x) >> SID_SHIFT_1T) & SID_MASK_1T) + +#ifndef __ASSEMBLY__ +#include + +typedef unsigned long pte_basic_t; + +static __inline__ void clear_page(void *addr) +{ + unsigned long lines, line_size; + + line_size = ppc64_caches.dline_size; + lines = ppc64_caches.dlines_per_page; + + __asm__ __volatile__( + "mtctr %1 # clear_page\n\ +1: dcbz 0,%0\n\ + add %0,%0,%3\n\ + bdnz+ 1b" + : "=r" (addr) + : "r" (lines), "0" (addr), "r" (line_size) + : "ctr", "memory"); +} + +extern void copy_4K_page(void *to, void *from); + +#ifdef CONFIG_PPC_64K_PAGES +static inline void copy_page(void *to, void *from) +{ + unsigned int i; + for (i=0; i < (1 << (PAGE_SHIFT - 12)); i++) { + copy_4K_page(to, from); + to += 4096; + from += 4096; + } +} +#else /* CONFIG_PPC_64K_PAGES */ +static inline void copy_page(void *to, void *from) +{ + copy_4K_page(to, from); +} +#endif /* CONFIG_PPC_64K_PAGES */ + +/* Log 2 of page table size */ +extern u64 ppc64_pft_size; + +/* Large pages size */ +#ifdef CONFIG_HUGETLB_PAGE +extern unsigned int HPAGE_SHIFT; +#else +#define HPAGE_SHIFT PAGE_SHIFT +#endif +#define HPAGE_SIZE ((1UL) << HPAGE_SHIFT) +#define HPAGE_MASK (~(HPAGE_SIZE - 1)) +#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT) +#define HUGE_MAX_HSTATE 3 + +#endif /* __ASSEMBLY__ */ + +#ifdef CONFIG_PPC_MM_SLICES + +#define SLICE_LOW_SHIFT 28 +#define SLICE_HIGH_SHIFT 40 + +#define SLICE_LOW_TOP (0x100000000ul) +#define SLICE_NUM_LOW (SLICE_LOW_TOP >> SLICE_LOW_SHIFT) +#define SLICE_NUM_HIGH (PGTABLE_RANGE >> SLICE_HIGH_SHIFT) + +#define GET_LOW_SLICE_INDEX(addr) ((addr) >> SLICE_LOW_SHIFT) +#define GET_HIGH_SLICE_INDEX(addr) ((addr) >> SLICE_HIGH_SHIFT) + +#ifndef __ASSEMBLY__ + +struct slice_mask { + u16 low_slices; + u16 high_slices; +}; + +struct mm_struct; + +extern unsigned long slice_get_unmapped_area(unsigned long addr, + unsigned long len, + unsigned long flags, + unsigned int psize, + int topdown, + int use_cache); + +extern unsigned int get_slice_psize(struct mm_struct *mm, + unsigned long addr); + +extern void slice_init_context(struct mm_struct *mm, unsigned int psize); +extern void slice_set_user_psize(struct mm_struct *mm, unsigned int psize); +extern void slice_set_range_psize(struct mm_struct *mm, unsigned long start, + unsigned long len, unsigned int psize); + +#define slice_mm_new_context(mm) ((mm)->context.id == 0) + +#endif /* __ASSEMBLY__ */ +#else +#define slice_init() +#define get_slice_psize(mm, addr) ((mm)->context.user_psize) +#define slice_set_user_psize(mm, psize) \ +do { \ + (mm)->context.user_psize = (psize); \ + (mm)->context.sllp = SLB_VSID_USER | mmu_psize_defs[(psize)].sllp; \ +} while (0) +#define slice_set_range_psize(mm, start, len, psize) \ + slice_set_user_psize((mm), (psize)) +#define slice_mm_new_context(mm) 1 +#endif /* CONFIG_PPC_MM_SLICES */ + +#ifdef CONFIG_HUGETLB_PAGE + +#define HAVE_ARCH_HUGETLB_UNMAPPED_AREA + +#endif /* !CONFIG_HUGETLB_PAGE */ + +#ifdef MODULE +#define __page_aligned __attribute__((__aligned__(PAGE_SIZE))) +#else +#define __page_aligned \ + __attribute__((__aligned__(PAGE_SIZE), \ + __section__(".data.page_aligned"))) +#endif + +#define VM_DATA_DEFAULT_FLAGS \ + (test_thread_flag(TIF_32BIT) ? \ + VM_DATA_DEFAULT_FLAGS32 : VM_DATA_DEFAULT_FLAGS64) + +/* + * This is the default if a program doesn't have a PT_GNU_STACK + * program header entry. The PPC64 ELF ABI has a non executable stack + * stack by default, so in the absense of a PT_GNU_STACK program header + * we turn execute permission off. + */ +#define VM_STACK_DEFAULT_FLAGS32 (VM_READ | VM_WRITE | VM_EXEC | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) + +#define VM_STACK_DEFAULT_FLAGS64 (VM_READ | VM_WRITE | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) + +#define VM_STACK_DEFAULT_FLAGS \ + (test_thread_flag(TIF_32BIT) ? \ + VM_STACK_DEFAULT_FLAGS32 : VM_STACK_DEFAULT_FLAGS64) + +#include + +#endif /* _ASM_POWERPC_PAGE_64_H */ diff --git a/arch/powerpc/include/asm/param.h b/arch/powerpc/include/asm/param.h new file mode 100644 index 00000000000..094f63d4d5c --- /dev/null +++ b/arch/powerpc/include/asm/param.h @@ -0,0 +1,22 @@ +#ifndef _ASM_POWERPC_PARAM_H +#define _ASM_POWERPC_PARAM_H + +#ifdef __KERNEL__ +#define HZ CONFIG_HZ /* internal kernel timer frequency */ +#define USER_HZ 100 /* for user interfaces in "ticks" */ +#define CLOCKS_PER_SEC (USER_HZ) /* frequency at which times() counts */ +#endif /* __KERNEL__ */ + +#ifndef HZ +#define HZ 100 +#endif + +#define EXEC_PAGESIZE 4096 + +#ifndef NOGROUP +#define NOGROUP (-1) +#endif + +#define MAXHOSTNAMELEN 64 /* max length of hostname */ + +#endif /* _ASM_POWERPC_PARAM_H */ diff --git a/arch/powerpc/include/asm/parport.h b/arch/powerpc/include/asm/parport.h new file mode 100644 index 00000000000..414c50e2e88 --- /dev/null +++ b/arch/powerpc/include/asm/parport.h @@ -0,0 +1,39 @@ +/* + * parport.h: platform-specific PC-style parport initialisation + * + * Copyright (C) 1999, 2000 Tim Waugh + * + * This file should only be included by drivers/parport/parport_pc.c. + */ + +#ifndef _ASM_POWERPC_PARPORT_H +#define _ASM_POWERPC_PARPORT_H +#ifdef __KERNEL__ + +#include + +static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma) +{ + struct device_node *np; + const u32 *prop; + u32 io1, io2; + int propsize; + int count = 0; + for (np = NULL; (np = of_find_compatible_node(np, + "parallel", + "pnpPNP,400")) != NULL;) { + prop = of_get_property(np, "reg", &propsize); + if (!prop || propsize > 6*sizeof(u32)) + continue; + io1 = prop[1]; io2 = prop[2]; + prop = of_get_property(np, "interrupts", NULL); + if (!prop) + continue; + if (parport_pc_probe_port(io1, io2, prop[0], autodma, NULL) != NULL) + count++; + } + return count; +} + +#endif /* __KERNEL__ */ +#endif /* !(_ASM_POWERPC_PARPORT_H) */ diff --git a/arch/powerpc/include/asm/pasemi_dma.h b/arch/powerpc/include/asm/pasemi_dma.h new file mode 100644 index 00000000000..19fd7933e2d --- /dev/null +++ b/arch/powerpc/include/asm/pasemi_dma.h @@ -0,0 +1,538 @@ +/* + * Copyright (C) 2006-2008 PA Semi, Inc + * + * Hardware register layout and descriptor formats for the on-board + * DMA engine on PA Semi PWRficient. Used by ethernet, function and security + * drivers. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef ASM_PASEMI_DMA_H +#define ASM_PASEMI_DMA_H + +/* status register layout in IOB region, at 0xfb800000 */ +struct pasdma_status { + u64 rx_sta[64]; /* RX channel status */ + u64 tx_sta[20]; /* TX channel status */ +}; + + +/* All these registers live in the PCI configuration space for the DMA PCI + * device. Use the normal PCI config access functions for them. + */ +enum { + PAS_DMA_CAP_TXCH = 0x44, /* Transmit Channel Info */ + PAS_DMA_CAP_RXCH = 0x48, /* Transmit Channel Info */ + PAS_DMA_CAP_IFI = 0x4c, /* Interface Info */ + PAS_DMA_COM_TXCMD = 0x100, /* Transmit Command Register */ + PAS_DMA_COM_TXSTA = 0x104, /* Transmit Status Register */ + PAS_DMA_COM_RXCMD = 0x108, /* Receive Command Register */ + PAS_DMA_COM_RXSTA = 0x10c, /* Receive Status Register */ + PAS_DMA_COM_CFG = 0x114, /* Common config reg */ + PAS_DMA_TXF_SFLG0 = 0x140, /* Set flags */ + PAS_DMA_TXF_SFLG1 = 0x144, /* Set flags */ + PAS_DMA_TXF_CFLG0 = 0x148, /* Set flags */ + PAS_DMA_TXF_CFLG1 = 0x14c, /* Set flags */ +}; + + +#define PAS_DMA_CAP_TXCH_TCHN_M 0x00ff0000 /* # of TX channels */ +#define PAS_DMA_CAP_TXCH_TCHN_S 16 + +#define PAS_DMA_CAP_RXCH_RCHN_M 0x00ff0000 /* # of RX channels */ +#define PAS_DMA_CAP_RXCH_RCHN_S 16 + +#define PAS_DMA_CAP_IFI_IOFF_M 0xff000000 /* Cfg reg for intf pointers */ +#define PAS_DMA_CAP_IFI_IOFF_S 24 +#define PAS_DMA_CAP_IFI_NIN_M 0x00ff0000 /* # of interfaces */ +#define PAS_DMA_CAP_IFI_NIN_S 16 + +#define PAS_DMA_COM_TXCMD_EN 0x00000001 /* enable */ +#define PAS_DMA_COM_TXSTA_ACT 0x00000001 /* active */ +#define PAS_DMA_COM_RXCMD_EN 0x00000001 /* enable */ +#define PAS_DMA_COM_RXSTA_ACT 0x00000001 /* active */ + + +/* Per-interface and per-channel registers */ +#define _PAS_DMA_RXINT_STRIDE 0x20 +#define PAS_DMA_RXINT_RCMDSTA(i) (0x200+(i)*_PAS_DMA_RXINT_STRIDE) +#define PAS_DMA_RXINT_RCMDSTA_EN 0x00000001 +#define PAS_DMA_RXINT_RCMDSTA_ST 0x00000002 +#define PAS_DMA_RXINT_RCMDSTA_MBT 0x00000008 +#define PAS_DMA_RXINT_RCMDSTA_MDR 0x00000010 +#define PAS_DMA_RXINT_RCMDSTA_MOO 0x00000020 +#define PAS_DMA_RXINT_RCMDSTA_MBP 0x00000040 +#define PAS_DMA_RXINT_RCMDSTA_BT 0x00000800 +#define PAS_DMA_RXINT_RCMDSTA_DR 0x00001000 +#define PAS_DMA_RXINT_RCMDSTA_OO 0x00002000 +#define PAS_DMA_RXINT_RCMDSTA_BP 0x00004000 +#define PAS_DMA_RXINT_RCMDSTA_TB 0x00008000 +#define PAS_DMA_RXINT_RCMDSTA_ACT 0x00010000 +#define PAS_DMA_RXINT_RCMDSTA_DROPS_M 0xfffe0000 +#define PAS_DMA_RXINT_RCMDSTA_DROPS_S 17 +#define PAS_DMA_RXINT_CFG(i) (0x204+(i)*_PAS_DMA_RXINT_STRIDE) +#define PAS_DMA_RXINT_CFG_RBP 0x80000000 +#define PAS_DMA_RXINT_CFG_ITRR 0x40000000 +#define PAS_DMA_RXINT_CFG_DHL_M 0x07000000 +#define PAS_DMA_RXINT_CFG_DHL_S 24 +#define PAS_DMA_RXINT_CFG_DHL(x) (((x) << PAS_DMA_RXINT_CFG_DHL_S) & \ + PAS_DMA_RXINT_CFG_DHL_M) +#define PAS_DMA_RXINT_CFG_ITR 0x00400000 +#define PAS_DMA_RXINT_CFG_LW 0x00200000 +#define PAS_DMA_RXINT_CFG_L2 0x00100000 +#define PAS_DMA_RXINT_CFG_HEN 0x00080000 +#define PAS_DMA_RXINT_CFG_WIF 0x00000002 +#define PAS_DMA_RXINT_CFG_WIL 0x00000001 + +#define PAS_DMA_RXINT_INCR(i) (0x210+(i)*_PAS_DMA_RXINT_STRIDE) +#define PAS_DMA_RXINT_INCR_INCR_M 0x0000ffff +#define PAS_DMA_RXINT_INCR_INCR_S 0 +#define PAS_DMA_RXINT_INCR_INCR(x) ((x) & 0x0000ffff) +#define PAS_DMA_RXINT_BASEL(i) (0x218+(i)*_PAS_DMA_RXINT_STRIDE) +#define PAS_DMA_RXINT_BASEL_BRBL(x) ((x) & ~0x3f) +#define PAS_DMA_RXINT_BASEU(i) (0x21c+(i)*_PAS_DMA_RXINT_STRIDE) +#define PAS_DMA_RXINT_BASEU_BRBH(x) ((x) & 0xfff) +#define PAS_DMA_RXINT_BASEU_SIZ_M 0x3fff0000 /* # of cache lines worth of buffer ring */ +#define PAS_DMA_RXINT_BASEU_SIZ_S 16 /* 0 = 16K */ +#define PAS_DMA_RXINT_BASEU_SIZ(x) (((x) << PAS_DMA_RXINT_BASEU_SIZ_S) & \ + PAS_DMA_RXINT_BASEU_SIZ_M) + + +#define _PAS_DMA_TXCHAN_STRIDE 0x20 /* Size per channel */ +#define _PAS_DMA_TXCHAN_TCMDSTA 0x300 /* Command / Status */ +#define _PAS_DMA_TXCHAN_CFG 0x304 /* Configuration */ +#define _PAS_DMA_TXCHAN_DSCRBU 0x308 /* Descriptor BU Allocation */ +#define _PAS_DMA_TXCHAN_INCR 0x310 /* Descriptor increment */ +#define _PAS_DMA_TXCHAN_CNT 0x314 /* Descriptor count/offset */ +#define _PAS_DMA_TXCHAN_BASEL 0x318 /* Descriptor ring base (low) */ +#define _PAS_DMA_TXCHAN_BASEU 0x31c /* (high) */ +#define PAS_DMA_TXCHAN_TCMDSTA(c) (0x300+(c)*_PAS_DMA_TXCHAN_STRIDE) +#define PAS_DMA_TXCHAN_TCMDSTA_EN 0x00000001 /* Enabled */ +#define PAS_DMA_TXCHAN_TCMDSTA_ST 0x00000002 /* Stop interface */ +#define PAS_DMA_TXCHAN_TCMDSTA_ACT 0x00010000 /* Active */ +#define PAS_DMA_TXCHAN_TCMDSTA_SZ 0x00000800 +#define PAS_DMA_TXCHAN_TCMDSTA_DB 0x00000400 +#define PAS_DMA_TXCHAN_TCMDSTA_DE 0x00000200 +#define PAS_DMA_TXCHAN_TCMDSTA_DA 0x00000100 +#define PAS_DMA_TXCHAN_CFG(c) (0x304+(c)*_PAS_DMA_TXCHAN_STRIDE) +#define PAS_DMA_TXCHAN_CFG_TY_IFACE 0x00000000 /* Type = interface */ +#define PAS_DMA_TXCHAN_CFG_TY_COPY 0x00000001 /* Type = copy only */ +#define PAS_DMA_TXCHAN_CFG_TY_FUNC 0x00000002 /* Type = function */ +#define PAS_DMA_TXCHAN_CFG_TY_XOR 0x00000003 /* Type = xor only */ +#define PAS_DMA_TXCHAN_CFG_TATTR_M 0x0000003c +#define PAS_DMA_TXCHAN_CFG_TATTR_S 2 +#define PAS_DMA_TXCHAN_CFG_TATTR(x) (((x) << PAS_DMA_TXCHAN_CFG_TATTR_S) & \ + PAS_DMA_TXCHAN_CFG_TATTR_M) +#define PAS_DMA_TXCHAN_CFG_LPDQ 0x00000800 +#define PAS_DMA_TXCHAN_CFG_LPSQ 0x00000400 +#define PAS_DMA_TXCHAN_CFG_WT_M 0x000003c0 +#define PAS_DMA_TXCHAN_CFG_WT_S 6 +#define PAS_DMA_TXCHAN_CFG_WT(x) (((x) << PAS_DMA_TXCHAN_CFG_WT_S) & \ + PAS_DMA_TXCHAN_CFG_WT_M) +#define PAS_DMA_TXCHAN_CFG_TRD 0x00010000 /* translate data */ +#define PAS_DMA_TXCHAN_CFG_TRR 0x00008000 /* translate rings */ +#define PAS_DMA_TXCHAN_CFG_UP 0x00004000 /* update tx descr when sent */ +#define PAS_DMA_TXCHAN_CFG_CL 0x00002000 /* Clean last line */ +#define PAS_DMA_TXCHAN_CFG_CF 0x00001000 /* Clean first line */ +#define PAS_DMA_TXCHAN_INCR(c) (0x310+(c)*_PAS_DMA_TXCHAN_STRIDE) +#define PAS_DMA_TXCHAN_BASEL(c) (0x318+(c)*_PAS_DMA_TXCHAN_STRIDE) +#define PAS_DMA_TXCHAN_BASEL_BRBL_M 0xffffffc0 +#define PAS_DMA_TXCHAN_BASEL_BRBL_S 0 +#define PAS_DMA_TXCHAN_BASEL_BRBL(x) (((x) << PAS_DMA_TXCHAN_BASEL_BRBL_S) & \ + PAS_DMA_TXCHAN_BASEL_BRBL_M) +#define PAS_DMA_TXCHAN_BASEU(c) (0x31c+(c)*_PAS_DMA_TXCHAN_STRIDE) +#define PAS_DMA_TXCHAN_BASEU_BRBH_M 0x00000fff +#define PAS_DMA_TXCHAN_BASEU_BRBH_S 0 +#define PAS_DMA_TXCHAN_BASEU_BRBH(x) (((x) << PAS_DMA_TXCHAN_BASEU_BRBH_S) & \ + PAS_DMA_TXCHAN_BASEU_BRBH_M) +/* # of cache lines worth of buffer ring */ +#define PAS_DMA_TXCHAN_BASEU_SIZ_M 0x3fff0000 +#define PAS_DMA_TXCHAN_BASEU_SIZ_S 16 /* 0 = 16K */ +#define PAS_DMA_TXCHAN_BASEU_SIZ(x) (((x) << PAS_DMA_TXCHAN_BASEU_SIZ_S) & \ + PAS_DMA_TXCHAN_BASEU_SIZ_M) + +#define _PAS_DMA_RXCHAN_STRIDE 0x20 /* Size per channel */ +#define _PAS_DMA_RXCHAN_CCMDSTA 0x800 /* Command / Status */ +#define _PAS_DMA_RXCHAN_CFG 0x804 /* Configuration */ +#define _PAS_DMA_RXCHAN_INCR 0x810 /* Descriptor increment */ +#define _PAS_DMA_RXCHAN_CNT 0x814 /* Descriptor count/offset */ +#define _PAS_DMA_RXCHAN_BASEL 0x818 /* Descriptor ring base (low) */ +#define _PAS_DMA_RXCHAN_BASEU 0x81c /* (high) */ +#define PAS_DMA_RXCHAN_CCMDSTA(c) (0x800+(c)*_PAS_DMA_RXCHAN_STRIDE) +#define PAS_DMA_RXCHAN_CCMDSTA_EN 0x00000001 /* Enabled */ +#define PAS_DMA_RXCHAN_CCMDSTA_ST 0x00000002 /* Stop interface */ +#define PAS_DMA_RXCHAN_CCMDSTA_ACT 0x00010000 /* Active */ +#define PAS_DMA_RXCHAN_CCMDSTA_DU 0x00020000 +#define PAS_DMA_RXCHAN_CCMDSTA_OD 0x00002000 +#define PAS_DMA_RXCHAN_CCMDSTA_FD 0x00001000 +#define PAS_DMA_RXCHAN_CCMDSTA_DT 0x00000800 +#define PAS_DMA_RXCHAN_CFG(c) (0x804+(c)*_PAS_DMA_RXCHAN_STRIDE) +#define PAS_DMA_RXCHAN_CFG_CTR 0x00000400 +#define PAS_DMA_RXCHAN_CFG_HBU_M 0x00000380 +#define PAS_DMA_RXCHAN_CFG_HBU_S 7 +#define PAS_DMA_RXCHAN_CFG_HBU(x) (((x) << PAS_DMA_RXCHAN_CFG_HBU_S) & \ + PAS_DMA_RXCHAN_CFG_HBU_M) +#define PAS_DMA_RXCHAN_INCR(c) (0x810+(c)*_PAS_DMA_RXCHAN_STRIDE) +#define PAS_DMA_RXCHAN_BASEL(c) (0x818+(c)*_PAS_DMA_RXCHAN_STRIDE) +#define PAS_DMA_RXCHAN_BASEL_BRBL_M 0xffffffc0 +#define PAS_DMA_RXCHAN_BASEL_BRBL_S 0 +#define PAS_DMA_RXCHAN_BASEL_BRBL(x) (((x) << PAS_DMA_RXCHAN_BASEL_BRBL_S) & \ + PAS_DMA_RXCHAN_BASEL_BRBL_M) +#define PAS_DMA_RXCHAN_BASEU(c) (0x81c+(c)*_PAS_DMA_RXCHAN_STRIDE) +#define PAS_DMA_RXCHAN_BASEU_BRBH_M 0x00000fff +#define PAS_DMA_RXCHAN_BASEU_BRBH_S 0 +#define PAS_DMA_RXCHAN_BASEU_BRBH(x) (((x) << PAS_DMA_RXCHAN_BASEU_BRBH_S) & \ + PAS_DMA_RXCHAN_BASEU_BRBH_M) +/* # of cache lines worth of buffer ring */ +#define PAS_DMA_RXCHAN_BASEU_SIZ_M 0x3fff0000 +#define PAS_DMA_RXCHAN_BASEU_SIZ_S 16 /* 0 = 16K */ +#define PAS_DMA_RXCHAN_BASEU_SIZ(x) (((x) << PAS_DMA_RXCHAN_BASEU_SIZ_S) & \ + PAS_DMA_RXCHAN_BASEU_SIZ_M) + +#define PAS_STATUS_PCNT_M 0x000000000000ffffull +#define PAS_STATUS_PCNT_S 0 +#define PAS_STATUS_DCNT_M 0x00000000ffff0000ull +#define PAS_STATUS_DCNT_S 16 +#define PAS_STATUS_BPCNT_M 0x0000ffff00000000ull +#define PAS_STATUS_BPCNT_S 32 +#define PAS_STATUS_CAUSE_M 0xf000000000000000ull +#define PAS_STATUS_TIMER 0x1000000000000000ull +#define PAS_STATUS_ERROR 0x2000000000000000ull +#define PAS_STATUS_SOFT 0x4000000000000000ull +#define PAS_STATUS_INT 0x8000000000000000ull + +#define PAS_IOB_COM_PKTHDRCNT 0x120 +#define PAS_IOB_COM_PKTHDRCNT_PKTHDR1_M 0x0fff0000 +#define PAS_IOB_COM_PKTHDRCNT_PKTHDR1_S 16 +#define PAS_IOB_COM_PKTHDRCNT_PKTHDR0_M 0x00000fff +#define PAS_IOB_COM_PKTHDRCNT_PKTHDR0_S 0 + +#define PAS_IOB_DMA_RXCH_CFG(i) (0x1100 + (i)*4) +#define PAS_IOB_DMA_RXCH_CFG_CNTTH_M 0x00000fff +#define PAS_IOB_DMA_RXCH_CFG_CNTTH_S 0 +#define PAS_IOB_DMA_RXCH_CFG_CNTTH(x) (((x) << PAS_IOB_DMA_RXCH_CFG_CNTTH_S) & \ + PAS_IOB_DMA_RXCH_CFG_CNTTH_M) +#define PAS_IOB_DMA_TXCH_CFG(i) (0x1200 + (i)*4) +#define PAS_IOB_DMA_TXCH_CFG_CNTTH_M 0x00000fff +#define PAS_IOB_DMA_TXCH_CFG_CNTTH_S 0 +#define PAS_IOB_DMA_TXCH_CFG_CNTTH(x) (((x) << PAS_IOB_DMA_TXCH_CFG_CNTTH_S) & \ + PAS_IOB_DMA_TXCH_CFG_CNTTH_M) +#define PAS_IOB_DMA_RXCH_STAT(i) (0x1300 + (i)*4) +#define PAS_IOB_DMA_RXCH_STAT_INTGEN 0x00001000 +#define PAS_IOB_DMA_RXCH_STAT_CNTDEL_M 0x00000fff +#define PAS_IOB_DMA_RXCH_STAT_CNTDEL_S 0 +#define PAS_IOB_DMA_RXCH_STAT_CNTDEL(x) (((x) << PAS_IOB_DMA_RXCH_STAT_CNTDEL_S) &\ + PAS_IOB_DMA_RXCH_STAT_CNTDEL_M) +#define PAS_IOB_DMA_TXCH_STAT(i) (0x1400 + (i)*4) +#define PAS_IOB_DMA_TXCH_STAT_INTGEN 0x00001000 +#define PAS_IOB_DMA_TXCH_STAT_CNTDEL_M 0x00000fff +#define PAS_IOB_DMA_TXCH_STAT_CNTDEL_S 0 +#define PAS_IOB_DMA_TXCH_STAT_CNTDEL(x) (((x) << PAS_IOB_DMA_TXCH_STAT_CNTDEL_S) &\ + PAS_IOB_DMA_TXCH_STAT_CNTDEL_M) +#define PAS_IOB_DMA_RXCH_RESET(i) (0x1500 + (i)*4) +#define PAS_IOB_DMA_RXCH_RESET_PCNT_M 0xffff0000 +#define PAS_IOB_DMA_RXCH_RESET_PCNT_S 16 +#define PAS_IOB_DMA_RXCH_RESET_PCNT(x) (((x) << PAS_IOB_DMA_RXCH_RESET_PCNT_S) & \ + PAS_IOB_DMA_RXCH_RESET_PCNT_M) +#define PAS_IOB_DMA_RXCH_RESET_PCNTRST 0x00000020 +#define PAS_IOB_DMA_RXCH_RESET_DCNTRST 0x00000010 +#define PAS_IOB_DMA_RXCH_RESET_TINTC 0x00000008 +#define PAS_IOB_DMA_RXCH_RESET_DINTC 0x00000004 +#define PAS_IOB_DMA_RXCH_RESET_SINTC 0x00000002 +#define PAS_IOB_DMA_RXCH_RESET_PINTC 0x00000001 +#define PAS_IOB_DMA_TXCH_RESET(i) (0x1600 + (i)*4) +#define PAS_IOB_DMA_TXCH_RESET_PCNT_M 0xffff0000 +#define PAS_IOB_DMA_TXCH_RESET_PCNT_S 16 +#define PAS_IOB_DMA_TXCH_RESET_PCNT(x) (((x) << PAS_IOB_DMA_TXCH_RESET_PCNT_S) & \ + PAS_IOB_DMA_TXCH_RESET_PCNT_M) +#define PAS_IOB_DMA_TXCH_RESET_PCNTRST 0x00000020 +#define PAS_IOB_DMA_TXCH_RESET_DCNTRST 0x00000010 +#define PAS_IOB_DMA_TXCH_RESET_TINTC 0x00000008 +#define PAS_IOB_DMA_TXCH_RESET_DINTC 0x00000004 +#define PAS_IOB_DMA_TXCH_RESET_SINTC 0x00000002 +#define PAS_IOB_DMA_TXCH_RESET_PINTC 0x00000001 + +#define PAS_IOB_DMA_COM_TIMEOUTCFG 0x1700 +#define PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_M 0x00ffffff +#define PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_S 0 +#define PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT(x) (((x) << PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_S) & \ + PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_M) + +/* Transmit descriptor fields */ +#define XCT_MACTX_T 0x8000000000000000ull +#define XCT_MACTX_ST 0x4000000000000000ull +#define XCT_MACTX_NORES 0x0000000000000000ull +#define XCT_MACTX_8BRES 0x1000000000000000ull +#define XCT_MACTX_24BRES 0x2000000000000000ull +#define XCT_MACTX_40BRES 0x3000000000000000ull +#define XCT_MACTX_I 0x0800000000000000ull +#define XCT_MACTX_O 0x0400000000000000ull +#define XCT_MACTX_E 0x0200000000000000ull +#define XCT_MACTX_VLAN_M 0x0180000000000000ull +#define XCT_MACTX_VLAN_NOP 0x0000000000000000ull +#define XCT_MACTX_VLAN_REMOVE 0x0080000000000000ull +#define XCT_MACTX_VLAN_INSERT 0x0100000000000000ull +#define XCT_MACTX_VLAN_REPLACE 0x0180000000000000ull +#define XCT_MACTX_CRC_M 0x0060000000000000ull +#define XCT_MACTX_CRC_NOP 0x0000000000000000ull +#define XCT_MACTX_CRC_INSERT 0x0020000000000000ull +#define XCT_MACTX_CRC_PAD 0x0040000000000000ull +#define XCT_MACTX_CRC_REPLACE 0x0060000000000000ull +#define XCT_MACTX_SS 0x0010000000000000ull +#define XCT_MACTX_LLEN_M 0x00007fff00000000ull +#define XCT_MACTX_LLEN_S 32ull +#define XCT_MACTX_LLEN(x) ((((long)(x)) << XCT_MACTX_LLEN_S) & \ + XCT_MACTX_LLEN_M) +#define XCT_MACTX_IPH_M 0x00000000f8000000ull +#define XCT_MACTX_IPH_S 27ull +#define XCT_MACTX_IPH(x) ((((long)(x)) << XCT_MACTX_IPH_S) & \ + XCT_MACTX_IPH_M) +#define XCT_MACTX_IPO_M 0x0000000007c00000ull +#define XCT_MACTX_IPO_S 22ull +#define XCT_MACTX_IPO(x) ((((long)(x)) << XCT_MACTX_IPO_S) & \ + XCT_MACTX_IPO_M) +#define XCT_MACTX_CSUM_M 0x0000000000000060ull +#define XCT_MACTX_CSUM_NOP 0x0000000000000000ull +#define XCT_MACTX_CSUM_TCP 0x0000000000000040ull +#define XCT_MACTX_CSUM_UDP 0x0000000000000060ull +#define XCT_MACTX_V6 0x0000000000000010ull +#define XCT_MACTX_C 0x0000000000000004ull +#define XCT_MACTX_AL2 0x0000000000000002ull + +/* Receive descriptor fields */ +#define XCT_MACRX_T 0x8000000000000000ull +#define XCT_MACRX_ST 0x4000000000000000ull +#define XCT_MACRX_RR_M 0x3000000000000000ull +#define XCT_MACRX_RR_NORES 0x0000000000000000ull +#define XCT_MACRX_RR_8BRES 0x1000000000000000ull +#define XCT_MACRX_O 0x0400000000000000ull +#define XCT_MACRX_E 0x0200000000000000ull +#define XCT_MACRX_FF 0x0100000000000000ull +#define XCT_MACRX_PF 0x0080000000000000ull +#define XCT_MACRX_OB 0x0040000000000000ull +#define XCT_MACRX_OD 0x0020000000000000ull +#define XCT_MACRX_FS 0x0010000000000000ull +#define XCT_MACRX_NB_M 0x000fc00000000000ull +#define XCT_MACRX_NB_S 46ULL +#define XCT_MACRX_NB(x) ((((long)(x)) << XCT_MACRX_NB_S) & \ + XCT_MACRX_NB_M) +#define XCT_MACRX_LLEN_M 0x00003fff00000000ull +#define XCT_MACRX_LLEN_S 32ULL +#define XCT_MACRX_LLEN(x) ((((long)(x)) << XCT_MACRX_LLEN_S) & \ + XCT_MACRX_LLEN_M) +#define XCT_MACRX_CRC 0x0000000080000000ull +#define XCT_MACRX_LEN_M 0x0000000060000000ull +#define XCT_MACRX_LEN_TOOSHORT 0x0000000020000000ull +#define XCT_MACRX_LEN_BELOWMIN 0x0000000040000000ull +#define XCT_MACRX_LEN_TRUNC 0x0000000060000000ull +#define XCT_MACRX_CAST_M 0x0000000018000000ull +#define XCT_MACRX_CAST_UNI 0x0000000000000000ull +#define XCT_MACRX_CAST_MULTI 0x0000000008000000ull +#define XCT_MACRX_CAST_BROAD 0x0000000010000000ull +#define XCT_MACRX_CAST_PAUSE 0x0000000018000000ull +#define XCT_MACRX_VLC_M 0x0000000006000000ull +#define XCT_MACRX_FM 0x0000000001000000ull +#define XCT_MACRX_HTY_M 0x0000000000c00000ull +#define XCT_MACRX_HTY_IPV4_OK 0x0000000000000000ull +#define XCT_MACRX_HTY_IPV6 0x0000000000400000ull +#define XCT_MACRX_HTY_IPV4_BAD 0x0000000000800000ull +#define XCT_MACRX_HTY_NONIP 0x0000000000c00000ull +#define XCT_MACRX_IPP_M 0x00000000003f0000ull +#define XCT_MACRX_IPP_S 16 +#define XCT_MACRX_CSUM_M 0x000000000000ffffull +#define XCT_MACRX_CSUM_S 0 + +#define XCT_PTR_T 0x8000000000000000ull +#define XCT_PTR_LEN_M 0x7ffff00000000000ull +#define XCT_PTR_LEN_S 44 +#define XCT_PTR_LEN(x) ((((long)(x)) << XCT_PTR_LEN_S) & \ + XCT_PTR_LEN_M) +#define XCT_PTR_ADDR_M 0x00000fffffffffffull +#define XCT_PTR_ADDR_S 0 +#define XCT_PTR_ADDR(x) ((((long)(x)) << XCT_PTR_ADDR_S) & \ + XCT_PTR_ADDR_M) + +/* Receive interface 8byte result fields */ +#define XCT_RXRES_8B_L4O_M 0xff00000000000000ull +#define XCT_RXRES_8B_L4O_S 56 +#define XCT_RXRES_8B_RULE_M 0x00ffff0000000000ull +#define XCT_RXRES_8B_RULE_S 40 +#define XCT_RXRES_8B_EVAL_M 0x000000ffff000000ull +#define XCT_RXRES_8B_EVAL_S 24 +#define XCT_RXRES_8B_HTYPE_M 0x0000000000f00000ull +#define XCT_RXRES_8B_HASH_M 0x00000000000fffffull +#define XCT_RXRES_8B_HASH_S 0 + +/* Receive interface buffer fields */ +#define XCT_RXB_LEN_M 0x0ffff00000000000ull +#define XCT_RXB_LEN_S 44 +#define XCT_RXB_LEN(x) ((((long)(x)) << XCT_RXB_LEN_S) & \ + XCT_RXB_LEN_M) +#define XCT_RXB_ADDR_M 0x00000fffffffffffull +#define XCT_RXB_ADDR_S 0 +#define XCT_RXB_ADDR(x) ((((long)(x)) << XCT_RXB_ADDR_S) & \ + XCT_RXB_ADDR_M) + +/* Copy descriptor fields */ +#define XCT_COPY_T 0x8000000000000000ull +#define XCT_COPY_ST 0x4000000000000000ull +#define XCT_COPY_RR_M 0x3000000000000000ull +#define XCT_COPY_RR_NORES 0x0000000000000000ull +#define XCT_COPY_RR_8BRES 0x1000000000000000ull +#define XCT_COPY_RR_24BRES 0x2000000000000000ull +#define XCT_COPY_RR_40BRES 0x3000000000000000ull +#define XCT_COPY_I 0x0800000000000000ull +#define XCT_COPY_O 0x0400000000000000ull +#define XCT_COPY_E 0x0200000000000000ull +#define XCT_COPY_STY_ZERO 0x01c0000000000000ull +#define XCT_COPY_DTY_PREF 0x0038000000000000ull +#define XCT_COPY_LLEN_M 0x0007ffff00000000ull +#define XCT_COPY_LLEN_S 32 +#define XCT_COPY_LLEN(x) ((((long)(x)) << XCT_COPY_LLEN_S) & \ + XCT_COPY_LLEN_M) +#define XCT_COPY_SE 0x0000000000000001ull + +/* Function descriptor fields */ +#define XCT_FUN_T 0x8000000000000000ull +#define XCT_FUN_ST 0x4000000000000000ull +#define XCT_FUN_RR_M 0x3000000000000000ull +#define XCT_FUN_RR_NORES 0x0000000000000000ull +#define XCT_FUN_RR_8BRES 0x1000000000000000ull +#define XCT_FUN_RR_24BRES 0x2000000000000000ull +#define XCT_FUN_RR_40BRES 0x3000000000000000ull +#define XCT_FUN_I 0x0800000000000000ull +#define XCT_FUN_O 0x0400000000000000ull +#define XCT_FUN_E 0x0200000000000000ull +#define XCT_FUN_FUN_M 0x01c0000000000000ull +#define XCT_FUN_FUN_S 54 +#define XCT_FUN_FUN(x) ((((long)(x)) << XCT_FUN_FUN_S) & XCT_FUN_FUN_M) +#define XCT_FUN_CRM_M 0x0038000000000000ull +#define XCT_FUN_CRM_NOP 0x0000000000000000ull +#define XCT_FUN_CRM_SIG 0x0008000000000000ull +#define XCT_FUN_LLEN_M 0x0007ffff00000000ull +#define XCT_FUN_LLEN_S 32 +#define XCT_FUN_LLEN(x) ((((long)(x)) << XCT_FUN_LLEN_S) & XCT_FUN_LLEN_M) +#define XCT_FUN_SHL_M 0x00000000f8000000ull +#define XCT_FUN_SHL_S 27 +#define XCT_FUN_SHL(x) ((((long)(x)) << XCT_FUN_SHL_S) & XCT_FUN_SHL_M) +#define XCT_FUN_CHL_M 0x0000000007c00000ull +#define XCT_FUN_HSZ_M 0x00000000003c0000ull +#define XCT_FUN_ALG_M 0x0000000000038000ull +#define XCT_FUN_HP 0x0000000000004000ull +#define XCT_FUN_BCM_M 0x0000000000003800ull +#define XCT_FUN_BCP_M 0x0000000000000600ull +#define XCT_FUN_SIG_M 0x00000000000001f0ull +#define XCT_FUN_SIG_TCP4 0x0000000000000140ull +#define XCT_FUN_SIG_TCP6 0x0000000000000150ull +#define XCT_FUN_SIG_UDP4 0x0000000000000160ull +#define XCT_FUN_SIG_UDP6 0x0000000000000170ull +#define XCT_FUN_A 0x0000000000000008ull +#define XCT_FUN_C 0x0000000000000004ull +#define XCT_FUN_AL2 0x0000000000000002ull +#define XCT_FUN_SE 0x0000000000000001ull + +/* Function descriptor 8byte result fields */ +#define XCT_FUNRES_8B_CS_M 0x0000ffff00000000ull +#define XCT_FUNRES_8B_CS_S 32 +#define XCT_FUNRES_8B_CRC_M 0x00000000ffffffffull +#define XCT_FUNRES_8B_CRC_S 0 + +/* Control descriptor fields */ +#define CTRL_CMD_T 0x8000000000000000ull +#define CTRL_CMD_META_EVT 0x2000000000000000ull +#define CTRL_CMD_O 0x0400000000000000ull +#define CTRL_CMD_ETYPE_M 0x0038000000000000ull +#define CTRL_CMD_ETYPE_EXT 0x0000000000000000ull +#define CTRL_CMD_ETYPE_WSET 0x0020000000000000ull +#define CTRL_CMD_ETYPE_WCLR 0x0028000000000000ull +#define CTRL_CMD_ETYPE_SET 0x0030000000000000ull +#define CTRL_CMD_ETYPE_CLR 0x0038000000000000ull +#define CTRL_CMD_REG_M 0x000000000000007full +#define CTRL_CMD_REG_S 0 +#define CTRL_CMD_REG(x) ((((long)(x)) << CTRL_CMD_REG_S) & \ + CTRL_CMD_REG_M) + + + +/* Prototypes for the shared DMA functions in the platform code. */ + +/* DMA TX Channel type. Right now only limitations used are event types 0/1, + * for event-triggered DMA transactions. + */ + +enum pasemi_dmachan_type { + RXCHAN = 0, /* Any RX chan */ + TXCHAN = 1, /* Any TX chan */ + TXCHAN_EVT0 = 0x1001, /* TX chan in event class 0 (chan 0-9) */ + TXCHAN_EVT1 = 0x2001, /* TX chan in event class 1 (chan 10-19) */ +}; + +struct pasemi_dmachan { + int chno; /* Channel number */ + enum pasemi_dmachan_type chan_type; /* TX / RX */ + u64 *status; /* Ptr to cacheable status */ + int irq; /* IRQ used by channel */ + unsigned int ring_size; /* size of allocated ring */ + dma_addr_t ring_dma; /* DMA address for ring */ + u64 *ring_virt; /* Virt address for ring */ + void *priv; /* Ptr to start of client struct */ +}; + +/* Read/write the different registers in the I/O Bridge, Ethernet + * and DMA Controller + */ +extern unsigned int pasemi_read_iob_reg(unsigned int reg); +extern void pasemi_write_iob_reg(unsigned int reg, unsigned int val); + +extern unsigned int pasemi_read_mac_reg(int intf, unsigned int reg); +extern void pasemi_write_mac_reg(int intf, unsigned int reg, unsigned int val); + +extern unsigned int pasemi_read_dma_reg(unsigned int reg); +extern void pasemi_write_dma_reg(unsigned int reg, unsigned int val); + +/* Channel management routines */ + +extern void *pasemi_dma_alloc_chan(enum pasemi_dmachan_type type, + int total_size, int offset); +extern void pasemi_dma_free_chan(struct pasemi_dmachan *chan); + +extern void pasemi_dma_start_chan(const struct pasemi_dmachan *chan, + const u32 cmdsta); +extern int pasemi_dma_stop_chan(const struct pasemi_dmachan *chan); + +/* Common routines to allocate rings and buffers */ + +extern int pasemi_dma_alloc_ring(struct pasemi_dmachan *chan, int ring_size); +extern void pasemi_dma_free_ring(struct pasemi_dmachan *chan); + +extern void *pasemi_dma_alloc_buf(struct pasemi_dmachan *chan, int size, + dma_addr_t *handle); +extern void pasemi_dma_free_buf(struct pasemi_dmachan *chan, int size, + dma_addr_t *handle); + +/* Routines to allocate flags (events) for channel syncronization */ +extern int pasemi_dma_alloc_flag(void); +extern void pasemi_dma_free_flag(int flag); +extern void pasemi_dma_set_flag(int flag); +extern void pasemi_dma_clear_flag(int flag); + +/* Routines to allocate function engines */ +extern int pasemi_dma_alloc_fun(void); +extern void pasemi_dma_free_fun(int fun); + +/* Initialize the library, must be called before any other functions */ +extern int pasemi_dma_init(void); + +#endif /* ASM_PASEMI_DMA_H */ diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h new file mode 100644 index 00000000000..ae2ea803a0f --- /dev/null +++ b/arch/powerpc/include/asm/pci-bridge.h @@ -0,0 +1,302 @@ +#ifndef _ASM_POWERPC_PCI_BRIDGE_H +#define _ASM_POWERPC_PCI_BRIDGE_H +#ifdef __KERNEL__ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include +#include +#include + +struct device_node; + +extern unsigned int ppc_pci_flags; +enum { + /* Force re-assigning all resources (ignore firmware + * setup completely) + */ + PPC_PCI_REASSIGN_ALL_RSRC = 0x00000001, + + /* Re-assign all bus numbers */ + PPC_PCI_REASSIGN_ALL_BUS = 0x00000002, + + /* Do not try to assign, just use existing setup */ + PPC_PCI_PROBE_ONLY = 0x00000004, + + /* Don't bother with ISA alignment unless the bridge has + * ISA forwarding enabled + */ + PPC_PCI_CAN_SKIP_ISA_ALIGN = 0x00000008, + + /* Enable domain numbers in /proc */ + PPC_PCI_ENABLE_PROC_DOMAINS = 0x00000010, + /* ... except for domain 0 */ + PPC_PCI_COMPAT_DOMAIN_0 = 0x00000020, +}; + + +/* + * Structure of a PCI controller (host bridge) + */ +struct pci_controller { + struct pci_bus *bus; + char is_dynamic; +#ifdef CONFIG_PPC64 + int node; +#endif + struct device_node *dn; + struct list_head list_node; + struct device *parent; + + int first_busno; + int last_busno; +#ifndef CONFIG_PPC64 + int self_busno; +#endif + + void __iomem *io_base_virt; +#ifdef CONFIG_PPC64 + void *io_base_alloc; +#endif + resource_size_t io_base_phys; +#ifndef CONFIG_PPC64 + resource_size_t pci_io_size; +#endif + + /* Some machines (PReP) have a non 1:1 mapping of + * the PCI memory space in the CPU bus space + */ + resource_size_t pci_mem_offset; +#ifdef CONFIG_PPC64 + unsigned long pci_io_size; +#endif + + struct pci_ops *ops; + unsigned int __iomem *cfg_addr; + void __iomem *cfg_data; + +#ifndef CONFIG_PPC64 + /* + * Used for variants of PCI indirect handling and possible quirks: + * SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1 + * EXT_REG - provides access to PCI-e extended registers + * SURPRESS_PRIMARY_BUS - we surpress the setting of PCI_PRIMARY_BUS + * on Freescale PCI-e controllers since they used the PCI_PRIMARY_BUS + * to determine which bus number to match on when generating type0 + * config cycles + * NO_PCIE_LINK - the Freescale PCI-e controllers have issues with + * hanging if we don't have link and try to do config cycles to + * anything but the PHB. Only allow talking to the PHB if this is + * set. + * BIG_ENDIAN - cfg_addr is a big endian register + * BROKEN_MRM - the 440EPx/GRx chips have an errata that causes hangs on + * the PLB4. Effectively disable MRM commands by setting this. + */ +#define PPC_INDIRECT_TYPE_SET_CFG_TYPE 0x00000001 +#define PPC_INDIRECT_TYPE_EXT_REG 0x00000002 +#define PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS 0x00000004 +#define PPC_INDIRECT_TYPE_NO_PCIE_LINK 0x00000008 +#define PPC_INDIRECT_TYPE_BIG_ENDIAN 0x00000010 +#define PPC_INDIRECT_TYPE_BROKEN_MRM 0x00000020 + u32 indirect_type; +#endif /* !CONFIG_PPC64 */ + /* Currently, we limit ourselves to 1 IO range and 3 mem + * ranges since the common pci_bus structure can't handle more + */ + struct resource io_resource; + struct resource mem_resources[3]; + int global_number; /* PCI domain number */ +#ifdef CONFIG_PPC64 + unsigned long buid; + unsigned long dma_window_base_cur; + unsigned long dma_window_size; + + void *private_data; +#endif /* CONFIG_PPC64 */ +}; + +#ifndef CONFIG_PPC64 + +static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus) +{ + return bus->sysdata; +} + +static inline int isa_vaddr_is_ioport(void __iomem *address) +{ + /* No specific ISA handling on ppc32 at this stage, it + * all goes through PCI + */ + return 0; +} + +/* These are used for config access before all the PCI probing + has been done. */ +extern int early_read_config_byte(struct pci_controller *hose, int bus, + int dev_fn, int where, u8 *val); +extern int early_read_config_word(struct pci_controller *hose, int bus, + int dev_fn, int where, u16 *val); +extern int early_read_config_dword(struct pci_controller *hose, int bus, + int dev_fn, int where, u32 *val); +extern int early_write_config_byte(struct pci_controller *hose, int bus, + int dev_fn, int where, u8 val); +extern int early_write_config_word(struct pci_controller *hose, int bus, + int dev_fn, int where, u16 val); +extern int early_write_config_dword(struct pci_controller *hose, int bus, + int dev_fn, int where, u32 val); + +extern int early_find_capability(struct pci_controller *hose, int bus, + int dev_fn, int cap); + +extern void setup_indirect_pci(struct pci_controller* hose, + resource_size_t cfg_addr, + resource_size_t cfg_data, u32 flags); +extern void setup_grackle(struct pci_controller *hose); +#else /* CONFIG_PPC64 */ + +/* + * PCI stuff, for nodes representing PCI devices, pointed to + * by device_node->data. + */ +struct iommu_table; + +struct pci_dn { + int busno; /* pci bus number */ + int devfn; /* pci device and function number */ + + struct pci_controller *phb; /* for pci devices */ + struct iommu_table *iommu_table; /* for phb's or bridges */ + struct device_node *node; /* back-pointer to the device_node */ + + int pci_ext_config_space; /* for pci devices */ + +#ifdef CONFIG_EEH + struct pci_dev *pcidev; /* back-pointer to the pci device */ + int class_code; /* pci device class */ + int eeh_mode; /* See eeh.h for possible EEH_MODEs */ + int eeh_config_addr; + int eeh_pe_config_addr; /* new-style partition endpoint address */ + int eeh_check_count; /* # times driver ignored error */ + int eeh_freeze_count; /* # times this device froze up. */ + int eeh_false_positives; /* # times this device reported #ff's */ + u32 config_space[16]; /* saved PCI config space */ +#endif +}; + +/* Get the pointer to a device_node's pci_dn */ +#define PCI_DN(dn) ((struct pci_dn *) (dn)->data) + +extern struct device_node *fetch_dev_dn(struct pci_dev *dev); + +/* Get a device_node from a pci_dev. This code must be fast except + * in the case where the sysdata is incorrect and needs to be fixed + * up (this will only happen once). + * In this case the sysdata will have been inherited from a PCI host + * bridge or a PCI-PCI bridge further up the tree, so it will point + * to a valid struct pci_dn, just not the one we want. + */ +static inline struct device_node *pci_device_to_OF_node(struct pci_dev *dev) +{ + struct device_node *dn = dev->sysdata; + struct pci_dn *pdn = dn->data; + + if (pdn && pdn->devfn == dev->devfn && pdn->busno == dev->bus->number) + return dn; /* fast path. sysdata is good */ + return fetch_dev_dn(dev); +} + +static inline int pci_device_from_OF_node(struct device_node *np, + u8 *bus, u8 *devfn) +{ + if (!PCI_DN(np)) + return -ENODEV; + *bus = PCI_DN(np)->busno; + *devfn = PCI_DN(np)->devfn; + return 0; +} + +static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus) +{ + if (bus->self) + return pci_device_to_OF_node(bus->self); + else + return bus->sysdata; /* Must be root bus (PHB) */ +} + +/** Find the bus corresponding to the indicated device node */ +extern struct pci_bus *pcibios_find_pci_bus(struct device_node *dn); + +/** Remove all of the PCI devices under this bus */ +extern void pcibios_remove_pci_devices(struct pci_bus *bus); + +/** Discover new pci devices under this bus, and add them */ +extern void pcibios_add_pci_devices(struct pci_bus *bus); +extern void pcibios_fixup_new_pci_devices(struct pci_bus *bus); + +extern int pcibios_remove_root_bus(struct pci_controller *phb); + +static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus) +{ + struct device_node *busdn = bus->sysdata; + + BUG_ON(busdn == NULL); + return PCI_DN(busdn)->phb; +} + + +extern void isa_bridge_find_early(struct pci_controller *hose); + +static inline int isa_vaddr_is_ioport(void __iomem *address) +{ + /* Check if address hits the reserved legacy IO range */ + unsigned long ea = (unsigned long)address; + return ea >= ISA_IO_BASE && ea < ISA_IO_END; +} + +extern int pcibios_unmap_io_space(struct pci_bus *bus); +extern int pcibios_map_io_space(struct pci_bus *bus); + +/* Return values for ppc_md.pci_probe_mode function */ +#define PCI_PROBE_NONE -1 /* Don't look at this bus at all */ +#define PCI_PROBE_NORMAL 0 /* Do normal PCI probing */ +#define PCI_PROBE_DEVTREE 1 /* Instantiate from device tree */ + +#ifdef CONFIG_NUMA +#define PHB_SET_NODE(PHB, NODE) ((PHB)->node = (NODE)) +#else +#define PHB_SET_NODE(PHB, NODE) ((PHB)->node = -1) +#endif + +#endif /* CONFIG_PPC64 */ + +/* Get the PCI host controller for an OF device */ +extern struct pci_controller *pci_find_hose_for_OF_device( + struct device_node* node); + +/* Fill up host controller resources from the OF node */ +extern void pci_process_bridge_OF_ranges(struct pci_controller *hose, + struct device_node *dev, int primary); + +/* Allocate & free a PCI host bridge structure */ +extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev); +extern void pcibios_free_controller(struct pci_controller *phb); + +#ifdef CONFIG_PCI +extern unsigned long pci_address_to_pio(phys_addr_t address); +extern int pcibios_vaddr_is_ioport(void __iomem *address); +#else +static inline unsigned long pci_address_to_pio(phys_addr_t address) +{ + return (unsigned long)-1; +} +static inline int pcibios_vaddr_is_ioport(void __iomem *address) +{ + return 0; +} +#endif /* CONFIG_PCI */ + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_PCI_BRIDGE_H */ diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h new file mode 100644 index 00000000000..a05a942b1c2 --- /dev/null +++ b/arch/powerpc/include/asm/pci.h @@ -0,0 +1,228 @@ +#ifndef __ASM_POWERPC_PCI_H +#define __ASM_POWERPC_PCI_H +#ifdef __KERNEL__ + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include + +#define PCIBIOS_MIN_IO 0x1000 +#define PCIBIOS_MIN_MEM 0x10000000 + +struct pci_dev; + +/* Values for the `which' argument to sys_pciconfig_iobase syscall. */ +#define IOBASE_BRIDGE_NUMBER 0 +#define IOBASE_MEMORY 1 +#define IOBASE_IO 2 +#define IOBASE_ISA_IO 3 +#define IOBASE_ISA_MEM 4 + +/* + * Set this to 1 if you want the kernel to re-assign all PCI + * bus numbers (don't do that on ppc64 yet !) + */ +#define pcibios_assign_all_busses() (ppc_pci_flags & \ + PPC_PCI_REASSIGN_ALL_BUS) +#define pcibios_scan_all_fns(a, b) 0 + +static inline void pcibios_set_master(struct pci_dev *dev) +{ + /* No special bus mastering setup handling */ +} + +static inline void pcibios_penalize_isa_irq(int irq, int active) +{ + /* We don't do dynamic PCI IRQ allocation */ +} + +#define HAVE_ARCH_PCI_GET_LEGACY_IDE_IRQ +static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) +{ + if (ppc_md.pci_get_legacy_ide_irq) + return ppc_md.pci_get_legacy_ide_irq(dev, channel); + return channel ? 15 : 14; +} + +#ifdef CONFIG_PPC64 + +/* + * We want to avoid touching the cacheline size or MWI bit. + * pSeries firmware sets the cacheline size (which is not the cpu cacheline + * size in all cases) and hardware treats MWI the same as memory write. + */ +#define PCI_DISABLE_MWI + +#ifdef CONFIG_PCI +extern void set_pci_dma_ops(struct dma_mapping_ops *dma_ops); +extern struct dma_mapping_ops *get_pci_dma_ops(void); + +static inline void pci_dma_burst_advice(struct pci_dev *pdev, + enum pci_dma_burst_strategy *strat, + unsigned long *strategy_parameter) +{ + unsigned long cacheline_size; + u8 byte; + + pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte); + if (byte == 0) + cacheline_size = 1024; + else + cacheline_size = (int) byte * 4; + + *strat = PCI_DMA_BURST_MULTIPLE; + *strategy_parameter = cacheline_size; +} +#else /* CONFIG_PCI */ +#define set_pci_dma_ops(d) +#define get_pci_dma_ops() NULL +#endif + +#else /* 32-bit */ + +#ifdef CONFIG_PCI +static inline void pci_dma_burst_advice(struct pci_dev *pdev, + enum pci_dma_burst_strategy *strat, + unsigned long *strategy_parameter) +{ + *strat = PCI_DMA_BURST_INFINITY; + *strategy_parameter = ~0UL; +} +#endif +#endif /* CONFIG_PPC64 */ + +extern int pci_domain_nr(struct pci_bus *bus); + +/* Decide whether to display the domain number in /proc */ +extern int pci_proc_domain(struct pci_bus *bus); + + +struct vm_area_struct; +/* Map a range of PCI memory or I/O space for a device into user space */ +int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state, int write_combine); + +/* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */ +#define HAVE_PCI_MMAP 1 + +#if defined(CONFIG_PPC64) || defined(CONFIG_NOT_COHERENT_CACHE) +/* + * For 64-bit kernels, pci_unmap_{single,page} is not a nop. + * For 32-bit non-coherent kernels, pci_dma_sync_single_for_cpu() and + * so on are not nops. + * and thus... + */ +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \ + dma_addr_t ADDR_NAME; +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \ + __u32 LEN_NAME; +#define pci_unmap_addr(PTR, ADDR_NAME) \ + ((PTR)->ADDR_NAME) +#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \ + (((PTR)->ADDR_NAME) = (VAL)) +#define pci_unmap_len(PTR, LEN_NAME) \ + ((PTR)->LEN_NAME) +#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \ + (((PTR)->LEN_NAME) = (VAL)) + +#else /* 32-bit && coherent */ + +/* pci_unmap_{page,single} is a nop so... */ +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) +#define pci_unmap_addr(PTR, ADDR_NAME) (0) +#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0) +#define pci_unmap_len(PTR, LEN_NAME) (0) +#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) + +#endif /* CONFIG_PPC64 || CONFIG_NOT_COHERENT_CACHE */ + +#ifdef CONFIG_PPC64 + +/* The PCI address space does not equal the physical memory address + * space (we have an IOMMU). The IDE and SCSI device layers use + * this boolean for bounce buffer decisions. + */ +#define PCI_DMA_BUS_IS_PHYS (0) + +#else /* 32-bit */ + +/* The PCI address space does equal the physical memory + * address space (no IOMMU). The IDE and SCSI device layers use + * this boolean for bounce buffer decisions. + */ +#define PCI_DMA_BUS_IS_PHYS (1) + +#endif /* CONFIG_PPC64 */ + +extern void pcibios_resource_to_bus(struct pci_dev *dev, + struct pci_bus_region *region, + struct resource *res); + +extern void pcibios_bus_to_resource(struct pci_dev *dev, + struct resource *res, + struct pci_bus_region *region); + +static inline struct resource *pcibios_select_root(struct pci_dev *pdev, + struct resource *res) +{ + struct resource *root = NULL; + + if (res->flags & IORESOURCE_IO) + root = &ioport_resource; + if (res->flags & IORESOURCE_MEM) + root = &iomem_resource; + + return root; +} + +extern void pcibios_setup_new_device(struct pci_dev *dev); + +extern void pcibios_claim_one_bus(struct pci_bus *b); + +extern void pcibios_resource_survey(void); + +extern struct pci_controller *init_phb_dynamic(struct device_node *dn); + +extern struct pci_dev *of_create_pci_dev(struct device_node *node, + struct pci_bus *bus, int devfn); + +extern void of_scan_pci_bridge(struct device_node *node, + struct pci_dev *dev); + +extern void of_scan_bus(struct device_node *node, struct pci_bus *bus); + +extern int pci_read_irq_line(struct pci_dev *dev); + +struct file; +extern pgprot_t pci_phys_mem_access_prot(struct file *file, + unsigned long pfn, + unsigned long size, + pgprot_t prot); + +#define HAVE_ARCH_PCI_RESOURCE_TO_USER +extern void pci_resource_to_user(const struct pci_dev *dev, int bar, + const struct resource *rsrc, + resource_size_t *start, resource_size_t *end); + +extern void pcibios_do_bus_setup(struct pci_bus *bus); +extern void pcibios_fixup_of_probed_bus(struct pci_bus *bus); + +#endif /* __KERNEL__ */ +#endif /* __ASM_POWERPC_PCI_H */ diff --git a/arch/powerpc/include/asm/percpu.h b/arch/powerpc/include/asm/percpu.h new file mode 100644 index 00000000000..f879252b7ea --- /dev/null +++ b/arch/powerpc/include/asm/percpu.h @@ -0,0 +1,24 @@ +#ifndef _ASM_POWERPC_PERCPU_H_ +#define _ASM_POWERPC_PERCPU_H_ +#ifdef __powerpc64__ +#include + +/* + * Same as asm-generic/percpu.h, except that we store the per cpu offset + * in the paca. Based on the x86-64 implementation. + */ + +#ifdef CONFIG_SMP + +#include + +#define __per_cpu_offset(cpu) (paca[cpu].data_offset) +#define __my_cpu_offset local_paca->data_offset +#define per_cpu_offset(x) (__per_cpu_offset(x)) + +#endif /* CONFIG_SMP */ +#endif /* __powerpc64__ */ + +#include + +#endif /* _ASM_POWERPC_PERCPU_H_ */ diff --git a/arch/powerpc/include/asm/pgalloc-32.h b/arch/powerpc/include/asm/pgalloc-32.h new file mode 100644 index 00000000000..58c07147b3e --- /dev/null +++ b/arch/powerpc/include/asm/pgalloc-32.h @@ -0,0 +1,43 @@ +#ifndef _ASM_POWERPC_PGALLOC_32_H +#define _ASM_POWERPC_PGALLOC_32_H + +#include + +extern void __bad_pte(pmd_t *pmd); + +extern pgd_t *pgd_alloc(struct mm_struct *mm); +extern void pgd_free(struct mm_struct *mm, pgd_t *pgd); + +/* + * We don't have any real pmd's, and this code never triggers because + * the pgd will always be present.. + */ +/* #define pmd_alloc_one(mm,address) ({ BUG(); ((pmd_t *)2); }) */ +#define pmd_free(mm, x) do { } while (0) +#define __pmd_free_tlb(tlb,x) do { } while (0) +/* #define pgd_populate(mm, pmd, pte) BUG() */ + +#ifndef CONFIG_BOOKE +#define pmd_populate_kernel(mm, pmd, pte) \ + (pmd_val(*(pmd)) = __pa(pte) | _PMD_PRESENT) +#define pmd_populate(mm, pmd, pte) \ + (pmd_val(*(pmd)) = (page_to_pfn(pte) << PAGE_SHIFT) | _PMD_PRESENT) +#define pmd_pgtable(pmd) pmd_page(pmd) +#else +#define pmd_populate_kernel(mm, pmd, pte) \ + (pmd_val(*(pmd)) = (unsigned long)pte | _PMD_PRESENT) +#define pmd_populate(mm, pmd, pte) \ + (pmd_val(*(pmd)) = (unsigned long)lowmem_page_address(pte) | _PMD_PRESENT) +#define pmd_pgtable(pmd) pmd_page(pmd) +#endif + +extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr); +extern pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long addr); +extern void pte_free_kernel(struct mm_struct *mm, pte_t *pte); +extern void pte_free(struct mm_struct *mm, pgtable_t pte); + +#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, (pte)) + +#define check_pgt_cache() do { } while (0) + +#endif /* _ASM_POWERPC_PGALLOC_32_H */ diff --git a/arch/powerpc/include/asm/pgalloc-64.h b/arch/powerpc/include/asm/pgalloc-64.h new file mode 100644 index 00000000000..812a1d8f35c --- /dev/null +++ b/arch/powerpc/include/asm/pgalloc-64.h @@ -0,0 +1,166 @@ +#ifndef _ASM_POWERPC_PGALLOC_64_H +#define _ASM_POWERPC_PGALLOC_64_H +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include + +#ifndef CONFIG_PPC_SUBPAGE_PROT +static inline void subpage_prot_free(pgd_t *pgd) {} +#endif + +extern struct kmem_cache *pgtable_cache[]; + +#define PGD_CACHE_NUM 0 +#define PUD_CACHE_NUM 1 +#define PMD_CACHE_NUM 1 +#define HUGEPTE_CACHE_NUM 2 +#define PTE_NONCACHE_NUM 7 /* from GFP rather than kmem_cache */ + +static inline pgd_t *pgd_alloc(struct mm_struct *mm) +{ + return kmem_cache_alloc(pgtable_cache[PGD_CACHE_NUM], GFP_KERNEL); +} + +static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) +{ + subpage_prot_free(pgd); + kmem_cache_free(pgtable_cache[PGD_CACHE_NUM], pgd); +} + +#ifndef CONFIG_PPC_64K_PAGES + +#define pgd_populate(MM, PGD, PUD) pgd_set(PGD, PUD) + +static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr) +{ + return kmem_cache_alloc(pgtable_cache[PUD_CACHE_NUM], + GFP_KERNEL|__GFP_REPEAT); +} + +static inline void pud_free(struct mm_struct *mm, pud_t *pud) +{ + kmem_cache_free(pgtable_cache[PUD_CACHE_NUM], pud); +} + +static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd) +{ + pud_set(pud, (unsigned long)pmd); +} + +#define pmd_populate(mm, pmd, pte_page) \ + pmd_populate_kernel(mm, pmd, page_address(pte_page)) +#define pmd_populate_kernel(mm, pmd, pte) pmd_set(pmd, (unsigned long)(pte)) +#define pmd_pgtable(pmd) pmd_page(pmd) + + +#else /* CONFIG_PPC_64K_PAGES */ + +#define pud_populate(mm, pud, pmd) pud_set(pud, (unsigned long)pmd) + +static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, + pte_t *pte) +{ + pmd_set(pmd, (unsigned long)pte); +} + +#define pmd_populate(mm, pmd, pte_page) \ + pmd_populate_kernel(mm, pmd, page_address(pte_page)) +#define pmd_pgtable(pmd) pmd_page(pmd) + +#endif /* CONFIG_PPC_64K_PAGES */ + +static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr) +{ + return kmem_cache_alloc(pgtable_cache[PMD_CACHE_NUM], + GFP_KERNEL|__GFP_REPEAT); +} + +static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd) +{ + kmem_cache_free(pgtable_cache[PMD_CACHE_NUM], pmd); +} + +static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, + unsigned long address) +{ + return (pte_t *)__get_free_page(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO); +} + +static inline pgtable_t pte_alloc_one(struct mm_struct *mm, + unsigned long address) +{ + struct page *page; + pte_t *pte; + + pte = pte_alloc_one_kernel(mm, address); + if (!pte) + return NULL; + page = virt_to_page(pte); + pgtable_page_ctor(page); + return page; +} + +static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) +{ + free_page((unsigned long)pte); +} + +static inline void pte_free(struct mm_struct *mm, pgtable_t ptepage) +{ + pgtable_page_dtor(ptepage); + __free_page(ptepage); +} + +#define PGF_CACHENUM_MASK 0x7 + +typedef struct pgtable_free { + unsigned long val; +} pgtable_free_t; + +static inline pgtable_free_t pgtable_free_cache(void *p, int cachenum, + unsigned long mask) +{ + BUG_ON(cachenum > PGF_CACHENUM_MASK); + + return (pgtable_free_t){.val = ((unsigned long) p & ~mask) | cachenum}; +} + +static inline void pgtable_free(pgtable_free_t pgf) +{ + void *p = (void *)(pgf.val & ~PGF_CACHENUM_MASK); + int cachenum = pgf.val & PGF_CACHENUM_MASK; + + if (cachenum == PTE_NONCACHE_NUM) + free_page((unsigned long)p); + else + kmem_cache_free(pgtable_cache[cachenum], p); +} + +extern void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf); + +#define __pte_free_tlb(tlb,ptepage) \ +do { \ + pgtable_page_dtor(ptepage); \ + pgtable_free_tlb(tlb, pgtable_free_cache(page_address(ptepage), \ + PTE_NONCACHE_NUM, PTE_TABLE_SIZE-1)); \ +} while (0) +#define __pmd_free_tlb(tlb, pmd) \ + pgtable_free_tlb(tlb, pgtable_free_cache(pmd, \ + PMD_CACHE_NUM, PMD_TABLE_SIZE-1)) +#ifndef CONFIG_PPC_64K_PAGES +#define __pud_free_tlb(tlb, pud) \ + pgtable_free_tlb(tlb, pgtable_free_cache(pud, \ + PUD_CACHE_NUM, PUD_TABLE_SIZE-1)) +#endif /* CONFIG_PPC_64K_PAGES */ + +#define check_pgt_cache() do { } while (0) + +#endif /* _ASM_POWERPC_PGALLOC_64_H */ diff --git a/arch/powerpc/include/asm/pgalloc.h b/arch/powerpc/include/asm/pgalloc.h new file mode 100644 index 00000000000..b4505ed0f0f --- /dev/null +++ b/arch/powerpc/include/asm/pgalloc.h @@ -0,0 +1,12 @@ +#ifndef _ASM_POWERPC_PGALLOC_H +#define _ASM_POWERPC_PGALLOC_H +#ifdef __KERNEL__ + +#ifdef CONFIG_PPC64 +#include +#else +#include +#endif + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_PGALLOC_H */ diff --git a/arch/powerpc/include/asm/pgtable-4k.h b/arch/powerpc/include/asm/pgtable-4k.h new file mode 100644 index 00000000000..6b18ba9d2d8 --- /dev/null +++ b/arch/powerpc/include/asm/pgtable-4k.h @@ -0,0 +1,117 @@ +#ifndef _ASM_POWERPC_PGTABLE_4K_H +#define _ASM_POWERPC_PGTABLE_4K_H +/* + * Entries per page directory level. The PTE level must use a 64b record + * for each page table entry. The PMD and PGD level use a 32b record for + * each entry by assuming that each entry is page aligned. + */ +#define PTE_INDEX_SIZE 9 +#define PMD_INDEX_SIZE 7 +#define PUD_INDEX_SIZE 7 +#define PGD_INDEX_SIZE 9 + +#ifndef __ASSEMBLY__ +#define PTE_TABLE_SIZE (sizeof(pte_t) << PTE_INDEX_SIZE) +#define PMD_TABLE_SIZE (sizeof(pmd_t) << PMD_INDEX_SIZE) +#define PUD_TABLE_SIZE (sizeof(pud_t) << PUD_INDEX_SIZE) +#define PGD_TABLE_SIZE (sizeof(pgd_t) << PGD_INDEX_SIZE) +#endif /* __ASSEMBLY__ */ + +#define PTRS_PER_PTE (1 << PTE_INDEX_SIZE) +#define PTRS_PER_PMD (1 << PMD_INDEX_SIZE) +#define PTRS_PER_PUD (1 << PMD_INDEX_SIZE) +#define PTRS_PER_PGD (1 << PGD_INDEX_SIZE) + +/* PMD_SHIFT determines what a second-level page table entry can map */ +#define PMD_SHIFT (PAGE_SHIFT + PTE_INDEX_SIZE) +#define PMD_SIZE (1UL << PMD_SHIFT) +#define PMD_MASK (~(PMD_SIZE-1)) + +/* With 4k base page size, hugepage PTEs go at the PMD level */ +#define MIN_HUGEPTE_SHIFT PMD_SHIFT + +/* PUD_SHIFT determines what a third-level page table entry can map */ +#define PUD_SHIFT (PMD_SHIFT + PMD_INDEX_SIZE) +#define PUD_SIZE (1UL << PUD_SHIFT) +#define PUD_MASK (~(PUD_SIZE-1)) + +/* PGDIR_SHIFT determines what a fourth-level page table entry can map */ +#define PGDIR_SHIFT (PUD_SHIFT + PUD_INDEX_SIZE) +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE-1)) + +/* PTE bits */ +#define _PAGE_HASHPTE 0x0400 /* software: pte has an associated HPTE */ +#define _PAGE_SECONDARY 0x8000 /* software: HPTE is in secondary group */ +#define _PAGE_GROUP_IX 0x7000 /* software: HPTE index within group */ +#define _PAGE_F_SECOND _PAGE_SECONDARY +#define _PAGE_F_GIX _PAGE_GROUP_IX +#define _PAGE_SPECIAL 0x10000 /* software: special page */ +#define __HAVE_ARCH_PTE_SPECIAL + +/* PTE flags to conserve for HPTE identification */ +#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | \ + _PAGE_SECONDARY | _PAGE_GROUP_IX) + +/* There is no 4K PFN hack on 4K pages */ +#define _PAGE_4K_PFN 0 + +/* PAGE_MASK gives the right answer below, but only by accident */ +/* It should be preserving the high 48 bits and then specifically */ +/* preserving _PAGE_SECONDARY | _PAGE_GROUP_IX */ +#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | \ + _PAGE_HPTEFLAGS) + +/* Bits to mask out from a PMD to get to the PTE page */ +#define PMD_MASKED_BITS 0 +/* Bits to mask out from a PUD to get to the PMD page */ +#define PUD_MASKED_BITS 0 +/* Bits to mask out from a PGD to get to the PUD page */ +#define PGD_MASKED_BITS 0 + +/* shift to put page number into pte */ +#define PTE_RPN_SHIFT (17) + +#ifdef STRICT_MM_TYPECHECKS +#define __real_pte(e,p) ((real_pte_t){(e)}) +#define __rpte_to_pte(r) ((r).pte) +#else +#define __real_pte(e,p) (e) +#define __rpte_to_pte(r) (__pte(r)) +#endif +#define __rpte_to_hidx(r,index) (pte_val(__rpte_to_pte(r)) >> 12) + +#define pte_iterate_hashed_subpages(rpte, psize, va, index, shift) \ + do { \ + index = 0; \ + shift = mmu_psize_defs[psize].shift; \ + +#define pte_iterate_hashed_end() } while(0) + +#ifdef CONFIG_PPC_HAS_HASH_64K +#define pte_pagesize_index(mm, addr, pte) get_slice_psize(mm, addr) +#else +#define pte_pagesize_index(mm, addr, pte) MMU_PAGE_4K +#endif + +/* + * 4-level page tables related bits + */ + +#define pgd_none(pgd) (!pgd_val(pgd)) +#define pgd_bad(pgd) (pgd_val(pgd) == 0) +#define pgd_present(pgd) (pgd_val(pgd) != 0) +#define pgd_clear(pgdp) (pgd_val(*(pgdp)) = 0) +#define pgd_page_vaddr(pgd) (pgd_val(pgd) & ~PGD_MASKED_BITS) +#define pgd_page(pgd) virt_to_page(pgd_page_vaddr(pgd)) + +#define pud_offset(pgdp, addr) \ + (((pud_t *) pgd_page_vaddr(*(pgdp))) + \ + (((addr) >> PUD_SHIFT) & (PTRS_PER_PUD - 1))) + +#define pud_ERROR(e) \ + printk("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pud_val(e)) + +#define remap_4k_pfn(vma, addr, pfn, prot) \ + remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, (prot)) +#endif /* _ASM_POWERPC_PGTABLE_4K_H */ diff --git a/arch/powerpc/include/asm/pgtable-64k.h b/arch/powerpc/include/asm/pgtable-64k.h new file mode 100644 index 00000000000..07b0d8f09cb --- /dev/null +++ b/arch/powerpc/include/asm/pgtable-64k.h @@ -0,0 +1,155 @@ +#ifndef _ASM_POWERPC_PGTABLE_64K_H +#define _ASM_POWERPC_PGTABLE_64K_H + +#include + + +#define PTE_INDEX_SIZE 12 +#define PMD_INDEX_SIZE 12 +#define PUD_INDEX_SIZE 0 +#define PGD_INDEX_SIZE 4 + +#ifndef __ASSEMBLY__ +#define PTE_TABLE_SIZE (sizeof(real_pte_t) << PTE_INDEX_SIZE) +#define PMD_TABLE_SIZE (sizeof(pmd_t) << PMD_INDEX_SIZE) +#define PGD_TABLE_SIZE (sizeof(pgd_t) << PGD_INDEX_SIZE) + +#define PTRS_PER_PTE (1 << PTE_INDEX_SIZE) +#define PTRS_PER_PMD (1 << PMD_INDEX_SIZE) +#define PTRS_PER_PGD (1 << PGD_INDEX_SIZE) + +#ifdef CONFIG_PPC_SUBPAGE_PROT +/* + * For the sub-page protection option, we extend the PGD with one of + * these. Basically we have a 3-level tree, with the top level being + * the protptrs array. To optimize speed and memory consumption when + * only addresses < 4GB are being protected, pointers to the first + * four pages of sub-page protection words are stored in the low_prot + * array. + * Each page of sub-page protection words protects 1GB (4 bytes + * protects 64k). For the 3-level tree, each page of pointers then + * protects 8TB. + */ +struct subpage_prot_table { + unsigned long maxaddr; /* only addresses < this are protected */ + unsigned int **protptrs[2]; + unsigned int *low_prot[4]; +}; + +#undef PGD_TABLE_SIZE +#define PGD_TABLE_SIZE ((sizeof(pgd_t) << PGD_INDEX_SIZE) + \ + sizeof(struct subpage_prot_table)) + +#define SBP_L1_BITS (PAGE_SHIFT - 2) +#define SBP_L2_BITS (PAGE_SHIFT - 3) +#define SBP_L1_COUNT (1 << SBP_L1_BITS) +#define SBP_L2_COUNT (1 << SBP_L2_BITS) +#define SBP_L2_SHIFT (PAGE_SHIFT + SBP_L1_BITS) +#define SBP_L3_SHIFT (SBP_L2_SHIFT + SBP_L2_BITS) + +extern void subpage_prot_free(pgd_t *pgd); + +static inline struct subpage_prot_table *pgd_subpage_prot(pgd_t *pgd) +{ + return (struct subpage_prot_table *)(pgd + PTRS_PER_PGD); +} +#endif /* CONFIG_PPC_SUBPAGE_PROT */ +#endif /* __ASSEMBLY__ */ + +/* With 4k base page size, hugepage PTEs go at the PMD level */ +#define MIN_HUGEPTE_SHIFT PAGE_SHIFT + +/* PMD_SHIFT determines what a second-level page table entry can map */ +#define PMD_SHIFT (PAGE_SHIFT + PTE_INDEX_SIZE) +#define PMD_SIZE (1UL << PMD_SHIFT) +#define PMD_MASK (~(PMD_SIZE-1)) + +/* PGDIR_SHIFT determines what a third-level page table entry can map */ +#define PGDIR_SHIFT (PMD_SHIFT + PMD_INDEX_SIZE) +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE-1)) + +/* Additional PTE bits (don't change without checking asm in hash_low.S) */ +#define __HAVE_ARCH_PTE_SPECIAL +#define _PAGE_SPECIAL 0x00000400 /* software: special page */ +#define _PAGE_HPTE_SUB 0x0ffff000 /* combo only: sub pages HPTE bits */ +#define _PAGE_HPTE_SUB0 0x08000000 /* combo only: first sub page */ +#define _PAGE_COMBO 0x10000000 /* this is a combo 4k page */ +#define _PAGE_4K_PFN 0x20000000 /* PFN is for a single 4k page */ + +/* For 64K page, we don't have a separate _PAGE_HASHPTE bit. Instead, + * we set that to be the whole sub-bits mask. The C code will only + * test this, so a multi-bit mask will work. For combo pages, this + * is equivalent as effectively, the old _PAGE_HASHPTE was an OR of + * all the sub bits. For real 64k pages, we now have the assembly set + * _PAGE_HPTE_SUB0 in addition to setting the HIDX bits which overlap + * that mask. This is fine as long as the HIDX bits are never set on + * a PTE that isn't hashed, which is the case today. + * + * A little nit is for the huge page C code, which does the hashing + * in C, we need to provide which bit to use. + */ +#define _PAGE_HASHPTE _PAGE_HPTE_SUB + +/* Note the full page bits must be in the same location as for normal + * 4k pages as the same asssembly will be used to insert 64K pages + * wether the kernel has CONFIG_PPC_64K_PAGES or not + */ +#define _PAGE_F_SECOND 0x00008000 /* full page: hidx bits */ +#define _PAGE_F_GIX 0x00007000 /* full page: hidx bits */ + +/* PTE flags to conserve for HPTE identification */ +#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | _PAGE_COMBO) + +/* Shift to put page number into pte. + * + * That gives us a max RPN of 34 bits, which means a max of 50 bits + * of addressable physical space, or 46 bits for the special 4k PFNs. + */ +#define PTE_RPN_SHIFT (30) +#define PTE_RPN_MAX (1UL << (64 - PTE_RPN_SHIFT)) +#define PTE_RPN_MASK (~((1UL<> ((index)<<2)) & 0xf) : ((pte_val((r).pte) >> 12) & 0xf)) +#define __rpte_to_pte(r) ((r).pte) +#define __rpte_sub_valid(rpte, index) \ + (pte_val(rpte.pte) & (_PAGE_HPTE_SUB0 >> (index))) + + +/* Trick: we set __end to va + 64k, which happens works for + * a 16M page as well as we want only one iteration + */ +#define pte_iterate_hashed_subpages(rpte, psize, va, index, shift) \ + do { \ + unsigned long __end = va + PAGE_SIZE; \ + unsigned __split = (psize == MMU_PAGE_4K || \ + psize == MMU_PAGE_64K_AP); \ + shift = mmu_psize_defs[psize].shift; \ + for (index = 0; va < __end; index++, va += (1L << shift)) { \ + if (!__split || __rpte_sub_valid(rpte, index)) do { \ + +#define pte_iterate_hashed_end() } while(0); } } while(0) + +#define pte_pagesize_index(mm, addr, pte) \ + (((pte) & _PAGE_COMBO)? MMU_PAGE_4K: MMU_PAGE_64K) + +#define remap_4k_pfn(vma, addr, pfn, prot) \ + remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, \ + __pgprot(pgprot_val((prot)) | _PAGE_4K_PFN)) + +#endif /* _ASM_POWERPC_PGTABLE_64K_H */ diff --git a/arch/powerpc/include/asm/pgtable-ppc32.h b/arch/powerpc/include/asm/pgtable-ppc32.h new file mode 100644 index 00000000000..6fe39e32704 --- /dev/null +++ b/arch/powerpc/include/asm/pgtable-ppc32.h @@ -0,0 +1,802 @@ +#ifndef _ASM_POWERPC_PGTABLE_PPC32_H +#define _ASM_POWERPC_PGTABLE_PPC32_H + +#include + +#ifndef __ASSEMBLY__ +#include +#include +#include /* For sub-arch specific PPC_PIN_SIZE */ + +extern unsigned long va_to_phys(unsigned long address); +extern pte_t *va_to_pte(unsigned long address); +extern unsigned long ioremap_bot, ioremap_base; + +#ifdef CONFIG_44x +extern int icache_44x_need_flush; +#endif + +#endif /* __ASSEMBLY__ */ + +/* + * The PowerPC MMU uses a hash table containing PTEs, together with + * a set of 16 segment registers (on 32-bit implementations), to define + * the virtual to physical address mapping. + * + * We use the hash table as an extended TLB, i.e. a cache of currently + * active mappings. We maintain a two-level page table tree, much + * like that used by the i386, for the sake of the Linux memory + * management code. Low-level assembler code in hashtable.S + * (procedure hash_page) is responsible for extracting ptes from the + * tree and putting them into the hash table when necessary, and + * updating the accessed and modified bits in the page table tree. + */ + +/* + * The PowerPC MPC8xx uses a TLB with hardware assisted, software tablewalk. + * We also use the two level tables, but we can put the real bits in them + * needed for the TLB and tablewalk. These definitions require Mx_CTR.PPM = 0, + * Mx_CTR.PPCS = 0, and MD_CTR.TWAM = 1. The level 2 descriptor has + * additional page protection (when Mx_CTR.PPCS = 1) that allows TLB hit + * based upon user/super access. The TLB does not have accessed nor write + * protect. We assume that if the TLB get loaded with an entry it is + * accessed, and overload the changed bit for write protect. We use + * two bits in the software pte that are supposed to be set to zero in + * the TLB entry (24 and 25) for these indicators. Although the level 1 + * descriptor contains the guarded and writethrough/copyback bits, we can + * set these at the page level since they get copied from the Mx_TWC + * register when the TLB entry is loaded. We will use bit 27 for guard, since + * that is where it exists in the MD_TWC, and bit 26 for writethrough. + * These will get masked from the level 2 descriptor at TLB load time, and + * copied to the MD_TWC before it gets loaded. + * Large page sizes added. We currently support two sizes, 4K and 8M. + * This also allows a TLB hander optimization because we can directly + * load the PMD into MD_TWC. The 8M pages are only used for kernel + * mapping of well known areas. The PMD (PGD) entries contain control + * flags in addition to the address, so care must be taken that the + * software no longer assumes these are only pointers. + */ + +/* + * At present, all PowerPC 400-class processors share a similar TLB + * architecture. The instruction and data sides share a unified, + * 64-entry, fully-associative TLB which is maintained totally under + * software control. In addition, the instruction side has a + * hardware-managed, 4-entry, fully-associative TLB which serves as a + * first level to the shared TLB. These two TLBs are known as the UTLB + * and ITLB, respectively (see "mmu.h" for definitions). + */ + +/* + * The normal case is that PTEs are 32-bits and we have a 1-page + * 1024-entry pgdir pointing to 1-page 1024-entry PTE pages. -- paulus + * + * For any >32-bit physical address platform, we can use the following + * two level page table layout where the pgdir is 8KB and the MS 13 bits + * are an index to the second level table. The combined pgdir/pmd first + * level has 2048 entries and the second level has 512 64-bit PTE entries. + * -Matt + */ +/* PGDIR_SHIFT determines what a top-level page table entry can map */ +#define PGDIR_SHIFT (PAGE_SHIFT + PTE_SHIFT) +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE-1)) + +/* + * entries per page directory level: our page-table tree is two-level, so + * we don't really have any PMD directory. + */ +#ifndef __ASSEMBLY__ +#define PTE_TABLE_SIZE (sizeof(pte_t) << PTE_SHIFT) +#define PGD_TABLE_SIZE (sizeof(pgd_t) << (32 - PGDIR_SHIFT)) +#endif /* __ASSEMBLY__ */ + +#define PTRS_PER_PTE (1 << PTE_SHIFT) +#define PTRS_PER_PMD 1 +#define PTRS_PER_PGD (1 << (32 - PGDIR_SHIFT)) + +#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE) +#define FIRST_USER_ADDRESS 0 + +#define pte_ERROR(e) \ + printk("%s:%d: bad pte %llx.\n", __FILE__, __LINE__, \ + (unsigned long long)pte_val(e)) +#define pgd_ERROR(e) \ + printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) + +/* + * Just any arbitrary offset to the start of the vmalloc VM area: the + * current 64MB value just means that there will be a 64MB "hole" after the + * physical memory until the kernel virtual memory starts. That means that + * any out-of-bounds memory accesses will hopefully be caught. + * The vmalloc() routines leaves a hole of 4kB between each vmalloced + * area for the same reason. ;) + * + * We no longer map larger than phys RAM with the BATs so we don't have + * to worry about the VMALLOC_OFFSET causing problems. We do have to worry + * about clashes between our early calls to ioremap() that start growing down + * from ioremap_base being run into the VM area allocations (growing upwards + * from VMALLOC_START). For this reason we have ioremap_bot to check when + * we actually run into our mappings setup in the early boot with the VM + * system. This really does become a problem for machines with good amounts + * of RAM. -- Cort + */ +#define VMALLOC_OFFSET (0x1000000) /* 16M */ +#ifdef PPC_PIN_SIZE +#define VMALLOC_START (((_ALIGN((long)high_memory, PPC_PIN_SIZE) + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))) +#else +#define VMALLOC_START ((((long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))) +#endif +#define VMALLOC_END ioremap_bot + +/* + * Bits in a linux-style PTE. These match the bits in the + * (hardware-defined) PowerPC PTE as closely as possible. + */ + +#if defined(CONFIG_40x) + +/* There are several potential gotchas here. The 40x hardware TLBLO + field looks like this: + + 0 1 2 3 4 ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31 + RPN..................... 0 0 EX WR ZSEL....... W I M G + + Where possible we make the Linux PTE bits match up with this + + - bits 20 and 21 must be cleared, because we use 4k pages (40x can + support down to 1k pages), this is done in the TLBMiss exception + handler. + - We use only zones 0 (for kernel pages) and 1 (for user pages) + of the 16 available. Bit 24-26 of the TLB are cleared in the TLB + miss handler. Bit 27 is PAGE_USER, thus selecting the correct + zone. + - PRESENT *must* be in the bottom two bits because swap cache + entries use the top 30 bits. Because 40x doesn't support SMP + anyway, M is irrelevant so we borrow it for PAGE_PRESENT. Bit 30 + is cleared in the TLB miss handler before the TLB entry is loaded. + - All other bits of the PTE are loaded into TLBLO without + modification, leaving us only the bits 20, 21, 24, 25, 26, 30 for + software PTE bits. We actually use use bits 21, 24, 25, and + 30 respectively for the software bits: ACCESSED, DIRTY, RW, and + PRESENT. +*/ + +/* Definitions for 40x embedded chips. */ +#define _PAGE_GUARDED 0x001 /* G: page is guarded from prefetch */ +#define _PAGE_FILE 0x001 /* when !present: nonlinear file mapping */ +#define _PAGE_PRESENT 0x002 /* software: PTE contains a translation */ +#define _PAGE_NO_CACHE 0x004 /* I: caching is inhibited */ +#define _PAGE_WRITETHRU 0x008 /* W: caching is write-through */ +#define _PAGE_USER 0x010 /* matches one of the zone permission bits */ +#define _PAGE_RW 0x040 /* software: Writes permitted */ +#define _PAGE_DIRTY 0x080 /* software: dirty page */ +#define _PAGE_HWWRITE 0x100 /* hardware: Dirty & RW, set in exception */ +#define _PAGE_HWEXEC 0x200 /* hardware: EX permission */ +#define _PAGE_ACCESSED 0x400 /* software: R: page referenced */ + +#define _PMD_PRESENT 0x400 /* PMD points to page of PTEs */ +#define _PMD_BAD 0x802 +#define _PMD_SIZE 0x0e0 /* size field, != 0 for large-page PMD entry */ +#define _PMD_SIZE_4M 0x0c0 +#define _PMD_SIZE_16M 0x0e0 +#define PMD_PAGE_SIZE(pmdval) (1024 << (((pmdval) & _PMD_SIZE) >> 4)) + +/* Until my rework is finished, 40x still needs atomic PTE updates */ +#define PTE_ATOMIC_UPDATES 1 + +#elif defined(CONFIG_44x) +/* + * Definitions for PPC440 + * + * Because of the 3 word TLB entries to support 36-bit addressing, + * the attribute are difficult to map in such a fashion that they + * are easily loaded during exception processing. I decided to + * organize the entry so the ERPN is the only portion in the + * upper word of the PTE and the attribute bits below are packed + * in as sensibly as they can be in the area below a 4KB page size + * oriented RPN. This at least makes it easy to load the RPN and + * ERPN fields in the TLB. -Matt + * + * Note that these bits preclude future use of a page size + * less than 4KB. + * + * + * PPC 440 core has following TLB attribute fields; + * + * TLB1: + * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 + * RPN................................. - - - - - - ERPN....... + * + * TLB2: + * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 + * - - - - - - U0 U1 U2 U3 W I M G E - UX UW UR SX SW SR + * + * Newer 440 cores (440x6 as used on AMCC 460EX/460GT) have additional + * TLB2 storage attibute fields. Those are: + * + * TLB2: + * 0...10 11 12 13 14 15 16...31 + * no change WL1 IL1I IL1D IL2I IL2D no change + * + * There are some constrains and options, to decide mapping software bits + * into TLB entry. + * + * - PRESENT *must* be in the bottom three bits because swap cache + * entries use the top 29 bits for TLB2. + * + * - FILE *must* be in the bottom three bits because swap cache + * entries use the top 29 bits for TLB2. + * + * - CACHE COHERENT bit (M) has no effect on PPC440 core, because it + * doesn't support SMP. So we can use this as software bit, like + * DIRTY. + * + * With the PPC 44x Linux implementation, the 0-11th LSBs of the PTE are used + * for memory protection related functions (see PTE structure in + * include/asm-ppc/mmu.h). The _PAGE_XXX definitions in this file map to the + * above bits. Note that the bit values are CPU specific, not architecture + * specific. + * + * The kernel PTE entry holds an arch-dependent swp_entry structure under + * certain situations. In other words, in such situations some portion of + * the PTE bits are used as a swp_entry. In the PPC implementation, the + * 3-24th LSB are shared with swp_entry, however the 0-2nd three LSB still + * hold protection values. That means the three protection bits are + * reserved for both PTE and SWAP entry at the most significant three + * LSBs. + * + * There are three protection bits available for SWAP entry: + * _PAGE_PRESENT + * _PAGE_FILE + * _PAGE_HASHPTE (if HW has) + * + * So those three bits have to be inside of 0-2nd LSB of PTE. + * + */ + +#define _PAGE_PRESENT 0x00000001 /* S: PTE valid */ +#define _PAGE_RW 0x00000002 /* S: Write permission */ +#define _PAGE_FILE 0x00000004 /* S: nonlinear file mapping */ +#define _PAGE_HWEXEC 0x00000004 /* H: Execute permission */ +#define _PAGE_ACCESSED 0x00000008 /* S: Page referenced */ +#define _PAGE_DIRTY 0x00000010 /* S: Page dirty */ +#define _PAGE_USER 0x00000040 /* S: User page */ +#define _PAGE_ENDIAN 0x00000080 /* H: E bit */ +#define _PAGE_GUARDED 0x00000100 /* H: G bit */ +#define _PAGE_COHERENT 0x00000200 /* H: M bit */ +#define _PAGE_NO_CACHE 0x00000400 /* H: I bit */ +#define _PAGE_WRITETHRU 0x00000800 /* H: W bit */ + +/* TODO: Add large page lowmem mapping support */ +#define _PMD_PRESENT 0 +#define _PMD_PRESENT_MASK (PAGE_MASK) +#define _PMD_BAD (~PAGE_MASK) + +/* ERPN in a PTE never gets cleared, ignore it */ +#define _PTE_NONE_MASK 0xffffffff00000000ULL + + +#elif defined(CONFIG_FSL_BOOKE) +/* + MMU Assist Register 3: + + 32 33 34 35 36 ... 50 51 52 53 54 55 56 57 58 59 60 61 62 63 + RPN...................... 0 0 U0 U1 U2 U3 UX SX UW SW UR SR + + - PRESENT *must* be in the bottom three bits because swap cache + entries use the top 29 bits. + + - FILE *must* be in the bottom three bits because swap cache + entries use the top 29 bits. +*/ + +/* Definitions for FSL Book-E Cores */ +#define _PAGE_PRESENT 0x00001 /* S: PTE contains a translation */ +#define _PAGE_USER 0x00002 /* S: User page (maps to UR) */ +#define _PAGE_FILE 0x00002 /* S: when !present: nonlinear file mapping */ +#define _PAGE_RW 0x00004 /* S: Write permission (SW) */ +#define _PAGE_DIRTY 0x00008 /* S: Page dirty */ +#define _PAGE_HWEXEC 0x00010 /* H: SX permission */ +#define _PAGE_ACCESSED 0x00020 /* S: Page referenced */ + +#define _PAGE_ENDIAN 0x00040 /* H: E bit */ +#define _PAGE_GUARDED 0x00080 /* H: G bit */ +#define _PAGE_COHERENT 0x00100 /* H: M bit */ +#define _PAGE_NO_CACHE 0x00200 /* H: I bit */ +#define _PAGE_WRITETHRU 0x00400 /* H: W bit */ + +#ifdef CONFIG_PTE_64BIT +/* ERPN in a PTE never gets cleared, ignore it */ +#define _PTE_NONE_MASK 0xffffffffffff0000ULL +#endif + +#define _PMD_PRESENT 0 +#define _PMD_PRESENT_MASK (PAGE_MASK) +#define _PMD_BAD (~PAGE_MASK) + +#elif defined(CONFIG_8xx) +/* Definitions for 8xx embedded chips. */ +#define _PAGE_PRESENT 0x0001 /* Page is valid */ +#define _PAGE_FILE 0x0002 /* when !present: nonlinear file mapping */ +#define _PAGE_NO_CACHE 0x0002 /* I: cache inhibit */ +#define _PAGE_SHARED 0x0004 /* No ASID (context) compare */ + +/* These five software bits must be masked out when the entry is loaded + * into the TLB. + */ +#define _PAGE_EXEC 0x0008 /* software: i-cache coherency required */ +#define _PAGE_GUARDED 0x0010 /* software: guarded access */ +#define _PAGE_DIRTY 0x0020 /* software: page changed */ +#define _PAGE_RW 0x0040 /* software: user write access allowed */ +#define _PAGE_ACCESSED 0x0080 /* software: page referenced */ + +/* Setting any bits in the nibble with the follow two controls will + * require a TLB exception handler change. It is assumed unused bits + * are always zero. + */ +#define _PAGE_HWWRITE 0x0100 /* h/w write enable: never set in Linux PTE */ +#define _PAGE_USER 0x0800 /* One of the PP bits, the other is USER&~RW */ + +#define _PMD_PRESENT 0x0001 +#define _PMD_BAD 0x0ff0 +#define _PMD_PAGE_MASK 0x000c +#define _PMD_PAGE_8M 0x000c + +#define _PTE_NONE_MASK _PAGE_ACCESSED + +/* Until my rework is finished, 8xx still needs atomic PTE updates */ +#define PTE_ATOMIC_UPDATES 1 + +#else /* CONFIG_6xx */ +/* Definitions for 60x, 740/750, etc. */ +#define _PAGE_PRESENT 0x001 /* software: pte contains a translation */ +#define _PAGE_HASHPTE 0x002 /* hash_page has made an HPTE for this pte */ +#define _PAGE_FILE 0x004 /* when !present: nonlinear file mapping */ +#define _PAGE_USER 0x004 /* usermode access allowed */ +#define _PAGE_GUARDED 0x008 /* G: prohibit speculative access */ +#define _PAGE_COHERENT 0x010 /* M: enforce memory coherence (SMP systems) */ +#define _PAGE_NO_CACHE 0x020 /* I: cache inhibit */ +#define _PAGE_WRITETHRU 0x040 /* W: cache write-through */ +#define _PAGE_DIRTY 0x080 /* C: page changed */ +#define _PAGE_ACCESSED 0x100 /* R: page referenced */ +#define _PAGE_EXEC 0x200 /* software: i-cache coherency required */ +#define _PAGE_RW 0x400 /* software: user write access allowed */ + +#define _PTE_NONE_MASK _PAGE_HASHPTE + +#define _PMD_PRESENT 0 +#define _PMD_PRESENT_MASK (PAGE_MASK) +#define _PMD_BAD (~PAGE_MASK) + +/* Hash table based platforms need atomic updates of the linux PTE */ +#define PTE_ATOMIC_UPDATES 1 + +#endif + +/* + * Some bits are only used on some cpu families... + */ +#ifndef _PAGE_HASHPTE +#define _PAGE_HASHPTE 0 +#endif +#ifndef _PTE_NONE_MASK +#define _PTE_NONE_MASK 0 +#endif +#ifndef _PAGE_SHARED +#define _PAGE_SHARED 0 +#endif +#ifndef _PAGE_HWWRITE +#define _PAGE_HWWRITE 0 +#endif +#ifndef _PAGE_HWEXEC +#define _PAGE_HWEXEC 0 +#endif +#ifndef _PAGE_EXEC +#define _PAGE_EXEC 0 +#endif +#ifndef _PAGE_ENDIAN +#define _PAGE_ENDIAN 0 +#endif +#ifndef _PAGE_COHERENT +#define _PAGE_COHERENT 0 +#endif +#ifndef _PAGE_WRITETHRU +#define _PAGE_WRITETHRU 0 +#endif +#ifndef _PMD_PRESENT_MASK +#define _PMD_PRESENT_MASK _PMD_PRESENT +#endif +#ifndef _PMD_SIZE +#define _PMD_SIZE 0 +#define PMD_PAGE_SIZE(pmd) bad_call_to_PMD_PAGE_SIZE() +#endif + +#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY) + + +#define PAGE_PROT_BITS __pgprot(_PAGE_GUARDED | _PAGE_COHERENT | _PAGE_NO_CACHE | \ + _PAGE_WRITETHRU | _PAGE_ENDIAN | \ + _PAGE_USER | _PAGE_ACCESSED | \ + _PAGE_RW | _PAGE_HWWRITE | _PAGE_DIRTY | \ + _PAGE_EXEC | _PAGE_HWEXEC) +/* + * Note: the _PAGE_COHERENT bit automatically gets set in the hardware + * PTE if CONFIG_SMP is defined (hash_page does this); there is no need + * to have it in the Linux PTE, and in fact the bit could be reused for + * another purpose. -- paulus. + */ + +#ifdef CONFIG_44x +#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_GUARDED) +#else +#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED) +#endif +#define _PAGE_WRENABLE (_PAGE_RW | _PAGE_DIRTY | _PAGE_HWWRITE) +#define _PAGE_KERNEL (_PAGE_BASE | _PAGE_SHARED | _PAGE_WRENABLE) + +#ifdef CONFIG_PPC_STD_MMU +/* On standard PPC MMU, no user access implies kernel read/write access, + * so to write-protect kernel memory we must turn on user access */ +#define _PAGE_KERNEL_RO (_PAGE_BASE | _PAGE_SHARED | _PAGE_USER) +#else +#define _PAGE_KERNEL_RO (_PAGE_BASE | _PAGE_SHARED) +#endif + +#define _PAGE_IO (_PAGE_KERNEL | _PAGE_NO_CACHE | _PAGE_GUARDED) +#define _PAGE_RAM (_PAGE_KERNEL | _PAGE_HWEXEC) + +#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH) ||\ + defined(CONFIG_KPROBES) +/* We want the debuggers to be able to set breakpoints anywhere, so + * don't write protect the kernel text */ +#define _PAGE_RAM_TEXT _PAGE_RAM +#else +#define _PAGE_RAM_TEXT (_PAGE_KERNEL_RO | _PAGE_HWEXEC) +#endif + +#define PAGE_NONE __pgprot(_PAGE_BASE) +#define PAGE_READONLY __pgprot(_PAGE_BASE | _PAGE_USER) +#define PAGE_READONLY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC) +#define PAGE_SHARED __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW) +#define PAGE_SHARED_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | _PAGE_EXEC) +#define PAGE_COPY __pgprot(_PAGE_BASE | _PAGE_USER) +#define PAGE_COPY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC) + +#define PAGE_KERNEL __pgprot(_PAGE_RAM) +#define PAGE_KERNEL_NOCACHE __pgprot(_PAGE_IO) + +/* + * The PowerPC can only do execute protection on a segment (256MB) basis, + * not on a page basis. So we consider execute permission the same as read. + * Also, write permissions imply read permissions. + * This is the closest we can get.. + */ +#define __P000 PAGE_NONE +#define __P001 PAGE_READONLY_X +#define __P010 PAGE_COPY +#define __P011 PAGE_COPY_X +#define __P100 PAGE_READONLY +#define __P101 PAGE_READONLY_X +#define __P110 PAGE_COPY +#define __P111 PAGE_COPY_X + +#define __S000 PAGE_NONE +#define __S001 PAGE_READONLY_X +#define __S010 PAGE_SHARED +#define __S011 PAGE_SHARED_X +#define __S100 PAGE_READONLY +#define __S101 PAGE_READONLY_X +#define __S110 PAGE_SHARED +#define __S111 PAGE_SHARED_X + +#ifndef __ASSEMBLY__ +/* Make sure we get a link error if PMD_PAGE_SIZE is ever called on a + * kernel without large page PMD support */ +extern unsigned long bad_call_to_PMD_PAGE_SIZE(void); + +/* + * Conversions between PTE values and page frame numbers. + */ + +/* in some case we want to additionaly adjust where the pfn is in the pte to + * allow room for more flags */ +#if defined(CONFIG_FSL_BOOKE) && defined(CONFIG_PTE_64BIT) +#define PFN_SHIFT_OFFSET (PAGE_SHIFT + 8) +#else +#define PFN_SHIFT_OFFSET (PAGE_SHIFT) +#endif + +#define pte_pfn(x) (pte_val(x) >> PFN_SHIFT_OFFSET) +#define pte_page(x) pfn_to_page(pte_pfn(x)) + +#define pfn_pte(pfn, prot) __pte(((pte_basic_t)(pfn) << PFN_SHIFT_OFFSET) |\ + pgprot_val(prot)) +#define mk_pte(page, prot) pfn_pte(page_to_pfn(page), prot) +#endif /* __ASSEMBLY__ */ + +#define pte_none(pte) ((pte_val(pte) & ~_PTE_NONE_MASK) == 0) +#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT) +#define pte_clear(mm,addr,ptep) do { set_pte_at((mm), (addr), (ptep), __pte(0)); } while (0) + +#define pmd_none(pmd) (!pmd_val(pmd)) +#define pmd_bad(pmd) (pmd_val(pmd) & _PMD_BAD) +#define pmd_present(pmd) (pmd_val(pmd) & _PMD_PRESENT_MASK) +#define pmd_clear(pmdp) do { pmd_val(*(pmdp)) = 0; } while (0) + +#ifndef __ASSEMBLY__ +/* + * The following only work if pte_present() is true. + * Undefined behaviour if not.. + */ +static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW; } +static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; } +static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; } +static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; } +static inline int pte_special(pte_t pte) { return 0; } + +static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; } +static inline void pte_cache(pte_t pte) { pte_val(pte) &= ~_PAGE_NO_CACHE; } + +static inline pte_t pte_wrprotect(pte_t pte) { + pte_val(pte) &= ~(_PAGE_RW | _PAGE_HWWRITE); return pte; } +static inline pte_t pte_mkclean(pte_t pte) { + pte_val(pte) &= ~(_PAGE_DIRTY | _PAGE_HWWRITE); return pte; } +static inline pte_t pte_mkold(pte_t pte) { + pte_val(pte) &= ~_PAGE_ACCESSED; return pte; } + +static inline pte_t pte_mkwrite(pte_t pte) { + pte_val(pte) |= _PAGE_RW; return pte; } +static inline pte_t pte_mkdirty(pte_t pte) { + pte_val(pte) |= _PAGE_DIRTY; return pte; } +static inline pte_t pte_mkyoung(pte_t pte) { + pte_val(pte) |= _PAGE_ACCESSED; return pte; } +static inline pte_t pte_mkspecial(pte_t pte) { + return pte; } +static inline unsigned long pte_pgprot(pte_t pte) +{ + return __pgprot(pte_val(pte)) & PAGE_PROT_BITS; +} + +static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) +{ + pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot); + return pte; +} + +/* + * When flushing the tlb entry for a page, we also need to flush the hash + * table entry. flush_hash_pages is assembler (for speed) in hashtable.S. + */ +extern int flush_hash_pages(unsigned context, unsigned long va, + unsigned long pmdval, int count); + +/* Add an HPTE to the hash table */ +extern void add_hash_page(unsigned context, unsigned long va, + unsigned long pmdval); + +/* + * Atomic PTE updates. + * + * pte_update clears and sets bit atomically, and returns + * the old pte value. In the 64-bit PTE case we lock around the + * low PTE word since we expect ALL flag bits to be there + */ +#ifndef CONFIG_PTE_64BIT +static inline unsigned long pte_update(pte_t *p, + unsigned long clr, + unsigned long set) +{ +#ifdef PTE_ATOMIC_UPDATES + unsigned long old, tmp; + + __asm__ __volatile__("\ +1: lwarx %0,0,%3\n\ + andc %1,%0,%4\n\ + or %1,%1,%5\n" + PPC405_ERR77(0,%3) +" stwcx. %1,0,%3\n\ + bne- 1b" + : "=&r" (old), "=&r" (tmp), "=m" (*p) + : "r" (p), "r" (clr), "r" (set), "m" (*p) + : "cc" ); +#else /* PTE_ATOMIC_UPDATES */ + unsigned long old = pte_val(*p); + *p = __pte((old & ~clr) | set); +#endif /* !PTE_ATOMIC_UPDATES */ + +#ifdef CONFIG_44x + if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC)) + icache_44x_need_flush = 1; +#endif + return old; +} +#else /* CONFIG_PTE_64BIT */ +/* TODO: Change that to only modify the low word and move set_pte_at() + * out of line + */ +static inline unsigned long long pte_update(pte_t *p, + unsigned long clr, + unsigned long set) +{ +#ifdef PTE_ATOMIC_UPDATES + unsigned long long old; + unsigned long tmp; + + __asm__ __volatile__("\ +1: lwarx %L0,0,%4\n\ + lwzx %0,0,%3\n\ + andc %1,%L0,%5\n\ + or %1,%1,%6\n" + PPC405_ERR77(0,%3) +" stwcx. %1,0,%4\n\ + bne- 1b" + : "=&r" (old), "=&r" (tmp), "=m" (*p) + : "r" (p), "r" ((unsigned long)(p) + 4), "r" (clr), "r" (set), "m" (*p) + : "cc" ); +#else /* PTE_ATOMIC_UPDATES */ + unsigned long long old = pte_val(*p); + *p = __pte((old & ~(unsigned long long)clr) | set); +#endif /* !PTE_ATOMIC_UPDATES */ + +#ifdef CONFIG_44x + if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC)) + icache_44x_need_flush = 1; +#endif + return old; +} +#endif /* CONFIG_PTE_64BIT */ + +/* + * set_pte stores a linux PTE into the linux page table. + * On machines which use an MMU hash table we avoid changing the + * _PAGE_HASHPTE bit. + */ +static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pte) +{ +#if _PAGE_HASHPTE != 0 + pte_update(ptep, ~_PAGE_HASHPTE, pte_val(pte) & ~_PAGE_HASHPTE); +#else + *ptep = pte; +#endif +} + +/* + * 2.6 calls this without flushing the TLB entry; this is wrong + * for our hash-based implementation, we fix that up here. + */ +#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG +static inline int __ptep_test_and_clear_young(unsigned int context, unsigned long addr, pte_t *ptep) +{ + unsigned long old; + old = pte_update(ptep, _PAGE_ACCESSED, 0); +#if _PAGE_HASHPTE != 0 + if (old & _PAGE_HASHPTE) { + unsigned long ptephys = __pa(ptep) & PAGE_MASK; + flush_hash_pages(context, addr, ptephys, 1); + } +#endif + return (old & _PAGE_ACCESSED) != 0; +} +#define ptep_test_and_clear_young(__vma, __addr, __ptep) \ + __ptep_test_and_clear_young((__vma)->vm_mm->context.id, __addr, __ptep) + +#define __HAVE_ARCH_PTEP_GET_AND_CLEAR +static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, + pte_t *ptep) +{ + return __pte(pte_update(ptep, ~_PAGE_HASHPTE, 0)); +} + +#define __HAVE_ARCH_PTEP_SET_WRPROTECT +static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, + pte_t *ptep) +{ + pte_update(ptep, (_PAGE_RW | _PAGE_HWWRITE), 0); +} +static inline void huge_ptep_set_wrprotect(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + ptep_set_wrprotect(mm, addr, ptep); +} + + +#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS +static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty) +{ + unsigned long bits = pte_val(entry) & + (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW); + pte_update(ptep, 0, bits); +} + +#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \ +({ \ + int __changed = !pte_same(*(__ptep), __entry); \ + if (__changed) { \ + __ptep_set_access_flags(__ptep, __entry, __dirty); \ + flush_tlb_page_nohash(__vma, __address); \ + } \ + __changed; \ +}) + +/* + * Macro to mark a page protection value as "uncacheable". + */ +#define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) | _PAGE_NO_CACHE | _PAGE_GUARDED)) + +struct file; +extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, + unsigned long size, pgprot_t vma_prot); +#define __HAVE_PHYS_MEM_ACCESS_PROT + +#define __HAVE_ARCH_PTE_SAME +#define pte_same(A,B) (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HASHPTE) == 0) + +/* + * Note that on Book E processors, the pmd contains the kernel virtual + * (lowmem) address of the pte page. The physical address is less useful + * because everything runs with translation enabled (even the TLB miss + * handler). On everything else the pmd contains the physical address + * of the pte page. -- paulus + */ +#ifndef CONFIG_BOOKE +#define pmd_page_vaddr(pmd) \ + ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK)) +#define pmd_page(pmd) \ + (mem_map + (pmd_val(pmd) >> PAGE_SHIFT)) +#else +#define pmd_page_vaddr(pmd) \ + ((unsigned long) (pmd_val(pmd) & PAGE_MASK)) +#define pmd_page(pmd) \ + pfn_to_page((__pa(pmd_val(pmd)) >> PAGE_SHIFT)) +#endif + +/* to find an entry in a kernel page-table-directory */ +#define pgd_offset_k(address) pgd_offset(&init_mm, address) + +/* to find an entry in a page-table-directory */ +#define pgd_index(address) ((address) >> PGDIR_SHIFT) +#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address)) + +/* Find an entry in the third-level page table.. */ +#define pte_index(address) \ + (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) +#define pte_offset_kernel(dir, addr) \ + ((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(addr)) +#define pte_offset_map(dir, addr) \ + ((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE0) + pte_index(addr)) +#define pte_offset_map_nested(dir, addr) \ + ((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE1) + pte_index(addr)) + +#define pte_unmap(pte) kunmap_atomic(pte, KM_PTE0) +#define pte_unmap_nested(pte) kunmap_atomic(pte, KM_PTE1) + +/* + * Encode and decode a swap entry. + * Note that the bits we use in a PTE for representing a swap entry + * must not include the _PAGE_PRESENT bit, the _PAGE_FILE bit, or the + *_PAGE_HASHPTE bit (if used). -- paulus + */ +#define __swp_type(entry) ((entry).val & 0x1f) +#define __swp_offset(entry) ((entry).val >> 5) +#define __swp_entry(type, offset) ((swp_entry_t) { (type) | ((offset) << 5) }) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 3 }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val << 3 }) + +/* Encode and decode a nonlinear file mapping entry */ +#define PTE_FILE_MAX_BITS 29 +#define pte_to_pgoff(pte) (pte_val(pte) >> 3) +#define pgoff_to_pte(off) ((pte_t) { ((off) << 3) | _PAGE_FILE }) + +/* + * No page table caches to initialise + */ +#define pgtable_cache_init() do { } while (0) + +extern int get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep, + pmd_t **pmdp); + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_PGTABLE_PPC32_H */ diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h new file mode 100644 index 00000000000..db0b8f3b880 --- /dev/null +++ b/arch/powerpc/include/asm/pgtable-ppc64.h @@ -0,0 +1,468 @@ +#ifndef _ASM_POWERPC_PGTABLE_PPC64_H_ +#define _ASM_POWERPC_PGTABLE_PPC64_H_ +/* + * This file contains the functions and defines necessary to modify and use + * the ppc64 hashed page table. + */ + +#ifndef __ASSEMBLY__ +#include +#include +#endif /* __ASSEMBLY__ */ + +#ifdef CONFIG_PPC_64K_PAGES +#include +#else +#include +#endif + +#define FIRST_USER_ADDRESS 0 + +/* + * Size of EA range mapped by our pagetables. + */ +#define PGTABLE_EADDR_SIZE (PTE_INDEX_SIZE + PMD_INDEX_SIZE + \ + PUD_INDEX_SIZE + PGD_INDEX_SIZE + PAGE_SHIFT) +#define PGTABLE_RANGE (ASM_CONST(1) << PGTABLE_EADDR_SIZE) + +#if TASK_SIZE_USER64 > PGTABLE_RANGE +#error TASK_SIZE_USER64 exceeds pagetable range +#endif + +#if TASK_SIZE_USER64 > (1UL << (USER_ESID_BITS + SID_SHIFT)) +#error TASK_SIZE_USER64 exceeds user VSID range +#endif + + +/* + * Define the address range of the vmalloc VM area. + */ +#define VMALLOC_START ASM_CONST(0xD000000000000000) +#define VMALLOC_SIZE (PGTABLE_RANGE >> 1) +#define VMALLOC_END (VMALLOC_START + VMALLOC_SIZE) + +/* + * Define the address ranges for MMIO and IO space : + * + * ISA_IO_BASE = VMALLOC_END, 64K reserved area + * PHB_IO_BASE = ISA_IO_BASE + 64K to ISA_IO_BASE + 2G, PHB IO spaces + * IOREMAP_BASE = ISA_IO_BASE + 2G to VMALLOC_START + PGTABLE_RANGE + */ +#define FULL_IO_SIZE 0x80000000ul +#define ISA_IO_BASE (VMALLOC_END) +#define ISA_IO_END (VMALLOC_END + 0x10000ul) +#define PHB_IO_BASE (ISA_IO_END) +#define PHB_IO_END (VMALLOC_END + FULL_IO_SIZE) +#define IOREMAP_BASE (PHB_IO_END) +#define IOREMAP_END (VMALLOC_START + PGTABLE_RANGE) + +/* + * Region IDs + */ +#define REGION_SHIFT 60UL +#define REGION_MASK (0xfUL << REGION_SHIFT) +#define REGION_ID(ea) (((unsigned long)(ea)) >> REGION_SHIFT) + +#define VMALLOC_REGION_ID (REGION_ID(VMALLOC_START)) +#define KERNEL_REGION_ID (REGION_ID(PAGE_OFFSET)) +#define VMEMMAP_REGION_ID (0xfUL) +#define USER_REGION_ID (0UL) + +/* + * Defines the address of the vmemap area, in its own region + */ +#define VMEMMAP_BASE (VMEMMAP_REGION_ID << REGION_SHIFT) +#define vmemmap ((struct page *)VMEMMAP_BASE) + + +/* + * Common bits in a linux-style PTE. These match the bits in the + * (hardware-defined) PowerPC PTE as closely as possible. Additional + * bits may be defined in pgtable-*.h + */ +#define _PAGE_PRESENT 0x0001 /* software: pte contains a translation */ +#define _PAGE_USER 0x0002 /* matches one of the PP bits */ +#define _PAGE_FILE 0x0002 /* (!present only) software: pte holds file offset */ +#define _PAGE_EXEC 0x0004 /* No execute on POWER4 and newer (we invert) */ +#define _PAGE_GUARDED 0x0008 +#define _PAGE_COHERENT 0x0010 /* M: enforce memory coherence (SMP systems) */ +#define _PAGE_NO_CACHE 0x0020 /* I: cache inhibit */ +#define _PAGE_WRITETHRU 0x0040 /* W: cache write-through */ +#define _PAGE_DIRTY 0x0080 /* C: page changed */ +#define _PAGE_ACCESSED 0x0100 /* R: page referenced */ +#define _PAGE_RW 0x0200 /* software: user write access allowed */ +#define _PAGE_BUSY 0x0800 /* software: PTE & hash are busy */ + +/* Strong Access Ordering */ +#define _PAGE_SAO (_PAGE_WRITETHRU | _PAGE_NO_CACHE | _PAGE_COHERENT) + +#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_COHERENT) + +#define _PAGE_WRENABLE (_PAGE_RW | _PAGE_DIRTY) + +/* __pgprot defined in arch/powerpc/incliude/asm/page.h */ +#define PAGE_NONE __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED) + +#define PAGE_SHARED __pgprot(_PAGE_BASE | _PAGE_RW | _PAGE_USER) +#define PAGE_SHARED_X __pgprot(_PAGE_BASE | _PAGE_RW | _PAGE_USER | _PAGE_EXEC) +#define PAGE_COPY __pgprot(_PAGE_BASE | _PAGE_USER) +#define PAGE_COPY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC) +#define PAGE_READONLY __pgprot(_PAGE_BASE | _PAGE_USER) +#define PAGE_READONLY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC) +#define PAGE_KERNEL __pgprot(_PAGE_BASE | _PAGE_WRENABLE) +#define PAGE_KERNEL_CI __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ + _PAGE_WRENABLE | _PAGE_NO_CACHE | _PAGE_GUARDED) +#define PAGE_KERNEL_EXEC __pgprot(_PAGE_BASE | _PAGE_WRENABLE | _PAGE_EXEC) + +#define PAGE_AGP __pgprot(_PAGE_BASE | _PAGE_WRENABLE | _PAGE_NO_CACHE) +#define HAVE_PAGE_AGP + +#define PAGE_PROT_BITS __pgprot(_PAGE_GUARDED | _PAGE_COHERENT | \ + _PAGE_NO_CACHE | _PAGE_WRITETHRU | \ + _PAGE_4K_PFN | _PAGE_RW | _PAGE_USER | \ + _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_EXEC) +/* PTEIDX nibble */ +#define _PTEIDX_SECONDARY 0x8 +#define _PTEIDX_GROUP_IX 0x7 + + +/* + * POWER4 and newer have per page execute protection, older chips can only + * do this on a segment (256MB) basis. + * + * Also, write permissions imply read permissions. + * This is the closest we can get.. + * + * Note due to the way vm flags are laid out, the bits are XWR + */ +#define __P000 PAGE_NONE +#define __P001 PAGE_READONLY +#define __P010 PAGE_COPY +#define __P011 PAGE_COPY +#define __P100 PAGE_READONLY_X +#define __P101 PAGE_READONLY_X +#define __P110 PAGE_COPY_X +#define __P111 PAGE_COPY_X + +#define __S000 PAGE_NONE +#define __S001 PAGE_READONLY +#define __S010 PAGE_SHARED +#define __S011 PAGE_SHARED +#define __S100 PAGE_READONLY_X +#define __S101 PAGE_READONLY_X +#define __S110 PAGE_SHARED_X +#define __S111 PAGE_SHARED_X + +#ifdef CONFIG_HUGETLB_PAGE + +#define HAVE_ARCH_UNMAPPED_AREA +#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN + +#endif + +#ifndef __ASSEMBLY__ + +/* + * Conversion functions: convert a page and protection to a page entry, + * and a page entry and page directory to the page they refer to. + * + * mk_pte takes a (struct page *) as input + */ +#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) + +static inline pte_t pfn_pte(unsigned long pfn, pgprot_t pgprot) +{ + pte_t pte; + + + pte_val(pte) = (pfn << PTE_RPN_SHIFT) | pgprot_val(pgprot); + return pte; +} + +#define pte_modify(_pte, newprot) \ + (__pte((pte_val(_pte) & _PAGE_CHG_MASK) | pgprot_val(newprot))) + +#define pte_none(pte) ((pte_val(pte) & ~_PAGE_HPTEFLAGS) == 0) +#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT) + +/* pte_clear moved to later in this file */ + +#define pte_pfn(x) ((unsigned long)((pte_val(x)>>PTE_RPN_SHIFT))) +#define pte_page(x) pfn_to_page(pte_pfn(x)) + +#define PMD_BAD_BITS (PTE_TABLE_SIZE-1) +#define PUD_BAD_BITS (PMD_TABLE_SIZE-1) + +#define pmd_set(pmdp, pmdval) (pmd_val(*(pmdp)) = (pmdval)) +#define pmd_none(pmd) (!pmd_val(pmd)) +#define pmd_bad(pmd) (!is_kernel_addr(pmd_val(pmd)) \ + || (pmd_val(pmd) & PMD_BAD_BITS)) +#define pmd_present(pmd) (pmd_val(pmd) != 0) +#define pmd_clear(pmdp) (pmd_val(*(pmdp)) = 0) +#define pmd_page_vaddr(pmd) (pmd_val(pmd) & ~PMD_MASKED_BITS) +#define pmd_page(pmd) virt_to_page(pmd_page_vaddr(pmd)) + +#define pud_set(pudp, pudval) (pud_val(*(pudp)) = (pudval)) +#define pud_none(pud) (!pud_val(pud)) +#define pud_bad(pud) (!is_kernel_addr(pud_val(pud)) \ + || (pud_val(pud) & PUD_BAD_BITS)) +#define pud_present(pud) (pud_val(pud) != 0) +#define pud_clear(pudp) (pud_val(*(pudp)) = 0) +#define pud_page_vaddr(pud) (pud_val(pud) & ~PUD_MASKED_BITS) +#define pud_page(pud) virt_to_page(pud_page_vaddr(pud)) + +#define pgd_set(pgdp, pudp) ({pgd_val(*(pgdp)) = (unsigned long)(pudp);}) + +/* + * Find an entry in a page-table-directory. We combine the address region + * (the high order N bits) and the pgd portion of the address. + */ +/* to avoid overflow in free_pgtables we don't use PTRS_PER_PGD here */ +#define pgd_index(address) (((address) >> (PGDIR_SHIFT)) & 0x1ff) + +#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address)) + +#define pmd_offset(pudp,addr) \ + (((pmd_t *) pud_page_vaddr(*(pudp))) + (((addr) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))) + +#define pte_offset_kernel(dir,addr) \ + (((pte_t *) pmd_page_vaddr(*(dir))) + (((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))) + +#define pte_offset_map(dir,addr) pte_offset_kernel((dir), (addr)) +#define pte_offset_map_nested(dir,addr) pte_offset_kernel((dir), (addr)) +#define pte_unmap(pte) do { } while(0) +#define pte_unmap_nested(pte) do { } while(0) + +/* to find an entry in a kernel page-table-directory */ +/* This now only contains the vmalloc pages */ +#define pgd_offset_k(address) pgd_offset(&init_mm, address) + +/* + * The following only work if pte_present() is true. + * Undefined behaviour if not.. + */ +static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW;} +static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY;} +static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED;} +static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE;} +static inline int pte_special(pte_t pte) { return pte_val(pte) & _PAGE_SPECIAL; } + +static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; } +static inline void pte_cache(pte_t pte) { pte_val(pte) &= ~_PAGE_NO_CACHE; } + +static inline pte_t pte_wrprotect(pte_t pte) { + pte_val(pte) &= ~(_PAGE_RW); return pte; } +static inline pte_t pte_mkclean(pte_t pte) { + pte_val(pte) &= ~(_PAGE_DIRTY); return pte; } +static inline pte_t pte_mkold(pte_t pte) { + pte_val(pte) &= ~_PAGE_ACCESSED; return pte; } +static inline pte_t pte_mkwrite(pte_t pte) { + pte_val(pte) |= _PAGE_RW; return pte; } +static inline pte_t pte_mkdirty(pte_t pte) { + pte_val(pte) |= _PAGE_DIRTY; return pte; } +static inline pte_t pte_mkyoung(pte_t pte) { + pte_val(pte) |= _PAGE_ACCESSED; return pte; } +static inline pte_t pte_mkhuge(pte_t pte) { + return pte; } +static inline pte_t pte_mkspecial(pte_t pte) { + pte_val(pte) |= _PAGE_SPECIAL; return pte; } +static inline unsigned long pte_pgprot(pte_t pte) +{ + return __pgprot(pte_val(pte)) & PAGE_PROT_BITS; +} + +/* Atomic PTE updates */ +static inline unsigned long pte_update(struct mm_struct *mm, + unsigned long addr, + pte_t *ptep, unsigned long clr, + int huge) +{ + unsigned long old, tmp; + + __asm__ __volatile__( + "1: ldarx %0,0,%3 # pte_update\n\ + andi. %1,%0,%6\n\ + bne- 1b \n\ + andc %1,%0,%4 \n\ + stdcx. %1,0,%3 \n\ + bne- 1b" + : "=&r" (old), "=&r" (tmp), "=m" (*ptep) + : "r" (ptep), "r" (clr), "m" (*ptep), "i" (_PAGE_BUSY) + : "cc" ); + + if (old & _PAGE_HASHPTE) + hpte_need_flush(mm, addr, ptep, old, huge); + return old; +} + +static inline int __ptep_test_and_clear_young(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + unsigned long old; + + if ((pte_val(*ptep) & (_PAGE_ACCESSED | _PAGE_HASHPTE)) == 0) + return 0; + old = pte_update(mm, addr, ptep, _PAGE_ACCESSED, 0); + return (old & _PAGE_ACCESSED) != 0; +} +#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG +#define ptep_test_and_clear_young(__vma, __addr, __ptep) \ +({ \ + int __r; \ + __r = __ptep_test_and_clear_young((__vma)->vm_mm, __addr, __ptep); \ + __r; \ +}) + +#define __HAVE_ARCH_PTEP_SET_WRPROTECT +static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, + pte_t *ptep) +{ + unsigned long old; + + if ((pte_val(*ptep) & _PAGE_RW) == 0) + return; + old = pte_update(mm, addr, ptep, _PAGE_RW, 0); +} + +static inline void huge_ptep_set_wrprotect(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + unsigned long old; + + if ((pte_val(*ptep) & _PAGE_RW) == 0) + return; + old = pte_update(mm, addr, ptep, _PAGE_RW, 1); +} + +/* + * We currently remove entries from the hashtable regardless of whether + * the entry was young or dirty. The generic routines only flush if the + * entry was young or dirty which is not good enough. + * + * We should be more intelligent about this but for the moment we override + * these functions and force a tlb flush unconditionally + */ +#define __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH +#define ptep_clear_flush_young(__vma, __address, __ptep) \ +({ \ + int __young = __ptep_test_and_clear_young((__vma)->vm_mm, __address, \ + __ptep); \ + __young; \ +}) + +#define __HAVE_ARCH_PTEP_GET_AND_CLEAR +static inline pte_t ptep_get_and_clear(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + unsigned long old = pte_update(mm, addr, ptep, ~0UL, 0); + return __pte(old); +} + +static inline void pte_clear(struct mm_struct *mm, unsigned long addr, + pte_t * ptep) +{ + pte_update(mm, addr, ptep, ~0UL, 0); +} + +/* + * set_pte stores a linux PTE into the linux page table. + */ +static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pte) +{ + if (pte_present(*ptep)) + pte_clear(mm, addr, ptep); + pte = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS); + *ptep = pte; +} + +/* Set the dirty and/or accessed bits atomically in a linux PTE, this + * function doesn't need to flush the hash entry + */ +#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS +static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty) +{ + unsigned long bits = pte_val(entry) & + (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC); + unsigned long old, tmp; + + __asm__ __volatile__( + "1: ldarx %0,0,%4\n\ + andi. %1,%0,%6\n\ + bne- 1b \n\ + or %0,%3,%0\n\ + stdcx. %0,0,%4\n\ + bne- 1b" + :"=&r" (old), "=&r" (tmp), "=m" (*ptep) + :"r" (bits), "r" (ptep), "m" (*ptep), "i" (_PAGE_BUSY) + :"cc"); +} +#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \ +({ \ + int __changed = !pte_same(*(__ptep), __entry); \ + if (__changed) { \ + __ptep_set_access_flags(__ptep, __entry, __dirty); \ + flush_tlb_page_nohash(__vma, __address); \ + } \ + __changed; \ +}) + +/* + * Macro to mark a page protection value as "uncacheable". + */ +#define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) | _PAGE_NO_CACHE | _PAGE_GUARDED)) + +struct file; +extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, + unsigned long size, pgprot_t vma_prot); +#define __HAVE_PHYS_MEM_ACCESS_PROT + +#define __HAVE_ARCH_PTE_SAME +#define pte_same(A,B) (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HPTEFLAGS) == 0) + +#define pte_ERROR(e) \ + printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) +#define pmd_ERROR(e) \ + printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e)) +#define pgd_ERROR(e) \ + printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) + +/* Encode and de-code a swap entry */ +#define __swp_type(entry) (((entry).val >> 1) & 0x3f) +#define __swp_offset(entry) ((entry).val >> 8) +#define __swp_entry(type, offset) ((swp_entry_t){((type)<< 1)|((offset)<<8)}) +#define __pte_to_swp_entry(pte) ((swp_entry_t){pte_val(pte) >> PTE_RPN_SHIFT}) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val << PTE_RPN_SHIFT }) +#define pte_to_pgoff(pte) (pte_val(pte) >> PTE_RPN_SHIFT) +#define pgoff_to_pte(off) ((pte_t) {((off) << PTE_RPN_SHIFT)|_PAGE_FILE}) +#define PTE_FILE_MAX_BITS (BITS_PER_LONG - PTE_RPN_SHIFT) + +void pgtable_cache_init(void); + +/* + * find_linux_pte returns the address of a linux pte for a given + * effective address and directory. If not found, it returns zero. + */static inline pte_t *find_linux_pte(pgd_t *pgdir, unsigned long ea) +{ + pgd_t *pg; + pud_t *pu; + pmd_t *pm; + pte_t *pt = NULL; + + pg = pgdir + pgd_index(ea); + if (!pgd_none(*pg)) { + pu = pud_offset(pg, ea); + if (!pud_none(*pu)) { + pm = pmd_offset(pu, ea); + if (pmd_present(*pm)) + pt = pte_offset_kernel(pm, ea); + } + } + return pt; +} + +pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long address); + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_PGTABLE_PPC64_H_ */ diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h new file mode 100644 index 00000000000..dbb8ca172e4 --- /dev/null +++ b/arch/powerpc/include/asm/pgtable.h @@ -0,0 +1,57 @@ +#ifndef _ASM_POWERPC_PGTABLE_H +#define _ASM_POWERPC_PGTABLE_H +#ifdef __KERNEL__ + +#ifndef __ASSEMBLY__ +#include /* For TASK_SIZE */ +#include +#include +struct mm_struct; +#endif /* !__ASSEMBLY__ */ + +#if defined(CONFIG_PPC64) +# include +#else +# include +#endif + +#ifndef __ASSEMBLY__ +/* + * ZERO_PAGE is a global shared page that is always zero: used + * for zero-mapped memory areas etc.. + */ +extern unsigned long empty_zero_page[]; +#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page)) + +extern pgd_t swapper_pg_dir[]; + +extern void paging_init(void); + +/* + * kern_addr_valid is intended to indicate whether an address is a valid + * kernel address. Most 32-bit archs define it as always true (like this) + * but most 64-bit archs actually perform a test. What should we do here? + */ +#define kern_addr_valid(addr) (1) + +#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ + remap_pfn_range(vma, vaddr, pfn, size, prot) + +#include + + +/* + * This gets called at the end of handling a page fault, when + * the kernel has put a new PTE into the page table for the process. + * We use it to ensure coherency between the i-cache and d-cache + * for the page which has just been mapped in. + * On machines which use an MMU hash table, we use this to put a + * corresponding HPTE into the hash table ahead of time, instead of + * waiting for the inevitable extra hash-table miss exception. + */ +extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t); + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_PGTABLE_H */ diff --git a/arch/powerpc/include/asm/phyp_dump.h b/arch/powerpc/include/asm/phyp_dump.h new file mode 100644 index 00000000000..fa74c6c3e10 --- /dev/null +++ b/arch/powerpc/include/asm/phyp_dump.h @@ -0,0 +1,47 @@ +/* + * Hypervisor-assisted dump + * + * Linas Vepstas, Manish Ahuja 2008 + * Copyright 2008 IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _PPC64_PHYP_DUMP_H +#define _PPC64_PHYP_DUMP_H + +#ifdef CONFIG_PHYP_DUMP + +/* The RMR region will be saved for later dumping + * whenever the kernel crashes. Set this to 256MB. */ +#define PHYP_DUMP_RMR_START 0x0 +#define PHYP_DUMP_RMR_END (1UL<<28) + +struct phyp_dump { + /* Memory that is reserved during very early boot. */ + unsigned long init_reserve_start; + unsigned long init_reserve_size; + /* cmd line options during boot */ + unsigned long reserve_bootvar; + unsigned long phyp_dump_at_boot; + /* Check status during boot if dump supported, active & present*/ + unsigned long phyp_dump_configured; + unsigned long phyp_dump_is_active; + /* store cpu & hpte size */ + unsigned long cpu_state_size; + unsigned long hpte_region_size; + /* previous scratch area values */ + unsigned long reserved_scratch_addr; + unsigned long reserved_scratch_size; +}; + +extern struct phyp_dump *phyp_dump_info; + +int early_init_dt_scan_phyp_dump(unsigned long node, + const char *uname, int depth, void *data); + +#endif /* CONFIG_PHYP_DUMP */ +#endif /* _PPC64_PHYP_DUMP_H */ diff --git a/arch/powerpc/include/asm/pmac_feature.h b/arch/powerpc/include/asm/pmac_feature.h new file mode 100644 index 00000000000..877c35a4356 --- /dev/null +++ b/arch/powerpc/include/asm/pmac_feature.h @@ -0,0 +1,405 @@ +/* + * Definition of platform feature hooks for PowerMacs + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998 Paul Mackerras & + * Ben. Herrenschmidt. + * + * + * Note: I removed media-bay details from the feature stuff, I believe it's + * not worth it, the media-bay driver can directly use the mac-io + * ASIC registers. + * + * Implementation note: Currently, none of these functions will block. + * However, they may internally protect themselves with a spinlock + * for way too long. Be prepared for at least some of these to block + * in the future. + * + * Unless specifically defined, the result code is assumed to be an + * error when negative, 0 is the default success result. Some functions + * may return additional positive result values. + * + * To keep implementation simple, all feature calls are assumed to have + * the prototype parameters (struct device_node* node, int value). + * When either is not used, pass 0. + */ + +#ifdef __KERNEL__ +#ifndef __ASM_POWERPC_PMAC_FEATURE_H +#define __ASM_POWERPC_PMAC_FEATURE_H + +#include +#include + +/* + * Known Mac motherboard models + * + * Please, report any error here to benh@kernel.crashing.org, thanks ! + * + * Note that I don't fully maintain this list for Core99 & MacRISC2 + * and I'm considering removing all NewWorld entries from it and + * entirely rely on the model string. + */ + +/* PowerSurge are the first generation of PCI Pmacs. This include + * all of the Grand-Central based machines. We currently don't + * differenciate most of them. + */ +#define PMAC_TYPE_PSURGE 0x10 /* PowerSurge */ +#define PMAC_TYPE_ANS 0x11 /* Apple Network Server */ + +/* Here is the infamous serie of OHare based machines + */ +#define PMAC_TYPE_COMET 0x20 /* Beleived to be PowerBook 2400 */ +#define PMAC_TYPE_HOOPER 0x21 /* Beleived to be PowerBook 3400 */ +#define PMAC_TYPE_KANGA 0x22 /* PowerBook 3500 (first G3) */ +#define PMAC_TYPE_ALCHEMY 0x23 /* Alchemy motherboard base */ +#define PMAC_TYPE_GAZELLE 0x24 /* Spartacus, some 5xxx/6xxx */ +#define PMAC_TYPE_UNKNOWN_OHARE 0x2f /* Unknown, but OHare based */ + +/* Here are the Heathrow based machines + * FIXME: Differenciate wallstreet,mainstreet,wallstreetII + */ +#define PMAC_TYPE_GOSSAMER 0x30 /* Gossamer motherboard */ +#define PMAC_TYPE_SILK 0x31 /* Desktop PowerMac G3 */ +#define PMAC_TYPE_WALLSTREET 0x32 /* Wallstreet/Mainstreet PowerBook*/ +#define PMAC_TYPE_UNKNOWN_HEATHROW 0x3f /* Unknown but heathrow based */ + +/* Here are newworld machines based on Paddington (heathrow derivative) + */ +#define PMAC_TYPE_101_PBOOK 0x40 /* 101 PowerBook (aka Lombard) */ +#define PMAC_TYPE_ORIG_IMAC 0x41 /* First generation iMac */ +#define PMAC_TYPE_YOSEMITE 0x42 /* B&W G3 */ +#define PMAC_TYPE_YIKES 0x43 /* Yikes G4 (PCI graphics) */ +#define PMAC_TYPE_UNKNOWN_PADDINGTON 0x4f /* Unknown but paddington based */ + +/* Core99 machines based on UniNorth 1.0 and 1.5 + * + * Note: A single entry here may cover several actual models according + * to the device-tree. (Sawtooth is most tower G4s, FW_IMAC is most + * FireWire based iMacs, etc...). Those machines are too similar to be + * distinguished here, when they need to be differencied, use the + * device-tree "model" or "compatible" property. + */ +#define PMAC_TYPE_ORIG_IBOOK 0x40 /* First iBook model (no firewire) */ +#define PMAC_TYPE_SAWTOOTH 0x41 /* Desktop G4s */ +#define PMAC_TYPE_FW_IMAC 0x42 /* FireWire iMacs (except Pangea based) */ +#define PMAC_TYPE_FW_IBOOK 0x43 /* FireWire iBooks (except iBook2) */ +#define PMAC_TYPE_CUBE 0x44 /* Cube PowerMac */ +#define PMAC_TYPE_QUICKSILVER 0x45 /* QuickSilver G4s */ +#define PMAC_TYPE_PISMO 0x46 /* Pismo PowerBook */ +#define PMAC_TYPE_TITANIUM 0x47 /* Titanium PowerBook */ +#define PMAC_TYPE_TITANIUM2 0x48 /* Titanium II PowerBook (no L3, M6) */ +#define PMAC_TYPE_TITANIUM3 0x49 /* Titanium III PowerBook (with L3 & M7) */ +#define PMAC_TYPE_TITANIUM4 0x50 /* Titanium IV PowerBook (with L3 & M9) */ +#define PMAC_TYPE_EMAC 0x50 /* eMac */ +#define PMAC_TYPE_UNKNOWN_CORE99 0x5f + +/* MacRisc2 with UniNorth 2.0 */ +#define PMAC_TYPE_RACKMAC 0x80 /* XServe */ +#define PMAC_TYPE_WINDTUNNEL 0x81 + +/* MacRISC2 machines based on the Pangea chipset + */ +#define PMAC_TYPE_PANGEA_IMAC 0x100 /* Flower Power iMac */ +#define PMAC_TYPE_IBOOK2 0x101 /* iBook2 (polycarbonate) */ +#define PMAC_TYPE_FLAT_PANEL_IMAC 0x102 /* Flat panel iMac */ +#define PMAC_TYPE_UNKNOWN_PANGEA 0x10f + +/* MacRISC2 machines based on the Intrepid chipset + */ +#define PMAC_TYPE_UNKNOWN_INTREPID 0x11f /* Generic */ + +/* MacRISC4 / G5 machines. We don't have per-machine selection here anymore, + * but rather machine families + */ +#define PMAC_TYPE_POWERMAC_G5 0x150 /* U3 & U3H based */ +#define PMAC_TYPE_POWERMAC_G5_U3L 0x151 /* U3L based desktop */ +#define PMAC_TYPE_IMAC_G5 0x152 /* iMac G5 */ +#define PMAC_TYPE_XSERVE_G5 0x153 /* Xserve G5 */ +#define PMAC_TYPE_UNKNOWN_K2 0x19f /* Any other K2 based */ +#define PMAC_TYPE_UNKNOWN_SHASTA 0x19e /* Any other Shasta based */ + +/* + * Motherboard flags + */ + +#define PMAC_MB_CAN_SLEEP 0x00000001 +#define PMAC_MB_HAS_FW_POWER 0x00000002 +#define PMAC_MB_OLD_CORE99 0x00000004 +#define PMAC_MB_MOBILE 0x00000008 +#define PMAC_MB_MAY_SLEEP 0x00000010 + +/* + * Feature calls supported on pmac + * + */ + +/* + * Use this inline wrapper + */ +struct device_node; + +static inline long pmac_call_feature(int selector, struct device_node* node, + long param, long value) +{ + if (!ppc_md.feature_call || !machine_is(powermac)) + return -ENODEV; + return ppc_md.feature_call(selector, node, param, value); +} + +/* PMAC_FTR_SERIAL_ENABLE (struct device_node* node, int param, int value) + * enable/disable an SCC side. Pass the node corresponding to the + * channel side as a parameter. + * param is the type of port + * if param is ored with PMAC_SCC_FLAG_XMON, then the SCC is locked enabled + * for use by xmon. + */ +#define PMAC_FTR_SCC_ENABLE PMAC_FTR_DEF(0) + #define PMAC_SCC_ASYNC 0 + #define PMAC_SCC_IRDA 1 + #define PMAC_SCC_I2S1 2 + #define PMAC_SCC_FLAG_XMON 0x00001000 + +/* PMAC_FTR_MODEM_ENABLE (struct device_node* node, 0, int value) + * enable/disable the internal modem. + */ +#define PMAC_FTR_MODEM_ENABLE PMAC_FTR_DEF(1) + +/* PMAC_FTR_SWIM3_ENABLE (struct device_node* node, 0,int value) + * enable/disable the swim3 (floppy) cell of a mac-io ASIC + */ +#define PMAC_FTR_SWIM3_ENABLE PMAC_FTR_DEF(2) + +/* PMAC_FTR_MESH_ENABLE (struct device_node* node, 0, int value) + * enable/disable the mesh (scsi) cell of a mac-io ASIC + */ +#define PMAC_FTR_MESH_ENABLE PMAC_FTR_DEF(3) + +/* PMAC_FTR_IDE_ENABLE (struct device_node* node, int busID, int value) + * enable/disable an IDE port of a mac-io ASIC + * pass the busID parameter + */ +#define PMAC_FTR_IDE_ENABLE PMAC_FTR_DEF(4) + +/* PMAC_FTR_IDE_RESET (struct device_node* node, int busID, int value) + * assert(1)/release(0) an IDE reset line (mac-io IDE only) + */ +#define PMAC_FTR_IDE_RESET PMAC_FTR_DEF(5) + +/* PMAC_FTR_BMAC_ENABLE (struct device_node* node, 0, int value) + * enable/disable the bmac (ethernet) cell of a mac-io ASIC, also drive + * it's reset line + */ +#define PMAC_FTR_BMAC_ENABLE PMAC_FTR_DEF(6) + +/* PMAC_FTR_GMAC_ENABLE (struct device_node* node, 0, int value) + * enable/disable the gmac (ethernet) cell of an uninorth ASIC. This + * control the cell's clock. + */ +#define PMAC_FTR_GMAC_ENABLE PMAC_FTR_DEF(7) + +/* PMAC_FTR_GMAC_PHY_RESET (struct device_node* node, 0, 0) + * Perform a HW reset of the PHY connected to a gmac controller. + * Pass the gmac device node, not the PHY node. + */ +#define PMAC_FTR_GMAC_PHY_RESET PMAC_FTR_DEF(8) + +/* PMAC_FTR_SOUND_CHIP_ENABLE (struct device_node* node, 0, int value) + * enable/disable the sound chip, whatever it is and provided it can + * acually be controlled + */ +#define PMAC_FTR_SOUND_CHIP_ENABLE PMAC_FTR_DEF(9) + +/* -- add various tweaks related to sound routing -- */ + +/* PMAC_FTR_AIRPORT_ENABLE (struct device_node* node, 0, int value) + * enable/disable the airport card + */ +#define PMAC_FTR_AIRPORT_ENABLE PMAC_FTR_DEF(10) + +/* PMAC_FTR_RESET_CPU (NULL, int cpu_nr, 0) + * toggle the reset line of a CPU on an uninorth-based SMP machine + */ +#define PMAC_FTR_RESET_CPU PMAC_FTR_DEF(11) + +/* PMAC_FTR_USB_ENABLE (struct device_node* node, 0, int value) + * enable/disable an USB cell, along with the power of the USB "pad" + * on keylargo based machines + */ +#define PMAC_FTR_USB_ENABLE PMAC_FTR_DEF(12) + +/* PMAC_FTR_1394_ENABLE (struct device_node* node, 0, int value) + * enable/disable the firewire cell of an uninorth ASIC. + */ +#define PMAC_FTR_1394_ENABLE PMAC_FTR_DEF(13) + +/* PMAC_FTR_1394_CABLE_POWER (struct device_node* node, 0, int value) + * enable/disable the firewire cable power supply of the uninorth + * firewire cell + */ +#define PMAC_FTR_1394_CABLE_POWER PMAC_FTR_DEF(14) + +/* PMAC_FTR_SLEEP_STATE (struct device_node* node, 0, int value) + * set the sleep state of the motherboard. + * + * Pass -1 as value to query for sleep capability + * Pass 1 to set IOs to sleep + * Pass 0 to set IOs to wake + */ +#define PMAC_FTR_SLEEP_STATE PMAC_FTR_DEF(15) + +/* PMAC_FTR_GET_MB_INFO (NULL, selector, 0) + * + * returns some motherboard infos. + * selector: 0 - model id + * 1 - model flags (capabilities) + * 2 - model name (cast to const char *) + */ +#define PMAC_FTR_GET_MB_INFO PMAC_FTR_DEF(16) +#define PMAC_MB_INFO_MODEL 0 +#define PMAC_MB_INFO_FLAGS 1 +#define PMAC_MB_INFO_NAME 2 + +/* PMAC_FTR_READ_GPIO (NULL, int index, 0) + * + * read a GPIO from a mac-io controller of type KeyLargo or Pangea. + * the value returned is a byte (positive), or a negative error code + */ +#define PMAC_FTR_READ_GPIO PMAC_FTR_DEF(17) + +/* PMAC_FTR_WRITE_GPIO (NULL, int index, int value) + * + * write a GPIO of a mac-io controller of type KeyLargo or Pangea. + */ +#define PMAC_FTR_WRITE_GPIO PMAC_FTR_DEF(18) + +/* PMAC_FTR_ENABLE_MPIC + * + * Enable the MPIC cell + */ +#define PMAC_FTR_ENABLE_MPIC PMAC_FTR_DEF(19) + +/* PMAC_FTR_AACK_DELAY_ENABLE (NULL, int enable, 0) + * + * Enable/disable the AACK delay on the northbridge for systems using DFS + */ +#define PMAC_FTR_AACK_DELAY_ENABLE PMAC_FTR_DEF(20) + +/* PMAC_FTR_DEVICE_CAN_WAKE + * + * Used by video drivers to inform system that they can actually perform + * wakeup from sleep + */ +#define PMAC_FTR_DEVICE_CAN_WAKE PMAC_FTR_DEF(22) + + +/* Don't use those directly, they are for the sake of pmac_setup.c */ +extern long pmac_do_feature_call(unsigned int selector, ...); +extern void pmac_feature_init(void); + +/* Video suspend tweak */ +extern void pmac_set_early_video_resume(void (*proc)(void *data), void *data); +extern void pmac_call_early_video_resume(void); + +#define PMAC_FTR_DEF(x) ((0x6660000) | (x)) + +/* The AGP driver registers itself here */ +extern void pmac_register_agp_pm(struct pci_dev *bridge, + int (*suspend)(struct pci_dev *bridge), + int (*resume)(struct pci_dev *bridge)); + +/* Those are meant to be used by video drivers to deal with AGP + * suspend resume properly + */ +extern void pmac_suspend_agp_for_card(struct pci_dev *dev); +extern void pmac_resume_agp_for_card(struct pci_dev *dev); + +/* + * The part below is for use by macio_asic.c only, do not rely + * on the data structures or constants below in a normal driver + * + */ + +#define MAX_MACIO_CHIPS 2 + +enum { + macio_unknown = 0, + macio_grand_central, + macio_ohare, + macio_ohareII, + macio_heathrow, + macio_gatwick, + macio_paddington, + macio_keylargo, + macio_pangea, + macio_intrepid, + macio_keylargo2, + macio_shasta, +}; + +struct macio_chip +{ + struct device_node *of_node; + int type; + const char *name; + int rev; + volatile u32 __iomem *base; + unsigned long flags; + + /* For use by macio_asic PCI driver */ + struct macio_bus lbus; +}; + +extern struct macio_chip macio_chips[MAX_MACIO_CHIPS]; + +#define MACIO_FLAG_SCCA_ON 0x00000001 +#define MACIO_FLAG_SCCB_ON 0x00000002 +#define MACIO_FLAG_SCC_LOCKED 0x00000004 +#define MACIO_FLAG_AIRPORT_ON 0x00000010 +#define MACIO_FLAG_FW_SUPPORTED 0x00000020 + +extern struct macio_chip* macio_find(struct device_node* child, int type); + +#define MACIO_FCR32(macio, r) ((macio)->base + ((r) >> 2)) +#define MACIO_FCR8(macio, r) (((volatile u8 __iomem *)((macio)->base)) + (r)) + +#define MACIO_IN32(r) (in_le32(MACIO_FCR32(macio,r))) +#define MACIO_OUT32(r,v) (out_le32(MACIO_FCR32(macio,r), (v))) +#define MACIO_BIS(r,v) (MACIO_OUT32((r), MACIO_IN32(r) | (v))) +#define MACIO_BIC(r,v) (MACIO_OUT32((r), MACIO_IN32(r) & ~(v))) +#define MACIO_IN8(r) (in_8(MACIO_FCR8(macio,r))) +#define MACIO_OUT8(r,v) (out_8(MACIO_FCR8(macio,r), (v))) + +/* + * Those are exported by pmac feature for internal use by arch code + * only like the platform function callbacks, do not use directly in drivers + */ +extern spinlock_t feature_lock; +extern struct device_node *uninorth_node; +extern u32 __iomem *uninorth_base; + +/* + * Uninorth reg. access. Note that Uni-N regs are big endian + */ + +#define UN_REG(r) (uninorth_base + ((r) >> 2)) +#define UN_IN(r) (in_be32(UN_REG(r))) +#define UN_OUT(r,v) (out_be32(UN_REG(r), (v))) +#define UN_BIS(r,v) (UN_OUT((r), UN_IN(r) | (v))) +#define UN_BIC(r,v) (UN_OUT((r), UN_IN(r) & ~(v))) + +/* Uninorth variant: + * + * 0 = not uninorth + * 1 = U1.x or U2.x + * 3 = U3 + * 4 = U4 + */ +extern int pmac_get_uninorth_variant(void); + +#endif /* __ASM_POWERPC_PMAC_FEATURE_H */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/pmac_low_i2c.h b/arch/powerpc/include/asm/pmac_low_i2c.h new file mode 100644 index 00000000000..131011bd7e7 --- /dev/null +++ b/arch/powerpc/include/asm/pmac_low_i2c.h @@ -0,0 +1,107 @@ +/* + * include/asm-ppc/pmac_low_i2c.h + * + * Copyright (C) 2003 Ben. Herrenschmidt (benh@kernel.crashing.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ +#ifndef __PMAC_LOW_I2C_H__ +#define __PMAC_LOW_I2C_H__ +#ifdef __KERNEL__ + +/* i2c mode (based on the platform functions format) */ +enum { + pmac_i2c_mode_dumb = 1, + pmac_i2c_mode_std = 2, + pmac_i2c_mode_stdsub = 3, + pmac_i2c_mode_combined = 4, +}; + +/* RW bit in address */ +enum { + pmac_i2c_read = 0x01, + pmac_i2c_write = 0x00 +}; + +/* i2c bus type */ +enum { + pmac_i2c_bus_keywest = 0, + pmac_i2c_bus_pmu = 1, + pmac_i2c_bus_smu = 2, +}; + +/* i2c bus features */ +enum { + /* can_largesub : supports >1 byte subaddresses (SMU only) */ + pmac_i2c_can_largesub = 0x00000001u, + + /* multibus : device node holds multiple busses, bus number is + * encoded in bits 0xff00 of "reg" of a given device + */ + pmac_i2c_multibus = 0x00000002u, +}; + +/* i2c busses in the system */ +struct pmac_i2c_bus; +struct i2c_adapter; + +/* Init, called early during boot */ +extern int pmac_i2c_init(void); + +/* Lookup an i2c bus for a device-node. The node can be either the bus + * node itself or a device below it. In the case of a multibus, the bus + * node itself is the controller node, else, it's a child of the controller + * node + */ +extern struct pmac_i2c_bus *pmac_i2c_find_bus(struct device_node *node); + +/* Get the address for an i2c device. This strips the bus number if + * necessary. The 7 bits address is returned 1 bit right shifted so that the + * direction can be directly ored in + */ +extern u8 pmac_i2c_get_dev_addr(struct device_node *device); + +/* Get infos about a bus */ +extern struct device_node *pmac_i2c_get_controller(struct pmac_i2c_bus *bus); +extern struct device_node *pmac_i2c_get_bus_node(struct pmac_i2c_bus *bus); +extern int pmac_i2c_get_type(struct pmac_i2c_bus *bus); +extern int pmac_i2c_get_flags(struct pmac_i2c_bus *bus); +extern int pmac_i2c_get_channel(struct pmac_i2c_bus *bus); + +/* i2c layer adapter attach/detach */ +extern void pmac_i2c_attach_adapter(struct pmac_i2c_bus *bus, + struct i2c_adapter *adapter); +extern void pmac_i2c_detach_adapter(struct pmac_i2c_bus *bus, + struct i2c_adapter *adapter); +extern struct i2c_adapter *pmac_i2c_get_adapter(struct pmac_i2c_bus *bus); +extern struct pmac_i2c_bus *pmac_i2c_adapter_to_bus(struct i2c_adapter *adapter); + +/* March a device or bus with an i2c adapter structure, to be used by drivers + * to match device-tree nodes with i2c adapters during adapter discovery + * callbacks + */ +extern int pmac_i2c_match_adapter(struct device_node *dev, + struct i2c_adapter *adapter); + + +/* (legacy) Locking functions exposed to i2c-keywest */ +extern int pmac_low_i2c_lock(struct device_node *np); +extern int pmac_low_i2c_unlock(struct device_node *np); + +/* Access functions for platform code */ +extern int pmac_i2c_open(struct pmac_i2c_bus *bus, int polled); +extern void pmac_i2c_close(struct pmac_i2c_bus *bus); +extern int pmac_i2c_setmode(struct pmac_i2c_bus *bus, int mode); +extern int pmac_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize, + u32 subaddr, u8 *data, int len); + +/* Suspend/resume code called by via-pmu directly for now */ +extern void pmac_pfunc_i2c_suspend(void); +extern void pmac_pfunc_i2c_resume(void); + +#endif /* __KERNEL__ */ +#endif /* __PMAC_LOW_I2C_H__ */ diff --git a/arch/powerpc/include/asm/pmac_pfunc.h b/arch/powerpc/include/asm/pmac_pfunc.h new file mode 100644 index 00000000000..1330d6a58c5 --- /dev/null +++ b/arch/powerpc/include/asm/pmac_pfunc.h @@ -0,0 +1,252 @@ +#ifndef __PMAC_PFUNC_H__ +#define __PMAC_PFUNC_H__ + +#include +#include + +/* Flags in command lists */ +#define PMF_FLAGS_ON_INIT 0x80000000u +#define PMF_FLGAS_ON_TERM 0x40000000u +#define PMF_FLAGS_ON_SLEEP 0x20000000u +#define PMF_FLAGS_ON_WAKE 0x10000000u +#define PMF_FLAGS_ON_DEMAND 0x08000000u +#define PMF_FLAGS_INT_GEN 0x04000000u +#define PMF_FLAGS_HIGH_SPEED 0x02000000u +#define PMF_FLAGS_LOW_SPEED 0x01000000u +#define PMF_FLAGS_SIDE_EFFECTS 0x00800000u + +/* + * Arguments to a platform function call. + * + * NOTE: By convention, pointer arguments point to an u32 + */ +struct pmf_args { + union { + u32 v; + u32 *p; + } u[4]; + unsigned int count; +}; + +/* + * A driver capable of interpreting commands provides a handlers + * structure filled with whatever handlers are implemented by this + * driver. Non implemented handlers are left NULL. + * + * PMF_STD_ARGS are the same arguments that are passed to the parser + * and that gets passed back to the various handlers. + * + * Interpreting a given function always start with a begin() call which + * returns an instance data to be passed around subsequent calls, and + * ends with an end() call. This allows the low level driver to implement + * locking policy or per-function instance data. + * + * For interrupt capable functions, irq_enable() is called when a client + * registers, and irq_disable() is called when the last client unregisters + * Note that irq_enable & irq_disable are called within a semaphore held + * by the core, thus you should not try to register yourself to some other + * pmf interrupt during those calls. + */ + +#define PMF_STD_ARGS struct pmf_function *func, void *instdata, \ + struct pmf_args *args + +struct pmf_function; + +struct pmf_handlers { + void * (*begin)(struct pmf_function *func, struct pmf_args *args); + void (*end)(struct pmf_function *func, void *instdata); + + int (*irq_enable)(struct pmf_function *func); + int (*irq_disable)(struct pmf_function *func); + + int (*write_gpio)(PMF_STD_ARGS, u8 value, u8 mask); + int (*read_gpio)(PMF_STD_ARGS, u8 mask, int rshift, u8 xor); + + int (*write_reg32)(PMF_STD_ARGS, u32 offset, u32 value, u32 mask); + int (*read_reg32)(PMF_STD_ARGS, u32 offset); + int (*write_reg16)(PMF_STD_ARGS, u32 offset, u16 value, u16 mask); + int (*read_reg16)(PMF_STD_ARGS, u32 offset); + int (*write_reg8)(PMF_STD_ARGS, u32 offset, u8 value, u8 mask); + int (*read_reg8)(PMF_STD_ARGS, u32 offset); + + int (*delay)(PMF_STD_ARGS, u32 duration); + + int (*wait_reg32)(PMF_STD_ARGS, u32 offset, u32 value, u32 mask); + int (*wait_reg16)(PMF_STD_ARGS, u32 offset, u16 value, u16 mask); + int (*wait_reg8)(PMF_STD_ARGS, u32 offset, u8 value, u8 mask); + + int (*read_i2c)(PMF_STD_ARGS, u32 len); + int (*write_i2c)(PMF_STD_ARGS, u32 len, const u8 *data); + int (*rmw_i2c)(PMF_STD_ARGS, u32 masklen, u32 valuelen, u32 totallen, + const u8 *maskdata, const u8 *valuedata); + + int (*read_cfg)(PMF_STD_ARGS, u32 offset, u32 len); + int (*write_cfg)(PMF_STD_ARGS, u32 offset, u32 len, const u8 *data); + int (*rmw_cfg)(PMF_STD_ARGS, u32 offset, u32 masklen, u32 valuelen, + u32 totallen, const u8 *maskdata, const u8 *valuedata); + + int (*read_i2c_sub)(PMF_STD_ARGS, u8 subaddr, u32 len); + int (*write_i2c_sub)(PMF_STD_ARGS, u8 subaddr, u32 len, const u8 *data); + int (*set_i2c_mode)(PMF_STD_ARGS, int mode); + int (*rmw_i2c_sub)(PMF_STD_ARGS, u8 subaddr, u32 masklen, u32 valuelen, + u32 totallen, const u8 *maskdata, + const u8 *valuedata); + + int (*read_reg32_msrx)(PMF_STD_ARGS, u32 offset, u32 mask, u32 shift, + u32 xor); + int (*read_reg16_msrx)(PMF_STD_ARGS, u32 offset, u32 mask, u32 shift, + u32 xor); + int (*read_reg8_msrx)(PMF_STD_ARGS, u32 offset, u32 mask, u32 shift, + u32 xor); + + int (*write_reg32_slm)(PMF_STD_ARGS, u32 offset, u32 shift, u32 mask); + int (*write_reg16_slm)(PMF_STD_ARGS, u32 offset, u32 shift, u32 mask); + int (*write_reg8_slm)(PMF_STD_ARGS, u32 offset, u32 shift, u32 mask); + + int (*mask_and_compare)(PMF_STD_ARGS, u32 len, const u8 *maskdata, + const u8 *valuedata); + + struct module *owner; +}; + + +/* + * Drivers who expose platform functions register at init time, this + * causes the platform functions for that device node to be parsed in + * advance and associated with the device. The data structures are + * partially public so a driver can walk the list of platform functions + * and eventually inspect the flags + */ +struct pmf_device; + +struct pmf_function { + /* All functions for a given driver are linked */ + struct list_head link; + + /* Function node & driver data */ + struct device_node *node; + void *driver_data; + + /* For internal use by core */ + struct pmf_device *dev; + + /* The name is the "xxx" in "platform-do-xxx", this is how + * platform functions are identified by this code. Some functions + * only operate for a given target, in which case the phandle is + * here (or 0 if the filter doesn't apply) + */ + const char *name; + u32 phandle; + + /* The flags for that function. You can have several functions + * with the same name and different flag + */ + u32 flags; + + /* The actual tokenized function blob */ + const void *data; + unsigned int length; + + /* Interrupt clients */ + struct list_head irq_clients; + + /* Refcounting */ + struct kref ref; +}; + +/* + * For platform functions that are interrupts, one can register + * irq_client structures. You canNOT use the same structure twice + * as it contains a link member. Also, the callback is called with + * a spinlock held, you must not call back into any of the pmf_* functions + * from within that callback + */ +struct pmf_irq_client { + void (*handler)(void *data); + void *data; + struct module *owner; + struct list_head link; + struct pmf_function *func; +}; + + +/* + * Register/Unregister a function-capable driver and its handlers + */ +extern int pmf_register_driver(struct device_node *np, + struct pmf_handlers *handlers, + void *driverdata); + +extern void pmf_unregister_driver(struct device_node *np); + + +/* + * Register/Unregister interrupt clients + */ +extern int pmf_register_irq_client(struct device_node *np, + const char *name, + struct pmf_irq_client *client); + +extern void pmf_unregister_irq_client(struct pmf_irq_client *client); + +/* + * Called by the handlers when an irq happens + */ +extern void pmf_do_irq(struct pmf_function *func); + + +/* + * Low level call to platform functions. + * + * The phandle can filter on the target object for functions that have + * multiple targets, the flags allow you to restrict the call to a given + * combination of flags. + * + * The args array contains as many arguments as is required by the function, + * this is dependent on the function you are calling, unfortunately Apple + * mechanism provides no way to encode that so you have to get it right at + * the call site. Some functions require no args, in which case, you can + * pass NULL. + * + * You can also pass NULL to the name. This will match any function that has + * the appropriate combination of flags & phandle or you can pass 0 to the + * phandle to match any + */ +extern int pmf_do_functions(struct device_node *np, const char *name, + u32 phandle, u32 flags, struct pmf_args *args); + + + +/* + * High level call to a platform function. + * + * This one looks for the platform-xxx first so you should call it to the + * actual target if any. It will fallback to platform-do-xxx if it can't + * find one. It will also exclusively target functions that have + * the "OnDemand" flag. + */ + +extern int pmf_call_function(struct device_node *target, const char *name, + struct pmf_args *args); + + +/* + * For low latency interrupt usage, you can lookup for on-demand functions + * using the functions below + */ + +extern struct pmf_function *pmf_find_function(struct device_node *target, + const char *name); + +extern struct pmf_function * pmf_get_function(struct pmf_function *func); +extern void pmf_put_function(struct pmf_function *func); + +extern int pmf_call_one(struct pmf_function *func, struct pmf_args *args); + + +/* Suspend/resume code called by via-pmu directly for now */ +extern void pmac_pfunc_base_suspend(void); +extern void pmac_pfunc_base_resume(void); + +#endif /* __PMAC_PFUNC_H__ */ diff --git a/arch/powerpc/include/asm/pmc.h b/arch/powerpc/include/asm/pmc.h new file mode 100644 index 00000000000..d6a616a1b3e --- /dev/null +++ b/arch/powerpc/include/asm/pmc.h @@ -0,0 +1,37 @@ +/* + * pmc.h + * Copyright (C) 2004 David Gibson, IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _POWERPC_PMC_H +#define _POWERPC_PMC_H +#ifdef __KERNEL__ + +#include + +typedef void (*perf_irq_t)(struct pt_regs *); +extern perf_irq_t perf_irq; + +int reserve_pmc_hardware(perf_irq_t new_perf_irq); +void release_pmc_hardware(void); + +#ifdef CONFIG_PPC64 +void power4_enable_pmcs(void); +void pasemi_enable_pmcs(void); +#endif + +#endif /* __KERNEL__ */ +#endif /* _POWERPC_PMC_H */ diff --git a/arch/powerpc/include/asm/pmi.h b/arch/powerpc/include/asm/pmi.h new file mode 100644 index 00000000000..b4e91fbf508 --- /dev/null +++ b/arch/powerpc/include/asm/pmi.h @@ -0,0 +1,66 @@ +#ifndef _POWERPC_PMI_H +#define _POWERPC_PMI_H + +/* + * Definitions for talking with PMI device on PowerPC + * + * PMI (Platform Management Interrupt) is a way to communicate + * with the BMC (Baseboard Management Controller) via interrupts. + * Unlike IPMI it is bidirectional and has a low latency. + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 + * + * Author: Christian Krafft + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifdef __KERNEL__ + +#define PMI_TYPE_FREQ_CHANGE 0x01 +#define PMI_TYPE_POWER_BUTTON 0x02 +#define PMI_READ_TYPE 0 +#define PMI_READ_DATA0 1 +#define PMI_READ_DATA1 2 +#define PMI_READ_DATA2 3 +#define PMI_WRITE_TYPE 4 +#define PMI_WRITE_DATA0 5 +#define PMI_WRITE_DATA1 6 +#define PMI_WRITE_DATA2 7 + +#define PMI_ACK 0x80 + +#define PMI_TIMEOUT 100 + +typedef struct { + u8 type; + u8 data0; + u8 data1; + u8 data2; +} pmi_message_t; + +struct pmi_handler { + struct list_head node; + u8 type; + void (*handle_pmi_message) (pmi_message_t); +}; + +int pmi_register_handler(struct pmi_handler *); +void pmi_unregister_handler(struct pmi_handler *); + +int pmi_send_message(pmi_message_t); + +#endif /* __KERNEL__ */ +#endif /* _POWERPC_PMI_H */ diff --git a/arch/powerpc/include/asm/poll.h b/arch/powerpc/include/asm/poll.h new file mode 100644 index 00000000000..c98509d3149 --- /dev/null +++ b/arch/powerpc/include/asm/poll.h @@ -0,0 +1 @@ +#include diff --git a/arch/powerpc/include/asm/posix_types.h b/arch/powerpc/include/asm/posix_types.h new file mode 100644 index 00000000000..c4e396b540d --- /dev/null +++ b/arch/powerpc/include/asm/posix_types.h @@ -0,0 +1,128 @@ +#ifndef _ASM_POWERPC_POSIX_TYPES_H +#define _ASM_POWERPC_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned long __kernel_ino_t; +typedef unsigned int __kernel_mode_t; +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef unsigned int __kernel_uid_t; +typedef unsigned int __kernel_gid_t; +typedef long __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_clock_t; +typedef int __kernel_timer_t; +typedef int __kernel_clockid_t; +typedef long __kernel_suseconds_t; +typedef int __kernel_daddr_t; +typedef char * __kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; +typedef unsigned int __kernel_old_uid_t; +typedef unsigned int __kernel_old_gid_t; + +#ifdef __powerpc64__ +typedef unsigned long __kernel_nlink_t; +typedef int __kernel_ipc_pid_t; +typedef unsigned long __kernel_size_t; +typedef long __kernel_ssize_t; +typedef unsigned long __kernel_old_dev_t; +#else +typedef unsigned short __kernel_nlink_t; +typedef short __kernel_ipc_pid_t; +typedef unsigned int __kernel_size_t; +typedef int __kernel_ssize_t; +typedef unsigned int __kernel_old_dev_t; +#endif + +#ifdef __powerpc64__ +typedef long long __kernel_loff_t; +#else +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif +#endif + +typedef struct { + int val[2]; +} __kernel_fsid_t; + +#ifndef __GNUC__ + +#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d)) +#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d)) +#define __FD_ISSET(d, set) (((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) != 0) +#define __FD_ZERO(set) \ + ((void) memset ((void *) (set), 0, sizeof (__kernel_fd_set))) + +#else /* __GNUC__ */ + +#if defined(__KERNEL__) +/* With GNU C, use inline functions instead so args are evaluated only once: */ + +#undef __FD_SET +static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp) +{ + unsigned long _tmp = fd / __NFDBITS; + unsigned long _rem = fd % __NFDBITS; + fdsetp->fds_bits[_tmp] |= (1UL<<_rem); +} + +#undef __FD_CLR +static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp) +{ + unsigned long _tmp = fd / __NFDBITS; + unsigned long _rem = fd % __NFDBITS; + fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem); +} + +#undef __FD_ISSET +static __inline__ int __FD_ISSET(unsigned long fd, __kernel_fd_set *p) +{ + unsigned long _tmp = fd / __NFDBITS; + unsigned long _rem = fd % __NFDBITS; + return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0; +} + +/* + * This will unroll the loop for the normal constant case (8 ints, + * for a 256-bit fd_set) + */ +#undef __FD_ZERO +static __inline__ void __FD_ZERO(__kernel_fd_set *p) +{ + unsigned long *tmp = (unsigned long *)p->fds_bits; + int i; + + if (__builtin_constant_p(__FDSET_LONGS)) { + switch (__FDSET_LONGS) { + case 16: + tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0; + tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0; + + case 8: + tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0; + + case 4: + tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0; + return; + } + } + i = __FDSET_LONGS; + while (i) { + i--; + *tmp = 0; + tmp++; + } +} + +#endif /* defined(__KERNEL__) */ +#endif /* __GNUC__ */ +#endif /* _ASM_POWERPC_POSIX_TYPES_H */ diff --git a/arch/powerpc/include/asm/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h new file mode 100644 index 00000000000..854ab713f56 --- /dev/null +++ b/arch/powerpc/include/asm/ppc-pci.h @@ -0,0 +1,149 @@ +/* + * c 2001 PPC 64 Team, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_POWERPC_PPC_PCI_H +#define _ASM_POWERPC_PPC_PCI_H +#ifdef __KERNEL__ + +#ifdef CONFIG_PCI + +#include +#include + +extern unsigned long isa_io_base; + +extern void pci_setup_phb_io(struct pci_controller *hose, int primary); +extern void pci_setup_phb_io_dynamic(struct pci_controller *hose, int primary); + + +extern struct list_head hose_list; + +extern void find_and_init_phbs(void); + +extern struct pci_dev *isa_bridge_pcidev; /* may be NULL if no ISA bus */ + +/** Bus Unit ID macros; get low and hi 32-bits of the 64-bit BUID */ +#define BUID_HI(buid) ((buid) >> 32) +#define BUID_LO(buid) ((buid) & 0xffffffff) + +/* PCI device_node operations */ +struct device_node; +typedef void *(*traverse_func)(struct device_node *me, void *data); +void *traverse_pci_devices(struct device_node *start, traverse_func pre, + void *data); + +extern void pci_devs_phb_init(void); +extern void pci_devs_phb_init_dynamic(struct pci_controller *phb); +extern void scan_phb(struct pci_controller *hose); + +/* From rtas_pci.h */ +extern void init_pci_config_tokens (void); +extern unsigned long get_phb_buid (struct device_node *); +extern int rtas_setup_phb(struct pci_controller *phb); + +extern unsigned long pci_probe_only; + +/* ---- EEH internal-use-only related routines ---- */ +#ifdef CONFIG_EEH + +void pci_addr_cache_insert_device(struct pci_dev *dev); +void pci_addr_cache_remove_device(struct pci_dev *dev); +void pci_addr_cache_build(void); +struct pci_dev *pci_get_device_by_addr(unsigned long addr); + +/** + * eeh_slot_error_detail -- record and EEH error condition to the log + * @pdn: pci device node + * @severity: EEH_LOG_TEMP_FAILURE or EEH_LOG_PERM_FAILURE + * + * Obtains the EEH error details from the RTAS subsystem, + * and then logs these details with the RTAS error log system. + */ +#define EEH_LOG_TEMP_FAILURE 1 +#define EEH_LOG_PERM_FAILURE 2 +void eeh_slot_error_detail (struct pci_dn *pdn, int severity); + +/** + * rtas_pci_enable - enable IO transfers for this slot + * @pdn: pci device node + * @function: either EEH_THAW_MMIO or EEH_THAW_DMA + * + * Enable I/O transfers to this slot + */ +#define EEH_THAW_MMIO 2 +#define EEH_THAW_DMA 3 +int rtas_pci_enable(struct pci_dn *pdn, int function); + +/** + * rtas_set_slot_reset -- unfreeze a frozen slot + * @pdn: pci device node + * + * Clear the EEH-frozen condition on a slot. This routine + * does this by asserting the PCI #RST line for 1/8th of + * a second; this routine will sleep while the adapter is + * being reset. + * + * Returns a non-zero value if the reset failed. + */ +int rtas_set_slot_reset (struct pci_dn *); +int eeh_wait_for_slot_status(struct pci_dn *pdn, int max_wait_msecs); + +/** + * eeh_restore_bars - Restore device configuration info. + * @pdn: pci device node + * + * A reset of a PCI device will clear out its config space. + * This routines will restore the config space for this + * device, and is children, to values previously obtained + * from the firmware. + */ +void eeh_restore_bars(struct pci_dn *); + +/** + * rtas_configure_bridge -- firmware initialization of pci bridge + * @pdn: pci device node + * + * Ask the firmware to configure all PCI bridges devices + * located behind the indicated node. Required after a + * pci device reset. Does essentially the same hing as + * eeh_restore_bars, but for brdges, and lets firmware + * do the work. + */ +void rtas_configure_bridge(struct pci_dn *); + +int rtas_write_config(struct pci_dn *, int where, int size, u32 val); +int rtas_read_config(struct pci_dn *, int where, int size, u32 *val); + +/** + * eeh_mark_slot -- set mode flags for pertition endpoint + * @pdn: pci device node + * + * mark and clear slots: find "partition endpoint" PE and set or + * clear the flags for each subnode of the PE. + */ +void eeh_mark_slot (struct device_node *dn, int mode_flag); +void eeh_clear_slot (struct device_node *dn, int mode_flag); + +/** + * find_device_pe -- Find the associated "Partiationable Endpoint" PE + * @pdn: pci device node + */ +struct device_node * find_device_pe(struct device_node *dn); + +void eeh_sysfs_add_device(struct pci_dev *pdev); +void eeh_sysfs_remove_device(struct pci_dev *pdev); + +#endif /* CONFIG_EEH */ + +#else /* CONFIG_PCI */ +static inline void find_and_init_phbs(void) { } +static inline void init_pci_config_tokens(void) { } +#endif /* !CONFIG_PCI */ + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_PPC_PCI_H */ diff --git a/arch/powerpc/include/asm/ppc4xx.h b/arch/powerpc/include/asm/ppc4xx.h new file mode 100644 index 00000000000..033039a80c4 --- /dev/null +++ b/arch/powerpc/include/asm/ppc4xx.h @@ -0,0 +1,18 @@ +/* + * PPC4xx Prototypes and definitions + * + * Copyright 2008 DENX Software Engineering, Stefan Roese + * + * This is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#ifndef __ASM_POWERPC_PPC4xx_H__ +#define __ASM_POWERPC_PPC4xx_H__ + +extern void ppc4xx_reset_system(char *cmd); + +#endif /* __ASM_POWERPC_PPC4xx_H__ */ diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h new file mode 100644 index 00000000000..0966899d974 --- /dev/null +++ b/arch/powerpc/include/asm/ppc_asm.h @@ -0,0 +1,689 @@ +/* + * Copyright (C) 1995-1999 Gary Thomas, Paul Mackerras, Cort Dougan. + */ +#ifndef _ASM_POWERPC_PPC_ASM_H +#define _ASM_POWERPC_PPC_ASM_H + +#include +#include +#include + +#ifndef __ASSEMBLY__ +#error __FILE__ should only be used in assembler files +#else + +#define SZL (BITS_PER_LONG/8) + +/* + * Stuff for accurate CPU time accounting. + * These macros handle transitions between user and system state + * in exception entry and exit and accumulate time to the + * user_time and system_time fields in the paca. + */ + +#ifndef CONFIG_VIRT_CPU_ACCOUNTING +#define ACCOUNT_CPU_USER_ENTRY(ra, rb) +#define ACCOUNT_CPU_USER_EXIT(ra, rb) +#else +#define ACCOUNT_CPU_USER_ENTRY(ra, rb) \ + beq 2f; /* if from kernel mode */ \ +BEGIN_FTR_SECTION; \ + mfspr ra,SPRN_PURR; /* get processor util. reg */ \ +END_FTR_SECTION_IFSET(CPU_FTR_PURR); \ +BEGIN_FTR_SECTION; \ + MFTB(ra); /* or get TB if no PURR */ \ +END_FTR_SECTION_IFCLR(CPU_FTR_PURR); \ + ld rb,PACA_STARTPURR(r13); \ + std ra,PACA_STARTPURR(r13); \ + subf rb,rb,ra; /* subtract start value */ \ + ld ra,PACA_USER_TIME(r13); \ + add ra,ra,rb; /* add on to user time */ \ + std ra,PACA_USER_TIME(r13); \ +2: + +#define ACCOUNT_CPU_USER_EXIT(ra, rb) \ +BEGIN_FTR_SECTION; \ + mfspr ra,SPRN_PURR; /* get processor util. reg */ \ +END_FTR_SECTION_IFSET(CPU_FTR_PURR); \ +BEGIN_FTR_SECTION; \ + MFTB(ra); /* or get TB if no PURR */ \ +END_FTR_SECTION_IFCLR(CPU_FTR_PURR); \ + ld rb,PACA_STARTPURR(r13); \ + std ra,PACA_STARTPURR(r13); \ + subf rb,rb,ra; /* subtract start value */ \ + ld ra,PACA_SYSTEM_TIME(r13); \ + add ra,ra,rb; /* add on to user time */ \ + std ra,PACA_SYSTEM_TIME(r13); +#endif + +/* + * Macros for storing registers into and loading registers from + * exception frames. + */ +#ifdef __powerpc64__ +#define SAVE_GPR(n, base) std n,GPR0+8*(n)(base) +#define REST_GPR(n, base) ld n,GPR0+8*(n)(base) +#define SAVE_NVGPRS(base) SAVE_8GPRS(14, base); SAVE_10GPRS(22, base) +#define REST_NVGPRS(base) REST_8GPRS(14, base); REST_10GPRS(22, base) +#else +#define SAVE_GPR(n, base) stw n,GPR0+4*(n)(base) +#define REST_GPR(n, base) lwz n,GPR0+4*(n)(base) +#define SAVE_NVGPRS(base) SAVE_GPR(13, base); SAVE_8GPRS(14, base); \ + SAVE_10GPRS(22, base) +#define REST_NVGPRS(base) REST_GPR(13, base); REST_8GPRS(14, base); \ + REST_10GPRS(22, base) +#endif + +/* + * Define what the VSX XX1 form instructions will look like, then add + * the 128 bit load store instructions based on that. + */ +#define VSX_XX1(xs, ra, rb) (((xs) & 0x1f) << 21 | ((ra) << 16) | \ + ((rb) << 11) | (((xs) >> 5))) + +#define STXVD2X(xs, ra, rb) .long (0x7c000798 | VSX_XX1((xs), (ra), (rb))) +#define LXVD2X(xs, ra, rb) .long (0x7c000698 | VSX_XX1((xs), (ra), (rb))) + +#define SAVE_2GPRS(n, base) SAVE_GPR(n, base); SAVE_GPR(n+1, base) +#define SAVE_4GPRS(n, base) SAVE_2GPRS(n, base); SAVE_2GPRS(n+2, base) +#define SAVE_8GPRS(n, base) SAVE_4GPRS(n, base); SAVE_4GPRS(n+4, base) +#define SAVE_10GPRS(n, base) SAVE_8GPRS(n, base); SAVE_2GPRS(n+8, base) +#define REST_2GPRS(n, base) REST_GPR(n, base); REST_GPR(n+1, base) +#define REST_4GPRS(n, base) REST_2GPRS(n, base); REST_2GPRS(n+2, base) +#define REST_8GPRS(n, base) REST_4GPRS(n, base); REST_4GPRS(n+4, base) +#define REST_10GPRS(n, base) REST_8GPRS(n, base); REST_2GPRS(n+8, base) + +#define SAVE_FPR(n, base) stfd n,THREAD_FPR0+8*TS_FPRWIDTH*(n)(base) +#define SAVE_2FPRS(n, base) SAVE_FPR(n, base); SAVE_FPR(n+1, base) +#define SAVE_4FPRS(n, base) SAVE_2FPRS(n, base); SAVE_2FPRS(n+2, base) +#define SAVE_8FPRS(n, base) SAVE_4FPRS(n, base); SAVE_4FPRS(n+4, base) +#define SAVE_16FPRS(n, base) SAVE_8FPRS(n, base); SAVE_8FPRS(n+8, base) +#define SAVE_32FPRS(n, base) SAVE_16FPRS(n, base); SAVE_16FPRS(n+16, base) +#define REST_FPR(n, base) lfd n,THREAD_FPR0+8*TS_FPRWIDTH*(n)(base) +#define REST_2FPRS(n, base) REST_FPR(n, base); REST_FPR(n+1, base) +#define REST_4FPRS(n, base) REST_2FPRS(n, base); REST_2FPRS(n+2, base) +#define REST_8FPRS(n, base) REST_4FPRS(n, base); REST_4FPRS(n+4, base) +#define REST_16FPRS(n, base) REST_8FPRS(n, base); REST_8FPRS(n+8, base) +#define REST_32FPRS(n, base) REST_16FPRS(n, base); REST_16FPRS(n+16, base) + +#define SAVE_VR(n,b,base) li b,THREAD_VR0+(16*(n)); stvx n,b,base +#define SAVE_2VRS(n,b,base) SAVE_VR(n,b,base); SAVE_VR(n+1,b,base) +#define SAVE_4VRS(n,b,base) SAVE_2VRS(n,b,base); SAVE_2VRS(n+2,b,base) +#define SAVE_8VRS(n,b,base) SAVE_4VRS(n,b,base); SAVE_4VRS(n+4,b,base) +#define SAVE_16VRS(n,b,base) SAVE_8VRS(n,b,base); SAVE_8VRS(n+8,b,base) +#define SAVE_32VRS(n,b,base) SAVE_16VRS(n,b,base); SAVE_16VRS(n+16,b,base) +#define REST_VR(n,b,base) li b,THREAD_VR0+(16*(n)); lvx n,b,base +#define REST_2VRS(n,b,base) REST_VR(n,b,base); REST_VR(n+1,b,base) +#define REST_4VRS(n,b,base) REST_2VRS(n,b,base); REST_2VRS(n+2,b,base) +#define REST_8VRS(n,b,base) REST_4VRS(n,b,base); REST_4VRS(n+4,b,base) +#define REST_16VRS(n,b,base) REST_8VRS(n,b,base); REST_8VRS(n+8,b,base) +#define REST_32VRS(n,b,base) REST_16VRS(n,b,base); REST_16VRS(n+16,b,base) + +/* Save the lower 32 VSRs in the thread VSR region */ +#define SAVE_VSR(n,b,base) li b,THREAD_VSR0+(16*(n)); STXVD2X(n,b,base) +#define SAVE_2VSRS(n,b,base) SAVE_VSR(n,b,base); SAVE_VSR(n+1,b,base) +#define SAVE_4VSRS(n,b,base) SAVE_2VSRS(n,b,base); SAVE_2VSRS(n+2,b,base) +#define SAVE_8VSRS(n,b,base) SAVE_4VSRS(n,b,base); SAVE_4VSRS(n+4,b,base) +#define SAVE_16VSRS(n,b,base) SAVE_8VSRS(n,b,base); SAVE_8VSRS(n+8,b,base) +#define SAVE_32VSRS(n,b,base) SAVE_16VSRS(n,b,base); SAVE_16VSRS(n+16,b,base) +#define REST_VSR(n,b,base) li b,THREAD_VSR0+(16*(n)); LXVD2X(n,b,base) +#define REST_2VSRS(n,b,base) REST_VSR(n,b,base); REST_VSR(n+1,b,base) +#define REST_4VSRS(n,b,base) REST_2VSRS(n,b,base); REST_2VSRS(n+2,b,base) +#define REST_8VSRS(n,b,base) REST_4VSRS(n,b,base); REST_4VSRS(n+4,b,base) +#define REST_16VSRS(n,b,base) REST_8VSRS(n,b,base); REST_8VSRS(n+8,b,base) +#define REST_32VSRS(n,b,base) REST_16VSRS(n,b,base); REST_16VSRS(n+16,b,base) +/* Save the upper 32 VSRs (32-63) in the thread VSX region (0-31) */ +#define SAVE_VSRU(n,b,base) li b,THREAD_VR0+(16*(n)); STXVD2X(n+32,b,base) +#define SAVE_2VSRSU(n,b,base) SAVE_VSRU(n,b,base); SAVE_VSRU(n+1,b,base) +#define SAVE_4VSRSU(n,b,base) SAVE_2VSRSU(n,b,base); SAVE_2VSRSU(n+2,b,base) +#define SAVE_8VSRSU(n,b,base) SAVE_4VSRSU(n,b,base); SAVE_4VSRSU(n+4,b,base) +#define SAVE_16VSRSU(n,b,base) SAVE_8VSRSU(n,b,base); SAVE_8VSRSU(n+8,b,base) +#define SAVE_32VSRSU(n,b,base) SAVE_16VSRSU(n,b,base); SAVE_16VSRSU(n+16,b,base) +#define REST_VSRU(n,b,base) li b,THREAD_VR0+(16*(n)); LXVD2X(n+32,b,base) +#define REST_2VSRSU(n,b,base) REST_VSRU(n,b,base); REST_VSRU(n+1,b,base) +#define REST_4VSRSU(n,b,base) REST_2VSRSU(n,b,base); REST_2VSRSU(n+2,b,base) +#define REST_8VSRSU(n,b,base) REST_4VSRSU(n,b,base); REST_4VSRSU(n+4,b,base) +#define REST_16VSRSU(n,b,base) REST_8VSRSU(n,b,base); REST_8VSRSU(n+8,b,base) +#define REST_32VSRSU(n,b,base) REST_16VSRSU(n,b,base); REST_16VSRSU(n+16,b,base) + +#define SAVE_EVR(n,s,base) evmergehi s,s,n; stw s,THREAD_EVR0+4*(n)(base) +#define SAVE_2EVRS(n,s,base) SAVE_EVR(n,s,base); SAVE_EVR(n+1,s,base) +#define SAVE_4EVRS(n,s,base) SAVE_2EVRS(n,s,base); SAVE_2EVRS(n+2,s,base) +#define SAVE_8EVRS(n,s,base) SAVE_4EVRS(n,s,base); SAVE_4EVRS(n+4,s,base) +#define SAVE_16EVRS(n,s,base) SAVE_8EVRS(n,s,base); SAVE_8EVRS(n+8,s,base) +#define SAVE_32EVRS(n,s,base) SAVE_16EVRS(n,s,base); SAVE_16EVRS(n+16,s,base) +#define REST_EVR(n,s,base) lwz s,THREAD_EVR0+4*(n)(base); evmergelo n,s,n +#define REST_2EVRS(n,s,base) REST_EVR(n,s,base); REST_EVR(n+1,s,base) +#define REST_4EVRS(n,s,base) REST_2EVRS(n,s,base); REST_2EVRS(n+2,s,base) +#define REST_8EVRS(n,s,base) REST_4EVRS(n,s,base); REST_4EVRS(n+4,s,base) +#define REST_16EVRS(n,s,base) REST_8EVRS(n,s,base); REST_8EVRS(n+8,s,base) +#define REST_32EVRS(n,s,base) REST_16EVRS(n,s,base); REST_16EVRS(n+16,s,base) + +/* Macros to adjust thread priority for hardware multithreading */ +#define HMT_VERY_LOW or 31,31,31 # very low priority +#define HMT_LOW or 1,1,1 +#define HMT_MEDIUM_LOW or 6,6,6 # medium low priority +#define HMT_MEDIUM or 2,2,2 +#define HMT_MEDIUM_HIGH or 5,5,5 # medium high priority +#define HMT_HIGH or 3,3,3 + +/* handle instructions that older assemblers may not know */ +#define RFCI .long 0x4c000066 /* rfci instruction */ +#define RFDI .long 0x4c00004e /* rfdi instruction */ +#define RFMCI .long 0x4c00004c /* rfmci instruction */ + +#ifdef __KERNEL__ +#ifdef CONFIG_PPC64 + +#define XGLUE(a,b) a##b +#define GLUE(a,b) XGLUE(a,b) + +#define _GLOBAL(name) \ + .section ".text"; \ + .align 2 ; \ + .globl name; \ + .globl GLUE(.,name); \ + .section ".opd","aw"; \ +name: \ + .quad GLUE(.,name); \ + .quad .TOC.@tocbase; \ + .quad 0; \ + .previous; \ + .type GLUE(.,name),@function; \ +GLUE(.,name): + +#define _INIT_GLOBAL(name) \ + .section ".text.init.refok"; \ + .align 2 ; \ + .globl name; \ + .globl GLUE(.,name); \ + .section ".opd","aw"; \ +name: \ + .quad GLUE(.,name); \ + .quad .TOC.@tocbase; \ + .quad 0; \ + .previous; \ + .type GLUE(.,name),@function; \ +GLUE(.,name): + +#define _KPROBE(name) \ + .section ".kprobes.text","a"; \ + .align 2 ; \ + .globl name; \ + .globl GLUE(.,name); \ + .section ".opd","aw"; \ +name: \ + .quad GLUE(.,name); \ + .quad .TOC.@tocbase; \ + .quad 0; \ + .previous; \ + .type GLUE(.,name),@function; \ +GLUE(.,name): + +#define _STATIC(name) \ + .section ".text"; \ + .align 2 ; \ + .section ".opd","aw"; \ +name: \ + .quad GLUE(.,name); \ + .quad .TOC.@tocbase; \ + .quad 0; \ + .previous; \ + .type GLUE(.,name),@function; \ +GLUE(.,name): + +#define _INIT_STATIC(name) \ + .section ".text.init.refok"; \ + .align 2 ; \ + .section ".opd","aw"; \ +name: \ + .quad GLUE(.,name); \ + .quad .TOC.@tocbase; \ + .quad 0; \ + .previous; \ + .type GLUE(.,name),@function; \ +GLUE(.,name): + +#else /* 32-bit */ + +#define _ENTRY(n) \ + .globl n; \ +n: + +#define _GLOBAL(n) \ + .text; \ + .stabs __stringify(n:F-1),N_FUN,0,0,n;\ + .globl n; \ +n: + +#define _KPROBE(n) \ + .section ".kprobes.text","a"; \ + .globl n; \ +n: + +#endif + +/* + * LOAD_REG_IMMEDIATE(rn, expr) + * Loads the value of the constant expression 'expr' into register 'rn' + * using immediate instructions only. Use this when it's important not + * to reference other data (i.e. on ppc64 when the TOC pointer is not + * valid). + * + * LOAD_REG_ADDR(rn, name) + * Loads the address of label 'name' into register 'rn'. Use this when + * you don't particularly need immediate instructions only, but you need + * the whole address in one register (e.g. it's a structure address and + * you want to access various offsets within it). On ppc32 this is + * identical to LOAD_REG_IMMEDIATE. + * + * LOAD_REG_ADDRBASE(rn, name) + * ADDROFF(name) + * LOAD_REG_ADDRBASE loads part of the address of label 'name' into + * register 'rn'. ADDROFF(name) returns the remainder of the address as + * a constant expression. ADDROFF(name) is a signed expression < 16 bits + * in size, so is suitable for use directly as an offset in load and store + * instructions. Use this when loading/storing a single word or less as: + * LOAD_REG_ADDRBASE(rX, name) + * ld rY,ADDROFF(name)(rX) + */ +#ifdef __powerpc64__ +#define LOAD_REG_IMMEDIATE(reg,expr) \ + lis (reg),(expr)@highest; \ + ori (reg),(reg),(expr)@higher; \ + rldicr (reg),(reg),32,31; \ + oris (reg),(reg),(expr)@h; \ + ori (reg),(reg),(expr)@l; + +#define LOAD_REG_ADDR(reg,name) \ + ld (reg),name@got(r2) + +#define LOAD_REG_ADDRBASE(reg,name) LOAD_REG_ADDR(reg,name) +#define ADDROFF(name) 0 + +/* offsets for stack frame layout */ +#define LRSAVE 16 + +#else /* 32-bit */ + +#define LOAD_REG_IMMEDIATE(reg,expr) \ + lis (reg),(expr)@ha; \ + addi (reg),(reg),(expr)@l; + +#define LOAD_REG_ADDR(reg,name) LOAD_REG_IMMEDIATE(reg, name) + +#define LOAD_REG_ADDRBASE(reg, name) lis (reg),name@ha +#define ADDROFF(name) name@l + +/* offsets for stack frame layout */ +#define LRSAVE 4 + +#endif + +/* various errata or part fixups */ +#ifdef CONFIG_PPC601_SYNC_FIX +#define SYNC \ +BEGIN_FTR_SECTION \ + sync; \ + isync; \ +END_FTR_SECTION_IFSET(CPU_FTR_601) +#define SYNC_601 \ +BEGIN_FTR_SECTION \ + sync; \ +END_FTR_SECTION_IFSET(CPU_FTR_601) +#define ISYNC_601 \ +BEGIN_FTR_SECTION \ + isync; \ +END_FTR_SECTION_IFSET(CPU_FTR_601) +#else +#define SYNC +#define SYNC_601 +#define ISYNC_601 +#endif + +#ifdef CONFIG_PPC_CELL +#define MFTB(dest) \ +90: mftb dest; \ +BEGIN_FTR_SECTION_NESTED(96); \ + cmpwi dest,0; \ + beq- 90b; \ +END_FTR_SECTION_NESTED(CPU_FTR_CELL_TB_BUG, CPU_FTR_CELL_TB_BUG, 96) +#else +#define MFTB(dest) mftb dest +#endif + +#ifndef CONFIG_SMP +#define TLBSYNC +#else /* CONFIG_SMP */ +/* tlbsync is not implemented on 601 */ +#define TLBSYNC \ +BEGIN_FTR_SECTION \ + tlbsync; \ + sync; \ +END_FTR_SECTION_IFCLR(CPU_FTR_601) +#endif + + +/* + * This instruction is not implemented on the PPC 603 or 601; however, on + * the 403GCX and 405GP tlbia IS defined and tlbie is not. + * All of these instructions exist in the 8xx, they have magical powers, + * and they must be used. + */ + +#if !defined(CONFIG_4xx) && !defined(CONFIG_8xx) +#define tlbia \ + li r4,1024; \ + mtctr r4; \ + lis r4,KERNELBASE@h; \ +0: tlbie r4; \ + addi r4,r4,0x1000; \ + bdnz 0b +#endif + + +#ifdef CONFIG_IBM440EP_ERR42 +#define PPC440EP_ERR42 isync +#else +#define PPC440EP_ERR42 +#endif + + +#if defined(CONFIG_BOOKE) +#define toreal(rd) +#define fromreal(rd) + +/* + * We use addis to ensure compatibility with the "classic" ppc versions of + * these macros, which use rs = 0 to get the tophys offset in rd, rather than + * converting the address in r0, and so this version has to do that too + * (i.e. set register rd to 0 when rs == 0). + */ +#define tophys(rd,rs) \ + addis rd,rs,0 + +#define tovirt(rd,rs) \ + addis rd,rs,0 + +#elif defined(CONFIG_PPC64) +#define toreal(rd) /* we can access c000... in real mode */ +#define fromreal(rd) + +#define tophys(rd,rs) \ + clrldi rd,rs,2 + +#define tovirt(rd,rs) \ + rotldi rd,rs,16; \ + ori rd,rd,((KERNELBASE>>48)&0xFFFF);\ + rotldi rd,rd,48 +#else +/* + * On APUS (Amiga PowerPC cpu upgrade board), we don't know the + * physical base address of RAM at compile time. + */ +#define toreal(rd) tophys(rd,rd) +#define fromreal(rd) tovirt(rd,rd) + +#define tophys(rd,rs) \ +0: addis rd,rs,-KERNELBASE@h; \ + .section ".vtop_fixup","aw"; \ + .align 1; \ + .long 0b; \ + .previous + +#define tovirt(rd,rs) \ +0: addis rd,rs,KERNELBASE@h; \ + .section ".ptov_fixup","aw"; \ + .align 1; \ + .long 0b; \ + .previous +#endif + +#ifdef CONFIG_PPC64 +#define RFI rfid +#define MTMSRD(r) mtmsrd r + +#else +#define FIX_SRR1(ra, rb) +#ifndef CONFIG_40x +#define RFI rfi +#else +#define RFI rfi; b . /* Prevent prefetch past rfi */ +#endif +#define MTMSRD(r) mtmsr r +#define CLR_TOP32(r) +#endif + +#endif /* __KERNEL__ */ + +/* The boring bits... */ + +/* Condition Register Bit Fields */ + +#define cr0 0 +#define cr1 1 +#define cr2 2 +#define cr3 3 +#define cr4 4 +#define cr5 5 +#define cr6 6 +#define cr7 7 + + +/* General Purpose Registers (GPRs) */ + +#define r0 0 +#define r1 1 +#define r2 2 +#define r3 3 +#define r4 4 +#define r5 5 +#define r6 6 +#define r7 7 +#define r8 8 +#define r9 9 +#define r10 10 +#define r11 11 +#define r12 12 +#define r13 13 +#define r14 14 +#define r15 15 +#define r16 16 +#define r17 17 +#define r18 18 +#define r19 19 +#define r20 20 +#define r21 21 +#define r22 22 +#define r23 23 +#define r24 24 +#define r25 25 +#define r26 26 +#define r27 27 +#define r28 28 +#define r29 29 +#define r30 30 +#define r31 31 + + +/* Floating Point Registers (FPRs) */ + +#define fr0 0 +#define fr1 1 +#define fr2 2 +#define fr3 3 +#define fr4 4 +#define fr5 5 +#define fr6 6 +#define fr7 7 +#define fr8 8 +#define fr9 9 +#define fr10 10 +#define fr11 11 +#define fr12 12 +#define fr13 13 +#define fr14 14 +#define fr15 15 +#define fr16 16 +#define fr17 17 +#define fr18 18 +#define fr19 19 +#define fr20 20 +#define fr21 21 +#define fr22 22 +#define fr23 23 +#define fr24 24 +#define fr25 25 +#define fr26 26 +#define fr27 27 +#define fr28 28 +#define fr29 29 +#define fr30 30 +#define fr31 31 + +/* AltiVec Registers (VPRs) */ + +#define vr0 0 +#define vr1 1 +#define vr2 2 +#define vr3 3 +#define vr4 4 +#define vr5 5 +#define vr6 6 +#define vr7 7 +#define vr8 8 +#define vr9 9 +#define vr10 10 +#define vr11 11 +#define vr12 12 +#define vr13 13 +#define vr14 14 +#define vr15 15 +#define vr16 16 +#define vr17 17 +#define vr18 18 +#define vr19 19 +#define vr20 20 +#define vr21 21 +#define vr22 22 +#define vr23 23 +#define vr24 24 +#define vr25 25 +#define vr26 26 +#define vr27 27 +#define vr28 28 +#define vr29 29 +#define vr30 30 +#define vr31 31 + +/* VSX Registers (VSRs) */ + +#define vsr0 0 +#define vsr1 1 +#define vsr2 2 +#define vsr3 3 +#define vsr4 4 +#define vsr5 5 +#define vsr6 6 +#define vsr7 7 +#define vsr8 8 +#define vsr9 9 +#define vsr10 10 +#define vsr11 11 +#define vsr12 12 +#define vsr13 13 +#define vsr14 14 +#define vsr15 15 +#define vsr16 16 +#define vsr17 17 +#define vsr18 18 +#define vsr19 19 +#define vsr20 20 +#define vsr21 21 +#define vsr22 22 +#define vsr23 23 +#define vsr24 24 +#define vsr25 25 +#define vsr26 26 +#define vsr27 27 +#define vsr28 28 +#define vsr29 29 +#define vsr30 30 +#define vsr31 31 +#define vsr32 32 +#define vsr33 33 +#define vsr34 34 +#define vsr35 35 +#define vsr36 36 +#define vsr37 37 +#define vsr38 38 +#define vsr39 39 +#define vsr40 40 +#define vsr41 41 +#define vsr42 42 +#define vsr43 43 +#define vsr44 44 +#define vsr45 45 +#define vsr46 46 +#define vsr47 47 +#define vsr48 48 +#define vsr49 49 +#define vsr50 50 +#define vsr51 51 +#define vsr52 52 +#define vsr53 53 +#define vsr54 54 +#define vsr55 55 +#define vsr56 56 +#define vsr57 57 +#define vsr58 58 +#define vsr59 59 +#define vsr60 60 +#define vsr61 61 +#define vsr62 62 +#define vsr63 63 + +/* SPE Registers (EVPRs) */ + +#define evr0 0 +#define evr1 1 +#define evr2 2 +#define evr3 3 +#define evr4 4 +#define evr5 5 +#define evr6 6 +#define evr7 7 +#define evr8 8 +#define evr9 9 +#define evr10 10 +#define evr11 11 +#define evr12 12 +#define evr13 13 +#define evr14 14 +#define evr15 15 +#define evr16 16 +#define evr17 17 +#define evr18 18 +#define evr19 19 +#define evr20 20 +#define evr21 21 +#define evr22 22 +#define evr23 23 +#define evr24 24 +#define evr25 25 +#define evr26 26 +#define evr27 27 +#define evr28 28 +#define evr29 29 +#define evr30 30 +#define evr31 31 + +/* some stab codes */ +#define N_FUN 36 +#define N_RSYM 64 +#define N_SLINE 68 +#define N_SO 100 + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_PPC_ASM_H */ diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h new file mode 100644 index 00000000000..101ed87f7d8 --- /dev/null +++ b/arch/powerpc/include/asm/processor.h @@ -0,0 +1,314 @@ +#ifndef _ASM_POWERPC_PROCESSOR_H +#define _ASM_POWERPC_PROCESSOR_H + +/* + * Copyright (C) 2001 PPC 64 Team, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include + +#ifdef CONFIG_VSX +#define TS_FPRWIDTH 2 +#else +#define TS_FPRWIDTH 1 +#endif + +#ifndef __ASSEMBLY__ +#include +#include +#include + +/* We do _not_ want to define new machine types at all, those must die + * in favor of using the device-tree + * -- BenH. + */ + +/* PREP sub-platform types see residual.h for these */ +#define _PREP_Motorola 0x01 /* motorola prep */ +#define _PREP_Firm 0x02 /* firmworks prep */ +#define _PREP_IBM 0x00 /* ibm prep */ +#define _PREP_Bull 0x03 /* bull prep */ + +/* CHRP sub-platform types. These are arbitrary */ +#define _CHRP_Motorola 0x04 /* motorola chrp, the cobra */ +#define _CHRP_IBM 0x05 /* IBM chrp, the longtrail and longtrail 2 */ +#define _CHRP_Pegasos 0x06 /* Genesi/bplan's Pegasos and Pegasos2 */ +#define _CHRP_briq 0x07 /* TotalImpact's briQ */ + +#if defined(__KERNEL__) && defined(CONFIG_PPC32) + +extern int _chrp_type; + +#ifdef CONFIG_PPC_PREP + +/* what kind of prep workstation we are */ +extern int _prep_type; + +#endif /* CONFIG_PPC_PREP */ + +#endif /* defined(__KERNEL__) && defined(CONFIG_PPC32) */ + +/* + * Default implementation of macro that returns current + * instruction pointer ("program counter"). + */ +#define current_text_addr() ({ __label__ _l; _l: &&_l;}) + +/* Macros for adjusting thread priority (hardware multi-threading) */ +#define HMT_very_low() asm volatile("or 31,31,31 # very low priority") +#define HMT_low() asm volatile("or 1,1,1 # low priority") +#define HMT_medium_low() asm volatile("or 6,6,6 # medium low priority") +#define HMT_medium() asm volatile("or 2,2,2 # medium priority") +#define HMT_medium_high() asm volatile("or 5,5,5 # medium high priority") +#define HMT_high() asm volatile("or 3,3,3 # high priority") + +#ifdef __KERNEL__ + +extern int have_of; + +struct task_struct; +void start_thread(struct pt_regs *regs, unsigned long fdptr, unsigned long sp); +void release_thread(struct task_struct *); + +/* Prepare to copy thread state - unlazy all lazy status */ +extern void prepare_to_copy(struct task_struct *tsk); + +/* Create a new kernel thread. */ +extern long kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); + +/* Lazy FPU handling on uni-processor */ +extern struct task_struct *last_task_used_math; +extern struct task_struct *last_task_used_altivec; +extern struct task_struct *last_task_used_vsx; +extern struct task_struct *last_task_used_spe; + +#ifdef CONFIG_PPC32 + +#if CONFIG_TASK_SIZE > CONFIG_KERNEL_START +#error User TASK_SIZE overlaps with KERNEL_START address +#endif +#define TASK_SIZE (CONFIG_TASK_SIZE) + +/* This decides where the kernel will search for a free chunk of vm + * space during mmap's. + */ +#define TASK_UNMAPPED_BASE (TASK_SIZE / 8 * 3) +#endif + +#ifdef CONFIG_PPC64 +/* 64-bit user address space is 44-bits (16TB user VM) */ +#define TASK_SIZE_USER64 (0x0000100000000000UL) + +/* + * 32-bit user address space is 4GB - 1 page + * (this 1 page is needed so referencing of 0xFFFFFFFF generates EFAULT + */ +#define TASK_SIZE_USER32 (0x0000000100000000UL - (1*PAGE_SIZE)) + +#define TASK_SIZE_OF(tsk) (test_tsk_thread_flag(tsk, TIF_32BIT) ? \ + TASK_SIZE_USER32 : TASK_SIZE_USER64) +#define TASK_SIZE TASK_SIZE_OF(current) + +/* This decides where the kernel will search for a free chunk of vm + * space during mmap's. + */ +#define TASK_UNMAPPED_BASE_USER32 (PAGE_ALIGN(TASK_SIZE_USER32 / 4)) +#define TASK_UNMAPPED_BASE_USER64 (PAGE_ALIGN(TASK_SIZE_USER64 / 4)) + +#define TASK_UNMAPPED_BASE ((test_thread_flag(TIF_32BIT)) ? \ + TASK_UNMAPPED_BASE_USER32 : TASK_UNMAPPED_BASE_USER64 ) +#endif + +#ifdef __KERNEL__ +#ifdef __powerpc64__ + +#define STACK_TOP_USER64 TASK_SIZE_USER64 +#define STACK_TOP_USER32 TASK_SIZE_USER32 + +#define STACK_TOP (test_thread_flag(TIF_32BIT) ? \ + STACK_TOP_USER32 : STACK_TOP_USER64) + +#define STACK_TOP_MAX STACK_TOP_USER64 + +#else /* __powerpc64__ */ + +#define STACK_TOP TASK_SIZE +#define STACK_TOP_MAX STACK_TOP + +#endif /* __powerpc64__ */ +#endif /* __KERNEL__ */ + +typedef struct { + unsigned long seg; +} mm_segment_t; + +#define TS_FPROFFSET 0 +#define TS_VSRLOWOFFSET 1 +#define TS_FPR(i) fpr[i][TS_FPROFFSET] + +struct thread_struct { + unsigned long ksp; /* Kernel stack pointer */ + unsigned long ksp_limit; /* if ksp <= ksp_limit stack overflow */ + +#ifdef CONFIG_PPC64 + unsigned long ksp_vsid; +#endif + struct pt_regs *regs; /* Pointer to saved register state */ + mm_segment_t fs; /* for get_fs() validation */ +#ifdef CONFIG_PPC32 + void *pgdir; /* root of page-table tree */ +#endif +#if defined(CONFIG_4xx) || defined (CONFIG_BOOKE) + unsigned long dbcr0; /* debug control register values */ + unsigned long dbcr1; +#endif + /* FP and VSX 0-31 register set */ + double fpr[32][TS_FPRWIDTH]; + struct { + + unsigned int pad; + unsigned int val; /* Floating point status */ + } fpscr; + int fpexc_mode; /* floating-point exception mode */ + unsigned int align_ctl; /* alignment handling control */ +#ifdef CONFIG_PPC64 + unsigned long start_tb; /* Start purr when proc switched in */ + unsigned long accum_tb; /* Total accumilated purr for process */ +#endif + unsigned long dabr; /* Data address breakpoint register */ +#ifdef CONFIG_ALTIVEC + /* Complete AltiVec register set */ + vector128 vr[32] __attribute__((aligned(16))); + /* AltiVec status */ + vector128 vscr __attribute__((aligned(16))); + unsigned long vrsave; + int used_vr; /* set if process has used altivec */ +#endif /* CONFIG_ALTIVEC */ +#ifdef CONFIG_VSX + /* VSR status */ + int used_vsr; /* set if process has used altivec */ +#endif /* CONFIG_VSX */ +#ifdef CONFIG_SPE + unsigned long evr[32]; /* upper 32-bits of SPE regs */ + u64 acc; /* Accumulator */ + unsigned long spefscr; /* SPE & eFP status */ + int used_spe; /* set if process has used spe */ +#endif /* CONFIG_SPE */ +}; + +#define ARCH_MIN_TASKALIGN 16 + +#define INIT_SP (sizeof(init_stack) + (unsigned long) &init_stack) +#define INIT_SP_LIMIT \ + (_ALIGN_UP(sizeof(init_thread_info), 16) + (unsigned long) &init_stack) + + +#ifdef CONFIG_PPC32 +#define INIT_THREAD { \ + .ksp = INIT_SP, \ + .ksp_limit = INIT_SP_LIMIT, \ + .fs = KERNEL_DS, \ + .pgdir = swapper_pg_dir, \ + .fpexc_mode = MSR_FE0 | MSR_FE1, \ +} +#else +#define INIT_THREAD { \ + .ksp = INIT_SP, \ + .ksp_limit = INIT_SP_LIMIT, \ + .regs = (struct pt_regs *)INIT_SP - 1, /* XXX bogus, I think */ \ + .fs = KERNEL_DS, \ + .fpr = {{0}}, \ + .fpscr = { .val = 0, }, \ + .fpexc_mode = 0, \ +} +#endif + +/* + * Return saved PC of a blocked thread. For now, this is the "user" PC + */ +#define thread_saved_pc(tsk) \ + ((tsk)->thread.regs? (tsk)->thread.regs->nip: 0) + +#define task_pt_regs(tsk) ((struct pt_regs *)(tsk)->thread.regs) + +unsigned long get_wchan(struct task_struct *p); + +#define KSTK_EIP(tsk) ((tsk)->thread.regs? (tsk)->thread.regs->nip: 0) +#define KSTK_ESP(tsk) ((tsk)->thread.regs? (tsk)->thread.regs->gpr[1]: 0) + +/* Get/set floating-point exception mode */ +#define GET_FPEXC_CTL(tsk, adr) get_fpexc_mode((tsk), (adr)) +#define SET_FPEXC_CTL(tsk, val) set_fpexc_mode((tsk), (val)) + +extern int get_fpexc_mode(struct task_struct *tsk, unsigned long adr); +extern int set_fpexc_mode(struct task_struct *tsk, unsigned int val); + +#define GET_ENDIAN(tsk, adr) get_endian((tsk), (adr)) +#define SET_ENDIAN(tsk, val) set_endian((tsk), (val)) + +extern int get_endian(struct task_struct *tsk, unsigned long adr); +extern int set_endian(struct task_struct *tsk, unsigned int val); + +#define GET_UNALIGN_CTL(tsk, adr) get_unalign_ctl((tsk), (adr)) +#define SET_UNALIGN_CTL(tsk, val) set_unalign_ctl((tsk), (val)) + +extern int get_unalign_ctl(struct task_struct *tsk, unsigned long adr); +extern int set_unalign_ctl(struct task_struct *tsk, unsigned int val); + +static inline unsigned int __unpack_fe01(unsigned long msr_bits) +{ + return ((msr_bits & MSR_FE0) >> 10) | ((msr_bits & MSR_FE1) >> 8); +} + +static inline unsigned long __pack_fe01(unsigned int fpmode) +{ + return ((fpmode << 10) & MSR_FE0) | ((fpmode << 8) & MSR_FE1); +} + +#ifdef CONFIG_PPC64 +#define cpu_relax() do { HMT_low(); HMT_medium(); barrier(); } while (0) +#else +#define cpu_relax() barrier() +#endif + +/* Check that a certain kernel stack pointer is valid in task_struct p */ +int validate_sp(unsigned long sp, struct task_struct *p, + unsigned long nbytes); + +/* + * Prefetch macros. + */ +#define ARCH_HAS_PREFETCH +#define ARCH_HAS_PREFETCHW +#define ARCH_HAS_SPINLOCK_PREFETCH + +static inline void prefetch(const void *x) +{ + if (unlikely(!x)) + return; + + __asm__ __volatile__ ("dcbt 0,%0" : : "r" (x)); +} + +static inline void prefetchw(const void *x) +{ + if (unlikely(!x)) + return; + + __asm__ __volatile__ ("dcbtst 0,%0" : : "r" (x)); +} + +#define spin_lock_prefetch(x) prefetchw(x) + +#ifdef CONFIG_PPC64 +#define HAVE_ARCH_PICK_MMAP_LAYOUT +#endif + +#endif /* __KERNEL__ */ +#endif /* __ASSEMBLY__ */ +#endif /* _ASM_POWERPC_PROCESSOR_H */ diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h new file mode 100644 index 00000000000..eb3bd2e1c7f --- /dev/null +++ b/arch/powerpc/include/asm/prom.h @@ -0,0 +1,356 @@ +#ifndef _POWERPC_PROM_H +#define _POWERPC_PROM_H +#ifdef __KERNEL__ + +/* + * Definitions for talking to the Open Firmware PROM on + * Power Macintosh computers. + * + * Copyright (C) 1996-2005 Paul Mackerras. + * + * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include +#include +#include +#include +#include + +#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT 1 +#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT 1 + +#define of_compat_cmp(s1, s2, l) strcasecmp((s1), (s2)) +#define of_prop_cmp(s1, s2) strcmp((s1), (s2)) +#define of_node_cmp(s1, s2) strcasecmp((s1), (s2)) + +/* Definitions used by the flattened device tree */ +#define OF_DT_HEADER 0xd00dfeed /* marker */ +#define OF_DT_BEGIN_NODE 0x1 /* Start of node, full name */ +#define OF_DT_END_NODE 0x2 /* End node */ +#define OF_DT_PROP 0x3 /* Property: name off, size, + * content */ +#define OF_DT_NOP 0x4 /* nop */ +#define OF_DT_END 0x9 + +#define OF_DT_VERSION 0x10 + +/* + * This is what gets passed to the kernel by prom_init or kexec + * + * The dt struct contains the device tree structure, full pathes and + * property contents. The dt strings contain a separate block with just + * the strings for the property names, and is fully page aligned and + * self contained in a page, so that it can be kept around by the kernel, + * each property name appears only once in this page (cheap compression) + * + * the mem_rsvmap contains a map of reserved ranges of physical memory, + * passing it here instead of in the device-tree itself greatly simplifies + * the job of everybody. It's just a list of u64 pairs (base/size) that + * ends when size is 0 + */ +struct boot_param_header +{ + u32 magic; /* magic word OF_DT_HEADER */ + u32 totalsize; /* total size of DT block */ + u32 off_dt_struct; /* offset to structure */ + u32 off_dt_strings; /* offset to strings */ + u32 off_mem_rsvmap; /* offset to memory reserve map */ + u32 version; /* format version */ + u32 last_comp_version; /* last compatible version */ + /* version 2 fields below */ + u32 boot_cpuid_phys; /* Physical CPU id we're booting on */ + /* version 3 fields below */ + u32 dt_strings_size; /* size of the DT strings block */ + /* version 17 fields below */ + u32 dt_struct_size; /* size of the DT structure block */ +}; + + + +typedef u32 phandle; +typedef u32 ihandle; + +struct property { + char *name; + int length; + void *value; + struct property *next; +}; + +struct device_node { + const char *name; + const char *type; + phandle node; + phandle linux_phandle; + char *full_name; + + struct property *properties; + struct property *deadprops; /* removed properties */ + struct device_node *parent; + struct device_node *child; + struct device_node *sibling; + struct device_node *next; /* next device of same type */ + struct device_node *allnext; /* next in list of all nodes */ + struct proc_dir_entry *pde; /* this node's proc directory */ + struct kref kref; + unsigned long _flags; + void *data; +}; + +extern struct device_node *of_chosen; + +static inline int of_node_check_flag(struct device_node *n, unsigned long flag) +{ + return test_bit(flag, &n->_flags); +} + +static inline void of_node_set_flag(struct device_node *n, unsigned long flag) +{ + set_bit(flag, &n->_flags); +} + + +#define HAVE_ARCH_DEVTREE_FIXUPS + +static inline void set_node_proc_entry(struct device_node *dn, struct proc_dir_entry *de) +{ + dn->pde = de; +} + + +extern struct device_node *of_find_all_nodes(struct device_node *prev); +extern struct device_node *of_node_get(struct device_node *node); +extern void of_node_put(struct device_node *node); + +/* For scanning the flat device-tree at boot time */ +extern int __init of_scan_flat_dt(int (*it)(unsigned long node, + const char *uname, int depth, + void *data), + void *data); +extern void* __init of_get_flat_dt_prop(unsigned long node, const char *name, + unsigned long *size); +extern int __init of_flat_dt_is_compatible(unsigned long node, const char *name); +extern unsigned long __init of_get_flat_dt_root(void); + +/* For updating the device tree at runtime */ +extern void of_attach_node(struct device_node *); +extern void of_detach_node(struct device_node *); + +/* Other Prototypes */ +extern void finish_device_tree(void); +extern void unflatten_device_tree(void); +extern void early_init_devtree(void *); +extern int machine_is_compatible(const char *compat); +extern void print_properties(struct device_node *node); +extern int prom_n_intr_cells(struct device_node* np); +extern void prom_get_irq_senses(unsigned char *senses, int off, int max); +extern int prom_add_property(struct device_node* np, struct property* prop); +extern int prom_remove_property(struct device_node *np, struct property *prop); +extern int prom_update_property(struct device_node *np, + struct property *newprop, + struct property *oldprop); + +#ifdef CONFIG_PPC32 +/* + * PCI <-> OF matching functions + * (XXX should these be here?) + */ +struct pci_bus; +struct pci_dev; +extern int pci_device_from_OF_node(struct device_node *node, + u8* bus, u8* devfn); +extern struct device_node* pci_busdev_to_OF_node(struct pci_bus *, int); +extern struct device_node* pci_device_to_OF_node(struct pci_dev *); +extern void pci_create_OF_bus_map(void); +#endif + +extern struct resource *request_OF_resource(struct device_node* node, + int index, const char* name_postfix); +extern int release_OF_resource(struct device_node* node, int index); + + +/* + * OF address retreival & translation + */ + + +/* Helper to read a big number; size is in cells (not bytes) */ +static inline u64 of_read_number(const u32 *cell, int size) +{ + u64 r = 0; + while (size--) + r = (r << 32) | *(cell++); + return r; +} + +/* Like of_read_number, but we want an unsigned long result */ +#ifdef CONFIG_PPC32 +static inline unsigned long of_read_ulong(const u32 *cell, int size) +{ + return cell[size-1]; +} +#else +#define of_read_ulong(cell, size) of_read_number(cell, size) +#endif + +/* Translate an OF address block into a CPU physical address + */ +extern u64 of_translate_address(struct device_node *np, const u32 *addr); + +/* Translate a DMA address from device space to CPU space */ +extern u64 of_translate_dma_address(struct device_node *dev, + const u32 *in_addr); + +/* Extract an address from a device, returns the region size and + * the address space flags too. The PCI version uses a BAR number + * instead of an absolute index + */ +extern const u32 *of_get_address(struct device_node *dev, int index, + u64 *size, unsigned int *flags); +#ifdef CONFIG_PCI +extern const u32 *of_get_pci_address(struct device_node *dev, int bar_no, + u64 *size, unsigned int *flags); +#else +static inline const u32 *of_get_pci_address(struct device_node *dev, + int bar_no, u64 *size, unsigned int *flags) +{ + return NULL; +} +#endif /* CONFIG_PCI */ + +/* Get an address as a resource. Note that if your address is + * a PIO address, the conversion will fail if the physical address + * can't be internally converted to an IO token with + * pci_address_to_pio(), that is because it's either called to early + * or it can't be matched to any host bridge IO space + */ +extern int of_address_to_resource(struct device_node *dev, int index, + struct resource *r); +#ifdef CONFIG_PCI +extern int of_pci_address_to_resource(struct device_node *dev, int bar, + struct resource *r); +#else +static inline int of_pci_address_to_resource(struct device_node *dev, int bar, + struct resource *r) +{ + return -ENOSYS; +} +#endif /* CONFIG_PCI */ + +/* Parse the ibm,dma-window property of an OF node into the busno, phys and + * size parameters. + */ +void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop, + unsigned long *busno, unsigned long *phys, unsigned long *size); + +extern void kdump_move_device_tree(void); + +/* CPU OF node matching */ +struct device_node *of_get_cpu_node(int cpu, unsigned int *thread); + +/* Get the MAC address */ +extern const void *of_get_mac_address(struct device_node *np); + +/* + * OF interrupt mapping + */ + +/* This structure is returned when an interrupt is mapped. The controller + * field needs to be put() after use + */ + +#define OF_MAX_IRQ_SPEC 4 /* We handle specifiers of at most 4 cells */ + +struct of_irq { + struct device_node *controller; /* Interrupt controller node */ + u32 size; /* Specifier size */ + u32 specifier[OF_MAX_IRQ_SPEC]; /* Specifier copy */ +}; + +/** + * of_irq_map_init - Initialize the irq remapper + * @flags: flags defining workarounds to enable + * + * Some machines have bugs in the device-tree which require certain workarounds + * to be applied. Call this before any interrupt mapping attempts to enable + * those workarounds. + */ +#define OF_IMAP_OLDWORLD_MAC 0x00000001 +#define OF_IMAP_NO_PHANDLE 0x00000002 + +extern void of_irq_map_init(unsigned int flags); + +/** + * of_irq_map_raw - Low level interrupt tree parsing + * @parent: the device interrupt parent + * @intspec: interrupt specifier ("interrupts" property of the device) + * @ointsize: size of the passed in interrupt specifier + * @addr: address specifier (start of "reg" property of the device) + * @out_irq: structure of_irq filled by this function + * + * Returns 0 on success and a negative number on error + * + * This function is a low-level interrupt tree walking function. It + * can be used to do a partial walk with synthetized reg and interrupts + * properties, for example when resolving PCI interrupts when no device + * node exist for the parent. + * + */ + +extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec, + u32 ointsize, const u32 *addr, + struct of_irq *out_irq); + + +/** + * of_irq_map_one - Resolve an interrupt for a device + * @device: the device whose interrupt is to be resolved + * @index: index of the interrupt to resolve + * @out_irq: structure of_irq filled by this function + * + * This function resolves an interrupt, walking the tree, for a given + * device-tree node. It's the high level pendant to of_irq_map_raw(). + * It also implements the workarounds for OldWolrd Macs. + */ +extern int of_irq_map_one(struct device_node *device, int index, + struct of_irq *out_irq); + +/** + * of_irq_map_pci - Resolve the interrupt for a PCI device + * @pdev: the device whose interrupt is to be resolved + * @out_irq: structure of_irq filled by this function + * + * This function resolves the PCI interrupt for a given PCI device. If a + * device-node exists for a given pci_dev, it will use normal OF tree + * walking. If not, it will implement standard swizzling and walk up the + * PCI tree until an device-node is found, at which point it will finish + * resolving using the OF tree walking. + */ +struct pci_dev; +extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq); + +extern int of_irq_to_resource(struct device_node *dev, int index, + struct resource *r); + +/** + * of_iomap - Maps the memory mapped IO for a given device_node + * @device: the device whose io range will be mapped + * @index: index of the io range + * + * Returns a pointer to the mapped memory + */ +extern void __iomem *of_iomap(struct device_node *device, int index); + +/* + * NB: This is here while we transition from using asm/prom.h + * to linux/of.h + */ +#include + +#endif /* __KERNEL__ */ +#endif /* _POWERPC_PROM_H */ diff --git a/arch/powerpc/include/asm/ps3.h b/arch/powerpc/include/asm/ps3.h new file mode 100644 index 00000000000..f9e34c493cb --- /dev/null +++ b/arch/powerpc/include/asm/ps3.h @@ -0,0 +1,519 @@ +/* + * PS3 platform declarations. + * + * Copyright (C) 2006 Sony Computer Entertainment Inc. + * Copyright 2006 Sony Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#if !defined(_ASM_POWERPC_PS3_H) +#define _ASM_POWERPC_PS3_H + +#include +#include +#include +#include "cell-pmu.h" + +union ps3_firmware_version { + u64 raw; + struct { + u16 pad; + u16 major; + u16 minor; + u16 rev; + }; +}; + +void ps3_get_firmware_version(union ps3_firmware_version *v); +int ps3_compare_firmware_version(u16 major, u16 minor, u16 rev); + +/* 'Other OS' area */ + +enum ps3_param_av_multi_out { + PS3_PARAM_AV_MULTI_OUT_NTSC = 0, + PS3_PARAM_AV_MULTI_OUT_PAL_RGB = 1, + PS3_PARAM_AV_MULTI_OUT_PAL_YCBCR = 2, + PS3_PARAM_AV_MULTI_OUT_SECAM = 3, +}; + +enum ps3_param_av_multi_out ps3_os_area_get_av_multi_out(void); + +/* dma routines */ + +enum ps3_dma_page_size { + PS3_DMA_4K = 12U, + PS3_DMA_64K = 16U, + PS3_DMA_1M = 20U, + PS3_DMA_16M = 24U, +}; + +enum ps3_dma_region_type { + PS3_DMA_OTHER = 0, + PS3_DMA_INTERNAL = 2, +}; + +struct ps3_dma_region_ops; + +/** + * struct ps3_dma_region - A per device dma state variables structure + * @did: The HV device id. + * @page_size: The ioc pagesize. + * @region_type: The HV region type. + * @bus_addr: The 'translated' bus address of the region. + * @len: The length in bytes of the region. + * @offset: The offset from the start of memory of the region. + * @ioid: The IOID of the device who owns this region + * @chunk_list: Opaque variable used by the ioc page manager. + * @region_ops: struct ps3_dma_region_ops - dma region operations + */ + +struct ps3_dma_region { + struct ps3_system_bus_device *dev; + /* device variables */ + const struct ps3_dma_region_ops *region_ops; + unsigned char ioid; + enum ps3_dma_page_size page_size; + enum ps3_dma_region_type region_type; + unsigned long len; + unsigned long offset; + + /* driver variables (set by ps3_dma_region_create) */ + unsigned long bus_addr; + struct { + spinlock_t lock; + struct list_head head; + } chunk_list; +}; + +struct ps3_dma_region_ops { + int (*create)(struct ps3_dma_region *); + int (*free)(struct ps3_dma_region *); + int (*map)(struct ps3_dma_region *, + unsigned long virt_addr, + unsigned long len, + unsigned long *bus_addr, + u64 iopte_pp); + int (*unmap)(struct ps3_dma_region *, + unsigned long bus_addr, + unsigned long len); +}; +/** + * struct ps3_dma_region_init - Helper to initialize structure variables + * + * Helper to properly initialize variables prior to calling + * ps3_system_bus_device_register. + */ + +struct ps3_system_bus_device; + +int ps3_dma_region_init(struct ps3_system_bus_device *dev, + struct ps3_dma_region *r, enum ps3_dma_page_size page_size, + enum ps3_dma_region_type region_type, void *addr, unsigned long len); +int ps3_dma_region_create(struct ps3_dma_region *r); +int ps3_dma_region_free(struct ps3_dma_region *r); +int ps3_dma_map(struct ps3_dma_region *r, unsigned long virt_addr, + unsigned long len, unsigned long *bus_addr, + u64 iopte_pp); +int ps3_dma_unmap(struct ps3_dma_region *r, unsigned long bus_addr, + unsigned long len); + +/* mmio routines */ + +enum ps3_mmio_page_size { + PS3_MMIO_4K = 12U, + PS3_MMIO_64K = 16U +}; + +struct ps3_mmio_region_ops; +/** + * struct ps3_mmio_region - a per device mmio state variables structure + * + * Current systems can be supported with a single region per device. + */ + +struct ps3_mmio_region { + struct ps3_system_bus_device *dev; + const struct ps3_mmio_region_ops *mmio_ops; + unsigned long bus_addr; + unsigned long len; + enum ps3_mmio_page_size page_size; + unsigned long lpar_addr; +}; + +struct ps3_mmio_region_ops { + int (*create)(struct ps3_mmio_region *); + int (*free)(struct ps3_mmio_region *); +}; +/** + * struct ps3_mmio_region_init - Helper to initialize structure variables + * + * Helper to properly initialize variables prior to calling + * ps3_system_bus_device_register. + */ + +int ps3_mmio_region_init(struct ps3_system_bus_device *dev, + struct ps3_mmio_region *r, unsigned long bus_addr, unsigned long len, + enum ps3_mmio_page_size page_size); +int ps3_mmio_region_create(struct ps3_mmio_region *r); +int ps3_free_mmio_region(struct ps3_mmio_region *r); +unsigned long ps3_mm_phys_to_lpar(unsigned long phys_addr); + +/* inrerrupt routines */ + +enum ps3_cpu_binding { + PS3_BINDING_CPU_ANY = -1, + PS3_BINDING_CPU_0 = 0, + PS3_BINDING_CPU_1 = 1, +}; + +int ps3_irq_plug_setup(enum ps3_cpu_binding cpu, unsigned long outlet, + unsigned int *virq); +int ps3_irq_plug_destroy(unsigned int virq); +int ps3_event_receive_port_setup(enum ps3_cpu_binding cpu, unsigned int *virq); +int ps3_event_receive_port_destroy(unsigned int virq); +int ps3_send_event_locally(unsigned int virq); + +int ps3_io_irq_setup(enum ps3_cpu_binding cpu, unsigned int interrupt_id, + unsigned int *virq); +int ps3_io_irq_destroy(unsigned int virq); +int ps3_vuart_irq_setup(enum ps3_cpu_binding cpu, void* virt_addr_bmp, + unsigned int *virq); +int ps3_vuart_irq_destroy(unsigned int virq); +int ps3_spe_irq_setup(enum ps3_cpu_binding cpu, unsigned long spe_id, + unsigned int class, unsigned int *virq); +int ps3_spe_irq_destroy(unsigned int virq); + +int ps3_sb_event_receive_port_setup(struct ps3_system_bus_device *dev, + enum ps3_cpu_binding cpu, unsigned int *virq); +int ps3_sb_event_receive_port_destroy(struct ps3_system_bus_device *dev, + unsigned int virq); + +/* lv1 result codes */ + +enum lv1_result { + LV1_SUCCESS = 0, + /* not used -1 */ + LV1_RESOURCE_SHORTAGE = -2, + LV1_NO_PRIVILEGE = -3, + LV1_DENIED_BY_POLICY = -4, + LV1_ACCESS_VIOLATION = -5, + LV1_NO_ENTRY = -6, + LV1_DUPLICATE_ENTRY = -7, + LV1_TYPE_MISMATCH = -8, + LV1_BUSY = -9, + LV1_EMPTY = -10, + LV1_WRONG_STATE = -11, + /* not used -12 */ + LV1_NO_MATCH = -13, + LV1_ALREADY_CONNECTED = -14, + LV1_UNSUPPORTED_PARAMETER_VALUE = -15, + LV1_CONDITION_NOT_SATISFIED = -16, + LV1_ILLEGAL_PARAMETER_VALUE = -17, + LV1_BAD_OPTION = -18, + LV1_IMPLEMENTATION_LIMITATION = -19, + LV1_NOT_IMPLEMENTED = -20, + LV1_INVALID_CLASS_ID = -21, + LV1_CONSTRAINT_NOT_SATISFIED = -22, + LV1_ALIGNMENT_ERROR = -23, + LV1_HARDWARE_ERROR = -24, + LV1_INVALID_DATA_FORMAT = -25, + LV1_INVALID_OPERATION = -26, + LV1_INTERNAL_ERROR = -32768, +}; + +static inline const char* ps3_result(int result) +{ +#if defined(DEBUG) + switch (result) { + case LV1_SUCCESS: + return "LV1_SUCCESS (0)"; + case -1: + return "** unknown result ** (-1)"; + case LV1_RESOURCE_SHORTAGE: + return "LV1_RESOURCE_SHORTAGE (-2)"; + case LV1_NO_PRIVILEGE: + return "LV1_NO_PRIVILEGE (-3)"; + case LV1_DENIED_BY_POLICY: + return "LV1_DENIED_BY_POLICY (-4)"; + case LV1_ACCESS_VIOLATION: + return "LV1_ACCESS_VIOLATION (-5)"; + case LV1_NO_ENTRY: + return "LV1_NO_ENTRY (-6)"; + case LV1_DUPLICATE_ENTRY: + return "LV1_DUPLICATE_ENTRY (-7)"; + case LV1_TYPE_MISMATCH: + return "LV1_TYPE_MISMATCH (-8)"; + case LV1_BUSY: + return "LV1_BUSY (-9)"; + case LV1_EMPTY: + return "LV1_EMPTY (-10)"; + case LV1_WRONG_STATE: + return "LV1_WRONG_STATE (-11)"; + case -12: + return "** unknown result ** (-12)"; + case LV1_NO_MATCH: + return "LV1_NO_MATCH (-13)"; + case LV1_ALREADY_CONNECTED: + return "LV1_ALREADY_CONNECTED (-14)"; + case LV1_UNSUPPORTED_PARAMETER_VALUE: + return "LV1_UNSUPPORTED_PARAMETER_VALUE (-15)"; + case LV1_CONDITION_NOT_SATISFIED: + return "LV1_CONDITION_NOT_SATISFIED (-16)"; + case LV1_ILLEGAL_PARAMETER_VALUE: + return "LV1_ILLEGAL_PARAMETER_VALUE (-17)"; + case LV1_BAD_OPTION: + return "LV1_BAD_OPTION (-18)"; + case LV1_IMPLEMENTATION_LIMITATION: + return "LV1_IMPLEMENTATION_LIMITATION (-19)"; + case LV1_NOT_IMPLEMENTED: + return "LV1_NOT_IMPLEMENTED (-20)"; + case LV1_INVALID_CLASS_ID: + return "LV1_INVALID_CLASS_ID (-21)"; + case LV1_CONSTRAINT_NOT_SATISFIED: + return "LV1_CONSTRAINT_NOT_SATISFIED (-22)"; + case LV1_ALIGNMENT_ERROR: + return "LV1_ALIGNMENT_ERROR (-23)"; + case LV1_HARDWARE_ERROR: + return "LV1_HARDWARE_ERROR (-24)"; + case LV1_INVALID_DATA_FORMAT: + return "LV1_INVALID_DATA_FORMAT (-25)"; + case LV1_INVALID_OPERATION: + return "LV1_INVALID_OPERATION (-26)"; + case LV1_INTERNAL_ERROR: + return "LV1_INTERNAL_ERROR (-32768)"; + default: + BUG(); + return "** unknown result **"; + }; +#else + return ""; +#endif +} + +/* system bus routines */ + +enum ps3_match_id { + PS3_MATCH_ID_EHCI = 1, + PS3_MATCH_ID_OHCI = 2, + PS3_MATCH_ID_GELIC = 3, + PS3_MATCH_ID_AV_SETTINGS = 4, + PS3_MATCH_ID_SYSTEM_MANAGER = 5, + PS3_MATCH_ID_STOR_DISK = 6, + PS3_MATCH_ID_STOR_ROM = 7, + PS3_MATCH_ID_STOR_FLASH = 8, + PS3_MATCH_ID_SOUND = 9, + PS3_MATCH_ID_GRAPHICS = 10, + PS3_MATCH_ID_LPM = 11, +}; + +#define PS3_MODULE_ALIAS_EHCI "ps3:1" +#define PS3_MODULE_ALIAS_OHCI "ps3:2" +#define PS3_MODULE_ALIAS_GELIC "ps3:3" +#define PS3_MODULE_ALIAS_AV_SETTINGS "ps3:4" +#define PS3_MODULE_ALIAS_SYSTEM_MANAGER "ps3:5" +#define PS3_MODULE_ALIAS_STOR_DISK "ps3:6" +#define PS3_MODULE_ALIAS_STOR_ROM "ps3:7" +#define PS3_MODULE_ALIAS_STOR_FLASH "ps3:8" +#define PS3_MODULE_ALIAS_SOUND "ps3:9" +#define PS3_MODULE_ALIAS_GRAPHICS "ps3:10" +#define PS3_MODULE_ALIAS_LPM "ps3:11" + +enum ps3_system_bus_device_type { + PS3_DEVICE_TYPE_IOC0 = 1, + PS3_DEVICE_TYPE_SB, + PS3_DEVICE_TYPE_VUART, + PS3_DEVICE_TYPE_LPM, +}; + +enum ps3_match_sub_id { + /* for PS3_MATCH_ID_GRAPHICS */ + PS3_MATCH_SUB_ID_FB = 1, +}; + +/** + * struct ps3_system_bus_device - a device on the system bus + */ + +struct ps3_system_bus_device { + enum ps3_match_id match_id; + enum ps3_match_sub_id match_sub_id; + enum ps3_system_bus_device_type dev_type; + + u64 bus_id; /* SB */ + u64 dev_id; /* SB */ + unsigned int interrupt_id; /* SB */ + struct ps3_dma_region *d_region; /* SB, IOC0 */ + struct ps3_mmio_region *m_region; /* SB, IOC0*/ + unsigned int port_number; /* VUART */ + struct { /* LPM */ + u64 node_id; + u64 pu_id; + u64 rights; + } lpm; + +/* struct iommu_table *iommu_table; -- waiting for BenH's cleanups */ + struct device core; + void *driver_priv; /* private driver variables */ +}; + +int ps3_open_hv_device(struct ps3_system_bus_device *dev); +int ps3_close_hv_device(struct ps3_system_bus_device *dev); + +/** + * struct ps3_system_bus_driver - a driver for a device on the system bus + */ + +struct ps3_system_bus_driver { + enum ps3_match_id match_id; + enum ps3_match_sub_id match_sub_id; + struct device_driver core; + int (*probe)(struct ps3_system_bus_device *); + int (*remove)(struct ps3_system_bus_device *); + int (*shutdown)(struct ps3_system_bus_device *); +/* int (*suspend)(struct ps3_system_bus_device *, pm_message_t); */ +/* int (*resume)(struct ps3_system_bus_device *); */ +}; + +int ps3_system_bus_device_register(struct ps3_system_bus_device *dev); +int ps3_system_bus_driver_register(struct ps3_system_bus_driver *drv); +void ps3_system_bus_driver_unregister(struct ps3_system_bus_driver *drv); + +static inline struct ps3_system_bus_driver *ps3_drv_to_system_bus_drv( + struct device_driver *_drv) +{ + return container_of(_drv, struct ps3_system_bus_driver, core); +} +static inline struct ps3_system_bus_device *ps3_dev_to_system_bus_dev( + struct device *_dev) +{ + return container_of(_dev, struct ps3_system_bus_device, core); +} +static inline struct ps3_system_bus_driver * + ps3_system_bus_dev_to_system_bus_drv(struct ps3_system_bus_device *_dev) +{ + BUG_ON(!_dev); + BUG_ON(!_dev->core.driver); + return ps3_drv_to_system_bus_drv(_dev->core.driver); +} + +/** + * ps3_system_bus_set_drvdata - + * @dev: device structure + * @data: Data to set + */ + +static inline void ps3_system_bus_set_driver_data( + struct ps3_system_bus_device *dev, void *data) +{ + dev->core.driver_data = data; +} +static inline void *ps3_system_bus_get_driver_data( + struct ps3_system_bus_device *dev) +{ + return dev->core.driver_data; +} + +/* These two need global scope for get_dma_ops(). */ + +extern struct bus_type ps3_system_bus_type; + +/* system manager */ + +struct ps3_sys_manager_ops { + struct ps3_system_bus_device *dev; + void (*power_off)(struct ps3_system_bus_device *dev); + void (*restart)(struct ps3_system_bus_device *dev); +}; + +void ps3_sys_manager_register_ops(const struct ps3_sys_manager_ops *ops); +void __noreturn ps3_sys_manager_power_off(void); +void __noreturn ps3_sys_manager_restart(void); +void __noreturn ps3_sys_manager_halt(void); +int ps3_sys_manager_get_wol(void); +void ps3_sys_manager_set_wol(int state); + +struct ps3_prealloc { + const char *name; + void *address; + unsigned long size; + unsigned long align; +}; + +extern struct ps3_prealloc ps3fb_videomemory; +extern struct ps3_prealloc ps3flash_bounce_buffer; + +/* logical performance monitor */ + +/** + * enum ps3_lpm_rights - Rigths granted by the system policy module. + * + * @PS3_LPM_RIGHTS_USE_LPM: The right to use the lpm. + * @PS3_LPM_RIGHTS_USE_TB: The right to use the internal trace buffer. + */ + +enum ps3_lpm_rights { + PS3_LPM_RIGHTS_USE_LPM = 0x001, + PS3_LPM_RIGHTS_USE_TB = 0x100, +}; + +/** + * enum ps3_lpm_tb_type - Type of trace buffer lv1 should use. + * + * @PS3_LPM_TB_TYPE_NONE: Do not use a trace buffer. + * @PS3_LPM_RIGHTS_USE_TB: Use the lv1 internal trace buffer. Must have + * rights @PS3_LPM_RIGHTS_USE_TB. + */ + +enum ps3_lpm_tb_type { + PS3_LPM_TB_TYPE_NONE = 0, + PS3_LPM_TB_TYPE_INTERNAL = 1, +}; + +int ps3_lpm_open(enum ps3_lpm_tb_type tb_type, void *tb_cache, + u64 tb_cache_size); +int ps3_lpm_close(void); +int ps3_lpm_copy_tb(unsigned long offset, void *buf, unsigned long count, + unsigned long *bytes_copied); +int ps3_lpm_copy_tb_to_user(unsigned long offset, void __user *buf, + unsigned long count, unsigned long *bytes_copied); +void ps3_set_bookmark(u64 bookmark); +void ps3_set_pm_bookmark(u64 tag, u64 incident, u64 th_id); +int ps3_set_signal(u64 rtas_signal_group, u8 signal_bit, u16 sub_unit, + u8 bus_word); + +u32 ps3_read_phys_ctr(u32 cpu, u32 phys_ctr); +void ps3_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val); +u32 ps3_read_ctr(u32 cpu, u32 ctr); +void ps3_write_ctr(u32 cpu, u32 ctr, u32 val); + +u32 ps3_read_pm07_control(u32 cpu, u32 ctr); +void ps3_write_pm07_control(u32 cpu, u32 ctr, u32 val); +u32 ps3_read_pm(u32 cpu, enum pm_reg_name reg); +void ps3_write_pm(u32 cpu, enum pm_reg_name reg, u32 val); + +u32 ps3_get_ctr_size(u32 cpu, u32 phys_ctr); +void ps3_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size); + +void ps3_enable_pm(u32 cpu); +void ps3_disable_pm(u32 cpu); +void ps3_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask); +void ps3_disable_pm_interrupts(u32 cpu); + +u32 ps3_get_and_clear_pm_interrupts(u32 cpu); +void ps3_sync_irq(int node); +u32 ps3_get_hw_thread_id(int cpu); +u64 ps3_get_spe_id(void *arg); + +#endif diff --git a/arch/powerpc/include/asm/ps3av.h b/arch/powerpc/include/asm/ps3av.h new file mode 100644 index 00000000000..fda98715cd3 --- /dev/null +++ b/arch/powerpc/include/asm/ps3av.h @@ -0,0 +1,744 @@ +/* + * PS3 AV backend support. + * + * Copyright (C) 2007 Sony Computer Entertainment Inc. + * Copyright 2007 Sony Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ASM_POWERPC_PS3AV_H_ +#define _ASM_POWERPC_PS3AV_H_ + +/** command for ioctl() **/ +#define PS3AV_VERSION 0x205 /* version of ps3av command */ + +#define PS3AV_CID_AV_INIT 0x00000001 +#define PS3AV_CID_AV_FIN 0x00000002 +#define PS3AV_CID_AV_GET_HW_CONF 0x00000003 +#define PS3AV_CID_AV_GET_MONITOR_INFO 0x00000004 +#define PS3AV_CID_AV_ENABLE_EVENT 0x00000006 +#define PS3AV_CID_AV_DISABLE_EVENT 0x00000007 +#define PS3AV_CID_AV_TV_MUTE 0x0000000a + +#define PS3AV_CID_AV_VIDEO_CS 0x00010001 +#define PS3AV_CID_AV_VIDEO_MUTE 0x00010002 +#define PS3AV_CID_AV_VIDEO_DISABLE_SIG 0x00010003 +#define PS3AV_CID_AV_AUDIO_PARAM 0x00020001 +#define PS3AV_CID_AV_AUDIO_MUTE 0x00020002 +#define PS3AV_CID_AV_HDMI_MODE 0x00040001 + +#define PS3AV_CID_VIDEO_INIT 0x01000001 +#define PS3AV_CID_VIDEO_MODE 0x01000002 +#define PS3AV_CID_VIDEO_FORMAT 0x01000004 +#define PS3AV_CID_VIDEO_PITCH 0x01000005 + +#define PS3AV_CID_AUDIO_INIT 0x02000001 +#define PS3AV_CID_AUDIO_MODE 0x02000002 +#define PS3AV_CID_AUDIO_MUTE 0x02000003 +#define PS3AV_CID_AUDIO_ACTIVE 0x02000004 +#define PS3AV_CID_AUDIO_INACTIVE 0x02000005 +#define PS3AV_CID_AUDIO_SPDIF_BIT 0x02000006 +#define PS3AV_CID_AUDIO_CTRL 0x02000007 + +#define PS3AV_CID_EVENT_UNPLUGGED 0x10000001 +#define PS3AV_CID_EVENT_PLUGGED 0x10000002 +#define PS3AV_CID_EVENT_HDCP_DONE 0x10000003 +#define PS3AV_CID_EVENT_HDCP_FAIL 0x10000004 +#define PS3AV_CID_EVENT_HDCP_AUTH 0x10000005 +#define PS3AV_CID_EVENT_HDCP_ERROR 0x10000006 + +#define PS3AV_CID_AVB_PARAM 0x04000001 + +/* max backend ports */ +#define PS3AV_HDMI_MAX 2 /* HDMI_0 HDMI_1 */ +#define PS3AV_AVMULTI_MAX 1 /* AVMULTI_0 */ +#define PS3AV_AV_PORT_MAX (PS3AV_HDMI_MAX + PS3AV_AVMULTI_MAX) +#define PS3AV_OPT_PORT_MAX 1 /* SPDIF0 */ +#define PS3AV_HEAD_MAX 2 /* HEAD_A HEAD_B */ + +/* num of pkt for PS3AV_CID_AVB_PARAM */ +#define PS3AV_AVB_NUM_VIDEO PS3AV_HEAD_MAX +#define PS3AV_AVB_NUM_AUDIO 0 /* not supported */ +#define PS3AV_AVB_NUM_AV_VIDEO PS3AV_AV_PORT_MAX +#define PS3AV_AVB_NUM_AV_AUDIO PS3AV_HDMI_MAX + +#define PS3AV_MUTE_PORT_MAX 1 /* num of ports in mute pkt */ + +/* event_bit */ +#define PS3AV_CMD_EVENT_BIT_UNPLUGGED (1 << 0) +#define PS3AV_CMD_EVENT_BIT_PLUGGED (1 << 1) +#define PS3AV_CMD_EVENT_BIT_HDCP_DONE (1 << 2) +#define PS3AV_CMD_EVENT_BIT_HDCP_FAIL (1 << 3) +#define PS3AV_CMD_EVENT_BIT_HDCP_REAUTH (1 << 4) +#define PS3AV_CMD_EVENT_BIT_HDCP_TOPOLOGY (1 << 5) + +/* common params */ +/* mute */ +#define PS3AV_CMD_MUTE_OFF 0x0000 +#define PS3AV_CMD_MUTE_ON 0x0001 +/* avport */ +#define PS3AV_CMD_AVPORT_HDMI_0 0x0000 +#define PS3AV_CMD_AVPORT_HDMI_1 0x0001 +#define PS3AV_CMD_AVPORT_AVMULTI_0 0x0010 +#define PS3AV_CMD_AVPORT_SPDIF_0 0x0020 +#define PS3AV_CMD_AVPORT_SPDIF_1 0x0021 + +/* for av backend */ +/* av_mclk */ +#define PS3AV_CMD_AV_MCLK_128 0x0000 +#define PS3AV_CMD_AV_MCLK_256 0x0001 +#define PS3AV_CMD_AV_MCLK_512 0x0003 +/* av_inputlen */ +#define PS3AV_CMD_AV_INPUTLEN_16 0x02 +#define PS3AV_CMD_AV_INPUTLEN_20 0x0a +#define PS3AV_CMD_AV_INPUTLEN_24 0x0b +/* alayout */ +#define PS3AV_CMD_AV_LAYOUT_32 (1 << 0) +#define PS3AV_CMD_AV_LAYOUT_44 (1 << 1) +#define PS3AV_CMD_AV_LAYOUT_48 (1 << 2) +#define PS3AV_CMD_AV_LAYOUT_88 (1 << 3) +#define PS3AV_CMD_AV_LAYOUT_96 (1 << 4) +#define PS3AV_CMD_AV_LAYOUT_176 (1 << 5) +#define PS3AV_CMD_AV_LAYOUT_192 (1 << 6) +/* hdmi_mode */ +#define PS3AV_CMD_AV_HDMI_MODE_NORMAL 0xff +#define PS3AV_CMD_AV_HDMI_HDCP_OFF 0x01 +#define PS3AV_CMD_AV_HDMI_EDID_PASS 0x80 +#define PS3AV_CMD_AV_HDMI_DVI 0x40 + +/* for video module */ +/* video_head */ +#define PS3AV_CMD_VIDEO_HEAD_A 0x0000 +#define PS3AV_CMD_VIDEO_HEAD_B 0x0001 +/* video_cs_out video_cs_in */ +#define PS3AV_CMD_VIDEO_CS_NONE 0x0000 +#define PS3AV_CMD_VIDEO_CS_RGB_8 0x0001 +#define PS3AV_CMD_VIDEO_CS_YUV444_8 0x0002 +#define PS3AV_CMD_VIDEO_CS_YUV422_8 0x0003 +#define PS3AV_CMD_VIDEO_CS_XVYCC_8 0x0004 +#define PS3AV_CMD_VIDEO_CS_RGB_10 0x0005 +#define PS3AV_CMD_VIDEO_CS_YUV444_10 0x0006 +#define PS3AV_CMD_VIDEO_CS_YUV422_10 0x0007 +#define PS3AV_CMD_VIDEO_CS_XVYCC_10 0x0008 +#define PS3AV_CMD_VIDEO_CS_RGB_12 0x0009 +#define PS3AV_CMD_VIDEO_CS_YUV444_12 0x000a +#define PS3AV_CMD_VIDEO_CS_YUV422_12 0x000b +#define PS3AV_CMD_VIDEO_CS_XVYCC_12 0x000c +/* video_vid */ +#define PS3AV_CMD_VIDEO_VID_NONE 0x0000 +#define PS3AV_CMD_VIDEO_VID_480I 0x0001 +#define PS3AV_CMD_VIDEO_VID_576I 0x0003 +#define PS3AV_CMD_VIDEO_VID_480P 0x0005 +#define PS3AV_CMD_VIDEO_VID_576P 0x0006 +#define PS3AV_CMD_VIDEO_VID_1080I_60HZ 0x0007 +#define PS3AV_CMD_VIDEO_VID_1080I_50HZ 0x0008 +#define PS3AV_CMD_VIDEO_VID_720P_60HZ 0x0009 +#define PS3AV_CMD_VIDEO_VID_720P_50HZ 0x000a +#define PS3AV_CMD_VIDEO_VID_1080P_60HZ 0x000b +#define PS3AV_CMD_VIDEO_VID_1080P_50HZ 0x000c +#define PS3AV_CMD_VIDEO_VID_WXGA 0x000d +#define PS3AV_CMD_VIDEO_VID_SXGA 0x000e +#define PS3AV_CMD_VIDEO_VID_WUXGA 0x000f +#define PS3AV_CMD_VIDEO_VID_480I_A 0x0010 +/* video_format */ +#define PS3AV_CMD_VIDEO_FORMAT_BLACK 0x0000 +#define PS3AV_CMD_VIDEO_FORMAT_ARGB_8BIT 0x0007 +/* video_order */ +#define PS3AV_CMD_VIDEO_ORDER_RGB 0x0000 +#define PS3AV_CMD_VIDEO_ORDER_BGR 0x0001 +/* video_fmt */ +#define PS3AV_CMD_VIDEO_FMT_X8R8G8B8 0x0000 +/* video_out_format */ +#define PS3AV_CMD_VIDEO_OUT_FORMAT_RGB_12BIT 0x0000 +/* video_cl_cnv */ +#define PS3AV_CMD_VIDEO_CL_CNV_ENABLE_LUT 0x0000 +#define PS3AV_CMD_VIDEO_CL_CNV_DISABLE_LUT 0x0010 +/* video_sync */ +#define PS3AV_CMD_VIDEO_SYNC_VSYNC 0x0001 +#define PS3AV_CMD_VIDEO_SYNC_CSYNC 0x0004 +#define PS3AV_CMD_VIDEO_SYNC_HSYNC 0x0010 + +/* for audio module */ +/* num_of_ch */ +#define PS3AV_CMD_AUDIO_NUM_OF_CH_2 0x0000 +#define PS3AV_CMD_AUDIO_NUM_OF_CH_3 0x0001 +#define PS3AV_CMD_AUDIO_NUM_OF_CH_4 0x0002 +#define PS3AV_CMD_AUDIO_NUM_OF_CH_5 0x0003 +#define PS3AV_CMD_AUDIO_NUM_OF_CH_6 0x0004 +#define PS3AV_CMD_AUDIO_NUM_OF_CH_7 0x0005 +#define PS3AV_CMD_AUDIO_NUM_OF_CH_8 0x0006 +/* audio_fs */ +#define PS3AV_CMD_AUDIO_FS_32K 0x0001 +#define PS3AV_CMD_AUDIO_FS_44K 0x0002 +#define PS3AV_CMD_AUDIO_FS_48K 0x0003 +#define PS3AV_CMD_AUDIO_FS_88K 0x0004 +#define PS3AV_CMD_AUDIO_FS_96K 0x0005 +#define PS3AV_CMD_AUDIO_FS_176K 0x0006 +#define PS3AV_CMD_AUDIO_FS_192K 0x0007 +/* audio_word_bits */ +#define PS3AV_CMD_AUDIO_WORD_BITS_16 0x0001 +#define PS3AV_CMD_AUDIO_WORD_BITS_20 0x0002 +#define PS3AV_CMD_AUDIO_WORD_BITS_24 0x0003 +/* audio_format */ +#define PS3AV_CMD_AUDIO_FORMAT_PCM 0x0001 +#define PS3AV_CMD_AUDIO_FORMAT_BITSTREAM 0x00ff +/* audio_source */ +#define PS3AV_CMD_AUDIO_SOURCE_SERIAL 0x0000 +#define PS3AV_CMD_AUDIO_SOURCE_SPDIF 0x0001 +/* audio_swap */ +#define PS3AV_CMD_AUDIO_SWAP_0 0x0000 +#define PS3AV_CMD_AUDIO_SWAP_1 0x0000 +/* audio_map */ +#define PS3AV_CMD_AUDIO_MAP_OUTPUT_0 0x0000 +#define PS3AV_CMD_AUDIO_MAP_OUTPUT_1 0x0001 +#define PS3AV_CMD_AUDIO_MAP_OUTPUT_2 0x0002 +#define PS3AV_CMD_AUDIO_MAP_OUTPUT_3 0x0003 +/* audio_layout */ +#define PS3AV_CMD_AUDIO_LAYOUT_2CH 0x0000 +#define PS3AV_CMD_AUDIO_LAYOUT_6CH 0x000b /* LREClr */ +#define PS3AV_CMD_AUDIO_LAYOUT_8CH 0x001f /* LREClrXY */ +/* audio_downmix */ +#define PS3AV_CMD_AUDIO_DOWNMIX_PERMITTED 0x0000 +#define PS3AV_CMD_AUDIO_DOWNMIX_PROHIBITED 0x0001 + +/* audio_port */ +#define PS3AV_CMD_AUDIO_PORT_HDMI_0 ( 1 << 0 ) +#define PS3AV_CMD_AUDIO_PORT_HDMI_1 ( 1 << 1 ) +#define PS3AV_CMD_AUDIO_PORT_AVMULTI_0 ( 1 << 10 ) +#define PS3AV_CMD_AUDIO_PORT_SPDIF_0 ( 1 << 20 ) +#define PS3AV_CMD_AUDIO_PORT_SPDIF_1 ( 1 << 21 ) + +/* audio_ctrl_id */ +#define PS3AV_CMD_AUDIO_CTRL_ID_DAC_RESET 0x0000 +#define PS3AV_CMD_AUDIO_CTRL_ID_DAC_DE_EMPHASIS 0x0001 +#define PS3AV_CMD_AUDIO_CTRL_ID_AVCLK 0x0002 +/* audio_ctrl_data[0] reset */ +#define PS3AV_CMD_AUDIO_CTRL_RESET_NEGATE 0x0000 +#define PS3AV_CMD_AUDIO_CTRL_RESET_ASSERT 0x0001 +/* audio_ctrl_data[0] de-emphasis */ +#define PS3AV_CMD_AUDIO_CTRL_DE_EMPHASIS_OFF 0x0000 +#define PS3AV_CMD_AUDIO_CTRL_DE_EMPHASIS_ON 0x0001 +/* audio_ctrl_data[0] avclk */ +#define PS3AV_CMD_AUDIO_CTRL_AVCLK_22 0x0000 +#define PS3AV_CMD_AUDIO_CTRL_AVCLK_18 0x0001 + +/* av_vid */ +/* do not use these params directly, use vid_video2av */ +#define PS3AV_CMD_AV_VID_480I 0x0000 +#define PS3AV_CMD_AV_VID_480P 0x0001 +#define PS3AV_CMD_AV_VID_720P_60HZ 0x0002 +#define PS3AV_CMD_AV_VID_1080I_60HZ 0x0003 +#define PS3AV_CMD_AV_VID_1080P_60HZ 0x0004 +#define PS3AV_CMD_AV_VID_576I 0x0005 +#define PS3AV_CMD_AV_VID_576P 0x0006 +#define PS3AV_CMD_AV_VID_720P_50HZ 0x0007 +#define PS3AV_CMD_AV_VID_1080I_50HZ 0x0008 +#define PS3AV_CMD_AV_VID_1080P_50HZ 0x0009 +#define PS3AV_CMD_AV_VID_WXGA 0x000a +#define PS3AV_CMD_AV_VID_SXGA 0x000b +#define PS3AV_CMD_AV_VID_WUXGA 0x000c +/* av_cs_out av_cs_in */ +/* use cs_video2av() */ +#define PS3AV_CMD_AV_CS_RGB_8 0x0000 +#define PS3AV_CMD_AV_CS_YUV444_8 0x0001 +#define PS3AV_CMD_AV_CS_YUV422_8 0x0002 +#define PS3AV_CMD_AV_CS_XVYCC_8 0x0003 +#define PS3AV_CMD_AV_CS_RGB_10 0x0004 +#define PS3AV_CMD_AV_CS_YUV444_10 0x0005 +#define PS3AV_CMD_AV_CS_YUV422_10 0x0006 +#define PS3AV_CMD_AV_CS_XVYCC_10 0x0007 +#define PS3AV_CMD_AV_CS_RGB_12 0x0008 +#define PS3AV_CMD_AV_CS_YUV444_12 0x0009 +#define PS3AV_CMD_AV_CS_YUV422_12 0x000a +#define PS3AV_CMD_AV_CS_XVYCC_12 0x000b +#define PS3AV_CMD_AV_CS_8 0x0000 +#define PS3AV_CMD_AV_CS_10 0x0001 +#define PS3AV_CMD_AV_CS_12 0x0002 +/* dither */ +#define PS3AV_CMD_AV_DITHER_OFF 0x0000 +#define PS3AV_CMD_AV_DITHER_ON 0x0001 +#define PS3AV_CMD_AV_DITHER_8BIT 0x0000 +#define PS3AV_CMD_AV_DITHER_10BIT 0x0002 +#define PS3AV_CMD_AV_DITHER_12BIT 0x0004 +/* super_white */ +#define PS3AV_CMD_AV_SUPER_WHITE_OFF 0x0000 +#define PS3AV_CMD_AV_SUPER_WHITE_ON 0x0001 +/* aspect */ +#define PS3AV_CMD_AV_ASPECT_16_9 0x0000 +#define PS3AV_CMD_AV_ASPECT_4_3 0x0001 +/* video_cs_cnv() */ +#define PS3AV_CMD_VIDEO_CS_RGB 0x0001 +#define PS3AV_CMD_VIDEO_CS_YUV422 0x0002 +#define PS3AV_CMD_VIDEO_CS_YUV444 0x0003 + +/* for broadcast automode */ +#define PS3AV_RESBIT_720x480P 0x0003 /* 0x0001 | 0x0002 */ +#define PS3AV_RESBIT_720x576P 0x0003 /* 0x0001 | 0x0002 */ +#define PS3AV_RESBIT_1280x720P 0x0004 +#define PS3AV_RESBIT_1920x1080I 0x0008 +#define PS3AV_RESBIT_1920x1080P 0x4000 +#define PS3AV_RES_MASK_60 (PS3AV_RESBIT_720x480P \ + | PS3AV_RESBIT_1280x720P \ + | PS3AV_RESBIT_1920x1080I \ + | PS3AV_RESBIT_1920x1080P) +#define PS3AV_RES_MASK_50 (PS3AV_RESBIT_720x576P \ + | PS3AV_RESBIT_1280x720P \ + | PS3AV_RESBIT_1920x1080I \ + | PS3AV_RESBIT_1920x1080P) + +/* for VESA automode */ +#define PS3AV_RESBIT_VGA 0x0001 +#define PS3AV_RESBIT_WXGA 0x0002 +#define PS3AV_RESBIT_SXGA 0x0004 +#define PS3AV_RESBIT_WUXGA 0x0008 +#define PS3AV_RES_MASK_VESA (PS3AV_RESBIT_WXGA |\ + PS3AV_RESBIT_SXGA |\ + PS3AV_RESBIT_WUXGA) + +#define PS3AV_MONITOR_TYPE_HDMI 1 /* HDMI */ +#define PS3AV_MONITOR_TYPE_DVI 2 /* DVI */ + + +/* for video mode */ +enum ps3av_mode_num { + PS3AV_MODE_AUTO = 0, + PS3AV_MODE_480I = 1, + PS3AV_MODE_480P = 2, + PS3AV_MODE_720P60 = 3, + PS3AV_MODE_1080I60 = 4, + PS3AV_MODE_1080P60 = 5, + PS3AV_MODE_576I = 6, + PS3AV_MODE_576P = 7, + PS3AV_MODE_720P50 = 8, + PS3AV_MODE_1080I50 = 9, + PS3AV_MODE_1080P50 = 10, + PS3AV_MODE_WXGA = 11, + PS3AV_MODE_SXGA = 12, + PS3AV_MODE_WUXGA = 13, +}; + +#define PS3AV_MODE_MASK 0x000F +#define PS3AV_MODE_HDCP_OFF 0x1000 /* Retail PS3 product doesn't support this */ +#define PS3AV_MODE_DITHER 0x0800 +#define PS3AV_MODE_COLOR 0x0400 +#define PS3AV_MODE_WHITE 0x0200 +#define PS3AV_MODE_FULL 0x0080 +#define PS3AV_MODE_DVI 0x0040 +#define PS3AV_MODE_RGB 0x0020 + + +#define PS3AV_DEFAULT_HDMI_MODE_ID_REG_60 PS3AV_MODE_480P +#define PS3AV_DEFAULT_AVMULTI_MODE_ID_REG_60 PS3AV_MODE_480I +#define PS3AV_DEFAULT_HDMI_MODE_ID_REG_50 PS3AV_MODE_576P +#define PS3AV_DEFAULT_AVMULTI_MODE_ID_REG_50 PS3AV_MODE_576I + +#define PS3AV_REGION_60 0x01 +#define PS3AV_REGION_50 0x02 +#define PS3AV_REGION_RGB 0x10 + +#define get_status(buf) (((__u32 *)buf)[2]) +#define PS3AV_HDR_SIZE 4 /* version + size */ + + +/** command packet structure **/ +struct ps3av_send_hdr { + u16 version; + u16 size; /* size of command packet */ + u32 cid; /* command id */ +}; + +struct ps3av_reply_hdr { + u16 version; + u16 size; + u32 cid; + u32 status; +}; + +/* backend: initialization */ +struct ps3av_pkt_av_init { + struct ps3av_send_hdr send_hdr; + u32 event_bit; +}; + +/* backend: finalize */ +struct ps3av_pkt_av_fin { + struct ps3av_send_hdr send_hdr; + /* recv */ + u32 reserved; +}; + +/* backend: get port */ +struct ps3av_pkt_av_get_hw_conf { + struct ps3av_send_hdr send_hdr; + /* recv */ + u32 status; + u16 num_of_hdmi; /* out: number of hdmi */ + u16 num_of_avmulti; /* out: number of avmulti */ + u16 num_of_spdif; /* out: number of hdmi */ + u16 reserved; +}; + +/* backend: get monitor info */ +struct ps3av_info_resolution { + u32 res_bits; + u32 native; +}; + +struct ps3av_info_cs { + u8 rgb; + u8 yuv444; + u8 yuv422; + u8 reserved; +}; + +struct ps3av_info_color { + u16 red_x; + u16 red_y; + u16 green_x; + u16 green_y; + u16 blue_x; + u16 blue_y; + u16 white_x; + u16 white_y; + u32 gamma; +}; + +struct ps3av_info_audio { + u8 type; + u8 max_num_of_ch; + u8 fs; + u8 sbit; +}; + +struct ps3av_info_monitor { + u8 avport; + u8 monitor_id[10]; + u8 monitor_type; + u8 monitor_name[16]; + struct ps3av_info_resolution res_60; + struct ps3av_info_resolution res_50; + struct ps3av_info_resolution res_other; + struct ps3av_info_resolution res_vesa; + struct ps3av_info_cs cs; + struct ps3av_info_color color; + u8 supported_ai; + u8 speaker_info; + u8 num_of_audio_block; + struct ps3av_info_audio audio[0]; /* 0 or more audio blocks */ + u8 reserved[169]; +} __attribute__ ((packed)); + +struct ps3av_pkt_av_get_monitor_info { + struct ps3av_send_hdr send_hdr; + u16 avport; /* in: avport */ + u16 reserved; + /* recv */ + struct ps3av_info_monitor info; /* out: monitor info */ +}; + +/* backend: enable/disable event */ +struct ps3av_pkt_av_event { + struct ps3av_send_hdr send_hdr; + u32 event_bit; /* in */ +}; + +/* backend: video cs param */ +struct ps3av_pkt_av_video_cs { + struct ps3av_send_hdr send_hdr; + u16 avport; /* in: avport */ + u16 av_vid; /* in: video resolution */ + u16 av_cs_out; /* in: output color space */ + u16 av_cs_in; /* in: input color space */ + u8 dither; /* in: dither bit length */ + u8 bitlen_out; /* in: bit length */ + u8 super_white; /* in: super white */ + u8 aspect; /* in: aspect ratio */ +}; + +/* backend: video mute */ +struct ps3av_av_mute { + u16 avport; /* in: avport */ + u16 mute; /* in: mute on/off */ +}; + +struct ps3av_pkt_av_video_mute { + struct ps3av_send_hdr send_hdr; + struct ps3av_av_mute mute[PS3AV_MUTE_PORT_MAX]; +}; + +/* backend: video disable signal */ +struct ps3av_pkt_av_video_disable_sig { + struct ps3av_send_hdr send_hdr; + u16 avport; /* in: avport */ + u16 reserved; +}; + +/* backend: audio param */ +struct ps3av_audio_info_frame { + struct pb1_bit { + u8 ct:4; + u8 rsv:1; + u8 cc:3; + } pb1; + struct pb2_bit { + u8 rsv:3; + u8 sf:3; + u8 ss:2; + } pb2; + u8 pb3; + u8 pb4; + struct pb5_bit { + u8 dm:1; + u8 lsv:4; + u8 rsv:3; + } pb5; +}; + +struct ps3av_pkt_av_audio_param { + struct ps3av_send_hdr send_hdr; + u16 avport; /* in: avport */ + u16 reserved; + u8 mclk; /* in: audio mclk */ + u8 ns[3]; /* in: audio ns val */ + u8 enable; /* in: audio enable */ + u8 swaplr; /* in: audio swap */ + u8 fifomap; /* in: audio fifomap */ + u8 inputctrl; /* in: audio input ctrl */ + u8 inputlen; /* in: sample bit size */ + u8 layout; /* in: speaker layout param */ + struct ps3av_audio_info_frame info; /* in: info */ + u8 chstat[5]; /* in: ch stat */ +}; + +/* backend: audio_mute */ +struct ps3av_pkt_av_audio_mute { + struct ps3av_send_hdr send_hdr; + struct ps3av_av_mute mute[PS3AV_MUTE_PORT_MAX]; +}; + +/* backend: hdmi_mode */ +struct ps3av_pkt_av_hdmi_mode { + struct ps3av_send_hdr send_hdr; + u8 mode; /* in: hdmi_mode */ + u8 reserved0; + u8 reserved1; + u8 reserved2; +}; + +/* backend: tv_mute */ +struct ps3av_pkt_av_tv_mute { + struct ps3av_send_hdr send_hdr; + u16 avport; /* in: avport HDMI only */ + u16 mute; /* in: mute */ +}; + +/* video: initialize */ +struct ps3av_pkt_video_init { + struct ps3av_send_hdr send_hdr; + /* recv */ + u32 reserved; +}; + +/* video: mode setting */ +struct ps3av_pkt_video_mode { + struct ps3av_send_hdr send_hdr; + u32 video_head; /* in: head */ + u32 reserved; + u32 video_vid; /* in: video resolution */ + u16 reserved1; + u16 width; /* in: width in pixel */ + u16 reserved2; + u16 height; /* in: height in pixel */ + u32 pitch; /* in: line size in byte */ + u32 video_out_format; /* in: out format */ + u32 video_format; /* in: input frame buffer format */ + u8 reserved3; + u8 video_cl_cnv; /* in: color conversion */ + u16 video_order; /* in: input RGB order */ + u32 reserved4; +}; + +/* video: format */ +struct ps3av_pkt_video_format { + struct ps3av_send_hdr send_hdr; + u32 video_head; /* in: head */ + u32 video_format; /* in: frame buffer format */ + u8 reserved; + u8 video_cl_cnv; /* in: color conversion */ + u16 video_order; /* in: input RGB order */ +}; + +/* video: pitch */ +struct ps3av_pkt_video_pitch { + u16 version; + u16 size; /* size of command packet */ + u32 cid; /* command id */ + u32 video_head; /* in: head */ + u32 pitch; /* in: line size in byte */ +}; + +/* audio: initialize */ +struct ps3av_pkt_audio_init { + struct ps3av_send_hdr send_hdr; + /* recv */ + u32 reserved; +}; + +/* audio: mode setting */ +struct ps3av_pkt_audio_mode { + struct ps3av_send_hdr send_hdr; + u8 avport; /* in: avport */ + u8 reserved0[3]; + u32 mask; /* in: mask */ + u32 audio_num_of_ch; /* in: number of ch */ + u32 audio_fs; /* in: sampling freq */ + u32 audio_word_bits; /* in: sample bit size */ + u32 audio_format; /* in: audio output format */ + u32 audio_source; /* in: audio source */ + u8 audio_enable[4]; /* in: audio enable */ + u8 audio_swap[4]; /* in: audio swap */ + u8 audio_map[4]; /* in: audio map */ + u32 audio_layout; /* in: speaker layout */ + u32 audio_downmix; /* in: audio downmix permission */ + u32 audio_downmix_level; + u8 audio_cs_info[8]; /* in: IEC channel status */ +}; + +/* audio: mute */ +struct ps3av_audio_mute { + u8 avport; /* in: opt_port optical */ + u8 reserved[3]; + u32 mute; /* in: mute */ +}; + +struct ps3av_pkt_audio_mute { + struct ps3av_send_hdr send_hdr; + struct ps3av_audio_mute mute[PS3AV_OPT_PORT_MAX]; +}; + +/* audio: active/inactive */ +struct ps3av_pkt_audio_active { + struct ps3av_send_hdr send_hdr; + u32 audio_port; /* in: audio active/inactive port */ +}; + +/* audio: SPDIF user bit */ +struct ps3av_pkt_audio_spdif_bit { + u16 version; + u16 size; /* size of command packet */ + u32 cid; /* command id */ + u8 avport; /* in: avport SPDIF only */ + u8 reserved[3]; + u32 audio_port; /* in: SPDIF only */ + u32 spdif_bit_data[12]; /* in: user bit data */ +}; + +/* audio: audio control */ +struct ps3av_pkt_audio_ctrl { + u16 version; + u16 size; /* size of command packet */ + u32 cid; /* command id */ + u32 audio_ctrl_id; /* in: control id */ + u32 audio_ctrl_data[4]; /* in: control data */ +}; + +/* avb:param */ +#define PS3AV_PKT_AVB_PARAM_MAX_BUF_SIZE \ + (PS3AV_AVB_NUM_VIDEO*sizeof(struct ps3av_pkt_video_mode) + \ + PS3AV_AVB_NUM_AUDIO*sizeof(struct ps3av_pkt_audio_mode) + \ + PS3AV_AVB_NUM_AV_VIDEO*sizeof(struct ps3av_pkt_av_video_cs) + \ + PS3AV_AVB_NUM_AV_AUDIO*sizeof(struct ps3av_pkt_av_audio_param)) + +struct ps3av_pkt_avb_param { + struct ps3av_send_hdr send_hdr; + u16 num_of_video_pkt; + u16 num_of_audio_pkt; + u16 num_of_av_video_pkt; + u16 num_of_av_audio_pkt; + /* + * The actual buffer layout depends on the fields above: + * + * struct ps3av_pkt_video_mode video[num_of_video_pkt]; + * struct ps3av_pkt_audio_mode audio[num_of_audio_pkt]; + * struct ps3av_pkt_av_video_cs av_video[num_of_av_video_pkt]; + * struct ps3av_pkt_av_audio_param av_audio[num_of_av_audio_pkt]; + */ + u8 buf[PS3AV_PKT_AVB_PARAM_MAX_BUF_SIZE]; +}; + + +/** command status **/ +#define PS3AV_STATUS_SUCCESS 0x0000 /* success */ +#define PS3AV_STATUS_RECEIVE_VUART_ERROR 0x0001 /* receive vuart error */ +#define PS3AV_STATUS_SYSCON_COMMUNICATE_FAIL 0x0002 /* syscon communication error */ +#define PS3AV_STATUS_INVALID_COMMAND 0x0003 /* obsolete invalid CID */ +#define PS3AV_STATUS_INVALID_PORT 0x0004 /* invalid port number */ +#define PS3AV_STATUS_INVALID_VID 0x0005 /* invalid video format */ +#define PS3AV_STATUS_INVALID_COLOR_SPACE 0x0006 /* invalid video colose space */ +#define PS3AV_STATUS_INVALID_FS 0x0007 /* invalid audio sampling freq */ +#define PS3AV_STATUS_INVALID_AUDIO_CH 0x0008 /* invalid audio channel number */ +#define PS3AV_STATUS_UNSUPPORTED_VERSION 0x0009 /* version mismatch */ +#define PS3AV_STATUS_INVALID_SAMPLE_SIZE 0x000a /* invalid audio sample bit size */ +#define PS3AV_STATUS_FAILURE 0x000b /* other failures */ +#define PS3AV_STATUS_UNSUPPORTED_COMMAND 0x000c /* unsupported cid */ +#define PS3AV_STATUS_BUFFER_OVERFLOW 0x000d /* write buffer overflow */ +#define PS3AV_STATUS_INVALID_VIDEO_PARAM 0x000e /* invalid video param */ +#define PS3AV_STATUS_NO_SEL 0x000f /* not exist selector */ +#define PS3AV_STATUS_INVALID_AV_PARAM 0x0010 /* invalid backend param */ +#define PS3AV_STATUS_INVALID_AUDIO_PARAM 0x0011 /* invalid audio param */ +#define PS3AV_STATUS_UNSUPPORTED_HDMI_MODE 0x0012 /* unsupported hdmi mode */ +#define PS3AV_STATUS_NO_SYNC_HEAD 0x0013 /* sync head failed */ + +extern void ps3av_set_hdr(u32, u16, struct ps3av_send_hdr *); +extern int ps3av_do_pkt(u32, u16, size_t, struct ps3av_send_hdr *); + +extern int ps3av_cmd_init(void); +extern int ps3av_cmd_fin(void); +extern int ps3av_cmd_av_video_mute(int, u32 *, u32); +extern int ps3av_cmd_av_video_disable_sig(u32); +extern int ps3av_cmd_av_tv_mute(u32, u32); +extern int ps3av_cmd_enable_event(void); +extern int ps3av_cmd_av_hdmi_mode(u8); +extern u32 ps3av_cmd_set_av_video_cs(void *, u32, int, int, int, u32); +extern u32 ps3av_cmd_set_video_mode(void *, u32, int, int, u32); +extern int ps3av_cmd_video_format_black(u32, u32, u32); +extern int ps3av_cmd_av_audio_mute(int, u32 *, u32); +extern u32 ps3av_cmd_set_av_audio_param(void *, u32, + const struct ps3av_pkt_audio_mode *, + u32); +extern void ps3av_cmd_set_audio_mode(struct ps3av_pkt_audio_mode *, u32, u32, + u32, u32, u32, u32); +extern int ps3av_cmd_audio_mode(struct ps3av_pkt_audio_mode *); +extern int ps3av_cmd_audio_mute(int, u32 *, u32); +extern int ps3av_cmd_audio_active(int, u32); +extern int ps3av_cmd_avb_param(struct ps3av_pkt_avb_param *, u32); +extern int ps3av_cmd_av_get_hw_conf(struct ps3av_pkt_av_get_hw_conf *); +extern int ps3av_cmd_video_get_monitor_info(struct ps3av_pkt_av_get_monitor_info *, + u32); + +extern int ps3av_set_video_mode(u32); +extern int ps3av_set_audio_mode(u32, u32, u32, u32, u32); +extern int ps3av_get_auto_mode(void); +extern int ps3av_get_mode(void); +extern int ps3av_video_mode2res(u32, u32 *, u32 *); +extern int ps3av_video_mute(int); +extern int ps3av_audio_mute(int); +extern int ps3av_dev_open(void); +extern int ps3av_dev_close(void); +extern void ps3av_register_flip_ctl(void (*flip_ctl)(int on, void *data), + void *flip_data); +extern void ps3av_flip_ctl(int on); + +#endif /* _ASM_POWERPC_PS3AV_H_ */ diff --git a/arch/powerpc/include/asm/ps3fb.h b/arch/powerpc/include/asm/ps3fb.h new file mode 100644 index 00000000000..3f121fe4010 --- /dev/null +++ b/arch/powerpc/include/asm/ps3fb.h @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2006 Sony Computer Entertainment Inc. + * Copyright 2006, 2007 Sony Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published + * by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef _ASM_POWERPC_PS3FB_H_ +#define _ASM_POWERPC_PS3FB_H_ + +#include + +/* ioctl */ +#define PS3FB_IOCTL_SETMODE _IOW('r', 1, int) /* set video mode */ +#define PS3FB_IOCTL_GETMODE _IOR('r', 2, int) /* get video mode */ +#define PS3FB_IOCTL_SCREENINFO _IOR('r', 3, int) /* get screen info */ +#define PS3FB_IOCTL_ON _IO('r', 4) /* use IOCTL_FSEL */ +#define PS3FB_IOCTL_OFF _IO('r', 5) /* return to normal-flip */ +#define PS3FB_IOCTL_FSEL _IOW('r', 6, int) /* blit and flip request */ + +#ifndef FBIO_WAITFORVSYNC +#define FBIO_WAITFORVSYNC _IOW('F', 0x20, __u32) /* wait for vsync */ +#endif + +struct ps3fb_ioctl_res { + __u32 xres; /* frame buffer x_size */ + __u32 yres; /* frame buffer y_size */ + __u32 xoff; /* margine x */ + __u32 yoff; /* margine y */ + __u32 num_frames; /* num of frame buffers */ +}; + +#endif /* _ASM_POWERPC_PS3FB_H_ */ diff --git a/arch/powerpc/include/asm/ps3stor.h b/arch/powerpc/include/asm/ps3stor.h new file mode 100644 index 00000000000..6fcaf714fa5 --- /dev/null +++ b/arch/powerpc/include/asm/ps3stor.h @@ -0,0 +1,71 @@ +/* + * PS3 Storage Devices + * + * Copyright (C) 2007 Sony Computer Entertainment Inc. + * Copyright 2007 Sony Corp. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published + * by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef _ASM_POWERPC_PS3STOR_H_ +#define _ASM_POWERPC_PS3STOR_H_ + +#include + +#include + + +struct ps3_storage_region { + unsigned int id; + u64 start; + u64 size; +}; + +struct ps3_storage_device { + struct ps3_system_bus_device sbd; + + struct ps3_dma_region dma_region; + unsigned int irq; + u64 blk_size; + + u64 tag; + u64 lv1_status; + struct completion done; + + unsigned long bounce_size; + void *bounce_buf; + u64 bounce_lpar; + dma_addr_t bounce_dma; + + unsigned int num_regions; + unsigned long accessible_regions; + unsigned int region_idx; /* first accessible region */ + struct ps3_storage_region regions[0]; /* Must be last */ +}; + +static inline struct ps3_storage_device *to_ps3_storage_device(struct device *dev) +{ + return container_of(dev, struct ps3_storage_device, sbd.core); +} + +extern int ps3stor_setup(struct ps3_storage_device *dev, + irq_handler_t handler); +extern void ps3stor_teardown(struct ps3_storage_device *dev); +extern u64 ps3stor_read_write_sectors(struct ps3_storage_device *dev, u64 lpar, + u64 start_sector, u64 sectors, + int write); +extern u64 ps3stor_send_command(struct ps3_storage_device *dev, u64 cmd, + u64 arg1, u64 arg2, u64 arg3, u64 arg4); + +#endif /* _ASM_POWERPC_PS3STOR_H_ */ diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h new file mode 100644 index 00000000000..734e0754fb9 --- /dev/null +++ b/arch/powerpc/include/asm/ptrace.h @@ -0,0 +1,293 @@ +#ifndef _ASM_POWERPC_PTRACE_H +#define _ASM_POWERPC_PTRACE_H + +/* + * Copyright (C) 2001 PPC64 Team, IBM Corp + * + * This struct defines the way the registers are stored on the + * kernel stack during a system call or other kernel entry. + * + * this should only contain volatile regs + * since we can keep non-volatile in the thread_struct + * should set this up when only volatiles are saved + * by intr code. + * + * Since this is going on the stack, *CARE MUST BE TAKEN* to insure + * that the overall structure is a multiple of 16 bytes in length. + * + * Note that the offsets of the fields in this struct correspond with + * the PT_* values below. This simplifies arch/powerpc/kernel/ptrace.c. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef __ASSEMBLY__ + +struct pt_regs { + unsigned long gpr[32]; + unsigned long nip; + unsigned long msr; + unsigned long orig_gpr3; /* Used for restarting system calls */ + unsigned long ctr; + unsigned long link; + unsigned long xer; + unsigned long ccr; +#ifdef __powerpc64__ + unsigned long softe; /* Soft enabled/disabled */ +#else + unsigned long mq; /* 601 only (not used at present) */ + /* Used on APUS to hold IPL value. */ +#endif + unsigned long trap; /* Reason for being here */ + /* N.B. for critical exceptions on 4xx, the dar and dsisr + fields are overloaded to hold srr0 and srr1. */ + unsigned long dar; /* Fault registers */ + unsigned long dsisr; /* on 4xx/Book-E used for ESR */ + unsigned long result; /* Result of a system call */ +}; + +#endif /* __ASSEMBLY__ */ + +#ifdef __KERNEL__ + +#ifdef __powerpc64__ + +#define __ARCH_WANT_COMPAT_SYS_PTRACE + +#define STACK_FRAME_OVERHEAD 112 /* size of minimum stack frame */ +#define STACK_FRAME_LR_SAVE 2 /* Location of LR in stack frame */ +#define STACK_FRAME_REGS_MARKER ASM_CONST(0x7265677368657265) +#define STACK_INT_FRAME_SIZE (sizeof(struct pt_regs) + \ + STACK_FRAME_OVERHEAD + 288) +#define STACK_FRAME_MARKER 12 + +/* Size of dummy stack frame allocated when calling signal handler. */ +#define __SIGNAL_FRAMESIZE 128 +#define __SIGNAL_FRAMESIZE32 64 + +#else /* __powerpc64__ */ + +#define STACK_FRAME_OVERHEAD 16 /* size of minimum stack frame */ +#define STACK_FRAME_LR_SAVE 1 /* Location of LR in stack frame */ +#define STACK_FRAME_REGS_MARKER ASM_CONST(0x72656773) +#define STACK_INT_FRAME_SIZE (sizeof(struct pt_regs) + STACK_FRAME_OVERHEAD) +#define STACK_FRAME_MARKER 2 + +/* Size of stack frame allocated when calling signal handler. */ +#define __SIGNAL_FRAMESIZE 64 + +#endif /* __powerpc64__ */ + +#ifndef __ASSEMBLY__ + +#define instruction_pointer(regs) ((regs)->nip) +#define user_stack_pointer(regs) ((regs)->gpr[1]) +#define regs_return_value(regs) ((regs)->gpr[3]) + +#ifdef CONFIG_SMP +extern unsigned long profile_pc(struct pt_regs *regs); +#else +#define profile_pc(regs) instruction_pointer(regs) +#endif + +#ifdef __powerpc64__ +#define user_mode(regs) ((((regs)->msr) >> MSR_PR_LG) & 0x1) +#else +#define user_mode(regs) (((regs)->msr & MSR_PR) != 0) +#endif + +#define force_successful_syscall_return() \ + do { \ + set_thread_flag(TIF_NOERROR); \ + } while(0) + +struct task_struct; +extern unsigned long ptrace_get_reg(struct task_struct *task, int regno); +extern int ptrace_put_reg(struct task_struct *task, int regno, + unsigned long data); + +/* + * We use the least-significant bit of the trap field to indicate + * whether we have saved the full set of registers, or only a + * partial set. A 1 there means the partial set. + * On 4xx we use the next bit to indicate whether the exception + * is a critical exception (1 means it is). + */ +#define FULL_REGS(regs) (((regs)->trap & 1) == 0) +#ifndef __powerpc64__ +#define IS_CRITICAL_EXC(regs) (((regs)->trap & 2) != 0) +#define IS_MCHECK_EXC(regs) (((regs)->trap & 4) != 0) +#define IS_DEBUG_EXC(regs) (((regs)->trap & 8) != 0) +#endif /* ! __powerpc64__ */ +#define TRAP(regs) ((regs)->trap & ~0xF) +#ifdef __powerpc64__ +#define CHECK_FULL_REGS(regs) BUG_ON(regs->trap & 1) +#else +#define CHECK_FULL_REGS(regs) \ +do { \ + if ((regs)->trap & 1) \ + printk(KERN_CRIT "%s: partial register set\n", __FUNCTION__); \ +} while (0) +#endif /* __powerpc64__ */ + +/* + * These are defined as per linux/ptrace.h, which see. + */ +#define arch_has_single_step() (1) +extern void user_enable_single_step(struct task_struct *); +extern void user_disable_single_step(struct task_struct *); + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +/* + * Offsets used by 'ptrace' system call interface. + * These can't be changed without breaking binary compatibility + * with MkLinux, etc. + */ +#define PT_R0 0 +#define PT_R1 1 +#define PT_R2 2 +#define PT_R3 3 +#define PT_R4 4 +#define PT_R5 5 +#define PT_R6 6 +#define PT_R7 7 +#define PT_R8 8 +#define PT_R9 9 +#define PT_R10 10 +#define PT_R11 11 +#define PT_R12 12 +#define PT_R13 13 +#define PT_R14 14 +#define PT_R15 15 +#define PT_R16 16 +#define PT_R17 17 +#define PT_R18 18 +#define PT_R19 19 +#define PT_R20 20 +#define PT_R21 21 +#define PT_R22 22 +#define PT_R23 23 +#define PT_R24 24 +#define PT_R25 25 +#define PT_R26 26 +#define PT_R27 27 +#define PT_R28 28 +#define PT_R29 29 +#define PT_R30 30 +#define PT_R31 31 + +#define PT_NIP 32 +#define PT_MSR 33 +#define PT_ORIG_R3 34 +#define PT_CTR 35 +#define PT_LNK 36 +#define PT_XER 37 +#define PT_CCR 38 +#ifndef __powerpc64__ +#define PT_MQ 39 +#else +#define PT_SOFTE 39 +#endif +#define PT_TRAP 40 +#define PT_DAR 41 +#define PT_DSISR 42 +#define PT_RESULT 43 +#define PT_REGS_COUNT 44 + +#define PT_FPR0 48 /* each FP reg occupies 2 slots in this space */ + +#ifndef __powerpc64__ + +#define PT_FPR31 (PT_FPR0 + 2*31) +#define PT_FPSCR (PT_FPR0 + 2*32 + 1) + +#else /* __powerpc64__ */ + +#define PT_FPSCR (PT_FPR0 + 32) /* each FP reg occupies 1 slot in 64-bit space */ + +#ifdef __KERNEL__ +#define PT_FPSCR32 (PT_FPR0 + 2*32 + 1) /* each FP reg occupies 2 32-bit userspace slots */ +#endif + +#define PT_VR0 82 /* each Vector reg occupies 2 slots in 64-bit */ +#define PT_VSCR (PT_VR0 + 32*2 + 1) +#define PT_VRSAVE (PT_VR0 + 33*2) + +#ifdef __KERNEL__ +#define PT_VR0_32 164 /* each Vector reg occupies 4 slots in 32-bit */ +#define PT_VSCR_32 (PT_VR0 + 32*4 + 3) +#define PT_VRSAVE_32 (PT_VR0 + 33*4) +#endif + +/* + * Only store first 32 VSRs here. The second 32 VSRs in VR0-31 + */ +#define PT_VSR0 150 /* each VSR reg occupies 2 slots in 64-bit */ +#define PT_VSR31 (PT_VSR0 + 2*31) +#ifdef __KERNEL__ +#define PT_VSR0_32 300 /* each VSR reg occupies 4 slots in 32-bit */ +#endif +#endif /* __powerpc64__ */ + +/* + * Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go. + * The transfer totals 34 quadword. Quadwords 0-31 contain the + * corresponding vector registers. Quadword 32 contains the vscr as the + * last word (offset 12) within that quadword. Quadword 33 contains the + * vrsave as the first word (offset 0) within the quadword. + * + * This definition of the VMX state is compatible with the current PPC32 + * ptrace interface. This allows signal handling and ptrace to use the same + * structures. This also simplifies the implementation of a bi-arch + * (combined (32- and 64-bit) gdb. + */ +#define PTRACE_GETVRREGS 18 +#define PTRACE_SETVRREGS 19 + +/* Get/set all the upper 32-bits of the SPE registers, accumulator, and + * spefscr, in one go */ +#define PTRACE_GETEVRREGS 20 +#define PTRACE_SETEVRREGS 21 + +/* Get the first 32 128bit VSX registers */ +#define PTRACE_GETVSRREGS 27 +#define PTRACE_SETVSRREGS 28 + +/* + * Get or set a debug register. The first 16 are DABR registers and the + * second 16 are IABR registers. + */ +#define PTRACE_GET_DEBUGREG 25 +#define PTRACE_SET_DEBUGREG 26 + +/* (new) PTRACE requests using the same numbers as x86 and the same + * argument ordering. Additionally, they support more registers too + */ +#define PTRACE_GETREGS 12 +#define PTRACE_SETREGS 13 +#define PTRACE_GETFPREGS 14 +#define PTRACE_SETFPREGS 15 +#define PTRACE_GETREGS64 22 +#define PTRACE_SETREGS64 23 + +/* (old) PTRACE requests with inverted arguments */ +#define PPC_PTRACE_GETREGS 0x99 /* Get GPRs 0 - 31 */ +#define PPC_PTRACE_SETREGS 0x98 /* Set GPRs 0 - 31 */ +#define PPC_PTRACE_GETFPREGS 0x97 /* Get FPRs 0 - 31 */ +#define PPC_PTRACE_SETFPREGS 0x96 /* Set FPRs 0 - 31 */ + +/* Calls to trace a 64bit program from a 32bit program */ +#define PPC_PTRACE_PEEKTEXT_3264 0x95 +#define PPC_PTRACE_PEEKDATA_3264 0x94 +#define PPC_PTRACE_POKETEXT_3264 0x93 +#define PPC_PTRACE_POKEDATA_3264 0x92 +#define PPC_PTRACE_PEEKUSR_3264 0x91 +#define PPC_PTRACE_POKEUSR_3264 0x90 + +#endif /* _ASM_POWERPC_PTRACE_H */ diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h new file mode 100644 index 00000000000..edee15d269e --- /dev/null +++ b/arch/powerpc/include/asm/qe.h @@ -0,0 +1,642 @@ +/* + * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. + * + * Authors: Shlomi Gridish + * Li Yang + * + * Description: + * QUICC Engine (QE) external definitions and structure. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef _ASM_POWERPC_QE_H +#define _ASM_POWERPC_QE_H +#ifdef __KERNEL__ + +#include +#include +#include + +#define QE_NUM_OF_SNUM 28 +#define QE_NUM_OF_BRGS 16 +#define QE_NUM_OF_PORTS 1024 + +/* Memory partitions +*/ +#define MEM_PART_SYSTEM 0 +#define MEM_PART_SECONDARY 1 +#define MEM_PART_MURAM 2 + +/* Clocks and BRGs */ +enum qe_clock { + QE_CLK_NONE = 0, + QE_BRG1, /* Baud Rate Generator 1 */ + QE_BRG2, /* Baud Rate Generator 2 */ + QE_BRG3, /* Baud Rate Generator 3 */ + QE_BRG4, /* Baud Rate Generator 4 */ + QE_BRG5, /* Baud Rate Generator 5 */ + QE_BRG6, /* Baud Rate Generator 6 */ + QE_BRG7, /* Baud Rate Generator 7 */ + QE_BRG8, /* Baud Rate Generator 8 */ + QE_BRG9, /* Baud Rate Generator 9 */ + QE_BRG10, /* Baud Rate Generator 10 */ + QE_BRG11, /* Baud Rate Generator 11 */ + QE_BRG12, /* Baud Rate Generator 12 */ + QE_BRG13, /* Baud Rate Generator 13 */ + QE_BRG14, /* Baud Rate Generator 14 */ + QE_BRG15, /* Baud Rate Generator 15 */ + QE_BRG16, /* Baud Rate Generator 16 */ + QE_CLK1, /* Clock 1 */ + QE_CLK2, /* Clock 2 */ + QE_CLK3, /* Clock 3 */ + QE_CLK4, /* Clock 4 */ + QE_CLK5, /* Clock 5 */ + QE_CLK6, /* Clock 6 */ + QE_CLK7, /* Clock 7 */ + QE_CLK8, /* Clock 8 */ + QE_CLK9, /* Clock 9 */ + QE_CLK10, /* Clock 10 */ + QE_CLK11, /* Clock 11 */ + QE_CLK12, /* Clock 12 */ + QE_CLK13, /* Clock 13 */ + QE_CLK14, /* Clock 14 */ + QE_CLK15, /* Clock 15 */ + QE_CLK16, /* Clock 16 */ + QE_CLK17, /* Clock 17 */ + QE_CLK18, /* Clock 18 */ + QE_CLK19, /* Clock 19 */ + QE_CLK20, /* Clock 20 */ + QE_CLK21, /* Clock 21 */ + QE_CLK22, /* Clock 22 */ + QE_CLK23, /* Clock 23 */ + QE_CLK24, /* Clock 24 */ + QE_CLK_DUMMY +}; + +static inline bool qe_clock_is_brg(enum qe_clock clk) +{ + return clk >= QE_BRG1 && clk <= QE_BRG16; +} + +extern spinlock_t cmxgcr_lock; + +/* Export QE common operations */ +extern void __init qe_reset(void); + +/* QE PIO */ +#define QE_PIO_PINS 32 + +struct qe_pio_regs { + __be32 cpodr; /* Open drain register */ + __be32 cpdata; /* Data register */ + __be32 cpdir1; /* Direction register */ + __be32 cpdir2; /* Direction register */ + __be32 cppar1; /* Pin assignment register */ + __be32 cppar2; /* Pin assignment register */ +#ifdef CONFIG_PPC_85xx + u8 pad[8]; +#endif +}; + +extern int par_io_init(struct device_node *np); +extern int par_io_of_config(struct device_node *np); +#define QE_PIO_DIR_IN 2 +#define QE_PIO_DIR_OUT 1 +extern void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin, + int dir, int open_drain, int assignment, + int has_irq); +extern int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain, + int assignment, int has_irq); +extern int par_io_data_set(u8 port, u8 pin, u8 val); + +/* QE internal API */ +int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input); +enum qe_clock qe_clock_source(const char *source); +unsigned int qe_get_brg_clk(void); +int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier); +int qe_get_snum(void); +void qe_put_snum(u8 snum); +/* we actually use cpm_muram implementation, define this for convenience */ +#define qe_muram_init cpm_muram_init +#define qe_muram_alloc cpm_muram_alloc +#define qe_muram_alloc_fixed cpm_muram_alloc_fixed +#define qe_muram_free cpm_muram_free +#define qe_muram_addr cpm_muram_addr +#define qe_muram_offset cpm_muram_offset + +/* Structure that defines QE firmware binary files. + * + * See Documentation/powerpc/qe-firmware.txt for a description of these + * fields. + */ +struct qe_firmware { + struct qe_header { + __be32 length; /* Length of the entire structure, in bytes */ + u8 magic[3]; /* Set to { 'Q', 'E', 'F' } */ + u8 version; /* Version of this layout. First ver is '1' */ + } header; + u8 id[62]; /* Null-terminated identifier string */ + u8 split; /* 0 = shared I-RAM, 1 = split I-RAM */ + u8 count; /* Number of microcode[] structures */ + struct { + __be16 model; /* The SOC model */ + u8 major; /* The SOC revision major */ + u8 minor; /* The SOC revision minor */ + } __attribute__ ((packed)) soc; + u8 padding[4]; /* Reserved, for alignment */ + __be64 extended_modes; /* Extended modes */ + __be32 vtraps[8]; /* Virtual trap addresses */ + u8 reserved[4]; /* Reserved, for future expansion */ + struct qe_microcode { + u8 id[32]; /* Null-terminated identifier */ + __be32 traps[16]; /* Trap addresses, 0 == ignore */ + __be32 eccr; /* The value for the ECCR register */ + __be32 iram_offset; /* Offset into I-RAM for the code */ + __be32 count; /* Number of 32-bit words of the code */ + __be32 code_offset; /* Offset of the actual microcode */ + u8 major; /* The microcode version major */ + u8 minor; /* The microcode version minor */ + u8 revision; /* The microcode version revision */ + u8 padding; /* Reserved, for alignment */ + u8 reserved[4]; /* Reserved, for future expansion */ + } __attribute__ ((packed)) microcode[1]; + /* All microcode binaries should be located here */ + /* CRC32 should be located here, after the microcode binaries */ +} __attribute__ ((packed)); + +struct qe_firmware_info { + char id[64]; /* Firmware name */ + u32 vtraps[8]; /* Virtual trap addresses */ + u64 extended_modes; /* Extended modes */ +}; + +/* Upload a firmware to the QE */ +int qe_upload_firmware(const struct qe_firmware *firmware); + +/* Obtain information on the uploaded firmware */ +struct qe_firmware_info *qe_get_firmware_info(void); + +/* QE USB */ +int qe_usb_clock_set(enum qe_clock clk, int rate); + +/* Buffer descriptors */ +struct qe_bd { + __be16 status; + __be16 length; + __be32 buf; +} __attribute__ ((packed)); + +#define BD_STATUS_MASK 0xffff0000 +#define BD_LENGTH_MASK 0x0000ffff + +/* Alignment */ +#define QE_INTR_TABLE_ALIGN 16 /* ??? */ +#define QE_ALIGNMENT_OF_BD 8 +#define QE_ALIGNMENT_OF_PRAM 64 + +/* RISC allocation */ +enum qe_risc_allocation { + QE_RISC_ALLOCATION_RISC1 = 1, /* RISC 1 */ + QE_RISC_ALLOCATION_RISC2 = 2, /* RISC 2 */ + QE_RISC_ALLOCATION_RISC1_AND_RISC2 = 3 /* Dynamically choose + RISC 1 or RISC 2 */ +}; + +/* QE extended filtering Table Lookup Key Size */ +enum qe_fltr_tbl_lookup_key_size { + QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES + = 0x3f, /* LookupKey parsed by the Generate LookupKey + CMD is truncated to 8 bytes */ + QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES + = 0x5f, /* LookupKey parsed by the Generate LookupKey + CMD is truncated to 16 bytes */ +}; + +/* QE FLTR extended filtering Largest External Table Lookup Key Size */ +enum qe_fltr_largest_external_tbl_lookup_key_size { + QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_NONE + = 0x0,/* not used */ + QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_8_BYTES + = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES, /* 8 bytes */ + QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_16_BYTES + = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES, /* 16 bytes */ +}; + +/* structure representing QE parameter RAM */ +struct qe_timer_tables { + u16 tm_base; /* QE timer table base adr */ + u16 tm_ptr; /* QE timer table pointer */ + u16 r_tmr; /* QE timer mode register */ + u16 r_tmv; /* QE timer valid register */ + u32 tm_cmd; /* QE timer cmd register */ + u32 tm_cnt; /* QE timer internal cnt */ +} __attribute__ ((packed)); + +#define QE_FLTR_TAD_SIZE 8 + +/* QE extended filtering Termination Action Descriptor (TAD) */ +struct qe_fltr_tad { + u8 serialized[QE_FLTR_TAD_SIZE]; +} __attribute__ ((packed)); + +/* Communication Direction */ +enum comm_dir { + COMM_DIR_NONE = 0, + COMM_DIR_RX = 1, + COMM_DIR_TX = 2, + COMM_DIR_RX_AND_TX = 3 +}; + +/* QE CMXUCR Registers. + * There are two UCCs represented in each of the four CMXUCR registers. + * These values are for the UCC in the LSBs + */ +#define QE_CMXUCR_MII_ENET_MNG 0x00007000 +#define QE_CMXUCR_MII_ENET_MNG_SHIFT 12 +#define QE_CMXUCR_GRANT 0x00008000 +#define QE_CMXUCR_TSA 0x00004000 +#define QE_CMXUCR_BKPT 0x00000100 +#define QE_CMXUCR_TX_CLK_SRC_MASK 0x0000000F + +/* QE CMXGCR Registers. +*/ +#define QE_CMXGCR_MII_ENET_MNG 0x00007000 +#define QE_CMXGCR_MII_ENET_MNG_SHIFT 12 +#define QE_CMXGCR_USBCS 0x0000000f +#define QE_CMXGCR_USBCS_CLK3 0x1 +#define QE_CMXGCR_USBCS_CLK5 0x2 +#define QE_CMXGCR_USBCS_CLK7 0x3 +#define QE_CMXGCR_USBCS_CLK9 0x4 +#define QE_CMXGCR_USBCS_CLK13 0x5 +#define QE_CMXGCR_USBCS_CLK17 0x6 +#define QE_CMXGCR_USBCS_CLK19 0x7 +#define QE_CMXGCR_USBCS_CLK21 0x8 +#define QE_CMXGCR_USBCS_BRG9 0x9 +#define QE_CMXGCR_USBCS_BRG10 0xa + +/* QE CECR Commands. +*/ +#define QE_CR_FLG 0x00010000 +#define QE_RESET 0x80000000 +#define QE_INIT_TX_RX 0x00000000 +#define QE_INIT_RX 0x00000001 +#define QE_INIT_TX 0x00000002 +#define QE_ENTER_HUNT_MODE 0x00000003 +#define QE_STOP_TX 0x00000004 +#define QE_GRACEFUL_STOP_TX 0x00000005 +#define QE_RESTART_TX 0x00000006 +#define QE_CLOSE_RX_BD 0x00000007 +#define QE_SWITCH_COMMAND 0x00000007 +#define QE_SET_GROUP_ADDRESS 0x00000008 +#define QE_START_IDMA 0x00000009 +#define QE_MCC_STOP_RX 0x00000009 +#define QE_ATM_TRANSMIT 0x0000000a +#define QE_HPAC_CLEAR_ALL 0x0000000b +#define QE_GRACEFUL_STOP_RX 0x0000001a +#define QE_RESTART_RX 0x0000001b +#define QE_HPAC_SET_PRIORITY 0x0000010b +#define QE_HPAC_STOP_TX 0x0000020b +#define QE_HPAC_STOP_RX 0x0000030b +#define QE_HPAC_GRACEFUL_STOP_TX 0x0000040b +#define QE_HPAC_GRACEFUL_STOP_RX 0x0000050b +#define QE_HPAC_START_TX 0x0000060b +#define QE_HPAC_START_RX 0x0000070b +#define QE_USB_STOP_TX 0x0000000a +#define QE_USB_RESTART_TX 0x0000000c +#define QE_QMC_STOP_TX 0x0000000c +#define QE_QMC_STOP_RX 0x0000000d +#define QE_SS7_SU_FIL_RESET 0x0000000e +/* jonathbr added from here down for 83xx */ +#define QE_RESET_BCS 0x0000000a +#define QE_MCC_INIT_TX_RX_16 0x00000003 +#define QE_MCC_STOP_TX 0x00000004 +#define QE_MCC_INIT_TX_1 0x00000005 +#define QE_MCC_INIT_RX_1 0x00000006 +#define QE_MCC_RESET 0x00000007 +#define QE_SET_TIMER 0x00000008 +#define QE_RANDOM_NUMBER 0x0000000c +#define QE_ATM_MULTI_THREAD_INIT 0x00000011 +#define QE_ASSIGN_PAGE 0x00000012 +#define QE_ADD_REMOVE_HASH_ENTRY 0x00000013 +#define QE_START_FLOW_CONTROL 0x00000014 +#define QE_STOP_FLOW_CONTROL 0x00000015 +#define QE_ASSIGN_PAGE_TO_DEVICE 0x00000016 + +#define QE_ASSIGN_RISC 0x00000010 +#define QE_CR_MCN_NORMAL_SHIFT 6 +#define QE_CR_MCN_USB_SHIFT 4 +#define QE_CR_MCN_RISC_ASSIGN_SHIFT 8 +#define QE_CR_SNUM_SHIFT 17 + +/* QE CECR Sub Block - sub block of QE command. +*/ +#define QE_CR_SUBBLOCK_INVALID 0x00000000 +#define QE_CR_SUBBLOCK_USB 0x03200000 +#define QE_CR_SUBBLOCK_UCCFAST1 0x02000000 +#define QE_CR_SUBBLOCK_UCCFAST2 0x02200000 +#define QE_CR_SUBBLOCK_UCCFAST3 0x02400000 +#define QE_CR_SUBBLOCK_UCCFAST4 0x02600000 +#define QE_CR_SUBBLOCK_UCCFAST5 0x02800000 +#define QE_CR_SUBBLOCK_UCCFAST6 0x02a00000 +#define QE_CR_SUBBLOCK_UCCFAST7 0x02c00000 +#define QE_CR_SUBBLOCK_UCCFAST8 0x02e00000 +#define QE_CR_SUBBLOCK_UCCSLOW1 0x00000000 +#define QE_CR_SUBBLOCK_UCCSLOW2 0x00200000 +#define QE_CR_SUBBLOCK_UCCSLOW3 0x00400000 +#define QE_CR_SUBBLOCK_UCCSLOW4 0x00600000 +#define QE_CR_SUBBLOCK_UCCSLOW5 0x00800000 +#define QE_CR_SUBBLOCK_UCCSLOW6 0x00a00000 +#define QE_CR_SUBBLOCK_UCCSLOW7 0x00c00000 +#define QE_CR_SUBBLOCK_UCCSLOW8 0x00e00000 +#define QE_CR_SUBBLOCK_MCC1 0x03800000 +#define QE_CR_SUBBLOCK_MCC2 0x03a00000 +#define QE_CR_SUBBLOCK_MCC3 0x03000000 +#define QE_CR_SUBBLOCK_IDMA1 0x02800000 +#define QE_CR_SUBBLOCK_IDMA2 0x02a00000 +#define QE_CR_SUBBLOCK_IDMA3 0x02c00000 +#define QE_CR_SUBBLOCK_IDMA4 0x02e00000 +#define QE_CR_SUBBLOCK_HPAC 0x01e00000 +#define QE_CR_SUBBLOCK_SPI1 0x01400000 +#define QE_CR_SUBBLOCK_SPI2 0x01600000 +#define QE_CR_SUBBLOCK_RAND 0x01c00000 +#define QE_CR_SUBBLOCK_TIMER 0x01e00000 +#define QE_CR_SUBBLOCK_GENERAL 0x03c00000 + +/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command */ +#define QE_CR_PROTOCOL_UNSPECIFIED 0x00 /* For all other protocols */ +#define QE_CR_PROTOCOL_HDLC_TRANSPARENT 0x00 +#define QE_CR_PROTOCOL_QMC 0x02 +#define QE_CR_PROTOCOL_UART 0x04 +#define QE_CR_PROTOCOL_ATM_POS 0x0A +#define QE_CR_PROTOCOL_ETHERNET 0x0C +#define QE_CR_PROTOCOL_L2_SWITCH 0x0D + +/* BRG configuration register */ +#define QE_BRGC_ENABLE 0x00010000 +#define QE_BRGC_DIVISOR_SHIFT 1 +#define QE_BRGC_DIVISOR_MAX 0xFFF +#define QE_BRGC_DIV16 1 + +/* QE Timers registers */ +#define QE_GTCFR1_PCAS 0x80 +#define QE_GTCFR1_STP2 0x20 +#define QE_GTCFR1_RST2 0x10 +#define QE_GTCFR1_GM2 0x08 +#define QE_GTCFR1_GM1 0x04 +#define QE_GTCFR1_STP1 0x02 +#define QE_GTCFR1_RST1 0x01 + +/* SDMA registers */ +#define QE_SDSR_BER1 0x02000000 +#define QE_SDSR_BER2 0x01000000 + +#define QE_SDMR_GLB_1_MSK 0x80000000 +#define QE_SDMR_ADR_SEL 0x20000000 +#define QE_SDMR_BER1_MSK 0x02000000 +#define QE_SDMR_BER2_MSK 0x01000000 +#define QE_SDMR_EB1_MSK 0x00800000 +#define QE_SDMR_ER1_MSK 0x00080000 +#define QE_SDMR_ER2_MSK 0x00040000 +#define QE_SDMR_CEN_MASK 0x0000E000 +#define QE_SDMR_SBER_1 0x00000200 +#define QE_SDMR_SBER_2 0x00000200 +#define QE_SDMR_EB1_PR_MASK 0x000000C0 +#define QE_SDMR_ER1_PR 0x00000008 + +#define QE_SDMR_CEN_SHIFT 13 +#define QE_SDMR_EB1_PR_SHIFT 6 + +#define QE_SDTM_MSNUM_SHIFT 24 + +#define QE_SDEBCR_BA_MASK 0x01FFFFFF + +/* Communication Processor */ +#define QE_CP_CERCR_MEE 0x8000 /* Multi-user RAM ECC enable */ +#define QE_CP_CERCR_IEE 0x4000 /* Instruction RAM ECC enable */ +#define QE_CP_CERCR_CIR 0x0800 /* Common instruction RAM */ + +/* I-RAM */ +#define QE_IRAM_IADD_AIE 0x80000000 /* Auto Increment Enable */ +#define QE_IRAM_IADD_BADDR 0x00080000 /* Base Address */ + +/* UPC */ +#define UPGCR_PROTOCOL 0x80000000 /* protocol ul2 or pl2 */ +#define UPGCR_TMS 0x40000000 /* Transmit master/slave mode */ +#define UPGCR_RMS 0x20000000 /* Receive master/slave mode */ +#define UPGCR_ADDR 0x10000000 /* Master MPHY Addr multiplexing */ +#define UPGCR_DIAG 0x01000000 /* Diagnostic mode */ + +/* UCC GUEMR register */ +#define UCC_GUEMR_MODE_MASK_RX 0x02 +#define UCC_GUEMR_MODE_FAST_RX 0x02 +#define UCC_GUEMR_MODE_SLOW_RX 0x00 +#define UCC_GUEMR_MODE_MASK_TX 0x01 +#define UCC_GUEMR_MODE_FAST_TX 0x01 +#define UCC_GUEMR_MODE_SLOW_TX 0x00 +#define UCC_GUEMR_MODE_MASK (UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX) +#define UCC_GUEMR_SET_RESERVED3 0x10 /* Bit 3 in the guemr is reserved but + must be set 1 */ + +/* structure representing UCC SLOW parameter RAM */ +struct ucc_slow_pram { + __be16 rbase; /* RX BD base address */ + __be16 tbase; /* TX BD base address */ + u8 rbmr; /* RX bus mode register (same as CPM's RFCR) */ + u8 tbmr; /* TX bus mode register (same as CPM's TFCR) */ + __be16 mrblr; /* Rx buffer length */ + __be32 rstate; /* Rx internal state */ + __be32 rptr; /* Rx internal data pointer */ + __be16 rbptr; /* rb BD Pointer */ + __be16 rcount; /* Rx internal byte count */ + __be32 rtemp; /* Rx temp */ + __be32 tstate; /* Tx internal state */ + __be32 tptr; /* Tx internal data pointer */ + __be16 tbptr; /* Tx BD pointer */ + __be16 tcount; /* Tx byte count */ + __be32 ttemp; /* Tx temp */ + __be32 rcrc; /* temp receive CRC */ + __be32 tcrc; /* temp transmit CRC */ +} __attribute__ ((packed)); + +/* General UCC SLOW Mode Register (GUMRH & GUMRL) */ +#define UCC_SLOW_GUMR_H_SAM_QMC 0x00000000 +#define UCC_SLOW_GUMR_H_SAM_SATM 0x00008000 +#define UCC_SLOW_GUMR_H_REVD 0x00002000 +#define UCC_SLOW_GUMR_H_TRX 0x00001000 +#define UCC_SLOW_GUMR_H_TTX 0x00000800 +#define UCC_SLOW_GUMR_H_CDP 0x00000400 +#define UCC_SLOW_GUMR_H_CTSP 0x00000200 +#define UCC_SLOW_GUMR_H_CDS 0x00000100 +#define UCC_SLOW_GUMR_H_CTSS 0x00000080 +#define UCC_SLOW_GUMR_H_TFL 0x00000040 +#define UCC_SLOW_GUMR_H_RFW 0x00000020 +#define UCC_SLOW_GUMR_H_TXSY 0x00000010 +#define UCC_SLOW_GUMR_H_4SYNC 0x00000004 +#define UCC_SLOW_GUMR_H_8SYNC 0x00000008 +#define UCC_SLOW_GUMR_H_16SYNC 0x0000000c +#define UCC_SLOW_GUMR_H_RTSM 0x00000002 +#define UCC_SLOW_GUMR_H_RSYN 0x00000001 + +#define UCC_SLOW_GUMR_L_TCI 0x10000000 +#define UCC_SLOW_GUMR_L_RINV 0x02000000 +#define UCC_SLOW_GUMR_L_TINV 0x01000000 +#define UCC_SLOW_GUMR_L_TEND 0x00040000 +#define UCC_SLOW_GUMR_L_TDCR_MASK 0x00030000 +#define UCC_SLOW_GUMR_L_TDCR_32 0x00030000 +#define UCC_SLOW_GUMR_L_TDCR_16 0x00020000 +#define UCC_SLOW_GUMR_L_TDCR_8 0x00010000 +#define UCC_SLOW_GUMR_L_TDCR_1 0x00000000 +#define UCC_SLOW_GUMR_L_RDCR_MASK 0x0000c000 +#define UCC_SLOW_GUMR_L_RDCR_32 0x0000c000 +#define UCC_SLOW_GUMR_L_RDCR_16 0x00008000 +#define UCC_SLOW_GUMR_L_RDCR_8 0x00004000 +#define UCC_SLOW_GUMR_L_RDCR_1 0x00000000 +#define UCC_SLOW_GUMR_L_RENC_NRZI 0x00000800 +#define UCC_SLOW_GUMR_L_RENC_NRZ 0x00000000 +#define UCC_SLOW_GUMR_L_TENC_NRZI 0x00000100 +#define UCC_SLOW_GUMR_L_TENC_NRZ 0x00000000 +#define UCC_SLOW_GUMR_L_DIAG_MASK 0x000000c0 +#define UCC_SLOW_GUMR_L_DIAG_LE 0x000000c0 +#define UCC_SLOW_GUMR_L_DIAG_ECHO 0x00000080 +#define UCC_SLOW_GUMR_L_DIAG_LOOP 0x00000040 +#define UCC_SLOW_GUMR_L_DIAG_NORM 0x00000000 +#define UCC_SLOW_GUMR_L_ENR 0x00000020 +#define UCC_SLOW_GUMR_L_ENT 0x00000010 +#define UCC_SLOW_GUMR_L_MODE_MASK 0x0000000F +#define UCC_SLOW_GUMR_L_MODE_BISYNC 0x00000008 +#define UCC_SLOW_GUMR_L_MODE_AHDLC 0x00000006 +#define UCC_SLOW_GUMR_L_MODE_UART 0x00000004 +#define UCC_SLOW_GUMR_L_MODE_QMC 0x00000002 + +/* General UCC FAST Mode Register */ +#define UCC_FAST_GUMR_TCI 0x20000000 +#define UCC_FAST_GUMR_TRX 0x10000000 +#define UCC_FAST_GUMR_TTX 0x08000000 +#define UCC_FAST_GUMR_CDP 0x04000000 +#define UCC_FAST_GUMR_CTSP 0x02000000 +#define UCC_FAST_GUMR_CDS 0x01000000 +#define UCC_FAST_GUMR_CTSS 0x00800000 +#define UCC_FAST_GUMR_TXSY 0x00020000 +#define UCC_FAST_GUMR_RSYN 0x00010000 +#define UCC_FAST_GUMR_RTSM 0x00002000 +#define UCC_FAST_GUMR_REVD 0x00000400 +#define UCC_FAST_GUMR_ENR 0x00000020 +#define UCC_FAST_GUMR_ENT 0x00000010 + +/* UART Slow UCC Event Register (UCCE) */ +#define UCC_UART_UCCE_AB 0x0200 +#define UCC_UART_UCCE_IDLE 0x0100 +#define UCC_UART_UCCE_GRA 0x0080 +#define UCC_UART_UCCE_BRKE 0x0040 +#define UCC_UART_UCCE_BRKS 0x0020 +#define UCC_UART_UCCE_CCR 0x0008 +#define UCC_UART_UCCE_BSY 0x0004 +#define UCC_UART_UCCE_TX 0x0002 +#define UCC_UART_UCCE_RX 0x0001 + +/* HDLC Slow UCC Event Register (UCCE) */ +#define UCC_HDLC_UCCE_GLR 0x1000 +#define UCC_HDLC_UCCE_GLT 0x0800 +#define UCC_HDLC_UCCE_IDLE 0x0100 +#define UCC_HDLC_UCCE_BRKE 0x0040 +#define UCC_HDLC_UCCE_BRKS 0x0020 +#define UCC_HDLC_UCCE_TXE 0x0010 +#define UCC_HDLC_UCCE_RXF 0x0008 +#define UCC_HDLC_UCCE_BSY 0x0004 +#define UCC_HDLC_UCCE_TXB 0x0002 +#define UCC_HDLC_UCCE_RXB 0x0001 + +/* BISYNC Slow UCC Event Register (UCCE) */ +#define UCC_BISYNC_UCCE_GRA 0x0080 +#define UCC_BISYNC_UCCE_TXE 0x0010 +#define UCC_BISYNC_UCCE_RCH 0x0008 +#define UCC_BISYNC_UCCE_BSY 0x0004 +#define UCC_BISYNC_UCCE_TXB 0x0002 +#define UCC_BISYNC_UCCE_RXB 0x0001 + +/* Gigabit Ethernet Fast UCC Event Register (UCCE) */ +#define UCC_GETH_UCCE_MPD 0x80000000 +#define UCC_GETH_UCCE_SCAR 0x40000000 +#define UCC_GETH_UCCE_GRA 0x20000000 +#define UCC_GETH_UCCE_CBPR 0x10000000 +#define UCC_GETH_UCCE_BSY 0x08000000 +#define UCC_GETH_UCCE_RXC 0x04000000 +#define UCC_GETH_UCCE_TXC 0x02000000 +#define UCC_GETH_UCCE_TXE 0x01000000 +#define UCC_GETH_UCCE_TXB7 0x00800000 +#define UCC_GETH_UCCE_TXB6 0x00400000 +#define UCC_GETH_UCCE_TXB5 0x00200000 +#define UCC_GETH_UCCE_TXB4 0x00100000 +#define UCC_GETH_UCCE_TXB3 0x00080000 +#define UCC_GETH_UCCE_TXB2 0x00040000 +#define UCC_GETH_UCCE_TXB1 0x00020000 +#define UCC_GETH_UCCE_TXB0 0x00010000 +#define UCC_GETH_UCCE_RXB7 0x00008000 +#define UCC_GETH_UCCE_RXB6 0x00004000 +#define UCC_GETH_UCCE_RXB5 0x00002000 +#define UCC_GETH_UCCE_RXB4 0x00001000 +#define UCC_GETH_UCCE_RXB3 0x00000800 +#define UCC_GETH_UCCE_RXB2 0x00000400 +#define UCC_GETH_UCCE_RXB1 0x00000200 +#define UCC_GETH_UCCE_RXB0 0x00000100 +#define UCC_GETH_UCCE_RXF7 0x00000080 +#define UCC_GETH_UCCE_RXF6 0x00000040 +#define UCC_GETH_UCCE_RXF5 0x00000020 +#define UCC_GETH_UCCE_RXF4 0x00000010 +#define UCC_GETH_UCCE_RXF3 0x00000008 +#define UCC_GETH_UCCE_RXF2 0x00000004 +#define UCC_GETH_UCCE_RXF1 0x00000002 +#define UCC_GETH_UCCE_RXF0 0x00000001 + +/* UPSMR, when used as a UART */ +#define UCC_UART_UPSMR_FLC 0x8000 +#define UCC_UART_UPSMR_SL 0x4000 +#define UCC_UART_UPSMR_CL_MASK 0x3000 +#define UCC_UART_UPSMR_CL_8 0x3000 +#define UCC_UART_UPSMR_CL_7 0x2000 +#define UCC_UART_UPSMR_CL_6 0x1000 +#define UCC_UART_UPSMR_CL_5 0x0000 +#define UCC_UART_UPSMR_UM_MASK 0x0c00 +#define UCC_UART_UPSMR_UM_NORMAL 0x0000 +#define UCC_UART_UPSMR_UM_MAN_MULTI 0x0400 +#define UCC_UART_UPSMR_UM_AUTO_MULTI 0x0c00 +#define UCC_UART_UPSMR_FRZ 0x0200 +#define UCC_UART_UPSMR_RZS 0x0100 +#define UCC_UART_UPSMR_SYN 0x0080 +#define UCC_UART_UPSMR_DRT 0x0040 +#define UCC_UART_UPSMR_PEN 0x0010 +#define UCC_UART_UPSMR_RPM_MASK 0x000c +#define UCC_UART_UPSMR_RPM_ODD 0x0000 +#define UCC_UART_UPSMR_RPM_LOW 0x0004 +#define UCC_UART_UPSMR_RPM_EVEN 0x0008 +#define UCC_UART_UPSMR_RPM_HIGH 0x000C +#define UCC_UART_UPSMR_TPM_MASK 0x0003 +#define UCC_UART_UPSMR_TPM_ODD 0x0000 +#define UCC_UART_UPSMR_TPM_LOW 0x0001 +#define UCC_UART_UPSMR_TPM_EVEN 0x0002 +#define UCC_UART_UPSMR_TPM_HIGH 0x0003 + +/* UCC Transmit On Demand Register (UTODR) */ +#define UCC_SLOW_TOD 0x8000 +#define UCC_FAST_TOD 0x8000 + +/* UCC Bus Mode Register masks */ +/* Not to be confused with the Bundle Mode Register */ +#define UCC_BMR_GBL 0x20 +#define UCC_BMR_BO_BE 0x10 +#define UCC_BMR_CETM 0x04 +#define UCC_BMR_DTB 0x02 +#define UCC_BMR_BDB 0x01 + +/* Function code masks */ +#define FC_GBL 0x20 +#define FC_DTB_LCL 0x02 +#define UCC_FAST_FUNCTION_CODE_GBL 0x20 +#define UCC_FAST_FUNCTION_CODE_DTB_LCL 0x02 +#define UCC_FAST_FUNCTION_CODE_BDB_LCL 0x01 + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_QE_H */ diff --git a/arch/powerpc/include/asm/qe_ic.h b/arch/powerpc/include/asm/qe_ic.h new file mode 100644 index 00000000000..56a7745ca34 --- /dev/null +++ b/arch/powerpc/include/asm/qe_ic.h @@ -0,0 +1,128 @@ +/* + * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. + * + * Authors: Shlomi Gridish + * Li Yang + * + * Description: + * QE IC external definitions and structure. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef _ASM_POWERPC_QE_IC_H +#define _ASM_POWERPC_QE_IC_H + +#include + +#define NUM_OF_QE_IC_GROUPS 6 + +/* Flags when we init the QE IC */ +#define QE_IC_SPREADMODE_GRP_W 0x00000001 +#define QE_IC_SPREADMODE_GRP_X 0x00000002 +#define QE_IC_SPREADMODE_GRP_Y 0x00000004 +#define QE_IC_SPREADMODE_GRP_Z 0x00000008 +#define QE_IC_SPREADMODE_GRP_RISCA 0x00000010 +#define QE_IC_SPREADMODE_GRP_RISCB 0x00000020 + +#define QE_IC_LOW_SIGNAL 0x00000100 +#define QE_IC_HIGH_SIGNAL 0x00000200 + +#define QE_IC_GRP_W_PRI0_DEST_SIGNAL_HIGH 0x00001000 +#define QE_IC_GRP_W_PRI1_DEST_SIGNAL_HIGH 0x00002000 +#define QE_IC_GRP_X_PRI0_DEST_SIGNAL_HIGH 0x00004000 +#define QE_IC_GRP_X_PRI1_DEST_SIGNAL_HIGH 0x00008000 +#define QE_IC_GRP_Y_PRI0_DEST_SIGNAL_HIGH 0x00010000 +#define QE_IC_GRP_Y_PRI1_DEST_SIGNAL_HIGH 0x00020000 +#define QE_IC_GRP_Z_PRI0_DEST_SIGNAL_HIGH 0x00040000 +#define QE_IC_GRP_Z_PRI1_DEST_SIGNAL_HIGH 0x00080000 +#define QE_IC_GRP_RISCA_PRI0_DEST_SIGNAL_HIGH 0x00100000 +#define QE_IC_GRP_RISCA_PRI1_DEST_SIGNAL_HIGH 0x00200000 +#define QE_IC_GRP_RISCB_PRI0_DEST_SIGNAL_HIGH 0x00400000 +#define QE_IC_GRP_RISCB_PRI1_DEST_SIGNAL_HIGH 0x00800000 +#define QE_IC_GRP_W_DEST_SIGNAL_SHIFT (12) + +/* QE interrupt sources groups */ +enum qe_ic_grp_id { + QE_IC_GRP_W = 0, /* QE interrupt controller group W */ + QE_IC_GRP_X, /* QE interrupt controller group X */ + QE_IC_GRP_Y, /* QE interrupt controller group Y */ + QE_IC_GRP_Z, /* QE interrupt controller group Z */ + QE_IC_GRP_RISCA, /* QE interrupt controller RISC group A */ + QE_IC_GRP_RISCB /* QE interrupt controller RISC group B */ +}; + +void qe_ic_init(struct device_node *node, unsigned int flags, + void (*low_handler)(unsigned int irq, struct irq_desc *desc), + void (*high_handler)(unsigned int irq, struct irq_desc *desc)); +void qe_ic_set_highest_priority(unsigned int virq, int high); +int qe_ic_set_priority(unsigned int virq, unsigned int priority); +int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high); + +struct qe_ic; +unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic); +unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic); + +static inline void qe_ic_cascade_low_ipic(unsigned int irq, + struct irq_desc *desc) +{ + struct qe_ic *qe_ic = desc->handler_data; + unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic); + + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq); +} + +static inline void qe_ic_cascade_high_ipic(unsigned int irq, + struct irq_desc *desc) +{ + struct qe_ic *qe_ic = desc->handler_data; + unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic); + + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq); +} + +static inline void qe_ic_cascade_low_mpic(unsigned int irq, + struct irq_desc *desc) +{ + struct qe_ic *qe_ic = desc->handler_data; + unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic); + + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq); + + desc->chip->eoi(irq); +} + +static inline void qe_ic_cascade_high_mpic(unsigned int irq, + struct irq_desc *desc) +{ + struct qe_ic *qe_ic = desc->handler_data; + unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic); + + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq); + + desc->chip->eoi(irq); +} + +static inline void qe_ic_cascade_muxed_mpic(unsigned int irq, + struct irq_desc *desc) +{ + struct qe_ic *qe_ic = desc->handler_data; + unsigned int cascade_irq; + + cascade_irq = qe_ic_get_high_irq(qe_ic); + if (cascade_irq == NO_IRQ) + cascade_irq = qe_ic_get_low_irq(qe_ic); + + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq); + + desc->chip->eoi(irq); +} + +#endif /* _ASM_POWERPC_QE_IC_H */ diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h new file mode 100644 index 00000000000..c6d1ab65077 --- /dev/null +++ b/arch/powerpc/include/asm/reg.h @@ -0,0 +1,788 @@ +/* + * Contains the definition of registers common to all PowerPC variants. + * If a register definition has been changed in a different PowerPC + * variant, we will case it in #ifndef XXX ... #endif, and have the + * number used in the Programming Environments Manual For 32-Bit + * Implementations of the PowerPC Architecture (a.k.a. Green Book) here. + */ + +#ifndef _ASM_POWERPC_REG_H +#define _ASM_POWERPC_REG_H +#ifdef __KERNEL__ + +#include +#include + +/* Pickup Book E specific registers. */ +#if defined(CONFIG_BOOKE) || defined(CONFIG_40x) +#include +#endif /* CONFIG_BOOKE || CONFIG_40x */ + +#ifdef CONFIG_FSL_EMB_PERFMON +#include +#endif + +#ifdef CONFIG_8xx +#include +#endif /* CONFIG_8xx */ + +#define MSR_SF_LG 63 /* Enable 64 bit mode */ +#define MSR_ISF_LG 61 /* Interrupt 64b mode valid on 630 */ +#define MSR_HV_LG 60 /* Hypervisor state */ +#define MSR_VEC_LG 25 /* Enable AltiVec */ +#define MSR_VSX_LG 23 /* Enable VSX */ +#define MSR_POW_LG 18 /* Enable Power Management */ +#define MSR_WE_LG 18 /* Wait State Enable */ +#define MSR_TGPR_LG 17 /* TLB Update registers in use */ +#define MSR_CE_LG 17 /* Critical Interrupt Enable */ +#define MSR_ILE_LG 16 /* Interrupt Little Endian */ +#define MSR_EE_LG 15 /* External Interrupt Enable */ +#define MSR_PR_LG 14 /* Problem State / Privilege Level */ +#define MSR_FP_LG 13 /* Floating Point enable */ +#define MSR_ME_LG 12 /* Machine Check Enable */ +#define MSR_FE0_LG 11 /* Floating Exception mode 0 */ +#define MSR_SE_LG 10 /* Single Step */ +#define MSR_BE_LG 9 /* Branch Trace */ +#define MSR_DE_LG 9 /* Debug Exception Enable */ +#define MSR_FE1_LG 8 /* Floating Exception mode 1 */ +#define MSR_IP_LG 6 /* Exception prefix 0x000/0xFFF */ +#define MSR_IR_LG 5 /* Instruction Relocate */ +#define MSR_DR_LG 4 /* Data Relocate */ +#define MSR_PE_LG 3 /* Protection Enable */ +#define MSR_PX_LG 2 /* Protection Exclusive Mode */ +#define MSR_PMM_LG 2 /* Performance monitor */ +#define MSR_RI_LG 1 /* Recoverable Exception */ +#define MSR_LE_LG 0 /* Little Endian */ + +#ifdef __ASSEMBLY__ +#define __MASK(X) (1<<(X)) +#else +#define __MASK(X) (1UL<<(X)) +#endif + +#ifdef CONFIG_PPC64 +#define MSR_SF __MASK(MSR_SF_LG) /* Enable 64 bit mode */ +#define MSR_ISF __MASK(MSR_ISF_LG) /* Interrupt 64b mode valid on 630 */ +#define MSR_HV __MASK(MSR_HV_LG) /* Hypervisor state */ +#else +/* so tests for these bits fail on 32-bit */ +#define MSR_SF 0 +#define MSR_ISF 0 +#define MSR_HV 0 +#endif + +#define MSR_VEC __MASK(MSR_VEC_LG) /* Enable AltiVec */ +#define MSR_VSX __MASK(MSR_VSX_LG) /* Enable VSX */ +#define MSR_POW __MASK(MSR_POW_LG) /* Enable Power Management */ +#define MSR_WE __MASK(MSR_WE_LG) /* Wait State Enable */ +#define MSR_TGPR __MASK(MSR_TGPR_LG) /* TLB Update registers in use */ +#define MSR_CE __MASK(MSR_CE_LG) /* Critical Interrupt Enable */ +#define MSR_ILE __MASK(MSR_ILE_LG) /* Interrupt Little Endian */ +#define MSR_EE __MASK(MSR_EE_LG) /* External Interrupt Enable */ +#define MSR_PR __MASK(MSR_PR_LG) /* Problem State / Privilege Level */ +#define MSR_FP __MASK(MSR_FP_LG) /* Floating Point enable */ +#define MSR_ME __MASK(MSR_ME_LG) /* Machine Check Enable */ +#define MSR_FE0 __MASK(MSR_FE0_LG) /* Floating Exception mode 0 */ +#define MSR_SE __MASK(MSR_SE_LG) /* Single Step */ +#define MSR_BE __MASK(MSR_BE_LG) /* Branch Trace */ +#define MSR_DE __MASK(MSR_DE_LG) /* Debug Exception Enable */ +#define MSR_FE1 __MASK(MSR_FE1_LG) /* Floating Exception mode 1 */ +#define MSR_IP __MASK(MSR_IP_LG) /* Exception prefix 0x000/0xFFF */ +#define MSR_IR __MASK(MSR_IR_LG) /* Instruction Relocate */ +#define MSR_DR __MASK(MSR_DR_LG) /* Data Relocate */ +#define MSR_PE __MASK(MSR_PE_LG) /* Protection Enable */ +#define MSR_PX __MASK(MSR_PX_LG) /* Protection Exclusive Mode */ +#ifndef MSR_PMM +#define MSR_PMM __MASK(MSR_PMM_LG) /* Performance monitor */ +#endif +#define MSR_RI __MASK(MSR_RI_LG) /* Recoverable Exception */ +#define MSR_LE __MASK(MSR_LE_LG) /* Little Endian */ + +#ifdef CONFIG_PPC64 +#define MSR_ MSR_ME | MSR_RI | MSR_IR | MSR_DR | MSR_ISF |MSR_HV +#define MSR_KERNEL MSR_ | MSR_SF + +#define MSR_USER32 MSR_ | MSR_PR | MSR_EE +#define MSR_USER64 MSR_USER32 | MSR_SF + +#else /* 32-bit */ +/* Default MSR for kernel mode. */ +#ifndef MSR_KERNEL /* reg_booke.h also defines this */ +#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR) +#endif + +#define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE) +#endif + +/* Floating Point Status and Control Register (FPSCR) Fields */ +#define FPSCR_FX 0x80000000 /* FPU exception summary */ +#define FPSCR_FEX 0x40000000 /* FPU enabled exception summary */ +#define FPSCR_VX 0x20000000 /* Invalid operation summary */ +#define FPSCR_OX 0x10000000 /* Overflow exception summary */ +#define FPSCR_UX 0x08000000 /* Underflow exception summary */ +#define FPSCR_ZX 0x04000000 /* Zero-divide exception summary */ +#define FPSCR_XX 0x02000000 /* Inexact exception summary */ +#define FPSCR_VXSNAN 0x01000000 /* Invalid op for SNaN */ +#define FPSCR_VXISI 0x00800000 /* Invalid op for Inv - Inv */ +#define FPSCR_VXIDI 0x00400000 /* Invalid op for Inv / Inv */ +#define FPSCR_VXZDZ 0x00200000 /* Invalid op for Zero / Zero */ +#define FPSCR_VXIMZ 0x00100000 /* Invalid op for Inv * Zero */ +#define FPSCR_VXVC 0x00080000 /* Invalid op for Compare */ +#define FPSCR_FR 0x00040000 /* Fraction rounded */ +#define FPSCR_FI 0x00020000 /* Fraction inexact */ +#define FPSCR_FPRF 0x0001f000 /* FPU Result Flags */ +#define FPSCR_FPCC 0x0000f000 /* FPU Condition Codes */ +#define FPSCR_VXSOFT 0x00000400 /* Invalid op for software request */ +#define FPSCR_VXSQRT 0x00000200 /* Invalid op for square root */ +#define FPSCR_VXCVI 0x00000100 /* Invalid op for integer convert */ +#define FPSCR_VE 0x00000080 /* Invalid op exception enable */ +#define FPSCR_OE 0x00000040 /* IEEE overflow exception enable */ +#define FPSCR_UE 0x00000020 /* IEEE underflow exception enable */ +#define FPSCR_ZE 0x00000010 /* IEEE zero divide exception enable */ +#define FPSCR_XE 0x00000008 /* FP inexact exception enable */ +#define FPSCR_NI 0x00000004 /* FPU non IEEE-Mode */ +#define FPSCR_RN 0x00000003 /* FPU rounding control */ + +/* Special Purpose Registers (SPRNs)*/ +#define SPRN_CTR 0x009 /* Count Register */ +#define SPRN_DSCR 0x11 +#define SPRN_CTRLF 0x088 +#define SPRN_CTRLT 0x098 +#define CTRL_CT 0xc0000000 /* current thread */ +#define CTRL_CT0 0x80000000 /* thread 0 */ +#define CTRL_CT1 0x40000000 /* thread 1 */ +#define CTRL_TE 0x00c00000 /* thread enable */ +#define CTRL_RUNLATCH 0x1 +#define SPRN_DABR 0x3F5 /* Data Address Breakpoint Register */ +#define DABR_TRANSLATION (1UL << 2) +#define SPRN_DABR2 0x13D /* e300 */ +#define SPRN_DABRX 0x3F7 /* Data Address Breakpoint Register Extension */ +#define DABRX_USER (1UL << 0) +#define DABRX_KERNEL (1UL << 1) +#define SPRN_DAR 0x013 /* Data Address Register */ +#define SPRN_DBCR 0x136 /* e300 Data Breakpoint Control Reg */ +#define SPRN_DSISR 0x012 /* Data Storage Interrupt Status Register */ +#define DSISR_NOHPTE 0x40000000 /* no translation found */ +#define DSISR_PROTFAULT 0x08000000 /* protection fault */ +#define DSISR_ISSTORE 0x02000000 /* access was a store */ +#define DSISR_DABRMATCH 0x00400000 /* hit data breakpoint */ +#define DSISR_NOSEGMENT 0x00200000 /* STAB/SLB miss */ +#define SPRN_TBRL 0x10C /* Time Base Read Lower Register (user, R/O) */ +#define SPRN_TBRU 0x10D /* Time Base Read Upper Register (user, R/O) */ +#define SPRN_TBWL 0x11C /* Time Base Lower Register (super, R/W) */ +#define SPRN_TBWU 0x11D /* Time Base Upper Register (super, R/W) */ +#define SPRN_SPURR 0x134 /* Scaled PURR */ +#define SPRN_HIOR 0x137 /* 970 Hypervisor interrupt offset */ +#define SPRN_LPCR 0x13E /* LPAR Control Register */ +#define SPRN_DBAT0L 0x219 /* Data BAT 0 Lower Register */ +#define SPRN_DBAT0U 0x218 /* Data BAT 0 Upper Register */ +#define SPRN_DBAT1L 0x21B /* Data BAT 1 Lower Register */ +#define SPRN_DBAT1U 0x21A /* Data BAT 1 Upper Register */ +#define SPRN_DBAT2L 0x21D /* Data BAT 2 Lower Register */ +#define SPRN_DBAT2U 0x21C /* Data BAT 2 Upper Register */ +#define SPRN_DBAT3L 0x21F /* Data BAT 3 Lower Register */ +#define SPRN_DBAT3U 0x21E /* Data BAT 3 Upper Register */ +#define SPRN_DBAT4L 0x239 /* Data BAT 4 Lower Register */ +#define SPRN_DBAT4U 0x238 /* Data BAT 4 Upper Register */ +#define SPRN_DBAT5L 0x23B /* Data BAT 5 Lower Register */ +#define SPRN_DBAT5U 0x23A /* Data BAT 5 Upper Register */ +#define SPRN_DBAT6L 0x23D /* Data BAT 6 Lower Register */ +#define SPRN_DBAT6U 0x23C /* Data BAT 6 Upper Register */ +#define SPRN_DBAT7L 0x23F /* Data BAT 7 Lower Register */ +#define SPRN_DBAT7U 0x23E /* Data BAT 7 Upper Register */ + +#define SPRN_DEC 0x016 /* Decrement Register */ +#define SPRN_DER 0x095 /* Debug Enable Regsiter */ +#define DER_RSTE 0x40000000 /* Reset Interrupt */ +#define DER_CHSTPE 0x20000000 /* Check Stop */ +#define DER_MCIE 0x10000000 /* Machine Check Interrupt */ +#define DER_EXTIE 0x02000000 /* External Interrupt */ +#define DER_ALIE 0x01000000 /* Alignment Interrupt */ +#define DER_PRIE 0x00800000 /* Program Interrupt */ +#define DER_FPUVIE 0x00400000 /* FP Unavailable Interrupt */ +#define DER_DECIE 0x00200000 /* Decrementer Interrupt */ +#define DER_SYSIE 0x00040000 /* System Call Interrupt */ +#define DER_TRE 0x00020000 /* Trace Interrupt */ +#define DER_SEIE 0x00004000 /* FP SW Emulation Interrupt */ +#define DER_ITLBMSE 0x00002000 /* Imp. Spec. Instruction TLB Miss */ +#define DER_ITLBERE 0x00001000 /* Imp. Spec. Instruction TLB Error */ +#define DER_DTLBMSE 0x00000800 /* Imp. Spec. Data TLB Miss */ +#define DER_DTLBERE 0x00000400 /* Imp. Spec. Data TLB Error */ +#define DER_LBRKE 0x00000008 /* Load/Store Breakpoint Interrupt */ +#define DER_IBRKE 0x00000004 /* Instruction Breakpoint Interrupt */ +#define DER_EBRKE 0x00000002 /* External Breakpoint Interrupt */ +#define DER_DPIE 0x00000001 /* Dev. Port Nonmaskable Request */ +#define SPRN_DMISS 0x3D0 /* Data TLB Miss Register */ +#define SPRN_EAR 0x11A /* External Address Register */ +#define SPRN_HASH1 0x3D2 /* Primary Hash Address Register */ +#define SPRN_HASH2 0x3D3 /* Secondary Hash Address Resgister */ +#define SPRN_HID0 0x3F0 /* Hardware Implementation Register 0 */ +#define HID0_EMCP (1<<31) /* Enable Machine Check pin */ +#define HID0_EBA (1<<29) /* Enable Bus Address Parity */ +#define HID0_EBD (1<<28) /* Enable Bus Data Parity */ +#define HID0_SBCLK (1<<27) +#define HID0_EICE (1<<26) +#define HID0_TBEN (1<<26) /* Timebase enable - 745x */ +#define HID0_ECLK (1<<25) +#define HID0_PAR (1<<24) +#define HID0_STEN (1<<24) /* Software table search enable - 745x */ +#define HID0_HIGH_BAT (1<<23) /* Enable high BATs - 7455 */ +#define HID0_DOZE (1<<23) +#define HID0_NAP (1<<22) +#define HID0_SLEEP (1<<21) +#define HID0_DPM (1<<20) +#define HID0_BHTCLR (1<<18) /* Clear branch history table - 7450 */ +#define HID0_XAEN (1<<17) /* Extended addressing enable - 7450 */ +#define HID0_NHR (1<<16) /* Not hard reset (software bit-7450)*/ +#define HID0_ICE (1<<15) /* Instruction Cache Enable */ +#define HID0_DCE (1<<14) /* Data Cache Enable */ +#define HID0_ILOCK (1<<13) /* Instruction Cache Lock */ +#define HID0_DLOCK (1<<12) /* Data Cache Lock */ +#define HID0_ICFI (1<<11) /* Instr. Cache Flash Invalidate */ +#define HID0_DCI (1<<10) /* Data Cache Invalidate */ +#define HID0_SPD (1<<9) /* Speculative disable */ +#define HID0_DAPUEN (1<<8) /* Debug APU enable */ +#define HID0_SGE (1<<7) /* Store Gathering Enable */ +#define HID0_SIED (1<<7) /* Serial Instr. Execution [Disable] */ +#define HID0_DCFA (1<<6) /* Data Cache Flush Assist */ +#define HID0_LRSTK (1<<4) /* Link register stack - 745x */ +#define HID0_BTIC (1<<5) /* Branch Target Instr Cache Enable */ +#define HID0_ABE (1<<3) /* Address Broadcast Enable */ +#define HID0_FOLD (1<<3) /* Branch Folding enable - 745x */ +#define HID0_BHTE (1<<2) /* Branch History Table Enable */ +#define HID0_BTCD (1<<1) /* Branch target cache disable */ +#define HID0_NOPDST (1<<1) /* No-op dst, dstt, etc. instr. */ +#define HID0_NOPTI (1<<0) /* No-op dcbt and dcbst instr. */ + +#define SPRN_HID1 0x3F1 /* Hardware Implementation Register 1 */ +#define HID1_EMCP (1<<31) /* 7450 Machine Check Pin Enable */ +#define HID1_DFS (1<<22) /* 7447A Dynamic Frequency Scaling */ +#define HID1_PC0 (1<<16) /* 7450 PLL_CFG[0] */ +#define HID1_PC1 (1<<15) /* 7450 PLL_CFG[1] */ +#define HID1_PC2 (1<<14) /* 7450 PLL_CFG[2] */ +#define HID1_PC3 (1<<13) /* 7450 PLL_CFG[3] */ +#define HID1_SYNCBE (1<<11) /* 7450 ABE for sync, eieio */ +#define HID1_ABE (1<<10) /* 7450 Address Broadcast Enable */ +#define HID1_PS (1<<16) /* 750FX PLL selection */ +#define SPRN_HID2 0x3F8 /* Hardware Implementation Register 2 */ +#define SPRN_IABR 0x3F2 /* Instruction Address Breakpoint Register */ +#define SPRN_IABR2 0x3FA /* 83xx */ +#define SPRN_IBCR 0x135 /* 83xx Insn Breakpoint Control Reg */ +#define SPRN_HID4 0x3F4 /* 970 HID4 */ +#define SPRN_HID5 0x3F6 /* 970 HID5 */ +#define SPRN_HID6 0x3F9 /* BE HID 6 */ +#define HID6_LB (0x0F<<12) /* Concurrent Large Page Modes */ +#define HID6_DLP (1<<20) /* Disable all large page modes (4K only) */ +#define SPRN_TSC_CELL 0x399 /* Thread switch control on Cell */ +#define TSC_CELL_DEC_ENABLE_0 0x400000 /* Decrementer Interrupt */ +#define TSC_CELL_DEC_ENABLE_1 0x200000 /* Decrementer Interrupt */ +#define TSC_CELL_EE_ENABLE 0x100000 /* External Interrupt */ +#define TSC_CELL_EE_BOOST 0x080000 /* External Interrupt Boost */ +#define SPRN_TSC 0x3FD /* Thread switch control on others */ +#define SPRN_TST 0x3FC /* Thread switch timeout on others */ +#if !defined(SPRN_IAC1) && !defined(SPRN_IAC2) +#define SPRN_IAC1 0x3F4 /* Instruction Address Compare 1 */ +#define SPRN_IAC2 0x3F5 /* Instruction Address Compare 2 */ +#endif +#define SPRN_IBAT0L 0x211 /* Instruction BAT 0 Lower Register */ +#define SPRN_IBAT0U 0x210 /* Instruction BAT 0 Upper Register */ +#define SPRN_IBAT1L 0x213 /* Instruction BAT 1 Lower Register */ +#define SPRN_IBAT1U 0x212 /* Instruction BAT 1 Upper Register */ +#define SPRN_IBAT2L 0x215 /* Instruction BAT 2 Lower Register */ +#define SPRN_IBAT2U 0x214 /* Instruction BAT 2 Upper Register */ +#define SPRN_IBAT3L 0x217 /* Instruction BAT 3 Lower Register */ +#define SPRN_IBAT3U 0x216 /* Instruction BAT 3 Upper Register */ +#define SPRN_IBAT4L 0x231 /* Instruction BAT 4 Lower Register */ +#define SPRN_IBAT4U 0x230 /* Instruction BAT 4 Upper Register */ +#define SPRN_IBAT5L 0x233 /* Instruction BAT 5 Lower Register */ +#define SPRN_IBAT5U 0x232 /* Instruction BAT 5 Upper Register */ +#define SPRN_IBAT6L 0x235 /* Instruction BAT 6 Lower Register */ +#define SPRN_IBAT6U 0x234 /* Instruction BAT 6 Upper Register */ +#define SPRN_IBAT7L 0x237 /* Instruction BAT 7 Lower Register */ +#define SPRN_IBAT7U 0x236 /* Instruction BAT 7 Upper Register */ +#define SPRN_ICMP 0x3D5 /* Instruction TLB Compare Register */ +#define SPRN_ICTC 0x3FB /* Instruction Cache Throttling Control Reg */ +#define SPRN_ICTRL 0x3F3 /* 1011 7450 icache and interrupt ctrl */ +#define ICTRL_EICE 0x08000000 /* enable icache parity errs */ +#define ICTRL_EDC 0x04000000 /* enable dcache parity errs */ +#define ICTRL_EICP 0x00000100 /* enable icache par. check */ +#define SPRN_IMISS 0x3D4 /* Instruction TLB Miss Register */ +#define SPRN_IMMR 0x27E /* Internal Memory Map Register */ +#define SPRN_L2CR 0x3F9 /* Level 2 Cache Control Regsiter */ +#define SPRN_L2CR2 0x3f8 +#define L2CR_L2E 0x80000000 /* L2 enable */ +#define L2CR_L2PE 0x40000000 /* L2 parity enable */ +#define L2CR_L2SIZ_MASK 0x30000000 /* L2 size mask */ +#define L2CR_L2SIZ_256KB 0x10000000 /* L2 size 256KB */ +#define L2CR_L2SIZ_512KB 0x20000000 /* L2 size 512KB */ +#define L2CR_L2SIZ_1MB 0x30000000 /* L2 size 1MB */ +#define L2CR_L2CLK_MASK 0x0e000000 /* L2 clock mask */ +#define L2CR_L2CLK_DISABLED 0x00000000 /* L2 clock disabled */ +#define L2CR_L2CLK_DIV1 0x02000000 /* L2 clock / 1 */ +#define L2CR_L2CLK_DIV1_5 0x04000000 /* L2 clock / 1.5 */ +#define L2CR_L2CLK_DIV2 0x08000000 /* L2 clock / 2 */ +#define L2CR_L2CLK_DIV2_5 0x0a000000 /* L2 clock / 2.5 */ +#define L2CR_L2CLK_DIV3 0x0c000000 /* L2 clock / 3 */ +#define L2CR_L2RAM_MASK 0x01800000 /* L2 RAM type mask */ +#define L2CR_L2RAM_FLOW 0x00000000 /* L2 RAM flow through */ +#define L2CR_L2RAM_PIPE 0x01000000 /* L2 RAM pipelined */ +#define L2CR_L2RAM_PIPE_LW 0x01800000 /* L2 RAM pipelined latewr */ +#define L2CR_L2DO 0x00400000 /* L2 data only */ +#define L2CR_L2I 0x00200000 /* L2 global invalidate */ +#define L2CR_L2CTL 0x00100000 /* L2 RAM control */ +#define L2CR_L2WT 0x00080000 /* L2 write-through */ +#define L2CR_L2TS 0x00040000 /* L2 test support */ +#define L2CR_L2OH_MASK 0x00030000 /* L2 output hold mask */ +#define L2CR_L2OH_0_5 0x00000000 /* L2 output hold 0.5 ns */ +#define L2CR_L2OH_1_0 0x00010000 /* L2 output hold 1.0 ns */ +#define L2CR_L2SL 0x00008000 /* L2 DLL slow */ +#define L2CR_L2DF 0x00004000 /* L2 differential clock */ +#define L2CR_L2BYP 0x00002000 /* L2 DLL bypass */ +#define L2CR_L2IP 0x00000001 /* L2 GI in progress */ +#define L2CR_L2IO_745x 0x00100000 /* L2 instr. only (745x) */ +#define L2CR_L2DO_745x 0x00010000 /* L2 data only (745x) */ +#define L2CR_L2REP_745x 0x00001000 /* L2 repl. algorithm (745x) */ +#define L2CR_L2HWF_745x 0x00000800 /* L2 hardware flush (745x) */ +#define SPRN_L3CR 0x3FA /* Level 3 Cache Control Regsiter */ +#define L3CR_L3E 0x80000000 /* L3 enable */ +#define L3CR_L3PE 0x40000000 /* L3 data parity enable */ +#define L3CR_L3APE 0x20000000 /* L3 addr parity enable */ +#define L3CR_L3SIZ 0x10000000 /* L3 size */ +#define L3CR_L3CLKEN 0x08000000 /* L3 clock enable */ +#define L3CR_L3RES 0x04000000 /* L3 special reserved bit */ +#define L3CR_L3CLKDIV 0x03800000 /* L3 clock divisor */ +#define L3CR_L3IO 0x00400000 /* L3 instruction only */ +#define L3CR_L3SPO 0x00040000 /* L3 sample point override */ +#define L3CR_L3CKSP 0x00030000 /* L3 clock sample point */ +#define L3CR_L3PSP 0x0000e000 /* L3 P-clock sample point */ +#define L3CR_L3REP 0x00001000 /* L3 replacement algorithm */ +#define L3CR_L3HWF 0x00000800 /* L3 hardware flush */ +#define L3CR_L3I 0x00000400 /* L3 global invalidate */ +#define L3CR_L3RT 0x00000300 /* L3 SRAM type */ +#define L3CR_L3NIRCA 0x00000080 /* L3 non-integer ratio clock adj. */ +#define L3CR_L3DO 0x00000040 /* L3 data only mode */ +#define L3CR_PMEN 0x00000004 /* L3 private memory enable */ +#define L3CR_PMSIZ 0x00000001 /* L3 private memory size */ + +#define SPRN_MSSCR0 0x3f6 /* Memory Subsystem Control Register 0 */ +#define SPRN_MSSSR0 0x3f7 /* Memory Subsystem Status Register 1 */ +#define SPRN_LDSTCR 0x3f8 /* Load/Store control register */ +#define SPRN_LDSTDB 0x3f4 /* */ +#define SPRN_LR 0x008 /* Link Register */ +#ifndef SPRN_PIR +#define SPRN_PIR 0x3FF /* Processor Identification Register */ +#endif +#define SPRN_PTEHI 0x3D5 /* 981 7450 PTE HI word (S/W TLB load) */ +#define SPRN_PTELO 0x3D6 /* 982 7450 PTE LO word (S/W TLB load) */ +#define SPRN_PURR 0x135 /* Processor Utilization of Resources Reg */ +#define SPRN_PVR 0x11F /* Processor Version Register */ +#define SPRN_RPA 0x3D6 /* Required Physical Address Register */ +#define SPRN_SDA 0x3BF /* Sampled Data Address Register */ +#define SPRN_SDR1 0x019 /* MMU Hash Base Register */ +#define SPRN_ASR 0x118 /* Address Space Register */ +#define SPRN_SIA 0x3BB /* Sampled Instruction Address Register */ +#define SPRN_SPRG0 0x110 /* Special Purpose Register General 0 */ +#define SPRN_SPRG1 0x111 /* Special Purpose Register General 1 */ +#define SPRN_SPRG2 0x112 /* Special Purpose Register General 2 */ +#define SPRN_SPRG3 0x113 /* Special Purpose Register General 3 */ +#define SPRN_SPRG4 0x114 /* Special Purpose Register General 4 */ +#define SPRN_SPRG5 0x115 /* Special Purpose Register General 5 */ +#define SPRN_SPRG6 0x116 /* Special Purpose Register General 6 */ +#define SPRN_SPRG7 0x117 /* Special Purpose Register General 7 */ +#define SPRN_SRR0 0x01A /* Save/Restore Register 0 */ +#define SPRN_SRR1 0x01B /* Save/Restore Register 1 */ +#define SRR1_WAKEMASK 0x00380000 /* reason for wakeup */ +#define SRR1_WAKERESET 0x00380000 /* System reset */ +#define SRR1_WAKESYSERR 0x00300000 /* System error */ +#define SRR1_WAKEEE 0x00200000 /* External interrupt */ +#define SRR1_WAKEMT 0x00280000 /* mtctrl */ +#define SRR1_WAKEDEC 0x00180000 /* Decrementer interrupt */ +#define SRR1_WAKETHERM 0x00100000 /* Thermal management interrupt */ +#define SPRN_HSRR0 0x13A /* Save/Restore Register 0 */ +#define SPRN_HSRR1 0x13B /* Save/Restore Register 1 */ + +#define SPRN_TBCTL 0x35f /* PA6T Timebase control register */ +#define TBCTL_FREEZE 0x0000000000000000ull /* Freeze all tbs */ +#define TBCTL_RESTART 0x0000000100000000ull /* Restart all tbs */ +#define TBCTL_UPDATE_UPPER 0x0000000200000000ull /* Set upper 32 bits */ +#define TBCTL_UPDATE_LOWER 0x0000000300000000ull /* Set lower 32 bits */ + +#ifndef SPRN_SVR +#define SPRN_SVR 0x11E /* System Version Register */ +#endif +#define SPRN_THRM1 0x3FC /* Thermal Management Register 1 */ +/* these bits were defined in inverted endian sense originally, ugh, confusing */ +#define THRM1_TIN (1 << 31) +#define THRM1_TIV (1 << 30) +#define THRM1_THRES(x) ((x&0x7f)<<23) +#define THRM3_SITV(x) ((x&0x3fff)<<1) +#define THRM1_TID (1<<2) +#define THRM1_TIE (1<<1) +#define THRM1_V (1<<0) +#define SPRN_THRM2 0x3FD /* Thermal Management Register 2 */ +#define SPRN_THRM3 0x3FE /* Thermal Management Register 3 */ +#define THRM3_E (1<<0) +#define SPRN_TLBMISS 0x3D4 /* 980 7450 TLB Miss Register */ +#define SPRN_UMMCR0 0x3A8 /* User Monitor Mode Control Register 0 */ +#define SPRN_UMMCR1 0x3AC /* User Monitor Mode Control Register 0 */ +#define SPRN_UPMC1 0x3A9 /* User Performance Counter Register 1 */ +#define SPRN_UPMC2 0x3AA /* User Performance Counter Register 2 */ +#define SPRN_UPMC3 0x3AD /* User Performance Counter Register 3 */ +#define SPRN_UPMC4 0x3AE /* User Performance Counter Register 4 */ +#define SPRN_USIA 0x3AB /* User Sampled Instruction Address Register */ +#define SPRN_VRSAVE 0x100 /* Vector Register Save Register */ +#define SPRN_XER 0x001 /* Fixed Point Exception Register */ + +#define SPRN_SCOMC 0x114 /* SCOM Access Control */ +#define SPRN_SCOMD 0x115 /* SCOM Access DATA */ + +/* Performance monitor SPRs */ +#ifdef CONFIG_PPC64 +#define SPRN_MMCR0 795 +#define MMCR0_FC 0x80000000UL /* freeze counters */ +#define MMCR0_FCS 0x40000000UL /* freeze in supervisor state */ +#define MMCR0_KERNEL_DISABLE MMCR0_FCS +#define MMCR0_FCP 0x20000000UL /* freeze in problem state */ +#define MMCR0_PROBLEM_DISABLE MMCR0_FCP +#define MMCR0_FCM1 0x10000000UL /* freeze counters while MSR mark = 1 */ +#define MMCR0_FCM0 0x08000000UL /* freeze counters while MSR mark = 0 */ +#define MMCR0_PMXE 0x04000000UL /* performance monitor exception enable */ +#define MMCR0_FCECE 0x02000000UL /* freeze ctrs on enabled cond or event */ +#define MMCR0_TBEE 0x00400000UL /* time base exception enable */ +#define MMCR0_PMC1CE 0x00008000UL /* PMC1 count enable*/ +#define MMCR0_PMCjCE 0x00004000UL /* PMCj count enable*/ +#define MMCR0_TRIGGER 0x00002000UL /* TRIGGER enable */ +#define MMCR0_PMAO 0x00000080UL /* performance monitor alert has occurred, set to 0 after handling exception */ +#define MMCR0_SHRFC 0x00000040UL /* SHRre freeze conditions between threads */ +#define MMCR0_FCTI 0x00000008UL /* freeze counters in tags inactive mode */ +#define MMCR0_FCTA 0x00000004UL /* freeze counters in tags active mode */ +#define MMCR0_FCWAIT 0x00000002UL /* freeze counter in WAIT state */ +#define MMCR0_FCHV 0x00000001UL /* freeze conditions in hypervisor mode */ +#define SPRN_MMCR1 798 +#define SPRN_MMCRA 0x312 +#define MMCRA_SIHV 0x10000000UL /* state of MSR HV when SIAR set */ +#define MMCRA_SIPR 0x08000000UL /* state of MSR PR when SIAR set */ +#define MMCRA_SLOT 0x07000000UL /* SLOT bits (37-39) */ +#define MMCRA_SLOT_SHIFT 24 +#define MMCRA_SAMPLE_ENABLE 0x00000001UL /* enable sampling */ +#define POWER6_MMCRA_SIHV 0x0000040000000000ULL +#define POWER6_MMCRA_SIPR 0x0000020000000000ULL +#define POWER6_MMCRA_THRM 0x00000020UL +#define POWER6_MMCRA_OTHER 0x0000000EUL +#define SPRN_PMC1 787 +#define SPRN_PMC2 788 +#define SPRN_PMC3 789 +#define SPRN_PMC4 790 +#define SPRN_PMC5 791 +#define SPRN_PMC6 792 +#define SPRN_PMC7 793 +#define SPRN_PMC8 794 +#define SPRN_SIAR 780 +#define SPRN_SDAR 781 + +#define SPRN_PA6T_MMCR0 795 +#define PA6T_MMCR0_EN0 0x0000000000000001UL +#define PA6T_MMCR0_EN1 0x0000000000000002UL +#define PA6T_MMCR0_EN2 0x0000000000000004UL +#define PA6T_MMCR0_EN3 0x0000000000000008UL +#define PA6T_MMCR0_EN4 0x0000000000000010UL +#define PA6T_MMCR0_EN5 0x0000000000000020UL +#define PA6T_MMCR0_SUPEN 0x0000000000000040UL +#define PA6T_MMCR0_PREN 0x0000000000000080UL +#define PA6T_MMCR0_HYPEN 0x0000000000000100UL +#define PA6T_MMCR0_FCM0 0x0000000000000200UL +#define PA6T_MMCR0_FCM1 0x0000000000000400UL +#define PA6T_MMCR0_INTGEN 0x0000000000000800UL +#define PA6T_MMCR0_INTEN0 0x0000000000001000UL +#define PA6T_MMCR0_INTEN1 0x0000000000002000UL +#define PA6T_MMCR0_INTEN2 0x0000000000004000UL +#define PA6T_MMCR0_INTEN3 0x0000000000008000UL +#define PA6T_MMCR0_INTEN4 0x0000000000010000UL +#define PA6T_MMCR0_INTEN5 0x0000000000020000UL +#define PA6T_MMCR0_DISCNT 0x0000000000040000UL +#define PA6T_MMCR0_UOP 0x0000000000080000UL +#define PA6T_MMCR0_TRG 0x0000000000100000UL +#define PA6T_MMCR0_TRGEN 0x0000000000200000UL +#define PA6T_MMCR0_TRGREG 0x0000000001600000UL +#define PA6T_MMCR0_SIARLOG 0x0000000002000000UL +#define PA6T_MMCR0_SDARLOG 0x0000000004000000UL +#define PA6T_MMCR0_PROEN 0x0000000008000000UL +#define PA6T_MMCR0_PROLOG 0x0000000010000000UL +#define PA6T_MMCR0_DAMEN2 0x0000000020000000UL +#define PA6T_MMCR0_DAMEN3 0x0000000040000000UL +#define PA6T_MMCR0_DAMEN4 0x0000000080000000UL +#define PA6T_MMCR0_DAMEN5 0x0000000100000000UL +#define PA6T_MMCR0_DAMSEL2 0x0000000200000000UL +#define PA6T_MMCR0_DAMSEL3 0x0000000400000000UL +#define PA6T_MMCR0_DAMSEL4 0x0000000800000000UL +#define PA6T_MMCR0_DAMSEL5 0x0000001000000000UL +#define PA6T_MMCR0_HANDDIS 0x0000002000000000UL +#define PA6T_MMCR0_PCTEN 0x0000004000000000UL +#define PA6T_MMCR0_SOCEN 0x0000008000000000UL +#define PA6T_MMCR0_SOCMOD 0x0000010000000000UL + +#define SPRN_PA6T_MMCR1 798 +#define PA6T_MMCR1_ES2 0x00000000000000ffUL +#define PA6T_MMCR1_ES3 0x000000000000ff00UL +#define PA6T_MMCR1_ES4 0x0000000000ff0000UL +#define PA6T_MMCR1_ES5 0x00000000ff000000UL + +#define SPRN_PA6T_UPMC0 771 /* User PerfMon Counter 0 */ +#define SPRN_PA6T_UPMC1 772 /* ... */ +#define SPRN_PA6T_UPMC2 773 +#define SPRN_PA6T_UPMC3 774 +#define SPRN_PA6T_UPMC4 775 +#define SPRN_PA6T_UPMC5 776 +#define SPRN_PA6T_UMMCR0 779 /* User Monitor Mode Control Register 0 */ +#define SPRN_PA6T_SIAR 780 /* Sampled Instruction Address */ +#define SPRN_PA6T_UMMCR1 782 /* User Monitor Mode Control Register 1 */ +#define SPRN_PA6T_SIER 785 /* Sampled Instruction Event Register */ +#define SPRN_PA6T_PMC0 787 +#define SPRN_PA6T_PMC1 788 +#define SPRN_PA6T_PMC2 789 +#define SPRN_PA6T_PMC3 790 +#define SPRN_PA6T_PMC4 791 +#define SPRN_PA6T_PMC5 792 +#define SPRN_PA6T_TSR0 793 /* Timestamp Register 0 */ +#define SPRN_PA6T_TSR1 794 /* Timestamp Register 1 */ +#define SPRN_PA6T_TSR2 799 /* Timestamp Register 2 */ +#define SPRN_PA6T_TSR3 784 /* Timestamp Register 3 */ + +#define SPRN_PA6T_IER 981 /* Icache Error Register */ +#define SPRN_PA6T_DER 982 /* Dcache Error Register */ +#define SPRN_PA6T_BER 862 /* BIU Error Address Register */ +#define SPRN_PA6T_MER 849 /* MMU Error Register */ + +#define SPRN_PA6T_IMA0 880 /* Instruction Match Array 0 */ +#define SPRN_PA6T_IMA1 881 /* ... */ +#define SPRN_PA6T_IMA2 882 +#define SPRN_PA6T_IMA3 883 +#define SPRN_PA6T_IMA4 884 +#define SPRN_PA6T_IMA5 885 +#define SPRN_PA6T_IMA6 886 +#define SPRN_PA6T_IMA7 887 +#define SPRN_PA6T_IMA8 888 +#define SPRN_PA6T_IMA9 889 +#define SPRN_PA6T_BTCR 978 /* Breakpoint and Tagging Control Register */ +#define SPRN_PA6T_IMAAT 979 /* Instruction Match Array Action Table */ +#define SPRN_PA6T_PCCR 1019 /* Power Counter Control Register */ +#define SPRN_BKMK 1020 /* Cell Bookmark Register */ +#define SPRN_PA6T_RPCCR 1021 /* Retire PC Trace Control Register */ + + +#else /* 32-bit */ +#define SPRN_MMCR0 952 /* Monitor Mode Control Register 0 */ +#define MMCR0_FC 0x80000000UL /* freeze counters */ +#define MMCR0_FCS 0x40000000UL /* freeze in supervisor state */ +#define MMCR0_FCP 0x20000000UL /* freeze in problem state */ +#define MMCR0_FCM1 0x10000000UL /* freeze counters while MSR mark = 1 */ +#define MMCR0_FCM0 0x08000000UL /* freeze counters while MSR mark = 0 */ +#define MMCR0_PMXE 0x04000000UL /* performance monitor exception enable */ +#define MMCR0_FCECE 0x02000000UL /* freeze ctrs on enabled cond or event */ +#define MMCR0_TBEE 0x00400000UL /* time base exception enable */ +#define MMCR0_PMC1CE 0x00008000UL /* PMC1 count enable*/ +#define MMCR0_PMCnCE 0x00004000UL /* count enable for all but PMC 1*/ +#define MMCR0_TRIGGER 0x00002000UL /* TRIGGER enable */ +#define MMCR0_PMC1SEL 0x00001fc0UL /* PMC 1 Event */ +#define MMCR0_PMC2SEL 0x0000003fUL /* PMC 2 Event */ + +#define SPRN_MMCR1 956 +#define MMCR1_PMC3SEL 0xf8000000UL /* PMC 3 Event */ +#define MMCR1_PMC4SEL 0x07c00000UL /* PMC 4 Event */ +#define MMCR1_PMC5SEL 0x003e0000UL /* PMC 5 Event */ +#define MMCR1_PMC6SEL 0x0001f800UL /* PMC 6 Event */ +#define SPRN_MMCR2 944 +#define SPRN_PMC1 953 /* Performance Counter Register 1 */ +#define SPRN_PMC2 954 /* Performance Counter Register 2 */ +#define SPRN_PMC3 957 /* Performance Counter Register 3 */ +#define SPRN_PMC4 958 /* Performance Counter Register 4 */ +#define SPRN_PMC5 945 /* Performance Counter Register 5 */ +#define SPRN_PMC6 946 /* Performance Counter Register 6 */ + +#define SPRN_SIAR 955 /* Sampled Instruction Address Register */ + +/* Bit definitions for MMCR0 and PMC1 / PMC2. */ +#define MMCR0_PMC1_CYCLES (1 << 7) +#define MMCR0_PMC1_ICACHEMISS (5 << 7) +#define MMCR0_PMC1_DTLB (6 << 7) +#define MMCR0_PMC2_DCACHEMISS 0x6 +#define MMCR0_PMC2_CYCLES 0x1 +#define MMCR0_PMC2_ITLB 0x7 +#define MMCR0_PMC2_LOADMISSTIME 0x5 +#endif + +/* + * An mtfsf instruction with the L bit set. On CPUs that support this a + * full 64bits of FPSCR is restored and on other CPUs the L bit is ignored. + * + * Until binutils gets the new form of mtfsf, hardwire the instruction. + */ +#ifdef CONFIG_PPC64 +#define MTFSF_L(REG) \ + .long (0xfc00058e | ((0xff) << 17) | ((REG) << 11) | (1 << 25)) +#else +#define MTFSF_L(REG) mtfsf 0xff, (REG) +#endif + +/* Processor Version Register (PVR) field extraction */ + +#define PVR_VER(pvr) (((pvr) >> 16) & 0xFFFF) /* Version field */ +#define PVR_REV(pvr) (((pvr) >> 0) & 0xFFFF) /* Revison field */ + +#define __is_processor(pv) (PVR_VER(mfspr(SPRN_PVR)) == (pv)) + +/* + * IBM has further subdivided the standard PowerPC 16-bit version and + * revision subfields of the PVR for the PowerPC 403s into the following: + */ + +#define PVR_FAM(pvr) (((pvr) >> 20) & 0xFFF) /* Family field */ +#define PVR_MEM(pvr) (((pvr) >> 16) & 0xF) /* Member field */ +#define PVR_CORE(pvr) (((pvr) >> 12) & 0xF) /* Core field */ +#define PVR_CFG(pvr) (((pvr) >> 8) & 0xF) /* Configuration field */ +#define PVR_MAJ(pvr) (((pvr) >> 4) & 0xF) /* Major revision field */ +#define PVR_MIN(pvr) (((pvr) >> 0) & 0xF) /* Minor revision field */ + +/* Processor Version Numbers */ + +#define PVR_403GA 0x00200000 +#define PVR_403GB 0x00200100 +#define PVR_403GC 0x00200200 +#define PVR_403GCX 0x00201400 +#define PVR_405GP 0x40110000 +#define PVR_STB03XXX 0x40310000 +#define PVR_NP405H 0x41410000 +#define PVR_NP405L 0x41610000 +#define PVR_601 0x00010000 +#define PVR_602 0x00050000 +#define PVR_603 0x00030000 +#define PVR_603e 0x00060000 +#define PVR_603ev 0x00070000 +#define PVR_603r 0x00071000 +#define PVR_604 0x00040000 +#define PVR_604e 0x00090000 +#define PVR_604r 0x000A0000 +#define PVR_620 0x00140000 +#define PVR_740 0x00080000 +#define PVR_750 PVR_740 +#define PVR_740P 0x10080000 +#define PVR_750P PVR_740P +#define PVR_7400 0x000C0000 +#define PVR_7410 0x800C0000 +#define PVR_7450 0x80000000 +#define PVR_8540 0x80200000 +#define PVR_8560 0x80200000 +/* + * For the 8xx processors, all of them report the same PVR family for + * the PowerPC core. The various versions of these processors must be + * differentiated by the version number in the Communication Processor + * Module (CPM). + */ +#define PVR_821 0x00500000 +#define PVR_823 PVR_821 +#define PVR_850 PVR_821 +#define PVR_860 PVR_821 +#define PVR_8240 0x00810100 +#define PVR_8245 0x80811014 +#define PVR_8260 PVR_8240 + +/* 64-bit processors */ +/* XXX the prefix should be PVR_, we'll do a global sweep to fix it one day */ +#define PV_NORTHSTAR 0x0033 +#define PV_PULSAR 0x0034 +#define PV_POWER4 0x0035 +#define PV_ICESTAR 0x0036 +#define PV_SSTAR 0x0037 +#define PV_POWER4p 0x0038 +#define PV_970 0x0039 +#define PV_POWER5 0x003A +#define PV_POWER5p 0x003B +#define PV_970FX 0x003C +#define PV_630 0x0040 +#define PV_630p 0x0041 +#define PV_970MP 0x0044 +#define PV_970GX 0x0045 +#define PV_BE 0x0070 +#define PV_PA6T 0x0090 + +/* Macros for setting and retrieving special purpose registers */ +#ifndef __ASSEMBLY__ +#define mfmsr() ({unsigned long rval; \ + asm volatile("mfmsr %0" : "=r" (rval)); rval;}) +#ifdef CONFIG_PPC64 +#define __mtmsrd(v, l) asm volatile("mtmsrd %0," __stringify(l) \ + : : "r" (v)) +#define mtmsrd(v) __mtmsrd((v), 0) +#define mtmsr(v) mtmsrd(v) +#else +#define mtmsr(v) asm volatile("mtmsr %0" : : "r" (v)) +#endif + +#define mfspr(rn) ({unsigned long rval; \ + asm volatile("mfspr %0," __stringify(rn) \ + : "=r" (rval)); rval;}) +#define mtspr(rn, v) asm volatile("mtspr " __stringify(rn) ",%0" : : "r" (v)) + +#ifdef __powerpc64__ +#ifdef CONFIG_PPC_CELL +#define mftb() ({unsigned long rval; \ + asm volatile( \ + "90: mftb %0;\n" \ + "97: cmpwi %0,0;\n" \ + " beq- 90b;\n" \ + "99:\n" \ + ".section __ftr_fixup,\"a\"\n" \ + ".align 3\n" \ + "98:\n" \ + " .llong %1\n" \ + " .llong %1\n" \ + " .llong 97b-98b\n" \ + " .llong 99b-98b\n" \ + " .llong 0\n" \ + " .llong 0\n" \ + ".previous" \ + : "=r" (rval) : "i" (CPU_FTR_CELL_TB_BUG)); rval;}) +#else +#define mftb() ({unsigned long rval; \ + asm volatile("mftb %0" : "=r" (rval)); rval;}) +#endif /* !CONFIG_PPC_CELL */ + +#else /* __powerpc64__ */ + +#define mftbl() ({unsigned long rval; \ + asm volatile("mftbl %0" : "=r" (rval)); rval;}) +#define mftbu() ({unsigned long rval; \ + asm volatile("mftbu %0" : "=r" (rval)); rval;}) +#endif /* !__powerpc64__ */ + +#define mttbl(v) asm volatile("mttbl %0":: "r"(v)) +#define mttbu(v) asm volatile("mttbu %0":: "r"(v)) + +#ifdef CONFIG_PPC32 +#define mfsrin(v) ({unsigned int rval; \ + asm volatile("mfsrin %0,%1" : "=r" (rval) : "r" (v)); \ + rval;}) +#endif + +#define proc_trap() asm volatile("trap") + +#ifdef CONFIG_PPC64 + +extern void ppc64_runlatch_on(void); +extern void ppc64_runlatch_off(void); + +extern unsigned long scom970_read(unsigned int address); +extern void scom970_write(unsigned int address, unsigned long value); + +#else +#define ppc64_runlatch_on() +#define ppc64_runlatch_off() + +#endif /* CONFIG_PPC64 */ + +#define __get_SP() ({unsigned long sp; \ + asm volatile("mr %0,1": "=r" (sp)); sp;}) + +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_REG_H */ diff --git a/arch/powerpc/include/asm/reg_8xx.h b/arch/powerpc/include/asm/reg_8xx.h new file mode 100644 index 00000000000..e8ea346b21d --- /dev/null +++ b/arch/powerpc/include/asm/reg_8xx.h @@ -0,0 +1,42 @@ +/* + * Contains register definitions common to PowerPC 8xx CPUs. Notice + */ +#ifndef _ASM_POWERPC_REG_8xx_H +#define _ASM_POWERPC_REG_8xx_H + +/* Cache control on the MPC8xx is provided through some additional + * special purpose registers. + */ +#define SPRN_IC_CST 560 /* Instruction cache control/status */ +#define SPRN_IC_ADR 561 /* Address needed for some commands */ +#define SPRN_IC_DAT 562 /* Read-only data register */ +#define SPRN_DC_CST 568 /* Data cache control/status */ +#define SPRN_DC_ADR 569 /* Address needed for some commands */ +#define SPRN_DC_DAT 570 /* Read-only data register */ + +/* Commands. Only the first few are available to the instruction cache. +*/ +#define IDC_ENABLE 0x02000000 /* Cache enable */ +#define IDC_DISABLE 0x04000000 /* Cache disable */ +#define IDC_LDLCK 0x06000000 /* Load and lock */ +#define IDC_UNLINE 0x08000000 /* Unlock line */ +#define IDC_UNALL 0x0a000000 /* Unlock all */ +#define IDC_INVALL 0x0c000000 /* Invalidate all */ + +#define DC_FLINE 0x0e000000 /* Flush data cache line */ +#define DC_SFWT 0x01000000 /* Set forced writethrough mode */ +#define DC_CFWT 0x03000000 /* Clear forced writethrough mode */ +#define DC_SLES 0x05000000 /* Set little endian swap mode */ +#define DC_CLES 0x07000000 /* Clear little endian swap mode */ + +/* Status. +*/ +#define IDC_ENABLED 0x80000000 /* Cache is enabled */ +#define IDC_CERR1 0x00200000 /* Cache error 1 */ +#define IDC_CERR2 0x00100000 /* Cache error 2 */ +#define IDC_CERR3 0x00080000 /* Cache error 3 */ + +#define DC_DFWT 0x40000000 /* Data cache is forced write through */ +#define DC_LES 0x20000000 /* Caches are little endian mode */ + +#endif /* _ASM_POWERPC_REG_8xx_H */ diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h new file mode 100644 index 00000000000..be980f4ee49 --- /dev/null +++ b/arch/powerpc/include/asm/reg_booke.h @@ -0,0 +1,501 @@ +/* + * Contains register definitions common to the Book E PowerPC + * specification. Notice that while the IBM-40x series of CPUs + * are not true Book E PowerPCs, they borrowed a number of features + * before Book E was finalized, and are included here as well. Unfortunatly, + * they sometimes used different locations than true Book E CPUs did. + */ +#ifdef __KERNEL__ +#ifndef __ASM_POWERPC_REG_BOOKE_H__ +#define __ASM_POWERPC_REG_BOOKE_H__ + +/* Machine State Register (MSR) Fields */ +#define MSR_UCLE (1<<26) /* User-mode cache lock enable */ +#define MSR_SPE (1<<25) /* Enable SPE */ +#define MSR_DWE (1<<10) /* Debug Wait Enable */ +#define MSR_UBLE (1<<10) /* BTB lock enable (e500) */ +#define MSR_IS MSR_IR /* Instruction Space */ +#define MSR_DS MSR_DR /* Data Space */ +#define MSR_PMM (1<<2) /* Performance monitor mark bit */ + +/* Default MSR for kernel mode. */ +#if defined (CONFIG_40x) +#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE) +#elif defined(CONFIG_BOOKE) +#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_CE) +#endif + +/* Special Purpose Registers (SPRNs)*/ +#define SPRN_DECAR 0x036 /* Decrementer Auto Reload Register */ +#define SPRN_IVPR 0x03F /* Interrupt Vector Prefix Register */ +#define SPRN_USPRG0 0x100 /* User Special Purpose Register General 0 */ +#define SPRN_SPRG4R 0x104 /* Special Purpose Register General 4 Read */ +#define SPRN_SPRG5R 0x105 /* Special Purpose Register General 5 Read */ +#define SPRN_SPRG6R 0x106 /* Special Purpose Register General 6 Read */ +#define SPRN_SPRG7R 0x107 /* Special Purpose Register General 7 Read */ +#define SPRN_SPRG4W 0x114 /* Special Purpose Register General 4 Write */ +#define SPRN_SPRG5W 0x115 /* Special Purpose Register General 5 Write */ +#define SPRN_SPRG6W 0x116 /* Special Purpose Register General 6 Write */ +#define SPRN_SPRG7W 0x117 /* Special Purpose Register General 7 Write */ +#define SPRN_DBCR2 0x136 /* Debug Control Register 2 */ +#define SPRN_IAC3 0x13A /* Instruction Address Compare 3 */ +#define SPRN_IAC4 0x13B /* Instruction Address Compare 4 */ +#define SPRN_DVC1 0x13E /* Data Value Compare Register 1 */ +#define SPRN_DVC2 0x13F /* Data Value Compare Register 2 */ +#define SPRN_IVOR0 0x190 /* Interrupt Vector Offset Register 0 */ +#define SPRN_IVOR1 0x191 /* Interrupt Vector Offset Register 1 */ +#define SPRN_IVOR2 0x192 /* Interrupt Vector Offset Register 2 */ +#define SPRN_IVOR3 0x193 /* Interrupt Vector Offset Register 3 */ +#define SPRN_IVOR4 0x194 /* Interrupt Vector Offset Register 4 */ +#define SPRN_IVOR5 0x195 /* Interrupt Vector Offset Register 5 */ +#define SPRN_IVOR6 0x196 /* Interrupt Vector Offset Register 6 */ +#define SPRN_IVOR7 0x197 /* Interrupt Vector Offset Register 7 */ +#define SPRN_IVOR8 0x198 /* Interrupt Vector Offset Register 8 */ +#define SPRN_IVOR9 0x199 /* Interrupt Vector Offset Register 9 */ +#define SPRN_IVOR10 0x19A /* Interrupt Vector Offset Register 10 */ +#define SPRN_IVOR11 0x19B /* Interrupt Vector Offset Register 11 */ +#define SPRN_IVOR12 0x19C /* Interrupt Vector Offset Register 12 */ +#define SPRN_IVOR13 0x19D /* Interrupt Vector Offset Register 13 */ +#define SPRN_IVOR14 0x19E /* Interrupt Vector Offset Register 14 */ +#define SPRN_IVOR15 0x19F /* Interrupt Vector Offset Register 15 */ +#define SPRN_SPEFSCR 0x200 /* SPE & Embedded FP Status & Control */ +#define SPRN_BBEAR 0x201 /* Branch Buffer Entry Address Register */ +#define SPRN_BBTAR 0x202 /* Branch Buffer Target Address Register */ +#define SPRN_L1CFG0 0x203 /* L1 Cache Configure Register 0 */ +#define SPRN_L1CFG1 0x204 /* L1 Cache Configure Register 1 */ +#define SPRN_ATB 0x20E /* Alternate Time Base */ +#define SPRN_ATBL 0x20E /* Alternate Time Base Lower */ +#define SPRN_ATBU 0x20F /* Alternate Time Base Upper */ +#define SPRN_IVOR32 0x210 /* Interrupt Vector Offset Register 32 */ +#define SPRN_IVOR33 0x211 /* Interrupt Vector Offset Register 33 */ +#define SPRN_IVOR34 0x212 /* Interrupt Vector Offset Register 34 */ +#define SPRN_IVOR35 0x213 /* Interrupt Vector Offset Register 35 */ +#define SPRN_IVOR36 0x214 /* Interrupt Vector Offset Register 36 */ +#define SPRN_IVOR37 0x215 /* Interrupt Vector Offset Register 37 */ +#define SPRN_MCSRR0 0x23A /* Machine Check Save and Restore Register 0 */ +#define SPRN_MCSRR1 0x23B /* Machine Check Save and Restore Register 1 */ +#define SPRN_MCSR 0x23C /* Machine Check Status Register */ +#define SPRN_MCAR 0x23D /* Machine Check Address Register */ +#define SPRN_DSRR0 0x23E /* Debug Save and Restore Register 0 */ +#define SPRN_DSRR1 0x23F /* Debug Save and Restore Register 1 */ +#define SPRN_SPRG8 0x25C /* Special Purpose Register General 8 */ +#define SPRN_SPRG9 0x25D /* Special Purpose Register General 9 */ +#define SPRN_L1CSR2 0x25E /* L1 Cache Control and Status Register 2 */ +#define SPRN_MAS0 0x270 /* MMU Assist Register 0 */ +#define SPRN_MAS1 0x271 /* MMU Assist Register 1 */ +#define SPRN_MAS2 0x272 /* MMU Assist Register 2 */ +#define SPRN_MAS3 0x273 /* MMU Assist Register 3 */ +#define SPRN_MAS4 0x274 /* MMU Assist Register 4 */ +#define SPRN_MAS5 0x275 /* MMU Assist Register 5 */ +#define SPRN_MAS6 0x276 /* MMU Assist Register 6 */ +#define SPRN_PID1 0x279 /* Process ID Register 1 */ +#define SPRN_PID2 0x27A /* Process ID Register 2 */ +#define SPRN_TLB0CFG 0x2B0 /* TLB 0 Config Register */ +#define SPRN_TLB1CFG 0x2B1 /* TLB 1 Config Register */ +#define SPRN_EPR 0x2BE /* External Proxy Register */ +#define SPRN_CCR1 0x378 /* Core Configuration Register 1 */ +#define SPRN_ZPR 0x3B0 /* Zone Protection Register (40x) */ +#define SPRN_MAS7 0x3B0 /* MMU Assist Register 7 */ +#define SPRN_MMUCR 0x3B2 /* MMU Control Register */ +#define SPRN_CCR0 0x3B3 /* Core Configuration Register 0 */ +#define SPRN_EPLC 0x3B3 /* External Process ID Load Context */ +#define SPRN_EPSC 0x3B4 /* External Process ID Store Context */ +#define SPRN_SGR 0x3B9 /* Storage Guarded Register */ +#define SPRN_DCWR 0x3BA /* Data Cache Write-thru Register */ +#define SPRN_SLER 0x3BB /* Little-endian real mode */ +#define SPRN_SU0R 0x3BC /* "User 0" real mode (40x) */ +#define SPRN_DCMP 0x3D1 /* Data TLB Compare Register */ +#define SPRN_ICDBDR 0x3D3 /* Instruction Cache Debug Data Register */ +#define SPRN_EVPR 0x3D6 /* Exception Vector Prefix Register */ +#define SPRN_L1CSR0 0x3F2 /* L1 Cache Control and Status Register 0 */ +#define SPRN_L1CSR1 0x3F3 /* L1 Cache Control and Status Register 1 */ +#define SPRN_PIT 0x3DB /* Programmable Interval Timer */ +#define SPRN_BUCSR 0x3F5 /* Branch Unit Control and Status */ +#define SPRN_L2CSR0 0x3F9 /* L2 Data Cache Control and Status Register 0 */ +#define SPRN_L2CSR1 0x3FA /* L2 Data Cache Control and Status Register 1 */ +#define SPRN_DCCR 0x3FA /* Data Cache Cacheability Register */ +#define SPRN_ICCR 0x3FB /* Instruction Cache Cacheability Register */ +#define SPRN_SVR 0x3FF /* System Version Register */ + +/* + * SPRs which have conflicting definitions on true Book E versus classic, + * or IBM 40x. + */ +#ifdef CONFIG_BOOKE +#define SPRN_PID 0x030 /* Process ID */ +#define SPRN_PID0 SPRN_PID/* Process ID Register 0 */ +#define SPRN_CSRR0 0x03A /* Critical Save and Restore Register 0 */ +#define SPRN_CSRR1 0x03B /* Critical Save and Restore Register 1 */ +#define SPRN_DEAR 0x03D /* Data Error Address Register */ +#define SPRN_ESR 0x03E /* Exception Syndrome Register */ +#define SPRN_PIR 0x11E /* Processor Identification Register */ +#define SPRN_DBSR 0x130 /* Debug Status Register */ +#define SPRN_DBCR0 0x134 /* Debug Control Register 0 */ +#define SPRN_DBCR1 0x135 /* Debug Control Register 1 */ +#define SPRN_IAC1 0x138 /* Instruction Address Compare 1 */ +#define SPRN_IAC2 0x139 /* Instruction Address Compare 2 */ +#define SPRN_DAC1 0x13C /* Data Address Compare 1 */ +#define SPRN_DAC2 0x13D /* Data Address Compare 2 */ +#define SPRN_TSR 0x150 /* Timer Status Register */ +#define SPRN_TCR 0x154 /* Timer Control Register */ +#endif /* Book E */ +#ifdef CONFIG_40x +#define SPRN_PID 0x3B1 /* Process ID */ +#define SPRN_DBCR1 0x3BD /* Debug Control Register 1 */ +#define SPRN_ESR 0x3D4 /* Exception Syndrome Register */ +#define SPRN_DEAR 0x3D5 /* Data Error Address Register */ +#define SPRN_TSR 0x3D8 /* Timer Status Register */ +#define SPRN_TCR 0x3DA /* Timer Control Register */ +#define SPRN_SRR2 0x3DE /* Save/Restore Register 2 */ +#define SPRN_SRR3 0x3DF /* Save/Restore Register 3 */ +#define SPRN_DBSR 0x3F0 /* Debug Status Register */ +#define SPRN_DBCR0 0x3F2 /* Debug Control Register 0 */ +#define SPRN_DAC1 0x3F6 /* Data Address Compare 1 */ +#define SPRN_DAC2 0x3F7 /* Data Address Compare 2 */ +#define SPRN_CSRR0 SPRN_SRR2 /* Critical Save and Restore Register 0 */ +#define SPRN_CSRR1 SPRN_SRR3 /* Critical Save and Restore Register 1 */ +#endif + +/* Bit definitions for CCR1. */ +#define CCR1_DPC 0x00000100 /* Disable L1 I-Cache/D-Cache parity checking */ +#define CCR1_TCS 0x00000080 /* Timer Clock Select */ + +/* Bit definitions for the MCSR. */ +#define MCSR_MCS 0x80000000 /* Machine Check Summary */ +#define MCSR_IB 0x40000000 /* Instruction PLB Error */ +#define MCSR_DRB 0x20000000 /* Data Read PLB Error */ +#define MCSR_DWB 0x10000000 /* Data Write PLB Error */ +#define MCSR_TLBP 0x08000000 /* TLB Parity Error */ +#define MCSR_ICP 0x04000000 /* I-Cache Parity Error */ +#define MCSR_DCSP 0x02000000 /* D-Cache Search Parity Error */ +#define MCSR_DCFP 0x01000000 /* D-Cache Flush Parity Error */ +#define MCSR_IMPE 0x00800000 /* Imprecise Machine Check Exception */ + +#ifdef CONFIG_E500 +#define MCSR_MCP 0x80000000UL /* Machine Check Input Pin */ +#define MCSR_ICPERR 0x40000000UL /* I-Cache Parity Error */ +#define MCSR_DCP_PERR 0x20000000UL /* D-Cache Push Parity Error */ +#define MCSR_DCPERR 0x10000000UL /* D-Cache Parity Error */ +#define MCSR_BUS_IAERR 0x00000080UL /* Instruction Address Error */ +#define MCSR_BUS_RAERR 0x00000040UL /* Read Address Error */ +#define MCSR_BUS_WAERR 0x00000020UL /* Write Address Error */ +#define MCSR_BUS_IBERR 0x00000010UL /* Instruction Data Error */ +#define MCSR_BUS_RBERR 0x00000008UL /* Read Data Bus Error */ +#define MCSR_BUS_WBERR 0x00000004UL /* Write Data Bus Error */ +#define MCSR_BUS_IPERR 0x00000002UL /* Instruction parity Error */ +#define MCSR_BUS_RPERR 0x00000001UL /* Read parity Error */ + +/* e500 parts may set unused bits in MCSR; mask these off */ +#define MCSR_MASK (MCSR_MCP | MCSR_ICPERR | MCSR_DCP_PERR | \ + MCSR_DCPERR | MCSR_BUS_IAERR | MCSR_BUS_RAERR | \ + MCSR_BUS_WAERR | MCSR_BUS_IBERR | MCSR_BUS_RBERR | \ + MCSR_BUS_WBERR | MCSR_BUS_IPERR | MCSR_BUS_RPERR) +#endif +#ifdef CONFIG_E200 +#define MCSR_MCP 0x80000000UL /* Machine Check Input Pin */ +#define MCSR_CP_PERR 0x20000000UL /* Cache Push Parity Error */ +#define MCSR_CPERR 0x10000000UL /* Cache Parity Error */ +#define MCSR_EXCP_ERR 0x08000000UL /* ISI, ITLB, or Bus Error on 1st insn + fetch for an exception handler */ +#define MCSR_BUS_IRERR 0x00000010UL /* Read Bus Error on instruction fetch*/ +#define MCSR_BUS_DRERR 0x00000008UL /* Read Bus Error on data load */ +#define MCSR_BUS_WRERR 0x00000004UL /* Write Bus Error on buffered + store or cache line push */ + +/* e200 parts may set unused bits in MCSR; mask these off */ +#define MCSR_MASK (MCSR_MCP | MCSR_CP_PERR | MCSR_CPERR | \ + MCSR_EXCP_ERR | MCSR_BUS_IRERR | MCSR_BUS_DRERR | \ + MCSR_BUS_WRERR) +#endif + +/* Bit definitions for the DBSR. */ +/* + * DBSR bits which have conflicting definitions on true Book E versus IBM 40x. + */ +#ifdef CONFIG_BOOKE +#define DBSR_IC 0x08000000 /* Instruction Completion */ +#define DBSR_BT 0x04000000 /* Branch Taken */ +#define DBSR_IRPT 0x02000000 /* Exception Debug Event */ +#define DBSR_TIE 0x01000000 /* Trap Instruction Event */ +#define DBSR_IAC1 0x00800000 /* Instr Address Compare 1 Event */ +#define DBSR_IAC2 0x00400000 /* Instr Address Compare 2 Event */ +#define DBSR_IAC3 0x00200000 /* Instr Address Compare 3 Event */ +#define DBSR_IAC4 0x00100000 /* Instr Address Compare 4 Event */ +#define DBSR_DAC1R 0x00080000 /* Data Addr Compare 1 Read Event */ +#define DBSR_DAC1W 0x00040000 /* Data Addr Compare 1 Write Event */ +#define DBSR_DAC2R 0x00020000 /* Data Addr Compare 2 Read Event */ +#define DBSR_DAC2W 0x00010000 /* Data Addr Compare 2 Write Event */ +#define DBSR_RET 0x00008000 /* Return Debug Event */ +#define DBSR_CIRPT 0x00000040 /* Critical Interrupt Taken Event */ +#define DBSR_CRET 0x00000020 /* Critical Return Debug Event */ +#endif +#ifdef CONFIG_40x +#define DBSR_IC 0x80000000 /* Instruction Completion */ +#define DBSR_BT 0x40000000 /* Branch taken */ +#define DBSR_IRPT 0x20000000 /* Exception Debug Event */ +#define DBSR_TIE 0x10000000 /* Trap Instruction debug Event */ +#define DBSR_IAC1 0x04000000 /* Instruction Address Compare 1 Event */ +#define DBSR_IAC2 0x02000000 /* Instruction Address Compare 2 Event */ +#define DBSR_IAC3 0x00080000 /* Instruction Address Compare 3 Event */ +#define DBSR_IAC4 0x00040000 /* Instruction Address Compare 4 Event */ +#define DBSR_DAC1R 0x01000000 /* Data Address Compare 1 Read Event */ +#define DBSR_DAC1W 0x00800000 /* Data Address Compare 1 Write Event */ +#define DBSR_DAC2R 0x00400000 /* Data Address Compare 2 Read Event */ +#define DBSR_DAC2W 0x00200000 /* Data Address Compare 2 Write Event */ +#endif + +/* Bit definitions related to the ESR. */ +#define ESR_MCI 0x80000000 /* Machine Check - Instruction */ +#define ESR_IMCP 0x80000000 /* Instr. Machine Check - Protection */ +#define ESR_IMCN 0x40000000 /* Instr. Machine Check - Non-config */ +#define ESR_IMCB 0x20000000 /* Instr. Machine Check - Bus error */ +#define ESR_IMCT 0x10000000 /* Instr. Machine Check - Timeout */ +#define ESR_PIL 0x08000000 /* Program Exception - Illegal */ +#define ESR_PPR 0x04000000 /* Program Exception - Privileged */ +#define ESR_PTR 0x02000000 /* Program Exception - Trap */ +#define ESR_FP 0x01000000 /* Floating Point Operation */ +#define ESR_DST 0x00800000 /* Storage Exception - Data miss */ +#define ESR_DIZ 0x00400000 /* Storage Exception - Zone fault */ +#define ESR_ST 0x00800000 /* Store Operation */ +#define ESR_DLK 0x00200000 /* Data Cache Locking */ +#define ESR_ILK 0x00100000 /* Instr. Cache Locking */ +#define ESR_PUO 0x00040000 /* Unimplemented Operation exception */ +#define ESR_BO 0x00020000 /* Byte Ordering */ + +/* Bit definitions related to the DBCR0. */ +#if defined(CONFIG_40x) +#define DBCR0_EDM 0x80000000 /* External Debug Mode */ +#define DBCR0_IDM 0x40000000 /* Internal Debug Mode */ +#define DBCR0_RST 0x30000000 /* all the bits in the RST field */ +#define DBCR0_RST_SYSTEM 0x30000000 /* System Reset */ +#define DBCR0_RST_CHIP 0x20000000 /* Chip Reset */ +#define DBCR0_RST_CORE 0x10000000 /* Core Reset */ +#define DBCR0_RST_NONE 0x00000000 /* No Reset */ +#define DBCR0_IC 0x08000000 /* Instruction Completion */ +#define DBCR0_ICMP DBCR0_IC +#define DBCR0_BT 0x04000000 /* Branch Taken */ +#define DBCR0_BRT DBCR0_BT +#define DBCR0_EDE 0x02000000 /* Exception Debug Event */ +#define DBCR0_IRPT DBCR0_EDE +#define DBCR0_TDE 0x01000000 /* TRAP Debug Event */ +#define DBCR0_IA1 0x00800000 /* Instr Addr compare 1 enable */ +#define DBCR0_IAC1 DBCR0_IA1 +#define DBCR0_IA2 0x00400000 /* Instr Addr compare 2 enable */ +#define DBCR0_IAC2 DBCR0_IA2 +#define DBCR0_IA12 0x00200000 /* Instr Addr 1-2 range enable */ +#define DBCR0_IA12X 0x00100000 /* Instr Addr 1-2 range eXclusive */ +#define DBCR0_IA3 0x00080000 /* Instr Addr compare 3 enable */ +#define DBCR0_IAC3 DBCR0_IA3 +#define DBCR0_IA4 0x00040000 /* Instr Addr compare 4 enable */ +#define DBCR0_IAC4 DBCR0_IA4 +#define DBCR0_IA34 0x00020000 /* Instr Addr 3-4 range Enable */ +#define DBCR0_IA34X 0x00010000 /* Instr Addr 3-4 range eXclusive */ +#define DBCR0_IA12T 0x00008000 /* Instr Addr 1-2 range Toggle */ +#define DBCR0_IA34T 0x00004000 /* Instr Addr 3-4 range Toggle */ +#define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */ +#elif defined(CONFIG_BOOKE) +#define DBCR0_EDM 0x80000000 /* External Debug Mode */ +#define DBCR0_IDM 0x40000000 /* Internal Debug Mode */ +#define DBCR0_RST 0x30000000 /* all the bits in the RST field */ +/* DBCR0_RST_* is 44x specific and not followed in fsl booke */ +#define DBCR0_RST_SYSTEM 0x30000000 /* System Reset */ +#define DBCR0_RST_CHIP 0x20000000 /* Chip Reset */ +#define DBCR0_RST_CORE 0x10000000 /* Core Reset */ +#define DBCR0_RST_NONE 0x00000000 /* No Reset */ +#define DBCR0_ICMP 0x08000000 /* Instruction Completion */ +#define DBCR0_IC DBCR0_ICMP +#define DBCR0_BRT 0x04000000 /* Branch Taken */ +#define DBCR0_BT DBCR0_BRT +#define DBCR0_IRPT 0x02000000 /* Exception Debug Event */ +#define DBCR0_TDE 0x01000000 /* TRAP Debug Event */ +#define DBCR0_TIE DBCR0_TDE +#define DBCR0_IAC1 0x00800000 /* Instr Addr compare 1 enable */ +#define DBCR0_IAC2 0x00400000 /* Instr Addr compare 2 enable */ +#define DBCR0_IAC3 0x00200000 /* Instr Addr compare 3 enable */ +#define DBCR0_IAC4 0x00100000 /* Instr Addr compare 4 enable */ +#define DBCR0_DAC1R 0x00080000 /* DAC 1 Read enable */ +#define DBCR0_DAC1W 0x00040000 /* DAC 1 Write enable */ +#define DBCR0_DAC2R 0x00020000 /* DAC 2 Read enable */ +#define DBCR0_DAC2W 0x00010000 /* DAC 2 Write enable */ +#define DBCR0_RET 0x00008000 /* Return Debug Event */ +#define DBCR0_CIRPT 0x00000040 /* Critical Interrupt Taken Event */ +#define DBCR0_CRET 0x00000020 /* Critical Return Debug Event */ +#define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */ + +/* Bit definitions related to the DBCR1. */ +#define DBCR1_IAC12M 0x00800000 /* Instr Addr 1-2 range enable */ +#define DBCR1_IAC12MX 0x00C00000 /* Instr Addr 1-2 range eXclusive */ +#define DBCR1_IAC12AT 0x00010000 /* Instr Addr 1-2 range Toggle */ +#define DBCR1_IAC34M 0x00000080 /* Instr Addr 3-4 range enable */ +#define DBCR1_IAC34MX 0x000000C0 /* Instr Addr 3-4 range eXclusive */ +#define DBCR1_IAC34AT 0x00000001 /* Instr Addr 3-4 range Toggle */ + +/* Bit definitions related to the DBCR2. */ +#define DBCR2_DAC12M 0x00800000 /* DAC 1-2 range enable */ +#define DBCR2_DAC12MX 0x00C00000 /* DAC 1-2 range eXclusive */ +#define DBCR2_DAC12A 0x00200000 /* DAC 1-2 Asynchronous */ +#endif + +/* Bit definitions related to the TCR. */ +#define TCR_WP(x) (((x)&0x3)<<30) /* WDT Period */ +#define TCR_WP_MASK TCR_WP(3) +#define WP_2_17 0 /* 2^17 clocks */ +#define WP_2_21 1 /* 2^21 clocks */ +#define WP_2_25 2 /* 2^25 clocks */ +#define WP_2_29 3 /* 2^29 clocks */ +#define TCR_WRC(x) (((x)&0x3)<<28) /* WDT Reset Control */ +#define TCR_WRC_MASK TCR_WRC(3) +#define WRC_NONE 0 /* No reset will occur */ +#define WRC_CORE 1 /* Core reset will occur */ +#define WRC_CHIP 2 /* Chip reset will occur */ +#define WRC_SYSTEM 3 /* System reset will occur */ +#define TCR_WIE 0x08000000 /* WDT Interrupt Enable */ +#define TCR_PIE 0x04000000 /* PIT Interrupt Enable */ +#define TCR_DIE TCR_PIE /* DEC Interrupt Enable */ +#define TCR_FP(x) (((x)&0x3)<<24) /* FIT Period */ +#define TCR_FP_MASK TCR_FP(3) +#define FP_2_9 0 /* 2^9 clocks */ +#define FP_2_13 1 /* 2^13 clocks */ +#define FP_2_17 2 /* 2^17 clocks */ +#define FP_2_21 3 /* 2^21 clocks */ +#define TCR_FIE 0x00800000 /* FIT Interrupt Enable */ +#define TCR_ARE 0x00400000 /* Auto Reload Enable */ + +/* Bit definitions for the TSR. */ +#define TSR_ENW 0x80000000 /* Enable Next Watchdog */ +#define TSR_WIS 0x40000000 /* WDT Interrupt Status */ +#define TSR_WRS(x) (((x)&0x3)<<28) /* WDT Reset Status */ +#define WRS_NONE 0 /* No WDT reset occurred */ +#define WRS_CORE 1 /* WDT forced core reset */ +#define WRS_CHIP 2 /* WDT forced chip reset */ +#define WRS_SYSTEM 3 /* WDT forced system reset */ +#define TSR_PIS 0x08000000 /* PIT Interrupt Status */ +#define TSR_DIS TSR_PIS /* DEC Interrupt Status */ +#define TSR_FIS 0x04000000 /* FIT Interrupt Status */ + +/* Bit definitions for the DCCR. */ +#define DCCR_NOCACHE 0 /* Noncacheable */ +#define DCCR_CACHE 1 /* Cacheable */ + +/* Bit definitions for DCWR. */ +#define DCWR_COPY 0 /* Copy-back */ +#define DCWR_WRITE 1 /* Write-through */ + +/* Bit definitions for ICCR. */ +#define ICCR_NOCACHE 0 /* Noncacheable */ +#define ICCR_CACHE 1 /* Cacheable */ + +/* Bit definitions for L1CSR0. */ +#define L1CSR0_CLFC 0x00000100 /* Cache Lock Bits Flash Clear */ +#define L1CSR0_DCFI 0x00000002 /* Data Cache Flash Invalidate */ +#define L1CSR0_CFI 0x00000002 /* Cache Flash Invalidate */ +#define L1CSR0_DCE 0x00000001 /* Data Cache Enable */ + +/* Bit definitions for L1CSR1. */ +#define L1CSR1_ICLFR 0x00000100 /* Instr Cache Lock Bits Flash Reset */ +#define L1CSR1_ICFI 0x00000002 /* Instr Cache Flash Invalidate */ +#define L1CSR1_ICE 0x00000001 /* Instr Cache Enable */ + +/* Bit definitions for L2CSR0. */ +#define L2CSR0_L2E 0x80000000 /* L2 Cache Enable */ +#define L2CSR0_L2PE 0x40000000 /* L2 Cache Parity/ECC Enable */ +#define L2CSR0_L2WP 0x1c000000 /* L2 I/D Way Partioning */ +#define L2CSR0_L2CM 0x03000000 /* L2 Cache Coherency Mode */ +#define L2CSR0_L2FI 0x00200000 /* L2 Cache Flash Invalidate */ +#define L2CSR0_L2IO 0x00100000 /* L2 Cache Instruction Only */ +#define L2CSR0_L2DO 0x00010000 /* L2 Cache Data Only */ +#define L2CSR0_L2REP 0x00003000 /* L2 Line Replacement Algo */ +#define L2CSR0_L2FL 0x00000800 /* L2 Cache Flush */ +#define L2CSR0_L2LFC 0x00000400 /* L2 Cache Lock Flash Clear */ +#define L2CSR0_L2LOA 0x00000080 /* L2 Cache Lock Overflow Allocate */ +#define L2CSR0_L2LO 0x00000020 /* L2 Cache Lock Overflow */ + +/* Bit definitions for SGR. */ +#define SGR_NORMAL 0 /* Speculative fetching allowed. */ +#define SGR_GUARDED 1 /* Speculative fetching disallowed. */ + +/* Bit definitions for SPEFSCR. */ +#define SPEFSCR_SOVH 0x80000000 /* Summary integer overflow high */ +#define SPEFSCR_OVH 0x40000000 /* Integer overflow high */ +#define SPEFSCR_FGH 0x20000000 /* Embedded FP guard bit high */ +#define SPEFSCR_FXH 0x10000000 /* Embedded FP sticky bit high */ +#define SPEFSCR_FINVH 0x08000000 /* Embedded FP invalid operation high */ +#define SPEFSCR_FDBZH 0x04000000 /* Embedded FP div by zero high */ +#define SPEFSCR_FUNFH 0x02000000 /* Embedded FP underflow high */ +#define SPEFSCR_FOVFH 0x01000000 /* Embedded FP overflow high */ +#define SPEFSCR_FINXS 0x00200000 /* Embedded FP inexact sticky */ +#define SPEFSCR_FINVS 0x00100000 /* Embedded FP invalid op. sticky */ +#define SPEFSCR_FDBZS 0x00080000 /* Embedded FP div by zero sticky */ +#define SPEFSCR_FUNFS 0x00040000 /* Embedded FP underflow sticky */ +#define SPEFSCR_FOVFS 0x00020000 /* Embedded FP overflow sticky */ +#define SPEFSCR_MODE 0x00010000 /* Embedded FP mode */ +#define SPEFSCR_SOV 0x00008000 /* Integer summary overflow */ +#define SPEFSCR_OV 0x00004000 /* Integer overflow */ +#define SPEFSCR_FG 0x00002000 /* Embedded FP guard bit */ +#define SPEFSCR_FX 0x00001000 /* Embedded FP sticky bit */ +#define SPEFSCR_FINV 0x00000800 /* Embedded FP invalid operation */ +#define SPEFSCR_FDBZ 0x00000400 /* Embedded FP div by zero */ +#define SPEFSCR_FUNF 0x00000200 /* Embedded FP underflow */ +#define SPEFSCR_FOVF 0x00000100 /* Embedded FP overflow */ +#define SPEFSCR_FINXE 0x00000040 /* Embedded FP inexact enable */ +#define SPEFSCR_FINVE 0x00000020 /* Embedded FP invalid op. enable */ +#define SPEFSCR_FDBZE 0x00000010 /* Embedded FP div by zero enable */ +#define SPEFSCR_FUNFE 0x00000008 /* Embedded FP underflow enable */ +#define SPEFSCR_FOVFE 0x00000004 /* Embedded FP overflow enable */ +#define SPEFSCR_FRMC 0x00000003 /* Embedded FP rounding mode control */ + +/* + * The IBM-403 is an even more odd special case, as it is much + * older than the IBM-405 series. We put these down here incase someone + * wishes to support these machines again. + */ +#ifdef CONFIG_403GCX +/* Special Purpose Registers (SPRNs)*/ +#define SPRN_TBHU 0x3CC /* Time Base High User-mode */ +#define SPRN_TBLU 0x3CD /* Time Base Low User-mode */ +#define SPRN_CDBCR 0x3D7 /* Cache Debug Control Register */ +#define SPRN_TBHI 0x3DC /* Time Base High */ +#define SPRN_TBLO 0x3DD /* Time Base Low */ +#define SPRN_DBCR 0x3F2 /* Debug Control Regsiter */ +#define SPRN_PBL1 0x3FC /* Protection Bound Lower 1 */ +#define SPRN_PBL2 0x3FE /* Protection Bound Lower 2 */ +#define SPRN_PBU1 0x3FD /* Protection Bound Upper 1 */ +#define SPRN_PBU2 0x3FF /* Protection Bound Upper 2 */ + + +/* Bit definitions for the DBCR. */ +#define DBCR_EDM DBCR0_EDM +#define DBCR_IDM DBCR0_IDM +#define DBCR_RST(x) (((x) & 0x3) << 28) +#define DBCR_RST_NONE 0 +#define DBCR_RST_CORE 1 +#define DBCR_RST_CHIP 2 +#define DBCR_RST_SYSTEM 3 +#define DBCR_IC DBCR0_IC /* Instruction Completion Debug Evnt */ +#define DBCR_BT DBCR0_BT /* Branch Taken Debug Event */ +#define DBCR_EDE DBCR0_EDE /* Exception Debug Event */ +#define DBCR_TDE DBCR0_TDE /* TRAP Debug Event */ +#define DBCR_FER 0x00F80000 /* First Events Remaining Mask */ +#define DBCR_FT 0x00040000 /* Freeze Timers on Debug Event */ +#define DBCR_IA1 0x00020000 /* Instr. Addr. Compare 1 Enable */ +#define DBCR_IA2 0x00010000 /* Instr. Addr. Compare 2 Enable */ +#define DBCR_D1R 0x00008000 /* Data Addr. Compare 1 Read Enable */ +#define DBCR_D1W 0x00004000 /* Data Addr. Compare 1 Write Enable */ +#define DBCR_D1S(x) (((x) & 0x3) << 12) /* Data Adrr. Compare 1 Size */ +#define DAC_BYTE 0 +#define DAC_HALF 1 +#define DAC_WORD 2 +#define DAC_QUAD 3 +#define DBCR_D2R 0x00000800 /* Data Addr. Compare 2 Read Enable */ +#define DBCR_D2W 0x00000400 /* Data Addr. Compare 2 Write Enable */ +#define DBCR_D2S(x) (((x) & 0x3) << 8) /* Data Addr. Compare 2 Size */ +#define DBCR_SBT 0x00000040 /* Second Branch Taken Debug Event */ +#define DBCR_SED 0x00000020 /* Second Exception Debug Event */ +#define DBCR_STD 0x00000010 /* Second Trap Debug Event */ +#define DBCR_SIA 0x00000008 /* Second IAC Enable */ +#define DBCR_SDA 0x00000004 /* Second DAC Enable */ +#define DBCR_JOI 0x00000002 /* JTAG Serial Outbound Int. Enable */ +#define DBCR_JII 0x00000001 /* JTAG Serial Inbound Int. Enable */ +#endif /* 403GCX */ +#endif /* __ASM_POWERPC_REG_BOOKE_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/reg_fsl_emb.h b/arch/powerpc/include/asm/reg_fsl_emb.h new file mode 100644 index 00000000000..1e180a59458 --- /dev/null +++ b/arch/powerpc/include/asm/reg_fsl_emb.h @@ -0,0 +1,72 @@ +/* + * Contains register definitions for the Freescale Embedded Performance + * Monitor. + */ +#ifdef __KERNEL__ +#ifndef __ASM_POWERPC_REG_FSL_EMB_H__ +#define __ASM_POWERPC_REG_FSL_EMB_H__ + +#ifndef __ASSEMBLY__ +/* Performance Monitor Registers */ +#define mfpmr(rn) ({unsigned int rval; \ + asm volatile("mfpmr %0," __stringify(rn) \ + : "=r" (rval)); rval;}) +#define mtpmr(rn, v) asm volatile("mtpmr " __stringify(rn) ",%0" : : "r" (v)) +#endif /* __ASSEMBLY__ */ + +/* Freescale Book E Performance Monitor APU Registers */ +#define PMRN_PMC0 0x010 /* Performance Monitor Counter 0 */ +#define PMRN_PMC1 0x011 /* Performance Monitor Counter 1 */ +#define PMRN_PMC2 0x012 /* Performance Monitor Counter 1 */ +#define PMRN_PMC3 0x013 /* Performance Monitor Counter 1 */ +#define PMRN_PMLCA0 0x090 /* PM Local Control A0 */ +#define PMRN_PMLCA1 0x091 /* PM Local Control A1 */ +#define PMRN_PMLCA2 0x092 /* PM Local Control A2 */ +#define PMRN_PMLCA3 0x093 /* PM Local Control A3 */ + +#define PMLCA_FC 0x80000000 /* Freeze Counter */ +#define PMLCA_FCS 0x40000000 /* Freeze in Supervisor */ +#define PMLCA_FCU 0x20000000 /* Freeze in User */ +#define PMLCA_FCM1 0x10000000 /* Freeze when PMM==1 */ +#define PMLCA_FCM0 0x08000000 /* Freeze when PMM==0 */ +#define PMLCA_CE 0x04000000 /* Condition Enable */ + +#define PMLCA_EVENT_MASK 0x007f0000 /* Event field */ +#define PMLCA_EVENT_SHIFT 16 + +#define PMRN_PMLCB0 0x110 /* PM Local Control B0 */ +#define PMRN_PMLCB1 0x111 /* PM Local Control B1 */ +#define PMRN_PMLCB2 0x112 /* PM Local Control B2 */ +#define PMRN_PMLCB3 0x113 /* PM Local Control B3 */ + +#define PMLCB_THRESHMUL_MASK 0x0700 /* Threshhold Multiple Field */ +#define PMLCB_THRESHMUL_SHIFT 8 + +#define PMLCB_THRESHOLD_MASK 0x003f /* Threshold Field */ +#define PMLCB_THRESHOLD_SHIFT 0 + +#define PMRN_PMGC0 0x190 /* PM Global Control 0 */ + +#define PMGC0_FAC 0x80000000 /* Freeze all Counters */ +#define PMGC0_PMIE 0x40000000 /* Interrupt Enable */ +#define PMGC0_FCECE 0x20000000 /* Freeze countes on + Enabled Condition or + Event */ + +#define PMRN_UPMC0 0x000 /* User Performance Monitor Counter 0 */ +#define PMRN_UPMC1 0x001 /* User Performance Monitor Counter 1 */ +#define PMRN_UPMC2 0x002 /* User Performance Monitor Counter 1 */ +#define PMRN_UPMC3 0x003 /* User Performance Monitor Counter 1 */ +#define PMRN_UPMLCA0 0x080 /* User PM Local Control A0 */ +#define PMRN_UPMLCA1 0x081 /* User PM Local Control A1 */ +#define PMRN_UPMLCA2 0x082 /* User PM Local Control A2 */ +#define PMRN_UPMLCA3 0x083 /* User PM Local Control A3 */ +#define PMRN_UPMLCB0 0x100 /* User PM Local Control B0 */ +#define PMRN_UPMLCB1 0x101 /* User PM Local Control B1 */ +#define PMRN_UPMLCB2 0x102 /* User PM Local Control B2 */ +#define PMRN_UPMLCB3 0x103 /* User PM Local Control B3 */ +#define PMRN_UPMGC0 0x180 /* User PM Global Control 0 */ + + +#endif /* __ASM_POWERPC_REG_FSL_EMB_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/resource.h b/arch/powerpc/include/asm/resource.h new file mode 100644 index 00000000000..04bc4db8921 --- /dev/null +++ b/arch/powerpc/include/asm/resource.h @@ -0,0 +1 @@ +#include diff --git a/arch/powerpc/include/asm/rheap.h b/arch/powerpc/include/asm/rheap.h new file mode 100644 index 00000000000..172381769cf --- /dev/null +++ b/arch/powerpc/include/asm/rheap.h @@ -0,0 +1,89 @@ +/* + * include/asm-ppc/rheap.h + * + * Header file for the implementation of a remote heap. + * + * Author: Pantelis Antoniou + * + * 2004 (c) INTRACOM S.A. Greece. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#ifndef __ASM_PPC_RHEAP_H__ +#define __ASM_PPC_RHEAP_H__ + +#include + +typedef struct _rh_block { + struct list_head list; + unsigned long start; + int size; + const char *owner; +} rh_block_t; + +typedef struct _rh_info { + unsigned int alignment; + int max_blocks; + int empty_slots; + rh_block_t *block; + struct list_head empty_list; + struct list_head free_list; + struct list_head taken_list; + unsigned int flags; +} rh_info_t; + +#define RHIF_STATIC_INFO 0x1 +#define RHIF_STATIC_BLOCK 0x2 + +typedef struct _rh_stats { + unsigned long start; + int size; + const char *owner; +} rh_stats_t; + +#define RHGS_FREE 0 +#define RHGS_TAKEN 1 + +/* Create a remote heap dynamically */ +extern rh_info_t *rh_create(unsigned int alignment); + +/* Destroy a remote heap, created by rh_create() */ +extern void rh_destroy(rh_info_t * info); + +/* Initialize in place a remote info block */ +extern void rh_init(rh_info_t * info, unsigned int alignment, int max_blocks, + rh_block_t * block); + +/* Attach a free region to manage */ +extern int rh_attach_region(rh_info_t * info, unsigned long start, int size); + +/* Detach a free region */ +extern unsigned long rh_detach_region(rh_info_t * info, unsigned long start, int size); + +/* Allocate the given size from the remote heap (with alignment) */ +extern unsigned long rh_alloc_align(rh_info_t * info, int size, int alignment, + const char *owner); + +/* Allocate the given size from the remote heap */ +extern unsigned long rh_alloc(rh_info_t * info, int size, const char *owner); + +/* Allocate the given size from the given address */ +extern unsigned long rh_alloc_fixed(rh_info_t * info, unsigned long start, int size, + const char *owner); + +/* Free the allocated area */ +extern int rh_free(rh_info_t * info, unsigned long start); + +/* Get stats for debugging purposes */ +extern int rh_get_stats(rh_info_t * info, int what, int max_stats, + rh_stats_t * stats); + +/* Simple dump of remote heap info */ +extern void rh_dump(rh_info_t * info); + +/* Set owner of taken block */ +extern int rh_set_owner(rh_info_t * info, unsigned long start, const char *owner); + +#endif /* __ASM_PPC_RHEAP_H__ */ diff --git a/arch/powerpc/include/asm/rio.h b/arch/powerpc/include/asm/rio.h new file mode 100644 index 00000000000..0018bf80cb2 --- /dev/null +++ b/arch/powerpc/include/asm/rio.h @@ -0,0 +1,18 @@ +/* + * RapidIO architecture support + * + * Copyright 2005 MontaVista Software, Inc. + * Matt Porter + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef ASM_PPC_RIO_H +#define ASM_PPC_RIO_H + +extern void platform_rio_init(void); + +#endif /* ASM_PPC_RIO_H */ diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h new file mode 100644 index 00000000000..8eaa7b28d9d --- /dev/null +++ b/arch/powerpc/include/asm/rtas.h @@ -0,0 +1,247 @@ +#ifndef _POWERPC_RTAS_H +#define _POWERPC_RTAS_H +#ifdef __KERNEL__ + +#include +#include + +/* + * Definitions for talking to the RTAS on CHRP machines. + * + * Copyright (C) 2001 Peter Bergner + * Copyright (C) 2001 PPC 64 Team, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#define RTAS_UNKNOWN_SERVICE (-1) +#define RTAS_INSTANTIATE_MAX (1UL<<30) /* Don't instantiate rtas at/above this value */ + +/* Buffer size for ppc_rtas system call. */ +#define RTAS_RMOBUF_MAX (64 * 1024) + +/* RTAS return status codes */ +#define RTAS_NOT_SUSPENDABLE -9004 +#define RTAS_BUSY -2 /* RTAS Busy */ +#define RTAS_EXTENDED_DELAY_MIN 9900 +#define RTAS_EXTENDED_DELAY_MAX 9905 + +/* + * In general to call RTAS use rtas_token("string") to lookup + * an RTAS token for the given string (e.g. "event-scan"). + * To actually perform the call use + * ret = rtas_call(token, n_in, n_out, ...) + * Where n_in is the number of input parameters and + * n_out is the number of output parameters + * + * If the "string" is invalid on this system, RTAS_UNKNOWN_SERVICE + * will be returned as a token. rtas_call() does look for this + * token and error out gracefully so rtas_call(rtas_token("str"), ...) + * may be safely used for one-shot calls to RTAS. + * + */ + +typedef u32 rtas_arg_t; + +struct rtas_args { + u32 token; + u32 nargs; + u32 nret; + rtas_arg_t args[16]; + rtas_arg_t *rets; /* Pointer to return values in args[]. */ +}; + +struct rtas_t { + unsigned long entry; /* physical address pointer */ + unsigned long base; /* physical address pointer */ + unsigned long size; + spinlock_t lock; + struct rtas_args args; + struct device_node *dev; /* virtual address pointer */ +}; + +/* RTAS event classes */ +#define RTAS_INTERNAL_ERROR 0x80000000 /* set bit 0 */ +#define RTAS_EPOW_WARNING 0x40000000 /* set bit 1 */ +#define RTAS_POWERMGM_EVENTS 0x20000000 /* set bit 2 */ +#define RTAS_HOTPLUG_EVENTS 0x10000000 /* set bit 3 */ +#define RTAS_EVENT_SCAN_ALL_EVENTS 0xf0000000 + +/* RTAS event severity */ +#define RTAS_SEVERITY_FATAL 0x5 +#define RTAS_SEVERITY_ERROR 0x4 +#define RTAS_SEVERITY_ERROR_SYNC 0x3 +#define RTAS_SEVERITY_WARNING 0x2 +#define RTAS_SEVERITY_EVENT 0x1 +#define RTAS_SEVERITY_NO_ERROR 0x0 + +/* RTAS event disposition */ +#define RTAS_DISP_FULLY_RECOVERED 0x0 +#define RTAS_DISP_LIMITED_RECOVERY 0x1 +#define RTAS_DISP_NOT_RECOVERED 0x2 + +/* RTAS event initiator */ +#define RTAS_INITIATOR_UNKNOWN 0x0 +#define RTAS_INITIATOR_CPU 0x1 +#define RTAS_INITIATOR_PCI 0x2 +#define RTAS_INITIATOR_ISA 0x3 +#define RTAS_INITIATOR_MEMORY 0x4 +#define RTAS_INITIATOR_POWERMGM 0x5 + +/* RTAS event target */ +#define RTAS_TARGET_UNKNOWN 0x0 +#define RTAS_TARGET_CPU 0x1 +#define RTAS_TARGET_PCI 0x2 +#define RTAS_TARGET_ISA 0x3 +#define RTAS_TARGET_MEMORY 0x4 +#define RTAS_TARGET_POWERMGM 0x5 + +/* RTAS event type */ +#define RTAS_TYPE_RETRY 0x01 +#define RTAS_TYPE_TCE_ERR 0x02 +#define RTAS_TYPE_INTERN_DEV_FAIL 0x03 +#define RTAS_TYPE_TIMEOUT 0x04 +#define RTAS_TYPE_DATA_PARITY 0x05 +#define RTAS_TYPE_ADDR_PARITY 0x06 +#define RTAS_TYPE_CACHE_PARITY 0x07 +#define RTAS_TYPE_ADDR_INVALID 0x08 +#define RTAS_TYPE_ECC_UNCORR 0x09 +#define RTAS_TYPE_ECC_CORR 0x0a +#define RTAS_TYPE_EPOW 0x40 +#define RTAS_TYPE_PLATFORM 0xE0 +#define RTAS_TYPE_IO 0xE1 +#define RTAS_TYPE_INFO 0xE2 +#define RTAS_TYPE_DEALLOC 0xE3 +#define RTAS_TYPE_DUMP 0xE4 +/* I don't add PowerMGM events right now, this is a different topic */ +#define RTAS_TYPE_PMGM_POWER_SW_ON 0x60 +#define RTAS_TYPE_PMGM_POWER_SW_OFF 0x61 +#define RTAS_TYPE_PMGM_LID_OPEN 0x62 +#define RTAS_TYPE_PMGM_LID_CLOSE 0x63 +#define RTAS_TYPE_PMGM_SLEEP_BTN 0x64 +#define RTAS_TYPE_PMGM_WAKE_BTN 0x65 +#define RTAS_TYPE_PMGM_BATTERY_WARN 0x66 +#define RTAS_TYPE_PMGM_BATTERY_CRIT 0x67 +#define RTAS_TYPE_PMGM_SWITCH_TO_BAT 0x68 +#define RTAS_TYPE_PMGM_SWITCH_TO_AC 0x69 +#define RTAS_TYPE_PMGM_KBD_OR_MOUSE 0x6a +#define RTAS_TYPE_PMGM_ENCLOS_OPEN 0x6b +#define RTAS_TYPE_PMGM_ENCLOS_CLOSED 0x6c +#define RTAS_TYPE_PMGM_RING_INDICATE 0x6d +#define RTAS_TYPE_PMGM_LAN_ATTENTION 0x6e +#define RTAS_TYPE_PMGM_TIME_ALARM 0x6f +#define RTAS_TYPE_PMGM_CONFIG_CHANGE 0x70 +#define RTAS_TYPE_PMGM_SERVICE_PROC 0x71 + +struct rtas_error_log { + unsigned long version:8; /* Architectural version */ + unsigned long severity:3; /* Severity level of error */ + unsigned long disposition:2; /* Degree of recovery */ + unsigned long extended:1; /* extended log present? */ + unsigned long /* reserved */ :2; /* Reserved for future use */ + unsigned long initiator:4; /* Initiator of event */ + unsigned long target:4; /* Target of failed operation */ + unsigned long type:8; /* General event or error*/ + unsigned long extended_log_length:32; /* length in bytes */ + unsigned char buffer[1]; +}; + +/* + * This can be set by the rtas_flash module so that it can get called + * as the absolutely last thing before the kernel terminates. + */ +extern void (*rtas_flash_term_hook)(int); + +extern struct rtas_t rtas; + +extern void enter_rtas(unsigned long); +extern int rtas_token(const char *service); +extern int rtas_service_present(const char *service); +extern int rtas_call(int token, int, int, int *, ...); +extern void rtas_restart(char *cmd); +extern void rtas_power_off(void); +extern void rtas_halt(void); +extern void rtas_os_term(char *str); +extern int rtas_get_sensor(int sensor, int index, int *state); +extern int rtas_get_power_level(int powerdomain, int *level); +extern int rtas_set_power_level(int powerdomain, int level, int *setlevel); +extern int rtas_set_indicator(int indicator, int index, int new_value); +extern int rtas_set_indicator_fast(int indicator, int index, int new_value); +extern void rtas_progress(char *s, unsigned short hex); +extern void rtas_initialize(void); + +struct rtc_time; +extern unsigned long rtas_get_boot_time(void); +extern void rtas_get_rtc_time(struct rtc_time *rtc_time); +extern int rtas_set_rtc_time(struct rtc_time *rtc_time); + +extern unsigned int rtas_busy_delay_time(int status); +extern unsigned int rtas_busy_delay(int status); + +extern int early_init_dt_scan_rtas(unsigned long node, + const char *uname, int depth, void *data); + +extern void pSeries_log_error(char *buf, unsigned int err_type, int fatal); + +/* Error types logged. */ +#define ERR_FLAG_ALREADY_LOGGED 0x0 +#define ERR_FLAG_BOOT 0x1 /* log was pulled from NVRAM on boot */ +#define ERR_TYPE_RTAS_LOG 0x2 /* from rtas event-scan */ +#define ERR_TYPE_KERNEL_PANIC 0x4 /* from panic() */ + +/* All the types and not flags */ +#define ERR_TYPE_MASK (ERR_TYPE_RTAS_LOG | ERR_TYPE_KERNEL_PANIC) + +#define RTAS_DEBUG KERN_DEBUG "RTAS: " + +#define RTAS_ERROR_LOG_MAX 2048 + +/* + * Return the firmware-specified size of the error log buffer + * for all rtas calls that require an error buffer argument. + * This includes 'check-exception' and 'rtas-last-error'. + */ +extern int rtas_get_error_log_max(void); + +/* Event Scan Parameters */ +#define EVENT_SCAN_ALL_EVENTS 0xf0000000 +#define SURVEILLANCE_TOKEN 9000 +#define LOG_NUMBER 64 /* must be a power of two */ +#define LOG_NUMBER_MASK (LOG_NUMBER-1) + +/* Some RTAS ops require a data buffer and that buffer must be < 4G. + * Rather than having a memory allocator, just use this buffer + * (get the lock first), make the RTAS call. Copy the data instead + * of holding the buffer for long. + */ + +#define RTAS_DATA_BUF_SIZE 4096 +extern spinlock_t rtas_data_buf_lock; +extern char rtas_data_buf[RTAS_DATA_BUF_SIZE]; + +/* RMO buffer reserved for user-space RTAS use */ +extern unsigned long rtas_rmo_buf; + +#define GLOBAL_INTERRUPT_QUEUE 9005 + +/** + * rtas_config_addr - Format a busno, devfn and reg for RTAS. + * @busno: The bus number. + * @devfn: The device and function number as encoded by PCI_DEVFN(). + * @reg: The register number. + * + * This function encodes the given busno, devfn and register number as + * required for RTAS calls that take a "config_addr" parameter. + * See PAPR requirement 7.3.4-1 for more info. + */ +static inline u32 rtas_config_addr(int busno, int devfn, int reg) +{ + return ((reg & 0xf00) << 20) | ((busno & 0xff) << 16) | + (devfn << 8) | (reg & 0xff); +} + +#endif /* __KERNEL__ */ +#endif /* _POWERPC_RTAS_H */ diff --git a/arch/powerpc/include/asm/rtc.h b/arch/powerpc/include/asm/rtc.h new file mode 100644 index 00000000000..f5802926b6c --- /dev/null +++ b/arch/powerpc/include/asm/rtc.h @@ -0,0 +1,78 @@ +/* + * Real-time clock definitions and interfaces + * + * Author: Tom Rini + * + * 2002 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Based on: + * include/asm-m68k/rtc.h + * + * Copyright Richard Zidlicky + * implementation details for genrtc/q40rtc driver + * + * And the old drivers/macintosh/rtc.c which was heavily based on: + * Linux/SPARC Real Time Clock Driver + * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu) + * + * With additional work by Paul Mackerras and Franz Sirl. + */ + +#ifndef __ASM_POWERPC_RTC_H__ +#define __ASM_POWERPC_RTC_H__ + +#ifdef __KERNEL__ + +#include + +#include +#include + +#define RTC_PIE 0x40 /* periodic interrupt enable */ +#define RTC_AIE 0x20 /* alarm interrupt enable */ +#define RTC_UIE 0x10 /* update-finished interrupt enable */ + +/* some dummy definitions */ +#define RTC_BATT_BAD 0x100 /* battery bad */ +#define RTC_SQWE 0x08 /* enable square-wave output */ +#define RTC_DM_BINARY 0x04 /* all time/date values are BCD if clear */ +#define RTC_24H 0x02 /* 24 hour mode - else hours bit 7 means pm */ +#define RTC_DST_EN 0x01 /* auto switch DST - works f. USA only */ + +static inline unsigned int get_rtc_time(struct rtc_time *time) +{ + if (ppc_md.get_rtc_time) + ppc_md.get_rtc_time(time); + return RTC_24H; +} + +/* Set the current date and time in the real time clock. */ +static inline int set_rtc_time(struct rtc_time *time) +{ + if (ppc_md.set_rtc_time) + return ppc_md.set_rtc_time(time); + return -EINVAL; +} + +static inline unsigned int get_rtc_ss(void) +{ + struct rtc_time h; + + get_rtc_time(&h); + return h.tm_sec; +} + +static inline int get_rtc_pll(struct rtc_pll_info *pll) +{ + return -EINVAL; +} +static inline int set_rtc_pll(struct rtc_pll_info *pll) +{ + return -EINVAL; +} + +#endif /* __KERNEL__ */ +#endif /* __ASM_POWERPC_RTC_H__ */ diff --git a/arch/powerpc/include/asm/rwsem.h b/arch/powerpc/include/asm/rwsem.h new file mode 100644 index 00000000000..24cd9281ec3 --- /dev/null +++ b/arch/powerpc/include/asm/rwsem.h @@ -0,0 +1,173 @@ +#ifndef _ASM_POWERPC_RWSEM_H +#define _ASM_POWERPC_RWSEM_H + +#ifndef _LINUX_RWSEM_H +#error "Please don't include directly, use instead." +#endif + +#ifdef __KERNEL__ + +/* + * R/W semaphores for PPC using the stuff in lib/rwsem.c. + * Adapted largely from include/asm-i386/rwsem.h + * by Paul Mackerras . + */ + +#include +#include +#include +#include + +/* + * the semaphore definition + */ +struct rw_semaphore { + /* XXX this should be able to be an atomic_t -- paulus */ + signed int count; +#define RWSEM_UNLOCKED_VALUE 0x00000000 +#define RWSEM_ACTIVE_BIAS 0x00000001 +#define RWSEM_ACTIVE_MASK 0x0000ffff +#define RWSEM_WAITING_BIAS (-0x00010000) +#define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS +#define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) + spinlock_t wait_lock; + struct list_head wait_list; +#ifdef CONFIG_DEBUG_LOCK_ALLOC + struct lockdep_map dep_map; +#endif +}; + +#ifdef CONFIG_DEBUG_LOCK_ALLOC +# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname } +#else +# define __RWSEM_DEP_MAP_INIT(lockname) +#endif + +#define __RWSEM_INITIALIZER(name) \ + { RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \ + LIST_HEAD_INIT((name).wait_list) __RWSEM_DEP_MAP_INIT(name) } + +#define DECLARE_RWSEM(name) \ + struct rw_semaphore name = __RWSEM_INITIALIZER(name) + +extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem); +extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem); +extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem); +extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem); + +extern void __init_rwsem(struct rw_semaphore *sem, const char *name, + struct lock_class_key *key); + +#define init_rwsem(sem) \ + do { \ + static struct lock_class_key __key; \ + \ + __init_rwsem((sem), #sem, &__key); \ + } while (0) + +/* + * lock for reading + */ +static inline void __down_read(struct rw_semaphore *sem) +{ + if (unlikely(atomic_inc_return((atomic_t *)(&sem->count)) <= 0)) + rwsem_down_read_failed(sem); +} + +static inline int __down_read_trylock(struct rw_semaphore *sem) +{ + int tmp; + + while ((tmp = sem->count) >= 0) { + if (tmp == cmpxchg(&sem->count, tmp, + tmp + RWSEM_ACTIVE_READ_BIAS)) { + return 1; + } + } + return 0; +} + +/* + * lock for writing + */ +static inline void __down_write_nested(struct rw_semaphore *sem, int subclass) +{ + int tmp; + + tmp = atomic_add_return(RWSEM_ACTIVE_WRITE_BIAS, + (atomic_t *)(&sem->count)); + if (unlikely(tmp != RWSEM_ACTIVE_WRITE_BIAS)) + rwsem_down_write_failed(sem); +} + +static inline void __down_write(struct rw_semaphore *sem) +{ + __down_write_nested(sem, 0); +} + +static inline int __down_write_trylock(struct rw_semaphore *sem) +{ + int tmp; + + tmp = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE, + RWSEM_ACTIVE_WRITE_BIAS); + return tmp == RWSEM_UNLOCKED_VALUE; +} + +/* + * unlock after reading + */ +static inline void __up_read(struct rw_semaphore *sem) +{ + int tmp; + + tmp = atomic_dec_return((atomic_t *)(&sem->count)); + if (unlikely(tmp < -1 && (tmp & RWSEM_ACTIVE_MASK) == 0)) + rwsem_wake(sem); +} + +/* + * unlock after writing + */ +static inline void __up_write(struct rw_semaphore *sem) +{ + if (unlikely(atomic_sub_return(RWSEM_ACTIVE_WRITE_BIAS, + (atomic_t *)(&sem->count)) < 0)) + rwsem_wake(sem); +} + +/* + * implement atomic add functionality + */ +static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem) +{ + atomic_add(delta, (atomic_t *)(&sem->count)); +} + +/* + * downgrade write lock to read lock + */ +static inline void __downgrade_write(struct rw_semaphore *sem) +{ + int tmp; + + tmp = atomic_add_return(-RWSEM_WAITING_BIAS, (atomic_t *)(&sem->count)); + if (tmp < 0) + rwsem_downgrade_wake(sem); +} + +/* + * implement exchange and add functionality + */ +static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem) +{ + return atomic_add_return(delta, (atomic_t *)(&sem->count)); +} + +static inline int rwsem_is_locked(struct rw_semaphore *sem) +{ + return (sem->count != 0); +} + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_RWSEM_H */ diff --git a/arch/powerpc/include/asm/scatterlist.h b/arch/powerpc/include/asm/scatterlist.h new file mode 100644 index 00000000000..fcf7d55afe4 --- /dev/null +++ b/arch/powerpc/include/asm/scatterlist.h @@ -0,0 +1,50 @@ +#ifndef _ASM_POWERPC_SCATTERLIST_H +#define _ASM_POWERPC_SCATTERLIST_H +/* + * Copyright (C) 2001 PPC64 Team, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifdef __KERNEL__ +#include +#include + +struct scatterlist { +#ifdef CONFIG_DEBUG_SG + unsigned long sg_magic; +#endif + unsigned long page_link; + unsigned int offset; + unsigned int length; + + /* For TCE support */ + dma_addr_t dma_address; + u32 dma_length; +}; + +/* + * These macros should be used after a dma_map_sg call has been done + * to get bus addresses of each of the SG entries and their lengths. + * You should only work with the number of sg entries pci_map_sg + * returns, or alternatively stop on the first sg_dma_len(sg) which + * is 0. + */ +#define sg_dma_address(sg) ((sg)->dma_address) +#ifdef __powerpc64__ +#define sg_dma_len(sg) ((sg)->dma_length) +#else +#define sg_dma_len(sg) ((sg)->length) +#endif + +#ifdef __powerpc64__ +#define ISA_DMA_THRESHOLD (~0UL) +#endif + +#define ARCH_HAS_SG_CHAIN + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_SCATTERLIST_H */ diff --git a/arch/powerpc/include/asm/seccomp.h b/arch/powerpc/include/asm/seccomp.h new file mode 100644 index 00000000000..853765eb1f6 --- /dev/null +++ b/arch/powerpc/include/asm/seccomp.h @@ -0,0 +1,20 @@ +#ifndef _ASM_POWERPC_SECCOMP_H +#define _ASM_POWERPC_SECCOMP_H + +#ifdef __KERNEL__ +#include +#endif + +#include + +#define __NR_seccomp_read __NR_read +#define __NR_seccomp_write __NR_write +#define __NR_seccomp_exit __NR_exit +#define __NR_seccomp_sigreturn __NR_rt_sigreturn + +#define __NR_seccomp_read_32 __NR_read +#define __NR_seccomp_write_32 __NR_write +#define __NR_seccomp_exit_32 __NR_exit +#define __NR_seccomp_sigreturn_32 __NR_sigreturn + +#endif /* _ASM_POWERPC_SECCOMP_H */ diff --git a/arch/powerpc/include/asm/sections.h b/arch/powerpc/include/asm/sections.h new file mode 100644 index 00000000000..916018e425c --- /dev/null +++ b/arch/powerpc/include/asm/sections.h @@ -0,0 +1,22 @@ +#ifndef _ASM_POWERPC_SECTIONS_H +#define _ASM_POWERPC_SECTIONS_H +#ifdef __KERNEL__ + +#include + +#ifdef __powerpc64__ + +extern char _end[]; + +static inline int in_kernel_text(unsigned long addr) +{ + if (addr >= (unsigned long)_stext && addr < (unsigned long)__init_end) + return 1; + + return 0; +} + +#endif + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_SECTIONS_H */ diff --git a/arch/powerpc/include/asm/sembuf.h b/arch/powerpc/include/asm/sembuf.h new file mode 100644 index 00000000000..99a41938ae3 --- /dev/null +++ b/arch/powerpc/include/asm/sembuf.h @@ -0,0 +1,36 @@ +#ifndef _ASM_POWERPC_SEMBUF_H +#define _ASM_POWERPC_SEMBUF_H + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/* + * The semid64_ds structure for PPC architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct semid64_ds { + struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ +#ifndef __powerpc64__ + unsigned long __unused1; +#endif + __kernel_time_t sem_otime; /* last semop time */ +#ifndef __powerpc64__ + unsigned long __unused2; +#endif + __kernel_time_t sem_ctime; /* last change time */ + unsigned long sem_nsems; /* no. of semaphores in array */ + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _ASM_POWERPC_SEMBUF_H */ diff --git a/arch/powerpc/include/asm/serial.h b/arch/powerpc/include/asm/serial.h new file mode 100644 index 00000000000..3e8589b43cb --- /dev/null +++ b/arch/powerpc/include/asm/serial.h @@ -0,0 +1,24 @@ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_POWERPC_SERIAL_H +#define _ASM_POWERPC_SERIAL_H + +/* + * Serial ports are not listed here, because they are discovered + * through the device tree. + */ + +/* Default baud base if not found in device-tree */ +#define BASE_BAUD ( 1843200 / 16 ) + +#ifdef CONFIG_PPC_UDBG_16550 +extern void find_legacy_serial_ports(void); +#else +#define find_legacy_serial_ports() do { } while (0) +#endif + +#endif /* _PPC64_SERIAL_H */ diff --git a/arch/powerpc/include/asm/setjmp.h b/arch/powerpc/include/asm/setjmp.h new file mode 100644 index 00000000000..279d03a1eec --- /dev/null +++ b/arch/powerpc/include/asm/setjmp.h @@ -0,0 +1,18 @@ +/* + * Copyright © 2008 Michael Neuling IBM Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ +#ifndef _ASM_POWERPC_SETJMP_H +#define _ASM_POWERPC_SETJMP_H + +#define JMP_BUF_LEN 23 + +extern long setjmp(long *); +extern void longjmp(long *, long); + +#endif /* _ASM_POWERPC_SETJMP_H */ diff --git a/arch/powerpc/include/asm/setup.h b/arch/powerpc/include/asm/setup.h new file mode 100644 index 00000000000..817fac0a071 --- /dev/null +++ b/arch/powerpc/include/asm/setup.h @@ -0,0 +1,6 @@ +#ifndef _ASM_POWERPC_SETUP_H +#define _ASM_POWERPC_SETUP_H + +#define COMMAND_LINE_SIZE 512 + +#endif /* _ASM_POWERPC_SETUP_H */ diff --git a/arch/powerpc/include/asm/shmbuf.h b/arch/powerpc/include/asm/shmbuf.h new file mode 100644 index 00000000000..8efa39698b6 --- /dev/null +++ b/arch/powerpc/include/asm/shmbuf.h @@ -0,0 +1,59 @@ +#ifndef _ASM_POWERPC_SHMBUF_H +#define _ASM_POWERPC_SHMBUF_H + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/* + * The shmid64_ds structure for PPC architecture. + * + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct shmid64_ds { + struct ipc64_perm shm_perm; /* operation perms */ +#ifndef __powerpc64__ + unsigned long __unused1; +#endif + __kernel_time_t shm_atime; /* last attach time */ +#ifndef __powerpc64__ + unsigned long __unused2; +#endif + __kernel_time_t shm_dtime; /* last detach time */ +#ifndef __powerpc64__ + unsigned long __unused3; +#endif + __kernel_time_t shm_ctime; /* last change time */ +#ifndef __powerpc64__ + unsigned long __unused4; +#endif + size_t shm_segsz; /* size of segment (bytes) */ + __kernel_pid_t shm_cpid; /* pid of creator */ + __kernel_pid_t shm_lpid; /* pid of last operator */ + unsigned long shm_nattch; /* no. of current attaches */ + unsigned long __unused5; + unsigned long __unused6; +}; + +struct shminfo64 { + unsigned long shmmax; + unsigned long shmmin; + unsigned long shmmni; + unsigned long shmseg; + unsigned long shmall; + unsigned long __unused1; + unsigned long __unused2; + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _ASM_POWERPC_SHMBUF_H */ diff --git a/arch/powerpc/include/asm/shmparam.h b/arch/powerpc/include/asm/shmparam.h new file mode 100644 index 00000000000..5cda42a6d39 --- /dev/null +++ b/arch/powerpc/include/asm/shmparam.h @@ -0,0 +1,6 @@ +#ifndef _ASM_POWERPC_SHMPARAM_H +#define _ASM_POWERPC_SHMPARAM_H + +#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ + +#endif /* _ASM_POWERPC_SHMPARAM_H */ diff --git a/arch/powerpc/include/asm/sigcontext.h b/arch/powerpc/include/asm/sigcontext.h new file mode 100644 index 00000000000..9c1f24fd5d1 --- /dev/null +++ b/arch/powerpc/include/asm/sigcontext.h @@ -0,0 +1,87 @@ +#ifndef _ASM_POWERPC_SIGCONTEXT_H +#define _ASM_POWERPC_SIGCONTEXT_H + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include +#include +#ifdef __powerpc64__ +#include +#endif + +struct sigcontext { + unsigned long _unused[4]; + int signal; +#ifdef __powerpc64__ + int _pad0; +#endif + unsigned long handler; + unsigned long oldmask; + struct pt_regs __user *regs; +#ifdef __powerpc64__ + elf_gregset_t gp_regs; + elf_fpregset_t fp_regs; +/* + * To maintain compatibility with current implementations the sigcontext is + * extended by appending a pointer (v_regs) to a quadword type (elf_vrreg_t) + * followed by an unstructured (vmx_reserve) field of 69 doublewords. This + * allows the array of vector registers to be quadword aligned independent of + * the alignment of the containing sigcontext or ucontext. It is the + * responsibility of the code setting the sigcontext to set this pointer to + * either NULL (if this processor does not support the VMX feature) or the + * address of the first quadword within the allocated (vmx_reserve) area. + * + * The pointer (v_regs) of vector type (elf_vrreg_t) is type compatible with + * an array of 34 quadword entries (elf_vrregset_t). The entries with + * indexes 0-31 contain the corresponding vector registers. The entry with + * index 32 contains the vscr as the last word (offset 12) within the + * quadword. This allows the vscr to be stored as either a quadword (since + * it must be copied via a vector register to/from storage) or as a word. + * The entry with index 33 contains the vrsave as the first word (offset 0) + * within the quadword. + * + * Part of the VSX data is stored here also by extending vmx_restore + * by an additional 32 double words. Architecturally the layout of + * the VSR registers and how they overlap on top of the legacy FPR and + * VR registers is shown below: + * + * VSR doubleword 0 VSR doubleword 1 + * ---------------------------------------------------------------- + * VSR[0] | FPR[0] | | + * ---------------------------------------------------------------- + * VSR[1] | FPR[1] | | + * ---------------------------------------------------------------- + * | ... | | + * | ... | | + * ---------------------------------------------------------------- + * VSR[30] | FPR[30] | | + * ---------------------------------------------------------------- + * VSR[31] | FPR[31] | | + * ---------------------------------------------------------------- + * VSR[32] | VR[0] | + * ---------------------------------------------------------------- + * VSR[33] | VR[1] | + * ---------------------------------------------------------------- + * | ... | + * | ... | + * ---------------------------------------------------------------- + * VSR[62] | VR[30] | + * ---------------------------------------------------------------- + * VSR[63] | VR[31] | + * ---------------------------------------------------------------- + * + * FPR/VSR 0-31 doubleword 0 is stored in fp_regs, and VMX/VSR 32-63 + * is stored at the start of vmx_reserve. vmx_reserve is extended for + * backwards compatility to store VSR 0-31 doubleword 1 after the VMX + * registers and vscr/vrsave. + */ + elf_vrreg_t __user *v_regs; + long vmx_reserve[ELF_NVRREG+ELF_NVRREG+32+1]; +#endif +}; + +#endif /* _ASM_POWERPC_SIGCONTEXT_H */ diff --git a/arch/powerpc/include/asm/siginfo.h b/arch/powerpc/include/asm/siginfo.h new file mode 100644 index 00000000000..12f1bce037b --- /dev/null +++ b/arch/powerpc/include/asm/siginfo.h @@ -0,0 +1,26 @@ +#ifndef _ASM_POWERPC_SIGINFO_H +#define _ASM_POWERPC_SIGINFO_H + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifdef __powerpc64__ +# define __ARCH_SI_PREAMBLE_SIZE (4 * sizeof(int)) +# define SI_PAD_SIZE32 ((SI_MAX_SIZE/sizeof(int)) - 3) +#endif + +#include + +/* + * SIGTRAP si_codes + */ +#define TRAP_BRANCH (__SI_FAULT|3) /* process taken branch trap */ +#define TRAP_HWBKPT (__SI_FAULT|4) /* hardware breakpoint or watchpoint */ +#undef NSIGTRAP +#define NSIGTRAP 4 + +#endif /* _ASM_POWERPC_SIGINFO_H */ diff --git a/arch/powerpc/include/asm/signal.h b/arch/powerpc/include/asm/signal.h new file mode 100644 index 00000000000..a7360cdd99e --- /dev/null +++ b/arch/powerpc/include/asm/signal.h @@ -0,0 +1,150 @@ +#ifndef _ASM_POWERPC_SIGNAL_H +#define _ASM_POWERPC_SIGNAL_H + +#include + +#define _NSIG 64 +#ifdef __powerpc64__ +#define _NSIG_BPW 64 +#else +#define _NSIG_BPW 32 +#endif +#define _NSIG_WORDS (_NSIG / _NSIG_BPW) + +typedef unsigned long old_sigset_t; /* at least 32 bits */ + +typedef struct { + unsigned long sig[_NSIG_WORDS]; +} sigset_t; + +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 +#define SIGBUS 7 +#define SIGFPE 8 +#define SIGKILL 9 +#define SIGUSR1 10 +#define SIGSEGV 11 +#define SIGUSR2 12 +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGSTKFLT 16 +#define SIGCHLD 17 +#define SIGCONT 18 +#define SIGSTOP 19 +#define SIGTSTP 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGURG 23 +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGIO 29 +#define SIGPOLL SIGIO +/* +#define SIGLOST 29 +*/ +#define SIGPWR 30 +#define SIGSYS 31 +#define SIGUNUSED 31 + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 32 +#define SIGRTMAX _NSIG + +/* + * SA_FLAGS values: + * + * SA_ONSTACK is not currently supported, but will allow sigaltstack(2). + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_RESETHAND clears the handler when the signal is delivered. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_NODEFER prevents the current signal from being masked in the handler. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ +#define SA_NOCLDSTOP 0x00000001U +#define SA_NOCLDWAIT 0x00000002U +#define SA_SIGINFO 0x00000004U +#define SA_ONSTACK 0x08000000U +#define SA_RESTART 0x10000000U +#define SA_NODEFER 0x40000000U +#define SA_RESETHAND 0x80000000U + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND + +#define SA_RESTORER 0x04000000U + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 2048 +#define SIGSTKSZ 8192 + +#include + +struct old_sigaction { + __sighandler_t sa_handler; + old_sigset_t sa_mask; + unsigned long sa_flags; + __sigrestore_t sa_restorer; +}; + +struct sigaction { + __sighandler_t sa_handler; + unsigned long sa_flags; + __sigrestore_t sa_restorer; + sigset_t sa_mask; /* mask last for extensibility */ +}; + +struct k_sigaction { + struct sigaction sa; +}; + +typedef struct sigaltstack { + void __user *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + +#ifdef __KERNEL__ +struct pt_regs; +extern void do_signal(struct pt_regs *regs, unsigned long thread_info_flags); +#define ptrace_signal_deliver(regs, cookie) do { } while (0) +#endif /* __KERNEL__ */ + +#ifndef __powerpc64__ +/* + * These are parameters to dbg_sigreturn syscall. They enable or + * disable certain debugging things that can be done from signal + * handlers. The dbg_sigreturn syscall *must* be called from a + * SA_SIGINFO signal so the ucontext can be passed to it. It takes an + * array of struct sig_dbg_op, which has the debug operations to + * perform before returning from the signal. + */ +struct sig_dbg_op { + int dbg_type; + unsigned long dbg_value; +}; + +/* Enable or disable single-stepping. The value sets the state. */ +#define SIG_DBG_SINGLE_STEPPING 1 + +/* Enable or disable branch tracing. The value sets the state. */ +#define SIG_DBG_BRANCH_TRACING 2 +#endif /* ! __powerpc64__ */ + +#endif /* _ASM_POWERPC_SIGNAL_H */ diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h new file mode 100644 index 00000000000..4d28e1e4521 --- /dev/null +++ b/arch/powerpc/include/asm/smp.h @@ -0,0 +1,127 @@ +/* + * smp.h: PowerPC-specific SMP code. + * + * Original was a copy of sparc smp.h. Now heavily modified + * for PPC. + * + * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) + * Copyright (C) 1996-2001 Cort Dougan + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_POWERPC_SMP_H +#define _ASM_POWERPC_SMP_H +#ifdef __KERNEL__ + +#include +#include +#include + +#ifndef __ASSEMBLY__ + +#ifdef CONFIG_PPC64 +#include +#endif +#include + +extern int boot_cpuid; + +extern void cpu_die(void); + +#ifdef CONFIG_SMP + +extern void smp_send_debugger_break(int cpu); +extern void smp_message_recv(int); + +DECLARE_PER_CPU(unsigned int, pvr); + +#ifdef CONFIG_HOTPLUG_CPU +extern void fixup_irqs(cpumask_t map); +int generic_cpu_disable(void); +int generic_cpu_enable(unsigned int cpu); +void generic_cpu_die(unsigned int cpu); +void generic_mach_cpu_die(void); +#endif + +#ifdef CONFIG_PPC64 +#define raw_smp_processor_id() (local_paca->paca_index) +#define hard_smp_processor_id() (get_paca()->hw_cpu_id) +#else +/* 32-bit */ +extern int smp_hw_index[]; + +#define raw_smp_processor_id() (current_thread_info()->cpu) +#define hard_smp_processor_id() (smp_hw_index[smp_processor_id()]) +#define get_hard_smp_processor_id(cpu) (smp_hw_index[(cpu)]) +#define set_hard_smp_processor_id(cpu, phys)\ + (smp_hw_index[(cpu)] = (phys)) +#endif + +DECLARE_PER_CPU(cpumask_t, cpu_sibling_map); +DECLARE_PER_CPU(cpumask_t, cpu_core_map); +extern int cpu_to_core_id(int cpu); + +/* Since OpenPIC has only 4 IPIs, we use slightly different message numbers. + * + * Make sure this matches openpic_request_IPIs in open_pic.c, or what shows up + * in /proc/interrupts will be wrong!!! --Troy */ +#define PPC_MSG_CALL_FUNCTION 0 +#define PPC_MSG_RESCHEDULE 1 +#define PPC_MSG_CALL_FUNC_SINGLE 2 +#define PPC_MSG_DEBUGGER_BREAK 3 + +void smp_init_iSeries(void); +void smp_init_pSeries(void); +void smp_init_cell(void); +void smp_init_celleb(void); +void smp_setup_cpu_maps(void); +void smp_setup_cpu_sibling_map(void); + +extern int __cpu_disable(void); +extern void __cpu_die(unsigned int cpu); + +#else +/* for UP */ +#define hard_smp_processor_id() 0 +#define smp_setup_cpu_maps() + +#endif /* CONFIG_SMP */ + +#ifdef CONFIG_PPC64 +#define get_hard_smp_processor_id(CPU) (paca[(CPU)].hw_cpu_id) +#define set_hard_smp_processor_id(CPU, VAL) \ + do { (paca[(CPU)].hw_cpu_id = (VAL)); } while (0) + +extern void smp_release_cpus(void); + +#else +/* 32-bit */ +#ifndef CONFIG_SMP +extern int boot_cpuid_phys; +#define get_hard_smp_processor_id(cpu) boot_cpuid_phys +#define set_hard_smp_processor_id(cpu, phys) +#endif +#endif + +extern int smt_enabled_at_boot; + +extern int smp_mpic_probe(void); +extern void smp_mpic_setup_cpu(int cpu); +extern void smp_generic_kick_cpu(int nr); + +extern void smp_generic_give_timebase(void); +extern void smp_generic_take_timebase(void); + +extern struct smp_ops_t *smp_ops; + +extern void arch_send_call_function_single_ipi(int cpu); +extern void arch_send_call_function_ipi(cpumask_t mask); + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_SMP_H) */ diff --git a/arch/powerpc/include/asm/smu.h b/arch/powerpc/include/asm/smu.h new file mode 100644 index 00000000000..7ae2753da56 --- /dev/null +++ b/arch/powerpc/include/asm/smu.h @@ -0,0 +1,700 @@ +#ifndef _SMU_H +#define _SMU_H + +/* + * Definitions for talking to the SMU chip in newer G5 PowerMacs + */ +#ifdef __KERNEL__ +#include +#endif +#include + +/* + * Known SMU commands + * + * Most of what is below comes from looking at the Open Firmware driver, + * though this is still incomplete and could use better documentation here + * or there... + */ + + +/* + * Partition info commands + * + * These commands are used to retrieve the sdb-partition-XX datas from + * the SMU. The length is always 2. First byte is the subcommand code + * and second byte is the partition ID. + * + * The reply is 6 bytes: + * + * - 0..1 : partition address + * - 2 : a byte containing the partition ID + * - 3 : length (maybe other bits are rest of header ?) + * + * The data must then be obtained with calls to another command: + * SMU_CMD_MISC_ee_GET_DATABLOCK_REC (described below). + */ +#define SMU_CMD_PARTITION_COMMAND 0x3e +#define SMU_CMD_PARTITION_LATEST 0x01 +#define SMU_CMD_PARTITION_BASE 0x02 +#define SMU_CMD_PARTITION_UPDATE 0x03 + + +/* + * Fan control + * + * This is a "mux" for fan control commands. The command seem to + * act differently based on the number of arguments. With 1 byte + * of argument, this seem to be queries for fans status, setpoint, + * etc..., while with 0xe arguments, we will set the fans speeds. + * + * Queries (1 byte arg): + * --------------------- + * + * arg=0x01: read RPM fans status + * arg=0x02: read RPM fans setpoint + * arg=0x11: read PWM fans status + * arg=0x12: read PWM fans setpoint + * + * the "status" queries return the current speed while the "setpoint" ones + * return the programmed/target speed. It _seems_ that the result is a bit + * mask in the first byte of active/available fans, followed by 6 words (16 + * bits) containing the requested speed. + * + * Setpoint (14 bytes arg): + * ------------------------ + * + * first arg byte is 0 for RPM fans and 0x10 for PWM. Second arg byte is the + * mask of fans affected by the command. Followed by 6 words containing the + * setpoint value for selected fans in the mask (or 0 if mask value is 0) + */ +#define SMU_CMD_FAN_COMMAND 0x4a + + +/* + * Battery access + * + * Same command number as the PMU, could it be same syntax ? + */ +#define SMU_CMD_BATTERY_COMMAND 0x6f +#define SMU_CMD_GET_BATTERY_INFO 0x00 + +/* + * Real time clock control + * + * This is a "mux", first data byte contains the "sub" command. + * The "RTC" part of the SMU controls the date, time, powerup + * timer, but also a PRAM + * + * Dates are in BCD format on 7 bytes: + * [sec] [min] [hour] [weekday] [month day] [month] [year] + * with month being 1 based and year minus 100 + */ +#define SMU_CMD_RTC_COMMAND 0x8e +#define SMU_CMD_RTC_SET_PWRUP_TIMER 0x00 /* i: 7 bytes date */ +#define SMU_CMD_RTC_GET_PWRUP_TIMER 0x01 /* o: 7 bytes date */ +#define SMU_CMD_RTC_STOP_PWRUP_TIMER 0x02 +#define SMU_CMD_RTC_SET_PRAM_BYTE_ACC 0x20 /* i: 1 byte (address?) */ +#define SMU_CMD_RTC_SET_PRAM_AUTOINC 0x21 /* i: 1 byte (data?) */ +#define SMU_CMD_RTC_SET_PRAM_LO_BYTES 0x22 /* i: 10 bytes */ +#define SMU_CMD_RTC_SET_PRAM_HI_BYTES 0x23 /* i: 10 bytes */ +#define SMU_CMD_RTC_GET_PRAM_BYTE 0x28 /* i: 1 bytes (address?) */ +#define SMU_CMD_RTC_GET_PRAM_LO_BYTES 0x29 /* o: 10 bytes */ +#define SMU_CMD_RTC_GET_PRAM_HI_BYTES 0x2a /* o: 10 bytes */ +#define SMU_CMD_RTC_SET_DATETIME 0x80 /* i: 7 bytes date */ +#define SMU_CMD_RTC_GET_DATETIME 0x81 /* o: 7 bytes date */ + + /* + * i2c commands + * + * To issue an i2c command, first is to send a parameter block to the + * the SMU. This is a command of type 0x9a with 9 bytes of header + * eventually followed by data for a write: + * + * 0: bus number (from device-tree usually, SMU has lots of busses !) + * 1: transfer type/format (see below) + * 2: device address. For combined and combined4 type transfers, this + * is the "write" version of the address (bit 0x01 cleared) + * 3: subaddress length (0..3) + * 4: subaddress byte 0 (or only byte for subaddress length 1) + * 5: subaddress byte 1 + * 6: subaddress byte 2 + * 7: combined address (device address for combined mode data phase) + * 8: data length + * + * The transfer types are the same good old Apple ones it seems, + * that is: + * - 0x00: Simple transfer + * - 0x01: Subaddress transfer (addr write + data tx, no restart) + * - 0x02: Combined transfer (addr write + restart + data tx) + * + * This is then followed by actual data for a write. + * + * At this point, the OF driver seems to have a limitation on transfer + * sizes of 0xd bytes on reads and 0x5 bytes on writes. I do not know + * wether this is just an OF limit due to some temporary buffer size + * or if this is an SMU imposed limit. This driver has the same limitation + * for now as I use a 0x10 bytes temporary buffer as well + * + * Once that is completed, a response is expected from the SMU. This is + * obtained via a command of type 0x9a with a length of 1 byte containing + * 0 as the data byte. OF also fills the rest of the data buffer with 0xff's + * though I can't tell yet if this is actually necessary. Once this command + * is complete, at this point, all I can tell is what OF does. OF tests + * byte 0 of the reply: + * - on read, 0xfe or 0xfc : bus is busy, wait (see below) or nak ? + * - on read, 0x00 or 0x01 : reply is in buffer (after the byte 0) + * - on write, < 0 -> failure (immediate exit) + * - else, OF just exists (without error, weird) + * + * So on read, there is this wait-for-busy thing when getting a 0xfc or + * 0xfe result. OF does a loop of up to 64 retries, waiting 20ms and + * doing the above again until either the retries expire or the result + * is no longer 0xfe or 0xfc + * + * The Darwin I2C driver is less subtle though. On any non-success status + * from the response command, it waits 5ms and tries again up to 20 times, + * it doesn't differenciate between fatal errors or "busy" status. + * + * This driver provides an asynchronous paramblock based i2c command + * interface to be used either directly by low level code or by a higher + * level driver interfacing to the linux i2c layer. The current + * implementation of this relies on working timers & timer interrupts + * though, so be careful of calling context for now. This may be "fixed" + * in the future by adding a polling facility. + */ +#define SMU_CMD_I2C_COMMAND 0x9a + /* transfer types */ +#define SMU_I2C_TRANSFER_SIMPLE 0x00 +#define SMU_I2C_TRANSFER_STDSUB 0x01 +#define SMU_I2C_TRANSFER_COMBINED 0x02 + +/* + * Power supply control + * + * The "sub" command is an ASCII string in the data, the + * data length is that of the string. + * + * The VSLEW command can be used to get or set the voltage slewing. + * - length 5 (only "VSLEW") : it returns "DONE" and 3 bytes of + * reply at data offset 6, 7 and 8. + * - length 8 ("VSLEWxyz") has 3 additional bytes appended, and is + * used to set the voltage slewing point. The SMU replies with "DONE" + * I yet have to figure out their exact meaning of those 3 bytes in + * both cases. They seem to be: + * x = processor mask + * y = op. point index + * z = processor freq. step index + * I haven't yet decyphered result codes + * + */ +#define SMU_CMD_POWER_COMMAND 0xaa +#define SMU_CMD_POWER_RESTART "RESTART" +#define SMU_CMD_POWER_SHUTDOWN "SHUTDOWN" +#define SMU_CMD_POWER_VOLTAGE_SLEW "VSLEW" + +/* + * Read ADC sensors + * + * This command takes one byte of parameter: the sensor ID (or "reg" + * value in the device-tree) and returns a 16 bits value + */ +#define SMU_CMD_READ_ADC 0xd8 + + +/* Misc commands + * + * This command seem to be a grab bag of various things + * + * Parameters: + * 1: subcommand + */ +#define SMU_CMD_MISC_df_COMMAND 0xdf + +/* + * Sets "system ready" status + * + * I did not yet understand how it exactly works or what it does. + * + * Guessing from OF code, 0x02 activates the display backlight. Apple uses/used + * the same codebase for all OF versions. On PowerBooks, this command would + * enable the backlight. For the G5s, it only activates the front LED. However, + * don't take this for granted. + * + * Parameters: + * 2: status [0x00, 0x01 or 0x02] + */ +#define SMU_CMD_MISC_df_SET_DISPLAY_LIT 0x02 + +/* + * Sets mode of power switch. + * + * What this actually does is not yet known. Maybe it enables some interrupt. + * + * Parameters: + * 2: enable power switch? [0x00 or 0x01] + * 3 (optional): enable nmi? [0x00 or 0x01] + * + * Returns: + * If parameter 2 is 0x00 and parameter 3 is not specified, returns wether + * NMI is enabled. Otherwise unknown. + */ +#define SMU_CMD_MISC_df_NMI_OPTION 0x04 + +/* Sets LED dimm offset. + * + * The front LED dimms itself during sleep. Its brightness (or, well, the PWM + * frequency) depends on current time. Therefore, the SMU needs to know the + * timezone. + * + * Parameters: + * 2-8: unknown (BCD coding) + */ +#define SMU_CMD_MISC_df_DIMM_OFFSET 0x99 + + +/* + * Version info commands + * + * Parameters: + * 1 (optional): Specifies version part to retrieve + * + * Returns: + * Version value + */ +#define SMU_CMD_VERSION_COMMAND 0xea +#define SMU_VERSION_RUNNING 0x00 +#define SMU_VERSION_BASE 0x01 +#define SMU_VERSION_UPDATE 0x02 + + +/* + * Switches + * + * These are switches whose status seems to be known to the SMU. + * + * Parameters: + * none + * + * Result: + * Switch bits (ORed, see below) + */ +#define SMU_CMD_SWITCHES 0xdc + +/* Switches bits */ +#define SMU_SWITCH_CASE_CLOSED 0x01 +#define SMU_SWITCH_AC_POWER 0x04 +#define SMU_SWITCH_POWER_SWITCH 0x08 + + +/* + * Misc commands + * + * This command seem to be a grab bag of various things + * + * SMU_CMD_MISC_ee_GET_DATABLOCK_REC is used, among others, to + * transfer blocks of data from the SMU. So far, I've decrypted it's + * usage to retrieve partition data. In order to do that, you have to + * break your transfer in "chunks" since that command cannot transfer + * more than a chunk at a time. The chunk size used by OF is 0xe bytes, + * but it seems that the darwin driver will let you do 0x1e bytes if + * your "PMU" version is >= 0x30. You can get the "PMU" version apparently + * either in the last 16 bits of property "smu-version-pmu" or as the 16 + * bytes at offset 1 of "smu-version-info" + * + * For each chunk, the command takes 7 bytes of arguments: + * byte 0: subcommand code (0x02) + * byte 1: 0x04 (always, I don't know what it means, maybe the address + * space to use or some other nicety. It's hard coded in OF) + * byte 2..5: SMU address of the chunk (big endian 32 bits) + * byte 6: size to transfer (up to max chunk size) + * + * The data is returned directly + */ +#define SMU_CMD_MISC_ee_COMMAND 0xee +#define SMU_CMD_MISC_ee_GET_DATABLOCK_REC 0x02 + +/* Retrieves currently used watts. + * + * Parameters: + * 1: 0x03 (Meaning unknown) + */ +#define SMU_CMD_MISC_ee_GET_WATTS 0x03 + +#define SMU_CMD_MISC_ee_LEDS_CTRL 0x04 /* i: 00 (00,01) [00] */ +#define SMU_CMD_MISC_ee_GET_DATA 0x05 /* i: 00 , o: ?? */ + + +/* + * Power related commands + * + * Parameters: + * 1: subcommand + */ +#define SMU_CMD_POWER_EVENTS_COMMAND 0x8f + +/* SMU_POWER_EVENTS subcommands */ +enum { + SMU_PWR_GET_POWERUP_EVENTS = 0x00, + SMU_PWR_SET_POWERUP_EVENTS = 0x01, + SMU_PWR_CLR_POWERUP_EVENTS = 0x02, + SMU_PWR_GET_WAKEUP_EVENTS = 0x03, + SMU_PWR_SET_WAKEUP_EVENTS = 0x04, + SMU_PWR_CLR_WAKEUP_EVENTS = 0x05, + + /* + * Get last shutdown cause + * + * Returns: + * 1 byte (signed char): Last shutdown cause. Exact meaning unknown. + */ + SMU_PWR_LAST_SHUTDOWN_CAUSE = 0x07, + + /* + * Sets or gets server ID. Meaning or use is unknown. + * + * Parameters: + * 2 (optional): Set server ID (1 byte) + * + * Returns: + * 1 byte (server ID?) + */ + SMU_PWR_SERVER_ID = 0x08, +}; + +/* Power events wakeup bits */ +enum { + SMU_PWR_WAKEUP_KEY = 0x01, /* Wake on key press */ + SMU_PWR_WAKEUP_AC_INSERT = 0x02, /* Wake on AC adapter plug */ + SMU_PWR_WAKEUP_AC_CHANGE = 0x04, + SMU_PWR_WAKEUP_LID_OPEN = 0x08, + SMU_PWR_WAKEUP_RING = 0x10, +}; + + +/* + * - Kernel side interface - + */ + +#ifdef __KERNEL__ + +/* + * Asynchronous SMU commands + * + * Fill up this structure and submit it via smu_queue_command(), + * and get notified by the optional done() callback, or because + * status becomes != 1 + */ + +struct smu_cmd; + +struct smu_cmd +{ + /* public */ + u8 cmd; /* command */ + int data_len; /* data len */ + int reply_len; /* reply len */ + void *data_buf; /* data buffer */ + void *reply_buf; /* reply buffer */ + int status; /* command status */ + void (*done)(struct smu_cmd *cmd, void *misc); + void *misc; + + /* private */ + struct list_head link; +}; + +/* + * Queues an SMU command, all fields have to be initialized + */ +extern int smu_queue_cmd(struct smu_cmd *cmd); + +/* + * Simple command wrapper. This structure embeds a small buffer + * to ease sending simple SMU commands from the stack + */ +struct smu_simple_cmd +{ + struct smu_cmd cmd; + u8 buffer[16]; +}; + +/* + * Queues a simple command. All fields will be initialized by that + * function + */ +extern int smu_queue_simple(struct smu_simple_cmd *scmd, u8 command, + unsigned int data_len, + void (*done)(struct smu_cmd *cmd, void *misc), + void *misc, + ...); + +/* + * Completion helper. Pass it to smu_queue_simple or as 'done' + * member to smu_queue_cmd, it will call complete() on the struct + * completion passed in the "misc" argument + */ +extern void smu_done_complete(struct smu_cmd *cmd, void *misc); + +/* + * Synchronous helpers. Will spin-wait for completion of a command + */ +extern void smu_spinwait_cmd(struct smu_cmd *cmd); + +static inline void smu_spinwait_simple(struct smu_simple_cmd *scmd) +{ + smu_spinwait_cmd(&scmd->cmd); +} + +/* + * Poll routine to call if blocked with irqs off + */ +extern void smu_poll(void); + + +/* + * Init routine, presence check.... + */ +extern int smu_init(void); +extern int smu_present(void); +struct of_device; +extern struct of_device *smu_get_ofdev(void); + + +/* + * Common command wrappers + */ +extern void smu_shutdown(void); +extern void smu_restart(void); +struct rtc_time; +extern int smu_get_rtc_time(struct rtc_time *time, int spinwait); +extern int smu_set_rtc_time(struct rtc_time *time, int spinwait); + +/* + * SMU command buffer absolute address, exported by pmac_setup, + * this is allocated very early during boot. + */ +extern unsigned long smu_cmdbuf_abs; + + +/* + * Kenrel asynchronous i2c interface + */ + +#define SMU_I2C_READ_MAX 0x1d +#define SMU_I2C_WRITE_MAX 0x15 + +/* SMU i2c header, exactly matches i2c header on wire */ +struct smu_i2c_param +{ + u8 bus; /* SMU bus ID (from device tree) */ + u8 type; /* i2c transfer type */ + u8 devaddr; /* device address (includes direction) */ + u8 sublen; /* subaddress length */ + u8 subaddr[3]; /* subaddress */ + u8 caddr; /* combined address, filled by SMU driver */ + u8 datalen; /* length of transfer */ + u8 data[SMU_I2C_READ_MAX]; /* data */ +}; + +struct smu_i2c_cmd +{ + /* public */ + struct smu_i2c_param info; + void (*done)(struct smu_i2c_cmd *cmd, void *misc); + void *misc; + int status; /* 1 = pending, 0 = ok, <0 = fail */ + + /* private */ + struct smu_cmd scmd; + int read; + int stage; + int retries; + u8 pdata[32]; + struct list_head link; +}; + +/* + * Call this to queue an i2c command to the SMU. You must fill info, + * including info.data for a write, done and misc. + * For now, no polling interface is provided so you have to use completion + * callback. + */ +extern int smu_queue_i2c(struct smu_i2c_cmd *cmd); + + +#endif /* __KERNEL__ */ + + +/* + * - SMU "sdb" partitions informations - + */ + + +/* + * Partition header format + */ +struct smu_sdbp_header { + __u8 id; + __u8 len; + __u8 version; + __u8 flags; +}; + + + /* + * demangle 16 and 32 bits integer in some SMU partitions + * (currently, afaik, this concerns only the FVT partition + * (0x12) + */ +#define SMU_U16_MIX(x) le16_to_cpu(x); +#define SMU_U32_MIX(x) ((((x) & 0xff00ff00u) >> 8)|(((x) & 0x00ff00ffu) << 8)) + + +/* This is the definition of the SMU sdb-partition-0x12 table (called + * CPU F/V/T operating points in Darwin). The definition for all those + * SMU tables should be moved to some separate file + */ +#define SMU_SDB_FVT_ID 0x12 + +struct smu_sdbp_fvt { + __u32 sysclk; /* Base SysClk frequency in Hz for + * this operating point. Value need to + * be unmixed with SMU_U32_MIX() + */ + __u8 pad; + __u8 maxtemp; /* Max temp. supported by this + * operating point + */ + + __u16 volts[3]; /* CPU core voltage for the 3 + * PowerTune modes, a mode with + * 0V = not supported. Value need + * to be unmixed with SMU_U16_MIX() + */ +}; + +/* This partition contains voltage & current sensor calibration + * informations + */ +#define SMU_SDB_CPUVCP_ID 0x21 + +struct smu_sdbp_cpuvcp { + __u16 volt_scale; /* u4.12 fixed point */ + __s16 volt_offset; /* s4.12 fixed point */ + __u16 curr_scale; /* u4.12 fixed point */ + __s16 curr_offset; /* s4.12 fixed point */ + __s32 power_quads[3]; /* s4.28 fixed point */ +}; + +/* This partition contains CPU thermal diode calibration + */ +#define SMU_SDB_CPUDIODE_ID 0x18 + +struct smu_sdbp_cpudiode { + __u16 m_value; /* u1.15 fixed point */ + __s16 b_value; /* s10.6 fixed point */ + +}; + +/* This partition contains Slots power calibration + */ +#define SMU_SDB_SLOTSPOW_ID 0x78 + +struct smu_sdbp_slotspow { + __u16 pow_scale; /* u4.12 fixed point */ + __s16 pow_offset; /* s4.12 fixed point */ +}; + +/* This partition contains machine specific version information about + * the sensor/control layout + */ +#define SMU_SDB_SENSORTREE_ID 0x25 + +struct smu_sdbp_sensortree { + __u8 model_id; + __u8 unknown[3]; +}; + +/* This partition contains CPU thermal control PID informations. So far + * only single CPU machines have been seen with an SMU, so we assume this + * carries only informations for those + */ +#define SMU_SDB_CPUPIDDATA_ID 0x17 + +struct smu_sdbp_cpupiddata { + __u8 unknown1; + __u8 target_temp_delta; + __u8 unknown2; + __u8 history_len; + __s16 power_adj; + __u16 max_power; + __s32 gp,gr,gd; +}; + + +/* Other partitions without known structures */ +#define SMU_SDB_DEBUG_SWITCHES_ID 0x05 + +#ifdef __KERNEL__ +/* + * This returns the pointer to an SMU "sdb" partition data or NULL + * if not found. The data format is described below + */ +extern const struct smu_sdbp_header *smu_get_sdb_partition(int id, + unsigned int *size); + +/* Get "sdb" partition data from an SMU satellite */ +extern struct smu_sdbp_header *smu_sat_get_sdb_partition(unsigned int sat_id, + int id, unsigned int *size); + + +#endif /* __KERNEL__ */ + + +/* + * - Userland interface - + */ + +/* + * A given instance of the device can be configured for 2 different + * things at the moment: + * + * - sending SMU commands (default at open() time) + * - receiving SMU events (not yet implemented) + * + * Commands are written with write() of a command block. They can be + * "driver" commands (for example to switch to event reception mode) + * or real SMU commands. They are made of a header followed by command + * data if any. + * + * For SMU commands (not for driver commands), you can then read() back + * a reply. The reader will be blocked or not depending on how the device + * file is opened. poll() isn't implemented yet. The reply will consist + * of a header as well, followed by the reply data if any. You should + * always provide a buffer large enough for the maximum reply data, I + * recommand one page. + * + * It is illegal to send SMU commands through a file descriptor configured + * for events reception + * + */ +struct smu_user_cmd_hdr +{ + __u32 cmdtype; +#define SMU_CMDTYPE_SMU 0 /* SMU command */ +#define SMU_CMDTYPE_WANTS_EVENTS 1 /* switch fd to events mode */ +#define SMU_CMDTYPE_GET_PARTITION 2 /* retrieve an sdb partition */ + + __u8 cmd; /* SMU command byte */ + __u8 pad[3]; /* padding */ + __u32 data_len; /* Length of data following */ +}; + +struct smu_user_reply_hdr +{ + __u32 status; /* Command status */ + __u32 reply_len; /* Length of data follwing */ +}; + +#endif /* _SMU_H */ diff --git a/arch/powerpc/include/asm/socket.h b/arch/powerpc/include/asm/socket.h new file mode 100644 index 00000000000..f5a4e168e49 --- /dev/null +++ b/arch/powerpc/include/asm/socket.h @@ -0,0 +1,64 @@ +#ifndef _ASM_POWERPC_SOCKET_H +#define _ASM_POWERPC_SOCKET_H + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include + +/* For setsockopt(2) */ +#define SOL_SOCKET 1 + +#define SO_DEBUG 1 +#define SO_REUSEADDR 2 +#define SO_TYPE 3 +#define SO_ERROR 4 +#define SO_DONTROUTE 5 +#define SO_BROADCAST 6 +#define SO_SNDBUF 7 +#define SO_RCVBUF 8 +#define SO_SNDBUFFORCE 32 +#define SO_RCVBUFFORCE 33 +#define SO_KEEPALIVE 9 +#define SO_OOBINLINE 10 +#define SO_NO_CHECK 11 +#define SO_PRIORITY 12 +#define SO_LINGER 13 +#define SO_BSDCOMPAT 14 +/* To add :#define SO_REUSEPORT 15 */ +#define SO_RCVLOWAT 16 +#define SO_SNDLOWAT 17 +#define SO_RCVTIMEO 18 +#define SO_SNDTIMEO 19 +#define SO_PASSCRED 20 +#define SO_PEERCRED 21 + +/* Security levels - as per NRL IPv6 - don't actually do anything */ +#define SO_SECURITY_AUTHENTICATION 22 +#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 +#define SO_SECURITY_ENCRYPTION_NETWORK 24 + +#define SO_BINDTODEVICE 25 + +/* Socket filtering */ +#define SO_ATTACH_FILTER 26 +#define SO_DETACH_FILTER 27 + +#define SO_PEERNAME 28 +#define SO_TIMESTAMP 29 +#define SCM_TIMESTAMP SO_TIMESTAMP + +#define SO_ACCEPTCONN 30 + +#define SO_PEERSEC 31 +#define SO_PASSSEC 34 +#define SO_TIMESTAMPNS 35 +#define SCM_TIMESTAMPNS SO_TIMESTAMPNS + +#define SO_MARK 36 + +#endif /* _ASM_POWERPC_SOCKET_H */ diff --git a/arch/powerpc/include/asm/sockios.h b/arch/powerpc/include/asm/sockios.h new file mode 100644 index 00000000000..55cef7675a3 --- /dev/null +++ b/arch/powerpc/include/asm/sockios.h @@ -0,0 +1,20 @@ +#ifndef _ASM_POWERPC_SOCKIOS_H +#define _ASM_POWERPC_SOCKIOS_H + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/* Socket-level I/O control calls. */ +#define FIOSETOWN 0x8901 +#define SIOCSPGRP 0x8902 +#define FIOGETOWN 0x8903 +#define SIOCGPGRP 0x8904 +#define SIOCATMARK 0x8905 +#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ +#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ + +#endif /* _ASM_POWERPC_SOCKIOS_H */ diff --git a/arch/powerpc/include/asm/sparsemem.h b/arch/powerpc/include/asm/sparsemem.h new file mode 100644 index 00000000000..54a47ea2c3a --- /dev/null +++ b/arch/powerpc/include/asm/sparsemem.h @@ -0,0 +1,32 @@ +#ifndef _ASM_POWERPC_SPARSEMEM_H +#define _ASM_POWERPC_SPARSEMEM_H 1 +#ifdef __KERNEL__ + +#ifdef CONFIG_SPARSEMEM +/* + * SECTION_SIZE_BITS 2^N: how big each section will be + * MAX_PHYSADDR_BITS 2^N: how much physical address space we have + * MAX_PHYSMEM_BITS 2^N: how much memory we can have in that space + */ +#define SECTION_SIZE_BITS 24 + +#define MAX_PHYSADDR_BITS 44 +#define MAX_PHYSMEM_BITS 44 + +#endif /* CONFIG_SPARSEMEM */ + +#ifdef CONFIG_MEMORY_HOTPLUG +extern void create_section_mapping(unsigned long start, unsigned long end); +extern int remove_section_mapping(unsigned long start, unsigned long end); +#ifdef CONFIG_NUMA +extern int hot_add_scn_to_nid(unsigned long scn_addr); +#else +static inline int hot_add_scn_to_nid(unsigned long scn_addr) +{ + return 0; +} +#endif /* CONFIG_NUMA */ +#endif /* CONFIG_MEMORY_HOTPLUG */ + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_SPARSEMEM_H */ diff --git a/arch/powerpc/include/asm/spinlock.h b/arch/powerpc/include/asm/spinlock.h new file mode 100644 index 00000000000..f56a843f470 --- /dev/null +++ b/arch/powerpc/include/asm/spinlock.h @@ -0,0 +1,295 @@ +#ifndef __ASM_SPINLOCK_H +#define __ASM_SPINLOCK_H +#ifdef __KERNEL__ + +/* + * Simple spin lock operations. + * + * Copyright (C) 2001-2004 Paul Mackerras , IBM + * Copyright (C) 2001 Anton Blanchard , IBM + * Copyright (C) 2002 Dave Engebretsen , IBM + * Rework to support virtual processors + * + * Type of int is used as a full 64b word is not necessary. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * (the type definitions are in asm/spinlock_types.h) + */ +#include +#ifdef CONFIG_PPC64 +#include +#include +#include +#endif +#include +#include + +#define __raw_spin_is_locked(x) ((x)->slock != 0) + +#ifdef CONFIG_PPC64 +/* use 0x800000yy when locked, where yy == CPU number */ +#define LOCK_TOKEN (*(u32 *)(&get_paca()->lock_token)) +#else +#define LOCK_TOKEN 1 +#endif + +#if defined(CONFIG_PPC64) && defined(CONFIG_SMP) +#define CLEAR_IO_SYNC (get_paca()->io_sync = 0) +#define SYNC_IO do { \ + if (unlikely(get_paca()->io_sync)) { \ + mb(); \ + get_paca()->io_sync = 0; \ + } \ + } while (0) +#else +#define CLEAR_IO_SYNC +#define SYNC_IO +#endif + +/* + * This returns the old value in the lock, so we succeeded + * in getting the lock if the return value is 0. + */ +static inline unsigned long __spin_trylock(raw_spinlock_t *lock) +{ + unsigned long tmp, token; + + token = LOCK_TOKEN; + __asm__ __volatile__( +"1: lwarx %0,0,%2\n\ + cmpwi 0,%0,0\n\ + bne- 2f\n\ + stwcx. %1,0,%2\n\ + bne- 1b\n\ + isync\n\ +2:" : "=&r" (tmp) + : "r" (token), "r" (&lock->slock) + : "cr0", "memory"); + + return tmp; +} + +static inline int __raw_spin_trylock(raw_spinlock_t *lock) +{ + CLEAR_IO_SYNC; + return __spin_trylock(lock) == 0; +} + +/* + * On a system with shared processors (that is, where a physical + * processor is multiplexed between several virtual processors), + * there is no point spinning on a lock if the holder of the lock + * isn't currently scheduled on a physical processor. Instead + * we detect this situation and ask the hypervisor to give the + * rest of our timeslice to the lock holder. + * + * So that we can tell which virtual processor is holding a lock, + * we put 0x80000000 | smp_processor_id() in the lock when it is + * held. Conveniently, we have a word in the paca that holds this + * value. + */ + +#if defined(CONFIG_PPC_SPLPAR) || defined(CONFIG_PPC_ISERIES) +/* We only yield to the hypervisor if we are in shared processor mode */ +#define SHARED_PROCESSOR (get_lppaca()->shared_proc) +extern void __spin_yield(raw_spinlock_t *lock); +extern void __rw_yield(raw_rwlock_t *lock); +#else /* SPLPAR || ISERIES */ +#define __spin_yield(x) barrier() +#define __rw_yield(x) barrier() +#define SHARED_PROCESSOR 0 +#endif + +static inline void __raw_spin_lock(raw_spinlock_t *lock) +{ + CLEAR_IO_SYNC; + while (1) { + if (likely(__spin_trylock(lock) == 0)) + break; + do { + HMT_low(); + if (SHARED_PROCESSOR) + __spin_yield(lock); + } while (unlikely(lock->slock != 0)); + HMT_medium(); + } +} + +static inline +void __raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long flags) +{ + unsigned long flags_dis; + + CLEAR_IO_SYNC; + while (1) { + if (likely(__spin_trylock(lock) == 0)) + break; + local_save_flags(flags_dis); + local_irq_restore(flags); + do { + HMT_low(); + if (SHARED_PROCESSOR) + __spin_yield(lock); + } while (unlikely(lock->slock != 0)); + HMT_medium(); + local_irq_restore(flags_dis); + } +} + +static inline void __raw_spin_unlock(raw_spinlock_t *lock) +{ + SYNC_IO; + __asm__ __volatile__("# __raw_spin_unlock\n\t" + LWSYNC_ON_SMP: : :"memory"); + lock->slock = 0; +} + +#ifdef CONFIG_PPC64 +extern void __raw_spin_unlock_wait(raw_spinlock_t *lock); +#else +#define __raw_spin_unlock_wait(lock) \ + do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0) +#endif + +/* + * Read-write spinlocks, allowing multiple readers + * but only one writer. + * + * NOTE! it is quite common to have readers in interrupts + * but no interrupt writers. For those circumstances we + * can "mix" irq-safe locks - any writer needs to get a + * irq-safe write-lock, but readers can get non-irqsafe + * read-locks. + */ + +#define __raw_read_can_lock(rw) ((rw)->lock >= 0) +#define __raw_write_can_lock(rw) (!(rw)->lock) + +#ifdef CONFIG_PPC64 +#define __DO_SIGN_EXTEND "extsw %0,%0\n" +#define WRLOCK_TOKEN LOCK_TOKEN /* it's negative */ +#else +#define __DO_SIGN_EXTEND +#define WRLOCK_TOKEN (-1) +#endif + +/* + * This returns the old value in the lock + 1, + * so we got a read lock if the return value is > 0. + */ +static inline long __read_trylock(raw_rwlock_t *rw) +{ + long tmp; + + __asm__ __volatile__( +"1: lwarx %0,0,%1\n" + __DO_SIGN_EXTEND +" addic. %0,%0,1\n\ + ble- 2f\n" + PPC405_ERR77(0,%1) +" stwcx. %0,0,%1\n\ + bne- 1b\n\ + isync\n\ +2:" : "=&r" (tmp) + : "r" (&rw->lock) + : "cr0", "xer", "memory"); + + return tmp; +} + +/* + * This returns the old value in the lock, + * so we got the write lock if the return value is 0. + */ +static inline long __write_trylock(raw_rwlock_t *rw) +{ + long tmp, token; + + token = WRLOCK_TOKEN; + __asm__ __volatile__( +"1: lwarx %0,0,%2\n\ + cmpwi 0,%0,0\n\ + bne- 2f\n" + PPC405_ERR77(0,%1) +" stwcx. %1,0,%2\n\ + bne- 1b\n\ + isync\n\ +2:" : "=&r" (tmp) + : "r" (token), "r" (&rw->lock) + : "cr0", "memory"); + + return tmp; +} + +static inline void __raw_read_lock(raw_rwlock_t *rw) +{ + while (1) { + if (likely(__read_trylock(rw) > 0)) + break; + do { + HMT_low(); + if (SHARED_PROCESSOR) + __rw_yield(rw); + } while (unlikely(rw->lock < 0)); + HMT_medium(); + } +} + +static inline void __raw_write_lock(raw_rwlock_t *rw) +{ + while (1) { + if (likely(__write_trylock(rw) == 0)) + break; + do { + HMT_low(); + if (SHARED_PROCESSOR) + __rw_yield(rw); + } while (unlikely(rw->lock != 0)); + HMT_medium(); + } +} + +static inline int __raw_read_trylock(raw_rwlock_t *rw) +{ + return __read_trylock(rw) > 0; +} + +static inline int __raw_write_trylock(raw_rwlock_t *rw) +{ + return __write_trylock(rw) == 0; +} + +static inline void __raw_read_unlock(raw_rwlock_t *rw) +{ + long tmp; + + __asm__ __volatile__( + "# read_unlock\n\t" + LWSYNC_ON_SMP +"1: lwarx %0,0,%1\n\ + addic %0,%0,-1\n" + PPC405_ERR77(0,%1) +" stwcx. %0,0,%1\n\ + bne- 1b" + : "=&r"(tmp) + : "r"(&rw->lock) + : "cr0", "memory"); +} + +static inline void __raw_write_unlock(raw_rwlock_t *rw) +{ + __asm__ __volatile__("# write_unlock\n\t" + LWSYNC_ON_SMP: : :"memory"); + rw->lock = 0; +} + +#define _raw_spin_relax(lock) __spin_yield(lock) +#define _raw_read_relax(lock) __rw_yield(lock) +#define _raw_write_relax(lock) __rw_yield(lock) + +#endif /* __KERNEL__ */ +#endif /* __ASM_SPINLOCK_H */ diff --git a/arch/powerpc/include/asm/spinlock_types.h b/arch/powerpc/include/asm/spinlock_types.h new file mode 100644 index 00000000000..74236c9f05b --- /dev/null +++ b/arch/powerpc/include/asm/spinlock_types.h @@ -0,0 +1,20 @@ +#ifndef _ASM_POWERPC_SPINLOCK_TYPES_H +#define _ASM_POWERPC_SPINLOCK_TYPES_H + +#ifndef __LINUX_SPINLOCK_TYPES_H +# error "please don't include this file directly" +#endif + +typedef struct { + volatile unsigned int slock; +} raw_spinlock_t; + +#define __RAW_SPIN_LOCK_UNLOCKED { 0 } + +typedef struct { + volatile signed int lock; +} raw_rwlock_t; + +#define __RAW_RW_LOCK_UNLOCKED { 0 } + +#endif diff --git a/arch/powerpc/include/asm/spu.h b/arch/powerpc/include/asm/spu.h new file mode 100644 index 00000000000..8b2eb044270 --- /dev/null +++ b/arch/powerpc/include/asm/spu.h @@ -0,0 +1,732 @@ +/* + * SPU core / file system interface and HW structures + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 + * + * Author: Arnd Bergmann + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _SPU_H +#define _SPU_H +#ifdef __KERNEL__ + +#include +#include + +#define LS_SIZE (256 * 1024) +#define LS_ADDR_MASK (LS_SIZE - 1) + +#define MFC_PUT_CMD 0x20 +#define MFC_PUTS_CMD 0x28 +#define MFC_PUTR_CMD 0x30 +#define MFC_PUTF_CMD 0x22 +#define MFC_PUTB_CMD 0x21 +#define MFC_PUTFS_CMD 0x2A +#define MFC_PUTBS_CMD 0x29 +#define MFC_PUTRF_CMD 0x32 +#define MFC_PUTRB_CMD 0x31 +#define MFC_PUTL_CMD 0x24 +#define MFC_PUTRL_CMD 0x34 +#define MFC_PUTLF_CMD 0x26 +#define MFC_PUTLB_CMD 0x25 +#define MFC_PUTRLF_CMD 0x36 +#define MFC_PUTRLB_CMD 0x35 + +#define MFC_GET_CMD 0x40 +#define MFC_GETS_CMD 0x48 +#define MFC_GETF_CMD 0x42 +#define MFC_GETB_CMD 0x41 +#define MFC_GETFS_CMD 0x4A +#define MFC_GETBS_CMD 0x49 +#define MFC_GETL_CMD 0x44 +#define MFC_GETLF_CMD 0x46 +#define MFC_GETLB_CMD 0x45 + +#define MFC_SDCRT_CMD 0x80 +#define MFC_SDCRTST_CMD 0x81 +#define MFC_SDCRZ_CMD 0x89 +#define MFC_SDCRS_CMD 0x8D +#define MFC_SDCRF_CMD 0x8F + +#define MFC_GETLLAR_CMD 0xD0 +#define MFC_PUTLLC_CMD 0xB4 +#define MFC_PUTLLUC_CMD 0xB0 +#define MFC_PUTQLLUC_CMD 0xB8 +#define MFC_SNDSIG_CMD 0xA0 +#define MFC_SNDSIGB_CMD 0xA1 +#define MFC_SNDSIGF_CMD 0xA2 +#define MFC_BARRIER_CMD 0xC0 +#define MFC_EIEIO_CMD 0xC8 +#define MFC_SYNC_CMD 0xCC + +#define MFC_MIN_DMA_SIZE_SHIFT 4 /* 16 bytes */ +#define MFC_MAX_DMA_SIZE_SHIFT 14 /* 16384 bytes */ +#define MFC_MIN_DMA_SIZE (1 << MFC_MIN_DMA_SIZE_SHIFT) +#define MFC_MAX_DMA_SIZE (1 << MFC_MAX_DMA_SIZE_SHIFT) +#define MFC_MIN_DMA_SIZE_MASK (MFC_MIN_DMA_SIZE - 1) +#define MFC_MAX_DMA_SIZE_MASK (MFC_MAX_DMA_SIZE - 1) +#define MFC_MIN_DMA_LIST_SIZE 0x0008 /* 8 bytes */ +#define MFC_MAX_DMA_LIST_SIZE 0x4000 /* 16K bytes */ + +#define MFC_TAGID_TO_TAGMASK(tag_id) (1 << (tag_id & 0x1F)) + +/* Events for Channels 0-2 */ +#define MFC_DMA_TAG_STATUS_UPDATE_EVENT 0x00000001 +#define MFC_DMA_TAG_CMD_STALL_NOTIFY_EVENT 0x00000002 +#define MFC_DMA_QUEUE_AVAILABLE_EVENT 0x00000008 +#define MFC_SPU_MAILBOX_WRITTEN_EVENT 0x00000010 +#define MFC_DECREMENTER_EVENT 0x00000020 +#define MFC_PU_INT_MAILBOX_AVAILABLE_EVENT 0x00000040 +#define MFC_PU_MAILBOX_AVAILABLE_EVENT 0x00000080 +#define MFC_SIGNAL_2_EVENT 0x00000100 +#define MFC_SIGNAL_1_EVENT 0x00000200 +#define MFC_LLR_LOST_EVENT 0x00000400 +#define MFC_PRIV_ATTN_EVENT 0x00000800 +#define MFC_MULTI_SRC_EVENT 0x00001000 + +/* Flag indicating progress during context switch. */ +#define SPU_CONTEXT_SWITCH_PENDING 0UL +#define SPU_CONTEXT_FAULT_PENDING 1UL + +struct spu_context; +struct spu_runqueue; +struct spu_lscsa; +struct device_node; + +enum spu_utilization_state { + SPU_UTIL_USER, + SPU_UTIL_SYSTEM, + SPU_UTIL_IOWAIT, + SPU_UTIL_IDLE_LOADED, + SPU_UTIL_MAX +}; + +struct spu { + const char *name; + unsigned long local_store_phys; + u8 *local_store; + unsigned long problem_phys; + struct spu_problem __iomem *problem; + struct spu_priv2 __iomem *priv2; + struct list_head cbe_list; + struct list_head full_list; + enum { SPU_FREE, SPU_USED } alloc_state; + int number; + unsigned int irqs[3]; + u32 node; + u64 flags; + u64 class_0_pending; + u64 class_0_dar; + u64 class_1_dar; + u64 class_1_dsisr; + size_t ls_size; + unsigned int slb_replace; + struct mm_struct *mm; + struct spu_context *ctx; + struct spu_runqueue *rq; + unsigned long long timestamp; + pid_t pid; + pid_t tgid; + spinlock_t register_lock; + + void (* wbox_callback)(struct spu *spu); + void (* ibox_callback)(struct spu *spu); + void (* stop_callback)(struct spu *spu, int irq); + void (* mfc_callback)(struct spu *spu); + + char irq_c0[8]; + char irq_c1[8]; + char irq_c2[8]; + + u64 spe_id; + + void* pdata; /* platform private data */ + + /* of based platforms only */ + struct device_node *devnode; + + /* native only */ + struct spu_priv1 __iomem *priv1; + + /* beat only */ + u64 shadow_int_mask_RW[3]; + + struct sys_device sysdev; + + int has_mem_affinity; + struct list_head aff_list; + + struct { + /* protected by interrupt reentrancy */ + enum spu_utilization_state util_state; + unsigned long long tstamp; + unsigned long long times[SPU_UTIL_MAX]; + unsigned long long vol_ctx_switch; + unsigned long long invol_ctx_switch; + unsigned long long min_flt; + unsigned long long maj_flt; + unsigned long long hash_flt; + unsigned long long slb_flt; + unsigned long long class2_intr; + unsigned long long libassist; + } stats; +}; + +struct cbe_spu_info { + struct mutex list_mutex; + struct list_head spus; + int n_spus; + int nr_active; + atomic_t busy_spus; + atomic_t reserved_spus; +}; + +extern struct cbe_spu_info cbe_spu_info[]; + +void spu_init_channels(struct spu *spu); +void spu_irq_setaffinity(struct spu *spu, int cpu); + +void spu_setup_kernel_slbs(struct spu *spu, struct spu_lscsa *lscsa, + void *code, int code_size); + +#ifdef CONFIG_KEXEC +void crash_register_spus(struct list_head *list); +#else +static inline void crash_register_spus(struct list_head *list) +{ +} +#endif + +extern void spu_invalidate_slbs(struct spu *spu); +extern void spu_associate_mm(struct spu *spu, struct mm_struct *mm); +int spu_64k_pages_available(void); + +/* Calls from the memory management to the SPU */ +struct mm_struct; +extern void spu_flush_all_slbs(struct mm_struct *mm); + +/* This interface allows a profiler (e.g., OProfile) to store a ref + * to spu context information that it creates. This caching technique + * avoids the need to recreate this information after a save/restore operation. + * + * Assumes the caller has already incremented the ref count to + * profile_info; then spu_context_destroy must call kref_put + * on prof_info_kref. + */ +void spu_set_profile_private_kref(struct spu_context *ctx, + struct kref *prof_info_kref, + void ( * prof_info_release) (struct kref *kref)); + +void *spu_get_profile_private_kref(struct spu_context *ctx); + +/* system callbacks from the SPU */ +struct spu_syscall_block { + u64 nr_ret; + u64 parm[6]; +}; +extern long spu_sys_callback(struct spu_syscall_block *s); + +/* syscalls implemented in spufs */ +struct file; +struct spufs_calls { + long (*create_thread)(const char __user *name, + unsigned int flags, mode_t mode, + struct file *neighbor); + long (*spu_run)(struct file *filp, __u32 __user *unpc, + __u32 __user *ustatus); + int (*coredump_extra_notes_size)(void); + int (*coredump_extra_notes_write)(struct file *file, loff_t *foffset); + void (*notify_spus_active)(void); + struct module *owner; +}; + +/* return status from spu_run, same as in libspe */ +#define SPE_EVENT_DMA_ALIGNMENT 0x0008 /*A DMA alignment error */ +#define SPE_EVENT_SPE_ERROR 0x0010 /*An illegal instruction error*/ +#define SPE_EVENT_SPE_DATA_SEGMENT 0x0020 /*A DMA segmentation error */ +#define SPE_EVENT_SPE_DATA_STORAGE 0x0040 /*A DMA storage error */ +#define SPE_EVENT_INVALID_DMA 0x0800 /* Invalid MFC DMA */ + +/* + * Flags for sys_spu_create. + */ +#define SPU_CREATE_EVENTS_ENABLED 0x0001 +#define SPU_CREATE_GANG 0x0002 +#define SPU_CREATE_NOSCHED 0x0004 +#define SPU_CREATE_ISOLATE 0x0008 +#define SPU_CREATE_AFFINITY_SPU 0x0010 +#define SPU_CREATE_AFFINITY_MEM 0x0020 + +#define SPU_CREATE_FLAG_ALL 0x003f /* mask of all valid flags */ + + +int register_spu_syscalls(struct spufs_calls *calls); +void unregister_spu_syscalls(struct spufs_calls *calls); + +int spu_add_sysdev_attr(struct sysdev_attribute *attr); +void spu_remove_sysdev_attr(struct sysdev_attribute *attr); + +int spu_add_sysdev_attr_group(struct attribute_group *attrs); +void spu_remove_sysdev_attr_group(struct attribute_group *attrs); + +int spu_handle_mm_fault(struct mm_struct *mm, unsigned long ea, + unsigned long dsisr, unsigned *flt); + +/* + * Notifier blocks: + * + * oprofile can get notified when a context switch is performed + * on an spe. The notifer function that gets called is passed + * a pointer to the SPU structure as well as the object-id that + * identifies the binary running on that SPU now. + * + * For a context save, the object-id that is passed is zero, + * identifying that the kernel will run from that moment on. + * + * For a context restore, the object-id is the value written + * to object-id spufs file from user space and the notifer + * function can assume that spu->ctx is valid. + */ +struct notifier_block; +int spu_switch_event_register(struct notifier_block * n); +int spu_switch_event_unregister(struct notifier_block * n); + +extern void notify_spus_active(void); +extern void do_notify_spus_active(void); + +/* + * This defines the Local Store, Problem Area and Privilege Area of an SPU. + */ + +union mfc_tag_size_class_cmd { + struct { + u16 mfc_size; + u16 mfc_tag; + u8 pad; + u8 mfc_rclassid; + u16 mfc_cmd; + } u; + struct { + u32 mfc_size_tag32; + u32 mfc_class_cmd32; + } by32; + u64 all64; +}; + +struct mfc_cq_sr { + u64 mfc_cq_data0_RW; + u64 mfc_cq_data1_RW; + u64 mfc_cq_data2_RW; + u64 mfc_cq_data3_RW; +}; + +struct spu_problem { +#define MS_SYNC_PENDING 1L + u64 spc_mssync_RW; /* 0x0000 */ + u8 pad_0x0008_0x3000[0x3000 - 0x0008]; + + /* DMA Area */ + u8 pad_0x3000_0x3004[0x4]; /* 0x3000 */ + u32 mfc_lsa_W; /* 0x3004 */ + u64 mfc_ea_W; /* 0x3008 */ + union mfc_tag_size_class_cmd mfc_union_W; /* 0x3010 */ + u8 pad_0x3018_0x3104[0xec]; /* 0x3018 */ + u32 dma_qstatus_R; /* 0x3104 */ + u8 pad_0x3108_0x3204[0xfc]; /* 0x3108 */ + u32 dma_querytype_RW; /* 0x3204 */ + u8 pad_0x3208_0x321c[0x14]; /* 0x3208 */ + u32 dma_querymask_RW; /* 0x321c */ + u8 pad_0x3220_0x322c[0xc]; /* 0x3220 */ + u32 dma_tagstatus_R; /* 0x322c */ +#define DMA_TAGSTATUS_INTR_ANY 1u +#define DMA_TAGSTATUS_INTR_ALL 2u + u8 pad_0x3230_0x4000[0x4000 - 0x3230]; /* 0x3230 */ + + /* SPU Control Area */ + u8 pad_0x4000_0x4004[0x4]; /* 0x4000 */ + u32 pu_mb_R; /* 0x4004 */ + u8 pad_0x4008_0x400c[0x4]; /* 0x4008 */ + u32 spu_mb_W; /* 0x400c */ + u8 pad_0x4010_0x4014[0x4]; /* 0x4010 */ + u32 mb_stat_R; /* 0x4014 */ + u8 pad_0x4018_0x401c[0x4]; /* 0x4018 */ + u32 spu_runcntl_RW; /* 0x401c */ +#define SPU_RUNCNTL_STOP 0L +#define SPU_RUNCNTL_RUNNABLE 1L +#define SPU_RUNCNTL_ISOLATE 2L + u8 pad_0x4020_0x4024[0x4]; /* 0x4020 */ + u32 spu_status_R; /* 0x4024 */ +#define SPU_STOP_STATUS_SHIFT 16 +#define SPU_STATUS_STOPPED 0x0 +#define SPU_STATUS_RUNNING 0x1 +#define SPU_STATUS_STOPPED_BY_STOP 0x2 +#define SPU_STATUS_STOPPED_BY_HALT 0x4 +#define SPU_STATUS_WAITING_FOR_CHANNEL 0x8 +#define SPU_STATUS_SINGLE_STEP 0x10 +#define SPU_STATUS_INVALID_INSTR 0x20 +#define SPU_STATUS_INVALID_CH 0x40 +#define SPU_STATUS_ISOLATED_STATE 0x80 +#define SPU_STATUS_ISOLATED_LOAD_STATUS 0x200 +#define SPU_STATUS_ISOLATED_EXIT_STATUS 0x400 + u8 pad_0x4028_0x402c[0x4]; /* 0x4028 */ + u32 spu_spe_R; /* 0x402c */ + u8 pad_0x4030_0x4034[0x4]; /* 0x4030 */ + u32 spu_npc_RW; /* 0x4034 */ + u8 pad_0x4038_0x14000[0x14000 - 0x4038]; /* 0x4038 */ + + /* Signal Notification Area */ + u8 pad_0x14000_0x1400c[0xc]; /* 0x14000 */ + u32 signal_notify1; /* 0x1400c */ + u8 pad_0x14010_0x1c00c[0x7ffc]; /* 0x14010 */ + u32 signal_notify2; /* 0x1c00c */ +} __attribute__ ((aligned(0x20000))); + +/* SPU Privilege 2 State Area */ +struct spu_priv2 { + /* MFC Registers */ + u8 pad_0x0000_0x1100[0x1100 - 0x0000]; /* 0x0000 */ + + /* SLB Management Registers */ + u8 pad_0x1100_0x1108[0x8]; /* 0x1100 */ + u64 slb_index_W; /* 0x1108 */ +#define SLB_INDEX_MASK 0x7L + u64 slb_esid_RW; /* 0x1110 */ + u64 slb_vsid_RW; /* 0x1118 */ +#define SLB_VSID_SUPERVISOR_STATE (0x1ull << 11) +#define SLB_VSID_SUPERVISOR_STATE_MASK (0x1ull << 11) +#define SLB_VSID_PROBLEM_STATE (0x1ull << 10) +#define SLB_VSID_PROBLEM_STATE_MASK (0x1ull << 10) +#define SLB_VSID_EXECUTE_SEGMENT (0x1ull << 9) +#define SLB_VSID_NO_EXECUTE_SEGMENT (0x1ull << 9) +#define SLB_VSID_EXECUTE_SEGMENT_MASK (0x1ull << 9) +#define SLB_VSID_4K_PAGE (0x0 << 8) +#define SLB_VSID_LARGE_PAGE (0x1ull << 8) +#define SLB_VSID_PAGE_SIZE_MASK (0x1ull << 8) +#define SLB_VSID_CLASS_MASK (0x1ull << 7) +#define SLB_VSID_VIRTUAL_PAGE_SIZE_MASK (0x1ull << 6) + u64 slb_invalidate_entry_W; /* 0x1120 */ + u64 slb_invalidate_all_W; /* 0x1128 */ + u8 pad_0x1130_0x2000[0x2000 - 0x1130]; /* 0x1130 */ + + /* Context Save / Restore Area */ + struct mfc_cq_sr spuq[16]; /* 0x2000 */ + struct mfc_cq_sr puq[8]; /* 0x2200 */ + u8 pad_0x2300_0x3000[0x3000 - 0x2300]; /* 0x2300 */ + + /* MFC Control */ + u64 mfc_control_RW; /* 0x3000 */ +#define MFC_CNTL_RESUME_DMA_QUEUE (0ull << 0) +#define MFC_CNTL_SUSPEND_DMA_QUEUE (1ull << 0) +#define MFC_CNTL_SUSPEND_DMA_QUEUE_MASK (1ull << 0) +#define MFC_CNTL_SUSPEND_MASK (1ull << 4) +#define MFC_CNTL_NORMAL_DMA_QUEUE_OPERATION (0ull << 8) +#define MFC_CNTL_SUSPEND_IN_PROGRESS (1ull << 8) +#define MFC_CNTL_SUSPEND_COMPLETE (3ull << 8) +#define MFC_CNTL_SUSPEND_DMA_STATUS_MASK (3ull << 8) +#define MFC_CNTL_DMA_QUEUES_EMPTY (1ull << 14) +#define MFC_CNTL_DMA_QUEUES_EMPTY_MASK (1ull << 14) +#define MFC_CNTL_PURGE_DMA_REQUEST (1ull << 15) +#define MFC_CNTL_PURGE_DMA_IN_PROGRESS (1ull << 24) +#define MFC_CNTL_PURGE_DMA_COMPLETE (3ull << 24) +#define MFC_CNTL_PURGE_DMA_STATUS_MASK (3ull << 24) +#define MFC_CNTL_RESTART_DMA_COMMAND (1ull << 32) +#define MFC_CNTL_DMA_COMMAND_REISSUE_PENDING (1ull << 32) +#define MFC_CNTL_DMA_COMMAND_REISSUE_STATUS_MASK (1ull << 32) +#define MFC_CNTL_MFC_PRIVILEGE_STATE (2ull << 33) +#define MFC_CNTL_MFC_PROBLEM_STATE (3ull << 33) +#define MFC_CNTL_MFC_KEY_PROTECTION_STATE_MASK (3ull << 33) +#define MFC_CNTL_DECREMENTER_HALTED (1ull << 35) +#define MFC_CNTL_DECREMENTER_RUNNING (1ull << 40) +#define MFC_CNTL_DECREMENTER_STATUS_MASK (1ull << 40) + u8 pad_0x3008_0x4000[0x4000 - 0x3008]; /* 0x3008 */ + + /* Interrupt Mailbox */ + u64 puint_mb_R; /* 0x4000 */ + u8 pad_0x4008_0x4040[0x4040 - 0x4008]; /* 0x4008 */ + + /* SPU Control */ + u64 spu_privcntl_RW; /* 0x4040 */ +#define SPU_PRIVCNTL_MODE_NORMAL (0x0ull << 0) +#define SPU_PRIVCNTL_MODE_SINGLE_STEP (0x1ull << 0) +#define SPU_PRIVCNTL_MODE_MASK (0x1ull << 0) +#define SPU_PRIVCNTL_NO_ATTENTION_EVENT (0x0ull << 1) +#define SPU_PRIVCNTL_ATTENTION_EVENT (0x1ull << 1) +#define SPU_PRIVCNTL_ATTENTION_EVENT_MASK (0x1ull << 1) +#define SPU_PRIVCNT_LOAD_REQUEST_NORMAL (0x0ull << 2) +#define SPU_PRIVCNT_LOAD_REQUEST_ENABLE_MASK (0x1ull << 2) + u8 pad_0x4048_0x4058[0x10]; /* 0x4048 */ + u64 spu_lslr_RW; /* 0x4058 */ + u64 spu_chnlcntptr_RW; /* 0x4060 */ + u64 spu_chnlcnt_RW; /* 0x4068 */ + u64 spu_chnldata_RW; /* 0x4070 */ + u64 spu_cfg_RW; /* 0x4078 */ + u8 pad_0x4080_0x5000[0x5000 - 0x4080]; /* 0x4080 */ + + /* PV2_ImplRegs: Implementation-specific privileged-state 2 regs */ + u64 spu_pm_trace_tag_status_RW; /* 0x5000 */ + u64 spu_tag_status_query_RW; /* 0x5008 */ +#define TAG_STATUS_QUERY_CONDITION_BITS (0x3ull << 32) +#define TAG_STATUS_QUERY_MASK_BITS (0xffffffffull) + u64 spu_cmd_buf1_RW; /* 0x5010 */ +#define SPU_COMMAND_BUFFER_1_LSA_BITS (0x7ffffull << 32) +#define SPU_COMMAND_BUFFER_1_EAH_BITS (0xffffffffull) + u64 spu_cmd_buf2_RW; /* 0x5018 */ +#define SPU_COMMAND_BUFFER_2_EAL_BITS ((0xffffffffull) << 32) +#define SPU_COMMAND_BUFFER_2_TS_BITS (0xffffull << 16) +#define SPU_COMMAND_BUFFER_2_TAG_BITS (0x3full) + u64 spu_atomic_status_RW; /* 0x5020 */ +} __attribute__ ((aligned(0x20000))); + +/* SPU Privilege 1 State Area */ +struct spu_priv1 { + /* Control and Configuration Area */ + u64 mfc_sr1_RW; /* 0x000 */ +#define MFC_STATE1_LOCAL_STORAGE_DECODE_MASK 0x01ull +#define MFC_STATE1_BUS_TLBIE_MASK 0x02ull +#define MFC_STATE1_REAL_MODE_OFFSET_ENABLE_MASK 0x04ull +#define MFC_STATE1_PROBLEM_STATE_MASK 0x08ull +#define MFC_STATE1_RELOCATE_MASK 0x10ull +#define MFC_STATE1_MASTER_RUN_CONTROL_MASK 0x20ull +#define MFC_STATE1_TABLE_SEARCH_MASK 0x40ull + u64 mfc_lpid_RW; /* 0x008 */ + u64 spu_idr_RW; /* 0x010 */ + u64 mfc_vr_RO; /* 0x018 */ +#define MFC_VERSION_BITS (0xffff << 16) +#define MFC_REVISION_BITS (0xffff) +#define MFC_GET_VERSION_BITS(vr) (((vr) & MFC_VERSION_BITS) >> 16) +#define MFC_GET_REVISION_BITS(vr) ((vr) & MFC_REVISION_BITS) + u64 spu_vr_RO; /* 0x020 */ +#define SPU_VERSION_BITS (0xffff << 16) +#define SPU_REVISION_BITS (0xffff) +#define SPU_GET_VERSION_BITS(vr) (vr & SPU_VERSION_BITS) >> 16 +#define SPU_GET_REVISION_BITS(vr) (vr & SPU_REVISION_BITS) + u8 pad_0x28_0x100[0x100 - 0x28]; /* 0x28 */ + + /* Interrupt Area */ + u64 int_mask_RW[3]; /* 0x100 */ +#define CLASS0_ENABLE_DMA_ALIGNMENT_INTR 0x1L +#define CLASS0_ENABLE_INVALID_DMA_COMMAND_INTR 0x2L +#define CLASS0_ENABLE_SPU_ERROR_INTR 0x4L +#define CLASS0_ENABLE_MFC_FIR_INTR 0x8L +#define CLASS1_ENABLE_SEGMENT_FAULT_INTR 0x1L +#define CLASS1_ENABLE_STORAGE_FAULT_INTR 0x2L +#define CLASS1_ENABLE_LS_COMPARE_SUSPEND_ON_GET_INTR 0x4L +#define CLASS1_ENABLE_LS_COMPARE_SUSPEND_ON_PUT_INTR 0x8L +#define CLASS2_ENABLE_MAILBOX_INTR 0x1L +#define CLASS2_ENABLE_SPU_STOP_INTR 0x2L +#define CLASS2_ENABLE_SPU_HALT_INTR 0x4L +#define CLASS2_ENABLE_SPU_DMA_TAG_GROUP_COMPLETE_INTR 0x8L +#define CLASS2_ENABLE_MAILBOX_THRESHOLD_INTR 0x10L + u8 pad_0x118_0x140[0x28]; /* 0x118 */ + u64 int_stat_RW[3]; /* 0x140 */ +#define CLASS0_DMA_ALIGNMENT_INTR 0x1L +#define CLASS0_INVALID_DMA_COMMAND_INTR 0x2L +#define CLASS0_SPU_ERROR_INTR 0x4L +#define CLASS0_INTR_MASK 0x7L +#define CLASS1_SEGMENT_FAULT_INTR 0x1L +#define CLASS1_STORAGE_FAULT_INTR 0x2L +#define CLASS1_LS_COMPARE_SUSPEND_ON_GET_INTR 0x4L +#define CLASS1_LS_COMPARE_SUSPEND_ON_PUT_INTR 0x8L +#define CLASS1_INTR_MASK 0xfL +#define CLASS2_MAILBOX_INTR 0x1L +#define CLASS2_SPU_STOP_INTR 0x2L +#define CLASS2_SPU_HALT_INTR 0x4L +#define CLASS2_SPU_DMA_TAG_GROUP_COMPLETE_INTR 0x8L +#define CLASS2_MAILBOX_THRESHOLD_INTR 0x10L +#define CLASS2_INTR_MASK 0x1fL + u8 pad_0x158_0x180[0x28]; /* 0x158 */ + u64 int_route_RW; /* 0x180 */ + + /* Interrupt Routing */ + u8 pad_0x188_0x200[0x200 - 0x188]; /* 0x188 */ + + /* Atomic Unit Control Area */ + u64 mfc_atomic_flush_RW; /* 0x200 */ +#define mfc_atomic_flush_enable 0x1L + u8 pad_0x208_0x280[0x78]; /* 0x208 */ + u64 resource_allocation_groupID_RW; /* 0x280 */ + u64 resource_allocation_enable_RW; /* 0x288 */ + u8 pad_0x290_0x3c8[0x3c8 - 0x290]; /* 0x290 */ + + /* SPU_Cache_ImplRegs: Implementation-dependent cache registers */ + + u64 smf_sbi_signal_sel; /* 0x3c8 */ +#define smf_sbi_mask_lsb 56 +#define smf_sbi_shift (63 - smf_sbi_mask_lsb) +#define smf_sbi_mask (0x301LL << smf_sbi_shift) +#define smf_sbi_bus0_bits (0x001LL << smf_sbi_shift) +#define smf_sbi_bus2_bits (0x100LL << smf_sbi_shift) +#define smf_sbi2_bus0_bits (0x201LL << smf_sbi_shift) +#define smf_sbi2_bus2_bits (0x300LL << smf_sbi_shift) + u64 smf_ato_signal_sel; /* 0x3d0 */ +#define smf_ato_mask_lsb 35 +#define smf_ato_shift (63 - smf_ato_mask_lsb) +#define smf_ato_mask (0x3LL << smf_ato_shift) +#define smf_ato_bus0_bits (0x2LL << smf_ato_shift) +#define smf_ato_bus2_bits (0x1LL << smf_ato_shift) + u8 pad_0x3d8_0x400[0x400 - 0x3d8]; /* 0x3d8 */ + + /* TLB Management Registers */ + u64 mfc_sdr_RW; /* 0x400 */ + u8 pad_0x408_0x500[0xf8]; /* 0x408 */ + u64 tlb_index_hint_RO; /* 0x500 */ + u64 tlb_index_W; /* 0x508 */ + u64 tlb_vpn_RW; /* 0x510 */ + u64 tlb_rpn_RW; /* 0x518 */ + u8 pad_0x520_0x540[0x20]; /* 0x520 */ + u64 tlb_invalidate_entry_W; /* 0x540 */ + u64 tlb_invalidate_all_W; /* 0x548 */ + u8 pad_0x550_0x580[0x580 - 0x550]; /* 0x550 */ + + /* SPU_MMU_ImplRegs: Implementation-dependent MMU registers */ + u64 smm_hid; /* 0x580 */ +#define PAGE_SIZE_MASK 0xf000000000000000ull +#define PAGE_SIZE_16MB_64KB 0x2000000000000000ull + u8 pad_0x588_0x600[0x600 - 0x588]; /* 0x588 */ + + /* MFC Status/Control Area */ + u64 mfc_accr_RW; /* 0x600 */ +#define MFC_ACCR_EA_ACCESS_GET (1 << 0) +#define MFC_ACCR_EA_ACCESS_PUT (1 << 1) +#define MFC_ACCR_LS_ACCESS_GET (1 << 3) +#define MFC_ACCR_LS_ACCESS_PUT (1 << 4) + u8 pad_0x608_0x610[0x8]; /* 0x608 */ + u64 mfc_dsisr_RW; /* 0x610 */ +#define MFC_DSISR_PTE_NOT_FOUND (1 << 30) +#define MFC_DSISR_ACCESS_DENIED (1 << 27) +#define MFC_DSISR_ATOMIC (1 << 26) +#define MFC_DSISR_ACCESS_PUT (1 << 25) +#define MFC_DSISR_ADDR_MATCH (1 << 22) +#define MFC_DSISR_LS (1 << 17) +#define MFC_DSISR_L (1 << 16) +#define MFC_DSISR_ADDRESS_OVERFLOW (1 << 0) + u8 pad_0x618_0x620[0x8]; /* 0x618 */ + u64 mfc_dar_RW; /* 0x620 */ + u8 pad_0x628_0x700[0x700 - 0x628]; /* 0x628 */ + + /* Replacement Management Table (RMT) Area */ + u64 rmt_index_RW; /* 0x700 */ + u8 pad_0x708_0x710[0x8]; /* 0x708 */ + u64 rmt_data1_RW; /* 0x710 */ + u8 pad_0x718_0x800[0x800 - 0x718]; /* 0x718 */ + + /* Control/Configuration Registers */ + u64 mfc_dsir_R; /* 0x800 */ +#define MFC_DSIR_Q (1 << 31) +#define MFC_DSIR_SPU_QUEUE MFC_DSIR_Q + u64 mfc_lsacr_RW; /* 0x808 */ +#define MFC_LSACR_COMPARE_MASK ((~0ull) << 32) +#define MFC_LSACR_COMPARE_ADDR ((~0ull) >> 32) + u64 mfc_lscrr_R; /* 0x810 */ +#define MFC_LSCRR_Q (1 << 31) +#define MFC_LSCRR_SPU_QUEUE MFC_LSCRR_Q +#define MFC_LSCRR_QI_SHIFT 32 +#define MFC_LSCRR_QI_MASK ((~0ull) << MFC_LSCRR_QI_SHIFT) + u8 pad_0x818_0x820[0x8]; /* 0x818 */ + u64 mfc_tclass_id_RW; /* 0x820 */ +#define MFC_TCLASS_ID_ENABLE (1L << 0L) +#define MFC_TCLASS_SLOT2_ENABLE (1L << 5L) +#define MFC_TCLASS_SLOT1_ENABLE (1L << 6L) +#define MFC_TCLASS_SLOT0_ENABLE (1L << 7L) +#define MFC_TCLASS_QUOTA_2_SHIFT 8L +#define MFC_TCLASS_QUOTA_1_SHIFT 16L +#define MFC_TCLASS_QUOTA_0_SHIFT 24L +#define MFC_TCLASS_QUOTA_2_MASK (0x1FL << MFC_TCLASS_QUOTA_2_SHIFT) +#define MFC_TCLASS_QUOTA_1_MASK (0x1FL << MFC_TCLASS_QUOTA_1_SHIFT) +#define MFC_TCLASS_QUOTA_0_MASK (0x1FL << MFC_TCLASS_QUOTA_0_SHIFT) + u8 pad_0x828_0x900[0x900 - 0x828]; /* 0x828 */ + + /* Real Mode Support Registers */ + u64 mfc_rm_boundary; /* 0x900 */ + u8 pad_0x908_0x938[0x30]; /* 0x908 */ + u64 smf_dma_signal_sel; /* 0x938 */ +#define mfc_dma1_mask_lsb 41 +#define mfc_dma1_shift (63 - mfc_dma1_mask_lsb) +#define mfc_dma1_mask (0x3LL << mfc_dma1_shift) +#define mfc_dma1_bits (0x1LL << mfc_dma1_shift) +#define mfc_dma2_mask_lsb 43 +#define mfc_dma2_shift (63 - mfc_dma2_mask_lsb) +#define mfc_dma2_mask (0x3LL << mfc_dma2_shift) +#define mfc_dma2_bits (0x1LL << mfc_dma2_shift) + u8 pad_0x940_0xa38[0xf8]; /* 0x940 */ + u64 smm_signal_sel; /* 0xa38 */ +#define smm_sig_mask_lsb 12 +#define smm_sig_shift (63 - smm_sig_mask_lsb) +#define smm_sig_mask (0x3LL << smm_sig_shift) +#define smm_sig_bus0_bits (0x2LL << smm_sig_shift) +#define smm_sig_bus2_bits (0x1LL << smm_sig_shift) + u8 pad_0xa40_0xc00[0xc00 - 0xa40]; /* 0xa40 */ + + /* DMA Command Error Area */ + u64 mfc_cer_R; /* 0xc00 */ +#define MFC_CER_Q (1 << 31) +#define MFC_CER_SPU_QUEUE MFC_CER_Q + u8 pad_0xc08_0x1000[0x1000 - 0xc08]; /* 0xc08 */ + + /* PV1_ImplRegs: Implementation-dependent privileged-state 1 regs */ + /* DMA Command Error Area */ + u64 spu_ecc_cntl_RW; /* 0x1000 */ +#define SPU_ECC_CNTL_E (1ull << 0ull) +#define SPU_ECC_CNTL_ENABLE SPU_ECC_CNTL_E +#define SPU_ECC_CNTL_DISABLE (~SPU_ECC_CNTL_E & 1L) +#define SPU_ECC_CNTL_S (1ull << 1ull) +#define SPU_ECC_STOP_AFTER_ERROR SPU_ECC_CNTL_S +#define SPU_ECC_CONTINUE_AFTER_ERROR (~SPU_ECC_CNTL_S & 2L) +#define SPU_ECC_CNTL_B (1ull << 2ull) +#define SPU_ECC_BACKGROUND_ENABLE SPU_ECC_CNTL_B +#define SPU_ECC_BACKGROUND_DISABLE (~SPU_ECC_CNTL_B & 4L) +#define SPU_ECC_CNTL_I_SHIFT 3ull +#define SPU_ECC_CNTL_I_MASK (3ull << SPU_ECC_CNTL_I_SHIFT) +#define SPU_ECC_WRITE_ALWAYS (~SPU_ECC_CNTL_I & 12L) +#define SPU_ECC_WRITE_CORRECTABLE (1ull << SPU_ECC_CNTL_I_SHIFT) +#define SPU_ECC_WRITE_UNCORRECTABLE (3ull << SPU_ECC_CNTL_I_SHIFT) +#define SPU_ECC_CNTL_D (1ull << 5ull) +#define SPU_ECC_DETECTION_ENABLE SPU_ECC_CNTL_D +#define SPU_ECC_DETECTION_DISABLE (~SPU_ECC_CNTL_D & 32L) + u64 spu_ecc_stat_RW; /* 0x1008 */ +#define SPU_ECC_CORRECTED_ERROR (1ull << 0ul) +#define SPU_ECC_UNCORRECTED_ERROR (1ull << 1ul) +#define SPU_ECC_SCRUB_COMPLETE (1ull << 2ul) +#define SPU_ECC_SCRUB_IN_PROGRESS (1ull << 3ul) +#define SPU_ECC_INSTRUCTION_ERROR (1ull << 4ul) +#define SPU_ECC_DATA_ERROR (1ull << 5ul) +#define SPU_ECC_DMA_ERROR (1ull << 6ul) +#define SPU_ECC_STATUS_CNT_MASK (256ull << 8) + u64 spu_ecc_addr_RW; /* 0x1010 */ + u64 spu_err_mask_RW; /* 0x1018 */ +#define SPU_ERR_ILLEGAL_INSTR (1ull << 0ul) +#define SPU_ERR_ILLEGAL_CHANNEL (1ull << 1ul) + u8 pad_0x1020_0x1028[0x1028 - 0x1020]; /* 0x1020 */ + + /* SPU Debug-Trace Bus (DTB) Selection Registers */ + u64 spu_trig0_sel; /* 0x1028 */ + u64 spu_trig1_sel; /* 0x1030 */ + u64 spu_trig2_sel; /* 0x1038 */ + u64 spu_trig3_sel; /* 0x1040 */ + u64 spu_trace_sel; /* 0x1048 */ +#define spu_trace_sel_mask 0x1f1fLL +#define spu_trace_sel_bus0_bits 0x1000LL +#define spu_trace_sel_bus2_bits 0x0010LL + u64 spu_event0_sel; /* 0x1050 */ + u64 spu_event1_sel; /* 0x1058 */ + u64 spu_event2_sel; /* 0x1060 */ + u64 spu_event3_sel; /* 0x1068 */ + u64 spu_trace_cntl; /* 0x1070 */ +} __attribute__ ((aligned(0x2000))); + +#endif /* __KERNEL__ */ +#endif diff --git a/arch/powerpc/include/asm/spu_csa.h b/arch/powerpc/include/asm/spu_csa.h new file mode 100644 index 00000000000..a40fd491250 --- /dev/null +++ b/arch/powerpc/include/asm/spu_csa.h @@ -0,0 +1,266 @@ +/* + * spu_csa.h: Definitions for SPU context save area (CSA). + * + * (C) Copyright IBM 2005 + * + * Author: Mark Nutter + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _SPU_CSA_H_ +#define _SPU_CSA_H_ +#ifdef __KERNEL__ + +/* + * Total number of 128-bit registers. + */ +#define NR_SPU_GPRS 128 +#define NR_SPU_SPRS 9 +#define NR_SPU_REGS_PAD 7 +#define NR_SPU_SPILL_REGS 144 /* GPRS + SPRS + PAD */ +#define SIZEOF_SPU_SPILL_REGS NR_SPU_SPILL_REGS * 16 + +#define SPU_SAVE_COMPLETE 0x3FFB +#define SPU_RESTORE_COMPLETE 0x3FFC + +/* + * Definitions for various 'stopped' status conditions, + * to be recreated during context restore. + */ +#define SPU_STOPPED_STATUS_P 1 +#define SPU_STOPPED_STATUS_I 2 +#define SPU_STOPPED_STATUS_H 3 +#define SPU_STOPPED_STATUS_S 4 +#define SPU_STOPPED_STATUS_S_I 5 +#define SPU_STOPPED_STATUS_S_P 6 +#define SPU_STOPPED_STATUS_P_H 7 +#define SPU_STOPPED_STATUS_P_I 8 +#define SPU_STOPPED_STATUS_R 9 + +/* + * Definitions for software decrementer status flag. + */ +#define SPU_DECR_STATUS_RUNNING 0x1 +#define SPU_DECR_STATUS_WRAPPED 0x2 + +#ifndef __ASSEMBLY__ +/** + * spu_reg128 - generic 128-bit register definition. + */ +struct spu_reg128 { + u32 slot[4]; +}; + +/** + * struct spu_lscsa - Local Store Context Save Area. + * @gprs: Array of saved registers. + * @fpcr: Saved floating point status control register. + * @decr: Saved decrementer value. + * @decr_status: Indicates software decrementer status flags. + * @ppu_mb: Saved PPU mailbox data. + * @ppuint_mb: Saved PPU interrupting mailbox data. + * @tag_mask: Saved tag group mask. + * @event_mask: Saved event mask. + * @srr0: Saved SRR0. + * @stopped_status: Conditions to be recreated by restore. + * @ls: Saved contents of Local Storage Area. + * + * The LSCSA represents state that is primarily saved and + * restored by SPU-side code. + */ +struct spu_lscsa { + struct spu_reg128 gprs[128]; + struct spu_reg128 fpcr; + struct spu_reg128 decr; + struct spu_reg128 decr_status; + struct spu_reg128 ppu_mb; + struct spu_reg128 ppuint_mb; + struct spu_reg128 tag_mask; + struct spu_reg128 event_mask; + struct spu_reg128 srr0; + struct spu_reg128 stopped_status; + + /* + * 'ls' must be page-aligned on all configurations. + * Since we don't want to rely on having the spu-gcc + * installed to build the kernel and this structure + * is used in the SPU-side code, make it 64k-page + * aligned for now. + */ + unsigned char ls[LS_SIZE] __attribute__((aligned(65536))); +}; + +#ifndef __SPU__ +/* + * struct spu_problem_collapsed - condensed problem state area, w/o pads. + */ +struct spu_problem_collapsed { + u64 spc_mssync_RW; + u32 mfc_lsa_W; + u32 unused_pad0; + u64 mfc_ea_W; + union mfc_tag_size_class_cmd mfc_union_W; + u32 dma_qstatus_R; + u32 dma_querytype_RW; + u32 dma_querymask_RW; + u32 dma_tagstatus_R; + u32 pu_mb_R; + u32 spu_mb_W; + u32 mb_stat_R; + u32 spu_runcntl_RW; + u32 spu_status_R; + u32 spu_spc_R; + u32 spu_npc_RW; + u32 signal_notify1; + u32 signal_notify2; + u32 unused_pad1; +}; + +/* + * struct spu_priv1_collapsed - condensed privileged 1 area, w/o pads. + */ +struct spu_priv1_collapsed { + u64 mfc_sr1_RW; + u64 mfc_lpid_RW; + u64 spu_idr_RW; + u64 mfc_vr_RO; + u64 spu_vr_RO; + u64 int_mask_class0_RW; + u64 int_mask_class1_RW; + u64 int_mask_class2_RW; + u64 int_stat_class0_RW; + u64 int_stat_class1_RW; + u64 int_stat_class2_RW; + u64 int_route_RW; + u64 mfc_atomic_flush_RW; + u64 resource_allocation_groupID_RW; + u64 resource_allocation_enable_RW; + u64 mfc_fir_R; + u64 mfc_fir_status_or_W; + u64 mfc_fir_status_and_W; + u64 mfc_fir_mask_R; + u64 mfc_fir_mask_or_W; + u64 mfc_fir_mask_and_W; + u64 mfc_fir_chkstp_enable_RW; + u64 smf_sbi_signal_sel; + u64 smf_ato_signal_sel; + u64 tlb_index_hint_RO; + u64 tlb_index_W; + u64 tlb_vpn_RW; + u64 tlb_rpn_RW; + u64 tlb_invalidate_entry_W; + u64 tlb_invalidate_all_W; + u64 smm_hid; + u64 mfc_accr_RW; + u64 mfc_dsisr_RW; + u64 mfc_dar_RW; + u64 rmt_index_RW; + u64 rmt_data1_RW; + u64 mfc_dsir_R; + u64 mfc_lsacr_RW; + u64 mfc_lscrr_R; + u64 mfc_tclass_id_RW; + u64 mfc_rm_boundary; + u64 smf_dma_signal_sel; + u64 smm_signal_sel; + u64 mfc_cer_R; + u64 pu_ecc_cntl_RW; + u64 pu_ecc_stat_RW; + u64 spu_ecc_addr_RW; + u64 spu_err_mask_RW; + u64 spu_trig0_sel; + u64 spu_trig1_sel; + u64 spu_trig2_sel; + u64 spu_trig3_sel; + u64 spu_trace_sel; + u64 spu_event0_sel; + u64 spu_event1_sel; + u64 spu_event2_sel; + u64 spu_event3_sel; + u64 spu_trace_cntl; +}; + +/* + * struct spu_priv2_collapsed - condensed privileged 2 area, w/o pads. + */ +struct spu_priv2_collapsed { + u64 slb_index_W; + u64 slb_esid_RW; + u64 slb_vsid_RW; + u64 slb_invalidate_entry_W; + u64 slb_invalidate_all_W; + struct mfc_cq_sr spuq[16]; + struct mfc_cq_sr puq[8]; + u64 mfc_control_RW; + u64 puint_mb_R; + u64 spu_privcntl_RW; + u64 spu_lslr_RW; + u64 spu_chnlcntptr_RW; + u64 spu_chnlcnt_RW; + u64 spu_chnldata_RW; + u64 spu_cfg_RW; + u64 spu_tag_status_query_RW; + u64 spu_cmd_buf1_RW; + u64 spu_cmd_buf2_RW; + u64 spu_atomic_status_RW; +}; + +/** + * struct spu_state + * @lscsa: Local Store Context Save Area. + * @prob: Collapsed Problem State Area, w/o pads. + * @priv1: Collapsed Privileged 1 Area, w/o pads. + * @priv2: Collapsed Privileged 2 Area, w/o pads. + * @spu_chnlcnt_RW: Array of saved channel counts. + * @spu_chnldata_RW: Array of saved channel data. + * @suspend_time: Time stamp when decrementer disabled. + * + * Structure representing the whole of the SPU + * context save area (CSA). This struct contains + * all of the state necessary to suspend and then + * later optionally resume execution of an SPU + * context. + * + * The @lscsa region is by far the largest, and is + * allocated separately so that it may either be + * pinned or mapped to/from application memory, as + * appropriate for the OS environment. + */ +struct spu_state { + struct spu_lscsa *lscsa; +#ifdef CONFIG_SPU_FS_64K_LS + int use_big_pages; + /* One struct page per 64k page */ +#define SPU_LSCSA_NUM_BIG_PAGES (sizeof(struct spu_lscsa) / 0x10000) + struct page *lscsa_pages[SPU_LSCSA_NUM_BIG_PAGES]; +#endif + struct spu_problem_collapsed prob; + struct spu_priv1_collapsed priv1; + struct spu_priv2_collapsed priv2; + u64 spu_chnlcnt_RW[32]; + u64 spu_chnldata_RW[32]; + u32 spu_mailbox_data[4]; + u32 pu_mailbox_data[1]; + u64 class_0_dar, class_0_pending; + u64 class_1_dar, class_1_dsisr; + unsigned long suspend_time; + spinlock_t register_lock; +}; + +#endif /* !__SPU__ */ +#endif /* __KERNEL__ */ +#endif /* !__ASSEMBLY__ */ +#endif /* _SPU_CSA_H_ */ diff --git a/arch/powerpc/include/asm/spu_info.h b/arch/powerpc/include/asm/spu_info.h new file mode 100644 index 00000000000..3545efbf989 --- /dev/null +++ b/arch/powerpc/include/asm/spu_info.h @@ -0,0 +1,54 @@ +/* + * SPU info structures + * + * (C) Copyright 2006 IBM Corp. + * + * Author: Dwayne Grant McConnell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _SPU_INFO_H +#define _SPU_INFO_H + +#ifdef __KERNEL__ +#include +#include +#else +struct mfc_cq_sr { + __u64 mfc_cq_data0_RW; + __u64 mfc_cq_data1_RW; + __u64 mfc_cq_data2_RW; + __u64 mfc_cq_data3_RW; +}; +#endif /* __KERNEL__ */ + +struct spu_dma_info { + __u64 dma_info_type; + __u64 dma_info_mask; + __u64 dma_info_status; + __u64 dma_info_stall_and_notify; + __u64 dma_info_atomic_command_status; + struct mfc_cq_sr dma_info_command_data[16]; +}; + +struct spu_proxydma_info { + __u64 proxydma_info_type; + __u64 proxydma_info_mask; + __u64 proxydma_info_status; + struct mfc_cq_sr proxydma_info_command_data[8]; +}; + +#endif diff --git a/arch/powerpc/include/asm/spu_priv1.h b/arch/powerpc/include/asm/spu_priv1.h new file mode 100644 index 00000000000..25020a34ce7 --- /dev/null +++ b/arch/powerpc/include/asm/spu_priv1.h @@ -0,0 +1,236 @@ +/* + * Defines an spu hypervisor abstraction layer. + * + * Copyright 2006 Sony Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#if !defined(_SPU_PRIV1_H) +#define _SPU_PRIV1_H +#if defined(__KERNEL__) + +#include + +struct spu; +struct spu_context; + +/* access to priv1 registers */ + +struct spu_priv1_ops { + void (*int_mask_and) (struct spu *spu, int class, u64 mask); + void (*int_mask_or) (struct spu *spu, int class, u64 mask); + void (*int_mask_set) (struct spu *spu, int class, u64 mask); + u64 (*int_mask_get) (struct spu *spu, int class); + void (*int_stat_clear) (struct spu *spu, int class, u64 stat); + u64 (*int_stat_get) (struct spu *spu, int class); + void (*cpu_affinity_set) (struct spu *spu, int cpu); + u64 (*mfc_dar_get) (struct spu *spu); + u64 (*mfc_dsisr_get) (struct spu *spu); + void (*mfc_dsisr_set) (struct spu *spu, u64 dsisr); + void (*mfc_sdr_setup) (struct spu *spu); + void (*mfc_sr1_set) (struct spu *spu, u64 sr1); + u64 (*mfc_sr1_get) (struct spu *spu); + void (*mfc_tclass_id_set) (struct spu *spu, u64 tclass_id); + u64 (*mfc_tclass_id_get) (struct spu *spu); + void (*tlb_invalidate) (struct spu *spu); + void (*resource_allocation_groupID_set) (struct spu *spu, u64 id); + u64 (*resource_allocation_groupID_get) (struct spu *spu); + void (*resource_allocation_enable_set) (struct spu *spu, u64 enable); + u64 (*resource_allocation_enable_get) (struct spu *spu); +}; + +extern const struct spu_priv1_ops* spu_priv1_ops; + +static inline void +spu_int_mask_and (struct spu *spu, int class, u64 mask) +{ + spu_priv1_ops->int_mask_and(spu, class, mask); +} + +static inline void +spu_int_mask_or (struct spu *spu, int class, u64 mask) +{ + spu_priv1_ops->int_mask_or(spu, class, mask); +} + +static inline void +spu_int_mask_set (struct spu *spu, int class, u64 mask) +{ + spu_priv1_ops->int_mask_set(spu, class, mask); +} + +static inline u64 +spu_int_mask_get (struct spu *spu, int class) +{ + return spu_priv1_ops->int_mask_get(spu, class); +} + +static inline void +spu_int_stat_clear (struct spu *spu, int class, u64 stat) +{ + spu_priv1_ops->int_stat_clear(spu, class, stat); +} + +static inline u64 +spu_int_stat_get (struct spu *spu, int class) +{ + return spu_priv1_ops->int_stat_get (spu, class); +} + +static inline void +spu_cpu_affinity_set (struct spu *spu, int cpu) +{ + spu_priv1_ops->cpu_affinity_set(spu, cpu); +} + +static inline u64 +spu_mfc_dar_get (struct spu *spu) +{ + return spu_priv1_ops->mfc_dar_get(spu); +} + +static inline u64 +spu_mfc_dsisr_get (struct spu *spu) +{ + return spu_priv1_ops->mfc_dsisr_get(spu); +} + +static inline void +spu_mfc_dsisr_set (struct spu *spu, u64 dsisr) +{ + spu_priv1_ops->mfc_dsisr_set(spu, dsisr); +} + +static inline void +spu_mfc_sdr_setup (struct spu *spu) +{ + spu_priv1_ops->mfc_sdr_setup(spu); +} + +static inline void +spu_mfc_sr1_set (struct spu *spu, u64 sr1) +{ + spu_priv1_ops->mfc_sr1_set(spu, sr1); +} + +static inline u64 +spu_mfc_sr1_get (struct spu *spu) +{ + return spu_priv1_ops->mfc_sr1_get(spu); +} + +static inline void +spu_mfc_tclass_id_set (struct spu *spu, u64 tclass_id) +{ + spu_priv1_ops->mfc_tclass_id_set(spu, tclass_id); +} + +static inline u64 +spu_mfc_tclass_id_get (struct spu *spu) +{ + return spu_priv1_ops->mfc_tclass_id_get(spu); +} + +static inline void +spu_tlb_invalidate (struct spu *spu) +{ + spu_priv1_ops->tlb_invalidate(spu); +} + +static inline void +spu_resource_allocation_groupID_set (struct spu *spu, u64 id) +{ + spu_priv1_ops->resource_allocation_groupID_set(spu, id); +} + +static inline u64 +spu_resource_allocation_groupID_get (struct spu *spu) +{ + return spu_priv1_ops->resource_allocation_groupID_get(spu); +} + +static inline void +spu_resource_allocation_enable_set (struct spu *spu, u64 enable) +{ + spu_priv1_ops->resource_allocation_enable_set(spu, enable); +} + +static inline u64 +spu_resource_allocation_enable_get (struct spu *spu) +{ + return spu_priv1_ops->resource_allocation_enable_get(spu); +} + +/* spu management abstraction */ + +struct spu_management_ops { + int (*enumerate_spus)(int (*fn)(void *data)); + int (*create_spu)(struct spu *spu, void *data); + int (*destroy_spu)(struct spu *spu); + void (*enable_spu)(struct spu_context *ctx); + void (*disable_spu)(struct spu_context *ctx); + int (*init_affinity)(void); +}; + +extern const struct spu_management_ops* spu_management_ops; + +static inline int +spu_enumerate_spus (int (*fn)(void *data)) +{ + return spu_management_ops->enumerate_spus(fn); +} + +static inline int +spu_create_spu (struct spu *spu, void *data) +{ + return spu_management_ops->create_spu(spu, data); +} + +static inline int +spu_destroy_spu (struct spu *spu) +{ + return spu_management_ops->destroy_spu(spu); +} + +static inline int +spu_init_affinity (void) +{ + return spu_management_ops->init_affinity(); +} + +static inline void +spu_enable_spu (struct spu_context *ctx) +{ + spu_management_ops->enable_spu(ctx); +} + +static inline void +spu_disable_spu (struct spu_context *ctx) +{ + spu_management_ops->disable_spu(ctx); +} + +/* + * The declarations folowing are put here for convenience + * and only intended to be used by the platform setup code. + */ + +extern const struct spu_priv1_ops spu_priv1_mmio_ops; +extern const struct spu_priv1_ops spu_priv1_beat_ops; + +extern const struct spu_management_ops spu_management_of_ops; + +#endif /* __KERNEL__ */ +#endif diff --git a/arch/powerpc/include/asm/sstep.h b/arch/powerpc/include/asm/sstep.h new file mode 100644 index 00000000000..f593b0f9b62 --- /dev/null +++ b/arch/powerpc/include/asm/sstep.h @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2004 Paul Mackerras , IBM + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +struct pt_regs; + +/* + * We don't allow single-stepping an mtmsrd that would clear + * MSR_RI, since that would make the exception unrecoverable. + * Since we need to single-step to proceed from a breakpoint, + * we don't allow putting a breakpoint on an mtmsrd instruction. + * Similarly we don't allow breakpoints on rfid instructions. + * These macros tell us if an instruction is a mtmsrd or rfid. + * Note that IS_MTMSRD returns true for both an mtmsr (32-bit) + * and an mtmsrd (64-bit). + */ +#define IS_MTMSRD(instr) (((instr) & 0xfc0007be) == 0x7c000124) +#define IS_RFID(instr) (((instr) & 0xfc0007fe) == 0x4c000024) +#define IS_RFI(instr) (((instr) & 0xfc0007fe) == 0x4c000064) + +/* Emulate instructions that cause a transfer of control. */ +extern int emulate_step(struct pt_regs *regs, unsigned int instr); diff --git a/arch/powerpc/include/asm/stat.h b/arch/powerpc/include/asm/stat.h new file mode 100644 index 00000000000..e4edc510b53 --- /dev/null +++ b/arch/powerpc/include/asm/stat.h @@ -0,0 +1,81 @@ +#ifndef _ASM_POWERPC_STAT_H +#define _ASM_POWERPC_STAT_H +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include + +#define STAT_HAVE_NSEC 1 + +#ifndef __powerpc64__ +struct __old_kernel_stat { + unsigned short st_dev; + unsigned short st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned long st_size; + unsigned long st_atime; + unsigned long st_mtime; + unsigned long st_ctime; +}; +#endif /* !__powerpc64__ */ + +struct stat { + unsigned long st_dev; + ino_t st_ino; +#ifdef __powerpc64__ + nlink_t st_nlink; + mode_t st_mode; +#else + mode_t st_mode; + nlink_t st_nlink; +#endif + uid_t st_uid; + gid_t st_gid; + unsigned long st_rdev; + off_t st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long st_atime_nsec; + unsigned long st_mtime; + unsigned long st_mtime_nsec; + unsigned long st_ctime; + unsigned long st_ctime_nsec; + unsigned long __unused4; + unsigned long __unused5; +#ifdef __powerpc64__ + unsigned long __unused6; +#endif +}; + +/* This matches struct stat64 in glibc2.1. Only used for 32 bit. */ +struct stat64 { + unsigned long long st_dev; /* Device. */ + unsigned long long st_ino; /* File serial number. */ + unsigned int st_mode; /* File mode. */ + unsigned int st_nlink; /* Link count. */ + unsigned int st_uid; /* User ID of the file's owner. */ + unsigned int st_gid; /* Group ID of the file's group. */ + unsigned long long st_rdev; /* Device number, if device. */ + unsigned short __pad2; + long long st_size; /* Size of file, in bytes. */ + int st_blksize; /* Optimal block size for I/O. */ + long long st_blocks; /* Number 512-byte blocks allocated. */ + int st_atime; /* Time of last access. */ + unsigned int st_atime_nsec; + int st_mtime; /* Time of last modification. */ + unsigned int st_mtime_nsec; + int st_ctime; /* Time of last status change. */ + unsigned int st_ctime_nsec; + unsigned int __unused4; + unsigned int __unused5; +}; + +#endif /* _ASM_POWERPC_STAT_H */ diff --git a/arch/powerpc/include/asm/statfs.h b/arch/powerpc/include/asm/statfs.h new file mode 100644 index 00000000000..67024026c10 --- /dev/null +++ b/arch/powerpc/include/asm/statfs.h @@ -0,0 +1,60 @@ +#ifndef _ASM_POWERPC_STATFS_H +#define _ASM_POWERPC_STATFS_H + +/* For ppc32 we just use the generic definitions, not so simple on ppc64 */ + +#ifndef __powerpc64__ +#include +#else + +#ifndef __KERNEL_STRICT_NAMES +#include +typedef __kernel_fsid_t fsid_t; +#endif + +/* + * We're already 64-bit, so duplicate the definition + */ +struct statfs { + long f_type; + long f_bsize; + long f_blocks; + long f_bfree; + long f_bavail; + long f_files; + long f_ffree; + __kernel_fsid_t f_fsid; + long f_namelen; + long f_frsize; + long f_spare[5]; +}; + +struct statfs64 { + long f_type; + long f_bsize; + long f_blocks; + long f_bfree; + long f_bavail; + long f_files; + long f_ffree; + __kernel_fsid_t f_fsid; + long f_namelen; + long f_frsize; + long f_spare[5]; +}; + +struct compat_statfs64 { + __u32 f_type; + __u32 f_bsize; + __u64 f_blocks; + __u64 f_bfree; + __u64 f_bavail; + __u64 f_files; + __u64 f_ffree; + __kernel_fsid_t f_fsid; + __u32 f_namelen; + __u32 f_frsize; + __u32 f_spare[5]; +}; +#endif /* ! __powerpc64__ */ +#endif diff --git a/arch/powerpc/include/asm/string.h b/arch/powerpc/include/asm/string.h new file mode 100644 index 00000000000..e40010abcaf --- /dev/null +++ b/arch/powerpc/include/asm/string.h @@ -0,0 +1,32 @@ +#ifndef _ASM_POWERPC_STRING_H +#define _ASM_POWERPC_STRING_H + +#ifdef __KERNEL__ + +#define __HAVE_ARCH_STRCPY +#define __HAVE_ARCH_STRNCPY +#define __HAVE_ARCH_STRLEN +#define __HAVE_ARCH_STRCMP +#define __HAVE_ARCH_STRNCMP +#define __HAVE_ARCH_STRCAT +#define __HAVE_ARCH_MEMSET +#define __HAVE_ARCH_MEMCPY +#define __HAVE_ARCH_MEMMOVE +#define __HAVE_ARCH_MEMCMP +#define __HAVE_ARCH_MEMCHR + +extern char * strcpy(char *,const char *); +extern char * strncpy(char *,const char *, __kernel_size_t); +extern __kernel_size_t strlen(const char *); +extern int strcmp(const char *,const char *); +extern int strncmp(const char *, const char *, __kernel_size_t); +extern char * strcat(char *, const char *); +extern void * memset(void *,int,__kernel_size_t); +extern void * memcpy(void *,const void *,__kernel_size_t); +extern void * memmove(void *,const void *,__kernel_size_t); +extern int memcmp(const void *,const void *,__kernel_size_t); +extern void * memchr(const void *,int,__kernel_size_t); + +#endif /* __KERNEL__ */ + +#endif /* _ASM_POWERPC_STRING_H */ diff --git a/arch/powerpc/include/asm/suspend.h b/arch/powerpc/include/asm/suspend.h new file mode 100644 index 00000000000..cbf2c9404c3 --- /dev/null +++ b/arch/powerpc/include/asm/suspend.h @@ -0,0 +1,9 @@ +#ifndef __ASM_POWERPC_SUSPEND_H +#define __ASM_POWERPC_SUSPEND_H + +static inline int arch_prepare_suspend(void) { return 0; } + +void save_processor_state(void); +void restore_processor_state(void); + +#endif /* __ASM_POWERPC_SUSPEND_H */ diff --git a/arch/powerpc/include/asm/synch.h b/arch/powerpc/include/asm/synch.h new file mode 100644 index 00000000000..45963e80f55 --- /dev/null +++ b/arch/powerpc/include/asm/synch.h @@ -0,0 +1,44 @@ +#ifndef _ASM_POWERPC_SYNCH_H +#define _ASM_POWERPC_SYNCH_H +#ifdef __KERNEL__ + +#include +#include + +#ifndef __ASSEMBLY__ +extern unsigned int __start___lwsync_fixup, __stop___lwsync_fixup; +extern void do_lwsync_fixups(unsigned long value, void *fixup_start, + void *fixup_end); + +static inline void eieio(void) +{ + __asm__ __volatile__ ("eieio" : : : "memory"); +} + +static inline void isync(void) +{ + __asm__ __volatile__ ("isync" : : : "memory"); +} +#endif /* __ASSEMBLY__ */ + +#if defined(__powerpc64__) +# define LWSYNC lwsync +#elif defined(CONFIG_E500) +# define LWSYNC \ + START_LWSYNC_SECTION(96); \ + sync; \ + MAKE_LWSYNC_SECTION_ENTRY(96, __lwsync_fixup); +#else +# define LWSYNC sync +#endif + +#ifdef CONFIG_SMP +#define ISYNC_ON_SMP "\n\tisync\n" +#define LWSYNC_ON_SMP stringify_in_c(LWSYNC) "\n" +#else +#define ISYNC_ON_SMP +#define LWSYNC_ON_SMP +#endif + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_SYNCH_H */ diff --git a/arch/powerpc/include/asm/syscall.h b/arch/powerpc/include/asm/syscall.h new file mode 100644 index 00000000000..efa7f0b879f --- /dev/null +++ b/arch/powerpc/include/asm/syscall.h @@ -0,0 +1,84 @@ +/* + * Access to user system call parameters and results + * + * Copyright (C) 2008 Red Hat, Inc. All rights reserved. + * + * This copyrighted material is made available to anyone wishing to use, + * modify, copy, or redistribute it subject to the terms and conditions + * of the GNU General Public License v.2. + * + * See asm-generic/syscall.h for descriptions of what we must do here. + */ + +#ifndef _ASM_SYSCALL_H +#define _ASM_SYSCALL_H 1 + +#include + +static inline long syscall_get_nr(struct task_struct *task, + struct pt_regs *regs) +{ + return TRAP(regs) == 0xc00 ? regs->gpr[0] : -1L; +} + +static inline void syscall_rollback(struct task_struct *task, + struct pt_regs *regs) +{ + regs->gpr[3] = regs->orig_gpr3; +} + +static inline long syscall_get_error(struct task_struct *task, + struct pt_regs *regs) +{ + return (regs->ccr & 0x1000) ? -regs->gpr[3] : 0; +} + +static inline long syscall_get_return_value(struct task_struct *task, + struct pt_regs *regs) +{ + return regs->gpr[3]; +} + +static inline void syscall_set_return_value(struct task_struct *task, + struct pt_regs *regs, + int error, long val) +{ + if (error) { + regs->ccr |= 0x1000L; + regs->gpr[3] = -error; + } else { + regs->ccr &= ~0x1000L; + regs->gpr[3] = val; + } +} + +static inline void syscall_get_arguments(struct task_struct *task, + struct pt_regs *regs, + unsigned int i, unsigned int n, + unsigned long *args) +{ + BUG_ON(i + n > 6); +#ifdef CONFIG_PPC64 + if (test_tsk_thread_flag(task, TIF_32BIT)) { + /* + * Zero-extend 32-bit argument values. The high bits are + * garbage ignored by the actual syscall dispatch. + */ + while (n-- > 0) + args[n] = (u32) regs->gpr[3 + i + n]; + return; + } +#endif + memcpy(args, ®s->gpr[3 + i], n * sizeof(args[0])); +} + +static inline void syscall_set_arguments(struct task_struct *task, + struct pt_regs *regs, + unsigned int i, unsigned int n, + const unsigned long *args) +{ + BUG_ON(i + n > 6); + memcpy(®s->gpr[3 + i], args, n * sizeof(args[0])); +} + +#endif /* _ASM_SYSCALL_H */ diff --git a/arch/powerpc/include/asm/syscalls.h b/arch/powerpc/include/asm/syscalls.h new file mode 100644 index 00000000000..eb8eb400c66 --- /dev/null +++ b/arch/powerpc/include/asm/syscalls.h @@ -0,0 +1,52 @@ +#ifndef __ASM_POWERPC_SYSCALLS_H +#define __ASM_POWERPC_SYSCALLS_H +#ifdef __KERNEL__ + +#include +#include +#include +#include + +struct new_utsname; +struct pt_regs; +struct rtas_args; +struct sigaction; + +asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len, + unsigned long prot, unsigned long flags, + unsigned long fd, off_t offset); +asmlinkage unsigned long sys_mmap2(unsigned long addr, size_t len, + unsigned long prot, unsigned long flags, + unsigned long fd, unsigned long pgoff); +asmlinkage int sys_execve(unsigned long a0, unsigned long a1, + unsigned long a2, unsigned long a3, unsigned long a4, + unsigned long a5, struct pt_regs *regs); +asmlinkage int sys_clone(unsigned long clone_flags, unsigned long usp, + int __user *parent_tidp, void __user *child_threadptr, + int __user *child_tidp, int p6, struct pt_regs *regs); +asmlinkage int sys_fork(unsigned long p1, unsigned long p2, + unsigned long p3, unsigned long p4, unsigned long p5, + unsigned long p6, struct pt_regs *regs); +asmlinkage int sys_vfork(unsigned long p1, unsigned long p2, + unsigned long p3, unsigned long p4, unsigned long p5, + unsigned long p6, struct pt_regs *regs); +asmlinkage long sys_pipe(int __user *fildes); +asmlinkage long sys_pipe2(int __user *fildes, int flags); +asmlinkage long sys_rt_sigaction(int sig, + const struct sigaction __user *act, + struct sigaction __user *oact, size_t sigsetsize); +asmlinkage int sys_ipc(uint call, int first, unsigned long second, + long third, void __user *ptr, long fifth); +asmlinkage long ppc64_personality(unsigned long personality); +asmlinkage int ppc_rtas(struct rtas_args __user *uargs); +asmlinkage time_t sys64_time(time_t __user * tloc); +asmlinkage long ppc_newuname(struct new_utsname __user * name); + +asmlinkage long sys_rt_sigsuspend(sigset_t __user *unewset, + size_t sigsetsize); +asmlinkage long sys_sigaltstack(const stack_t __user *uss, + stack_t __user *uoss, unsigned long r5, unsigned long r6, + unsigned long r7, unsigned long r8, struct pt_regs *regs); + +#endif /* __KERNEL__ */ +#endif /* __ASM_POWERPC_SYSCALLS_H */ diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h new file mode 100644 index 00000000000..e084272ed1c --- /dev/null +++ b/arch/powerpc/include/asm/systbl.h @@ -0,0 +1,324 @@ +/* + * List of powerpc syscalls. For the meaning of the _SPU suffix see + * arch/powerpc/platforms/cell/spu_callbacks.c + */ + +SYSCALL(restart_syscall) +SYSCALL(exit) +PPC_SYS(fork) +SYSCALL_SPU(read) +SYSCALL_SPU(write) +COMPAT_SYS_SPU(open) +SYSCALL_SPU(close) +COMPAT_SYS_SPU(waitpid) +COMPAT_SYS_SPU(creat) +SYSCALL_SPU(link) +SYSCALL_SPU(unlink) +COMPAT_SYS(execve) +SYSCALL_SPU(chdir) +COMPAT_SYS_SPU(time) +SYSCALL_SPU(mknod) +SYSCALL_SPU(chmod) +SYSCALL_SPU(lchown) +SYSCALL(ni_syscall) +OLDSYS(stat) +SYSX_SPU(sys_lseek,ppc32_lseek,sys_lseek) +SYSCALL_SPU(getpid) +COMPAT_SYS(mount) +SYSX(sys_ni_syscall,sys_oldumount,sys_oldumount) +SYSCALL_SPU(setuid) +SYSCALL_SPU(getuid) +COMPAT_SYS_SPU(stime) +COMPAT_SYS(ptrace) +SYSCALL_SPU(alarm) +OLDSYS(fstat) +COMPAT_SYS(pause) +COMPAT_SYS(utime) +SYSCALL(ni_syscall) +SYSCALL(ni_syscall) +COMPAT_SYS_SPU(access) +COMPAT_SYS_SPU(nice) +SYSCALL(ni_syscall) +SYSCALL_SPU(sync) +COMPAT_SYS_SPU(kill) +SYSCALL_SPU(rename) +COMPAT_SYS_SPU(mkdir) +SYSCALL_SPU(rmdir) +SYSCALL_SPU(dup) +SYSCALL_SPU(pipe) +COMPAT_SYS_SPU(times) +SYSCALL(ni_syscall) +SYSCALL_SPU(brk) +SYSCALL_SPU(setgid) +SYSCALL_SPU(getgid) +SYSCALL(signal) +SYSCALL_SPU(geteuid) +SYSCALL_SPU(getegid) +SYSCALL(acct) +SYSCALL(umount) +SYSCALL(ni_syscall) +COMPAT_SYS_SPU(ioctl) +COMPAT_SYS_SPU(fcntl) +SYSCALL(ni_syscall) +COMPAT_SYS_SPU(setpgid) +SYSCALL(ni_syscall) +SYSX(sys_ni_syscall,sys_olduname, sys_olduname) +COMPAT_SYS_SPU(umask) +SYSCALL_SPU(chroot) +SYSCALL(ustat) +SYSCALL_SPU(dup2) +SYSCALL_SPU(getppid) +SYSCALL_SPU(getpgrp) +SYSCALL_SPU(setsid) +SYS32ONLY(sigaction) +SYSCALL_SPU(sgetmask) +COMPAT_SYS_SPU(ssetmask) +SYSCALL_SPU(setreuid) +SYSCALL_SPU(setregid) +SYS32ONLY(sigsuspend) +COMPAT_SYS(sigpending) +COMPAT_SYS_SPU(sethostname) +COMPAT_SYS_SPU(setrlimit) +COMPAT_SYS(old_getrlimit) +COMPAT_SYS_SPU(getrusage) +COMPAT_SYS_SPU(gettimeofday) +COMPAT_SYS_SPU(settimeofday) +COMPAT_SYS_SPU(getgroups) +COMPAT_SYS_SPU(setgroups) +SYSX(sys_ni_syscall,sys_ni_syscall,ppc_select) +SYSCALL_SPU(symlink) +OLDSYS(lstat) +COMPAT_SYS_SPU(readlink) +SYSCALL(uselib) +SYSCALL(swapon) +SYSCALL(reboot) +SYSX(sys_ni_syscall,old32_readdir,old_readdir) +SYSCALL_SPU(mmap) +SYSCALL_SPU(munmap) +SYSCALL_SPU(truncate) +SYSCALL_SPU(ftruncate) +SYSCALL_SPU(fchmod) +SYSCALL_SPU(fchown) +COMPAT_SYS_SPU(getpriority) +COMPAT_SYS_SPU(setpriority) +SYSCALL(ni_syscall) +COMPAT_SYS(statfs) +COMPAT_SYS(fstatfs) +SYSCALL(ni_syscall) +COMPAT_SYS_SPU(socketcall) +COMPAT_SYS_SPU(syslog) +COMPAT_SYS_SPU(setitimer) +COMPAT_SYS_SPU(getitimer) +COMPAT_SYS_SPU(newstat) +COMPAT_SYS_SPU(newlstat) +COMPAT_SYS_SPU(newfstat) +SYSX(sys_ni_syscall,sys_uname,sys_uname) +SYSCALL(ni_syscall) +SYSCALL_SPU(vhangup) +SYSCALL(ni_syscall) +SYSCALL(ni_syscall) +COMPAT_SYS_SPU(wait4) +SYSCALL(swapoff) +COMPAT_SYS_SPU(sysinfo) +COMPAT_SYS(ipc) +SYSCALL_SPU(fsync) +SYS32ONLY(sigreturn) +PPC_SYS(clone) +COMPAT_SYS_SPU(setdomainname) +PPC_SYS_SPU(newuname) +SYSCALL(ni_syscall) +COMPAT_SYS_SPU(adjtimex) +SYSCALL_SPU(mprotect) +SYSX(sys_ni_syscall,compat_sys_sigprocmask,sys_sigprocmask) +SYSCALL(ni_syscall) +SYSCALL(init_module) +SYSCALL(delete_module) +SYSCALL(ni_syscall) +SYSCALL(quotactl) +COMPAT_SYS_SPU(getpgid) +SYSCALL_SPU(fchdir) +SYSCALL_SPU(bdflush) +COMPAT_SYS(sysfs) +SYSX_SPU(ppc64_personality,ppc64_personality,sys_personality) +SYSCALL(ni_syscall) +SYSCALL_SPU(setfsuid) +SYSCALL_SPU(setfsgid) +SYSCALL_SPU(llseek) +COMPAT_SYS_SPU(getdents) +SYSX_SPU(sys_select,ppc32_select,ppc_select) +SYSCALL_SPU(flock) +SYSCALL_SPU(msync) +COMPAT_SYS_SPU(readv) +COMPAT_SYS_SPU(writev) +COMPAT_SYS_SPU(getsid) +SYSCALL_SPU(fdatasync) +COMPAT_SYS(sysctl) +SYSCALL_SPU(mlock) +SYSCALL_SPU(munlock) +SYSCALL_SPU(mlockall) +SYSCALL_SPU(munlockall) +COMPAT_SYS_SPU(sched_setparam) +COMPAT_SYS_SPU(sched_getparam) +COMPAT_SYS_SPU(sched_setscheduler) +COMPAT_SYS_SPU(sched_getscheduler) +SYSCALL_SPU(sched_yield) +COMPAT_SYS_SPU(sched_get_priority_max) +COMPAT_SYS_SPU(sched_get_priority_min) +COMPAT_SYS_SPU(sched_rr_get_interval) +COMPAT_SYS_SPU(nanosleep) +SYSCALL_SPU(mremap) +SYSCALL_SPU(setresuid) +SYSCALL_SPU(getresuid) +SYSCALL(ni_syscall) +SYSCALL_SPU(poll) +COMPAT_SYS(nfsservctl) +SYSCALL_SPU(setresgid) +SYSCALL_SPU(getresgid) +COMPAT_SYS_SPU(prctl) +COMPAT_SYS(rt_sigreturn) +COMPAT_SYS(rt_sigaction) +COMPAT_SYS(rt_sigprocmask) +COMPAT_SYS(rt_sigpending) +COMPAT_SYS(rt_sigtimedwait) +COMPAT_SYS(rt_sigqueueinfo) +COMPAT_SYS(rt_sigsuspend) +COMPAT_SYS_SPU(pread64) +COMPAT_SYS_SPU(pwrite64) +SYSCALL_SPU(chown) +SYSCALL_SPU(getcwd) +SYSCALL_SPU(capget) +SYSCALL_SPU(capset) +COMPAT_SYS(sigaltstack) +SYSX_SPU(sys_sendfile64,compat_sys_sendfile,sys_sendfile) +SYSCALL(ni_syscall) +SYSCALL(ni_syscall) +PPC_SYS(vfork) +COMPAT_SYS_SPU(getrlimit) +COMPAT_SYS_SPU(readahead) +SYS32ONLY(mmap2) +SYS32ONLY(truncate64) +SYS32ONLY(ftruncate64) +SYSX(sys_ni_syscall,sys_stat64,sys_stat64) +SYSX(sys_ni_syscall,sys_lstat64,sys_lstat64) +SYSX(sys_ni_syscall,sys_fstat64,sys_fstat64) +SYSCALL(pciconfig_read) +SYSCALL(pciconfig_write) +SYSCALL(pciconfig_iobase) +SYSCALL(ni_syscall) +SYSCALL_SPU(getdents64) +SYSCALL_SPU(pivot_root) +SYSX(sys_ni_syscall,compat_sys_fcntl64,sys_fcntl64) +SYSCALL_SPU(madvise) +SYSCALL_SPU(mincore) +SYSCALL_SPU(gettid) +SYSCALL_SPU(tkill) +SYSCALL_SPU(setxattr) +SYSCALL_SPU(lsetxattr) +SYSCALL_SPU(fsetxattr) +SYSCALL_SPU(getxattr) +SYSCALL_SPU(lgetxattr) +SYSCALL_SPU(fgetxattr) +SYSCALL_SPU(listxattr) +SYSCALL_SPU(llistxattr) +SYSCALL_SPU(flistxattr) +SYSCALL_SPU(removexattr) +SYSCALL_SPU(lremovexattr) +SYSCALL_SPU(fremovexattr) +COMPAT_SYS_SPU(futex) +COMPAT_SYS_SPU(sched_setaffinity) +COMPAT_SYS_SPU(sched_getaffinity) +SYSCALL(ni_syscall) +SYSCALL(ni_syscall) +SYS32ONLY(sendfile64) +COMPAT_SYS_SPU(io_setup) +SYSCALL_SPU(io_destroy) +COMPAT_SYS_SPU(io_getevents) +COMPAT_SYS_SPU(io_submit) +SYSCALL_SPU(io_cancel) +SYSCALL(set_tid_address) +SYSX_SPU(sys_fadvise64,ppc32_fadvise64,sys_fadvise64) +SYSCALL(exit_group) +SYSX(sys_lookup_dcookie,ppc32_lookup_dcookie,sys_lookup_dcookie) +SYSCALL_SPU(epoll_create) +SYSCALL_SPU(epoll_ctl) +SYSCALL_SPU(epoll_wait) +SYSCALL_SPU(remap_file_pages) +SYSX_SPU(sys_timer_create,compat_sys_timer_create,sys_timer_create) +COMPAT_SYS_SPU(timer_settime) +COMPAT_SYS_SPU(timer_gettime) +SYSCALL_SPU(timer_getoverrun) +SYSCALL_SPU(timer_delete) +COMPAT_SYS_SPU(clock_settime) +COMPAT_SYS_SPU(clock_gettime) +COMPAT_SYS_SPU(clock_getres) +COMPAT_SYS_SPU(clock_nanosleep) +SYSX(ppc64_swapcontext,ppc32_swapcontext,ppc_swapcontext) +COMPAT_SYS_SPU(tgkill) +COMPAT_SYS_SPU(utimes) +COMPAT_SYS_SPU(statfs64) +COMPAT_SYS_SPU(fstatfs64) +SYSX(sys_ni_syscall, ppc_fadvise64_64, ppc_fadvise64_64) +PPC_SYS_SPU(rtas) +OLDSYS(debug_setcontext) +SYSCALL(ni_syscall) +COMPAT_SYS(migrate_pages) +COMPAT_SYS(mbind) +COMPAT_SYS(get_mempolicy) +COMPAT_SYS(set_mempolicy) +COMPAT_SYS(mq_open) +SYSCALL(mq_unlink) +COMPAT_SYS(mq_timedsend) +COMPAT_SYS(mq_timedreceive) +COMPAT_SYS(mq_notify) +COMPAT_SYS(mq_getsetattr) +COMPAT_SYS(kexec_load) +COMPAT_SYS(add_key) +COMPAT_SYS(request_key) +COMPAT_SYS(keyctl) +COMPAT_SYS(waitid) +COMPAT_SYS(ioprio_set) +COMPAT_SYS(ioprio_get) +SYSCALL(inotify_init) +SYSCALL(inotify_add_watch) +SYSCALL(inotify_rm_watch) +SYSCALL(spu_run) +SYSCALL(spu_create) +COMPAT_SYS(pselect6) +COMPAT_SYS(ppoll) +SYSCALL_SPU(unshare) +SYSCALL_SPU(splice) +SYSCALL_SPU(tee) +COMPAT_SYS_SPU(vmsplice) +COMPAT_SYS_SPU(openat) +SYSCALL_SPU(mkdirat) +SYSCALL_SPU(mknodat) +SYSCALL_SPU(fchownat) +COMPAT_SYS_SPU(futimesat) +SYSX_SPU(sys_newfstatat, sys_fstatat64, sys_fstatat64) +SYSCALL_SPU(unlinkat) +SYSCALL_SPU(renameat) +SYSCALL_SPU(linkat) +SYSCALL_SPU(symlinkat) +SYSCALL_SPU(readlinkat) +SYSCALL_SPU(fchmodat) +SYSCALL_SPU(faccessat) +COMPAT_SYS_SPU(get_robust_list) +COMPAT_SYS_SPU(set_robust_list) +COMPAT_SYS_SPU(move_pages) +SYSCALL_SPU(getcpu) +COMPAT_SYS(epoll_pwait) +COMPAT_SYS_SPU(utimensat) +COMPAT_SYS_SPU(signalfd) +SYSCALL_SPU(timerfd_create) +SYSCALL_SPU(eventfd) +COMPAT_SYS_SPU(sync_file_range2) +COMPAT_SYS(fallocate) +SYSCALL(subpage_prot) +COMPAT_SYS_SPU(timerfd_settime) +COMPAT_SYS_SPU(timerfd_gettime) +COMPAT_SYS_SPU(signalfd4) +SYSCALL_SPU(eventfd2) +SYSCALL_SPU(epoll_create1) +SYSCALL_SPU(dup3) +SYSCALL_SPU(pipe2) +SYSCALL(inotify_init1) diff --git a/arch/powerpc/include/asm/system.h b/arch/powerpc/include/asm/system.h new file mode 100644 index 00000000000..d6648c14332 --- /dev/null +++ b/arch/powerpc/include/asm/system.h @@ -0,0 +1,548 @@ +/* + * Copyright (C) 1999 Cort Dougan + */ +#ifndef _ASM_POWERPC_SYSTEM_H +#define _ASM_POWERPC_SYSTEM_H + +#include +#include + +#include + +/* + * Memory barrier. + * The sync instruction guarantees that all memory accesses initiated + * by this processor have been performed (with respect to all other + * mechanisms that access memory). The eieio instruction is a barrier + * providing an ordering (separately) for (a) cacheable stores and (b) + * loads and stores to non-cacheable memory (e.g. I/O devices). + * + * mb() prevents loads and stores being reordered across this point. + * rmb() prevents loads being reordered across this point. + * wmb() prevents stores being reordered across this point. + * read_barrier_depends() prevents data-dependent loads being reordered + * across this point (nop on PPC). + * + * We have to use the sync instructions for mb(), since lwsync doesn't + * order loads with respect to previous stores. Lwsync is fine for + * rmb(), though. Note that rmb() actually uses a sync on 32-bit + * architectures. + * + * For wmb(), we use sync since wmb is used in drivers to order + * stores to system memory with respect to writes to the device. + * However, smp_wmb() can be a lighter-weight lwsync or eieio barrier + * on SMP since it is only used to order updates to system memory. + */ +#define mb() __asm__ __volatile__ ("sync" : : : "memory") +#define rmb() __asm__ __volatile__ ("sync" : : : "memory") +#define wmb() __asm__ __volatile__ ("sync" : : : "memory") +#define read_barrier_depends() do { } while(0) + +#define set_mb(var, value) do { var = value; mb(); } while (0) + +#ifdef __KERNEL__ +#define AT_VECTOR_SIZE_ARCH 6 /* entries in ARCH_DLINFO */ +#ifdef CONFIG_SMP + +#ifdef __SUBARCH_HAS_LWSYNC +# define SMPWMB lwsync +#else +# define SMPWMB eieio +#endif + +#define smp_mb() mb() +#define smp_rmb() rmb() +#define smp_wmb() __asm__ __volatile__ (__stringify(SMPWMB) : : :"memory") +#define smp_read_barrier_depends() read_barrier_depends() +#else +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#define smp_read_barrier_depends() do { } while(0) +#endif /* CONFIG_SMP */ + +/* + * This is a barrier which prevents following instructions from being + * started until the value of the argument x is known. For example, if + * x is a variable loaded from memory, this prevents following + * instructions from being executed until the load has been performed. + */ +#define data_barrier(x) \ + asm volatile("twi 0,%0,0; isync" : : "r" (x) : "memory"); + +struct task_struct; +struct pt_regs; + +#if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC) + +extern int (*__debugger)(struct pt_regs *regs); +extern int (*__debugger_ipi)(struct pt_regs *regs); +extern int (*__debugger_bpt)(struct pt_regs *regs); +extern int (*__debugger_sstep)(struct pt_regs *regs); +extern int (*__debugger_iabr_match)(struct pt_regs *regs); +extern int (*__debugger_dabr_match)(struct pt_regs *regs); +extern int (*__debugger_fault_handler)(struct pt_regs *regs); + +#define DEBUGGER_BOILERPLATE(__NAME) \ +static inline int __NAME(struct pt_regs *regs) \ +{ \ + if (unlikely(__ ## __NAME)) \ + return __ ## __NAME(regs); \ + return 0; \ +} + +DEBUGGER_BOILERPLATE(debugger) +DEBUGGER_BOILERPLATE(debugger_ipi) +DEBUGGER_BOILERPLATE(debugger_bpt) +DEBUGGER_BOILERPLATE(debugger_sstep) +DEBUGGER_BOILERPLATE(debugger_iabr_match) +DEBUGGER_BOILERPLATE(debugger_dabr_match) +DEBUGGER_BOILERPLATE(debugger_fault_handler) + +#else +static inline int debugger(struct pt_regs *regs) { return 0; } +static inline int debugger_ipi(struct pt_regs *regs) { return 0; } +static inline int debugger_bpt(struct pt_regs *regs) { return 0; } +static inline int debugger_sstep(struct pt_regs *regs) { return 0; } +static inline int debugger_iabr_match(struct pt_regs *regs) { return 0; } +static inline int debugger_dabr_match(struct pt_regs *regs) { return 0; } +static inline int debugger_fault_handler(struct pt_regs *regs) { return 0; } +#endif + +extern int set_dabr(unsigned long dabr); +extern void do_dabr(struct pt_regs *regs, unsigned long address, + unsigned long error_code); +extern void print_backtrace(unsigned long *); +extern void show_regs(struct pt_regs * regs); +extern void flush_instruction_cache(void); +extern void hard_reset_now(void); +extern void poweroff_now(void); + +#ifdef CONFIG_6xx +extern long _get_L2CR(void); +extern long _get_L3CR(void); +extern void _set_L2CR(unsigned long); +extern void _set_L3CR(unsigned long); +#else +#define _get_L2CR() 0L +#define _get_L3CR() 0L +#define _set_L2CR(val) do { } while(0) +#define _set_L3CR(val) do { } while(0) +#endif + +extern void via_cuda_init(void); +extern void read_rtc_time(void); +extern void pmac_find_display(void); +extern void giveup_fpu(struct task_struct *); +extern void disable_kernel_fp(void); +extern void enable_kernel_fp(void); +extern void flush_fp_to_thread(struct task_struct *); +extern void enable_kernel_altivec(void); +extern void giveup_altivec(struct task_struct *); +extern void load_up_altivec(struct task_struct *); +extern int emulate_altivec(struct pt_regs *); +extern void __giveup_vsx(struct task_struct *); +extern void giveup_vsx(struct task_struct *); +extern void enable_kernel_spe(void); +extern void giveup_spe(struct task_struct *); +extern void load_up_spe(struct task_struct *); +extern int fix_alignment(struct pt_regs *); +extern void cvt_fd(float *from, double *to, struct thread_struct *thread); +extern void cvt_df(double *from, float *to, struct thread_struct *thread); + +#ifndef CONFIG_SMP +extern void discard_lazy_cpu_state(void); +#else +static inline void discard_lazy_cpu_state(void) +{ +} +#endif + +#ifdef CONFIG_ALTIVEC +extern void flush_altivec_to_thread(struct task_struct *); +#else +static inline void flush_altivec_to_thread(struct task_struct *t) +{ +} +#endif + +#ifdef CONFIG_VSX +extern void flush_vsx_to_thread(struct task_struct *); +#else +static inline void flush_vsx_to_thread(struct task_struct *t) +{ +} +#endif + +#ifdef CONFIG_SPE +extern void flush_spe_to_thread(struct task_struct *); +#else +static inline void flush_spe_to_thread(struct task_struct *t) +{ +} +#endif + +extern int call_rtas(const char *, int, int, unsigned long *, ...); +extern void cacheable_memzero(void *p, unsigned int nb); +extern void *cacheable_memcpy(void *, const void *, unsigned int); +extern int do_page_fault(struct pt_regs *, unsigned long, unsigned long); +extern void bad_page_fault(struct pt_regs *, unsigned long, int); +extern int die(const char *, struct pt_regs *, long); +extern void _exception(int, struct pt_regs *, int, unsigned long); +extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val); + +#ifdef CONFIG_BOOKE_WDT +extern u32 booke_wdt_enabled; +extern u32 booke_wdt_period; +#endif /* CONFIG_BOOKE_WDT */ + +struct device_node; +extern void note_scsi_host(struct device_node *, void *); + +extern struct task_struct *__switch_to(struct task_struct *, + struct task_struct *); +#define switch_to(prev, next, last) ((last) = __switch_to((prev), (next))) + +struct thread_struct; +extern struct task_struct *_switch(struct thread_struct *prev, + struct thread_struct *next); + +extern unsigned int rtas_data; +extern int mem_init_done; /* set on boot once kmalloc can be called */ +extern int init_bootmem_done; /* set on !NUMA once bootmem is available */ +extern unsigned long memory_limit; +extern unsigned long klimit; + +extern void *alloc_maybe_bootmem(size_t size, gfp_t mask); +extern void *zalloc_maybe_bootmem(size_t size, gfp_t mask); + +extern int powersave_nap; /* set if nap mode can be used in idle loop */ + +/* + * Atomic exchange + * + * Changes the memory location '*ptr' to be val and returns + * the previous value stored there. + */ +static __always_inline unsigned long +__xchg_u32(volatile void *p, unsigned long val) +{ + unsigned long prev; + + __asm__ __volatile__( + LWSYNC_ON_SMP +"1: lwarx %0,0,%2 \n" + PPC405_ERR77(0,%2) +" stwcx. %3,0,%2 \n\ + bne- 1b" + ISYNC_ON_SMP + : "=&r" (prev), "+m" (*(volatile unsigned int *)p) + : "r" (p), "r" (val) + : "cc", "memory"); + + return prev; +} + +/* + * Atomic exchange + * + * Changes the memory location '*ptr' to be val and returns + * the previous value stored there. + */ +static __always_inline unsigned long +__xchg_u32_local(volatile void *p, unsigned long val) +{ + unsigned long prev; + + __asm__ __volatile__( +"1: lwarx %0,0,%2 \n" + PPC405_ERR77(0,%2) +" stwcx. %3,0,%2 \n\ + bne- 1b" + : "=&r" (prev), "+m" (*(volatile unsigned int *)p) + : "r" (p), "r" (val) + : "cc", "memory"); + + return prev; +} + +#ifdef CONFIG_PPC64 +static __always_inline unsigned long +__xchg_u64(volatile void *p, unsigned long val) +{ + unsigned long prev; + + __asm__ __volatile__( + LWSYNC_ON_SMP +"1: ldarx %0,0,%2 \n" + PPC405_ERR77(0,%2) +" stdcx. %3,0,%2 \n\ + bne- 1b" + ISYNC_ON_SMP + : "=&r" (prev), "+m" (*(volatile unsigned long *)p) + : "r" (p), "r" (val) + : "cc", "memory"); + + return prev; +} + +static __always_inline unsigned long +__xchg_u64_local(volatile void *p, unsigned long val) +{ + unsigned long prev; + + __asm__ __volatile__( +"1: ldarx %0,0,%2 \n" + PPC405_ERR77(0,%2) +" stdcx. %3,0,%2 \n\ + bne- 1b" + : "=&r" (prev), "+m" (*(volatile unsigned long *)p) + : "r" (p), "r" (val) + : "cc", "memory"); + + return prev; +} +#endif + +/* + * This function doesn't exist, so you'll get a linker error + * if something tries to do an invalid xchg(). + */ +extern void __xchg_called_with_bad_pointer(void); + +static __always_inline unsigned long +__xchg(volatile void *ptr, unsigned long x, unsigned int size) +{ + switch (size) { + case 4: + return __xchg_u32(ptr, x); +#ifdef CONFIG_PPC64 + case 8: + return __xchg_u64(ptr, x); +#endif + } + __xchg_called_with_bad_pointer(); + return x; +} + +static __always_inline unsigned long +__xchg_local(volatile void *ptr, unsigned long x, unsigned int size) +{ + switch (size) { + case 4: + return __xchg_u32_local(ptr, x); +#ifdef CONFIG_PPC64 + case 8: + return __xchg_u64_local(ptr, x); +#endif + } + __xchg_called_with_bad_pointer(); + return x; +} +#define xchg(ptr,x) \ + ({ \ + __typeof__(*(ptr)) _x_ = (x); \ + (__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_, sizeof(*(ptr))); \ + }) + +#define xchg_local(ptr,x) \ + ({ \ + __typeof__(*(ptr)) _x_ = (x); \ + (__typeof__(*(ptr))) __xchg_local((ptr), \ + (unsigned long)_x_, sizeof(*(ptr))); \ + }) + +/* + * Compare and exchange - if *p == old, set it to new, + * and return the old value of *p. + */ +#define __HAVE_ARCH_CMPXCHG 1 + +static __always_inline unsigned long +__cmpxchg_u32(volatile unsigned int *p, unsigned long old, unsigned long new) +{ + unsigned int prev; + + __asm__ __volatile__ ( + LWSYNC_ON_SMP +"1: lwarx %0,0,%2 # __cmpxchg_u32\n\ + cmpw 0,%0,%3\n\ + bne- 2f\n" + PPC405_ERR77(0,%2) +" stwcx. %4,0,%2\n\ + bne- 1b" + ISYNC_ON_SMP + "\n\ +2:" + : "=&r" (prev), "+m" (*p) + : "r" (p), "r" (old), "r" (new) + : "cc", "memory"); + + return prev; +} + +static __always_inline unsigned long +__cmpxchg_u32_local(volatile unsigned int *p, unsigned long old, + unsigned long new) +{ + unsigned int prev; + + __asm__ __volatile__ ( +"1: lwarx %0,0,%2 # __cmpxchg_u32\n\ + cmpw 0,%0,%3\n\ + bne- 2f\n" + PPC405_ERR77(0,%2) +" stwcx. %4,0,%2\n\ + bne- 1b" + "\n\ +2:" + : "=&r" (prev), "+m" (*p) + : "r" (p), "r" (old), "r" (new) + : "cc", "memory"); + + return prev; +} + +#ifdef CONFIG_PPC64 +static __always_inline unsigned long +__cmpxchg_u64(volatile unsigned long *p, unsigned long old, unsigned long new) +{ + unsigned long prev; + + __asm__ __volatile__ ( + LWSYNC_ON_SMP +"1: ldarx %0,0,%2 # __cmpxchg_u64\n\ + cmpd 0,%0,%3\n\ + bne- 2f\n\ + stdcx. %4,0,%2\n\ + bne- 1b" + ISYNC_ON_SMP + "\n\ +2:" + : "=&r" (prev), "+m" (*p) + : "r" (p), "r" (old), "r" (new) + : "cc", "memory"); + + return prev; +} + +static __always_inline unsigned long +__cmpxchg_u64_local(volatile unsigned long *p, unsigned long old, + unsigned long new) +{ + unsigned long prev; + + __asm__ __volatile__ ( +"1: ldarx %0,0,%2 # __cmpxchg_u64\n\ + cmpd 0,%0,%3\n\ + bne- 2f\n\ + stdcx. %4,0,%2\n\ + bne- 1b" + "\n\ +2:" + : "=&r" (prev), "+m" (*p) + : "r" (p), "r" (old), "r" (new) + : "cc", "memory"); + + return prev; +} +#endif + +/* This function doesn't exist, so you'll get a linker error + if something tries to do an invalid cmpxchg(). */ +extern void __cmpxchg_called_with_bad_pointer(void); + +static __always_inline unsigned long +__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, + unsigned int size) +{ + switch (size) { + case 4: + return __cmpxchg_u32(ptr, old, new); +#ifdef CONFIG_PPC64 + case 8: + return __cmpxchg_u64(ptr, old, new); +#endif + } + __cmpxchg_called_with_bad_pointer(); + return old; +} + +static __always_inline unsigned long +__cmpxchg_local(volatile void *ptr, unsigned long old, unsigned long new, + unsigned int size) +{ + switch (size) { + case 4: + return __cmpxchg_u32_local(ptr, old, new); +#ifdef CONFIG_PPC64 + case 8: + return __cmpxchg_u64_local(ptr, old, new); +#endif + } + __cmpxchg_called_with_bad_pointer(); + return old; +} + +#define cmpxchg(ptr, o, n) \ + ({ \ + __typeof__(*(ptr)) _o_ = (o); \ + __typeof__(*(ptr)) _n_ = (n); \ + (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \ + (unsigned long)_n_, sizeof(*(ptr))); \ + }) + + +#define cmpxchg_local(ptr, o, n) \ + ({ \ + __typeof__(*(ptr)) _o_ = (o); \ + __typeof__(*(ptr)) _n_ = (n); \ + (__typeof__(*(ptr))) __cmpxchg_local((ptr), (unsigned long)_o_, \ + (unsigned long)_n_, sizeof(*(ptr))); \ + }) + +#ifdef CONFIG_PPC64 +/* + * We handle most unaligned accesses in hardware. On the other hand + * unaligned DMA can be very expensive on some ppc64 IO chips (it does + * powers of 2 writes until it reaches sufficient alignment). + * + * Based on this we disable the IP header alignment in network drivers. + * We also modify NET_SKB_PAD to be a cacheline in size, thus maintaining + * cacheline alignment of buffers. + */ +#define NET_IP_ALIGN 0 +#define NET_SKB_PAD L1_CACHE_BYTES + +#define cmpxchg64(ptr, o, n) \ + ({ \ + BUILD_BUG_ON(sizeof(*(ptr)) != 8); \ + cmpxchg((ptr), (o), (n)); \ + }) +#define cmpxchg64_local(ptr, o, n) \ + ({ \ + BUILD_BUG_ON(sizeof(*(ptr)) != 8); \ + cmpxchg_local((ptr), (o), (n)); \ + }) +#else +#include +#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) +#endif + +#define arch_align_stack(x) (x) + +/* Used in very early kernel initialization. */ +extern unsigned long reloc_offset(void); +extern unsigned long add_reloc_offset(unsigned long); +extern void reloc_got2(unsigned long); + +#define PTRRELOC(x) ((typeof(x)) add_reloc_offset((unsigned long)(x))) + +#ifdef CONFIG_VIRT_CPU_ACCOUNTING +extern void account_system_vtime(struct task_struct *); +#endif + +extern struct dentry *powerpc_debugfs_root; + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_SYSTEM_H */ diff --git a/arch/powerpc/include/asm/tce.h b/arch/powerpc/include/asm/tce.h new file mode 100644 index 00000000000..f663634cccc --- /dev/null +++ b/arch/powerpc/include/asm/tce.h @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation + * Rewrite, cleanup: + * Copyright (C) 2004 Olof Johansson , IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ASM_POWERPC_TCE_H +#define _ASM_POWERPC_TCE_H +#ifdef __KERNEL__ + +#include + +/* + * Tces come in two formats, one for the virtual bus and a different + * format for PCI + */ +#define TCE_VB 0 +#define TCE_PCI 1 + +/* TCE page size is 4096 bytes (1 << 12) */ + +#define TCE_SHIFT 12 +#define TCE_PAGE_SIZE (1 << TCE_SHIFT) + +#define TCE_ENTRY_SIZE 8 /* each TCE is 64 bits */ + +#define TCE_RPN_MASK 0xfffffffffful /* 40-bit RPN (4K pages) */ +#define TCE_RPN_SHIFT 12 +#define TCE_VALID 0x800 /* TCE valid */ +#define TCE_ALLIO 0x400 /* TCE valid for all lpars */ +#define TCE_PCI_WRITE 0x2 /* write from PCI allowed */ +#define TCE_PCI_READ 0x1 /* read from PCI allowed */ +#define TCE_VB_WRITE 0x1 /* write from VB allowed */ + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_TCE_H */ diff --git a/arch/powerpc/include/asm/termbits.h b/arch/powerpc/include/asm/termbits.h new file mode 100644 index 00000000000..6698188ca55 --- /dev/null +++ b/arch/powerpc/include/asm/termbits.h @@ -0,0 +1,209 @@ +#ifndef _ASM_POWERPC_TERMBITS_H +#define _ASM_POWERPC_TERMBITS_H + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +typedef unsigned char cc_t; +typedef unsigned int speed_t; +typedef unsigned int tcflag_t; + +/* + * termios type and macro definitions. Be careful about adding stuff + * to this file since it's used in GNU libc and there are strict rules + * concerning namespace pollution. + */ + +#define NCCS 19 +struct termios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_cc[NCCS]; /* control characters */ + cc_t c_line; /* line discipline (== c_cc[19]) */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +/* For PowerPC the termios and ktermios are the same */ + +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_cc[NCCS]; /* control characters */ + cc_t c_line; /* line discipline (== c_cc[19]) */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +/* c_cc characters */ +#define VINTR 0 +#define VQUIT 1 +#define VERASE 2 +#define VKILL 3 +#define VEOF 4 +#define VMIN 5 +#define VEOL 6 +#define VTIME 7 +#define VEOL2 8 +#define VSWTC 9 +#define VWERASE 10 +#define VREPRINT 11 +#define VSUSP 12 +#define VSTART 13 +#define VSTOP 14 +#define VLNEXT 15 +#define VDISCARD 16 + +/* c_iflag bits */ +#define IGNBRK 0000001 +#define BRKINT 0000002 +#define IGNPAR 0000004 +#define PARMRK 0000010 +#define INPCK 0000020 +#define ISTRIP 0000040 +#define INLCR 0000100 +#define IGNCR 0000200 +#define ICRNL 0000400 +#define IXON 0001000 +#define IXOFF 0002000 +#define IXANY 0004000 +#define IUCLC 0010000 +#define IMAXBEL 0020000 +#define IUTF8 0040000 + +/* c_oflag bits */ +#define OPOST 0000001 +#define ONLCR 0000002 +#define OLCUC 0000004 + +#define OCRNL 0000010 +#define ONOCR 0000020 +#define ONLRET 0000040 + +#define OFILL 00000100 +#define OFDEL 00000200 +#define NLDLY 00001400 +#define NL0 00000000 +#define NL1 00000400 +#define NL2 00001000 +#define NL3 00001400 +#define TABDLY 00006000 +#define TAB0 00000000 +#define TAB1 00002000 +#define TAB2 00004000 +#define TAB3 00006000 +#define XTABS 00006000 /* required by POSIX to == TAB3 */ +#define CRDLY 00030000 +#define CR0 00000000 +#define CR1 00010000 +#define CR2 00020000 +#define CR3 00030000 +#define FFDLY 00040000 +#define FF0 00000000 +#define FF1 00040000 +#define BSDLY 00100000 +#define BS0 00000000 +#define BS1 00100000 +#define VTDLY 00200000 +#define VT0 00000000 +#define VT1 00200000 + +/* c_cflag bit meaning */ +#define CBAUD 0000377 +#define B0 0000000 /* hang up */ +#define B50 0000001 +#define B75 0000002 +#define B110 0000003 +#define B134 0000004 +#define B150 0000005 +#define B200 0000006 +#define B300 0000007 +#define B600 0000010 +#define B1200 0000011 +#define B1800 0000012 +#define B2400 0000013 +#define B4800 0000014 +#define B9600 0000015 +#define B19200 0000016 +#define B38400 0000017 +#define EXTA B19200 +#define EXTB B38400 +#define CBAUDEX 0000000 +#define B57600 00020 +#define B115200 00021 +#define B230400 00022 +#define B460800 00023 +#define B500000 00024 +#define B576000 00025 +#define B921600 00026 +#define B1000000 00027 +#define B1152000 00030 +#define B1500000 00031 +#define B2000000 00032 +#define B2500000 00033 +#define B3000000 00034 +#define B3500000 00035 +#define B4000000 00036 +#define BOTHER 00037 + +#define CIBAUD 077600000 +#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ + +#define CSIZE 00001400 +#define CS5 00000000 +#define CS6 00000400 +#define CS7 00001000 +#define CS8 00001400 + +#define CSTOPB 00002000 +#define CREAD 00004000 +#define PARENB 00010000 +#define PARODD 00020000 +#define HUPCL 00040000 + +#define CLOCAL 00100000 +#define CMSPAR 010000000000 /* mark or space (stick) parity */ +#define CRTSCTS 020000000000 /* flow control */ + +/* c_lflag bits */ +#define ISIG 0x00000080 +#define ICANON 0x00000100 +#define XCASE 0x00004000 +#define ECHO 0x00000008 +#define ECHOE 0x00000002 +#define ECHOK 0x00000004 +#define ECHONL 0x00000010 +#define NOFLSH 0x80000000 +#define TOSTOP 0x00400000 +#define ECHOCTL 0x00000040 +#define ECHOPRT 0x00000020 +#define ECHOKE 0x00000001 +#define FLUSHO 0x00800000 +#define PENDIN 0x20000000 +#define IEXTEN 0x00000400 + +/* Values for the ACTION argument to `tcflow'. */ +#define TCOOFF 0 +#define TCOON 1 +#define TCIOFF 2 +#define TCION 3 + +/* Values for the QUEUE_SELECTOR argument to `tcflush'. */ +#define TCIFLUSH 0 +#define TCOFLUSH 1 +#define TCIOFLUSH 2 + +/* Values for the OPTIONAL_ACTIONS argument to `tcsetattr'. */ +#define TCSANOW 0 +#define TCSADRAIN 1 +#define TCSAFLUSH 2 + +#endif /* _ASM_POWERPC_TERMBITS_H */ diff --git a/arch/powerpc/include/asm/termios.h b/arch/powerpc/include/asm/termios.h new file mode 100644 index 00000000000..2c14fea07c8 --- /dev/null +++ b/arch/powerpc/include/asm/termios.h @@ -0,0 +1,85 @@ +#ifndef _ASM_POWERPC_TERMIOS_H +#define _ASM_POWERPC_TERMIOS_H + +/* + * Liberally adapted from alpha/termios.h. In particular, the c_cc[] + * fields have been reordered so that termio & termios share the + * common subset in the same order (for brain dead programs that don't + * know or care about the differences). + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include + +struct sgttyb { + char sg_ispeed; + char sg_ospeed; + char sg_erase; + char sg_kill; + short sg_flags; +}; + +struct tchars { + char t_intrc; + char t_quitc; + char t_startc; + char t_stopc; + char t_eofc; + char t_brkc; +}; + +struct ltchars { + char t_suspc; + char t_dsuspc; + char t_rprntc; + char t_flushc; + char t_werasc; + char t_lnextc; +}; + +struct winsize { + unsigned short ws_row; + unsigned short ws_col; + unsigned short ws_xpixel; + unsigned short ws_ypixel; +}; + +#define NCC 10 +struct termio { + unsigned short c_iflag; /* input mode flags */ + unsigned short c_oflag; /* output mode flags */ + unsigned short c_cflag; /* control mode flags */ + unsigned short c_lflag; /* local mode flags */ + unsigned char c_line; /* line discipline */ + unsigned char c_cc[NCC]; /* control characters */ +}; + +/* c_cc characters */ +#define _VINTR 0 +#define _VQUIT 1 +#define _VERASE 2 +#define _VKILL 3 +#define _VEOF 4 +#define _VMIN 5 +#define _VEOL 6 +#define _VTIME 7 +#define _VEOL2 8 +#define _VSWTC 9 + +#ifdef __KERNEL__ +/* ^C ^\ del ^U ^D 1 0 0 0 0 ^W ^R ^Z ^Q ^S ^V ^U */ +#define INIT_C_CC "\003\034\177\025\004\001\000\000\000\000\027\022\032\021\023\026\025" +#endif + +#ifdef __KERNEL__ + +#include + +#endif /* __KERNEL__ */ + +#endif /* _ASM_POWERPC_TERMIOS_H */ diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h new file mode 100644 index 00000000000..9665a26a253 --- /dev/null +++ b/arch/powerpc/include/asm/thread_info.h @@ -0,0 +1,161 @@ +/* thread_info.h: PowerPC low-level thread information + * adapted from the i386 version by Paul Mackerras + * + * Copyright (C) 2002 David Howells (dhowells@redhat.com) + * - Incorporating suggestions made by Linus Torvalds and Dave Miller + */ + +#ifndef _ASM_POWERPC_THREAD_INFO_H +#define _ASM_POWERPC_THREAD_INFO_H + +#ifdef __KERNEL__ + +/* We have 8k stacks on ppc32 and 16k on ppc64 */ + +#ifdef CONFIG_PPC64 +#define THREAD_SHIFT 14 +#else +#define THREAD_SHIFT 13 +#endif + +#define THREAD_SIZE (1 << THREAD_SHIFT) + +#ifndef __ASSEMBLY__ +#include +#include +#include +#include + +/* + * low level task data. + */ +struct thread_info { + struct task_struct *task; /* main task structure */ + struct exec_domain *exec_domain; /* execution domain */ + int cpu; /* cpu we're on */ + int preempt_count; /* 0 => preemptable, + <0 => BUG */ + struct restart_block restart_block; + unsigned long local_flags; /* private flags for thread */ + + /* low level flags - has atomic operations done on it */ + unsigned long flags ____cacheline_aligned_in_smp; +}; + +/* + * macros/functions for gaining access to the thread information structure + * + * preempt_count needs to be 1 initially, until the scheduler is functional. + */ +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .cpu = 0, \ + .preempt_count = 1, \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ + .flags = 0, \ +} + +#define init_thread_info (init_thread_union.thread_info) +#define init_stack (init_thread_union.stack) + +/* thread information allocation */ + +#if THREAD_SHIFT >= PAGE_SHIFT + +#define THREAD_SIZE_ORDER (THREAD_SHIFT - PAGE_SHIFT) + +#else /* THREAD_SHIFT < PAGE_SHIFT */ + +#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR + +extern struct thread_info *alloc_thread_info(struct task_struct *tsk); +extern void free_thread_info(struct thread_info *ti); + +#endif /* THREAD_SHIFT < PAGE_SHIFT */ + +/* how to get the thread information struct from C */ +static inline struct thread_info *current_thread_info(void) +{ + register unsigned long sp asm("r1"); + + /* gcc4, at least, is smart enough to turn this into a single + * rlwinm for ppc32 and clrrdi for ppc64 */ + return (struct thread_info *)(sp & ~(THREAD_SIZE-1)); +} + +#endif /* __ASSEMBLY__ */ + +#define PREEMPT_ACTIVE 0x10000000 + +/* + * thread information flag bit numbers + */ +#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ +#define TIF_SIGPENDING 1 /* signal pending */ +#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ +#define TIF_POLLING_NRFLAG 3 /* true if poll_idle() is polling + TIF_NEED_RESCHED */ +#define TIF_32BIT 4 /* 32 bit binary */ +#define TIF_PERFMON_WORK 5 /* work for pfm_handle_work() */ +#define TIF_PERFMON_CTXSW 6 /* perfmon needs ctxsw calls */ +#define TIF_SYSCALL_AUDIT 7 /* syscall auditing active */ +#define TIF_SINGLESTEP 8 /* singlestepping active */ +#define TIF_MEMDIE 9 +#define TIF_SECCOMP 10 /* secure computing */ +#define TIF_RESTOREALL 11 /* Restore all regs (implies NOERROR) */ +#define TIF_NOERROR 12 /* Force successful syscall return */ +#define TIF_NOTIFY_RESUME 13 /* callback before returning to user */ +#define TIF_FREEZE 14 /* Freezing for suspend */ +#define TIF_RUNLATCH 15 /* Is the runlatch enabled? */ +#define TIF_ABI_PENDING 16 /* 32/64 bit switch needed */ + +/* as above, but as bit values */ +#define _TIF_SYSCALL_TRACE (1<local_flags |= _TLF_RESTORE_SIGMASK; + set_bit(TIF_SIGPENDING, &ti->flags); +} +#endif /* !__ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_POWERPC_THREAD_INFO_H */ diff --git a/arch/powerpc/include/asm/time.h b/arch/powerpc/include/asm/time.h new file mode 100644 index 00000000000..febd581ec9b --- /dev/null +++ b/arch/powerpc/include/asm/time.h @@ -0,0 +1,255 @@ +/* + * Common time prototypes and such for all ppc machines. + * + * Written by Cort Dougan (cort@cs.nmt.edu) to merge + * Paul Mackerras' version and mine for PReP and Pmac. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef __POWERPC_TIME_H +#define __POWERPC_TIME_H + +#ifdef __KERNEL__ +#include +#include + +#include +#ifdef CONFIG_PPC_ISERIES +#include +#include +#include +#endif + +/* time.c */ +extern unsigned long tb_ticks_per_jiffy; +extern unsigned long tb_ticks_per_usec; +extern unsigned long tb_ticks_per_sec; +extern u64 tb_to_xs; +extern unsigned tb_to_us; + +struct rtc_time; +extern void to_tm(int tim, struct rtc_time * tm); +extern void GregorianDay(struct rtc_time *tm); +extern time_t last_rtc_update; + +extern void generic_calibrate_decr(void); +extern void wakeup_decrementer(void); +extern void snapshot_timebase(void); + +extern void set_dec_cpu6(unsigned int val); + +/* Some sane defaults: 125 MHz timebase, 1GHz processor */ +extern unsigned long ppc_proc_freq; +#define DEFAULT_PROC_FREQ (DEFAULT_TB_FREQ * 8) +extern unsigned long ppc_tb_freq; +#define DEFAULT_TB_FREQ 125000000UL + +/* + * By putting all of this stuff into a single struct we + * reduce the number of cache lines touched by do_gettimeofday. + * Both by collecting all of the data in one cache line and + * by touching only one TOC entry on ppc64. + */ +struct gettimeofday_vars { + u64 tb_to_xs; + u64 stamp_xsec; + u64 tb_orig_stamp; +}; + +struct gettimeofday_struct { + unsigned long tb_ticks_per_sec; + struct gettimeofday_vars vars[2]; + struct gettimeofday_vars * volatile varp; + unsigned var_idx; + unsigned tb_to_us; +}; + +struct div_result { + u64 result_high; + u64 result_low; +}; + +/* Accessor functions for the timebase (RTC on 601) registers. */ +/* If one day CONFIG_POWER is added just define __USE_RTC as 1 */ +#ifdef CONFIG_6xx +#define __USE_RTC() (!cpu_has_feature(CPU_FTR_USE_TB)) +#else +#define __USE_RTC() 0 +#endif + +#ifdef CONFIG_PPC64 + +/* For compatibility, get_tbl() is defined as get_tb() on ppc64 */ +#define get_tbl get_tb + +#else + +static inline unsigned long get_tbl(void) +{ +#if defined(CONFIG_403GCX) + unsigned long tbl; + asm volatile("mfspr %0, 0x3dd" : "=r" (tbl)); + return tbl; +#else + return mftbl(); +#endif +} + +static inline unsigned int get_tbu(void) +{ +#ifdef CONFIG_403GCX + unsigned int tbu; + asm volatile("mfspr %0, 0x3dc" : "=r" (tbu)); + return tbu; +#else + return mftbu(); +#endif +} +#endif /* !CONFIG_PPC64 */ + +static inline unsigned int get_rtcl(void) +{ + unsigned int rtcl; + + asm volatile("mfrtcl %0" : "=r" (rtcl)); + return rtcl; +} + +static inline u64 get_rtc(void) +{ + unsigned int hi, lo, hi2; + + do { + asm volatile("mfrtcu %0; mfrtcl %1; mfrtcu %2" + : "=r" (hi), "=r" (lo), "=r" (hi2)); + } while (hi2 != hi); + return (u64)hi * 1000000000 + lo; +} + +#ifdef CONFIG_PPC64 +static inline u64 get_tb(void) +{ + return mftb(); +} +#else /* CONFIG_PPC64 */ +static inline u64 get_tb(void) +{ + unsigned int tbhi, tblo, tbhi2; + + do { + tbhi = get_tbu(); + tblo = get_tbl(); + tbhi2 = get_tbu(); + } while (tbhi != tbhi2); + + return ((u64)tbhi << 32) | tblo; +} +#endif /* !CONFIG_PPC64 */ + +static inline u64 get_tb_or_rtc(void) +{ + return __USE_RTC() ? get_rtc() : get_tb(); +} + +static inline void set_tb(unsigned int upper, unsigned int lower) +{ + mtspr(SPRN_TBWL, 0); + mtspr(SPRN_TBWU, upper); + mtspr(SPRN_TBWL, lower); +} + +/* Accessor functions for the decrementer register. + * The 4xx doesn't even have a decrementer. I tried to use the + * generic timer interrupt code, which seems OK, with the 4xx PIT + * in auto-reload mode. The problem is PIT stops counting when it + * hits zero. If it would wrap, we could use it just like a decrementer. + */ +static inline unsigned int get_dec(void) +{ +#if defined(CONFIG_40x) + return (mfspr(SPRN_PIT)); +#else + return (mfspr(SPRN_DEC)); +#endif +} + +/* + * Note: Book E and 4xx processors differ from other PowerPC processors + * in when the decrementer generates its interrupt: on the 1 to 0 + * transition for Book E/4xx, but on the 0 to -1 transition for others. + */ +static inline void set_dec(int val) +{ +#if defined(CONFIG_40x) + mtspr(SPRN_PIT, val); +#elif defined(CONFIG_8xx_CPU6) + set_dec_cpu6(val - 1); +#else +#ifndef CONFIG_BOOKE + --val; +#endif +#ifdef CONFIG_PPC_ISERIES + if (firmware_has_feature(FW_FEATURE_ISERIES) && + get_lppaca()->shared_proc) { + get_lppaca()->virtual_decr = val; + if (get_dec() > val) + HvCall_setVirtualDecr(); + return; + } +#endif + mtspr(SPRN_DEC, val); +#endif /* not 40x or 8xx_CPU6 */ +} + +static inline unsigned long tb_ticks_since(unsigned long tstamp) +{ + if (__USE_RTC()) { + int delta = get_rtcl() - (unsigned int) tstamp; + return delta < 0 ? delta + 1000000000 : delta; + } + return get_tbl() - tstamp; +} + +#define mulhwu(x,y) \ +({unsigned z; asm ("mulhwu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;}) + +#ifdef CONFIG_PPC64 +#define mulhdu(x,y) \ +({unsigned long z; asm ("mulhdu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;}) +#else +extern u64 mulhdu(u64, u64); +#endif + +extern void smp_space_timers(unsigned int); + +extern unsigned mulhwu_scale_factor(unsigned, unsigned); +extern void div128_by_32(u64 dividend_high, u64 dividend_low, + unsigned divisor, struct div_result *dr); + +/* Used to store Processor Utilization register (purr) values */ + +struct cpu_usage { + u64 current_tb; /* Holds the current purr register values */ +}; + +DECLARE_PER_CPU(struct cpu_usage, cpu_usage_array); + +#if defined(CONFIG_VIRT_CPU_ACCOUNTING) +extern void calculate_steal_time(void); +extern void snapshot_timebases(void); +#define account_process_vtime(tsk) account_process_tick(tsk, 0) +#else +#define calculate_steal_time() do { } while (0) +#define snapshot_timebases() do { } while (0) +#define account_process_vtime(tsk) do { } while (0) +#endif + +extern void secondary_cpu_time_init(void); +extern void iSeries_time_init_early(void); + +#endif /* __KERNEL__ */ +#endif /* __POWERPC_TIME_H */ diff --git a/arch/powerpc/include/asm/timex.h b/arch/powerpc/include/asm/timex.h new file mode 100644 index 00000000000..c55e14f7ef4 --- /dev/null +++ b/arch/powerpc/include/asm/timex.h @@ -0,0 +1,50 @@ +#ifndef _ASM_POWERPC_TIMEX_H +#define _ASM_POWERPC_TIMEX_H + +#ifdef __KERNEL__ + +/* + * PowerPC architecture timex specifications + */ + +#include +#include + +#define CLOCK_TICK_RATE 1024000 /* Underlying HZ */ + +typedef unsigned long cycles_t; + +static inline cycles_t get_cycles(void) +{ +#ifdef __powerpc64__ + return mftb(); +#else + cycles_t ret; + + /* + * For the "cycle" counter we use the timebase lower half. + * Currently only used on SMP. + */ + + ret = 0; + + __asm__ __volatile__( + "97: mftb %0\n" + "99:\n" + ".section __ftr_fixup,\"a\"\n" + ".align 2\n" + "98:\n" + " .long %1\n" + " .long 0\n" + " .long 97b-98b\n" + " .long 99b-98b\n" + " .long 0\n" + " .long 0\n" + ".previous" + : "=r" (ret) : "i" (CPU_FTR_601)); + return ret; +#endif +} + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_TIMEX_H */ diff --git a/arch/powerpc/include/asm/tlb.h b/arch/powerpc/include/asm/tlb.h new file mode 100644 index 00000000000..e20ff7541f3 --- /dev/null +++ b/arch/powerpc/include/asm/tlb.h @@ -0,0 +1,81 @@ +/* + * TLB shootdown specifics for powerpc + * + * Copyright (C) 2002 Anton Blanchard, IBM Corp. + * Copyright (C) 2002 Paul Mackerras, IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_POWERPC_TLB_H +#define _ASM_POWERPC_TLB_H +#ifdef __KERNEL__ + +#ifndef __powerpc64__ +#include +#endif +#include +#include +#ifndef __powerpc64__ +#include +#include +#endif + +#include + +struct mmu_gather; + +#define tlb_start_vma(tlb, vma) do { } while (0) +#define tlb_end_vma(tlb, vma) do { } while (0) + +#if !defined(CONFIG_PPC_STD_MMU) + +#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) + +#elif defined(__powerpc64__) + +extern void pte_free_finish(void); + +static inline void tlb_flush(struct mmu_gather *tlb) +{ + struct ppc64_tlb_batch *tlbbatch = &__get_cpu_var(ppc64_tlb_batch); + + /* If there's a TLB batch pending, then we must flush it because the + * pages are going to be freed and we really don't want to have a CPU + * access a freed page because it has a stale TLB + */ + if (tlbbatch->index) + __flush_tlb_pending(tlbbatch); + + pte_free_finish(); +} + +#else + +extern void tlb_flush(struct mmu_gather *tlb); + +#endif + +/* Get the generic bits... */ +#include + +#if !defined(CONFIG_PPC_STD_MMU) || defined(__powerpc64__) + +#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0) + +#else +extern void flush_hash_entry(struct mm_struct *mm, pte_t *ptep, + unsigned long address); + +static inline void __tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep, + unsigned long address) +{ + if (pte_val(*ptep) & _PAGE_HASHPTE) + flush_hash_entry(tlb->mm, ptep, address); +} + +#endif +#endif /* __KERNEL__ */ +#endif /* __ASM_POWERPC_TLB_H */ diff --git a/arch/powerpc/include/asm/tlbflush.h b/arch/powerpc/include/asm/tlbflush.h new file mode 100644 index 00000000000..361cd5c7a32 --- /dev/null +++ b/arch/powerpc/include/asm/tlbflush.h @@ -0,0 +1,166 @@ +#ifndef _ASM_POWERPC_TLBFLUSH_H +#define _ASM_POWERPC_TLBFLUSH_H + +/* + * TLB flushing: + * + * - flush_tlb_mm(mm) flushes the specified mm context TLB's + * - flush_tlb_page(vma, vmaddr) flushes one page + * - flush_tlb_page_nohash(vma, vmaddr) flushes one page if SW loaded TLB + * - flush_tlb_range(vma, start, end) flushes a range of pages + * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifdef __KERNEL__ + +#if defined(CONFIG_4xx) || defined(CONFIG_8xx) || defined(CONFIG_FSL_BOOKE) +/* + * TLB flushing for software loaded TLB chips + * + * TODO: (CONFIG_FSL_BOOKE) determine if flush_tlb_range & + * flush_tlb_kernel_range are best implemented as tlbia vs + * specific tlbie's + */ + +#include + +extern void _tlbie(unsigned long address, unsigned int pid); + +#if defined(CONFIG_40x) || defined(CONFIG_8xx) +#define _tlbia() asm volatile ("tlbia; sync" : : : "memory") +#else /* CONFIG_44x || CONFIG_FSL_BOOKE */ +extern void _tlbia(void); +#endif + +static inline void flush_tlb_mm(struct mm_struct *mm) +{ + _tlbia(); +} + +static inline void flush_tlb_page(struct vm_area_struct *vma, + unsigned long vmaddr) +{ + _tlbie(vmaddr, vma ? vma->vm_mm->context.id : 0); +} + +static inline void flush_tlb_page_nohash(struct vm_area_struct *vma, + unsigned long vmaddr) +{ + _tlbie(vmaddr, vma ? vma->vm_mm->context.id : 0); +} + +static inline void flush_tlb_range(struct vm_area_struct *vma, + unsigned long start, unsigned long end) +{ + _tlbia(); +} + +static inline void flush_tlb_kernel_range(unsigned long start, + unsigned long end) +{ + _tlbia(); +} + +#elif defined(CONFIG_PPC32) +/* + * TLB flushing for "classic" hash-MMMU 32-bit CPUs, 6xx, 7xx, 7xxx + */ +extern void _tlbie(unsigned long address); +extern void _tlbia(void); + +extern void flush_tlb_mm(struct mm_struct *mm); +extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr); +extern void flush_tlb_page_nohash(struct vm_area_struct *vma, unsigned long addr); +extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end); +extern void flush_tlb_kernel_range(unsigned long start, unsigned long end); + +#else +/* + * TLB flushing for 64-bit has-MMU CPUs + */ + +#include +#include + +#define PPC64_TLB_BATCH_NR 192 + +struct ppc64_tlb_batch { + int active; + unsigned long index; + struct mm_struct *mm; + real_pte_t pte[PPC64_TLB_BATCH_NR]; + unsigned long vaddr[PPC64_TLB_BATCH_NR]; + unsigned int psize; + int ssize; +}; +DECLARE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch); + +extern void __flush_tlb_pending(struct ppc64_tlb_batch *batch); + +extern void hpte_need_flush(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, unsigned long pte, int huge); + +#define __HAVE_ARCH_ENTER_LAZY_MMU_MODE + +static inline void arch_enter_lazy_mmu_mode(void) +{ + struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch); + + batch->active = 1; +} + +static inline void arch_leave_lazy_mmu_mode(void) +{ + struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch); + + if (batch->index) + __flush_tlb_pending(batch); + batch->active = 0; +} + +#define arch_flush_lazy_mmu_mode() do {} while (0) + + +extern void flush_hash_page(unsigned long va, real_pte_t pte, int psize, + int ssize, int local); +extern void flush_hash_range(unsigned long number, int local); + + +static inline void flush_tlb_mm(struct mm_struct *mm) +{ +} + +static inline void flush_tlb_page(struct vm_area_struct *vma, + unsigned long vmaddr) +{ +} + +static inline void flush_tlb_page_nohash(struct vm_area_struct *vma, + unsigned long vmaddr) +{ +} + +static inline void flush_tlb_range(struct vm_area_struct *vma, + unsigned long start, unsigned long end) +{ +} + +static inline void flush_tlb_kernel_range(unsigned long start, + unsigned long end) +{ +} + +/* Private function for use by PCI IO mapping code */ +extern void __flush_hash_table_range(struct mm_struct *mm, unsigned long start, + unsigned long end); + + +#endif + +#endif /*__KERNEL__ */ +#endif /* _ASM_POWERPC_TLBFLUSH_H */ diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h new file mode 100644 index 00000000000..c32da6f9799 --- /dev/null +++ b/arch/powerpc/include/asm/topology.h @@ -0,0 +1,117 @@ +#ifndef _ASM_POWERPC_TOPOLOGY_H +#define _ASM_POWERPC_TOPOLOGY_H +#ifdef __KERNEL__ + + +struct sys_device; +struct device_node; + +#ifdef CONFIG_NUMA + +#include + +static inline int cpu_to_node(int cpu) +{ + return numa_cpu_lookup_table[cpu]; +} + +#define parent_node(node) (node) + +static inline cpumask_t node_to_cpumask(int node) +{ + return numa_cpumask_lookup_table[node]; +} + +static inline int node_to_first_cpu(int node) +{ + cpumask_t tmp; + tmp = node_to_cpumask(node); + return first_cpu(tmp); +} + +int of_node_to_nid(struct device_node *device); + +struct pci_bus; +#ifdef CONFIG_PCI +extern int pcibus_to_node(struct pci_bus *bus); +#else +static inline int pcibus_to_node(struct pci_bus *bus) +{ + return -1; +} +#endif + +#define pcibus_to_cpumask(bus) (pcibus_to_node(bus) == -1 ? \ + CPU_MASK_ALL : \ + node_to_cpumask(pcibus_to_node(bus)) \ + ) + +/* sched_domains SD_NODE_INIT for PPC64 machines */ +#define SD_NODE_INIT (struct sched_domain) { \ + .span = CPU_MASK_NONE, \ + .parent = NULL, \ + .child = NULL, \ + .groups = NULL, \ + .min_interval = 8, \ + .max_interval = 32, \ + .busy_factor = 32, \ + .imbalance_pct = 125, \ + .cache_nice_tries = 1, \ + .busy_idx = 3, \ + .idle_idx = 1, \ + .newidle_idx = 2, \ + .wake_idx = 1, \ + .flags = SD_LOAD_BALANCE \ + | SD_BALANCE_EXEC \ + | SD_BALANCE_NEWIDLE \ + | SD_WAKE_IDLE \ + | SD_SERIALIZE \ + | SD_WAKE_BALANCE, \ + .last_balance = jiffies, \ + .balance_interval = 1, \ + .nr_balance_failed = 0, \ +} + +extern void __init dump_numa_cpu_topology(void); + +extern int sysfs_add_device_to_node(struct sys_device *dev, int nid); +extern void sysfs_remove_device_from_node(struct sys_device *dev, int nid); + +#else + +static inline int of_node_to_nid(struct device_node *device) +{ + return 0; +} + +static inline void dump_numa_cpu_topology(void) {} + +static inline int sysfs_add_device_to_node(struct sys_device *dev, int nid) +{ + return 0; +} + +static inline void sysfs_remove_device_from_node(struct sys_device *dev, + int nid) +{ +} + +#endif /* CONFIG_NUMA */ + +#include + +#ifdef CONFIG_SMP +#include +#define smt_capable() (cpu_has_feature(CPU_FTR_SMT)) + +#ifdef CONFIG_PPC64 +#include + +#define topology_thread_siblings(cpu) (per_cpu(cpu_sibling_map, cpu)) +#define topology_core_siblings(cpu) (per_cpu(cpu_core_map, cpu)) +#define topology_core_id(cpu) (cpu_to_core_id(cpu)) +#endif +#endif + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_TOPOLOGY_H */ diff --git a/arch/powerpc/include/asm/tsi108.h b/arch/powerpc/include/asm/tsi108.h new file mode 100644 index 00000000000..f8b60793b7a --- /dev/null +++ b/arch/powerpc/include/asm/tsi108.h @@ -0,0 +1,121 @@ +/* + * common routine and memory layout for Tundra TSI108(Grendel) host bridge + * memory controller. + * + * Author: Jacob Pan (jacob.pan@freescale.com) + * Alex Bounine (alexandreb@tundra.com) + * + * Copyright 2004-2006 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef __PPC_KERNEL_TSI108_H +#define __PPC_KERNEL_TSI108_H + +#include + +/* Size of entire register space */ +#define TSI108_REG_SIZE (0x10000) + +/* Sizes of register spaces for individual blocks */ +#define TSI108_HLP_SIZE 0x1000 +#define TSI108_PCI_SIZE 0x1000 +#define TSI108_CLK_SIZE 0x1000 +#define TSI108_PB_SIZE 0x1000 +#define TSI108_SD_SIZE 0x1000 +#define TSI108_DMA_SIZE 0x1000 +#define TSI108_ETH_SIZE 0x1000 +#define TSI108_I2C_SIZE 0x400 +#define TSI108_MPIC_SIZE 0x400 +#define TSI108_UART0_SIZE 0x200 +#define TSI108_GPIO_SIZE 0x200 +#define TSI108_UART1_SIZE 0x200 + +/* Offsets within Tsi108(A) CSR space for individual blocks */ +#define TSI108_HLP_OFFSET 0x0000 +#define TSI108_PCI_OFFSET 0x1000 +#define TSI108_CLK_OFFSET 0x2000 +#define TSI108_PB_OFFSET 0x3000 +#define TSI108_SD_OFFSET 0x4000 +#define TSI108_DMA_OFFSET 0x5000 +#define TSI108_ETH_OFFSET 0x6000 +#define TSI108_I2C_OFFSET 0x7000 +#define TSI108_MPIC_OFFSET 0x7400 +#define TSI108_UART0_OFFSET 0x7800 +#define TSI108_GPIO_OFFSET 0x7A00 +#define TSI108_UART1_OFFSET 0x7C00 + +/* Tsi108 registers used by common code components */ +#define TSI108_PCI_CSR (0x004) +#define TSI108_PCI_IRP_CFG_CTL (0x180) +#define TSI108_PCI_IRP_STAT (0x184) +#define TSI108_PCI_IRP_ENABLE (0x188) +#define TSI108_PCI_IRP_INTAD (0x18C) + +#define TSI108_PCI_IRP_STAT_P_INT (0x00400000) +#define TSI108_PCI_IRP_ENABLE_P_INT (0x00400000) + +#define TSI108_CG_PWRUP_STATUS (0x234) + +#define TSI108_PB_ISR (0x00C) +#define TSI108_PB_ERRCS (0x404) +#define TSI108_PB_AERR (0x408) + +#define TSI108_PB_ERRCS_ES (1 << 1) +#define TSI108_PB_ISR_PBS_RD_ERR (1 << 8) + +#define TSI108_PCI_CFG_SIZE (0x01000000) + +/* + * PHY Configuration Options + * + * Specify "bcm54xx" in the compatible property of your device tree phy + * nodes if your board uses the Broadcom PHYs + */ +#define TSI108_PHY_MV88E 0 /* Marvel 88Exxxx PHY */ +#define TSI108_PHY_BCM54XX 1 /* Broardcom BCM54xx PHY */ + +/* Global variables */ + +extern u32 tsi108_pci_cfg_base; +/* Exported functions */ + +extern int tsi108_bridge_init(struct pci_controller *hose, uint phys_csr_base); +extern unsigned long tsi108_get_mem_size(void); +extern unsigned long tsi108_get_cpu_clk(void); +extern unsigned long tsi108_get_sdc_clk(void); +extern int tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val); +extern int tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 * val); +extern void tsi108_clear_pci_error(u32 pci_cfg_base); + +extern phys_addr_t get_csrbase(void); + +typedef struct { + u32 regs; /* hw registers base address */ + u32 phyregs; /* phy registers base address */ + u16 phy; /* phy address */ + u16 irq_num; /* irq number */ + u8 mac_addr[6]; /* phy mac address */ + u16 phy_type; /* type of phy on board */ +} hw_info; + +extern u32 get_vir_csrbase(void); +extern u32 tsi108_csr_vir_base; + +static inline u32 tsi108_read_reg(u32 reg_offset) +{ + return in_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset)); +} + +static inline void tsi108_write_reg(u32 reg_offset, u32 val) +{ + out_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset), val); +} + +#endif /* __PPC_KERNEL_TSI108_H */ diff --git a/arch/powerpc/include/asm/tsi108_irq.h b/arch/powerpc/include/asm/tsi108_irq.h new file mode 100644 index 00000000000..6ed93979fbe --- /dev/null +++ b/arch/powerpc/include/asm/tsi108_irq.h @@ -0,0 +1,124 @@ +/* + * (C) Copyright 2005 Tundra Semiconductor Corp. + * Alex Bounine, + +/* Register definitions */ +#define TSI108_PCI_P2O_BAR0 (TSI108_PCI_OFFSET + 0x10) +#define TSI108_PCI_P2O_BAR0_UPPER (TSI108_PCI_OFFSET + 0x14) +#define TSI108_PCI_P2O_BAR2 (TSI108_PCI_OFFSET + 0x18) +#define TSI108_PCI_P2O_BAR2_UPPER (TSI108_PCI_OFFSET + 0x1c) +#define TSI108_PCI_P2O_PAGE_SIZES (TSI108_PCI_OFFSET + 0x4c) +#define TSI108_PCI_PFAB_BAR0 (TSI108_PCI_OFFSET + 0x204) +#define TSI108_PCI_PFAB_BAR0_UPPER (TSI108_PCI_OFFSET + 0x208) +#define TSI108_PCI_PFAB_IO (TSI108_PCI_OFFSET + 0x20c) +#define TSI108_PCI_PFAB_IO_UPPER (TSI108_PCI_OFFSET + 0x210) +#define TSI108_PCI_PFAB_MEM32 (TSI108_PCI_OFFSET + 0x214) +#define TSI108_PCI_PFAB_PFM3 (TSI108_PCI_OFFSET + 0x220) +#define TSI108_PCI_PFAB_PFM4 (TSI108_PCI_OFFSET + 0x230) + +extern int tsi108_setup_pci(struct device_node *dev, u32 cfg_phys, int primary); +extern void tsi108_pci_int_init(struct device_node *node); +extern void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc); +extern void tsi108_clear_pci_cfg_error(void); + +#endif /* _ASM_POWERPC_TSI108_PCI_H */ diff --git a/arch/powerpc/include/asm/types.h b/arch/powerpc/include/asm/types.h new file mode 100644 index 00000000000..d3374bc865b --- /dev/null +++ b/arch/powerpc/include/asm/types.h @@ -0,0 +1,75 @@ +#ifndef _ASM_POWERPC_TYPES_H +#define _ASM_POWERPC_TYPES_H + +#ifdef __powerpc64__ +# include +#else +# include +#endif + +#ifndef __ASSEMBLY__ + +/* + * This file is never included by application software unless + * explicitly requested (e.g., via linux/types.h) in which case the + * application is Linux specific so (user-) name space pollution is + * not a major issue. However, for interoperability, libraries still + * need to be careful to avoid a name clashes. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifdef __powerpc64__ +typedef unsigned int umode_t; +#else +typedef unsigned short umode_t; +#endif + +typedef struct { + __u32 u[4]; +} __attribute__((aligned(16))) __vector128; + +#endif /* __ASSEMBLY__ */ + +#ifdef __KERNEL__ +/* + * These aren't exported outside the kernel to avoid name space clashes + */ +#ifdef __powerpc64__ +#define BITS_PER_LONG 64 +#else +#define BITS_PER_LONG 32 +#endif + +#ifndef __ASSEMBLY__ + +typedef __vector128 vector128; + +/* Physical address used by some IO functions */ +#if defined(CONFIG_PPC64) || defined(CONFIG_PHYS_64BIT) +typedef u64 phys_addr_t; +#else +typedef u32 phys_addr_t; +#endif + +#ifdef __powerpc64__ +typedef u64 dma_addr_t; +#else +typedef u32 dma_addr_t; +#endif +typedef u64 dma64_addr_t; + +typedef struct { + unsigned long entry; + unsigned long toc; + unsigned long env; +} func_descr_t; + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_POWERPC_TYPES_H */ diff --git a/arch/powerpc/include/asm/uaccess.h b/arch/powerpc/include/asm/uaccess.h new file mode 100644 index 00000000000..bd0fb849515 --- /dev/null +++ b/arch/powerpc/include/asm/uaccess.h @@ -0,0 +1,496 @@ +#ifndef _ARCH_POWERPC_UACCESS_H +#define _ARCH_POWERPC_UACCESS_H + +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ + +#include +#include +#include +#include +#include + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +/* + * The fs value determines whether argument validity checking should be + * performed or not. If get_fs() == USER_DS, checking is performed, with + * get_fs() == KERNEL_DS, checking is bypassed. + * + * For historical reasons, these macros are grossly misnamed. + * + * The fs/ds values are now the highest legal address in the "segment". + * This simplifies the checking in the routines below. + */ + +#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) + +#define KERNEL_DS MAKE_MM_SEG(~0UL) +#ifdef __powerpc64__ +/* We use TASK_SIZE_USER64 as TASK_SIZE is not constant */ +#define USER_DS MAKE_MM_SEG(TASK_SIZE_USER64 - 1) +#else +#define USER_DS MAKE_MM_SEG(TASK_SIZE - 1) +#endif + +#define get_ds() (KERNEL_DS) +#define get_fs() (current->thread.fs) +#define set_fs(val) (current->thread.fs = (val)) + +#define segment_eq(a, b) ((a).seg == (b).seg) + +#ifdef __powerpc64__ +/* + * This check is sufficient because there is a large enough + * gap between user addresses and the kernel addresses + */ +#define __access_ok(addr, size, segment) \ + (((addr) <= (segment).seg) && ((size) <= (segment).seg)) + +#else + +#define __access_ok(addr, size, segment) \ + (((addr) <= (segment).seg) && \ + (((size) == 0) || (((size) - 1) <= ((segment).seg - (addr))))) + +#endif + +#define access_ok(type, addr, size) \ + (__chk_user_ptr(addr), \ + __access_ok((__force unsigned long)(addr), (size), get_fs())) + +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + */ + +struct exception_table_entry { + unsigned long insn; + unsigned long fixup; +}; + +/* + * These are the main single-value transfer routines. They automatically + * use the right size if we just have the right pointer type. + * + * This gets kind of ugly. We want to return _two_ values in "get_user()" + * and yet we don't want to do any pointers, because that is too much + * of a performance impact. Thus we have a few rather ugly macros here, + * and hide all the ugliness from the user. + * + * The "__xxx" versions of the user access functions are versions that + * do not verify the address space, that must have been done previously + * with a separate "access_ok()" call (this is used when we do multiple + * accesses to the same area of user memory). + * + * As we use the same address space for kernel and user data on the + * PowerPC, we can just do these as direct assignments. (Of course, the + * exception handling means that it's no longer "just"...) + * + * The "user64" versions of the user access functions are versions that + * allow access of 64-bit data. The "get_user" functions do not + * properly handle 64-bit data because the value gets down cast to a long. + * The "put_user" functions already handle 64-bit data properly but we add + * "user64" versions for completeness + */ +#define get_user(x, ptr) \ + __get_user_check((x), (ptr), sizeof(*(ptr))) +#define put_user(x, ptr) \ + __put_user_check((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr))) + +#define __get_user(x, ptr) \ + __get_user_nocheck((x), (ptr), sizeof(*(ptr))) +#define __put_user(x, ptr) \ + __put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr))) + +#ifndef __powerpc64__ +#define __get_user64(x, ptr) \ + __get_user64_nocheck((x), (ptr), sizeof(*(ptr))) +#define __put_user64(x, ptr) __put_user(x, ptr) +#endif + +#define __get_user_inatomic(x, ptr) \ + __get_user_nosleep((x), (ptr), sizeof(*(ptr))) +#define __put_user_inatomic(x, ptr) \ + __put_user_nosleep((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr))) + +#define __get_user_unaligned __get_user +#define __put_user_unaligned __put_user + +extern long __put_user_bad(void); + +/* + * We don't tell gcc that we are accessing memory, but this is OK + * because we do not write to any memory gcc knows about, so there + * are no aliasing issues. + */ +#define __put_user_asm(x, addr, err, op) \ + __asm__ __volatile__( \ + "1: " op " %1,0(%2) # put_user\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3: li %0,%3\n" \ + " b 2b\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + PPC_LONG_ALIGN "\n" \ + PPC_LONG "1b,3b\n" \ + ".previous" \ + : "=r" (err) \ + : "r" (x), "b" (addr), "i" (-EFAULT), "0" (err)) + +#ifdef __powerpc64__ +#define __put_user_asm2(x, ptr, retval) \ + __put_user_asm(x, ptr, retval, "std") +#else /* __powerpc64__ */ +#define __put_user_asm2(x, addr, err) \ + __asm__ __volatile__( \ + "1: stw %1,0(%2)\n" \ + "2: stw %1+1,4(%2)\n" \ + "3:\n" \ + ".section .fixup,\"ax\"\n" \ + "4: li %0,%3\n" \ + " b 3b\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + PPC_LONG_ALIGN "\n" \ + PPC_LONG "1b,4b\n" \ + PPC_LONG "2b,4b\n" \ + ".previous" \ + : "=r" (err) \ + : "r" (x), "b" (addr), "i" (-EFAULT), "0" (err)) +#endif /* __powerpc64__ */ + +#define __put_user_size(x, ptr, size, retval) \ +do { \ + retval = 0; \ + switch (size) { \ + case 1: __put_user_asm(x, ptr, retval, "stb"); break; \ + case 2: __put_user_asm(x, ptr, retval, "sth"); break; \ + case 4: __put_user_asm(x, ptr, retval, "stw"); break; \ + case 8: __put_user_asm2(x, ptr, retval); break; \ + default: __put_user_bad(); \ + } \ +} while (0) + +#define __put_user_nocheck(x, ptr, size) \ +({ \ + long __pu_err; \ + __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + if (!is_kernel_addr((unsigned long)__pu_addr)) \ + might_sleep(); \ + __chk_user_ptr(ptr); \ + __put_user_size((x), __pu_addr, (size), __pu_err); \ + __pu_err; \ +}) + +#define __put_user_check(x, ptr, size) \ +({ \ + long __pu_err = -EFAULT; \ + __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + might_sleep(); \ + if (access_ok(VERIFY_WRITE, __pu_addr, size)) \ + __put_user_size((x), __pu_addr, (size), __pu_err); \ + __pu_err; \ +}) + +#define __put_user_nosleep(x, ptr, size) \ +({ \ + long __pu_err; \ + __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + __chk_user_ptr(ptr); \ + __put_user_size((x), __pu_addr, (size), __pu_err); \ + __pu_err; \ +}) + + +extern long __get_user_bad(void); + +#define __get_user_asm(x, addr, err, op) \ + __asm__ __volatile__( \ + "1: "op" %1,0(%2) # get_user\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3: li %0,%3\n" \ + " li %1,0\n" \ + " b 2b\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + PPC_LONG_ALIGN "\n" \ + PPC_LONG "1b,3b\n" \ + ".previous" \ + : "=r" (err), "=r" (x) \ + : "b" (addr), "i" (-EFAULT), "0" (err)) + +#ifdef __powerpc64__ +#define __get_user_asm2(x, addr, err) \ + __get_user_asm(x, addr, err, "ld") +#else /* __powerpc64__ */ +#define __get_user_asm2(x, addr, err) \ + __asm__ __volatile__( \ + "1: lwz %1,0(%2)\n" \ + "2: lwz %1+1,4(%2)\n" \ + "3:\n" \ + ".section .fixup,\"ax\"\n" \ + "4: li %0,%3\n" \ + " li %1,0\n" \ + " li %1+1,0\n" \ + " b 3b\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + PPC_LONG_ALIGN "\n" \ + PPC_LONG "1b,4b\n" \ + PPC_LONG "2b,4b\n" \ + ".previous" \ + : "=r" (err), "=&r" (x) \ + : "b" (addr), "i" (-EFAULT), "0" (err)) +#endif /* __powerpc64__ */ + +#define __get_user_size(x, ptr, size, retval) \ +do { \ + retval = 0; \ + __chk_user_ptr(ptr); \ + if (size > sizeof(x)) \ + (x) = __get_user_bad(); \ + switch (size) { \ + case 1: __get_user_asm(x, ptr, retval, "lbz"); break; \ + case 2: __get_user_asm(x, ptr, retval, "lhz"); break; \ + case 4: __get_user_asm(x, ptr, retval, "lwz"); break; \ + case 8: __get_user_asm2(x, ptr, retval); break; \ + default: (x) = __get_user_bad(); \ + } \ +} while (0) + +#define __get_user_nocheck(x, ptr, size) \ +({ \ + long __gu_err; \ + unsigned long __gu_val; \ + const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ + __chk_user_ptr(ptr); \ + if (!is_kernel_addr((unsigned long)__gu_addr)) \ + might_sleep(); \ + __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ + (x) = (__typeof__(*(ptr)))__gu_val; \ + __gu_err; \ +}) + +#ifndef __powerpc64__ +#define __get_user64_nocheck(x, ptr, size) \ +({ \ + long __gu_err; \ + long long __gu_val; \ + const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ + __chk_user_ptr(ptr); \ + if (!is_kernel_addr((unsigned long)__gu_addr)) \ + might_sleep(); \ + __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ + (x) = (__typeof__(*(ptr)))__gu_val; \ + __gu_err; \ +}) +#endif /* __powerpc64__ */ + +#define __get_user_check(x, ptr, size) \ +({ \ + long __gu_err = -EFAULT; \ + unsigned long __gu_val = 0; \ + const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ + might_sleep(); \ + if (access_ok(VERIFY_READ, __gu_addr, (size))) \ + __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ + (x) = (__typeof__(*(ptr)))__gu_val; \ + __gu_err; \ +}) + +#define __get_user_nosleep(x, ptr, size) \ +({ \ + long __gu_err; \ + unsigned long __gu_val; \ + const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ + __chk_user_ptr(ptr); \ + __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ + (x) = (__typeof__(*(ptr)))__gu_val; \ + __gu_err; \ +}) + + +/* more complex routines */ + +extern unsigned long __copy_tofrom_user(void __user *to, + const void __user *from, unsigned long size); + +#ifndef __powerpc64__ + +static inline unsigned long copy_from_user(void *to, + const void __user *from, unsigned long n) +{ + unsigned long over; + + if (access_ok(VERIFY_READ, from, n)) + return __copy_tofrom_user((__force void __user *)to, from, n); + if ((unsigned long)from < TASK_SIZE) { + over = (unsigned long)from + n - TASK_SIZE; + return __copy_tofrom_user((__force void __user *)to, from, + n - over) + over; + } + return n; +} + +static inline unsigned long copy_to_user(void __user *to, + const void *from, unsigned long n) +{ + unsigned long over; + + if (access_ok(VERIFY_WRITE, to, n)) + return __copy_tofrom_user(to, (__force void __user *)from, n); + if ((unsigned long)to < TASK_SIZE) { + over = (unsigned long)to + n - TASK_SIZE; + return __copy_tofrom_user(to, (__force void __user *)from, + n - over) + over; + } + return n; +} + +#else /* __powerpc64__ */ + +#define __copy_in_user(to, from, size) \ + __copy_tofrom_user((to), (from), (size)) + +extern unsigned long copy_from_user(void *to, const void __user *from, + unsigned long n); +extern unsigned long copy_to_user(void __user *to, const void *from, + unsigned long n); +extern unsigned long copy_in_user(void __user *to, const void __user *from, + unsigned long n); + +#endif /* __powerpc64__ */ + +static inline unsigned long __copy_from_user_inatomic(void *to, + const void __user *from, unsigned long n) +{ + if (__builtin_constant_p(n) && (n <= 8)) { + unsigned long ret = 1; + + switch (n) { + case 1: + __get_user_size(*(u8 *)to, from, 1, ret); + break; + case 2: + __get_user_size(*(u16 *)to, from, 2, ret); + break; + case 4: + __get_user_size(*(u32 *)to, from, 4, ret); + break; + case 8: + __get_user_size(*(u64 *)to, from, 8, ret); + break; + } + if (ret == 0) + return 0; + } + return __copy_tofrom_user((__force void __user *)to, from, n); +} + +static inline unsigned long __copy_to_user_inatomic(void __user *to, + const void *from, unsigned long n) +{ + if (__builtin_constant_p(n) && (n <= 8)) { + unsigned long ret = 1; + + switch (n) { + case 1: + __put_user_size(*(u8 *)from, (u8 __user *)to, 1, ret); + break; + case 2: + __put_user_size(*(u16 *)from, (u16 __user *)to, 2, ret); + break; + case 4: + __put_user_size(*(u32 *)from, (u32 __user *)to, 4, ret); + break; + case 8: + __put_user_size(*(u64 *)from, (u64 __user *)to, 8, ret); + break; + } + if (ret == 0) + return 0; + } + return __copy_tofrom_user(to, (__force const void __user *)from, n); +} + +static inline unsigned long __copy_from_user(void *to, + const void __user *from, unsigned long size) +{ + might_sleep(); + return __copy_from_user_inatomic(to, from, size); +} + +static inline unsigned long __copy_to_user(void __user *to, + const void *from, unsigned long size) +{ + might_sleep(); + return __copy_to_user_inatomic(to, from, size); +} + +extern unsigned long __clear_user(void __user *addr, unsigned long size); + +static inline unsigned long clear_user(void __user *addr, unsigned long size) +{ + might_sleep(); + if (likely(access_ok(VERIFY_WRITE, addr, size))) + return __clear_user(addr, size); + if ((unsigned long)addr < TASK_SIZE) { + unsigned long over = (unsigned long)addr + size - TASK_SIZE; + return __clear_user(addr, size - over) + over; + } + return size; +} + +extern int __strncpy_from_user(char *dst, const char __user *src, long count); + +static inline long strncpy_from_user(char *dst, const char __user *src, + long count) +{ + might_sleep(); + if (likely(access_ok(VERIFY_READ, src, 1))) + return __strncpy_from_user(dst, src, count); + return -EFAULT; +} + +/* + * Return the size of a string (including the ending 0) + * + * Return 0 for error + */ +extern int __strnlen_user(const char __user *str, long len, unsigned long top); + +/* + * Returns the length of the string at str (including the null byte), + * or 0 if we hit a page we can't access, + * or something > len if we didn't find a null byte. + * + * The `top' parameter to __strnlen_user is to make sure that + * we can never overflow from the user area into kernel space. + */ +static inline int strnlen_user(const char __user *str, long len) +{ + unsigned long top = current->thread.fs.seg; + + if ((unsigned long)str > top) + return 0; + return __strnlen_user(str, len, top); +} + +#define strlen_user(str) strnlen_user((str), 0x7ffffffe) + +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ + +#endif /* _ARCH_POWERPC_UACCESS_H */ diff --git a/arch/powerpc/include/asm/ucc.h b/arch/powerpc/include/asm/ucc.h new file mode 100644 index 00000000000..46b09ba6bea --- /dev/null +++ b/arch/powerpc/include/asm/ucc.h @@ -0,0 +1,64 @@ +/* + * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. + * + * Authors: Shlomi Gridish + * Li Yang + * + * Description: + * Internal header file for UCC unit routines. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef __UCC_H__ +#define __UCC_H__ + +#include +#include + +#define STATISTICS + +#define UCC_MAX_NUM 8 + +/* Slow or fast type for UCCs. +*/ +enum ucc_speed_type { + UCC_SPEED_TYPE_FAST = UCC_GUEMR_MODE_FAST_RX | UCC_GUEMR_MODE_FAST_TX, + UCC_SPEED_TYPE_SLOW = UCC_GUEMR_MODE_SLOW_RX | UCC_GUEMR_MODE_SLOW_TX +}; + +/* ucc_set_type + * Sets UCC to slow or fast mode. + * + * ucc_num - (In) number of UCC (0-7). + * speed - (In) slow or fast mode for UCC. + */ +int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed); + +int ucc_set_qe_mux_mii_mng(unsigned int ucc_num); + +int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock, + enum comm_dir mode); + +int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask); + +/* QE MUX clock routing for UCC +*/ +static inline int ucc_set_qe_mux_grant(unsigned int ucc_num, int set) +{ + return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_GRANT); +} + +static inline int ucc_set_qe_mux_tsa(unsigned int ucc_num, int set) +{ + return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_TSA); +} + +static inline int ucc_set_qe_mux_bkpt(unsigned int ucc_num, int set) +{ + return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_BKPT); +} + +#endif /* __UCC_H__ */ diff --git a/arch/powerpc/include/asm/ucc_fast.h b/arch/powerpc/include/asm/ucc_fast.h new file mode 100644 index 00000000000..839aab8bf37 --- /dev/null +++ b/arch/powerpc/include/asm/ucc_fast.h @@ -0,0 +1,244 @@ +/* + * Internal header file for UCC FAST unit routines. + * + * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. + * + * Authors: Shlomi Gridish + * Li Yang + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef __UCC_FAST_H__ +#define __UCC_FAST_H__ + +#include + +#include +#include + +#include "ucc.h" + +/* Receive BD's status */ +#define R_E 0x80000000 /* buffer empty */ +#define R_W 0x20000000 /* wrap bit */ +#define R_I 0x10000000 /* interrupt on reception */ +#define R_L 0x08000000 /* last */ +#define R_F 0x04000000 /* first */ + +/* transmit BD's status */ +#define T_R 0x80000000 /* ready bit */ +#define T_W 0x20000000 /* wrap bit */ +#define T_I 0x10000000 /* interrupt on completion */ +#define T_L 0x08000000 /* last */ + +/* Rx Data buffer must be 4 bytes aligned in most cases */ +#define UCC_FAST_RX_ALIGN 4 +#define UCC_FAST_MRBLR_ALIGNMENT 4 +#define UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT 8 + +/* Sizes */ +#define UCC_FAST_URFS_MIN_VAL 0x88 +#define UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR 8 + +/* ucc_fast_channel_protocol_mode - UCC FAST mode */ +enum ucc_fast_channel_protocol_mode { + UCC_FAST_PROTOCOL_MODE_HDLC = 0x00000000, + UCC_FAST_PROTOCOL_MODE_RESERVED01 = 0x00000001, + UCC_FAST_PROTOCOL_MODE_RESERVED_QMC = 0x00000002, + UCC_FAST_PROTOCOL_MODE_RESERVED02 = 0x00000003, + UCC_FAST_PROTOCOL_MODE_RESERVED_UART = 0x00000004, + UCC_FAST_PROTOCOL_MODE_RESERVED03 = 0x00000005, + UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_1 = 0x00000006, + UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_2 = 0x00000007, + UCC_FAST_PROTOCOL_MODE_RESERVED_BISYNC = 0x00000008, + UCC_FAST_PROTOCOL_MODE_RESERVED04 = 0x00000009, + UCC_FAST_PROTOCOL_MODE_ATM = 0x0000000A, + UCC_FAST_PROTOCOL_MODE_RESERVED05 = 0x0000000B, + UCC_FAST_PROTOCOL_MODE_ETHERNET = 0x0000000C, + UCC_FAST_PROTOCOL_MODE_RESERVED06 = 0x0000000D, + UCC_FAST_PROTOCOL_MODE_POS = 0x0000000E, + UCC_FAST_PROTOCOL_MODE_RESERVED07 = 0x0000000F +}; + +/* ucc_fast_transparent_txrx - UCC Fast Transparent TX & RX */ +enum ucc_fast_transparent_txrx { + UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_NORMAL = 0x00000000, + UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_TRANSPARENT = 0x18000000 +}; + +/* UCC fast diagnostic mode */ +enum ucc_fast_diag_mode { + UCC_FAST_DIAGNOSTIC_NORMAL = 0x0, + UCC_FAST_DIAGNOSTIC_LOCAL_LOOP_BACK = 0x40000000, + UCC_FAST_DIAGNOSTIC_AUTO_ECHO = 0x80000000, + UCC_FAST_DIAGNOSTIC_LOOP_BACK_AND_ECHO = 0xC0000000 +}; + +/* UCC fast Sync length (transparent mode only) */ +enum ucc_fast_sync_len { + UCC_FAST_SYNC_LEN_NOT_USED = 0x0, + UCC_FAST_SYNC_LEN_AUTOMATIC = 0x00004000, + UCC_FAST_SYNC_LEN_8_BIT = 0x00008000, + UCC_FAST_SYNC_LEN_16_BIT = 0x0000C000 +}; + +/* UCC fast RTS mode */ +enum ucc_fast_ready_to_send { + UCC_FAST_SEND_IDLES_BETWEEN_FRAMES = 0x00000000, + UCC_FAST_SEND_FLAGS_BETWEEN_FRAMES = 0x00002000 +}; + +/* UCC fast receiver decoding mode */ +enum ucc_fast_rx_decoding_method { + UCC_FAST_RX_ENCODING_NRZ = 0x00000000, + UCC_FAST_RX_ENCODING_NRZI = 0x00000800, + UCC_FAST_RX_ENCODING_RESERVED0 = 0x00001000, + UCC_FAST_RX_ENCODING_RESERVED1 = 0x00001800 +}; + +/* UCC fast transmitter encoding mode */ +enum ucc_fast_tx_encoding_method { + UCC_FAST_TX_ENCODING_NRZ = 0x00000000, + UCC_FAST_TX_ENCODING_NRZI = 0x00000100, + UCC_FAST_TX_ENCODING_RESERVED0 = 0x00000200, + UCC_FAST_TX_ENCODING_RESERVED1 = 0x00000300 +}; + +/* UCC fast CRC length */ +enum ucc_fast_transparent_tcrc { + UCC_FAST_16_BIT_CRC = 0x00000000, + UCC_FAST_CRC_RESERVED0 = 0x00000040, + UCC_FAST_32_BIT_CRC = 0x00000080, + UCC_FAST_CRC_RESERVED1 = 0x000000C0 +}; + +/* Fast UCC initialization structure */ +struct ucc_fast_info { + int ucc_num; + enum qe_clock rx_clock; + enum qe_clock tx_clock; + u32 regs; + int irq; + u32 uccm_mask; + int bd_mem_part; + int brkpt_support; + int grant_support; + int tsa; + int cdp; + int cds; + int ctsp; + int ctss; + int tci; + int txsy; + int rtsm; + int revd; + int rsyn; + u16 max_rx_buf_length; + u16 urfs; + u16 urfet; + u16 urfset; + u16 utfs; + u16 utfet; + u16 utftt; + u16 ufpt; + enum ucc_fast_channel_protocol_mode mode; + enum ucc_fast_transparent_txrx ttx_trx; + enum ucc_fast_tx_encoding_method tenc; + enum ucc_fast_rx_decoding_method renc; + enum ucc_fast_transparent_tcrc tcrc; + enum ucc_fast_sync_len synl; +}; + +struct ucc_fast_private { + struct ucc_fast_info *uf_info; + struct ucc_fast __iomem *uf_regs; /* a pointer to the UCC regs. */ + u32 __iomem *p_ucce; /* a pointer to the event register in memory. */ + u32 __iomem *p_uccm; /* a pointer to the mask register in memory. */ +#ifdef CONFIG_UGETH_TX_ON_DEMAND + u16 __iomem *p_utodr; /* pointer to the transmit on demand register */ +#endif + int enabled_tx; /* Whether channel is enabled for Tx (ENT) */ + int enabled_rx; /* Whether channel is enabled for Rx (ENR) */ + int stopped_tx; /* Whether channel has been stopped for Tx + (STOP_TX, etc.) */ + int stopped_rx; /* Whether channel has been stopped for Rx */ + u32 ucc_fast_tx_virtual_fifo_base_offset;/* pointer to base of Tx + virtual fifo */ + u32 ucc_fast_rx_virtual_fifo_base_offset;/* pointer to base of Rx + virtual fifo */ +#ifdef STATISTICS + u32 tx_frames; /* Transmitted frames counter. */ + u32 rx_frames; /* Received frames counter (only frames + passed to application). */ + u32 tx_discarded; /* Discarded tx frames counter (frames that + were discarded by the driver due to errors). + */ + u32 rx_discarded; /* Discarded rx frames counter (frames that + were discarded by the driver due to errors). + */ +#endif /* STATISTICS */ + u16 mrblr; /* maximum receive buffer length */ +}; + +/* ucc_fast_init + * Initializes Fast UCC according to user provided parameters. + * + * uf_info - (In) pointer to the fast UCC info structure. + * uccf_ret - (Out) pointer to the fast UCC structure. + */ +int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret); + +/* ucc_fast_free + * Frees all resources for fast UCC. + * + * uccf - (In) pointer to the fast UCC structure. + */ +void ucc_fast_free(struct ucc_fast_private * uccf); + +/* ucc_fast_enable + * Enables a fast UCC port. + * This routine enables Tx and/or Rx through the General UCC Mode Register. + * + * uccf - (In) pointer to the fast UCC structure. + * mode - (In) TX, RX, or both. + */ +void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode); + +/* ucc_fast_disable + * Disables a fast UCC port. + * This routine disables Tx and/or Rx through the General UCC Mode Register. + * + * uccf - (In) pointer to the fast UCC structure. + * mode - (In) TX, RX, or both. + */ +void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode); + +/* ucc_fast_irq + * Handles interrupts on fast UCC. + * Called from the general interrupt routine to handle interrupts on fast UCC. + * + * uccf - (In) pointer to the fast UCC structure. + */ +void ucc_fast_irq(struct ucc_fast_private * uccf); + +/* ucc_fast_transmit_on_demand + * Immediately forces a poll of the transmitter for data to be sent. + * Typically, the hardware performs a periodic poll for data that the + * transmit routine has set up to be transmitted. In cases where + * this polling cycle is not soon enough, this optional routine can + * be invoked to force a poll right away, instead. Proper use for + * each transmission for which this functionality is desired is to + * call the transmit routine and then this routine right after. + * + * uccf - (In) pointer to the fast UCC structure. + */ +void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf); + +u32 ucc_fast_get_qe_cr_subblock(int uccf_num); + +void ucc_fast_dump_regs(struct ucc_fast_private * uccf); + +#endif /* __UCC_FAST_H__ */ diff --git a/arch/powerpc/include/asm/ucc_slow.h b/arch/powerpc/include/asm/ucc_slow.h new file mode 100644 index 00000000000..0980e6ad335 --- /dev/null +++ b/arch/powerpc/include/asm/ucc_slow.h @@ -0,0 +1,290 @@ +/* + * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. + * + * Authors: Shlomi Gridish + * Li Yang + * + * Description: + * Internal header file for UCC SLOW unit routines. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef __UCC_SLOW_H__ +#define __UCC_SLOW_H__ + +#include + +#include +#include + +#include "ucc.h" + +/* transmit BD's status */ +#define T_R 0x80000000 /* ready bit */ +#define T_PAD 0x40000000 /* add pads to short frames */ +#define T_W 0x20000000 /* wrap bit */ +#define T_I 0x10000000 /* interrupt on completion */ +#define T_L 0x08000000 /* last */ + +#define T_A 0x04000000 /* Address - the data transmitted as address + chars */ +#define T_TC 0x04000000 /* transmit CRC */ +#define T_CM 0x02000000 /* continuous mode */ +#define T_DEF 0x02000000 /* collision on previous attempt to transmit */ +#define T_P 0x01000000 /* Preamble - send Preamble sequence before + data */ +#define T_HB 0x01000000 /* heartbeat */ +#define T_NS 0x00800000 /* No Stop */ +#define T_LC 0x00800000 /* late collision */ +#define T_RL 0x00400000 /* retransmission limit */ +#define T_UN 0x00020000 /* underrun */ +#define T_CT 0x00010000 /* CTS lost */ +#define T_CSL 0x00010000 /* carrier sense lost */ +#define T_RC 0x003c0000 /* retry count */ + +/* Receive BD's status */ +#define R_E 0x80000000 /* buffer empty */ +#define R_W 0x20000000 /* wrap bit */ +#define R_I 0x10000000 /* interrupt on reception */ +#define R_L 0x08000000 /* last */ +#define R_C 0x08000000 /* the last byte in this buffer is a cntl + char */ +#define R_F 0x04000000 /* first */ +#define R_A 0x04000000 /* the first byte in this buffer is address + byte */ +#define R_CM 0x02000000 /* continuous mode */ +#define R_ID 0x01000000 /* buffer close on reception of idles */ +#define R_M 0x01000000 /* Frame received because of promiscuous + mode */ +#define R_AM 0x00800000 /* Address match */ +#define R_DE 0x00800000 /* Address match */ +#define R_LG 0x00200000 /* Break received */ +#define R_BR 0x00200000 /* Frame length violation */ +#define R_NO 0x00100000 /* Rx Non Octet Aligned Packet */ +#define R_FR 0x00100000 /* Framing Error (no stop bit) character + received */ +#define R_PR 0x00080000 /* Parity Error character received */ +#define R_AB 0x00080000 /* Frame Aborted */ +#define R_SH 0x00080000 /* frame is too short */ +#define R_CR 0x00040000 /* CRC Error */ +#define R_OV 0x00020000 /* Overrun */ +#define R_CD 0x00010000 /* CD lost */ +#define R_CL 0x00010000 /* this frame is closed because of a + collision */ + +/* Rx Data buffer must be 4 bytes aligned in most cases.*/ +#define UCC_SLOW_RX_ALIGN 4 +#define UCC_SLOW_MRBLR_ALIGNMENT 4 +#define UCC_SLOW_PRAM_SIZE 0x100 +#define ALIGNMENT_OF_UCC_SLOW_PRAM 64 + +/* UCC Slow Channel Protocol Mode */ +enum ucc_slow_channel_protocol_mode { + UCC_SLOW_CHANNEL_PROTOCOL_MODE_QMC = 0x00000002, + UCC_SLOW_CHANNEL_PROTOCOL_MODE_UART = 0x00000004, + UCC_SLOW_CHANNEL_PROTOCOL_MODE_BISYNC = 0x00000008, +}; + +/* UCC Slow Transparent Transmit CRC (TCRC) */ +enum ucc_slow_transparent_tcrc { + /* 16-bit CCITT CRC (HDLC). (X16 + X12 + X5 + 1) */ + UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC16 = 0x00000000, + /* CRC16 (BISYNC). (X16 + X15 + X2 + 1) */ + UCC_SLOW_TRANSPARENT_TCRC_CRC16 = 0x00004000, + /* 32-bit CCITT CRC (Ethernet and HDLC) */ + UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC32 = 0x00008000, +}; + +/* UCC Slow oversampling rate for transmitter (TDCR) */ +enum ucc_slow_tx_oversampling_rate { + /* 1x clock mode */ + UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_1 = 0x00000000, + /* 8x clock mode */ + UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_8 = 0x00010000, + /* 16x clock mode */ + UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_16 = 0x00020000, + /* 32x clock mode */ + UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_32 = 0x00030000, +}; + +/* UCC Slow Oversampling rate for receiver (RDCR) +*/ +enum ucc_slow_rx_oversampling_rate { + /* 1x clock mode */ + UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_1 = 0x00000000, + /* 8x clock mode */ + UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_8 = 0x00004000, + /* 16x clock mode */ + UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_16 = 0x00008000, + /* 32x clock mode */ + UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_32 = 0x0000c000, +}; + +/* UCC Slow Transmitter encoding method (TENC) +*/ +enum ucc_slow_tx_encoding_method { + UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZ = 0x00000000, + UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZI = 0x00000100 +}; + +/* UCC Slow Receiver decoding method (RENC) +*/ +enum ucc_slow_rx_decoding_method { + UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZ = 0x00000000, + UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZI = 0x00000800 +}; + +/* UCC Slow Diagnostic mode (DIAG) +*/ +enum ucc_slow_diag_mode { + UCC_SLOW_DIAG_MODE_NORMAL = 0x00000000, + UCC_SLOW_DIAG_MODE_LOOPBACK = 0x00000040, + UCC_SLOW_DIAG_MODE_ECHO = 0x00000080, + UCC_SLOW_DIAG_MODE_LOOPBACK_ECHO = 0x000000c0 +}; + +struct ucc_slow_info { + int ucc_num; + int protocol; /* QE_CR_PROTOCOL_xxx */ + enum qe_clock rx_clock; + enum qe_clock tx_clock; + phys_addr_t regs; + int irq; + u16 uccm_mask; + int data_mem_part; + int init_tx; + int init_rx; + u32 tx_bd_ring_len; + u32 rx_bd_ring_len; + int rx_interrupts; + int brkpt_support; + int grant_support; + int tsa; + int cdp; + int cds; + int ctsp; + int ctss; + int rinv; + int tinv; + int rtsm; + int rfw; + int tci; + int tend; + int tfl; + int txsy; + u16 max_rx_buf_length; + enum ucc_slow_transparent_tcrc tcrc; + enum ucc_slow_channel_protocol_mode mode; + enum ucc_slow_diag_mode diag; + enum ucc_slow_tx_oversampling_rate tdcr; + enum ucc_slow_rx_oversampling_rate rdcr; + enum ucc_slow_tx_encoding_method tenc; + enum ucc_slow_rx_decoding_method renc; +}; + +struct ucc_slow_private { + struct ucc_slow_info *us_info; + struct ucc_slow __iomem *us_regs; /* Ptr to memory map of UCC regs */ + struct ucc_slow_pram *us_pram; /* a pointer to the parameter RAM */ + u32 us_pram_offset; + int enabled_tx; /* Whether channel is enabled for Tx (ENT) */ + int enabled_rx; /* Whether channel is enabled for Rx (ENR) */ + int stopped_tx; /* Whether channel has been stopped for Tx + (STOP_TX, etc.) */ + int stopped_rx; /* Whether channel has been stopped for Rx */ + struct list_head confQ; /* frames passed to chip waiting for tx */ + u32 first_tx_bd_mask; /* mask is used in Tx routine to save status + and length for first BD in a frame */ + u32 tx_base_offset; /* first BD in Tx BD table offset (In MURAM) */ + u32 rx_base_offset; /* first BD in Rx BD table offset (In MURAM) */ + struct qe_bd *confBd; /* next BD for confirm after Tx */ + struct qe_bd *tx_bd; /* next BD for new Tx request */ + struct qe_bd *rx_bd; /* next BD to collect after Rx */ + void *p_rx_frame; /* accumulating receive frame */ + u16 *p_ucce; /* a pointer to the event register in memory. + */ + u16 *p_uccm; /* a pointer to the mask register in memory */ + u16 saved_uccm; /* a saved mask for the RX Interrupt bits */ +#ifdef STATISTICS + u32 tx_frames; /* Transmitted frames counters */ + u32 rx_frames; /* Received frames counters (only frames + passed to application) */ + u32 rx_discarded; /* Discarded frames counters (frames that + were discarded by the driver due to + errors) */ +#endif /* STATISTICS */ +}; + +/* ucc_slow_init + * Initializes Slow UCC according to provided parameters. + * + * us_info - (In) pointer to the slow UCC info structure. + * uccs_ret - (Out) pointer to the slow UCC structure. + */ +int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret); + +/* ucc_slow_free + * Frees all resources for slow UCC. + * + * uccs - (In) pointer to the slow UCC structure. + */ +void ucc_slow_free(struct ucc_slow_private * uccs); + +/* ucc_slow_enable + * Enables a fast UCC port. + * This routine enables Tx and/or Rx through the General UCC Mode Register. + * + * uccs - (In) pointer to the slow UCC structure. + * mode - (In) TX, RX, or both. + */ +void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode); + +/* ucc_slow_disable + * Disables a fast UCC port. + * This routine disables Tx and/or Rx through the General UCC Mode Register. + * + * uccs - (In) pointer to the slow UCC structure. + * mode - (In) TX, RX, or both. + */ +void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode); + +/* ucc_slow_poll_transmitter_now + * Immediately forces a poll of the transmitter for data to be sent. + * Typically, the hardware performs a periodic poll for data that the + * transmit routine has set up to be transmitted. In cases where + * this polling cycle is not soon enough, this optional routine can + * be invoked to force a poll right away, instead. Proper use for + * each transmission for which this functionality is desired is to + * call the transmit routine and then this routine right after. + * + * uccs - (In) pointer to the slow UCC structure. + */ +void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs); + +/* ucc_slow_graceful_stop_tx + * Smoothly stops transmission on a specified slow UCC. + * + * uccs - (In) pointer to the slow UCC structure. + */ +void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs); + +/* ucc_slow_stop_tx + * Stops transmission on a specified slow UCC. + * + * uccs - (In) pointer to the slow UCC structure. + */ +void ucc_slow_stop_tx(struct ucc_slow_private * uccs); + +/* ucc_slow_restart_tx + * Restarts transmitting on a specified slow UCC. + * + * uccs - (In) pointer to the slow UCC structure. + */ +void ucc_slow_restart_tx(struct ucc_slow_private *uccs); + +u32 ucc_slow_get_qe_cr_subblock(int uccs_num); + +#endif /* __UCC_SLOW_H__ */ diff --git a/arch/powerpc/include/asm/ucontext.h b/arch/powerpc/include/asm/ucontext.h new file mode 100644 index 00000000000..d9a4ddf0cc8 --- /dev/null +++ b/arch/powerpc/include/asm/ucontext.h @@ -0,0 +1,40 @@ +#ifndef _ASM_POWERPC_UCONTEXT_H +#define _ASM_POWERPC_UCONTEXT_H + +#ifdef __powerpc64__ +#include +#else +#include +#endif +#include + +#ifndef __powerpc64__ +struct mcontext { + elf_gregset_t mc_gregs; + elf_fpregset_t mc_fregs; + unsigned long mc_pad[2]; + elf_vrregset_t mc_vregs __attribute__((__aligned__(16))); +}; +#endif + +struct ucontext { + unsigned long uc_flags; + struct ucontext __user *uc_link; + stack_t uc_stack; +#ifndef __powerpc64__ + int uc_pad[7]; + struct mcontext __user *uc_regs;/* points to uc_mcontext field */ +#endif + sigset_t uc_sigmask; + /* glibc has 1024-bit signal masks, ours are 64-bit */ +#ifdef __powerpc64__ + sigset_t __unused[15]; /* Allow for uc_sigmask growth */ + struct sigcontext uc_mcontext; /* last for extensibility */ +#else + int uc_maskext[30]; + int uc_pad2[3]; + struct mcontext uc_mcontext; +#endif +}; + +#endif /* _ASM_POWERPC_UCONTEXT_H */ diff --git a/arch/powerpc/include/asm/udbg.h b/arch/powerpc/include/asm/udbg.h new file mode 100644 index 00000000000..6418ceea44b --- /dev/null +++ b/arch/powerpc/include/asm/udbg.h @@ -0,0 +1,55 @@ +/* + * (c) 2001, 2006 IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_POWERPC_UDBG_H +#define _ASM_POWERPC_UDBG_H +#ifdef __KERNEL__ + +#include +#include + +extern void (*udbg_putc)(char c); +extern int (*udbg_getc)(void); +extern int (*udbg_getc_poll)(void); + +extern void udbg_puts(const char *s); +extern int udbg_write(const char *s, int n); +extern int udbg_read(char *buf, int buflen); + +extern void register_early_udbg_console(void); +extern void udbg_printf(const char *fmt, ...) + __attribute__ ((format (printf, 1, 2))); +extern void udbg_progress(char *s, unsigned short hex); + +extern void udbg_init_uart(void __iomem *comport, unsigned int speed, + unsigned int clock); +extern unsigned int udbg_probe_uart_speed(void __iomem *comport, + unsigned int clock); + +struct device_node; +extern void udbg_scc_init(int force_scc); +extern int udbg_adb_init(int force_btext); +extern void udbg_adb_init_early(void); + +extern void __init udbg_early_init(void); +extern void __init udbg_init_debug_lpar(void); +extern void __init udbg_init_pmac_realmode(void); +extern void __init udbg_init_maple_realmode(void); +extern void __init udbg_init_pas_realmode(void); +extern void __init udbg_init_iseries(void); +extern void __init udbg_init_rtas_panel(void); +extern void __init udbg_init_rtas_console(void); +extern void __init udbg_init_debug_beat(void); +extern void __init udbg_init_btext(void); +extern void __init udbg_init_44x_as1(void); +extern void __init udbg_init_40x_realmode(void); +extern void __init udbg_init_cpm(void); + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_UDBG_H */ diff --git a/arch/powerpc/include/asm/uic.h b/arch/powerpc/include/asm/uic.h new file mode 100644 index 00000000000..597edfcae3d --- /dev/null +++ b/arch/powerpc/include/asm/uic.h @@ -0,0 +1,21 @@ +/* + * IBM PPC4xx UIC external definitions and structure. + * + * Maintainer: David Gibson + * Copyright 2007 IBM Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef _ASM_POWERPC_UIC_H +#define _ASM_POWERPC_UIC_H + +#ifdef __KERNEL__ + +extern void __init uic_init_tree(void); +extern unsigned int uic_get_irq(void); + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_UIC_H */ diff --git a/arch/powerpc/include/asm/unaligned.h b/arch/powerpc/include/asm/unaligned.h new file mode 100644 index 00000000000..5f1b1e3c213 --- /dev/null +++ b/arch/powerpc/include/asm/unaligned.h @@ -0,0 +1,16 @@ +#ifndef _ASM_POWERPC_UNALIGNED_H +#define _ASM_POWERPC_UNALIGNED_H + +#ifdef __KERNEL__ + +/* + * The PowerPC can do unaligned accesses itself in big endian mode. + */ +#include +#include + +#define get_unaligned __get_unaligned_be +#define put_unaligned __put_unaligned_be + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_UNALIGNED_H */ diff --git a/arch/powerpc/include/asm/uninorth.h b/arch/powerpc/include/asm/uninorth.h new file mode 100644 index 00000000000..f737732c386 --- /dev/null +++ b/arch/powerpc/include/asm/uninorth.h @@ -0,0 +1,229 @@ +/* + * uninorth.h: definitions for using the "UniNorth" host bridge chip + * from Apple. This chip is used on "Core99" machines + * This also includes U2 used on more recent MacRISC2/3 + * machines and U3 (G5) + * + */ +#ifdef __KERNEL__ +#ifndef __ASM_UNINORTH_H__ +#define __ASM_UNINORTH_H__ + +/* + * Uni-N and U3 config space reg. definitions + * + * (Little endian) + */ + +/* Address ranges selection. This one should work with Bandit too */ +/* Not U3 */ +#define UNI_N_ADDR_SELECT 0x48 +#define UNI_N_ADDR_COARSE_MASK 0xffff0000 /* 256Mb regions at *0000000 */ +#define UNI_N_ADDR_FINE_MASK 0x0000ffff /* 16Mb regions at f*000000 */ + +/* AGP registers */ +/* Not U3 */ +#define UNI_N_CFG_GART_BASE 0x8c +#define UNI_N_CFG_AGP_BASE 0x90 +#define UNI_N_CFG_GART_CTRL 0x94 +#define UNI_N_CFG_INTERNAL_STATUS 0x98 +#define UNI_N_CFG_GART_DUMMY_PAGE 0xa4 + +/* UNI_N_CFG_GART_CTRL bits definitions */ +#define UNI_N_CFG_GART_INVAL 0x00000001 +#define UNI_N_CFG_GART_ENABLE 0x00000100 +#define UNI_N_CFG_GART_2xRESET 0x00010000 +#define UNI_N_CFG_GART_DISSBADET 0x00020000 +/* The following seems to only be used only on U3 */ +#define U3_N_CFG_GART_SYNCMODE 0x00040000 +#define U3_N_CFG_GART_PERFRD 0x00080000 +#define U3_N_CFG_GART_B2BGNT 0x00200000 +#define U3_N_CFG_GART_FASTDDR 0x00400000 + +/* My understanding of UniNorth AGP as of UniNorth rev 1.0x, + * revision 1.5 (x4 AGP) may need further changes. + * + * AGP_BASE register contains the base address of the AGP aperture on + * the AGP bus. It doesn't seem to be visible to the CPU as of UniNorth 1.x, + * even if decoding of this address range is enabled in the address select + * register. Apparently, the only supported bases are 256Mb multiples + * (high 4 bits of that register). + * + * GART_BASE register appear to contain the physical address of the GART + * in system memory in the high address bits (page aligned), and the + * GART size in the low order bits (number of GART pages) + * + * The GART format itself is one 32bits word per physical memory page. + * This word contains, in little-endian format (!!!), the physical address + * of the page in the high bits, and what appears to be an "enable" bit + * in the LSB bit (0) that must be set to 1 when the entry is valid. + * + * Obviously, the GART is not cache coherent and so any change to it + * must be flushed to memory (or maybe just make the GART space non + * cachable). AGP memory itself doens't seem to be cache coherent neither. + * + * In order to invalidate the GART (which is probably necessary to inval + * the bridge internal TLBs), the following sequence has to be written, + * in order, to the GART_CTRL register: + * + * UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_INVAL + * UNI_N_CFG_GART_ENABLE + * UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_2xRESET + * UNI_N_CFG_GART_ENABLE + * + * As far as AGP "features" are concerned, it looks like fast write may + * not be supported but this has to be confirmed. + * + * Turning on AGP seem to require a double invalidate operation, one before + * setting the AGP command register, on after. + * + * Turning off AGP seems to require the following sequence: first wait + * for the AGP to be idle by reading the internal status register, then + * write in that order to the GART_CTRL register: + * + * UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_INVAL + * 0 + * UNI_N_CFG_GART_2xRESET + * 0 + */ + +/* + * Uni-N memory mapped reg. definitions + * + * Those registers are Big-Endian !! + * + * Their meaning come from either Darwin and/or from experiments I made with + * the bootrom, I'm not sure about their exact meaning yet + * + */ + +/* Version of the UniNorth chip */ +#define UNI_N_VERSION 0x0000 /* Known versions: 3,7 and 8 */ + +#define UNI_N_VERSION_107 0x0003 /* 1.0.7 */ +#define UNI_N_VERSION_10A 0x0007 /* 1.0.10 */ +#define UNI_N_VERSION_150 0x0011 /* 1.5 */ +#define UNI_N_VERSION_200 0x0024 /* 2.0 */ +#define UNI_N_VERSION_PANGEA 0x00C0 /* Integrated U1 + K */ +#define UNI_N_VERSION_INTREPID 0x00D2 /* Integrated U2 + K */ +#define UNI_N_VERSION_300 0x0030 /* 3.0 (U3 on G5) */ + +/* This register is used to enable/disable various clocks */ +#define UNI_N_CLOCK_CNTL 0x0020 +#define UNI_N_CLOCK_CNTL_PCI 0x00000001 /* PCI2 clock control */ +#define UNI_N_CLOCK_CNTL_GMAC 0x00000002 /* GMAC clock control */ +#define UNI_N_CLOCK_CNTL_FW 0x00000004 /* FireWire clock control */ +#define UNI_N_CLOCK_CNTL_ATA100 0x00000010 /* ATA-100 clock control (U2) */ + +/* Power Management control */ +#define UNI_N_POWER_MGT 0x0030 +#define UNI_N_POWER_MGT_NORMAL 0x00 +#define UNI_N_POWER_MGT_IDLE2 0x01 +#define UNI_N_POWER_MGT_SLEEP 0x02 + +/* This register is configured by Darwin depending on the UniN + * revision + */ +#define UNI_N_ARB_CTRL 0x0040 +#define UNI_N_ARB_CTRL_QACK_DELAY_SHIFT 15 +#define UNI_N_ARB_CTRL_QACK_DELAY_MASK 0x0e1f8000 +#define UNI_N_ARB_CTRL_QACK_DELAY 0x30 +#define UNI_N_ARB_CTRL_QACK_DELAY105 0x00 + +/* This one _might_ return the CPU number of the CPU reading it; + * the bootROM decides whether to boot or to sleep/spinloop depending + * on this register beeing 0 or not + */ +#define UNI_N_CPU_NUMBER 0x0050 + +/* This register appear to be read by the bootROM to decide what + * to do on a non-recoverable reset (powerup or wakeup) + */ +#define UNI_N_HWINIT_STATE 0x0070 +#define UNI_N_HWINIT_STATE_SLEEPING 0x01 +#define UNI_N_HWINIT_STATE_RUNNING 0x02 +/* This last bit appear to be used by the bootROM to know the second + * CPU has started and will enter it's sleep loop with IP=0 + */ +#define UNI_N_HWINIT_STATE_CPU1_FLAG 0x10000000 + +/* This register controls AACK delay, which is set when 2004 iBook/PowerBook + * is in low speed mode. + */ +#define UNI_N_AACK_DELAY 0x0100 +#define UNI_N_AACK_DELAY_ENABLE 0x00000001 + +/* Clock status for Intrepid */ +#define UNI_N_CLOCK_STOP_STATUS0 0x0150 +#define UNI_N_CLOCK_STOPPED_EXTAGP 0x00200000 +#define UNI_N_CLOCK_STOPPED_AGPDEL 0x00100000 +#define UNI_N_CLOCK_STOPPED_I2S0_45_49 0x00080000 +#define UNI_N_CLOCK_STOPPED_I2S0_18 0x00040000 +#define UNI_N_CLOCK_STOPPED_I2S1_45_49 0x00020000 +#define UNI_N_CLOCK_STOPPED_I2S1_18 0x00010000 +#define UNI_N_CLOCK_STOPPED_TIMER 0x00008000 +#define UNI_N_CLOCK_STOPPED_SCC_RTCLK18 0x00004000 +#define UNI_N_CLOCK_STOPPED_SCC_RTCLK32 0x00002000 +#define UNI_N_CLOCK_STOPPED_SCC_VIA32 0x00001000 +#define UNI_N_CLOCK_STOPPED_SCC_SLOT0 0x00000800 +#define UNI_N_CLOCK_STOPPED_SCC_SLOT1 0x00000400 +#define UNI_N_CLOCK_STOPPED_SCC_SLOT2 0x00000200 +#define UNI_N_CLOCK_STOPPED_PCI_FBCLKO 0x00000100 +#define UNI_N_CLOCK_STOPPED_VEO0 0x00000080 +#define UNI_N_CLOCK_STOPPED_VEO1 0x00000040 +#define UNI_N_CLOCK_STOPPED_USB0 0x00000020 +#define UNI_N_CLOCK_STOPPED_USB1 0x00000010 +#define UNI_N_CLOCK_STOPPED_USB2 0x00000008 +#define UNI_N_CLOCK_STOPPED_32 0x00000004 +#define UNI_N_CLOCK_STOPPED_45 0x00000002 +#define UNI_N_CLOCK_STOPPED_49 0x00000001 + +#define UNI_N_CLOCK_STOP_STATUS1 0x0160 +#define UNI_N_CLOCK_STOPPED_PLL4REF 0x00080000 +#define UNI_N_CLOCK_STOPPED_CPUDEL 0x00040000 +#define UNI_N_CLOCK_STOPPED_CPU 0x00020000 +#define UNI_N_CLOCK_STOPPED_BUF_REFCKO 0x00010000 +#define UNI_N_CLOCK_STOPPED_PCI2 0x00008000 +#define UNI_N_CLOCK_STOPPED_FW 0x00004000 +#define UNI_N_CLOCK_STOPPED_GB 0x00002000 +#define UNI_N_CLOCK_STOPPED_ATA66 0x00001000 +#define UNI_N_CLOCK_STOPPED_ATA100 0x00000800 +#define UNI_N_CLOCK_STOPPED_MAX 0x00000400 +#define UNI_N_CLOCK_STOPPED_PCI1 0x00000200 +#define UNI_N_CLOCK_STOPPED_KLPCI 0x00000100 +#define UNI_N_CLOCK_STOPPED_USB0PCI 0x00000080 +#define UNI_N_CLOCK_STOPPED_USB1PCI 0x00000040 +#define UNI_N_CLOCK_STOPPED_USB2PCI 0x00000020 +#define UNI_N_CLOCK_STOPPED_7PCI1 0x00000008 +#define UNI_N_CLOCK_STOPPED_AGP 0x00000004 +#define UNI_N_CLOCK_STOPPED_PCI0 0x00000002 +#define UNI_N_CLOCK_STOPPED_18 0x00000001 + +/* Intrepid registe to OF do-platform-clockspreading */ +#define UNI_N_CLOCK_SPREADING 0x190 + +/* Uninorth 1.5 rev. has additional perf. monitor registers at 0xf00-0xf50 */ + + +/* + * U3 specific registers + */ + + +/* U3 Toggle */ +#define U3_TOGGLE_REG 0x00e0 +#define U3_PMC_START_STOP 0x0001 +#define U3_MPIC_RESET 0x0002 +#define U3_MPIC_OUTPUT_ENABLE 0x0004 + +/* U3 API PHY Config 1 */ +#define U3_API_PHY_CONFIG_1 0x23030 + +/* U3 HyperTransport registers */ +#define U3_HT_CONFIG_BASE 0x70000 +#define U3_HT_LINK_COMMAND 0x100 +#define U3_HT_LINK_CONFIG 0x110 +#define U3_HT_LINK_FREQ 0x120 + +#endif /* __ASM_UNINORTH_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h new file mode 100644 index 00000000000..e07d0c76ed7 --- /dev/null +++ b/arch/powerpc/include/asm/unistd.h @@ -0,0 +1,398 @@ +#ifndef _ASM_POWERPC_UNISTD_H_ +#define _ASM_POWERPC_UNISTD_H_ + +/* + * This file contains the system call numbers. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#define __NR_restart_syscall 0 +#define __NR_exit 1 +#define __NR_fork 2 +#define __NR_read 3 +#define __NR_write 4 +#define __NR_open 5 +#define __NR_close 6 +#define __NR_waitpid 7 +#define __NR_creat 8 +#define __NR_link 9 +#define __NR_unlink 10 +#define __NR_execve 11 +#define __NR_chdir 12 +#define __NR_time 13 +#define __NR_mknod 14 +#define __NR_chmod 15 +#define __NR_lchown 16 +#define __NR_break 17 +#define __NR_oldstat 18 +#define __NR_lseek 19 +#define __NR_getpid 20 +#define __NR_mount 21 +#define __NR_umount 22 +#define __NR_setuid 23 +#define __NR_getuid 24 +#define __NR_stime 25 +#define __NR_ptrace 26 +#define __NR_alarm 27 +#define __NR_oldfstat 28 +#define __NR_pause 29 +#define __NR_utime 30 +#define __NR_stty 31 +#define __NR_gtty 32 +#define __NR_access 33 +#define __NR_nice 34 +#define __NR_ftime 35 +#define __NR_sync 36 +#define __NR_kill 37 +#define __NR_rename 38 +#define __NR_mkdir 39 +#define __NR_rmdir 40 +#define __NR_dup 41 +#define __NR_pipe 42 +#define __NR_times 43 +#define __NR_prof 44 +#define __NR_brk 45 +#define __NR_setgid 46 +#define __NR_getgid 47 +#define __NR_signal 48 +#define __NR_geteuid 49 +#define __NR_getegid 50 +#define __NR_acct 51 +#define __NR_umount2 52 +#define __NR_lock 53 +#define __NR_ioctl 54 +#define __NR_fcntl 55 +#define __NR_mpx 56 +#define __NR_setpgid 57 +#define __NR_ulimit 58 +#define __NR_oldolduname 59 +#define __NR_umask 60 +#define __NR_chroot 61 +#define __NR_ustat 62 +#define __NR_dup2 63 +#define __NR_getppid 64 +#define __NR_getpgrp 65 +#define __NR_setsid 66 +#define __NR_sigaction 67 +#define __NR_sgetmask 68 +#define __NR_ssetmask 69 +#define __NR_setreuid 70 +#define __NR_setregid 71 +#define __NR_sigsuspend 72 +#define __NR_sigpending 73 +#define __NR_sethostname 74 +#define __NR_setrlimit 75 +#define __NR_getrlimit 76 +#define __NR_getrusage 77 +#define __NR_gettimeofday 78 +#define __NR_settimeofday 79 +#define __NR_getgroups 80 +#define __NR_setgroups 81 +#define __NR_select 82 +#define __NR_symlink 83 +#define __NR_oldlstat 84 +#define __NR_readlink 85 +#define __NR_uselib 86 +#define __NR_swapon 87 +#define __NR_reboot 88 +#define __NR_readdir 89 +#define __NR_mmap 90 +#define __NR_munmap 91 +#define __NR_truncate 92 +#define __NR_ftruncate 93 +#define __NR_fchmod 94 +#define __NR_fchown 95 +#define __NR_getpriority 96 +#define __NR_setpriority 97 +#define __NR_profil 98 +#define __NR_statfs 99 +#define __NR_fstatfs 100 +#define __NR_ioperm 101 +#define __NR_socketcall 102 +#define __NR_syslog 103 +#define __NR_setitimer 104 +#define __NR_getitimer 105 +#define __NR_stat 106 +#define __NR_lstat 107 +#define __NR_fstat 108 +#define __NR_olduname 109 +#define __NR_iopl 110 +#define __NR_vhangup 111 +#define __NR_idle 112 +#define __NR_vm86 113 +#define __NR_wait4 114 +#define __NR_swapoff 115 +#define __NR_sysinfo 116 +#define __NR_ipc 117 +#define __NR_fsync 118 +#define __NR_sigreturn 119 +#define __NR_clone 120 +#define __NR_setdomainname 121 +#define __NR_uname 122 +#define __NR_modify_ldt 123 +#define __NR_adjtimex 124 +#define __NR_mprotect 125 +#define __NR_sigprocmask 126 +#define __NR_create_module 127 +#define __NR_init_module 128 +#define __NR_delete_module 129 +#define __NR_get_kernel_syms 130 +#define __NR_quotactl 131 +#define __NR_getpgid 132 +#define __NR_fchdir 133 +#define __NR_bdflush 134 +#define __NR_sysfs 135 +#define __NR_personality 136 +#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ +#define __NR_setfsuid 138 +#define __NR_setfsgid 139 +#define __NR__llseek 140 +#define __NR_getdents 141 +#define __NR__newselect 142 +#define __NR_flock 143 +#define __NR_msync 144 +#define __NR_readv 145 +#define __NR_writev 146 +#define __NR_getsid 147 +#define __NR_fdatasync 148 +#define __NR__sysctl 149 +#define __NR_mlock 150 +#define __NR_munlock 151 +#define __NR_mlockall 152 +#define __NR_munlockall 153 +#define __NR_sched_setparam 154 +#define __NR_sched_getparam 155 +#define __NR_sched_setscheduler 156 +#define __NR_sched_getscheduler 157 +#define __NR_sched_yield 158 +#define __NR_sched_get_priority_max 159 +#define __NR_sched_get_priority_min 160 +#define __NR_sched_rr_get_interval 161 +#define __NR_nanosleep 162 +#define __NR_mremap 163 +#define __NR_setresuid 164 +#define __NR_getresuid 165 +#define __NR_query_module 166 +#define __NR_poll 167 +#define __NR_nfsservctl 168 +#define __NR_setresgid 169 +#define __NR_getresgid 170 +#define __NR_prctl 171 +#define __NR_rt_sigreturn 172 +#define __NR_rt_sigaction 173 +#define __NR_rt_sigprocmask 174 +#define __NR_rt_sigpending 175 +#define __NR_rt_sigtimedwait 176 +#define __NR_rt_sigqueueinfo 177 +#define __NR_rt_sigsuspend 178 +#define __NR_pread64 179 +#define __NR_pwrite64 180 +#define __NR_chown 181 +#define __NR_getcwd 182 +#define __NR_capget 183 +#define __NR_capset 184 +#define __NR_sigaltstack 185 +#define __NR_sendfile 186 +#define __NR_getpmsg 187 /* some people actually want streams */ +#define __NR_putpmsg 188 /* some people actually want streams */ +#define __NR_vfork 189 +#define __NR_ugetrlimit 190 /* SuS compliant getrlimit */ +#define __NR_readahead 191 +#ifndef __powerpc64__ /* these are 32-bit only */ +#define __NR_mmap2 192 +#define __NR_truncate64 193 +#define __NR_ftruncate64 194 +#define __NR_stat64 195 +#define __NR_lstat64 196 +#define __NR_fstat64 197 +#endif +#define __NR_pciconfig_read 198 +#define __NR_pciconfig_write 199 +#define __NR_pciconfig_iobase 200 +#define __NR_multiplexer 201 +#define __NR_getdents64 202 +#define __NR_pivot_root 203 +#ifndef __powerpc64__ +#define __NR_fcntl64 204 +#endif +#define __NR_madvise 205 +#define __NR_mincore 206 +#define __NR_gettid 207 +#define __NR_tkill 208 +#define __NR_setxattr 209 +#define __NR_lsetxattr 210 +#define __NR_fsetxattr 211 +#define __NR_getxattr 212 +#define __NR_lgetxattr 213 +#define __NR_fgetxattr 214 +#define __NR_listxattr 215 +#define __NR_llistxattr 216 +#define __NR_flistxattr 217 +#define __NR_removexattr 218 +#define __NR_lremovexattr 219 +#define __NR_fremovexattr 220 +#define __NR_futex 221 +#define __NR_sched_setaffinity 222 +#define __NR_sched_getaffinity 223 +/* 224 currently unused */ +#define __NR_tuxcall 225 +#ifndef __powerpc64__ +#define __NR_sendfile64 226 +#endif +#define __NR_io_setup 227 +#define __NR_io_destroy 228 +#define __NR_io_getevents 229 +#define __NR_io_submit 230 +#define __NR_io_cancel 231 +#define __NR_set_tid_address 232 +#define __NR_fadvise64 233 +#define __NR_exit_group 234 +#define __NR_lookup_dcookie 235 +#define __NR_epoll_create 236 +#define __NR_epoll_ctl 237 +#define __NR_epoll_wait 238 +#define __NR_remap_file_pages 239 +#define __NR_timer_create 240 +#define __NR_timer_settime 241 +#define __NR_timer_gettime 242 +#define __NR_timer_getoverrun 243 +#define __NR_timer_delete 244 +#define __NR_clock_settime 245 +#define __NR_clock_gettime 246 +#define __NR_clock_getres 247 +#define __NR_clock_nanosleep 248 +#define __NR_swapcontext 249 +#define __NR_tgkill 250 +#define __NR_utimes 251 +#define __NR_statfs64 252 +#define __NR_fstatfs64 253 +#ifndef __powerpc64__ +#define __NR_fadvise64_64 254 +#endif +#define __NR_rtas 255 +#define __NR_sys_debug_setcontext 256 +/* Number 257 is reserved for vserver */ +#define __NR_migrate_pages 258 +#define __NR_mbind 259 +#define __NR_get_mempolicy 260 +#define __NR_set_mempolicy 261 +#define __NR_mq_open 262 +#define __NR_mq_unlink 263 +#define __NR_mq_timedsend 264 +#define __NR_mq_timedreceive 265 +#define __NR_mq_notify 266 +#define __NR_mq_getsetattr 267 +#define __NR_kexec_load 268 +#define __NR_add_key 269 +#define __NR_request_key 270 +#define __NR_keyctl 271 +#define __NR_waitid 272 +#define __NR_ioprio_set 273 +#define __NR_ioprio_get 274 +#define __NR_inotify_init 275 +#define __NR_inotify_add_watch 276 +#define __NR_inotify_rm_watch 277 +#define __NR_spu_run 278 +#define __NR_spu_create 279 +#define __NR_pselect6 280 +#define __NR_ppoll 281 +#define __NR_unshare 282 +#define __NR_splice 283 +#define __NR_tee 284 +#define __NR_vmsplice 285 +#define __NR_openat 286 +#define __NR_mkdirat 287 +#define __NR_mknodat 288 +#define __NR_fchownat 289 +#define __NR_futimesat 290 +#ifdef __powerpc64__ +#define __NR_newfstatat 291 +#else +#define __NR_fstatat64 291 +#endif +#define __NR_unlinkat 292 +#define __NR_renameat 293 +#define __NR_linkat 294 +#define __NR_symlinkat 295 +#define __NR_readlinkat 296 +#define __NR_fchmodat 297 +#define __NR_faccessat 298 +#define __NR_get_robust_list 299 +#define __NR_set_robust_list 300 +#define __NR_move_pages 301 +#define __NR_getcpu 302 +#define __NR_epoll_pwait 303 +#define __NR_utimensat 304 +#define __NR_signalfd 305 +#define __NR_timerfd_create 306 +#define __NR_eventfd 307 +#define __NR_sync_file_range2 308 +#define __NR_fallocate 309 +#define __NR_subpage_prot 310 +#define __NR_timerfd_settime 311 +#define __NR_timerfd_gettime 312 +#define __NR_signalfd4 313 +#define __NR_eventfd2 314 +#define __NR_epoll_create1 315 +#define __NR_dup3 316 +#define __NR_pipe2 317 +#define __NR_inotify_init1 318 + +#ifdef __KERNEL__ + +#define __NR_syscalls 319 + +#define __NR__exit __NR_exit +#define NR_syscalls __NR_syscalls + +#ifndef __ASSEMBLY__ + +#include +#include +#include + +#define __ARCH_WANT_IPC_PARSE_VERSION +#define __ARCH_WANT_OLD_READDIR +#define __ARCH_WANT_STAT64 +#define __ARCH_WANT_SYS_ALARM +#define __ARCH_WANT_SYS_GETHOSTNAME +#define __ARCH_WANT_SYS_PAUSE +#define __ARCH_WANT_SYS_SGETMASK +#define __ARCH_WANT_SYS_SIGNAL +#define __ARCH_WANT_SYS_TIME +#define __ARCH_WANT_SYS_UTIME +#define __ARCH_WANT_SYS_WAITPID +#define __ARCH_WANT_SYS_SOCKETCALL +#define __ARCH_WANT_SYS_FADVISE64 +#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_LLSEEK +#define __ARCH_WANT_SYS_NICE +#define __ARCH_WANT_SYS_OLD_GETRLIMIT +#define __ARCH_WANT_SYS_OLDUMOUNT +#define __ARCH_WANT_SYS_SIGPENDING +#define __ARCH_WANT_SYS_SIGPROCMASK +#define __ARCH_WANT_SYS_RT_SIGACTION +#define __ARCH_WANT_SYS_RT_SIGSUSPEND +#ifdef CONFIG_PPC32 +#define __ARCH_WANT_OLD_STAT +#endif +#ifdef CONFIG_PPC64 +#define __ARCH_WANT_COMPAT_SYS_TIME +#define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND +#define __ARCH_WANT_SYS_NEWFSTATAT +#endif + +/* + * "Conditional" syscalls + */ +#define cond_syscall(x) \ + asmlinkage long x (void) __attribute__((weak,alias("sys_ni_syscall"))) + +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ + +#endif /* _ASM_POWERPC_UNISTD_H_ */ diff --git a/arch/powerpc/include/asm/user.h b/arch/powerpc/include/asm/user.h new file mode 100644 index 00000000000..3fd4545dd74 --- /dev/null +++ b/arch/powerpc/include/asm/user.h @@ -0,0 +1,51 @@ +#ifndef _ASM_POWERPC_USER_H +#define _ASM_POWERPC_USER_H + +#include +#include + +/* + * Adapted from + * + * Core file format: The core file is written in such a way that gdb + * can understand it and provide useful information to the user (under + * linux we use the `trad-core' bfd, NOT the osf-core). The file contents + * are as follows: + * + * upage: 1 page consisting of a user struct that tells gdb + * what is present in the file. Directly after this is a + * copy of the task_struct, which is currently not used by gdb, + * but it may come in handy at some point. All of the registers + * are stored as part of the upage. The upage should always be + * only one page long. + * data: The data segment follows next. We use current->end_text to + * current->brk to pick up all of the user variables, plus any memory + * that may have been sbrk'ed. No attempt is made to determine if a + * page is demand-zero or if a page is totally unused, we just cover + * the entire range. All of the addresses are rounded in such a way + * that an integral number of pages is written. + * stack: We need the stack information in order to get a meaningful + * backtrace. We need to write the data from usp to + * current->start_stack, so we round each of these in order to be able + * to write an integer number of pages. + */ +struct user { + struct pt_regs regs; /* entire machine state */ + size_t u_tsize; /* text size (pages) */ + size_t u_dsize; /* data size (pages) */ + size_t u_ssize; /* stack size (pages) */ + unsigned long start_code; /* text starting address */ + unsigned long start_data; /* data starting address */ + unsigned long start_stack; /* stack starting address */ + long int signal; /* signal causing core dump */ + unsigned long u_ar0; /* help gdb find registers */ + unsigned long magic; /* identifies a core file */ + char u_comm[32]; /* user command name */ +}; + +#define NBPG PAGE_SIZE +#define UPAGES 1 +#define HOST_TEXT_START_ADDR (u.start_code) +#define HOST_DATA_START_ADDR (u.start_data) +#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) +#endif /* _ASM_POWERPC_USER_H */ diff --git a/arch/powerpc/include/asm/vdso.h b/arch/powerpc/include/asm/vdso.h new file mode 100644 index 00000000000..26fc449bd98 --- /dev/null +++ b/arch/powerpc/include/asm/vdso.h @@ -0,0 +1,78 @@ +#ifndef __PPC64_VDSO_H__ +#define __PPC64_VDSO_H__ + +#ifdef __KERNEL__ + +/* Default link addresses for the vDSOs */ +#define VDSO32_LBASE 0x100000 +#define VDSO64_LBASE 0x100000 + +/* Default map addresses */ +#define VDSO32_MBASE VDSO32_LBASE +#define VDSO64_MBASE VDSO64_LBASE + +#define VDSO_VERSION_STRING LINUX_2.6.15 + +/* Define if 64 bits VDSO has procedure descriptors */ +#undef VDS64_HAS_DESCRIPTORS + +#ifndef __ASSEMBLY__ + +/* Offsets relative to thread->vdso_base */ +extern unsigned long vdso64_rt_sigtramp; +extern unsigned long vdso32_sigtramp; +extern unsigned long vdso32_rt_sigtramp; + +#else /* __ASSEMBLY__ */ + +#ifdef __VDSO64__ +#ifdef VDS64_HAS_DESCRIPTORS +#define V_FUNCTION_BEGIN(name) \ + .globl name; \ + .section ".opd","a"; \ + .align 3; \ + name: \ + .quad .name,.TOC.@tocbase,0; \ + .previous; \ + .globl .name; \ + .type .name,@function; \ + .name: \ + +#define V_FUNCTION_END(name) \ + .size .name,.-.name; + +#define V_LOCAL_FUNC(name) (.name) + +#else /* VDS64_HAS_DESCRIPTORS */ + +#define V_FUNCTION_BEGIN(name) \ + .globl name; \ + name: \ + +#define V_FUNCTION_END(name) \ + .size name,.-name; + +#define V_LOCAL_FUNC(name) (name) + +#endif /* VDS64_HAS_DESCRIPTORS */ +#endif /* __VDSO64__ */ + +#ifdef __VDSO32__ + +#define V_FUNCTION_BEGIN(name) \ + .globl name; \ + .type name,@function; \ + name: \ + +#define V_FUNCTION_END(name) \ + .size name,.-name; + +#define V_LOCAL_FUNC(name) (name) + +#endif /* __VDSO32__ */ + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* __PPC64_VDSO_H__ */ diff --git a/arch/powerpc/include/asm/vdso_datapage.h b/arch/powerpc/include/asm/vdso_datapage.h new file mode 100644 index 00000000000..f01393224b5 --- /dev/null +++ b/arch/powerpc/include/asm/vdso_datapage.h @@ -0,0 +1,121 @@ +#ifndef _VDSO_DATAPAGE_H +#define _VDSO_DATAPAGE_H +#ifdef __KERNEL__ + +/* + * Copyright (C) 2002 Peter Bergner , IBM + * Copyright (C) 2005 Benjamin Herrenschmidy , + * IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + + +/* + * Note about this structure: + * + * This structure was historically called systemcfg and exposed to + * userland via /proc/ppc64/systemcfg. Unfortunately, this became an + * ABI issue as some proprietary software started relying on being able + * to mmap() it, thus we have to keep the base layout at least for a + * few kernel versions. + * + * However, since ppc32 doesn't suffer from this backward handicap, + * a simpler version of the data structure is used there with only the + * fields actually used by the vDSO. + * + */ + +/* + * If the major version changes we are incompatible. + * Minor version changes are a hint. + */ +#define SYSTEMCFG_MAJOR 1 +#define SYSTEMCFG_MINOR 1 + +#ifndef __ASSEMBLY__ + +#include + +#define SYSCALL_MAP_SIZE ((__NR_syscalls + 31) / 32) + +/* + * So here is the ppc64 backward compatible version + */ + +#ifdef CONFIG_PPC64 + +struct vdso_data { + __u8 eye_catcher[16]; /* Eyecatcher: SYSTEMCFG:PPC64 0x00 */ + struct { /* Systemcfg version numbers */ + __u32 major; /* Major number 0x10 */ + __u32 minor; /* Minor number 0x14 */ + } version; + + /* Note about the platform flags: it now only contains the lpar + * bit. The actual platform number is dead and burried + */ + __u32 platform; /* Platform flags 0x18 */ + __u32 processor; /* Processor type 0x1C */ + __u64 processorCount; /* # of physical processors 0x20 */ + __u64 physicalMemorySize; /* Size of real memory(B) 0x28 */ + __u64 tb_orig_stamp; /* Timebase at boot 0x30 */ + __u64 tb_ticks_per_sec; /* Timebase tics / sec 0x38 */ + __u64 tb_to_xs; /* Inverse of TB to 2^20 0x40 */ + __u64 stamp_xsec; /* 0x48 */ + __u64 tb_update_count; /* Timebase atomicity ctr 0x50 */ + __u32 tz_minuteswest; /* Minutes west of Greenwich 0x58 */ + __u32 tz_dsttime; /* Type of dst correction 0x5C */ + __u32 dcache_size; /* L1 d-cache size 0x60 */ + __u32 dcache_line_size; /* L1 d-cache line size 0x64 */ + __u32 icache_size; /* L1 i-cache size 0x68 */ + __u32 icache_line_size; /* L1 i-cache line size 0x6C */ + + /* those additional ones don't have to be located anywhere + * special as they were not part of the original systemcfg + */ + __u32 dcache_block_size; /* L1 d-cache block size */ + __u32 icache_block_size; /* L1 i-cache block size */ + __u32 dcache_log_block_size; /* L1 d-cache log block size */ + __u32 icache_log_block_size; /* L1 i-cache log block size */ + __s32 wtom_clock_sec; /* Wall to monotonic clock */ + __s32 wtom_clock_nsec; + __u32 syscall_map_64[SYSCALL_MAP_SIZE]; /* map of syscalls */ + __u32 syscall_map_32[SYSCALL_MAP_SIZE]; /* map of syscalls */ +}; + +#else /* CONFIG_PPC64 */ + +/* + * And here is the simpler 32 bits version + */ +struct vdso_data { + __u64 tb_orig_stamp; /* Timebase at boot 0x30 */ + __u64 tb_ticks_per_sec; /* Timebase tics / sec 0x38 */ + __u64 tb_to_xs; /* Inverse of TB to 2^20 0x40 */ + __u64 stamp_xsec; /* 0x48 */ + __u32 tb_update_count; /* Timebase atomicity ctr 0x50 */ + __u32 tz_minuteswest; /* Minutes west of Greenwich 0x58 */ + __u32 tz_dsttime; /* Type of dst correction 0x5C */ + __s32 wtom_clock_sec; /* Wall to monotonic clock */ + __s32 wtom_clock_nsec; + __u32 syscall_map_32[SYSCALL_MAP_SIZE]; /* map of syscalls */ + __u32 dcache_block_size; /* L1 d-cache block size */ + __u32 icache_block_size; /* L1 i-cache block size */ + __u32 dcache_log_block_size; /* L1 d-cache log block size */ + __u32 icache_log_block_size; /* L1 i-cache log block size */ +}; + +#endif /* CONFIG_PPC64 */ + +#ifdef __KERNEL__ +extern struct vdso_data *vdso_data; +#endif + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ +#endif /* _SYSTEMCFG_H */ diff --git a/arch/powerpc/include/asm/vga.h b/arch/powerpc/include/asm/vga.h new file mode 100644 index 00000000000..a2eac409c1e --- /dev/null +++ b/arch/powerpc/include/asm/vga.h @@ -0,0 +1,53 @@ +#ifndef _ASM_POWERPC_VGA_H_ +#define _ASM_POWERPC_VGA_H_ + +#ifdef __KERNEL__ + +/* + * Access to VGA videoram + * + * (c) 1998 Martin Mares + */ + + +#include + + +#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_MDA_CONSOLE) + +#define VT_BUF_HAVE_RW +/* + * These are only needed for supporting VGA or MDA text mode, which use little + * endian byte ordering. + * In other cases, we can optimize by using native byte ordering and + * has already done the right job for us. + */ + +static inline void scr_writew(u16 val, volatile u16 *addr) +{ + st_le16(addr, val); +} + +static inline u16 scr_readw(volatile const u16 *addr) +{ + return ld_le16(addr); +} + +#define VT_BUF_HAVE_MEMCPYW +#define scr_memcpyw memcpy + +#endif /* !CONFIG_VGA_CONSOLE && !CONFIG_MDA_CONSOLE */ + +extern unsigned long vgacon_remap_base; + +#ifdef __powerpc64__ +#define VGA_MAP_MEM(x,s) ((unsigned long) ioremap((x), s)) +#else +#define VGA_MAP_MEM(x,s) (x + vgacon_remap_base) +#endif + +#define vga_readb(x) (*(x)) +#define vga_writeb(x,y) (*(y) = (x)) + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_VGA_H_ */ diff --git a/arch/powerpc/include/asm/vio.h b/arch/powerpc/include/asm/vio.h new file mode 100644 index 00000000000..0a290a19594 --- /dev/null +++ b/arch/powerpc/include/asm/vio.h @@ -0,0 +1,118 @@ +/* + * IBM PowerPC Virtual I/O Infrastructure Support. + * + * Copyright (c) 2003 IBM Corp. + * Dave Engebretsen engebret@us.ibm.com + * Santiago Leon santil@us.ibm.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_POWERPC_VIO_H +#define _ASM_POWERPC_VIO_H +#ifdef __KERNEL__ + +#include +#include +#include +#include +#include + +#include +#include + +/* + * Architecture-specific constants for drivers to + * extract attributes of the device using vio_get_attribute() + */ +#define VETH_MAC_ADDR "local-mac-address" +#define VETH_MCAST_FILTER_SIZE "ibm,mac-address-filters" + +/* End architecture-specific constants */ + +#define h_vio_signal(ua, mode) \ + plpar_hcall_norets(H_VIO_SIGNAL, ua, mode) + +#define VIO_IRQ_DISABLE 0UL +#define VIO_IRQ_ENABLE 1UL + +/* + * VIO CMO minimum entitlement for all devices and spare entitlement + */ +#define VIO_CMO_MIN_ENT 1562624 + +struct iommu_table; + +/** + * vio_dev - This structure is used to describe virtual I/O devices. + * + * @desired: set from return of driver's get_desired_dma() function + * @entitled: bytes of IO data that has been reserved for this device. + * @allocated: bytes of IO data currently in use by the device. + * @allocs_failed: number of DMA failures due to insufficient entitlement. + */ +struct vio_dev { + const char *name; + const char *type; + uint32_t unit_address; + unsigned int irq; + struct { + size_t desired; + size_t entitled; + size_t allocated; + atomic_t allocs_failed; + } cmo; + struct device dev; +}; + +struct vio_driver { + const struct vio_device_id *id_table; + int (*probe)(struct vio_dev *dev, const struct vio_device_id *id); + int (*remove)(struct vio_dev *dev); + /* A driver must have a get_desired_dma() function to + * be loaded in a CMO environment if it uses DMA. + */ + unsigned long (*get_desired_dma)(struct vio_dev *dev); + struct device_driver driver; +}; + +extern int vio_register_driver(struct vio_driver *drv); +extern void vio_unregister_driver(struct vio_driver *drv); + +extern int vio_cmo_entitlement_update(size_t); +extern void vio_cmo_set_dev_desired(struct vio_dev *viodev, size_t desired); + +extern void __devinit vio_unregister_device(struct vio_dev *dev); + +struct device_node; + +extern struct vio_dev *vio_register_device_node( + struct device_node *node_vdev); +extern const void *vio_get_attribute(struct vio_dev *vdev, char *which, + int *length); +#ifdef CONFIG_PPC_PSERIES +extern struct vio_dev *vio_find_node(struct device_node *vnode); +extern int vio_enable_interrupts(struct vio_dev *dev); +extern int vio_disable_interrupts(struct vio_dev *dev); +#else +static inline int vio_enable_interrupts(struct vio_dev *dev) +{ + return 0; +} +#endif + +static inline struct vio_driver *to_vio_driver(struct device_driver *drv) +{ + return container_of(drv, struct vio_driver, driver); +} + +static inline struct vio_dev *to_vio_dev(struct device *dev) +{ + return container_of(dev, struct vio_dev, dev); +} + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_VIO_H */ diff --git a/arch/powerpc/include/asm/xilinx_intc.h b/arch/powerpc/include/asm/xilinx_intc.h new file mode 100644 index 00000000000..343612f8fec --- /dev/null +++ b/arch/powerpc/include/asm/xilinx_intc.h @@ -0,0 +1,20 @@ +/* + * Xilinx intc external definitions + * + * Copyright 2007 Secret Lab Technologies Ltd. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef _ASM_POWERPC_XILINX_INTC_H +#define _ASM_POWERPC_XILINX_INTC_H + +#ifdef __KERNEL__ + +extern void __init xilinx_intc_init_tree(void); +extern unsigned int xilinx_intc_get_irq(void); + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_XILINX_INTC_H */ diff --git a/arch/powerpc/include/asm/xmon.h b/arch/powerpc/include/asm/xmon.h new file mode 100644 index 00000000000..5eb8e599e5c --- /dev/null +++ b/arch/powerpc/include/asm/xmon.h @@ -0,0 +1,33 @@ +#ifndef __ASM_POWERPC_XMON_H +#define __ASM_POWERPC_XMON_H + +/* + * Copyrignt (C) 2006 IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifdef __KERNEL__ + +#include + +#ifdef CONFIG_XMON +extern void xmon_setup(void); +extern void xmon_register_spus(struct list_head *list); +struct pt_regs; +extern int xmon(struct pt_regs *excp); +extern irqreturn_t xmon_irq(int, void *); +#else +static inline void xmon_setup(void) { }; +static inline void xmon_register_spus(struct list_head *list) { }; +#endif + +#if defined(CONFIG_XMON) && defined(CONFIG_SMP) +extern int cpus_are_in_xmon(void); +#endif + +#endif /* __KERNEL __ */ +#endif /* __ASM_POWERPC_XMON_H */ diff --git a/arch/powerpc/include/asm/xor.h b/arch/powerpc/include/asm/xor.h new file mode 100644 index 00000000000..c82eb12a5b1 --- /dev/null +++ b/arch/powerpc/include/asm/xor.h @@ -0,0 +1 @@ +#include diff --git a/arch/powerpc/mm/tlb_64.c b/arch/powerpc/mm/tlb_64.c index 409fcc7b63c..be7dd422c0f 100644 --- a/arch/powerpc/mm/tlb_64.c +++ b/arch/powerpc/mm/tlb_64.c @@ -34,7 +34,7 @@ DEFINE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch); /* This is declared as we are using the more or less generic - * include/asm-powerpc/tlb.h file -- tgall + * arch/powerpc/include/asm/tlb.h file -- tgall */ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); static DEFINE_PER_CPU(struct pte_freelist_batch *, pte_freelist_cur); diff --git a/arch/powerpc/platforms/86xx/mpc86xx_smp.c b/arch/powerpc/platforms/86xx/mpc86xx_smp.c index 835f2dc24dc..014e26cda08 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_smp.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_smp.c @@ -19,7 +19,7 @@ #include #include #include -#include +#include #include #include -- cgit v1.2.3 From fb61063587982b52304d62cdbb6a0a88d26ae7ef Mon Sep 17 00:00:00 2001 From: Tony Breeds Date: Thu, 31 Jul 2008 13:51:42 +1000 Subject: powerpc: Fix compiler warning in arch/powerpc/mm/mem.c Explicitly cast to unsigned long long, rather than u64. Signed-off-by: Tony Breeds Signed-off-by: Paul Mackerras --- arch/powerpc/mm/mem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 702691cb9e8..1c93c255873 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -311,7 +311,7 @@ void __init paging_init(void) #endif /* CONFIG_HIGHMEM */ printk(KERN_DEBUG "Top of RAM: 0x%llx, Total RAM: 0x%lx\n", - (u64)top_of_ram, total_ram); + (unsigned long long)top_of_ram, total_ram); printk(KERN_DEBUG "Memory hole size: %ldMB\n", (long int)((top_of_ram - total_ram) >> 20)); memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); -- cgit v1.2.3 From c7c8eede2739289df02a1ab297cc476c6f38dca7 Mon Sep 17 00:00:00 2001 From: Tony Breeds Date: Fri, 1 Aug 2008 11:38:39 +1000 Subject: powerpc: Force printing of 'total_memory' to unsigned long long total_memory is a 'phys_addr_t', Which can be either 64 or 32 bits. Force printing as unsigned long long to silence the warning. Signed-off-by: Tony Breeds Signed-off-by: Paul Mackerras --- arch/powerpc/mm/ppc_mmu_32.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c index c53145f6194..6aa12081377 100644 --- a/arch/powerpc/mm/ppc_mmu_32.c +++ b/arch/powerpc/mm/ppc_mmu_32.c @@ -236,8 +236,8 @@ void __init MMU_init_hw(void) Hash_end = (struct hash_pte *) ((unsigned long)Hash + Hash_size); - printk("Total memory = %ldMB; using %ldkB for hash table (at %p)\n", - total_memory >> 20, Hash_size >> 10, Hash); + printk("Total memory = %lldMB; using %ldkB for hash table (at %p)\n", + (unsigned long long)(total_memory >> 20), Hash_size >> 10, Hash); /* -- cgit v1.2.3 From 9c4cb82515130c62224e23fdf7c13c8f6c59c614 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 2 Aug 2008 02:44:11 +1000 Subject: powerpc: Remove use of CONFIG_PPC_MERGE Now that arch/ppc is gone and CONFIG_PPC_MERGE is always set, remove the dead code associated with !CONFIG_PPC_MERGE from arch/powerpc and include/asm-powerpc. Signed-off-by: Kumar Gala Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig.debug | 2 +- arch/powerpc/include/asm/dcr.h | 6 +- arch/powerpc/include/asm/i8259.h | 5 - arch/powerpc/include/asm/ipic.h | 7 - arch/powerpc/include/asm/irq.h | 288 ------------------------------- arch/powerpc/kernel/Makefile | 14 -- arch/powerpc/kernel/cpu_setup_44x.S | 6 - arch/powerpc/kernel/irq.c | 25 +-- arch/powerpc/kernel/process.c | 2 - arch/powerpc/kernel/vdso.c | 2 - arch/powerpc/lib/Makefile | 2 - arch/powerpc/platforms/52xx/Makefile | 4 +- arch/powerpc/platforms/Makefile | 6 - arch/powerpc/platforms/powermac/Makefile | 3 +- arch/powerpc/sysdev/Makefile | 2 - 15 files changed, 6 insertions(+), 368 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index 8c8aadbe956..4ebc52a19f0 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -97,7 +97,7 @@ config IRQSTACKS config VIRQ_DEBUG bool "Expose hardware/virtual IRQ mapping via debugfs" - depends on DEBUG_FS && PPC_MERGE + depends on DEBUG_FS help This option will show the mapping relationship between hardware irq numbers and virtual irq numbers. The mapping is exposed via debugfs diff --git a/arch/powerpc/include/asm/dcr.h b/arch/powerpc/include/asm/dcr.h index 53b283050ab..d13fb68bb5c 100644 --- a/arch/powerpc/include/asm/dcr.h +++ b/arch/powerpc/include/asm/dcr.h @@ -65,17 +65,13 @@ typedef dcr_host_mmio_t dcr_host_t; #endif /* defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO) */ /* - * On CONFIG_PPC_MERGE, we have additional helpers to read the DCR - * base from the device-tree + * additional helpers to read the DCR * base from the device-tree */ -#ifdef CONFIG_PPC_MERGE struct device_node; extern unsigned int dcr_resource_start(struct device_node *np, unsigned int index); extern unsigned int dcr_resource_len(struct device_node *np, unsigned int index); -#endif /* CONFIG_PPC_MERGE */ - #endif /* CONFIG_PPC_DCR */ #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/i8259.h b/arch/powerpc/include/asm/i8259.h index db1362f8c60..105ade297aa 100644 --- a/arch/powerpc/include/asm/i8259.h +++ b/arch/powerpc/include/asm/i8259.h @@ -4,14 +4,9 @@ #include -#ifdef CONFIG_PPC_MERGE extern void i8259_init(struct device_node *node, unsigned long intack_addr); extern unsigned int i8259_irq(void); extern struct irq_host *i8259_get_host(void); -#else -extern void i8259_init(unsigned long intack_addr, int offset); -extern int i8259_irq(void); -#endif #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_I8259_H */ diff --git a/arch/powerpc/include/asm/ipic.h b/arch/powerpc/include/asm/ipic.h index 4cf35531c0e..fb59829983b 100644 --- a/arch/powerpc/include/asm/ipic.h +++ b/arch/powerpc/include/asm/ipic.h @@ -77,15 +77,8 @@ extern void ipic_disable_mcp(enum ipic_mcp_irq mcp_irq); extern u32 ipic_get_mcp_status(void); extern void ipic_clear_mcp_status(u32 mask); -#ifdef CONFIG_PPC_MERGE extern struct ipic * ipic_init(struct device_node *node, unsigned int flags); extern unsigned int ipic_get_irq(void); -#else -extern void ipic_init(phys_addr_t phys_addr, unsigned int flags, - unsigned int irq_offset, - unsigned char *senses, unsigned int senses_count); -extern int ipic_get_irq(void); -#endif #endif /* __ASM_IPIC_H__ */ #endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h index 1ef8e304e0e..a372f76836c 100644 --- a/arch/powerpc/include/asm/irq.h +++ b/arch/powerpc/include/asm/irq.h @@ -25,8 +25,6 @@ extern atomic_t ppc_n_lost_interrupts; -#ifdef CONFIG_PPC_MERGE - /* This number is used when no interrupt has been assigned */ #define NO_IRQ (0) @@ -326,292 +324,6 @@ static __inline__ int irq_canonicalize(int irq) return irq; } - -#else /* CONFIG_PPC_MERGE */ - -/* This number is used when no interrupt has been assigned */ -#define NO_IRQ (-1) -#define NO_IRQ_IGNORE (-2) - - -/* - * These constants are used for passing information about interrupt - * signal polarity and level/edge sensing to the low-level PIC chip - * drivers. - */ -#define IRQ_SENSE_MASK 0x1 -#define IRQ_SENSE_LEVEL 0x1 /* interrupt on active level */ -#define IRQ_SENSE_EDGE 0x0 /* interrupt triggered by edge */ - -#define IRQ_POLARITY_MASK 0x2 -#define IRQ_POLARITY_POSITIVE 0x2 /* high level or low->high edge */ -#define IRQ_POLARITY_NEGATIVE 0x0 /* low level or high->low edge */ - - -#if defined(CONFIG_40x) -#include - -#ifndef NR_BOARD_IRQS -#define NR_BOARD_IRQS 0 -#endif - -#ifndef UIC_WIDTH /* Number of interrupts per device */ -#define UIC_WIDTH 32 -#endif - -#ifndef NR_UICS /* number of UIC devices */ -#define NR_UICS 1 -#endif - -#if defined (CONFIG_403) -/* - * The PowerPC 403 cores' Asynchronous Interrupt Controller (AIC) has - * 32 possible interrupts, a majority of which are not implemented on - * all cores. There are six configurable, external interrupt pins and - * there are eight internal interrupts for the on-chip serial port - * (SPU), DMA controller, and JTAG controller. - * - */ - -#define NR_AIC_IRQS 32 -#define NR_IRQS (NR_AIC_IRQS + NR_BOARD_IRQS) - -#elif !defined (CONFIG_403) - -/* - * The PowerPC 405 cores' Universal Interrupt Controller (UIC) has 32 - * possible interrupts as well. There are seven, configurable external - * interrupt pins and there are 17 internal interrupts for the on-chip - * serial port, DMA controller, on-chip Ethernet controller, PCI, etc. - * - */ - - -#define NR_UIC_IRQS UIC_WIDTH -#define NR_IRQS ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS) -#endif - -#elif defined(CONFIG_44x) -#include - -#define NR_UIC_IRQS 32 -#define NR_IRQS ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS) - -#elif defined(CONFIG_8xx) - -/* Now include the board configuration specific associations. -*/ -#include - -/* The MPC8xx cores have 16 possible interrupts. There are eight - * possible level sensitive interrupts assigned and generated internally - * from such devices as CPM, PCMCIA, RTC, PIT, TimeBase and Decrementer. - * There are eight external interrupts (IRQs) that can be configured - * as either level or edge sensitive. - * - * On some implementations, there is also the possibility of an 8259 - * through the PCI and PCI-ISA bridges. - * - * We are "flattening" the interrupt vectors of the cascaded CPM - * and 8259 interrupt controllers so that we can uniquely identify - * any interrupt source with a single integer. - */ -#define NR_SIU_INTS 16 -#define NR_CPM_INTS 32 -#ifndef NR_8259_INTS -#define NR_8259_INTS 0 -#endif - -#define SIU_IRQ_OFFSET 0 -#define CPM_IRQ_OFFSET (SIU_IRQ_OFFSET + NR_SIU_INTS) -#define I8259_IRQ_OFFSET (CPM_IRQ_OFFSET + NR_CPM_INTS) - -#define NR_IRQS (NR_SIU_INTS + NR_CPM_INTS + NR_8259_INTS) - -/* These values must be zero-based and map 1:1 with the SIU configuration. - * They are used throughout the 8xx I/O subsystem to generate - * interrupt masks, flags, and other control patterns. This is why the - * current kernel assumption of the 8259 as the base controller is such - * a pain in the butt. - */ -#define SIU_IRQ0 (0) /* Highest priority */ -#define SIU_LEVEL0 (1) -#define SIU_IRQ1 (2) -#define SIU_LEVEL1 (3) -#define SIU_IRQ2 (4) -#define SIU_LEVEL2 (5) -#define SIU_IRQ3 (6) -#define SIU_LEVEL3 (7) -#define SIU_IRQ4 (8) -#define SIU_LEVEL4 (9) -#define SIU_IRQ5 (10) -#define SIU_LEVEL5 (11) -#define SIU_IRQ6 (12) -#define SIU_LEVEL6 (13) -#define SIU_IRQ7 (14) -#define SIU_LEVEL7 (15) - -#define MPC8xx_INT_FEC1 SIU_LEVEL1 -#define MPC8xx_INT_FEC2 SIU_LEVEL3 - -#define MPC8xx_INT_SCC1 (CPM_IRQ_OFFSET + CPMVEC_SCC1) -#define MPC8xx_INT_SCC2 (CPM_IRQ_OFFSET + CPMVEC_SCC2) -#define MPC8xx_INT_SCC3 (CPM_IRQ_OFFSET + CPMVEC_SCC3) -#define MPC8xx_INT_SCC4 (CPM_IRQ_OFFSET + CPMVEC_SCC4) -#define MPC8xx_INT_SMC1 (CPM_IRQ_OFFSET + CPMVEC_SMC1) -#define MPC8xx_INT_SMC2 (CPM_IRQ_OFFSET + CPMVEC_SMC2) - -/* The internal interrupts we can configure as we see fit. - * My personal preference is CPM at level 2, which puts it above the - * MBX PCI/ISA/IDE interrupts. - */ -#ifndef PIT_INTERRUPT -#define PIT_INTERRUPT SIU_LEVEL0 -#endif -#ifndef CPM_INTERRUPT -#define CPM_INTERRUPT SIU_LEVEL2 -#endif -#ifndef PCMCIA_INTERRUPT -#define PCMCIA_INTERRUPT SIU_LEVEL6 -#endif -#ifndef DEC_INTERRUPT -#define DEC_INTERRUPT SIU_LEVEL7 -#endif - -/* Some internal interrupt registers use an 8-bit mask for the interrupt - * level instead of a number. - */ -#define mk_int_int_mask(IL) (1 << (7 - (IL/2))) - -#else /* CONFIG_40x + CONFIG_8xx */ -/* - * this is the # irq's for all ppc arch's (pmac/chrp/prep) - * so it is the max of them all - */ -#define NR_IRQS 256 -#define __DO_IRQ_CANON 1 - -#ifndef CONFIG_8260 - -#define NUM_8259_INTERRUPTS 16 - -#else /* CONFIG_8260 */ - -/* The 8260 has an internal interrupt controller with a maximum of - * 64 IRQs. We will use NR_IRQs from above since it is large enough. - * Don't be confused by the 8260 documentation where they list an - * "interrupt number" and "interrupt vector". We are only interested - * in the interrupt vector. There are "reserved" holes where the - * vector number increases, but the interrupt number in the table does not. - * (Document errata updates have fixed this...make sure you have up to - * date processor documentation -- Dan). - */ - -#ifndef CPM_IRQ_OFFSET -#define CPM_IRQ_OFFSET 0 -#endif - -#define NR_CPM_INTS 64 - -#define SIU_INT_ERROR ((uint)0x00 + CPM_IRQ_OFFSET) -#define SIU_INT_I2C ((uint)0x01 + CPM_IRQ_OFFSET) -#define SIU_INT_SPI ((uint)0x02 + CPM_IRQ_OFFSET) -#define SIU_INT_RISC ((uint)0x03 + CPM_IRQ_OFFSET) -#define SIU_INT_SMC1 ((uint)0x04 + CPM_IRQ_OFFSET) -#define SIU_INT_SMC2 ((uint)0x05 + CPM_IRQ_OFFSET) -#define SIU_INT_IDMA1 ((uint)0x06 + CPM_IRQ_OFFSET) -#define SIU_INT_IDMA2 ((uint)0x07 + CPM_IRQ_OFFSET) -#define SIU_INT_IDMA3 ((uint)0x08 + CPM_IRQ_OFFSET) -#define SIU_INT_IDMA4 ((uint)0x09 + CPM_IRQ_OFFSET) -#define SIU_INT_SDMA ((uint)0x0a + CPM_IRQ_OFFSET) -#define SIU_INT_USB ((uint)0x0b + CPM_IRQ_OFFSET) -#define SIU_INT_TIMER1 ((uint)0x0c + CPM_IRQ_OFFSET) -#define SIU_INT_TIMER2 ((uint)0x0d + CPM_IRQ_OFFSET) -#define SIU_INT_TIMER3 ((uint)0x0e + CPM_IRQ_OFFSET) -#define SIU_INT_TIMER4 ((uint)0x0f + CPM_IRQ_OFFSET) -#define SIU_INT_TMCNT ((uint)0x10 + CPM_IRQ_OFFSET) -#define SIU_INT_PIT ((uint)0x11 + CPM_IRQ_OFFSET) -#define SIU_INT_PCI ((uint)0x12 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ1 ((uint)0x13 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ2 ((uint)0x14 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ3 ((uint)0x15 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ4 ((uint)0x16 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ5 ((uint)0x17 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ6 ((uint)0x18 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ7 ((uint)0x19 + CPM_IRQ_OFFSET) -#define SIU_INT_FCC1 ((uint)0x20 + CPM_IRQ_OFFSET) -#define SIU_INT_FCC2 ((uint)0x21 + CPM_IRQ_OFFSET) -#define SIU_INT_FCC3 ((uint)0x22 + CPM_IRQ_OFFSET) -#define SIU_INT_MCC1 ((uint)0x24 + CPM_IRQ_OFFSET) -#define SIU_INT_MCC2 ((uint)0x25 + CPM_IRQ_OFFSET) -#define SIU_INT_SCC1 ((uint)0x28 + CPM_IRQ_OFFSET) -#define SIU_INT_SCC2 ((uint)0x29 + CPM_IRQ_OFFSET) -#define SIU_INT_SCC3 ((uint)0x2a + CPM_IRQ_OFFSET) -#define SIU_INT_SCC4 ((uint)0x2b + CPM_IRQ_OFFSET) -#define SIU_INT_PC15 ((uint)0x30 + CPM_IRQ_OFFSET) -#define SIU_INT_PC14 ((uint)0x31 + CPM_IRQ_OFFSET) -#define SIU_INT_PC13 ((uint)0x32 + CPM_IRQ_OFFSET) -#define SIU_INT_PC12 ((uint)0x33 + CPM_IRQ_OFFSET) -#define SIU_INT_PC11 ((uint)0x34 + CPM_IRQ_OFFSET) -#define SIU_INT_PC10 ((uint)0x35 + CPM_IRQ_OFFSET) -#define SIU_INT_PC9 ((uint)0x36 + CPM_IRQ_OFFSET) -#define SIU_INT_PC8 ((uint)0x37 + CPM_IRQ_OFFSET) -#define SIU_INT_PC7 ((uint)0x38 + CPM_IRQ_OFFSET) -#define SIU_INT_PC6 ((uint)0x39 + CPM_IRQ_OFFSET) -#define SIU_INT_PC5 ((uint)0x3a + CPM_IRQ_OFFSET) -#define SIU_INT_PC4 ((uint)0x3b + CPM_IRQ_OFFSET) -#define SIU_INT_PC3 ((uint)0x3c + CPM_IRQ_OFFSET) -#define SIU_INT_PC2 ((uint)0x3d + CPM_IRQ_OFFSET) -#define SIU_INT_PC1 ((uint)0x3e + CPM_IRQ_OFFSET) -#define SIU_INT_PC0 ((uint)0x3f + CPM_IRQ_OFFSET) - -#endif /* CONFIG_8260 */ - -#endif /* Whatever way too big #ifdef */ - -#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) -/* pedantic: these are long because they are used with set_bit --RR */ -extern unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; - -/* - * Because many systems have two overlapping names spaces for - * interrupts (ISA and XICS for example), and the ISA interrupts - * have historically not been easy to renumber, we allow ISA - * interrupts to take values 0 - 15, and shift up the remaining - * interrupts by 0x10. - */ -#define NUM_ISA_INTERRUPTS 0x10 -extern int __irq_offset_value; - -static inline int irq_offset_up(int irq) -{ - return(irq + __irq_offset_value); -} - -static inline int irq_offset_down(int irq) -{ - return(irq - __irq_offset_value); -} - -static inline int irq_offset_value(void) -{ - return __irq_offset_value; -} - -#ifdef __DO_IRQ_CANON -extern int ppc_do_canonicalize_irqs; -#else -#define ppc_do_canonicalize_irqs 0 -#endif - -static __inline__ int irq_canonicalize(int irq) -{ - if (ppc_do_canonicalize_irqs && irq == 2) - irq = 9; - return irq; -} -#endif /* CONFIG_PPC_MERGE */ - extern int distribute_irqs; struct irqaction; diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 1a4094704b1..64f5948ebc9 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -59,8 +59,6 @@ obj64-$(CONFIG_HIBERNATION) += swsusp_asm64.o obj-$(CONFIG_MODULES) += module.o module_$(CONFIG_WORD_SIZE).o obj-$(CONFIG_44x) += cpu_setup_44x.o -ifeq ($(CONFIG_PPC_MERGE),y) - extra-$(CONFIG_PPC_STD_MMU) := head_32.o extra-$(CONFIG_PPC64) := head_64.o extra-$(CONFIG_40x) := head_40x.o @@ -100,12 +98,6 @@ ifneq ($(CONFIG_PPC_INDIRECT_IO),y) obj-y += iomap.o endif -else -# stuff used from here for ARCH=ppc -smpobj-$(CONFIG_SMP) += smp.o - -endif - obj-$(CONFIG_PPC64) += $(obj64-y) extra-$(CONFIG_PPC_FPU) += fpu.o @@ -121,9 +113,6 @@ PHONY += systbl_chk systbl_chk: $(src)/systbl_chk.sh $(obj)/systbl_chk.i $(call cmd,systbl_chk) - -ifeq ($(CONFIG_PPC_MERGE),y) - $(obj)/built-in.o: prom_init_check quiet_cmd_prom_init_check = CALL $< @@ -133,7 +122,4 @@ PHONY += prom_init_check prom_init_check: $(src)/prom_init_check.sh $(obj)/prom_init.o $(call cmd,prom_init_check) -endif - - clean-files := vmlinux.lds diff --git a/arch/powerpc/kernel/cpu_setup_44x.S b/arch/powerpc/kernel/cpu_setup_44x.S index 5465e8de0e6..80cac984d85 100644 --- a/arch/powerpc/kernel/cpu_setup_44x.S +++ b/arch/powerpc/kernel/cpu_setup_44x.S @@ -39,12 +39,6 @@ _GLOBAL(__setup_cpu_440gx) _GLOBAL(__setup_cpu_440spe) b __fixup_440A_mcheck - /* Temporary fixup for arch/ppc until we kill the whole thing */ -#ifndef CONFIG_PPC_MERGE -_GLOBAL(__fixup_440A_mcheck) - blr -#endif - /* enable APU between CPU and FPU */ _GLOBAL(__init_fpu_44x) mfspr r3,SPRN_CCR0 diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 6ac8612da3c..d972decf032 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -77,22 +77,12 @@ static int ppc_spurious_interrupts; EXPORT_SYMBOL(__irq_offset_value); atomic_t ppc_n_lost_interrupts; -#ifndef CONFIG_PPC_MERGE -#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) -unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; -#endif - #ifdef CONFIG_TAU_INT extern int tau_initialized; extern int tau_interrupts(int); #endif #endif /* CONFIG_PPC32 */ -#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE) -extern atomic_t ipi_recv; -extern atomic_t ipi_sent; -#endif - #ifdef CONFIG_PPC64 EXPORT_SYMBOL(irq_desc); @@ -216,21 +206,14 @@ int show_interrupts(struct seq_file *p, void *v) skip: spin_unlock_irqrestore(&desc->lock, flags); } else if (i == NR_IRQS) { -#ifdef CONFIG_PPC32 -#ifdef CONFIG_TAU_INT +#if defined(CONFIG_PPC32) && defined(CONFIG_TAU_INT) if (tau_initialized){ seq_puts(p, "TAU: "); for_each_online_cpu(j) seq_printf(p, "%10u ", tau_interrupts(j)); seq_puts(p, " PowerPC Thermal Assist (cpu temp)\n"); } -#endif -#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE) - /* should this be per processor send/receive? */ - seq_printf(p, "IPI (recv/sent): %10u/%u\n", - atomic_read(&ipi_recv), atomic_read(&ipi_sent)); -#endif -#endif /* CONFIG_PPC32 */ +#endif /* CONFIG_PPC32 && CONFIG_TAU_INT*/ seq_printf(p, "BAD: %10u\n", ppc_spurious_interrupts); } return 0; @@ -454,8 +437,6 @@ void do_softirq(void) * IRQ controller and virtual interrupts */ -#ifdef CONFIG_PPC_MERGE - static LIST_HEAD(irq_hosts); static DEFINE_SPINLOCK(irq_big_lock); static DEFINE_PER_CPU(unsigned int, irq_radix_reader); @@ -1114,8 +1095,6 @@ static int __init irq_debugfs_init(void) __initcall(irq_debugfs_init); #endif /* CONFIG_VIRQ_DEBUG */ -#endif /* CONFIG_PPC_MERGE */ - #ifdef CONFIG_PPC64 static int __init setup_noirqdistrib(char *str) { diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index e030f3bd502..957bded0020 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -276,10 +276,8 @@ int set_dabr(unsigned long dabr) { __get_cpu_var(current_dabr) = dabr; -#ifdef CONFIG_PPC_MERGE /* XXX for now */ if (ppc_md.set_dabr) return ppc_md.set_dabr(dabr); -#endif /* XXX should we have a CPU_FTR_HAS_DABR ? */ #if defined(CONFIG_PPC64) || defined(CONFIG_6xx) diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c index f177c60ea76..65639a43e64 100644 --- a/arch/powerpc/kernel/vdso.c +++ b/arch/powerpc/kernel/vdso.c @@ -788,9 +788,7 @@ static int __init vdso_init(void) return 0; } -#ifdef CONFIG_PPC_MERGE arch_initcall(vdso_init); -#endif int in_gate_area_no_task(unsigned long addr) { diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index 2a88e8b9a3c..d69912c07ce 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -6,12 +6,10 @@ ifeq ($(CONFIG_PPC64),y) EXTRA_CFLAGS += -mno-minimal-toc endif -ifeq ($(CONFIG_PPC_MERGE),y) obj-y := string.o alloc.o \ checksum_$(CONFIG_WORD_SIZE).o obj-$(CONFIG_PPC32) += div64.o copy_32.o crtsavres.o obj-$(CONFIG_HAS_IOMEM) += devres.o -endif obj-$(CONFIG_PPC64) += copypage_64.o copyuser_64.o \ memcpy_64.o usercopy_64.o mem_64.o string.o diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile index daf0e1568d6..b8a52062738 100644 --- a/arch/powerpc/platforms/52xx/Makefile +++ b/arch/powerpc/platforms/52xx/Makefile @@ -1,10 +1,8 @@ # # Makefile for 52xx based boards # -ifeq ($(CONFIG_PPC_MERGE),y) obj-y += mpc52xx_pic.o mpc52xx_common.o obj-$(CONFIG_PCI) += mpc52xx_pci.o -endif obj-$(CONFIG_PPC_MPC5200_SIMPLE) += mpc5200_simple.o obj-$(CONFIG_PPC_EFIKA) += efika.o @@ -15,4 +13,4 @@ ifeq ($(CONFIG_PPC_LITE5200),y) obj-$(CONFIG_PM) += lite5200_sleep.o lite5200_pm.o endif -obj-$(CONFIG_PPC_MPC5200_GPIO) += mpc52xx_gpio.o \ No newline at end of file +obj-$(CONFIG_PPC_MPC5200_GPIO) += mpc52xx_gpio.o diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile index 423a0234dc3..8079e0b4fd6 100644 --- a/arch/powerpc/platforms/Makefile +++ b/arch/powerpc/platforms/Makefile @@ -1,13 +1,7 @@ obj-$(CONFIG_FSL_ULI1575) += fsl_uli1575.o -ifeq ($(CONFIG_PPC_MERGE),y) obj-$(CONFIG_PPC_PMAC) += powermac/ -else -ifeq ($(CONFIG_PPC64),y) -obj-$(CONFIG_PPC_PMAC) += powermac/ -endif -endif obj-$(CONFIG_PPC_CHRP) += chrp/ obj-$(CONFIG_40x) += 40x/ obj-$(CONFIG_44x) += 44x/ diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile index 89774177b20..58ecdd72630 100644 --- a/arch/powerpc/platforms/powermac/Makefile +++ b/arch/powerpc/platforms/powermac/Makefile @@ -7,7 +7,7 @@ endif obj-y += pic.o setup.o time.o feature.o pci.o \ sleep.o low_i2c.o cache.o pfunc_core.o \ - pfunc_base.o + pfunc_base.o udbg_scc.o udbg_adb.o obj-$(CONFIG_PMAC_BACKLIGHT) += backlight.o obj-$(CONFIG_CPU_FREQ_PMAC) += cpufreq_32.o obj-$(CONFIG_CPU_FREQ_PMAC64) += cpufreq_64.o @@ -19,4 +19,3 @@ obj-$(CONFIG_NVRAM:m=y) += nvram.o obj-$(CONFIG_PPC64) += nvram.o obj-$(CONFIG_PPC32) += bootx_init.o obj-$(CONFIG_SMP) += smp.o -obj-$(CONFIG_PPC_MERGE) += udbg_scc.o udbg_adb.o diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 16a0ed28eb0..a90054b56d5 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -25,7 +25,6 @@ obj-$(CONFIG_MV64X60) += $(mv64x60-y) mv64x60_pic.o mv64x60_dev.o \ obj-$(CONFIG_RTC_DRV_CMOS) += rtc_cmos_setup.o obj-$(CONFIG_AXON_RAM) += axonram.o -ifeq ($(CONFIG_PPC_MERGE),y) obj-$(CONFIG_PPC_INDIRECT_PCI) += indirect_pci.o obj-$(CONFIG_PPC_I8259) += i8259.o obj-$(CONFIG_IPIC) += ipic.o @@ -36,7 +35,6 @@ obj-$(CONFIG_OF_RTC) += of_rtc.o ifeq ($(CONFIG_PCI),y) obj-$(CONFIG_4xx) += ppc4xx_pci.o endif -endif # Temporary hack until we have migrated to asm-powerpc ifeq ($(ARCH),powerpc) -- cgit v1.2.3 From 1c5402ba55e809f0b685f07728794ea27b197f33 Mon Sep 17 00:00:00 2001 From: Valentine Barshak Date: Thu, 10 Jul 2008 04:02:34 +1000 Subject: powerpc/44x: Adjust warp-nand resource end address Adjust the NDFC resource end value (resource size = end - start + 1). Signed-off-by: Valentine Barshak Signed-off-by: Josh Boyer --- arch/powerpc/platforms/44x/warp-nand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/44x/warp-nand.c b/arch/powerpc/platforms/44x/warp-nand.c index e55746b824b..89ecd76127d 100644 --- a/arch/powerpc/platforms/44x/warp-nand.c +++ b/arch/powerpc/platforms/44x/warp-nand.c @@ -24,7 +24,7 @@ static struct resource warp_ndfc = { .start = WARP_NAND_FLASH_REG_ADDR, - .end = WARP_NAND_FLASH_REG_ADDR + WARP_NAND_FLASH_REG_SIZE, + .end = WARP_NAND_FLASH_REG_ADDR + WARP_NAND_FLASH_REG_SIZE - 1, .flags = IORESOURCE_MEM, }; -- cgit v1.2.3 From 048040a36d46dced846b058bc083c212e0c75615 Mon Sep 17 00:00:00 2001 From: Sean MacLennan Date: Sat, 26 Jul 2008 11:45:10 +1000 Subject: powerpc/4xx: Cleanup Warp for i2c driver changes. This patch removes the i2c code which is now obsolete due to the new ibm iic driver walking the device tree for child nodes. There are two other small cleanups that came indirectly from the ad7414 code review. Make sure Tlow is correct and handle the case where i2c_smbus_read_word_data fails. Signed-off-by: Sean MacLennan Signed-off-by: Josh Boyer --- arch/powerpc/platforms/44x/warp.c | 25 ++++++++++--------------- 1 file changed, 10 insertions(+), 15 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c index 9565995cba7..960edf89be5 100644 --- a/arch/powerpc/platforms/44x/warp.c +++ b/arch/powerpc/platforms/44x/warp.c @@ -30,18 +30,6 @@ static __initdata struct of_device_id warp_of_bus[] = { {}, }; -static __initdata struct i2c_board_info warp_i2c_info[] = { - { I2C_BOARD_INFO("ad7414", 0x4a) } -}; - -static int __init warp_arch_init(void) -{ - /* This should go away once support is moved to the dts. */ - i2c_register_board_info(0, warp_i2c_info, ARRAY_SIZE(warp_i2c_info)); - return 0; -} -machine_arch_initcall(warp, warp_arch_init); - static int __init warp_device_probe(void) { of_platform_bus_probe(NULL, warp_of_bus, NULL); @@ -223,7 +211,7 @@ static void pika_setup_critical_temp(struct i2c_client *client) /* These registers are in 1 degree increments. */ i2c_smbus_write_byte_data(client, 2, 65); /* Thigh */ - i2c_smbus_write_byte_data(client, 3, 55); /* Tlow */ + i2c_smbus_write_byte_data(client, 3, 0); /* Tlow */ np = of_find_compatible_node(NULL, NULL, "adi,ad7414"); if (np == NULL) { @@ -289,8 +277,15 @@ found_it: printk(KERN_INFO "PIKA DTM thread running.\n"); while (!kthread_should_stop()) { - u16 temp = swab16(i2c_smbus_read_word_data(client, 0)); - out_be32(fpga + 0x20, temp); + int val; + + val = i2c_smbus_read_word_data(client, 0); + if (val < 0) + dev_dbg(&client->dev, "DTM read temp failed.\n"); + else { + s16 temp = swab16(val); + out_be32(fpga + 0x20, temp); + } pika_dtm_check_fan(fpga); -- cgit v1.2.3 From 1d555cf168315ceb5422df9bff348466da2c549d Mon Sep 17 00:00:00 2001 From: Sean MacLennan Date: Sat, 26 Jul 2008 11:50:19 +1000 Subject: powerpc/44x: Warp DTS changes for board updates Added support for the new at24 eeprom driver. Documented a new fpga section, the DMA scatter gather list. Removed index from i2c. No longer needed. Fixed the leds section. Signed-off-by: Sean MacLennan Signed-off-by: Josh Boyer --- arch/powerpc/boot/dts/warp.dts | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts index 340018cf16b..730073671bb 100644 --- a/arch/powerpc/boot/dts/warp.dts +++ b/arch/powerpc/boot/dts/warp.dts @@ -139,6 +139,11 @@ interrupt-parent = <&UIC0>; }; + fpga@2,2000 { + compatible = "pika,fpga-sgl"; + reg = <0x00000002 0x00002000 0x00000200>; + }; + fpga@2,4000 { compatible = "pika,fpga-sd"; reg = <0x00000002 0x00004000 0x00000A00>; @@ -181,7 +186,6 @@ reg = <0xef600700 0x00000014>; interrupt-parent = <&UIC0>; interrupts = <0x2 0x4>; - index = <0x0>; #address-cells = <1>; #size-cells = <0>; @@ -191,6 +195,12 @@ interrupts = <0x19 0x8>; interrupt-parent = <&UIC0>; }; + + /* This will create 52 and 53 */ + at24@52 { + compatible = "at,24c04"; + reg = <0x52>; + }; }; GPIO0: gpio@ef600b00 { @@ -209,7 +219,13 @@ led@31 { compatible = "linux,gpio-led"; linux,name = ":green:"; - gpios = <&GPIO1 0x30 0>; + gpios = <&GPIO1 31 0>; + }; + + led@30 { + compatible = "linux,gpio-led"; + linux,name = ":red:"; + gpios = <&GPIO1 30 0>; }; }; -- cgit v1.2.3 From 929badad6296c9682d271c97f39b78cb7007128a Mon Sep 17 00:00:00 2001 From: Sean MacLennan Date: Thu, 31 Jul 2008 13:41:11 +1000 Subject: powerpc/44x: Incorrect NOR offset in Warp DTS FPGA offset in NOR flash was converted incorrectly when switching from 64M to 4M flash. Signed-off-by: Sean MacLennan Signed-off-by: Josh Boyer --- arch/powerpc/boot/dts/warp.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts index 730073671bb..f4e4ba69eef 100644 --- a/arch/powerpc/boot/dts/warp.dts +++ b/arch/powerpc/boot/dts/warp.dts @@ -157,7 +157,7 @@ #size-cells = <1>; partition@300000 { label = "fpga"; - reg = <0x0030000 0x00040000>; + reg = <0x0300000 0x00040000>; }; partition@340000 { label = "env"; -- cgit v1.2.3 From b5b9309d3415480b3e66314a1d6c89db58bff9de Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 5 Aug 2008 18:16:58 +0200 Subject: remove unnecessary includes Following files don't need at all: - arch/mips/jazz/setup.c - arch/sh/boards/mach-systemh/irq.c - drivers/macintosh/mediabay.c - drivers/scsi/hptiop.c - drivers/usb/storage/freecom.c - arch/powerpc/include/asm/ide.h - init/main.c Cc: Christoph Hellwig Signed-off-by: Bartlomiej Zolnierkiewicz --- arch/powerpc/include/asm/ide.h | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/include/asm/ide.h b/arch/powerpc/include/asm/ide.h index 1aaf27be874..048480e340f 100644 --- a/arch/powerpc/include/asm/ide.h +++ b/arch/powerpc/include/asm/ide.h @@ -20,7 +20,6 @@ #define __ide_mm_outsl(p, a, c) writesl((void __iomem *)(p), (a), (c)) #ifndef __powerpc64__ -#include #include /* FIXME: use ide_platform host driver */ -- cgit v1.2.3 From 775587b6d769af3ba779a12ce790db4ccf0d1676 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Tue, 5 Aug 2008 13:01:02 -0700 Subject: powerpc: 86xx: mpc8610_hpcd: add watchdog node Signed-off-by: Anton Vorontsov Cc: Kumar Gala Cc: Wim Van Sebroeck Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/boot/dts/mpc8610_hpcd.dts | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts index 666185f5945..3b3a1062cb2 100644 --- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts +++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts @@ -202,6 +202,11 @@ fsl,has-rstcr; }; + wdt@e4000 { + compatible = "fsl,mpc8610-wdt"; + reg = <0xe4000 0x100>; + }; + i2s@16000 { compatible = "fsl,mpc8610-ssi"; cell-index = <0>; -- cgit v1.2.3 From 9ea7d5ad84d61a4e8b892d5ed12ccc26f9d6351b Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Tue, 5 Aug 2008 18:50:18 -0400 Subject: powerpc/4xx: Update defconfig files for 2.6.27-rc1 Update the defconfig files for 4xx boards. This also makes the mutli-board defconfigs a bit more useful by enabling some of the more common modules. Signed-off-by: Josh Boyer --- arch/powerpc/configs/40x/ep405_defconfig | 207 ++++++++++---- arch/powerpc/configs/40x/kilauea_defconfig | 196 +++++++++---- arch/powerpc/configs/40x/makalu_defconfig | 196 +++++++++---- arch/powerpc/configs/40x/walnut_defconfig | 203 +++++++++---- arch/powerpc/configs/44x/bamboo_defconfig | 206 +++++++++----- arch/powerpc/configs/44x/canyonlands_defconfig | 116 +++++--- arch/powerpc/configs/44x/ebony_defconfig | 207 ++++++++++---- arch/powerpc/configs/44x/katmai_defconfig | 259 +++++++++++------ arch/powerpc/configs/44x/rainier_defconfig | 207 +++++++++----- arch/powerpc/configs/44x/sam440ep_defconfig | 109 +++++-- arch/powerpc/configs/44x/sequoia_defconfig | 207 +++++++++----- arch/powerpc/configs/44x/taishan_defconfig | 208 +++++++++----- arch/powerpc/configs/44x/virtex5_defconfig | 100 +++++-- arch/powerpc/configs/44x/warp_defconfig | 232 ++++++++++----- arch/powerpc/configs/ppc40x_defconfig | 374 +++++++++++++++++++----- arch/powerpc/configs/ppc44x_defconfig | 375 +++++++++++++++++++++++-- 16 files changed, 2510 insertions(+), 892 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/configs/40x/ep405_defconfig b/arch/powerpc/configs/40x/ep405_defconfig index e24240a9a04..2113ae2ab40 100644 --- a/arch/powerpc/configs/40x/ep405_defconfig +++ b/arch/powerpc/configs/40x/ep405_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc2 -# Fri Feb 15 21:50:09 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 19:34:03 2008 # # CONFIG_PPC64 is not set @@ -26,8 +26,12 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -75,6 +79,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -83,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -108,13 +114,22 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -125,6 +140,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -139,14 +155,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -188,7 +201,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set @@ -206,13 +218,17 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -222,6 +238,8 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -232,6 +250,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -241,17 +260,13 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00400000 - -# -# Networking -# CONFIG_NET=y # @@ -289,8 +304,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -340,6 +353,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -352,6 +367,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -443,12 +459,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -466,12 +484,15 @@ CONFIG_HAVE_IDE=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -506,7 +527,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -516,12 +536,12 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -534,6 +554,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -541,6 +562,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -576,6 +598,7 @@ CONFIG_NETDEV_10000=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -614,12 +637,9 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -635,13 +655,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -658,10 +689,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y @@ -678,12 +705,16 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y @@ -701,6 +732,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -744,17 +776,16 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -769,7 +800,6 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -818,6 +848,7 @@ CONFIG_TMPFS=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -828,14 +859,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -856,8 +885,10 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -867,6 +898,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -874,6 +906,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -881,9 +914,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -896,17 +932,30 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -918,51 +967,85 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/40x/kilauea_defconfig b/arch/powerpc/configs/40x/kilauea_defconfig index 2f475391f1d..565ed9666c5 100644 --- a/arch/powerpc/configs/40x/kilauea_defconfig +++ b/arch/powerpc/configs/40x/kilauea_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc2 -# Fri Feb 15 21:51:43 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 19:36:14 2008 # # CONFIG_PPC64 is not set @@ -26,8 +26,12 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -75,6 +79,7 @@ CONFIG_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -83,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -108,13 +114,22 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -125,6 +140,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -139,14 +155,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set CONFIG_PPC4xx_PCI_EXPRESS=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -186,7 +199,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set @@ -204,13 +216,17 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -220,6 +236,8 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -230,6 +248,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -239,17 +258,13 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00400000 - -# -# Networking -# CONFIG_NET=y # @@ -287,8 +302,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -338,6 +351,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -350,6 +365,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -440,6 +456,7 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -458,12 +475,15 @@ CONFIG_HAVE_IDE=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -502,6 +522,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -528,6 +549,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -566,12 +588,9 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -587,13 +606,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -610,22 +640,16 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -640,7 +664,6 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -689,6 +712,7 @@ CONFIG_TMPFS=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -699,14 +723,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -727,8 +749,10 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -738,6 +762,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -745,6 +770,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -752,9 +778,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -767,17 +796,30 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -789,51 +831,85 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/40x/makalu_defconfig b/arch/powerpc/configs/40x/makalu_defconfig index 9ef4d8a312c..987a4481800 100644 --- a/arch/powerpc/configs/40x/makalu_defconfig +++ b/arch/powerpc/configs/40x/makalu_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc2 -# Fri Feb 15 21:52:30 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 19:38:39 2008 # # CONFIG_PPC64 is not set @@ -26,8 +26,12 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -75,6 +79,7 @@ CONFIG_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -83,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -108,13 +114,22 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -125,6 +140,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -139,14 +155,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set CONFIG_PPC4xx_PCI_EXPRESS=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -186,7 +199,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set @@ -204,13 +216,17 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -220,6 +236,8 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -230,6 +248,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -239,17 +258,13 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00400000 - -# -# Networking -# CONFIG_NET=y # @@ -287,8 +302,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -338,6 +351,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -350,6 +365,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -440,6 +456,7 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -458,12 +475,15 @@ CONFIG_HAVE_IDE=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -502,6 +522,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -528,6 +549,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -566,12 +588,9 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -587,13 +606,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -610,22 +640,16 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -640,7 +664,6 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -689,6 +712,7 @@ CONFIG_TMPFS=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -699,14 +723,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -727,8 +749,10 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -738,6 +762,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -745,6 +770,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -752,9 +778,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -767,17 +796,30 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -789,51 +831,85 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/40x/walnut_defconfig b/arch/powerpc/configs/40x/walnut_defconfig index 3b2689e5002..aee79338f41 100644 --- a/arch/powerpc/configs/40x/walnut_defconfig +++ b/arch/powerpc/configs/40x/walnut_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc2 -# Fri Feb 15 21:54:12 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 19:40:56 2008 # # CONFIG_PPC64 is not set @@ -26,8 +26,12 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -75,6 +79,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -83,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -108,13 +114,22 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -125,6 +140,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -139,14 +155,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -189,7 +202,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set @@ -207,13 +219,17 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -223,6 +239,8 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -233,6 +251,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -242,17 +261,13 @@ CONFIG_ARCH_SUPPORTS_MSI=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00400000 - -# -# Networking -# CONFIG_NET=y # @@ -290,8 +305,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -341,6 +354,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -353,6 +368,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -443,12 +459,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -466,12 +484,15 @@ CONFIG_HAVE_IDE=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -506,7 +527,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -516,12 +536,12 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -534,6 +554,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -541,6 +562,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -567,6 +589,7 @@ CONFIG_NETDEV_10000=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -605,12 +628,9 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -626,13 +646,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -649,16 +680,14 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -667,13 +696,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -688,7 +715,6 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -737,6 +763,7 @@ CONFIG_TMPFS=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -747,14 +774,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -775,8 +800,10 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -786,6 +813,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -793,6 +821,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -800,9 +829,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -815,17 +847,30 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -837,51 +882,85 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/bamboo_defconfig b/arch/powerpc/configs/44x/bamboo_defconfig index c44db554cdc..e920693535a 100644 --- a/arch/powerpc/configs/44x/bamboo_defconfig +++ b/arch/powerpc/configs/44x/bamboo_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc2 -# Fri Feb 15 21:36:39 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 08:43:44 2008 # # CONFIG_PPC64 is not set @@ -30,8 +30,12 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -79,6 +83,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -87,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -112,13 +118,22 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -129,6 +144,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -143,24 +159,25 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set CONFIG_BAMBOO=y # CONFIG_EBONY is not set +# CONFIG_SAM440EP is not set # CONFIG_SEQUOIA is not set # CONFIG_TAISHAN is not set # CONFIG_KATMAI is not set # CONFIG_RAINIER is not set # CONFIG_WARP is not set +# CONFIG_CANYONLANDS is not set +# CONFIG_YOSEMITE is not set +# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_440EP=y CONFIG_IBM440EP_ERR42=y # CONFIG_IPIC is not set @@ -193,7 +210,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set @@ -211,14 +227,18 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="" +CONFIG_EXTRA_TARGETS="" CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -227,6 +247,8 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -237,6 +259,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -246,17 +269,13 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x01000000 - -# -# Networking -# CONFIG_NET=y # @@ -294,8 +313,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -345,6 +362,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -370,12 +389,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -393,12 +414,15 @@ CONFIG_HAVE_IDE=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -433,7 +457,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -443,12 +466,12 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -461,6 +484,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -468,6 +492,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -494,6 +519,7 @@ CONFIG_NETDEV_10000=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -532,12 +558,9 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -553,13 +576,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -576,16 +610,14 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -594,13 +626,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -615,7 +645,6 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -663,6 +692,7 @@ CONFIG_TMPFS=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -673,14 +703,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -701,8 +729,10 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -712,6 +742,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -719,6 +750,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -726,9 +758,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -741,19 +776,30 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -CONFIG_DEBUGGER=y -# CONFIG_KGDB is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -765,51 +811,85 @@ CONFIG_DEBUGGER=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/canyonlands_defconfig b/arch/powerpc/configs/44x/canyonlands_defconfig index a3b763c45ec..74da5c7754a 100644 --- a/arch/powerpc/configs/44x/canyonlands_defconfig +++ b/arch/powerpc/configs/44x/canyonlands_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc1 -# Thu Feb 21 14:29:28 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 08:46:14 2008 # # CONFIG_PPC64 is not set @@ -30,8 +30,12 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -73,8 +77,9 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -# CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -83,12 +88,12 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y -# CONFIG_LOGBUFFER is not set CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_COMPAT_BRK=y @@ -109,13 +114,22 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -126,6 +140,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -140,25 +155,25 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set CONFIG_PPC4xx_PCI_EXPRESS=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set # CONFIG_BAMBOO is not set # CONFIG_EBONY is not set +# CONFIG_SAM440EP is not set # CONFIG_SEQUOIA is not set # CONFIG_TAISHAN is not set # CONFIG_KATMAI is not set # CONFIG_RAINIER is not set # CONFIG_WARP is not set CONFIG_CANYONLANDS=y +# CONFIG_YOSEMITE is not set +# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_460EX=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -190,7 +205,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set @@ -208,16 +222,19 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="" +CONFIG_EXTRA_TARGETS="" CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y CONFIG_ISA_DMA_API=y # @@ -225,6 +242,8 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -235,6 +254,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -244,17 +264,13 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x01000000 - -# -# Networking -# CONFIG_NET=y # @@ -292,8 +308,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -343,6 +357,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -368,6 +384,7 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -386,12 +403,15 @@ CONFIG_HAVE_IDE=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -430,6 +450,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -456,6 +477,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -494,16 +516,14 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -515,13 +535,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -538,22 +569,16 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -568,7 +593,6 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -616,6 +640,7 @@ CONFIG_TMPFS=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -626,14 +651,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -654,8 +677,10 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -665,6 +690,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -672,6 +698,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -679,9 +706,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -694,19 +724,30 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -CONFIG_DEBUGGER=y -# CONFIG_KGDB is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -719,3 +760,4 @@ CONFIG_DEBUGGER=y # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/ebony_defconfig b/arch/powerpc/configs/44x/ebony_defconfig index 07c8d4ce175..17615750b49 100644 --- a/arch/powerpc/configs/44x/ebony_defconfig +++ b/arch/powerpc/configs/44x/ebony_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc2 -# Fri Feb 15 21:50:44 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 09:04:12 2008 # # CONFIG_PPC64 is not set @@ -29,8 +29,12 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -78,6 +82,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -86,6 +91,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -111,13 +117,22 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -128,6 +143,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -142,24 +158,25 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set # CONFIG_BAMBOO is not set CONFIG_EBONY=y +# CONFIG_SAM440EP is not set # CONFIG_SEQUOIA is not set # CONFIG_TAISHAN is not set # CONFIG_KATMAI is not set # CONFIG_RAINIER is not set # CONFIG_WARP is not set +# CONFIG_CANYONLANDS is not set +# CONFIG_YOSEMITE is not set +# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_440GP=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -192,7 +209,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y @@ -210,13 +226,17 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -225,6 +245,8 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -235,6 +257,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -244,17 +267,13 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x01000000 - -# -# Networking -# CONFIG_NET=y # @@ -292,8 +311,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -343,6 +360,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -355,6 +374,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -444,12 +464,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -467,12 +489,15 @@ CONFIG_HAVE_IDE=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -507,7 +532,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -517,12 +541,12 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -535,6 +559,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -542,6 +567,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -568,6 +594,7 @@ CONFIG_NETDEV_10000=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -606,12 +633,9 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -627,13 +651,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -650,16 +685,14 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -668,13 +701,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -689,7 +720,6 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -748,6 +778,7 @@ CONFIG_JFFS2_RTIME=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -758,14 +789,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -786,8 +815,10 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -798,6 +829,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -805,6 +837,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -812,9 +845,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -827,17 +863,30 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -849,50 +898,84 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/katmai_defconfig b/arch/powerpc/configs/44x/katmai_defconfig index c8804ec01ea..7bc4082a1c9 100644 --- a/arch/powerpc/configs/44x/katmai_defconfig +++ b/arch/powerpc/configs/44x/katmai_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc6 -# Mon Dec 24 11:17:43 2007 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 09:06:51 2008 # # CONFIG_PPC64 is not set @@ -29,7 +29,12 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -67,23 +72,22 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -91,11 +95,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -103,10 +109,26 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set +CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -117,6 +139,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -130,23 +153,28 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y CONFIG_PPC4xx_PCI_EXPRESS=y # # Platform support # -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set # CONFIG_BAMBOO is not set # CONFIG_EBONY is not set +# CONFIG_SAM440EP is not set # CONFIG_SEQUOIA is not set # CONFIG_TAISHAN is not set CONFIG_KATMAI=y # CONFIG_RAINIER is not set +# CONFIG_WARP is not set +# CONFIG_CANYONLANDS is not set +# CONFIG_YOSEMITE is not set +# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_440SPe=y +# CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -157,7 +185,6 @@ CONFIG_440SPe=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # @@ -173,13 +200,17 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set +# CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -190,17 +221,19 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="" +CONFIG_EXTRA_TARGETS="" CONFIG_SECCOMP=y -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="katmai.dts" CONFIG_ISA_DMA_API=y # @@ -208,6 +241,8 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -218,6 +253,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -227,17 +263,13 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x01000000 - -# -# Networking -# CONFIG_NET=y # @@ -275,8 +307,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -300,6 +330,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -325,6 +356,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -346,15 +379,19 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=35000 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -371,6 +408,10 @@ CONFIG_MISC_DEVICES=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set @@ -378,14 +419,12 @@ CONFIG_MACINTOSH_DRIVERS=y # CONFIG_MAC_EMUMOUSEBTN is not set # CONFIG_WINDFARM is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -414,6 +453,8 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -421,12 +462,12 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -438,6 +479,8 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -445,12 +488,12 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -472,7 +515,9 @@ CONFIG_NETDEV_10000=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -509,15 +554,14 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -529,13 +573,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -552,34 +607,27 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -594,14 +642,11 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -643,8 +688,11 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -652,14 +700,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -675,14 +721,15 @@ CONFIG_SUNRPC=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -692,10 +739,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_KPROBES is not set -# CONFIG_MARKERS is not set +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -703,6 +747,7 @@ CONFIG_INSTRUMENTATION=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -710,10 +755,14 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -724,19 +773,30 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -CONFIG_DEBUGGER=y -# CONFIG_KGDB is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -747,44 +807,85 @@ CONFIG_DEBUGGER=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/rainier_defconfig b/arch/powerpc/configs/44x/rainier_defconfig index dec18ca7351..0479648a914 100644 --- a/arch/powerpc/configs/44x/rainier_defconfig +++ b/arch/powerpc/configs/44x/rainier_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc2 -# Fri Feb 15 21:53:10 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 09:09:35 2008 # # CONFIG_PPC64 is not set @@ -29,8 +29,12 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -78,6 +82,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -86,6 +91,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -111,13 +117,22 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -128,6 +143,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -142,24 +158,25 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set # CONFIG_BAMBOO is not set # CONFIG_EBONY is not set +# CONFIG_SAM440EP is not set # CONFIG_SEQUOIA is not set # CONFIG_TAISHAN is not set # CONFIG_KATMAI is not set CONFIG_RAINIER=y # CONFIG_WARP is not set +# CONFIG_CANYONLANDS is not set +# CONFIG_YOSEMITE is not set +# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_440GRX=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -191,7 +208,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y @@ -209,14 +225,18 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="" +CONFIG_EXTRA_TARGETS="" CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -225,6 +245,8 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -235,6 +257,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -244,17 +267,13 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x01000000 - -# -# Networking -# CONFIG_NET=y # @@ -292,8 +311,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -343,6 +360,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -355,6 +374,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -445,12 +465,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -468,6 +490,10 @@ CONFIG_HAVE_IDE=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set @@ -475,7 +501,6 @@ CONFIG_MACINTOSH_DRIVERS=y # CONFIG_MAC_EMUMOUSEBTN is not set # CONFIG_WINDFARM is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -492,7 +517,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -502,12 +526,12 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -520,6 +544,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -527,6 +552,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -553,6 +579,7 @@ CONFIG_NETDEV_10000=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -591,12 +618,9 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -612,13 +636,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -635,16 +670,14 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -653,13 +686,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -674,7 +705,6 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -733,6 +763,7 @@ CONFIG_JFFS2_RTIME=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -743,14 +774,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -771,8 +800,10 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -783,6 +814,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -790,6 +822,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -797,9 +830,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -812,19 +848,30 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -CONFIG_DEBUGGER=y -# CONFIG_KGDB is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set CONFIG_PPC_EARLY_DEBUG=y @@ -849,51 +896,85 @@ CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1 # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/sam440ep_defconfig b/arch/powerpc/configs/44x/sam440ep_defconfig index 9ce5cbc2a4e..0ed2de05f4e 100644 --- a/arch/powerpc/configs/44x/sam440ep_defconfig +++ b/arch/powerpc/configs/44x/sam440ep_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25 -# Mon May 5 13:43:02 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 09:12:48 2008 # # CONFIG_PPC64 is not set @@ -30,9 +30,11 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -116,15 +118,22 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -135,6 +144,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -154,8 +164,6 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -169,6 +177,7 @@ CONFIG_SAM440EP=y # CONFIG_WARP is not set # CONFIG_CANYONLANDS is not set # CONFIG_YOSEMITE is not set +# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_440EP=y CONFIG_IBM440EP_ERR42=y # CONFIG_IPIC is not set @@ -220,6 +229,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -228,6 +238,7 @@ CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="" +CONFIG_EXTRA_TARGETS="" CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -237,6 +248,7 @@ CONFIG_ISA_DMA_API=y CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -263,10 +275,6 @@ CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 - -# -# Networking -# CONFIG_NET=y # @@ -353,6 +361,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y @@ -379,6 +389,7 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -422,6 +433,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set # CONFIG_SATA_PMP is not set @@ -481,18 +493,22 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -531,7 +547,6 @@ CONFIG_IBM_NEW_EMAC_ZMII=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI is not set # CONFIG_IWLWIFI_LEDS is not set # @@ -607,12 +622,14 @@ CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_XILINX_XPS_PS2 is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -661,40 +678,60 @@ CONFIG_I2C_ALGOBIT=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_IBM_IIC=y -# CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_IBM_IIC=y +# CONFIG_I2C_MPC is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -703,10 +740,13 @@ CONFIG_I2C_IBM_IIC=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -718,6 +758,7 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set @@ -730,6 +771,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # # Multimedia drivers @@ -755,7 +797,6 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_SYS_IMAGEBLIT is not set # CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set CONFIG_FB_MACMODES=y CONFIG_FB_BACKLIGHT=y @@ -795,10 +836,13 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_FB_VIRTUAL is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_CORGI is not set @@ -821,10 +865,6 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -859,11 +899,13 @@ CONFIG_USB_DEVICEFS=y # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y @@ -881,6 +923,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -900,6 +943,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -939,6 +983,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -976,6 +1021,7 @@ CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_M41T80=y CONFIG_RTC_DRV_M41T80_WDT=y # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers @@ -996,6 +1042,7 @@ CONFIG_RTC_DRV_M41T80_WDT=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set @@ -1074,6 +1121,7 @@ CONFIG_AFFS_FS=m # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1151,6 +1199,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=y CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1177,7 +1226,15 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set diff --git a/arch/powerpc/configs/44x/sequoia_defconfig b/arch/powerpc/configs/44x/sequoia_defconfig index dd5d6303c39..e40b1023265 100644 --- a/arch/powerpc/configs/44x/sequoia_defconfig +++ b/arch/powerpc/configs/44x/sequoia_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc2 -# Fri Feb 15 21:53:46 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 09:15:13 2008 # # CONFIG_PPC64 is not set @@ -30,8 +30,12 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -79,6 +83,7 @@ CONFIG_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -87,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -112,13 +118,22 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -129,6 +144,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -143,24 +159,25 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set # CONFIG_BAMBOO is not set # CONFIG_EBONY is not set +# CONFIG_SAM440EP is not set CONFIG_SEQUOIA=y # CONFIG_TAISHAN is not set # CONFIG_KATMAI is not set # CONFIG_RAINIER is not set # CONFIG_WARP is not set +# CONFIG_CANYONLANDS is not set +# CONFIG_YOSEMITE is not set +# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_440EPX=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -192,7 +209,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set @@ -210,14 +226,18 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="" +CONFIG_EXTRA_TARGETS="" CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -226,6 +246,8 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -236,6 +258,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -245,17 +268,13 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x01000000 - -# -# Networking -# CONFIG_NET=y # @@ -293,8 +312,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -344,6 +361,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -356,6 +375,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -446,12 +466,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -469,12 +491,15 @@ CONFIG_HAVE_IDE=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -509,7 +534,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -519,12 +543,12 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -537,6 +561,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -544,6 +569,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -570,6 +596,7 @@ CONFIG_NETDEV_10000=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -608,12 +635,9 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -629,13 +653,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -652,16 +687,14 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -670,13 +703,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -691,7 +722,6 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -750,6 +780,7 @@ CONFIG_JFFS2_RTIME=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -760,14 +791,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -788,8 +817,10 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -800,6 +831,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -807,6 +839,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -814,9 +847,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -829,19 +865,30 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -CONFIG_DEBUGGER=y -# CONFIG_KGDB is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set CONFIG_PPC_EARLY_DEBUG=y @@ -866,51 +913,85 @@ CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1 # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/taishan_defconfig b/arch/powerpc/configs/44x/taishan_defconfig index e53c92655bd..5075873bdb1 100644 --- a/arch/powerpc/configs/44x/taishan_defconfig +++ b/arch/powerpc/configs/44x/taishan_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc2 -# Fri Feb 15 21:40:44 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 09:17:48 2008 # # CONFIG_PPC64 is not set @@ -29,8 +29,12 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -78,6 +82,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -86,6 +91,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -111,13 +117,22 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -128,6 +143,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -142,24 +158,25 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set # CONFIG_BAMBOO is not set # CONFIG_EBONY is not set +# CONFIG_SAM440EP is not set # CONFIG_SEQUOIA is not set CONFIG_TAISHAN=y # CONFIG_KATMAI is not set # CONFIG_RAINIER is not set # CONFIG_WARP is not set +# CONFIG_CANYONLANDS is not set +# CONFIG_YOSEMITE is not set +# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_440GX=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -191,7 +208,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set @@ -209,14 +225,18 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="" +CONFIG_EXTRA_TARGETS="" CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -225,6 +245,8 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -235,6 +257,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -244,17 +267,13 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x01000000 - -# -# Networking -# CONFIG_NET=y # @@ -292,8 +311,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -343,6 +360,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -354,6 +373,8 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_OF_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -444,12 +465,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -467,6 +490,10 @@ CONFIG_HAVE_IDE=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set @@ -474,7 +501,6 @@ CONFIG_MACINTOSH_DRIVERS=y # CONFIG_MAC_EMUMOUSEBTN is not set # CONFIG_WINDFARM is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -509,7 +535,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -519,12 +544,12 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -537,6 +562,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -544,6 +570,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -570,6 +597,7 @@ CONFIG_NETDEV_10000=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -608,12 +636,9 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -629,13 +654,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -652,16 +688,14 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -670,13 +704,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -691,7 +723,6 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -740,6 +771,7 @@ CONFIG_TMPFS=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -750,14 +782,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -778,8 +808,10 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -789,6 +821,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -796,6 +829,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -803,9 +837,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -818,19 +855,30 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -CONFIG_DEBUGGER=y -# CONFIG_KGDB is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -842,51 +890,85 @@ CONFIG_DEBUGGER=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/44x/virtex5_defconfig b/arch/powerpc/configs/44x/virtex5_defconfig index 9c41f66b5a7..663ec512b33 100644 --- a/arch/powerpc/configs/44x/virtex5_defconfig +++ b/arch/powerpc/configs/44x/virtex5_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc8 -# Wed Jul 2 15:36:41 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 09:20:16 2008 # # CONFIG_PPC64 is not set @@ -29,9 +29,11 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -115,10 +117,16 @@ CONFIG_SLAB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -135,6 +143,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -154,13 +163,12 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set # CONFIG_BAMBOO is not set # CONFIG_EBONY is not set +# CONFIG_SAM440EP is not set # CONFIG_SEQUOIA is not set # CONFIG_TAISHAN is not set # CONFIG_KATMAI is not set @@ -221,6 +229,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -239,6 +248,7 @@ CONFIG_ISA_DMA_API=y CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -265,10 +275,6 @@ CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 - -# -# Networking -# CONFIG_NET=y # @@ -446,7 +452,9 @@ CONFIG_IP_NF_MANGLE=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set @@ -471,12 +479,14 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -503,7 +513,6 @@ CONFIG_HAVE_IDE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -532,7 +541,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -547,6 +555,7 @@ CONFIG_NETDEV_1000=y # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -619,12 +628,14 @@ CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_XILINX_XPS_PS2 is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -670,39 +681,59 @@ CONFIG_I2C_CHARDEV=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_IBM_IIC is not set -# CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_IBM_IIC is not set +# CONFIG_I2C_MPC is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -711,10 +742,13 @@ CONFIG_I2C_DEBUG_ALGO=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -726,6 +760,7 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set @@ -799,6 +834,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set # CONFIG_FB_IBM_GXT4500 is not set CONFIG_FB_XILINX=y # CONFIG_FB_VIRTUAL is not set @@ -831,10 +867,6 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set @@ -910,6 +942,7 @@ CONFIG_TMPFS=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y @@ -920,17 +953,16 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=y @@ -994,6 +1026,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1018,7 +1051,16 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1071,6 +1113,10 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig index 2313c3e8ef6..d9375a969c6 100644 --- a/arch/powerpc/configs/44x/warp_defconfig +++ b/arch/powerpc/configs/44x/warp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc2 -# Fri Feb 15 21:54:43 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 09:23:39 2008 # # CONFIG_PPC64 is not set @@ -30,8 +30,12 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -79,6 +83,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -87,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -111,13 +117,22 @@ CONFIG_SLAB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -128,6 +143,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -142,23 +158,24 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set # CONFIG_BAMBOO is not set # CONFIG_EBONY is not set +# CONFIG_SAM440EP is not set # CONFIG_SEQUOIA is not set # CONFIG_TAISHAN is not set # CONFIG_KATMAI is not set # CONFIG_RAINIER is not set CONFIG_WARP=y +# CONFIG_CANYONLANDS is not set +# CONFIG_YOSEMITE is not set +# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set CONFIG_440EP=y CONFIG_IBM440EP_ERR42=y # CONFIG_IPIC is not set @@ -191,7 +208,6 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set @@ -209,14 +225,18 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="ip=on" +CONFIG_EXTRA_TARGETS="" CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -224,10 +244,13 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y # CONFIG_PCI is not set # CONFIG_PCI_DOMAINS is not set # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -237,17 +260,13 @@ CONFIG_ZONE_DMA=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x01000000 - -# -# Networking -# CONFIG_NET=y # @@ -291,8 +310,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -318,6 +335,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_ATM is not set # CONFIG_BRIDGE is not set CONFIG_VLAN_8021Q=y +# CONFIG_VLAN_8021Q_GVRP is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set @@ -368,6 +386,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -446,6 +465,7 @@ CONFIG_MTD_NAND_IDS=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -460,6 +480,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -504,11 +525,11 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -538,6 +559,7 @@ CONFIG_IBM_NEW_EMAC_ZMII=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -571,6 +593,7 @@ CONFIG_IBM_NEW_EMAC_ZMII=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -608,44 +631,49 @@ CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set # -# I2C Algorithms +# I2C Hardware Bus support # -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set # -# I2C Hardware Bus support +# I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_IBM_IIC is not set # CONFIG_I2C_MPC is not set # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set # CONFIG_I2C_TINY_USB is not set +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -658,6 +686,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set @@ -698,6 +727,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set CONFIG_THERMAL=y +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -709,13 +739,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -730,10 +771,6 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y @@ -750,11 +787,15 @@ CONFIG_USB=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y @@ -770,6 +811,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -790,6 +832,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -825,6 +868,7 @@ CONFIG_USB_MON=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set CONFIG_MMC=m # CONFIG_MMC_DEBUG is not set @@ -836,19 +880,19 @@ CONFIG_MMC=m CONFIG_MMC_BLOCK=m CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set # # MMC/SD Host Controller Drivers # +# CONFIG_MMC_SDHCI is not set # CONFIG_MMC_WBSD is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -863,7 +907,6 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -924,6 +967,7 @@ CONFIG_JFFS2_RTIME=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -934,14 +978,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1001,8 +1043,10 @@ CONFIG_NLS_UTF8=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1013,6 +1057,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1020,6 +1065,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -1027,9 +1073,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1041,17 +1090,30 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set CONFIG_BDI_SWITCH=y # CONFIG_PPC_EARLY_DEBUG is not set @@ -1063,48 +1125,82 @@ CONFIG_BDI_SWITCH=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/ppc40x_defconfig b/arch/powerpc/configs/ppc40x_defconfig index 9d0140e3838..6a5b713a07e 100644 --- a/arch/powerpc/configs/ppc40x_defconfig +++ b/arch/powerpc/configs/ppc40x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc9 -# Tue Apr 15 08:46:44 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 12:34:33 2008 # # CONFIG_PPC64 is not set @@ -26,8 +26,12 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -84,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -109,14 +114,22 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -127,6 +140,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -146,11 +160,10 @@ CONFIG_PPC4xx_PCI_EXPRESS=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set +CONFIG_XILINX_VIRTEX=y CONFIG_EP405=y CONFIG_KILAUEA=y CONFIG_MAKALU=y @@ -158,7 +171,6 @@ CONFIG_WALNUT=y CONFIG_XILINX_VIRTEX_GENERIC_BOARD=y CONFIG_405GP=y CONFIG_405EX=y -CONFIG_XILINX_VIRTEX=y CONFIG_XILINX_VIRTEX_II_PRO=y CONFIG_XILINX_VIRTEX_4_FX=y CONFIG_IBM405_ERR77=y @@ -211,7 +223,9 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -219,6 +233,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -229,6 +244,7 @@ CONFIG_ISA_DMA_API=y CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -239,6 +255,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -248,17 +265,13 @@ CONFIG_ARCH_SUPPORTS_MSI=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00400000 - -# -# Networking -# CONFIG_NET=y # @@ -267,6 +280,11 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -284,7 +302,7 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set +CONFIG_INET_TUNNEL=m # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set @@ -295,9 +313,25 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -347,6 +381,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -359,6 +395,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -429,8 +466,17 @@ CONFIG_MTD_PHYSMAP_OF=y # # UBI - Unsorted block images # -# CONFIG_MTD_UBI is not set +CONFIG_MTD_UBI=m +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +CONFIG_MTD_UBI_GLUEBI=y + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=m # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -449,12 +495,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -472,12 +520,15 @@ CONFIG_HAVE_IDE=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -512,7 +563,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -522,12 +572,12 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -540,6 +590,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -547,6 +598,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -573,6 +625,7 @@ CONFIG_NETDEV_10000=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -611,13 +664,76 @@ CONFIG_XILINX_HWICAP=m # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y -# CONFIG_I2C is not set +CONFIG_I2C=m +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=m # -# SPI support +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + # +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_IBM_IIC=m +# CONFIG_I2C_MPC is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -633,13 +749,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -656,16 +783,14 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -674,14 +799,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -690,13 +812,18 @@ CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set +CONFIG_EXT3_FS=m +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -715,8 +842,11 @@ CONFIG_INOTIFY_USER=y # # DOS/FAT/NT Filesystems # +CONFIG_FAT_FS=m # CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # @@ -741,10 +871,27 @@ CONFIG_TMPFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS2_FS is not set +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_UBIFS_FS=m +# CONFIG_UBIFS_FS_XATTR is not set +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -755,14 +902,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -776,20 +921,64 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=m +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y @@ -802,6 +991,7 @@ CONFIG_HAVE_LMB=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -809,9 +999,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -824,17 +1017,30 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -846,51 +1052,85 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set -# CONFIG_CRYPTO_LZO is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_LZO=m CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig index f9d279bb700..c7825dcbf41 100644 --- a/arch/powerpc/configs/ppc44x_defconfig +++ b/arch/powerpc/configs/ppc44x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc8 -# Wed Jul 9 13:50:48 2008 +# Linux kernel version: 2.6.27-rc1 +# Tue Aug 5 10:01:31 2008 # # CONFIG_PPC64 is not set @@ -30,9 +30,11 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_GET_USER_PAGES_FAST is not set # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -116,10 +118,16 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -136,6 +144,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -155,8 +164,6 @@ CONFIG_PPC4xx_PCI_EXPRESS=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -231,6 +238,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -248,6 +256,7 @@ CONFIG_ISA_DMA_API=y CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -275,10 +284,6 @@ CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 - -# -# Networking -# CONFIG_NET=y # @@ -287,6 +292,11 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -304,7 +314,7 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set +CONFIG_INET_TUNNEL=m # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set @@ -315,7 +325,25 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -365,6 +393,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -447,8 +477,17 @@ CONFIG_MTD_PHYSMAP_OF=y # # UBI - Unsorted block images # -# CONFIG_MTD_UBI is not set +CONFIG_MTD_UBI=m +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +CONFIG_MTD_UBI_GLUEBI=y + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=m # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -460,6 +499,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=35000 @@ -467,12 +507,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -480,9 +522,41 @@ CONFIG_HAVE_IDE=y # SCSI device support # # CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set +CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -499,7 +573,6 @@ CONFIG_HAVE_IDE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -534,7 +607,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -549,6 +621,7 @@ CONFIG_NETDEV_1000=y # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -570,11 +643,21 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set +# CONFIG_NET_FC is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -635,8 +718,77 @@ CONFIG_XILINX_HWICAP=m # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y -# CONFIG_I2C is not set +CONFIG_I2C=m +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=m + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_IBM_IIC=m +# CONFIG_I2C_MPC is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -653,6 +805,7 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set @@ -686,22 +839,113 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_EHCI_HCD=m +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y +CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y +CONFIG_USB_EHCI_HCD_PPC_OF=y +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +CONFIG_USB_OHCI_HCD=m +CONFIG_USB_OHCI_HCD_PPC_OF=y +CONFIG_USB_OHCI_HCD_PPC_OF_BE=y +# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set +# CONFIG_USB_OHCI_HCD_PCI is not set +CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y +CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set + # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -719,8 +963,13 @@ CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set +CONFIG_EXT3_FS=m +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=m +CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -743,8 +992,11 @@ CONFIG_INOTIFY_USER=y # # DOS/FAT/NT Filesystems # +CONFIG_FAT_FS=m # CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # @@ -780,9 +1032,16 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +CONFIG_UBIFS_FS=m +CONFIG_UBIFS_FS_XATTR=y +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -793,13 +1052,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -813,7 +1071,46 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set # @@ -822,13 +1119,16 @@ CONFIG_MSDOS_PARTITION=y CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=m +CONFIG_CRC_T10DIF=m # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y @@ -849,6 +1149,8 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -866,19 +1168,28 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -934,6 +1245,10 @@ CONFIG_CRYPTO_PCBC=y # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -962,8 +1277,8 @@ CONFIG_CRYPTO_DES=y # # Compression # -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set -- cgit v1.2.3 From 4c514a5ad1314b872e3185dabaf105c81d39d7e8 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Thu, 7 Aug 2008 14:08:27 +1000 Subject: powerpc/iseries: remove the old viocons driver This driver was declared obsolete over 2 years ago, the alternative console driver for legacy iSeries (hvc_iseries) was made the default over 1 year ago and this driver has been build broken for over 3 months, so remove it. Signed-off-by: Stephen Rothwell Signed-off-by: Linus Torvalds --- arch/powerpc/platforms/iseries/Kconfig | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/iseries/Kconfig b/arch/powerpc/platforms/iseries/Kconfig index ea3e541ac74..45ffd8e542f 100644 --- a/arch/powerpc/platforms/iseries/Kconfig +++ b/arch/powerpc/platforms/iseries/Kconfig @@ -7,15 +7,6 @@ config PPC_ISERIES menu "iSeries device drivers" depends on PPC_ISERIES -config VIOCONS - bool "iSeries Virtual Console Support (Obsolete)" - depends on !HVC_ISERIES - default n - help - This is the old virtual console driver for legacy iSeries. - You should use the iSeries Hypervisor Virtual Console - support instead. - config VIODASD tristate "iSeries Virtual I/O disk support" help @@ -38,5 +29,5 @@ endmenu config VIOPATH bool - depends on VIOCONS || VIODASD || VIOCD || VIOTAPE || ISERIES_VETH + depends on VIODASD || VIOCD || VIOTAPE || ISERIES_VETH default y -- cgit v1.2.3 From 9da1f7e69aa4545d45d3435865c56f1e67c4b26a Mon Sep 17 00:00:00 2001 From: Junio C Hamano Date: Thu, 7 Aug 2008 18:45:08 -0700 Subject: powerpc: Do not ignore arch/powerpc/include Back when .gitignore file was added to arch/powerpc/ in 06f2138 ([POWERPC] Add files build to .gitignore, 2006-11-26), there indeed was nothing tracked in the ignored hierarchy and ignoring everything made sense. But we have very many tracked files there these days, and having a higher level .gitignore that ignores everything is asking for future troubles.. This should have been part of b8b572e (powerpc: Move include files to arch/powerpc/include/asm, 2008-08-01). Signed-off-by: Junio C Hamano Acked-by: Stephen Rothwell Signed-off-by: Linus Torvalds --- arch/powerpc/.gitignore | 1 - 1 file changed, 1 deletion(-) delete mode 100644 arch/powerpc/.gitignore (limited to 'arch/powerpc') diff --git a/arch/powerpc/.gitignore b/arch/powerpc/.gitignore deleted file mode 100644 index a1a869c8c84..00000000000 --- a/arch/powerpc/.gitignore +++ /dev/null @@ -1 +0,0 @@ -include -- cgit v1.2.3 From b79998fc2e1144919b6b02acbd407a5db1f80ac0 Mon Sep 17 00:00:00 2001 From: Nathan Fontenot Date: Thu, 31 Jul 2008 02:23:27 +1000 Subject: powerpc: Zero fill the return values of rtas argument buffer The kernel copy of the rtas args struct contains the return value(s) for the specified rtas call. These are copied back to user space with the assumption that every value has been set by the rtas call, which turns out to be not always true. Thus userspace can see random values and think the call failed when in fact it succeeded, but for some reason didn't set one of the return values. This fixes the problem by zeroing out the return value fields of the rtas args struct before processing the rtas call. Signed-off-by: Nathan Fontenot Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/rtas.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index c680f1bbd38..1f8505c2354 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -792,6 +792,9 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs) if (args.token == RTAS_UNKNOWN_SERVICE) return -EINVAL; + args.rets = &args.args[nargs]; + memset(args.rets, 0, args.nret * sizeof(rtas_arg_t)); + /* Need to handle ibm,suspend_me call specially */ if (args.token == ibm_suspend_me_token) { rc = rtas_ibm_suspend_me(&args); @@ -808,8 +811,6 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs) enter_rtas(__pa(&rtas.args)); args = rtas.args; - args.rets = &args.args[nargs]; - /* A -1 return code indicates that the last command couldn't be completed due to a hardware error. */ if (args.rets[0] == -1) -- cgit v1.2.3 From 8db13a0e1e87ae2741ca1677caa90e9592c4cc43 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 31 Jul 2008 15:24:13 +1000 Subject: powerpc/pci: Don't keep ISA memory hole resources in the tree When we have an ISA memory hole (ie, a PCI window that allows us to generate PCI memory cycles at low PCI address) mixed with other resources using a different CPU <=> PCI mapping, we must not keep the ISA hole in the bridge resource list. If we do, things might start trying to allocate device resources in there and will get the PCI addresses wrong. This fixes it by arranging to remove the ISA memory hole resource in this case. This fixes various cases of PCMCIA breakage on PowerBooks using the MPC106 "grackle" bridge. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/pci-common.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 224e9a11765..ea0c61e09b7 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -650,11 +650,18 @@ void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose, } } - /* Out of paranoia, let's put the ISA hole last if any */ - if (isa_hole >= 0 && memno > 0 && isa_hole != (memno-1)) { - struct resource tmp = hose->mem_resources[isa_hole]; - hose->mem_resources[isa_hole] = hose->mem_resources[memno-1]; - hose->mem_resources[memno-1] = tmp; + /* If there's an ISA hole and the pci_mem_offset is -not- matching + * the ISA hole offset, then we need to remove the ISA hole from + * the resource list for that brige + */ + if (isa_hole >= 0 && hose->pci_mem_offset != isa_mb) { + unsigned int next = isa_hole + 1; + printk(KERN_INFO " Removing ISA hole at 0x%016llx\n", isa_mb); + if (next < memno) + memmove(&hose->mem_resources[isa_hole], + &hose->mem_resources[next], + sizeof(struct resource) * (memno - next)); + hose->mem_resources[--memno].flags = 0; } } -- cgit v1.2.3 From bc033b63bbfeb6c4b4eb0a1d083c650e4a0d2af8 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 5 Aug 2008 16:19:56 +1000 Subject: powerpc/mm: Fix attribute confusion with htab_bolt_mapping() The function htab_bolt_mapping() is used to create permanent mappings in the MMU hash table, for example, in order to create the linear mapping of vmemmap. It's also used by early boot ioremap (before mem_init_done). However, the way ioremap uses it is incorrect as it passes it the protection flags in the "linux PTE" form while htab_bolt_mapping() expects them in the hash table format. This is made more confusing by the fact that some of those flags are actually in the same position in both cases. This fixes it all by making htab_bolt_mapping() take normal linux protection flags instead, and use a little helper to convert them to htab flags. Callers can now use the usual PAGE_* definitions safely. Signed-off-by: Benjamin Herrenschmidt arch/powerpc/include/asm/mmu-hash64.h | 2 - arch/powerpc/mm/hash_utils_64.c | 65 ++++++++++++++++++++-------------- arch/powerpc/mm/init_64.c | 9 +--- 3 files changed, 44 insertions(+), 32 deletions(-) Signed-off-by: Paul Mackerras --- arch/powerpc/include/asm/mmu-hash64.h | 2 +- arch/powerpc/mm/hash_utils_64.c | 63 ++++++++++++++++++++++------------- arch/powerpc/mm/init_64.c | 9 ++--- 3 files changed, 43 insertions(+), 31 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h index 19c7a940349..c2df53c5ceb 100644 --- a/arch/powerpc/include/asm/mmu-hash64.h +++ b/arch/powerpc/include/asm/mmu-hash64.h @@ -278,7 +278,7 @@ extern int hash_huge_page(struct mm_struct *mm, unsigned long access, unsigned long trap); extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend, - unsigned long pstart, unsigned long mode, + unsigned long pstart, unsigned long prot, int psize, int ssize); extern void set_huge_psize(int psize); extern void add_gpage(unsigned long addr, unsigned long page_size, diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 5ce5a4dcd00..14be408dfc9 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -151,39 +151,53 @@ static struct mmu_psize_def mmu_psize_defaults_gp[] = { }, }; +static unsigned long htab_convert_pte_flags(unsigned long pteflags) +{ + unsigned long rflags = pteflags & 0x1fa; + + /* _PAGE_EXEC -> NOEXEC */ + if ((pteflags & _PAGE_EXEC) == 0) + rflags |= HPTE_R_N; + + /* PP bits. PAGE_USER is already PP bit 0x2, so we only + * need to add in 0x1 if it's a read-only user page + */ + if ((pteflags & _PAGE_USER) && !((pteflags & _PAGE_RW) && + (pteflags & _PAGE_DIRTY))) + rflags |= 1; + + /* Always add C */ + return rflags | HPTE_R_C; +} int htab_bolt_mapping(unsigned long vstart, unsigned long vend, - unsigned long pstart, unsigned long mode, + unsigned long pstart, unsigned long prot, int psize, int ssize) { unsigned long vaddr, paddr; unsigned int step, shift; - unsigned long tmp_mode; int ret = 0; shift = mmu_psize_defs[psize].shift; step = 1 << shift; + prot = htab_convert_pte_flags(prot); + + DBG("htab_bolt_mapping(%lx..%lx -> %lx (%lx,%d,%d)\n", + vstart, vend, pstart, prot, psize, ssize); + for (vaddr = vstart, paddr = pstart; vaddr < vend; vaddr += step, paddr += step) { unsigned long hash, hpteg; unsigned long vsid = get_kernel_vsid(vaddr, ssize); unsigned long va = hpt_va(vaddr, vsid, ssize); - tmp_mode = mode; - - /* Make non-kernel text non-executable */ - if (!in_kernel_text(vaddr)) - tmp_mode = mode | HPTE_R_N; - hash = hpt_hash(va, shift, ssize); hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP); - DBG("htab_bolt_mapping: calling %p\n", ppc_md.hpte_insert); - BUG_ON(!ppc_md.hpte_insert); - ret = ppc_md.hpte_insert(hpteg, va, paddr, - tmp_mode, HPTE_V_BOLTED, psize, ssize); + ret = ppc_md.hpte_insert(hpteg, va, paddr, prot, + HPTE_V_BOLTED, psize, ssize); if (ret < 0) break; @@ -519,9 +533,9 @@ static unsigned long __init htab_get_table_size(void) #ifdef CONFIG_MEMORY_HOTPLUG void create_section_mapping(unsigned long start, unsigned long end) { - BUG_ON(htab_bolt_mapping(start, end, __pa(start), - _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX, - mmu_linear_psize, mmu_kernel_ssize)); + BUG_ON(htab_bolt_mapping(start, end, __pa(start), + PAGE_KERNEL, mmu_linear_psize, + mmu_kernel_ssize)); } int remove_section_mapping(unsigned long start, unsigned long end) @@ -570,7 +584,7 @@ void __init htab_initialize(void) { unsigned long table; unsigned long pteg_count; - unsigned long mode_rw; + unsigned long prot, tprot; unsigned long base = 0, size = 0, limit; int i; @@ -628,7 +642,7 @@ void __init htab_initialize(void) mtspr(SPRN_SDR1, _SDR1); } - mode_rw = _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX; + prot = PAGE_KERNEL; #ifdef CONFIG_DEBUG_PAGEALLOC linear_map_hash_count = lmb_end_of_DRAM() >> PAGE_SHIFT; @@ -646,8 +660,10 @@ void __init htab_initialize(void) for (i=0; i < lmb.memory.cnt; i++) { base = (unsigned long)__va(lmb.memory.region[i].base); size = lmb.memory.region[i].size; + tprot = prot | (in_kernel_text(base) ? _PAGE_EXEC : 0); - DBG("creating mapping for region: %lx : %lx\n", base, size); + DBG("creating mapping for region: %lx..%lx (prot: %x)\n", + base, size, tprot); #ifdef CONFIG_U3_DART /* Do not map the DART space. Fortunately, it will be aligned @@ -664,21 +680,21 @@ void __init htab_initialize(void) unsigned long dart_table_end = dart_tablebase + 16 * MB; if (base != dart_tablebase) BUG_ON(htab_bolt_mapping(base, dart_tablebase, - __pa(base), mode_rw, + __pa(base), tprot, mmu_linear_psize, mmu_kernel_ssize)); if ((base + size) > dart_table_end) BUG_ON(htab_bolt_mapping(dart_tablebase+16*MB, base + size, __pa(dart_table_end), - mode_rw, + tprot, mmu_linear_psize, mmu_kernel_ssize)); continue; } #endif /* CONFIG_U3_DART */ BUG_ON(htab_bolt_mapping(base, base + size, __pa(base), - mode_rw, mmu_linear_psize, mmu_kernel_ssize)); + tprot, mmu_linear_psize, mmu_kernel_ssize)); } /* @@ -696,7 +712,7 @@ void __init htab_initialize(void) tce_alloc_start = base + size + 1; BUG_ON(htab_bolt_mapping(tce_alloc_start, tce_alloc_end, - __pa(tce_alloc_start), mode_rw, + __pa(tce_alloc_start), prot, mmu_linear_psize, mmu_kernel_ssize)); } @@ -1117,8 +1133,7 @@ static void kernel_map_linear_page(unsigned long vaddr, unsigned long lmi) unsigned long hash, hpteg; unsigned long vsid = get_kernel_vsid(vaddr, mmu_kernel_ssize); unsigned long va = hpt_va(vaddr, vsid, mmu_kernel_ssize); - unsigned long mode = _PAGE_ACCESSED | _PAGE_DIRTY | - _PAGE_COHERENT | PP_RWXX | HPTE_R_N; + unsigned long mode = htab_convert_pte_flags(PAGE_KERNEL); int ret; hash = hpt_hash(va, PAGE_SHIFT, mmu_kernel_ssize); diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index 4f7df85129d..036fe2f10c7 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -206,13 +206,10 @@ static int __meminit vmemmap_populated(unsigned long start, int page_size) int __meminit vmemmap_populate(struct page *start_page, unsigned long nr_pages, int node) { - unsigned long mode_rw; unsigned long start = (unsigned long)start_page; unsigned long end = (unsigned long)(start_page + nr_pages); unsigned long page_size = 1 << mmu_psize_defs[mmu_vmemmap_psize].shift; - mode_rw = _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX; - /* Align to the page size of the linear mapping. */ start = _ALIGN_DOWN(start, page_size); @@ -230,9 +227,9 @@ int __meminit vmemmap_populate(struct page *start_page, pr_debug("vmemmap %08lx allocated at %p, physical %08lx.\n", start, p, __pa(p)); - mapped = htab_bolt_mapping(start, start + page_size, - __pa(p), mode_rw, mmu_vmemmap_psize, - mmu_kernel_ssize); + mapped = htab_bolt_mapping(start, start + page_size, __pa(p), + PAGE_KERNEL, mmu_vmemmap_psize, + mmu_kernel_ssize); BUG_ON(mapped < 0); } -- cgit v1.2.3 From 0afd2ac9a56767b4fc8dfb6aa086fc05fc324fda Mon Sep 17 00:00:00 2001 From: Junio C Hamano Date: Thu, 7 Aug 2008 18:45:08 -0700 Subject: powerpc: Do not ignore arch/powerpc/include Back when .gitignore file was added to arch/powerpc/ in 06f2138 ([POWERPC] Add files build to .gitignore, 2006-11-26), there indeed was nothing tracked in the ignored hierarchy and ignoring everything made sense. But we have very many tracked files there these days, and having a higher level .gitignore that ignores everything is asking for future troubles.. This should have been part of b8b572e (powerpc: Move include files to arch/powerpc/include/asm, 2008-08-01). Signed-off-by: Junio C Hamano Acked-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- arch/powerpc/.gitignore | 1 - 1 file changed, 1 deletion(-) delete mode 100644 arch/powerpc/.gitignore (limited to 'arch/powerpc') diff --git a/arch/powerpc/.gitignore b/arch/powerpc/.gitignore deleted file mode 100644 index a1a869c8c84..00000000000 --- a/arch/powerpc/.gitignore +++ /dev/null @@ -1 +0,0 @@ -include -- cgit v1.2.3 From 912985dce45ef18fcdd9f5439fef054e0e22302a Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Tue, 12 Aug 2008 17:52:52 -0500 Subject: mm: Make generic weak get_user_pages_fast and EXPORT_GPL it Out of line get_user_pages_fast fallback implementation, make it a weak symbol, get rid of CONFIG_HAVE_GET_USER_PAGES_FAST. Export the symbol to modules so lguest can use it. Signed-off-by: Nick Piggin Signed-off-by: Rusty Russell --- arch/powerpc/Kconfig | 3 --- 1 file changed, 3 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 63c9cafda9c..587da5e0990 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -42,9 +42,6 @@ config GENERIC_HARDIRQS bool default y -config HAVE_GET_USER_PAGES_FAST - def_bool PPC64 - config HAVE_SETUP_PER_CPU_AREA def_bool PPC64 -- cgit v1.2.3