From 917f0af9e5a9ceecf9e72537fabb501254ba321d Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 9 Jun 2008 14:01:46 +1000 Subject: powerpc: Remove arch/ppc and include/asm-ppc All the maintained platforms are now in arch/powerpc, so the old arch/ppc stuff can now go away. Acked-by: Adrian Bunk Acked-by: Arnd Bergmann Acked-by: Becky Bruce Acked-by: Benjamin Herrenschmidt Acked-by: Geert Uytterhoeven Acked-by: Grant Likely Acked-by: Jochen Friedrich Acked-by: John Linn Acked-by: Jon Loeliger Acked-by: Josh Boyer Acked-by: Kumar Gala Acked-by: Olof Johansson Acked-by: Peter Korsgaard Acked-by: Scott Wood Acked-by: Sean MacLennan Acked-by: Segher Boessenkool Acked-by: Stefan Roese Acked-by: Stephen Neuendorffer Acked-by: Wolfgang Denk Signed-off-by: Paul Mackerras --- arch/ppc/8xx_io/enet.c | 982 ------------------------------------------------- 1 file changed, 982 deletions(-) delete mode 100644 arch/ppc/8xx_io/enet.c (limited to 'arch/ppc/8xx_io/enet.c') diff --git a/arch/ppc/8xx_io/enet.c b/arch/ppc/8xx_io/enet.c deleted file mode 100644 index 5899aea1644..00000000000 --- a/arch/ppc/8xx_io/enet.c +++ /dev/null @@ -1,982 +0,0 @@ -/* - * Ethernet driver for Motorola MPC8xx. - * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) - * - * I copied the basic skeleton from the lance driver, because I did not - * know how to write the Linux driver, but I did know how the LANCE worked. - * - * This version of the driver is somewhat selectable for the different - * processor/board combinations. It works for the boards I know about - * now, and should be easily modified to include others. Some of the - * configuration information is contained in and the - * remainder is here. - * - * Buffer descriptors are kept in the CPM dual port RAM, and the frame - * buffers are in the host memory. - * - * Right now, I am very watseful with the buffers. I allocate memory - * pages and then divide them into 2K frame buffers. This way I know I - * have buffers large enough to hold one frame within one buffer descriptor. - * Once I get this working, I will use 64 or 128 byte CPM buffers, which - * will be much more memory efficient and will easily handle lots of - * small packets. - * - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -/* - * Theory of Operation - * - * The MPC8xx CPM performs the Ethernet processing on SCC1. It can use - * an aribtrary number of buffers on byte boundaries, but must have at - * least two receive buffers to prevent constant overrun conditions. - * - * The buffer descriptors are allocated from the CPM dual port memory - * with the data buffers allocated from host memory, just like all other - * serial communication protocols. The host memory buffers are allocated - * from the free page pool, and then divided into smaller receive and - * transmit buffers. The size of the buffers should be a power of two, - * since that nicely divides the page. This creates a ring buffer - * structure similar to the LANCE and other controllers. - * - * Like the LANCE driver: - * The driver runs as two independent, single-threaded flows of control. One - * is the send-packet routine, which enforces single-threaded use by the - * cep->tx_busy flag. The other thread is the interrupt handler, which is - * single threaded by the hardware and other software. - * - * The send packet thread has partial control over the Tx ring and the - * 'cep->tx_busy' flag. It sets the tx_busy flag whenever it's queuing a Tx - * packet. If the next queue slot is empty, it clears the tx_busy flag when - * finished otherwise it sets the 'lp->tx_full' flag. - * - * The MBX has a control register external to the MPC8xx that has some - * control of the Ethernet interface. Information is in the manual for - * your board. - * - * The RPX boards have an external control/status register. Consult the - * programming documents for details unique to your board. - * - * For the TQM8xx(L) modules, there is no control register interface. - * All functions are directly controlled using I/O pins. See . - */ - -/* The transmitter timeout - */ -#define TX_TIMEOUT (2*HZ) - -/* The number of Tx and Rx buffers. These are allocated from the page - * pool. The code may assume these are power of two, so it is best - * to keep them that size. - * We don't need to allocate pages for the transmitter. We just use - * the skbuffer directly. - */ -#ifdef CONFIG_ENET_BIG_BUFFERS -#define CPM_ENET_RX_PAGES 32 -#define CPM_ENET_RX_FRSIZE 2048 -#define CPM_ENET_RX_FRPPG (PAGE_SIZE / CPM_ENET_RX_FRSIZE) -#define RX_RING_SIZE (CPM_ENET_RX_FRPPG * CPM_ENET_RX_PAGES) -#define TX_RING_SIZE 64 /* Must be power of two */ -#define TX_RING_MOD_MASK 63 /* for this to work */ -#else -#define CPM_ENET_RX_PAGES 4 -#define CPM_ENET_RX_FRSIZE 2048 -#define CPM_ENET_RX_FRPPG (PAGE_SIZE / CPM_ENET_RX_FRSIZE) -#define RX_RING_SIZE (CPM_ENET_RX_FRPPG * CPM_ENET_RX_PAGES) -#define TX_RING_SIZE 8 /* Must be power of two */ -#define TX_RING_MOD_MASK 7 /* for this to work */ -#endif - -/* The CPM stores dest/src/type, data, and checksum for receive packets. - */ -#define PKT_MAXBUF_SIZE 1518 -#define PKT_MINBUF_SIZE 64 -#define PKT_MAXBLR_SIZE 1520 - -/* The CPM buffer descriptors track the ring buffers. The rx_bd_base and - * tx_bd_base always point to the base of the buffer descriptors. The - * cur_rx and cur_tx point to the currently available buffer. - * The dirty_tx tracks the current buffer that is being sent by the - * controller. The cur_tx and dirty_tx are equal under both completely - * empty and completely full conditions. The empty/ready indicator in - * the buffer descriptor determines the actual condition. - */ -struct scc_enet_private { - /* The saved address of a sent-in-place packet/buffer, for skfree(). */ - struct sk_buff* tx_skbuff[TX_RING_SIZE]; - ushort skb_cur; - ushort skb_dirty; - - /* CPM dual port RAM relative addresses. - */ - cbd_t *rx_bd_base; /* Address of Rx and Tx buffers. */ - cbd_t *tx_bd_base; - cbd_t *cur_rx, *cur_tx; /* The next free ring entry */ - cbd_t *dirty_tx; /* The ring entries to be free()ed. */ - scc_t *sccp; - - /* Virtual addresses for the receive buffers because we can't - * do a __va() on them anymore. - */ - unsigned char *rx_vaddr[RX_RING_SIZE]; - struct net_device_stats stats; - uint tx_full; - spinlock_t lock; -}; - -static int scc_enet_open(struct net_device *dev); -static int scc_enet_start_xmit(struct sk_buff *skb, struct net_device *dev); -static int scc_enet_rx(struct net_device *dev); -static void scc_enet_interrupt(void *dev_id); -static int scc_enet_close(struct net_device *dev); -static struct net_device_stats *scc_enet_get_stats(struct net_device *dev); -static void set_multicast_list(struct net_device *dev); - -/* Get this from various configuration locations (depends on board). -*/ -/*static ushort my_enet_addr[] = { 0x0800, 0x3e26, 0x1559 };*/ - -/* Typically, 860(T) boards use SCC1 for Ethernet, and other 8xx boards - * use SCC2. Some even may use SCC3. - * This is easily extended if necessary. - */ -#if defined(CONFIG_SCC3_ENET) -#define CPM_CR_ENET CPM_CR_CH_SCC3 -#define PROFF_ENET PROFF_SCC3 -#define SCC_ENET 2 /* Index, not number! */ -#define CPMVEC_ENET CPMVEC_SCC3 -#elif defined(CONFIG_SCC2_ENET) -#define CPM_CR_ENET CPM_CR_CH_SCC2 -#define PROFF_ENET PROFF_SCC2 -#define SCC_ENET 1 /* Index, not number! */ -#define CPMVEC_ENET CPMVEC_SCC2 -#elif defined(CONFIG_SCC1_ENET) -#define CPM_CR_ENET CPM_CR_CH_SCC1 -#define PROFF_ENET PROFF_SCC1 -#define SCC_ENET 0 /* Index, not number! */ -#define CPMVEC_ENET CPMVEC_SCC1 -#else -#error CONFIG_SCCx_ENET not defined -#endif - -static int -scc_enet_open(struct net_device *dev) -{ - - /* I should reset the ring buffers here, but I don't yet know - * a simple way to do that. - */ - - netif_start_queue(dev); - return 0; /* Always succeed */ -} - -static int -scc_enet_start_xmit(struct sk_buff *skb, struct net_device *dev) -{ - struct scc_enet_private *cep = (struct scc_enet_private *)dev->priv; - volatile cbd_t *bdp; - - /* Fill in a Tx ring entry */ - bdp = cep->cur_tx; - -#ifndef final_version - if (bdp->cbd_sc & BD_ENET_TX_READY) { - /* Ooops. All transmit buffers are full. Bail out. - * This should not happen, since cep->tx_busy should be set. - */ - printk("%s: tx queue full!.\n", dev->name); - return 1; - } -#endif - - /* Clear all of the status flags. - */ - bdp->cbd_sc &= ~BD_ENET_TX_STATS; - - /* If the frame is short, tell CPM to pad it. - */ - if (skb->len <= ETH_ZLEN) - bdp->cbd_sc |= BD_ENET_TX_PAD; - else - bdp->cbd_sc &= ~BD_ENET_TX_PAD; - - /* Set buffer length and buffer pointer. - */ - bdp->cbd_datlen = skb->len; - bdp->cbd_bufaddr = __pa(skb->data); - - /* Save skb pointer. - */ - cep->tx_skbuff[cep->skb_cur] = skb; - - cep->stats.tx_bytes += skb->len; - cep->skb_cur = (cep->skb_cur+1) & TX_RING_MOD_MASK; - - /* Push the data cache so the CPM does not get stale memory - * data. - */ - flush_dcache_range((unsigned long)(skb->data), - (unsigned long)(skb->data + skb->len)); - - spin_lock_irq(&cep->lock); - - /* Send it on its way. Tell CPM its ready, interrupt when done, - * its the last BD of the frame, and to put the CRC on the end. - */ - bdp->cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_INTR | BD_ENET_TX_LAST | BD_ENET_TX_TC); - - dev->trans_start = jiffies; - - /* If this was the last BD in the ring, start at the beginning again. - */ - if (bdp->cbd_sc & BD_ENET_TX_WRAP) - bdp = cep->tx_bd_base; - else - bdp++; - - if (bdp->cbd_sc & BD_ENET_TX_READY) { - netif_stop_queue(dev); - cep->tx_full = 1; - } - - cep->cur_tx = (cbd_t *)bdp; - - spin_unlock_irq(&cep->lock); - - return 0; -} - -static void -scc_enet_timeout(struct net_device *dev) -{ - struct scc_enet_private *cep = (struct scc_enet_private *)dev->priv; - - printk("%s: transmit timed out.\n", dev->name); - cep->stats.tx_errors++; -#ifndef final_version - { - int i; - cbd_t *bdp; - printk(" Ring data dump: cur_tx %p%s cur_rx %p.\n", - cep->cur_tx, cep->tx_full ? " (full)" : "", - cep->cur_rx); - bdp = cep->tx_bd_base; - for (i = 0 ; i < TX_RING_SIZE; i++, bdp++) - printk("%04x %04x %08x\n", - bdp->cbd_sc, - bdp->cbd_datlen, - bdp->cbd_bufaddr); - bdp = cep->rx_bd_base; - for (i = 0 ; i < RX_RING_SIZE; i++, bdp++) - printk("%04x %04x %08x\n", - bdp->cbd_sc, - bdp->cbd_datlen, - bdp->cbd_bufaddr); - } -#endif - if (!cep->tx_full) - netif_wake_queue(dev); -} - -/* The interrupt handler. - * This is called from the CPM handler, not the MPC core interrupt. - */ -static void -scc_enet_interrupt(void *dev_id) -{ - struct net_device *dev = dev_id; - volatile struct scc_enet_private *cep; - volatile cbd_t *bdp; - ushort int_events; - int must_restart; - - cep = (struct scc_enet_private *)dev->priv; - - /* Get the interrupt events that caused us to be here. - */ - int_events = cep->sccp->scc_scce; - cep->sccp->scc_scce = int_events; - must_restart = 0; - - /* Handle receive event in its own function. - */ - if (int_events & SCCE_ENET_RXF) - scc_enet_rx(dev_id); - - /* Check for a transmit error. The manual is a little unclear - * about this, so the debug code until I get it figured out. It - * appears that if TXE is set, then TXB is not set. However, - * if carrier sense is lost during frame transmission, the TXE - * bit is set, "and continues the buffer transmission normally." - * I don't know if "normally" implies TXB is set when the buffer - * descriptor is closed.....trial and error :-). - */ - - /* Transmit OK, or non-fatal error. Update the buffer descriptors. - */ - if (int_events & (SCCE_ENET_TXE | SCCE_ENET_TXB)) { - spin_lock(&cep->lock); - bdp = cep->dirty_tx; - while ((bdp->cbd_sc&BD_ENET_TX_READY)==0) { - if ((bdp==cep->cur_tx) && (cep->tx_full == 0)) - break; - - if (bdp->cbd_sc & BD_ENET_TX_HB) /* No heartbeat */ - cep->stats.tx_heartbeat_errors++; - if (bdp->cbd_sc & BD_ENET_TX_LC) /* Late collision */ - cep->stats.tx_window_errors++; - if (bdp->cbd_sc & BD_ENET_TX_RL) /* Retrans limit */ - cep->stats.tx_aborted_errors++; - if (bdp->cbd_sc & BD_ENET_TX_UN) /* Underrun */ - cep->stats.tx_fifo_errors++; - if (bdp->cbd_sc & BD_ENET_TX_CSL) /* Carrier lost */ - cep->stats.tx_carrier_errors++; - - - /* No heartbeat or Lost carrier are not really bad errors. - * The others require a restart transmit command. - */ - if (bdp->cbd_sc & - (BD_ENET_TX_LC | BD_ENET_TX_RL | BD_ENET_TX_UN)) { - must_restart = 1; - cep->stats.tx_errors++; - } - - cep->stats.tx_packets++; - - /* Deferred means some collisions occurred during transmit, - * but we eventually sent the packet OK. - */ - if (bdp->cbd_sc & BD_ENET_TX_DEF) - cep->stats.collisions++; - - /* Free the sk buffer associated with this last transmit. - */ - dev_kfree_skb_irq(cep->tx_skbuff[cep->skb_dirty]); - cep->skb_dirty = (cep->skb_dirty + 1) & TX_RING_MOD_MASK; - - /* Update pointer to next buffer descriptor to be transmitted. - */ - if (bdp->cbd_sc & BD_ENET_TX_WRAP) - bdp = cep->tx_bd_base; - else - bdp++; - - /* I don't know if we can be held off from processing these - * interrupts for more than one frame time. I really hope - * not. In such a case, we would now want to check the - * currently available BD (cur_tx) and determine if any - * buffers between the dirty_tx and cur_tx have also been - * sent. We would want to process anything in between that - * does not have BD_ENET_TX_READY set. - */ - - /* Since we have freed up a buffer, the ring is no longer - * full. - */ - if (cep->tx_full) { - cep->tx_full = 0; - if (netif_queue_stopped(dev)) - netif_wake_queue(dev); - } - - cep->dirty_tx = (cbd_t *)bdp; - } - - if (must_restart) { - volatile cpm8xx_t *cp; - - /* Some transmit errors cause the transmitter to shut - * down. We now issue a restart transmit. Since the - * errors close the BD and update the pointers, the restart - * _should_ pick up without having to reset any of our - * pointers either. - */ - cp = cpmp; - cp->cp_cpcr = - mk_cr_cmd(CPM_CR_ENET, CPM_CR_RESTART_TX) | CPM_CR_FLG; - while (cp->cp_cpcr & CPM_CR_FLG); - } - spin_unlock(&cep->lock); - } - - /* Check for receive busy, i.e. packets coming but no place to - * put them. This "can't happen" because the receive interrupt - * is tossing previous frames. - */ - if (int_events & SCCE_ENET_BSY) { - cep->stats.rx_dropped++; - printk("CPM ENET: BSY can't happen.\n"); - } - - return; -} - -/* During a receive, the cur_rx points to the current incoming buffer. - * When we update through the ring, if the next incoming buffer has - * not been given to the system, we just set the empty indicator, - * effectively tossing the packet. - */ -static int -scc_enet_rx(struct net_device *dev) -{ - struct scc_enet_private *cep; - volatile cbd_t *bdp; - struct sk_buff *skb; - ushort pkt_len; - - cep = (struct scc_enet_private *)dev->priv; - - /* First, grab all of the stats for the incoming packet. - * These get messed up if we get called due to a busy condition. - */ - bdp = cep->cur_rx; - -for (;;) { - if (bdp->cbd_sc & BD_ENET_RX_EMPTY) - break; - -#ifndef final_version - /* Since we have allocated space to hold a complete frame, both - * the first and last indicators should be set. - */ - if ((bdp->cbd_sc & (BD_ENET_RX_FIRST | BD_ENET_RX_LAST)) != - (BD_ENET_RX_FIRST | BD_ENET_RX_LAST)) - printk("CPM ENET: rcv is not first+last\n"); -#endif - - /* Frame too long or too short. - */ - if (bdp->cbd_sc & (BD_ENET_RX_LG | BD_ENET_RX_SH)) - cep->stats.rx_length_errors++; - if (bdp->cbd_sc & BD_ENET_RX_NO) /* Frame alignment */ - cep->stats.rx_frame_errors++; - if (bdp->cbd_sc & BD_ENET_RX_CR) /* CRC Error */ - cep->stats.rx_crc_errors++; - if (bdp->cbd_sc & BD_ENET_RX_OV) /* FIFO overrun */ - cep->stats.rx_crc_errors++; - - /* Report late collisions as a frame error. - * On this error, the BD is closed, but we don't know what we - * have in the buffer. So, just drop this frame on the floor. - */ - if (bdp->cbd_sc & BD_ENET_RX_CL) { - cep->stats.rx_frame_errors++; - } - else { - - /* Process the incoming frame. - */ - cep->stats.rx_packets++; - pkt_len = bdp->cbd_datlen; - cep->stats.rx_bytes += pkt_len; - - /* This does 16 byte alignment, much more than we need. - * The packet length includes FCS, but we don't want to - * include that when passing upstream as it messes up - * bridging applications. - */ - skb = dev_alloc_skb(pkt_len-4); - - if (skb == NULL) { - printk("%s: Memory squeeze, dropping packet.\n", dev->name); - cep->stats.rx_dropped++; - } - else { - skb_put(skb,pkt_len-4); /* Make room */ - skb_copy_to_linear_data(skb, - cep->rx_vaddr[bdp - cep->rx_bd_base], - pkt_len-4); - skb->protocol=eth_type_trans(skb,dev); - netif_rx(skb); - } - } - - /* Clear the status flags for this buffer. - */ - bdp->cbd_sc &= ~BD_ENET_RX_STATS; - - /* Mark the buffer empty. - */ - bdp->cbd_sc |= BD_ENET_RX_EMPTY; - - /* Update BD pointer to next entry. - */ - if (bdp->cbd_sc & BD_ENET_RX_WRAP) - bdp = cep->rx_bd_base; - else - bdp++; - - } - cep->cur_rx = (cbd_t *)bdp; - - return 0; -} - -static int -scc_enet_close(struct net_device *dev) -{ - /* Don't know what to do yet. - */ - netif_stop_queue(dev); - - return 0; -} - -static struct net_device_stats *scc_enet_get_stats(struct net_device *dev) -{ - struct scc_enet_private *cep = (struct scc_enet_private *)dev->priv; - - return &cep->stats; -} - -/* Set or clear the multicast filter for this adaptor. - * Skeleton taken from sunlance driver. - * The CPM Ethernet implementation allows Multicast as well as individual - * MAC address filtering. Some of the drivers check to make sure it is - * a group multicast address, and discard those that are not. I guess I - * will do the same for now, but just remove the test if you want - * individual filtering as well (do the upper net layers want or support - * this kind of feature?). - */ - -static void set_multicast_list(struct net_device *dev) -{ - struct scc_enet_private *cep; - struct dev_mc_list *dmi; - u_char *mcptr, *tdptr; - volatile scc_enet_t *ep; - int i, j; - cep = (struct scc_enet_private *)dev->priv; - - /* Get pointer to SCC area in parameter RAM. - */ - ep = (scc_enet_t *)dev->base_addr; - - if (dev->flags&IFF_PROMISC) { - - /* Log any net taps. */ - printk("%s: Promiscuous mode enabled.\n", dev->name); - cep->sccp->scc_psmr |= SCC_PSMR_PRO; - } else { - - cep->sccp->scc_psmr &= ~SCC_PSMR_PRO; - - if (dev->flags & IFF_ALLMULTI) { - /* Catch all multicast addresses, so set the - * filter to all 1's. - */ - ep->sen_gaddr1 = 0xffff; - ep->sen_gaddr2 = 0xffff; - ep->sen_gaddr3 = 0xffff; - ep->sen_gaddr4 = 0xffff; - } - else { - /* Clear filter and add the addresses in the list. - */ - ep->sen_gaddr1 = 0; - ep->sen_gaddr2 = 0; - ep->sen_gaddr3 = 0; - ep->sen_gaddr4 = 0; - - dmi = dev->mc_list; - - for (i=0; imc_count; i++) { - - /* Only support group multicast for now. - */ - if (!(dmi->dmi_addr[0] & 1)) - continue; - - /* The address in dmi_addr is LSB first, - * and taddr is MSB first. We have to - * copy bytes MSB first from dmi_addr. - */ - mcptr = (u_char *)dmi->dmi_addr + 5; - tdptr = (u_char *)&ep->sen_taddrh; - for (j=0; j<6; j++) - *tdptr++ = *mcptr--; - - /* Ask CPM to run CRC and set bit in - * filter mask. - */ - cpmp->cp_cpcr = mk_cr_cmd(CPM_CR_ENET, CPM_CR_SET_GADDR) | CPM_CR_FLG; - /* this delay is necessary here -- Cort */ - udelay(10); - while (cpmp->cp_cpcr & CPM_CR_FLG); - } - } - } -} - -/* Initialize the CPM Ethernet on SCC. If EPPC-Bug loaded us, or performed - * some other network I/O, a whole bunch of this has already been set up. - * It is no big deal if we do it again, we just have to disable the - * transmit and receive to make sure we don't catch the CPM with some - * inconsistent control information. - */ -static int __init scc_enet_init(void) -{ - struct net_device *dev; - struct scc_enet_private *cep; - int i, j, k, err; - uint dp_offset; - unsigned char *eap, *ba; - dma_addr_t mem_addr; - bd_t *bd; - volatile cbd_t *bdp; - volatile cpm8xx_t *cp; - volatile scc_t *sccp; - volatile scc_enet_t *ep; - volatile immap_t *immap; - - cp = cpmp; /* Get pointer to Communication Processor */ - - immap = (immap_t *)(mfspr(SPRN_IMMR) & 0xFFFF0000); /* and to internal registers */ - - bd = (bd_t *)__res; - - dev = alloc_etherdev(sizeof(*cep)); - if (!dev) - return -ENOMEM; - - cep = dev->priv; - spin_lock_init(&cep->lock); - - /* Get pointer to SCC area in parameter RAM. - */ - ep = (scc_enet_t *)(&cp->cp_dparam[PROFF_ENET]); - - /* And another to the SCC register area. - */ - sccp = (volatile scc_t *)(&cp->cp_scc[SCC_ENET]); - cep->sccp = (scc_t *)sccp; /* Keep the pointer handy */ - - /* Disable receive and transmit in case EPPC-Bug started it. - */ - sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); - - /* Cookbook style from the MPC860 manual..... - * Not all of this is necessary if EPPC-Bug has initialized - * the network. - * So far we are lucky, all board configurations use the same - * pins, or at least the same I/O Port for these functions..... - * It can't last though...... - */ - -#if (defined(PA_ENET_RXD) && defined(PA_ENET_TXD)) - /* Configure port A pins for Txd and Rxd. - */ - immap->im_ioport.iop_papar |= (PA_ENET_RXD | PA_ENET_TXD); - immap->im_ioport.iop_padir &= ~(PA_ENET_RXD | PA_ENET_TXD); - immap->im_ioport.iop_paodr &= ~PA_ENET_TXD; -#elif (defined(PB_ENET_RXD) && defined(PB_ENET_TXD)) - /* Configure port B pins for Txd and Rxd. - */ - immap->im_cpm.cp_pbpar |= (PB_ENET_RXD | PB_ENET_TXD); - immap->im_cpm.cp_pbdir &= ~(PB_ENET_RXD | PB_ENET_TXD); - immap->im_cpm.cp_pbodr &= ~PB_ENET_TXD; -#else -#error Exactly ONE pair of PA_ENET_[RT]XD, PB_ENET_[RT]XD must be defined -#endif - -#if defined(PC_ENET_LBK) - /* Configure port C pins to disable External Loopback - */ - immap->im_ioport.iop_pcpar &= ~PC_ENET_LBK; - immap->im_ioport.iop_pcdir |= PC_ENET_LBK; - immap->im_ioport.iop_pcso &= ~PC_ENET_LBK; - immap->im_ioport.iop_pcdat &= ~PC_ENET_LBK; /* Disable Loopback */ -#endif /* PC_ENET_LBK */ - -#ifdef PE_ENET_TCLK - /* Configure port E for TCLK and RCLK. - */ - cp->cp_pepar |= (PE_ENET_TCLK | PE_ENET_RCLK); - cp->cp_pedir &= ~(PE_ENET_TCLK | PE_ENET_RCLK); - cp->cp_peso &= ~(PE_ENET_TCLK | PE_ENET_RCLK); -#else - /* Configure port A for TCLK and RCLK. - */ - immap->im_ioport.iop_papar |= (PA_ENET_TCLK | PA_ENET_RCLK); - immap->im_ioport.iop_padir &= ~(PA_ENET_TCLK | PA_ENET_RCLK); -#endif - - /* Configure port C pins to enable CLSN and RENA. - */ - immap->im_ioport.iop_pcpar &= ~(PC_ENET_CLSN | PC_ENET_RENA); - immap->im_ioport.iop_pcdir &= ~(PC_ENET_CLSN | PC_ENET_RENA); - immap->im_ioport.iop_pcso |= (PC_ENET_CLSN | PC_ENET_RENA); - - /* Configure Serial Interface clock routing. - * First, clear all SCC bits to zero, then set the ones we want. - */ - cp->cp_sicr &= ~SICR_ENET_MASK; - cp->cp_sicr |= SICR_ENET_CLKRT; - - /* Manual says set SDDR, but I can't find anything with that - * name. I think it is a misprint, and should be SDCR. This - * has already been set by the communication processor initialization. - */ - - /* Allocate space for the buffer descriptors in the DP ram. - * These are relative offsets in the DP ram address space. - * Initialize base addresses for the buffer descriptors. - */ - dp_offset = cpm_dpalloc(sizeof(cbd_t) * RX_RING_SIZE, 8); - ep->sen_genscc.scc_rbase = dp_offset; - cep->rx_bd_base = cpm_dpram_addr(dp_offset); - - dp_offset = cpm_dpalloc(sizeof(cbd_t) * TX_RING_SIZE, 8); - ep->sen_genscc.scc_tbase = dp_offset; - cep->tx_bd_base = cpm_dpram_addr(dp_offset); - - cep->dirty_tx = cep->cur_tx = cep->tx_bd_base; - cep->cur_rx = cep->rx_bd_base; - - /* Issue init Rx BD command for SCC. - * Manual says to perform an Init Rx parameters here. We have - * to perform both Rx and Tx because the SCC may have been - * already running. - * In addition, we have to do it later because we don't yet have - * all of the BD control/status set properly. - cp->cp_cpcr = mk_cr_cmd(CPM_CR_ENET, CPM_CR_INIT_RX) | CPM_CR_FLG; - while (cp->cp_cpcr & CPM_CR_FLG); - */ - - /* Initialize function code registers for big-endian. - */ - ep->sen_genscc.scc_rfcr = SCC_EB; - ep->sen_genscc.scc_tfcr = SCC_EB; - - /* Set maximum bytes per receive buffer. - * This appears to be an Ethernet frame size, not the buffer - * fragment size. It must be a multiple of four. - */ - ep->sen_genscc.scc_mrblr = PKT_MAXBLR_SIZE; - - /* Set CRC preset and mask. - */ - ep->sen_cpres = 0xffffffff; - ep->sen_cmask = 0xdebb20e3; - - ep->sen_crcec = 0; /* CRC Error counter */ - ep->sen_alec = 0; /* alignment error counter */ - ep->sen_disfc = 0; /* discard frame counter */ - - ep->sen_pads = 0x8888; /* Tx short frame pad character */ - ep->sen_retlim = 15; /* Retry limit threshold */ - - ep->sen_maxflr = PKT_MAXBUF_SIZE; /* maximum frame length register */ - ep->sen_minflr = PKT_MINBUF_SIZE; /* minimum frame length register */ - - ep->sen_maxd1 = PKT_MAXBLR_SIZE; /* maximum DMA1 length */ - ep->sen_maxd2 = PKT_MAXBLR_SIZE; /* maximum DMA2 length */ - - /* Clear hash tables. - */ - ep->sen_gaddr1 = 0; - ep->sen_gaddr2 = 0; - ep->sen_gaddr3 = 0; - ep->sen_gaddr4 = 0; - ep->sen_iaddr1 = 0; - ep->sen_iaddr2 = 0; - ep->sen_iaddr3 = 0; - ep->sen_iaddr4 = 0; - - /* Set Ethernet station address. - */ - eap = (unsigned char *)&(ep->sen_paddrh); - for (i=5; i>=0; i--) - *eap++ = dev->dev_addr[i] = bd->bi_enetaddr[i]; - - ep->sen_pper = 0; /* 'cause the book says so */ - ep->sen_taddrl = 0; /* temp address (LSB) */ - ep->sen_taddrm = 0; - ep->sen_taddrh = 0; /* temp address (MSB) */ - - /* Now allocate the host memory pages and initialize the - * buffer descriptors. - */ - bdp = cep->tx_bd_base; - for (i=0; icbd_sc = 0; - bdp->cbd_bufaddr = 0; - bdp++; - } - - /* Set the last buffer to wrap. - */ - bdp--; - bdp->cbd_sc |= BD_SC_WRAP; - - bdp = cep->rx_bd_base; - k = 0; - for (i=0; icbd_sc = BD_ENET_RX_EMPTY | BD_ENET_RX_INTR; - bdp->cbd_bufaddr = mem_addr; - cep->rx_vaddr[k++] = ba; - mem_addr += CPM_ENET_RX_FRSIZE; - ba += CPM_ENET_RX_FRSIZE; - bdp++; - } - } - - /* Set the last buffer to wrap. - */ - bdp--; - bdp->cbd_sc |= BD_SC_WRAP; - - /* Let's re-initialize the channel now. We have to do it later - * than the manual describes because we have just now finished - * the BD initialization. - */ - cp->cp_cpcr = mk_cr_cmd(CPM_CR_ENET, CPM_CR_INIT_TRX) | CPM_CR_FLG; - while (cp->cp_cpcr & CPM_CR_FLG); - - cep->skb_cur = cep->skb_dirty = 0; - - sccp->scc_scce = 0xffff; /* Clear any pending events */ - - /* Enable interrupts for transmit error, complete frame - * received, and any transmit buffer we have also set the - * interrupt flag. - */ - sccp->scc_sccm = (SCCE_ENET_TXE | SCCE_ENET_RXF | SCCE_ENET_TXB); - - /* Install our interrupt handler. - */ - cpm_install_handler(CPMVEC_ENET, scc_enet_interrupt, dev); - - /* Set GSMR_H to enable all normal operating modes. - * Set GSMR_L to enable Ethernet to MC68160. - */ - sccp->scc_gsmrh = 0; - sccp->scc_gsmrl = (SCC_GSMRL_TCI | SCC_GSMRL_TPL_48 | SCC_GSMRL_TPP_10 | SCC_GSMRL_MODE_ENET); - - /* Set sync/delimiters. - */ - sccp->scc_dsr = 0xd555; - - /* Set processing mode. Use Ethernet CRC, catch broadcast, and - * start frame search 22 bit times after RENA. - */ - sccp->scc_psmr = (SCC_PSMR_ENCRC | SCC_PSMR_NIB22); - - /* It is now OK to enable the Ethernet transmitter. - * Unfortunately, there are board implementation differences here. - */ -#if (!defined (PB_ENET_TENA) && defined (PC_ENET_TENA) && !defined (PE_ENET_TENA)) - immap->im_ioport.iop_pcpar |= PC_ENET_TENA; - immap->im_ioport.iop_pcdir &= ~PC_ENET_TENA; -#elif ( defined (PB_ENET_TENA) && !defined (PC_ENET_TENA) && !defined (PE_ENET_TENA)) - cp->cp_pbpar |= PB_ENET_TENA; - cp->cp_pbdir |= PB_ENET_TENA; -#elif ( !defined (PB_ENET_TENA) && !defined (PC_ENET_TENA) && defined (PE_ENET_TENA)) - cp->cp_pepar |= PE_ENET_TENA; - cp->cp_pedir &= ~PE_ENET_TENA; - cp->cp_peso |= PE_ENET_TENA; -#else -#error Configuration Error: define exactly ONE of PB_ENET_TENA, PC_ENET_TENA, PE_ENET_TENA -#endif - -#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC) - /* And while we are here, set the configuration to enable ethernet. - */ - *((volatile uint *)RPX_CSR_ADDR) &= ~BCSR0_ETHLPBK; - *((volatile uint *)RPX_CSR_ADDR) |= - (BCSR0_ETHEN | BCSR0_COLTESTDIS | BCSR0_FULLDPLXDIS); -#endif - -#ifdef CONFIG_BSEIP - /* BSE uses port B and C for PHY control. - */ - cp->cp_pbpar &= ~(PB_BSE_POWERUP | PB_BSE_FDXDIS); - cp->cp_pbdir |= (PB_BSE_POWERUP | PB_BSE_FDXDIS); - cp->cp_pbdat |= (PB_BSE_POWERUP | PB_BSE_FDXDIS); - - immap->im_ioport.iop_pcpar &= ~PC_BSE_LOOPBACK; - immap->im_ioport.iop_pcdir |= PC_BSE_LOOPBACK; - immap->im_ioport.iop_pcso &= ~PC_BSE_LOOPBACK; - immap->im_ioport.iop_pcdat &= ~PC_BSE_LOOPBACK; -#endif - -#ifdef CONFIG_FADS - cp->cp_pbpar |= PB_ENET_TENA; - cp->cp_pbdir |= PB_ENET_TENA; - - /* Enable the EEST PHY. - */ - *((volatile uint *)BCSR1) &= ~BCSR1_ETHEN; -#endif - - dev->base_addr = (unsigned long)ep; -#if 0 - dev->name = "CPM_ENET"; -#endif - - /* The CPM Ethernet specific entries in the device structure. */ - dev->open = scc_enet_open; - dev->hard_start_xmit = scc_enet_start_xmit; - dev->tx_timeout = scc_enet_timeout; - dev->watchdog_timeo = TX_TIMEOUT; - dev->stop = scc_enet_close; - dev->get_stats = scc_enet_get_stats; - dev->set_multicast_list = set_multicast_list; - - err = register_netdev(dev); - if (err) { - free_netdev(dev); - return err; - } - - /* And last, enable the transmit and receive processing. - */ - sccp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT); - - printk("%s: CPM ENET Version 0.2 on SCC%d, ", dev->name, SCC_ENET+1); - for (i=0; i<5; i++) - printk("%02x:", dev->dev_addr[i]); - printk("%02x\n", dev->dev_addr[5]); - - return 0; -} - -module_init(scc_enet_init); - -- cgit v1.2.3