From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- arch/ppc/platforms/powerpmc250.c | 383 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 383 insertions(+) create mode 100644 arch/ppc/platforms/powerpmc250.c (limited to 'arch/ppc/platforms/powerpmc250.c') diff --git a/arch/ppc/platforms/powerpmc250.c b/arch/ppc/platforms/powerpmc250.c new file mode 100644 index 00000000000..0abe15159e6 --- /dev/null +++ b/arch/ppc/platforms/powerpmc250.c @@ -0,0 +1,383 @@ +/* + * arch/ppc/platforms/powerpmc250.c + * + * Board setup routines for Force PowerPMC-250 Processor PMC + * + * Author: Troy Benjegerdes + * Borrowed heavily from prpmc750_*.c by + * Matt Porter + * + * 2001 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +extern void powerpmc250_find_bridges(void); +extern unsigned long loops_per_jiffy; + +static u_char powerpmc250_openpic_initsenses[] __initdata = +{ + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 1, /* PMC INTA (also MPC107 output interrupt INTA) */ + 1, /* PMC INTB (also I82559 Ethernet controller) */ + 1, /* PMC INTC */ + 1, /* PMC INTD */ + 0, /* DUART interrupt (active high) */ +}; + +static int +powerpmc250_show_cpuinfo(struct seq_file *m) +{ + seq_printf(m,"machine\t\t: Force PowerPMC250\n"); + + return 0; +} + +static void __init +powerpmc250_setup_arch(void) +{ + /* init to some ~sane value until calibrate_delay() runs */ + loops_per_jiffy = 50000000/HZ; + + /* Lookup PCI host bridges */ + powerpmc250_find_bridges(); + +#ifdef CONFIG_BLK_DEV_INITRD + if (initrd_start) + ROOT_DEV = Root_RAM0; + else +#endif +#ifdef CONFIG_ROOT_NFS + ROOT_DEV = Root_NFS; +#else + ROOT_DEV = Root_SDA2; +#endif + + printk("Force PowerPMC250 port (C) 2001 MontaVista Software, Inc. (source@mvista.com)\n"); +} + +#if 0 +/* + * Compute the PrPMC750's bus speed using the baud clock as a + * reference. + */ +unsigned long __init powerpmc250_get_bus_speed(void) +{ + unsigned long tbl_start, tbl_end; + unsigned long current_state, old_state, bus_speed; + unsigned char lcr, dll, dlm; + int baud_divisor, count; + + /* Read the UART's baud clock divisor */ + lcr = readb(PRPMC750_SERIAL_0_LCR); + writeb(lcr | UART_LCR_DLAB, PRPMC750_SERIAL_0_LCR); + dll = readb(PRPMC750_SERIAL_0_DLL); + dlm = readb(PRPMC750_SERIAL_0_DLM); + writeb(lcr & ~UART_LCR_DLAB, PRPMC750_SERIAL_0_LCR); + baud_divisor = (dlm << 8) | dll; + + /* + * Use the baud clock divisor and base baud clock + * to determine the baud rate and use that as + * the number of baud clock edges we use for + * the time base sample. Make it half the baud + * rate. + */ + count = PRPMC750_BASE_BAUD / (baud_divisor * 16); + + /* Find the first edge of the baud clock */ + old_state = readb(PRPMC750_STATUS_REG) & PRPMC750_BAUDOUT_MASK; + do { + current_state = readb(PRPMC750_STATUS_REG) & + PRPMC750_BAUDOUT_MASK; + } while(old_state == current_state); + + old_state = current_state; + + /* Get the starting time base value */ + tbl_start = get_tbl(); + + /* + * Loop until we have found a number of edges equal + * to half the count (half the baud rate) + */ + do { + do { + current_state = readb(PRPMC750_STATUS_REG) & + PRPMC750_BAUDOUT_MASK; + } while(old_state == current_state); + old_state = current_state; + } while (--count); + + /* Get the ending time base value */ + tbl_end = get_tbl(); + + /* Compute bus speed */ + bus_speed = (tbl_end-tbl_start)*128; + + return bus_speed; +} +#endif + +static void __init +powerpmc250_calibrate_decr(void) +{ + unsigned long freq; + int divisor = 4; + + //freq = powerpmc250_get_bus_speed(); +#warning hardcoded bus freq + freq = 100000000; + + tb_ticks_per_jiffy = freq / (HZ * divisor); + tb_to_us = mulhwu_scale_factor(freq/divisor, 1000000); +} + +static void +powerpmc250_restart(char *cmd) +{ + local_irq_disable(); + /* Hard reset */ + writeb(0x11, 0xfe000332); + while(1); +} + +static void +powerpmc250_halt(void) +{ + local_irq_disable(); + while (1); +} + +static void +powerpmc250_power_off(void) +{ + powerpmc250_halt(); +} + +static void __init +powerpmc250_init_IRQ(void) +{ + + OpenPIC_InitSenses = powerpmc250_openpic_initsenses; + OpenPIC_NumInitSenses = sizeof(powerpmc250_openpic_initsenses); + mpc10x_set_openpic(); +} + +/* + * Set BAT 3 to map 0xf0000000 to end of physical memory space. + */ +static __inline__ void +powerpmc250_set_bat(void) +{ + unsigned long bat3u, bat3l; + static int mapping_set = 0; + + if (!mapping_set) + { + __asm__ __volatile__( + " lis %0,0xf000\n \ + ori %1,%0,0x002a\n \ + ori %0,%0,0x1ffe\n \ + mtspr 0x21e,%0\n \ + mtspr 0x21f,%1\n \ + isync\n \ + sync " + : "=r" (bat3u), "=r" (bat3l)); + + mapping_set = 1; + } + return; +} + +static unsigned long __init +powerpmc250_find_end_of_memory(void) +{ + /* Cover I/O space with a BAT */ + /* yuck, better hope your ram size is a power of 2 -- paulus */ + powerpmc250_set_bat(); + + return mpc10x_get_mem_size(MPC10X_MEM_MAP_B); +} + +static void __init +powerpmc250_map_io(void) +{ + io_block_mapping(0xfe000000, 0xfe000000, 0x02000000, _PAGE_IO); +} + +void __init +platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + parse_bootinfo(find_bootinfo()); + +#ifdef CONFIG_BLK_DEV_INITRD + if ( r4 ) + { + initrd_start = r4 + KERNELBASE; + initrd_end = r5 + KERNELBASE; + } +#endif + + /* Copy cmd_line parameters */ + if ( r6) + { + *(char *)(r7 + KERNELBASE) = 0; + strcpy(cmd_line, (char *)(r6 + KERNELBASE)); + } + + isa_io_base = MPC10X_MAPB_ISA_IO_BASE; + isa_mem_base = MPC10X_MAPB_ISA_MEM_BASE; + pci_dram_offset = MPC10X_MAPB_DRAM_OFFSET; + + ppc_md.setup_arch = powerpmc250_setup_arch; + ppc_md.show_cpuinfo = powerpmc250_show_cpuinfo; + ppc_md.init_IRQ = powerpmc250_init_IRQ; + ppc_md.get_irq = openpic_get_irq; + + ppc_md.find_end_of_memory = powerpmc250_find_end_of_memory; + ppc_md.setup_io_mappings = powerpmc250_map_io; + + ppc_md.restart = powerpmc250_restart; + ppc_md.power_off = powerpmc250_power_off; + ppc_md.halt = powerpmc250_halt; + + /* PowerPMC250 has no timekeeper part */ + ppc_md.time_init = NULL; + ppc_md.get_rtc_time = NULL; + ppc_md.set_rtc_time = NULL; + ppc_md.calibrate_decr = powerpmc250_calibrate_decr; +} + + +/* + * (This used to be arch/ppc/platforms/powerpmc250_pci.c) + * + * PCI support for Force PowerPMC250 + * + */ + +#undef DEBUG +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif /* DEBUG */ + +static inline int __init +powerpmc250_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + {17, 0, 0, 0}, /* Device 11 - 82559 */ + {0, 0, 0, 0}, /* 12 */ + {0, 0, 0, 0}, /* 13 */ + {0, 0, 0, 0}, /* 14 */ + {0, 0, 0, 0}, /* 15 */ + {16, 17, 18, 19}, /* Device 16 - PMC A1?? */ + }; + const long min_idsel = 11, max_idsel = 16, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; +}; + +static int +powerpmc250_exclude_device(u_char bus, u_char devfn) +{ + /* + * While doing PCI Scan the MPC107 will 'detect' itself as + * device on the PCI Bus, will create an incorrect response and + * later will respond incorrectly to Configuration read coming + * from another device. + * + * The work around is that when doing a PCI Scan one + * should skip its own device number in the scan. + * + * The top IDsel is AD13 and the middle is AD14. + * + * -- Note from force + */ + + if ((bus == 0) && (PCI_SLOT(devfn) == 13 || PCI_SLOT(devfn) == 14)) { + return PCIBIOS_DEVICE_NOT_FOUND; + } + else { + return PCIBIOS_SUCCESSFUL; + } +} + +void __init +powerpmc250_find_bridges(void) +{ + struct pci_controller* hose; + + hose = pcibios_alloc_controller(); + if (!hose){ + printk("Can't allocate PCI 'hose' structure!!!\n"); + return; + } + + hose->first_busno = 0; + hose->last_busno = 0xff; + + if (mpc10x_bridge_init(hose, + MPC10X_MEM_MAP_B, + MPC10X_MEM_MAP_B, + MPC10X_MAPB_EUMB_BASE) == 0) { + + hose->mem_resources[0].end = 0xffffffff; + + hose->last_busno = pciauto_bus_scan(hose, hose->first_busno); + + /* ppc_md.pcibios_fixup = pcore_pcibios_fixup; */ + ppc_md.pci_swizzle = common_swizzle; + + ppc_md.pci_exclude_device = powerpmc250_exclude_device; + ppc_md.pci_map_irq = powerpmc250_map_irq; + } else { + if (ppc_md.progress) + ppc_md.progress("Bridge init failed", 0x100); + printk("Host bridge init failed\n"); + } + +} -- cgit v1.2.3