From a80cad950f2a562e60db1869dd29bc007c5a4b66 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Fri, 26 Jun 2009 07:05:39 +0000 Subject: sh: ms7724se: Add sh_eth support Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/sh/boards/mach-se/7724/setup.c | 106 +++++++++++++++++++++++++++++++++++- 1 file changed, 104 insertions(+), 2 deletions(-) (limited to 'arch/sh/boards/mach-se') diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index 9cd04bd558b..21d18005fb4 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -23,6 +23,8 @@ #include #include #include +#include +#include #include #include #include @@ -272,6 +274,34 @@ static struct platform_device keysc_device = { }, }; +/* SH Eth */ +static struct resource sh_eth_resources[] = { + [0] = { + .start = SH_ETH_ADDR, + .end = SH_ETH_ADDR + 0x1FC, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 91, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +struct sh_eth_plat_data sh_eth_plat = { + .phy = 0x1f, /* SMSC LAN8187 */ + .edmac_endian = EDMAC_LITTLE_ENDIAN, +}; + +static struct platform_device sh_eth_device = { + .name = "sh-eth", + .id = 0, + .dev = { + .platform_data = &sh_eth_plat, + }, + .num_resources = ARRAY_SIZE(sh_eth_resources), + .resource = sh_eth_resources, +}; + static struct platform_device *ms7724se_devices[] __initdata = { &heartbeat_device, &smc91x_eth_device, @@ -280,8 +310,57 @@ static struct platform_device *ms7724se_devices[] __initdata = { &ceu0_device, &ceu1_device, &keysc_device, + &sh_eth_device, }; +#define EEPROM_OP 0xBA206000 +#define EEPROM_ADR 0xBA206004 +#define EEPROM_DATA 0xBA20600C +#define EEPROM_STAT 0xBA206010 +#define EEPROM_STRT 0xBA206014 +static int __init sh_eth_is_eeprom_ready(void) +{ + int t = 10000; + + while (t--) { + if (!ctrl_inw(EEPROM_STAT)) + return 1; + cpu_relax(); + } + + printk(KERN_ERR "ms7724se can not access to eeprom\n"); + return 0; +} + +static void __init sh_eth_init(void) +{ + int i; + u16 mac[3]; + + /* check EEPROM status */ + if (!sh_eth_is_eeprom_ready()) + return; + + /* read MAC addr from EEPROM */ + for (i = 0 ; i < 3 ; i++) { + ctrl_outw(0x0, EEPROM_OP); /* read */ + ctrl_outw(i*2, EEPROM_ADR); + ctrl_outw(0x1, EEPROM_STRT); + if (!sh_eth_is_eeprom_ready()) + return; + + mac[i] = ctrl_inw(EEPROM_DATA); + mac[i] = ((mac[i] & 0xFF) << 8) | (mac[i] >> 8); /* swap */ + } + + /* reset sh-eth */ + ctrl_outl(0x1, SH_ETH_ADDR + 0x0); + + /* set MAC addr */ + ctrl_outl(((mac[0] << 16) | (mac[1])), SH_ETH_MAHR); + ctrl_outl((mac[2]), SH_ETH_MALR); +} + #define SW4140 0xBA201000 #define FPGA_OUT 0xBA200400 #define PORT_HIZA 0xA4050158 @@ -302,7 +381,8 @@ static int __init devices_setup(void) ctrl_outw(ctrl_inw(FPGA_OUT) & ~((1 << 1) | /* LAN */ (1 << 6) | /* VIDEO DAC */ - (1 << 12)), /* USB0 */ + (1 << 12) | /* USB0 */ + (1 << 14)), /* RMII */ FPGA_OUT); /* enable IRQ 0,1,2 */ @@ -404,6 +484,28 @@ static int __init devices_setup(void) gpio_request(GPIO_FN_KEYOUT1, NULL); gpio_request(GPIO_FN_KEYOUT0, NULL); + /* + * enable SH-Eth + * + * please remove J33 pin from your board !! + * + * ms7724 board should not use GPIO_FN_LNKSTA pin + * So, This time PTX5 is set to input pin + */ + gpio_request(GPIO_FN_RMII_RXD0, NULL); + gpio_request(GPIO_FN_RMII_RXD1, NULL); + gpio_request(GPIO_FN_RMII_TXD0, NULL); + gpio_request(GPIO_FN_RMII_TXD1, NULL); + gpio_request(GPIO_FN_RMII_REF_CLK, NULL); + gpio_request(GPIO_FN_RMII_TX_EN, NULL); + gpio_request(GPIO_FN_RMII_RX_ER, NULL); + gpio_request(GPIO_FN_RMII_CRS_DV, NULL); + gpio_request(GPIO_FN_MDIO, NULL); + gpio_request(GPIO_FN_MDC, NULL); + gpio_request(GPIO_PTX5, NULL); + gpio_direction_input(GPIO_PTX5); + sh_eth_init(); + if (sw & SW41_B) { /* SVGA */ lcdc_info.ch[0].lcd_cfg.xres = 800; @@ -437,7 +539,7 @@ static int __init devices_setup(void) } return platform_add_devices(ms7724se_devices, - ARRAY_SIZE(ms7724se_devices)); + ARRAY_SIZE(ms7724se_devices)); } device_initcall(devices_setup); -- cgit v1.2.3