From fa5da2f7bdcf885efe65a37df13907c7d72296f6 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 8 Mar 2007 17:27:37 +0900 Subject: sh: Bring kgdb back from the dead. This code has suffered quite a bit of bitrot, do some basic tidying to get it to a reasonably functional state again. This gets the basic support and the console working again. Signed-off-by: Paul Mundt --- arch/sh/boards/se/7751/setup.c | 148 ----------------------------------------- 1 file changed, 148 deletions(-) (limited to 'arch/sh/boards/se') diff --git a/arch/sh/boards/se/7751/setup.c b/arch/sh/boards/se/7751/setup.c index e3feae6ec0b..770defed9c4 100644 --- a/arch/sh/boards/se/7751/setup.c +++ b/arch/sh/boards/se/7751/setup.c @@ -14,153 +14,6 @@ #include #include -void init_7751se_IRQ(void); - -#ifdef CONFIG_SH_KGDB -#include -static int kgdb_uart_setup(void); -static struct kgdb_sermap kgdb_uart_sermap = -{ "ttyS", 0, kgdb_uart_setup, NULL }; -#endif - -/* - * Initialize the board - */ -static void __init sh7751se_setup(char **cmdline_p) -{ - /* Call init_smsc() replacement to set up SuperIO. */ - /* XXX: RTC setting comes here */ -#ifdef CONFIG_SH_KGDB - kgdb_register_sermap(&kgdb_uart_sermap); -#endif -} - -/********************************************************************* - * Currently a hack (e.g. does not interact well w/serial.c, lots of * - * hardcoded stuff) but may be useful if SCI/F needs debugging. * - * Mostly copied from x86 code (see files asm-i386/kgdb_local.h and * - * arch/i386/lib/kgdb_serial.c). * - *********************************************************************/ - -#ifdef CONFIG_SH_KGDB -#include -#include -#include -#include - -#define COM1_PORT 0x3f8 /* Base I/O address */ -#define COM1_IRQ 4 /* IRQ not used yet */ -#define COM2_PORT 0x2f8 /* Base I/O address */ -#define COM2_IRQ 3 /* IRQ not used yet */ - -#define SB_CLOCK 1843200 /* Serial baud clock */ -#define SB_BASE (SB_CLOCK/16) -#define SB_MCR UART_MCR_OUT2 | UART_MCR_DTR | UART_MCR_RTS - -struct uart_port { - int base; -}; -#define UART_NPORTS 2 -struct uart_port uart_ports[] = { - { COM1_PORT }, - { COM2_PORT }, -}; -struct uart_port *kgdb_uart_port; - -#define UART_IN(reg) inb_p(kgdb_uart_port->base + reg) -#define UART_OUT(reg,v) outb_p((v), kgdb_uart_port->base + reg) - -/* Basic read/write functions for the UART */ -#define UART_LSR_RXCERR (UART_LSR_BI | UART_LSR_FE | UART_LSR_PE) -static int kgdb_uart_getchar(void) -{ - int lsr; - int c = -1; - - while (c == -1) { - lsr = UART_IN(UART_LSR); - if (lsr & UART_LSR_DR) - c = UART_IN(UART_RX); - if ((lsr & UART_LSR_RXCERR)) - c = -1; - } - return c; -} - -static void kgdb_uart_putchar(int c) -{ - while ((UART_IN(UART_LSR) & UART_LSR_THRE) == 0) - ; - UART_OUT(UART_TX, c); -} - -/* - * Initialize UART to configured/requested values. - * (But we don't interrupts yet, or interact w/serial.c) - */ -static int kgdb_uart_setup(void) -{ - int port; - int lcr = 0; - int bdiv = 0; - - if (kgdb_portnum >= UART_NPORTS) { - KGDB_PRINTK("uart port %d invalid.\n", kgdb_portnum); - return -1; - } - - kgdb_uart_port = &uart_ports[kgdb_portnum]; - - /* Init sequence from gdb_hook_interrupt */ - UART_IN(UART_RX); - UART_OUT(UART_IER, 0); - - UART_IN(UART_RX); /* Serial driver comments say */ - UART_IN(UART_IIR); /* this clears interrupt regs */ - UART_IN(UART_MSR); - - /* Figure basic LCR values */ - switch (kgdb_bits) { - case '7': - lcr |= UART_LCR_WLEN7; - break; - default: case '8': - lcr |= UART_LCR_WLEN8; - break; - } - switch (kgdb_parity) { - case 'O': - lcr |= UART_LCR_PARITY; - break; - case 'E': - lcr |= (UART_LCR_PARITY | UART_LCR_EPAR); - break; - default: break; - } - - /* Figure the baud rate divisor */ - bdiv = (SB_BASE/kgdb_baud); - - /* Set the baud rate and LCR values */ - UART_OUT(UART_LCR, (lcr | UART_LCR_DLAB)); - UART_OUT(UART_DLL, (bdiv & 0xff)); - UART_OUT(UART_DLM, ((bdiv >> 8) & 0xff)); - UART_OUT(UART_LCR, lcr); - - /* Set the MCR */ - UART_OUT(UART_MCR, SB_MCR); - - /* Turn off FIFOs for now */ - UART_OUT(UART_FCR, 0); - - /* Setup complete: initialize function pointers */ - kgdb_getchar = kgdb_uart_getchar; - kgdb_putchar = kgdb_uart_putchar; - - return 0; -} -#endif /* CONFIG_SH_KGDB */ - static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 }; static struct resource heartbeat_resources[] = { @@ -197,7 +50,6 @@ __initcall(se7751_devices_setup); */ struct sh_machine_vector mv_7751se __initmv = { .mv_name = "7751 SolutionEngine", - .mv_setup = sh7751se_setup, .mv_nr_irqs = 72, .mv_inb = sh7751se_inb, -- cgit v1.2.3