From d619500aed2f9b841b2310bc94f8056ae9ca2a73 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Fri, 15 Jun 2007 10:41:54 +0900 Subject: sh: rework intc2 code The shared intc2 code currently contains cpu-specific #ifdefs. This is a tad unclean and it prevents us from using the shared code to drive board-specific irqs on the se7780 board. This patch reworks the intc2 code by moving the base addresses of the intc2 registers into struct intc2_desc. This new structure also contains the name of the controller in struct irq_chip. The idea behind putting struct irq_chip in there is that we can use offsetof() to locate the base addresses in the irq_chip callbacks. One logic change has been made - the original shared intc2 code enabled the interrupts by default but with this patch they are all disabled by default. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4/setup-sh7760.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) (limited to 'arch/sh/kernel/cpu/sh4') diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c index b7c702821e6..6d3c9189777 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c @@ -96,6 +96,19 @@ static struct intc2_data intc2_irq_table[] = { {109,12, 0, 4, 0, 3}, /* CMTI */ }; +static struct intc2_desc intc2_irq_desc __read_mostly = { + .prio_base = 0xfe080000, + .msk_base = 0xfe080040, + .mskclr_base = 0xfe080060, + + .intc2_data = intc2_irq_table, + .nr_irqs = ARRAY_SIZE(intc2_irq_table), + + .chip = { + .name = "INTC2-sh7760", + }, +}; + static struct ipr_data sh7760_ipr_map[] = { /* IRQ, IPR-idx, shift, priority */ { 16, 0, 12, 2 }, /* TMU0 TUNI*/ @@ -143,7 +156,7 @@ unsigned int map_ipridx_to_addr(int idx) void __init init_IRQ_intc2(void) { - make_intc2_irq(intc2_irq_table, ARRAY_SIZE(intc2_irq_table)); + register_intc2_controller(&intc2_irq_desc); } void __init init_IRQ_ipr(void) -- cgit v1.2.3