From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- arch/v850/kernel/rte_ma1_cb.c | 106 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 106 insertions(+) create mode 100644 arch/v850/kernel/rte_ma1_cb.c (limited to 'arch/v850/kernel/rte_ma1_cb.c') diff --git a/arch/v850/kernel/rte_ma1_cb.c b/arch/v850/kernel/rte_ma1_cb.c new file mode 100644 index 00000000000..3873e276392 --- /dev/null +++ b/arch/v850/kernel/rte_ma1_cb.c @@ -0,0 +1,106 @@ +/* + * arch/v850/kernel/rte_ma1_cb.c -- Midas labs RTE-V850E/MA1-CB board + * + * Copyright (C) 2001,02,03 NEC Electronics Corporation + * Copyright (C) 2001,02,03 Miles Bader + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader + */ + +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "mach.h" + + +/* SRAM and SDRAM are almost contiguous (with a small hole in between; + see mach_reserve_bootmem for details), so just use both as one big area. */ +#define RAM_START SRAM_ADDR +#define RAM_END (SDRAM_ADDR + SDRAM_SIZE) + + +void __init mach_early_init (void) +{ + rte_cb_early_init (); +} + +void __init mach_get_physical_ram (unsigned long *ram_start, + unsigned long *ram_len) +{ + *ram_start = RAM_START; + *ram_len = RAM_END - RAM_START; +} + +void __init mach_reserve_bootmem () +{ +#ifdef CONFIG_RTE_CB_MULTI + /* Prevent the kernel from touching the monitor's scratch RAM. */ + reserve_bootmem (MON_SCRATCH_ADDR, MON_SCRATCH_SIZE); +#endif + + /* The space between SRAM and SDRAM is filled with duplicate + images of SRAM. Prevent the kernel from using them. */ + reserve_bootmem (SRAM_ADDR + SRAM_SIZE, + SDRAM_ADDR - (SRAM_ADDR + SRAM_SIZE)); +} + +void mach_gettimeofday (struct timespec *tv) +{ + tv->tv_sec = 0; + tv->tv_nsec = 0; +} + +/* Called before configuring an on-chip UART. */ +void rte_ma1_cb_uart_pre_configure (unsigned chan, + unsigned cflags, unsigned baud) +{ + /* The RTE-MA1-CB connects some general-purpose I/O pins on the + CPU to the RTS/CTS lines of UART 0's serial connection. + I/O pins P42 and P43 are RTS and CTS respectively. */ + if (chan == 0) { + /* Put P42 & P43 in I/O port mode. */ + MA_PORT4_PMC &= ~0xC; + /* Make P42 an output, and P43 an input. */ + MA_PORT4_PM = (MA_PORT4_PM & ~0xC) | 0x8; + } + + /* Do pre-configuration for the actual UART. */ + ma_uart_pre_configure (chan, cflags, baud); +} + +void __init mach_init_irqs (void) +{ + unsigned tc; + + /* Initialize interrupts. */ + ma_init_irqs (); + rte_cb_init_irqs (); + + /* Use falling-edge-sensitivity for interrupts . */ + V850E_TIMER_C_SESC (0) &= ~0xC; + V850E_TIMER_C_SESC (1) &= ~0xF; + + /* INTP000-INTP011 are shared with `Timer C', so we have to set + up Timer C to pass them through as raw interrupts. */ + for (tc = 0; tc < 2; tc++) + /* Turn on the timer. */ + V850E_TIMER_C_TMCC0 (tc) |= V850E_TIMER_C_TMCC0_CAE; + + /* Make sure the relevant port0/port1 pins are assigned + interrupt duty. We used INTP001-INTP011 (don't screw with + INTP000 because the monitor uses it). */ + MA_PORT0_PMC |= 0x4; /* P02 (INTP001) in IRQ mode. */ + MA_PORT1_PMC |= 0x6; /* P11 (INTP010) & P12 (INTP011) in IRQ mode.*/ +} -- cgit v1.2.3