From ba8b453de08c18cbc2453bcabfd0936c1d6695cb Mon Sep 17 00:00:00 2001 From: Jesper Dangaard Brouer Date: Fri, 24 Oct 2008 15:05:12 +0200 Subject: Change UTF8 chars in Kconfig help text about Oprofile AMD barcelona Fixes screwing up text output when doing a make oldconfig and viewing help text of "OProfile AMD IBS support". When the terminal is not using an UTF8 locale / LANG. "make config" breaks terminal output and its not possible to continue. (Change added by changeset 852402cc Tue Jul 22 21:09:06 2008) Signed-off-by: Jesper Dangaard Brouer Signed-off-by: Robert Richter --- arch/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/Kconfig b/arch/Kconfig index e6ab550bceb..8977d99987c 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -21,7 +21,7 @@ config OPROFILE_IBS Instruction-Based Sampling (IBS) is a new profiling technique that provides rich, precise program performance information. IBS is introduced by AMD Family10h processors - (AMD Opteron Quad-Core processor “Barcelona”) to overcome + (AMD Opteron Quad-Core processor "Barcelona") to overcome the limitations of conventional performance counter sampling. -- cgit v1.2.3 From fa448d6008cc81a3537e5db168fa0490e0caba68 Mon Sep 17 00:00:00 2001 From: Carl Love Date: Fri, 24 Oct 2008 11:47:29 -0700 Subject: Cell OProfile: Incorrect local array size in activate spu profiling function The size of the pm_signal_local array should be equal to the number of SPUs being configured in the call. Currently, the array is of size 4 (NR_PHYS_CTRS) but being indexed by a for loop from 0 to 7 (NUM_SPUS_PER_NODE). Signed-off-by: Carl Love Signed-off-by: Robert Richter --- arch/powerpc/oprofile/op_model_cell.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c index 35141a8bc3d..6b2d974880b 100644 --- a/arch/powerpc/oprofile/op_model_cell.c +++ b/arch/powerpc/oprofile/op_model_cell.c @@ -830,7 +830,7 @@ static int calculate_lfsr(int n) static int pm_rtas_activate_spu_profiling(u32 node) { int ret, i; - struct pm_signal pm_signal_local[NR_PHYS_CTRS]; + struct pm_signal pm_signal_local[NUM_SPUS_PER_NODE]; /* * Set up the rtas call to configure the debug bus to -- cgit v1.2.3 From ae9b9403644f3ecc76867af042e7e1cfd5c099d0 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Thu, 30 Oct 2008 17:43:57 +0100 Subject: AMD IOMMU: fix detection of NP capable IOMMUs This patch changes the code to use IOMMU_CAP_NPCACHE as a shift and not as a mask. Signed-off-by: Joerg Roedel --- arch/x86/kernel/amd_iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index 3b346c6f551..38e88d40ab1 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -50,7 +50,7 @@ static int dma_ops_unity_map(struct dma_ops_domain *dma_dom, /* returns !0 if the IOMMU is caching non-present entries in its TLB */ static int iommu_has_npcache(struct amd_iommu *iommu) { - return iommu->cap & IOMMU_CAP_NPCACHE; + return iommu->cap & (1UL << IOMMU_CAP_NPCACHE); } /**************************************************************************** -- cgit v1.2.3 From 22cffe494b6b5773b44fe8bb8f41b471c1734b53 Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Fri, 31 Oct 2008 16:09:47 +0100 Subject: Revert "Cell OProfile: Incorrect local array size in activate spu profiling function" This reverts commit fa448d6008cc81a3537e5db168fa0490e0caba68. --- arch/powerpc/oprofile/op_model_cell.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c index 6b2d974880b..35141a8bc3d 100644 --- a/arch/powerpc/oprofile/op_model_cell.c +++ b/arch/powerpc/oprofile/op_model_cell.c @@ -830,7 +830,7 @@ static int calculate_lfsr(int n) static int pm_rtas_activate_spu_profiling(u32 node) { int ret, i; - struct pm_signal pm_signal_local[NUM_SPUS_PER_NODE]; + struct pm_signal pm_signal_local[NR_PHYS_CTRS]; /* * Set up the rtas call to configure the debug bus to -- cgit v1.2.3 From 99219b4f3e0772a11fc0d98213b00e89fee7b049 Mon Sep 17 00:00:00 2001 From: Carl Love Date: Wed, 29 Oct 2008 08:06:45 -0700 Subject: Cell OProfile: Incorrect local array size in activate spu profiling function Updated the patch to address comments by Michael Ellerman. Specifically, changed upper limit in for loop to ARRAY_SIZE() macro and added a check to make sure the number of events specified by the user, which is used as the max for indexing various arrays, is no bigger then the declared size of the arrays. The size of the pm_signal_local array should be equal to the number of SPUs being configured in the array. Currently, the array is of size 4 (NR_PHYS_CTRS) but being indexed by a for loop from 0 to 7 (NUM_SPUS_PER_NODE). Signed-off-by: Carl Love --- arch/powerpc/oprofile/op_model_cell.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c index 35141a8bc3d..25a4ec2514a 100644 --- a/arch/powerpc/oprofile/op_model_cell.c +++ b/arch/powerpc/oprofile/op_model_cell.c @@ -582,6 +582,13 @@ static int cell_reg_setup(struct op_counter_config *ctr, num_counters = num_ctrs; + if (unlikely(num_ctrs > NR_PHYS_CTRS)) { + printk(KERN_ERR + "%s: Oprofile, number of specified events " \ + "exceeds number of physical counters\n", + __func__); + return -EIO; + } pm_regs.group_control = 0; pm_regs.debug_bus_control = 0; @@ -830,13 +837,13 @@ static int calculate_lfsr(int n) static int pm_rtas_activate_spu_profiling(u32 node) { int ret, i; - struct pm_signal pm_signal_local[NR_PHYS_CTRS]; + struct pm_signal pm_signal_local[NUM_SPUS_PER_NODE]; /* * Set up the rtas call to configure the debug bus to * route the SPU PCs. Setup the pm_signal for each SPU */ - for (i = 0; i < NUM_SPUS_PER_NODE; i++) { + for (i = 0; i < ARRAY_SIZE(pm_signal_local); i++) { pm_signal_local[i].cpu = node; pm_signal_local[i].signal_group = 41; /* spu i on word (i/2) */ @@ -848,7 +855,7 @@ static int pm_rtas_activate_spu_profiling(u32 node) ret = rtas_ibm_cbe_perftools(SUBFUNC_ACTIVATE, PASSTHRU_ENABLE, pm_signal_local, - (NUM_SPUS_PER_NODE + (ARRAY_SIZE(pm_signal_local) * sizeof(struct pm_signal))); if (unlikely(ret)) { -- cgit v1.2.3 From 73557af5bf32c3db973050de1fb73423e8fc873e Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Fri, 31 Oct 2008 13:59:49 -0400 Subject: x86, voyager: fix smp_intr_init() compile breakage Impact: fix x86/Voyager build Looks like this became static on the rest of x86. Fix it up by adding an external definition to mach-voyager/setup.c Signed-off-by: Ingo Molnar --- arch/x86/include/asm/voyager.h | 1 + arch/x86/mach-voyager/setup.c | 2 +- arch/x86/mach-voyager/voyager_smp.c | 2 +- 3 files changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/voyager.h b/arch/x86/include/asm/voyager.h index 9c811d2e6f9..b3e64730762 100644 --- a/arch/x86/include/asm/voyager.h +++ b/arch/x86/include/asm/voyager.h @@ -520,6 +520,7 @@ extern void voyager_restart(void); extern void voyager_cat_power_off(void); extern void voyager_cat_do_common_interrupt(void); extern void voyager_handle_nmi(void); +extern void voyager_smp_intr_init(void); /* Commands for the following are */ #define VOYAGER_PSI_READ 0 #define VOYAGER_PSI_WRITE 1 diff --git a/arch/x86/mach-voyager/setup.c b/arch/x86/mach-voyager/setup.c index 6bbdd633864..a580b9562e7 100644 --- a/arch/x86/mach-voyager/setup.c +++ b/arch/x86/mach-voyager/setup.c @@ -27,7 +27,7 @@ static struct irqaction irq2 = { void __init intr_init_hook(void) { #ifdef CONFIG_SMP - smp_intr_init(); + voyager_smp_intr_init(); #endif setup_irq(2, &irq2); diff --git a/arch/x86/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c index 7f4c6af1435..0e331652681 100644 --- a/arch/x86/mach-voyager/voyager_smp.c +++ b/arch/x86/mach-voyager/voyager_smp.c @@ -1258,7 +1258,7 @@ static void handle_vic_irq(unsigned int irq, struct irq_desc *desc) #define QIC_SET_GATE(cpi, vector) \ set_intr_gate((cpi) + QIC_DEFAULT_CPI_BASE, (vector)) -void __init smp_intr_init(void) +void __init voyager_smp_intr_init(void) { int i; -- cgit v1.2.3 From 70de9a97049e0ba79dc040868564408d5ce697f9 Mon Sep 17 00:00:00 2001 From: Alok Kataria Date: Mon, 3 Nov 2008 11:18:47 -0800 Subject: x86: don't use tsc_khz to calculate lpj if notsc is passed Impact: fix udelay when "notsc" boot parameter is passed With notsc passed on commandline, tsc may not be used for udelays, make sure that we do not use tsc_khz to calculate the lpj value in such cases. Reported-by: Bartlomiej Zolnierkiewicz Signed-off-by: Alok N Kataria Cc: Signed-off-by: Ingo Molnar --- arch/x86/kernel/tsc.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index 62348e4fd8d..2ef80e30192 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -813,10 +813,6 @@ void __init tsc_init(void) cpu_khz = calibrate_cpu(); #endif - lpj = ((u64)tsc_khz * 1000); - do_div(lpj, HZ); - lpj_fine = lpj; - printk("Detected %lu.%03lu MHz processor.\n", (unsigned long)cpu_khz / 1000, (unsigned long)cpu_khz % 1000); @@ -836,6 +832,10 @@ void __init tsc_init(void) /* now allow native_sched_clock() to use rdtsc */ tsc_disabled = 0; + lpj = ((u64)tsc_khz * 1000); + do_div(lpj, HZ); + lpj_fine = lpj; + use_tsc_delay(); /* Check and install the TSC clocksource */ dmi_check_system(bad_tsc_dmi_table); -- cgit v1.2.3 From d2ed5cb80a241518dd71f467c884bfabbe15f68c Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 2 Nov 2008 09:16:50 +0000 Subject: [ARM] fix VFP+softfloat binaries 2.6.28-rc tightened up the ELF architecture checks on ARM. For non-EABI it only allows VFP if the hardware supports it. However, the kernel fails to also inspect the soft-float flag, so it incorrectly rejects binaries using soft-VFP. The fix is simple: also check that EF_ARM_SOFT_FLOAT isn't set before rejecting VFP binaries on non-VFP hardware. Acked-by: Mikael Pettersson Signed-off-by: Russell King --- arch/arm/kernel/elf.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/kernel/elf.c b/arch/arm/kernel/elf.c index 513f332f040..84849098c8e 100644 --- a/arch/arm/kernel/elf.c +++ b/arch/arm/kernel/elf.c @@ -21,12 +21,16 @@ int elf_check_arch(const struct elf32_hdr *x) eflags = x->e_flags; if ((eflags & EF_ARM_EABI_MASK) == EF_ARM_EABI_UNKNOWN) { + unsigned int flt_fmt; + /* APCS26 is only allowed if the CPU supports it */ if ((eflags & EF_ARM_APCS_26) && !(elf_hwcap & HWCAP_26BIT)) return 0; + flt_fmt = eflags & (EF_ARM_VFP_FLOAT | EF_ARM_SOFT_FLOAT); + /* VFP requires the supporting code */ - if ((eflags & EF_ARM_VFP_FLOAT) && !(elf_hwcap & HWCAP_VFP)) + if (flt_fmt == EF_ARM_VFP_FLOAT && !(elf_hwcap & HWCAP_VFP)) return 0; } return 1; -- cgit v1.2.3 From 9ac8d3fb22b593d39d161dcd716af0f1f7546837 Mon Sep 17 00:00:00 2001 From: Russ Anderson Date: Mon, 3 Nov 2008 16:58:51 -0600 Subject: [IA64] Simplify SGI uv vs. sn2 driver issues Add partition id, coherence id, and region size to UV to make life simpler for drivers shared between sn2 & uv. Signed-off-by: Russ Anderson Signed-off-by: Tony Luck --- arch/ia64/uv/kernel/setup.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/ia64/uv/kernel/setup.c b/arch/ia64/uv/kernel/setup.c index cf5f28ae96c..7a5ae633198 100644 --- a/arch/ia64/uv/kernel/setup.c +++ b/arch/ia64/uv/kernel/setup.c @@ -19,6 +19,12 @@ EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info); #ifdef CONFIG_IA64_SGI_UV int sn_prom_type; +long sn_partition_id; +EXPORT_SYMBOL(sn_partition_id); +long sn_coherency_id; +EXPORT_SYMBOL_GPL(sn_coherency_id); +long sn_region_size; +EXPORT_SYMBOL(sn_region_size); #endif struct redir_addr { -- cgit v1.2.3 From 7576f684494e927b901eee25a44ce52c82f9f60e Mon Sep 17 00:00:00 2001 From: Russ Anderson Date: Mon, 3 Nov 2008 13:29:41 -0800 Subject: [IA64] Add UV watchlist support. This is used by SGI xp drivers (drivers/misc/sgi-xp). Signed-off-by: Russ Anderson Signed-off-by: Tony Luck --- arch/ia64/include/asm/sn/sn_sal.h | 45 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) (limited to 'arch') diff --git a/arch/ia64/include/asm/sn/sn_sal.h b/arch/ia64/include/asm/sn/sn_sal.h index 57e649d388b..e310fc0135d 100644 --- a/arch/ia64/include/asm/sn/sn_sal.h +++ b/arch/ia64/include/asm/sn/sn_sal.h @@ -90,6 +90,8 @@ #define SN_SAL_SET_CPU_NUMBER 0x02000068 #define SN_SAL_KERNEL_LAUNCH_EVENT 0x02000069 +#define SN_SAL_WATCHLIST_ALLOC 0x02000070 +#define SN_SAL_WATCHLIST_FREE 0x02000071 /* * Service-specific constants @@ -1185,4 +1187,47 @@ ia64_sn_kernel_launch_event(void) SAL_CALL_NOLOCK(rv, SN_SAL_KERNEL_LAUNCH_EVENT, 0, 0, 0, 0, 0, 0, 0); return rv.status; } + +union sn_watchlist_u { + u64 val; + struct { + u64 blade : 16, + size : 32, + filler : 16; + }; +}; + +static inline int +sn_mq_watchlist_alloc(int blade, void *mq, unsigned int mq_size, + unsigned long *intr_mmr_offset) +{ + struct ia64_sal_retval rv; + unsigned long addr; + union sn_watchlist_u size_blade; + int watchlist; + + addr = (unsigned long)mq; + size_blade.size = mq_size; + size_blade.blade = blade; + + /* + * bios returns watchlist number or negative error number. + */ + ia64_sal_oemcall_nolock(&rv, SN_SAL_WATCHLIST_ALLOC, addr, + size_blade.val, (u64)intr_mmr_offset, + (u64)&watchlist, 0, 0, 0); + if (rv.status < 0) + return rv.status; + + return watchlist; +} + +static inline int +sn_mq_watchlist_free(int blade, int watchlist_num) +{ + struct ia64_sal_retval rv; + ia64_sal_oemcall_nolock(&rv, SN_SAL_WATCHLIST_FREE, blade, + watchlist_num, 0, 0, 0, 0, 0); + return rv.status; +} #endif /* _ASM_IA64_SN_SN_SAL_H */ -- cgit v1.2.3 From d6e15199d1784df90b7535e625f7617bd343d202 Mon Sep 17 00:00:00 2001 From: Russ Anderson Date: Mon, 3 Nov 2008 13:32:23 -0800 Subject: [IA64] Add error_recovery_info field to SAL section header Add the error_recovery_info field to the SAL section header, as defined in the SAL Spec. Signed-off-by: Russ Anderson Signed-off-by: Tony Luck --- arch/ia64/include/asm/sal.h | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/include/asm/sal.h b/arch/ia64/include/asm/sal.h index ea310c0812a..966797a97c9 100644 --- a/arch/ia64/include/asm/sal.h +++ b/arch/ia64/include/asm/sal.h @@ -337,11 +337,24 @@ typedef struct sal_log_record_header { #define sal_log_severity_fatal 1 #define sal_log_severity_corrected 2 +/* + * Error Recovery Info (ERI) bit decode. From SAL Spec section B.2.2 Table B-3 + * Error Section Error_Recovery_Info Field Definition. + */ +#define ERI_NOT_VALID 0x0 /* Error Recovery Field is not valid */ +#define ERI_NOT_ACCESSIBLE 0x30 /* Resource not accessible */ +#define ERI_CONTAINMENT_WARN 0x22 /* Corrupt data propagated */ +#define ERI_UNCORRECTED_ERROR 0x20 /* Uncorrected error */ +#define ERI_COMPONENT_RESET 0x24 /* Component must be reset */ +#define ERI_CORR_ERROR_LOG 0x21 /* Corrected error, needs logging */ +#define ERI_CORR_ERROR_THRESH 0x29 /* Corrected error threshold exceeded */ + /* Definition of log section header structures */ typedef struct sal_log_sec_header { efi_guid_t guid; /* Unique Section ID */ sal_log_revision_t revision; /* Major and Minor revision of Section */ - u16 reserved; + u8 error_recovery_info; /* Platform error recovery status */ + u8 reserved; u32 len; /* Section length */ } sal_log_section_hdr_t; -- cgit v1.2.3 From aca14f33104bb7b101df23cdd36c520b7c66bcfd Mon Sep 17 00:00:00 2001 From: Ken'ichi Ohmichi Date: Wed, 29 Oct 2008 14:17:57 -0700 Subject: [IA64] fix the difference between node_mem_map and node_start_pfn makedumpfile[1] cannot run on ia64 discontigmem kernel, because the member node_mem_map of struct pgdat_list has invalid value. This patch fixes it. node_start_pfn shows the start pfn of each node, and node_mem_map should point 'struct page' of each node's node_start_pfn. On my machine, node0's node_start_pfn shows 0x400 and its node_mem_map points 0xa0007fffbf000000. This address is the same as vmem_map, so the node_mem_map points 'struct page' of pfn 0, even if its node_start_pfn shows 0x400. The cause is due to the round down of min_pfn in count_node_pages() and node0's node_mem_map points 'struct page' of inactive pfn (0x0). This patch fixes it. makedumpfile[1]: dump filtering command https://sourceforge.net/projects/makedumpfile/ Signed-off-by: Ken'ichi Ohmichi Cc: Bernhard Walle Cc: Jay Lan Signed-off-by: Andrew Morton Signed-off-by: Tony Luck --- arch/ia64/include/asm/meminit.h | 1 - arch/ia64/mm/discontig.c | 1 - 2 files changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/ia64/include/asm/meminit.h b/arch/ia64/include/asm/meminit.h index 6bc96ee5432..c0cea375620 100644 --- a/arch/ia64/include/asm/meminit.h +++ b/arch/ia64/include/asm/meminit.h @@ -48,7 +48,6 @@ extern int reserve_elfcorehdr(unsigned long *start, unsigned long *end); */ #define GRANULEROUNDDOWN(n) ((n) & ~(IA64_GRANULE_SIZE-1)) #define GRANULEROUNDUP(n) (((n)+IA64_GRANULE_SIZE-1) & ~(IA64_GRANULE_SIZE-1)) -#define ORDERROUNDDOWN(n) ((n) & ~((PAGE_SIZE<>PAGE_SHIFT; #endif start = GRANULEROUNDDOWN(start); - start = ORDERROUNDDOWN(start); end = GRANULEROUNDUP(end); mem_data[node].max_pfn = max(mem_data[node].max_pfn, end >> PAGE_SHIFT); -- cgit v1.2.3 From 9979aa7778e664bb31efb4281a9e118a9909c35c Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Wed, 29 Oct 2008 14:17:59 -0700 Subject: [IA64] use common header for software IO/TLB Remove the swiotlb prototypes from the architecture code and use the common header file instead. Signed-off-by: Joerg Roedel Signed-off-by: Andrew Morton Signed-off-by: Tony Luck --- arch/ia64/hp/common/hwsw_iommu.c | 9 +-------- arch/ia64/include/asm/machvec.h | 22 +--------------------- 2 files changed, 2 insertions(+), 29 deletions(-) (limited to 'arch') diff --git a/arch/ia64/hp/common/hwsw_iommu.c b/arch/ia64/hp/common/hwsw_iommu.c index 88b6e6f3fd8..2769dbfd03b 100644 --- a/arch/ia64/hp/common/hwsw_iommu.c +++ b/arch/ia64/hp/common/hwsw_iommu.c @@ -13,19 +13,12 @@ */ #include +#include #include /* swiotlb declarations & definitions: */ extern int swiotlb_late_init_with_default_size (size_t size); -extern ia64_mv_dma_alloc_coherent swiotlb_alloc_coherent; -extern ia64_mv_dma_free_coherent swiotlb_free_coherent; -extern ia64_mv_dma_map_single_attrs swiotlb_map_single_attrs; -extern ia64_mv_dma_unmap_single_attrs swiotlb_unmap_single_attrs; -extern ia64_mv_dma_map_sg_attrs swiotlb_map_sg_attrs; -extern ia64_mv_dma_unmap_sg_attrs swiotlb_unmap_sg_attrs; -extern ia64_mv_dma_supported swiotlb_dma_supported; -extern ia64_mv_dma_mapping_error swiotlb_dma_mapping_error; /* hwiommu declarations & definitions: */ diff --git a/arch/ia64/include/asm/machvec.h b/arch/ia64/include/asm/machvec.h index 1ea28bcee33..59c17e44668 100644 --- a/arch/ia64/include/asm/machvec.h +++ b/arch/ia64/include/asm/machvec.h @@ -11,6 +11,7 @@ #define _ASM_IA64_MACHVEC_H #include +#include /* forward declarations: */ struct device; @@ -297,27 +298,6 @@ extern void machvec_init_from_cmdline(const char *cmdline); # error Unknown configuration. Update arch/ia64/include/asm/machvec.h. # endif /* CONFIG_IA64_GENERIC */ -/* - * Declare default routines which aren't declared anywhere else: - */ -extern ia64_mv_dma_init swiotlb_init; -extern ia64_mv_dma_alloc_coherent swiotlb_alloc_coherent; -extern ia64_mv_dma_free_coherent swiotlb_free_coherent; -extern ia64_mv_dma_map_single swiotlb_map_single; -extern ia64_mv_dma_map_single_attrs swiotlb_map_single_attrs; -extern ia64_mv_dma_unmap_single swiotlb_unmap_single; -extern ia64_mv_dma_unmap_single_attrs swiotlb_unmap_single_attrs; -extern ia64_mv_dma_map_sg swiotlb_map_sg; -extern ia64_mv_dma_map_sg_attrs swiotlb_map_sg_attrs; -extern ia64_mv_dma_unmap_sg swiotlb_unmap_sg; -extern ia64_mv_dma_unmap_sg_attrs swiotlb_unmap_sg_attrs; -extern ia64_mv_dma_sync_single_for_cpu swiotlb_sync_single_for_cpu; -extern ia64_mv_dma_sync_sg_for_cpu swiotlb_sync_sg_for_cpu; -extern ia64_mv_dma_sync_single_for_device swiotlb_sync_single_for_device; -extern ia64_mv_dma_sync_sg_for_device swiotlb_sync_sg_for_device; -extern ia64_mv_dma_mapping_error swiotlb_dma_mapping_error; -extern ia64_mv_dma_supported swiotlb_dma_supported; - /* * Define default versions so we can extend machvec for new platforms without having * to update the machvec files for all existing platforms. -- cgit v1.2.3 From 6a2d26fd3fd1129824ffe53778832f0794d99cc2 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Sun, 26 Oct 2008 23:09:19 +0800 Subject: [IA64] remove duplicated #include from pci-dma.c Removed duplicated #include and in arch/ia64/kernel/pci-dma.c. Signed-off-by: Huang Weiyi Signed-off-by: Tony Luck --- arch/ia64/kernel/pci-dma.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/pci-dma.c b/arch/ia64/kernel/pci-dma.c index 031abbf9c87..dbdb778efa0 100644 --- a/arch/ia64/kernel/pci-dma.c +++ b/arch/ia64/kernel/pci-dma.c @@ -12,13 +12,11 @@ #include #include -#include #include #ifdef CONFIG_DMAR #include -#include #include #include -- cgit v1.2.3 From d8d54b0252280f519ad4f9268d2612b0463b3f9e Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Fri, 24 Oct 2008 14:41:09 +0900 Subject: [IA64] remove dead BIO_VMERGE_BOUNDARY definition The block layer dropped the virtual merge feature (b8b3e16cfe6435d961f6aaebcfd52a1ff2a988c5). BIO_VMERGE_BOUNDARY definition is meaningless now (For IA64, BIO_VMERGE_BOUNDARY has been meaningless for a long time since IA64 disables the virtual merge feature). Signed-off-by: FUJITA Tomonori Signed-off-by: Tony Luck --- arch/ia64/include/asm/io.h | 24 ------------------------ 1 file changed, 24 deletions(-) (limited to 'arch') diff --git a/arch/ia64/include/asm/io.h b/arch/ia64/include/asm/io.h index 7f257507cd8..0d9d16e2d94 100644 --- a/arch/ia64/include/asm/io.h +++ b/arch/ia64/include/asm/io.h @@ -434,28 +434,4 @@ extern void memset_io(volatile void __iomem *s, int c, long n); # endif /* __KERNEL__ */ -/* - * Enabling BIO_VMERGE_BOUNDARY forces us to turn off I/O MMU bypassing. It is said that - * BIO-level virtual merging can give up to 4% performance boost (not verified for ia64). - * On the other hand, we know that I/O MMU bypassing gives ~8% performance improvement on - * SPECweb-like workloads on zx1-based machines. Thus, for now we favor I/O MMU bypassing - * over BIO-level virtual merging. - */ -extern unsigned long ia64_max_iommu_merge_mask; -#if 1 -#define BIO_VMERGE_BOUNDARY 0 -#else -/* - * It makes no sense at all to have this BIO_VMERGE_BOUNDARY macro here. Should be - * replaced by dma_merge_mask() or something of that sort. Note: the only way - * BIO_VMERGE_BOUNDARY is used is to mask off bits. Effectively, our definition gets - * expanded into: - * - * addr & ((ia64_max_iommu_merge_mask + 1) - 1) == (addr & ia64_max_iommu_vmerge_mask) - * - * which is precisely what we want. - */ -#define BIO_VMERGE_BOUNDARY (ia64_max_iommu_merge_mask + 1) -#endif - #endif /* _ASM_IA64_IO_H */ -- cgit v1.2.3 From f2b3fdc8873629d154a1ef052141ebaf3e5a231d Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Mon, 3 Nov 2008 13:54:52 -0800 Subject: [IA64] Build VT-D iommu support into generic kernel Now that all the ia64 mmu pieces are in the tree we can build support into the generic kernel. Signed-off-by: Tony Luck --- arch/ia64/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 27eec71429b..9f481ba59a4 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -148,6 +148,7 @@ config IA64_GENERIC select ACPI_NUMA select SWIOTLB select PCI_MSI + select DMAR help This selects the system type of your hardware. A "generic" kernel will run on any supported IA-64 system. However, if you configure -- cgit v1.2.3 From 85d7a070264272ceffec0c7ce0e9af1e37c62b6e Mon Sep 17 00:00:00 2001 From: Sanjeev Premi Date: Tue, 4 Nov 2008 13:35:06 -0800 Subject: ARM: OMAP: Fix compiler warnings in gpmc.c Fix these compiler warnings: gpmc.c: In function 'gpmc_init': gpmc.c:432: warning: 'return' with a value, in function returning void gpmc.c:439: warning: 'return' with a value, in function returning void Signed-off-by: Sanjeev Premi Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/gpmc.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 763bdbeaf68..2249049c1d5 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -429,18 +429,16 @@ void __init gpmc_init(void) gpmc_l3_clk = clk_get(NULL, ck); if (IS_ERR(gpmc_l3_clk)) { printk(KERN_ERR "Could not get GPMC clock %s\n", ck); - return -ENODEV; + BUG(); } gpmc_base = ioremap(l, SZ_4K); if (!gpmc_base) { clk_put(gpmc_l3_clk); printk(KERN_ERR "Could not get GPMC register memory\n"); - return -ENOMEM; + BUG(); } - BUG_ON(IS_ERR(gpmc_l3_clk)); - l = gpmc_read_reg(GPMC_REVISION); printk(KERN_INFO "GPMC revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f); /* Set smart idle mode and automatic L3 clock gating */ -- cgit v1.2.3 From e621f266d4cd18a07a833877c3995d2ccb35b951 Mon Sep 17 00:00:00 2001 From: Zhaolei Date: Tue, 4 Nov 2008 13:35:07 -0800 Subject: ARM: OMAP: Fix debugfs_create_*'s error checking method for arm/plat-omap debugfs_create_*() returns NULL if an error occurs, returns -ENODEV when debugfs is not enabled in the kernel. Comparing to PATCH v1, because clk_debugfs_init is included in "#if defined CONFIG_DEBUG_FS", we only need to check NULL return. Thanks Li Zefan debugfs_create_u8() and other function's return value's checking method are also fixed in this patch. Signed-off-by: Zhao Lei Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/clock.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index bf6a10c5fc4..be6aab9c683 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -428,23 +428,23 @@ static int clk_debugfs_register_one(struct clk *c) if (c->id != 0) sprintf(p, ":%d", c->id); d = debugfs_create_dir(s, pa ? pa->dent : clk_debugfs_root); - if (IS_ERR(d)) - return PTR_ERR(d); + if (!d) + return -ENOMEM; c->dent = d; d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount); - if (IS_ERR(d)) { - err = PTR_ERR(d); + if (!d) { + err = -ENOMEM; goto err_out; } d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate); - if (IS_ERR(d)) { - err = PTR_ERR(d); + if (!d) { + err = -ENOMEM; goto err_out; } d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags); - if (IS_ERR(d)) { - err = PTR_ERR(d); + if (!d) { + err = -ENOMEM; goto err_out; } return 0; @@ -483,8 +483,8 @@ static int __init clk_debugfs_init(void) int err; d = debugfs_create_dir("clock", NULL); - if (IS_ERR(d)) - return PTR_ERR(d); + if (!d) + return -ENOMEM; clk_debugfs_root = d; list_for_each_entry(c, &clocks, node) { -- cgit v1.2.3 From 52414739ca3df12f6d1e78d4dc670e97af0e845f Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 4 Nov 2008 13:35:07 -0800 Subject: ARM: OMAP: Fix get_irqnr_and_base to clear spurious interrupt bits On omap24xx, INTCPS_SIR_IRQ_OFFSET bits [6:0] contains the current active interrupt number. However, on 34xx INTCPS_SIR_IRQ_OFFSET bits [31:7] also contains the SPURIOUSIRQFLAG, which gets set if the interrupt sorting information is invalid. If the SPURIOUSIRQFLAG bits are not ignored, the interrupt code will occasionally produce a bunch of confusing errors: irq -33, desc: c02ddcc8, depth: 0, count: 0, unhandled: 0 ->handle_irq(): c006f23c, handle_bad_irq+0x0/0x22c ->chip(): 00000000, 0x0 ->action(): 00000000 Fix this by masking out only the ACTIVEIRQ bits. Also fix a confusing comment. Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/mach/entry-macro.S | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S index 030118ee204..2276f89671d 100644 --- a/arch/arm/plat-omap/include/mach/entry-macro.S +++ b/arch/arm/plat-omap/include/mach/entry-macro.S @@ -65,7 +65,8 @@ #include #endif -#define INTCPS_SIR_IRQ_OFFSET 0x0040 /* Active interrupt number */ +#define INTCPS_SIR_IRQ_OFFSET 0x0040 /* Active interrupt offset */ +#define ACTIVEIRQ_MASK 0x7f /* Active interrupt bits */ .macro disable_fiq .endm @@ -88,6 +89,7 @@ cmp \irqnr, #0x0 2222: ldrne \irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET] + and \irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */ .endm -- cgit v1.2.3 From 5c32f62b97d62bec097c09e54e6602d0fce2af07 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 4 Nov 2008 13:35:08 -0800 Subject: ARM: OMAP: Fix define for twl4030 irqs Otherwise twl4030 gpios won't work. Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/mach/irqs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h index a2929ac8c68..bed5274c910 100644 --- a/arch/arm/plat-omap/include/mach/irqs.h +++ b/arch/arm/plat-omap/include/mach/irqs.h @@ -372,7 +372,7 @@ /* External TWL4030 gpio interrupts are optional */ #define TWL4030_GPIO_IRQ_BASE TWL4030_PWR_IRQ_END -#ifdef CONFIG_TWL4030_GPIO +#ifdef CONFIG_GPIO_TWL4030 #define TWL4030_GPIO_NR_IRQS 18 #else #define TWL4030_GPIO_NR_IRQS 0 -- cgit v1.2.3 From 9c8b4aff18b59cd0c2d9a77b3df1f9d7077df90c Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Sun, 2 Nov 2008 10:21:57 +0000 Subject: powerpc/cell: Fix compile error in ras.c This fixes this error on Cell when CONFIG_KEXEC = n: arch/powerpc/platforms/cell/ras.c:299: error: implicit declaration of function 'crash_shutdown_register' We have to include because it contains the dummy definition of crash_shutdown_register that is used when CONFIG_KEXEC=n, but doesn't include in that case. Signed-off-by: Alexey Dobriyan Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/ras.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c index fdf088f2430..7b4cefa2199 100644 --- a/arch/powerpc/platforms/cell/ras.c +++ b/arch/powerpc/platforms/cell/ras.c @@ -16,6 +16,7 @@ #include #include +#include #include #include #include -- cgit v1.2.3 From 454666eb78d890f5740ea1901f8b01a43c77c67c Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Sun, 2 Nov 2008 21:18:24 +0000 Subject: powerpc: Fix "unused variable" warning in pci_dlpar.c This gets rid of this build warning: arch/powerpc/platforms/pseries/pci_dlpar.c: In function 'init_phb_dynamic': arch/powerpc/platforms/pseries/pci_dlpar.c:192: warning: unused variable 'b' This is one of the very few warnings left in a ppc64_defconfig build and getting rid of it will make it easier to see future introduced ones (in fact this was introduced very recently). Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/pci_dlpar.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c index 31481dc485d..7190493e9bd 100644 --- a/arch/powerpc/platforms/pseries/pci_dlpar.c +++ b/arch/powerpc/platforms/pseries/pci_dlpar.c @@ -189,7 +189,6 @@ struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn) { struct pci_controller *phb; int primary; - struct pci_bus *b; primary = list_empty(&hose_list); phb = pcibios_alloc_controller(dn); -- cgit v1.2.3 From 9fcd18c9e63e325dbd2b4c726623f760788d5aa8 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 5 Nov 2008 16:52:08 +0100 Subject: sched: re-tune balancing Impact: improve wakeup affinity on NUMA systems, tweak SMP systems Given the fixes+tweaks to the wakeup-buddy code, re-tweak the domain balancing defaults on NUMA and SMP systems. Turn on SD_WAKE_AFFINE which was off on x86 NUMA - there's no reason why we would not want to have wakeup affinity across nodes as well. (we already do this in the standard NUMA template.) lat_ctx on a NUMA box is particularly happy about this change: before: | phoenix:~/l> ./lat_ctx -s 0 2 | "size=0k ovr=2.60 | 2 5.70 after: | phoenix:~/l> ./lat_ctx -s 0 2 | "size=0k ovr=2.65 | 2 2.07 a 2.75x speedup. pipe-test is similarly happy about it too: | phoenix:~/sched-tests> ./pipe-test | 18.26 usecs/loop. | 14.70 usecs/loop. | 14.38 usecs/loop. | 10.55 usecs/loop. # +WAKE_AFFINE on domain0+domain1 | 8.63 usecs/loop. | 8.59 usecs/loop. | 9.03 usecs/loop. | 8.94 usecs/loop. | 8.96 usecs/loop. | 8.63 usecs/loop. Also: - disable SD_BALANCE_NEWIDLE on NUMA and SMP domains (keep it for siblings) - enable SD_WAKE_BALANCE on SMP domains Sysbench+postgresql improves all around the board, quite significantly: .28-rc3-11474e2c .28-rc3-11474e2c-tune ------------------------------------------------- 1: 571 688 +17.08% 2: 1236 1206 -2.55% 4: 2381 2642 +9.89% 8: 4958 5164 +3.99% 16: 9580 9574 -0.07% 32: 7128 8118 +12.20% 64: 7342 8266 +11.18% 128: 7342 8064 +8.95% 256: 7519 7884 +4.62% 512: 7350 7731 +4.93% ------------------------------------------------- SUM: 55412 59341 +6.62% So it's a win both for the runup portion, the peak area and the tail. Signed-off-by: Ingo Molnar --- arch/x86/include/asm/topology.h | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h index 90ac7718469..4850e4b02b6 100644 --- a/arch/x86/include/asm/topology.h +++ b/arch/x86/include/asm/topology.h @@ -154,7 +154,7 @@ extern unsigned long node_remap_size[]; #endif -/* sched_domains SD_NODE_INIT for NUMAQ machines */ +/* sched_domains SD_NODE_INIT for NUMA machines */ #define SD_NODE_INIT (struct sched_domain) { \ .min_interval = 8, \ .max_interval = 32, \ @@ -169,8 +169,9 @@ extern unsigned long node_remap_size[]; .flags = SD_LOAD_BALANCE \ | SD_BALANCE_EXEC \ | SD_BALANCE_FORK \ - | SD_SERIALIZE \ - | SD_WAKE_BALANCE, \ + | SD_WAKE_AFFINE \ + | SD_WAKE_BALANCE \ + | SD_SERIALIZE, \ .last_balance = jiffies, \ .balance_interval = 1, \ } -- cgit v1.2.3 From c78d0cf2925bffae8a6f00e7d9b8e971b0392edd Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 5 Nov 2008 12:04:46 +0000 Subject: x86: don't allow nr_irqs > NR_IRQS Impact: fix boot hang on 32-bit systems with more than 224 IO-APIC pins On some 32-bit systems with a lot of IO-APICs probe_nr_irqs() can return a value larger than NR_IRQS. This will lead to probe_irq_on() overrunning the irq_desc array. I hit this when running net-next-2.6 (close to 2.6.28-rc3) on a Supermicro dual Xeon system. NR_IRQS is 224 but probe_nr_irqs() detects 5 IOAPICs and returns 240. Here are the log messages: Tue Nov 4 16:53:47 2008 ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) Tue Nov 4 16:53:47 2008 IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 Tue Nov 4 16:53:47 2008 ACPI: IOAPIC (id[0x02] address[0xfec81000] gsi_base[24]) Tue Nov 4 16:53:47 2008 IOAPIC[1]: apic_id 2, version 32, address 0xfec81000, GSI 24-47 Tue Nov 4 16:53:47 2008 ACPI: IOAPIC (id[0x03] address[0xfec81400] gsi_base[48]) Tue Nov 4 16:53:47 2008 IOAPIC[2]: apic_id 3, version 32, address 0xfec81400, GSI 48-71 Tue Nov 4 16:53:47 2008 ACPI: IOAPIC (id[0x04] address[0xfec82000] gsi_base[72]) Tue Nov 4 16:53:47 2008 IOAPIC[3]: apic_id 4, version 32, address 0xfec82000, GSI 72-95 Tue Nov 4 16:53:47 2008 ACPI: IOAPIC (id[0x05] address[0xfec82400] gsi_base[96]) Tue Nov 4 16:53:47 2008 IOAPIC[4]: apic_id 5, version 32, address 0xfec82400, GSI 96-119 Tue Nov 4 16:53:47 2008 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) Tue Nov 4 16:53:47 2008 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Tue Nov 4 16:53:47 2008 Enabling APIC mode: Flat. Using 5 I/O APICs Signed-off-by: Ben Hutchings Acked-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/io_apic.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c index b764d7429c6..7a3f2028e2e 100644 --- a/arch/x86/kernel/io_apic.c +++ b/arch/x86/kernel/io_apic.c @@ -3611,6 +3611,8 @@ int __init probe_nr_irqs(void) /* something wrong ? */ if (nr < nr_min) nr = nr_min; + if (WARN_ON(nr > NR_IRQS)) + nr = NR_IRQS; return nr; } -- cgit v1.2.3 From 1b4897688011cd05e07f00dcfe6af3331eb36a3c Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 4 Nov 2008 14:10:13 -0800 Subject: x86: size NR_IRQS on 32-bit systems the same way as 64-bit Impact: make NR_IRQS big enough for system with lots of apic/pins If lots of IO_APIC's are there (or can be there), size the same way as 64-bit, depending on MAX_IO_APICS and NR_CPUS. This fixes the boot problem reported by Ben Hutchings on a 32-bit server with 5 IO-APICs and 240 IO-APIC pins. Signed-off-by: Yinghai Tested-by: Ben Hutchings Signed-off-by: Ingo Molnar --- arch/x86/include/asm/irq_vectors.h | 20 ++++++-------------- 1 file changed, 6 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h index d843ed0e9b2..503aadc4ad3 100644 --- a/arch/x86/include/asm/irq_vectors.h +++ b/arch/x86/include/asm/irq_vectors.h @@ -101,30 +101,22 @@ #define LAST_VM86_IRQ 15 #define invalid_vm86_irq(irq) ((irq) < 3 || (irq) > 15) -#ifdef CONFIG_X86_64 +#if defined(CONFIG_X86_IO_APIC) && !defined(CONFIG_PARAVIRT) && !defined(CONFIG_X86_VISWS) && !defined(CONFIG_X86_VOYAGER) # if NR_CPUS < MAX_IO_APICS # define NR_IRQS (NR_VECTORS + (32 * NR_CPUS)) # else # define NR_IRQS (NR_VECTORS + (32 * MAX_IO_APICS)) # endif -#elif !defined(CONFIG_X86_VOYAGER) +#elif defined(CONFIG_PARAVIRT) || defined(CONFIG_X86_VISWS) || defined(CONFIG_X86_VOYAGER) -# if defined(CONFIG_X86_IO_APIC) || defined(CONFIG_PARAVIRT) || defined(CONFIG_X86_VISWS) - -# define NR_IRQS 224 - -# else /* IO_APIC || PARAVIRT */ - -# define NR_IRQS 16 - -# endif +# define NR_IRQS 224 -#else /* !VISWS && !VOYAGER */ +#else /* IO_APIC || PARAVIRT */ -# define NR_IRQS 224 +# define NR_IRQS 16 -#endif /* VISWS */ +#endif /* Voyager specific defines */ /* These define the CPIs we use in linux */ -- cgit v1.2.3 From da85f865b1dcec0853c48b763ed312441ce0c7df Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 5 Nov 2008 13:37:27 -0600 Subject: x86: mention ACPI in top-level Kconfig menu Impact: clarify menuconfig text Mention ACPI in the top-level menu to give a clue as to where it lives. This matches what ia64 does. Signed-off-by: Bjorn Helgaas Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 6f20718d315..5d6aa4013dc 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1494,7 +1494,7 @@ config HAVE_ARCH_EARLY_PFN_TO_NID def_bool X86_64 depends on NUMA -menu "Power management options" +menu "Power management and ACPI options" depends on !X86_VOYAGER config ARCH_HIBERNATION_HEADER -- cgit v1.2.3 From 7db282fa67b58daff8a57f9e1c93d4474b5908ff Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 5 Nov 2008 23:36:48 -0800 Subject: x86: remove VISWS and PARAVIRT around NR_IRQS puzzle Impact: fix warning message when PARAVIRT is set in config Remove stale #ifdef components from our IRQ sizing logic. x86/Voyager is the only holdout. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/include/asm/irq_vectors.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h index 503aadc4ad3..0005adb0f94 100644 --- a/arch/x86/include/asm/irq_vectors.h +++ b/arch/x86/include/asm/irq_vectors.h @@ -101,18 +101,18 @@ #define LAST_VM86_IRQ 15 #define invalid_vm86_irq(irq) ((irq) < 3 || (irq) > 15) -#if defined(CONFIG_X86_IO_APIC) && !defined(CONFIG_PARAVIRT) && !defined(CONFIG_X86_VISWS) && !defined(CONFIG_X86_VOYAGER) +#if defined(CONFIG_X86_IO_APIC) && !defined(CONFIG_X86_VOYAGER) # if NR_CPUS < MAX_IO_APICS # define NR_IRQS (NR_VECTORS + (32 * NR_CPUS)) # else # define NR_IRQS (NR_VECTORS + (32 * MAX_IO_APICS)) # endif -#elif defined(CONFIG_PARAVIRT) || defined(CONFIG_X86_VISWS) || defined(CONFIG_X86_VOYAGER) +#elif defined(CONFIG_X86_VOYAGER) # define NR_IRQS 224 -#else /* IO_APIC || PARAVIRT */ +#else /* IO_APIC || VOYAGER */ # define NR_IRQS 16 -- cgit v1.2.3 From d6f0f39b7d05e62b347c4352d070e4afb3ade4b5 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Tue, 4 Nov 2008 13:53:04 -0800 Subject: x86: add smp_mb() before sending INVALIDATE_TLB_VECTOR Impact: fix rare x2apic hang On x86, x2apic mode accesses for sending IPI's don't have serializing semantics. If the IPI receivner refers(in lock-free fashion) to some memory setup by the sender, the need for smp_mb() before sending the IPI becomes critical in x2apic mode. Add the smp_mb() in native_flush_tlb_others() before sending the IPI. Signed-off-by: Suresh Siddha Signed-off-by: Ingo Molnar --- arch/x86/kernel/tlb_32.c | 6 ++++++ arch/x86/kernel/tlb_64.c | 5 +++++ 2 files changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/tlb_32.c b/arch/x86/kernel/tlb_32.c index e00534b3353..f4049f3513b 100644 --- a/arch/x86/kernel/tlb_32.c +++ b/arch/x86/kernel/tlb_32.c @@ -154,6 +154,12 @@ void native_flush_tlb_others(const cpumask_t *cpumaskp, struct mm_struct *mm, flush_mm = mm; flush_va = va; cpus_or(flush_cpumask, cpumask, flush_cpumask); + + /* + * Make the above memory operations globally visible before + * sending the IPI. + */ + smp_mb(); /* * We have to send the IPI only to * CPUs affected. diff --git a/arch/x86/kernel/tlb_64.c b/arch/x86/kernel/tlb_64.c index dcbf7a1159e..8f919ca6949 100644 --- a/arch/x86/kernel/tlb_64.c +++ b/arch/x86/kernel/tlb_64.c @@ -182,6 +182,11 @@ void native_flush_tlb_others(const cpumask_t *cpumaskp, struct mm_struct *mm, f->flush_va = va; cpus_or(f->flush_cpumask, cpumask, f->flush_cpumask); + /* + * Make the above memory operations globally visible before + * sending the IPI. + */ + smp_mb(); /* * We have to send the IPI only to * CPUs affected. -- cgit v1.2.3 From 80be308dfa3798c7bad0fc81760b2faf83870e91 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Thu, 6 Nov 2008 14:59:05 +0100 Subject: AMD IOMMU: fix lazy IO/TLB flushing in unmap path Lazy flushing needs to take care of the unmap path too which is not yet implemented and leads to stale IO/TLB entries. This is fixed by this patch. Signed-off-by: Joerg Roedel --- arch/x86/kernel/amd_iommu.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index 38e88d40ab1..4755bbc7ae5 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -526,6 +526,9 @@ static void dma_ops_free_addresses(struct dma_ops_domain *dom, { address >>= PAGE_SHIFT; iommu_area_free(dom->bitmap, address, pages); + + if (address + pages >= dom->next_bit) + dom->need_flush = true; } /**************************************************************************** @@ -981,8 +984,10 @@ static void __unmap_single(struct amd_iommu *iommu, dma_ops_free_addresses(dma_dom, dma_addr, pages); - if (amd_iommu_unmap_flush) + if (amd_iommu_unmap_flush || dma_dom->need_flush) { iommu_flush_pages(iommu, dma_dom->domain.id, dma_addr, size); + dma_dom->need_flush = false; + } } /* -- cgit v1.2.3 From b9c3bfc24e1088d260de4091b2b41808c7398355 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Thu, 6 Nov 2008 12:05:40 +0000 Subject: x86: align DirectMap in /proc/meminfo Impact: right-align /proc/meminfo consistent with other fields When the split-LRU patches added Inactive(anon) and Inactive(file) lines to /proc/meminfo, all counts were moved two columns rightwards to fit in. Now move x86's DirectMap lines two columns rightwards to line up. Signed-off-by: Hugh Dickins Signed-off-by: Ingo Molnar --- arch/x86/mm/pageattr.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index f1dc1b75d16..e89d24815f2 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -67,18 +67,18 @@ static void split_page_count(int level) void arch_report_meminfo(struct seq_file *m) { - seq_printf(m, "DirectMap4k: %8lu kB\n", + seq_printf(m, "DirectMap4k: %8lu kB\n", direct_pages_count[PG_LEVEL_4K] << 2); #if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE) - seq_printf(m, "DirectMap2M: %8lu kB\n", + seq_printf(m, "DirectMap2M: %8lu kB\n", direct_pages_count[PG_LEVEL_2M] << 11); #else - seq_printf(m, "DirectMap4M: %8lu kB\n", + seq_printf(m, "DirectMap4M: %8lu kB\n", direct_pages_count[PG_LEVEL_2M] << 12); #endif #ifdef CONFIG_X86_64 if (direct_gbpages) - seq_printf(m, "DirectMap1G: %8lu kB\n", + seq_printf(m, "DirectMap1G: %8lu kB\n", direct_pages_count[PG_LEVEL_1G] << 20); #endif } -- cgit v1.2.3 From 8d00450d296dedec9ada38d43b83e79cca6fd5a3 Mon Sep 17 00:00:00 2001 From: Eduardo Habkost Date: Tue, 4 Nov 2008 12:52:44 -0200 Subject: Revert "x86: default to reboot via ACPI" This reverts commit c7ffa6c26277b403920e2255d10df849bd613380. the assumptio of this change was that this would not break any existing machine. Andrey Borzenkov reported troubles with the ACPI reboot method: the system would hang on reboot, necessiating a power cycle. Probably more systems are affected as well. Also, there are patches queued up for v2.6.29 to disable virtualization on emergency_restart() - which was the original motivation of this change. Reported-by: Andrey Borzenkov Bisected-by: Andrey Borzenkov Signed-off-by: Eduardo Habkost Acked-by: Avi Kivity Signed-off-by: Ingo Molnar --- arch/x86/kernel/reboot.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index f4c93f1cfc1..724adfc63cb 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -29,11 +29,7 @@ EXPORT_SYMBOL(pm_power_off); static const struct desc_ptr no_idt = {}; static int reboot_mode; -/* - * Keyboard reset and triple fault may result in INIT, not RESET, which - * doesn't work when we're in vmx root mode. Try ACPI first. - */ -enum reboot_type reboot_type = BOOT_ACPI; +enum reboot_type reboot_type = BOOT_KBD; int reboot_force; #if defined(CONFIG_X86_32) && defined(CONFIG_SMP) -- cgit v1.2.3 From ab4f2ee130d5ffcf35616e1f5c6ab75af5b463b6 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 6 Nov 2008 17:11:07 +0000 Subject: [ARM] fix naming of MODULE_START / MODULE_END As of 73bdf0a60e607f4b8ecc5aec597105976565a84f, the kernel needs to know where modules are located in the virtual address space. On ARM, we located this region between MODULE_START and MODULE_END. Unfortunately, everyone else calls it MODULES_VADDR and MODULES_END. Update ARM to use the same naming, so is_vmalloc_or_module_addr() can work properly. Also update the comment on mm/vmalloc.c to reflect that ARM also places modules in a separate region from the vmalloc space. Signed-off-by: Russell King --- arch/arm/include/asm/memory.h | 12 ++++++------ arch/arm/kernel/module.c | 8 ++++---- arch/arm/mm/mmu.c | 4 ++-- 3 files changed, 12 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index 809ff9ab853..77764301844 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -44,10 +44,10 @@ * The module space lives between the addresses given by TASK_SIZE * and PAGE_OFFSET - it must be within 32MB of the kernel text. */ -#define MODULE_END (PAGE_OFFSET) -#define MODULE_START (MODULE_END - 16*1048576) +#define MODULES_END (PAGE_OFFSET) +#define MODULES_VADDR (MODULES_END - 16*1048576) -#if TASK_SIZE > MODULE_START +#if TASK_SIZE > MODULES_VADDR #error Top of user space clashes with start of module space #endif @@ -56,7 +56,7 @@ * Since we use sections to map it, this macro replaces the physical address * with its virtual address while keeping offset from the base section. */ -#define XIP_VIRT_ADDR(physaddr) (MODULE_START + ((physaddr) & 0x000fffff)) +#define XIP_VIRT_ADDR(physaddr) (MODULES_VADDR + ((physaddr) & 0x000fffff)) /* * Allow 16MB-aligned ioremap pages @@ -94,8 +94,8 @@ /* * The module can be at any place in ram in nommu mode. */ -#define MODULE_END (END_MEM) -#define MODULE_START (PHYS_OFFSET) +#define MODULES_END (END_MEM) +#define MODULES_VADDR (PHYS_OFFSET) #endif /* !CONFIG_MMU */ diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index 9203ba7d58e..b8d965dcd6f 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -26,12 +26,12 @@ /* * The XIP kernel text is mapped in the module area for modules and * some other stuff to work without any indirect relocations. - * MODULE_START is redefined here and not in asm/memory.h to avoid + * MODULES_VADDR is redefined here and not in asm/memory.h to avoid * recompiling the whole kernel when CONFIG_XIP_KERNEL is turned on/off. */ extern void _etext; -#undef MODULE_START -#define MODULE_START (((unsigned long)&_etext + ~PGDIR_MASK) & PGDIR_MASK) +#undef MODULES_VADDR +#define MODULES_VADDR (((unsigned long)&_etext + ~PGDIR_MASK) & PGDIR_MASK) #endif #ifdef CONFIG_MMU @@ -43,7 +43,7 @@ void *module_alloc(unsigned long size) if (!size) return NULL; - area = __get_vm_area(size, VM_ALLOC, MODULE_START, MODULE_END); + area = __get_vm_area(size, VM_ALLOC, MODULES_VADDR, MODULES_END); if (!area) return NULL; diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 8ba75406455..34e53596ff1 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -654,7 +654,7 @@ static inline void prepare_page_table(struct meminfo *mi) /* * Clear out all the mappings below the kernel image. */ - for (addr = 0; addr < MODULE_START; addr += PGDIR_SIZE) + for (addr = 0; addr < MODULES_VADDR; addr += PGDIR_SIZE) pmd_clear(pmd_off_k(addr)); #ifdef CONFIG_XIP_KERNEL @@ -766,7 +766,7 @@ static void __init devicemaps_init(struct machine_desc *mdesc) */ #ifdef CONFIG_XIP_KERNEL map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & SECTION_MASK); - map.virtual = MODULE_START; + map.virtual = MODULES_VADDR; map.length = ((unsigned long)&_etext - map.virtual + ~SECTION_MASK) & SECTION_MASK; map.type = MT_ROM; create_mapping(&map); -- cgit v1.2.3 From 1547a01226bcc3fd575fd5383b8b55476a02b518 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 6 Nov 2008 10:53:54 -0600 Subject: [IA64] reorder Kconfig options to match x86 No functional change, just reorder some config options and update the "Power management and ACPI" label to match the defacto x86 standard. Signed-off-by: Bjorn Helgaas Signed-off-by: Tony Luck --- arch/ia64/Kconfig | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 9f481ba59a4..6bd91ed7cd0 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -586,7 +586,7 @@ source "fs/Kconfig.binfmt" endmenu -menu "Power management and ACPI" +menu "Power management and ACPI options" source "kernel/power/Kconfig" @@ -642,6 +642,8 @@ source "net/Kconfig" source "drivers/Kconfig" +source "arch/ia64/hp/sim/Kconfig" + config MSPEC tristate "Memory special operations driver" depends on IA64 @@ -653,6 +655,12 @@ config MSPEC source "fs/Kconfig" +source "arch/ia64/Kconfig.debug" + +source "security/Kconfig" + +source "crypto/Kconfig" + source "arch/ia64/kvm/Kconfig" source "lib/Kconfig" @@ -679,11 +687,3 @@ config IRQ_PER_CPU config IOMMU_HELPER def_bool (IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB || IA64_GENERIC || SWIOTLB) - -source "arch/ia64/hp/sim/Kconfig" - -source "arch/ia64/Kconfig.debug" - -source "security/Kconfig" - -source "crypto/Kconfig" -- cgit v1.2.3 From 62ee0540f5e5a804b79cae8b3c0185a85f02436b Mon Sep 17 00:00:00 2001 From: Doug Chapman Date: Wed, 5 Nov 2008 17:57:52 -0500 Subject: [IA64] fix boot panic caused by offline CPUs This fixes a regression introduced by 2c6e6db41f01b6b4eb98809350827c9678996698 "Minimize per_cpu reservations." That patch incorrectly used information about what CPUs are possible that was not yet initialized by ACPI. The end result was that per_cpu structures for offline CPUs were not initialized causing a NULL pointer reference. Since we cannot do the full acpi_boot_init() call any earlier, the simplest fix is to just parse the MADT for SAPIC entries early to find the CPU info. This should also allow for some cleanup of the code added by the "Minimize per_cpu reservations". This patch just fixes the regressions, the cleanup will come in a later patch. Signed-off-by: Doug Chapman Signed-off-by: Alex Chiang CC: Robin Holt Signed-off-by: Tony Luck --- arch/ia64/kernel/acpi.c | 29 ++++++++++++++++++++++++----- arch/ia64/kernel/setup.c | 7 ++++--- 2 files changed, 28 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 0635015d0aa..bd7acc71e8a 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -678,6 +678,30 @@ static int __init acpi_parse_fadt(struct acpi_table_header *table) return 0; } +int __init early_acpi_boot_init(void) +{ + int ret; + + /* + * do a partial walk of MADT to determine how many CPUs + * we have including offline CPUs + */ + if (acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) { + printk(KERN_ERR PREFIX "Can't find MADT\n"); + return 0; + } + + ret = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_SAPIC, + acpi_parse_lsapic, NR_CPUS); + if (ret < 1) + printk(KERN_ERR PREFIX + "Error parsing MADT - no LAPIC entries\n"); + + return 0; +} + + + int __init acpi_boot_init(void) { @@ -701,11 +725,6 @@ int __init acpi_boot_init(void) printk(KERN_ERR PREFIX "Error parsing LAPIC address override entry\n"); - if (acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_SAPIC, acpi_parse_lsapic, NR_CPUS) - < 1) - printk(KERN_ERR PREFIX - "Error parsing MADT - no LAPIC entries\n"); - if (acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_NMI, acpi_parse_lapic_nmi, 0) < 0) printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n"); diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index ae7911702bf..bf441f49682 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -561,8 +561,12 @@ setup_arch (char **cmdline_p) #ifdef CONFIG_ACPI /* Initialize the ACPI boot-time table parser */ acpi_table_init(); + early_acpi_boot_init(); # ifdef CONFIG_ACPI_NUMA acpi_numa_init(); +#ifdef CONFIG_ACPI_HOTPLUG_CPU + prefill_possible_map(); +#endif per_cpu_scan_finalize((cpus_weight(early_cpu_possible_map) == 0 ? 32 : cpus_weight(early_cpu_possible_map)), additional_cpus > 0 ? additional_cpus : 0); @@ -853,9 +857,6 @@ void __init setup_per_cpu_areas (void) { /* start_kernel() requires this... */ -#ifdef CONFIG_ACPI_HOTPLUG_CPU - prefill_possible_map(); -#endif } /* -- cgit v1.2.3 From b1cce6b1b2785fd61454b47ceacb461815407662 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 4 Nov 2008 10:52:28 +0000 Subject: [ARM] mm: fix page table initialization MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As a result of the ptebits changes, we ended up marking device mappings as normal memory on ARMv7 CPUs, resulting in undesirable behaviour with serial ports and the like. While reviewing the section mapping table entries, other errors in the memory type settings for devices were detected and confirmed to prevent Xscale3 platforms booting. Tested on: OMAP34xx (ARMv7), OMAP24xx (ARMv6), OMAP16xx (ARM926T, ARMv5), PXA311 (Xscale3), PXA272 (Xscale), PXA255 (Xscale), IXP42x (Xscale), S3C2410 (ARM920T, ARMv4T), ARM720T (ARMv4T) StrongARM-110 (ARMv4) Acked-by: Tony Lindgren Tested-by: Robert Jarzmik Tested-by: Mike Rapoport Tested-by: Ben Dooks Tested-by: Anders Grafström Signed-off-by: Russell King --- arch/arm/include/asm/system.h | 4 ++ arch/arm/mm/mmu.c | 107 ++++++++++++++++++++++++++++++------------ arch/arm/mm/proc-v7.S | 12 ++--- 3 files changed, 87 insertions(+), 36 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 7aad78420f1..568020b34e3 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -42,6 +42,10 @@ #define CR_U (1 << 22) /* Unaligned access operation */ #define CR_XP (1 << 23) /* Extended page tables */ #define CR_VE (1 << 24) /* Vectored interrupts */ +#define CR_EE (1 << 25) /* Exception (Big) Endian */ +#define CR_TRE (1 << 28) /* TEX remap enable */ +#define CR_AFE (1 << 29) /* Access flag enable */ +#define CR_TE (1 << 30) /* Thumb exception enable */ /* * This is used to ensure the compiler did actually allocate the register we diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 34e53596ff1..e63db11f16a 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -180,20 +180,20 @@ void adjust_cr(unsigned long mask, unsigned long set) #endif #define PROT_PTE_DEVICE L_PTE_PRESENT|L_PTE_YOUNG|L_PTE_DIRTY|L_PTE_WRITE -#define PROT_SECT_DEVICE PMD_TYPE_SECT|PMD_SECT_XN|PMD_SECT_AP_WRITE +#define PROT_SECT_DEVICE PMD_TYPE_SECT|PMD_SECT_AP_WRITE static struct mem_type mem_types[] = { [MT_DEVICE] = { /* Strongly ordered / ARMv6 shared device */ .prot_pte = PROT_PTE_DEVICE | L_PTE_MT_DEV_SHARED | L_PTE_SHARED, .prot_l1 = PMD_TYPE_TABLE, - .prot_sect = PROT_SECT_DEVICE | PMD_SECT_UNCACHED, + .prot_sect = PROT_SECT_DEVICE | PMD_SECT_S, .domain = DOMAIN_IO, }, [MT_DEVICE_NONSHARED] = { /* ARMv6 non-shared device */ .prot_pte = PROT_PTE_DEVICE | L_PTE_MT_DEV_NONSHARED, .prot_l1 = PMD_TYPE_TABLE, - .prot_sect = PROT_SECT_DEVICE | PMD_SECT_TEX(2), + .prot_sect = PROT_SECT_DEVICE, .domain = DOMAIN_IO, }, [MT_DEVICE_CACHED] = { /* ioremap_cached */ @@ -205,7 +205,7 @@ static struct mem_type mem_types[] = { [MT_DEVICE_WC] = { /* ioremap_wc */ .prot_pte = PROT_PTE_DEVICE | L_PTE_MT_DEV_WC, .prot_l1 = PMD_TYPE_TABLE, - .prot_sect = PROT_SECT_DEVICE | PMD_SECT_BUFFERABLE, + .prot_sect = PROT_SECT_DEVICE, .domain = DOMAIN_IO, }, [MT_CACHECLEAN] = { @@ -273,22 +273,23 @@ static void __init build_mem_type_table(void) #endif /* - * On non-Xscale3 ARMv5-and-older systems, use CB=01 - * (Uncached/Buffered) for ioremap_wc() mappings. On XScale3 - * and ARMv6+, use TEXCB=00100 mappings (Inner/Outer Uncacheable - * in xsc3 parlance, Uncached Normal in ARMv6 parlance). + * Strip out features not present on earlier architectures. + * Pre-ARMv5 CPUs don't have TEX bits. Pre-ARMv6 CPUs or those + * without extended page tables don't have the 'Shared' bit. */ - if (cpu_is_xsc3() || cpu_arch >= CPU_ARCH_ARMv6) { - mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_TEX(1); - mem_types[MT_DEVICE_WC].prot_sect &= ~PMD_SECT_BUFFERABLE; - } + if (cpu_arch < CPU_ARCH_ARMv5) + for (i = 0; i < ARRAY_SIZE(mem_types); i++) + mem_types[i].prot_sect &= ~PMD_SECT_TEX(7); + if ((cpu_arch < CPU_ARCH_ARMv6 || !(cr & CR_XP)) && !cpu_is_xsc3()) + for (i = 0; i < ARRAY_SIZE(mem_types); i++) + mem_types[i].prot_sect &= ~PMD_SECT_S; /* - * ARMv5 and lower, bit 4 must be set for page tables. - * (was: cache "update-able on write" bit on ARM610) - * However, Xscale cores require this bit to be cleared. + * ARMv5 and lower, bit 4 must be set for page tables (was: cache + * "update-able on write" bit on ARM610). However, Xscale and + * Xscale3 require this bit to be cleared. */ - if (cpu_is_xscale()) { + if (cpu_is_xscale() || cpu_is_xsc3()) { for (i = 0; i < ARRAY_SIZE(mem_types); i++) { mem_types[i].prot_sect &= ~PMD_BIT4; mem_types[i].prot_l1 &= ~PMD_BIT4; @@ -302,6 +303,64 @@ static void __init build_mem_type_table(void) } } + /* + * Mark the device areas according to the CPU/architecture. + */ + if (cpu_is_xsc3() || (cpu_arch >= CPU_ARCH_ARMv6 && (cr & CR_XP))) { + if (!cpu_is_xsc3()) { + /* + * Mark device regions on ARMv6+ as execute-never + * to prevent speculative instruction fetches. + */ + mem_types[MT_DEVICE].prot_sect |= PMD_SECT_XN; + mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_XN; + mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_XN; + mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_XN; + } + if (cpu_arch >= CPU_ARCH_ARMv7 && (cr & CR_TRE)) { + /* + * For ARMv7 with TEX remapping, + * - shared device is SXCB=1100 + * - nonshared device is SXCB=0100 + * - write combine device mem is SXCB=0001 + * (Uncached Normal memory) + */ + mem_types[MT_DEVICE].prot_sect |= PMD_SECT_TEX(1); + mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_TEX(1); + mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_BUFFERABLE; + } else if (cpu_is_xsc3()) { + /* + * For Xscale3, + * - shared device is TEXCB=00101 + * - nonshared device is TEXCB=01000 + * - write combine device mem is TEXCB=00100 + * (Inner/Outer Uncacheable in xsc3 parlance) + */ + mem_types[MT_DEVICE].prot_sect |= PMD_SECT_TEX(1) | PMD_SECT_BUFFERED; + mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_TEX(2); + mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_TEX(1); + } else { + /* + * For ARMv6 and ARMv7 without TEX remapping, + * - shared device is TEXCB=00001 + * - nonshared device is TEXCB=01000 + * - write combine device mem is TEXCB=00100 + * (Uncached Normal in ARMv6 parlance). + */ + mem_types[MT_DEVICE].prot_sect |= PMD_SECT_BUFFERED; + mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_TEX(2); + mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_TEX(1); + } + } else { + /* + * On others, write combining is "Uncached/Buffered" + */ + mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_BUFFERABLE; + } + + /* + * Now deal with the memory-type mappings + */ cp = &cache_policies[cachepolicy]; vecs_pgprot = kern_pgprot = user_pgprot = cp->pte; @@ -317,12 +376,8 @@ static void __init build_mem_type_table(void) * Enable CPU-specific coherency if supported. * (Only available on XSC3 at the moment.) */ - if (arch_is_coherent()) { - if (cpu_is_xsc3()) { - mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S; - mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED; - } - } + if (arch_is_coherent() && cpu_is_xsc3()) + mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S; /* * ARMv6 and above have extended page tables. @@ -336,11 +391,6 @@ static void __init build_mem_type_table(void) mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE; mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE; - /* - * Mark the device area as "shared device" - */ - mem_types[MT_DEVICE].prot_sect |= PMD_SECT_BUFFERED; - #ifdef CONFIG_SMP /* * Mark memory with the "shared" attribute for SMP systems @@ -360,9 +410,6 @@ static void __init build_mem_type_table(void) mem_types[MT_LOW_VECTORS].prot_pte |= vecs_pgprot; mem_types[MT_HIGH_VECTORS].prot_pte |= vecs_pgprot; - if (cpu_arch < CPU_ARCH_ARMv5) - mem_types[MT_MINICLEAN].prot_sect &= ~PMD_SECT_TEX(1); - pgprot_user = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | user_pgprot); pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | L_PTE_WRITE | diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 07f82db7094..4d3c0a73e7f 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -115,7 +115,7 @@ ENTRY(cpu_v7_set_pte_ext) orr r3, r3, r2 orr r3, r3, #PTE_EXT_AP0 | 2 - tst r2, #1 << 4 + tst r1, #1 << 4 orrne r3, r3, #PTE_EXT_TEX(1) tst r1, #L_PTE_WRITE @@ -192,11 +192,11 @@ __v7_setup: mov pc, lr @ return to head.S:__ret ENDPROC(__v7_setup) - /* - * V X F I D LR - * .... ...E PUI. .T.T 4RVI ZFRS BLDP WCAM - * rrrr rrrx xxx0 0101 xxxx xxxx x111 xxxx < forced - * 0 110 0011 1.00 .111 1101 < we want + /* AT + * TFR EV X F I D LR + * .EEE ..EE PUI. .T.T 4RVI ZFRS BLDP WCAM + * rxxx rrxx xxx0 0101 xxxx xxxx x111 xxxx < forced + * 1 0 110 0011 1.00 .111 1101 < we want */ .type v7_crval, #object v7_crval: -- cgit v1.2.3 From c7cf72dcadbe39c2077b32460f86c9f8167be3be Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 6 Nov 2008 17:43:55 -0700 Subject: [ARM] xsc3: fix xsc3_l2_inv_range MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When 'start' and 'end' are less than a cacheline apart and 'start' is unaligned we are done after cleaning and invalidating the first cacheline. So check for (start < end) which will not walk off into invalid address ranges when (start > end). This issue was caught by drivers/dma/dmatest. 2.6.27 is susceptible. Cc: Cc: Haavard Skinnemoen Cc: Lothar WaÃ<9f>mann Cc: Lennert Buytenhek Cc: Eric Miao Signed-off-by: Dan Williams --- arch/arm/mm/cache-xsc3l2.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/cache-xsc3l2.c b/arch/arm/mm/cache-xsc3l2.c index 10b1bae1a25..464de893a98 100644 --- a/arch/arm/mm/cache-xsc3l2.c +++ b/arch/arm/mm/cache-xsc3l2.c @@ -98,7 +98,7 @@ static void xsc3_l2_inv_range(unsigned long start, unsigned long end) /* * Clean and invalidate partial last cache line. */ - if (end & (CACHE_LINE_SIZE - 1)) { + if (start < end && (end & (CACHE_LINE_SIZE - 1))) { xsc3_l2_clean_pa(end & ~(CACHE_LINE_SIZE - 1)); xsc3_l2_inv_pa(end & ~(CACHE_LINE_SIZE - 1)); end &= ~(CACHE_LINE_SIZE - 1); @@ -107,7 +107,7 @@ static void xsc3_l2_inv_range(unsigned long start, unsigned long end) /* * Invalidate all full cache lines between 'start' and 'end'. */ - while (start != end) { + while (start < end) { xsc3_l2_inv_pa(start); start += CACHE_LINE_SIZE; } -- cgit v1.2.3 From 47cb2ed9df2789fc4a3fe1201e475078f93c4839 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Thu, 6 Nov 2008 13:48:24 -0800 Subject: x86, xen: fix use of pgd_page now that it really does return a page Impact: fix 32-bit Xen guest boot crash On 32-bit PAE, pud_page, for no good reason, didn't really return a struct page *. Since Jan Beulich's fix "i386/PAE: fix pud_page()", pud_page does return a struct page *. Because PAE has 3 pagetable levels, the pud level is folded into the pgd level, so pgd_page() is the same as pud_page(), and now returns a struct page *. Update the xen/mmu.c code which uses pgd_page() accordingly. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar --- arch/x86/xen/mmu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index aba77b2b7d1..49697d86c6a 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -874,7 +874,7 @@ static void __xen_pgd_pin(struct mm_struct *mm, pgd_t *pgd) #else /* CONFIG_X86_32 */ #ifdef CONFIG_X86_PAE /* Need to make sure unshared kernel PMD is pinnable */ - xen_pin_page(mm, virt_to_page(pgd_page(pgd[pgd_index(TASK_SIZE)])), + xen_pin_page(mm, pgd_page(pgd[pgd_index(TASK_SIZE)]), PT_PMD); #endif xen_do_pin(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(pgd))); @@ -991,7 +991,7 @@ static void __xen_pgd_unpin(struct mm_struct *mm, pgd_t *pgd) #ifdef CONFIG_X86_PAE /* Need to make sure unshared kernel PMD is unpinned */ - xen_unpin_page(mm, virt_to_page(pgd_page(pgd[pgd_index(TASK_SIZE)])), + xen_unpin_page(mm, pgd_page(pgd[pgd_index(TASK_SIZE)]), PT_PMD); #endif -- cgit v1.2.3 From d05fdf316067cd311d5e7add08da26ded8a58080 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Tue, 28 Oct 2008 19:23:06 +1100 Subject: xen: make sure stray alias mappings are gone before pinning Xen requires that all mappings of pagetable pages are read-only, so that they can't be updated illegally. As a result, if a page is being turned into a pagetable page, we need to make sure all its mappings are RO. If the page had been used for ioremap or vmalloc, it may still have left over mappings as a result of not having been lazily unmapped. This change makes sure we explicitly mop them all up before pinning the page. Unlike aliases created by kmap, the there can be vmalloc aliases even for non-high pages, so we must do the flush unconditionally. Signed-off-by: Jeremy Fitzhardinge Cc: Linux Memory Management List Cc: Nick Piggin Signed-off-by: Ingo Molnar --- arch/x86/xen/enlighten.c | 5 +++-- arch/x86/xen/mmu.c | 9 ++++++--- 2 files changed, 9 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index b61534c7a4c..5e4686d70f6 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -863,15 +863,16 @@ static void xen_alloc_ptpage(struct mm_struct *mm, unsigned long pfn, unsigned l if (PagePinned(virt_to_page(mm->pgd))) { SetPagePinned(page); + vm_unmap_aliases(); if (!PageHighMem(page)) { make_lowmem_page_readonly(__va(PFN_PHYS((unsigned long)pfn))); if (level == PT_PTE && USE_SPLIT_PTLOCKS) pin_pagetable_pfn(MMUEXT_PIN_L1_TABLE, pfn); - } else + } else { /* make sure there are no stray mappings of this page */ kmap_flush_unused(); - vm_unmap_aliases(); + } } } diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index aba77b2b7d1..89f3b6edc65 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -850,13 +850,16 @@ static int xen_pin_page(struct mm_struct *mm, struct page *page, read-only, and can be pinned. */ static void __xen_pgd_pin(struct mm_struct *mm, pgd_t *pgd) { + vm_unmap_aliases(); + xen_mc_batch(); - if (xen_pgd_walk(mm, xen_pin_page, USER_LIMIT)) { - /* re-enable interrupts for kmap_flush_unused */ + if (xen_pgd_walk(mm, xen_pin_page, USER_LIMIT)) { + /* re-enable interrupts for flushing */ xen_mc_issue(0); + kmap_flush_unused(); - vm_unmap_aliases(); + xen_mc_batch(); } -- cgit v1.2.3 From 7c64ade53a6f977d73f16243865c42ceae999aea Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Fri, 7 Nov 2008 14:02:49 +0100 Subject: oprofile: Fix p6 counter overflow check Fix the counter overflow check for CPUs with counter width > 32 I had a similar change in a different patch that I didn't submit and I didn't notice the problem earlier because it was always tested together. Signed-off-by: Andi Kleen Signed-off-by: Robert Richter --- arch/x86/oprofile/op_model_ppro.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c index 0620d6d45f7..3f1b81a83e2 100644 --- a/arch/x86/oprofile/op_model_ppro.c +++ b/arch/x86/oprofile/op_model_ppro.c @@ -27,8 +27,7 @@ static int num_counters = 2; static int counter_width = 32; #define CTR_IS_RESERVED(msrs, c) (msrs->counters[(c)].addr ? 1 : 0) -#define CTR_READ(l, h, msrs, c) do {rdmsr(msrs->counters[(c)].addr, (l), (h)); } while (0) -#define CTR_OVERFLOWED(n) (!((n) & (1U<<(counter_width-1)))) +#define CTR_OVERFLOWED(n) (!((n) & (1ULL<<(counter_width-1)))) #define CTRL_IS_RESERVED(msrs, c) (msrs->controls[(c)].addr ? 1 : 0) #define CTRL_READ(l, h, msrs, c) do {rdmsr((msrs->controls[(c)].addr), (l), (h)); } while (0) @@ -124,14 +123,14 @@ static void ppro_setup_ctrs(struct op_msrs const * const msrs) static int ppro_check_ctrs(struct pt_regs * const regs, struct op_msrs const * const msrs) { - unsigned int low, high; + u64 val; int i; for (i = 0 ; i < num_counters; ++i) { if (!reset_value[i]) continue; - CTR_READ(low, high, msrs, i); - if (CTR_OVERFLOWED(low)) { + rdmsrl(msrs->counters[i].addr, val); + if (CTR_OVERFLOWED(val)) { oprofile_add_sample(regs, i); wrmsrl(msrs->counters[i].addr, -reset_value[i]); } -- cgit v1.2.3 From 17c1f07ed70afa4f3941745fc3cc173e2a0365fe Mon Sep 17 00:00:00 2001 From: Jay Lan Date: Fri, 7 Nov 2008 09:51:55 -0800 Subject: [IA64] Reserve elfcorehdr memory in CONFIG_CRASH_DUMP IA64 kdump kernel failed to initialize /proc/vmcore in 2.6.28-rc2. A bug was introduced in this patch commit: d9a9855d0b06ca6d6cc92596fedcc03f8512e062 always reserve elfcore header memory in crash kernel The problem was that the call to reserve_elfcorehdr() should be placed in CONFIG_CRASH_DUMP rather than in CONFIG_CRASH_KERNEL, which does not exist. Signed-off-by: Jay Lan Acked-by: Simon Hormon Signed-off-by: Tony Luck --- arch/ia64/kernel/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index bf441f49682..865af27c773 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -359,7 +359,7 @@ reserve_memory (void) } #endif -#ifdef CONFIG_CRASH_KERNEL +#ifdef CONFIG_CRASH_DUMP if (reserve_elfcorehdr(&rsvd_region[n].start, &rsvd_region[n].end) == 0) n++; -- cgit v1.2.3 From 0d12cdd5f883f508d33b85c1bae98fa28987c8c7 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Sat, 8 Nov 2008 16:19:55 +0100 Subject: sched: improve sched_clock() performance in scheduler-intense workloads native_read_tsc() overhead accounts for 20% of the system overhead: 659567 system_call 41222.9375 686796 schedule 435.7843 718382 __switch_to 665.1685 823875 switch_mm 4526.7857 1883122 native_read_tsc 55385.9412 9761990 total 2.8468 this is large part due to the rdtsc_barrier() that is done before and after reading the TSC. But sched_clock() is not a precise clock in the GTOD sense, using such barriers is completely pointless. So remove the barriers and only use them in vget_cycles(). This improves lat_ctx performance by about 5%. Signed-off-by: Ingo Molnar --- arch/x86/include/asm/msr.h | 2 -- arch/x86/include/asm/tsc.h | 8 +++++++- 2 files changed, 7 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h index 46be2fa7ac2..c2a812ebde8 100644 --- a/arch/x86/include/asm/msr.h +++ b/arch/x86/include/asm/msr.h @@ -108,9 +108,7 @@ static __always_inline unsigned long long __native_read_tsc(void) { DECLARE_ARGS(val, low, high); - rdtsc_barrier(); asm volatile("rdtsc" : EAX_EDX_RET(val, low, high)); - rdtsc_barrier(); return EAX_EDX_VAL(val, low, high); } diff --git a/arch/x86/include/asm/tsc.h b/arch/x86/include/asm/tsc.h index 38ae163cc91..9cd83a8e40d 100644 --- a/arch/x86/include/asm/tsc.h +++ b/arch/x86/include/asm/tsc.h @@ -34,6 +34,8 @@ static inline cycles_t get_cycles(void) static __always_inline cycles_t vget_cycles(void) { + cycles_t cycles; + /* * We only do VDSOs on TSC capable CPUs, so this shouldnt * access boot_cpu_data (which is not VDSO-safe): @@ -42,7 +44,11 @@ static __always_inline cycles_t vget_cycles(void) if (!cpu_has_tsc) return 0; #endif - return (cycles_t)__native_read_tsc(); + rdtsc_barrier(); + cycles = (cycles_t)__native_read_tsc(); + rdtsc_barrier(); + + return cycles; } extern void tsc_init(void); -- cgit v1.2.3 From 7cbaef9c83e58bbd4bdd534b09052b6c5ec457d5 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Sat, 8 Nov 2008 17:05:38 +0100 Subject: sched: optimize sched_clock() a bit sched_clock() uses cycles_2_ns() needlessly - which is an irq-disabling variant of __cycles_2_ns(). Most of the time sched_clock() is called with irqs disabled already. The few places that call it with irqs enabled need to be updated. Signed-off-by: Ingo Molnar --- arch/x86/kernel/tsc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index 2ef80e30192..424093b157d 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -55,7 +55,7 @@ u64 native_sched_clock(void) rdtscll(this_offset); /* return the value in ns */ - return cycles_2_ns(this_offset); + return __cycles_2_ns(this_offset); } /* We need to define a real function for sched_clock, to override the -- cgit v1.2.3 From 47c8e1a83ee14dc50031d513e2274adef8d4c19c Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 19 Nov 2008 15:41:30 +0000 Subject: [ARM] S3C: Add register defines for new style framebuffer Provide the initial register definitions for the newer style of framebuffer cores found in the Samsung SoCs such as S3C2450, S3C64XX. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c6400/include/mach/regs-fb.h | 259 +++++++++++++++++++ arch/arm/plat-s3c/include/plat/fb.h | 73 ++++++ arch/arm/plat-s3c/include/plat/regs-fb.h | 366 +++++++++++++++++++++++++++ 3 files changed, 698 insertions(+) create mode 100644 arch/arm/mach-s3c6400/include/mach/regs-fb.h create mode 100644 arch/arm/plat-s3c/include/plat/fb.h create mode 100644 arch/arm/plat-s3c/include/plat/regs-fb.h (limited to 'arch') diff --git a/arch/arm/mach-s3c6400/include/mach/regs-fb.h b/arch/arm/mach-s3c6400/include/mach/regs-fb.h new file mode 100644 index 00000000000..47019795ce0 --- /dev/null +++ b/arch/arm/mach-s3c6400/include/mach/regs-fb.h @@ -0,0 +1,259 @@ +/* arch/arm/mach-s3c6400/include/mach/regs-fb.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C64XX - new-style framebuffer register definitions + * + * This is the register set for the new style framebuffer interface + * found from the S3C2443 onwards and specifically the S3C64XX series + * S3C6400 and S3C6410. + * + * The file contains the cpu specific items which change between whichever + * architecture is selected. See for the core definitions + * that are the same. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* include the core definitions here, in case we really do need to + * override them at a later date. +*/ + +#include + +#define S3C_FB_MAX_WIN (5) /* number of hardware windows available. */ +#define VIDCON1_FSTATUS_EVEN (1 << 15) + +/* Video timing controls */ +#define VIDTCON0 (0x10) +#define VIDTCON1 (0x14) +#define VIDTCON2 (0x18) + +/* Window position controls */ + +#define WINCON(_win) (0x20 + ((_win) * 4)) + +/* OSD1 and OSD4 do not have register D */ + +#define VIDOSD_A(_win) (0x40 + ((_win) * 16)) +#define VIDOSD_B(_win) (0x44 + ((_win) * 16)) +#define VIDOSD_C(_win) (0x48 + ((_win) * 16)) +#define VIDOSD_D(_win) (0x4C + ((_win) * 16)) + +/* Video buffer addresses */ + +#define VIDW_BUF_START(_buff) (0xA0 + ((_buff) * 8)) +#define VIDW_BUF_START1(_buff) (0xA4 + ((_buff) * 8)) +#define VIDW_BUF_END(_buff) (0xD0 + ((_buff) * 8)) +#define VIDW_BUF_END1(_buff) (0xD4 + ((_buff) * 8)) +#define VIDW_BUF_SIZE(_buff) (0x100 + ((_buff) * 4)) + +#define VIDINTCON0 (0x130) + +#define WxKEYCONy(_win, _con) ((0x140 + ((_win) * 8)) + ((_con) * 4)) + +/* WINCONx */ + +#define WINCONx_CSCWIDTH_MASK (0x3 << 26) +#define WINCONx_CSCWIDTH_SHIFT (26) +#define WINCONx_CSCWIDTH_WIDE (0x0 << 26) +#define WINCONx_CSCWIDTH_NARROW (0x3 << 26) + +#define WINCONx_ENLOCAL (1 << 22) +#define WINCONx_BUFSTATUS (1 << 21) +#define WINCONx_BUFSEL (1 << 20) +#define WINCONx_BUFAUTOEN (1 << 19) +#define WINCONx_YCbCr (1 << 13) + +#define WINCON1_LOCALSEL_CAMIF (1 << 23) + +#define WINCON2_LOCALSEL_CAMIF (1 << 23) +#define WINCON2_BLD_PIX (1 << 6) + +#define WINCON2_ALPHA_SEL (1 << 1) +#define WINCON2_BPPMODE_MASK (0xf << 2) +#define WINCON2_BPPMODE_SHIFT (2) +#define WINCON2_BPPMODE_1BPP (0x0 << 2) +#define WINCON2_BPPMODE_2BPP (0x1 << 2) +#define WINCON2_BPPMODE_4BPP (0x2 << 2) +#define WINCON2_BPPMODE_8BPP_1232 (0x4 << 2) +#define WINCON2_BPPMODE_16BPP_565 (0x5 << 2) +#define WINCON2_BPPMODE_16BPP_A1555 (0x6 << 2) +#define WINCON2_BPPMODE_16BPP_I1555 (0x7 << 2) +#define WINCON2_BPPMODE_18BPP_666 (0x8 << 2) +#define WINCON2_BPPMODE_18BPP_A1665 (0x9 << 2) +#define WINCON2_BPPMODE_19BPP_A1666 (0xa << 2) +#define WINCON2_BPPMODE_24BPP_888 (0xb << 2) +#define WINCON2_BPPMODE_24BPP_A1887 (0xc << 2) +#define WINCON2_BPPMODE_25BPP_A1888 (0xd << 2) +#define WINCON2_BPPMODE_28BPP_A4888 (0xd << 2) + +#define WINCON3_BLD_PIX (1 << 6) + +#define WINCON3_ALPHA_SEL (1 << 1) +#define WINCON3_BPPMODE_MASK (0xf << 2) +#define WINCON3_BPPMODE_SHIFT (2) +#define WINCON3_BPPMODE_1BPP (0x0 << 2) +#define WINCON3_BPPMODE_2BPP (0x1 << 2) +#define WINCON3_BPPMODE_4BPP (0x2 << 2) +#define WINCON3_BPPMODE_16BPP_565 (0x5 << 2) +#define WINCON3_BPPMODE_16BPP_A1555 (0x6 << 2) +#define WINCON3_BPPMODE_16BPP_I1555 (0x7 << 2) +#define WINCON3_BPPMODE_18BPP_666 (0x8 << 2) +#define WINCON3_BPPMODE_18BPP_A1665 (0x9 << 2) +#define WINCON3_BPPMODE_19BPP_A1666 (0xa << 2) +#define WINCON3_BPPMODE_24BPP_888 (0xb << 2) +#define WINCON3_BPPMODE_24BPP_A1887 (0xc << 2) +#define WINCON3_BPPMODE_25BPP_A1888 (0xd << 2) +#define WINCON3_BPPMODE_28BPP_A4888 (0xd << 2) + +#define VIDINTCON0_FIFIOSEL_WINDOW2 (0x10 << 5) +#define VIDINTCON0_FIFIOSEL_WINDOW3 (0x20 << 5) +#define VIDINTCON0_FIFIOSEL_WINDOW4 (0x40 << 5) + +#define DITHMODE (0x170) +#define WINxMAP(_win) (0x180 + ((_win) * 4)) + + +#define DITHMODE_R_POS_MASK (0x3 << 5) +#define DITHMODE_R_POS_SHIFT (5) +#define DITHMODE_R_POS_8BIT (0x0 << 5) +#define DITHMODE_R_POS_6BIT (0x1 << 5) +#define DITHMODE_R_POS_5BIT (0x2 << 5) + +#define DITHMODE_G_POS_MASK (0x3 << 3) +#define DITHMODE_G_POS_SHIFT (3) +#define DITHMODE_G_POS_8BIT (0x0 << 3) +#define DITHMODE_G_POS_6BIT (0x1 << 3) +#define DITHMODE_G_POS_5BIT (0x2 << 3) + +#define DITHMODE_B_POS_MASK (0x3 << 1) +#define DITHMODE_B_POS_SHIFT (1) +#define DITHMODE_B_POS_8BIT (0x0 << 1) +#define DITHMODE_B_POS_6BIT (0x1 << 1) +#define DITHMODE_B_POS_5BIT (0x2 << 1) + +#define DITHMODE_DITH_EN (1 << 0) + +#define WPALCON (0x1A0) + +#define WPALCON_W4PAL_16BPP_A555 (1 << 8) +#define WPALCON_W3PAL_16BPP_A555 (1 << 7) +#define WPALCON_W2PAL_16BPP_A555 (1 << 6) + +/* Palette registers */ + +#define WIN2_PAL(_entry) (0x300 + ((_entry) * 2)) +#define WIN3_PAL(_entry) (0x320 + ((_entry) * 2)) +#define WIN4_PAL(_entry) (0x340 + ((_entry) * 2)) +#define WIN0_PAL(_entry) (0x400 + ((_entry) * 4)) +#define WIN1_PAL(_entry) (0x800 + ((_entry) * 4)) + +/* system specific implementation code for palette sizes, and other + * information that changes depending on which architecture is being + * compiled. +*/ + +/* return true if window _win has OSD register D */ +#define s3c_fb_has_osd_d(_win) ((_win) != 4 && (_win) != 0) + +static inline unsigned int s3c_fb_win_pal_size(unsigned int win) +{ + if (win < 2) + return 256; + if (win < 4) + return 16; + if (win == 4) + return 4; + + BUG(); /* shouldn't get here */ +} + +static inline int s3c_fb_validate_win_bpp(unsigned int win, unsigned int bpp) +{ + /* all windows can do 1/2 bpp */ + + if ((bpp == 25 || bpp == 19) && win == 0) + return 0; /* win 0 does not have 19 or 25bpp modes */ + + if (bpp == 4 && win == 4) + return 0; + + if (bpp == 8 && (win >= 3)) + return 0; /* win 3/4 cannot do 8bpp in any mode */ + + return 1; +} + +static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg) +{ + switch (window) { + case 0: return WIN0_PAL(reg); + case 1: return WIN1_PAL(reg); + case 2: return WIN2_PAL(reg); + case 3: return WIN3_PAL(reg); + case 4: return WIN4_PAL(reg); + } + + BUG(); +} + +static inline int s3c_fb_pal_is16(unsigned int window) +{ + return window > 1; +} + +struct s3c_fb_palette { + struct fb_bitfield r; + struct fb_bitfield g; + struct fb_bitfield b; + struct fb_bitfield a; +}; + +static inline void s3c_fb_init_palette(unsigned int window, + struct s3c_fb_palette *palette) +{ + if (window < 2) { + /* Windows 0/1 are 8/8/8 or A/8/8/8 */ + palette->r.offset = 16; + palette->r.length = 8; + palette->g.offset = 8; + palette->g.length = 8; + palette->b.offset = 0; + palette->b.length = 8; + } else { + /* currently we assume RGB 5/6/5 */ + palette->r.offset = 11; + palette->r.length = 5; + palette->g.offset = 5; + palette->g.length = 6; + palette->b.offset = 0; + palette->b.length = 5; + } +} + +/* Notes on per-window bpp settings + * + * Value Win0 Win1 Win2 Win3 Win 4 + * 0000 1(P) 1(P) 1(P) 1(P) 1(P) + * 0001 2(P) 2(P) 2(P) 2(P) 2(P) + * 0010 4(P) 4(P) 4(P) 4(P) -none- + * 0011 8(P) 8(P) -none- -none- -none- + * 0100 -none- 8(A232) 8(A232) -none- -none- + * 0101 16(565) 16(565) 16(565) 16(565) 16(565) + * 0110 -none- 16(A555) 16(A555) 16(A555) 16(A555) + * 0111 16(I555) 16(I565) 16(I555) 16(I555) 16(I555) + * 1000 18(666) 18(666) 18(666) 18(666) 18(666) + * 1001 -none- 18(A665) 18(A665) 18(A665) 16(A665) + * 1010 -none- 19(A666) 19(A666) 19(A666) 19(A666) + * 1011 24(888) 24(888) 24(888) 24(888) 24(888) + * 1100 -none- 24(A887) 24(A887) 24(A887) 24(A887) + * 1101 -none- 25(A888) 25(A888) 25(A888) 25(A888) + * 1110 -none- -none- -none- -none- -none- + * 1111 -none- -none- -none- -none- -none- +*/ diff --git a/arch/arm/plat-s3c/include/plat/fb.h b/arch/arm/plat-s3c/include/plat/fb.h new file mode 100644 index 00000000000..214ff561b0d --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/fb.h @@ -0,0 +1,73 @@ +/* linux/arch/arm/plat-s3c/include/plat/fb.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C - FB platform data definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __PLAT_S3C_FB_H +#define __PLAT_S3C_FB_H __FILE__ + +/** + * struct s3c_fb_pd_win - per window setup data + * @win_mode: The display parameters to initialise (not for window 0) + * @virtual_x: The virtual X size. + * @virtual_y: The virtual Y size. + */ +struct s3c_fb_pd_win { + struct fb_videomode win_mode; + + unsigned short default_bpp; + unsigned short max_bpp; + unsigned short virtual_x; + unsigned short virtual_y; +}; + +/** + * struct s3c_fb_platdata - S3C driver platform specific information + * @setup_gpio: Setup the external GPIO pins to the right state to transfer + * the data from the display system to the connected display + * device. + * @vidcon0: The base vidcon0 values to control the panel data format. + * @vidcon1: The base vidcon1 values to control the panel data output. + * @win: The setup data for each hardware window, or NULL for unused. + * @display_mode: The LCD output display mode. + * + * The platform data supplies the video driver with all the information + * it requires to work with the display(s) attached to the machine. It + * controls the initial mode, the number of display windows (0 is always + * the base framebuffer) that are initialised etc. + * + */ +struct s3c_fb_platdata { + void (*setup_gpio)(void); + + struct s3c_fb_pd_win *win[S3C_FB_MAX_WIN]; + + u32 vidcon0; + u32 vidcon1; +}; + +/** + * s3c_fb_set_platdata() - Setup the FB device with platform data. + * @pd: The platform data to set. The data is copied from the passed structure + * so the machine data can mark the data __initdata so that any unused + * machines will end up dumping their data at runtime. + */ +extern void s3c_fb_set_platdata(struct s3c_fb_platdata *pd); + +/** + * s3c64xx_fb_gpio_setup_24bpp() - S3C64XX setup function for 24bpp LCD + * + * Initialise the GPIO for an 24bpp LCD display on the RGB interface. + */ +extern void s3c64xx_fb_gpio_setup_24bpp(void); + +#endif /* __PLAT_S3C_FB_H */ diff --git a/arch/arm/plat-s3c/include/plat/regs-fb.h b/arch/arm/plat-s3c/include/plat/regs-fb.h new file mode 100644 index 00000000000..e9ee599d430 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/regs-fb.h @@ -0,0 +1,366 @@ +/* arch/arm/plat-s3c/include/plat/regs-fb.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C Platform - new-style framebuffer register definitions + * + * This is the register set for the new style framebuffer interface + * found from the S3C2443 onwards into the S3C2416, S3C2450 and the + * S3C64XX series such as the S3C6400 and S3C6410. + * + * The file does not contain the cpu specific items which are based on + * whichever architecture is selected, it only contains the core of the + * register set. See to get the specifics. + * + * Note, we changed to using regs-fb.h as it avoids any clashes with + * the original regs-lcd.h so out of the way of regs-lcd.h as well as + * indicating the newer block is much more than just an LCD interface. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* Please do not include this file directly, use to + * ensure all the localised SoC support is included as necessary. +*/ + +/* VIDCON0 */ + +#define VIDCON0 (0x00) +#define VIDCON0_INTERLACE (1 << 29) +#define VIDCON0_VIDOUT_MASK (0x3 << 26) +#define VIDCON0_VIDOUT_SHIFT (26) +#define VIDCON0_VIDOUT_RGB (0x0 << 26) +#define VIDCON0_VIDOUT_TV (0x1 << 26) +#define VIDCON0_VIDOUT_I80_LDI0 (0x2 << 26) +#define VIDCON0_VIDOUT_I80_LDI1 (0x3 << 26) + +#define VIDCON0_L1_DATA_MASK (0x7 << 23) +#define VIDCON0_L1_DATA_SHIFT (23) +#define VIDCON0_L1_DATA_16BPP (0x0 << 23) +#define VIDCON0_L1_DATA_18BPP16 (0x1 << 23) +#define VIDCON0_L1_DATA_18BPP9 (0x2 << 23) +#define VIDCON0_L1_DATA_24BPP (0x3 << 23) +#define VIDCON0_L1_DATA_18BPP (0x4 << 23) +#define VIDCON0_L1_DATA_16BPP8 (0x5 << 23) + +#define VIDCON0_L0_DATA_MASK (0x7 << 20) +#define VIDCON0_L0_DATA_SHIFT (20) +#define VIDCON0_L0_DATA_16BPP (0x0 << 20) +#define VIDCON0_L0_DATA_18BPP16 (0x1 << 20) +#define VIDCON0_L0_DATA_18BPP9 (0x2 << 20) +#define VIDCON0_L0_DATA_24BPP (0x3 << 20) +#define VIDCON0_L0_DATA_18BPP (0x4 << 20) +#define VIDCON0_L0_DATA_16BPP8 (0x5 << 20) + +#define VIDCON0_PNRMODE_MASK (0x3 << 17) +#define VIDCON0_PNRMODE_SHIFT (17) +#define VIDCON0_PNRMODE_RGB (0x0 << 17) +#define VIDCON0_PNRMODE_BGR (0x1 << 17) +#define VIDCON0_PNRMODE_SERIAL_RGB (0x2 << 17) +#define VIDCON0_PNRMODE_SERIAL_BGR (0x3 << 17) + +#define VIDCON0_CLKVALUP (1 << 16) +#define VIDCON0_CLKVAL_F_MASK (0xff << 6) +#define VIDCON0_CLKVAL_F_SHIFT (6) +#define VIDCON0_CLKVAL_F_LIMIT (0xff) +#define VIDCON0_CLKVAL_F(_x) ((_x) << 6) +#define VIDCON0_VLCKFREE (1 << 5) +#define VIDCON0_CLKDIR (1 << 4) + +#define VIDCON0_CLKSEL_MASK (0x3 << 2) +#define VIDCON0_CLKSEL_SHIFT (2) +#define VIDCON0_CLKSEL_HCLK (0x0 << 2) +#define VIDCON0_CLKSEL_LCD (0x1 << 2) +#define VIDCON0_CLKSEL_27M (0x3 << 2) + +#define VIDCON0_ENVID (1 << 1) +#define VIDCON0_ENVID_F (1 << 0) + +#define VIDCON1 (0x04) +#define VIDCON1_LINECNT_MASK (0x7ff << 16) +#define VIDCON1_LINECNT_SHIFT (16) +#define VIDCON1_LINECNT_GET(_v) (((_v) >> 16) & 0x7ff) +#define VIDCON1_VSTATUS_MASK (0x3 << 13) +#define VIDCON1_VSTATUS_SHIFT (13) +#define VIDCON1_VSTATUS_VSYNC (0x0 << 13) +#define VIDCON1_VSTATUS_BACKPORCH (0x1 << 13) +#define VIDCON1_VSTATUS_ACTIVE (0x2 << 13) +#define VIDCON1_VSTATUS_FRONTPORCH (0x0 << 13) + +#define VIDCON1_INV_VCLK (1 << 7) +#define VIDCON1_INV_HSYNC (1 << 6) +#define VIDCON1_INV_VSYNC (1 << 5) +#define VIDCON1_INV_VDEN (1 << 4) + +/* VIDCON2 */ + +#define VIDCON2 (0x08) +#define VIDCON2_EN601 (1 << 23) +#define VIDCON2_TVFMTSEL_SW (1 << 14) + +#define VIDCON2_TVFMTSEL1_MASK (0x3 << 12) +#define VIDCON2_TVFMTSEL1_SHIFT (12) +#define VIDCON2_TVFMTSEL1_RGB (0x0 << 12) +#define VIDCON2_TVFMTSEL1_YUV422 (0x1 << 12) +#define VIDCON2_TVFMTSEL1_YUV444 (0x2 << 12) + +#define VIDCON2_ORGYCbCr (1 << 8) +#define VIDCON2_YUVORDCrCb (1 << 7) + +/* VIDTCON0 */ + +#define VIDTCON0_VBPDE_MASK (0xff << 24) +#define VIDTCON0_VBPDE_SHIFT (24) +#define VIDTCON0_VBPDE_LIMIT (0xff) +#define VIDTCON0_VBPDE(_x) ((_x) << 24) + +#define VIDTCON0_VBPD_MASK (0xff << 16) +#define VIDTCON0_VBPD_SHIFT (16) +#define VIDTCON0_VBPD_LIMIT (0xff) +#define VIDTCON0_VBPD(_x) ((_x) << 16) + +#define VIDTCON0_VFPD_MASK (0xff << 8) +#define VIDTCON0_VFPD_SHIFT (8) +#define VIDTCON0_VFPD_LIMIT (0xff) +#define VIDTCON0_VFPD(_x) ((_x) << 8) + +#define VIDTCON0_VSPW_MASK (0xff << 0) +#define VIDTCON0_VSPW_SHIFT (0) +#define VIDTCON0_VSPW_LIMIT (0xff) +#define VIDTCON0_VSPW(_x) ((_x) << 0) + +/* VIDTCON1 */ + +#define VIDTCON1_VFPDE_MASK (0xff << 24) +#define VIDTCON1_VFPDE_SHIFT (24) +#define VIDTCON1_VFPDE_LIMIT (0xff) +#define VIDTCON1_VFPDE(_x) ((_x) << 24) + +#define VIDTCON1_HBPD_MASK (0xff << 16) +#define VIDTCON1_HBPD_SHIFT (16) +#define VIDTCON1_HBPD_LIMIT (0xff) +#define VIDTCON1_HBPD(_x) ((_x) << 16) + +#define VIDTCON1_HFPD_MASK (0xff << 8) +#define VIDTCON1_HFPD_SHIFT (8) +#define VIDTCON1_HFPD_LIMIT (0xff) +#define VIDTCON1_HFPD(_x) ((_x) << 8) + +#define VIDTCON1_HSPW_MASK (0xff << 0) +#define VIDTCON1_HSPW_SHIFT (0) +#define VIDTCON1_HSPW_LIMIT (0xff) +#define VIDTCON1_HSPW(_x) ((_x) << 0) + +#define VIDTCON2 (0x18) +#define VIDTCON2_LINEVAL_MASK (0x7ff << 11) +#define VIDTCON2_LINEVAL_SHIFT (11) +#define VIDTCON2_LINEVAL_LIMIT (0x7ff) +#define VIDTCON2_LINEVAL(_x) ((_x) << 11) + +#define VIDTCON2_HOZVAL_MASK (0x7ff << 0) +#define VIDTCON2_HOZVAL_SHIFT (0) +#define VIDTCON2_HOZVAL_LIMIT (0x7ff) +#define VIDTCON2_HOZVAL(_x) ((_x) << 0) + +/* WINCONx */ + + +#define WINCONx_BITSWP (1 << 18) +#define WINCONx_BYTSWP (1 << 17) +#define WINCONx_HAWSWP (1 << 16) +#define WINCONx_BURSTLEN_MASK (0x3 << 9) +#define WINCONx_BURSTLEN_SHIFT (9) +#define WINCONx_BURSTLEN_16WORD (0x0 << 9) +#define WINCONx_BURSTLEN_8WORD (0x1 << 9) +#define WINCONx_BURSTLEN_4WORD (0x2 << 9) + +#define WINCONx_ENWIN (1 << 0) +#define WINCON0_BPPMODE_MASK (0xf << 2) +#define WINCON0_BPPMODE_SHIFT (2) +#define WINCON0_BPPMODE_1BPP (0x0 << 2) +#define WINCON0_BPPMODE_2BPP (0x1 << 2) +#define WINCON0_BPPMODE_4BPP (0x2 << 2) +#define WINCON0_BPPMODE_8BPP_PALETTE (0x3 << 2) +#define WINCON0_BPPMODE_16BPP_565 (0x5 << 2) +#define WINCON0_BPPMODE_16BPP_1555 (0x7 << 2) +#define WINCON0_BPPMODE_18BPP_666 (0x8 << 2) +#define WINCON0_BPPMODE_24BPP_888 (0xb << 2) + +#define WINCON1_BLD_PIX (1 << 6) + +#define WINCON1_ALPHA_SEL (1 << 1) +#define WINCON1_BPPMODE_MASK (0xf << 2) +#define WINCON1_BPPMODE_SHIFT (2) +#define WINCON1_BPPMODE_1BPP (0x0 << 2) +#define WINCON1_BPPMODE_2BPP (0x1 << 2) +#define WINCON1_BPPMODE_4BPP (0x2 << 2) +#define WINCON1_BPPMODE_8BPP_PALETTE (0x3 << 2) +#define WINCON1_BPPMODE_8BPP_1232 (0x4 << 2) +#define WINCON1_BPPMODE_16BPP_565 (0x5 << 2) +#define WINCON1_BPPMODE_16BPP_A1555 (0x6 << 2) +#define WINCON1_BPPMODE_16BPP_I1555 (0x7 << 2) +#define WINCON1_BPPMODE_18BPP_666 (0x8 << 2) +#define WINCON1_BPPMODE_18BPP_A1665 (0x9 << 2) +#define WINCON1_BPPMODE_19BPP_A1666 (0xa << 2) +#define WINCON1_BPPMODE_24BPP_888 (0xb << 2) +#define WINCON1_BPPMODE_24BPP_A1887 (0xc << 2) +#define WINCON1_BPPMODE_25BPP_A1888 (0xd << 2) +#define WINCON1_BPPMODE_28BPP_A4888 (0xd << 2) + + +#define VIDOSDxA_TOPLEFT_X_MASK (0x7ff << 11) +#define VIDOSDxA_TOPLEFT_X_SHIFT (11) +#define VIDOSDxA_TOPLEFT_X_LIMIT (0x7ff) +#define VIDOSDxA_TOPLEFT_X(_x) ((_x) << 11) + +#define VIDOSDxA_TOPLEFT_Y_MASK (0x7ff << 0) +#define VIDOSDxA_TOPLEFT_Y_SHIFT (0) +#define VIDOSDxA_TOPLEFT_Y_LIMIT (0x7ff) +#define VIDOSDxA_TOPLEFT_Y(_x) ((_x) << 0) + +#define VIDOSDxB_BOTRIGHT_X_MASK (0x7ff << 11) +#define VIDOSDxB_BOTRIGHT_X_SHIFT (11) +#define VIDOSDxB_BOTRIGHT_X_LIMIT (0x7ff) +#define VIDOSDxB_BOTRIGHT_X(_x) ((_x) << 11) + +#define VIDOSDxB_BOTRIGHT_Y_MASK (0x7ff << 0) +#define VIDOSDxB_BOTRIGHT_Y_SHIFT (0) +#define VIDOSDxB_BOTRIGHT_Y_LIMIT (0x7ff) +#define VIDOSDxB_BOTRIGHT_Y(_x) ((_x) << 0) + +/* For VIDOSD[1..4]C */ +#define VIDISD14C_ALPHA0_R(_x) ((_x) << 20) +#define VIDISD14C_ALPHA0_G_MASK (0xf << 16) +#define VIDISD14C_ALPHA0_G_SHIFT (16) +#define VIDISD14C_ALPHA0_G_LIMIT (0xf) +#define VIDISD14C_ALPHA0_G(_x) ((_x) << 16) +#define VIDISD14C_ALPHA0_B_MASK (0xf << 12) +#define VIDISD14C_ALPHA0_B_SHIFT (12) +#define VIDISD14C_ALPHA0_B_LIMIT (0xf) +#define VIDISD14C_ALPHA0_B(_x) ((_x) << 12) +#define VIDISD14C_ALPHA1_R_MASK (0xf << 8) +#define VIDISD14C_ALPHA1_R_SHIFT (8) +#define VIDISD14C_ALPHA1_R_LIMIT (0xf) +#define VIDISD14C_ALPHA1_R(_x) ((_x) << 8) +#define VIDISD14C_ALPHA1_G_MASK (0xf << 4) +#define VIDISD14C_ALPHA1_G_SHIFT (4) +#define VIDISD14C_ALPHA1_G_LIMIT (0xf) +#define VIDISD14C_ALPHA1_G(_x) ((_x) << 4) +#define VIDISD14C_ALPHA1_B_MASK (0xf << 0) +#define VIDISD14C_ALPHA1_B_SHIFT (0) +#define VIDISD14C_ALPHA1_B_LIMIT (0xf) +#define VIDISD14C_ALPHA1_B(_x) ((_x) << 0) + +/* Video buffer addresses */ +#define VIDW_BUF_START(_buff) (0xA0 + ((_buff) * 8)) +#define VIDW_BUF_START1(_buff) (0xA4 + ((_buff) * 8)) +#define VIDW_BUF_END(_buff) (0xD0 + ((_buff) * 8)) +#define VIDW_BUF_END1(_buff) (0xD4 + ((_buff) * 8)) +#define VIDW_BUF_SIZE(_buff) (0x100 + ((_buff) * 4)) + +#define VIDW_BUF_SIZE_OFFSET_MASK (0x1fff << 13) +#define VIDW_BUF_SIZE_OFFSET_SHIFT (13) +#define VIDW_BUF_SIZE_OFFSET_LIMIT (0x1fff) +#define VIDW_BUF_SIZE_OFFSET(_x) ((_x) << 13) + +#define VIDW_BUF_SIZE_PAGEWIDTH_MASK (0x1fff << 0) +#define VIDW_BUF_SIZE_PAGEWIDTH_SHIFT (0) +#define VIDW_BUF_SIZE_PAGEWIDTH_LIMIT (0x1fff) +#define VIDW_BUF_SIZE_PAGEWIDTH(_x) ((_x) << 0) + +/* Interrupt controls and status */ + +#define VIDINTCON0_FIFOINTERVAL_MASK (0x3f << 20) +#define VIDINTCON0_FIFOINTERVAL_SHIFT (20) +#define VIDINTCON0_FIFOINTERVAL_LIMIT (0x3f) +#define VIDINTCON0_FIFOINTERVAL(_x) ((_x) << 20) + +#define VIDINTCON0_INT_SYSMAINCON (1 << 19) +#define VIDINTCON0_INT_SYSSUBCON (1 << 18) +#define VIDINTCON0_INT_I80IFDONE (1 << 17) + +#define VIDINTCON0_FRAMESEL0_MASK (0x3 << 15) +#define VIDINTCON0_FRAMESEL0_SHIFT (15) +#define VIDINTCON0_FRAMESEL0_BACKPORCH (0x0 << 15) +#define VIDINTCON0_FRAMESEL0_VSYNC (0x1 << 15) +#define VIDINTCON0_FRAMESEL0_ACTIVE (0x2 << 15) +#define VIDINTCON0_FRAMESEL0_FRONTPORCH (0x3 << 15) + +#define VIDINTCON0_FRAMESEL1 (1 << 14) +#define VIDINTCON0_FRAMESEL1_NONE (0x0 << 14) +#define VIDINTCON0_FRAMESEL1_BACKPORCH (0x1 << 14) +#define VIDINTCON0_FRAMESEL1_VSYNC (0x2 << 14) +#define VIDINTCON0_FRAMESEL1_FRONTPORCH (0x3 << 14) + +#define VIDINTCON0_INT_FRAME (1 << 12) +#define VIDINTCON0_FIFIOSEL_MASK (0x7f << 5) +#define VIDINTCON0_FIFIOSEL_SHIFT (5) +#define VIDINTCON0_FIFIOSEL_WINDOW0 (0x1 << 5) +#define VIDINTCON0_FIFIOSEL_WINDOW1 (0x2 << 5) + +#define VIDINTCON0_FIFOLEVEL_MASK (0x7 << 2) +#define VIDINTCON0_FIFOLEVEL_SHIFT (2) +#define VIDINTCON0_FIFOLEVEL_TO25PC (0x0 << 2) +#define VIDINTCON0_FIFOLEVEL_TO50PC (0x1 << 2) +#define VIDINTCON0_FIFOLEVEL_TO75PC (0x2 << 2) +#define VIDINTCON0_FIFOLEVEL_EMPTY (0x3 << 2) +#define VIDINTCON0_FIFOLEVEL_FULL (0x4 << 2) + +#define VIDINTCON0_INT_FIFO_MASK (0x3 << 0) +#define VIDINTCON0_INT_FIFO_SHIFT (0) +#define VIDINTCON0_INT_ENABLE (1 << 0) + +#define VIDINTCON1 (0x134) +#define VIDINTCON1_INT_I180 (1 << 2) +#define VIDINTCON1_INT_FRAME (1 << 1) +#define VIDINTCON1_INT_FIFO (1 << 0) + +/* Window colour-key control registers */ + +#define WxKEYCON0_KEYBL_EN (1 << 26) +#define WxKEYCON0_KEYEN_F (1 << 25) +#define WxKEYCON0_DIRCON (1 << 24) +#define WxKEYCON0_COMPKEY_MASK (0xffffff << 0) +#define WxKEYCON0_COMPKEY_SHIFT (0) +#define WxKEYCON0_COMPKEY_LIMIT (0xffffff) +#define WxKEYCON0_COMPKEY(_x) ((_x) << 0) +#define WxKEYCON1_COLVAL_MASK (0xffffff << 0) +#define WxKEYCON1_COLVAL_SHIFT (0) +#define WxKEYCON1_COLVAL_LIMIT (0xffffff) +#define WxKEYCON1_COLVAL(_x) ((_x) << 0) + + +/* Window blanking (MAP) */ + +#define WINxMAP_MAP (1 << 24) +#define WINxMAP_MAP_COLOUR_MASK (0xffffff << 0) +#define WINxMAP_MAP_COLOUR_SHIFT (0) +#define WINxMAP_MAP_COLOUR_LIMIT (0xffffff) +#define WINxMAP_MAP_COLOUR(_x) ((_x) << 0) + +#define WPALCON_PAL_UPDATE (1 << 9) +#define WPALCON_W1PAL_MASK (0x7 << 3) +#define WPALCON_W1PAL_SHIFT (3) +#define WPALCON_W1PAL_25BPP_A888 (0x0 << 3) +#define WPALCON_W1PAL_24BPP (0x1 << 3) +#define WPALCON_W1PAL_19BPP_A666 (0x2 << 3) +#define WPALCON_W1PAL_18BPP_A665 (0x3 << 3) +#define WPALCON_W1PAL_18BPP (0x4 << 3) +#define WPALCON_W1PAL_16BPP_A555 (0x5 << 3) +#define WPALCON_W1PAL_16BPP_565 (0x6 << 3) + +#define WPALCON_W0PAL_MASK (0x7 << 0) +#define WPALCON_W0PAL_SHIFT (0) +#define WPALCON_W0PAL_25BPP_A888 (0x0 << 0) +#define WPALCON_W0PAL_24BPP (0x1 << 0) +#define WPALCON_W0PAL_19BPP_A666 (0x2 << 0) +#define WPALCON_W0PAL_18BPP_A665 (0x3 << 0) +#define WPALCON_W0PAL_18BPP (0x4 << 0) +#define WPALCON_W0PAL_16BPP_A555 (0x5 << 0) +#define WPALCON_W0PAL_16BPP_565 (0x6 << 0) + -- cgit v1.2.3 From 12f4b279b53f867e6b0a27135696f33c38597b72 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 19 Nov 2008 15:41:31 +0000 Subject: [ARM] S3C: Add new FB device definition Add a device definition for the new S3C framebuffer driver. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c6400/include/mach/map.h | 2 + arch/arm/plat-s3c/Kconfig | 6 +++ arch/arm/plat-s3c/Makefile | 1 + arch/arm/plat-s3c/dev-fb.c | 72 ++++++++++++++++++++++++++++++++ arch/arm/plat-s3c/include/plat/devs.h | 1 + 5 files changed, 82 insertions(+) create mode 100644 arch/arm/plat-s3c/dev-fb.c (limited to 'arch') diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h index 4d5cd7ee8c1..cff27d813fc 100644 --- a/arch/arm/mach-s3c6400/include/mach/map.h +++ b/arch/arm/mach-s3c6400/include/mach/map.h @@ -38,6 +38,7 @@ #define S3C_VA_UART2 S3C_VA_UARTx(2) #define S3C_VA_UART3 S3C_VA_UARTx(3) +#define S3C64XX_PA_FB (0x77100000) #define S3C64XX_PA_SYSCON (0x7E00F000) #define S3C64XX_PA_TIMER (0x7F006000) #define S3C64XX_PA_IIC0 (0x7F004000) @@ -62,5 +63,6 @@ #define S3C_PA_HSMMC2 S3C64XX_PA_HSMMC2 #define S3C_PA_IIC S3C64XX_PA_IIC0 #define S3C_PA_IIC1 S3C64XX_PA_IIC1 +#define S3C_PA_FB S3C64XX_PA_FB #endif /* __ASM_ARCH_6400_MAP_H */ diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig index d7a6e487f21..e80a32822d8 100644 --- a/arch/arm/plat-s3c/Kconfig +++ b/arch/arm/plat-s3c/Kconfig @@ -166,3 +166,9 @@ config S3C_DEV_I2C1 depends on PLAT_S3C help Compile in platform device definitions for I2C channel 1 + +config S3C_DEV_FB + bool + depends on PLAT_S3C + help + Compile in platform device definition for framebuffer diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile index 3fcee0c44e1..39195f972d5 100644 --- a/arch/arm/plat-s3c/Makefile +++ b/arch/arm/plat-s3c/Makefile @@ -24,3 +24,4 @@ obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o obj-y += dev-i2c0.o obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o +obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o diff --git a/arch/arm/plat-s3c/dev-fb.c b/arch/arm/plat-s3c/dev-fb.c new file mode 100644 index 00000000000..0454b8ec02e --- /dev/null +++ b/arch/arm/plat-s3c/dev-fb.c @@ -0,0 +1,72 @@ +/* linux/arch/arm/plat-s3c/dev-fb.c + * + * Copyright 2008 Simtec Electronics + * Ben Dooks + * http://armlinux.simtec.co.uk/ + * + * S3C series device definition for framebuffer device + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include + +#include +#include + +#include +#include +#include + +static struct resource s3c_fb_resource[] = { + [0] = { + .start = S3C_PA_FB, + .end = S3C_PA_FB + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_LCD_VSYNC, + .end = IRQ_LCD_VSYNC, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_LCD_FIFO, + .end = IRQ_LCD_FIFO, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = IRQ_LCD_SYSTEM, + .end = IRQ_LCD_SYSTEM, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device s3c_device_fb = { + .name = "s3c-fb", + .id = -1, + .num_resources = ARRAY_SIZE(s3c_fb_resource), + .resource = s3c_fb_resource, + .dev.dma_mask = &s3c_device_fb.dev.coherent_dma_mask, + .dev.coherent_dma_mask = 0xffffffffUL, +}; + +void __init s3c_fb_set_platdata(struct s3c_fb_platdata *pd) +{ + struct s3c_fb_platdata *npd; + + if (!pd) { + printk(KERN_ERR "%s: no platform data\n", __func__); + return; + } + + npd = kmemdup(pd, sizeof(struct s3c_fb_platdata), GFP_KERNEL); + if (!npd) + printk(KERN_ERR "%s: no memory for platform data\n", __func__); + + s3c_device_fb.dev.platform_data = npd; +} diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h index 0e342d1fafb..6b1b5231511 100644 --- a/arch/arm/plat-s3c/include/plat/devs.h +++ b/arch/arm/plat-s3c/include/plat/devs.h @@ -24,6 +24,7 @@ extern struct platform_device *s3c24xx_uart_src[]; extern struct platform_device s3c_device_timer[]; +extern struct platform_device s3c_device_fb; extern struct platform_device s3c_device_usb; extern struct platform_device s3c_device_lcd; extern struct platform_device s3c_device_wdt; -- cgit v1.2.3 From a8666e514f8786442ffe4ab19ce34fe9012eb77d Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 19 Nov 2008 15:41:33 +0000 Subject: [ARM] S3C64XX: Add standard S3C64XX 24BPP LCD GPIO setup Add a standard helper to configure the LCD output pins for a 24BPP display with VSYNC/HSYNC/VDEN. Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/Kconfig | 5 +++++ arch/arm/plat-s3c64xx/Makefile | 1 + arch/arm/plat-s3c64xx/setup-fb-24bpp.c | 37 ++++++++++++++++++++++++++++++++++ 3 files changed, 43 insertions(+) create mode 100644 arch/arm/plat-s3c64xx/setup-fb-24bpp.c (limited to 'arch') diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig index 9037eb47076..203dd730d1c 100644 --- a/arch/arm/plat-s3c64xx/Kconfig +++ b/arch/arm/plat-s3c64xx/Kconfig @@ -53,4 +53,9 @@ config S3C64XX_SETUP_I2C1 help Common setup code for i2c bus 1. +config S3C64XX_SETUP_FB_24BPP + bool + help + Common setup code for S3C64XX with an 24bpp RGB display helper. + endif diff --git a/arch/arm/plat-s3c64xx/Makefile b/arch/arm/plat-s3c64xx/Makefile index 0a0b8c48a3e..2e6d79bf8f3 100644 --- a/arch/arm/plat-s3c64xx/Makefile +++ b/arch/arm/plat-s3c64xx/Makefile @@ -28,3 +28,4 @@ obj-$(CONFIG_CPU_S3C6400_CLOCK) += s3c6400-clock.o obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o +obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o diff --git a/arch/arm/plat-s3c64xx/setup-fb-24bpp.c b/arch/arm/plat-s3c64xx/setup-fb-24bpp.c new file mode 100644 index 00000000000..8e28e448dd2 --- /dev/null +++ b/arch/arm/plat-s3c64xx/setup-fb-24bpp.c @@ -0,0 +1,37 @@ +/* linux/arch/arm/plat-s3c64xx/setup-fb-24bpp.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks + * http://armlinux.simtec.co.uk/ + * + * Base S3C64XX setup information for 24bpp LCD framebuffer + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include + +#include +#include +#include +#include + +extern void s3c64xx_fb_gpio_setup_24bpp(void) +{ + unsigned int gpio; + + for (gpio = S3C64XX_GPI(0); gpio <= S3C64XX_GPI(15); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + for (gpio = S3C64XX_GPJ(0); gpio <= S3C64XX_GPJ(11); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } +} -- cgit v1.2.3 From 18aa04d882fe72eb59ea2c9e3f78400d85b6535f Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 19 Nov 2008 15:41:34 +0000 Subject: [ARM] SMDK6410: Add LCD (LCD48WVGA) definitions Add support for the LCD 48WVGA module attached to the SMDK6410. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c6410/Kconfig | 2 + arch/arm/mach-s3c6410/mach-smdk6410.c | 71 +++++++++++++++++++++++++++++++++++ 2 files changed, 73 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig index d00b5605100..1d501007002 100644 --- a/arch/arm/mach-s3c6410/Kconfig +++ b/arch/arm/mach-s3c6410/Kconfig @@ -25,8 +25,10 @@ config MACH_SMDK6410 select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_I2C1 + select S3C_DEV_FB select S3C6410_SETUP_SDHCI select S3C64XX_SETUP_I2C1 + select S3C64XX_SETUP_FB_24BPP help Machine support for the Samsung SMDK6410 diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c index 15c24d00a49..3c4d47145c8 100644 --- a/arch/arm/mach-s3c6410/mach-smdk6410.c +++ b/arch/arm/mach-s3c6410/mach-smdk6410.c @@ -21,12 +21,18 @@ #include #include #include +#include +#include +#include + +#include