From 7d24f0b8a53261709938ffabe3e00f88f6498df9 Mon Sep 17 00:00:00 2001 From: David Gibson Date: Mon, 7 Nov 2005 00:57:52 -0800 Subject: [PATCH] ppc64: Fix bug in SLB miss handler for hugepages This patch, however, should be applied on top of the 64k-page-size patch to fix some problems with hugepage (some pre-existing, another introduced by this patch). The patch fixes a bug in the SLB miss handler for hugepages on ppc64 introduced by the dynamic hugepage patch (commit id c594adad5653491813959277fb87a2fef54c4e05) due to a misunderstanding of the srd instruction's behaviour (mea culpa). The problem arises when a 64-bit process maps some hugepages in the low 4GB of the address space (unusual). In this case, as well as the 256M segment in question being marked for hugepages, other segments at 32G intervals will be incorrectly marked for hugepages. In the process, this patch tweaks the semantics of the hugepage bitmaps to be more sensible. Previously, an address below 4G was marked for hugepages if the appropriate segment bit in the "low areas" bitmask was set *or* if the low bit in the "high areas" bitmap was set (which would mark all addresses below 1TB for hugepage). With this patch, any given address is governed by a single bitmap. Addresses below 4GB are marked for hugepage if and only if their bit is set in the "low areas" bitmap (256M granularity). Addresses between 4GB and 1TB are marked for hugepage iff the low bit in the "high areas" bitmap is set. Higher addresses are marked for hugepage iff their bit in the "high areas" bitmap is set (1TB granularity). To avoid conflicts, this patch must be applied on top of BenH's pending patch for 64k base page size [0]. As such, this patch also addresses a hugepage problem introduced by that patch. That patch allows hugepages of 1MB in size on hardware which supports it, however, that won't work when using 4k pages (4 level pagetable), because in that case hugepage PTEs are stored at the PMD level, and each PMD entry maps 2MB. This patch simply disallows hugepages in that case (we can do something cleverer to re-enable them some other day). Built, booted, and a handful of hugepage related tests passed on POWER5 LPAR (both ARCH=powerpc and ARCH=ppc64). [0] http://gate.crashing.org/~benh/ppc64-64k-pages.diff Signed-off-by: David Gibson Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/mm/hash_utils_64.c | 6 ++++-- arch/powerpc/mm/hugetlbpage.c | 6 ++++++ arch/powerpc/mm/slb_low.S | 13 +++++++++---- 3 files changed, 19 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index b2f3dbca695..f15dfb92dec 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -329,12 +329,14 @@ static void __init htab_init_page_sizes(void) */ if (mmu_psize_defs[MMU_PAGE_16M].shift) mmu_huge_psize = MMU_PAGE_16M; + /* With 4k/4level pagetables, we can't (for now) cope with a + * huge page size < PMD_SIZE */ else if (mmu_psize_defs[MMU_PAGE_1M].shift) mmu_huge_psize = MMU_PAGE_1M; /* Calculate HPAGE_SHIFT and sanity check it */ - if (mmu_psize_defs[mmu_huge_psize].shift > 16 && - mmu_psize_defs[mmu_huge_psize].shift < 28) + if (mmu_psize_defs[mmu_huge_psize].shift > MIN_HUGEPTE_SHIFT && + mmu_psize_defs[mmu_huge_psize].shift < SID_SHIFT) HPAGE_SHIFT = mmu_psize_defs[mmu_huge_psize].shift; else HPAGE_SHIFT = 0; /* No huge pages dude ! */ diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 0073a04047e..426c269e552 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -212,6 +212,12 @@ static int prepare_high_area_for_htlb(struct mm_struct *mm, unsigned long area) BUG_ON(area >= NUM_HIGH_AREAS); + /* Hack, so that each addresses is controlled by exactly one + * of the high or low area bitmaps, the first high area starts + * at 4GB, not 0 */ + if (start == 0) + start = 0x100000000UL; + /* Check no VMAs are in the region */ vma = find_vma(mm, start); if (vma && (vma->vm_start < end)) diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S index 3e18241b6f3..950ffc5848c 100644 --- a/arch/powerpc/mm/slb_low.S +++ b/arch/powerpc/mm/slb_low.S @@ -80,12 +80,17 @@ _GLOBAL(slb_miss_kernel_load_virtual) BEGIN_FTR_SECTION b 1f END_FTR_SECTION_IFCLR(CPU_FTR_16M_PAGE) + cmpldi r10,16 + + lhz r9,PACALOWHTLBAREAS(r13) + mr r11,r10 + blt 5f + lhz r9,PACAHIGHHTLBAREAS(r13) srdi r11,r10,(HTLB_AREA_SHIFT-SID_SHIFT) - srd r9,r9,r11 - lhz r11,PACALOWHTLBAREAS(r13) - srd r11,r11,r10 - or. r9,r9,r11 + +5: srd r9,r9,r11 + andi. r9,r9,1 beq 1f _GLOBAL(slb_miss_user_load_huge) li r11,0 -- cgit v1.2.3 From e1531b4218a7ccfc1b2234b87105201e5ebe1bbf Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 7 Nov 2005 00:57:54 -0800 Subject: [PATCH] ia64: re-implement dma_get_cache_alignment to avoid EXPORT_SYMBOL The current ia64 implementation of dma_get_cache_alignment does not work for modules because it relies on a symbol which is not exported. Direct access to a global is a little ugly anyway, so this patch re-implements dma_get_cache_alignment in a manner similar to what is currently used for x86_64. Signed-off-by: John W. Linville Cc: "Luck, Tony" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ia64/kernel/setup.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index fc56ca2da35..3af6de36a48 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -92,6 +92,13 @@ extern void efi_initialize_iomem_resources(struct resource *, extern char _text[], _end[], _etext[]; unsigned long ia64_max_cacheline_size; + +int dma_get_cache_alignment(void) +{ + return ia64_max_cacheline_size; +} +EXPORT_SYMBOL(dma_get_cache_alignment); + unsigned long ia64_iobase; /* virtual address for I/O accesses */ EXPORT_SYMBOL(ia64_iobase); struct io_space io_space[MAX_IO_SPACES]; -- cgit v1.2.3 From 732ee21f2894819781766a0cd88e32bdd630d11e Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Mon, 7 Nov 2005 00:57:55 -0800 Subject: [PATCH] POWERPC/PPC64: Fix CONFIG_SMP=n build for ppc64 Two CONFIG_SMP=n build fixes due to missing includes. Signed-off-by: Olof Johansson Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/kernel/time.c | 1 + arch/ppc64/kernel/sysfs.c | 1 + 2 files changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 6996a593dcb..b1c89bc4bf9 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -69,6 +69,7 @@ #include #include #endif +#include /* keep track of when we need to update the rtc */ time_t last_rtc_update; diff --git a/arch/ppc64/kernel/sysfs.c b/arch/ppc64/kernel/sysfs.c index 6654b350979..e99ec62c2c5 100644 --- a/arch/ppc64/kernel/sysfs.c +++ b/arch/ppc64/kernel/sysfs.c @@ -20,6 +20,7 @@ #include #include #include +#include static DEFINE_PER_CPU(struct cpu, cpu_devices); -- cgit v1.2.3 From c8e3c8b21bd7a317d071ab8cf478880e7a4f92d6 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 7 Nov 2005 00:57:58 -0800 Subject: [PATCH] ppc64: Fix zImage boot The zImage wrapper has a bug where it doesn't claim() the memory for the kernel properly, it forgets to take into account the offset between the ELF header and the kernel itself. This results on some machines, like G5s, into a kernel that crashes at boot when clearing the BSS. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc64/boot/main.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/ppc64/boot/main.c b/arch/ppc64/boot/main.c index c1dc876bcca..e0dde24a72c 100644 --- a/arch/ppc64/boot/main.c +++ b/arch/ppc64/boot/main.c @@ -203,8 +203,15 @@ void start(unsigned long a1, unsigned long a2, void *promptr, void *sp) if (elf64ph->p_type == PT_LOAD && elf64ph->p_offset != 0) break; } - vmlinux.size = (unsigned long)elf64ph->p_filesz; - vmlinux.memsize = (unsigned long)elf64ph->p_memsz; + vmlinux.size = (unsigned long)elf64ph->p_filesz + + (unsigned long)elf64ph->p_offset; + /* We need to claim the memsize plus the file offset since gzip + * will expand the header (file offset), then the kernel, then + * possible rubbish we don't care about. But the kernel bss must + * be claimed (it will be zero'd by the kernel itself) + */ + vmlinux.memsize = (unsigned long)elf64ph->p_memsz + + (unsigned long)elf64ph->p_offset; printf("Allocating 0x%lx bytes for kernel ...\n\r", vmlinux.memsize); vmlinux.addr = try_claim(vmlinux.memsize); if (vmlinux.addr == 0) { -- cgit v1.2.3 From 863c84b97cb660dbb949398e196c0b1bbe4ed39f Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 7 Nov 2005 00:57:58 -0800 Subject: [PATCH] ppc: Fix ppc32 build after 64K pages Oops, some last minute changes caused the 64K pages patch to break ppc32 build, this fixes it. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/Kconfig | 1 + arch/powerpc/mm/ppc_mmu_32.c | 4 ++-- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index ca7acb0c79f..55ce4957052 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -605,6 +605,7 @@ config NODES_SPAN_OTHER_NODES config PPC_64K_PAGES bool "64k page size" + depends on PPC64 help This option changes the kernel logical page size to 64k. On machines without processor support for 64k pages, the kernel will simulate diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c index d137abd241f..ed7fcfe5fd3 100644 --- a/arch/powerpc/mm/ppc_mmu_32.c +++ b/arch/powerpc/mm/ppc_mmu_32.c @@ -188,9 +188,9 @@ void hash_preload(struct mm_struct *mm, unsigned long ea, if (Hash == 0) return; - pmd = pmd_offset(pgd_offset(vma->vm_mm, address), address); + pmd = pmd_offset(pgd_offset(mm, ea), ea); if (!pmd_none(*pmd)) - add_hash_page(vma->vm_mm->context, address, pmd_val(*pmd)); + add_hash_page(mm->context, ea, pmd_val(*pmd)); } /* -- cgit v1.2.3 From 2104da90a9aeef31ff6441d171a7d0492088f1d0 Mon Sep 17 00:00:00 2001 From: Lee Nicks Date: Mon, 7 Nov 2005 00:58:10 -0800 Subject: [PATCH] ppc32: add watchdog & RTC support for Marvell EV64360BP board This patch adds watchdog, RTC support for Marvell EV64360BP board. Signed-off-by: Lee Nicks Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/configs/ev64360_defconfig | 73 +++++++++++++++++++++++++++----------- arch/ppc/platforms/ev64360.c | 12 +++++++ arch/ppc/syslib/Makefile | 1 + 3 files changed, 66 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/ppc/configs/ev64360_defconfig b/arch/ppc/configs/ev64360_defconfig index de9bbb791db..d471e578dcb 100644 --- a/arch/ppc/configs/ev64360_defconfig +++ b/arch/ppc/configs/ev64360_defconfig @@ -1,17 +1,17 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc5 -# Fri Aug 5 15:18:23 2005 +# Linux kernel version: 2.6.14 +# Fri Oct 28 19:15:34 2005 # CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_HAVE_DEC_LOCK=y CONFIG_PPC=y CONFIG_PPC32=y CONFIG_GENERIC_NVRAM=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y # # Code maturity level options @@ -26,6 +26,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y @@ -35,6 +36,7 @@ CONFIG_SYSCTL=y CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -74,7 +76,7 @@ CONFIG_TAU=y # CONFIG_TAU_AVERAGE is not set # CONFIG_KEXEC is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PM is not set +# CONFIG_WANT_EARLY_SERIAL is not set CONFIG_PPC_STD_MMU=y CONFIG_NOT_COHERENT_CACHE=y @@ -86,22 +88,18 @@ CONFIG_NOT_COHERENT_CACHE=y # CONFIG_KATANA is not set # CONFIG_WILLOW is not set # CONFIG_CPCI690 is not set -# CONFIG_PCORE is not set # CONFIG_POWERPMC250 is not set # CONFIG_CHESTNUT is not set # CONFIG_SPRUCE is not set # CONFIG_HDPU is not set # CONFIG_EV64260 is not set # CONFIG_LOPEC is not set -# CONFIG_MCPN765 is not set # CONFIG_MVME5100 is not set # CONFIG_PPLUS is not set # CONFIG_PRPMC750 is not set # CONFIG_PRPMC800 is not set # CONFIG_SANDPOINT is not set # CONFIG_RADSTONE_PPC7D is not set -# CONFIG_ADIR is not set -# CONFIG_K2 is not set # CONFIG_PAL4 is not set # CONFIG_GEMINI is not set # CONFIG_EST8260 is not set @@ -138,10 +136,13 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyMM0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2" +# CONFIG_PM is not set +# CONFIG_SOFTWARE_SUSPEND is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -152,7 +153,6 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCI_LEGACY_PROC is not set -# CONFIG_PCI_NAMES is not set # # PCCARD (PCMCIA/CardBus) support @@ -206,13 +206,18 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + # # SCTP Configuration (EXPERIMENTAL) # @@ -239,6 +244,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -251,6 +257,11 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + # # Memory Technology Devices (MTD) # @@ -358,7 +369,6 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set @@ -379,6 +389,7 @@ CONFIG_IOSCHED_CFQ=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # @@ -419,6 +430,10 @@ CONFIG_NETDEVICES=y # # CONFIG_ARCNET is not set +# +# PHY device support +# + # # Ethernet (10 or 100Mbit) # @@ -434,6 +449,7 @@ CONFIG_NETDEVICES=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set @@ -446,6 +462,7 @@ CONFIG_MV643XX_ETH_0=y # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -547,7 +564,20 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Watchdog Cards # -# CONFIG_WATCHDOG is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_MV64X60_WDT=y + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -571,7 +601,6 @@ CONFIG_GEN_RTC=y # I2C support # # CONFIG_I2C is not set -# CONFIG_I2C_SENSOR is not set # # Dallas's 1-wire bus @@ -582,12 +611,17 @@ CONFIG_GEN_RTC=y # Hardware Monitoring support # CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set # CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices # +# +# Multimedia Capabilities Port drivers +# + # # Multimedia devices # @@ -651,10 +685,6 @@ CONFIG_EXT2_FS=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set - -# -# XFS support -# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -663,6 +693,7 @@ CONFIG_INOTIFY=y CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -683,11 +714,10 @@ CONFIG_DNOTIFY=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -735,6 +765,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -751,6 +782,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y @@ -767,6 +799,7 @@ CONFIG_ZLIB_DEFLATE=y # CONFIG_PRINTK_TIME is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_SERIAL_TEXT_DEBUG is not set # # Security options diff --git a/arch/ppc/platforms/ev64360.c b/arch/ppc/platforms/ev64360.c index b1324564456..b9d844f88c2 100644 --- a/arch/ppc/platforms/ev64360.c +++ b/arch/ppc/platforms/ev64360.c @@ -52,6 +52,8 @@ static u32 ev64360_bus_frequency; unsigned char __res[sizeof(bd_t)]; +TODC_ALLOC(); + static int __init ev64360_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) { @@ -182,6 +184,9 @@ ev64360_setup_peripherals(void) EV64360_RTC_WINDOW_BASE, EV64360_RTC_WINDOW_SIZE, 0); bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN); + TODC_INIT(TODC_TYPE_DS1501, 0, 0, + ioremap(EV64360_RTC_WINDOW_BASE, EV64360_RTC_WINDOW_SIZE), 8); + mv64x60_set_32bit_window(&bh, MV64x60_CPU2SRAM_WIN, EV64360_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE, 0); bh.ci->enable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN); @@ -496,6 +501,13 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, ppc_md.power_off = ev64360_power_off; ppc_md.halt = ev64360_halt; ppc_md.find_end_of_memory = ev64360_find_end_of_memory; + ppc_md.init = NULL; + + ppc_md.time_init = todc_time_init; + ppc_md.set_rtc_time = todc_set_rtc_time; + ppc_md.get_rtc_time = todc_get_rtc_time; + ppc_md.nvram_read_val = todc_direct_read_val; + ppc_md.nvram_write_val = todc_direct_write_val; ppc_md.calibrate_decr = ev64360_calibrate_decr; #if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE) diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index b4ef15b45c4..2e58c210522 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -46,6 +46,7 @@ obj-$(CONFIG_BAMBOO) += pci_auto.o todc_time.o obj-$(CONFIG_CPCI690) += todc_time.o pci_auto.o obj-$(CONFIG_EBONY) += pci_auto.o todc_time.o obj-$(CONFIG_EV64260) += todc_time.o pci_auto.o +obj-$(CONFIG_EV64360) += todc_time.o obj-$(CONFIG_CHESTNUT) += mv64360_pic.o pci_auto.o obj-$(CONFIG_GEMINI) += open_pic.o obj-$(CONFIG_GT64260) += gt64260_pic.o -- cgit v1.2.3 From fcc188e7fdddd8b23f900e485e6b3db05e7375f4 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 7 Nov 2005 00:58:11 -0800 Subject: [PATCH] ppc32: Allow ERPN for early serial to depend on CPU type The PowerPC 440SPe supports up to 16 GB of RAM, and therefore its IO registers are at 0x4_xxxx_xxxx instead of being at 0x1_xxxx_xxxx like most other PPC 440 chips. To allow for this, this patch moves the definition of the ERPN used for mapping UART0 from being hard-coded in the head_44x.S assembly code to being defined in ibm44x.h. Signed-off-by: Roland Dreier Signed-off-by: Matt Porter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/kernel/head_44x.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/ppc/kernel/head_44x.S b/arch/ppc/kernel/head_44x.S index 8b49679fad5..677c571aa27 100644 --- a/arch/ppc/kernel/head_44x.S +++ b/arch/ppc/kernel/head_44x.S @@ -190,8 +190,8 @@ skpinv: addi r4,r4,1 /* Increment */ /* xlat fields */ lis r4,UART0_PHYS_IO_BASE@h /* RPN depends on SoC */ -#ifndef CONFIG_440EP - ori r4,r4,0x0001 /* ERPN is 1 for second 4GB page */ +#ifdef UART0_PHYS_ERPN + ori r4,r4,UART0_PHYS_ERPN /* Add ERPN if above 4GB */ #endif /* attrib fields */ -- cgit v1.2.3 From 41aace4fe81e3da52fa80b8380e5d2d084f77691 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 7 Nov 2005 00:58:12 -0800 Subject: [PATCH] ppc32: Dump error status for both PLB segments on 440SP The PowerPC 440SP SoC has two Processor Local Bus (PLB) segments (a high-throughput segment and a low-latency segment). Fix our PLB register definitions to cope with this, and add code to dump the status of both segments when a machine check occurs. Signed-off-by: Roland Dreier Cc: Matt Porter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/syslib/ibm44x_common.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/ppc/syslib/ibm44x_common.c b/arch/ppc/syslib/ibm44x_common.c index 5152c8e4134..ebae2e2fcea 100644 --- a/arch/ppc/syslib/ibm44x_common.c +++ b/arch/ppc/syslib/ibm44x_common.c @@ -214,9 +214,20 @@ void __init ibm44x_platform_init(unsigned long r3, unsigned long r4, unsigned lo /* Called from machine_check_exception */ void platform_machine_check(struct pt_regs *regs) { +#ifdef CONFIG_440SP + printk("PLB0: BEAR=0x%08x%08x ACR= 0x%08x BESR= 0x%08x%08x\n", + mfdcr(DCRN_PLB0_BEARH), mfdcr(DCRN_PLB0_BEARL), + mfdcr(DCRN_PLB0_ACR), mfdcr(DCRN_PLB0_BESRH), + mfdcr(DCRN_PLB0_BESRL)); + printk("PLB1: BEAR=0x%08x%08x ACR= 0x%08x BESR= 0x%08x%08x\n", + mfdcr(DCRN_PLB1_BEARH), mfdcr(DCRN_PLB1_BEARL), + mfdcr(DCRN_PLB1_ACR), mfdcr(DCRN_PLB1_BESRH), + mfdcr(DCRN_PLB1_BESRL)); +#else printk("PLB0: BEAR=0x%08x%08x ACR= 0x%08x BESR= 0x%08x\n", mfdcr(DCRN_PLB0_BEARH), mfdcr(DCRN_PLB0_BEARL), mfdcr(DCRN_PLB0_ACR), mfdcr(DCRN_PLB0_BESR)); +#endif printk("POB0: BEAR=0x%08x%08x BESR0=0x%08x BESR1=0x%08x\n", mfdcr(DCRN_POB0_BEARH), mfdcr(DCRN_POB0_BEARL), mfdcr(DCRN_POB0_BESR0), mfdcr(DCRN_POB0_BESR1)); -- cgit v1.2.3 From b0f7b8bc57ee90138a7c429951457027a90c326f Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 7 Nov 2005 00:58:13 -0800 Subject: [PATCH] ppc32: Add 440SPe support Add support for the AMCC PowerPC 440SPe SoC, including PCI Express in root port mode. Signed-off-by: Roland Dreier Cc: Matt Porter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/kernel/cputable.c | 10 + arch/ppc/platforms/4xx/Kconfig | 8 +- arch/ppc/platforms/4xx/Makefile | 1 + arch/ppc/platforms/4xx/ppc440spe.c | 148 +++++++++++++ arch/ppc/platforms/4xx/ppc440spe.h | 66 ++++++ arch/ppc/syslib/Makefile | 1 + arch/ppc/syslib/ibm440sp_common.c | 4 +- arch/ppc/syslib/ibm44x_common.c | 2 +- arch/ppc/syslib/ppc440spe_pcie.c | 442 +++++++++++++++++++++++++++++++++++++ arch/ppc/syslib/ppc440spe_pcie.h | 149 +++++++++++++ arch/ppc/syslib/ppc4xx_pic.c | 37 +++- 11 files changed, 862 insertions(+), 6 deletions(-) create mode 100644 arch/ppc/platforms/4xx/ppc440spe.c create mode 100644 arch/ppc/platforms/4xx/ppc440spe.h create mode 100644 arch/ppc/syslib/ppc440spe_pcie.c create mode 100644 arch/ppc/syslib/ppc440spe_pcie.h (limited to 'arch') diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 33c63bcf69f..cc4e9eb1c13 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -929,6 +929,16 @@ struct cpu_spec cpu_specs[] = { .icache_bsize = 32, .dcache_bsize = 32, }, + { /* 440SPe Rev. A */ + .pvr_mask = 0xff000fff, + .pvr_value = 0x53000890, + .cpu_name = "440SPe Rev. A", + .cpu_features = CPU_FTR_SPLIT_ID_CACHE | + CPU_FTR_USE_TB, + .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU, + .icache_bsize = 32, + .dcache_bsize = 32, + }, #endif /* CONFIG_44x */ #ifdef CONFIG_FSL_BOOKE { /* e200z5 */ diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig index 76f4476cab4..108d5a730f8 100644 --- a/arch/ppc/platforms/4xx/Kconfig +++ b/arch/ppc/platforms/4xx/Kconfig @@ -124,9 +124,13 @@ config 440SP depends on LUAN default y +config 440SPE + bool + default n + config 440 bool - depends on 440GP || 440SP || 440EP + depends on 440GP || 440SP || 440SPE || 440EP default y config 440A @@ -168,7 +172,7 @@ config XILINX_OCP config IBM_EMAC4 bool - depends on 440GX || 440SP + depends on 440GX || 440SP || 440SPE default y config BIOS_FIXUP diff --git a/arch/ppc/platforms/4xx/Makefile b/arch/ppc/platforms/4xx/Makefile index 1dd6d7fd6a9..694accdb59f 100644 --- a/arch/ppc/platforms/4xx/Makefile +++ b/arch/ppc/platforms/4xx/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_440EP) += ibm440ep.o obj-$(CONFIG_440GP) += ibm440gp.o obj-$(CONFIG_440GX) += ibm440gx.o obj-$(CONFIG_440SP) += ibm440sp.o +obj-$(CONFIG_440SPE) += ppc440spe.o obj-$(CONFIG_405EP) += ibm405ep.o obj-$(CONFIG_405GPR) += ibm405gpr.o obj-$(CONFIG_VIRTEX_II_PRO) += virtex-ii_pro.o diff --git a/arch/ppc/platforms/4xx/ppc440spe.c b/arch/ppc/platforms/4xx/ppc440spe.c new file mode 100644 index 00000000000..6139a0b3393 --- /dev/null +++ b/arch/ppc/platforms/4xx/ppc440spe.c @@ -0,0 +1,148 @@ +/* + * arch/ppc/platforms/4xx/ppc440spe.c + * + * PPC440SPe I/O descriptions + * + * Roland Dreier + * Copyright (c) 2005 Cisco Systems. All rights reserved. + * + * Matt Porter + * Copyright 2002-2005 MontaVista Software Inc. + * + * Eugene Surovegin or + * Copyright (c) 2003, 2004 Zultys Technologies + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include +#include +#include +#include +#include + +static struct ocp_func_emac_data ppc440spe_emac0_def = { + .rgmii_idx = -1, /* No RGMII */ + .rgmii_mux = -1, /* No RGMII */ + .zmii_idx = -1, /* No ZMII */ + .zmii_mux = -1, /* No ZMII */ + .mal_idx = 0, /* MAL device index */ + .mal_rx_chan = 0, /* MAL rx channel number */ + .mal_tx_chan = 0, /* MAL tx channel number */ + .wol_irq = 61, /* WOL interrupt number */ + .mdio_idx = -1, /* No shared MDIO */ + .tah_idx = -1, /* No TAH */ +}; +OCP_SYSFS_EMAC_DATA() + +static struct ocp_func_mal_data ppc440spe_mal0_def = { + .num_tx_chans = 1, /* Number of TX channels */ + .num_rx_chans = 1, /* Number of RX channels */ + .txeob_irq = 38, /* TX End Of Buffer IRQ */ + .rxeob_irq = 39, /* RX End Of Buffer IRQ */ + .txde_irq = 34, /* TX Descriptor Error IRQ */ + .rxde_irq = 35, /* RX Descriptor Error IRQ */ + .serr_irq = 33, /* MAL System Error IRQ */ + .dcr_base = DCRN_MAL_BASE /* MAL0_CFG DCR number */ +}; +OCP_SYSFS_MAL_DATA() + +static struct ocp_func_iic_data ppc440spe_iic0_def = { + .fast_mode = 0, /* Use standad mode (100Khz) */ +}; + +static struct ocp_func_iic_data ppc440spe_iic1_def = { + .fast_mode = 0, /* Use standad mode (100Khz) */ +}; +OCP_SYSFS_IIC_DATA() + +struct ocp_def core_ocp[] = { + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_16550, + .index = 0, + .paddr = PPC440SPE_UART0_ADDR, + .irq = UART0_INT, + .pm = IBM_CPM_UART0, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_16550, + .index = 1, + .paddr = PPC440SPE_UART1_ADDR, + .irq = UART1_INT, + .pm = IBM_CPM_UART1, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_16550, + .index = 2, + .paddr = PPC440SPE_UART2_ADDR, + .irq = UART2_INT, + .pm = IBM_CPM_UART2, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_IIC, + .index = 0, + .paddr = 0x00000004f0000400ULL, + .irq = 2, + .pm = IBM_CPM_IIC0, + .additions = &ppc440spe_iic0_def, + .show = &ocp_show_iic_data + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_IIC, + .index = 1, + .paddr = 0x00000004f0000500ULL, + .irq = 3, + .pm = IBM_CPM_IIC1, + .additions = &ppc440spe_iic1_def, + .show = &ocp_show_iic_data + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_GPIO, + .index = 0, + .paddr = 0x00000004f0000700ULL, + .irq = OCP_IRQ_NA, + .pm = IBM_CPM_GPIO0, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_MAL, + .paddr = OCP_PADDR_NA, + .irq = OCP_IRQ_NA, + .pm = OCP_CPM_NA, + .additions = &ppc440spe_mal0_def, + .show = &ocp_show_mal_data, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_EMAC, + .index = 0, + .paddr = 0x00000004f0000800ULL, + .irq = 60, + .pm = OCP_CPM_NA, + .additions = &ppc440spe_emac0_def, + .show = &ocp_show_emac_data, + }, + { .vendor = OCP_VENDOR_INVALID + } +}; + +/* Polarity and triggering settings for internal interrupt sources */ +struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = { + { .polarity = 0xffffffff, + .triggering = 0x010f0004, + .ext_irq_mask = 0x00000000, + }, + { .polarity = 0xffffffff, + .triggering = 0x001f8040, + .ext_irq_mask = 0x00007c30, /* IRQ6 - IRQ7, IRQ8 - IRQ12 */ + }, + { .polarity = 0xffffffff, + .triggering = 0x00000000, + .ext_irq_mask = 0x000000fc, /* IRQ0 - IRQ5 */ + }, + { .polarity = 0xffffffff, + .triggering = 0x00000000, + .ext_irq_mask = 0x00000000, + }, +}; diff --git a/arch/ppc/platforms/4xx/ppc440spe.h b/arch/ppc/platforms/4xx/ppc440spe.h new file mode 100644 index 00000000000..2216846973b --- /dev/null +++ b/arch/ppc/platforms/4xx/ppc440spe.h @@ -0,0 +1,66 @@ +/* + * arch/ppc/platforms/4xx/ibm440spe.h + * + * PPC440SPe definitions + * + * Roland Dreier + * Copyright (c) 2005 Cisco Systems. All rights reserved. + * + * Matt Porter + * Copyright 2004-2005 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifdef __KERNEL__ +#ifndef __PPC_PLATFORMS_PPC440SPE_H +#define __PPC_PLATFORMS_PPC440SPE_H + +#include + +#include + +/* UART */ +#define PPC440SPE_UART0_ADDR 0x00000004f0000200ULL +#define PPC440SPE_UART1_ADDR 0x00000004f0000300ULL +#define PPC440SPE_UART2_ADDR 0x00000004f0000600ULL +#define UART0_INT 0 +#define UART1_INT 1 +#define UART2_INT 37 + +/* Clock and Power Management */ +#define IBM_CPM_IIC0 0x80000000 /* IIC interface */ +#define IBM_CPM_IIC1 0x40000000 /* IIC interface */ +#define IBM_CPM_PCI 0x20000000 /* PCI bridge */ +#define IBM_CPM_CPU 0x02000000 /* processor core */ +#define IBM_CPM_DMA 0x01000000 /* DMA controller */ +#define IBM_CPM_BGO 0x00800000 /* PLB to OPB bus arbiter */ +#define IBM_CPM_BGI 0x00400000 /* OPB to PLB bridge */ +#define IBM_CPM_EBC 0x00200000 /* External Bux Controller */ +#define IBM_CPM_EBM 0x00100000 /* Ext Bus Master Interface */ +#define IBM_CPM_DMC 0x00080000 /* SDRAM peripheral controller */ +#define IBM_CPM_PLB 0x00040000 /* PLB bus arbiter */ +#define IBM_CPM_SRAM 0x00020000 /* SRAM memory controller */ +#define IBM_CPM_PPM 0x00002000 /* PLB Performance Monitor */ +#define IBM_CPM_UIC1 0x00001000 /* Universal Interrupt Controller */ +#define IBM_CPM_GPIO0 0x00000800 /* General Purpose IO (??) */ +#define IBM_CPM_GPT 0x00000400 /* General Purpose Timers */ +#define IBM_CPM_UART0 0x00000200 /* serial port 0 */ +#define IBM_CPM_UART1 0x00000100 /* serial port 1 */ +#define IBM_CPM_UART2 0x00000100 /* serial port 1 */ +#define IBM_CPM_UIC0 0x00000080 /* Universal Interrupt Controller */ +#define IBM_CPM_TMRCLK 0x00000040 /* CPU timers */ +#define IBM_CPM_EMAC0 0x00000020 /* EMAC 0 */ + +#define DFLT_IBM4xx_PM ~(IBM_CPM_UIC | IBM_CPM_UIC1 | IBM_CPM_CPU \ + | IBM_CPM_EBC | IBM_CPM_SRAM | IBM_CPM_BGO \ + | IBM_CPM_EBM | IBM_CPM_PLB | IBM_CPM_OPB \ + | IBM_CPM_TMRCLK | IBM_CPM_DMA | IBM_CPM_PCI \ + | IBM_CPM_TAHOE0 | IBM_CPM_TAHOE1 \ + | IBM_CPM_EMAC0 | IBM_CPM_EMAC1 \ + | IBM_CPM_EMAC2 | IBM_CPM_EMAC3 ) +#endif /* __PPC_PLATFORMS_PPC440SP_H */ +#endif /* __KERNEL__ */ diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index 2e58c210522..13dff1e51f1 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_440EP) += ibm440gx_common.o obj-$(CONFIG_440GP) += ibm440gp_common.o obj-$(CONFIG_440GX) += ibm440gx_common.o obj-$(CONFIG_440SP) += ibm440gx_common.o ibm440sp_common.o +obj-$(CONFIG_440SPE) += ibm440gx_common.o ibm440sp_common.o ppc440spe_pcie.o ifeq ($(CONFIG_4xx),y) ifeq ($(CONFIG_VIRTEX_II_PRO),y) obj-$(CONFIG_40x) += xilinx_pic.o diff --git a/arch/ppc/syslib/ibm440sp_common.c b/arch/ppc/syslib/ibm440sp_common.c index 417d4cff77a..cdafda127d8 100644 --- a/arch/ppc/syslib/ibm440sp_common.c +++ b/arch/ppc/syslib/ibm440sp_common.c @@ -1,7 +1,7 @@ /* * arch/ppc/syslib/ibm440sp_common.c * - * PPC440SP system library + * PPC440SP/PPC440SPe system library * * Matt Porter * Copyright 2002-2005 MontaVista Software Inc. @@ -35,7 +35,7 @@ unsigned long __init ibm440sp_find_end_of_memory(void) u32 mem_size = 0; /* Read two bank sizes and sum */ - for (i=0; i<2; i++) + for (i=0; i< MQ0_NUM_BANKS; i++) switch (mfdcr(DCRN_MQ0_BS0BAS + i) & MQ0_CONFIG_SIZE_MASK) { case MQ0_CONFIG_SIZE_8M: mem_size += PPC44x_MEM_SIZE_8M; diff --git a/arch/ppc/syslib/ibm44x_common.c b/arch/ppc/syslib/ibm44x_common.c index ebae2e2fcea..a5bef9d163a 100644 --- a/arch/ppc/syslib/ibm44x_common.c +++ b/arch/ppc/syslib/ibm44x_common.c @@ -214,7 +214,7 @@ void __init ibm44x_platform_init(unsigned long r3, unsigned long r4, unsigned lo /* Called from machine_check_exception */ void platform_machine_check(struct pt_regs *regs) { -#ifdef CONFIG_440SP +#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) printk("PLB0: BEAR=0x%08x%08x ACR= 0x%08x BESR= 0x%08x%08x\n", mfdcr(DCRN_PLB0_BEARH), mfdcr(DCRN_PLB0_BEARL), mfdcr(DCRN_PLB0_ACR), mfdcr(DCRN_PLB0_BESRH), diff --git a/arch/ppc/syslib/ppc440spe_pcie.c b/arch/ppc/syslib/ppc440spe_pcie.c new file mode 100644 index 00000000000..1509fc1ddfb --- /dev/null +++ b/arch/ppc/syslib/ppc440spe_pcie.c @@ -0,0 +1,442 @@ +/* + * Copyright (c) 2005 Cisco Systems. All rights reserved. + * Roland Dreier + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "ppc440spe_pcie.h" + +static int +pcie_read_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 *val) +{ + struct pci_controller *hose = bus->sysdata; + + if (PCI_SLOT(devfn) != 1) + return PCIBIOS_DEVICE_NOT_FOUND; + + offset += devfn << 12; + + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + *val = in_8(hose->cfg_data + offset); + break; + case 2: + *val = in_le16(hose->cfg_data + offset); + break; + default: + *val = in_le32(hose->cfg_data + offset); + break; + } + + if (0) printk("%s: read %x(%d) @ %x\n", __func__, *val, len, offset); + + return PCIBIOS_SUCCESSFUL; +} + +static int +pcie_write_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 val) +{ + struct pci_controller *hose = bus->sysdata; + + if (PCI_SLOT(devfn) != 1) + return PCIBIOS_DEVICE_NOT_FOUND; + + offset += devfn << 12; + + switch (len) { + case 1: + out_8(hose->cfg_data + offset, val); + break; + case 2: + out_le16(hose->cfg_data + offset, val); + break; + default: + out_le32(hose->cfg_data + offset, val); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops pcie_pci_ops = +{ + .read = pcie_read_config, + .write = pcie_write_config +}; + +enum { + PTYPE_ENDPOINT = 0x0, + PTYPE_LEGACY_ENDPOINT = 0x1, + PTYPE_ROOT_PORT = 0x4, + + LNKW_X1 = 0x1, + LNKW_X4 = 0x4, + LNKW_X8 = 0x8 +}; + +static void check_error(void) +{ + u32 valPE0, valPE1, valPE2; + + /* SDR0_PEGPLLLCT1 reset */ + if (!(valPE0 = SDR_READ(PESDR0_PLLLCT1) & 0x01000000)) { + printk(KERN_INFO "PCIE: SDR0_PEGPLLLCT1 reset error 0x%8x\n", valPE0); + } + + valPE0 = SDR_READ(PESDR0_RCSSET); + valPE1 = SDR_READ(PESDR1_RCSSET); + valPE2 = SDR_READ(PESDR2_RCSSET); + + /* SDR0_PExRCSSET rstgu */ + if ( !(valPE0 & 0x01000000) || + !(valPE1 & 0x01000000) || + !(valPE2 & 0x01000000)) { + printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstgu error\n"); + } + + /* SDR0_PExRCSSET rstdl */ + if ( !(valPE0 & 0x00010000) || + !(valPE1 & 0x00010000) || + !(valPE2 & 0x00010000)) { + printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstdl error\n"); + } + + /* SDR0_PExRCSSET rstpyn */ + if ( (valPE0 & 0x00001000) || + (valPE1 & 0x00001000) || + (valPE2 & 0x00001000)) { + printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstpyn error\n"); + } + + /* SDR0_PExRCSSET hldplb */ + if ( (valPE0 & 0x10000000) || + (valPE1 & 0x10000000) || + (valPE2 & 0x10000000)) { + printk(KERN_INFO "PCIE: SDR0_PExRCSSET hldplb error\n"); + } + + /* SDR0_PExRCSSET rdy */ + if ( (valPE0 & 0x00100000) || + (valPE1 & 0x00100000) || + (valPE2 & 0x00100000)) { + printk(KERN_INFO "PCIE: SDR0_PExRCSSET rdy error\n"); + } + + /* SDR0_PExRCSSET shutdown */ + if ( (valPE0 & 0x00000100) || + (valPE1 & 0x00000100) || + (valPE2 & 0x00000100)) { + printk(KERN_INFO "PCIE: SDR0_PExRCSSET shutdown error\n"); + } +} + +/* + * Initialize PCI Express core as described in User Manual section 27.12.1 + */ +int ppc440spe_init_pcie(void) +{ + /* Set PLL clock receiver to LVPECL */ + SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) | 1 << 28); + + check_error(); + + printk(KERN_INFO "PCIE initialization OK\n"); + + if (!(SDR_READ(PESDR0_PLLLCT2) & 0x10000)) + printk(KERN_INFO "PESDR_PLLCT2 resistance calibration failed (0x%08x)\n", + SDR_READ(PESDR0_PLLLCT2)); + + /* De-assert reset of PCIe PLL, wait for lock */ + SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) & ~(1 << 24)); + udelay(3); + + return 0; +} + +int ppc440spe_init_pcie_rootport(int port) +{ + static int core_init; + void __iomem *utl_base; + u32 val = 0; + int i; + + if (!core_init) { + ++core_init; + i = ppc440spe_init_pcie(); + if (i) + return i; + } + + /* + * Initialize various parts of the PCI Express core for our port: + * + * - Set as a root port and enable max width + * (PXIE0 -> X8, PCIE1 and PCIE2 -> X4). + * - Set up UTL configuration. + * - Increase SERDES drive strength to levels suggested by AMCC. + * - De-assert RSTPYN, RSTDL and RSTGU. + */ + switch (port) { + case 0: + SDR_WRITE(PESDR0_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X8 << 12); + + SDR_WRITE(PESDR0_UTLSET1, 0x21222222); + SDR_WRITE(PESDR0_UTLSET2, 0x11000000); + + SDR_WRITE(PESDR0_HSSL0SET1, 0x35000000); + SDR_WRITE(PESDR0_HSSL1SET1, 0x35000000); + SDR_WRITE(PESDR0_HSSL2SET1, 0x35000000); + SDR_WRITE(PESDR0_HSSL3SET1, 0x35000000); + SDR_WRITE(PESDR0_HSSL4SET1, 0x35000000); + SDR_WRITE(PESDR0_HSSL5SET1, 0x35000000); + SDR_WRITE(PESDR0_HSSL6SET1, 0x35000000); + SDR_WRITE(PESDR0_HSSL7SET1, 0x35000000); + + SDR_WRITE(PESDR0_RCSSET, + (SDR_READ(PESDR0_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12); + break; + + case 1: + SDR_WRITE(PESDR1_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X4 << 12); + + SDR_WRITE(PESDR1_UTLSET1, 0x21222222); + SDR_WRITE(PESDR1_UTLSET2, 0x11000000); + + SDR_WRITE(PESDR1_HSSL0SET1, 0x35000000); + SDR_WRITE(PESDR1_HSSL1SET1, 0x35000000); + SDR_WRITE(PESDR1_HSSL2SET1, 0x35000000); + SDR_WRITE(PESDR1_HSSL3SET1, 0x35000000); + + SDR_WRITE(PESDR1_RCSSET, + (SDR_READ(PESDR1_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12); + break; + + case 2: + SDR_WRITE(PESDR2_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X4 << 12); + + SDR_WRITE(PESDR2_UTLSET1, 0x21222222); + SDR_WRITE(PESDR2_UTLSET2, 0x11000000); + + SDR_WRITE(PESDR2_HSSL0SET1, 0x35000000); + SDR_WRITE(PESDR2_HSSL1SET1, 0x35000000); + SDR_WRITE(PESDR2_HSSL2SET1, 0x35000000); + SDR_WRITE(PESDR2_HSSL3SET1, 0x35000000); + + SDR_WRITE(PESDR2_RCSSET, + (SDR_READ(PESDR2_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12); + break; + } + + mdelay(1000); + + switch (port) { + case 0: val = SDR_READ(PESDR0_RCSSTS); break; + case 1: val = SDR_READ(PESDR1_RCSSTS); break; + case 2: val = SDR_READ(PESDR2_RCSSTS); break; + } + + if (!(val & (1 << 20))) + printk(KERN_INFO "PCIE%d: PGRST inactive\n", port); + else + printk(KERN_WARNING "PGRST for PCIE%d failed %08x\n", port, val); + + switch (port) { + case 0: printk(KERN_INFO "PCIE0: LOOP %08x\n", SDR_READ(PESDR0_LOOP)); break; + case 1: printk(KERN_INFO "PCIE1: LOOP %08x\n", SDR_READ(PESDR1_LOOP)); break; + case 2: printk(KERN_INFO "PCIE2: LOOP %08x\n", SDR_READ(PESDR2_LOOP)); break; + } + + /* + * Map UTL registers at 0xc_1000_0n00 + */ + switch (port) { + case 0: + mtdcr(DCRN_PEGPL_REGBAH(PCIE0), 0x0000000c); + mtdcr(DCRN_PEGPL_REGBAL(PCIE0), 0x10000000); + mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001); + mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0x68782800); + break; + + case 1: + mtdcr(DCRN_PEGPL_REGBAH(PCIE1), 0x0000000c); + mtdcr(DCRN_PEGPL_REGBAL(PCIE1), 0x10001000); + mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001); + mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0x68782800); + break; + + case 2: + mtdcr(DCRN_PEGPL_REGBAH(PCIE2), 0x0000000c); + mtdcr(DCRN_PEGPL_REGBAL(PCIE2), 0x10002000); + mtdcr(DCRN_PEGPL_REGMSK(PCIE2), 0x00007001); + mtdcr(DCRN_PEGPL_SPECIAL(PCIE2), 0x68782800); + } + + utl_base = ioremap64(0xc10000000ull + 0x1000 * port, 0x100); + + /* + * Set buffer allocations and then assert VRB and TXE. + */ + out_be32(utl_base + PEUTL_OUTTR, 0x08000000); + out_be32(utl_base + PEUTL_INTR, 0x02000000); + out_be32(utl_base + PEUTL_OPDBSZ, 0x10000000); + out_be32(utl_base + PEUTL_PBBSZ, 0x53000000); + out_be32(utl_base + PEUTL_IPHBSZ, 0x08000000); + out_be32(utl_base + PEUTL_IPDBSZ, 0x10000000); + out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000); + out_be32(utl_base + PEUTL_PCTL, 0x80800066); + + iounmap(utl_base); + + /* + * We map PCI Express configuration access into the 512MB regions + * PCIE0: 0xc_4000_0000 + * PCIE1: 0xc_8000_0000 + * PCIE2: 0xc_c000_0000 + */ + switch (port) { + case 0: + mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), 0x0000000c); + mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), 0x40000000); + mtdcr(DCRN_PEGPL_CFGMSK(PCIE0), 0xe0000001); /* 512MB region, valid */ + break; + + case 1: + mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), 0x0000000c); + mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), 0x80000000); + mtdcr(DCRN_PEGPL_CFGMSK(PCIE1), 0xe0000001); /* 512MB region, valid */ + break; + + case 2: + mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), 0x0000000c); + mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), 0xc0000000); + mtdcr(DCRN_PEGPL_CFGMSK(PCIE2), 0xe0000001); /* 512MB region, valid */ + break; + } + + /* + * Check for VC0 active and assert RDY. + */ + switch (port) { + case 0: + if (!(SDR_READ(PESDR0_RCSSTS) & (1 << 16))) + printk(KERN_WARNING "PCIE0: VC0 not active\n"); + SDR_WRITE(PESDR0_RCSSET, SDR_READ(PESDR0_RCSSET) | 1 << 20); + break; + case 1: + if (!(SDR_READ(PESDR1_RCSSTS) & (1 << 16))) + printk(KERN_WARNING "PCIE0: VC0 not active\n"); + SDR_WRITE(PESDR1_RCSSET, SDR_READ(PESDR1_RCSSET) | 1 << 20); + break; + case 2: + if (!(SDR_READ(PESDR2_RCSSTS) & (1 << 16))) + printk(KERN_WARNING "PCIE0: VC0 not active\n"); + SDR_WRITE(PESDR2_RCSSET, SDR_READ(PESDR2_RCSSET) | 1 << 20); + break; + } + +#if 0 + /* Dump all config regs */ + for (i = 0x300; i <= 0x320; ++i) + printk("[%04x] 0x%08x\n", i, SDR_READ(i)); + for (i = 0x340; i <= 0x353; ++i) + printk("[%04x] 0x%08x\n", i, SDR_READ(i)); + for (i = 0x370; i <= 0x383; ++i) + printk("[%04x] 0x%08x\n", i, SDR_READ(i)); + for (i = 0x3a0; i <= 0x3a2; ++i) + printk("[%04x] 0x%08x\n", i, SDR_READ(i)); + for (i = 0x3c0; i <= 0x3c3; ++i) + printk("[%04x] 0x%08x\n", i, SDR_READ(i)); +#endif + + mdelay(100); + + return 0; +} + +void ppc440spe_setup_pcie(struct pci_controller *hose, int port) +{ + void __iomem *mbase; + + /* + * Map 16MB, which is enough for 4 bits of bus # + */ + hose->cfg_data = ioremap64(0xc40000000ull + port * 0x40000000, + 1 << 24); + hose->ops = &pcie_pci_ops; + + /* + * Set bus numbers on our root port + */ + mbase = ioremap64(0xc50000000ull + port * 0x40000000, 4096); + out_8(mbase + PCI_PRIMARY_BUS, 0); + out_8(mbase + PCI_SECONDARY_BUS, 0); + + /* + * Set up outbound translation to hose->mem_space from PLB + * addresses at an offset of 0xd_0000_0000. We set the low + * bits of the mask to 11 to turn off splitting into 8 + * subregions and to enable the outbound translation. + */ + out_le32(mbase + PECFG_POM0LAH, 0); + out_le32(mbase + PECFG_POM0LAL, hose->mem_space.start); + + switch (port) { + case 0: + mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0), 0x0000000d); + mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0), hose->mem_space.start); + mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff); + mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0), + ~(hose->mem_space.end - hose->mem_space.start) | 3); + break; + case 1: + mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1), 0x0000000d); + mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1), hose->mem_space.start); + mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff); + mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1), + ~(hose->mem_space.end - hose->mem_space.start) | 3); + + break; + case 2: + mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2), 0x0000000d); + mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2), hose->mem_space.start); + mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff); + mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2), + ~(hose->mem_space.end - hose->mem_space.start) | 3); + break; + } + + /* Set up 16GB inbound memory window at 0 */ + out_le32(mbase + PCI_BASE_ADDRESS_0, 0); + out_le32(mbase + PCI_BASE_ADDRESS_1, 0); + out_le32(mbase + PECFG_BAR0HMPA, 0x7fffffc); + out_le32(mbase + PECFG_BAR0LMPA, 0); + out_le32(mbase + PECFG_PIM0LAL, 0); + out_le32(mbase + PECFG_PIM0LAH, 0); + out_le32(mbase + PECFG_PIMEN, 0x1); + + /* Enable I/O, Mem, and Busmaster cycles */ + out_le16(mbase + PCI_COMMAND, + in_le16(mbase + PCI_COMMAND) | + PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + + iounmap(mbase); +} diff --git a/arch/ppc/syslib/ppc440spe_pcie.h b/arch/ppc/syslib/ppc440spe_pcie.h new file mode 100644 index 00000000000..55b765ad327 --- /dev/null +++ b/arch/ppc/syslib/ppc440spe_pcie.h @@ -0,0 +1,149 @@ +/* + * Copyright (c) 2005 Cisco Systems. All rights reserved. + * Roland Dreier + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __PPC_SYSLIB_PPC440SPE_PCIE_H +#define __PPC_SYSLIB_PPC440SPE_PCIE_H + +#define DCRN_SDR0_CFGADDR 0x00e +#define DCRN_SDR0_CFGDATA 0x00f + +#define DCRN_PCIE0_BASE 0x100 +#define DCRN_PCIE1_BASE 0x120 +#define DCRN_PCIE2_BASE 0x140 +#define PCIE0 DCRN_PCIE0_BASE +#define PCIE1 DCRN_PCIE1_BASE +#define PCIE2 DCRN_PCIE2_BASE + +#define DCRN_PEGPL_CFGBAH(base) (base + 0x00) +#define DCRN_PEGPL_CFGBAL(base) (base + 0x01) +#define DCRN_PEGPL_CFGMSK(base) (base + 0x02) +#define DCRN_PEGPL_MSGBAH(base) (base + 0x03) +#define DCRN_PEGPL_MSGBAL(base) (base + 0x04) +#define DCRN_PEGPL_MSGMSK(base) (base + 0x05) +#define DCRN_PEGPL_OMR1BAH(base) (base + 0x06) +#define DCRN_PEGPL_OMR1BAL(base) (base + 0x07) +#define DCRN_PEGPL_OMR1MSKH(base) (base + 0x08) +#define DCRN_PEGPL_OMR1MSKL(base) (base + 0x09) +#define DCRN_PEGPL_REGBAH(base) (base + 0x12) +#define DCRN_PEGPL_REGBAL(base) (base + 0x13) +#define DCRN_PEGPL_REGMSK(base) (base + 0x14) +#define DCRN_PEGPL_SPECIAL(base) (base + 0x15) + +/* + * System DCRs (SDRs) + */ +#define PESDR0_PLLLCT1 0x03a0 +#define PESDR0_PLLLCT2 0x03a1 +#define PESDR0_PLLLCT3 0x03a2 + +#define PESDR0_UTLSET1 0x0300 +#define PESDR0_UTLSET2 0x0301 +#define PESDR0_DLPSET 0x0302 +#define PESDR0_LOOP 0x0303 +#define PESDR0_RCSSET 0x0304 +#define PESDR0_RCSSTS 0x0305 +#define PESDR0_HSSL0SET1 0x0306 +#define PESDR0_HSSL0SET2 0x0307 +#define PESDR0_HSSL0STS 0x0308 +#define PESDR0_HSSL1SET1 0x0309 +#define PESDR0_HSSL1SET2 0x030a +#define PESDR0_HSSL1STS 0x030b +#define PESDR0_HSSL2SET1 0x030c +#define PESDR0_HSSL2SET2 0x030d +#define PESDR0_HSSL2STS 0x030e +#define PESDR0_HSSL3SET1 0x030f +#define PESDR0_HSSL3SET2 0x0310 +#define PESDR0_HSSL3STS 0x0311 +#define PESDR0_HSSL4SET1 0x0312 +#define PESDR0_HSSL4SET2 0x0313 +#define PESDR0_HSSL4STS 0x0314 +#define PESDR0_HSSL5SET1 0x0315 +#define PESDR0_HSSL5SET2 0x0316 +#define PESDR0_HSSL5STS 0x0317 +#define PESDR0_HSSL6SET1 0x0318 +#define PESDR0_HSSL6SET2 0x0319 +#define PESDR0_HSSL6STS 0x031a +#define PESDR0_HSSL7SET1 0x031b +#define PESDR0_HSSL7SET2 0x031c +#define PESDR0_HSSL7STS 0x031d +#define PESDR0_HSSCTLSET 0x031e +#define PESDR0_LANE_ABCD 0x031f +#define PESDR0_LANE_EFGH 0x0320 + +#define PESDR1_UTLSET1 0x0340 +#define PESDR1_UTLSET2 0x0341 +#define PESDR1_DLPSET 0x0342 +#define PESDR1_LOOP 0x0343 +#define PESDR1_RCSSET 0x0344 +#define PESDR1_RCSSTS 0x0345 +#define PESDR1_HSSL0SET1 0x0346 +#define PESDR1_HSSL0SET2 0x0347 +#define PESDR1_HSSL0STS 0x0348 +#define PESDR1_HSSL1SET1 0x0349 +#define PESDR1_HSSL1SET2 0x034a +#define PESDR1_HSSL1STS 0x034b +#define PESDR1_HSSL2SET1 0x034c +#define PESDR1_HSSL2SET2 0x034d +#define PESDR1_HSSL2STS 0x034e +#define PESDR1_HSSL3SET1 0x034f +#define PESDR1_HSSL3SET2 0x0350 +#define PESDR1_HSSL3STS 0x0351 +#define PESDR1_HSSCTLSET 0x0352 +#define PESDR1_LANE_ABCD 0x0353 + +#define PESDR2_UTLSET1 0x0370 +#define PESDR2_UTLSET2 0x0371 +#define PESDR2_DLPSET 0x0372 +#define PESDR2_LOOP 0x0373 +#define PESDR2_RCSSET 0x0374 +#define PESDR2_RCSSTS 0x0375 +#define PESDR2_HSSL0SET1 0x0376 +#define PESDR2_HSSL0SET2 0x0377 +#define PESDR2_HSSL0STS 0x0378 +#define PESDR2_HSSL1SET1 0x0379 +#define PESDR2_HSSL1SET2 0x037a +#define PESDR2_HSSL1STS 0x037b +#define PESDR2_HSSL2SET1 0x037c +#define PESDR2_HSSL2SET2 0x037d +#define PESDR2_HSSL2STS 0x037e +#define PESDR2_HSSL3SET1 0x037f +#define PESDR2_HSSL3SET2 0x0380 +#define PESDR2_HSSL3STS 0x0381 +#define PESDR2_HSSCTLSET 0x0382 +#define PESDR2_LANE_ABCD 0x0383 + +/* + * UTL register offsets + */ +#define PEUTL_PBBSZ 0x20 +#define PEUTL_OPDBSZ 0x68 +#define PEUTL_IPHBSZ 0x70 +#define PEUTL_IPDBSZ 0x78 +#define PEUTL_OUTTR 0x90 +#define PEUTL_INTR 0x98 +#define PEUTL_PCTL 0xa0 +#define PEUTL_RCIRQEN 0xb8 + +/* + * Config space register offsets + */ +#define PECFG_BAR0LMPA 0x210 +#define PECFG_BAR0HMPA 0x214 +#define PECFG_PIMEN 0x33c +#define PECFG_PIM0LAL 0x340 +#define PECFG_PIM0LAH 0x344 +#define PECFG_POM0LAL 0x380 +#define PECFG_POM0LAH 0x384 + +int ppc440spe_init_pcie(void); +int ppc440spe_init_pcie_rootport(int port); +void ppc440spe_setup_pcie(struct pci_controller *hose, int port); + +#endif /* __PPC_SYSLIB_PPC440SPE_PCIE_H */ diff --git a/arch/ppc/syslib/ppc4xx_pic.c b/arch/ppc/syslib/ppc4xx_pic.c index 0b435633a0d..aa4165144ec 100644 --- a/arch/ppc/syslib/ppc4xx_pic.c +++ b/arch/ppc/syslib/ppc4xx_pic.c @@ -38,6 +38,7 @@ extern unsigned char ppc4xx_uic_ext_irq_cfg[] __attribute__ ((weak)); #define IRQ_MASK_UICx(irq) (1 << (31 - ((irq) & 0x1f))) #define IRQ_MASK_UIC1(irq) IRQ_MASK_UICx(irq) #define IRQ_MASK_UIC2(irq) IRQ_MASK_UICx(irq) +#define IRQ_MASK_UIC3(irq) IRQ_MASK_UICx(irq) #define UIC_HANDLERS(n) \ static void ppc4xx_uic##n##_enable(unsigned int irq) \ @@ -88,7 +89,38 @@ static void ppc4xx_uic##n##_end(unsigned int irq) \ .end = ppc4xx_uic##n##_end, \ } \ -#if NR_UICS == 3 +#if NR_UICS == 4 +#define ACK_UIC0_PARENT +#define ACK_UIC1_PARENT mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC1NC); +#define ACK_UIC2_PARENT mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC2NC); +#define ACK_UIC3_PARENT mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC3NC); +UIC_HANDLERS(0); +UIC_HANDLERS(1); +UIC_HANDLERS(2); +UIC_HANDLERS(3); + +static int ppc4xx_pic_get_irq(struct pt_regs *regs) +{ + u32 uic0 = mfdcr(DCRN_UIC_MSR(UIC0)); + if (uic0 & UIC0_UIC1NC) + return 64 - ffs(mfdcr(DCRN_UIC_MSR(UIC1))); + else if (uic0 & UIC0_UIC2NC) + return 96 - ffs(mfdcr(DCRN_UIC_MSR(UIC2))); + else if (uic0 & UIC0_UIC3NC) + return 128 - ffs(mfdcr(DCRN_UIC_MSR(UIC3))); + else + return uic0 ? 32 - ffs(uic0) : -1; +} + +static void __init ppc4xx_pic_impl_init(void) +{ + /* Enable cascade interrupts in UIC0 */ + ppc_cached_irq_mask[0] |= UIC0_UIC1NC | UIC0_UIC2NC | UIC0_UIC3NC; + mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC1NC | UIC0_UIC2NC | UIC0_UIC3NC); + mtdcr(DCRN_UIC_ER(UIC0), ppc_cached_irq_mask[0]); +} + +#elif NR_UICS == 3 #define ACK_UIC0_PARENT mtdcr(DCRN_UIC_SR(UICB), UICB_UIC0NC); #define ACK_UIC1_PARENT mtdcr(DCRN_UIC_SR(UICB), UICB_UIC1NC); #define ACK_UIC2_PARENT mtdcr(DCRN_UIC_SR(UICB), UICB_UIC2NC); @@ -170,6 +202,9 @@ static struct ppc4xx_uic_impl { { .decl = DECLARE_UIC(1), .base = UIC1 }, #if NR_UICS > 2 { .decl = DECLARE_UIC(2), .base = UIC2 }, +#if NR_UICS > 3 + { .decl = DECLARE_UIC(3), .base = UIC3 }, +#endif #endif #endif }; -- cgit v1.2.3 From 90eb2665841d7b444602736e2141a01c948f75b1 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 7 Nov 2005 00:58:14 -0800 Subject: [PATCH] ppc32: Add Yucca (440SPe eval board) platform Add support for AMCC PowerPC 440SPe "Yucca" eval board platform. Signed-off-by: Roland Dreier Cc: Matt Porter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/boot/simple/Makefile | 6 + arch/ppc/platforms/4xx/Kconfig | 11 +- arch/ppc/platforms/4xx/Makefile | 1 + arch/ppc/platforms/4xx/yucca.c | 395 ++++++++++++++++++++++++++++++++++++++++ arch/ppc/platforms/4xx/yucca.h | 111 +++++++++++ arch/ppc/syslib/Makefile | 1 + 6 files changed, 523 insertions(+), 2 deletions(-) create mode 100644 arch/ppc/platforms/4xx/yucca.c create mode 100644 arch/ppc/platforms/4xx/yucca.h (limited to 'arch') diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile index b7bd8f61a4a..ff0904ee889 100644 --- a/arch/ppc/boot/simple/Makefile +++ b/arch/ppc/boot/simple/Makefile @@ -79,6 +79,12 @@ zimageinitrd-$(CONFIG_LUAN) := zImage.initrd-TREE entrypoint-$(CONFIG_LUAN) := 0x01000000 extra.o-$(CONFIG_LUAN) := pibs.o + zimage-$(CONFIG_YUCCA) := zImage-TREE +zimageinitrd-$(CONFIG_YUCCA) := zImage.initrd-TREE + end-$(CONFIG_YUCCA) := yucca + entrypoint-$(CONFIG_YUCCA) := 0x01000000 + extra.o-$(CONFIG_YUCCA) := pibs.o + zimage-$(CONFIG_OCOTEA) := zImage-TREE zimageinitrd-$(CONFIG_OCOTEA) := zImage.initrd-TREE end-$(CONFIG_OCOTEA) := ocotea diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig index 108d5a730f8..e70e4c6ec78 100644 --- a/arch/ppc/platforms/4xx/Kconfig +++ b/arch/ppc/platforms/4xx/Kconfig @@ -82,6 +82,12 @@ config LUAN help This option enables support for the IBM PPC440SP evaluation board. +config YUCCA + bool "Yucca" + select WANT_EARLY_SERIAL + help + This option enables support for the AMCC PPC440SPe evaluation board. + config OCOTEA bool "Ocotea" select WANT_EARLY_SERIAL @@ -126,7 +132,8 @@ config 440SP config 440SPE bool - default n + depends on YUCCA + default y config 440 bool @@ -162,7 +169,7 @@ config BOOKE config IBM_OCP bool - depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT + depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT default y config XILINX_OCP diff --git a/arch/ppc/platforms/4xx/Makefile b/arch/ppc/platforms/4xx/Makefile index 694accdb59f..c9bb6117095 100644 --- a/arch/ppc/platforms/4xx/Makefile +++ b/arch/ppc/platforms/4xx/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_EBONY) += ebony.o obj-$(CONFIG_EP405) += ep405.o obj-$(CONFIG_BUBINGA) += bubinga.o obj-$(CONFIG_LUAN) += luan.o +obj-$(CONFIG_YUCCA) += yucca.o obj-$(CONFIG_OCOTEA) += ocotea.o obj-$(CONFIG_REDWOOD_5) += redwood5.o obj-$(CONFIG_REDWOOD_6) += redwood6.o diff --git a/arch/ppc/platforms/4xx/yucca.c b/arch/ppc/platforms/4xx/yucca.c new file mode 100644 index 00000000000..e60f4bd437e --- /dev/null +++ b/arch/ppc/platforms/4xx/yucca.c @@ -0,0 +1,395 @@ +/* + * arch/ppc/platforms/4xx/yucca.c + * + * Yucca board specific routines + * + * Roland Dreier (based on luan.c by Matt Porter) + * + * Copyright 2004-2005 MontaVista Software Inc. + * Copyright (c) 2005 Cisco Systems. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +extern bd_t __res; + +static struct ibm44x_clocks clocks __initdata; + +static void __init +yucca_calibrate_decr(void) +{ + unsigned int freq; + + if (mfspr(SPRN_CCR1) & CCR1_TCS) + freq = YUCCA_TMR_CLK; + else + freq = clocks.cpu; + + ibm44x_calibrate_decr(freq); +} + +static int +yucca_show_cpuinfo(struct seq_file *m) +{ + seq_printf(m, "vendor\t\t: AMCC\n"); + seq_printf(m, "machine\t\t: PPC440SPe EVB (Yucca)\n"); + + return 0; +} + +static enum { + HOSE_UNKNOWN, + HOSE_PCIX, + HOSE_PCIE0, + HOSE_PCIE1, + HOSE_PCIE2 +} hose_type[4]; + +static inline int +yucca_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + struct pci_controller *hose = pci_bus_to_hose(dev->bus->number); + + if (hose_type[hose->index] == HOSE_PCIX) { + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + { 81, -1, -1, -1 }, /* IDSEL 1 - PCIX0 Slot 0 */ + }; + const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; + } else if (hose_type[hose->index] == HOSE_PCIE0) { + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + { 96, 97, 98, 99 }, + }; + const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; + } else if (hose_type[hose->index] == HOSE_PCIE1) { + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + { 100, 101, 102, 103 }, + }; + const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; + } else if (hose_type[hose->index] == HOSE_PCIE2) { + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + { 104, 105, 106, 107 }, + }; + const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; + } + return -1; +} + +static void __init yucca_set_emacdata(void) +{ + struct ocp_def *def; + struct ocp_func_emac_data *emacdata; + + /* Set phy_map, phy_mode, and mac_addr for the EMAC */ + def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 0); + emacdata = def->additions; + emacdata->phy_map = 0x00000001; /* Skip 0x00 */ + emacdata->phy_mode = PHY_MODE_GMII; + memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6); +} + +static int __init yucca_pcie_card_present(int port) +{ + void __iomem *pcie_fpga_base; + u16 reg; + + pcie_fpga_base = ioremap64(YUCCA_FPGA_REG_BASE, YUCCA_FPGA_REG_SIZE); + reg = in_be16(pcie_fpga_base + FPGA_REG1C); + iounmap(pcie_fpga_base); + + switch(port) { + case 0: return !(reg & FPGA_REG1C_PE0_PRSNT); + case 1: return !(reg & FPGA_REG1C_PE1_PRSNT); + case 2: return !(reg & FPGA_REG1C_PE2_PRSNT); + default: return 0; + } +} + +/* + * For the given slot, set rootpoint mode, send power to the slot, + * turn on the green LED and turn off the yellow LED, enable the clock + * and turn off reset. + */ +static void __init yucca_setup_pcie_fpga_rootpoint(int port) +{ + void __iomem *pcie_reg_fpga_base; + u16 power, clock, green_led, yellow_led, reset_off, rootpoint, endpoint; + + pcie_reg_fpga_base = ioremap64(YUCCA_FPGA_REG_BASE, YUCCA_FPGA_REG_SIZE); + + switch(port) { + case 0: + rootpoint = FPGA_REG1C_PE0_ROOTPOINT; + endpoint = 0; + power = FPGA_REG1A_PE0_PWRON; + green_led = FPGA_REG1A_PE0_GLED; + clock = FPGA_REG1A_PE0_REFCLK_ENABLE; + yellow_led = FPGA_REG1A_PE0_YLED; + reset_off = FPGA_REG1C_PE0_PERST; + break; + case 1: + rootpoint = 0; + endpoint = FPGA_REG1C_PE1_ENDPOINT; + power = FPGA_REG1A_PE1_PWRON; + green_led = FPGA_REG1A_PE1_GLED; + clock = FPGA_REG1A_PE1_REFCLK_ENABLE; + yellow_led = FPGA_REG1A_PE1_YLED; + reset_off = FPGA_REG1C_PE1_PERST; + break; + case 2: + rootpoint = 0; + endpoint = FPGA_REG1C_PE2_ENDPOINT; + power = FPGA_REG1A_PE2_PWRON; + green_led = FPGA_REG1A_PE2_GLED; + clock = FPGA_REG1A_PE2_REFCLK_ENABLE; + yellow_led = FPGA_REG1A_PE2_YLED; + reset_off = FPGA_REG1C_PE2_PERST; + break; + + default: + return; + } + + out_be16(pcie_reg_fpga_base + FPGA_REG1A, + ~(power | clock | green_led) & + (yellow_led | in_be16(pcie_reg_fpga_base + FPGA_REG1A))); + out_be16(pcie_reg_fpga_base + FPGA_REG1C, + ~(endpoint | reset_off) & + (rootpoint | in_be16(pcie_reg_fpga_base + FPGA_REG1C))); + + /* + * Leave device in reset for a while after powering on the + * slot to give it a chance to initialize. + */ + mdelay(250); + + out_be16(pcie_reg_fpga_base + FPGA_REG1C, + reset_off | in_be16(pcie_reg_fpga_base + FPGA_REG1C)); + + iounmap(pcie_reg_fpga_base); +} + +static void __init +yucca_setup_hoses(void) +{ + struct pci_controller *hose; + char name[20]; + int i; + + if (0 && ppc440spe_init_pcie()) { + printk(KERN_WARNING "PPC440SPe PCI Express initialization failed\n"); + return; + } + + for (i = 0; i <= 2; ++i) { + if (!yucca_pcie_card_present(i)) + continue; + + printk(KERN_INFO "PCIE%d: card present\n", i); + yucca_setup_pcie_fpga_rootpoint(i); + if (ppc440spe_init_pcie_rootport(i)) { + printk(KERN_WARNING "PCIE%d: initialization failed\n", i); + continue; + } + + hose = pcibios_alloc_controller(); + if (!hose) + return; + + sprintf(name, "PCIE%d host bridge", i); + pci_init_resource(&hose->io_resource, + YUCCA_PCIX_LOWER_IO, + YUCCA_PCIX_UPPER_IO, + IORESOURCE_IO, + name); + + hose->mem_space.start = YUCCA_PCIE_LOWER_MEM + + i * YUCCA_PCIE_MEM_SIZE; + hose->mem_space.end = hose->mem_space.start + + YUCCA_PCIE_MEM_SIZE - 1; + + pci_init_resource(&hose->mem_resources[0], + hose->mem_space.start, + hose->mem_space.end, + IORESOURCE_MEM, + name); + + hose->first_busno = 0; + hose->last_busno = 15; + hose_type[hose->index] = HOSE_PCIE0 + i; + + ppc440spe_setup_pcie(hose, i); + hose->last_busno = pciauto_bus_scan(hose, hose->first_busno); + } + + ppc_md.pci_swizzle = common_swizzle; + ppc_md.pci_map_irq = yucca_map_irq; +} + +TODC_ALLOC(); + +static void __init +yucca_early_serial_map(void) +{ + struct uart_port port; + + /* Setup ioremapped serial port access */ + memset(&port, 0, sizeof(port)); + port.membase = ioremap64(PPC440SPE_UART0_ADDR, 8); + port.irq = UART0_INT; + port.uartclk = clocks.uart0; + port.regshift = 0; + port.iotype = SERIAL_IO_MEM; + port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; + port.line = 0; + + if (early_serial_setup(&port) != 0) { + printk("Early serial init of port 0 failed\n"); + } + + port.membase = ioremap64(PPC440SPE_UART1_ADDR, 8); + port.irq = UART1_INT; + port.uartclk = clocks.uart1; + port.line = 1; + + if (early_serial_setup(&port) != 0) { + printk("Early serial init of port 1 failed\n"); + } + + port.membase = ioremap64(PPC440SPE_UART2_ADDR, 8); + port.irq = UART2_INT; + port.uartclk = BASE_BAUD; + port.line = 2; + + if (early_serial_setup(&port) != 0) { + printk("Early serial init of port 2 failed\n"); + } +} + +static void __init +yucca_setup_arch(void) +{ + yucca_set_emacdata(); + +#if !defined(CONFIG_BDI_SWITCH) + /* + * The Abatron BDI JTAG debugger does not tolerate others + * mucking with the debug registers. + */ + mtspr(SPRN_DBCR0, (DBCR0_TDE | DBCR0_IDM)); +#endif + + /* + * Determine various clocks. + * To be completely correct we should get SysClk + * from FPGA, because it can be changed by on-board switches + * --ebs + */ + /* 440GX and 440SPe clocking is the same - rd */ + ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200); + ocp_sys_info.opb_bus_freq = clocks.opb; + + /* init to some ~sane value until calibrate_delay() runs */ + loops_per_jiffy = 50000000/HZ; + + /* Setup PCIXn host bridges */ + yucca_setup_hoses(); + +#ifdef CONFIG_BLK_DEV_INITRD + if (initrd_start) + ROOT_DEV = Root_RAM0; + else +#endif +#ifdef CONFIG_ROOT_NFS + ROOT_DEV = Root_NFS; +#else + ROOT_DEV = Root_HDA1; +#endif + + yucca_early_serial_map(); + + /* Identify the system */ + printk("Yucca port (Roland Dreier )\n"); +} + +void __init platform_init(unsigned long r3, unsigned long r4, + unsigned long r5, unsigned long r6, unsigned long r7) +{ + ibm44x_platform_init(r3, r4, r5, r6, r7); + + ppc_md.setup_arch = yucca_setup_arch; + ppc_md.show_cpuinfo = yucca_show_cpuinfo; + ppc_md.find_end_of_memory = ibm440sp_find_end_of_memory; + ppc_md.get_irq = NULL; /* Set in ppc4xx_pic_init() */ + + ppc_md.calibrate_decr = yucca_calibrate_decr; +#ifdef CONFIG_KGDB + ppc_md.early_serial_map = yucca_early_serial_map; +#endif +} diff --git a/arch/ppc/platforms/4xx/yucca.h b/arch/ppc/platforms/4xx/yucca.h new file mode 100644 index 00000000000..01a4afea151 --- /dev/null +++ b/arch/ppc/platforms/4xx/yucca.h @@ -0,0 +1,111 @@ +/* + * arch/ppc/platforms/4xx/yucca.h + * + * Yucca board definitions + * + * Roland Dreier (based on luan.h by Matt Porter) + * + * Copyright 2004-2005 MontaVista Software Inc. + * Copyright (c) 2005 Cisco Systems. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifdef __KERNEL__ +#ifndef __ASM_YUCCA_H__ +#define __ASM_YUCCA_H__ + +#include +#include + +/* F/W TLB mapping used in bootloader glue to reset EMAC */ +#define PPC44x_EMAC0_MR0 0xa0000800 + +/* Location of MAC addresses in PIBS image */ +#define PIBS_FLASH_BASE 0xffe00000 +#define PIBS_MAC_BASE (PIBS_FLASH_BASE+0x1b0400) + +/* External timer clock frequency */ +#define YUCCA_TMR_CLK 25000000 + +/* + * FPGA registers + */ +#define YUCCA_FPGA_REG_BASE 0x00000004e2000000ULL +#define YUCCA_FPGA_REG_SIZE 0x24 + +#define FPGA_REG1A 0x1a + +#define FPGA_REG1A_PE0_GLED 0x8000 +#define FPGA_REG1A_PE1_GLED 0x4000 +#define FPGA_REG1A_PE2_GLED 0x2000 +#define FPGA_REG1A_PE0_YLED 0x1000 +#define FPGA_REG1A_PE1_YLED 0x0800 +#define FPGA_REG1A_PE2_YLED 0x0400 +#define FPGA_REG1A_PE0_PWRON 0x0200 +#define FPGA_REG1A_PE1_PWRON 0x0100 +#define FPGA_REG1A_PE2_PWRON 0x0080 +#define FPGA_REG1A_PE0_REFCLK_ENABLE 0x0040 +#define FPGA_REG1A_PE1_REFCLK_ENABLE 0x0020 +#define FPGA_REG1A_PE2_REFCLK_ENABLE 0x0010 +#define FPGA_REG1A_PE_SPREAD0 0x0008 +#define FPGA_REG1A_PE_SPREAD1 0x0004 +#define FPGA_REG1A_PE_SELSOURCE_0 0x0002 +#define FPGA_REG1A_PE_SELSOURCE_1 0x0001 + +#define FPGA_REG1C 0x1c + +#define FPGA_REG1C_PE0_ROOTPOINT 0x8000 +#define FPGA_REG1C_PE1_ENDPOINT 0x4000 +#define FPGA_REG1C_PE2_ENDPOINT 0x2000 +#define FPGA_REG1C_PE0_PRSNT 0x1000 +#define FPGA_REG1C_PE1_PRSNT 0x0800 +#define FPGA_REG1C_PE2_PRSNT 0x0400 +#define FPGA_REG1C_PE0_WAKE 0x0080 +#define FPGA_REG1C_PE1_WAKE 0x0040 +#define FPGA_REG1C_PE2_WAKE 0x0020 +#define FPGA_REG1C_PE0_PERST 0x0010 +#define FPGA_REG1C_PE1_PERST 0x0008 +#define FPGA_REG1C_PE2_PERST 0x0004 + +/* + * Serial port defines + */ +#define RS_TABLE_SIZE 3 + +/* PIBS defined UART mappings, used before early_serial_setup */ +#define UART0_IO_BASE 0xa0000200 +#define UART1_IO_BASE 0xa0000300 +#define UART2_IO_BASE 0xa0000600 + +#define BASE_BAUD 11059200 +#define STD_UART_OP(num) \ + { 0, BASE_BAUD, 0, UART##num##_INT, \ + (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \ + iomem_base: (void*)UART##num##_IO_BASE, \ + io_type: SERIAL_IO_MEM}, + +#define SERIAL_PORT_DFNS \ + STD_UART_OP(0) \ + STD_UART_OP(1) \ + STD_UART_OP(2) + +/* PCI support */ +#define YUCCA_PCIX_LOWER_IO 0x00000000 +#define YUCCA_PCIX_UPPER_IO 0x0000ffff +#define YUCCA_PCIX_LOWER_MEM 0x80000000 +#define YUCCA_PCIX_UPPER_MEM 0x8fffffff +#define YUCCA_PCIE_LOWER_MEM 0x90000000 +#define YUCCA_PCIE_MEM_SIZE 0x10000000 + +#define YUCCA_PCIX_MEM_SIZE 0x10000000 +#define YUCCA_PCIX_MEM_OFFSET 0x00000000 +#define YUCCA_PCIE_MEM_SIZE 0x10000000 +#define YUCCA_PCIE_MEM_OFFSET 0x00000000 + +#endif /* __ASM_YUCCA_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index 13dff1e51f1..dcd168f9a7a 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -54,6 +54,7 @@ obj-$(CONFIG_GT64260) += gt64260_pic.o obj-$(CONFIG_LOPEC) += pci_auto.o todc_time.o obj-$(CONFIG_HDPU) += pci_auto.o obj-$(CONFIG_LUAN) += pci_auto.o todc_time.o +obj-$(CONFIG_YUCCA) += pci_auto.o todc_time.o obj-$(CONFIG_KATANA) += pci_auto.o obj-$(CONFIG_MV64360) += mv64360_pic.o obj-$(CONFIG_MV64X60) += mv64x60.o mv64x60_win.o -- cgit v1.2.3 From 3e9e7c1d0b7a36fb8affb973a054c5098e27baa8 Mon Sep 17 00:00:00 2001 From: Matt Porter Date: Mon, 7 Nov 2005 00:58:15 -0800 Subject: [PATCH] ppc32: cleanup AMCC PPC40x eval boards to support U-Boot Cleanup PPC40x eval boards (bubinga, walnut and sycamore) to support U-Boot as bootloader. The OpenBIOS bd_info struct is not used in the kernel anymore (only U-Boot now). uImage (U-Boot) tested on walnut, sycamore and bubinga zImage (OpenBIOS) tested on sycamore, bubinga and ebony Signed-off-by: Stefan Roese Signed-off-by: Matt Porter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/boot/simple/Makefile | 21 +++++++- arch/ppc/boot/simple/misc.c | 16 ++++-- arch/ppc/boot/simple/openbios.c | 106 +++++++++++++++++++++++++++++++++++--- arch/ppc/platforms/4xx/Kconfig | 2 +- arch/ppc/platforms/4xx/bubinga.c | 2 +- arch/ppc/platforms/4xx/bubinga.h | 64 ++++++++++------------- arch/ppc/platforms/4xx/ebony.h | 4 +- arch/ppc/platforms/4xx/sycamore.c | 7 +-- arch/ppc/platforms/4xx/sycamore.h | 67 ++++++++++-------------- arch/ppc/platforms/4xx/walnut.c | 2 +- arch/ppc/platforms/4xx/walnut.h | 67 +++++++++--------------- 11 files changed, 217 insertions(+), 141 deletions(-) (limited to 'arch') diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile index ff0904ee889..82df88b01bb 100644 --- a/arch/ppc/boot/simple/Makefile +++ b/arch/ppc/boot/simple/Makefile @@ -67,6 +67,12 @@ zimageinitrd-$(CONFIG_BAMBOO) := zImage.initrd-TREE entrypoint-$(CONFIG_BAMBOO) := 0x01000000 extra.o-$(CONFIG_BAMBOO) := pibs.o + zimage-$(CONFIG_BUBINGA) := zImage-TREE +zimageinitrd-$(CONFIG_BUBINGA) := zImage.initrd-TREE + end-$(CONFIG_BUBINGA) := bubinga + entrypoint-$(CONFIG_BUBINGA) := 0x01000000 + extra.o-$(CONFIG_BUBINGA) := openbios.o + zimage-$(CONFIG_EBONY) := zImage-TREE zimageinitrd-$(CONFIG_EBONY) := zImage.initrd-TREE end-$(CONFIG_EBONY) := ebony @@ -91,6 +97,18 @@ zimageinitrd-$(CONFIG_OCOTEA) := zImage.initrd-TREE entrypoint-$(CONFIG_OCOTEA) := 0x01000000 extra.o-$(CONFIG_OCOTEA) := pibs.o + zimage-$(CONFIG_SYCAMORE) := zImage-TREE +zimageinitrd-$(CONFIG_SYCAMORE) := zImage.initrd-TREE + end-$(CONFIG_SYCAMORE) := sycamore + entrypoint-$(CONFIG_SYCAMORE) := 0x01000000 + extra.o-$(CONFIG_SYCAMORE) := openbios.o + + zimage-$(CONFIG_WALNUT) := zImage-TREE +zimageinitrd-$(CONFIG_WALNUT) := zImage.initrd-TREE + end-$(CONFIG_WALNUT) := walnut + entrypoint-$(CONFIG_WALNUT) := 0x01000000 + extra.o-$(CONFIG_WALNUT) := openbios.o + extra.o-$(CONFIG_EV64260) := misc-ev64260.o end-$(CONFIG_EV64260) := ev64260 cacheflag-$(CONFIG_EV64260) := -include $(clear_L2_L3) @@ -168,7 +186,8 @@ OBJCOPY_ARGS := -O elf32-powerpc # head.o and relocate.o must be at the start. boot-y := head.o relocate.o $(extra.o-y) $(misc-y) -boot-$(CONFIG_40x) += embed_config.o +boot-$(CONFIG_REDWOOD_5) += embed_config.o +boot-$(CONFIG_REDWOOD_6) += embed_config.o boot-$(CONFIG_8xx) += embed_config.o boot-$(CONFIG_8260) += embed_config.o boot-$(CONFIG_BSEIP) += iic.o diff --git a/arch/ppc/boot/simple/misc.c b/arch/ppc/boot/simple/misc.c index e02de5b467a..f415d6c6236 100644 --- a/arch/ppc/boot/simple/misc.c +++ b/arch/ppc/boot/simple/misc.c @@ -23,7 +23,7 @@ #include #include #include -#ifdef CONFIG_44x +#ifdef CONFIG_4xx #include #endif #include @@ -88,6 +88,14 @@ get_mem_size(void) return 0; } +#if defined(CONFIG_40x) +#define PPC4xx_EMAC0_MR0 EMAC0_BASE +#endif + +#if defined(CONFIG_44x) && defined(PPC44x_EMAC0_MR0) +#define PPC4xx_EMAC0_MR0 PPC44x_EMAC0_MR0 +#endif + struct bi_record * decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum) { @@ -103,13 +111,13 @@ decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum) com_port = serial_init(0, NULL); #endif -#if defined(CONFIG_44x) && defined(PPC44x_EMAC0_MR0) +#if defined(PPC4xx_EMAC0_MR0) /* Reset MAL */ mtdcr(DCRN_MALCR(DCRN_MAL_BASE), MALCR_MMSR); /* Wait for reset */ while (mfdcr(DCRN_MALCR(DCRN_MAL_BASE)) & MALCR_MMSR) {}; /* Reset EMAC */ - *(volatile unsigned long *)PPC44x_EMAC0_MR0 = 0x20000000; + *(volatile unsigned long *)PPC4xx_EMAC0_MR0 = 0x20000000; __asm__ __volatile__("eieio"); #endif @@ -164,7 +172,9 @@ decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum) puts(" "); puthex((unsigned long)(&__ramdisk_end));puts("\n"); } +#ifndef CONFIG_40x /* don't overwrite the 40x image located at 0x00400000! */ avail_ram = (char *)0x00400000; +#endif end_avail = (char *)0x00800000; puts("avail ram: "); puthex((unsigned long)avail_ram); puts(" "); puthex((unsigned long)end_avail); puts("\n"); diff --git a/arch/ppc/boot/simple/openbios.c b/arch/ppc/boot/simple/openbios.c index c732b6d70cf..81f11d8b30a 100644 --- a/arch/ppc/boot/simple/openbios.c +++ b/arch/ppc/boot/simple/openbios.c @@ -1,19 +1,43 @@ /* * arch/ppc/boot/simple/openbios.c * - * 2005 (c) SYSGO AG - g.jaeger@sysgo.com + * Copyright (c) 2005 DENX Software Engineering + * Stefan Roese + * + * Based on original work by + * 2005 (c) SYSGO AG - g.jaeger@sysgo.com + * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without * any warranty of any kind, whether express or implied. * - * Derived from arch/ppc/boot/simple/pibs.c (from MontaVista) */ #include #include #include #include -#include +#include +#include +#ifdef CONFIG_40x +#include +#endif + +#if defined(CONFIG_BUBINGA) +#define BOARD_INFO_VECTOR 0xFFF80B50 /* openbios 1.19 moved this vector down - armin */ +#else +#define BOARD_INFO_VECTOR 0xFFFE0B50 +#endif + +#ifdef CONFIG_40x +/* Supply a default Ethernet address for those eval boards that don't + * ship with one. This is an address from the MBX board I have, so + * it is unlikely you will find it on your network. + */ +static ushort def_enet_addr[] = { 0x0800, 0x3e26, 0x1559 }; + +extern unsigned long timebase_period_ns; +#endif /* CONFIG_40x */ extern unsigned long decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum); @@ -23,15 +47,85 @@ extern unsigned long decompress_kernel(unsigned long load_addr, int num_words, bd_t hold_resid_buf __attribute__ ((__section__ (".data.boot"))); bd_t *hold_residual = &hold_resid_buf; +typedef struct openbios_board_info { + unsigned char bi_s_version[4]; /* Version of this structure */ + unsigned char bi_r_version[30]; /* Version of the IBM ROM */ + unsigned int bi_memsize; /* DRAM installed, in bytes */ +#ifdef CONFIG_405EP + unsigned char bi_enetaddr[2][6]; /* Local Ethernet MAC address */ +#else /* CONFIG_405EP */ + unsigned char bi_enetaddr[6]; /* Local Ethernet MAC address */ +#endif /* CONFIG_405EP */ + unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */ + unsigned int bi_intfreq; /* Processor speed, in Hz */ + unsigned int bi_busfreq; /* PLB Bus speed, in Hz */ + unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */ +#ifdef CONFIG_405EP + unsigned int bi_opb_busfreq; /* OPB Bus speed, in Hz */ + unsigned int bi_pllouta_freq; /* PLL OUTA speed, in Hz */ +#endif /* CONFIG_405EP */ +} openbios_bd_t; + void * load_kernel(unsigned long load_addr, int num_words, unsigned long cksum, void *ign1, void *ign2) { - decompress_kernel(load_addr, num_words, cksum); +#ifdef CONFIG_40x + openbios_bd_t *openbios_bd = NULL; + openbios_bd_t *(*get_board_info)(void) = + (openbios_bd_t *(*)(void))(*(unsigned long *)BOARD_INFO_VECTOR); + + /* + * On 40x platforms we not only need the MAC-addresses, but also the + * clocks and memsize. Now try to get all values using the OpenBIOS + * "get_board_info()" callback. + */ + if ((openbios_bd = get_board_info()) != NULL) { + /* + * Copy bd_info from OpenBIOS struct into U-Boot struct + * used by kernel + */ + hold_residual->bi_memsize = openbios_bd->bi_memsize; + hold_residual->bi_intfreq = openbios_bd->bi_intfreq; + hold_residual->bi_busfreq = openbios_bd->bi_busfreq; + hold_residual->bi_pci_busfreq = openbios_bd->bi_pci_busfreq; + memcpy(hold_residual->bi_pci_enetaddr, openbios_bd->bi_pci_enetaddr, 6); +#ifdef CONFIG_405EP + memcpy(hold_residual->bi_enetaddr, openbios_bd->bi_enetaddr[0], 6); + memcpy(hold_residual->bi_enet1addr, openbios_bd->bi_enetaddr[1], 6); + hold_residual->bi_opbfreq = openbios_bd->bi_opb_busfreq; + hold_residual->bi_procfreq = openbios_bd->bi_pllouta_freq; +#else /* CONFIG_405EP */ + memcpy(hold_residual->bi_enetaddr, openbios_bd->bi_enetaddr, 6); +#endif /* CONFIG_405EP */ + } else { + /* Hmmm...better try to stuff some defaults. + */ + hold_residual->bi_memsize = 16 * 1024 * 1024; + hold_residual->bi_intfreq = 200000000; + hold_residual->bi_busfreq = 100000000; + hold_residual->bi_pci_busfreq = 66666666; + + /* + * Only supply one mac-address in this fallback + */ + memcpy(hold_residual->bi_enetaddr, (void *)def_enet_addr, 6); +#ifdef CONFIG_405EP + hold_residual->bi_opbfreq = 50000000; + hold_residual->bi_procfreq = 200000000; +#endif /* CONFIG_405EP */ + } + timebase_period_ns = 1000000000 / hold_residual->bi_intfreq; +#endif /* CONFIG_40x */ + +#ifdef CONFIG_440GP /* simply copy the MAC addresses */ - memcpy(hold_residual->bi_enetaddr, (char *)EBONY_OPENBIOS_MAC_BASE, 6); - memcpy(hold_residual->bi_enet1addr, (char *)(EBONY_OPENBIOS_MAC_BASE+EBONY_OPENBIOS_MAC_OFFSET), 6); + memcpy(hold_residual->bi_enetaddr, (char *)OPENBIOS_MAC_BASE, 6); + memcpy(hold_residual->bi_enet1addr, (char *)(OPENBIOS_MAC_BASE+OPENBIOS_MAC_OFFSET), 6); +#endif /* CONFIG_440GP */ + + decompress_kernel(load_addr, num_words, cksum); return (void *)hold_residual; } diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig index e70e4c6ec78..d8837911bbc 100644 --- a/arch/ppc/platforms/4xx/Kconfig +++ b/arch/ppc/platforms/4xx/Kconfig @@ -225,7 +225,7 @@ config EMBEDDEDBOOT config IBM_OPENBIOS bool - depends on ASH || BUBINGA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT + depends on ASH || REDWOOD_5 || REDWOOD_6 default y config PPC4xx_DMA diff --git a/arch/ppc/platforms/4xx/bubinga.c b/arch/ppc/platforms/4xx/bubinga.c index 3678abf8631..8110f55668c 100644 --- a/arch/ppc/platforms/4xx/bubinga.c +++ b/arch/ppc/platforms/4xx/bubinga.c @@ -89,7 +89,7 @@ bubinga_early_serial_map(void) * by 16. */ uart_div = (mfdcr(DCRN_CPC0_UCR_BASE) & DCRN_CPC0_UCR_U0DIV); - uart_clock = __res.bi_pllouta_freq / uart_div; + uart_clock = __res.bi_procfreq / uart_div; /* Setup serial port access */ memset(&port, 0, sizeof(port)); diff --git a/arch/ppc/platforms/4xx/bubinga.h b/arch/ppc/platforms/4xx/bubinga.h index b1df856f8e2..b5380cfaf5c 100644 --- a/arch/ppc/platforms/4xx/bubinga.h +++ b/arch/ppc/platforms/4xx/bubinga.h @@ -1,52 +1,34 @@ /* - * Support for IBM PPC 405EP evaluation board (Bubinga). + * arch/ppc/platforms/4xx/bubinga.h * - * Author: SAW (IBM), derived from walnut.h. - * Maintained by MontaVista Software + * Bubinga board definitions + * + * Copyright (c) 2005 DENX Software Engineering + * Stefan Roese + * + * Based on original work by + * SAW (IBM) + * 2003 (c) MontaVista Softare Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. * - * 2003 (c) MontaVista Softare Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. */ #ifdef __KERNEL__ #ifndef __BUBINGA_H__ #define __BUBINGA_H__ -/* 405EP */ +#include #include - -#ifndef __ASSEMBLY__ -/* - * Data structure defining board information maintained by the boot - * ROM on IBM's evaluation board. An effort has been made to - * keep the field names consistent with the 8xx 'bd_t' board info - * structures. - */ - -typedef struct board_info { - unsigned char bi_s_version[4]; /* Version of this structure */ - unsigned char bi_r_version[30]; /* Version of the IBM ROM */ - unsigned int bi_memsize; /* DRAM installed, in bytes */ - unsigned char bi_enetaddr[2][6]; /* Local Ethernet MAC address */ unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */ - unsigned int bi_intfreq; /* Processor speed, in Hz */ - unsigned int bi_busfreq; /* PLB Bus speed, in Hz */ - unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */ - unsigned int bi_opb_busfreq; /* OPB Bus speed, in Hz */ - unsigned int bi_pllouta_freq; /* PLL OUTA speed, in Hz */ -} bd_t; - -/* Some 4xx parts use a different timebase frequency from the internal clock. -*/ -#define bi_tbfreq bi_intfreq - +#include /* Memory map for the Bubinga board. * Generic 4xx plus RTC. */ -extern void *bubinga_rtc_base; #define BUBINGA_RTC_PADDR ((uint)0xf0000000) #define BUBINGA_RTC_VADDR BUBINGA_RTC_PADDR #define BUBINGA_RTC_SIZE ((uint)8*1024) @@ -58,12 +40,18 @@ extern void *bubinga_rtc_base; * for typical configurations at various CPU speeds. * The base baud is calculated as (FWDA / EXT UART DIV / 16) */ -#define BASE_BAUD 0 +#define BASE_BAUD 0 -#define BUBINGA_FPGA_BASE 0xF0300000 +/* Flash */ +#define PPC40x_FPGA_BASE 0xF0300000 +#define PPC40x_FPGA_REG_OFFS 1 /* offset to flash map reg */ +#define PPC40x_FLASH_ONBD_N(x) (x & 0x02) +#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01) +#define PPC40x_FLASH_LOW 0xFFF00000 +#define PPC40x_FLASH_HIGH 0xFFF80000 +#define PPC40x_FLASH_SIZE 0x80000 -#define PPC4xx_MACHINE_NAME "IBM Bubinga" +#define PPC4xx_MACHINE_NAME "IBM Bubinga" -#endif /* !__ASSEMBLY__ */ #endif /* __BUBINGA_H__ */ #endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/4xx/ebony.h b/arch/ppc/platforms/4xx/ebony.h index d08faa46a0a..b91ad4272df 100644 --- a/arch/ppc/platforms/4xx/ebony.h +++ b/arch/ppc/platforms/4xx/ebony.h @@ -24,8 +24,8 @@ #define PPC44x_EMAC0_MR0 0xE0000800 /* Where to find the MAC info */ -#define EBONY_OPENBIOS_MAC_BASE 0xfffffe0c -#define EBONY_OPENBIOS_MAC_OFFSET 0x0c +#define OPENBIOS_MAC_BASE 0xfffffe0c +#define OPENBIOS_MAC_OFFSET 0x0c /* Default clock rates for Rev. B and Rev. C silicon */ #define EBONY_440GP_RB_SYSCLK 33000000 diff --git a/arch/ppc/platforms/4xx/sycamore.c b/arch/ppc/platforms/4xx/sycamore.c index d8019eec470..281b4a2ffb9 100644 --- a/arch/ppc/platforms/4xx/sycamore.c +++ b/arch/ppc/platforms/4xx/sycamore.c @@ -88,9 +88,6 @@ ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) void __init sycamore_setup_arch(void) { -#define SYCAMORE_PS2_BASE 0xF0100000 -#define SYCAMORE_FPGA_BASE 0xF0300000 - void *fpga_brdc; unsigned char fpga_brdc_data; void *fpga_enable; @@ -100,7 +97,7 @@ sycamore_setup_arch(void) ppc4xx_setup_arch(); - ibm_ocp_set_emac(0, 1); + ibm_ocp_set_emac(0, 0); kb_data = ioremap(SYCAMORE_PS2_BASE, 8); if (!kb_data) { @@ -111,7 +108,7 @@ sycamore_setup_arch(void) kb_cs = kb_data + 1; - fpga_status = ioremap(SYCAMORE_FPGA_BASE, 8); + fpga_status = ioremap(PPC40x_FPGA_BASE, 8); if (!fpga_status) { printk(KERN_CRIT "sycamore_setup_arch() fpga_status ioremap failed\n"); diff --git a/arch/ppc/platforms/4xx/sycamore.h b/arch/ppc/platforms/4xx/sycamore.h index 3e7b4e2c8c5..1cd6c824fd6 100644 --- a/arch/ppc/platforms/4xx/sycamore.h +++ b/arch/ppc/platforms/4xx/sycamore.h @@ -1,67 +1,52 @@ /* * arch/ppc/platforms/4xx/sycamore.h * - * Macros, definitions, and data structures specific to the IBM PowerPC - * 405GPr "Sycamore" evaluation board. + * Sycamore board definitions * - * Author: Armin Kuster + * Copyright (c) 2005 DENX Software Engineering + * Stefan Roese + * + * Based on original work by + * Armin Kuster + * 2000 (c) MontaVista, Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. * - * 2000 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. */ #ifdef __KERNEL__ #ifndef __ASM_SYCAMORE_H__ #define __ASM_SYCAMORE_H__ +#include #include +#include -#ifndef __ASSEMBLY__ -/* - * Data structure defining board information maintained by the boot - * ROM on IBM's "Sycamore" evaluation board. An effort has been made to - * keep the field names consistent with the 8xx 'bd_t' board info - * structures. - */ - -typedef struct board_info { - unsigned char bi_s_version[4]; /* Version of this structure */ - unsigned char bi_r_version[30]; /* Version of the IBM ROM */ - unsigned int bi_memsize; /* DRAM installed, in bytes */ - unsigned char bi_enetaddr[6]; /* Local Ethernet MAC address */ - unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */ - unsigned int bi_intfreq; /* Processor speed, in Hz */ - unsigned int bi_busfreq; /* PLB Bus speed, in Hz */ - unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */ -} bd_t; - -/* Some 4xx parts use a different timebase frequency from the internal clock. -*/ -#define bi_tbfreq bi_intfreq - - -/* Memory map for the IBM "Sycamore" 405GP evaluation board. +/* Memory map for the IBM "Sycamore" 405GPr evaluation board. * Generic 4xx plus RTC. */ -extern void *sycamore_rtc_base; #define SYCAMORE_RTC_PADDR ((uint)0xf0000000) #define SYCAMORE_RTC_VADDR SYCAMORE_RTC_PADDR -#define SYCAMORE_RTC_SIZE ((uint)8*1024) +#define SYCAMORE_RTC_SIZE ((uint)8*1024) -#ifdef CONFIG_PPC405GP_INTERNAL_CLOCK -#define BASE_BAUD 201600 -#else #define BASE_BAUD 691200 -#endif -#define SYCAMORE_PS2_BASE 0xF0100000 -#define SYCAMORE_FPGA_BASE 0xF0300000 +#define SYCAMORE_PS2_BASE 0xF0100000 + +/* Flash */ +#define PPC40x_FPGA_BASE 0xF0300000 +#define PPC40x_FPGA_REG_OFFS 5 /* offset to flash map reg */ +#define PPC40x_FLASH_ONBD_N(x) (x & 0x02) +#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01) +#define PPC40x_FLASH_LOW 0xFFF00000 +#define PPC40x_FLASH_HIGH 0xFFF80000 +#define PPC40x_FLASH_SIZE 0x80000 #define PPC4xx_MACHINE_NAME "IBM Sycamore" -#endif /* !__ASSEMBLY__ */ #endif /* __ASM_SYCAMORE_H__ */ #endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/4xx/walnut.c b/arch/ppc/platforms/4xx/walnut.c index a33eda4b748..74cb33182d9 100644 --- a/arch/ppc/platforms/4xx/walnut.c +++ b/arch/ppc/platforms/4xx/walnut.c @@ -90,7 +90,7 @@ walnut_setup_arch(void) kb_cs = kb_data + 1; - fpga_status = ioremap(WALNUT_FPGA_BASE, 8); + fpga_status = ioremap(PPC40x_FPGA_BASE, 8); if (!fpga_status) { printk(KERN_CRIT "walnut_setup_arch() fpga_status ioremap failed\n"); diff --git a/arch/ppc/platforms/4xx/walnut.h b/arch/ppc/platforms/4xx/walnut.h index 04cfbf3696b..dcf2691698c 100644 --- a/arch/ppc/platforms/4xx/walnut.h +++ b/arch/ppc/platforms/4xx/walnut.h @@ -1,72 +1,55 @@ /* * arch/ppc/platforms/4xx/walnut.h * - * Macros, definitions, and data structures specific to the IBM PowerPC - * 405GP "Walnut" evaluation board. + * Walnut board definitions * - * Authors: Grant Erickson , Frank Rowand - * , Debbie Chu or - * source@mvista.com + * Copyright (c) 2005 DENX Software Engineering + * Stefan Roese * - * Copyright (c) 1999 Grant Erickson + * Based on original work by + * Copyright (c) 1999 Grant Erickson + * Frank Rowand + * Debbie Chu + * 2000 (c) MontaVista, Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. * - * 2000 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. */ #ifdef __KERNEL__ #ifndef __ASM_WALNUT_H__ #define __ASM_WALNUT_H__ -/* We have a 405GP core */ +#include #include - -#ifndef __ASSEMBLY__ -/* - * Data structure defining board information maintained by the boot - * ROM on IBM's "Walnut" evaluation board. An effort has been made to - * keep the field names consistent with the 8xx 'bd_t' board info - * structures. - */ - -typedef struct board_info { - unsigned char bi_s_version[4]; /* Version of this structure */ - unsigned char bi_r_version[30]; /* Version of the IBM ROM */ - unsigned int bi_memsize; /* DRAM installed, in bytes */ - unsigned char bi_enetaddr[6]; /* Local Ethernet MAC address */ - unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */ - unsigned int bi_intfreq; /* Processor speed, in Hz */ - unsigned int bi_busfreq; /* PLB Bus speed, in Hz */ - unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */ -} bd_t; - -/* Some 4xx parts use a different timebase frequency from the internal clock. -*/ -#define bi_tbfreq bi_intfreq - +#include /* Memory map for the IBM "Walnut" 405GP evaluation board. * Generic 4xx plus RTC. */ -extern void *walnut_rtc_base; #define WALNUT_RTC_PADDR ((uint)0xf0000000) #define WALNUT_RTC_VADDR WALNUT_RTC_PADDR #define WALNUT_RTC_SIZE ((uint)8*1024) -#ifdef CONFIG_PPC405GP_INTERNAL_CLOCK -#define BASE_BAUD 201600 -#else #define BASE_BAUD 691200 -#endif #define WALNUT_PS2_BASE 0xF0100000 -#define WALNUT_FPGA_BASE 0xF0300000 + +/* Flash */ +#define PPC40x_FPGA_BASE 0xF0300000 +#define PPC40x_FPGA_REG_OFFS 5 /* offset to flash map reg */ +#define PPC40x_FLASH_ONBD_N(x) (x & 0x02) +#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01) +#define PPC40x_FLASH_LOW 0xFFF00000 +#define PPC40x_FLASH_HIGH 0xFFF80000 +#define PPC40x_FLASH_SIZE 0x80000 +#define WALNUT_FPGA_BASE PPC40x_FPGA_BASE #define PPC4xx_MACHINE_NAME "IBM Walnut" -#endif /* !__ASSEMBLY__ */ #endif /* __ASM_WALNUT_H__ */ #endif /* __KERNEL__ */ -- cgit v1.2.3 From 7869ec6d735e3802f0d442f585ae6bb7633222f6 Mon Sep 17 00:00:00 2001 From: Matt Porter Date: Mon, 7 Nov 2005 00:58:16 -0800 Subject: [PATCH] ppc32: Remove internal PCI arbiter check on PPC40x On PPC405GP/GPR it should be possible to enable PCI support, even when the internal PCI arbiter is disabled (e.g. when using an external PCI arbiter). The removed code didn't allow this, and also generated a warning on PPC405EP platforms. Signed-off-by: Stefan Roese Signed-off-by: Matt Porter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/syslib/ppc405_pci.c | 7 ------- 1 file changed, 7 deletions(-) (limited to 'arch') diff --git a/arch/ppc/syslib/ppc405_pci.c b/arch/ppc/syslib/ppc405_pci.c index 81c83bf98df..d6d838b16da 100644 --- a/arch/ppc/syslib/ppc405_pci.c +++ b/arch/ppc/syslib/ppc405_pci.c @@ -89,13 +89,6 @@ ppc4xx_find_bridges(void) isa_mem_base = 0; pci_dram_offset = 0; -#if (PSR_PCI_ARBIT_EN > 1) - /* Check if running in slave mode */ - if ((mfdcr(DCRN_CHPSR) & PSR_PCI_ARBIT_EN) == 0) { - printk("Running as PCI slave, kernel PCI disabled !\n"); - return; - } -#endif /* Setup PCI32 hose */ hose_a = pcibios_alloc_controller(); if (!hose_a) -- cgit v1.2.3 From 634e67ff917c079b102317d53556d758dc207969 Mon Sep 17 00:00:00 2001 From: Matt Porter Date: Mon, 7 Nov 2005 00:58:16 -0800 Subject: [PATCH] ppc32: Add missing initrd header on ppc440 This missing initrd header slipped though last time. Signed-off-by: Stefan Roese Signed-off-by: Matt Porter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/syslib/ibm44x_common.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/ppc/syslib/ibm44x_common.c b/arch/ppc/syslib/ibm44x_common.c index a5bef9d163a..71db11d2215 100644 --- a/arch/ppc/syslib/ibm44x_common.c +++ b/arch/ppc/syslib/ibm44x_common.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include -- cgit v1.2.3 From de672e4ade25502c28486da005be3eb79534017d Mon Sep 17 00:00:00 2001 From: Pantelis Antoniou Date: Mon, 7 Nov 2005 00:58:17 -0800 Subject: [PATCH] ppc32: Add CPM1 config option Kconfig patch needed by fs_enet to work. Works like CONFIG_CPM2. Cc: Kumar Cc: Benjamin Herrenschmidt Cc: Matt Porter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/Kconfig | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index 114b90fdea2..f8db33d5527 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -746,6 +746,16 @@ config MPC834x bool default y if MPC834x_SYS +config CPM1 + bool + depends on 8xx + default y + help + The CPM1 (Communications Processor Module) is a coprocessor on + embedded CPUs made by Motorola. Selecting this option means that + you wish to build a kernel for a machine with a CPM1 coprocessor + on it (8xx, 827x, 8560). + config CPM2 bool depends on 8260 || MPC8560 || MPC8555 -- cgit v1.2.3 From 72777373b3a09c9132a787d5e1e03eaf64f30a64 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 7 Nov 2005 00:58:20 -0800 Subject: [PATCH] sh: Drop deprecated support for custom ramdisk embedding sh had its own support for embedding ramdisk images in to the kernel binary, but people are using initramfs for this now, so we drop the ramdisk embedding. Signed-off-by: Paul Mundt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/sh/Kconfig | 18 ------------------ arch/sh/Makefile | 8 -------- arch/sh/ramdisk/Makefile | 20 -------------------- arch/sh/ramdisk/ld.script | 9 --------- 4 files changed, 55 deletions(-) delete mode 100644 arch/sh/ramdisk/Makefile delete mode 100644 arch/sh/ramdisk/ld.script (limited to 'arch') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 3e804c736e6..7d31d628cde 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -770,24 +770,6 @@ source "fs/Kconfig.binfmt" endmenu -menu "SH initrd options" - depends on BLK_DEV_INITRD - -config EMBEDDED_RAMDISK - bool "Embed root filesystem ramdisk into the kernel" - -config EMBEDDED_RAMDISK_IMAGE - string "Filename of gziped ramdisk image" - depends on EMBEDDED_RAMDISK - default "ramdisk.gz" - help - This is the filename of the ramdisk image to be built into the - kernel. Relative pathnames are relative to arch/sh/ramdisk/. - The ramdisk image is not part of the kernel distribution; you must - provide one yourself. - -endmenu - source "net/Kconfig" source "drivers/Kconfig" diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 4a3049080b4..67192d6b00d 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -60,14 +60,6 @@ LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name) core-y += arch/sh/kernel/ arch/sh/mm/ -# -# ramdisk/initrd support -# You need a compressed ramdisk image, named -# CONFIG_EMBEDDED_RAMDISK_IMAGE. Relative pathnames -# are relative to arch/sh/ramdisk/. -# -core-$(CONFIG_EMBEDDED_RAMDISK) += arch/sh/ramdisk/ - # Boards machdir-$(CONFIG_SH_SOLUTION_ENGINE) := se/770x machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) := se/7751 diff --git a/arch/sh/ramdisk/Makefile b/arch/sh/ramdisk/Makefile deleted file mode 100644 index 99e1c68673c..00000000000 --- a/arch/sh/ramdisk/Makefile +++ /dev/null @@ -1,20 +0,0 @@ -# -# Makefile for a ramdisk image -# - -obj-y += ramdisk.o - - -O_FORMAT = $(shell $(OBJDUMP) -i | head -n 2 | grep elf32) -img := $(subst ",,$(CONFIG_EMBEDDED_RAMDISK_IMAGE)) -# add $(src) when $(img) is relative -img := $(subst $(src)//,/,$(src)/$(img)) - -quiet_cmd_ramdisk = LD $@ -define cmd_ramdisk - $(LD) -T $(srctree)/$(src)/ld.script -b binary --oformat $(O_FORMAT) \ - -o $@ $(img) -endef - -$(obj)/ramdisk.o: $(img) $(srctree)/$(src)/ld.script - $(call cmd,ramdisk) diff --git a/arch/sh/ramdisk/ld.script b/arch/sh/ramdisk/ld.script deleted file mode 100644 index 94beee248c0..00000000000 --- a/arch/sh/ramdisk/ld.script +++ /dev/null @@ -1,9 +0,0 @@ -OUTPUT_ARCH(sh) -SECTIONS -{ - .initrd : - { - *(.data) - } -} - -- cgit v1.2.3 From d5cb9783536a41df9f9cba5b0a1d78047ed787f7 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 7 Nov 2005 00:58:22 -0800 Subject: [PATCH] sh: SuperHyway support for SH4-202 This adds support for the relatively quirky (ie, not in line with any known documentation, and amazed it works at all) SuperHyway implementation on SH4-202. This depends on the earlier SuperHyway patch for multiple block support and VCR refactoring. Signed-off-by: Paul Mundt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/sh/drivers/Makefile | 5 +- arch/sh/drivers/superhyway/Makefile | 6 ++ arch/sh/drivers/superhyway/ops-sh4-202.c | 171 +++++++++++++++++++++++++++++++ 3 files changed, 180 insertions(+), 2 deletions(-) create mode 100644 arch/sh/drivers/superhyway/Makefile create mode 100644 arch/sh/drivers/superhyway/ops-sh4-202.c (limited to 'arch') diff --git a/arch/sh/drivers/Makefile b/arch/sh/drivers/Makefile index bd6726cde39..338c3729d27 100644 --- a/arch/sh/drivers/Makefile +++ b/arch/sh/drivers/Makefile @@ -2,6 +2,7 @@ # Makefile for the Linux SuperH-specific device drivers. # -obj-$(CONFIG_PCI) += pci/ -obj-$(CONFIG_SH_DMA) += dma/ +obj-$(CONFIG_PCI) += pci/ +obj-$(CONFIG_SH_DMA) += dma/ +obj-$(CONFIG_SUPERHYWAY) += superhyway/ diff --git a/arch/sh/drivers/superhyway/Makefile b/arch/sh/drivers/superhyway/Makefile new file mode 100644 index 00000000000..5b8e0c7ca3a --- /dev/null +++ b/arch/sh/drivers/superhyway/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the SuperHyway specific kernel interface routines under Linux. +# + +obj-$(CONFIG_CPU_SUBTYPE_SH4_202) += ops-sh4-202.o + diff --git a/arch/sh/drivers/superhyway/ops-sh4-202.c b/arch/sh/drivers/superhyway/ops-sh4-202.c new file mode 100644 index 00000000000..a55c98a9052 --- /dev/null +++ b/arch/sh/drivers/superhyway/ops-sh4-202.c @@ -0,0 +1,171 @@ +/* + * arch/sh/drivers/superhyway/ops-sh4-202.c + * + * SuperHyway bus support for SH4-202 + * + * Copyright (C) 2005 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU + * General Public License. See the file "COPYING" in the main + * directory of this archive for more details. + */ +#include +#include +#include +#include +#include +#include + +#define PHYS_EMI_CBLOCK P4SEGADDR(0x1ec00000) +#define PHYS_EMI_DBLOCK P4SEGADDR(0x08000000) +#define PHYS_FEMI_CBLOCK P4SEGADDR(0x1f800000) +#define PHYS_FEMI_DBLOCK P4SEGADDR(0x00000000) + +#define PHYS_EPBR_BLOCK P4SEGADDR(0x1de00000) +#define PHYS_DMAC_BLOCK P4SEGADDR(0x1fa00000) +#define PHYS_PBR_BLOCK P4SEGADDR(0x1fc00000) + +static struct resource emi_resources[] = { + [0] = { + .start = PHYS_EMI_CBLOCK, + .end = PHYS_EMI_CBLOCK + 0x00300000 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PHYS_EMI_DBLOCK, + .end = PHYS_EMI_DBLOCK + 0x08000000 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct superhyway_device emi_device = { + .name = "emi", + .num_resources = ARRAY_SIZE(emi_resources), + .resource = emi_resources, +}; + +static struct resource femi_resources[] = { + [0] = { + .start = PHYS_FEMI_CBLOCK, + .end = PHYS_FEMI_CBLOCK + 0x00100000 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PHYS_FEMI_DBLOCK, + .end = PHYS_FEMI_DBLOCK + 0x08000000 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct superhyway_device femi_device = { + .name = "femi", + .num_resources = ARRAY_SIZE(femi_resources), + .resource = femi_resources, +}; + +static struct resource epbr_resources[] = { + [0] = { + .start = P4SEGADDR(0x1e7ffff8), + .end = P4SEGADDR(0x1e7ffff8 + (sizeof(u32) * 2) - 1), + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PHYS_EPBR_BLOCK, + .end = PHYS_EPBR_BLOCK + 0x00a00000 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct superhyway_device epbr_device = { + .name = "epbr", + .num_resources = ARRAY_SIZE(epbr_resources), + .resource = epbr_resources, +}; + +static struct resource dmac_resource = { + .start = PHYS_DMAC_BLOCK, + .end = PHYS_DMAC_BLOCK + 0x00100000 - 1, + .flags = IORESOURCE_MEM, +}; + +static struct superhyway_device dmac_device = { + .name = "dmac", + .num_resources = 1, + .resource = &dmac_resource, +}; + +static struct resource pbr_resources[] = { + [0] = { + .start = P4SEGADDR(0x1ffffff8), + .end = P4SEGADDR(0x1ffffff8 + (sizeof(u32) * 2) - 1), + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PHYS_PBR_BLOCK, + .end = PHYS_PBR_BLOCK + 0x00400000 - (sizeof(u32) * 2) - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct superhyway_device pbr_device = { + .name = "pbr", + .num_resources = ARRAY_SIZE(pbr_resources), + .resource = pbr_resources, +}; + +static struct superhyway_device *sh4202_devices[] __initdata = { + &emi_device, &femi_device, &epbr_device, &dmac_device, &pbr_device, +}; + +static int sh4202_read_vcr(unsigned long base, struct superhyway_vcr_info *vcr) +{ + u32 vcrh, vcrl; + u64 tmp; + + /* + * XXX: Even though the SH4-202 Evaluation Device documentation + * indicates that VCRL is mapped first with VCRH at a + 0x04 + * offset, the opposite seems to be true. + * + * Some modules (PBR and ePBR for instance) also appear to have + * VCRL/VCRH flipped in the documentation, but on the SH4-202 + * itself it appears that these are all consistently mapped with + * VCRH preceeding VCRL. + * + * Do not trust the documentation, for it is evil. + */ + vcrh = ctrl_inl(base); + vcrl = ctrl_inl(base + sizeof(u32)); + + tmp = ((u64)vcrh << 32) | vcrl; + memcpy(vcr, &tmp, sizeof(u64)); + + return 0; +} + +static int sh4202_write_vcr(unsigned long base, struct superhyway_vcr_info vcr) +{ + u64 tmp = *(u64 *)&vcr; + + ctrl_outl((tmp >> 32) & 0xffffffff, base); + ctrl_outl(tmp & 0xffffffff, base + sizeof(u32)); + + return 0; +} + +static struct superhyway_ops sh4202_superhyway_ops = { + .read_vcr = sh4202_read_vcr, + .write_vcr = sh4202_write_vcr, +}; + +struct superhyway_bus superhyway_channels[] = { + { &sh4202_superhyway_ops, }, + { 0, }, +}; + +int __init superhyway_scan_bus(struct superhyway_bus *bus) +{ + return superhyway_add_devices(bus, sh4202_devices, + ARRAY_SIZE(sh4202_devices)); +} + -- cgit v1.2.3 From 65463b73b14ed43368dc5961a6c3dcb0d98cfe1f Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 7 Nov 2005 00:58:24 -0800 Subject: [PATCH] sh: Drop hp690 discontig support There was only one board using this (hp690 specifically), and it just so happens that it's only physically discontiguous at the "normal" P1 offset. If we bump up the P1 offset, it's possible to hit a shadowed region of memory where we suddenly become magically contiguous. As people have been using this shadowed region workaround for quite some time (and without any adverse effects), it's time to drop the left over discontig bits that no longer have any practical use (it was always very much hp690-centric to begin with). Signed-off-by: Paul Mundt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/sh/Kconfig | 10 ---------- arch/sh/kernel/setup.c | 26 +++++++------------------- arch/sh/mm/init.c | 21 ++------------------- 3 files changed, 9 insertions(+), 48 deletions(-) (limited to 'arch') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 7d31d628cde..64f5ae0ff96 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -490,16 +490,6 @@ config CPU_SUBTYPE_ST40 depends on CPU_SUBTYPE_ST40STB1 || CPU_SUBTYPE_ST40GX1 default y -config ARCH_DISCONTIGMEM_ENABLE - bool - depends on SH_HP690 - default y - help - Say Y to upport efficient handling of discontiguous physical memory, - for architectures which are either NUMA (Non-Uniform Memory Access) - or have huge holes in the physical address space for other reasons. - See for more. - source "mm/Kconfig" config ZERO_PAGE_OFFSET diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 25b9d9ebe85..036050b377c 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -83,9 +83,9 @@ static struct sh_machine_vector* __init get_mv_byname(const char* name); /* ... */ #define COMMAND_LINE ((char *) (PARAM+0x100)) -#define RAMDISK_IMAGE_START_MASK 0x07FF +#define RAMDISK_IMAGE_START_MASK 0x07FF #define RAMDISK_PROMPT_FLAG 0x8000 -#define RAMDISK_LOAD_FLAG 0x4000 +#define RAMDISK_LOAD_FLAG 0x4000 static char command_line[COMMAND_LINE_SIZE] = { 0, }; @@ -284,18 +284,6 @@ void __init setup_arch(char **cmdline_p) #define PFN_DOWN(x) ((x) >> PAGE_SHIFT) #define PFN_PHYS(x) ((x) << PAGE_SHIFT) -#ifdef CONFIG_DISCONTIGMEM - NODE_DATA(0)->bdata = &discontig_node_bdata[0]; - NODE_DATA(1)->bdata = &discontig_node_bdata[1]; - - bootmap_size = init_bootmem_node(NODE_DATA(1), - PFN_UP(__MEMORY_START_2ND), - PFN_UP(__MEMORY_START_2ND), - PFN_DOWN(__MEMORY_START_2ND+__MEMORY_SIZE_2ND)); - free_bootmem_node(NODE_DATA(1), __MEMORY_START_2ND, __MEMORY_SIZE_2ND); - reserve_bootmem_node(NODE_DATA(1), __MEMORY_START_2ND, bootmap_size); -#endif - /* * Find the highest page frame number we have available */ @@ -306,10 +294,10 @@ void __init setup_arch(char **cmdline_p) */ max_low_pfn = max_pfn; - /* + /* * Partially used pages are not usable - thus * we are rounding upwards: - */ + */ start_pfn = PFN_UP(__pa(_end)); /* @@ -360,12 +348,12 @@ void __init setup_arch(char **cmdline_p) reserve_bootmem_node(NODE_DATA(0), __MEMORY_START, PAGE_SIZE); #ifdef CONFIG_BLK_DEV_INITRD - ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0); - if (&__rd_start != &__rd_end) { + ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0); + if (&__rd_start != &__rd_end) { LOADER_TYPE = 1; INITRD_START = PHYSADDR((unsigned long)&__rd_start) - __MEMORY_START; INITRD_SIZE = (unsigned long)&__rd_end - (unsigned long)&__rd_start; - } + } if (LOADER_TYPE && INITRD_START) { if (INITRD_START + INITRD_SIZE <= (max_low_pfn << PAGE_SHIFT)) { diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c index 4e9c854845a..e342565f75f 100644 --- a/arch/sh/mm/init.c +++ b/arch/sh/mm/init.c @@ -51,11 +51,6 @@ unsigned long mmu_context_cache = NO_CONTEXT; #define MAX_LOW_PFN (NODE_DATA(0)->bdata->node_low_pfn) #endif -#ifdef CONFIG_DISCONTIGMEM -pg_data_t discontig_page_data[MAX_NUMNODES]; -bootmem_data_t discontig_node_bdata[MAX_NUMNODES]; -#endif - void (*copy_page)(void *from, void *to); void (*clear_page)(void *to); @@ -216,15 +211,6 @@ void __init paging_init(void) #endif NODE_DATA(0)->node_mem_map = NULL; free_area_init_node(0, NODE_DATA(0), zones_size, __MEMORY_START >> PAGE_SHIFT, 0); - -#ifdef CONFIG_DISCONTIGMEM - /* - * And for discontig, do some more fixups on the zone sizes.. - */ - zones_size[ZONE_DMA] = __MEMORY_SIZE_2ND >> PAGE_SHIFT; - zones_size[ZONE_NORMAL] = 0; - free_area_init_node(1, NODE_DATA(1), zones_size, __MEMORY_START_2ND >> PAGE_SHIFT, 0); -#endif } void __init mem_init(void) @@ -248,7 +234,7 @@ void __init mem_init(void) memset(empty_zero_page, 0, PAGE_SIZE); __flush_wback_region(empty_zero_page, PAGE_SIZE); - /* + /* * Setup wrappers for copy/clear_page(), these will get overridden * later in the boot process if a better method is available. */ @@ -257,9 +243,6 @@ void __init mem_init(void) /* this will put all low memory onto the freelists */ totalram_pages += free_all_bootmem_node(NODE_DATA(0)); -#ifdef CONFIG_DISCONTIGMEM - totalram_pages += free_all_bootmem_node(NODE_DATA(1)); -#endif reservedpages = 0; for (tmp = 0; tmp < num_physpages; tmp++) /* @@ -286,7 +269,7 @@ void __init mem_init(void) void free_initmem(void) { unsigned long addr; - + addr = (unsigned long)(&__init_begin); for (; addr < (unsigned long)(&__init_end); addr += PAGE_SIZE) { ClearPageReserved(virt_to_page(addr)); -- cgit v1.2.3 From 0d6d82b6712c808e461090dd483f111f72b3b38b Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 7 Nov 2005 00:58:28 -0800 Subject: [PATCH] sh: Use pfn_valid() for lazy dcache write-back on SH7705 SH7705 in extended cache mode has some left-over VALID_PAGE() cruft that it checks when doing lazy dcache write-back. This has been gone for some time (the last bits were in the discontig code, which should now also be gone -- this also fixes up a build error in the non-discontig case). pfn_valid() gives the desired behaviour, so we switch to that. Signed-off-by: Paul Mundt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/sh/mm/tlb-sh3.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/sh/mm/tlb-sh3.c b/arch/sh/mm/tlb-sh3.c index 7a0d5c10bf2..46b09e26e08 100644 --- a/arch/sh/mm/tlb-sh3.c +++ b/arch/sh/mm/tlb-sh3.c @@ -40,12 +40,17 @@ void update_mmu_cache(struct vm_area_struct * vma, return; #if defined(CONFIG_SH7705_CACHE_32KB) - struct page *page; - page = pte_page(pte); - if (VALID_PAGE(page) && !test_bit(PG_mapped, &page->flags)) { - unsigned long phys = pte_val(pte) & PTE_PHYS_MASK; - __flush_wback_region((void *)P1SEGADDR(phys), PAGE_SIZE); - __set_bit(PG_mapped, &page->flags); + { + struct page *page = pte_page(pte); + unsigned long pfn = pte_pfn(pte); + + if (pfn_valid(pfn) && !test_bit(PG_mapped, &page->flags)) { + unsigned long phys = pte_val(pte) & PTE_PHYS_MASK; + + __flush_wback_region((void *)P1SEGADDR(phys), + PAGE_SIZE); + __set_bit(PG_mapped, &page->flags); + } } #endif @@ -80,7 +85,7 @@ void __flush_tlb_page(unsigned long asid, unsigned long page) */ addr = MMU_TLB_ADDRESS_ARRAY | (page & 0x1F000); data = (page & 0xfffe0000) | asid; /* VALID bit is off */ - + if ((cpu_data->flags & CPU_HAS_MMU_PAGE_ASSOC)) { addr |= MMU_PAGE_ASSOC_BIT; ways = 1; /* we already know the way .. */ -- cgit v1.2.3 From 38e548ee1a79c8da7b3d9e26f2adce9b61413f84 Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Mon, 7 Nov 2005 00:58:31 -0800 Subject: [PATCH] arch/i386: Use ARRAY_SIZE macro Use ARRAY_SIZE macro instead of sizeof(x)/sizeof(x[0]) Signed-off-by: Tobias Klauser Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/apm.c | 5 ++--- arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c | 2 +- arch/i386/kernel/mca.c | 2 +- arch/i386/kernel/reboot_fixups.c | 2 +- arch/i386/kernel/smpboot.c | 2 +- 5 files changed, 6 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/apm.c b/arch/i386/kernel/apm.c index d2ef0c2aa93..86e80c55147 100644 --- a/arch/i386/kernel/apm.c +++ b/arch/i386/kernel/apm.c @@ -447,8 +447,7 @@ static char * apm_event_name[] = { "system standby resume", "capabilities change" }; -#define NR_APM_EVENT_NAME \ - (sizeof(apm_event_name) / sizeof(apm_event_name[0])) +#define NR_APM_EVENT_NAME ARRAY_SIZE(apm_event_name) typedef struct lookup_t { int key; @@ -479,7 +478,7 @@ static const lookup_t error_table[] = { { APM_NO_ERROR, "BIOS did not set a return code" }, { APM_NOT_PRESENT, "No APM present" } }; -#define ERROR_COUNT (sizeof(error_table)/sizeof(lookup_t)) +#define ERROR_COUNT ARRAY_SIZE(error_table) /** * apm_error - display an APM error diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c index 1465974256c..0ea010a7afb 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c @@ -67,7 +67,7 @@ static const struct cpu_id cpu_ids[] = { [CPU_MP4HT_D0] = {15, 3, 4 }, [CPU_MP4HT_E0] = {15, 4, 1 }, }; -#define N_IDS (sizeof(cpu_ids)/sizeof(cpu_ids[0])) +#define N_IDS ARRAY_SIZE(cpu_ids) struct cpu_model { diff --git a/arch/i386/kernel/mca.c b/arch/i386/kernel/mca.c index 8600faeea29..558bb207720 100644 --- a/arch/i386/kernel/mca.c +++ b/arch/i386/kernel/mca.c @@ -132,7 +132,7 @@ static struct resource mca_standard_resources[] = { { .start = 0x100, .end = 0x107, .name = "POS (MCA)" } }; -#define MCA_STANDARD_RESOURCES (sizeof(mca_standard_resources)/sizeof(struct resource)) +#define MCA_STANDARD_RESOURCES ARRAY_SIZE(mca_standard_resources) /** * mca_read_and_store_pos - read the POS registers into a memory buffer diff --git a/arch/i386/kernel/reboot_fixups.c b/arch/i386/kernel/reboot_fixups.c index c9b87330aee..6f73c9ea4e3 100644 --- a/arch/i386/kernel/reboot_fixups.c +++ b/arch/i386/kernel/reboot_fixups.c @@ -42,7 +42,7 @@ void mach_reboot_fixups(void) struct pci_dev *dev; int i; - for (i=0; i < (sizeof(fixups_table)/sizeof(fixups_table[0])); i++) { + for (i=0; i < ARRAY_SIZE(fixups_table); i++) { cur = &(fixups_table[i]); dev = pci_get_device(cur->vendor, cur->device, NULL); if (!dev) diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index 01b618e73ec..e6488ffc1f7 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -612,7 +612,7 @@ static inline void __inquire_remote_apic(int apicid) printk("Inquiring remote APIC #%d...\n", apicid); - for (i = 0; i < sizeof(regs) / sizeof(*regs); i++) { + for (i = 0; i < ARRAY_SIZE(regs); i++) { printk("... APIC #%d %s: ", apicid, names[i]); /* -- cgit v1.2.3 From 77f72b192fd4624ad639dbf60c48be787c8aea59 Mon Sep 17 00:00:00 2001 From: Zwane Mwaikambo Date: Mon, 7 Nov 2005 00:58:33 -0800 Subject: [PATCH] i386: LVT entries remaining unmasked on reboot Excerpt from bugzilla entry http://bugzilla.kernel.org/show_bug.cgi?id=5518 "i386 version of Reboot-through-BIOS is unsafe: it forgets to mask APIC LVT interrupts before jumping to a BIOS entry point. As a result, BIOS ends up bombarded with interrupts early on boot. The BIOS does not expect it since following a "normal" hardware cpu reset, all APIC LVT registers have the Mask bit (16) set and can't generate interrupts. For example, the version of Phoenix BIOS used by VMware enables interrupts for the first time before masking/clearing APIC LVT. The APIC Timer LVT register is still set up for a timer interrupt delivery with a high vector from the previous Linux incarnation (0xef in our case). The BIOS has not fully initialized its IDT at this point and the real mode gate for 0xef remains all zeros. Vector 0xef dispatches BIOS to address 0:0, BIOS takes a #GP and eventually hangs. machine_shutdown() does attempt to shut down APIC before jumping to BIOS, but it is ineffective" Signed-off-by: Zwane Mwaikambo Cc: "Seth, Rohit" Cc: Zachary Amsden Cc: "Eric W. Biederman" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/apic.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c index 7c724ffa08b..496a2c9909f 100644 --- a/arch/i386/kernel/apic.c +++ b/arch/i386/kernel/apic.c @@ -559,14 +559,20 @@ void __devinit setup_local_APIC(void) * If Linux enabled the LAPIC against the BIOS default * disable it down before re-entering the BIOS on shutdown. * Otherwise the BIOS may get confused and not power-off. + * Additionally clear all LVT entries before disable_local_APIC + * for the case where Linux didn't enable the LAPIC. */ void lapic_shutdown(void) { - if (!cpu_has_apic || !enabled_via_apicbase) + if (!cpu_has_apic) return; local_irq_disable(); - disable_local_APIC(); + clear_local_APIC(); + + if (enabled_via_apicbase) + disable_local_APIC(); + local_irq_enable(); } -- cgit v1.2.3 From 8d1ed6366b9f3cb54eb5aef5dae79b39b8d5ce43 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 7 Nov 2005 00:58:35 -0800 Subject: [PATCH] arch/i386/kernel/ldt.c should #include Every file should #include the header files containing the prototypes of its global functions Signed-off-by: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/ldt.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/i386/kernel/ldt.c b/arch/i386/kernel/ldt.c index fe1ffa55587..983f95707e1 100644 --- a/arch/i386/kernel/ldt.c +++ b/arch/i386/kernel/ldt.c @@ -18,6 +18,7 @@ #include #include #include +#include #ifdef CONFIG_SMP /* avoids "defined but not used" warnig */ static void flush_ldt(void *null) -- cgit v1.2.3 From 5cc6135af73ad0c7897d1d00ff361e510ac23ccb Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 7 Nov 2005 00:58:36 -0800 Subject: [PATCH] arch/i386/kernel/reboot_fixups.c should #include Every file should #include the header files containing the prototypes of its global functions Signed-off-by: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/reboot_fixups.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/i386/kernel/reboot_fixups.c b/arch/i386/kernel/reboot_fixups.c index 6f73c9ea4e3..10e21a4773d 100644 --- a/arch/i386/kernel/reboot_fixups.c +++ b/arch/i386/kernel/reboot_fixups.c @@ -10,6 +10,7 @@ #include #include +#include static void cs5530a_warm_reset(struct pci_dev *dev) { -- cgit v1.2.3 From cc658cfe3c66a6124b5a8db90cdcdd440201b1dc Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 7 Nov 2005 00:58:37 -0800 Subject: [PATCH] arch/i386/kernel/scx200.c should #include Every file should #include the header files containing the prototypes of its global functions Signed-off-by: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/scx200.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/i386/kernel/scx200.c b/arch/i386/kernel/scx200.c index 69e203a0d33..9c968ae67c4 100644 --- a/arch/i386/kernel/scx200.c +++ b/arch/i386/kernel/scx200.c @@ -12,6 +12,7 @@ #include #include +#include /* Verify that the configuration block really is there */ #define scx200_cb_probe(base) (inw((base) + SCx200_CBA) == (base)) -- cgit v1.2.3 From 31ab269a0307d8725737dfbbdeb5dcde7b41bc36 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Mon, 7 Nov 2005 00:58:42 -0800 Subject: [PATCH] x86: add MCE resume It's widely seen a MCE non-fatal error reported after resume. It seems MCE resume is lacked under ia32. This patch tries to fix the gap. Signed-off-by: Shaohua Li Acked-by: Pavel Machek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/cpu/common.c | 5 +---- arch/i386/kernel/cpu/mcheck/k7.c | 2 +- arch/i386/kernel/cpu/mcheck/mce.c | 4 ++-- arch/i386/kernel/cpu/mcheck/p4.c | 4 ++-- arch/i386/kernel/cpu/mcheck/p5.c | 2 +- arch/i386/kernel/cpu/mcheck/p6.c | 2 +- arch/i386/kernel/cpu/mcheck/winchip.c | 2 +- arch/i386/power/cpu.c | 1 + 8 files changed, 10 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c index 74145a33cb0..c145fb30002 100644 --- a/arch/i386/kernel/cpu/common.c +++ b/arch/i386/kernel/cpu/common.c @@ -30,8 +30,6 @@ static int disable_x86_serial_nr __devinitdata = 1; struct cpu_dev * cpu_devs[X86_VENDOR_NUM] = {}; -extern void mcheck_init(struct cpuinfo_x86 *c); - extern int disable_pse; static void default_init(struct cpuinfo_x86 * c) @@ -429,9 +427,8 @@ void __devinit identify_cpu(struct cpuinfo_x86 *c) } /* Init Machine Check Exception if available. */ -#ifdef CONFIG_X86_MCE mcheck_init(c); -#endif + if (c == &boot_cpu_data) sysenter_setup(); enable_sep_cpu(); diff --git a/arch/i386/kernel/cpu/mcheck/k7.c b/arch/i386/kernel/cpu/mcheck/k7.c index 7c6b9c73522..fc5d5215e23 100644 --- a/arch/i386/kernel/cpu/mcheck/k7.c +++ b/arch/i386/kernel/cpu/mcheck/k7.c @@ -68,7 +68,7 @@ static fastcall void k7_machine_check(struct pt_regs * regs, long error_code) /* AMD K7 machine check is Intel like */ -void __devinit amd_mcheck_init(struct cpuinfo_x86 *c) +void amd_mcheck_init(struct cpuinfo_x86 *c) { u32 l, h; int i; diff --git a/arch/i386/kernel/cpu/mcheck/mce.c b/arch/i386/kernel/cpu/mcheck/mce.c index 2cf25d2ba0f..6170af3c271 100644 --- a/arch/i386/kernel/cpu/mcheck/mce.c +++ b/arch/i386/kernel/cpu/mcheck/mce.c @@ -16,7 +16,7 @@ #include "mce.h" -int mce_disabled __devinitdata = 0; +int mce_disabled = 0; int nr_mce_banks; EXPORT_SYMBOL_GPL(nr_mce_banks); /* non-fatal.o */ @@ -31,7 +31,7 @@ static fastcall void unexpected_machine_check(struct pt_regs * regs, long error_ void fastcall (*machine_check_vector)(struct pt_regs *, long error_code) = unexpected_machine_check; /* This has to be run for each processor */ -void __devinit mcheck_init(struct cpuinfo_x86 *c) +void mcheck_init(struct cpuinfo_x86 *c) { if (mce_disabled==1) return; diff --git a/arch/i386/kernel/cpu/mcheck/p4.c b/arch/i386/kernel/cpu/mcheck/p4.c index 1d1e885f500..fd2c459a31e 100644 --- a/arch/i386/kernel/cpu/mcheck/p4.c +++ b/arch/i386/kernel/cpu/mcheck/p4.c @@ -77,7 +77,7 @@ fastcall void smp_thermal_interrupt(struct pt_regs *regs) } /* P4/Xeon Thermal regulation detect and init */ -static void __devinit intel_init_thermal(struct cpuinfo_x86 *c) +static void intel_init_thermal(struct cpuinfo_x86 *c) { u32 l, h; unsigned int cpu = smp_processor_id(); @@ -231,7 +231,7 @@ static fastcall void intel_machine_check(struct pt_regs * regs, long error_code) } -void __devinit intel_p4_mcheck_init(struct cpuinfo_x86 *c) +void intel_p4_mcheck_init(struct cpuinfo_x86 *c) { u32 l, h; int i; diff --git a/arch/i386/kernel/cpu/mcheck/p5.c b/arch/i386/kernel/cpu/mcheck/p5.c index 3a2e24baddc..94bc43d950c 100644 --- a/arch/i386/kernel/cpu/mcheck/p5.c +++ b/arch/i386/kernel/cpu/mcheck/p5.c @@ -28,7 +28,7 @@ static fastcall void pentium_machine_check(struct pt_regs * regs, long error_cod } /* Set up machine check reporting for processors with Intel style MCE */ -void __devinit intel_p5_mcheck_init(struct cpuinfo_x86 *c) +void intel_p5_mcheck_init(struct cpuinfo_x86 *c) { u32 l, h; diff --git a/arch/i386/kernel/cpu/mcheck/p6.c b/arch/i386/kernel/cpu/mcheck/p6.c index 979b18bc95c..deeae42ce19 100644 --- a/arch/i386/kernel/cpu/mcheck/p6.c +++ b/arch/i386/kernel/cpu/mcheck/p6.c @@ -79,7 +79,7 @@ static fastcall void intel_machine_check(struct pt_regs * regs, long error_code) } /* Set up machine check reporting for processors with Intel style MCE */ -void __devinit intel_p6_mcheck_init(struct cpuinfo_x86 *c) +void intel_p6_mcheck_init(struct cpuinfo_x86 *c) { u32 l, h; int i; diff --git a/arch/i386/kernel/cpu/mcheck/winchip.c b/arch/i386/kernel/cpu/mcheck/winchip.c index 5b9d2dd411d..9e424b6c293 100644 --- a/arch/i386/kernel/cpu/mcheck/winchip.c +++ b/arch/i386/kernel/cpu/mcheck/winchip.c @@ -22,7 +22,7 @@ static fastcall void winchip_machine_check(struct pt_regs * regs, long error_cod } /* Set up machine check reporting on the Winchip C6 series */ -void __devinit winchip_mcheck_init(struct cpuinfo_x86 *c) +void winchip_mcheck_init(struct cpuinfo_x86 *c) { u32 lo, hi; machine_check_vector = winchip_machine_check; diff --git a/arch/i386/power/cpu.c b/arch/i386/power/cpu.c index 1f1572692e0..50a0bef8c85 100644 --- a/arch/i386/power/cpu.c +++ b/arch/i386/power/cpu.c @@ -118,6 +118,7 @@ void __restore_processor_state(struct saved_context *ctxt) fix_processor_context(); do_fpu_end(); mtrr_ap_init(); + mcheck_init(&boot_cpu_data); } void restore_processor_state(void) -- cgit v1.2.3 From d9b5444eeb3a663ca4a625878b1421c9e9b18e8b Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 7 Nov 2005 00:58:44 -0800 Subject: [PATCH] cris: "extern inline" -> "static inline" "extern inline" doesn't make much sense. Signed-off-by: Adrian Bunk Acked-by: Mikael Starvik Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/cris/arch-v10/README.mm | 6 +++--- arch/cris/arch-v10/kernel/signal.c | 2 +- arch/cris/arch-v32/kernel/signal.c | 2 +- arch/cris/mm/ioremap.c | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/cris/arch-v10/README.mm b/arch/cris/arch-v10/README.mm index 6f08903f313..517d1f027fe 100644 --- a/arch/cris/arch-v10/README.mm +++ b/arch/cris/arch-v10/README.mm @@ -177,7 +177,7 @@ The example address is 0xd004000c; in binary this is: Given the top-level Page Directory, the offset in that directory is calculated using the upper 8 bits: -extern inline pgd_t * pgd_offset(struct mm_struct * mm, unsigned long address) +static inline pgd_t * pgd_offset(struct mm_struct * mm, unsigned long address) { return mm->pgd + (address >> PGDIR_SHIFT); } @@ -190,14 +190,14 @@ The pgd_t from our example will therefore be the 208'th (0xd0) entry in mm->pgd. Since the Middle Directory does not exist, it is a unity mapping: -extern inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address) +static inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address) { return (pmd_t *) dir; } The Page Table provides the final lookup by using bits 13 to 23 as index: -extern inline pte_t * pte_offset(pmd_t * dir, unsigned long address) +static inline pte_t * pte_offset(pmd_t * dir, unsigned long address) { return (pte_t *) pmd_page(*dir) + ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)); diff --git a/arch/cris/arch-v10/kernel/signal.c b/arch/cris/arch-v10/kernel/signal.c index 693771961f8..19bcad05716 100644 --- a/arch/cris/arch-v10/kernel/signal.c +++ b/arch/cris/arch-v10/kernel/signal.c @@ -476,7 +476,7 @@ give_sigsegv: * OK, we're invoking a handler */ -extern inline void +static inline void handle_signal(int canrestart, unsigned long sig, siginfo_t *info, struct k_sigaction *ka, sigset_t *oldset, struct pt_regs * regs) diff --git a/arch/cris/arch-v32/kernel/signal.c b/arch/cris/arch-v32/kernel/signal.c index 0a3614dab88..99e59b3eacf 100644 --- a/arch/cris/arch-v32/kernel/signal.c +++ b/arch/cris/arch-v32/kernel/signal.c @@ -513,7 +513,7 @@ give_sigsegv: } /* Invoke a singal handler to, well, handle the signal. */ -extern inline void +static inline void handle_signal(int canrestart, unsigned long sig, siginfo_t *info, struct k_sigaction *ka, sigset_t *oldset, struct pt_regs * regs) diff --git a/arch/cris/mm/ioremap.c b/arch/cris/mm/ioremap.c index a92ac987758..1780df3ed9e 100644 --- a/arch/cris/mm/ioremap.c +++ b/arch/cris/mm/ioremap.c @@ -16,7 +16,7 @@ #include #include -extern inline void remap_area_pte(pte_t * pte, unsigned long address, unsigned long size, +static inline void remap_area_pte(pte_t * pte, unsigned long address, unsigned long size, unsigned long phys_addr, pgprot_t prot) { unsigned long end; -- cgit v1.2.3 From 953206858070e5921b9d5931c293ec983a6790cb Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Mon, 7 Nov 2005 00:58:45 -0800 Subject: [PATCH] uml: improve stub debugging Add some more debugging information when a stub does something unexpected, usually segfaulting. Now, it dumps out the stub's registers as well as the signal. Signed-off-by: Jeff Dike Cc: Paolo Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/kernel/skas/process.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/um/kernel/skas/process.c b/arch/um/kernel/skas/process.c index 5cd0e992978..42f2da687dc 100644 --- a/arch/um/kernel/skas/process.c +++ b/arch/um/kernel/skas/process.c @@ -69,6 +69,17 @@ void wait_stub_done(int pid, int sig, char * fname) if((n < 0) || !WIFSTOPPED(status) || (WSTOPSIG(status) != SIGUSR1 && WSTOPSIG(status) != SIGTRAP)){ + unsigned long regs[FRAME_SIZE]; + if(ptrace(PTRACE_GETREGS, pid, 0, regs) < 0) + printk("Failed to get registers from stub, " + "errno = %d\n", errno); + else { + int i; + + printk("Stub registers -\n"); + for(i = 0; i < FRAME_SIZE; i++) + printk("\t%d - %lx\n", i, regs[i]); + } panic("%s : failed to wait for SIGUSR1/SIGTRAP, " "pid = %d, n = %d, errno = %d, status = 0x%x\n", fname, pid, n, errno, status); -- cgit v1.2.3 From 4f0272415ad1867cea2a7ef5659769243ae50fbe Mon Sep 17 00:00:00 2001 From: Paolo 'Blaisorblade' Giarrusso Date: Mon, 7 Nov 2005 00:58:46 -0800 Subject: [PATCH] uml: fix syscall stubs Jeff Dike noted that the assembly code for syscall stubs is misassembled with GCC 3.2.3: the values copied in registers weren't preserved between one asm() and the following one. So I fixed the thing by rewriting the __asm__ constraints more like unistd.h ones. Note: in syscall6 case I had to add one more instruction (i.e. moving arg6 in eax and shuffling things around) - it's needed for the function to be valid in general (we can't load the value from the stack, relative to ebp, because we change it), but could be avoided since we actually use a constant as param 6. The only fix would be to turn stub_syscall6 to a macro and use a "i" constraint for arg6 (i.e., specify it's a constant value). Signed-off-by: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/include/sysdep-i386/stub.h | 64 +++++++++++++++++++++++++----------- arch/um/include/sysdep-x86_64/stub.h | 61 ++++++++++++++++++++++++++-------- 2 files changed, 92 insertions(+), 33 deletions(-) (limited to 'arch') diff --git a/arch/um/include/sysdep-i386/stub.h b/arch/um/include/sysdep-i386/stub.h index d3699fe1c61..a49ceb199ee 100644 --- a/arch/um/include/sysdep-i386/stub.h +++ b/arch/um/include/sysdep-i386/stub.h @@ -16,45 +16,69 @@ extern void stub_clone_handler(void); #define STUB_MMAP_NR __NR_mmap2 #define MMAP_OFFSET(o) ((o) >> PAGE_SHIFT) +static inline long stub_syscall1(long syscall, long arg1) +{ + long ret; + + __asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1)); + + return ret; +} + static inline long stub_syscall2(long syscall, long arg1, long arg2) { long ret; - __asm__("movl %0, %%ecx; " : : "g" (arg2) : "%ecx"); - __asm__("movl %0, %%ebx; " : : "g" (arg1) : "%ebx"); - __asm__("movl %0, %%eax; " : : "g" (syscall) : "%eax"); - __asm__("int $0x80;" : : : "%eax"); - __asm__ __volatile__("movl %%eax, %0; " : "=g" (ret) :); - return(ret); + __asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1), + "c" (arg2)); + + return ret; } static inline long stub_syscall3(long syscall, long arg1, long arg2, long arg3) { - __asm__("movl %0, %%edx; " : : "g" (arg3) : "%edx"); - return(stub_syscall2(syscall, arg1, arg2)); + long ret; + + __asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1), + "c" (arg2), "d" (arg3)); + + return ret; } static inline long stub_syscall4(long syscall, long arg1, long arg2, long arg3, long arg4) { - __asm__("movl %0, %%esi; " : : "g" (arg4) : "%esi"); - return(stub_syscall3(syscall, arg1, arg2, arg3)); + long ret; + + __asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1), + "c" (arg2), "d" (arg3), "S" (arg4)); + + return ret; +} + +static inline long stub_syscall5(long syscall, long arg1, long arg2, long arg3, + long arg4, long arg5) +{ + long ret; + + __asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1), + "c" (arg2), "d" (arg3), "S" (arg4), "D" (arg5)); + + return ret; } static inline long stub_syscall6(long syscall, long arg1, long arg2, long arg3, long arg4, long arg5, long arg6) { long ret; - __asm__("movl %0, %%eax; " : : "g" (syscall) : "%eax"); - __asm__("movl %0, %%ebx; " : : "g" (arg1) : "%ebx"); - __asm__("movl %0, %%ecx; " : : "g" (arg2) : "%ecx"); - __asm__("movl %0, %%edx; " : : "g" (arg3) : "%edx"); - __asm__("movl %0, %%esi; " : : "g" (arg4) : "%esi"); - __asm__("movl %0, %%edi; " : : "g" (arg5) : "%edi"); - __asm__ __volatile__("pushl %%ebp ; movl %1, %%ebp; " - "int $0x80; popl %%ebp ; " - "movl %%eax, %0; " : "=g" (ret) : "g" (arg6) : "%eax"); - return(ret); + + __asm__ volatile ("push %%ebp ; movl %%eax,%%ebp ; movl %1,%%eax ; " + "int $0x80 ; pop %%ebp" + : "=a" (ret) + : "g" (syscall), "b" (arg1), "c" (arg2), "d" (arg3), + "S" (arg4), "D" (arg5), "0" (arg6)); + + return ret; } static inline void trap_myself(void) diff --git a/arch/um/include/sysdep-x86_64/stub.h b/arch/um/include/sysdep-x86_64/stub.h index f599058d826..2bd6e7a9728 100644 --- a/arch/um/include/sysdep-x86_64/stub.h +++ b/arch/um/include/sysdep-x86_64/stub.h @@ -17,37 +17,72 @@ extern void stub_clone_handler(void); #define STUB_MMAP_NR __NR_mmap #define MMAP_OFFSET(o) (o) +#define __syscall_clobber "r11","rcx","memory" +#define __syscall "syscall" + static inline long stub_syscall2(long syscall, long arg1, long arg2) { long ret; - __asm__("movq %0, %%rsi; " : : "g" (arg2) : "%rsi"); - __asm__("movq %0, %%rdi; " : : "g" (arg1) : "%rdi"); - __asm__("movq %0, %%rax; " : : "g" (syscall) : "%rax"); - __asm__("syscall;" : : : "%rax", "%r11", "%rcx"); - __asm__ __volatile__("movq %%rax, %0; " : "=g" (ret) :); - return(ret); + __asm__ volatile (__syscall + : "=a" (ret) + : "0" (syscall), "D" (arg1), "S" (arg2) : __syscall_clobber ); + + return ret; } static inline long stub_syscall3(long syscall, long arg1, long arg2, long arg3) { - __asm__("movq %0, %%rdx; " : : "g" (arg3) : "%rdx"); - return(stub_syscall2(syscall, arg1, arg2)); + long ret; + + __asm__ volatile (__syscall + : "=a" (ret) + : "0" (syscall), "D" (arg1), "S" (arg2), "d" (arg3) + : __syscall_clobber ); + + return ret; } static inline long stub_syscall4(long syscall, long arg1, long arg2, long arg3, long arg4) { - __asm__("movq %0, %%r10; " : : "g" (arg4) : "%r10"); - return(stub_syscall3(syscall, arg1, arg2, arg3)); + long ret; + + __asm__ volatile ("movq %5,%%r10 ; " __syscall + : "=a" (ret) + : "0" (syscall), "D" (arg1), "S" (arg2), "d" (arg3), + "g" (arg4) + : __syscall_clobber, "r10" ); + + return ret; +} + +static inline long stub_syscall5(long syscall, long arg1, long arg2, long arg3, + long arg4, long arg5) +{ + long ret; + + __asm__ volatile ("movq %5,%%r10 ; movq %6,%%r8 ; " __syscall + : "=a" (ret) + : "0" (syscall), "D" (arg1), "S" (arg2), "d" (arg3), + "g" (arg4), "g" (arg5) + : __syscall_clobber, "r10", "r8" ); + + return ret; } static inline long stub_syscall6(long syscall, long arg1, long arg2, long arg3, long arg4, long arg5, long arg6) { - __asm__("movq %0, %%r9; " : : "g" (arg6) : "%r9"); - __asm__("movq %0, %%r8; " : : "g" (arg5) : "%r8"); - return(stub_syscall4(syscall, arg1, arg2, arg3, arg4)); + long ret; + + __asm__ volatile ("movq %5,%%r10 ; movq %6,%%r8 ; " + "movq %7, %%r9; " __syscall : "=a" (ret) + : "0" (syscall), "D" (arg1), "S" (arg2), "d" (arg3), + "g" (arg4), "g" (arg5), "g" (arg6) + : __syscall_clobber, "r10", "r8", "r9" ); + + return ret; } static inline void trap_myself(void) -- cgit v1.2.3 From 0e76422ca5f34bb43b97c0945646ef072bcc1776 Mon Sep 17 00:00:00 2001 From: Bodo Stroesser Date: Mon, 7 Nov 2005 00:58:47 -0800 Subject: [PATCH] uml: fix UML network driver endianness bugs ifa->ifa_address and ifa->ifa_mask are defined as __u32, but used as if they were char[4]. Network code uses htons() to convert it. So UML's method to access these fields is wrong for bigendians (e.g. s390) I replaced bytewise copying by memcpy(), maybe even that might be removed, if ifa->ifa_address/mask may be used immediately. Signed-off-by: Bodo Stroesser Signed-off-by: Jeff Dike Cc: Paolo Giarrusso Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/net_kern.c | 38 +++++++------------------------------- arch/um/include/net_user.h | 2 +- 2 files changed, 8 insertions(+), 32 deletions(-) (limited to 'arch') diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c index 721e2601a75..fe865d9a372 100644 --- a/arch/um/drivers/net_kern.c +++ b/arch/um/drivers/net_kern.c @@ -96,7 +96,6 @@ irqreturn_t uml_net_interrupt(int irq, void *dev_id, struct pt_regs *regs) static int uml_net_open(struct net_device *dev) { struct uml_net_private *lp = dev->priv; - char addr[sizeof("255.255.255.255\0")]; int err; spin_lock(&lp->lock); @@ -107,7 +106,7 @@ static int uml_net_open(struct net_device *dev) } if(!lp->have_mac){ - dev_ip_addr(dev, addr, &lp->mac[2]); + dev_ip_addr(dev, &lp->mac[2]); set_ether_mac(dev, lp->mac); } @@ -664,8 +663,6 @@ static int uml_inetaddr_event(struct notifier_block *this, unsigned long event, void *ptr) { struct in_ifaddr *ifa = ptr; - u32 addr = ifa->ifa_address; - u32 netmask = ifa->ifa_mask; struct net_device *dev = ifa->ifa_dev->dev; struct uml_net_private *lp; void (*proc)(unsigned char *, unsigned char *, void *); @@ -685,14 +682,8 @@ static int uml_inetaddr_event(struct notifier_block *this, unsigned long event, break; } if(proc != NULL){ - addr_buf[0] = addr & 0xff; - addr_buf[1] = (addr >> 8) & 0xff; - addr_buf[2] = (addr >> 16) & 0xff; - addr_buf[3] = addr >> 24; - netmask_buf[0] = netmask & 0xff; - netmask_buf[1] = (netmask >> 8) & 0xff; - netmask_buf[2] = (netmask >> 16) & 0xff; - netmask_buf[3] = netmask >> 24; + memcpy(addr_buf, &ifa->ifa_address, sizeof(addr_buf)); + memcpy(netmask_buf, &ifa->ifa_mask, sizeof(netmask_buf)); (*proc)(addr_buf, netmask_buf, &lp->user); } return(NOTIFY_DONE); @@ -774,27 +765,18 @@ int setup_etheraddr(char *str, unsigned char *addr) return(1); } -void dev_ip_addr(void *d, char *buf, char *bin_buf) +void dev_ip_addr(void *d, unsigned char *bin_buf) { struct net_device *dev = d; struct in_device *ip = dev->ip_ptr; struct in_ifaddr *in; - u32 addr; if((ip == NULL) || ((in = ip->ifa_list) == NULL)){ printk(KERN_WARNING "dev_ip_addr - device not assigned an " "IP address\n"); return; } - addr = in->ifa_address; - sprintf(buf, "%d.%d.%d.%d", addr & 0xff, (addr >> 8) & 0xff, - (addr >> 16) & 0xff, addr >> 24); - if(bin_buf){ - bin_buf[0] = addr & 0xff; - bin_buf[1] = (addr >> 8) & 0xff; - bin_buf[2] = (addr >> 16) & 0xff; - bin_buf[3] = addr >> 24; - } + memcpy(bin_buf, &in->ifa_address, sizeof(in->ifa_address)); } void set_ether_mac(void *d, unsigned char *addr) @@ -829,14 +811,8 @@ void iter_addresses(void *d, void (*cb)(unsigned char *, unsigned char *, if(ip == NULL) return; in = ip->ifa_list; while(in != NULL){ - address[0] = in->ifa_address & 0xff; - address[1] = (in->ifa_address >> 8) & 0xff; - address[2] = (in->ifa_address >> 16) & 0xff; - address[3] = in->ifa_address >> 24; - netmask[0] = in->ifa_mask & 0xff; - netmask[1] = (in->ifa_mask >> 8) & 0xff; - netmask[2] = (in->ifa_mask >> 16) & 0xff; - netmask[3] = in->ifa_mask >> 24; + memcpy(address, &in->ifa_address, sizeof(address)); + memcpy(netmask, &in->ifa_mask, sizeof(netmask)); (*cb)(address, netmask, arg); in = in->ifa_next; } diff --git a/arch/um/include/net_user.h b/arch/um/include/net_user.h index 89885a77a77..800c403920b 100644 --- a/arch/um/include/net_user.h +++ b/arch/um/include/net_user.h @@ -25,7 +25,7 @@ struct net_user_info { }; extern void ether_user_init(void *data, void *dev); -extern void dev_ip_addr(void *d, char *buf, char *bin_buf); +extern void dev_ip_addr(void *d, unsigned char *bin_buf); extern void set_ether_mac(void *d, unsigned char *addr); extern void iter_addresses(void *d, void (*cb)(unsigned char *, unsigned char *, void *), -- cgit v1.2.3 From bb578426253ab9950cc20b4e5dd6aefb5500144f Mon Sep 17 00:00:00 2001 From: Gennady Sharapov Date: Mon, 7 Nov 2005 00:58:50 -0800 Subject: [PATCH] uml: separate libc-dependent uaccess code The serial UML OS-abstraction layer patch (um/kernel dir). This moves all systemcalls from uaccess_user.c file under os-Linux dir Signed-off-by: Gennady Sharapov Signed-off-by: Jeff Dike Cc: Paolo Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/include/os.h | 6 ++++ arch/um/include/uml_uaccess.h | 4 --- arch/um/kernel/Makefile | 2 +- arch/um/kernel/tt/uaccess_user.c | 1 + arch/um/kernel/uaccess.c | 30 +++++++++++++++++++ arch/um/kernel/uaccess_user.c | 64 ---------------------------------------- arch/um/os-Linux/Makefile | 4 +-- arch/um/os-Linux/uaccess.c | 32 ++++++++++++++++++++ 8 files changed, 72 insertions(+), 71 deletions(-) create mode 100644 arch/um/kernel/uaccess.c delete mode 100644 arch/um/kernel/uaccess_user.c create mode 100644 arch/um/os-Linux/uaccess.c (limited to 'arch') diff --git a/arch/um/include/os.h b/arch/um/include/os.h index 2e58e304b8b..b9f53519bbe 100644 --- a/arch/um/include/os.h +++ b/arch/um/include/os.h @@ -199,6 +199,12 @@ extern void forward_pending_sigio(int target); extern int start_fork_tramp(void *arg, unsigned long temp_stack, int clone_flags, int (*tramp)(void *)); +/* uaccess.c */ +extern unsigned long __do_user_copy(void *to, const void *from, int n, + void **fault_addr, void **fault_catcher, + void (*op)(void *to, const void *from, + int n), int *faulted_out); + #endif /* diff --git a/arch/um/include/uml_uaccess.h b/arch/um/include/uml_uaccess.h index f77eb642845..c0df11d06f5 100644 --- a/arch/um/include/uml_uaccess.h +++ b/arch/um/include/uml_uaccess.h @@ -8,10 +8,6 @@ extern int __do_copy_to_user(void *to, const void *from, int n, void **fault_addr, void **fault_catcher); -extern unsigned long __do_user_copy(void *to, const void *from, int n, - void **fault_addr, void **fault_catcher, - void (*op)(void *to, const void *from, - int n), int *faulted_out); void __do_copy(void *to, const void *from, int n); #endif diff --git a/arch/um/kernel/Makefile b/arch/um/kernel/Makefile index 1a0001b3850..72fd4eada9c 100644 --- a/arch/um/kernel/Makefile +++ b/arch/um/kernel/Makefile @@ -10,7 +10,7 @@ obj-y = config.o exec_kern.o exitcode.o \ helper.o init_task.o irq.o irq_user.o ksyms.o main.o mem.o physmem.o \ process_kern.o ptrace.o reboot.o resource.o sigio_user.o sigio_kern.o \ signal_kern.o signal_user.o smp.o syscall_kern.o sysrq.o time.o \ - time_kern.o tlb.o trap_kern.o trap_user.o uaccess_user.o um_arch.o \ + time_kern.o tlb.o trap_kern.o trap_user.o uaccess.o um_arch.o \ umid.o user_util.o obj-$(CONFIG_BLK_DEV_INITRD) += initrd.o diff --git a/arch/um/kernel/tt/uaccess_user.c b/arch/um/kernel/tt/uaccess_user.c index 8c220f054b6..6c92bbccb49 100644 --- a/arch/um/kernel/tt/uaccess_user.c +++ b/arch/um/kernel/tt/uaccess_user.c @@ -10,6 +10,7 @@ #include "uml_uaccess.h" #include "task.h" #include "kern_util.h" +#include "os.h" int __do_copy_from_user(void *to, const void *from, int n, void **fault_addr, void **fault_catcher) diff --git a/arch/um/kernel/uaccess.c b/arch/um/kernel/uaccess.c new file mode 100644 index 00000000000..054e3de0784 --- /dev/null +++ b/arch/um/kernel/uaccess.c @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2001 Chris Emerson (cemerson@chiark.greenend.org.uk) + * Copyright (C) 2001, 2002 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +/* These are here rather than tt/uaccess.c because skas mode needs them in + * order to do SIGBUS recovery when a tmpfs mount runs out of room. + */ + +#include +#include "os.h" + +void __do_copy(void *to, const void *from, int n) +{ + memcpy(to, from, n); +} + + +int __do_copy_to_user(void *to, const void *from, int n, + void **fault_addr, void **fault_catcher) +{ + unsigned long fault; + int faulted; + + fault = __do_user_copy(to, from, n, fault_addr, fault_catcher, + __do_copy, &faulted); + if(!faulted) return(0); + else return(n - (fault - (unsigned long) to)); +} diff --git a/arch/um/kernel/uaccess_user.c b/arch/um/kernel/uaccess_user.c deleted file mode 100644 index d035257ed0a..00000000000 --- a/arch/um/kernel/uaccess_user.c +++ /dev/null @@ -1,64 +0,0 @@ -/* - * Copyright (C) 2001 Chris Emerson (cemerson@chiark.greenend.org.uk) - * Copyright (C) 2001, 2002 Jeff Dike (jdike@karaya.com) - * Licensed under the GPL - */ - -#include -#include - -/* These are here rather than tt/uaccess.c because skas mode needs them in - * order to do SIGBUS recovery when a tmpfs mount runs out of room. - */ - -unsigned long __do_user_copy(void *to, const void *from, int n, - void **fault_addr, void **fault_catcher, - void (*op)(void *to, const void *from, - int n), int *faulted_out) -{ - unsigned long *faddrp = (unsigned long *) fault_addr, ret; - - sigjmp_buf jbuf; - *fault_catcher = &jbuf; - if(sigsetjmp(jbuf, 1) == 0){ - (*op)(to, from, n); - ret = 0; - *faulted_out = 0; - } - else { - ret = *faddrp; - *faulted_out = 1; - } - *fault_addr = NULL; - *fault_catcher = NULL; - return ret; -} - -void __do_copy(void *to, const void *from, int n) -{ - memcpy(to, from, n); -} - - -int __do_copy_to_user(void *to, const void *from, int n, - void **fault_addr, void **fault_catcher) -{ - unsigned long fault; - int faulted; - - fault = __do_user_copy(to, from, n, fault_addr, fault_catcher, - __do_copy, &faulted); - if(!faulted) return(0); - else return(n - (fault - (unsigned long) to)); -} - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/os-Linux/Makefile b/arch/um/os-Linux/Makefile index d15ec2af6a2..d389c58b18b 100644 --- a/arch/um/os-Linux/Makefile +++ b/arch/um/os-Linux/Makefile @@ -4,10 +4,10 @@ # obj-y = aio.o elf_aux.o file.o mem.o process.o signal.o start_up.o time.o \ - tt.o tty.o user_syms.o drivers/ sys-$(SUBARCH)/ + tt.o tty.o uaccess.o user_syms.o drivers/ sys-$(SUBARCH)/ USER_OBJS := aio.o elf_aux.o file.o mem.o process.o signal.o start_up.o \ - time.o tt.o tty.o + time.o tt.o tty.o uaccess.o elf_aux.o: $(ARCH_DIR)/kernel-offsets.h CFLAGS_elf_aux.o += -I$(objtree)/arch/um diff --git a/arch/um/os-Linux/uaccess.c b/arch/um/os-Linux/uaccess.c new file mode 100644 index 00000000000..38d710158c3 --- /dev/null +++ b/arch/um/os-Linux/uaccess.c @@ -0,0 +1,32 @@ +/* + * Copyright (C) 2001 Chris Emerson (cemerson@chiark.greenend.org.uk) + * Copyright (C) 2001, 2002 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#include +#include + +unsigned long __do_user_copy(void *to, const void *from, int n, + void **fault_addr, void **fault_catcher, + void (*op)(void *to, const void *from, + int n), int *faulted_out) +{ + unsigned long *faddrp = (unsigned long *) fault_addr, ret; + + sigjmp_buf jbuf; + *fault_catcher = &jbuf; + if(sigsetjmp(jbuf, 1) == 0){ + (*op)(to, from, n); + ret = 0; + *faulted_out = 0; + } + else { + ret = *faddrp; + *faulted_out = 1; + } + *fault_addr = NULL; + *fault_catcher = NULL; + return ret; +} + -- cgit v1.2.3 From 52c653b3bed323df9006c06cdfb4548ec44b3109 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Mon, 7 Nov 2005 00:58:50 -0800 Subject: [PATCH] uml: separate libc-dependent early initialization The serial UML OS-abstraction layer patch (um/kernel dir). This moves all systemcalls from main.c file under os-Linux dir and joins mem.c and um_arch.c files. Signed-off-by: Gennady Sharapov Signed-off-by: Jeff Dike Cc: Paolo Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/kernel/Makefile | 4 +- arch/um/kernel/main.c | 270 ---------------------------------------------- arch/um/os-Linux/Makefile | 8 +- arch/um/os-Linux/main.c | 259 ++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 265 insertions(+), 276 deletions(-) delete mode 100644 arch/um/kernel/main.c create mode 100644 arch/um/os-Linux/main.c (limited to 'arch') diff --git a/arch/um/kernel/Makefile b/arch/um/kernel/Makefile index 72fd4eada9c..f9858583863 100644 --- a/arch/um/kernel/Makefile +++ b/arch/um/kernel/Makefile @@ -7,7 +7,7 @@ extra-y := vmlinux.lds clean-files := obj-y = config.o exec_kern.o exitcode.o \ - helper.o init_task.o irq.o irq_user.o ksyms.o main.o mem.o physmem.o \ + helper.o init_task.o irq.o irq_user.o ksyms.o mem.o physmem.o \ process_kern.o ptrace.o reboot.o resource.o sigio_user.o sigio_kern.o \ signal_kern.o signal_user.o smp.o syscall_kern.o sysrq.o time.o \ time_kern.o tlb.o trap_kern.o trap_user.o uaccess.o um_arch.o \ @@ -24,7 +24,7 @@ obj-$(CONFIG_MODE_SKAS) += skas/ user-objs-$(CONFIG_TTY_LOG) += tty_log.o -USER_OBJS := $(user-objs-y) config.o helper.o main.o time.o tty_log.o umid.o \ +USER_OBJS := $(user-objs-y) config.o helper.o time.o tty_log.o umid.o \ user_util.o include arch/um/scripts/Makefile.rules diff --git a/arch/um/kernel/main.c b/arch/um/kernel/main.c deleted file mode 100644 index d31027f0fe3..00000000000 --- a/arch/um/kernel/main.c +++ /dev/null @@ -1,270 +0,0 @@ -/* - * Copyright (C) 2000, 2001 Jeff Dike (jdike@karaya.com) - * Licensed under the GPL - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "user_util.h" -#include "kern_util.h" -#include "mem_user.h" -#include "signal_user.h" -#include "time_user.h" -#include "irq_user.h" -#include "user.h" -#include "init.h" -#include "mode.h" -#include "choose-mode.h" -#include "uml-config.h" -#include "os.h" - -/* Set in set_stklim, which is called from main and __wrap_malloc. - * __wrap_malloc only calls it if main hasn't started. - */ -unsigned long stacksizelim; - -/* Set in main */ -char *linux_prog; - -#define PGD_BOUND (4 * 1024 * 1024) -#define STACKSIZE (8 * 1024 * 1024) -#define THREAD_NAME_LEN (256) - -static void set_stklim(void) -{ - struct rlimit lim; - - if(getrlimit(RLIMIT_STACK, &lim) < 0){ - perror("getrlimit"); - exit(1); - } - if((lim.rlim_cur == RLIM_INFINITY) || (lim.rlim_cur > STACKSIZE)){ - lim.rlim_cur = STACKSIZE; - if(setrlimit(RLIMIT_STACK, &lim) < 0){ - perror("setrlimit"); - exit(1); - } - } - stacksizelim = (lim.rlim_cur + PGD_BOUND - 1) & ~(PGD_BOUND - 1); -} - -static __init void do_uml_initcalls(void) -{ - initcall_t *call; - - call = &__uml_initcall_start; - while (call < &__uml_initcall_end){; - (*call)(); - call++; - } -} - -static void last_ditch_exit(int sig) -{ - signal(SIGINT, SIG_DFL); - signal(SIGTERM, SIG_DFL); - signal(SIGHUP, SIG_DFL); - uml_cleanup(); - exit(1); -} - -extern int uml_exitcode; - -extern void scan_elf_aux( char **envp); - -int main(int argc, char **argv, char **envp) -{ - char **new_argv; - sigset_t mask; - int ret, i, err; - - /* Enable all signals except SIGIO - in some environments, we can - * enter with some signals blocked - */ - - sigemptyset(&mask); - sigaddset(&mask, SIGIO); - if(sigprocmask(SIG_SETMASK, &mask, NULL) < 0){ - perror("sigprocmask"); - exit(1); - } - -#ifdef UML_CONFIG_CMDLINE_ON_HOST - /* Allocate memory for thread command lines */ - if(argc < 2 || strlen(argv[1]) < THREAD_NAME_LEN - 1){ - - char padding[THREAD_NAME_LEN] = { - [ 0 ... THREAD_NAME_LEN - 2] = ' ', '\0' - }; - - new_argv = malloc((argc + 2) * sizeof(char*)); - if(!new_argv) { - perror("Allocating extended argv"); - exit(1); - } - - new_argv[0] = argv[0]; - new_argv[1] = padding; - - for(i = 2; i <= argc; i++) - new_argv[i] = argv[i - 1]; - new_argv[argc + 1] = NULL; - - execvp(new_argv[0], new_argv); - perror("execing with extended args"); - exit(1); - } -#endif - - linux_prog = argv[0]; - - set_stklim(); - - new_argv = malloc((argc + 1) * sizeof(char *)); - if(new_argv == NULL){ - perror("Mallocing argv"); - exit(1); - } - for(i=0;i= uml_physmem) && (addr < high_physmem)){ - if(CAN_KMALLOC()) - kfree(ptr); - } - else if((addr >= start_vm) && (addr < end_vm)){ - if(CAN_KMALLOC()) - vfree(ptr); - } - else __real_free(ptr); -} - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/os-Linux/Makefile b/arch/um/os-Linux/Makefile index d389c58b18b..0b761a08f0d 100644 --- a/arch/um/os-Linux/Makefile +++ b/arch/um/os-Linux/Makefile @@ -3,11 +3,11 @@ # Licensed under the GPL # -obj-y = aio.o elf_aux.o file.o mem.o process.o signal.o start_up.o time.o \ - tt.o tty.o uaccess.o user_syms.o drivers/ sys-$(SUBARCH)/ +obj-y = aio.o elf_aux.o file.o main.o mem.o process.o signal.o start_up.o \ + time.o tt.o tty.o uaccess.o user_syms.o drivers/ sys-$(SUBARCH)/ -USER_OBJS := aio.o elf_aux.o file.o mem.o process.o signal.o start_up.o \ - time.o tt.o tty.o uaccess.o +USER_OBJS := aio.o elf_aux.o file.o main.o mem.o process.o signal.o \ + start_up.o time.o tt.o tty.o uaccess.o elf_aux.o: $(ARCH_DIR)/kernel-offsets.h CFLAGS_elf_aux.o += -I$(objtree)/arch/um diff --git a/arch/um/os-Linux/main.c b/arch/um/os-Linux/main.c new file mode 100644 index 00000000000..23da27d2256 --- /dev/null +++ b/arch/um/os-Linux/main.c @@ -0,0 +1,259 @@ +/* + * Copyright (C) 2000, 2001 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "user_util.h" +#include "kern_util.h" +#include "mem_user.h" +#include "signal_user.h" +#include "time_user.h" +#include "irq_user.h" +#include "user.h" +#include "init.h" +#include "mode.h" +#include "choose-mode.h" +#include "uml-config.h" +#include "os.h" + +/* Set in set_stklim, which is called from main and __wrap_malloc. + * __wrap_malloc only calls it if main hasn't started. + */ +unsigned long stacksizelim; + +/* Set in main */ +char *linux_prog; + +#define PGD_BOUND (4 * 1024 * 1024) +#define STACKSIZE (8 * 1024 * 1024) +#define THREAD_NAME_LEN (256) + +static void set_stklim(void) +{ + struct rlimit lim; + + if(getrlimit(RLIMIT_STACK, &lim) < 0){ + perror("getrlimit"); + exit(1); + } + if((lim.rlim_cur == RLIM_INFINITY) || (lim.rlim_cur > STACKSIZE)){ + lim.rlim_cur = STACKSIZE; + if(setrlimit(RLIMIT_STACK, &lim) < 0){ + perror("setrlimit"); + exit(1); + } + } + stacksizelim = (lim.rlim_cur + PGD_BOUND - 1) & ~(PGD_BOUND - 1); +} + +static __init void do_uml_initcalls(void) +{ + initcall_t *call; + + call = &__uml_initcall_start; + while (call < &__uml_initcall_end){; + (*call)(); + call++; + } +} + +static void last_ditch_exit(int sig) +{ + signal(SIGINT, SIG_DFL); + signal(SIGTERM, SIG_DFL); + signal(SIGHUP, SIG_DFL); + uml_cleanup(); + exit(1); +} + +extern int uml_exitcode; + +extern void scan_elf_aux( char **envp); + +int main(int argc, char **argv, char **envp) +{ + char **new_argv; + sigset_t mask; + int ret, i, err; + + /* Enable all signals except SIGIO - in some environments, we can + * enter with some signals blocked + */ + + sigemptyset(&mask); + sigaddset(&mask, SIGIO); + if(sigprocmask(SIG_SETMASK, &mask, NULL) < 0){ + perror("sigprocmask"); + exit(1); + } + +#ifdef UML_CONFIG_CMDLINE_ON_HOST + /* Allocate memory for thread command lines */ + if(argc < 2 || strlen(argv[1]) < THREAD_NAME_LEN - 1){ + + char padding[THREAD_NAME_LEN] = { + [ 0 ... THREAD_NAME_LEN - 2] = ' ', '\0' + }; + + new_argv = malloc((argc + 2) * sizeof(char*)); + if(!new_argv) { + perror("Allocating extended argv"); + exit(1); + } + + new_argv[0] = argv[0]; + new_argv[1] = padding; + + for(i = 2; i <= argc; i++) + new_argv[i] = argv[i - 1]; + new_argv[argc + 1] = NULL; + + execvp(new_argv[0], new_argv); + perror("execing with extended args"); + exit(1); + } +#endif + + linux_prog = argv[0]; + + set_stklim(); + + new_argv = malloc((argc + 1) * sizeof(char *)); + if(new_argv == NULL){ + perror("Mallocing argv"); + exit(1); + } + for(i=0;i= uml_physmem) && (addr < high_physmem)){ + if(CAN_KMALLOC()) + kfree(ptr); + } + else if((addr >= start_vm) && (addr < end_vm)){ + if(CAN_KMALLOC()) + vfree(ptr); + } + else __real_free(ptr); +} -- cgit v1.2.3 From ff5c6ff54215fe284e515032878111de5d8a5ce1 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Mon, 7 Nov 2005 00:58:51 -0800 Subject: [PATCH] uml: separate libc-dependent helper code The serial UML OS-abstraction layer patch (um/kernel dir). This moves all systemcalls from helper.c file under os-Linux dir Signed-off-by: Gennady Sharapov Signed-off-by: Jeff Dike Cc: Paolo Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/chan_user.c | 1 - arch/um/drivers/harddog_kern.c | 1 - arch/um/drivers/harddog_user.c | 1 - arch/um/drivers/net_user.c | 1 - arch/um/drivers/port_user.c | 1 - arch/um/drivers/slip_user.c | 1 - arch/um/drivers/slirp_user.c | 1 - arch/um/drivers/xterm.c | 1 - arch/um/include/helper.h | 27 ----- arch/um/include/os.h | 8 ++ arch/um/kernel/Makefile | 5 +- arch/um/kernel/helper.c | 165 ------------------------------- arch/um/kernel/ksyms.c | 1 - arch/um/kernel/sigio_user.c | 1 - arch/um/kernel/user_util.c | 1 - arch/um/os-Linux/Makefile | 7 +- arch/um/os-Linux/aio.c | 1 - arch/um/os-Linux/drivers/ethertap_user.c | 1 - arch/um/os-Linux/drivers/tuntap_user.c | 1 - arch/um/os-Linux/helper.c | 165 +++++++++++++++++++++++++++++++ 20 files changed, 179 insertions(+), 212 deletions(-) delete mode 100644 arch/um/include/helper.h delete mode 100644 arch/um/kernel/helper.c create mode 100644 arch/um/os-Linux/helper.c (limited to 'arch') diff --git a/arch/um/drivers/chan_user.c b/arch/um/drivers/chan_user.c index de3bce71aeb..1c55d580248 100644 --- a/arch/um/drivers/chan_user.c +++ b/arch/um/drivers/chan_user.c @@ -16,7 +16,6 @@ #include "user_util.h" #include "chan_user.h" #include "user.h" -#include "helper.h" #include "os.h" #include "choose-mode.h" #include "mode.h" diff --git a/arch/um/drivers/harddog_kern.c b/arch/um/drivers/harddog_kern.c index 147ec19f6bb..49acb2badf3 100644 --- a/arch/um/drivers/harddog_kern.c +++ b/arch/um/drivers/harddog_kern.c @@ -46,7 +46,6 @@ #include #include #include -#include "helper.h" #include "mconsole.h" MODULE_LICENSE("GPL"); diff --git a/arch/um/drivers/harddog_user.c b/arch/um/drivers/harddog_user.c index d934181b8d4..def013b5a3c 100644 --- a/arch/um/drivers/harddog_user.c +++ b/arch/um/drivers/harddog_user.c @@ -8,7 +8,6 @@ #include #include "user_util.h" #include "user.h" -#include "helper.h" #include "mconsole.h" #include "os.h" #include "choose-mode.h" diff --git a/arch/um/drivers/net_user.c b/arch/um/drivers/net_user.c index 3730d4f1271..098fa65981a 100644 --- a/arch/um/drivers/net_user.c +++ b/arch/um/drivers/net_user.c @@ -16,7 +16,6 @@ #include "user_util.h" #include "kern_util.h" #include "net_user.h" -#include "helper.h" #include "os.h" int tap_open_common(void *dev, char *gate_addr) diff --git a/arch/um/drivers/port_user.c b/arch/um/drivers/port_user.c index 14dd2002d2d..ed4a1a6c5d8 100644 --- a/arch/um/drivers/port_user.c +++ b/arch/um/drivers/port_user.c @@ -18,7 +18,6 @@ #include "user.h" #include "chan_user.h" #include "port.h" -#include "helper.h" #include "os.h" struct port_chan { diff --git a/arch/um/drivers/slip_user.c b/arch/um/drivers/slip_user.c index 71af444e591..89fbec185cc 100644 --- a/arch/um/drivers/slip_user.c +++ b/arch/um/drivers/slip_user.c @@ -14,7 +14,6 @@ #include "net_user.h" #include "slip.h" #include "slip_common.h" -#include "helper.h" #include "os.h" void slip_user_init(void *data, void *dev) diff --git a/arch/um/drivers/slirp_user.c b/arch/um/drivers/slirp_user.c index 8d91f663d82..b94c66114bc 100644 --- a/arch/um/drivers/slirp_user.c +++ b/arch/um/drivers/slirp_user.c @@ -13,7 +13,6 @@ #include "net_user.h" #include "slirp.h" #include "slip_common.h" -#include "helper.h" #include "os.h" void slirp_user_init(void *data, void *dev) diff --git a/arch/um/drivers/xterm.c b/arch/um/drivers/xterm.c index 90e0e5ff451..b530f1a6540 100644 --- a/arch/um/drivers/xterm.c +++ b/arch/um/drivers/xterm.c @@ -14,7 +14,6 @@ #include #include "kern_util.h" #include "chan_user.h" -#include "helper.h" #include "user_util.h" #include "user.h" #include "os.h" diff --git a/arch/um/include/helper.h b/arch/um/include/helper.h deleted file mode 100644 index 162ac31192f..00000000000 --- a/arch/um/include/helper.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) - * Licensed under the GPL - */ - -#ifndef __HELPER_H__ -#define __HELPER_H__ - -extern int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv, - unsigned long *stack_out); -extern int run_helper_thread(int (*proc)(void *), void *arg, - unsigned int flags, unsigned long *stack_out, - int stack_order); -extern int helper_wait(int pid); - -#endif - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/include/os.h b/arch/um/include/os.h index b9f53519bbe..112d7288f0c 100644 --- a/arch/um/include/os.h +++ b/arch/um/include/os.h @@ -205,6 +205,14 @@ extern unsigned long __do_user_copy(void *to, const void *from, int n, void (*op)(void *to, const void *from, int n), int *faulted_out); +/* helper.c */ +extern int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv, + unsigned long *stack_out); +extern int run_helper_thread(int (*proc)(void *), void *arg, + unsigned int flags, unsigned long *stack_out, + int stack_order); +extern int helper_wait(int pid); + #endif /* diff --git a/arch/um/kernel/Makefile b/arch/um/kernel/Makefile index f9858583863..3de9d21e36b 100644 --- a/arch/um/kernel/Makefile +++ b/arch/um/kernel/Makefile @@ -7,7 +7,7 @@ extra-y := vmlinux.lds clean-files := obj-y = config.o exec_kern.o exitcode.o \ - helper.o init_task.o irq.o irq_user.o ksyms.o mem.o physmem.o \ + init_task.o irq.o irq_user.o ksyms.o mem.o physmem.o \ process_kern.o ptrace.o reboot.o resource.o sigio_user.o sigio_kern.o \ signal_kern.o signal_user.o smp.o syscall_kern.o sysrq.o time.o \ time_kern.o tlb.o trap_kern.o trap_user.o uaccess.o um_arch.o \ @@ -24,8 +24,7 @@ obj-$(CONFIG_MODE_SKAS) += skas/ user-objs-$(CONFIG_TTY_LOG) += tty_log.o -USER_OBJS := $(user-objs-y) config.o helper.o time.o tty_log.o umid.o \ - user_util.o +USER_OBJS := $(user-objs-y) config.o time.o tty_log.o umid.o user_util.o include arch/um/scripts/Makefile.rules diff --git a/arch/um/kernel/helper.c b/arch/um/kernel/helper.c deleted file mode 100644 index 33fb0bd3b11..00000000000 --- a/arch/um/kernel/helper.c +++ /dev/null @@ -1,165 +0,0 @@ -/* - * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) - * Licensed under the GPL - */ - -#include -#include -#include -#include -#include -#include -#include -#include "user.h" -#include "kern_util.h" -#include "user_util.h" -#include "helper.h" -#include "os.h" - -struct helper_data { - void (*pre_exec)(void*); - void *pre_data; - char **argv; - int fd; -}; - -/* Debugging aid, changed only from gdb */ -int helper_pause = 0; - -static void helper_hup(int sig) -{ -} - -static int helper_child(void *arg) -{ - struct helper_data *data = arg; - char **argv = data->argv; - int errval; - - if(helper_pause){ - signal(SIGHUP, helper_hup); - pause(); - } - if(data->pre_exec != NULL) - (*data->pre_exec)(data->pre_data); - execvp(argv[0], argv); - errval = errno; - printk("execvp of '%s' failed - errno = %d\n", argv[0], errno); - os_write_file(data->fd, &errval, sizeof(errval)); - os_kill_process(os_getpid(), 0); - return(0); -} - -/* Returns either the pid of the child process we run or -E* on failure. - * XXX The alloc_stack here breaks if this is called in the tracing thread */ -int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv, - unsigned long *stack_out) -{ - struct helper_data data; - unsigned long stack, sp; - int pid, fds[2], ret, n; - - if((stack_out != NULL) && (*stack_out != 0)) - stack = *stack_out; - else stack = alloc_stack(0, um_in_interrupt()); - if(stack == 0) - return(-ENOMEM); - - ret = os_pipe(fds, 1, 0); - if(ret < 0){ - printk("run_helper : pipe failed, ret = %d\n", -ret); - goto out_free; - } - - ret = os_set_exec_close(fds[1], 1); - if(ret < 0){ - printk("run_helper : setting FD_CLOEXEC failed, ret = %d\n", - -ret); - goto out_close; - } - - sp = stack + page_size() - sizeof(void *); - data.pre_exec = pre_exec; - data.pre_data = pre_data; - data.argv = argv; - data.fd = fds[1]; - pid = clone(helper_child, (void *) sp, CLONE_VM | SIGCHLD, &data); - if(pid < 0){ - ret = -errno; - printk("run_helper : clone failed, errno = %d\n", errno); - goto out_close; - } - - os_close_file(fds[1]); - fds[1] = -1; - - /*Read the errno value from the child.*/ - n = os_read_file(fds[0], &ret, sizeof(ret)); - if(n < 0){ - printk("run_helper : read on pipe failed, ret = %d\n", -n); - ret = n; - os_kill_process(pid, 1); - } - else if(n != 0){ - CATCH_EINTR(n = waitpid(pid, NULL, 0)); - ret = -errno; - } else { - ret = pid; - } - -out_close: - if (fds[1] != -1) - os_close_file(fds[1]); - os_close_file(fds[0]); -out_free: - if(stack_out == NULL) - free_stack(stack, 0); - else *stack_out = stack; - return(ret); -} - -int run_helper_thread(int (*proc)(void *), void *arg, unsigned int flags, - unsigned long *stack_out, int stack_order) -{ - unsigned long stack, sp; - int pid, status, err; - - stack = alloc_stack(stack_order, um_in_interrupt()); - if(stack == 0) return(-ENOMEM); - - sp = stack + (page_size() << stack_order) - sizeof(void *); - pid = clone(proc, (void *) sp, flags | SIGCHLD, arg); - if(pid < 0){ - err = -errno; - printk("run_helper_thread : clone failed, errno = %d\n", - errno); - return err; - } - if(stack_out == NULL){ - CATCH_EINTR(pid = waitpid(pid, &status, 0)); - if(pid < 0){ - err = -errno; - printk("run_helper_thread - wait failed, errno = %d\n", - errno); - pid = err; - } - if(!WIFEXITED(status) || (WEXITSTATUS(status) != 0)) - printk("run_helper_thread - thread returned status " - "0x%x\n", status); - free_stack(stack, stack_order); - } - else *stack_out = stack; - return(pid); -} - -int helper_wait(int pid) -{ - int ret; - - CATCH_EINTR(ret = waitpid(pid, NULL, WNOHANG)); - if(ret < 0){ - ret = -errno; - printk("helper_wait : waitpid failed, errno = %d\n", errno); - } - return(ret); -} diff --git a/arch/um/kernel/ksyms.c b/arch/um/kernel/ksyms.c index a97a72e516a..7713e7a6f47 100644 --- a/arch/um/kernel/ksyms.c +++ b/arch/um/kernel/ksyms.c @@ -20,7 +20,6 @@ #include "user_util.h" #include "mem_user.h" #include "os.h" -#include "helper.h" EXPORT_SYMBOL(stop); EXPORT_SYMBOL(uml_physmem); diff --git a/arch/um/kernel/sigio_user.c b/arch/um/kernel/sigio_user.c index a52751108aa..3fbfd956bfe 100644 --- a/arch/um/kernel/sigio_user.c +++ b/arch/um/kernel/sigio_user.c @@ -18,7 +18,6 @@ #include "kern_util.h" #include "user_util.h" #include "sigio.h" -#include "helper.h" #include "os.h" /* Changed during early boot */ diff --git a/arch/um/kernel/user_util.c b/arch/um/kernel/user_util.c index 41d17c71511..4c231161f25 100644 --- a/arch/um/kernel/user_util.c +++ b/arch/um/kernel/user_util.c @@ -27,7 +27,6 @@ #include "user.h" #include "mem_user.h" #include "init.h" -#include "helper.h" #include "ptrace_user.h" #include "uml-config.h" diff --git a/arch/um/os-Linux/Makefile b/arch/um/os-Linux/Makefile index 0b761a08f0d..b83ac8e21c3 100644 --- a/arch/um/os-Linux/Makefile +++ b/arch/um/os-Linux/Makefile @@ -3,10 +3,11 @@ # Licensed under the GPL # -obj-y = aio.o elf_aux.o file.o main.o mem.o process.o signal.o start_up.o \ - time.o tt.o tty.o uaccess.o user_syms.o drivers/ sys-$(SUBARCH)/ +obj-y = aio.o elf_aux.o file.o helper.o main.o mem.o process.o signal.o \ + start_up.o time.o tt.o tty.o uaccess.o user_syms.o drivers/ \ + sys-$(SUBARCH)/ -USER_OBJS := aio.o elf_aux.o file.o main.o mem.o process.o signal.o \ +USER_OBJS := aio.o elf_aux.o file.o helper.o main.o mem.o process.o signal.o \ start_up.o time.o tt.o tty.o uaccess.o elf_aux.o: $(ARCH_DIR)/kernel-offsets.h diff --git a/arch/um/os-Linux/aio.c b/arch/um/os-Linux/aio.c index 41cfb094420..ffa759addd3 100644 --- a/arch/um/os-Linux/aio.c +++ b/arch/um/os-Linux/aio.c @@ -10,7 +10,6 @@ #include #include #include "os.h" -#include "helper.h" #include "aio.h" #include "init.h" #include "user.h" diff --git a/arch/um/os-Linux/drivers/ethertap_user.c b/arch/um/os-Linux/drivers/ethertap_user.c index cd4d6544da7..901b85e8a1c 100644 --- a/arch/um/os-Linux/drivers/ethertap_user.c +++ b/arch/um/os-Linux/drivers/ethertap_user.c @@ -19,7 +19,6 @@ #include "user_util.h" #include "net_user.h" #include "etap.h" -#include "helper.h" #include "os.h" #define MAX_PACKET ETH_MAX_PACKET diff --git a/arch/um/os-Linux/drivers/tuntap_user.c b/arch/um/os-Linux/drivers/tuntap_user.c index 4ba9b17adf1..52945338b64 100644 --- a/arch/um/os-Linux/drivers/tuntap_user.c +++ b/arch/um/os-Linux/drivers/tuntap_user.c @@ -20,7 +20,6 @@ #include "kern_util.h" #include "user_util.h" #include "user.h" -#include "helper.h" #include "os.h" #define MAX_PACKET ETH_MAX_PACKET diff --git a/arch/um/os-Linux/helper.c b/arch/um/os-Linux/helper.c new file mode 100644 index 00000000000..36cc8475bcd --- /dev/null +++ b/arch/um/os-Linux/helper.c @@ -0,0 +1,165 @@ +/* + * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#include +#include +#include +#include +#include +#include +#include +#include "user.h" +#include "kern_util.h" +#include "user_util.h" +#include "os.h" + +struct helper_data { + void (*pre_exec)(void*); + void *pre_data; + char **argv; + int fd; +}; + +/* Debugging aid, changed only from gdb */ +int helper_pause = 0; + +static void helper_hup(int sig) +{ +} + +static int helper_child(void *arg) +{ + struct helper_data *data = arg; + char **argv = data->argv; + int errval; + + if(helper_pause){ + signal(SIGHUP, helper_hup); + pause(); + } + if(data->pre_exec != NULL) + (*data->pre_exec)(data->pre_data); + execvp(argv[0], argv); + errval = errno; + printk("execvp of '%s' failed - errno = %d\n", argv[0], errno); + os_write_file(data->fd, &errval, sizeof(errval)); + kill(os_getpid(), SIGKILL); + return(0); +} + +/* Returns either the pid of the child process we run or -E* on failure. + * XXX The alloc_stack here breaks if this is called in the tracing thread */ +int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv, + unsigned long *stack_out) +{ + struct helper_data data; + unsigned long stack, sp; + int pid, fds[2], ret, n; + + if((stack_out != NULL) && (*stack_out != 0)) + stack = *stack_out; + else stack = alloc_stack(0, um_in_interrupt()); + if(stack == 0) + return(-ENOMEM); + + ret = os_pipe(fds, 1, 0); + if(ret < 0){ + printk("run_helper : pipe failed, ret = %d\n", -ret); + goto out_free; + } + + ret = os_set_exec_close(fds[1], 1); + if(ret < 0){ + printk("run_helper : setting FD_CLOEXEC failed, ret = %d\n", + -ret); + goto out_close; + } + + sp = stack + page_size() - sizeof(void *); + data.pre_exec = pre_exec; + data.pre_data = pre_data; + data.argv = argv; + data.fd = fds[1]; + pid = clone(helper_child, (void *) sp, CLONE_VM | SIGCHLD, &data); + if(pid < 0){ + ret = -errno; + printk("run_helper : clone failed, errno = %d\n", errno); + goto out_close; + } + + close(fds[1]); + fds[1] = -1; + + /*Read the errno value from the child.*/ + n = os_read_file(fds[0], &ret, sizeof(ret)); + if(n < 0){ + printk("run_helper : read on pipe failed, ret = %d\n", -n); + ret = n; + kill(pid, SIGKILL); + CATCH_EINTR(waitpid(pid, NULL, 0)); + } + else if(n != 0){ + CATCH_EINTR(n = waitpid(pid, NULL, 0)); + ret = -errno; + } else { + ret = pid; + } + +out_close: + if (fds[1] != -1) + close(fds[1]); + close(fds[0]); +out_free: + if(stack_out == NULL) + free_stack(stack, 0); + else *stack_out = stack; + return(ret); +} + +int run_helper_thread(int (*proc)(void *), void *arg, unsigned int flags, + unsigned long *stack_out, int stack_order) +{ + unsigned long stack, sp; + int pid, status, err; + + stack = alloc_stack(stack_order, um_in_interrupt()); + if(stack == 0) return(-ENOMEM); + + sp = stack + (page_size() << stack_order) - sizeof(void *); + pid = clone(proc, (void *) sp, flags | SIGCHLD, arg); + if(pid < 0){ + err = -errno; + printk("run_helper_thread : clone failed, errno = %d\n", + errno); + return err; + } + if(stack_out == NULL){ + CATCH_EINTR(pid = waitpid(pid, &status, 0)); + if(pid < 0){ + err = -errno; + printk("run_helper_thread - wait failed, errno = %d\n", + errno); + pid = err; + } + if(!WIFEXITED(status) || (WEXITSTATUS(status) != 0)) + printk("run_helper_thread - thread returned status " + "0x%x\n", status); + free_stack(stack, stack_order); + } + else *stack_out = stack; + return(pid); +} + +int helper_wait(int pid) +{ + int ret; + + CATCH_EINTR(ret = waitpid(pid, NULL, WNOHANG)); + if(ret < 0){ + ret = -errno; + printk("helper_wait : waitpid failed, errno = %d\n", errno); + } + return(ret); +} -- cgit v1.2.3 From 858259cf7d1c443c836a2022b78cb281f0a9b95e Mon Sep 17 00:00:00 2001 From: Bodo Stroesser Date: Mon, 7 Nov 2005 00:58:55 -0800 Subject: [PATCH] uml: maintain own LDT entries Patch imlements full LDT handling in SKAS: * UML holds it's own LDT table, used to deliver data on modify_ldt(READ) * UML disables the default_ldt, inherited from the host (SKAS3) or resets LDT entries, set by host's clib and inherited in SKAS0 * A new global variable skas_needs_stub is inserted, that can be used to decide, whether stub-pages must be supported or not. * Uses the syscall-stub to replace missing PTRACE_LDT (therefore, write_ldt_entry needs to be modified) Signed-off-by: Bodo Stroesser Signed-off-by: Jeff Dike Cc: Paolo Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/kernel/skas/include/mmu-skas.h | 2 + arch/um/kernel/skas/include/skas.h | 3 +- arch/um/kernel/skas/mem.c | 2 +- arch/um/kernel/skas/mmu.c | 44 +-- arch/um/kernel/skas/process.c | 6 +- arch/um/kernel/skas/process_kern.c | 2 +- arch/um/os-Linux/start_up.c | 75 ++++- arch/um/scripts/Makefile.rules | 7 +- arch/um/sys-i386/ldt.c | 506 ++++++++++++++++++++++++++++++--- arch/um/sys-x86_64/Makefile | 5 +- arch/um/sys-x86_64/syscalls.c | 75 ----- 11 files changed, 586 insertions(+), 141 deletions(-) (limited to 'arch') diff --git a/arch/um/kernel/skas/include/mmu-skas.h b/arch/um/kernel/skas/include/mmu-skas.h index 09536f81ee4..44110c521e4 100644 --- a/arch/um/kernel/skas/include/mmu-skas.h +++ b/arch/um/kernel/skas/include/mmu-skas.h @@ -8,6 +8,7 @@ #include "linux/config.h" #include "mm_id.h" +#include "asm/ldt.h" struct mmu_context_skas { struct mm_id id; @@ -15,6 +16,7 @@ struct mmu_context_skas { #ifdef CONFIG_3_LEVEL_PGTABLES unsigned long last_pmd; #endif + uml_ldt_t ldt; }; extern void switch_mm_skas(struct mm_id * mm_idp); diff --git a/arch/um/kernel/skas/include/skas.h b/arch/um/kernel/skas/include/skas.h index 060934740f9..daa2f85b684 100644 --- a/arch/um/kernel/skas/include/skas.h +++ b/arch/um/kernel/skas/include/skas.h @@ -10,7 +10,8 @@ #include "sysdep/ptrace.h" extern int userspace_pid[]; -extern int proc_mm, ptrace_faultinfo; +extern int proc_mm, ptrace_faultinfo, ptrace_ldt; +extern int skas_needs_stub; extern void switch_threads(void *me, void *next); extern void thread_wait(void *sw, void *fb); diff --git a/arch/um/kernel/skas/mem.c b/arch/um/kernel/skas/mem.c index 147466d7ff4..88ab96c609c 100644 --- a/arch/um/kernel/skas/mem.c +++ b/arch/um/kernel/skas/mem.c @@ -20,7 +20,7 @@ unsigned long set_task_sizes_skas(int arg, unsigned long *host_size_out, *task_size_out = CONFIG_HOST_TASK_SIZE; #else *host_size_out = top; - if (proc_mm && ptrace_faultinfo) + if (!skas_needs_stub) *task_size_out = top; else *task_size_out = CONFIG_STUB_START & PGDIR_MASK; #endif diff --git a/arch/um/kernel/skas/mmu.c b/arch/um/kernel/skas/mmu.c index 9e5e39cea82..677871f1b37 100644 --- a/arch/um/kernel/skas/mmu.c +++ b/arch/um/kernel/skas/mmu.c @@ -15,6 +15,7 @@ #include "asm/mmu.h" #include "asm/pgalloc.h" #include "asm/pgtable.h" +#include "asm/ldt.h" #include "os.h" #include "skas.h" @@ -74,13 +75,12 @@ static int init_stub_pte(struct mm_struct *mm, unsigned long proc, int init_new_context_skas(struct task_struct *task, struct mm_struct *mm) { - struct mm_struct *cur_mm = current->mm; - struct mm_id *cur_mm_id = &cur_mm->context.skas.id; - struct mm_id *mm_id = &mm->context.skas.id; + struct mmu_context_skas *from_mm = NULL; + struct mmu_context_skas *to_mm = &mm->context.skas; unsigned long stack = 0; - int from, ret = -ENOMEM; + int from_fd, ret = -ENOMEM; - if(!proc_mm || !ptrace_faultinfo){ + if(skas_needs_stub){ stack = get_zeroed_page(GFP_KERNEL); if(stack == 0) goto out; @@ -102,33 +102,43 @@ int init_new_context_skas(struct task_struct *task, struct mm_struct *mm) mm->nr_ptes--; } - mm_id->stack = stack; + + to_mm->id.stack = stack; + if(current->mm != NULL && current->mm != &init_mm) + from_mm = ¤t->mm->context.skas; if(proc_mm){ - if((cur_mm != NULL) && (cur_mm != &init_mm)) - from = cur_mm_id->u.mm_fd; - else from = -1; + if(from_mm) + from_fd = from_mm->id.u.mm_fd; + else from_fd = -1; - ret = new_mm(from, stack); + ret = new_mm(from_fd, stack); if(ret < 0){ printk("init_new_context_skas - new_mm failed, " "errno = %d\n", ret); goto out_free; } - mm_id->u.mm_fd = ret; + to_mm->id.u.mm_fd = ret; } else { - if((cur_mm != NULL) && (cur_mm != &init_mm)) - mm_id->u.pid = copy_context_skas0(stack, - cur_mm_id->u.pid); - else mm_id->u.pid = start_userspace(stack); + if(from_mm) + to_mm->id.u.pid = copy_context_skas0(stack, + from_mm->id.u.pid); + else to_mm->id.u.pid = start_userspace(stack); + } + + ret = init_new_ldt(to_mm, from_mm); + if(ret < 0){ + printk("init_new_context_skas - init_ldt" + " failed, errno = %d\n", ret); + goto out_free; } return 0; out_free: - if(mm_id->stack != 0) - free_page(mm_id->stack); + if(to_mm->id.stack != 0) + free_page(to_mm->id.stack); out: return ret; } diff --git a/arch/um/kernel/skas/process.c b/arch/um/kernel/skas/process.c index 42f2da687dc..599d679bd4f 100644 --- a/arch/um/kernel/skas/process.c +++ b/arch/um/kernel/skas/process.c @@ -381,9 +381,9 @@ int copy_context_skas0(unsigned long new_stack, int pid) } /* - * This is used only, if proc_mm is available, while PTRACE_FAULTINFO - * isn't. Opening /proc/mm creates a new mm_context, which lacks the stub-pages - * Thus, we map them using /proc/mm-fd + * This is used only, if stub pages are needed, while proc_mm is + * availabl. Opening /proc/mm creates a new mm_context, which lacks + * the stub-pages. Thus, we map them using /proc/mm-fd */ void map_stub_pages(int fd, unsigned long code, unsigned long data, unsigned long stack) diff --git a/arch/um/kernel/skas/process_kern.c b/arch/um/kernel/skas/process_kern.c index efe92e8aa2a..9c990253966 100644 --- a/arch/um/kernel/skas/process_kern.c +++ b/arch/um/kernel/skas/process_kern.c @@ -145,7 +145,7 @@ int new_mm(int from, unsigned long stack) "err = %d\n", -n); } - if(!ptrace_faultinfo) + if(skas_needs_stub) map_stub_pages(fd, CONFIG_STUB_CODE, CONFIG_STUB_DATA, stack); return(fd); diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c index b99ab414542..553a09c7d0b 100644 --- a/arch/um/os-Linux/start_up.c +++ b/arch/um/os-Linux/start_up.c @@ -135,7 +135,9 @@ static int stop_ptraced_child(int pid, void *stack, int exitcode, } int ptrace_faultinfo = 1; +int ptrace_ldt = 1; int proc_mm = 1; +int skas_needs_stub = 0; static int __init skas0_cmd_param(char *str, int* add) { @@ -352,14 +354,26 @@ __uml_setup("noptracefaultinfo", noptracefaultinfo_cmd_param, " it. To support PTRACE_FAULTINFO, the host needs to be patched\n" " using the current skas3 patch.\n\n"); +static int __init noptraceldt_cmd_param(char *str, int* add) +{ + ptrace_ldt = 0; + return 0; +} + +__uml_setup("noptraceldt", noptraceldt_cmd_param, +"noptraceldt\n" +" Turns off usage of PTRACE_LDT, even if host supports it.\n" +" To support PTRACE_LDT, the host needs to be patched using\n" +" the current skas3 patch.\n\n"); + #ifdef UML_CONFIG_MODE_SKAS -static inline void check_skas3_ptrace_support(void) +static inline void check_skas3_ptrace_faultinfo(void) { struct ptrace_faultinfo fi; void *stack; int pid, n; - printf("Checking for the skas3 patch in the host..."); + printf(" - PTRACE_FAULTINFO..."); pid = start_ptraced_child(&stack); n = ptrace(PTRACE_FAULTINFO, pid, 0, &fi); @@ -381,9 +395,49 @@ static inline void check_skas3_ptrace_support(void) stop_ptraced_child(pid, stack, 1, 1); } -int can_do_skas(void) +static inline void check_skas3_ptrace_ldt(void) +{ +#ifdef PTRACE_LDT + void *stack; + int pid, n; + unsigned char ldtbuf[40]; + struct ptrace_ldt ldt_op = (struct ptrace_ldt) { + .func = 2, /* read default ldt */ + .ptr = ldtbuf, + .bytecount = sizeof(ldtbuf)}; + + printf(" - PTRACE_LDT..."); + pid = start_ptraced_child(&stack); + + n = ptrace(PTRACE_LDT, pid, 0, (unsigned long) &ldt_op); + if (n < 0) { + if(errno == EIO) + printf("not found\n"); + else { + perror("not found"); + } + ptrace_ldt = 0; + } + else { + if(ptrace_ldt) + printf("found\n"); + else + printf("found, but use is disabled\n"); + } + + stop_ptraced_child(pid, stack, 1, 1); +#else + /* PTRACE_LDT might be disabled via cmdline option. + * We want to override this, else we might use the stub + * without real need + */ + ptrace_ldt = 1; +#endif +} + +static inline void check_skas3_proc_mm(void) { - printf("Checking for /proc/mm..."); + printf(" - /proc/mm..."); if (os_access("/proc/mm", OS_ACC_W_OK) < 0) { proc_mm = 0; printf("not found\n"); @@ -394,8 +448,19 @@ int can_do_skas(void) else printf("found\n"); } +} + +int can_do_skas(void) +{ + printf("Checking for the skas3 patch in the host:\n"); + + check_skas3_proc_mm(); + check_skas3_ptrace_faultinfo(); + check_skas3_ptrace_ldt(); + + if(!proc_mm || !ptrace_faultinfo || !ptrace_ldt) + skas_needs_stub = 1; - check_skas3_ptrace_support(); return 1; } #else diff --git a/arch/um/scripts/Makefile.rules b/arch/um/scripts/Makefile.rules index 651d9d88b65..b3fbf125709 100644 --- a/arch/um/scripts/Makefile.rules +++ b/arch/um/scripts/Makefile.rules @@ -26,8 +26,13 @@ define unprofile $(patsubst -pg,,$(patsubst -fprofile-arcs -ftest-coverage,,$(1))) endef +# cmd_make_link checks to see if the $(foo-dir) variable starts with a /. If +# so, it's considered to be a path relative to $(srcdir) rather than +# $(srcdir)/arch/$(SUBARCH). This is because x86_64 wants to get ldt.c from +# arch/um/sys-i386 rather than arch/i386 like the other borrowed files. So, +# it sets $(ldt.c-dir) to /arch/um/sys-i386. quiet_cmd_make_link = SYMLINK $@ -cmd_make_link = ln -sf $(srctree)/arch/$(SUBARCH)/$($(notdir $@)-dir)/$(notdir $@) $@ +cmd_make_link = rm -f $@; ln -sf $(srctree)$(if $(filter-out /%,$($(notdir $@)-dir)),/arch/$(SUBARCH))/$($(notdir $@)-dir)/$(notdir $@) $@ # this needs to be before the foreach, because targets does not accept # complete paths like $(obj)/$(f). To make sure this works, use a := assignment diff --git a/arch/um/sys-i386/ldt.c b/arch/um/sys-i386/ldt.c index 36b5c2c1328..6360f1c958d 100644 --- a/arch/um/sys-i386/ldt.c +++ b/arch/um/sys-i386/ldt.c @@ -3,53 +3,26 @@ * Licensed under the GPL */ +#include "linux/stddef.h" #include "linux/config.h" #include "linux/sched.h" #include "linux/slab.h" #include "linux/types.h" +#include "linux/errno.h" #include "asm/uaccess.h" -#include "asm/ptrace.h" #include "asm/smp.h" #include "asm/ldt.h" +#include "asm/unistd.h" #include "choose-mode.h" #include "kern.h" #include "mode_kern.h" -#ifdef CONFIG_MODE_TT - extern int modify_ldt(int func, void *ptr, unsigned long bytecount); -static int do_modify_ldt_tt(int func, void *ptr, unsigned long bytecount) -{ - return modify_ldt(func, ptr, bytecount); -} - -#endif - -#ifdef CONFIG_MODE_SKAS - -#include "skas.h" -#include "skas_ptrace.h" - -static int do_modify_ldt_skas(int func, void *ptr, unsigned long bytecount) -{ - struct ptrace_ldt ldt; - u32 cpu; - int res; - - ldt = ((struct ptrace_ldt) { .func = func, - .ptr = ptr, - .bytecount = bytecount }); - - cpu = get_cpu(); - res = ptrace(PTRACE_LDT, userspace_pid[cpu], 0, (unsigned long) &ldt); - put_cpu(); - - return res; -} -#endif +#ifdef CONFIG_MODE_TT -int sys_modify_ldt(int func, void __user *ptr, unsigned long bytecount) +static long do_modify_ldt_tt(int func, void __user *ptr, + unsigned long bytecount) { struct user_desc info; int res = 0; @@ -89,8 +62,7 @@ int sys_modify_ldt(int func, void __user *ptr, unsigned long bytecount) goto out; } - res = CHOOSE_MODE_PROC(do_modify_ldt_tt, do_modify_ldt_skas, func, - p, bytecount); + res = modify_ldt(func, p, bytecount); if(res < 0) goto out; @@ -108,3 +80,467 @@ out: kfree(buf); return res; } + +#endif + +#ifdef CONFIG_MODE_SKAS + +#include "skas.h" +#include "skas_ptrace.h" +#include "asm/mmu_context.h" + +long write_ldt_entry(struct mm_id * mm_idp, int func, struct user_desc * desc, + void **addr, int done) +{ + long res; + + if(proc_mm){ + /* This is a special handling for the case, that the mm to + * modify isn't current->active_mm. + * If this is called directly by modify_ldt, + * (current->active_mm->context.skas.u == mm_idp) + * will be true. So no call to switch_mm_skas(mm_idp) is done. + * If this is called in case of init_new_ldt or PTRACE_LDT, + * mm_idp won't belong to current->active_mm, but child->mm. + * So we need to switch child's mm into our userspace, then + * later switch back. + * + * Note: I'm unshure: should interrupts be disabled here? + */ + if(!current->active_mm || current->active_mm == &init_mm || + mm_idp != ¤t->active_mm->context.skas.id) + switch_mm_skas(mm_idp); + } + + if(ptrace_ldt) { + struct ptrace_ldt ldt_op = (struct ptrace_ldt) { + .func = func, + .ptr = desc, + .bytecount = sizeof(*desc)}; + u32 cpu; + int pid; + + if(!proc_mm) + pid = mm_idp->u.pid; + else { + cpu = get_cpu(); + pid = userspace_pid[cpu]; + } + + res = ptrace(PTRACE_LDT, pid, 0, (unsigned long) &ldt_op); + if(res) + res = errno; + + if(proc_mm) + put_cpu(); + } + else { + void *stub_addr; + res = syscall_stub_data(mm_idp, (unsigned long *)desc, + (sizeof(*desc) + sizeof(long) - 1) & + ~(sizeof(long) - 1), + addr, &stub_addr); + if(!res){ + unsigned long args[] = { func, + (unsigned long)stub_addr, + sizeof(*desc), + 0, 0, 0 }; + res = run_syscall_stub(mm_idp, __NR_modify_ldt, args, + 0, addr, done); + } + } + + if(proc_mm){ + /* This is the second part of special handling, that makes + * PTRACE_LDT possible to implement. + */ + if(current->active_mm && current->active_mm != &init_mm && + mm_idp != ¤t->active_mm->context.skas.id) + switch_mm_skas(¤t->active_mm->context.skas.id); + } + + return res; +} + +static long read_ldt_from_host(void __user * ptr, unsigned long bytecount) +{ + int res, n; + struct ptrace_ldt ptrace_ldt = (struct ptrace_ldt) { + .func = 0, + .bytecount = bytecount, + .ptr = (void *)kmalloc(bytecount, GFP_KERNEL)}; + u32 cpu; + + if(ptrace_ldt.ptr == NULL) + return -ENOMEM; + + /* This is called from sys_modify_ldt only, so userspace_pid gives + * us the right number + */ + + cpu = get_cpu(); + res = ptrace(PTRACE_LDT, userspace_pid[cpu], 0, + (unsigned long) &ptrace_ldt); + put_cpu(); + if(res < 0) + goto out; + + n = copy_to_user(ptr, ptrace_ldt.ptr, res); + if(n != 0) + res = -EFAULT; + + out: + kfree(ptrace_ldt.ptr); + + return res; +} + +/* + * In skas mode, we hold our own ldt data in UML. + * Thus, the code implementing sys_modify_ldt_skas + * is very similar to (and mostly stolen from) sys_modify_ldt + * for arch/i386/kernel/ldt.c + * The routines copied and modified in part are: + * - read_ldt + * - read_default_ldt + * - write_ldt + * - sys_modify_ldt_skas + */ + +static int read_ldt(void __user * ptr, unsigned long bytecount) +{ + int i, err = 0; + unsigned long size; + uml_ldt_t * ldt = ¤t->mm->context.skas.ldt; + + if(!ldt->entry_count) + goto out; + if(bytecount > LDT_ENTRY_SIZE*LDT_ENTRIES) + bytecount = LDT_ENTRY_SIZE*LDT_ENTRIES; + err = bytecount; + + if(ptrace_ldt){ + return read_ldt_from_host(ptr, bytecount); + } + + down(&ldt->semaphore); + if(ldt->entry_count <= LDT_DIRECT_ENTRIES){ + size = LDT_ENTRY_SIZE*LDT_DIRECT_ENTRIES; + if(size > bytecount) + size = bytecount; + if(copy_to_user(ptr, ldt->entries, size)) + err = -EFAULT; + bytecount -= size; + ptr += size; + } + else { + for(i=0; ientry_count/LDT_ENTRIES_PER_PAGE && bytecount; + i++){ + size = PAGE_SIZE; + if(size > bytecount) + size = bytecount; + if(copy_to_user(ptr, ldt->pages[i], size)){ + err = -EFAULT; + break; + } + bytecount -= size; + ptr += size; + } + } + up(&ldt->semaphore); + + if(bytecount == 0 || err == -EFAULT) + goto out; + + if(clear_user(ptr, bytecount)) + err = -EFAULT; + +out: + return err; +} + +static int read_default_ldt(void __user * ptr, unsigned long bytecount) +{ + int err; + + if(bytecount > 5*LDT_ENTRY_SIZE) + bytecount = 5*LDT_ENTRY_SIZE; + + err = bytecount; + /* UML doesn't support lcall7 and lcall27. + * So, we don't really have a default ldt, but emulate + * an empty ldt of common host default ldt size. + */ + if(clear_user(ptr, bytecount)) + err = -EFAULT; + + return err; +} + +static int write_ldt(void __user * ptr, unsigned long bytecount, int func) +{ + uml_ldt_t * ldt = ¤t->mm->context.skas.ldt; + struct mm_id * mm_idp = ¤t->mm->context.skas.id; + int i, err; + struct user_desc ldt_info; + struct ldt_entry entry0, *ldt_p; + void *addr = NULL; + + err = -EINVAL; + if(bytecount != sizeof(ldt_info)) + goto out; + err = -EFAULT; + if(copy_from_user(&ldt_info, ptr, sizeof(ldt_info))) + goto out; + + err = -EINVAL; + if(ldt_info.entry_number >= LDT_ENTRIES) + goto out; + if(ldt_info.contents == 3){ + if (func == 1) + goto out; + if (ldt_info.seg_not_present == 0) + goto out; + } + + if(!ptrace_ldt) + down(&ldt->semaphore); + + err = write_ldt_entry(mm_idp, func, &ldt_info, &addr, 1); + if(err) + goto out_unlock; + else if(ptrace_ldt) { + /* With PTRACE_LDT available, this is used as a flag only */ + ldt->entry_count = 1; + goto out; + } + + if(ldt_info.entry_number >= ldt->entry_count && + ldt_info.entry_number >= LDT_DIRECT_ENTRIES){ + for(i=ldt->entry_count/LDT_ENTRIES_PER_PAGE; + i*LDT_ENTRIES_PER_PAGE <= ldt_info.entry_number; + i++){ + if(i == 0) + memcpy(&entry0, ldt->entries, sizeof(entry0)); + ldt->pages[i] = (struct ldt_entry *) + __get_free_page(GFP_KERNEL|__GFP_ZERO); + if(!ldt->pages[i]){ + err = -ENOMEM; + /* Undo the change in host */ + memset(&ldt_info, 0, sizeof(ldt_info)); + write_ldt_entry(mm_idp, 1, &ldt_info, &addr, 1); + goto out_unlock; + } + if(i == 0) { + memcpy(ldt->pages[0], &entry0, sizeof(entry0)); + memcpy(ldt->pages[0]+1, ldt->entries+1, + sizeof(entry0)*(LDT_DIRECT_ENTRIES-1)); + } + ldt->entry_count = (i + 1) * LDT_ENTRIES_PER_PAGE; + } + } + if(ldt->entry_count <= ldt_info.entry_number) + ldt->entry_count = ldt_info.entry_number + 1; + + if(ldt->entry_count <= LDT_DIRECT_ENTRIES) + ldt_p = ldt->entries + ldt_info.entry_number; + else + ldt_p = ldt->pages[ldt_info.entry_number/LDT_ENTRIES_PER_PAGE] + + ldt_info.entry_number%LDT_ENTRIES_PER_PAGE; + + if(ldt_info.base_addr == 0 && ldt_info.limit == 0 && + (func == 1 || LDT_empty(&ldt_info))){ + ldt_p->a = 0; + ldt_p->b = 0; + } + else{ + if (func == 1) + ldt_info.useable = 0; + ldt_p->a = LDT_entry_a(&ldt_info); + ldt_p->b = LDT_entry_b(&ldt_info); + } + err = 0; + +out_unlock: + up(&ldt->semaphore); +out: + return err; +} + +static long do_modify_ldt_skas(int func, void __user *ptr, + unsigned long bytecount) +{ + int ret = -ENOSYS; + + switch (func) { + case 0: + ret = read_ldt(ptr, bytecount); + break; + case 1: + case 0x11: + ret = write_ldt(ptr, bytecount, func); + break; + case 2: + ret = read_default_ldt(ptr, bytecount); + break; + } + return ret; +} + +short dummy_list[9] = {0, -1}; +short * host_ldt_entries = NULL; + +void ldt_get_host_info(void) +{ + long ret; + struct ldt_entry * ldt; + int i, size, k, order; + + host_ldt_entries = dummy_list+1; + + for(i = LDT_PAGES_MAX-1, order=0; i; i>>=1, order++); + + ldt = (struct ldt_entry *) + __get_free_pages(GFP_KERNEL|__GFP_ZERO, order); + if(ldt == NULL) { + printk("ldt_get_host_info: couldn't allocate buffer for host ldt\n"); + return; + } + + ret = modify_ldt(0, ldt, (1<ldt.semaphore); + + if(!from_mm){ + /* + * We have to initialize a clean ldt. + */ + if(proc_mm) { + /* + * If the new mm was created using proc_mm, host's + * default-ldt currently is assigned, which normally + * contains the call-gates for lcall7 and lcall27. + * To remove these gates, we simply write an empty + * entry as number 0 to the host. + */ + err = write_ldt_entry(&new_mm->id, 1, &desc, + &addr, 1); + } + else{ + /* + * Now we try to retrieve info about the ldt, we + * inherited from the host. All ldt-entries found + * will be reset in the following loop + */ + if(host_ldt_entries == NULL) + ldt_get_host_info(); + for(num_p=host_ldt_entries; *num_p != -1; num_p++){ + desc.entry_number = *num_p; + err = write_ldt_entry(&new_mm->id, 1, &desc, + &addr, *(num_p + 1) == -1); + if(err) + break; + } + } + new_mm->ldt.entry_count = 0; + } + else if (!ptrace_ldt) { + /* Our local LDT is used to supply the data for + * modify_ldt(READLDT), if PTRACE_LDT isn't available, + * i.e., we have to use the stub for modify_ldt, which + * can't handle the big read buffer of up to 64kB. + */ + down(&from_mm->ldt.semaphore); + if(from_mm->ldt.entry_count <= LDT_DIRECT_ENTRIES){ + memcpy(new_mm->ldt.entries, from_mm->ldt.entries, + sizeof(new_mm->ldt.entries)); + } + else{ + i = from_mm->ldt.entry_count / LDT_ENTRIES_PER_PAGE; + while(i-->0){ + page = __get_free_page(GFP_KERNEL|__GFP_ZERO); + if (!page){ + err = -ENOMEM; + break; + } + new_mm->ldt.pages[i] = (struct ldt_entry*)page; + memcpy(new_mm->ldt.pages[i], + from_mm->ldt.pages[i], PAGE_SIZE); + } + } + new_mm->ldt.entry_count = from_mm->ldt.entry_count; + up(&from_mm->ldt.semaphore); + } + + return err; +} + + +void free_ldt(struct mmu_context_skas * mm) +{ + int i; + + if(!ptrace_ldt && mm->ldt.entry_count > LDT_DIRECT_ENTRIES){ + i = mm->ldt.entry_count / LDT_ENTRIES_PER_PAGE; + while(i-- > 0){ + free_page((long )mm->ldt.pages[i]); + } + } + mm->ldt.entry_count = 0; +} +#endif + +int sys_modify_ldt(int func, void __user *ptr, unsigned long bytecount) +{ + return(CHOOSE_MODE_PROC(do_modify_ldt_tt, do_modify_ldt_skas, func, + ptr, bytecount)); +} diff --git a/arch/um/sys-x86_64/Makefile b/arch/um/sys-x86_64/Makefile index 06c3633457a..ea977df395a 100644 --- a/arch/um/sys-x86_64/Makefile +++ b/arch/um/sys-x86_64/Makefile @@ -5,7 +5,7 @@ # #XXX: why into lib-y? -lib-y = bitops.o bugs.o csum-partial.o delay.o fault.o mem.o memcpy.o \ +lib-y = bitops.o bugs.o csum-partial.o delay.o fault.o ldt.o mem.o memcpy.o \ ptrace.o ptrace_user.o sigcontext.o signal.o stub.o \ stub_segv.o syscalls.o syscall_table.o sysrq.o thunk.o @@ -14,7 +14,7 @@ obj-$(CONFIG_MODULES) += module.o um_module.o USER_OBJS := ptrace_user.o sigcontext.o -SYMLINKS = bitops.c csum-copy.S csum-partial.c csum-wrappers.c memcpy.S \ +SYMLINKS = bitops.c csum-copy.S csum-partial.c csum-wrappers.c ldt.c memcpy.S \ thunk.S module.c include arch/um/scripts/Makefile.rules @@ -23,6 +23,7 @@ bitops.c-dir = lib csum-copy.S-dir = lib csum-partial.c-dir = lib csum-wrappers.c-dir = lib +ldt.c-dir = /arch/um/sys-i386 memcpy.S-dir = lib thunk.S-dir = lib module.c-dir = kernel diff --git a/arch/um/sys-x86_64/syscalls.c b/arch/um/sys-x86_64/syscalls.c index 3259a4db453..6acee5c4ada 100644 --- a/arch/um/sys-x86_64/syscalls.c +++ b/arch/um/sys-x86_64/syscalls.c @@ -28,81 +28,6 @@ asmlinkage long sys_uname64(struct new_utsname __user * name) return err ? -EFAULT : 0; } -#ifdef CONFIG_MODE_TT -extern int modify_ldt(int func, void *ptr, unsigned long bytecount); - -long sys_modify_ldt_tt(int func, void *ptr, unsigned long bytecount) -{ - /* XXX This should check VERIFY_WRITE depending on func, check this - * in i386 as well. - */ - if (!access_ok(VERIFY_READ, ptr, bytecount)) - return -EFAULT; - return(modify_ldt(func, ptr, bytecount)); -} -#endif - -#ifdef CONFIG_MODE_SKAS -extern int userspace_pid[]; - -#include "skas_ptrace.h" - -long sys_modify_ldt_skas(int func, void *ptr, unsigned long bytecount) -{ - struct ptrace_ldt ldt; - void *buf; - int res, n; - - buf = kmalloc(bytecount, GFP_KERNEL); - if(buf == NULL) - return(-ENOMEM); - - res = 0; - - switch(func){ - case 1: - case 0x11: - res = copy_from_user(buf, ptr, bytecount); - break; - } - - if(res != 0){ - res = -EFAULT; - goto out; - } - - ldt = ((struct ptrace_ldt) { .func = func, - .ptr = buf, - .bytecount = bytecount }); -#warning Need to look up userspace_pid by cpu - res = ptrace(PTRACE_LDT, userspace_pid[0], 0, (unsigned long) &ldt); - if(res < 0) - goto out; - - switch(func){ - case 0: - case 2: - n = res; - res = copy_to_user(ptr, buf, n); - if(res != 0) - res = -EFAULT; - else - res = n; - break; - } - - out: - kfree(buf); - return(res); -} -#endif - -long sys_modify_ldt(int func, void *ptr, unsigned long bytecount) -{ - return(CHOOSE_MODE_PROC(sys_modify_ldt_tt, sys_modify_ldt_skas, func, - ptr, bytecount)); -} - #ifdef CONFIG_MODE_TT extern long arch_prctl(int code, unsigned long addr); -- cgit v1.2.3 From ae17381608a11781a6a67e0ce51607f36780aac7 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Mon, 7 Nov 2005 00:58:57 -0800 Subject: [PATCH] uml: big memory fixes A number of fixes to improve behavior when large physical memory sizes are specified: - libc files need -D_FILE_OFFSET_BITS=64 because there are unavoidable uses of non-64 interfaces in libc - some %d need to be %u Signed-off-by: Jeff Dike Cc: Paolo Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/Makefile | 2 +- arch/um/include/mem_user.h | 2 +- arch/um/include/os.h | 2 +- arch/um/kernel/physmem.c | 4 ++-- arch/um/kernel/um_arch.c | 10 +++++----- arch/um/os-Linux/mem.c | 6 +++--- arch/um/os-Linux/start_up.c | 2 +- 7 files changed, 14 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/um/Makefile b/arch/um/Makefile index e1ffad22460..e55d32e903b 100644 --- a/arch/um/Makefile +++ b/arch/um/Makefile @@ -60,7 +60,7 @@ AFLAGS += $(ARCH_INCLUDE) USER_CFLAGS := $(patsubst -I%,,$(CFLAGS)) USER_CFLAGS := $(patsubst -D__KERNEL__,,$(USER_CFLAGS)) $(ARCH_INCLUDE) \ - $(MODE_INCLUDE) + $(MODE_INCLUDE) -D_FILE_OFFSET_BITS=64 # -Derrno=kernel_errno - This turns all kernel references to errno into # kernel_errno to separate them from the libc errno. This allows -fno-common diff --git a/arch/um/include/mem_user.h b/arch/um/include/mem_user.h index 9fef4123a65..a1064c5823b 100644 --- a/arch/um/include/mem_user.h +++ b/arch/um/include/mem_user.h @@ -57,7 +57,7 @@ extern int init_maps(unsigned long physmem, unsigned long iomem, unsigned long highmem); extern unsigned long get_vm(unsigned long len); extern void setup_physmem(unsigned long start, unsigned long usable, - unsigned long len, unsigned long highmem); + unsigned long len, unsigned long long highmem); extern void add_iomem(char *name, int fd, unsigned long size); extern unsigned long phys_offset(unsigned long phys); extern void unmap_physmem(void); diff --git a/arch/um/include/os.h b/arch/um/include/os.h index 112d7288f0c..2cccfa5b8ab 100644 --- a/arch/um/include/os.h +++ b/arch/um/include/os.h @@ -167,7 +167,7 @@ extern int can_do_skas(void); #endif /* mem.c */ -extern int create_mem_file(unsigned long len); +extern int create_mem_file(unsigned long long len); /* process.c */ extern unsigned long os_process_pc(int pid); diff --git a/arch/um/kernel/physmem.c b/arch/um/kernel/physmem.c index ea670fcc8af..f3b583a878a 100644 --- a/arch/um/kernel/physmem.c +++ b/arch/um/kernel/physmem.c @@ -246,7 +246,7 @@ int is_remapped(void *virt) /* Changed during early boot */ unsigned long high_physmem; -extern unsigned long physmem_size; +extern unsigned long long physmem_size; int init_maps(unsigned long physmem, unsigned long iomem, unsigned long highmem) { @@ -321,7 +321,7 @@ void map_memory(unsigned long virt, unsigned long phys, unsigned long len, extern int __syscall_stub_start, __binary_start; void setup_physmem(unsigned long start, unsigned long reserve_end, - unsigned long len, unsigned long highmem) + unsigned long len, unsigned long long highmem) { unsigned long reserve = reserve_end - start; int pfn = PFN_UP(__pa(reserve_end)); diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c index 93dc782dc1c..142a9493912 100644 --- a/arch/um/kernel/um_arch.c +++ b/arch/um/kernel/um_arch.c @@ -137,7 +137,7 @@ static char *argv1_end = NULL; /* Set in early boot */ static int have_root __initdata = 0; -long physmem_size = 32 * 1024 * 1024; +long long physmem_size = 32 * 1024 * 1024; void set_cmdline(char *cmd) { @@ -402,7 +402,7 @@ int linux_main(int argc, char **argv) #ifndef CONFIG_HIGHMEM highmem = 0; printf("CONFIG_HIGHMEM not enabled - physical memory shrunk " - "to %ld bytes\n", physmem_size); + "to %lu bytes\n", physmem_size); #endif } @@ -414,8 +414,8 @@ int linux_main(int argc, char **argv) setup_physmem(uml_physmem, uml_reserved, physmem_size, highmem); if(init_maps(physmem_size, iomem_size, highmem)){ - printf("Failed to allocate mem_map for %ld bytes of physical " - "memory and %ld bytes of highmem\n", physmem_size, + printf("Failed to allocate mem_map for %lu bytes of physical " + "memory and %lu bytes of highmem\n", physmem_size, highmem); exit(1); } @@ -426,7 +426,7 @@ int linux_main(int argc, char **argv) end_vm = start_vm + virtmem_size; if(virtmem_size < physmem_size) - printf("Kernel virtual memory size shrunk to %ld bytes\n", + printf("Kernel virtual memory size shrunk to %lu bytes\n", virtmem_size); uml_postsetup(); diff --git a/arch/um/os-Linux/mem.c b/arch/um/os-Linux/mem.c index 8e71edaaf80..9d7d69a523b 100644 --- a/arch/um/os-Linux/mem.c +++ b/arch/um/os-Linux/mem.c @@ -88,7 +88,7 @@ int make_tempfile(const char *template, char **out_tempname, int do_unlink) * This proc is used in start_up.c * So it isn't 'static'. */ -int create_tmp_file(unsigned long len) +int create_tmp_file(unsigned long long len) { int fd, err; char zero; @@ -121,7 +121,7 @@ int create_tmp_file(unsigned long len) return(fd); } -static int create_anon_file(unsigned long len) +static int create_anon_file(unsigned long long len) { void *addr; int fd; @@ -144,7 +144,7 @@ static int create_anon_file(unsigned long len) extern int have_devanon; -int create_mem_file(unsigned long len) +int create_mem_file(unsigned long long len) { int err, fd; diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c index 553a09c7d0b..37517d49c4a 100644 --- a/arch/um/os-Linux/start_up.c +++ b/arch/um/os-Linux/start_up.c @@ -296,7 +296,7 @@ static void __init check_ptrace(void) check_sysemu(); } -extern int create_tmp_file(unsigned long len); +extern int create_tmp_file(unsigned long long len); static void check_tmpexec(void) { -- cgit v1.2.3 From 77cc0db46e5d04b476e1984134892edb86cda8e6 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Mon, 7 Nov 2005 00:58:57 -0800 Subject: [PATCH] uml: make tt mode-dependent options depend on MODE_TT This makes some of the tt-specific options actually depend on CONFIG_MODE_TT. Signed-off-by: Jeff Dike Cc: Paolo Giarrusso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/Kconfig | 46 ++++++++++++++++++++++++---------------------- 1 file changed, 24 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/um/Kconfig b/arch/um/Kconfig index cd06ed7d842..3b5f47c4690 100644 --- a/arch/um/Kconfig +++ b/arch/um/Kconfig @@ -65,6 +65,30 @@ config STATIC_LINK chroot, and you disable CONFIG_MODE_TT, you probably want to say Y here. +config HOST_2G_2G + bool "2G/2G host address space split" + default n + depends on MODE_TT + help + This is needed when the host on which you run has a 2G/2G memory + split, instead of the customary 3G/1G. + + Note that to enable such a host + configuration, which makes sense only in some cases, you need special + host patches. + + So, if you do not know what to do here, say 'N'. + +config KERNEL_HALF_GIGS + int "Kernel address space size (in .5G units)" + default "1" + depends on MODE_TT + help + This determines the amount of address space that UML will allocate for + its own, measured in half Gigabyte units. The default is 1. + Change this only if you need to boot UML with an unusually large amount + of physical memory. + config MODE_SKAS bool "Separate Kernel Address Space support" default y @@ -182,19 +206,6 @@ config MAGIC_SYSRQ The keys are documented in . Don't say Y unless you really know what this hack does. -config HOST_2G_2G - bool "2G/2G host address space split" - default n - help - This is needed when the host on which you run has a 2G/2G memory - split, instead of the customary 3G/1G. - - Note that to enable such a host - configuration, which makes sense only in some cases, you need special - host patches. - - So, if you do not know what to do here, say 'N'. - config SMP bool "Symmetric multi-processing support (EXPERIMENTAL)" default n @@ -241,15 +252,6 @@ config NEST_LEVEL set to the host's CONFIG_NEST_LEVEL + CONFIG_KERNEL_HALF_GIGS. Only change this if you are running nested UMLs. -config KERNEL_HALF_GIGS - int "Kernel address space size (in .5G units)" - default "1" - help - This determines the amount of address space that UML will allocate for - its own, measured in half Gigabyte units. The default is 1. - Change this only if you need to boot UML with an unusually large amount - of physical memory. - config HIGHMEM bool "Highmem support" depends on !64BIT -- cgit v1.2.3 From 353f8d1cd5b8540c1591f00a5cbd3aeca699cfcf Mon Sep 17 00:00:00 2001 From: Paolo 'Blaisorblade' Giarrusso Date: Mon, 7 Nov 2005 00:58:58 -0800 Subject: [PATCH] uml: fix hardcoded ZONE_* constants in zone setup Remove usage of hardcoded constants in paging_init(). By chance I spotted a bug in zones_setup involving a change to ZONE_* constants, due to the ZONE_DMA32 patch from Andi Kleen (which is in -mm). So, possibly, instead of zones_size[2] you will find zones_size[3] in the code, but that change is wrong and this patch is still correct. Signed-off-by: Paolo 'Blaisorblade' Giarrusso Cc: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/kernel/mem.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c index 462cc9d6538..fa4f915be5c 100644 --- a/arch/um/kernel/mem.c +++ b/arch/um/kernel/mem.c @@ -234,8 +234,8 @@ void paging_init(void) empty_bad_page = (unsigned long *) alloc_bootmem_low_pages(PAGE_SIZE); for(i=0;i> PAGE_SHIFT) - (uml_physmem >> PAGE_SHIFT); - zones_size[2] = highmem >> PAGE_SHIFT; + zones_size[ZONE_DMA] = (end_iomem >> PAGE_SHIFT) - (uml_physmem >> PAGE_SHIFT); + zones_size[ZONE_HIGHMEM] = highmem >> PAGE_SHIFT; free_area_init(zones_size); /* -- cgit v1.2.3 From 26d89d1eef38473d0da64b7137952c56d0b6d13f Mon Sep 17 00:00:00 2001 From: Paolo 'Blaisorblade' Giarrusso Date: Mon, 7 Nov 2005 00:58:59 -0800 Subject: [PATCH] uml: build host-binaries with the native host arch again This patch reverts back the changes to HOSTCFLAGS and HOSTLDFLAGS When we were building complete binaries to get constants (such as ptrace register layout on stack) from host userspace headers, we needed to make the arch for building HOST binaries match our one: i.e. on a 64bit system compiling 32bit binaries, we compile 32-bit hostprogs and need, say, 32-bit ncurses. Now we can revert that - that avoids problem with, say, menuconfig and ncurses, on a system which can't compile well 32-bit programs. Signed-off-by: Paolo 'Blaisorblade' Giarrusso Cc: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/Makefile-i386 | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/um/Makefile-i386 b/arch/um/Makefile-i386 index aef7c50f8e1..1f7dcb064ae 100644 --- a/arch/um/Makefile-i386 +++ b/arch/um/Makefile-i386 @@ -17,8 +17,6 @@ ifeq ("$(origin SUBARCH)", "command line") ifneq ("$(shell uname -m | sed -e s/i.86/i386/)", "$(SUBARCH)") CFLAGS += $(call cc-option,-m32) USER_CFLAGS += $(call cc-option,-m32) -HOSTCFLAGS += $(call cc-option,-m32) -HOSTLDFLAGS += $(call cc-option,-m32) AFLAGS += $(call cc-option,-m32) LINK-y += $(call cc-option,-m32) UML_OBJCOPYFLAGS += -F $(ELF_FORMAT) -- cgit v1.2.3 From e1c3ad96f662bf1071a71feffadfe0f7604f14e2 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 7 Nov 2005 00:59:02 -0800 Subject: [PATCH] s390: signal delivery Always create all signal frames for pending signals before returning to userspace, not just a single one. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/s390/kernel/entry.S | 4 ++-- arch/s390/kernel/entry64.S | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index 9b30f4cf32c..27b07730b7b 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -288,7 +288,7 @@ sysc_sigpending: bo BASED(sysc_restart) tm __TI_flags+3(%r9),_TIF_SINGLE_STEP bo BASED(sysc_singlestep) - b BASED(sysc_leave) # out of here, do NOT recheck + b BASED(sysc_work_loop) # # _TIF_RESTART_SVC is set, set up registers and restart svc @@ -645,7 +645,7 @@ io_sigpending: l %r1,BASED(.Ldo_signal) basr %r14,%r1 # call do_signal stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts - b BASED(io_leave) # out of here, do NOT recheck + b BASED(io_work_loop) /* * External interrupt handler routine diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S index 7b9b4a2ba1d..4eb71ffcf48 100644 --- a/arch/s390/kernel/entry64.S +++ b/arch/s390/kernel/entry64.S @@ -283,7 +283,7 @@ sysc_sigpending: jo sysc_restart tm __TI_flags+7(%r9),_TIF_SINGLE_STEP jo sysc_singlestep - j sysc_leave # out of here, do NOT recheck + j sysc_work_loop # # _TIF_RESTART_SVC is set, set up registers and restart svc @@ -684,7 +684,7 @@ io_sigpending: slgr %r3,%r3 # clear *oldset brasl %r14,do_signal # call do_signal stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts - j sysc_leave # out of here, do NOT recheck + j io_work_loop /* * External interrupt handler routine -- cgit v1.2.3 From 1b44e98d7d0754bbcf0222baf179f5e2e3dbea7b Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Mon, 7 Nov 2005 00:59:02 -0800 Subject: [PATCH] s390: stop_hz_timer vs. xtime updates The calculation of the value return by next_timer_interrupt from jiffies to jiffies_64 is racy against xtime updates. We need to protect the calculation with read_seqbegin/read_seqretry. Signed-off-by: Martin Schwidefsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/s390/kernel/time.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index 9a1d95894f3..c36353e8c14 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -237,6 +237,8 @@ int sysctl_hz_timer = 1; */ static inline void stop_hz_timer(void) { + unsigned long flags; + unsigned long seq, next; __u64 timer, todval; if (sysctl_hz_timer != 0) @@ -257,7 +259,11 @@ static inline void stop_hz_timer(void) * This cpu is going really idle. Set up the clock comparator * for the next event. */ - timer = (__u64) (next_timer_interrupt() - jiffies) + jiffies_64; + next = next_timer_interrupt(); + do { + seq = read_seqbegin_irqsave(&xtime_lock, flags); + timer = (__u64)(next - jiffies) + jiffies_64; + } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); todval = -1ULL; /* Be careful about overflows. */ if (timer < (-1ULL / CLK_TICKS_PER_JIFFY)) { -- cgit v1.2.3 From 9b4554aa21270f5b6fa19a9dd2285f16e11f15f1 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 7 Nov 2005 00:59:04 -0800 Subject: [PATCH] s390: memory query wait psw Don't switch back to 24 bit addressing mode when waiting for an external interrupt and set the correct bit in wait PSW (external mask instead of I/O mask). Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/s390/kernel/head.S | 3 +-- arch/s390/kernel/head64.S | 5 ++--- 2 files changed, 3 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S index 039354d7234..4ca02933211 100644 --- a/arch/s390/kernel/head.S +++ b/arch/s390/kernel/head.S @@ -572,8 +572,7 @@ startup:basr %r13,0 # get base .Lcr: .long 0x00 # place holder for cr0 .Lwaitsclp: - .long 0x020A0000 - .long .Lsclph + .long 0x010a0000,0x80000000 + .Lsclph .Lrcp: .int 0x00120001 # Read SCP forced code .Lrcp2: diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S index 193aafa72f5..d9be8f96f2e 100644 --- a/arch/s390/kernel/head64.S +++ b/arch/s390/kernel/head64.S @@ -530,7 +530,7 @@ startup:basr %r13,0 # get base be .Lfchunk-.LPG1(%r13) # leave chi %r1,2 be .Lservicecall-.LPG1(%r13) - lpsw .Lwaitsclp-.LPG1(%r13) + lpswe .Lwaitsclp-.LPG1(%r13) .Lsclph: lh %r1,.Lsccbr-PARMAREA(%r4) chi %r1,0x10 # 0x0010 is the sucess code @@ -567,8 +567,7 @@ startup:basr %r13,0 # get base .Lcr: .quad 0x00 # place holder for cr0 .Lwaitsclp: - .long 0x020A0000 - .quad .Lsclph + .quad 0x0102000180000000,.Lsclph .Lrcp: .int 0x00120001 # Read SCP forced code .Lrcp2: -- cgit v1.2.3 From d4b68996785326a67e9842219ab69984243ec658 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Mon, 7 Nov 2005 00:59:06 -0800 Subject: [PATCH] s390: remove pagex support Remove pagex pseudo page fault code. It does not work together with the system call speedup that makes the complete system call path enabled for interrupts. To make pagex and the syscall speedup code work together we would have to add code to the program check handler to do a critical section cleanup like the asynchronous interrupt code. This would make program checks slower. Not what we want. Newer versions of z/VM have the improved pfault pseudo page fault interface. This replaces the old pagex interface and does not have the problem. So its better to just rip out the pagex code. Signed-off-by: Martin Schwidefsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/s390/kernel/traps.c | 29 ++---------- arch/s390/mm/fault.c | 113 +---------------------------------------------- 2 files changed, 5 insertions(+), 137 deletions(-) (limited to 'arch') diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c index 6b8703ec2ae..c5bd36fae56 100644 --- a/arch/s390/kernel/traps.c +++ b/arch/s390/kernel/traps.c @@ -57,7 +57,6 @@ int sysctl_userprocess_debug = 0; extern pgm_check_handler_t do_protection_exception; extern pgm_check_handler_t do_dat_exception; -extern pgm_check_handler_t do_pseudo_page_fault; #ifdef CONFIG_PFAULT extern int pfault_init(void); extern void pfault_fini(void); @@ -676,20 +675,6 @@ asmlinkage void kernel_stack_overflow(struct pt_regs * regs) panic("Corrupt kernel stack, can't continue."); } -#ifndef CONFIG_ARCH_S390X -static int -pagex_reboot_event(struct notifier_block *this, unsigned long event, void *ptr) -{ - if (MACHINE_IS_VM) - cpcmd("SET PAGEX OFF", NULL, 0, NULL); - return NOTIFY_DONE; -} - -static struct notifier_block pagex_reboot_notifier = { - .notifier_call = &pagex_reboot_event, -}; -#endif - /* init is done in lowcore.S and head.S */ void __init trap_init(void) @@ -717,9 +702,7 @@ void __init trap_init(void) pgm_check_table[0x11] = &do_dat_exception; pgm_check_table[0x12] = &translation_exception; pgm_check_table[0x13] = &special_op_exception; -#ifndef CONFIG_ARCH_S390X - pgm_check_table[0x14] = &do_pseudo_page_fault; -#else /* CONFIG_ARCH_S390X */ +#ifdef CONFIG_ARCH_S390X pgm_check_table[0x38] = &do_dat_exception; pgm_check_table[0x39] = &do_dat_exception; pgm_check_table[0x3A] = &do_dat_exception; @@ -731,12 +714,10 @@ void __init trap_init(void) pgm_check_table[0x40] = &do_monitor_call; if (MACHINE_IS_VM) { +#ifdef CONFIG_PFAULT /* - * First try to get pfault pseudo page faults going. - * If this isn't available turn on pagex page faults. + * Try to get pfault pseudo page faults going. */ -#ifdef CONFIG_PFAULT - /* request the 0x2603 external interrupt */ if (register_early_external_interrupt(0x2603, pfault_interrupt, &ext_int_pfault) != 0) panic("Couldn't request external interrupt 0x2603"); @@ -747,10 +728,6 @@ void __init trap_init(void) /* Tough luck, no pfault. */ unregister_early_external_interrupt(0x2603, pfault_interrupt, &ext_int_pfault); -#endif -#ifndef CONFIG_ARCH_S390X - register_reboot_notifier(&pagex_reboot_notifier); - cpcmd("SET PAGEX ON", NULL, 0, NULL); #endif } } diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index 856a971759b..64e32da7775 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -352,115 +352,6 @@ void do_dat_exception(struct pt_regs *regs, unsigned long error_code) do_exception(regs, error_code & 0xff, 0); } -#ifndef CONFIG_ARCH_S390X - -typedef struct _pseudo_wait_t { - struct _pseudo_wait_t *next; - wait_queue_head_t queue; - unsigned long address; - int resolved; -} pseudo_wait_t; - -static pseudo_wait_t *pseudo_lock_queue = NULL; -static spinlock_t pseudo_wait_spinlock; /* spinlock to protect lock queue */ - -/* - * This routine handles 'pagex' pseudo page faults. - */ -asmlinkage void -do_pseudo_page_fault(struct pt_regs *regs, unsigned long error_code) -{ - pseudo_wait_t wait_struct; - pseudo_wait_t *ptr, *last, *next; - unsigned long address; - - /* - * get the failing address - * more specific the segment and page table portion of - * the address - */ - address = S390_lowcore.trans_exc_code & 0xfffff000; - - if (address & 0x80000000) { - /* high bit set -> a page has been swapped in by VM */ - address &= 0x7fffffff; - spin_lock(&pseudo_wait_spinlock); - last = NULL; - ptr = pseudo_lock_queue; - while (ptr != NULL) { - next = ptr->next; - if (address == ptr->address) { - /* - * This is one of the processes waiting - * for the page. Unchain from the queue. - * There can be more than one process - * waiting for the same page. VM presents - * an initial and a completion interrupt for - * every process that tries to access a - * page swapped out by VM. - */ - if (last == NULL) - pseudo_lock_queue = next; - else - last->next = next; - /* now wake up the process */ - ptr->resolved = 1; - wake_up(&ptr->queue); - } else - last = ptr; - ptr = next; - } - spin_unlock(&pseudo_wait_spinlock); - } else { - /* Pseudo page faults in kernel mode is a bad idea */ - if (!(regs->psw.mask & PSW_MASK_PSTATE)) { - /* - * VM presents pseudo page faults if the interrupted - * state was not disabled for interrupts. So we can - * get pseudo page fault interrupts while running - * in kernel mode. We simply access the page here - * while we are running disabled. VM will then swap - * in the page synchronously. - */ - if (check_user_space(regs, error_code) == 0) - /* dereference a virtual kernel address */ - __asm__ __volatile__ ( - " ic 0,0(%0)" - : : "a" (address) : "0"); - else - /* dereference a virtual user address */ - __asm__ __volatile__ ( - " la 2,0(%0)\n" - " sacf 512\n" - " ic 2,0(2)\n" - "0:sacf 0\n" - ".section __ex_table,\"a\"\n" - " .align 4\n" - " .long 0b,0b\n" - ".previous" - : : "a" (address) : "2" ); - - return; - } - /* initialize and add element to pseudo_lock_queue */ - init_waitqueue_head (&wait_struct.queue); - wait_struct.address = address; - wait_struct.resolved = 0; - spin_lock(&pseudo_wait_spinlock); - wait_struct.next = pseudo_lock_queue; - pseudo_lock_queue = &wait_struct; - spin_unlock(&pseudo_wait_spinlock); - /* - * The instruction that caused the program check will - * be repeated. Don't signal single step via SIGTRAP. - */ - clear_tsk_thread_flag(current, TIF_SINGLE_STEP); - /* go to sleep */ - wait_event(wait_struct.queue, wait_struct.resolved); - } -} -#endif /* CONFIG_ARCH_S390X */ - #ifdef CONFIG_PFAULT /* * 'pfault' pseudo page faults routines. @@ -508,7 +399,7 @@ int pfault_init(void) " .quad 0b,1b\n" #endif /* CONFIG_ARCH_S390X */ ".previous" - : "=d" (rc) : "a" (&refbk) : "cc" ); + : "=d" (rc) : "a" (&refbk), "m" (refbk) : "cc" ); __ctl_set_bit(0, 9); return rc; } @@ -532,7 +423,7 @@ void pfault_fini(void) " .quad 0b,0b\n" #endif /* CONFIG_ARCH_S390X */ ".previous" - : : "a" (&refbk) : "cc" ); + : : "a" (&refbk), "m" (refbk) : "cc" ); } asmlinkage void -- cgit v1.2.3 From 0ad775dbba12de3b7d25f586efe81ad995ca75a7 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 7 Nov 2005 00:59:12 -0800 Subject: [PATCH] s390: merge common parts of head.S and head64.S Merge common parts of head.S and head64.S into head.S and move architecture specific parts to head31.S and head64.S respectively. Saves us ~500 lines of duplicated assembly code. Acked-by: Martin Schwidefsky Signed-off-by: Heiko Carstens Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/s390/Makefile | 4 +- arch/s390/kernel/Makefile | 4 +- arch/s390/kernel/head.S | 382 +++----------------------------- arch/s390/kernel/head31.S | 336 +++++++++++++++++++++++++++++ arch/s390/kernel/head64.S | 538 +--------------------------------------------- 5 files changed, 381 insertions(+), 883 deletions(-) create mode 100644 arch/s390/kernel/head31.S (limited to 'arch') diff --git a/arch/s390/Makefile b/arch/s390/Makefile index 98db30481d9..73a09a6ee6c 100644 --- a/arch/s390/Makefile +++ b/arch/s390/Makefile @@ -76,9 +76,7 @@ AFLAGS += $(aflags-y) OBJCOPYFLAGS := -O binary LDFLAGS_vmlinux := -e start -head-$(CONFIG_ARCH_S390_31) += arch/$(ARCH)/kernel/head.o -head-$(CONFIG_ARCH_S390X) += arch/$(ARCH)/kernel/head64.o -head-y += arch/$(ARCH)/kernel/init_task.o +head-y := arch/$(ARCH)/kernel/head.o arch/$(ARCH)/kernel/init_task.o core-y += arch/$(ARCH)/mm/ arch/$(ARCH)/kernel/ arch/$(ARCH)/crypto/ \ arch/$(ARCH)/appldata/ diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile index 8584dd82321..7434c32bc63 100644 --- a/arch/s390/kernel/Makefile +++ b/arch/s390/kernel/Makefile @@ -8,9 +8,7 @@ obj-y := bitmap.o traps.o time.o process.o \ setup.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o \ semaphore.o s390_ext.o debug.o profile.o irq.o reipl_diag.o -extra-$(CONFIG_ARCH_S390_31) += head.o -extra-$(CONFIG_ARCH_S390X) += head64.o -extra-y += init_task.o vmlinux.lds +extra-y += head.o init_task.o vmlinux.lds obj-$(CONFIG_MODULES) += s390_ksyms.o module.o obj-$(CONFIG_SMP) += smp.o diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S index 4ca02933211..d31a97c89f6 100644 --- a/arch/s390/kernel/head.S +++ b/arch/s390/kernel/head.S @@ -1,11 +1,12 @@ /* * arch/s390/kernel/head.S * - * S390 version - * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Hartmut Penner (hp@de.ibm.com), - * Martin Schwidefsky (schwidefsky@de.ibm.com), - * Rob van der Heij (rvdhei@iae.nl) + * (C) Copyright IBM Corp. 1999, 2005 + * + * Author(s): Hartmut Penner + * Martin Schwidefsky + * Rob van der Heij + * Heiko Carstens * * There are 5 different IPL methods * 1) load the image directly into ram at address 0 and do an PSW restart @@ -19,12 +20,7 @@ * 5) direct call of start by the SALIPL loader * We use the cpuid to distinguish between VM and native ipl * params for kernel are pushed to 0x10400 (see setup.h) - - Changes: - Okt 25 2000 - added code to skip HDR and EOF to allow SL tape IPL (5 retries) - changed first CCW from rewind to backspace block - + * */ #include @@ -34,6 +30,12 @@ #include #include +#ifdef CONFIG_ARCH_S390X +#define ARCH_OFFSET 4 +#else +#define ARCH_OFFSET 0 +#endif + #ifndef CONFIG_IPL .org 0 .long 0x00080000,0x80000000+startup # Just a restart PSW @@ -201,7 +203,7 @@ ssch 0(%r3) # load chunk of 1600 bytes bnz .Llderr .Lwait4irq: - mvc __LC_IO_NEW_PSW(8),.Lnewpsw # set up IO interrupt psw + mvc 0x78(8),.Lnewpsw # set up IO interrupt psw lpsw .Lwaitpsw .Lioint: c %r1,0xb8 # compare subchannel number @@ -265,13 +267,13 @@ iplstart: la %r2,IPL_BS # load start address bas %r14,.Lloader # load rest of ipl image l %r12,.Lparm # pointer to parameter area - st %r1,IPL_DEVICE-PARMAREA(%r12) # store ipl device number + st %r1,IPL_DEVICE+ARCH_OFFSET-PARMAREA(%r12) # save ipl device number # # load parameter file from ipl device # .Lagain1: - l %r2,INITRD_START-PARMAREA(%r12) # use ramdisk location as temp + l %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) # ramdisk loc. is temp bas %r14,.Lloader # load parameter file ltr %r2,%r2 # got anything ? bz .Lnopf @@ -279,7 +281,7 @@ iplstart: bnh .Lnotrunc la %r2,895 .Lnotrunc: - l %r4,INITRD_START-PARMAREA(%r12) + l %r4,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) clc 0(3,%r4),.L_hdr # if it is HDRx bz .Lagain1 # skip dataset header clc 0(3,%r4),.L_eof # if it is EOFx @@ -322,14 +324,14 @@ iplstart: # load ramdisk from ipl device # .Lagain2: - l %r2,INITRD_START-PARMAREA(%r12) # load adr. of ramdisk + l %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) # addr of ramdisk bas %r14,.Lloader # load ramdisk - st %r2,INITRD_SIZE-PARMAREA(%r12) # store size of ramdisk + st %r2,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r12) # store size of ramdisk ltr %r2,%r2 bnz .Lrdcont - st %r2,INITRD_START-PARMAREA(%r12) # no ramdisk found, null it + st %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) # no ramdisk found .Lrdcont: - l %r2,INITRD_START-PARMAREA(%r12) + l %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) clc 0(3,%r2),.L_hdr # skip HDRx and EOFx bz .Lagain2 @@ -432,10 +434,10 @@ start: la %r3,1(%r3) .done: l %r1,.memsize - st %r3,0(%r1) + st %r3,ARCH_OFFSET(%r1) slr %r0,%r0 - st %r0,INITRD_SIZE-PARMAREA(%r11) - st %r0,INITRD_START-PARMAREA(%r11) + st %r0,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r11) + st %r0,INITRD_START+ARCH_OFFSET-PARMAREA(%r11) j startup # continue with startup .tbl: .long _ebcasc # translate table .cmd: .long COMMAND_LINE # address of command line buffer @@ -478,303 +480,23 @@ start: .byte 0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7 .byte 0xf8,0xf9,0xfa,0xfb,0xfc,0xfd,0xfe,0xff -# -# startup-code at 0x10000, running in real mode -# this is called either by the ipl loader or directly by PSW restart -# or linload or SALIPL -# - .org 0x10000 -startup:basr %r13,0 # get base -.LPG1: l %r1, .Lget_ipl_device_addr-.LPG1(%r13) - basr %r14, %r1 - lctl %c0,%c15,.Lctl-.LPG1(%r13) # load control registers - la %r12,_pstart-.LPG1(%r13) # pointer to parameter area - # move IPL device to lowcore - mvc __LC_IPLDEV(4),IPL_DEVICE-PARMAREA(%r12) - -# -# clear bss memory -# - l %r2,.Lbss_bgn-.LPG1(%r13) # start of bss - l %r3,.Lbss_end-.LPG1(%r13) # end of bss - sr %r3,%r2 # length of bss - sr %r4,%r4 # - sr %r5,%r5 # set src,length and pad to zero - sr %r0,%r0 # - mvcle %r2,%r4,0 # clear mem - jo .-4 # branch back, if not finish - - l %r2,.Lrcp-.LPG1(%r13) # Read SCP forced command word -.Lservicecall: - stosm .Lpmask-.LPG1(%r13),0x01 # authorize ext interrupts - - stctl %r0, %r0,.Lcr-.LPG1(%r13) # get cr0 - la %r1,0x200 # set bit 22 - o %r1,.Lcr-.LPG1(%r13) # or old cr0 with r1 - st %r1,.Lcr-.LPG1(%r13) - lctl %r0, %r0,.Lcr-.LPG1(%r13) # load modified cr0 - - mvc __LC_EXT_NEW_PSW(8),.Lpcext-.LPG1(%r13) # set postcall psw - la %r1, .Lsclph-.LPG1(%r13) - a %r1,__LC_EXT_NEW_PSW+4 # set handler - st %r1,__LC_EXT_NEW_PSW+4 - - la %r4,_pstart-.LPG1(%r13) # %r4 is our index for sccb stuff - la %r1, .Lsccb-PARMAREA(%r4) # our sccb - .insn rre,0xb2200000,%r2,%r1 # service call - ipm %r1 - srl %r1,28 # get cc code - xr %r3, %r3 - chi %r1,3 - be .Lfchunk-.LPG1(%r13) # leave - chi %r1,2 - be .Lservicecall-.LPG1(%r13) - lpsw .Lwaitsclp-.LPG1(%r13) -.Lsclph: - lh %r1,.Lsccbr-PARMAREA(%r4) - chi %r1,0x10 # 0x0010 is the sucess code - je .Lprocsccb # let's process the sccb - chi %r1,0x1f0 - bne .Lfchunk-.LPG1(%r13) # unhandled error code - c %r2, .Lrcp-.LPG1(%r13) # Did we try Read SCP forced - bne .Lfchunk-.LPG1(%r13) # if no, give up - l %r2, .Lrcp2-.LPG1(%r13) # try with Read SCP - b .Lservicecall-.LPG1(%r13) -.Lprocsccb: - lhi %r1,0 - icm %r1,3,.Lscpincr1-PARMAREA(%r4) # use this one if != 0 - jnz .Lscnd - lhi %r1,0x800 # otherwise report 2GB -.Lscnd: - lhi %r3,0x800 # limit reported memory size to 2GB - cr %r1,%r3 - jl .Lno2gb - lr %r1,%r3 -.Lno2gb: - xr %r3,%r3 # same logic - ic %r3,.Lscpa1-PARMAREA(%r4) - chi %r3,0x00 - jne .Lcompmem - l %r3,.Lscpa2-PARMAREA(%r13) -.Lcompmem: - mr %r2,%r1 # mem in MB on 128-bit - l %r1,.Lonemb-.LPG1(%r13) - mr %r2,%r1 # mem size in bytes in %r3 - b .Lfchunk-.LPG1(%r13) - - .align 4 -.Lget_ipl_device_addr: - .long .Lget_ipl_device -.Lpmask: - .byte 0 -.align 8 -.Lpcext:.long 0x00080000,0x80000000 -.Lcr: - .long 0x00 # place holder for cr0 -.Lwaitsclp: - .long 0x010a0000,0x80000000 + .Lsclph -.Lrcp: - .int 0x00120001 # Read SCP forced code -.Lrcp2: - .int 0x00020001 # Read SCP code -.Lonemb: - .int 0x100000 -.Lfchunk: - -# -# find memory chunks. -# - lr %r9,%r3 # end of mem - mvc __LC_PGM_NEW_PSW(8),.Lpcmem-.LPG1(%r13) - la %r1,1 # test in increments of 128KB - sll %r1,17 - l %r3,.Lmchunk-.LPG1(%r13) # get pointer to memory_chunk array - slr %r4,%r4 # set start of chunk to zero - slr %r5,%r5 # set end of chunk to zero - slr %r6,%r6 # set access code to zero - la %r10, MEMORY_CHUNKS # number of chunks -.Lloop: - tprot 0(%r5),0 # test protection of first byte - ipm %r7 - srl %r7,28 - clr %r6,%r7 # compare cc with last access code - be .Lsame-.LPG1(%r13) - b .Lchkmem-.LPG1(%r13) -.Lsame: - ar %r5,%r1 # add 128KB to end of chunk - bno .Lloop-.LPG1(%r13) # r1 < 0x80000000 -> loop -.Lchkmem: # > 2GB or tprot got a program check - clr %r4,%r5 # chunk size > 0? - be .Lchkloop-.LPG1(%r13) - st %r4,0(%r3) # store start address of chunk - lr %r0,%r5 - slr %r0,%r4 - st %r0,4(%r3) # store size of chunk - st %r6,8(%r3) # store type of chunk - la %r3,12(%r3) - l %r4,.Lmemsize-.LPG1(%r13) # address of variable memory_size - st %r5,0(%r4) # store last end to memory size - ahi %r10,-1 # update chunk number -.Lchkloop: - lr %r6,%r7 # set access code to last cc - # we got an exception or we're starting a new - # chunk , we must check if we should - # still try to find valid memory (if we detected - # the amount of available storage), and if we - # have chunks left - xr %r0,%r0 - clr %r0,%r9 # did we detect memory? - je .Ldonemem # if not, leave - chi %r10,0 # do we have chunks left? - je .Ldonemem - alr %r5,%r1 # add 128KB to end of chunk - lr %r4,%r5 # potential new chunk - clr %r5,%r9 # should we go on? - jl .Lloop -.Ldonemem: - l %r12,.Lmflags-.LPG1(%r13) # get address of machine_flags -# -# find out if we are running under VM -# - stidp __LC_CPUID # store cpuid - tm __LC_CPUID,0xff # running under VM ? - bno .Lnovm-.LPG1(%r13) - oi 3(%r12),1 # set VM flag -.Lnovm: - lh %r0,__LC_CPUID+4 # get cpu version - chi %r0,0x7490 # running on a P/390 ? - bne .Lnop390-.LPG1(%r13) - oi 3(%r12),4 # set P/390 flag -.Lnop390: - -# -# find out if we have an IEEE fpu -# - mvc __LC_PGM_NEW_PSW(8),.Lpcfpu-.LPG1(%r13) - efpc %r0,0 # test IEEE extract fpc instruction - oi 3(%r12),2 # set IEEE fpu flag -.Lchkfpu: - -# -# find out if we have the CSP instruction -# - mvc __LC_PGM_NEW_PSW(8),.Lpccsp-.LPG1(%r13) - la %r0,0 - lr %r1,%r0 - la %r2,4 - csp %r0,%r2 # Test CSP instruction - oi 3(%r12),8 # set CSP flag -.Lchkcsp: - -# -# find out if we have the MVPG instruction -# - mvc __LC_PGM_NEW_PSW(8),.Lpcmvpg-.LPG1(%r13) - sr %r0,%r0 - la %r1,0 - la %r2,0 - mvpg %r1,%r2 # Test CSP instruction - oi 3(%r12),16 # set MVPG flag -.Lchkmvpg: - -# -# find out if we have the IDTE instruction -# - mvc __LC_PGM_NEW_PSW(8),.Lpcidte-.LPG1(%r13) - .long 0xb2b10000 # store facility list - tm 0xc8,0x08 # check bit for clearing-by-ASCE - bno .Lchkidte-.LPG1(%r13) - lhi %r1,2094 - lhi %r2,0 - .long 0xb98e2001 - oi 3(%r12),0x80 # set IDTE flag -.Lchkidte: - - lpsw .Lentry-.LPG1(13) # jump to _stext in primary-space, - # virtual and never return ... - .align 8 -.Lentry:.long 0x00080000,0x80000000 + _stext -.Lctl: .long 0x04b50002 # cr0: various things - .long 0 # cr1: primary space segment table - .long .Lduct # cr2: dispatchable unit control table - .long 0 # cr3: instruction authorization - .long 0 # cr4: instruction authorization - .long 0xffffffff # cr5: primary-aste origin - .long 0 # cr6: I/O interrupts - .long 0 # cr7: secondary space segment table - .long 0 # cr8: access registers translation - .long 0 # cr9: tracing off - .long 0 # cr10: tracing off - .long 0 # cr11: tracing off - .long 0 # cr12: tracing off - .long 0 # cr13: home space segment table - .long 0xc0000000 # cr14: machine check handling off - .long 0 # cr15: linkage stack operations -.Lpcmem:.long 0x00080000,0x80000000 + .Lchkmem -.Lpcfpu:.long 0x00080000,0x80000000 + .Lchkfpu -.Lpccsp:.long 0x00080000,0x80000000 + .Lchkcsp -.Lpcmvpg:.long 0x00080000,0x80000000 + .Lchkmvpg -.Lpcidte:.long 0x00080000,0x80000000 + .Lchkidte -.Lmemsize:.long memory_size -.Lmchunk:.long memory_chunk -.Lmflags:.long machine_flags -.Lbss_bgn: .long __bss_start -.Lbss_end: .long _end - - .org PARMAREA-64 -.Lduct: .long 0,0,0,0,0,0,0,0 - .long 0,0,0,0,0,0,0,0 - -# -# params at 10400 (setup.h) -# - .org PARMAREA - .global _pstart -_pstart: - .long 0,0 # IPL_DEVICE - .long 0,RAMDISK_ORIGIN # INITRD_START - .long 0,RAMDISK_SIZE # INITRD_SIZE - - .org COMMAND_LINE - .byte "root=/dev/ram0 ro" - .byte 0 - .org 0x11000 -.Lsccb: - .hword 0x1000 # length, one page - .byte 0x00,0x00,0x00 - .byte 0x80 # variable response bit set -.Lsccbr: - .hword 0x00 # response code -.Lscpincr1: - .hword 0x00 -.Lscpa1: - .byte 0x00 - .fill 89,1,0 -.Lscpa2: - .int 0x00 -.Lscpincr2: - .quad 0x00 - .fill 3984,1,0 - .org 0x12000 - .global _pend -_pend: - +.macro GET_IPL_DEVICE .Lget_ipl_device: basr %r12,0 -.LPG2: l %r1,0xb8 # get sid +.LGID: l %r1,0xb8 # get sid sll %r1,15 # test if subchannel is enabled srl %r1,31 ltr %r1,%r1 bz 0(%r14) # subchannel disabled l %r1,0xb8 - la %r5,.Lipl_schib-.LPG2(%r12) + la %r5,.Lipl_schib-.LGID(%r12) stsch 0(%r5) # get schib of subchannel bnz 0(%r14) # schib not available tm 5(%r5),0x01 # devno valid? bno 0(%r14) - la %r6,ipl_parameter_flags-.LPG2(%r12) + la %r6,ipl_parameter_flags-.LGID(%r12) oi 3(%r6),0x01 # set flag - la %r2,ipl_devno-.LPG2(%r12) + la %r2,ipl_devno-.LGID(%r12) mvc 0(2,%r2),6(%r5) # store devno tm 4(%r5),0x80 # qdio capable device? bno 0(%r14) @@ -815,46 +537,10 @@ ipl_parameter_flags: .globl ipl_devno ipl_devno: .word 0 +.endm -#ifdef CONFIG_SHARED_KERNEL - .org 0x100000 +#ifdef CONFIG_ARCH_S390X +#include "head64.S" +#else +#include "head31.S" #endif - -# -# startup-code, running in virtual mode -# - .globl _stext -_stext: basr %r13,0 # get base -.LPG3: -# -# Setup stack -# - l %r15,.Linittu-.LPG3(%r13) - mvc __LC_CURRENT(4),__TI_task(%r15) - ahi %r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union + THREAD_SIZE - st %r15,__LC_KERNEL_STACK # set end of kernel stack - ahi %r15,-96 - xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear backchain - -# check control registers - stctl %c0,%c15,0(%r15) - oi 2(%r15),0x40 # enable sigp emergency signal - oi 0(%r15),0x10 # switch on low address protection - lctl %c0,%c15,0(%r15) - -# - lam 0,15,.Laregs-.LPG3(%r13) # load access regs needed by uaccess - l %r14,.Lstart-.LPG3(%r13) - basr %r14,%r14 # call start_kernel -# -# We returned from start_kernel ?!? PANIK -# - basr %r13,0 - lpsw .Ldw-.(%r13) # load disabled wait psw -# - .align 8 -.Ldw: .long 0x000a0000,0x00000000 -.Linittu: .long init_thread_union -.Lstart: .long start_kernel -.Laregs: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 - diff --git a/arch/s390/kernel/head31.S b/arch/s390/kernel/head31.S new file mode 100644 index 00000000000..2d3b089bfb8 --- /dev/null +++ b/arch/s390/kernel/head31.S @@ -0,0 +1,336 @@ +/* + * arch/s390/kernel/head31.S + * + * (C) Copyright IBM Corp. 2005 + * + * Author(s): Hartmut Penner + * Martin Schwidefsky + * Rob van der Heij + * Heiko Carstens + * + */ + +# +# startup-code at 0x10000, running in absolute addressing mode +# this is called either by the ipl loader or directly by PSW restart +# or linload or SALIPL +# + .org 0x10000 +startup:basr %r13,0 # get base +.LPG1: l %r1, .Lget_ipl_device_addr-.LPG1(%r13) + basr %r14, %r1 + lctl %c0,%c15,.Lctl-.LPG1(%r13) # load control registers + la %r12,_pstart-.LPG1(%r13) # pointer to parameter area + # move IPL device to lowcore + mvc __LC_IPLDEV(4),IPL_DEVICE-PARMAREA(%r12) + +# +# clear bss memory +# + l %r2,.Lbss_bgn-.LPG1(%r13) # start of bss + l %r3,.Lbss_end-.LPG1(%r13) # end of bss + sr %r3,%r2 # length of bss + sr %r4,%r4 + sr %r5,%r5 # set src,length and pad to zero + sr %r0,%r0 + mvcle %r2,%r4,0 # clear mem + jo .-4 # branch back, if not finish + + l %r2,.Lrcp-.LPG1(%r13) # Read SCP forced command word +.Lservicecall: + stosm .Lpmask-.LPG1(%r13),0x01 # authorize ext interrupts + + stctl %r0, %r0,.Lcr-.LPG1(%r13) # get cr0 + la %r1,0x200 # set bit 22 + o %r1,.Lcr-.LPG1(%r13) # or old cr0 with r1 + st %r1,.Lcr-.LPG1(%r13) + lctl %r0, %r0,.Lcr-.LPG1(%r13) # load modified cr0 + + mvc __LC_EXT_NEW_PSW(8),.Lpcext-.LPG1(%r13) # set postcall psw + la %r1, .Lsclph-.LPG1(%r13) + a %r1,__LC_EXT_NEW_PSW+4 # set handler + st %r1,__LC_EXT_NEW_PSW+4 + + la %r4,_pstart-.LPG1(%r13) # %r4 is our index for sccb stuff + la %r1, .Lsccb-PARMAREA(%r4) # our sccb + .insn rre,0xb2200000,%r2,%r1 # service call + ipm %r1 + srl %r1,28 # get cc code + xr %r3, %r3 + chi %r1,3 + be .Lfchunk-.LPG1(%r13) # leave + chi %r1,2 + be .Lservicecall-.LPG1(%r13) + lpsw .Lwaitsclp-.LPG1(%r13) +.Lsclph: + lh %r1,.Lsccbr-PARMAREA(%r4) + chi %r1,0x10 # 0x0010 is the sucess code + je .Lprocsccb # let's process the sccb + chi %r1,0x1f0 + bne .Lfchunk-.LPG1(%r13) # unhandled error code + c %r2, .Lrcp-.LPG1(%r13) # Did we try Read SCP forced + bne .Lfchunk-.LPG1(%r13) # if no, give up + l %r2, .Lrcp2-.LPG1(%r13) # try with Read SCP + b .Lservicecall-.LPG1(%r13) +.Lprocsccb: + lhi %r1,0 + icm %r1,3,.Lscpincr1-PARMAREA(%r4) # use this one if != 0 + jnz .Lscnd + lhi %r1,0x800 # otherwise report 2GB +.Lscnd: + lhi %r3,0x800 # limit reported memory size to 2GB + cr %r1,%r3 + jl .Lno2gb + lr %r1,%r3 +.Lno2gb: + xr %r3,%r3 # same logic + ic %r3,.Lscpa1-PARMAREA(%r4) + chi %r3,0x00 + jne .Lcompmem + l %r3,.Lscpa2-PARMAREA(%r13) +.Lcompmem: + mr %r2,%r1 # mem in MB on 128-bit + l %r1,.Lonemb-.LPG1(%r13) + mr %r2,%r1 # mem size in bytes in %r3 + b .Lfchunk-.LPG1(%r13) + + .align 4 +.Lget_ipl_device_addr: + .long .Lget_ipl_device +.Lpmask: + .byte 0 +.align 8 +.Lpcext:.long 0x00080000,0x80000000 +.Lcr: + .long 0x00 # place holder for cr0 +.Lwaitsclp: + .long 0x010a0000,0x80000000 + .Lsclph +.Lrcp: + .int 0x00120001 # Read SCP forced code +.Lrcp2: + .int 0x00020001 # Read SCP code +.Lonemb: + .int 0x100000 +.Lfchunk: + +# +# find memory chunks. +# + lr %r9,%r3 # end of mem + mvc __LC_PGM_NEW_PSW(8),.Lpcmem-.LPG1(%r13) + la %r1,1 # test in increments of 128KB + sll %r1,17 + l %r3,.Lmchunk-.LPG1(%r13) # get pointer to memory_chunk array + slr %r4,%r4 # set start of chunk to zero + slr %r5,%r5 # set end of chunk to zero + slr %r6,%r6 # set access code to zero + la %r10, MEMORY_CHUNKS # number of chunks +.Lloop: + tprot 0(%r5),0 # test protection of first byte + ipm %r7 + srl %r7,28 + clr %r6,%r7 # compare cc with last access code + be .Lsame-.LPG1(%r13) + b .Lchkmem-.LPG1(%r13) +.Lsame: + ar %r5,%r1 # add 128KB to end of chunk + bno .Lloop-.LPG1(%r13) # r1 < 0x80000000 -> loop +.Lchkmem: # > 2GB or tprot got a program check + clr %r4,%r5 # chunk size > 0? + be .Lchkloop-.LPG1(%r13) + st %r4,0(%r3) # store start address of chunk + lr %r0,%r5 + slr %r0,%r4 + st %r0,4(%r3) # store size of chunk + st %r6,8(%r3) # store type of chunk + la %r3,12(%r3) + l %r4,.Lmemsize-.LPG1(%r13) # address of variable memory_size + st %r5,0(%r4) # store last end to memory size + ahi %r10,-1 # update chunk number +.Lchkloop: + lr %r6,%r7 # set access code to last cc + # we got an exception or we're starting a new + # chunk , we must check if we should + # still try to find valid memory (if we detected + # the amount of available storage), and if we + # have chunks left + xr %r0,%r0 + clr %r0,%r9 # did we detect memory? + je .Ldonemem # if not, leave + chi %r10,0 # do we have chunks left? + je .Ldonemem + alr %r5,%r1 # add 128KB to end of chunk + lr %r4,%r5 # potential new chunk + clr %r5,%r9 # should we go on? + jl .Lloop +.Ldonemem: + l %r12,.Lmflags-.LPG1(%r13) # get address of machine_flags +# +# find out if we are running under VM +# + stidp __LC_CPUID # store cpuid + tm __LC_CPUID,0xff # running under VM ? + bno .Lnovm-.LPG1(%r13) + oi 3(%r12),1 # set VM flag +.Lnovm: + lh %r0,__LC_CPUID+4 # get cpu version + chi %r0,0x7490 # running on a P/390 ? + bne .Lnop390-.LPG1(%r13) + oi 3(%r12),4 # set P/390 flag +.Lnop390: + +# +# find out if we have an IEEE fpu +# + mvc __LC_PGM_NEW_PSW(8),.Lpcfpu-.LPG1(%r13) + efpc %r0,0 # test IEEE extract fpc instruction + oi 3(%r12),2 # set IEEE fpu flag +.Lchkfpu: + +# +# find out if we have the CSP instruction +# + mvc __LC_PGM_NEW_PSW(8),.Lpccsp-.LPG1(%r13) + la %r0,0 + lr %r1,%r0 + la %r2,4 + csp %r0,%r2 # Test CSP instruction + oi 3(%r12),8 # set CSP flag +.Lchkcsp: + +# +# find out if we have the MVPG instruction +# + mvc __LC_PGM_NEW_PSW(8),.Lpcmvpg-.LPG1(%r13) + sr %r0,%r0 + la %r1,0 + la %r2,0 + mvpg %r1,%r2 # Test CSP instruction + oi 3(%r12),16 # set MVPG flag +.Lchkmvpg: + +# +# find out if we have the IDTE instruction +# + mvc __LC_PGM_NEW_PSW(8),.Lpcidte-.LPG1(%r13) + .long 0xb2b10000 # store facility list + tm 0xc8,0x08 # check bit for clearing-by-ASCE + bno .Lchkidte-.LPG1(%r13) + lhi %r1,2094 + lhi %r2,0 + .long 0xb98e2001 + oi 3(%r12),0x80 # set IDTE flag +.Lchkidte: + + lpsw .Lentry-.LPG1(13) # jump to _stext in primary-space, + # virtual and never return ... + .align 8 +.Lentry:.long 0x00080000,0x80000000 + _stext +.Lctl: .long 0x04b50002 # cr0: various things + .long 0 # cr1: primary space segment table + .long .Lduct # cr2: dispatchable unit control table + .long 0 # cr3: instruction authorization + .long 0 # cr4: instruction authorization + .long 0xffffffff # cr5: primary-aste origin + .long 0 # cr6: I/O interrupts + .long 0 # cr7: secondary space segment table + .long 0 # cr8: access registers translation + .long 0 # cr9: tracing off + .long 0 # cr10: tracing off + .long 0 # cr11: tracing off + .long 0 # cr12: tracing off + .long 0 # cr13: home space segment table + .long 0xc0000000 # cr14: machine check handling off + .long 0 # cr15: linkage stack operations +.Lpcmem:.long 0x00080000,0x80000000 + .Lchkmem +.Lpcfpu:.long 0x00080000,0x80000000 + .Lchkfpu +.Lpccsp:.long 0x00080000,0x80000000 + .Lchkcsp +.Lpcmvpg:.long 0x00080000,0x80000000 + .Lchkmvpg +.Lpcidte:.long 0x00080000,0x80000000 + .Lchkidte +.Lmemsize:.long memory_size +.Lmchunk:.long memory_chunk +.Lmflags:.long machine_flags +.Lbss_bgn: .long __bss_start +.Lbss_end: .long _end + + .org PARMAREA-64 +.Lduct: .long 0,0,0,0,0,0,0,0 + .long 0,0,0,0,0,0,0,0 + +# +# params at 10400 (setup.h) +# + .org PARMAREA + .global _pstart +_pstart: + .long 0,0 # IPL_DEVICE + .long 0,RAMDISK_ORIGIN # INITRD_START + .long 0,RAMDISK_SIZE # INITRD_SIZE + + .org COMMAND_LINE + .byte "root=/dev/ram0 ro" + .byte 0 + .org 0x11000 +.Lsccb: + .hword 0x1000 # length, one page + .byte 0x00,0x00,0x00 + .byte 0x80 # variable response bit set +.Lsccbr: + .hword 0x00 # response code +.Lscpincr1: + .hword 0x00 +.Lscpa1: + .byte 0x00 + .fill 89,1,0 +.Lscpa2: + .int 0x00 +.Lscpincr2: + .quad 0x00 + .fill 3984,1,0 + .org 0x12000 + .global _pend +_pend: + + GET_IPL_DEVICE + +#ifdef CONFIG_SHARED_KERNEL + .org 0x100000 +#endif + +# +# startup-code, running in virtual mode +# + .globl _stext +_stext: basr %r13,0 # get base +.LPG3: +# +# Setup stack +# + l %r15,.Linittu-.LPG3(%r13) + mvc __LC_CURRENT(4),__TI_task(%r15) + ahi %r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union+THREAD_SIZE + st %r15,__LC_KERNEL_STACK # set end of kernel stack + ahi %r15,-96 + xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear backchain + +# check control registers + stctl %c0,%c15,0(%r15) + oi 2(%r15),0x40 # enable sigp emergency signal + oi 0(%r15),0x10 # switch on low address protection + lctl %c0,%c15,0(%r15) + +# + lam 0,15,.Laregs-.LPG3(%r13) # load access regs needed by uaccess + l %r14,.Lstart-.LPG3(%r13) + basr %r14,%r14 # call start_kernel +# +# We returned from start_kernel ?!? PANIK +# + basr %r13,0 + lpsw .Ldw-.(%r13) # load disabled wait psw +# + .align 8 +.Ldw: .long 0x000a0000,0x00000000 +.Linittu:.long init_thread_union +.Lstart:.long start_kernel +.Laregs:.long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S index d9be8f96f2e..f08c06f45d5 100644 --- a/arch/s390/kernel/head64.S +++ b/arch/s390/kernel/head64.S @@ -1,482 +1,17 @@ /* - * arch/s390/kernel/head.S + * arch/s390/kernel/head64.S * - * S390 version - * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Hartmut Penner (hp@de.ibm.com), - * Martin Schwidefsky (schwidefsky@de.ibm.com), - * Rob van der Heij (rvdhei@iae.nl) + * (C) Copyright IBM Corp. 1999,2005 + * + * Author(s): Hartmut Penner + * Martin Schwidefsky + * Rob van der Heij + * Heiko Carstens * - * There are 5 different IPL methods - * 1) load the image directly into ram at address 0 and do an PSW restart - * 2) linload will load the image from address 0x10000 to memory 0x10000 - * and start the code thru LPSW 0x0008000080010000 (VM only, deprecated) - * 3) generate the tape ipl header, store the generated image on a tape - * and ipl from it - * In case of SL tape you need to IPL 5 times to get past VOL1 etc - * 4) generate the vm reader ipl header, move the generated image to the - * VM reader (use option NOH!) and do a ipl from reader (VM only) - * 5) direct call of start by the SALIPL loader - * We use the cpuid to distinguish between VM and native ipl - * params for kernel are pushed to 0x10400 (see setup.h) - - Changes: - Okt 25 2000 - added code to skip HDR and EOF to allow SL tape IPL (5 retries) - changed first CCW from rewind to backspace block - */ -#include -#include -#include -#include -#include -#include - -#ifndef CONFIG_IPL - .org 0 - .long 0x00080000,0x80000000+startup # Just a restart PSW -#else -#ifdef CONFIG_IPL_TAPE -#define IPL_BS 1024 - .org 0 - .long 0x00080000,0x80000000+iplstart # The first 24 bytes are loaded - .long 0x27000000,0x60000001 # by ipl to addresses 0-23. - .long 0x02000000,0x20000000+IPL_BS # (a PSW and two CCWs). - .long 0x00000000,0x00000000 # external old psw - .long 0x00000000,0x00000000 # svc old psw - .long 0x00000000,0x00000000 # program check old psw - .long 0x00000000,0x00000000 # machine check old psw - .long 0x00000000,0x00000000 # io old psw - .long 0x00000000,0x00000000 - .long 0x00000000,0x00000000 - .long 0x00000000,0x00000000 - .long 0x000a0000,0x00000058 # external new psw - .long 0x000a0000,0x00000060 # svc new psw - .long 0x000a0000,0x00000068 # program check new psw - .long 0x000a0000,0x00000070 # machine check new psw - .long 0x00080000,0x80000000+.Lioint # io new psw - - .org 0x100 -# -# subroutine for loading from tape -# Paramters: -# R1 = device number -# R2 = load address -.Lloader: - st %r14,.Lldret - la %r3,.Lorbread # r3 = address of orb - la %r5,.Lirb # r5 = address of irb - st %r2,.Lccwread+4 # initialize CCW data addresses - lctl %c6,%c6,.Lcr6 - slr %r2,%r2 -.Lldlp: - la %r6,3 # 3 retries -.Lssch: - ssch 0(%r3) # load chunk of IPL_BS bytes - bnz .Llderr -.Lw4end: - bas %r14,.Lwait4io - tm 8(%r5),0x82 # do we have a problem ? - bnz .Lrecov - slr %r7,%r7 - icm %r7,3,10(%r5) # get residual count - lcr %r7,%r7 - la %r7,IPL_BS(%r7) # IPL_BS-residual=#bytes read - ar %r2,%r7 # add to total size - tm 8(%r5),0x01 # found a tape mark ? - bnz .Ldone - l %r0,.Lccwread+4 # update CCW data addresses - ar %r0,%r7 - st %r0,.Lccwread+4 - b .Lldlp -.Ldone: - l %r14,.Lldret - br %r14 # r2 contains the total size -.Lrecov: - bas %r14,.Lsense # do the sensing - bct %r6,.Lssch # dec. retry count & branch - b .Llderr -# -# Sense subroutine -# -.Lsense: - st %r14,.Lsnsret - la %r7,.Lorbsense - ssch 0(%r7) # start sense command - bnz .Llderr - bas %r14,.Lwait4io - l %r14,.Lsnsret - tm 8(%r5),0x82 # do we have a problem ? - bnz .Llderr - br %r14 -# -# Wait for interrupt subroutine -# -.Lwait4io: - lpsw .Lwaitpsw -.Lioint: - c %r1,0xb8 # compare subchannel number - bne .Lwait4io - tsch 0(%r5) - slr %r0,%r0 - tm 8(%r5),0x82 # do we have a problem ? - bnz .Lwtexit - tm 8(%r5),0x04 # got device end ? - bz .Lwait4io -.Lwtexit: - br %r14 -.Llderr: - lpsw .Lcrash - - .align 8 -.Lorbread: - .long 0x00000000,0x0080ff00,.Lccwread - .align 8 -.Lorbsense: - .long 0x00000000,0x0080ff00,.Lccwsense - .align 8 -.Lccwread: - .long 0x02200000+IPL_BS,0x00000000 -.Lccwsense: - .long 0x04200001,0x00000000 -.Lwaitpsw: - .long 0x020a0000,0x80000000+.Lioint - -.Lirb: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 -.Lcr6: .long 0xff000000 - .align 8 -.Lcrash:.long 0x000a0000,0x00000000 -.Lldret:.long 0 -.Lsnsret: .long 0 -#endif /* CONFIG_IPL_TAPE */ - -#ifdef CONFIG_IPL_VM -#define IPL_BS 0x730 - .org 0 - .long 0x00080000,0x80000000+iplstart # The first 24 bytes are loaded - .long 0x02000018,0x60000050 # by ipl to addresses 0-23. - .long 0x02000068,0x60000050 # (a PSW and two CCWs). - .fill 80-24,1,0x40 # bytes 24-79 are discarded !! - .long 0x020000f0,0x60000050 # The next 160 byte are loaded - .long 0x02000140,0x60000050 # to addresses 0x18-0xb7 - .long 0x02000190,0x60000050 # They form the continuation - .long 0x020001e0,0x60000050 # of the CCW program started - .long 0x02000230,0x60000050 # by ipl and load the range - .long 0x02000280,0x60000050 # 0x0f0-0x730 from the image - .long 0x020002d0,0x60000050 # to the range 0x0f0-0x730 - .long 0x02000320,0x60000050 # in memory. At the end of - .long 0x02000370,0x60000050 # the channel program the PSW - .long 0x020003c0,0x60000050 # at location 0 is loaded. - .long 0x02000410,0x60000050 # Initial processing starts - .long 0x02000460,0x60000050 # at 0xf0 = iplstart. - .long 0x020004b0,0x60000050 - .long 0x02000500,0x60000050 - .long 0x02000550,0x60000050 - .long 0x020005a0,0x60000050 - .long 0x020005f0,0x60000050 - .long 0x02000640,0x60000050 - .long 0x02000690,0x60000050 - .long 0x020006e0,0x20000050 - - .org 0xf0 -# -# subroutine for loading cards from the reader -# -.Lloader: - la %r3,.Lorb # r2 = address of orb into r2 - la %r5,.Lirb # r4 = address of irb - la %r6,.Lccws - la %r7,20 -.Linit: - st %r2,4(%r6) # initialize CCW data addresses - la %r2,0x50(%r2) - la %r6,8(%r6) - bct 7,.Linit - - lctl %c6,%c6,.Lcr6 # set IO subclass mask - slr %r2,%r2 -.Lldlp: - ssch 0(%r3) # load chunk of 1600 bytes - bnz .Llderr -.Lwait4irq: - mvc 0x78(8),.Lnewpsw # set up IO interrupt psw - lpsw .Lwaitpsw -.Lioint: - c %r1,0xb8 # compare subchannel number - bne .Lwait4irq - tsch 0(%r5) - - slr %r0,%r0 - ic %r0,8(%r5) # get device status - chi %r0,8 # channel end ? - be .Lcont - chi %r0,12 # channel end + device end ? - be .Lcont - - l %r0,4(%r5) - s %r0,8(%r3) # r0/8 = number of ccws executed - mhi %r0,10 # *10 = number of bytes in ccws - lh %r3,10(%r5) # get residual count - sr %r0,%r3 # #ccws*80-residual=#bytes read - ar %r2,%r0 - - br %r14 # r2 contains the total size - -.Lcont: - ahi %r2,0x640 # add 0x640 to total size - la %r6,.Lccws - la %r7,20 -.Lincr: - l %r0,4(%r6) # update CCW data addresses - ahi %r0,0x640 - st %r0,4(%r6) - ahi %r6,8 - bct 7,.Lincr - - b .Lldlp -.Llderr: - lpsw .Lcrash - - .align 8 -.Lorb: .long 0x00000000,0x0080ff00,.Lccws -.Lirb: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 -.Lcr6: .long 0xff000000 -.Lloadp:.long 0,0 - .align 8 -.Lcrash:.long 0x000a0000,0x00000000 -.Lnewpsw: - .long 0x00080000,0x80000000+.Lioint -.Lwaitpsw: - .long 0x020a0000,0x80000000+.Lioint - - .align 8 -.Lccws: .rept 19 - .long 0x02600050,0x00000000 - .endr - .long 0x02200050,0x00000000 -#endif /* CONFIG_IPL_VM */ - -iplstart: - lh %r1,0xb8 # test if subchannel number - bct %r1,.Lnoload # is valid - l %r1,0xb8 # load ipl subchannel number - la %r2,IPL_BS # load start address - bas %r14,.Lloader # load rest of ipl image - larl %r12,_pstart # pointer to parameter area - st %r1,IPL_DEVICE+4-PARMAREA(%r12) # store ipl device number - -# -# load parameter file from ipl device # -.Lagain1: - l %r2,INITRD_START+4-PARMAREA(%r12)# use ramdisk location as temp - bas %r14,.Lloader # load parameter file - ltr %r2,%r2 # got anything ? - bz .Lnopf - chi %r2,895 - bnh .Lnotrunc - la %r2,895 -.Lnotrunc: - l %r4,INITRD_START+4-PARMAREA(%r12) - clc 0(3,%r4),.L_hdr # if it is HDRx - bz .Lagain1 # skip dataset header - clc 0(3,%r4),.L_eof # if it is EOFx - bz .Lagain1 # skip dateset trailer - la %r5,0(%r4,%r2) - lr %r3,%r2 -.Lidebc: - tm 0(%r5),0x80 # high order bit set ? - bo .Ldocv # yes -> convert from EBCDIC - ahi %r5,-1 - bct %r3,.Lidebc - b .Lnocv -.Ldocv: - l %r3,.Lcvtab - tr 0(256,%r4),0(%r3) # convert parameters to ascii - tr 256(256,%r4),0(%r3) - tr 512(256,%r4),0(%r3) - tr 768(122,%r4),0(%r3) -.Lnocv: la %r3,COMMAND_LINE-PARMAREA(%r12) # load adr. of command line - mvc 0(256,%r3),0(%r4) - mvc 256(256,%r3),256(%r4) - mvc 512(256,%r3),512(%r4) - mvc 768(122,%r3),768(%r4) - slr %r0,%r0 - b .Lcntlp -.Ldelspc: - ic %r0,0(%r2,%r3) - chi %r0,0x20 # is it a space ? - be .Lcntlp - ahi %r2,1 - b .Leolp -.Lcntlp: - brct %r2,.Ldelspc -.Leolp: - slr %r0,%r0 - stc %r0,0(%r2,%r3) # terminate buffer -.Lnopf: - -# -# load ramdisk from ipl device -# -.Lagain2: - l %r2,INITRD_START+4-PARMAREA(%r12)# load adr. of ramdisk - bas %r14,.Lloader # load ramdisk - st %r2,INITRD_SIZE+4-PARMAREA(%r12) # store size of ramdisk - ltr %r2,%r2 - bnz .Lrdcont - st %r2,INITRD_START+4-PARMAREA(%r12)# no ramdisk found, null it -.Lrdcont: - l %r2,INITRD_START+4-PARMAREA(%r12) - clc 0(3,%r2),.L_hdr # skip HDRx and EOFx - bz .Lagain2 - clc 0(3,%r2),.L_eof - bz .Lagain2 - -#ifdef CONFIG_IPL_VM -# -# reset files in VM reader -# - stidp __LC_CPUID # store cpuid - tm __LC_CPUID,0xff # running VM ? - bno .Lnoreset - la %r2,.Lreset - lhi %r3,26 - diag %r2,%r3,8 - la %r5,.Lirb - stsch 0(%r5) # check if irq is pending - tm 30(%r5),0x0f # by verifying if any of the - bnz .Lwaitforirq # activity or status control - tm 31(%r5),0xff # bits is set in the schib - bz .Lnoreset -.Lwaitforirq: - mvc 0x78(8),.Lrdrnewpsw # set up IO interrupt psw -.Lwaitrdrirq: - lpsw .Lrdrwaitpsw -.Lrdrint: - c %r1,0xb8 # compare subchannel number - bne .Lwaitrdrirq - la %r5,.Lirb - tsch 0(%r5) -.Lnoreset: - b .Lnoload - - .align 8 -.Lrdrnewpsw: - .long 0x00080000,0x80000000+.Lrdrint -.Lrdrwaitpsw: - .long 0x020a0000,0x80000000+.Lrdrint -#endif - -# -# everything loaded, go for it -# -.Lnoload: - l %r1,.Lstartup - br %r1 - -.Lstartup: .long startup -.Lcvtab:.long _ebcasc # ebcdic to ascii table -.Lreset:.byte 0xc3,0xc8,0xc1,0xd5,0xc7,0xc5,0x40,0xd9,0xc4,0xd9,0x40 - .byte 0xc1,0xd3,0xd3,0x40,0xd2,0xc5,0xc5,0xd7,0x40,0xd5,0xd6 - .byte 0xc8,0xd6,0xd3,0xc4 # "change rdr all keep nohold" -.L_eof: .long 0xc5d6c600 /* C'EOF' */ -.L_hdr: .long 0xc8c4d900 /* C'HDR' */ -#endif /* CONFIG_IPL */ - -# -# SALIPL loader support. Based on a patch by Rob van der Heij. -# This entry point is called directly from the SALIPL loader and -# doesn't need a builtin ipl record. -# - .org 0x800 - .globl start -start: - stm %r0,%r15,0x07b0 # store registers - basr %r12,%r0 -.base: - l %r11,.parm - l %r8,.cmd # pointer to command buffer - - ltr %r9,%r9 # do we have SALIPL parameters? - bp .sk8x8 - - mvc 0(64,%r8),0x00b0 # copy saved registers - xc 64(240-64,%r8),0(%r8) # remainder of buffer - tr 0(64,%r8),.lowcase - b .gotr -.sk8x8: - mvc 0(240,%r8),0(%r9) # copy iplparms into buffer -.gotr: - l %r10,.tbl # EBCDIC to ASCII table - tr 0(240,%r8),0(%r10) - stidp __LC_CPUID # Are we running on VM maybe - cli __LC_CPUID,0xff - bnz .test - .long 0x83300060 # diag 3,0,x'0060' - storage size - b .done -.test: - mvc 0x68(8),.pgmnw # set up pgm check handler - l %r2,.fourmeg - lr %r3,%r2 - bctr %r3,%r0 # 4M-1 -.loop: iske %r0,%r3 - ar %r3,%r2 -.pgmx: - sr %r3,%r2 - la %r3,1(%r3) -.done: - l %r1,.memsize - st %r3,4(%r1) - slr %r0,%r0 - st %r0,INITRD_SIZE+4-PARMAREA(%r11) - st %r0,INITRD_START+4-PARMAREA(%r11) - j startup # continue with startup -.tbl: .long _ebcasc # translate table -.cmd: .long COMMAND_LINE # address of command line buffer -.parm: .long PARMAREA -.fourmeg: .long 0x00400000 # 4M -.pgmnw: .long 0x00080000,.pgmx -.memsize: .long memory_size -.lowcase: - .byte 0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07 - .byte 0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f - .byte 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17 - .byte 0x18,0x19,0x1a,0x1b,0x1c,0x1d,0x1e,0x1f - .byte 0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27 - .byte 0x28,0x29,0x2a,0x2b,0x2c,0x2d,0x2e,0x2f - .byte 0x30,0x31,0x32,0x33,0x34,0x35,0x36,0x37 - .byte 0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f - .byte 0x40,0x41,0x42,0x43,0x44,0x45,0x46,0x47 - .byte 0x48,0x49,0x4a,0x4b,0x4c,0x4d,0x4e,0x4f - .byte 0x50,0x51,0x52,0x53,0x54,0x55,0x56,0x57 - .byte 0x58,0x59,0x5a,0x5b,0x5c,0x5d,0x5e,0x5f - .byte 0x60,0x61,0x62,0x63,0x64,0x65,0x66,0x67 - .byte 0x68,0x69,0x6a,0x6b,0x6c,0x6d,0x6e,0x6f - .byte 0x70,0x71,0x72,0x73,0x74,0x75,0x76,0x77 - .byte 0x78,0x79,0x7a,0x7b,0x7c,0x7d,0x7e,0x7f - - .byte 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87 - .byte 0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f - .byte 0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97 - .byte 0x98,0x99,0x9a,0x9b,0x9c,0x9d,0x9e,0x9f - .byte 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7 - .byte 0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf - .byte 0xb0,0xb1,0xb2,0xb3,0xb4,0xb5,0xb6,0xb7 - .byte 0xb8,0xb9,0xba,0xbb,0xbc,0xbd,0xbe,0xbf - .byte 0xc0,0x81,0x82,0x83,0x84,0x85,0x86,0x87 # .abcdefg - .byte 0x88,0x89,0xca,0xcb,0xcc,0xcd,0xce,0xcf # hi - .byte 0xd0,0x91,0x92,0x93,0x94,0x95,0x96,0x97 # .jklmnop - .byte 0x98,0x99,0xda,0xdb,0xdc,0xdd,0xde,0xdf # qr - .byte 0xe0,0xe1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7 # ..stuvwx - .byte 0xa8,0xa9,0xea,0xeb,0xec,0xed,0xee,0xef # yz - .byte 0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7 - .byte 0xf8,0xf9,0xfa,0xfb,0xfc,0xfd,0xfe,0xff - -# -# startup-code at 0x10000, running in real mode +# startup-code at 0x10000, running in absolute addressing mode # this is called either by the ipl loader or directly by PSW restart # or linload or SALIPL # @@ -750,62 +285,7 @@ _pstart: .global _pend _pend: -.Lget_ipl_device: - basr %r12,0 -.LPG2: l %r1,0xb8 # get sid - sll %r1,15 # test if subchannel is enabled - srl %r1,31 - ltr %r1,%r1 - bz 0(%r14) # subchannel disabled - l %r1,0xb8 - la %r5,.Lipl_schib-.LPG2(%r12) - stsch 0(%r5) # get schib of subchannel - bnz 0(%r14) # schib not available - tm 5(%r5),0x01 # devno valid? - bno 0(%r14) - la %r6,ipl_parameter_flags-.LPG2(%r12) - oi 3(%r6),0x01 # set flag - la %r2,ipl_devno-.LPG2(%r12) - mvc 0(2,%r2),6(%r5) # store devno - tm 4(%r5),0x80 # qdio capable device? - bno 0(%r14) - oi 3(%r6),0x02 # set flag - - # copy ipl parameters - - lhi %r0,4096 - l %r2,20(%r0) # get address of parameter list - lhi %r3,IPL_PARMBLOCK_ORIGIN - st %r3,20(%r0) - lhi %r4,1 - cr %r2,%r3 # start parameters < destination ? - jl 0f - lhi %r1,1 # copy direction is upwards - j 1f -0: lhi %r1,-1 # copy direction is downwards - ar %r2,%r0 - ar %r3,%r0 - ar %r2,%r1 - ar %r3,%r1 -1: mvc 0(1,%r3),0(%r2) # finally copy ipl parameters - ar %r3,%r1 - ar %r2,%r1 - sr %r0,%r4 - jne 1b - b 0(%r14) - - .align 4 -.Lipl_schib: - .rept 13 - .long 0 - .endr - - .globl ipl_parameter_flags -ipl_parameter_flags: - .long 0 - .globl ipl_devno -ipl_devno: - .word 0 + GET_IPL_DEVICE #ifdef CONFIG_SHARED_KERNEL .org 0x100000 -- cgit v1.2.3 From cd6b0762a04978baf48412456a687842de97e381 Mon Sep 17 00:00:00 2001 From: Prasanna S Panchamukhi Date: Mon, 7 Nov 2005 00:59:14 -0800 Subject: [PATCH] Move Kprobes and Oprofile to "Instrumentation Support" menu Andrew Morton suggested to move kprobes from kernel hacking menu, since kernel hacking menu is in-appropriate for the Kprobes. This patch moves Kprobes and Oprofile under instrumentation menu. (akpm: it's not a natural fit, but things like djprobes and the s390 guys' statistics library need a home) Signed-of-by: Prasanna S Panchamukhi Cc: Philippe Elie Cc: John Levon Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/Kconfig | 13 +++++++++++++ arch/i386/Kconfig.debug | 10 ---------- arch/i386/oprofile/Kconfig | 6 ------ arch/ia64/Kconfig | 13 +++++++++++++ arch/ia64/Kconfig.debug | 11 ----------- arch/ia64/oprofile/Kconfig | 6 ------ arch/powerpc/Kconfig | 13 +++++++++++++ arch/powerpc/Kconfig.debug | 10 ---------- arch/powerpc/oprofile/Kconfig | 6 ------ arch/sparc64/Kconfig | 13 +++++++++++++ arch/sparc64/Kconfig.debug | 10 ---------- arch/sparc64/oprofile/Kconfig | 6 ------ arch/x86_64/Kconfig | 13 +++++++++++++ arch/x86_64/Kconfig.debug | 10 ---------- arch/x86_64/oprofile/Kconfig | 6 ------ 15 files changed, 65 insertions(+), 81 deletions(-) (limited to 'arch') diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index bac0da731ee..dbf90ad6eac 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -997,8 +997,21 @@ source "drivers/Kconfig" source "fs/Kconfig" +menu "Instrumentation Support" + depends on EXPERIMENTAL + source "arch/i386/oprofile/Kconfig" +config KPROBES + bool "Kprobes (EXPERIMENTAL)" + help + Kprobes allows you to trap at almost any kernel address and + execute a callback function. register_kprobe() establishes + a probepoint and specifies the callback. Kprobes is useful + for kernel debugging, non-intrusive instrumentation and testing. + If in doubt, say "N". +endmenu + source "arch/i386/Kconfig.debug" source "security/Kconfig" diff --git a/arch/i386/Kconfig.debug b/arch/i386/Kconfig.debug index 5228c40a6fb..c48b424dd64 100644 --- a/arch/i386/Kconfig.debug +++ b/arch/i386/Kconfig.debug @@ -22,16 +22,6 @@ config DEBUG_STACKOVERFLOW This option will cause messages to be printed if free stack space drops below a certain limit. -config KPROBES - bool "Kprobes" - depends on DEBUG_KERNEL - help - Kprobes allows you to trap at almost any kernel address and - execute a callback function. register_kprobe() establishes - a probepoint and specifies the callback. Kprobes is useful - for kernel debugging, non-intrusive instrumentation and testing. - If in doubt, say "N". - config DEBUG_STACK_USAGE bool "Stack utilization instrumentation" depends on DEBUG_KERNEL diff --git a/arch/i386/oprofile/Kconfig b/arch/i386/oprofile/Kconfig index 5ade19801b9..d8a84088471 100644 --- a/arch/i386/oprofile/Kconfig +++ b/arch/i386/oprofile/Kconfig @@ -1,7 +1,3 @@ - -menu "Profiling support" - depends on EXPERIMENTAL - config PROFILING bool "Profiling support (EXPERIMENTAL)" help @@ -19,5 +15,3 @@ config OPROFILE If unsure, say N. -endmenu - diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 3b4248cff9a..9f2093c1f44 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -426,8 +426,21 @@ config GENERIC_PENDING_IRQ source "arch/ia64/hp/sim/Kconfig" +menu "Instrumentation Support" + depends on EXPERIMENTAL + source "arch/ia64/oprofile/Kconfig" +config KPROBES + bool "Kprobes (EXPERIMENTAL)" + help + Kprobes allows you to trap at almost any kernel address and + execute a callback function. register_kprobe() establishes + a probepoint and specifies the callback. Kprobes is useful + for kernel debugging, non-intrusive instrumentation and testing. + If in doubt, say "N". +endmenu + source "arch/ia64/Kconfig.debug" source "security/Kconfig" diff --git a/arch/ia64/Kconfig.debug b/arch/ia64/Kconfig.debug index fda67ac993d..de9d507ba0f 100644 --- a/arch/ia64/Kconfig.debug +++ b/arch/ia64/Kconfig.debug @@ -2,17 +2,6 @@ menu "Kernel hacking" source "lib/Kconfig.debug" -config KPROBES - bool "Kprobes" - depends on DEBUG_KERNEL - help - Kprobes allows you to trap at almost any kernel address and - execute a callback function. register_kprobe() establishes - a probepoint and specifies the callback. Kprobes is useful - for kernel debugging, non-intrusive instrumentation and testing. - If in doubt, say "N". - - choice prompt "Physical memory granularity" default IA64_GRANULE_64MB diff --git a/arch/ia64/oprofile/Kconfig b/arch/ia64/oprofile/Kconfig index 56e6f614b04..97271ab484d 100644 --- a/arch/ia64/oprofile/Kconfig +++ b/arch/ia64/oprofile/Kconfig @@ -1,7 +1,3 @@ - -menu "Profiling support" - depends on EXPERIMENTAL - config PROFILING bool "Profiling support (EXPERIMENTAL)" help @@ -22,5 +18,3 @@ config OPROFILE If unsure, say N. -endmenu - diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 55ce4957052..6ffae2d2b3f 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -917,8 +917,21 @@ source "arch/powerpc/platforms/iseries/Kconfig" source "lib/Kconfig" +menu "Instrumentation Support" + depends on EXPERIMENTAL + source "arch/powerpc/oprofile/Kconfig" +config KPROBES + bool "Kprobes (EXPERIMENTAL)" + help + Kprobes allows you to trap at almost any kernel address and + execute a callback function. register_kprobe() establishes + a probepoint and specifies the callback. Kprobes is useful + for kernel debugging, non-intrusive instrumentation and testing. + If in doubt, say "N". +endmenu + source "arch/powerpc/Kconfig.debug" source "security/Kconfig" diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index 0baf64ec80d..30a30bf559e 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -9,16 +9,6 @@ config DEBUG_STACKOVERFLOW This option will cause messages to be printed if free stack space drops below a certain limit. -config KPROBES - bool "Kprobes" - depends on DEBUG_KERNEL && PPC64 - help - Kprobes allows you to trap at almost any kernel address and - execute a callback function. register_kprobe() establishes - a probepoint and specifies the callback. Kprobes is useful - for kernel debugging, non-intrusive instrumentation and testing. - If in doubt, say "N". - config DEBUG_STACK_USAGE bool "Stack utilization instrumentation" depends on DEBUG_KERNEL && PPC64 diff --git a/arch/powerpc/oprofile/Kconfig b/arch/powerpc/oprofile/Kconfig index 19d37730b66..eb2dece76a5 100644 --- a/arch/powerpc/oprofile/Kconfig +++ b/arch/powerpc/oprofile/Kconfig @@ -1,7 +1,3 @@ - -menu "Profiling support" - depends on EXPERIMENTAL - config PROFILING bool "Profiling support (EXPERIMENTAL)" help @@ -19,5 +15,3 @@ config OPROFILE If unsure, say N. -endmenu - diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig index 1e9d8638a28..3fded69b192 100644 --- a/arch/sparc64/Kconfig +++ b/arch/sparc64/Kconfig @@ -377,8 +377,21 @@ source "drivers/fc4/Kconfig" source "fs/Kconfig" +menu "Instrumentation Support" + depends on EXPERIMENTAL + source "arch/sparc64/oprofile/Kconfig" +config KPROBES + bool "Kprobes (EXPERIMENTAL)" + help + Kprobes allows you to trap at almost any kernel address and + execute a callback function. register_kprobe() establishes + a probepoint and specifies the callback. Kprobes is useful + for kernel debugging, non-intrusive instrumentation and testing. + If in doubt, say "N". +endmenu + source "arch/sparc64/Kconfig.debug" source "security/Kconfig" diff --git a/arch/sparc64/Kconfig.debug b/arch/sparc64/Kconfig.debug index fa06ea04837..3e31be494e5 100644 --- a/arch/sparc64/Kconfig.debug +++ b/arch/sparc64/Kconfig.debug @@ -11,16 +11,6 @@ config DEBUG_STACK_USAGE This option will slow down process creation somewhat. -config KPROBES - bool "Kprobes" - depends on DEBUG_KERNEL - help - Kprobes allows you to trap at almost any kernel address and - execute a callback function. register_kprobe() establishes - a probepoint and specifies the callback. Kprobes is useful - for kernel debugging, non-intrusive instrumentation and testing. - If in doubt, say "N". - config DEBUG_DCFLUSH bool "D-cache flush debugging" depends on DEBUG_KERNEL diff --git a/arch/sparc64/oprofile/Kconfig b/arch/sparc64/oprofile/Kconfig index 5ade19801b9..d8a84088471 100644 --- a/arch/sparc64/oprofile/Kconfig +++ b/arch/sparc64/oprofile/Kconfig @@ -1,7 +1,3 @@ - -menu "Profiling support" - depends on EXPERIMENTAL - config PROFILING bool "Profiling support (EXPERIMENTAL)" help @@ -19,5 +15,3 @@ config OPROFILE If unsure, say N. -endmenu - diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index 21afa69a086..4cce2f6f170 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -532,8 +532,21 @@ source "drivers/firmware/Kconfig" source fs/Kconfig +menu "Instrumentation Support" + depends on EXPERIMENTAL + source "arch/x86_64/oprofile/Kconfig" +config KPROBES + bool "Kprobes (EXPERIMENTAL)" + help + Kprobes allows you to trap at almost any kernel address and + execute a callback function. register_kprobe() establishes + a probepoint and specifies the callback. Kprobes is useful + for kernel debugging, non-intrusive instrumentation and testing. + If in doubt, say "N". +endmenu + source "arch/x86_64/Kconfig.debug" source "security/Kconfig" diff --git a/arch/x86_64/Kconfig.debug b/arch/x86_64/Kconfig.debug index 9cf1410d2f5..d584ecc27ea 100644 --- a/arch/x86_64/Kconfig.debug +++ b/arch/x86_64/Kconfig.debug @@ -33,16 +33,6 @@ config IOMMU_DEBUG options. See Documentation/x86_64/boot-options.txt for more details. -config KPROBES - bool "Kprobes" - depends on DEBUG_KERNEL - help - Kprobes allows you to trap at almost any kernel address and - execute a callback function. register_kprobe() establishes - a probepoint and specifies the callback. Kprobes is useful - for kernel debugging, non-intrusive instrumentation and testing. - If in doubt, say "N". - config IOMMU_LEAK bool "IOMMU leak tracing" depends on DEBUG_KERNEL diff --git a/arch/x86_64/oprofile/Kconfig b/arch/x86_64/oprofile/Kconfig index 5ade19801b9..d8a84088471 100644 --- a/arch/x86_64/oprofile/Kconfig +++ b/arch/x86_64/oprofile/Kconfig @@ -1,7 +1,3 @@ - -menu "Profiling support" - depends on EXPERIMENTAL - config PROFILING bool "Profiling support (EXPERIMENTAL)" help @@ -19,5 +15,3 @@ config OPROFILE If unsure, say N. -endmenu - -- cgit v1.2.3 From 8c65b4a60450590e79a28e9717ceffa9e4debb3f Mon Sep 17 00:00:00 2001 From: Tim Schmielau Date: Mon, 7 Nov 2005 00:59:43 -0800 Subject: [PATCH] fix remaining missing includes Fix more include file problems that surfaced since I submitted the previous fix-missing-includes.patch. This should now allow not to include sched.h from module.h, which is done by a followup patch. Signed-off-by: Tim Schmielau Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/arm/mach-aaec2000/clock.c | 1 + arch/arm/mach-epxa10db/mm.c | 1 + arch/arm/mach-pxa/corgi_lcd.c | 1 + arch/ppc/syslib/ppc_sys.c | 1 + 4 files changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-aaec2000/clock.c b/arch/arm/mach-aaec2000/clock.c index 99e019169dd..0340ddc4824 100644 --- a/arch/arm/mach-aaec2000/clock.c +++ b/arch/arm/mach-aaec2000/clock.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include diff --git a/arch/arm/mach-epxa10db/mm.c b/arch/arm/mach-epxa10db/mm.c index e8832d0910e..cfd0d2182d4 100644 --- a/arch/arm/mach-epxa10db/mm.c +++ b/arch/arm/mach-epxa10db/mm.c @@ -25,6 +25,7 @@ #include #include #include +#include #include diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c index 54162ba9541..698eb06545c 100644 --- a/arch/arm/mach-pxa/corgi_lcd.c +++ b/arch/arm/mach-pxa/corgi_lcd.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/ppc/syslib/ppc_sys.c b/arch/ppc/syslib/ppc_sys.c index 62ee86e8071..603f0119081 100644 --- a/arch/ppc/syslib/ppc_sys.c +++ b/arch/ppc/syslib/ppc_sys.c @@ -14,6 +14,7 @@ * option) any later version. */ +#include #include int (*ppc_sys_device_fixup) (struct platform_device * pdev); -- cgit v1.2.3 From 481bed454247538e9f57d4ea37b153ccba24ba7b Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 7 Nov 2005 00:59:47 -0800 Subject: [PATCH] consolidate sys_ptrace() The sys_ptrace boilerplate code (everything outside the big switch statement for the arch-specific requests) is shared by most architectures. This patch moves it to kernel/ptrace.c and leaves the arch-specific code as arch_ptrace. Some architectures have a too different ptrace so we have to exclude them. They continue to keep their implementations. For sh64 I had to add a sh64_ptrace wrapper because it does some initialization on the first call. For um I removed an ifdefed SUBARCH_PTRACE_SPECIAL block, but SUBARCH_PTRACE_SPECIAL isn't defined anywhere in the tree. Signed-off-by: Christoph Hellwig Acked-by: Paul Mackerras Acked-by: Ralf Baechle Acked-By: David Howells Acked-by: Russell King Acked-by: Paul Mundt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/arm/kernel/ptrace.c | 49 +--------------------- arch/arm26/kernel/ptrace.c | 49 +--------------------- arch/cris/arch-v10/kernel/ptrace.c | 51 +---------------------- arch/cris/arch-v32/kernel/ptrace.c | 51 +---------------------- arch/frv/kernel/ptrace.c | 43 +------------------- arch/h8300/kernel/ptrace.c | 39 +----------------- arch/i386/kernel/ptrace.c | 44 +------------------- arch/m68k/kernel/ptrace.c | 47 ++------------------- arch/m68knommu/kernel/ptrace.c | 39 +----------------- arch/mips/kernel/ptrace.c | 55 +++---------------------- arch/parisc/kernel/ptrace.c | 50 ++--------------------- arch/powerpc/kernel/ptrace.c | 43 +------------------- arch/sh/kernel/ptrace.c | 44 +------------------- arch/sh64/kernel/ptrace.c | 83 +++++++++++++------------------------- arch/sh64/kernel/syscalls.S | 2 +- arch/um/kernel/ptrace.c | 50 +---------------------- arch/v850/kernel/ptrace.c | 43 +------------------- arch/x86_64/kernel/ptrace.c | 43 +------------------- arch/xtensa/kernel/ptrace.c | 55 +------------------------ 19 files changed, 62 insertions(+), 818 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 9bd8609a292..9a340e790da 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -648,7 +648,7 @@ static int ptrace_setwmmxregs(struct task_struct *tsk, void __user *ufp) #endif -static int do_ptrace(int request, struct task_struct *child, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { unsigned long tmp; int ret; @@ -782,53 +782,6 @@ static int do_ptrace(int request, struct task_struct *child, long addr, long dat return ret; } -asmlinkage long sys_ptrace(long request, long pid, long addr, long data) -{ - struct task_struct *child; - int ret; - - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret == 0) - ret = do_ptrace(request, child, addr, data); - -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); - return ret; -} - asmlinkage void syscall_trace(int why, struct pt_regs *regs) { unsigned long ip; diff --git a/arch/arm26/kernel/ptrace.c b/arch/arm26/kernel/ptrace.c index cf7e977d18c..4e6b7356a72 100644 --- a/arch/arm26/kernel/ptrace.c +++ b/arch/arm26/kernel/ptrace.c @@ -546,7 +546,7 @@ static int ptrace_setfpregs(struct task_struct *tsk, void *ufp) sizeof(struct user_fp)) ? -EFAULT : 0; } -static int do_ptrace(int request, struct task_struct *child, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { unsigned long tmp; int ret; @@ -665,53 +665,6 @@ static int do_ptrace(int request, struct task_struct *child, long addr, long dat return ret; } -asmlinkage long sys_ptrace(long request, long pid, long addr, long data) -{ - struct task_struct *child; - int ret; - - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret == 0) - ret = do_ptrace(request, child, addr, data); - -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); - return ret; -} - asmlinkage void syscall_trace(int why, struct pt_regs *regs) { unsigned long ip; diff --git a/arch/cris/arch-v10/kernel/ptrace.c b/arch/cris/arch-v10/kernel/ptrace.c index 130dd214e41..6cbd34a27b9 100644 --- a/arch/cris/arch-v10/kernel/ptrace.c +++ b/arch/cris/arch-v10/kernel/ptrace.c @@ -76,55 +76,11 @@ ptrace_disable(struct task_struct *child) * (in user space) where the result of the ptrace call is written (instead of * being returned). */ -asmlinkage int -sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; int ret; unsigned long __user *datap = (unsigned long __user *)data; - lock_kernel(); - ret = -EPERM; - - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - - if (child) - get_task_struct(child); - - read_unlock(&tasklist_lock); - - if (!child) - goto out; - - ret = -EPERM; - - if (pid == 1) /* Leave the init process alone! */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* Read word at location address. */ case PTRACE_PEEKTEXT: @@ -289,10 +245,7 @@ sys_ptrace(long request, long pid, long addr, long data) ret = ptrace_request(child, request, addr, data); break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); + return ret; } diff --git a/arch/cris/arch-v32/kernel/ptrace.c b/arch/cris/arch-v32/kernel/ptrace.c index 208489da2a8..5528b83a622 100644 --- a/arch/cris/arch-v32/kernel/ptrace.c +++ b/arch/cris/arch-v32/kernel/ptrace.c @@ -99,55 +99,11 @@ ptrace_disable(struct task_struct *child) } -asmlinkage int -sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; int ret; unsigned long __user *datap = (unsigned long __user *)data; - lock_kernel(); - ret = -EPERM; - - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - - if (child) - get_task_struct(child); - - read_unlock(&tasklist_lock); - - if (!child) - goto out; - - ret = -EPERM; - - if (pid == 1) /* Leave the init process alone! */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* Read word at location address. */ case PTRACE_PEEKTEXT: @@ -347,10 +303,7 @@ sys_ptrace(long request, long pid, long addr, long data) ret = ptrace_request(child, request, addr, data); break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); + return ret; } diff --git a/arch/frv/kernel/ptrace.c b/arch/frv/kernel/ptrace.c index cb335a14a31..f953484e7d5 100644 --- a/arch/frv/kernel/ptrace.c +++ b/arch/frv/kernel/ptrace.c @@ -106,48 +106,11 @@ void ptrace_enable(struct task_struct *child) child->thread.frame0->__status |= REG__STATUS_STEP; } -asmlinkage long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; unsigned long tmp; int ret; - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -351,10 +314,6 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) ret = -EIO; break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); return ret; } diff --git a/arch/h8300/kernel/ptrace.c b/arch/h8300/kernel/ptrace.c index a569fe4aa28..0ff6f79b0fe 100644 --- a/arch/h8300/kernel/ptrace.c +++ b/arch/h8300/kernel/ptrace.c @@ -57,43 +57,10 @@ void ptrace_disable(struct task_struct *child) h8300_disable_trace(child); } -asmlinkage long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; int ret; - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { case PTRACE_PEEKTEXT: /* read word at location addr. */ case PTRACE_PEEKDATA: { @@ -251,10 +218,6 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) ret = -EIO; break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); return ret; } diff --git a/arch/i386/kernel/ptrace.c b/arch/i386/kernel/ptrace.c index efd11f09c99..5ffbb4b7ad0 100644 --- a/arch/i386/kernel/ptrace.c +++ b/arch/i386/kernel/ptrace.c @@ -354,49 +354,12 @@ ptrace_set_thread_area(struct task_struct *child, return 0; } -asmlinkage long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; struct user * dummy = NULL; int i, ret; unsigned long __user *datap = (unsigned long __user *)data; - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -663,10 +626,7 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) ret = ptrace_request(child, request, addr, data); break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); + out_tsk: return ret; } diff --git a/arch/m68k/kernel/ptrace.c b/arch/m68k/kernel/ptrace.c index f7f1d2e5b90..7e54422685c 100644 --- a/arch/m68k/kernel/ptrace.c +++ b/arch/m68k/kernel/ptrace.c @@ -121,48 +121,11 @@ void ptrace_disable(struct task_struct *child) child->thread.work.syscall_trace = 0; } -asmlinkage long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; unsigned long tmp; int i, ret = 0; - lock_kernel(); - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) { - ret = -EPERM; - goto out; - } - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - goto out; - } - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (unlikely(!child)) { - ret = -ESRCH; - goto out; - } - - /* you may not mess with init */ - if (unlikely(pid == 1)) { - ret = -EPERM; - goto out_tsk; - } - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -317,14 +280,10 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) ret = ptrace_request(child, request, addr, data); break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); + return ret; out_eio: - ret = -EIO; - goto out_tsk; + return -EIO; } asmlinkage void syscall_trace(void) diff --git a/arch/m68knommu/kernel/ptrace.c b/arch/m68knommu/kernel/ptrace.c index 621d7b91ccf..262ab8c72e5 100644 --- a/arch/m68knommu/kernel/ptrace.c +++ b/arch/m68knommu/kernel/ptrace.c @@ -101,43 +101,10 @@ void ptrace_disable(struct task_struct *child) put_reg(child, PT_SR, tmp); } -asmlinkage long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(truct task_struct *child, long request, long addr, long data) { - struct task_struct *child; int ret; - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -357,10 +324,6 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) ret = -EIO; break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); return ret; } diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c index f1b0f3e1f95..510da5fda56 100644 --- a/arch/mips/kernel/ptrace.c +++ b/arch/mips/kernel/ptrace.c @@ -174,51 +174,10 @@ int ptrace_setfpregs (struct task_struct *child, __u32 __user *data) return 0; } -asmlinkage long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; int ret; -#if 0 - printk("ptrace(r=%d,pid=%d,addr=%08lx,data=%08lx)\n", - (int) request, (int) pid, (unsigned long) addr, - (unsigned long) data); -#endif - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - if ((ret = security_ptrace(current->parent, current))) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -319,7 +278,7 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) if (!cpu_has_dsp) { tmp = 0; ret = -EIO; - goto out_tsk; + goto out; } if (child->thread.dsp.used_dsp) { dregs = __get_dsp_regs(child); @@ -333,14 +292,14 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) if (!cpu_has_dsp) { tmp = 0; ret = -EIO; - goto out_tsk; + goto out; } tmp = child->thread.dsp.dspcontrol; break; default: tmp = 0; ret = -EIO; - goto out_tsk; + goto out; } ret = put_user(tmp, (unsigned long __user *) data); break; @@ -495,11 +454,7 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) ret = ptrace_request(child, request, addr, data); break; } - -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); + out: return ret; } diff --git a/arch/parisc/kernel/ptrace.c b/arch/parisc/kernel/ptrace.c index 18130c3748f..b6fe202a620 100644 --- a/arch/parisc/kernel/ptrace.c +++ b/arch/parisc/kernel/ptrace.c @@ -78,52 +78,13 @@ void ptrace_disable(struct task_struct *child) pa_psw(child)->l = 0; } -long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; long ret; #ifdef DEBUG_PTRACE long oaddr=addr, odata=data; #endif - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - ret = -EPERM; - if (pid == 1) /* no messing around with init! */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { case PTRACE_PEEKTEXT: /* read word at location addr. */ case PTRACE_PEEKDATA: { @@ -383,11 +344,11 @@ long sys_ptrace(long request, long pid, long addr, long data) case PTRACE_GETEVENTMSG: ret = put_user(child->ptrace_message, (unsigned int __user *) data); - goto out_tsk; + goto out; default: ret = ptrace_request(child, request, addr, data); - goto out_tsk; + goto out; } out_wake_notrap: @@ -396,10 +357,7 @@ out_wake: wake_up_process(child); ret = 0; out_tsk: - put_task_struct(child); -out: - unlock_kernel(); - DBG("sys_ptrace(%ld, %d, %lx, %lx) returning %ld\n", + DBG("arch_ptrace(%ld, %d, %lx, %lx) returning %ld\n", request, pid, oaddr, odata, ret); return ret; } diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 568ea335d61..3d2abd95c7a 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -248,46 +248,10 @@ void ptrace_disable(struct task_struct *child) clear_single_step(child); } -long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; int ret = -EPERM; - lock_kernel(); - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -540,10 +504,7 @@ long sys_ptrace(long request, long pid, long addr, long data) ret = ptrace_request(child, request, addr, data); break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); + return ret; } diff --git a/arch/sh/kernel/ptrace.c b/arch/sh/kernel/ptrace.c index 1fbe5a428e3..1a8be06519e 100644 --- a/arch/sh/kernel/ptrace.c +++ b/arch/sh/kernel/ptrace.c @@ -80,48 +80,11 @@ void ptrace_disable(struct task_struct *child) /* nothing to do.. */ } -asmlinkage long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; struct user * dummy = NULL; int ret; - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -289,10 +252,7 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) ret = ptrace_request(child, request, addr, data); break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); + return ret; } diff --git a/arch/sh64/kernel/ptrace.c b/arch/sh64/kernel/ptrace.c index 71f2eec00b9..cd22e947131 100644 --- a/arch/sh64/kernel/ptrace.c +++ b/arch/sh64/kernel/ptrace.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include @@ -121,61 +122,11 @@ put_fpu_long(struct task_struct *task, unsigned long addr, unsigned long data) return 0; } -asmlinkage long sys_ptrace(long request, long pid, long addr, long data) + +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; - extern void poke_real_address_q(unsigned long long addr, unsigned long long data); -#define WPC_DBRMODE 0x0d104008 - static int first_call = 1; int ret; - lock_kernel(); - - if (first_call) { - /* Set WPC.DBRMODE to 0. This makes all debug events get - * delivered through RESVEC, i.e. into the handlers in entry.S. - * (If the kernel was downloaded using a remote gdb, WPC.DBRMODE - * would normally be left set to 1, which makes debug events get - * delivered through DBRVEC, i.e. into the remote gdb's - * handlers. This prevents ptrace getting them, and confuses - * the remote gdb.) */ - printk("DBRMODE set to 0 to permit native debugging\n"); - poke_real_address_q(WPC_DBRMODE, 0); - first_call = 0; - } - - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -313,13 +264,33 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) ret = ptrace_request(child, request, addr, data); break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); return ret; } +asmlinkage int sh64_ptrace(long request, long pid, long addr, long data) +{ + extern void poke_real_address_q(unsigned long long addr, unsigned long long data); +#define WPC_DBRMODE 0x0d104008 + static int first_call = 1; + + lock_kernel(); + if (first_call) { + /* Set WPC.DBRMODE to 0. This makes all debug events get + * delivered through RESVEC, i.e. into the handlers in entry.S. + * (If the kernel was downloaded using a remote gdb, WPC.DBRMODE + * would normally be left set to 1, which makes debug events get + * delivered through DBRVEC, i.e. into the remote gdb's + * handlers. This prevents ptrace getting them, and confuses + * the remote gdb.) */ + printk("DBRMODE set to 0 to permit native debugging\n"); + poke_real_address_q(WPC_DBRMODE, 0); + first_call = 0; + } + unlock_kernel(); + + return sys_ptrace(request, pid, addr, data); +} + asmlinkage void syscall_trace(void) { struct task_struct *tsk = current; diff --git a/arch/sh64/kernel/syscalls.S b/arch/sh64/kernel/syscalls.S index a3d037805f1..c0079d54c85 100644 --- a/arch/sh64/kernel/syscalls.S +++ b/arch/sh64/kernel/syscalls.S @@ -46,7 +46,7 @@ sys_call_table: .long sys_setuid16 .long sys_getuid16 .long sys_stime /* 25 */ - .long sys_ptrace + .long sh64_ptrace .long sys_alarm .long sys_fstat .long sys_pause diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c index 71af4d50389..98e09395c09 100644 --- a/arch/um/kernel/ptrace.c +++ b/arch/um/kernel/ptrace.c @@ -43,53 +43,10 @@ void ptrace_disable(struct task_struct *child) extern int peek_user(struct task_struct * child, long addr, long data); extern int poke_user(struct task_struct * child, long addr, long data); -long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; int i, ret; - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - -#ifdef SUBACH_PTRACE_SPECIAL - SUBARCH_PTRACE_SPECIAL(child,request,addr,data); -#endif - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -282,10 +239,7 @@ long sys_ptrace(long request, long pid, long addr, long data) ret = ptrace_request(child, request, addr, data); break; } - out_tsk: - put_task_struct(child); - out: - unlock_kernel(); + return ret; } diff --git a/arch/v850/kernel/ptrace.c b/arch/v850/kernel/ptrace.c index d6077ff47d2..18492d02aaf 100644 --- a/arch/v850/kernel/ptrace.c +++ b/arch/v850/kernel/ptrace.c @@ -113,45 +113,10 @@ static int set_single_step (struct task_struct *t, int val) return 1; } -long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; int rval; - lock_kernel(); - - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) { - rval = -EPERM; - goto out; - } - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - rval = 0; - goto out; - } - rval = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - rval = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - rval = ptrace_attach(child); - goto out_tsk; - } - rval = ptrace_check_attach(child, request == PTRACE_KILL); - if (rval < 0) - goto out_tsk; - switch (request) { unsigned long val, copied; @@ -248,11 +213,7 @@ long sys_ptrace(long request, long pid, long addr, long data) rval = -EIO; goto out; } - -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); + out: return rval; } diff --git a/arch/x86_64/kernel/ptrace.c b/arch/x86_64/kernel/ptrace.c index bbf64b59a21..a87b6cebe80 100644 --- a/arch/x86_64/kernel/ptrace.c +++ b/arch/x86_64/kernel/ptrace.c @@ -313,48 +313,11 @@ static unsigned long getreg(struct task_struct *child, unsigned long regno) } -asmlinkage long sys_ptrace(long request, long pid, unsigned long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; long i, ret; unsigned ui; - /* This lock_kernel fixes a subtle race with suid exec */ - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -608,10 +571,6 @@ asmlinkage long sys_ptrace(long request, long pid, unsigned long addr, long data ret = ptrace_request(child, request, addr, data); break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); return ret; } diff --git a/arch/xtensa/kernel/ptrace.c b/arch/xtensa/kernel/ptrace.c index 14460743de0..ab5c4c65b5c 100644 --- a/arch/xtensa/kernel/ptrace.c +++ b/arch/xtensa/kernel/ptrace.c @@ -45,58 +45,10 @@ void ptrace_disable(struct task_struct *child) /* Nothing to do.. */ } -long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; int ret = -EPERM; - lock_kernel(); - -#if 0 - if ((int)request != 1) - printk("ptrace(r=%d,pid=%d,addr=%08lx,data=%08lx)\n", - (int) request, (int) pid, (unsigned long) addr, - (unsigned long) data); -#endif - - if (request == PTRACE_TRACEME) { - - /* Are we already being traced? */ - - if (current->ptrace & PT_PTRACED) - goto out; - - if ((ret = security_ptrace(current->parent, current))) - goto out; - - /* Set the ptrace bit in the process flags. */ - - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - if ((ret = ptrace_check_attach(child, request == PTRACE_KILL)) < 0) - goto out_tsk; - switch (request) { case PTRACE_PEEKTEXT: /* read word at location addr. */ case PTRACE_PEEKDATA: @@ -375,10 +327,7 @@ long sys_ptrace(long request, long pid, long addr, long data) ret = ptrace_request(child, request, addr, data); goto out; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); + out: return ret; } -- cgit v1.2.3 From 66ff2d0691e00e1e7bfdf398a970310c9a0fe671 Mon Sep 17 00:00:00 2001 From: Ananth N Mavinakayanahalli Date: Mon, 7 Nov 2005 01:00:07 -0800 Subject: [PATCH] Kprobes: rearrange preempt_disable/enable() calls The following set of patches are aimed at improving kprobes scalability. We currently serialize kprobe registration, unregistration and handler execution using a single spinlock - kprobe_lock. With these changes, kprobe handlers can run without any locks held. It also allows for simultaneous kprobe handler executions on different processors as we now track kprobe execution on a per processor basis. It is now necessary that the handlers be re-entrant since handlers can run concurrently on multiple processors. All changes have been tested on i386, ia64, ppc64 and x86_64, while sparc64 has been compile tested only. The patches can be viewed as 3 logical chunks: patch 1: Reorder preempt_(dis/en)able calls patches 2-7: Introduce per_cpu data areas to track kprobe execution patches 8-9: Use RCU to synchronize kprobe (un)registration and handler execution. Thanks to Maneesh Soni, James Keniston and Anil Keshavamurthy for their review and suggestions. Thanks again to Anil, Hien Nguyen and Kevin Stafford for testing the patches. This patch: Reorder preempt_disable/enable() calls in arch kprobes files in preparation to introduce locking changes. No functional changes introduced by this patch. Signed-off-by: Ananth N Mavinakayahanalli Signed-off-by: Anil S Keshavamurthy Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/kprobes.c | 35 ++++++++++++++++++----------------- arch/ia64/kernel/kprobes.c | 22 ++++++++++++++-------- arch/ppc64/kernel/kprobes.c | 11 ++++++----- arch/sparc64/kernel/kprobes.c | 25 +++++++++++++------------ arch/x86_64/kernel/kprobes.c | 28 ++++++++++++++-------------- 5 files changed, 65 insertions(+), 56 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/kprobes.c b/arch/i386/kernel/kprobes.c index 6345b430b10..fd35039859e 100644 --- a/arch/i386/kernel/kprobes.c +++ b/arch/i386/kernel/kprobes.c @@ -158,8 +158,6 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) kprobe_opcode_t *addr = NULL; unsigned long *lp; - /* We're in an interrupt, but this is clear and BUG()-safe. */ - preempt_disable(); /* Check if the application is using LDT entry for its code segment and * calculate the address by reading the base address from the LDT entry. */ @@ -232,6 +230,11 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) goto no_kprobe; } + /* + * This preempt_disable() matches the preempt_enable_no_resched() + * in post_kprobe_handler() + */ + preempt_disable(); kprobe_status = KPROBE_HIT_ACTIVE; set_current_kprobe(p, regs); @@ -245,7 +248,6 @@ ss_probe: return 1; no_kprobe: - preempt_enable_no_resched(); return ret; } @@ -313,11 +315,11 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) unlock_kprobes(); preempt_enable_no_resched(); - /* - * By returning a non-zero value, we are telling - * kprobe_handler() that we have handled unlocking - * and re-enabling preemption. - */ + /* + * By returning a non-zero value, we are telling + * kprobe_handler() that we have handled unlocking + * and re-enabling preemption + */ return 1; } @@ -453,29 +455,29 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, void *data) { struct die_args *args = (struct die_args *)data; + int ret = NOTIFY_DONE; + + preempt_disable(); switch (val) { case DIE_INT3: if (kprobe_handler(args->regs)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; break; case DIE_DEBUG: if (post_kprobe_handler(args->regs)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; break; case DIE_GPF: - if (kprobe_running() && - kprobe_fault_handler(args->regs, args->trapnr)) - return NOTIFY_STOP; - break; case DIE_PAGE_FAULT: if (kprobe_running() && kprobe_fault_handler(args->regs, args->trapnr)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; break; default: break; } - return NOTIFY_DONE; + preempt_enable(); + return ret; } int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) @@ -502,7 +504,6 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) void __kprobes jprobe_return(void) { - preempt_enable_no_resched(); asm volatile (" xchgl %%ebx,%%esp \n" " int3 \n" " .globl jprobe_return_end \n" diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c index 471086b808a..1e80ec80dd2 100644 --- a/arch/ia64/kernel/kprobes.c +++ b/arch/ia64/kernel/kprobes.c @@ -395,7 +395,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) /* * By returning a non-zero value, we are telling * kprobe_handler() that we have handled unlocking - * and re-enabling preemption. + * and re-enabling preemption */ return 1; } @@ -607,8 +607,6 @@ static int __kprobes pre_kprobes_handler(struct die_args *args) struct pt_regs *regs = args->regs; kprobe_opcode_t *addr = (kprobe_opcode_t *)instruction_pointer(regs); - preempt_disable(); - /* Handle recursion cases */ if (kprobe_running()) { p = get_kprobe(addr); @@ -665,6 +663,11 @@ static int __kprobes pre_kprobes_handler(struct die_args *args) goto no_kprobe; } + /* + * This preempt_disable() matches the preempt_enable_no_resched() + * in post_kprobes_handler() + */ + preempt_disable(); kprobe_status = KPROBE_HIT_ACTIVE; set_current_kprobe(p); @@ -682,7 +685,6 @@ ss_probe: return 1; no_kprobe: - preempt_enable_no_resched(); return ret; } @@ -733,22 +735,26 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, void *data) { struct die_args *args = (struct die_args *)data; + int ret = NOTIFY_DONE; + + preempt_disable(); switch(val) { case DIE_BREAK: if (pre_kprobes_handler(args)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; break; case DIE_SS: if (post_kprobes_handler(args->regs)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; break; case DIE_PAGE_FAULT: if (kprobes_fault_handler(args->regs, args->trapnr)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; default: break; } - return NOTIFY_DONE; + preempt_enable(); + return ret; } int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) diff --git a/arch/ppc64/kernel/kprobes.c b/arch/ppc64/kernel/kprobes.c index ed876a5178a..6071ee99f5c 100644 --- a/arch/ppc64/kernel/kprobes.c +++ b/arch/ppc64/kernel/kprobes.c @@ -209,6 +209,11 @@ static inline int kprobe_handler(struct pt_regs *regs) goto no_kprobe; } + /* + * This preempt_disable() matches the preempt_enable_no_resched() + * in post_kprobe_handler(). + */ + preempt_disable(); kprobe_status = KPROBE_HIT_ACTIVE; current_kprobe = p; kprobe_saved_msr = regs->msr; @@ -219,11 +224,6 @@ static inline int kprobe_handler(struct pt_regs *regs) ss_probe: prepare_singlestep(p, regs); kprobe_status = KPROBE_HIT_SS; - /* - * This preempt_disable() matches the preempt_enable_no_resched() - * in post_kprobe_handler(). - */ - preempt_disable(); return 1; no_kprobe: @@ -293,6 +293,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) regs->nip = orig_ret_address; unlock_kprobes(); + preempt_enable_no_resched(); /* * By returning a non-zero value, we are telling diff --git a/arch/sparc64/kernel/kprobes.c b/arch/sparc64/kernel/kprobes.c index 0d66d07c8c6..755a0d7d887 100644 --- a/arch/sparc64/kernel/kprobes.c +++ b/arch/sparc64/kernel/kprobes.c @@ -118,8 +118,6 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) void *addr = (void *) regs->tpc; int ret = 0; - preempt_disable(); - if (kprobe_running()) { /* We *are* holding lock here, so this is safe. * Disarm the probe we just hit, and ignore it. @@ -171,6 +169,11 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) goto no_kprobe; } + /* + * This preempt_disable() matches the preempt_enable_no_resched() + * in post_kprobes_handler() + */ + preempt_disable(); set_current_kprobe(p, regs); kprobe_status = KPROBE_HIT_ACTIVE; if (p->pre_handler && p->pre_handler(p, regs)) @@ -182,7 +185,6 @@ ss_probe: return 1; no_kprobe: - preempt_enable_no_resched(); return ret; } @@ -322,29 +324,29 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, void *data) { struct die_args *args = (struct die_args *)data; + int ret = NOTIFY_DONE; + + preempt_disable(); switch (val) { case DIE_DEBUG: if (kprobe_handler(args->regs)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; break; case DIE_DEBUG_2: if (post_kprobe_handler(args->regs)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; break; case DIE_GPF: - if (kprobe_running() && - kprobe_fault_handler(args->regs, args->trapnr)) - return NOTIFY_STOP; - break; case DIE_PAGE_FAULT: if (kprobe_running() && kprobe_fault_handler(args->regs, args->trapnr)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; break; default: break; } - return NOTIFY_DONE; + preempt_enable(); + return ret; } asmlinkage void __kprobes kprobe_trap(unsigned long trap_level, @@ -396,7 +398,6 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) void __kprobes jprobe_return(void) { - preempt_enable_no_resched(); __asm__ __volatile__( ".globl jprobe_return_trap_instruction\n" "jprobe_return_trap_instruction:\n\t" diff --git a/arch/x86_64/kernel/kprobes.c b/arch/x86_64/kernel/kprobes.c index 76a28b007be..ebfa2c9241c 100644 --- a/arch/x86_64/kernel/kprobes.c +++ b/arch/x86_64/kernel/kprobes.c @@ -302,9 +302,6 @@ int __kprobes kprobe_handler(struct pt_regs *regs) int ret = 0; kprobe_opcode_t *addr = (kprobe_opcode_t *)(regs->rip - sizeof(kprobe_opcode_t)); - /* We're in an interrupt, but this is clear and BUG()-safe. */ - preempt_disable(); - /* Check we're not actually recursing */ if (kprobe_running()) { /* We *are* holding lock here, so this is safe. @@ -372,6 +369,11 @@ int __kprobes kprobe_handler(struct pt_regs *regs) goto no_kprobe; } + /* + * This preempt_disable() matches the preempt_enable_no_resched() + * in post_kprobe_handler() + */ + preempt_disable(); kprobe_status = KPROBE_HIT_ACTIVE; set_current_kprobe(p, regs); @@ -385,7 +387,6 @@ ss_probe: return 1; no_kprobe: - preempt_enable_no_resched(); return ret; } @@ -456,7 +457,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) /* * By returning a non-zero value, we are telling * kprobe_handler() that we have handled unlocking - * and re-enabling preemption. + * and re-enabling preemption */ return 1; } @@ -599,29 +600,29 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, void *data) { struct die_args *args = (struct die_args *)data; + int ret = NOTIFY_DONE; + + preempt_disable(); switch (val) { case DIE_INT3: if (kprobe_handler(args->regs)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; break; case DIE_DEBUG: if (post_kprobe_handler(args->regs)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; break; case DIE_GPF: - if (kprobe_running() && - kprobe_fault_handler(args->regs, args->trapnr)) - return NOTIFY_STOP; - break; case DIE_PAGE_FAULT: if (kprobe_running() && kprobe_fault_handler(args->regs, args->trapnr)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; break; default: break; } - return NOTIFY_DONE; + preempt_enable(); + return ret; } int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) @@ -647,7 +648,6 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) void __kprobes jprobe_return(void) { - preempt_enable_no_resched(); asm volatile (" xchg %%rbx,%%rsp \n" " int3 \n" " .globl jprobe_return_end \n" -- cgit v1.2.3 From 9a0e3a86837ac7542e601c18346102c9d9e65fa5 Mon Sep 17 00:00:00 2001 From: Ananth N Mavinakayanahalli Date: Mon, 7 Nov 2005 01:00:08 -0800 Subject: [PATCH] Kprobes: Track kprobe on a per_cpu basis - i386 changes I386 changes to track kprobe execution on a per-cpu basis. We now track the kprobe state machine independently on each cpu, using an arch specific kprobe control block. Signed-off-by: Ananth N Mavinakayanahalli Signed-off-by: Anil S Keshavamurthy Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/kprobes.c | 126 +++++++++++++++++++++++++-------------------- 1 file changed, 69 insertions(+), 57 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/kprobes.c b/arch/i386/kernel/kprobes.c index fd35039859e..99565a66915 100644 --- a/arch/i386/kernel/kprobes.c +++ b/arch/i386/kernel/kprobes.c @@ -37,16 +37,11 @@ #include #include -static struct kprobe *current_kprobe; -static unsigned long kprobe_status, kprobe_old_eflags, kprobe_saved_eflags; -static struct kprobe *kprobe_prev; -static unsigned long kprobe_status_prev, kprobe_old_eflags_prev, kprobe_saved_eflags_prev; -static struct pt_regs jprobe_saved_regs; -static long *jprobe_saved_esp; -/* copy of the kernel stack at the probe fire time */ -static kprobe_opcode_t jprobes_stack[MAX_STACK_SIZE]; void jprobe_return_end(void); +DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL; +DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); + /* * returns non-zero if opcode modifies the interrupt flag. */ @@ -91,29 +86,30 @@ void __kprobes arch_remove_kprobe(struct kprobe *p) { } -static inline void save_previous_kprobe(void) +static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb) { - kprobe_prev = current_kprobe; - kprobe_status_prev = kprobe_status; - kprobe_old_eflags_prev = kprobe_old_eflags; - kprobe_saved_eflags_prev = kprobe_saved_eflags; + kcb->prev_kprobe.kp = kprobe_running(); + kcb->prev_kprobe.status = kcb->kprobe_status; + kcb->prev_kprobe.old_eflags = kcb->kprobe_old_eflags; + kcb->prev_kprobe.saved_eflags = kcb->kprobe_saved_eflags; } -static inline void restore_previous_kprobe(void) +static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb) { - current_kprobe = kprobe_prev; - kprobe_status = kprobe_status_prev; - kprobe_old_eflags = kprobe_old_eflags_prev; - kprobe_saved_eflags = kprobe_saved_eflags_prev; + __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp; + kcb->kprobe_status = kcb->prev_kprobe.status; + kcb->kprobe_old_eflags = kcb->prev_kprobe.old_eflags; + kcb->kprobe_saved_eflags = kcb->prev_kprobe.saved_eflags; } -static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs) +static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs, + struct kprobe_ctlblk *kcb) { - current_kprobe = p; - kprobe_saved_eflags = kprobe_old_eflags + __get_cpu_var(current_kprobe) = p; + kcb->kprobe_saved_eflags = kcb->kprobe_old_eflags = (regs->eflags & (TF_MASK | IF_MASK)); if (is_IF_modifier(p->opcode)) - kprobe_saved_eflags &= ~IF_MASK; + kcb->kprobe_saved_eflags &= ~IF_MASK; } static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) @@ -157,6 +153,7 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) int ret = 0; kprobe_opcode_t *addr = NULL; unsigned long *lp; + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); /* Check if the application is using LDT entry for its code segment and * calculate the address by reading the base address from the LDT entry. @@ -175,10 +172,10 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) Disarm the probe we just hit, and ignore it. */ p = get_kprobe(addr); if (p) { - if (kprobe_status == KPROBE_HIT_SS && + if (kcb->kprobe_status == KPROBE_HIT_SS && *p->ainsn.insn == BREAKPOINT_INSTRUCTION) { regs->eflags &= ~TF_MASK; - regs->eflags |= kprobe_saved_eflags; + regs->eflags |= kcb->kprobe_saved_eflags; unlock_kprobes(); goto no_kprobe; } @@ -188,14 +185,14 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) * just single step on the instruction of the new probe * without calling any user handlers. */ - save_previous_kprobe(); - set_current_kprobe(p, regs); + save_previous_kprobe(kcb); + set_current_kprobe(p, regs, kcb); p->nmissed++; prepare_singlestep(p, regs); - kprobe_status = KPROBE_REENTER; + kcb->kprobe_status = KPROBE_REENTER; return 1; } else { - p = current_kprobe; + p = __get_cpu_var(current_kprobe); if (p->break_handler && p->break_handler(p, regs)) { goto ss_probe; } @@ -235,8 +232,8 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) * in post_kprobe_handler() */ preempt_disable(); - kprobe_status = KPROBE_HIT_ACTIVE; - set_current_kprobe(p, regs); + set_current_kprobe(p, regs, kcb); + kcb->kprobe_status = KPROBE_HIT_ACTIVE; if (p->pre_handler && p->pre_handler(p, regs)) /* handler has already set things up, so skip ss setup */ @@ -244,7 +241,7 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) ss_probe: prepare_singlestep(p, regs); - kprobe_status = KPROBE_HIT_SS; + kcb->kprobe_status = KPROBE_HIT_SS; return 1; no_kprobe: @@ -312,6 +309,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) BUG_ON(!orig_ret_address || (orig_ret_address == trampoline_address)); regs->eip = orig_ret_address; + reset_current_kprobe(); unlock_kprobes(); preempt_enable_no_resched(); @@ -345,7 +343,8 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) * that is atop the stack is the address following the copied instruction. * We need to make it the address following the original instruction. */ -static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) +static void __kprobes resume_execution(struct kprobe *p, + struct pt_regs *regs, struct kprobe_ctlblk *kcb) { unsigned long *tos = (unsigned long *)®s->esp; unsigned long next_eip = 0; @@ -355,7 +354,7 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) switch (p->ainsn.insn[0]) { case 0x9c: /* pushfl */ *tos &= ~(TF_MASK | IF_MASK); - *tos |= kprobe_old_eflags; + *tos |= kcb->kprobe_old_eflags; break; case 0xc3: /* ret/lret */ case 0xcb: @@ -400,22 +399,26 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) */ static inline int post_kprobe_handler(struct pt_regs *regs) { - if (!kprobe_running()) + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (!cur) return 0; - if ((kprobe_status != KPROBE_REENTER) && current_kprobe->post_handler) { - kprobe_status = KPROBE_HIT_SSDONE; - current_kprobe->post_handler(current_kprobe, regs, 0); + if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) { + kcb->kprobe_status = KPROBE_HIT_SSDONE; + cur->post_handler(cur, regs, 0); } - resume_execution(current_kprobe, regs); - regs->eflags |= kprobe_saved_eflags; + resume_execution(cur, regs, kcb); + regs->eflags |= kcb->kprobe_saved_eflags; /*Restore back the original saved kprobes variables and continue. */ - if (kprobe_status == KPROBE_REENTER) { - restore_previous_kprobe(); + if (kcb->kprobe_status == KPROBE_REENTER) { + restore_previous_kprobe(kcb); goto out; } + reset_current_kprobe(); unlock_kprobes(); out: preempt_enable_no_resched(); @@ -434,14 +437,17 @@ out: /* Interrupts disabled, kprobe_lock held. */ static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) { - if (current_kprobe->fault_handler - && current_kprobe->fault_handler(current_kprobe, regs, trapnr)) + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) return 1; - if (kprobe_status & KPROBE_HIT_SS) { - resume_execution(current_kprobe, regs); - regs->eflags |= kprobe_old_eflags; + if (kcb->kprobe_status & KPROBE_HIT_SS) { + resume_execution(cur, regs, kcb); + regs->eflags |= kcb->kprobe_old_eflags; + reset_current_kprobe(); unlock_kprobes(); preempt_enable_no_resched(); } @@ -484,10 +490,11 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) { struct jprobe *jp = container_of(p, struct jprobe, kp); unsigned long addr; + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - jprobe_saved_regs = *regs; - jprobe_saved_esp = ®s->esp; - addr = (unsigned long)jprobe_saved_esp; + kcb->jprobe_saved_regs = *regs; + kcb->jprobe_saved_esp = ®s->esp; + addr = (unsigned long)(kcb->jprobe_saved_esp); /* * TBD: As Linus pointed out, gcc assumes that the callee @@ -496,7 +503,8 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) * we also save and restore enough stack bytes to cover * the argument area. */ - memcpy(jprobes_stack, (kprobe_opcode_t *) addr, MIN_STACK_SIZE(addr)); + memcpy(kcb->jprobes_stack, (kprobe_opcode_t *)addr, + MIN_STACK_SIZE(addr)); regs->eflags &= ~IF_MASK; regs->eip = (unsigned long)(jp->entry); return 1; @@ -504,34 +512,38 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) void __kprobes jprobe_return(void) { + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + asm volatile (" xchgl %%ebx,%%esp \n" " int3 \n" " .globl jprobe_return_end \n" " jprobe_return_end: \n" " nop \n"::"b" - (jprobe_saved_esp):"memory"); + (kcb->jprobe_saved_esp):"memory"); } int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) { + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); u8 *addr = (u8 *) (regs->eip - 1); - unsigned long stack_addr = (unsigned long)jprobe_saved_esp; + unsigned long stack_addr = (unsigned long)(kcb->jprobe_saved_esp); struct jprobe *jp = container_of(p, struct jprobe, kp); if ((addr > (u8 *) jprobe_return) && (addr < (u8 *) jprobe_return_end)) { - if (®s->esp != jprobe_saved_esp) { + if (®s->esp != kcb->jprobe_saved_esp) { struct pt_regs *saved_regs = - container_of(jprobe_saved_esp, struct pt_regs, esp); + container_of(kcb->jprobe_saved_esp, + struct pt_regs, esp); printk("current esp %p does not match saved esp %p\n", - ®s->esp, jprobe_saved_esp); + ®s->esp, kcb->jprobe_saved_esp); printk("Saved registers for jprobe %p\n", jp); show_registers(saved_regs); printk("Current registers\n"); show_registers(regs); BUG(); } - *regs = jprobe_saved_regs; - memcpy((kprobe_opcode_t *) stack_addr, jprobes_stack, + *regs = kcb->jprobe_saved_regs; + memcpy((kprobe_opcode_t *) stack_addr, kcb->jprobes_stack, MIN_STACK_SIZE(stack_addr)); return 1; } -- cgit v1.2.3 From 8a5c4dc5e5d72b7802f5647082ccf3861a94f013 Mon Sep 17 00:00:00 2001 From: Ananth N Mavinakayanahalli Date: Mon, 7 Nov 2005 01:00:09 -0800 Subject: [PATCH] Kprobes: Track kprobe on a per_cpu basis - ia64 changes IA64 changes to track kprobe execution on a per-cpu basis. We now track the kprobe state machine independently on each cpu using an arch specific kprobe control block. Signed-off-by: Ananth N Mavinakayanahalli Signed-off-by: Anil S Keshavamurthy Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ia64/kernel/kprobes.c | 83 +++++++++++++++++++++++++--------------------- 1 file changed, 45 insertions(+), 38 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c index 1e80ec80dd2..17e70b1b8d7 100644 --- a/arch/ia64/kernel/kprobes.c +++ b/arch/ia64/kernel/kprobes.c @@ -38,13 +38,8 @@ extern void jprobe_inst_return(void); -/* kprobe_status settings */ -#define KPROBE_HIT_ACTIVE 0x00000001 -#define KPROBE_HIT_SS 0x00000002 - -static struct kprobe *current_kprobe, *kprobe_prev; -static unsigned long kprobe_status, kprobe_status_prev; -static struct pt_regs jprobe_saved_regs; +DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL; +DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); enum instruction_type {A, I, M, F, B, L, X, u}; static enum instruction_type bundle_encoding[32][3] = { @@ -313,21 +308,22 @@ static int __kprobes valid_kprobe_addr(int template, int slot, return 0; } -static inline void save_previous_kprobe(void) +static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb) { - kprobe_prev = current_kprobe; - kprobe_status_prev = kprobe_status; + kcb->prev_kprobe.kp = kprobe_running(); + kcb->prev_kprobe.status = kcb->kprobe_status; } -static inline void restore_previous_kprobe(void) +static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb) { - current_kprobe = kprobe_prev; - kprobe_status = kprobe_status_prev; + __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp; + kcb->kprobe_status = kcb->prev_kprobe.status; } -static inline void set_current_kprobe(struct kprobe *p) +static inline void set_current_kprobe(struct kprobe *p, + struct kprobe_ctlblk *kcb) { - current_kprobe = p; + __get_cpu_var(current_kprobe) = p; } static void kretprobe_trampoline(void) @@ -389,6 +385,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) BUG_ON(!orig_ret_address || (orig_ret_address == trampoline_address)); regs->cr_iip = orig_ret_address; + reset_current_kprobe(); unlock_kprobes(); preempt_enable_no_resched(); @@ -606,12 +603,13 @@ static int __kprobes pre_kprobes_handler(struct die_args *args) int ret = 0; struct pt_regs *regs = args->regs; kprobe_opcode_t *addr = (kprobe_opcode_t *)instruction_pointer(regs); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); /* Handle recursion cases */ if (kprobe_running()) { p = get_kprobe(addr); if (p) { - if ( (kprobe_status == KPROBE_HIT_SS) && + if ((kcb->kprobe_status == KPROBE_HIT_SS) && (p->ainsn.inst_flag == INST_FLAG_BREAK_INST)) { ia64_psr(regs)->ss = 0; unlock_kprobes(); @@ -623,17 +621,17 @@ static int __kprobes pre_kprobes_handler(struct die_args *args) * just single step on the instruction of the new probe * without calling any user handlers. */ - save_previous_kprobe(); - set_current_kprobe(p); + save_previous_kprobe(kcb); + set_current_kprobe(p, kcb); p->nmissed++; prepare_ss(p, regs); - kprobe_status = KPROBE_REENTER; + kcb->kprobe_status = KPROBE_REENTER; return 1; } else if (args->err == __IA64_BREAK_JPROBE) { /* * jprobe instrumented function just completed */ - p = current_kprobe; + p = __get_cpu_var(current_kprobe); if (p->break_handler && p->break_handler(p, regs)) { goto ss_probe; } @@ -668,8 +666,8 @@ static int __kprobes pre_kprobes_handler(struct die_args *args) * in post_kprobes_handler() */ preempt_disable(); - kprobe_status = KPROBE_HIT_ACTIVE; - set_current_kprobe(p); + set_current_kprobe(p, kcb); + kcb->kprobe_status = KPROBE_HIT_ACTIVE; if (p->pre_handler && p->pre_handler(p, regs)) /* @@ -681,7 +679,7 @@ static int __kprobes pre_kprobes_handler(struct die_args *args) ss_probe: prepare_ss(p, regs); - kprobe_status = KPROBE_HIT_SS; + kcb->kprobe_status = KPROBE_HIT_SS; return 1; no_kprobe: @@ -690,22 +688,25 @@ no_kprobe: static int __kprobes post_kprobes_handler(struct pt_regs *regs) { - if (!kprobe_running()) + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (!cur) return 0; - if ((kprobe_status != KPROBE_REENTER) && current_kprobe->post_handler) { - kprobe_status = KPROBE_HIT_SSDONE; - current_kprobe->post_handler(current_kprobe, regs, 0); + if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) { + kcb->kprobe_status = KPROBE_HIT_SSDONE; + cur->post_handler(cur, regs, 0); } - resume_execution(current_kprobe, regs); + resume_execution(cur, regs); /*Restore back the original saved kprobes variables and continue. */ - if (kprobe_status == KPROBE_REENTER) { - restore_previous_kprobe(); + if (kcb->kprobe_status == KPROBE_REENTER) { + restore_previous_kprobe(kcb); goto out; } - + reset_current_kprobe(); unlock_kprobes(); out: @@ -715,15 +716,18 @@ out: static int __kprobes kprobes_fault_handler(struct pt_regs *regs, int trapnr) { - if (!kprobe_running()) + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (!cur) return 0; - if (current_kprobe->fault_handler && - current_kprobe->fault_handler(current_kprobe, regs, trapnr)) + if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) return 1; - if (kprobe_status & KPROBE_HIT_SS) { - resume_execution(current_kprobe, regs); + if (kcb->kprobe_status & KPROBE_HIT_SS) { + resume_execution(cur, regs); + reset_current_kprobe(); unlock_kprobes(); preempt_enable_no_resched(); } @@ -761,9 +765,10 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) { struct jprobe *jp = container_of(p, struct jprobe, kp); unsigned long addr = ((struct fnptr *)(jp->entry))->ip; + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); /* save architectural state */ - jprobe_saved_regs = *regs; + kcb->jprobe_saved_regs = *regs; /* after rfi, execute the jprobe instrumented function */ regs->cr_iip = addr & ~0xFULL; @@ -781,7 +786,9 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) { - *regs = jprobe_saved_regs; + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + *regs = kcb->jprobe_saved_regs; return 1; } -- cgit v1.2.3 From 0dc036c91ac11b2b76bb91b59d8c7af919aa4a8d Mon Sep 17 00:00:00 2001 From: Ananth N Mavinakayanahalli Date: Mon, 7 Nov 2005 01:00:10 -0800 Subject: [PATCH] Kprobes: Track kprobe on a per_cpu basis - ppc64 changes PPC64 changes to track kprobe execution on a per-cpu basis. We now track the kprobe state machine independently on each cpu using an arch specific kprobe control block. Signed-off-by: Ananth N Mavinakayanahalli Signed-off-by: Anil S Keshavamurthy Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc64/kernel/kprobes.c | 94 ++++++++++++++++++++++++++------------------- 1 file changed, 54 insertions(+), 40 deletions(-) (limited to 'arch') diff --git a/arch/ppc64/kernel/kprobes.c b/arch/ppc64/kernel/kprobes.c index 6071ee99f5c..3f89f3e5584 100644 --- a/arch/ppc64/kernel/kprobes.c +++ b/arch/ppc64/kernel/kprobes.c @@ -37,12 +37,8 @@ #include static DECLARE_MUTEX(kprobe_mutex); - -static struct kprobe *current_kprobe; -static unsigned long kprobe_status, kprobe_saved_msr; -static struct kprobe *kprobe_prev; -static unsigned long kprobe_status_prev, kprobe_saved_msr_prev; -static struct pt_regs jprobe_saved_regs; +DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL; +DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); int __kprobes arch_prepare_kprobe(struct kprobe *p) { @@ -108,18 +104,25 @@ static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) regs->nip = (unsigned long)p->ainsn.insn; } -static inline void save_previous_kprobe(void) +static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb) +{ + kcb->prev_kprobe.kp = kprobe_running(); + kcb->prev_kprobe.status = kcb->kprobe_status; + kcb->prev_kprobe.saved_msr = kcb->kprobe_saved_msr; +} + +static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb) { - kprobe_prev = current_kprobe; - kprobe_status_prev = kprobe_status; - kprobe_saved_msr_prev = kprobe_saved_msr; + __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp; + kcb->kprobe_status = kcb->prev_kprobe.status; + kcb->kprobe_saved_msr = kcb->prev_kprobe.saved_msr; } -static inline void restore_previous_kprobe(void) +static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs, + struct kprobe_ctlblk *kcb) { - current_kprobe = kprobe_prev; - kprobe_status = kprobe_status_prev; - kprobe_saved_msr = kprobe_saved_msr_prev; + __get_cpu_var(current_kprobe) = p; + kcb->kprobe_saved_msr = regs->msr; } void __kprobes arch_prepare_kretprobe(struct kretprobe *rp, @@ -145,6 +148,7 @@ static inline int kprobe_handler(struct pt_regs *regs) struct kprobe *p; int ret = 0; unsigned int *addr = (unsigned int *)regs->nip; + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); /* Check we're not actually recursing */ if (kprobe_running()) { @@ -153,10 +157,10 @@ static inline int kprobe_handler(struct pt_regs *regs) p = get_kprobe(addr); if (p) { kprobe_opcode_t insn = *p->ainsn.insn; - if (kprobe_status == KPROBE_HIT_SS && + if (kcb->kprobe_status == KPROBE_HIT_SS && is_trap(insn)) { regs->msr &= ~MSR_SE; - regs->msr |= kprobe_saved_msr; + regs->msr |= kcb->kprobe_saved_msr; unlock_kprobes(); goto no_kprobe; } @@ -166,15 +170,15 @@ static inline int kprobe_handler(struct pt_regs *regs) * just single step on the instruction of the new probe * without calling any user handlers. */ - save_previous_kprobe(); - current_kprobe = p; - kprobe_saved_msr = regs->msr; + save_previous_kprobe(kcb); + set_current_kprobe(p, regs, kcb); + kcb->kprobe_saved_msr = regs->msr; p->nmissed++; prepare_singlestep(p, regs); - kprobe_status = KPROBE_REENTER; + kcb->kprobe_status = KPROBE_REENTER; return 1; } else { - p = current_kprobe; + p = __get_cpu_var(current_kprobe); if (p->break_handler && p->break_handler(p, regs)) { goto ss_probe; } @@ -214,16 +218,15 @@ static inline int kprobe_handler(struct pt_regs *regs) * in post_kprobe_handler(). */ preempt_disable(); - kprobe_status = KPROBE_HIT_ACTIVE; - current_kprobe = p; - kprobe_saved_msr = regs->msr; + kcb->kprobe_status = KPROBE_HIT_ACTIVE; + set_current_kprobe(p, regs, kcb); if (p->pre_handler && p->pre_handler(p, regs)) /* handler has already set things up, so skip ss setup */ return 1; ss_probe: prepare_singlestep(p, regs); - kprobe_status = KPROBE_HIT_SS; + kcb->kprobe_status = KPROBE_HIT_SS; return 1; no_kprobe: @@ -292,6 +295,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) BUG_ON(!orig_ret_address || (orig_ret_address == trampoline_address)); regs->nip = orig_ret_address; + reset_current_kprobe(); unlock_kprobes(); preempt_enable_no_resched(); @@ -324,22 +328,26 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) static inline int post_kprobe_handler(struct pt_regs *regs) { - if (!kprobe_running()) + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (!cur) return 0; - if ((kprobe_status != KPROBE_REENTER) && current_kprobe->post_handler) { - kprobe_status = KPROBE_HIT_SSDONE; - current_kprobe->post_handler(current_kprobe, regs, 0); + if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) { + kcb->kprobe_status = KPROBE_HIT_SSDONE; + cur->post_handler(cur, regs, 0); } - resume_execution(current_kprobe, regs); - regs->msr |= kprobe_saved_msr; + resume_execution(cur, regs); + regs->msr |= kcb->kprobe_saved_msr; /*Restore back the original saved kprobes variables and continue. */ - if (kprobe_status == KPROBE_REENTER) { - restore_previous_kprobe(); + if (kcb->kprobe_status == KPROBE_REENTER) { + restore_previous_kprobe(kcb); goto out; } + reset_current_kprobe(); unlock_kprobes(); out: preempt_enable_no_resched(); @@ -358,15 +366,18 @@ out: /* Interrupts disabled, kprobe_lock held. */ static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) { - if (current_kprobe->fault_handler - && current_kprobe->fault_handler(current_kprobe, regs, trapnr)) + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) return 1; - if (kprobe_status & KPROBE_HIT_SS) { - resume_execution(current_kprobe, regs); + if (kcb->kprobe_status & KPROBE_HIT_SS) { + resume_execution(cur, regs); regs->msr &= ~MSR_SE; - regs->msr |= kprobe_saved_msr; + regs->msr |= kcb->kprobe_saved_msr; + reset_current_kprobe(); unlock_kprobes(); preempt_enable_no_resched(); } @@ -411,8 +422,9 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) { struct jprobe *jp = container_of(p, struct jprobe, kp); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - memcpy(&jprobe_saved_regs, regs, sizeof(struct pt_regs)); + memcpy(&kcb->jprobe_saved_regs, regs, sizeof(struct pt_regs)); /* setup return addr to the jprobe handler routine */ regs->nip = (unsigned long)(((func_descr_t *)jp->entry)->entry); @@ -432,12 +444,14 @@ void __kprobes jprobe_return_end(void) int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) { + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + /* * FIXME - we should ideally be validating that we got here 'cos * of the "trap" in jprobe_return() above, before restoring the * saved regs... */ - memcpy(regs, &jprobe_saved_regs, sizeof(struct pt_regs)); + memcpy(regs, &kcb->jprobe_saved_regs, sizeof(struct pt_regs)); return 1; } -- cgit v1.2.3 From f215d985e936cf493959b365a10593b6d5f80447 Mon Sep 17 00:00:00 2001 From: Ananth N Mavinakayanahalli Date: Mon, 7 Nov 2005 01:00:11 -0800 Subject: [PATCH] Kprobes: Track kprobe on a per_cpu basis - sparc64 changes Sparc64 changes to track kprobe execution on a per-cpu basis. We now track the kprobe state machine independently on each cpu using an arch specific kprobe control block. Signed-off-by: Ananth N Mavinakayanahalli Signed-off-by: Anil S Keshavamurthy Cc: "David S. Miller" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/sparc64/kernel/kprobes.c | 131 +++++++++++++++++++++--------------------- 1 file changed, 67 insertions(+), 64 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/kprobes.c b/arch/sparc64/kernel/kprobes.c index 755a0d7d887..b95984154db 100644 --- a/arch/sparc64/kernel/kprobes.c +++ b/arch/sparc64/kernel/kprobes.c @@ -38,6 +38,9 @@ * - Mark that we are no longer actively in a kprobe. */ +DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL; +DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); + int __kprobes arch_prepare_kprobe(struct kprobe *p) { return 0; @@ -66,46 +69,39 @@ void __kprobes arch_remove_kprobe(struct kprobe *p) { } -static struct kprobe *current_kprobe; -static unsigned long current_kprobe_orig_tnpc; -static unsigned long current_kprobe_orig_tstate_pil; -static unsigned int kprobe_status; -static struct kprobe *kprobe_prev; -static unsigned long kprobe_orig_tnpc_prev; -static unsigned long kprobe_orig_tstate_pil_prev; -static unsigned int kprobe_status_prev; - -static inline void save_previous_kprobe(void) +static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb) { - kprobe_status_prev = kprobe_status; - kprobe_orig_tnpc_prev = current_kprobe_orig_tnpc; - kprobe_orig_tstate_pil_prev = current_kprobe_orig_tstate_pil; - kprobe_prev = current_kprobe; + kcb->prev_kprobe.kp = kprobe_running(); + kcb->prev_kprobe.status = kcb->kprobe_status; + kcb->prev_kprobe.orig_tnpc = kcb->kprobe_orig_tnpc; + kcb->prev_kprobe.orig_tstate_pil = kcb->kprobe_orig_tstate_pil; } -static inline void restore_previous_kprobe(void) +static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb) { - kprobe_status = kprobe_status_prev; - current_kprobe_orig_tnpc = kprobe_orig_tnpc_prev; - current_kprobe_orig_tstate_pil = kprobe_orig_tstate_pil_prev; - current_kprobe = kprobe_prev; + __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp; + kcb->kprobe_status = kcb->prev_kprobe.status; + kcb->kprobe_orig_tnpc = kcb->prev_kprobe.orig_tnpc; + kcb->kprobe_orig_tstate_pil = kcb->prev_kprobe.orig_tstate_pil; } -static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs) +static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs, + struct kprobe_ctlblk *kcb) { - current_kprobe_orig_tnpc = regs->tnpc; - current_kprobe_orig_tstate_pil = (regs->tstate & TSTATE_PIL); - current_kprobe = p; + __get_cpu_var(current_kprobe) = p; + kcb->kprobe_orig_tnpc = regs->tnpc; + kcb->kprobe_orig_tstate_pil = (regs->tstate & TSTATE_PIL); } -static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) +static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs, + struct kprobe_ctlblk *kcb) { regs->tstate |= TSTATE_PIL; /*single step inline, if it a breakpoint instruction*/ if (p->opcode == BREAKPOINT_INSTRUCTION) { regs->tpc = (unsigned long) p->addr; - regs->tnpc = current_kprobe_orig_tnpc; + regs->tnpc = kcb->kprobe_orig_tnpc; } else { regs->tpc = (unsigned long) &p->ainsn.insn[0]; regs->tnpc = (unsigned long) &p->ainsn.insn[1]; @@ -117,6 +113,7 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) struct kprobe *p; void *addr = (void *) regs->tpc; int ret = 0; + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); if (kprobe_running()) { /* We *are* holding lock here, so this is safe. @@ -124,9 +121,9 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) */ p = get_kprobe(addr); if (p) { - if (kprobe_status == KPROBE_HIT_SS) { + if (kcb->kprobe_status == KPROBE_HIT_SS) { regs->tstate = ((regs->tstate & ~TSTATE_PIL) | - current_kprobe_orig_tstate_pil); + kcb->kprobe_orig_tstate_pil); unlock_kprobes(); goto no_kprobe; } @@ -136,14 +133,14 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) * just single step on the instruction of the new probe * without calling any user handlers. */ - save_previous_kprobe(); - set_current_kprobe(p, regs); + save_previous_kprobe(kcb); + set_current_kprobe(p, regs, kcb); p->nmissed++; - kprobe_status = KPROBE_REENTER; - prepare_singlestep(p, regs); + kcb->kprobe_status = KPROBE_REENTER; + prepare_singlestep(p, regs, kcb); return 1; } else { - p = current_kprobe; + p = __get_cpu_var(current_kprobe); if (p->break_handler && p->break_handler(p, regs)) goto ss_probe; } @@ -174,14 +171,14 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) * in post_kprobes_handler() */ preempt_disable(); - set_current_kprobe(p, regs); - kprobe_status = KPROBE_HIT_ACTIVE; + set_current_kprobe(p, regs, kcb); + kcb->kprobe_status = KPROBE_HIT_ACTIVE; if (p->pre_handler && p->pre_handler(p, regs)) return 1; ss_probe: - prepare_singlestep(p, regs); - kprobe_status = KPROBE_HIT_SS; + prepare_singlestep(p, regs, kcb); + kcb->kprobe_status = KPROBE_HIT_SS; return 1; no_kprobe: @@ -262,11 +259,12 @@ static void __kprobes retpc_fixup(struct pt_regs *regs, u32 insn, * This function prepares to return from the post-single-step * breakpoint trap. */ -static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) +static void __kprobes resume_execution(struct kprobe *p, + struct pt_regs *regs, struct kprobe_ctlblk *kcb) { u32 insn = p->ainsn.insn[0]; - regs->tpc = current_kprobe_orig_tnpc; + regs->tpc = kcb->kprobe_orig_tnpc; regs->tnpc = relbranch_fixup(insn, (unsigned long) p->addr, (unsigned long) &p->ainsn.insn[0], @@ -274,26 +272,30 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) retpc_fixup(regs, insn, (unsigned long) p->addr); regs->tstate = ((regs->tstate & ~TSTATE_PIL) | - current_kprobe_orig_tstate_pil); + kcb->kprobe_orig_tstate_pil); } static inline int post_kprobe_handler(struct pt_regs *regs) { - if (!kprobe_running()) + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (!cur) return 0; - if ((kprobe_status != KPROBE_REENTER) && current_kprobe->post_handler) { - kprobe_status = KPROBE_HIT_SSDONE; - current_kprobe->post_handler(current_kprobe, regs, 0); + if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) { + kcb->kprobe_status = KPROBE_HIT_SSDONE; + cur->post_handler(cur, regs, 0); } - resume_execution(current_kprobe, regs); + resume_execution(cur, regs, kcb); /*Restore back the original saved kprobes variables and continue. */ - if (kprobe_status == KPROBE_REENTER) { - restore_previous_kprobe(); + if (kcb->kprobe_status == KPROBE_REENTER) { + restore_previous_kprobe(kcb); goto out; } + reset_current_kprobe(); unlock_kprobes(); out: preempt_enable_no_resched(); @@ -304,13 +306,16 @@ out: /* Interrupts disabled, kprobe_lock held. */ static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) { - if (current_kprobe->fault_handler - && current_kprobe->fault_handler(current_kprobe, regs, trapnr)) + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) return 1; - if (kprobe_status & KPROBE_HIT_SS) { - resume_execution(current_kprobe, regs); + if (kcb->kprobe_status & KPROBE_HIT_SS) { + resume_execution(cur, regs, kcb); + reset_current_kprobe(); unlock_kprobes(); preempt_enable_no_resched(); } @@ -370,24 +375,21 @@ asmlinkage void __kprobes kprobe_trap(unsigned long trap_level, } /* Jprobes support. */ -static struct pt_regs jprobe_saved_regs; -static struct pt_regs *jprobe_saved_regs_location; -static struct sparc_stackf jprobe_saved_stack; - int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) { struct jprobe *jp = container_of(p, struct jprobe, kp); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - jprobe_saved_regs_location = regs; - memcpy(&jprobe_saved_regs, regs, sizeof(*regs)); + kcb->jprobe_saved_regs_location = regs; + memcpy(&(kcb->jprobe_saved_regs), regs, sizeof(*regs)); /* Save a whole stack frame, this gets arguments * pushed onto the stack after using up all the * arg registers. */ - memcpy(&jprobe_saved_stack, + memcpy(&(kcb->jprobe_saved_stack), (char *) (regs->u_regs[UREG_FP] + STACK_BIAS), - sizeof(jprobe_saved_stack)); + sizeof(kcb->jprobe_saved_stack)); regs->tpc = (unsigned long) jp->entry; regs->tnpc = ((unsigned long) jp->entry) + 0x4UL; @@ -411,14 +413,15 @@ extern void __show_regs(struct pt_regs * regs); int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) { u32 *addr = (u32 *) regs->tpc; + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); if (addr == (u32 *) jprobe_return_trap_instruction) { - if (jprobe_saved_regs_location != regs) { + if (kcb->jprobe_saved_regs_location != regs) { printk("JPROBE: Current regs (%p) does not match " "saved regs (%p).\n", - regs, jprobe_saved_regs_location); + regs, kcb->jprobe_saved_regs_location); printk("JPROBE: Saved registers\n"); - __show_regs(jprobe_saved_regs_location); + __show_regs(kcb->jprobe_saved_regs_location); printk("JPROBE: Current registers\n"); __show_regs(regs); BUG(); @@ -427,11 +430,11 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) * first so that UREG_FP is the original one for * the stack frame restore. */ - memcpy(regs, &jprobe_saved_regs, sizeof(*regs)); + memcpy(regs, &(kcb->jprobe_saved_regs), sizeof(*regs)); memcpy((char *) (regs->u_regs[UREG_FP] + STACK_BIAS), - &jprobe_saved_stack, - sizeof(jprobe_saved_stack)); + &(kcb->jprobe_saved_stack), + sizeof(kcb->jprobe_saved_stack)); return 1; } -- cgit v1.2.3 From e7a510f92c1e482a7db05afd3cb84af1f4cfe0bc Mon Sep 17 00:00:00 2001 From: Ananth N Mavinakayanahalli Date: Mon, 7 Nov 2005 01:00:12 -0800 Subject: [PATCH] Kprobes: Track kprobe on a per_cpu basis - x86_64 changes x86_64 changes to track kprobe execution on a per-cpu basis. We now track the kprobe state machine independently on each cpu using a arch specific kprobe control block. Signed-off-by: Ananth N Mavinakayanahalli Signed-off-by: Anil S Keshavamurthy Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/kprobes.c | 129 +++++++++++++++++++++++-------------------- 1 file changed, 70 insertions(+), 59 deletions(-) (limited to 'arch') diff --git a/arch/x86_64/kernel/kprobes.c b/arch/x86_64/kernel/kprobes.c index ebfa2c9241c..6cb40d133b7 100644 --- a/arch/x86_64/kernel/kprobes.c +++ b/arch/x86_64/kernel/kprobes.c @@ -44,17 +44,10 @@ #include static DECLARE_MUTEX(kprobe_mutex); - -static struct kprobe *current_kprobe; -static unsigned long kprobe_status, kprobe_old_rflags, kprobe_saved_rflags; -static struct kprobe *kprobe_prev; -static unsigned long kprobe_status_prev, kprobe_old_rflags_prev, kprobe_saved_rflags_prev; -static struct pt_regs jprobe_saved_regs; -static long *jprobe_saved_rsp; void jprobe_return_end(void); -/* copy of the kernel stack at the probe fire time */ -static kprobe_opcode_t jprobes_stack[MAX_STACK_SIZE]; +DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL; +DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); /* * returns non-zero if opcode modifies the interrupt flag. @@ -236,29 +229,30 @@ void __kprobes arch_remove_kprobe(struct kprobe *p) up(&kprobe_mutex); } -static inline void save_previous_kprobe(void) +static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb) { - kprobe_prev = current_kprobe; - kprobe_status_prev = kprobe_status; - kprobe_old_rflags_prev = kprobe_old_rflags; - kprobe_saved_rflags_prev = kprobe_saved_rflags; + kcb->prev_kprobe.kp = kprobe_running(); + kcb->prev_kprobe.status = kcb->kprobe_status; + kcb->prev_kprobe.old_rflags = kcb->kprobe_old_rflags; + kcb->prev_kprobe.saved_rflags = kcb->kprobe_saved_rflags; } -static inline void restore_previous_kprobe(void) +static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb) { - current_kprobe = kprobe_prev; - kprobe_status = kprobe_status_prev; - kprobe_old_rflags = kprobe_old_rflags_prev; - kprobe_saved_rflags = kprobe_saved_rflags_prev; + __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp; + kcb->kprobe_status = kcb->prev_kprobe.status; + kcb->kprobe_old_rflags = kcb->prev_kprobe.old_rflags; + kcb->kprobe_saved_rflags = kcb->prev_kprobe.saved_rflags; } -static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs) +static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs, + struct kprobe_ctlblk *kcb) { - current_kprobe = p; - kprobe_saved_rflags = kprobe_old_rflags + __get_cpu_var(current_kprobe) = p; + kcb->kprobe_saved_rflags = kcb->kprobe_old_rflags = (regs->eflags & (TF_MASK | IF_MASK)); if (is_IF_modifier(p->ainsn.insn)) - kprobe_saved_rflags &= ~IF_MASK; + kcb->kprobe_saved_rflags &= ~IF_MASK; } static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs) @@ -301,6 +295,7 @@ int __kprobes kprobe_handler(struct pt_regs *regs) struct kprobe *p; int ret = 0; kprobe_opcode_t *addr = (kprobe_opcode_t *)(regs->rip - sizeof(kprobe_opcode_t)); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); /* Check we're not actually recursing */ if (kprobe_running()) { @@ -308,13 +303,13 @@ int __kprobes kprobe_handler(struct pt_regs *regs) Disarm the probe we just hit, and ignore it. */ p = get_kprobe(addr); if (p) { - if (kprobe_status == KPROBE_HIT_SS && + if (kcb->kprobe_status == KPROBE_HIT_SS && *p->ainsn.insn == BREAKPOINT_INSTRUCTION) { regs->eflags &= ~TF_MASK; - regs->eflags |= kprobe_saved_rflags; + regs->eflags |= kcb->kprobe_saved_rflags; unlock_kprobes(); goto no_kprobe; - } else if (kprobe_status == KPROBE_HIT_SSDONE) { + } else if (kcb->kprobe_status == KPROBE_HIT_SSDONE) { /* TODO: Provide re-entrancy from * post_kprobes_handler() and avoid exception * stack corruption while single-stepping on @@ -322,6 +317,7 @@ int __kprobes kprobe_handler(struct pt_regs *regs) */ arch_disarm_kprobe(p); regs->rip = (unsigned long)p->addr; + reset_current_kprobe(); ret = 1; } else { /* We have reentered the kprobe_handler(), since @@ -331,15 +327,15 @@ int __kprobes kprobe_handler(struct pt_regs *regs) * of the new probe without calling any user * handlers. */ - save_previous_kprobe(); - set_current_kprobe(p, regs); + save_previous_kprobe(kcb); + set_current_kprobe(p, regs, kcb); p->nmissed++; prepare_singlestep(p, regs); - kprobe_status = KPROBE_REENTER; + kcb->kprobe_status = KPROBE_REENTER; return 1; } } else { - p = current_kprobe; + p = __get_cpu_var(current_kprobe); if (p->break_handler && p->break_handler(p, regs)) { goto ss_probe; } @@ -374,8 +370,8 @@ int __kprobes kprobe_handler(struct pt_regs *regs) * in post_kprobe_handler() */ preempt_disable(); - kprobe_status = KPROBE_HIT_ACTIVE; - set_current_kprobe(p, regs); + set_current_kprobe(p, regs, kcb); + kcb->kprobe_status = KPROBE_HIT_ACTIVE; if (p->pre_handler && p->pre_handler(p, regs)) /* handler has already set things up, so skip ss setup */ @@ -383,7 +379,7 @@ int __kprobes kprobe_handler(struct pt_regs *regs) ss_probe: prepare_singlestep(p, regs); - kprobe_status = KPROBE_HIT_SS; + kcb->kprobe_status = KPROBE_HIT_SS; return 1; no_kprobe: @@ -451,6 +447,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) BUG_ON(!orig_ret_address || (orig_ret_address == trampoline_address)); regs->rip = orig_ret_address; + reset_current_kprobe(); unlock_kprobes(); preempt_enable_no_resched(); @@ -484,7 +481,8 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) * that is atop the stack is the address following the copied instruction. * We need to make it the address following the original instruction. */ -static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) +static void __kprobes resume_execution(struct kprobe *p, + struct pt_regs *regs, struct kprobe_ctlblk *kcb) { unsigned long *tos = (unsigned long *)regs->rsp; unsigned long next_rip = 0; @@ -499,7 +497,7 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) switch (*insn) { case 0x9c: /* pushfl */ *tos &= ~(TF_MASK | IF_MASK); - *tos |= kprobe_old_rflags; + *tos |= kcb->kprobe_old_rflags; break; case 0xc3: /* ret/lret */ case 0xcb: @@ -544,24 +542,28 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) */ int __kprobes post_kprobe_handler(struct pt_regs *regs) { - if (!kprobe_running()) + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (!cur) return 0; - if ((kprobe_status != KPROBE_REENTER) && current_kprobe->post_handler) { - kprobe_status = KPROBE_HIT_SSDONE; - current_kprobe->post_handler(current_kprobe, regs, 0); + if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) { + kcb->kprobe_status = KPROBE_HIT_SSDONE; + cur->post_handler(cur, regs, 0); } - resume_execution(current_kprobe, regs); - regs->eflags |= kprobe_saved_rflags; + resume_execution(cur, regs, kcb); + regs->eflags |= kcb->kprobe_saved_rflags; /* Restore the original saved kprobes variables and continue. */ - if (kprobe_status == KPROBE_REENTER) { - restore_previous_kprobe(); + if (kcb->kprobe_status == KPROBE_REENTER) { + restore_previous_kprobe(kcb); goto out; } else { unlock_kprobes(); } + reset_current_kprobe(); out: preempt_enable_no_resched(); @@ -579,14 +581,17 @@ out: /* Interrupts disabled, kprobe_lock held. */ int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr) { - if (current_kprobe->fault_handler - && current_kprobe->fault_handler(current_kprobe, regs, trapnr)) + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) return 1; - if (kprobe_status & KPROBE_HIT_SS) { - resume_execution(current_kprobe, regs); - regs->eflags |= kprobe_old_rflags; + if (kcb->kprobe_status & KPROBE_HIT_SS) { + resume_execution(cur, regs, kcb); + regs->eflags |= kcb->kprobe_old_rflags; + reset_current_kprobe(); unlock_kprobes(); preempt_enable_no_resched(); } @@ -629,10 +634,11 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) { struct jprobe *jp = container_of(p, struct jprobe, kp); unsigned long addr; + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - jprobe_saved_regs = *regs; - jprobe_saved_rsp = (long *) regs->rsp; - addr = (unsigned long)jprobe_saved_rsp; + kcb->jprobe_saved_regs = *regs; + kcb->jprobe_saved_rsp = (long *) regs->rsp; + addr = (unsigned long)(kcb->jprobe_saved_rsp); /* * As Linus pointed out, gcc assumes that the callee * owns the argument space and could overwrite it, e.g. @@ -640,7 +646,8 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) * we also save and restore enough stack bytes to cover * the argument area. */ - memcpy(jprobes_stack, (kprobe_opcode_t *) addr, MIN_STACK_SIZE(addr)); + memcpy(kcb->jprobes_stack, (kprobe_opcode_t *)addr, + MIN_STACK_SIZE(addr)); regs->eflags &= ~IF_MASK; regs->rip = (unsigned long)(jp->entry); return 1; @@ -648,34 +655,38 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) void __kprobes jprobe_return(void) { + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + asm volatile (" xchg %%rbx,%%rsp \n" " int3 \n" " .globl jprobe_return_end \n" " jprobe_return_end: \n" " nop \n"::"b" - (jprobe_saved_rsp):"memory"); + (kcb->jprobe_saved_rsp):"memory"); } int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) { + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); u8 *addr = (u8 *) (regs->rip - 1); - unsigned long stack_addr = (unsigned long)jprobe_saved_rsp; + unsigned long stack_addr = (unsigned long)(kcb->jprobe_saved_rsp); struct jprobe *jp = container_of(p, struct jprobe, kp); if ((addr > (u8 *) jprobe_return) && (addr < (u8 *) jprobe_return_end)) { - if ((long *)regs->rsp != jprobe_saved_rsp) { + if ((long *)regs->rsp != kcb->jprobe_saved_rsp) { struct pt_regs *saved_regs = - container_of(jprobe_saved_rsp, struct pt_regs, rsp); + container_of(kcb->jprobe_saved_rsp, + struct pt_regs, rsp); printk("current rsp %p does not match saved rsp %p\n", - (long *)regs->rsp, jprobe_saved_rsp); + (long *)regs->rsp, kcb->jprobe_saved_rsp); printk("Saved registers for jprobe %p\n", jp); show_registers(saved_regs); printk("Current registers\n"); show_registers(regs); BUG(); } - *regs = jprobe_saved_regs; - memcpy((kprobe_opcode_t *) stack_addr, jprobes_stack, + *regs = kcb->jprobe_saved_regs; + memcpy((kprobe_opcode_t *) stack_addr, kcb->jprobes_stack, MIN_STACK_SIZE(stack_addr)); return 1; } -- cgit v1.2.3 From 991a51d83a3d9bebfafdd1e692cf310899d60791 Mon Sep 17 00:00:00 2001 From: Ananth N Mavinakayanahalli Date: Mon, 7 Nov 2005 01:00:14 -0800 Subject: [PATCH] Kprobes: Use RCU for (un)register synchronization - arch changes Changes to the arch kprobes infrastructure to take advantage of the locking changes introduced by usage of RCU for synchronization. All handlers are now run without any locks held, so they have to be re-entrant or provide their own synchronization. Signed-off-by: Ananth N Mavinakayanahalli Signed-off-by: Anil S Keshavamurthy Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/kprobes.c | 22 +++++++--------------- arch/ia64/kernel/kprobes.c | 16 ++++++---------- arch/ppc64/kernel/kprobes.c | 24 ++++++------------------ arch/sparc64/kernel/kprobes.c | 14 ++------------ arch/x86_64/kernel/kprobes.c | 25 ++++++------------------- 5 files changed, 27 insertions(+), 74 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/kprobes.c b/arch/i386/kernel/kprobes.c index 99565a66915..ad469299267 100644 --- a/arch/i386/kernel/kprobes.c +++ b/arch/i386/kernel/kprobes.c @@ -31,7 +31,6 @@ #include #include #include -#include #include #include #include @@ -123,6 +122,7 @@ static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) regs->eip = (unsigned long)&p->ainsn.insn; } +/* Called with kretprobe_lock held */ void __kprobes arch_prepare_kretprobe(struct kretprobe *rp, struct pt_regs *regs) { @@ -168,15 +168,12 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) } /* Check we're not actually recursing */ if (kprobe_running()) { - /* We *are* holding lock here, so this is safe. - Disarm the probe we just hit, and ignore it. */ p = get_kprobe(addr); if (p) { if (kcb->kprobe_status == KPROBE_HIT_SS && *p->ainsn.insn == BREAKPOINT_INSTRUCTION) { regs->eflags &= ~TF_MASK; regs->eflags |= kcb->kprobe_saved_eflags; - unlock_kprobes(); goto no_kprobe; } /* We have reentered the kprobe_handler(), since @@ -197,14 +194,11 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) goto ss_probe; } } - /* If it's not ours, can't be delete race, (we hold lock). */ goto no_kprobe; } - lock_kprobes(); p = get_kprobe(addr); if (!p) { - unlock_kprobes(); if (regs->eflags & VM_MASK) { /* We are in virtual-8086 mode. Return 0 */ goto no_kprobe; @@ -268,9 +262,10 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) struct kretprobe_instance *ri = NULL; struct hlist_head *head; struct hlist_node *node, *tmp; - unsigned long orig_ret_address = 0; + unsigned long flags, orig_ret_address = 0; unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline; + spin_lock_irqsave(&kretprobe_lock, flags); head = kretprobe_inst_table_head(current); /* @@ -310,7 +305,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) regs->eip = orig_ret_address; reset_current_kprobe(); - unlock_kprobes(); + spin_unlock_irqrestore(&kretprobe_lock, flags); preempt_enable_no_resched(); /* @@ -395,7 +390,7 @@ static void __kprobes resume_execution(struct kprobe *p, /* * Interrupts are disabled on entry as trap1 is an interrupt gate and they - * remain disabled thoroughout this function. And we hold kprobe lock. + * remain disabled thoroughout this function. */ static inline int post_kprobe_handler(struct pt_regs *regs) { @@ -419,7 +414,6 @@ static inline int post_kprobe_handler(struct pt_regs *regs) goto out; } reset_current_kprobe(); - unlock_kprobes(); out: preempt_enable_no_resched(); @@ -434,7 +428,6 @@ out: return 1; } -/* Interrupts disabled, kprobe_lock held. */ static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) { struct kprobe *cur = kprobe_running(); @@ -448,7 +441,6 @@ static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) regs->eflags |= kcb->kprobe_old_eflags; reset_current_kprobe(); - unlock_kprobes(); preempt_enable_no_resched(); } return 0; @@ -463,7 +455,7 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, struct die_args *args = (struct die_args *)data; int ret = NOTIFY_DONE; - preempt_disable(); + rcu_read_lock(); switch (val) { case DIE_INT3: if (kprobe_handler(args->regs)) @@ -482,7 +474,7 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, default: break; } - preempt_enable(); + rcu_read_unlock(); return ret; } diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c index 17e70b1b8d7..fddbac32d44 100644 --- a/arch/ia64/kernel/kprobes.c +++ b/arch/ia64/kernel/kprobes.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include #include @@ -343,10 +342,11 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) struct kretprobe_instance *ri = NULL; struct hlist_head *head; struct hlist_node *node, *tmp; - unsigned long orig_ret_address = 0; + unsigned long flags, orig_ret_address = 0; unsigned long trampoline_address = ((struct fnptr *)kretprobe_trampoline)->ip; + spin_lock_irqsave(&kretprobe_lock, flags); head = kretprobe_inst_table_head(current); /* @@ -386,7 +386,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) regs->cr_iip = orig_ret_address; reset_current_kprobe(); - unlock_kprobes(); + spin_unlock_irqrestore(&kretprobe_lock, flags); preempt_enable_no_resched(); /* @@ -397,6 +397,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) return 1; } +/* Called with kretprobe_lock held */ void __kprobes arch_prepare_kretprobe(struct kretprobe *rp, struct pt_regs *regs) { @@ -612,7 +613,6 @@ static int __kprobes pre_kprobes_handler(struct die_args *args) if ((kcb->kprobe_status == KPROBE_HIT_SS) && (p->ainsn.inst_flag == INST_FLAG_BREAK_INST)) { ia64_psr(regs)->ss = 0; - unlock_kprobes(); goto no_kprobe; } /* We have reentered the pre_kprobe_handler(), since @@ -641,10 +641,8 @@ static int __kprobes pre_kprobes_handler(struct die_args *args) } } - lock_kprobes(); p = get_kprobe(addr); if (!p) { - unlock_kprobes(); if (!is_ia64_break_inst(regs)) { /* * The breakpoint instruction was removed right @@ -707,7 +705,6 @@ static int __kprobes post_kprobes_handler(struct pt_regs *regs) goto out; } reset_current_kprobe(); - unlock_kprobes(); out: preempt_enable_no_resched(); @@ -728,7 +725,6 @@ static int __kprobes kprobes_fault_handler(struct pt_regs *regs, int trapnr) if (kcb->kprobe_status & KPROBE_HIT_SS) { resume_execution(cur, regs); reset_current_kprobe(); - unlock_kprobes(); preempt_enable_no_resched(); } @@ -741,7 +737,7 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, struct die_args *args = (struct die_args *)data; int ret = NOTIFY_DONE; - preempt_disable(); + rcu_read_lock(); switch(val) { case DIE_BREAK: if (pre_kprobes_handler(args)) @@ -757,7 +753,7 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, default: break; } - preempt_enable(); + rcu_read_unlock(); return ret; } diff --git a/arch/ppc64/kernel/kprobes.c b/arch/ppc64/kernel/kprobes.c index 3f89f3e5584..e0a25b35437 100644 --- a/arch/ppc64/kernel/kprobes.c +++ b/arch/ppc64/kernel/kprobes.c @@ -30,7 +30,6 @@ #include #include #include -#include #include #include #include @@ -125,6 +124,7 @@ static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs, kcb->kprobe_saved_msr = regs->msr; } +/* Called with kretprobe_lock held */ void __kprobes arch_prepare_kretprobe(struct kretprobe *rp, struct pt_regs *regs) { @@ -152,8 +152,6 @@ static inline int kprobe_handler(struct pt_regs *regs) /* Check we're not actually recursing */ if (kprobe_running()) { - /* We *are* holding lock here, so this is safe. - Disarm the probe we just hit, and ignore it. */ p = get_kprobe(addr); if (p) { kprobe_opcode_t insn = *p->ainsn.insn; @@ -161,7 +159,6 @@ static inline int kprobe_handler(struct pt_regs *regs) is_trap(insn)) { regs->msr &= ~MSR_SE; regs->msr |= kcb->kprobe_saved_msr; - unlock_kprobes(); goto no_kprobe; } /* We have reentered the kprobe_handler(), since @@ -183,14 +180,11 @@ static inline int kprobe_handler(struct pt_regs *regs) goto ss_probe; } } - /* If it's not ours, can't be delete race, (we hold lock). */ goto no_kprobe; } - lock_kprobes(); p = get_kprobe(addr); if (!p) { - unlock_kprobes(); if (*addr != BREAKPOINT_INSTRUCTION) { /* * PowerPC has multiple variants of the "trap" @@ -254,9 +248,10 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) struct kretprobe_instance *ri = NULL; struct hlist_head *head; struct hlist_node *node, *tmp; - unsigned long orig_ret_address = 0; + unsigned long flags, orig_ret_address = 0; unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline; + spin_lock_irqsave(&kretprobe_lock, flags); head = kretprobe_inst_table_head(current); /* @@ -296,7 +291,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) regs->nip = orig_ret_address; reset_current_kprobe(); - unlock_kprobes(); + spin_unlock_irqrestore(&kretprobe_lock, flags); preempt_enable_no_resched(); /* @@ -348,7 +343,6 @@ static inline int post_kprobe_handler(struct pt_regs *regs) goto out; } reset_current_kprobe(); - unlock_kprobes(); out: preempt_enable_no_resched(); @@ -363,7 +357,6 @@ out: return 1; } -/* Interrupts disabled, kprobe_lock held. */ static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) { struct kprobe *cur = kprobe_running(); @@ -378,7 +371,6 @@ static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) regs->msr |= kcb->kprobe_saved_msr; reset_current_kprobe(); - unlock_kprobes(); preempt_enable_no_resched(); } return 0; @@ -393,11 +385,7 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, struct die_args *args = (struct die_args *)data; int ret = NOTIFY_DONE; - /* - * Interrupts are not disabled here. We need to disable - * preemption, because kprobe_running() uses smp_processor_id(). - */ - preempt_disable(); + rcu_read_lock(); switch (val) { case DIE_BPT: if (kprobe_handler(args->regs)) @@ -415,7 +403,7 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, default: break; } - preempt_enable_no_resched(); + rcu_read_unlock(); return ret; } diff --git a/arch/sparc64/kernel/kprobes.c b/arch/sparc64/kernel/kprobes.c index b95984154db..58a815e9037 100644 --- a/arch/sparc64/kernel/kprobes.c +++ b/arch/sparc64/kernel/kprobes.c @@ -116,15 +116,11 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); if (kprobe_running()) { - /* We *are* holding lock here, so this is safe. - * Disarm the probe we just hit, and ignore it. - */ p = get_kprobe(addr); if (p) { if (kcb->kprobe_status == KPROBE_HIT_SS) { regs->tstate = ((regs->tstate & ~TSTATE_PIL) | kcb->kprobe_orig_tstate_pil); - unlock_kprobes(); goto no_kprobe; } /* We have reentered the kprobe_handler(), since @@ -144,14 +140,11 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) if (p->break_handler && p->break_handler(p, regs)) goto ss_probe; } - /* If it's not ours, can't be delete race, (we hold lock). */ goto no_kprobe; } - lock_kprobes(); p = get_kprobe(addr); if (!p) { - unlock_kprobes(); if (*(u32 *)addr != BREAKPOINT_INSTRUCTION) { /* * The breakpoint instruction was removed right @@ -296,14 +289,12 @@ static inline int post_kprobe_handler(struct pt_regs *regs) goto out; } reset_current_kprobe(); - unlock_kprobes(); out: preempt_enable_no_resched(); return 1; } -/* Interrupts disabled, kprobe_lock held. */ static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) { struct kprobe *cur = kprobe_running(); @@ -316,7 +307,6 @@ static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) resume_execution(cur, regs, kcb); reset_current_kprobe(); - unlock_kprobes(); preempt_enable_no_resched(); } return 0; @@ -331,7 +321,7 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, struct die_args *args = (struct die_args *)data; int ret = NOTIFY_DONE; - preempt_disable(); + rcu_read_lock(); switch (val) { case DIE_DEBUG: if (kprobe_handler(args->regs)) @@ -350,7 +340,7 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, default: break; } - preempt_enable(); + rcu_read_unlock(); return ret; } diff --git a/arch/x86_64/kernel/kprobes.c b/arch/x86_64/kernel/kprobes.c index 6cb40d133b7..9bef2c8dc12 100644 --- a/arch/x86_64/kernel/kprobes.c +++ b/arch/x86_64/kernel/kprobes.c @@ -34,7 +34,6 @@ #include #include #include -#include #include #include #include @@ -266,6 +265,7 @@ static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs) regs->rip = (unsigned long)p->ainsn.insn; } +/* Called with kretprobe_lock held */ void __kprobes arch_prepare_kretprobe(struct kretprobe *rp, struct pt_regs *regs) { @@ -299,15 +299,12 @@ int __kprobes kprobe_handler(struct pt_regs *regs) /* Check we're not actually recursing */ if (kprobe_running()) { - /* We *are* holding lock here, so this is safe. - Disarm the probe we just hit, and ignore it. */ p = get_kprobe(addr); if (p) { if (kcb->kprobe_status == KPROBE_HIT_SS && *p->ainsn.insn == BREAKPOINT_INSTRUCTION) { regs->eflags &= ~TF_MASK; regs->eflags |= kcb->kprobe_saved_rflags; - unlock_kprobes(); goto no_kprobe; } else if (kcb->kprobe_status == KPROBE_HIT_SSDONE) { /* TODO: Provide re-entrancy from @@ -340,14 +337,11 @@ int __kprobes kprobe_handler(struct pt_regs *regs) goto ss_probe; } } - /* If it's not ours, can't be delete race, (we hold lock). */ goto no_kprobe; } - lock_kprobes(); p = get_kprobe(addr); if (!p) { - unlock_kprobes(); if (*addr != BREAKPOINT_INSTRUCTION) { /* * The breakpoint instruction was removed right @@ -406,9 +400,10 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) struct kretprobe_instance *ri = NULL; struct hlist_head *head; struct hlist_node *node, *tmp; - unsigned long orig_ret_address = 0; + unsigned long flags, orig_ret_address = 0; unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline; + spin_lock_irqsave(&kretprobe_lock, flags); head = kretprobe_inst_table_head(current); /* @@ -448,7 +443,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) regs->rip = orig_ret_address; reset_current_kprobe(); - unlock_kprobes(); + spin_unlock_irqrestore(&kretprobe_lock, flags); preempt_enable_no_resched(); /* @@ -536,10 +531,6 @@ static void __kprobes resume_execution(struct kprobe *p, } } -/* - * Interrupts are disabled on entry as trap1 is an interrupt gate and they - * remain disabled thoroughout this function. And we hold kprobe lock. - */ int __kprobes post_kprobe_handler(struct pt_regs *regs) { struct kprobe *cur = kprobe_running(); @@ -560,8 +551,6 @@ int __kprobes post_kprobe_handler(struct pt_regs *regs) if (kcb->kprobe_status == KPROBE_REENTER) { restore_previous_kprobe(kcb); goto out; - } else { - unlock_kprobes(); } reset_current_kprobe(); out: @@ -578,7 +567,6 @@ out: return 1; } -/* Interrupts disabled, kprobe_lock held. */ int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr) { struct kprobe *cur = kprobe_running(); @@ -592,7 +580,6 @@ int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr) regs->eflags |= kcb->kprobe_old_rflags; reset_current_kprobe(); - unlock_kprobes(); preempt_enable_no_resched(); } return 0; @@ -607,7 +594,7 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, struct die_args *args = (struct die_args *)data; int ret = NOTIFY_DONE; - preempt_disable(); + rcu_read_lock(); switch (val) { case DIE_INT3: if (kprobe_handler(args->regs)) @@ -626,7 +613,7 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, default: break; } - preempt_enable(); + rcu_read_unlock(); return ret; } -- cgit v1.2.3 From d217d5450f11d8c907c0458d175b0dc999b4d06d Mon Sep 17 00:00:00 2001 From: Ananth N Mavinakayanahalli Date: Mon, 7 Nov 2005 01:00:14 -0800 Subject: [PATCH] Kprobes: preempt_disable/enable() simplification Reorganize the preempt_disable/enable calls to eliminate the extra preempt depth. Changes based on Paul McKenney's review suggestions for the kprobes RCU changeset. Signed-off-by: Ananth N Mavinakayanahalli Signed-off-by: Anil S Keshavamurthy Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/kprobes.c | 25 +++++++++++++++---------- arch/ia64/kernel/kprobes.c | 37 ++++++++++++++++++++----------------- arch/ppc64/kernel/kprobes.c | 25 +++++++++++++++---------- arch/sparc64/kernel/kprobes.c | 21 +++++++++++++-------- arch/x86_64/kernel/kprobes.c | 29 +++++++++++++++-------------- 5 files changed, 78 insertions(+), 59 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/kprobes.c b/arch/i386/kernel/kprobes.c index ad469299267..32b0c24ab9a 100644 --- a/arch/i386/kernel/kprobes.c +++ b/arch/i386/kernel/kprobes.c @@ -153,7 +153,14 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) int ret = 0; kprobe_opcode_t *addr = NULL; unsigned long *lp; - struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + struct kprobe_ctlblk *kcb; + + /* + * We don't want to be preempted for the entire + * duration of kprobe processing + */ + preempt_disable(); + kcb = get_kprobe_ctlblk(); /* Check if the application is using LDT entry for its code segment and * calculate the address by reading the base address from the LDT entry. @@ -221,11 +228,6 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) goto no_kprobe; } - /* - * This preempt_disable() matches the preempt_enable_no_resched() - * in post_kprobe_handler() - */ - preempt_disable(); set_current_kprobe(p, regs, kcb); kcb->kprobe_status = KPROBE_HIT_ACTIVE; @@ -239,6 +241,7 @@ ss_probe: return 1; no_kprobe: + preempt_enable_no_resched(); return ret; } @@ -310,8 +313,8 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) /* * By returning a non-zero value, we are telling - * kprobe_handler() that we have handled unlocking - * and re-enabling preemption + * kprobe_handler() that we don't want the post_handler + * to run (and have re-enabled preemption) */ return 1; } @@ -455,7 +458,6 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, struct die_args *args = (struct die_args *)data; int ret = NOTIFY_DONE; - rcu_read_lock(); switch (val) { case DIE_INT3: if (kprobe_handler(args->regs)) @@ -467,14 +469,16 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, break; case DIE_GPF: case DIE_PAGE_FAULT: + /* kprobe_running() needs smp_processor_id() */ + preempt_disable(); if (kprobe_running() && kprobe_fault_handler(args->regs, args->trapnr)) ret = NOTIFY_STOP; + preempt_enable(); break; default: break; } - rcu_read_unlock(); return ret; } @@ -537,6 +541,7 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) *regs = kcb->jprobe_saved_regs; memcpy((kprobe_opcode_t *) stack_addr, kcb->jprobes_stack, MIN_STACK_SIZE(stack_addr)); + preempt_enable_no_resched(); return 1; } return 0; diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c index fddbac32d44..96736a119c9 100644 --- a/arch/ia64/kernel/kprobes.c +++ b/arch/ia64/kernel/kprobes.c @@ -389,11 +389,11 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) spin_unlock_irqrestore(&kretprobe_lock, flags); preempt_enable_no_resched(); - /* - * By returning a non-zero value, we are telling - * kprobe_handler() that we have handled unlocking - * and re-enabling preemption - */ + /* + * By returning a non-zero value, we are telling + * kprobe_handler() that we don't want the post_handler + * to run (and have re-enabled preemption) + */ return 1; } @@ -604,7 +604,14 @@ static int __kprobes pre_kprobes_handler(struct die_args *args) int ret = 0; struct pt_regs *regs = args->regs; kprobe_opcode_t *addr = (kprobe_opcode_t *)instruction_pointer(regs); - struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + struct kprobe_ctlblk *kcb; + + /* + * We don't want to be preempted for the entire + * duration of kprobe processing + */ + preempt_disable(); + kcb = get_kprobe_ctlblk(); /* Handle recursion cases */ if (kprobe_running()) { @@ -659,11 +666,6 @@ static int __kprobes pre_kprobes_handler(struct die_args *args) goto no_kprobe; } - /* - * This preempt_disable() matches the preempt_enable_no_resched() - * in post_kprobes_handler() - */ - preempt_disable(); set_current_kprobe(p, kcb); kcb->kprobe_status = KPROBE_HIT_ACTIVE; @@ -681,6 +683,7 @@ ss_probe: return 1; no_kprobe: + preempt_enable_no_resched(); return ret; } @@ -716,9 +719,6 @@ static int __kprobes kprobes_fault_handler(struct pt_regs *regs, int trapnr) struct kprobe *cur = kprobe_running(); struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - if (!cur) - return 0; - if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) return 1; @@ -737,7 +737,6 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, struct die_args *args = (struct die_args *)data; int ret = NOTIFY_DONE; - rcu_read_lock(); switch(val) { case DIE_BREAK: if (pre_kprobes_handler(args)) @@ -748,12 +747,15 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, ret = NOTIFY_STOP; break; case DIE_PAGE_FAULT: - if (kprobes_fault_handler(args->regs, args->trapnr)) + /* kprobe_running() needs smp_processor_id() */ + preempt_disable(); + if (kprobe_running() && + kprobes_fault_handler(args->regs, args->trapnr)) ret = NOTIFY_STOP; + preempt_enable(); default: break; } - rcu_read_unlock(); return ret; } @@ -785,6 +787,7 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); *regs = kcb->jprobe_saved_regs; + preempt_enable_no_resched(); return 1; } diff --git a/arch/ppc64/kernel/kprobes.c b/arch/ppc64/kernel/kprobes.c index e0a25b35437..511af54e623 100644 --- a/arch/ppc64/kernel/kprobes.c +++ b/arch/ppc64/kernel/kprobes.c @@ -148,7 +148,14 @@ static inline int kprobe_handler(struct pt_regs *regs) struct kprobe *p; int ret = 0; unsigned int *addr = (unsigned int *)regs->nip; - struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + struct kprobe_ctlblk *kcb; + + /* + * We don't want to be preempted for the entire + * duration of kprobe processing + */ + preempt_disable(); + kcb = get_kprobe_ctlblk(); /* Check we're not actually recursing */ if (kprobe_running()) { @@ -207,11 +214,6 @@ static inline int kprobe_handler(struct pt_regs *regs) goto no_kprobe; } - /* - * This preempt_disable() matches the preempt_enable_no_resched() - * in post_kprobe_handler(). - */ - preempt_disable(); kcb->kprobe_status = KPROBE_HIT_ACTIVE; set_current_kprobe(p, regs, kcb); if (p->pre_handler && p->pre_handler(p, regs)) @@ -224,6 +226,7 @@ ss_probe: return 1; no_kprobe: + preempt_enable_no_resched(); return ret; } @@ -296,8 +299,8 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) /* * By returning a non-zero value, we are telling - * kprobe_handler() that we have handled unlocking - * and re-enabling preemption. + * kprobe_handler() that we don't want the post_handler + * to run (and have re-enabled preemption) */ return 1; } @@ -385,7 +388,6 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, struct die_args *args = (struct die_args *)data; int ret = NOTIFY_DONE; - rcu_read_lock(); switch (val) { case DIE_BPT: if (kprobe_handler(args->regs)) @@ -396,14 +398,16 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, ret = NOTIFY_STOP; break; case DIE_PAGE_FAULT: + /* kprobe_running() needs smp_processor_id() */ + preempt_disable(); if (kprobe_running() && kprobe_fault_handler(args->regs, args->trapnr)) ret = NOTIFY_STOP; + preempt_enable(); break; default: break; } - rcu_read_unlock(); return ret; } @@ -440,6 +444,7 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) * saved regs... */ memcpy(regs, &kcb->jprobe_saved_regs, sizeof(struct pt_regs)); + preempt_enable_no_resched(); return 1; } diff --git a/arch/sparc64/kernel/kprobes.c b/arch/sparc64/kernel/kprobes.c index 58a815e9037..96bd09b098f 100644 --- a/arch/sparc64/kernel/kprobes.c +++ b/arch/sparc64/kernel/kprobes.c @@ -113,7 +113,14 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) struct kprobe *p; void *addr = (void *) regs->tpc; int ret = 0; - struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + struct kprobe_ctlblk *kcb; + + /* + * We don't want to be preempted for the entire + * duration of kprobe processing + */ + preempt_disable(); + kcb = get_kprobe_ctlblk(); if (kprobe_running()) { p = get_kprobe(addr); @@ -159,11 +166,6 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) goto no_kprobe; } - /* - * This preempt_disable() matches the preempt_enable_no_resched() - * in post_kprobes_handler() - */ - preempt_disable(); set_current_kprobe(p, regs, kcb); kcb->kprobe_status = KPROBE_HIT_ACTIVE; if (p->pre_handler && p->pre_handler(p, regs)) @@ -175,6 +177,7 @@ ss_probe: return 1; no_kprobe: + preempt_enable_no_resched(); return ret; } @@ -321,7 +324,6 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, struct die_args *args = (struct die_args *)data; int ret = NOTIFY_DONE; - rcu_read_lock(); switch (val) { case DIE_DEBUG: if (kprobe_handler(args->regs)) @@ -333,14 +335,16 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, break; case DIE_GPF: case DIE_PAGE_FAULT: + /* kprobe_running() needs smp_processor_id() */ + preempt_disable(); if (kprobe_running() && kprobe_fault_handler(args->regs, args->trapnr)) ret = NOTIFY_STOP; + preempt_enable(); break; default: break; } - rcu_read_unlock(); return ret; } @@ -426,6 +430,7 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) &(kcb->jprobe_saved_stack), sizeof(kcb->jprobe_saved_stack)); + preempt_enable_no_resched(); return 1; } return 0; diff --git a/arch/x86_64/kernel/kprobes.c b/arch/x86_64/kernel/kprobes.c index 9bef2c8dc12..dddeb678b44 100644 --- a/arch/x86_64/kernel/kprobes.c +++ b/arch/x86_64/kernel/kprobes.c @@ -286,16 +286,19 @@ void __kprobes arch_prepare_kretprobe(struct kretprobe *rp, } } -/* - * Interrupts are disabled on entry as trap3 is an interrupt gate and they - * remain disabled thorough out this function. - */ int __kprobes kprobe_handler(struct pt_regs *regs) { struct kprobe *p; int ret = 0; kprobe_opcode_t *addr = (kprobe_opcode_t *)(regs->rip - sizeof(kprobe_opcode_t)); - struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + struct kprobe_ctlblk *kcb; + + /* + * We don't want to be preempted for the entire + * duration of kprobe processing + */ + preempt_disable(); + kcb = get_kprobe_ctlblk(); /* Check we're not actually recursing */ if (kprobe_running()) { @@ -359,11 +362,6 @@ int __kprobes kprobe_handler(struct pt_regs *regs) goto no_kprobe; } - /* - * This preempt_disable() matches the preempt_enable_no_resched() - * in post_kprobe_handler() - */ - preempt_disable(); set_current_kprobe(p, regs, kcb); kcb->kprobe_status = KPROBE_HIT_ACTIVE; @@ -377,6 +375,7 @@ ss_probe: return 1; no_kprobe: + preempt_enable_no_resched(); return ret; } @@ -448,8 +447,8 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) /* * By returning a non-zero value, we are telling - * kprobe_handler() that we have handled unlocking - * and re-enabling preemption + * kprobe_handler() that we don't want the post_handler + * to run (and have re-enabled preemption) */ return 1; } @@ -594,7 +593,6 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, struct die_args *args = (struct die_args *)data; int ret = NOTIFY_DONE; - rcu_read_lock(); switch (val) { case DIE_INT3: if (kprobe_handler(args->regs)) @@ -606,14 +604,16 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, break; case DIE_GPF: case DIE_PAGE_FAULT: + /* kprobe_running() needs smp_processor_id() */ + preempt_disable(); if (kprobe_running() && kprobe_fault_handler(args->regs, args->trapnr)) ret = NOTIFY_STOP; + preempt_enable(); break; default: break; } - rcu_read_unlock(); return ret; } @@ -675,6 +675,7 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) *regs = kcb->jprobe_saved_regs; memcpy((kprobe_opcode_t *) stack_addr, kcb->jprobes_stack, MIN_STACK_SIZE(stack_addr)); + preempt_enable_no_resched(); return 1; } return 0; -- cgit v1.2.3 From 2b0c28d7f8846f80a436093e906f5175d1fa8f55 Mon Sep 17 00:00:00 2001 From: Matt Porter Date: Mon, 7 Nov 2005 01:00:19 -0800 Subject: [PATCH] RapidIO support: ppc32 Adds PPC32 RIO support. Init code for the MPC85xx RIO ports and glue for the STx GP3 board to use it. Signed-off-by: Matt Porter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/Kconfig | 8 + arch/ppc/configs/stx_gp3_defconfig | 86 ++- arch/ppc/kernel/Makefile | 1 + arch/ppc/kernel/rio.c | 52 ++ arch/ppc/platforms/85xx/mpc85xx_ads_common.c | 10 + arch/ppc/platforms/85xx/stx_gp3.c | 14 + arch/ppc/syslib/Makefile | 1 + arch/ppc/syslib/ppc85xx_rio.c | 932 +++++++++++++++++++++++++++ arch/ppc/syslib/ppc85xx_rio.h | 21 + 9 files changed, 1091 insertions(+), 34 deletions(-) create mode 100644 arch/ppc/kernel/rio.c create mode 100644 arch/ppc/syslib/ppc85xx_rio.c create mode 100644 arch/ppc/syslib/ppc85xx_rio.h (limited to 'arch') diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index f8db33d5527..8fa51b0a32d 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -1257,6 +1257,14 @@ source "drivers/pci/Kconfig" source "drivers/pcmcia/Kconfig" +config RAPIDIO + bool "RapidIO support" if MPC8540 || MPC8560 + help + If you say Y here, the kernel will include drivers and + infrastructure code to support RapidIO interconnect devices. + +source "drivers/rapidio/Kconfig" + endmenu menu "Advanced setup" diff --git a/arch/ppc/configs/stx_gp3_defconfig b/arch/ppc/configs/stx_gp3_defconfig index 66dae836765..3fedc43e44a 100644 --- a/arch/ppc/configs/stx_gp3_defconfig +++ b/arch/ppc/configs/stx_gp3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc2 -# Wed Jan 26 14:32:58 2005 +# Linux kernel version: 2.6.12-rc4 +# Tue May 24 18:11:04 2005 # CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y @@ -11,6 +11,7 @@ CONFIG_HAVE_DEC_LOCK=y CONFIG_PPC=y CONFIG_PPC32=y CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # # Code maturity level options @@ -18,6 +19,7 @@ CONFIG_GENERIC_NVRAM=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -29,7 +31,6 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set @@ -37,6 +38,9 @@ CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -46,6 +50,7 @@ CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -69,9 +74,11 @@ CONFIG_KMOD=y CONFIG_E500=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y +# CONFIG_PHYS_64BIT is not set # CONFIG_SPE is not set CONFIG_MATH_EMULATION=y # CONFIG_CPU_FREQ is not set +# CONFIG_PM is not set CONFIG_85xx=y CONFIG_PPC_INDIRECT_PCI_BE=y @@ -96,6 +103,7 @@ CONFIG_HIGHMEM=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m # CONFIG_CMDLINE_BOOL is not set +CONFIG_ISA_DMA_API=y # # Bus options @@ -104,15 +112,15 @@ CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCI_LEGACY_PROC is not set # CONFIG_PCI_NAMES is not set +# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set - -# -# PC-card bridges -# +CONFIG_RAPIDIO=y +CONFIG_RAPIDIO_8_BIT_TRANSPORT=y +CONFIG_RAPIDIO_DISC_TIMEOUT=30 # # Advanced setup @@ -152,7 +160,7 @@ CONFIG_PARPORT=m CONFIG_PARPORT_PC=m # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set -# CONFIG_PARPORT_OTHER is not set +# CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_1284 is not set # @@ -264,7 +272,6 @@ CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set @@ -274,7 +281,6 @@ CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_IMM is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=m @@ -283,6 +289,7 @@ CONFIG_SCSI_QLA2XXX=m # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set @@ -322,7 +329,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -431,7 +437,7 @@ CONFIG_IP_NF_NAT_FTP=m # # Network testing # -# CONFIG_NET_PKTGEN is not set +CONFIG_NET_PKTGEN=y # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_HAMRADIO is not set @@ -499,6 +505,7 @@ CONFIG_GFAR_NAPI=y # Wan interfaces # # CONFIG_WAN is not set +CONFIG_RIONET=y # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set @@ -535,20 +542,6 @@ CONFIG_INPUT_JOYDEV=m CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_EVBUG is not set -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PARKBD is not set -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set - # # Input Device Drivers # @@ -566,6 +559,19 @@ CONFIG_MOUSE_PS2=y # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_PARKBD is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + # # Character devices # @@ -590,6 +596,7 @@ CONFIG_SERIAL_CPM_SCC2=y # CONFIG_SERIAL_CPM_SCC4 is not set # CONFIG_SERIAL_CPM_SMC1 is not set # CONFIG_SERIAL_CPM_SMC2 is not set +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -625,6 +632,11 @@ CONFIG_DRM=m # CONFIG_DRM_SIS is not set # CONFIG_RAW_DRIVER is not set +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + # # I2C support # @@ -648,12 +660,12 @@ CONFIG_I2C_ALGOBIT=m # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set # CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_SCx200_ACB is not set @@ -677,7 +689,9 @@ CONFIG_I2C_ALGOBIT=m # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set @@ -688,9 +702,11 @@ CONFIG_I2C_ALGOBIT=m # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set @@ -700,10 +716,12 @@ CONFIG_I2C_ALGOBIT=m # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_M41T00 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -732,7 +750,6 @@ CONFIG_I2C_ALGOBIT=m # Graphics support # # CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -752,13 +769,9 @@ CONFIG_SOUND=m # # USB support # -# CONFIG_USB is not set CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# +# CONFIG_USB is not set # # USB Gadget Support @@ -789,6 +802,10 @@ CONFIG_JBD_DEBUG=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set + +# +# XFS support +# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -859,7 +876,6 @@ CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y -# CONFIG_EXPORTFS is not set CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -942,8 +958,10 @@ CONFIG_ZLIB_INFLATE=m # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y # CONFIG_MAGIC_SYSRQ is not set +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index c610ca933a2..76a55a438f2 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_POWER4) += cpu_setup_power4.o obj-$(CONFIG_MODULES) += module.o ppc_ksyms.o obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-mapping.o obj-$(CONFIG_PCI) += pci.o +obj-$(CONFIG_RAPIDIO) += rio.o obj-$(CONFIG_KGDB) += ppc-stub.o obj-$(CONFIG_SMP) += smp.o smp-tbsync.o obj-$(CONFIG_TAU) += temp.o diff --git a/arch/ppc/kernel/rio.c b/arch/ppc/kernel/rio.c new file mode 100644 index 00000000000..29487fedfc7 --- /dev/null +++ b/arch/ppc/kernel/rio.c @@ -0,0 +1,52 @@ +/* + * RapidIO PPC32 support + * + * Copyright 2005 MontaVista Software, Inc. + * Matt Porter + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include + +#include + +/** + * platform_rio_init - Do platform specific RIO init + * + * Any platform specific initialization of RapdIO + * hardware is done here as well as registration + * of any active master ports in the system. + */ +void __attribute__ ((weak)) + platform_rio_init(void) +{ + printk(KERN_WARNING "RIO: No platform_rio_init() present\n"); +} + +/** + * ppc_rio_init - Do PPC32 RIO init + * + * Calls platform-specific RIO init code and then calls + * rio_init_mports() to initialize any master ports that + * have been registered with the RIO subsystem. + */ +static int __init ppc_rio_init(void) +{ + printk(KERN_INFO "RIO: RapidIO init\n"); + + /* Platform specific initialization */ + platform_rio_init(); + + /* Enumerate all registered ports */ + rio_init_mports(); + + return 0; +} + +subsys_initcall(ppc_rio_init); diff --git a/arch/ppc/platforms/85xx/mpc85xx_ads_common.c b/arch/ppc/platforms/85xx/mpc85xx_ads_common.c index bd3ac013675..16ad092d8a0 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_ads_common.c +++ b/arch/ppc/platforms/85xx/mpc85xx_ads_common.c @@ -45,6 +45,8 @@ #include +#include + #include #ifndef CONFIG_PCI @@ -189,3 +191,11 @@ mpc85xx_exclude_device(u_char bus, u_char devfn) } #endif /* CONFIG_PCI */ + +#ifdef CONFIG_RAPIDIO +void platform_rio_init(void) +{ + /* 512MB RIO LAW at 0xc0000000 */ + mpc85xx_rio_setup(0xc0000000, 0x20000000); +} +#endif /* CONFIG_RAPIDIO */ diff --git a/arch/ppc/platforms/85xx/stx_gp3.c b/arch/ppc/platforms/85xx/stx_gp3.c index 1e1b85f8193..15ce9d07063 100644 --- a/arch/ppc/platforms/85xx/stx_gp3.c +++ b/arch/ppc/platforms/85xx/stx_gp3.c @@ -37,6 +37,7 @@ #include #include #include +#include #include #include @@ -57,6 +58,7 @@ #include #include +#include unsigned char __res[sizeof(bd_t)]; @@ -273,6 +275,18 @@ int mpc85xx_exclude_device(u_char bus, u_char devfn) } #endif /* CONFIG_PCI */ +#ifdef CONFIG_RAPIDIO +void +platform_rio_init(void) +{ + /* + * The STx firmware configures the RapidIO Local Access Window + * at 0xc0000000 with a size of 512MB. + */ + mpc85xx_rio_setup(0xc0000000, 0x20000000); +} +#endif /* CONFIG_RAPIDIO */ + void __init platform_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7) diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index dcd168f9a7a..5bd33baac24 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -33,6 +33,7 @@ obj-$(CONFIG_PPC4xx_DMA) += ppc4xx_dma.o obj-$(CONFIG_PPC4xx_EDMA) += ppc4xx_sgdma.o ifeq ($(CONFIG_40x),y) obj-$(CONFIG_PCI) += pci_auto.o ppc405_pci.o +obj-$(CONFIG_RAPIDIO) += ppc85xx_rio.o endif endif obj-$(CONFIG_8xx) += m8xx_setup.o ppc8xx_pic.o $(wdt-mpc8xx-y) \ diff --git a/arch/ppc/syslib/ppc85xx_rio.c b/arch/ppc/syslib/ppc85xx_rio.c new file mode 100644 index 00000000000..9d09c2715e0 --- /dev/null +++ b/arch/ppc/syslib/ppc85xx_rio.c @@ -0,0 +1,932 @@ +/* + * MPC85xx RapidIO support + * + * Copyright 2005 MontaVista Software, Inc. + * Matt Porter + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define RIO_REGS_BASE (CCSRBAR + 0xc0000) +#define RIO_ATMU_REGS_OFFSET 0x10c00 +#define RIO_MSG_REGS_OFFSET 0x11000 +#define RIO_MAINT_WIN_SIZE 0x400000 +#define RIO_DBELL_WIN_SIZE 0x1000 + +#define RIO_MSG_OMR_MUI 0x00000002 +#define RIO_MSG_OSR_TE 0x00000080 +#define RIO_MSG_OSR_QOI 0x00000020 +#define RIO_MSG_OSR_QFI 0x00000010 +#define RIO_MSG_OSR_MUB 0x00000004 +#define RIO_MSG_OSR_EOMI 0x00000002 +#define RIO_MSG_OSR_QEI 0x00000001 + +#define RIO_MSG_IMR_MI 0x00000002 +#define RIO_MSG_ISR_TE 0x00000080 +#define RIO_MSG_ISR_QFI 0x00000010 +#define RIO_MSG_ISR_DIQI 0x00000001 + +#define RIO_MSG_DESC_SIZE 32 +#define RIO_MSG_BUFFER_SIZE 4096 +#define RIO_MIN_TX_RING_SIZE 2 +#define RIO_MAX_TX_RING_SIZE 2048 +#define RIO_MIN_RX_RING_SIZE 2 +#define RIO_MAX_RX_RING_SIZE 2048 + +#define DOORBELL_DMR_DI 0x00000002 +#define DOORBELL_DSR_TE 0x00000080 +#define DOORBELL_DSR_QFI 0x00000010 +#define DOORBELL_DSR_DIQI 0x00000001 +#define DOORBELL_TID_OFFSET 0x03 +#define DOORBELL_SID_OFFSET 0x05 +#define DOORBELL_INFO_OFFSET 0x06 + +#define DOORBELL_MESSAGE_SIZE 0x08 +#define DBELL_SID(x) (*(u8 *)(x + DOORBELL_SID_OFFSET)) +#define DBELL_TID(x) (*(u8 *)(x + DOORBELL_TID_OFFSET)) +#define DBELL_INF(x) (*(u16 *)(x + DOORBELL_INFO_OFFSET)) + +#define is_power_of_2(x) (((x) & ((x) - 1)) == 0) + +struct rio_atmu_regs { + u32 rowtar; + u32 pad1; + u32 rowbar; + u32 pad2; + u32 rowar; + u32 pad3[3]; +}; + +struct rio_msg_regs { + u32 omr; + u32 osr; + u32 pad1; + u32 odqdpar; + u32 pad2; + u32 osar; + u32 odpr; + u32 odatr; + u32 odcr; + u32 pad3; + u32 odqepar; + u32 pad4[13]; + u32 imr; + u32 isr; + u32 pad5; + u32 ifqdpar; + u32 pad6; + u32 ifqepar; + u32 pad7[250]; + u32 dmr; + u32 dsr; + u32 pad8; + u32 dqdpar; + u32 pad9; + u32 dqepar; + u32 pad10[26]; + u32 pwmr; + u32 pwsr; + u32 pad11; + u32 pwqbar; +}; + +struct rio_tx_desc { + u32 res1; + u32 saddr; + u32 dport; + u32 dattr; + u32 res2; + u32 res3; + u32 dwcnt; + u32 res4; +}; + +static u32 regs_win; +static struct rio_atmu_regs *atmu_regs; +static struct rio_atmu_regs *maint_atmu_regs; +static struct rio_atmu_regs *dbell_atmu_regs; +static u32 dbell_win; +static u32 maint_win; +static struct rio_msg_regs *msg_regs; + +static struct rio_dbell_ring { + void *virt; + dma_addr_t phys; +} dbell_ring; + +static struct rio_msg_tx_ring { + void *virt; + dma_addr_t phys; + void *virt_buffer[RIO_MAX_TX_RING_SIZE]; + dma_addr_t phys_buffer[RIO_MAX_TX_RING_SIZE]; + int tx_slot; + int size; +} msg_tx_ring; + +static struct rio_msg_rx_ring { + void *virt; + dma_addr_t phys; + void *virt_buffer[RIO_MAX_RX_RING_SIZE]; + int rx_slot; + int size; +} msg_rx_ring; + +/** + * mpc85xx_rio_doorbell_send - Send a MPC85xx doorbell message + * @index: ID of RapidIO interface + * @destid: Destination ID of target device + * @data: 16-bit info field of RapidIO doorbell message + * + * Sends a MPC85xx doorbell message. Returns %0 on success or + * %-EINVAL on failure. + */ +static int mpc85xx_rio_doorbell_send(int index, u16 destid, u16 data) +{ + pr_debug("mpc85xx_doorbell_send: index %d destid %4.4x data %4.4x\n", + index, destid, data); + out_be32((void *)&dbell_atmu_regs->rowtar, destid << 22); + out_be16((void *)(dbell_win), data); + + return 0; +} + +/** + * mpc85xx_local_config_read - Generate a MPC85xx local config space read + * @index: ID of RapdiIO interface + * @offset: Offset into configuration space + * @len: Length (in bytes) of the maintenance transaction + * @data: Value to be read into + * + * Generates a MPC85xx local configuration space read. Returns %0 on + * success or %-EINVAL on failure. + */ +static int mpc85xx_local_config_read(int index, u32 offset, int len, u32 * data) +{ + pr_debug("mpc85xx_local_config_read: index %d offset %8.8x\n", index, + offset); + *data = in_be32((void *)(regs_win + offset)); + + return 0; +} + +/** + * mpc85xx_local_config_write - Generate a MPC85xx local config space write + * @index: ID of RapdiIO interface + * @offset: Offset into configuration space + * @len: Length (in bytes) of the maintenance transaction + * @data: Value to be written + * + * Generates a MPC85xx local configuration space write. Returns %0 on + * success or %-EINVAL on failure. + */ +static int mpc85xx_local_config_write(int index, u32 offset, int len, u32 data) +{ + pr_debug + ("mpc85xx_local_config_write: index %d offset %8.8x data %8.8x\n", + index, offset, data); + out_be32((void *)(regs_win + offset), data); + + return 0; +} + +/** + * mpc85xx_rio_config_read - Generate a MPC85xx read maintenance transaction + * @index: ID of RapdiIO interface + * @destid: Destination ID of transaction + * @hopcount: Number of hops to target device + * @offset: Offset into configuration space + * @len: Length (in bytes) of the maintenance transaction + * @val: Location to be read into + * + * Generates a MPC85xx read maintenance transaction. Returns %0 on + * success or %-EINVAL on failure. + */ +static int +mpc85xx_rio_config_read(int index, u16 destid, u8 hopcount, u32 offset, int len, + u32 * val) +{ + u8 *data; + + pr_debug + ("mpc85xx_rio_config_read: index %d destid %d hopcount %d offset %8.8x len %d\n", + index, destid, hopcount, offset, len); + out_be32((void *)&maint_atmu_regs->rowtar, + (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9)); + + data = (u8 *) maint_win + offset; + switch (len) { + case 1: + *val = in_8((u8 *) data); + break; + case 2: + *val = in_be16((u16 *) data); + break; + default: + *val = in_be32((u32 *) data); + break; + } + + return 0; +} + +/** + * mpc85xx_rio_config_write - Generate a MPC85xx write maintenance transaction + * @index: ID of RapdiIO interface + * @destid: Destination ID of transaction + * @hopcount: Number of hops to target device + * @offset: Offset into configuration space + * @len: Length (in bytes) of the maintenance transaction + * @val: Value to be written + * + * Generates an MPC85xx write maintenance transaction. Returns %0 on + * success or %-EINVAL on failure. + */ +static int +mpc85xx_rio_config_write(int index, u16 destid, u8 hopcount, u32 offset, + int len, u32 val) +{ + u8 *data; + pr_debug + ("mpc85xx_rio_config_write: index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n", + index, destid, hopcount, offset, len, val); + out_be32((void *)&maint_atmu_regs->rowtar, + (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9)); + + data = (u8 *) maint_win + offset; + switch (len) { + case 1: + out_8((u8 *) data, val); + break; + case 2: + out_be16((u16 *) data, val); + break; + default: + out_be32((u32 *) data, val); + break; + } + + return 0; +} + +/** + * rio_hw_add_outb_message - Add message to the MPC85xx outbound message queue + * @mport: Master port with outbound message queue + * @rdev: Target of outbound message + * @mbox: Outbound mailbox + * @buffer: Message to add to outbound queue + * @len: Length of message + * + * Adds the @buffer message to the MPC85xx outbound message queue. Returns + * %0 on success or %-EINVAL on failure. + */ +int +rio_hw_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox, + void *buffer, size_t len) +{ + u32 omr; + struct rio_tx_desc *desc = + (struct rio_tx_desc *)msg_tx_ring.virt + msg_tx_ring.tx_slot; + int ret = 0; + + pr_debug + ("RIO: rio_hw_add_outb_message(): destid %4.4x mbox %d buffer %8.8x len %8.8x\n", + rdev->destid, mbox, (int)buffer, len); + + if ((len < 8) || (len > RIO_MAX_MSG_SIZE)) { + ret = -EINVAL; + goto out; + } + + /* Copy and clear rest of buffer */ + memcpy(msg_tx_ring.virt_buffer[msg_tx_ring.tx_slot], buffer, len); + if (len < (RIO_MAX_MSG_SIZE - 4)) + memset((void *)((u32) msg_tx_ring. + virt_buffer[msg_tx_ring.tx_slot] + len), 0, + RIO_MAX_MSG_SIZE - len); + + /* Set mbox field for message */ + desc->dport = mbox & 0x3; + + /* Enable EOMI interrupt, set priority, and set destid */ + desc->dattr = 0x28000000 | (rdev->destid << 2); + + /* Set transfer size aligned to next power of 2 (in double words) */ + desc->dwcnt = is_power_of_2(len) ? len : 1 << get_bitmask_order(len); + + /* Set snooping and source buffer address */ + desc->saddr = 0x00000004 | msg_tx_ring.phys_buffer[msg_tx_ring.tx_slot]; + + /* Increment enqueue pointer */ + omr = in_be32((void *)&msg_regs->omr); + out_be32((void *)&msg_regs->omr, omr | RIO_MSG_OMR_MUI); + + /* Go to next descriptor */ + if (++msg_tx_ring.tx_slot == msg_tx_ring.size) + msg_tx_ring.tx_slot = 0; + + out: + return ret; +} + +EXPORT_SYMBOL_GPL(rio_hw_add_outb_message); + +/** + * mpc85xx_rio_tx_handler - MPC85xx outbound message interrupt handler + * @irq: Linux interrupt number + * @dev_instance: Pointer to interrupt-specific data + * @regs: Register context + * + * Handles outbound message interrupts. Executes a register outbound + * mailbox event handler and acks the interrupt occurence. + */ +static irqreturn_t +mpc85xx_rio_tx_handler(int irq, void *dev_instance, struct pt_regs *regs) +{ + int osr; + struct rio_mport *port = (struct rio_mport *)dev_instance; + + osr = in_be32((void *)&msg_regs->osr); + + if (osr & RIO_MSG_OSR_TE) { + pr_info("RIO: outbound message transmission error\n"); + out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_TE); + goto out; + } + + if (osr & RIO_MSG_OSR_QOI) { + pr_info("RIO: outbound message queue overflow\n"); + out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_QOI); + goto out; + } + + if (osr & RIO_MSG_OSR_EOMI) { + u32 dqp = in_be32((void *)&msg_regs->odqdpar); + int slot = (dqp - msg_tx_ring.phys) >> 5; + port->outb_msg[0].mcback(port, -1, slot); + + /* Ack the end-of-message interrupt */ + out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_EOMI); + } + + out: + return IRQ_HANDLED; +} + +/** + * rio_open_outb_mbox - Initialize MPC85xx outbound mailbox + * @mport: Master port implementing the outbound message unit + * @mbox: Mailbox to open + * @entries: Number of entries in the outbound mailbox ring + * + * Initializes buffer ring, request the outbound message interrupt, + * and enables the outbound message unit. Returns %0 on success and + * %-EINVAL or %-ENOMEM on failure. + */ +int rio_open_outb_mbox(struct rio_mport *mport, int mbox, int entries) +{ + int i, j, rc = 0; + + if ((entries < RIO_MIN_TX_RING_SIZE) || + (entries > RIO_MAX_TX_RING_SIZE) || (!is_power_of_2(entries))) { + rc = -EINVAL; + goto out; + } + + /* Initialize shadow copy ring */ + msg_tx_ring.size = entries; + + for (i = 0; i < msg_tx_ring.size; i++) { + if (! + (msg_tx_ring.virt_buffer[i] = + dma_alloc_coherent(NULL, RIO_MSG_BUFFER_SIZE, + &msg_tx_ring.phys_buffer[i], + GFP_KERNEL))) { + rc = -ENOMEM; + for (j = 0; j < msg_tx_ring.size; j++) + if (msg_tx_ring.virt_buffer[j]) + dma_free_coherent(NULL, + RIO_MSG_BUFFER_SIZE, + msg_tx_ring. + virt_buffer[j], + msg_tx_ring. + phys_buffer[j]); + goto out; + } + } + + /* Initialize outbound message descriptor ring */ + if (!(msg_tx_ring.virt = dma_alloc_coherent(NULL, + msg_tx_ring.size * + RIO_MSG_DESC_SIZE, + &msg_tx_ring.phys, + GFP_KERNEL))) { + rc = -ENOMEM; + goto out_dma; + } + memset(msg_tx_ring.virt, 0, msg_tx_ring.size * RIO_MSG_DESC_SIZE); + msg_tx_ring.tx_slot = 0; + + /* Point dequeue/enqueue pointers at first entry in ring */ + out_be32((void *)&msg_regs->odqdpar, msg_tx_ring.phys); + out_be32((void *)&msg_regs->odqepar, msg_tx_ring.phys); + + /* Configure for snooping */ + out_be32((void *)&msg_regs->osar, 0x00000004); + + /* Clear interrupt status */ + out_be32((void *)&msg_regs->osr, 0x000000b3); + + /* Hook up outbound message handler */ + if ((rc = + request_irq(MPC85xx_IRQ_RIO_TX, mpc85xx_rio_tx_handler, 0, + "msg_tx", (void *)mport)) < 0) + goto out_irq; + + /* + * Configure outbound message unit + * Snooping + * Interrupts (all enabled, except QEIE) + * Chaining mode + * Disable + */ + out_be32((void *)&msg_regs->omr, 0x00100220); + + /* Set number of entries */ + out_be32((void *)&msg_regs->omr, + in_be32((void *)&msg_regs->omr) | + ((get_bitmask_order(entries) - 2) << 12)); + + /* Now enable the unit */ + out_be32((void *)&msg_regs->omr, in_be32((void *)&msg_regs->omr) | 0x1); + + out: + return rc; + + out_irq: + dma_free_coherent(NULL, msg_tx_ring.size * RIO_MSG_DESC_SIZE, + msg_tx_ring.virt, msg_tx_ring.phys); + + out_dma: + for (i = 0; i < msg_tx_ring.size; i++) + dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE, + msg_tx_ring.virt_buffer[i], + msg_tx_ring.phys_buffer[i]); + + return rc; +} + +/** + * rio_close_outb_mbox - Shut down MPC85xx outbound mailbox + * @mport: Master port implementing the outbound message unit + * @mbox: Mailbox to close + * + * Disables the outbound message unit, free all buffers, and + * frees the outbound message interrupt. + */ +void rio_close_outb_mbox(struct rio_mport *mport, int mbox) +{ + /* Disable inbound message unit */ + out_be32((void *)&msg_regs->omr, 0); + + /* Free ring */ + dma_free_coherent(NULL, msg_tx_ring.size * RIO_MSG_DESC_SIZE, + msg_tx_ring.virt, msg_tx_ring.phys); + + /* Free interrupt */ + free_irq(MPC85xx_IRQ_RIO_TX, (void *)mport); +} + +/** + * mpc85xx_rio_rx_handler - MPC85xx inbound message interrupt handler + * @irq: Linux interrupt number + * @dev_instance: Pointer to interrupt-specific data + * @regs: Register context + * + * Handles inbound message interrupts. Executes a registered inbound + * mailbox event handler and acks the interrupt occurence. + */ +static irqreturn_t +mpc85xx_rio_rx_handler(int irq, void *dev_instance, struct pt_regs *regs) +{ + int isr; + struct rio_mport *port = (struct rio_mport *)dev_instance; + + isr = in_be32((void *)&msg_regs->isr); + + if (isr & RIO_MSG_ISR_TE) { + pr_info("RIO: inbound message reception error\n"); + out_be32((void *)&msg_regs->isr, RIO_MSG_ISR_TE); + goto out; + } + + /* XXX Need to check/dispatch until queue empty */ + if (isr & RIO_MSG_ISR_DIQI) { + /* + * We implement *only* mailbox 0, but can receive messages + * for any mailbox/letter to that mailbox destination. So, + * make the callback with an unknown/invalid mailbox number + * argument. + */ + port->inb_msg[0].mcback(port, -1, -1); + + /* Ack the queueing interrupt */ + out_be32((void *)&msg_regs->isr, RIO_MSG_ISR_DIQI); + } + + out: + return IRQ_HANDLED; +} + +/** + * rio_open_inb_mbox - Initialize MPC85xx inbound mailbox + * @mport: Master port implementing the inbound message unit + * @mbox: Mailbox to open + * @entries: Number of entries in the inbound mailbox ring + * + * Initializes buffer ring, request the inbound message interrupt, + * and enables the inbound message unit. Returns %0 on success + * and %-EINVAL or %-ENOMEM on failure. + */ +int rio_open_inb_mbox(struct rio_mport *mport, int mbox, int entries) +{ + int i, rc = 0; + + if ((entries < RIO_MIN_RX_RING_SIZE) || + (entries > RIO_MAX_RX_RING_SIZE) || (!is_power_of_2(entries))) { + rc = -EINVAL; + goto out; + } + + /* Initialize client buffer ring */ + msg_rx_ring.size = entries; + msg_rx_ring.rx_slot = 0; + for (i = 0; i < msg_rx_ring.size; i++) + msg_rx_ring.virt_buffer[i] = NULL; + + /* Initialize inbound message ring */ + if (!(msg_rx_ring.virt = dma_alloc_coherent(NULL, + msg_rx_ring.size * + RIO_MAX_MSG_SIZE, + &msg_rx_ring.phys, + GFP_KERNEL))) { + rc = -ENOMEM; + goto out; + } + + /* Point dequeue/enqueue pointers at first entry in ring */ + out_be32((void *)&msg_regs->ifqdpar, (u32) msg_rx_ring.phys); + out_be32((void *)&msg_regs->ifqepar, (u32) msg_rx_ring.phys); + + /* Clear interrupt status */ + out_be32((void *)&msg_regs->isr, 0x00000091); + + /* Hook up inbound message handler */ + if ((rc = + request_irq(MPC85xx_IRQ_RIO_RX, mpc85xx_rio_rx_handler, 0, + "msg_rx", (void *)mport)) < 0) { + dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE, + msg_tx_ring.virt_buffer[i], + msg_tx_ring.phys_buffer[i]); + goto out; + } + + /* + * Configure inbound message unit: + * Snooping + * 4KB max message size + * Unmask all interrupt sources + * Disable + */ + out_be32((void *)&msg_regs->imr, 0x001b0060); + + /* Set number of queue entries */ + out_be32((void *)&msg_regs->imr, + in_be32((void *)&msg_regs->imr) | + ((get_bitmask_order(entries) - 2) << 12)); + + /* Now enable the unit */ + out_be32((void *)&msg_regs->imr, in_be32((void *)&msg_regs->imr) | 0x1); + + out: + return rc; +} + +/** + * rio_close_inb_mbox - Shut down MPC85xx inbound mailbox + * @mport: Master port implementing the inbound message unit + * @mbox: Mailbox to close + * + * Disables the inbound message unit, free all buffers, and + * frees the inbound message interrupt. + */ +void rio_close_inb_mbox(struct rio_mport *mport, int mbox) +{ + /* Disable inbound message unit */ + out_be32((void *)&msg_regs->imr, 0); + + /* Free ring */ + dma_free_coherent(NULL, msg_rx_ring.size * RIO_MAX_MSG_SIZE, + msg_rx_ring.virt, msg_rx_ring.phys); + + /* Free interrupt */ + free_irq(MPC85xx_IRQ_RIO_RX, (void *)mport); +} + +/** + * rio_hw_add_inb_buffer - Add buffer to the MPC85xx inbound message queue + * @mport: Master port implementing the inbound message unit + * @mbox: Inbound mailbox number + * @buf: Buffer to add to inbound queue + * + * Adds the @buf buffer to the MPC85xx inbound message queue. Returns + * %0 on success or %-EINVAL on failure. + */ +int rio_hw_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf) +{ + int rc = 0; + + pr_debug("RIO: rio_hw_add_inb_buffer(), msg_rx_ring.rx_slot %d\n", + msg_rx_ring.rx_slot); + + if (msg_rx_ring.virt_buffer[msg_rx_ring.rx_slot]) { + printk(KERN_ERR + "RIO: error adding inbound buffer %d, buffer exists\n", + msg_rx_ring.rx_slot); + rc = -EINVAL; + goto out; + } + + msg_rx_ring.virt_buffer[msg_rx_ring.rx_slot] = buf; + if (++msg_rx_ring.rx_slot == msg_rx_ring.size) + msg_rx_ring.rx_slot = 0; + + out: + return rc; +} + +EXPORT_SYMBOL_GPL(rio_hw_add_inb_buffer); + +/** + * rio_hw_get_inb_message - Fetch inbound message from the MPC85xx message unit + * @mport: Master port implementing the inbound message unit + * @mbox: Inbound mailbox number + * + * Gets the next available inbound message from the inbound message queue. + * A pointer to the message is returned on success or NULL on failure. + */ +void *rio_hw_get_inb_message(struct rio_mport *mport, int mbox) +{ + u32 imr; + u32 phys_buf, virt_buf; + void *buf = NULL; + int buf_idx; + + phys_buf = in_be32((void *)&msg_regs->ifqdpar); + + /* If no more messages, then bail out */ + if (phys_buf == in_be32((void *)&msg_regs->ifqepar)) + goto out2; + + virt_buf = (u32) msg_rx_ring.virt + (phys_buf - msg_rx_ring.phys); + buf_idx = (phys_buf - msg_rx_ring.phys) / RIO_MAX_MSG_SIZE; + buf = msg_rx_ring.virt_buffer[buf_idx]; + + if (!buf) { + printk(KERN_ERR + "RIO: inbound message copy failed, no buffers\n"); + goto out1; + } + + /* Copy max message size, caller is expected to allocate that big */ + memcpy(buf, (void *)virt_buf, RIO_MAX_MSG_SIZE); + + /* Clear the available buffer */ + msg_rx_ring.virt_buffer[buf_idx] = NULL; + + out1: + imr = in_be32((void *)&msg_regs->imr); + out_be32((void *)&msg_regs->imr, imr | RIO_MSG_IMR_MI); + + out2: + return buf; +} + +EXPORT_SYMBOL_GPL(rio_hw_get_inb_message); + +/** + * mpc85xx_rio_dbell_handler - MPC85xx doorbell interrupt handler + * @irq: Linux interrupt number + * @dev_instance: Pointer to interrupt-specific data + * @regs: Register context + * + * Handles doorbell interrupts. Parses a list of registered + * doorbell event handlers and executes a matching event handler. + */ +static irqreturn_t +mpc85xx_rio_dbell_handler(int irq, void *dev_instance, struct pt_regs *regs) +{ + int dsr; + struct rio_mport *port = (struct rio_mport *)dev_instance; + + dsr = in_be32((void *)&msg_regs->dsr); + + if (dsr & DOORBELL_DSR_TE) { + pr_info("RIO: doorbell reception error\n"); + out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_TE); + goto out; + } + + if (dsr & DOORBELL_DSR_QFI) { + pr_info("RIO: doorbell queue full\n"); + out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_QFI); + goto out; + } + + /* XXX Need to check/dispatch until queue empty */ + if (dsr & DOORBELL_DSR_DIQI) { + u32 dmsg = + (u32) dbell_ring.virt + + (in_be32((void *)&msg_regs->dqdpar) & 0xfff); + u32 dmr; + struct rio_dbell *dbell; + int found = 0; + + pr_debug + ("RIO: processing doorbell, sid %2.2x tid %2.2x info %4.4x\n", + DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg)); + + list_for_each_entry(dbell, &port->dbells, node) { + if ((dbell->res->start <= DBELL_INF(dmsg)) && + (dbell->res->end >= DBELL_INF(dmsg))) { + found = 1; + break; + } + } + if (found) { + dbell->dinb(port, DBELL_SID(dmsg), DBELL_TID(dmsg), + DBELL_INF(dmsg)); + } else { + pr_debug + ("RIO: spurious doorbell, sid %2.2x tid %2.2x info %4.4x\n", + DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg)); + } + dmr = in_be32((void *)&msg_regs->dmr); + out_be32((void *)&msg_regs->dmr, dmr | DOORBELL_DMR_DI); + out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_DIQI); + } + + out: + return IRQ_HANDLED; +} + +/** + * mpc85xx_rio_doorbell_init - MPC85xx doorbell interface init + * @mport: Master port implementing the inbound doorbell unit + * + * Initializes doorbell unit hardware and inbound DMA buffer + * ring. Called from mpc85xx_rio_setup(). Returns %0 on success + * or %-ENOMEM on failure. + */ +static int mpc85xx_rio_doorbell_init(struct rio_mport *mport) +{ + int rc = 0; + + /* Map outbound doorbell window immediately after maintenance window */ + if (!(dbell_win = + (u32) ioremap(mport->iores.start + RIO_MAINT_WIN_SIZE, + RIO_DBELL_WIN_SIZE))) { + printk(KERN_ERR + "RIO: unable to map outbound doorbell window\n"); + rc = -ENOMEM; + goto out; + } + + /* Initialize inbound doorbells */ + if (!(dbell_ring.virt = dma_alloc_coherent(NULL, + 512 * DOORBELL_MESSAGE_SIZE, + &dbell_ring.phys, + GFP_KERNEL))) { + printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n"); + rc = -ENOMEM; + iounmap((void *)dbell_win); + goto out; + } + + /* Point dequeue/enqueue pointers at first entry in ring */ + out_be32((void *)&msg_regs->dqdpar, (u32) dbell_ring.phys); + out_be32((void *)&msg_regs->dqepar, (u32) dbell_ring.phys); + + /* Clear interrupt status */ + out_be32((void *)&msg_regs->dsr, 0x00000091); + + /* Hook up doorbell handler */ + if ((rc = + request_irq(MPC85xx_IRQ_RIO_BELL, mpc85xx_rio_dbell_handler, 0, + "dbell_rx", (void *)mport) < 0)) { + iounmap((void *)dbell_win); + dma_free_coherent(NULL, 512 * DOORBELL_MESSAGE_SIZE, + dbell_ring.virt, dbell_ring.phys); + printk(KERN_ERR + "MPC85xx RIO: unable to request inbound doorbell irq"); + goto out; + } + + /* Configure doorbells for snooping, 512 entries, and enable */ + out_be32((void *)&msg_regs->dmr, 0x00108161); + + out: + return rc; +} + +static char *cmdline = NULL; + +static int mpc85xx_rio_get_hdid(int index) +{ + /* XXX Need to parse multiple entries in some format */ + if (!cmdline) + return -1; + + return simple_strtol(cmdline, NULL, 0); +} + +static int mpc85xx_rio_get_cmdline(char *s) +{ + if (!s) + return 0; + + cmdline = s; + return 1; +} + +__setup("riohdid=", mpc85xx_rio_get_cmdline); + +/** + * mpc85xx_rio_setup - Setup MPC85xx RapidIO interface + * @law_start: Starting physical address of RapidIO LAW + * @law_size: Size of RapidIO LAW + * + * Initializes MPC85xx RapidIO hardware interface, configures + * master port with system-specific info, and registers the + * master port with the RapidIO subsystem. + */ +void mpc85xx_rio_setup(int law_start, int law_size) +{ + struct rio_ops *ops; + struct rio_mport *port; + + ops = kmalloc(sizeof(struct rio_ops), GFP_KERNEL); + ops->lcread = mpc85xx_local_config_read; + ops->lcwrite = mpc85xx_local_config_write; + ops->cread = mpc85xx_rio_config_read; + ops->cwrite = mpc85xx_rio_config_write; + ops->dsend = mpc85xx_rio_doorbell_send; + + port = kmalloc(sizeof(struct rio_mport), GFP_KERNEL); + port->id = 0; + port->index = 0; + INIT_LIST_HEAD(&port->dbells); + port->iores.start = law_start; + port->iores.end = law_start + law_size; + port->iores.flags = IORESOURCE_MEM; + + rio_init_dbell_res(&port->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff); + rio_init_mbox_res(&port->riores[RIO_INB_MBOX_RESOURCE], 0, 0); + rio_init_mbox_res(&port->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0); + strcpy(port->name, "RIO0 mport"); + + port->ops = ops; + port->host_deviceid = mpc85xx_rio_get_hdid(port->id); + + rio_register_mport(port); + + regs_win = (u32) ioremap(RIO_REGS_BASE, 0x20000); + atmu_regs = (struct rio_atmu_regs *)(regs_win + RIO_ATMU_REGS_OFFSET); + maint_atmu_regs = atmu_regs + 1; + dbell_atmu_regs = atmu_regs + 2; + msg_regs = (struct rio_msg_regs *)(regs_win + RIO_MSG_REGS_OFFSET); + + /* Configure maintenance transaction window */ + out_be32((void *)&maint_atmu_regs->rowbar, 0x000c0000); + out_be32((void *)&maint_atmu_regs->rowar, 0x80077015); + + maint_win = (u32) ioremap(law_start, RIO_MAINT_WIN_SIZE); + + /* Configure outbound doorbell window */ + out_be32((void *)&dbell_atmu_regs->rowbar, 0x000c0400); + out_be32((void *)&dbell_atmu_regs->rowar, 0x8004200b); + mpc85xx_rio_doorbell_init(port); +} diff --git a/arch/ppc/syslib/ppc85xx_rio.h b/arch/ppc/syslib/ppc85xx_rio.h new file mode 100644 index 00000000000..c0827a2c3ee --- /dev/null +++ b/arch/ppc/syslib/ppc85xx_rio.h @@ -0,0 +1,21 @@ +/* + * MPC85xx RapidIO definitions + * + * Copyright 2005 MontaVista Software, Inc. + * Matt Porter + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __PPC_SYSLIB_PPC85XX_RIO_H +#define __PPC_SYSLIB_PPC85XX_RIO_H + +#include +#include + +extern void mpc85xx_rio_setup(int law_start, int law_size); + +#endif /* __PPC_SYSLIB_PPC85XX_RIO_H */ -- cgit v1.2.3 From 6978bbc097c2f665c336927a9d56ae39ef75fa56 Mon Sep 17 00:00:00 2001 From: Matt Porter Date: Mon, 7 Nov 2005 01:00:20 -0800 Subject: [PATCH] rapidio: message interface updates Updates the RIO messaging interface to pass a device instance into the event registeration and callbacks. Signed-off-by: Matt Porter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/syslib/ppc85xx_rio.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/ppc/syslib/ppc85xx_rio.c b/arch/ppc/syslib/ppc85xx_rio.c index 9d09c2715e0..297f3b54917 100644 --- a/arch/ppc/syslib/ppc85xx_rio.c +++ b/arch/ppc/syslib/ppc85xx_rio.c @@ -135,6 +135,7 @@ static struct rio_msg_tx_ring { dma_addr_t phys_buffer[RIO_MAX_TX_RING_SIZE]; int tx_slot; int size; + void *dev_id; } msg_tx_ring; static struct rio_msg_rx_ring { @@ -143,6 +144,7 @@ static struct rio_msg_rx_ring { void *virt_buffer[RIO_MAX_RX_RING_SIZE]; int rx_slot; int size; + void *dev_id; } msg_rx_ring; /** @@ -376,7 +378,7 @@ mpc85xx_rio_tx_handler(int irq, void *dev_instance, struct pt_regs *regs) if (osr & RIO_MSG_OSR_EOMI) { u32 dqp = in_be32((void *)&msg_regs->odqdpar); int slot = (dqp - msg_tx_ring.phys) >> 5; - port->outb_msg[0].mcback(port, -1, slot); + port->outb_msg[0].mcback(port, msg_tx_ring.dev_id, -1, slot); /* Ack the end-of-message interrupt */ out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_EOMI); @@ -389,6 +391,7 @@ mpc85xx_rio_tx_handler(int irq, void *dev_instance, struct pt_regs *regs) /** * rio_open_outb_mbox - Initialize MPC85xx outbound mailbox * @mport: Master port implementing the outbound message unit + * @dev_id: Device specific pointer to pass on event * @mbox: Mailbox to open * @entries: Number of entries in the outbound mailbox ring * @@ -396,7 +399,7 @@ mpc85xx_rio_tx_handler(int irq, void *dev_instance, struct pt_regs *regs) * and enables the outbound message unit. Returns %0 on success and * %-EINVAL or %-ENOMEM on failure. */ -int rio_open_outb_mbox(struct rio_mport *mport, int mbox, int entries) +int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries) { int i, j, rc = 0; @@ -407,6 +410,7 @@ int rio_open_outb_mbox(struct rio_mport *mport, int mbox, int entries) } /* Initialize shadow copy ring */ + msg_tx_ring.dev_id = dev_id; msg_tx_ring.size = entries; for (i = 0; i < msg_tx_ring.size; i++) { @@ -541,7 +545,7 @@ mpc85xx_rio_rx_handler(int irq, void *dev_instance, struct pt_regs *regs) * make the callback with an unknown/invalid mailbox number * argument. */ - port->inb_msg[0].mcback(port, -1, -1); + port->inb_msg[0].mcback(port, msg_rx_ring.dev_id, -1, -1); /* Ack the queueing interrupt */ out_be32((void *)&msg_regs->isr, RIO_MSG_ISR_DIQI); @@ -554,6 +558,7 @@ mpc85xx_rio_rx_handler(int irq, void *dev_instance, struct pt_regs *regs) /** * rio_open_inb_mbox - Initialize MPC85xx inbound mailbox * @mport: Master port implementing the inbound message unit + * @dev_id: Device specific pointer to pass on event * @mbox: Mailbox to open * @entries: Number of entries in the inbound mailbox ring * @@ -561,7 +566,7 @@ mpc85xx_rio_rx_handler(int irq, void *dev_instance, struct pt_regs *regs) * and enables the inbound message unit. Returns %0 on success * and %-EINVAL or %-ENOMEM on failure. */ -int rio_open_inb_mbox(struct rio_mport *mport, int mbox, int entries) +int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries) { int i, rc = 0; @@ -572,6 +577,7 @@ int rio_open_inb_mbox(struct rio_mport *mport, int mbox, int entries) } /* Initialize client buffer ring */ + msg_rx_ring.dev_id = dev_id; msg_rx_ring.size = entries; msg_rx_ring.rx_slot = 0; for (i = 0; i < msg_rx_ring.size; i++) @@ -777,7 +783,7 @@ mpc85xx_rio_dbell_handler(int irq, void *dev_instance, struct pt_regs *regs) } } if (found) { - dbell->dinb(port, DBELL_SID(dmsg), DBELL_TID(dmsg), + dbell->dinb(port, dbell->dev_id, DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg)); } else { pr_debug -- cgit v1.2.3 From 9e173c031a7542b1f66b6da853772e5de1804399 Mon Sep 17 00:00:00 2001 From: Nishanth Aravamudan Date: Mon, 7 Nov 2005 01:01:11 -0800 Subject: [PATCH] ia64: fix-up schedule_timeout() usage Use schedule_timeout_interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Signed-off-by: Nishanth Aravamudan Cc: "Luck, Tony" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ia64/hp/sim/simserial.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c index b42ec37be51..19ee635eeb7 100644 --- a/arch/ia64/hp/sim/simserial.c +++ b/arch/ia64/hp/sim/simserial.c @@ -642,10 +642,8 @@ static void rs_close(struct tty_struct *tty, struct file * filp) info->event = 0; info->tty = 0; if (info->blocked_open) { - if (info->close_delay) { - current->state = TASK_INTERRUPTIBLE; - schedule_timeout(info->close_delay); - } + if (info->close_delay) + schedule_timeout_interruptible(info->close_delay); wake_up_interruptible(&info->open_wait); } info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); -- cgit v1.2.3 From 28faa4298ec069d1de4f54597f963be8ef35e706 Mon Sep 17 00:00:00 2001 From: Nishanth Aravamudan Date: Mon, 7 Nov 2005 01:01:12 -0800 Subject: [PATCH] m68k: fix-up schedule_timeout() usage Use schedule_timeout_interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Signed-off-by: Nishanth Aravamudan Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/m68k/atari/time.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/m68k/atari/time.c b/arch/m68k/atari/time.c index 6df7fb60dfe..e79bbc94216 100644 --- a/arch/m68k/atari/time.c +++ b/arch/m68k/atari/time.c @@ -212,10 +212,8 @@ int atari_tt_hwclk( int op, struct rtc_time *t ) * additionally the RTC_SET bit is set to prevent an update cycle. */ - while( RTC_READ(RTC_FREQ_SELECT) & RTC_UIP ) { - current->state = TASK_INTERRUPTIBLE; - schedule_timeout(HWCLK_POLL_INTERVAL); - } + while( RTC_READ(RTC_FREQ_SELECT) & RTC_UIP ) + schedule_timeout_interruptible(HWCLK_POLL_INTERVAL); local_irq_save(flags); RTC_WRITE( RTC_CONTROL, ctrl | RTC_SET ); -- cgit v1.2.3 From 8f09f4a25a927080e1fa1331735c3d1b5664866b Mon Sep 17 00:00:00 2001 From: Nishanth Aravamudan Date: Mon, 7 Nov 2005 01:01:13 -0800 Subject: [PATCH] ppc: fix-up schedule_timeout() usage Use schedule_timeout_interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Also use human-time conversion functions instead of hard-coded HZ division to avoid rounding errors. Signed-off-by: Nishanth Aravamudan Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/4xx_io/serial_sicc.c | 17 +++++++---------- arch/ppc/8260_io/fcc_enet.c | 3 +-- 2 files changed, 8 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/ppc/4xx_io/serial_sicc.c b/arch/ppc/4xx_io/serial_sicc.c index e95c48d5757..84d96b857e4 100644 --- a/arch/ppc/4xx_io/serial_sicc.c +++ b/arch/ppc/4xx_io/serial_sicc.c @@ -1145,8 +1145,8 @@ static int set_serial_info(struct SICC_info *info, info->flags = ((state->flags & ~ASYNC_INTERNAL_FLAGS) | (info->flags & ASYNC_INTERNAL_FLAGS)); state->custom_divisor = new_serial.custom_divisor; - state->close_delay = new_serial.close_delay * HZ / 100; - state->closing_wait = new_serial.closing_wait * HZ / 100; + state->close_delay = msecs_to_jiffies(10 * new_serial.close_delay); + state->closing_wait = msecs_to_jiffies(10 * new_serial.closing_wait); info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; port->fifosize = new_serial.xmit_fifo_size; @@ -1465,10 +1465,8 @@ static void siccuart_close(struct tty_struct *tty, struct file *filp) info->event = 0; info->tty = NULL; if (info->blocked_open) { - if (info->state->close_delay) { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(info->state->close_delay); - } + if (info->state->close_delay) + schedule_timeout_interruptible(info->state->close_delay); wake_up_interruptible(&info->open_wait); } info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); @@ -1496,7 +1494,7 @@ static void siccuart_wait_until_sent(struct tty_struct *tty, int timeout) * Note: we have to use pretty tight timings here to satisfy * the NIST-PCTS. */ - char_time = (info->timeout - HZ/50) / info->port->fifosize; + char_time = (info->timeout - msecs_to_jiffies(20)) / info->port->fifosize; char_time = char_time / 5; if (char_time == 0) char_time = 1; @@ -1521,8 +1519,7 @@ static void siccuart_wait_until_sent(struct tty_struct *tty, int timeout) tty->index, jiffies, expire, char_time); while ((readb(info->port->uart_base + BL_SICC_LSR) & _LSR_TX_ALL) != _LSR_TX_ALL) { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(char_time); + schedule_timeout_interruptible(char_time); if (signal_pending(current)) break; if (timeout && time_after(jiffies, expire)) @@ -1773,7 +1770,7 @@ int __init siccuart_init(void) for (i = 0; i < SERIAL_SICC_NR; i++) { struct SICC_state *state = sicc_state + i; state->line = i; - state->close_delay = 5 * HZ / 10; + state->close_delay = msecs_to_jiffies(500); state->closing_wait = 30 * HZ; spin_lock_init(&state->sicc_lock); } diff --git a/arch/ppc/8260_io/fcc_enet.c b/arch/ppc/8260_io/fcc_enet.c index 2086c6ad114..4edeede9ccf 100644 --- a/arch/ppc/8260_io/fcc_enet.c +++ b/arch/ppc/8260_io/fcc_enet.c @@ -1309,8 +1309,7 @@ static void mii_dm9161_wait(uint mii_reg, struct net_device *dev) /* Davicom takes a bit to come up after a reset, * so wait here for a bit */ - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(timeout); + schedule_timeout_uninterruptible(timeout); } static phy_info_t phy_info_dm9161 = { -- cgit v1.2.3 From bc874d174b224c016adac85fc9dd6da1161ffc57 Mon Sep 17 00:00:00 2001 From: Nishanth Aravamudan Date: Mon, 7 Nov 2005 01:01:14 -0800 Subject: [PATCH] um: fix-up schedule_timeout() usage Use schedule_timeout_interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Signed-off-by: Nishanth Aravamudan Acked-by: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/random.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/um/drivers/random.c b/arch/um/drivers/random.c index f9e22198e01..ba471f5864a 100644 --- a/arch/um/drivers/random.c +++ b/arch/um/drivers/random.c @@ -58,10 +58,8 @@ static ssize_t rng_dev_read (struct file *filp, char __user *buf, size_t size, if (filp->f_flags & O_NONBLOCK) return ret ? : -EAGAIN; - if(need_resched()){ - current->state = TASK_INTERRUPTIBLE; - schedule_timeout(1); - } + if(need_resched()) + schedule_timeout_interruptible(1); } else return n; if (signal_pending (current)) -- cgit v1.2.3 From b2325fe1b7e5654fac9e9419423aa2c58a3dbd83 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Mon, 7 Nov 2005 01:01:35 -0800 Subject: [PATCH] kfree cleanup: arch This is the arch/ part of the big kfree cleanup patch. Remove pointless checks for NULL prior to calling kfree() in arch/. Signed-off-by: Jesper Juhl Acked-by: Grant Grundler Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/arm/mach-integrator/impd1.c | 3 +-- arch/cris/arch-v32/drivers/cryptocop.c | 14 +++++++------- arch/ia64/kernel/perfmon.c | 2 +- arch/powerpc/platforms/pseries/reconfig.c | 6 ++---- arch/ppc/8xx_io/cs4218_tdm.c | 3 +-- arch/ppc/syslib/prom.c | 6 ++---- arch/ppc64/kernel/lparcfg.c | 4 +--- arch/ppc64/kernel/scanlog.c | 3 +-- arch/s390/mm/extmem.c | 8 ++++---- arch/sparc64/kernel/us2e_cpufreq.c | 7 ++----- arch/sparc64/kernel/us3_cpufreq.c | 7 ++----- arch/um/kernel/sigio_user.c | 2 +- 12 files changed, 25 insertions(+), 40 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index a1b153d1626..a4bafee77a0 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -420,8 +420,7 @@ static int impd1_probe(struct lm_device *dev) free_impd1: if (impd1 && impd1->base) iounmap(impd1->base); - if (impd1) - kfree(impd1); + kfree(impd1); release_lm: release_mem_region(dev->resource.start, SZ_4K); return ret; diff --git a/arch/cris/arch-v32/drivers/cryptocop.c b/arch/cris/arch-v32/drivers/cryptocop.c index ca72076c630..501fa52d8d3 100644 --- a/arch/cris/arch-v32/drivers/cryptocop.c +++ b/arch/cris/arch-v32/drivers/cryptocop.c @@ -277,7 +277,7 @@ struct file_operations cryptocop_fops = { static void free_cdesc(struct cryptocop_dma_desc *cdesc) { DEBUG(printk("free_cdesc: cdesc 0x%p, from_pool=%d\n", cdesc, cdesc->from_pool)); - if (cdesc->free_buf) kfree(cdesc->free_buf); + kfree(cdesc->free_buf); if (cdesc->from_pool) { unsigned long int flags; @@ -2950,15 +2950,15 @@ static int cryptocop_ioctl_process(struct inode *inode, struct file *filp, unsig put_page(outpages[i]); } - if (digest_result) kfree(digest_result); - if (inpages) kfree(inpages); - if (outpages) kfree(outpages); + kfree(digest_result); + kfree(inpages); + kfree(outpages); if (cop){ - if (cop->tfrm_op.indata) kfree(cop->tfrm_op.indata); - if (cop->tfrm_op.outdata) kfree(cop->tfrm_op.outdata); + kfree(cop->tfrm_op.indata); + kfree(cop->tfrm_op.outdata); kfree(cop); } - if (jc) kfree(jc); + kfree(jc); DEBUG(print_lock_status()); diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index f7dfc107cb7..410d4804fa6 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -4940,7 +4940,7 @@ abort_locked: if (call_made && PFM_CMD_RW_ARG(cmd) && copy_to_user(arg, args_k, base_sz*count)) ret = -EFAULT; error_args: - if (args_k) kfree(args_k); + kfree(args_k); DPRINT(("cmd=%s ret=%ld\n", PFM_CMD_NAME(cmd), ret)); diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c index 58c61219d08..d7d40033945 100644 --- a/arch/powerpc/platforms/pseries/reconfig.c +++ b/arch/powerpc/platforms/pseries/reconfig.c @@ -286,10 +286,8 @@ static struct property *new_property(const char *name, const int length, return new; cleanup: - if (new->name) - kfree(new->name); - if (new->value) - kfree(new->value); + kfree(new->name); + kfree(new->value); kfree(new); return NULL; } diff --git a/arch/ppc/8xx_io/cs4218_tdm.c b/arch/ppc/8xx_io/cs4218_tdm.c index 532caa388dc..49eb2a7e65c 100644 --- a/arch/ppc/8xx_io/cs4218_tdm.c +++ b/arch/ppc/8xx_io/cs4218_tdm.c @@ -1013,8 +1013,7 @@ static void CS_IrqCleanup(void) */ cpm_free_handler(CPMVEC_SMC2); - if (beep_buf) - kfree(beep_buf); + kfree(beep_buf); kd_mksound = orig_mksound; } #endif /* MODULE */ diff --git a/arch/ppc/syslib/prom.c b/arch/ppc/syslib/prom.c index 278da6ee62e..1b9aa0d6a92 100644 --- a/arch/ppc/syslib/prom.c +++ b/arch/ppc/syslib/prom.c @@ -1335,10 +1335,8 @@ release_OF_resource(struct device_node* node, int index) if (!res) return -ENODEV; - if (res->name) { - kfree(res->name); - res->name = NULL; - } + kfree(res->name); + res->name = NULL; release_resource(res); kfree(res); diff --git a/arch/ppc64/kernel/lparcfg.c b/arch/ppc64/kernel/lparcfg.c index e86155770bb..3e7b2f28ec8 100644 --- a/arch/ppc64/kernel/lparcfg.c +++ b/arch/ppc64/kernel/lparcfg.c @@ -599,9 +599,7 @@ int __init lparcfg_init(void) void __exit lparcfg_cleanup(void) { if (proc_ppc64_lparcfg) { - if (proc_ppc64_lparcfg->data) { - kfree(proc_ppc64_lparcfg->data); - } + kfree(proc_ppc64_lparcfg->data); remove_proc_entry("lparcfg", proc_ppc64_lparcfg->parent); } } diff --git a/arch/ppc64/kernel/scanlog.c b/arch/ppc64/kernel/scanlog.c index 215bf890030..2edc947f7c4 100644 --- a/arch/ppc64/kernel/scanlog.c +++ b/arch/ppc64/kernel/scanlog.c @@ -225,8 +225,7 @@ int __init scanlog_init(void) void __exit scanlog_cleanup(void) { if (proc_ppc64_scan_log_dump) { - if (proc_ppc64_scan_log_dump->data) - kfree(proc_ppc64_scan_log_dump->data); + kfree(proc_ppc64_scan_log_dump->data); remove_proc_entry("scan-log-dump", proc_ppc64_scan_log_dump->parent); } } diff --git a/arch/s390/mm/extmem.c b/arch/s390/mm/extmem.c index c5348108ca3..506a33b51e4 100644 --- a/arch/s390/mm/extmem.c +++ b/arch/s390/mm/extmem.c @@ -234,8 +234,8 @@ query_segment_type (struct dcss_segment *seg) rc = 0; out_free: - if (qin) kfree(qin); - if (qout) kfree(qout); + kfree(qin); + kfree(qout); return rc; } @@ -394,7 +394,7 @@ __segment_load (char *name, int do_nonshared, unsigned long *addr, unsigned long segtype_string[seg->vm_segtype]); goto out; out_free: - kfree (seg); + kfree(seg); out: return rc; } @@ -505,7 +505,7 @@ segment_modify_shared (char *name, int do_nonshared) list_del(&seg->list); dcss_diag(DCSS_PURGESEG, seg->dcss_name, &dummy, &dummy); - kfree (seg); + kfree(seg); out_unlock: spin_unlock(&dcss_lock); return rc; diff --git a/arch/sparc64/kernel/us2e_cpufreq.c b/arch/sparc64/kernel/us2e_cpufreq.c index 686e526bec0..b35dc8dc995 100644 --- a/arch/sparc64/kernel/us2e_cpufreq.c +++ b/arch/sparc64/kernel/us2e_cpufreq.c @@ -388,10 +388,8 @@ err_out: kfree(driver); cpufreq_us2e_driver = NULL; } - if (us2e_freq_table) { - kfree(us2e_freq_table); - us2e_freq_table = NULL; - } + kfree(us2e_freq_table); + us2e_freq_table = NULL; return ret; } @@ -402,7 +400,6 @@ static void __exit us2e_freq_exit(void) { if (cpufreq_us2e_driver) { cpufreq_unregister_driver(cpufreq_us2e_driver); - kfree(cpufreq_us2e_driver); cpufreq_us2e_driver = NULL; kfree(us2e_freq_table); diff --git a/arch/sparc64/kernel/us3_cpufreq.c b/arch/sparc64/kernel/us3_cpufreq.c index 0340041f614..6d1f9a3c464 100644 --- a/arch/sparc64/kernel/us3_cpufreq.c +++ b/arch/sparc64/kernel/us3_cpufreq.c @@ -249,10 +249,8 @@ err_out: kfree(driver); cpufreq_us3_driver = NULL; } - if (us3_freq_table) { - kfree(us3_freq_table); - us3_freq_table = NULL; - } + kfree(us3_freq_table); + us3_freq_table = NULL; return ret; } @@ -263,7 +261,6 @@ static void __exit us3_freq_exit(void) { if (cpufreq_us3_driver) { cpufreq_unregister_driver(cpufreq_us3_driver); - kfree(cpufreq_us3_driver); cpufreq_us3_driver = NULL; kfree(us3_freq_table); diff --git a/arch/um/kernel/sigio_user.c b/arch/um/kernel/sigio_user.c index 3fbfd956bfe..48b1f644b9a 100644 --- a/arch/um/kernel/sigio_user.c +++ b/arch/um/kernel/sigio_user.c @@ -224,7 +224,7 @@ static int need_poll(int n) next_poll.used = n; return(0); } - if(next_poll.poll != NULL) kfree(next_poll.poll); + kfree(next_poll.poll); next_poll.poll = um_kmalloc_atomic(n * sizeof(struct pollfd)); if(next_poll.poll == NULL){ printk("need_poll : failed to allocate new pollfds\n"); -- cgit v1.2.3 From 5fed0578be842dd7d24e5240a75b02bbc748501f Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 7 Nov 2005 01:01:46 -0800 Subject: [PATCH] unexport phys_proc_id and cpu_core_id EXPORT_SYMBOL's for phys_proc_id and cpu_core_id were added this year but never used. Signed-off-by: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/smpboot.c | 2 -- arch/x86_64/kernel/smpboot.c | 2 -- 2 files changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index e6488ffc1f7..47ec76794d0 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -68,11 +68,9 @@ EXPORT_SYMBOL(smp_num_siblings); /* Package ID of each logical CPU */ int phys_proc_id[NR_CPUS] __read_mostly = {[0 ... NR_CPUS-1] = BAD_APICID}; -EXPORT_SYMBOL(phys_proc_id); /* Core ID of each logical CPU */ int cpu_core_id[NR_CPUS] __read_mostly = {[0 ... NR_CPUS-1] = BAD_APICID}; -EXPORT_SYMBOL(cpu_core_id); cpumask_t cpu_sibling_map[NR_CPUS] __read_mostly; EXPORT_SYMBOL(cpu_sibling_map); diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c index 658a81b33f3..4b5b088ec10 100644 --- a/arch/x86_64/kernel/smpboot.c +++ b/arch/x86_64/kernel/smpboot.c @@ -65,8 +65,6 @@ int smp_num_siblings = 1; /* Package ID of each logical CPU */ u8 phys_proc_id[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = BAD_APICID }; u8 cpu_core_id[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = BAD_APICID }; -EXPORT_SYMBOL(phys_proc_id); -EXPORT_SYMBOL(cpu_core_id); /* Bitmask of currently online CPUs */ cpumask_t cpu_online_map __read_mostly; -- cgit v1.2.3 From 54b03d133b63223e3c358f882a935d9a244ed852 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Mon, 7 Nov 2005 14:09:50 +1000 Subject: [PATCH] m68knommu: add ColdFire 5208 setup support Add setup support for the new Freescale 5208 ColdFire processor. (Also fixed a little typo in there, "UNKOWN" -> "UNKNOWN"). Patch originally from Matt Waddel (from code originally written by Mike Lavender). Signed-off-by: Greg Ungerer Signed-off-by: Linus Torvalds --- arch/m68knommu/kernel/setup.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/m68knommu/kernel/setup.c b/arch/m68knommu/kernel/setup.c index a220345e974..abb80fa2b94 100644 --- a/arch/m68knommu/kernel/setup.c +++ b/arch/m68knommu/kernel/setup.c @@ -107,6 +107,9 @@ void (*mach_power_off)( void ) = NULL; #if defined(CONFIG_M5206e) #define CPU "COLDFIRE(m5206e)" #endif +#if defined(CONFIG_M520x) + #define CPU "COLDFIRE(m520x)" +#endif #if defined(CONFIG_M523x) #define CPU "COLDFIRE(m523x)" #endif @@ -132,7 +135,7 @@ void (*mach_power_off)( void ) = NULL; #define CPU "COLDFIRE(m5407)" #endif #ifndef CPU - #define CPU "UNKOWN" + #define CPU "UNKNOWN" #endif /* (es) */ -- cgit v1.2.3 From 9c899990ba94d5d6df25ef868aa7d5249653868c Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Mon, 7 Nov 2005 14:09:50 +1000 Subject: [PATCH] m68knommu: add 5208 ColdFire platform Makefile Add Freescale 5208 ColdFire platform Makefile. Patch originally from Matt Waddel (from code originally written by Mike Lavender). Signed-off-by: Greg Ungerer Signed-off-by: Linus Torvalds --- arch/m68knommu/platform/520x/Makefile | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) create mode 100644 arch/m68knommu/platform/520x/Makefile (limited to 'arch') diff --git a/arch/m68knommu/platform/520x/Makefile b/arch/m68knommu/platform/520x/Makefile new file mode 100644 index 00000000000..e861b05106b --- /dev/null +++ b/arch/m68knommu/platform/520x/Makefile @@ -0,0 +1,19 @@ +# +# Makefile for the M5208 specific file. +# + +# +# If you want to play with the HW breakpoints then you will +# need to add define this, which will give you a stack backtrace +# on the console port whenever a DBG interrupt occurs. You have to +# set up you HW breakpoints to trigger a DBG interrupt: +# +# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT +# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# + +ifdef CONFIG_FULLDEBUG +AFLAGS += -DDEBUGGER_COMPATIBLE_CACHE=1 +endif + +obj-y := config.o -- cgit v1.2.3 From 3aec6fe2a24067ffeb2e7641bd9dd18e41654842 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Mon, 7 Nov 2005 14:09:50 +1000 Subject: [PATCH] m68knommu: use the ColdFire PIT timer for new 5208 The Freescale 5208 ColdFire uses the common PIT timer code for its internal timer. Build it when configured for the 5208 processor. Add support for the internal register map of the 5208 ColdFire fmaily. Patch originally from Matt Waddel (from code originally written by Mike Lavender). Signed-off-by: Greg Ungerer Signed-off-by: Linus Torvalds --- arch/m68knommu/platform/5307/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/m68knommu/platform/5307/Makefile b/arch/m68knommu/platform/5307/Makefile index 6fe5a2b8fb0..8d1619dc1ea 100644 --- a/arch/m68knommu/platform/5307/Makefile +++ b/arch/m68knommu/platform/5307/Makefile @@ -19,6 +19,7 @@ endif obj-$(CONFIG_COLDFIRE) += entry.o vectors.o ints.o obj-$(CONFIG_M5206) += timers.o obj-$(CONFIG_M5206e) += timers.o +obj-$(CONFIG_M520x) += pit.o obj-$(CONFIG_M523x) += pit.o obj-$(CONFIG_M5249) += timers.o obj-$(CONFIG_M527x) += pit.o -- cgit v1.2.3 From 9ed8a0d6c80bce78c703c85fa2f15db277fde933 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Mon, 7 Nov 2005 14:09:50 +1000 Subject: [PATCH] m68knommu: add ColdFire 5208 and M5208EVB build support Add build support for the new Freescale 5208 ColdFire processor, and its M5208EVB eval board. Patch originally from Matt Waddel. Signed-off-by: Greg Ungerer Signed-off-by: Linus Torvalds --- arch/m68knommu/Makefile | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/m68knommu/Makefile b/arch/m68knommu/Makefile index b8fdf191b8f..b6b5c14e55f 100644 --- a/arch/m68knommu/Makefile +++ b/arch/m68knommu/Makefile @@ -14,6 +14,7 @@ platform-$(CONFIG_M68VZ328) := 68VZ328 platform-$(CONFIG_M68360) := 68360 platform-$(CONFIG_M5206) := 5206 platform-$(CONFIG_M5206e) := 5206e +platform-$(CONFIG_M520x) := 520x platform-$(CONFIG_M523x) := 523x platform-$(CONFIG_M5249) := 5249 platform-$(CONFIG_M527x) := 527x @@ -29,7 +30,7 @@ board-$(CONFIG_UCDIMM) := ucdimm board-$(CONFIG_UCQUICC) := uCquicc board-$(CONFIG_DRAGEN2) := de2 board-$(CONFIG_ARNEWSH) := ARNEWSH -board-$(CONFIG_MOTOROLA) := MOTOROLA +board-$(CONFIG_FREESCALE) := FREESCALE board-$(CONFIG_M5235EVB) := M5235EVB board-$(CONFIG_M5271EVB) := M5271EVB board-$(CONFIG_M5275EVB) := M5275EVB @@ -41,6 +42,7 @@ board-$(CONFIG_SECUREEDGEMP3) := MP3 board-$(CONFIG_CLEOPATRA) := CLEOPATRA board-$(CONFIG_senTec) := senTec board-$(CONFIG_SNEHA) := SNEHA +board-$(CONFIG_M5208EVB) := M5208EVB board-$(CONFIG_MOD5272) := MOD5272 BOARD := $(board-y) @@ -56,6 +58,7 @@ MODEL := $(model-y) # cpuclass-$(CONFIG_M5206) := 5307 cpuclass-$(CONFIG_M5206e) := 5307 +cpuclass-$(CONFIG_M520x) := 5307 cpuclass-$(CONFIG_M523x) := 5307 cpuclass-$(CONFIG_M5249) := 5307 cpuclass-$(CONFIG_M527x) := 5307 @@ -80,6 +83,7 @@ export PLATFORM BOARD MODEL CPUCLASS # cflags-$(CONFIG_M5206) := -m5200 -Wa,-S -Wa,-m5200 cflags-$(CONFIG_M5206e) := -m5200 -Wa,-S -Wa,-m5200 +cflags-$(CONFIG_M520x) := -m5307 -Wa,-S -Wa,-m5307 cflags-$(CONFIG_M523x) := -m5307 -Wa,-S -Wa,-m5307 cflags-$(CONFIG_M5249) := -m5200 -Wa,-S -Wa,-m5200 cflags-$(CONFIG_M527x) := -m5307 -Wa,-S -Wa,-m5307 @@ -95,7 +99,6 @@ cflags-$(CONFIG_M68360) := -m68332 AFLAGS += $(cflags-y) CFLAGS += $(cflags-y) -CFLAGS += -fno-builtin CFLAGS += -O1 -g CFLAGS += -D__linux__ CFLAGS += -DUTS_SYSNAME=\"uClinux\" -- cgit v1.2.3 From 88a605b02449852213a46f8a8ab760cfc5b9b7c8 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Mon, 7 Nov 2005 14:09:50 +1000 Subject: [PATCH] m68knommu: platform config code for 5208 ColdFire Platform configuration code for the Freescale 5208 ColdFire processor. Patch originally from Matt Waddel (from code originally written by Mike Lavender). Signed-off-by: Greg Ungerer Signed-off-by: Linus Torvalds --- arch/m68knommu/platform/520x/config.c | 65 +++++++++++++++++++++++++++++++++++ 1 file changed, 65 insertions(+) create mode 100644 arch/m68knommu/platform/520x/config.c (limited to 'arch') diff --git a/arch/m68knommu/platform/520x/config.c b/arch/m68knommu/platform/520x/config.c new file mode 100644 index 00000000000..71dea2e0f45 --- /dev/null +++ b/arch/m68knommu/platform/520x/config.c @@ -0,0 +1,65 @@ +/***************************************************************************/ + +/* + * linux/arch/m68knommu/platform/520x/config.c + * + * Copyright (C) 2005, Freescale (www.freescale.com) + * Copyright (C) 2005, Intec Automation (mike@steroidmicros.com) + * Copyright (C) 1999-2003, Greg Ungerer (gerg@snapgear.com) + * Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com) + */ + +/***************************************************************************/ + +#include +#include +#include +#include +#include + +/***************************************************************************/ + +/* + * DMA channel base address table. + */ +unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS]; +unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS]; + +/***************************************************************************/ + +void coldfire_pit_tick(void); +void coldfire_pit_init(irqreturn_t (*handler)(int, void *, struct pt_regs *)); +unsigned long coldfire_pit_offset(void); +void coldfire_trap_init(void); +void coldfire_reset(void); + +/***************************************************************************/ + +/* + * Program the vector to be an auto-vectored. + */ + +void mcf_autovector(unsigned int vec) +{ + /* Everything is auto-vectored on the 520x devices */ +} + +/***************************************************************************/ + +void config_BSP(char *commandp, int size) +{ +#ifdef CONFIG_BOOTPARAM + strncpy(commandp, CONFIG_BOOTPARAM_STRING, size); + commandp[size-1] = 0; +#else + memset(commandp, 0, size); +#endif + + mach_sched_init = coldfire_pit_init; + mach_tick = coldfire_pit_tick; + mach_gettimeoffset = coldfire_pit_offset; + mach_trap_init = coldfire_trap_init; + mach_reset = coldfire_reset; +} + +/***************************************************************************/ -- cgit v1.2.3 From f15bf19b49854c984c27209bd4ade31a9c84f4de Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Mon, 7 Nov 2005 14:09:50 +1000 Subject: [PATCH] m68knommu: modify the ColdFire PIT timer for new 5208 Modified common ColdFire PIT timer code to support the 5208 as well. It uses a different set of mask and interrupt bits than other ColdFire processors. The defines for these bits have been moved in header files and set appropriately for the different processor varients. Patch originally from Matt Waddel. Signed-off-by: Greg Ungerer Signed-off-by: Linus Torvalds --- arch/m68knommu/platform/5307/pit.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/m68knommu/platform/5307/pit.c b/arch/m68knommu/platform/5307/pit.c index a9b2c2e7e28..323f2677e49 100644 --- a/arch/m68knommu/platform/5307/pit.c +++ b/arch/m68knommu/platform/5307/pit.c @@ -3,7 +3,7 @@ /* * pit.c -- Motorola ColdFire PIT timer. Currently this type of * hardware timer only exists in the Motorola ColdFire - * 5270/5271 and 5282 CPUs. + * 5270/5271, 5282 and other CPUs. * * Copyright (C) 1999-2004, Greg Ungerer (gerg@snapgear.com) * Copyright (C) 2001-2004, SnapGear Inc. (www.snapgear.com) @@ -47,10 +47,10 @@ void coldfire_pit_init(irqreturn_t (*handler)(int, void *, struct pt_regs *)) icrp = (volatile unsigned char *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + MCFINT_PIT1); - *icrp = 0x2b; /* PIT1 with level 5, priority 3 */ + *icrp = ICR_INTRCONF; - imrp = (volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH); - *imrp &= ~(1 << (MCFINT_PIT1 - 32)); + imrp = (volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFPIT_IMR); + *imrp &= ~MCFPIT_IMR_IBIT; /* Set up PIT timer 1 as poll clock */ tp = (volatile struct mcfpit *) (MCF_IPSBAR + MCFPIT_BASE1); @@ -70,7 +70,7 @@ unsigned long coldfire_pit_offset(void) unsigned long pmr, pcntr, offset; tp = (volatile struct mcfpit *) (MCF_IPSBAR + MCFPIT_BASE1); - ipr = (volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IPRH); + ipr = (volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFPIT_IMR); pmr = *(&tp->pmr); pcntr = *(&tp->pcntr); @@ -80,7 +80,7 @@ unsigned long coldfire_pit_offset(void) * timer interupt is pending, then add on a ticks worth of time. */ offset = ((pmr - pcntr) * (1000000 / HZ)) / pmr; - if ((offset < (1000000 / HZ / 2)) && (*ipr & (1 << (MCFINT_PIT1 - 32)))) + if ((offset < (1000000 / HZ / 2)) && (*ipr & MCFPIT_IMR_IBIT)) offset += 1000000 / HZ; return offset; } -- cgit v1.2.3 From 5b3d98bb7f2842551bf3dc76ade09826d70a1cbe Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Mon, 7 Nov 2005 14:09:50 +1000 Subject: [PATCH] m68knommu: handle non base address 0 memory of M5208EVB board The Freescale M5208EVB ColdFire eval board is one of the few that doesn't have its DRAM based at address 0. Handle this special case in the common ColdFire startup code. Patch originally from Matt Waddel. Signed-off-by: Greg Ungerer Signed-off-by: Linus Torvalds --- arch/m68knommu/platform/5307/head.S | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/m68knommu/platform/5307/head.S b/arch/m68knommu/platform/5307/head.S index 7f4ba837901..c30c462b99b 100644 --- a/arch/m68knommu/platform/5307/head.S +++ b/arch/m68knommu/platform/5307/head.S @@ -113,6 +113,9 @@ #define MEM_BASE 0x02000000 #define VBR_BASE 0x20000000 /* vectors in SRAM */ #endif +#if defined(CONFIG_M5208EVB) +#define MEM_BASE 0x40000000 +#endif #ifndef MEM_BASE #define MEM_BASE 0x00000000 /* memory base at address 0 */ -- cgit v1.2.3 From 124df2df0c905b8762cd860a0e3fc9201fba8777 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Mon, 7 Nov 2005 14:09:50 +1000 Subject: [PATCH] m68knommu: align param section and add 5208EVB linker support Align the param section. It can end up starting on an unalingned boundary depending on the size of ksymtab_strings. If it is unaligned things like modules will fail to load with unaligned access traps. Add linker scipt support for the M5208EVB board. Patch originally from Matt Waddel. Signed-off-by: Greg Ungerer Signed-off-by: Linus Torvalds --- arch/m68knommu/kernel/vmlinux.lds.S | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S index 47f06787190..0eab92ca4b9 100644 --- a/arch/m68knommu/kernel/vmlinux.lds.S +++ b/arch/m68knommu/kernel/vmlinux.lds.S @@ -124,6 +124,14 @@ #define RAM_LENGTH 0x3e0000 #endif +/* + * The Freescale 5208EVB board has 32MB of RAM. + */ +#if defined(CONFIG_M5208EVB) +#define RAM_START 0x40020000 +#define RAM_LENGTH 0x01e00000 +#endif + /* * The senTec COBRA5272 board has nearly the same memory layout as * the M5272C3. We assume 16MiB ram. @@ -275,6 +283,7 @@ SECTIONS { *(__ksymtab_strings) /* Built-in module parameters */ + . = ALIGN(4) ; __start___param = .; *(__param) __stop___param = .; -- cgit v1.2.3 From 4e51f674588009163d70a650bf7bc2a2e914ef89 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Mon, 7 Nov 2005 14:09:50 +1000 Subject: [PATCH] m68knommu: add ColdFire 5208 configure support Added support for the new Freescale 5208 ColdFire processor. Also changed name "Motorola" to new company name "Freescale". Signed-off-by: Greg Ungerer Signed-off-by: Linus Torvalds --- arch/m68knommu/Kconfig | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig index 8520df9cee6..b96498120fe 100644 --- a/arch/m68knommu/Kconfig +++ b/arch/m68knommu/Kconfig @@ -71,6 +71,11 @@ config M5206e help Motorola ColdFire 5206e processor support. +config M520x + bool "MCF520x" + help + Freescale Coldfire 5207/5208 processor support. + config M523x bool "MCF523x" help @@ -120,7 +125,7 @@ config M527x config COLDFIRE bool - depends on (M5206 || M5206e || M523x || M5249 || M527x || M5272 || M528x || M5307 || M5407) + depends on (M5206 || M5206e || M520x || M523x || M5249 || M527x || M5272 || M528x || M5307 || M5407) default y choice @@ -322,6 +327,12 @@ config ELITE help Support for the Motorola M5206eLITE board. +config M5208EVB + bool "Freescale M5208EVB board support" + depends on M520x + help + Support for the Freescale Coldfire M5208EVB. + config M5235EVB bool "Freescale M5235EVB support" depends on M523x @@ -465,10 +476,10 @@ config ARNEWSH default y depends on (ARN5206 || ARN5307) -config MOTOROLA +config FREESCALE bool default y - depends on (M5206eC3 || M5235EVB || M5249C3 || M5271EVB || M5272C3 || M5275EVB || M5282EVB || M5307C3 || M5407C3) + depends on (M5206eC3 || M5208EVB || M5235EVB || M5249C3 || M5271EVB || M5272C3 || M5275EVB || M5282EVB || M5307C3 || M5407C3) config HW_FEITH bool -- cgit v1.2.3 From 2ed5e6d09e266bd2288d49aaaf240ed8c468c13c Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Mon, 7 Nov 2005 14:09:50 +1000 Subject: [PATCH] m68knommu: move some platform irq support out of irq.h Move some of the m68knommu platform specific irq core support to its own header, irqnode.h. Having it in asm-m68knommu/irq.h causes some build pain, since it is included in a number of common code places (and not all the required definitions will be included at these places). Signed-off-by: Greg Ungerer Signed-off-by: Linus Torvalds --- arch/m68knommu/kernel/asm-offsets.c | 1 + arch/m68knommu/platform/5307/ints.c | 1 + 2 files changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/m68knommu/kernel/asm-offsets.c b/arch/m68knommu/kernel/asm-offsets.c index cd3ffe12653..b988c7bdc6e 100644 --- a/arch/m68knommu/kernel/asm-offsets.c +++ b/arch/m68knommu/kernel/asm-offsets.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #define DEFINE(sym, val) \ diff --git a/arch/m68knommu/platform/5307/ints.c b/arch/m68knommu/platform/5307/ints.c index 0117754d44f..a134fb2f056 100644 --- a/arch/m68knommu/platform/5307/ints.c +++ b/arch/m68knommu/platform/5307/ints.c @@ -26,6 +26,7 @@ #include #include +#include #include #include #include -- cgit v1.2.3 From afc4841d8a0118fcce9fd520b21ec1da401603a3 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 31 Oct 2005 00:30:39 +0000 Subject: Turn rtlx upside down. o Coding style o Race condition on open o Switch to dynamic major o Header file cleanup Signed-off-by: Ralf Baechle --- arch/mips/kernel/rtlx.c | 197 +++++++++++++++++++++++------------------------- 1 file changed, 93 insertions(+), 104 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c index 8c81f3cb4e2..1d855112bac 100644 --- a/arch/mips/kernel/rtlx.c +++ b/arch/mips/kernel/rtlx.c @@ -20,42 +20,42 @@ #include #include #include -#include -#include -#include -#include -#include -#include -#include -#include -#include #include #include #include #include -#include -#include +#include #include #include -#include #include +#include -#define RTLX_MAJOR 64 #define RTLX_TARG_VPE 1 -struct rtlx_info *rtlx; +static struct rtlx_info *rtlx; static int major; static char module_name[] = "rtlx"; -static inline int spacefree(int read, int write, int size); +static struct irqaction irq; +static int irq_num; + +static inline int spacefree(int read, int write, int size) +{ + if (read == write) { + /* + * never fill the buffer completely, so indexes are always + * equal if empty and only empty, or !equal if data available + */ + return size - 1; + } + + return ((read + size - write) % size) - 1; +} static struct chan_waitqueues { wait_queue_head_t rt_queue; wait_queue_head_t lx_queue; } channel_wqs[RTLX_CHANNELS]; -static struct irqaction irq; -static int irq_num; - extern void *vpe_get_shared(int index); static void rtlx_dispatch(struct pt_regs *regs) @@ -63,9 +63,8 @@ static void rtlx_dispatch(struct pt_regs *regs) do_IRQ(MIPSCPU_INT_BASE + MIPS_CPU_RTLX_IRQ, regs); } -irqreturn_t rtlx_interrupt(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t rtlx_interrupt(int irq, void *dev_id, struct pt_regs *regs) { - irqreturn_t r = IRQ_HANDLED; int i; for (i = 0; i < RTLX_CHANNELS; i++) { @@ -75,30 +74,7 @@ irqreturn_t rtlx_interrupt(int irq, void *dev_id, struct pt_regs *regs) wake_up_interruptible(&channel_wqs[i].lx_queue); } - return r; -} - -void dump_rtlx(void) -{ - int i; - - printk("id 0x%lx state %d\n", rtlx->id, rtlx->state); - - for (i = 0; i < RTLX_CHANNELS; i++) { - struct rtlx_channel *chan = &rtlx->channel[i]; - - printk(" rt_state %d lx_state %d buffer_size %d\n", - chan->rt_state, chan->lx_state, chan->buffer_size); - - printk(" rt_read %d rt_write %d\n", - chan->rt_read, chan->rt_write); - - printk(" lx_read %d lx_write %d\n", - chan->lx_read, chan->lx_write); - - printk(" rt_buffer <%s>\n", chan->rt_buffer); - printk(" lx_buffer <%s>\n", chan->lx_buffer); - } + return IRQ_HANDLED; } /* call when we have the address of the shared structure from the SP side. */ @@ -108,7 +84,7 @@ static int rtlx_init(struct rtlx_info *rtlxi) if (rtlxi->id != RTLX_ID) { printk(KERN_WARNING "no valid RTLX id at 0x%p\n", rtlxi); - return (-ENOEXEC); + return -ENOEXEC; } /* initialise the wait queues */ @@ -120,9 +96,8 @@ static int rtlx_init(struct rtlx_info *rtlxi) /* set up for interrupt handling */ memset(&irq, 0, sizeof(struct irqaction)); - if (cpu_has_vint) { + if (cpu_has_vint) set_vi_handler(MIPS_CPU_RTLX_IRQ, rtlx_dispatch); - } irq_num = MIPSCPU_INT_BASE + MIPS_CPU_RTLX_IRQ; irq.handler = rtlx_interrupt; @@ -132,7 +107,8 @@ static int rtlx_init(struct rtlx_info *rtlxi) setup_irq(irq_num, &irq); rtlx = rtlxi; - return (0); + + return 0; } /* only allow one open process at a time to open each channel */ @@ -147,36 +123,36 @@ static int rtlx_open(struct inode *inode, struct file *filp) if (rtlx == NULL) { struct rtlx_info **p; if( (p = vpe_get_shared(RTLX_TARG_VPE)) == NULL) { - printk(" vpe_get_shared is NULL. Has an SP program been loaded?\n"); - return (-EFAULT); + printk(KERN_ERR "vpe_get_shared is NULL. " + "Has an SP program been loaded?\n"); + return -EFAULT; } if (*p == NULL) { - printk(" vpe_shared %p %p\n", p, *p); - return (-EFAULT); + printk(KERN_ERR "vpe_shared %p %p\n", p, *p); + return -EFAULT; } if ((ret = rtlx_init(*p)) < 0) - return (ret); + return ret; } chan = &rtlx->channel[minor]; - /* already open? */ - if (chan->lx_state == RTLX_STATE_OPENED) - return (-EBUSY); + if (test_and_set_bit(RTLX_STATE_OPENED, &chan->lx_state)) + return -EBUSY; - chan->lx_state = RTLX_STATE_OPENED; - return (0); + return 0; } static int rtlx_release(struct inode *inode, struct file *filp) { - int minor; + int minor = MINOR(inode->i_rdev); - minor = MINOR(inode->i_rdev); - rtlx->channel[minor].lx_state = RTLX_STATE_UNUSED; - return (0); + clear_bit(RTLX_STATE_OPENED, &rtlx->channel[minor].lx_state); + smp_mb__after_clear_bit(); + + return 0; } static unsigned int rtlx_poll(struct file *file, poll_table * wait) @@ -199,12 +175,13 @@ static unsigned int rtlx_poll(struct file *file, poll_table * wait) if (spacefree(chan->rt_read, chan->rt_write, chan->buffer_size)) mask |= POLLOUT | POLLWRNORM; - return (mask); + return mask; } static ssize_t rtlx_read(struct file *file, char __user * buffer, size_t count, loff_t * ppos) { + unsigned long failed; size_t fl = 0L; int minor; struct rtlx_channel *lx; @@ -216,7 +193,7 @@ static ssize_t rtlx_read(struct file *file, char __user * buffer, size_t count, /* data available? */ if (lx->lx_write == lx->lx_read) { if (file->f_flags & O_NONBLOCK) - return (0); // -EAGAIN makes cat whinge + return 0; /* -EAGAIN makes cat whinge */ /* go to sleep */ add_wait_queue(&channel_wqs[minor].lx_queue, &wait); @@ -232,39 +209,39 @@ static ssize_t rtlx_read(struct file *file, char __user * buffer, size_t count, } /* find out how much in total */ - count = min( count, - (size_t)(lx->lx_write + lx->buffer_size - lx->lx_read) % lx->buffer_size); + count = min(count, + (size_t)(lx->lx_write + lx->buffer_size - lx->lx_read) % lx->buffer_size); /* then how much from the read pointer onwards */ - fl = min( count, (size_t)lx->buffer_size - lx->lx_read); + fl = min(count, (size_t)lx->buffer_size - lx->lx_read); - copy_to_user (buffer, &lx->lx_buffer[lx->lx_read], fl); + failed = copy_to_user (buffer, &lx->lx_buffer[lx->lx_read], fl); + if (failed) { + count = fl - failed; + goto out; + } /* and if there is anything left at the beginning of the buffer */ - if ( count - fl ) - copy_to_user (buffer + fl, lx->lx_buffer, count - fl); + if (count - fl) { + failed = copy_to_user (buffer + fl, lx->lx_buffer, count - fl); + if (failed) { + count -= failed; + goto out; + } + } +out: /* update the index */ lx->lx_read += count; lx->lx_read %= lx->buffer_size; - return (count); -} - -static inline int spacefree(int read, int write, int size) -{ - if (read == write) { - /* never fill the buffer completely, so indexes are always equal if empty - and only empty, or !equal if data available */ - return (size - 1); - } - - return ((read + size - write) % size) - 1; + return count; } static ssize_t rtlx_write(struct file *file, const char __user * buffer, size_t count, loff_t * ppos) { + unsigned long failed; int minor; struct rtlx_channel *rt; size_t fl; @@ -277,7 +254,7 @@ static ssize_t rtlx_write(struct file *file, const char __user * buffer, if (!spacefree(rt->rt_read, rt->rt_write, rt->buffer_size)) { if (file->f_flags & O_NONBLOCK) - return (-EAGAIN); + return -EAGAIN; add_wait_queue(&channel_wqs[minor].rt_queue, &wait); set_current_state(TASK_INTERRUPTIBLE); @@ -290,52 +267,64 @@ static ssize_t rtlx_write(struct file *file, const char __user * buffer, } /* total number of bytes to copy */ - count = min( count, (size_t)spacefree(rt->rt_read, rt->rt_write, rt->buffer_size) ); + count = min(count, (size_t)spacefree(rt->rt_read, rt->rt_write, rt->buffer_size) ); /* first bit from write pointer to the end of the buffer, or count */ fl = min(count, (size_t) rt->buffer_size - rt->rt_write); - copy_from_user(&rt->rt_buffer[rt->rt_write], buffer, fl); + failed = copy_from_user(&rt->rt_buffer[rt->rt_write], buffer, fl); + if (failed) { + count = fl - failed; + goto out; + } /* if there's any left copy to the beginning of the buffer */ - if( count - fl ) - copy_from_user(rt->rt_buffer, buffer + fl, count - fl); + if (count - fl) { + failed = copy_from_user(rt->rt_buffer, buffer + fl, count - fl); + if (failed) { + count -= failed; + goto out; + } + } +out: rt->rt_write += count; rt->rt_write %= rt->buffer_size; - return(count); + return count; } static struct file_operations rtlx_fops = { - .owner = THIS_MODULE, - .open = rtlx_open, - .release = rtlx_release, - .write = rtlx_write, - .read = rtlx_read, - .poll = rtlx_poll + .owner = THIS_MODULE, + .open = rtlx_open, + .release = rtlx_release, + .write = rtlx_write, + .read = rtlx_read, + .poll = rtlx_poll }; -static int rtlx_module_init(void) +static char register_chrdev_failed[] __initdata = + KERN_ERR "rtlx_module_init: unable to register device\n"; + +static int __init rtlx_module_init(void) { - if ((major = register_chrdev(RTLX_MAJOR, module_name, &rtlx_fops)) < 0) { - printk("rtlx_module_init: unable to register device\n"); - return (-EBUSY); + major = register_chrdev(0, module_name, &rtlx_fops); + if (major < 0) { + printk(register_chrdev_failed); + return major; } - if (major == 0) - major = RTLX_MAJOR; - - return (0); + return 0; } -static void rtlx_module_exit(void) +static void __exit rtlx_module_exit(void) { unregister_chrdev(major, module_name); } module_init(rtlx_module_init); module_exit(rtlx_module_exit); + MODULE_DESCRIPTION("MIPS RTLX"); -MODULE_AUTHOR("Elizabeth Clarke, MIPS Technologies, Inc"); +MODULE_AUTHOR("Elizabeth Clarke, MIPS Technologies, Inc."); MODULE_LICENSE("GPL"); -- cgit v1.2.3 From b8c2a77ce38defcf539a4ba5c666f8e9f093f887 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 31 Oct 2005 13:08:37 +0000 Subject: PNX8550 uses a MIPS32-like processor core, not R4xx0. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 2 +- arch/mips/configs/pnx8550-jbs_defconfig | 11 ++++++----- arch/mips/configs/pnx8550-v2pci_defconfig | 10 ++++++---- 3 files changed, 13 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 0097a0d53b3..e380a8322a9 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -958,7 +958,7 @@ config SOC_PNX8550 bool select DMA_NONCOHERENT select HW_HAS_PCI - select SYS_HAS_CPU_R4X00 + select SYS_HAS_CPU_MIPS32_R1 select SYS_SUPPORTS_32BIT_KERNEL config SWAP_IO_SPACE diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig index 95f84d71191..555837e4c06 100644 --- a/arch/mips/configs/pnx8550-jbs_defconfig +++ b/arch/mips/configs/pnx8550-jbs_defconfig @@ -129,7 +129,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # -# CONFIG_CPU_MIPS32_R1 is not set +CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set # CONFIG_CPU_MIPS64_R2 is not set @@ -137,7 +137,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_TX39XX is not set # CONFIG_CPU_VR41XX is not set # CONFIG_CPU_R4300 is not set -CONFIG_CPU_R4X00=y +# CONFIG_CPU_R4X00 is not set # CONFIG_CPU_TX49XX is not set # CONFIG_CPU_R5000 is not set # CONFIG_CPU_R5432 is not set @@ -148,10 +148,11 @@ CONFIG_CPU_R4X00=y # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_R4X00=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPSR1=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y # # Kernel type @@ -162,11 +163,11 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set # CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_LLDSCD=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y diff --git a/arch/mips/configs/pnx8550-v2pci_defconfig b/arch/mips/configs/pnx8550-v2pci_defconfig index deb24c29ac0..05e65206a7b 100644 --- a/arch/mips/configs/pnx8550-v2pci_defconfig +++ b/arch/mips/configs/pnx8550-v2pci_defconfig @@ -128,7 +128,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # -# CONFIG_CPU_MIPS32_R1 is not set +CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set # CONFIG_CPU_MIPS64_R2 is not set @@ -136,7 +136,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_TX39XX is not set # CONFIG_CPU_VR41XX is not set # CONFIG_CPU_R4300 is not set -CONFIG_CPU_R4X00=y +# CONFIG_CPU_R4X00 is not set # CONFIG_CPU_TX49XX is not set # CONFIG_CPU_R5000 is not set # CONFIG_CPU_R5432 is not set @@ -147,10 +147,11 @@ CONFIG_CPU_R4X00=y # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_R4X00=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPSR1=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y # # Kernel type @@ -161,6 +162,7 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set CONFIG_CPU_ADVANCED=y -- cgit v1.2.3 From 307bd284c205616e02fb85557b97f0e3e969662e Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 31 Oct 2005 23:34:52 +0000 Subject: VPE loader janitoring o Switch to dynamic major o Remove duplicate SHN_MIPS_SCOMMON definition o Coding style: remove typedefs. o Coding style: reorder to avoid the need for forward declarations o Use kzalloc. Signed-off-by: Ralf Baechle --- arch/mips/kernel/vpe.c | 100 ++++++++++++++++++++++--------------------------- 1 file changed, 44 insertions(+), 56 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index 97fefcc9dbe..06be405be39 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -58,10 +58,6 @@ typedef void *vpe_handle; -// defined here because the kernel module loader doesn't have -// anything to do with it. -#define SHN_MIPS_SCOMMON 0xff03 - #ifndef ARCH_SHF_SMALL #define ARCH_SHF_SMALL 0 #endif @@ -69,11 +65,8 @@ typedef void *vpe_handle; /* If this is set, the section belongs in the init part of the module */ #define INIT_OFFSET_MASK (1UL << (BITS_PER_LONG-1)) -// temp number, -#define VPE_MAJOR 63 - static char module_name[] = "vpe"; -static int major = 0; +static int major; /* grab the likely amount of memory we will need. */ #ifdef CONFIG_MIPS_VPE_LOADER_TOM @@ -98,22 +91,7 @@ enum tc_state { TC_STATE_DYNAMIC }; -struct vpe; -typedef struct tc { - enum tc_state state; - int index; - - /* parent VPE */ - struct vpe *pvpe; - - /* The list of TC's with this VPE */ - struct list_head tc; - - /* The global list of tc's */ - struct list_head list; -} tc_t; - -typedef struct vpe { +struct vpe { enum vpe_state state; /* (device) minor associated with this vpe */ @@ -135,7 +113,21 @@ typedef struct vpe { /* shared symbol address */ void *shared_ptr; -} vpe_t; +}; + +struct tc { + enum tc_state state; + int index; + + /* parent VPE */ + struct vpe *pvpe; + + /* The list of TC's with this VPE */ + struct list_head tc; + + /* The global list of tc's */ + struct list_head list; +}; struct vpecontrol_ { /* Virtual processing elements */ @@ -146,7 +138,7 @@ struct vpecontrol_ { } vpecontrol; static void release_progmem(void *ptr); -static void dump_vpe(vpe_t * v); +static void dump_vpe(struct vpe * v); extern void save_gp_address(unsigned int secbase, unsigned int rel); /* get the vpe associated with this minor */ @@ -197,13 +189,11 @@ struct vpe *alloc_vpe(int minor) { struct vpe *v; - if ((v = kmalloc(sizeof(struct vpe), GFP_KERNEL)) == NULL) { + if ((v = kzalloc(sizeof(struct vpe), GFP_KERNEL)) == NULL) { printk(KERN_WARNING "VPE: alloc_vpe no mem\n"); return NULL; } - memset(v, 0, sizeof(struct vpe)); - INIT_LIST_HEAD(&v->tc); list_add_tail(&v->list, &vpecontrol.vpe_list); @@ -216,13 +206,11 @@ struct tc *alloc_tc(int index) { struct tc *t; - if ((t = kmalloc(sizeof(struct tc), GFP_KERNEL)) == NULL) { + if ((t = kzalloc(sizeof(struct tc), GFP_KERNEL)) == NULL) { printk(KERN_WARNING "VPE: alloc_tc no mem\n"); return NULL; } - memset(t, 0, sizeof(struct tc)); - INIT_LIST_HEAD(&t->tc); list_add_tail(&t->list, &vpecontrol.tc_list); @@ -412,16 +400,17 @@ static int apply_r_mips_26(struct module *me, uint32_t *location, return -ENOEXEC; } -/* Not desperately convinced this is a good check of an overflow condition - anyway. But it gets in the way of handling undefined weak symbols which - we want to set to zero. - if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) { - printk(KERN_ERR - "module %s: relocation overflow\n", - me->name); - return -ENOEXEC; - } -*/ +/* + * Not desperately convinced this is a good check of an overflow condition + * anyway. But it gets in the way of handling undefined weak symbols which + * we want to set to zero. + * if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) { + * printk(KERN_ERR + * "module %s: relocation overflow\n", + * me->name); + * return -ENOEXEC; + * } + */ *location = (*location & ~0x03ffffff) | ((*location + (v >> 2)) & 0x03ffffff); @@ -681,7 +670,7 @@ static void dump_tclist(void) } /* We are prepared so configure and start the VPE... */ -int vpe_run(vpe_t * v) +int vpe_run(struct vpe * v) { unsigned long val; struct tc *t; @@ -772,7 +761,7 @@ int vpe_run(vpe_t * v) return 0; } -static unsigned long find_vpe_symbols(vpe_t * v, Elf_Shdr * sechdrs, +static unsigned long find_vpe_symbols(struct vpe * v, Elf_Shdr * sechdrs, unsigned int symindex, const char *strtab, struct module *mod) { @@ -792,10 +781,12 @@ static unsigned long find_vpe_symbols(vpe_t * v, Elf_Shdr * sechdrs, return 0; } -/* Allocates a VPE with some program code space(the load address), copies the contents - of the program (p)buffer performing relocatations/etc, free's it when finished. +/* + * Allocates a VPE with some program code space(the load address), copies + * the contents of the program (p)buffer performing relocatations/etc, + * free's it when finished. */ -int vpe_elfload(vpe_t * v) +int vpe_elfload(struct vpe * v) { Elf_Ehdr *hdr; Elf_Shdr *sechdrs; @@ -931,7 +922,7 @@ cleanup: return err; } -static void dump_vpe(vpe_t * v) +static void dump_vpe(struct vpe * v) { struct tc *t; @@ -947,7 +938,7 @@ static void dump_vpe(vpe_t * v) static int vpe_open(struct inode *inode, struct file *filp) { int minor; - vpe_t *v; + struct vpe *v; /* assume only 1 device at the mo. */ if ((minor = MINOR(inode->i_rdev)) != 1) { @@ -1001,7 +992,7 @@ static int vpe_open(struct inode *inode, struct file *filp) static int vpe_release(struct inode *inode, struct file *filp) { int minor, ret = 0; - vpe_t *v; + struct vpe *v; Elf_Ehdr *hdr; minor = MINOR(inode->i_rdev); @@ -1035,7 +1026,7 @@ static ssize_t vpe_write(struct file *file, const char __user * buffer, { int minor; size_t ret = count; - vpe_t *v; + struct vpe *v; minor = MINOR(file->f_dentry->d_inode->i_rdev); if ((v = get_vpe(minor)) == NULL) @@ -1180,14 +1171,11 @@ static int __init vpe_module_init(void) return -ENODEV; } - if ((major = register_chrdev(VPE_MAJOR, module_name, &vpe_fops) < 0)) { + if ((major = register_chrdev(0, module_name, &vpe_fops) < 0)) { printk("VPE loader: unable to register character device\n"); - return -EBUSY; + return major; } - if (major == 0) - major = VPE_MAJOR; - dmt(); dvpe(); -- cgit v1.2.3 From 15b96a475706bfac71697a5d2f256750bdf749d3 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 7 Nov 2005 18:05:37 +0000 Subject: Add .gitignore files for MIPS. --- arch/mips/boot/.gitignore | 4 ++++ 1 file changed, 4 insertions(+) create mode 100644 arch/mips/boot/.gitignore (limited to 'arch') diff --git a/arch/mips/boot/.gitignore b/arch/mips/boot/.gitignore new file mode 100644 index 00000000000..ba63401c6e1 --- /dev/null +++ b/arch/mips/boot/.gitignore @@ -0,0 +1,4 @@ +mkboot +elf2ecoff +zImage +zImage.tmp -- cgit v1.2.3 From 53c2df2f4ebbc1d8231ca7cc13ac5381230888b1 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Thu, 3 Nov 2005 01:01:15 +0900 Subject: Use rtc_lock to protect RTC operations Many RTC routines were not protected against each other, so there are potential races, for example, ntp-update against /dev/rtc. This patch fixes them using rtc_lock. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/ddb5xxx/common/rtc_ds1386.c | 6 ++++++ arch/mips/dec/time.c | 24 ++++++++++++++++++++++-- arch/mips/jmr3927/common/rtc_ds1742.c | 6 ++++++ arch/mips/lasat/ds1603.c | 9 +++++++++ arch/mips/momentum/jaguar_atx/setup.c | 6 ++++++ arch/mips/momentum/ocelot_3/setup.c | 6 ++++++ arch/mips/momentum/ocelot_c/setup.c | 6 ++++++ arch/mips/pmc-sierra/yosemite/setup.c | 6 ++++++ arch/mips/sgi-ip22/ip22-time.c | 6 ++++++ arch/mips/sibyte/swarm/rtc_m41t81.c | 7 +++++++ arch/mips/sibyte/swarm/rtc_xicor1241.c | 6 ++++++ 11 files changed, 86 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/ddb5xxx/common/rtc_ds1386.c b/arch/mips/ddb5xxx/common/rtc_ds1386.c index f5b11508ff2..995896ac0e3 100644 --- a/arch/mips/ddb5xxx/common/rtc_ds1386.c +++ b/arch/mips/ddb5xxx/common/rtc_ds1386.c @@ -41,7 +41,9 @@ rtc_ds1386_get_time(void) u8 byte; u8 temp; unsigned int year, month, day, hour, minute, second; + unsigned long flags; + spin_lock_irqsave(&rtc_lock, flags); /* let us freeze external registers */ byte = READ_RTC(0xB); byte &= 0x3f; @@ -60,6 +62,7 @@ rtc_ds1386_get_time(void) /* enable time transfer */ byte |= 0x80; WRITE_RTC(0xB, byte); + spin_unlock_irqrestore(&rtc_lock, flags); /* calc hour */ if (temp & 0x40) { @@ -81,7 +84,9 @@ rtc_ds1386_set_time(unsigned long t) u8 byte; u8 temp; u8 year, month, day, hour, minute, second; + unsigned long flags; + spin_lock_irqsave(&rtc_lock, flags); /* let us freeze external registers */ byte = READ_RTC(0xB); byte &= 0x3f; @@ -133,6 +138,7 @@ rtc_ds1386_set_time(unsigned long t) if (second != READ_RTC(0x1)) { WRITE_RTC(0x1, second); } + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } diff --git a/arch/mips/dec/time.c b/arch/mips/dec/time.c index dc7091caa7a..17482234413 100644 --- a/arch/mips/dec/time.c +++ b/arch/mips/dec/time.c @@ -37,10 +37,25 @@ #include +/* + * Returns true if a clock update is in progress + */ +static inline unsigned char dec_rtc_is_updating(void) +{ + unsigned char uip; + unsigned long flags; + + spin_lock_irqsave(&rtc_lock, flags); + uip = (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP); + spin_unlock_irqrestore(&rtc_lock, flags); + return uip; +} + static unsigned long dec_rtc_get_time(void) { unsigned int year, mon, day, hour, min, sec, real_year; int i; + unsigned long flags; /* The Linux interpretation of the DS1287 clock register contents: * When the Update-In-Progress (UIP) flag goes from 1 to 0, the @@ -49,11 +64,12 @@ static unsigned long dec_rtc_get_time(void) */ /* read RTC exactly on falling edge of update flag */ for (i = 0; i < 1000000; i++) /* may take up to 1 second... */ - if (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP) + if (dec_rtc_is_updating()) break; for (i = 0; i < 1000000; i++) /* must try at least 2.228 ms */ - if (!(CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP)) + if (!dec_rtc_is_updating()) break; + spin_lock_irqsave(&rtc_lock, flags); /* Isn't this overkill? UIP above should guarantee consistency */ do { sec = CMOS_READ(RTC_SECONDS); @@ -77,6 +93,7 @@ static unsigned long dec_rtc_get_time(void) * of unused BBU RAM locations. */ real_year = CMOS_READ(RTC_DEC_YEAR); + spin_unlock_irqrestore(&rtc_lock, flags); year += real_year - 72 + 2000; return mktime(year, mon, day, hour, min, sec); @@ -95,6 +112,8 @@ static int dec_rtc_set_mmss(unsigned long nowtime) int real_seconds, real_minutes, cmos_minutes; unsigned char save_control, save_freq_select; + /* irq are locally disabled here */ + spin_lock(&rtc_lock); /* tell the clock it's being set */ save_control = CMOS_READ(RTC_CONTROL); CMOS_WRITE((save_control | RTC_SET), RTC_CONTROL); @@ -141,6 +160,7 @@ static int dec_rtc_set_mmss(unsigned long nowtime) */ CMOS_WRITE(save_control, RTC_CONTROL); CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); + spin_unlock(&rtc_lock); return retval; } diff --git a/arch/mips/jmr3927/common/rtc_ds1742.c b/arch/mips/jmr3927/common/rtc_ds1742.c index 1ae4318e135..8b407d7dc46 100644 --- a/arch/mips/jmr3927/common/rtc_ds1742.c +++ b/arch/mips/jmr3927/common/rtc_ds1742.c @@ -57,7 +57,9 @@ rtc_ds1742_get_time(void) { unsigned int year, month, day, hour, minute, second; unsigned int century; + unsigned long flags; + spin_lock_irqsave(&rtc_lock, flags); CMOS_WRITE(RTC_READ, RTC_CONTROL); second = BCD2BIN(CMOS_READ(RTC_SECONDS) & RTC_SECONDS_MASK); minute = BCD2BIN(CMOS_READ(RTC_MINUTES)); @@ -67,6 +69,7 @@ rtc_ds1742_get_time(void) year = BCD2BIN(CMOS_READ(RTC_YEAR)); century = BCD2BIN(CMOS_READ(RTC_CENTURY) & RTC_CENTURY_MASK); CMOS_WRITE(0, RTC_CONTROL); + spin_unlock_irqrestore(&rtc_lock, flags); year += century * 100; @@ -81,7 +84,9 @@ rtc_ds1742_set_time(unsigned long t) u8 year, month, day, hour, minute, second; u8 cmos_year, cmos_month, cmos_day, cmos_hour, cmos_minute, cmos_second; int cmos_century; + unsigned long flags; + spin_lock_irqsave(&rtc_lock, flags); CMOS_WRITE(RTC_READ, RTC_CONTROL); cmos_second = (u8)(CMOS_READ(RTC_SECONDS) & RTC_SECONDS_MASK); cmos_minute = (u8)CMOS_READ(RTC_MINUTES); @@ -139,6 +144,7 @@ rtc_ds1742_set_time(unsigned long t) /* RTC_CENTURY and RTC_CONTROL share same address... */ CMOS_WRITE(cmos_century, RTC_CONTROL); + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } diff --git a/arch/mips/lasat/ds1603.c b/arch/mips/lasat/ds1603.c index 9d7812e03dc..7dced67c55e 100644 --- a/arch/mips/lasat/ds1603.c +++ b/arch/mips/lasat/ds1603.c @@ -8,6 +8,7 @@ #include #include #include +#include #include "ds1603.h" @@ -138,19 +139,27 @@ static void rtc_end_op(void) unsigned long ds1603_read(void) { unsigned long word; + unsigned long flags; + + spin_lock_irqsave(&rtc_lock, flags); rtc_init_op(); rtc_write_byte(READ_TIME_CMD); word = rtc_read_word(); rtc_end_op(); + spin_unlock_irqrestore(&rtc_lock, flags); return word; } int ds1603_set(unsigned long time) { + unsigned long flags; + + spin_lock_irqsave(&rtc_lock, flags); rtc_init_op(); rtc_write_byte(SET_TIME_CMD); rtc_write_word(time); rtc_end_op(); + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } diff --git a/arch/mips/momentum/jaguar_atx/setup.c b/arch/mips/momentum/jaguar_atx/setup.c index 768bf440645..bab192ddc18 100644 --- a/arch/mips/momentum/jaguar_atx/setup.c +++ b/arch/mips/momentum/jaguar_atx/setup.c @@ -149,7 +149,9 @@ arch_initcall(per_cpu_mappings); unsigned long m48t37y_get_time(void) { unsigned int year, month, day, hour, min, sec; + unsigned long flags; + spin_lock_irqsave(&rtc_lock, flags); /* stop the update */ rtc_base[0x7ff8] = 0x40; @@ -166,6 +168,7 @@ unsigned long m48t37y_get_time(void) /* start the update */ rtc_base[0x7ff8] = 0x00; + spin_unlock_irqrestore(&rtc_lock, flags); return mktime(year, month, day, hour, min, sec); } @@ -173,11 +176,13 @@ unsigned long m48t37y_get_time(void) int m48t37y_set_time(unsigned long sec) { struct rtc_time tm; + unsigned long flags; /* convert to a more useful format -- note months count from 0 */ to_tm(sec, &tm); tm.tm_mon += 1; + spin_lock_irqsave(&rtc_lock, flags); /* enable writing */ rtc_base[0x7ff8] = 0x80; @@ -201,6 +206,7 @@ int m48t37y_set_time(unsigned long sec) /* disable writing */ rtc_base[0x7ff8] = 0x00; + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } diff --git a/arch/mips/momentum/ocelot_3/setup.c b/arch/mips/momentum/ocelot_3/setup.c index a7803e08f9d..c9b7ff8148e 100644 --- a/arch/mips/momentum/ocelot_3/setup.c +++ b/arch/mips/momentum/ocelot_3/setup.c @@ -135,7 +135,9 @@ void setup_wired_tlb_entries(void) unsigned long m48t37y_get_time(void) { unsigned int year, month, day, hour, min, sec; + unsigned long flags; + spin_lock_irqsave(&rtc_lock, flags); /* stop the update */ rtc_base[0x7ff8] = 0x40; @@ -152,6 +154,7 @@ unsigned long m48t37y_get_time(void) /* start the update */ rtc_base[0x7ff8] = 0x00; + spin_unlock_irqrestore(&rtc_lock, flags); return mktime(year, month, day, hour, min, sec); } @@ -159,11 +162,13 @@ unsigned long m48t37y_get_time(void) int m48t37y_set_time(unsigned long sec) { struct rtc_time tm; + unsigned long flags; /* convert to a more useful format -- note months count from 0 */ to_tm(sec, &tm); tm.tm_mon += 1; + spin_lock_irqsave(&rtc_lock, flags); /* enable writing */ rtc_base[0x7ff8] = 0x80; @@ -187,6 +192,7 @@ int m48t37y_set_time(unsigned long sec) /* disable writing */ rtc_base[0x7ff8] = 0x00; + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } diff --git a/arch/mips/momentum/ocelot_c/setup.c b/arch/mips/momentum/ocelot_c/setup.c index ce70fc96f16..2755c154747 100644 --- a/arch/mips/momentum/ocelot_c/setup.c +++ b/arch/mips/momentum/ocelot_c/setup.c @@ -140,7 +140,9 @@ unsigned long m48t37y_get_time(void) unsigned char* rtc_base = (unsigned char*)0xfc800000; #endif unsigned int year, month, day, hour, min, sec; + unsigned long flags; + spin_lock_irqsave(&rtc_lock, flags); /* stop the update */ rtc_base[0x7ff8] = 0x40; @@ -157,6 +159,7 @@ unsigned long m48t37y_get_time(void) /* start the update */ rtc_base[0x7ff8] = 0x00; + spin_unlock_irqrestore(&rtc_lock, flags); return mktime(year, month, day, hour, min, sec); } @@ -169,11 +172,13 @@ int m48t37y_set_time(unsigned long sec) unsigned char* rtc_base = (unsigned char*)0xfc800000; #endif struct rtc_time tm; + unsigned long flags; /* convert to a more useful format -- note months count from 0 */ to_tm(sec, &tm); tm.tm_mon += 1; + spin_lock_irqsave(&rtc_lock, flags); /* enable writing */ rtc_base[0x7ff8] = 0x80; @@ -197,6 +202,7 @@ int m48t37y_set_time(unsigned long sec) /* disable writing */ rtc_base[0x7ff8] = 0x00; + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } diff --git a/arch/mips/pmc-sierra/yosemite/setup.c b/arch/mips/pmc-sierra/yosemite/setup.c index bdc2ab55bed..059755b5ed5 100644 --- a/arch/mips/pmc-sierra/yosemite/setup.c +++ b/arch/mips/pmc-sierra/yosemite/setup.c @@ -73,7 +73,9 @@ void __init bus_error_init(void) unsigned long m48t37y_get_time(void) { unsigned int year, month, day, hour, min, sec; + unsigned long flags; + spin_lock_irqsave(&rtc_lock, flags); /* Stop the update to the time */ m48t37_base->control = 0x40; @@ -88,6 +90,7 @@ unsigned long m48t37y_get_time(void) /* Start the update to the time again */ m48t37_base->control = 0x00; + spin_unlock_irqrestore(&rtc_lock, flags); return mktime(year, month, day, hour, min, sec); } @@ -95,11 +98,13 @@ unsigned long m48t37y_get_time(void) int m48t37y_set_time(unsigned long sec) { struct rtc_time tm; + unsigned long flags; /* convert to a more useful format -- note months count from 0 */ to_tm(sec, &tm); tm.tm_mon += 1; + spin_lock_irqsave(&rtc_lock, flags); /* enable writing */ m48t37_base->control = 0x80; @@ -123,6 +128,7 @@ int m48t37y_set_time(unsigned long sec) /* disable writing */ m48t37_base->control = 0x00; + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } diff --git a/arch/mips/sgi-ip22/ip22-time.c b/arch/mips/sgi-ip22/ip22-time.c index df9b5694328..b7300cc5c5a 100644 --- a/arch/mips/sgi-ip22/ip22-time.c +++ b/arch/mips/sgi-ip22/ip22-time.c @@ -35,7 +35,9 @@ static unsigned long indy_rtc_get_time(void) { unsigned int yrs, mon, day, hrs, min, sec; unsigned int save_control; + unsigned long flags; + spin_lock_irqsave(&rtc_lock, flags); save_control = hpc3c0->rtcregs[RTC_CMD] & 0xff; hpc3c0->rtcregs[RTC_CMD] = save_control | RTC_TE; @@ -47,6 +49,7 @@ static unsigned long indy_rtc_get_time(void) yrs = BCD2BIN(hpc3c0->rtcregs[RTC_YEAR] & 0xff); hpc3c0->rtcregs[RTC_CMD] = save_control; + spin_unlock_irqrestore(&rtc_lock, flags); if (yrs < 45) yrs += 30; @@ -60,6 +63,7 @@ static int indy_rtc_set_time(unsigned long tim) { struct rtc_time tm; unsigned int save_control; + unsigned long flags; to_tm(tim, &tm); @@ -68,6 +72,7 @@ static int indy_rtc_set_time(unsigned long tim) if (tm.tm_year >= 100) tm.tm_year -= 100; + spin_lock_irqsave(&rtc_lock, flags); save_control = hpc3c0->rtcregs[RTC_CMD] & 0xff; hpc3c0->rtcregs[RTC_CMD] = save_control | RTC_TE; @@ -80,6 +85,7 @@ static int indy_rtc_set_time(unsigned long tim) hpc3c0->rtcregs[RTC_HUNDREDTH_SECOND] = 0; hpc3c0->rtcregs[RTC_CMD] = save_control; + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } diff --git a/arch/mips/sibyte/swarm/rtc_m41t81.c b/arch/mips/sibyte/swarm/rtc_m41t81.c index 5b4fc26c1b3..c13914bdda5 100644 --- a/arch/mips/sibyte/swarm/rtc_m41t81.c +++ b/arch/mips/sibyte/swarm/rtc_m41t81.c @@ -144,6 +144,7 @@ static int m41t81_write(uint8_t addr, int b) int m41t81_set_time(unsigned long t) { struct rtc_time tm; + unsigned long flags; to_tm(t, &tm); @@ -153,6 +154,7 @@ int m41t81_set_time(unsigned long t) * believe we should finish writing min within a second. */ + spin_lock_irqsave(&rtc_lock, flags); tm.tm_sec = BIN2BCD(tm.tm_sec); m41t81_write(M41T81REG_SC, tm.tm_sec); @@ -180,6 +182,7 @@ int m41t81_set_time(unsigned long t) tm.tm_year %= 100; tm.tm_year = BIN2BCD(tm.tm_year); m41t81_write(M41T81REG_YR, tm.tm_year); + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } @@ -187,19 +190,23 @@ int m41t81_set_time(unsigned long t) unsigned long m41t81_get_time(void) { unsigned int year, mon, day, hour, min, sec; + unsigned long flags; /* * min is valid if two reads of sec are the same. */ for (;;) { + spin_lock_irqsave(&rtc_lock, flags); sec = m41t81_read(M41T81REG_SC); min = m41t81_read(M41T81REG_MN); if (sec == m41t81_read(M41T81REG_SC)) break; + spin_unlock_irqrestore(&rtc_lock, flags); } hour = m41t81_read(M41T81REG_HR) & 0x3f; day = m41t81_read(M41T81REG_DT); mon = m41t81_read(M41T81REG_MO); year = m41t81_read(M41T81REG_YR); + spin_unlock_irqrestore(&rtc_lock, flags); sec = BCD2BIN(sec); min = BCD2BIN(min); diff --git a/arch/mips/sibyte/swarm/rtc_xicor1241.c b/arch/mips/sibyte/swarm/rtc_xicor1241.c index d9ff9323f24..f4a17883641 100644 --- a/arch/mips/sibyte/swarm/rtc_xicor1241.c +++ b/arch/mips/sibyte/swarm/rtc_xicor1241.c @@ -113,9 +113,11 @@ int xicor_set_time(unsigned long t) { struct rtc_time tm; int tmp; + unsigned long flags; to_tm(t, &tm); + spin_lock_irqsave(&rtc_lock, flags); /* unlock writes to the CCR */ xicor_write(X1241REG_SR, X1241REG_SR_WEL); xicor_write(X1241REG_SR, X1241REG_SR_WEL | X1241REG_SR_RWEL); @@ -160,6 +162,7 @@ int xicor_set_time(unsigned long t) xicor_write(X1241REG_HR, tmp); xicor_write(X1241REG_SR, 0); + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } @@ -167,7 +170,9 @@ int xicor_set_time(unsigned long t) unsigned long xicor_get_time(void) { unsigned int year, mon, day, hour, min, sec, y2k; + unsigned long flags; + spin_lock_irqsave(&rtc_lock, flags); sec = xicor_read(X1241REG_SC); min = xicor_read(X1241REG_MN); hour = xicor_read(X1241REG_HR); @@ -183,6 +188,7 @@ unsigned long xicor_get_time(void) mon = xicor_read(X1241REG_MO); year = xicor_read(X1241REG_YR); y2k = xicor_read(X1241REG_Y2K); + spin_unlock_irqrestore(&rtc_lock, flags); sec = BCD2BIN(sec); min = BCD2BIN(min); -- cgit v1.2.3 From 0d959c260e98b6b046d268b5ef5b76caf0026ab2 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 5 Nov 2005 11:26:43 +0000 Subject: IRIX: Use schedule_timeout_interruptible. Signed-off-by: Ralf Baechle --- arch/mips/kernel/irixsig.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/irixsig.c b/arch/mips/kernel/irixsig.c index 908e6368420..dd118c60bcd 100644 --- a/arch/mips/kernel/irixsig.c +++ b/arch/mips/kernel/irixsig.c @@ -502,8 +502,7 @@ asmlinkage int irix_sigpoll_sys(unsigned long __user *set, while(1) { long tmp = 0; - current->state = TASK_INTERRUPTIBLE; - expire = schedule_timeout(expire); + expire = schedule_timeout_interruptible(expire); for (i=0; i<=4; i++) tmp |= (current->pending.signal.sig[i] & kset.sig[i]); -- cgit v1.2.3 From 16cd3951366a013d52006982108437d3343c2fae Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Sat, 5 Nov 2005 23:00:58 +0900 Subject: Fix return type of setup_frame variants Since 2.6.13-rc1 setup_frame and its variants return int. But some bits were missed in the conversion. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/kernel/signal.c | 3 --- arch/mips/kernel/signal32.c | 13 ++++++++----- 2 files changed, 8 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index 9202a17db8f..05e09eedabf 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -384,9 +384,6 @@ give_sigsegv: return 0; } -extern void setup_rt_frame_n32(struct k_sigaction * ka, - struct pt_regs *regs, int signr, sigset_t *set, siginfo_t *info); - static inline int handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, sigset_t *oldset, struct pt_regs *regs) { diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index dbe82130312..e315d3f6aa6 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -647,8 +647,8 @@ static inline void *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, return (void *)((sp - frame_size) & ALMASK); } -void setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs, - int signr, sigset_t *set) +int setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs, + int signr, sigset_t *set) { struct sigframe *frame; int err = 0; @@ -694,13 +694,15 @@ void setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs, current->comm, current->pid, frame, regs->cp0_epc, frame->sf_code); #endif - return; + return 1; give_sigsegv: force_sigsegv(signr, current); + return 0; } -void setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs, int signr, sigset_t *set, siginfo_t *info) +int setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs, + int signr, sigset_t *set, siginfo_t *info) { struct rt_sigframe32 *frame; int err = 0; @@ -763,10 +765,11 @@ void setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs, int signr, current->comm, current->pid, frame, regs->cp0_epc, frame->rs_code); #endif - return; + return 1; give_sigsegv: force_sigsegv(signr, current); + return 0; } static inline int handle_signal(unsigned long sig, siginfo_t *info, -- cgit v1.2.3