From 32404da2ac967a8776083259e05afc4ea6567cea Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 11 Oct 2007 11:15:01 +0200 Subject: x86_64: prepare shared kernel/trampoline.S Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86_64/kernel/Makefile | 2 +- arch/x86_64/kernel/trampoline.S | 166 ------------------------------------- arch/x86_64/kernel/trampoline_64.S | 166 +++++++++++++++++++++++++++++++++++++ 3 files changed, 167 insertions(+), 167 deletions(-) delete mode 100644 arch/x86_64/kernel/trampoline.S create mode 100644 arch/x86_64/kernel/trampoline_64.S (limited to 'arch') diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile index 7a71d0e7d48..2bbe7df19da 100644 --- a/arch/x86_64/kernel/Makefile +++ b/arch/x86_64/kernel/Makefile @@ -20,7 +20,7 @@ obj-$(CONFIG_ACPI) += acpi/ obj-$(CONFIG_X86_MSR) += msr.o obj-$(CONFIG_MICROCODE) += microcode.o obj-$(CONFIG_X86_CPUID) += cpuid.o -obj-$(CONFIG_SMP) += smp_64.o smpboot_64.o trampoline.o tsc_sync.o +obj-$(CONFIG_SMP) += smp_64.o smpboot_64.o trampoline_64.o tsc_sync.o obj-y += apic_64.o nmi_64.o obj-y += io_apic_64.o mpparse_64.o genapic_64.o genapic_flat.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel_64.o crash_64.o diff --git a/arch/x86_64/kernel/trampoline.S b/arch/x86_64/kernel/trampoline.S deleted file mode 100644 index e7e2764c461..00000000000 --- a/arch/x86_64/kernel/trampoline.S +++ /dev/null @@ -1,166 +0,0 @@ -/* - * - * Trampoline.S Derived from Setup.S by Linus Torvalds - * - * 4 Jan 1997 Michael Chastain: changed to gnu as. - * 15 Sept 2005 Eric Biederman: 64bit PIC support - * - * Entry: CS:IP point to the start of our code, we are - * in real mode with no stack, but the rest of the - * trampoline page to make our stack and everything else - * is a mystery. - * - * In fact we don't actually need a stack so we don't - * set one up. - * - * On entry to trampoline_data, the processor is in real mode - * with 16-bit addressing and 16-bit data. CS has some value - * and IP is zero. Thus, data addresses need to be absolute - * (no relocation) and are taken with regard to r_base. - * - * With the addition of trampoline_level4_pgt this code can - * now enter a 64bit kernel that lives at arbitrary 64bit - * physical addresses. - * - * If you work on this file, check the object module with objdump - * --full-contents --reloc to make sure there are no relocation - * entries. - */ - -#include -#include -#include -#include -#include - -.data - -.code16 - -ENTRY(trampoline_data) -r_base = . - cli # We should be safe anyway - wbinvd - mov %cs, %ax # Code and data in the same place - mov %ax, %ds - mov %ax, %es - mov %ax, %ss - - - movl $0xA5A5A5A5, trampoline_data - r_base - # write marker for master knows we're running - - # Setup stack - movw $(trampoline_stack_end - r_base), %sp - - call verify_cpu # Verify the cpu supports long mode - testl %eax, %eax # Check for return code - jnz no_longmode - - mov %cs, %ax - movzx %ax, %esi # Find the 32bit trampoline location - shll $4, %esi - - # Fixup the vectors - addl %esi, startup_32_vector - r_base - addl %esi, startup_64_vector - r_base - addl %esi, tgdt + 2 - r_base # Fixup the gdt pointer - - /* - * GDT tables in non default location kernel can be beyond 16MB and - * lgdt will not be able to load the address as in real mode default - * operand size is 16bit. Use lgdtl instead to force operand size - * to 32 bit. - */ - - lidtl tidt - r_base # load idt with 0, 0 - lgdtl tgdt - r_base # load gdt with whatever is appropriate - - xor %ax, %ax - inc %ax # protected mode (PE) bit - lmsw %ax # into protected mode - - # flush prefetch and jump to startup_32 - ljmpl *(startup_32_vector - r_base) - - .code32 - .balign 4 -startup_32: - movl $__KERNEL_DS, %eax # Initialize the %ds segment register - movl %eax, %ds - - xorl %eax, %eax - btsl $5, %eax # Enable PAE mode - movl %eax, %cr4 - - # Setup trampoline 4 level pagetables - leal (trampoline_level4_pgt - r_base)(%esi), %eax - movl %eax, %cr3 - - movl $MSR_EFER, %ecx - movl $(1 << _EFER_LME), %eax # Enable Long Mode - xorl %edx, %edx - wrmsr - - xorl %eax, %eax - btsl $31, %eax # Enable paging and in turn activate Long Mode - btsl $0, %eax # Enable protected mode - movl %eax, %cr0 - - /* - * At this point we're in long mode but in 32bit compatibility mode - * with EFER.LME = 1, CS.L = 0, CS.D = 1 (and in turn - * EFER.LMA = 1). Now we want to jump in 64bit mode, to do that we use - * the new gdt/idt that has __KERNEL_CS with CS.L = 1. - */ - ljmp *(startup_64_vector - r_base)(%esi) - - .code64 - .balign 4 -startup_64: - # Now jump into the kernel using virtual addresses - movq $secondary_startup_64, %rax - jmp *%rax - - .code16 -no_longmode: - hlt - jmp no_longmode -#include "verify_cpu.S" - - # Careful these need to be in the same 64K segment as the above; -tidt: - .word 0 # idt limit = 0 - .word 0, 0 # idt base = 0L - - # Duplicate the global descriptor table - # so the kernel can live anywhere - .balign 4 -tgdt: - .short tgdt_end - tgdt # gdt limit - .long tgdt - r_base - .short 0 - .quad 0x00cf9b000000ffff # __KERNEL32_CS - .quad 0x00af9b000000ffff # __KERNEL_CS - .quad 0x00cf93000000ffff # __KERNEL_DS -tgdt_end: - - .balign 4 -startup_32_vector: - .long startup_32 - r_base - .word __KERNEL32_CS, 0 - - .balign 4 -startup_64_vector: - .long startup_64 - r_base - .word __KERNEL_CS, 0 - -trampoline_stack: - .org 0x1000 -trampoline_stack_end: -ENTRY(trampoline_level4_pgt) - .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE - .fill 510,8,0 - .quad level3_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE - -ENTRY(trampoline_end) diff --git a/arch/x86_64/kernel/trampoline_64.S b/arch/x86_64/kernel/trampoline_64.S new file mode 100644 index 00000000000..e7e2764c461 --- /dev/null +++ b/arch/x86_64/kernel/trampoline_64.S @@ -0,0 +1,166 @@ +/* + * + * Trampoline.S Derived from Setup.S by Linus Torvalds + * + * 4 Jan 1997 Michael Chastain: changed to gnu as. + * 15 Sept 2005 Eric Biederman: 64bit PIC support + * + * Entry: CS:IP point to the start of our code, we are + * in real mode with no stack, but the rest of the + * trampoline page to make our stack and everything else + * is a mystery. + * + * In fact we don't actually need a stack so we don't + * set one up. + * + * On entry to trampoline_data, the processor is in real mode + * with 16-bit addressing and 16-bit data. CS has some value + * and IP is zero. Thus, data addresses need to be absolute + * (no relocation) and are taken with regard to r_base. + * + * With the addition of trampoline_level4_pgt this code can + * now enter a 64bit kernel that lives at arbitrary 64bit + * physical addresses. + * + * If you work on this file, check the object module with objdump + * --full-contents --reloc to make sure there are no relocation + * entries. + */ + +#include +#include +#include +#include +#include + +.data + +.code16 + +ENTRY(trampoline_data) +r_base = . + cli # We should be safe anyway + wbinvd + mov %cs, %ax # Code and data in the same place + mov %ax, %ds + mov %ax, %es + mov %ax, %ss + + + movl $0xA5A5A5A5, trampoline_data - r_base + # write marker for master knows we're running + + # Setup stack + movw $(trampoline_stack_end - r_base), %sp + + call verify_cpu # Verify the cpu supports long mode + testl %eax, %eax # Check for return code + jnz no_longmode + + mov %cs, %ax + movzx %ax, %esi # Find the 32bit trampoline location + shll $4, %esi + + # Fixup the vectors + addl %esi, startup_32_vector - r_base + addl %esi, startup_64_vector - r_base + addl %esi, tgdt + 2 - r_base # Fixup the gdt pointer + + /* + * GDT tables in non default location kernel can be beyond 16MB and + * lgdt will not be able to load the address as in real mode default + * operand size is 16bit. Use lgdtl instead to force operand size + * to 32 bit. + */ + + lidtl tidt - r_base # load idt with 0, 0 + lgdtl tgdt - r_base # load gdt with whatever is appropriate + + xor %ax, %ax + inc %ax # protected mode (PE) bit + lmsw %ax # into protected mode + + # flush prefetch and jump to startup_32 + ljmpl *(startup_32_vector - r_base) + + .code32 + .balign 4 +startup_32: + movl $__KERNEL_DS, %eax # Initialize the %ds segment register + movl %eax, %ds + + xorl %eax, %eax + btsl $5, %eax # Enable PAE mode + movl %eax, %cr4 + + # Setup trampoline 4 level pagetables + leal (trampoline_level4_pgt - r_base)(%esi), %eax + movl %eax, %cr3 + + movl $MSR_EFER, %ecx + movl $(1 << _EFER_LME), %eax # Enable Long Mode + xorl %edx, %edx + wrmsr + + xorl %eax, %eax + btsl $31, %eax # Enable paging and in turn activate Long Mode + btsl $0, %eax # Enable protected mode + movl %eax, %cr0 + + /* + * At this point we're in long mode but in 32bit compatibility mode + * with EFER.LME = 1, CS.L = 0, CS.D = 1 (and in turn + * EFER.LMA = 1). Now we want to jump in 64bit mode, to do that we use + * the new gdt/idt that has __KERNEL_CS with CS.L = 1. + */ + ljmp *(startup_64_vector - r_base)(%esi) + + .code64 + .balign 4 +startup_64: + # Now jump into the kernel using virtual addresses + movq $secondary_startup_64, %rax + jmp *%rax + + .code16 +no_longmode: + hlt + jmp no_longmode +#include "verify_cpu.S" + + # Careful these need to be in the same 64K segment as the above; +tidt: + .word 0 # idt limit = 0 + .word 0, 0 # idt base = 0L + + # Duplicate the global descriptor table + # so the kernel can live anywhere + .balign 4 +tgdt: + .short tgdt_end - tgdt # gdt limit + .long tgdt - r_base + .short 0 + .quad 0x00cf9b000000ffff # __KERNEL32_CS + .quad 0x00af9b000000ffff # __KERNEL_CS + .quad 0x00cf93000000ffff # __KERNEL_DS +tgdt_end: + + .balign 4 +startup_32_vector: + .long startup_32 - r_base + .word __KERNEL32_CS, 0 + + .balign 4 +startup_64_vector: + .long startup_64 - r_base + .word __KERNEL_CS, 0 + +trampoline_stack: + .org 0x1000 +trampoline_stack_end: +ENTRY(trampoline_level4_pgt) + .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE + .fill 510,8,0 + .quad level3_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE + +ENTRY(trampoline_end) -- cgit v1.2.3