From cdc1cb0d4445f39561a65204d26f89365f917550 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 3 Apr 2009 17:15:14 -0700 Subject: x86: make wakeup_secondary_cpu_via_init static Impact: cleanup Signed-off-by: Yinghai Lu LKML-Reference: <49D6A692.6040400@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/kernel/smpboot.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 58d24ef917d..bddf2ccaf32 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -538,7 +538,7 @@ wakeup_secondary_cpu_via_nmi(int logical_apicid, unsigned long start_eip) return (send_status | accept_status); } -int __devinit +static int __devinit wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip) { unsigned long send_status, accept_status = 0; -- cgit v1.2.3 From 02421f98ec55c3ff118f358740ff640f096c7ad6 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 3 Apr 2009 17:15:53 -0700 Subject: x86: consistent about warm_reset_vector for UN_NON_UNIQUE_APIC Impact: cleanup didn't set it for UV_NON_UNIQUE_APIC, so don't restore it Signed-off-by: Yinghai Lu LKML-Reference: <49D6A6B9.6060501@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/kernel/smpboot.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index bddf2ccaf32..bf8ad6344b1 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -822,10 +822,12 @@ do_rest: /* mark "stuck" area as not stuck */ *((volatile unsigned long *)trampoline_base) = 0; - /* - * Cleanup possible dangling ends... - */ - smpboot_restore_warm_reset_vector(); + if (get_uv_system_type() != UV_NON_UNIQUE_APIC) { + /* + * Cleanup possible dangling ends... + */ + smpboot_restore_warm_reset_vector(); + } return boot_error; } -- cgit v1.2.3 From e85abf8f432bb2a13733ab7609fbb8e1500af51d Mon Sep 17 00:00:00 2001 From: Gary Hade Date: Wed, 8 Apr 2009 14:07:25 -0700 Subject: x86: consolidate SMP code in io_apic.c Impact: Cleanup Reorganizes the code in arch/x86/kernel/io_apic.c by combining two '#ifdef CONFIG_SMP' regions. In addition to making the code easier to understand the first '#ifdef CONFIG_SMP' region is moved to a location later in the file which will reduce the need for function forward declarations when the code subsequently revised. The only changes other than relocating code to a different position in the file were the removal of the assign_irq_vector() forward declaration which was no longer needed and some line length reduction formatting changes. Signed-off-by: Gary Hade Cc: lcm@us.ibm.com LKML-Reference: <20090408210725.GC11159@us.ibm.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/io_apic.c | 223 ++++++++++++++++++++--------------------- 1 file changed, 109 insertions(+), 114 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 767fe7e46d6..7c9d045ac83 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -518,120 +518,6 @@ static void ioapic_mask_entry(int apic, int pin) spin_unlock_irqrestore(&ioapic_lock, flags); } -#ifdef CONFIG_SMP -static void send_cleanup_vector(struct irq_cfg *cfg) -{ - cpumask_var_t cleanup_mask; - - if (unlikely(!alloc_cpumask_var(&cleanup_mask, GFP_ATOMIC))) { - unsigned int i; - cfg->move_cleanup_count = 0; - for_each_cpu_and(i, cfg->old_domain, cpu_online_mask) - cfg->move_cleanup_count++; - for_each_cpu_and(i, cfg->old_domain, cpu_online_mask) - apic->send_IPI_mask(cpumask_of(i), IRQ_MOVE_CLEANUP_VECTOR); - } else { - cpumask_and(cleanup_mask, cfg->old_domain, cpu_online_mask); - cfg->move_cleanup_count = cpumask_weight(cleanup_mask); - apic->send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR); - free_cpumask_var(cleanup_mask); - } - cfg->move_in_progress = 0; -} - -static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq_cfg *cfg) -{ - int apic, pin; - struct irq_pin_list *entry; - u8 vector = cfg->vector; - - entry = cfg->irq_2_pin; - for (;;) { - unsigned int reg; - - if (!entry) - break; - - apic = entry->apic; - pin = entry->pin; - /* - * With interrupt-remapping, destination information comes - * from interrupt-remapping table entry. - */ - if (!irq_remapped(irq)) - io_apic_write(apic, 0x11 + pin*2, dest); - reg = io_apic_read(apic, 0x10 + pin*2); - reg &= ~IO_APIC_REDIR_VECTOR_MASK; - reg |= vector; - io_apic_modify(apic, 0x10 + pin*2, reg); - if (!entry->next) - break; - entry = entry->next; - } -} - -static int -assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask); - -/* - * Either sets desc->affinity to a valid value, and returns - * ->cpu_mask_to_apicid of that, or returns BAD_APICID and - * leaves desc->affinity untouched. - */ -static unsigned int -set_desc_affinity(struct irq_desc *desc, const struct cpumask *mask) -{ - struct irq_cfg *cfg; - unsigned int irq; - - if (!cpumask_intersects(mask, cpu_online_mask)) - return BAD_APICID; - - irq = desc->irq; - cfg = desc->chip_data; - if (assign_irq_vector(irq, cfg, mask)) - return BAD_APICID; - - /* check that before desc->addinity get updated */ - set_extra_move_desc(desc, mask); - - cpumask_copy(desc->affinity, mask); - - return apic->cpu_mask_to_apicid_and(desc->affinity, cfg->domain); -} - -static void -set_ioapic_affinity_irq_desc(struct irq_desc *desc, const struct cpumask *mask) -{ - struct irq_cfg *cfg; - unsigned long flags; - unsigned int dest; - unsigned int irq; - - irq = desc->irq; - cfg = desc->chip_data; - - spin_lock_irqsave(&ioapic_lock, flags); - dest = set_desc_affinity(desc, mask); - if (dest != BAD_APICID) { - /* Only the high 8 bits are valid. */ - dest = SET_APIC_LOGICAL_ID(dest); - __target_IO_APIC_irq(irq, dest, cfg); - } - spin_unlock_irqrestore(&ioapic_lock, flags); -} - -static void -set_ioapic_affinity_irq(unsigned int irq, const struct cpumask *mask) -{ - struct irq_desc *desc; - - desc = irq_to_desc(irq); - - set_ioapic_affinity_irq_desc(desc, mask); -} -#endif /* CONFIG_SMP */ - /* * The common case is 1:1 IRQ<->pin mappings. Sometimes there are * shared ISA-space IRQs, so we have to support them. We are super @@ -2360,6 +2246,115 @@ static int ioapic_retrigger_irq(unsigned int irq) */ #ifdef CONFIG_SMP +static void send_cleanup_vector(struct irq_cfg *cfg) +{ + cpumask_var_t cleanup_mask; + + if (unlikely(!alloc_cpumask_var(&cleanup_mask, GFP_ATOMIC))) { + unsigned int i; + cfg->move_cleanup_count = 0; + for_each_cpu_and(i, cfg->old_domain, cpu_online_mask) + cfg->move_cleanup_count++; + for_each_cpu_and(i, cfg->old_domain, cpu_online_mask) + apic->send_IPI_mask(cpumask_of(i), IRQ_MOVE_CLEANUP_VECTOR); + } else { + cpumask_and(cleanup_mask, cfg->old_domain, cpu_online_mask); + cfg->move_cleanup_count = cpumask_weight(cleanup_mask); + apic->send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR); + free_cpumask_var(cleanup_mask); + } + cfg->move_in_progress = 0; +} + +static void +__target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq_cfg *cfg) +{ + int apic, pin; + struct irq_pin_list *entry; + u8 vector = cfg->vector; + + entry = cfg->irq_2_pin; + for (;;) { + unsigned int reg; + + if (!entry) + break; + + apic = entry->apic; + pin = entry->pin; + /* + * With interrupt-remapping, destination information comes + * from interrupt-remapping table entry. + */ + if (!irq_remapped(irq)) + io_apic_write(apic, 0x11 + pin*2, dest); + reg = io_apic_read(apic, 0x10 + pin*2); + reg &= ~IO_APIC_REDIR_VECTOR_MASK; + reg |= vector; + io_apic_modify(apic, 0x10 + pin*2, reg); + if (!entry->next) + break; + entry = entry->next; + } +} + +/* + * Either sets desc->affinity to a valid value, and returns + * ->cpu_mask_to_apicid of that, or returns BAD_APICID and + * leaves desc->affinity untouched. + */ +static unsigned int +set_desc_affinity(struct irq_desc *desc, const struct cpumask *mask) +{ + struct irq_cfg *cfg; + unsigned int irq; + + if (!cpumask_intersects(mask, cpu_online_mask)) + return BAD_APICID; + + irq = desc->irq; + cfg = desc->chip_data; + if (assign_irq_vector(irq, cfg, mask)) + return BAD_APICID; + + /* check that before desc->addinity get updated */ + set_extra_move_desc(desc, mask); + + cpumask_copy(desc->affinity, mask); + + return apic->cpu_mask_to_apicid_and(desc->affinity, cfg->domain); +} + +static void +set_ioapic_affinity_irq_desc(struct irq_desc *desc, const struct cpumask *mask) +{ + struct irq_cfg *cfg; + unsigned long flags; + unsigned int dest; + unsigned int irq; + + irq = desc->irq; + cfg = desc->chip_data; + + spin_lock_irqsave(&ioapic_lock, flags); + dest = set_desc_affinity(desc, mask); + if (dest != BAD_APICID) { + /* Only the high 8 bits are valid. */ + dest = SET_APIC_LOGICAL_ID(dest); + __target_IO_APIC_irq(irq, dest, cfg); + } + spin_unlock_irqrestore(&ioapic_lock, flags); +} + +static void +set_ioapic_affinity_irq(unsigned int irq, const struct cpumask *mask) +{ + struct irq_desc *desc; + + desc = irq_to_desc(irq); + + set_ioapic_affinity_irq_desc(desc, mask); +} #ifdef CONFIG_INTR_REMAP -- cgit v1.2.3 From f465145235313c451164bdfa9037ac254bf00c9a Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Thu, 9 Apr 2009 11:52:18 +0300 Subject: x86: move x86_quirk_pre_intr_init() to irqinit_32.c Impact: cleanup In preparation for unifying irqinit_{32,64}.c, make x86_quirk_pre_intr_init() local to irqinit_32.c. Reviewed-by Cyrill Gorcunov Signed-off-by: Pekka Enberg Signed-off-by: Ingo Molnar --- arch/x86/include/asm/i8259.h | 4 ---- arch/x86/include/asm/setup.h | 1 - arch/x86/kernel/irqinit_32.c | 20 +++++++++++++++++++- arch/x86/kernel/setup.c | 18 ------------------ 4 files changed, 19 insertions(+), 24 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/i8259.h b/arch/x86/include/asm/i8259.h index 1a99e6c092a..58d7091eeb1 100644 --- a/arch/x86/include/asm/i8259.h +++ b/arch/x86/include/asm/i8259.h @@ -60,8 +60,4 @@ extern struct irq_chip i8259A_chip; extern void mask_8259A(void); extern void unmask_8259A(void); -#ifdef CONFIG_X86_32 -extern void init_ISA_irqs(void); -#endif - #endif /* _ASM_X86_I8259_H */ diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h index bdc2ada05ae..4093d1ed6db 100644 --- a/arch/x86/include/asm/setup.h +++ b/arch/x86/include/asm/setup.h @@ -33,7 +33,6 @@ struct x86_quirks { int (*setup_ioapic_ids)(void); }; -extern void x86_quirk_pre_intr_init(void); extern void x86_quirk_intr_init(void); extern void x86_quirk_trap_init(void); diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit_32.c index 368b0a8836f..0c0dedccd03 100644 --- a/arch/x86/kernel/irqinit_32.c +++ b/arch/x86/kernel/irqinit_32.c @@ -53,7 +53,7 @@ static struct irqaction fpu_irq = { .name = "fpu", }; -void __init init_ISA_irqs(void) +static void __init init_ISA_irqs(void) { int i; @@ -121,6 +121,24 @@ int vector_used_by_percpu_irq(unsigned int vector) /* Overridden in paravirt.c */ void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); +/** + * x86_quirk_pre_intr_init - initialisation prior to setting up interrupt vectors + * + * Description: + * Perform any necessary interrupt initialisation prior to setting up + * the "ordinary" interrupt call gates. For legacy reasons, the ISA + * interrupts should be initialised here if the machine emulates a PC + * in any way. + **/ +static void __init x86_quirk_pre_intr_init(void) +{ + if (x86_quirks->arch_pre_intr_init) { + if (x86_quirks->arch_pre_intr_init()) + return; + } + init_ISA_irqs(); +} + void __init native_init_IRQ(void) { int i; diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index b4158439bf6..523bb697120 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -996,24 +996,6 @@ void __init setup_arch(char **cmdline_p) #ifdef CONFIG_X86_32 -/** - * x86_quirk_pre_intr_init - initialisation prior to setting up interrupt vectors - * - * Description: - * Perform any necessary interrupt initialisation prior to setting up - * the "ordinary" interrupt call gates. For legacy reasons, the ISA - * interrupts should be initialised here if the machine emulates a PC - * in any way. - **/ -void __init x86_quirk_pre_intr_init(void) -{ - if (x86_quirks->arch_pre_intr_init) { - if (x86_quirks->arch_pre_intr_init()) - return; - } - init_ISA_irqs(); -} - /** * x86_quirk_intr_init - post gate setup interrupt initialisation * -- cgit v1.2.3 From 7371d9fcb88dc9185be9719f64744a339c537a92 Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Thu, 9 Apr 2009 11:52:19 +0300 Subject: x86: move init_ISA_irqs() in irqinit_32.c to match ordering in irqinit_64.c Impact: cleanup Reviewed-by Cyrill Gorcunov Signed-off-by: Pekka Enberg Signed-off-by: Ingo Molnar --- arch/x86/kernel/irqinit_32.c | 48 ++++++++++++++++++++++---------------------- 1 file changed, 24 insertions(+), 24 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit_32.c index 0c0dedccd03..c5cb769db7b 100644 --- a/arch/x86/kernel/irqinit_32.c +++ b/arch/x86/kernel/irqinit_32.c @@ -53,30 +53,6 @@ static struct irqaction fpu_irq = { .name = "fpu", }; -static void __init init_ISA_irqs(void) -{ - int i; - -#ifdef CONFIG_X86_LOCAL_APIC - init_bsp_APIC(); -#endif - init_8259A(0); - - /* - * 16 old-style INTA-cycle interrupts: - */ - for (i = 0; i < NR_IRQS_LEGACY; i++) { - struct irq_desc *desc = irq_to_desc(i); - - desc->status = IRQ_DISABLED; - desc->action = NULL; - desc->depth = 1; - - set_irq_chip_and_handler_name(i, &i8259A_chip, - handle_level_irq, "XT"); - } -} - /* * IRQ2 is cascade interrupt to second interrupt controller */ @@ -118,6 +94,30 @@ int vector_used_by_percpu_irq(unsigned int vector) return 0; } +static void __init init_ISA_irqs(void) +{ + int i; + +#ifdef CONFIG_X86_LOCAL_APIC + init_bsp_APIC(); +#endif + init_8259A(0); + + /* + * 16 old-style INTA-cycle interrupts: + */ + for (i = 0; i < NR_IRQS_LEGACY; i++) { + struct irq_desc *desc = irq_to_desc(i); + + desc->status = IRQ_DISABLED; + desc->action = NULL; + desc->depth = 1; + + set_irq_chip_and_handler_name(i, &i8259A_chip, + handle_level_irq, "XT"); + } +} + /* Overridden in paravirt.c */ void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); -- cgit v1.2.3 From 36290d87f5abf260a543e5b711be4ceed03e6b1a Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Thu, 9 Apr 2009 11:52:20 +0300 Subject: x86: introduce smp_intr_init() in irqinit_32.c Impact: cleanup Reviewed-by Cyrill Gorcunov Signed-off-by: Pekka Enberg Signed-off-by: Ingo Molnar --- arch/x86/kernel/irqinit_32.c | 61 ++++++++++++++++++++++++-------------------- 1 file changed, 33 insertions(+), 28 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit_32.c index c5cb769db7b..df0aad5a062 100644 --- a/arch/x86/kernel/irqinit_32.c +++ b/arch/x86/kernel/irqinit_32.c @@ -121,6 +121,38 @@ static void __init init_ISA_irqs(void) /* Overridden in paravirt.c */ void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); +static void __init smp_intr_init(void) +{ +#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_SMP) + /* + * The reschedule interrupt is a CPU-to-CPU reschedule-helper + * IPI, driven by wakeup. + */ + alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); + + /* IPIs for invalidation */ + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); + + /* IPI for generic function call */ + alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); + + /* IPI for single call function */ + alloc_intr_gate(CALL_FUNCTION_SINGLE_VECTOR, + call_function_single_interrupt); + + /* Low priority IPI to cleanup after moving an irq */ + set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt); + set_bit(IRQ_MOVE_CLEANUP_VECTOR, used_vectors); +#endif +} + /** * x86_quirk_pre_intr_init - initialisation prior to setting up interrupt vectors * @@ -158,34 +190,7 @@ void __init native_init_IRQ(void) } -#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_SMP) - /* - * The reschedule interrupt is a CPU-to-CPU reschedule-helper - * IPI, driven by wakeup. - */ - alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); - - /* IPIs for invalidation */ - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); - - /* IPI for generic function call */ - alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); - - /* IPI for single call function */ - alloc_intr_gate(CALL_FUNCTION_SINGLE_VECTOR, - call_function_single_interrupt); - - /* Low priority IPI to cleanup after moving an irq */ - set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt); - set_bit(IRQ_MOVE_CLEANUP_VECTOR, used_vectors); -#endif + smp_intr_init(); #ifdef CONFIG_X86_LOCAL_APIC /* self generated IPI for local APIC timer */ -- cgit v1.2.3 From 22813c45228160b07244a7c4ed7580388ac0f33d Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Thu, 9 Apr 2009 11:52:21 +0300 Subject: x86: introduce apic_intr_init() in irqinit_32.c Impact: cleanup Reviewed-by Cyrill Gorcunov Signed-off-by: Pekka Enberg Signed-off-by: Ingo Molnar --- arch/x86/kernel/irqinit_32.c | 40 ++++++++++++++++++++++------------------ 1 file changed, 22 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit_32.c index df0aad5a062..9ba68c4557b 100644 --- a/arch/x86/kernel/irqinit_32.c +++ b/arch/x86/kernel/irqinit_32.c @@ -171,25 +171,8 @@ static void __init x86_quirk_pre_intr_init(void) init_ISA_irqs(); } -void __init native_init_IRQ(void) +static void __init apic_intr_init(void) { - int i; - - /* Execute any quirks before the call gates are initialised: */ - x86_quirk_pre_intr_init(); - - /* - * Cover the whole vector space, no vector can escape - * us. (some of these will be overridden and become - * 'special' SMP interrupts) - */ - for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) { - /* SYSCALL_VECTOR was reserved in trap_init. */ - if (i != SYSCALL_VECTOR) - set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]); - } - - smp_intr_init(); #ifdef CONFIG_X86_LOCAL_APIC @@ -208,6 +191,27 @@ void __init native_init_IRQ(void) /* thermal monitor LVT interrupt */ alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); #endif +} + +void __init native_init_IRQ(void) +{ + int i; + + /* Execute any quirks before the call gates are initialised: */ + x86_quirk_pre_intr_init(); + + /* + * Cover the whole vector space, no vector can escape + * us. (some of these will be overridden and become + * 'special' SMP interrupts) + */ + for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) { + /* SYSCALL_VECTOR was reserved in trap_init. */ + if (i != SYSCALL_VECTOR) + set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]); + } + + apic_intr_init(); if (!acpi_ioapic) setup_irq(2, &irq2); -- cgit v1.2.3 From d3496c85cae22fb7713af6ed542a6aeae8ee4210 Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Thu, 9 Apr 2009 11:52:22 +0300 Subject: x86: use identical loop constructs in 32-bit and 64-bit native_init_IRQ() Impact: cleanup Reviewed-by Cyrill Gorcunov Signed-off-by: Pekka Enberg Signed-off-by: Ingo Molnar --- arch/x86/kernel/irqinit_32.c | 2 +- arch/x86/kernel/irqinit_64.c | 9 +++++---- 2 files changed, 6 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit_32.c index 9ba68c4557b..1029a1855f9 100644 --- a/arch/x86/kernel/irqinit_32.c +++ b/arch/x86/kernel/irqinit_32.c @@ -205,7 +205,7 @@ void __init native_init_IRQ(void) * us. (some of these will be overridden and become * 'special' SMP interrupts) */ - for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) { + for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) { /* SYSCALL_VECTOR was reserved in trap_init. */ if (i != SYSCALL_VECTOR) set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]); diff --git a/arch/x86/kernel/irqinit_64.c b/arch/x86/kernel/irqinit_64.c index 8cd10537fd4..1c8858bb27f 100644 --- a/arch/x86/kernel/irqinit_64.c +++ b/arch/x86/kernel/irqinit_64.c @@ -159,15 +159,16 @@ void __init native_init_IRQ(void) int i; init_ISA_irqs(); + /* * Cover the whole vector space, no vector can escape * us. (some of these will be overridden and become * 'special' SMP interrupts) */ - for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { - int vector = FIRST_EXTERNAL_VECTOR + i; - if (vector != IA32_SYSCALL_VECTOR) - set_intr_gate(vector, interrupt[i]); + for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) { + /* IA32_SYSCALL_VECTOR was reserved in trap_init. */ + if (i != IA32_SYSCALL_VECTOR) + set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]); } apic_intr_init(); -- cgit v1.2.3 From b0096bb0b640d0a7713618b3472fd0f4adf30a96 Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Thu, 9 Apr 2009 11:52:23 +0300 Subject: x86: unify smp_intr_init() in irqinit_{32,64}.h Impact: cleanup Reviewed-by Cyrill Gorcunov Signed-off-by: Pekka Enberg Signed-off-by: Ingo Molnar --- arch/x86/kernel/irqinit_32.c | 8 +++++--- arch/x86/kernel/irqinit_64.c | 2 ++ 2 files changed, 7 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit_32.c index 1029a1855f9..ef2528d298b 100644 --- a/arch/x86/kernel/irqinit_32.c +++ b/arch/x86/kernel/irqinit_32.c @@ -123,7 +123,8 @@ void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); static void __init smp_intr_init(void) { -#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_SMP) +#ifdef CONFIG_SMP +#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC) /* * The reschedule interrupt is a CPU-to-CPU reschedule-helper * IPI, driven by wakeup. @@ -143,14 +144,15 @@ static void __init smp_intr_init(void) /* IPI for generic function call */ alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); - /* IPI for single call function */ + /* IPI for generic single function call */ alloc_intr_gate(CALL_FUNCTION_SINGLE_VECTOR, - call_function_single_interrupt); + call_function_single_interrupt); /* Low priority IPI to cleanup after moving an irq */ set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt); set_bit(IRQ_MOVE_CLEANUP_VECTOR, used_vectors); #endif +#endif /* CONFIG_SMP */ } /** diff --git a/arch/x86/kernel/irqinit_64.c b/arch/x86/kernel/irqinit_64.c index 1c8858bb27f..9e7c57dc79e 100644 --- a/arch/x86/kernel/irqinit_64.c +++ b/arch/x86/kernel/irqinit_64.c @@ -107,6 +107,7 @@ void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); static void __init smp_intr_init(void) { #ifdef CONFIG_SMP +#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC) /* * The reschedule interrupt is a CPU-to-CPU reschedule-helper * IPI, driven by wakeup. @@ -134,6 +135,7 @@ static void __init smp_intr_init(void) set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt); set_bit(IRQ_MOVE_CLEANUP_VECTOR, used_vectors); #endif +#endif /* CONFIG_SMP */ } static void __init apic_intr_init(void) -- cgit v1.2.3 From 598c73d250ffb112715aa48fb325d79e255be23b Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Thu, 9 Apr 2009 11:52:24 +0300 Subject: x86: unify init_ISA_irqs() in irqinit_{32,64}.c Impact: cleanup Reviewed-by Cyrill Gorcunov Signed-off-by: Pekka Enberg Signed-off-by: Ingo Molnar --- arch/x86/kernel/irqinit_32.c | 2 +- arch/x86/kernel/irqinit_64.c | 10 ++++++---- 2 files changed, 7 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit_32.c index ef2528d298b..4488b713396 100644 --- a/arch/x86/kernel/irqinit_32.c +++ b/arch/x86/kernel/irqinit_32.c @@ -98,7 +98,7 @@ static void __init init_ISA_irqs(void) { int i; -#ifdef CONFIG_X86_LOCAL_APIC +#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC) init_bsp_APIC(); #endif init_8259A(0); diff --git a/arch/x86/kernel/irqinit_64.c b/arch/x86/kernel/irqinit_64.c index 9e7c57dc79e..61c9a922e80 100644 --- a/arch/x86/kernel/irqinit_64.c +++ b/arch/x86/kernel/irqinit_64.c @@ -84,9 +84,14 @@ static void __init init_ISA_irqs(void) { int i; +#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC) init_bsp_APIC(); +#endif init_8259A(0); + /* + * 16 old-style INTA-cycle interrupts: + */ for (i = 0; i < NR_IRQS_LEGACY; i++) { struct irq_desc *desc = irq_to_desc(i); @@ -94,11 +99,8 @@ static void __init init_ISA_irqs(void) desc->action = NULL; desc->depth = 1; - /* - * 16 old-style INTA-cycle interrupts: - */ set_irq_chip_and_handler_name(i, &i8259A_chip, - handle_level_irq, "XT"); + handle_level_irq, "XT"); } } -- cgit v1.2.3 From 320fd99672a44ece6d1cd0d838ba31c8ebbf5979 Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Thu, 9 Apr 2009 11:52:25 +0300 Subject: x86: unify native_init_IRQ() in irqinit_{32,64}.c Impact: cleanup Reviewed-by Cyrill Gorcunov Signed-off-by: Pekka Enberg Signed-off-by: Ingo Molnar --- arch/x86/kernel/irqinit_32.c | 53 ++++++++++++++++++---------- arch/x86/kernel/irqinit_64.c | 82 +++++++++++++++++++++++++++++++++++++++++++- 2 files changed, 115 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit_32.c index 4488b713396..a780de3ad5d 100644 --- a/arch/x86/kernel/irqinit_32.c +++ b/arch/x86/kernel/irqinit_32.c @@ -22,7 +22,7 @@ #include #include - +#ifdef CONFIG_X86_32 /* * Note that on a 486, we don't want to do a SIGFPE on an irq13 * as the irq is unreliable, and exception 16 works correctly @@ -52,6 +52,7 @@ static struct irqaction fpu_irq = { .handler = math_error_irq, .name = "fpu", }; +#endif /* * IRQ2 is cascade interrupt to second interrupt controller @@ -155,24 +156,6 @@ static void __init smp_intr_init(void) #endif /* CONFIG_SMP */ } -/** - * x86_quirk_pre_intr_init - initialisation prior to setting up interrupt vectors - * - * Description: - * Perform any necessary interrupt initialisation prior to setting up - * the "ordinary" interrupt call gates. For legacy reasons, the ISA - * interrupts should be initialised here if the machine emulates a PC - * in any way. - **/ -static void __init x86_quirk_pre_intr_init(void) -{ - if (x86_quirks->arch_pre_intr_init) { - if (x86_quirks->arch_pre_intr_init()) - return; - } - init_ISA_irqs(); -} - static void __init apic_intr_init(void) { smp_intr_init(); @@ -195,12 +178,36 @@ static void __init apic_intr_init(void) #endif } +#ifdef CONFIG_X86_32 +/** + * x86_quirk_pre_intr_init - initialisation prior to setting up interrupt vectors + * + * Description: + * Perform any necessary interrupt initialisation prior to setting up + * the "ordinary" interrupt call gates. For legacy reasons, the ISA + * interrupts should be initialised here if the machine emulates a PC + * in any way. + **/ +static void __init x86_quirk_pre_intr_init(void) +{ + if (x86_quirks->arch_pre_intr_init) { + if (x86_quirks->arch_pre_intr_init()) + return; + } + init_ISA_irqs(); +} +#endif + void __init native_init_IRQ(void) { int i; +#ifdef CONFIG_X86_32 /* Execute any quirks before the call gates are initialised: */ x86_quirk_pre_intr_init(); +#else + init_ISA_irqs(); +#endif /* * Cover the whole vector space, no vector can escape @@ -208,9 +215,15 @@ void __init native_init_IRQ(void) * 'special' SMP interrupts) */ for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) { +#ifdef CONFIG_X86_32 /* SYSCALL_VECTOR was reserved in trap_init. */ if (i != SYSCALL_VECTOR) set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]); +#else + /* IA32_SYSCALL_VECTOR was reserved in trap_init. */ + if (i != IA32_SYSCALL_VECTOR) + set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]); +#endif } apic_intr_init(); @@ -218,6 +231,7 @@ void __init native_init_IRQ(void) if (!acpi_ioapic) setup_irq(2, &irq2); +#ifdef CONFIG_X86_32 /* * Call quirks after call gates are initialised (usually add in * the architecture specific gates): @@ -232,4 +246,5 @@ void __init native_init_IRQ(void) setup_irq(FPU_IRQ, &fpu_irq); irq_ctx_init(smp_processor_id()); +#endif } diff --git a/arch/x86/kernel/irqinit_64.c b/arch/x86/kernel/irqinit_64.c index 61c9a922e80..ed50e35ce97 100644 --- a/arch/x86/kernel/irqinit_64.c +++ b/arch/x86/kernel/irqinit_64.c @@ -39,14 +39,46 @@ * (these are usually mapped into the 0x30-0xff vector range) */ +#ifdef CONFIG_X86_32 /* - * IRQ2 is cascade interrupt to second interrupt controller + * Note that on a 486, we don't want to do a SIGFPE on an irq13 + * as the irq is unreliable, and exception 16 works correctly + * (ie as explained in the intel literature). On a 386, you + * can't use exception 16 due to bad IBM design, so we have to + * rely on the less exact irq13. + * + * Careful.. Not only is IRQ13 unreliable, but it is also + * leads to races. IBM designers who came up with it should + * be shot. + */ + +static irqreturn_t math_error_irq(int cpl, void *dev_id) +{ + outb(0, 0xF0); + if (ignore_fpu_irq || !boot_cpu_data.hard_math) + return IRQ_NONE; + math_error((void __user *)get_irq_regs()->ip); + return IRQ_HANDLED; +} + +/* + * New motherboards sometimes make IRQ 13 be a PCI interrupt, + * so allow interrupt sharing. */ +static struct irqaction fpu_irq = { + .handler = math_error_irq, + .name = "fpu", +}; +#endif +/* + * IRQ2 is cascade interrupt to second interrupt controller + */ static struct irqaction irq2 = { .handler = no_action, .name = "cascade", }; + DEFINE_PER_CPU(vector_irq_t, vector_irq) = { [0 ... IRQ0_VECTOR - 1] = -1, [IRQ0_VECTOR] = 0, @@ -158,11 +190,36 @@ static void __init apic_intr_init(void) alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt); } +#ifdef CONFIG_X86_32 +/** + * x86_quirk_pre_intr_init - initialisation prior to setting up interrupt vectors + * + * Description: + * Perform any necessary interrupt initialisation prior to setting up + * the "ordinary" interrupt call gates. For legacy reasons, the ISA + * interrupts should be initialised here if the machine emulates a PC + * in any way. + **/ +static void __init x86_quirk_pre_intr_init(void) +{ + if (x86_quirks->arch_pre_intr_init) { + if (x86_quirks->arch_pre_intr_init()) + return; + } + init_ISA_irqs(); +} +#endif + void __init native_init_IRQ(void) { int i; +#ifdef CONFIG_X86_32 + /* Execute any quirks before the call gates are initialised: */ + x86_quirk_pre_intr_init(); +#else init_ISA_irqs(); +#endif /* * Cover the whole vector space, no vector can escape @@ -170,13 +227,36 @@ void __init native_init_IRQ(void) * 'special' SMP interrupts) */ for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) { +#ifdef CONFIG_X86_32 + /* SYSCALL_VECTOR was reserved in trap_init. */ + if (i != SYSCALL_VECTOR) + set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]); +#else /* IA32_SYSCALL_VECTOR was reserved in trap_init. */ if (i != IA32_SYSCALL_VECTOR) set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]); +#endif } apic_intr_init(); if (!acpi_ioapic) setup_irq(2, &irq2); + +#ifdef CONFIG_X86_32 + /* + * Call quirks after call gates are initialised (usually add in + * the architecture specific gates): + */ + x86_quirk_intr_init(); + + /* + * External FPU? Set up irq13 if so, for + * original braindamaged IBM FERR coupling. + */ + if (boot_cpu_data.hard_math && !cpu_has_fpu) + setup_irq(FPU_IRQ, &fpu_irq); + + irq_ctx_init(smp_processor_id()); +#endif } -- cgit v1.2.3 From 778838600eb6973bdb6fd11e7f91b43cea4d6f45 Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Thu, 9 Apr 2009 11:52:26 +0300 Subject: x86: unify trivial differences in irqinit_{32,64}.c Impact: cleanup Reviewed-by Cyrill Gorcunov Signed-off-by: Pekka Enberg Signed-off-by: Ingo Molnar --- arch/x86/kernel/irqinit_32.c | 20 ++++++++++++++++++++ arch/x86/kernel/irqinit_64.c | 4 ++++ 2 files changed, 24 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit_32.c index a780de3ad5d..72ce94268d3 100644 --- a/arch/x86/kernel/irqinit_32.c +++ b/arch/x86/kernel/irqinit_32.c @@ -1,20 +1,24 @@ +#include #include #include #include #include #include +#include #include #include #include #include #include #include +#include #include #include #include #include #include +#include #include #include #include @@ -22,6 +26,22 @@ #include #include +/* + * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts: + * (these are usually mapped to vectors 0x30-0x3f) + */ + +/* + * The IO-APIC gives us many more interrupt sources. Most of these + * are unused but an SMP system is supposed to have enough memory ... + * sometimes (mostly wrt. hw bugs) we get corrupted vectors all + * across the spectrum, so we really want to be prepared to get all + * of these. Plus, more powerful systems might have more than 64 + * IO-APIC registers. + * + * (these are usually mapped into the 0x30-0xff vector range) + */ + #ifdef CONFIG_X86_32 /* * Note that on a 486, we don't want to do a SIGFPE on an irq13 diff --git a/arch/x86/kernel/irqinit_64.c b/arch/x86/kernel/irqinit_64.c index ed50e35ce97..687b6c33cd7 100644 --- a/arch/x86/kernel/irqinit_64.c +++ b/arch/x86/kernel/irqinit_64.c @@ -17,11 +17,14 @@ #include #include +#include #include #include #include #include +#include #include +#include /* * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts: @@ -136,6 +139,7 @@ static void __init init_ISA_irqs(void) } } +/* Overridden in paravirt.c */ void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); static void __init smp_intr_init(void) -- cgit v1.2.3 From ab19c25abd14db28d7454f00805ea59f22ed6057 Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Thu, 9 Apr 2009 11:52:27 +0300 Subject: x86: unify apic_intr_init() in irqinit_{32,64}.c Impact: cleanup Reviewed-by Cyrill Gorcunov Signed-off-by: Pekka Enberg Signed-off-by: Ingo Molnar --- arch/x86/kernel/irqinit_32.c | 9 ++++++++- arch/x86/kernel/irqinit_64.c | 11 +++++++++++ 2 files changed, 19 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit_32.c index 72ce94268d3..f3be5e97427 100644 --- a/arch/x86/kernel/irqinit_32.c +++ b/arch/x86/kernel/irqinit_32.c @@ -180,7 +180,12 @@ static void __init apic_intr_init(void) { smp_intr_init(); -#ifdef CONFIG_X86_LOCAL_APIC +#ifdef CONFIG_X86_64 + alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); + alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); +#endif + +#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC) /* self generated IPI for local APIC timer */ alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); @@ -192,10 +197,12 @@ static void __init apic_intr_init(void) alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt); #endif +#ifdef CONFIG_X86_32 #if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_MCE_P4THERMAL) /* thermal monitor LVT interrupt */ alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); #endif +#endif } #ifdef CONFIG_X86_32 diff --git a/arch/x86/kernel/irqinit_64.c b/arch/x86/kernel/irqinit_64.c index 687b6c33cd7..f3be5e97427 100644 --- a/arch/x86/kernel/irqinit_64.c +++ b/arch/x86/kernel/irqinit_64.c @@ -180,9 +180,12 @@ static void __init apic_intr_init(void) { smp_intr_init(); +#ifdef CONFIG_X86_64 alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); +#endif +#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC) /* self generated IPI for local APIC timer */ alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); @@ -192,6 +195,14 @@ static void __init apic_intr_init(void) /* IPI vectors for APIC spurious and error interrupts */ alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt); +#endif + +#ifdef CONFIG_X86_32 +#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_MCE_P4THERMAL) + /* thermal monitor LVT interrupt */ + alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); +#endif +#endif } #ifdef CONFIG_X86_32 -- cgit v1.2.3 From 31cb45ef2600d47191d51253ec94b5e3f689260d Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Thu, 9 Apr 2009 11:52:28 +0300 Subject: x86: unify irqinit_{32,64}.c into irqinit.c Impact: cleanup Reviewed-by Cyrill Gorcunov Signed-off-by: Pekka Enberg Signed-off-by: Ingo Molnar --- arch/x86/kernel/Makefile | 2 +- arch/x86/kernel/irqinit.c | 277 +++++++++++++++++++++++++++++++++++++++++++ arch/x86/kernel/irqinit_32.c | 277 ------------------------------------------- arch/x86/kernel/irqinit_64.c | 277 ------------------------------------------- 4 files changed, 278 insertions(+), 555 deletions(-) create mode 100644 arch/x86/kernel/irqinit.c delete mode 100644 arch/x86/kernel/irqinit_32.c delete mode 100644 arch/x86/kernel/irqinit_64.c (limited to 'arch') diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 145cce75cda..16e3acfe19e 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -28,7 +28,7 @@ CFLAGS_paravirt.o := $(nostackp) obj-y := process_$(BITS).o signal.o entry_$(BITS).o obj-y += traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o obj-y += time_$(BITS).o ioport.o ldt.o dumpstack.o -obj-y += setup.o i8259.o irqinit_$(BITS).o +obj-y += setup.o i8259.o irqinit.o obj-$(CONFIG_X86_VISWS) += visws_quirks.o obj-$(CONFIG_X86_32) += probe_roms_32.o obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c new file mode 100644 index 00000000000..f3be5e97427 --- /dev/null +++ b/arch/x86/kernel/irqinit.c @@ -0,0 +1,277 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts: + * (these are usually mapped to vectors 0x30-0x3f) + */ + +/* + * The IO-APIC gives us many more interrupt sources. Most of these + * are unused but an SMP system is supposed to have enough memory ... + * sometimes (mostly wrt. hw bugs) we get corrupted vectors all + * across the spectrum, so we really want to be prepared to get all + * of these. Plus, more powerful systems might have more than 64 + * IO-APIC registers. + * + * (these are usually mapped into the 0x30-0xff vector range) + */ + +#ifdef CONFIG_X86_32 +/* + * Note that on a 486, we don't want to do a SIGFPE on an irq13 + * as the irq is unreliable, and exception 16 works correctly + * (ie as explained in the intel literature). On a 386, you + * can't use exception 16 due to bad IBM design, so we have to + * rely on the less exact irq13. + * + * Careful.. Not only is IRQ13 unreliable, but it is also + * leads to races. IBM designers who came up with it should + * be shot. + */ + +static irqreturn_t math_error_irq(int cpl, void *dev_id) +{ + outb(0, 0xF0); + if (ignore_fpu_irq || !boot_cpu_data.hard_math) + return IRQ_NONE; + math_error((void __user *)get_irq_regs()->ip); + return IRQ_HANDLED; +} + +/* + * New motherboards sometimes make IRQ 13 be a PCI interrupt, + * so allow interrupt sharing. + */ +static struct irqaction fpu_irq = { + .handler = math_error_irq, + .name = "fpu", +}; +#endif + +/* + * IRQ2 is cascade interrupt to second interrupt controller + */ +static struct irqaction irq2 = { + .handler = no_action, + .name = "cascade", +}; + +DEFINE_PER_CPU(vector_irq_t, vector_irq) = { + [0 ... IRQ0_VECTOR - 1] = -1, + [IRQ0_VECTOR] = 0, + [IRQ1_VECTOR] = 1, + [IRQ2_VECTOR] = 2, + [IRQ3_VECTOR] = 3, + [IRQ4_VECTOR] = 4, + [IRQ5_VECTOR] = 5, + [IRQ6_VECTOR] = 6, + [IRQ7_VECTOR] = 7, + [IRQ8_VECTOR] = 8, + [IRQ9_VECTOR] = 9, + [IRQ10_VECTOR] = 10, + [IRQ11_VECTOR] = 11, + [IRQ12_VECTOR] = 12, + [IRQ13_VECTOR] = 13, + [IRQ14_VECTOR] = 14, + [IRQ15_VECTOR] = 15, + [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1 +}; + +int vector_used_by_percpu_irq(unsigned int vector) +{ + int cpu; + + for_each_online_cpu(cpu) { + if (per_cpu(vector_irq, cpu)[vector] != -1) + return 1; + } + + return 0; +} + +static void __init init_ISA_irqs(void) +{ + int i; + +#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC) + init_bsp_APIC(); +#endif + init_8259A(0); + + /* + * 16 old-style INTA-cycle interrupts: + */ + for (i = 0; i < NR_IRQS_LEGACY; i++) { + struct irq_desc *desc = irq_to_desc(i); + + desc->status = IRQ_DISABLED; + desc->action = NULL; + desc->depth = 1; + + set_irq_chip_and_handler_name(i, &i8259A_chip, + handle_level_irq, "XT"); + } +} + +/* Overridden in paravirt.c */ +void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); + +static void __init smp_intr_init(void) +{ +#ifdef CONFIG_SMP +#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC) + /* + * The reschedule interrupt is a CPU-to-CPU reschedule-helper + * IPI, driven by wakeup. + */ + alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); + + /* IPIs for invalidation */ + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); + + /* IPI for generic function call */ + alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); + + /* IPI for generic single function call */ + alloc_intr_gate(CALL_FUNCTION_SINGLE_VECTOR, + call_function_single_interrupt); + + /* Low priority IPI to cleanup after moving an irq */ + set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt); + set_bit(IRQ_MOVE_CLEANUP_VECTOR, used_vectors); +#endif +#endif /* CONFIG_SMP */ +} + +static void __init apic_intr_init(void) +{ + smp_intr_init(); + +#ifdef CONFIG_X86_64 + alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); + alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); +#endif + +#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC) + /* self generated IPI for local APIC timer */ + alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); + + /* generic IPI for platform specific use */ + alloc_intr_gate(GENERIC_INTERRUPT_VECTOR, generic_interrupt); + + /* IPI vectors for APIC spurious and error interrupts */ + alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); + alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt); +#endif + +#ifdef CONFIG_X86_32 +#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_MCE_P4THERMAL) + /* thermal monitor LVT interrupt */ + alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); +#endif +#endif +} + +#ifdef CONFIG_X86_32 +/** + * x86_quirk_pre_intr_init - initialisation prior to setting up interrupt vectors + * + * Description: + * Perform any necessary interrupt initialisation prior to setting up + * the "ordinary" interrupt call gates. For legacy reasons, the ISA + * interrupts should be initialised here if the machine emulates a PC + * in any way. + **/ +static void __init x86_quirk_pre_intr_init(void) +{ + if (x86_quirks->arch_pre_intr_init) { + if (x86_quirks->arch_pre_intr_init()) + return; + } + init_ISA_irqs(); +} +#endif + +void __init native_init_IRQ(void) +{ + int i; + +#ifdef CONFIG_X86_32 + /* Execute any quirks before the call gates are initialised: */ + x86_quirk_pre_intr_init(); +#else + init_ISA_irqs(); +#endif + + /* + * Cover the whole vector space, no vector can escape + * us. (some of these will be overridden and become + * 'special' SMP interrupts) + */ + for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) { +#ifdef CONFIG_X86_32 + /* SYSCALL_VECTOR was reserved in trap_init. */ + if (i != SYSCALL_VECTOR) + set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]); +#else + /* IA32_SYSCALL_VECTOR was reserved in trap_init. */ + if (i != IA32_SYSCALL_VECTOR) + set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]); +#endif + } + + apic_intr_init(); + + if (!acpi_ioapic) + setup_irq(2, &irq2); + +#ifdef CONFIG_X86_32 + /* + * Call quirks after call gates are initialised (usually add in + * the architecture specific gates): + */ + x86_quirk_intr_init(); + + /* + * External FPU? Set up irq13 if so, for + * original braindamaged IBM FERR coupling. + */ + if (boot_cpu_data.hard_math && !cpu_has_fpu) + setup_irq(FPU_IRQ, &fpu_irq); + + irq_ctx_init(smp_processor_id()); +#endif +} diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit_32.c deleted file mode 100644 index f3be5e97427..00000000000 --- a/arch/x86/kernel/irqinit_32.c +++ /dev/null @@ -1,277 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts: - * (these are usually mapped to vectors 0x30-0x3f) - */ - -/* - * The IO-APIC gives us many more interrupt sources. Most of these - * are unused but an SMP system is supposed to have enough memory ... - * sometimes (mostly wrt. hw bugs) we get corrupted vectors all - * across the spectrum, so we really want to be prepared to get all - * of these. Plus, more powerful systems might have more than 64 - * IO-APIC registers. - * - * (these are usually mapped into the 0x30-0xff vector range) - */ - -#ifdef CONFIG_X86_32 -/* - * Note that on a 486, we don't want to do a SIGFPE on an irq13 - * as the irq is unreliable, and exception 16 works correctly - * (ie as explained in the intel literature). On a 386, you - * can't use exception 16 due to bad IBM design, so we have to - * rely on the less exact irq13. - * - * Careful.. Not only is IRQ13 unreliable, but it is also - * leads to races. IBM designers who came up with it should - * be shot. - */ - -static irqreturn_t math_error_irq(int cpl, void *dev_id) -{ - outb(0, 0xF0); - if (ignore_fpu_irq || !boot_cpu_data.hard_math) - return IRQ_NONE; - math_error((void __user *)get_irq_regs()->ip); - return IRQ_HANDLED; -} - -/* - * New motherboards sometimes make IRQ 13 be a PCI interrupt, - * so allow interrupt sharing. - */ -static struct irqaction fpu_irq = { - .handler = math_error_irq, - .name = "fpu", -}; -#endif - -/* - * IRQ2 is cascade interrupt to second interrupt controller - */ -static struct irqaction irq2 = { - .handler = no_action, - .name = "cascade", -}; - -DEFINE_PER_CPU(vector_irq_t, vector_irq) = { - [0 ... IRQ0_VECTOR - 1] = -1, - [IRQ0_VECTOR] = 0, - [IRQ1_VECTOR] = 1, - [IRQ2_VECTOR] = 2, - [IRQ3_VECTOR] = 3, - [IRQ4_VECTOR] = 4, - [IRQ5_VECTOR] = 5, - [IRQ6_VECTOR] = 6, - [IRQ7_VECTOR] = 7, - [IRQ8_VECTOR] = 8, - [IRQ9_VECTOR] = 9, - [IRQ10_VECTOR] = 10, - [IRQ11_VECTOR] = 11, - [IRQ12_VECTOR] = 12, - [IRQ13_VECTOR] = 13, - [IRQ14_VECTOR] = 14, - [IRQ15_VECTOR] = 15, - [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1 -}; - -int vector_used_by_percpu_irq(unsigned int vector) -{ - int cpu; - - for_each_online_cpu(cpu) { - if (per_cpu(vector_irq, cpu)[vector] != -1) - return 1; - } - - return 0; -} - -static void __init init_ISA_irqs(void) -{ - int i; - -#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC) - init_bsp_APIC(); -#endif - init_8259A(0); - - /* - * 16 old-style INTA-cycle interrupts: - */ - for (i = 0; i < NR_IRQS_LEGACY; i++) { - struct irq_desc *desc = irq_to_desc(i); - - desc->status = IRQ_DISABLED; - desc->action = NULL; - desc->depth = 1; - - set_irq_chip_and_handler_name(i, &i8259A_chip, - handle_level_irq, "XT"); - } -} - -/* Overridden in paravirt.c */ -void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); - -static void __init smp_intr_init(void) -{ -#ifdef CONFIG_SMP -#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC) - /* - * The reschedule interrupt is a CPU-to-CPU reschedule-helper - * IPI, driven by wakeup. - */ - alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); - - /* IPIs for invalidation */ - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); - - /* IPI for generic function call */ - alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); - - /* IPI for generic single function call */ - alloc_intr_gate(CALL_FUNCTION_SINGLE_VECTOR, - call_function_single_interrupt); - - /* Low priority IPI to cleanup after moving an irq */ - set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt); - set_bit(IRQ_MOVE_CLEANUP_VECTOR, used_vectors); -#endif -#endif /* CONFIG_SMP */ -} - -static void __init apic_intr_init(void) -{ - smp_intr_init(); - -#ifdef CONFIG_X86_64 - alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); - alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); -#endif - -#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC) - /* self generated IPI for local APIC timer */ - alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); - - /* generic IPI for platform specific use */ - alloc_intr_gate(GENERIC_INTERRUPT_VECTOR, generic_interrupt); - - /* IPI vectors for APIC spurious and error interrupts */ - alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); - alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt); -#endif - -#ifdef CONFIG_X86_32 -#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_MCE_P4THERMAL) - /* thermal monitor LVT interrupt */ - alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); -#endif -#endif -} - -#ifdef CONFIG_X86_32 -/** - * x86_quirk_pre_intr_init - initialisation prior to setting up interrupt vectors - * - * Description: - * Perform any necessary interrupt initialisation prior to setting up - * the "ordinary" interrupt call gates. For legacy reasons, the ISA - * interrupts should be initialised here if the machine emulates a PC - * in any way. - **/ -static void __init x86_quirk_pre_intr_init(void) -{ - if (x86_quirks->arch_pre_intr_init) { - if (x86_quirks->arch_pre_intr_init()) - return; - } - init_ISA_irqs(); -} -#endif - -void __init native_init_IRQ(void) -{ - int i; - -#ifdef CONFIG_X86_32 - /* Execute any quirks before the call gates are initialised: */ - x86_quirk_pre_intr_init(); -#else - init_ISA_irqs(); -#endif - - /* - * Cover the whole vector space, no vector can escape - * us. (some of these will be overridden and become - * 'special' SMP interrupts) - */ - for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) { -#ifdef CONFIG_X86_32 - /* SYSCALL_VECTOR was reserved in trap_init. */ - if (i != SYSCALL_VECTOR) - set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]); -#else - /* IA32_SYSCALL_VECTOR was reserved in trap_init. */ - if (i != IA32_SYSCALL_VECTOR) - set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]); -#endif - } - - apic_intr_init(); - - if (!acpi_ioapic) - setup_irq(2, &irq2); - -#ifdef CONFIG_X86_32 - /* - * Call quirks after call gates are initialised (usually add in - * the architecture specific gates): - */ - x86_quirk_intr_init(); - - /* - * External FPU? Set up irq13 if so, for - * original braindamaged IBM FERR coupling. - */ - if (boot_cpu_data.hard_math && !cpu_has_fpu) - setup_irq(FPU_IRQ, &fpu_irq); - - irq_ctx_init(smp_processor_id()); -#endif -} diff --git a/arch/x86/kernel/irqinit_64.c b/arch/x86/kernel/irqinit_64.c deleted file mode 100644 index f3be5e97427..00000000000 --- a/arch/x86/kernel/irqinit_64.c +++ /dev/null @@ -1,277 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts: - * (these are usually mapped to vectors 0x30-0x3f) - */ - -/* - * The IO-APIC gives us many more interrupt sources. Most of these - * are unused but an SMP system is supposed to have enough memory ... - * sometimes (mostly wrt. hw bugs) we get corrupted vectors all - * across the spectrum, so we really want to be prepared to get all - * of these. Plus, more powerful systems might have more than 64 - * IO-APIC registers. - * - * (these are usually mapped into the 0x30-0xff vector range) - */ - -#ifdef CONFIG_X86_32 -/* - * Note that on a 486, we don't want to do a SIGFPE on an irq13 - * as the irq is unreliable, and exception 16 works correctly - * (ie as explained in the intel literature). On a 386, you - * can't use exception 16 due to bad IBM design, so we have to - * rely on the less exact irq13. - * - * Careful.. Not only is IRQ13 unreliable, but it is also - * leads to races. IBM designers who came up with it should - * be shot. - */ - -static irqreturn_t math_error_irq(int cpl, void *dev_id) -{ - outb(0, 0xF0); - if (ignore_fpu_irq || !boot_cpu_data.hard_math) - return IRQ_NONE; - math_error((void __user *)get_irq_regs()->ip); - return IRQ_HANDLED; -} - -/* - * New motherboards sometimes make IRQ 13 be a PCI interrupt, - * so allow interrupt sharing. - */ -static struct irqaction fpu_irq = { - .handler = math_error_irq, - .name = "fpu", -}; -#endif - -/* - * IRQ2 is cascade interrupt to second interrupt controller - */ -static struct irqaction irq2 = { - .handler = no_action, - .name = "cascade", -}; - -DEFINE_PER_CPU(vector_irq_t, vector_irq) = { - [0 ... IRQ0_VECTOR - 1] = -1, - [IRQ0_VECTOR] = 0, - [IRQ1_VECTOR] = 1, - [IRQ2_VECTOR] = 2, - [IRQ3_VECTOR] = 3, - [IRQ4_VECTOR] = 4, - [IRQ5_VECTOR] = 5, - [IRQ6_VECTOR] = 6, - [IRQ7_VECTOR] = 7, - [IRQ8_VECTOR] = 8, - [IRQ9_VECTOR] = 9, - [IRQ10_VECTOR] = 10, - [IRQ11_VECTOR] = 11, - [IRQ12_VECTOR] = 12, - [IRQ13_VECTOR] = 13, - [IRQ14_VECTOR] = 14, - [IRQ15_VECTOR] = 15, - [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1 -}; - -int vector_used_by_percpu_irq(unsigned int vector) -{ - int cpu; - - for_each_online_cpu(cpu) { - if (per_cpu(vector_irq, cpu)[vector] != -1) - return 1; - } - - return 0; -} - -static void __init init_ISA_irqs(void) -{ - int i; - -#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC) - init_bsp_APIC(); -#endif - init_8259A(0); - - /* - * 16 old-style INTA-cycle interrupts: - */ - for (i = 0; i < NR_IRQS_LEGACY; i++) { - struct irq_desc *desc = irq_to_desc(i); - - desc->status = IRQ_DISABLED; - desc->action = NULL; - desc->depth = 1; - - set_irq_chip_and_handler_name(i, &i8259A_chip, - handle_level_irq, "XT"); - } -} - -/* Overridden in paravirt.c */ -void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); - -static void __init smp_intr_init(void) -{ -#ifdef CONFIG_SMP -#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC) - /* - * The reschedule interrupt is a CPU-to-CPU reschedule-helper - * IPI, driven by wakeup. - */ - alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); - - /* IPIs for invalidation */ - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); - - /* IPI for generic function call */ - alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); - - /* IPI for generic single function call */ - alloc_intr_gate(CALL_FUNCTION_SINGLE_VECTOR, - call_function_single_interrupt); - - /* Low priority IPI to cleanup after moving an irq */ - set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt); - set_bit(IRQ_MOVE_CLEANUP_VECTOR, used_vectors); -#endif -#endif /* CONFIG_SMP */ -} - -static void __init apic_intr_init(void) -{ - smp_intr_init(); - -#ifdef CONFIG_X86_64 - alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); - alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); -#endif - -#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC) - /* self generated IPI for local APIC timer */ - alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); - - /* generic IPI for platform specific use */ - alloc_intr_gate(GENERIC_INTERRUPT_VECTOR, generic_interrupt); - - /* IPI vectors for APIC spurious and error interrupts */ - alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); - alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt); -#endif - -#ifdef CONFIG_X86_32 -#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_MCE_P4THERMAL) - /* thermal monitor LVT interrupt */ - alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); -#endif -#endif -} - -#ifdef CONFIG_X86_32 -/** - * x86_quirk_pre_intr_init - initialisation prior to setting up interrupt vectors - * - * Description: - * Perform any necessary interrupt initialisation prior to setting up - * the "ordinary" interrupt call gates. For legacy reasons, the ISA - * interrupts should be initialised here if the machine emulates a PC - * in any way. - **/ -static void __init x86_quirk_pre_intr_init(void) -{ - if (x86_quirks->arch_pre_intr_init) { - if (x86_quirks->arch_pre_intr_init()) - return; - } - init_ISA_irqs(); -} -#endif - -void __init native_init_IRQ(void) -{ - int i; - -#ifdef CONFIG_X86_32 - /* Execute any quirks before the call gates are initialised: */ - x86_quirk_pre_intr_init(); -#else - init_ISA_irqs(); -#endif - - /* - * Cover the whole vector space, no vector can escape - * us. (some of these will be overridden and become - * 'special' SMP interrupts) - */ - for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) { -#ifdef CONFIG_X86_32 - /* SYSCALL_VECTOR was reserved in trap_init. */ - if (i != SYSCALL_VECTOR) - set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]); -#else - /* IA32_SYSCALL_VECTOR was reserved in trap_init. */ - if (i != IA32_SYSCALL_VECTOR) - set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]); -#endif - } - - apic_intr_init(); - - if (!acpi_ioapic) - setup_irq(2, &irq2); - -#ifdef CONFIG_X86_32 - /* - * Call quirks after call gates are initialised (usually add in - * the architecture specific gates): - */ - x86_quirk_intr_init(); - - /* - * External FPU? Set up irq13 if so, for - * original braindamaged IBM FERR coupling. - */ - if (boot_cpu_data.hard_math && !cpu_has_fpu) - setup_irq(FPU_IRQ, &fpu_irq); - - irq_ctx_init(smp_processor_id()); -#endif -} -- cgit v1.2.3 From ac3048dfd4740becf8d768844cf47ebee363c9f8 Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Thu, 9 Apr 2009 11:52:29 +0300 Subject: x86: define IA32_SYSCALL_VECTOR on 32-bit to reduce ifdefs Impact: cleanup We can remove some #ifdefs if we define IA32_SYSCALL_VECTOR on 32-bit. Reviewed-by Cyrill Gorcunov Signed-off-by: Pekka Enberg Signed-off-by: Ingo Molnar --- arch/x86/include/asm/irq_vectors.h | 1 + arch/x86/kernel/irqinit.c | 6 ------ arch/x86/kernel/traps.c | 5 +---- 3 files changed, 2 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h index 3cbd79bbb47..910b5a3d675 100644 --- a/arch/x86/include/asm/irq_vectors.h +++ b/arch/x86/include/asm/irq_vectors.h @@ -34,6 +34,7 @@ #ifdef CONFIG_X86_32 # define SYSCALL_VECTOR 0x80 +# define IA32_SYSCALL_VECTOR 0x80 #else # define IA32_SYSCALL_VECTOR 0x80 #endif diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c index f3be5e97427..f2c60a59f47 100644 --- a/arch/x86/kernel/irqinit.c +++ b/arch/x86/kernel/irqinit.c @@ -242,15 +242,9 @@ void __init native_init_IRQ(void) * 'special' SMP interrupts) */ for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) { -#ifdef CONFIG_X86_32 - /* SYSCALL_VECTOR was reserved in trap_init. */ - if (i != SYSCALL_VECTOR) - set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]); -#else /* IA32_SYSCALL_VECTOR was reserved in trap_init. */ if (i != IA32_SYSCALL_VECTOR) set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]); -#endif } apic_intr_init(); diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c index a1d288327ff..2310700faca 100644 --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -969,11 +969,8 @@ void __init trap_init(void) for (i = 0; i < FIRST_EXTERNAL_VECTOR; i++) set_bit(i, used_vectors); -#ifdef CONFIG_X86_64 set_bit(IA32_SYSCALL_VECTOR, used_vectors); -#else - set_bit(SYSCALL_VECTOR, used_vectors); -#endif + /* * Should be a barrier for any external CPU state: */ -- cgit v1.2.3 From abdb5a5713330e17dfe91ab0d3e29c4744d95162 Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Thu, 9 Apr 2009 11:52:30 +0300 Subject: x86: remove some ifdefs from native_init_IRQ() Impact: cleanup Reviewed-by Cyrill Gorcunov Signed-off-by: Pekka Enberg Signed-off-by: Ingo Molnar --- arch/x86/kernel/irqinit.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c index f2c60a59f47..626977200a5 100644 --- a/arch/x86/kernel/irqinit.c +++ b/arch/x86/kernel/irqinit.c @@ -205,7 +205,6 @@ static void __init apic_intr_init(void) #endif } -#ifdef CONFIG_X86_32 /** * x86_quirk_pre_intr_init - initialisation prior to setting up interrupt vectors * @@ -217,24 +216,21 @@ static void __init apic_intr_init(void) **/ static void __init x86_quirk_pre_intr_init(void) { +#ifdef CONFIG_X86_32 if (x86_quirks->arch_pre_intr_init) { if (x86_quirks->arch_pre_intr_init()) return; } +#endif init_ISA_irqs(); } -#endif void __init native_init_IRQ(void) { int i; -#ifdef CONFIG_X86_32 /* Execute any quirks before the call gates are initialised: */ x86_quirk_pre_intr_init(); -#else - init_ISA_irqs(); -#endif /* * Cover the whole vector space, no vector can escape -- cgit v1.2.3 From 47f16ca7631f9c6bad8e6d968cfb1433029b09ec Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 10 Apr 2009 14:58:05 +0200 Subject: x86, irqinit: preempt merge conflicts To make the topic merge life easier for tip:perfcounters/core, include two (inactive in this topic) IRQ vector initializations here. Also fix build bug - missing kprobes.h inclusion. Signed-off-by: Ingo Molnar --- arch/x86/kernel/irqinit.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c index 626977200a5..b424c32c4a0 100644 --- a/arch/x86/kernel/irqinit.c +++ b/arch/x86/kernel/irqinit.c @@ -7,6 +7,7 @@ #include #include #include +#include #include #include #include @@ -195,6 +196,13 @@ static void __init apic_intr_init(void) /* IPI vectors for APIC spurious and error interrupts */ alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt); + + /* Performance monitoring interrupts: */ +# ifdef CONFIG_PERF_COUNTERS + alloc_intr_gate(LOCAL_PERF_VECTOR, perf_counter_interrupt); + alloc_intr_gate(LOCAL_PENDING_VECTOR, perf_pending_interrupt); +# endif + #endif #ifdef CONFIG_X86_32 -- cgit v1.2.3 From edea7148a87c099e5d5d4838285cc27e459588b7 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sun, 12 Apr 2009 20:47:39 +0400 Subject: x86: irq.c - tiny cleanup Impact: cleanup, robustization 1) guard ack_bad_irq with printk_ratelimit since there is no guarantee we will not be flooded one day 2) use pr_emerg() helper Signed-off-by: Cyrill Gorcunov LKML-Reference: <20090412165058.277579847@openvz.org> Signed-off-by: Ingo Molnar --- arch/x86/kernel/irq.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c index 3aaf7b9e3a8..6603492e8b7 100644 --- a/arch/x86/kernel/irq.c +++ b/arch/x86/kernel/irq.c @@ -24,7 +24,8 @@ void (*generic_interrupt_extension)(void) = NULL; */ void ack_bad_irq(unsigned int irq) { - printk(KERN_ERR "unexpected IRQ trap at vector %02x\n", irq); + if (printk_ratelimit()) + pr_err("unexpected IRQ trap at vector %02x\n", irq); #ifdef CONFIG_X86_LOCAL_APIC /* @@ -178,7 +179,7 @@ u64 arch_irq_stat_cpu(unsigned int cpu) sum += irq_stats(cpu)->irq_thermal_count; # ifdef CONFIG_X86_64 sum += irq_stats(cpu)->irq_threshold_count; -#endif +# endif #endif return sum; } @@ -219,8 +220,8 @@ unsigned int __irq_entry do_IRQ(struct pt_regs *regs) #endif if (printk_ratelimit()) - printk(KERN_EMERG "%s: %d.%d No irq handler for vector (irq %d)\n", - __func__, smp_processor_id(), vector, irq); + pr_emerg("%s: %d.%d No irq handler for vector (irq %d)\n", + __func__, smp_processor_id(), vector, irq); } irq_exit(); -- cgit v1.2.3 From c0eaa4536f08b98fbcfa7fce5b7b0de1bebcb0e1 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sun, 12 Apr 2009 20:47:40 +0400 Subject: x86: apic - introduce imcr_ helpers Impact: cleanup Distinguish port writting magic into helpers with comments. Signed-off-by: Cyrill Gorcunov LKML-Reference: <20090412165058.535921550@openvz.org> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/apic.c | 29 +++++++++++++++++++++++++---- 1 file changed, 25 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 098ec84b8c0..c3be10f5773 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -98,6 +98,29 @@ early_param("lapic", parse_lapic); /* Local APIC was disabled by the BIOS and enabled by the kernel */ static int enabled_via_apicbase; +/* + * Handle interrupt mode configuration register (IMCR). + * This register controls whether the interrupt signals + * that reach the BSP come from the master PIC or from the + * local APIC. Before entering Symmetric I/O Mode, either + * the BIOS or the operating system must switch out of + * PIC Mode by changing the IMCR. + */ +static inline imcr_pic_to_apic(void) +{ + /* select IMCR register */ + outb(0x70, 0x22); + /* NMI and 8259 INTR go through APIC */ + outb(0x01, 0x23); +} + +static inline imcr_apic_to_pic(void) +{ + /* select IMCR register */ + outb(0x70, 0x22); + /* NMI and 8259 INTR go directly to BSP */ + outb(0x00, 0x23); +} #endif #ifdef CONFIG_X86_64 @@ -1727,8 +1750,7 @@ void __init connect_bsp_APIC(void) */ apic_printk(APIC_VERBOSE, "leaving PIC mode, " "enabling APIC mode.\n"); - outb(0x70, 0x22); - outb(0x01, 0x23); + imcr_pic_to_apic(); } #endif if (apic->enable_apic_mode) @@ -1756,8 +1778,7 @@ void disconnect_bsp_APIC(int virt_wire_setup) */ apic_printk(APIC_VERBOSE, "disabling APIC mode, " "entering PIC mode.\n"); - outb(0x70, 0x22); - outb(0x00, 0x23); + imcr_apic_to_pic(); return; } #endif -- cgit v1.2.3 From 08306ce61d6848e6fbf74fa4cc693c3fb29e943f Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sun, 12 Apr 2009 20:47:41 +0400 Subject: x86: apic - introduce dummy apic operations Impact: refactor, speed up and robustize code In case if apic was disabled by kernel option or by hardware limits we can use dummy operations in apic->write to simplify the ack_APIC_irq() code. At the lame time the patch fixes the missed EOI in do_IRQ function (which has place if kernel is compiled as X86-32 and interrupt without handler happens where apic was not asked to be disabled via kernel option). Note that native_apic_write_dummy() consists of WARN_ON_ONCE to catch any buggy writes on enabled APICs. Could be removed after some time of testing. Signed-off-by: Cyrill Gorcunov LKML-Reference: <20090412165058.724788431@openvz.org> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/apic.h | 3 ++- arch/x86/kernel/apic/apic.c | 24 ++++++++++++++++++++++++ arch/x86/kernel/irq.c | 10 ++-------- 3 files changed, 28 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h index 42f2f837742..2bd5a463fd1 100644 --- a/arch/x86/include/asm/apic.h +++ b/arch/x86/include/asm/apic.h @@ -212,6 +212,7 @@ static inline void ack_x2APIC_irq(void) } #endif +extern void apic_disable(void); extern int lapic_get_maxlvt(void); extern void clear_local_APIC(void); extern void connect_bsp_APIC(void); @@ -252,7 +253,7 @@ static inline void lapic_shutdown(void) { } #define local_apic_timer_c2_ok 1 static inline void init_apic_mappings(void) { } static inline void disable_local_APIC(void) { } - +static inline void apic_disable(void) { } #endif /* !CONFIG_X86_LOCAL_APIC */ #ifdef CONFIG_X86_64 diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index c3be10f5773..9b849d4957d 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -232,6 +232,24 @@ static int modern_apic(void) return lapic_get_version() >= 0x14; } +/* + * bare function to substitute write operation + * and it's _that_ fast :) + */ +void native_apic_write_dummy(u32 reg, u32 v) +{ + WARN_ON_ONCE((cpu_has_apic || !disable_apic)); +} + +/* + * right after this call apic->write doesn't do anything + * note that there is no restore operation it works one way + */ +void apic_disable(void) +{ + apic->write = native_apic_write_dummy; +} + void native_apic_wait_icr_idle(void) { while (apic_read(APIC_ICR) & APIC_ICR_BUSY) @@ -1582,6 +1600,12 @@ void __init init_apic_mappings(void) */ if (boot_cpu_physical_apicid == -1U) boot_cpu_physical_apicid = read_apic_id(); + + /* lets check if we may to NOP'ify apic operations */ + if (!cpu_has_apic) { + pr_info("APIC: disable apic facility\n"); + apic_disable(); + } } /* diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c index 6603492e8b7..fd57bf35d0f 100644 --- a/arch/x86/kernel/irq.c +++ b/arch/x86/kernel/irq.c @@ -27,7 +27,6 @@ void ack_bad_irq(unsigned int irq) if (printk_ratelimit()) pr_err("unexpected IRQ trap at vector %02x\n", irq); -#ifdef CONFIG_X86_LOCAL_APIC /* * Currently unexpected vectors happen only on SMP and APIC. * We _must_ ack these because every local APIC has only N @@ -37,9 +36,7 @@ void ack_bad_irq(unsigned int irq) * completely. * But only ack when the APIC is enabled -AK */ - if (cpu_has_apic) - ack_APIC_irq(); -#endif + ack_APIC_irq(); } #define irq_stats(x) (&per_cpu(irq_stat, x)) @@ -214,10 +211,7 @@ unsigned int __irq_entry do_IRQ(struct pt_regs *regs) irq = __get_cpu_var(vector_irq)[vector]; if (!handle_irq(irq, regs)) { -#ifdef CONFIG_X86_64 - if (!disable_apic) - ack_APIC_irq(); -#endif + ack_APIC_irq(); if (printk_ratelimit()) pr_emerg("%s: %d.%d No irq handler for vector (irq %d)\n", -- cgit v1.2.3 From b9b34f24b23ba9e79e07c0980e7fff16af2a67d1 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sun, 12 Apr 2009 20:47:42 +0400 Subject: x86: smp.c - align smp_ops assignments Impact: cleanup It's a bit hard to parse by eyes without them being aligned. Signed-off-by: Cyrill Gorcunov LKML-Reference: <20090412165058.924175574@openvz.org> Signed-off-by: Ingo Molnar --- arch/x86/kernel/smp.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c index 13f33ea8cca..f6db48c405b 100644 --- a/arch/x86/kernel/smp.c +++ b/arch/x86/kernel/smp.c @@ -193,19 +193,19 @@ void smp_call_function_single_interrupt(struct pt_regs *regs) } struct smp_ops smp_ops = { - .smp_prepare_boot_cpu = native_smp_prepare_boot_cpu, - .smp_prepare_cpus = native_smp_prepare_cpus, - .smp_cpus_done = native_smp_cpus_done, + .smp_prepare_boot_cpu = native_smp_prepare_boot_cpu, + .smp_prepare_cpus = native_smp_prepare_cpus, + .smp_cpus_done = native_smp_cpus_done, - .smp_send_stop = native_smp_send_stop, - .smp_send_reschedule = native_smp_send_reschedule, + .smp_send_stop = native_smp_send_stop, + .smp_send_reschedule = native_smp_send_reschedule, - .cpu_up = native_cpu_up, - .cpu_die = native_cpu_die, - .cpu_disable = native_cpu_disable, - .play_dead = native_play_dead, + .cpu_up = native_cpu_up, + .cpu_die = native_cpu_die, + .cpu_disable = native_cpu_disable, + .play_dead = native_play_dead, - .send_call_func_ipi = native_send_call_func_ipi, + .send_call_func_ipi = native_send_call_func_ipi, .send_call_func_single_ipi = native_send_call_func_single_ipi, }; EXPORT_SYMBOL_GPL(smp_ops); -- cgit v1.2.3 From 5cda395f4a262788d8ed79ac8a26a2b821e5f751 Mon Sep 17 00:00:00 2001 From: Alexander van Heukelum Date: Mon, 13 Apr 2009 17:39:24 +0200 Subject: x86: fix function definitions after: x86: apic - introduce imcr_ helpers The patch "introduce imcr_ helpers" introduced good comments, but also a few new compile warnings. This fixes the function definitions to have a 'void' return type. Signed-off-by: Alexander van Heukelum Acked-by: Cyrill Gorcunov LKML-Reference: <20090413153924.GA20287@mailshack.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/apic.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 9b849d4957d..4b48ff9163c 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -106,7 +106,7 @@ static int enabled_via_apicbase; * the BIOS or the operating system must switch out of * PIC Mode by changing the IMCR. */ -static inline imcr_pic_to_apic(void) +static inline void imcr_pic_to_apic(void) { /* select IMCR register */ outb(0x70, 0x22); @@ -114,7 +114,7 @@ static inline imcr_pic_to_apic(void) outb(0x01, 0x23); } -static inline imcr_apic_to_pic(void) +static inline void imcr_apic_to_pic(void) { /* select IMCR register */ outb(0x70, 0x22); -- cgit v1.2.3 From 77857dc07247ed5fa700a197c96ef842d8dbebdf Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 15 Apr 2009 11:57:01 -0700 Subject: x86: use used_vectors in init_IRQ() Impact: fix crash with many devices I found this crash: [ 552.616646] general protection fault: 0403 [#1] SMP [ 552.620013] last sysfs file: /sys/devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/host13/target13:0:0/13:0:0:0/block/sr0/size [ 552.620013] CPU 0 [ 552.620013] Modules linked in: [ 552.620013] Pid: 0, comm: swapper Not tainted 2.6.30-rc1-tip-01931-g8fcafd8-dirty #28 Sun Fire X4440 [ 552.620013] RIP: 0010:[] [] default_idle+0x7d/0xda [ 552.620013] RSP: 0018:ffffffff81345e68 EFLAGS: 00010246 [ 552.620013] RAX: 0000000000000000 RBX: ffffffff8133d870 RCX: ffffc20000000000 [ 552.620013] RDX: 00000000001d0620 RSI: ffffffff8023bad8 RDI: ffffffff802a3169 [ 552.620013] RBP: ffffffff81345e98 R08: 0000000000000000 R09: ffffffff812244a0 [ 552.620013] R10: ffffffff81345dc8 R11: 7ebe1b6fa0bcac50 R12: 4ec4ec4ec4ec4ec5 [ 552.620013] R13: ffffffff813a54d0 R14: ffffffff813a7a40 R15: 0000000000000000 [ 552.620013] FS: 00000000006d1880(0000) GS:ffffc20000000000(0000) knlGS:0000000000000000 [ 552.620013] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b [ 552.620013] CR2: 00007fec9d936a50 CR3: 000000007d1a9000 CR4: 00000000000006e0 [ 552.620013] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 552.620013] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 552.620013] Process swapper (pid: 0, threadinfo ffffffff81344000,task ffffffff812244a0) [ 552.620013] Stack: [ 552.620013] 0000000000000000 ffffc20000000000 00000000001d0620 7ebe1b6fa0bcac50 [ 552.620013] ffffffff8133d870 4ec4ec4ec4ec4ec5 ffffffff81345ec8 ffffffff8023bd84 [ 552.620013] 4ec4ec4ec4ec4ec5 ffffffff813a54d0 7ebe1b6fa0bcac50 ffffffff8133d870 [ 552.620013] Call Trace: [ 552.620013] [] c1e_idle+0x109/0x124 [ 552.620013] [] cpu_idle+0xb8/0x101 [ 552.620013] [] rest_init+0x7e/0x94 [ 552.620013] [] start_kernel+0x3dc/0x3fd [ 552.620013] [] x86_64_start_reservations+0xb9/0xd4 [ 552.620013] [] x86_64_start_kernel+0xee/0x109 [ 552.620013] Code: 48 8b 04 25 f8 b4 00 00 83 a0 3c e0 ff ff fb 0f ae f0 65 48 8b 04 25 f8 b4 00 00 f6 80 38 e0 ff ff 08 75 09 e8 71 76 06 00 fb f4 06 e8 68 76 06 00 fb 65 48 8b 04 25 f8 b4 00 00 83 88 3c e0 [ 552.620013] RIP [] default_idle+0x7d/0xda [ 552.620013] RSP [ 552.828646] ---[ end trace 4cbfc5c01382af7f ]--- Joerg Roedel said "The 0403 error code means that there was an external interrupt with vector 0x80. Yinghai, my theory is that the kernel on this machine has no 32bit emulation compiled in, right? In this case the selector points to a zero entry which may cause the #gpf right after the hlt. But I have no idea where the external int 0x80 comes from" it turns out that we could use 0x80 for external device on 64-bit when 32-bit emulation is disabled. But we forgot to set the gate for it. try to set gate for it by checking used_vectors. Also move apic_intr_init() early to avoid setting that gate two times. Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: Joerg Roedel LKML-Reference: <49E62DFD.6010904@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/kernel/irqinit.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c index b424c32c4a0..2e08b10ad51 100644 --- a/arch/x86/kernel/irqinit.c +++ b/arch/x86/kernel/irqinit.c @@ -240,19 +240,19 @@ void __init native_init_IRQ(void) /* Execute any quirks before the call gates are initialised: */ x86_quirk_pre_intr_init(); + apic_intr_init(); + /* * Cover the whole vector space, no vector can escape * us. (some of these will be overridden and become * 'special' SMP interrupts) */ for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) { - /* IA32_SYSCALL_VECTOR was reserved in trap_init. */ - if (i != IA32_SYSCALL_VECTOR) + /* IA32_SYSCALL_VECTOR could be used in trap_init already. */ + if (!test_bit(i, used_vectors)) set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]); } - apic_intr_init(); - if (!acpi_ioapic) setup_irq(2, &irq2); -- cgit v1.2.3 From 5d0ae2db6deac4f15dac4f42f23bc56448fc8d4d Mon Sep 17 00:00:00 2001 From: Weidong Han Date: Fri, 17 Apr 2009 16:42:13 +0800 Subject: x86, intr-remap: fix ack for interrupt remapping Shouldn't call ack_apic_edge() in ir_ack_apic_edge(), because ack_apic_edge() does more than just ack: it also does irq migration in the non-interrupt-remapping case. But there is no such need for interrupt-remapping case, as irq migration is done in the process context. Similarly, ir_ack_apic_level() shouldn't call ack_apic_level, and instead should do the local cpu's EOI + directed EOI to the io-apic. ack_x2APIC_irq() is not neccessary, because ack_APIC_irq() will use MSR write for x2apic, and uncached write for non-x2apic. [ Impact: simplify/standardize intr-remap IRQ acking, fix on !x2apic ] Signed-off-by: Suresh Siddha Signed-off-by: Weidong Han Acked-by: David Woodhouse Cc: iommu@lists.linux-foundation.org Cc: allen.m.kay@intel.com Cc: fenghua.yu@intel.com LKML-Reference: <1239957736-6161-3-git-send-email-weidong.han@intel.com> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/apic.h | 8 -------- arch/x86/kernel/apic/io_apic.c | 32 +++++--------------------------- 2 files changed, 5 insertions(+), 35 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h index 2bd5a463fd1..d4cb7e590c0 100644 --- a/arch/x86/include/asm/apic.h +++ b/arch/x86/include/asm/apic.h @@ -204,14 +204,6 @@ static inline int x2apic_enabled(void) extern int get_physical_broadcast(void); -#ifdef CONFIG_X86_X2APIC -static inline void ack_x2APIC_irq(void) -{ - /* Docs say use 0 for future compatibility */ - native_apic_msr_write(APIC_EOI, 0); -} -#endif - extern void apic_disable(void); extern int lapic_get_maxlvt(void); extern void clear_local_APIC(void); diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 84990002240..ea22a86e3cd 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -2552,20 +2552,6 @@ eoi_ioapic_irq(struct irq_desc *desc) spin_unlock_irqrestore(&ioapic_lock, flags); } -#ifdef CONFIG_X86_X2APIC -static void ack_x2apic_level(unsigned int irq) -{ - struct irq_desc *desc = irq_to_desc(irq); - ack_x2APIC_irq(); - eoi_ioapic_irq(desc); -} - -static void ack_x2apic_edge(unsigned int irq) -{ - ack_x2APIC_irq(); -} -#endif - static void ack_apic_edge(unsigned int irq) { struct irq_desc *desc = irq_to_desc(irq); @@ -2629,9 +2615,6 @@ static void ack_apic_level(unsigned int irq) */ ack_APIC_irq(); - if (irq_remapped(irq)) - eoi_ioapic_irq(desc); - /* Now we can move and renable the irq */ if (unlikely(do_unmask_irq)) { /* Only migrate the irq if the ack has been received. @@ -2680,20 +2663,15 @@ static void ack_apic_level(unsigned int irq) #ifdef CONFIG_INTR_REMAP static void ir_ack_apic_edge(unsigned int irq) { -#ifdef CONFIG_X86_X2APIC - if (x2apic_enabled()) - return ack_x2apic_edge(irq); -#endif - return ack_apic_edge(irq); + ack_APIC_irq(); } static void ir_ack_apic_level(unsigned int irq) { -#ifdef CONFIG_X86_X2APIC - if (x2apic_enabled()) - return ack_x2apic_level(irq); -#endif - return ack_apic_level(irq); + struct irq_desc *desc = irq_to_desc(irq); + + ack_APIC_irq(); + eoi_ioapic_irq(desc); } #endif /* CONFIG_INTR_REMAP */ -- cgit v1.2.3 From 937582382c71b75b29fbb92615629494e1a05ac0 Mon Sep 17 00:00:00 2001 From: Weidong Han Date: Fri, 17 Apr 2009 16:42:14 +0800 Subject: x86, intr-remap: enable interrupt remapping early Currently, when x2apic is not enabled, interrupt remapping will be enabled in init_dmars(), where it is too late to remap ioapic interrupts, that is, ioapic interrupts are really in compatibility mode, not remappable mode. This patch always enables interrupt remapping before ioapic setup, it guarantees all interrupts will be remapped when interrupt remapping is enabled. Thus it doesn't need to set the compatibility interrupt bit. [ Impact: refactor intr-remap init sequence, enable fuller remap mode ] Signed-off-by: Suresh Siddha Signed-off-by: Weidong Han Acked-by: David Woodhouse Cc: iommu@lists.linux-foundation.org Cc: allen.m.kay@intel.com Cc: fenghua.yu@intel.com LKML-Reference: <1239957736-6161-4-git-send-email-weidong.han@intel.com> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/apic.h | 7 ++--- arch/x86/kernel/apic/apic.c | 76 +++++++++++++++++++++------------------------ 2 files changed, 39 insertions(+), 44 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h index d4cb7e590c0..fbdd65446c7 100644 --- a/arch/x86/include/asm/apic.h +++ b/arch/x86/include/asm/apic.h @@ -169,7 +169,6 @@ static inline u64 native_x2apic_icr_read(void) extern int x2apic, x2apic_phys; extern void check_x2apic(void); extern void enable_x2apic(void); -extern void enable_IR_x2apic(void); extern void x2apic_icr_write(u32 low, u32 id); static inline int x2apic_enabled(void) { @@ -190,18 +189,18 @@ static inline void check_x2apic(void) static inline void enable_x2apic(void) { } -static inline void enable_IR_x2apic(void) -{ -} static inline int x2apic_enabled(void) { return 0; } #define x2apic 0 +#define x2apic_preenabled 0 #endif +extern void enable_IR_x2apic(void); + extern int get_physical_broadcast(void); extern void apic_disable(void); diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 83e47febcc8..0cf1eea750c 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -141,6 +141,8 @@ static int x2apic_preenabled; static int disable_x2apic; static __init int setup_nox2apic(char *str) { + if (x2apic_enabled()) + panic("Bios already enabled x2apic, can't enforce nox2apic"); disable_x2apic = 1; setup_clear_cpu_cap(X86_FEATURE_X2APIC); return 0; @@ -1345,6 +1347,7 @@ void enable_x2apic(void) wrmsr(MSR_IA32_APICBASE, msr | X2APIC_ENABLE, 0); } } +#endif /* CONFIG_X86_X2APIC */ void __init enable_IR_x2apic(void) { @@ -1353,32 +1356,21 @@ void __init enable_IR_x2apic(void) unsigned long flags; struct IO_APIC_route_entry **ioapic_entries = NULL; - if (!cpu_has_x2apic) - return; - - if (!x2apic_preenabled && disable_x2apic) { - pr_info("Skipped enabling x2apic and Interrupt-remapping " - "because of nox2apic\n"); - return; + ret = dmar_table_init(); + if (ret) { + pr_debug("dmar_table_init() failed with %d:\n", ret); + goto ir_failed; } - if (x2apic_preenabled && disable_x2apic) - panic("Bios already enabled x2apic, can't enforce nox2apic"); - - if (!x2apic_preenabled && skip_ioapic_setup) { - pr_info("Skipped enabling x2apic and Interrupt-remapping " - "because of skipping io-apic setup\n"); - return; + if (!intr_remapping_supported()) { + pr_debug("intr-remapping not supported\n"); + goto ir_failed; } - ret = dmar_table_init(); - if (ret) { - pr_info("dmar_table_init() failed with %d:\n", ret); - if (x2apic_preenabled) - panic("x2apic enabled by bios. But IR enabling failed"); - else - pr_info("Not enabling x2apic,Intr-remapping\n"); + if (!x2apic_preenabled && skip_ioapic_setup) { + pr_info("Skipped enabling intr-remap because of skipping " + "io-apic setup\n"); return; } @@ -1398,20 +1390,25 @@ void __init enable_IR_x2apic(void) mask_IO_APIC_setup(ioapic_entries); mask_8259A(); - ret = enable_intr_remapping(EIM_32BIT_APIC_ID); - - if (ret && x2apic_preenabled) { - local_irq_restore(flags); - panic("x2apic enabled by bios. But IR enabling failed"); - } +#ifdef CONFIG_X86_X2APIC + if (cpu_has_x2apic) + ret = enable_intr_remapping(EIM_32BIT_APIC_ID); + else +#endif + ret = enable_intr_remapping(EIM_8BIT_APIC_ID); if (ret) goto end_restore; - if (!x2apic) { + pr_info("Enabled Interrupt-remapping\n"); + +#ifdef CONFIG_X86_X2APIC + if (cpu_has_x2apic && !x2apic) { x2apic = 1; enable_x2apic(); + pr_info("Enabled x2apic\n"); } +#endif end_restore: if (ret) @@ -1426,30 +1423,29 @@ end_restore: local_irq_restore(flags); end: - if (!ret) { - if (!x2apic_preenabled) - pr_info("Enabled x2apic and interrupt-remapping\n"); - else - pr_info("Enabled Interrupt-remapping\n"); - } else - pr_err("Failed to enable Interrupt-remapping and x2apic\n"); if (ioapic_entries) free_ioapic_entries(ioapic_entries); + + if (!ret) + return; + +ir_failed: + if (x2apic_preenabled) + panic("x2apic enabled by bios. But IR enabling failed"); + else if (cpu_has_x2apic) + pr_info("Not enabling x2apic,Intr-remapping\n"); #else if (!cpu_has_x2apic) return; if (x2apic_preenabled) panic("x2apic enabled prior OS handover," - " enable CONFIG_INTR_REMAP"); - - pr_info("Enable CONFIG_INTR_REMAP for enabling intr-remapping " - " and x2apic\n"); + " enable CONFIG_X86_X2APIC, CONFIG_INTR_REMAP"); #endif return; } -#endif /* CONFIG_X86_X2APIC */ + #ifdef CONFIG_X86_64 /* -- cgit v1.2.3 From 9a2755c3569e4db92bd9b1daadeddb4045b0cccd Mon Sep 17 00:00:00 2001 From: Weidong Han Date: Fri, 17 Apr 2009 16:42:16 +0800 Subject: x86, intr-remap: fix x2apic/intr-remap resume Interrupt remapping was decoupled from x2apic. Shouldn't check x2apic before resume interrupt remapping. Otherwise, interrupt remapping won't be resumed when x2apic is not enabled. [ Impact: fix potential intr-remap resume hang on !x2apic ] Signed-off-by: Suresh Siddha Signed-off-by: Weidong Han Acked-by: David Woodhouse Cc: iommu@lists.linux-foundation.org Cc: allen.m.kay@intel.com Cc: fenghua.yu@intel.com LKML-Reference: <1239957736-6161-6-git-send-email-weidong.han@intel.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/apic.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 0cf1eea750c..7b41a32339e 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -2032,7 +2032,7 @@ static int lapic_resume(struct sys_device *dev) return 0; local_irq_save(flags); - if (x2apic) { + if (intr_remapping_enabled) { ioapic_entries = alloc_ioapic_entries(); if (!ioapic_entries) { WARN(1, "Alloc ioapic_entries in lapic resume failed."); @@ -2048,8 +2048,10 @@ static int lapic_resume(struct sys_device *dev) mask_IO_APIC_setup(ioapic_entries); mask_8259A(); - enable_x2apic(); } + + if (x2apic) + enable_x2apic(); #else if (!apic_pm_state.active) return 0; @@ -2097,10 +2099,12 @@ static int lapic_resume(struct sys_device *dev) apic_read(APIC_ESR); #ifdef CONFIG_INTR_REMAP - if (intr_remapping_enabled) - reenable_intr_remapping(EIM_32BIT_APIC_ID); + if (intr_remapping_enabled) { + if (x2apic) + reenable_intr_remapping(EIM_32BIT_APIC_ID); + else + reenable_intr_remapping(EIM_8BIT_APIC_ID); - if (x2apic) { unmask_8259A(); restore_IO_APIC_setup(ioapic_entries); free_ioapic_entries(ioapic_entries); @@ -2109,7 +2113,6 @@ static int lapic_resume(struct sys_device *dev) local_irq_restore(flags); - return 0; } -- cgit v1.2.3 From cece3155d869a50ba534ed161b5a05e8a29dcad0 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 18 Apr 2009 23:45:28 +0400 Subject: x86: smpboot - wakeup_secondary should be done via __cpuinit section A caller (do_boot_cpu) already has __cpuinit attribute. Since HOTPLUG_CPU depends on SMP && HOTPLUG it doesn't lead to panic at moment. [ Impact: cleanup ] Signed-off-by: Cyrill Gorcunov LKML-Reference: <20090418194528.GD25510@lenovo> Signed-off-by: Ingo Molnar --- arch/x86/kernel/smpboot.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index bf8ad6344b1..d2e8de95815 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -504,7 +504,7 @@ void __inquire_remote_apic(int apicid) * INIT, INIT, STARTUP sequence will reset the chip hard for us, and this * won't ... remember to clear down the APIC, etc later. */ -int __devinit +int __cpuinit wakeup_secondary_cpu_via_nmi(int logical_apicid, unsigned long start_eip) { unsigned long send_status, accept_status = 0; @@ -538,7 +538,7 @@ wakeup_secondary_cpu_via_nmi(int logical_apicid, unsigned long start_eip) return (send_status | accept_status); } -static int __devinit +static int __cpuinit wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip) { unsigned long send_status, accept_status = 0; -- cgit v1.2.3 From 667c5296cc76fefe0abcb79228952b28d9af45e3 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sun, 19 Apr 2009 11:43:11 +0400 Subject: x86: es7000, uv - use __cpuinit for kicking secondary cpus The caller already has __cpuinit attribute. [ Impact: save memory, address section mismatch warning ] Signed-off-by: Cyrill Gorcunov Cc: Yinghai Lu Cc: Pavel Emelyanov LKML-Reference: <20090419074311.GA8670@lenovo> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/es7000_32.c | 2 +- arch/x86/kernel/apic/x2apic_uv_x.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c index 1c11b819f24..8e07c141866 100644 --- a/arch/x86/kernel/apic/es7000_32.c +++ b/arch/x86/kernel/apic/es7000_32.c @@ -145,7 +145,7 @@ es7000_rename_gsi(int ioapic, int gsi) return gsi; } -static int wakeup_secondary_cpu_via_mip(int cpu, unsigned long eip) +static int __cpuinit wakeup_secondary_cpu_via_mip(int cpu, unsigned long eip) { unsigned long vect = 0, psaival = 0; diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index de1a50af807..873bf7121e8 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -91,7 +91,7 @@ static void uv_vector_allocation_domain(int cpu, struct cpumask *retmask) cpumask_set_cpu(cpu, retmask); } -static int uv_wakeup_secondary(int phys_apicid, unsigned long start_rip) +static int __cpuinit uv_wakeup_secondary(int phys_apicid, unsigned long start_rip) { #ifdef CONFIG_SMP unsigned long val; -- cgit v1.2.3 From fc1edaf9e7cc4d4696f83dee495b8f158d01c4eb Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Mon, 20 Apr 2009 13:02:27 -0700 Subject: x86: x2apic, IR: Clean up X86_X2APIC and INTR_REMAP config checks Add x2apic_supported() to clean up CONFIG_X86_X2APIC checks. Fix CONFIG_INTR_REMAP checks. [ Impact: cleanup ] Signed-off-by: Suresh Siddha Cc: dwmw2@infradead.org Cc: Suresh Siddha Cc: Weidong Han LKML-Reference: <20090420200450.128993000@linux-os.sc.intel.com> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/apic.h | 10 ++++---- arch/x86/include/asm/io_apic.h | 2 -- arch/x86/include/asm/irq_remapping.h | 2 +- arch/x86/kernel/apic/apic.c | 49 +++++++++--------------------------- arch/x86/kernel/apic/io_apic.c | 2 -- arch/x86/kernel/apic/probe_64.c | 2 +- 6 files changed, 19 insertions(+), 48 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h index fbdd65446c7..3738438a91f 100644 --- a/arch/x86/include/asm/apic.h +++ b/arch/x86/include/asm/apic.h @@ -107,8 +107,7 @@ extern u32 native_safe_apic_wait_icr_idle(void); extern void native_apic_icr_write(u32 low, u32 id); extern u64 native_apic_icr_read(void); -#define EIM_8BIT_APIC_ID 0 -#define EIM_32BIT_APIC_ID 1 +extern int x2apic_mode; #ifdef CONFIG_X86_X2APIC /* @@ -166,7 +165,7 @@ static inline u64 native_x2apic_icr_read(void) return val; } -extern int x2apic, x2apic_phys; +extern int x2apic_phys; extern void check_x2apic(void); extern void enable_x2apic(void); extern void x2apic_icr_write(u32 low, u32 id); @@ -182,6 +181,8 @@ static inline int x2apic_enabled(void) return 1; return 0; } + +#define x2apic_supported() (cpu_has_x2apic) #else static inline void check_x2apic(void) { @@ -194,9 +195,8 @@ static inline int x2apic_enabled(void) return 0; } -#define x2apic 0 #define x2apic_preenabled 0 - +#define x2apic_supported() 0 #endif extern void enable_IR_x2apic(void); diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h index 9d826e43601..34eaa37f7ad 100644 --- a/arch/x86/include/asm/io_apic.h +++ b/arch/x86/include/asm/io_apic.h @@ -161,7 +161,6 @@ extern int io_apic_set_pci_routing(int ioapic, int pin, int irq, extern int (*ioapic_renumber_irq)(int ioapic, int irq); extern void ioapic_init_mappings(void); -#ifdef CONFIG_X86_64 extern struct IO_APIC_route_entry **alloc_ioapic_entries(void); extern void free_ioapic_entries(struct IO_APIC_route_entry **ioapic_entries); extern int save_IO_APIC_setup(struct IO_APIC_route_entry **ioapic_entries); @@ -169,7 +168,6 @@ extern void mask_IO_APIC_setup(struct IO_APIC_route_entry **ioapic_entries); extern int restore_IO_APIC_setup(struct IO_APIC_route_entry **ioapic_entries); extern void reinit_intr_remapped_IO_APIC(int intr_remapping, struct IO_APIC_route_entry **ioapic_entries); -#endif extern void probe_nr_irqs_gsi(void); diff --git a/arch/x86/include/asm/irq_remapping.h b/arch/x86/include/asm/irq_remapping.h index 0396760fccb..f275e224450 100644 --- a/arch/x86/include/asm/irq_remapping.h +++ b/arch/x86/include/asm/irq_remapping.h @@ -1,6 +1,6 @@ #ifndef _ASM_X86_IRQ_REMAPPING_H #define _ASM_X86_IRQ_REMAPPING_H -#define IRTE_DEST(dest) ((x2apic) ? dest : dest << 8) +#define IRTE_DEST(dest) ((x2apic_mode) ? dest : dest << 8) #endif /* _ASM_X86_IRQ_REMAPPING_H */ diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 7b41a32339e..2b30e520dce 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -134,8 +134,8 @@ static __init int setup_apicpmtimer(char *s) __setup("apicpmtimer", setup_apicpmtimer); #endif +int x2apic_mode; #ifdef CONFIG_X86_X2APIC -int x2apic; /* x2apic enabled before OS handover */ static int x2apic_preenabled; static int disable_x2apic; @@ -858,7 +858,7 @@ void clear_local_APIC(void) u32 v; /* APIC hasn't been mapped yet */ - if (!x2apic && !apic_phys) + if (!x2apic_mode && !apic_phys) return; maxlvt = lapic_get_maxlvt(); @@ -1330,7 +1330,7 @@ void check_x2apic(void) { if (x2apic_enabled()) { pr_info("x2apic enabled by BIOS, switching to x2apic ops\n"); - x2apic_preenabled = x2apic = 1; + x2apic_preenabled = x2apic_mode = 1; } } @@ -1338,7 +1338,7 @@ void enable_x2apic(void) { int msr, msr2; - if (!x2apic) + if (!x2apic_mode) return; rdmsr(MSR_IA32_APICBASE, msr, msr2); @@ -1390,25 +1390,17 @@ void __init enable_IR_x2apic(void) mask_IO_APIC_setup(ioapic_entries); mask_8259A(); -#ifdef CONFIG_X86_X2APIC - if (cpu_has_x2apic) - ret = enable_intr_remapping(EIM_32BIT_APIC_ID); - else -#endif - ret = enable_intr_remapping(EIM_8BIT_APIC_ID); - + ret = enable_intr_remapping(x2apic_supported()); if (ret) goto end_restore; pr_info("Enabled Interrupt-remapping\n"); -#ifdef CONFIG_X86_X2APIC - if (cpu_has_x2apic && !x2apic) { - x2apic = 1; + if (x2apic_supported() && !x2apic_mode) { + x2apic_mode = 1; enable_x2apic(); pr_info("Enabled x2apic\n"); } -#endif end_restore: if (ret) @@ -1576,7 +1568,7 @@ void __init early_init_lapic_mapping(void) */ void __init init_apic_mappings(void) { - if (x2apic) { + if (x2apic_mode) { boot_cpu_physical_apicid = read_apic_id(); return; } @@ -2010,10 +2002,10 @@ static int lapic_suspend(struct sys_device *dev, pm_message_t state) local_irq_save(flags); disable_local_APIC(); -#ifdef CONFIG_INTR_REMAP + if (intr_remapping_enabled) disable_intr_remapping(); -#endif + local_irq_restore(flags); return 0; } @@ -2023,8 +2015,6 @@ static int lapic_resume(struct sys_device *dev) unsigned int l, h; unsigned long flags; int maxlvt; - -#ifdef CONFIG_INTR_REMAP int ret; struct IO_APIC_route_entry **ioapic_entries = NULL; @@ -2050,17 +2040,8 @@ static int lapic_resume(struct sys_device *dev) mask_8259A(); } - if (x2apic) + if (x2apic_mode) enable_x2apic(); -#else - if (!apic_pm_state.active) - return 0; - - local_irq_save(flags); - if (x2apic) - enable_x2apic(); -#endif - else { /* * Make sure the APICBASE points to the right address @@ -2098,18 +2079,12 @@ static int lapic_resume(struct sys_device *dev) apic_write(APIC_ESR, 0); apic_read(APIC_ESR); -#ifdef CONFIG_INTR_REMAP if (intr_remapping_enabled) { - if (x2apic) - reenable_intr_remapping(EIM_32BIT_APIC_ID); - else - reenable_intr_remapping(EIM_8BIT_APIC_ID); - + reenable_intr_remapping(x2apic_mode); unmask_8259A(); restore_IO_APIC_setup(ioapic_entries); free_ioapic_entries(ioapic_entries); } -#endif local_irq_restore(flags); diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index ea22a86e3cd..3a45d2ec974 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -736,7 +736,6 @@ static int __init ioapic_pirq_setup(char *str) __setup("pirq=", ioapic_pirq_setup); #endif /* CONFIG_X86_32 */ -#ifdef CONFIG_INTR_REMAP struct IO_APIC_route_entry **alloc_ioapic_entries(void) { int apic; @@ -857,7 +856,6 @@ void free_ioapic_entries(struct IO_APIC_route_entry **ioapic_entries) kfree(ioapic_entries); } -#endif /* * Find the IRQ entry number of a certain pin. diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c index 1783652bb0e..bc3e880f9b8 100644 --- a/arch/x86/kernel/apic/probe_64.c +++ b/arch/x86/kernel/apic/probe_64.c @@ -50,7 +50,7 @@ static struct apic *apic_probe[] __initdata = { void __init default_setup_apic_routing(void) { #ifdef CONFIG_X86_X2APIC - if (x2apic && (apic != &apic_x2apic_phys && + if (x2apic_mode && (apic != &apic_x2apic_phys && #ifdef CONFIG_X86_UV apic != &apic_x2apic_uv_x && #endif -- cgit v1.2.3 From 25629d810a52176758401184d9b437fbb7f79195 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Mon, 20 Apr 2009 13:02:28 -0700 Subject: x86: x2apic, IR: Move eoi_ioapic_irq() into a CONFIG_INTR_REMAP section Address the following complier warning: arch/x86/kernel/apic/io_apic.c:2543: warning: `eoi_ioapic_irq' defined but not used By moving that function (and eoi_ioapic_irq()) into an existing #ifdef CONFIG_INTR_REMAP section of the code. [ Impact: cleanup ] Signed-off-by: Suresh Siddha Cc: dwmw2@infradead.org Cc: Weidong Han LKML-Reference: <20090420200450.271099000@linux-os.sc.intel.com> Signed-off-by: Ingo Molnar Cc: Weidong Han --- arch/x86/kernel/apic/io_apic.c | 66 +++++++++++++++++++++--------------------- 1 file changed, 33 insertions(+), 33 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 3a45d2ec974..4baa9cbd630 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -2517,39 +2517,6 @@ static void irq_complete_move(struct irq_desc **descp) static inline void irq_complete_move(struct irq_desc **descp) {} #endif -static void __eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg) -{ - int apic, pin; - struct irq_pin_list *entry; - - entry = cfg->irq_2_pin; - for (;;) { - - if (!entry) - break; - - apic = entry->apic; - pin = entry->pin; - io_apic_eoi(apic, pin); - entry = entry->next; - } -} - -static void -eoi_ioapic_irq(struct irq_desc *desc) -{ - struct irq_cfg *cfg; - unsigned long flags; - unsigned int irq; - - irq = desc->irq; - cfg = desc->chip_data; - - spin_lock_irqsave(&ioapic_lock, flags); - __eoi_ioapic_irq(irq, cfg); - spin_unlock_irqrestore(&ioapic_lock, flags); -} - static void ack_apic_edge(unsigned int irq) { struct irq_desc *desc = irq_to_desc(irq); @@ -2659,6 +2626,39 @@ static void ack_apic_level(unsigned int irq) } #ifdef CONFIG_INTR_REMAP +static void __eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg) +{ + int apic, pin; + struct irq_pin_list *entry; + + entry = cfg->irq_2_pin; + for (;;) { + + if (!entry) + break; + + apic = entry->apic; + pin = entry->pin; + io_apic_eoi(apic, pin); + entry = entry->next; + } +} + +static void +eoi_ioapic_irq(struct irq_desc *desc) +{ + struct irq_cfg *cfg; + unsigned long flags; + unsigned int irq; + + irq = desc->irq; + cfg = desc->chip_data; + + spin_lock_irqsave(&ioapic_lock, flags); + __eoi_ioapic_irq(irq, cfg); + spin_unlock_irqrestore(&ioapic_lock, flags); +} + static void ir_ack_apic_edge(unsigned int irq) { ack_APIC_irq(); -- cgit v1.2.3 From 39d83a5d684a457046aa2a6dac60f105966e78e9 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Mon, 20 Apr 2009 13:02:29 -0700 Subject: x86: x2apic, IR: Clean up panic() with nox2apic boot option Instead of panic() ignore the "nox2apic" boot option when BIOS has already enabled x2apic prior to OS handover. [ Impact: printk warning instead of panic() when BIOS has enabled x2apic already ] Signed-off-by: Suresh Siddha Cc: dwmw2@infradead.org Cc: Weidong Han LKML-Reference: <20090420200450.425091000@linux-os.sc.intel.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/apic.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 2b30e520dce..d32f5589f1d 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -141,8 +141,12 @@ static int x2apic_preenabled; static int disable_x2apic; static __init int setup_nox2apic(char *str) { - if (x2apic_enabled()) - panic("Bios already enabled x2apic, can't enforce nox2apic"); + if (x2apic_enabled()) { + pr_warning("Bios already enabled x2apic, " + "can't enforce nox2apic"); + return 0; + } + disable_x2apic = 1; setup_clear_cpu_cap(X86_FEATURE_X2APIC); return 0; -- cgit v1.2.3 From 9d6c26e73bd248c286bb3597aaf788716e8fcceb Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Mon, 20 Apr 2009 13:02:31 -0700 Subject: x86: x2apic, IR: Make config X86_UV dependent on X86_X2APIC Instead of selecting X86_X2APIC, make config X86_UV dependent on X86_X2APIC. This will eliminate enabling CONFIG_X86_X2APIC with out enabling CONFIG_INTR_REMAP. [ Impact: cleanup ] Signed-off-by: Suresh Siddha Acked-by: Jack Steiner Cc: dwmw2@infradead.org Cc: Suresh Siddha Cc: Weidong Han LKML-Reference: <20090420200450.694598000@linux-os.sc.intel.com> Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index c9086e6307a..58fb7b3bcd1 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -354,7 +354,7 @@ config X86_UV depends on X86_64 depends on X86_EXTENDED_PLATFORM depends on NUMA - select X86_X2APIC + depends on X86_X2APIC ---help--- This option is needed in order to support SGI Ultraviolet systems. If you don't have one of these, you should say N here. -- cgit v1.2.3 From ff166cb57a17124af75714a9c11f448f56f1a4a3 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Mon, 20 Apr 2009 13:02:30 -0700 Subject: x86: x2apic, IR: remove reinit_intr_remapped_IO_APIC() When interrupt-remapping is enabled, we are relying on setup_IO_APIC_irqs() to configure remapped entries in the IO-APIC, which comes little bit later after enabling interrupt-remapping. Meanwhile, restoration of old io-apic entries after enabling interrupt-remapping will not make the interrupts through io-apic functional anyway. So remove the unnecessary reinit_intr_remapped_IO_APIC() step. The longer story: When interrupt-remapping is enabled, IO-APIC entries need to be setup in the re-mappable format (pointing to interrupt-remapping table entries setup by the OS). This remapping configuration is happening in the same place where we traditionally configure IO-APIC (i.e., in setup_IO_APIC_irqs()). So when we enable interrupt-remapping successfully, there is no need to restore old io-apic RTE entries before we actually do a complete configuration shortly in setup_IO_APIC_irqs(). Old IO-APIC RTE's may be in traditional format (non re-mappable) or in re-mappable format pointing to interrupt-remapping table entries setup by BIOS. Restoring both of these will not make IO-APIC functional. We have to rely on setup_IO_APIC_irqs() for proper configuration by OS. So I am removing this unnecessary and broken step. [ Impact: remove unnecessary/broken IO-APIC setup step ] Signed-off-by: Suresh Siddha Acked-by: Weidong Han Cc: dwmw2@infradead.org LKML-Reference: <20090420200450.552359000@linux-os.sc.intel.com> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/io_apic.h | 2 -- arch/x86/kernel/apic/apic.c | 2 -- arch/x86/kernel/apic/io_apic.c | 14 -------------- 3 files changed, 18 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h index 34eaa37f7ad..1cf145039ee 100644 --- a/arch/x86/include/asm/io_apic.h +++ b/arch/x86/include/asm/io_apic.h @@ -166,8 +166,6 @@ extern void free_ioapic_entries(struct IO_APIC_route_entry **ioapic_entries); extern int save_IO_APIC_setup(struct IO_APIC_route_entry **ioapic_entries); extern void mask_IO_APIC_setup(struct IO_APIC_route_entry **ioapic_entries); extern int restore_IO_APIC_setup(struct IO_APIC_route_entry **ioapic_entries); -extern void reinit_intr_remapped_IO_APIC(int intr_remapping, - struct IO_APIC_route_entry **ioapic_entries); extern void probe_nr_irqs_gsi(void); diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index d32f5589f1d..1386dbec552 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1412,8 +1412,6 @@ end_restore: * IR enabling failed */ restore_IO_APIC_setup(ioapic_entries); - else - reinit_intr_remapped_IO_APIC(x2apic_preenabled, ioapic_entries); unmask_8259A(); local_irq_restore(flags); diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 4baa9cbd630..8aef5f9d947 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -833,20 +833,6 @@ int restore_IO_APIC_setup(struct IO_APIC_route_entry **ioapic_entries) return 0; } -void reinit_intr_remapped_IO_APIC(int intr_remapping, - struct IO_APIC_route_entry **ioapic_entries) - -{ - /* - * for now plain restore of previous settings. - * TBD: In the case of OS enabling interrupt-remapping, - * IO-APIC RTE's need to be setup to point to interrupt-remapping - * table entries. for now, do a plain restore, and wait for - * the setup_IO_APIC_irqs() to do proper initialization. - */ - restore_IO_APIC_setup(ioapic_entries); -} - void free_ioapic_entries(struct IO_APIC_route_entry **ioapic_entries) { int apic; -- cgit v1.2.3 From b2ba83ff4f4405cebc10884121ee71338a1a6c94 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sun, 26 Apr 2009 23:38:08 -0700 Subject: x86: apic: Remove duplicated macros XAPIC_DEST_* is dupliicated to the one in apicdef.h [ Impact: cleanup ] Signed-off-by: Yinghai Lu LKML-Reference: <49F552D0.5050505@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/summit_32.c | 7 ------- 1 file changed, 7 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/summit_32.c b/arch/x86/kernel/apic/summit_32.c index 9cfe1f415d8..344eee4ac0a 100644 --- a/arch/x86/kernel/apic/summit_32.c +++ b/arch/x86/kernel/apic/summit_32.c @@ -173,13 +173,6 @@ static inline int is_WPEG(struct rio_detail *rio){ rio->type == LookOutAWPEG || rio->type == LookOutBWPEG); } - -/* In clustered mode, the high nibble of APIC ID is a cluster number. - * The low nibble is a 4-bit bitmap. */ -#define XAPIC_DEST_CPUS_SHIFT 4 -#define XAPIC_DEST_CPUS_MASK ((1u << XAPIC_DEST_CPUS_SHIFT) - 1) -#define XAPIC_DEST_CLUSTER_MASK (XAPIC_DEST_CPUS_MASK << XAPIC_DEST_CPUS_SHIFT) - #define SUMMIT_APIC_DFR_VALUE (APIC_DFR_CLUSTER) static const struct cpumask *summit_target_cpus(void) -- cgit v1.2.3 From e0e42142bab96404de535cceb85d6533d5ad7942 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sun, 26 Apr 2009 23:39:38 -0700 Subject: x86: Use dmi check in apic_is_clustered() on 64-bit to mark the TSC unstable We will have systems with 2 and more sockets 8cores/2thread, but we treat them as multi chassis - while they could have a stable TSC domain. Use DMI check instead. [ Impact: do not turn possibly stable TSCs off incorrectly ] Signed-off-by: Yinghai Lu Cc: Ravikiran Thirumalai LKML-Reference: <49F5532A.5000802@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/apic.c | 86 +++++++++++++++++++++++++++++++-------------- 1 file changed, 59 insertions(+), 27 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 1386dbec552..28f747d61d7 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -2138,31 +2138,14 @@ static void apic_pm_activate(void) { } #endif /* CONFIG_PM */ #ifdef CONFIG_X86_64 -/* - * apic_is_clustered_box() -- Check if we can expect good TSC - * - * Thus far, the major user of this is IBM's Summit2 series: - * - * Clustered boxes may have unsynced TSC problems if they are - * multi-chassis. Use available data to take a good guess. - * If in doubt, go HPET. - */ -__cpuinit int apic_is_clustered_box(void) + +static int __cpuinit apic_cluster_num(void) { int i, clusters, zeros; unsigned id; u16 *bios_cpu_apicid; DECLARE_BITMAP(clustermap, NUM_APIC_CLUSTERS); - /* - * there is not this kind of box with AMD CPU yet. - * Some AMD box with quadcore cpu and 8 sockets apicid - * will be [4, 0x23] or [8, 0x27] could be thought to - * vsmp box still need checking... - */ - if ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) && !is_vsmp_box()) - return 0; - bios_cpu_apicid = early_per_cpu_ptr(x86_bios_cpu_apicid); bitmap_zero(clustermap, NUM_APIC_CLUSTERS); @@ -2198,18 +2181,67 @@ __cpuinit int apic_is_clustered_box(void) ++zeros; } - /* ScaleMP vSMPowered boxes have one cluster per board and TSCs are - * not guaranteed to be synced between boards - */ - if (is_vsmp_box() && clusters > 1) + return clusters; +} + +static int __cpuinitdata multi_checked; +static int __cpuinitdata multi; + +static int __cpuinit set_multi(const struct dmi_system_id *d) +{ + if (multi) + return 0; + printk(KERN_INFO "APIC: %s detected, Multi Chassis\n", d->ident); + multi = 1; + return 0; +} + +static const __cpuinitconst struct dmi_system_id multi_dmi_table[] = { + { + .callback = set_multi, + .ident = "IBM System Summit2", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "IBM"), + DMI_MATCH(DMI_PRODUCT_NAME, "Summit2"), + }, + }, + {} +}; + +static void __cpuinit dmi_check_multi(void) +{ + if (multi_checked) + return; + + dmi_check_system(multi_dmi_table); + multi_checked = 1; +} + +/* + * apic_is_clustered_box() -- Check if we can expect good TSC + * + * Thus far, the major user of this is IBM's Summit2 series: + * Clustered boxes may have unsynced TSC problems if they are + * multi-chassis. + * Use DMI to check them + */ +__cpuinit int apic_is_clustered_box(void) +{ + dmi_check_multi(); + if (multi) return 1; + if (!is_vsmp_box()) + return 0; + /* - * If clusters > 2, then should be multi-chassis. - * May have to revisit this when multi-core + hyperthreaded CPUs come - * out, but AFAIK this will work even for them. + * ScaleMP vSMPowered boxes have one cluster per board and TSCs are + * not guaranteed to be synced between boards */ - return (clusters > 2); + if (apic_cluster_num() > 1) + return 1; + + return 0; } #endif -- cgit v1.2.3 From fcef5911c7ea89b80d5bfc727f402f37c9eefd57 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 27 Apr 2009 17:58:23 -0700 Subject: x86/irq: remove leftover code from NUMA_MIGRATE_IRQ_DESC The original feature of migrating irq_desc dynamic was too fragile and was causing problems: it caused crashes on systems with lots of cards with MSI-X when user-space irq-balancer was enabled. We now have new patches that create irq_desc according to device numa node. This patch removes the leftover bits of the dynamic balancer. [ Impact: remove dead code ] Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: Suresh Siddha Cc: "Eric W. Biederman" Cc: Rusty Russell LKML-Reference: <49F654AF.8000808@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 10 ------- arch/x86/configs/x86_64_defconfig | 1 - arch/x86/kernel/apic/io_apic.c | 56 +++------------------------------------ 3 files changed, 4 insertions(+), 63 deletions(-) (limited to 'arch') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index df9e885eee1..e1b2543f8ed 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -274,16 +274,6 @@ config SPARSE_IRQ If you don't know what to do here, say N. -config NUMA_MIGRATE_IRQ_DESC - bool "Move irq desc when changing irq smp_affinity" - depends on SPARSE_IRQ && NUMA - depends on BROKEN - default n - ---help--- - This enables moving irq_desc to cpu/node that irq will use handled. - - If you don't know what to do here, say N. - config X86_MPPARSE bool "Enable MPS table" if ACPI default y diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig index 9fe5d212ab4..27b8ce0f590 100644 --- a/arch/x86/configs/x86_64_defconfig +++ b/arch/x86/configs/x86_64_defconfig @@ -195,7 +195,6 @@ CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_SPARSE_IRQ=y -# CONFIG_NUMA_MIGRATE_IRQ_DESC is not set CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y # CONFIG_X86_ELAN is not set diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 30da617d18e..9fbf0f7ec7e 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -148,9 +148,6 @@ struct irq_cfg { unsigned move_cleanup_count; u8 vector; u8 move_in_progress : 1; -#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC - u8 move_desc_pending : 1; -#endif }; /* irq_cfg is indexed by the sum of all RTEs in all I/O APICs. */ @@ -254,8 +251,7 @@ int arch_init_chip_data(struct irq_desc *desc, int cpu) return 0; } -#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC - +/* for move_irq_desc */ static void init_copy_irq_2_pin(struct irq_cfg *old_cfg, struct irq_cfg *cfg, int cpu) { @@ -356,19 +352,7 @@ void arch_free_chip_data(struct irq_desc *old_desc, struct irq_desc *desc) old_desc->chip_data = NULL; } } - -static void -set_extra_move_desc(struct irq_desc *desc, const struct cpumask *mask) -{ - struct irq_cfg *cfg = desc->chip_data; - - if (!cfg->move_in_progress) { - /* it means that domain is not changed */ - if (!cpumask_intersects(desc->affinity, mask)) - cfg->move_desc_pending = 1; - } -} -#endif +/* end for move_irq_desc */ #else static struct irq_cfg *irq_cfg(unsigned int irq) @@ -378,13 +362,6 @@ static struct irq_cfg *irq_cfg(unsigned int irq) #endif -#ifndef CONFIG_NUMA_MIGRATE_IRQ_DESC -static inline void -set_extra_move_desc(struct irq_desc *desc, const struct cpumask *mask) -{ -} -#endif - struct io_apic { unsigned int index; unsigned int unused[3]; @@ -592,9 +569,6 @@ set_desc_affinity(struct irq_desc *desc, const struct cpumask *mask) if (assign_irq_vector(irq, cfg, mask)) return BAD_APICID; - /* check that before desc->addinity get updated */ - set_extra_move_desc(desc, mask); - cpumask_copy(desc->affinity, mask); return apic->cpu_mask_to_apicid_and(desc->affinity, cfg->domain); @@ -2393,8 +2367,6 @@ migrate_ioapic_irq_desc(struct irq_desc *desc, const struct cpumask *mask) if (assign_irq_vector(irq, cfg, mask)) return; - set_extra_move_desc(desc, mask); - dest = apic->cpu_mask_to_apicid_and(cfg->domain, mask); irte.vector = cfg->vector; @@ -2491,34 +2463,14 @@ static void irq_complete_move(struct irq_desc **descp) struct irq_cfg *cfg = desc->chip_data; unsigned vector, me; - if (likely(!cfg->move_in_progress)) { -#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC - if (likely(!cfg->move_desc_pending)) - return; - - /* domain has not changed, but affinity did */ - me = smp_processor_id(); - if (cpumask_test_cpu(me, desc->affinity)) { - *descp = desc = move_irq_desc(desc, me); - /* get the new one */ - cfg = desc->chip_data; - cfg->move_desc_pending = 0; - } -#endif + if (likely(!cfg->move_in_progress)) return; - } vector = ~get_irq_regs()->orig_ax; me = smp_processor_id(); - if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain)) { -#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC - *descp = desc = move_irq_desc(desc, me); - /* get the new one */ - cfg = desc->chip_data; -#endif + if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain)) send_cleanup_vector(cfg); - } } #else static inline void irq_complete_move(struct irq_desc **descp) {} -- cgit v1.2.3 From d5dedd4507d307eb3f35f21b6e16f336fdc0d82a Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 27 Apr 2009 17:59:21 -0700 Subject: irq: change ->set_affinity() to return status according to Ingo, change set_affinity() in irq_chip should return int, because that way we can handle failure cases in a much cleaner way, in the genirq layer. v2: fix two typos [ Impact: extend API ] Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: Suresh Siddha Cc: "Eric W. Biederman" Cc: Rusty Russell Cc: linux-arch@vger.kernel.org LKML-Reference: <49F654E9.4070809@kernel.org> Signed-off-by: Ingo Molnar --- arch/alpha/kernel/sys_dp264.c | 8 +++-- arch/alpha/kernel/sys_titan.c | 4 ++- arch/arm/common/gic.c | 4 ++- arch/cris/arch-v32/kernel/irq.c | 4 ++- arch/ia64/hp/sim/hpsim_irq.c | 3 +- arch/ia64/kernel/iosapic.c | 10 +++--- arch/ia64/kernel/msi_ia64.c | 16 +++++---- arch/ia64/sn/kernel/irq.c | 4 ++- arch/ia64/sn/kernel/msi_sn.c | 8 +++-- arch/mips/cavium-octeon/octeon-irq.c | 8 +++-- arch/mips/include/asm/irq.h | 2 +- arch/mips/kernel/irq-gic.c | 5 +-- arch/mips/mti-malta/malta-smtc.c | 4 ++- arch/mips/sibyte/bcm1480/irq.c | 8 +++-- arch/mips/sibyte/sb1250/irq.c | 8 +++-- arch/parisc/kernel/irq.c | 6 ++-- arch/powerpc/platforms/pseries/xics.c | 12 ++++--- arch/powerpc/sysdev/mpic.c | 4 ++- arch/sparc/kernel/irq_64.c | 12 +++++-- arch/x86/kernel/apic/io_apic.c | 64 ++++++++++++++++++++++------------- 20 files changed, 128 insertions(+), 66 deletions(-) (limited to 'arch') diff --git a/arch/alpha/kernel/sys_dp264.c b/arch/alpha/kernel/sys_dp264.c index 9c9d1fd4155..5bd5259324b 100644 --- a/arch/alpha/kernel/sys_dp264.c +++ b/arch/alpha/kernel/sys_dp264.c @@ -176,22 +176,26 @@ cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity) } } -static void +static int dp264_set_affinity(unsigned int irq, const struct cpumask *affinity) { spin_lock(&dp264_irq_lock); cpu_set_irq_affinity(irq, *affinity); tsunami_update_irq_hw(cached_irq_mask); spin_unlock(&dp264_irq_lock); + + return 0; } -static void +static int clipper_set_affinity(unsigned int irq, const struct cpumask *affinity) { spin_lock(&dp264_irq_lock); cpu_set_irq_affinity(irq - 16, *affinity); tsunami_update_irq_hw(cached_irq_mask); spin_unlock(&dp264_irq_lock); + + return 0; } static struct hw_interrupt_type dp264_irq_type = { diff --git a/arch/alpha/kernel/sys_titan.c b/arch/alpha/kernel/sys_titan.c index 27f840a4ad3..8dd239ebdb9 100644 --- a/arch/alpha/kernel/sys_titan.c +++ b/arch/alpha/kernel/sys_titan.c @@ -157,13 +157,15 @@ titan_cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity) } -static void +static int titan_set_irq_affinity(unsigned int irq, const struct cpumask *affinity) { spin_lock(&titan_irq_lock); titan_cpu_set_irq_affinity(irq - 16, *affinity); titan_update_irq_hw(titan_cached_irq_mask); spin_unlock(&titan_irq_lock); + + return 0; } static void diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index c6884ba1d5e..90f6b7f52d4 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -109,7 +109,7 @@ static void gic_unmask_irq(unsigned int irq) } #ifdef CONFIG_SMP -static void gic_set_cpu(unsigned int irq, const struct cpumask *mask_val) +static int gic_set_cpu(unsigned int irq, const struct cpumask *mask_val) { void __iomem *reg = gic_dist_base(irq) + GIC_DIST_TARGET + (gic_irq(irq) & ~3); unsigned int shift = (irq % 4) * 8; @@ -122,6 +122,8 @@ static void gic_set_cpu(unsigned int irq, const struct cpumask *mask_val) val |= 1 << (cpu + shift); writel(val, reg); spin_unlock(&irq_controller_lock); + + return 0; } #endif diff --git a/arch/cris/arch-v32/kernel/irq.c b/arch/cris/arch-v32/kernel/irq.c index df3925cb1c7..d70b445f4a8 100644 --- a/arch/cris/arch-v32/kernel/irq.c +++ b/arch/cris/arch-v32/kernel/irq.c @@ -325,12 +325,14 @@ static void end_crisv32_irq(unsigned int irq) { } -void set_affinity_crisv32_irq(unsigned int irq, const struct cpumask *dest) +int set_affinity_crisv32_irq(unsigned int irq, const struct cpumask *dest) { unsigned long flags; spin_lock_irqsave(&irq_lock, flags); irq_allocations[irq - FIRST_IRQ].mask = *dest; spin_unlock_irqrestore(&irq_lock, flags); + + return 0; } static struct irq_chip crisv32_irq_type = { diff --git a/arch/ia64/hp/sim/hpsim_irq.c b/arch/ia64/hp/sim/hpsim_irq.c index cc0a3182db3..acb5047ab57 100644 --- a/arch/ia64/hp/sim/hpsim_irq.c +++ b/arch/ia64/hp/sim/hpsim_irq.c @@ -21,9 +21,10 @@ hpsim_irq_noop (unsigned int irq) { } -static void +static int hpsim_set_affinity_noop(unsigned int a, const struct cpumask *b) { + return 0; } static struct hw_interrupt_type irq_type_hp_sim = { diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c index 166e0d839fa..f92cef47bf8 100644 --- a/arch/ia64/kernel/iosapic.c +++ b/arch/ia64/kernel/iosapic.c @@ -329,7 +329,7 @@ unmask_irq (unsigned int irq) } -static void +static int iosapic_set_affinity(unsigned int irq, const struct cpumask *mask) { #ifdef CONFIG_SMP @@ -343,15 +343,15 @@ iosapic_set_affinity(unsigned int irq, const struct cpumask *mask) cpu = cpumask_first_and(cpu_online_mask, mask); if (cpu >= nr_cpu_ids) - return; + return -1; if (irq_prepare_move(irq, cpu)) - return; + return -1; dest = cpu_physical_id(cpu); if (!iosapic_intr_info[irq].count) - return; /* not an IOSAPIC interrupt */ + return -1; /* not an IOSAPIC interrupt */ set_irq_affinity_info(irq, dest, redir); @@ -376,7 +376,9 @@ iosapic_set_affinity(unsigned int irq, const struct cpumask *mask) iosapic_write(iosapic, IOSAPIC_RTE_HIGH(rte_index), high32); iosapic_write(iosapic, IOSAPIC_RTE_LOW(rte_index), low32); } + #endif + return 0; } /* diff --git a/arch/ia64/kernel/msi_ia64.c b/arch/ia64/kernel/msi_ia64.c index 2b15e233f7f..0f8ade9331b 100644 --- a/arch/ia64/kernel/msi_ia64.c +++ b/arch/ia64/kernel/msi_ia64.c @@ -12,7 +12,7 @@ static struct irq_chip ia64_msi_chip; #ifdef CONFIG_SMP -static void ia64_set_msi_irq_affinity(unsigned int irq, +static int ia64_set_msi_irq_affinity(unsigned int irq, const cpumask_t *cpu_mask) { struct msi_msg msg; @@ -20,10 +20,10 @@ static void ia64_set_msi_irq_affinity(unsigned int irq, int cpu = first_cpu(*cpu_mask); if (!cpu_online(cpu)) - return; + return -1; if (irq_prepare_move(irq, cpu)) - return; + return -1; read_msi_msg(irq, &msg); @@ -39,6 +39,8 @@ static void ia64_set_msi_irq_affinity(unsigned int irq, write_msi_msg(irq, &msg); cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu)); + + return 0; } #endif /* CONFIG_SMP */ @@ -130,17 +132,17 @@ void arch_teardown_msi_irq(unsigned int irq) #ifdef CONFIG_DMAR #ifdef CONFIG_SMP -static void dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask) +static int dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask) { struct irq_cfg *cfg = irq_cfg + irq; struct msi_msg msg; int cpu = cpumask_first(mask); if (!cpu_online(cpu)) - return; + return -1; if (irq_prepare_move(irq, cpu)) - return; + return -1; dmar_msi_read(irq, &msg); @@ -151,6 +153,8 @@ static void dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask) dmar_msi_write(irq, &msg); cpumask_copy(irq_desc[irq].affinity, mask); + + return 0; } #endif /* CONFIG_SMP */ diff --git a/arch/ia64/sn/kernel/irq.c b/arch/ia64/sn/kernel/irq.c index 66fd705e82c..764f26abac0 100644 --- a/arch/ia64/sn/kernel/irq.c +++ b/arch/ia64/sn/kernel/irq.c @@ -227,7 +227,7 @@ finish_up: return new_irq_info; } -static void sn_set_affinity_irq(unsigned int irq, const struct cpumask *mask) +static int sn_set_affinity_irq(unsigned int irq, const struct cpumask *mask) { struct sn_irq_info *sn_irq_info, *sn_irq_info_safe; nasid_t nasid; @@ -239,6 +239,8 @@ static void sn_set_affinity_irq(unsigned int irq, const struct cpumask *mask) list_for_each_entry_safe(sn_irq_info, sn_irq_info_safe, sn_irq_lh[irq], list) (void)sn_retarget_vector(sn_irq_info, nasid, slice); + + return 0; } #ifdef CONFIG_SMP diff --git a/arch/ia64/sn/kernel/msi_sn.c b/arch/ia64/sn/kernel/msi_sn.c index 81e428943d7..fbbfb970120 100644 --- a/arch/ia64/sn/kernel/msi_sn.c +++ b/arch/ia64/sn/kernel/msi_sn.c @@ -151,7 +151,7 @@ int sn_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *entry) } #ifdef CONFIG_SMP -static void sn_set_msi_irq_affinity(unsigned int irq, +static int sn_set_msi_irq_affinity(unsigned int irq, const struct cpumask *cpu_mask) { struct msi_msg msg; @@ -168,7 +168,7 @@ static void sn_set_msi_irq_affinity(unsigned int irq, cpu = cpumask_first(cpu_mask); sn_irq_info = sn_msi_info[irq].sn_irq_info; if (sn_irq_info == NULL || sn_irq_info->irq_int_bit >= 0) - return; + return -1; /* * Release XIO resources for the old MSI PCI address @@ -189,7 +189,7 @@ static void sn_set_msi_irq_affinity(unsigned int irq, new_irq_info = sn_retarget_vector(sn_irq_info, nasid, slice); sn_msi_info[irq].sn_irq_info = new_irq_info; if (new_irq_info == NULL) - return; + return -1; /* * Map the xio address into bus space @@ -206,6 +206,8 @@ static void sn_set_msi_irq_affinity(unsigned int irq, write_msi_msg(irq, &msg); cpumask_copy(irq_desc[irq].affinity, cpu_mask); + + return 0; } #endif /* CONFIG_SMP */ diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c index 1c19af8daa6..d3a0c8154be 100644 --- a/arch/mips/cavium-octeon/octeon-irq.c +++ b/arch/mips/cavium-octeon/octeon-irq.c @@ -177,7 +177,7 @@ static void octeon_irq_ciu0_disable(unsigned int irq) } #ifdef CONFIG_SMP -static void octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask *dest) +static int octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask *dest) { int cpu; int bit = irq - OCTEON_IRQ_WORKQ0; /* Bit 0-63 of EN0 */ @@ -199,6 +199,8 @@ static void octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask */ cvmx_read_csr(CVMX_CIU_INTX_EN0(cvmx_get_core_num() * 2)); write_unlock(&octeon_irq_ciu0_rwlock); + + return 0; } #endif @@ -292,7 +294,7 @@ static void octeon_irq_ciu1_disable(unsigned int irq) } #ifdef CONFIG_SMP -static void octeon_irq_ciu1_set_affinity(unsigned int irq, const struct cpumask *dest) +static int octeon_irq_ciu1_set_affinity(unsigned int irq, const struct cpumask *dest) { int cpu; int bit = irq - OCTEON_IRQ_WDOG0; /* Bit 0-63 of EN1 */ @@ -315,6 +317,8 @@ static void octeon_irq_ciu1_set_affinity(unsigned int irq, const struct cpumask */ cvmx_read_csr(CVMX_CIU_INTX_EN1(cvmx_get_core_num() * 2 + 1)); write_unlock(&octeon_irq_ciu1_rwlock); + + return 0; } #endif diff --git a/arch/mips/include/asm/irq.h b/arch/mips/include/asm/irq.h index 3214ade02d1..4f1eed107b0 100644 --- a/arch/mips/include/asm/irq.h +++ b/arch/mips/include/asm/irq.h @@ -49,7 +49,7 @@ static inline void smtc_im_ack_irq(unsigned int irq) #ifdef CONFIG_MIPS_MT_SMTC_IRQAFF #include -extern void plat_set_irq_affinity(unsigned int irq, +extern int plat_set_irq_affinity(unsigned int irq, const struct cpumask *affinity); extern void smtc_forward_irq(unsigned int irq); diff --git a/arch/mips/kernel/irq-gic.c b/arch/mips/kernel/irq-gic.c index 87deb8f6c45..3f43c2e3aa5 100644 --- a/arch/mips/kernel/irq-gic.c +++ b/arch/mips/kernel/irq-gic.c @@ -155,7 +155,7 @@ static void gic_unmask_irq(unsigned int irq) static DEFINE_SPINLOCK(gic_lock); -static void gic_set_affinity(unsigned int irq, const struct cpumask *cpumask) +static int gic_set_affinity(unsigned int irq, const struct cpumask *cpumask) { cpumask_t tmp = CPU_MASK_NONE; unsigned long flags; @@ -166,7 +166,7 @@ static void gic_set_affinity(unsigned int irq, const struct cpumask *cpumask) cpumask_and(&tmp, cpumask, cpu_online_mask); if (cpus_empty(tmp)) - return; + return -1; /* Assumption : cpumask refers to a single CPU */ spin_lock_irqsave(&gic_lock, flags); @@ -190,6 +190,7 @@ static void gic_set_affinity(unsigned int irq, const struct cpumask *cpumask) cpumask_copy(irq_desc[irq].affinity, cpumask); spin_unlock_irqrestore(&gic_lock, flags); + return 0; } #endif diff --git a/arch/mips/mti-malta/malta-smtc.c b/arch/mips/mti-malta/malta-smtc.c index 5ba31888fef..499ffe5475d 100644 --- a/arch/mips/mti-malta/malta-smtc.c +++ b/arch/mips/mti-malta/malta-smtc.c @@ -114,7 +114,7 @@ struct plat_smp_ops msmtc_smp_ops = { */ -void plat_set_irq_affinity(unsigned int irq, const struct cpumask *affinity) +int plat_set_irq_affinity(unsigned int irq, const struct cpumask *affinity) { cpumask_t tmask; int cpu = 0; @@ -156,5 +156,7 @@ void plat_set_irq_affinity(unsigned int irq, const struct cpumask *affinity) /* Do any generic SMTC IRQ affinity setup */ smtc_set_irq_affinity(irq, tmask); + + return 0; } #endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */ diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c index 352352b3cb2..4f256a131bf 100644 --- a/arch/mips/sibyte/bcm1480/irq.c +++ b/arch/mips/sibyte/bcm1480/irq.c @@ -50,7 +50,7 @@ static void enable_bcm1480_irq(unsigned int irq); static void disable_bcm1480_irq(unsigned int irq); static void ack_bcm1480_irq(unsigned int irq); #ifdef CONFIG_SMP -static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask); +static int bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask); #endif #ifdef CONFIG_PCI @@ -109,7 +109,7 @@ void bcm1480_unmask_irq(int cpu, int irq) } #ifdef CONFIG_SMP -static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask) +static int bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask) { int i = 0, old_cpu, cpu, int_on, k; u64 cur_ints; @@ -119,7 +119,7 @@ static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask) if (cpumask_weight(mask) != 1) { printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq); - return; + return -1; } i = cpumask_first(mask); @@ -155,6 +155,8 @@ static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask) } spin_unlock(&bcm1480_imr_lock); spin_unlock_irqrestore(&desc->lock, flags); + + return 0; } #endif diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c index c08ff582da6..e389507f1f9 100644 --- a/arch/mips/sibyte/sb1250/irq.c +++ b/arch/mips/sibyte/sb1250/irq.c @@ -50,7 +50,7 @@ static void enable_sb1250_irq(unsigned int irq); static void disable_sb1250_irq(unsigned int irq); static void ack_sb1250_irq(unsigned int irq); #ifdef CONFIG_SMP -static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask); +static int sb1250_set_affinity(unsigned int irq, const struct cpumask *mask); #endif #ifdef CONFIG_SIBYTE_HAS_LDT @@ -103,7 +103,7 @@ void sb1250_unmask_irq(int cpu, int irq) } #ifdef CONFIG_SMP -static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask) +static int sb1250_set_affinity(unsigned int irq, const struct cpumask *mask) { int i = 0, old_cpu, cpu, int_on; u64 cur_ints; @@ -114,7 +114,7 @@ static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask) if (cpumask_weight(mask) > 1) { printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq); - return; + return -1; } /* Convert logical CPU to physical CPU */ @@ -146,6 +146,8 @@ static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask) } spin_unlock(&sb1250_imr_lock); spin_unlock_irqrestore(&desc->lock, flags); + + return 0; } #endif diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c index 4ea4229d765..8007f1e6572 100644 --- a/arch/parisc/kernel/irq.c +++ b/arch/parisc/kernel/irq.c @@ -130,15 +130,17 @@ int cpu_check_affinity(unsigned int irq, const struct cpumask *dest) return cpu_dest; } -static void cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest) +static int cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest) { int cpu_dest; cpu_dest = cpu_check_affinity(irq, dest); if (cpu_dest < 0) - return; + return -1; cpumask_copy(&irq_desc[irq].affinity, dest); + + return 0; } #endif diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index 80b513449f4..be3581a8c29 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -333,7 +333,7 @@ static void xics_eoi_lpar(unsigned int virq) lpar_xirr_info_set((0xff << 24) | irq); } -static void xics_set_affinity(unsigned int virq, const struct cpumask *cpumask) +static int xics_set_affinity(unsigned int virq, const struct cpumask *cpumask) { unsigned int irq; int status; @@ -342,14 +342,14 @@ static void xics_set_affinity(unsigned int virq, const struct cpumask *cpumask) irq = (unsigned int)irq_map[virq].hwirq; if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS) - return; + return -1; status = rtas_call(ibm_get_xive, 1, 3, xics_status, irq); if (status) { printk(KERN_ERR "%s: ibm,get-xive irq=%u returns %d\n", __func__, irq, status); - return; + return -1; } /* @@ -363,7 +363,7 @@ static void xics_set_affinity(unsigned int virq, const struct cpumask *cpumask) printk(KERN_WARNING "%s: No online cpus in the mask %s for irq %d\n", __func__, cpulist, virq); - return; + return -1; } status = rtas_call(ibm_set_xive, 3, 1, NULL, @@ -372,8 +372,10 @@ static void xics_set_affinity(unsigned int virq, const struct cpumask *cpumask) if (status) { printk(KERN_ERR "%s: ibm,set-xive irq=%u returns %d\n", __func__, irq, status); - return; + return -1; } + + return 0; } static struct irq_chip xics_pic_direct = { diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 21b95670159..f4cbd15cf22 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -807,7 +807,7 @@ static void mpic_end_ipi(unsigned int irq) #endif /* CONFIG_SMP */ -void mpic_set_affinity(unsigned int irq, const struct cpumask *cpumask) +int mpic_set_affinity(unsigned int irq, const struct cpumask *cpumask) { struct mpic *mpic = mpic_from_irq(irq); unsigned int src = mpic_irq_to_hw(irq); @@ -824,6 +824,8 @@ void mpic_set_affinity(unsigned int irq, const struct cpumask *cpumask) mpic_irq_write(src, MPIC_INFO(IRQ_DESTINATION), mpic_physmask(cpus_addr(tmp)[0])); } + + return 0; } static unsigned int mpic_type_to_vecpri(struct mpic *mpic, unsigned int type) diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c index 5deabe921a4..e5e78f9cfc9 100644 --- a/arch/sparc/kernel/irq_64.c +++ b/arch/sparc/kernel/irq_64.c @@ -318,10 +318,12 @@ static void sun4u_irq_enable(unsigned int virt_irq) } } -static void sun4u_set_affinity(unsigned int virt_irq, +static int sun4u_set_affinity(unsigned int virt_irq, const struct cpumask *mask) { sun4u_irq_enable(virt_irq); + + return 0; } /* Don't do anything. The desc->status check for IRQ_DISABLED in @@ -377,7 +379,7 @@ static void sun4v_irq_enable(unsigned int virt_irq) ino, err); } -static void sun4v_set_affinity(unsigned int virt_irq, +static int sun4v_set_affinity(unsigned int virt_irq, const struct cpumask *mask) { unsigned int ino = virt_irq_table[virt_irq].dev_ino; @@ -388,6 +390,8 @@ static void sun4v_set_affinity(unsigned int virt_irq, if (err != HV_EOK) printk(KERN_ERR "sun4v_intr_settarget(%x,%lu): " "err(%d)\n", ino, cpuid, err); + + return 0; } static void sun4v_irq_disable(unsigned int virt_irq) @@ -445,7 +449,7 @@ static void sun4v_virq_enable(unsigned int virt_irq) dev_handle, dev_ino, err); } -static void sun4v_virt_set_affinity(unsigned int virt_irq, +static int sun4v_virt_set_affinity(unsigned int virt_irq, const struct cpumask *mask) { unsigned long cpuid, dev_handle, dev_ino; @@ -461,6 +465,8 @@ static void sun4v_virt_set_affinity(unsigned int virt_irq, printk(KERN_ERR "sun4v_vintr_set_target(%lx,%lx,%lu): " "err(%d)\n", dev_handle, dev_ino, cpuid, err); + + return 0; } static void sun4v_virq_disable(unsigned int virt_irq) diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 9fbf0f7ec7e..5c7630b40a5 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -574,13 +574,14 @@ set_desc_affinity(struct irq_desc *desc, const struct cpumask *mask) return apic->cpu_mask_to_apicid_and(desc->affinity, cfg->domain); } -static void +static int set_ioapic_affinity_irq_desc(struct irq_desc *desc, const struct cpumask *mask) { struct irq_cfg *cfg; unsigned long flags; unsigned int dest; unsigned int irq; + int ret = -1; irq = desc->irq; cfg = desc->chip_data; @@ -591,18 +592,21 @@ set_ioapic_affinity_irq_desc(struct irq_desc *desc, const struct cpumask *mask) /* Only the high 8 bits are valid. */ dest = SET_APIC_LOGICAL_ID(dest); __target_IO_APIC_irq(irq, dest, cfg); + ret = 0; } spin_unlock_irqrestore(&ioapic_lock, flags); + + return ret; } -static void +static int set_ioapic_affinity_irq(unsigned int irq, const struct cpumask *mask) { struct irq_desc *desc; desc = irq_to_desc(irq); - set_ioapic_affinity_irq_desc(desc, mask); + return set_ioapic_affinity_irq_desc(desc, mask); } #endif /* CONFIG_SMP */ @@ -2348,24 +2352,25 @@ static int ioapic_retrigger_irq(unsigned int irq) * Real vector that is used for interrupting cpu will be coming from * the interrupt-remapping table entry. */ -static void +static int migrate_ioapic_irq_desc(struct irq_desc *desc, const struct cpumask *mask) { struct irq_cfg *cfg; struct irte irte; unsigned int dest; unsigned int irq; + int ret = -1; if (!cpumask_intersects(mask, cpu_online_mask)) - return; + return ret; irq = desc->irq; if (get_irte(irq, &irte)) - return; + return ret; cfg = desc->chip_data; if (assign_irq_vector(irq, cfg, mask)) - return; + return ret; dest = apic->cpu_mask_to_apicid_and(cfg->domain, mask); @@ -2381,27 +2386,30 @@ migrate_ioapic_irq_desc(struct irq_desc *desc, const struct cpumask *mask) send_cleanup_vector(cfg); cpumask_copy(desc->affinity, mask); + + return 0; } /* * Migrates the IRQ destination in the process context. */ -static void set_ir_ioapic_affinity_irq_desc(struct irq_desc *desc, +static int set_ir_ioapic_affinity_irq_desc(struct irq_desc *desc, const struct cpumask *mask) { - migrate_ioapic_irq_desc(desc, mask); + return migrate_ioapic_irq_desc(desc, mask); } -static void set_ir_ioapic_affinity_irq(unsigned int irq, +static int set_ir_ioapic_affinity_irq(unsigned int irq, const struct cpumask *mask) { struct irq_desc *desc = irq_to_desc(irq); - set_ir_ioapic_affinity_irq_desc(desc, mask); + return set_ir_ioapic_affinity_irq_desc(desc, mask); } #else -static inline void set_ir_ioapic_affinity_irq_desc(struct irq_desc *desc, +static inline int set_ir_ioapic_affinity_irq_desc(struct irq_desc *desc, const struct cpumask *mask) { + return 0; } #endif @@ -3318,7 +3326,7 @@ static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_ms } #ifdef CONFIG_SMP -static void set_msi_irq_affinity(unsigned int irq, const struct cpumask *mask) +static int set_msi_irq_affinity(unsigned int irq, const struct cpumask *mask) { struct irq_desc *desc = irq_to_desc(irq); struct irq_cfg *cfg; @@ -3327,7 +3335,7 @@ static void set_msi_irq_affinity(unsigned int irq, const struct cpumask *mask) dest = set_desc_affinity(desc, mask); if (dest == BAD_APICID) - return; + return -1; cfg = desc->chip_data; @@ -3339,13 +3347,15 @@ static void set_msi_irq_affinity(unsigned int irq, const struct cpumask *mask) msg.address_lo |= MSI_ADDR_DEST_ID(dest); write_msi_msg_desc(desc, &msg); + + return 0; } #ifdef CONFIG_INTR_REMAP /* * Migrate the MSI irq to another cpumask. This migration is * done in the process context using interrupt-remapping hardware. */ -static void +static int ir_set_msi_irq_affinity(unsigned int irq, const struct cpumask *mask) { struct irq_desc *desc = irq_to_desc(irq); @@ -3354,11 +3364,11 @@ ir_set_msi_irq_affinity(unsigned int irq, const struct cpumask *mask) struct irte irte; if (get_irte(irq, &irte)) - return; + return -1; dest = set_desc_affinity(desc, mask); if (dest == BAD_APICID) - return; + return -1; irte.vector = cfg->vector; irte.dest_id = IRTE_DEST(dest); @@ -3375,6 +3385,8 @@ ir_set_msi_irq_affinity(unsigned int irq, const struct cpumask *mask) */ if (cfg->move_in_progress) send_cleanup_vector(cfg); + + return 0; } #endif @@ -3528,7 +3540,7 @@ void arch_teardown_msi_irq(unsigned int irq) #if defined (CONFIG_DMAR) || defined (CONFIG_INTR_REMAP) #ifdef CONFIG_SMP -static void dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask) +static int dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask) { struct irq_desc *desc = irq_to_desc(irq); struct irq_cfg *cfg; @@ -3537,7 +3549,7 @@ static void dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask) dest = set_desc_affinity(desc, mask); if (dest == BAD_APICID) - return; + return -1; cfg = desc->chip_data; @@ -3549,6 +3561,8 @@ static void dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask) msg.address_lo |= MSI_ADDR_DEST_ID(dest); dmar_msi_write(irq, &msg); + + return 0; } #endif /* CONFIG_SMP */ @@ -3582,7 +3596,7 @@ int arch_setup_dmar_msi(unsigned int irq) #ifdef CONFIG_HPET_TIMER #ifdef CONFIG_SMP -static void hpet_msi_set_affinity(unsigned int irq, const struct cpumask *mask) +static int hpet_msi_set_affinity(unsigned int irq, const struct cpumask *mask) { struct irq_desc *desc = irq_to_desc(irq); struct irq_cfg *cfg; @@ -3591,7 +3605,7 @@ static void hpet_msi_set_affinity(unsigned int irq, const struct cpumask *mask) dest = set_desc_affinity(desc, mask); if (dest == BAD_APICID) - return; + return -1; cfg = desc->chip_data; @@ -3603,6 +3617,8 @@ static void hpet_msi_set_affinity(unsigned int irq, const struct cpumask *mask) msg.address_lo |= MSI_ADDR_DEST_ID(dest); hpet_msi_write(irq, &msg); + + return 0; } #endif /* CONFIG_SMP */ @@ -3659,7 +3675,7 @@ static void target_ht_irq(unsigned int irq, unsigned int dest, u8 vector) write_ht_irq_msg(irq, &msg); } -static void set_ht_irq_affinity(unsigned int irq, const struct cpumask *mask) +static int set_ht_irq_affinity(unsigned int irq, const struct cpumask *mask) { struct irq_desc *desc = irq_to_desc(irq); struct irq_cfg *cfg; @@ -3667,11 +3683,13 @@ static void set_ht_irq_affinity(unsigned int irq, const struct cpumask *mask) dest = set_desc_affinity(desc, mask); if (dest == BAD_APICID) - return; + return -1; cfg = desc->chip_data; target_ht_irq(irq, dest, cfg->vector); + + return 0; } #endif -- cgit v1.2.3 From 85ac16d033370caf6f48d743c8dc8103700f5cc5 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 27 Apr 2009 18:00:38 -0700 Subject: x86/irq: change irq_desc_alloc() to take node instead of cpu This simplifies the node awareness of the code. All our allocators only deal with a NUMA node ID locality not with CPU ids anyway - so there's no need to maintain (and transform) a CPU id all across the IRq layer. v2: keep move_irq_desc related [ Impact: cleanup, prepare IRQ code to be NUMA-aware ] Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: Suresh Siddha Cc: "Eric W. Biederman" Cc: Rusty Russell Cc: Jeremy Fitzhardinge LKML-Reference: <49F65536.2020300@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/io_apic.c | 58 +++++++++++++++++++----------------------- arch/x86/lguest/boot.c | 2 +- 2 files changed, 27 insertions(+), 33 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 5c7630b40a5..560b887ba27 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -129,12 +129,9 @@ struct irq_pin_list { struct irq_pin_list *next; }; -static struct irq_pin_list *get_one_free_irq_2_pin(int cpu) +static struct irq_pin_list *get_one_free_irq_2_pin(int node) { struct irq_pin_list *pin; - int node; - - node = cpu_to_node(cpu); pin = kzalloc_node(sizeof(*pin), GFP_ATOMIC, node); @@ -209,12 +206,9 @@ static struct irq_cfg *irq_cfg(unsigned int irq) return cfg; } -static struct irq_cfg *get_one_free_irq_cfg(int cpu) +static struct irq_cfg *get_one_free_irq_cfg(int node) { struct irq_cfg *cfg; - int node; - - node = cpu_to_node(cpu); cfg = kzalloc_node(sizeof(*cfg), GFP_ATOMIC, node); if (cfg) { @@ -235,13 +229,13 @@ static struct irq_cfg *get_one_free_irq_cfg(int cpu) return cfg; } -int arch_init_chip_data(struct irq_desc *desc, int cpu) +int arch_init_chip_data(struct irq_desc *desc, int node) { struct irq_cfg *cfg; cfg = desc->chip_data; if (!cfg) { - desc->chip_data = get_one_free_irq_cfg(cpu); + desc->chip_data = get_one_free_irq_cfg(node); if (!desc->chip_data) { printk(KERN_ERR "can not alloc irq_cfg\n"); BUG_ON(1); @@ -253,7 +247,7 @@ int arch_init_chip_data(struct irq_desc *desc, int cpu) /* for move_irq_desc */ static void -init_copy_irq_2_pin(struct irq_cfg *old_cfg, struct irq_cfg *cfg, int cpu) +init_copy_irq_2_pin(struct irq_cfg *old_cfg, struct irq_cfg *cfg, int node) { struct irq_pin_list *old_entry, *head, *tail, *entry; @@ -262,7 +256,7 @@ init_copy_irq_2_pin(struct irq_cfg *old_cfg, struct irq_cfg *cfg, int cpu) if (!old_entry) return; - entry = get_one_free_irq_2_pin(cpu); + entry = get_one_free_irq_2_pin(node); if (!entry) return; @@ -272,7 +266,7 @@ init_copy_irq_2_pin(struct irq_cfg *old_cfg, struct irq_cfg *cfg, int cpu) tail = entry; old_entry = old_entry->next; while (old_entry) { - entry = get_one_free_irq_2_pin(cpu); + entry = get_one_free_irq_2_pin(node); if (!entry) { entry = head; while (entry) { @@ -312,12 +306,12 @@ static void free_irq_2_pin(struct irq_cfg *old_cfg, struct irq_cfg *cfg) } void arch_init_copy_chip_data(struct irq_desc *old_desc, - struct irq_desc *desc, int cpu) + struct irq_desc *desc, int node) { struct irq_cfg *cfg; struct irq_cfg *old_cfg; - cfg = get_one_free_irq_cfg(cpu); + cfg = get_one_free_irq_cfg(node); if (!cfg) return; @@ -328,7 +322,7 @@ void arch_init_copy_chip_data(struct irq_desc *old_desc, memcpy(cfg, old_cfg, sizeof(struct irq_cfg)); - init_copy_irq_2_pin(old_cfg, cfg, cpu); + init_copy_irq_2_pin(old_cfg, cfg, node); } static void free_irq_cfg(struct irq_cfg *old_cfg) @@ -615,13 +609,13 @@ set_ioapic_affinity_irq(unsigned int irq, const struct cpumask *mask) * shared ISA-space IRQs, so we have to support them. We are super * fast in the common case, and fast for shared ISA-space IRQs. */ -static void add_pin_to_irq_cpu(struct irq_cfg *cfg, int cpu, int apic, int pin) +static void add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin) { struct irq_pin_list *entry; entry = cfg->irq_2_pin; if (!entry) { - entry = get_one_free_irq_2_pin(cpu); + entry = get_one_free_irq_2_pin(node); if (!entry) { printk(KERN_ERR "can not alloc irq_2_pin to add %d - %d\n", apic, pin); @@ -641,7 +635,7 @@ static void add_pin_to_irq_cpu(struct irq_cfg *cfg, int cpu, int apic, int pin) entry = entry->next; } - entry->next = get_one_free_irq_2_pin(cpu); + entry->next = get_one_free_irq_2_pin(node); entry = entry->next; entry->apic = apic; entry->pin = pin; @@ -650,7 +644,7 @@ static void add_pin_to_irq_cpu(struct irq_cfg *cfg, int cpu, int apic, int pin) /* * Reroute an IRQ to a different pin. */ -static void __init replace_pin_at_irq_cpu(struct irq_cfg *cfg, int cpu, +static void __init replace_pin_at_irq_node(struct irq_cfg *cfg, int node, int oldapic, int oldpin, int newapic, int newpin) { @@ -670,7 +664,7 @@ static void __init replace_pin_at_irq_cpu(struct irq_cfg *cfg, int cpu, /* why? call replace before add? */ if (!replaced) - add_pin_to_irq_cpu(cfg, cpu, newapic, newpin); + add_pin_to_irq_node(cfg, node, newapic, newpin); } static inline void io_apic_modify_irq(struct irq_cfg *cfg, @@ -1612,7 +1606,7 @@ static void __init setup_IO_APIC_irqs(void) int notcon = 0; struct irq_desc *desc; struct irq_cfg *cfg; - int cpu = boot_cpu_id; + int node = cpu_to_node(boot_cpu_id); apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n"); @@ -1647,13 +1641,13 @@ static void __init setup_IO_APIC_irqs(void) apic->multi_timer_check(apic_id, irq)) continue; - desc = irq_to_desc_alloc_cpu(irq, cpu); + desc = irq_to_desc_alloc_node(irq, node); if (!desc) { printk(KERN_INFO "can not get irq_desc for %d\n", irq); continue; } cfg = desc->chip_data; - add_pin_to_irq_cpu(cfg, cpu, apic_id, pin); + add_pin_to_irq_node(cfg, node, apic_id, pin); setup_IO_APIC_irq(apic_id, pin, irq, desc, irq_trigger(idx), irq_polarity(idx)); @@ -2863,7 +2857,7 @@ static inline void __init check_timer(void) { struct irq_desc *desc = irq_to_desc(0); struct irq_cfg *cfg = desc->chip_data; - int cpu = boot_cpu_id; + int node = cpu_to_node(boot_cpu_id); int apic1, pin1, apic2, pin2; unsigned long flags; int no_pin1 = 0; @@ -2929,7 +2923,7 @@ static inline void __init check_timer(void) * Ok, does IRQ0 through the IOAPIC work? */ if (no_pin1) { - add_pin_to_irq_cpu(cfg, cpu, apic1, pin1); + add_pin_to_irq_node(cfg, node, apic1, pin1); setup_timer_IRQ0_pin(apic1, pin1, cfg->vector); } else { /* for edge trigger, setup_IO_APIC_irq already @@ -2966,7 +2960,7 @@ static inline void __init check_timer(void) /* * legacy devices should be connected to IO APIC #0 */ - replace_pin_at_irq_cpu(cfg, cpu, apic1, pin1, apic2, pin2); + replace_pin_at_irq_node(cfg, node, apic1, pin1, apic2, pin2); setup_timer_IRQ0_pin(apic2, pin2, cfg->vector); enable_8259A_irq(0); if (timer_irq_works()) { @@ -3185,7 +3179,7 @@ unsigned int create_irq_nr(unsigned int irq_want) unsigned int new; unsigned long flags; struct irq_cfg *cfg_new = NULL; - int cpu = boot_cpu_id; + int node = cpu_to_node(boot_cpu_id); struct irq_desc *desc_new = NULL; irq = 0; @@ -3194,7 +3188,7 @@ unsigned int create_irq_nr(unsigned int irq_want) spin_lock_irqsave(&vector_lock, flags); for (new = irq_want; new < nr_irqs; new++) { - desc_new = irq_to_desc_alloc_cpu(new, cpu); + desc_new = irq_to_desc_alloc_node(new, node); if (!desc_new) { printk(KERN_INFO "can not get irq_desc for %d\n", new); continue; @@ -3968,7 +3962,7 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int p { struct irq_desc *desc; struct irq_cfg *cfg; - int cpu = boot_cpu_id; + int node = cpu_to_node(boot_cpu_id); if (!IO_APIC_IRQ(irq)) { apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n", @@ -3976,7 +3970,7 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int p return -EINVAL; } - desc = irq_to_desc_alloc_cpu(irq, cpu); + desc = irq_to_desc_alloc_node(irq, node); if (!desc) { printk(KERN_INFO "can not get irq_desc %d\n", irq); return 0; @@ -3987,7 +3981,7 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int p */ if (irq >= NR_IRQS_LEGACY) { cfg = desc->chip_data; - add_pin_to_irq_cpu(cfg, cpu, ioapic, pin); + add_pin_to_irq_node(cfg, node, ioapic, pin); } setup_IO_APIC_irq(ioapic, pin, irq, desc, triggering, polarity); diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index ca7ec44bafc..45acbcf2568 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -636,7 +636,7 @@ static void __init lguest_init_IRQ(void) void lguest_setup_irq(unsigned int irq) { - irq_to_desc_alloc_cpu(irq, 0); + irq_to_desc_alloc_node(irq, 0); set_irq_chip_and_handler_name(irq, &lguest_irq_controller, handle_level_irq, "level"); } -- cgit v1.2.3 From a2f809b08ae4dddc1015c7dcd8659e5729e45b3e Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 27 Apr 2009 18:01:20 -0700 Subject: irq: change ACPI GSI APIs to also take a device argument We want to use dev_to_node() later on, to be aware of the 'home node' of the GSI in question. [ Impact: cleanup, prepare the IRQ code to be more NUMA aware ] Signed-off-by: Yinghai Lu Acked-by: Len Brown Cc: Andrew Morton Cc: Suresh Siddha Cc: "Eric W. Biederman" Cc: Rusty Russell Cc: Len Brown Cc: Bjorn Helgaas Cc: Tony Luck Cc: linux-acpi@vger.kernel.org Cc: linux-ia64@vger.kernel.org LKML-Reference: <49F65560.20904@kernel.org> Signed-off-by: Ingo Molnar --- arch/ia64/kernel/acpi.c | 5 +++-- arch/x86/include/asm/io_apic.h | 4 ++-- arch/x86/include/asm/mpspec.h | 4 +++- arch/x86/kernel/acpi/boot.c | 8 ++++---- arch/x86/kernel/apic/io_apic.c | 3 ++- 5 files changed, 14 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 5510317db37..baec6f00f7f 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -636,7 +636,7 @@ void __init acpi_numa_arch_fixup(void) * success: return IRQ number (>=0) * failure: return < 0 */ -int acpi_register_gsi(u32 gsi, int triggering, int polarity) +int acpi_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity) { if (acpi_irq_model == ACPI_IRQ_MODEL_PLATFORM) return gsi; @@ -678,7 +678,8 @@ static int __init acpi_parse_fadt(struct acpi_table_header *table) fadt = (struct acpi_table_fadt *)fadt_header; - acpi_register_gsi(fadt->sci_interrupt, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW); + acpi_register_gsi(NULL, fadt->sci_interrupt, ACPI_LEVEL_SENSITIVE, + ACPI_ACTIVE_LOW); return 0; } diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h index 9d826e43601..07f2913ba5d 100644 --- a/arch/x86/include/asm/io_apic.h +++ b/arch/x86/include/asm/io_apic.h @@ -154,8 +154,8 @@ extern int timer_through_8259; extern int io_apic_get_unique_id(int ioapic, int apic_id); extern int io_apic_get_version(int ioapic); extern int io_apic_get_redir_entries(int ioapic); -extern int io_apic_set_pci_routing(int ioapic, int pin, int irq, - int edge_level, int active_high_low); +extern int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, + int irq, int edge_level, int active_high_low); #endif /* CONFIG_ACPI */ extern int (*ioapic_renumber_irq)(int ioapic, int irq); diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h index 642fc7fc8cd..3ea1f531f53 100644 --- a/arch/x86/include/asm/mpspec.h +++ b/arch/x86/include/asm/mpspec.h @@ -72,7 +72,9 @@ extern void mp_register_ioapic(int id, u32 address, u32 gsi_base); extern void mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi); extern void mp_config_acpi_legacy_irqs(void); -extern int mp_register_gsi(u32 gsi, int edge_level, int active_high_low); +struct device; +extern int mp_register_gsi(struct device *dev, u32 gsi, int edge_level, + int active_high_low); extern int acpi_probe_gsi(void); #ifdef CONFIG_X86_IO_APIC extern int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin, diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 723989d7f80..6ee96b5530f 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -522,7 +522,7 @@ int acpi_gsi_to_irq(u32 gsi, unsigned int *irq) * success: return IRQ number (>=0) * failure: return < 0 */ -int acpi_register_gsi(u32 gsi, int triggering, int polarity) +int acpi_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity) { unsigned int irq; unsigned int plat_gsi = gsi; @@ -539,7 +539,7 @@ int acpi_register_gsi(u32 gsi, int triggering, int polarity) #ifdef CONFIG_X86_IO_APIC if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) { - plat_gsi = mp_register_gsi(gsi, triggering, polarity); + plat_gsi = mp_register_gsi(dev, gsi, triggering, polarity); } #endif acpi_gsi_to_irq(plat_gsi, &irq); @@ -1158,7 +1158,7 @@ void __init mp_config_acpi_legacy_irqs(void) } } -int mp_register_gsi(u32 gsi, int triggering, int polarity) +int mp_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity) { int ioapic; int ioapic_pin; @@ -1253,7 +1253,7 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity) } } #endif - io_apic_set_pci_routing(ioapic, ioapic_pin, gsi, + io_apic_set_pci_routing(dev, ioapic, ioapic_pin, gsi, triggering == ACPI_EDGE_SENSITIVE ? 0 : 1, polarity == ACPI_ACTIVE_HIGH ? 0 : 1); return gsi; diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 560b887ba27..d9346622601 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -3958,7 +3958,8 @@ int __init io_apic_get_version(int ioapic) } #endif -int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int polarity) +int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq, + int triggering, int polarity) { struct irq_desc *desc; struct irq_cfg *cfg; -- cgit v1.2.3 From 024154cfdd802654cb236a18c78b6e37351e2c49 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 27 Apr 2009 18:01:50 -0700 Subject: irq: change io_apic_set_pci_routing() to use device parameter Make actual use of the device parameter passed down to io_apic_set_pci_routing() - to have the IRQ descriptor on the home node of the device. If no device has been passed down, we assume it's a platform device and use the boot node ID for the IRQ descriptor. [ Impact: optimization, make IO-APIC code more NUMA aware ] Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: Suresh Siddha Cc: "Eric W. Biederman" Cc: Rusty Russell LKML-Reference: <49F6557E.3080101@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/io_apic.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index d9346622601..82376e021b5 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -3963,7 +3963,7 @@ int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq, { struct irq_desc *desc; struct irq_cfg *cfg; - int node = cpu_to_node(boot_cpu_id); + int node; if (!IO_APIC_IRQ(irq)) { apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n", @@ -3971,6 +3971,11 @@ int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq, return -EINVAL; } + if (dev) + node = dev_to_node(dev); + else + node = cpu_to_node(boot_cpu_id); + desc = irq_to_desc_alloc_node(irq, node); if (!desc) { printk(KERN_INFO "can not get irq_desc %d\n", irq); -- cgit v1.2.3 From d047f53a2ecce37e3bdf79eac5a326fbaadb3628 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 27 Apr 2009 18:02:23 -0700 Subject: x86/irq: change MSI irq_desc to be more numa aware Try to get irq_desc on the home node in create_irq_nr(). v2: don't check if we can move it when sparse_irq is not used v3: use move_irq_des, if that node is not what we want [ Impact: optimization, make MSI IRQ descriptors more NUMA aware ] Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: Suresh Siddha Cc: "Eric W. Biederman" Cc: Rusty Russell LKML-Reference: <49F6559F.7070005@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/io_apic.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 82376e021b5..9cd4806cdf5 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -3172,14 +3172,13 @@ static int nr_irqs_gsi = NR_IRQS_LEGACY; /* * Dynamic irq allocate and deallocation */ -unsigned int create_irq_nr(unsigned int irq_want) +unsigned int create_irq_nr(unsigned int irq_want, int node) { /* Allocate an unused irq */ unsigned int irq; unsigned int new; unsigned long flags; struct irq_cfg *cfg_new = NULL; - int node = cpu_to_node(boot_cpu_id); struct irq_desc *desc_new = NULL; irq = 0; @@ -3197,6 +3196,13 @@ unsigned int create_irq_nr(unsigned int irq_want) if (cfg_new->vector != 0) continue; + +#ifdef CONFIG_NUMA_IRQ_DESC + /* different node ?*/ + if (desc_new->node != node) + desc = move_irq_desc(desc, node); +#endif + if (__assign_irq_vector(new, cfg_new, apic->target_cpus()) == 0) irq = new; break; @@ -3214,11 +3220,12 @@ unsigned int create_irq_nr(unsigned int irq_want) int create_irq(void) { + int node = cpu_to_node(boot_cpu_id); unsigned int irq_want; int irq; irq_want = nr_irqs_gsi; - irq = create_irq_nr(irq_want); + irq = create_irq_nr(irq_want, node); if (irq == 0) irq = -1; @@ -3476,15 +3483,17 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) unsigned int irq_want; struct intel_iommu *iommu = NULL; int index = 0; + int node; /* x86 doesn't support multiple MSI yet */ if (type == PCI_CAP_ID_MSI && nvec > 1) return 1; + node = dev_to_node(&dev->dev); irq_want = nr_irqs_gsi; sub_handle = 0; list_for_each_entry(msidesc, &dev->msi_list, list) { - irq = create_irq_nr(irq_want); + irq = create_irq_nr(irq_want, node); if (irq == 0) return -1; irq_want = irq + 1; -- cgit v1.2.3 From 15e957d08dd4a841359cfec59ecb74041e0097aa Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 30 Apr 2009 01:17:50 -0700 Subject: x86/irq: use move_irq_desc() in create_irq_nr() move_irq_desc() will try to move irq_desc to the home node if the allocated one is not correct, in create_irq_nr(). ( This can happen on devices that are on different nodes that are using MSI, when drivers are loaded and unloaded randomly. ) v2: fix non-smp build v3: add NUMA_IRQ_DESC to eliminate #ifdefs [ Impact: improve irq descriptor locality on NUMA systems ] Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: Suresh Siddha Cc: "Eric W. Biederman" Cc: Rusty Russell LKML-Reference: <49F95EAE.2050903@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 4 ++++ arch/x86/kernel/apic/io_apic.c | 6 +----- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index e1b2543f8ed..674e21e9f0a 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -274,6 +274,10 @@ config SPARSE_IRQ If you don't know what to do here, say N. +config NUMA_IRQ_DESC + def_bool y + depends on SPARSE_IRQ && NUMA + config X86_MPPARSE bool "Enable MPS table" if ACPI default y diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 9cd4806cdf5..e583291fe6c 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -3197,11 +3197,7 @@ unsigned int create_irq_nr(unsigned int irq_want, int node) if (cfg_new->vector != 0) continue; -#ifdef CONFIG_NUMA_IRQ_DESC - /* different node ?*/ - if (desc_new->node != node) - desc = move_irq_desc(desc, node); -#endif + desc_new = move_irq_desc(desc_new, node); if (__assign_irq_vector(new, cfg_new, apic->target_cpus()) == 0) irq = new; -- cgit v1.2.3 From 6f0aced639d346e5f54eea9fcb2784b633493d09 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Fri, 1 May 2009 23:54:25 +0400 Subject: x86, apic: use pr_ macro Replace recenly appeared printk with pr_ macro (the file already use a lot of them). [ Impact: cleanup ] Signed-off-by: Cyrill Gorcunov LKML-Reference: <20090501195425.GB4633@lenovo> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/apic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 28f747d61d7..e258bedce7c 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -2191,7 +2191,7 @@ static int __cpuinit set_multi(const struct dmi_system_id *d) { if (multi) return 0; - printk(KERN_INFO "APIC: %s detected, Multi Chassis\n", d->ident); + pr_info("APIC: %s detected, Multi Chassis\n", d->ident); multi = 1; return 0; } -- cgit v1.2.3 From 1cbac972ba28e706fa9ce4d4c81830040bc811ee Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 2 May 2009 13:39:56 +0400 Subject: x86: uv io-apic - use BUILD_BUG_ON instead of BUG_ON The expression is known to be true/false at compilation time so we're allowed to use build-time instead of run-time check. Also align 'entry' items assignment. [ Impact: shrink kernel a bit, cleanup ] Signed-off-by: Cyrill Gorcunov Cc: Jack Steiner LKML-Reference: <20090502093956.GB4791@lenovo> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/io_apic.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 8aef5f9d947..a80335ba12c 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -3749,6 +3749,8 @@ int arch_enable_uv_irq(char *irq_name, unsigned int irq, int cpu, int mmr_blade, unsigned long flags; int err; + BUILD_BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long)); + cfg = irq_cfg(irq); err = assign_irq_vector(irq, cfg, eligible_cpu); @@ -3762,15 +3764,13 @@ int arch_enable_uv_irq(char *irq_name, unsigned int irq, int cpu, int mmr_blade, mmr_value = 0; entry = (struct uv_IO_APIC_route_entry *)&mmr_value; - BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long)); - - entry->vector = cfg->vector; - entry->delivery_mode = apic->irq_delivery_mode; - entry->dest_mode = apic->irq_dest_mode; - entry->polarity = 0; - entry->trigger = 0; - entry->mask = 0; - entry->dest = apic->cpu_mask_to_apicid(eligible_cpu); + entry->vector = cfg->vector; + entry->delivery_mode = apic->irq_delivery_mode; + entry->dest_mode = apic->irq_dest_mode; + entry->polarity = 0; + entry->trigger = 0; + entry->mask = 0; + entry->dest = apic->cpu_mask_to_apicid(eligible_cpu); mmr_pnode = uv_blade_to_pnode(mmr_blade); uv_write_global_mmr64(mmr_pnode, mmr_offset, mmr_value); @@ -3788,10 +3788,10 @@ void arch_disable_uv_irq(int mmr_blade, unsigned long mmr_offset) struct uv_IO_APIC_route_entry *entry; int mmr_pnode; + BUILD_BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long)); + mmr_value = 0; entry = (struct uv_IO_APIC_route_entry *)&mmr_value; - BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long)); - entry->mask = 1; mmr_pnode = uv_blade_to_pnode(mmr_blade); -- cgit v1.2.3 From 3969c52d4d2fef5a4b9e3ab0e51b3901e1cc8b83 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Sun, 3 May 2009 11:11:35 +0530 Subject: x86: cpufeature.h fix name for X86_FEATURE_MCE X86_FEATURE_MCE = Machine Check Exception X86_FEATURE_MCA = Machine Check Architecture [ Impact: cleanup ] Signed-off-by: Jaswinder Singh Rajput LKML-Reference: <1241329295.6321.1.camel@localhost.localdomain> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/cpufeature.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h index bb83b1c397a..ccc1061b8b2 100644 --- a/arch/x86/include/asm/cpufeature.h +++ b/arch/x86/include/asm/cpufeature.h @@ -22,7 +22,7 @@ #define X86_FEATURE_TSC (0*32+ 4) /* Time Stamp Counter */ #define X86_FEATURE_MSR (0*32+ 5) /* Model-Specific Registers */ #define X86_FEATURE_PAE (0*32+ 6) /* Physical Address Extensions */ -#define X86_FEATURE_MCE (0*32+ 7) /* Machine Check Architecture */ +#define X86_FEATURE_MCE (0*32+ 7) /* Machine Check Exception */ #define X86_FEATURE_CX8 (0*32+ 8) /* CMPXCHG8 instruction */ #define X86_FEATURE_APIC (0*32+ 9) /* Onboard APIC */ #define X86_FEATURE_SEP (0*32+11) /* SYSENTER/SYSEXIT */ -- cgit v1.2.3 From 9a8709d44139748fe2e0ab56d20d8c384c8b65ad Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 2 May 2009 00:25:11 +0400 Subject: x86: uv - prevent NULL dereference in uv_system_init() We may reach NULL dereference oops if kmalloc failed. Prevent it with explicit BUG_ON. [ Impact: more controlled assert in 'impossible' scenario ] Signed-off-by: Cyrill Gorcunov Acked-by: Jack Steiner LKML-Reference: <20090501202511.GE4633@lenovo> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/x2apic_uv_x.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index 873bf7121e8..9d9e2281a82 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -569,15 +569,18 @@ void __init uv_system_init(void) bytes = sizeof(struct uv_blade_info) * uv_num_possible_blades(); uv_blade_info = kmalloc(bytes, GFP_KERNEL); + BUG_ON(!uv_blade_info); get_lowmem_redirect(&lowmem_redir_base, &lowmem_redir_size); bytes = sizeof(uv_node_to_blade[0]) * num_possible_nodes(); uv_node_to_blade = kmalloc(bytes, GFP_KERNEL); + BUG_ON(!uv_node_to_blade); memset(uv_node_to_blade, 255, bytes); bytes = sizeof(uv_cpu_to_blade[0]) * num_possible_cpus(); uv_cpu_to_blade = kmalloc(bytes, GFP_KERNEL); + BUG_ON(!uv_cpu_to_blade); memset(uv_cpu_to_blade, 255, bytes); blade = 0; -- cgit v1.2.3 From b2e5d8588de0b5341eddad87dbe48d2185eaa3dd Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 6 May 2009 07:55:33 +0200 Subject: irq: change ->set_affinity() to return status, fix This build failure: arch/powerpc/sysdev/mpic.c:810: error: conflicting types for 'mpic_set_affinity' arch/powerpc/sysdev/mpic.h:39: error: previous declaration of 'mpic_set_affinity' was here make[2]: *** [arch/powerpc/sysdev/mpic.o] Error 1 make[2]: *** Waiting for unfinished jobs.... Triggers because the function prototype was not updated when the function call signature got changed by: d5dedd4: irq: change ->set_affinity() to return status [ Impact: build fix on powerpc ] Cc: Benjamin Herrenschmidt Cc: Yinghai Lu Cc: Andrew Morton Cc: Rusty Russell Cc: linux-arch@vger.kernel.org LKML-Reference: <49F654E9.4070809@kernel.org> Signed-off-by: Ingo Molnar --- arch/powerpc/sysdev/mpic.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/sysdev/mpic.h b/arch/powerpc/sysdev/mpic.h index 3cef2af10f4..eff433c322a 100644 --- a/arch/powerpc/sysdev/mpic.h +++ b/arch/powerpc/sysdev/mpic.h @@ -36,6 +36,6 @@ static inline int mpic_pasemi_msi_init(struct mpic *mpic) extern int mpic_set_irq_type(unsigned int virq, unsigned int flow_type); extern void mpic_set_vector(unsigned int virq, unsigned int vector); -extern void mpic_set_affinity(unsigned int irq, const struct cpumask *cpumask); +extern int mpic_set_affinity(unsigned int irq, const struct cpumask *cpumask); #endif /* _POWERPC_SYSDEV_MPIC_H */ -- cgit v1.2.3 From d3584183d2f40f40371e288ceef187d04da213b5 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 7 May 2009 15:36:13 -0700 Subject: sparc64: Fix SET_PERSONALITY to not clip bits outside of PER_MASK. Signed-off-by: David S. Miller --- arch/sparc/include/asm/elf_64.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc/include/asm/elf_64.h b/arch/sparc/include/asm/elf_64.h index 425c2f9be6d..d42e393078c 100644 --- a/arch/sparc/include/asm/elf_64.h +++ b/arch/sparc/include/asm/elf_64.h @@ -208,8 +208,9 @@ do { unsigned long new_flags = current_thread_info()->flags; \ else \ clear_thread_flag(TIF_ABI_PENDING); \ /* flush_thread will update pgd cache */ \ - if (current->personality != PER_LINUX32) \ - set_personality(PER_LINUX); \ + if (personality(current->personality) != PER_LINUX32) \ + set_personality(PER_LINUX | \ + (current->personality & (~PER_MASK))); \ } while (0) #endif /* !(__ASM_SPARC64_ELF_H) */ -- cgit v1.2.3 From b9e0353fc85dab4ef5ebcef2bd09ebc4ce6d5a7b Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 6 May 2009 10:05:32 -0700 Subject: x86/acpi: remove irq-compression trick on 32-bit We already have a per cpu vector on 32-bit via recent changes, and don't need this trick any more (which trick obfuscates the real GSI mappings and which only triggers on larger systems to begin with): On 3 ioapic system (24 per ioapic) before patch I got: ACPI: PCI Interrupt Link [ILSB] enabled at IRQ 71 IOAPIC[2]: Set routing entry (10-23 -> 0xa9 -> IRQ 64 Mode:1 Active:1) pci 0000:80:01.1: PCI INT A -> Link[ILSB] -> GSI 71 (level, low) -> IRQ 64 ACPI: PCI Interrupt Link [LE5B] enabled at IRQ 67 IOAPIC[2]: Set routing entry (10-19 -> 0xb1 -> IRQ 65 Mode:1 Active:1) pci 0000:83:00.0: PCI INT B -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 65 ACPI: PCI Interrupt Link [LE5A] enabled at IRQ 66 IOAPIC[2]: Set routing entry (10-18 -> 0xb9 -> IRQ 66 Mode:1 Active:1) pci 0000:83:00.1: PCI INT A -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66 ACPI: PCI Interrupt Link [LE5D] enabled at IRQ 65 IOAPIC[2]: Set routing entry (10-17 -> 0xc1 -> IRQ 67 Mode:1 Active:1) pci 0000:84:00.0: PCI INT B -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 67 ACPI: PCI Interrupt Link [LE5C] enabled at IRQ 64 IOAPIC[2]: Set routing entry (10-16 -> 0xc9 -> IRQ 68 Mode:1 Active:1) pci 0000:84:00.1: PCI INT A -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 68 pci 0000:87:00.0: PCI INT B -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66 pci 0000:87:00.1: PCI INT A -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 67 pci 0000:88:00.0: PCI INT B -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 68 pci 0000:88:00.1: PCI INT A -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 65 pci 0000:8b:00.0: PCI INT B -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66 pci 0000:8b:00.1: PCI INT A -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 67 pci 0000:8c:00.0: PCI INT B -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 68 pci 0000:8c:00.1: PCI INT A -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 65 after the patch we get: ACPI: PCI Interrupt Link [ILSB] enabled at IRQ 71 IOAPIC[2]: Set routing entry (10-23 -> 0xa9 -> IRQ 71 Mode:1 Active:1) pci 0000:80:01.1: PCI INT A -> Link[ILSB] -> GSI 71 (level, low) -> IRQ 71 ACPI: PCI Interrupt Link [LE5B] enabled at IRQ 67 IOAPIC[2]: Set routing entry (10-19 -> 0xb1 -> IRQ 67 Mode:1 Active:1) pci 0000:83:00.0: PCI INT B -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 67 ACPI: PCI Interrupt Link [LE5A] enabled at IRQ 66 IOAPIC[2]: Set routing entry (10-18 -> 0xb9 -> IRQ 66 Mode:1 Active:1) pci 0000:83:00.1: PCI INT A -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66 ACPI: PCI Interrupt Link [LE5D] enabled at IRQ 65 IOAPIC[2]: Set routing entry (10-17 -> 0xc1 -> IRQ 65 Mode:1 Active:1) pci 0000:84:00.0: PCI INT B -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 65 ACPI: PCI Interrupt Link [LE5C] enabled at IRQ 64 IOAPIC[2]: Set routing entry (10-16 -> 0xc9 -> IRQ 64 Mode:1 Active:1) pci 0000:84:00.1: PCI INT A -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 64 pci 0000:87:00.0: PCI INT B -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66 pci 0000:87:00.1: PCI INT A -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 65 pci 0000:88:00.0: PCI INT B -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 64 pci 0000:88:00.1: PCI INT A -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 67 pci 0000:8b:00.0: PCI INT B -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66 pci 0000:8b:00.1: PCI INT A -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 65 pci 0000:8c:00.0: PCI INT B -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 64 pci 0000:8c:00.1: PCI INT A -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 67 As it can be seen that GSIs now get mapped lineary. [ Impact: simplify irq number mapping on bigger 32-bit systems ] Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: Jesse Barnes Cc: Len Brown LKML-Reference: <4A01C35C.7060207@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/kernel/acpi/boot.c | 65 +++++---------------------------------------- 1 file changed, 7 insertions(+), 58 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 6ee96b5530f..fb5e88262d2 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -1162,22 +1162,9 @@ int mp_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity) { int ioapic; int ioapic_pin; -#ifdef CONFIG_X86_32 -#define MAX_GSI_NUM 4096 -#define IRQ_COMPRESSION_START 64 - - static int pci_irq = IRQ_COMPRESSION_START; - /* - * Mapping between Global System Interrupts, which - * represent all possible interrupts, and IRQs - * assigned to actual devices. - */ - static int gsi_to_irq[MAX_GSI_NUM]; -#else if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC) return gsi; -#endif /* Don't set up the ACPI SCI because it's already set up */ if (acpi_gbl_FADT.sci_interrupt == gsi) @@ -1196,66 +1183,28 @@ int mp_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity) gsi = ioapic_renumber_irq(ioapic, gsi); #endif - /* - * Avoid pin reprogramming. PRTs typically include entries - * with redundant pin->gsi mappings (but unique PCI devices); - * we only program the IOAPIC on the first. - */ if (ioapic_pin > MP_MAX_IOAPIC_PIN) { printk(KERN_ERR "Invalid reference to IOAPIC pin " "%d-%d\n", mp_ioapic_routing[ioapic].apic_id, ioapic_pin); return gsi; } + + /* + * Avoid pin reprogramming. PRTs typically include entries + * with redundant pin->gsi mappings (but unique PCI devices); + * we only program the IOAPIC on the first. + */ if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) { pr_debug("Pin %d-%d already programmed\n", mp_ioapic_routing[ioapic].apic_id, ioapic_pin); -#ifdef CONFIG_X86_32 - return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]); -#else return gsi; -#endif } - set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed); -#ifdef CONFIG_X86_32 - /* - * For GSI >= 64, use IRQ compression - */ - if ((gsi >= IRQ_COMPRESSION_START) - && (triggering == ACPI_LEVEL_SENSITIVE)) { - /* - * For PCI devices assign IRQs in order, avoiding gaps - * due to unused I/O APIC pins. - */ - int irq = gsi; - if (gsi < MAX_GSI_NUM) { - /* - * Retain the VIA chipset work-around (gsi > 15), but - * avoid a problem where the 8254 timer (IRQ0) is setup - * via an override (so it's not on pin 0 of the ioapic), - * and at the same time, the pin 0 interrupt is a PCI - * type. The gsi > 15 test could cause these two pins - * to be shared as IRQ0, and they are not shareable. - * So test for this condition, and if necessary, avoid - * the pin collision. - */ - gsi = pci_irq++; - /* - * Don't assign IRQ used by ACPI SCI - */ - if (gsi == acpi_gbl_FADT.sci_interrupt) - gsi = pci_irq++; - gsi_to_irq[irq] = gsi; - } else { - printk(KERN_ERR "GSI %u is too high\n", gsi); - return gsi; - } - } -#endif io_apic_set_pci_routing(dev, ioapic, ioapic_pin, gsi, triggering == ACPI_EDGE_SENSITIVE ? 0 : 1, polarity == ACPI_ACTIVE_HIGH ? 0 : 1); + return gsi; } -- cgit v1.2.3 From ee214558c2e959781a406e76c5b34364da638e1d Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 6 May 2009 10:07:07 -0700 Subject: x86: fix alloc_mptable() Fix the conditions when we stop updating the mptable due to running out of slots. [ Impact: fix memory corruption / non-working update_mptable boot parameter ] Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: Jesse Barnes Cc: Len Brown LKML-Reference: <4A01C3BB.1000609@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/kernel/mpparse.c | 25 +++++++++---------------- 1 file changed, 9 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index 70fd7e414c1..cd2a41a7c45 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -870,24 +870,17 @@ static inline void __init check_irq_src(struct mpc_intsrc *m, int *nr_m_spare) {} #endif /* CONFIG_X86_IO_APIC */ -static int check_slot(unsigned long mpc_new_phys, unsigned long mpc_new_length, - int count) +static int +check_slot(unsigned long mpc_new_phys, unsigned long mpc_new_length, int count) { - if (!mpc_new_phys) { - pr_info("No spare slots, try to append...take your risk, " - "new mpc_length %x\n", count); - } else { - if (count <= mpc_new_length) - pr_info("No spare slots, try to append..., " - "new mpc_length %x\n", count); - else { - pr_err("mpc_new_length %lx is too small\n", - mpc_new_length); - return -1; - } + int ret = 0; + + if (!mpc_new_phys || count <= mpc_new_length) { + WARN(1, "update_mptable: No spare slots (length: %x)\n", count); + return -1; } - return 0; + return ret; } static int __init replace_intsrc_all(struct mpc_table *mpc, @@ -946,7 +939,7 @@ static int __init replace_intsrc_all(struct mpc_table *mpc, } else { struct mpc_intsrc *m = (struct mpc_intsrc *)mpt; count += sizeof(struct mpc_intsrc); - if (!check_slot(mpc_new_phys, mpc_new_length, count)) + if (check_slot(mpc_new_phys, mpc_new_length, count) < 0) goto out; assign_to_mpc_intsrc(&mp_irqs[i], m); mpc->length = count; -- cgit v1.2.3 From a31f82057ce6f7ced578d64c07a72ccbdc7336e4 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 6 May 2009 10:06:15 -0700 Subject: x86/acpi: call mp_config_acpi_gsi() in mp_register_gsi() The patch to call mp_config_acpi_gsi() from the ACPI IRQ registration code never got mainline because there were open discussions about it. This call is needed to properly update the kernel's copy of the mptable, when the update_mptable boot parameter is needed. Now that the dust has settled with the APIC unification, and since there were no objections when the patch was re-submitted, try this again. [ Impact: fix the update_mptable boot parameter ] Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: Jesse Barnes Cc: Len Brown LKML-Reference: <4A01C387.7090103@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/mpspec.h | 9 ------ arch/x86/kernel/acpi/boot.c | 66 ++++++++++++++++++++++++++----------------- 2 files changed, 40 insertions(+), 35 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h index 3ea1f531f53..c34961a45ec 100644 --- a/arch/x86/include/asm/mpspec.h +++ b/arch/x86/include/asm/mpspec.h @@ -77,17 +77,8 @@ extern int mp_register_gsi(struct device *dev, u32 gsi, int edge_level, int active_high_low); extern int acpi_probe_gsi(void); #ifdef CONFIG_X86_IO_APIC -extern int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin, - u32 gsi, int triggering, int polarity); extern int mp_find_ioapic(int gsi); extern int mp_find_ioapic_pin(int ioapic, int gsi); -#else -static inline int -mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin, - u32 gsi, int triggering, int polarity) -{ - return 0; -} #endif #else /* !CONFIG_ACPI: */ static inline int acpi_probe_gsi(void) diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index fb5e88262d2..8019ecf66e9 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include @@ -1158,6 +1159,44 @@ void __init mp_config_acpi_legacy_irqs(void) } } +static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int triggering, + int polarity) +{ +#ifdef CONFIG_X86_MPPARSE + struct mpc_intsrc mp_irq; + struct pci_dev *pdev; + unsigned char number; + unsigned int devfn; + int ioapic; + u8 pin; + + if (!acpi_ioapic) + return 0; + if (!dev) + return 0; + if (dev->bus != &pci_bus_type) + return 0; + + pdev = to_pci_dev(dev); + number = pdev->bus->number; + devfn = pdev->devfn; + pin = pdev->pin; + /* print the entry should happen on mptable identically */ + mp_irq.type = MP_INTSRC; + mp_irq.irqtype = mp_INT; + mp_irq.irqflag = (triggering == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) | + (polarity == ACPI_ACTIVE_HIGH ? 1 : 3); + mp_irq.srcbus = number; + mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3); + ioapic = mp_find_ioapic(gsi); + mp_irq.dstapic = mp_ioapic_routing[ioapic].apic_id; + mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi); + + save_mp_irq(&mp_irq); +#endif + return 0; +} + int mp_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity) { int ioapic; @@ -1189,6 +1228,7 @@ int mp_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity) ioapic_pin); return gsi; } + mp_config_acpi_gsi(dev, gsi, triggering, polarity); /* * Avoid pin reprogramming. PRTs typically include entries @@ -1208,32 +1248,6 @@ int mp_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity) return gsi; } -int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin, - u32 gsi, int triggering, int polarity) -{ -#ifdef CONFIG_X86_MPPARSE - struct mpc_intsrc mp_irq; - int ioapic; - - if (!acpi_ioapic) - return 0; - - /* print the entry should happen on mptable identically */ - mp_irq.type = MP_INTSRC; - mp_irq.irqtype = mp_INT; - mp_irq.irqflag = (triggering == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) | - (polarity == ACPI_ACTIVE_HIGH ? 1 : 3); - mp_irq.srcbus = number; - mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3); - ioapic = mp_find_ioapic(gsi); - mp_irq.dstapic = mp_ioapic_routing[ioapic].apic_id; - mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi); - - save_mp_irq(&mp_irq); -#endif - return 0; -} - /* * Parse IOAPIC related entries in MADT * returns 0 on success, < 0 on error -- cgit v1.2.3 From bdfe8ac153546537ed24de69610ea781a734f785 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 6 May 2009 10:07:41 -0700 Subject: x86/acpi: move pin_programmed bit map to io_apic.c Prepare to call setup_io_apic_routing() in pcibios_irq_enable() also remove not needed member apic_id. [ Impact: clean up, prepare for future change ] Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: Jesse Barnes Cc: Len Brown LKML-Reference: <4A01C3DD.3050104@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/kernel/acpi/boot.c | 18 ++---------------- arch/x86/kernel/apic/io_apic.c | 25 ++++++++++++++++++++++++- 2 files changed, 26 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 8019ecf66e9..dcfbc3ab9e4 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -904,10 +904,8 @@ extern int es7000_plat; #endif static struct { - int apic_id; int gsi_base; int gsi_end; - DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1); } mp_ioapic_routing[MAX_IO_APICS]; int mp_find_ioapic(int gsi) @@ -996,7 +994,6 @@ void __init mp_register_ioapic(int id, u32 address, u32 gsi_base) * Build basic GSI lookup table to facilitate gsi->io_apic lookups * and to prevent reprogramming of IOAPIC pins (PCI GSIs). */ - mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].apicid; mp_ioapic_routing[idx].gsi_base = gsi_base; mp_ioapic_routing[idx].gsi_end = gsi_base + io_apic_get_redir_entries(idx); @@ -1189,7 +1186,7 @@ static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int triggering, mp_irq.srcbus = number; mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3); ioapic = mp_find_ioapic(gsi); - mp_irq.dstapic = mp_ioapic_routing[ioapic].apic_id; + mp_irq.dstapic = mp_ioapics[ioapic].apicid; mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi); save_mp_irq(&mp_irq); @@ -1224,23 +1221,12 @@ int mp_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity) if (ioapic_pin > MP_MAX_IOAPIC_PIN) { printk(KERN_ERR "Invalid reference to IOAPIC pin " - "%d-%d\n", mp_ioapic_routing[ioapic].apic_id, + "%d-%d\n", mp_ioapics[ioapic].apicid, ioapic_pin); return gsi; } mp_config_acpi_gsi(dev, gsi, triggering, polarity); - /* - * Avoid pin reprogramming. PRTs typically include entries - * with redundant pin->gsi mappings (but unique PCI devices); - * we only program the IOAPIC on the first. - */ - if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) { - pr_debug("Pin %d-%d already programmed\n", - mp_ioapic_routing[ioapic].apic_id, ioapic_pin); - return gsi; - } - set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed); io_apic_set_pci_routing(dev, ioapic, ioapic_pin, gsi, triggering == ACPI_EDGE_SENSITIVE ? 0 : 1, polarity == ACPI_ACTIVE_HIGH ? 0 : 1); diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 21c30e1121e..e279ae33928 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -3922,7 +3922,7 @@ int __init io_apic_get_version(int ioapic) } #endif -int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq, +static int __io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq, int triggering, int polarity) { struct irq_desc *desc; @@ -3959,6 +3959,29 @@ int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq, return 0; } +static struct { + DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1); +} mp_ioapic_routing[MAX_IO_APICS]; + +int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq, + int triggering, int polarity) +{ + + /* + * Avoid pin reprogramming. PRTs typically include entries + * with redundant pin->gsi mappings (but unique PCI devices); + * we only program the IOAPIC on the first. + */ + if (test_bit(pin, mp_ioapic_routing[ioapic].pin_programmed)) { + pr_debug("Pin %d-%d already programmed\n", + mp_ioapics[ioapic].apicid, pin); + return 0; + } + set_bit(pin, mp_ioapic_routing[ioapic].pin_programmed); + + return __io_apic_set_pci_routing(dev, ioapic, pin, irq, + triggering, polarity); +} int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity) { -- cgit v1.2.3 From e20c06fd6950265a899edd96a02dc2e6ae2d1ce5 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 6 May 2009 10:08:22 -0700 Subject: x86/pci: add 4 more return parameters to IO_APIC_get_PCI_irq_vector() To prepare those params for pcibios_irq_enable() to call setup_io_apic_routing(). [ Impact: extend function call API to prepare for new functionality ] Signed-off-by: Yinghai Lu Acked-by: Jesse Barnes Cc: Len Brown Cc: Andrew Morton LKML-Reference: <4A01C406.2040303@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/hw_irq.h | 4 +- arch/x86/kernel/apic/io_apic.c | 107 +++++++++++++++++++++++------------------ arch/x86/pci/irq.c | 24 +++++++-- 3 files changed, 82 insertions(+), 53 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h index b762ea49bd7..26a40ab7013 100644 --- a/arch/x86/include/asm/hw_irq.h +++ b/arch/x86/include/asm/hw_irq.h @@ -63,7 +63,9 @@ extern unsigned long io_apic_irqs; extern void init_VISWS_APIC_irqs(void); extern void setup_IO_APIC(void); extern void disable_IO_APIC(void); -extern int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn); +extern int IO_APIC_get_PCI_irq_vector(int bus, int devfn, int pin, + int *ioapic, int *ioapic_pin, + int *trigger, int *polarity); extern void setup_ioapic_dest(void); extern void enable_IO_APIC(void); diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index e279ae33928..caf9dbdde05 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -873,54 +873,6 @@ static int __init find_isa_irq_apic(int irq, int type) return -1; } -/* - * Find a specific PCI IRQ entry. - * Not an __init, possibly needed by modules - */ -static int pin_2_irq(int idx, int apic, int pin); - -int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) -{ - int apic, i, best_guess = -1; - - apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n", - bus, slot, pin); - if (test_bit(bus, mp_bus_not_pci)) { - apic_printk(APIC_VERBOSE, "PCI BIOS passed nonexistent PCI bus %d!\n", bus); - return -1; - } - for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].srcbus; - - for (apic = 0; apic < nr_ioapics; apic++) - if (mp_ioapics[apic].apicid == mp_irqs[i].dstapic || - mp_irqs[i].dstapic == MP_APIC_ALL) - break; - - if (!test_bit(lbus, mp_bus_not_pci) && - !mp_irqs[i].irqtype && - (bus == lbus) && - (slot == ((mp_irqs[i].srcbusirq >> 2) & 0x1f))) { - int irq = pin_2_irq(i, apic, mp_irqs[i].dstirq); - - if (!(apic || IO_APIC_IRQ(irq))) - continue; - - if (pin == (mp_irqs[i].srcbusirq & 3)) - return irq; - /* - * Use the first all-but-pin matching entry as a - * best-guess fuzzy result for broken mptables. - */ - if (best_guess < 0) - best_guess = irq; - } - } - return best_guess; -} - -EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector); - #if defined(CONFIG_EISA) || defined(CONFIG_MCA) /* * EISA Edge/Level control register, ELCR @@ -1139,6 +1091,65 @@ static int pin_2_irq(int idx, int apic, int pin) return irq; } +/* + * Find a specific PCI IRQ entry. + * Not an __init, possibly needed by modules + */ +int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin, + int *ioapic, int *ioapic_pin, + int *trigger, int *polarity) +{ + int apic, i, best_guess = -1; + + apic_printk(APIC_DEBUG, + "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n", + bus, slot, pin); + if (test_bit(bus, mp_bus_not_pci)) { + apic_printk(APIC_VERBOSE, + "PCI BIOS passed nonexistent PCI bus %d!\n", bus); + return -1; + } + for (i = 0; i < mp_irq_entries; i++) { + int lbus = mp_irqs[i].srcbus; + + for (apic = 0; apic < nr_ioapics; apic++) + if (mp_ioapics[apic].apicid == mp_irqs[i].dstapic || + mp_irqs[i].dstapic == MP_APIC_ALL) + break; + + if (!test_bit(lbus, mp_bus_not_pci) && + !mp_irqs[i].irqtype && + (bus == lbus) && + (slot == ((mp_irqs[i].srcbusirq >> 2) & 0x1f))) { + int irq = pin_2_irq(i, apic, mp_irqs[i].dstirq); + + if (!(apic || IO_APIC_IRQ(irq))) + continue; + + if (pin == (mp_irqs[i].srcbusirq & 3)) { + *ioapic = apic; + *ioapic_pin = mp_irqs[i].dstirq; + *trigger = irq_trigger(i); + *polarity = irq_polarity(i); + return irq; + } + /* + * Use the first all-but-pin matching entry as a + * best-guess fuzzy result for broken mptables. + */ + if (best_guess < 0) { + *ioapic = apic; + *ioapic_pin = mp_irqs[i].dstirq; + *trigger = irq_trigger(i); + *polarity = irq_polarity(i); + best_guess = irq; + } + } + } + return best_guess; +} +EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector); + void lock_vector_lock(void) { /* Used to the online set of cpus does not change diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c index fecbce6e7d7..a2f6bde9c4e 100644 --- a/arch/x86/pci/irq.c +++ b/arch/x86/pci/irq.c @@ -1051,12 +1051,16 @@ static void __init pcibios_fixup_irqs(void) */ if (io_apic_assign_pci_irqs) { int irq; + int ioapic = -1, ioapic_pin = -1; + int triggering, polarity; /* * interrupt pins are numbered starting from 1 */ irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, - PCI_SLOT(dev->devfn), pin - 1); + PCI_SLOT(dev->devfn), pin - 1, + &ioapic, &ioapic_pin, + &triggering, &polarity); /* * Busses behind bridges are typically not listed in the * MP-table. In this case we have to look up the IRQ @@ -1072,7 +1076,10 @@ static void __init pcibios_fixup_irqs(void) pin = pci_swizzle_interrupt_pin(dev, pin); bus = bridge->bus->number; irq = IO_APIC_get_PCI_irq_vector(bus, - PCI_SLOT(bridge->devfn), pin - 1); + PCI_SLOT(bridge->devfn), + pin - 1, + &ioapic, &ioapic_pin, + &triggering, &polarity); if (irq >= 0) dev_warn(&dev->dev, "using bridge %s INT %c to " @@ -1221,8 +1228,14 @@ static int pirq_enable_irq(struct pci_dev *dev) if (io_apic_assign_pci_irqs) { int irq; + int ioapic = -1, ioapic_pin = -1; + int triggering, polarity; - irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, PCI_SLOT(dev->devfn), pin - 1); + irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, + PCI_SLOT(dev->devfn), + pin - 1, + &ioapic, &ioapic_pin, + &triggering, &polarity); /* * Busses behind bridges are typically not listed in the MP-table. * In this case we have to look up the IRQ based on the parent bus, @@ -1235,7 +1248,10 @@ static int pirq_enable_irq(struct pci_dev *dev) pin = pci_swizzle_interrupt_pin(dev, pin); irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number, - PCI_SLOT(bridge->devfn), pin - 1); + PCI_SLOT(bridge->devfn), + pin - 1, + &ioapic, &ioapic_pin, + &triggering, &polarity); if (irq >= 0) dev_warn(&dev->dev, "using bridge %s " "INT %c to get IRQ %d\n", -- cgit v1.2.3 From 5ef2183768bb7d64b85eccbfa1537a61cbefa97c Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 6 May 2009 10:08:50 -0700 Subject: x86/acpi: move setup io apic routing out of CONFIG_ACPI scope So we could set io apic routing when ACPI is not enabled. [ Impact: prepare for new functionality ] Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: Jesse Barnes Cc: Len Brown LKML-Reference: <4A01C422.5070400@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/io_apic.h | 4 +- arch/x86/kernel/apic/io_apic.c | 122 ++++++++++++++++++++--------------------- 2 files changed, 63 insertions(+), 63 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h index 27bd2fdd00a..6fd99f96eb0 100644 --- a/arch/x86/include/asm/io_apic.h +++ b/arch/x86/include/asm/io_apic.h @@ -154,10 +154,10 @@ extern int timer_through_8259; extern int io_apic_get_unique_id(int ioapic, int apic_id); extern int io_apic_get_version(int ioapic); extern int io_apic_get_redir_entries(int ioapic); -extern int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, - int irq, int edge_level, int active_high_low); #endif /* CONFIG_ACPI */ +extern int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, + int irq, int edge_level, int active_high_low); extern int (*ioapic_renumber_irq)(int ioapic, int irq); extern void ioapic_init_mappings(void); diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index caf9dbdde05..3a68daee0d9 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -3839,6 +3839,67 @@ int __init arch_probe_nr_irqs(void) } #endif +static int __io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq, + int triggering, int polarity) +{ + struct irq_desc *desc; + struct irq_cfg *cfg; + int node; + + if (!IO_APIC_IRQ(irq)) { + apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n", + ioapic); + return -EINVAL; + } + + if (dev) + node = dev_to_node(dev); + else + node = cpu_to_node(boot_cpu_id); + + desc = irq_to_desc_alloc_node(irq, node); + if (!desc) { + printk(KERN_INFO "can not get irq_desc %d\n", irq); + return 0; + } + + /* + * IRQs < 16 are already in the irq_2_pin[] map + */ + if (irq >= NR_IRQS_LEGACY) { + cfg = desc->chip_data; + add_pin_to_irq_node(cfg, node, ioapic, pin); + } + + setup_IO_APIC_irq(ioapic, pin, irq, desc, triggering, polarity); + + return 0; +} + +static struct { + DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1); +} mp_ioapic_routing[MAX_IO_APICS]; + +int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq, + int triggering, int polarity) +{ + + /* + * Avoid pin reprogramming. PRTs typically include entries + * with redundant pin->gsi mappings (but unique PCI devices); + * we only program the IOAPIC on the first. + */ + if (test_bit(pin, mp_ioapic_routing[ioapic].pin_programmed)) { + pr_debug("Pin %d-%d already programmed\n", + mp_ioapics[ioapic].apicid, pin); + return 0; + } + set_bit(pin, mp_ioapic_routing[ioapic].pin_programmed); + + return __io_apic_set_pci_routing(dev, ioapic, pin, irq, + triggering, polarity); +} + /* -------------------------------------------------------------------------- ACPI-based IOAPIC Configuration -------------------------------------------------------------------------- */ @@ -3933,67 +3994,6 @@ int __init io_apic_get_version(int ioapic) } #endif -static int __io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq, - int triggering, int polarity) -{ - struct irq_desc *desc; - struct irq_cfg *cfg; - int node; - - if (!IO_APIC_IRQ(irq)) { - apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n", - ioapic); - return -EINVAL; - } - - if (dev) - node = dev_to_node(dev); - else - node = cpu_to_node(boot_cpu_id); - - desc = irq_to_desc_alloc_node(irq, node); - if (!desc) { - printk(KERN_INFO "can not get irq_desc %d\n", irq); - return 0; - } - - /* - * IRQs < 16 are already in the irq_2_pin[] map - */ - if (irq >= NR_IRQS_LEGACY) { - cfg = desc->chip_data; - add_pin_to_irq_node(cfg, node, ioapic, pin); - } - - setup_IO_APIC_irq(ioapic, pin, irq, desc, triggering, polarity); - - return 0; -} - -static struct { - DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1); -} mp_ioapic_routing[MAX_IO_APICS]; - -int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq, - int triggering, int polarity) -{ - - /* - * Avoid pin reprogramming. PRTs typically include entries - * with redundant pin->gsi mappings (but unique PCI devices); - * we only program the IOAPIC on the first. - */ - if (test_bit(pin, mp_ioapic_routing[ioapic].pin_programmed)) { - pr_debug("Pin %d-%d already programmed\n", - mp_ioapics[ioapic].apicid, pin); - return 0; - } - set_bit(pin, mp_ioapic_routing[ioapic].pin_programmed); - - return __io_apic_set_pci_routing(dev, ioapic, pin, irq, - triggering, polarity); -} - int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity) { int i; -- cgit v1.2.3 From b9c61b70075c87a8612624736faf4a2de5b1ed30 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 6 May 2009 10:10:06 -0700 Subject: x86/pci: update pirq_enable_irq() to setup io apic routing So we can set io apic routing only when enabling the device irq. This is advantageous for IRQ descriptor allocation affinity: if we set up the IO-APIC entry later, we have a chance to allocate the IRQ descriptor later and know which device it is on and can set affinity accordingly. [ Impact: standardize/enhance irq-enabling sequence for mptable irqs ] Signed-off-by: Yinghai Lu Acked-by: Jesse Barnes Cc: Len Brown Cc: Andrew Morton LKML-Reference: <4A01C46E.8000501@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/io_apic.c | 150 ++++++++++++++++++++--------------------- arch/x86/pci/irq.c | 84 +++++++++-------------- 2 files changed, 104 insertions(+), 130 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 3a68daee0d9..5d5f4120c74 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -1480,9 +1480,13 @@ static void setup_IO_APIC_irq(int apic_id, int pin, unsigned int irq, struct irq ioapic_write_entry(apic_id, pin, entry); } +static struct { + DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1); +} mp_ioapic_routing[MAX_IO_APICS]; + static void __init setup_IO_APIC_irqs(void) { - int apic_id, pin, idx, irq; + int apic_id = 0, pin, idx, irq; int notcon = 0; struct irq_desc *desc; struct irq_cfg *cfg; @@ -1490,48 +1494,53 @@ static void __init setup_IO_APIC_irqs(void) apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n"); - for (apic_id = 0; apic_id < nr_ioapics; apic_id++) { - for (pin = 0; pin < nr_ioapic_registers[apic_id]; pin++) { - - idx = find_irq_entry(apic_id, pin, mp_INT); - if (idx == -1) { - if (!notcon) { - notcon = 1; - apic_printk(APIC_VERBOSE, - KERN_DEBUG " %d-%d", - mp_ioapics[apic_id].apicid, pin); - } else - apic_printk(APIC_VERBOSE, " %d-%d", - mp_ioapics[apic_id].apicid, pin); - continue; - } - if (notcon) { - apic_printk(APIC_VERBOSE, - " (apicid-pin) not connected\n"); - notcon = 0; - } +#ifdef CONFIG_ACPI + if (!acpi_disabled && acpi_ioapic) { + apic_id = mp_find_ioapic(0); + if (apic_id < 0) + apic_id = 0; + } +#endif - irq = pin_2_irq(idx, apic_id, pin); + for (pin = 0; pin < nr_ioapic_registers[apic_id]; pin++) { + idx = find_irq_entry(apic_id, pin, mp_INT); + if (idx == -1) { + if (!notcon) { + notcon = 1; + apic_printk(APIC_VERBOSE, + KERN_DEBUG " %d-%d", + mp_ioapics[apic_id].apicid, pin); + } else + apic_printk(APIC_VERBOSE, " %d-%d", + mp_ioapics[apic_id].apicid, pin); + continue; + } + if (notcon) { + apic_printk(APIC_VERBOSE, + " (apicid-pin) not connected\n"); + notcon = 0; + } - /* - * Skip the timer IRQ if there's a quirk handler - * installed and if it returns 1: - */ - if (apic->multi_timer_check && - apic->multi_timer_check(apic_id, irq)) - continue; + irq = pin_2_irq(idx, apic_id, pin); - desc = irq_to_desc_alloc_node(irq, node); - if (!desc) { - printk(KERN_INFO "can not get irq_desc for %d\n", irq); - continue; - } - cfg = desc->chip_data; - add_pin_to_irq_node(cfg, node, apic_id, pin); + /* + * Skip the timer IRQ if there's a quirk handler + * installed and if it returns 1: + */ + if (apic->multi_timer_check && + apic->multi_timer_check(apic_id, irq)) + continue; - setup_IO_APIC_irq(apic_id, pin, irq, desc, - irq_trigger(idx), irq_polarity(idx)); + desc = irq_to_desc_alloc_node(irq, node); + if (!desc) { + printk(KERN_INFO "can not get irq_desc for %d\n", irq); + continue; } + cfg = desc->chip_data; + add_pin_to_irq_node(cfg, node, apic_id, pin); + set_bit(pin, mp_ioapic_routing[apic_id].pin_programmed); + setup_IO_APIC_irq(apic_id, pin, irq, desc, + irq_trigger(idx), irq_polarity(idx)); } if (notcon) @@ -3876,10 +3885,6 @@ static int __io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, in return 0; } -static struct { - DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1); -} mp_ioapic_routing[MAX_IO_APICS]; - int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq, int triggering, int polarity) { @@ -4023,51 +4028,44 @@ int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity) #ifdef CONFIG_SMP void __init setup_ioapic_dest(void) { - int pin, ioapic, irq, irq_entry; + int pin, ioapic = 0, irq, irq_entry; struct irq_desc *desc; - struct irq_cfg *cfg; const struct cpumask *mask; if (skip_ioapic_setup == 1) return; - for (ioapic = 0; ioapic < nr_ioapics; ioapic++) { - for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) { - irq_entry = find_irq_entry(ioapic, pin, mp_INT); - if (irq_entry == -1) - continue; - irq = pin_2_irq(irq_entry, ioapic, pin); - - /* setup_IO_APIC_irqs could fail to get vector for some device - * when you have too many devices, because at that time only boot - * cpu is online. - */ - desc = irq_to_desc(irq); - cfg = desc->chip_data; - if (!cfg->vector) { - setup_IO_APIC_irq(ioapic, pin, irq, desc, - irq_trigger(irq_entry), - irq_polarity(irq_entry)); - continue; +#ifdef CONFIG_ACPI + if (!acpi_disabled && acpi_ioapic) { + ioapic = mp_find_ioapic(0); + if (ioapic < 0) + ioapic = 0; + } +#endif - } + for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) { + irq_entry = find_irq_entry(ioapic, pin, mp_INT); + if (irq_entry == -1) + continue; + irq = pin_2_irq(irq_entry, ioapic, pin); - /* - * Honour affinities which have been set in early boot - */ - if (desc->status & - (IRQ_NO_BALANCING | IRQ_AFFINITY_SET)) - mask = desc->affinity; - else - mask = apic->target_cpus(); + desc = irq_to_desc(irq); - if (intr_remapping_enabled) - set_ir_ioapic_affinity_irq_desc(desc, mask); - else - set_ioapic_affinity_irq_desc(desc, mask); - } + /* + * Honour affinities which have been set in early boot + */ + if (desc->status & + (IRQ_NO_BALANCING | IRQ_AFFINITY_SET)) + mask = desc->affinity; + else + mask = apic->target_cpus(); + if (intr_remapping_enabled) + set_ir_ioapic_affinity_irq_desc(desc, mask); + else + set_ioapic_affinity_irq_desc(desc, mask); } + } #endif diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c index a2f6bde9c4e..2f3e192615c 100644 --- a/arch/x86/pci/irq.c +++ b/arch/x86/pci/irq.c @@ -889,6 +889,9 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign) return 0; } + if (io_apic_assign_pci_irqs) + return 0; + /* Find IRQ routing entry */ if (!pirq_table) @@ -1039,63 +1042,15 @@ static void __init pcibios_fixup_irqs(void) pirq_penalty[dev->irq]++; } + if (io_apic_assign_pci_irqs) + return; + dev = NULL; while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); if (!pin) continue; -#ifdef CONFIG_X86_IO_APIC - /* - * Recalculate IRQ numbers if we use the I/O APIC. - */ - if (io_apic_assign_pci_irqs) { - int irq; - int ioapic = -1, ioapic_pin = -1; - int triggering, polarity; - - /* - * interrupt pins are numbered starting from 1 - */ - irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, - PCI_SLOT(dev->devfn), pin - 1, - &ioapic, &ioapic_pin, - &triggering, &polarity); - /* - * Busses behind bridges are typically not listed in the - * MP-table. In this case we have to look up the IRQ - * based on the parent bus, parent slot, and pin number. - * The SMP code detects such bridged busses itself so we - * should get into this branch reliably. - */ - if (irq < 0 && dev->bus->parent) { - /* go back to the bridge */ - struct pci_dev *bridge = dev->bus->self; - int bus; - - pin = pci_swizzle_interrupt_pin(dev, pin); - bus = bridge->bus->number; - irq = IO_APIC_get_PCI_irq_vector(bus, - PCI_SLOT(bridge->devfn), - pin - 1, - &ioapic, &ioapic_pin, - &triggering, &polarity); - if (irq >= 0) - dev_warn(&dev->dev, - "using bridge %s INT %c to " - "get IRQ %d\n", - pci_name(bridge), - 'A' + pin - 1, irq); - } - if (irq >= 0) { - dev_info(&dev->dev, - "PCI->APIC IRQ transform: INT %c " - "-> IRQ %d\n", - 'A' + pin - 1, irq); - dev->irq = irq; - } - } -#endif /* * Still no IRQ? Try to lookup one... */ @@ -1190,6 +1145,19 @@ int __init pcibios_irq_init(void) pcibios_enable_irq = pirq_enable_irq; pcibios_fixup_irqs(); + + if (io_apic_assign_pci_irqs && pci_routeirq) { + struct pci_dev *dev = NULL; + /* + * PCI IRQ routing is set up by pci_enable_device(), but we + * also do it here in case there are still broken drivers that + * don't use pci_enable_device(). + */ + printk(KERN_INFO "PCI: Routing PCI interrupts for all devices because \"pci=routeirq\" specified\n"); + for_each_pci_dev(dev) + pirq_enable_irq(dev); + } + return 0; } @@ -1220,13 +1188,17 @@ void pcibios_penalize_isa_irq(int irq, int active) static int pirq_enable_irq(struct pci_dev *dev) { u8 pin; - struct pci_dev *temp_dev; pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); - if (pin && !pcibios_lookup_irq(dev, 1) && !dev->irq) { + if (pin && !pcibios_lookup_irq(dev, 1)) { char *msg = ""; + if (!io_apic_assign_pci_irqs && dev->irq) + return 0; + if (io_apic_assign_pci_irqs) { +#ifdef CONFIG_X86_IO_APIC + struct pci_dev *temp_dev; int irq; int ioapic = -1, ioapic_pin = -1; int triggering, polarity; @@ -1261,12 +1233,16 @@ static int pirq_enable_irq(struct pci_dev *dev) } dev = temp_dev; if (irq >= 0) { + io_apic_set_pci_routing(&dev->dev, ioapic, + ioapic_pin, irq, + triggering, polarity); + dev->irq = irq; dev_info(&dev->dev, "PCI->APIC IRQ transform: " "INT %c -> IRQ %d\n", 'A' + pin - 1, irq); - dev->irq = irq; return 0; } else msg = "; probably buggy MP table"; +#endif } else if (pci_probe & PCI_BIOS_IRQ_SCAN) msg = ""; else -- cgit v1.2.3 From 61fe91e1319556f32bebfd7ed2c68ef02e2c17f7 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 9 May 2009 23:47:42 -0700 Subject: x86: apic: Check rev 3 fadt correctly for physical_apic bit Impact: fix fadt version checking FADT2_REVISION_ID has value 3 aka rev 3 FADT. So need to use >= instead of >, as other places in the code do. [ Impact: extend scope of APIC boot quirk ] Signed-off-by: Yinghai Lu LKML-Reference: Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/apic_flat_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c index 306e5e88fb6..744e6d8af27 100644 --- a/arch/x86/kernel/apic/apic_flat_64.c +++ b/arch/x86/kernel/apic/apic_flat_64.c @@ -235,7 +235,7 @@ static int physflat_acpi_madt_oem_check(char *oem_id, char *oem_table_id) * regardless of how many processors are present (x86_64 ES7000 * is an example). */ - if (acpi_gbl_FADT.header.revision > FADT2_REVISION_ID && + if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID && (acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL)) { printk(KERN_DEBUG "system APIC only can use physical flat"); return 1; -- cgit v1.2.3 From 3e0c373749d7eb5b354ac0b043f2b2cdf84eefef Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 9 May 2009 23:47:42 -0700 Subject: x86: clean up and fix setup_clear/force_cpu_cap handling setup_force_cpu_cap() only have one user (Xen guest code), but it should not reuse cleared_cpu_cpus, otherwise it will have problems on SMP. Need to have a separate cpu_cpus_set array too, for forced-on flags, beyond the forced-off flags. Also need to setup handling before all cpus caps are combined. [ Impact: fix the forced-set CPU feature flag logic ] Cc: H. Peter Anvin Cc: Jeremy Fitzhardinge Cc: Rusty Russell Signed-off-by: Yinghai Lu LKML-Reference: Signed-off-by: Ingo Molnar --- arch/x86/include/asm/cpufeature.h | 4 ++-- arch/x86/include/asm/processor.h | 3 ++- arch/x86/kernel/cpu/common.c | 17 ++++++++++++----- 3 files changed, 16 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h index ccc1061b8b2..13cc6a503a0 100644 --- a/arch/x86/include/asm/cpufeature.h +++ b/arch/x86/include/asm/cpufeature.h @@ -192,11 +192,11 @@ extern const char * const x86_power_flags[32]; #define clear_cpu_cap(c, bit) clear_bit(bit, (unsigned long *)((c)->x86_capability)) #define setup_clear_cpu_cap(bit) do { \ clear_cpu_cap(&boot_cpu_data, bit); \ - set_bit(bit, (unsigned long *)cleared_cpu_caps); \ + set_bit(bit, (unsigned long *)cpu_caps_cleared); \ } while (0) #define setup_force_cpu_cap(bit) do { \ set_cpu_cap(&boot_cpu_data, bit); \ - clear_bit(bit, (unsigned long *)cleared_cpu_caps); \ + set_bit(bit, (unsigned long *)cpu_caps_set); \ } while (0) #define cpu_has_fpu boot_cpu_has(X86_FEATURE_FPU) diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index c2cceae709c..fed93fec976 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -135,7 +135,8 @@ extern struct cpuinfo_x86 boot_cpu_data; extern struct cpuinfo_x86 new_cpu_data; extern struct tss_struct doublefault_tss; -extern __u32 cleared_cpu_caps[NCAPINTS]; +extern __u32 cpu_caps_cleared[NCAPINTS]; +extern __u32 cpu_caps_set[NCAPINTS]; #ifdef CONFIG_SMP DECLARE_PER_CPU_SHARED_ALIGNED(struct cpuinfo_x86, cpu_info); diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index c4f667896c2..e7fd5c4935a 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -292,7 +292,8 @@ static const char *__cpuinit table_lookup_model(struct cpuinfo_x86 *c) return NULL; /* Not found */ } -__u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata; +__u32 cpu_caps_cleared[NCAPINTS] __cpuinitdata; +__u32 cpu_caps_set[NCAPINTS] __cpuinitdata; void load_percpu_segment(int cpu) { @@ -806,6 +807,16 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c) #endif init_hypervisor(c); + + /* + * Clear/Set all flags overriden by options, need do it + * before following smp all cpus cap AND. + */ + for (i = 0; i < NCAPINTS; i++) { + c->x86_capability[i] &= ~cpu_caps_cleared[i]; + c->x86_capability[i] |= cpu_caps_set[i]; + } + /* * On SMP, boot_cpu_data holds the common feature set between * all CPUs; so make sure that we indicate which features are @@ -818,10 +829,6 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c) boot_cpu_data.x86_capability[i] &= c->x86_capability[i]; } - /* Clear all flags overriden by options */ - for (i = 0; i < NCAPINTS; i++) - c->x86_capability[i] &= ~cleared_cpu_caps[i]; - #ifdef CONFIG_X86_MCE /* Init Machine Check Exception if available. */ mcheck_init(c); -- cgit v1.2.3 From 4401da6111ac58f94234417427d06a72c4048c74 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 2 May 2009 10:40:57 -0700 Subject: x86: read apic ID in the !acpi_lapic case Ed found that on 32-bit, boot_cpu_physical_apicid is not read right, when the mptable is broken. Interestingly, actually three paths use/set it: 1. acpi: at that time that is already read from reg 2. mptable: only read from mptable 3. no madt, and no mptable, that use default apic id 0 for 64-bit, -1 for 32-bit so we could read the apic id for the 2/3 path. We trust the hardware register more than we trust a BIOS data structure (the mptable). We can also avoid the double set_fixmap() when acpi_lapic is used, and also need to move cpu_has_apic earlier and call apic_disable(). Also when need to update the apic id, we'd better read and set the apic version as well - so that quirks are applied precisely. v2: make path 3 with 64bit, use -1 as apic id, so could read it later. v3: fix whitespace problem pointed out by Ed Swierk [ Impact: get correct apic id for bsp other than acpi path ] Reported-by: Ed Swierk Signed-off-by: Yinghai Lu Acked-by: Cyrill Gorcunov LKML-Reference: <49FC85A9.2070702@kernel.org> [ v4: sanity-check in the ACPI case too ] Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/apic.c | 31 +++++++++++++++++++++---------- 1 file changed, 21 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index e258bedce7c..1ee966f4ae9 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1456,7 +1456,6 @@ static int __init detect_init_APIC(void) } mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; - boot_cpu_physical_apicid = 0; return 0; } #else @@ -1570,6 +1569,8 @@ void __init early_init_lapic_mapping(void) */ void __init init_apic_mappings(void) { + unsigned int new_apicid; + if (x2apic_mode) { boot_cpu_physical_apicid = read_apic_id(); return; @@ -1586,21 +1587,31 @@ void __init init_apic_mappings(void) } else apic_phys = mp_lapic_addr; - set_fixmap_nocache(FIX_APIC_BASE, apic_phys); + /* lets check if we may NOP'ify apic operations */ + if (!cpu_has_apic) { + pr_info("APIC: disable apic facility\n"); + apic_disable(); + return; + } + + /* + * acpi lapic path already maps that address in + * acpi_register_lapic_address() + */ + if (!acpi_lapic) + set_fixmap_nocache(FIX_APIC_BASE, apic_phys); + apic_printk(APIC_VERBOSE, "mapped APIC to %08lx (%08lx)\n", APIC_BASE, apic_phys); - /* * Fetch the APIC ID of the BSP in case we have a * default configuration (or the MP table is broken). */ - if (boot_cpu_physical_apicid == -1U) - boot_cpu_physical_apicid = read_apic_id(); - - /* lets check if we may to NOP'ify apic operations */ - if (!cpu_has_apic) { - pr_info("APIC: disable apic facility\n"); - apic_disable(); + new_apicid = read_apic_id(); + if (boot_cpu_physical_apicid != new_apicid) { + boot_cpu_physical_apicid = new_apicid; + apic_version[new_apicid] = + GET_APIC_VERSION(apic_read(APIC_LVR)); } } -- cgit v1.2.3 From 97a52714658cd959a3cfa35c5b6f489859f0204b Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Fri, 8 May 2009 18:23:50 +0200 Subject: x86: display extended apic registers with print_local_APIC and cpu_debug code Both print_local_APIC (used when apic=debug kernel param is set) and cpu_debug code missed support for some extended APIC registers that I'd like to see. This adds support to show: - extended APIC feature register - extended APIC control register - extended LVT registers [ Impact: print more debug info ] Signed-off-by: Andreas Herrmann Cc: Jaswinder Singh Rajput Cc: Cyrill Gorcunov LKML-Reference: <20090508162350.GO29045@alberich.amd.com> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/apicdef.h | 8 ++++---- arch/x86/kernel/apic/apic.c | 2 +- arch/x86/kernel/apic/io_apic.c | 14 +++++++++++++- arch/x86/kernel/cpu/cpu_debug.c | 14 +++++++++++++- 4 files changed, 31 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/apicdef.h b/arch/x86/include/asm/apicdef.h index bc9514fb3b1..7ddb36ab933 100644 --- a/arch/x86/include/asm/apicdef.h +++ b/arch/x86/include/asm/apicdef.h @@ -22,6 +22,7 @@ # define APIC_INTEGRATED(x) (1) #endif #define APIC_XAPIC(x) ((x) >= 0x14) +#define APIC_EXT_SPACE(x) ((x) & 0x80000000) #define APIC_TASKPRI 0x80 #define APIC_TPRI_MASK 0xFFu #define APIC_ARBPRI 0x90 @@ -116,7 +117,9 @@ #define APIC_TDR_DIV_32 0x8 #define APIC_TDR_DIV_64 0x9 #define APIC_TDR_DIV_128 0xA -#define APIC_EILVT0 0x500 +#define APIC_EFEAT 0x400 +#define APIC_ECTRL 0x410 +#define APIC_EILVTn(n) (0x500 + 0x10 * n) #define APIC_EILVT_NR_AMD_K8 1 /* # of extended interrupts */ #define APIC_EILVT_NR_AMD_10H 4 #define APIC_EILVT_LVTOFF(x) (((x) >> 4) & 0xF) @@ -125,9 +128,6 @@ #define APIC_EILVT_MSG_NMI 0x4 #define APIC_EILVT_MSG_EXT 0x7 #define APIC_EILVT_MASKED (1 << 16) -#define APIC_EILVT1 0x510 -#define APIC_EILVT2 0x520 -#define APIC_EILVT3 0x530 #define APIC_BASE (fix_to_virt(FIX_APIC_BASE)) #define APIC_BASE_MSR 0x800 diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 1ee966f4ae9..0e6543fafb5 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -395,7 +395,7 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) static void setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask) { - unsigned long reg = (lvt_off << 4) + APIC_EILVT0; + unsigned long reg = (lvt_off << 4) + APIC_EILVTn(0); unsigned int v = (mask << 16) | (msg_type << 8) | vector; apic_write(reg, v); diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 2afe145d277..65b824c9c4f 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -1739,7 +1739,7 @@ __apicdebuginit(void) print_APIC_bitfield(int base) __apicdebuginit(void) print_local_APIC(void *dummy) { - unsigned int v, ver, maxlvt; + unsigned int i, v, ver, maxlvt; u64 icr; if (apic_verbosity == APIC_QUIET) @@ -1827,6 +1827,18 @@ __apicdebuginit(void) print_local_APIC(void *dummy) printk(KERN_DEBUG "... APIC TMCCT: %08x\n", v); v = apic_read(APIC_TDCR); printk(KERN_DEBUG "... APIC TDCR: %08x\n", v); + + if (boot_cpu_has(X86_FEATURE_EXTAPIC)) { + v = apic_read(APIC_EFEAT); + maxlvt = (v >> 16) & 0xff; + printk(KERN_DEBUG "... APIC EFEAT: %08x\n", v); + v = apic_read(APIC_ECTRL); + printk(KERN_DEBUG "... APIC ECTRL: %08x\n", v); + for (i = 0; i < maxlvt; i++) { + v = apic_read(APIC_EILVTn(i)); + printk(KERN_DEBUG "... APIC EILVT%d: %08x\n", i, v); + } + } printk("\n"); } diff --git a/arch/x86/kernel/cpu/cpu_debug.c b/arch/x86/kernel/cpu/cpu_debug.c index 46e29ab96c6..2fc4f6bb9ca 100644 --- a/arch/x86/kernel/cpu/cpu_debug.c +++ b/arch/x86/kernel/cpu/cpu_debug.c @@ -588,8 +588,20 @@ static void print_apic(void *arg) seq_printf(seq, " TMICT\t\t: %08x\n", apic_read(APIC_TMICT)); seq_printf(seq, " TMCCT\t\t: %08x\n", apic_read(APIC_TMCCT)); seq_printf(seq, " TDCR\t\t: %08x\n", apic_read(APIC_TDCR)); -#endif /* CONFIG_X86_LOCAL_APIC */ + if (boot_cpu_has(X86_FEATURE_EXTAPIC)) { + unsigned int i, v, maxeilvt; + + v = apic_read(APIC_EFEAT); + maxeilvt = (v >> 16) & 0xff; + seq_printf(seq, " EFEAT\t\t: %08x\n", v); + seq_printf(seq, " ECTRL\t\t: %08x\n", apic_read(APIC_ECTRL)); + for (i = 0; i < maxeilvt; i++) { + v = apic_read(APIC_EILVTn(i)); + seq_printf(seq, " EILVT%d\t\t: %08x\n", i, v); + } + } +#endif /* CONFIG_X86_LOCAL_APIC */ seq_printf(seq, "\n MSR\t:\n"); } -- cgit v1.2.3 From cec6be6d1069d697beb490bbb40a290d5ff554a2 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Mon, 11 May 2009 17:41:40 +0400 Subject: x86: apic: Fixmap apic address even if apic disabled In case if apic were disabled by boot option we still need read_apic operation. So fixmap a fake apic area if needed. [ Impact: fix boot crash ] Signed-off-by: Cyrill Gorcunov Cc: yinghai@kernel.org Cc: eswierk@aristanetworks.com LKML-Reference: <20090511134140.GH4624@lenovo> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/apic.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 0e6543fafb5..07cffc1214c 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1587,13 +1587,6 @@ void __init init_apic_mappings(void) } else apic_phys = mp_lapic_addr; - /* lets check if we may NOP'ify apic operations */ - if (!cpu_has_apic) { - pr_info("APIC: disable apic facility\n"); - apic_disable(); - return; - } - /* * acpi lapic path already maps that address in * acpi_register_lapic_address() @@ -1602,7 +1595,15 @@ void __init init_apic_mappings(void) set_fixmap_nocache(FIX_APIC_BASE, apic_phys); apic_printk(APIC_VERBOSE, "mapped APIC to %08lx (%08lx)\n", - APIC_BASE, apic_phys); + APIC_BASE, apic_phys); + + /* lets check if we may NOP'ify apic operations */ + if (!cpu_has_apic) { + pr_info("APIC: disable apic facility\n"); + apic_disable(); + return; + } + /* * Fetch the APIC ID of the BSP in case we have a * default configuration (or the MP table is broken). -- cgit v1.2.3 From 4797f6b021a3fa399942245d07a1feb30df81bb8 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 2 May 2009 10:40:57 -0700 Subject: x86: read apic ID in the !acpi_lapic case Ed found that on 32-bit, boot_cpu_physical_apicid is not read right, when the mptable is broken. Interestingly, actually three paths use/set it: 1. acpi: at that time that is already read from reg 2. mptable: only read from mptable 3. no madt, and no mptable, that use default apic id 0 for 64-bit, -1 for 32-bit so we could read the apic id for the 2/3 path. We trust the hardware register more than we trust a BIOS data structure (the mptable). We can also avoid the double set_fixmap() when acpi_lapic is used, and also need to move cpu_has_apic earlier and call apic_disable(). Also when need to update the apic id, we'd better read and set the apic version as well - so that quirks are applied precisely. v2: make path 3 with 64bit, use -1 as apic id, so could read it later. v3: fix whitespace problem pointed out by Ed Swierk v5: fix boot crash [ Impact: get correct apic id for bsp other than acpi path ] Reported-by: Ed Swierk Signed-off-by: Yinghai Lu Acked-by: Cyrill Gorcunov LKML-Reference: <49FC85A9.2070702@kernel.org> [ v4: sanity-check in the ACPI case too ] Signed-off-by: Ingo Molnar --- arch/x86/include/asm/smp.h | 2 +- arch/x86/kernel/apic/apic.c | 46 ++++++++++++++++++++---------------------- arch/x86/kernel/apic/io_apic.c | 5 +++++ 3 files changed, 28 insertions(+), 25 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h index 19e0d88b966..6a84ed166ae 100644 --- a/arch/x86/include/asm/smp.h +++ b/arch/x86/include/asm/smp.h @@ -180,7 +180,7 @@ extern int safe_smp_processor_id(void); static inline int logical_smp_processor_id(void) { /* we don't want to mark this access volatile - bad code generation */ - return GET_APIC_LOGICAL_ID(*(u32 *)(APIC_BASE + APIC_LDR)); + return GET_APIC_LOGICAL_ID(apic_read(APIC_LDR)); } #endif diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 07cffc1214c..b0fd26442c4 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -242,17 +242,24 @@ static int modern_apic(void) * bare function to substitute write operation * and it's _that_ fast :) */ -void native_apic_write_dummy(u32 reg, u32 v) +static void native_apic_write_dummy(u32 reg, u32 v) { WARN_ON_ONCE((cpu_has_apic || !disable_apic)); } +static u32 native_apic_read_dummy(u32 reg) +{ + WARN_ON_ONCE((cpu_has_apic || !disable_apic)); + return 0; +} + /* - * right after this call apic->write doesn't do anything + * right after this call apic->write/read doesn't do anything * note that there is no restore operation it works one way */ void apic_disable(void) { + apic->read = native_apic_read_dummy; apic->write = native_apic_write_dummy; } @@ -1576,32 +1583,23 @@ void __init init_apic_mappings(void) return; } - /* - * If no local APIC can be found then set up a fake all - * zeroes page to simulate the local APIC and another - * one for the IO-APIC. - */ + /* If no local APIC can be found return early */ if (!smp_found_config && detect_init_APIC()) { - apic_phys = (unsigned long) alloc_bootmem_pages(PAGE_SIZE); - apic_phys = __pa(apic_phys); - } else + /* lets NOP'ify apic operations */ + pr_info("APIC: disable apic facility\n"); + apic_disable(); + } else { apic_phys = mp_lapic_addr; - /* - * acpi lapic path already maps that address in - * acpi_register_lapic_address() - */ - if (!acpi_lapic) - set_fixmap_nocache(FIX_APIC_BASE, apic_phys); - - apic_printk(APIC_VERBOSE, "mapped APIC to %08lx (%08lx)\n", - APIC_BASE, apic_phys); + /* + * acpi lapic path already maps that address in + * acpi_register_lapic_address() + */ + if (!acpi_lapic) + set_fixmap_nocache(FIX_APIC_BASE, apic_phys); - /* lets check if we may NOP'ify apic operations */ - if (!cpu_has_apic) { - pr_info("APIC: disable apic facility\n"); - apic_disable(); - return; + apic_printk(APIC_VERBOSE, "mapped APIC to %08lx (%08lx)\n", + APIC_BASE, apic_phys); } /* diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 1f3d3669dae..74d2b480a20 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -1878,6 +1878,11 @@ __apicdebuginit(void) print_PIC(void) __apicdebuginit(int) print_all_ICs(void) { print_PIC(); + + /* don't print out if apic is not there */ + if (!cpu_has_apic || disable_apic) + return 0; + print_all_local_APICs(); print_IO_APIC(); -- cgit v1.2.3 From e5198075c67a22ec9a09565b1ce88d3d3f5ba855 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 15 May 2009 13:05:16 -0700 Subject: x86, apic: introduce io_apic_irq_attr according to Ingo, io_apic irq-setup related functions have too many parameters with a repetitive signature. So reduce related funcs to get less params by passing a pointer to a newly defined io_apic_irq_attr structure. v2: io_apic_irq ==> irq_attr triggering ==> trigger v3: add set_io_apic_irq_attr [ Impact: cleanup ] Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: Jesse Barnes Cc: Len Brown LKML-Reference: <4A08ACD3.2070401@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/hw_irq.h | 21 +++++++++++++++++++-- arch/x86/include/asm/io_apic.h | 5 +++-- arch/x86/kernel/acpi/boot.c | 22 +++++++++++---------- arch/x86/kernel/apic/io_apic.c | 43 ++++++++++++++++++++++++------------------ arch/x86/pci/irq.c | 16 +++++----------- 5 files changed, 64 insertions(+), 43 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h index 26a40ab7013..a7d14bbae11 100644 --- a/arch/x86/include/asm/hw_irq.h +++ b/arch/x86/include/asm/hw_irq.h @@ -63,9 +63,26 @@ extern unsigned long io_apic_irqs; extern void init_VISWS_APIC_irqs(void); extern void setup_IO_APIC(void); extern void disable_IO_APIC(void); + +struct io_apic_irq_attr { + int ioapic; + int ioapic_pin; + int trigger; + int polarity; +}; + +static inline void set_io_apic_irq_attr(struct io_apic_irq_attr *irq_attr, + int ioapic, int ioapic_pin, + int trigger, int polarity) +{ + irq_attr->ioapic = ioapic; + irq_attr->ioapic_pin = ioapic_pin; + irq_attr->trigger = trigger; + irq_attr->polarity = polarity; +} + extern int IO_APIC_get_PCI_irq_vector(int bus, int devfn, int pin, - int *ioapic, int *ioapic_pin, - int *trigger, int *polarity); + struct io_apic_irq_attr *irq_attr); extern void setup_ioapic_dest(void); extern void enable_IO_APIC(void); diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h index 6fd99f96eb0..daf866ed061 100644 --- a/arch/x86/include/asm/io_apic.h +++ b/arch/x86/include/asm/io_apic.h @@ -156,8 +156,9 @@ extern int io_apic_get_version(int ioapic); extern int io_apic_get_redir_entries(int ioapic); #endif /* CONFIG_ACPI */ -extern int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, - int irq, int edge_level, int active_high_low); +struct io_apic_irq_attr; +extern int io_apic_set_pci_routing(struct device *dev, int irq, + struct io_apic_irq_attr *irq_attr); extern int (*ioapic_renumber_irq)(int ioapic, int irq); extern void ioapic_init_mappings(void); diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index dcfbc3ab9e4..4af63dfb0f0 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -523,7 +523,7 @@ int acpi_gsi_to_irq(u32 gsi, unsigned int *irq) * success: return IRQ number (>=0) * failure: return < 0 */ -int acpi_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity) +int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity) { unsigned int irq; unsigned int plat_gsi = gsi; @@ -533,14 +533,14 @@ int acpi_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity) * Make sure all (legacy) PCI IRQs are set as level-triggered. */ if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) { - if (triggering == ACPI_LEVEL_SENSITIVE) + if (trigger == ACPI_LEVEL_SENSITIVE) eisa_set_level_irq(gsi); } #endif #ifdef CONFIG_X86_IO_APIC if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) { - plat_gsi = mp_register_gsi(dev, gsi, triggering, polarity); + plat_gsi = mp_register_gsi(dev, gsi, trigger, polarity); } #endif acpi_gsi_to_irq(plat_gsi, &irq); @@ -1156,7 +1156,7 @@ void __init mp_config_acpi_legacy_irqs(void) } } -static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int triggering, +static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int trigger, int polarity) { #ifdef CONFIG_X86_MPPARSE @@ -1181,7 +1181,7 @@ static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int triggering, /* print the entry should happen on mptable identically */ mp_irq.type = MP_INTSRC; mp_irq.irqtype = mp_INT; - mp_irq.irqflag = (triggering == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) | + mp_irq.irqflag = (trigger == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) | (polarity == ACPI_ACTIVE_HIGH ? 1 : 3); mp_irq.srcbus = number; mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3); @@ -1194,10 +1194,11 @@ static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int triggering, return 0; } -int mp_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity) +int mp_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity) { int ioapic; int ioapic_pin; + struct io_apic_irq_attr irq_attr; if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC) return gsi; @@ -1225,11 +1226,12 @@ int mp_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity) ioapic_pin); return gsi; } - mp_config_acpi_gsi(dev, gsi, triggering, polarity); + mp_config_acpi_gsi(dev, gsi, trigger, polarity); - io_apic_set_pci_routing(dev, ioapic, ioapic_pin, gsi, - triggering == ACPI_EDGE_SENSITIVE ? 0 : 1, - polarity == ACPI_ACTIVE_HIGH ? 0 : 1); + set_io_apic_irq_attr(&irq_attr, ioapic, ioapic_pin, + trigger == ACPI_EDGE_SENSITIVE ? 0 : 1, + polarity == ACPI_ACTIVE_HIGH ? 0 : 1); + io_apic_set_pci_routing(dev, gsi, &irq_attr); return gsi; } diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 74d2b480a20..ce1ac74baa7 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -1096,8 +1096,7 @@ static int pin_2_irq(int idx, int apic, int pin) * Not an __init, possibly needed by modules */ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin, - int *ioapic, int *ioapic_pin, - int *trigger, int *polarity) + struct io_apic_irq_attr *irq_attr) { int apic, i, best_guess = -1; @@ -1127,10 +1126,10 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin, continue; if (pin == (mp_irqs[i].srcbusirq & 3)) { - *ioapic = apic; - *ioapic_pin = mp_irqs[i].dstirq; - *trigger = irq_trigger(i); - *polarity = irq_polarity(i); + set_io_apic_irq_attr(irq_attr, apic, + mp_irqs[i].dstirq, + irq_trigger(i), + irq_polarity(i)); return irq; } /* @@ -1138,10 +1137,10 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin, * best-guess fuzzy result for broken mptables. */ if (best_guess < 0) { - *ioapic = apic; - *ioapic_pin = mp_irqs[i].dstirq; - *trigger = irq_trigger(i); - *polarity = irq_polarity(i); + set_io_apic_irq_attr(irq_attr, apic, + mp_irqs[i].dstirq, + irq_trigger(i), + irq_polarity(i)); best_guess = irq; } } @@ -3865,13 +3864,16 @@ int __init arch_probe_nr_irqs(void) } #endif -static int __io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq, - int triggering, int polarity) +static int __io_apic_set_pci_routing(struct device *dev, int irq, + struct io_apic_irq_attr *irq_attr) { struct irq_desc *desc; struct irq_cfg *cfg; int node; + int ioapic, pin; + int trigger, polarity; + ioapic = irq_attr->ioapic; if (!IO_APIC_IRQ(irq)) { apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n", ioapic); @@ -3889,6 +3891,10 @@ static int __io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, in return 0; } + pin = irq_attr->ioapic_pin; + trigger = irq_attr->trigger; + polarity = irq_attr->polarity; + /* * IRQs < 16 are already in the irq_2_pin[] map */ @@ -3897,20 +3903,22 @@ static int __io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, in add_pin_to_irq_node(cfg, node, ioapic, pin); } - setup_IO_APIC_irq(ioapic, pin, irq, desc, triggering, polarity); + setup_IO_APIC_irq(ioapic, pin, irq, desc, trigger, polarity); return 0; } -int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq, - int triggering, int polarity) +int io_apic_set_pci_routing(struct device *dev, int irq, + struct io_apic_irq_attr *irq_attr) { - + int ioapic, pin; /* * Avoid pin reprogramming. PRTs typically include entries * with redundant pin->gsi mappings (but unique PCI devices); * we only program the IOAPIC on the first. */ + ioapic = irq_attr->ioapic; + pin = irq_attr->ioapic_pin; if (test_bit(pin, mp_ioapic_routing[ioapic].pin_programmed)) { pr_debug("Pin %d-%d already programmed\n", mp_ioapics[ioapic].apicid, pin); @@ -3918,8 +3926,7 @@ int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq, } set_bit(pin, mp_ioapic_routing[ioapic].pin_programmed); - return __io_apic_set_pci_routing(dev, ioapic, pin, irq, - triggering, polarity); + return __io_apic_set_pci_routing(dev, irq, irq_attr); } /* -------------------------------------------------------------------------- diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c index 2f3e192615c..0696d506c4a 100644 --- a/arch/x86/pci/irq.c +++ b/arch/x86/pci/irq.c @@ -1200,14 +1200,11 @@ static int pirq_enable_irq(struct pci_dev *dev) #ifdef CONFIG_X86_IO_APIC struct pci_dev *temp_dev; int irq; - int ioapic = -1, ioapic_pin = -1; - int triggering, polarity; + struct io_apic_irq_attr irq_attr; irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, PCI_SLOT(dev->devfn), - pin - 1, - &ioapic, &ioapic_pin, - &triggering, &polarity); + pin - 1, &irq_attr); /* * Busses behind bridges are typically not listed in the MP-table. * In this case we have to look up the IRQ based on the parent bus, @@ -1221,9 +1218,7 @@ static int pirq_enable_irq(struct pci_dev *dev) pin = pci_swizzle_interrupt_pin(dev, pin); irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number, PCI_SLOT(bridge->devfn), - pin - 1, - &ioapic, &ioapic_pin, - &triggering, &polarity); + pin - 1, &irq_attr); if (irq >= 0) dev_warn(&dev->dev, "using bridge %s " "INT %c to get IRQ %d\n", @@ -1233,9 +1228,8 @@ static int pirq_enable_irq(struct pci_dev *dev) } dev = temp_dev; if (irq >= 0) { - io_apic_set_pci_routing(&dev->dev, ioapic, - ioapic_pin, irq, - triggering, polarity); + io_apic_set_pci_routing(&dev->dev, irq, + &irq_attr); dev->irq = irq; dev_info(&dev->dev, "PCI->APIC IRQ transform: " "INT %c -> IRQ %d\n", 'A' + pin - 1, irq); -- cgit v1.2.3 From 2759c3287de27266e06f1f4e82cbd2d65f6a044c Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 15 May 2009 13:05:16 -0700 Subject: x86: don't call read_apic_id if !cpu_has_apic should not call that if apic is disabled. [ Impact: fix crash on certain UP configs ] Signed-off-by: Yinghai Lu Cc: Cyrill Gorcunov LKML-Reference: <4A09CCBB.2000306@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/apic_flat_64.c | 2 +- arch/x86/kernel/cpu/amd.c | 2 +- arch/x86/kernel/cpu/common.c | 6 ++++++ arch/x86/kernel/cpu/intel.c | 6 +++--- 4 files changed, 11 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c index 744e6d8af27..d0c99abc26c 100644 --- a/arch/x86/kernel/apic/apic_flat_64.c +++ b/arch/x86/kernel/apic/apic_flat_64.c @@ -161,7 +161,7 @@ static int flat_apic_id_registered(void) static int flat_phys_pkg_id(int initial_apic_id, int index_msb) { - return hard_smp_processor_id() >> index_msb; + return initial_apic_id >> index_msb; } struct apic apic_flat = { diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 7e4a459daa6..728b3750a3e 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -272,7 +272,7 @@ static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c) #if defined(CONFIG_NUMA) && defined(CONFIG_X86_64) int cpu = smp_processor_id(); int node; - unsigned apicid = hard_smp_processor_id(); + unsigned apicid = cpu_has_apic ? hard_smp_processor_id() : c->apicid; node = c->phys_proc_id; if (apicid_to_node[apicid] != NUMA_NO_NODE) diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index c1caefc82e6..017c600e05a 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -761,6 +761,12 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c) if (this_cpu->c_identify) this_cpu->c_identify(c); + /* Clear/Set all flags overriden by options, after probe */ + for (i = 0; i < NCAPINTS; i++) { + c->x86_capability[i] &= ~cpu_caps_cleared[i]; + c->x86_capability[i] |= cpu_caps_set[i]; + } + #ifdef CONFIG_X86_64 c->apicid = apic->phys_pkg_id(c->initial_apicid, 0); #endif diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c index 7437fa133c0..daed39ba261 100644 --- a/arch/x86/kernel/cpu/intel.c +++ b/arch/x86/kernel/cpu/intel.c @@ -229,12 +229,12 @@ static void __cpuinit intel_workarounds(struct cpuinfo_x86 *c) } #endif -static void __cpuinit srat_detect_node(void) +static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c) { #if defined(CONFIG_NUMA) && defined(CONFIG_X86_64) unsigned node; int cpu = smp_processor_id(); - int apicid = hard_smp_processor_id(); + int apicid = cpu_has_apic ? hard_smp_processor_id() : c->apicid; /* Don't do the funky fallback heuristics the AMD version employs for now. */ @@ -400,7 +400,7 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c) } /* Work around errata */ - srat_detect_node(); + srat_detect_node(c); if (cpu_has(c, X86_FEATURE_VMX)) detect_vmx_virtcap(c); -- cgit v1.2.3 From 629e15d245f46bef9d26199b450f882f9437a8fe Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 15 May 2009 13:05:16 -0700 Subject: x86, irq: update_mptable needs pci_routeirq To get all device irq routing and to save them. This is basically an implicit pci=routeirq enablement if (and on if) the update_mptable boot option (which is off by default) has been specified. [ Impact: extend the update_mptable boot opion's scope ] Signed-off-by: Yinghai Lu Cc: Jesse Barnes LKML-Reference: <4A0DB7B4.4060702@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/kernel/mpparse.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index cd2a41a7c45..e6bf9d08e50 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include @@ -961,6 +962,9 @@ static int __initdata enable_update_mptable; static int __init update_mptable_setup(char *str) { enable_update_mptable = 1; +#ifdef CONFIG_PCI + pci_routeirq = 1; +#endif return 0; } early_param("update_mptable", update_mptable_setup); @@ -973,6 +977,9 @@ static int __initdata alloc_mptable; static int __init parse_alloc_mptable_opt(char *p) { enable_update_mptable = 1; +#ifdef CONFIG_PCI + pci_routeirq = 1; +#endif alloc_mptable = 1; if (!p) return 0; -- cgit v1.2.3 From f1bdb523880c7f6990e9e8e50b0fc972ca475e84 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 15 May 2009 13:05:16 -0700 Subject: x86, irq: don't call mp_config_acpi_gsi() if update_mptable is not enabled Len expressed concern that the update_mptable feature has side-effects on the ACPI code. Make it sure explicitly that the code only ever gets called if the (default disabled) update_mptable boot quirk option is disabled. [ Impact: isolate the update_mptable feature from ACPI code more ] Signed-off-by: Yinghai Lu Cc: Len Brown LKML-Reference: <4A0DC832.5090200@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/mpspec.h | 9 +++++++++ arch/x86/kernel/acpi/boot.c | 4 +++- arch/x86/kernel/mpparse.c | 2 +- 3 files changed, 13 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h index c34961a45ec..3dcbaaaa363 100644 --- a/arch/x86/include/asm/mpspec.h +++ b/arch/x86/include/asm/mpspec.h @@ -87,6 +87,15 @@ static inline int acpi_probe_gsi(void) } #endif /* CONFIG_ACPI */ +#ifdef CONFIG_X86_MPPARSE +extern int enable_update_mptable; +#else +static inline int enable_update_mptable(void) +{ + return 0; +} +#endif + #define PHYSID_ARRAY_SIZE BITS_TO_LONGS(MAX_APICS) struct physid_mask { diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 4af63dfb0f0..844e5e25213 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -1226,7 +1226,9 @@ int mp_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity) ioapic_pin); return gsi; } - mp_config_acpi_gsi(dev, gsi, trigger, polarity); + + if (enable_update_mptable) + mp_config_acpi_gsi(dev, gsi, trigger, polarity); set_io_apic_irq_attr(&irq_attr, ioapic, ioapic_pin, trigger == ACPI_EDGE_SENSITIVE ? 0 : 1, diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index e6bf9d08e50..651c93b2886 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -957,7 +957,7 @@ out: return 0; } -static int __initdata enable_update_mptable; +int enable_update_mptable; static int __init update_mptable_setup(char *str) { -- cgit v1.2.3 From 818bc814447a35350ae90a329133e474bf1a2bd7 Mon Sep 17 00:00:00 2001 From: Daniel Ribeiro Date: Sat, 2 May 2009 15:05:59 -0300 Subject: [ARM] pxa: save/restore PGSR on suspend/resume. Signed-off-by: Daniel Ribeiro Signed-off-by: Eric Miao --- arch/arm/mach-pxa/mfp-pxa2xx.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index 7ffb91d64c3..6ae50604170 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -322,6 +322,7 @@ static inline void pxa27x_mfp_init(void) {} #ifdef CONFIG_PM static unsigned long saved_gafr[2][4]; static unsigned long saved_gpdr[4]; +static unsigned long saved_pgsr[4]; static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state) { @@ -332,6 +333,7 @@ static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state) saved_gafr[0][i] = GAFR_L(i); saved_gafr[1][i] = GAFR_U(i); saved_gpdr[i] = GPDR(i * 32); + saved_pgsr[i] = PGSR(i); GPDR(i * 32) = gpdr_lpm[i]; } @@ -346,6 +348,7 @@ static int pxa2xx_mfp_resume(struct sys_device *d) GAFR_L(i) = saved_gafr[0][i]; GAFR_U(i) = saved_gafr[1][i]; GPDR(i * 32) = saved_gpdr[i]; + PGSR(i) = saved_pgsr[i]; } PSSR = PSSR_RDH | PSSR_PH; return 0; -- cgit v1.2.3 From 216e3b7abbd05c35d2d1a3f86629ade485351f0d Mon Sep 17 00:00:00 2001 From: Daniel Ribeiro Date: Tue, 5 May 2009 22:43:18 -0300 Subject: [ARM] pxa: allow gpio_reset drive high during normal work I want to reuse tosa/spitz gpio_reset code, but my board needs the reset gpio to be driven high during normal operation. Signed-off-by: Daniel Ribeiro Acked-by: Dmitry Eremin-Solenikov Signed-off-by: Eric Miao --- arch/arm/mach-pxa/include/mach/reset.h | 5 +++-- arch/arm/mach-pxa/reset.c | 4 ++-- arch/arm/mach-pxa/spitz.c | 2 +- arch/arm/mach-pxa/tosa.c | 2 +- 4 files changed, 7 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/include/mach/reset.h b/arch/arm/mach-pxa/include/mach/reset.h index 31e6a7b6ad8..b6c10556fbc 100644 --- a/arch/arm/mach-pxa/include/mach/reset.h +++ b/arch/arm/mach-pxa/include/mach/reset.h @@ -13,8 +13,9 @@ extern void clear_reset_status(unsigned int mask); /** * init_gpio_reset() - register GPIO as reset generator * @gpio: gpio nr - * @output: set gpio as out/low instead of input during normal work + * @output: set gpio as output instead of input during normal work + * @level: output level */ -extern int init_gpio_reset(int gpio, int output); +extern int init_gpio_reset(int gpio, int output, int level); #endif /* __ASM_ARCH_RESET_H */ diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c index df29d45fb4e..01e9d643394 100644 --- a/arch/arm/mach-pxa/reset.c +++ b/arch/arm/mach-pxa/reset.c @@ -20,7 +20,7 @@ static void do_hw_reset(void); static int reset_gpio = -1; -int init_gpio_reset(int gpio, int output) +int init_gpio_reset(int gpio, int output, int level) { int rc; @@ -31,7 +31,7 @@ int init_gpio_reset(int gpio, int output) } if (output) - rc = gpio_direction_output(gpio, 0); + rc = gpio_direction_output(gpio, level); else rc = gpio_direction_input(gpio); if (rc) { diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index c18e34acafc..cdacea09abf 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -731,7 +731,7 @@ static void spitz_restart(char mode, const char *cmd) static void __init common_init(void) { - init_gpio_reset(SPITZ_GPIO_ON_RESET, 1); + init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0); pm_power_off = spitz_poweroff; arm_pm_restart = spitz_restart; diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index afac5b6d3d7..a0bd46ef5d3 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -897,7 +897,7 @@ static void __init tosa_init(void) gpio_set_wake(MFP_PIN_GPIO1, 1); /* We can't pass to gpio-keys since it will drop the Reset altfunc */ - init_gpio_reset(TOSA_GPIO_ON_RESET, 0); + init_gpio_reset(TOSA_GPIO_ON_RESET, 0, 0); pm_power_off = tosa_poweroff; arm_pm_restart = tosa_restart; -- cgit v1.2.3 From 866bd435819df8d97767c407f8828a7a2ff971e6 Mon Sep 17 00:00:00 2001 From: Timothy Clacy Date: Thu, 7 May 2009 19:40:33 +0200 Subject: [ARM] pxa: enable GPIO receivers after configuring pins 'mach-pxa' platforms currently rely on a bootloader to setup GPIO pins and clear RDH (to enable inputs). A kernel loaded by a 'minimal' bootloader, that doesn't touch any pins, will not function correctly; inputs will remain disabled, even after the pins are configured. The following change fixes the issue and has been verified on Gumstix Verdex XL6P and a custom PXA270 platform. Signed-off-by: Timothy Clacy Signed-off-by: Eric Miao --- arch/arm/mach-pxa/mfp-pxa2xx.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index 6ae50604170..cf6b720c055 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -377,6 +377,9 @@ static int __init pxa2xx_mfp_init(void) if (cpu_is_pxa27x()) pxa27x_mfp_init(); + /* clear RDH bit to enable GPIO receivers after reset/sleep exit */ + PSSR = PSSR_RDH; + /* initialize gafr_run[], pgsr_lpm[] from existing values */ for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) gpdr_lpm[i] = GPDR(i * 32); -- cgit v1.2.3 From a81b38688f50f51123490d45d51f4a10e8dc1184 Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Fri, 15 May 2009 10:11:22 +0400 Subject: [ARM] pxa/spitz: provide spitz_ohci_exit() that unregisters USB_HOST GPIO Currently spitz_ohci_init() that requests GPIO doesn't have corresponding spitz_ohci_exit() which will gpio_free(). This causes minor problems e.g. during resume when the OHCI device can't be resumed. Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Eric Miao --- arch/arm/mach-pxa/spitz.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index cdacea09abf..5a45fe340a1 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -531,9 +531,15 @@ static int spitz_ohci_init(struct device *dev) return gpio_direction_output(SPITZ_GPIO_USB_HOST, 1); } +static void spitz_ohci_exit(struct device *dev) +{ + gpio_free(SPITZ_GPIO_USB_HOST); +} + static struct pxaohci_platform_data spitz_ohci_platform_data = { .port_mode = PMM_NPS_MODE, .init = spitz_ohci_init, + .exit = spitz_ohci_exit, .flags = ENABLE_PORT_ALL | NO_OC_PROTECTION, .power_budget = 150, }; -- cgit v1.2.3 From 4c6f18fc81565967da20f2d4a3922cdba33f8e2b Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 18 May 2009 10:23:28 -0700 Subject: x86, io-apic: Don't mark pin_programmed early Peter bisected that: | commit b9c61b70075c87a8612624736faf4a2de5b1ed30 | Date: Wed May 6 10:10:06 2009 -0700 | | x86/pci: update pirq_enable_irq() to setup io apic routing | | So we can set io apic routing only when enabling the device irq. wrecked his opteron box, ata1 interrupts fail to get through. ata1 is using irq 11: [ 1.451839] sata_svw 0000:01:0e.0: version 2.3 [ 1.456333] sata_svw 0000:01:0e.0: PCI INT A -> GSI 11 (level, low) -> IRQ 11 [ 1.463639] scsi0 : sata_svw [ 1.466949] scsi1 : sata_svw [ 1.470022] scsi2 : sata_svw [ 1.473090] scsi3 : sata_svw [ 1.476112] ata1: SATA max UDMA/133 mmio m8192@0xff3fe000 port 0xff3fe000 irq 11 [ 1.483490] ata2: SATA max UDMA/133 mmio m8192@0xff3fe000 port 0xff3fe100 irq 11 [ 1.490870] ata3: SATA max UDMA/133 mmio m8192@0xff3fe000 port 0xff3fe200 irq 11 [ 1.498247] ata4: SATA max UDMA/133 mmio m8192@0xff3fe000 port 0xff3fe300 irq 11 that pin is overlapped with pin with legacy ones. We should not set bits in pin_programmed here, so that those bit could be set later via io_apic_set_pci_routing(). [ Impact: fix boot hang on certain systems ] Reported-by: Peter Zijlstra Signed-off-by: Yinghai Lu Tested-by: Peter Zijlstra Cc: Jack Steiner LKML-Reference: <4A119990.9020606@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/io_apic.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index ce1ac74baa7..ac7f3b6ad58 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -1537,7 +1537,10 @@ static void __init setup_IO_APIC_irqs(void) } cfg = desc->chip_data; add_pin_to_irq_node(cfg, node, apic_id, pin); - set_bit(pin, mp_ioapic_routing[apic_id].pin_programmed); + /* + * don't mark it in pin_programmed, so later acpi could + * set it correctly when irq < 16 + */ setup_IO_APIC_irq(apic_id, pin, irq, desc, irq_trigger(idx), irq_polarity(idx)); } -- cgit v1.2.3 From ff71338ed31398384b2e5992623d52f9aaba1da1 Mon Sep 17 00:00:00 2001 From: Daniel Ribeiro Date: Fri, 15 May 2009 06:33:50 -0300 Subject: [ARM] pxa/ezx: fix pin configuration for low power mode Fix LPM configuration on ezx.c Signed-off-by: Daniel Ribeiro Signed-off-by: Eric Miao --- arch/arm/mach-pxa/ezx.c | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index 92ba16e1b6f..7db966dc29c 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -111,9 +111,9 @@ static unsigned long ezx_pin_config[] __initdata = { GPIO25_SSP1_TXD, GPIO26_SSP1_RXD, GPIO24_GPIO, /* pcap chip select */ - GPIO1_GPIO, /* pcap interrupt */ - GPIO4_GPIO, /* WDI_AP */ - GPIO55_GPIO, /* SYS_RESTART */ + GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, /* pcap interrupt */ + GPIO4_GPIO | MFP_LPM_DRIVE_HIGH, /* WDI_AP */ + GPIO55_GPIO | MFP_LPM_DRIVE_HIGH, /* SYS_RESTART */ /* MMC */ GPIO32_MMC_CLK, @@ -144,20 +144,20 @@ static unsigned long ezx_pin_config[] __initdata = { #if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_E680) static unsigned long gen1_pin_config[] __initdata = { /* flip / lockswitch */ - GPIO12_GPIO, + GPIO12_GPIO | WAKEUP_ON_EDGE_BOTH, /* bluetooth (bcm2035) */ - GPIO14_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */ + GPIO14_GPIO | WAKEUP_ON_EDGE_RISE, /* HOSTWAKE */ GPIO48_GPIO, /* RESET */ GPIO28_GPIO, /* WAKEUP */ /* Neptune handshake */ - GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* BP_RDY */ - GPIO57_GPIO, /* AP_RDY */ - GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI */ - GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI2 */ - GPIO82_GPIO, /* RESET */ - GPIO99_GPIO, /* TC_MM_EN */ + GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* BP_RDY */ + GPIO57_GPIO | MFP_LPM_DRIVE_HIGH, /* AP_RDY */ + GPIO13_GPIO | WAKEUP_ON_EDGE_BOTH, /* WDI */ + GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH, /* WDI2 */ + GPIO82_GPIO | MFP_LPM_DRIVE_HIGH, /* RESET */ + GPIO99_GPIO | MFP_LPM_DRIVE_HIGH, /* TC_MM_EN */ /* sound */ GPIO52_SSP3_SCLK, @@ -199,21 +199,21 @@ static unsigned long gen1_pin_config[] __initdata = { defined(CONFIG_MACH_EZX_E2) || defined(CONFIG_MACH_EZX_E6) static unsigned long gen2_pin_config[] __initdata = { /* flip / lockswitch */ - GPIO15_GPIO, + GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH, /* EOC */ - GPIO10_GPIO, + GPIO10_GPIO | WAKEUP_ON_EDGE_RISE, /* bluetooth (bcm2045) */ - GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */ + GPIO13_GPIO | WAKEUP_ON_EDGE_RISE, /* HOSTWAKE */ GPIO37_GPIO, /* RESET */ GPIO57_GPIO, /* WAKEUP */ /* Neptune handshake */ - GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* BP_RDY */ - GPIO96_GPIO, /* AP_RDY */ - GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI */ - GPIO116_GPIO, /* RESET */ + GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* BP_RDY */ + GPIO96_GPIO | MFP_LPM_DRIVE_HIGH, /* AP_RDY */ + GPIO3_GPIO | WAKEUP_ON_EDGE_FALL, /* WDI */ + GPIO116_GPIO | MFP_LPM_DRIVE_HIGH, /* RESET */ GPIO41_GPIO, /* BP_FLASH */ /* sound */ -- cgit v1.2.3 From 385aa9e7012d35b017981e67b3464aef4e1e7108 Mon Sep 17 00:00:00 2001 From: Thomas Reitmayr Date: Tue, 19 May 2009 19:35:26 +0200 Subject: [ARM] Kirkwood: Correct MPP for SATA activity/presence LEDs of QNAP TS-119/TS-219. For the QNAP TS-119 and TS-219 the wrong MPPs were used for the SATA activity/presence LEDs. The new settings make these LEDs work as expected. Signed-off-by: Thomas Reitmayr Tested-by: Martin Michlmayr Signed-off-by: Nicolas Pitre --- arch/arm/mach-kirkwood/ts219-setup.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c index dda5743cf3e..01aa213c0a6 100644 --- a/arch/arm/mach-kirkwood/ts219-setup.c +++ b/arch/arm/mach-kirkwood/ts219-setup.c @@ -142,6 +142,8 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = { MPP1_SPI_MOSI, MPP2_SPI_SCK, MPP3_SPI_MISO, + MPP4_SATA1_ACTn, + MPP5_SATA0_ACTn, MPP8_TW_SDA, MPP9_TW_SCK, MPP10_UART0_TXD, @@ -150,10 +152,6 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = { MPP14_UART1_RXD, /* PIC controller */ MPP15_GPIO, /* USB Copy button */ MPP16_GPIO, /* Reset button */ - MPP20_SATA1_ACTn, - MPP21_SATA0_ACTn, - MPP22_SATA1_PRESENTn, - MPP23_SATA0_PRESENTn, 0 }; -- cgit v1.2.3 From 85bc26211c6a2c6e82c2403697f8ce44e9587215 Mon Sep 17 00:00:00 2001 From: Martin Michlmayr Date: Tue, 19 May 2009 12:30:52 +0200 Subject: [ARM] Orion: Remove explicit name for platform device resources Remove explicit names from platform device resources since they will automatically be named after the platform device they're associated with. Signed-off-by: Martin Michlmayr Acked-by: Russell King Signed-off-by: Nicolas Pitre --- arch/arm/mach-kirkwood/common.c | 2 -- arch/arm/mach-mv78xx0/common.c | 4 ---- arch/arm/mach-orion5x/common.c | 2 -- 3 files changed, 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index eeb00240d78..3fab82a4c8f 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -386,12 +386,10 @@ static struct mv64xxx_i2c_pdata kirkwood_i2c_pdata = { static struct resource kirkwood_i2c_resources[] = { { - .name = "i2c", .start = I2C_PHYS_BASE, .end = I2C_PHYS_BASE + 0x1f, .flags = IORESOURCE_MEM, }, { - .name = "i2c", .start = IRQ_KIRKWOOD_TWSI, .end = IRQ_KIRKWOOD_TWSI, .flags = IORESOURCE_IRQ, diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index 9ba595083da..0d88eea6a09 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -532,12 +532,10 @@ static struct mv64xxx_i2c_pdata mv78xx0_i2c_0_pdata = { static struct resource mv78xx0_i2c_0_resources[] = { { - .name = "i2c 0 base", .start = I2C_0_PHYS_BASE, .end = I2C_0_PHYS_BASE + 0x1f, .flags = IORESOURCE_MEM, }, { - .name = "i2c 0 irq", .start = IRQ_MV78XX0_I2C_0, .end = IRQ_MV78XX0_I2C_0, .flags = IORESOURCE_IRQ, @@ -567,12 +565,10 @@ static struct mv64xxx_i2c_pdata mv78xx0_i2c_1_pdata = { static struct resource mv78xx0_i2c_1_resources[] = { { - .name = "i2c 1 base", .start = I2C_1_PHYS_BASE, .end = I2C_1_PHYS_BASE + 0x1f, .flags = IORESOURCE_MEM, }, { - .name = "i2c 1 irq", .start = IRQ_MV78XX0_I2C_1, .end = IRQ_MV78XX0_I2C_1, .flags = IORESOURCE_IRQ, diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 6af99ddabdf..a51fb9dd65a 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -248,12 +248,10 @@ static struct mv64xxx_i2c_pdata orion5x_i2c_pdata = { static struct resource orion5x_i2c_resources[] = { { - .name = "i2c base", .start = I2C_PHYS_BASE, .end = I2C_PHYS_BASE + 0x1f, .flags = IORESOURCE_MEM, }, { - .name = "i2c irq", .start = IRQ_ORION5X_I2C, .end = IRQ_ORION5X_I2C, .flags = IORESOURCE_IRQ, -- cgit v1.2.3 From 0e1b74df992c1ef92213ab26f952befda2087f59 Mon Sep 17 00:00:00 2001 From: Mingwei Wang Date: Wed, 20 May 2009 16:49:57 +0800 Subject: [ARM] pxa: fix the incorrectly defined drive strength macros for pxa{168,910} Signed-off-by: Mingwei Wang Signed-off-by: Eric Miao --- arch/arm/mach-mmp/include/mach/mfp-pxa168.h | 5 +++++ arch/arm/mach-mmp/include/mach/mfp-pxa910.h | 5 +++++ arch/arm/mach-mmp/include/mach/mfp.h | 9 +++------ 3 files changed, 13 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h index d0bdb6e3682..2e914649b9e 100644 --- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h +++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h @@ -3,6 +3,11 @@ #include +#define MFP_DRIVE_VERY_SLOW (0x0 << 13) +#define MFP_DRIVE_SLOW (0x1 << 13) +#define MFP_DRIVE_MEDIUM (0x2 << 13) +#define MFP_DRIVE_FAST (0x3 << 13) + /* GPIO */ #define GPIO0_GPIO MFP_CFG(GPIO0, AF5) #define GPIO1_GPIO MFP_CFG(GPIO1, AF5) diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h index 48a1cbc7c56..d97de36c50a 100644 --- a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h +++ b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h @@ -3,6 +3,11 @@ #include +#define MFP_DRIVE_VERY_SLOW (0x0 << 13) +#define MFP_DRIVE_SLOW (0x2 << 13) +#define MFP_DRIVE_MEDIUM (0x4 << 13) +#define MFP_DRIVE_FAST (0x8 << 13) + /* UART2 */ #define GPIO47_UART2_RXD MFP_CFG(GPIO47, AF6) #define GPIO48_UART2_TXD MFP_CFG(GPIO48, AF6) diff --git a/arch/arm/mach-mmp/include/mach/mfp.h b/arch/arm/mach-mmp/include/mach/mfp.h index 277ea4cd0f9..62e510e80a5 100644 --- a/arch/arm/mach-mmp/include/mach/mfp.h +++ b/arch/arm/mach-mmp/include/mach/mfp.h @@ -12,16 +12,13 @@ * possible, we make the following compromise: * * 1. SLEEP_OE_N will always be programmed to '1' (by MFP_LPM_FLOAT) - * 2. DRIVE strength definitions redefined to include the reserved bit10 + * 2. DRIVE strength definitions redefined to include the reserved bit + * - the reserved bit differs between pxa168 and pxa910, and the + * MFP_DRIVE_* macros are individually defined in mfp-pxa{168,910}.h * 3. Override MFP_CFG() and MFP_CFG_DRV() * 4. Drop the use of MFP_CFG_LPM() and MFP_CFG_X() */ -#define MFP_DRIVE_VERY_SLOW (0x0 << 13) -#define MFP_DRIVE_SLOW (0x2 << 13) -#define MFP_DRIVE_MEDIUM (0x4 << 13) -#define MFP_DRIVE_FAST (0x8 << 13) - #undef MFP_CFG #undef MFP_CFG_DRV #undef MFP_CFG_LPM -- cgit v1.2.3 From f5c81a327015844eb91087dd102648b5d984f33c Mon Sep 17 00:00:00 2001 From: Coly Li Date: Thu, 23 Apr 2009 03:04:45 +0800 Subject: [ARM] pxa: add parameter to clksrc_read() for pxa168/910 This patch modifies parameter of clksrc_read() from 'void' to 'struct clocksource *cs', which fixes compile warning for incompatible parameter type. Signed-off-by: Coly Li Cc: Thomas Gleixner Signed-off-by: Eric Miao --- arch/arm/mach-mmp/time.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c index b03a6eda741..a8400bb891e 100644 --- a/arch/arm/mach-mmp/time.c +++ b/arch/arm/mach-mmp/time.c @@ -136,7 +136,7 @@ static struct clock_event_device ckevt = { .set_mode = timer_set_mode, }; -static cycle_t clksrc_read(void) +static cycle_t clksrc_read(struct clocksource *cs) { return timer_read(); } -- cgit v1.2.3 From 6ec04f434d29aed33608e0ca4d8b100190e71e96 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 22 May 2009 01:39:10 +0200 Subject: [ARM] pxa/palm: fix PalmLD/T5/TX AC97 MFP Signed-off-by: Marek Vasut Signed-off-by: Eric Miao --- arch/arm/mach-pxa/palmld.c | 2 ++ arch/arm/mach-pxa/palmt5.c | 1 + arch/arm/mach-pxa/palmtx.c | 1 + 3 files changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index 1cec1806f00..471a853e548 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -62,6 +62,8 @@ static unsigned long palmld_pin_config[] __initdata = { GPIO29_AC97_SDATA_IN_0, GPIO30_AC97_SDATA_OUT, GPIO31_AC97_SYNC, + GPIO89_AC97_SYSCLK, + GPIO95_AC97_nRESET, /* IrDA */ GPIO108_GPIO, /* ir disable */ diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index 30662363907..05bf979b78a 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -64,6 +64,7 @@ static unsigned long palmt5_pin_config[] __initdata = { GPIO29_AC97_SDATA_IN_0, GPIO30_AC97_SDATA_OUT, GPIO31_AC97_SYNC, + GPIO89_AC97_SYSCLK, GPIO95_AC97_nRESET, /* IrDA */ diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index e2d44b1a8a9..e99a893c58a 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -65,6 +65,7 @@ static unsigned long palmtx_pin_config[] __initdata = { GPIO29_AC97_SDATA_IN_0, GPIO30_AC97_SDATA_OUT, GPIO31_AC97_SYNC, + GPIO89_AC97_SYSCLK, GPIO95_AC97_nRESET, /* IrDA */ -- cgit v1.2.3 From a49a018a6ea6d73742a81d673fe5ec4a7d2137b3 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Fri, 22 May 2009 16:53:40 -0400 Subject: [ARM] add coherent DMA mask for mv643xx_eth Since commit eb0519b5a1cf, mv643xx_eth is non functional on ARM because the platform device declaration does not include any coherent DMA mask and coherent memory allocations fail. Signed-off-by: Nicolas Pitre --- arch/arm/mach-kirkwood/common.c | 6 ++++++ arch/arm/mach-loki/common.c | 6 ++++++ arch/arm/mach-mv78xx0/common.c | 12 ++++++++++++ arch/arm/mach-orion5x/common.c | 3 +++ 4 files changed, 27 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 3fab82a4c8f..be1ca28fed3 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -144,6 +144,9 @@ static struct platform_device kirkwood_ge00 = { .id = 0, .num_resources = 1, .resource = kirkwood_ge00_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data) @@ -202,6 +205,9 @@ static struct platform_device kirkwood_ge01 = { .id = 1, .num_resources = 1, .resource = kirkwood_ge01_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data) diff --git a/arch/arm/mach-loki/common.c b/arch/arm/mach-loki/common.c index c0d2d9d12e7..818f19d7ab1 100644 --- a/arch/arm/mach-loki/common.c +++ b/arch/arm/mach-loki/common.c @@ -82,6 +82,9 @@ static struct platform_device loki_ge0 = { .id = 0, .num_resources = 1, .resource = loki_ge0_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init loki_ge0_init(struct mv643xx_eth_platform_data *eth_data) @@ -136,6 +139,9 @@ static struct platform_device loki_ge1 = { .id = 1, .num_resources = 1, .resource = loki_ge1_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init loki_ge1_init(struct mv643xx_eth_platform_data *eth_data) diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index 0d88eea6a09..1b22e4af879 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -321,6 +321,9 @@ static struct platform_device mv78xx0_ge00 = { .id = 0, .num_resources = 1, .resource = mv78xx0_ge00_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data) @@ -375,6 +378,9 @@ static struct platform_device mv78xx0_ge01 = { .id = 1, .num_resources = 1, .resource = mv78xx0_ge01_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data) @@ -429,6 +435,9 @@ static struct platform_device mv78xx0_ge10 = { .id = 2, .num_resources = 1, .resource = mv78xx0_ge10_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data) @@ -496,6 +505,9 @@ static struct platform_device mv78xx0_ge11 = { .id = 3, .num_resources = 1, .resource = mv78xx0_ge11_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data) diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index a51fb9dd65a..b1c7778d9f9 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -188,6 +188,9 @@ static struct platform_device orion5x_eth = { .id = 0, .num_resources = 1, .resource = orion5x_eth_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data) -- cgit v1.2.3 From 14f0aa359365e8a93a77b71e3b840274b9b4dcb1 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 23 May 2009 11:36:20 +0100 Subject: [ARM] disable NX support for OABI-supporting kernels Our signal syscall restart handling for these kernels still uses the userspace stack to build code for restarting the syscall. Unfortunately, fixing this is non-trivial, and so for the time being, we resolve the problem by disabling NX support. Signed-off-by: Russell King --- arch/arm/kernel/elf.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm/kernel/elf.c b/arch/arm/kernel/elf.c index d4a0da1e48f..950391f194c 100644 --- a/arch/arm/kernel/elf.c +++ b/arch/arm/kernel/elf.c @@ -78,6 +78,15 @@ int arm_elf_read_implies_exec(const struct elf32_hdr *x, int executable_stack) return 1; if (cpu_architecture() < CPU_ARCH_ARMv6) return 1; +#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT) + /* + * If we have support for OABI programs, we can never allow NX + * support - our signal syscall restart mechanism relies upon + * being able to execute code placed on the user stack. + */ + return 1; +#else return 0; +#endif } EXPORT_SYMBOL(arm_elf_read_implies_exec); -- cgit v1.2.3 From abfe0af9813153bae8c85d9bac966bafcb8ddab1 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 20 May 2009 00:37:40 -0700 Subject: x86: enable_update_mptable should be a macro instead of declaring one variant as an inline function... because other case is a variable Signed-off-by: Yinghai Lu LKML-Reference: <4A13B344.7030307@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/mpspec.h | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h index 3dcbaaaa363..e2a1bb6d71e 100644 --- a/arch/x86/include/asm/mpspec.h +++ b/arch/x86/include/asm/mpspec.h @@ -61,9 +61,11 @@ extern void get_smp_config(void); #ifdef CONFIG_X86_MPPARSE extern void find_smp_config(void); extern void early_reserve_e820_mpc_new(void); +extern int enable_update_mptable; #else static inline void find_smp_config(void) { } static inline void early_reserve_e820_mpc_new(void) { } +#define enable_update_mptable 0 #endif void __cpuinit generic_processor_info(int apicid, int version); @@ -87,15 +89,6 @@ static inline int acpi_probe_gsi(void) } #endif /* CONFIG_ACPI */ -#ifdef CONFIG_X86_MPPARSE -extern int enable_update_mptable; -#else -static inline int enable_update_mptable(void) -{ - return 0; -} -#endif - #define PHYSID_ARRAY_SIZE BITS_TO_LONGS(MAX_APICS) struct physid_mask { -- cgit v1.2.3 From 67a433ce278b98f47272726a22537fab7fd99de9 Mon Sep 17 00:00:00 2001 From: Paulius Zaleckas Date: Thu, 28 May 2009 16:42:25 +0300 Subject: Gemini: Fix SRAM/ROM location after memory swap Signed-off-by: Paulius Zaleckas --- arch/arm/mach-gemini/include/mach/hardware.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-gemini/include/mach/hardware.h b/arch/arm/mach-gemini/include/mach/hardware.h index de6752674c0..213a4fcfeb1 100644 --- a/arch/arm/mach-gemini/include/mach/hardware.h +++ b/arch/arm/mach-gemini/include/mach/hardware.h @@ -15,10 +15,9 @@ /* * Memory Map definitions */ -/* FIXME: Does it really swap SRAM like this? */ #ifdef CONFIG_GEMINI_MEM_SWAP # define GEMINI_DRAM_BASE 0x00000000 -# define GEMINI_SRAM_BASE 0x20000000 +# define GEMINI_SRAM_BASE 0x70000000 #else # define GEMINI_SRAM_BASE 0x00000000 # define GEMINI_DRAM_BASE 0x10000000 -- cgit v1.2.3 From bac4e960b5ce2453d862beaf20e59aa68af3b43a Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 25 May 2009 20:58:00 +0100 Subject: [ARM] barriers: improve xchg, bitops and atomic SMP barriers Mathieu Desnoyers pointed out that the ARM barriers were lacking: - cmpxchg, xchg and atomic add return need memory barriers on architectures which can reorder the relative order in which memory read/writes can be seen between CPUs, which seems to include recent ARM architectures. Those barriers are currently missing on ARM. - test_and_xxx_bit were missing SMP barriers. So put these barriers in. Provide separate atomic_add/atomic_sub operations which do not require barriers. Reported-Reviewed-and-Acked-by: Mathieu Desnoyers Signed-off-by: Russell King --- arch/arm/include/asm/assembler.h | 13 +++++++++ arch/arm/include/asm/atomic.h | 61 ++++++++++++++++++++++++++++++++++------ arch/arm/include/asm/system.h | 3 ++ arch/arm/kernel/entry-armv.S | 5 +--- arch/arm/lib/bitops.h | 2 ++ 5 files changed, 71 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 6116e4893c0..15f8a092b70 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -114,3 +114,16 @@ .align 3; \ .long 9999b,9001f; \ .previous + +/* + * SMP data memory barrier + */ + .macro smp_dmb +#ifdef CONFIG_SMP +#if __LINUX_ARM_ARCH__ >= 7 + dmb +#elif __LINUX_ARM_ARCH__ == 6 + mcr p15, 0, r0, c7, c10, 5 @ dmb +#endif +#endif + .endm diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h index ee99723b3a6..16b52f39798 100644 --- a/arch/arm/include/asm/atomic.h +++ b/arch/arm/include/asm/atomic.h @@ -44,11 +44,29 @@ static inline void atomic_set(atomic_t *v, int i) : "cc"); } +static inline void atomic_add(int i, atomic_t *v) +{ + unsigned long tmp; + int result; + + __asm__ __volatile__("@ atomic_add\n" +"1: ldrex %0, [%2]\n" +" add %0, %0, %3\n" +" strex %1, %0, [%2]\n" +" teq %1, #0\n" +" bne 1b" + : "=&r" (result), "=&r" (tmp) + : "r" (&v->counter), "Ir" (i) + : "cc"); +} + static inline int atomic_add_return(int i, atomic_t *v) { unsigned long tmp; int result; + smp_mb(); + __asm__ __volatile__("@ atomic_add_return\n" "1: ldrex %0, [%2]\n" " add %0, %0, %3\n" @@ -59,14 +77,34 @@ static inline int atomic_add_return(int i, atomic_t *v) : "r" (&v->counter), "Ir" (i) : "cc"); + smp_mb(); + return result; } +static inline void atomic_sub(int i, atomic_t *v) +{ + unsigned long tmp; + int result; + + __asm__ __volatile__("@ atomic_sub\n" +"1: ldrex %0, [%2]\n" +" sub %0, %0, %3\n" +" strex %1, %0, [%2]\n" +" teq %1, #0\n" +" bne 1b" + : "=&r" (result), "=&r" (tmp) + : "r" (&v->counter), "Ir" (i) + : "cc"); +} + static inline int atomic_sub_return(int i, atomic_t *v) { unsigned long tmp; int result; + smp_mb(); + __asm__ __volatile__("@ atomic_sub_return\n" "1: ldrex %0, [%2]\n" " sub %0, %0, %3\n" @@ -77,6 +115,8 @@ static inline int atomic_sub_return(int i, atomic_t *v) : "r" (&v->counter), "Ir" (i) : "cc"); + smp_mb(); + return result; } @@ -84,6 +124,8 @@ static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new) { unsigned long oldval, res; + smp_mb(); + do { __asm__ __volatile__("@ atomic_cmpxchg\n" "ldrex %1, [%2]\n" @@ -95,6 +137,8 @@ static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new) : "cc"); } while (res); + smp_mb(); + return oldval; } @@ -135,6 +179,7 @@ static inline int atomic_add_return(int i, atomic_t *v) return val; } +#define atomic_add(i, v) (void) atomic_add_return(i, v) static inline int atomic_sub_return(int i, atomic_t *v) { @@ -148,6 +193,7 @@ static inline int atomic_sub_return(int i, atomic_t *v) return val; } +#define atomic_sub(i, v) (void) atomic_sub_return(i, v) static inline int atomic_cmpxchg(atomic_t *v, int old, int new) { @@ -187,10 +233,8 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u) } #define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) -#define atomic_add(i, v) (void) atomic_add_return(i, v) -#define atomic_inc(v) (void) atomic_add_return(1, v) -#define atomic_sub(i, v) (void) atomic_sub_return(i, v) -#define atomic_dec(v) (void) atomic_sub_return(1, v) +#define atomic_inc(v) atomic_add(1, v) +#define atomic_dec(v) atomic_sub(1, v) #define atomic_inc_and_test(v) (atomic_add_return(1, v) == 0) #define atomic_dec_and_test(v) (atomic_sub_return(1, v) == 0) @@ -200,11 +244,10 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u) #define atomic_add_negative(i,v) (atomic_add_return(i, v) < 0) -/* Atomic operations are already serializing on ARM */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() +#define smp_mb__before_atomic_dec() smp_mb() +#define smp_mb__after_atomic_dec() smp_mb() +#define smp_mb__before_atomic_inc() smp_mb() +#define smp_mb__after_atomic_inc() smp_mb() #include #endif diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index bd4dc8ed53d..7fce8f3b391 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -248,6 +248,8 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size unsigned int tmp; #endif + smp_mb(); + switch (size) { #if __LINUX_ARM_ARCH__ >= 6 case 1: @@ -307,6 +309,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size __bad_xchg(ptr, size), ret = 0; break; } + smp_mb(); return ret; } diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index d662a2f1fd8..83b1da6b7ba 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -815,10 +815,7 @@ __kuser_helper_start: */ __kuser_memory_barrier: @ 0xffff0fa0 - -#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_SMP) - mcr p15, 0, r0, c7, c10, 5 @ dmb -#endif + smp_dmb usr_ret lr .align 5 diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h index 2e787d40d59..c7f2627385e 100644 --- a/arch/arm/lib/bitops.h +++ b/arch/arm/lib/bitops.h @@ -18,12 +18,14 @@ mov r2, #1 add r1, r1, r0, lsr #3 @ Get byte offset mov r3, r2, lsl r3 @ create mask + smp_dmb 1: ldrexb r2, [r1] ands r0, r2, r3 @ save old value of bit \instr r2, r2, r3 @ toggle bit strexb ip, r2, [r1] cmp ip, #0 bne 1b + smp_dmb cmp r0, #0 movne r0, #1 2: mov pc, lr -- cgit v1.2.3 From ecd322c9b3e4ac70f9f108badde3eb6b99c7993d Mon Sep 17 00:00:00 2001 From: Mathieu Desnoyers Date: Thu, 28 May 2009 16:07:39 -0400 Subject: [ARM] Add cmpxchg support for ARMv6+ systems (v5) Add cmpxchg/cmpxchg64 support for ARMv6K and ARMv7 systems (original patch from Catalin Marinas ) The cmpxchg and cmpxchg64 functions can be implemented using the LDREX*/STREX* instructions. Since operand lengths other than 32bit are required, the full implementations are only available if the ARMv6K extensions are present (for the LDREXB, LDREXH and LDREXD instructions). For ARMv6, only 32-bits cmpxchg is available. Mathieu : Make cmpxchg_local always available with best implementation for all type sizes (1, 2, 4 bytes). Make cmpxchg64_local always available. Use "Ir" constraint for "old" operand, like atomic.h atomic_cmpxchg does. Change since v3 : - Add "memory" clobbers (thanks to Nicolas Pitre) - removed __asmeq(), only needed for old compilers, very unlikely on ARMv6+. Note : ARMv7-M should eventually be ifdefed-out of cmpxchg64. But it's not supported by the Linux kernel currently. Put back arm < v6 cmpxchg support. Signed-off-by: Mathieu Desnoyers CC: Catalin Marinas CC: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/include/asm/system.h | 173 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 173 insertions(+) (limited to 'arch') diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 7fce8f3b391..d65b2f5bf41 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -319,6 +319,12 @@ extern void enable_hlt(void); #include +#if __LINUX_ARM_ARCH__ < 6 + +#ifdef CONFIG_SMP +#error "SMP is not supported on this platform" +#endif + /* * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make * them available. @@ -332,6 +338,173 @@ extern void enable_hlt(void); #include #endif +#else /* __LINUX_ARM_ARCH__ >= 6 */ + +extern void __bad_cmpxchg(volatile void *ptr, int size); + +/* + * cmpxchg only support 32-bits operands on ARMv6. + */ + +static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old, + unsigned long new, int size) +{ + unsigned long oldval, res; + + switch (size) { +#ifdef CONFIG_CPU_32v6K + case 1: + do { + asm volatile("@ __cmpxchg1\n" + " ldrexb %1, [%2]\n" + " mov %0, #0\n" + " teq %1, %3\n" + " strexbeq %0, %4, [%2]\n" + : "=&r" (res), "=&r" (oldval) + : "r" (ptr), "Ir" (old), "r" (new) + : "memory", "cc"); + } while (res); + break; + case 2: + do { + asm volatile("@ __cmpxchg1\n" + " ldrexh %1, [%2]\n" + " mov %0, #0\n" + " teq %1, %3\n" + " strexheq %0, %4, [%2]\n" + : "=&r" (res), "=&r" (oldval) + : "r" (ptr), "Ir" (old), "r" (new) + : "memory", "cc"); + } while (res); + break; +#endif /* CONFIG_CPU_32v6K */ + case 4: + do { + asm volatile("@ __cmpxchg4\n" + " ldrex %1, [%2]\n" + " mov %0, #0\n" + " teq %1, %3\n" + " strexeq %0, %4, [%2]\n" + : "=&r" (res), "=&r" (oldval) + : "r" (ptr), "Ir" (old), "r" (new) + : "memory", "cc"); + } while (res); + break; + default: + __bad_cmpxchg(ptr, size); + oldval = 0; + } + + return oldval; +} + +static inline unsigned long __cmpxchg_mb(volatile void *ptr, unsigned long old, + unsigned long new, int size) +{ + unsigned long ret; + + smp_mb(); + ret = __cmpxchg(ptr, old, new, size); + smp_mb(); + + return ret; +} + +#define cmpxchg(ptr,o,n) \ + ((__typeof__(*(ptr)))__cmpxchg_mb((ptr), \ + (unsigned long)(o), \ + (unsigned long)(n), \ + sizeof(*(ptr)))) + +static inline unsigned long __cmpxchg_local(volatile void *ptr, + unsigned long old, + unsigned long new, int size) +{ + unsigned long ret; + + switch (size) { +#ifndef CONFIG_CPU_32v6K + case 1: + case 2: + ret = __cmpxchg_local_generic(ptr, old, new, size); + break; +#endif /* !CONFIG_CPU_32v6K */ + default: + ret = __cmpxchg(ptr, old, new, size); + } + + return ret; +} + +#define cmpxchg_local(ptr,o,n) \ + ((__typeof__(*(ptr)))__cmpxchg_local((ptr), \ + (unsigned long)(o), \ + (unsigned long)(n), \ + sizeof(*(ptr)))) + +#ifdef CONFIG_CPU_32v6K + +/* + * Note : ARMv7-M (currently unsupported by Linux) does not support + * ldrexd/strexd. If ARMv7-M is ever supported by the Linux kernel, it should + * not be allowed to use __cmpxchg64. + */ +static inline unsigned long long __cmpxchg64(volatile void *ptr, + unsigned long long old, + unsigned long long new) +{ + register unsigned long long oldval asm("r0"); + register unsigned long long __old asm("r2") = old; + register unsigned long long __new asm("r4") = new; + unsigned long res; + + do { + asm volatile( + " @ __cmpxchg8\n" + " ldrexd %1, %H1, [%2]\n" + " mov %0, #0\n" + " teq %1, %3\n" + " teqeq %H1, %H3\n" + " strexdeq %0, %4, %H4, [%2]\n" + : "=&r" (res), "=&r" (oldval) + : "r" (ptr), "Ir" (__old), "r" (__new) + : "memory", "cc"); + } while (res); + + return oldval; +} + +static inline unsigned long long __cmpxchg64_mb(volatile void *ptr, + unsigned long long old, + unsigned long long new) +{ + unsigned long long ret; + + smp_mb(); + ret = __cmpxchg64(ptr, old, new); + smp_mb(); + + return ret; +} + +#define cmpxchg64(ptr,o,n) \ + ((__typeof__(*(ptr)))__cmpxchg64_mb((ptr), \ + (unsigned long long)(o), \ + (unsigned long long)(n))) + +#define cmpxchg64_local(ptr,o,n) \ + ((__typeof__(*(ptr)))__cmpxchg64((ptr), \ + (unsigned long long)(o), \ + (unsigned long long)(n))) + +#else /* !CONFIG_CPU_32v6K */ + +#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) + +#endif /* CONFIG_CPU_32v6K */ + +#endif /* __LINUX_ARM_ARCH__ >= 6 */ + #endif /* __ASSEMBLY__ */ #define arch_align_stack(x) (x) -- cgit v1.2.3 From 6daad5c6c586bf07528ae5b39e801b204468f907 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 29 May 2009 10:15:08 +0100 Subject: [ARM] update mach-types Signed-off-by: Russell King --- arch/arm/tools/mach-types | 131 ++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 122 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 945e0d237a1..fec64678a63 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Mon Mar 23 20:09:01 2009 +# Last update: Fri May 29 10:14:20 2009 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -916,7 +916,7 @@ nxdb500 MACH_NXDB500 NXDB500 905 apf9328 MACH_APF9328 APF9328 906 omap_wipoq MACH_OMAP_WIPOQ OMAP_WIPOQ 907 omap_twip MACH_OMAP_TWIP OMAP_TWIP 908 -palmt650 MACH_PALMT650 PALMT650 909 +treo650 MACH_TREO650 TREO650 909 acumen MACH_ACUMEN ACUMEN 910 xp100 MACH_XP100 XP100 911 fs2410 MACH_FS2410 FS2410 912 @@ -1232,7 +1232,7 @@ ql202b MACH_QL202B QL202B 1226 vpac270 MACH_VPAC270 VPAC270 1227 rd129 MACH_RD129 RD129 1228 htcwizard MACH_HTCWIZARD HTCWIZARD 1229 -xscale_treo680 MACH_XSCALE_TREO680 XSCALE_TREO680 1230 +treo680 MACH_TREO680 TREO680 1230 tecon_tmezon MACH_TECON_TMEZON TECON_TMEZON 1231 zylonite MACH_ZYLONITE ZYLONITE 1233 gene1270 MACH_GENE1270 GENE1270 1234 @@ -1418,10 +1418,10 @@ looxc550 MACH_LOOXC550 LOOXC550 1417 cnty_titan MACH_CNTY_TITAN CNTY_TITAN 1418 app3xx MACH_APP3XX APP3XX 1419 sideoatsgrama MACH_SIDEOATSGRAMA SIDEOATSGRAMA 1420 -palmtreo700p MACH_PALMTREO700P PALMTREO700P 1421 -palmtreo700w MACH_PALMTREO700W PALMTREO700W 1422 -palmtreo750 MACH_PALMTREO750 PALMTREO750 1423 -palmtreo755p MACH_PALMTREO755P PALMTREO755P 1424 +treo700p MACH_TREO700P TREO700P 1421 +treo700w MACH_TREO700W TREO700W 1422 +treo750 MACH_TREO750 TREO750 1423 +treo755p MACH_TREO755P TREO755P 1424 ezreganut9200 MACH_EZREGANUT9200 EZREGANUT9200 1425 sarge MACH_SARGE SARGE 1426 a696 MACH_A696 A696 1427 @@ -1721,7 +1721,7 @@ sapphire MACH_SAPPHIRE SAPPHIRE 1729 csb637xo MACH_CSB637XO CSB637XO 1730 evisiong MACH_EVISIONG EVISIONG 1731 stmp37xx MACH_STMP37XX STMP37XX 1732 -stmp378x MACH_STMP38XX STMP38XX 1733 +stmp378x MACH_STMP378X STMP378X 1733 tnt MACH_TNT TNT 1734 tbxt MACH_TBXT TBXT 1735 playmate MACH_PLAYMATE PLAYMATE 1736 @@ -1817,7 +1817,7 @@ smdkc100 MACH_SMDKC100 SMDKC100 1826 tavorevb MACH_TAVOREVB TAVOREVB 1827 saar MACH_SAAR SAAR 1828 deister_eyecam MACH_DEISTER_EYECAM DEISTER_EYECAM 1829 -at91sam9m10ek MACH_AT91SAM9M10EK AT91SAM9M10EK 1830 +at91sam9m10g45ek MACH_AT91SAM9M10G45EK AT91SAM9M10G45EK 1830 linkstation_produo MACH_LINKSTATION_PRODUO LINKSTATION_PRODUO 1831 hit_b0 MACH_HIT_B0 HIT_B0 1832 adx_rmu MACH_ADX_RMU ADX_RMU 1833 @@ -2132,3 +2132,116 @@ apollo MACH_APOLLO APOLLO 2141 at91cap9stk MACH_AT91CAP9STK AT91CAP9STK 2142 spc300 MACH_SPC300 SPC300 2143 eko MACH_EKO EKO 2144 +ccw9m2443 MACH_CCW9M2443 CCW9M2443 2145 +ccw9m2443js MACH_CCW9M2443JS CCW9M2443JS 2146 +m2m_router_device MACH_M2M_ROUTER_DEVICE M2M_ROUTER_DEVICE 2147 +str9104nas MACH_STAR9104NAS STAR9104NAS 2148 +pca100 MACH_PCA100 PCA100 2149 +z3_dm365_mod_01 MACH_Z3_DM365_MOD_01 Z3_DM365_MOD_01 2150 +hipox MACH_HIPOX HIPOX 2151 +omap3_piteds MACH_OMAP3_PITEDS OMAP3_PITEDS 2152 +bm150r MACH_BM150R BM150R 2153 +tbone MACH_TBONE TBONE 2154 +merlin MACH_MERLIN MERLIN 2155 +falcon MACH_FALCON FALCON 2156 +davinci_da850_evm MACH_DAVINCI_DA850_EVM DAVINCI_DA850_EVM 2157 +s5p6440 MACH_S5P6440 S5P6440 2158 +at91sam9g10ek MACH_AT91SAM9G10EK AT91SAM9G10EK 2159 +omap_4430sdp MACH_OMAP_4430SDP OMAP_4430SDP 2160 +lpc313x MACH_LPC313X LPC313X 2161 +magx_zn5 MACH_MAGX_ZN5 MAGX_ZN5 2162 +magx_em30 MACH_MAGX_EM30 MAGX_EM30 2163 +magx_ve66 MACH_MAGX_VE66 MAGX_VE66 2164 +meesc MACH_MEESC MEESC 2165 +otc570 MACH_OTC570 OTC570 2166 +bcu2412 MACH_BCU2412 BCU2412 2167 +beacon MACH_BEACON BEACON 2168 +actia_tgw MACH_ACTIA_TGW ACTIA_TGW 2169 +e4430 MACH_E4430 E4430 2170 +ql300 MACH_QL300 QL300 2171 +btmavb101 MACH_BTMAVB101 BTMAVB101 2172 +btmawb101 MACH_BTMAWB101 BTMAWB101 2173 +sq201 MACH_SQ201 SQ201 2174 +quatro45xx MACH_QUATRO45XX QUATRO45XX 2175 +openpad MACH_OPENPAD OPENPAD 2176 +tx25 MACH_TX25 TX25 2177 +omap3_torpedo MACH_OMAP3_TORPEDO OMAP3_TORPEDO 2178 +htcraphael_k MACH_HTCRAPHAEL_K HTCRAPHAEL_K 2179 +lal43 MACH_LAL43 LAL43 2181 +htcraphael_cdma500 MACH_HTCRAPHAEL_CDMA500 HTCRAPHAEL_CDMA500 2182 +anw6410 MACH_ANW6410 ANW6410 2183 +htcprophet MACH_HTCPROPHET HTCPROPHET 2185 +cfa_10022 MACH_CFA_10022 CFA_10022 2186 +imx27_visstrim_m10 MACH_IMX27_VISSTRIM_M10 IMX27_VISSTRIM_M10 2187 +px2imx27 MACH_PX2IMX27 PX2IMX27 2188 +stm3210e_eval MACH_STM3210E_EVAL STM3210E_EVAL 2189 +dvs10 MACH_DVS10 DVS10 2190 +portuxg20 MACH_PORTUXG20 PORTUXG20 2191 +arm_spv MACH_ARM_SPV ARM_SPV 2192 +smdkc110 MACH_SMDKC110 SMDKC110 2193 +cabespresso MACH_CABESPRESSO CABESPRESSO 2194 +hmc800 MACH_HMC800 HMC800 2195 +sholes MACH_SHOLES SHOLES 2196 +btmxc31 MACH_BTMXC31 BTMXC31 2197 +dt501 MACH_DT501 DT501 2198 +ktx MACH_KTX KTX 2199 +omap3517evm MACH_OMAP3517EVM OMAP3517EVM 2200 +netspace_v2 MACH_NETSPACE_V2 NETSPACE_V2 2201 +netspace_max_v2 MACH_NETSPACE_MAX_V2 NETSPACE_MAX_V2 2202 +d2net_v2 MACH_D2NET_V2 D2NET_V2 2203 +net2big_v2 MACH_NET2BIG_V2 NET2BIG_V2 2204 +net4big_v2 MACH_NET4BIG_V2 NET4BIG_V2 2205 +net5big_v2 MACH_NET5BIG_V2 NET5BIG_V2 2206 +endb2443 MACH_ENDB2443 ENDB2443 2207 +inetspace_v2 MACH_INETSPACE_V2 INETSPACE_V2 2208 +tros MACH_TROS TROS 2209 +pelco_homer MACH_PELCO_HOMER PELCO_HOMER 2210 +ofsp8 MACH_OFSP8 OFSP8 2211 +at91sam9g45ekes MACH_AT91SAM9G45EKES AT91SAM9G45EKES 2212 +guf_cupid MACH_GUF_CUPID GUF_CUPID 2213 +eab1r MACH_EAB1R EAB1R 2214 +desirec MACH_DESIREC DESIREC 2215 +cordoba MACH_CORDOBA CORDOBA 2216 +irvine MACH_IRVINE IRVINE 2217 +sff772 MACH_SFF772 SFF772 2218 +pelco_milano MACH_PELCO_MILANO PELCO_MILANO 2219 +pc7302 MACH_PC7302 PC7302 2220 +bip6000 MACH_BIP6000 BIP6000 2221 +silvermoon MACH_SILVERMOON SILVERMOON 2222 +vc0830 MACH_VC0830 VC0830 2223 +dt430 MACH_DT430 DT430 2224 +ji42pf MACH_JI42PF JI42PF 2225 +gnet_ksm MACH_GNET_KSM GNET_KSM 2226 +gnet_sgm MACH_GNET_SGM GNET_SGM 2227 +gnet_sgr MACH_GNET_SGR GNET_SGR 2228 +omap3_icetekevm MACH_OMAP3_ICETEKEVM OMAP3_ICETEKEVM 2229 +pnp MACH_PNP PNP 2230 +ctera_2bay_k MACH_CTERA_2BAY_K CTERA_2BAY_K 2231 +ctera_2bay_u MACH_CTERA_2BAY_U CTERA_2BAY_U 2232 +sas_c MACH_SAS_C SAS_C 2233 +vma2315 MACH_VMA2315 VMA2315 2234 +vcs MACH_VCS VCS 2235 +spear600 MACH_SPEAR600 SPEAR600 2236 +spear300 MACH_SPEAR300 SPEAR300 2237 +spear1300 MACH_SPEAR1300 SPEAR1300 2238 +lilly1131 MACH_LILLY1131 LILLY1131 2239 +arvoo_ax301 MACH_ARVOO_AX301 ARVOO_AX301 2240 +mapphone MACH_MAPPHONE MAPPHONE 2241 +legend MACH_LEGEND LEGEND 2242 +salsa MACH_SALSA SALSA 2243 +lounge MACH_LOUNGE LOUNGE 2244 +vision MACH_VISION VISION 2245 +vmb20 MACH_VMB20 VMB20 2246 +hy2410 MACH_HY2410 HY2410 2247 +hy9315 MACH_HY9315 HY9315 2248 +bullwinkle MACH_BULLWINKLE BULLWINKLE 2249 +arm_ultimator2 MACH_ARM_ULTIMATOR2 ARM_ULTIMATOR2 2250 +vs_v210 MACH_VS_V210 VS_V210 2252 +vs_v212 MACH_VS_V212 VS_V212 2253 +hmt MACH_HMT HMT 2254 +suen3 MACH_SUEN3 SUEN3 2255 +vesper MACH_VESPER VESPER 2256 +str9 MACH_STR9 STR9 2257 +omap3_wl_ff MACH_OMAP3_WL_FF OMAP3_WL_FF 2258 +simcom MACH_SIMCOM SIMCOM 2259 +mcwebio MACH_MCWEBIO MCWEBIO 2260 -- cgit v1.2.3 From c3dc5bec05a2ae03a72ef82e321d77fb549d951c Mon Sep 17 00:00:00 2001 From: Oskar Schirmer Date: Thu, 28 May 2009 14:34:31 -0700 Subject: flat: fix data sections alignment The flat loader uses an architecture's flat_stack_align() to align the stack but assumes word-alignment is enough for the data sections. However, on the Xtensa S6000 we have registers up to 128bit width which can be used from userspace and therefor need userspace stack and data-section alignment of at least this size. This patch drops flat_stack_align() and uses the same alignment that is required for slab caches, ARCH_SLAB_MINALIGN, or wordsize if it's not defined by the architecture. It also fixes m32r which was obviously kaput, aligning an uninitialized stack entry instead of the stack pointer. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Oskar Schirmer Cc: David Howells Cc: Russell King Cc: Bryan Wu Cc: Geert Uytterhoeven Acked-by: Paul Mundt Cc: Greg Ungerer Signed-off-by: Johannes Weiner Acked-by: Mike Frysinger Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/arm/include/asm/flat.h | 3 --- arch/blackfin/include/asm/flat.h | 1 - arch/h8300/include/asm/flat.h | 1 - arch/m32r/include/asm/flat.h | 1 - arch/m68k/include/asm/flat.h | 1 - arch/sh/include/asm/flat.h | 1 - 6 files changed, 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/flat.h b/arch/arm/include/asm/flat.h index 1d77e51907f..59426a4595c 100644 --- a/arch/arm/include/asm/flat.h +++ b/arch/arm/include/asm/flat.h @@ -5,9 +5,6 @@ #ifndef __ARM_FLAT_H__ #define __ARM_FLAT_H__ -/* An odd number of words will be pushed after this alignment, so - deliberately misalign the value. */ -#define flat_stack_align(sp) sp = (void *)(((unsigned long)(sp) - 4) | 4) #define flat_argvp_envp_on_stack() 1 #define flat_old_ram_flag(flags) (flags) #define flat_reloc_valid(reloc, size) ((reloc) <= (size)) diff --git a/arch/blackfin/include/asm/flat.h b/arch/blackfin/include/asm/flat.h index e70074e05f4..733a178d782 100644 --- a/arch/blackfin/include/asm/flat.h +++ b/arch/blackfin/include/asm/flat.h @@ -10,7 +10,6 @@ #include -#define flat_stack_align(sp) /* nothing needed */ #define flat_argvp_envp_on_stack() 0 #define flat_old_ram_flag(flags) (flags) diff --git a/arch/h8300/include/asm/flat.h b/arch/h8300/include/asm/flat.h index 2a873508a9a..bd12b31b90e 100644 --- a/arch/h8300/include/asm/flat.h +++ b/arch/h8300/include/asm/flat.h @@ -5,7 +5,6 @@ #ifndef __H8300_FLAT_H__ #define __H8300_FLAT_H__ -#define flat_stack_align(sp) /* nothing needed */ #define flat_argvp_envp_on_stack() 1 #define flat_old_ram_flag(flags) 1 #define flat_reloc_valid(reloc, size) ((reloc) <= (size)) diff --git a/arch/m32r/include/asm/flat.h b/arch/m32r/include/asm/flat.h index d851cf0c4aa..5d711c4688f 100644 --- a/arch/m32r/include/asm/flat.h +++ b/arch/m32r/include/asm/flat.h @@ -12,7 +12,6 @@ #ifndef __ASM_M32R_FLAT_H #define __ASM_M32R_FLAT_H -#define flat_stack_align(sp) (*sp += (*sp & 3 ? (4 - (*sp & 3)): 0)) #define flat_argvp_envp_on_stack() 0 #define flat_old_ram_flag(flags) (flags) #define flat_set_persistent(relval, p) 0 diff --git a/arch/m68k/include/asm/flat.h b/arch/m68k/include/asm/flat.h index 814b5174a8e..a0e29079397 100644 --- a/arch/m68k/include/asm/flat.h +++ b/arch/m68k/include/asm/flat.h @@ -5,7 +5,6 @@ #ifndef __M68KNOMMU_FLAT_H__ #define __M68KNOMMU_FLAT_H__ -#define flat_stack_align(sp) /* nothing needed */ #define flat_argvp_envp_on_stack() 1 #define flat_old_ram_flag(flags) (flags) #define flat_reloc_valid(reloc, size) ((reloc) <= (size)) diff --git a/arch/sh/include/asm/flat.h b/arch/sh/include/asm/flat.h index d3b2b4f109e..5d84df5e27f 100644 --- a/arch/sh/include/asm/flat.h +++ b/arch/sh/include/asm/flat.h @@ -12,7 +12,6 @@ #ifndef __ASM_SH_FLAT_H #define __ASM_SH_FLAT_H -#define flat_stack_align(sp) /* nothing needed */ #define flat_argvp_envp_on_stack() 0 #define flat_old_ram_flag(flags) (flags) #define flat_reloc_valid(reloc, size) ((reloc) <= (size)) -- cgit v1.2.3 From 32b154c0b0bae2879bf4e549d861caf1759a3546 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Thu, 28 May 2009 14:34:37 -0700 Subject: x86: ignore VM_LOCKED when determining if hugetlb-backed page tables can be shared or not Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13302 On x86 and x86-64, it is possible that page tables are shared beween shared mappings backed by hugetlbfs. As part of this, page_table_shareable() checks a pair of vma->vm_flags and they must match if they are to be shared. All VMA flags are taken into account, including VM_LOCKED. The problem is that VM_LOCKED is cleared on fork(). When a process with a shared memory segment forks() to exec() a helper, there will be shared VMAs with different flags. The impact is that the shared segment is sometimes considered shareable and other times not, depending on what process is checking. What happens is that the segment page tables are being shared but the count is inaccurate depending on the ordering of events. As the page tables are freed with put_page(), bad pmd's are found when some of the children exit. The hugepage counters also get corrupted and the Total and Free count will no longer match even when all the hugepage-backed regions are freed. This requires a reboot of the machine to "fix". This patch addresses the problem by comparing all flags except VM_LOCKED when deciding if pagetables should be shared or not for hugetlbfs-backed mapping. Signed-off-by: Mel Gorman Acked-by: Hugh Dickins Cc: Ingo Molnar Cc: Cc: Lee Schermerhorn Cc: KOSAKI Motohiro Cc: Cc: Eric B Munson Cc: Adam Litke Cc: Andy Whitcroft Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86/mm/hugetlbpage.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c index 8f307d914c2..f46c340727b 100644 --- a/arch/x86/mm/hugetlbpage.c +++ b/arch/x86/mm/hugetlbpage.c @@ -26,12 +26,16 @@ static unsigned long page_table_shareable(struct vm_area_struct *svma, unsigned long sbase = saddr & PUD_MASK; unsigned long s_end = sbase + PUD_SIZE; + /* Allow segments to share if only one is marked locked */ + unsigned long vm_flags = vma->vm_flags & ~VM_LOCKED; + unsigned long svm_flags = svma->vm_flags & ~VM_LOCKED; + /* * match the virtual addresses, permission and the alignment of the * page table page. */ if (pmd_index(addr) != pmd_index(saddr) || - vma->vm_flags != svma->vm_flags || + vm_flags != svm_flags || sbase < svma->vm_start || svma->vm_end < s_end) return 0; -- cgit v1.2.3 From 6373fffc5d555caf3acf7c5796cec9820aaf7479 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 29 May 2009 16:12:02 -0700 Subject: sparc64: Fix section attribute warnings. CSUM copy to/from user assembler was missing allocatable and executable attributes for .fixup Signed-off-by: David S. Miller --- arch/sparc/lib/csum_copy_from_user.S | 2 +- arch/sparc/lib/csum_copy_to_user.S | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc/lib/csum_copy_from_user.S b/arch/sparc/lib/csum_copy_from_user.S index a22eddbe5db..e0304e6a224 100644 --- a/arch/sparc/lib/csum_copy_from_user.S +++ b/arch/sparc/lib/csum_copy_from_user.S @@ -5,7 +5,7 @@ #define EX_LD(x) \ 98: x; \ - .section .fixup; \ + .section .fixup, "ax"; \ .align 4; \ 99: retl; \ mov -1, %o0; \ diff --git a/arch/sparc/lib/csum_copy_to_user.S b/arch/sparc/lib/csum_copy_to_user.S index d5b12f441f0..afd01acc587 100644 --- a/arch/sparc/lib/csum_copy_to_user.S +++ b/arch/sparc/lib/csum_copy_to_user.S @@ -5,7 +5,7 @@ #define EX_ST(x) \ 98: x; \ - .section .fixup; \ + .section .fixup,"ax"; \ .align 4; \ 99: retl; \ mov -1, %o0; \ -- cgit v1.2.3 From 61c8c67e3ad67ea1d1360f2e88688bd942834756 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 26 May 2009 14:58:39 -0700 Subject: acpi-cpufreq: fix printk typo and indentation Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index 208ecf6643d..54b6de2cd94 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -693,8 +693,8 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) if (perf->control_register.space_id == ACPI_ADR_SPACE_FIXED_HARDWARE && policy->cpuinfo.transition_latency > 20 * 1000) { policy->cpuinfo.transition_latency = 20 * 1000; - printk_once(KERN_INFO "Capping off P-state tranision" - " latency at 20 uS\n"); + printk_once(KERN_INFO + "P-state transition latency capped at 20 uS\n"); } /* table init */ -- cgit v1.2.3