From 16aadcb680e188bd0a6d7b0ecd5d0ceabd4fba4d Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Tue, 9 Jun 2009 01:18:41 +0000 Subject: Blackfin: only handle CPLB protection violations when MPU is enabled We don't need to handle CPLB protection violations unless we are running with the MPU on. Fix the entry code to call common trap_c, and remove the code which is never run. This allows the traps test suite to run on older boards with the MPU disabled. URL: http://blackfin.uclinux.org/gf/tracker/5129 Signed-off-by: Robin Getz Signed-off-by: Mike Frysinger --- arch/blackfin/kernel/cplb-nompu/cplbmgr.c | 54 ++----------------------------- arch/blackfin/mach-common/entry.S | 11 ++++--- 2 files changed, 10 insertions(+), 55 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/cplb-nompu/cplbmgr.c b/arch/blackfin/kernel/cplb-nompu/cplbmgr.c index 8cbb47c7b66..12b030842fd 100644 --- a/arch/blackfin/kernel/cplb-nompu/cplbmgr.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbmgr.c @@ -28,6 +28,7 @@ #include #include #include +#include /* * WARNING @@ -100,28 +101,6 @@ static inline void write_icplb_data(int cpu, int idx, unsigned long data, #endif } -/* - * Given the contents of the status register, return the index of the - * CPLB that caused the fault. - */ -static inline int faulting_cplb_index(int status) -{ - int signbits = __builtin_bfin_norm_fr1x32(status & 0xFFFF); - return 30 - signbits; -} - -/* - * Given the contents of the status register and the DCPLB_DATA contents, - * return true if a write access should be permitted. - */ -static inline int write_permitted(int status, unsigned long data) -{ - if (status & FAULT_USERSUPV) - return !!(data & CPLB_SUPV_WR); - else - return !!(data & CPLB_USER_WR); -} - /* Counters to implement round-robin replacement. */ static int icplb_rr_index[NR_CPUS] PDT_ATTR; static int dcplb_rr_index[NR_CPUS] PDT_ATTR; @@ -245,43 +224,16 @@ MGR_ATTR static int dcplb_miss(int cpu) return CPLB_RELOADED; } -MGR_ATTR static noinline int dcplb_protection_fault(int cpu) -{ - int status = bfin_read_DCPLB_STATUS(); - - nr_dcplb_prot[cpu]++; - - if (likely(status & FAULT_RW)) { - int idx = faulting_cplb_index(status); - unsigned long regaddr = DCPLB_DATA0 + idx * 4; - unsigned long data = bfin_read32(regaddr); - - /* Check if fault is to dirty a clean page */ - if (!(data & CPLB_WT) && !(data & CPLB_DIRTY) && - write_permitted(status, data)) { - - dcplb_tbl[cpu][idx].data = data; - bfin_write32(regaddr, data); - return CPLB_RELOADED; - } - } - - return CPLB_PROT_VIOL; -} - MGR_ATTR int cplb_hdr(int seqstat, struct pt_regs *regs) { int cause = seqstat & 0x3f; unsigned int cpu = smp_processor_id(); switch (cause) { - case 0x2C: + case VEC_CPLB_I_M: return icplb_miss(cpu); - case 0x26: + case VEC_CPLB_M: return dcplb_miss(cpu); default: - if (unlikely(cause == 0x23)) - return dcplb_protection_fault(cpu); - return CPLB_UNKNOWN_ERR; } } diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index da0558ad1b1..25c6aa42d45 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -42,6 +42,7 @@ #include /* TIF_NEED_RESCHED */ #include #include +#include #include @@ -84,13 +85,15 @@ ENTRY(_ex_workaround_261) if !cc jump _bfin_return_from_exception; /* fall through */ R7 = P4; - R6 = 0x26; /* Data CPLB Miss */ + R6 = VEC_CPLB_M; /* Data CPLB Miss */ cc = R6 == R7; if cc jump _ex_dcplb_miss (BP); - R6 = 0x23; /* Data CPLB Miss */ +#ifdef CONFIG_MPU + R6 = VEC_CPLB_VL; /* Data CPLB Violation */ cc = R6 == R7; if cc jump _ex_dcplb_viol (BP); - /* Handle 0x23 Data CPLB Protection Violation +#endif + /* Handle Data CPLB Protection Violation * and Data CPLB Multiple Hits - Linux Trap Zero */ jump _ex_trap_c; @@ -270,7 +273,7 @@ ENTRY(_bfin_return_from_exception) r6.l = lo(SEQSTAT_EXCAUSE); r6.h = hi(SEQSTAT_EXCAUSE); r7 = r7 & r6; - r6 = 0x25; + r6 = VEC_UNCOV; CC = R7 == R6; if CC JUMP _double_fault; #endif -- cgit v1.2.3 From aa286ba3aef7d1b78467313111a13888fb4c3a66 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 5 Jun 2009 16:43:39 +0000 Subject: Blackfin: export ip_compute_csum/csum_partial_copy_from_user symbols All other arches do this, and some places like the net/scsi code will fail as modules without them. Signed-off-by: Mike Frysinger --- arch/blackfin/lib/checksum.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/blackfin/lib/checksum.c b/arch/blackfin/lib/checksum.c index 762a7f02970..cd605e7d851 100644 --- a/arch/blackfin/lib/checksum.c +++ b/arch/blackfin/lib/checksum.c @@ -116,6 +116,7 @@ __sum16 ip_compute_csum(const void *buff, int len) { return (__force __sum16)~do_csum(buff, len); } +EXPORT_SYMBOL(ip_compute_csum); /* * copy from fs while checksumming, otherwise like csum_partial @@ -130,6 +131,7 @@ csum_partial_copy_from_user(const void __user *src, void *dst, memcpy(dst, (__force void *)src, len); return csum_partial(dst, len, sum); } +EXPORT_SYMBOL(csum_partial_copy_from_user); /* * copy from ds while checksumming, otherwise like csum_partial -- cgit v1.2.3 From 67834fa93d7a4fac9069a07e739110d3916d8cd4 Mon Sep 17 00:00:00 2001 From: Jie Zhang Date: Wed, 10 Jun 2009 06:26:26 +0000 Subject: Blackfin: rename bfin_addr_dcachable to bfin_addr_dcacheable The latter naming convention is much more common. Signed-off-by: Jie Zhang Signed-off-by: Mike Frysinger --- arch/blackfin/include/asm/cacheflush.h | 2 +- arch/blackfin/kernel/bfin_dma_5xx.c | 4 ++-- arch/blackfin/kernel/cplb-mpu/cplbmgr.c | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/include/asm/cacheflush.h b/arch/blackfin/include/asm/cacheflush.h index 94697f0f6f4..18bc4f71fe2 100644 --- a/arch/blackfin/include/asm/cacheflush.h +++ b/arch/blackfin/include/asm/cacheflush.h @@ -97,7 +97,7 @@ do { memcpy(dst, src, len); \ extern unsigned long reserved_mem_dcache_on; extern unsigned long reserved_mem_icache_on; -static inline int bfin_addr_dcachable(unsigned long addr) +static inline int bfin_addr_dcacheable(unsigned long addr) { #ifdef CONFIG_BFIN_DCACHE if (addr < (_ramend - DMA_UNCACHED_REGION)) diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index 763ed84ba45..e0bf8cc0690 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -453,10 +453,10 @@ void *dma_memcpy(void *pdst, const void *psrc, size_t size) unsigned long src = (unsigned long)psrc; size_t bulk, rest; - if (bfin_addr_dcachable(src)) + if (bfin_addr_dcacheable(src)) blackfin_dcache_flush_range(src, src + size); - if (bfin_addr_dcachable(dst)) + if (bfin_addr_dcacheable(dst)) blackfin_dcache_invalidate_range(dst, dst + size); bulk = size & ~0xffff; diff --git a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c index 87463ce87f5..784923e52a9 100644 --- a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c +++ b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c @@ -151,7 +151,7 @@ static noinline int dcplb_miss(unsigned int cpu) d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB; #ifdef CONFIG_BFIN_DCACHE - if (bfin_addr_dcachable(addr)) { + if (bfin_addr_dcacheable(addr)) { d_data |= CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND; #ifdef CONFIG_BFIN_WT d_data |= CPLB_L1_AOW | CPLB_WT; -- cgit v1.2.3 From 70f12567ac9aca9c2f242ae060d7de245904889e Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Sun, 7 Jun 2009 17:18:25 -0400 Subject: Blackfin: add support for GENERIC_BUG Signed-off-by: Mike Frysinger --- arch/blackfin/Kconfig | 4 +++ arch/blackfin/include/asm/bug.h | 57 ++++++++++++++++++++++++++++++++++---- arch/blackfin/kernel/traps.c | 30 ++++++++++++++++++++ arch/blackfin/kernel/vmlinux.lds.S | 16 +++++++++-- 4 files changed, 99 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index c56fd3eb7c1..74cdcf39b41 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -28,6 +28,10 @@ config BLACKFIN select HAVE_OPROFILE select ARCH_WANT_OPTIONAL_GPIOLIB +config GENERIC_BUG + def_bool y + depends on BUG + config ZONE_DMA bool default y diff --git a/arch/blackfin/include/asm/bug.h b/arch/blackfin/include/asm/bug.h index 6d3e11b1fc5..655e49540e4 100644 --- a/arch/blackfin/include/asm/bug.h +++ b/arch/blackfin/include/asm/bug.h @@ -2,13 +2,58 @@ #define _BLACKFIN_BUG_H #ifdef CONFIG_BUG -#define HAVE_ARCH_BUG -#define BUG() do { \ - dump_bfin_trace_buffer(); \ - printk(KERN_EMERG "BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \ - panic("BUG!"); \ -} while (0) +#define BFIN_BUG_OPCODE 0xefcd + +#ifdef CONFIG_DEBUG_BUGVERBOSE + +#define _BUG_OR_WARN(flags) \ + asm volatile( \ + "1: .hword %0\n" \ + " .section __bug_table,\"a\",@progbits\n" \ + "2: .long 1b\n" \ + " .long %1\n" \ + " .short %2\n" \ + " .short %3\n" \ + " .org 2b + %4\n" \ + " .previous" \ + : \ + : "i"(BFIN_BUG_OPCODE), "i"(__FILE__), \ + "i"(__LINE__), "i"(flags), \ + "i"(sizeof(struct bug_entry))) + +#else + +#define _BUG_OR_WARN(flags) \ + asm volatile( \ + "1: .hword %0\n" \ + " .section __bug_table,\"a\",@progbits\n" \ + "2: .long 1b\n" \ + " .short %1\n" \ + " .org 2b + %2\n" \ + " .previous" \ + : \ + : "i"(BFIN_BUG_OPCODE), "i"(flags), \ + "i"(sizeof(struct bug_entry))) + +#endif /* CONFIG_DEBUG_BUGVERBOSE */ + +#define BUG() \ + do { \ + _BUG_OR_WARN(0); \ + for (;;); \ + } while (0) + +#define WARN_ON(condition) \ + ({ \ + int __ret_warn_on = !!(condition); \ + if (unlikely(__ret_warn_on)) \ + _BUG_OR_WARN(BUGFLAG_WARNING); \ + unlikely(__ret_warn_on); \ + }) + +#define HAVE_ARCH_BUG +#define HAVE_ARCH_WARN_ON #endif diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index aa76dfb0226..2405f193224 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -27,6 +27,7 @@ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include #include #include #include @@ -381,6 +382,23 @@ asmlinkage void trap_c(struct pt_regs *fp) /* 0x20 - Reserved, Caught by default */ /* 0x21 - Undefined Instruction, handled here */ case VEC_UNDEF_I: +#ifdef CONFIG_BUG + if (kernel_mode_regs(fp)) { + switch (report_bug(fp->pc, fp)) { + case BUG_TRAP_TYPE_NONE: + break; + case BUG_TRAP_TYPE_WARN: + dump_bfin_trace_buffer(); + fp->pc += 2; + goto traps_done; + case BUG_TRAP_TYPE_BUG: + /* call to panic() will dump trace, and it is + * off at this point, so it won't be clobbered + */ + panic("BUG()"); + } + } +#endif info.si_code = ILL_ILLOPC; sig = SIGILL; verbose_printk(KERN_NOTICE EXC_0x21(KERN_NOTICE)); @@ -792,6 +810,18 @@ void dump_bfin_trace_buffer(void) } EXPORT_SYMBOL(dump_bfin_trace_buffer); +#ifdef CONFIG_BUG +int is_valid_bugaddr(unsigned long addr) +{ + unsigned short opcode; + + if (!get_instruction(&opcode, (unsigned short *)addr)) + return 0; + + return opcode == BFIN_BUG_OPCODE; +} +#endif + /* * Checks to see if the address pointed to is either a * 16-bit CALL instruction, or a 32-bit CALL instruction diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S index 8b67167cb4f..119fbdb4647 100644 --- a/arch/blackfin/kernel/vmlinux.lds.S +++ b/arch/blackfin/kernel/vmlinux.lds.S @@ -166,6 +166,20 @@ SECTIONS } PERCPU(4) SECURITY_INIT + + /* we have to discard exit text and such at runtime, not link time, to + * handle embedded cross-section references (alt instructions, bug + * table, eh_frame, etc...) + */ + .exit.text : + { + EXIT_TEXT + } + .exit.data : + { + EXIT_DATA + } + .init.ramfs : { . = ALIGN(4); @@ -264,8 +278,6 @@ SECTIONS /DISCARD/ : { - EXIT_TEXT - EXIT_DATA *(.exitcall.exit) } } -- cgit v1.2.3 From 2466ac65560ee8b7506eea3987aba9519355fd02 Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Mon, 8 Jun 2009 17:52:27 +0000 Subject: Blackfin: include the cpu compiled version in /proc/cpuinfo Since the compiled-for cpu revision can be significant, include it in the cpuinfo output along side the cpu revision we're currently running on. Signed-off-by: Robin Getz Signed-off-by: Mike Frysinger --- arch/blackfin/kernel/setup.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 80447f99c2b..f5f516e817f 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -1098,7 +1098,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) CPUID, bfin_cpuid()); seq_printf(m, "model name\t: ADSP-%s %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n" - "stepping\t: %d\n", + "stepping\t: %d ", cpu, cclk/1000000, sclk/1000000, #ifdef CONFIG_MPU "mpu on", @@ -1107,7 +1107,16 @@ static int show_cpuinfo(struct seq_file *m, void *v) #endif revid); - seq_printf(m, "cpu MHz\t\t: %lu.%03lu/%lu.%03lu\n", + if (bfin_revid() != bfin_compiled_revid()) { + if (bfin_compiled_revid() == -1) + seq_printf(m, "(Compiled for Rev none)"); + else if (bfin_compiled_revid() == 0xffff) + seq_printf(m, "(Compiled for Rev any)"); + else + seq_printf(m, "(Compiled for Rev %d)", bfin_compiled_revid()); + } + + seq_printf(m, "\ncpu MHz\t\t: %lu.%03lu/%lu.%03lu\n", cclk/1000000, cclk%1000000, sclk/1000000, sclk%1000000); seq_printf(m, "bogomips\t: %lu.%02lu\n" -- cgit v1.2.3 From 47e9dedb720364e0adff0e99960fa294c6161f71 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Wed, 10 Jun 2009 08:57:08 +0000 Subject: Blackfin: add blackfin_invalidate_entire_icache for SMP systems The KGDB code uses this when switching processors to make sure the icache is in a valid state. Signed-off-by: Sonic Zhang Signed-off-by: Mike Frysinger --- arch/blackfin/include/asm/cache.h | 11 ++++++++--- arch/blackfin/include/asm/cacheflush.h | 1 + arch/blackfin/include/asm/cpu.h | 1 + arch/blackfin/kernel/setup.c | 3 +++ arch/blackfin/mach-common/cache-c.c | 14 +++++++++++++- arch/blackfin/mach-common/smp.c | 11 +++++++++++ 6 files changed, 37 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/include/asm/cache.h b/arch/blackfin/include/asm/cache.h index 86637814cf2..2ef669ed922 100644 --- a/arch/blackfin/include/asm/cache.h +++ b/arch/blackfin/include/asm/cache.h @@ -34,9 +34,13 @@ #define L1_CACHE_SHIFT_MAX 5 #if defined(CONFIG_SMP) && \ - !defined(CONFIG_BFIN_CACHE_COHERENT) && \ - defined(CONFIG_BFIN_DCACHE) -#define __ARCH_SYNC_CORE_DCACHE + !defined(CONFIG_BFIN_CACHE_COHERENT) +# if defined(CONFIG_BFIN_ICACHE) +# define __ARCH_SYNC_CORE_ICACHE +# endif +# if defined(CONFIG_BFIN_DCACHE) +# define __ARCH_SYNC_CORE_DCACHE +# endif #ifndef __ASSEMBLY__ asmlinkage void __raw_smp_mark_barrier_asm(void); asmlinkage void __raw_smp_check_barrier_asm(void); @@ -51,6 +55,7 @@ static inline void smp_check_barrier(void) } void resync_core_dcache(void); +void resync_core_icache(void); #endif #endif diff --git a/arch/blackfin/include/asm/cacheflush.h b/arch/blackfin/include/asm/cacheflush.h index 18bc4f71fe2..5c17dee53b5 100644 --- a/arch/blackfin/include/asm/cacheflush.h +++ b/arch/blackfin/include/asm/cacheflush.h @@ -37,6 +37,7 @@ extern void blackfin_dcache_flush_range(unsigned long start_address, unsigned lo extern void blackfin_dcache_invalidate_range(unsigned long start_address, unsigned long end_address); extern void blackfin_dflush_page(void *page); extern void blackfin_invalidate_entire_dcache(void); +extern void blackfin_invalidate_entire_icache(void); #define flush_dcache_mmap_lock(mapping) do { } while (0) #define flush_dcache_mmap_unlock(mapping) do { } while (0) diff --git a/arch/blackfin/include/asm/cpu.h b/arch/blackfin/include/asm/cpu.h index c2594ef877f..565b8136855 100644 --- a/arch/blackfin/include/asm/cpu.h +++ b/arch/blackfin/include/asm/cpu.h @@ -34,6 +34,7 @@ struct blackfin_cpudata { unsigned int dmemctl; unsigned long loops_per_jiffy; unsigned long dcache_invld_count; + unsigned long icache_invld_count; }; DECLARE_PER_CPU(struct blackfin_cpudata, cpu_data); diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index f5f516e817f..6454babdfaf 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -1181,6 +1181,9 @@ static int show_cpuinfo(struct seq_file *m, void *v) #ifdef __ARCH_SYNC_CORE_DCACHE seq_printf(m, "SMP Dcache Flushes\t: %lu\n\n", cpudata->dcache_invld_count); #endif +#ifdef __ARCH_SYNC_CORE_ICACHE + seq_printf(m, "SMP Icache Flushes\t: %lu\n\n", cpudata->icache_invld_count); +#endif #ifdef CONFIG_BFIN_ICACHE_LOCK switch ((cpudata->imemctl >> 3) & WAYALL_L) { case WAY0_L: diff --git a/arch/blackfin/mach-common/cache-c.c b/arch/blackfin/mach-common/cache-c.c index e6ab1f81512..b59ce3cb380 100644 --- a/arch/blackfin/mach-common/cache-c.c +++ b/arch/blackfin/mach-common/cache-c.c @@ -16,9 +16,21 @@ void blackfin_invalidate_entire_dcache(void) { u32 dmem = bfin_read_DMEM_CONTROL(); - SSYNC(); bfin_write_DMEM_CONTROL(dmem & ~0xc); SSYNC(); bfin_write_DMEM_CONTROL(dmem); SSYNC(); } + +/* Invalidate the Entire Instruction cache by + * clearing IMC bit + */ +void blackfin_invalidate_entire_icache(void) +{ + u32 imem = bfin_read_IMEM_CONTROL(); + bfin_write_IMEM_CONTROL(imem & ~0x4); + SSYNC(); + bfin_write_IMEM_CONTROL(imem); + SSYNC(); +} + diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c index 3b8ebaee77f..c187da2448b 100644 --- a/arch/blackfin/mach-common/smp.c +++ b/arch/blackfin/mach-common/smp.c @@ -468,6 +468,17 @@ void smp_icache_flush_range_others(unsigned long start, unsigned long end) } EXPORT_SYMBOL_GPL(smp_icache_flush_range_others); +#ifdef __ARCH_SYNC_CORE_ICACHE +void resync_core_icache(void) +{ + unsigned int cpu = get_cpu(); + blackfin_invalidate_entire_icache(); + ++per_cpu(cpu_data, cpu).icache_invld_count; + put_cpu(); +} +EXPORT_SYMBOL(resync_core_icache); +#endif + #ifdef __ARCH_SYNC_CORE_DCACHE unsigned long barrier_mask __attribute__ ((__section__(".l2.bss"))); -- cgit v1.2.3 From 6510a20e1b1a3a5703429a09d03adf44882ae373 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Sun, 7 Jun 2009 15:07:25 -0400 Subject: Blackfin: fix trap_c() exit paths The trap_c() code pushes the hardware trace status onto the stack, but doesn't always restore it when returning from some trap code paths. So unify the exit code paths to all head to the end of the function. Signed-off-by: Mike Frysinger --- arch/blackfin/kernel/traps.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 2405f193224..ed7127b1b9f 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -309,7 +309,7 @@ asmlinkage void trap_c(struct pt_regs *fp) CHK_DEBUGGER_TRAP_MAYBE(); /* Check if this is a breakpoint in kernel space */ if (fp->ipend & 0xffc0) - return; + goto traps_done; else break; /* 0x03 - User Defined, userspace stack overflow */ @@ -325,7 +325,7 @@ asmlinkage void trap_c(struct pt_regs *fp) info.si_code = TRAP_ILLTRAP; sig = SIGTRAP; CHK_DEBUGGER_TRAP(); - return; + goto traps_done; #endif /* 0x04 - User Defined */ /* 0x05 - User Defined */ @@ -355,7 +355,7 @@ asmlinkage void trap_c(struct pt_regs *fp) CHK_DEBUGGER_TRAP_MAYBE(); /* Check if this is a single step in kernel space */ if (fp->ipend & 0xffc0) - return; + goto traps_done; else break; /* 0x11 - Trace Buffer Full, handled here */ @@ -459,7 +459,7 @@ asmlinkage void trap_c(struct pt_regs *fp) CHK_DEBUGGER_TRAP_MAYBE(); /* Check if this is a watchpoint in kernel space */ if (fp->ipend & 0xffc0) - return; + goto traps_done; else break; #ifdef CONFIG_BF535 @@ -624,8 +624,8 @@ asmlinkage void trap_c(struct pt_regs *fp) if (ANOMALY_05000461 && trapnr == VEC_HWERR && !access_ok(VERIFY_READ, fp->pc, 8)) fp->pc = SAFE_USER_INSTRUCTION; + traps_done: trace_buffer_restore(j); - return; } /* Typical exception handling routines */ -- cgit v1.2.3 From 82bd1d7d45a69c54fb6beedb78ccb1c7d308dd93 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Sun, 7 Jun 2009 17:08:28 -0400 Subject: Blackfin: push down exception oops checking Rather than maintain a duplicate list of valid exceptions we can take in the kernel both in the first if() check and the switch() check, delay the oops check to after the switch(). All valid exceptions will have returned by this point leaving only the invalid ones. Signed-off-by: Mike Frysinger --- arch/blackfin/kernel/traps.c | 88 ++++++++++++++++++++++---------------------- 1 file changed, 43 insertions(+), 45 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index ed7127b1b9f..d279552fe9b 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -239,6 +239,11 @@ asmlinkage void double_fault_c(struct pt_regs *fp) } +static int kernel_mode_regs(struct pt_regs *regs) +{ + return regs->ipend & 0xffc0; +} + asmlinkage void trap_c(struct pt_regs *fp) { #ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON @@ -247,6 +252,7 @@ asmlinkage void trap_c(struct pt_regs *fp) #ifdef CONFIG_DEBUG_HUNT_FOR_ZERO unsigned int cpu = smp_processor_id(); #endif + const char *strerror = NULL; int sig = 0; siginfo_t info; unsigned long trapnr = fp->seqstat & SEQSTAT_EXCAUSE; @@ -260,27 +266,10 @@ asmlinkage void trap_c(struct pt_regs *fp) * double faults if the stack has become corrupt */ - /* If the fault was caused by a kernel thread, or interrupt handler - * we will kernel panic, so the system reboots. - * If KGDB is enabled, don't set this for kernel breakpoints - */ - - /* TODO: check to see if we are in some sort of deferred HWERR - * that we should be able to recover from, not kernel panic - */ - if ((bfin_read_IPEND() & 0xFFC0) && (trapnr != VEC_STEP) -#ifdef CONFIG_KGDB - && (trapnr != VEC_EXCPT02) +#ifndef CONFIG_KGDB + /* IPEND is skipped if KGDB isn't enabled (see entry code) */ + fp->ipend = bfin_read_IPEND(); #endif - ){ - console_verbose(); - oops_in_progress = 1; - } else if (current) { - if (current->mm == NULL) { - console_verbose(); - oops_in_progress = 1; - } - } /* trap_c() will be called for exceptions. During exceptions * processing, the pc value should be set with retx value. @@ -308,7 +297,7 @@ asmlinkage void trap_c(struct pt_regs *fp) sig = SIGTRAP; CHK_DEBUGGER_TRAP_MAYBE(); /* Check if this is a breakpoint in kernel space */ - if (fp->ipend & 0xffc0) + if (kernel_mode_regs(fp)) goto traps_done; else break; @@ -316,7 +305,7 @@ asmlinkage void trap_c(struct pt_regs *fp) case VEC_EXCPT03: info.si_code = SEGV_STACKFLOW; sig = SIGSEGV; - verbose_printk(KERN_NOTICE EXC_0x03(KERN_NOTICE)); + strerror = KERN_NOTICE EXC_0x03(KERN_NOTICE); CHK_DEBUGGER_TRAP_MAYBE(); break; /* 0x02 - KGDB initial connection and break signal trap */ @@ -345,7 +334,7 @@ asmlinkage void trap_c(struct pt_regs *fp) case VEC_EXCPT04 ... VEC_EXCPT15: info.si_code = ILL_ILLPARAOP; sig = SIGILL; - verbose_printk(KERN_NOTICE EXC_0x04(KERN_NOTICE)); + strerror = KERN_NOTICE EXC_0x04(KERN_NOTICE); CHK_DEBUGGER_TRAP_MAYBE(); break; /* 0x10 HW Single step, handled here */ @@ -354,7 +343,7 @@ asmlinkage void trap_c(struct pt_regs *fp) sig = SIGTRAP; CHK_DEBUGGER_TRAP_MAYBE(); /* Check if this is a single step in kernel space */ - if (fp->ipend & 0xffc0) + if (kernel_mode_regs(fp)) goto traps_done; else break; @@ -362,7 +351,7 @@ asmlinkage void trap_c(struct pt_regs *fp) case VEC_OVFLOW: info.si_code = TRAP_TRACEFLOW; sig = SIGTRAP; - verbose_printk(KERN_NOTICE EXC_0x11(KERN_NOTICE)); + strerror = KERN_NOTICE EXC_0x11(KERN_NOTICE); CHK_DEBUGGER_TRAP_MAYBE(); break; /* 0x12 - Reserved, Caught by default */ @@ -401,35 +390,35 @@ asmlinkage void trap_c(struct pt_regs *fp) #endif info.si_code = ILL_ILLOPC; sig = SIGILL; - verbose_printk(KERN_NOTICE EXC_0x21(KERN_NOTICE)); + strerror = KERN_NOTICE EXC_0x21(KERN_NOTICE); CHK_DEBUGGER_TRAP_MAYBE(); break; /* 0x22 - Illegal Instruction Combination, handled here */ case VEC_ILGAL_I: info.si_code = ILL_ILLPARAOP; sig = SIGILL; - verbose_printk(KERN_NOTICE EXC_0x22(KERN_NOTICE)); + strerror = KERN_NOTICE EXC_0x22(KERN_NOTICE); CHK_DEBUGGER_TRAP_MAYBE(); break; /* 0x23 - Data CPLB protection violation, handled here */ case VEC_CPLB_VL: info.si_code = ILL_CPLB_VI; sig = SIGBUS; - verbose_printk(KERN_NOTICE EXC_0x23(KERN_NOTICE)); + strerror = KERN_NOTICE EXC_0x23(KERN_NOTICE); CHK_DEBUGGER_TRAP_MAYBE(); break; /* 0x24 - Data access misaligned, handled here */ case VEC_MISALI_D: info.si_code = BUS_ADRALN; sig = SIGBUS; - verbose_printk(KERN_NOTICE EXC_0x24(KERN_NOTICE)); + strerror = KERN_NOTICE EXC_0x24(KERN_NOTICE); CHK_DEBUGGER_TRAP_MAYBE(); break; /* 0x25 - Unrecoverable Event, handled here */ case VEC_UNCOV: info.si_code = ILL_ILLEXCPT; sig = SIGILL; - verbose_printk(KERN_NOTICE EXC_0x25(KERN_NOTICE)); + strerror = KERN_NOTICE EXC_0x25(KERN_NOTICE); CHK_DEBUGGER_TRAP_MAYBE(); break; /* 0x26 - Data CPLB Miss, normal case is handled in _cplb_hdr, @@ -437,7 +426,7 @@ asmlinkage void trap_c(struct pt_regs *fp) case VEC_CPLB_M: info.si_code = BUS_ADRALN; sig = SIGBUS; - verbose_printk(KERN_NOTICE EXC_0x26(KERN_NOTICE)); + strerror = KERN_NOTICE EXC_0x26(KERN_NOTICE); break; /* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero, handled here */ case VEC_CPLB_MHIT: @@ -445,10 +434,10 @@ asmlinkage void trap_c(struct pt_regs *fp) sig = SIGSEGV; #ifdef CONFIG_DEBUG_HUNT_FOR_ZERO if (cpu_pda[cpu].dcplb_fault_addr < FIXED_CODE_START) - verbose_printk(KERN_NOTICE "NULL pointer access\n"); + strerror = KERN_NOTICE "NULL pointer access\n"; else #endif - verbose_printk(KERN_NOTICE EXC_0x27(KERN_NOTICE)); + strerror = KERN_NOTICE EXC_0x27(KERN_NOTICE); CHK_DEBUGGER_TRAP_MAYBE(); break; /* 0x28 - Emulation Watchpoint, handled here */ @@ -458,7 +447,7 @@ asmlinkage void trap_c(struct pt_regs *fp) pr_debug(EXC_0x28(KERN_DEBUG)); CHK_DEBUGGER_TRAP_MAYBE(); /* Check if this is a watchpoint in kernel space */ - if (fp->ipend & 0xffc0) + if (kernel_mode_regs(fp)) goto traps_done; else break; @@ -467,7 +456,7 @@ asmlinkage void trap_c(struct pt_regs *fp) case VEC_ISTRU_VL: /* ADSP-BF535 only (MH) */ info.si_code = BUS_OPFETCH; sig = SIGBUS; - verbose_printk(KERN_NOTICE "BF535: VEC_ISTRU_VL\n"); + strerror = KERN_NOTICE "BF535: VEC_ISTRU_VL\n"; CHK_DEBUGGER_TRAP_MAYBE(); break; #else @@ -477,21 +466,21 @@ asmlinkage void trap_c(struct pt_regs *fp) case VEC_MISALI_I: info.si_code = BUS_ADRALN; sig = SIGBUS; - verbose_printk(KERN_NOTICE EXC_0x2A(KERN_NOTICE)); + strerror = KERN_NOTICE EXC_0x2A(KERN_NOTICE); CHK_DEBUGGER_TRAP_MAYBE(); break; /* 0x2B - Instruction CPLB protection violation, handled here */ case VEC_CPLB_I_VL: info.si_code = ILL_CPLB_VI; sig = SIGBUS; - verbose_printk(KERN_NOTICE EXC_0x2B(KERN_NOTICE)); + strerror = KERN_NOTICE EXC_0x2B(KERN_NOTICE); CHK_DEBUGGER_TRAP_MAYBE(); break; /* 0x2C - Instruction CPLB miss, handled in _cplb_hdr */ case VEC_CPLB_I_M: info.si_code = ILL_CPLB_MISS; sig = SIGBUS; - verbose_printk(KERN_NOTICE EXC_0x2C(KERN_NOTICE)); + strerror = KERN_NOTICE EXC_0x2C(KERN_NOTICE); break; /* 0x2D - Instruction CPLB Multiple Hits, handled here */ case VEC_CPLB_I_MHIT: @@ -499,17 +488,17 @@ asmlinkage void trap_c(struct pt_regs *fp) sig = SIGSEGV; #ifdef CONFIG_DEBUG_HUNT_FOR_ZERO if (cpu_pda[cpu].icplb_fault_addr < FIXED_CODE_START) - verbose_printk(KERN_NOTICE "Jump to NULL address\n"); + strerror = KERN_NOTICE "Jump to NULL address\n"; else #endif - verbose_printk(KERN_NOTICE EXC_0x2D(KERN_NOTICE)); + strerror = KERN_NOTICE EXC_0x2D(KERN_NOTICE); CHK_DEBUGGER_TRAP_MAYBE(); break; /* 0x2E - Illegal use of Supervisor Resource, handled here */ case VEC_ILL_RES: info.si_code = ILL_PRVOPC; sig = SIGILL; - verbose_printk(KERN_NOTICE EXC_0x2E(KERN_NOTICE)); + strerror = KERN_NOTICE EXC_0x2E(KERN_NOTICE); CHK_DEBUGGER_TRAP_MAYBE(); break; /* 0x2F - Reserved, Caught by default */ @@ -537,17 +526,17 @@ asmlinkage void trap_c(struct pt_regs *fp) case (SEQSTAT_HWERRCAUSE_SYSTEM_MMR): info.si_code = BUS_ADRALN; sig = SIGBUS; - verbose_printk(KERN_NOTICE HWC_x2(KERN_NOTICE)); + strerror = KERN_NOTICE HWC_x2(KERN_NOTICE); break; /* External Memory Addressing Error */ case (SEQSTAT_HWERRCAUSE_EXTERN_ADDR): info.si_code = BUS_ADRERR; sig = SIGBUS; - verbose_printk(KERN_NOTICE HWC_x3(KERN_NOTICE)); + strerror = KERN_NOTICE HWC_x3(KERN_NOTICE); break; /* Performance Monitor Overflow */ case (SEQSTAT_HWERRCAUSE_PERF_FLOW): - verbose_printk(KERN_NOTICE HWC_x12(KERN_NOTICE)); + strerror = KERN_NOTICE HWC_x12(KERN_NOTICE); break; /* RAISE 5 instruction */ case (SEQSTAT_HWERRCAUSE_RAISE_5): @@ -564,7 +553,6 @@ asmlinkage void trap_c(struct pt_regs *fp) * if we get here we hit a reserved one, so panic */ default: - oops_in_progress = 1; info.si_code = ILL_ILLPARAOP; sig = SIGILL; verbose_printk(KERN_EMERG "Caught Unhandled Exception, code = %08lx\n", @@ -575,6 +563,16 @@ asmlinkage void trap_c(struct pt_regs *fp) BUG_ON(sig == 0); + /* If the fault was caused by a kernel thread, or interrupt handler + * we will kernel panic, so the system reboots. + */ + if (kernel_mode_regs(fp) || (current && !current->mm)) { + console_verbose(); + oops_in_progress = 1; + if (strerror) + verbose_printk(strerror); + } + if (sig != SIGTRAP) { dump_bfin_process(fp); dump_bfin_mem(fp); -- cgit v1.2.3 From f9ee3ab81c222219ad4467b75b406efe2616d8a4 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 8 Jun 2009 09:51:30 -0400 Subject: Blackfin: fix flag storage for irq funcs The IRQ functions take an "unsigned long" flags variable, not any other type, so fix the places where we use "int" or "long". Signed-off-by: Mike Frysinger --- arch/blackfin/include/asm/atomic.h | 16 ++++++++-------- arch/blackfin/include/asm/bitops.h | 3 ++- 2 files changed, 10 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/include/asm/atomic.h b/arch/blackfin/include/asm/atomic.h index 7bbf44e4ddf..b1d92f13ef9 100644 --- a/arch/blackfin/include/asm/atomic.h +++ b/arch/blackfin/include/asm/atomic.h @@ -90,7 +90,7 @@ static inline int atomic_test_mask(int mask, atomic_t *v) static inline void atomic_add(int i, atomic_t *v) { - long flags; + unsigned long flags; local_irq_save_hw(flags); v->counter += i; @@ -99,7 +99,7 @@ static inline void atomic_add(int i, atomic_t *v) static inline void atomic_sub(int i, atomic_t *v) { - long flags; + unsigned long flags; local_irq_save_hw(flags); v->counter -= i; @@ -110,7 +110,7 @@ static inline void atomic_sub(int i, atomic_t *v) static inline int atomic_add_return(int i, atomic_t *v) { int __temp = 0; - long flags; + unsigned long flags; local_irq_save_hw(flags); v->counter += i; @@ -124,7 +124,7 @@ static inline int atomic_add_return(int i, atomic_t *v) static inline int atomic_sub_return(int i, atomic_t *v) { int __temp = 0; - long flags; + unsigned long flags; local_irq_save_hw(flags); v->counter -= i; @@ -136,7 +136,7 @@ static inline int atomic_sub_return(int i, atomic_t *v) static inline void atomic_inc(volatile atomic_t *v) { - long flags; + unsigned long flags; local_irq_save_hw(flags); v->counter++; @@ -145,7 +145,7 @@ static inline void atomic_inc(volatile atomic_t *v) static inline void atomic_dec(volatile atomic_t *v) { - long flags; + unsigned long flags; local_irq_save_hw(flags); v->counter--; @@ -154,7 +154,7 @@ static inline void atomic_dec(volatile atomic_t *v) static inline void atomic_clear_mask(unsigned int mask, atomic_t *v) { - long flags; + unsigned long flags; local_irq_save_hw(flags); v->counter &= ~mask; @@ -163,7 +163,7 @@ static inline void atomic_clear_mask(unsigned int mask, atomic_t *v) static inline void atomic_set_mask(unsigned int mask, atomic_t *v) { - long flags; + unsigned long flags; local_irq_save_hw(flags); v->counter |= mask; diff --git a/arch/blackfin/include/asm/bitops.h b/arch/blackfin/include/asm/bitops.h index 21b036eadab..75fee2f7d9f 100644 --- a/arch/blackfin/include/asm/bitops.h +++ b/arch/blackfin/include/asm/bitops.h @@ -109,7 +109,8 @@ static inline void clear_bit(int nr, volatile unsigned long *addr) static inline void change_bit(int nr, volatile unsigned long *addr) { - int mask, flags; + int mask; + unsigned long flags; unsigned long *ADDR = (unsigned long *)addr; ADDR += nr >> 5; -- cgit v1.2.3 From 86f2008bf546af9a434f480710e8d33891616bf5 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Wed, 10 Jun 2009 08:42:41 +0000 Subject: Blackfin: fix deadlock in SMP IPI handler When a low priority interrupt (like ethernet) is triggered between 2 high priority IPI messages, a deadlock in disable_irq() is hit by the second IPI handler. This is because the second IPI message is queued within the first IPI handler, but the handler doesn't process all messages, and new ones are inserted rather than appended. So now we process all the pending messages, and append new ones to the pending list. URL: http://blackfin.uclinux.org/gf/tracker/5226 Signed-off-by: Sonic Zhang Signed-off-by: Mike Frysinger --- arch/blackfin/mach-common/smp.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c index c187da2448b..61840059dfa 100644 --- a/arch/blackfin/mach-common/smp.c +++ b/arch/blackfin/mach-common/smp.c @@ -144,7 +144,7 @@ static void ipi_call_function(unsigned int cpu, struct ipi_message *msg) static irqreturn_t ipi_handler(int irq, void *dev_instance) { - struct ipi_message *msg, *mg; + struct ipi_message *msg; struct ipi_message_queue *msg_queue; unsigned int cpu = smp_processor_id(); @@ -154,7 +154,8 @@ static irqreturn_t ipi_handler(int irq, void *dev_instance) msg_queue->count++; spin_lock(&msg_queue->lock); - list_for_each_entry_safe(msg, mg, &msg_queue->head, list) { + while (!list_empty(&msg_queue->head)) { + msg = list_entry(msg_queue->head.next, typeof(*msg), list); list_del(&msg->list); switch (msg->type) { case BFIN_IPI_RESCHEDULE: @@ -221,7 +222,7 @@ int smp_call_function(void (*func)(void *info), void *info, int wait) for_each_cpu_mask(cpu, callmap) { msg_queue = &per_cpu(ipi_msg_queue, cpu); spin_lock_irqsave(&msg_queue->lock, flags); - list_add(&msg->list, &msg_queue->head); + list_add_tail(&msg->list, &msg_queue->head); spin_unlock_irqrestore(&msg_queue->lock, flags); platform_send_ipi_cpu(cpu); } @@ -261,7 +262,7 @@ int smp_call_function_single(int cpuid, void (*func) (void *info), void *info, msg_queue = &per_cpu(ipi_msg_queue, cpu); spin_lock_irqsave(&msg_queue->lock, flags); - list_add(&msg->list, &msg_queue->head); + list_add_tail(&msg->list, &msg_queue->head); spin_unlock_irqrestore(&msg_queue->lock, flags); platform_send_ipi_cpu(cpu); @@ -292,7 +293,7 @@ void smp_send_reschedule(int cpu) msg_queue = &per_cpu(ipi_msg_queue, cpu); spin_lock_irqsave(&msg_queue->lock, flags); - list_add(&msg->list, &msg_queue->head); + list_add_tail(&msg->list, &msg_queue->head); spin_unlock_irqrestore(&msg_queue->lock, flags); platform_send_ipi_cpu(cpu); @@ -320,7 +321,7 @@ void smp_send_stop(void) for_each_cpu_mask(cpu, callmap) { msg_queue = &per_cpu(ipi_msg_queue, cpu); spin_lock_irqsave(&msg_queue->lock, flags); - list_add(&msg->list, &msg_queue->head); + list_add_tail(&msg->list, &msg_queue->head); spin_unlock_irqrestore(&msg_queue->lock, flags); platform_send_ipi_cpu(cpu); } -- cgit v1.2.3 From 54ebae7166275a618f0228138e67ff7d10a3b9d0 Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Wed, 10 Jun 2009 06:11:21 +0000 Subject: Blackfin: do not configure the UART early if on wrong processor Before we configure the early UART, check to make sure we are running on the expected processor - otherwise, we cause problems by configuring pins that don't exist (and causing an infinite loop of faults). Signed-off-by: Robin Getz Signed-off-by: Mike Frysinger --- arch/blackfin/kernel/early_printk.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/early_printk.c b/arch/blackfin/kernel/early_printk.c index 3302719173c..2ab56811841 100644 --- a/arch/blackfin/kernel/early_printk.c +++ b/arch/blackfin/kernel/early_printk.c @@ -202,11 +202,15 @@ asmlinkage void __init init_early_exception_vectors(void) asmlinkage void __init early_trap_c(struct pt_regs *fp, void *retaddr) { /* This can happen before the uart is initialized, so initialize - * the UART now + * the UART now (but only if we are running on the processor we think + * we are compiled for - otherwise we write to MMRs that don't exist, + * and cause other problems. Nothing comes out the UART, but it does + * end up in the __buf_log. */ - if (likely(early_console == NULL)) + if (likely(early_console == NULL) && CPUID == bfin_cpuid()) setup_early_printk(DEFAULT_EARLY_PORT); + printk(KERN_EMERG "Early panic\n"); dump_bfin_mem(fp); show_regs(fp); dump_bfin_trace_buffer(); -- cgit v1.2.3 From 53122693c3cef005495279835286c36c58e035e8 Mon Sep 17 00:00:00 2001 From: Yi Li Date: Fri, 5 Jun 2009 12:11:11 +0000 Subject: Blackfin: define SPI IRQ in board resources The Blackfin SPI driver can be driven by an IRQ now, so declare it in the board resources. Signed-off-by: Yi Li Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf518/boards/ezbrd.c | 10 ++++++++++ arch/blackfin/mach-bf527/boards/cm_bf527.c | 5 +++++ arch/blackfin/mach-bf527/boards/ezbrd.c | 5 +++++ arch/blackfin/mach-bf527/boards/ezkit.c | 5 +++++ arch/blackfin/mach-bf533/boards/H8606.c | 5 +++++ arch/blackfin/mach-bf533/boards/blackstamp.c | 5 +++++ arch/blackfin/mach-bf533/boards/cm_bf533.c | 5 +++++ arch/blackfin/mach-bf533/boards/ezkit.c | 5 +++++ arch/blackfin/mach-bf533/boards/stamp.c | 5 +++++ arch/blackfin/mach-bf537/boards/cm_bf537.c | 7 ++++++- arch/blackfin/mach-bf537/boards/minotaur.c | 5 +++++ arch/blackfin/mach-bf537/boards/pnav10.c | 7 ++++++- arch/blackfin/mach-bf537/boards/tcm_bf537.c | 5 +++++ arch/blackfin/mach-bf538/boards/ezkit.c | 10 ++++++++++ arch/blackfin/mach-bf548/boards/cm_bf548.c | 10 ++++++++++ arch/blackfin/mach-bf548/boards/ezkit.c | 10 ++++++++++ arch/blackfin/mach-bf561/boards/cm_bf561.c | 7 ++++++- arch/blackfin/mach-bf561/boards/ezkit.c | 5 +++++ 18 files changed, 113 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c index 62bba09bcce..8969a24cce7 100644 --- a/arch/blackfin/mach-bf518/boards/ezbrd.c +++ b/arch/blackfin/mach-bf518/boards/ezbrd.c @@ -369,6 +369,11 @@ static struct resource bfin_spi0_resource[] = { [1] = { .start = CH_SPI0, .end = CH_SPI0, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = IRQ_SPI0, + .end = IRQ_SPI0, .flags = IORESOURCE_IRQ, }, }; @@ -399,6 +404,11 @@ static struct resource bfin_spi1_resource[] = { [1] = { .start = CH_SPI1, .end = CH_SPI1, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = IRQ_SPI1, + .end = IRQ_SPI1, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c index 6d6f9effa0b..1eaf27ff722 100644 --- a/arch/blackfin/mach-bf527/boards/cm_bf527.c +++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c @@ -664,6 +664,11 @@ static struct resource bfin_spi0_resource[] = { [1] = { .start = CH_SPI, .end = CH_SPI, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = IRQ_SPI, + .end = IRQ_SPI, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c index 1435c5d38cd..9f9c0005dcf 100644 --- a/arch/blackfin/mach-bf527/boards/ezbrd.c +++ b/arch/blackfin/mach-bf527/boards/ezbrd.c @@ -467,6 +467,11 @@ static struct resource bfin_spi0_resource[] = { [1] = { .start = CH_SPI, .end = CH_SPI, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = IRQ_SPI, + .end = IRQ_SPI, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index 147edd1eb1a..3e5b7db6b06 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -723,6 +723,11 @@ static struct resource bfin_spi0_resource[] = { [1] = { .start = CH_SPI, .end = CH_SPI, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = IRQ_SPI, + .end = IRQ_SPI, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c index 895f213ea45..38cf8ffd6d7 100644 --- a/arch/blackfin/mach-bf533/boards/H8606.c +++ b/arch/blackfin/mach-bf533/boards/H8606.c @@ -266,6 +266,11 @@ static struct resource bfin_spi0_resource[] = { [1] = { .start = CH_SPI, .end = CH_SPI, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = IRQ_SPI, + .end = IRQ_SPI, .flags = IORESOURCE_IRQ, } }; diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c index 0765872a8ad..9ecdc361fa6 100644 --- a/arch/blackfin/mach-bf533/boards/blackstamp.c +++ b/arch/blackfin/mach-bf533/boards/blackstamp.c @@ -162,6 +162,11 @@ static struct resource bfin_spi0_resource[] = { [1] = { .start = CH_SPI, .end = CH_SPI, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = IRQ_SPI, + .end = IRQ_SPI, .flags = IORESOURCE_IRQ, } }; diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c index a727e538fa2..1443e92d8b6 100644 --- a/arch/blackfin/mach-bf533/boards/cm_bf533.c +++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c @@ -160,6 +160,11 @@ static struct resource bfin_spi0_resource[] = { [1] = { .start = CH_SPI, .end = CH_SPI, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = IRQ_SPI, + .end = IRQ_SPI, .flags = IORESOURCE_IRQ, } }; diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index 842f1c9c239..89a5ec4ca04 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -196,6 +196,11 @@ static struct resource bfin_spi0_resource[] = { [1] = { .start = CH_SPI, .end = CH_SPI, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = IRQ_SPI, + .end = IRQ_SPI, .flags = IORESOURCE_IRQ, } }; diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index e19c565ade1..a68ade8a3ca 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -299,6 +299,11 @@ static struct resource bfin_spi0_resource[] = { [1] = { .start = CH_SPI, .end = CH_SPI, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = IRQ_SPI, + .end = IRQ_SPI, .flags = IORESOURCE_IRQ, } }; diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c index 4fee1967312..2a87d1cfcd0 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c @@ -182,8 +182,13 @@ static struct resource bfin_spi0_resource[] = { [1] = { .start = CH_SPI, .end = CH_SPI, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = IRQ_SPI, + .end = IRQ_SPI, .flags = IORESOURCE_IRQ, - } + }, }; /* SPI controller data */ diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c index 3c159819e55..399f81da7b9 100644 --- a/arch/blackfin/mach-bf537/boards/minotaur.c +++ b/arch/blackfin/mach-bf537/boards/minotaur.c @@ -184,6 +184,11 @@ static struct resource bfin_spi0_resource[] = { [1] = { .start = CH_SPI, .end = CH_SPI, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = IRQ_SPI, + .end = IRQ_SPI, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index 26707ce39f2..838240f151f 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -398,8 +398,13 @@ static struct resource bfin_spi0_resource[] = { [1] = { .start = CH_SPI, .end = CH_SPI, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = IRQ_SPI, + .end = IRQ_SPI, .flags = IORESOURCE_IRQ, - } + }, }; /* SPI controller data */ diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c index 28057459120..e523e6e610d 100644 --- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c @@ -182,6 +182,11 @@ static struct resource bfin_spi0_resource[] = { [1] = { .start = CH_SPI, .end = CH_SPI, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = IRQ_SPI, + .end = IRQ_SPI, .flags = IORESOURCE_IRQ, } }; diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c index e37cb937888..57695b4c3c0 100644 --- a/arch/blackfin/mach-bf538/boards/ezkit.c +++ b/arch/blackfin/mach-bf538/boards/ezkit.c @@ -352,6 +352,11 @@ static struct resource bfin_spi0_resource[] = { [1] = { .start = CH_SPI0, .end = CH_SPI0, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = IRQ_SPI0, + .end = IRQ_SPI0, .flags = IORESOURCE_IRQ, } }; @@ -366,6 +371,11 @@ static struct resource bfin_spi1_resource[] = { [1] = { .start = CH_SPI1, .end = CH_SPI1, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = IRQ_SPI1, + .end = IRQ_SPI1, .flags = IORESOURCE_IRQ, } }; diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c index f53ad682530..f5a3c30a41b 100644 --- a/arch/blackfin/mach-bf548/boards/cm_bf548.c +++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c @@ -612,6 +612,11 @@ static struct resource bfin_spi0_resource[] = { [1] = { .start = CH_SPI0, .end = CH_SPI0, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = IRQ_SPI0, + .end = IRQ_SPI0, .flags = IORESOURCE_IRQ, } }; @@ -626,6 +631,11 @@ static struct resource bfin_spi1_resource[] = { [1] = { .start = CH_SPI1, .end = CH_SPI1, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = IRQ_SPI1, + .end = IRQ_SPI1, .flags = IORESOURCE_IRQ, } }; diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index add5a17452c..a4b1ee819c5 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -741,6 +741,11 @@ static struct resource bfin_spi0_resource[] = { [1] = { .start = CH_SPI0, .end = CH_SPI0, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = IRQ_SPI0, + .end = IRQ_SPI0, .flags = IORESOURCE_IRQ, } }; @@ -755,6 +760,11 @@ static struct resource bfin_spi1_resource[] = { [1] = { .start = CH_SPI1, .end = CH_SPI1, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = IRQ_SPI1, + .end = IRQ_SPI1, .flags = IORESOURCE_IRQ, } }; diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c index 0dd9685e5d5..0c9d72c5f5b 100644 --- a/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c @@ -177,8 +177,13 @@ static struct resource bfin_spi0_resource[] = { [1] = { .start = CH_SPI, .end = CH_SPI, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = IRQ_SPI, + .end = IRQ_SPI, .flags = IORESOURCE_IRQ, - } + }, }; /* SPI controller data */ diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index 0e2178a1aec..b5ef7ff7b7b 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -304,6 +304,11 @@ static struct resource bfin_spi0_resource[] = { [1] = { .start = CH_SPI, .end = CH_SPI, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = IRQ_SPI, + .end = IRQ_SPI, .flags = IORESOURCE_IRQ, } }; -- cgit v1.2.3 From a427293f84ea2491fbdcfbddadc2a2f68e0d2969 Mon Sep 17 00:00:00 2001 From: Graf Yang Date: Wed, 10 Jun 2009 08:45:12 +0000 Subject: Blackfin: bf518f-ezbrd: fix SPI CS for SPI flash The SPI flash on the BF518F-EZBRD board is actually hooked up to CS2, not CS1, so make sure the resources are correct. URL: http://blackfin.uclinux.org/gf/tracker/5220 Signed-off-by: Graf Yang Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf518/boards/ezbrd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c index 8969a24cce7..1382f038235 100644 --- a/arch/blackfin/mach-bf518/boards/ezbrd.c +++ b/arch/blackfin/mach-bf518/boards/ezbrd.c @@ -246,7 +246,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .modalias = "m25p80", /* Name of spi_driver for this device */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, /* Framework bus number */ - .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ + .chip_select = 2, /* On BF518F-EZBRD it's SPI0_SSEL2 */ .platform_data = &bfin_spi_flash_data, .controller_data = &spi_flash_chip_info, .mode = SPI_MODE_3, -- cgit v1.2.3 From 4f84b6e0bb9a7d92c791ba3607674c98f69418cb Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 10 Jun 2009 20:45:48 -0400 Subject: Blackfin: bf537-stamp: update ADP5520 resources The ADP5520 hooks up to PF7 rather than PG0. Signed-off-by: Michael Hennerich Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf537/boards/stamp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index dfb5036f8a6..ff7228caa7d 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -1345,7 +1345,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE) { I2C_BOARD_INFO("pmic-adp5520", 0x32), - .irq = IRQ_PF7, + .irq = IRQ_PG0, .platform_data = (void *)&adp5520_pdev_data, }, #endif -- cgit v1.2.3 From 6640cfa82b77fa63f6d3fc284dbd3ab957842936 Mon Sep 17 00:00:00 2001 From: Yi Li Date: Thu, 11 Jun 2009 01:51:57 -0400 Subject: Blackfin: update aedos-ipipe code to upstream 1.10-00 Signed-off-by: Yi Li Signed-off-by: Mike Frysinger --- arch/blackfin/include/asm/ipipe.h | 28 ++++++++++++++------------ arch/blackfin/kernel/ipipe.c | 42 ++++++++++++++++++++------------------- 2 files changed, 37 insertions(+), 33 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/include/asm/ipipe.h b/arch/blackfin/include/asm/ipipe.h index 51d0bf5e289..bbe1c3726b6 100644 --- a/arch/blackfin/include/asm/ipipe.h +++ b/arch/blackfin/include/asm/ipipe.h @@ -35,10 +35,10 @@ #include #include -#define IPIPE_ARCH_STRING "1.9-01" +#define IPIPE_ARCH_STRING "1.10-00" #define IPIPE_MAJOR_NUMBER 1 -#define IPIPE_MINOR_NUMBER 9 -#define IPIPE_PATCH_NUMBER 1 +#define IPIPE_MINOR_NUMBER 10 +#define IPIPE_PATCH_NUMBER 0 #ifdef CONFIG_SMP #error "I-pipe/blackfin: SMP not implemented" @@ -54,10 +54,11 @@ do { \ #define task_hijacked(p) \ ({ \ - int __x__ = ipipe_current_domain != ipipe_root_domain; \ - /* We would need to clear the SYNC flag for the root domain */ \ - /* over the current processor in SMP mode. */ \ - local_irq_enable_hw(); __x__; \ + int __x__ = __ipipe_root_domain_p; \ + __clear_bit(IPIPE_SYNC_FLAG, &ipipe_root_cpudom_var(status)); \ + if (__x__) \ + local_irq_enable_hw(); \ + !__x__; \ }) struct ipipe_domain; @@ -179,23 +180,24 @@ static inline unsigned long __ipipe_ffnz(unsigned long ul) #define __ipipe_run_isr(ipd, irq) \ do { \ - if (ipd == ipipe_root_domain) { \ + if (!__ipipe_pipeline_head_p(ipd)) \ local_irq_enable_hw(); \ - if (ipipe_virtual_irq_p(irq)) \ + if (ipd == ipipe_root_domain) { \ + if (unlikely(ipipe_virtual_irq_p(irq))) { \ + irq_enter(); \ ipd->irqs[irq].handler(irq, ipd->irqs[irq].cookie); \ - else \ + irq_exit(); \ + } else \ ipd->irqs[irq].handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs)); \ - local_irq_disable_hw(); \ } else { \ __clear_bit(IPIPE_SYNC_FLAG, &ipipe_cpudom_var(ipd, status)); \ - local_irq_enable_nohead(ipd); \ ipd->irqs[irq].handler(irq, ipd->irqs[irq].cookie); \ /* Attempt to exit the outer interrupt level before \ * starting the deferred IRQ processing. */ \ - local_irq_disable_nohead(ipd); \ __ipipe_run_irqtail(); \ __set_bit(IPIPE_SYNC_FLAG, &ipipe_cpudom_var(ipd, status)); \ } \ + local_irq_disable_hw(); \ } while (0) #define __ipipe_syscall_watched_p(p, sc) \ diff --git a/arch/blackfin/kernel/ipipe.c b/arch/blackfin/kernel/ipipe.c index 5fc424803a1..d8cde1fc5cb 100644 --- a/arch/blackfin/kernel/ipipe.c +++ b/arch/blackfin/kernel/ipipe.c @@ -99,7 +99,7 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs) * interrupt. */ m_ack = (regs == NULL || irq == IRQ_SYSTMR || irq == IRQ_CORETMR); - this_domain = ipipe_current_domain; + this_domain = __ipipe_current_domain; if (unlikely(test_bit(IPIPE_STICKY_FLAG, &this_domain->irqs[irq].control))) head = &this_domain->p_link; @@ -212,7 +212,9 @@ void __ipipe_unstall_root_raw(void) int __ipipe_syscall_root(struct pt_regs *regs) { + struct ipipe_percpu_domain_data *p; unsigned long flags; + int ret; /* * We need to run the IRQ tail hook whenever we don't @@ -231,29 +233,31 @@ int __ipipe_syscall_root(struct pt_regs *regs) /* * This routine either returns: * 0 -- if the syscall is to be passed to Linux; - * 1 -- if the syscall should not be passed to Linux, and no + * >0 -- if the syscall should not be passed to Linux, and no * tail work should be performed; - * -1 -- if the syscall should not be passed to Linux but the + * <0 -- if the syscall should not be passed to Linux but the * tail work has to be performed (for handling signals etc). */ - if (__ipipe_event_monitored_p(IPIPE_EVENT_SYSCALL) && - __ipipe_dispatch_event(IPIPE_EVENT_SYSCALL, regs) > 0) { - if (ipipe_root_domain_p && !in_atomic()) { - /* - * Sync pending VIRQs before _TIF_NEED_RESCHED - * is tested. - */ - local_irq_save_hw(flags); - if ((ipipe_root_cpudom_var(irqpend_himask) & IPIPE_IRQMASK_VIRT) != 0) - __ipipe_sync_pipeline(IPIPE_IRQMASK_VIRT); - local_irq_restore_hw(flags); - return -1; - } + if (!__ipipe_event_monitored_p(IPIPE_EVENT_SYSCALL)) + return 0; + + ret = __ipipe_dispatch_event(IPIPE_EVENT_SYSCALL, regs); + + local_irq_save_hw(flags); + + if (!__ipipe_root_domain_p) { + local_irq_restore_hw(flags); return 1; } - return 0; + p = ipipe_root_cpudom_ptr(); + if ((p->irqpend_himask & IPIPE_IRQMASK_VIRT) != 0) + __ipipe_sync_pipeline(IPIPE_IRQMASK_VIRT); + + local_irq_restore_hw(flags); + + return -ret; } unsigned long ipipe_critical_enter(void (*syncfn) (void)) @@ -329,9 +333,7 @@ asmlinkage void __ipipe_sync_root(void) void ___ipipe_sync_pipeline(unsigned long syncmask) { - struct ipipe_domain *ipd = ipipe_current_domain; - - if (ipd == ipipe_root_domain) { + if (__ipipe_root_domain_p) { if (test_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status))) return; } -- cgit v1.2.3 From 7a8b71db9dbb87640ffabcf42285781a808de342 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 5 Jun 2009 20:41:17 -0400 Subject: Blackfin: bf548-ezkit: update smsc911x resources The older smsc911x driver made platform data optional, but the newer one always requires it, so add proper settings to the BF548-EZKIT. Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf548/boards/ezkit.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch') diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index a4b1ee819c5..805a57b5e65 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -396,6 +396,8 @@ static struct platform_device bfin_sir3_device = { #endif #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#include + static struct resource smsc911x_resources[] = { { .name = "smsc911x-memory", @@ -409,11 +411,22 @@ static struct resource smsc911x_resources[] = { .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, }, }; + +static struct smsc911x_platform_config smsc911x_config = { + .flags = SMSC911X_USE_32BIT, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .phy_interface = PHY_INTERFACE_MODE_MII, +}; + static struct platform_device smsc911x_device = { .name = "smsc911x", .id = 0, .num_resources = ARRAY_SIZE(smsc911x_resources), .resource = smsc911x_resources, + .dev = { + .platform_data = &smsc911x_config, + }, }; #endif -- cgit v1.2.3 From bac7d89ebe64eca9ce63ee6a5e4341d252671467 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Sun, 7 Jun 2009 03:46:06 -0400 Subject: Blackfin: convert Kconfig style to def_bool Makes the file easier to read when there isn't so much clutter. Signed-off-by: Mike Frysinger --- arch/blackfin/Kconfig | 36 ++++++++++++------------------------ 1 file changed, 12 insertions(+), 24 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 74cdcf39b41..2cf455a7c01 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -6,24 +6,19 @@ mainmenu "Blackfin Kernel Configuration" config MMU - bool - default n + def_bool n config FPU - bool - default n + def_bool n config RWSEM_GENERIC_SPINLOCK - bool - default y + def_bool y config RWSEM_XCHGADD_ALGORITHM - bool - default n + def_bool n config BLACKFIN - bool - default y + def_bool y select HAVE_IDE select HAVE_OPROFILE select ARCH_WANT_OPTIONAL_GPIOLIB @@ -33,36 +28,29 @@ config GENERIC_BUG depends on BUG config ZONE_DMA - bool - default y + def_bool y config GENERIC_FIND_NEXT_BIT - bool - default y + def_bool y config GENERIC_HWEIGHT - bool - default y + def_bool y config GENERIC_HARDIRQS - bool - default y + def_bool y config GENERIC_IRQ_PROBE - bool - default y + def_bool y config GENERIC_GPIO - bool - default y + def_bool y config FORCE_MAX_ZONEORDER int default "14" config GENERIC_CALIBRATE_DELAY - bool - default y + def_bool y source "init/Kconfig" -- cgit v1.2.3 From 538067c822e2512d9a165c71c0c5722168470304 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Sun, 7 Jun 2009 03:47:01 -0400 Subject: Blackfin: add support for bzip2/lzma compressed kernel images Since U-Boot can support these compression types, add appropriate targets to the Blackfin boot files. Signed-off-by: Mike Frysinger --- arch/blackfin/Kconfig | 3 +++ arch/blackfin/Makefile | 7 +++++-- arch/blackfin/boot/.gitignore | 3 ++- arch/blackfin/boot/Makefile | 31 ++++++++++++++++++++++++------- 4 files changed, 34 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 2cf455a7c01..6ae9a0306b3 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -20,6 +20,9 @@ config RWSEM_XCHGADD_ALGORITHM config BLACKFIN def_bool y select HAVE_IDE + select HAVE_KERNEL_GZIP + select HAVE_KERNEL_BZIP2 + select HAVE_KERNEL_LZMA select HAVE_OPROFILE select ARCH_WANT_OPTIONAL_GPIOLIB diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile index d54c8283825..6f9533c3d75 100644 --- a/arch/blackfin/Makefile +++ b/arch/blackfin/Makefile @@ -137,7 +137,7 @@ archclean: INSTALL_PATH ?= /tftpboot boot := arch/$(ARCH)/boot -BOOT_TARGETS = vmImage +BOOT_TARGETS = vmImage vmImage.bz2 vmImage.gz vmImage.lzma PHONY += $(BOOT_TARGETS) install KBUILD_IMAGE := $(boot)/vmImage @@ -150,7 +150,10 @@ install: $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) install define archhelp - echo '* vmImage - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage)' + echo '* vmImage - Alias to selected kernel format (vmImage.gz by default)' + echo ' vmImage.bz2 - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.bz2)' + echo '* vmImage.gz - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.gz)' + echo ' vmImage.lzma - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.lzma)' echo ' install - Install kernel using' echo ' (your) ~/bin/$(CROSS_COMPILE)installkernel or' echo ' (distribution) PATH: $(CROSS_COMPILE)installkernel or' diff --git a/arch/blackfin/boot/.gitignore b/arch/blackfin/boot/.gitignore index 3ae03994b88..229e5080867 100644 --- a/arch/blackfin/boot/.gitignore +++ b/arch/blackfin/boot/.gitignore @@ -1 +1,2 @@ -+vmImage +vmImage* +vmlinux* diff --git a/arch/blackfin/boot/Makefile b/arch/blackfin/boot/Makefile index e028d13481a..3ab6f23561d 100644 --- a/arch/blackfin/boot/Makefile +++ b/arch/blackfin/boot/Makefile @@ -8,24 +8,41 @@ MKIMAGE := $(srctree)/scripts/mkuboot.sh -targets := vmImage -extra-y += vmlinux.bin vmlinux.gz +targets := vmImage vmImage.bz2 vmImage.gz vmImage.lzma +extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma quiet_cmd_uimage = UIMAGE $@ cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(ARCH) -O linux -T kernel \ - -C gzip -n 'Linux-$(KERNELRELEASE)' -a $(CONFIG_BOOT_LOAD) \ + -C $(2) -n 'Linux-$(KERNELRELEASE)' -a $(CONFIG_BOOT_LOAD) \ -e $(shell $(NM) vmlinux | awk '$$NF == "__start" {print $$1}') \ -d $< $@ $(obj)/vmlinux.bin: vmlinux FORCE $(call if_changed,objcopy) -$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE +$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE $(call if_changed,gzip) -$(obj)/vmImage: $(obj)/vmlinux.gz - $(call if_changed,uimage) - @$(kecho) 'Kernel: $@ is ready' +$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE + $(call if_changed,bzip2) + +$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE + $(call if_changed,lzma) + +$(obj)/vmImage.bz2: $(obj)/vmlinux.bin.bz2 + $(call if_changed,uimage,bzip2) + +$(obj)/vmImage.gz: $(obj)/vmlinux.bin.gz + $(call if_changed,uimage,gzip) + +$(obj)/vmImage.lzma: $(obj)/vmlinux.bin.lzma + $(call if_changed,uimage,lzma) + +suffix-$(CONFIG_KERNEL_GZIP) := gz +suffix-$(CONFIG_KERNEL_BZIP2) := bz2 +suffix-$(CONFIG_KERNEL_LZMA) := lzma +$(obj)/vmImage: $(obj)/vmImage.$(suffix-y) + @ln -sf $(notdir $<) $@ install: sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(BOOTIMAGE) System.map "$(INSTALL_PATH)" -- cgit v1.2.3 From 8f86001f76609f70bfcce34e7e2a11860e012ace Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 8 Jun 2009 12:49:48 -0400 Subject: Blackfin: add support for irqflags This converts the irq handling in the Blackfin arch from the old irq.h / system.h method to the new irqflags.h. A stepping stone on the way to other tracing functionality. Signed-off-by: Mike Frysinger --- arch/blackfin/Kconfig | 3 + arch/blackfin/include/asm/irq.h | 271 ++--------------------------------- arch/blackfin/include/asm/irqflags.h | 63 ++++++++ arch/blackfin/include/asm/system.h | 4 +- 4 files changed, 77 insertions(+), 264 deletions(-) create mode 100644 arch/blackfin/include/asm/irqflags.h (limited to 'arch') diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 6ae9a0306b3..d68cb0dc583 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -55,6 +55,9 @@ config FORCE_MAX_ZONEORDER config GENERIC_CALIBRATE_DELAY def_bool y +config TRACE_IRQFLAGS_SUPPORT + def_bool y + source "init/Kconfig" source "kernel/Kconfig.preempt" diff --git a/arch/blackfin/include/asm/irq.h b/arch/blackfin/include/asm/irq.h index 7645e85a5f6..400bdd52ce8 100644 --- a/arch/blackfin/include/asm/irq.h +++ b/arch/blackfin/include/asm/irq.h @@ -17,270 +17,17 @@ #ifndef _BFIN_IRQ_H_ #define _BFIN_IRQ_H_ -/* SYS_IRQS and NR_IRQS are defined in */ -#include -#include -#include - -#ifdef CONFIG_SMP -/* Forward decl needed due to cdef inter dependencies */ -static inline uint32_t __pure bfin_dspid(void); -# define blackfin_core_id() (bfin_dspid() & 0xff) -# define bfin_irq_flags cpu_pda[blackfin_core_id()].imask -#else -extern unsigned long bfin_irq_flags; -#endif - -#ifdef CONFIG_IPIPE - -#include +#include -void __ipipe_unstall_root(void); - -void __ipipe_restore_root(unsigned long flags); - -#ifdef CONFIG_DEBUG_HWERR -# define __all_masked_irq_flags 0x3f -# define __save_and_cli_hw(x) \ - __asm__ __volatile__( \ - "cli %0;" \ - "sti %1;" \ - : "=&d"(x) \ - : "d" (0x3F) \ - ) -#else -# define __all_masked_irq_flags 0x1f -# define __save_and_cli_hw(x) \ - __asm__ __volatile__( \ - "cli %0;" \ - : "=&d"(x) \ - ) -#endif - -#define irqs_enabled_from_flags_hw(x) ((x) != __all_masked_irq_flags) -#define raw_irqs_disabled_flags(flags) (!irqs_enabled_from_flags_hw(flags)) -#define local_test_iflag_hw(x) irqs_enabled_from_flags_hw(x) - -#define local_save_flags(x) \ - do { \ - (x) = __ipipe_test_root() ? \ - __all_masked_irq_flags : bfin_irq_flags; \ - barrier(); \ - } while (0) - -#define local_irq_save(x) \ - do { \ - (x) = __ipipe_test_and_stall_root() ? \ - __all_masked_irq_flags : bfin_irq_flags; \ - barrier(); \ - } while (0) - -static inline void local_irq_restore(unsigned long x) -{ - barrier(); - __ipipe_restore_root(x == __all_masked_irq_flags); -} - -#define local_irq_disable() \ - do { \ - __ipipe_stall_root(); \ - barrier(); \ - } while (0) - -static inline void local_irq_enable(void) -{ - barrier(); - __ipipe_unstall_root(); -} - -#define irqs_disabled() __ipipe_test_root() - -#define local_save_flags_hw(x) \ - __asm__ __volatile__( \ - "cli %0;" \ - "sti %0;" \ - : "=d"(x) \ - ) - -#define irqs_disabled_hw() \ - ({ \ - unsigned long flags; \ - local_save_flags_hw(flags); \ - !irqs_enabled_from_flags_hw(flags); \ - }) - -static inline unsigned long raw_mangle_irq_bits(int virt, unsigned long real) -{ - /* Merge virtual and real interrupt mask bits into a single - 32bit word. */ - return (real & ~(1 << 31)) | ((virt != 0) << 31); -} - -static inline int raw_demangle_irq_bits(unsigned long *x) -{ - int virt = (*x & (1 << 31)) != 0; - *x &= ~(1L << 31); - return virt; -} - -#ifdef CONFIG_IPIPE_TRACE_IRQSOFF - -#define local_irq_disable_hw() \ - do { \ - int _tmp_dummy; \ - if (!irqs_disabled_hw()) \ - ipipe_trace_begin(0x80000000); \ - __asm__ __volatile__ ("cli %0;" : "=d" (_tmp_dummy) : ); \ - } while (0) - -#define local_irq_enable_hw() \ - do { \ - if (irqs_disabled_hw()) \ - ipipe_trace_end(0x80000000); \ - __asm__ __volatile__ ("sti %0;" : : "d"(bfin_irq_flags)); \ - } while (0) - -#define local_irq_save_hw(x) \ - do { \ - __save_and_cli_hw(x); \ - if (local_test_iflag_hw(x)) \ - ipipe_trace_begin(0x80000001); \ - } while (0) - -#define local_irq_restore_hw(x) \ - do { \ - if (local_test_iflag_hw(x)) { \ - ipipe_trace_end(0x80000001); \ - local_irq_enable_hw_notrace(); \ - } \ - } while (0) - -#define local_irq_disable_hw_notrace() \ - do { \ - int _tmp_dummy; \ - __asm__ __volatile__ ("cli %0;" : "=d" (_tmp_dummy) : ); \ - } while (0) - -#define local_irq_enable_hw_notrace() \ - __asm__ __volatile__( \ - "sti %0;" \ - : \ - : "d"(bfin_irq_flags) \ - ) - -#define local_irq_save_hw_notrace(x) __save_and_cli_hw(x) - -#define local_irq_restore_hw_notrace(x) \ - do { \ - if (local_test_iflag_hw(x)) \ - local_irq_enable_hw_notrace(); \ - } while (0) - -#else /* CONFIG_IPIPE_TRACE_IRQSOFF */ - -#define local_irq_enable_hw() \ - __asm__ __volatile__( \ - "sti %0;" \ - : \ - : "d"(bfin_irq_flags) \ - ) - -#define local_irq_disable_hw() \ - do { \ - int _tmp_dummy; \ - __asm__ __volatile__ ( \ - "cli %0;" \ - : "=d" (_tmp_dummy)); \ - } while (0) - -#define local_irq_restore_hw(x) \ - do { \ - if (irqs_enabled_from_flags_hw(x)) \ - local_irq_enable_hw(); \ - } while (0) - -#define local_irq_save_hw(x) __save_and_cli_hw(x) - -#define local_irq_disable_hw_notrace() local_irq_disable_hw() -#define local_irq_enable_hw_notrace() local_irq_enable_hw() -#define local_irq_save_hw_notrace(x) local_irq_save_hw(x) -#define local_irq_restore_hw_notrace(x) local_irq_restore_hw(x) - -#endif /* CONFIG_IPIPE_TRACE_IRQSOFF */ - -#else /* !CONFIG_IPIPE */ - -/* - * Interrupt configuring macros. - */ -#define local_irq_disable() \ - do { \ - int __tmp_dummy; \ - __asm__ __volatile__( \ - "cli %0;" \ - : "=d" (__tmp_dummy) \ - ); \ - } while (0) - -#define local_irq_enable() \ - __asm__ __volatile__( \ - "sti %0;" \ - : \ - : "d" (bfin_irq_flags) \ - ) - -#ifdef CONFIG_DEBUG_HWERR -# define __save_and_cli(x) \ - __asm__ __volatile__( \ - "cli %0;" \ - "sti %1;" \ - : "=&d" (x) \ - : "d" (0x3F) \ - ) -#else -# define __save_and_cli(x) \ - __asm__ __volatile__( \ - "cli %0;" \ - : "=&d" (x) \ - ) -#endif - -#define local_save_flags(x) \ - __asm__ __volatile__( \ - "cli %0;" \ - "sti %0;" \ - : "=d" (x) \ - ) - -#ifdef CONFIG_DEBUG_HWERR -#define irqs_enabled_from_flags(x) (((x) & ~0x3f) != 0) -#else -#define irqs_enabled_from_flags(x) ((x) != 0x1f) -#endif - -#define local_irq_restore(x) \ - do { \ - if (irqs_enabled_from_flags(x)) \ - local_irq_enable(); \ - } while (0) - -/* For spinlocks etc */ -#define local_irq_save(x) __save_and_cli(x) - -#define irqs_disabled() \ -({ \ - unsigned long flags; \ - local_save_flags(flags); \ - !irqs_enabled_from_flags(flags); \ -}) - -#define local_irq_save_hw(x) local_irq_save(x) -#define local_irq_restore_hw(x) local_irq_restore(x) -#define local_irq_enable_hw() local_irq_enable() -#define local_irq_disable_hw() local_irq_disable() -#define irqs_disabled_hw() irqs_disabled() +/* SYS_IRQS and NR_IRQS are defined in */ +#include -#endif /* !CONFIG_IPIPE */ +/* Xenomai IPIPE helpers */ +#define local_irq_restore_hw(x) local_irq_restore(x) +#define local_irq_save_hw(x) local_irq_save(x) +#define local_irq_enable_hw(x) local_irq_enable(x) +#define local_irq_disable_hw(x) local_irq_disable(x) +#define irqs_disabled_hw(x) irqs_disabled(x) #if ANOMALY_05000244 && defined(CONFIG_BFIN_ICACHE) # define NOP_PAD_ANOMALY_05000244 "nop; nop;" diff --git a/arch/blackfin/include/asm/irqflags.h b/arch/blackfin/include/asm/irqflags.h new file mode 100644 index 00000000000..139cba4651b --- /dev/null +++ b/arch/blackfin/include/asm/irqflags.h @@ -0,0 +1,63 @@ +/* + * interface to Blackfin CEC + * + * Copyright 2009 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +#ifndef __ASM_BFIN_IRQFLAGS_H__ +#define __ASM_BFIN_IRQFLAGS_H__ + +#ifdef CONFIG_SMP +# include +# include +/* Forward decl needed due to cdef inter dependencies */ +static inline uint32_t __pure bfin_dspid(void); +# define blackfin_core_id() (bfin_dspid() & 0xff) +# define bfin_irq_flags cpu_pda[blackfin_core_id()].imask +#else +extern unsigned long bfin_irq_flags; +#endif + +static inline void bfin_sti(unsigned long flags) +{ + asm volatile("sti %0;" : : "d" (flags)); +} + +static inline unsigned long bfin_cli(void) +{ + unsigned long flags; + asm volatile("cli %0;" : "=d" (flags)); + return flags; +} + +static inline void raw_local_irq_disable(void) +{ + bfin_cli(); +} +static inline void raw_local_irq_enable(void) +{ + bfin_sti(bfin_irq_flags); +} + +#define raw_local_save_flags(flags) do { (flags) = bfin_read_IMASK(); } while (0) + +#define raw_irqs_disabled_flags(flags) (((flags) & ~0x3f) == 0) + +static inline void raw_local_irq_restore(unsigned long flags) +{ + if (!raw_irqs_disabled_flags(flags)) + raw_local_irq_enable(); +} + +static inline unsigned long __raw_local_irq_save(void) +{ + unsigned long flags = bfin_cli(); +#ifdef CONFIG_DEBUG_HWERR + bfin_sti(0x3f); +#endif + return flags; +} +#define raw_local_irq_save(flags) do { (flags) = __raw_local_irq_save(); } while (0) + +#endif diff --git a/arch/blackfin/include/asm/system.h b/arch/blackfin/include/asm/system.h index a4c8254bec5..294dbda2416 100644 --- a/arch/blackfin/include/asm/system.h +++ b/arch/blackfin/include/asm/system.h @@ -35,10 +35,10 @@ #define _BLACKFIN_SYSTEM_H #include -#include +#include #include +#include #include -#include #include /* -- cgit v1.2.3 From e38eb89210ce7171291e4164c24b8d1e6c5385ea Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 8 Jun 2009 18:11:21 -0400 Subject: Blackfin: punt unused/wrong mutex-dec.h Looks like the mutex-dec.h header file was incorrectly copied into the Blackfin asm path. Nothing uses it, so punt it. Signed-off-by: Mike Frysinger --- arch/blackfin/include/asm/mutex-dec.h | 112 ---------------------------------- 1 file changed, 112 deletions(-) delete mode 100644 arch/blackfin/include/asm/mutex-dec.h (limited to 'arch') diff --git a/arch/blackfin/include/asm/mutex-dec.h b/arch/blackfin/include/asm/mutex-dec.h deleted file mode 100644 index 0134151656a..00000000000 --- a/arch/blackfin/include/asm/mutex-dec.h +++ /dev/null @@ -1,112 +0,0 @@ -/* - * include/asm-generic/mutex-dec.h - * - * Generic implementation of the mutex fastpath, based on atomic - * decrement/increment. - */ -#ifndef _ASM_GENERIC_MUTEX_DEC_H -#define _ASM_GENERIC_MUTEX_DEC_H - -/** - * __mutex_fastpath_lock - try to take the lock by moving the count - * from 1 to a 0 value - * @count: pointer of type atomic_t - * @fail_fn: function to call if the original value was not 1 - * - * Change the count from 1 to a value lower than 1, and call if - * it wasn't 1 originally. This function MUST leave the value lower than - * 1 even when the "1" assertion wasn't true. - */ -static inline void -__mutex_fastpath_lock(atomic_t *count, fastcall void (*fail_fn)(atomic_t *)) -{ - if (unlikely(atomic_dec_return(count) < 0)) - fail_fn(count); - else - smp_mb(); -} - -/** - * __mutex_fastpath_lock_retval - try to take the lock by moving the count - * from 1 to a 0 value - * @count: pointer of type atomic_t - * @fail_fn: function to call if the original value was not 1 - * - * Change the count from 1 to a value lower than 1, and call if - * it wasn't 1 originally. This function returns 0 if the fastpath succeeds, - * or anything the slow path function returns. - */ -static inline int -__mutex_fastpath_lock_retval(atomic_t *count, fastcall int (*fail_fn)(atomic_t *)) -{ - if (unlikely(atomic_dec_return(count) < 0)) - return fail_fn(count); - else { - smp_mb(); - return 0; - } -} - -/** - * __mutex_fastpath_unlock - try to promote the count from 0 to 1 - * @count: pointer of type atomic_t - * @fail_fn: function to call if the original value was not 0 - * - * Try to promote the count from 0 to 1. If it wasn't 0, call . - * In the failure case, this function is allowed to either set the value to - * 1, or to set it to a value lower than 1. - * - * If the implementation sets it to a value of lower than 1, then the - * __mutex_slowpath_needs_to_unlock() macro needs to return 1, it needs - * to return 0 otherwise. - */ -static inline void -__mutex_fastpath_unlock(atomic_t *count, fastcall void (*fail_fn)(atomic_t *)) -{ - smp_mb(); - if (unlikely(atomic_inc_return(count) <= 0)) - fail_fn(count); -} - -#define __mutex_slowpath_needs_to_unlock() 1 - -/** - * __mutex_fastpath_trylock - try to acquire the mutex, without waiting - * - * @count: pointer of type atomic_t - * @fail_fn: fallback function - * - * Change the count from 1 to a value lower than 1, and return 0 (failure) - * if it wasn't 1 originally, or return 1 (success) otherwise. This function - * MUST leave the value lower than 1 even when the "1" assertion wasn't true. - * Additionally, if the value was < 0 originally, this function must not leave - * it to 0 on failure. - * - * If the architecture has no effective trylock variant, it should call the - * spinlock-based trylock variant unconditionally. - */ -static inline int -__mutex_fastpath_trylock(atomic_t *count, int (*fail_fn)(atomic_t *)) -{ - /* - * We have two variants here. The cmpxchg based one is the best one - * because it never induce a false contention state. It is included - * here because architectures using the inc/dec algorithms over the - * xchg ones are much more likely to support cmpxchg natively. - * - * If not we fall back to the spinlock based variant - that is - * just as efficient (and simpler) as a 'destructive' probing of - * the mutex state would be. - */ -#ifdef __HAVE_ARCH_CMPXCHG - if (likely(atomic_cmpxchg(count, 1, 0) == 1)) { - smp_mb(); - return 1; - } - return 0; -#else - return fail_fn(count); -#endif -} - -#endif -- cgit v1.2.3 From 5203fa82f3907a9c3357f84aa1cdfb57e55cc175 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 8 Jun 2009 18:40:28 -0400 Subject: Blackfin: move custom sections into sections.h The Blackfin arch has a bunch of custom section markings for its on-chip regions, but they aren't declared in the right header. Signed-off-by: Mike Frysinger --- arch/blackfin/include/asm/bfin-global.h | 11 +---------- arch/blackfin/include/asm/sections.h | 11 +++++++++++ 2 files changed, 12 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/include/asm/bfin-global.h b/arch/blackfin/include/asm/bfin-global.h index daffc0684e7..e39277ea43e 100644 --- a/arch/blackfin/include/asm/bfin-global.h +++ b/arch/blackfin/include/asm/bfin-global.h @@ -31,7 +31,7 @@ #ifndef __ASSEMBLY__ -#include +#include #include #include #include @@ -99,15 +99,6 @@ extern const char bfin_board_name[]; extern unsigned long bfin_sic_iwr[]; extern unsigned vr_wakeup; extern u16 _bfin_swrst; /* shadow for Software Reset Register (SWRST) */ -extern unsigned long _ramstart, _ramend, _rambase; -extern unsigned long memory_start, memory_end, physical_mem_end; -extern char _stext_l1[], _etext_l1[], _sdata_l1[], _edata_l1[], _sbss_l1[], - _ebss_l1[], _l1_lma_start[], _sdata_b_l1[], _sbss_b_l1[], _ebss_b_l1[], - _stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[], _sbss_l2[], - _ebss_l2[], _l2_lma_start[]; - -/* only used when MTD_UCLINUX */ -extern unsigned long memory_mtd_start, memory_mtd_end, mtd_size; #ifdef CONFIG_BFIN_ICACHE_LOCK extern void cache_grab_lock(int way); diff --git a/arch/blackfin/include/asm/sections.h b/arch/blackfin/include/asm/sections.h index 1443c3353a8..e7fd0ecd73f 100644 --- a/arch/blackfin/include/asm/sections.h +++ b/arch/blackfin/include/asm/sections.h @@ -4,4 +4,15 @@ /* nothing to see, move along */ #include +/* only used when MTD_UCLINUX */ +extern unsigned long memory_mtd_start, memory_mtd_end, mtd_size; + +extern unsigned long _ramstart, _ramend, _rambase; +extern unsigned long memory_start, memory_end, physical_mem_end; + +extern char _stext_l1[], _etext_l1[], _sdata_l1[], _edata_l1[], _sbss_l1[], + _ebss_l1[], _l1_lma_start[], _sdata_b_l1[], _sbss_b_l1[], _ebss_b_l1[], + _stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[], _sbss_l2[], + _ebss_l2[], _l2_lma_start[]; + #endif -- cgit v1.2.3 From c7b412f41d9c95d084e049fe83248ebb41a2d8f5 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 8 Jun 2009 18:44:45 -0400 Subject: Blackfin: add preliminary support for STACKTRACE Signed-off-by: Mike Frysinger --- arch/blackfin/Kconfig | 3 +++ arch/blackfin/kernel/Makefile | 1 + arch/blackfin/kernel/stacktrace.c | 53 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 57 insertions(+) create mode 100644 arch/blackfin/kernel/stacktrace.c (limited to 'arch') diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index d68cb0dc583..77ec14fcc61 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -55,6 +55,9 @@ config FORCE_MAX_ZONEORDER config GENERIC_CALIBRATE_DELAY def_bool y +config STACKTRACE_SUPPORT + def_bool y + config TRACE_IRQFLAGS_SUPPORT def_bool y diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile index fd4d4328a0f..a66dda4f4b1 100644 --- a/arch/blackfin/kernel/Makefile +++ b/arch/blackfin/kernel/Makefile @@ -23,6 +23,7 @@ obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_KGDB_TESTS) += kgdb_test.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o +obj-$(CONFIG_STACKTRACE) += stacktrace.o # the kgdb test puts code into L2 and without linker # relaxation, we need to force long calls to/from it diff --git a/arch/blackfin/kernel/stacktrace.c b/arch/blackfin/kernel/stacktrace.c new file mode 100644 index 00000000000..30301e1eace --- /dev/null +++ b/arch/blackfin/kernel/stacktrace.c @@ -0,0 +1,53 @@ +/* + * Blackfin stacktrace code (mostly copied from avr32) + * + * Copyright 2009 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +#include +#include +#include +#include + +register unsigned long current_frame_pointer asm("FP"); + +struct stackframe { + unsigned long fp; + unsigned long rets; +}; + +/* + * Save stack-backtrace addresses into a stack_trace buffer. + */ +void save_stack_trace(struct stack_trace *trace) +{ + unsigned long low, high; + unsigned long fp; + struct stackframe *frame; + int skip = trace->skip; + + low = (unsigned long)task_stack_page(current); + high = low + THREAD_SIZE; + fp = current_frame_pointer; + + while (fp >= low && fp <= (high - sizeof(*frame))) { + frame = (struct stackframe *)fp; + + if (skip) { + skip--; + } else { + trace->entries[trace->nr_entries++] = frame->rets; + if (trace->nr_entries >= trace->max_entries) + break; + } + + /* + * The next frame must be at a higher address than the + * current frame. + */ + low = fp + sizeof(*frame); + fp = frame->fp; + } +} +EXPORT_SYMBOL_GPL(save_stack_trace); -- cgit v1.2.3 From 6fa68e7a7f0641e8b7f263141d600877cdc2b5f2 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 8 Jun 2009 18:45:01 -0400 Subject: Blackfin: enable support for LOCKDEP Signed-off-by: Mike Frysinger --- arch/blackfin/Kconfig | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 77ec14fcc61..d03fd638e9a 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -55,6 +55,9 @@ config FORCE_MAX_ZONEORDER config GENERIC_CALIBRATE_DELAY def_bool y +config LOCKDEP_SUPPORT + def_bool y + config STACKTRACE_SUPPORT def_bool y -- cgit v1.2.3 From 1c873be744410e26fb91ee9228c90adff6eabe15 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 9 Jun 2009 07:25:09 -0400 Subject: Blackfin: initial support for ftrace Just the basic ftrace support here -- mcount and the ftrace stub. Signed-off-by: Mike Frysinger --- arch/blackfin/Kconfig | 1 + arch/blackfin/include/asm/ftrace.h | 14 +++++++- arch/blackfin/kernel/Makefile | 1 + arch/blackfin/kernel/bfin_ksyms.c | 5 +++ arch/blackfin/kernel/ftrace-entry.S | 72 +++++++++++++++++++++++++++++++++++++ 5 files changed, 92 insertions(+), 1 deletion(-) create mode 100644 arch/blackfin/kernel/ftrace-entry.S (limited to 'arch') diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index d03fd638e9a..ea8d92c1d44 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -19,6 +19,7 @@ config RWSEM_XCHGADD_ALGORITHM config BLACKFIN def_bool y + select HAVE_FUNCTION_TRACER select HAVE_IDE select HAVE_KERNEL_GZIP select HAVE_KERNEL_BZIP2 diff --git a/arch/blackfin/include/asm/ftrace.h b/arch/blackfin/include/asm/ftrace.h index 40a8c178f10..8643680f0f7 100644 --- a/arch/blackfin/include/asm/ftrace.h +++ b/arch/blackfin/include/asm/ftrace.h @@ -1 +1,13 @@ -/* empty */ +/* + * Blackfin ftrace code + * + * Copyright 2009 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +#ifndef __ASM_BFIN_FTRACE_H__ +#define __ASM_BFIN_FTRACE_H__ + +#define MCOUNT_INSN_SIZE 8 /* sizeof mcount call: LINK + CALL */ + +#endif diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile index a66dda4f4b1..d2ae285e5b6 100644 --- a/arch/blackfin/kernel/Makefile +++ b/arch/blackfin/kernel/Makefile @@ -15,6 +15,7 @@ else obj-y += time.o endif +obj-$(CONFIG_FUNCTION_TRACER) += ftrace-entry.o obj-$(CONFIG_IPIPE) += ipipe.o obj-$(CONFIG_IPIPE_TRACE_MCOUNT) += mcount.o obj-$(CONFIG_BFIN_GPTIMERS) += gptimers.o diff --git a/arch/blackfin/kernel/bfin_ksyms.c b/arch/blackfin/kernel/bfin_ksyms.c index 53e893ff708..aa05e638fb7 100644 --- a/arch/blackfin/kernel/bfin_ksyms.c +++ b/arch/blackfin/kernel/bfin_ksyms.c @@ -103,3 +103,8 @@ EXPORT_SYMBOL(__raw_smp_mark_barrier_asm); EXPORT_SYMBOL(__raw_smp_check_barrier_asm); #endif #endif + +#ifdef CONFIG_FUNCTION_TRACER +extern void _mcount(void); +EXPORT_SYMBOL(_mcount); +#endif diff --git a/arch/blackfin/kernel/ftrace-entry.S b/arch/blackfin/kernel/ftrace-entry.S new file mode 100644 index 00000000000..ce71487b515 --- /dev/null +++ b/arch/blackfin/kernel/ftrace-entry.S @@ -0,0 +1,72 @@ +/* + * mcount and friends -- ftrace stuff + * + * Copyright (C) 2009 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +#include +#include + +.text + +/* GCC will have called us before setting up the function prologue, so we + * can clobber the normal scratch registers, but we need to make sure to + * save/restore the registers used for argument passing (R0-R2) in case + * the profiled function is using them. With data registers, R3 is the + * only one we can blow away. With pointer registers, we have P0-P2. + * + * Upon entry, the RETS will point to the top of the current profiled + * function. And since GCC setup the frame for us, the previous function + * will be waiting there. mmmm pie. + */ +ENTRY(__mcount) + /* save third function arg early so we can do testing below */ + [--sp] = r2; + + /* load the function pointer to the tracer */ + p0.l = _ftrace_trace_function; + p0.h = _ftrace_trace_function; + r3 = [p0]; + + /* optional micro optimization: don't call the stub tracer */ + r2.l = _ftrace_stub; + r2.h = _ftrace_stub; + cc = r2 == r3; + if ! cc jump .Ldo_trace; + + r2 = [sp++]; + rts; + +.Ldo_trace: + + /* save first/second function arg and the return register */ + [--sp] = r0; + [--sp] = r1; + [--sp] = rets; + + /* setup the tracer function */ + p0 = r3; + + /* tracer(ulong frompc, ulong selfpc): + * frompc: the pc that did the call to ... + * selfpc: ... this location + * the selfpc itself will need adjusting for the mcount call + */ + r1 = rets; + r0 = [fp + 4]; + r1 += -MCOUNT_INSN_SIZE; + + /* call the tracer */ + call (p0); + + /* restore state and get out of dodge */ + rets = [sp++]; + r1 = [sp++]; + r0 = [sp++]; + r2 = [sp++]; + +.globl _ftrace_stub +_ftrace_stub: + rts; +ENDPROC(__mcount) -- cgit v1.2.3 From 1ee76d7e169ff2b0ff1df4b40b9d5276eec9ffb4 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 10 Jun 2009 04:45:29 -0400 Subject: Blackfin: initial support for ftrace grapher Signed-off-by: Mike Frysinger --- arch/blackfin/Kconfig | 1 + arch/blackfin/kernel/Makefile | 3 ++ arch/blackfin/kernel/ftrace-entry.S | 68 +++++++++++++++++++++++++++++++++++++ arch/blackfin/kernel/ftrace.c | 42 +++++++++++++++++++++++ arch/blackfin/kernel/vmlinux.lds.S | 1 + 5 files changed, 115 insertions(+) create mode 100644 arch/blackfin/kernel/ftrace.c (limited to 'arch') diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index ea8d92c1d44..5bc1360de2e 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -19,6 +19,7 @@ config RWSEM_XCHGADD_ALGORITHM config BLACKFIN def_bool y + select HAVE_FUNCTION_GRAPH_TRACER select HAVE_FUNCTION_TRACER select HAVE_IDE select HAVE_KERNEL_GZIP diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile index d2ae285e5b6..3731088e181 100644 --- a/arch/blackfin/kernel/Makefile +++ b/arch/blackfin/kernel/Makefile @@ -16,6 +16,9 @@ else endif obj-$(CONFIG_FUNCTION_TRACER) += ftrace-entry.o +obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o +CFLAGS_REMOVE_ftrace.o = -pg + obj-$(CONFIG_IPIPE) += ipipe.o obj-$(CONFIG_IPIPE_TRACE_MCOUNT) += mcount.o obj-$(CONFIG_BFIN_GPTIMERS) += gptimers.o diff --git a/arch/blackfin/kernel/ftrace-entry.S b/arch/blackfin/kernel/ftrace-entry.S index ce71487b515..6980b7a0615 100644 --- a/arch/blackfin/kernel/ftrace-entry.S +++ b/arch/blackfin/kernel/ftrace-entry.S @@ -35,6 +35,28 @@ ENTRY(__mcount) cc = r2 == r3; if ! cc jump .Ldo_trace; +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + /* if the ftrace_graph_return function pointer is not set to + * the ftrace_stub entry, call prepare_ftrace_return(). + */ + p0.l = _ftrace_graph_return; + p0.h = _ftrace_graph_return; + r3 = [p0]; + cc = r2 == r3; + if ! cc jump _ftrace_graph_caller; + + /* similarly, if the ftrace_graph_entry function pointer is not + * set to the ftrace_graph_entry_stub entry, ... + */ + p0.l = _ftrace_graph_entry; + p0.h = _ftrace_graph_entry; + r2.l = _ftrace_graph_entry_stub; + r2.h = _ftrace_graph_entry_stub; + r3 = [p0]; + cc = r2 == r3; + if ! cc jump _ftrace_graph_caller; +#endif + r2 = [sp++]; rts; @@ -61,6 +83,7 @@ ENTRY(__mcount) call (p0); /* restore state and get out of dodge */ +.Lfinish_trace: rets = [sp++]; r1 = [sp++]; r0 = [sp++]; @@ -70,3 +93,48 @@ ENTRY(__mcount) _ftrace_stub: rts; ENDPROC(__mcount) + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +/* The prepare_ftrace_return() function is similar to the trace function + * except it takes a pointer to the location of the frompc. This is so + * the prepare_ftrace_return() can hijack it temporarily for probing + * purposes. + */ +ENTRY(_ftrace_graph_caller) + /* save first/second function arg and the return register */ + [--sp] = r0; + [--sp] = r1; + [--sp] = rets; + + r0 = fp; + r1 = rets; + r0 += 4; + r1 += -MCOUNT_INSN_SIZE; + call _prepare_ftrace_return; + + jump .Lfinish_trace; +ENDPROC(_ftrace_graph_caller) + +/* Undo the rewrite caused by ftrace_graph_caller(). The common function + * ftrace_return_to_handler() will return the original rets so we can + * restore it and be on our way. + */ +ENTRY(_return_to_handler) + /* make sure original return values are saved */ + [--sp] = p0; + [--sp] = r0; + [--sp] = r1; + + /* get original return address */ + call _ftrace_return_to_handler; + rets = r0; + + /* anomaly 05000371 - make sure we have at least three instructions + * between rets setting and the return + */ + r1 = [sp++]; + r0 = [sp++]; + p0 = [sp++]; + rts; +ENDPROC(_return_to_handler) +#endif diff --git a/arch/blackfin/kernel/ftrace.c b/arch/blackfin/kernel/ftrace.c new file mode 100644 index 00000000000..905bfc40a00 --- /dev/null +++ b/arch/blackfin/kernel/ftrace.c @@ -0,0 +1,42 @@ +/* + * ftrace graph code + * + * Copyright (C) 2009 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +#include +#include +#include +#include + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + +/* + * Hook the return address and push it in the stack of return addrs + * in current thread info. + */ +void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr) +{ + struct ftrace_graph_ent trace; + unsigned long return_hooker = (unsigned long)&return_to_handler; + + if (unlikely(atomic_read(¤t->tracing_graph_pause))) + return; + + if (ftrace_push_return_trace(*parent, self_addr, &trace.depth) == -EBUSY) + return; + + trace.func = self_addr; + + /* Only trace if the calling function expects to */ + if (!ftrace_graph_entry(&trace)) { + current->curr_ret_stack--; + return; + } + + /* all is well in the world ! hijack RETS ... */ + *parent = return_hooker; +} + +#endif diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S index 119fbdb4647..6ac307ca0d8 100644 --- a/arch/blackfin/kernel/vmlinux.lds.S +++ b/arch/blackfin/kernel/vmlinux.lds.S @@ -54,6 +54,7 @@ SECTIONS SCHED_TEXT #endif LOCK_TEXT + IRQENTRY_TEXT KPROBES_TEXT *(.text.*) *(.fixup) -- cgit v1.2.3 From d0cb9b4ef680c518087b019e29fe5c2eca9a0740 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 11 Jun 2009 21:52:35 +0000 Subject: Blackfin: improve CLKIN_HZ config default Most boards use 25000000 as the default HZ, so rather than add a whole bunch more boards, make it the default for everyone. This also fixes randconfig builds as there was no default before. Signed-off-by: Mike Frysinger --- arch/blackfin/Kconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 5bc1360de2e..26e48583729 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -414,12 +414,12 @@ comment "Clock/PLL Setup" config CLKIN_HZ int "Frequency of the crystal on the board in Hz" + default "10000000" if BFIN532_IP0X default "11059200" if BFIN533_STAMP + default "24576000" if PNAV10 + default "25000000" # most people use this default "27000000" if BFIN533_EZKIT - default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD || BFIN538_EZKIT || BFIN518F-EZBRD) default "30000000" if BFIN561_EZKIT - default "24576000" if PNAV10 - default "10000000" if BFIN532_IP0X help The frequency of CLKIN crystal oscillator on the board in Hz. Warning: This value should match the crystal on the board. Otherwise, -- cgit v1.2.3 From 61cdd7a28f8b515140cb5d8aea518678f0fae024 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 12 Jun 2009 07:30:55 -0400 Subject: Blackfin: hook up new rt_tgsigqueueinfo syscall Signed-off-by: Mike Frysinger --- arch/blackfin/include/asm/unistd.h | 3 ++- arch/blackfin/mach-common/entry.S | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/blackfin/include/asm/unistd.h b/arch/blackfin/include/asm/unistd.h index cf5066d3efd..da35133c171 100644 --- a/arch/blackfin/include/asm/unistd.h +++ b/arch/blackfin/include/asm/unistd.h @@ -380,8 +380,9 @@ #define __NR_inotify_init1 365 #define __NR_preadv 366 #define __NR_pwritev 367 +#define __NR_rt_tgsigqueueinfo 368 -#define __NR_syscall 368 +#define __NR_syscall 369 #define NR_syscalls __NR_syscall /* Old optional stuff no one actually uses */ diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index 25c6aa42d45..31fa313e81c 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -1608,6 +1608,7 @@ ENTRY(_sys_call_table) .long _sys_inotify_init1 /* 365 */ .long _sys_preadv .long _sys_pwritev + .long _sys_rt_tgsigqueueinfo .rept NR_syscalls-(.-_sys_call_table)/4 .long _sys_ni_syscall -- cgit v1.2.3