From ad80335a989ddace0969b180d4c417b56f26a254 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Fri, 1 Feb 2008 17:37:28 +1000 Subject: m68knommu: move ColdFire head.S to its own coldfire directory Move common ColdFire CPU head.S to common coldfire platform directory. Currently the common ColdFire CPU family code sits in the arch/m68knommu/platform/5307 directory. This is confusing, the files containing this common code are in no way specific to the 5307 ColdFire. Create an arch/m68knommu/platform/coldfire directory to contain this common code. Other m68knommu CPU varients do not need use this code though, so it doesn't make sense to move it to arch/m68knommu/kernel. Signed-off-by: Greg Ungerer Signed-off-by: Linus Torvalds --- arch/m68knommu/platform/5307/head.S | 222 -------------------------------- arch/m68knommu/platform/coldfire/head.S | 222 ++++++++++++++++++++++++++++++++ 2 files changed, 222 insertions(+), 222 deletions(-) delete mode 100644 arch/m68knommu/platform/5307/head.S create mode 100644 arch/m68knommu/platform/coldfire/head.S (limited to 'arch') diff --git a/arch/m68knommu/platform/5307/head.S b/arch/m68knommu/platform/5307/head.S deleted file mode 100644 index b9aa0ca29bf..00000000000 --- a/arch/m68knommu/platform/5307/head.S +++ /dev/null @@ -1,222 +0,0 @@ -/*****************************************************************************/ - -/* - * head.S -- common startup code for ColdFire CPUs. - * - * (C) Copyright 1999-2006, Greg Ungerer . - */ - -/*****************************************************************************/ - -#include -#include -#include -#include -#include -#include - -/*****************************************************************************/ - -/* - * If we don't have a fixed memory size, then lets build in code - * to auto detect the DRAM size. Obviously this is the prefered - * method, and should work for most boards. It won't work for those - * that do not have their RAM starting at address 0, and it only - * works on SDRAM (not boards fitted with SRAM). - */ -#if CONFIG_RAMSIZE != 0 -.macro GET_MEM_SIZE - movel #CONFIG_RAMSIZE,%d0 /* hard coded memory size */ -.endm - -#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \ - defined(CONFIG_M5249) || defined(CONFIG_M527x) || \ - defined(CONFIG_M528x) || defined(CONFIG_M5307) || \ - defined(CONFIG_M5407) -/* - * Not all these devices have exactly the same DRAM controller, - * but the DCMR register is virtually identical - give or take - * a couple of bits. The only exception is the 5272 devices, their - * DRAM controller is quite different. - */ -.macro GET_MEM_SIZE - movel MCF_MBAR+MCFSIM_DMR0,%d0 /* get mask for 1st bank */ - btst #0,%d0 /* check if region enabled */ - beq 1f - andl #0xfffc0000,%d0 - beq 1f - addl #0x00040000,%d0 /* convert mask to size */ -1: - movel MCF_MBAR+MCFSIM_DMR1,%d1 /* get mask for 2nd bank */ - btst #0,%d1 /* check if region enabled */ - beq 2f - andl #0xfffc0000, %d1 - beq 2f - addl #0x00040000,%d1 - addl %d1,%d0 /* total mem size in d0 */ -2: -.endm - -#elif defined(CONFIG_M5272) -.macro GET_MEM_SIZE - movel MCF_MBAR+MCFSIM_CSOR7,%d0 /* get SDRAM address mask */ - andil #0xfffff000,%d0 /* mask out chip select options */ - negl %d0 /* negate bits */ -.endm - -#elif defined(CONFIG_M520x) -.macro GET_MEM_SIZE - clrl %d0 - movel MCF_MBAR+MCFSIM_SDCS0, %d2 /* Get SDRAM chip select 0 config */ - andl #0x1f, %d2 /* Get only the chip select size */ - beq 3f /* Check if it is enabled */ - addql #1, %d2 /* Form exponent */ - moveql #1, %d0 - lsll %d2, %d0 /* 2 ^ exponent */ -3: - movel MCF_MBAR+MCFSIM_SDCS1, %d2 /* Get SDRAM chip select 1 config */ - andl #0x1f, %d2 /* Get only the chip select size */ - beq 4f /* Check if it is enabled */ - addql #1, %d2 /* Form exponent */ - moveql #1, %d1 - lsll %d2, %d1 /* 2 ^ exponent */ - addl %d1, %d0 /* Total size of SDRAM in d0 */ -4: -.endm - -#else -#error "ERROR: I don't know how to probe your boards memory size?" -#endif - -/*****************************************************************************/ - -/* - * Boards and platforms can do specific early hardware setup if - * they need to. Most don't need this, define away if not required. - */ -#ifndef PLATFORM_SETUP -#define PLATFORM_SETUP -#endif - -/*****************************************************************************/ - -.global _start -.global _rambase -.global _ramvec -.global _ramstart -.global _ramend - -/*****************************************************************************/ - -.data - -/* - * During startup we store away the RAM setup. These are not in the - * bss, since their values are determined and written before the bss - * has been cleared. - */ -_rambase: -.long 0 -_ramvec: -.long 0 -_ramstart: -.long 0 -_ramend: -.long 0 - -/*****************************************************************************/ - -.text - -/* - * This is the codes first entry point. This is where it all - * begins... - */ - -_start: - nop /* filler */ - movew #0x2700, %sr /* no interrupts */ - - /* - * Do any platform or board specific setup now. Most boards - * don't need anything. Those exceptions are define this in - * their board specific includes. - */ - PLATFORM_SETUP - - /* - * Create basic memory configuration. Set VBR accordingly, - * and size memory. - */ - movel #CONFIG_VECTORBASE,%a7 - movec %a7,%VBR /* set vectors addr */ - movel %a7,_ramvec - - movel #CONFIG_RAMBASE,%a7 /* mark the base of RAM */ - movel %a7,_rambase - - GET_MEM_SIZE /* macro code determines size */ - addl %a7,%d0 - movel %d0,_ramend /* set end ram addr */ - - /* - * Now that we know what the memory is, lets enable cache - * and get things moving. This is Coldfire CPU specific. - */ - CACHE_ENABLE /* enable CPU cache */ - - -#ifdef CONFIG_ROMFS_FS - /* - * Move ROM filesystem above bss :-) - */ - lea _sbss,%a0 /* get start of bss */ - lea _ebss,%a1 /* set up destination */ - movel %a0,%a2 /* copy of bss start */ - - movel 8(%a0),%d0 /* get size of ROMFS */ - addql #8,%d0 /* allow for rounding */ - andl #0xfffffffc, %d0 /* whole words */ - - addl %d0,%a0 /* copy from end */ - addl %d0,%a1 /* copy from end */ - movel %a1,_ramstart /* set start of ram */ - -_copy_romfs: - movel -(%a0),%d0 /* copy dword */ - movel %d0,-(%a1) - cmpl %a0,%a2 /* check if at end */ - bne _copy_romfs - -#else /* CONFIG_ROMFS_FS */ - lea _ebss,%a1 - movel %a1,_ramstart -#endif /* CONFIG_ROMFS_FS */ - - - /* - * Zero out the bss region. - */ - lea _sbss,%a0 /* get start of bss */ - lea _ebss,%a1 /* get end of bss */ - clrl %d0 /* set value */ -_clear_bss: - movel %d0,(%a0)+ /* clear each word */ - cmpl %a0,%a1 /* check if at end */ - bne _clear_bss - - /* - * Load the current task pointer and stack. - */ - lea init_thread_union,%a0 - lea THREAD_SIZE(%a0),%sp - - /* - * Assember start up done, start code proper. - */ - jsr start_kernel /* start Linux kernel */ - -_exit: - jmp _exit /* should never get here */ - -/*****************************************************************************/ diff --git a/arch/m68knommu/platform/coldfire/head.S b/arch/m68knommu/platform/coldfire/head.S new file mode 100644 index 00000000000..b9aa0ca29bf --- /dev/null +++ b/arch/m68knommu/platform/coldfire/head.S @@ -0,0 +1,222 @@ +/*****************************************************************************/ + +/* + * head.S -- common startup code for ColdFire CPUs. + * + * (C) Copyright 1999-2006, Greg Ungerer . + */ + +/*****************************************************************************/ + +#include +#include +#include +#include +#include +#include + +/*****************************************************************************/ + +/* + * If we don't have a fixed memory size, then lets build in code + * to auto detect the DRAM size. Obviously this is the prefered + * method, and should work for most boards. It won't work for those + * that do not have their RAM starting at address 0, and it only + * works on SDRAM (not boards fitted with SRAM). + */ +#if CONFIG_RAMSIZE != 0 +.macro GET_MEM_SIZE + movel #CONFIG_RAMSIZE,%d0 /* hard coded memory size */ +.endm + +#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \ + defined(CONFIG_M5249) || defined(CONFIG_M527x) || \ + defined(CONFIG_M528x) || defined(CONFIG_M5307) || \ + defined(CONFIG_M5407) +/* + * Not all these devices have exactly the same DRAM controller, + * but the DCMR register is virtually identical - give or take + * a couple of bits. The only exception is the 5272 devices, their + * DRAM controller is quite different. + */ +.macro GET_MEM_SIZE + movel MCF_MBAR+MCFSIM_DMR0,%d0 /* get mask for 1st bank */ + btst #0,%d0 /* check if region enabled */ + beq 1f + andl #0xfffc0000,%d0 + beq 1f + addl #0x00040000,%d0 /* convert mask to size */ +1: + movel MCF_MBAR+MCFSIM_DMR1,%d1 /* get mask for 2nd bank */ + btst #0,%d1 /* check if region enabled */ + beq 2f + andl #0xfffc0000, %d1 + beq 2f + addl #0x00040000,%d1 + addl %d1,%d0 /* total mem size in d0 */ +2: +.endm + +#elif defined(CONFIG_M5272) +.macro GET_MEM_SIZE + movel MCF_MBAR+MCFSIM_CSOR7,%d0 /* get SDRAM address mask */ + andil #0xfffff000,%d0 /* mask out chip select options */ + negl %d0 /* negate bits */ +.endm + +#elif defined(CONFIG_M520x) +.macro GET_MEM_SIZE + clrl %d0 + movel MCF_MBAR+MCFSIM_SDCS0, %d2 /* Get SDRAM chip select 0 config */ + andl #0x1f, %d2 /* Get only the chip select size */ + beq 3f /* Check if it is enabled */ + addql #1, %d2 /* Form exponent */ + moveql #1, %d0 + lsll %d2, %d0 /* 2 ^ exponent */ +3: + movel MCF_MBAR+MCFSIM_SDCS1, %d2 /* Get SDRAM chip select 1 config */ + andl #0x1f, %d2 /* Get only the chip select size */ + beq 4f /* Check if it is enabled */ + addql #1, %d2 /* Form exponent */ + moveql #1, %d1 + lsll %d2, %d1 /* 2 ^ exponent */ + addl %d1, %d0 /* Total size of SDRAM in d0 */ +4: +.endm + +#else +#error "ERROR: I don't know how to probe your boards memory size?" +#endif + +/*****************************************************************************/ + +/* + * Boards and platforms can do specific early hardware setup if + * they need to. Most don't need this, define away if not required. + */ +#ifndef PLATFORM_SETUP +#define PLATFORM_SETUP +#endif + +/*****************************************************************************/ + +.global _start +.global _rambase +.global _ramvec +.global _ramstart +.global _ramend + +/*****************************************************************************/ + +.data + +/* + * During startup we store away the RAM setup. These are not in the + * bss, since their values are determined and written before the bss + * has been cleared. + */ +_rambase: +.long 0 +_ramvec: +.long 0 +_ramstart: +.long 0 +_ramend: +.long 0 + +/*****************************************************************************/ + +.text + +/* + * This is the codes first entry point. This is where it all + * begins... + */ + +_start: + nop /* filler */ + movew #0x2700, %sr /* no interrupts */ + + /* + * Do any platform or board specific setup now. Most boards + * don't need anything. Those exceptions are define this in + * their board specific includes. + */ + PLATFORM_SETUP + + /* + * Create basic memory configuration. Set VBR accordingly, + * and size memory. + */ + movel #CONFIG_VECTORBASE,%a7 + movec %a7,%VBR /* set vectors addr */ + movel %a7,_ramvec + + movel #CONFIG_RAMBASE,%a7 /* mark the base of RAM */ + movel %a7,_rambase + + GET_MEM_SIZE /* macro code determines size */ + addl %a7,%d0 + movel %d0,_ramend /* set end ram addr */ + + /* + * Now that we know what the memory is, lets enable cache + * and get things moving. This is Coldfire CPU specific. + */ + CACHE_ENABLE /* enable CPU cache */ + + +#ifdef CONFIG_ROMFS_FS + /* + * Move ROM filesystem above bss :-) + */ + lea _sbss,%a0 /* get start of bss */ + lea _ebss,%a1 /* set up destination */ + movel %a0,%a2 /* copy of bss start */ + + movel 8(%a0),%d0 /* get size of ROMFS */ + addql #8,%d0 /* allow for rounding */ + andl #0xfffffffc, %d0 /* whole words */ + + addl %d0,%a0 /* copy from end */ + addl %d0,%a1 /* copy from end */ + movel %a1,_ramstart /* set start of ram */ + +_copy_romfs: + movel -(%a0),%d0 /* copy dword */ + movel %d0,-(%a1) + cmpl %a0,%a2 /* check if at end */ + bne _copy_romfs + +#else /* CONFIG_ROMFS_FS */ + lea _ebss,%a1 + movel %a1,_ramstart +#endif /* CONFIG_ROMFS_FS */ + + + /* + * Zero out the bss region. + */ + lea _sbss,%a0 /* get start of bss */ + lea _ebss,%a1 /* get end of bss */ + clrl %d0 /* set value */ +_clear_bss: + movel %d0,(%a0)+ /* clear each word */ + cmpl %a0,%a1 /* check if at end */ + bne _clear_bss + + /* + * Load the current task pointer and stack. + */ + lea init_thread_union,%a0 + lea THREAD_SIZE(%a0),%sp + + /* + * Assember start up done, start code proper. + */ + jsr start_kernel /* start Linux kernel */ + +_exit: + jmp _exit /* should never get here */ + +/*****************************************************************************/ -- cgit v1.2.3