From 9b6695a8adfe0916e81ddd810a5b9db3eb8b0e46 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 23 Feb 2006 12:23:27 +0000 Subject: [MIPS] SMP: Fix initialization order bug. A recent change requires cpu_possible_map to be initialized before smp_sched_init() but most MIPS platforms were initializing their processors in the prom_prepare_cpus callback of smp_prepare_cpus. The simple fix of calling prom_prepare_cpus from one of the earlier SMP initialization hooks doesn't work well either since IPIs may require init_IRQ() to have completed, so bit the bullet and split prom_prepare_cpus into two initialization functions, plat_smp_setup which is called early from setup_arch and plat_prepare_cpus called where prom_prepare_cpus used to be called. Signed-off-by: Ralf Baechle --- arch/mips/kernel/setup.c | 3 +++ arch/mips/kernel/smp.c | 2 +- arch/mips/kernel/smp_mt.c | 13 +++++++------ arch/mips/pmc-sierra/yosemite/smp.c | 24 ++++++------------------ arch/mips/sgi-ip27/ip27-smp.c | 7 ++++++- arch/mips/sibyte/cfe/smp.c | 10 +++++++--- 6 files changed, 30 insertions(+), 29 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index d86affa2127..d9293c558e4 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -540,6 +540,9 @@ void __init setup_arch(char **cmdline_p) sparse_init(); paging_init(); resource_init(); +#ifdef CONFIG_SMP + plat_smp_setup(); +#endif } int __init fpu_disable(char *s) diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index 5e189862e52..06ed9075242 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -236,7 +236,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus) init_new_context(current, &init_mm); current_thread_info()->cpu = 0; smp_tune_scheduling(); - prom_prepare_cpus(max_cpus); + plat_prepare_cpus(max_cpus); } /* preload SMP state for boot cpu */ diff --git a/arch/mips/kernel/smp_mt.c b/arch/mips/kernel/smp_mt.c index c930364830d..993b8bf56aa 100644 --- a/arch/mips/kernel/smp_mt.c +++ b/arch/mips/kernel/smp_mt.c @@ -143,7 +143,7 @@ static struct irqaction irq_call = { * Make sure all CPU's are in a sensible state before we boot any of the * secondarys */ -void prom_prepare_cpus(unsigned int max_cpus) +void plat_smp_setup(void) { unsigned long val; int i, num; @@ -179,11 +179,9 @@ void prom_prepare_cpus(unsigned int max_cpus) write_vpe_c0_vpeconf0(tmp); /* Record this as available CPU */ - if (i < max_cpus) { - cpu_set(i, phys_cpu_present_map); - __cpu_number_map[i] = ++num; - __cpu_logical_map[num] = i; - } + cpu_set(i, phys_cpu_present_map); + __cpu_number_map[i] = ++num; + __cpu_logical_map[num] = i; } /* disable multi-threading with TC's */ @@ -241,7 +239,10 @@ void prom_prepare_cpus(unsigned int max_cpus) set_vi_handler (MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch); set_vi_handler (MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch); } +} +void __init plat_prepare_cpus(unsigned int max_cpus) +{ cpu_ipi_resched_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_RESCHED_IRQ; cpu_ipi_call_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_CALL_IRQ; diff --git a/arch/mips/pmc-sierra/yosemite/smp.c b/arch/mips/pmc-sierra/yosemite/smp.c index 7f8fda96219..c197311e15d 100644 --- a/arch/mips/pmc-sierra/yosemite/smp.c +++ b/arch/mips/pmc-sierra/yosemite/smp.c @@ -50,37 +50,25 @@ void __init prom_grab_secondary(void) * We don't want to start the secondary CPU yet nor do we have a nice probing * feature in PMON so we just assume presence of the secondary core. */ -static char maxcpus_string[] __initdata = - KERN_WARNING "max_cpus set to 0; using 1 instead\n"; - -void __init prom_prepare_cpus(unsigned int max_cpus) +void __init plat_smp_setup(void) { - int enabled = 0, i; - - if (max_cpus == 0) { - printk(maxcpus_string); - max_cpus = 1; - } + int i; cpus_clear(phys_cpu_present_map); for (i = 0; i < 2; i++) { - if (i == max_cpus) - break; - - /* - * The boot CPU - */ cpu_set(i, phys_cpu_present_map); __cpu_number_map[i] = i; __cpu_logical_map[i] = i; - enabled++; } +} +void __init plat_prepare_cpus(unsigned int max_cpus) +{ /* * Be paranoid. Enable the IPI only if we're really about to go SMP. */ - if (enabled > 1) + if (cpus_weight(cpu_possible_map)) set_c0_status(STATUSF_IP5); } diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c index dbef3f6b565..09fa7f5216f 100644 --- a/arch/mips/sgi-ip27/ip27-smp.c +++ b/arch/mips/sgi-ip27/ip27-smp.c @@ -140,7 +140,7 @@ static __init void intr_clear_all(nasid_t nasid) REMOTE_HUB_CLR_INTR(nasid, i); } -void __init prom_prepare_cpus(unsigned int max_cpus) +void __init plat_smp_setup(void) { cnodeid_t cnode; @@ -161,6 +161,11 @@ void __init prom_prepare_cpus(unsigned int max_cpus) alloc_cpupda(0, 0); } +void __init plat_prepare_cpus(unsigned int max_cpus) +{ + /* We already did everything necessary earlier */ +} + /* * Launch a slave into smp_bootstrap(). It doesn't take an argument, and we * set sp to the kernel stack of the newly created idle process, gp to the proc diff --git a/arch/mips/sibyte/cfe/smp.c b/arch/mips/sibyte/cfe/smp.c index 4477af3d807..eab20e2db32 100644 --- a/arch/mips/sibyte/cfe/smp.c +++ b/arch/mips/sibyte/cfe/smp.c @@ -31,7 +31,7 @@ * * Common setup before any secondaries are started */ -void __init prom_prepare_cpus(unsigned int max_cpus) +void __init plat_smp_setup(void) { int i, num; @@ -40,14 +40,18 @@ void __init prom_prepare_cpus(unsigned int max_cpus) __cpu_number_map[0] = 0; __cpu_logical_map[0] = 0; - for (i=1, num=0; i Date: Tue, 21 Feb 2006 15:59:00 +0900 Subject: [MIPS] Use generic compat routines for readdir, getdents Not just cleanup but also fixes O32 readdir(2) emulation. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/kernel/linux32.c | 54 ------------------------------------------ arch/mips/kernel/scall64-n32.S | 2 +- arch/mips/kernel/scall64-o32.S | 4 ++-- 3 files changed, 3 insertions(+), 57 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index 5f68b220c26..e00e5f6e7fd 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -161,60 +161,6 @@ out: return error; } -struct dirent32 { - unsigned int d_ino; - unsigned int d_off; - unsigned short d_reclen; - char d_name[NAME_MAX + 1]; -}; - -static void -xlate_dirent(void *dirent64, void *dirent32, long n) -{ - long off; - struct dirent *dirp; - struct dirent32 *dirp32; - - off = 0; - while (off < n) { - dirp = (struct dirent *)(dirent64 + off); - dirp32 = (struct dirent32 *)(dirent32 + off); - off += dirp->d_reclen; - dirp32->d_ino = dirp->d_ino; - dirp32->d_off = (unsigned int)dirp->d_off; - dirp32->d_reclen = dirp->d_reclen; - strncpy(dirp32->d_name, dirp->d_name, dirp->d_reclen - ((3 * 4) + 2)); - } - return; -} - -asmlinkage long -sys32_getdents(unsigned int fd, void * dirent32, unsigned int count) -{ - long n; - void *dirent64; - - dirent64 = (void *)((unsigned long)(dirent32 + (sizeof(long) - 1)) & ~(sizeof(long) - 1)); - if ((n = sys_getdents(fd, dirent64, count - (dirent64 - dirent32))) < 0) - return(n); - xlate_dirent(dirent64, dirent32, n); - return(n); -} - -asmlinkage int old_readdir(unsigned int fd, void * dirent, unsigned int count); - -asmlinkage int -sys32_readdir(unsigned int fd, void * dirent32, unsigned int count) -{ - int n; - struct dirent dirent64; - - if ((n = old_readdir(fd, &dirent64, count)) < 0) - return(n); - xlate_dirent(&dirent64, dirent32, dirent64.d_reclen); - return(n); -} - asmlinkage int sys32_waitpid(compat_pid_t pid, unsigned int *stat_addr, int options) { diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index d87b5446fa1..02c8267e45e 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -195,7 +195,7 @@ EXPORT(sysn32_call_table) PTR sys_fdatasync PTR sys_truncate PTR sys_ftruncate /* 6075 */ - PTR sys32_getdents + PTR compat_sys_getdents PTR sys_getcwd PTR sys_chdir PTR sys_fchdir diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 5b0414018c9..797e0d87488 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -293,7 +293,7 @@ sys_call_table: PTR sys_uselib PTR sys_swapon PTR sys_reboot - PTR sys32_readdir + PTR compat_sys_old_readdir PTR old_mmap /* 4090 */ PTR sys_munmap PTR sys_truncate @@ -345,7 +345,7 @@ sys_call_table: PTR sys_setfsuid PTR sys_setfsgid PTR sys32_llseek /* 4140 */ - PTR sys32_getdents + PTR compat_sys_getdents PTR compat_sys_select PTR sys_flock PTR sys_msync -- cgit v1.2.3 From 5d1a88af826b03edaac4d2bd2f25af56a54f26e6 Mon Sep 17 00:00:00 2001 From: "Zhang, Yanmin" Date: Fri, 17 Feb 2006 12:23:09 +0800 Subject: [IA64] Delete a redundant instruction in unaligned_access unaligned_access does fetch cr.ipsr, then calls dispatch_unaligned_handler, but dispatch_unaligned_handler fetches cr.ipsr again, so delete the first one. Signed-off-by: Zhang Yanmin Signed-off-by: Tony Luck --- arch/ia64/kernel/ivt.S | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S index 301f2e9d262..9f80569a32b 100644 --- a/arch/ia64/kernel/ivt.S +++ b/arch/ia64/kernel/ivt.S @@ -1362,7 +1362,6 @@ END(debug_vector) // 0x5a00 Entry 30 (size 16 bundles) Unaligned Reference (57) ENTRY(unaligned_access) DBG_FAULT(30) - mov r16=cr.ipsr mov r31=pr // prepare to save predicates ;; br.sptk.many dispatch_unaligned_handler -- cgit v1.2.3 From ac311ac2b7caca000b1501fd24136bdca30e2a51 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 24 Feb 2006 12:46:23 -0700 Subject: [IA64] Fix pcibios_setup pcibios_setup() should return NULL if it handled a parameter. Since ia64 handles no parameters, it should return the string that was passed in, not NULL. This brings ia64 into line with all other architectures that handle no parameters. Signed-off-by: Matthew Wilcox Signed-off-by: Tony Luck --- arch/ia64/pci/pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index 0b30ca00628..9ba32b2d96d 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -579,7 +579,7 @@ pcibios_align_resource (void *data, struct resource *res, char * __init pcibios_setup (char *str) { - return NULL; + return str; } int -- cgit v1.2.3 From eb0911e27e8c6778d6c8ec95b7dd60c002d923c3 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 21 Feb 2006 10:48:41 +0000 Subject: [IA64-SGI] revert export sn_pcidev_info_get Christoph Hellwig pointed that there are no in-tree uses of this. So revert 9c65cb9be62ac4993a5b392304b82e4f04f010fd Signed-off-by: Tony Luck --- arch/ia64/sn/kernel/io_init.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c index 3edef0d32f8..dfb3f290237 100644 --- a/arch/ia64/sn/kernel/io_init.c +++ b/arch/ia64/sn/kernel/io_init.c @@ -716,4 +716,3 @@ EXPORT_SYMBOL(sn_pci_unfixup_slot); EXPORT_SYMBOL(sn_pci_controller_fixup); EXPORT_SYMBOL(sn_bus_store_sysdata); EXPORT_SYMBOL(sn_bus_free_sysdata); -EXPORT_SYMBOL(sn_pcidev_info_get); -- cgit v1.2.3 From e963701a761aede31c9c1bfc74cf8e0ec671f0f4 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Mon, 27 Feb 2006 16:18:58 -0800 Subject: [IA64] die_if_kernel() can return arch/ia64/kernel/unaligned.c erroneously marked die_if_kernel() with a "noreturn" attribute ... which is silly (it returns whenever the argument regs say that the fault happened in user mode, as one might expect given the "if_kernel" part of its name!). Thanks to Alan and Gareth for pointing this out. Signed-off-by: Tony Luck --- arch/ia64/kernel/unaligned.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/kernel/unaligned.c b/arch/ia64/kernel/unaligned.c index f9e0ae936d1..11291389684 100644 --- a/arch/ia64/kernel/unaligned.c +++ b/arch/ia64/kernel/unaligned.c @@ -24,7 +24,7 @@ #include #include -extern void die_if_kernel(char *str, struct pt_regs *regs, long err) __attribute__ ((noreturn)); +extern void die_if_kernel(char *str, struct pt_regs *regs, long err); #undef DEBUG_UNALIGNED_TRAP -- cgit v1.2.3 From 9fe26a74f1e355dd707f09f9e5e9f035bcc6bae2 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Mon, 27 Feb 2006 17:07:14 -0800 Subject: [IA64] refresh default config files Bring all ia64 config files up to date Signed-off-by: Tony Luck --- arch/ia64/configs/bigsur_defconfig | 161 ++++++++++----- arch/ia64/configs/gensparse_defconfig | 161 ++++++++++----- arch/ia64/configs/sim_defconfig | 371 +++++++++++++++++++++++++--------- arch/ia64/configs/sn2_defconfig | 58 ++++-- arch/ia64/configs/tiger_defconfig | 57 ++++-- arch/ia64/configs/zx1_defconfig | 192 +++++++++++------- arch/ia64/defconfig | 177 +++++++++++----- 7 files changed, 826 insertions(+), 351 deletions(-) (limited to 'arch') diff --git a/arch/ia64/configs/bigsur_defconfig b/arch/ia64/configs/bigsur_defconfig index b40672bb3ab..90e9c2e61bf 100644 --- a/arch/ia64/configs/bigsur_defconfig +++ b/arch/ia64/configs/bigsur_defconfig @@ -1,14 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc1 -# Wed Sep 14 15:18:49 2005 +# Linux kernel version: 2.6.16-rc5 +# Mon Feb 27 16:10:42 2006 # # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -23,17 +22,18 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set # CONFIG_CPUSETS is not set CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -42,8 +42,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -57,18 +59,37 @@ CONFIG_OBSOLETE_MODPARM=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Processor type and features # CONFIG_IA64=y CONFIG_64BIT=y CONFIG_MMU=y +CONFIG_SWIOTLB=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_TIME_INTERPOLATION=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_DMA_IS_DMA32=y # CONFIG_IA64_GENERIC is not set CONFIG_IA64_DIG=y # CONFIG_IA64_HP_ZX1 is not set @@ -81,18 +102,17 @@ CONFIG_ITANIUM=y # CONFIG_IA64_PAGE_SIZE_8KB is not set CONFIG_IA64_PAGE_SIZE_16KB=y # CONFIG_IA64_PAGE_SIZE_64KB is not set +CONFIG_PGTABLE_3=y +# CONFIG_PGTABLE_4 is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 CONFIG_IA64_BRL_EMU=y CONFIG_IA64_L1_CACHE_SHIFT=6 -# CONFIG_NUMA is not set -# CONFIG_VIRTUAL_MEM_MAP is not set # CONFIG_IA64_CYCLONE is not set CONFIG_IOSAPIC=y -# CONFIG_IA64_SGI_SN_XP is not set -CONFIG_FORCE_MAX_ZONEORDER=18 +CONFIG_FORCE_MAX_ZONEORDER=17 CONFIG_SMP=y CONFIG_NR_CPUS=2 # CONFIG_HOTPLUG_CPU is not set @@ -105,7 +125,12 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set -CONFIG_HAVE_DEC_LOCK=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +# CONFIG_VIRTUAL_MEM_MAP is not set CONFIG_IA32_SUPPORT=y CONFIG_COMPAT=y # CONFIG_IA64_MCA_RECOVERY is not set @@ -117,7 +142,6 @@ CONFIG_IA64_PALINFO=y # CONFIG_EFI_VARS=y CONFIG_EFI_PCDP=y -# CONFIG_DELL_RBU is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m @@ -125,6 +149,7 @@ CONFIG_BINFMT_MISC=m # Power management and ACPI # CONFIG_PM=y +CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set # @@ -137,6 +162,7 @@ CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_THERMAL=m CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set +CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_CONTAINER is not set @@ -173,6 +199,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -206,6 +233,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -218,14 +250,16 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set # # Network testing # # CONFIG_NET_PKTGEN is not set -# CONFIG_NETFILTER_NETLINK is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set @@ -286,20 +320,13 @@ CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=m +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=m # @@ -390,6 +417,7 @@ CONFIG_SCSI_SPI_ATTRS=m # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -399,6 +427,7 @@ CONFIG_SCSI_SPI_ATTRS=m # CONFIG_SCSI_AIC79XX is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -409,14 +438,7 @@ CONFIG_SCSI_SPI_ATTRS=m # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_FC is not set CONFIG_SCSI_QLOGIC_1280=y -# CONFIG_SCSI_QLOGIC_1280_1040 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -448,6 +470,7 @@ CONFIG_DM_ZERO=m # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -486,6 +509,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -524,6 +548,7 @@ CONFIG_EEPRO100=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set @@ -630,6 +655,7 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_ACPI=y CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set @@ -681,6 +707,7 @@ CONFIG_DRM_R128=m # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -731,11 +758,18 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -754,6 +788,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set @@ -775,6 +810,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set @@ -830,6 +866,8 @@ CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m # CONFIG_SND_SEQUENCER_OSS is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set @@ -837,17 +875,18 @@ CONFIG_SND_PCM_OSS=m # Generic devices # CONFIG_SND_OPL3_LIB=m +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_AC97_BUS=m # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set -CONFIG_SND_AC97_CODEC=m -CONFIG_SND_AC97_BUS=m # # PCI devices # +# CONFIG_SND_AD1889 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set @@ -856,38 +895,38 @@ CONFIG_SND_AC97_BUS=m # CONFIG_SND_AU8830 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set -# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set CONFIG_SND_CS4281=m +# CONFIG_SND_CS46XX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set -# CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_FM801 is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set -# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_YMFPCI is not set # # USB devices @@ -929,12 +968,15 @@ CONFIG_USB_UHCI_HCD=m # USB Device Class drivers # # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set -CONFIG_USB_BLUETOOTH_TTY=m CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -946,13 +988,15 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=m CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set CONFIG_USB_HIDDEV=y @@ -972,6 +1016,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -1046,7 +1091,7 @@ CONFIG_USB_MON=y # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) # # @@ -1071,6 +1116,7 @@ CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -1111,6 +1157,7 @@ CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1153,6 +1200,7 @@ CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_SMB_FS is not set CONFIG_CIFS=m CONFIG_CIFS_STATS=y +# CONFIG_CIFS_STATS2 is not set CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y # CONFIG_CIFS_EXPERIMENTAL is not set @@ -1179,6 +1227,7 @@ CONFIG_MSDOS_PARTITION=y CONFIG_SGI_PARTITION=y # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # @@ -1237,28 +1286,32 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y # -# Profiling support +# Instrumentation Support # CONFIG_PROFILING=y CONFIG_OPROFILE=y +# CONFIG_KPROBES is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=16 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set CONFIG_DEBUG_PREEMPT=y +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set -# CONFIG_KPROBES is not set +# CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_IA64_GRANULE_16MB is not set CONFIG_IA64_GRANULE_64MB=y # CONFIG_IA64_PRINT_HAZARDS is not set diff --git a/arch/ia64/configs/gensparse_defconfig b/arch/ia64/configs/gensparse_defconfig index 991c07b57c2..184678fe783 100644 --- a/arch/ia64/configs/gensparse_defconfig +++ b/arch/ia64/configs/gensparse_defconfig @@ -1,14 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Wed Sep 28 08:27:29 2005 +# Linux kernel version: 2.6.16-rc5 +# Mon Feb 27 16:15:43 2006 # # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -23,18 +22,19 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -43,8 +43,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -58,18 +60,37 @@ CONFIG_MODVERSIONS=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Processor type and features # CONFIG_IA64=y CONFIG_64BIT=y CONFIG_MMU=y +CONFIG_SWIOTLB=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_TIME_INTERPOLATION=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_DMA_IS_DMA32=y CONFIG_IA64_GENERIC=y # CONFIG_IA64_DIG is not set # CONFIG_IA64_HP_ZX1 is not set @@ -82,6 +103,8 @@ CONFIG_MCKINLEY=y # CONFIG_IA64_PAGE_SIZE_8KB is not set CONFIG_IA64_PAGE_SIZE_16KB=y # CONFIG_IA64_PAGE_SIZE_64KB is not set +CONFIG_PGTABLE_3=y +# CONFIG_PGTABLE_4 is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set @@ -105,6 +128,9 @@ CONFIG_NEED_MULTIPLE_NODES=y CONFIG_HAVE_MEMORY_PRESENT=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_EXTREME=y +# CONFIG_MEMORY_HOTPLUG is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_DISCONTIGMEM_ENABLE=y CONFIG_ARCH_FLATMEM_ENABLE=y @@ -117,13 +143,13 @@ CONFIG_COMPAT=y CONFIG_IA64_MCA_RECOVERY=y CONFIG_PERFMON=y CONFIG_IA64_PALINFO=y +CONFIG_SGI_SN=y # # Firmware Drivers # CONFIG_EFI_VARS=y CONFIG_EFI_PCDP=y -# CONFIG_DELL_RBU is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m @@ -131,6 +157,7 @@ CONFIG_BINFMT_MISC=m # Power management and ACPI # CONFIG_PM=y +CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set # @@ -145,6 +172,7 @@ CONFIG_ACPI_THERMAL=m CONFIG_ACPI_NUMA=y CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set +CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_ACPI_CONTAINER=m @@ -187,6 +215,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -221,6 +250,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -233,8 +267,11 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set # # Network testing @@ -295,20 +332,13 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -400,6 +430,7 @@ CONFIG_SCSI_FC_ATTRS=y # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -409,16 +440,19 @@ CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_AIC79XX is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set CONFIG_SCSI_SATA=y # CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_MV is not set # CONFIG_SCSI_SATA_NV is not set -# CONFIG_SCSI_SATA_PROMISE is not set +# CONFIG_SCSI_PDC_ADMA is not set # CONFIG_SCSI_SATA_QSTOR is not set +# CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set +# CONFIG_SCSI_SATA_SIL24 is not set # CONFIG_SCSI_SATA_SIS is not set # CONFIG_SCSI_SATA_ULI is not set # CONFIG_SCSI_SATA_VIA is not set @@ -436,14 +470,7 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_FC is not set CONFIG_SCSI_QLOGIC_1280=y -# CONFIG_SCSI_QLOGIC_1280_1040 is not set -CONFIG_SCSI_QLA2XXX=y -CONFIG_SCSI_QLA21XX=m -CONFIG_SCSI_QLA22XX=m -CONFIG_SCSI_QLA2300=m -CONFIG_SCSI_QLA2322=m -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -476,6 +503,7 @@ CONFIG_DM_MULTIPATH=m CONFIG_FUSION=y CONFIG_FUSION_SPI=y CONFIG_FUSION_FC=m +# CONFIG_FUSION_SAS is not set CONFIG_FUSION_MAX_SGE=128 # CONFIG_FUSION_CTL is not set @@ -515,6 +543,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -564,6 +593,7 @@ CONFIG_E1000=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y @@ -668,12 +698,15 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set # CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set # CONFIG_N_HDLC is not set # CONFIG_SPECIALIX is not set # CONFIG_SX is not set @@ -689,6 +722,7 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_ACPI=y CONFIG_SERIAL_8250_NR_UARTS=6 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set @@ -738,10 +772,10 @@ CONFIG_DRM_SIS=m # CONFIG_DRM_VIA is not set # CONFIG_DRM_SAVAGE is not set CONFIG_RAW_DRIVER=m +CONFIG_MAX_RAW_DEVS=256 CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set CONFIG_HPET_MMAP=y -CONFIG_MAX_RAW_DEVS=256 # CONFIG_HANGCHECK_TIMER is not set CONFIG_MMTIMER=y @@ -749,12 +783,19 @@ CONFIG_MMTIMER=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -765,6 +806,7 @@ CONFIG_MMTIMER=y # CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_F71805F is not set # CONFIG_HWMON_DEBUG_CHIP is not set # @@ -815,26 +857,28 @@ CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PRINTK=y # CONFIG_SND_DEBUG is not set -CONFIG_SND_GENERIC_DRIVER=y # # Generic devices # CONFIG_SND_MPU401_UART=m CONFIG_SND_OPL3_LIB=m +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_AC97_BUS=m CONFIG_SND_DUMMY=m CONFIG_SND_VIRMIDI=m CONFIG_SND_MTPAV=m CONFIG_SND_SERIAL_U16550=m CONFIG_SND_MPU401=m -CONFIG_SND_AC97_CODEC=m -CONFIG_SND_AC97_BUS=m # # PCI devices # +# CONFIG_SND_AD1889 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set @@ -843,40 +887,40 @@ CONFIG_SND_AC97_BUS=m # CONFIG_SND_AU8830 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +CONFIG_SND_CS4281=m CONFIG_SND_CS46XX=m CONFIG_SND_CS46XX_NEW_DSP=y -CONFIG_SND_CS4281=m CONFIG_SND_EMU10K1=m # CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set -# CONFIG_SND_MAESTRO3 is not set CONFIG_SND_FM801=m # CONFIG_SND_FM801_TEA575X is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set -# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_YMFPCI is not set # # USB devices @@ -922,12 +966,15 @@ CONFIG_USB_UHCI_HCD=m # USB Device Class drivers # # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -939,12 +986,15 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=m CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set @@ -964,6 +1014,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -1043,6 +1094,7 @@ CONFIG_INFINIBAND_MTHCA=m # CONFIG_INFINIBAND_MTHCA_DEBUG is not set CONFIG_INFINIBAND_IPOIB=m # CONFIG_INFINIBAND_IPOIB_DEBUG is not set +# CONFIG_INFINIBAND_SRP is not set # # SN Devices @@ -1050,6 +1102,10 @@ CONFIG_INFINIBAND_IPOIB=m CONFIG_SGI_IOC4=y CONFIG_SGI_IOC3=y +# +# EDAC - error detection and reporting (RAS) +# + # # File systems # @@ -1079,6 +1135,7 @@ CONFIG_XFS_EXPORT=y # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -1120,6 +1177,7 @@ CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1189,6 +1247,7 @@ CONFIG_MSDOS_PARTITION=y CONFIG_SGI_PARTITION=y # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # @@ -1254,26 +1313,30 @@ CONFIG_GENERIC_PENDING_IRQ=y # CONFIG_HP_SIMSCSI is not set # -# Profiling support +# Instrumentation Support # # CONFIG_PROFILING is not set +# CONFIG_KPROBES is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=20 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set -# CONFIG_KPROBES is not set +# CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_IA64_GRANULE_16MB=y # CONFIG_IA64_GRANULE_64MB is not set # CONFIG_IA64_PRINT_HAZARDS is not set diff --git a/arch/ia64/configs/sim_defconfig b/arch/ia64/configs/sim_defconfig index a26781cfe8b..d9146c31ea1 100644 --- a/arch/ia64/configs/sim_defconfig +++ b/arch/ia64/configs/sim_defconfig @@ -1,39 +1,52 @@ # # Automatically generated make config: don't edit +# Linux kernel version: 2.6.16-rc5 +# Mon Feb 27 16:13:41 2006 # # # Code maturity level options # CONFIG_EXPERIMENTAL=y -# CONFIG_CLEAN_COMPILE is not set -# CONFIG_STANDALONE is not set -CONFIG_BROKEN=y -CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_HOTPLUG is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -43,21 +56,45 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Processor type and features # CONFIG_IA64=y CONFIG_64BIT=y CONFIG_MMU=y +CONFIG_SWIOTLB=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_TIME_INTERPOLATION=y CONFIG_EFI=y +CONFIG_GENERIC_IOMAP=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_DMA_IS_DMA32=y # CONFIG_IA64_GENERIC is not set # CONFIG_IA64_DIG is not set # CONFIG_IA64_HP_ZX1 is not set +# CONFIG_IA64_HP_ZX1_SWIOTLB is not set # CONFIG_IA64_SGI_SN2 is not set CONFIG_IA64_HP_SIM=y # CONFIG_ITANIUM is not set @@ -66,17 +103,36 @@ CONFIG_MCKINLEY=y # CONFIG_IA64_PAGE_SIZE_8KB is not set # CONFIG_IA64_PAGE_SIZE_16KB is not set CONFIG_IA64_PAGE_SIZE_64KB=y +CONFIG_PGTABLE_3=y +# CONFIG_PGTABLE_4 is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 CONFIG_IA64_L1_CACHE_SHIFT=7 -# CONFIG_MCKINLEY_ASTEP_SPECIFIC is not set -# CONFIG_VIRTUAL_MEM_MAP is not set # CONFIG_IA64_CYCLONE is not set -CONFIG_FORCE_MAX_ZONEORDER=18 +CONFIG_FORCE_MAX_ZONEORDER=17 CONFIG_SMP=y CONFIG_NR_CPUS=64 +# CONFIG_HOTPLUG_CPU is not set +# CONFIG_SCHED_SMT is not set CONFIG_PREEMPT=y -CONFIG_HAVE_DEC_LOCK=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +# CONFIG_VIRTUAL_MEM_MAP is not set CONFIG_IA32_SUPPORT=y CONFIG_COMPAT=y +# CONFIG_IA64_MCA_RECOVERY is not set # CONFIG_PERFMON is not set CONFIG_IA64_PALINFO=m @@ -84,7 +140,6 @@ CONFIG_IA64_PALINFO=m # Firmware Drivers # CONFIG_EFI_VARS=y -# CONFIG_SMBIOS is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y @@ -92,6 +147,81 @@ CONFIG_BINFMT_MISC=y # Power management and ACPI # +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +# CONFIG_UNIX is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + # # Device Drivers # @@ -99,8 +229,16 @@ CONFIG_BINFMT_MISC=y # # Generic Driver Options # +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + # # Memory Technology Devices (MTD) # @@ -118,12 +256,16 @@ CONFIG_BINFMT_MISC=y # # Block devices # +# CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support @@ -133,6 +275,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -144,6 +287,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -157,13 +301,14 @@ CONFIG_SCSI_LOGGING=y # CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers # -# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_DEBUG is not set # @@ -174,77 +319,47 @@ CONFIG_SCSI_SPI_ATTRS=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # -# CONFIG_IEEE1394 is not set # # I2O device support # # -# Networking support +# Network device support # -CONFIG_NET=y +# CONFIG_NETDEVICES is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set # -# Networking options +# PHY device support # -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -# CONFIG_UNIX is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set # -# SCTP Configuration (EXPERIMENTAL) +# Ethernet (10 or 100Mbit) # -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_HW_FLOWCONTROL is not set +# CONFIG_NET_ETHERNET is not set # -# QoS and/or fair queueing +# Ethernet (1000 Mbit) # -# CONFIG_NET_SCHED is not set # -# Network testing +# Ethernet (10000 Mbit) # -# CONFIG_NET_PKTGEN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_NETDEVICES is not set # # ISDN subsystem @@ -273,16 +388,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set - # # Input Device Drivers # @@ -292,6 +397,15 @@ CONFIG_SERIO_SERPORT=y # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + # # Character devices # @@ -310,7 +424,6 @@ CONFIG_HW_CONSOLE=y # CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set -# CONFIG_QIC02_TAPE is not set # # IPMI @@ -324,25 +437,52 @@ CONFIG_UNIX98_PTYS=y CONFIG_EFI_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set # # Ftape, the floppy tape device driver # -# CONFIG_FTAPE is not set # CONFIG_AGP is not set -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + # # Misc devices # +# +# Multimedia Capabilities Port drivers +# + # # Multimedia devices # @@ -362,7 +502,6 @@ CONFIG_EFI_RTC=y # Console display driver support # # CONFIG_VGA_CONSOLE is not set -# CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y # @@ -373,29 +512,54 @@ CONFIG_DUMMY_CONSOLE=y # # USB support # +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# # # USB Gadget Support # # CONFIG_USB_GADGET is not set +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) +# + # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -406,7 +570,8 @@ CONFIG_JBD=y # # DOS/FAT/NT Filesystems # -# CONFIG_FAT_FS is not set +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set # CONFIG_NTFS_FS is not set # @@ -415,12 +580,12 @@ CONFIG_JBD=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set # CONFIG_TMPFS is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -448,18 +613,22 @@ CONFIG_NFS_FS=y CONFIG_NFS_DIRECTIO=y CONFIG_NFSD=y CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set # CONFIG_NFSD_TCP is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -476,10 +645,10 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set # CONFIG_LDM_PARTITION is not set -# CONFIG_NEC98_PARTITION is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # @@ -490,8 +659,13 @@ CONFIG_EFI_PARTITION=y # # Library routines # +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_PENDING_IRQ=y # # HP Simulator drivers @@ -502,33 +676,50 @@ CONFIG_HP_SIMSERIAL_CONSOLE=y CONFIG_HP_SIMSCSI=y # -# Profiling support +# Instrumentation Support # # CONFIG_PROFILING is not set +# CONFIG_KPROBES is not set # # Kernel hacking # -# CONFIG_IA64_GRANULE_16MB is not set -CONFIG_IA64_GRANULE_64MB=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_IA64_PRINT_HAZARDS is not set -# CONFIG_DISABLE_VHPT is not set +# CONFIG_PRINTK_TIME is not set # CONFIG_MAGIC_SYSRQ is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_IA64_GRANULE_16MB is not set +CONFIG_IA64_GRANULE_64MB=y +# CONFIG_IA64_PRINT_HAZARDS is not set +# CONFIG_DISABLE_VHPT is not set # CONFIG_IA64_DEBUG_CMPXCHG is not set # CONFIG_IA64_DEBUG_IRQ is not set -CONFIG_DEBUG_INFO=y CONFIG_SYSVIPC_COMPAT=y # # Security options # +# CONFIG_KEYS is not set # CONFIG_SECURITY is not set # # Cryptographic options # # CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig index 3cb503b659e..8206752161b 100644 --- a/arch/ia64/configs/sn2_defconfig +++ b/arch/ia64/configs/sn2_defconfig @@ -1,14 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc4 -# Fri Dec 2 10:33:48 2005 +# Linux kernel version: 2.6.16-rc5 +# Mon Feb 27 16:06:38 2006 # # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -23,17 +22,18 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_CPUSETS=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -42,8 +42,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -88,7 +90,7 @@ CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_IA64_UNCACHED_ALLOCATOR=y -CONFIG_ZONE_DMA_IS_DMA32=y +CONFIG_DMA_IS_DMA32=y # CONFIG_IA64_GENERIC is not set # CONFIG_IA64_DIG is not set # CONFIG_IA64_HP_ZX1 is not set @@ -126,6 +128,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_DISCONTIGMEM_ENABLE=y CONFIG_ARCH_FLATMEM_ENABLE=y @@ -140,6 +143,7 @@ CONFIG_COMPAT=y CONFIG_IA64_MCA_RECOVERY=y CONFIG_PERFMON=y CONFIG_IA64_PALINFO=y +CONFIG_SGI_SN=y # # Firmware Drivers @@ -166,6 +170,7 @@ CONFIG_ACPI=y CONFIG_ACPI_NUMA=y CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set +CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_CONTAINER is not set @@ -207,6 +212,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -247,6 +253,11 @@ CONFIG_IPV6=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -330,6 +341,7 @@ CONFIG_ATA_OVER_ETH=m # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -457,13 +469,7 @@ CONFIG_SCSI_SATA_VITESSE=y # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_FC is not set CONFIG_SCSI_QLOGIC_1280=y -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -CONFIG_SCSI_QLA22XX=y -CONFIG_SCSI_QLA2300=y -CONFIG_SCSI_QLA2322=y -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -545,6 +551,7 @@ CONFIG_NETDEVICES=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set CONFIG_TIGON3=y # CONFIG_BNX2 is not set @@ -632,12 +639,15 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set # CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set # CONFIG_N_HDLC is not set # CONFIG_SPECIALIX is not set # CONFIG_SX is not set @@ -686,8 +696,8 @@ CONFIG_AGP=y CONFIG_AGP_SGI_TIOCA=y # CONFIG_DRM is not set CONFIG_RAW_DRIVER=m -# CONFIG_HPET is not set CONFIG_MAX_RAW_DEVS=256 +# CONFIG_HPET is not set # CONFIG_HANGCHECK_TIMER is not set CONFIG_MMTIMER=y @@ -702,6 +712,12 @@ CONFIG_MMTIMER=y # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -791,12 +807,14 @@ CONFIG_USB_UHCI_HCD=m # may also be needed; see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=m CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set @@ -816,6 +834,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -902,6 +921,10 @@ CONFIG_INFINIBAND_SRP=m CONFIG_SGI_IOC4=y CONFIG_SGI_IOC3=y +# +# EDAC - error detection and reporting (RAS) +# + # # File systems # @@ -931,6 +954,7 @@ CONFIG_XFS_QUOTA=y # CONFIG_XFS_SECURITY is not set CONFIG_XFS_POSIX_ACL=y CONFIG_XFS_RT=y +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -973,6 +997,7 @@ CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y CONFIG_RELAYFS_FS=m +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1041,6 +1066,7 @@ CONFIG_MSDOS_PARTITION=y CONFIG_SGI_PARTITION=y # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # @@ -1111,19 +1137,21 @@ CONFIG_GENERIC_PENDING_IRQ=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=20 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set CONFIG_DEBUG_PREEMPT=y +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_IA64_GRANULE_16MB=y # CONFIG_IA64_GRANULE_64MB is not set diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig index 6859119bc9d..125568118b8 100644 --- a/arch/ia64/configs/tiger_defconfig +++ b/arch/ia64/configs/tiger_defconfig @@ -1,14 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc4 -# Fri Dec 2 16:06:32 2005 +# Linux kernel version: 2.6.16-rc5 +# Mon Feb 27 15:49:18 2006 # # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -23,18 +22,19 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -43,8 +43,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -88,7 +90,7 @@ CONFIG_TIME_INTERPOLATION=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ZONE_DMA_IS_DMA32=y +CONFIG_DMA_IS_DMA32=y # CONFIG_IA64_GENERIC is not set CONFIG_IA64_DIG=y # CONFIG_IA64_HP_ZX1 is not set @@ -162,6 +164,7 @@ CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=m CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set +CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_ACPI_CONTAINER=m @@ -203,6 +206,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -237,6 +241,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -326,6 +335,7 @@ CONFIG_BLK_DEV_INITRD=y # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -443,13 +453,7 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 CONFIG_SCSI_QLOGIC_FC=y # CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set CONFIG_SCSI_QLOGIC_1280=y -CONFIG_SCSI_QLA2XXX=y -CONFIG_SCSI_QLA21XX=m -CONFIG_SCSI_QLA22XX=m -CONFIG_SCSI_QLA2300=m -CONFIG_SCSI_QLA2322=m -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -572,6 +576,7 @@ CONFIG_E1000=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y @@ -676,12 +681,15 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set # CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set # CONFIG_N_HDLC is not set # CONFIG_SPECIALIX is not set # CONFIG_SX is not set @@ -694,6 +702,7 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_ACPI=y CONFIG_SERIAL_8250_NR_UARTS=6 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set @@ -738,10 +747,10 @@ CONFIG_DRM_SIS=m # CONFIG_DRM_VIA is not set # CONFIG_DRM_SAVAGE is not set CONFIG_RAW_DRIVER=m +CONFIG_MAX_RAW_DEVS=256 CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set CONFIG_HPET_MMAP=y -CONFIG_MAX_RAW_DEVS=256 # CONFIG_HANGCHECK_TIMER is not set # @@ -755,6 +764,12 @@ CONFIG_MAX_RAW_DEVS=256 # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -765,6 +780,7 @@ CONFIG_MAX_RAW_DEVS=256 # CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_F71805F is not set # CONFIG_HWMON_DEBUG_CHIP is not set # @@ -854,12 +870,15 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set # CONFIG_USB_AIPTEK is not set @@ -873,6 +892,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -948,7 +968,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) # # @@ -980,6 +1000,7 @@ CONFIG_XFS_EXPORT=y # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -1021,6 +1042,7 @@ CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1090,6 +1112,7 @@ CONFIG_MSDOS_PARTITION=y CONFIG_SGI_PARTITION=y # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # @@ -1157,18 +1180,20 @@ CONFIG_GENERIC_PENDING_IRQ=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=20 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_IA64_GRANULE_16MB=y # CONFIG_IA64_GRANULE_64MB is not set diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig index 53899dc8eb5..949dc4670a0 100644 --- a/arch/ia64/configs/zx1_defconfig +++ b/arch/ia64/configs/zx1_defconfig @@ -1,16 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc1 -# Wed Sep 14 15:15:01 2005 +# Linux kernel version: 2.6.16-rc5 +# Mon Feb 27 15:55:36 2006 # # # Code maturity level options # CONFIG_EXPERIMENTAL=y -# CONFIG_CLEAN_COMPILE is not set -CONFIG_BROKEN=y -CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -26,17 +23,18 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set # CONFIG_CPUSETS is not set CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -45,8 +43,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -58,18 +58,37 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_KMOD is not set +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Processor type and features # CONFIG_IA64=y CONFIG_64BIT=y CONFIG_MMU=y +CONFIG_SWIOTLB=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_TIME_INTERPOLATION=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_DMA_IS_DMA32=y # CONFIG_IA64_GENERIC is not set # CONFIG_IA64_DIG is not set CONFIG_IA64_HP_ZX1=y @@ -82,18 +101,16 @@ CONFIG_MCKINLEY=y # CONFIG_IA64_PAGE_SIZE_8KB is not set CONFIG_IA64_PAGE_SIZE_16KB=y # CONFIG_IA64_PAGE_SIZE_64KB is not set +CONFIG_PGTABLE_3=y +# CONFIG_PGTABLE_4 is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 CONFIG_IA64_L1_CACHE_SHIFT=7 -# CONFIG_NUMA is not set -CONFIG_VIRTUAL_MEM_MAP=y -CONFIG_HOLES_IN_ZONE=y # CONFIG_IA64_CYCLONE is not set CONFIG_IOSAPIC=y -# CONFIG_IA64_SGI_SN_XP is not set -CONFIG_FORCE_MAX_ZONEORDER=18 +CONFIG_FORCE_MAX_ZONEORDER=17 CONFIG_SMP=y CONFIG_NR_CPUS=16 # CONFIG_HOTPLUG_CPU is not set @@ -106,7 +123,14 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set -CONFIG_HAVE_DEC_LOCK=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y +CONFIG_VIRTUAL_MEM_MAP=y +CONFIG_HOLES_IN_ZONE=y CONFIG_IA32_SUPPORT=y CONFIG_COMPAT=y CONFIG_IA64_MCA_RECOVERY=y @@ -118,7 +142,6 @@ CONFIG_IA64_PALINFO=y # CONFIG_EFI_VARS=y CONFIG_EFI_PCDP=y -# CONFIG_DELL_RBU is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y @@ -126,6 +149,7 @@ CONFIG_BINFMT_MISC=y # Power management and ACPI # CONFIG_PM=y +CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set # @@ -138,6 +162,7 @@ CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set +CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_CONTAINER is not set @@ -179,6 +204,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -210,15 +236,18 @@ CONFIG_TCP_CONG_BIC=y CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_XTABLES is not set + # # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set # CONFIG_IP_NF_QUEUE is not set -# CONFIG_IP_NF_IPTABLES is not set -CONFIG_IP_NF_ARPTABLES=y -# CONFIG_IP_NF_ARPFILTER is not set -# CONFIG_IP_NF_ARP_MANGLE is not set # # DCCP Configuration (EXPERIMENTAL) @@ -229,6 +258,11 @@ CONFIG_IP_NF_ARPTABLES=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -241,14 +275,16 @@ CONFIG_IP_NF_ARPTABLES=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set # # Network testing # # CONFIG_NET_PKTGEN is not set -# CONFIG_NETFILTER_NETLINK is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set @@ -310,20 +346,13 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -407,13 +436,14 @@ CONFIG_SCSI_LOGGING=y # SCSI Transport Attributes # CONFIG_SCSI_SPI_ATTRS=y -# CONFIG_SCSI_FC_ATTRS is not set +CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -421,13 +451,11 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_ADVANSYS is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set @@ -438,17 +466,9 @@ CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set CONFIG_SCSI_QLOGIC_1280=y -# CONFIG_SCSI_QLOGIC_1280_1040 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -465,6 +485,7 @@ CONFIG_SCSI_QLA2XXX=y CONFIG_FUSION=y CONFIG_FUSION_SPI=y CONFIG_FUSION_FC=y +# CONFIG_FUSION_SAS is not set CONFIG_FUSION_MAX_SGE=128 CONFIG_FUSION_CTL=m @@ -505,6 +526,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -555,6 +577,7 @@ CONFIG_E1000=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y @@ -652,6 +675,7 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_ACPI=y CONFIG_SERIAL_8250_NR_UARTS=8 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set @@ -703,6 +727,7 @@ CONFIG_DRM_RADEON=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -753,11 +778,18 @@ CONFIG_I2C_ALGOPCF=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -789,6 +821,7 @@ CONFIG_VIDEO_DEV=y # # Video Adapters # +# CONFIG_VIDEO_ADV_DEBUG is not set # CONFIG_VIDEO_BT848 is not set # CONFIG_VIDEO_CPIA is not set # CONFIG_VIDEO_SAA5246A is not set @@ -796,14 +829,16 @@ CONFIG_VIDEO_DEV=y # CONFIG_TUNER_3036 is not set # CONFIG_VIDEO_STRADIS is not set # CONFIG_VIDEO_ZORAN is not set -# CONFIG_VIDEO_ZR36120 is not set # CONFIG_VIDEO_SAA7134 is not set # CONFIG_VIDEO_MXB is not set # CONFIG_VIDEO_DPC is not set # CONFIG_VIDEO_HEXIUM_ORION is not set # CONFIG_VIDEO_HEXIUM_GEMINI is not set # CONFIG_VIDEO_CX88 is not set +# CONFIG_VIDEO_EM28XX is not set # CONFIG_VIDEO_OVCAMCHIP is not set +# CONFIG_VIDEO_AUDIO_DECODER is not set +# CONFIG_VIDEO_DECODER is not set # # Radio Adapters @@ -824,7 +859,6 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y # CONFIG_FB_MACMODES is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set @@ -833,6 +867,7 @@ CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set @@ -848,10 +883,7 @@ CONFIG_FB_RADEON_DEBUG=y # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_PM3 is not set -# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -860,6 +892,7 @@ CONFIG_FB_RADEON_DEBUG=y CONFIG_VGA_CONSOLE=y CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -892,6 +925,8 @@ CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set @@ -900,17 +935,18 @@ CONFIG_SND_SEQUENCER_OSS=y # CONFIG_SND_MPU401_UART=y CONFIG_SND_OPL3_LIB=y +CONFIG_SND_AC97_CODEC=y +CONFIG_SND_AC97_BUS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set -CONFIG_SND_AC97_CODEC=y -CONFIG_SND_AC97_BUS=y # # PCI devices # +# CONFIG_SND_AD1889 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set @@ -919,39 +955,39 @@ CONFIG_SND_AC97_BUS=y # CONFIG_SND_AU8830 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set -# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set # CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set -# CONFIG_SND_MAESTRO3 is not set CONFIG_SND_FM801=y CONFIG_SND_FM801_TEA575X=y +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set -# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_YMFPCI is not set # # USB devices @@ -997,12 +1033,15 @@ CONFIG_USB_UHCI_HCD=y # USB Device Class drivers # # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1014,13 +1053,15 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set CONFIG_USB_HIDDEV=y # CONFIG_USB_AIPTEK is not set @@ -1034,6 +1075,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -1049,6 +1091,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_DABUSB is not set # CONFIG_USB_VICAM is not set # CONFIG_USB_DSBR is not set +# CONFIG_USB_ET61X251 is not set # CONFIG_USB_IBMCAM is not set # CONFIG_USB_KONICAWC is not set # CONFIG_USB_OV511 is not set @@ -1113,7 +1156,7 @@ CONFIG_USB_MON=y # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) # # @@ -1135,6 +1178,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_INOTIFY is not set @@ -1174,6 +1218,7 @@ CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1238,6 +1283,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # @@ -1296,26 +1342,30 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y # -# Profiling support +# Instrumentation Support # # CONFIG_PROFILING is not set +CONFIG_KPROBES=y # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=17 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set -CONFIG_KPROBES=y +# CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_IA64_GRANULE_16MB=y # CONFIG_IA64_GRANULE_64MB is not set CONFIG_IA64_PRINT_HAZARDS=y diff --git a/arch/ia64/defconfig b/arch/ia64/defconfig index dcbc78a4cfa..3e767288a74 100644 --- a/arch/ia64/defconfig +++ b/arch/ia64/defconfig @@ -1,14 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc1 -# Wed Sep 14 15:13:03 2005 +# Linux kernel version: 2.6.16-rc5 +# Mon Feb 27 16:02:28 2006 # # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -23,18 +22,19 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -43,8 +43,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -58,18 +60,37 @@ CONFIG_MODVERSIONS=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Processor type and features # CONFIG_IA64=y CONFIG_64BIT=y CONFIG_MMU=y +CONFIG_SWIOTLB=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_TIME_INTERPOLATION=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_DMA_IS_DMA32=y CONFIG_IA64_GENERIC=y # CONFIG_IA64_DIG is not set # CONFIG_IA64_HP_ZX1 is not set @@ -89,14 +110,10 @@ CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 CONFIG_IA64_L1_CACHE_SHIFT=7 -CONFIG_NUMA=y -CONFIG_VIRTUAL_MEM_MAP=y -CONFIG_HOLES_IN_ZONE=y -CONFIG_ARCH_DISCONTIGMEM_ENABLE=y CONFIG_IA64_CYCLONE=y CONFIG_IOSAPIC=y # CONFIG_IA64_SGI_SN_XP is not set -CONFIG_FORCE_MAX_ZONEORDER=18 +CONFIG_FORCE_MAX_ZONEORDER=17 CONFIG_SMP=y CONFIG_NR_CPUS=512 CONFIG_HOTPLUG_CPU=y @@ -110,19 +127,29 @@ CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y # CONFIG_SPARSEMEM_STATIC is not set -CONFIG_HAVE_DEC_LOCK=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y +CONFIG_NUMA=y +CONFIG_VIRTUAL_MEM_MAP=y +CONFIG_HOLES_IN_ZONE=y +CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y CONFIG_IA32_SUPPORT=y CONFIG_COMPAT=y CONFIG_IA64_MCA_RECOVERY=y CONFIG_PERFMON=y CONFIG_IA64_PALINFO=y +CONFIG_SGI_SN=y # # Firmware Drivers # CONFIG_EFI_VARS=y CONFIG_EFI_PCDP=y -# CONFIG_DELL_RBU is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m @@ -130,6 +157,7 @@ CONFIG_BINFMT_MISC=m # Power management and ACPI # CONFIG_PM=y +CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set # @@ -144,6 +172,7 @@ CONFIG_ACPI_THERMAL=m CONFIG_ACPI_NUMA=y CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set +CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_ACPI_CONTAINER=m @@ -186,6 +215,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -220,6 +250,11 @@ CONFIG_TCP_CONG_BIC=y # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -232,14 +267,16 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set # # Network testing # # CONFIG_NET_PKTGEN is not set -# CONFIG_NETFILTER_NETLINK is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set @@ -301,20 +338,13 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -407,6 +437,7 @@ CONFIG_SCSI_FC_ATTRS=y # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -416,16 +447,19 @@ CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_AIC79XX is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set CONFIG_SCSI_SATA=y # CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_MV is not set # CONFIG_SCSI_SATA_NV is not set -# CONFIG_SCSI_SATA_PROMISE is not set +# CONFIG_SCSI_PDC_ADMA is not set # CONFIG_SCSI_SATA_QSTOR is not set +# CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set +# CONFIG_SCSI_SATA_SIL24 is not set # CONFIG_SCSI_SATA_SIS is not set # CONFIG_SCSI_SATA_ULI is not set # CONFIG_SCSI_SATA_VIA is not set @@ -443,14 +477,7 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_FC is not set CONFIG_SCSI_QLOGIC_1280=y -# CONFIG_SCSI_QLOGIC_1280_1040 is not set -CONFIG_SCSI_QLA2XXX=y -CONFIG_SCSI_QLA21XX=m -CONFIG_SCSI_QLA22XX=m -CONFIG_SCSI_QLA2300=m -CONFIG_SCSI_QLA2322=m -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -483,6 +510,7 @@ CONFIG_DM_MULTIPATH=m CONFIG_FUSION=y CONFIG_FUSION_SPI=y CONFIG_FUSION_FC=m +# CONFIG_FUSION_SAS is not set CONFIG_FUSION_MAX_SGE=128 # CONFIG_FUSION_CTL is not set @@ -523,6 +551,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -572,6 +601,7 @@ CONFIG_E1000=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y @@ -676,12 +706,15 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set # CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set # CONFIG_N_HDLC is not set # CONFIG_SPECIALIX is not set # CONFIG_SX is not set @@ -697,6 +730,7 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_ACPI=y CONFIG_SERIAL_8250_NR_UARTS=6 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set @@ -710,6 +744,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_SGI_L1_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_SGI_IOC4=y +# CONFIG_SERIAL_SGI_IOC3 is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -745,10 +780,10 @@ CONFIG_DRM_SIS=m # CONFIG_DRM_VIA is not set # CONFIG_DRM_SAVAGE is not set CONFIG_RAW_DRIVER=m +CONFIG_MAX_RAW_DEVS=256 CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set CONFIG_HPET_MMAP=y -CONFIG_MAX_RAW_DEVS=256 # CONFIG_HANGCHECK_TIMER is not set CONFIG_MMTIMER=y @@ -756,12 +791,19 @@ CONFIG_MMTIMER=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support # # CONFIG_I2C is not set +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + # # Dallas's 1-wire bus # @@ -772,6 +814,7 @@ CONFIG_MMTIMER=y # CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_F71805F is not set # CONFIG_HWMON_DEBUG_CHIP is not set # @@ -822,26 +865,28 @@ CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PRINTK=y # CONFIG_SND_DEBUG is not set -CONFIG_SND_GENERIC_DRIVER=y # # Generic devices # CONFIG_SND_MPU401_UART=m CONFIG_SND_OPL3_LIB=m +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_AC97_BUS=m CONFIG_SND_DUMMY=m CONFIG_SND_VIRMIDI=m CONFIG_SND_MTPAV=m CONFIG_SND_SERIAL_U16550=m CONFIG_SND_MPU401=m -CONFIG_SND_AC97_CODEC=m -CONFIG_SND_AC97_BUS=m # # PCI devices # +# CONFIG_SND_AD1889 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set @@ -850,40 +895,40 @@ CONFIG_SND_AC97_BUS=m # CONFIG_SND_AU8830 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +CONFIG_SND_CS4281=m CONFIG_SND_CS46XX=m CONFIG_SND_CS46XX_NEW_DSP=y -CONFIG_SND_CS4281=m CONFIG_SND_EMU10K1=m # CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set -# CONFIG_SND_MAESTRO3 is not set CONFIG_SND_FM801=m # CONFIG_SND_FM801_TEA575X is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set -# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_YMFPCI is not set # # USB devices @@ -929,12 +974,15 @@ CONFIG_USB_UHCI_HCD=m # USB Device Class drivers # # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -946,12 +994,15 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=m CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set @@ -971,6 +1022,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -1050,11 +1102,17 @@ CONFIG_INFINIBAND_MTHCA=m # CONFIG_INFINIBAND_MTHCA_DEBUG is not set CONFIG_INFINIBAND_IPOIB=m # CONFIG_INFINIBAND_IPOIB_DEBUG is not set +# CONFIG_INFINIBAND_SRP is not set # # SN Devices # CONFIG_SGI_IOC4=y +CONFIG_SGI_IOC3=m + +# +# EDAC - error detection and reporting (RAS) +# # # File systems @@ -1085,6 +1143,7 @@ CONFIG_XFS_EXPORT=y # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -1126,6 +1185,7 @@ CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1195,6 +1255,7 @@ CONFIG_MSDOS_PARTITION=y CONFIG_SGI_PARTITION=y # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # @@ -1260,26 +1321,30 @@ CONFIG_GENERIC_PENDING_IRQ=y # CONFIG_HP_SIMSCSI is not set # -# Profiling support +# Instrumentation Support # # CONFIG_PROFILING is not set +# CONFIG_KPROBES is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=20 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set -# CONFIG_KPROBES is not set +# CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_IA64_GRANULE_16MB=y # CONFIG_IA64_GRANULE_64MB is not set # CONFIG_IA64_PRINT_HAZARDS is not set -- cgit v1.2.3 From 637029c6cb5efcbaa3d5831af4c1972bdd629779 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 27 Feb 2006 20:41:56 -0800 Subject: Revert "[PATCH] x86_64: Only do the clustered systems have unsynchronized TSC assumption on IBM systems" This reverts commit 13a229abc25640813f1480c0478dfc6bdbc1c19e. Quoth Andi: "After some consideration and feedback from various people it turns out this wasn't that good an idea. It has some problems and needs more work. Since it was only an optimization anyways it's best to just back it out again for now." Signed-off-by: Linus Torvalds --- arch/i386/kernel/acpi/boot.c | 3 +++ arch/x86_64/kernel/apic.c | 9 +-------- 2 files changed, 4 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c index 8309a7b2cd6..79577f0ace9 100644 --- a/arch/i386/kernel/acpi/boot.c +++ b/arch/i386/kernel/acpi/boot.c @@ -44,6 +44,9 @@ extern void __init clustered_apic_check(void); extern int gsi_irq_sharing(int gsi); #include +static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id) { return 0; } + + #else /* X86 */ #ifdef CONFIG_X86_LOCAL_APIC diff --git a/arch/x86_64/kernel/apic.c b/arch/x86_64/kernel/apic.c index d70605eda33..e5b14c57eaa 100644 --- a/arch/x86_64/kernel/apic.c +++ b/arch/x86_64/kernel/apic.c @@ -962,14 +962,12 @@ void smp_apic_timer_interrupt(struct pt_regs *regs) irq_exit(); } -int __initdata unsync_tsc_on_multicluster; - /* * oem_force_hpet_timer -- force HPET mode for some boxes. * * Thus far, the major user of this is IBM's Summit2 series: * - * Some clustered boxes may have unsynced TSC problems if they are + * Clustered boxes may have unsynced TSC problems if they are * multi-chassis. Use available data to take a good guess. * If in doubt, go HPET. */ @@ -979,11 +977,6 @@ __cpuinit int oem_force_hpet_timer(void) unsigned id; DECLARE_BITMAP(clustermap, NUM_APIC_CLUSTERS); - /* Only do this check on IBM machines - big Unisys systems - use multiple clusters too, but have synchronized TSC */ - if (!unsync_tsc_on_multicluster) - return 0; - bitmap_zero(clustermap, NUM_APIC_CLUSTERS); for (i = 0; i < NR_CPUS; i++) { -- cgit v1.2.3 From 827c1a6c1a5dcb2902fecfb648f9af6a532934eb Mon Sep 17 00:00:00 2001 From: John Rose Date: Fri, 24 Feb 2006 11:34:23 -0600 Subject: [PATCH] powerpc: fix dynamic PCI probe regression Some hotplug driver functions were migrated to the kernel for use by EEH in commit 2bf6a8fa21570f37fd1789610da30f70a05ac5e3. Previously, the PCI Hotplug module had been changed to use the new OFDT-based PCI probe when appropriate: 5fa80fcdca9d20d30c9ecec30d4dbff4ed93a5c6 When rpaphp_pci_config_slot() was moved from the rpaphp driver to the new kernel function pcibios_add_pci_devices(), the OFDT-based probe stuff was dropped. This patch restores it. Signed-off-by: John Rose Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/eeh.c | 14 ++++++++++++ arch/powerpc/platforms/pseries/pci_dlpar.c | 36 +++++++++++++++++------------- 2 files changed, 34 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 83578313ee7..2ab9dcdfb41 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -893,6 +893,20 @@ void eeh_add_device_tree_early(struct device_node *dn) } EXPORT_SYMBOL_GPL(eeh_add_device_tree_early); +void eeh_add_device_tree_late(struct pci_bus *bus) +{ + struct pci_dev *dev; + + list_for_each_entry(dev, &bus->devices, bus_list) { + eeh_add_device_late(dev); + if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) { + struct pci_bus *subbus = dev->subordinate; + if (subbus) + eeh_add_device_tree_late(subbus); + } + } +} + /** * eeh_add_device_late - perform EEH initialization for the indicated pci device * @dev: pci device for which to set up EEH diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c index bdaa8aabdaa..f3bad900bbc 100644 --- a/arch/powerpc/platforms/pseries/pci_dlpar.c +++ b/arch/powerpc/platforms/pseries/pci_dlpar.c @@ -106,6 +106,8 @@ pcibios_fixup_new_pci_devices(struct pci_bus *bus, int fix_bus) } } } + + eeh_add_device_tree_late(bus); } EXPORT_SYMBOL_GPL(pcibios_fixup_new_pci_devices); @@ -114,7 +116,6 @@ pcibios_pci_config_bridge(struct pci_dev *dev) { u8 sec_busno; struct pci_bus *child_bus; - struct pci_dev *child_dev; /* Get busno of downstream bus */ pci_read_config_byte(dev, PCI_SECONDARY_BUS, &sec_busno); @@ -129,10 +130,6 @@ pcibios_pci_config_bridge(struct pci_dev *dev) pci_scan_child_bus(child_bus); - list_for_each_entry(child_dev, &child_bus->devices, bus_list) { - eeh_add_device_late(child_dev); - } - /* Fixup new pci devices without touching bus struct */ pcibios_fixup_new_pci_devices(child_bus, 0); @@ -160,18 +157,25 @@ pcibios_add_pci_devices(struct pci_bus * bus) eeh_add_device_tree_early(dn); - /* pci_scan_slot should find all children */ - slotno = PCI_SLOT(PCI_DN(dn->child)->devfn); - num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0)); - if (num) { - pcibios_fixup_new_pci_devices(bus, 1); - pci_bus_add_devices(bus); - } + if (_machine == PLATFORM_PSERIES_LPAR) { + /* use ofdt-based probe */ + of_scan_bus(dn, bus); + if (!list_empty(&bus->devices)) { + pcibios_fixup_new_pci_devices(bus, 0); + pci_bus_add_devices(bus); + } + } else { + /* use legacy probe */ + slotno = PCI_SLOT(PCI_DN(dn->child)->devfn); + num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0)); + if (num) { + pcibios_fixup_new_pci_devices(bus, 1); + pci_bus_add_devices(bus); + } - list_for_each_entry(dev, &bus->devices, bus_list) { - eeh_add_device_late (dev); - if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) - pcibios_pci_config_bridge(dev); + list_for_each_entry(dev, &bus->devices, bus_list) + if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) + pcibios_pci_config_bridge(dev); } } EXPORT_SYMBOL_GPL(pcibios_add_pci_devices); -- cgit v1.2.3 From 634473db86502b6444c3cebd279a06e0b8737527 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sun, 26 Feb 2006 08:09:00 +1100 Subject: [PATCH] powerpc: vdso 64bits gettimeofday bug A bug in the assembly code of the vdso can cause gettimeofday() to hang or to return incorrect results. The wrong register was used to test for pending updates of the calibration variables and to create a dependency for subsequent loads. This fixes it. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/vdso64/gettimeofday.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/vdso64/gettimeofday.S b/arch/powerpc/kernel/vdso64/gettimeofday.S index ccaeda5136d..4ee871f1cad 100644 --- a/arch/powerpc/kernel/vdso64/gettimeofday.S +++ b/arch/powerpc/kernel/vdso64/gettimeofday.S @@ -225,9 +225,9 @@ V_FUNCTION_BEGIN(__do_get_xsec) .cfi_startproc /* check for update count & load values */ 1: ld r8,CFG_TB_UPDATE_COUNT(r3) - andi. r0,r4,1 /* pending update ? loop */ + andi. r0,r8,1 /* pending update ? loop */ bne- 1b - xor r0,r4,r4 /* create dependency */ + xor r0,r8,r8 /* create dependency */ add r3,r3,r0 /* Get TB & offset it */ -- cgit v1.2.3 From 273d2803817c9e050e8d6c3c271db7d61f2fb259 Mon Sep 17 00:00:00 2001 From: Olaf Hering Date: Mon, 27 Feb 2006 15:52:59 +0100 Subject: [PATCH] powerpc: fix NULL pointer in handle_eeh_events This patch fixes a crash in handle_eeh_events, but ethtool -t still doesnt work right. ... pepino:~ # cpu 0x3: Vector: 300 (Data Access) at [c00000005192bbe0] pc: c00000000004a380: .handle_eeh_events+0xe0/0x23c lr: c00000000004a374: .handle_eeh_events+0xd4/0x23c sp: c00000005192be60 msr: 9000000000009032 dar: 268 dsisr: 40000000 current = 0xc0000001fe7bf1a0 paca = 0xc00000000048b280 pid = 16322, comm = eehd enter ? for help [c00000005192bf00] c00000000004a808 .eeh_event_handler+0xcc/0x130 [c00000005192bf90] c000000000025e00 .kernel_thread+0x4c/0x68 ... (none):/# /usr/sbin/ethtool -i eth0 driver: e100 version: 3.5.10-k2-NAPI firmware-version: N/A bus-info: 0000:21:01.0 (none):/# /usr/sbin/ethtool -t eth0 Call Trace: [C00000000F8DEFF0] [C00000000000F270] .show_stack+0x74/0x1b4 (unreliable) [C00000000F8DF0A0] [C000000000049D04] .eeh_dn_check_failure+0x290/0x2d8 [C00000000F8DF150] [C000000000049E58] .eeh_check_failure+0x10c/0x138 [C00000000F8DF1E0] [C0000000002DFDB0] .e100_hw_reset+0x70/0xf4 [C00000000F8DF270] [C0000000002E1BBC] .e100_hw_init+0x2c/0x260 [C00000000F8DF310] [C0000000002E2464] .e100_loopback_test+0x8c/0x220 [C00000000F8DF3C0] [C0000000002E28DC] .e100_diag_test+0xdc/0x16c [C00000000F8DF490] [C000000000420BE0] .dev_ethtool+0xf24/0x14f8 [C00000000F8DF8F0] [C00000000041F4A8] .dev_ioctl+0x5cc/0x740 [C00000000F8DFA20] [C00000000040FEFC] .sock_ioctl+0x3d0/0x404 [C00000000F8DFAC0] [C0000000000D513C] .do_ioctl+0x68/0x108 [C00000000F8DFB50] [C0000000000D56B0] .vfs_ioctl+0x4d4/0x510 [C00000000F8DFC10] [C0000000000D5740] .sys_ioctl+0x54/0x94 [C00000000F8DFCC0] [C0000000000FB6EC] .ethtool_ioctl+0x11c/0x150 [C00000000F8DFD60] [C0000000000F7E40] .compat_sys_ioctl+0x338/0x3bc [C00000000F8DFE30] [C00000000000871C] syscall_exit+0x0/0x40 EEH: Detected PCI bus error on device 0000:21:01.0 EEH: This PCI device has failed 1 times since last reboot: - modprobe: FATAL: Could not load /lib/modules/2.6.16-rc4-git7/modules.dep: No such file or directory Cannot get strings: No such device (none):/# (none):/# EEH: Unable to configure device bridge (-3) for /pci@400000000110/pci@2,2 (none):/# Call Trace: [C00000000FA17940] [C00000000000F270] .show_stack+0x74/0x1b4 (unreliable) [C00000000FA179F0] [C000000000049D04] .eeh_dn_check_failure+0x290/0x2d8 [C00000000FA17AA0] [C00000000001E114] .rtas_read_config+0x120/0x154 [C00000000FA17B40] [C000000000049664] .early_enable_eeh+0x274/0x2bc [C00000000FA17C00] [C000000000049708] .eeh_add_device_early+0x5c/0x6c [C00000000FA17C90] [C000000000049748] .eeh_add_device_tree_early+0x30/0x5c [C00000000FA17D20] [C000000000046568] .pcibios_add_pci_devices+0x8c/0x1f8 [C00000000FA17DD0] [C00000000004A528] .eeh_reset_device+0xe0/0x110 [C00000000FA17E60] [C00000000004A698] .handle_eeh_events+0x140/0x250 [C00000000FA17F00] [C00000000004AC7C] .eeh_event_handler+0xe8/0x140 [C00000000FA17F90] [C000000000025784] .kernel_thread+0x4c/0x68 EEH: Detected PCI bus error on device EEH: This PCI device has failed 1 times since last reboot: - EEH: Unable to configure device bridge (-3) for /pci@400000000110/pci@2,2 Call Trace: [C00000000FA17940] [C00000000000F270] .show_stack+0x74/0x1b4 (unreliable) [C00000000FA179F0] [C000000000049D04] .eeh_dn_check_failure+0x290/0x2d8 [C00000000FA17AA0] [C00000000001E114] .rtas_read_config+0x120/0x154 [C00000000FA17B40] [C000000000049664] .early_enable_eeh+0x274/0x2bc [C00000000FA17C00] [C000000000049708] .eeh_add_device_early+0x5c/0x6c [C00000000FA17C90] [C000000000049748] .eeh_add_device_tree_early+0x30/0x5c [C00000000FA17D20] [C000000000046568] .pcibios_add_pci_devices+0x8c/0x1f8 [C00000000FA17DD0] [C00000000004A528] .eeh_reset_device+0xe0/0x110 [C00000000FA17E60] [C00000000004A698] .handle_eeh_events+0x140/0x250 [C00000000FA17F00] [C00000000004AC7C] .eeh_event_handler+0xe8/0x140 [C00000000FA17F90] [C000000000025784] .kernel_thread+0x4c/0x68 EEH: Detected PCI bus error on device EEH: This PCI device has failed 1 times since last reboot: - EEH: Unable to configure device bridge (-3) for /pci@400000000110/pci@2,2 Call Trace: [C00000000FA17940] [C00000000000F270] .show_stack+0x74/0x1b4 (unreliable) [C00000000FA179F0] [C000000000049D04] .eeh_dn_check_failure+0x290/0x2d8 [C00000000FA17AA0] [C00000000001E114] .rtas_read_config+0x120/0x154 [C00000000FA17B40] [C000000000049664] .early_enable_eeh+0x274/0x2bc [C00000000FA17C00] [C000000000049708] .eeh_add_device_early+0x5c/0x6c [C00000000FA17C90] [C000000000049748] .eeh_add_device_tree_early+0x30/0x5c [C00000000FA17D20] [C000000000046568] .pcibios_add_pci_devices+0x8c/0x1f8 [C00000000FA17DD0] [C00000000004A528] .eeh_reset_device+0xe0/0x110 [C00000000FA17E60] [C00000000004A698] .handle_eeh_events+0x140/0x250 [C00000000FA17F00] [C00000000004AC7C] .eeh_event_handler+0xe8/0x140 [C00000000FA17F90] [C000000000025784] .kernel_thread+0x4c/0x68 EEH: Detected PCI bus error on device and so on Signed-off-by: Olaf Hering Acked-by: Linas Vepstas Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/eeh_driver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c index e3cbba49fd6..b811d5ff92f 100644 --- a/arch/powerpc/platforms/pseries/eeh_driver.c +++ b/arch/powerpc/platforms/pseries/eeh_driver.c @@ -37,7 +37,7 @@ static inline const char * pcid_name (struct pci_dev *pdev) { - if (pdev->dev.driver) + if (pdev && pdev->dev.driver) return pdev->dev.driver->name; return ""; } -- cgit v1.2.3 From 56ec6462af9cba56a04439154e5768672d6f390f Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 28 Feb 2006 14:54:26 +1100 Subject: [PATCH] powerpc/iseries: Fix double phys_to_abs bug in htab_bolt_mapping Before the merge I updated create_pte_mapping() to work for iSeries, by calling iSeries_hpte_bolt_or_insert. (4c55130b2aa93370f1bf52d2304394e91cf8ee39) Later we changed iSeries_hpte_insert to cope with the bolting case, and called that instead from create_pte_mapping() (which was renamed to htab_bolt_mapping) (3c726f8dee6f55e96475574e9f645327e461884c). Unfortunately that change introduced a subtle bug, where we pass an absolute address to iSeries_hpte_insert() where it expects a physical address. This leads to us calling phys_to_abs() twice on the physical address, which is seriously bogus. This only causes a problem if the absolute address from the first translation can be looked up again in the chunk_map, which depends on the size and layout of memory. I've seen it fail on one box, but not others. The minimal fix is to pass the physical address to iSeries_hpte_insert(). For 2.6.17 we should make phys_to_abs() BUG if we try to double-translate an address. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/mm/hash_utils_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index b1f614c612d..e9d589eefc1 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -169,7 +169,7 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend, #ifdef CONFIG_PPC_ISERIES if (_machine == PLATFORM_ISERIES_LPAR) ret = iSeries_hpte_insert(hpteg, va, - virt_to_abs(paddr), + __pa(vaddr), tmp_mode, HPTE_V_BOLTED, psize); -- cgit v1.2.3 From c8c1635faa7c97329111ce32b927d37306521822 Mon Sep 17 00:00:00 2001 From: Ken Chen Date: Tue, 28 Feb 2006 08:53:32 -0800 Subject: [IA64] cleanup in fsys.S beautify coding style for zeroing end of fsyscall_table entries. Remove misleading __NR_syscall_last and add more comments. Drop (now unneeded) "guard against failure to increase NR_syscalls" Signed-off-by: Ken Chen Signed-off-by: Tony Luck --- arch/ia64/kernel/fsys.S | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/fsys.S b/arch/ia64/kernel/fsys.S index ac6055c8311..7a05b1cb2ad 100644 --- a/arch/ia64/kernel/fsys.S +++ b/arch/ia64/kernel/fsys.S @@ -878,8 +878,7 @@ fsyscall_table: data8 0 // timer_delete data8 0 // clock_settime data8 fsys_clock_gettime // clock_gettime - #define __NR_syscall_last 1255 - .space 8*(NR_syscalls + 1024 - __NR_syscall_last), 0 - - .org fsyscall_table + 8*NR_syscalls // guard against failures to increase NR_syscalls + // fill in zeros for the remaining entries + .zero: + .space fsyscall_table + 8*NR_syscalls - .zero, 0 -- cgit v1.2.3 From 4debe4f963f9135771a8c5bc66e84396201dcfd8 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 27 Feb 2006 19:05:55 +0000 Subject: [MIPS] Initialize S-cache function pointers even on S-cache-less CPUs. When a CPU has no scache, the scache flushing functions currently aren't getting initialized and the NULL pointer is eventually called as a function. Initialize the scache flushing functions as a noop when there's no scache. Initial patch by me and most of the debugging done by Martin Michlmayr. Signed-off-by: Martin Michlmayr Signed-off-by: Ralf Baechle --- arch/mips/mm/c-r4k.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 1b71d91e826..0668e9bfce4 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -235,7 +235,9 @@ static inline void r4k_blast_scache_page_setup(void) { unsigned long sc_lsize = cpu_scache_line_size(); - if (sc_lsize == 16) + if (scache_size == 0) + r4k_blast_scache_page = (void *)no_sc_noop; + else if (sc_lsize == 16) r4k_blast_scache_page = blast_scache16_page; else if (sc_lsize == 32) r4k_blast_scache_page = blast_scache32_page; @@ -251,7 +253,9 @@ static inline void r4k_blast_scache_page_indexed_setup(void) { unsigned long sc_lsize = cpu_scache_line_size(); - if (sc_lsize == 16) + if (scache_size == 0) + r4k_blast_scache_page_indexed = (void *)no_sc_noop; + else if (sc_lsize == 16) r4k_blast_scache_page_indexed = blast_scache16_page_indexed; else if (sc_lsize == 32) r4k_blast_scache_page_indexed = blast_scache32_page_indexed; @@ -267,7 +271,9 @@ static inline void r4k_blast_scache_setup(void) { unsigned long sc_lsize = cpu_scache_line_size(); - if (sc_lsize == 16) + if (scache_size == 0) + r4k_blast_scache = (void *)no_sc_noop; + else if (sc_lsize == 16) r4k_blast_scache = blast_scache16; else if (sc_lsize == 32) r4k_blast_scache = blast_scache32; @@ -482,7 +488,7 @@ static inline void local_r4k_flush_icache_range(void *args) protected_blast_dcache_range(start, end); } - if (!cpu_icache_snoops_remote_store) { + if (!cpu_icache_snoops_remote_store && scache_size) { if (end - start > scache_size) r4k_blast_scache(); else @@ -651,7 +657,7 @@ static void local_r4k_flush_cache_sigtramp(void * arg) R4600_HIT_CACHEOP_WAR_IMPL; protected_writeback_dcache_line(addr & ~(dc_lsize - 1)); - if (!cpu_icache_snoops_remote_store) + if (!cpu_icache_snoops_remote_store && scache_size) protected_writeback_scache_line(addr & ~(sc_lsize - 1)); protected_flush_icache_line(addr & ~(ic_lsize - 1)); if (MIPS4K_ICACHE_REFILL_WAR) { -- cgit v1.2.3 From 778e2ac5970e445f8c6b7d8aa597ac162afe270a Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 28 Feb 2006 17:04:20 +0000 Subject: [MIPS] Fix build error on processors that don's support copy-on-write. Signed-off-by: Ralf Baechle --- arch/mips/lib/iomap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/lib/iomap.c b/arch/mips/lib/iomap.c index 7e2ced715cf..f4ac5bbcd81 100644 --- a/arch/mips/lib/iomap.c +++ b/arch/mips/lib/iomap.c @@ -63,7 +63,7 @@ void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) return ioport_map(start, len); if (flags & IORESOURCE_MEM) { if (flags & IORESOURCE_CACHEABLE) - return ioremap_cacheable_cow(start, len); + return ioremap_cachable(start, len); return ioremap_nocache(start, len); } -- cgit v1.2.3 From d2b176ed878d4d5fcc0bd35656dfd373f3702af9 Mon Sep 17 00:00:00 2001 From: Jes Sorensen Date: Tue, 28 Feb 2006 09:42:23 -0800 Subject: [IA64] sysctl option to silence unaligned trap warnings Allow sysadmin to disable all warnings about userland apps making unaligned accesses by using: # echo 1 > /proc/sys/kernel/ignore-unaligned-usertrap Rather than having to use prctl on a process by process basis. Default behaivour leaves the warnings enabled. Signed-off-by: Jes Sorensen Signed-off-by: Tony Luck --- arch/ia64/kernel/unaligned.c | 31 ++++++++++++++++++++++++++++--- 1 file changed, 28 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/unaligned.c b/arch/ia64/kernel/unaligned.c index 11291389684..1e357550c77 100644 --- a/arch/ia64/kernel/unaligned.c +++ b/arch/ia64/kernel/unaligned.c @@ -52,6 +52,15 @@ dump (const char *str, void *vp, size_t len) #define IA64_FIRST_ROTATING_FR 32 #define SIGN_EXT9 0xffffffffffffff00ul +/* + * sysctl settable hook which tells the kernel whether to honor the + * IA64_THREAD_UAC_NOPRINT prctl. Because this is user settable, we want + * to allow the super user to enable/disable this for security reasons + * (i.e. don't allow attacker to fill up logs with unaligned accesses). + */ +int no_unaligned_warning; +static int noprint_warning; + /* * For M-unit: * @@ -1324,8 +1333,9 @@ ia64_handle_unaligned (unsigned long ifa, struct pt_regs *regs) if ((current->thread.flags & IA64_THREAD_UAC_SIGBUS) != 0) goto force_sigbus; - if (!(current->thread.flags & IA64_THREAD_UAC_NOPRINT) - && within_logging_rate_limit()) + if (!no_unaligned_warning && + !(current->thread.flags & IA64_THREAD_UAC_NOPRINT) && + within_logging_rate_limit()) { char buf[200]; /* comm[] is at most 16 bytes... */ size_t len; @@ -1340,7 +1350,22 @@ ia64_handle_unaligned (unsigned long ifa, struct pt_regs *regs) if (user_mode(regs)) tty_write_message(current->signal->tty, buf); buf[len-1] = '\0'; /* drop '\r' */ - printk(KERN_WARNING "%s", buf); /* watch for command names containing %s */ + /* watch for command names containing %s */ + printk(KERN_WARNING "%s", buf); + } else { + if (no_unaligned_warning && !noprint_warning) { + noprint_warning = 1; + printk(KERN_WARNING "%s(%d) encountered an " + "unaligned exception which required\n" + "kernel assistance, which degrades " + "the performance of the application.\n" + "Unaligned exception warnings have " + "been disabled by the system " + "administrator\n" + "echo 0 > /proc/sys/kernel/ignore-" + "unaligned-usertrap to re-enable\n", + current->comm, current->pid); + } } } else { if (within_logging_rate_limit()) -- cgit v1.2.3 From 5cf6c541f5b3902bdcc2d311d70f8e730aaff1be Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Tue, 28 Feb 2006 16:58:53 -0800 Subject: [PATCH] x86 microcode driver vs hotplug CPUs. This driver loops over 'num_online_cpus', but it doesn't account for holes in the online map created by offlined cpus, and assumes that the cpu numbers stay linear. Signed-off-by: Dave Jones Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/microcode.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/microcode.c b/arch/i386/kernel/microcode.c index d3fdf0057d8..5390b521aca 100644 --- a/arch/i386/kernel/microcode.c +++ b/arch/i386/kernel/microcode.c @@ -74,6 +74,7 @@ #include #include #include +#include #include #include #include @@ -250,8 +251,8 @@ static int find_matching_ucodes (void) error = -EINVAL; goto out; } - - for (cpu_num = 0; cpu_num < num_online_cpus(); cpu_num++) { + + for_each_online_cpu(cpu_num) { struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num; if (uci->err != MC_NOTFOUND) /* already found a match or not an online cpu*/ continue; @@ -293,7 +294,7 @@ static int find_matching_ucodes (void) error = -EFAULT; goto out; } - for (cpu_num = 0; cpu_num < num_online_cpus(); cpu_num++) { + for_each_online_cpu(cpu_num) { struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num; if (uci->err != MC_NOTFOUND) /* already found a match or not an online cpu*/ continue; @@ -304,7 +305,9 @@ static int find_matching_ucodes (void) } } /* now check if any cpu has matched */ - for (cpu_num = 0, allocated_flag = 0, sum = 0; cpu_num < num_online_cpus(); cpu_num++) { + allocated_flag = 0; + sum = 0; + for_each_online_cpu(cpu_num) { if (ucode_cpu_info[cpu_num].err == MC_MARKED) { struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num; if (!allocated_flag) { @@ -415,12 +418,12 @@ static int do_microcode_update (void) } out_free: - for (i = 0; i < num_online_cpus(); i++) { + for_each_online_cpu(i) { if (ucode_cpu_info[i].mc) { int j; void *tmp = ucode_cpu_info[i].mc; vfree(tmp); - for (j = i; j < num_online_cpus(); j++) { + for_each_online_cpu(j) { if (ucode_cpu_info[j].mc == tmp) ucode_cpu_info[j].mc = NULL; } -- cgit v1.2.3 From 0551fbd29e16fccd46e41b7d01bf0f8f39b14212 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 28 Feb 2006 16:59:19 -0800 Subject: [PATCH] Add mm->task_size and fix powerpc vdso This patch adds mm->task_size to keep track of the task size of a given mm and uses that to fix the powerpc vdso so that it uses the mm task size to decide what pages to fault in instead of the current thread flags (which broke when ptracing). (akpm: I expect that mm_struct.task_size will become the way in which we finally sort out the confusion between 32-bit processes and 32-bit mm's. It may need tweaks, but at this stage this patch is powerpc-only.) Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/kernel/vdso.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c index f0c47dab090..04f7df39ffb 100644 --- a/arch/powerpc/kernel/vdso.c +++ b/arch/powerpc/kernel/vdso.c @@ -182,8 +182,8 @@ static struct page * vdso_vma_nopage(struct vm_area_struct * vma, unsigned long offset = address - vma->vm_start; struct page *pg; #ifdef CONFIG_PPC64 - void *vbase = test_thread_flag(TIF_32BIT) ? - vdso32_kbase : vdso64_kbase; + void *vbase = (vma->vm_mm->task_size > TASK_SIZE_USER32) ? + vdso64_kbase : vdso32_kbase; #else void *vbase = vdso32_kbase; #endif -- cgit v1.2.3