From ddd64159eb0d090766eee79b191a974ffdd83a42 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Thu, 17 Aug 2006 20:24:48 -0500 Subject: [POWERPC] Fix CDS IRQ handling and PCI code * Fix IRQ support in the 85xx CDS boards so it uses the new generic stuff * Fix PCI IRQ mapping to use the device tree * Disabled i8259 support to allow the CDS to boot. This will be fixed soon, but the current code doesn't even compile, so this is a vast improvement Signed-off-by: Andy Fleming Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/85xx/Kconfig | 1 - arch/powerpc/platforms/85xx/mpc85xx_cds.c | 210 +++++++++++++----------------- 2 files changed, 88 insertions(+), 123 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 454fc53289a..c3268d9877e 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -14,7 +14,6 @@ config MPC8540_ADS config MPC85xx_CDS bool "Freescale MPC85xx CDS" select DEFAULT_UIMAGE - select PPC_I8259 if PCI help This option enables support for the MPC85xx CDS board diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c index 18e6e11f702..1d357d32a29 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c @@ -57,94 +57,8 @@ unsigned long isa_mem_base = 0; static int cds_pci_slot = 2; static volatile u8 *cadmus; -/* - * Internal interrupts are all Level Sensitive, and Positive Polarity - * - * Note: Likely, this table and the following function should be - * obtained and derived from the OF Device Tree. - */ -static u_char mpc85xx_cds_openpic_initsenses[] __initdata = { - MPC85XX_INTERNAL_IRQ_SENSES, -#if defined(CONFIG_PCI) - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Ext 0: PCI slot 0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 1: PCI slot 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 2: PCI slot 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 3: PCI slot 3 */ -#else - 0x0, /* External 0: */ - 0x0, /* External 1: */ - 0x0, /* External 2: */ - 0x0, /* External 3: */ -#endif - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */ - 0x0, /* External 6: */ - 0x0, /* External 7: */ - 0x0, /* External 8: */ - 0x0, /* External 9: */ - 0x0, /* External 10: */ -#ifdef CONFIG_PCI - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 11: PCI2 slot 0 */ -#else - 0x0, /* External 11: */ -#endif -}; - #ifdef CONFIG_PCI -/* - * interrupt routing - */ -int -mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ - struct pci_controller *hose = pci_bus_to_hose(dev->bus->number); - - if (!hose->index) - { - /* Handle PCI1 interrupts */ - char pci_irq_table[][4] = - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - - /* Note IRQ assignment for slots is based on which slot the elysium is - * in -- in this setup elysium is in slot #2 (this PIRQA as first - * interrupt on slot */ - { - { 0, 1, 2, 3 }, /* 16 - PMC */ - { 0, 1, 2, 3 }, /* 17 P2P (Tsi320) */ - { 0, 1, 2, 3 }, /* 18 - Slot 1 */ - { 1, 2, 3, 0 }, /* 19 - Slot 2 */ - { 2, 3, 0, 1 }, /* 20 - Slot 3 */ - { 3, 0, 1, 2 }, /* 21 - Slot 4 */ - }; - - const long min_idsel = 16, max_idsel = 21, irqs_per_slot = 4; - int i, j; - - for (i = 0; i < 6; i++) - for (j = 0; j < 4; j++) - pci_irq_table[i][j] = - ((pci_irq_table[i][j] + 5 - - cds_pci_slot) & 0x3) + PIRQ0A; - - return PCI_IRQ_TABLE_LOOKUP; - } else { - /* Handle PCI2 interrupts (if we have one) */ - char pci_irq_table[][4] = - { - /* - * We only have one slot and one interrupt - * going to PIRQA - PIRQD */ - { PIRQ1A, PIRQ1A, PIRQ1A, PIRQ1A }, /* 21 - slot 0 */ - }; - - const long min_idsel = 21, max_idsel = 21, irqs_per_slot = 4; - - return PCI_IRQ_TABLE_LOOKUP; - } -} #define ARCADIA_HOST_BRIDGE_IDSEL 17 #define ARCADIA_2ND_BRIDGE_IDSEL 3 @@ -210,50 +124,104 @@ mpc85xx_cds_pcibios_fixup(void) pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11); pci_dev_put(dev); } + + /* Now map all the PCI irqs */ + dev = NULL; + for_each_pci_dev(dev) + pci_read_irq_line(dev); +} + +#ifdef CONFIG_PPC_I8259 +#warning The i8259 PIC support is currently broken +static void mpc85xx_8259_cascade(unsigned int irq, struct + irq_desc *desc, struct pt_regs *regs) +{ + unsigned int cascade_irq = i8259_irq(regs); + + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq, regs); + + desc->chip->eoi(irq); } +#endif /* PPC_I8259 */ #endif /* CONFIG_PCI */ void __init mpc85xx_cds_pic_init(void) { - struct mpic *mpic1; - phys_addr_t OpenPIC_PAddr; + struct mpic *mpic; + struct resource r; + struct device_node *np = NULL; + struct device_node *cascade_node = NULL; + int cascade_irq; - /* Determine the Physical Address of the OpenPIC regs */ - OpenPIC_PAddr = get_immrbase() + MPC85xx_OPENPIC_OFFSET; + np = of_find_node_by_type(np, "open-pic"); + + if (np == NULL) { + printk(KERN_ERR "Could not find open-pic node\n"); + return; + } - mpic1 = mpic_alloc(OpenPIC_PAddr, + if (of_address_to_resource(np, 0, &r)) { + printk(KERN_ERR "Failed to map mpic register space\n"); + of_node_put(np); + return; + } + + mpic = mpic_alloc(np, r.start, MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, - 4, MPC85xx_OPENPIC_IRQ_OFFSET, 0, 250, - mpc85xx_cds_openpic_initsenses, - sizeof(mpc85xx_cds_openpic_initsenses), " OpenPIC "); - BUG_ON(mpic1 == NULL); - mpic_assign_isu(mpic1, 0, OpenPIC_PAddr + 0x10200); - mpic_assign_isu(mpic1, 1, OpenPIC_PAddr + 0x10280); - mpic_assign_isu(mpic1, 2, OpenPIC_PAddr + 0x10300); - mpic_assign_isu(mpic1, 3, OpenPIC_PAddr + 0x10380); - mpic_assign_isu(mpic1, 4, OpenPIC_PAddr + 0x10400); - mpic_assign_isu(mpic1, 5, OpenPIC_PAddr + 0x10480); - mpic_assign_isu(mpic1, 6, OpenPIC_PAddr + 0x10500); - mpic_assign_isu(mpic1, 7, OpenPIC_PAddr + 0x10580); - - /* dummy mappings to get to 48 */ - mpic_assign_isu(mpic1, 8, OpenPIC_PAddr + 0x10600); - mpic_assign_isu(mpic1, 9, OpenPIC_PAddr + 0x10680); - mpic_assign_isu(mpic1, 10, OpenPIC_PAddr + 0x10700); - mpic_assign_isu(mpic1, 11, OpenPIC_PAddr + 0x10780); - - /* External ints */ - mpic_assign_isu(mpic1, 12, OpenPIC_PAddr + 0x10000); - mpic_assign_isu(mpic1, 13, OpenPIC_PAddr + 0x10080); - mpic_assign_isu(mpic1, 14, OpenPIC_PAddr + 0x10100); - - mpic_init(mpic1); + 4, 0, " OpenPIC "); + BUG_ON(mpic == NULL); + + /* Return the mpic node */ + of_node_put(np); + + mpic_assign_isu(mpic, 0, r.start + 0x10200); + mpic_assign_isu(mpic, 1, r.start + 0x10280); + mpic_assign_isu(mpic, 2, r.start + 0x10300); + mpic_assign_isu(mpic, 3, r.start + 0x10380); + mpic_assign_isu(mpic, 4, r.start + 0x10400); + mpic_assign_isu(mpic, 5, r.start + 0x10480); + mpic_assign_isu(mpic, 6, r.start + 0x10500); + mpic_assign_isu(mpic, 7, r.start + 0x10580); + + /* Used only for 8548 so far, but no harm in + * allocating them for everyone */ + mpic_assign_isu(mpic, 8, r.start + 0x10600); + mpic_assign_isu(mpic, 9, r.start + 0x10680); + mpic_assign_isu(mpic, 10, r.start + 0x10700); + mpic_assign_isu(mpic, 11, r.start + 0x10780); + + /* External Interrupts */ + mpic_assign_isu(mpic, 12, r.start + 0x10000); + mpic_assign_isu(mpic, 13, r.start + 0x10080); + mpic_assign_isu(mpic, 14, r.start + 0x10100); + + mpic_init(mpic); + +#ifdef CONFIG_PPC_I8259 + /* Initialize the i8259 controller */ + for_each_node_by_type(np, "interrupt-controller") + if (device_is_compatible(np, "chrp,iic")) { + cascade_node = np; + break; + } + + if (cascade_node == NULL) { + printk(KERN_DEBUG "Could not find i8259 PIC\n"); + return; + } -#ifdef CONFIG_PCI - mpic_setup_cascade(PIRQ0A, i8259_irq_cascade, NULL); + cascade_irq = irq_of_parse_and_map(cascade_node, 0); + if (cascade_irq == NO_IRQ) { + printk(KERN_ERR "Failed to map cascade interrupt\n"); + return; + } - i8259_init(0,0); -#endif + i8259_init(cascade_node, 0); + of_node_put(cascade_node); + + set_irq_chained_handler(cascade_irq, mpc85xx_8259_cascade); +#endif /* CONFIG_PPC_I8259 */ } @@ -298,8 +266,6 @@ mpc85xx_cds_setup_arch(void) add_bridge(np); ppc_md.pcibios_fixup = mpc85xx_cds_pcibios_fixup; - ppc_md.pci_swizzle = common_swizzle; - ppc_md.pci_map_irq = mpc85xx_map_irq; ppc_md.pci_exclude_device = mpc85xx_exclude_device; #endif -- cgit v1.2.3