From 4dbd5b751767bf88ffdda5d55646738871c751ad Mon Sep 17 00:00:00 2001
From: Lars-Peter Clausen <lars@metafoo.de>
Date: Wed, 23 Sep 2009 14:27:26 +0200
Subject: Add ar6000 wireless driver.

---
 drivers/ar6000/include/dsetid.h | 110 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 110 insertions(+)
 create mode 100644 drivers/ar6000/include/dsetid.h

(limited to 'drivers/ar6000/include/dsetid.h')

diff --git a/drivers/ar6000/include/dsetid.h b/drivers/ar6000/include/dsetid.h
new file mode 100644
index 00000000000..85729f8b3d0
--- /dev/null
+++ b/drivers/ar6000/include/dsetid.h
@@ -0,0 +1,110 @@
+/*
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ */
+
+#ifndef __DSETID_H__
+#define __DSETID_H__
+
+/* Well-known DataSet IDs */
+#define DSETID_UNUSED                     0x00000000
+#define DSETID_BOARD_DATA                 0x00000001 /* Cal and board data */
+#define DSETID_REGDB                      0x00000002 /* Regulatory Database */
+#define DSETID_POWER_CONTROL              0x00000003 /* TX Pwr Lim & Ant Gain */
+#define DSETID_USER_CONFIG                0x00000004 /* User Configuration */
+
+#define DSETID_ANALOG_CONTROL_DATA_START  0x00000005
+#define DSETID_ANALOG_CONTROL_DATA_END    0x00000025
+/*
+ * Get DSETID for various reference clock speeds.
+ * For each speed there are three DataSets that correspond
+ * to the three columns of bank6 data (addr, 11a, 11b/g).
+ * This macro returns the dsetid of the first of those
+ * three DataSets.
+ */
+#define ANALOG_CONTROL_DATA_DSETID(refclk) \
+        (DSETID_ANALOG_CONTROL_DATA_START + 3*refclk)
+
+/*
+ * There are TWO STARTUP_PATCH DataSets.
+ * DSETID_STARTUP_PATCH is historical, and was applied before BMI on
+ * earlier systems.  On AR6002, it is applied after BMI, just like
+ * DSETID_STARTUP_PATCH2.
+ */
+#define DSETID_STARTUP_PATCH              0x00000026
+#define DSETID_GPIO_CONFIG_PATCH          0x00000027
+#define DSETID_WLANREGS                   0x00000028 /* override wlan regs */
+#define DSETID_STARTUP_PATCH2             0x00000029
+
+#define DSETID_WOW_CONFIG                 0x00000090 /* WoW Configuration */
+
+/* Add WHAL_INI_DATA_ID to DSETID_INI_DATA for a specific WHAL INI table. */
+#define DSETID_INI_DATA                   0x00000100
+/* Reserved for WHAL INI Tables: 0x100..0x11f */
+#define DSETID_INI_DATA_END               0x0000011f
+
+#define DSETID_VENDOR_START               0x00010000 /* Vendor-defined DataSets */
+
+#define DSETID_INDEX_END                  0xfffffffe /* Reserved to indicate the
+                                                        end of a memory-based
+                                                        DataSet Index */
+#define DSETID_INDEX_FREE                 0xffffffff /* An unused index entry */
+
+/*
+ * PATCH DataSet format:
+ * A list of patches, terminated by a patch with
+ * address=PATCH_END.
+ *
+ * This allows for patches to be stored in flash.
+ */
+struct patch_s {
+    A_UINT32 *address;
+    A_UINT32  data;
+};
+
+/*
+ * Skip some patches.  Can be used to erase a single patch in a
+ * patch DataSet without having to re-write the DataSet.  May
+ * also be used to embed information for use by subsequent
+ * patch code.  The "data" in a PATCH_SKIP tells how many
+ * bytes of length "patch_s" to skip.
+ */
+#define PATCH_SKIP      ((A_UINT32 *)0x00000000)
+
+/*
+ * Execute code at the address specified by "data".
+ * The address of the patch structure is passed as
+ * the one parameter.
+ */
+#define PATCH_CODE_ABS  ((A_UINT32 *)0x00000001)
+
+/*
+ * Same as PATCH_CODE_ABS, but treat "data" as an
+ * offset from the start of the patch word.
+ */
+#define PATCH_CODE_REL  ((A_UINT32 *)0x00000002)
+
+/* Mark the end of this patch DataSet. */
+#define PATCH_END       ((A_UINT32 *)0xffffffff)
+
+/*
+ * A DataSet which contains a Binary Patch to some other DataSet
+ * uses the original dsetid with the DSETID_BPATCH_FLAG bit set.
+ * Such a BPatch DataSet consists of BPatch metadata followed by
+ * the bdiff bytes.  BPatch metadata consists of a single 32-bit
+ * word that contains the size of the BPatched final image.
+ *
+ * To create a suitable bdiff DataSet, use bdiff in host/tools/bdiff
+ * to create "diffs":
+ *  bdiff -q -O -nooldmd5 -nonewmd5 -d ORIGfile NEWfile diffs
+ * Then add BPatch metadata to the start of "diffs".
+ *
+ * NB: There are some implementation-induced restrictions
+ * on which DataSets can be BPatched.
+ */
+#define DSETID_BPATCH_FLAG                0x80000000
+
+#endif /* __DSETID_H__ */
-- 
cgit v1.2.3