From 0d5ff566779f894ca9937231a181eb31e4adff0e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 1 Feb 2007 15:06:36 +0900 Subject: libata: convert to iomap Convert libata core layer and LLDs to use iomap. * managed iomap is used. Pointer to pcim_iomap_table() is cached at host->iomap and used through out LLDs. This basically replaces host->mmio_base. * if possible, pcim_iomap_regions() is used Most iomap operation conversions are taken from Jeff Garzik 's iomap branch. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/pata_pdc2027x.c | 63 ++++++++++++++++++++++----------------------- 1 file changed, 31 insertions(+), 32 deletions(-) (limited to 'drivers/ata/pata_pdc2027x.c') diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c index 1c106b866c7..2ff91bbbab0 100644 --- a/drivers/ata/pata_pdc2027x.c +++ b/drivers/ata/pata_pdc2027x.c @@ -45,6 +45,8 @@ #endif enum { + PDC_MMIO_BAR = 5, + PDC_UDMA_100 = 0, PDC_UDMA_133 = 1, @@ -158,7 +160,7 @@ static struct ata_port_operations pdc2027x_pata100_ops = { .bmdma_status = ata_bmdma_status, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_mmio_data_xfer, + .data_xfer = ata_data_xfer, .freeze = ata_bmdma_freeze, .thaw = ata_bmdma_thaw, @@ -190,7 +192,7 @@ static struct ata_port_operations pdc2027x_pata133_ops = { .bmdma_status = ata_bmdma_status, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_mmio_data_xfer, + .data_xfer = ata_data_xfer, .freeze = ata_bmdma_freeze, .thaw = ata_bmdma_thaw, @@ -239,7 +241,7 @@ MODULE_DEVICE_TABLE(pci, pdc2027x_pci_tbl); */ static inline void __iomem *port_mmio(struct ata_port *ap, unsigned int offset) { - return ap->host->mmio_base + ap->port_no * 0x100 + offset; + return ap->host->iomap[PDC_MMIO_BAR] + ap->port_no * 0x100 + offset; } /** @@ -520,18 +522,19 @@ static int pdc2027x_check_atapi_dma(struct ata_queued_cmd *qc) static long pdc_read_counter(struct ata_probe_ent *probe_ent) { + void __iomem *mmio_base = probe_ent->iomap[PDC_MMIO_BAR]; long counter; int retry = 1; u32 bccrl, bccrh, bccrlv, bccrhv; retry: - bccrl = readl(probe_ent->mmio_base + PDC_BYTE_COUNT) & 0xffff; - bccrh = readl(probe_ent->mmio_base + PDC_BYTE_COUNT + 0x100) & 0xffff; + bccrl = readl(mmio_base + PDC_BYTE_COUNT) & 0xffff; + bccrh = readl(mmio_base + PDC_BYTE_COUNT + 0x100) & 0xffff; rmb(); /* Read the counter values again for verification */ - bccrlv = readl(probe_ent->mmio_base + PDC_BYTE_COUNT) & 0xffff; - bccrhv = readl(probe_ent->mmio_base + PDC_BYTE_COUNT + 0x100) & 0xffff; + bccrlv = readl(mmio_base + PDC_BYTE_COUNT) & 0xffff; + bccrhv = readl(mmio_base + PDC_BYTE_COUNT + 0x100) & 0xffff; rmb(); counter = (bccrh << 15) | bccrl; @@ -562,7 +565,7 @@ retry: */ static void pdc_adjust_pll(struct ata_probe_ent *probe_ent, long pll_clock, unsigned int board_idx) { - + void __iomem *mmio_base = probe_ent->iomap[PDC_MMIO_BAR]; u16 pll_ctl; long pll_clock_khz = pll_clock / 1000; long pout_required = board_idx? PDC_133_MHZ:PDC_100_MHZ; @@ -581,7 +584,7 @@ static void pdc_adjust_pll(struct ata_probe_ent *probe_ent, long pll_clock, unsi /* Show the current clock value of PLL control register * (maybe already configured by the firmware) */ - pll_ctl = readw(probe_ent->mmio_base + PDC_PLL_CTL); + pll_ctl = readw(mmio_base + PDC_PLL_CTL); PDPRINTK("pll_ctl[%X]\n", pll_ctl); #endif @@ -621,8 +624,8 @@ static void pdc_adjust_pll(struct ata_probe_ent *probe_ent, long pll_clock, unsi PDPRINTK("Writing pll_ctl[%X]\n", pll_ctl); - writew(pll_ctl, probe_ent->mmio_base + PDC_PLL_CTL); - readw(probe_ent->mmio_base + PDC_PLL_CTL); /* flush */ + writew(pll_ctl, mmio_base + PDC_PLL_CTL); + readw(mmio_base + PDC_PLL_CTL); /* flush */ /* Wait the PLL circuit to be stable */ mdelay(30); @@ -632,7 +635,7 @@ static void pdc_adjust_pll(struct ata_probe_ent *probe_ent, long pll_clock, unsi * Show the current clock value of PLL control register * (maybe configured by the firmware) */ - pll_ctl = readw(probe_ent->mmio_base + PDC_PLL_CTL); + pll_ctl = readw(mmio_base + PDC_PLL_CTL); PDPRINTK("pll_ctl[%X]\n", pll_ctl); #endif @@ -648,6 +651,7 @@ static void pdc_adjust_pll(struct ata_probe_ent *probe_ent, long pll_clock, unsi */ static long pdc_detect_pll_input_clock(struct ata_probe_ent *probe_ent) { + void __iomem *mmio_base = probe_ent->iomap[PDC_MMIO_BAR]; u32 scr; long start_count, end_count; long pll_clock; @@ -656,10 +660,10 @@ static long pdc_detect_pll_input_clock(struct ata_probe_ent *probe_ent) start_count = pdc_read_counter(probe_ent); /* Start the test mode */ - scr = readl(probe_ent->mmio_base + PDC_SYS_CTL); + scr = readl(mmio_base + PDC_SYS_CTL); PDPRINTK("scr[%X]\n", scr); - writel(scr | (0x01 << 14), probe_ent->mmio_base + PDC_SYS_CTL); - readl(probe_ent->mmio_base + PDC_SYS_CTL); /* flush */ + writel(scr | (0x01 << 14), mmio_base + PDC_SYS_CTL); + readl(mmio_base + PDC_SYS_CTL); /* flush */ /* Let the counter run for 100 ms. */ mdelay(100); @@ -668,10 +672,10 @@ static long pdc_detect_pll_input_clock(struct ata_probe_ent *probe_ent) end_count = pdc_read_counter(probe_ent); /* Stop the test mode */ - scr = readl(probe_ent->mmio_base + PDC_SYS_CTL); + scr = readl(mmio_base + PDC_SYS_CTL); PDPRINTK("scr[%X]\n", scr); - writel(scr & ~(0x01 << 14), probe_ent->mmio_base + PDC_SYS_CTL); - readl(probe_ent->mmio_base + PDC_SYS_CTL); /* flush */ + writel(scr & ~(0x01 << 14), mmio_base + PDC_SYS_CTL); + readl(mmio_base + PDC_SYS_CTL); /* flush */ /* calculate the input clock in Hz */ pll_clock = (start_count - end_count) * 10; @@ -716,7 +720,7 @@ static int pdc_hardware_init(struct pci_dev *pdev, struct ata_probe_ent *pe, uns * @port: ata ioports to setup * @base: base address */ -static void pdc_ata_setup_port(struct ata_ioports *port, unsigned long base) +static void pdc_ata_setup_port(struct ata_ioports *port, void __iomem *base) { port->cmd_addr = port->data_addr = base; @@ -750,7 +754,6 @@ static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_de unsigned int board_idx = (unsigned int) ent->driver_data; struct ata_probe_ent *probe_ent; - unsigned long base; void __iomem *mmio_base; int rc; @@ -761,7 +764,7 @@ static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_de if (rc) return rc; - rc = pci_request_regions(pdev, DRV_NAME); + rc = pcim_iomap_regions(pdev, 1 << PDC_MMIO_BAR, DRV_NAME); if (rc) return rc; @@ -781,12 +784,6 @@ static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_de probe_ent->dev = pci_dev_to_dev(pdev); INIT_LIST_HEAD(&probe_ent->node); - mmio_base = pcim_iomap(pdev, 5, 0); - if (!mmio_base) - return -ENOMEM; - - base = (unsigned long) mmio_base; - probe_ent->sht = pdc2027x_port_info[board_idx].sht; probe_ent->port_flags = pdc2027x_port_info[board_idx].flags; probe_ent->pio_mask = pdc2027x_port_info[board_idx].pio_mask; @@ -796,12 +793,14 @@ static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_de probe_ent->irq = pdev->irq; probe_ent->irq_flags = SA_SHIRQ; - probe_ent->mmio_base = mmio_base; + probe_ent->iomap = pcim_iomap_table(pdev); + + mmio_base = probe_ent->iomap[PDC_MMIO_BAR]; - pdc_ata_setup_port(&probe_ent->port[0], base + 0x17c0); - probe_ent->port[0].bmdma_addr = base + 0x1000; - pdc_ata_setup_port(&probe_ent->port[1], base + 0x15c0); - probe_ent->port[1].bmdma_addr = base + 0x1008; + pdc_ata_setup_port(&probe_ent->port[0], mmio_base + 0x17c0); + probe_ent->port[0].bmdma_addr = mmio_base + 0x1000; + pdc_ata_setup_port(&probe_ent->port[1], mmio_base + 0x15c0); + probe_ent->port[1].bmdma_addr = mmio_base + 0x1008; probe_ent->n_ports = 2; -- cgit v1.2.3