From 624d5c514eed18d5a93062e9d86d67065175f30a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 25 Mar 2008 22:16:41 +0900 Subject: libata: reorganize SFF related stuff * Move SFF related functions from libata-core.c to libata-sff.c. ata_[bmdma_]sff_port_ops, ata_devchk(), ata_dev_try_classify(), ata_std_dev_select(), ata_tf_to_host(), ata_busy_sleep(), ata_wait_after_reset(), ata_wait_ready(), ata_bus_post_reset(), ata_bus_softreset(), ata_bus_reset(), ata_std_softreset(), sata_std_hardreset(), ata_fill_sg(), ata_fill_sg_dumb(), ata_qc_prep(), ata_dump_qc_prep(), ata_data_xfer(), ata_data_xfer_noirq(), ata_pio_sector(), ata_pio_sectors(), atapi_send_cdb(), __atapi_pio_bytes(), atapi_pio_bytes(), ata_hsm_ok_in_wq(), ata_hsm_qc_complete(), ata_hsm_move(), ata_pio_task(), ata_qc_issue_prot(), ata_host_intr(), ata_interrupt(), ata_std_ports() * Make ata_pio_queue_task() global as it's now called from libata-sff.c. * Move SFF related stuff in include/linux/libata.h and drivers/ata/libata.h into one place. While at it, move timing constants into the global enum definition and fortify comments a bit. This patch strictly moves stuff around and as such doesn't cause any functional difference. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 2114 +++----------------------------------------- drivers/ata/libata-sff.c | 2151 +++++++++++++++++++++++++++++++++++++++++---- drivers/ata/libata.h | 8 +- 3 files changed, 2131 insertions(+), 2142 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 7860d9f60ae..34c068f1835 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -46,7 +46,6 @@ #include #include #include -#include #include #include #include @@ -98,41 +97,6 @@ const struct ata_port_operations sata_pmp_port_ops = { .error_handler = sata_pmp_error_handler, }; -const struct ata_port_operations ata_sff_port_ops = { - .inherits = &ata_base_port_ops, - - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, - - .freeze = ata_bmdma_freeze, - .thaw = ata_bmdma_thaw, - .softreset = ata_std_softreset, - .error_handler = ata_bmdma_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, - - .dev_select = ata_std_dev_select, - .check_status = ata_check_status, - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .exec_command = ata_exec_command, - .data_xfer = ata_data_xfer, - .irq_on = ata_irq_on, - - .port_start = ata_sff_port_start, -}; - -const struct ata_port_operations ata_bmdma_port_ops = { - .inherits = &ata_sff_port_ops, - - .mode_filter = ata_pci_default_filter, - - .bmdma_setup = ata_bmdma_setup, - .bmdma_start = ata_bmdma_start, - .bmdma_stop = ata_bmdma_stop, - .bmdma_status = ata_bmdma_status, - .irq_clear = ata_bmdma_irq_clear, -}; - static unsigned int ata_dev_init_params(struct ata_device *dev, u16 heads, u16 sectors); static unsigned int ata_dev_set_xfermode(struct ata_device *dev); @@ -422,6 +386,14 @@ int atapi_cmd_type(u8 opcode) } } +/** + * ata_noop_irq_clear - Noop placeholder for irq_clear + * @ap: Port associated with this ATA transaction. + */ +void ata_noop_irq_clear(struct ata_port *ap) +{ +} + /** * ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure * @tf: Taskfile to convert @@ -1102,50 +1074,6 @@ static void ata_lpm_disable(struct ata_host *host) } #endif /* CONFIG_PM */ - -/** - * ata_devchk - PATA device presence detection - * @ap: ATA channel to examine - * @device: Device to examine (starting at zero) - * - * This technique was originally described in - * Hale Landis's ATADRVR (www.ata-atapi.com), and - * later found its way into the ATA/ATAPI spec. - * - * Write a pattern to the ATA shadow registers, - * and if a device is present, it will respond by - * correctly storing and echoing back the - * ATA shadow register contents. - * - * LOCKING: - * caller. - */ - -static unsigned int ata_devchk(struct ata_port *ap, unsigned int device) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - u8 nsect, lbal; - - ap->ops->dev_select(ap, device); - - iowrite8(0x55, ioaddr->nsect_addr); - iowrite8(0xaa, ioaddr->lbal_addr); - - iowrite8(0xaa, ioaddr->nsect_addr); - iowrite8(0x55, ioaddr->lbal_addr); - - iowrite8(0x55, ioaddr->nsect_addr); - iowrite8(0xaa, ioaddr->lbal_addr); - - nsect = ioread8(ioaddr->nsect_addr); - lbal = ioread8(ioaddr->lbal_addr); - - if ((nsect == 0x55) && (lbal == 0xaa)) - return 1; /* we found a device */ - - return 0; /* nothing found */ -} - /** * ata_dev_classify - determine device type based on ATA-spec signature * @tf: ATA taskfile register set for device to be identified @@ -1205,75 +1133,6 @@ unsigned int ata_dev_classify(const struct ata_taskfile *tf) return ATA_DEV_UNKNOWN; } -/** - * ata_dev_try_classify - Parse returned ATA device signature - * @dev: ATA device to classify (starting at zero) - * @present: device seems present - * @r_err: Value of error register on completion - * - * After an event -- SRST, E.D.D., or SATA COMRESET -- occurs, - * an ATA/ATAPI-defined set of values is placed in the ATA - * shadow registers, indicating the results of device detection - * and diagnostics. - * - * Select the ATA device, and read the values from the ATA shadow - * registers. Then parse according to the Error register value, - * and the spec-defined values examined by ata_dev_classify(). - * - * LOCKING: - * caller. - * - * RETURNS: - * Device type - %ATA_DEV_ATA, %ATA_DEV_ATAPI or %ATA_DEV_NONE. - */ -unsigned int ata_dev_try_classify(struct ata_device *dev, int present, - u8 *r_err) -{ - struct ata_port *ap = dev->link->ap; - struct ata_taskfile tf; - unsigned int class; - u8 err; - - ap->ops->dev_select(ap, dev->devno); - - memset(&tf, 0, sizeof(tf)); - - ap->ops->tf_read(ap, &tf); - err = tf.feature; - if (r_err) - *r_err = err; - - /* see if device passed diags: continue and warn later */ - if (err == 0) - /* diagnostic fail : do nothing _YET_ */ - dev->horkage |= ATA_HORKAGE_DIAGNOSTIC; - else if (err == 1) - /* do nothing */ ; - else if ((dev->devno == 0) && (err == 0x81)) - /* do nothing */ ; - else - return ATA_DEV_NONE; - - /* determine if device is ATA or ATAPI */ - class = ata_dev_classify(&tf); - - if (class == ATA_DEV_UNKNOWN) { - /* If the device failed diagnostic, it's likely to - * have reported incorrect device signature too. - * Assume ATA device if the device seems present but - * device signature is invalid with diagnostic - * failure. - */ - if (present && (dev->horkage & ATA_HORKAGE_DIAGNOSTIC)) - class = ATA_DEV_ATA; - else - class = ATA_DEV_NONE; - } else if ((class == ATA_DEV_ATA) && (ata_chk_status(ap) == 0)) - class = ATA_DEV_NONE; - - return class; -} - /** * ata_id_string - Convert IDENTIFY DEVICE page into string * @id: IDENTIFY DEVICE results we will examine @@ -1597,73 +1456,6 @@ void ata_noop_dev_select(struct ata_port *ap, unsigned int device) { } - -/** - * ata_std_dev_select - Select device 0/1 on ATA bus - * @ap: ATA channel to manipulate - * @device: ATA device (numbered from zero) to select - * - * Use the method defined in the ATA specification to - * make either device 0, or device 1, active on the - * ATA channel. Works with both PIO and MMIO. - * - * May be used as the dev_select() entry in ata_port_operations. - * - * LOCKING: - * caller. - */ - -void ata_std_dev_select(struct ata_port *ap, unsigned int device) -{ - u8 tmp; - - if (device == 0) - tmp = ATA_DEVICE_OBS; - else - tmp = ATA_DEVICE_OBS | ATA_DEV1; - - iowrite8(tmp, ap->ioaddr.device_addr); - ata_pause(ap); /* needed; also flushes, for mmio */ -} - -/** - * ata_dev_select - Select device 0/1 on ATA bus - * @ap: ATA channel to manipulate - * @device: ATA device (numbered from zero) to select - * @wait: non-zero to wait for Status register BSY bit to clear - * @can_sleep: non-zero if context allows sleeping - * - * Use the method defined in the ATA specification to - * make either device 0, or device 1, active on the - * ATA channel. - * - * This is a high-level version of ata_std_dev_select(), - * which additionally provides the services of inserting - * the proper pauses and status polling, where needed. - * - * LOCKING: - * caller. - */ - -void ata_dev_select(struct ata_port *ap, unsigned int device, - unsigned int wait, unsigned int can_sleep) -{ - if (ata_msg_probe(ap)) - ata_port_printk(ap, KERN_INFO, "ata_dev_select: ENTER, " - "device %u, wait %u\n", device, wait); - - if (wait) - ata_wait_idle(ap); - - ap->ops->dev_select(ap, device); - - if (wait) { - if (can_sleep && ap->link.device[device].class == ATA_DEV_ATAPI) - msleep(150); - ata_wait_idle(ap); - } -} - /** * ata_dump_id - IDENTIFY DEVICE info debugging output * @id: IDENTIFY DEVICE page to dump @@ -1791,8 +1583,7 @@ unsigned long ata_id_xfermask(const u16 *id) * LOCKING: * Inherited from caller. */ -static void ata_pio_queue_task(struct ata_port *ap, void *data, - unsigned long delay) +void ata_pio_queue_task(struct ata_port *ap, void *data, unsigned long delay) { ap->port_task_data = data; @@ -3531,353 +3322,6 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) return rc; } -/** - * ata_tf_to_host - issue ATA taskfile to host controller - * @ap: port to which command is being issued - * @tf: ATA taskfile register set - * - * Issues ATA taskfile register set to ATA host controller, - * with proper synchronization with interrupt handler and - * other threads. - * - * LOCKING: - * spin_lock_irqsave(host lock) - */ - -static inline void ata_tf_to_host(struct ata_port *ap, - const struct ata_taskfile *tf) -{ - ap->ops->tf_load(ap, tf); - ap->ops->exec_command(ap, tf); -} - -/** - * ata_busy_sleep - sleep until BSY clears, or timeout - * @ap: port containing status register to be polled - * @tmout_pat: impatience timeout - * @tmout: overall timeout - * - * Sleep until ATA Status register bit BSY clears, - * or a timeout occurs. - * - * LOCKING: - * Kernel thread context (may sleep). - * - * RETURNS: - * 0 on success, -errno otherwise. - */ -int ata_busy_sleep(struct ata_port *ap, - unsigned long tmout_pat, unsigned long tmout) -{ - unsigned long timer_start, timeout; - u8 status; - - status = ata_busy_wait(ap, ATA_BUSY, 300); - timer_start = jiffies; - timeout = timer_start + tmout_pat; - while (status != 0xff && (status & ATA_BUSY) && - time_before(jiffies, timeout)) { - msleep(50); - status = ata_busy_wait(ap, ATA_BUSY, 3); - } - - if (status != 0xff && (status & ATA_BUSY)) - ata_port_printk(ap, KERN_WARNING, - "port is slow to respond, please be patient " - "(Status 0x%x)\n", status); - - timeout = timer_start + tmout; - while (status != 0xff && (status & ATA_BUSY) && - time_before(jiffies, timeout)) { - msleep(50); - status = ata_chk_status(ap); - } - - if (status == 0xff) - return -ENODEV; - - if (status & ATA_BUSY) { - ata_port_printk(ap, KERN_ERR, "port failed to respond " - "(%lu secs, Status 0x%x)\n", - tmout / HZ, status); - return -EBUSY; - } - - return 0; -} - -/** - * ata_wait_after_reset - wait before checking status after reset - * @ap: port containing status register to be polled - * @deadline: deadline jiffies for the operation - * - * After reset, we need to pause a while before reading status. - * Also, certain combination of controller and device report 0xff - * for some duration (e.g. until SATA PHY is up and running) - * which is interpreted as empty port in ATA world. This - * function also waits for such devices to get out of 0xff - * status. - * - * LOCKING: - * Kernel thread context (may sleep). - */ -void ata_wait_after_reset(struct ata_port *ap, unsigned long deadline) -{ - unsigned long until = jiffies + ATA_TMOUT_FF_WAIT; - - if (time_before(until, deadline)) - deadline = until; - - /* Spec mandates ">= 2ms" before checking status. We wait - * 150ms, because that was the magic delay used for ATAPI - * devices in Hale Landis's ATADRVR, for the period of time - * between when the ATA command register is written, and then - * status is checked. Because waiting for "a while" before - * checking status is fine, post SRST, we perform this magic - * delay here as well. - * - * Old drivers/ide uses the 2mS rule and then waits for ready. - */ - msleep(150); - - /* Wait for 0xff to clear. Some SATA devices take a long time - * to clear 0xff after reset. For example, HHD424020F7SV00 - * iVDR needs >= 800ms while. Quantum GoVault needs even more - * than that. - * - * Note that some PATA controllers (pata_ali) explode if - * status register is read more than once when there's no - * device attached. - */ - if (ap->flags & ATA_FLAG_SATA) { - while (1) { - u8 status = ata_chk_status(ap); - - if (status != 0xff || time_after(jiffies, deadline)) - return; - - msleep(50); - } - } -} - -/** - * ata_wait_ready - sleep until BSY clears, or timeout - * @ap: port containing status register to be polled - * @deadline: deadline jiffies for the operation - * - * Sleep until ATA Status register bit BSY clears, or timeout - * occurs. - * - * LOCKING: - * Kernel thread context (may sleep). - * - * RETURNS: - * 0 on success, -errno otherwise. - */ -int ata_wait_ready(struct ata_port *ap, unsigned long deadline) -{ - unsigned long start = jiffies; - int warned = 0; - - while (1) { - u8 status = ata_chk_status(ap); - unsigned long now = jiffies; - - if (!(status & ATA_BUSY)) - return 0; - if (!ata_link_online(&ap->link) && status == 0xff) - return -ENODEV; - if (time_after(now, deadline)) - return -EBUSY; - - if (!warned && time_after(now, start + 5 * HZ) && - (deadline - now > 3 * HZ)) { - ata_port_printk(ap, KERN_WARNING, - "port is slow to respond, please be patient " - "(Status 0x%x)\n", status); - warned = 1; - } - - msleep(50); - } -} - -static int ata_bus_post_reset(struct ata_port *ap, unsigned int devmask, - unsigned long deadline) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int dev0 = devmask & (1 << 0); - unsigned int dev1 = devmask & (1 << 1); - int rc, ret = 0; - - /* if device 0 was found in ata_devchk, wait for its - * BSY bit to clear - */ - if (dev0) { - rc = ata_wait_ready(ap, deadline); - if (rc) { - if (rc != -ENODEV) - return rc; - ret = rc; - } - } - - /* if device 1 was found in ata_devchk, wait for register - * access briefly, then wait for BSY to clear. - */ - if (dev1) { - int i; - - ap->ops->dev_select(ap, 1); - - /* Wait for register access. Some ATAPI devices fail - * to set nsect/lbal after reset, so don't waste too - * much time on it. We're gonna wait for !BSY anyway. - */ - for (i = 0; i < 2; i++) { - u8 nsect, lbal; - - nsect = ioread8(ioaddr->nsect_addr); - lbal = ioread8(ioaddr->lbal_addr); - if ((nsect == 1) && (lbal == 1)) - break; - msleep(50); /* give drive a breather */ - } - - rc = ata_wait_ready(ap, deadline); - if (rc) { - if (rc != -ENODEV) - return rc; - ret = rc; - } - } - - /* is all this really necessary? */ - ap->ops->dev_select(ap, 0); - if (dev1) - ap->ops->dev_select(ap, 1); - if (dev0) - ap->ops->dev_select(ap, 0); - - return ret; -} - -static int ata_bus_softreset(struct ata_port *ap, unsigned int devmask, - unsigned long deadline) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - - DPRINTK("ata%u: bus reset via SRST\n", ap->print_id); - - /* software reset. causes dev0 to be selected */ - iowrite8(ap->ctl, ioaddr->ctl_addr); - udelay(20); /* FIXME: flush */ - iowrite8(ap->ctl | ATA_SRST, ioaddr->ctl_addr); - udelay(20); /* FIXME: flush */ - iowrite8(ap->ctl, ioaddr->ctl_addr); - - /* wait a while before checking status */ - ata_wait_after_reset(ap, deadline); - - /* Before we perform post reset processing we want to see if - * the bus shows 0xFF because the odd clown forgets the D7 - * pulldown resistor. - */ - if (ata_chk_status(ap) == 0xFF) - return -ENODEV; - - return ata_bus_post_reset(ap, devmask, deadline); -} - -/** - * ata_bus_reset - reset host port and associated ATA channel - * @ap: port to reset - * - * This is typically the first time we actually start issuing - * commands to the ATA channel. We wait for BSY to clear, then - * issue EXECUTE DEVICE DIAGNOSTIC command, polling for its - * result. Determine what devices, if any, are on the channel - * by looking at the device 0/1 error register. Look at the signature - * stored in each device's taskfile registers, to determine if - * the device is ATA or ATAPI. - * - * LOCKING: - * PCI/etc. bus probe sem. - * Obtains host lock. - * - * SIDE EFFECTS: - * Sets ATA_FLAG_DISABLED if bus reset fails. - */ - -void ata_bus_reset(struct ata_port *ap) -{ - struct ata_device *device = ap->link.device; - struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; - u8 err; - unsigned int dev0, dev1 = 0, devmask = 0; - int rc; - - DPRINTK("ENTER, host %u, port %u\n", ap->print_id, ap->port_no); - - /* determine if device 0/1 are present */ - if (ap->flags & ATA_FLAG_SATA_RESET) - dev0 = 1; - else { - dev0 = ata_devchk(ap, 0); - if (slave_possible) - dev1 = ata_devchk(ap, 1); - } - - if (dev0) - devmask |= (1 << 0); - if (dev1) - devmask |= (1 << 1); - - /* select device 0 again */ - ap->ops->dev_select(ap, 0); - - /* issue bus reset */ - if (ap->flags & ATA_FLAG_SRST) { - rc = ata_bus_softreset(ap, devmask, jiffies + 40 * HZ); - if (rc && rc != -ENODEV) - goto err_out; - } - - /* - * determine by signature whether we have ATA or ATAPI devices - */ - device[0].class = ata_dev_try_classify(&device[0], dev0, &err); - if ((slave_possible) && (err != 0x81)) - device[1].class = ata_dev_try_classify(&device[1], dev1, &err); - - /* is double-select really necessary? */ - if (device[1].class != ATA_DEV_NONE) - ap->ops->dev_select(ap, 1); - if (device[0].class != ATA_DEV_NONE) - ap->ops->dev_select(ap, 0); - - /* if no devices were detected, disable this port */ - if ((device[0].class == ATA_DEV_NONE) && - (device[1].class == ATA_DEV_NONE)) - goto err_out; - - if (ap->flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST)) { - /* set up device control for ATA_FLAG_SATA_RESET */ - iowrite8(ap->ctl, ioaddr->ctl_addr); - } - - DPRINTK("EXIT\n"); - return; - -err_out: - ata_port_printk(ap, KERN_ERR, "disabling port\n"); - ata_port_disable(ap); - - DPRINTK("EXIT\n"); -} - /** * sata_link_debounce - debounce SATA phy status * @link: ATA link to debounce SATA phy status for @@ -4034,12 +3478,12 @@ int ata_std_prereset(struct ata_link *link, unsigned long deadline) } /** - * ata_std_softreset - reset host port via ATA SRST - * @link: ATA link to reset - * @classes: resulting classes of attached devices + * sata_link_hardreset - reset link via SATA phy reset + * @link: link to reset + * @timing: timing parameters { interval, duratinon, timeout } in msec * @deadline: deadline jiffies for the operation * - * Reset host port using ATA SRST. + * SATA phy-reset @link using DET bits of SControl register. * * LOCKING: * Kernel thread context (may sleep) @@ -4047,70 +3491,10 @@ int ata_std_prereset(struct ata_link *link, unsigned long deadline) * RETURNS: * 0 on success, -errno otherwise. */ -int ata_std_softreset(struct ata_link *link, unsigned int *classes, - unsigned long deadline) +int sata_link_hardreset(struct ata_link *link, const unsigned long *timing, + unsigned long deadline) { - struct ata_port *ap = link->ap; - unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; - unsigned int devmask = 0; - int rc; - u8 err; - - DPRINTK("ENTER\n"); - - if (ata_link_offline(link)) { - classes[0] = ATA_DEV_NONE; - goto out; - } - - /* determine if device 0/1 are present */ - if (ata_devchk(ap, 0)) - devmask |= (1 << 0); - if (slave_possible && ata_devchk(ap, 1)) - devmask |= (1 << 1); - - /* select device 0 again */ - ap->ops->dev_select(ap, 0); - - /* issue bus reset */ - DPRINTK("about to softreset, devmask=%x\n", devmask); - rc = ata_bus_softreset(ap, devmask, deadline); - /* if link is occupied, -ENODEV too is an error */ - if (rc && (rc != -ENODEV || sata_scr_valid(link))) { - ata_link_printk(link, KERN_ERR, "SRST failed (errno=%d)\n", rc); - return rc; - } - - /* determine by signature whether we have ATA or ATAPI devices */ - classes[0] = ata_dev_try_classify(&link->device[0], - devmask & (1 << 0), &err); - if (slave_possible && err != 0x81) - classes[1] = ata_dev_try_classify(&link->device[1], - devmask & (1 << 1), &err); - - out: - DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]); - return 0; -} - -/** - * sata_link_hardreset - reset link via SATA phy reset - * @link: link to reset - * @timing: timing parameters { interval, duratinon, timeout } in msec - * @deadline: deadline jiffies for the operation - * - * SATA phy-reset @link using DET bits of SControl register. - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * 0 on success, -errno otherwise. - */ -int sata_link_hardreset(struct ata_link *link, const unsigned long *timing, - unsigned long deadline) -{ - u32 scontrol; + u32 scontrol; int rc; DPRINTK("ENTER\n"); @@ -4153,74 +3537,6 @@ int sata_link_hardreset(struct ata_link *link, const unsigned long *timing, return rc; } -/** - * sata_std_hardreset - reset host port via SATA phy reset - * @link: link to reset - * @class: resulting class of attached device - * @deadline: deadline jiffies for the operation - * - * SATA phy-reset host port using DET bits of SControl register, - * wait for !BSY and classify the attached device. - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * 0 on success, -errno otherwise. - */ -int sata_std_hardreset(struct ata_link *link, unsigned int *class, - unsigned long deadline) -{ - struct ata_port *ap = link->ap; - const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); - int rc; - - DPRINTK("ENTER\n"); - - /* do hardreset */ - rc = sata_link_hardreset(link, timing, deadline); - if (rc) { - ata_link_printk(link, KERN_ERR, - "COMRESET failed (errno=%d)\n", rc); - return rc; - } - - /* TODO: phy layer with polling, timeouts, etc. */ - if (ata_link_offline(link)) { - *class = ATA_DEV_NONE; - DPRINTK("EXIT, link offline\n"); - return 0; - } - - /* wait a while before checking status */ - ata_wait_after_reset(ap, deadline); - - /* If PMP is supported, we have to do follow-up SRST. Note - * that some PMPs don't send D2H Reg FIS after hardreset at - * all if the first port is empty. Wait for it just for a - * second and request follow-up SRST. - */ - if (ap->flags & ATA_FLAG_PMP) { - ata_wait_ready(ap, jiffies + HZ); - return -EAGAIN; - } - - rc = ata_wait_ready(ap, deadline); - /* link occupied, -ENODEV too is an error */ - if (rc) { - ata_link_printk(link, KERN_ERR, - "COMRESET failed (errno=%d)\n", rc); - return rc; - } - - ap->ops->dev_select(ap, 0); /* probably unnecessary */ - - *class = ata_dev_try_classify(link->device, 1, NULL); - - DPRINTK("EXIT, class=%u\n", *class); - return 0; -} - /** * ata_std_postreset - standard postreset callback * @link: the target ata_link @@ -4803,112 +4119,6 @@ void ata_sg_clean(struct ata_queued_cmd *qc) qc->sg = NULL; } -/** - * ata_fill_sg - Fill PCI IDE PRD table - * @qc: Metadata associated with taskfile to be transferred - * - * Fill PCI IDE PRD (scatter-gather) table with segments - * associated with the current disk command. - * - * LOCKING: - * spin_lock_irqsave(host lock) - * - */ -static void ata_fill_sg(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct scatterlist *sg; - unsigned int si, pi; - - pi = 0; - for_each_sg(qc->sg, sg, qc->n_elem, si) { - u32 addr, offset; - u32 sg_len, len; - - /* determine if physical DMA addr spans 64K boundary. - * Note h/w doesn't support 64-bit, so we unconditionally - * truncate dma_addr_t to u32. - */ - addr = (u32) sg_dma_address(sg); - sg_len = sg_dma_len(sg); - - while (sg_len) { - offset = addr & 0xffff; - len = sg_len; - if ((offset + sg_len) > 0x10000) - len = 0x10000 - offset; - - ap->prd[pi].addr = cpu_to_le32(addr); - ap->prd[pi].flags_len = cpu_to_le32(len & 0xffff); - VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len); - - pi++; - sg_len -= len; - addr += len; - } - } - - ap->prd[pi - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); -} - -/** - * ata_fill_sg_dumb - Fill PCI IDE PRD table - * @qc: Metadata associated with taskfile to be transferred - * - * Fill PCI IDE PRD (scatter-gather) table with segments - * associated with the current disk command. Perform the fill - * so that we avoid writing any length 64K records for - * controllers that don't follow the spec. - * - * LOCKING: - * spin_lock_irqsave(host lock) - * - */ -static void ata_fill_sg_dumb(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct scatterlist *sg; - unsigned int si, pi; - - pi = 0; - for_each_sg(qc->sg, sg, qc->n_elem, si) { - u32 addr, offset; - u32 sg_len, len, blen; - - /* determine if physical DMA addr spans 64K boundary. - * Note h/w doesn't support 64-bit, so we unconditionally - * truncate dma_addr_t to u32. - */ - addr = (u32) sg_dma_address(sg); - sg_len = sg_dma_len(sg); - - while (sg_len) { - offset = addr & 0xffff; - len = sg_len; - if ((offset + sg_len) > 0x10000) - len = 0x10000 - offset; - - blen = len & 0xffff; - ap->prd[pi].addr = cpu_to_le32(addr); - if (blen == 0) { - /* Some PATA chipsets like the CS5530 can't - cope with 0x0000 meaning 64K as the spec says */ - ap->prd[pi].flags_len = cpu_to_le32(0x8000); - blen = 0x8000; - ap->prd[++pi].addr = cpu_to_le32(addr + 0x8000); - } - ap->prd[pi].flags_len = cpu_to_le32(blen); - VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len); - - pi++; - sg_len -= len; - addr += len; - } - } - - ap->prd[pi - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); -} - /** * ata_check_atapi_dma - Check whether ATAPI DMA can be supported * @qc: Metadata associated with taskfile to check @@ -4918,858 +4128,132 @@ static void ata_fill_sg_dumb(struct ata_queued_cmd *qc) * supplied PACKET command. * * LOCKING: - * spin_lock_irqsave(host lock) - * - * RETURNS: 0 when ATAPI DMA can be used - * nonzero otherwise - */ -int ata_check_atapi_dma(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - - /* Don't allow DMA if it isn't multiple of 16 bytes. Quite a - * few ATAPI devices choke on such DMA requests. - */ - if (unlikely(qc->nbytes & 15)) - return 1; - - if (ap->ops->check_atapi_dma) - return ap->ops->check_atapi_dma(qc); - - return 0; -} - -/** - * ata_std_qc_defer - Check whether a qc needs to be deferred - * @qc: ATA command in question - * - * Non-NCQ commands cannot run with any other command, NCQ or - * not. As upper layer only knows the queue depth, we are - * responsible for maintaining exclusion. This function checks - * whether a new command @qc can be issued. - * - * LOCKING: - * spin_lock_irqsave(host lock) - * - * RETURNS: - * ATA_DEFER_* if deferring is needed, 0 otherwise. - */ -int ata_std_qc_defer(struct ata_queued_cmd *qc) -{ - struct ata_link *link = qc->dev->link; - - if (qc->tf.protocol == ATA_PROT_NCQ) { - if (!ata_tag_valid(link->active_tag)) - return 0; - } else { - if (!ata_tag_valid(link->active_tag) && !link->sactive) - return 0; - } - - return ATA_DEFER_LINK; -} - -/** - * ata_qc_prep - Prepare taskfile for submission - * @qc: Metadata associated with taskfile to be prepared - * - * Prepare ATA taskfile for submission. - * - * LOCKING: - * spin_lock_irqsave(host lock) - */ -void ata_qc_prep(struct ata_queued_cmd *qc) -{ - if (!(qc->flags & ATA_QCFLAG_DMAMAP)) - return; - - ata_fill_sg(qc); -} - -/** - * ata_dumb_qc_prep - Prepare taskfile for submission - * @qc: Metadata associated with taskfile to be prepared - * - * Prepare ATA taskfile for submission. - * - * LOCKING: - * spin_lock_irqsave(host lock) - */ -void ata_dumb_qc_prep(struct ata_queued_cmd *qc) -{ - if (!(qc->flags & ATA_QCFLAG_DMAMAP)) - return; - - ata_fill_sg_dumb(qc); -} - -void ata_noop_qc_prep(struct ata_queued_cmd *qc) { } - -/** - * ata_sg_init - Associate command with scatter-gather table. - * @qc: Command to be associated - * @sg: Scatter-gather table. - * @n_elem: Number of elements in s/g table. - * - * Initialize the data-related elements of queued_cmd @qc - * to point to a scatter-gather table @sg, containing @n_elem - * elements. - * - * LOCKING: - * spin_lock_irqsave(host lock) - */ -void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, - unsigned int n_elem) -{ - qc->sg = sg; - qc->n_elem = n_elem; - qc->cursg = qc->sg; -} - -/** - * ata_sg_setup - DMA-map the scatter-gather table associated with a command. - * @qc: Command with scatter-gather table to be mapped. - * - * DMA-map the scatter-gather table associated with queued_cmd @qc. - * - * LOCKING: - * spin_lock_irqsave(host lock) - * - * RETURNS: - * Zero on success, negative on error. - * - */ -static int ata_sg_setup(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - unsigned int n_elem; - - VPRINTK("ENTER, ata%u\n", ap->print_id); - - n_elem = dma_map_sg(ap->dev, qc->sg, qc->n_elem, qc->dma_dir); - if (n_elem < 1) - return -1; - - DPRINTK("%d sg elements mapped\n", n_elem); - - qc->n_elem = n_elem; - qc->flags |= ATA_QCFLAG_DMAMAP; - - return 0; -} - -/** - * swap_buf_le16 - swap halves of 16-bit words in place - * @buf: Buffer to swap - * @buf_words: Number of 16-bit words in buffer. - * - * Swap halves of 16-bit words if needed to convert from - * little-endian byte order to native cpu byte order, or - * vice-versa. - * - * LOCKING: - * Inherited from caller. - */ -void swap_buf_le16(u16 *buf, unsigned int buf_words) -{ -#ifdef __BIG_ENDIAN - unsigned int i; - - for (i = 0; i < buf_words; i++) - buf[i] = le16_to_cpu(buf[i]); -#endif /* __BIG_ENDIAN */ -} - -/** - * ata_data_xfer - Transfer data by PIO - * @dev: device to target - * @buf: data buffer - * @buflen: buffer length - * @rw: read/write - * - * Transfer data from/to the device data register by PIO. - * - * LOCKING: - * Inherited from caller. - * - * RETURNS: - * Bytes consumed. - */ -unsigned int ata_data_xfer(struct ata_device *dev, unsigned char *buf, - unsigned int buflen, int rw) -{ - struct ata_port *ap = dev->link->ap; - void __iomem *data_addr = ap->ioaddr.data_addr; - unsigned int words = buflen >> 1; - - /* Transfer multiple of 2 bytes */ - if (rw == READ) - ioread16_rep(data_addr, buf, words); - else - iowrite16_rep(data_addr, buf, words); - - /* Transfer trailing 1 byte, if any. */ - if (unlikely(buflen & 0x01)) { - __le16 align_buf[1] = { 0 }; - unsigned char *trailing_buf = buf + buflen - 1; - - if (rw == READ) { - align_buf[0] = cpu_to_le16(ioread16(data_addr)); - memcpy(trailing_buf, align_buf, 1); - } else { - memcpy(align_buf, trailing_buf, 1); - iowrite16(le16_to_cpu(align_buf[0]), data_addr); - } - words++; - } - - return words << 1; -} - -/** - * ata_data_xfer_noirq - Transfer data by PIO - * @dev: device to target - * @buf: data buffer - * @buflen: buffer length - * @rw: read/write - * - * Transfer data from/to the device data register by PIO. Do the - * transfer with interrupts disabled. - * - * LOCKING: - * Inherited from caller. - * - * RETURNS: - * Bytes consumed. - */ -unsigned int ata_data_xfer_noirq(struct ata_device *dev, unsigned char *buf, - unsigned int buflen, int rw) -{ - unsigned long flags; - unsigned int consumed; - - local_irq_save(flags); - consumed = ata_data_xfer(dev, buf, buflen, rw); - local_irq_restore(flags); - - return consumed; -} - - -/** - * ata_pio_sector - Transfer a sector of data. - * @qc: Command on going - * - * Transfer qc->sect_size bytes of data from/to the ATA device. - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_pio_sector(struct ata_queued_cmd *qc) -{ - int do_write = (qc->tf.flags & ATA_TFLAG_WRITE); - struct ata_port *ap = qc->ap; - struct page *page; - unsigned int offset; - unsigned char *buf; - - if (qc->curbytes == qc->nbytes - qc->sect_size) - ap->hsm_task_state = HSM_ST_LAST; - - page = sg_page(qc->cursg); - offset = qc->cursg->offset + qc->cursg_ofs; - - /* get the current page and offset */ - page = nth_page(page, (offset >> PAGE_SHIFT)); - offset %= PAGE_SIZE; - - DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); - - if (PageHighMem(page)) { - unsigned long flags; - - /* FIXME: use a bounce buffer */ - local_irq_save(flags); - buf = kmap_atomic(page, KM_IRQ0); - - /* do the actual data transfer */ - ap->ops->data_xfer(qc->dev, buf + offset, qc->sect_size, do_write); - - kunmap_atomic(buf, KM_IRQ0); - local_irq_restore(flags); - } else { - buf = page_address(page); - ap->ops->data_xfer(qc->dev, buf + offset, qc->sect_size, do_write); - } - - qc->curbytes += qc->sect_size; - qc->cursg_ofs += qc->sect_size; - - if (qc->cursg_ofs == qc->cursg->length) { - qc->cursg = sg_next(qc->cursg); - qc->cursg_ofs = 0; - } -} - -/** - * ata_pio_sectors - Transfer one or many sectors. - * @qc: Command on going - * - * Transfer one or many sectors of data from/to the - * ATA device for the DRQ request. - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_pio_sectors(struct ata_queued_cmd *qc) -{ - if (is_multi_taskfile(&qc->tf)) { - /* READ/WRITE MULTIPLE */ - unsigned int nsect; - - WARN_ON(qc->dev->multi_count == 0); - - nsect = min((qc->nbytes - qc->curbytes) / qc->sect_size, - qc->dev->multi_count); - while (nsect--) - ata_pio_sector(qc); - } else - ata_pio_sector(qc); - - ata_altstatus(qc->ap); /* flush */ -} - -/** - * atapi_send_cdb - Write CDB bytes to hardware - * @ap: Port to which ATAPI device is attached. - * @qc: Taskfile currently active - * - * When device has indicated its readiness to accept - * a CDB, this function is called. Send the CDB. - * - * LOCKING: - * caller. - */ - -static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc) -{ - /* send SCSI cdb */ - DPRINTK("send cdb\n"); - WARN_ON(qc->dev->cdb_len < 12); - - ap->ops->data_xfer(qc->dev, qc->cdb, qc->dev->cdb_len, 1); - ata_altstatus(ap); /* flush */ - - switch (qc->tf.protocol) { - case ATAPI_PROT_PIO: - ap->hsm_task_state = HSM_ST; - break; - case ATAPI_PROT_NODATA: - ap->hsm_task_state = HSM_ST_LAST; - break; - case ATAPI_PROT_DMA: - ap->hsm_task_state = HSM_ST_LAST; - /* initiate bmdma */ - ap->ops->bmdma_start(qc); - break; - } -} - -/** - * __atapi_pio_bytes - Transfer data from/to the ATAPI device. - * @qc: Command on going - * @bytes: number of bytes - * - * Transfer Transfer data from/to the ATAPI device. - * - * LOCKING: - * Inherited from caller. - * - */ -static int __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) -{ - int rw = (qc->tf.flags & ATA_TFLAG_WRITE) ? WRITE : READ; - struct ata_port *ap = qc->ap; - struct ata_device *dev = qc->dev; - struct ata_eh_info *ehi = &dev->link->eh_info; - struct scatterlist *sg; - struct page *page; - unsigned char *buf; - unsigned int offset, count, consumed; - -next_sg: - sg = qc->cursg; - if (unlikely(!sg)) { - ata_ehi_push_desc(ehi, "unexpected or too much trailing data " - "buf=%u cur=%u bytes=%u", - qc->nbytes, qc->curbytes, bytes); - return -1; - } - - page = sg_page(sg); - offset = sg->offset + qc->cursg_ofs; - - /* get the current page and offset */ - page = nth_page(page, (offset >> PAGE_SHIFT)); - offset %= PAGE_SIZE; - - /* don't overrun current sg */ - count = min(sg->length - qc->cursg_ofs, bytes); - - /* don't cross page boundaries */ - count = min(count, (unsigned int)PAGE_SIZE - offset); - - DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); - - if (PageHighMem(page)) { - unsigned long flags; - - /* FIXME: use bounce buffer */ - local_irq_save(flags); - buf = kmap_atomic(page, KM_IRQ0); - - /* do the actual data transfer */ - consumed = ap->ops->data_xfer(dev, buf + offset, count, rw); - - kunmap_atomic(buf, KM_IRQ0); - local_irq_restore(flags); - } else { - buf = page_address(page); - consumed = ap->ops->data_xfer(dev, buf + offset, count, rw); - } - - bytes -= min(bytes, consumed); - qc->curbytes += count; - qc->cursg_ofs += count; - - if (qc->cursg_ofs == sg->length) { - qc->cursg = sg_next(qc->cursg); - qc->cursg_ofs = 0; - } - - /* consumed can be larger than count only for the last transfer */ - WARN_ON(qc->cursg && count != consumed); - - if (bytes) - goto next_sg; - return 0; -} - -/** - * atapi_pio_bytes - Transfer data from/to the ATAPI device. - * @qc: Command on going - * - * Transfer Transfer data from/to the ATAPI device. - * - * LOCKING: - * Inherited from caller. - */ - -static void atapi_pio_bytes(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct ata_device *dev = qc->dev; - struct ata_eh_info *ehi = &dev->link->eh_info; - unsigned int ireason, bc_lo, bc_hi, bytes; - int i_write, do_write = (qc->tf.flags & ATA_TFLAG_WRITE) ? 1 : 0; - - /* Abuse qc->result_tf for temp storage of intermediate TF - * here to save some kernel stack usage. - * For normal completion, qc->result_tf is not relevant. For - * error, qc->result_tf is later overwritten by ata_qc_complete(). - * So, the correctness of qc->result_tf is not affected. - */ - ap->ops->tf_read(ap, &qc->result_tf); - ireason = qc->result_tf.nsect; - bc_lo = qc->result_tf.lbam; - bc_hi = qc->result_tf.lbah; - bytes = (bc_hi << 8) | bc_lo; - - /* shall be cleared to zero, indicating xfer of data */ - if (unlikely(ireason & (1 << 0))) - goto atapi_check; - - /* make sure transfer direction matches expected */ - i_write = ((ireason & (1 << 1)) == 0) ? 1 : 0; - if (unlikely(do_write != i_write)) - goto atapi_check; - - if (unlikely(!bytes)) - goto atapi_check; - - VPRINTK("ata%u: xfering %d bytes\n", ap->print_id, bytes); - - if (unlikely(__atapi_pio_bytes(qc, bytes))) - goto err_out; - ata_altstatus(ap); /* flush */ - - return; - - atapi_check: - ata_ehi_push_desc(ehi, "ATAPI check failed (ireason=0x%x bytes=%u)", - ireason, bytes); - err_out: - qc->err_mask |= AC_ERR_HSM; - ap->hsm_task_state = HSM_ST_ERR; -} - -/** - * ata_hsm_ok_in_wq - Check if the qc can be handled in the workqueue. - * @ap: the target ata_port - * @qc: qc on going - * - * RETURNS: - * 1 if ok in workqueue, 0 otherwise. - */ - -static inline int ata_hsm_ok_in_wq(struct ata_port *ap, struct ata_queued_cmd *qc) -{ - if (qc->tf.flags & ATA_TFLAG_POLLING) - return 1; - - if (ap->hsm_task_state == HSM_ST_FIRST) { - if (qc->tf.protocol == ATA_PROT_PIO && - (qc->tf.flags & ATA_TFLAG_WRITE)) - return 1; - - if (ata_is_atapi(qc->tf.protocol) && - !(qc->dev->flags & ATA_DFLAG_CDB_INTR)) - return 1; - } - - return 0; -} - -/** - * ata_hsm_qc_complete - finish a qc running on standard HSM - * @qc: Command to complete - * @in_wq: 1 if called from workqueue, 0 otherwise - * - * Finish @qc which is running on standard HSM. - * - * LOCKING: - * If @in_wq is zero, spin_lock_irqsave(host lock). - * Otherwise, none on entry and grabs host lock. - */ -static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq) -{ - struct ata_port *ap = qc->ap; - unsigned long flags; - - if (ap->ops->error_handler) { - if (in_wq) { - spin_lock_irqsave(ap->lock, flags); - - /* EH might have kicked in while host lock is - * released. - */ - qc = ata_qc_from_tag(ap, qc->tag); - if (qc) { - if (likely(!(qc->err_mask & AC_ERR_HSM))) { - ap->ops->irq_on(ap); - ata_qc_complete(qc); - } else - ata_port_freeze(ap); - } - - spin_unlock_irqrestore(ap->lock, flags); - } else { - if (likely(!(qc->err_mask & AC_ERR_HSM))) - ata_qc_complete(qc); - else - ata_port_freeze(ap); - } - } else { - if (in_wq) { - spin_lock_irqsave(ap->lock, flags); - ap->ops->irq_on(ap); - ata_qc_complete(qc); - spin_unlock_irqrestore(ap->lock, flags); - } else - ata_qc_complete(qc); - } -} - -/** - * ata_hsm_move - move the HSM to the next state. - * @ap: the target ata_port - * @qc: qc on going - * @status: current device status - * @in_wq: 1 if called from workqueue, 0 otherwise - * - * RETURNS: - * 1 when poll next status needed, 0 otherwise. - */ -int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, - u8 status, int in_wq) -{ - unsigned long flags = 0; - int poll_next; - - WARN_ON((qc->flags & ATA_QCFLAG_ACTIVE) == 0); - - /* Make sure ata_qc_issue_prot() does not throw things - * like DMA polling into the workqueue. Notice that - * in_wq is not equivalent to (qc->tf.flags & ATA_TFLAG_POLLING). - */ - WARN_ON(in_wq != ata_hsm_ok_in_wq(ap, qc)); - -fsm_start: - DPRINTK("ata%u: protocol %d task_state %d (dev_stat 0x%X)\n", - ap->print_id, qc->tf.protocol, ap->hsm_task_state, status); - - switch (ap->hsm_task_state) { - case HSM_ST_FIRST: - /* Send first data block or PACKET CDB */ - - /* If polling, we will stay in the work queue after - * sending the data. Otherwise, interrupt handler - * takes over after sending the data. - */ - poll_next = (qc->tf.flags & ATA_TFLAG_POLLING); - - /* check device status */ - if (unlikely((status & ATA_DRQ) == 0)) { - /* handle BSY=0, DRQ=0 as error */ - if (likely(status & (ATA_ERR | ATA_DF))) - /* device stops HSM for abort/error */ - qc->err_mask |= AC_ERR_DEV; - else - /* HSM violation. Let EH handle this */ - qc->err_mask |= AC_ERR_HSM; - - ap->hsm_task_state = HSM_ST_ERR; - goto fsm_start; - } - - /* Device should not ask for data transfer (DRQ=1) - * when it finds something wrong. - * We ignore DRQ here and stop the HSM by - * changing hsm_task_state to HSM_ST_ERR and - * let the EH abort the command or reset the device. - */ - if (unlikely(status & (ATA_ERR | ATA_DF))) { - /* Some ATAPI tape drives forget to clear the ERR bit - * when doing the next command (mostly request sense). - * We ignore ERR here to workaround and proceed sending - * the CDB. - */ - if (!(qc->dev->horkage & ATA_HORKAGE_STUCK_ERR)) { - ata_port_printk(ap, KERN_WARNING, - "DRQ=1 with device error, " - "dev_stat 0x%X\n", status); - qc->err_mask |= AC_ERR_HSM; - ap->hsm_task_state = HSM_ST_ERR; - goto fsm_start; - } - } - - /* Send the CDB (atapi) or the first data block (ata pio out). - * During the state transition, interrupt handler shouldn't - * be invoked before the data transfer is complete and - * hsm_task_state is changed. Hence, the following locking. - */ - if (in_wq) - spin_lock_irqsave(ap->lock, flags); - - if (qc->tf.protocol == ATA_PROT_PIO) { - /* PIO data out protocol. - * send first data block. - */ - - /* ata_pio_sectors() might change the state - * to HSM_ST_LAST. so, the state is changed here - * before ata_pio_sectors(). - */ - ap->hsm_task_state = HSM_ST; - ata_pio_sectors(qc); - } else - /* send CDB */ - atapi_send_cdb(ap, qc); - - if (in_wq) - spin_unlock_irqrestore(ap->lock, flags); - - /* if polling, ata_pio_task() handles the rest. - * otherwise, interrupt handler takes over from here. - */ - break; - - case HSM_ST: - /* complete command or read/write the data register */ - if (qc->tf.protocol == ATAPI_PROT_PIO) { - /* ATAPI PIO protocol */ - if ((status & ATA_DRQ) == 0) { - /* No more data to transfer or device error. - * Device error will be tagged in HSM_ST_LAST. - */ - ap->hsm_task_state = HSM_ST_LAST; - goto fsm_start; - } - - /* Device should not ask for data transfer (DRQ=1) - * when it finds something wrong. - * We ignore DRQ here and stop the HSM by - * changing hsm_task_state to HSM_ST_ERR and - * let the EH abort the command or reset the device. - */ - if (unlikely(status & (ATA_ERR | ATA_DF))) { - ata_port_printk(ap, KERN_WARNING, "DRQ=1 with " - "device error, dev_stat 0x%X\n", - status); - qc->err_mask |= AC_ERR_HSM; - ap->hsm_task_state = HSM_ST_ERR; - goto fsm_start; - } - - atapi_pio_bytes(qc); - - if (unlikely(ap->hsm_task_state == HSM_ST_ERR)) - /* bad ireason reported by device */ - goto fsm_start; - - } else { - /* ATA PIO protocol */ - if (unlikely((status & ATA_DRQ) == 0)) { - /* handle BSY=0, DRQ=0 as error */ - if (likely(status & (ATA_ERR | ATA_DF))) - /* device stops HSM for abort/error */ - qc->err_mask |= AC_ERR_DEV; - else - /* HSM violation. Let EH handle this. - * Phantom devices also trigger this - * condition. Mark hint. - */ - qc->err_mask |= AC_ERR_HSM | - AC_ERR_NODEV_HINT; - - ap->hsm_task_state = HSM_ST_ERR; - goto fsm_start; - } - - /* For PIO reads, some devices may ask for - * data transfer (DRQ=1) alone with ERR=1. - * We respect DRQ here and transfer one - * block of junk data before changing the - * hsm_task_state to HSM_ST_ERR. - * - * For PIO writes, ERR=1 DRQ=1 doesn't make - * sense since the data block has been - * transferred to the device. - */ - if (unlikely(status & (ATA_ERR | ATA_DF))) { - /* data might be corrputed */ - qc->err_mask |= AC_ERR_DEV; - - if (!(qc->tf.flags & ATA_TFLAG_WRITE)) { - ata_pio_sectors(qc); - status = ata_wait_idle(ap); - } - - if (status & (ATA_BUSY | ATA_DRQ)) - qc->err_mask |= AC_ERR_HSM; - - /* ata_pio_sectors() might change the - * state to HSM_ST_LAST. so, the state - * is changed after ata_pio_sectors(). - */ - ap->hsm_task_state = HSM_ST_ERR; - goto fsm_start; - } + * spin_lock_irqsave(host lock) + * + * RETURNS: 0 when ATAPI DMA can be used + * nonzero otherwise + */ +int ata_check_atapi_dma(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; - ata_pio_sectors(qc); + /* Don't allow DMA if it isn't multiple of 16 bytes. Quite a + * few ATAPI devices choke on such DMA requests. + */ + if (unlikely(qc->nbytes & 15)) + return 1; - if (ap->hsm_task_state == HSM_ST_LAST && - (!(qc->tf.flags & ATA_TFLAG_WRITE))) { - /* all data read */ - status = ata_wait_idle(ap); - goto fsm_start; - } - } + if (ap->ops->check_atapi_dma) + return ap->ops->check_atapi_dma(qc); - poll_next = 1; - break; + return 0; +} - case HSM_ST_LAST: - if (unlikely(!ata_ok(status))) { - qc->err_mask |= __ac_err_mask(status); - ap->hsm_task_state = HSM_ST_ERR; - goto fsm_start; - } +/** + * ata_std_qc_defer - Check whether a qc needs to be deferred + * @qc: ATA command in question + * + * Non-NCQ commands cannot run with any other command, NCQ or + * not. As upper layer only knows the queue depth, we are + * responsible for maintaining exclusion. This function checks + * whether a new command @qc can be issued. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: + * ATA_DEFER_* if deferring is needed, 0 otherwise. + */ +int ata_std_qc_defer(struct ata_queued_cmd *qc) +{ + struct ata_link *link = qc->dev->link; - /* no more data to transfer */ - DPRINTK("ata%u: dev %u command complete, drv_stat 0x%x\n", - ap->print_id, qc->dev->devno, status); + if (qc->tf.protocol == ATA_PROT_NCQ) { + if (!ata_tag_valid(link->active_tag)) + return 0; + } else { + if (!ata_tag_valid(link->active_tag) && !link->sactive) + return 0; + } - WARN_ON(qc->err_mask); + return ATA_DEFER_LINK; +} - ap->hsm_task_state = HSM_ST_IDLE; +void ata_noop_qc_prep(struct ata_queued_cmd *qc) { } - /* complete taskfile transaction */ - ata_hsm_qc_complete(qc, in_wq); +/** + * ata_sg_init - Associate command with scatter-gather table. + * @qc: Command to be associated + * @sg: Scatter-gather table. + * @n_elem: Number of elements in s/g table. + * + * Initialize the data-related elements of queued_cmd @qc + * to point to a scatter-gather table @sg, containing @n_elem + * elements. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, + unsigned int n_elem) +{ + qc->sg = sg; + qc->n_elem = n_elem; + qc->cursg = qc->sg; +} - poll_next = 0; - break; +/** + * ata_sg_setup - DMA-map the scatter-gather table associated with a command. + * @qc: Command with scatter-gather table to be mapped. + * + * DMA-map the scatter-gather table associated with queued_cmd @qc. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: + * Zero on success, negative on error. + * + */ +static int ata_sg_setup(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + unsigned int n_elem; - case HSM_ST_ERR: - /* make sure qc->err_mask is available to - * know what's wrong and recover - */ - WARN_ON(qc->err_mask == 0); + VPRINTK("ENTER, ata%u\n", ap->print_id); - ap->hsm_task_state = HSM_ST_IDLE; + n_elem = dma_map_sg(ap->dev, qc->sg, qc->n_elem, qc->dma_dir); + if (n_elem < 1) + return -1; - /* complete taskfile transaction */ - ata_hsm_qc_complete(qc, in_wq); + DPRINTK("%d sg elements mapped\n", n_elem); - poll_next = 0; - break; - default: - poll_next = 0; - BUG(); - } + qc->n_elem = n_elem; + qc->flags |= ATA_QCFLAG_DMAMAP; - return poll_next; + return 0; } -static void ata_pio_task(struct work_struct *work) +/** + * swap_buf_le16 - swap halves of 16-bit words in place + * @buf: Buffer to swap + * @buf_words: Number of 16-bit words in buffer. + * + * Swap halves of 16-bit words if needed to convert from + * little-endian byte order to native cpu byte order, or + * vice-versa. + * + * LOCKING: + * Inherited from caller. + */ +void swap_buf_le16(u16 *buf, unsigned int buf_words) { - struct ata_port *ap = - container_of(work, struct ata_port, port_task.work); - struct ata_queued_cmd *qc = ap->port_task_data; - u8 status; - int poll_next; - -fsm_start: - WARN_ON(ap->hsm_task_state == HSM_ST_IDLE); - - /* - * This is purely heuristic. This is a fast path. - * Sometimes when we enter, BSY will be cleared in - * a chk-status or two. If not, the drive is probably seeking - * or something. Snooze for a couple msecs, then - * chk-status again. If still busy, queue delayed work. - */ - status = ata_busy_wait(ap, ATA_BUSY, 5); - if (status & ATA_BUSY) { - msleep(2); - status = ata_busy_wait(ap, ATA_BUSY, 10); - if (status & ATA_BUSY) { - ata_pio_queue_task(ap, qc, ATA_SHORT_PAUSE); - return; - } - } - - /* move the HSM */ - poll_next = ata_hsm_move(ap, qc, status, 1); +#ifdef __BIG_ENDIAN + unsigned int i; - /* another command or interrupt handler - * may be running at this point. - */ - if (poll_next) - goto fsm_start; + for (i = 0; i < buf_words; i++) + buf[i] = le16_to_cpu(buf[i]); +#endif /* __BIG_ENDIAN */ } /** @@ -6121,285 +4605,6 @@ err: ata_qc_complete(qc); } -/** - * ata_qc_issue_prot - issue taskfile to device in proto-dependent manner - * @qc: command to issue to device - * - * Using various libata functions and hooks, this function - * starts an ATA command. ATA commands are grouped into - * classes called "protocols", and issuing each type of protocol - * is slightly different. - * - * May be used as the qc_issue() entry in ata_port_operations. - * - * LOCKING: - * spin_lock_irqsave(host lock) - * - * RETURNS: - * Zero on success, AC_ERR_* mask on failure - */ - -unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - - /* Use polling pio if the LLD doesn't handle - * interrupt driven pio and atapi CDB interrupt. - */ - if (ap->flags & ATA_FLAG_PIO_POLLING) { - switch (qc->tf.protocol) { - case ATA_PROT_PIO: - case ATA_PROT_NODATA: - case ATAPI_PROT_PIO: - case ATAPI_PROT_NODATA: - qc->tf.flags |= ATA_TFLAG_POLLING; - break; - case ATAPI_PROT_DMA: - if (qc->dev->flags & ATA_DFLAG_CDB_INTR) - /* see ata_dma_blacklisted() */ - BUG(); - break; - default: - break; - } - } - - /* select the device */ - ata_dev_select(ap, qc->dev->devno, 1, 0); - - /* start the command */ - switch (qc->tf.protocol) { - case ATA_PROT_NODATA: - if (qc->tf.flags & ATA_TFLAG_POLLING) - ata_qc_set_polling(qc); - - ata_tf_to_host(ap, &qc->tf); - ap->hsm_task_state = HSM_ST_LAST; - - if (qc->tf.flags & ATA_TFLAG_POLLING) - ata_pio_queue_task(ap, qc, 0); - - break; - - case ATA_PROT_DMA: - WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING); - - ap->ops->tf_load(ap, &qc->tf); /* load tf registers */ - ap->ops->bmdma_setup(qc); /* set up bmdma */ - ap->ops->bmdma_start(qc); /* initiate bmdma */ - ap->hsm_task_state = HSM_ST_LAST; - break; - - case ATA_PROT_PIO: - if (qc->tf.flags & ATA_TFLAG_POLLING) - ata_qc_set_polling(qc); - - ata_tf_to_host(ap, &qc->tf); - - if (qc->tf.flags & ATA_TFLAG_WRITE) { - /* PIO data out protocol */ - ap->hsm_task_state = HSM_ST_FIRST; - ata_pio_queue_task(ap, qc, 0); - - /* always send first data block using - * the ata_pio_task() codepath. - */ - } else { - /* PIO data in protocol */ - ap->hsm_task_state = HSM_ST; - - if (qc->tf.flags & ATA_TFLAG_POLLING) - ata_pio_queue_task(ap, qc, 0); - - /* if polling, ata_pio_task() handles the rest. - * otherwise, interrupt handler takes over from here. - */ - } - - break; - - case ATAPI_PROT_PIO: - case ATAPI_PROT_NODATA: - if (qc->tf.flags & ATA_TFLAG_POLLING) - ata_qc_set_polling(qc); - - ata_tf_to_host(ap, &qc->tf); - - ap->hsm_task_state = HSM_ST_FIRST; - - /* send cdb by polling if no cdb interrupt */ - if ((!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) || - (qc->tf.flags & ATA_TFLAG_POLLING)) - ata_pio_queue_task(ap, qc, 0); - break; - - case ATAPI_PROT_DMA: - WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING); - - ap->ops->tf_load(ap, &qc->tf); /* load tf registers */ - ap->ops->bmdma_setup(qc); /* set up bmdma */ - ap->hsm_task_state = HSM_ST_FIRST; - - /* send cdb by polling if no cdb interrupt */ - if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) - ata_pio_queue_task(ap, qc, 0); - break; - - default: - WARN_ON(1); - return AC_ERR_SYSTEM; - } - - return 0; -} - -/** - * ata_host_intr - Handle host interrupt for given (port, task) - * @ap: Port on which interrupt arrived (possibly...) - * @qc: Taskfile currently active in engine - * - * Handle host interrupt for given queued command. Currently, - * only DMA interrupts are handled. All other commands are - * handled via polling with interrupts disabled (nIEN bit). - * - * LOCKING: - * spin_lock_irqsave(host lock) - * - * RETURNS: - * One if interrupt was handled, zero if not (shared irq). - */ - -inline unsigned int ata_host_intr(struct ata_port *ap, - struct ata_queued_cmd *qc) -{ - struct ata_eh_info *ehi = &ap->link.eh_info; - u8 status, host_stat = 0; - - VPRINTK("ata%u: protocol %d task_state %d\n", - ap->print_id, qc->tf.protocol, ap->hsm_task_state); - - /* Check whether we are expecting interrupt in this state */ - switch (ap->hsm_task_state) { - case HSM_ST_FIRST: - /* Some pre-ATAPI-4 devices assert INTRQ - * at this state when ready to receive CDB. - */ - - /* Check the ATA_DFLAG_CDB_INTR flag is enough here. - * The flag was turned on only for atapi devices. No - * need to check ata_is_atapi(qc->tf.protocol) again. - */ - if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) - goto idle_irq; - break; - case HSM_ST_LAST: - if (qc->tf.protocol == ATA_PROT_DMA || - qc->tf.protocol == ATAPI_PROT_DMA) { - /* check status of DMA engine */ - host_stat = ap->ops->bmdma_status(ap); - VPRINTK("ata%u: host_stat 0x%X\n", - ap->print_id, host_stat); - - /* if it's not our irq... */ - if (!(host_stat & ATA_DMA_INTR)) - goto idle_irq; - - /* before we do anything else, clear DMA-Start bit */ - ap->ops->bmdma_stop(qc); - - if (unlikely(host_stat & ATA_DMA_ERR)) { - /* error when transfering data to/from memory */ - qc->err_mask |= AC_ERR_HOST_BUS; - ap->hsm_task_state = HSM_ST_ERR; - } - } - break; - case HSM_ST: - break; - default: - goto idle_irq; - } - - /* check altstatus */ - status = ata_altstatus(ap); - if (status & ATA_BUSY) - goto idle_irq; - - /* check main status, clearing INTRQ */ - status = ata_chk_status(ap); - if (unlikely(status & ATA_BUSY)) - goto idle_irq; - - /* ack bmdma irq events */ - ap->ops->irq_clear(ap); - - ata_hsm_move(ap, qc, status, 0); - - if (unlikely(qc->err_mask) && (qc->tf.protocol == ATA_PROT_DMA || - qc->tf.protocol == ATAPI_PROT_DMA)) - ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat); - - return 1; /* irq handled */ - -idle_irq: - ap->stats.idle_irq++; - -#ifdef ATA_IRQ_TRAP - if ((ap->stats.idle_irq % 1000) == 0) { - ata_chk_status(ap); - ap->ops->irq_clear(ap); - ata_port_printk(ap, KERN_WARNING, "irq trap\n"); - return 1; - } -#endif - return 0; /* irq not handled */ -} - -/** - * ata_interrupt - Default ATA host interrupt handler - * @irq: irq line (unused) - * @dev_instance: pointer to our ata_host information structure - * - * Default interrupt handler for PCI IDE devices. Calls - * ata_host_intr() for each port that is not disabled. - * - * LOCKING: - * Obtains host lock during operation. - * - * RETURNS: - * IRQ_NONE or IRQ_HANDLED. - */ - -irqreturn_t ata_interrupt(int irq, void *dev_instance) -{ - struct ata_host *host = dev_instance; - unsigned int i; - unsigned int handled = 0; - unsigned long flags; - - /* TODO: make _irqsave conditional on x86 PCI IDE legacy mode */ - spin_lock_irqsave(&host->lock, flags); - - for (i = 0; i < host->n_ports; i++) { - struct ata_port *ap; - - ap = host->ports[i]; - if (ap && - !(ap->flags & ATA_FLAG_DISABLED)) { - struct ata_queued_cmd *qc; - - qc = ata_qc_from_tag(ap, ap->link.active_tag); - if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) && - (qc->flags & ATA_QCFLAG_ACTIVE)) - handled |= ata_host_intr(ap, qc); - } - } - - spin_unlock_irqrestore(&host->lock, flags); - - return IRQ_RETVAL(handled); -} - /** * sata_scr_valid - test whether SCRs are accessible * @link: ATA link to test SCR accessibility for @@ -7432,33 +5637,6 @@ void ata_host_detach(struct ata_host *host) ata_acpi_dissociate(host); } -/** - * ata_std_ports - initialize ioaddr with standard port offsets. - * @ioaddr: IO address structure to be initialized - * - * Utility function which initializes data_addr, error_addr, - * feature_addr, nsect_addr, lbal_addr, lbam_addr, lbah_addr, - * device_addr, status_addr, and command_addr to standard offsets - * relative to cmd_addr. - * - * Does not set ctl_addr, altstatus_addr, bmdma_addr, or scr_addr. - */ - -void ata_std_ports(struct ata_ioports *ioaddr) -{ - ioaddr->data_addr = ioaddr->cmd_addr + ATA_REG_DATA; - ioaddr->error_addr = ioaddr->cmd_addr + ATA_REG_ERR; - ioaddr->feature_addr = ioaddr->cmd_addr + ATA_REG_FEATURE; - ioaddr->nsect_addr = ioaddr->cmd_addr + ATA_REG_NSECT; - ioaddr->lbal_addr = ioaddr->cmd_addr + ATA_REG_LBAL; - ioaddr->lbam_addr = ioaddr->cmd_addr + ATA_REG_LBAM; - ioaddr->lbah_addr = ioaddr->cmd_addr + ATA_REG_LBAH; - ioaddr->device_addr = ioaddr->cmd_addr + ATA_REG_DEVICE; - ioaddr->status_addr = ioaddr->cmd_addr + ATA_REG_STATUS; - ioaddr->command_addr = ioaddr->cmd_addr + ATA_REG_CMD; -} - - #ifdef CONFIG_PCI /** @@ -7890,12 +6068,9 @@ EXPORT_SYMBOL_GPL(sata_deb_timing_long); EXPORT_SYMBOL_GPL(ata_base_port_ops); EXPORT_SYMBOL_GPL(sata_port_ops); EXPORT_SYMBOL_GPL(sata_pmp_port_ops); -EXPORT_SYMBOL_GPL(ata_sff_port_ops); -EXPORT_SYMBOL_GPL(ata_bmdma_port_ops); EXPORT_SYMBOL_GPL(ata_dummy_port_ops); EXPORT_SYMBOL_GPL(ata_dummy_port_info); EXPORT_SYMBOL_GPL(ata_std_bios_param); -EXPORT_SYMBOL_GPL(ata_std_ports); EXPORT_SYMBOL_GPL(ata_host_init); EXPORT_SYMBOL_GPL(ata_host_alloc); EXPORT_SYMBOL_GPL(ata_host_alloc_pinfo); @@ -7904,14 +6079,9 @@ EXPORT_SYMBOL_GPL(ata_host_register); EXPORT_SYMBOL_GPL(ata_host_activate); EXPORT_SYMBOL_GPL(ata_host_detach); EXPORT_SYMBOL_GPL(ata_sg_init); -EXPORT_SYMBOL_GPL(ata_hsm_move); EXPORT_SYMBOL_GPL(ata_qc_complete); EXPORT_SYMBOL_GPL(ata_qc_complete_multiple); -EXPORT_SYMBOL_GPL(ata_qc_issue_prot); -EXPORT_SYMBOL_GPL(ata_tf_load); -EXPORT_SYMBOL_GPL(ata_tf_read); EXPORT_SYMBOL_GPL(ata_noop_dev_select); -EXPORT_SYMBOL_GPL(ata_std_dev_select); EXPORT_SYMBOL_GPL(sata_print_link_status); EXPORT_SYMBOL_GPL(atapi_cmd_type); EXPORT_SYMBOL_GPL(ata_tf_to_fis); @@ -7923,54 +6093,27 @@ EXPORT_SYMBOL_GPL(ata_xfer_mode2mask); EXPORT_SYMBOL_GPL(ata_xfer_mode2shift); EXPORT_SYMBOL_GPL(ata_mode_string); EXPORT_SYMBOL_GPL(ata_id_xfermask); -EXPORT_SYMBOL_GPL(ata_check_status); -EXPORT_SYMBOL_GPL(ata_altstatus); -EXPORT_SYMBOL_GPL(ata_exec_command); EXPORT_SYMBOL_GPL(ata_port_start); -EXPORT_SYMBOL_GPL(ata_sff_port_start); -EXPORT_SYMBOL_GPL(ata_interrupt); EXPORT_SYMBOL_GPL(ata_do_set_mode); -EXPORT_SYMBOL_GPL(ata_data_xfer); -EXPORT_SYMBOL_GPL(ata_data_xfer_noirq); EXPORT_SYMBOL_GPL(ata_std_qc_defer); -EXPORT_SYMBOL_GPL(ata_qc_prep); -EXPORT_SYMBOL_GPL(ata_dumb_qc_prep); EXPORT_SYMBOL_GPL(ata_noop_qc_prep); -EXPORT_SYMBOL_GPL(ata_bmdma_setup); -EXPORT_SYMBOL_GPL(ata_bmdma_start); -EXPORT_SYMBOL_GPL(ata_bmdma_irq_clear); EXPORT_SYMBOL_GPL(ata_noop_irq_clear); -EXPORT_SYMBOL_GPL(ata_bmdma_status); -EXPORT_SYMBOL_GPL(ata_bmdma_stop); -EXPORT_SYMBOL_GPL(ata_bmdma_freeze); -EXPORT_SYMBOL_GPL(ata_bmdma_thaw); -EXPORT_SYMBOL_GPL(ata_bmdma_error_handler); -EXPORT_SYMBOL_GPL(ata_bmdma_post_internal_cmd); EXPORT_SYMBOL_GPL(ata_port_probe); EXPORT_SYMBOL_GPL(ata_dev_disable); EXPORT_SYMBOL_GPL(sata_set_spd); EXPORT_SYMBOL_GPL(sata_link_debounce); EXPORT_SYMBOL_GPL(sata_link_resume); -EXPORT_SYMBOL_GPL(ata_bus_reset); -EXPORT_SYMBOL_GPL(ata_std_prereset); -EXPORT_SYMBOL_GPL(ata_std_softreset); EXPORT_SYMBOL_GPL(sata_link_hardreset); -EXPORT_SYMBOL_GPL(sata_std_hardreset); -EXPORT_SYMBOL_GPL(ata_std_postreset); EXPORT_SYMBOL_GPL(ata_dev_classify); EXPORT_SYMBOL_GPL(ata_dev_pair); EXPORT_SYMBOL_GPL(ata_port_disable); EXPORT_SYMBOL_GPL(ata_ratelimit); EXPORT_SYMBOL_GPL(ata_wait_register); -EXPORT_SYMBOL_GPL(ata_busy_sleep); -EXPORT_SYMBOL_GPL(ata_wait_after_reset); -EXPORT_SYMBOL_GPL(ata_wait_ready); EXPORT_SYMBOL_GPL(ata_scsi_ioctl); EXPORT_SYMBOL_GPL(ata_scsi_queuecmd); EXPORT_SYMBOL_GPL(ata_scsi_slave_config); EXPORT_SYMBOL_GPL(ata_scsi_slave_destroy); EXPORT_SYMBOL_GPL(ata_scsi_change_queue_depth); -EXPORT_SYMBOL_GPL(ata_host_intr); EXPORT_SYMBOL_GPL(sata_scr_valid); EXPORT_SYMBOL_GPL(sata_scr_read); EXPORT_SYMBOL_GPL(sata_scr_write); @@ -7993,11 +6136,6 @@ EXPORT_SYMBOL_GPL(ata_timing_cycle2mode); #ifdef CONFIG_PCI EXPORT_SYMBOL_GPL(pci_test_config_bits); -EXPORT_SYMBOL_GPL(ata_pci_init_sff_host); -EXPORT_SYMBOL_GPL(ata_pci_init_bmdma); -EXPORT_SYMBOL_GPL(ata_pci_prepare_sff_host); -EXPORT_SYMBOL_GPL(ata_pci_activate_sff_host); -EXPORT_SYMBOL_GPL(ata_pci_init_one); EXPORT_SYMBOL_GPL(ata_pci_remove_one); #ifdef CONFIG_PM EXPORT_SYMBOL_GPL(ata_pci_device_do_suspend); @@ -8005,8 +6143,6 @@ EXPORT_SYMBOL_GPL(ata_pci_device_do_resume); EXPORT_SYMBOL_GPL(ata_pci_device_suspend); EXPORT_SYMBOL_GPL(ata_pci_device_resume); #endif /* CONFIG_PM */ -EXPORT_SYMBOL_GPL(ata_pci_default_filter); -EXPORT_SYMBOL_GPL(ata_pci_clear_simplex); #endif /* CONFIG_PCI */ EXPORT_SYMBOL_GPL(sata_pmp_qc_defer_cmd_switch); @@ -8033,8 +6169,6 @@ EXPORT_SYMBOL_GPL(ata_eh_qc_complete); EXPORT_SYMBOL_GPL(ata_eh_qc_retry); EXPORT_SYMBOL_GPL(ata_do_eh); EXPORT_SYMBOL_GPL(ata_std_error_handler); -EXPORT_SYMBOL_GPL(ata_irq_on); -EXPORT_SYMBOL_GPL(ata_dev_try_classify); EXPORT_SYMBOL_GPL(ata_cable_40wire); EXPORT_SYMBOL_GPL(ata_cable_80wire); diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 40645ed125b..840ae6da59b 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -35,9 +35,185 @@ #include #include #include +#include #include "libata.h" +const struct ata_port_operations ata_sff_port_ops = { + .inherits = &ata_base_port_ops, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .softreset = ata_std_softreset, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .dev_select = ata_std_dev_select, + .check_status = ata_check_status, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .exec_command = ata_exec_command, + .data_xfer = ata_data_xfer, + .irq_on = ata_irq_on, + + .port_start = ata_sff_port_start, +}; + +const struct ata_port_operations ata_bmdma_port_ops = { + .inherits = &ata_sff_port_ops, + + .mode_filter = ata_pci_default_filter, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .irq_clear = ata_bmdma_irq_clear, +}; + +/** + * ata_fill_sg - Fill PCI IDE PRD table + * @qc: Metadata associated with taskfile to be transferred + * + * Fill PCI IDE PRD (scatter-gather) table with segments + * associated with the current disk command. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + */ +static void ata_fill_sg(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct scatterlist *sg; + unsigned int si, pi; + + pi = 0; + for_each_sg(qc->sg, sg, qc->n_elem, si) { + u32 addr, offset; + u32 sg_len, len; + + /* determine if physical DMA addr spans 64K boundary. + * Note h/w doesn't support 64-bit, so we unconditionally + * truncate dma_addr_t to u32. + */ + addr = (u32) sg_dma_address(sg); + sg_len = sg_dma_len(sg); + + while (sg_len) { + offset = addr & 0xffff; + len = sg_len; + if ((offset + sg_len) > 0x10000) + len = 0x10000 - offset; + + ap->prd[pi].addr = cpu_to_le32(addr); + ap->prd[pi].flags_len = cpu_to_le32(len & 0xffff); + VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len); + + pi++; + sg_len -= len; + addr += len; + } + } + + ap->prd[pi - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); +} + +/** + * ata_fill_sg_dumb - Fill PCI IDE PRD table + * @qc: Metadata associated with taskfile to be transferred + * + * Fill PCI IDE PRD (scatter-gather) table with segments + * associated with the current disk command. Perform the fill + * so that we avoid writing any length 64K records for + * controllers that don't follow the spec. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + */ +static void ata_fill_sg_dumb(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct scatterlist *sg; + unsigned int si, pi; + + pi = 0; + for_each_sg(qc->sg, sg, qc->n_elem, si) { + u32 addr, offset; + u32 sg_len, len, blen; + + /* determine if physical DMA addr spans 64K boundary. + * Note h/w doesn't support 64-bit, so we unconditionally + * truncate dma_addr_t to u32. + */ + addr = (u32) sg_dma_address(sg); + sg_len = sg_dma_len(sg); + + while (sg_len) { + offset = addr & 0xffff; + len = sg_len; + if ((offset + sg_len) > 0x10000) + len = 0x10000 - offset; + + blen = len & 0xffff; + ap->prd[pi].addr = cpu_to_le32(addr); + if (blen == 0) { + /* Some PATA chipsets like the CS5530 can't + cope with 0x0000 meaning 64K as the spec says */ + ap->prd[pi].flags_len = cpu_to_le32(0x8000); + blen = 0x8000; + ap->prd[++pi].addr = cpu_to_le32(addr + 0x8000); + } + ap->prd[pi].flags_len = cpu_to_le32(blen); + VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len); + + pi++; + sg_len -= len; + addr += len; + } + } + + ap->prd[pi - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); +} + +/** + * ata_qc_prep - Prepare taskfile for submission + * @qc: Metadata associated with taskfile to be prepared + * + * Prepare ATA taskfile for submission. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_qc_prep(struct ata_queued_cmd *qc) +{ + if (!(qc->flags & ATA_QCFLAG_DMAMAP)) + return; + + ata_fill_sg(qc); +} + +/** + * ata_dumb_qc_prep - Prepare taskfile for submission + * @qc: Metadata associated with taskfile to be prepared + * + * Prepare ATA taskfile for submission. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_dumb_qc_prep(struct ata_queued_cmd *qc) +{ + if (!(qc->flags & ATA_QCFLAG_DMAMAP)) + return; + + ata_fill_sg_dumb(qc); +} + /** * ata_check_status - Read device status reg & clear interrupt * @ap: port where the device is @@ -67,223 +243,1746 @@ u8 ata_check_status(struct ata_port *ap) * LOCKING: * Inherited from caller. */ -u8 ata_altstatus(struct ata_port *ap) +u8 ata_altstatus(struct ata_port *ap) +{ + if (ap->ops->check_altstatus) + return ap->ops->check_altstatus(ap); + + return ioread8(ap->ioaddr.altstatus_addr); +} + +/** + * ata_busy_sleep - sleep until BSY clears, or timeout + * @ap: port containing status register to be polled + * @tmout_pat: impatience timeout + * @tmout: overall timeout + * + * Sleep until ATA Status register bit BSY clears, + * or a timeout occurs. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ata_busy_sleep(struct ata_port *ap, + unsigned long tmout_pat, unsigned long tmout) +{ + unsigned long timer_start, timeout; + u8 status; + + status = ata_busy_wait(ap, ATA_BUSY, 300); + timer_start = jiffies; + timeout = timer_start + tmout_pat; + while (status != 0xff && (status & ATA_BUSY) && + time_before(jiffies, timeout)) { + msleep(50); + status = ata_busy_wait(ap, ATA_BUSY, 3); + } + + if (status != 0xff && (status & ATA_BUSY)) + ata_port_printk(ap, KERN_WARNING, + "port is slow to respond, please be patient " + "(Status 0x%x)\n", status); + + timeout = timer_start + tmout; + while (status != 0xff && (status & ATA_BUSY) && + time_before(jiffies, timeout)) { + msleep(50); + status = ata_chk_status(ap); + } + + if (status == 0xff) + return -ENODEV; + + if (status & ATA_BUSY) { + ata_port_printk(ap, KERN_ERR, "port failed to respond " + "(%lu secs, Status 0x%x)\n", + tmout / HZ, status); + return -EBUSY; + } + + return 0; +} + +/** + * ata_wait_ready - sleep until BSY clears, or timeout + * @ap: port containing status register to be polled + * @deadline: deadline jiffies for the operation + * + * Sleep until ATA Status register bit BSY clears, or timeout + * occurs. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ata_wait_ready(struct ata_port *ap, unsigned long deadline) +{ + unsigned long start = jiffies; + int warned = 0; + + while (1) { + u8 status = ata_chk_status(ap); + unsigned long now = jiffies; + + if (!(status & ATA_BUSY)) + return 0; + if (!ata_link_online(&ap->link) && status == 0xff) + return -ENODEV; + if (time_after(now, deadline)) + return -EBUSY; + + if (!warned && time_after(now, start + 5 * HZ) && + (deadline - now > 3 * HZ)) { + ata_port_printk(ap, KERN_WARNING, + "port is slow to respond, please be patient " + "(Status 0x%x)\n", status); + warned = 1; + } + + msleep(50); + } +} + +/** + * ata_std_dev_select - Select device 0/1 on ATA bus + * @ap: ATA channel to manipulate + * @device: ATA device (numbered from zero) to select + * + * Use the method defined in the ATA specification to + * make either device 0, or device 1, active on the + * ATA channel. Works with both PIO and MMIO. + * + * May be used as the dev_select() entry in ata_port_operations. + * + * LOCKING: + * caller. + */ +void ata_std_dev_select(struct ata_port *ap, unsigned int device) +{ + u8 tmp; + + if (device == 0) + tmp = ATA_DEVICE_OBS; + else + tmp = ATA_DEVICE_OBS | ATA_DEV1; + + iowrite8(tmp, ap->ioaddr.device_addr); + ata_pause(ap); /* needed; also flushes, for mmio */ +} + +/** + * ata_dev_select - Select device 0/1 on ATA bus + * @ap: ATA channel to manipulate + * @device: ATA device (numbered from zero) to select + * @wait: non-zero to wait for Status register BSY bit to clear + * @can_sleep: non-zero if context allows sleeping + * + * Use the method defined in the ATA specification to + * make either device 0, or device 1, active on the + * ATA channel. + * + * This is a high-level version of ata_std_dev_select(), + * which additionally provides the services of inserting + * the proper pauses and status polling, where needed. + * + * LOCKING: + * caller. + */ +void ata_dev_select(struct ata_port *ap, unsigned int device, + unsigned int wait, unsigned int can_sleep) +{ + if (ata_msg_probe(ap)) + ata_port_printk(ap, KERN_INFO, "ata_dev_select: ENTER, " + "device %u, wait %u\n", device, wait); + + if (wait) + ata_wait_idle(ap); + + ap->ops->dev_select(ap, device); + + if (wait) { + if (can_sleep && ap->link.device[device].class == ATA_DEV_ATAPI) + msleep(150); + ata_wait_idle(ap); + } +} + +/** + * ata_irq_on - Enable interrupts on a port. + * @ap: Port on which interrupts are enabled. + * + * Enable interrupts on a legacy IDE device using MMIO or PIO, + * wait for idle, clear any pending interrupts. + * + * LOCKING: + * Inherited from caller. + */ +u8 ata_irq_on(struct ata_port *ap) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + u8 tmp; + + ap->ctl &= ~ATA_NIEN; + ap->last_ctl = ap->ctl; + + if (ioaddr->ctl_addr) + iowrite8(ap->ctl, ioaddr->ctl_addr); + tmp = ata_wait_idle(ap); + + ap->ops->irq_clear(ap); + + return tmp; +} + +/** + * ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt. + * @ap: Port associated with this ATA transaction. + * + * Clear interrupt and error flags in DMA status register. + * + * May be used as the irq_clear() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_bmdma_irq_clear(struct ata_port *ap) +{ + void __iomem *mmio = ap->ioaddr.bmdma_addr; + + if (!mmio) + return; + + iowrite8(ioread8(mmio + ATA_DMA_STATUS), mmio + ATA_DMA_STATUS); +} + +/** + * ata_tf_load - send taskfile registers to host controller + * @ap: Port to which output is sent + * @tf: ATA taskfile register set + * + * Outputs ATA taskfile to standard ATA host controller. + * + * LOCKING: + * Inherited from caller. + */ +void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; + + if (tf->ctl != ap->last_ctl) { + if (ioaddr->ctl_addr) + iowrite8(tf->ctl, ioaddr->ctl_addr); + ap->last_ctl = tf->ctl; + ata_wait_idle(ap); + } + + if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { + WARN_ON(!ioaddr->ctl_addr); + iowrite8(tf->hob_feature, ioaddr->feature_addr); + iowrite8(tf->hob_nsect, ioaddr->nsect_addr); + iowrite8(tf->hob_lbal, ioaddr->lbal_addr); + iowrite8(tf->hob_lbam, ioaddr->lbam_addr); + iowrite8(tf->hob_lbah, ioaddr->lbah_addr); + VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", + tf->hob_feature, + tf->hob_nsect, + tf->hob_lbal, + tf->hob_lbam, + tf->hob_lbah); + } + + if (is_addr) { + iowrite8(tf->feature, ioaddr->feature_addr); + iowrite8(tf->nsect, ioaddr->nsect_addr); + iowrite8(tf->lbal, ioaddr->lbal_addr); + iowrite8(tf->lbam, ioaddr->lbam_addr); + iowrite8(tf->lbah, ioaddr->lbah_addr); + VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", + tf->feature, + tf->nsect, + tf->lbal, + tf->lbam, + tf->lbah); + } + + if (tf->flags & ATA_TFLAG_DEVICE) { + iowrite8(tf->device, ioaddr->device_addr); + VPRINTK("device 0x%X\n", tf->device); + } + + ata_wait_idle(ap); +} + +/** + * ata_tf_read - input device's ATA taskfile shadow registers + * @ap: Port from which input is read + * @tf: ATA taskfile register set for storing input + * + * Reads ATA taskfile registers for currently-selected device + * into @tf. Assumes the device has a fully SFF compliant task file + * layout and behaviour. If you device does not (eg has a different + * status method) then you will need to provide a replacement tf_read + * + * LOCKING: + * Inherited from caller. + */ +void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + + tf->command = ata_check_status(ap); + tf->feature = ioread8(ioaddr->error_addr); + tf->nsect = ioread8(ioaddr->nsect_addr); + tf->lbal = ioread8(ioaddr->lbal_addr); + tf->lbam = ioread8(ioaddr->lbam_addr); + tf->lbah = ioread8(ioaddr->lbah_addr); + tf->device = ioread8(ioaddr->device_addr); + + if (tf->flags & ATA_TFLAG_LBA48) { + if (likely(ioaddr->ctl_addr)) { + iowrite8(tf->ctl | ATA_HOB, ioaddr->ctl_addr); + tf->hob_feature = ioread8(ioaddr->error_addr); + tf->hob_nsect = ioread8(ioaddr->nsect_addr); + tf->hob_lbal = ioread8(ioaddr->lbal_addr); + tf->hob_lbam = ioread8(ioaddr->lbam_addr); + tf->hob_lbah = ioread8(ioaddr->lbah_addr); + iowrite8(tf->ctl, ioaddr->ctl_addr); + ap->last_ctl = tf->ctl; + } else + WARN_ON(1); + } +} + +/** + * ata_exec_command - issue ATA command to host controller + * @ap: port to which command is being issued + * @tf: ATA taskfile register set + * + * Issues ATA command, with proper synchronization with interrupt + * handler / other threads. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf) +{ + DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command); + + iowrite8(tf->command, ap->ioaddr.command_addr); + ata_pause(ap); +} + +/** + * ata_tf_to_host - issue ATA taskfile to host controller + * @ap: port to which command is being issued + * @tf: ATA taskfile register set + * + * Issues ATA taskfile register set to ATA host controller, + * with proper synchronization with interrupt handler and + * other threads. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +static inline void ata_tf_to_host(struct ata_port *ap, + const struct ata_taskfile *tf) +{ + ap->ops->tf_load(ap, tf); + ap->ops->exec_command(ap, tf); +} + +/** + * ata_data_xfer - Transfer data by PIO + * @dev: device to target + * @buf: data buffer + * @buflen: buffer length + * @rw: read/write + * + * Transfer data from/to the device data register by PIO. + * + * LOCKING: + * Inherited from caller. + * + * RETURNS: + * Bytes consumed. + */ +unsigned int ata_data_xfer(struct ata_device *dev, unsigned char *buf, + unsigned int buflen, int rw) +{ + struct ata_port *ap = dev->link->ap; + void __iomem *data_addr = ap->ioaddr.data_addr; + unsigned int words = buflen >> 1; + + /* Transfer multiple of 2 bytes */ + if (rw == READ) + ioread16_rep(data_addr, buf, words); + else + iowrite16_rep(data_addr, buf, words); + + /* Transfer trailing 1 byte, if any. */ + if (unlikely(buflen & 0x01)) { + __le16 align_buf[1] = { 0 }; + unsigned char *trailing_buf = buf + buflen - 1; + + if (rw == READ) { + align_buf[0] = cpu_to_le16(ioread16(data_addr)); + memcpy(trailing_buf, align_buf, 1); + } else { + memcpy(align_buf, trailing_buf, 1); + iowrite16(le16_to_cpu(align_buf[0]), data_addr); + } + words++; + } + + return words << 1; +} + +/** + * ata_data_xfer_noirq - Transfer data by PIO + * @dev: device to target + * @buf: data buffer + * @buflen: buffer length + * @rw: read/write + * + * Transfer data from/to the device data register by PIO. Do the + * transfer with interrupts disabled. + * + * LOCKING: + * Inherited from caller. + * + * RETURNS: + * Bytes consumed. + */ +unsigned int ata_data_xfer_noirq(struct ata_device *dev, unsigned char *buf, + unsigned int buflen, int rw) +{ + unsigned long flags; + unsigned int consumed; + + local_irq_save(flags); + consumed = ata_data_xfer(dev, buf, buflen, rw); + local_irq_restore(flags); + + return consumed; +} + +/** + * ata_pio_sector - Transfer a sector of data. + * @qc: Command on going + * + * Transfer qc->sect_size bytes of data from/to the ATA device. + * + * LOCKING: + * Inherited from caller. + */ +static void ata_pio_sector(struct ata_queued_cmd *qc) +{ + int do_write = (qc->tf.flags & ATA_TFLAG_WRITE); + struct ata_port *ap = qc->ap; + struct page *page; + unsigned int offset; + unsigned char *buf; + + if (qc->curbytes == qc->nbytes - qc->sect_size) + ap->hsm_task_state = HSM_ST_LAST; + + page = sg_page(qc->cursg); + offset = qc->cursg->offset + qc->cursg_ofs; + + /* get the current page and offset */ + page = nth_page(page, (offset >> PAGE_SHIFT)); + offset %= PAGE_SIZE; + + DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); + + if (PageHighMem(page)) { + unsigned long flags; + + /* FIXME: use a bounce buffer */ + local_irq_save(flags); + buf = kmap_atomic(page, KM_IRQ0); + + /* do the actual data transfer */ + ap->ops->data_xfer(qc->dev, buf + offset, qc->sect_size, do_write); + + kunmap_atomic(buf, KM_IRQ0); + local_irq_restore(flags); + } else { + buf = page_address(page); + ap->ops->data_xfer(qc->dev, buf + offset, qc->sect_size, do_write); + } + + qc->curbytes += qc->sect_size; + qc->cursg_ofs += qc->sect_size; + + if (qc->cursg_ofs == qc->cursg->length) { + qc->cursg = sg_next(qc->cursg); + qc->cursg_ofs = 0; + } +} + +/** + * ata_pio_sectors - Transfer one or many sectors. + * @qc: Command on going + * + * Transfer one or many sectors of data from/to the + * ATA device for the DRQ request. + * + * LOCKING: + * Inherited from caller. + */ +static void ata_pio_sectors(struct ata_queued_cmd *qc) +{ + if (is_multi_taskfile(&qc->tf)) { + /* READ/WRITE MULTIPLE */ + unsigned int nsect; + + WARN_ON(qc->dev->multi_count == 0); + + nsect = min((qc->nbytes - qc->curbytes) / qc->sect_size, + qc->dev->multi_count); + while (nsect--) + ata_pio_sector(qc); + } else + ata_pio_sector(qc); + + ata_altstatus(qc->ap); /* flush */ +} + +/** + * atapi_send_cdb - Write CDB bytes to hardware + * @ap: Port to which ATAPI device is attached. + * @qc: Taskfile currently active + * + * When device has indicated its readiness to accept + * a CDB, this function is called. Send the CDB. + * + * LOCKING: + * caller. + */ +static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc) +{ + /* send SCSI cdb */ + DPRINTK("send cdb\n"); + WARN_ON(qc->dev->cdb_len < 12); + + ap->ops->data_xfer(qc->dev, qc->cdb, qc->dev->cdb_len, 1); + ata_altstatus(ap); /* flush */ + + switch (qc->tf.protocol) { + case ATAPI_PROT_PIO: + ap->hsm_task_state = HSM_ST; + break; + case ATAPI_PROT_NODATA: + ap->hsm_task_state = HSM_ST_LAST; + break; + case ATAPI_PROT_DMA: + ap->hsm_task_state = HSM_ST_LAST; + /* initiate bmdma */ + ap->ops->bmdma_start(qc); + break; + } +} + +/** + * __atapi_pio_bytes - Transfer data from/to the ATAPI device. + * @qc: Command on going + * @bytes: number of bytes + * + * Transfer Transfer data from/to the ATAPI device. + * + * LOCKING: + * Inherited from caller. + * + */ +static int __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) +{ + int rw = (qc->tf.flags & ATA_TFLAG_WRITE) ? WRITE : READ; + struct ata_port *ap = qc->ap; + struct ata_device *dev = qc->dev; + struct ata_eh_info *ehi = &dev->link->eh_info; + struct scatterlist *sg; + struct page *page; + unsigned char *buf; + unsigned int offset, count, consumed; + +next_sg: + sg = qc->cursg; + if (unlikely(!sg)) { + ata_ehi_push_desc(ehi, "unexpected or too much trailing data " + "buf=%u cur=%u bytes=%u", + qc->nbytes, qc->curbytes, bytes); + return -1; + } + + page = sg_page(sg); + offset = sg->offset + qc->cursg_ofs; + + /* get the current page and offset */ + page = nth_page(page, (offset >> PAGE_SHIFT)); + offset %= PAGE_SIZE; + + /* don't overrun current sg */ + count = min(sg->length - qc->cursg_ofs, bytes); + + /* don't cross page boundaries */ + count = min(count, (unsigned int)PAGE_SIZE - offset); + + DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); + + if (PageHighMem(page)) { + unsigned long flags; + + /* FIXME: use bounce buffer */ + local_irq_save(flags); + buf = kmap_atomic(page, KM_IRQ0); + + /* do the actual data transfer */ + consumed = ap->ops->data_xfer(dev, buf + offset, count, rw); + + kunmap_atomic(buf, KM_IRQ0); + local_irq_restore(flags); + } else { + buf = page_address(page); + consumed = ap->ops->data_xfer(dev, buf + offset, count, rw); + } + + bytes -= min(bytes, consumed); + qc->curbytes += count; + qc->cursg_ofs += count; + + if (qc->cursg_ofs == sg->length) { + qc->cursg = sg_next(qc->cursg); + qc->cursg_ofs = 0; + } + + /* consumed can be larger than count only for the last transfer */ + WARN_ON(qc->cursg && count != consumed); + + if (bytes) + goto next_sg; + return 0; +} + +/** + * atapi_pio_bytes - Transfer data from/to the ATAPI device. + * @qc: Command on going + * + * Transfer Transfer data from/to the ATAPI device. + * + * LOCKING: + * Inherited from caller. + */ +static void atapi_pio_bytes(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *dev = qc->dev; + struct ata_eh_info *ehi = &dev->link->eh_info; + unsigned int ireason, bc_lo, bc_hi, bytes; + int i_write, do_write = (qc->tf.flags & ATA_TFLAG_WRITE) ? 1 : 0; + + /* Abuse qc->result_tf for temp storage of intermediate TF + * here to save some kernel stack usage. + * For normal completion, qc->result_tf is not relevant. For + * error, qc->result_tf is later overwritten by ata_qc_complete(). + * So, the correctness of qc->result_tf is not affected. + */ + ap->ops->tf_read(ap, &qc->result_tf); + ireason = qc->result_tf.nsect; + bc_lo = qc->result_tf.lbam; + bc_hi = qc->result_tf.lbah; + bytes = (bc_hi << 8) | bc_lo; + + /* shall be cleared to zero, indicating xfer of data */ + if (unlikely(ireason & (1 << 0))) + goto atapi_check; + + /* make sure transfer direction matches expected */ + i_write = ((ireason & (1 << 1)) == 0) ? 1 : 0; + if (unlikely(do_write != i_write)) + goto atapi_check; + + if (unlikely(!bytes)) + goto atapi_check; + + VPRINTK("ata%u: xfering %d bytes\n", ap->print_id, bytes); + + if (unlikely(__atapi_pio_bytes(qc, bytes))) + goto err_out; + ata_altstatus(ap); /* flush */ + + return; + + atapi_check: + ata_ehi_push_desc(ehi, "ATAPI check failed (ireason=0x%x bytes=%u)", + ireason, bytes); + err_out: + qc->err_mask |= AC_ERR_HSM; + ap->hsm_task_state = HSM_ST_ERR; +} + +/** + * ata_hsm_ok_in_wq - Check if the qc can be handled in the workqueue. + * @ap: the target ata_port + * @qc: qc on going + * + * RETURNS: + * 1 if ok in workqueue, 0 otherwise. + */ +static inline int ata_hsm_ok_in_wq(struct ata_port *ap, struct ata_queued_cmd *qc) +{ + if (qc->tf.flags & ATA_TFLAG_POLLING) + return 1; + + if (ap->hsm_task_state == HSM_ST_FIRST) { + if (qc->tf.protocol == ATA_PROT_PIO && + (qc->tf.flags & ATA_TFLAG_WRITE)) + return 1; + + if (ata_is_atapi(qc->tf.protocol) && + !(qc->dev->flags & ATA_DFLAG_CDB_INTR)) + return 1; + } + + return 0; +} + +/** + * ata_hsm_qc_complete - finish a qc running on standard HSM + * @qc: Command to complete + * @in_wq: 1 if called from workqueue, 0 otherwise + * + * Finish @qc which is running on standard HSM. + * + * LOCKING: + * If @in_wq is zero, spin_lock_irqsave(host lock). + * Otherwise, none on entry and grabs host lock. + */ +static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq) +{ + struct ata_port *ap = qc->ap; + unsigned long flags; + + if (ap->ops->error_handler) { + if (in_wq) { + spin_lock_irqsave(ap->lock, flags); + + /* EH might have kicked in while host lock is + * released. + */ + qc = ata_qc_from_tag(ap, qc->tag); + if (qc) { + if (likely(!(qc->err_mask & AC_ERR_HSM))) { + ap->ops->irq_on(ap); + ata_qc_complete(qc); + } else + ata_port_freeze(ap); + } + + spin_unlock_irqrestore(ap->lock, flags); + } else { + if (likely(!(qc->err_mask & AC_ERR_HSM))) + ata_qc_complete(qc); + else + ata_port_freeze(ap); + } + } else { + if (in_wq) { + spin_lock_irqsave(ap->lock, flags); + ap->ops->irq_on(ap); + ata_qc_complete(qc); + spin_unlock_irqrestore(ap->lock, flags); + } else + ata_qc_complete(qc); + } +} + +/** + * ata_hsm_move - move the HSM to the next state. + * @ap: the target ata_port + * @qc: qc on going + * @status: current device status + * @in_wq: 1 if called from workqueue, 0 otherwise + * + * RETURNS: + * 1 when poll next status needed, 0 otherwise. + */ +int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, + u8 status, int in_wq) +{ + unsigned long flags = 0; + int poll_next; + + WARN_ON((qc->flags & ATA_QCFLAG_ACTIVE) == 0); + + /* Make sure ata_qc_issue_prot() does not throw things + * like DMA polling into the workqueue. Notice that + * in_wq is not equivalent to (qc->tf.flags & ATA_TFLAG_POLLING). + */ + WARN_ON(in_wq != ata_hsm_ok_in_wq(ap, qc)); + +fsm_start: + DPRINTK("ata%u: protocol %d task_state %d (dev_stat 0x%X)\n", + ap->print_id, qc->tf.protocol, ap->hsm_task_state, status); + + switch (ap->hsm_task_state) { + case HSM_ST_FIRST: + /* Send first data block or PACKET CDB */ + + /* If polling, we will stay in the work queue after + * sending the data. Otherwise, interrupt handler + * takes over after sending the data. + */ + poll_next = (qc->tf.flags & ATA_TFLAG_POLLING); + + /* check device status */ + if (unlikely((status & ATA_DRQ) == 0)) { + /* handle BSY=0, DRQ=0 as error */ + if (likely(status & (ATA_ERR | ATA_DF))) + /* device stops HSM for abort/error */ + qc->err_mask |= AC_ERR_DEV; + else + /* HSM violation. Let EH handle this */ + qc->err_mask |= AC_ERR_HSM; + + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + + /* Device should not ask for data transfer (DRQ=1) + * when it finds something wrong. + * We ignore DRQ here and stop the HSM by + * changing hsm_task_state to HSM_ST_ERR and + * let the EH abort the command or reset the device. + */ + if (unlikely(status & (ATA_ERR | ATA_DF))) { + /* Some ATAPI tape drives forget to clear the ERR bit + * when doing the next command (mostly request sense). + * We ignore ERR here to workaround and proceed sending + * the CDB. + */ + if (!(qc->dev->horkage & ATA_HORKAGE_STUCK_ERR)) { + ata_port_printk(ap, KERN_WARNING, + "DRQ=1 with device error, " + "dev_stat 0x%X\n", status); + qc->err_mask |= AC_ERR_HSM; + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + } + + /* Send the CDB (atapi) or the first data block (ata pio out). + * During the state transition, interrupt handler shouldn't + * be invoked before the data transfer is complete and + * hsm_task_state is changed. Hence, the following locking. + */ + if (in_wq) + spin_lock_irqsave(ap->lock, flags); + + if (qc->tf.protocol == ATA_PROT_PIO) { + /* PIO data out protocol. + * send first data block. + */ + + /* ata_pio_sectors() might change the state + * to HSM_ST_LAST. so, the state is changed here + * before ata_pio_sectors(). + */ + ap->hsm_task_state = HSM_ST; + ata_pio_sectors(qc); + } else + /* send CDB */ + atapi_send_cdb(ap, qc); + + if (in_wq) + spin_unlock_irqrestore(ap->lock, flags); + + /* if polling, ata_pio_task() handles the rest. + * otherwise, interrupt handler takes over from here. + */ + break; + + case HSM_ST: + /* complete command or read/write the data register */ + if (qc->tf.protocol == ATAPI_PROT_PIO) { + /* ATAPI PIO protocol */ + if ((status & ATA_DRQ) == 0) { + /* No more data to transfer or device error. + * Device error will be tagged in HSM_ST_LAST. + */ + ap->hsm_task_state = HSM_ST_LAST; + goto fsm_start; + } + + /* Device should not ask for data transfer (DRQ=1) + * when it finds something wrong. + * We ignore DRQ here and stop the HSM by + * changing hsm_task_state to HSM_ST_ERR and + * let the EH abort the command or reset the device. + */ + if (unlikely(status & (ATA_ERR | ATA_DF))) { + ata_port_printk(ap, KERN_WARNING, "DRQ=1 with " + "device error, dev_stat 0x%X\n", + status); + qc->err_mask |= AC_ERR_HSM; + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + + atapi_pio_bytes(qc); + + if (unlikely(ap->hsm_task_state == HSM_ST_ERR)) + /* bad ireason reported by device */ + goto fsm_start; + + } else { + /* ATA PIO protocol */ + if (unlikely((status & ATA_DRQ) == 0)) { + /* handle BSY=0, DRQ=0 as error */ + if (likely(status & (ATA_ERR | ATA_DF))) + /* device stops HSM for abort/error */ + qc->err_mask |= AC_ERR_DEV; + else + /* HSM violation. Let EH handle this. + * Phantom devices also trigger this + * condition. Mark hint. + */ + qc->err_mask |= AC_ERR_HSM | + AC_ERR_NODEV_HINT; + + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + + /* For PIO reads, some devices may ask for + * data transfer (DRQ=1) alone with ERR=1. + * We respect DRQ here and transfer one + * block of junk data before changing the + * hsm_task_state to HSM_ST_ERR. + * + * For PIO writes, ERR=1 DRQ=1 doesn't make + * sense since the data block has been + * transferred to the device. + */ + if (unlikely(status & (ATA_ERR | ATA_DF))) { + /* data might be corrputed */ + qc->err_mask |= AC_ERR_DEV; + + if (!(qc->tf.flags & ATA_TFLAG_WRITE)) { + ata_pio_sectors(qc); + status = ata_wait_idle(ap); + } + + if (status & (ATA_BUSY | ATA_DRQ)) + qc->err_mask |= AC_ERR_HSM; + + /* ata_pio_sectors() might change the + * state to HSM_ST_LAST. so, the state + * is changed after ata_pio_sectors(). + */ + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + + ata_pio_sectors(qc); + + if (ap->hsm_task_state == HSM_ST_LAST && + (!(qc->tf.flags & ATA_TFLAG_WRITE))) { + /* all data read */ + status = ata_wait_idle(ap); + goto fsm_start; + } + } + + poll_next = 1; + break; + + case HSM_ST_LAST: + if (unlikely(!ata_ok(status))) { + qc->err_mask |= __ac_err_mask(status); + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + + /* no more data to transfer */ + DPRINTK("ata%u: dev %u command complete, drv_stat 0x%x\n", + ap->print_id, qc->dev->devno, status); + + WARN_ON(qc->err_mask); + + ap->hsm_task_state = HSM_ST_IDLE; + + /* complete taskfile transaction */ + ata_hsm_qc_complete(qc, in_wq); + + poll_next = 0; + break; + + case HSM_ST_ERR: + /* make sure qc->err_mask is available to + * know what's wrong and recover + */ + WARN_ON(qc->err_mask == 0); + + ap->hsm_task_state = HSM_ST_IDLE; + + /* complete taskfile transaction */ + ata_hsm_qc_complete(qc, in_wq); + + poll_next = 0; + break; + default: + poll_next = 0; + BUG(); + } + + return poll_next; +} + +void ata_pio_task(struct work_struct *work) +{ + struct ata_port *ap = + container_of(work, struct ata_port, port_task.work); + struct ata_queued_cmd *qc = ap->port_task_data; + u8 status; + int poll_next; + +fsm_start: + WARN_ON(ap->hsm_task_state == HSM_ST_IDLE); + + /* + * This is purely heuristic. This is a fast path. + * Sometimes when we enter, BSY will be cleared in + * a chk-status or two. If not, the drive is probably seeking + * or something. Snooze for a couple msecs, then + * chk-status again. If still busy, queue delayed work. + */ + status = ata_busy_wait(ap, ATA_BUSY, 5); + if (status & ATA_BUSY) { + msleep(2); + status = ata_busy_wait(ap, ATA_BUSY, 10); + if (status & ATA_BUSY) { + ata_pio_queue_task(ap, qc, ATA_SHORT_PAUSE); + return; + } + } + + /* move the HSM */ + poll_next = ata_hsm_move(ap, qc, status, 1); + + /* another command or interrupt handler + * may be running at this point. + */ + if (poll_next) + goto fsm_start; +} + +/** + * ata_qc_issue_prot - issue taskfile to device in proto-dependent manner + * @qc: command to issue to device + * + * Using various libata functions and hooks, this function + * starts an ATA command. ATA commands are grouped into + * classes called "protocols", and issuing each type of protocol + * is slightly different. + * + * May be used as the qc_issue() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: + * Zero on success, AC_ERR_* mask on failure + */ +unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + /* Use polling pio if the LLD doesn't handle + * interrupt driven pio and atapi CDB interrupt. + */ + if (ap->flags & ATA_FLAG_PIO_POLLING) { + switch (qc->tf.protocol) { + case ATA_PROT_PIO: + case ATA_PROT_NODATA: + case ATAPI_PROT_PIO: + case ATAPI_PROT_NODATA: + qc->tf.flags |= ATA_TFLAG_POLLING; + break; + case ATAPI_PROT_DMA: + if (qc->dev->flags & ATA_DFLAG_CDB_INTR) + /* see ata_dma_blacklisted() */ + BUG(); + break; + default: + break; + } + } + + /* select the device */ + ata_dev_select(ap, qc->dev->devno, 1, 0); + + /* start the command */ + switch (qc->tf.protocol) { + case ATA_PROT_NODATA: + if (qc->tf.flags & ATA_TFLAG_POLLING) + ata_qc_set_polling(qc); + + ata_tf_to_host(ap, &qc->tf); + ap->hsm_task_state = HSM_ST_LAST; + + if (qc->tf.flags & ATA_TFLAG_POLLING) + ata_pio_queue_task(ap, qc, 0); + + break; + + case ATA_PROT_DMA: + WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING); + + ap->ops->tf_load(ap, &qc->tf); /* load tf registers */ + ap->ops->bmdma_setup(qc); /* set up bmdma */ + ap->ops->bmdma_start(qc); /* initiate bmdma */ + ap->hsm_task_state = HSM_ST_LAST; + break; + + case ATA_PROT_PIO: + if (qc->tf.flags & ATA_TFLAG_POLLING) + ata_qc_set_polling(qc); + + ata_tf_to_host(ap, &qc->tf); + + if (qc->tf.flags & ATA_TFLAG_WRITE) { + /* PIO data out protocol */ + ap->hsm_task_state = HSM_ST_FIRST; + ata_pio_queue_task(ap, qc, 0); + + /* always send first data block using + * the ata_pio_task() codepath. + */ + } else { + /* PIO data in protocol */ + ap->hsm_task_state = HSM_ST; + + if (qc->tf.flags & ATA_TFLAG_POLLING) + ata_pio_queue_task(ap, qc, 0); + + /* if polling, ata_pio_task() handles the rest. + * otherwise, interrupt handler takes over from here. + */ + } + + break; + + case ATAPI_PROT_PIO: + case ATAPI_PROT_NODATA: + if (qc->tf.flags & ATA_TFLAG_POLLING) + ata_qc_set_polling(qc); + + ata_tf_to_host(ap, &qc->tf); + + ap->hsm_task_state = HSM_ST_FIRST; + + /* send cdb by polling if no cdb interrupt */ + if ((!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) || + (qc->tf.flags & ATA_TFLAG_POLLING)) + ata_pio_queue_task(ap, qc, 0); + break; + + case ATAPI_PROT_DMA: + WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING); + + ap->ops->tf_load(ap, &qc->tf); /* load tf registers */ + ap->ops->bmdma_setup(qc); /* set up bmdma */ + ap->hsm_task_state = HSM_ST_FIRST; + + /* send cdb by polling if no cdb interrupt */ + if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) + ata_pio_queue_task(ap, qc, 0); + break; + + default: + WARN_ON(1); + return AC_ERR_SYSTEM; + } + + return 0; +} + +/** + * ata_host_intr - Handle host interrupt for given (port, task) + * @ap: Port on which interrupt arrived (possibly...) + * @qc: Taskfile currently active in engine + * + * Handle host interrupt for given queued command. Currently, + * only DMA interrupts are handled. All other commands are + * handled via polling with interrupts disabled (nIEN bit). + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: + * One if interrupt was handled, zero if not (shared irq). + */ +inline unsigned int ata_host_intr(struct ata_port *ap, + struct ata_queued_cmd *qc) +{ + struct ata_eh_info *ehi = &ap->link.eh_info; + u8 status, host_stat = 0; + + VPRINTK("ata%u: protocol %d task_state %d\n", + ap->print_id, qc->tf.protocol, ap->hsm_task_state); + + /* Check whether we are expecting interrupt in this state */ + switch (ap->hsm_task_state) { + case HSM_ST_FIRST: + /* Some pre-ATAPI-4 devices assert INTRQ + * at this state when ready to receive CDB. + */ + + /* Check the ATA_DFLAG_CDB_INTR flag is enough here. + * The flag was turned on only for atapi devices. No + * need to check ata_is_atapi(qc->tf.protocol) again. + */ + if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) + goto idle_irq; + break; + case HSM_ST_LAST: + if (qc->tf.protocol == ATA_PROT_DMA || + qc->tf.protocol == ATAPI_PROT_DMA) { + /* check status of DMA engine */ + host_stat = ap->ops->bmdma_status(ap); + VPRINTK("ata%u: host_stat 0x%X\n", + ap->print_id, host_stat); + + /* if it's not our irq... */ + if (!(host_stat & ATA_DMA_INTR)) + goto idle_irq; + + /* before we do anything else, clear DMA-Start bit */ + ap->ops->bmdma_stop(qc); + + if (unlikely(host_stat & ATA_DMA_ERR)) { + /* error when transfering data to/from memory */ + qc->err_mask |= AC_ERR_HOST_BUS; + ap->hsm_task_state = HSM_ST_ERR; + } + } + break; + case HSM_ST: + break; + default: + goto idle_irq; + } + + /* check altstatus */ + status = ata_altstatus(ap); + if (status & ATA_BUSY) + goto idle_irq; + + /* check main status, clearing INTRQ */ + status = ata_chk_status(ap); + if (unlikely(status & ATA_BUSY)) + goto idle_irq; + + /* ack bmdma irq events */ + ap->ops->irq_clear(ap); + + ata_hsm_move(ap, qc, status, 0); + + if (unlikely(qc->err_mask) && (qc->tf.protocol == ATA_PROT_DMA || + qc->tf.protocol == ATAPI_PROT_DMA)) + ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat); + + return 1; /* irq handled */ + +idle_irq: + ap->stats.idle_irq++; + +#ifdef ATA_IRQ_TRAP + if ((ap->stats.idle_irq % 1000) == 0) { + ata_chk_status(ap); + ap->ops->irq_clear(ap); + ata_port_printk(ap, KERN_WARNING, "irq trap\n"); + return 1; + } +#endif + return 0; /* irq not handled */ +} + +/** + * ata_interrupt - Default ATA host interrupt handler + * @irq: irq line (unused) + * @dev_instance: pointer to our ata_host information structure + * + * Default interrupt handler for PCI IDE devices. Calls + * ata_host_intr() for each port that is not disabled. + * + * LOCKING: + * Obtains host lock during operation. + * + * RETURNS: + * IRQ_NONE or IRQ_HANDLED. + */ +irqreturn_t ata_interrupt(int irq, void *dev_instance) +{ + struct ata_host *host = dev_instance; + unsigned int i; + unsigned int handled = 0; + unsigned long flags; + + /* TODO: make _irqsave conditional on x86 PCI IDE legacy mode */ + spin_lock_irqsave(&host->lock, flags); + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap; + + ap = host->ports[i]; + if (ap && + !(ap->flags & ATA_FLAG_DISABLED)) { + struct ata_queued_cmd *qc; + + qc = ata_qc_from_tag(ap, ap->link.active_tag); + if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) && + (qc->flags & ATA_QCFLAG_ACTIVE)) + handled |= ata_host_intr(ap, qc); + } + } + + spin_unlock_irqrestore(&host->lock, flags); + + return IRQ_RETVAL(handled); +} + +/** + * ata_bmdma_freeze - Freeze BMDMA controller port + * @ap: port to freeze + * + * Freeze BMDMA controller port. + * + * LOCKING: + * Inherited from caller. + */ +void ata_bmdma_freeze(struct ata_port *ap) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + + ap->ctl |= ATA_NIEN; + ap->last_ctl = ap->ctl; + + if (ioaddr->ctl_addr) + iowrite8(ap->ctl, ioaddr->ctl_addr); + + /* Under certain circumstances, some controllers raise IRQ on + * ATA_NIEN manipulation. Also, many controllers fail to mask + * previously pending IRQ on ATA_NIEN assertion. Clear it. + */ + ata_chk_status(ap); + + ap->ops->irq_clear(ap); +} + +/** + * ata_bmdma_thaw - Thaw BMDMA controller port + * @ap: port to thaw + * + * Thaw BMDMA controller port. + * + * LOCKING: + * Inherited from caller. + */ +void ata_bmdma_thaw(struct ata_port *ap) { - if (ap->ops->check_altstatus) - return ap->ops->check_altstatus(ap); - - return ioread8(ap->ioaddr.altstatus_addr); + /* clear & re-enable interrupts */ + ata_chk_status(ap); + ap->ops->irq_clear(ap); + ap->ops->irq_on(ap); } /** - * ata_irq_on - Enable interrupts on a port. - * @ap: Port on which interrupts are enabled. + * ata_devchk - PATA device presence detection + * @ap: ATA channel to examine + * @device: Device to examine (starting at zero) * - * Enable interrupts on a legacy IDE device using MMIO or PIO, - * wait for idle, clear any pending interrupts. + * This technique was originally described in + * Hale Landis's ATADRVR (www.ata-atapi.com), and + * later found its way into the ATA/ATAPI spec. + * + * Write a pattern to the ATA shadow registers, + * and if a device is present, it will respond by + * correctly storing and echoing back the + * ATA shadow register contents. * * LOCKING: - * Inherited from caller. + * caller. */ -u8 ata_irq_on(struct ata_port *ap) +static unsigned int ata_devchk(struct ata_port *ap, unsigned int device) { struct ata_ioports *ioaddr = &ap->ioaddr; - u8 tmp; + u8 nsect, lbal; - ap->ctl &= ~ATA_NIEN; - ap->last_ctl = ap->ctl; + ap->ops->dev_select(ap, device); - if (ioaddr->ctl_addr) - iowrite8(ap->ctl, ioaddr->ctl_addr); - tmp = ata_wait_idle(ap); + iowrite8(0x55, ioaddr->nsect_addr); + iowrite8(0xaa, ioaddr->lbal_addr); - ap->ops->irq_clear(ap); + iowrite8(0xaa, ioaddr->nsect_addr); + iowrite8(0x55, ioaddr->lbal_addr); - return tmp; + iowrite8(0x55, ioaddr->nsect_addr); + iowrite8(0xaa, ioaddr->lbal_addr); + + nsect = ioread8(ioaddr->nsect_addr); + lbal = ioread8(ioaddr->lbal_addr); + + if ((nsect == 0x55) && (lbal == 0xaa)) + return 1; /* we found a device */ + + return 0; /* nothing found */ } /** - * ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt. - * @ap: Port associated with this ATA transaction. + * ata_dev_try_classify - Parse returned ATA device signature + * @dev: ATA device to classify (starting at zero) + * @present: device seems present + * @r_err: Value of error register on completion * - * Clear interrupt and error flags in DMA status register. + * After an event -- SRST, E.D.D., or SATA COMRESET -- occurs, + * an ATA/ATAPI-defined set of values is placed in the ATA + * shadow registers, indicating the results of device detection + * and diagnostics. * - * May be used as the irq_clear() entry in ata_port_operations. + * Select the ATA device, and read the values from the ATA shadow + * registers. Then parse according to the Error register value, + * and the spec-defined values examined by ata_dev_classify(). * * LOCKING: - * spin_lock_irqsave(host lock) + * caller. + * + * RETURNS: + * Device type - %ATA_DEV_ATA, %ATA_DEV_ATAPI or %ATA_DEV_NONE. */ -void ata_bmdma_irq_clear(struct ata_port *ap) +unsigned int ata_dev_try_classify(struct ata_device *dev, int present, + u8 *r_err) { - void __iomem *mmio = ap->ioaddr.bmdma_addr; + struct ata_port *ap = dev->link->ap; + struct ata_taskfile tf; + unsigned int class; + u8 err; + + ap->ops->dev_select(ap, dev->devno); + + memset(&tf, 0, sizeof(tf)); + + ap->ops->tf_read(ap, &tf); + err = tf.feature; + if (r_err) + *r_err = err; + + /* see if device passed diags: continue and warn later */ + if (err == 0) + /* diagnostic fail : do nothing _YET_ */ + dev->horkage |= ATA_HORKAGE_DIAGNOSTIC; + else if (err == 1) + /* do nothing */ ; + else if ((dev->devno == 0) && (err == 0x81)) + /* do nothing */ ; + else + return ATA_DEV_NONE; - if (!mmio) - return; + /* determine if device is ATA or ATAPI */ + class = ata_dev_classify(&tf); - iowrite8(ioread8(mmio + ATA_DMA_STATUS), mmio + ATA_DMA_STATUS); + if (class == ATA_DEV_UNKNOWN) { + /* If the device failed diagnostic, it's likely to + * have reported incorrect device signature too. + * Assume ATA device if the device seems present but + * device signature is invalid with diagnostic + * failure. + */ + if (present && (dev->horkage & ATA_HORKAGE_DIAGNOSTIC)) + class = ATA_DEV_ATA; + else + class = ATA_DEV_NONE; + } else if ((class == ATA_DEV_ATA) && (ata_chk_status(ap) == 0)) + class = ATA_DEV_NONE; + + return class; } -/** - * ata_tf_load - send taskfile registers to host controller - * @ap: Port to which output is sent - * @tf: ATA taskfile register set - * - * Outputs ATA taskfile to standard ATA host controller. - * - * LOCKING: - * Inherited from caller. - */ -void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) +static int ata_bus_post_reset(struct ata_port *ap, unsigned int devmask, + unsigned long deadline) { struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; + unsigned int dev0 = devmask & (1 << 0); + unsigned int dev1 = devmask & (1 << 1); + int rc, ret = 0; - if (tf->ctl != ap->last_ctl) { - if (ioaddr->ctl_addr) - iowrite8(tf->ctl, ioaddr->ctl_addr); - ap->last_ctl = tf->ctl; - ata_wait_idle(ap); + /* if device 0 was found in ata_devchk, wait for its + * BSY bit to clear + */ + if (dev0) { + rc = ata_wait_ready(ap, deadline); + if (rc) { + if (rc != -ENODEV) + return rc; + ret = rc; + } } - if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { - WARN_ON(!ioaddr->ctl_addr); - iowrite8(tf->hob_feature, ioaddr->feature_addr); - iowrite8(tf->hob_nsect, ioaddr->nsect_addr); - iowrite8(tf->hob_lbal, ioaddr->lbal_addr); - iowrite8(tf->hob_lbam, ioaddr->lbam_addr); - iowrite8(tf->hob_lbah, ioaddr->lbah_addr); - VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", - tf->hob_feature, - tf->hob_nsect, - tf->hob_lbal, - tf->hob_lbam, - tf->hob_lbah); - } + /* if device 1 was found in ata_devchk, wait for register + * access briefly, then wait for BSY to clear. + */ + if (dev1) { + int i; - if (is_addr) { - iowrite8(tf->feature, ioaddr->feature_addr); - iowrite8(tf->nsect, ioaddr->nsect_addr); - iowrite8(tf->lbal, ioaddr->lbal_addr); - iowrite8(tf->lbam, ioaddr->lbam_addr); - iowrite8(tf->lbah, ioaddr->lbah_addr); - VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", - tf->feature, - tf->nsect, - tf->lbal, - tf->lbam, - tf->lbah); - } + ap->ops->dev_select(ap, 1); - if (tf->flags & ATA_TFLAG_DEVICE) { - iowrite8(tf->device, ioaddr->device_addr); - VPRINTK("device 0x%X\n", tf->device); + /* Wait for register access. Some ATAPI devices fail + * to set nsect/lbal after reset, so don't waste too + * much time on it. We're gonna wait for !BSY anyway. + */ + for (i = 0; i < 2; i++) { + u8 nsect, lbal; + + nsect = ioread8(ioaddr->nsect_addr); + lbal = ioread8(ioaddr->lbal_addr); + if ((nsect == 1) && (lbal == 1)) + break; + msleep(50); /* give drive a breather */ + } + + rc = ata_wait_ready(ap, deadline); + if (rc) { + if (rc != -ENODEV) + return rc; + ret = rc; + } } - ata_wait_idle(ap); + /* is all this really necessary? */ + ap->ops->dev_select(ap, 0); + if (dev1) + ap->ops->dev_select(ap, 1); + if (dev0) + ap->ops->dev_select(ap, 0); + + return ret; } /** - * ata_tf_read - input device's ATA taskfile shadow registers - * @ap: Port from which input is read - * @tf: ATA taskfile register set for storing input + * ata_wait_after_reset - wait before checking status after reset + * @ap: port containing status register to be polled + * @deadline: deadline jiffies for the operation * - * Reads ATA taskfile registers for currently-selected device - * into @tf. Assumes the device has a fully SFF compliant task file - * layout and behaviour. If you device does not (eg has a different - * status method) then you will need to provide a replacement tf_read + * After reset, we need to pause a while before reading status. + * Also, certain combination of controller and device report 0xff + * for some duration (e.g. until SATA PHY is up and running) + * which is interpreted as empty port in ATA world. This + * function also waits for such devices to get out of 0xff + * status. * * LOCKING: - * Inherited from caller. + * Kernel thread context (may sleep). */ -void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) +void ata_wait_after_reset(struct ata_port *ap, unsigned long deadline) { - struct ata_ioports *ioaddr = &ap->ioaddr; + unsigned long until = jiffies + ATA_TMOUT_FF_WAIT; + + if (time_before(until, deadline)) + deadline = until; + + /* Spec mandates ">= 2ms" before checking status. We wait + * 150ms, because that was the magic delay used for ATAPI + * devices in Hale Landis's ATADRVR, for the period of time + * between when the ATA command register is written, and then + * status is checked. Because waiting for "a while" before + * checking status is fine, post SRST, we perform this magic + * delay here as well. + * + * Old drivers/ide uses the 2mS rule and then waits for ready. + */ + msleep(150); - tf->command = ata_check_status(ap); - tf->feature = ioread8(ioaddr->error_addr); - tf->nsect = ioread8(ioaddr->nsect_addr); - tf->lbal = ioread8(ioaddr->lbal_addr); - tf->lbam = ioread8(ioaddr->lbam_addr); - tf->lbah = ioread8(ioaddr->lbah_addr); - tf->device = ioread8(ioaddr->device_addr); + /* Wait for 0xff to clear. Some SATA devices take a long time + * to clear 0xff after reset. For example, HHD424020F7SV00 + * iVDR needs >= 800ms while. Quantum GoVault needs even more + * than that. + * + * Note that some PATA controllers (pata_ali) explode if + * status register is read more than once when there's no + * device attached. + */ + if (ap->flags & ATA_FLAG_SATA) { + while (1) { + u8 status = ata_chk_status(ap); - if (tf->flags & ATA_TFLAG_LBA48) { - if (likely(ioaddr->ctl_addr)) { - iowrite8(tf->ctl | ATA_HOB, ioaddr->ctl_addr); - tf->hob_feature = ioread8(ioaddr->error_addr); - tf->hob_nsect = ioread8(ioaddr->nsect_addr); - tf->hob_lbal = ioread8(ioaddr->lbal_addr); - tf->hob_lbam = ioread8(ioaddr->lbam_addr); - tf->hob_lbah = ioread8(ioaddr->lbah_addr); - iowrite8(tf->ctl, ioaddr->ctl_addr); - ap->last_ctl = tf->ctl; - } else - WARN_ON(1); + if (status != 0xff || time_after(jiffies, deadline)) + return; + + msleep(50); + } } } -/** - * ata_exec_command - issue ATA command to host controller - * @ap: port to which command is being issued - * @tf: ATA taskfile register set - * - * Issues ATA command, with proper synchronization with interrupt - * handler / other threads. - * - * LOCKING: - * spin_lock_irqsave(host lock) - */ -void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf) +static int ata_bus_softreset(struct ata_port *ap, unsigned int devmask, + unsigned long deadline) { - DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command); + struct ata_ioports *ioaddr = &ap->ioaddr; - iowrite8(tf->command, ap->ioaddr.command_addr); - ata_pause(ap); + DPRINTK("ata%u: bus reset via SRST\n", ap->print_id); + + /* software reset. causes dev0 to be selected */ + iowrite8(ap->ctl, ioaddr->ctl_addr); + udelay(20); /* FIXME: flush */ + iowrite8(ap->ctl | ATA_SRST, ioaddr->ctl_addr); + udelay(20); /* FIXME: flush */ + iowrite8(ap->ctl, ioaddr->ctl_addr); + + /* wait a while before checking status */ + ata_wait_after_reset(ap, deadline); + + /* Before we perform post reset processing we want to see if + * the bus shows 0xFF because the odd clown forgets the D7 + * pulldown resistor. + */ + if (ata_chk_status(ap) == 0xFF) + return -ENODEV; + + return ata_bus_post_reset(ap, devmask, deadline); } /** - * ata_bmdma_freeze - Freeze BMDMA controller port - * @ap: port to freeze + * ata_std_softreset - reset host port via ATA SRST + * @link: ATA link to reset + * @classes: resulting classes of attached devices + * @deadline: deadline jiffies for the operation * - * Freeze BMDMA controller port. + * Reset host port using ATA SRST. * * LOCKING: - * Inherited from caller. + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise. */ -void ata_bmdma_freeze(struct ata_port *ap) +int ata_std_softreset(struct ata_link *link, unsigned int *classes, + unsigned long deadline) { - struct ata_ioports *ioaddr = &ap->ioaddr; + struct ata_port *ap = link->ap; + unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; + unsigned int devmask = 0; + int rc; + u8 err; - ap->ctl |= ATA_NIEN; - ap->last_ctl = ap->ctl; + DPRINTK("ENTER\n"); - if (ioaddr->ctl_addr) - iowrite8(ap->ctl, ioaddr->ctl_addr); + if (ata_link_offline(link)) { + classes[0] = ATA_DEV_NONE; + goto out; + } - /* Under certain circumstances, some controllers raise IRQ on - * ATA_NIEN manipulation. Also, many controllers fail to mask - * previously pending IRQ on ATA_NIEN assertion. Clear it. - */ - ata_chk_status(ap); + /* determine if device 0/1 are present */ + if (ata_devchk(ap, 0)) + devmask |= (1 << 0); + if (slave_possible && ata_devchk(ap, 1)) + devmask |= (1 << 1); + + /* select device 0 again */ + ap->ops->dev_select(ap, 0); + + /* issue bus reset */ + DPRINTK("about to softreset, devmask=%x\n", devmask); + rc = ata_bus_softreset(ap, devmask, deadline); + /* if link is occupied, -ENODEV too is an error */ + if (rc && (rc != -ENODEV || sata_scr_valid(link))) { + ata_link_printk(link, KERN_ERR, "SRST failed (errno=%d)\n", rc); + return rc; + } - ap->ops->irq_clear(ap); + /* determine by signature whether we have ATA or ATAPI devices */ + classes[0] = ata_dev_try_classify(&link->device[0], + devmask & (1 << 0), &err); + if (slave_possible && err != 0x81) + classes[1] = ata_dev_try_classify(&link->device[1], + devmask & (1 << 1), &err); + + out: + DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]); + return 0; } /** - * ata_bmdma_thaw - Thaw BMDMA controller port - * @ap: port to thaw + * sata_std_hardreset - reset host port via SATA phy reset + * @link: link to reset + * @class: resulting class of attached device + * @deadline: deadline jiffies for the operation * - * Thaw BMDMA controller port. + * SATA phy-reset host port using DET bits of SControl register, + * wait for !BSY and classify the attached device. * * LOCKING: - * Inherited from caller. + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise. */ -void ata_bmdma_thaw(struct ata_port *ap) +int sata_std_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) { - /* clear & re-enable interrupts */ - ata_chk_status(ap); - ap->ops->irq_clear(ap); - ap->ops->irq_on(ap); + struct ata_port *ap = link->ap; + const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); + int rc; + + DPRINTK("ENTER\n"); + + /* do hardreset */ + rc = sata_link_hardreset(link, timing, deadline); + if (rc) { + ata_link_printk(link, KERN_ERR, + "COMRESET failed (errno=%d)\n", rc); + return rc; + } + + /* TODO: phy layer with polling, timeouts, etc. */ + if (ata_link_offline(link)) { + *class = ATA_DEV_NONE; + DPRINTK("EXIT, link offline\n"); + return 0; + } + + /* wait a while before checking status */ + ata_wait_after_reset(ap, deadline); + + /* If PMP is supported, we have to do follow-up SRST. Note + * that some PMPs don't send D2H Reg FIS after hardreset at + * all if the first port is empty. Wait for it just for a + * second and request follow-up SRST. + */ + if (ap->flags & ATA_FLAG_PMP) { + ata_wait_ready(ap, jiffies + HZ); + return -EAGAIN; + } + + rc = ata_wait_ready(ap, deadline); + /* link occupied, -ENODEV too is an error */ + if (rc) { + ata_link_printk(link, KERN_ERR, + "COMRESET failed (errno=%d)\n", rc); + return rc; + } + + ap->ops->dev_select(ap, 0); /* probably unnecessary */ + + *class = ata_dev_try_classify(link->device, 1, NULL); + + DPRINTK("EXIT, class=%u\n", *class); + return 0; } /** @@ -393,6 +2092,31 @@ int ata_sff_port_start(struct ata_port *ap) return 0; } +/** + * ata_std_ports - initialize ioaddr with standard port offsets. + * @ioaddr: IO address structure to be initialized + * + * Utility function which initializes data_addr, error_addr, + * feature_addr, nsect_addr, lbal_addr, lbam_addr, lbah_addr, + * device_addr, status_addr, and command_addr to standard offsets + * relative to cmd_addr. + * + * Does not set ctl_addr, altstatus_addr, bmdma_addr, or scr_addr. + */ +void ata_std_ports(struct ata_ioports *ioaddr) +{ + ioaddr->data_addr = ioaddr->cmd_addr + ATA_REG_DATA; + ioaddr->error_addr = ioaddr->cmd_addr + ATA_REG_ERR; + ioaddr->feature_addr = ioaddr->cmd_addr + ATA_REG_FEATURE; + ioaddr->nsect_addr = ioaddr->cmd_addr + ATA_REG_NSECT; + ioaddr->lbal_addr = ioaddr->cmd_addr + ATA_REG_LBAL; + ioaddr->lbam_addr = ioaddr->cmd_addr + ATA_REG_LBAM; + ioaddr->lbah_addr = ioaddr->cmd_addr + ATA_REG_LBAH; + ioaddr->device_addr = ioaddr->cmd_addr + ATA_REG_DEVICE; + ioaddr->status_addr = ioaddr->cmd_addr + ATA_REG_STATUS; + ioaddr->command_addr = ioaddr->cmd_addr + ATA_REG_CMD; +} + /** * ata_bmdma_setup - Set up PCI IDE BMDMA transaction * @qc: Info associated with this ATA transaction. @@ -494,11 +2218,94 @@ u8 ata_bmdma_status(struct ata_port *ap) } /** - * ata_noop_irq_clear - Noop placeholder for irq_clear - * @ap: Port associated with this ATA transaction. + * ata_bus_reset - reset host port and associated ATA channel + * @ap: port to reset + * + * This is typically the first time we actually start issuing + * commands to the ATA channel. We wait for BSY to clear, then + * issue EXECUTE DEVICE DIAGNOSTIC command, polling for its + * result. Determine what devices, if any, are on the channel + * by looking at the device 0/1 error register. Look at the signature + * stored in each device's taskfile registers, to determine if + * the device is ATA or ATAPI. + * + * LOCKING: + * PCI/etc. bus probe sem. + * Obtains host lock. + * + * SIDE EFFECTS: + * Sets ATA_FLAG_DISABLED if bus reset fails. + * + * DEPRECATED: + * This function is only for drivers which still use old EH and + * will be removed soon. */ -void ata_noop_irq_clear(struct ata_port *ap) +void ata_bus_reset(struct ata_port *ap) { + struct ata_device *device = ap->link.device; + struct ata_ioports *ioaddr = &ap->ioaddr; + unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; + u8 err; + unsigned int dev0, dev1 = 0, devmask = 0; + int rc; + + DPRINTK("ENTER, host %u, port %u\n", ap->print_id, ap->port_no); + + /* determine if device 0/1 are present */ + if (ap->flags & ATA_FLAG_SATA_RESET) + dev0 = 1; + else { + dev0 = ata_devchk(ap, 0); + if (slave_possible) + dev1 = ata_devchk(ap, 1); + } + + if (dev0) + devmask |= (1 << 0); + if (dev1) + devmask |= (1 << 1); + + /* select device 0 again */ + ap->ops->dev_select(ap, 0); + + /* issue bus reset */ + if (ap->flags & ATA_FLAG_SRST) { + rc = ata_bus_softreset(ap, devmask, jiffies + 40 * HZ); + if (rc && rc != -ENODEV) + goto err_out; + } + + /* + * determine by signature whether we have ATA or ATAPI devices + */ + device[0].class = ata_dev_try_classify(&device[0], dev0, &err); + if ((slave_possible) && (err != 0x81)) + device[1].class = ata_dev_try_classify(&device[1], dev1, &err); + + /* is double-select really necessary? */ + if (device[1].class != ATA_DEV_NONE) + ap->ops->dev_select(ap, 1); + if (device[0].class != ATA_DEV_NONE) + ap->ops->dev_select(ap, 0); + + /* if no devices were detected, disable this port */ + if ((device[0].class == ATA_DEV_NONE) && + (device[1].class == ATA_DEV_NONE)) + goto err_out; + + if (ap->flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST)) { + /* set up device control for ATA_FLAG_SATA_RESET */ + iowrite8(ap->ctl, ioaddr->ctl_addr); + } + + DPRINTK("EXIT\n"); + return; + +err_out: + ata_port_printk(ap, KERN_ERR, "disabling port\n"); + ata_port_disable(ap); + + DPRINTK("EXIT\n"); } #ifdef CONFIG_PCI @@ -914,3 +2721,49 @@ int ata_pci_init_one(struct pci_dev *pdev, #endif /* CONFIG_PCI */ +EXPORT_SYMBOL_GPL(ata_sff_port_ops); +EXPORT_SYMBOL_GPL(ata_bmdma_port_ops); +EXPORT_SYMBOL_GPL(ata_qc_prep); +EXPORT_SYMBOL_GPL(ata_dumb_qc_prep); +EXPORT_SYMBOL_GPL(ata_std_dev_select); +EXPORT_SYMBOL_GPL(ata_check_status); +EXPORT_SYMBOL_GPL(ata_altstatus); +EXPORT_SYMBOL_GPL(ata_busy_sleep); +EXPORT_SYMBOL_GPL(ata_wait_ready); +EXPORT_SYMBOL_GPL(ata_tf_load); +EXPORT_SYMBOL_GPL(ata_tf_read); +EXPORT_SYMBOL_GPL(ata_exec_command); +EXPORT_SYMBOL_GPL(ata_data_xfer); +EXPORT_SYMBOL_GPL(ata_data_xfer_noirq); +EXPORT_SYMBOL_GPL(ata_irq_on); +EXPORT_SYMBOL_GPL(ata_bmdma_irq_clear); +EXPORT_SYMBOL_GPL(ata_hsm_move); +EXPORT_SYMBOL_GPL(ata_qc_issue_prot); +EXPORT_SYMBOL_GPL(ata_host_intr); +EXPORT_SYMBOL_GPL(ata_interrupt); +EXPORT_SYMBOL_GPL(ata_bmdma_freeze); +EXPORT_SYMBOL_GPL(ata_bmdma_thaw); +EXPORT_SYMBOL_GPL(ata_std_prereset); +EXPORT_SYMBOL_GPL(ata_dev_try_classify); +EXPORT_SYMBOL_GPL(ata_wait_after_reset); +EXPORT_SYMBOL_GPL(ata_std_softreset); +EXPORT_SYMBOL_GPL(sata_std_hardreset); +EXPORT_SYMBOL_GPL(ata_std_postreset); +EXPORT_SYMBOL_GPL(ata_bmdma_error_handler); +EXPORT_SYMBOL_GPL(ata_bmdma_post_internal_cmd); +EXPORT_SYMBOL_GPL(ata_sff_port_start); +EXPORT_SYMBOL_GPL(ata_std_ports); +EXPORT_SYMBOL_GPL(ata_bmdma_setup); +EXPORT_SYMBOL_GPL(ata_bmdma_start); +EXPORT_SYMBOL_GPL(ata_bmdma_stop); +EXPORT_SYMBOL_GPL(ata_bmdma_status); +EXPORT_SYMBOL_GPL(ata_bus_reset); +#ifdef CONFIG_PCI +EXPORT_SYMBOL_GPL(ata_pci_clear_simplex); +EXPORT_SYMBOL_GPL(ata_pci_default_filter); +EXPORT_SYMBOL_GPL(ata_pci_init_bmdma); +EXPORT_SYMBOL_GPL(ata_pci_init_sff_host); +EXPORT_SYMBOL_GPL(ata_pci_prepare_sff_host); +EXPORT_SYMBOL_GPL(ata_pci_activate_sff_host); +EXPORT_SYMBOL_GPL(ata_pci_init_one); +#endif /* CONFIG_PCI */ diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index aa884f71a12..a69f663c740 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -67,6 +67,8 @@ extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev, unsigned int tag); extern u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev); extern void ata_dev_disable(struct ata_device *dev); +extern void ata_pio_queue_task(struct ata_port *ap, void *data, + unsigned long delay); extern void ata_port_flush_task(struct ata_port *ap); extern unsigned ata_exec_internal(struct ata_device *dev, struct ata_taskfile *tf, const u8 *cdb, @@ -91,8 +93,6 @@ extern void ata_qc_free(struct ata_queued_cmd *qc); extern void ata_qc_issue(struct ata_queued_cmd *qc); extern void __ata_qc_complete(struct ata_queued_cmd *qc); extern int ata_check_atapi_dma(struct ata_queued_cmd *qc); -extern void ata_dev_select(struct ata_port *ap, unsigned int device, - unsigned int wait, unsigned int can_sleep); extern void swap_buf_le16(u16 *buf, unsigned int buf_words); extern int ata_flush_cache(struct ata_device *dev); extern void ata_dev_init(struct ata_device *dev); @@ -194,7 +194,9 @@ extern int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, extern void ata_eh_finish(struct ata_port *ap); /* libata-sff.c */ +extern void ata_dev_select(struct ata_port *ap, unsigned int device, + unsigned int wait, unsigned int can_sleep); extern u8 ata_irq_on(struct ata_port *ap); - +extern void ata_pio_task(struct work_struct *work); #endif /* __LIBATA_H__ */ -- cgit v1.2.3