From 87c13493e6a59c0da55c2824f0205f9ef941b760 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 22 Dec 2008 12:16:27 +0100 Subject: mfd: move drivers/i2c/chips/tps65010.c to drivers/mfd Move the tps65010 driver from drivers/i2c/chips to drivers/mfd since it's more of a multi-function device than anything else, and since Jean is trying to vanish drivers/i2c/chips ASAP. One way to think of these chips are as the PMIC family most used with OMAP1 generation chips. Signed-off-by: David Brownell Signed-off-by: Samuel Ortiz --- drivers/i2c/chips/Kconfig | 13 - drivers/i2c/chips/Makefile | 1 - drivers/i2c/chips/tps65010.c | 1072 ------------------------------------------ 3 files changed, 1086 deletions(-) delete mode 100644 drivers/i2c/chips/tps65010.c (limited to 'drivers/i2c') diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig index 4c35702830c..fa69c992c44 100644 --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -126,19 +126,6 @@ config ISP1301_OMAP This driver can also be built as a module. If so, the module will be called isp1301_omap. -config TPS65010 - tristate "TPS6501x Power Management chips" - depends on GPIOLIB - default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK - help - If you say yes here you get support for the TPS6501x series of - Power Management chips. These include voltage regulators, - lithium ion/polymer battery charging, and other features that - are often used in portable devices like cell phones and cameras. - - This driver can also be built as a module. If so, the module - will be called tps65010. - config SENSORS_MAX6875 tristate "Maxim MAX6875 Power supply supervisor" depends on EXPERIMENTAL diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile index 23d2a31b0a6..0c7e2f1e0c4 100644 --- a/drivers/i2c/chips/Makefile +++ b/drivers/i2c/chips/Makefile @@ -19,7 +19,6 @@ obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o obj-$(CONFIG_PCF8575) += pcf8575.o obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o -obj-$(CONFIG_TPS65010) += tps65010.o obj-$(CONFIG_MENELAUS) += menelaus.o obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o obj-$(CONFIG_MCU_MPC8349EMITX) += mcu_mpc8349emitx.o diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c deleted file mode 100644 index acf8b9d5f57..00000000000 --- a/drivers/i2c/chips/tps65010.c +++ /dev/null @@ -1,1072 +0,0 @@ -/* - * tps65010 - driver for tps6501x power management chips - * - * Copyright (C) 2004 Texas Instruments - * Copyright (C) 2004-2005 David Brownell - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include - - -/*-------------------------------------------------------------------------*/ - -#define DRIVER_VERSION "2 May 2005" -#define DRIVER_NAME (tps65010_driver.driver.name) - -MODULE_DESCRIPTION("TPS6501x Power Management Driver"); -MODULE_LICENSE("GPL"); - -static struct i2c_driver tps65010_driver; - -/*-------------------------------------------------------------------------*/ - -/* This driver handles a family of multipurpose chips, which incorporate - * voltage regulators, lithium ion/polymer battery charging, GPIOs, LEDs, - * and other features often needed in portable devices like cell phones - * or digital cameras. - * - * The tps65011 and tps65013 have different voltage settings compared - * to tps65010 and tps65012. The tps65013 has a NO_CHG status/irq. - * All except tps65010 have "wait" mode, possibly defaulted so that - * battery-insert != device-on. - * - * We could distinguish between some models by checking VDCDC1.UVLO or - * other registers, unless they've been changed already after powerup - * as part of board setup by a bootloader. - */ -enum tps_model { - TPS65010, - TPS65011, - TPS65012, - TPS65013, -}; - -struct tps65010 { - struct i2c_client *client; - struct mutex lock; - struct delayed_work work; - struct dentry *file; - unsigned charging:1; - unsigned por:1; - unsigned model:8; - u16 vbus; - unsigned long flags; -#define FLAG_VBUS_CHANGED 0 -#define FLAG_IRQ_ENABLE 1 - - /* copies of last register state */ - u8 chgstatus, regstatus, chgconf; - u8 nmask1, nmask2; - - u8 outmask; - struct gpio_chip chip; - struct platform_device *leds; -}; - -#define POWER_POLL_DELAY msecs_to_jiffies(5000) - -/*-------------------------------------------------------------------------*/ - -#if defined(DEBUG) || defined(CONFIG_DEBUG_FS) - -static void dbg_chgstat(char *buf, size_t len, u8 chgstatus) -{ - snprintf(buf, len, "%02x%s%s%s%s%s%s%s%s\n", - chgstatus, - (chgstatus & TPS_CHG_USB) ? " USB" : "", - (chgstatus & TPS_CHG_AC) ? " AC" : "", - (chgstatus & TPS_CHG_THERM) ? " therm" : "", - (chgstatus & TPS_CHG_TERM) ? " done" : - ((chgstatus & (TPS_CHG_USB|TPS_CHG_AC)) - ? " (charging)" : ""), - (chgstatus & TPS_CHG_TAPER_TMO) ? " taper_tmo" : "", - (chgstatus & TPS_CHG_CHG_TMO) ? " charge_tmo" : "", - (chgstatus & TPS_CHG_PRECHG_TMO) ? " prechg_tmo" : "", - (chgstatus & TPS_CHG_TEMP_ERR) ? " temp_err" : ""); -} - -static void dbg_regstat(char *buf, size_t len, u8 regstatus) -{ - snprintf(buf, len, "%02x %s%s%s%s%s%s%s%s\n", - regstatus, - (regstatus & TPS_REG_ONOFF) ? "off" : "(on)", - (regstatus & TPS_REG_COVER) ? " uncover" : "", - (regstatus & TPS_REG_UVLO) ? " UVLO" : "", - (regstatus & TPS_REG_NO_CHG) ? " NO_CHG" : "", - (regstatus & TPS_REG_PG_LD02) ? " ld02_bad" : "", - (regstatus & TPS_REG_PG_LD01) ? " ld01_bad" : "", - (regstatus & TPS_REG_PG_MAIN) ? " main_bad" : "", - (regstatus & TPS_REG_PG_CORE) ? " core_bad" : ""); -} - -static void dbg_chgconf(int por, char *buf, size_t len, u8 chgconfig) -{ - const char *hibit; - - if (por) - hibit = (chgconfig & TPS_CHARGE_POR) - ? "POR=69ms" : "POR=1sec"; - else - hibit = (chgconfig & TPS65013_AUA) ? "AUA" : ""; - - snprintf(buf, len, "%02x %s%s%s AC=%d%% USB=%dmA %sCharge\n", - chgconfig, hibit, - (chgconfig & TPS_CHARGE_RESET) ? " reset" : "", - (chgconfig & TPS_CHARGE_FAST) ? " fast" : "", - ({int p; switch ((chgconfig >> 3) & 3) { - case 3: p = 100; break; - case 2: p = 75; break; - case 1: p = 50; break; - default: p = 25; break; - }; p; }), - (chgconfig & TPS_VBUS_CHARGING) - ? ((chgconfig & TPS_VBUS_500MA) ? 500 : 100) - : 0, - (chgconfig & TPS_CHARGE_ENABLE) ? "" : "No"); -} - -#endif - -#ifdef DEBUG - -static void show_chgstatus(const char *label, u8 chgstatus) -{ - char buf [100]; - - dbg_chgstat(buf, sizeof buf, chgstatus); - pr_debug("%s: %s %s", DRIVER_NAME, label, buf); -} - -static void show_regstatus(const char *label, u8 regstatus) -{ - char buf [100]; - - dbg_regstat(buf, sizeof buf, regstatus); - pr_debug("%s: %s %s", DRIVER_NAME, label, buf); -} - -static void show_chgconfig(int por, const char *label, u8 chgconfig) -{ - char buf [100]; - - dbg_chgconf(por, buf, sizeof buf, chgconfig); - pr_debug("%s: %s %s", DRIVER_NAME, label, buf); -} - -#else - -static inline void show_chgstatus(const char *label, u8 chgstatus) { } -static inline void show_regstatus(const char *label, u8 chgstatus) { } -static inline void show_chgconfig(int por, const char *label, u8 chgconfig) { } - -#endif - -#ifdef CONFIG_DEBUG_FS - -static int dbg_show(struct seq_file *s, void *_) -{ - struct tps65010 *tps = s->private; - u8 value, v2; - unsigned i; - char buf[100]; - const char *chip; - - switch (tps->model) { - case TPS65010: chip = "tps65010"; break; - case TPS65011: chip = "tps65011"; break; - case TPS65012: chip = "tps65012"; break; - case TPS65013: chip = "tps65013"; break; - default: chip = NULL; break; - } - seq_printf(s, "driver %s\nversion %s\nchip %s\n\n", - DRIVER_NAME, DRIVER_VERSION, chip); - - mutex_lock(&tps->lock); - - /* FIXME how can we tell whether a battery is present? - * likely involves a charge gauging chip (like BQ26501). - */ - - seq_printf(s, "%scharging\n\n", tps->charging ? "" : "(not) "); - - - /* registers for monitoring battery charging and status; note - * that reading chgstat and regstat may ack IRQs... - */ - value = i2c_smbus_read_byte_data(tps->client, TPS_CHGCONFIG); - dbg_chgconf(tps->por, buf, sizeof buf, value); - seq_printf(s, "chgconfig %s", buf); - - value = i2c_smbus_read_byte_data(tps->client, TPS_CHGSTATUS); - dbg_chgstat(buf, sizeof buf, value); - seq_printf(s, "chgstat %s", buf); - value = i2c_smbus_read_byte_data(tps->client, TPS_MASK1); - dbg_chgstat(buf, sizeof buf, value); - seq_printf(s, "mask1 %s", buf); - /* ignore ackint1 */ - - value = i2c_smbus_read_byte_data(tps->client, TPS_REGSTATUS); - dbg_regstat(buf, sizeof buf, value); - seq_printf(s, "regstat %s", buf); - value = i2c_smbus_read_byte_data(tps->client, TPS_MASK2); - dbg_regstat(buf, sizeof buf, value); - seq_printf(s, "mask2 %s\n", buf); - /* ignore ackint2 */ - - (void) schedule_delayed_work(&tps->work, POWER_POLL_DELAY); - - - /* VMAIN voltage, enable lowpower, etc */ - value = i2c_smbus_read_byte_data(tps->client, TPS_VDCDC1); - seq_printf(s, "vdcdc1 %02x\n", value); - - /* VCORE voltage, vibrator on/off */ - value = i2c_smbus_read_byte_data(tps->client, TPS_VDCDC2); - seq_printf(s, "vdcdc2 %02x\n", value); - - /* both LD0s, and their lowpower behavior */ - value = i2c_smbus_read_byte_data(tps->client, TPS_VREGS1); - seq_printf(s, "vregs1 %02x\n\n", value); - - - /* LEDs and GPIOs */ - value = i2c_smbus_read_byte_data(tps->client, TPS_LED1_ON); - v2 = i2c_smbus_read_byte_data(tps->client, TPS_LED1_PER); - seq_printf(s, "led1 %s, on=%02x, per=%02x, %d/%d msec\n", - (value & 0x80) - ? ((v2 & 0x80) ? "on" : "off") - : ((v2 & 0x80) ? "blink" : "(nPG)"), - value, v2, - (value & 0x7f) * 10, (v2 & 0x7f) * 100); - - value = i2c_smbus_read_byte_data(tps->client, TPS_LED2_ON); - v2 = i2c_smbus_read_byte_data(tps->client, TPS_LED2_PER); - seq_printf(s, "led2 %s, on=%02x, per=%02x, %d/%d msec\n", - (value & 0x80) - ? ((v2 & 0x80) ? "on" : "off") - : ((v2 & 0x80) ? "blink" : "off"), - value, v2, - (value & 0x7f) * 10, (v2 & 0x7f) * 100); - - value = i2c_smbus_read_byte_data(tps->client, TPS_DEFGPIO); - v2 = i2c_smbus_read_byte_data(tps->client, TPS_MASK3); - seq_printf(s, "defgpio %02x mask3 %02x\n", value, v2); - - for (i = 0; i < 4; i++) { - if (value & (1 << (4 + i))) - seq_printf(s, " gpio%d-out %s\n", i + 1, - (value & (1 << i)) ? "low" : "hi "); - else - seq_printf(s, " gpio%d-in %s %s %s\n", i + 1, - (value & (1 << i)) ? "hi " : "low", - (v2 & (1 << i)) ? "no-irq" : "irq", - (v2 & (1 << (4 + i))) ? "rising" : "falling"); - } - - mutex_unlock(&tps->lock); - return 0; -} - -static int dbg_tps_open(struct inode *inode, struct file *file) -{ - return single_open(file, dbg_show, inode->i_private); -} - -static const struct file_operations debug_fops = { - .open = dbg_tps_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -#define DEBUG_FOPS &debug_fops - -#else -#define DEBUG_FOPS NULL -#endif - -/*-------------------------------------------------------------------------*/ - -/* handle IRQS in a task context, so we can use I2C calls */ -static void tps65010_interrupt(struct tps65010 *tps) -{ - u8 tmp = 0, mask, poll; - - /* IRQs won't trigger for certain events, but we can get - * others by polling (normally, with external power applied). - */ - poll = 0; - - /* regstatus irqs */ - if (tps->nmask2) { - tmp = i2c_smbus_read_byte_data(tps->client, TPS_REGSTATUS); - mask = tmp ^ tps->regstatus; - tps->regstatus = tmp; - mask &= tps->nmask2; - } else - mask = 0; - if (mask) { - tps->regstatus = tmp; - /* may need to shut something down ... */ - - /* "off" usually means deep sleep */ - if (tmp & TPS_REG_ONOFF) { - pr_info("%s: power off button\n", DRIVER_NAME); -#if 0 - /* REVISIT: this might need its own workqueue - * plus tweaks including deadlock avoidance ... - * also needs to get error handling and probably - * an #ifdef CONFIG_HIBERNATION - */ - hibernate(); -#endif - poll = 1; - } - } - - /* chgstatus irqs */ - if (tps->nmask1) { - tmp = i2c_smbus_read_byte_data(tps->client, TPS_CHGSTATUS); - mask = tmp ^ tps->chgstatus; - tps->chgstatus = tmp; - mask &= tps->nmask1; - } else - mask = 0; - if (mask) { - unsigned charging = 0; - - show_chgstatus("chg/irq", tmp); - if (tmp & (TPS_CHG_USB|TPS_CHG_AC)) - show_chgconfig(tps->por, "conf", tps->chgconf); - - /* Unless it was turned off or disabled, we charge any - * battery whenever there's power available for it - * and the charger hasn't been disabled. - */ - if (!(tps->chgstatus & ~(TPS_CHG_USB|TPS_CHG_AC)) - && (tps->chgstatus & (TPS_CHG_USB|TPS_CHG_AC)) - && (tps->chgconf & TPS_CHARGE_ENABLE) - ) { - if (tps->chgstatus & TPS_CHG_USB) { - /* VBUS options are readonly until reconnect */ - if (mask & TPS_CHG_USB) - set_bit(FLAG_VBUS_CHANGED, &tps->flags); - charging = 1; - } else if (tps->chgstatus & TPS_CHG_AC) - charging = 1; - } - if (charging != tps->charging) { - tps->charging = charging; - pr_info("%s: battery %scharging\n", - DRIVER_NAME, charging ? "" : - ((tps->chgstatus & (TPS_CHG_USB|TPS_CHG_AC)) - ? "NOT " : "dis")); - } - } - - /* always poll to detect (a) power removal, without tps65013 - * NO_CHG IRQ; or (b) restart of charging after stop. - */ - if ((tps->model != TPS65013 || !tps->charging) - && (tps->chgstatus & (TPS_CHG_USB|TPS_CHG_AC))) - poll = 1; - if (poll) - (void) schedule_delayed_work(&tps->work, POWER_POLL_DELAY); - - /* also potentially gpio-in rise or fall */ -} - -/* handle IRQs and polling using keventd for now */ -static void tps65010_work(struct work_struct *work) -{ - struct tps65010 *tps; - - tps = container_of(work, struct tps65010, work.work); - mutex_lock(&tps->lock); - - tps65010_interrupt(tps); - - if (test_and_clear_bit(FLAG_VBUS_CHANGED, &tps->flags)) { - int status; - u8 chgconfig, tmp; - - chgconfig = i2c_smbus_read_byte_data(tps->client, - TPS_CHGCONFIG); - chgconfig &= ~(TPS_VBUS_500MA | TPS_VBUS_CHARGING); - if (tps->vbus == 500) - chgconfig |= TPS_VBUS_500MA | TPS_VBUS_CHARGING; - else if (tps->vbus >= 100) - chgconfig |= TPS_VBUS_CHARGING; - - status = i2c_smbus_write_byte_data(tps->client, - TPS_CHGCONFIG, chgconfig); - - /* vbus update fails unless VBUS is connected! */ - tmp = i2c_smbus_read_byte_data(tps->client, TPS_CHGCONFIG); - tps->chgconf = tmp; - show_chgconfig(tps->por, "update vbus", tmp); - } - - if (test_and_clear_bit(FLAG_IRQ_ENABLE, &tps->flags)) - enable_irq(tps->client->irq); - - mutex_unlock(&tps->lock); -} - -static irqreturn_t tps65010_irq(int irq, void *_tps) -{ - struct tps65010 *tps = _tps; - - disable_irq_nosync(irq); - set_bit(FLAG_IRQ_ENABLE, &tps->flags); - (void) schedule_work(&tps->work.work); - return IRQ_HANDLED; -} - -/*-------------------------------------------------------------------------*/ - -/* offsets 0..3 == GPIO1..GPIO4 - * offsets 4..5 == LED1/nPG, LED2 (we set one of the non-BLINK modes) - * offset 6 == vibrator motor driver - */ -static void -tps65010_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - if (offset < 4) - tps65010_set_gpio_out_value(offset + 1, value); - else if (offset < 6) - tps65010_set_led(offset - 3, value ? ON : OFF); - else - tps65010_set_vib(value); -} - -static int -tps65010_output(struct gpio_chip *chip, unsigned offset, int value) -{ - /* GPIOs may be input-only */ - if (offset < 4) { - struct tps65010 *tps; - - tps = container_of(chip, struct tps65010, chip); - if (!(tps->outmask & (1 << offset))) - return -EINVAL; - tps65010_set_gpio_out_value(offset + 1, value); - } else if (offset < 6) - tps65010_set_led(offset - 3, value ? ON : OFF); - else - tps65010_set_vib(value); - - return 0; -} - -static int tps65010_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - int value; - struct tps65010 *tps; - - tps = container_of(chip, struct tps65010, chip); - - if (offset < 4) { - value = i2c_smbus_read_byte_data(tps->client, TPS_DEFGPIO); - if (value < 0) - return 0; - if (value & (1 << (offset + 4))) /* output */ - return !(value & (1 << offset)); - else /* input */ - return (value & (1 << offset)); - } - - /* REVISIT we *could* report LED1/nPG and LED2 state ... */ - return 0; -} - - -/*-------------------------------------------------------------------------*/ - -static struct tps65010 *the_tps; - -static int __exit tps65010_remove(struct i2c_client *client) -{ - struct tps65010 *tps = i2c_get_clientdata(client); - struct tps65010_board *board = client->dev.platform_data; - - if (board && board->teardown) { - int status = board->teardown(client, board->context); - if (status < 0) - dev_dbg(&client->dev, "board %s %s err %d\n", - "teardown", client->name, status); - } - if (client->irq > 0) - free_irq(client->irq, tps); - cancel_delayed_work(&tps->work); - flush_scheduled_work(); - debugfs_remove(tps->file); - kfree(tps); - i2c_set_clientdata(client, NULL); - the_tps = NULL; - return 0; -} - -static int tps65010_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - struct tps65010 *tps; - int status; - struct tps65010_board *board = client->dev.platform_data; - - if (the_tps) { - dev_dbg(&client->dev, "only one tps6501x chip allowed\n"); - return -ENODEV; - } - - if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - return -EINVAL; - - tps = kzalloc(sizeof *tps, GFP_KERNEL); - if (!tps) - return -ENOMEM; - - mutex_init(&tps->lock); - INIT_DELAYED_WORK(&tps->work, tps65010_work); - tps->client = client; - tps->model = id->driver_data; - - /* the IRQ is active low, but many gpio lines can't support that - * so this driver uses falling-edge triggers instead. - */ - if (client->irq > 0) { - status = request_irq(client->irq, tps65010_irq, - IRQF_SAMPLE_RANDOM | IRQF_TRIGGER_FALLING, - DRIVER_NAME, tps); - if (status < 0) { - dev_dbg(&client->dev, "can't get IRQ %d, err %d\n", - client->irq, status); - goto fail1; - } - /* annoying race here, ideally we'd have an option - * to claim the irq now and enable it later. - * FIXME genirq IRQF_NOAUTOEN now solves that ... - */ - disable_irq(client->irq); - set_bit(FLAG_IRQ_ENABLE, &tps->flags); - } else - dev_warn(&client->dev, "IRQ not configured!\n"); - - - switch (tps->model) { - case TPS65010: - case TPS65012: - tps->por = 1; - break; - /* else CHGCONFIG.POR is replaced by AUA, enabling a WAIT mode */ - } - tps->chgconf = i2c_smbus_read_byte_data(client, TPS_CHGCONFIG); - show_chgconfig(tps->por, "conf/init", tps->chgconf); - - show_chgstatus("chg/init", - i2c_smbus_read_byte_data(client, TPS_CHGSTATUS)); - show_regstatus("reg/init", - i2c_smbus_read_byte_data(client, TPS_REGSTATUS)); - - pr_debug("%s: vdcdc1 0x%02x, vdcdc2 %02x, vregs1 %02x\n", DRIVER_NAME, - i2c_smbus_read_byte_data(client, TPS_VDCDC1), - i2c_smbus_read_byte_data(client, TPS_VDCDC2), - i2c_smbus_read_byte_data(client, TPS_VREGS1)); - pr_debug("%s: defgpio 0x%02x, mask3 0x%02x\n", DRIVER_NAME, - i2c_smbus_read_byte_data(client, TPS_DEFGPIO), - i2c_smbus_read_byte_data(client, TPS_MASK3)); - - i2c_set_clientdata(client, tps); - the_tps = tps; - -#if defined(CONFIG_USB_GADGET) && !defined(CONFIG_USB_OTG) - /* USB hosts can't draw VBUS. OTG devices could, later - * when OTG infrastructure enables it. USB peripherals - * could be relying on VBUS while booting, though. - */ - tps->vbus = 100; -#endif - - /* unmask the "interesting" irqs, then poll once to - * kickstart monitoring, initialize shadowed status - * registers, and maybe disable VBUS draw. - */ - tps->nmask1 = ~0; - (void) i2c_smbus_write_byte_data(client, TPS_MASK1, ~tps->nmask1); - - tps->nmask2 = TPS_REG_ONOFF; - if (tps->model == TPS65013) - tps->nmask2 |= TPS_REG_NO_CHG; - (void) i2c_smbus_write_byte_data(client, TPS_MASK2, ~tps->nmask2); - - (void) i2c_smbus_write_byte_data(client, TPS_MASK3, 0x0f - | i2c_smbus_read_byte_data(client, TPS_MASK3)); - - tps65010_work(&tps->work.work); - - tps->file = debugfs_create_file(DRIVER_NAME, S_IRUGO, NULL, - tps, DEBUG_FOPS); - - /* optionally register GPIOs */ - if (board && board->base > 0) { - tps->outmask = board->outmask; - - tps->chip.label = client->name; - tps->chip.dev = &client->dev; - tps->chip.owner = THIS_MODULE; - - tps->chip.set = tps65010_gpio_set; - tps->chip.direction_output = tps65010_output; - - /* NOTE: only partial support for inputs; nyet IRQs */ - tps->chip.get = tps65010_gpio_get; - - tps->chip.base = board->base; - tps->chip.ngpio = 7; - tps->chip.can_sleep = 1; - - status = gpiochip_add(&tps->chip); - if (status < 0) - dev_err(&client->dev, "can't add gpiochip, err %d\n", - status); - else if (board->setup) { - status = board->setup(client, board->context); - if (status < 0) { - dev_dbg(&client->dev, - "board %s %s err %d\n", - "setup", client->name, status); - status = 0; - } - } - } - - return 0; -fail1: - kfree(tps); - return status; -} - -static const struct i2c_device_id tps65010_id[] = { - { "tps65010", TPS65010 }, - { "tps65011", TPS65011 }, - { "tps65012", TPS65012 }, - { "tps65013", TPS65013 }, - { "tps65014", TPS65011 }, /* tps65011 charging at 6.5V max */ - { } -}; -MODULE_DEVICE_TABLE(i2c, tps65010_id); - -static struct i2c_driver tps65010_driver = { - .driver = { - .name = "tps65010", - }, - .probe = tps65010_probe, - .remove = __exit_p(tps65010_remove), - .id_table = tps65010_id, -}; - -/*-------------------------------------------------------------------------*/ - -/* Draw from VBUS: - * 0 mA -- DON'T DRAW (might supply power instead) - * 100 mA -- usb unit load (slowest charge rate) - * 500 mA -- usb high power (fast battery charge) - */ -int tps65010_set_vbus_draw(unsigned mA) -{ - unsigned long flags; - - if (!the_tps) - return -ENODEV; - - /* assumes non-SMP */ - local_irq_save(flags); - if (mA >= 500) - mA = 500; - else if (mA >= 100) - mA = 100; - else - mA = 0; - the_tps->vbus = mA; - if ((the_tps->chgstatus & TPS_CHG_USB) - && test_and_set_bit( - FLAG_VBUS_CHANGED, &the_tps->flags)) { - /* gadget drivers call this in_irq() */ - (void) schedule_work(&the_tps->work.work); - } - local_irq_restore(flags); - - return 0; -} -EXPORT_SYMBOL(tps65010_set_vbus_draw); - -/*-------------------------------------------------------------------------*/ -/* tps65010_set_gpio_out_value parameter: - * gpio: GPIO1, GPIO2, GPIO3 or GPIO4 - * value: LOW or HIGH - */ -int tps65010_set_gpio_out_value(unsigned gpio, unsigned value) -{ - int status; - unsigned defgpio; - - if (!the_tps) - return -ENODEV; - if ((gpio < GPIO1) || (gpio > GPIO4)) - return -EINVAL; - - mutex_lock(&the_tps->lock); - - defgpio = i2c_smbus_read_byte_data(the_tps->client, TPS_DEFGPIO); - - /* Configure GPIO for output */ - defgpio |= 1 << (gpio + 3); - - /* Writing 1 forces a logic 0 on that GPIO and vice versa */ - switch (value) { - case LOW: - defgpio |= 1 << (gpio - 1); /* set GPIO low by writing 1 */ - break; - /* case HIGH: */ - default: - defgpio &= ~(1 << (gpio - 1)); /* set GPIO high by writing 0 */ - break; - } - - status = i2c_smbus_write_byte_data(the_tps->client, - TPS_DEFGPIO, defgpio); - - pr_debug("%s: gpio%dout = %s, defgpio 0x%02x\n", DRIVER_NAME, - gpio, value ? "high" : "low", - i2c_smbus_read_byte_data(the_tps->client, TPS_DEFGPIO)); - - mutex_unlock(&the_tps->lock); - return status; -} -EXPORT_SYMBOL(tps65010_set_gpio_out_value); - -/*-------------------------------------------------------------------------*/ -/* tps65010_set_led parameter: - * led: LED1 or LED2 - * mode: ON, OFF or BLINK - */ -int tps65010_set_led(unsigned led, unsigned mode) -{ - int status; - unsigned led_on, led_per, offs; - - if (!the_tps) - return -ENODEV; - - if (led == LED1) - offs = 0; - else { - offs = 2; - led = LED2; - } - - mutex_lock(&the_tps->lock); - - pr_debug("%s: led%i_on 0x%02x\n", DRIVER_NAME, led, - i2c_smbus_read_byte_data(the_tps->client, - TPS_LED1_ON + offs)); - - pr_debug("%s: led%i_per 0x%02x\n", DRIVER_NAME, led, - i2c_smbus_read_byte_data(the_tps->client, - TPS_LED1_PER + offs)); - - switch (mode) { - case OFF: - led_on = 1 << 7; - led_per = 0 << 7; - break; - case ON: - led_on = 1 << 7; - led_per = 1 << 7; - break; - case BLINK: - led_on = 0x30 | (0 << 7); - led_per = 0x08 | (1 << 7); - break; - default: - printk(KERN_ERR "%s: Wrong mode parameter for set_led()\n", - DRIVER_NAME); - mutex_unlock(&the_tps->lock); - return -EINVAL; - } - - status = i2c_smbus_write_byte_data(the_tps->client, - TPS_LED1_ON + offs, led_on); - - if (status != 0) { - printk(KERN_ERR "%s: Failed to write led%i_on register\n", - DRIVER_NAME, led); - mutex_unlock(&the_tps->lock); - return status; - } - - pr_debug("%s: led%i_on 0x%02x\n", DRIVER_NAME, led, - i2c_smbus_read_byte_data(the_tps->client, TPS_LED1_ON + offs)); - - status = i2c_smbus_write_byte_data(the_tps->client, - TPS_LED1_PER + offs, led_per); - - if (status != 0) { - printk(KERN_ERR "%s: Failed to write led%i_per register\n", - DRIVER_NAME, led); - mutex_unlock(&the_tps->lock); - return status; - } - - pr_debug("%s: led%i_per 0x%02x\n", DRIVER_NAME, led, - i2c_smbus_read_byte_data(the_tps->client, - TPS_LED1_PER + offs)); - - mutex_unlock(&the_tps->lock); - - return status; -} -EXPORT_SYMBOL(tps65010_set_led); - -/*-------------------------------------------------------------------------*/ -/* tps65010_set_vib parameter: - * value: ON or OFF - */ -int tps65010_set_vib(unsigned value) -{ - int status; - unsigned vdcdc2; - - if (!the_tps) - return -ENODEV; - - mutex_lock(&the_tps->lock); - - vdcdc2 = i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC2); - vdcdc2 &= ~(1 << 1); - if (value) - vdcdc2 |= (1 << 1); - status = i2c_smbus_write_byte_data(the_tps->client, - TPS_VDCDC2, vdcdc2); - - pr_debug("%s: vibrator %s\n", DRIVER_NAME, value ? "on" : "off"); - - mutex_unlock(&the_tps->lock); - return status; -} -EXPORT_SYMBOL(tps65010_set_vib); - -/*-------------------------------------------------------------------------*/ -/* tps65010_set_low_pwr parameter: - * mode: ON or OFF - */ -int tps65010_set_low_pwr(unsigned mode) -{ - int status; - unsigned vdcdc1; - - if (!the_tps) - return -ENODEV; - - mutex_lock(&the_tps->lock); - - pr_debug("%s: %s low_pwr, vdcdc1 0x%02x\n", DRIVER_NAME, - mode ? "enable" : "disable", - i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1)); - - vdcdc1 = i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1); - - switch (mode) { - case OFF: - vdcdc1 &= ~TPS_ENABLE_LP; /* disable ENABLE_LP bit */ - break; - /* case ON: */ - default: - vdcdc1 |= TPS_ENABLE_LP; /* enable ENABLE_LP bit */ - break; - } - - status = i2c_smbus_write_byte_data(the_tps->client, - TPS_VDCDC1, vdcdc1); - - if (status != 0) - printk(KERN_ERR "%s: Failed to write vdcdc1 register\n", - DRIVER_NAME); - else - pr_debug("%s: vdcdc1 0x%02x\n", DRIVER_NAME, - i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1)); - - mutex_unlock(&the_tps->lock); - - return status; -} -EXPORT_SYMBOL(tps65010_set_low_pwr); - -/*-------------------------------------------------------------------------*/ -/* tps65010_config_vregs1 parameter: - * value to be written to VREGS1 register - * Note: The complete register is written, set all bits you need - */ -int tps65010_config_vregs1(unsigned value) -{ - int status; - - if (!the_tps) - return -ENODEV; - - mutex_lock(&the_tps->lock); - - pr_debug("%s: vregs1 0x%02x\n", DRIVER_NAME, - i2c_smbus_read_byte_data(the_tps->client, TPS_VREGS1)); - - status = i2c_smbus_write_byte_data(the_tps->client, - TPS_VREGS1, value); - - if (status != 0) - printk(KERN_ERR "%s: Failed to write vregs1 register\n", - DRIVER_NAME); - else - pr_debug("%s: vregs1 0x%02x\n", DRIVER_NAME, - i2c_smbus_read_byte_data(the_tps->client, TPS_VREGS1)); - - mutex_unlock(&the_tps->lock); - - return status; -} -EXPORT_SYMBOL(tps65010_config_vregs1); - -/*-------------------------------------------------------------------------*/ -/* tps65013_set_low_pwr parameter: - * mode: ON or OFF - */ - -/* FIXME: Assumes AC or USB power is present. Setting AUA bit is not - required if power supply is through a battery */ - -int tps65013_set_low_pwr(unsigned mode) -{ - int status; - unsigned vdcdc1, chgconfig; - - if (!the_tps || the_tps->por) - return -ENODEV; - - mutex_lock(&the_tps->lock); - - pr_debug("%s: %s low_pwr, chgconfig 0x%02x vdcdc1 0x%02x\n", - DRIVER_NAME, - mode ? "enable" : "disable", - i2c_smbus_read_byte_data(the_tps->client, TPS_CHGCONFIG), - i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1)); - - chgconfig = i2c_smbus_read_byte_data(the_tps->client, TPS_CHGCONFIG); - vdcdc1 = i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1); - - switch (mode) { - case OFF: - chgconfig &= ~TPS65013_AUA; /* disable AUA bit */ - vdcdc1 &= ~TPS_ENABLE_LP; /* disable ENABLE_LP bit */ - break; - /* case ON: */ - default: - chgconfig |= TPS65013_AUA; /* enable AUA bit */ - vdcdc1 |= TPS_ENABLE_LP; /* enable ENABLE_LP bit */ - break; - } - - status = i2c_smbus_write_byte_data(the_tps->client, - TPS_CHGCONFIG, chgconfig); - if (status != 0) { - printk(KERN_ERR "%s: Failed to write chconfig register\n", - DRIVER_NAME); - mutex_unlock(&the_tps->lock); - return status; - } - - chgconfig = i2c_smbus_read_byte_data(the_tps->client, TPS_CHGCONFIG); - the_tps->chgconf = chgconfig; - show_chgconfig(0, "chgconf", chgconfig); - - status = i2c_smbus_write_byte_data(the_tps->client, - TPS_VDCDC1, vdcdc1); - - if (status != 0) - printk(KERN_ERR "%s: Failed to write vdcdc1 register\n", - DRIVER_NAME); - else - pr_debug("%s: vdcdc1 0x%02x\n", DRIVER_NAME, - i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1)); - - mutex_unlock(&the_tps->lock); - - return status; -} -EXPORT_SYMBOL(tps65013_set_low_pwr); - -/*-------------------------------------------------------------------------*/ - -static int __init tps_init(void) -{ - u32 tries = 3; - int status = -ENODEV; - - printk(KERN_INFO "%s: version %s\n", DRIVER_NAME, DRIVER_VERSION); - - /* some boards have startup glitches */ - while (tries--) { - status = i2c_add_driver(&tps65010_driver); - if (the_tps) - break; - i2c_del_driver(&tps65010_driver); - if (!tries) { - printk(KERN_ERR "%s: no chip?\n", DRIVER_NAME); - return -ENODEV; - } - pr_debug("%s: re-probe ...\n", DRIVER_NAME); - msleep(10); - } - - return status; -} -/* NOTE: this MUST be initialized before the other parts of the system - * that rely on it ... but after the i2c bus on which this relies. - * That is, much earlier than on PC-type systems, which don't often use - * I2C as a core system bus. - */ -subsys_initcall(tps_init); - -static void __exit tps_exit(void) -{ - i2c_del_driver(&tps65010_driver); -} -module_exit(tps_exit); - -- cgit v1.2.3 From 88e75cc347f66bc20e3c2b920431fc07253d69be Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 22 Dec 2008 12:18:02 +0100 Subject: mfd: move drivers/i2c/chips/menelaus.c to drivers/mfd ove the menelaus driver from drivers/i2c/chips to drivers/mfd since it's more of a multi-function device than anything else, and since Jean is trying to vanish drivers/i2c/chips ASAP. One way to think of these chips are as the PMIC family most used with OMAP2 generation chips. Signed-off-by: David Brownell Signed-off-by: Samuel Ortiz --- drivers/i2c/chips/Kconfig | 10 - drivers/i2c/chips/Makefile | 1 - drivers/i2c/chips/menelaus.c | 1285 ------------------------------------------ 3 files changed, 1296 deletions(-) delete mode 100644 drivers/i2c/chips/menelaus.c (limited to 'drivers/i2c') diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig index fa69c992c44..864ac561fdb 100644 --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -151,16 +151,6 @@ config SENSORS_TSL2550 This driver can also be built as a module. If so, the module will be called tsl2550. -config MENELAUS - bool "TWL92330/Menelaus PM chip" - depends on I2C=y && ARCH_OMAP24XX - help - If you say yes here you get support for the Texas Instruments - TWL92330/Menelaus Power Management chip. This include voltage - regulators, Dual slot memory card tranceivers, real-time clock - and other features that are often used in portable devices like - cell phones and PDAs. - config MCU_MPC8349EMITX tristate "MPC8349E-mITX MCU driver" depends on I2C && PPC_83xx diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile index 0c7e2f1e0c4..8b95f41a500 100644 --- a/drivers/i2c/chips/Makefile +++ b/drivers/i2c/chips/Makefile @@ -19,7 +19,6 @@ obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o obj-$(CONFIG_PCF8575) += pcf8575.o obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o -obj-$(CONFIG_MENELAUS) += menelaus.o obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o obj-$(CONFIG_MCU_MPC8349EMITX) += mcu_mpc8349emitx.o diff --git a/drivers/i2c/chips/menelaus.c b/drivers/i2c/chips/menelaus.c deleted file mode 100644 index 4b364bae6b3..00000000000 --- a/drivers/i2c/chips/menelaus.c +++ /dev/null @@ -1,1285 +0,0 @@ -/* - * Copyright (C) 2004 Texas Instruments, Inc. - * - * Some parts based tps65010.c: - * Copyright (C) 2004 Texas Instruments and - * Copyright (C) 2004-2005 David Brownell - * - * Some parts based on tlv320aic24.c: - * Copyright (C) by Kai Svahn - * - * Changes for interrupt handling and clean-up by - * Tony Lindgren and Imre Deak - * Cleanup and generalized support for voltage setting by - * Juha Yrjola - * Added support for controlling VCORE and regulator sleep states, - * Amit Kucheria - * Copyright (C) 2005, 2006 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include -#include - -#define DRIVER_NAME "menelaus" - -#define MENELAUS_I2C_ADDRESS 0x72 - -#define MENELAUS_REV 0x01 -#define MENELAUS_VCORE_CTRL1 0x02 -#define MENELAUS_VCORE_CTRL2 0x03 -#define MENELAUS_VCORE_CTRL3 0x04 -#define MENELAUS_VCORE_CTRL4 0x05 -#define MENELAUS_VCORE_CTRL5 0x06 -#define MENELAUS_DCDC_CTRL1 0x07 -#define MENELAUS_DCDC_CTRL2 0x08 -#define MENELAUS_DCDC_CTRL3 0x09 -#define MENELAUS_LDO_CTRL1 0x0A -#define MENELAUS_LDO_CTRL2 0x0B -#define MENELAUS_LDO_CTRL3 0x0C -#define MENELAUS_LDO_CTRL4 0x0D -#define MENELAUS_LDO_CTRL5 0x0E -#define MENELAUS_LDO_CTRL6 0x0F -#define MENELAUS_LDO_CTRL7 0x10 -#define MENELAUS_LDO_CTRL8 0x11 -#define MENELAUS_SLEEP_CTRL1 0x12 -#define MENELAUS_SLEEP_CTRL2 0x13 -#define MENELAUS_DEVICE_OFF 0x14 -#define MENELAUS_OSC_CTRL 0x15 -#define MENELAUS_DETECT_CTRL 0x16 -#define MENELAUS_INT_MASK1 0x17 -#define MENELAUS_INT_MASK2 0x18 -#define MENELAUS_INT_STATUS1 0x19 -#define MENELAUS_INT_STATUS2 0x1A -#define MENELAUS_INT_ACK1 0x1B -#define MENELAUS_INT_ACK2 0x1C -#define MENELAUS_GPIO_CTRL 0x1D -#define MENELAUS_GPIO_IN 0x1E -#define MENELAUS_GPIO_OUT 0x1F -#define MENELAUS_BBSMS 0x20 -#define MENELAUS_RTC_CTRL 0x21 -#define MENELAUS_RTC_UPDATE 0x22 -#define MENELAUS_RTC_SEC 0x23 -#define MENELAUS_RTC_MIN 0x24 -#define MENELAUS_RTC_HR 0x25 -#define MENELAUS_RTC_DAY 0x26 -#define MENELAUS_RTC_MON 0x27 -#define MENELAUS_RTC_YR 0x28 -#define MENELAUS_RTC_WKDAY 0x29 -#define MENELAUS_RTC_AL_SEC 0x2A -#define MENELAUS_RTC_AL_MIN 0x2B -#define MENELAUS_RTC_AL_HR 0x2C -#define MENELAUS_RTC_AL_DAY 0x2D -#define MENELAUS_RTC_AL_MON 0x2E -#define MENELAUS_RTC_AL_YR 0x2F -#define MENELAUS_RTC_COMP_MSB 0x30 -#define MENELAUS_RTC_COMP_LSB 0x31 -#define MENELAUS_S1_PULL_EN 0x32 -#define MENELAUS_S1_PULL_DIR 0x33 -#define MENELAUS_S2_PULL_EN 0x34 -#define MENELAUS_S2_PULL_DIR 0x35 -#define MENELAUS_MCT_CTRL1 0x36 -#define MENELAUS_MCT_CTRL2 0x37 -#define MENELAUS_MCT_CTRL3 0x38 -#define MENELAUS_MCT_PIN_ST 0x39 -#define MENELAUS_DEBOUNCE1 0x3A - -#define IH_MENELAUS_IRQS 12 -#define MENELAUS_MMC_S1CD_IRQ 0 /* MMC slot 1 card change */ -#define MENELAUS_MMC_S2CD_IRQ 1 /* MMC slot 2 card change */ -#define MENELAUS_MMC_S1D1_IRQ 2 /* MMC DAT1 low in slot 1 */ -#define MENELAUS_MMC_S2D1_IRQ 3 /* MMC DAT1 low in slot 2 */ -#define MENELAUS_LOWBAT_IRQ 4 /* Low battery */ -#define MENELAUS_HOTDIE_IRQ 5 /* Hot die detect */ -#define MENELAUS_UVLO_IRQ 6 /* UVLO detect */ -#define MENELAUS_TSHUT_IRQ 7 /* Thermal shutdown */ -#define MENELAUS_RTCTMR_IRQ 8 /* RTC timer */ -#define MENELAUS_RTCALM_IRQ 9 /* RTC alarm */ -#define MENELAUS_RTCERR_IRQ 10 /* RTC error */ -#define MENELAUS_PSHBTN_IRQ 11 /* Push button */ -#define MENELAUS_RESERVED12_IRQ 12 /* Reserved */ -#define MENELAUS_RESERVED13_IRQ 13 /* Reserved */ -#define MENELAUS_RESERVED14_IRQ 14 /* Reserved */ -#define MENELAUS_RESERVED15_IRQ 15 /* Reserved */ - -static void menelaus_work(struct work_struct *_menelaus); - -struct menelaus_chip { - struct mutex lock; - struct i2c_client *client; - struct work_struct work; -#ifdef CONFIG_RTC_DRV_TWL92330 - struct rtc_device *rtc; - u8 rtc_control; - unsigned uie:1; -#endif - unsigned vcore_hw_mode:1; - u8 mask1, mask2; - void (*handlers[16])(struct menelaus_chip *); - void (*mmc_callback)(void *data, u8 mask); - void *mmc_callback_data; -}; - -static struct menelaus_chip *the_menelaus; - -static int menelaus_write_reg(int reg, u8 value) -{ - int val = i2c_smbus_write_byte_data(the_menelaus->client, reg, value); - - if (val < 0) { - pr_err(DRIVER_NAME ": write error"); - return val; - } - - return 0; -} - -static int menelaus_read_reg(int reg) -{ - int val = i2c_smbus_read_byte_data(the_menelaus->client, reg); - - if (val < 0) - pr_err(DRIVER_NAME ": read error"); - - return val; -} - -static int menelaus_enable_irq(int irq) -{ - if (irq > 7) { - irq -= 8; - the_menelaus->mask2 &= ~(1 << irq); - return menelaus_write_reg(MENELAUS_INT_MASK2, - the_menelaus->mask2); - } else { - the_menelaus->mask1 &= ~(1 << irq); - return menelaus_write_reg(MENELAUS_INT_MASK1, - the_menelaus->mask1); - } -} - -static int menelaus_disable_irq(int irq) -{ - if (irq > 7) { - irq -= 8; - the_menelaus->mask2 |= (1 << irq); - return menelaus_write_reg(MENELAUS_INT_MASK2, - the_menelaus->mask2); - } else { - the_menelaus->mask1 |= (1 << irq); - return menelaus_write_reg(MENELAUS_INT_MASK1, - the_menelaus->mask1); - } -} - -static int menelaus_ack_irq(int irq) -{ - if (irq > 7) - return menelaus_write_reg(MENELAUS_INT_ACK2, 1 << (irq - 8)); - else - return menelaus_write_reg(MENELAUS_INT_ACK1, 1 << irq); -} - -/* Adds a handler for an interrupt. Does not run in interrupt context */ -static int menelaus_add_irq_work(int irq, - void (*handler)(struct menelaus_chip *)) -{ - int ret = 0; - - mutex_lock(&the_menelaus->lock); - the_menelaus->handlers[irq] = handler; - ret = menelaus_enable_irq(irq); - mutex_unlock(&the_menelaus->lock); - - return ret; -} - -/* Removes handler for an interrupt */ -static int menelaus_remove_irq_work(int irq) -{ - int ret = 0; - - mutex_lock(&the_menelaus->lock); - ret = menelaus_disable_irq(irq); - the_menelaus->handlers[irq] = NULL; - mutex_unlock(&the_menelaus->lock); - - return ret; -} - -/* - * Gets scheduled when a card detect interrupt happens. Note that in some cases - * this line is wired to card cover switch rather than the card detect switch - * in each slot. In this case the cards are not seen by menelaus. - * FIXME: Add handling for D1 too - */ -static void menelaus_mmc_cd_work(struct menelaus_chip *menelaus_hw) -{ - int reg; - unsigned char card_mask = 0; - - reg = menelaus_read_reg(MENELAUS_MCT_PIN_ST); - if (reg < 0) - return; - - if (!(reg & 0x1)) - card_mask |= (1 << 0); - - if (!(reg & 0x2)) - card_mask |= (1 << 1); - - if (menelaus_hw->mmc_callback) - menelaus_hw->mmc_callback(menelaus_hw->mmc_callback_data, - card_mask); -} - -/* - * Toggles the MMC slots between open-drain and push-pull mode. - */ -int menelaus_set_mmc_opendrain(int slot, int enable) -{ - int ret, val; - - if (slot != 1 && slot != 2) - return -EINVAL; - mutex_lock(&the_menelaus->lock); - ret = menelaus_read_reg(MENELAUS_MCT_CTRL1); - if (ret < 0) { - mutex_unlock(&the_menelaus->lock); - return ret; - } - val = ret; - if (slot == 1) { - if (enable) - val |= 1 << 2; - else - val &= ~(1 << 2); - } else { - if (enable) - val |= 1 << 3; - else - val &= ~(1 << 3); - } - ret = menelaus_write_reg(MENELAUS_MCT_CTRL1, val); - mutex_unlock(&the_menelaus->lock); - - return ret; -} -EXPORT_SYMBOL(menelaus_set_mmc_opendrain); - -int menelaus_set_slot_sel(int enable) -{ - int ret; - - mutex_lock(&the_menelaus->lock); - ret = menelaus_read_reg(MENELAUS_GPIO_CTRL); - if (ret < 0) - goto out; - ret |= 0x02; - if (enable) - ret |= 1 << 5; - else - ret &= ~(1 << 5); - ret = menelaus_write_reg(MENELAUS_GPIO_CTRL, ret); -out: - mutex_unlock(&the_menelaus->lock); - return ret; -} -EXPORT_SYMBOL(menelaus_set_slot_sel); - -int menelaus_set_mmc_slot(int slot, int enable, int power, int cd_en) -{ - int ret, val; - - if (slot != 1 && slot != 2) - return -EINVAL; - if (power >= 3) - return -EINVAL; - - mutex_lock(&the_menelaus->lock); - - ret = menelaus_read_reg(MENELAUS_MCT_CTRL2); - if (ret < 0) - goto out; - val = ret; - if (slot == 1) { - if (cd_en) - val |= (1 << 4) | (1 << 6); - else - val &= ~((1 << 4) | (1 << 6)); - } else { - if (cd_en) - val |= (1 << 5) | (1 << 7); - else - val &= ~((1 << 5) | (1 << 7)); - } - ret = menelaus_write_reg(MENELAUS_MCT_CTRL2, val); - if (ret < 0) - goto out; - - ret = menelaus_read_reg(MENELAUS_MCT_CTRL3); - if (ret < 0) - goto out; - val = ret; - if (slot == 1) { - if (enable) - val |= 1 << 0; - else - val &= ~(1 << 0); - } else { - int b; - - if (enable) - ret |= 1 << 1; - else - ret &= ~(1 << 1); - b = menelaus_read_reg(MENELAUS_MCT_CTRL2); - b &= ~0x03; - b |= power; - ret = menelaus_write_reg(MENELAUS_MCT_CTRL2, b); - if (ret < 0) - goto out; - } - /* Disable autonomous shutdown */ - val &= ~(0x03 << 2); - ret = menelaus_write_reg(MENELAUS_MCT_CTRL3, val); -out: - mutex_unlock(&the_menelaus->lock); - return ret; -} -EXPORT_SYMBOL(menelaus_set_mmc_slot); - -int menelaus_register_mmc_callback(void (*callback)(void *data, u8 card_mask), - void *data) -{ - int ret = 0; - - the_menelaus->mmc_callback_data = data; - the_menelaus->mmc_callback = callback; - ret = menelaus_add_irq_work(MENELAUS_MMC_S1CD_IRQ, - menelaus_mmc_cd_work); - if (ret < 0) - return ret; - ret = menelaus_add_irq_work(MENELAUS_MMC_S2CD_IRQ, - menelaus_mmc_cd_work); - if (ret < 0) - return ret; - ret = menelaus_add_irq_work(MENELAUS_MMC_S1D1_IRQ, - menelaus_mmc_cd_work); - if (ret < 0) - return ret; - ret = menelaus_add_irq_work(MENELAUS_MMC_S2D1_IRQ, - menelaus_mmc_cd_work); - - return ret; -} -EXPORT_SYMBOL(menelaus_register_mmc_callback); - -void menelaus_unregister_mmc_callback(void) -{ - menelaus_remove_irq_work(MENELAUS_MMC_S1CD_IRQ); - menelaus_remove_irq_work(MENELAUS_MMC_S2CD_IRQ); - menelaus_remove_irq_work(MENELAUS_MMC_S1D1_IRQ); - menelaus_remove_irq_work(MENELAUS_MMC_S2D1_IRQ); - - the_menelaus->mmc_callback = NULL; - the_menelaus->mmc_callback_data = 0; -} -EXPORT_SYMBOL(menelaus_unregister_mmc_callback); - -struct menelaus_vtg { - const char *name; - u8 vtg_reg; - u8 vtg_shift; - u8 vtg_bits; - u8 mode_reg; -}; - -struct menelaus_vtg_value { - u16 vtg; - u16 val; -}; - -static int menelaus_set_voltage(const struct menelaus_vtg *vtg, int mV, - int vtg_val, int mode) -{ - int val, ret; - struct i2c_client *c = the_menelaus->client; - - mutex_lock(&the_menelaus->lock); - if (vtg == 0) - goto set_voltage; - - ret = menelaus_read_reg(vtg->vtg_reg); - if (ret < 0) - goto out; - val = ret & ~(((1 << vtg->vtg_bits) - 1) << vtg->vtg_shift); - val |= vtg_val << vtg->vtg_shift; - - dev_dbg(&c->dev, "Setting voltage '%s'" - "to %d mV (reg 0x%02x, val 0x%02x)\n", - vtg->name, mV, vtg->vtg_reg, val); - - ret = menelaus_write_reg(vtg->vtg_reg, val); - if (ret < 0) - goto out; -set_voltage: - ret = menelaus_write_reg(vtg->mode_reg, mode); -out: - mutex_unlock(&the_menelaus->lock); - if (ret == 0) { - /* Wait for voltage to stabilize */ - msleep(1); - } - return ret; -} - -static int menelaus_get_vtg_value(int vtg, const struct menelaus_vtg_value *tbl, - int n) -{ - int i; - - for (i = 0; i < n; i++, tbl++) - if (tbl->vtg == vtg) - return tbl->val; - return -EINVAL; -} - -/* - * Vcore can be programmed in two ways: - * SW-controlled: Required voltage is programmed into VCORE_CTRL1 - * HW-controlled: Required range (roof-floor) is programmed into VCORE_CTRL3 - * and VCORE_CTRL4 - * - * Call correct 'set' function accordingly - */ - -static const struct menelaus_vtg_value vcore_values[] = { - { 1000, 0 }, - { 1025, 1 }, - { 1050, 2 }, - { 1075, 3 }, - { 1100, 4 }, - { 1125, 5 }, - { 1150, 6 }, - { 1175, 7 }, - { 1200, 8 }, - { 1225, 9 }, - { 1250, 10 }, - { 1275, 11 }, - { 1300, 12 }, - { 1325, 13 }, - { 1350, 14 }, - { 1375, 15 }, - { 1400, 16 }, - { 1425, 17 }, - { 1450, 18 }, -}; - -int menelaus_set_vcore_sw(unsigned int mV) -{ - int val, ret; - struct i2c_client *c = the_menelaus->client; - - val = menelaus_get_vtg_value(mV, vcore_values, - ARRAY_SIZE(vcore_values)); - if (val < 0) - return -EINVAL; - - dev_dbg(&c->dev, "Setting VCORE to %d mV (val 0x%02x)\n", mV, val); - - /* Set SW mode and the voltage in one go. */ - mutex_lock(&the_menelaus->lock); - ret = menelaus_write_reg(MENELAUS_VCORE_CTRL1, val); - if (ret == 0) - the_menelaus->vcore_hw_mode = 0; - mutex_unlock(&the_menelaus->lock); - msleep(1); - - return ret; -} - -int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV) -{ - int fval, rval, val, ret; - struct i2c_client *c = the_menelaus->client; - - rval = menelaus_get_vtg_value(roof_mV, vcore_values, - ARRAY_SIZE(vcore_values)); - if (rval < 0) - return -EINVAL; - fval = menelaus_get_vtg_value(floor_mV, vcore_values, - ARRAY_SIZE(vcore_values)); - if (fval < 0) - return -EINVAL; - - dev_dbg(&c->dev, "Setting VCORE FLOOR to %d mV and ROOF to %d mV\n", - floor_mV, roof_mV); - - mutex_lock(&the_menelaus->lock); - ret = menelaus_write_reg(MENELAUS_VCORE_CTRL3, fval); - if (ret < 0) - goto out; - ret = menelaus_write_reg(MENELAUS_VCORE_CTRL4, rval); - if (ret < 0) - goto out; - if (!the_menelaus->vcore_hw_mode) { - val = menelaus_read_reg(MENELAUS_VCORE_CTRL1); - /* HW mode, turn OFF byte comparator */ - val |= ((1 << 7) | (1 << 5)); - ret = menelaus_write_reg(MENELAUS_VCORE_CTRL1, val); - the_menelaus->vcore_hw_mode = 1; - } - msleep(1); -out: - mutex_unlock(&the_menelaus->lock); - return ret; -} - -static const struct menelaus_vtg vmem_vtg = { - .name = "VMEM", - .vtg_reg = MENELAUS_LDO_CTRL1, - .vtg_shift = 0, - .vtg_bits = 2, - .mode_reg = MENELAUS_LDO_CTRL3, -}; - -static const struct menelaus_vtg_value vmem_values[] = { - { 1500, 0 }, - { 1800, 1 }, - { 1900, 2 }, - { 2500, 3 }, -}; - -int menelaus_set_vmem(unsigned int mV) -{ - int val; - - if (mV == 0) - return menelaus_set_voltage(&vmem_vtg, 0, 0, 0); - - val = menelaus_get_vtg_value(mV, vmem_values, ARRAY_SIZE(vmem_values)); - if (val < 0) - return -EINVAL; - return menelaus_set_voltage(&vmem_vtg, mV, val, 0x02); -} -EXPORT_SYMBOL(menelaus_set_vmem); - -static const struct menelaus_vtg vio_vtg = { - .name = "VIO", - .vtg_reg = MENELAUS_LDO_CTRL1, - .vtg_shift = 2, - .vtg_bits = 2, - .mode_reg = MENELAUS_LDO_CTRL4, -}; - -static const struct menelaus_vtg_value vio_values[] = { - { 1500, 0 }, - { 1800, 1 }, - { 2500, 2 }, - { 2800, 3 }, -}; - -int menelaus_set_vio(unsigned int mV) -{ - int val; - - if (mV == 0) - return menelaus_set_voltage(&vio_vtg, 0, 0, 0); - - val = menelaus_get_vtg_value(mV, vio_values, ARRAY_SIZE(vio_values)); - if (val < 0) - return -EINVAL; - return menelaus_set_voltage(&vio_vtg, mV, val, 0x02); -} -EXPORT_SYMBOL(menelaus_set_vio); - -static const struct menelaus_vtg_value vdcdc_values[] = { - { 1500, 0 }, - { 1800, 1 }, - { 2000, 2 }, - { 2200, 3 }, - { 2400, 4 }, - { 2800, 5 }, - { 3000, 6 }, - { 3300, 7 }, -}; - -static const struct menelaus_vtg vdcdc2_vtg = { - .name = "VDCDC2", - .vtg_reg = MENELAUS_DCDC_CTRL1, - .vtg_shift = 0, - .vtg_bits = 3, - .mode_reg = MENELAUS_DCDC_CTRL2, -}; - -static const struct menelaus_vtg vdcdc3_vtg = { - .name = "VDCDC3", - .vtg_reg = MENELAUS_DCDC_CTRL1, - .vtg_shift = 3, - .vtg_bits = 3, - .mode_reg = MENELAUS_DCDC_CTRL3, -}; - -int menelaus_set_vdcdc(int dcdc, unsigned int mV) -{ - const struct menelaus_vtg *vtg; - int val; - - if (dcdc != 2 && dcdc != 3) - return -EINVAL; - if (dcdc == 2) - vtg = &vdcdc2_vtg; - else - vtg = &vdcdc3_vtg; - - if (mV == 0) - return menelaus_set_voltage(vtg, 0, 0, 0); - - val = menelaus_get_vtg_value(mV, vdcdc_values, - ARRAY_SIZE(vdcdc_values)); - if (val < 0) - return -EINVAL; - return menelaus_set_voltage(vtg, mV, val, 0x03); -} - -static const struct menelaus_vtg_value vmmc_values[] = { - { 1850, 0 }, - { 2800, 1 }, - { 3000, 2 }, - { 3100, 3 }, -}; - -static const struct menelaus_vtg vmmc_vtg = { - .name = "VMMC", - .vtg_reg = MENELAUS_LDO_CTRL1, - .vtg_shift = 6, - .vtg_bits = 2, - .mode_reg = MENELAUS_LDO_CTRL7, -}; - -int menelaus_set_vmmc(unsigned int mV) -{ - int val; - - if (mV == 0) - return menelaus_set_voltage(&vmmc_vtg, 0, 0, 0); - - val = menelaus_get_vtg_value(mV, vmmc_values, ARRAY_SIZE(vmmc_values)); - if (val < 0) - return -EINVAL; - return menelaus_set_voltage(&vmmc_vtg, mV, val, 0x02); -} -EXPORT_SYMBOL(menelaus_set_vmmc); - - -static const struct menelaus_vtg_value vaux_values[] = { - { 1500, 0 }, - { 1800, 1 }, - { 2500, 2 }, - { 2800, 3 }, -}; - -static const struct menelaus_vtg vaux_vtg = { - .name = "VAUX", - .vtg_reg = MENELAUS_LDO_CTRL1, - .vtg_shift = 4, - .vtg_bits = 2, - .mode_reg = MENELAUS_LDO_CTRL6, -}; - -int menelaus_set_vaux(unsigned int mV) -{ - int val; - - if (mV == 0) - return menelaus_set_voltage(&vaux_vtg, 0, 0, 0); - - val = menelaus_get_vtg_value(mV, vaux_values, ARRAY_SIZE(vaux_values)); - if (val < 0) - return -EINVAL; - return menelaus_set_voltage(&vaux_vtg, mV, val, 0x02); -} -EXPORT_SYMBOL(menelaus_set_vaux); - -int menelaus_get_slot_pin_states(void) -{ - return menelaus_read_reg(MENELAUS_MCT_PIN_ST); -} -EXPORT_SYMBOL(menelaus_get_slot_pin_states); - -int menelaus_set_regulator_sleep(int enable, u32 val) -{ - int t, ret; - struct i2c_client *c = the_menelaus->client; - - mutex_lock(&the_menelaus->lock); - ret = menelaus_write_reg(MENELAUS_SLEEP_CTRL2, val); - if (ret < 0) - goto out; - - dev_dbg(&c->dev, "regulator sleep configuration: %02x\n", val); - - ret = menelaus_read_reg(MENELAUS_GPIO_CTRL); - if (ret < 0) - goto out; - t = ((1 << 6) | 0x04); - if (enable) - ret |= t; - else - ret &= ~t; - ret = menelaus_write_reg(MENELAUS_GPIO_CTRL, ret); -out: - mutex_unlock(&the_menelaus->lock); - return ret; -} - -/*-----------------------------------------------------------------------*/ - -/* Handles Menelaus interrupts. Does not run in interrupt context */ -static void menelaus_work(struct work_struct *_menelaus) -{ - struct menelaus_chip *menelaus = - container_of(_menelaus, struct menelaus_chip, work); - void (*handler)(struct menelaus_chip *menelaus); - - while (1) { - unsigned isr; - - isr = (menelaus_read_reg(MENELAUS_INT_STATUS2) - & ~menelaus->mask2) << 8; - isr |= menelaus_read_reg(MENELAUS_INT_STATUS1) - & ~menelaus->mask1; - if (!isr) - break; - - while (isr) { - int irq = fls(isr) - 1; - isr &= ~(1 << irq); - - mutex_lock(&menelaus->lock); - menelaus_disable_irq(irq); - menelaus_ack_irq(irq); - handler = menelaus->handlers[irq]; - if (handler) - handler(menelaus); - menelaus_enable_irq(irq); - mutex_unlock(&menelaus->lock); - } - } - enable_irq(menelaus->client->irq); -} - -/* - * We cannot use I2C in interrupt context, so we just schedule work. - */ -static irqreturn_t menelaus_irq(int irq, void *_menelaus) -{ - struct menelaus_chip *menelaus = _menelaus; - - disable_irq_nosync(irq); - (void)schedule_work(&menelaus->work); - - return IRQ_HANDLED; -} - -/*-----------------------------------------------------------------------*/ - -/* - * The RTC needs to be set once, then it runs on backup battery power. - * It supports alarms, including system wake alarms (from some modes); - * and 1/second IRQs if requested. - */ -#ifdef CONFIG_RTC_DRV_TWL92330 - -#define RTC_CTRL_RTC_EN (1 << 0) -#define RTC_CTRL_AL_EN (1 << 1) -#define RTC_CTRL_MODE12 (1 << 2) -#define RTC_CTRL_EVERY_MASK (3 << 3) -#define RTC_CTRL_EVERY_SEC (0 << 3) -#define RTC_CTRL_EVERY_MIN (1 << 3) -#define RTC_CTRL_EVERY_HR (2 << 3) -#define RTC_CTRL_EVERY_DAY (3 << 3) - -#define RTC_UPDATE_EVERY 0x08 - -#define RTC_HR_PM (1 << 7) - -static void menelaus_to_time(char *regs, struct rtc_time *t) -{ - t->tm_sec = bcd2bin(regs[0]); - t->tm_min = bcd2bin(regs[1]); - if (the_menelaus->rtc_control & RTC_CTRL_MODE12) { - t->tm_hour = bcd2bin(regs[2] & 0x1f) - 1; - if (regs[2] & RTC_HR_PM) - t->tm_hour += 12; - } else - t->tm_hour = bcd2bin(regs[2] & 0x3f); - t->tm_mday = bcd2bin(regs[3]); - t->tm_mon = bcd2bin(regs[4]) - 1; - t->tm_year = bcd2bin(regs[5]) + 100; -} - -static int time_to_menelaus(struct rtc_time *t, int regnum) -{ - int hour, status; - - status = menelaus_write_reg(regnum++, bin2bcd(t->tm_sec)); - if (status < 0) - goto fail; - - status = menelaus_write_reg(regnum++, bin2bcd(t->tm_min)); - if (status < 0) - goto fail; - - if (the_menelaus->rtc_control & RTC_CTRL_MODE12) { - hour = t->tm_hour + 1; - if (hour > 12) - hour = RTC_HR_PM | bin2bcd(hour - 12); - else - hour = bin2bcd(hour); - } else - hour = bin2bcd(t->tm_hour); - status = menelaus_write_reg(regnum++, hour); - if (status < 0) - goto fail; - - status = menelaus_write_reg(regnum++, bin2bcd(t->tm_mday)); - if (status < 0) - goto fail; - - status = menelaus_write_reg(regnum++, bin2bcd(t->tm_mon + 1)); - if (status < 0) - goto fail; - - status = menelaus_write_reg(regnum++, bin2bcd(t->tm_year - 100)); - if (status < 0) - goto fail; - - return 0; -fail: - dev_err(&the_menelaus->client->dev, "rtc write reg %02x, err %d\n", - --regnum, status); - return status; -} - -static int menelaus_read_time(struct device *dev, struct rtc_time *t) -{ - struct i2c_msg msg[2]; - char regs[7]; - int status; - - /* block read date and time registers */ - regs[0] = MENELAUS_RTC_SEC; - - msg[0].addr = MENELAUS_I2C_ADDRESS; - msg[0].flags = 0; - msg[0].len = 1; - msg[0].buf = regs; - - msg[1].addr = MENELAUS_I2C_ADDRESS; - msg[1].flags = I2C_M_RD; - msg[1].len = sizeof(regs); - msg[1].buf = regs; - - status = i2c_transfer(the_menelaus->client->adapter, msg, 2); - if (status != 2) { - dev_err(dev, "%s error %d\n", "read", status); - return -EIO; - } - - menelaus_to_time(regs, t); - t->tm_wday = bcd2bin(regs[6]); - - return 0; -} - -static int menelaus_set_time(struct device *dev, struct rtc_time *t) -{ - int status; - - /* write date and time registers */ - status = time_to_menelaus(t, MENELAUS_RTC_SEC); - if (status < 0) - return status; - status = menelaus_write_reg(MENELAUS_RTC_WKDAY, bin2bcd(t->tm_wday)); - if (status < 0) { - dev_err(&the_menelaus->client->dev, "rtc write reg %02x " - "err %d\n", MENELAUS_RTC_WKDAY, status); - return status; - } - - /* now commit the write */ - status = menelaus_write_reg(MENELAUS_RTC_UPDATE, RTC_UPDATE_EVERY); - if (status < 0) - dev_err(&the_menelaus->client->dev, "rtc commit time, err %d\n", - status); - - return 0; -} - -static int menelaus_read_alarm(struct device *dev, struct rtc_wkalrm *w) -{ - struct i2c_msg msg[2]; - char regs[6]; - int status; - - /* block read alarm registers */ - regs[0] = MENELAUS_RTC_AL_SEC; - - msg[0].addr = MENELAUS_I2C_ADDRESS; - msg[0].flags = 0; - msg[0].len = 1; - msg[0].buf = regs; - - msg[1].addr = MENELAUS_I2C_ADDRESS; - msg[1].flags = I2C_M_RD; - msg[1].len = sizeof(regs); - msg[1].buf = regs; - - status = i2c_transfer(the_menelaus->client->adapter, msg, 2); - if (status != 2) { - dev_err(dev, "%s error %d\n", "alarm read", status); - return -EIO; - } - - menelaus_to_time(regs, &w->time); - - w->enabled = !!(the_menelaus->rtc_control & RTC_CTRL_AL_EN); - - /* NOTE we *could* check if actually pending... */ - w->pending = 0; - - return 0; -} - -static int menelaus_set_alarm(struct device *dev, struct rtc_wkalrm *w) -{ - int status; - - if (the_menelaus->client->irq <= 0 && w->enabled) - return -ENODEV; - - /* clear previous alarm enable */ - if (the_menelaus->rtc_control & RTC_CTRL_AL_EN) { - the_menelaus->rtc_control &= ~RTC_CTRL_AL_EN; - status = menelaus_write_reg(MENELAUS_RTC_CTRL, - the_menelaus->rtc_control); - if (status < 0) - return status; - } - - /* write alarm registers */ - status = time_to_menelaus(&w->time, MENELAUS_RTC_AL_SEC); - if (status < 0) - return status; - - /* enable alarm if requested */ - if (w->enabled) { - the_menelaus->rtc_control |= RTC_CTRL_AL_EN; - status = menelaus_write_reg(MENELAUS_RTC_CTRL, - the_menelaus->rtc_control); - } - - return status; -} - -#ifdef CONFIG_RTC_INTF_DEV - -static void menelaus_rtc_update_work(struct menelaus_chip *m) -{ - /* report 1/sec update */ - local_irq_disable(); - rtc_update_irq(m->rtc, 1, RTC_IRQF | RTC_UF); - local_irq_enable(); -} - -static int menelaus_ioctl(struct device *dev, unsigned cmd, unsigned long arg) -{ - int status; - - if (the_menelaus->client->irq <= 0) - return -ENOIOCTLCMD; - - switch (cmd) { - /* alarm IRQ */ - case RTC_AIE_ON: - if (the_menelaus->rtc_control & RTC_CTRL_AL_EN) - return 0; - the_menelaus->rtc_control |= RTC_CTRL_AL_EN; - break; - case RTC_AIE_OFF: - if (!(the_menelaus->rtc_control & RTC_CTRL_AL_EN)) - return 0; - the_menelaus->rtc_control &= ~RTC_CTRL_AL_EN; - break; - /* 1/second "update" IRQ */ - case RTC_UIE_ON: - if (the_menelaus->uie) - return 0; - status = menelaus_remove_irq_work(MENELAUS_RTCTMR_IRQ); - status = menelaus_add_irq_work(MENELAUS_RTCTMR_IRQ, - menelaus_rtc_update_work); - if (status == 0) - the_menelaus->uie = 1; - return status; - case RTC_UIE_OFF: - if (!the_menelaus->uie) - return 0; - status = menelaus_remove_irq_work(MENELAUS_RTCTMR_IRQ); - if (status == 0) - the_menelaus->uie = 0; - return status; - default: - return -ENOIOCTLCMD; - } - return menelaus_write_reg(MENELAUS_RTC_CTRL, the_menelaus->rtc_control); -} - -#else -#define menelaus_ioctl NULL -#endif - -/* REVISIT no compensation register support ... */ - -static const struct rtc_class_ops menelaus_rtc_ops = { - .ioctl = menelaus_ioctl, - .read_time = menelaus_read_time, - .set_time = menelaus_set_time, - .read_alarm = menelaus_read_alarm, - .set_alarm = menelaus_set_alarm, -}; - -static void menelaus_rtc_alarm_work(struct menelaus_chip *m) -{ - /* report alarm */ - local_irq_disable(); - rtc_update_irq(m->rtc, 1, RTC_IRQF | RTC_AF); - local_irq_enable(); - - /* then disable it; alarms are oneshot */ - the_menelaus->rtc_control &= ~RTC_CTRL_AL_EN; - menelaus_write_reg(MENELAUS_RTC_CTRL, the_menelaus->rtc_control); -} - -static inline void menelaus_rtc_init(struct menelaus_chip *m) -{ - int alarm = (m->client->irq > 0); - - /* assume 32KDETEN pin is pulled high */ - if (!(menelaus_read_reg(MENELAUS_OSC_CTRL) & 0x80)) { - dev_dbg(&m->client->dev, "no 32k oscillator\n"); - return; - } - - /* support RTC alarm; it can issue wakeups */ - if (alarm) { - if (menelaus_add_irq_work(MENELAUS_RTCALM_IRQ, - menelaus_rtc_alarm_work) < 0) { - dev_err(&m->client->dev, "can't handle RTC alarm\n"); - return; - } - device_init_wakeup(&m->client->dev, 1); - } - - /* be sure RTC is enabled; allow 1/sec irqs; leave 12hr mode alone */ - m->rtc_control = menelaus_read_reg(MENELAUS_RTC_CTRL); - if (!(m->rtc_control & RTC_CTRL_RTC_EN) - || (m->rtc_control & RTC_CTRL_AL_EN) - || (m->rtc_control & RTC_CTRL_EVERY_MASK)) { - if (!(m->rtc_control & RTC_CTRL_RTC_EN)) { - dev_warn(&m->client->dev, "rtc clock needs setting\n"); - m->rtc_control |= RTC_CTRL_RTC_EN; - } - m->rtc_control &= ~RTC_CTRL_EVERY_MASK; - m->rtc_control &= ~RTC_CTRL_AL_EN; - menelaus_write_reg(MENELAUS_RTC_CTRL, m->rtc_control); - } - - m->rtc = rtc_device_register(DRIVER_NAME, - &m->client->dev, - &menelaus_rtc_ops, THIS_MODULE); - if (IS_ERR(m->rtc)) { - if (alarm) { - menelaus_remove_irq_work(MENELAUS_RTCALM_IRQ); - device_init_wakeup(&m->client->dev, 0); - } - dev_err(&m->client->dev, "can't register RTC: %d\n", - (int) PTR_ERR(m->rtc)); - the_menelaus->rtc = NULL; - } -} - -#else - -static inline void menelaus_rtc_init(struct menelaus_chip *m) -{ - /* nothing */ -} - -#endif - -/*-----------------------------------------------------------------------*/ - -static struct i2c_driver menelaus_i2c_driver; - -static int menelaus_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - struct menelaus_chip *menelaus; - int rev = 0, val; - int err = 0; - struct menelaus_platform_data *menelaus_pdata = - client->dev.platform_data; - - if (the_menelaus) { - dev_dbg(&client->dev, "only one %s for now\n", - DRIVER_NAME); - return -ENODEV; - } - - menelaus = kzalloc(sizeof *menelaus, GFP_KERNEL); - if (!menelaus) - return -ENOMEM; - - i2c_set_clientdata(client, menelaus); - - the_menelaus = menelaus; - menelaus->client = client; - - /* If a true probe check the device */ - rev = menelaus_read_reg(MENELAUS_REV); - if (rev < 0) { - pr_err(DRIVER_NAME ": device not found"); - err = -ENODEV; - goto fail1; - } - - /* Ack and disable all Menelaus interrupts */ - menelaus_write_reg(MENELAUS_INT_ACK1, 0xff); - menelaus_write_reg(MENELAUS_INT_ACK2, 0xff); - menelaus_write_reg(MENELAUS_INT_MASK1, 0xff); - menelaus_write_reg(MENELAUS_INT_MASK2, 0xff); - menelaus->mask1 = 0xff; - menelaus->mask2 = 0xff; - - /* Set output buffer strengths */ - menelaus_write_reg(MENELAUS_MCT_CTRL1, 0x73); - - if (client->irq > 0) { - err = request_irq(client->irq, menelaus_irq, IRQF_DISABLED, - DRIVER_NAME, menelaus); - if (err) { - dev_dbg(&client->dev, "can't get IRQ %d, err %d\n", - client->irq, err); - goto fail1; - } - } - - mutex_init(&menelaus->lock); - INIT_WORK(&menelaus->work, menelaus_work); - - pr_info("Menelaus rev %d.%d\n", rev >> 4, rev & 0x0f); - - val = menelaus_read_reg(MENELAUS_VCORE_CTRL1); - if (val < 0) - goto fail2; - if (val & (1 << 7)) - menelaus->vcore_hw_mode = 1; - else - menelaus->vcore_hw_mode = 0; - - if (menelaus_pdata != NULL && menelaus_pdata->late_init != NULL) { - err = menelaus_pdata->late_init(&client->dev); - if (err < 0) - goto fail2; - } - - menelaus_rtc_init(menelaus); - - return 0; -fail2: - free_irq(client->irq, menelaus); - flush_scheduled_work(); -fail1: - kfree(menelaus); - return err; -} - -static int __exit menelaus_remove(struct i2c_client *client) -{ - struct menelaus_chip *menelaus = i2c_get_clientdata(client); - - free_irq(client->irq, menelaus); - kfree(menelaus); - i2c_set_clientdata(client, NULL); - the_menelaus = NULL; - return 0; -} - -static const struct i2c_device_id menelaus_id[] = { - { "menelaus", 0 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, menelaus_id); - -static struct i2c_driver menelaus_i2c_driver = { - .driver = { - .name = DRIVER_NAME, - }, - .probe = menelaus_probe, - .remove = __exit_p(menelaus_remove), - .id_table = menelaus_id, -}; - -static int __init menelaus_init(void) -{ - int res; - - res = i2c_add_driver(&menelaus_i2c_driver); - if (res < 0) { - pr_err(DRIVER_NAME ": driver registration failed\n"); - return res; - } - - return 0; -} - -static void __exit menelaus_exit(void) -{ - i2c_del_driver(&menelaus_i2c_driver); - - /* FIXME: Shutdown menelaus parts that can be shut down */ -} - -MODULE_AUTHOR("Texas Instruments, Inc. (and others)"); -MODULE_DESCRIPTION("I2C interface for Menelaus."); -MODULE_LICENSE("GPL"); - -module_init(menelaus_init); -module_exit(menelaus_exit); -- cgit v1.2.3