From 9ded96f24c3a5fcbef954e88c443385a1af37eb9 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 8 Jan 2006 01:02:07 -0800 Subject: [PATCH] IRQ type flags Some ARM platforms have the ability to program the interrupt controller to detect various interrupt edges and/or levels. For some platforms, this is critical to setup correctly, particularly those which the setting is dependent on the device. Currently, ARM drivers do (eg) the following: err = request_irq(irq, ...); set_irq_type(irq, IRQT_RISING); However, if the interrupt has previously been programmed to be level sensitive (for whatever reason) then this will cause an interrupt storm. Hence, if we combine set_irq_type() with request_irq(), we can then safely set the type prior to unmasking the interrupt. The unfortunate problem is that in order to support this, these flags need to be visible outside of the ARM architecture - drivers such as smc91x need these flags and they're cross-architecture. Finally, the SA_TRIGGER_* flag passed to request_irq() should reflect the property that the device would like. The IRQ controller code should do its best to select the most appropriate supported mode. Signed-off-by: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/i2c/chips/tps65010.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c index e70b3db69ed..1af3dfbb808 100644 --- a/drivers/i2c/chips/tps65010.c +++ b/drivers/i2c/chips/tps65010.c @@ -494,6 +494,7 @@ tps65010_probe(struct i2c_adapter *bus, int address, int kind) { struct tps65010 *tps; int status; + unsigned long irqflags; if (the_tps) { dev_dbg(&bus->dev, "only one %s for now\n", DRIVER_NAME); @@ -520,13 +521,14 @@ tps65010_probe(struct i2c_adapter *bus, int address, int kind) } #ifdef CONFIG_ARM + irqflags = SA_SAMPLE_RANDOM | SA_TRIGGER_LOW; if (machine_is_omap_h2()) { tps->model = TPS65010; omap_cfg_reg(W4_GPIO58); tps->irq = OMAP_GPIO_IRQ(58); omap_request_gpio(58); omap_set_gpio_direction(58, 1); - set_irq_type(tps->irq, IRQT_FALLING); + irqflags |= SA_TRIGGER_FALLING; } if (machine_is_omap_osk()) { tps->model = TPS65010; @@ -534,7 +536,7 @@ tps65010_probe(struct i2c_adapter *bus, int address, int kind) tps->irq = OMAP_GPIO_IRQ(OMAP_MPUIO(1)); omap_request_gpio(OMAP_MPUIO(1)); omap_set_gpio_direction(OMAP_MPUIO(1), 1); - set_irq_type(tps->irq, IRQT_FALLING); + irqflags |= SA_TRIGGER_FALLING; } if (machine_is_omap_h3()) { tps->model = TPS65013; @@ -542,13 +544,12 @@ tps65010_probe(struct i2c_adapter *bus, int address, int kind) // FIXME set up this board's IRQ ... } #else -#define set_irq_type(num,trigger) do{}while(0) + irqflags = SA_SAMPLE_RANDOM; #endif if (tps->irq > 0) { - set_irq_type(tps->irq, IRQT_LOW); status = request_irq(tps->irq, tps65010_irq, - SA_SAMPLE_RANDOM, DRIVER_NAME, tps); + irqflags, DRIVER_NAME, tps); if (status < 0) { dev_dbg(&tps->client.dev, "can't get IRQ %d, err %d\n", tps->irq, status); -- cgit v1.2.3