From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/ide/arm/Makefile | 6 + drivers/ide/arm/bast-ide.c | 71 ++++ drivers/ide/arm/icside.c | 870 +++++++++++++++++++++++++++++++++++++++++++++ drivers/ide/arm/ide_arm.c | 43 +++ drivers/ide/arm/rapide.c | 125 +++++++ 5 files changed, 1115 insertions(+) create mode 100644 drivers/ide/arm/Makefile create mode 100644 drivers/ide/arm/bast-ide.c create mode 100644 drivers/ide/arm/icside.c create mode 100644 drivers/ide/arm/ide_arm.c create mode 100644 drivers/ide/arm/rapide.c (limited to 'drivers/ide/arm') diff --git a/drivers/ide/arm/Makefile b/drivers/ide/arm/Makefile new file mode 100644 index 00000000000..6a78f0755f2 --- /dev/null +++ b/drivers/ide/arm/Makefile @@ -0,0 +1,6 @@ + +obj-$(CONFIG_BLK_DEV_IDE_ICSIDE) += icside.o +obj-$(CONFIG_BLK_DEV_IDE_RAPIDE) += rapide.o +obj-$(CONFIG_BLK_DEV_IDE_BAST) += bast-ide.o + +EXTRA_CFLAGS := -Idrivers/ide diff --git a/drivers/ide/arm/bast-ide.c b/drivers/ide/arm/bast-ide.c new file mode 100644 index 00000000000..9d474e5fd8d --- /dev/null +++ b/drivers/ide/arm/bast-ide.c @@ -0,0 +1,71 @@ +/* linux/drivers/ide/arm/bast-ide.c + * + * Copyright (c) 2003-2004 Simtec Electronics + * Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#include +#include +#include +#include + +#include + +#include +#include +#include +#include +#include + +/* list of registered interfaces */ +static ide_hwif_t *ifs[2]; + +static int __init +bastide_register(unsigned int base, unsigned int aux, int irq, + ide_hwif_t **hwif) +{ + hw_regs_t hw; + int i; + + memset(&hw, 0, sizeof(hw)); + + base += BAST_IDE_CS; + aux += BAST_IDE_CS; + + for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) { + hw.io_ports[i] = (unsigned long)base; + base += 0x20; + } + + hw.io_ports[IDE_CONTROL_OFFSET] = aux + (6 * 0x20); + hw.irq = irq; + + ide_register_hw(&hw, hwif); + + return 0; +} + +static int __init bastide_init(void) +{ + /* we can treat the VR1000 and the BAST the same */ + + if (!(machine_is_bast() || machine_is_vr1000())) + return 0; + + printk("BAST: IDE driver, (c) 2003-2004 Simtec Electronics\n"); + + bastide_register(BAST_VA_IDEPRI, BAST_VA_IDEPRIAUX, IRQ_IDE0, &ifs[0]); + bastide_register(BAST_VA_IDESEC, BAST_VA_IDESECAUX, IRQ_IDE1, &ifs[1]); + return 0; +} + +module_init(bastide_init); + +MODULE_AUTHOR("Ben Dooks "); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Simtec BAST / Thorcom VR1000 IDE driver"); diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c new file mode 100644 index 00000000000..308897e57e4 --- /dev/null +++ b/drivers/ide/arm/icside.c @@ -0,0 +1,870 @@ +/* + * linux/drivers/ide/arm/icside.c + * + * Copyright (c) 1996-2004 Russell King. + * + * Please note that this platform does not support 32-bit IDE IO. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define ICS_IDENT_OFFSET 0x2280 + +#define ICS_ARCIN_V5_INTRSTAT 0x0000 +#define ICS_ARCIN_V5_INTROFFSET 0x0004 +#define ICS_ARCIN_V5_IDEOFFSET 0x2800 +#define ICS_ARCIN_V5_IDEALTOFFSET 0x2b80 +#define ICS_ARCIN_V5_IDESTEPPING 6 + +#define ICS_ARCIN_V6_IDEOFFSET_1 0x2000 +#define ICS_ARCIN_V6_INTROFFSET_1 0x2200 +#define ICS_ARCIN_V6_INTRSTAT_1 0x2290 +#define ICS_ARCIN_V6_IDEALTOFFSET_1 0x2380 +#define ICS_ARCIN_V6_IDEOFFSET_2 0x3000 +#define ICS_ARCIN_V6_INTROFFSET_2 0x3200 +#define ICS_ARCIN_V6_INTRSTAT_2 0x3290 +#define ICS_ARCIN_V6_IDEALTOFFSET_2 0x3380 +#define ICS_ARCIN_V6_IDESTEPPING 6 + +struct cardinfo { + unsigned int dataoffset; + unsigned int ctrloffset; + unsigned int stepping; +}; + +static struct cardinfo icside_cardinfo_v5 = { + .dataoffset = ICS_ARCIN_V5_IDEOFFSET, + .ctrloffset = ICS_ARCIN_V5_IDEALTOFFSET, + .stepping = ICS_ARCIN_V5_IDESTEPPING, +}; + +static struct cardinfo icside_cardinfo_v6_1 = { + .dataoffset = ICS_ARCIN_V6_IDEOFFSET_1, + .ctrloffset = ICS_ARCIN_V6_IDEALTOFFSET_1, + .stepping = ICS_ARCIN_V6_IDESTEPPING, +}; + +static struct cardinfo icside_cardinfo_v6_2 = { + .dataoffset = ICS_ARCIN_V6_IDEOFFSET_2, + .ctrloffset = ICS_ARCIN_V6_IDEALTOFFSET_2, + .stepping = ICS_ARCIN_V6_IDESTEPPING, +}; + +struct icside_state { + unsigned int channel; + unsigned int enabled; + void __iomem *irq_port; + void __iomem *ioc_base; + unsigned int type; + /* parent device... until the IDE core gets one of its own */ + struct device *dev; + ide_hwif_t *hwif[2]; +}; + +#define ICS_TYPE_A3IN 0 +#define ICS_TYPE_A3USER 1 +#define ICS_TYPE_V6 3 +#define ICS_TYPE_V5 15 +#define ICS_TYPE_NOTYPE ((unsigned int)-1) + +/* ---------------- Version 5 PCB Support Functions --------------------- */ +/* Prototype: icside_irqenable_arcin_v5 (struct expansion_card *ec, int irqnr) + * Purpose : enable interrupts from card + */ +static void icside_irqenable_arcin_v5 (struct expansion_card *ec, int irqnr) +{ + struct icside_state *state = ec->irq_data; + + writeb(0, state->irq_port + ICS_ARCIN_V5_INTROFFSET); +} + +/* Prototype: icside_irqdisable_arcin_v5 (struct expansion_card *ec, int irqnr) + * Purpose : disable interrupts from card + */ +static void icside_irqdisable_arcin_v5 (struct expansion_card *ec, int irqnr) +{ + struct icside_state *state = ec->irq_data; + + readb(state->irq_port + ICS_ARCIN_V5_INTROFFSET); +} + +static const expansioncard_ops_t icside_ops_arcin_v5 = { + .irqenable = icside_irqenable_arcin_v5, + .irqdisable = icside_irqdisable_arcin_v5, +}; + + +/* ---------------- Version 6 PCB Support Functions --------------------- */ +/* Prototype: icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr) + * Purpose : enable interrupts from card + */ +static void icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr) +{ + struct icside_state *state = ec->irq_data; + void __iomem *base = state->irq_port; + + state->enabled = 1; + + switch (state->channel) { + case 0: + writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1); + readb(base + ICS_ARCIN_V6_INTROFFSET_2); + break; + case 1: + writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2); + readb(base + ICS_ARCIN_V6_INTROFFSET_1); + break; + } +} + +/* Prototype: icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr) + * Purpose : disable interrupts from card + */ +static void icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr) +{ + struct icside_state *state = ec->irq_data; + + state->enabled = 0; + + readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1); + readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2); +} + +/* Prototype: icside_irqprobe(struct expansion_card *ec) + * Purpose : detect an active interrupt from card + */ +static int icside_irqpending_arcin_v6(struct expansion_card *ec) +{ + struct icside_state *state = ec->irq_data; + + return readb(state->irq_port + ICS_ARCIN_V6_INTRSTAT_1) & 1 || + readb(state->irq_port + ICS_ARCIN_V6_INTRSTAT_2) & 1; +} + +static const expansioncard_ops_t icside_ops_arcin_v6 = { + .irqenable = icside_irqenable_arcin_v6, + .irqdisable = icside_irqdisable_arcin_v6, + .irqpending = icside_irqpending_arcin_v6, +}; + +/* + * Handle routing of interrupts. This is called before + * we write the command to the drive. + */ +static void icside_maskproc(ide_drive_t *drive, int mask) +{ + ide_hwif_t *hwif = HWIF(drive); + struct icside_state *state = hwif->hwif_data; + unsigned long flags; + + local_irq_save(flags); + + state->channel = hwif->channel; + + if (state->enabled && !mask) { + switch (hwif->channel) { + case 0: + writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_1); + readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2); + break; + case 1: + writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_2); + readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1); + break; + } + } else { + readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2); + readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1); + } + + local_irq_restore(flags); +} + +#ifdef CONFIG_BLK_DEV_IDEDMA_ICS + +#ifndef CONFIG_IDEDMA_ICS_AUTO +#warning CONFIG_IDEDMA_ICS_AUTO=n support is obsolete, and will be removed soon. +#endif + +/* + * SG-DMA support. + * + * Similar to the BM-DMA, but we use the RiscPCs IOMD DMA controllers. + * There is only one DMA controller per card, which means that only + * one drive can be accessed at one time. NOTE! We do not enforce that + * here, but we rely on the main IDE driver spotting that both + * interfaces use the same IRQ, which should guarantee this. + */ + +static void icside_build_sglist(ide_drive_t *drive, struct request *rq) +{ + ide_hwif_t *hwif = drive->hwif; + struct icside_state *state = hwif->hwif_data; + struct scatterlist *sg = hwif->sg_table; + + ide_map_sg(drive, rq); + + if (rq_data_dir(rq) == READ) + hwif->sg_dma_direction = DMA_FROM_DEVICE; + else + hwif->sg_dma_direction = DMA_TO_DEVICE; + + hwif->sg_nents = dma_map_sg(state->dev, sg, hwif->sg_nents, + hwif->sg_dma_direction); +} + +/* + * Configure the IOMD to give the appropriate timings for the transfer + * mode being requested. We take the advice of the ATA standards, and + * calculate the cycle time based on the transfer mode, and the EIDE + * MW DMA specs that the drive provides in the IDENTIFY command. + * + * We have the following IOMD DMA modes to choose from: + * + * Type Active Recovery Cycle + * A 250 (250) 312 (550) 562 (800) + * B 187 250 437 + * C 125 (125) 125 (375) 250 (500) + * D 62 125 187 + * + * (figures in brackets are actual measured timings) + * + * However, we also need to take care of the read/write active and + * recovery timings: + * + * Read Write + * Mode Active -- Recovery -- Cycle IOMD type + * MW0 215 50 215 480 A + * MW1 80 50 50 150 C + * MW2 70 25 25 120 C + */ +static int icside_set_speed(ide_drive_t *drive, u8 xfer_mode) +{ + int on = 0, cycle_time = 0, use_dma_info = 0; + + /* + * Limit the transfer speed to MW_DMA_2. + */ + if (xfer_mode > XFER_MW_DMA_2) + xfer_mode = XFER_MW_DMA_2; + + switch (xfer_mode) { + case XFER_MW_DMA_2: + cycle_time = 250; + use_dma_info = 1; + break; + + case XFER_MW_DMA_1: + cycle_time = 250; + use_dma_info = 1; + break; + + case XFER_MW_DMA_0: + cycle_time = 480; + break; + + case XFER_SW_DMA_2: + case XFER_SW_DMA_1: + case XFER_SW_DMA_0: + cycle_time = 480; + break; + } + + /* + * If we're going to be doing MW_DMA_1 or MW_DMA_2, we should + * take care to note the values in the ID... + */ + if (use_dma_info && drive->id->eide_dma_time > cycle_time) + cycle_time = drive->id->eide_dma_time; + + drive->drive_data = cycle_time; + + if (cycle_time && ide_config_drive_speed(drive, xfer_mode) == 0) + on = 1; + else + drive->drive_data = 480; + + printk("%s: %s selected (peak %dMB/s)\n", drive->name, + ide_xfer_verbose(xfer_mode), 2000 / drive->drive_data); + + drive->current_speed = xfer_mode; + + return on; +} + +static int icside_dma_host_off(ide_drive_t *drive) +{ + return 0; +} + +static int icside_dma_off_quietly(ide_drive_t *drive) +{ + drive->using_dma = 0; + return icside_dma_host_off(drive); +} + +static int icside_dma_host_on(ide_drive_t *drive) +{ + return 0; +} + +static int icside_dma_on(ide_drive_t *drive) +{ + drive->using_dma = 1; + return icside_dma_host_on(drive); +} + +static int icside_dma_check(ide_drive_t *drive) +{ + struct hd_driveid *id = drive->id; + ide_hwif_t *hwif = HWIF(drive); + int xfer_mode = XFER_PIO_2; + int on; + + if (!(id->capability & 1) || !hwif->autodma) + goto out; + + /* + * Consult the list of known "bad" drives + */ + if (__ide_dma_bad_drive(drive)) + goto out; + + /* + * Enable DMA on any drive that has multiword DMA + */ + if (id->field_valid & 2) { + xfer_mode = ide_dma_speed(drive, 0); + goto out; + } + + /* + * Consult the list of known "good" drives + */ + if (__ide_dma_good_drive(drive)) { + if (id->eide_dma_time > 150) + goto out; + xfer_mode = XFER_MW_DMA_1; + } + +out: + on = icside_set_speed(drive, xfer_mode); + + if (on) + return icside_dma_on(drive); + else + return icside_dma_off_quietly(drive); +} + +static int icside_dma_end(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct icside_state *state = hwif->hwif_data; + + drive->waiting_for_dma = 0; + + disable_dma(hwif->hw.dma); + + /* Teardown mappings after DMA has completed. */ + dma_unmap_sg(state->dev, hwif->sg_table, hwif->sg_nents, + hwif->sg_dma_direction); + + return get_dma_residue(hwif->hw.dma) != 0; +} + +static void icside_dma_start(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + + /* We can not enable DMA on both channels simultaneously. */ + BUG_ON(dma_channel_active(hwif->hw.dma)); + enable_dma(hwif->hw.dma); +} + +static int icside_dma_setup(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct request *rq = hwif->hwgroup->rq; + unsigned int dma_mode; + + if (rq_data_dir(rq)) + dma_mode = DMA_MODE_WRITE; + else + dma_mode = DMA_MODE_READ; + + /* + * We can not enable DMA on both channels. + */ + BUG_ON(dma_channel_active(hwif->hw.dma)); + + icside_build_sglist(drive, rq); + + /* + * Ensure that we have the right interrupt routed. + */ + icside_maskproc(drive, 0); + + /* + * Route the DMA signals to the correct interface. + */ + writeb(hwif->select_data, hwif->config_data); + + /* + * Select the correct timing for this drive. + */ + set_dma_speed(hwif->hw.dma, drive->drive_data); + + /* + * Tell the DMA engine about the SG table and + * data direction. + */ + set_dma_sg(hwif->hw.dma, hwif->sg_table, hwif->sg_nents); + set_dma_mode(hwif->hw.dma, dma_mode); + + drive->waiting_for_dma = 1; + + return 0; +} + +static void icside_dma_exec_cmd(ide_drive_t *drive, u8 cmd) +{ + /* issue cmd to drive */ + ide_execute_command(drive, cmd, ide_dma_intr, 2 * WAIT_CMD, NULL); +} + +static int icside_dma_test_irq(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + struct icside_state *state = hwif->hwif_data; + + return readb(state->irq_port + + (hwif->channel ? + ICS_ARCIN_V6_INTRSTAT_2 : + ICS_ARCIN_V6_INTRSTAT_1)) & 1; +} + +static int icside_dma_timeout(ide_drive_t *drive) +{ + printk(KERN_ERR "%s: DMA timeout occurred: ", drive->name); + + if (icside_dma_test_irq(drive)) + return 0; + + ide_dump_status(drive, "DMA timeout", + HWIF(drive)->INB(IDE_STATUS_REG)); + + return icside_dma_end(drive); +} + +static int icside_dma_lostirq(ide_drive_t *drive) +{ + printk(KERN_ERR "%s: IRQ lost\n", drive->name); + return 1; +} + +static void icside_dma_init(ide_hwif_t *hwif) +{ + int autodma = 0; + +#ifdef CONFIG_IDEDMA_ICS_AUTO + autodma = 1; +#endif + + printk(" %s: SG-DMA", hwif->name); + + hwif->atapi_dma = 1; + hwif->mwdma_mask = 7; /* MW0..2 */ + hwif->swdma_mask = 7; /* SW0..2 */ + + hwif->dmatable_cpu = NULL; + hwif->dmatable_dma = 0; + hwif->speedproc = icside_set_speed; + hwif->autodma = autodma; + + hwif->ide_dma_check = icside_dma_check; + hwif->ide_dma_host_off = icside_dma_host_off; + hwif->ide_dma_off_quietly = icside_dma_off_quietly; + hwif->ide_dma_host_on = icside_dma_host_on; + hwif->ide_dma_on = icside_dma_on; + hwif->dma_setup = icside_dma_setup; + hwif->dma_exec_cmd = icside_dma_exec_cmd; + hwif->dma_start = icside_dma_start; + hwif->ide_dma_end = icside_dma_end; + hwif->ide_dma_test_irq = icside_dma_test_irq; + hwif->ide_dma_timeout = icside_dma_timeout; + hwif->ide_dma_lostirq = icside_dma_lostirq; + + hwif->drives[0].autodma = hwif->autodma; + hwif->drives[1].autodma = hwif->autodma; + + printk(" capable%s\n", hwif->autodma ? ", auto-enable" : ""); +} +#else +#define icside_dma_init(hwif) (0) +#endif + +static ide_hwif_t *icside_find_hwif(unsigned long dataport) +{ + ide_hwif_t *hwif; + int index; + + for (index = 0; index < MAX_HWIFS; ++index) { + hwif = &ide_hwifs[index]; + if (hwif->io_ports[IDE_DATA_OFFSET] == dataport) + goto found; + } + + for (index = 0; index < MAX_HWIFS; ++index) { + hwif = &ide_hwifs[index]; + if (!hwif->io_ports[IDE_DATA_OFFSET]) + goto found; + } + + hwif = NULL; +found: + return hwif; +} + +static ide_hwif_t * +icside_setup(void __iomem *base, struct cardinfo *info, struct expansion_card *ec) +{ + unsigned long port = (unsigned long)base + info->dataoffset; + ide_hwif_t *hwif; + + hwif = icside_find_hwif(port); + if (hwif) { + int i; + + memset(&hwif->hw, 0, sizeof(hw_regs_t)); + + /* + * Ensure we're using MMIO + */ + default_hwif_mmiops(hwif); + hwif->mmio = 2; + + for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) { + hwif->hw.io_ports[i] = port; + hwif->io_ports[i] = port; + port += 1 << info->stepping; + } + hwif->hw.io_ports[IDE_CONTROL_OFFSET] = (unsigned long)base + info->ctrloffset; + hwif->io_ports[IDE_CONTROL_OFFSET] = (unsigned long)base + info->ctrloffset; + hwif->hw.irq = ec->irq; + hwif->irq = ec->irq; + hwif->noprobe = 0; + hwif->chipset = ide_acorn; + hwif->gendev.parent = &ec->dev; + } + + return hwif; +} + +static int __init +icside_register_v5(struct icside_state *state, struct expansion_card *ec) +{ + ide_hwif_t *hwif; + void __iomem *base; + + base = ioremap(ecard_resource_start(ec, ECARD_RES_MEMC), + ecard_resource_len(ec, ECARD_RES_MEMC)); + if (!base) + return -ENOMEM; + + state->irq_port = base; + + ec->irqaddr = base + ICS_ARCIN_V5_INTRSTAT; + ec->irqmask = 1; + ec->irq_data = state; + ec->ops = &icside_ops_arcin_v5; + + /* + * Be on the safe side - disable interrupts + */ + icside_irqdisable_arcin_v5(ec, 0); + + hwif = icside_setup(base, &icside_cardinfo_v5, ec); + if (!hwif) { + iounmap(base); + return -ENODEV; + } + + state->hwif[0] = hwif; + + probe_hwif_init(hwif); + create_proc_ide_interfaces(); + + return 0; +} + +static int __init +icside_register_v6(struct icside_state *state, struct expansion_card *ec) +{ + ide_hwif_t *hwif, *mate; + void __iomem *ioc_base, *easi_base; + unsigned int sel = 0; + int ret; + + ioc_base = ioremap(ecard_resource_start(ec, ECARD_RES_IOCFAST), + ecard_resource_len(ec, ECARD_RES_IOCFAST)); + if (!ioc_base) { + ret = -ENOMEM; + goto out; + } + + easi_base = ioc_base; + + if (ecard_resource_flags(ec, ECARD_RES_EASI)) { + easi_base = ioremap(ecard_resource_start(ec, ECARD_RES_EASI), + ecard_resource_len(ec, ECARD_RES_EASI)); + if (!easi_base) { + ret = -ENOMEM; + goto unmap_slot; + } + + /* + * Enable access to the EASI region. + */ + sel = 1 << 5; + } + + writeb(sel, ioc_base); + + ec->irq_data = state; + ec->ops = &icside_ops_arcin_v6; + + state->irq_port = easi_base; + state->ioc_base = ioc_base; + + /* + * Be on the safe side - disable interrupts + */ + icside_irqdisable_arcin_v6(ec, 0); + + /* + * Find and register the interfaces. + */ + hwif = icside_setup(easi_base, &icside_cardinfo_v6_1, ec); + mate = icside_setup(easi_base, &icside_cardinfo_v6_2, ec); + + if (!hwif || !mate) { + ret = -ENODEV; + goto unmap_port; + } + + state->hwif[0] = hwif; + state->hwif[1] = mate; + + hwif->maskproc = icside_maskproc; + hwif->channel = 0; + hwif->hwif_data = state; + hwif->mate = mate; + hwif->serialized = 1; + hwif->config_data = (unsigned long)ioc_base; + hwif->select_data = sel; + hwif->hw.dma = ec->dma; + + mate->maskproc = icside_maskproc; + mate->channel = 1; + mate->hwif_data = state; + mate->mate = hwif; + mate->serialized = 1; + mate->config_data = (unsigned long)ioc_base; + mate->select_data = sel | 1; + mate->hw.dma = ec->dma; + + if (ec->dma != NO_DMA && !request_dma(ec->dma, hwif->name)) { + icside_dma_init(hwif); + icside_dma_init(mate); + } + + probe_hwif_init(hwif); + probe_hwif_init(mate); + create_proc_ide_interfaces(); + + return 0; + + unmap_port: + if (easi_base != ioc_base) + iounmap(easi_base); + unmap_slot: + iounmap(ioc_base); + out: + return ret; +} + +static int __devinit +icside_probe(struct expansion_card *ec, const struct ecard_id *id) +{ + struct icside_state *state; + void __iomem *idmem; + int ret; + + ret = ecard_request_resources(ec); + if (ret) + goto out; + + state = kmalloc(sizeof(struct icside_state), GFP_KERNEL); + if (!state) { + ret = -ENOMEM; + goto release; + } + + memset(state, 0, sizeof(state)); + state->type = ICS_TYPE_NOTYPE; + state->dev = &ec->dev; + + idmem = ioremap(ecard_resource_start(ec, ECARD_RES_IOCFAST), + ecard_resource_len(ec, ECARD_RES_IOCFAST)); + if (idmem) { + unsigned int type; + + type = readb(idmem + ICS_IDENT_OFFSET) & 1; + type |= (readb(idmem + ICS_IDENT_OFFSET + 4) & 1) << 1; + type |= (readb(idmem + ICS_IDENT_OFFSET + 8) & 1) << 2; + type |= (readb(idmem + ICS_IDENT_OFFSET + 12) & 1) << 3; + iounmap(idmem); + + state->type = type; + } + + switch (state->type) { + case ICS_TYPE_A3IN: + dev_warn(&ec->dev, "A3IN unsupported\n"); + ret = -ENODEV; + break; + + case ICS_TYPE_A3USER: + dev_warn(&ec->dev, "A3USER unsupported\n"); + ret = -ENODEV; + break; + + case ICS_TYPE_V5: + ret = icside_register_v5(state, ec); + break; + + case ICS_TYPE_V6: + ret = icside_register_v6(state, ec); + break; + + default: + dev_warn(&ec->dev, "unknown interface type\n"); + ret = -ENODEV; + break; + } + + if (ret == 0) { + ecard_set_drvdata(ec, state); + goto out; + } + + kfree(state); + release: + ecard_release_resources(ec); + out: + return ret; +} + +static void __devexit icside_remove(struct expansion_card *ec) +{ + struct icside_state *state = ecard_get_drvdata(ec); + + switch (state->type) { + case ICS_TYPE_V5: + /* FIXME: tell IDE to stop using the interface */ + + /* Disable interrupts */ + icside_irqdisable_arcin_v5(ec, 0); + break; + + case ICS_TYPE_V6: + /* FIXME: tell IDE to stop using the interface */ + if (ec->dma != NO_DMA) + free_dma(ec->dma); + + /* Disable interrupts */ + icside_irqdisable_arcin_v6(ec, 0); + + /* Reset the ROM pointer/EASI selection */ + writeb(0, state->ioc_base); + break; + } + + ecard_set_drvdata(ec, NULL); + ec->ops = NULL; + ec->irq_data = NULL; + + if (state->ioc_base) + iounmap(state->ioc_base); + if (state->ioc_base != state->irq_port) + iounmap(state->irq_port); + + kfree(state); + ecard_release_resources(ec); +} + +static void icside_shutdown(struct expansion_card *ec) +{ + struct icside_state *state = ecard_get_drvdata(ec); + unsigned long flags; + + /* + * Disable interrupts from this card. We need to do + * this before disabling EASI since we may be accessing + * this register via that region. + */ + local_irq_save(flags); + ec->ops->irqdisable(ec, 0); + local_irq_restore(flags); + + /* + * Reset the ROM pointer so that we can read the ROM + * after a soft reboot. This also disables access to + * the IDE taskfile via the EASI region. + */ + if (state->ioc_base) + writeb(0, state->ioc_base); +} + +static const struct ecard_id icside_ids[] = { + { MANU_ICS, PROD_ICS_IDE }, + { MANU_ICS2, PROD_ICS2_IDE }, + { 0xffff, 0xffff } +}; + +static struct ecard_driver icside_driver = { + .probe = icside_probe, + .remove = __devexit_p(icside_remove), + .shutdown = icside_shutdown, + .id_table = icside_ids, + .drv = { + .name = "icside", + }, +}; + +static int __init icside_init(void) +{ + return ecard_register_driver(&icside_driver); +} + +MODULE_AUTHOR("Russell King "); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("ICS IDE driver"); + +module_init(icside_init); diff --git a/drivers/ide/arm/ide_arm.c b/drivers/ide/arm/ide_arm.c new file mode 100644 index 00000000000..23488c4d1fc --- /dev/null +++ b/drivers/ide/arm/ide_arm.c @@ -0,0 +1,43 @@ +/* + * ARM/ARM26 default IDE host driver + * + * Copyright (C) 2004 Bartlomiej Zolnierkiewicz + * Based on code by: Russell King, Ian Molton and Alexander Schulz. + * + * May be copied or modified under the terms of the GNU General Public License. + */ + +#include +#include +#include + +#include +#include + +#ifdef CONFIG_ARM26 +# define IDE_ARM_HOST (machine_is_a5k()) +#else +# define IDE_ARM_HOST (1) +#endif + +#ifdef CONFIG_ARCH_CLPS7500 +# include +# +# define IDE_ARM_IO (ISASLOT_IO + 0x1f0) +# define IDE_ARM_IRQ IRQ_ISA_14 +#else +# define IDE_ARM_IO 0x1f0 +# define IDE_ARM_IRQ IRQ_HARDDISK +#endif + +void __init ide_arm_init(void) +{ + if (IDE_ARM_HOST) { + hw_regs_t hw; + + memset(&hw, 0, sizeof(hw)); + ide_std_init_ports(&hw, IDE_ARM_IO, IDE_ARM_IO + 0x206); + hw.irq = IDE_ARM_IRQ; + ide_register_hw(&hw, NULL); + } +} diff --git a/drivers/ide/arm/rapide.c b/drivers/ide/arm/rapide.c new file mode 100644 index 00000000000..3058217767d --- /dev/null +++ b/drivers/ide/arm/rapide.c @@ -0,0 +1,125 @@ +/* + * linux/drivers/ide/arm/rapide.c + * + * Copyright (c) 1996-2002 Russell King. + */ + +#include +#include +#include +#include +#include +#include + +#include + +/* + * Something like this really should be in generic code, but isn't. + */ +static ide_hwif_t * +rapide_locate_hwif(void __iomem *base, void __iomem *ctrl, unsigned int sz, int irq) +{ + unsigned long port = (unsigned long)base; + ide_hwif_t *hwif; + int index, i; + + for (index = 0; index < MAX_HWIFS; ++index) { + hwif = ide_hwifs + index; + if (hwif->io_ports[IDE_DATA_OFFSET] == port) + goto found; + } + + for (index = 0; index < MAX_HWIFS; ++index) { + hwif = ide_hwifs + index; + if (hwif->io_ports[IDE_DATA_OFFSET] == 0) + goto found; + } + + return NULL; + + found: + for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) { + hwif->hw.io_ports[i] = port; + hwif->io_ports[i] = port; + port += sz; + } + hwif->hw.io_ports[IDE_CONTROL_OFFSET] = (unsigned long)ctrl; + hwif->io_ports[IDE_CONTROL_OFFSET] = (unsigned long)ctrl; + hwif->hw.irq = hwif->irq = irq; + hwif->mmio = 2; + default_hwif_mmiops(hwif); + + return hwif; +} + +static int __devinit +rapide_probe(struct expansion_card *ec, const struct ecard_id *id) +{ + ide_hwif_t *hwif; + void __iomem *base; + int ret; + + ret = ecard_request_resources(ec); + if (ret) + goto out; + + base = ioremap(ecard_resource_start(ec, ECARD_RES_MEMC), + ecard_resource_len(ec, ECARD_RES_MEMC)); + if (!base) { + ret = -ENOMEM; + goto release; + } + + hwif = rapide_locate_hwif(base, base + 0x818, 1 << 6, ec->irq); + if (hwif) { + hwif->hwif_data = base; + hwif->gendev.parent = &ec->dev; + hwif->noprobe = 0; + probe_hwif_init(hwif); + create_proc_ide_interfaces(); + ecard_set_drvdata(ec, hwif); + goto out; + } + + iounmap(base); + release: + ecard_release_resources(ec); + out: + return ret; +} + +static void __devexit rapide_remove(struct expansion_card *ec) +{ + ide_hwif_t *hwif = ecard_get_drvdata(ec); + + ecard_set_drvdata(ec, NULL); + + /* there must be a better way */ + ide_unregister(hwif - ide_hwifs); + iounmap(hwif->hwif_data); + ecard_release_resources(ec); +} + +static struct ecard_id rapide_ids[] = { + { MANU_YELLOWSTONE, PROD_YELLOWSTONE_RAPIDE32 }, + { 0xffff, 0xffff } +}; + +static struct ecard_driver rapide_driver = { + .probe = rapide_probe, + .remove = __devexit_p(rapide_remove), + .id_table = rapide_ids, + .drv = { + .name = "rapide", + }, +}; + +static int __init rapide_init(void) +{ + return ecard_register_driver(&rapide_driver); +} + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Yellowstone RAPIDE driver"); + +module_init(rapide_init); -- cgit v1.2.3