From 1971b9d56fce9d8903e623b953c5e2fffe3a878e Mon Sep 17 00:00:00 2001 From: Ville Syrjala Date: Thu, 3 Jul 2008 10:45:37 -0400 Subject: Input: ati_remote2 - add loadable keymap support Support for loadable keymaps. The driver now supports individual keymaps for each of the five modes (AUX1-AUX4 and PC) of the remote. To achieve this the keymap scancode is interpreted as a combination of the mode and actual button scancode. The original keycode patches were done by Peter Stokes but I modified it quite a lot. Signed-off-by: Ville Syrjala Signed-off-by: Dmitry Torokhov --- drivers/input/misc/ati_remote2.c | 130 ++++++++++++++++++++++++++++++--------- 1 file changed, 101 insertions(+), 29 deletions(-) (limited to 'drivers/input/misc') diff --git a/drivers/input/misc/ati_remote2.c b/drivers/input/misc/ati_remote2.c index a7fabafbd94..f4918b9bb94 100644 --- a/drivers/input/misc/ati_remote2.c +++ b/drivers/input/misc/ati_remote2.c @@ -1,8 +1,8 @@ /* * ati_remote2 - ATI/Philips USB RF remote driver * - * Copyright (C) 2005 Ville Syrjala - * Copyright (C) 2007 Peter Stokes + * Copyright (C) 2005-2008 Ville Syrjala + * Copyright (C) 2007-2008 Peter Stokes * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 @@ -12,7 +12,7 @@ #include #define DRIVER_DESC "ATI/Philips USB RF remote driver" -#define DRIVER_VERSION "0.2" +#define DRIVER_VERSION "0.3" MODULE_DESCRIPTION(DRIVER_DESC); MODULE_VERSION(DRIVER_VERSION); @@ -27,7 +27,7 @@ MODULE_LICENSE("GPL"); * A remote's "channel" may be altered by pressing and holding the "PC" button for * approximately 3 seconds, after which the button will slowly flash the count of the * currently configured "channel", using the numeric keypad enter a number between 1 and - * 16 and then the "PC" button again, the button will slowly flash the count of the + * 16 and then press the "PC" button again, the button will slowly flash the count of the * newly configured "channel". */ @@ -45,9 +45,18 @@ static struct usb_device_id ati_remote2_id_table[] = { }; MODULE_DEVICE_TABLE(usb, ati_remote2_id_table); -static struct { - int hw_code; - int key_code; +enum { + ATI_REMOTE2_AUX1, + ATI_REMOTE2_AUX2, + ATI_REMOTE2_AUX3, + ATI_REMOTE2_AUX4, + ATI_REMOTE2_PC, + ATI_REMOTE2_MODES, +}; + +static const struct { + u8 hw_code; + u16 keycode; } ati_remote2_key_table[] = { { 0x00, KEY_0 }, { 0x01, KEY_1 }, @@ -73,6 +82,7 @@ static struct { { 0x37, KEY_RECORD }, { 0x38, KEY_DVD }, { 0x39, KEY_TV }, + { 0x3f, KEY_PROG1 }, /* AUX1-AUX4 and PC */ { 0x54, KEY_MENU }, { 0x58, KEY_UP }, { 0x59, KEY_DOWN }, @@ -91,15 +101,9 @@ static struct { { 0xa9, BTN_LEFT }, { 0xaa, BTN_RIGHT }, { 0xbe, KEY_QUESTION }, - { 0xd5, KEY_FRONT }, { 0xd0, KEY_EDIT }, + { 0xd5, KEY_FRONT }, { 0xf9, KEY_INFO }, - { (0x00 << 8) | 0x3f, KEY_PROG1 }, - { (0x01 << 8) | 0x3f, KEY_PROG2 }, - { (0x02 << 8) | 0x3f, KEY_PROG3 }, - { (0x03 << 8) | 0x3f, KEY_PROG4 }, - { (0x04 << 8) | 0x3f, KEY_PC }, - { 0, KEY_RESERVED } }; struct ati_remote2 { @@ -117,6 +121,9 @@ struct ati_remote2 { char name[64]; char phys[64]; + + /* Each mode (AUX1-AUX4 and PC) can have an independent keymap. */ + u16 keycode[ATI_REMOTE2_MODES][ARRAY_SIZE(ati_remote2_key_table)]; }; static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id); @@ -172,7 +179,7 @@ static void ati_remote2_input_mouse(struct ati_remote2 *ar2) mode = data[0] & 0x0F; - if (mode > 4) { + if (mode > ATI_REMOTE2_PC) { dev_err(&ar2->intf[0]->dev, "Unknown mode byte (%02x %02x %02x %02x)\n", data[3], data[2], data[1], data[0]); @@ -191,7 +198,7 @@ static int ati_remote2_lookup(unsigned int hw_code) { int i; - for (i = 0; ati_remote2_key_table[i].key_code != KEY_RESERVED; i++) + for (i = 0; i < ARRAY_SIZE(ati_remote2_key_table); i++) if (ati_remote2_key_table[i].hw_code == hw_code) return i; @@ -211,7 +218,7 @@ static void ati_remote2_input_key(struct ati_remote2 *ar2) mode = data[0] & 0x0F; - if (mode > 4) { + if (mode > ATI_REMOTE2_PC) { dev_err(&ar2->intf[1]->dev, "Unknown mode byte (%02x %02x %02x %02x)\n", data[3], data[2], data[1], data[0]); @@ -219,10 +226,6 @@ static void ati_remote2_input_key(struct ati_remote2 *ar2) } hw_code = data[2]; - /* - * Mode keys (AUX1-AUX4, PC) all generate the same code byte. - * Use the mode byte to figure out which one was pressed. - */ if (hw_code == 0x3f) { /* * For some incomprehensible reason the mouse pad generates @@ -236,8 +239,6 @@ static void ati_remote2_input_key(struct ati_remote2 *ar2) if (data[1] == 0) ar2->mode = mode; - - hw_code |= mode << 8; } if (!((1 << mode) & mode_mask)) @@ -260,8 +261,8 @@ static void ati_remote2_input_key(struct ati_remote2 *ar2) case 2: /* repeat */ /* No repeat for mouse buttons. */ - if (ati_remote2_key_table[index].key_code == BTN_LEFT || - ati_remote2_key_table[index].key_code == BTN_RIGHT) + if (ar2->keycode[mode][index] == BTN_LEFT || + ar2->keycode[mode][index] == BTN_RIGHT) return; if (!time_after_eq(jiffies, ar2->jiffies)) @@ -276,7 +277,7 @@ static void ati_remote2_input_key(struct ati_remote2 *ar2) return; } - input_event(idev, EV_KEY, ati_remote2_key_table[index].key_code, data[1]); + input_event(idev, EV_KEY, ar2->keycode[mode][index], data[1]); input_sync(idev); } @@ -334,10 +335,60 @@ static void ati_remote2_complete_key(struct urb *urb) "%s(): usb_submit_urb() = %d\n", __func__, r); } +static int ati_remote2_getkeycode(struct input_dev *idev, + int scancode, int *keycode) +{ + struct ati_remote2 *ar2 = input_get_drvdata(idev); + int index, mode; + + mode = scancode >> 8; + if (mode > ATI_REMOTE2_PC || !((1 << mode) & mode_mask)) + return -EINVAL; + + index = ati_remote2_lookup(scancode & 0xFF); + if (index < 0) + return -EINVAL; + + *keycode = ar2->keycode[mode][index]; + return 0; +} + +static int ati_remote2_setkeycode(struct input_dev *idev, int scancode, int keycode) +{ + struct ati_remote2 *ar2 = input_get_drvdata(idev); + int index, mode, old_keycode; + + mode = scancode >> 8; + if (mode > ATI_REMOTE2_PC || !((1 << mode) & mode_mask)) + return -EINVAL; + + index = ati_remote2_lookup(scancode & 0xFF); + if (index < 0) + return -EINVAL; + + if (keycode < KEY_RESERVED || keycode > KEY_MAX) + return -EINVAL; + + old_keycode = ar2->keycode[mode][index]; + ar2->keycode[mode][index] = keycode; + set_bit(keycode, idev->keybit); + + for (mode = 0; mode < ATI_REMOTE2_MODES; mode++) { + for (index = 0; index < ARRAY_SIZE(ati_remote2_key_table); index++) { + if (ar2->keycode[mode][index] == old_keycode) + return 0; + } + } + + clear_bit(old_keycode, idev->keybit); + + return 0; +} + static int ati_remote2_input_init(struct ati_remote2 *ar2) { struct input_dev *idev; - int i, retval; + int index, mode, retval; idev = input_allocate_device(); if (!idev) @@ -350,8 +401,26 @@ static int ati_remote2_input_init(struct ati_remote2 *ar2) idev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT); idev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y); - for (i = 0; ati_remote2_key_table[i].key_code != KEY_RESERVED; i++) - set_bit(ati_remote2_key_table[i].key_code, idev->keybit); + + for (mode = 0; mode < ATI_REMOTE2_MODES; mode++) { + for (index = 0; index < ARRAY_SIZE(ati_remote2_key_table); index++) { + ar2->keycode[mode][index] = ati_remote2_key_table[index].keycode; + set_bit(ar2->keycode[mode][index], idev->keybit); + } + } + + /* AUX1-AUX4 and PC generate the same scancode. */ + index = ati_remote2_lookup(0x3f); + ar2->keycode[ATI_REMOTE2_AUX1][index] = KEY_PROG1; + ar2->keycode[ATI_REMOTE2_AUX2][index] = KEY_PROG2; + ar2->keycode[ATI_REMOTE2_AUX3][index] = KEY_PROG3; + ar2->keycode[ATI_REMOTE2_AUX4][index] = KEY_PROG4; + ar2->keycode[ATI_REMOTE2_PC][index] = KEY_PC; + set_bit(KEY_PROG1, idev->keybit); + set_bit(KEY_PROG2, idev->keybit); + set_bit(KEY_PROG3, idev->keybit); + set_bit(KEY_PROG4, idev->keybit); + set_bit(KEY_PC, idev->keybit); idev->rep[REP_DELAY] = 250; idev->rep[REP_PERIOD] = 33; @@ -359,6 +428,9 @@ static int ati_remote2_input_init(struct ati_remote2 *ar2) idev->open = ati_remote2_open; idev->close = ati_remote2_close; + idev->getkeycode = ati_remote2_getkeycode; + idev->setkeycode = ati_remote2_setkeycode; + idev->name = ar2->name; idev->phys = ar2->phys; -- cgit v1.2.3