From cf7776dc05b89885a7ec6beff8409d48b077a3ac Mon Sep 17 00:00:00 2001 From: Hansjoerg Lipp Date: Sun, 26 Mar 2006 01:38:34 -0800 Subject: [PATCH] isdn4linux: Siemens Gigaset drivers - direct USB connection And: Tilman Schmidt This patch adds the main source file of the connection-specific module "bas_gigaset", the hardware driver for Gigaset base stations connected directly to the computer via USB. It contains the code for handling probe/disconnect, AT command/response transmission, and call setup and termination. Signed-off-by: Hansjoerg Lipp Signed-off-by: Tilman Schmidt Cc: Karsten Keil Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/isdn/gigaset/bas-gigaset.c | 2365 ++++++++++++++++++++++++++++++++++++ 1 file changed, 2365 insertions(+) create mode 100644 drivers/isdn/gigaset/bas-gigaset.c (limited to 'drivers/isdn/gigaset') diff --git a/drivers/isdn/gigaset/bas-gigaset.c b/drivers/isdn/gigaset/bas-gigaset.c new file mode 100644 index 00000000000..31f0f07832b --- /dev/null +++ b/drivers/isdn/gigaset/bas-gigaset.c @@ -0,0 +1,2365 @@ +/* + * USB driver for Gigaset 307x base via direct USB connection. + * + * Copyright (c) 2001 by Hansjoerg Lipp , + * Tilman Schmidt , + * Stefan Eilers . + * + * Based on usb-gigaset.c. + * + * ===================================================================== + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * ===================================================================== + * ToDo: ... + * ===================================================================== + * Version: $Id: bas-gigaset.c,v 1.52.4.19 2006/02/04 18:28:16 hjlipp Exp $ + * ===================================================================== + */ + +#include "gigaset.h" + +#include +#include +#include +#include +#include +#include +#include + +/* Version Information */ +#define DRIVER_AUTHOR "Tilman Schmidt , Hansjoerg Lipp , Stefan Eilers " +#define DRIVER_DESC "USB Driver for Gigaset 307x" + + +/* Module parameters */ + +static int startmode = SM_ISDN; +static int cidmode = 1; + +module_param(startmode, int, S_IRUGO); +module_param(cidmode, int, S_IRUGO); +MODULE_PARM_DESC(startmode, "start in isdn4linux mode"); +MODULE_PARM_DESC(cidmode, "Call-ID mode"); + +#define GIGASET_MINORS 1 +#define GIGASET_MINOR 16 +#define GIGASET_MODULENAME "bas_gigaset" +#define GIGASET_DEVFSNAME "gig/bas/" +#define GIGASET_DEVNAME "ttyGB" + +#define IF_WRITEBUF 256 //FIXME + +/* Values for the Gigaset 307x */ +#define USB_GIGA_VENDOR_ID 0x0681 +#define USB_GIGA_PRODUCT_ID 0x0001 +#define USB_4175_PRODUCT_ID 0x0002 +#define USB_SX303_PRODUCT_ID 0x0021 +#define USB_SX353_PRODUCT_ID 0x0022 + +/* table of devices that work with this driver */ +static struct usb_device_id gigaset_table [] = { + { USB_DEVICE(USB_GIGA_VENDOR_ID, USB_GIGA_PRODUCT_ID) }, + { USB_DEVICE(USB_GIGA_VENDOR_ID, USB_4175_PRODUCT_ID) }, + { USB_DEVICE(USB_GIGA_VENDOR_ID, USB_SX303_PRODUCT_ID) }, + { USB_DEVICE(USB_GIGA_VENDOR_ID, USB_SX353_PRODUCT_ID) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, gigaset_table); + +/* Get a minor range for your devices from the usb maintainer */ +#define USB_SKEL_MINOR_BASE 200 + +/*======================= local function prototypes =============================*/ + +/* This function is called if a new device is connected to the USB port. It + * checks whether this new device belongs to this driver. + */ +static int gigaset_probe(struct usb_interface *interface, + const struct usb_device_id *id); + +/* Function will be called if the device is unplugged */ +static void gigaset_disconnect(struct usb_interface *interface); + + +/*==============================================================================*/ + +struct bas_cardstate { + struct usb_device *udev; /* USB device pointer */ + struct usb_interface *interface; /* interface for this device */ + unsigned char minor; /* starting minor number */ + + struct urb *urb_ctrl; /* control pipe default URB */ + struct usb_ctrlrequest dr_ctrl; + struct timer_list timer_ctrl; /* control request timeout */ + + struct timer_list timer_atrdy; /* AT command ready timeout */ + struct urb *urb_cmd_out; /* for sending AT commands */ + struct usb_ctrlrequest dr_cmd_out; + int retry_cmd_out; + + struct urb *urb_cmd_in; /* for receiving AT replies */ + struct usb_ctrlrequest dr_cmd_in; + struct timer_list timer_cmd_in; /* receive request timeout */ + unsigned char *rcvbuf; /* AT reply receive buffer */ + + struct urb *urb_int_in; /* URB for interrupt pipe */ + unsigned char int_in_buf[3]; + + spinlock_t lock; /* locks all following */ + atomic_t basstate; /* bitmap (BS_*) */ + int pending; /* uncompleted base request */ + int rcvbuf_size; /* size of AT receive buffer */ + /* 0: no receive in progress */ + int retry_cmd_in; /* receive req retry count */ +}; + +/* status of direct USB connection to 307x base (bits in basstate) */ +#define BS_ATOPEN 0x001 +#define BS_B1OPEN 0x002 +#define BS_B2OPEN 0x004 +#define BS_ATREADY 0x008 +#define BS_INIT 0x010 +#define BS_ATTIMER 0x020 + + +static struct gigaset_driver *driver = NULL; +static struct cardstate *cardstate = NULL; + +/* usb specific object needed to register this driver with the usb subsystem */ +static struct usb_driver gigaset_usb_driver = { + .name = GIGASET_MODULENAME, + .probe = gigaset_probe, + .disconnect = gigaset_disconnect, + .id_table = gigaset_table, +}; + +/* get message text for USB status code + */ +static char *get_usb_statmsg(int status) +{ + static char unkmsg[28]; + + switch (status) { + case 0: + return "success"; + case -ENOENT: + return "canceled"; + case -ECONNRESET: + return "canceled (async)"; + case -EINPROGRESS: + return "pending"; + case -EPROTO: + return "bit stuffing or unknown USB error"; + case -EILSEQ: + return "Illegal byte sequence (CRC mismatch)"; + case -EPIPE: + return "babble detect or endpoint stalled"; + case -ENOSR: + return "buffer error"; + case -ETIMEDOUT: + return "timed out"; + case -ENODEV: + return "device not present"; + case -EREMOTEIO: + return "short packet detected"; + case -EXDEV: + return "partial isochronous transfer"; + case -EINVAL: + return "invalid argument"; + case -ENXIO: + return "URB already queued"; + case -EAGAIN: + return "isochronous start frame too early or too much scheduled"; + case -EFBIG: + return "too many isochronous frames requested"; + case -EMSGSIZE: + return "endpoint message size zero"; + case -ESHUTDOWN: + return "endpoint shutdown"; + case -EBUSY: + return "another request pending"; + default: + snprintf(unkmsg, sizeof(unkmsg), "unknown error %d", status); + return unkmsg; + } +} + +/* usb_pipetype_str + * retrieve string representation of USB pipe type + */ +static inline char *usb_pipetype_str(int pipe) +{ + if (usb_pipeisoc(pipe)) + return "Isoc"; + if (usb_pipeint(pipe)) + return "Int"; + if (usb_pipecontrol(pipe)) + return "Ctrl"; + if (usb_pipebulk(pipe)) + return "Bulk"; + return "?"; +} + +/* dump_urb + * write content of URB to syslog for debugging + */ +static inline void dump_urb(enum debuglevel level, const char *tag, + struct urb *urb) +{ +#ifdef CONFIG_GIGASET_DEBUG + int i; + IFNULLRET(tag); + dbg(level, "%s urb(0x%08lx)->{", tag, (unsigned long) urb); + if (urb) { + dbg(level, + " dev=0x%08lx, pipe=%s:EP%d/DV%d:%s, " + "status=%d, hcpriv=0x%08lx, transfer_flags=0x%x,", + (unsigned long) urb->dev, + usb_pipetype_str(urb->pipe), + usb_pipeendpoint(urb->pipe), usb_pipedevice(urb->pipe), + usb_pipein(urb->pipe) ? "in" : "out", + urb->status, (unsigned long) urb->hcpriv, + urb->transfer_flags); + dbg(level, + " transfer_buffer=0x%08lx[%d], actual_length=%d, " + "bandwidth=%d, setup_packet=0x%08lx,", + (unsigned long) urb->transfer_buffer, + urb->transfer_buffer_length, urb->actual_length, + urb->bandwidth, (unsigned long) urb->setup_packet); + dbg(level, + " start_frame=%d, number_of_packets=%d, interval=%d, " + "error_count=%d,", + urb->start_frame, urb->number_of_packets, urb->interval, + urb->error_count); + dbg(level, + " context=0x%08lx, complete=0x%08lx, iso_frame_desc[]={", + (unsigned long) urb->context, + (unsigned long) urb->complete); + for (i = 0; i < urb->number_of_packets; i++) { + struct usb_iso_packet_descriptor *pifd = &urb->iso_frame_desc[i]; + dbg(level, + " {offset=%u, length=%u, actual_length=%u, " + "status=%u}", + pifd->offset, pifd->length, pifd->actual_length, + pifd->status); + } + } + dbg(level, "}}"); +#endif +} + +/* read/set modem control bits etc. (m10x only) */ +static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state, + unsigned new_state) +{ + return -EINVAL; +} + +static int gigaset_baud_rate(struct cardstate *cs, unsigned cflag) +{ + return -EINVAL; +} + +static int gigaset_set_line_ctrl(struct cardstate *cs, unsigned cflag) +{ + return -EINVAL; +} + +/* error_hangup + * hang up any existing connection because of an unrecoverable error + * This function may be called from any context and takes care of scheduling + * the necessary actions for execution outside of interrupt context. + * argument: + * B channel control structure + */ +static inline void error_hangup(struct bc_state *bcs) +{ + struct cardstate *cs = bcs->cs; + + dbg(DEBUG_ANY, + "%s: scheduling HUP for channel %d", __func__, bcs->channel); + + if (!gigaset_add_event(cs, &bcs->at_state, EV_HUP, NULL, 0, NULL)) { + //FIXME what should we do? + return; + } + + gigaset_schedule_event(cs); +} + +/* error_reset + * reset Gigaset device because of an unrecoverable error + * This function may be called from any context and takes care of scheduling + * the necessary actions for execution outside of interrupt context. + * argument: + * controller state structure + */ +static inline void error_reset(struct cardstate *cs) +{ + //FIXME try to recover without bothering the user + err("unrecoverable error - please disconnect the Gigaset base to reset"); +} + +/* check_pending + * check for completion of pending control request + * parameter: + * urb USB request block of completed request + * urb->context = hardware specific controller state structure + */ +static void check_pending(struct bas_cardstate *ucs) +{ + unsigned long flags; + + IFNULLRET(ucs); + IFNULLRET(cardstate); + + spin_lock_irqsave(&ucs->lock, flags); + switch (ucs->pending) { + case 0: + break; + case HD_OPEN_ATCHANNEL: + if (atomic_read(&ucs->basstate) & BS_ATOPEN) + ucs->pending = 0; + break; + case HD_OPEN_B1CHANNEL: + if (atomic_read(&ucs->basstate) & BS_B1OPEN) + ucs->pending = 0; + break; + case HD_OPEN_B2CHANNEL: + if (atomic_read(&ucs->basstate) & BS_B2OPEN) + ucs->pending = 0; + break; + case HD_CLOSE_ATCHANNEL: + if (!(atomic_read(&ucs->basstate) & BS_ATOPEN)) + ucs->pending = 0; + //wake_up_interruptible(cs->initwait); + //FIXME need own wait queue? + break; + case HD_CLOSE_B1CHANNEL: + if (!(atomic_read(&ucs->basstate) & BS_B1OPEN)) + ucs->pending = 0; + break; + case HD_CLOSE_B2CHANNEL: + if (!(atomic_read(&ucs->basstate) & BS_B2OPEN)) + ucs->pending = 0; + break; + case HD_DEVICE_INIT_ACK: /* no reply expected */ + ucs->pending = 0; + break; + /* HD_READ_ATMESSAGE, HD_WRITE_ATMESSAGE, HD_RESET_INTERRUPTPIPE + * are handled separately and should never end up here + */ + default: + warn("unknown pending request 0x%02x cleared", ucs->pending); + ucs->pending = 0; + } + + if (!ucs->pending) + del_timer(&ucs->timer_ctrl); + + spin_unlock_irqrestore(&ucs->lock, flags); +} + +/* cmd_in_timeout + * timeout routine for command input request + * argument: + * controller state structure + */ +static void cmd_in_timeout(unsigned long data) +{ + struct cardstate *cs = (struct cardstate *) data; + struct bas_cardstate *ucs; + unsigned long flags; + + IFNULLRET(cs); + ucs = cs->hw.bas; + IFNULLRET(ucs); + + spin_lock_irqsave(&cs->lock, flags); + if (!atomic_read(&cs->connected)) { + dbg(DEBUG_USBREQ, "%s: disconnected", __func__); + spin_unlock_irqrestore(&cs->lock, flags); + return; + } + if (!ucs->rcvbuf_size) { + dbg(DEBUG_USBREQ, "%s: no receive in progress", __func__); + spin_unlock_irqrestore(&cs->lock, flags); + return; + } + spin_unlock_irqrestore(&cs->lock, flags); + + err("timeout reading AT response"); + error_reset(cs); //FIXME retry? +} + + +static void read_ctrl_callback(struct urb *urb, struct pt_regs *regs); + +/* atread_submit + * submit an HD_READ_ATMESSAGE command URB + * parameters: + * cs controller state structure + * timeout timeout in 1/10 sec., 0: none + * return value: + * 0 on success + * -EINVAL if a NULL pointer is encountered somewhere + * -EBUSY if another request is pending + * any URB submission error code + */ +static int atread_submit(struct cardstate *cs, int timeout) +{ + struct bas_cardstate *ucs; + int ret; + + IFNULLRETVAL(cs, -EINVAL); + ucs = cs->hw.bas; + IFNULLRETVAL(ucs, -EINVAL); + IFNULLRETVAL(ucs->urb_cmd_in, -EINVAL); + + dbg(DEBUG_USBREQ, "-------> HD_READ_ATMESSAGE (%d)", ucs->rcvbuf_size); + + if (ucs->urb_cmd_in->status == -EINPROGRESS) { + err("could not submit HD_READ_ATMESSAGE: URB busy"); + return -EBUSY; + } + + ucs->dr_cmd_in.bRequestType = IN_VENDOR_REQ; + ucs->dr_cmd_in.bRequest = HD_READ_ATMESSAGE; + ucs->dr_cmd_in.wValue = 0; + ucs->dr_cmd_in.wIndex = 0; + ucs->dr_cmd_in.wLength = cpu_to_le16(ucs->rcvbuf_size); + usb_fill_control_urb(ucs->urb_cmd_in, ucs->udev, + usb_rcvctrlpipe(ucs->udev, 0), + (unsigned char*) & ucs->dr_cmd_in, + ucs->rcvbuf, ucs->rcvbuf_size, + read_ctrl_callback, cs->inbuf); + + if ((ret = usb_submit_urb(ucs->urb_cmd_in, SLAB_ATOMIC)) != 0) { + err("could not submit HD_READ_ATMESSAGE: %s", + get_usb_statmsg(ret)); + return ret; + } + + if (timeout > 0) { + dbg(DEBUG_USBREQ, "setting timeout of %d/10 secs", timeout); + ucs->timer_cmd_in.expires = jiffies + timeout * HZ / 10; + ucs->timer_cmd_in.data = (unsigned long) cs; + ucs->timer_cmd_in.function = cmd_in_timeout; + add_timer(&ucs->timer_cmd_in); + } + return 0; +} + +static void stopurbs(struct bas_bc_state *); +static int start_cbsend(struct cardstate *); + +/* set/clear bits in base connection state + */ +inline static void update_basstate(struct bas_cardstate *ucs, + int set, int clear) +{ + unsigned long flags; + int state; + + spin_lock_irqsave(&ucs->lock, flags); + state = atomic_read(&ucs->basstate); + state &= ~clear; + state |= set; + atomic_set(&ucs->basstate, state); + spin_unlock_irqrestore(&ucs->lock, flags); +} + + +/* read_int_callback + * USB completion handler for interrupt pipe input + * called by the USB subsystem in interrupt context + * parameter: + * urb USB request block + * urb->context = controller state structure + */ +static void read_int_callback(struct urb *urb, struct pt_regs *regs) +{ + struct cardstate *cs; + struct bas_cardstate *ucs; + struct bc_state *bcs; + unsigned long flags; + int status; + unsigned l; + int channel; + + IFNULLRET(urb); + cs = (struct cardstate *) urb->context; + IFNULLRET(cs); + ucs = cs->hw.bas; + IFNULLRET(ucs); + + if (unlikely(!atomic_read(&cs->connected))) { + warn("%s: disconnected", __func__); + return; + } + + switch (urb->status) { + case 0: /* success */ + break; + case -ENOENT: /* canceled */ + case -ECONNRESET: /* canceled (async) */ + case -EINPROGRESS: /* pending */ + /* ignore silently */ + dbg(DEBUG_USBREQ, + "%s: %s", __func__, get_usb_statmsg(urb->status)); + return; + default: /* severe trouble */ + warn("interrupt read: %s", get_usb_statmsg(urb->status)); + //FIXME corrective action? resubmission always ok? + goto resubmit; + } + + l = (unsigned) ucs->int_in_buf[1] + + (((unsigned) ucs->int_in_buf[2]) << 8); + + dbg(DEBUG_USBREQ, + "<-------%d: 0x%02x (%u [0x%02x 0x%02x])", urb->actual_length, + (int)ucs->int_in_buf[0], l, + (int)ucs->int_in_buf[1], (int)ucs->int_in_buf[2]); + + channel = 0; + + switch (ucs->int_in_buf[0]) { + case HD_DEVICE_INIT_OK: + update_basstate(ucs, BS_INIT, 0); + break; + + case HD_READY_SEND_ATDATA: + del_timer(&ucs->timer_atrdy); + update_basstate(ucs, BS_ATREADY, BS_ATTIMER); + start_cbsend(cs); + break; + + case HD_OPEN_B2CHANNEL_ACK: + ++channel; + case HD_OPEN_B1CHANNEL_ACK: + bcs = cs->bcs + channel; + update_basstate(ucs, BS_B1OPEN << channel, 0); + gigaset_bchannel_up(bcs); + break; + + case HD_OPEN_ATCHANNEL_ACK: + update_basstate(ucs, BS_ATOPEN, 0); + start_cbsend(cs); + break; + + case HD_CLOSE_B2CHANNEL_ACK: + ++channel; + case HD_CLOSE_B1CHANNEL_ACK: + bcs = cs->bcs + channel; + update_basstate(ucs, 0, BS_B1OPEN << channel); + stopurbs(bcs->hw.bas); + gigaset_bchannel_down(bcs); + break; + + case HD_CLOSE_ATCHANNEL_ACK: + update_basstate(ucs, 0, BS_ATOPEN); + break; + + case HD_B2_FLOW_CONTROL: + ++channel; + case HD_B1_FLOW_CONTROL: + bcs = cs->bcs + channel; + atomic_add((l - BAS_NORMFRAME) * BAS_CORRFRAMES, + &bcs->hw.bas->corrbytes); + dbg(DEBUG_ISO, + "Flow control (channel %d, sub %d): 0x%02x => %d", + channel, bcs->hw.bas->numsub, l, + atomic_read(&bcs->hw.bas->corrbytes)); + break; + + case HD_RECEIVEATDATA_ACK: /* AT response ready to be received */ + if (!l) { + warn("HD_RECEIVEATDATA_ACK with length 0 ignored"); + break; + } + spin_lock_irqsave(&cs->lock, flags); + if (ucs->rcvbuf_size) { + spin_unlock_irqrestore(&cs->lock, flags); + err("receive AT data overrun, %d bytes lost", l); + error_reset(cs); //FIXME reschedule + break; + } + if ((ucs->rcvbuf = kmalloc(l, GFP_ATOMIC)) == NULL) { + spin_unlock_irqrestore(&cs->lock, flags); + err("%s: out of memory, %d bytes lost", __func__, l); + error_reset(cs); //FIXME reschedule + break; + } + ucs->rcvbuf_size = l; + ucs->retry_cmd_in = 0; + if ((status = atread_submit(cs, BAS_TIMEOUT)) < 0) { + kfree(ucs->rcvbuf); + ucs->rcvbuf = NULL; + ucs->rcvbuf_size = 0; + error_reset(cs); //FIXME reschedule + } + spin_unlock_irqrestore(&cs->lock, flags); + break; + + case HD_RESET_INTERRUPT_PIPE_ACK: + dbg(DEBUG_USBREQ, "HD_RESET_INTERRUPT_PIPE_ACK"); + break; + + case HD_SUSPEND_END: + dbg(DEBUG_USBREQ, "HD_SUSPEND_END"); + break; + + default: + warn("unknown Gigaset signal 0x%02x (%u) ignored", + (int) ucs->int_in_buf[0], l); + } + + check_pending(ucs); + +resubmit: + status = usb_submit_urb(urb, SLAB_ATOMIC); + if (unlikely(status)) { + err("could not resubmit interrupt URB: %s", + get_usb_statmsg(status)); + error_reset(cs); + } +} + +/* read_ctrl_callback + * USB completion handler for control pipe input + * called by the USB subsystem in interrupt context + * parameter: + * urb USB request block + * urb->context = inbuf structure for controller state + */ +static void read_ctrl_callback(struct urb *urb, struct pt_regs *regs) +{ + struct cardstate *cs; + struct bas_cardstate *ucs; + unsigned numbytes; + unsigned long flags; + struct inbuf_t *inbuf; + int have_data = 0; + + IFNULLRET(urb); + inbuf = (struct inbuf_t *) urb->context; + IFNULLRET(inbuf); + cs = inbuf->cs; + IFNULLRET(cs); + ucs = cs->hw.bas; + IFNULLRET(ucs); + + spin_lock_irqsave(&cs->lock, flags); + if (!atomic_read(&cs->connected)) { + warn("%s: disconnected", __func__); + spin_unlock_irqrestore(&cs->lock, flags); + return; + } + + if (!ucs->rcvbuf_size) { + warn("%s: no receive in progress", __func__); + spin_unlock_irqrestore(&cs->lock, flags); + return; + } + + del_timer(&ucs->timer_cmd_in); + + switch (urb->status) { + case 0: /* normal completion */ + numbytes = urb->actual_length; + if (unlikely(numbytes == 0)) { + warn("control read: empty block received"); + goto retry; + } + if (unlikely(numbytes != ucs->rcvbuf_size)) { + warn("control read: received %d chars, expected %d", + numbytes, ucs->rcvbuf_size); + if (numbytes > ucs->rcvbuf_size) + numbytes = ucs->rcvbuf_size; + } + + /* copy received bytes to inbuf */ + have_data = gigaset_fill_inbuf(inbuf, ucs->rcvbuf, numbytes); + + if (unlikely(numbytes < ucs->rcvbuf_size)) { + /* incomplete - resubmit for remaining bytes */ + ucs->rcvbuf_size -= numbytes; + ucs->retry_cmd_in = 0; + goto retry; + } + break; + + case -ENOENT: /* canceled */ + case -ECONNRESET: /* canceled (async) */ + case -EINPROGRESS: /* pending */ + /* no action necessary */ + dbg(DEBUG_USBREQ, + "%s: %s", __func__, get_usb_statmsg(urb->status)); + break; + + default: /* severe trouble */ + warn("control read: %s", get_usb_statmsg(urb->status)); + retry: + if (ucs->retry_cmd_in++ < BAS_RETRY) { + notice("control read: retry %d", ucs->retry_cmd_in); + if (atread_submit(cs, BAS_TIMEOUT) >= 0) { + /* resubmitted - bypass regular exit block */ + spin_unlock_irqrestore(&cs->lock, flags); + return; + } + } else { + err("control read: giving up after %d tries", + ucs->retry_cmd_in); + } + error_reset(cs); + } + + kfree(ucs->rcvbuf); + ucs->rcvbuf = NULL; + ucs->rcvbuf_size = 0; + spin_unlock_irqrestore(&cs->lock, flags); + if (have_data) { + dbg(DEBUG_INTR, "%s-->BH", __func__); + gigaset_schedule_event(cs); + } +} + +/* read_iso_callback + * USB completion handler for B channel isochronous input + * called by the USB subsystem in interrupt context + * parameter: + * urb USB request block of completed request + * urb->context = bc_state structure + */ +static void read_iso_callback(struct urb *urb, struct pt_regs *regs) +{ + struct bc_state *bcs; + struct bas_bc_state *ubc; + unsigned long flags; + int i, rc; + + IFNULLRET(urb); + IFNULLRET(urb->context); + IFNULLRET(cardstate); + + /* status codes not worth bothering the tasklet with */ + if (unlikely(urb->status == -ENOENT || urb->status == -ECONNRESET || + urb->status == -EINPROGRESS)) { + dbg(DEBUG_ISO, + "%s: %s", __func__, get_usb_statmsg(urb->status)); + return; + } + + bcs = (struct bc_state *) urb->context; + ubc = bcs->hw.bas; + IFNULLRET(ubc); + + spin_lock_irqsave(&ubc->isoinlock, flags); + if (likely(ubc->isoindone == NULL)) { + /* pass URB to tasklet */ + ubc->isoindone = urb; + tasklet_schedule(&ubc->rcvd_tasklet); + } else { + /* tasklet still busy, drop data and resubmit URB */ + ubc->loststatus = urb->status; + for (i = 0; i < BAS_NUMFRAMES; i++) { + ubc->isoinlost += urb->iso_frame_desc[i].actual_length; + if (unlikely(urb->iso_frame_desc[i].status != 0 && + urb->iso_frame_desc[i].status != -EINPROGRESS)) { + ubc->loststatus = urb->iso_frame_desc[i].status; + } + urb->iso_frame_desc[i].status = 0; + urb->iso_frame_desc[i].actual_length = 0; + } + if (likely(atomic_read(&ubc->running))) { + urb->dev = bcs->cs->hw.bas->udev; /* clobbered by USB subsystem */ + urb->transfer_flags = URB_ISO_ASAP; + urb->number_of_packets = BAS_NUMFRAMES; + dbg(DEBUG_ISO, "%s: isoc read overrun/resubmit", __func__); + rc = usb_submit_urb(urb, SLAB_ATOMIC); + if (unlikely(rc != 0)) { + err("could not resubmit isochronous read URB: %s", + get_usb_statmsg(rc)); + dump_urb(DEBUG_ISO, "isoc read", urb); + error_hangup(bcs); + } + } + } + spin_unlock_irqrestore(&ubc->isoinlock, flags); +} + +/* write_iso_callback + * USB completion handler for B channel isochronous output + * called by the USB subsystem in interrupt context + * parameter: + * urb USB request block of completed request + * urb->context = isow_urbctx_t structure + */ +static void write_iso_callback(struct urb *urb, struct pt_regs *regs) +{ + struct isow_urbctx_t *ucx; + struct bas_bc_state *ubc; + unsigned long flags; + + IFNULLRET(urb); + IFNULLRET(urb->context); + IFNULLRET(cardstate); + + /* status codes not worth bothering the tasklet with */ + if (unlikely(urb->status == -ENOENT || urb->status == -ECONNRESET || + urb->status == -EINPROGRESS)) { + dbg(DEBUG_ISO, + "%s: %s", __func__, get_usb_statmsg(urb->status)); + return; + } + + /* pass URB context to tasklet */ + ucx = (struct isow_urbctx_t *) urb->context; + IFNULLRET(ucx->bcs); + ubc = ucx->bcs->hw.bas; + IFNULLRET(ubc); + + spin_lock_irqsave(&ubc->isooutlock, flags); + ubc->isooutovfl = ubc->isooutdone; + ubc->isooutdone = ucx; + spin_unlock_irqrestore(&ubc->isooutlock, flags); + tasklet_schedule(&ubc->sent_tasklet); +} + +/* starturbs + * prepare and submit USB request blocks for isochronous input and output + * argument: + * B channel control structure + * return value: + * 0 on success + * < 0 on error (no URBs submitted) + */ +static int starturbs(struct bc_state *bcs) +{ + struct urb *urb; + struct bas_bc_state *ubc; + int j, k; + int rc; + + IFNULLRETVAL(bcs, -EFAULT); + ubc = bcs->hw.bas; + IFNULLRETVAL(ubc, -EFAULT); + + /* initialize L2 reception */ + if (bcs->proto2 == ISDN_PROTO_L2_HDLC) + bcs->inputstate |= INS_flag_hunt; + + /* submit all isochronous input URBs */ + atomic_set(&ubc->running, 1); + for (k = 0; k < BAS_INURBS; k++) { + urb = ubc->isoinurbs[k]; + if (!urb) { + err("isoinurbs[%d]==NULL", k); + rc = -EFAULT; + goto error; + } + + urb->dev = bcs->cs->hw.bas->udev; + urb->pipe = usb_rcvisocpipe(urb->dev, 3 + 2 * bcs->channel); + urb->transfer_flags = URB_ISO_ASAP; + urb->transfer_buffer = ubc->isoinbuf + k * BAS_INBUFSIZE; + urb->transfer_buffer_length = BAS_INBUFSIZE; + urb->number_of_packets = BAS_NUMFRAMES; + urb->interval = BAS_FRAMETIME; + urb->complete = read_iso_callback; + urb->context = bcs; + for (j = 0; j < BAS_NUMFRAMES; j++) { + urb->iso_frame_desc[j].offset = j * BAS_MAXFRAME; + urb->iso_frame_desc[j].length = BAS_MAXFRAME; + urb->iso_frame_desc[j].status = 0; + urb->iso_frame_desc[j].actual_length = 0; + } + + dump_urb(DEBUG_ISO, "Initial isoc read", urb); + if ((rc = usb_submit_urb(urb, SLAB_ATOMIC)) != 0) { + err("could not submit isochronous read URB %d: %s", + k, get_usb_statmsg(rc)); + goto error; + } + } + + /* initialize L2 transmission */ + gigaset_isowbuf_init(ubc->isooutbuf, PPP_FLAG); + + /* set up isochronous output URBs for flag idling */ + for (k = 0; k < BAS_OUTURBS; ++k) { + urb = ubc->isoouturbs[k].urb; + if (!urb) { + err("isoouturbs[%d].urb==NULL", k); + rc = -EFAULT; + goto error; + } + urb->dev = bcs->cs->hw.bas->udev; + urb->pipe = usb_sndisocpipe(urb->dev, 4 + 2 * bcs->channel); + urb->transfer_flags = URB_ISO_ASAP; + urb->transfer_buffer = ubc->isooutbuf->data; + urb->transfer_buffer_length = sizeof(ubc->isooutbuf->data); + urb->number_of_packets = BAS_NUMFRAMES; + urb->interval = BAS_FRAMETIME; + urb->complete = write_iso_callback; + urb->context = &ubc->isoouturbs[k]; + for (j = 0; j < BAS_NUMFRAMES; ++j) { + urb->iso_frame_desc[j].offset = BAS_OUTBUFSIZE; + urb->iso_frame_desc[j].length = BAS_NORMFRAME; + urb->iso_frame_desc[j].status = 0; + urb->iso_frame_desc[j].actual_length = 0; + } + ubc->isoouturbs[k].limit = -1; + } + + /* submit two URBs, keep third one */ + for (k = 0; k < 2; ++k) { + dump_urb(DEBUG_ISO, "Initial isoc write", urb); + rc = usb_submit_urb(ubc->isoouturbs[k].urb, SLAB_ATOMIC); + if (rc != 0) { + err("could not submit isochronous write URB %d: %s", + k, get_usb_statmsg(rc)); + goto error; + } + } + dump_urb(DEBUG_ISO, "Initial isoc write (free)", urb); + ubc->isooutfree = &ubc->isoouturbs[2]; + ubc->isooutdone = ubc->isooutovfl = NULL; + return 0; + error: + stopurbs(ubc); + return rc; +} + +/* stopurbs + * cancel the USB request blocks for isochronous input and output + * errors are silently ignored + * argument: + * B channel control structure + */ +static void stopurbs(struct bas_bc_state *ubc) +{ + int k, rc; + + IFNULLRET(ubc); + + atomic_set(&ubc->running, 0); + + for (k = 0; k < BAS_INURBS; ++k) { + rc = usb_unlink_urb(ubc->isoinurbs[k]); + dbg(DEBUG_ISO, "%s: isoc input URB %d unlinked, result = %d", + __func__, k, rc); + } + + for (k = 0; k < BAS_OUTURBS; ++k) { + rc = usb_unlink_urb(ubc->isoouturbs[k].urb); + dbg(DEBUG_ISO, "%s: isoc output URB %d unlinked, result = %d", + __func__, k, rc); + } +} + +/* Isochronous Write - Bottom Half */ +/* =============================== */ + +/* submit_iso_write_urb + * fill and submit the next isochronous write URB + * parameters: + * bcs B channel state structure + * return value: + * number of frames submitted in URB + * 0 if URB not submitted because no data available (isooutbuf busy) + * error code < 0 on error + */ +static int submit_iso_write_urb(struct isow_urbctx_t *ucx) +{ + struct urb *urb; + struct bas_bc_state *ubc; + struct usb_iso_packet_descriptor *ifd; + int corrbytes, nframe, rc; + + IFNULLRETVAL(ucx, -EFAULT); + urb = ucx->urb; + IFNULLRETVAL(urb, -EFAULT); + IFNULLRETVAL(ucx->bcs, -EFAULT); + ubc = ucx->bcs->hw.bas; + IFNULLRETVAL(ubc, -EFAULT); + + urb->dev = ucx->bcs->cs->hw.bas->udev; /* clobbered by USB subsystem */ + urb->transfer_flags = URB_ISO_ASAP; + urb->transfer_buffer = ubc->isooutbuf->data; + urb->transfer_buffer_length = sizeof(ubc->isooutbuf->data); + + for (nframe = 0; nframe < BAS_NUMFRAMES; nframe++) { + ifd = &urb->iso_frame_desc[nframe]; + + /* compute frame length according to flow control */ + ifd->length = BAS_NORMFRAME; + if ((corrbytes = atomic_read(&ubc->corrbytes)) != 0) { + dbg(DEBUG_ISO, "%s: corrbytes=%d", __func__, corrbytes); + if (corrbytes > BAS_HIGHFRAME - BAS_NORMFRAME) + corrbytes = BAS_HIGHFRAME - BAS_NORMFRAME; + else if (corrbytes < BAS_LOWFRAME - BAS_NORMFRAME) + corrbytes = BAS_LOWFRAME - BAS_NORMFRAME; + ifd->length += corrbytes; + atomic_add(-corrbytes, &ubc->corrbytes); + } + //dbg(DEBUG_ISO, "%s: frame %d length=%d", __func__, nframe, ifd->length); + + /* retrieve block of data to send */ + ifd->offset = gigaset_isowbuf_getbytes(ubc->isooutbuf, ifd->length); + if (ifd->offset < 0) { + if (ifd->offset == -EBUSY) { + dbg(DEBUG_ISO, "%s: buffer busy at frame %d", + __func__, nframe); + /* tasklet will be restarted from gigaset_send_skb() */ + } else { + err("%s: buffer error %d at frame %d", + __func__, ifd->offset, nframe); + return ifd->offset; + } + break; + } + ucx->limit = atomic_read(&ubc->isooutbuf->nextread); + ifd->status = 0; + ifd->actual_length = 0; + } + if ((urb->number_of_packets = nframe) > 0) { + if ((rc = usb_submit_urb(urb, SLAB_ATOMIC)) != 0) { + err("could not submit isochronous write URB: %s", + get_usb_statmsg(rc)); + dump_urb(DEBUG_ISO, "isoc write", urb); + return rc; + } + ++ubc->numsub; + } + return nframe; +} + +/* write_iso_tasklet + * tasklet scheduled when an isochronous output URB from the Gigaset device + * has completed + * parameter: + * data B channel state structure + */ +static void write_iso_tasklet(unsigned long data) +{ + struct bc_state *bcs; + struct bas_bc_state *ubc; + struct cardstate *cs; + struct isow_urbctx_t *done, *next, *ovfl; + struct urb *urb; + struct usb_iso_packet_descriptor *ifd; + int offset; + unsigned long flags; + int i; + struct sk_buff *skb; + int len; + + bcs = (struct bc_state *) data; + IFNULLRET(bcs); + ubc = bcs->hw.bas; + IFNULLRET(ubc); + cs = bcs->cs; + IFNULLRET(cs); + + /* loop while completed URBs arrive in time */ + for (;;) { + if (unlikely(!atomic_read(&cs->connected))) { + warn("%s: disconnected", __func__); + return; + } + + if (unlikely(!(atomic_read(&ubc->running)))) { + dbg(DEBUG_ISO, "%s: not running", __func__); + return; + } + + /* retrieve completed URBs */ + spin_lock_irqsave(&ubc->isooutlock, flags); + done = ubc->isooutdone; + ubc->isooutdone = NULL; + ovfl = ubc->isooutovfl; + ubc->isooutovfl = NULL; + spin_unlock_irqrestore(&ubc->isooutlock, flags); + if (ovfl) { + err("isochronous write buffer underrun - buy a faster machine :-)"); + error_hangup(bcs); + break; + } + if (!done) + break; + + /* submit free URB if available */ + spin_lock_irqsave(&ubc->isooutlock, flags); + next = ubc->isooutfree; + ubc->isooutfree = NULL; + spin_unlock_irqrestore(&ubc->isooutlock, flags); + if (next) { + if (submit_iso_write_urb(next) <= 0) { + /* could not submit URB, put it back */ + spin_lock_irqsave(&ubc->isooutlock, flags); + if (ubc->isooutfree == NULL) { + ubc->isooutfree = next; + next = NULL; + } + spin_unlock_irqrestore(&ubc->isooutlock, flags); + if (next) { + /* couldn't put it back */ + err("losing isochronous write URB"); + error_hangup(bcs); + } + } + } + + /* process completed URB */ + urb = done->urb; + switch (urb->status) { + case 0: /* normal completion */ + break; + case -EXDEV: /* inspect individual frames */ + /* assumptions (for lack of documentation): + * - actual_length bytes of the frame in error are successfully sent + * - all following frames are not sent at all + */ + dbg(DEBUG_ISO, "%s: URB partially completed", __func__); + offset = done->limit; /* just in case */ + for (i = 0; i < BAS_NUMFRAMES; i++) { + ifd = &urb->iso_frame_desc[i]; + if (ifd->status || + ifd->actual_length != ifd->length) { + warn("isochronous write: frame %d: %s, " + "only %d of %d bytes sent", + i, get_usb_statmsg(ifd->status), + ifd->actual_length, ifd->length); + offset = (ifd->offset + + ifd->actual_length) + % BAS_OUTBUFSIZE; + break; + } + } +#ifdef CONFIG_GIGASET_DEBUG + /* check assumption on remaining frames */ + for (; i < BAS_NUMFRAMES; i++) { + ifd = &urb->iso_frame_desc[i]; + if (ifd->status != -EINPROGRESS + || ifd->actual_length != 0) { + warn("isochronous write: frame %d: %s, " + "%d of %d bytes sent", + i, get_usb_statmsg(ifd->status), + ifd->actual_length, ifd->length); + offset = (ifd->offset + + ifd->actual_length) + % BAS_OUTBUFSIZE; + break; + } + } +#endif + break; + case -EPIPE: //FIXME is this the code for "underrun"? + err("isochronous write stalled"); + error_hangup(bcs); + break; + default: /* severe trouble */ + warn("isochronous write: %s", + get_usb_statmsg(urb->status)); + } + + /* mark the write buffer area covered by this URB as free */ + if (done->limit >= 0) + atomic_set(&ubc->isooutbuf->read, done->limit); + + /* mark URB as free */ + spin_lock_irqsave(&ubc->isooutlock, flags); + next = ubc->isooutfree; + ubc->isooutfree = done; + spin_unlock_irqrestore(&ubc->isooutlock, flags); + if (next) { + /* only one URB still active - resubmit one */ + if (submit_iso_write_urb(next) <= 0) { + /* couldn't submit */ + error_hangup(bcs); + } + } + } + + /* process queued SKBs */ + while ((skb = skb_dequeue(&bcs->squeue))) { + /* copy to output buffer, doing L2 encapsulation */ + len = skb->len; + if (gigaset_isoc_buildframe(bcs, skb->data, len) == -EAGAIN) { + /* insufficient buffer space, push back onto queue */ + skb_queue_head(&bcs->squeue, skb); + dbg(DEBUG_ISO, "%s: skb requeued, qlen=%d", + __func__, skb_queue_len(&bcs->squeue)); + break; + } + skb_pull(skb, len); + gigaset_skb_sent(bcs, skb); + dev_kfree_skb_any(skb); + } +} + +/* Isochronous Read - Bottom Half */ +/* ============================== */ + +/* read_iso_tasklet + * tasklet scheduled when an isochronous input URB from the Gigaset device + * has completed + * parameter: + * data B channel state structure + */ +static void read_iso_tasklet(unsigned long data) +{ + struct bc_state *bcs; + struct bas_bc_state *ubc; + struct cardstate *cs; + struct urb *urb; + char *rcvbuf; + unsigned long flags; + int totleft, numbytes, offset, frame, rc; + + bcs = (struct bc_state *) data; + IFNULLRET(bcs); + ubc = bcs->hw.bas; + IFNULLRET(ubc); + cs = bcs->cs; + IFNULLRET(cs); + + /* loop while more completed URBs arrive in the meantime */ + for (;;) { + if (!atomic_read(&cs->connected)) { + warn("%s: disconnected", __func__); + return; + } + + /* retrieve URB */ + spin_lock_irqsave(&ubc->isoinlock, flags); + if (!(urb = ubc->isoindone)) { + spin_unlock_irqrestore(&ubc->isoinlock, flags); + return; + } + ubc->isoindone = NULL; + if (unlikely(ubc->loststatus != -EINPROGRESS)) { + warn("isochronous read overrun, dropped URB with status: %s, %d bytes lost", + get_usb_statmsg(ubc->loststatus), ubc->isoinlost); + ubc->loststatus = -EINPROGRESS; + } + spin_unlock_irqrestore(&ubc->isoinlock, flags); + + if (unlikely(!(atomic_read(&ubc->running)))) { + dbg(DEBUG_ISO, "%s: channel not running, dropped URB with status: %s", + __func__, get_usb_statmsg(urb->status)); + return; + } + + switch (urb->status) { + case 0: /* normal completion */ + break; + case -EXDEV: /* inspect individual frames (we do that anyway) */ + dbg(DEBUG_ISO, "%s: URB partially completed", __func__); + break; + case -ENOENT: + case -ECONNRESET: + dbg(DEBUG_ISO, "%s: URB canceled", __func__); + continue; /* -> skip */ + case -EINPROGRESS: /* huh? */ + dbg(DEBUG_ISO, "%s: URB still pending", __func__); + continue; /* -> skip */ + case -EPIPE: + err("isochronous read stalled"); + error_hangup(bcs); + continue; /* -> skip */ + default: /* severe trouble */ + warn("isochronous read: %s", + get_usb_statmsg(urb->status)); + goto error; + } + + rcvbuf = urb->transfer_buffer; + totleft = urb->actual_length; + for (frame = 0; totleft > 0 && frame < BAS_NUMFRAMES; frame++) { + if (unlikely(urb->iso_frame_desc[frame].status)) { + warn("isochronous read: frame %d: %s", + frame, get_usb_statmsg(urb->iso_frame_desc[frame].status)); + break; + } + numbytes = urb->iso_frame_desc[frame].actual_length; + if (unlikely(numbytes > BAS_MAXFRAME)) { + warn("isochronous read: frame %d: numbytes (%d) > BAS_MAXFRAME", + frame, numbytes); + break; + } + if (unlikely(numbytes > totleft)) { + warn("isochronous read: frame %d: numbytes (%d) > totleft (%d)", + frame, numbytes, totleft); + break; + } + offset = urb->iso_frame_desc[frame].offset; + if (unlikely(offset + numbytes > BAS_INBUFSIZE)) { + warn("isochronous read: frame %d: offset (%d) + numbytes (%d) > BAS_INBUFSIZE", + frame, offset, numbytes); + break; + } + gigaset_isoc_receive(rcvbuf + offset, numbytes, bcs); + totleft -= numbytes; + } + if (unlikely(totleft > 0)) + warn("isochronous read: %d data bytes missing", + totleft); + + error: + /* URB processed, resubmit */ + for (frame = 0; frame < BAS_NUMFRAMES; frame++) { + urb->iso_frame_desc[frame].status = 0; + urb->iso_frame_desc[frame].actual_length = 0; + } + urb->dev = bcs->cs->hw.bas->udev; /* clobbered by USB subsystem */ + urb->transfer_flags = URB_ISO_ASAP; + urb->number_of_packets = BAS_NUMFRAMES; + if ((rc = usb_submit_urb(urb, SLAB_ATOMIC)) != 0) { + err("could not resubmit isochronous read URB: %s", + get_usb_statmsg(rc)); + dump_urb(DEBUG_ISO, "resubmit iso read", urb); + error_hangup(bcs); + } + } +} + +/* Channel Operations */ +/* ================== */ + +/* req_timeout + * timeout routine for control output request + * argument: + * B channel control structure + */ +static void req_timeout(unsigned long data) +{ + struct bc_state *bcs = (struct bc_state *) data; + struct bas_cardstate *ucs; + int pending; + unsigned long flags; + + IFNULLRET(bcs); + IFNULLRET(bcs->cs); + ucs = bcs->cs->hw.bas; + IFNULLRET(ucs); + + check_pending(ucs); + + spin_lock_irqsave(&ucs->lock, flags); + pending = ucs->pending; + ucs->pending = 0; + spin_unlock_irqrestore(&ucs->lock, flags); + + switch (pending) { + case 0: /* no pending request */ + dbg(DEBUG_USBREQ, "%s: no request pending", __func__); + break; + + case HD_OPEN_ATCHANNEL: + err("timeout opening AT channel"); + error_reset(bcs->cs); + break; + + case HD_OPEN_B2CHANNEL: + case HD_OPEN_B1CHANNEL: + err("timeout opening channel %d", bcs->channel + 1); + error_hangup(bcs); + break; + + case HD_CLOSE_ATCHANNEL: + err("timeout closing AT channel"); + //wake_up_interruptible(cs->initwait); + //FIXME need own wait queue? + break; + + case HD_CLOSE_B2CHANNEL: + case HD_CLOSE_B1CHANNEL: + err("timeout closing channel %d", bcs->channel + 1); + break; + + default: + warn("request 0x%02x timed out, clearing", pending); + } +} + +/* write_ctrl_callback + * USB completion handler for control pipe output + * called by the USB subsystem in interrupt context + * parameter: + * urb USB request block of completed request + * urb->context = hardware specific controller state structure + */ +static void write_ctrl_callback(struct urb *urb, struct pt_regs *regs) +{ + struct bas_cardstate *ucs; + unsigned long flags; + + IFNULLRET(urb); + IFNULLRET(urb->context); + IFNULLRET(cardstate); + + ucs = (struct bas_cardstate *) urb->context; + spin_lock_irqsave(&ucs->lock, flags); + if (urb->status && ucs->pending) { + err("control request 0x%02x failed: %s", + ucs->pending, get_usb_statmsg(urb->status)); + del_timer(&ucs->timer_ctrl); + ucs->pending = 0; + } + /* individual handling of specific request types */ + switch (ucs->pending) { + case HD_DEVICE_INIT_ACK: /* no reply expected */ + ucs->pending = 0; + break; + } + spin_unlock_irqrestore(&ucs->lock, flags); +} + +/* req_submit + * submit a control output request without message buffer to the Gigaset base + * and optionally start a timeout + * parameters: + * bcs B channel control structure + * req control request code (HD_*) + * val control request parameter value (set to 0 if unused) + * timeout timeout in seconds (0: no timeout) + * return value: + * 0 on success + * -EINVAL if a NULL pointer is encountered somewhere + * -EBUSY if another request is pending + * any URB submission error code + */ +static int req_submit(struct bc_state *bcs, int req, int val, int timeout) +{ + struct bas_cardstate *ucs; + int ret; + unsigned long flags; + + IFNULLRETVAL(bcs, -EINVAL); + IFNULLRETVAL(bcs->cs, -EINVAL); + ucs = bcs->cs->hw.bas; + IFNULLRETVAL(ucs, -EINVAL); + IFNULLRETVAL(ucs->urb_ctrl, -EINVAL); + + dbg(DEBUG_USBREQ, "-------> 0x%02x (%d)", req, val); + + spin_lock_irqsave(&ucs->lock, flags); + if (ucs->pending) { + spin_unlock_irqrestore(&ucs->lock, flags); + err("submission of request 0x%02x failed: request 0x%02x still pending", + req, ucs->pending); + return -EBUSY; + } + if (ucs->urb_ctrl->status == -EINPROGRESS) { + spin_unlock_irqrestore(&ucs->lock, flags); + err("could not submit request 0x%02x: URB busy", req); + return -EBUSY; + } + + ucs->dr_ctrl.bRequestType = OUT_VENDOR_REQ; + ucs->dr_ctrl.bRequest = req; + ucs->dr_ctrl.wValue = cpu_to_le16(val); + ucs->dr_ctrl.wIndex = 0; + ucs->dr_ctrl.wLength = 0; + usb_fill_control_urb(ucs->urb_ctrl, ucs->udev, + usb_sndctrlpipe(ucs->udev, 0), + (unsigned char*) &ucs->dr_ctrl, NULL, 0, + write_ctrl_callback, ucs); + if ((ret = usb_submit_urb(ucs->urb_ctrl, SLAB_ATOMIC)) != 0) { + err("could not submit request 0x%02x: %s", + req, get_usb_statmsg(ret)); + spin_unlock_irqrestore(&ucs->lock, flags); + return ret; + } + ucs->pending = req; + + if (timeout > 0) { + dbg(DEBUG_USBREQ, "setting timeout of %d/10 secs", timeout); + ucs->timer_ctrl.expires = jiffies + timeout * HZ / 10; + ucs->timer_ctrl.data = (unsigned long) bcs; + ucs->timer_ctrl.function = req_timeout; + add_timer(&ucs->timer_ctrl); + } + + spin_unlock_irqrestore(&ucs->lock, flags); + return 0; +} + +/* gigaset_init_bchannel + * called by common.c to connect a B channel + * initialize isochronous I/O and tell the Gigaset base to open the channel + * argument: + * B channel control structure + * return value: + * 0 on success, error code < 0 on error + */ +static int gigaset_init_bchannel(struct bc_state *bcs) +{ + int req, ret; + + IFNULLRETVAL(bcs, -EINVAL); + + if ((ret = starturbs(bcs)) < 0) { + err("could not start isochronous I/O for channel %d", + bcs->channel + 1); + error_hangup(bcs); + return ret; + } + + req = bcs->channel ? HD_OPEN_B2CHANNEL : HD_OPEN_B1CHANNEL; + if ((ret = req_submit(bcs, req, 0, BAS_TIMEOUT)) < 0) { + err("could not open channel %d: %s", + bcs->channel + 1, get_usb_statmsg(ret)); + stopurbs(bcs->hw.bas); + error_hangup(bcs); + } + return ret; +} + +/* gigaset_close_bchannel + * called by common.c to disconnect a B channel + * tell the Gigaset base to close the channel + * stopping isochronous I/O and LL notification will be done when the + * acknowledgement for the close arrives + * argument: + * B channel control structure + * return value: + * 0 on success, error code < 0 on error + */ +static int gigaset_close_bchannel(struct bc_state *bcs) +{ + int req, ret; + + IFNULLRETVAL(bcs, -EINVAL); + + if (!(atomic_read(&bcs->cs->hw.bas->basstate) & + (bcs->channel ? BS_B2OPEN : BS_B1OPEN))) { + /* channel not running: just signal common.c */ + gigaset_bchannel_down(bcs); + return 0; + } + + req = bcs->channel ? HD_CLOSE_B2CHANNEL : HD_CLOSE_B1CHANNEL; + if ((ret = req_submit(bcs, req, 0, BAS_TIMEOUT)) < 0) + err("could not submit HD_CLOSE_BxCHANNEL request: %s", + get_usb_statmsg(ret)); + return ret; +} + +/* Device Operations */ +/* ================= */ + +/* complete_cb + * unqueue first command buffer from queue, waking any sleepers + * must be called with cs->cmdlock held + * parameter: + * cs controller state structure + */ +static void complete_cb(struct cardstate *cs) +{ + struct cmdbuf_t *cb; + + IFNULLRET(cs); + cb = cs->cmdbuf; + IFNULLRET(cb); + + /* unqueue completed buffer */ + cs->cmdbytes -= cs->curlen; + dbg(DEBUG_TRANSCMD | DEBUG_LOCKCMD, + "write_command: sent %u bytes, %u left", + cs->curlen, cs->cmdbytes); + if ((cs->cmdbuf = cb->next) != NULL) { + cs->cmdbuf->prev = NULL; + cs->curlen = cs->cmdbuf->len; + } else { + cs->lastcmdbuf = NULL; + cs->curlen = 0; + } + + if (cb->wake_tasklet) + tasklet_schedule(cb->wake_tasklet); + + kfree(cb); +} + +static int atwrite_submit(struct cardstate *cs, unsigned char *buf, int len); + +/* write_command_callback + * USB completion handler for AT command transmission + * called by the USB subsystem in interrupt context + * parameter: + * urb USB request block of completed request + * urb->context = controller state structure + */ +static void write_command_callback(struct urb *urb, struct pt_regs *regs) +{ + struct cardstate *cs; + unsigned long flags; + struct bas_cardstate *ucs; + + IFNULLRET(urb); + cs = (struct cardstate *) urb->context; + IFNULLRET(cs); + ucs = cs->hw.bas; + IFNULLRET(ucs); + + /* check status */ + switch (urb->status) { + case 0: /* normal completion */ + break; + case -ENOENT: /* canceled */ + case -ECONNRESET: /* canceled (async) */ + case -EINPROGRESS: /* pending */ + /* ignore silently */ + dbg(DEBUG_USBREQ, + "%s: %s", __func__, get_usb_statmsg(urb->status)); + return; + default: /* any failure */ + if (++ucs->retry_cmd_out > BAS_RETRY) { + warn("command write: %s, giving up after %d retries", + get_usb_statmsg(urb->status), ucs->retry_cmd_out); + break; + } + if (cs->cmdbuf == NULL) { + warn("command write: %s, cannot retry - cmdbuf gone", + get_usb_statmsg(urb->status)); + break; + } + notice("command write: %s, retry %d", + get_usb_statmsg(urb->status), ucs->retry_cmd_out); + if (atwrite_submit(cs, cs->cmdbuf->buf, cs->cmdbuf->len) >= 0) + /* resubmitted - bypass regular exit block */ + return; + /* command send failed, assume base still waiting */ + update_basstate(ucs, BS_ATREADY, 0); + } + + spin_lock_irqsave(&cs->cmdlock, flags); + if (cs->cmdbuf != NULL) + complete_cb(cs); + spin_unlock_irqrestore(&cs->cmdlock, flags); +} + +/* atrdy_timeout + * timeout routine for AT command transmission + * argument: + * controller state structure + */ +static void atrdy_timeout(unsigned long data) +{ + struct cardstate *cs = (struct cardstate *) data; + struct bas_cardstate *ucs; + + IFNULLRET(cs); + ucs = cs->hw.bas; + IFNULLRET(ucs); + + warn("timeout waiting for HD_READY_SEND_ATDATA"); + + /* fake the missing signal - what else can I do? */ + update_basstate(ucs, BS_ATREADY, BS_ATTIMER); + start_cbsend(cs); +} + +/* atwrite_submit + * submit an HD_WRITE_ATMESSAGE command URB + * parameters: + * cs controller state structure + * buf buffer containing command to send + * len length of command to send + * return value: + * 0 on success + * -EFAULT if a NULL pointer is encountered somewhere + * -EBUSY if another request is pending + * any URB submission error code + */ +static int atwrite_submit(struct cardstate *cs, unsigned char *buf, int len) +{ + struct bas_cardstate *ucs; + int ret; + + IFNULLRETVAL(cs, -EFAULT); + ucs = cs->hw.bas; + IFNULLRETVAL(ucs, -EFAULT); + IFNULLRETVAL(ucs->urb_cmd_out, -EFAULT); + + dbg(DEBUG_USBREQ, "-------> HD_WRITE_ATMESSAGE (%d)", len); + + if (ucs->urb_cmd_out->status == -EINPROGRESS) { + err("could not submit HD_WRITE_ATMESSAGE: URB busy"); + return -EBUSY; + } + + ucs->dr_cmd_out.bRequestType = OUT_VENDOR_REQ; + ucs->dr_cmd_out.bRequest = HD_WRITE_ATMESSAGE; + ucs->dr_cmd_out.wValue = 0; + ucs->dr_cmd_out.wIndex = 0; + ucs->dr_cmd_out.wLength = cpu_to_le16(len); + usb_fill_control_urb(ucs->urb_cmd_out, ucs->udev, + usb_sndctrlpipe(ucs->udev, 0), + (unsigned char*) &ucs->dr_cmd_out, buf, len, + write_command_callback, cs); + + if ((ret = usb_submit_urb(ucs->urb_cmd_out, SLAB_ATOMIC)) != 0) { + err("could not submit HD_WRITE_ATMESSAGE: %s", + get_usb_statmsg(ret)); + return ret; + } + + /* submitted successfully */ + update_basstate(ucs, 0, BS_ATREADY); + + /* start timeout if necessary */ + if (!(atomic_read(&ucs->basstate) & BS_ATTIMER)) { + dbg(DEBUG_OUTPUT, + "setting ATREADY timeout of %d/10 secs", ATRDY_TIMEOUT); + ucs->timer_atrdy.expires = jiffies + ATRDY_TIMEOUT * HZ / 10; + ucs->timer_atrdy.data = (unsigned long) cs; + ucs->timer_atrdy.function = atrdy_timeout; + add_timer(&ucs->timer_atrdy); + update_basstate(ucs, BS_ATTIMER, 0); + } + return 0; +} + +/* start_cbsend + * start transmission of AT command queue if necessary + * parameter: + * cs controller state structure + * return value: + * 0 on success + * error code < 0 on error + */ +static int start_cbsend(struct cardstate *cs) +{ + struct cmdbuf_t *cb; + struct bas_cardstate *ucs; + unsigned long flags; + int rc; + int retval = 0; + + IFNULLRETVAL(cs, -EFAULT); + ucs = cs->hw.bas; + IFNULLRETVAL(ucs, -EFAULT); + + /* check if AT channel is open */ + if (!(atomic_read(&ucs->basstate) & BS_ATOPEN)) { + dbg(DEBUG_TRANSCMD | DEBUG_LOCKCMD, "AT channel not open"); + rc = req_submit(cs->bcs, HD_OPEN_ATCHANNEL, 0, BAS_TIMEOUT); + if (rc < 0) { + err("could not open AT channel"); + /* flush command queue */ + spin_lock_irqsave(&cs->cmdlock, flags); + while (cs->cmdbuf != NULL) + complete_cb(cs); + spin_unlock_irqrestore(&cs->cmdlock, flags); + } + return rc; + } + + /* try to send first command in queue */ + spin_lock_irqsave(&cs->cmdlock, flags); + + while ((cb = cs->cmdbuf) != NULL && + atomic_read(&ucs->basstate) & BS_ATREADY) { + ucs->retry_cmd_out = 0; + rc = atwrite_submit(cs, cb->buf, cb->len); + if (unlikely(rc)) { + retval = rc; + complete_cb(cs); + } + } + + spin_unlock_irqrestore(&cs->cmdlock, flags); + return retval; +} + +/* gigaset_write_cmd + * This function is called by the device independent part of the driver + * to transmit an AT command string to the Gigaset device. + * It encapsulates the device specific method for transmission over the + * direct USB connection to the base. + * The command string is added to the queue of commands to send, and + * USB transmission is started if necessary. + * parameters: + * cs controller state structure + * buf command string to send + * len number of bytes to send (max. IF_WRITEBUF) + * wake_tasklet tasklet to run when transmission is completed (NULL if none) + * return value: + * number of bytes queued on success + * error code < 0 on error + */ +static int gigaset_write_cmd(struct cardstate *cs, + const unsigned char *buf, int len, + struct tasklet_struct *wake_tasklet) +{ + struct cmdbuf_t *cb; + unsigned long flags; + int status; + + gigaset_dbg_buffer(atomic_read(&cs->mstate) != MS_LOCKED ? + DEBUG_TRANSCMD : DEBUG_LOCKCMD, + "CMD Transmit", len, buf, 0); + + if (!atomic_read(&cs->connected)) { + err("%s: not connected", __func__); + return -ENODEV; + } + + if (len <= 0) + return 0; /* nothing to do */ + + if (len > IF_WRITEBUF) + len = IF_WRITEBUF; + if (!(cb = kmalloc(sizeof(struct cmdbuf_t) + len, GFP_ATOMIC))) { + err("%s: out of memory", __func__); + return -ENOMEM; + } + + memcpy(cb->buf, buf, len); + cb->len = len; + cb->offset = 0; + cb->next = NULL; + cb->wake_tasklet = wake_tasklet; + + spin_lock_irqsave(&cs->cmdlock, flags); + cb->prev = cs->lastcmdbuf; + if (cs->lastcmdbuf) + cs->lastcmdbuf->next = cb; + else { + cs->cmdbuf = cb; + cs->curlen = len; + } + cs->cmdbytes += len; + cs->lastcmdbuf = cb; + spin_unlock_irqrestore(&cs->cmdlock, flags); + + status = start_cbsend(cs); + + return status < 0 ? status : len; +} + +/* gigaset_write_room + * tty_driver.write_room interface routine + * return number of characters the driver will accept to be written via gigaset_write_cmd + * parameter: + * controller state structure + * return value: + * number of characters + */ +static int gigaset_write_room(struct cardstate *cs) +{ + return IF_WRITEBUF; +} + +/* gigaset_chars_in_buffer + * tty_driver.chars_in_buffer interface routine + * return number of characters waiting to be sent + * parameter: + * controller state structure + * return value: + * number of characters + */ +static int gigaset_chars_in_buffer(struct cardstate *cs) +{ + unsigned long flags; + unsigned bytes; + + spin_lock_irqsave(&cs->cmdlock, flags); + bytes = cs->cmdbytes; + spin_unlock_irqrestore(&cs->cmdlock, flags); + + return bytes; +} + +/* gigaset_brkchars + * implementation of ioctl(GIGASET_BRKCHARS) + * parameter: + * controller state structure + * return value: + * -EINVAL (unimplemented function) + */ +static int gigaset_brkchars(struct cardstate *cs, const unsigned char buf[6]) +{ + return -EINVAL; +} + + +/* Device Initialization/Shutdown */ +/* ============================== */ + +/* Free hardware dependent part of the B channel structure + * parameter: + * bcs B channel structure + * return value: + * !=0 on success + */ +static int gigaset_freebcshw(struct bc_state *bcs) +{ + if (!bcs->hw.bas) + return 0; + + if (bcs->hw.bas->isooutbuf) + kfree(bcs->hw.bas->isooutbuf); + kfree(bcs->hw.bas); + bcs->hw.bas = NULL; + return 1; +} + +/* Initialize hardware dependent part of the B channel structure + * parameter: + * bcs B channel structure + * return value: + * !=0 on success + */ +static int gigaset_initbcshw(struct bc_state *bcs) +{ + int i; + struct bas_bc_state *ubc; + + bcs->hw.bas = ubc = kmalloc(sizeof(struct bas_bc_state), GFP_KERNEL); + if (!ubc) { + err("could not allocate bas_bc_state"); + return 0; + } + + atomic_set(&ubc->running, 0); + atomic_set(&ubc->corrbytes, 0); + spin_lock_init(&ubc->isooutlock); + for (i = 0; i < BAS_OUTURBS; ++i) { + ubc->isoouturbs[i].urb = NULL; + ubc->isoouturbs[i].bcs = bcs; + } + ubc->isooutdone = ubc->isooutfree = ubc->isooutovfl = NULL; + ubc->numsub = 0; + if (!(ubc->isooutbuf = kmalloc(sizeof(struct isowbuf_t), GFP_KERNEL))) { + err("could not allocate isochronous output buffer"); + kfree(ubc); + bcs->hw.bas = NULL; + return 0; + } + tasklet_init(&ubc->sent_tasklet, + &write_iso_tasklet, (unsigned long) bcs); + + spin_lock_init(&ubc->isoinlock); + for (i = 0; i < BAS_INURBS; ++i) + ubc->isoinurbs[i] = NULL; + ubc->isoindone = NULL; + ubc->loststatus = -EINPROGRESS; + ubc->isoinlost = 0; + ubc->seqlen = 0; + ubc->inbyte = 0; + ubc->inbits = 0; + ubc->goodbytes = 0; + ubc->alignerrs = 0; + ubc->fcserrs = 0; + ubc->frameerrs = 0; + ubc->giants = 0; + ubc->runts = 0; + ubc->aborts = 0; + ubc->shared0s = 0; + ubc->stolen0s = 0; + tasklet_init(&ubc->rcvd_tasklet, + &read_iso_tasklet, (unsigned long) bcs); + return 1; +} + +static void gigaset_reinitbcshw(struct bc_state *bcs) +{ + struct bas_bc_state *ubc = bcs->hw.bas; + + atomic_set(&bcs->hw.bas->running, 0); + atomic_set(&bcs->hw.bas->corrbytes, 0); + bcs->hw.bas->numsub = 0; + spin_lock_init(&ubc->isooutlock); + spin_lock_init(&ubc->isoinlock); + ubc->loststatus = -EINPROGRESS; +} + +static void gigaset_freecshw(struct cardstate *cs) +{ + struct bas_cardstate *ucs = cs->hw.bas; + + del_timer(&ucs->timer_ctrl); + del_timer(&ucs->timer_atrdy); + del_timer(&ucs->timer_cmd_in); + + kfree(cs->hw.bas); +} + +static int gigaset_initcshw(struct cardstate *cs) +{ + struct bas_cardstate *ucs; + + cs->hw.bas = ucs = kmalloc(sizeof *ucs, GFP_KERNEL); + if (!ucs) + return 0; + + ucs->urb_cmd_in = NULL; + ucs->urb_cmd_out = NULL; + ucs->rcvbuf = NULL; + ucs->rcvbuf_size = 0; + + spin_lock_init(&ucs->lock); + ucs->pending = 0; + + atomic_set(&ucs->basstate, 0); + init_timer(&ucs->timer_ctrl); + init_timer(&ucs->timer_atrdy); + init_timer(&ucs->timer_cmd_in); + + return 1; +} + +/* freeurbs + * unlink and deallocate all URBs unconditionally + * caller must make sure that no commands are still in progress + * parameter: + * cs controller state structure + */ +static void freeurbs(struct cardstate *cs) +{ + struct bas_cardstate *ucs; + struct bas_bc_state *ubc; + int i, j; + + IFNULLRET(cs); + ucs = cs->hw.bas; + IFNULLRET(ucs); + + for (j = 0; j < 2; ++j) { + ubc = cs->bcs[j].hw.bas; + IFNULLCONT(ubc); + for (i = 0; i < BAS_OUTURBS; ++i) + if (ubc->isoouturbs[i].urb) { + usb_kill_urb(ubc->isoouturbs[i].urb); + dbg(DEBUG_INIT, + "%s: isoc output URB %d/%d unlinked", + __func__, j, i); + usb_free_urb(ubc->isoouturbs[i].urb); + ubc->isoouturbs[i].urb = NULL; + } + for (i = 0; i < BAS_INURBS; ++i) + if (ubc->isoinurbs[i]) { + usb_kill_urb(ubc->isoinurbs[i]); + dbg(DEBUG_INIT, + "%s: isoc input URB %d/%d unlinked", + __func__, j, i); + usb_free_urb(ubc->isoinurbs[i]); + ubc->isoinurbs[i] = NULL; + } + } + if (ucs->urb_int_in) { + usb_kill_urb(ucs->urb_int_in); + dbg(DEBUG_INIT, "%s: interrupt input URB unlinked", __func__); + usb_free_urb(ucs->urb_int_in); + ucs->urb_int_in = NULL; + } + if (ucs->urb_cmd_out) { + usb_kill_urb(ucs->urb_cmd_out); + dbg(DEBUG_INIT, "%s: command output URB unlinked", __func__); + usb_free_urb(ucs->urb_cmd_out); + ucs->urb_cmd_out = NULL; + } + if (ucs->urb_cmd_in) { + usb_kill_urb(ucs->urb_cmd_in); + dbg(DEBUG_INIT, "%s: command input URB unlinked", __func__); + usb_free_urb(ucs->urb_cmd_in); + ucs->urb_cmd_in = NULL; + } + if (ucs->urb_ctrl) { + usb_kill_urb(ucs->urb_ctrl); + dbg(DEBUG_INIT, "%s: control output URB unlinked", __func__); + usb_free_urb(ucs->urb_ctrl); + ucs->urb_ctrl = NULL; + } +} + +/* gigaset_probe + * This function is called when a new USB device is connected. + * It checks whether the new device is handled by this driver. + */ +static int gigaset_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct usb_host_interface *hostif; + struct usb_device *udev = interface_to_usbdev(interface); + struct cardstate *cs = NULL; + struct bas_cardstate *ucs = NULL; + struct bas_bc_state *ubc; + struct usb_endpoint_descriptor *endpoint; + int i, j; + int ret; + + IFNULLRETVAL(udev, -ENODEV); + + dbg(DEBUG_ANY, + "%s: Check if device matches .. (Vendor: 0x%x, Product: 0x%x)", + __func__, le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct)); + + /* See if the device offered us matches what we can accept */ + if ((le16_to_cpu(udev->descriptor.idVendor) != USB_GIGA_VENDOR_ID) || + (le16_to_cpu(udev->descriptor.idProduct) != USB_GIGA_PRODUCT_ID && + le16_to_cpu(udev->descriptor.idProduct) != USB_4175_PRODUCT_ID && + le16_to_cpu(udev->descriptor.idProduct) != USB_SX303_PRODUCT_ID && + le16_to_cpu(udev->descriptor.idProduct) != USB_SX353_PRODUCT_ID)) { + dbg(DEBUG_ANY, "%s: unmatched ID - exiting", __func__); + return -ENODEV; + } + + /* set required alternate setting */ + hostif = interface->cur_altsetting; + if (hostif->desc.bAlternateSetting != 3) { + dbg(DEBUG_ANY, + "%s: wrong alternate setting %d - trying to switch", + __func__, hostif->desc.bAlternateSetting); + if (usb_set_interface(udev, hostif->desc.bInterfaceNumber, 3) < 0) { + warn("usb_set_interface failed, device %d interface %d altsetting %d", + udev->devnum, hostif->desc.bInterfaceNumber, + hostif->desc.bAlternateSetting); + return -ENODEV; + } + hostif = interface->cur_altsetting; + } + + /* Reject application specific interfaces + */ + if (hostif->desc.bInterfaceClass != 255) { + warn("%s: bInterfaceClass == %d", + __func__, hostif->desc.bInterfaceClass); + return -ENODEV; + } + + info("%s: Device matched (Vendor: 0x%x, Product: 0x%x)", + __func__, le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct)); + + cs = gigaset_getunassignedcs(driver); + if (!cs) { + err("%s: no free cardstate", __func__); + return -ENODEV; + } + ucs = cs->hw.bas; + ucs->udev = udev; + ucs->interface = interface; + + /* allocate URBs: + * - one for the interrupt pipe + * - three for the different uses of the default control pipe + * - three for each isochronous pipe + */ + ucs->urb_int_in = usb_alloc_urb(0, SLAB_KERNEL); + if (!ucs->urb_int_in) { + err("No free urbs available"); + goto error; + } + ucs->urb_cmd_in = usb_alloc_urb(0, SLAB_KERNEL); + if (!ucs->urb_cmd_in) { + err("No free urbs available"); + goto error; + } + ucs->urb_cmd_out = usb_alloc_urb(0, SLAB_KERNEL); + if (!ucs->urb_cmd_out) { + err("No free urbs available"); + goto error; + } + ucs->urb_ctrl = usb_alloc_urb(0, SLAB_KERNEL); + if (!ucs->urb_ctrl) { + err("No free urbs available"); + goto error; + } + + for (j = 0; j < 2; ++j) { + ubc = cs->bcs[j].hw.bas; + for (i = 0; i < BAS_OUTURBS; ++i) { + ubc->isoouturbs[i].urb = + usb_alloc_urb(BAS_NUMFRAMES, SLAB_KERNEL); + if (!ubc->isoouturbs[i].urb) { + err("No free urbs available"); + goto error; + } + } + for (i = 0; i < BAS_INURBS; ++i) { + ubc->isoinurbs[i] = + usb_alloc_urb(BAS_NUMFRAMES, SLAB_KERNEL); + if (!ubc->isoinurbs[i]) { + err("No free urbs available"); + goto error; + } + } + } + + ucs->rcvbuf = NULL; + ucs->rcvbuf_size = 0; + + /* Fill the interrupt urb and send it to the core */ + endpoint = &hostif->endpoint[0].desc; + usb_fill_int_urb(ucs->urb_int_in, udev, + usb_rcvintpipe(udev, + (endpoint->bEndpointAddress) & 0x0f), + ucs->int_in_buf, 3, read_int_callback, cs, + endpoint->bInterval); + ret = usb_submit_urb(ucs->urb_int_in, SLAB_KERNEL); + if (ret) { + err("could not submit interrupt URB: %s", get_usb_statmsg(ret)); + goto error; + } + + /* tell the device that the driver is ready */ + if ((ret = req_submit(cs->bcs, HD_DEVICE_INIT_ACK, 0, 0)) != 0) + goto error; + + /* tell common part that the device is ready */ + if (startmode == SM_LOCKED) + atomic_set(&cs->mstate, MS_LOCKED); + if (!gigaset_start(cs)) + goto error; + + /* save address of controller structure */ + usb_set_intfdata(interface, cs); + + /* set up device sysfs */ + gigaset_init_dev_sysfs(interface); + return 0; + +error: + freeurbs(cs); + gigaset_unassign(cs); + return -ENODEV; +} + +/* gigaset_disconnect + * This function is called when the Gigaset base is unplugged. + */ +static void gigaset_disconnect(struct usb_interface *interface) +{ + struct cardstate *cs; + struct bas_cardstate *ucs; + + /* clear device sysfs */ + gigaset_free_dev_sysfs(interface); + + cs = usb_get_intfdata(interface); + usb_set_intfdata(interface, NULL); + + IFNULLRET(cs); + ucs = cs->hw.bas; + IFNULLRET(ucs); + + info("disconnecting GigaSet base"); + gigaset_stop(cs); + freeurbs(cs); + kfree(ucs->rcvbuf); + ucs->rcvbuf = NULL; + ucs->rcvbuf_size = 0; + atomic_set(&ucs->basstate, 0); + gigaset_unassign(cs); +} + +static struct gigaset_ops gigops = { + gigaset_write_cmd, + gigaset_write_room, + gigaset_chars_in_buffer, + gigaset_brkchars, + gigaset_init_bchannel, + gigaset_close_bchannel, + gigaset_initbcshw, + gigaset_freebcshw, + gigaset_reinitbcshw, + gigaset_initcshw, + gigaset_freecshw, + gigaset_set_modem_ctrl, + gigaset_baud_rate, + gigaset_set_line_ctrl, + gigaset_isoc_send_skb, + gigaset_isoc_input, +}; + +/* bas_gigaset_init + * This function is called after the kernel module is loaded. + */ +static int __init bas_gigaset_init(void) +{ + int result; + + /* allocate memory for our driver state and intialize it */ + if ((driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS, + GIGASET_MODULENAME, GIGASET_DEVNAME, + GIGASET_DEVFSNAME, &gigops, + THIS_MODULE)) == NULL) + goto error; + + /* allocate memory for our device state and intialize it */ + cardstate = gigaset_initcs(driver, 2, 0, 0, cidmode, GIGASET_MODULENAME); + if (!cardstate) + goto error; + + /* register this driver with the USB subsystem */ + result = usb_register(&gigaset_usb_driver); + if (result < 0) { + err("usb_register failed (error %d)", -result); + goto error; + } + + info(DRIVER_AUTHOR); + info(DRIVER_DESC); + return 0; + +error: if (cardstate) + gigaset_freecs(cardstate); + cardstate = NULL; + if (driver) + gigaset_freedriver(driver); + driver = NULL; + return -1; +} + +/* bas_gigaset_exit + * This function is called before the kernel module is unloaded. + */ +static void __exit bas_gigaset_exit(void) +{ + gigaset_blockdriver(driver); /* => probe will fail + * => no gigaset_start any more + */ + + gigaset_shutdown(cardstate); + /* from now on, no isdn callback should be possible */ + + if (atomic_read(&cardstate->hw.bas->basstate) & BS_ATOPEN) { + dbg(DEBUG_ANY, "closing AT channel"); + if (req_submit(cardstate->bcs, + HD_CLOSE_ATCHANNEL, 0, BAS_TIMEOUT) >= 0) { + /* successfully submitted - wait for completion */ + //wait_event_interruptible(cs->initwait, !cs->hw.bas->pending); + //FIXME need own wait queue? wakeup? + } + } + + /* deregister this driver with the USB subsystem */ + usb_deregister(&gigaset_usb_driver); + /* this will call the disconnect-callback */ + /* from now on, no disconnect/probe callback should be running */ + + gigaset_freecs(cardstate); + cardstate = NULL; + gigaset_freedriver(driver); + driver = NULL; +} + + +module_init(bas_gigaset_init); +module_exit(bas_gigaset_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); -- cgit v1.2.3