From 2add87a95068d6457d4e5824d0417d39007665a4 Mon Sep 17 00:00:00 2001 From: Johannes Stezenbach Date: Mon, 16 May 2005 21:54:10 -0700 Subject: [PATCH] dvb: b2c2/flexcop driver refactoring part 2: add modular Flexcop driver b2c2/flexcop driver refactoring to support PCI and USB based cards part 2: add modular Flexcop driver Signed-off-by: Patrick Boettcher Signed-off-by: Johannes Stezenbach Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/media/dvb/b2c2/flexcop-fe-tuner.c | 403 ++++++++++++++++++++++++++++++ 1 file changed, 403 insertions(+) create mode 100644 drivers/media/dvb/b2c2/flexcop-fe-tuner.c (limited to 'drivers/media/dvb/b2c2/flexcop-fe-tuner.c') diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c new file mode 100644 index 00000000000..b3dd16fb5bb --- /dev/null +++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c @@ -0,0 +1,403 @@ +/* + * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III + * + * flexcop-fe-tuner.c - methods for attaching a frontend and controlling DiSEqC. + * + * see flexcop.c for copyright information. + */ +#include "flexcop.h" + +#include "stv0299.h" +#include "mt352.h" +#include "nxt2002.h" +#include "stv0297.h" +#include "mt312.h" + +/* lnb control */ + +static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + struct flexcop_device *fc = fe->dvb->priv; + flexcop_ibi_value v; + deb_tuner("polarity/voltage = %u\n", voltage); + + v = fc->read_ibi_reg(fc, misc_204); + switch (voltage) { + case SEC_VOLTAGE_OFF: + v.misc_204.ACPI1_sig = 1; + break; + case SEC_VOLTAGE_13: + v.misc_204.ACPI1_sig = 0; + v.misc_204.LNB_L_H_sig = 0; + break; + case SEC_VOLTAGE_18: + v.misc_204.ACPI1_sig = 0; + v.misc_204.LNB_L_H_sig = 1; + break; + default: + err("unknown SEC_VOLTAGE value"); + return -EINVAL; + } + return fc->write_ibi_reg(fc, misc_204, v); +} + +static int flexcop_sleep(struct dvb_frontend* fe) +{ + struct flexcop_device *fc = fe->dvb->priv; +/* flexcop_ibi_value v = fc->read_ibi_reg(fc,misc_204); */ + + if (fc->fe_sleep) + return fc->fe_sleep(fe); + +/* v.misc_204.ACPI3_sig = 1; + fc->write_ibi_reg(fc,misc_204,v);*/ + + return 0; +} + +static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) +{ + /* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */ + struct flexcop_device *fc = fe->dvb->priv; + flexcop_ibi_value v; + u16 ax; + v.raw = 0; + + deb_tuner("tone = %u\n",tone); + + switch (tone) { + case SEC_TONE_ON: + ax = 0x01ff; + break; + case SEC_TONE_OFF: + ax = 0; + break; + default: + err("unknown SEC_TONE value"); + return -EINVAL; + } + + v.lnb_switch_freq_200.LNB_CTLPrescaler_sig = 1; /* divide by 2 */ + + v.lnb_switch_freq_200.LNB_CTLHighCount_sig = + v.lnb_switch_freq_200.LNB_CTLLowCount_sig = ax; + + return fc->write_ibi_reg(fc,lnb_switch_freq_200,v); +} + +static void flexcop_diseqc_send_bit(struct dvb_frontend* fe, int data) +{ + flexcop_set_tone(fe, SEC_TONE_ON); + udelay(data ? 500 : 1000); + flexcop_set_tone(fe, SEC_TONE_OFF); + udelay(data ? 1000 : 500); +} + +static void flexcop_diseqc_send_byte(struct dvb_frontend* fe, int data) +{ + int i, par = 1, d; + + for (i = 7; i >= 0; i--) { + d = (data >> i) & 1; + par ^= d; + flexcop_diseqc_send_bit(fe, d); + } + + flexcop_diseqc_send_bit(fe, par); +} + +static int flexcop_send_diseqc_msg(struct dvb_frontend* fe, int len, u8 *msg, unsigned long burst) +{ + int i; + + flexcop_set_tone(fe, SEC_TONE_OFF); + mdelay(16); + + for (i = 0; i < len; i++) + flexcop_diseqc_send_byte(fe,msg[i]); + + mdelay(16); + + if (burst != -1) { + if (burst) + flexcop_diseqc_send_byte(fe, 0xff); + else { + flexcop_set_tone(fe, SEC_TONE_ON); + udelay(12500); + flexcop_set_tone(fe, SEC_TONE_OFF); + } + msleep(20); + } + return 0; +} + +static int flexcop_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd) +{ + return flexcop_send_diseqc_msg(fe, cmd->msg_len, cmd->msg, 0); +} + +static int flexcop_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd) +{ + return flexcop_send_diseqc_msg(fe, 0, NULL, minicmd); +} + +/* dvb-s stv0299 */ +static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio) +{ + u8 aclk = 0; + u8 bclk = 0; + + if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; } + else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; } + else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; } + else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; } + else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; } + else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; } + + stv0299_writereg (fe, 0x13, aclk); + stv0299_writereg (fe, 0x14, bclk); + stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff); + stv0299_writereg (fe, 0x20, (ratio >> 8) & 0xff); + stv0299_writereg (fe, 0x21, (ratio ) & 0xf0); + + return 0; +} + +static int samsung_tbmu24112_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) +{ + u8 buf[4]; + u32 div; + struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) }; + struct flexcop_device *fc = fe->dvb->priv; + + div = params->frequency / 125; + + buf[0] = (div >> 8) & 0x7f; + buf[1] = div & 0xff; + buf[2] = 0x84; /* 0xC4 */ + buf[3] = 0x08; + + if (params->frequency < 1500000) buf[3] |= 0x10; + + if (i2c_transfer(&fc->i2c_adap, &msg, 1) != 1) + return -EIO; + return 0; +} + +static u8 samsung_tbmu24112_inittab[] = { + 0x01, 0x15, + 0x02, 0x30, + 0x03, 0x00, + 0x04, 0x7D, + 0x05, 0x35, + 0x06, 0x02, + 0x07, 0x00, + 0x08, 0xC3, + 0x0C, 0x00, + 0x0D, 0x81, + 0x0E, 0x23, + 0x0F, 0x12, + 0x10, 0x7E, + 0x11, 0x84, + 0x12, 0xB9, + 0x13, 0x88, + 0x14, 0x89, + 0x15, 0xC9, + 0x16, 0x00, + 0x17, 0x5C, + 0x18, 0x00, + 0x19, 0x00, + 0x1A, 0x00, + 0x1C, 0x00, + 0x1D, 0x00, + 0x1E, 0x00, + 0x1F, 0x3A, + 0x20, 0x2E, + 0x21, 0x80, + 0x22, 0xFF, + 0x23, 0xC1, + 0x28, 0x00, + 0x29, 0x1E, + 0x2A, 0x14, + 0x2B, 0x0F, + 0x2C, 0x09, + 0x2D, 0x05, + 0x31, 0x1F, + 0x32, 0x19, + 0x33, 0xFE, + 0x34, 0x93, + 0xff, 0xff, +}; + +static struct stv0299_config samsung_tbmu24112_config = { + .demod_address = 0x68, + .inittab = samsung_tbmu24112_inittab, + .mclk = 88000000UL, + .invert = 0, + .enhanced_tuning = 0, + .skip_reinit = 0, + .lock_output = STV0229_LOCKOUTPUT_LK, + .volt13_op0_op1 = STV0299_VOLT13_OP1, + .min_delay_ms = 100, + .set_symbol_rate = samsung_tbmu24112_set_symbol_rate, + .pll_set = samsung_tbmu24112_pll_set, +}; + +/* dvb-t mt352 */ +static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe) +{ + static u8 mt352_clock_config [] = { 0x89, 0x18, 0x2d }; + static u8 mt352_reset [] = { 0x50, 0x80 }; + static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 }; + static u8 mt352_agc_cfg [] = { 0x67, 0x28, 0xa1 }; + static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 }; + + mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config)); + udelay(2000); + mt352_write(fe, mt352_reset, sizeof(mt352_reset)); + mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg)); + + mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg)); + mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg)); + + return 0; +} + +static int samsung_tdtc9251dh0_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u8* pllbuf) +{ + u32 div; + unsigned char bs = 0; + + #define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */ + div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6; + + if (params->frequency >= 48000000 && params->frequency <= 154000000) bs = 0x09; + if (params->frequency >= 161000000 && params->frequency <= 439000000) bs = 0x0a; + if (params->frequency >= 447000000 && params->frequency <= 863000000) bs = 0x08; + + pllbuf[0] = 0xc2; /* Note: non-linux standard PLL i2c address */ + pllbuf[1] = div >> 8; + pllbuf[2] = div & 0xff; + pllbuf[3] = 0xcc; + pllbuf[4] = bs; + + return 0; +} + +static struct mt352_config samsung_tdtc9251dh0_config = { + + .demod_address = 0x0f, + .demod_init = samsung_tdtc9251dh0_demod_init, + .pll_set = samsung_tdtc9251dh0_pll_set, +}; + +static int nxt2002_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name) +{ + struct flexcop_device *fc = fe->dvb->priv; + return request_firmware(fw, name, fc->dev); +} + +static struct nxt2002_config samsung_tbmv_config = { + .demod_address = 0x0a, + .request_firmware = nxt2002_request_firmware, +}; + +static int skystar23_samsung_tbdu18132_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) +{ + u8 buf[4]; + u32 div; + struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) }; + struct flexcop_device *fc = fe->dvb->priv; + + div = (params->frequency + (125/2)) / 125; + + buf[0] = (div >> 8) & 0x7f; + buf[1] = (div >> 0) & 0xff; + buf[2] = 0x84 | ((div >> 10) & 0x60); + buf[3] = 0x80; + + if (params->frequency < 1550000) + buf[3] |= 0x02; + + if (i2c_transfer(&fc->i2c_adap, &msg, 1) != 1) + return -EIO; + return 0; +} + +static struct mt312_config skystar23_samsung_tbdu18132_config = { + + .demod_address = 0x0e, + .pll_set = skystar23_samsung_tbdu18132_pll_set, +}; + +static struct stv0297_config alps_tdee4_stv0297_config = { + .demod_address = 0x1c, +// .invert = 1, +// .pll_set = alps_tdee4_stv0297_pll_set, +}; + +/* try to figure out the frontend, each card/box can have on of the following list */ +int flexcop_frontend_init(struct flexcop_device *fc) +{ + /* try the sky v2.6 (stv0299/Samsung tbmu24112(sl1935)) */ + if ((fc->fe = stv0299_attach(&samsung_tbmu24112_config, &fc->i2c_adap)) != NULL) { + fc->fe->ops->set_voltage = flexcop_set_voltage; + + fc->fe_sleep = fc->fe->ops->sleep; + fc->fe->ops->sleep = flexcop_sleep; + + fc->dev_type = FC_SKY; + info("found the stv0299 at i2c address: 0x%02x",samsung_tbmu24112_config.demod_address); + } else + /* try the air dvb-t (mt352/Samsung tdtc9251dh0(??)) */ + if ((fc->fe = mt352_attach(&samsung_tdtc9251dh0_config, &fc->i2c_adap)) != NULL ) { + fc->dev_type = FC_AIR_DVB; + info("found the mt352 at i2c address: 0x%02x",samsung_tdtc9251dh0_config.demod_address); + } else + /* try the air atsc (nxt2002) */ + if ((fc->fe = nxt2002_attach(&samsung_tbmv_config, &fc->i2c_adap)) != NULL) { + fc->dev_type = FC_AIR_ATSC; + info("found the nxt2002 at i2c address: 0x%02x",samsung_tbmv_config.demod_address); + } else + /* try the cable dvb (stv0297) */ + if ((fc->fe = stv0297_attach(&alps_tdee4_stv0297_config, &fc->i2c_adap, 0xf8)) != NULL) { + fc->dev_type = FC_CABLE; + info("found the stv0297 at i2c address: 0x%02x",alps_tdee4_stv0297_config.demod_address); + } else + /* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */ + if ((fc->fe = vp310_attach(&skystar23_samsung_tbdu18132_config, &fc->i2c_adap)) != NULL) { + fc->fe->ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd; + fc->fe->ops->diseqc_send_burst = flexcop_diseqc_send_burst; + fc->fe->ops->set_tone = flexcop_set_tone; + fc->fe->ops->set_voltage = flexcop_set_voltage; + + fc->fe_sleep = fc->fe->ops->sleep; + fc->fe->ops->sleep = flexcop_sleep; + + fc->dev_type = FC_SKY_OLD; + info("found the vp310 (aka mt312) at i2c address: 0x%02x",skystar23_samsung_tbdu18132_config.demod_address); + } + + if (fc->fe == NULL) { + err("no frontend driver found for this B2C2/FlexCop adapter"); + return -ENODEV; + } else { + if (dvb_register_frontend(&fc->dvb_adapter, fc->fe)) { + err("frontend registration failed!"); + if (fc->fe->ops->release != NULL) + fc->fe->ops->release(fc->fe); + fc->fe = NULL; + return -EINVAL; + } + } + fc->init_state |= FC_STATE_FE_INIT; + return 0; +} + +void flexcop_frontend_exit(struct flexcop_device *fc) +{ + if (fc->init_state & FC_STATE_FE_INIT) + dvb_unregister_frontend(fc->fe); + + fc->init_state &= ~FC_STATE_FE_INIT; +} -- cgit v1.2.3