From 6cffcc23d2837295604033d884d1ad259d0aed57 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Tue, 8 Nov 2005 21:38:36 -0800 Subject: [PATCH] v4l: 896: rename BTTV_FOO --> BTTV_BOARD_FOO Adapt to changes in v4l tree: rename BTTV_FOO --> BTTV_BOARD_FOO Signed-off-by: Michael Krufky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/media/dvb/bt8xx/dvb-bt8xx.c | 48 ++++++++++++++++++------------------- 1 file changed, 24 insertions(+), 24 deletions(-) (limited to 'drivers/media/dvb/bt8xx') diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.c b/drivers/media/dvb/bt8xx/dvb-bt8xx.c index 05554e3949d..2e398090cf6 100644 --- a/drivers/media/dvb/bt8xx/dvb-bt8xx.c +++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.c @@ -600,8 +600,8 @@ static void frontend_init(struct dvb_bt8xx_card *card, u32 type) struct dst_state* state = NULL; switch(type) { -#ifdef BTTV_DVICO_DVBT_LITE - case BTTV_DVICO_DVBT_LITE: +#ifdef BTTV_BOARD_DVICO_DVBT_LITE + case BTTV_BOARD_DVICO_DVBT_LITE: card->fe = mt352_attach(&thomson_dtt7579_config, card->i2c_adapter); if (card->fe != NULL) { card->fe->ops->info.frequency_min = 174000000; @@ -610,8 +610,8 @@ static void frontend_init(struct dvb_bt8xx_card *card, u32 type) break; #endif -#ifdef BTTV_DVICO_FUSIONHDTV_5_LITE - case BTTV_DVICO_FUSIONHDTV_5_LITE: +#ifdef BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE + case BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE: lgdt330x_reset(card); card->fe = lgdt330x_attach(&tdvs_tua6034_config, card->i2c_adapter); if (card->fe != NULL) @@ -619,10 +619,10 @@ static void frontend_init(struct dvb_bt8xx_card *card, u32 type) break; #endif -#ifdef BTTV_TWINHAN_VP3021 - case BTTV_TWINHAN_VP3021: +#ifdef BTTV_BOARD_TWINHAN_VP3021 + case BTTV_BOARD_TWINHAN_VP3021: #else - case BTTV_NEBULA_DIGITV: + case BTTV_BOARD_NEBULA_DIGITV: #endif /* * It is possible to determine the correct frontend using the I2C bus (see the Nebula SDK); @@ -645,11 +645,11 @@ static void frontend_init(struct dvb_bt8xx_card *card, u32 type) dprintk ("dvb_bt8xx: an mt352 was detected on your digitv card\n"); break; - case BTTV_AVDVBT_761: + case BTTV_BOARD_AVDVBT_761: card->fe = sp887x_attach(µtune_mt7202dtf_config, card->i2c_adapter); break; - case BTTV_AVDVBT_771: + case BTTV_BOARD_AVDVBT_771: card->fe = mt352_attach(&advbt771_samsung_tdtc9251dh0_config, card->i2c_adapter); if (card->fe != NULL) { card->fe->ops->info.frequency_min = 174000000; @@ -657,7 +657,7 @@ static void frontend_init(struct dvb_bt8xx_card *card, u32 type) } break; - case BTTV_TWINHAN_DST: + case BTTV_BOARD_TWINHAN_DST: /* DST is not a frontend driver !!! */ state = (struct dst_state *) kmalloc(sizeof (struct dst_state), GFP_KERNEL); /* Setup the Card */ @@ -678,11 +678,11 @@ static void frontend_init(struct dvb_bt8xx_card *card, u32 type) ret = dst_ca_attach(state, &card->dvb_adapter); break; - case BTTV_PINNACLESAT: + case BTTV_BOARD_PINNACLESAT: card->fe = cx24110_attach(&pctvsat_config, card->i2c_adapter); break; - case BTTV_PC_HDTV: + case BTTV_BOARD_PC_HDTV: card->fe = or51211_attach(&or51211_config, card->i2c_adapter); break; } @@ -804,7 +804,7 @@ static int dvb_bt8xx_probe(struct device *dev) card->i2c_adapter = &sub->core->i2c_adap; switch(sub->core->type) { - case BTTV_PINNACLESAT: + case BTTV_BOARD_PINNACLESAT: card->gpio_mode = 0x0400c060; /* should be: BT878_A_GAIN=0,BT878_A_PWRDN,BT878_DA_DPM,BT878_DA_SBR, BT878_DA_IOM=1,BT878_DA_APP to enable serial highspeed mode. */ @@ -812,8 +812,8 @@ static int dvb_bt8xx_probe(struct device *dev) card->irq_err_ignore = 0; break; -#ifdef BTTV_DVICO_DVBT_LITE - case BTTV_DVICO_DVBT_LITE: +#ifdef BTTV_BOARD_DVICO_DVBT_LITE + case BTTV_BOARD_DVICO_DVBT_LITE: #endif card->gpio_mode = 0x0400C060; card->op_sync_orin = 0; @@ -823,34 +823,34 @@ static int dvb_bt8xx_probe(struct device *dev) * DA_APP(parallel) */ break; -#ifdef BTTV_DVICO_FUSIONHDTV_5_LITE - case BTTV_DVICO_FUSIONHDTV_5_LITE: +#ifdef BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE + case BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE: #endif card->gpio_mode = 0x0400c060; card->op_sync_orin = BT878_RISC_SYNC_MASK; card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR; break; -#ifdef BTTV_TWINHAN_VP3021 - case BTTV_TWINHAN_VP3021: +#ifdef BTTV_BOARD_TWINHAN_VP3021 + case BTTV_BOARD_TWINHAN_VP3021: #else - case BTTV_NEBULA_DIGITV: + case BTTV_BOARD_NEBULA_DIGITV: #endif - case BTTV_AVDVBT_761: + case BTTV_BOARD_AVDVBT_761: card->gpio_mode = (1 << 26) | (1 << 14) | (1 << 5); card->op_sync_orin = 0; card->irq_err_ignore = 0; /* A_PWRDN DA_SBR DA_APP (high speed serial) */ break; - case BTTV_AVDVBT_771: //case 0x07711461: + case BTTV_BOARD_AVDVBT_771: //case 0x07711461: card->gpio_mode = 0x0400402B; card->op_sync_orin = BT878_RISC_SYNC_MASK; card->irq_err_ignore = 0; /* A_PWRDN DA_SBR DA_APP[0] PKTP=10 RISC_ENABLE FIFO_ENABLE*/ break; - case BTTV_TWINHAN_DST: + case BTTV_BOARD_TWINHAN_DST: card->gpio_mode = 0x2204f2c; card->op_sync_orin = BT878_RISC_SYNC_MASK; card->irq_err_ignore = BT878_APABORT | BT878_ARIPERR | @@ -868,7 +868,7 @@ static int dvb_bt8xx_probe(struct device *dev) * RISC+FIFO ENABLE */ break; - case BTTV_PC_HDTV: + case BTTV_BOARD_PC_HDTV: card->gpio_mode = 0x0100EC7B; card->op_sync_orin = 0; card->irq_err_ignore = 0; -- cgit v1.2.3