From 206313db83641022c5ee213ac5f619973a9b427b Mon Sep 17 00:00:00 2001
From: Devin Heitmueller <dheitmueller@kernellabs.com>
Date: Mon, 31 Aug 2009 23:23:03 -0300
Subject: V4L/DVB (12740): em28xx: better describe vinctrl registers

Properly document the video input control register, in preparation for the
addition of VBI support.  Note this patch makes no functional changes.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/em28xx/em28xx-cards.c |  3 ++-
 drivers/media/video/em28xx/em28xx-reg.h   | 12 ++++++++++++
 2 files changed, 14 insertions(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 7e3c78239fa..cc807232b82 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -2570,7 +2570,8 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 	 * Default format, used for tvp5150 or saa711x output formats
 	 */
 	dev->vinmode = 0x10;
-	dev->vinctl  = 0x11;
+	dev->vinctl  = EM28XX_VINCTRL_INTERLACED |
+		       EM28XX_VINCTRL_CCIR656_ENABLE;
 
 	/* Do board specific init and eeprom reading */
 	em28xx_card_setup(dev);
diff --git a/drivers/media/video/em28xx/em28xx-reg.h b/drivers/media/video/em28xx/em28xx-reg.h
index 6bf84bd787d..3bf69f9ec37 100644
--- a/drivers/media/video/em28xx/em28xx-reg.h
+++ b/drivers/media/video/em28xx/em28xx-reg.h
@@ -86,7 +86,19 @@
 #define EM28XX_XCLK_FREQUENCY_24MHZ	0x0b
 
 #define EM28XX_R10_VINMODE	0x10
+
 #define EM28XX_R11_VINCTRL	0x11
+
+/* em28xx Video Input Control Register 0x11 */
+#define EM28XX_VINCTRL_VBI_SLICED	0x80
+#define EM28XX_VINCTRL_VBI_RAW		0x40
+#define EM28XX_VINCTRL_VOUT_MODE_IN	0x20 /* HREF,VREF,VACT in output */
+#define EM28XX_VINCTRL_CCIR656_ENABLE	0x10
+#define EM28XX_VINCTRL_VBI_16BIT_RAW	0x08 /* otherwise 8-bit raw */
+#define EM28XX_VINCTRL_FID_ON_HREF	0x04
+#define EM28XX_VINCTRL_DUAL_EDGE_STROBE	0x02
+#define EM28XX_VINCTRL_INTERLACED	0x01
+
 #define EM28XX_R12_VINENABLE	0x12	/* */
 
 #define EM28XX_R14_GAMMA	0x14
-- 
cgit v1.2.3


From da52a55cff643b8e0b346b9894adf5b93946040d Mon Sep 17 00:00:00 2001
From: Devin Heitmueller <dheitmueller@kernellabs.com>
Date: Tue, 1 Sep 2009 01:19:46 -0300
Subject: V4L/DVB (12741): em28xx: make video isoc stream work when VBI is
 enabled

Add code enabling the VBI registers for variants of the em28xx chip that
support VBI, and make sure the isoc streaming code continues to work for
the video component of the stream (note the video and vbi data arrive
intermixed on the same isoc pipe).

Note that this version just drops the actual VBI data onto the floor as
opposed to processing it.  The "#ifdef 0" tags are for the videobuf code that
appears in the next patch in this series.

We created a separate version of the isoc_copy version for parsing the version
of the stream that includes VBI data.  In theory, they might be able to be
merged at some point in the future, but the initial goal is to ensure that we
do not cause any regressions with devices that do not have VBI support.

This work was sponsored by EyeMagnet Limited.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/em28xx/em28xx-core.c  |  44 +++++++++--
 drivers/media/video/em28xx/em28xx-reg.h   |   4 +
 drivers/media/video/em28xx/em28xx-video.c | 127 +++++++++++++++++++++++++++++-
 drivers/media/video/em28xx/em28xx.h       |   7 ++
 4 files changed, 173 insertions(+), 9 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c
index 98e140b5d95..d4107f6933f 100644
--- a/drivers/media/video/em28xx/em28xx-core.c
+++ b/drivers/media/video/em28xx/em28xx-core.c
@@ -54,6 +54,10 @@ static int alt = EM28XX_PINOUT;
 module_param(alt, int, 0644);
 MODULE_PARM_DESC(alt, "alternate setting to use for video endpoint");
 
+static unsigned int disable_vbi;
+module_param(disable_vbi, int, 0644);
+MODULE_PARM_DESC(disable_vbi, "disable vbi support");
+
 /* FIXME */
 #define em28xx_isocdbg(fmt, arg...) do {\
 	if (core_debug) \
@@ -648,9 +652,24 @@ int em28xx_capture_start(struct em28xx *dev, int start)
 	return rc;
 }
 
+int em28xx_vbi_supported(struct em28xx *dev)
+{
+	/* Modprobe option to manually disable */
+	if (disable_vbi == 1)
+		return 0;
+
+	if (dev->chip_id == CHIP_ID_EM2860 ||
+	    dev->chip_id == CHIP_ID_EM2883)
+		return 1;
+
+	/* Version of em28xx that does not support VBI */
+	return 0;
+}
+
 int em28xx_set_outfmt(struct em28xx *dev)
 {
 	int ret;
+	u8 vinctrl;
 
 	ret = em28xx_write_reg_bits(dev, EM28XX_R27_OUTFMT,
 				dev->format->reg | 0x20, 0xff);
@@ -661,7 +680,16 @@ int em28xx_set_outfmt(struct em28xx *dev)
 	if (ret < 0)
 		return ret;
 
-	return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, dev->vinctl);
+	vinctrl = dev->vinctl;
+	if (em28xx_vbi_supported(dev) == 1) {
+		vinctrl |= EM28XX_VINCTRL_VBI_RAW;
+		em28xx_write_reg(dev, EM28XX_R34_VBI_START_H, 0x00);
+		em28xx_write_reg(dev, EM28XX_R35_VBI_START_V, 0x09);
+		em28xx_write_reg(dev, EM28XX_R36_VBI_WIDTH, 0xb4);
+		em28xx_write_reg(dev, EM28XX_R37_VBI_HEIGHT, 0x0c);
+	}
+
+	return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, vinctrl);
 }
 
 static int em28xx_accumulator_set(struct em28xx *dev, u8 xmin, u8 xmax,
@@ -732,7 +760,14 @@ int em28xx_resolution_set(struct em28xx *dev)
 
 
 	em28xx_accumulator_set(dev, 1, (width - 4) >> 2, 1, (height - 4) >> 2);
-	em28xx_capture_area_set(dev, 0, 0, width >> 2, height >> 2);
+
+	/* If we don't set the start position to 4 in VBI mode, we end up
+	   with line 21 being YUYV encoded instead of being in 8-bit
+	   greyscale */
+	if (em28xx_vbi_supported(dev) == 1)
+		em28xx_capture_area_set(dev, 0, 4, width >> 2, height >> 2);
+	else
+		em28xx_capture_area_set(dev, 0, 0, width >> 2, height >> 2);
 
 	return em28xx_scaler_set(dev, dev->hscale, dev->vscale);
 }
@@ -844,8 +879,7 @@ EXPORT_SYMBOL_GPL(em28xx_set_mode);
  */
 static void em28xx_irq_callback(struct urb *urb)
 {
-	struct em28xx_dmaqueue  *dma_q = urb->context;
-	struct em28xx *dev = container_of(dma_q, struct em28xx, vidq);
+	struct em28xx *dev = urb->context;
 	int rc, i;
 
 	switch (urb->status) {
@@ -994,7 +1028,7 @@ int em28xx_init_isoc(struct em28xx *dev, int max_packets,
 
 		usb_fill_int_urb(urb, dev->udev, pipe,
 				 dev->isoc_ctl.transfer_buffer[i], sb_size,
-				 em28xx_irq_callback, dma_q, 1);
+				 em28xx_irq_callback, dev, 1);
 
 		urb->number_of_packets = max_packets;
 		urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
diff --git a/drivers/media/video/em28xx/em28xx-reg.h b/drivers/media/video/em28xx/em28xx-reg.h
index 3bf69f9ec37..ed12e7ffcbd 100644
--- a/drivers/media/video/em28xx/em28xx-reg.h
+++ b/drivers/media/video/em28xx/em28xx-reg.h
@@ -147,6 +147,10 @@
 #define EM28XX_R31_HSCALEHIGH	0x31
 #define EM28XX_R32_VSCALELOW	0x32
 #define EM28XX_R33_VSCALEHIGH	0x33
+#define EM28XX_R34_VBI_START_H	0x34
+#define EM28XX_R35_VBI_START_V	0x35
+#define EM28XX_R36_VBI_WIDTH	0x36
+#define EM28XX_R37_VBI_HEIGHT	0x37
 
 #define EM28XX_R40_AC97LSB	0x40
 #define EM28XX_R41_AC97MSB	0x41
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index a6bdbc21410..04c9ecc3c22 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -329,7 +329,7 @@ static inline void get_next_buf(struct em28xx_dmaqueue *dma_q,
 static inline int em28xx_isoc_copy(struct em28xx *dev, struct urb *urb)
 {
 	struct em28xx_buffer    *buf;
-	struct em28xx_dmaqueue  *dma_q = urb->context;
+	struct em28xx_dmaqueue  *dma_q = &dev->vidq;
 	unsigned char *outp = NULL;
 	int i, len = 0, rc = 1;
 	unsigned char *p;
@@ -410,6 +410,118 @@ static inline int em28xx_isoc_copy(struct em28xx *dev, struct urb *urb)
 	return rc;
 }
 
+/* Version of isoc handler that takes into account a mixture of video and
+   VBI data */
+static inline int em28xx_isoc_copy_vbi(struct em28xx *dev, struct urb *urb)
+{
+	struct em28xx_buffer    *buf, *vbi_buf;
+	struct em28xx_dmaqueue  *dma_q = &dev->vidq;
+	unsigned char *outp = NULL;
+	unsigned char *vbioutp = NULL;
+	int i, len = 0, rc = 1;
+	unsigned char *p;
+	int vbi_size;
+
+	if (!dev)
+		return 0;
+
+	if ((dev->state & DEV_DISCONNECTED) || (dev->state & DEV_MISCONFIGURED))
+		return 0;
+
+	if (urb->status < 0) {
+		print_err_status(dev, -1, urb->status);
+		if (urb->status == -ENOENT)
+			return 0;
+	}
+
+	buf = dev->isoc_ctl.buf;
+	if (buf != NULL)
+		outp = videobuf_to_vmalloc(&buf->vb);
+	for (i = 0; i < urb->number_of_packets; i++) {
+		int status = urb->iso_frame_desc[i].status;
+
+		if (status < 0) {
+			print_err_status(dev, i, status);
+			if (urb->iso_frame_desc[i].status != -EPROTO)
+				continue;
+		}
+
+		len = urb->iso_frame_desc[i].actual_length - 4;
+
+		if (urb->iso_frame_desc[i].actual_length <= 0) {
+			/* em28xx_isocdbg("packet %d is empty",i); - spammy */
+			continue;
+		}
+		if (urb->iso_frame_desc[i].actual_length >
+						dev->max_pkt_size) {
+			em28xx_isocdbg("packet bigger than packet size");
+			continue;
+		}
+
+		p = urb->transfer_buffer + urb->iso_frame_desc[i].offset;
+
+		/* capture type 0 = vbi start
+		   capture type 1 = video start
+		   capture type 2 = video in progress */
+		if (p[0] == 0x33 && p[1] == 0x95) {
+			dev->capture_type = 0;
+			dev->vbi_read = 0;
+			em28xx_isocdbg("VBI START HEADER!!!\n");
+			dev->cur_field = p[2];
+		}
+
+		/* FIXME: get rid of hard-coded value */
+		vbi_size = 720 * 0x0c;
+
+		if (dev->capture_type == 0) {
+			if (dev->vbi_read >= vbi_size) {
+				/* We've already read all the VBI data, so
+				   treat the rest as video */
+				printk("djh c should never happen\n");
+			} else if ((dev->vbi_read + len) < vbi_size) {
+				/* This entire frame is VBI data */
+				dev->vbi_read += len;
+			} else {
+				/* Some of this frame is VBI data and some is
+				   video data */
+				int vbi_data_len = vbi_size - dev->vbi_read;
+				dev->vbi_read += vbi_data_len;
+				dev->capture_type = 1;
+				p += vbi_data_len;
+				len -= vbi_data_len;
+			}
+		}
+
+		if (dev->capture_type == 1) {
+			dev->capture_type = 2;
+			em28xx_isocdbg("Video frame %d, length=%i, %s\n", p[2],
+				       len, (p[2] & 1) ? "odd" : "even");
+
+			if (dev->progressive || !(dev->cur_field & 1)) {
+				if (buf != NULL)
+					buffer_filled(dev, dma_q, buf);
+				get_next_buf(dma_q, &buf);
+				if (buf == NULL)
+					outp = NULL;
+				else
+					outp = videobuf_to_vmalloc(&buf->vb);
+			}
+			if (buf != NULL) {
+				if (dev->cur_field & 1)
+					buf->top_field = 0;
+				else
+					buf->top_field = 1;
+			}
+
+			dma_q->pos = 0;
+		}
+		if (buf != NULL && dev->capture_type == 2)
+			em28xx_copy_video(dev, dma_q, buf, p, outp, len);
+	}
+	return rc;
+}
+
+
 /* ------------------------------------------------------------------
 	Videobuf operations
    ------------------------------------------------------------------*/
@@ -494,9 +606,16 @@ buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb,
 		urb_init = 1;
 
 	if (urb_init) {
-		rc = em28xx_init_isoc(dev, EM28XX_NUM_PACKETS,
-				      EM28XX_NUM_BUFS, dev->max_pkt_size,
-				      em28xx_isoc_copy);
+		if (em28xx_vbi_supported(dev) == 1)
+			rc = em28xx_init_isoc(dev, EM28XX_NUM_PACKETS,
+					      EM28XX_NUM_BUFS,
+					      dev->max_pkt_size,
+					      em28xx_isoc_copy_vbi);
+		else
+			rc = em28xx_init_isoc(dev, EM28XX_NUM_PACKETS,
+					      EM28XX_NUM_BUFS,
+					      dev->max_pkt_size,
+					      em28xx_isoc_copy);
 		if (rc < 0)
 			goto fail;
 	}
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index 0f2ba9a40d1..1656d2cf34a 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -544,6 +544,12 @@ struct em28xx {
 	enum em28xx_dev_state state;
 	enum em28xx_io_method io;
 
+	/* vbi related state tracking */
+	int capture_type;
+	int vbi_read;
+	unsigned char cur_field;
+
+
 	struct work_struct         request_module_wk;
 
 	/* locks */
@@ -639,6 +645,7 @@ int em28xx_audio_setup(struct em28xx *dev);
 
 int em28xx_colorlevels_set_default(struct em28xx *dev);
 int em28xx_capture_start(struct em28xx *dev, int start);
+int em28xx_vbi_supported(struct em28xx *dev);
 int em28xx_set_outfmt(struct em28xx *dev);
 int em28xx_resolution_set(struct em28xx *dev);
 int em28xx_set_alternate(struct em28xx *dev);
-- 
cgit v1.2.3


From 28abf083d356bc4ec459ded7a95b6a22a20f6c3d Mon Sep 17 00:00:00 2001
From: Devin Heitmueller <dheitmueller@kernellabs.com>
Date: Tue, 1 Sep 2009 01:54:54 -0300
Subject: V4L/DVB (12742): em28xx: add raw VBI support for NTSC

Add support for raw VBI capture for the em28xx bridge, currently only for
NTSC.  Support for PAL capture to follow shortly (including the removal of
numerous hard-coded NTSC-specific sizes for capture buffers, etc).

Note that the code currently changes the default current norm from PAL to
NTSC (so that zvbi-ntsc-cc works properly).  The default norm really should
be moved into a board-level parameter.

This work was sponsored by EyeMagnet Limited.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/em28xx/Makefile       |   2 +-
 drivers/media/video/em28xx/em28xx-cards.c |   2 +
 drivers/media/video/em28xx/em28xx-core.c  |   5 +-
 drivers/media/video/em28xx/em28xx-vbi.c   | 150 ++++++++++++++++
 drivers/media/video/em28xx/em28xx-video.c | 290 +++++++++++++++++++++++++++---
 drivers/media/video/em28xx/em28xx.h       |   8 +-
 6 files changed, 430 insertions(+), 27 deletions(-)
 create mode 100644 drivers/media/video/em28xx/em28xx-vbi.c

(limited to 'drivers/media')

diff --git a/drivers/media/video/em28xx/Makefile b/drivers/media/video/em28xx/Makefile
index 8137a8c94bf..d0f093d1d0d 100644
--- a/drivers/media/video/em28xx/Makefile
+++ b/drivers/media/video/em28xx/Makefile
@@ -1,5 +1,5 @@
 em28xx-objs     := em28xx-video.o em28xx-i2c.o em28xx-cards.o em28xx-core.o \
-		   em28xx-input.o
+		   em28xx-input.o em28xx-vbi.o
 
 em28xx-alsa-objs := em28xx-audio.o
 
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index cc807232b82..2479c6f8641 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -2590,6 +2590,8 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 	/* init video dma queues */
 	INIT_LIST_HEAD(&dev->vidq.active);
 	INIT_LIST_HEAD(&dev->vidq.queued);
+	INIT_LIST_HEAD(&dev->vbiq.active);
+	INIT_LIST_HEAD(&dev->vbiq.queued);
 
 
 	if (dev->board.has_msp34xx) {
diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c
index d4107f6933f..3128b7fce07 100644
--- a/drivers/media/video/em28xx/em28xx-core.c
+++ b/drivers/media/video/em28xx/em28xx-core.c
@@ -964,6 +964,7 @@ int em28xx_init_isoc(struct em28xx *dev, int max_packets,
 		     int (*isoc_copy) (struct em28xx *dev, struct urb *urb))
 {
 	struct em28xx_dmaqueue *dma_q = &dev->vidq;
+	struct em28xx_dmaqueue *vbi_dma_q = &dev->vbiq;
 	int i;
 	int sb_size, pipe;
 	struct urb *urb;
@@ -993,7 +994,8 @@ int em28xx_init_isoc(struct em28xx *dev, int max_packets,
 	}
 
 	dev->isoc_ctl.max_pkt_size = max_pkt_size;
-	dev->isoc_ctl.buf = NULL;
+	dev->isoc_ctl.vid_buf = NULL;
+	dev->isoc_ctl.vbi_buf = NULL;
 
 	sb_size = max_packets * dev->isoc_ctl.max_pkt_size;
 
@@ -1043,6 +1045,7 @@ int em28xx_init_isoc(struct em28xx *dev, int max_packets,
 	}
 
 	init_waitqueue_head(&dma_q->wq);
+	init_waitqueue_head(&vbi_dma_q->wq);
 
 	em28xx_capture_start(dev, 1);
 
diff --git a/drivers/media/video/em28xx/em28xx-vbi.c b/drivers/media/video/em28xx/em28xx-vbi.c
new file mode 100644
index 00000000000..b5802d4cb62
--- /dev/null
+++ b/drivers/media/video/em28xx/em28xx-vbi.c
@@ -0,0 +1,150 @@
+/*
+   em28xx-vbi.c - VBI driver for em28xx
+
+   Copyright (C) 2009 Devin Heitmueller <dheitmueller@kernellabs.com>
+
+   This work was sponsored by EyeMagnet Limited.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+   02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+
+#include "em28xx.h"
+
+static unsigned int vbibufs = 5;
+module_param(vbibufs,int,0644);
+MODULE_PARM_DESC(vbibufs,"number of vbi buffers, range 2-32");
+
+static unsigned int vbi_debug;
+module_param(vbi_debug,int,0644);
+MODULE_PARM_DESC(vbi_debug,"enable debug messages [vbi]");
+
+#define dprintk(level,fmt, arg...)	if (vbi_debug >= level) \
+	printk(KERN_DEBUG "%s: " fmt, dev->core->name , ## arg)
+
+/* ------------------------------------------------------------------ */
+
+static void
+free_buffer(struct videobuf_queue *vq, struct em28xx_buffer *buf)
+{
+	struct em28xx_fh     *fh  = vq->priv_data;
+	struct em28xx        *dev = fh->dev;
+	unsigned long flags = 0;
+	if (in_interrupt())
+		BUG();
+
+	/* We used to wait for the buffer to finish here, but this didn't work
+	   because, as we were keeping the state as VIDEOBUF_QUEUED,
+	   videobuf_queue_cancel marked it as finished for us.
+	   (Also, it could wedge forever if the hardware was misconfigured.)
+
+	   This should be safe; by the time we get here, the buffer isn't
+	   queued anymore. If we ever start marking the buffers as
+	   VIDEOBUF_ACTIVE, it won't be, though.
+	*/
+	spin_lock_irqsave(&dev->slock, flags);
+	if (dev->isoc_ctl.vbi_buf == buf)
+		dev->isoc_ctl.vbi_buf = NULL;
+	spin_unlock_irqrestore(&dev->slock, flags);
+
+	videobuf_vmalloc_free(&buf->vb);
+	buf->vb.state = VIDEOBUF_NEEDS_INIT;
+}
+
+static int
+vbi_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size)
+{
+	*size = 720 * 12 * 2;
+	if (0 == *count)
+		*count = vbibufs;
+	if (*count < 2)
+		*count = 2;
+	if (*count > 32)
+		*count = 32;
+	return 0;
+}
+
+static int
+vbi_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,
+	    enum v4l2_field field)
+{
+	struct em28xx_fh     *fh  = q->priv_data;
+	struct em28xx_buffer *buf = container_of(vb, struct em28xx_buffer, vb);
+	int                  rc = 0;
+	unsigned int size;
+
+	size = 720 * 12 * 2;
+
+	buf->vb.size = size;
+
+	if (0 != buf->vb.baddr  &&  buf->vb.bsize < buf->vb.size)
+		return -EINVAL;
+
+	buf->vb.width  = 720;
+	buf->vb.height = 12;
+	buf->vb.field  = field;
+
+	if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
+		rc = videobuf_iolock(q, &buf->vb, NULL);
+		if (rc < 0)
+			goto fail;
+	}
+
+	buf->vb.state = VIDEOBUF_PREPARED;
+	return 0;
+
+fail:
+	free_buffer(q, buf);
+	return rc;
+}
+
+static void
+vbi_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
+{
+	struct em28xx_buffer    *buf     = container_of(vb,
+							struct em28xx_buffer,
+							vb);
+	struct em28xx_fh        *fh      = vq->priv_data;
+	struct em28xx           *dev     = fh->dev;
+	struct em28xx_dmaqueue  *vbiq    = &dev->vbiq;
+
+	buf->vb.state = VIDEOBUF_QUEUED;
+	list_add_tail(&buf->vb.queue, &vbiq->active);
+}
+
+static void vbi_release(struct videobuf_queue *q, struct videobuf_buffer *vb)
+{
+	struct em28xx_buffer *buf = container_of(vb, struct em28xx_buffer, vb);
+	free_buffer(q, buf);
+}
+
+struct videobuf_queue_ops em28xx_vbi_qops = {
+	.buf_setup    = vbi_setup,
+	.buf_prepare  = vbi_prepare,
+	.buf_queue    = vbi_queue,
+	.buf_release  = vbi_release,
+};
+
+/* ------------------------------------------------------------------ */
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 04c9ecc3c22..7022f7ba61b 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -163,7 +163,24 @@ static inline void buffer_filled(struct em28xx *dev,
 	buf->vb.field_count++;
 	do_gettimeofday(&buf->vb.ts);
 
-	dev->isoc_ctl.buf = NULL;
+	dev->isoc_ctl.vid_buf = NULL;
+
+	list_del(&buf->vb.queue);
+	wake_up(&buf->vb.done);
+}
+
+static inline void vbi_buffer_filled(struct em28xx *dev,
+				     struct em28xx_dmaqueue *dma_q,
+				     struct em28xx_buffer *buf)
+{
+	/* Advice that buffer was filled */
+	em28xx_isocdbg("[%p/%d] wakeup\n", buf, buf->vb.i);
+
+	buf->vb.state = VIDEOBUF_DONE;
+	buf->vb.field_count++;
+	do_gettimeofday(&buf->vb.ts);
+
+	dev->isoc_ctl.vbi_buf = NULL;
 
 	list_del(&buf->vb.queue);
 	wake_up(&buf->vb.done);
@@ -256,6 +273,63 @@ static void em28xx_copy_video(struct em28xx *dev,
 	dma_q->pos += len;
 }
 
+static void em28xx_copy_vbi(struct em28xx *dev,
+			      struct em28xx_dmaqueue  *dma_q,
+			      struct em28xx_buffer *buf,
+			      unsigned char *p,
+			      unsigned char *outp, unsigned long len)
+{
+	void *startwrite, *startread;
+	int  offset;
+	int bytesperline = 720;
+
+	if (dev == NULL) {
+		printk("dev is null\n");
+		return;
+	}
+
+	if (dma_q == NULL) {
+		printk("dma_q is null\n");
+		return;
+	}
+	if (buf == NULL) {
+		return;
+	}
+	if (p == NULL) {
+		printk("p is null\n");
+		return;
+	}
+	if (outp == NULL) {
+		printk("outp is null\n");
+		return;
+	}
+
+	if (dma_q->pos + len > buf->vb.size)
+		len = buf->vb.size - dma_q->pos;
+
+	if ((p[0] == 0x33 && p[1] == 0x95) ||
+	    (p[0] == 0x88 && p[1] == 0x88)) {
+		/* Header field, advance past it */
+		p += 4;
+	} else {
+		len += 4;
+	}
+
+	startread = p;
+
+	startwrite = outp + dma_q->pos;
+	offset = dma_q->pos;
+
+	/* Make sure the bottom field populates the second half of the frame */
+	if (buf->top_field == 0) {
+		startwrite += bytesperline * 0x0c;
+		offset += bytesperline * 0x0c;
+	}
+
+	memcpy(startwrite, startread, len);
+	dma_q->pos += len;
+}
+
 static inline void print_err_status(struct em28xx *dev,
 				     int packet, int status)
 {
@@ -306,7 +380,7 @@ static inline void get_next_buf(struct em28xx_dmaqueue *dma_q,
 
 	if (list_empty(&dma_q->active)) {
 		em28xx_isocdbg("No active queue to serve\n");
-		dev->isoc_ctl.buf = NULL;
+		dev->isoc_ctl.vid_buf = NULL;
 		*buf = NULL;
 		return;
 	}
@@ -318,7 +392,34 @@ static inline void get_next_buf(struct em28xx_dmaqueue *dma_q,
 	outp = videobuf_to_vmalloc(&(*buf)->vb);
 	memset(outp, 0, (*buf)->vb.size);
 
-	dev->isoc_ctl.buf = *buf;
+	dev->isoc_ctl.vid_buf = *buf;
+
+	return;
+}
+
+/*
+ * video-buf generic routine to get the next available VBI buffer
+ */
+static inline void vbi_get_next_buf(struct em28xx_dmaqueue *dma_q,
+				    struct em28xx_buffer **buf)
+{
+	struct em28xx *dev = container_of(dma_q, struct em28xx, vbiq);
+	char *outp;
+
+	if (list_empty(&dma_q->active)) {
+		em28xx_isocdbg("No active queue to serve\n");
+		dev->isoc_ctl.vbi_buf = NULL;
+		*buf = NULL;
+		return;
+	}
+
+	/* Get the next buffer */
+	*buf = list_entry(dma_q->active.next, struct em28xx_buffer, vb.queue);
+	/* Cleans up buffer - Usefull for testing for frame/URB loss */
+	outp = videobuf_to_vmalloc(&(*buf)->vb);
+	memset(outp, 0x00, (*buf)->vb.size);
+
+	dev->isoc_ctl.vbi_buf = *buf;
 
 	return;
 }
@@ -346,7 +447,7 @@ static inline int em28xx_isoc_copy(struct em28xx *dev, struct urb *urb)
 			return 0;
 	}
 
-	buf = dev->isoc_ctl.buf;
+	buf = dev->isoc_ctl.vid_buf;
 	if (buf != NULL)
 		outp = videobuf_to_vmalloc(&buf->vb);
 
@@ -416,6 +517,7 @@ static inline int em28xx_isoc_copy_vbi(struct em28xx *dev, struct urb *urb)
 {
 	struct em28xx_buffer    *buf, *vbi_buf;
 	struct em28xx_dmaqueue  *dma_q = &dev->vidq;
+	struct em28xx_dmaqueue  *vbi_dma_q = &dev->vbiq;
 	unsigned char *outp = NULL;
 	unsigned char *vbioutp = NULL;
 	int i, len = 0, rc = 1;
@@ -434,9 +536,14 @@ static inline int em28xx_isoc_copy_vbi(struct em28xx *dev, struct urb *urb)
 			return 0;
 	}
 
-	buf = dev->isoc_ctl.buf;
+	buf = dev->isoc_ctl.vid_buf;
 	if (buf != NULL)
 		outp = videobuf_to_vmalloc(&buf->vb);
+
+	vbi_buf = dev->isoc_ctl.vbi_buf;
+	if (vbi_buf != NULL)
+		vbioutp = videobuf_to_vmalloc(&vbi_buf->vb);
+
 	for (i = 0; i < urb->number_of_packets; i++) {
 		int status = urb->iso_frame_desc[i].status;
 
@@ -480,12 +587,41 @@ static inline int em28xx_isoc_copy_vbi(struct em28xx *dev, struct urb *urb)
 				printk("djh c should never happen\n");
 			} else if ((dev->vbi_read + len) < vbi_size) {
 				/* This entire frame is VBI data */
+				if (dev->vbi_read == 0 &&
+				    (!(dev->cur_field & 1))) {
+					/* Brand new frame */
+					if (vbi_buf != NULL)
+						vbi_buffer_filled(dev,
+								  vbi_dma_q,
+								  vbi_buf);
+					vbi_get_next_buf(vbi_dma_q, &vbi_buf);
+					if (vbi_buf == NULL)
+						vbioutp = NULL;
+					else {
+						vbioutp = videobuf_to_vmalloc(&vbi_buf->vb);
+					}
+				}
+
+				if (dev->vbi_read == 0) {
+					vbi_dma_q->pos = 0;
+					if (vbi_buf != NULL) {
+						if (dev->cur_field & 1)
+							vbi_buf->top_field = 0;
+						else
+							vbi_buf->top_field = 1;
+					}
+				}
+
 				dev->vbi_read += len;
+				em28xx_copy_vbi(dev, vbi_dma_q, vbi_buf, p,
+						vbioutp, len);
 			} else {
 				/* Some of this frame is VBI data and some is
 				   video data */
 				int vbi_data_len = vbi_size - dev->vbi_read;
 				dev->vbi_read += vbi_data_len;
+				em28xx_copy_vbi(dev, vbi_dma_q, vbi_buf, p,
+						vbioutp, vbi_data_len);
 				dev->capture_type = 1;
 				p += vbi_data_len;
 				len -= vbi_data_len;
@@ -570,8 +706,8 @@ static void free_buffer(struct videobuf_queue *vq, struct em28xx_buffer *buf)
 	   VIDEOBUF_ACTIVE, it won't be, though.
 	*/
 	spin_lock_irqsave(&dev->slock, flags);
-	if (dev->isoc_ctl.buf == buf)
-		dev->isoc_ctl.buf = NULL;
+	if (dev->isoc_ctl.vid_buf == buf)
+		dev->isoc_ctl.vid_buf = NULL;
 	spin_unlock_irqrestore(&dev->slock, flags);
 
 	videobuf_vmalloc_free(&buf->vb);
@@ -1542,8 +1678,12 @@ static int vidioc_streamon(struct file *file, void *priv,
 	mutex_lock(&dev->lock);
 	rc = res_get(fh);
 
-	if (likely(rc >= 0))
-		rc = videobuf_streamon(&fh->vb_vidq);
+	if (likely(rc >= 0)) {
+		if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+			rc = videobuf_streamon(&fh->vb_vidq);
+		else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE)
+			rc = videobuf_streamon(&fh->vb_vbiq);
+	}
 
 	mutex_unlock(&dev->lock);
 
@@ -1561,14 +1701,19 @@ static int vidioc_streamoff(struct file *file, void *priv,
 	if (rc < 0)
 		return rc;
 
-	if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+	if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE &&
+	    fh->type != V4L2_BUF_TYPE_VBI_CAPTURE)
 		return -EINVAL;
 	if (type != fh->type)
 		return -EINVAL;
 
 	mutex_lock(&dev->lock);
 
-	videobuf_streamoff(&fh->vb_vidq);
+	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		videobuf_streamoff(&fh->vb_vidq);
+	else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE)
+		videobuf_streamoff(&fh->vb_vbiq);
+
 	res_free(fh);
 
 	mutex_unlock(&dev->lock);
@@ -1589,6 +1734,7 @@ static int vidioc_querycap(struct file *file, void  *priv,
 	cap->version = EM28XX_VERSION_CODE;
 
 	cap->capabilities =
+			V4L2_CAP_VBI_CAPTURE |
 			V4L2_CAP_SLICED_VBI_CAPTURE |
 			V4L2_CAP_VIDEO_CAPTURE |
 			V4L2_CAP_READWRITE | V4L2_CAP_STREAMING;
@@ -1660,6 +1806,45 @@ static int vidioc_try_set_sliced_vbi_cap(struct file *file, void *priv,
 	return 0;
 }
 
+/* RAW VBI ioctls */
+
+static int vidioc_g_fmt_vbi_cap(struct file *file, void *priv,
+				struct v4l2_format *format)
+{
+	format->fmt.vbi.samples_per_line = 720;
+	format->fmt.vbi.sample_format = V4L2_PIX_FMT_GREY;
+	format->fmt.vbi.offset = 0;
+	format->fmt.vbi.flags = 0;
+
+	/* Varies by video standard (NTSC, PAL, etc.) */
+	/* FIXME: hard-coded for NTSC support */
+	format->fmt.vbi.sampling_rate = 6750000 * 4 / 2; /* FIXME: ??? */
+	format->fmt.vbi.count[0] = 12;
+	format->fmt.vbi.count[1] = 12;
+	format->fmt.vbi.start[0] = 10;
+	format->fmt.vbi.start[1] = 273;
+
+	return 0;
+}
+
+static int vidioc_s_fmt_vbi_cap(struct file *file, void *priv,
+				struct v4l2_format *format)
+{
+	format->fmt.vbi.samples_per_line = 720;
+	format->fmt.vbi.sample_format = V4L2_PIX_FMT_GREY;
+	format->fmt.vbi.offset = 0;
+	format->fmt.vbi.flags = 0;
+
+	/* Varies by video standard (NTSC, PAL, etc.) */
+	/* FIXME: hard-coded for NTSC support */
+	format->fmt.vbi.sampling_rate = 6750000 * 4 / 2; /* FIXME: ??? */
+	format->fmt.vbi.count[0] = 12;
+	format->fmt.vbi.count[1] = 12;
+	format->fmt.vbi.start[0] = 10;
+	format->fmt.vbi.start[1] = 273;
+
+	return 0;
+}
 
 static int vidioc_reqbufs(struct file *file, void *priv,
 			  struct v4l2_requestbuffers *rb)
@@ -1672,7 +1857,10 @@ static int vidioc_reqbufs(struct file *file, void *priv,
 	if (rc < 0)
 		return rc;
 
-	return videobuf_reqbufs(&fh->vb_vidq, rb);
+	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return videobuf_reqbufs(&fh->vb_vidq, rb);
+	else
+		return videobuf_reqbufs(&fh->vb_vbiq, rb);
 }
 
 static int vidioc_querybuf(struct file *file, void *priv,
@@ -1686,7 +1874,18 @@ static int vidioc_querybuf(struct file *file, void *priv,
 	if (rc < 0)
 		return rc;
 
-	return videobuf_querybuf(&fh->vb_vidq, b);
+	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return videobuf_querybuf(&fh->vb_vidq, b);
+	else {
+		/* FIXME: I'm not sure yet whether this is a bug in zvbi or
+		   the videobuf framework, but we probably shouldn't be
+		   returning a buffer larger than that which was asked for.
+		   At a minimum, it causes a crash in zvbi since it does
+		   a memcpy based on the source buffer length */
+		int result = videobuf_querybuf(&fh->vb_vbiq, b);
+		b->length = 17280;
+		return result;
+	}
 }
 
 static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *b)
@@ -1699,7 +1898,11 @@ static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *b)
 	if (rc < 0)
 		return rc;
 
-	return videobuf_qbuf(&fh->vb_vidq, b);
+	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return videobuf_qbuf(&fh->vb_vidq, b);
+	else {
+		return videobuf_qbuf(&fh->vb_vbiq, b);
+	}
 }
 
 static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b)
@@ -1712,7 +1915,12 @@ static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b)
 	if (rc < 0)
 		return rc;
 
-	return videobuf_dqbuf(&fh->vb_vidq, b, file->f_flags & O_NONBLOCK);
+	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return videobuf_dqbuf(&fh->vb_vidq, b, file->f_flags &
+				      O_NONBLOCK);
+	else
+		return videobuf_dqbuf(&fh->vb_vbiq, b, file->f_flags &
+				      O_NONBLOCK);
 }
 
 #ifdef CONFIG_VIDEO_V4L1_COMPAT
@@ -1720,7 +1928,10 @@ static int vidiocgmbuf(struct file *file, void *priv, struct video_mbuf *mbuf)
 {
 	struct em28xx_fh  *fh = priv;
 
-	return videobuf_cgmbuf(&fh->vb_vidq, mbuf, 8);
+	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return videobuf_cgmbuf(&fh->vb_vidq, mbuf, 8);
+	else
+		return videobuf_cgmbuf(&fh->vb_vbiq, mbuf, 8);
 }
 #endif
 
@@ -1884,9 +2095,17 @@ static int em28xx_v4l2_open(struct file *filp)
 	else
 		field = V4L2_FIELD_INTERLACED;
 
-	videobuf_queue_vmalloc_init(&fh->vb_vidq, &em28xx_video_qops,
-			NULL, &dev->slock, fh->type, field,
-			sizeof(struct em28xx_buffer), fh);
+	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		videobuf_queue_vmalloc_init(&fh->vb_vidq, &em28xx_video_qops,
+					    NULL, &dev->slock, fh->type, field,
+					    sizeof(struct em28xx_buffer), fh);
+
+	if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE)
+		videobuf_queue_vmalloc_init(&fh->vb_vbiq, &em28xx_vbi_qops,
+					    NULL, &dev->slock,
+					    V4L2_BUF_TYPE_VBI_CAPTURE,
+					    V4L2_FIELD_SEQ_TB,
+					    sizeof(struct em28xx_buffer), fh);
 
 	mutex_unlock(&dev->lock);
 
@@ -1948,7 +2167,7 @@ static int em28xx_v4l2_close(struct file *filp)
 	if (res_check(fh))
 		res_free(fh);
 
-	if (dev->users == 1) {
+	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE && dev->users == 1) {
 		videobuf_stop(&fh->vb_vidq);
 		videobuf_mmap_free(&fh->vb_vidq);
 
@@ -1977,6 +2196,12 @@ static int em28xx_v4l2_close(struct file *filp)
 					"0 (error=%i)\n", errCode);
 		}
 	}
+
+	if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
+		videobuf_stop(&fh->vb_vbiq);
+		videobuf_mmap_free(&fh->vb_vbiq);
+	}
+
 	kfree(fh);
 	dev->users--;
 	wake_up_interruptible_nr(&dev->open, 1);
@@ -2015,6 +2240,17 @@ em28xx_v4l2_read(struct file *filp, char __user *buf, size_t count,
 		return videobuf_read_stream(&fh->vb_vidq, buf, count, pos, 0,
 					filp->f_flags & O_NONBLOCK);
 	}
+
+
+	if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
+		mutex_lock(&dev->lock);
+		rc = res_get(fh);
+		mutex_unlock(&dev->lock);
+
+		return videobuf_read_stream(&fh->vb_vbiq, buf, count, pos, 0,
+					filp->f_flags & O_NONBLOCK);
+	}
+
 	return 0;
 }
 
@@ -2039,10 +2275,12 @@ static unsigned int em28xx_v4l2_poll(struct file *filp, poll_table *wait)
 	if (unlikely(rc < 0))
 		return POLLERR;
 
-	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != fh->type)
+	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return videobuf_poll_stream(filp, &fh->vb_vidq, wait);
+	else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE)
+		return videobuf_poll_stream(filp, &fh->vb_vbiq, wait);
+	else
 		return POLLERR;
-
-	return videobuf_poll_stream(filp, &fh->vb_vidq, wait);
 }
 
 /*
@@ -2091,6 +2329,8 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = {
 	.vidioc_g_fmt_vid_cap       = vidioc_g_fmt_vid_cap,
 	.vidioc_try_fmt_vid_cap     = vidioc_try_fmt_vid_cap,
 	.vidioc_s_fmt_vid_cap       = vidioc_s_fmt_vid_cap,
+	.vidioc_g_fmt_vbi_cap       = vidioc_g_fmt_vbi_cap,
+	.vidioc_s_fmt_vbi_cap       = vidioc_s_fmt_vbi_cap,
 	.vidioc_g_audio             = vidioc_g_audio,
 	.vidioc_s_audio             = vidioc_s_audio,
 	.vidioc_cropcap             = vidioc_cropcap,
@@ -2136,7 +2376,9 @@ static const struct video_device em28xx_video_template = {
 	.minor                      = -1,
 
 	.tvnorms                    = V4L2_STD_ALL,
-	.current_norm               = V4L2_STD_PAL,
+	/* FIXME: we need this to be NTSC for VBI to work - it should
+	   be moved to a per-board definition */
+	.current_norm               = V4L2_STD_NTSC,
 };
 
 static const struct v4l2_file_operations radio_fops = {
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index 1656d2cf34a..8dac50b9c00 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -214,7 +214,8 @@ struct em28xx_usb_isoc_ctl {
 	int				tmp_buf_len;
 
 		/* Stores already requested buffers */
-	struct em28xx_buffer    	*buf;
+	struct em28xx_buffer    	*vid_buf;
+	struct em28xx_buffer    	*vbi_buf;
 
 		/* Stores the number of received fields */
 	int				nfields;
@@ -467,6 +468,7 @@ struct em28xx_fh {
 	int           radio;
 
 	struct videobuf_queue        vb_vidq;
+	struct videobuf_queue        vb_vbiq;
 
 	enum v4l2_buf_type           type;
 };
@@ -565,6 +567,7 @@ struct em28xx {
 
 	/* Isoc control struct */
 	struct em28xx_dmaqueue vidq;
+	struct em28xx_dmaqueue vbiq;
 	struct em28xx_usb_isoc_ctl isoc_ctl;
 	spinlock_t slock;
 
@@ -693,6 +696,9 @@ void em28xx_deregister_snapshot_button(struct em28xx *dev);
 int em28xx_ir_init(struct em28xx *dev);
 int em28xx_ir_fini(struct em28xx *dev);
 
+/* Provided by em28xx-vbi.c */
+extern struct videobuf_queue_ops em28xx_vbi_qops;
+
 /* printk macros */
 
 #define em28xx_err(fmt, arg...) do {\
-- 
cgit v1.2.3


From 91f6dcec929b37a4568ddf55ef84e007d8fccc34 Mon Sep 17 00:00:00 2001
From: Devin Heitmueller <dheitmueller@kernellabs.com>
Date: Wed, 2 Sep 2009 22:23:23 -0300
Subject: V4L/DVB (12743): em28xx: fix mmap_mapper with vbi

When adding support for both video and VBI, I missed the mmap ioctl.  Add
the missing call.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/em28xx/em28xx-video.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 7022f7ba61b..55bc8ea5609 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -2303,7 +2303,10 @@ static int em28xx_v4l2_mmap(struct file *filp, struct vm_area_struct *vma)
 	if (unlikely(rc < 0))
 		return rc;
 
-	rc = videobuf_mmap_mapper(&fh->vb_vidq, vma);
+	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		rc = videobuf_mmap_mapper(&fh->vb_vidq, vma);
+	else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE)
+		rc = videobuf_mmap_mapper(&fh->vb_vbiq, vma);
 
 	em28xx_videodbg("vma start=0x%08lx, size=%ld, ret=%d\n",
 		(unsigned long)vma->vm_start,
-- 
cgit v1.2.3


From 8c873d31af868b4e340defc7053945636c8bd0e1 Mon Sep 17 00:00:00 2001
From: Devin Heitmueller <dheitmueller@kernellabs.com>
Date: Thu, 3 Sep 2009 00:23:27 -0300
Subject: V4L/DVB (12744): em28xx: restructure fh/dev locking to handle both
 video and vbi

The current locking infrastructure didn't support having multiple fds accessing
the device (such as video and vbi).  Rework the locking infrastructure,
borrowing the design from cx88.

This work was sponsored by EyeMagnet Limited.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/em28xx/em28xx-video.c | 182 +++++++++++++++---------------
 drivers/media/video/em28xx/em28xx.h       |  10 +-
 2 files changed, 102 insertions(+), 90 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 55bc8ea5609..dda4a76dcab 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -833,34 +833,63 @@ static void video_mux(struct em28xx *dev, int index)
 }
 
 /* Usage lock check functions */
-static int res_get(struct em28xx_fh *fh)
+static int res_get(struct em28xx_fh *fh, unsigned int bit)
 {
 	struct em28xx    *dev = fh->dev;
-	int		 rc   = 0;
 
-	/* This instance already has stream_on */
-	if (fh->stream_on)
-		return rc;
+	if (fh->resources & bit)
+		/* have it already allocated */
+		return 1;
 
-	if (dev->stream_on)
-		return -EBUSY;
+	/* is it free? */
+	mutex_lock(&dev->lock);
+	if (dev->resources & bit) {
+		/* no, someone else uses it */
+		mutex_unlock(&dev->lock);
+		return 0;
+	}
+	/* it's free, grab it */
+	fh->resources  |= bit;
+	dev->resources |= bit;
+	em28xx_videodbg("res: get %d\n", bit);
+	mutex_unlock(&dev->lock);
+	return 1;
+}
 
-	dev->stream_on = 1;
-	fh->stream_on  = 1;
-	return rc;
+static int res_check(struct em28xx_fh *fh, unsigned int bit)
+{
+	return (fh->resources & bit);
 }
 
-static int res_check(struct em28xx_fh *fh)
+static int res_locked(struct em28xx *dev, unsigned int bit)
 {
-	return fh->stream_on;
+	return (dev->resources & bit);
 }
 
-static void res_free(struct em28xx_fh *fh)
+static void res_free(struct em28xx_fh *fh, unsigned int bits)
 {
 	struct em28xx    *dev = fh->dev;
 
-	fh->stream_on = 0;
-	dev->stream_on = 0;
+	BUG_ON((fh->resources & bits) != bits);
+
+	mutex_lock(&dev->lock);
+	fh->resources  &= ~bits;
+	dev->resources &= ~bits;
+	em28xx_videodbg("res: put %d\n", bits);
+	mutex_unlock(&dev->lock);
+}
+
+static int get_ressource(struct em28xx_fh *fh)
+{
+	switch (fh->type) {
+	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+		return EM28XX_RESOURCE_VIDEO;
+	case V4L2_BUF_TYPE_VBI_CAPTURE:
+		return EM28XX_RESOURCE_VBI;
+	default:
+		BUG();
+		return 0;
+	}
 }
 
 /*
@@ -1103,12 +1132,6 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
 		goto out;
 	}
 
-	if (dev->stream_on && !fh->stream_on) {
-		em28xx_errdev("%s device in use by another fh\n", __func__);
-		rc = -EBUSY;
-		goto out;
-	}
-
 	rc = em28xx_set_video_format(dev, f->fmt.pix.pixelformat,
 				f->fmt.pix.width, f->fmt.pix.height);
 
@@ -1668,24 +1691,25 @@ static int vidioc_streamon(struct file *file, void *priv,
 {
 	struct em28xx_fh      *fh  = priv;
 	struct em28xx         *dev = fh->dev;
-	int                   rc;
+	int                   rc = -EINVAL;
 
 	rc = check_dev(dev);
 	if (rc < 0)
 		return rc;
 
+	if (unlikely(type != fh->type))
+		return -EINVAL;
 
-	mutex_lock(&dev->lock);
-	rc = res_get(fh);
+	em28xx_videodbg("vidioc_streamon fh=%p t=%d fh->res=%d dev->res=%d\n",
+			fh, type, fh->resources, dev->resources);
 
-	if (likely(rc >= 0)) {
-		if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
-			rc = videobuf_streamon(&fh->vb_vidq);
-		else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE)
-			rc = videobuf_streamon(&fh->vb_vbiq);
-	}
+	if (unlikely(!res_get(fh,get_ressource(fh))))
+		return -EBUSY;
 
-	mutex_unlock(&dev->lock);
+	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		rc = videobuf_streamon(&fh->vb_vidq);
+	else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE)
+		rc = videobuf_streamon(&fh->vb_vbiq);
 
 	return rc;
 }
@@ -1707,16 +1731,16 @@ static int vidioc_streamoff(struct file *file, void *priv,
 	if (type != fh->type)
 		return -EINVAL;
 
-	mutex_lock(&dev->lock);
+	em28xx_videodbg("vidioc_streamoff fh=%p t=%d fh->res=%d dev->res=%d\n",
+			fh, type, fh->resources, dev->resources);
 
-	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
 		videobuf_streamoff(&fh->vb_vidq);
-	else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE)
+		res_free(fh, EM28XX_RESOURCE_VIDEO);
+	} else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
 		videobuf_streamoff(&fh->vb_vbiq);
-
-	res_free(fh);
-
-	mutex_unlock(&dev->lock);
+		res_free(fh, EM28XX_RESOURCE_VBI);
+	}
 
 	return 0;
 }
@@ -2095,17 +2119,16 @@ static int em28xx_v4l2_open(struct file *filp)
 	else
 		field = V4L2_FIELD_INTERLACED;
 
-	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		videobuf_queue_vmalloc_init(&fh->vb_vidq, &em28xx_video_qops,
-					    NULL, &dev->slock, fh->type, field,
-					    sizeof(struct em28xx_buffer), fh);
+	videobuf_queue_vmalloc_init(&fh->vb_vidq, &em28xx_video_qops,
+				    NULL, &dev->slock,
+				    V4L2_BUF_TYPE_VIDEO_CAPTURE, field,
+				    sizeof(struct em28xx_buffer), fh);
 
-	if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE)
-		videobuf_queue_vmalloc_init(&fh->vb_vbiq, &em28xx_vbi_qops,
-					    NULL, &dev->slock,
-					    V4L2_BUF_TYPE_VBI_CAPTURE,
-					    V4L2_FIELD_SEQ_TB,
-					    sizeof(struct em28xx_buffer), fh);
+	videobuf_queue_vmalloc_init(&fh->vb_vbiq, &em28xx_vbi_qops,
+				    NULL, &dev->slock,
+				    V4L2_BUF_TYPE_VBI_CAPTURE,
+				    V4L2_FIELD_SEQ_TB,
+				    sizeof(struct em28xx_buffer), fh);
 
 	mutex_unlock(&dev->lock);
 
@@ -2162,20 +2185,21 @@ static int em28xx_v4l2_close(struct file *filp)
 
 	em28xx_videodbg("users=%d\n", dev->users);
 
-
-	mutex_lock(&dev->lock);
-	if (res_check(fh))
-		res_free(fh);
-
-	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE && dev->users == 1) {
+	if (res_check(fh, EM28XX_RESOURCE_VIDEO)) {
 		videobuf_stop(&fh->vb_vidq);
-		videobuf_mmap_free(&fh->vb_vidq);
+		res_free(fh, EM28XX_RESOURCE_VIDEO);
+	}
 
+	if (res_check(fh, EM28XX_RESOURCE_VBI)) {
+		videobuf_stop(&fh->vb_vbiq);
+		res_free(fh, EM28XX_RESOURCE_VBI);
+	}
+
+	if(dev->users == 1) {
 		/* the device is already disconnect,
 		   free the remaining resources */
 		if (dev->state & DEV_DISCONNECTED) {
 			em28xx_release_resources(dev);
-			mutex_unlock(&dev->lock);
 			kfree(dev);
 			return 0;
 		}
@@ -2197,15 +2221,11 @@ static int em28xx_v4l2_close(struct file *filp)
 		}
 	}
 
-	if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
-		videobuf_stop(&fh->vb_vbiq);
-		videobuf_mmap_free(&fh->vb_vbiq);
-	}
-
+	videobuf_mmap_free(&fh->vb_vidq);
+	videobuf_mmap_free(&fh->vb_vbiq);
 	kfree(fh);
 	dev->users--;
 	wake_up_interruptible_nr(&dev->open, 1);
-	mutex_unlock(&dev->lock);
 	return 0;
 }
 
@@ -2230,12 +2250,8 @@ em28xx_v4l2_read(struct file *filp, char __user *buf, size_t count,
 	 */
 
 	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
-		mutex_lock(&dev->lock);
-		rc = res_get(fh);
-		mutex_unlock(&dev->lock);
-
-		if (unlikely(rc < 0))
-			return rc;
+		if (res_locked(dev, EM28XX_RESOURCE_VIDEO))
+			return -EBUSY;
 
 		return videobuf_read_stream(&fh->vb_vidq, buf, count, pos, 0,
 					filp->f_flags & O_NONBLOCK);
@@ -2243,9 +2259,8 @@ em28xx_v4l2_read(struct file *filp, char __user *buf, size_t count,
 
 
 	if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
-		mutex_lock(&dev->lock);
-		rc = res_get(fh);
-		mutex_unlock(&dev->lock);
+		if (!res_get(fh, EM28XX_RESOURCE_VBI))
+			return -EBUSY;
 
 		return videobuf_read_stream(&fh->vb_vbiq, buf, count, pos, 0,
 					filp->f_flags & O_NONBLOCK);
@@ -2268,19 +2283,17 @@ static unsigned int em28xx_v4l2_poll(struct file *filp, poll_table *wait)
 	if (rc < 0)
 		return rc;
 
-	mutex_lock(&dev->lock);
-	rc = res_get(fh);
-	mutex_unlock(&dev->lock);
-
-	if (unlikely(rc < 0))
-		return POLLERR;
-
-	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+		if (!res_get(fh, EM28XX_RESOURCE_VIDEO))
+			return POLLERR;
 		return videobuf_poll_stream(filp, &fh->vb_vidq, wait);
-	else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE)
+	} else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
+		if (!res_get(fh, EM28XX_RESOURCE_VBI))
+			return POLLERR;
 		return videobuf_poll_stream(filp, &fh->vb_vbiq, wait);
-	else
+	} else {
 		return POLLERR;
+	}
 }
 
 /*
@@ -2296,13 +2309,6 @@ static int em28xx_v4l2_mmap(struct file *filp, struct vm_area_struct *vma)
 	if (rc < 0)
 		return rc;
 
-	mutex_lock(&dev->lock);
-	rc = res_get(fh);
-	mutex_unlock(&dev->lock);
-
-	if (unlikely(rc < 0))
-		return rc;
-
 	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
 		rc = videobuf_mmap_mapper(&fh->vb_vidq, vma);
 	else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE)
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index 8dac50b9c00..b4a6e07236d 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -444,6 +444,10 @@ enum em28xx_dev_state {
 #define EM28XX_AUDIO   0x10
 #define EM28XX_DVB     0x20
 
+/* em28xx resource types (used for res_get/res_lock etc */
+#define EM28XX_RESOURCE_VIDEO 0x01
+#define EM28XX_RESOURCE_VBI   0x02
+
 struct em28xx_audio {
 	char name[50];
 	char *transfer_buffer[EM28XX_AUDIO_BUFS];
@@ -464,8 +468,8 @@ struct em28xx;
 
 struct em28xx_fh {
 	struct em28xx *dev;
-	unsigned int  stream_on:1;	/* Locks streams */
 	int           radio;
+	unsigned int  resources;
 
 	struct videobuf_queue        vb_vidq;
 	struct videobuf_queue        vb_vbiq;
@@ -495,7 +499,6 @@ struct em28xx {
 	/* Vinmode/Vinctl used at the driver */
 	int vinmode, vinctl;
 
-	unsigned int stream_on:1;	/* Locks streams */
 	unsigned int has_audio_class:1;
 	unsigned int has_alsa_audio:1;
 
@@ -563,6 +566,9 @@ struct em28xx {
 	struct video_device *vbi_dev;
 	struct video_device *radio_dev;
 
+	/* resources in use */
+	unsigned int resources;
+
 	unsigned char eedata[256];
 
 	/* Isoc control struct */
-- 
cgit v1.2.3


From 365adee851ae8312e6d9e0ba6fdc6a98599e2778 Mon Sep 17 00:00:00 2001
From: Devin Heitmueller <dheitmueller@kernellabs.com>
Date: Thu, 3 Sep 2009 00:25:54 -0300
Subject: V4L/DVB (12745): em28xx: remove unreferenced variable

Remove an unreferenced variable introduced during the VBI introduction.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/em28xx/em28xx-vbi.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/em28xx/em28xx-vbi.c b/drivers/media/video/em28xx/em28xx-vbi.c
index b5802d4cb62..27d7e860fa5 100644
--- a/drivers/media/video/em28xx/em28xx-vbi.c
+++ b/drivers/media/video/em28xx/em28xx-vbi.c
@@ -85,7 +85,6 @@ static int
 vbi_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,
 	    enum v4l2_field field)
 {
-	struct em28xx_fh     *fh  = q->priv_data;
 	struct em28xx_buffer *buf = container_of(vb, struct em28xx_buffer, vb);
 	int                  rc = 0;
 	unsigned int size;
-- 
cgit v1.2.3


From 290c0cfac9050fa2442e93f35f47e4faa4227e85 Mon Sep 17 00:00:00 2001
From: Devin Heitmueller <dheitmueller@kernellabs.com>
Date: Fri, 11 Sep 2009 00:01:06 -0300
Subject: V4L/DVB (12746): em28xx: do not create /dev/vbiX device if VBI not
 supported

Do not create the VBI device in cases where VBI is not supported on the target
em28xx chip.

This work was sponsored by EyeMagnet Limited.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/em28xx/em28xx-core.c  |  2 +-
 drivers/media/video/em28xx/em28xx-video.c | 25 ++++++++++++++++---------
 2 files changed, 17 insertions(+), 10 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c
index 3128b7fce07..a88257a7d94 100644
--- a/drivers/media/video/em28xx/em28xx-core.c
+++ b/drivers/media/video/em28xx/em28xx-core.c
@@ -1131,7 +1131,7 @@ struct em28xx *em28xx_get_device(int minor,
 	list_for_each_entry(h, &em28xx_devlist, devlist) {
 		if (h->vdev->minor == minor)
 			dev = h;
-		if (h->vbi_dev->minor == minor) {
+		if (h->vbi_dev && h->vbi_dev->minor == minor) {
 			dev = h;
 			*fh_type = V4L2_BUF_TYPE_VBI_CAPTURE;
 		}
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index dda4a76dcab..a5632c7e643 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -2504,14 +2504,17 @@ int em28xx_register_analog_devices(struct em28xx *dev)
 	}
 
 	/* Allocate and fill vbi video_device struct */
-	dev->vbi_dev = em28xx_vdev_init(dev, &em28xx_video_template, "vbi");
+	if (em28xx_vbi_supported(dev) == 1) {
+		dev->vbi_dev = em28xx_vdev_init(dev, &em28xx_video_template,
+						"vbi");
 
-	/* register v4l2 vbi video_device */
-	ret = video_register_device(dev->vbi_dev, VFL_TYPE_VBI,
-					vbi_nr[dev->devno]);
-	if (ret < 0) {
-		em28xx_errdev("unable to register vbi device\n");
-		return ret;
+		/* register v4l2 vbi video_device */
+		ret = video_register_device(dev->vbi_dev, VFL_TYPE_VBI,
+					    vbi_nr[dev->devno]);
+		if (ret < 0) {
+			em28xx_errdev("unable to register vbi device\n");
+			return ret;
+		}
 	}
 
 	if (em28xx_boards[dev->model].radio.type == EM28XX_RADIO) {
@@ -2531,8 +2534,12 @@ int em28xx_register_analog_devices(struct em28xx *dev)
 			    dev->radio_dev->num);
 	}
 
-	em28xx_info("V4L2 device registered as /dev/video%d and /dev/vbi%d\n",
-				dev->vdev->num, dev->vbi_dev->num);
+	em28xx_info("V4L2 video device registered as /dev/video%d\n",
+				dev->vdev->num);
+
+	if (dev->vbi_dev)
+		em28xx_info("V4L2 VBI device registered as /dev/vbi%d\n",
+			    dev->vbi_dev->num);
 
 	return 0;
 }
-- 
cgit v1.2.3


From 0414614aab32d84da2bb092eb83b5e456946022d Mon Sep 17 00:00:00 2001
From: Devin Heitmueller <dheitmueller@kernellabs.com>
Date: Fri, 11 Sep 2009 00:08:44 -0300
Subject: V4L/DVB (12747): em28xx: only advertise VBI capability if supported

Change the code so we only claim to support VBI if the underlying chipset
actually has the support.

This work was sponsored by EyeMagnet Limited.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/em28xx/em28xx-video.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index a5632c7e643..8955b7b5365 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -1758,11 +1758,13 @@ static int vidioc_querycap(struct file *file, void  *priv,
 	cap->version = EM28XX_VERSION_CODE;
 
 	cap->capabilities =
-			V4L2_CAP_VBI_CAPTURE |
 			V4L2_CAP_SLICED_VBI_CAPTURE |
 			V4L2_CAP_VIDEO_CAPTURE |
 			V4L2_CAP_READWRITE | V4L2_CAP_STREAMING;
 
+	if (dev->vbi_dev)
+		cap->capabilities |= V4L2_CAP_VBI_CAPTURE;
+
 	if (dev->audio_mode.has_audio)
 		cap->capabilities |= V4L2_CAP_AUDIO;
 
-- 
cgit v1.2.3


From 19bf00384a6d5bbe5d7b8afbcc25772e3675d423 Mon Sep 17 00:00:00 2001
From: Devin Heitmueller <dheitmueller@kernellabs.com>
Date: Fri, 11 Sep 2009 00:40:18 -0300
Subject: V4L/DVB (12748): em28xx: implement g_std v4l call

We need to implement the g_std call, or else the default norm always gets
returned, which breaks VBI capturing if you had changed the standard to NTSC
using s_std.

I had temporarily changed the default norm to NTSC so that zvbi-ntsc-cc
wouldn't choke, so now that we are returning the correct value, switch it back
to PAL as the default.

This work was sponsored by EyeMagnet Limited.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/em28xx/em28xx-video.c | 21 ++++++++++++++++++---
 1 file changed, 18 insertions(+), 3 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 8955b7b5365..486db84092e 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -1140,6 +1140,22 @@ out:
 	return rc;
 }
 
+static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *norm)
+{
+	struct em28xx_fh   *fh  = priv;
+	struct em28xx      *dev = fh->dev;
+	struct v4l2_format f;
+	int                rc;
+
+	rc = check_dev(dev);
+	if (rc < 0)
+		return rc;
+
+	*norm = dev->norm;
+
+	return 0;
+}
+
 static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *norm)
 {
 	struct em28xx_fh   *fh  = priv;
@@ -2354,6 +2370,7 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = {
 	.vidioc_querybuf            = vidioc_querybuf,
 	.vidioc_qbuf                = vidioc_qbuf,
 	.vidioc_dqbuf               = vidioc_dqbuf,
+	.vidioc_g_std               = vidioc_g_std,
 	.vidioc_s_std               = vidioc_s_std,
 	.vidioc_g_parm		    = vidioc_g_parm,
 	.vidioc_s_parm		    = vidioc_s_parm,
@@ -2387,9 +2404,7 @@ static const struct video_device em28xx_video_template = {
 	.minor                      = -1,
 
 	.tvnorms                    = V4L2_STD_ALL,
-	/* FIXME: we need this to be NTSC for VBI to work - it should
-	   be moved to a per-board definition */
-	.current_norm               = V4L2_STD_NTSC,
+	.current_norm               = V4L2_STD_PAL,
 };
 
 static const struct v4l2_file_operations radio_fops = {
-- 
cgit v1.2.3


From 10e01255026fb6a68b5aaa29427488ba2b35fc64 Mon Sep 17 00:00:00 2001
From: Devin Heitmueller <dheitmueller@kernellabs.com>
Date: Fri, 11 Sep 2009 00:51:48 -0300
Subject: V4L/DVB (12749): em28xx: remove unneeded code that set VINCTRL
 register

Remove redundant call to set the vinctrl register.  This eliminates any
ambiguity as to how the register is configured (since it is now always set in
em28xx_set_outfmt).

This work was sponsored by EyeMagnet Limited.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/em28xx/em28xx-video.c | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 486db84092e..8a06210e05d 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -2492,13 +2492,10 @@ int em28xx_register_analog_devices(struct em28xx *dev)
 	dev->mute = 1;
 	dev->volume = 0x1f;
 
-	/* enable vbi capturing */
-
 /*	em28xx_write_reg(dev, EM28XX_R0E_AUDIOSRC, 0xc0); audio register */
 	val = (u8)em28xx_read_reg(dev, EM28XX_R0F_XCLK);
 	em28xx_write_reg(dev, EM28XX_R0F_XCLK,
 			 (EM28XX_XCLK_AUDIO_UNMUTE | val));
-	em28xx_write_reg(dev, EM28XX_R11_VINCTRL, 0x51);
 
 	em28xx_set_outfmt(dev);
 	em28xx_colorlevels_set_default(dev);
-- 
cgit v1.2.3


From 891114a413f2ff8722ef4397bb6a902aab006414 Mon Sep 17 00:00:00 2001
From: Devin Heitmueller <dheitmueller@kernellabs.com>
Date: Fri, 11 Sep 2009 00:53:44 -0300
Subject: V4L/DVB (12750): em28xx: fix unused variable warning

Remove unused variable from when I introduced the g_std() function.

This work was sponsored by EyeMagnet Limited.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/em28xx/em28xx-video.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 8a06210e05d..2466c0faf3c 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -1144,7 +1144,6 @@ static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *norm)
 {
 	struct em28xx_fh   *fh  = priv;
 	struct em28xx      *dev = fh->dev;
-	struct v4l2_format f;
 	int                rc;
 
 	rc = check_dev(dev);
-- 
cgit v1.2.3


From 353330c3ebf01c8f436b41690d95ec1548b6f364 Mon Sep 17 00:00:00 2001
From: Jose Alberto Reguero <jareguero@telefonica.net>
Date: Sat, 12 Sep 2009 09:51:36 -0300
Subject: V4L/DVB (12753): af9015: [1/2] fix USB TS configuration

Fix wrongly configured USB2.0 TS EP.

Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/dvb-usb/af9015.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c
index 99cdd0d101c..03838e629e0 100644
--- a/drivers/media/dvb/dvb-usb/af9015.c
+++ b/drivers/media/dvb/dvb-usb/af9015.c
@@ -874,7 +874,7 @@ static int af9015_read_config(struct usb_device *udev)
 			af9015_config.dual_mode = 0;
 		} else {
 			af9015_properties[i].adapter[0].stream.u.bulk.buffersize
-				= TS_USB20_MAX_PACKET_SIZE;
+				= TS_USB20_FRAME_SIZE;
 		}
 	}
 
@@ -1310,7 +1310,7 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 					.u = {
 						.bulk = {
 							.buffersize =
-						TS_USB20_MAX_PACKET_SIZE,
+						TS_USB20_FRAME_SIZE,
 						}
 					}
 				},
@@ -1416,7 +1416,7 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 					.u = {
 						.bulk = {
 							.buffersize =
-						TS_USB20_MAX_PACKET_SIZE,
+						TS_USB20_FRAME_SIZE,
 						}
 					}
 				},
@@ -1522,7 +1522,7 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 					.u = {
 						.bulk = {
 							.buffersize =
-						TS_USB20_MAX_PACKET_SIZE,
+						TS_USB20_FRAME_SIZE,
 						}
 					}
 				},
-- 
cgit v1.2.3


From 9c863278097a4905a78ee0d70d417641aecfac2e Mon Sep 17 00:00:00 2001
From: Antti Palosaari <crope@iki.fi>
Date: Sat, 12 Sep 2009 13:35:29 -0300
Subject: V4L/DVB (12754): af9015: [2/2] fix USB TS configuration

Fix wrongly configured USB1.1 TS EP.

Patch serie also increases USB URB size to reduce wakeups.
USB1.1 URB size from 64 to 940 bytes
USB2.0 URB size from 512 to 16356 bytes

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/dvb-usb/af9015.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c
index 03838e629e0..fdfa0f54291 100644
--- a/drivers/media/dvb/dvb-usb/af9015.c
+++ b/drivers/media/dvb/dvb-usb/af9015.c
@@ -369,12 +369,14 @@ static int af9015_init_endpoint(struct dvb_usb_device *d)
 	u8  packet_size;
 	deb_info("%s: USB speed:%d\n", __func__, d->udev->speed);
 
+	/* Windows driver uses packet count 21 for USB1.1 and 348 for USB2.0.
+	   We use smaller - about 1/4 from the original, 5 and 87. */
 #define TS_PACKET_SIZE            188
 
-#define TS_USB20_PACKET_COUNT     348
+#define TS_USB20_PACKET_COUNT      87
 #define TS_USB20_FRAME_SIZE       (TS_PACKET_SIZE*TS_USB20_PACKET_COUNT)
 
-#define TS_USB11_PACKET_COUNT      21
+#define TS_USB11_PACKET_COUNT       5
 #define TS_USB11_FRAME_SIZE       (TS_PACKET_SIZE*TS_USB11_PACKET_COUNT)
 
 #define TS_USB20_MAX_PACKET_SIZE  512
@@ -868,7 +870,7 @@ static int af9015_read_config(struct usb_device *udev)
 		/* USB1.1 set smaller buffersize and disable 2nd adapter */
 		if (udev->speed == USB_SPEED_FULL) {
 			af9015_properties[i].adapter[0].stream.u.bulk.buffersize
-				= TS_USB11_MAX_PACKET_SIZE;
+				= TS_USB11_FRAME_SIZE;
 			/* disable 2nd adapter because we don't have
 			   PID-filters */
 			af9015_config.dual_mode = 0;
-- 
cgit v1.2.3


From 06565d7a4231b77a1181f5b853b076f374535649 Mon Sep 17 00:00:00 2001
From: Antti Palosaari <crope@iki.fi>
Date: Sat, 12 Sep 2009 20:46:30 -0300
Subject: V4L/DVB (12755): af9015: improve usb control message function
 slightly

* define names for few values
* decrease buffer len by one byte which was not used
* add check for buffer overflow for sure
* indentation fixes
* remove useless 0 len check from memcpy
It should not happen and if it happens memcpy should not do anything.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/dvb-usb/af9015.c | 32 ++++++++++++++++++++++++--------
 1 file changed, 24 insertions(+), 8 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c
index fdfa0f54291..ebb9981eb89 100644
--- a/drivers/media/dvb/dvb-usb/af9015.c
+++ b/drivers/media/dvb/dvb-usb/af9015.c
@@ -61,10 +61,13 @@ static struct af9013_config af9015_af9013_config[] = {
 
 static int af9015_rw_udev(struct usb_device *udev, struct req_t *req)
 {
+#define BUF_LEN 63
+#define REQ_HDR_LEN 8 /* send header size */
+#define ACK_HDR_LEN 2 /* rece header size */
 	int act_len, ret;
-	u8 buf[64];
+	u8 buf[BUF_LEN];
 	u8 write = 1;
-	u8 msg_len = 8;
+	u8 msg_len = REQ_HDR_LEN;
 	static u8 seq; /* packet sequence number */
 
 	if (mutex_lock_interruptible(&af9015_usb_mutex) < 0)
@@ -107,17 +110,26 @@ static int af9015_rw_udev(struct usb_device *udev, struct req_t *req)
 		goto error_unlock;
 	}
 
+	/* buffer overflow check */
+	if ((write && (req->data_len > BUF_LEN - REQ_HDR_LEN)) ||
+		(!write && (req->data_len > BUF_LEN - ACK_HDR_LEN))) {
+		err("too much data; cmd:%d len:%d", req->cmd, req->data_len);
+		ret = -EINVAL;
+		goto error_unlock;
+	}
+
 	/* write requested */
 	if (write) {
-		memcpy(&buf[8], req->data, req->data_len);
+		memcpy(&buf[REQ_HDR_LEN], req->data, req->data_len);
 		msg_len += req->data_len;
 	}
+
 	deb_xfer(">>> ");
 	debug_dump(buf, msg_len, deb_xfer);
 
 	/* send req */
 	ret = usb_bulk_msg(udev, usb_sndbulkpipe(udev, 0x02), buf, msg_len,
-	&act_len, AF9015_USB_TIMEOUT);
+		&act_len, AF9015_USB_TIMEOUT);
 	if (ret)
 		err("bulk message failed:%d (%d/%d)", ret, msg_len, act_len);
 	else
@@ -130,10 +142,14 @@ static int af9015_rw_udev(struct usb_device *udev, struct req_t *req)
 	if (req->cmd == DOWNLOAD_FIRMWARE || req->cmd == RECONNECT_USB)
 		goto exit_unlock;
 
-	/* receive ack and data if read req */
-	msg_len = 1 + 1 + req->data_len;  /* seq + status + data len */
+	/* write receives seq + status = 2 bytes
+	   read receives seq + status + data = 2 + N bytes */
+	msg_len = ACK_HDR_LEN;
+	if (!write)
+		msg_len += req->data_len;
+
 	ret = usb_bulk_msg(udev, usb_rcvbulkpipe(udev, 0x81), buf, msg_len,
-			   &act_len, AF9015_USB_TIMEOUT);
+		&act_len, AF9015_USB_TIMEOUT);
 	if (ret) {
 		err("recv bulk message failed:%d", ret);
 		ret = -1;
@@ -159,7 +175,7 @@ static int af9015_rw_udev(struct usb_device *udev, struct req_t *req)
 
 	/* read request, copy returned data to return buf */
 	if (!write)
-		memcpy(req->data, &buf[2], req->data_len);
+		memcpy(req->data, &buf[ACK_HDR_LEN], req->data_len);
 
 error_unlock:
 exit_unlock:
-- 
cgit v1.2.3


From f4e96deb4513d044653027d4921fd7592195503a Mon Sep 17 00:00:00 2001
From: Antti Palosaari <crope@iki.fi>
Date: Sat, 12 Sep 2009 21:25:59 -0300
Subject: V4L/DVB (12756): af9015: fix typo in register compare

And mask should be 0xff00 instead of 0xae00.

Thanks to Jochen Friedrich <jochen@scram.de> for pointing this.

Cc: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/dvb-usb/af9015.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c
index ebb9981eb89..cf042b309b4 100644
--- a/drivers/media/dvb/dvb-usb/af9015.c
+++ b/drivers/media/dvb/dvb-usb/af9015.c
@@ -97,7 +97,7 @@ static int af9015_rw_udev(struct usb_device *udev, struct req_t *req)
 		break;
 	case WRITE_MEMORY:
 		if (((req->addr & 0xff00) == 0xff00) ||
-		    ((req->addr & 0xae00) == 0xae00))
+		    ((req->addr & 0xff00) == 0xae00))
 			buf[0] = WRITE_VIRTUAL_MEMORY;
 	case WRITE_VIRTUAL_MEMORY:
 	case COPY_FIRMWARE:
-- 
cgit v1.2.3


From 81259f210ef09c6e6e643c7cecc803a7083f970e Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@kernellabs.com>
Date: Sun, 11 May 2008 12:46:52 -0300
Subject: V4L/DVB (12861): tda18271: add support for additional low-power
 standby modes

By default, the driver enters standby mode with slave tuner output
loop thru enabled and xtal oscillator on.

Not all designs require that slave tuner output loop thru and
xtal oscillator remain active while in standby mode, so two
additional standby modes have been added:

- standby mode with xtal oscillator on (loop thru off)

- total power off

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/common/tuners/tda18271-fe.c   | 16 +++++++++++++---
 drivers/media/common/tuners/tda18271-priv.h |  1 +
 drivers/media/common/tuners/tda18271.h      | 14 ++++++++++++++
 3 files changed, 28 insertions(+), 3 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/common/tuners/tda18271-fe.c b/drivers/media/common/tuners/tda18271-fe.c
index bc4b004ba7d..64b935f9157 100644
--- a/drivers/media/common/tuners/tda18271-fe.c
+++ b/drivers/media/common/tuners/tda18271-fe.c
@@ -1017,9 +1017,17 @@ static int tda18271_sleep(struct dvb_frontend *fe)
 
 	mutex_lock(&priv->lock);
 
-	/* standby mode w/ slave tuner output
-	 * & loop thru & xtal oscillator on */
-	ret = tda18271_set_standby_mode(fe, 1, 0, 0);
+	switch (priv->standby_mode) {
+	case TDA18271_STANDBY_POWER_OFF:
+		ret = tda18271_set_standby_mode(fe, 1, 1, 1);
+		break;
+	case TDA18271_STANDBY_XT_ON:
+		ret = tda18271_set_standby_mode(fe, 1, 1, 0);
+		break;
+	case TDA18271_STANDBY_LT_XT_ON:
+	default:
+		ret = tda18271_set_standby_mode(fe, 1, 0, 0);
+	}
 
 	mutex_unlock(&priv->lock);
 
@@ -1199,6 +1207,8 @@ struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr,
 		priv->gate = (cfg) ? cfg->gate : TDA18271_GATE_AUTO;
 		priv->role = (cfg) ? cfg->role : TDA18271_MASTER;
 		priv->config = (cfg) ? cfg->config : 0;
+		priv->standby_mode = (cfg) ?
+			cfg->standby_mode : TDA18271_STANDBY_LT_XT_ON;
 
 		/* tda18271_cal_on_startup == -1 when cal
 		 * module option is unset */
diff --git a/drivers/media/common/tuners/tda18271-priv.h b/drivers/media/common/tuners/tda18271-priv.h
index e6a80ad0935..8c5fabcf5a2 100644
--- a/drivers/media/common/tuners/tda18271-priv.h
+++ b/drivers/media/common/tuners/tda18271-priv.h
@@ -108,6 +108,7 @@ struct tda18271_priv {
 	enum tda18271_role role;
 	enum tda18271_i2c_gate gate;
 	enum tda18271_ver id;
+	enum tda18271_standby_mode standby_mode;
 
 	unsigned int config; /* interface to saa713x / tda829x */
 	unsigned int tm_rfcal;
diff --git a/drivers/media/common/tuners/tda18271.h b/drivers/media/common/tuners/tda18271.h
index 71bac9593f1..9ca716f6b1f 100644
--- a/drivers/media/common/tuners/tda18271.h
+++ b/drivers/media/common/tuners/tda18271.h
@@ -67,6 +67,17 @@ enum tda18271_i2c_gate {
 	TDA18271_GATE_DIGITAL,
 };
 
+enum tda18271_standby_mode {
+	/* slave tuner output & loop thru & xtal oscillator on */
+	TDA18271_STANDBY_LT_XT_ON = 0,
+
+	/* xtal oscillator on */
+	TDA18271_STANDBY_XT_ON,
+
+	/* power off */
+	TDA18271_STANDBY_POWER_OFF,
+};
+
 struct tda18271_config {
 	/* override default if freq / std settings (optional) */
 	struct tda18271_std_map *std_map;
@@ -77,6 +88,9 @@ struct tda18271_config {
 	/* use i2c gate provided by analog or digital demod */
 	enum tda18271_i2c_gate gate;
 
+	/* allow lower power standby modes */
+	enum tda18271_standby_mode standby_mode;
+
 	/* force rf tracking filter calibration on startup */
 	unsigned int rf_cal_on_startup:1;
 
-- 
cgit v1.2.3


From 72c8364a662b7e995f86931dcb768b77bc44bca5 Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@kernellabs.com>
Date: Fri, 28 Aug 2009 18:52:26 -0300
Subject: V4L/DVB (12862): tda18271: add debug to show which standby mode is in
 use

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/common/tuners/tda18271-fe.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/common/tuners/tda18271-fe.c b/drivers/media/common/tuners/tda18271-fe.c
index 64b935f9157..dece8b67b99 100644
--- a/drivers/media/common/tuners/tda18271-fe.c
+++ b/drivers/media/common/tuners/tda18271-fe.c
@@ -1019,13 +1019,16 @@ static int tda18271_sleep(struct dvb_frontend *fe)
 
 	switch (priv->standby_mode) {
 	case TDA18271_STANDBY_POWER_OFF:
+		tda_dbg("standby mode: power off\n");
 		ret = tda18271_set_standby_mode(fe, 1, 1, 1);
 		break;
 	case TDA18271_STANDBY_XT_ON:
+		tda_dbg("standby mode: xtal oscillator on\n");
 		ret = tda18271_set_standby_mode(fe, 1, 1, 0);
 		break;
 	case TDA18271_STANDBY_LT_XT_ON:
 	default:
+		tda_dbg("standby mode: loop thru & xtal oscillator on\n");
 		ret = tda18271_set_standby_mode(fe, 1, 0, 0);
 	}
 
-- 
cgit v1.2.3


From 2dfca76303937f256e11754a716eb198b22afdd5 Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@kernellabs.com>
Date: Fri, 28 Aug 2009 20:53:30 -0300
Subject: V4L/DVB (12863): tda18271: add new standby mode: slave tuner output /
 loop thru on

Add new standby mode:
TDA18271_STANDBY_LT_ON = slave tuner output loop thru on w/ xtal osc off

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/common/tuners/tda18271-fe.c | 4 ++++
 drivers/media/common/tuners/tda18271.h    | 3 +++
 2 files changed, 7 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/common/tuners/tda18271-fe.c b/drivers/media/common/tuners/tda18271-fe.c
index dece8b67b99..9dcbdb17f74 100644
--- a/drivers/media/common/tuners/tda18271-fe.c
+++ b/drivers/media/common/tuners/tda18271-fe.c
@@ -1026,6 +1026,10 @@ static int tda18271_sleep(struct dvb_frontend *fe)
 		tda_dbg("standby mode: xtal oscillator on\n");
 		ret = tda18271_set_standby_mode(fe, 1, 1, 0);
 		break;
+	case TDA18271_STANDBY_LT_ON:
+		tda_dbg("standby mode: slave tuner output / loop thru on\n");
+		ret = tda18271_set_standby_mode(fe, 1, 0, 1);
+		break;
 	case TDA18271_STANDBY_LT_XT_ON:
 	default:
 		tda_dbg("standby mode: loop thru & xtal oscillator on\n");
diff --git a/drivers/media/common/tuners/tda18271.h b/drivers/media/common/tuners/tda18271.h
index 9ca716f6b1f..bf6ba099a6b 100644
--- a/drivers/media/common/tuners/tda18271.h
+++ b/drivers/media/common/tuners/tda18271.h
@@ -74,6 +74,9 @@ enum tda18271_standby_mode {
 	/* xtal oscillator on */
 	TDA18271_STANDBY_XT_ON,
 
+	/* slave tuner output / loop thru on */
+	TDA18271_STANDBY_LT_ON,
+
 	/* power off */
 	TDA18271_STANDBY_POWER_OFF,
 };
-- 
cgit v1.2.3


From 4240b460f0dbb4bf4e3f64e6abd423f476012756 Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@kernellabs.com>
Date: Sat, 29 Aug 2009 16:25:37 -0300
Subject: V4L/DVB (12864): tda18271: change output feature configuration to a
 bitmask

For better readability, treat the low power standby mode configuration
as an output option feature configuration, and change it to a bitmask.

If left unconfigured, all features will remain enabled, just as the
default configuration was before these changes were introduced.

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/common/tuners/tda18271-fe.c   | 47 ++++++++++++++++-------------
 drivers/media/common/tuners/tda18271-priv.h |  2 +-
 drivers/media/common/tuners/tda18271.h      | 21 ++++++-------
 3 files changed, 36 insertions(+), 34 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/common/tuners/tda18271-fe.c b/drivers/media/common/tuners/tda18271-fe.c
index 9dcbdb17f74..f6328bf3121 100644
--- a/drivers/media/common/tuners/tda18271-fe.c
+++ b/drivers/media/common/tuners/tda18271-fe.c
@@ -36,6 +36,27 @@ static LIST_HEAD(hybrid_tuner_instance_list);
 
 /*---------------------------------------------------------------------*/
 
+static int tda18271_toggle_output(struct dvb_frontend *fe, int standby)
+{
+	struct tda18271_priv *priv = fe->tuner_priv;
+
+	int ret = tda18271_set_standby_mode(fe, standby ? 1 : 0,
+			priv->output_opt & TDA18271_OUTPUT_LT_OFF ? 1 : 0,
+			priv->output_opt & TDA18271_OUTPUT_XT_OFF ? 1 : 0);
+
+	if (tda_fail(ret))
+		goto fail;
+
+	tda_dbg("%s mode: xtal oscillator %s, slave tuner loop thru %s\n",
+		standby ? "standby" : "active",
+		priv->output_opt & TDA18271_OUTPUT_XT_OFF ? "off" : "on",
+		priv->output_opt & TDA18271_OUTPUT_LT_OFF ? "off" : "on");
+fail:
+	return ret;
+}
+
+/*---------------------------------------------------------------------*/
+
 static inline int charge_pump_source(struct dvb_frontend *fe, int force)
 {
 	struct tda18271_priv *priv = fe->tuner_priv;
@@ -800,7 +821,7 @@ static int tda18271_init(struct dvb_frontend *fe)
 
 	mutex_lock(&priv->lock);
 
-	/* power up */
+	/* full power up */
 	ret = tda18271_set_standby_mode(fe, 0, 0, 0);
 	if (tda_fail(ret))
 		goto fail;
@@ -1017,24 +1038,8 @@ static int tda18271_sleep(struct dvb_frontend *fe)
 
 	mutex_lock(&priv->lock);
 
-	switch (priv->standby_mode) {
-	case TDA18271_STANDBY_POWER_OFF:
-		tda_dbg("standby mode: power off\n");
-		ret = tda18271_set_standby_mode(fe, 1, 1, 1);
-		break;
-	case TDA18271_STANDBY_XT_ON:
-		tda_dbg("standby mode: xtal oscillator on\n");
-		ret = tda18271_set_standby_mode(fe, 1, 1, 0);
-		break;
-	case TDA18271_STANDBY_LT_ON:
-		tda_dbg("standby mode: slave tuner output / loop thru on\n");
-		ret = tda18271_set_standby_mode(fe, 1, 0, 1);
-		break;
-	case TDA18271_STANDBY_LT_XT_ON:
-	default:
-		tda_dbg("standby mode: loop thru & xtal oscillator on\n");
-		ret = tda18271_set_standby_mode(fe, 1, 0, 0);
-	}
+	/* enter standby mode, with required output features enabled */
+	ret = tda18271_toggle_output(fe, 1);
 
 	mutex_unlock(&priv->lock);
 
@@ -1214,8 +1219,8 @@ struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr,
 		priv->gate = (cfg) ? cfg->gate : TDA18271_GATE_AUTO;
 		priv->role = (cfg) ? cfg->role : TDA18271_MASTER;
 		priv->config = (cfg) ? cfg->config : 0;
-		priv->standby_mode = (cfg) ?
-			cfg->standby_mode : TDA18271_STANDBY_LT_XT_ON;
+		priv->output_opt = (cfg) ?
+			cfg->output_opt : TDA18271_OUTPUT_LT_XT_ON;
 
 		/* tda18271_cal_on_startup == -1 when cal
 		 * module option is unset */
diff --git a/drivers/media/common/tuners/tda18271-priv.h b/drivers/media/common/tuners/tda18271-priv.h
index 8c5fabcf5a2..2bee229acd9 100644
--- a/drivers/media/common/tuners/tda18271-priv.h
+++ b/drivers/media/common/tuners/tda18271-priv.h
@@ -108,7 +108,7 @@ struct tda18271_priv {
 	enum tda18271_role role;
 	enum tda18271_i2c_gate gate;
 	enum tda18271_ver id;
-	enum tda18271_standby_mode standby_mode;
+	enum tda18271_output_options output_opt;
 
 	unsigned int config; /* interface to saa713x / tda829x */
 	unsigned int tm_rfcal;
diff --git a/drivers/media/common/tuners/tda18271.h b/drivers/media/common/tuners/tda18271.h
index bf6ba099a6b..323f2912128 100644
--- a/drivers/media/common/tuners/tda18271.h
+++ b/drivers/media/common/tuners/tda18271.h
@@ -67,18 +67,15 @@ enum tda18271_i2c_gate {
 	TDA18271_GATE_DIGITAL,
 };
 
-enum tda18271_standby_mode {
-	/* slave tuner output & loop thru & xtal oscillator on */
-	TDA18271_STANDBY_LT_XT_ON = 0,
+enum tda18271_output_options {
+	/* slave tuner output & loop thru & xtal oscillator always on */
+	TDA18271_OUTPUT_LT_XT_ON = 0,
 
-	/* xtal oscillator on */
-	TDA18271_STANDBY_XT_ON,
+	/* slave tuner output loop thru off */
+	TDA18271_OUTPUT_LT_OFF = 1,
 
-	/* slave tuner output / loop thru on */
-	TDA18271_STANDBY_LT_ON,
-
-	/* power off */
-	TDA18271_STANDBY_POWER_OFF,
+	/* xtal oscillator off */
+	TDA18271_OUTPUT_XT_OFF = 2,
 };
 
 struct tda18271_config {
@@ -91,8 +88,8 @@ struct tda18271_config {
 	/* use i2c gate provided by analog or digital demod */
 	enum tda18271_i2c_gate gate;
 
-	/* allow lower power standby modes */
-	enum tda18271_standby_mode standby_mode;
+	/* output options that can be disabled */
+	enum tda18271_output_options output_opt;
 
 	/* force rf tracking filter calibration on startup */
 	unsigned int rf_cal_on_startup:1;
-- 
cgit v1.2.3


From cc7e26d47f327a928e241b8d59b9203b469d692e Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@kernellabs.com>
Date: Sat, 29 Aug 2009 16:27:21 -0300
Subject: V4L/DVB (12865): tda18271: move tda18271_sleep directly below
 tda18271_init

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/common/tuners/tda18271-fe.c | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/common/tuners/tda18271-fe.c b/drivers/media/common/tuners/tda18271-fe.c
index f6328bf3121..e86d16979e7 100644
--- a/drivers/media/common/tuners/tda18271-fe.c
+++ b/drivers/media/common/tuners/tda18271-fe.c
@@ -839,6 +839,21 @@ fail:
 	return ret;
 }
 
+static int tda18271_sleep(struct dvb_frontend *fe)
+{
+	struct tda18271_priv *priv = fe->tuner_priv;
+	int ret;
+
+	mutex_lock(&priv->lock);
+
+	/* enter standby mode, with required output features enabled */
+	ret = tda18271_toggle_output(fe, 1);
+
+	mutex_unlock(&priv->lock);
+
+	return ret;
+}
+
 /* ------------------------------------------------------------------ */
 
 static int tda18271_agc(struct dvb_frontend *fe)
@@ -1031,21 +1046,6 @@ fail:
 	return ret;
 }
 
-static int tda18271_sleep(struct dvb_frontend *fe)
-{
-	struct tda18271_priv *priv = fe->tuner_priv;
-	int ret;
-
-	mutex_lock(&priv->lock);
-
-	/* enter standby mode, with required output features enabled */
-	ret = tda18271_toggle_output(fe, 1);
-
-	mutex_unlock(&priv->lock);
-
-	return ret;
-}
-
 static int tda18271_release(struct dvb_frontend *fe)
 {
 	struct tda18271_priv *priv = fe->tuner_priv;
-- 
cgit v1.2.3


From 1216531a1f416df24f67ca8e626df9b3c91e5c75 Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@kernellabs.com>
Date: Sun, 30 Aug 2009 02:32:23 -0300
Subject: V4L/DVB (12866): tda18271: move small_i2c assignment to the state
 config block

minor cleanup: move small_i2c assignment to the state config block

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/common/tuners/tda18271-fe.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/common/tuners/tda18271-fe.c b/drivers/media/common/tuners/tda18271-fe.c
index e86d16979e7..063c7987d31 100644
--- a/drivers/media/common/tuners/tda18271-fe.c
+++ b/drivers/media/common/tuners/tda18271-fe.c
@@ -1219,6 +1219,7 @@ struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr,
 		priv->gate = (cfg) ? cfg->gate : TDA18271_GATE_AUTO;
 		priv->role = (cfg) ? cfg->role : TDA18271_MASTER;
 		priv->config = (cfg) ? cfg->config : 0;
+		priv->small_i2c = (cfg) ? cfg->small_i2c : 0;
 		priv->output_opt = (cfg) ?
 			cfg->output_opt : TDA18271_OUTPUT_LT_XT_ON;
 
@@ -1238,9 +1239,6 @@ struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr,
 
 		fe->tuner_priv = priv;
 
-		if (cfg)
-			priv->small_i2c = cfg->small_i2c;
-
 		if (tda_fail(tda18271_get_id(fe)))
 			goto fail;
 
-- 
cgit v1.2.3


From d5abef6be1715040ac50e834bc042031f7613fa9 Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@kernellabs.com>
Date: Sun, 30 Aug 2009 03:07:10 -0300
Subject: V4L/DVB (12867): tda18271: ensure that configuration options are set
 for multiple instances

For the case of multiple tuner instances, ensure that non-default
configuration options are saved into the driver's state.

This resolves an issue where a configuration option may not be
carried into the driver if the analog side of a hybrid driver
initializes before the digital side.

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/common/tuners/tda18271-fe.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/common/tuners/tda18271-fe.c b/drivers/media/common/tuners/tda18271-fe.c
index 063c7987d31..152df76cdce 100644
--- a/drivers/media/common/tuners/tda18271-fe.c
+++ b/drivers/media/common/tuners/tda18271-fe.c
@@ -1258,9 +1258,19 @@ struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr,
 		/* existing tuner instance */
 		fe->tuner_priv = priv;
 
-		/* allow dvb driver to override i2c gate setting */
-		if ((cfg) && (cfg->gate != TDA18271_GATE_ANALOG))
-			priv->gate = cfg->gate;
+		/* allow dvb driver to override configuration settings */
+		if (cfg) {
+			if (cfg->gate != TDA18271_GATE_ANALOG)
+				priv->gate = cfg->gate;
+			if (cfg->role)
+				priv->role = cfg->role;
+			if (cfg->config)
+				priv->config = cfg->config;
+			if (cfg->small_i2c)
+				priv->small_i2c = cfg->small_i2c;
+			if (cfg->output_opt)
+				priv->output_opt = cfg->output_opt;
+		}
 		break;
 	}
 
-- 
cgit v1.2.3


From 650901c0b6917505e81f6593d230ea3cdcf6518a Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@kernellabs.com>
Date: Sat, 5 Sep 2009 19:01:56 -0300
Subject: V4L/DVB (12868): tda18271: improve error log in function
 tda18271_write_regs

Display function parameters, idx and len, in error log.

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/common/tuners/tda18271-common.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/common/tuners/tda18271-common.c b/drivers/media/common/tuners/tda18271-common.c
index fc76c30e24f..155c93eb75d 100644
--- a/drivers/media/common/tuners/tda18271-common.c
+++ b/drivers/media/common/tuners/tda18271-common.c
@@ -210,7 +210,8 @@ int tda18271_write_regs(struct dvb_frontend *fe, int idx, int len)
 	tda18271_i2c_gate_ctrl(fe, 0);
 
 	if (ret != 1)
-		tda_err("ERROR: i2c_transfer returned: %d\n", ret);
+		tda_err("ERROR: idx = 0x%x, len = %d, "
+			"i2c_transfer returned: %d\n", idx, len, ret);
 
 	return (ret == 1 ? 0 : ret);
 }
-- 
cgit v1.2.3


From ecda427340b7bb5c61fbf18857645286c2bfec6c Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@kernellabs.com>
Date: Sun, 6 Sep 2009 14:38:48 -0300
Subject: V4L/DVB (12869): tda18271: fix comments and make tda18271_agc debug
 less verbose

Don't display "no agc configuration provided" unless DBG_ADV is set.

Fix comments in function, tda18271_agc.  This config variable is not
for LNA configuration -- it is for external AGC configuration.

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/common/tuners/tda18271-fe.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/common/tuners/tda18271-fe.c b/drivers/media/common/tuners/tda18271-fe.c
index 152df76cdce..916a6e15086 100644
--- a/drivers/media/common/tuners/tda18271-fe.c
+++ b/drivers/media/common/tuners/tda18271-fe.c
@@ -863,8 +863,9 @@ static int tda18271_agc(struct dvb_frontend *fe)
 
 	switch (priv->config) {
 	case 0:
-		/* no LNA */
-		tda_dbg("no agc configuration provided\n");
+		/* no external agc configuration required */
+		if (tda18271_debug & DBG_ADV)
+			tda_dbg("no agc configuration provided\n");
 		break;
 	case 3:
 		/* switch with GPIO of saa713x */
-- 
cgit v1.2.3


From b5d189702b56c5d09bec71798c0314090b36116d Mon Sep 17 00:00:00 2001
From: Henk Vergonet <Henk.Vergonet@gmail.com>
Date: Tue, 15 Sep 2009 02:09:17 -0300
Subject: V4L/DVB (12870): tda18271: update temperature compensation
 calculatation formula

Update the tda18271c2_rf_tracking_filters_correction function to include
the modified temperature compensation calculatation formula as described
in Rev.04 of the TDA18271HD datasheet.

Signed-off-by: Henk Vergonet <Henk.Vergonet@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/common/tuners/tda18271-fe.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/common/tuners/tda18271-fe.c b/drivers/media/common/tuners/tda18271-fe.c
index 916a6e15086..64595112000 100644
--- a/drivers/media/common/tuners/tda18271-fe.c
+++ b/drivers/media/common/tuners/tda18271-fe.c
@@ -292,7 +292,7 @@ static int tda18271c2_rf_tracking_filters_correction(struct dvb_frontend *fe,
 	tda18271_lookup_map(fe, RF_CAL_DC_OVER_DT, &freq, &dc_over_dt);
 
 	/* calculate temperature compensation */
-	rfcal_comp = dc_over_dt * (tm_current - priv->tm_rfcal);
+	rfcal_comp = dc_over_dt * (tm_current - priv->tm_rfcal) / 1000;
 
 	regs[R_EB14] = approx + rfcal_comp;
 	ret = tda18271_write_regs(fe, R_EB14, 1);
-- 
cgit v1.2.3


From d1f7510b9179ef7249db08e50d51654f1bf8e261 Mon Sep 17 00:00:00 2001
From: Henk Vergonet <Henk.Vergonet@gmail.com>
Date: Tue, 15 Sep 2009 02:25:35 -0300
Subject: V4L/DVB (12871): tda18271: fix bad data in tda18271_cid_target table

Fixed one value and removed a duplicate in tda18271_cid_target[],
based on table 54 "CID_Target_map" in Rev.04 of the TDA18271HD datasheet.

Signed-off-by: Henk Vergonet <Henk.Vergonet@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/common/tuners/tda18271-maps.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/common/tuners/tda18271-maps.c b/drivers/media/common/tuners/tda18271-maps.c
index ab14ceb9e0c..e21fdeff3dd 100644
--- a/drivers/media/common/tuners/tda18271-maps.c
+++ b/drivers/media/common/tuners/tda18271-maps.c
@@ -962,10 +962,9 @@ struct tda18271_cid_target_map {
 static struct tda18271_cid_target_map tda18271_cid_target[] = {
 	{ .rfmax =  46000, .target = 0x04, .limit =  1800 },
 	{ .rfmax =  52200, .target = 0x0a, .limit =  1500 },
-	{ .rfmax =  79100, .target = 0x01, .limit =  4000 },
+	{ .rfmax =  70100, .target = 0x01, .limit =  4000 },
 	{ .rfmax = 136800, .target = 0x18, .limit =  4000 },
 	{ .rfmax = 156700, .target = 0x18, .limit =  4000 },
-	{ .rfmax = 156700, .target = 0x18, .limit =  4000 },
 	{ .rfmax = 186250, .target = 0x0a, .limit =  4000 },
 	{ .rfmax = 230000, .target = 0x0a, .limit =  4000 },
 	{ .rfmax = 345000, .target = 0x18, .limit =  4000 },
-- 
cgit v1.2.3


From 542cb057368ab9450c51a331e65eea5aa9d7c008 Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@kernellabs.com>
Date: Sat, 29 Aug 2009 17:45:48 -0300
Subject: V4L/DVB (12873): saa7134: disable tda18271 slave tuner output / loop
 thru in standby mode

Enable the standby mode optimization to disable the tda18271
slave tuner output / loop thru options when in low power mode

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7134/saa7134-dvb.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
index ebde21dba7e..7e1ffd8ba26 100644
--- a/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/drivers/media/video/saa7134/saa7134-dvb.c
@@ -1007,6 +1007,7 @@ static struct tda18271_config hcw_tda18271_config = {
 	.std_map = &hauppauge_tda18271_std_map,
 	.gate    = TDA18271_GATE_ANALOG,
 	.config  = 3,
+	.output_opt = TDA18271_OUTPUT_LT_OFF,
 };
 
 static struct tda829x_config tda829x_no_probe = {
-- 
cgit v1.2.3


From a18eaf02c8cd60ad1e6cec3fa0d04a568d31801a Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@kernellabs.com>
Date: Sat, 29 Aug 2009 17:47:01 -0300
Subject: V4L/DVB (12874): pvrusb2: disable tda18271 slave tuner output / loop
 thru in standby mode

Enable the standby mode optimization to disable the tda18271
slave tuner output / loop thru options when in low power mode

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/pvrusb2/pvrusb2-devattr.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.c b/drivers/media/video/pvrusb2/pvrusb2-devattr.c
index 336a20eded0..e4d7c13cab8 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-devattr.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.c
@@ -298,6 +298,7 @@ static struct tda829x_config tda829x_no_probe = {
 
 static struct tda18271_config hauppauge_tda18271_dvb_config = {
 	.gate    = TDA18271_GATE_ANALOG,
+	.output_opt = TDA18271_OUTPUT_LT_OFF,
 };
 
 static int pvr2_tda10048_attach(struct pvr2_dvb_adapter *adap)
@@ -393,6 +394,7 @@ static struct tda18271_std_map hauppauge_tda18271_std_map = {
 static struct tda18271_config hauppauge_tda18271_config = {
 	.std_map = &hauppauge_tda18271_std_map,
 	.gate    = TDA18271_GATE_ANALOG,
+	.output_opt = TDA18271_OUTPUT_LT_OFF,
 };
 
 static int pvr2_s5h1409_attach(struct pvr2_dvb_adapter *adap)
-- 
cgit v1.2.3


From 04a68baa20d8faa0fb5f2924a1169280961be643 Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@kernellabs.com>
Date: Sun, 6 Sep 2009 14:11:09 -0300
Subject: V4L/DVB (12875): cx23885: disable tda18271 slave tuner output / loop
 thru in standby mode

Enable the standby mode optimization to disable the tda18271
slave tuner output / loop thru options when in low power mode

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx23885/cx23885-dvb.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index 022fad798fc..2519b27a370 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -255,15 +255,18 @@ static struct tda18271_std_map hauppauge_hvr1200_tda18271_std_map = {
 static struct tda18271_config hauppauge_tda18271_config = {
 	.std_map = &hauppauge_tda18271_std_map,
 	.gate    = TDA18271_GATE_ANALOG,
+	.output_opt = TDA18271_OUTPUT_LT_OFF,
 };
 
 static struct tda18271_config hauppauge_hvr1200_tuner_config = {
 	.std_map = &hauppauge_hvr1200_tda18271_std_map,
 	.gate    = TDA18271_GATE_ANALOG,
+	.output_opt = TDA18271_OUTPUT_LT_OFF,
 };
 
 static struct tda18271_config hauppauge_hvr1210_tuner_config = {
 	.gate    = TDA18271_GATE_DIGITAL,
+	.output_opt = TDA18271_OUTPUT_LT_OFF,
 };
 
 static struct tda18271_std_map hauppauge_hvr127x_std_map = {
@@ -275,6 +278,7 @@ static struct tda18271_std_map hauppauge_hvr127x_std_map = {
 
 static struct tda18271_config hauppauge_hvr127x_config = {
 	.std_map = &hauppauge_hvr127x_std_map,
+	.output_opt = TDA18271_OUTPUT_LT_OFF,
 };
 
 static struct lgdt3305_config hauppauge_lgdt3305_config = {
-- 
cgit v1.2.3


From 9760677417c27ea59442cc748ee0b8d5f44162d3 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Erik=20Andr=C3=A9n?= <erik.andren@gmail.com>
Date: Wed, 1 Jul 2009 02:49:23 -0300
Subject: V4L/DVB (12877): gspca - m5602-s5k4aa: Add vflip quirk for the Amilo
 Pa 2548
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Add vflip quirk for the Fujitsu Siemens Amilo Pa 2548

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/m5602/m5602_s5k4aa.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
index 0163903d1c0..489fabd3662 100644
--- a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
+++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
@@ -46,6 +46,12 @@ static
 			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 2550")
 		}
+	}, {
+		.ident = "Fujitsu-Siemens Amilo Pa 2548",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pa 2548")
+		}
 	}, {
 		.ident = "MSI GX700",
 		.matches = {
-- 
cgit v1.2.3


From 95e6dcd1bbb98ea215ad22585743ef9e60cfa3ff Mon Sep 17 00:00:00 2001
From: Brian Kloppenborg <bkloppenborg@gmail.com>
Date: Sun, 30 Aug 2009 09:43:40 -0300
Subject: V4L/DVB (12878): gspca - m5602-s5k4aa: Add vflip quirk for the GX700
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The MSI GX700 is a tricky machine to support. Some revisions do need the sensor flipped, but not all.
Add another quirk, distinguished by its BIOS date.

Signed-off-by: Brian Kloppenborg <bkloppenborg@gmail.com>
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/m5602/m5602_s5k4aa.c | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
index 489fabd3662..59400e85896 100644
--- a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
+++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
@@ -59,6 +59,13 @@ static
 			DMI_MATCH(DMI_PRODUCT_NAME, "GX700"),
 			DMI_MATCH(DMI_BIOS_DATE, "07/26/2007")
 		}
+	}, {
+		.ident = "MSI GX700",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "GX700"),
+			DMI_MATCH(DMI_BIOS_DATE, "07/19/2007")
+		}
 	}, {
 		.ident = "MSI GX700/GX705/EX700",
 		.matches = {
-- 
cgit v1.2.3


From cb0409ffb7fa83a9ab561fe7e551ba8f817ca148 Mon Sep 17 00:00:00 2001
From: Devin Heitmueller <dheitmueller@kernellabs.com>
Date: Tue, 15 Sep 2009 00:10:15 -0300
Subject: V4L/DVB (12880): em28xx: fix codingstyle issues introduced with VBI
 support

Fix a few codingstyle issues introduced when I was adding the VBI support to
the em28xx driver.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/em28xx/em28xx-vbi.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/em28xx/em28xx-vbi.c b/drivers/media/video/em28xx/em28xx-vbi.c
index 27d7e860fa5..070d8e57877 100644
--- a/drivers/media/video/em28xx/em28xx-vbi.c
+++ b/drivers/media/video/em28xx/em28xx-vbi.c
@@ -29,14 +29,14 @@
 #include "em28xx.h"
 
 static unsigned int vbibufs = 5;
-module_param(vbibufs,int,0644);
-MODULE_PARM_DESC(vbibufs,"number of vbi buffers, range 2-32");
+module_param(vbibufs, int, 0644);
+MODULE_PARM_DESC(vbibufs, "number of vbi buffers, range 2-32");
 
 static unsigned int vbi_debug;
-module_param(vbi_debug,int,0644);
-MODULE_PARM_DESC(vbi_debug,"enable debug messages [vbi]");
+module_param(vbi_debug, int, 0644);
+MODULE_PARM_DESC(vbi_debug, "enable debug messages [vbi]");
 
-#define dprintk(level,fmt, arg...)	if (vbi_debug >= level) \
+#define dprintk(level, fmt, arg...)	if (vbi_debug >= level) \
 	printk(KERN_DEBUG "%s: " fmt, dev->core->name , ## arg)
 
 /* ------------------------------------------------------------------ */
-- 
cgit v1.2.3


From e3ba4d34d031985366f7ea06395fa9772ff77ce6 Mon Sep 17 00:00:00 2001
From: Devin Heitmueller <dheitmueller@kernellabs.com>
Date: Tue, 15 Sep 2009 00:18:06 -0300
Subject: V4L/DVB (12881): em28xx: fix codingstyle issues in em28xx-video.c

Fix some codingstyle issues introduced during the addition of em28xx VBI
support.  The patch makes no functional changes other than converting a few
debug printk() statements to em28xx_isocdbg.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/em28xx/em28xx-video.c | 39 +++++++++++++++++--------------
 1 file changed, 21 insertions(+), 18 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 2466c0faf3c..3a1dfb7726f 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -256,7 +256,8 @@ static void em28xx_copy_video(struct em28xx *dev,
 
 		if ((char *)startwrite + lencopy > (char *)outp +
 		    buf->vb.size) {
-			em28xx_isocdbg("Overflow of %zi bytes past buffer end (2)\n",
+			em28xx_isocdbg("Overflow of %zi bytes past buffer end"
+				       "(2)\n",
 				       ((char *)startwrite + lencopy) -
 				       ((char *)outp + buf->vb.size));
 			lencopy = remain = (char *)outp + buf->vb.size -
@@ -284,23 +285,23 @@ static void em28xx_copy_vbi(struct em28xx *dev,
 	int bytesperline = 720;
 
 	if (dev == NULL) {
-		printk("dev is null\n");
+		em28xx_isocdbg("dev is null\n");
 		return;
 	}
 
 	if (dma_q == NULL) {
-		printk("dma_q is null\n");
+		em28xx_isocdbg("dma_q is null\n");
 		return;
 	}
 	if (buf == NULL) {
 		return;
 	}
 	if (p == NULL) {
-		printk("p is null\n");
+		em28xx_isocdbg("p is null\n");
 		return;
 	}
 	if (outp == NULL) {
-		printk("outp is null\n");
+		em28xx_isocdbg("outp is null\n");
 		return;
 	}
 
@@ -584,7 +585,7 @@ static inline int em28xx_isoc_copy_vbi(struct em28xx *dev, struct urb *urb)
 			if (dev->vbi_read >= vbi_size) {
 				/* We've already read all the VBI data, so
 				   treat the rest as video */
-				printk("djh c should never happen\n");
+				em28xx_isocdbg("dev->vbi_read > vbi_size\n");
 			} else if ((dev->vbi_read + len) < vbi_size) {
 				/* This entire frame is VBI data */
 				if (dev->vbi_read == 0 &&
@@ -597,9 +598,9 @@ static inline int em28xx_isoc_copy_vbi(struct em28xx *dev, struct urb *urb)
 					vbi_get_next_buf(vbi_dma_q, &vbi_buf);
 					if (vbi_buf == NULL)
 						vbioutp = NULL;
-					else {
-						vbioutp = videobuf_to_vmalloc(&vbi_buf->vb);
-					}
+					else
+						vbioutp = videobuf_to_vmalloc(
+							&vbi_buf->vb);
 				}
 
 				if (dev->vbi_read == 0) {
@@ -669,7 +670,8 @@ buffer_setup(struct videobuf_queue *vq, unsigned int *count, unsigned int *size)
 	struct em28xx        *dev = fh->dev;
 	struct v4l2_frequency f;
 
-	*size = (fh->dev->width * fh->dev->height * dev->format->depth + 7) >> 3;
+	*size = (fh->dev->width * fh->dev->height * dev->format->depth + 7)
+		>> 3;
 
 	if (0 == *count)
 		*count = EM28XX_DEF_BUF;
@@ -723,7 +725,8 @@ buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb,
 	struct em28xx        *dev = fh->dev;
 	int                  rc = 0, urb_init = 0;
 
-	buf->vb.size = (fh->dev->width * fh->dev->height * dev->format->depth + 7) >> 3;
+	buf->vb.size = (fh->dev->width * fh->dev->height * dev->format->depth
+			+ 7) >> 3;
 
 	if (0 != buf->vb.baddr  &&  buf->vb.bsize < buf->vb.size)
 		return -EINVAL;
@@ -858,12 +861,12 @@ static int res_get(struct em28xx_fh *fh, unsigned int bit)
 
 static int res_check(struct em28xx_fh *fh, unsigned int bit)
 {
-	return (fh->resources & bit);
+	return fh->resources & bit;
 }
 
 static int res_locked(struct em28xx *dev, unsigned int bit)
 {
-	return (dev->resources & bit);
+	return dev->resources & bit;
 }
 
 static void res_free(struct em28xx_fh *fh, unsigned int bits)
@@ -1066,7 +1069,8 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
 	} else {
 		/* width must even because of the YUYV format
 		   height must be even because of interlacing */
-		v4l_bound_align_image(&width, 48, maxw, 1, &height, 32, maxh, 1, 0);
+		v4l_bound_align_image(&width, 48, maxw, 1, &height, 32, maxh,
+				      1, 0);
 	}
 
 	get_scale(dev, width, height, &hscale, &vscale);
@@ -1718,7 +1722,7 @@ static int vidioc_streamon(struct file *file, void *priv,
 	em28xx_videodbg("vidioc_streamon fh=%p t=%d fh->res=%d dev->res=%d\n",
 			fh, type, fh->resources, dev->resources);
 
-	if (unlikely(!res_get(fh,get_ressource(fh))))
+	if (unlikely(!res_get(fh, get_ressource(fh))))
 		return -EBUSY;
 
 	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
@@ -1941,9 +1945,8 @@ static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *b)
 
 	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
 		return videobuf_qbuf(&fh->vb_vidq, b);
-	else {
+	else
 		return videobuf_qbuf(&fh->vb_vbiq, b);
-	}
 }
 
 static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b)
@@ -2212,7 +2215,7 @@ static int em28xx_v4l2_close(struct file *filp)
 		res_free(fh, EM28XX_RESOURCE_VBI);
 	}
 
-	if(dev->users == 1) {
+	if (dev->users == 1) {
 		/* the device is already disconnect,
 		   free the remaining resources */
 		if (dev->state & DEV_DISCONNECTED) {
-- 
cgit v1.2.3


From 0e12e1536c1b8aaef9baeed09a8f81da393fcba6 Mon Sep 17 00:00:00 2001
From: Devin Heitmueller <dheitmueller@kernellabs.com>
Date: Tue, 15 Sep 2009 00:20:29 -0300
Subject: V4L/DVB (12882): em28xx: remove text editor tags from em28xx-vbi.c

Remove some emacs tags from em28xx-vbi.c, which were copied from cx88-vbi.c,
per Mauro Carvalho Chehab's request.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/em28xx/em28xx-vbi.c | 7 -------
 1 file changed, 7 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/em28xx/em28xx-vbi.c b/drivers/media/video/em28xx/em28xx-vbi.c
index 070d8e57877..94943e5a152 100644
--- a/drivers/media/video/em28xx/em28xx-vbi.c
+++ b/drivers/media/video/em28xx/em28xx-vbi.c
@@ -140,10 +140,3 @@ struct videobuf_queue_ops em28xx_vbi_qops = {
 	.buf_queue    = vbi_queue,
 	.buf_release  = vbi_release,
 };
-
-/* ------------------------------------------------------------------ */
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
-- 
cgit v1.2.3


From 958411bc484d15c3c3f7579b84b57d3b9d80ff21 Mon Sep 17 00:00:00 2001
From: Andy Walls <awalls@radix.net>
Date: Mon, 7 Sep 2009 14:32:45 -0300
Subject: V4L/DVB (12884): cx18: Eliminate warning about discarding 'const' is
 assignment for IR init

i2c-kbd-i2c allows a bridge driver to pass information about IR configuration,
but uses a "void *" to pass along what is essentially constant data.  This
change casts a const * to a void * to remove the warning.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx18/cx18-i2c.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/cx18/cx18-i2c.c b/drivers/media/video/cx18/cx18-i2c.c
index da395fef50d..dbbf93d2eee 100644
--- a/drivers/media/video/cx18/cx18-i2c.c
+++ b/drivers/media/video/cx18/cx18-i2c.c
@@ -116,7 +116,7 @@ static int cx18_i2c_new_ir(struct i2c_adapter *adap, u32 hw, const char *type,
 	/* Our default information for ir-kbd-i2c.c to use */
 	switch (hw) {
 	case CX18_HW_Z8F0811_IR_RX_HAUP:
-		info.platform_data = &z8f0811_ir_init_data;
+		info.platform_data = (void *) &z8f0811_ir_init_data;
 		break;
 	default:
 		break;
-- 
cgit v1.2.3


From 74b76f213640b4ebde9134d94a8013dbfecfcd93 Mon Sep 17 00:00:00 2001
From: Olivier Grenie <olivier.grenie@dibcom.fr>
Date: Wed, 2 Sep 2009 08:19:19 -0300
Subject: V4L/DVB (12886): Added new Pinnacle USB devices

Added Pinnacle PCTV USB devices based on PCTV 73e.

Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/dvb-usb/dib0700_devices.c | 40 ++++++++++++++++++++++++++++-
 drivers/media/dvb/dvb-usb/dvb-usb-ids.h     |  3 +++
 2 files changed, 42 insertions(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index d1d6f449140..ec0dd255c0e 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -1500,7 +1500,10 @@ struct usb_device_id dib0700_usb_id_table[] = {
 	{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_T3) },
 	{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_T5) },
 	{ USB_DEVICE(USB_VID_YUAN,      USB_PID_YUAN_STK7700D) },
-	{ USB_DEVICE(USB_VID_YUAN,	USB_PID_YUAN_STK7700D_2) },
+/* 55 */{ USB_DEVICE(USB_VID_YUAN,	USB_PID_YUAN_STK7700D_2) },
+	{ USB_DEVICE(USB_VID_PINNACLE,	USB_PID_PINNACLE_PCTV73A) },
+	{ USB_DEVICE(USB_VID_PINNACLE,	USB_PID_PINNACLE_PCTV73ESE) },
+	{ USB_DEVICE(USB_VID_PINNACLE,	USB_PID_PINNACLE_PCTV282E) },
 	{ 0 }		/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
@@ -1762,6 +1765,41 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 		.rc_key_map_size  = ARRAY_SIZE(dib0700_rc_keys),
 		.rc_query         = dib0700_rc_query
 
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+		.num_adapters = 1,
+		.adapter = {
+			{
+				.frontend_attach  = stk7070p_frontend_attach,
+				.tuner_attach     = dib7070p_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+
+				.size_of_priv     = sizeof(struct dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 3,
+		.devices = {
+			{   "Pinnacle PCTV 73A",
+				{ &dib0700_usb_id_table[56], NULL },
+				{ NULL },
+			},
+			{   "Pinnacle PCTV 73e SE",
+				{ &dib0700_usb_id_table[57], NULL },
+				{ NULL },
+			},
+			{   "Pinnacle PCTV 282e",
+				{ &dib0700_usb_id_table[58], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc_interval      = DEFAULT_RC_INTERVAL,
+		.rc_key_map       = dib0700_rc_keys,
+		.rc_key_map_size  = ARRAY_SIZE(dib0700_rc_keys),
+		.rc_query         = dib0700_rc_query
+
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 
 		.num_adapters = 2,
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index 185a5069b10..eec5604dcdd 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -195,6 +195,9 @@
 #define USB_PID_PINNACLE_PCTV73E			0x0237
 #define USB_PID_PINNACLE_PCTV801E			0x023a
 #define USB_PID_PINNACLE_PCTV801E_SE			0x023b
+#define USB_PID_PINNACLE_PCTV73A			0x0243
+#define USB_PID_PINNACLE_PCTV73ESE			0x0245
+#define USB_PID_PINNACLE_PCTV282E			0x0248
 #define USB_PID_PCTV_200E				0x020e
 #define USB_PID_PCTV_400E				0x020f
 #define USB_PID_PCTV_450E				0x0222
-- 
cgit v1.2.3


From ef80196490d6533e74a49509112804aa88a21c6f Mon Sep 17 00:00:00 2001
From: Olivier Grenie <olivier.grenie@dibcom.fr>
Date: Tue, 15 Sep 2009 06:46:52 -0300
Subject: V4L/DVB (12887): DIB7000P: SNR calcuation forr DiB7000P

Add the SNR monitoring for the dib7000p. The result is in dB.

Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/frontends/dib7000p.c | 33 ++++++++++++++++++++++++++++++++-
 1 file changed, 32 insertions(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/frontends/dib7000p.c b/drivers/media/dvb/frontends/dib7000p.c
index fc96fbf03d6..55ef6eeb076 100644
--- a/drivers/media/dvb/frontends/dib7000p.c
+++ b/drivers/media/dvb/frontends/dib7000p.c
@@ -10,6 +10,7 @@
 #include <linux/kernel.h>
 #include <linux/i2c.h>
 
+#include "dvb_math.h"
 #include "dvb_frontend.h"
 
 #include "dib7000p.h"
@@ -1217,7 +1218,37 @@ static int dib7000p_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
 
 static int dib7000p_read_snr(struct dvb_frontend* fe, u16 *snr)
 {
-	*snr = 0x0000;
+	struct dib7000p_state *state = fe->demodulator_priv;
+	u16 val;
+	s32 signal_mant, signal_exp, noise_mant, noise_exp;
+	u32 result = 0;
+
+	val = dib7000p_read_word(state, 479);
+	noise_mant = (val >> 4) & 0xff;
+	noise_exp = ((val & 0xf) << 2);
+	val = dib7000p_read_word(state, 480);
+	noise_exp += ((val >> 14) & 0x3);
+	if ((noise_exp & 0x20) != 0)
+		noise_exp -= 0x40;
+
+	signal_mant = (val >> 6) & 0xFF;
+	signal_exp  = (val & 0x3F);
+	if ((signal_exp & 0x20) != 0)
+		signal_exp -= 0x40;
+
+	if (signal_mant != 0)
+		result = intlog10(2) * 10 * signal_exp + 10 *
+			intlog10(signal_mant);
+	else
+		result = intlog10(2) * 10 * signal_exp - 100;
+
+	if (noise_mant != 0)
+		result -= intlog10(2) * 10 * noise_exp + 10 *
+			intlog10(noise_mant);
+	else
+		result -= intlog10(2) * 10 * noise_exp - 100;
+
+	*snr = result / ((1 << 24) / 10);
 	return 0;
 }
 
-- 
cgit v1.2.3


From d300bd691464ffb87342e375793ac2418e66c3f3 Mon Sep 17 00:00:00 2001
From: Olivier Grenie <olivier.grenie@dibcom.fr>
Date: Tue, 15 Sep 2009 06:55:35 -0300
Subject: V4L/DVB (12888): STK7770P: Add support for STK7770P

Added support for the dib7770P and the STK7770P

Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/dvb-usb/dib0700_devices.c | 76 +++++++++++++++++++++++++++++
 drivers/media/dvb/dvb-usb/dvb-usb-ids.h     |  1 +
 2 files changed, 77 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index ec0dd255c0e..dd0294e5ff5 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -1122,6 +1122,15 @@ static struct dib0070_config dib7070p_dib0070_config[2] = {
 	}
 };
 
+static struct dib0070_config dib7770p_dib0070_config = {
+	 .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
+	 .reset = dib7070_tuner_reset,
+	 .sleep = dib7070_tuner_sleep,
+	 .clock_khz = 12000,
+	 .clock_pad_drive = 0,
+	 .flip_chip = 1,
+};
+
 static int dib7070_set_param_override(struct dvb_frontend *fe, struct dvb_frontend_parameters *fep)
 {
 	struct dvb_usb_adapter *adap = fe->dvb->priv;
@@ -1139,6 +1148,45 @@ static int dib7070_set_param_override(struct dvb_frontend *fe, struct dvb_fronte
 	return state->set_param_save(fe, fep);
 }
 
+static int dib7770_set_param_override(struct dvb_frontend *fe,
+		struct dvb_frontend_parameters *fep)
+{
+	 struct dvb_usb_adapter *adap = fe->dvb->priv;
+	 struct dib0700_adapter_state *state = adap->priv;
+
+	 u16 offset;
+	 u8 band = BAND_OF_FREQUENCY(fep->frequency/1000);
+	 switch (band) {
+	 case BAND_VHF:
+		  dib7000p_set_gpio(fe, 0, 0, 1);
+		  offset = 850;
+		  break;
+	 case BAND_UHF:
+	 default:
+		  dib7000p_set_gpio(fe, 0, 0, 0);
+		  offset = 250;
+		  break;
+	 }
+	 deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe));
+	 dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe));
+	 return state->set_param_save(fe, fep);
+}
+
+static int dib7770p_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	 struct dib0700_adapter_state *st = adap->priv;
+	 struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe,
+			 DIBX000_I2C_INTERFACE_TUNER, 1);
+
+	 if (dvb_attach(dib0070_attach, adap->fe, tun_i2c,
+				 &dib7770p_dib0070_config) == NULL)
+		 return -ENODEV;
+
+	 st->set_param_save = adap->fe->ops.tuner_ops.set_params;
+	 adap->fe->ops.tuner_ops.set_params = dib7770_set_param_override;
+	 return 0;
+}
+
 static int dib7070p_tuner_attach(struct dvb_usb_adapter *adap)
 {
 	struct dib0700_adapter_state *st = adap->priv;
@@ -1504,6 +1552,7 @@ struct usb_device_id dib0700_usb_id_table[] = {
 	{ USB_DEVICE(USB_VID_PINNACLE,	USB_PID_PINNACLE_PCTV73A) },
 	{ USB_DEVICE(USB_VID_PINNACLE,	USB_PID_PINNACLE_PCTV73ESE) },
 	{ USB_DEVICE(USB_VID_PINNACLE,	USB_PID_PINNACLE_PCTV282E) },
+	{ USB_DEVICE(USB_VID_DIBCOM,	USB_PID_DIBCOM_STK7770P) },
 	{ 0 }		/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
@@ -1965,6 +2014,33 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 				{ NULL },
 			},
 		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+		.num_adapters = 1,
+		.adapter = {
+			{
+				.frontend_attach  = stk7070p_frontend_attach,
+				.tuner_attach     = dib7770p_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+
+				.size_of_priv =
+                                        sizeof(struct dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 1,
+		.devices = {
+			{   "DiBcom STK7770P reference design",
+				{ &dib0700_usb_id_table[59], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc_interval      = DEFAULT_RC_INTERVAL,
+		.rc_key_map       = dib0700_rc_keys,
+		.rc_key_map_size  = ARRAY_SIZE(dib0700_rc_keys),
+		.rc_query         = dib0700_rc_query
 	},
 };
 
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index eec5604dcdd..a77d305e30d 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -96,6 +96,7 @@
 #define USB_PID_DIBCOM_STK7070P				0x1ebc
 #define USB_PID_DIBCOM_STK7070PD			0x1ebe
 #define USB_PID_DIBCOM_ANCHOR_2135_COLD			0x2131
+#define USB_PID_DIBCOM_STK7770P			0x1e80
 #define USB_PID_DPOSH_M9206_COLD			0x9206
 #define USB_PID_DPOSH_M9206_WARM			0xa090
 #define USB_PID_UNIWILL_STK7700P			0x6003
-- 
cgit v1.2.3


From db48138f6bc4d2b613b08731ffc8b319432ebc25 Mon Sep 17 00:00:00 2001
From: Patrick Boettcher <pboettcher@kernellabs.com>
Date: Tue, 15 Sep 2009 07:16:51 -0300
Subject: V4L/DVB (12889): DIB0700: added USB IDs for a Terratec DVB-T XXS

Since there is now correct support for the DiB7770 the support for the
'Terratec Cinergy T USB XXS (HD)' can be added.

One USB-ID has been moved, another one has been added.

Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/dvb-usb/dib0700_devices.c | 12 ++++++++----
 drivers/media/dvb/dvb-usb/dvb-usb-ids.h     |  3 ++-
 2 files changed, 10 insertions(+), 5 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index dd0294e5ff5..10a89b0e518 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -1553,6 +1553,7 @@ struct usb_device_id dib0700_usb_id_table[] = {
 	{ USB_DEVICE(USB_VID_PINNACLE,	USB_PID_PINNACLE_PCTV73ESE) },
 	{ USB_DEVICE(USB_VID_PINNACLE,	USB_PID_PINNACLE_PCTV282E) },
 	{ USB_DEVICE(USB_VID_DIBCOM,	USB_PID_DIBCOM_STK7770P) },
+/* 60 */{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_CINERGY_T_XXS_2) },
 	{ 0 }		/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
@@ -1617,7 +1618,7 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 				{ NULL },
 			},
 			{   "Leadtek Winfast DTV Dongle (STK7700P based)",
-				{ &dib0700_usb_id_table[8], &dib0700_usb_id_table[34] },
+				{ &dib0700_usb_id_table[8] },
 				{ NULL },
 			},
 			{   "AVerMedia AVerTV DVB-T Express",
@@ -2025,18 +2026,21 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
 
 				.size_of_priv =
-                                        sizeof(struct dib0700_adapter_state),
+					sizeof(struct dib0700_adapter_state),
 			},
 		},
 
-		.num_device_descs = 1,
+		.num_device_descs = 2,
 		.devices = {
 			{   "DiBcom STK7770P reference design",
 				{ &dib0700_usb_id_table[59], NULL },
 				{ NULL },
 			},
+			{   "Terratec Cinergy T USB XXS (HD)",
+				{ &dib0700_usb_id_table[34], &dib0700_usb_id_table[60] },
+				{ NULL },
+			},
 		},
-
 		.rc_interval      = DEFAULT_RC_INTERVAL,
 		.rc_key_map       = dib0700_rc_keys,
 		.rc_key_map_size  = ARRAY_SIZE(dib0700_rc_keys),
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index a77d305e30d..a07959c1c06 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -96,7 +96,7 @@
 #define USB_PID_DIBCOM_STK7070P				0x1ebc
 #define USB_PID_DIBCOM_STK7070PD			0x1ebe
 #define USB_PID_DIBCOM_ANCHOR_2135_COLD			0x2131
-#define USB_PID_DIBCOM_STK7770P			0x1e80
+#define USB_PID_DIBCOM_STK7770P				0x1e80
 #define USB_PID_DPOSH_M9206_COLD			0x9206
 #define USB_PID_DPOSH_M9206_WARM			0xa090
 #define USB_PID_UNIWILL_STK7700P			0x6003
@@ -185,6 +185,7 @@
 #define USB_PID_TERRATEC_CINERGY_HT_EXPRESS		0x0060
 #define USB_PID_TERRATEC_CINERGY_T_EXPRESS		0x0062
 #define USB_PID_TERRATEC_CINERGY_T_XXS			0x0078
+#define USB_PID_TERRATEC_CINERGY_T_XXS_2		0x00ab
 #define USB_PID_TERRATEC_T3				0x10a0
 #define USB_PID_TERRATEC_T5				0x10a1
 #define USB_PID_PINNACLE_EXPRESSCARD_320CX		0x022e
-- 
cgit v1.2.3


From b6e760f3097501e60e76fbcb7a313d42da930c1f Mon Sep 17 00:00:00 2001
From: Patrick Boettcher <pboettcher@dibcom.fr>
Date: Mon, 3 Aug 2009 14:39:15 -0300
Subject: V4L/DVB (12892): DVB-API: add support for ISDB-T and ISDB-Tsb
 (version 5.1)

This patch increments the DVB-API to version 5.1 in order to reflect the addition of ISDB-T and ISDB-Tsb on Linux' DVB-API.

Changes in detail:
- added a small document to describe how to use the API to tune to an ISDB-T or ISDB-Tsb channel
- added necessary fields to dtv_frontend_cache
- added a smarter clear-cache function which resets all fields of the dtv_frontend_cache
- added a TRANSMISSION_MODE_4K to fe_transmit_mode_t

Signed-off-by: Olivier Grenie <olgrenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/dvb-core/dvb_frontend.c | 202 +++++++++++++++++++++++++++++-
 drivers/media/dvb/dvb-core/dvb_frontend.h |  14 +++
 2 files changed, 211 insertions(+), 5 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index d13ebcb0c6b..826080416c9 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -850,6 +850,49 @@ static int dvb_frontend_check_parameters(struct dvb_frontend *fe,
 	return 0;
 }
 
+static int dvb_frontend_clear_cache(struct dvb_frontend *fe)
+{
+	int i;
+
+	memset(&(fe->dtv_property_cache), 0,
+			sizeof(struct dtv_frontend_properties));
+
+	fe->dtv_property_cache.state = DTV_CLEAR;
+	fe->dtv_property_cache.delivery_system = SYS_UNDEFINED;
+	fe->dtv_property_cache.inversion = INVERSION_AUTO;
+	fe->dtv_property_cache.fec_inner = FEC_AUTO;
+	fe->dtv_property_cache.transmission_mode = TRANSMISSION_MODE_AUTO;
+	fe->dtv_property_cache.bandwidth_hz = BANDWIDTH_AUTO;
+	fe->dtv_property_cache.guard_interval = GUARD_INTERVAL_AUTO;
+	fe->dtv_property_cache.hierarchy = HIERARCHY_AUTO;
+	fe->dtv_property_cache.symbol_rate = QAM_AUTO;
+	fe->dtv_property_cache.code_rate_HP = FEC_AUTO;
+	fe->dtv_property_cache.code_rate_LP = FEC_AUTO;
+
+	fe->dtv_property_cache.isdbt_partial_reception = -1;
+	fe->dtv_property_cache.isdbt_sb_mode = -1;
+	fe->dtv_property_cache.isdbt_sb_subchannel = -1;
+	fe->dtv_property_cache.isdbt_sb_segment_idx = -1;
+	fe->dtv_property_cache.isdbt_sb_segment_count = -1;
+	fe->dtv_property_cache.isdbt_layer_enabled = 0x7;
+	for (i = 0; i < 3; i++) {
+		fe->dtv_property_cache.layer[i].fec = FEC_AUTO;
+		fe->dtv_property_cache.layer[i].modulation = QAM_AUTO;
+		fe->dtv_property_cache.layer[i].interleaving = -1;
+		fe->dtv_property_cache.layer[i].segment_count = -1;
+	}
+
+	return 0;
+}
+
+#define _DTV_CMD(n, s, b) \
+[n] = { \
+	.name = #n, \
+	.cmd  = n, \
+	.set  = s,\
+	.buffer = b \
+}
+
 static struct dtv_cmds_h dtv_cmds[] = {
 	[DTV_TUNE] = {
 		.name	= "DTV_TUNE",
@@ -949,6 +992,43 @@ static struct dtv_cmds_h dtv_cmds[] = {
 		.cmd	= DTV_TRANSMISSION_MODE,
 		.set	= 1,
 	},
+
+	_DTV_CMD(DTV_ISDBT_PARTIAL_RECEPTION, 1, 0),
+	_DTV_CMD(DTV_ISDBT_SOUND_BROADCASTING, 1, 0),
+	_DTV_CMD(DTV_ISDBT_SB_SUBCHANNEL_ID, 1, 0),
+	_DTV_CMD(DTV_ISDBT_SB_SEGMENT_IDX, 1, 0),
+	_DTV_CMD(DTV_ISDBT_SB_SEGMENT_COUNT, 1, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERA_FEC, 1, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERA_MODULATION, 1, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERA_SEGMENT_COUNT, 1, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERA_TIME_INTERLEAVING, 1, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERB_FEC, 1, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERB_MODULATION, 1, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERB_SEGMENT_COUNT, 1, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERB_TIME_INTERLEAVING, 1, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERC_FEC, 1, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERC_MODULATION, 1, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERC_SEGMENT_COUNT, 1, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERC_TIME_INTERLEAVING, 1, 0),
+
+	_DTV_CMD(DTV_ISDBT_PARTIAL_RECEPTION, 0, 0),
+	_DTV_CMD(DTV_ISDBT_SOUND_BROADCASTING, 0, 0),
+	_DTV_CMD(DTV_ISDBT_SB_SUBCHANNEL_ID, 0, 0),
+	_DTV_CMD(DTV_ISDBT_SB_SEGMENT_IDX, 0, 0),
+	_DTV_CMD(DTV_ISDBT_SB_SEGMENT_COUNT, 0, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERA_FEC, 0, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERA_MODULATION, 0, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERA_SEGMENT_COUNT, 0, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERA_TIME_INTERLEAVING, 0, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERB_FEC, 0, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERB_MODULATION, 0, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERB_SEGMENT_COUNT, 0, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERB_TIME_INTERLEAVING, 0, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERC_FEC, 0, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERC_MODULATION, 0, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERC_SEGMENT_COUNT, 0, 0),
+	_DTV_CMD(DTV_ISDBT_LAYERC_TIME_INTERLEAVING, 0, 0),
+
 	/* Get */
 	[DTV_DISEQC_SLAVE_REPLY] = {
 		.name	= "DTV_DISEQC_SLAVE_REPLY",
@@ -956,6 +1036,7 @@ static struct dtv_cmds_h dtv_cmds[] = {
 		.set	= 0,
 		.buffer	= 1,
 	},
+
 	[DTV_API_VERSION] = {
 		.name	= "DTV_API_VERSION",
 		.cmd	= DTV_API_VERSION,
@@ -1165,14 +1246,21 @@ static void dtv_property_adv_params_sync(struct dvb_frontend *fe)
 	if(c->delivery_system == SYS_ISDBT) {
 		/* Fake out a generic DVB-T request so we pass validation in the ioctl */
 		p->frequency = c->frequency;
-		p->inversion = INVERSION_AUTO;
+		p->inversion = c->inversion;
 		p->u.ofdm.constellation = QAM_AUTO;
 		p->u.ofdm.code_rate_HP = FEC_AUTO;
 		p->u.ofdm.code_rate_LP = FEC_AUTO;
-		p->u.ofdm.bandwidth = BANDWIDTH_AUTO;
 		p->u.ofdm.transmission_mode = TRANSMISSION_MODE_AUTO;
 		p->u.ofdm.guard_interval = GUARD_INTERVAL_AUTO;
 		p->u.ofdm.hierarchy_information = HIERARCHY_AUTO;
+		if (c->bandwidth_hz == 8000000)
+			p->u.ofdm.bandwidth = BANDWIDTH_8_MHZ;
+		else if (c->bandwidth_hz == 7000000)
+			p->u.ofdm.bandwidth = BANDWIDTH_7_MHZ;
+		else if (c->bandwidth_hz == 6000000)
+			p->u.ofdm.bandwidth = BANDWIDTH_6_MHZ;
+		else
+			p->u.ofdm.bandwidth = BANDWIDTH_AUTO;
 	}
 }
 
@@ -1274,6 +1362,59 @@ static int dtv_property_process_get(struct dvb_frontend *fe,
 	case DTV_HIERARCHY:
 		tvp->u.data = fe->dtv_property_cache.hierarchy;
 		break;
+
+	/* ISDB-T Support here */
+	case DTV_ISDBT_PARTIAL_RECEPTION:
+		tvp->u.data = fe->dtv_property_cache.isdbt_partial_reception;
+		break;
+	case DTV_ISDBT_SOUND_BROADCASTING:
+		tvp->u.data = fe->dtv_property_cache.isdbt_sb_mode;
+		break;
+	case DTV_ISDBT_SB_SUBCHANNEL_ID:
+		tvp->u.data = fe->dtv_property_cache.isdbt_sb_subchannel;
+		break;
+	case DTV_ISDBT_SB_SEGMENT_IDX:
+		tvp->u.data = fe->dtv_property_cache.isdbt_sb_segment_idx;
+		break;
+	case DTV_ISDBT_SB_SEGMENT_COUNT:
+		tvp->u.data = fe->dtv_property_cache.isdbt_sb_segment_count;
+		break;
+	case DTV_ISDBT_LAYERA_FEC:
+		tvp->u.data = fe->dtv_property_cache.layer[0].fec;
+		break;
+	case DTV_ISDBT_LAYERA_MODULATION:
+		tvp->u.data = fe->dtv_property_cache.layer[0].modulation;
+		break;
+	case DTV_ISDBT_LAYERA_SEGMENT_COUNT:
+		tvp->u.data = fe->dtv_property_cache.layer[0].segment_count;
+		break;
+	case DTV_ISDBT_LAYERA_TIME_INTERLEAVING:
+		tvp->u.data = fe->dtv_property_cache.layer[0].interleaving;
+		break;
+	case DTV_ISDBT_LAYERB_FEC:
+		tvp->u.data = fe->dtv_property_cache.layer[1].fec;
+		break;
+	case DTV_ISDBT_LAYERB_MODULATION:
+		tvp->u.data = fe->dtv_property_cache.layer[1].modulation;
+		break;
+	case DTV_ISDBT_LAYERB_SEGMENT_COUNT:
+		tvp->u.data = fe->dtv_property_cache.layer[1].segment_count;
+		break;
+	case DTV_ISDBT_LAYERB_TIME_INTERLEAVING:
+		tvp->u.data = fe->dtv_property_cache.layer[1].interleaving;
+		break;
+	case DTV_ISDBT_LAYERC_FEC:
+		tvp->u.data = fe->dtv_property_cache.layer[2].fec;
+		break;
+	case DTV_ISDBT_LAYERC_MODULATION:
+		tvp->u.data = fe->dtv_property_cache.layer[2].modulation;
+		break;
+	case DTV_ISDBT_LAYERC_SEGMENT_COUNT:
+		tvp->u.data = fe->dtv_property_cache.layer[2].segment_count;
+		break;
+	case DTV_ISDBT_LAYERC_TIME_INTERLEAVING:
+		tvp->u.data = fe->dtv_property_cache.layer[2].interleaving;
+		break;
 	default:
 		r = -1;
 	}
@@ -1302,10 +1443,8 @@ static int dtv_property_process_set(struct dvb_frontend *fe,
 		/* Reset a cache of data specific to the frontend here. This does
 		 * not effect hardware.
 		 */
+		dvb_frontend_clear_cache(fe);
 		dprintk("%s() Flushing property cache\n", __func__);
-		memset(&fe->dtv_property_cache, 0, sizeof(struct dtv_frontend_properties));
-		fe->dtv_property_cache.state = tvp->cmd;
-		fe->dtv_property_cache.delivery_system = SYS_UNDEFINED;
 		break;
 	case DTV_TUNE:
 		/* interpret the cache of data, build either a traditional frontend
@@ -1371,6 +1510,59 @@ static int dtv_property_process_set(struct dvb_frontend *fe,
 	case DTV_HIERARCHY:
 		fe->dtv_property_cache.hierarchy = tvp->u.data;
 		break;
+
+	/* ISDB-T Support here */
+	case DTV_ISDBT_PARTIAL_RECEPTION:
+		fe->dtv_property_cache.isdbt_partial_reception = tvp->u.data;
+		break;
+	case DTV_ISDBT_SOUND_BROADCASTING:
+		fe->dtv_property_cache.isdbt_sb_mode = tvp->u.data;
+		break;
+	case DTV_ISDBT_SB_SUBCHANNEL_ID:
+		fe->dtv_property_cache.isdbt_sb_subchannel = tvp->u.data;
+		break;
+	case DTV_ISDBT_SB_SEGMENT_IDX:
+		fe->dtv_property_cache.isdbt_sb_segment_idx = tvp->u.data;
+		break;
+	case DTV_ISDBT_SB_SEGMENT_COUNT:
+		fe->dtv_property_cache.isdbt_sb_segment_count = tvp->u.data;
+		break;
+	case DTV_ISDBT_LAYERA_FEC:
+		fe->dtv_property_cache.layer[0].fec = tvp->u.data;
+		break;
+	case DTV_ISDBT_LAYERA_MODULATION:
+		fe->dtv_property_cache.layer[0].modulation = tvp->u.data;
+		break;
+	case DTV_ISDBT_LAYERA_SEGMENT_COUNT:
+		fe->dtv_property_cache.layer[0].segment_count = tvp->u.data;
+		break;
+	case DTV_ISDBT_LAYERA_TIME_INTERLEAVING:
+		fe->dtv_property_cache.layer[0].interleaving = tvp->u.data;
+		break;
+	case DTV_ISDBT_LAYERB_FEC:
+		fe->dtv_property_cache.layer[1].fec = tvp->u.data;
+		break;
+	case DTV_ISDBT_LAYERB_MODULATION:
+		fe->dtv_property_cache.layer[1].modulation = tvp->u.data;
+		break;
+	case DTV_ISDBT_LAYERB_SEGMENT_COUNT:
+		fe->dtv_property_cache.layer[1].segment_count = tvp->u.data;
+		break;
+	case DTV_ISDBT_LAYERB_TIME_INTERLEAVING:
+		fe->dtv_property_cache.layer[1].interleaving = tvp->u.data;
+		break;
+	case DTV_ISDBT_LAYERC_FEC:
+		fe->dtv_property_cache.layer[2].fec = tvp->u.data;
+		break;
+	case DTV_ISDBT_LAYERC_MODULATION:
+		fe->dtv_property_cache.layer[2].modulation = tvp->u.data;
+		break;
+	case DTV_ISDBT_LAYERC_SEGMENT_COUNT:
+		fe->dtv_property_cache.layer[2].segment_count = tvp->u.data;
+		break;
+	case DTV_ISDBT_LAYERC_TIME_INTERLEAVING:
+		fe->dtv_property_cache.layer[2].interleaving = tvp->u.data;
+		break;
 	default:
 		r = -1;
 	}
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h b/drivers/media/dvb/dvb-core/dvb_frontend.h
index e176da472d7..9e46f1772c5 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.h
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.h
@@ -341,6 +341,20 @@ struct dtv_frontend_properties {
 	fe_rolloff_t		rolloff;
 
 	fe_delivery_system_t	delivery_system;
+
+	/* ISDB-T specifics */
+	u8			isdbt_partial_reception;
+	u8			isdbt_sb_mode;
+	u8			isdbt_sb_subchannel;
+	u32			isdbt_sb_segment_idx;
+	u32			isdbt_sb_segment_count;
+	u8			isdbt_layer_enabled;
+	struct {
+	    u8			segment_count;
+	    fe_code_rate_t	fec;
+	    fe_modulation_t	modulation;
+	    u8			interleaving;
+	} layer[3];
 };
 
 struct dvb_frontend {
-- 
cgit v1.2.3


From e7b7949a95441affe937fa25f4d6d8f3df0ca271 Mon Sep 17 00:00:00 2001
From: Patrick Boettcher <pboettcher@dibcom.fr>
Date: Fri, 14 Aug 2009 05:24:19 -0300
Subject: V4L/DVB (12896): ISDB-T: add mapping of LAYER_ENABLED to
 frontend-cache

It was forgotten to map the LAYER_ENABLED ioctl to the frontend-cache and back.

Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/dvb-core/dvb_frontend.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index 826080416c9..3c9482660ea 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -998,6 +998,7 @@ static struct dtv_cmds_h dtv_cmds[] = {
 	_DTV_CMD(DTV_ISDBT_SB_SUBCHANNEL_ID, 1, 0),
 	_DTV_CMD(DTV_ISDBT_SB_SEGMENT_IDX, 1, 0),
 	_DTV_CMD(DTV_ISDBT_SB_SEGMENT_COUNT, 1, 0),
+	_DTV_CMD(DTV_ISDBT_LAYER_ENABLED, 1, 0),
 	_DTV_CMD(DTV_ISDBT_LAYERA_FEC, 1, 0),
 	_DTV_CMD(DTV_ISDBT_LAYERA_MODULATION, 1, 0),
 	_DTV_CMD(DTV_ISDBT_LAYERA_SEGMENT_COUNT, 1, 0),
@@ -1016,6 +1017,7 @@ static struct dtv_cmds_h dtv_cmds[] = {
 	_DTV_CMD(DTV_ISDBT_SB_SUBCHANNEL_ID, 0, 0),
 	_DTV_CMD(DTV_ISDBT_SB_SEGMENT_IDX, 0, 0),
 	_DTV_CMD(DTV_ISDBT_SB_SEGMENT_COUNT, 0, 0),
+	_DTV_CMD(DTV_ISDBT_LAYER_ENABLED, 0, 0),
 	_DTV_CMD(DTV_ISDBT_LAYERA_FEC, 0, 0),
 	_DTV_CMD(DTV_ISDBT_LAYERA_MODULATION, 0, 0),
 	_DTV_CMD(DTV_ISDBT_LAYERA_SEGMENT_COUNT, 0, 0),
@@ -1379,6 +1381,9 @@ static int dtv_property_process_get(struct dvb_frontend *fe,
 	case DTV_ISDBT_SB_SEGMENT_COUNT:
 		tvp->u.data = fe->dtv_property_cache.isdbt_sb_segment_count;
 		break;
+	case DTV_ISDBT_LAYER_ENABLED:
+		tvp->u.data = fe->dtv_property_cache.isdbt_layer_enabled;
+		break;
 	case DTV_ISDBT_LAYERA_FEC:
 		tvp->u.data = fe->dtv_property_cache.layer[0].fec;
 		break;
@@ -1527,6 +1532,9 @@ static int dtv_property_process_set(struct dvb_frontend *fe,
 	case DTV_ISDBT_SB_SEGMENT_COUNT:
 		fe->dtv_property_cache.isdbt_sb_segment_count = tvp->u.data;
 		break;
+	case DTV_ISDBT_LAYER_ENABLED:
+		fe->dtv_property_cache.isdbt_layer_enabled = tvp->u.data;
+		break;
 	case DTV_ISDBT_LAYERA_FEC:
 		fe->dtv_property_cache.layer[0].fec = tvp->u.data;
 		break;
-- 
cgit v1.2.3


From 7e5ce6515d0deb76a49dcb4112a6dff5d950bfb6 Mon Sep 17 00:00:00 2001
From: Patrick Boettcher <Patrick.Boettcher@dibcom.fr>
Date: Mon, 3 Aug 2009 13:43:40 -0300
Subject: V4L/DVB (12898): DiB0070: Update to latest internal release

General update of the dib0070-driver based on DiBcom's latest release.

New driver features can enable better performance in some reception situations.

Signed-off-by: Patrick Boettcher <Patrick.Boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/dvb-usb/dib0700_devices.c |   7 +-
 drivers/media/dvb/frontends/dib0070.c       | 673 ++++++++++++++++------------
 drivers/media/dvb/frontends/dib0070.h       |  11 +
 3 files changed, 407 insertions(+), 284 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index 10a89b0e518..10ade261b0a 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -1098,11 +1098,13 @@ static struct dibx000_agc_config dib7070_agc_config = {
 
 static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff)
 {
+	deb_info("reset: %d", onoff);
 	return dib7000p_set_gpio(fe, 8, 0, !onoff);
 }
 
 static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff)
 {
+	deb_info("sleep: %d", onoff);
 	return dib7000p_set_gpio(fe, 9, 0, onoff);
 }
 
@@ -1112,13 +1114,14 @@ static struct dib0070_config dib7070p_dib0070_config[2] = {
 		.reset = dib7070_tuner_reset,
 		.sleep = dib7070_tuner_sleep,
 		.clock_khz = 12000,
-		.clock_pad_drive = 4
+		.clock_pad_drive = 4,
+		.charge_pump = 2,
 	}, {
 		.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
 		.reset = dib7070_tuner_reset,
 		.sleep = dib7070_tuner_sleep,
 		.clock_khz = 12000,
-
+		.charge_pump = 2,
 	}
 };
 
diff --git a/drivers/media/dvb/frontends/dib0070.c b/drivers/media/dvb/frontends/dib0070.c
index da92cbe1b8e..2eb9bdb4dbb 100644
--- a/drivers/media/dvb/frontends/dib0070.c
+++ b/drivers/media/dvb/frontends/dib0070.c
@@ -1,12 +1,29 @@
 /*
  * Linux-DVB Driver for DiBcom's DiB0070 base-band RF Tuner.
  *
- * Copyright (C) 2005-7 DiBcom (http://www.dibcom.fr/)
+ * Copyright (C) 2005-9 DiBcom (http://www.dibcom.fr/)
  *
  * This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License as
- *	published by the Free Software Foundation, version 2.
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ * This code is more or less generated from another driver, please
+ * excuse some codingstyle oddities.
+ *
  */
+
 #include <linux/kernel.h>
 #include <linux/i2c.h>
 
@@ -19,19 +36,57 @@ static int debug;
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
 
-#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB0070: "); printk(args); printk("\n"); } } while (0)
+#define dprintk(args...) do { \
+	if (debug) { \
+		printk(KERN_DEBUG "DiB0070: "); \
+		printk(args); \
+		printk("\n"); \
+	} \
+} while (0)
 
 #define DIB0070_P1D  0x00
 #define DIB0070_P1F  0x01
 #define DIB0070_P1G  0x03
 #define DIB0070S_P1A 0x02
 
+enum frontend_tune_state {
+    CT_TUNER_START = 10,
+    CT_TUNER_STEP_0,
+    CT_TUNER_STEP_1,
+    CT_TUNER_STEP_2,
+    CT_TUNER_STEP_3,
+    CT_TUNER_STEP_4,
+    CT_TUNER_STEP_5,
+    CT_TUNER_STEP_6,
+    CT_TUNER_STEP_7,
+    CT_TUNER_STOP,
+};
+
+#define FE_CALLBACK_TIME_NEVER 0xffffffff
+
 struct dib0070_state {
 	struct i2c_adapter *i2c;
 	struct dvb_frontend *fe;
 	const struct dib0070_config *cfg;
 	u16 wbd_ff_offset;
 	u8 revision;
+
+    enum frontend_tune_state tune_state;
+    u32 current_rf;
+
+    /* for the captrim binary search */
+	s8 step;
+	u16 adc_diff;
+
+	s8 captrim;
+	s8 fcaptrim;
+	u16 lo4;
+
+	const struct dib0070_tuning *current_tune_table_index;
+	const struct dib0070_lna_match *lna_match;
+
+    u8  wbd_gain_current;
+	u16 wbd_offset_3_3[2];
 };
 
 static uint16_t dib0070_read_reg(struct dib0070_state *state, u8 reg)
@@ -59,55 +114,71 @@ static int dib0070_write_reg(struct dib0070_state *state, u8 reg, u16 val)
 	return 0;
 }
 
-#define HARD_RESET(state) do { if (state->cfg->reset) { state->cfg->reset(state->fe,1); msleep(10); state->cfg->reset(state->fe,0); msleep(10); } } while (0)
+#define HARD_RESET(state) do { \
+    state->cfg->sleep(state->fe, 0); \
+    if (state->cfg->reset) { \
+	state->cfg->reset(state->fe,1); msleep(10); \
+	state->cfg->reset(state->fe,0); msleep(10); \
+    } \
+} while (0)
 
 static int dib0070_set_bandwidth(struct dvb_frontend *fe, struct dvb_frontend_parameters *ch)
 {
-	struct dib0070_state *st = fe->tuner_priv;
-	u16 tmp = 0;
-	tmp = dib0070_read_reg(st, 0x02) & 0x3fff;
-
-    switch(BANDWIDTH_TO_KHZ(ch->u.ofdm.bandwidth)) {
-		case  8000:
-			tmp |= (0 << 14);
-			break;
-		case  7000:
-			tmp |= (1 << 14);
-			break;
-	case  6000:
-			tmp |= (2 << 14);
-			break;
-	case 5000:
-		default:
-			tmp |= (3 << 14);
-			break;
-	}
-	dib0070_write_reg(st, 0x02, tmp);
+    struct dib0070_state *st = fe->tuner_priv;
+    u16 tmp = dib0070_read_reg(st, 0x02) & 0x3fff;
+
+    if (fe->dtv_property_cache.bandwidth_hz/1000 > 7000)
+	tmp |= (0 << 14);
+    else if (fe->dtv_property_cache.bandwidth_hz/1000 > 6000)
+	tmp |= (1 << 14);
+    else if (fe->dtv_property_cache.bandwidth_hz/1000 > 5000)
+	tmp |= (2 << 14);
+    else
+	tmp |= (3 << 14);
+
+    dib0070_write_reg(st, 0x02, tmp);
+
+    /* sharpen the BB filter in ISDB-T to have higher immunity to adjacent channels */
+    if (fe->dtv_property_cache.delivery_system == SYS_ISDBT) {
+	u16 value = dib0070_read_reg(st, 0x17);
+
+	dib0070_write_reg(st, 0x17, value & 0xfffc);
+	tmp = dib0070_read_reg(st, 0x01) & 0x01ff;
+	dib0070_write_reg(st, 0x01, tmp | (60 << 9));
+
+	dib0070_write_reg(st, 0x17, value);
+    }
 	return 0;
 }
 
-static void dib0070_captrim(struct dib0070_state *st, u16 LO4)
+static int dib0070_captrim(struct dib0070_state *st, enum frontend_tune_state *tune_state)
 {
-	int8_t captrim, fcaptrim, step_sign, step;
-	u16 adc, adc_diff = 3000;
+	int8_t step_sign;
+	u16 adc;
+	int ret = 0;
 
+	if (*tune_state == CT_TUNER_STEP_0) {
 
+		dib0070_write_reg(st, 0x0f, 0xed10);
+		dib0070_write_reg(st, 0x17,    0x0034);
 
-	dib0070_write_reg(st, 0x0f, 0xed10);
-	dib0070_write_reg(st, 0x17,    0x0034);
+		dib0070_write_reg(st, 0x18, 0x0032);
+		st->step = st->captrim = st->fcaptrim = 64;
+		st->adc_diff = 3000;
+		ret = 20;
 
-	dib0070_write_reg(st, 0x18, 0x0032);
-	msleep(2);
+	*tune_state = CT_TUNER_STEP_1;
+	} else if (*tune_state == CT_TUNER_STEP_1) {
+		st->step /= 2;
+		dib0070_write_reg(st, 0x14, st->lo4 | st->captrim);
+		ret = 15;
 
-	step = captrim = fcaptrim = 64;
+		*tune_state = CT_TUNER_STEP_2;
+	} else if (*tune_state == CT_TUNER_STEP_2) {
 
-	do {
-		step /= 2;
-		dib0070_write_reg(st, 0x14, LO4 | captrim);
-		msleep(1);
 		adc = dib0070_read_reg(st, 0x19);
 
-		dprintk( "CAPTRIM=%hd; ADC = %hd (ADC) & %dmV", captrim, adc, (u32) adc*(u32)1800/(u32)1024);
+		dprintk( "CAPTRIM=%hd; ADC = %hd (ADC) & %dmV", st->captrim, adc, (u32) adc*(u32)1800/(u32)1024);
 
 		if (adc >= 400) {
 			adc -= 400;
@@ -117,266 +188,305 @@ static void dib0070_captrim(struct dib0070_state *st, u16 LO4)
 			step_sign = 1;
 		}
 
-		if (adc < adc_diff) {
-			dprintk( "CAPTRIM=%hd is closer to target (%hd/%hd)", captrim, adc, adc_diff);
-			adc_diff = adc;
-			fcaptrim = captrim;
+		if (adc < st->adc_diff) {
+			dprintk( "CAPTRIM=%hd is closer to target (%hd/%hd)", st->captrim, adc, st->adc_diff);
+			st->adc_diff = adc;
+			st->fcaptrim = st->captrim;
 
 
 
 		}
-		captrim += (step_sign * step);
-	} while (step >= 1);
+		st->captrim += (step_sign * st->step);
+
+		if (st->step >= 1)
+			*tune_state = CT_TUNER_STEP_1;
+		else
+			*tune_state = CT_TUNER_STEP_3;
+
+	} else if (*tune_state == CT_TUNER_STEP_3) {
+		dib0070_write_reg(st, 0x14, st->lo4 | st->fcaptrim);
+		dib0070_write_reg(st, 0x18, 0x07ff);
+		*tune_state = CT_TUNER_STEP_4;
+	}
 
-	dib0070_write_reg(st, 0x14, LO4 | fcaptrim);
-	dib0070_write_reg(st, 0x18, 0x07ff);
+	return ret;
 }
 
-#define LPF	100                       // define for the loop filter 100kHz by default 16-07-06
-#define LO4_SET_VCO_HFDIV(l, v, h)   l |= ((v) << 11) | ((h) << 7)
-#define LO4_SET_SD(l, s)             l |= ((s) << 14) | ((s) << 12)
-#define LO4_SET_CTRIM(l, c)          l |=  (c) << 10
-static int dib0070_tune_digital(struct dvb_frontend *fe, struct dvb_frontend_parameters *ch)
+static int dib0070_set_ctrl_lo5(struct dvb_frontend *fe, u8 vco_bias_trim, u8 hf_div_trim, u8 cp_current, u8 third_order_filt)
 {
-	struct dib0070_state *st = fe->tuner_priv;
-	u32 freq = ch->frequency/1000 + (BAND_OF_FREQUENCY(ch->frequency/1000) == BAND_VHF ? st->cfg->freq_offset_khz_vhf : st->cfg->freq_offset_khz_uhf);
+	struct dib0070_state *state = fe->tuner_priv;
+    u16 lo5 = (third_order_filt << 14) | (0 << 13) | (1 << 12) | (3 << 9) | (cp_current << 6) | (hf_div_trim << 3) | (vco_bias_trim << 0);
+	dprintk( "CTRL_LO5: 0x%x", lo5);
+	return dib0070_write_reg(state, 0x15, lo5);
+}
 
-	u8 band = BAND_OF_FREQUENCY(freq), c;
+struct dib0070_tuning
+{
+    u32 max_freq; /* for every frequency less than or equal to that field: this information is correct */
+    u8 switch_trim;
+    u8 vco_band;
+    u8 hfdiv;
+    u8 vco_multi;
+    u8 presc;
+    u8 wbdmux;
+    u16 tuner_enable;
+};
 
-	/*******************VCO***********************************/
-	u16 lo4 = 0;
+struct dib0070_lna_match
+{
+    u32 max_freq; /* for every frequency less than or equal to that field: this information is correct */
+    u8 lna_band;
+};
 
-	u8 REFDIV, PRESC = 2;
-	u32 FBDiv, Rest, FREF, VCOF_kHz;
-	u16 Num, Den;
-	/*******************FrontEnd******************************/
-	u16 value = 0;
+static const struct dib0070_tuning dib0070s_tuning_table[] =
 
-	dprintk( "Tuning for Band: %hd (%d kHz)", band, freq);
+{
+    {     570000, 2, 1, 3, 6, 6, 2, 0x4000 | 0x0800 }, /* UHF */
+    {     700000, 2, 0, 2, 4, 2, 2, 0x4000 | 0x0800 },
+    {     863999, 2, 1, 2, 4, 2, 2, 0x4000 | 0x0800 },
+    {    1500000, 0, 1, 1, 2, 2, 4, 0x2000 | 0x0400 }, /* LBAND */
+    {    1600000, 0, 1, 1, 2, 2, 4, 0x2000 | 0x0400 },
+    {    2000000, 0, 1, 1, 2, 2, 4, 0x2000 | 0x0400 },
+    { 0xffffffff, 0, 0, 8, 1, 2, 1, 0x8000 | 0x1000 }, /* SBAND */
+};
 
+static const struct dib0070_tuning dib0070_tuning_table[] =
 
-	dib0070_write_reg(st, 0x17, 0x30);
+{
+    {     115000, 1, 0, 7, 24, 2, 1, 0x8000 | 0x1000 }, /* FM below 92MHz cannot be tuned */
+    {     179500, 1, 0, 3, 16, 2, 1, 0x8000 | 0x1000 }, /* VHF */
+    {     189999, 1, 1, 3, 16, 2, 1, 0x8000 | 0x1000 },
+    {     250000, 1, 0, 6, 12, 2, 1, 0x8000 | 0x1000 },
+    {     569999, 2, 1, 5,  6, 2, 2, 0x4000 | 0x0800 }, /* UHF */
+    {     699999, 2, 0 ,1,  4, 2, 2, 0x4000 | 0x0800 },
+    {     863999, 2, 1, 1,  4, 2, 2, 0x4000 | 0x0800 },
+    { 0xffffffff, 0, 1, 0,  2, 2, 4, 0x2000 | 0x0400 }, /* LBAND or everything higher than UHF */
+};
 
-	dib0070_set_bandwidth(fe, ch);	/* c is used as HF */
-	switch (st->revision) {
-		case DIB0070S_P1A:
-			switch (band) {
-				case BAND_LBAND:
-					LO4_SET_VCO_HFDIV(lo4, 1, 1);
-					c = 2;
-					break;
-				case BAND_SBAND:
-					LO4_SET_VCO_HFDIV(lo4, 0, 0);
-					LO4_SET_CTRIM(lo4, 1);
-					c = 1;
-					break;
-				case BAND_UHF:
-				default:
-					if (freq < 570000) {
-						LO4_SET_VCO_HFDIV(lo4, 1, 3);
-						PRESC = 6; c = 6;
-					} else if (freq < 680000) {
-						LO4_SET_VCO_HFDIV(lo4, 0, 2);
-						c = 4;
-					} else {
-						LO4_SET_VCO_HFDIV(lo4, 1, 2);
-						c = 4;
-					}
-					break;
-			} break;
-
-		case DIB0070_P1G:
-		case DIB0070_P1F:
-		default:
-			switch (band) {
-				case BAND_FM:
-						LO4_SET_VCO_HFDIV(lo4, 0, 7);
-						c = 24;
-					break;
-				case BAND_LBAND:
-						LO4_SET_VCO_HFDIV(lo4, 1, 0);
-						c = 2;
-					break;
-				case BAND_VHF:
-					if (freq < 180000) {
-						LO4_SET_VCO_HFDIV(lo4, 0, 3);
-						c = 16;
-					} else if (freq < 190000) {
-						LO4_SET_VCO_HFDIV(lo4, 1, 3);
-						c = 16;
-					} else {
-						LO4_SET_VCO_HFDIV(lo4, 0, 6);
-						c = 12;
-					}
-					break;
-
-				case BAND_UHF:
-				default:
-					if (freq < 570000) {
-						LO4_SET_VCO_HFDIV(lo4, 1, 5);
-						c = 6;
-					} else if (freq < 700000) {
-						LO4_SET_VCO_HFDIV(lo4, 0, 1);
-						c = 4;
-					} else {
-						LO4_SET_VCO_HFDIV(lo4, 1, 1);
-						c = 4;
-					}
-					break;
-			}
-		break;
-	}
+static const struct dib0070_lna_match dib0070_lna_flip_chip[] =
 
-	dprintk( "HFDIV code: %hd", (lo4 >> 7) & 0xf);
-	dprintk( "VCO = %hd", (lo4 >> 11) & 0x3);
+{
+    {     180000, 0 }, /* VHF */
+    {     188000, 1 },
+    {     196400, 2 },
+    {     250000, 3 },
+    {     550000, 0 }, /* UHF */
+    {     590000, 1 },
+    {     666000, 3 },
+    {     864000, 5 },
+    {    1500000, 0 }, /* LBAND or everything higher than UHF */
+    {    1600000, 1 },
+    {    2000000, 3 },
+    { 0xffffffff, 7 },
+};
 
+static const struct dib0070_lna_match dib0070_lna[] =
 
-	VCOF_kHz = (c * freq) * 2;
-	dprintk( "VCOF in kHz: %d ((%hd*%d) << 1))",VCOF_kHz, c, freq);
+{
+    {     180000, 0 }, /* VHF */
+    {     188000, 1 },
+    {     196400, 2 },
+    {     250000, 3 },
+    {     550000, 2 }, /* UHF */
+    {     650000, 3 },
+    {     750000, 5 },
+    {     850000, 6 },
+    {     864000, 7 },
+    {    1500000, 0 }, /* LBAND or everything higher than UHF */
+    {    1600000, 1 },
+    {    2000000, 3 },
+    { 0xffffffff, 7 },
+};
 
-	switch (band) {
-		case BAND_VHF:
-			REFDIV = (u8) ((st->cfg->clock_khz + 9999) / 10000);
-			break;
-		case BAND_FM:
-			REFDIV = (u8) ((st->cfg->clock_khz) / 1000);
-			break;
-		default:
-			REFDIV = (u8) ( st->cfg->clock_khz  / 10000);
-			break;
-	}
-	FREF = st->cfg->clock_khz / REFDIV;
+#define LPF	100                       // define for the loop filter 100kHz by default 16-07-06
+static int dib0070_tune_digital(struct dvb_frontend *fe, struct dvb_frontend_parameters *ch)
+{
+    struct dib0070_state *st = fe->tuner_priv;
+
+    const struct dib0070_tuning *tune;
+    const struct dib0070_lna_match *lna_match;
+
+    enum frontend_tune_state *tune_state = &st->tune_state;
+    int ret = 10; /* 1ms is the default delay most of the time */
 
-	dprintk( "REFDIV: %hd, FREF: %d", REFDIV, FREF);
+    u8  band = (u8)BAND_OF_FREQUENCY(ch->frequency/1000);
+    u32 freq = ch->frequency/1000 + (band == BAND_VHF ? st->cfg->freq_offset_khz_vhf : st->cfg->freq_offset_khz_uhf);
 
 
 
+
+
+#ifdef CONFIG_STANDARD_ISDBT
+    if (fe->dtv_property_cache.delivery_system == SYS_ISDBT && ch->u.isdbt.sb_mode == 1)
+	if ( ( (ch->u.isdbt.sb_conn_total_seg % 2)       && (ch->u.isdbt.sb_wanted_seg == ((ch->u.isdbt.sb_conn_total_seg/2) + 1) ) ) ||
+	   ( ( (ch->u.isdbt.sb_conn_total_seg % 2) == 0) && (ch->u.isdbt.sb_wanted_seg ==  (ch->u.isdbt.sb_conn_total_seg/2)      ) ) ||
+	   ( ( (ch->u.isdbt.sb_conn_total_seg % 2) == 0) && (ch->u.isdbt.sb_wanted_seg == ((ch->u.isdbt.sb_conn_total_seg/2)+1))) )
+	    freq += 850;
+#endif
+    if (st->current_rf != freq) {
+
 	switch (st->revision) {
-		case DIB0070S_P1A:
-			FBDiv = (VCOF_kHz / PRESC / FREF);
-			Rest  = (VCOF_kHz / PRESC) - FBDiv * FREF;
-			break;
-
-		case DIB0070_P1G:
-		case DIB0070_P1F:
-		default:
-			FBDiv = (freq / (FREF / 2));
-			Rest  = 2 * freq - FBDiv * FREF;
-			break;
+	case DIB0070S_P1A:
+	    tune = dib0070s_tuning_table;
+	    lna_match = dib0070_lna;
+	    break;
+	default:
+	    tune = dib0070_tuning_table;
+	    if (st->cfg->flip_chip)
+		lna_match = dib0070_lna_flip_chip;
+	    else
+		lna_match = dib0070_lna;
+	    break;
 	}
+	while (freq > tune->max_freq) /* find the right one */
+	    tune++;
+	while (freq > lna_match->max_freq) /* find the right one */
+	    lna_match++;
 
+	st->current_tune_table_index = tune;
+	st->lna_match = lna_match;
+    }
 
-	     if (Rest < LPF)              Rest = 0;
-	else if (Rest < 2 * LPF)          Rest = 2 * LPF;
-	else if (Rest > (FREF - LPF))   { Rest = 0 ; FBDiv += 1; }
-	else if (Rest > (FREF - 2 * LPF)) Rest = FREF - 2 * LPF;
-	Rest = (Rest * 6528) / (FREF / 10);
-	dprintk( "FBDIV: %d, Rest: %d", FBDiv, Rest);
+    if (*tune_state == CT_TUNER_START) {
+	dprintk( "Tuning for Band: %hd (%d kHz)", band, freq);
+	if (st->current_rf != freq) {
+	    u8 REFDIV;
+	    u32 FBDiv, Rest, FREF, VCOF_kHz;
+	    u8 Den;
 
-	Num = 0;
-	Den = 1;
+	    st->current_rf = freq;
+	    st->lo4 = (st->current_tune_table_index->vco_band << 11) | (st->current_tune_table_index->hfdiv << 7);
 
-	if (Rest > 0) {
-		LO4_SET_SD(lo4, 1);
-		Den = 255;
-		Num = (u16)Rest;
-	}
-	dprintk( "Num: %hd, Den: %hd, SD: %hd",Num, Den, (lo4 >> 12) & 0x1);
 
+	    dib0070_write_reg(st, 0x17, 0x30);
 
 
-	dib0070_write_reg(st, 0x11, (u16)FBDiv);
+	    VCOF_kHz = st->current_tune_table_index->vco_multi * freq * 2;
 
+	    switch (band) {
+	    case BAND_VHF:
+		REFDIV = (u8) ((st->cfg->clock_khz + 9999) / 10000);
+		break;
+	    case BAND_FM:
+		REFDIV = (u8) ((st->cfg->clock_khz) / 1000);
+		break;
+	    default:
+		REFDIV = (u8) ( st->cfg->clock_khz  / 10000);
+		break;
+	    }
+	    FREF = st->cfg->clock_khz / REFDIV;
 
-	dib0070_write_reg(st, 0x12, (Den << 8) | REFDIV);
 
 
-	dib0070_write_reg(st, 0x13, Num);
+	    switch (st->revision) {
+	    case DIB0070S_P1A:
+		FBDiv = (VCOF_kHz / st->current_tune_table_index->presc / FREF);
+		Rest  = (VCOF_kHz / st->current_tune_table_index->presc) - FBDiv * FREF;
+		break;
 
+	    case DIB0070_P1G:
+	    case DIB0070_P1F:
+	    default:
+		FBDiv = (freq / (FREF / 2));
+		Rest  = 2 * freq - FBDiv * FREF;
+		break;
+	    }
 
-	value = 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001;
 
-	switch (band) {
-		case BAND_UHF:   value |= 0x4000 | 0x0800; break;
-		case BAND_LBAND: value |= 0x2000 | 0x0400; break;
-		default:         value |= 0x8000 | 0x1000; break;
-	}
-	dib0070_write_reg(st, 0x20, value);
+	    if (Rest < LPF)              Rest = 0;
+	    else if (Rest < 2 * LPF)          Rest = 2 * LPF;
+	    else if (Rest > (FREF - LPF))   { Rest = 0 ; FBDiv += 1; }
+	    else if (Rest > (FREF - 2 * LPF)) Rest = FREF - 2 * LPF;
+	    Rest = (Rest * 6528) / (FREF / 10);
 
-	dib0070_captrim(st, lo4);
-	if (st->revision == DIB0070S_P1A) {
-		if (band == BAND_SBAND)
-			dib0070_write_reg(st, 0x15, 0x16e2);
-		else
-			dib0070_write_reg(st, 0x15, 0x56e5);
-	}
+	    Den = 1;
+	    if (Rest > 0) {
+		st->lo4 |= (1 << 14) | (1 << 12);
+		Den = 255;
+	    }
 
 
+	    dib0070_write_reg(st, 0x11, (u16)FBDiv);
+	    dib0070_write_reg(st, 0x12, (Den << 8) | REFDIV);
+	    dib0070_write_reg(st, 0x13, (u16) Rest);
 
-	switch (band) {
-		case BAND_UHF:   value = 0x7c82; break;
-		case BAND_LBAND: value = 0x7c84; break;
-		default:         value = 0x7c81; break;
-	}
-	dib0070_write_reg(st, 0x0f, value);
-	dib0070_write_reg(st, 0x06, 0x3fff);
+	    if (st->revision == DIB0070S_P1A) {
 
-	/* Front End */
-	/* c == TUNE, value = SWITCH */
-	c = 0;
-	value = 0;
-	switch (band) {
-		case BAND_FM:
-			c = 0; value = 1;
-		break;
+		if (band == BAND_SBAND) {
+		    dib0070_set_ctrl_lo5(fe, 2, 4, 3, 0);
+		    dib0070_write_reg(st, 0x1d,0xFFFF);
+		} else
+		    dib0070_set_ctrl_lo5(fe, 5, 4, 3, 1);
+	    }
 
-		case BAND_VHF:
-			if (freq <= 180000) c = 0;
-			else if (freq <= 188200) c = 1;
-			else if (freq <= 196400) c = 2;
-			else c = 3;
-			value = 1;
-		break;
 
-		case BAND_LBAND:
-			if (freq <= 1500000) c = 0;
-			else if (freq <= 1600000) c = 1;
-			else c = 3;
-		break;
+	    dib0070_write_reg(st, 0x20, 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001 | st->current_tune_table_index->tuner_enable);
 
-		case BAND_SBAND:
-			c = 7;
-			dib0070_write_reg(st, 0x1d,0xFFFF);
-		break;
+	    dprintk( "REFDIV: %hd, FREF: %d", REFDIV, FREF);
+	    dprintk( "FBDIV: %d, Rest: %d", FBDiv, Rest);
+	    dprintk( "Num: %hd, Den: %hd, SD: %hd",(u16) Rest, Den, (st->lo4 >> 12) & 0x1);
+	    dprintk( "HFDIV code: %hd", st->current_tune_table_index->hfdiv);
+	    dprintk( "VCO = %hd", st->current_tune_table_index->vco_band);
+	    dprintk( "VCOF: ((%hd*%d) << 1))", st->current_tune_table_index->vco_multi, freq);
 
-		case BAND_UHF:
-		default:
-			if (st->cfg->flip_chip) {
-				if (freq <= 550000) c = 0;
-				else if (freq <= 590000) c = 1;
-				else if (freq <= 666000) c = 3;
-				else c = 5;
-			} else {
-				if (freq <= 550000) c = 2;
-				else if (freq <= 650000) c = 3;
-				else if (freq <= 750000) c = 5;
-				else if (freq <= 850000) c = 6;
-				else c = 7;
-			}
-			value = 2;
-		break;
+	    *tune_state = CT_TUNER_STEP_0;
+	} else { /* we are already tuned to this frequency - the configuration is correct  */
+	    ret = 50; /* wakeup time */
+	    *tune_state = CT_TUNER_STEP_5;
+	}
+    } else if ((*tune_state > CT_TUNER_START) && (*tune_state < CT_TUNER_STEP_4)) {
+
+	ret = dib0070_captrim(st, tune_state);
+
+    } else if (*tune_state == CT_TUNER_STEP_4) {
+	const struct dib0070_wbd_gain_cfg *tmp = st->cfg->wbd_gain;
+	if (tmp != NULL) {
+	    while (freq/1000 > tmp->freq) /* find the right one */
+		tmp++;
+	    dib0070_write_reg(st, 0x0f, (0 << 15) | (1 << 14) | (3 << 12) | (tmp->wbd_gain_val << 9) | (0 << 8) | (1 << 7) | (st->current_tune_table_index->wbdmux << 0));
+	    st->wbd_gain_current = tmp->wbd_gain_val;
+	} else {
+	    dib0070_write_reg(st, 0x0f, (0 << 15) | (1 << 14) | (3 << 12) | (6 << 9) | (0 << 8) | (1 << 7) | (st->current_tune_table_index->wbdmux << 0));
+	    st->wbd_gain_current = 6;
 	}
 
-	/* default: LNA_MATCH=7, BIAS=3 */
-	dib0070_write_reg(st, 0x07, (value << 11) | (7 << 8) | (c << 3) | (3 << 0));
-	dib0070_write_reg(st, 0x08, (c << 10) | (3 << 7) | (127));
+	dib0070_write_reg(st, 0x06, 0x3fff);
+	dib0070_write_reg(st, 0x07, (st->current_tune_table_index->switch_trim << 11) | (7 << 8) | (st->lna_match->lna_band << 3) | (3 << 0));
+	dib0070_write_reg(st, 0x08, (st->lna_match->lna_band << 10) | (3 << 7) | (127));
 	dib0070_write_reg(st, 0x0d, 0x0d80);
 
 
 	dib0070_write_reg(st, 0x18,   0x07ff);
 	dib0070_write_reg(st, 0x17, 0x0033);
 
-	return 0;
+
+	*tune_state = CT_TUNER_STEP_5;
+    } else if (*tune_state == CT_TUNER_STEP_5) {
+	dib0070_set_bandwidth(fe, ch);
+	*tune_state = CT_TUNER_STOP;
+    } else {
+	ret = FE_CALLBACK_TIME_NEVER; /* tuner finished, time to call again infinite */
+    }
+    return ret;
+}
+
+
+static int dib0070_tune(struct dvb_frontend *fe, struct dvb_frontend_parameters *p)
+{
+    struct dib0070_state *state = fe->tuner_priv;
+    uint32_t ret;
+
+    state->tune_state = CT_TUNER_START;
+
+    do {
+	ret = dib0070_tune_digital(fe, p);
+	if (ret != FE_CALLBACK_TIME_NEVER)
+	    msleep(ret/10);
+	else
+	    break;
+    } while (state->tune_state != CT_TUNER_STOP);
+
+    return 0;
 }
 
 static int dib0070_wakeup(struct dvb_frontend *fe)
@@ -395,7 +505,7 @@ static int dib0070_sleep(struct dvb_frontend *fe)
 	return 0;
 }
 
-static u16 dib0070_p1f_defaults[] =
+static const u16 dib0070_p1f_defaults[] =
 
 {
 	7, 0x02,
@@ -434,45 +544,40 @@ static u16 dib0070_p1f_defaults[] =
 	0,
 };
 
-static void dib0070_wbd_calibration(struct dvb_frontend *fe)
+static u16 dib0070_read_wbd_offset(struct dib0070_state *state, u8 gain)
 {
-	u16 wbd_offs;
-	struct dib0070_state *state = fe->tuner_priv;
-
-	if (state->cfg->sleep)
-		state->cfg->sleep(fe, 0);
-
-	dib0070_write_reg(state, 0x0f, 0x6d81);
-	dib0070_write_reg(state, 0x20, 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001);
-	msleep(9);
-	wbd_offs = dib0070_read_reg(state, 0x19);
-	dib0070_write_reg(state, 0x20, 0);
-	state->wbd_ff_offset = ((wbd_offs * 8 * 18 / 33 + 1) / 2);
-	dprintk( "WBDStart = %d (Vargen) - FF = %hd", (u32) wbd_offs * 1800/1024, state->wbd_ff_offset);
-
-	if (state->cfg->sleep)
-		state->cfg->sleep(fe, 1);
+    u16 tuner_en = dib0070_read_reg(state, 0x20);
+    u16 offset;
+
+    dib0070_write_reg(state, 0x18, 0x07ff);
+    dib0070_write_reg(state, 0x20, 0x0800 | 0x4000 | 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001);
+    dib0070_write_reg(state, 0x0f, (1 << 14) | (2 << 12) | (gain << 9) | (1 << 8) | (1 << 7) | (0 << 0));
+    msleep(9);
+    offset = dib0070_read_reg(state, 0x19);
+    dib0070_write_reg(state, 0x20, tuner_en);
+    return offset;
+}
 
+static void dib0070_wbd_offset_calibration(struct dib0070_state *state)
+{
+    u8 gain;
+    for (gain = 6; gain < 8; gain++) {
+	state->wbd_offset_3_3[gain - 6] = ((dib0070_read_wbd_offset(state, gain) * 8 * 18 / 33 + 1) / 2);
+	dprintk( "Gain: %d, WBDOffset (3.3V) = %hd", gain, state->wbd_offset_3_3[gain-6]);
+    }
 }
 
 u16 dib0070_wbd_offset(struct dvb_frontend *fe)
 {
 	struct dib0070_state *st = fe->tuner_priv;
-	return st->wbd_ff_offset;
+	return st->wbd_offset_3_3[st->wbd_gain_current - 6];
 }
 
 EXPORT_SYMBOL(dib0070_wbd_offset);
-static int dib0070_set_ctrl_lo5(struct dvb_frontend *fe, u8 vco_bias_trim, u8 hf_div_trim, u8 cp_current, u8 third_order_filt)
-{
-	struct dib0070_state *state = fe->tuner_priv;
-    u16 lo5 = (third_order_filt << 14) | (0 << 13) | (1 << 12) | (3 << 9) | (cp_current << 6) | (hf_div_trim << 3) | (vco_bias_trim << 0);
-	dprintk( "CTRL_LO5: 0x%x", lo5);
-	return dib0070_write_reg(state, 0x15, lo5);
-}
-
 #define pgm_read_word(w) (*w)
-static int dib0070_reset(struct dib0070_state *state)
+static int dib0070_reset(struct dvb_frontend *fe)
 {
+    struct dib0070_state *state = fe->tuner_priv;
 	u16 l, r, *n;
 
 	HARD_RESET(state);
@@ -482,6 +587,8 @@ static int dib0070_reset(struct dib0070_state *state)
 	if ((dib0070_read_reg(state, 0x22) >> 9) & 0x1)
 		state->revision = (dib0070_read_reg(state, 0x1f) >> 8) & 0xff;
 	else
+#else
+#warning forcing SBAND
 #endif
 		state->revision = DIB0070S_P1A;
 
@@ -511,24 +618,27 @@ static int dib0070_reset(struct dib0070_state *state)
 	else
 		r = 2;
 
+
 	r |= state->cfg->osc_buffer_state << 3;
 
 	dib0070_write_reg(state, 0x10, r);
-	dib0070_write_reg(state, 0x1f, (1 << 8) | ((state->cfg->clock_pad_drive & 0xf) << 4));
+	dib0070_write_reg(state, 0x1f, (1 << 8) | ((state->cfg->clock_pad_drive & 0xf) << 5));
 
 	if (state->cfg->invert_iq) {
 		r = dib0070_read_reg(state, 0x02) & 0xffdf;
 		dib0070_write_reg(state, 0x02, r | (1 << 5));
 	}
 
-
-	if (state->revision == DIB0070S_P1A)
-		dib0070_set_ctrl_lo5(state->fe, 4, 7, 3, 1);
-	else
-		dib0070_set_ctrl_lo5(state->fe, 4, 4, 2, 0);
+    if (state->revision == DIB0070S_P1A)
+	dib0070_set_ctrl_lo5(fe, 2, 4, 3, 0);
+    else
+		dib0070_set_ctrl_lo5(fe, 5, 4, state->cfg->charge_pump, state->cfg->enable_third_order_filter);
 
 	dib0070_write_reg(state, 0x01, (54 << 9) | 0xc8);
-	return 0;
+
+    dib0070_wbd_offset_calibration(state);
+
+    return 0;
 }
 
 
@@ -539,7 +649,7 @@ static int dib0070_release(struct dvb_frontend *fe)
 	return 0;
 }
 
-static struct dvb_tuner_ops dib0070_ops = {
+static const struct dvb_tuner_ops dib0070_ops = {
 	.info = {
 		.name           = "DiBcom DiB0070",
 		.frequency_min  =  45000000,
@@ -550,7 +660,8 @@ static struct dvb_tuner_ops dib0070_ops = {
 
 	.init          = dib0070_wakeup,
 	.sleep         = dib0070_sleep,
-	.set_params    = dib0070_tune_digital,
+	.set_params    = dib0070_tune,
+
 //	.get_frequency = dib0070_get_frequency,
 //	.get_bandwidth = dib0070_get_bandwidth
 };
@@ -566,11 +677,9 @@ struct dvb_frontend * dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter
 	state->fe  = fe;
 	fe->tuner_priv = state;
 
-	if (dib0070_reset(state) != 0)
+	if (dib0070_reset(fe) != 0)
 		goto free_mem;
 
-	dib0070_wbd_calibration(fe);
-
 	printk(KERN_INFO "DiB0070: successfully identified\n");
 	memcpy(&fe->ops.tuner_ops, &dib0070_ops, sizeof(struct dvb_tuner_ops));
 
diff --git a/drivers/media/dvb/frontends/dib0070.h b/drivers/media/dvb/frontends/dib0070.h
index 9670f5d20cf..8c1c51cfaff 100644
--- a/drivers/media/dvb/frontends/dib0070.h
+++ b/drivers/media/dvb/frontends/dib0070.h
@@ -15,6 +15,11 @@ struct i2c_adapter;
 
 #define DEFAULT_DIB0070_I2C_ADDRESS 0x60
 
+struct dib0070_wbd_gain_cfg {
+    u16 freq;
+    u16 wbd_gain_val;
+};
+
 struct dib0070_config {
 	u8 i2c_address;
 
@@ -35,6 +40,12 @@ struct dib0070_config {
 	u8 force_crystal_mode; /* if == 0 -> decision is made in the driver default: <24 -> 2, >=24 -> 1 */
 
 	u8 flip_chip;
+    u8 enable_third_order_filter;
+    u8 charge_pump;
+
+	const struct dib0070_wbd_gain_cfg * wbd_gain;
+
+    u8 vga_filter;
 };
 
 #if defined(CONFIG_DVB_TUNER_DIB0070) || (defined(CONFIG_DVB_TUNER_DIB0070_MODULE) && defined(MODULE))
-- 
cgit v1.2.3


From 2a6a30e05cc4afa4aa4da406ece75e6846d5b408 Mon Sep 17 00:00:00 2001
From: Patrick Boettcher <pboettcher@kernellabs.com>
Date: Mon, 17 Aug 2009 05:13:28 -0300
Subject: V4L/DVB (12899): DiB0070: Indenting driver with indent -linux

In order to follow a little bit the kernel coding style from now on
after the generation of that driver file and indent -linux call is
emitted.

Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/frontends/dib0070.c | 768 +++++++++++++++++-----------------
 drivers/media/dvb/frontends/dib0070.h |  31 +-
 2 files changed, 405 insertions(+), 394 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/frontends/dib0070.c b/drivers/media/dvb/frontends/dib0070.c
index 2eb9bdb4dbb..2be17b93e0b 100644
--- a/drivers/media/dvb/frontends/dib0070.c
+++ b/drivers/media/dvb/frontends/dib0070.c
@@ -50,16 +50,16 @@ MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
 #define DIB0070S_P1A 0x02
 
 enum frontend_tune_state {
-    CT_TUNER_START = 10,
-    CT_TUNER_STEP_0,
-    CT_TUNER_STEP_1,
-    CT_TUNER_STEP_2,
-    CT_TUNER_STEP_3,
-    CT_TUNER_STEP_4,
-    CT_TUNER_STEP_5,
-    CT_TUNER_STEP_6,
-    CT_TUNER_STEP_7,
-    CT_TUNER_STOP,
+	CT_TUNER_START = 10,
+	CT_TUNER_STEP_0,
+	CT_TUNER_STEP_1,
+	CT_TUNER_STEP_2,
+	CT_TUNER_STEP_3,
+	CT_TUNER_STEP_4,
+	CT_TUNER_STEP_5,
+	CT_TUNER_STEP_6,
+	CT_TUNER_STEP_7,
+	CT_TUNER_STOP,
 };
 
 #define FE_CALLBACK_TIME_NEVER 0xffffffff
@@ -71,10 +71,10 @@ struct dib0070_state {
 	u16 wbd_ff_offset;
 	u8 revision;
 
-    enum frontend_tune_state tune_state;
-    u32 current_rf;
+	enum frontend_tune_state tune_state;
+	u32 current_rf;
 
-    /* for the captrim binary search */
+	/* for the captrim binary search */
 	s8 step;
 	u16 adc_diff;
 
@@ -85,7 +85,7 @@ struct dib0070_state {
 	const struct dib0070_tuning *current_tune_table_index;
 	const struct dib0070_lna_match *lna_match;
 
-    u8  wbd_gain_current;
+	u8 wbd_gain_current;
 	u16 wbd_offset_3_3[2];
 };
 
@@ -93,8 +93,8 @@ static uint16_t dib0070_read_reg(struct dib0070_state *state, u8 reg)
 {
 	u8 b[2];
 	struct i2c_msg msg[2] = {
-		{ .addr = state->cfg->i2c_address, .flags = 0,        .buf = &reg, .len = 1 },
-		{ .addr = state->cfg->i2c_address, .flags = I2C_M_RD, .buf = b,  .len = 2 },
+		{.addr = state->cfg->i2c_address,.flags = 0,.buf = &reg,.len = 1},
+		{.addr = state->cfg->i2c_address,.flags = I2C_M_RD,.buf = b,.len = 2},
 	};
 	if (i2c_transfer(state->i2c, msg, 2) != 2) {
 		printk(KERN_WARNING "DiB0070 I2C read failed\n");
@@ -106,7 +106,7 @@ static uint16_t dib0070_read_reg(struct dib0070_state *state, u8 reg)
 static int dib0070_write_reg(struct dib0070_state *state, u8 reg, u16 val)
 {
 	u8 b[3] = { reg, val >> 8, val & 0xff };
-	struct i2c_msg msg = { .addr = state->cfg->i2c_address, .flags = 0, .buf = b, .len = 3 };
+	struct i2c_msg msg = {.addr = state->cfg->i2c_address,.flags = 0,.buf = b,.len = 3 };
 	if (i2c_transfer(state->i2c, &msg, 1) != 1) {
 		printk(KERN_WARNING "DiB0070 I2C write failed\n");
 		return -EREMOTEIO;
@@ -124,34 +124,34 @@ static int dib0070_write_reg(struct dib0070_state *state, u8 reg, u16 val)
 
 static int dib0070_set_bandwidth(struct dvb_frontend *fe, struct dvb_frontend_parameters *ch)
 {
-    struct dib0070_state *st = fe->tuner_priv;
-    u16 tmp = dib0070_read_reg(st, 0x02) & 0x3fff;
-
-    if (fe->dtv_property_cache.bandwidth_hz/1000 > 7000)
-	tmp |= (0 << 14);
-    else if (fe->dtv_property_cache.bandwidth_hz/1000 > 6000)
-	tmp |= (1 << 14);
-    else if (fe->dtv_property_cache.bandwidth_hz/1000 > 5000)
-	tmp |= (2 << 14);
-    else
-	tmp |= (3 << 14);
-
-    dib0070_write_reg(st, 0x02, tmp);
-
-    /* sharpen the BB filter in ISDB-T to have higher immunity to adjacent channels */
-    if (fe->dtv_property_cache.delivery_system == SYS_ISDBT) {
-	u16 value = dib0070_read_reg(st, 0x17);
-
-	dib0070_write_reg(st, 0x17, value & 0xfffc);
-	tmp = dib0070_read_reg(st, 0x01) & 0x01ff;
-	dib0070_write_reg(st, 0x01, tmp | (60 << 9));
-
-	dib0070_write_reg(st, 0x17, value);
-    }
+	struct dib0070_state *state = fe->tuner_priv;
+	u16 tmp = dib0070_read_reg(state, 0x02) & 0x3fff;
+
+	if (state->fe->dtv_property_cache.bandwidth_hz / 1000 > 7000)
+		tmp |= (0 << 14);
+	else if (state->fe->dtv_property_cache.bandwidth_hz / 1000 > 6000)
+		tmp |= (1 << 14);
+	else if (state->fe->dtv_property_cache.bandwidth_hz / 1000 > 5000)
+		tmp |= (2 << 14);
+	else
+		tmp |= (3 << 14);
+
+	dib0070_write_reg(state, 0x02, tmp);
+
+	/* sharpen the BB filter in ISDB-T to have higher immunity to adjacent channels */
+	if (state->fe->dtv_property_cache.delivery_system == SYS_ISDBT) {
+		u16 value = dib0070_read_reg(state, 0x17);
+
+		dib0070_write_reg(state, 0x17, value & 0xfffc);
+		tmp = dib0070_read_reg(state, 0x01) & 0x01ff;
+		dib0070_write_reg(state, 0x01, tmp | (60 << 9));
+
+		dib0070_write_reg(state, 0x17, value);
+	}
 	return 0;
 }
 
-static int dib0070_captrim(struct dib0070_state *st, enum frontend_tune_state *tune_state)
+static int dib0070_captrim(struct dib0070_state *state, enum frontend_tune_state *tune_state)
 {
 	int8_t step_sign;
 	u16 adc;
@@ -159,26 +159,26 @@ static int dib0070_captrim(struct dib0070_state *st, enum frontend_tune_state *t
 
 	if (*tune_state == CT_TUNER_STEP_0) {
 
-		dib0070_write_reg(st, 0x0f, 0xed10);
-		dib0070_write_reg(st, 0x17,    0x0034);
+		dib0070_write_reg(state, 0x0f, 0xed10);
+		dib0070_write_reg(state, 0x17, 0x0034);
 
-		dib0070_write_reg(st, 0x18, 0x0032);
-		st->step = st->captrim = st->fcaptrim = 64;
-		st->adc_diff = 3000;
+		dib0070_write_reg(state, 0x18, 0x0032);
+		state->step = state->captrim = state->fcaptrim = 64;
+		state->adc_diff = 3000;
 		ret = 20;
 
-	*tune_state = CT_TUNER_STEP_1;
+		*tune_state = CT_TUNER_STEP_1;
 	} else if (*tune_state == CT_TUNER_STEP_1) {
-		st->step /= 2;
-		dib0070_write_reg(st, 0x14, st->lo4 | st->captrim);
+		state->step /= 2;
+		dib0070_write_reg(state, 0x14, state->lo4 | state->captrim);
 		ret = 15;
 
 		*tune_state = CT_TUNER_STEP_2;
 	} else if (*tune_state == CT_TUNER_STEP_2) {
 
-		adc = dib0070_read_reg(st, 0x19);
+		adc = dib0070_read_reg(state, 0x19);
 
-		dprintk( "CAPTRIM=%hd; ADC = %hd (ADC) & %dmV", st->captrim, adc, (u32) adc*(u32)1800/(u32)1024);
+		dprintk("CAPTRIM=%hd; ADC = %hd (ADC) & %dmV", state->captrim, adc, (u32) adc * (u32) 1800 / (u32) 1024);
 
 		if (adc >= 400) {
 			adc -= 400;
@@ -188,24 +188,22 @@ static int dib0070_captrim(struct dib0070_state *st, enum frontend_tune_state *t
 			step_sign = 1;
 		}
 
-		if (adc < st->adc_diff) {
-			dprintk( "CAPTRIM=%hd is closer to target (%hd/%hd)", st->captrim, adc, st->adc_diff);
-			st->adc_diff = adc;
-			st->fcaptrim = st->captrim;
-
-
+		if (adc < state->adc_diff) {
+			dprintk("CAPTRIM=%hd is closer to target (%hd/%hd)", state->captrim, adc, state->adc_diff);
+			state->adc_diff = adc;
+			state->fcaptrim = state->captrim;
 
 		}
-		st->captrim += (step_sign * st->step);
+		state->captrim += (step_sign * state->step);
 
-		if (st->step >= 1)
+		if (state->step >= 1)
 			*tune_state = CT_TUNER_STEP_1;
 		else
 			*tune_state = CT_TUNER_STEP_3;
 
 	} else if (*tune_state == CT_TUNER_STEP_3) {
-		dib0070_write_reg(st, 0x14, st->lo4 | st->fcaptrim);
-		dib0070_write_reg(st, 0x18, 0x07ff);
+		dib0070_write_reg(state, 0x14, state->lo4 | state->fcaptrim);
+		dib0070_write_reg(state, 0x18, 0x07ff);
 		*tune_state = CT_TUNER_STEP_4;
 	}
 
@@ -215,374 +213,391 @@ static int dib0070_captrim(struct dib0070_state *st, enum frontend_tune_state *t
 static int dib0070_set_ctrl_lo5(struct dvb_frontend *fe, u8 vco_bias_trim, u8 hf_div_trim, u8 cp_current, u8 third_order_filt)
 {
 	struct dib0070_state *state = fe->tuner_priv;
-    u16 lo5 = (third_order_filt << 14) | (0 << 13) | (1 << 12) | (3 << 9) | (cp_current << 6) | (hf_div_trim << 3) | (vco_bias_trim << 0);
-	dprintk( "CTRL_LO5: 0x%x", lo5);
+	u16 lo5 = (third_order_filt << 14) | (0 << 13) | (1 << 12) | (3 << 9) | (cp_current << 6) | (hf_div_trim << 3) | (vco_bias_trim << 0);
+	dprintk("CTRL_LO5: 0x%x", lo5);
 	return dib0070_write_reg(state, 0x15, lo5);
 }
 
-struct dib0070_tuning
-{
-    u32 max_freq; /* for every frequency less than or equal to that field: this information is correct */
-    u8 switch_trim;
-    u8 vco_band;
-    u8 hfdiv;
-    u8 vco_multi;
-    u8 presc;
-    u8 wbdmux;
-    u16 tuner_enable;
-};
-
-struct dib0070_lna_match
+void dib0070_ctrl_agc_filter(struct dvb_frontend *fe, u8 open)
 {
-    u32 max_freq; /* for every frequency less than or equal to that field: this information is correct */
-    u8 lna_band;
-};
+	struct dib0070_state *state = fe->tuner_priv;
 
-static const struct dib0070_tuning dib0070s_tuning_table[] =
+	if (open) {
+		dib0070_write_reg(state, 0x1b, 0xff00);
+		dib0070_write_reg(state, 0x1a, 0x0000);
+	} else {
+		dib0070_write_reg(state, 0x1b, 0x4112);
+		if (state->cfg->vga_filter != 0) {
+			dib0070_write_reg(state, 0x1a, state->cfg->vga_filter);
+			dprintk("vga filter register is set to %x", state->cfg->vga_filter);
+		} else
+			dib0070_write_reg(state, 0x1a, 0x0009);
+	}
+}
 
-{
-    {     570000, 2, 1, 3, 6, 6, 2, 0x4000 | 0x0800 }, /* UHF */
-    {     700000, 2, 0, 2, 4, 2, 2, 0x4000 | 0x0800 },
-    {     863999, 2, 1, 2, 4, 2, 2, 0x4000 | 0x0800 },
-    {    1500000, 0, 1, 1, 2, 2, 4, 0x2000 | 0x0400 }, /* LBAND */
-    {    1600000, 0, 1, 1, 2, 2, 4, 0x2000 | 0x0400 },
-    {    2000000, 0, 1, 1, 2, 2, 4, 0x2000 | 0x0400 },
-    { 0xffffffff, 0, 0, 8, 1, 2, 1, 0x8000 | 0x1000 }, /* SBAND */
+EXPORT_SYMBOL(dib0070_ctrl_agc_filter);
+struct dib0070_tuning {
+	u32 max_freq;		/* for every frequency less than or equal to that field: this information is correct */
+	u8 switch_trim;
+	u8 vco_band;
+	u8 hfdiv;
+	u8 vco_multi;
+	u8 presc;
+	u8 wbdmux;
+	u16 tuner_enable;
 };
 
-static const struct dib0070_tuning dib0070_tuning_table[] =
-
-{
-    {     115000, 1, 0, 7, 24, 2, 1, 0x8000 | 0x1000 }, /* FM below 92MHz cannot be tuned */
-    {     179500, 1, 0, 3, 16, 2, 1, 0x8000 | 0x1000 }, /* VHF */
-    {     189999, 1, 1, 3, 16, 2, 1, 0x8000 | 0x1000 },
-    {     250000, 1, 0, 6, 12, 2, 1, 0x8000 | 0x1000 },
-    {     569999, 2, 1, 5,  6, 2, 2, 0x4000 | 0x0800 }, /* UHF */
-    {     699999, 2, 0 ,1,  4, 2, 2, 0x4000 | 0x0800 },
-    {     863999, 2, 1, 1,  4, 2, 2, 0x4000 | 0x0800 },
-    { 0xffffffff, 0, 1, 0,  2, 2, 4, 0x2000 | 0x0400 }, /* LBAND or everything higher than UHF */
+struct dib0070_lna_match {
+	u32 max_freq;		/* for every frequency less than or equal to that field: this information is correct */
+	u8 lna_band;
 };
 
-static const struct dib0070_lna_match dib0070_lna_flip_chip[] =
+static const struct dib0070_tuning dib0070s_tuning_table[] = {
+	{570000, 2, 1, 3, 6, 6, 2, 0x4000 | 0x0800},	/* UHF */
+	{700000, 2, 0, 2, 4, 2, 2, 0x4000 | 0x0800},
+	{863999, 2, 1, 2, 4, 2, 2, 0x4000 | 0x0800},
+	{1500000, 0, 1, 1, 2, 2, 4, 0x2000 | 0x0400},	/* LBAND */
+	{1600000, 0, 1, 1, 2, 2, 4, 0x2000 | 0x0400},
+	{2000000, 0, 1, 1, 2, 2, 4, 0x2000 | 0x0400},
+	{0xffffffff, 0, 0, 8, 1, 2, 1, 0x8000 | 0x1000},	/* SBAND */
+};
 
-{
-    {     180000, 0 }, /* VHF */
-    {     188000, 1 },
-    {     196400, 2 },
-    {     250000, 3 },
-    {     550000, 0 }, /* UHF */
-    {     590000, 1 },
-    {     666000, 3 },
-    {     864000, 5 },
-    {    1500000, 0 }, /* LBAND or everything higher than UHF */
-    {    1600000, 1 },
-    {    2000000, 3 },
-    { 0xffffffff, 7 },
+static const struct dib0070_tuning dib0070_tuning_table[] = {
+	{115000, 1, 0, 7, 24, 2, 1, 0x8000 | 0x1000},	/* FM below 92MHz cannot be tuned */
+	{179500, 1, 0, 3, 16, 2, 1, 0x8000 | 0x1000},	/* VHF */
+	{189999, 1, 1, 3, 16, 2, 1, 0x8000 | 0x1000},
+	{250000, 1, 0, 6, 12, 2, 1, 0x8000 | 0x1000},
+	{569999, 2, 1, 5, 6, 2, 2, 0x4000 | 0x0800},	/* UHF */
+	{699999, 2, 0, 1, 4, 2, 2, 0x4000 | 0x0800},
+	{863999, 2, 1, 1, 4, 2, 2, 0x4000 | 0x0800},
+	{0xffffffff, 0, 1, 0, 2, 2, 4, 0x2000 | 0x0400},	/* LBAND or everything higher than UHF */
 };
 
-static const struct dib0070_lna_match dib0070_lna[] =
+static const struct dib0070_lna_match dib0070_lna_flip_chip[] = {
+	{180000, 0},		/* VHF */
+	{188000, 1},
+	{196400, 2},
+	{250000, 3},
+	{550000, 0},		/* UHF */
+	{590000, 1},
+	{666000, 3},
+	{864000, 5},
+	{1500000, 0},		/* LBAND or everything higher than UHF */
+	{1600000, 1},
+	{2000000, 3},
+	{0xffffffff, 7},
+};
 
-{
-    {     180000, 0 }, /* VHF */
-    {     188000, 1 },
-    {     196400, 2 },
-    {     250000, 3 },
-    {     550000, 2 }, /* UHF */
-    {     650000, 3 },
-    {     750000, 5 },
-    {     850000, 6 },
-    {     864000, 7 },
-    {    1500000, 0 }, /* LBAND or everything higher than UHF */
-    {    1600000, 1 },
-    {    2000000, 3 },
-    { 0xffffffff, 7 },
+static const struct dib0070_lna_match dib0070_lna[] = {
+	{180000, 0},		/* VHF */
+	{188000, 1},
+	{196400, 2},
+	{250000, 3},
+	{550000, 2},		/* UHF */
+	{650000, 3},
+	{750000, 5},
+	{850000, 6},
+	{864000, 7},
+	{1500000, 0},		/* LBAND or everything higher than UHF */
+	{1600000, 1},
+	{2000000, 3},
+	{0xffffffff, 7},
 };
 
-#define LPF	100                       // define for the loop filter 100kHz by default 16-07-06
+#define LPF	100		// define for the loop filter 100kHz by default 16-07-06
 static int dib0070_tune_digital(struct dvb_frontend *fe, struct dvb_frontend_parameters *ch)
 {
-    struct dib0070_state *st = fe->tuner_priv;
-
-    const struct dib0070_tuning *tune;
-    const struct dib0070_lna_match *lna_match;
-
-    enum frontend_tune_state *tune_state = &st->tune_state;
-    int ret = 10; /* 1ms is the default delay most of the time */
-
-    u8  band = (u8)BAND_OF_FREQUENCY(ch->frequency/1000);
-    u32 freq = ch->frequency/1000 + (band == BAND_VHF ? st->cfg->freq_offset_khz_vhf : st->cfg->freq_offset_khz_uhf);
-
-
-
+	struct dib0070_state *state = fe->tuner_priv;
 
+	const struct dib0070_tuning *tune;
+	const struct dib0070_lna_match *lna_match;
 
-#ifdef CONFIG_STANDARD_ISDBT
-    if (fe->dtv_property_cache.delivery_system == SYS_ISDBT && ch->u.isdbt.sb_mode == 1)
-	if ( ( (ch->u.isdbt.sb_conn_total_seg % 2)       && (ch->u.isdbt.sb_wanted_seg == ((ch->u.isdbt.sb_conn_total_seg/2) + 1) ) ) ||
-	   ( ( (ch->u.isdbt.sb_conn_total_seg % 2) == 0) && (ch->u.isdbt.sb_wanted_seg ==  (ch->u.isdbt.sb_conn_total_seg/2)      ) ) ||
-	   ( ( (ch->u.isdbt.sb_conn_total_seg % 2) == 0) && (ch->u.isdbt.sb_wanted_seg == ((ch->u.isdbt.sb_conn_total_seg/2)+1))) )
-	    freq += 850;
+	enum frontend_tune_state *tune_state = &state->tune_state;
+	int ret = 10;		/* 1ms is the default delay most of the time */
+
+	u8 band = (u8) BAND_OF_FREQUENCY(fe->dtv_property_cache.frequency / 1000);
+	u32 freq = fe->dtv_property_cache.frequency / 1000 + (band == BAND_VHF ? state->cfg->freq_offset_khz_vhf : state->cfg->freq_offset_khz_uhf);
+
+#ifdef CONFIG_SYS_ISDBT
+	if (state->fe->dtv_property_cache.delivery_system == SYS_ISDBT && state->fe->dtv_property_cache.isdbt_sb_mode == 1)
+		if (((state->fe->dtv_property_cache.isdbt_sb_segment_count % 2)
+		     && (state->fe->dtv_property_cache.isdbt_sb_segment_idx == ((state->fe->dtv_property_cache.isdbt_sb_segment_count / 2) + 1)))
+		    || (((state->fe->dtv_property_cache.isdbt_sb_segment_count % 2) == 0)
+			&& (state->fe->dtv_property_cache.isdbt_sb_segment_idx == (state->fe->dtv_property_cache.isdbt_sb_segment_count / 2)))
+		    || (((state->fe->dtv_property_cache.isdbt_sb_segment_count % 2) == 0)
+			&& (state->fe->dtv_property_cache.isdbt_sb_segment_idx == ((state->fe->dtv_property_cache.isdbt_sb_segment_count / 2) + 1))))
+			freq += 850;
 #endif
-    if (st->current_rf != freq) {
-
-	switch (st->revision) {
-	case DIB0070S_P1A:
-	    tune = dib0070s_tuning_table;
-	    lna_match = dib0070_lna;
-	    break;
-	default:
-	    tune = dib0070_tuning_table;
-	    if (st->cfg->flip_chip)
-		lna_match = dib0070_lna_flip_chip;
-	    else
-		lna_match = dib0070_lna;
-	    break;
-	}
-	while (freq > tune->max_freq) /* find the right one */
-	    tune++;
-	while (freq > lna_match->max_freq) /* find the right one */
-	    lna_match++;
-
-	st->current_tune_table_index = tune;
-	st->lna_match = lna_match;
-    }
-
-    if (*tune_state == CT_TUNER_START) {
-	dprintk( "Tuning for Band: %hd (%d kHz)", band, freq);
-	if (st->current_rf != freq) {
-	    u8 REFDIV;
-	    u32 FBDiv, Rest, FREF, VCOF_kHz;
-	    u8 Den;
-
-	    st->current_rf = freq;
-	    st->lo4 = (st->current_tune_table_index->vco_band << 11) | (st->current_tune_table_index->hfdiv << 7);
-
-
-	    dib0070_write_reg(st, 0x17, 0x30);
-
-
-	    VCOF_kHz = st->current_tune_table_index->vco_multi * freq * 2;
-
-	    switch (band) {
-	    case BAND_VHF:
-		REFDIV = (u8) ((st->cfg->clock_khz + 9999) / 10000);
-		break;
-	    case BAND_FM:
-		REFDIV = (u8) ((st->cfg->clock_khz) / 1000);
-		break;
-	    default:
-		REFDIV = (u8) ( st->cfg->clock_khz  / 10000);
-		break;
-	    }
-	    FREF = st->cfg->clock_khz / REFDIV;
-
-
-
-	    switch (st->revision) {
-	    case DIB0070S_P1A:
-		FBDiv = (VCOF_kHz / st->current_tune_table_index->presc / FREF);
-		Rest  = (VCOF_kHz / st->current_tune_table_index->presc) - FBDiv * FREF;
-		break;
-
-	    case DIB0070_P1G:
-	    case DIB0070_P1F:
-	    default:
-		FBDiv = (freq / (FREF / 2));
-		Rest  = 2 * freq - FBDiv * FREF;
-		break;
-	    }
-
-
-	    if (Rest < LPF)              Rest = 0;
-	    else if (Rest < 2 * LPF)          Rest = 2 * LPF;
-	    else if (Rest > (FREF - LPF))   { Rest = 0 ; FBDiv += 1; }
-	    else if (Rest > (FREF - 2 * LPF)) Rest = FREF - 2 * LPF;
-	    Rest = (Rest * 6528) / (FREF / 10);
-
-	    Den = 1;
-	    if (Rest > 0) {
-		st->lo4 |= (1 << 14) | (1 << 12);
-		Den = 255;
-	    }
-
-
-	    dib0070_write_reg(st, 0x11, (u16)FBDiv);
-	    dib0070_write_reg(st, 0x12, (Den << 8) | REFDIV);
-	    dib0070_write_reg(st, 0x13, (u16) Rest);
-
-	    if (st->revision == DIB0070S_P1A) {
-
-		if (band == BAND_SBAND) {
-		    dib0070_set_ctrl_lo5(fe, 2, 4, 3, 0);
-		    dib0070_write_reg(st, 0x1d,0xFFFF);
-		} else
-		    dib0070_set_ctrl_lo5(fe, 5, 4, 3, 1);
-	    }
-
+	if (state->current_rf != freq) {
+
+		switch (state->revision) {
+		case DIB0070S_P1A:
+			tune = dib0070s_tuning_table;
+			lna_match = dib0070_lna;
+			break;
+		default:
+			tune = dib0070_tuning_table;
+			if (state->cfg->flip_chip)
+				lna_match = dib0070_lna_flip_chip;
+			else
+				lna_match = dib0070_lna;
+			break;
+		}
+		while (freq > tune->max_freq)	/* find the right one */
+			tune++;
+		while (freq > lna_match->max_freq)	/* find the right one */
+			lna_match++;
 
-	    dib0070_write_reg(st, 0x20, 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001 | st->current_tune_table_index->tuner_enable);
+		state->current_tune_table_index = tune;
+		state->lna_match = lna_match;
+	}
 
-	    dprintk( "REFDIV: %hd, FREF: %d", REFDIV, FREF);
-	    dprintk( "FBDIV: %d, Rest: %d", FBDiv, Rest);
-	    dprintk( "Num: %hd, Den: %hd, SD: %hd",(u16) Rest, Den, (st->lo4 >> 12) & 0x1);
-	    dprintk( "HFDIV code: %hd", st->current_tune_table_index->hfdiv);
-	    dprintk( "VCO = %hd", st->current_tune_table_index->vco_band);
-	    dprintk( "VCOF: ((%hd*%d) << 1))", st->current_tune_table_index->vco_multi, freq);
+	if (*tune_state == CT_TUNER_START) {
+		dprintk("Tuning for Band: %hd (%d kHz)", band, freq);
+		if (state->current_rf != freq) {
+			u8 REFDIV;
+			u32 FBDiv, Rest, FREF, VCOF_kHz;
+			u8 Den;
+
+			state->current_rf = freq;
+			state->lo4 = (state->current_tune_table_index->vco_band << 11) | (state->current_tune_table_index->hfdiv << 7);
+
+			dib0070_write_reg(state, 0x17, 0x30);
+
+			VCOF_kHz = state->current_tune_table_index->vco_multi * freq * 2;
+
+			switch (band) {
+			case BAND_VHF:
+				REFDIV = (u8) ((state->cfg->clock_khz + 9999) / 10000);
+				break;
+			case BAND_FM:
+				REFDIV = (u8) ((state->cfg->clock_khz) / 1000);
+				break;
+			default:
+				REFDIV = (u8) (state->cfg->clock_khz / 10000);
+				break;
+			}
+			FREF = state->cfg->clock_khz / REFDIV;
+
+			switch (state->revision) {
+			case DIB0070S_P1A:
+				FBDiv = (VCOF_kHz / state->current_tune_table_index->presc / FREF);
+				Rest = (VCOF_kHz / state->current_tune_table_index->presc) - FBDiv * FREF;
+				break;
+
+			case DIB0070_P1G:
+			case DIB0070_P1F:
+			default:
+				FBDiv = (freq / (FREF / 2));
+				Rest = 2 * freq - FBDiv * FREF;
+				break;
+			}
+
+			if (Rest < LPF)
+				Rest = 0;
+			else if (Rest < 2 * LPF)
+				Rest = 2 * LPF;
+			else if (Rest > (FREF - LPF)) {
+				Rest = 0;
+				FBDiv += 1;
+			} else if (Rest > (FREF - 2 * LPF))
+				Rest = FREF - 2 * LPF;
+			Rest = (Rest * 6528) / (FREF / 10);
+
+			Den = 1;
+			if (Rest > 0) {
+				state->lo4 |= (1 << 14) | (1 << 12);
+				Den = 255;
+			}
+
+			dib0070_write_reg(state, 0x11, (u16) FBDiv);
+			dib0070_write_reg(state, 0x12, (Den << 8) | REFDIV);
+			dib0070_write_reg(state, 0x13, (u16) Rest);
+
+			if (state->revision == DIB0070S_P1A) {
+
+				if (band == BAND_SBAND) {
+					dib0070_set_ctrl_lo5(fe, 2, 4, 3, 0);
+					dib0070_write_reg(state, 0x1d, 0xFFFF);
+				} else
+					dib0070_set_ctrl_lo5(fe, 5, 4, 3, 1);
+			}
+
+			dib0070_write_reg(state, 0x20,
+					  0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001 | state->current_tune_table_index->tuner_enable);
+
+			dprintk("REFDIV: %hd, FREF: %d", REFDIV, FREF);
+			dprintk("FBDIV: %d, Rest: %d", FBDiv, Rest);
+			dprintk("Num: %hd, Den: %hd, SD: %hd", (u16) Rest, Den, (state->lo4 >> 12) & 0x1);
+			dprintk("HFDIV code: %hd", state->current_tune_table_index->hfdiv);
+			dprintk("VCO = %hd", state->current_tune_table_index->vco_band);
+			dprintk("VCOF: ((%hd*%d) << 1))", state->current_tune_table_index->vco_multi, freq);
+
+			*tune_state = CT_TUNER_STEP_0;
+		} else {	/* we are already tuned to this frequency - the configuration is correct  */
+			ret = 50;	/* wakeup time */
+			*tune_state = CT_TUNER_STEP_5;
+		}
+	} else if ((*tune_state > CT_TUNER_START) && (*tune_state < CT_TUNER_STEP_4)) {
+
+		ret = dib0070_captrim(state, tune_state);
+
+	} else if (*tune_state == CT_TUNER_STEP_4) {
+		const struct dib0070_wbd_gain_cfg *tmp = state->cfg->wbd_gain;
+		if (tmp != NULL) {
+			while (freq / 1000 > tmp->freq)	/* find the right one */
+				tmp++;
+			dib0070_write_reg(state, 0x0f,
+					  (0 << 15) | (1 << 14) | (3 << 12) | (tmp->wbd_gain_val << 9) | (0 << 8) | (1 << 7) | (state->
+																current_tune_table_index->
+																wbdmux << 0));
+			state->wbd_gain_current = tmp->wbd_gain_val;
+		} else {
+			dib0070_write_reg(state, 0x0f,
+					  (0 << 15) | (1 << 14) | (3 << 12) | (6 << 9) | (0 << 8) | (1 << 7) | (state->current_tune_table_index->
+														wbdmux << 0));
+			state->wbd_gain_current = 6;
+		}
 
-	    *tune_state = CT_TUNER_STEP_0;
-	} else { /* we are already tuned to this frequency - the configuration is correct  */
-	    ret = 50; /* wakeup time */
-	    *tune_state = CT_TUNER_STEP_5;
-	}
-    } else if ((*tune_state > CT_TUNER_START) && (*tune_state < CT_TUNER_STEP_4)) {
+		dib0070_write_reg(state, 0x06, 0x3fff);
+		dib0070_write_reg(state, 0x07,
+				  (state->current_tune_table_index->switch_trim << 11) | (7 << 8) | (state->lna_match->lna_band << 3) | (3 << 0));
+		dib0070_write_reg(state, 0x08, (state->lna_match->lna_band << 10) | (3 << 7) | (127));
+		dib0070_write_reg(state, 0x0d, 0x0d80);
 
-	ret = dib0070_captrim(st, tune_state);
+		dib0070_write_reg(state, 0x18, 0x07ff);
+		dib0070_write_reg(state, 0x17, 0x0033);
 
-    } else if (*tune_state == CT_TUNER_STEP_4) {
-	const struct dib0070_wbd_gain_cfg *tmp = st->cfg->wbd_gain;
-	if (tmp != NULL) {
-	    while (freq/1000 > tmp->freq) /* find the right one */
-		tmp++;
-	    dib0070_write_reg(st, 0x0f, (0 << 15) | (1 << 14) | (3 << 12) | (tmp->wbd_gain_val << 9) | (0 << 8) | (1 << 7) | (st->current_tune_table_index->wbdmux << 0));
-	    st->wbd_gain_current = tmp->wbd_gain_val;
+		*tune_state = CT_TUNER_STEP_5;
+	} else if (*tune_state == CT_TUNER_STEP_5) {
+		dib0070_set_bandwidth(fe, ch);
+		*tune_state = CT_TUNER_STOP;
 	} else {
-	    dib0070_write_reg(st, 0x0f, (0 << 15) | (1 << 14) | (3 << 12) | (6 << 9) | (0 << 8) | (1 << 7) | (st->current_tune_table_index->wbdmux << 0));
-	    st->wbd_gain_current = 6;
+		ret = FE_CALLBACK_TIME_NEVER;	/* tuner finished, time to call again infinite */
 	}
-
-	dib0070_write_reg(st, 0x06, 0x3fff);
-	dib0070_write_reg(st, 0x07, (st->current_tune_table_index->switch_trim << 11) | (7 << 8) | (st->lna_match->lna_band << 3) | (3 << 0));
-	dib0070_write_reg(st, 0x08, (st->lna_match->lna_band << 10) | (3 << 7) | (127));
-	dib0070_write_reg(st, 0x0d, 0x0d80);
-
-
-	dib0070_write_reg(st, 0x18,   0x07ff);
-	dib0070_write_reg(st, 0x17, 0x0033);
-
-
-	*tune_state = CT_TUNER_STEP_5;
-    } else if (*tune_state == CT_TUNER_STEP_5) {
-	dib0070_set_bandwidth(fe, ch);
-	*tune_state = CT_TUNER_STOP;
-    } else {
-	ret = FE_CALLBACK_TIME_NEVER; /* tuner finished, time to call again infinite */
-    }
-    return ret;
+	return ret;
 }
 
-
 static int dib0070_tune(struct dvb_frontend *fe, struct dvb_frontend_parameters *p)
 {
-    struct dib0070_state *state = fe->tuner_priv;
-    uint32_t ret;
+	struct dib0070_state *state = fe->tuner_priv;
+	uint32_t ret;
 
-    state->tune_state = CT_TUNER_START;
+	state->tune_state = CT_TUNER_START;
 
-    do {
-	ret = dib0070_tune_digital(fe, p);
-	if (ret != FE_CALLBACK_TIME_NEVER)
-	    msleep(ret/10);
-	else
-	    break;
-    } while (state->tune_state != CT_TUNER_STOP);
+	do {
+		ret = dib0070_tune_digital(fe, p);
+		if (ret != FE_CALLBACK_TIME_NEVER)
+			msleep(ret / 10);
+		else
+			break;
+	} while (state->tune_state != CT_TUNER_STOP);
 
-    return 0;
+	return 0;
 }
 
 static int dib0070_wakeup(struct dvb_frontend *fe)
 {
-	struct dib0070_state *st = fe->tuner_priv;
-	if (st->cfg->sleep)
-		st->cfg->sleep(fe, 0);
+	struct dib0070_state *state = fe->tuner_priv;
+	if (state->cfg->sleep)
+		state->cfg->sleep(fe, 0);
 	return 0;
 }
 
 static int dib0070_sleep(struct dvb_frontend *fe)
 {
-	struct dib0070_state *st = fe->tuner_priv;
-	if (st->cfg->sleep)
-		st->cfg->sleep(fe, 1);
+	struct dib0070_state *state = fe->tuner_priv;
+	if (state->cfg->sleep)
+		state->cfg->sleep(fe, 1);
 	return 0;
 }
 
-static const u16 dib0070_p1f_defaults[] =
-
-{
+static const u16 dib0070_p1f_defaults[] = {
 	7, 0x02,
-		0x0008,
-		0x0000,
-		0x0000,
-		0x0000,
-		0x0000,
-		0x0002,
-		0x0100,
+	0x0008,
+	0x0000,
+	0x0000,
+	0x0000,
+	0x0000,
+	0x0002,
+	0x0100,
 
 	3, 0x0d,
-		0x0d80,
-		0x0001,
-		0x0000,
+	0x0d80,
+	0x0001,
+	0x0000,
 
 	4, 0x11,
-		0x0000,
-		0x0103,
-		0x0000,
-		0x0000,
+	0x0000,
+	0x0103,
+	0x0000,
+	0x0000,
 
 	3, 0x16,
-		0x0004 | 0x0040,
-		0x0030,
-		0x07ff,
+	0x0004 | 0x0040,
+	0x0030,
+	0x07ff,
 
 	6, 0x1b,
-		0x4112,
-		0xff00,
-		0xc07f,
-		0x0000,
-		0x0180,
-		0x4000 | 0x0800 | 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001,
+	0x4112,
+	0xff00,
+	0xc07f,
+	0x0000,
+	0x0180,
+	0x4000 | 0x0800 | 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001,
 
 	0,
 };
 
 static u16 dib0070_read_wbd_offset(struct dib0070_state *state, u8 gain)
 {
-    u16 tuner_en = dib0070_read_reg(state, 0x20);
-    u16 offset;
-
-    dib0070_write_reg(state, 0x18, 0x07ff);
-    dib0070_write_reg(state, 0x20, 0x0800 | 0x4000 | 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001);
-    dib0070_write_reg(state, 0x0f, (1 << 14) | (2 << 12) | (gain << 9) | (1 << 8) | (1 << 7) | (0 << 0));
-    msleep(9);
-    offset = dib0070_read_reg(state, 0x19);
-    dib0070_write_reg(state, 0x20, tuner_en);
-    return offset;
+	u16 tuner_en = dib0070_read_reg(state, 0x20);
+	u16 offset;
+
+	dib0070_write_reg(state, 0x18, 0x07ff);
+	dib0070_write_reg(state, 0x20, 0x0800 | 0x4000 | 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001);
+	dib0070_write_reg(state, 0x0f, (1 << 14) | (2 << 12) | (gain << 9) | (1 << 8) | (1 << 7) | (0 << 0));
+	msleep(9);
+	offset = dib0070_read_reg(state, 0x19);
+	dib0070_write_reg(state, 0x20, tuner_en);
+	return offset;
 }
 
 static void dib0070_wbd_offset_calibration(struct dib0070_state *state)
 {
-    u8 gain;
-    for (gain = 6; gain < 8; gain++) {
-	state->wbd_offset_3_3[gain - 6] = ((dib0070_read_wbd_offset(state, gain) * 8 * 18 / 33 + 1) / 2);
-	dprintk( "Gain: %d, WBDOffset (3.3V) = %hd", gain, state->wbd_offset_3_3[gain-6]);
-    }
+	u8 gain;
+	for (gain = 6; gain < 8; gain++) {
+		state->wbd_offset_3_3[gain - 6] = ((dib0070_read_wbd_offset(state, gain) * 8 * 18 / 33 + 1) / 2);
+		dprintk("Gain: %d, WBDOffset (3.3V) = %hd", gain, state->wbd_offset_3_3[gain - 6]);
+	}
 }
 
 u16 dib0070_wbd_offset(struct dvb_frontend *fe)
 {
-	struct dib0070_state *st = fe->tuner_priv;
-	return st->wbd_offset_3_3[st->wbd_gain_current - 6];
+	struct dib0070_state *state = fe->tuner_priv;
+	const struct dib0070_wbd_gain_cfg *tmp = state->cfg->wbd_gain;
+	u32 freq = fe->dtv_property_cache.frequency / 1000;
+
+	if (tmp != NULL) {
+		while (freq / 1000 > tmp->freq)	/* find the right one */
+			tmp++;
+		state->wbd_gain_current = tmp->wbd_gain_val;
+	} else
+		state->wbd_gain_current = 6;
+
+	return state->wbd_offset_3_3[state->wbd_gain_current - 6];
 }
 
 EXPORT_SYMBOL(dib0070_wbd_offset);
+
 #define pgm_read_word(w) (*w)
 static int dib0070_reset(struct dvb_frontend *fe)
 {
-    struct dib0070_state *state = fe->tuner_priv;
+	struct dib0070_state *state = fe->tuner_priv;
 	u16 l, r, *n;
 
 	HARD_RESET(state);
 
-
 #ifndef FORCE_SBAND_TUNER
 	if ((dib0070_read_reg(state, 0x22) >> 9) & 0x1)
 		state->revision = (dib0070_read_reg(state, 0x1f) >> 8) & 0xff;
@@ -590,13 +605,13 @@ static int dib0070_reset(struct dvb_frontend *fe)
 #else
 #warning forcing SBAND
 #endif
-		state->revision = DIB0070S_P1A;
+	state->revision = DIB0070S_P1A;
 
 	/* P1F or not */
-	dprintk( "Revision: %x", state->revision);
+	dprintk("Revision: %x", state->revision);
 
 	if (state->revision == DIB0070_P1D) {
-		dprintk( "Error: this driver is not to be used meant for P1D or earlier");
+		dprintk("Error: this driver is not to be used meant for P1D or earlier");
 		return -EINVAL;
 	}
 
@@ -605,7 +620,7 @@ static int dib0070_reset(struct dvb_frontend *fe)
 	while (l) {
 		r = pgm_read_word(n++);
 		do {
-			dib0070_write_reg(state, (u8)r, pgm_read_word(n++));
+			dib0070_write_reg(state, (u8) r, pgm_read_word(n++));
 			r++;
 		} while (--l);
 		l = pgm_read_word(n++);
@@ -618,7 +633,6 @@ static int dib0070_reset(struct dvb_frontend *fe)
 	else
 		r = 2;
 
-
 	r |= state->cfg->osc_buffer_state << 3;
 
 	dib0070_write_reg(state, 0x10, r);
@@ -629,19 +643,18 @@ static int dib0070_reset(struct dvb_frontend *fe)
 		dib0070_write_reg(state, 0x02, r | (1 << 5));
 	}
 
-    if (state->revision == DIB0070S_P1A)
-	dib0070_set_ctrl_lo5(fe, 2, 4, 3, 0);
-    else
+	if (state->revision == DIB0070S_P1A)
+		dib0070_set_ctrl_lo5(fe, 2, 4, 3, 0);
+	else
 		dib0070_set_ctrl_lo5(fe, 5, 4, state->cfg->charge_pump, state->cfg->enable_third_order_filter);
 
 	dib0070_write_reg(state, 0x01, (54 << 9) | 0xc8);
 
-    dib0070_wbd_offset_calibration(state);
+	dib0070_wbd_offset_calibration(state);
 
-    return 0;
+	return 0;
 }
 
-
 static int dib0070_release(struct dvb_frontend *fe)
 {
 	kfree(fe->tuner_priv);
@@ -651,22 +664,22 @@ static int dib0070_release(struct dvb_frontend *fe)
 
 static const struct dvb_tuner_ops dib0070_ops = {
 	.info = {
-		.name           = "DiBcom DiB0070",
-		.frequency_min  =  45000000,
-		.frequency_max  = 860000000,
-		.frequency_step =      1000,
-	},
-	.release       = dib0070_release,
-
-	.init          = dib0070_wakeup,
-	.sleep         = dib0070_sleep,
-	.set_params    = dib0070_tune,
-
-//	.get_frequency = dib0070_get_frequency,
-//	.get_bandwidth = dib0070_get_bandwidth
+		 .name = "DiBcom DiB0070",
+		 .frequency_min = 45000000,
+		 .frequency_max = 860000000,
+		 .frequency_step = 1000,
+		 },
+	.release = dib0070_release,
+
+	.init = dib0070_wakeup,
+	.sleep = dib0070_sleep,
+	.set_params = dib0070_tune,
+
+//      .get_frequency = dib0070_get_frequency,
+//      .get_bandwidth = dib0070_get_bandwidth
 };
 
-struct dvb_frontend * dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg)
+struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg)
 {
 	struct dib0070_state *state = kzalloc(sizeof(struct dib0070_state), GFP_KERNEL);
 	if (state == NULL)
@@ -674,7 +687,7 @@ struct dvb_frontend * dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter
 
 	state->cfg = cfg;
 	state->i2c = i2c;
-	state->fe  = fe;
+	state->fe = fe;
 	fe->tuner_priv = state;
 
 	if (dib0070_reset(fe) != 0)
@@ -686,11 +699,12 @@ struct dvb_frontend * dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter
 	fe->tuner_priv = state;
 	return fe;
 
-free_mem:
+ free_mem:
 	kfree(state);
 	fe->tuner_priv = NULL;
 	return NULL;
 }
+
 EXPORT_SYMBOL(dib0070_attach);
 
 MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>");
diff --git a/drivers/media/dvb/frontends/dib0070.h b/drivers/media/dvb/frontends/dib0070.h
index 8c1c51cfaff..8a2e1e710ad 100644
--- a/drivers/media/dvb/frontends/dib0070.h
+++ b/drivers/media/dvb/frontends/dib0070.h
@@ -16,8 +16,8 @@ struct i2c_adapter;
 #define DEFAULT_DIB0070_I2C_ADDRESS 0x60
 
 struct dib0070_wbd_gain_cfg {
-    u16 freq;
-    u16 wbd_gain_val;
+	u16 freq;
+	u16 wbd_gain_val;
 };
 
 struct dib0070_config {
@@ -31,32 +31,28 @@ struct dib0070_config {
 	int freq_offset_khz_uhf;
 	int freq_offset_khz_vhf;
 
-	u8 osc_buffer_state; /* 0= normal, 1= tri-state */
-	u32  clock_khz;
-	u8 clock_pad_drive; /* (Drive + 1) * 2mA */
+	u8 osc_buffer_state;	/* 0= normal, 1= tri-state */
+	u32 clock_khz;
+	u8 clock_pad_drive;	/* (Drive + 1) * 2mA */
 
-	u8 invert_iq; /* invert Q - in case I or Q is inverted on the board */
+	u8 invert_iq;		/* invert Q - in case I or Q is inverted on the board */
 
-	u8 force_crystal_mode; /* if == 0 -> decision is made in the driver default: <24 -> 2, >=24 -> 1 */
+	u8 force_crystal_mode;	/* if == 0 -> decision is made in the driver default: <24 -> 2, >=24 -> 1 */
 
 	u8 flip_chip;
-    u8 enable_third_order_filter;
-    u8 charge_pump;
+	u8 enable_third_order_filter;
+	u8 charge_pump;
 
-	const struct dib0070_wbd_gain_cfg * wbd_gain;
+	const struct dib0070_wbd_gain_cfg *wbd_gain;
 
-    u8 vga_filter;
+	u8 vga_filter;
 };
 
 #if defined(CONFIG_DVB_TUNER_DIB0070) || (defined(CONFIG_DVB_TUNER_DIB0070_MODULE) && defined(MODULE))
-extern struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe,
-					   struct i2c_adapter *i2c,
-					   struct dib0070_config *cfg);
+extern struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg);
 extern u16 dib0070_wbd_offset(struct dvb_frontend *);
 #else
-static inline struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe,
-						  struct i2c_adapter *i2c,
-						  struct dib0070_config *cfg)
+static inline struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg)
 {
 	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
 	return NULL;
@@ -68,5 +64,6 @@ static inline u16 dib0070_wbd_offset(struct dvb_frontend *fe)
 	return -ENODEV;
 }
 #endif
+extern void dib0070_ctrl_agc_filter(struct dvb_frontend *, u8 open);
 
 #endif
-- 
cgit v1.2.3


From 77e2c0f5d471e2b14140f0695a1b6a718f318dd7 Mon Sep 17 00:00:00 2001
From: Patrick Boettcher <pboettcher@dibcom.fr>
Date: Mon, 17 Aug 2009 07:01:10 -0300
Subject: V4L/DVB (12900): DiB8000: added support for DiBcom ISDB-T/ISDB-Tsb
 demodulator DiB8000

This commit adds support for the DiB8000 ISDB-T demodulator made by DiBcom.

Signed-off-by: Olivier Grenie <Olivier.Grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/dvb-usb/Kconfig            |    3 +-
 drivers/media/dvb/frontends/Kconfig          |    8 +
 drivers/media/dvb/frontends/Makefile         |    1 +
 drivers/media/dvb/frontends/dib8000.c        | 2279 ++++++++++++++++++++++++++
 drivers/media/dvb/frontends/dib8000.h        |   79 +
 drivers/media/dvb/frontends/dibx000_common.c |   95 +-
 drivers/media/dvb/frontends/dibx000_common.h |   31 +-
 7 files changed, 2449 insertions(+), 47 deletions(-)
 create mode 100644 drivers/media/dvb/frontends/dib8000.c
 create mode 100644 drivers/media/dvb/frontends/dib8000.h

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index 8b8bc04ee98..c5ec9a5f3b3 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -71,6 +71,7 @@ config DVB_USB_DIB0700
 	depends on DVB_USB
 	select DVB_DIB7000P if !DVB_FE_CUSTOMISE
 	select DVB_DIB7000M if !DVB_FE_CUSTOMISE
+	select DVB_DIB8000 if !DVB_FE_CUSTOMISE
 	select DVB_DIB3000MC if !DVB_FE_CUSTOMISE
 	select DVB_S5H1411 if !DVB_FE_CUSTOMISE
 	select DVB_LGDT3305 if !DVB_FE_CUSTOMISE
@@ -87,7 +88,7 @@ config DVB_USB_DIB0700
 	  Avermedia and other big and small companies.
 
 	  For an up-to-date list of devices supported by this driver, have a look
-	  on the Linux-DVB Wiki at www.linuxtv.org.
+	  on the LinuxTV Wiki at www.linuxtv.org.
 
 	  Say Y if you own such a device and want to use it. You should build it as
 	  a module.
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index b794e860b4e..d7c4837fa71 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -484,6 +484,14 @@ config DVB_S921
 	  AN ISDB-T DQPSK, QPSK, 16QAM and 64QAM 1seg tuner module.
 	  Say Y when you want to support this frontend.
 
+config DVB_DIB8000
+	tristate "DiBcom 8000MB/MC"
+	depends on DVB_CORE && I2C
+	default m if DVB_FE_CUSTOMISE
+	help
+	  A driver for DiBcom's DiB8000 ISDB-T/ISDB-Tsb demodulator.
+	  Say Y when you want to support this frontend.
+
 comment "Digital terrestrial only tuners/PLL"
 	depends on DVB_CORE
 
diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile
index 3b49d37ab5f..3523767e7a7 100644
--- a/drivers/media/dvb/frontends/Makefile
+++ b/drivers/media/dvb/frontends/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_DVB_DIB3000MB) += dib3000mb.o
 obj-$(CONFIG_DVB_DIB3000MC) += dib3000mc.o dibx000_common.o
 obj-$(CONFIG_DVB_DIB7000M) += dib7000m.o dibx000_common.o
 obj-$(CONFIG_DVB_DIB7000P) += dib7000p.o dibx000_common.o
+obj-$(CONFIG_DVB_DIB8000) += dib8000.o dibx000_common.o
 obj-$(CONFIG_DVB_MT312) += mt312.o
 obj-$(CONFIG_DVB_VES1820) += ves1820.o
 obj-$(CONFIG_DVB_VES1X93) += ves1x93.o
diff --git a/drivers/media/dvb/frontends/dib8000.c b/drivers/media/dvb/frontends/dib8000.c
new file mode 100644
index 00000000000..99ee6b09ce1
--- /dev/null
+++ b/drivers/media/dvb/frontends/dib8000.c
@@ -0,0 +1,2279 @@
+/*
+ * Linux-DVB Driver for DiBcom's DiB8000 chip (ISDB-T).
+ *
+ * Copyright (C) 2009 DiBcom (http://www.dibcom.fr/)
+ *
+ * This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License as
+ *  published by the Free Software Foundation, version 2.
+ */
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include "dvb_math.h"
+
+#include "dvb_frontend.h"
+
+#include "dib8000.h"
+
+#define LAYER_ALL -1
+#define LAYER_A   1
+#define LAYER_B   2
+#define LAYER_C   3
+
+#define FE_CALLBACK_TIME_NEVER 0xffffffff
+
+static int debug = 0;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
+
+#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB8000: "); printk(args); printk("\n"); } } while (0)
+
+enum frontend_tune_state {
+	CT_AGC_START = 20,
+	CT_AGC_STEP_0,
+	CT_AGC_STEP_1,
+	CT_AGC_STEP_2,
+	CT_AGC_STEP_3,
+	CT_AGC_STEP_4,
+	CT_AGC_STOP,
+
+	CT_DEMOD_START = 30,
+};
+
+#define FE_STATUS_TUNE_FAILED 0
+
+struct i2c_device {
+	struct i2c_adapter *adap;
+	u8 addr;
+};
+
+struct dib8000_state {
+	struct dvb_frontend fe;
+	struct dib8000_config cfg;
+
+	struct i2c_device i2c;
+
+	struct dibx000_i2c_master i2c_master;
+
+	u16 wbd_ref;
+
+	u8 current_band;
+	u32 current_bandwidth;
+	struct dibx000_agc_config *current_agc;
+	u32 timf;
+	u32 timf_default;
+
+	u8 div_force_off:1;
+	u8 div_state:1;
+	u16 div_sync_wait;
+
+	u8 agc_state;
+	u8 differential_constellation;
+	u8 diversity_onoff;
+
+	s16 ber_monitored_layer;
+	u16 gpio_dir;
+	u16 gpio_val;
+
+	u16 revision;
+	u8 isdbt_cfg_loaded;
+	enum frontend_tune_state tune_state;
+	u32 status;
+};
+
+enum dib8000_power_mode {
+	DIB8000M_POWER_ALL = 0,
+	DIB8000M_POWER_INTERFACE_ONLY,
+};
+
+static u16 dib8000_i2c_read16(struct i2c_device *i2c, u16 reg)
+{
+	u8 wb[2] = { reg >> 8, reg & 0xff };
+	u8 rb[2];
+	struct i2c_msg msg[2] = {
+		{.addr = i2c->addr >> 1,.flags = 0,.buf = wb,.len = 2},
+		{.addr = i2c->addr >> 1,.flags = I2C_M_RD,.buf = rb,.len = 2},
+	};
+
+	if (i2c_transfer(i2c->adap, msg, 2) != 2)
+		dprintk("i2c read error on %d", reg);
+
+	return (rb[0] << 8) | rb[1];
+}
+
+static u16 dib8000_read_word(struct dib8000_state *state, u16 reg)
+{
+	return dib8000_i2c_read16(&state->i2c, reg);
+}
+
+static u32 dib8000_read32(struct dib8000_state *state, u16 reg)
+{
+	u16 rw[2];
+
+	rw[0] = dib8000_read_word(state, reg + 0);
+	rw[1] = dib8000_read_word(state, reg + 1);
+
+	return ((rw[0] << 16) | (rw[1]));
+}
+
+static int dib8000_i2c_write16(struct i2c_device *i2c, u16 reg, u16 val)
+{
+	u8 b[4] = {
+		(reg >> 8) & 0xff, reg & 0xff,
+		(val >> 8) & 0xff, val & 0xff,
+	};
+	struct i2c_msg msg = {
+		.addr = i2c->addr >> 1,.flags = 0,.buf = b,.len = 4
+	};
+	return i2c_transfer(i2c->adap, &msg, 1) != 1 ? -EREMOTEIO : 0;
+}
+
+static int dib8000_write_word(struct dib8000_state *state, u16 reg, u16 val)
+{
+	return dib8000_i2c_write16(&state->i2c, reg, val);
+}
+
+const int16_t coeff_2k_sb_1seg_dqpsk[8] = {
+	(769 << 5) | 0x0a, (745 << 5) | 0x03, (595 << 5) | 0x0d, (769 << 5) | 0x0a, (920 << 5) | 0x09, (784 << 5) | 0x02, (519 << 5) | 0x0c,
+	    (920 << 5) | 0x09
+};
+
+const int16_t coeff_2k_sb_1seg[8] = {
+	(692 << 5) | 0x0b, (683 << 5) | 0x01, (519 << 5) | 0x09, (692 << 5) | 0x0b, 0 | 0x1f, 0 | 0x1f, 0 | 0x1f, 0 | 0x1f
+};
+
+const int16_t coeff_2k_sb_3seg_0dqpsk_1dqpsk[8] = {
+	(832 << 5) | 0x10, (912 << 5) | 0x05, (900 << 5) | 0x12, (832 << 5) | 0x10, (-931 << 5) | 0x0f, (912 << 5) | 0x04, (807 << 5) | 0x11,
+	    (-931 << 5) | 0x0f
+};
+
+const int16_t coeff_2k_sb_3seg_0dqpsk[8] = {
+	(622 << 5) | 0x0c, (941 << 5) | 0x04, (796 << 5) | 0x10, (622 << 5) | 0x0c, (982 << 5) | 0x0c, (519 << 5) | 0x02, (572 << 5) | 0x0e,
+	    (982 << 5) | 0x0c
+};
+
+const int16_t coeff_2k_sb_3seg_1dqpsk[8] = {
+	(699 << 5) | 0x14, (607 << 5) | 0x04, (944 << 5) | 0x13, (699 << 5) | 0x14, (-720 << 5) | 0x0d, (640 << 5) | 0x03, (866 << 5) | 0x12,
+	    (-720 << 5) | 0x0d
+};
+
+const int16_t coeff_2k_sb_3seg[8] = {
+	(664 << 5) | 0x0c, (925 << 5) | 0x03, (937 << 5) | 0x10, (664 << 5) | 0x0c, (-610 << 5) | 0x0a, (697 << 5) | 0x01, (836 << 5) | 0x0e,
+	    (-610 << 5) | 0x0a
+};
+
+const int16_t coeff_4k_sb_1seg_dqpsk[8] = {
+	(-955 << 5) | 0x0e, (687 << 5) | 0x04, (818 << 5) | 0x10, (-955 << 5) | 0x0e, (-922 << 5) | 0x0d, (750 << 5) | 0x03, (665 << 5) | 0x0f,
+	    (-922 << 5) | 0x0d
+};
+
+const int16_t coeff_4k_sb_1seg[8] = {
+	(638 << 5) | 0x0d, (683 << 5) | 0x02, (638 << 5) | 0x0d, (638 << 5) | 0x0d, (-655 << 5) | 0x0a, (517 << 5) | 0x00, (698 << 5) | 0x0d,
+	    (-655 << 5) | 0x0a
+};
+
+const int16_t coeff_4k_sb_3seg_0dqpsk_1dqpsk[8] = {
+	(-707 << 5) | 0x14, (910 << 5) | 0x06, (889 << 5) | 0x16, (-707 << 5) | 0x14, (-958 << 5) | 0x13, (993 << 5) | 0x05, (523 << 5) | 0x14,
+	    (-958 << 5) | 0x13
+};
+
+const int16_t coeff_4k_sb_3seg_0dqpsk[8] = {
+	(-723 << 5) | 0x13, (910 << 5) | 0x05, (777 << 5) | 0x14, (-723 << 5) | 0x13, (-568 << 5) | 0x0f, (547 << 5) | 0x03, (696 << 5) | 0x12,
+	    (-568 << 5) | 0x0f
+};
+
+const int16_t coeff_4k_sb_3seg_1dqpsk[8] = {
+	(-940 << 5) | 0x15, (607 << 5) | 0x05, (915 << 5) | 0x16, (-940 << 5) | 0x15, (-848 << 5) | 0x13, (683 << 5) | 0x04, (543 << 5) | 0x14,
+	    (-848 << 5) | 0x13
+};
+
+const int16_t coeff_4k_sb_3seg[8] = {
+	(612 << 5) | 0x12, (910 << 5) | 0x04, (864 << 5) | 0x14, (612 << 5) | 0x12, (-869 << 5) | 0x13, (683 << 5) | 0x02, (869 << 5) | 0x12,
+	    (-869 << 5) | 0x13
+};
+
+const int16_t coeff_8k_sb_1seg_dqpsk[8] = {
+	(-835 << 5) | 0x12, (684 << 5) | 0x05, (735 << 5) | 0x14, (-835 << 5) | 0x12, (-598 << 5) | 0x10, (781 << 5) | 0x04, (739 << 5) | 0x13,
+	    (-598 << 5) | 0x10
+};
+
+const int16_t coeff_8k_sb_1seg[8] = {
+	(673 << 5) | 0x0f, (683 << 5) | 0x03, (808 << 5) | 0x12, (673 << 5) | 0x0f, (585 << 5) | 0x0f, (512 << 5) | 0x01, (780 << 5) | 0x0f,
+	    (585 << 5) | 0x0f
+};
+
+const int16_t coeff_8k_sb_3seg_0dqpsk_1dqpsk[8] = {
+	(863 << 5) | 0x17, (930 << 5) | 0x07, (878 << 5) | 0x19, (863 << 5) | 0x17, (0 << 5) | 0x14, (521 << 5) | 0x05, (980 << 5) | 0x18,
+	    (0 << 5) | 0x14
+};
+
+const int16_t coeff_8k_sb_3seg_0dqpsk[8] = {
+	(-924 << 5) | 0x17, (910 << 5) | 0x06, (774 << 5) | 0x17, (-924 << 5) | 0x17, (-877 << 5) | 0x15, (565 << 5) | 0x04, (553 << 5) | 0x15,
+	    (-877 << 5) | 0x15
+};
+
+const int16_t coeff_8k_sb_3seg_1dqpsk[8] = {
+	(-921 << 5) | 0x19, (607 << 5) | 0x06, (881 << 5) | 0x19, (-921 << 5) | 0x19, (-921 << 5) | 0x14, (713 << 5) | 0x05, (1018 << 5) | 0x18,
+	    (-921 << 5) | 0x14
+};
+
+const int16_t coeff_8k_sb_3seg[8] = {
+	(514 << 5) | 0x14, (910 << 5) | 0x05, (861 << 5) | 0x17, (514 << 5) | 0x14, (690 << 5) | 0x14, (683 << 5) | 0x03, (662 << 5) | 0x15,
+	    (690 << 5) | 0x14
+};
+
+const int16_t ana_fe_coeff_3seg[24] = {
+	81, 80, 78, 74, 68, 61, 54, 45, 37, 28, 19, 11, 4, 1022, 1017, 1013, 1010, 1008, 1008, 1008, 1008, 1010, 1014, 1017
+};
+
+const int16_t ana_fe_coeff_1seg[24] = {
+	249, 226, 164, 82, 5, 981, 970, 988, 1018, 20, 31, 26, 8, 1012, 1000, 1018, 1012, 8, 15, 14, 9, 3, 1017, 1003
+};
+
+const int16_t ana_fe_coeff_13seg[24] = {
+	396, 305, 105, -51, -77, -12, 41, 31, -11, -30, -11, 14, 15, -2, -13, -7, 5, 8, 1, -6, -7, -3, 0, 1
+};
+
+static u16 fft_to_mode(struct dib8000_state *state)
+{
+	u16 mode;
+	switch (state->fe.dtv_property_cache.transmission_mode) {
+	case TRANSMISSION_MODE_2K:
+		mode = 1;
+		break;
+	case TRANSMISSION_MODE_4K:
+		mode = 2;
+		break;
+	default:
+	case TRANSMISSION_MODE_AUTO:
+	case TRANSMISSION_MODE_8K:
+		mode = 3;
+		break;
+	}
+	return mode;
+}
+
+static void dib8000_set_acquisition_mode(struct dib8000_state *state)
+{
+	u16 nud = dib8000_read_word(state, 298);
+	nud |= (1 << 3) | (1 << 0);
+	dprintk("acquisition mode activated");
+	dib8000_write_word(state, 298, nud);
+}
+
+static int dib8000_set_output_mode(struct dib8000_state *state, int mode)
+{
+	u16 outreg, fifo_threshold, smo_mode, sram = 0x0205;	/* by default SDRAM deintlv is enabled */
+
+	outreg = 0;
+	fifo_threshold = 1792;
+	smo_mode = (dib8000_read_word(state, 299) & 0x0050) | (1 << 1);
+
+	dprintk("-I-  Setting output mode for demod %p to %d", &state->fe, mode);
+
+	switch (mode) {
+	case OUTMODE_MPEG2_PAR_GATED_CLK:	// STBs with parallel gated clock
+		outreg = (1 << 10);	/* 0x0400 */
+		break;
+	case OUTMODE_MPEG2_PAR_CONT_CLK:	// STBs with parallel continues clock
+		outreg = (1 << 10) | (1 << 6);	/* 0x0440 */
+		break;
+	case OUTMODE_MPEG2_SERIAL:	// STBs with serial input
+		outreg = (1 << 10) | (2 << 6) | (0 << 1);	/* 0x0482 */
+		break;
+	case OUTMODE_DIVERSITY:
+		if (state->cfg.hostbus_diversity) {
+			outreg = (1 << 10) | (4 << 6);	/* 0x0500 */
+			sram &= 0xfdff;
+		} else
+			sram |= 0x0c00;
+		break;
+	case OUTMODE_MPEG2_FIFO:	// e.g. USB feeding
+		smo_mode |= (3 << 1);
+		fifo_threshold = 512;
+		outreg = (1 << 10) | (5 << 6);
+		break;
+	case OUTMODE_HIGH_Z:	// disable
+		outreg = 0;
+		break;
+
+	case OUTMODE_ANALOG_ADC:
+		outreg = (1 << 10) | (3 << 6);
+		dib8000_set_acquisition_mode(state);
+		break;
+
+	default:
+		dprintk("Unhandled output_mode passed to be set for demod %p", &state->fe);
+		return -EINVAL;
+	}
+
+	if (state->cfg.output_mpeg2_in_188_bytes)
+		smo_mode |= (1 << 5);
+
+	dib8000_write_word(state, 299, smo_mode);
+	dib8000_write_word(state, 300, fifo_threshold);	/* synchronous fread */
+	dib8000_write_word(state, 1286, outreg);
+	dib8000_write_word(state, 1291, sram);
+
+	return 0;
+}
+
+static int dib8000_set_diversity_in(struct dvb_frontend *fe, int onoff)
+{
+	struct dib8000_state *state = fe->demodulator_priv;
+	u16 sync_wait = dib8000_read_word(state, 273) & 0xfff0;
+
+	if (!state->differential_constellation) {
+		dib8000_write_word(state, 272, 1 << 9);	//dvsy_off_lmod4 = 1
+		dib8000_write_word(state, 273, sync_wait | (1 << 2) | 2);	// sync_enable = 1; comb_mode = 2
+	} else {
+		dib8000_write_word(state, 272, 0);	//dvsy_off_lmod4 = 0
+		dib8000_write_word(state, 273, sync_wait);	// sync_enable = 0; comb_mode = 0
+	}
+	state->diversity_onoff = onoff;
+
+	switch (onoff) {
+	case 0:		/* only use the internal way - not the diversity input */
+		dib8000_write_word(state, 270, 1);
+		dib8000_write_word(state, 271, 0);
+		break;
+	case 1:		/* both ways */
+		dib8000_write_word(state, 270, 6);
+		dib8000_write_word(state, 271, 6);
+		break;
+	case 2:		/* only the diversity input */
+		dib8000_write_word(state, 270, 0);
+		dib8000_write_word(state, 271, 1);
+		break;
+	}
+	return 0;
+}
+
+static void dib8000_set_power_mode(struct dib8000_state *state, enum dib8000_power_mode mode)
+{
+	/* by default everything is going to be powered off */
+	u16 reg_774 = 0x3fff, reg_775 = 0xffff, reg_776 = 0xffff,
+	    reg_900 = (dib8000_read_word(state, 900) & 0xfffc) | 0x3, reg_1280 = (dib8000_read_word(state, 1280) & 0x00ff) | 0xff00;
+
+	/* now, depending on the requested mode, we power on */
+	switch (mode) {
+		/* power up everything in the demod */
+	case DIB8000M_POWER_ALL:
+		reg_774 = 0x0000;
+		reg_775 = 0x0000;
+		reg_776 = 0x0000;
+		reg_900 &= 0xfffc;
+		reg_1280 &= 0x00ff;
+		break;
+	case DIB8000M_POWER_INTERFACE_ONLY:
+		reg_1280 &= 0x00ff;
+		break;
+	}
+
+	dprintk("powermode : 774 : %x ; 775 : %x; 776 : %x ; 900 : %x; 1280 : %x", reg_774, reg_775, reg_776, reg_900, reg_1280);
+	dib8000_write_word(state, 774, reg_774);
+	dib8000_write_word(state, 775, reg_775);
+	dib8000_write_word(state, 776, reg_776);
+	dib8000_write_word(state, 900, reg_900);
+	dib8000_write_word(state, 1280, reg_1280);
+}
+
+static int dib8000_set_adc_state(struct dib8000_state *state, enum dibx000_adc_states no)
+{
+	int ret = 0;
+	u16 reg_907 = dib8000_read_word(state, 907), reg_908 = dib8000_read_word(state, 908);
+
+	switch (no) {
+	case DIBX000_SLOW_ADC_ON:
+		reg_908 |= (1 << 1) | (1 << 0);
+		ret |= dib8000_write_word(state, 908, reg_908);
+		reg_908 &= ~(1 << 1);
+		break;
+
+	case DIBX000_SLOW_ADC_OFF:
+		reg_908 |= (1 << 1) | (1 << 0);
+		break;
+
+	case DIBX000_ADC_ON:
+		reg_907 &= 0x0fff;
+		reg_908 &= 0x0003;
+		break;
+
+	case DIBX000_ADC_OFF:	// leave the VBG voltage on
+		reg_907 |= (1 << 14) | (1 << 13) | (1 << 12);
+		reg_908 |= (1 << 5) | (1 << 4) | (1 << 3) | (1 << 2);
+		break;
+
+	case DIBX000_VBG_ENABLE:
+		reg_907 &= ~(1 << 15);
+		break;
+
+	case DIBX000_VBG_DISABLE:
+		reg_907 |= (1 << 15);
+		break;
+
+	default:
+		break;
+	}
+
+	ret |= dib8000_write_word(state, 907, reg_907);
+	ret |= dib8000_write_word(state, 908, reg_908);
+
+	return ret;
+}
+
+static int dib8000_set_bandwidth(struct dib8000_state *state, u32 bw)
+{
+	u32 timf;
+
+	if (bw == 0)
+		bw = 6000;
+
+	if (state->timf == 0) {
+		dprintk("using default timf");
+		timf = state->timf_default;
+	} else {
+		dprintk("using updated timf");
+		timf = state->timf;
+	}
+
+	dib8000_write_word(state, 29, (u16) ((timf >> 16) & 0xffff));
+	dib8000_write_word(state, 30, (u16) ((timf) & 0xffff));
+
+	return 0;
+}
+
+static int dib8000_sad_calib(struct dib8000_state *state)
+{
+/* internal */
+	dib8000_write_word(state, 923, (0 << 1) | (0 << 0));
+	dib8000_write_word(state, 924, 776);	// 0.625*3.3 / 4096
+
+	/* do the calibration */
+	dib8000_write_word(state, 923, (1 << 0));
+	dib8000_write_word(state, 923, (0 << 0));
+
+	msleep(1);
+	return 0;
+}
+
+int dib8000_set_wbd_ref(struct dvb_frontend *fe, u16 value)
+{
+	struct dib8000_state *state = fe->demodulator_priv;
+	if (value > 4095)
+		value = 4095;
+	state->wbd_ref = value;
+	return dib8000_write_word(state, 106, value);
+}
+
+EXPORT_SYMBOL(dib8000_set_wbd_ref);
+static void dib8000_reset_pll_common(struct dib8000_state *state, const struct dibx000_bandwidth_config *bw)
+{
+	dprintk("ifreq: %d %x, inversion: %d", bw->ifreq, bw->ifreq, bw->ifreq >> 25);
+	dib8000_write_word(state, 23, (u16) (((bw->internal * 1000) >> 16) & 0xffff));	/* P_sec_len */
+	dib8000_write_word(state, 24, (u16) ((bw->internal * 1000) & 0xffff));
+	dib8000_write_word(state, 27, (u16) ((bw->ifreq >> 16) & 0x01ff));
+	dib8000_write_word(state, 28, (u16) (bw->ifreq & 0xffff));
+	dib8000_write_word(state, 26, (u16) ((bw->ifreq >> 25) & 0x0003));
+
+	dib8000_write_word(state, 922, bw->sad_cfg);
+}
+
+static void dib8000_reset_pll(struct dib8000_state *state)
+{
+	const struct dibx000_bandwidth_config *pll = state->cfg.pll;
+	u16 clk_cfg1;
+
+	// clk_cfg0
+	dib8000_write_word(state, 901, (pll->pll_prediv << 8) | (pll->pll_ratio << 0));
+
+	// clk_cfg1
+	clk_cfg1 = (1 << 10) | (0 << 9) | (pll->IO_CLK_en_core << 8) |
+	    (pll->bypclk_div << 5) | (pll->enable_refdiv << 4) | (1 << 3) | (pll->pll_range << 1) | (pll->pll_reset << 0);
+
+	dib8000_write_word(state, 902, clk_cfg1);
+	clk_cfg1 = (clk_cfg1 & 0xfff7) | (pll->pll_bypass << 3);
+	dib8000_write_word(state, 902, clk_cfg1);
+
+	dprintk("clk_cfg1: 0x%04x", clk_cfg1);	/* 0x507 1 0 1 000 0 0 11 1 */
+
+	/* smpl_cfg: P_refclksel=2, P_ensmplsel=1 nodivsmpl=1 */
+	if (state->cfg.pll->ADClkSrc == 0)
+		dib8000_write_word(state, 904, (0 << 15) | (0 << 12) | (0 << 10) | (pll->modulo << 8) | (pll->ADClkSrc << 7) | (0 << 1));
+	else if (state->cfg.refclksel != 0)
+		dib8000_write_word(state, 904,
+				   (0 << 15) | (1 << 12) | ((state->cfg.refclksel & 0x3) << 10) | (pll->modulo << 8) | (pll->
+															ADClkSrc << 7) | (0 << 1));
+	else
+		dib8000_write_word(state, 904, (0 << 15) | (1 << 12) | (3 << 10) | (pll->modulo << 8) | (pll->ADClkSrc << 7) | (0 << 1));
+
+	dib8000_reset_pll_common(state, pll);
+}
+
+static int dib8000_reset_gpio(struct dib8000_state *st)
+{
+	/* reset the GPIOs */
+	dib8000_write_word(st, 1029, st->cfg.gpio_dir);
+	dib8000_write_word(st, 1030, st->cfg.gpio_val);
+
+	/* TODO 782 is P_gpio_od */
+
+	dib8000_write_word(st, 1032, st->cfg.gpio_pwm_pos);
+
+	dib8000_write_word(st, 1037, st->cfg.pwm_freq_div);
+	return 0;
+}
+
+static int dib8000_cfg_gpio(struct dib8000_state *st, u8 num, u8 dir, u8 val)
+{
+	st->cfg.gpio_dir = dib8000_read_word(st, 1029);
+	st->cfg.gpio_dir &= ~(1 << num);	/* reset the direction bit */
+	st->cfg.gpio_dir |= (dir & 0x1) << num;	/* set the new direction */
+	dib8000_write_word(st, 1029, st->cfg.gpio_dir);
+
+	st->cfg.gpio_val = dib8000_read_word(st, 1030);
+	st->cfg.gpio_val &= ~(1 << num);	/* reset the direction bit */
+	st->cfg.gpio_val |= (val & 0x01) << num;	/* set the new value */
+	dib8000_write_word(st, 1030, st->cfg.gpio_val);
+
+	dprintk("gpio dir: %x: gpio val: %x", st->cfg.gpio_dir, st->cfg.gpio_val);
+
+	return 0;
+}
+
+int dib8000_set_gpio(struct dvb_frontend *fe, u8 num, u8 dir, u8 val)
+{
+	struct dib8000_state *state = fe->demodulator_priv;
+	return dib8000_cfg_gpio(state, num, dir, val);
+}
+
+EXPORT_SYMBOL(dib8000_set_gpio);
+static const u16 dib8000_defaults[] = {
+	/* auto search configuration - lock0 by default waiting
+	 * for cpil_lock; lock1 cpil_lock; lock2 tmcc_sync_lock */
+	3, 7,
+	0x0004,
+	0x0400,
+	0x0814,
+
+	12, 11,
+	0x001b,
+	0x7740,
+	0x005b,
+	0x8d80,
+	0x01c9,
+	0xc380,
+	0x0000,
+	0x0080,
+	0x0000,
+	0x0090,
+	0x0001,
+	0xd4c0,
+
+	/*1, 32,
+	   0x6680 // P_corm_thres Lock algorithms configuration */
+
+	11, 80,			/* set ADC level to -16 */
+	(1 << 13) - 825 - 117,
+	(1 << 13) - 837 - 117,
+	(1 << 13) - 811 - 117,
+	(1 << 13) - 766 - 117,
+	(1 << 13) - 737 - 117,
+	(1 << 13) - 693 - 117,
+	(1 << 13) - 648 - 117,
+	(1 << 13) - 619 - 117,
+	(1 << 13) - 575 - 117,
+	(1 << 13) - 531 - 117,
+	(1 << 13) - 501 - 117,
+
+	4, 108,
+	0,
+	0,
+	0,
+	0,
+
+	1, 175,
+	0x0410,
+	1, 179,
+	8192,			// P_fft_nb_to_cut
+
+	6, 181,
+	0x2800,			// P_coff_corthres_ ( 2k 4k 8k ) 0x2800
+	0x2800,
+	0x2800,
+	0x2800,			// P_coff_cpilthres_ ( 2k 4k 8k ) 0x2800
+	0x2800,
+	0x2800,
+
+	2, 193,
+	0x0666,			// P_pha3_thres
+	0x0000,			// P_cti_use_cpe, P_cti_use_prog
+
+	2, 205,
+	0x200f,			// P_cspu_regul, P_cspu_win_cut
+	0x000f,			// P_des_shift_work
+
+	5, 215,
+	0x023d,			// P_adp_regul_cnt
+	0x00a4,			// P_adp_noise_cnt
+	0x00a4,			// P_adp_regul_ext
+	0x7ff0,			// P_adp_noise_ext
+	0x3ccc,			// P_adp_fil
+
+	1, 230,
+	0x0000,			// P_2d_byp_ti_num
+
+	1, 263,
+	0x800,			//P_equal_thres_wgn
+
+	1, 268,
+	(2 << 9) | 39,		// P_equal_ctrl_synchro, P_equal_speedmode
+
+	1, 270,
+	0x0001,			// P_div_lock0_wait
+	1, 285,
+	0x0020,			//p_fec_
+	1, 299,
+	0x0062,			// P_smo_mode, P_smo_rs_discard, P_smo_fifo_flush, P_smo_pid_parse, P_smo_error_discard
+
+	1, 338,
+	(1 << 12) |		// P_ctrl_corm_thres4pre_freq_inh=1
+	    (1 << 10) |		// P_ctrl_pre_freq_mode_sat=1
+	    (0 << 9) |		// P_ctrl_pre_freq_inh=0
+	    (3 << 5) |		// P_ctrl_pre_freq_step=3
+	    (1 << 0),		// P_pre_freq_win_len=1
+
+	1, 903,
+	(0 << 4) | 2,		// P_divclksel=0 P_divbitsel=2 (was clk=3,bit=1 for MPW)
+
+	0,
+};
+
+static u16 dib8000_identify(struct i2c_device *client)
+{
+	u16 value;
+
+	//because of glitches sometimes
+	value = dib8000_i2c_read16(client, 896);
+
+	if ((value = dib8000_i2c_read16(client, 896)) != 0x01b3) {
+		dprintk("wrong Vendor ID (read=0x%x)", value);
+		return 0;
+	}
+
+	value = dib8000_i2c_read16(client, 897);
+	if (value != 0x8000 && value != 0x8001 && value != 0x8002) {
+		dprintk("wrong Device ID (%x)", value);
+		return 0;
+	}
+
+	switch (value) {
+	case 0x8000:
+		dprintk("found DiB8000A");
+		break;
+	case 0x8001:
+		dprintk("found DiB8000B");
+		break;
+	case 0x8002:
+		dprintk("found DiB8000C");
+		break;
+	}
+	return value;
+}
+
+static int dib8000_reset(struct dvb_frontend *fe)
+{
+	struct dib8000_state *state = fe->demodulator_priv;
+
+	dib8000_write_word(state, 1287, 0x0003);	/* sram lead in, rdy */
+
+	if ((state->revision = dib8000_identify(&state->i2c)) == 0)
+		return -EINVAL;
+
+	if (state->revision == 0x8000)
+		dprintk("error : dib8000 MA not supported");
+
+	dibx000_reset_i2c_master(&state->i2c_master);
+
+	dib8000_set_power_mode(state, DIB8000M_POWER_ALL);
+
+	/* always leave the VBG voltage on - it consumes almost nothing but takes a long time to start */
+	dib8000_set_adc_state(state, DIBX000_VBG_ENABLE);
+
+	/* restart all parts */
+	dib8000_write_word(state, 770, 0xffff);
+	dib8000_write_word(state, 771, 0xffff);
+	dib8000_write_word(state, 772, 0xfffc);
+	dib8000_write_word(state, 898, 0x000c);	// sad
+	dib8000_write_word(state, 1280, 0x004d);
+	dib8000_write_word(state, 1281, 0x000c);
+
+	dib8000_write_word(state, 770, 0x0000);
+	dib8000_write_word(state, 771, 0x0000);
+	dib8000_write_word(state, 772, 0x0000);
+	dib8000_write_word(state, 898, 0x0004);	// sad
+	dib8000_write_word(state, 1280, 0x0000);
+	dib8000_write_word(state, 1281, 0x0000);
+
+	/* drives */
+	if (state->cfg.drives)
+		dib8000_write_word(state, 906, state->cfg.drives);
+	else {
+		dprintk("using standard PAD-drive-settings, please adjust settings in config-struct to be optimal.");
+		dib8000_write_word(state, 906, 0x2d98);	// min drive SDRAM - not optimal - adjust
+	}
+
+	dib8000_reset_pll(state);
+
+	if (dib8000_reset_gpio(state) != 0)
+		dprintk("GPIO reset was not successful.");
+
+	if (dib8000_set_output_mode(state, OUTMODE_HIGH_Z) != 0)
+		dprintk("OUTPUT_MODE could not be resetted.");
+
+	state->current_agc = NULL;
+
+	// P_iqc_alpha_pha, P_iqc_alpha_amp, P_iqc_dcc_alpha, ...
+	/* P_iqc_ca2 = 0; P_iqc_impnc_on = 0; P_iqc_mode = 0; */
+	if (state->cfg.pll->ifreq == 0)
+		dib8000_write_word(state, 40, 0x0755);	/* P_iqc_corr_inh = 0 enable IQcorr block */
+	else
+		dib8000_write_word(state, 40, 0x1f55);	/* P_iqc_corr_inh = 1 disable IQcorr block */
+
+	{
+		u16 l = 0, r;
+		const u16 *n;
+		n = dib8000_defaults;
+		l = *n++;
+		while (l) {
+			r = *n++;
+			do {
+				dib8000_write_word(state, r, *n++);
+				r++;
+			} while (--l);
+			l = *n++;
+		}
+	}
+	state->isdbt_cfg_loaded = 0;
+
+	//div_cfg override for special configs
+	if (state->cfg.div_cfg != 0)
+		dib8000_write_word(state, 903, state->cfg.div_cfg);
+
+	/* unforce divstr regardless whether i2c enumeration was done or not */
+	dib8000_write_word(state, 1285, dib8000_read_word(state, 1285) & ~(1 << 1));
+
+	dib8000_set_bandwidth(state, 6000);
+
+	dib8000_set_adc_state(state, DIBX000_SLOW_ADC_ON);
+	dib8000_sad_calib(state);
+	dib8000_set_adc_state(state, DIBX000_SLOW_ADC_OFF);
+
+	dib8000_set_power_mode(state, DIB8000M_POWER_INTERFACE_ONLY);
+
+	return 0;
+}
+
+static void dib8000_restart_agc(struct dib8000_state *state)
+{
+	// P_restart_iqc & P_restart_agc
+	dib8000_write_word(state, 770, 0x0a00);
+	dib8000_write_word(state, 770, 0x0000);
+}
+
+static int dib8000_update_lna(struct dib8000_state *state)
+{
+	u16 dyn_gain;
+
+	if (state->cfg.update_lna) {
+		// read dyn_gain here (because it is demod-dependent and not tuner)
+		dyn_gain = dib8000_read_word(state, 390);
+
+		if (state->cfg.update_lna(&state->fe, dyn_gain)) {	// LNA has changed
+			dib8000_restart_agc(state);
+			return 1;
+		}
+	}
+	return 0;
+}
+
+static int dib8000_set_agc_config(struct dib8000_state *state, u8 band)
+{
+	struct dibx000_agc_config *agc = NULL;
+	int i;
+	if (state->current_band == band && state->current_agc != NULL)
+		return 0;
+	state->current_band = band;
+
+	for (i = 0; i < state->cfg.agc_config_count; i++)
+		if (state->cfg.agc[i].band_caps & band) {
+			agc = &state->cfg.agc[i];
+			break;
+		}
+
+	if (agc == NULL) {
+		dprintk("no valid AGC configuration found for band 0x%02x", band);
+		return -EINVAL;
+	}
+
+	state->current_agc = agc;
+
+	/* AGC */
+	dib8000_write_word(state, 76, agc->setup);
+	dib8000_write_word(state, 77, agc->inv_gain);
+	dib8000_write_word(state, 78, agc->time_stabiliz);
+	dib8000_write_word(state, 101, (agc->alpha_level << 12) | agc->thlock);
+
+	// Demod AGC loop configuration
+	dib8000_write_word(state, 102, (agc->alpha_mant << 5) | agc->alpha_exp);
+	dib8000_write_word(state, 103, (agc->beta_mant << 6) | agc->beta_exp);
+
+	dprintk("WBD: ref: %d, sel: %d, active: %d, alpha: %d",
+		state->wbd_ref != 0 ? state->wbd_ref : agc->wbd_ref, agc->wbd_sel, !agc->perform_agc_softsplit, agc->wbd_sel);
+
+	/* AGC continued */
+	if (state->wbd_ref != 0)
+		dib8000_write_word(state, 106, state->wbd_ref);
+	else			// use default
+		dib8000_write_word(state, 106, agc->wbd_ref);
+	dib8000_write_word(state, 107, (agc->wbd_alpha << 9) | (agc->perform_agc_softsplit << 8));
+	dib8000_write_word(state, 108, agc->agc1_max);
+	dib8000_write_word(state, 109, agc->agc1_min);
+	dib8000_write_word(state, 110, agc->agc2_max);
+	dib8000_write_word(state, 111, agc->agc2_min);
+	dib8000_write_word(state, 112, (agc->agc1_pt1 << 8) | agc->agc1_pt2);
+	dib8000_write_word(state, 113, (agc->agc1_slope1 << 8) | agc->agc1_slope2);
+	dib8000_write_word(state, 114, (agc->agc2_pt1 << 8) | agc->agc2_pt2);
+	dib8000_write_word(state, 115, (agc->agc2_slope1 << 8) | agc->agc2_slope2);
+
+	dib8000_write_word(state, 75, agc->agc1_pt3);
+	dib8000_write_word(state, 923, (dib8000_read_word(state, 923) & 0xffe3) | (agc->wbd_inv << 4) | (agc->wbd_sel << 2));	/*LB : 929 -> 923 */
+
+	return 0;
+}
+
+static int dib8000_agc_soft_split(struct dib8000_state *state)
+{
+	u16 agc, split_offset;
+
+	if (!state->current_agc || !state->current_agc->perform_agc_softsplit || state->current_agc->split.max == 0)
+		return FE_CALLBACK_TIME_NEVER;
+
+	// n_agc_global
+	agc = dib8000_read_word(state, 390);
+
+	if (agc > state->current_agc->split.min_thres)
+		split_offset = state->current_agc->split.min;
+	else if (agc < state->current_agc->split.max_thres)
+		split_offset = state->current_agc->split.max;
+	else
+		split_offset = state->current_agc->split.max *
+		    (agc - state->current_agc->split.min_thres) / (state->current_agc->split.max_thres - state->current_agc->split.min_thres);
+
+	dprintk("AGC split_offset: %d", split_offset);
+
+	// P_agc_force_split and P_agc_split_offset
+	dib8000_write_word(state, 107, (dib8000_read_word(state, 107) & 0xff00) | split_offset);
+	return 5000;
+}
+
+static int dib8000_agc_startup(struct dvb_frontend *fe)
+{
+	struct dib8000_state *state = fe->demodulator_priv;
+	enum frontend_tune_state *tune_state = &state->tune_state;
+
+	int ret = 0;
+
+	switch (*tune_state) {
+	case CT_AGC_START:
+		// set power-up level: interf+analog+AGC
+
+		dib8000_set_adc_state(state, DIBX000_ADC_ON);
+
+		if (dib8000_set_agc_config(state, (unsigned char)(BAND_OF_FREQUENCY(fe->dtv_property_cache.frequency / 1000))) != 0) {
+			*tune_state = CT_AGC_STOP;
+			state->status = FE_STATUS_TUNE_FAILED;
+			break;
+		}
+
+		ret = 70;
+		*tune_state = CT_AGC_STEP_0;
+		break;
+
+	case CT_AGC_STEP_0:
+		//AGC initialization
+		if (state->cfg.agc_control)
+			state->cfg.agc_control(&state->fe, 1);
+
+		dib8000_restart_agc(state);
+
+		// wait AGC rough lock time
+		ret = 50;
+		*tune_state = CT_AGC_STEP_1;
+		break;
+
+	case CT_AGC_STEP_1:
+		// wait AGC accurate lock time
+		ret = 70;
+
+		if (dib8000_update_lna(state))
+			// wait only AGC rough lock time
+			ret = 50;
+		else
+			*tune_state = CT_AGC_STEP_2;
+		break;
+
+	case CT_AGC_STEP_2:
+		dib8000_agc_soft_split(state);
+
+		if (state->cfg.agc_control)
+			state->cfg.agc_control(&state->fe, 0);
+
+		*tune_state = CT_AGC_STOP;
+		break;
+	default:
+		ret = dib8000_agc_soft_split(state);
+		break;
+	}
+	return ret;
+
+}
+
+static void dib8000_update_timf(struct dib8000_state *state)
+{
+	u32 timf = state->timf = dib8000_read32(state, 435);
+
+	dib8000_write_word(state, 29, (u16) (timf >> 16));
+	dib8000_write_word(state, 30, (u16) (timf & 0xffff));
+	dprintk("Updated timing frequency: %d (default: %d)", state->timf, state->timf_default);
+}
+
+static void dib8000_set_channel(struct dib8000_state *state, u8 seq, u8 autosearching)
+{
+	u16 mode, max_constellation, seg_diff_mask = 0, nbseg_diff = 0;
+	u8 guard, crate, constellation, timeI;
+	u8 permu_seg[] = { 6, 5, 7, 4, 8, 3, 9, 2, 10, 1, 11, 0, 12 };
+	u16 i, coeff[4], P_cfr_left_edge = 0, P_cfr_right_edge = 0, seg_mask13 = 0x1fff;	// All 13 segments enabled
+	const s16 *ncoeff, *ana_fe;
+	u16 tmcc_pow = 0;
+	u16 coff_pow = 0x2800;
+	u16 init_prbs = 0xfff;
+	u16 ana_gain = 0;
+	u16 adc_target_16dB[11] = {
+		(1 << 13) - 825 - 117,
+		(1 << 13) - 837 - 117,
+		(1 << 13) - 811 - 117,
+		(1 << 13) - 766 - 117,
+		(1 << 13) - 737 - 117,
+		(1 << 13) - 693 - 117,
+		(1 << 13) - 648 - 117,
+		(1 << 13) - 619 - 117,
+		(1 << 13) - 575 - 117,
+		(1 << 13) - 531 - 117,
+		(1 << 13) - 501 - 117
+	};
+
+	if (state->ber_monitored_layer != LAYER_ALL)
+		dib8000_write_word(state, 285, (dib8000_read_word(state, 285) & 0x60) | state->ber_monitored_layer);
+	else
+		dib8000_write_word(state, 285, dib8000_read_word(state, 285) & 0x60);
+
+	i = dib8000_read_word(state, 26) & 1;	// P_dds_invspec
+	dib8000_write_word(state, 26, state->fe.dtv_property_cache.inversion ^ i);
+
+	if (state->fe.dtv_property_cache.isdbt_sb_mode) {
+		//compute new dds_freq for the seg and adjust prbs
+		int seg_offset =
+		    state->fe.dtv_property_cache.isdbt_sb_segment_idx - (state->fe.dtv_property_cache.isdbt_sb_segment_count / 2) -
+		    (state->fe.dtv_property_cache.isdbt_sb_segment_count % 2);
+		int clk = state->cfg.pll->internal;
+		u32 segtodds = ((u32) (430 << 23) / clk) << 3;	// segtodds = SegBW / Fclk * pow(2,26)
+		int dds_offset = seg_offset * segtodds;
+		int new_dds, sub_channel;
+		if ((state->fe.dtv_property_cache.isdbt_sb_segment_count % 2) == 0)	// if even
+			dds_offset -= (int)(segtodds / 2);
+
+		if (state->cfg.pll->ifreq == 0) {
+			if ((state->fe.dtv_property_cache.inversion ^ i) == 0) {
+				dib8000_write_word(state, 26, dib8000_read_word(state, 26) | 1);
+				new_dds = dds_offset;
+			} else
+				new_dds = dds_offset;
+
+			// We shift tuning frequency if the wanted segment is :
+			//  - the segment of center frequency with an odd total number of segments
+			//  - the segment to the left of center frequency with an even total number of segments
+			//  - the segment to the right of center frequency with an even total number of segments
+			if ((state->fe.dtv_property_cache.delivery_system == SYS_ISDBT) && (state->fe.dtv_property_cache.isdbt_sb_mode == 1)
+			    &&
+			    (((state->fe.dtv_property_cache.isdbt_sb_segment_count % 2)
+			      && (state->fe.dtv_property_cache.isdbt_sb_segment_idx ==
+				  ((state->fe.dtv_property_cache.isdbt_sb_segment_count / 2) + 1)))
+			     || (((state->fe.dtv_property_cache.isdbt_sb_segment_count % 2) == 0)
+				 && (state->fe.dtv_property_cache.isdbt_sb_segment_idx == (state->fe.dtv_property_cache.isdbt_sb_segment_count / 2)))
+			     || (((state->fe.dtv_property_cache.isdbt_sb_segment_count % 2) == 0)
+				 && (state->fe.dtv_property_cache.isdbt_sb_segment_idx ==
+				     ((state->fe.dtv_property_cache.isdbt_sb_segment_count / 2) + 1)))
+			    )) {
+				new_dds -= ((u32) (850 << 22) / clk) << 4;	// new_dds = 850 (freq shift in KHz) / Fclk * pow(2,26)
+			}
+		} else {
+			if ((state->fe.dtv_property_cache.inversion ^ i) == 0)
+				new_dds = state->cfg.pll->ifreq - dds_offset;
+			else
+				new_dds = state->cfg.pll->ifreq + dds_offset;
+		}
+		dib8000_write_word(state, 27, (u16) ((new_dds >> 16) & 0x01ff));
+		dib8000_write_word(state, 28, (u16) (new_dds & 0xffff));
+		if (state->fe.dtv_property_cache.isdbt_sb_segment_count % 2)	// if odd
+			sub_channel = ((state->fe.dtv_property_cache.isdbt_sb_subchannel + (3 * seg_offset) + 1) % 41) / 3;
+		else		// if even
+			sub_channel = ((state->fe.dtv_property_cache.isdbt_sb_subchannel + (3 * seg_offset)) % 41) / 3;
+		sub_channel -= 6;
+
+		if (state->fe.dtv_property_cache.transmission_mode == TRANSMISSION_MODE_2K
+		    || state->fe.dtv_property_cache.transmission_mode == TRANSMISSION_MODE_4K) {
+			dib8000_write_word(state, 219, dib8000_read_word(state, 219) | 0x1);	//adp_pass =1
+			dib8000_write_word(state, 190, dib8000_read_word(state, 190) | (0x1 << 14));	//pha3_force_pha_shift = 1
+		} else {
+			dib8000_write_word(state, 219, dib8000_read_word(state, 219) & 0xfffe);	//adp_pass =0
+			dib8000_write_word(state, 190, dib8000_read_word(state, 190) & 0xbfff);	//pha3_force_pha_shift = 0
+		}
+
+		switch (state->fe.dtv_property_cache.transmission_mode) {
+		case TRANSMISSION_MODE_2K:
+			switch (sub_channel) {
+			case -6:
+				init_prbs = 0x0;
+				break;	// 41, 0, 1
+			case -5:
+				init_prbs = 0x423;
+				break;	// 02~04
+			case -4:
+				init_prbs = 0x9;
+				break;	// 05~07
+			case -3:
+				init_prbs = 0x5C7;
+				break;	// 08~10
+			case -2:
+				init_prbs = 0x7A6;
+				break;	// 11~13
+			case -1:
+				init_prbs = 0x3D8;
+				break;	// 14~16
+			case 0:
+				init_prbs = 0x527;
+				break;	// 17~19
+			case 1:
+				init_prbs = 0x7FF;
+				break;	// 20~22
+			case 2:
+				init_prbs = 0x79B;
+				break;	// 23~25
+			case 3:
+				init_prbs = 0x3D6;
+				break;	// 26~28
+			case 4:
+				init_prbs = 0x3A2;
+				break;	// 29~31
+			case 5:
+				init_prbs = 0x53B;
+				break;	// 32~34
+			case 6:
+				init_prbs = 0x2F4;
+				break;	// 35~37
+			default:
+			case 7:
+				init_prbs = 0x213;
+				break;	// 38~40
+			}
+			break;
+
+		case TRANSMISSION_MODE_4K:
+			switch (sub_channel) {
+			case -6:
+				init_prbs = 0x0;
+				break;	// 41, 0, 1
+			case -5:
+				init_prbs = 0x208;
+				break;	// 02~04
+			case -4:
+				init_prbs = 0xC3;
+				break;	// 05~07
+			case -3:
+				init_prbs = 0x7B9;
+				break;	// 08~10
+			case -2:
+				init_prbs = 0x423;
+				break;	// 11~13
+			case -1:
+				init_prbs = 0x5C7;
+				break;	// 14~16
+			case 0:
+				init_prbs = 0x3D8;
+				break;	// 17~19
+			case 1:
+				init_prbs = 0x7FF;
+				break;	// 20~22
+			case 2:
+				init_prbs = 0x3D6;
+				break;	// 23~25
+			case 3:
+				init_prbs = 0x53B;
+				break;	// 26~28
+			case 4:
+				init_prbs = 0x213;
+				break;	// 29~31
+			case 5:
+				init_prbs = 0x29;
+				break;	// 32~34
+			case 6:
+				init_prbs = 0xD0;
+				break;	// 35~37
+			default:
+			case 7:
+				init_prbs = 0x48E;
+				break;	// 38~40
+			}
+			break;
+
+		default:
+		case TRANSMISSION_MODE_8K:
+			switch (sub_channel) {
+			case -6:
+				init_prbs = 0x0;
+				break;	// 41, 0, 1
+			case -5:
+				init_prbs = 0x740;
+				break;	// 02~04
+			case -4:
+				init_prbs = 0x069;
+				break;	// 05~07
+			case -3:
+				init_prbs = 0x7DD;
+				break;	// 08~10
+			case -2:
+				init_prbs = 0x208;
+				break;	// 11~13
+			case -1:
+				init_prbs = 0x7B9;
+				break;	// 14~16
+			case 0:
+				init_prbs = 0x5C7;
+				break;	// 17~19
+			case 1:
+				init_prbs = 0x7FF;
+				break;	// 20~22
+			case 2:
+				init_prbs = 0x53B;
+				break;	// 23~25
+			case 3:
+				init_prbs = 0x29;
+				break;	// 26~28
+			case 4:
+				init_prbs = 0x48E;
+				break;	// 29~31
+			case 5:
+				init_prbs = 0x4C4;
+				break;	// 32~34
+			case 6:
+				init_prbs = 0x367;
+				break;	// 33~37
+			default:
+			case 7:
+				init_prbs = 0x684;
+				break;	// 38~40
+			}
+			break;
+		}
+	} else {		// if not state->fe.dtv_property_cache.isdbt_sb_mode
+		dib8000_write_word(state, 27, (u16) ((state->cfg.pll->ifreq >> 16) & 0x01ff));
+		dib8000_write_word(state, 28, (u16) (state->cfg.pll->ifreq & 0xffff));
+		dib8000_write_word(state, 26, (u16) ((state->cfg.pll->ifreq >> 25) & 0x0003));
+	}
+	/*P_mode == ?? */
+	dib8000_write_word(state, 10, (seq << 4));
+	//  dib8000_write_word(state, 287, (dib8000_read_word(state, 287) & 0xe000) | 0x1000);
+
+	switch (state->fe.dtv_property_cache.guard_interval) {
+	case GUARD_INTERVAL_1_32:
+		guard = 0;
+		break;
+	case GUARD_INTERVAL_1_16:
+		guard = 1;
+		break;
+	case GUARD_INTERVAL_1_8:
+		guard = 2;
+		break;
+	case GUARD_INTERVAL_1_4:
+	default:
+		guard = 3;
+		break;
+	}
+
+	dib8000_write_word(state, 1, (init_prbs << 2) | (guard & 0x3));	// ADDR 1
+
+	max_constellation = DQPSK;
+	for (i = 0; i < 3; i++) {
+		switch (state->fe.dtv_property_cache.layer[i].modulation) {
+		case DQPSK:
+			constellation = 0;
+			break;
+		case QPSK:
+			constellation = 1;
+			break;
+		case QAM_16:
+			constellation = 2;
+			break;
+		case QAM_64:
+		default:
+			constellation = 3;
+			break;
+		}
+
+		switch (state->fe.dtv_property_cache.layer[i].fec) {
+		case FEC_1_2:
+			crate = 1;
+			break;
+		case FEC_2_3:
+			crate = 2;
+			break;
+		case FEC_3_4:
+			crate = 3;
+			break;
+		case FEC_5_6:
+			crate = 5;
+			break;
+		case FEC_7_8:
+		default:
+			crate = 7;
+			break;
+		}
+
+		if ((state->fe.dtv_property_cache.layer[i].interleaving > 0) &&
+		    ((state->fe.dtv_property_cache.layer[i].interleaving <= 3) ||
+		     (state->fe.dtv_property_cache.layer[i].interleaving == 4 && state->fe.dtv_property_cache.isdbt_sb_mode == 1))
+		    )
+			timeI = state->fe.dtv_property_cache.layer[i].interleaving;
+		else
+			timeI = 0;
+		dib8000_write_word(state, 2 + i, (constellation << 10) | ((state->fe.dtv_property_cache.layer[i].segment_count & 0xf) << 6) |
+				   (crate << 3) | timeI);
+		if (state->fe.dtv_property_cache.layer[i].segment_count > 0) {
+			switch (max_constellation) {
+			case DQPSK:
+			case QPSK:
+				if (state->fe.dtv_property_cache.layer[i].modulation == QAM_16 ||
+				    state->fe.dtv_property_cache.layer[i].modulation == QAM_64)
+					max_constellation = state->fe.dtv_property_cache.layer[i].modulation;
+				break;
+			case QAM_16:
+				if (state->fe.dtv_property_cache.layer[i].modulation == QAM_64)
+					max_constellation = state->fe.dtv_property_cache.layer[i].modulation;
+				break;
+			}
+		}
+	}
+
+	mode = fft_to_mode(state);
+
+	//dib8000_write_word(state, 5, 13); /*p_last_seg = 13*/
+
+	dib8000_write_word(state, 274, (dib8000_read_word(state, 274) & 0xffcf) |
+			   ((state->fe.dtv_property_cache.isdbt_partial_reception & 1) << 5) | ((state->fe.dtv_property_cache.
+												 isdbt_sb_mode & 1) << 4));
+
+	dprintk("mode = %d ; guard = %d", mode, state->fe.dtv_property_cache.guard_interval);
+
+	/* signal optimization parameter */
+
+	if (state->fe.dtv_property_cache.isdbt_partial_reception) {
+		seg_diff_mask = (state->fe.dtv_property_cache.layer[0].modulation == DQPSK) << permu_seg[0];
+		for (i = 1; i < 3; i++)
+			nbseg_diff +=
+			    (state->fe.dtv_property_cache.layer[i].modulation == DQPSK) * state->fe.dtv_property_cache.layer[i].segment_count;
+		for (i = 0; i < nbseg_diff; i++)
+			seg_diff_mask |= 1 << permu_seg[i + 1];
+	} else {
+		for (i = 0; i < 3; i++)
+			nbseg_diff +=
+			    (state->fe.dtv_property_cache.layer[i].modulation == DQPSK) * state->fe.dtv_property_cache.layer[i].segment_count;
+		for (i = 0; i < nbseg_diff; i++)
+			seg_diff_mask |= 1 << permu_seg[i];
+	}
+	dprintk("nbseg_diff = %X (%d)", seg_diff_mask, seg_diff_mask);
+
+	state->differential_constellation = (seg_diff_mask != 0);
+	dib8000_set_diversity_in(&state->fe, state->diversity_onoff);
+
+	if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) {	// ISDB-Tsb
+		if (state->fe.dtv_property_cache.isdbt_partial_reception == 1)	// 3-segments
+			seg_mask13 = 0x00E0;
+		else		// 1-segment
+			seg_mask13 = 0x0040;
+	} else
+		seg_mask13 = 0x1fff;
+
+	// WRITE: Mode & Diff mask
+	dib8000_write_word(state, 0, (mode << 13) | seg_diff_mask);
+
+	if ((seg_diff_mask) || (state->fe.dtv_property_cache.isdbt_sb_mode))
+		dib8000_write_word(state, 268, (dib8000_read_word(state, 268) & 0xF9FF) | 0x0200);
+	else
+		dib8000_write_word(state, 268, (2 << 9) | 39);	//init value
+
+	// ---- SMALL ----
+	// P_small_seg_diff
+	dib8000_write_word(state, 352, seg_diff_mask);	// ADDR 352
+
+	dib8000_write_word(state, 353, seg_mask13);	// ADDR 353
+
+/*     // P_small_narrow_band=0, P_small_last_seg=13, P_small_offset_num_car=5 */
+	// dib8000_write_word(state, 351, (state->fe.dtv_property_cache.isdbt_sb_mode << 8) | (13 << 4) | 5 );
+
+	// ---- SMALL ----
+	if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) {
+		switch (state->fe.dtv_property_cache.transmission_mode) {
+		case TRANSMISSION_MODE_2K:
+			if (state->fe.dtv_property_cache.isdbt_partial_reception == 0) {	// 1-seg
+				if (state->fe.dtv_property_cache.layer[0].modulation == DQPSK)	// DQPSK
+					ncoeff = coeff_2k_sb_1seg_dqpsk;
+				else	// QPSK or QAM
+					ncoeff = coeff_2k_sb_1seg;
+			} else {	// 3-segments
+				if (state->fe.dtv_property_cache.layer[0].modulation == DQPSK) {	// DQPSK on central segment
+					if (state->fe.dtv_property_cache.layer[1].modulation == DQPSK)	// DQPSK on external segments
+						ncoeff = coeff_2k_sb_3seg_0dqpsk_1dqpsk;
+					else	// QPSK or QAM on external segments
+						ncoeff = coeff_2k_sb_3seg_0dqpsk;
+				} else {	// QPSK or QAM on central segment
+					if (state->fe.dtv_property_cache.layer[1].modulation == DQPSK)	// DQPSK on external segments
+						ncoeff = coeff_2k_sb_3seg_1dqpsk;
+					else	// QPSK or QAM on external segments
+						ncoeff = coeff_2k_sb_3seg;
+				}
+			}
+			break;
+
+		case TRANSMISSION_MODE_4K:
+			if (state->fe.dtv_property_cache.isdbt_partial_reception == 0) {	// 1-seg
+				if (state->fe.dtv_property_cache.layer[0].modulation == DQPSK)	// DQPSK
+					ncoeff = coeff_4k_sb_1seg_dqpsk;
+				else	// QPSK or QAM
+					ncoeff = coeff_4k_sb_1seg;
+			} else {	// 3-segments
+				if (state->fe.dtv_property_cache.layer[0].modulation == DQPSK) {	// DQPSK on central segment
+					if (state->fe.dtv_property_cache.layer[1].modulation == DQPSK) {	// DQPSK on external segments
+						ncoeff = coeff_4k_sb_3seg_0dqpsk_1dqpsk;
+					} else {	// QPSK or QAM on external segments
+						ncoeff = coeff_4k_sb_3seg_0dqpsk;
+					}
+				} else {	// QPSK or QAM on central segment
+					if (state->fe.dtv_property_cache.layer[1].modulation == DQPSK) {	// DQPSK on external segments
+						ncoeff = coeff_4k_sb_3seg_1dqpsk;
+					} else	// QPSK or QAM on external segments
+						ncoeff = coeff_4k_sb_3seg;
+				}
+			}
+			break;
+
+		case TRANSMISSION_MODE_AUTO:
+		case TRANSMISSION_MODE_8K:
+		default:
+			if (state->fe.dtv_property_cache.isdbt_partial_reception == 0) {	// 1-seg
+				if (state->fe.dtv_property_cache.layer[0].modulation == DQPSK)	// DQPSK
+					ncoeff = coeff_8k_sb_1seg_dqpsk;
+				else	// QPSK or QAM
+					ncoeff = coeff_8k_sb_1seg;
+			} else {	// 3-segments
+				if (state->fe.dtv_property_cache.layer[0].modulation == DQPSK) {	// DQPSK on central segment
+					if (state->fe.dtv_property_cache.layer[1].modulation == DQPSK) {	// DQPSK on external segments
+						ncoeff = coeff_8k_sb_3seg_0dqpsk_1dqpsk;
+					} else {	// QPSK or QAM on external segments
+						ncoeff = coeff_8k_sb_3seg_0dqpsk;
+					}
+				} else {	// QPSK or QAM on central segment
+					if (state->fe.dtv_property_cache.layer[1].modulation == DQPSK) {	// DQPSK on external segments
+						ncoeff = coeff_8k_sb_3seg_1dqpsk;
+					} else	// QPSK or QAM on external segments
+						ncoeff = coeff_8k_sb_3seg;
+				}
+			}
+			break;
+		}
+	}
+	if (state->fe.dtv_property_cache.isdbt_sb_mode == 1)
+		for (i = 0; i < 8; i++)
+			dib8000_write_word(state, 343 + i, ncoeff[i]);
+
+	// P_small_coef_ext_enable=ISDB-Tsb, P_small_narrow_band=ISDB-Tsb, P_small_last_seg=13, P_small_offset_num_car=5
+	dib8000_write_word(state, 351,
+			   (state->fe.dtv_property_cache.isdbt_sb_mode << 9) | (state->fe.dtv_property_cache.isdbt_sb_mode << 8) | (13 << 4) | 5);
+
+	// ---- COFF ----
+	// Carloff, the most robust
+	if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) {	// Sound Broadcasting mode - use both TMCC and AC pilots
+
+		// P_coff_cpil_alpha=4, P_coff_inh=0, P_coff_cpil_winlen=64
+		// P_coff_narrow_band=1, P_coff_square_val=1, P_coff_one_seg=~partial_rcpt, P_coff_use_tmcc=1, P_coff_use_ac=1
+		dib8000_write_word(state, 187,
+				   (4 << 12) | (0 << 11) | (63 << 5) | (0x3 << 3) | ((~state->fe.dtv_property_cache.isdbt_partial_reception & 1) << 2)
+				   | 0x3);
+
+/*             // P_small_coef_ext_enable = 1 */
+/*             dib8000_write_word(state, 351, dib8000_read_word(state, 351) | 0x200); */
+
+		if (state->fe.dtv_property_cache.isdbt_partial_reception == 0) {	// Sound Broadcasting mode 1 seg
+
+			// P_coff_winlen=63, P_coff_thres_lock=15, P_coff_one_seg_width= (P_mode == 3) , P_coff_one_seg_sym= (P_mode-1)
+			if (mode == 3)
+				dib8000_write_word(state, 180, 0x1fcf | ((mode - 1) << 14));
+			else
+				dib8000_write_word(state, 180, 0x0fcf | ((mode - 1) << 14));
+			// P_ctrl_corm_thres4pre_freq_inh=1,P_ctrl_pre_freq_mode_sat=1,
+			// P_ctrl_pre_freq_inh=0, P_ctrl_pre_freq_step = 5, P_pre_freq_win_len=4
+			dib8000_write_word(state, 338, (1 << 12) | (1 << 10) | (0 << 9) | (5 << 5) | 4);
+			// P_ctrl_pre_freq_win_len=16, P_ctrl_pre_freq_thres_lockin=8
+			dib8000_write_word(state, 340, (16 << 6) | (8 << 0));
+			// P_ctrl_pre_freq_thres_lockout=6, P_small_use_tmcc/ac/cp=1
+			dib8000_write_word(state, 341, (6 << 3) | (1 << 2) | (1 << 1) | (1 << 0));
+
+			// P_coff_corthres_8k, 4k, 2k and P_coff_cpilthres_8k, 4k, 2k
+			dib8000_write_word(state, 181, 300);
+			dib8000_write_word(state, 182, 150);
+			dib8000_write_word(state, 183, 80);
+			dib8000_write_word(state, 184, 300);
+			dib8000_write_word(state, 185, 150);
+			dib8000_write_word(state, 186, 80);
+		} else {	// Sound Broadcasting mode 3 seg
+			// P_coff_one_seg_sym= 1, P_coff_one_seg_width= 1, P_coff_winlen=63, P_coff_thres_lock=15
+			/*                 if (mode == 3) */
+			/*                     dib8000_write_word(state, 180, 0x2fca | ((0) << 14)); */
+			/*                 else */
+			/*                     dib8000_write_word(state, 180, 0x2fca | ((1) << 14)); */
+			dib8000_write_word(state, 180, 0x1fcf | (1 << 14));
+
+			// P_ctrl_corm_thres4pre_freq_inh = 1, P_ctrl_pre_freq_mode_sat=1,
+			// P_ctrl_pre_freq_inh=0, P_ctrl_pre_freq_step = 4, P_pre_freq_win_len=4
+			dib8000_write_word(state, 338, (1 << 12) | (1 << 10) | (0 << 9) | (4 << 5) | 4);
+			// P_ctrl_pre_freq_win_len=16, P_ctrl_pre_freq_thres_lockin=8
+			dib8000_write_word(state, 340, (16 << 6) | (8 << 0));
+			//P_ctrl_pre_freq_thres_lockout=6, P_small_use_tmcc/ac/cp=1
+			dib8000_write_word(state, 341, (6 << 3) | (1 << 2) | (1 << 1) | (1 << 0));
+
+			// P_coff_corthres_8k, 4k, 2k and P_coff_cpilthres_8k, 4k, 2k
+			dib8000_write_word(state, 181, 350);
+			dib8000_write_word(state, 182, 300);
+			dib8000_write_word(state, 183, 250);
+			dib8000_write_word(state, 184, 350);
+			dib8000_write_word(state, 185, 300);
+			dib8000_write_word(state, 186, 250);
+		}
+
+	} else if (state->isdbt_cfg_loaded == 0) {	// if not Sound Broadcasting mode : put default values for 13 segments
+		dib8000_write_word(state, 180, (16 << 6) | 9);
+		dib8000_write_word(state, 187, (4 << 12) | (8 << 5) | 0x2);
+		coff_pow = 0x2800;
+		for (i = 0; i < 6; i++)
+			dib8000_write_word(state, 181 + i, coff_pow);
+
+		// P_ctrl_corm_thres4pre_freq_inh=1, P_ctrl_pre_freq_mode_sat=1,
+		// P_ctrl_pre_freq_mode_sat=1, P_ctrl_pre_freq_inh=0, P_ctrl_pre_freq_step = 3, P_pre_freq_win_len=1
+		dib8000_write_word(state, 338, (1 << 12) | (1 << 10) | (0 << 9) | (3 << 5) | 1);
+
+		// P_ctrl_pre_freq_win_len=8, P_ctrl_pre_freq_thres_lockin=6
+		dib8000_write_word(state, 340, (8 << 6) | (6 << 0));
+		// P_ctrl_pre_freq_thres_lockout=4, P_small_use_tmcc/ac/cp=1
+		dib8000_write_word(state, 341, (4 << 3) | (1 << 2) | (1 << 1) | (1 << 0));
+	}
+	// ---- FFT ----
+	if (state->fe.dtv_property_cache.isdbt_sb_mode == 1 && state->fe.dtv_property_cache.isdbt_partial_reception == 0)	// 1-seg
+		dib8000_write_word(state, 178, 64);	// P_fft_powrange=64
+	else
+		dib8000_write_word(state, 178, 32);	// P_fft_powrange=32
+
+	/* make the cpil_coff_lock more robust but slower p_coff_winlen
+	 * 6bits; p_coff_thres_lock 6bits (for coff lock if needed)
+	 */
+	/* if ( ( nbseg_diff>0)&&(nbseg_diff<13))
+	   dib8000_write_word(state, 187, (dib8000_read_word(state, 187) & 0xfffb) | (1 << 3)); */
+
+	dib8000_write_word(state, 189, ~seg_mask13 | seg_diff_mask);	/* P_lmod4_seg_inh       */
+	dib8000_write_word(state, 192, ~seg_mask13 | seg_diff_mask);	/* P_pha3_seg_inh        */
+	dib8000_write_word(state, 225, ~seg_mask13 | seg_diff_mask);	/* P_tac_seg_inh         */
+	if ((!state->fe.dtv_property_cache.isdbt_sb_mode) && (state->cfg.pll->ifreq == 0))
+		dib8000_write_word(state, 266, ~seg_mask13 | seg_diff_mask | 0x40);	/* P_equal_noise_seg_inh */
+	else
+		dib8000_write_word(state, 266, ~seg_mask13 | seg_diff_mask);	/* P_equal_noise_seg_inh */
+	dib8000_write_word(state, 287, ~seg_mask13 | 0x1000);	/* P_tmcc_seg_inh        */
+	//dib8000_write_word(state, 288, ~seg_mask13 | seg_diff_mask); /* P_tmcc_seg_eq_inh */
+	if (!autosearching)
+		dib8000_write_word(state, 288, (~seg_mask13 | seg_diff_mask) & 0x1fff);	/* P_tmcc_seg_eq_inh */
+	else
+		dib8000_write_word(state, 288, 0x1fff);	//disable equalisation of the tmcc when autosearch to be able to find the DQPSK channels.
+	dprintk("287 = %X (%d)", ~seg_mask13 | 0x1000, ~seg_mask13 | 0x1000);
+
+	dib8000_write_word(state, 211, seg_mask13 & (~seg_diff_mask));	/* P_des_seg_enabled     */
+
+	/* offset loop parameters */
+	if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) {
+		if (state->fe.dtv_property_cache.isdbt_partial_reception == 0)	// Sound Broadcasting mode 1 seg
+			/* P_timf_alpha = (11-P_mode), P_corm_alpha=6, P_corm_thres=0x80 */
+			dib8000_write_word(state, 32, ((11 - mode) << 12) | (6 << 8) | 0x40);
+
+		else		// Sound Broadcasting mode 3 seg
+			/* P_timf_alpha = (10-P_mode), P_corm_alpha=6, P_corm_thres=0x80 */
+			dib8000_write_word(state, 32, ((10 - mode) << 12) | (6 << 8) | 0x60);
+	} else
+		// TODO in 13 seg, timf_alpha can always be the same or not ?
+		/* P_timf_alpha = (9-P_mode, P_corm_alpha=6, P_corm_thres=0x80 */
+		dib8000_write_word(state, 32, ((9 - mode) << 12) | (6 << 8) | 0x80);
+
+	if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) {
+		if (state->fe.dtv_property_cache.isdbt_partial_reception == 0)	// Sound Broadcasting mode 1 seg
+			/* P_ctrl_pha_off_max=3   P_ctrl_sfreq_inh =0  P_ctrl_sfreq_step = (11-P_mode)  */
+			dib8000_write_word(state, 37, (3 << 5) | (0 << 4) | (10 - mode));
+
+		else		// Sound Broadcasting mode 3 seg
+			/* P_ctrl_pha_off_max=3   P_ctrl_sfreq_inh =0  P_ctrl_sfreq_step = (10-P_mode)  */
+			dib8000_write_word(state, 37, (3 << 5) | (0 << 4) | (9 - mode));
+	} else
+		/* P_ctrl_pha_off_max=3   P_ctrl_sfreq_inh =0  P_ctrl_sfreq_step = 9  */
+		dib8000_write_word(state, 37, (3 << 5) | (0 << 4) | (8 - mode));
+
+	/* P_dvsy_sync_wait - reuse mode */
+	switch (state->fe.dtv_property_cache.transmission_mode) {
+	case TRANSMISSION_MODE_8K:
+		mode = 256;
+		break;
+	case TRANSMISSION_MODE_4K:
+		mode = 128;
+		break;
+	default:
+	case TRANSMISSION_MODE_2K:
+		mode = 64;
+		break;
+	}
+	if (state->cfg.diversity_delay == 0)
+		mode = (mode * (1 << (guard)) * 3) / 2 + 48;	// add 50% SFN margin + compensate for one DVSY-fifo
+	else
+		mode = (mode * (1 << (guard)) * 3) / 2 + state->cfg.diversity_delay;	// add 50% SFN margin + compensate for DVSY-fifo
+	mode <<= 4;
+	dib8000_write_word(state, 273, (dib8000_read_word(state, 273) & 0x000f) | mode);
+
+	/* channel estimation fine configuration */
+	switch (max_constellation) {
+	case QAM_64:
+		ana_gain = 0x7;	// -1 : avoid def_est saturation when ADC target is -16dB
+		coeff[0] = 0x0148;	/* P_adp_regul_cnt 0.04 */
+		coeff[1] = 0xfff0;	/* P_adp_noise_cnt -0.002 */
+		coeff[2] = 0x00a4;	/* P_adp_regul_ext 0.02 */
+		coeff[3] = 0xfff8;	/* P_adp_noise_ext -0.001 */
+		//if (!state->cfg.hostbus_diversity) //if diversity, we should prehaps use the configuration of the max_constallation -1
+		break;
+	case QAM_16:
+		ana_gain = 0x7;	// -1 : avoid def_est saturation when ADC target is -16dB
+		coeff[0] = 0x023d;	/* P_adp_regul_cnt 0.07 */
+		coeff[1] = 0xffdf;	/* P_adp_noise_cnt -0.004 */
+		coeff[2] = 0x00a4;	/* P_adp_regul_ext 0.02 */
+		coeff[3] = 0xfff0;	/* P_adp_noise_ext -0.002 */
+		//if (!((state->cfg.hostbus_diversity) && (max_constellation == QAM_16)))
+		break;
+	default:
+		ana_gain = 0;	// 0 : goes along with ADC target at -22dB to keep good mobile performance and lock at sensitivity level
+		coeff[0] = 0x099a;	/* P_adp_regul_cnt 0.3 */
+		coeff[1] = 0xffae;	/* P_adp_noise_cnt -0.01 */
+		coeff[2] = 0x0333;	/* P_adp_regul_ext 0.1 */
+		coeff[3] = 0xfff8;	/* P_adp_noise_ext -0.002 */
+		break;
+	}
+	for (mode = 0; mode < 4; mode++)
+		dib8000_write_word(state, 215 + mode, coeff[mode]);
+
+	// update ana_gain depending on max constellation
+	dib8000_write_word(state, 116, ana_gain);
+	// update ADC target depending on ana_gain
+	if (ana_gain) {		// set -16dB ADC target for ana_gain=-1
+		for (i = 0; i < 10; i++)
+			dib8000_write_word(state, 80 + i, adc_target_16dB[i]);
+	} else {		// set -22dB ADC target for ana_gain=0
+		for (i = 0; i < 10; i++)
+			dib8000_write_word(state, 80 + i, adc_target_16dB[i] - 355);
+	}
+
+	// ---- ANA_FE ----
+	if (state->fe.dtv_property_cache.isdbt_sb_mode) {
+		if (state->fe.dtv_property_cache.isdbt_partial_reception == 1)	// 3-segments
+			ana_fe = ana_fe_coeff_3seg;
+		else		// 1-segment
+			ana_fe = ana_fe_coeff_1seg;
+	} else
+		ana_fe = ana_fe_coeff_13seg;
+
+	if (state->fe.dtv_property_cache.isdbt_sb_mode == 1 || state->isdbt_cfg_loaded == 0)
+		for (mode = 0; mode < 24; mode++)
+			dib8000_write_word(state, 117 + mode, ana_fe[mode]);
+
+	// ---- CHAN_BLK ----
+	for (i = 0; i < 13; i++) {
+		if ((((~seg_diff_mask) >> i) & 1) == 1) {
+			P_cfr_left_edge += (1 << i) * ((i == 0) || ((((seg_mask13 & (~seg_diff_mask)) >> (i - 1)) & 1) == 0));
+			P_cfr_right_edge += (1 << i) * ((i == 12) || ((((seg_mask13 & (~seg_diff_mask)) >> (i + 1)) & 1) == 0));
+		}
+	}
+	dib8000_write_word(state, 222, P_cfr_left_edge);	// P_cfr_left_edge
+	dib8000_write_word(state, 223, P_cfr_right_edge);	// P_cfr_right_edge
+	// "P_cspu_left_edge"  not used => do not care
+	// "P_cspu_right_edge" not used => do not care
+
+	if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) {	// ISDB-Tsb
+		dib8000_write_word(state, 228, 1);	// P_2d_mode_byp=1
+		dib8000_write_word(state, 205, dib8000_read_word(state, 205) & 0xfff0);	// P_cspu_win_cut = 0
+		if (state->fe.dtv_property_cache.isdbt_partial_reception == 0	// 1-segment
+		    && state->fe.dtv_property_cache.transmission_mode == TRANSMISSION_MODE_2K) {
+			//dib8000_write_word(state, 219, dib8000_read_word(state, 219) & 0xfffe); // P_adp_pass = 0
+			dib8000_write_word(state, 265, 15);	// P_equal_noise_sel = 15
+		}
+	} else if (state->isdbt_cfg_loaded == 0) {
+		dib8000_write_word(state, 228, 0);	// default value
+		dib8000_write_word(state, 265, 31);	// default value
+		dib8000_write_word(state, 205, 0x200f);	// init value
+	}
+	// ---- TMCC ----
+	for (i = 0; i < 3; i++)
+		tmcc_pow +=
+		    (((state->fe.dtv_property_cache.layer[i].modulation == DQPSK) * 4 + 1) * state->fe.dtv_property_cache.layer[i].segment_count);
+	// Quantif of "P_tmcc_dec_thres_?k" is (0, 5+mode, 9);
+	// Threshold is set at 1/4 of max power.
+	tmcc_pow *= (1 << (9 - 2));
+
+	dib8000_write_word(state, 290, tmcc_pow);	// P_tmcc_dec_thres_2k
+	dib8000_write_word(state, 291, tmcc_pow);	// P_tmcc_dec_thres_4k
+	dib8000_write_word(state, 292, tmcc_pow);	// P_tmcc_dec_thres_8k
+	//dib8000_write_word(state, 287, (1 << 13) | 0x1000 );
+	// ---- PHA3 ----
+
+	if (state->isdbt_cfg_loaded == 0)
+		dib8000_write_word(state, 250, 3285);	/*p_2d_hspeed_thr0 */
+
+	if (state->fe.dtv_property_cache.isdbt_sb_mode == 1)
+		state->isdbt_cfg_loaded = 0;
+	else
+		state->isdbt_cfg_loaded = 1;
+
+}
+
+static int dib8000_autosearch_start(struct dvb_frontend *fe)
+{
+	u8 factor;
+	u32 value;
+	struct dib8000_state *state = fe->demodulator_priv;
+
+	int slist = 0;
+
+	state->fe.dtv_property_cache.transmission_mode = TRANSMISSION_MODE_8K;
+	state->fe.dtv_property_cache.guard_interval = GUARD_INTERVAL_1_8;
+	//state->fe.dtv_property_cache.isdbt_sb_mode                = 0;
+	//state->fe.dtv_property_cache.isdbt_partial_reception      = 0;
+	state->fe.dtv_property_cache.inversion = 0;
+	if (!state->fe.dtv_property_cache.isdbt_sb_mode)
+		state->fe.dtv_property_cache.layer[0].segment_count = 13;
+	state->fe.dtv_property_cache.layer[0].modulation = QAM_64;
+	state->fe.dtv_property_cache.layer[0].fec = FEC_2_3;
+	state->fe.dtv_property_cache.layer[0].interleaving = 0;
+
+	//choose the right list, in sb, always do everything
+	if (state->fe.dtv_property_cache.isdbt_sb_mode) {
+		slist = 7;
+		dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x9fff) | (1 << 13));
+	} else {
+		if (state->fe.dtv_property_cache.guard_interval == GUARD_INTERVAL_AUTO) {
+			if (state->fe.dtv_property_cache.transmission_mode == TRANSMISSION_MODE_AUTO) {
+				slist = 7;
+				dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x9fff) | (1 << 13));	// P_mode = 1 to have autosearch start ok with mode2
+			} else {
+				slist = 3;
+				state->fe.dtv_property_cache.transmission_mode = state->fe.dtv_property_cache.transmission_mode;
+			}
+		} else {
+			if (state->fe.dtv_property_cache.transmission_mode == TRANSMISSION_MODE_AUTO) {
+				slist = 2;
+				state->fe.dtv_property_cache.guard_interval = state->fe.dtv_property_cache.guard_interval;
+				dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x9fff) | (1 << 13));	// P_mode = 1
+			} else {
+				slist = 0;
+				state->fe.dtv_property_cache.transmission_mode = state->fe.dtv_property_cache.transmission_mode;
+				state->fe.dtv_property_cache.guard_interval = state->fe.dtv_property_cache.guard_interval;
+			}
+		}
+
+		dprintk("using list for autosearch : %d", slist);
+		dib8000_set_channel(state, (unsigned char)slist, 1);
+		//dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x9fff) | (1 << 13));  // P_mode = 1
+
+		factor = 1;
+
+		//set lock_mask values
+		dib8000_write_word(state, 6, 0x4);
+		dib8000_write_word(state, 7, 0x8);
+		dib8000_write_word(state, 8, 0x1000);
+
+		//set lock_mask wait time values
+		value = 50 * state->cfg.pll->internal * factor;
+		dib8000_write_word(state, 11, (u16) ((value >> 16) & 0xffff));	// lock0 wait time
+		dib8000_write_word(state, 12, (u16) (value & 0xffff));	// lock0 wait time
+		value = 100 * state->cfg.pll->internal * factor;
+		dib8000_write_word(state, 13, (u16) ((value >> 16) & 0xffff));	// lock1 wait time
+		dib8000_write_word(state, 14, (u16) (value & 0xffff));	// lock1 wait time
+		value = 1000 * state->cfg.pll->internal * factor;
+		dib8000_write_word(state, 15, (u16) ((value >> 16) & 0xffff));	// lock2 wait time
+		dib8000_write_word(state, 16, (u16) (value & 0xffff));	// lock2 wait time
+
+		value = dib8000_read_word(state, 0);
+		dib8000_write_word(state, 0, (u16) ((1 << 15) | value));
+		dib8000_read_word(state, 1284);	// reset the INT. n_irq_pending
+		dib8000_write_word(state, 0, (u16) value);
+	}
+
+	return 0;
+}
+
+static int dib8000_autosearch_irq(struct dvb_frontend *fe)
+{
+	struct dib8000_state *state = fe->demodulator_priv;
+	u16 irq_pending = dib8000_read_word(state, 1284);
+
+	if (irq_pending & 0x1) {	// failed
+		dprintk("dib8000_autosearch_irq failed");
+		return 1;
+	}
+
+	if (irq_pending & 0x2) {	// succeeded
+		dprintk("dib8000_autosearch_irq succeeded");
+		return 2;
+	}
+
+	return 0;		// still pending
+}
+
+static int dib8000_tune(struct dvb_frontend *fe)
+{
+	struct dib8000_state *state = fe->demodulator_priv;
+	int ret = 0;
+	u16 value, mode = fft_to_mode(state);
+
+	// we are already tuned - just resuming from suspend
+	if (state == NULL)
+		return -EINVAL;
+
+	dib8000_set_bandwidth(state, state->fe.dtv_property_cache.bandwidth_hz / 1000);
+	dib8000_set_channel(state, 0, 0);
+
+	// restart demod
+	ret |= dib8000_write_word(state, 770, 0x4000);
+	ret |= dib8000_write_word(state, 770, 0x0000);
+	msleep(45);
+
+	/* P_ctrl_inh_cor=0, P_ctrl_alpha_cor=4, P_ctrl_inh_isi=0, P_ctrl_alpha_isi=3 */
+	/*  ret |= dib8000_write_word(state, 29, (0 << 9) | (4 << 5) | (0 << 4) | (3 << 0) );  workaround inh_isi stays at 1 */
+
+	// never achieved a lock before - wait for timfreq to update
+	if (state->timf == 0) {
+		if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) {
+			if (state->fe.dtv_property_cache.isdbt_partial_reception == 0)	// Sound Broadcasting mode 1 seg
+				msleep(300);
+			else	// Sound Broadcasting mode 3 seg
+				msleep(500);
+		} else		// 13 seg
+			msleep(200);
+	}
+	//dump_reg(state);
+	if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) {
+		if (state->fe.dtv_property_cache.isdbt_partial_reception == 0) {	// Sound Broadcasting mode 1 seg
+
+			/* P_timf_alpha = (13-P_mode) , P_corm_alpha=6, P_corm_thres=0x40  alpha to check on board */
+			dib8000_write_word(state, 32, ((13 - mode) << 12) | (6 << 8) | 0x40);
+			//dib8000_write_word(state, 32, (8 << 12) | (6 << 8) | 0x80);
+
+			/*  P_ctrl_sfreq_step= (12-P_mode)   P_ctrl_sfreq_inh =0     P_ctrl_pha_off_max  */
+			ret |= dib8000_write_word(state, 37, (12 - mode) | ((5 + mode) << 5));
+
+		} else {	// Sound Broadcasting mode 3 seg
+
+			/* P_timf_alpha = (12-P_mode) , P_corm_alpha=6, P_corm_thres=0x60  alpha to check on board */
+			dib8000_write_word(state, 32, ((12 - mode) << 12) | (6 << 8) | 0x60);
+
+			ret |= dib8000_write_word(state, 37, (11 - mode) | ((5 + mode) << 5));
+		}
+
+	} else {		// 13 seg
+		/* P_timf_alpha = 8 , P_corm_alpha=6, P_corm_thres=0x80  alpha to check on board */
+		dib8000_write_word(state, 32, ((11 - mode) << 12) | (6 << 8) | 0x80);
+
+		ret |= dib8000_write_word(state, 37, (10 - mode) | ((5 + mode) << 5));
+
+	}
+
+	// we achieved a coff_cpil_lock - it's time to update the timf
+	if ((dib8000_read_word(state, 568) >> 11) & 0x1)
+		dib8000_update_timf(state);
+
+	//now that tune is finished, lock0 should lock on fec_mpeg to output this lock on MP_LOCK. It's changed in autosearch start
+	dib8000_write_word(state, 6, 0x200);
+
+	if (state->revision == 0x8002) {
+		value = dib8000_read_word(state, 903);
+		dib8000_write_word(state, 903, value & ~(1 << 3));
+		msleep(1);
+		dib8000_write_word(state, 903, value | (1 << 3));
+	}
+
+	return ret;
+}
+
+static int dib8000_wakeup(struct dvb_frontend *fe)
+{
+	struct dib8000_state *state = fe->demodulator_priv;
+
+	dib8000_set_power_mode(state, DIB8000M_POWER_ALL);
+	dib8000_set_adc_state(state, DIBX000_ADC_ON);
+	if (dib8000_set_adc_state(state, DIBX000_SLOW_ADC_ON) != 0)
+		dprintk("could not start Slow ADC");
+
+	return 0;
+}
+
+static int dib8000_sleep(struct dvb_frontend *fe)
+{
+	struct dib8000_state *st = fe->demodulator_priv;
+	if (1) {
+		dib8000_set_output_mode(st, OUTMODE_HIGH_Z);
+		dib8000_set_power_mode(st, DIB8000M_POWER_INTERFACE_ONLY);
+		return dib8000_set_adc_state(st, DIBX000_SLOW_ADC_OFF) | dib8000_set_adc_state(st, DIBX000_ADC_OFF);
+	} else {
+
+		return 0;
+	}
+}
+
+static int dib8000_get_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *fep)
+{
+	struct dib8000_state *state = fe->demodulator_priv;
+	u16 i, val = 0;
+
+	fe->dtv_property_cache.bandwidth_hz = 6000000;
+
+	fe->dtv_property_cache.isdbt_sb_mode = dib8000_read_word(state, 508) & 0x1;
+
+	val = dib8000_read_word(state, 570);
+	fe->dtv_property_cache.inversion = (val & 0x40) >> 6;
+	switch ((val & 0x30) >> 4) {
+	case 1:
+		fe->dtv_property_cache.transmission_mode = TRANSMISSION_MODE_2K;
+		break;
+	case 3:
+	default:
+		fe->dtv_property_cache.transmission_mode = TRANSMISSION_MODE_8K;
+		break;
+	}
+
+	switch (val & 0x3) {
+	case 0:
+		fe->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_32;
+		dprintk("dib8000_get_frontend GI = 1/32 ");
+		break;
+	case 1:
+		fe->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_16;
+		dprintk("dib8000_get_frontend GI = 1/16 ");
+		break;
+	case 2:
+		dprintk("dib8000_get_frontend GI = 1/8 ");
+		fe->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_8;
+		break;
+	case 3:
+		dprintk("dib8000_get_frontend GI = 1/4 ");
+		fe->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_4;
+		break;
+	}
+
+	val = dib8000_read_word(state, 505);
+	fe->dtv_property_cache.isdbt_partial_reception = val & 1;
+	dprintk("dib8000_get_frontend : partial_reception = %d ", fe->dtv_property_cache.isdbt_partial_reception);
+
+	for (i = 0; i < 3; i++) {
+		val = dib8000_read_word(state, 493 + i);
+		fe->dtv_property_cache.layer[i].segment_count = val & 0x0F;
+		dprintk("dib8000_get_frontend : Layer %d segments = %d ", i, fe->dtv_property_cache.layer[i].segment_count);
+
+		val = dib8000_read_word(state, 499 + i);
+		fe->dtv_property_cache.layer[i].interleaving = val & 0x3;
+		dprintk("dib8000_get_frontend : Layer %d time_intlv = %d ", i, fe->dtv_property_cache.layer[i].interleaving);
+
+		val = dib8000_read_word(state, 481 + i);
+		switch (val & 0x7) {
+		case 1:
+			fe->dtv_property_cache.layer[i].fec = FEC_1_2;
+			dprintk("dib8000_get_frontend : Layer %d Code Rate = 1/2 ", i);
+			break;
+		case 2:
+			fe->dtv_property_cache.layer[i].fec = FEC_2_3;
+			dprintk("dib8000_get_frontend : Layer %d Code Rate = 2/3 ", i);
+			break;
+		case 3:
+			fe->dtv_property_cache.layer[i].fec = FEC_3_4;
+			dprintk("dib8000_get_frontend : Layer %d Code Rate = 3/4 ", i);
+			break;
+		case 5:
+			fe->dtv_property_cache.layer[i].fec = FEC_5_6;
+			dprintk("dib8000_get_frontend : Layer %d Code Rate = 5/6 ", i);
+			break;
+		default:
+			fe->dtv_property_cache.layer[i].fec = FEC_7_8;
+			dprintk("dib8000_get_frontend : Layer %d Code Rate = 7/8 ", i);
+			break;
+		}
+
+		val = dib8000_read_word(state, 487 + i);
+		switch (val & 0x3) {
+		case 0:
+			dprintk("dib8000_get_frontend : Layer %d DQPSK ", i);
+			fe->dtv_property_cache.layer[i].modulation = DQPSK;
+			break;
+		case 1:
+			fe->dtv_property_cache.layer[i].modulation = QPSK;
+			dprintk("dib8000_get_frontend : Layer %d QPSK ", i);
+			break;
+		case 2:
+			fe->dtv_property_cache.layer[i].modulation = QAM_16;
+			dprintk("dib8000_get_frontend : Layer %d QAM16 ", i);
+			break;
+		case 3:
+		default:
+			dprintk("dib8000_get_frontend : Layer %d QAM64 ", i);
+			fe->dtv_property_cache.layer[i].modulation = QAM_64;
+			break;
+		}
+	}
+	return 0;
+}
+
+static int dib8000_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *fep)
+{
+	struct dib8000_state *state = fe->demodulator_priv;
+	int time, ret;
+
+	dib8000_set_output_mode(state, OUTMODE_HIGH_Z);
+
+	if (fe->ops.tuner_ops.set_params)
+		fe->ops.tuner_ops.set_params(fe, fep);
+
+	/* start up the AGC */
+	state->tune_state = CT_AGC_START;
+	do {
+		time = dib8000_agc_startup(fe);
+		if (time != FE_CALLBACK_TIME_NEVER)
+			msleep(time / 10);
+		else
+			break;
+	} while (state->tune_state != CT_AGC_STOP);
+
+	if (state->fe.dtv_property_cache.frequency == 0) {
+		dprintk("dib8000: must at least specify frequency ");
+		return 0;
+	}
+
+	if (state->fe.dtv_property_cache.bandwidth_hz == 0) {
+		dprintk("dib8000: no bandwidth specified, set to default ");
+		state->fe.dtv_property_cache.bandwidth_hz = 6000000;
+	}
+
+	state->tune_state = CT_DEMOD_START;
+
+	if ((state->fe.dtv_property_cache.delivery_system != SYS_ISDBT) ||
+	    (state->fe.dtv_property_cache.inversion == INVERSION_AUTO) ||
+	    (state->fe.dtv_property_cache.transmission_mode == TRANSMISSION_MODE_AUTO) ||
+	    (state->fe.dtv_property_cache.guard_interval == GUARD_INTERVAL_AUTO) ||
+	    (((state->fe.dtv_property_cache.isdbt_layer_enabled & (1 << 0)) != 0) &&
+	     (state->fe.dtv_property_cache.layer[0].segment_count != 0xff) &&
+	     (state->fe.dtv_property_cache.layer[0].segment_count != 0) &&
+	     ((state->fe.dtv_property_cache.layer[0].modulation == QAM_AUTO) ||
+	      (state->fe.dtv_property_cache.layer[0].fec == FEC_AUTO))) ||
+	    (((state->fe.dtv_property_cache.isdbt_layer_enabled & (1 << 1)) != 0) &&
+	     (state->fe.dtv_property_cache.layer[1].segment_count != 0xff) &&
+	     (state->fe.dtv_property_cache.layer[1].segment_count != 0) &&
+	     ((state->fe.dtv_property_cache.layer[1].modulation == QAM_AUTO) ||
+	      (state->fe.dtv_property_cache.layer[1].fec == FEC_AUTO))) ||
+	    (((state->fe.dtv_property_cache.isdbt_layer_enabled & (1 << 2)) != 0) &&
+	     (state->fe.dtv_property_cache.layer[2].segment_count != 0xff) &&
+	     (state->fe.dtv_property_cache.layer[2].segment_count != 0) &&
+	     ((state->fe.dtv_property_cache.layer[2].modulation == QAM_AUTO) ||
+	      (state->fe.dtv_property_cache.layer[2].fec == FEC_AUTO))) ||
+	    (((state->fe.dtv_property_cache.layer[0].segment_count == 0) ||
+	      ((state->fe.dtv_property_cache.isdbt_layer_enabled & (1 << 0)) == 0)) &&
+	     ((state->fe.dtv_property_cache.layer[1].segment_count == 0) ||
+	      ((state->fe.dtv_property_cache.isdbt_layer_enabled & (2 << 0)) == 0)) &&
+	     ((state->fe.dtv_property_cache.layer[2].segment_count == 0) || ((state->fe.dtv_property_cache.isdbt_layer_enabled & (3 << 0)) == 0)))) {
+		int i = 800, found;
+
+		dib8000_set_bandwidth(state, fe->dtv_property_cache.bandwidth_hz / 1000);
+		dib8000_autosearch_start(fe);
+		do {
+			msleep(10);
+			found = dib8000_autosearch_irq(fe);
+		} while (found == 0 && i--);
+
+		dprintk("Frequency %d Hz, autosearch returns: %d", fep->frequency, found);
+
+		if (found == 0 || found == 1)
+			return 0;	// no channel found
+
+		dib8000_get_frontend(fe, fep);
+	}
+
+	ret = dib8000_tune(fe);
+
+	/* make this a config parameter */
+	dib8000_set_output_mode(state, state->cfg.output_mode);
+
+	return ret;
+}
+
+static int dib8000_read_status(struct dvb_frontend *fe, fe_status_t * stat)
+{
+	struct dib8000_state *state = fe->demodulator_priv;
+	u16 lock = dib8000_read_word(state, 568);
+
+	*stat = 0;
+
+	if ((lock >> 14) & 1)	// AGC
+		*stat |= FE_HAS_SIGNAL;
+
+	if ((lock >> 8) & 1)	// Equal
+		*stat |= FE_HAS_CARRIER;
+
+	if ((lock >> 3) & 1)	// TMCC_SYNC
+		*stat |= FE_HAS_SYNC;
+
+	if ((lock >> 5) & 7)	// FEC MPEG
+		*stat |= FE_HAS_LOCK;
+
+	lock = dib8000_read_word(state, 554);	// Viterbi Layer A
+	if (lock & 0x01)
+		*stat |= FE_HAS_VITERBI;
+
+	lock = dib8000_read_word(state, 555);	// Viterbi Layer B
+	if (lock & 0x01)
+		*stat |= FE_HAS_VITERBI;
+
+	lock = dib8000_read_word(state, 556);	// Viterbi Layer C
+	if (lock & 0x01)
+		*stat |= FE_HAS_VITERBI;
+
+	return 0;
+}
+
+static int dib8000_read_ber(struct dvb_frontend *fe, u32 * ber)
+{
+	struct dib8000_state *state = fe->demodulator_priv;
+	*ber = (dib8000_read_word(state, 560) << 16) | dib8000_read_word(state, 561);	// 13 segments
+	return 0;
+}
+
+static int dib8000_read_unc_blocks(struct dvb_frontend *fe, u32 * unc)
+{
+	struct dib8000_state *state = fe->demodulator_priv;
+	*unc = dib8000_read_word(state, 565);	// packet error on 13 seg
+	return 0;
+}
+
+static int dib8000_read_signal_strength(struct dvb_frontend *fe, u16 * strength)
+{
+	struct dib8000_state *state = fe->demodulator_priv;
+	u16 val = dib8000_read_word(state, 390);
+	*strength = 65535 - val;
+	return 0;
+}
+
+static int dib8000_read_snr(struct dvb_frontend *fe, u16 * snr)
+{
+	struct dib8000_state *state = fe->demodulator_priv;
+	u16 val;
+	s32 signal_mant, signal_exp, noise_mant, noise_exp;
+	u32 result = 0;
+
+	val = dib8000_read_word(state, 542);
+	noise_mant = (val >> 6) & 0xff;
+	noise_exp = (val & 0x3f);
+
+	val = dib8000_read_word(state, 543);
+	signal_mant = (val >> 6) & 0xff;
+	signal_exp = (val & 0x3f);
+
+	if ((noise_exp & 0x20) != 0)
+		noise_exp -= 0x40;
+	if ((signal_exp & 0x20) != 0)
+		signal_exp -= 0x40;
+
+	if (signal_mant != 0)
+		result = intlog10(2) * 10 * signal_exp + 10 * intlog10(signal_mant);
+	else
+		result = intlog10(2) * 10 * signal_exp - 100;
+	if (noise_mant != 0)
+		result -= intlog10(2) * 10 * noise_exp + 10 * intlog10(noise_mant);
+	else
+		result -= intlog10(2) * 10 * noise_exp - 100;
+
+	*snr = result / (1 << 24);
+	return 0;
+}
+
+int dib8000_i2c_enumeration(struct i2c_adapter *host, int no_of_demods, u8 default_addr, u8 first_addr)
+{
+	int k = 0;
+	u8 new_addr = 0;
+	struct i2c_device client = {.adap = host };
+
+	for (k = no_of_demods - 1; k >= 0; k--) {
+		/* designated i2c address */
+		new_addr = first_addr + (k << 1);
+
+		client.addr = new_addr;
+		dib8000_i2c_write16(&client, 1287, 0x0003);	/* sram lead in, rdy */
+		if (dib8000_identify(&client) == 0) {
+			dib8000_i2c_write16(&client, 1287, 0x0003);	/* sram lead in, rdy */
+			client.addr = default_addr;
+			if (dib8000_identify(&client) == 0) {
+				dprintk("#%d: not identified", k);
+				return -EINVAL;
+			}
+		}
+
+		/* start diversity to pull_down div_str - just for i2c-enumeration */
+		dib8000_i2c_write16(&client, 1286, (1 << 10) | (4 << 6));
+
+		/* set new i2c address and force divstart */
+		dib8000_i2c_write16(&client, 1285, (new_addr << 2) | 0x2);
+		client.addr = new_addr;
+		dib8000_identify(&client);
+
+		dprintk("IC %d initialized (to i2c_address 0x%x)", k, new_addr);
+	}
+
+	for (k = 0; k < no_of_demods; k++) {
+		new_addr = first_addr | (k << 1);
+		client.addr = new_addr;
+
+		// unforce divstr
+		dib8000_i2c_write16(&client, 1285, new_addr << 2);
+
+		/* deactivate div - it was just for i2c-enumeration */
+		dib8000_i2c_write16(&client, 1286, 0);
+	}
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dib8000_i2c_enumeration);
+static int dib8000_fe_get_tune_settings(struct dvb_frontend *fe, struct dvb_frontend_tune_settings *tune)
+{
+	tune->min_delay_ms = 1000;
+	tune->step_size = 0;
+	tune->max_drift = 0;
+	return 0;
+}
+
+static void dib8000_release(struct dvb_frontend *fe)
+{
+	struct dib8000_state *st = fe->demodulator_priv;
+	dibx000_exit_i2c_master(&st->i2c_master);
+	kfree(st);
+}
+
+struct i2c_adapter *dib8000_get_i2c_master(struct dvb_frontend *fe, enum dibx000_i2c_interface intf, int gating)
+{
+	struct dib8000_state *st = fe->demodulator_priv;
+	return dibx000_get_i2c_adapter(&st->i2c_master, intf, gating);
+}
+
+EXPORT_SYMBOL(dib8000_get_i2c_master);
+
+static const struct dvb_frontend_ops dib8000_ops = {
+	.info = {
+		 .name = "DiBcom 8000 ISDB-T",
+		 .type = FE_OFDM,
+		 .frequency_min = 44250000,
+		 .frequency_max = 867250000,
+		 .frequency_stepsize = 62500,
+		 .caps = FE_CAN_INVERSION_AUTO |
+		 FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+		 FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+		 FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
+		 FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_RECOVER | FE_CAN_HIERARCHY_AUTO,
+		 },
+
+	.release = dib8000_release,
+
+	.init = dib8000_wakeup,
+	.sleep = dib8000_sleep,
+
+	.set_frontend = dib8000_set_frontend,
+	.get_tune_settings = dib8000_fe_get_tune_settings,
+	.get_frontend = dib8000_get_frontend,
+
+	.read_status = dib8000_read_status,
+	.read_ber = dib8000_read_ber,
+	.read_signal_strength = dib8000_read_signal_strength,
+	.read_snr = dib8000_read_snr,
+	.read_ucblocks = dib8000_read_unc_blocks,
+};
+
+struct dvb_frontend *dib8000_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib8000_config *cfg)
+{
+	struct dvb_frontend *fe;
+	struct dib8000_state *state;
+
+	dprintk("dib8000_attach");
+
+	state = kzalloc(sizeof(struct dib8000_state), GFP_KERNEL);
+	if (state == NULL)
+		return NULL;
+
+	memcpy(&state->cfg, cfg, sizeof(struct dib8000_config));
+	state->i2c.adap = i2c_adap;
+	state->i2c.addr = i2c_addr;
+	state->gpio_val = cfg->gpio_val;
+	state->gpio_dir = cfg->gpio_dir;
+
+	/* Ensure the output mode remains at the previous default if it's
+	 * not specifically set by the caller.
+	 */
+	if ((state->cfg.output_mode != OUTMODE_MPEG2_SERIAL) && (state->cfg.output_mode != OUTMODE_MPEG2_PAR_GATED_CLK))
+		state->cfg.output_mode = OUTMODE_MPEG2_FIFO;
+
+	fe = &state->fe;
+	fe->demodulator_priv = state;
+	memcpy(&state->fe.ops, &dib8000_ops, sizeof(struct dvb_frontend_ops));
+
+	state->timf_default = cfg->pll->timf;
+
+	if (dib8000_identify(&state->i2c) == 0)
+		goto error;
+
+	dibx000_init_i2c_master(&state->i2c_master, DIB8000, state->i2c.adap, state->i2c.addr);
+
+	dib8000_reset(fe);
+
+	dib8000_write_word(state, 285, (dib8000_read_word(state, 285) & ~0x60) | (3 << 5));	/* ber_rs_len = 3 */
+
+	return fe;
+
+ error:
+	kfree(state);
+	return NULL;
+}
+
+EXPORT_SYMBOL(dib8000_attach);
+
+MODULE_AUTHOR("Olivier Grenie <Olivier.Grenie@dibcom.fr, " "Patrick Boettcher <pboettcher@dibcom.fr>");
+MODULE_DESCRIPTION("Driver for the DiBcom 8000 ISDB-T demodulator");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/dib8000.h b/drivers/media/dvb/frontends/dib8000.h
new file mode 100644
index 00000000000..a86de340dd5
--- /dev/null
+++ b/drivers/media/dvb/frontends/dib8000.h
@@ -0,0 +1,79 @@
+#ifndef DIB8000_H
+#define DIB8000_H
+
+#include "dibx000_common.h"
+
+struct dib8000_config {
+	u8 output_mpeg2_in_188_bytes;
+	u8 hostbus_diversity;
+	u8 tuner_is_baseband;
+	int (*update_lna) (struct dvb_frontend *, u16 agc_global);
+
+	u8 agc_config_count;
+	struct dibx000_agc_config *agc;
+	struct dibx000_bandwidth_config *pll;
+
+#define DIB8000_GPIO_DEFAULT_DIRECTIONS 0xffff
+	u16 gpio_dir;
+#define DIB8000_GPIO_DEFAULT_VALUES     0x0000
+	u16 gpio_val;
+#define DIB8000_GPIO_PWM_POS0(v)        ((v & 0xf) << 12)
+#define DIB8000_GPIO_PWM_POS1(v)        ((v & 0xf) << 8 )
+#define DIB8000_GPIO_PWM_POS2(v)        ((v & 0xf) << 4 )
+#define DIB8000_GPIO_PWM_POS3(v)         (v & 0xf)
+#define DIB8000_GPIO_DEFAULT_PWM_POS    0xffff
+	u16 gpio_pwm_pos;
+	u16 pwm_freq_div;
+
+	void (*agc_control) (struct dvb_frontend *, u8 before);
+
+	u16 drives;
+	u16 diversity_delay;
+	u8 div_cfg;
+	u8 output_mode;
+	u8 refclksel;
+};
+
+#define DEFAULT_DIB8000_I2C_ADDRESS 18
+
+#if defined(CONFIG_DVB_DIB8000) || (defined(CONFIG_DVB_DIB8000_MODULE) && defined(MODULE))
+extern struct dvb_frontend *dib8000_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib8000_config *cfg);
+extern struct i2c_adapter *dib8000_get_i2c_master(struct dvb_frontend *, enum dibx000_i2c_interface, int);
+
+extern int dib8000_i2c_enumeration(struct i2c_adapter *host, int no_of_demods, u8 default_addr, u8 first_addr);
+
+extern int dib8000_set_gpio(struct dvb_frontend *, u8 num, u8 dir, u8 val);
+extern int dib8000_set_wbd_ref(struct dvb_frontend *, u16 value);
+#else
+static inline struct dvb_frontend *dib8000_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib8000_config *cfg)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+
+static inline struct i2c_adapter *dib8000_get_i2c_master(struct dvb_frontend *fe, enum dibx000_i2c_interface i, int x)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+
+int dib8000_i2c_enumeration(struct i2c_adapter *host, int no_of_demods, u8 default_addr, u8 first_addr)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return -ENODEV;
+}
+
+int dib8000_set_gpio(struct dvb_frontend *fe, u8 num, u8 dir, u8 val)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return -ENODEV;
+}
+
+int dib8000_set_wbd_ref(struct dvb_frontend *fe, u16 value)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return -ENODEV;
+}
+#endif
+
+#endif
diff --git a/drivers/media/dvb/frontends/dibx000_common.c b/drivers/media/dvb/frontends/dibx000_common.c
index 315e09e95b0..4efca30d212 100644
--- a/drivers/media/dvb/frontends/dibx000_common.c
+++ b/drivers/media/dvb/frontends/dibx000_common.c
@@ -15,29 +15,31 @@ static int dibx000_write_word(struct dibx000_i2c_master *mst, u16 reg, u16 val)
 		(val >> 8) & 0xff, val & 0xff,
 	};
 	struct i2c_msg msg = {
-		.addr = mst->i2c_addr, .flags = 0, .buf = b, .len = 4
+		.addr = mst->i2c_addr,.flags = 0,.buf = b,.len = 4
 	};
 	return i2c_transfer(mst->i2c_adap, &msg, 1) != 1 ? -EREMOTEIO : 0;
 }
 
 
-static int dibx000_i2c_select_interface(struct dibx000_i2c_master *mst, enum dibx000_i2c_interface intf)
+static int dibx000_i2c_select_interface(struct dibx000_i2c_master *mst,
+					enum dibx000_i2c_interface intf)
 {
 	if (mst->device_rev > DIB3000MC && mst->selected_interface != intf) {
-		dprintk("selecting interface: %d\n",intf);
+		dprintk("selecting interface: %d\n", intf);
 		mst->selected_interface = intf;
 		return dibx000_write_word(mst, mst->base_reg + 4, intf);
 	}
 	return 0;
 }
 
-static int dibx000_i2c_gate_ctrl(struct dibx000_i2c_master *mst, u8 tx[4], u8 addr, int onoff)
+static int dibx000_i2c_gate_ctrl(struct dibx000_i2c_master *mst, u8 tx[4],
+				 u8 addr, int onoff)
 {
 	u16 val;
 
 
 	if (onoff)
-		val = addr << 8; // bit 7 = use master or not, if 0, the gate is open
+		val = addr << 8;	// bit 7 = use master or not, if 0, the gate is open
 	else
 		val = 1 << 7;
 
@@ -45,7 +47,7 @@ static int dibx000_i2c_gate_ctrl(struct dibx000_i2c_master *mst, u8 tx[4], u8 ad
 		val <<= 1;
 
 	tx[0] = (((mst->base_reg + 1) >> 8) & 0xff);
-	tx[1] = ( (mst->base_reg + 1)       & 0xff);
+	tx[1] = ((mst->base_reg + 1) & 0xff);
 	tx[2] = val >> 8;
 	tx[3] = val & 0xff;
 
@@ -57,59 +59,78 @@ static u32 dibx000_i2c_func(struct i2c_adapter *adapter)
 	return I2C_FUNC_I2C;
 }
 
-static int dibx000_i2c_gated_tuner_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msg[], int num)
+static int dibx000_i2c_gated_tuner_xfer(struct i2c_adapter *i2c_adap,
+					struct i2c_msg msg[], int num)
 {
 	struct dibx000_i2c_master *mst = i2c_get_adapdata(i2c_adap);
 	struct i2c_msg m[2 + num];
 	u8 tx_open[4], tx_close[4];
 
-	memset(m,0, sizeof(struct i2c_msg) * (2 + num));
+	memset(m, 0, sizeof(struct i2c_msg) * (2 + num));
 
 	dibx000_i2c_select_interface(mst, DIBX000_I2C_INTERFACE_TUNER);
 
-	dibx000_i2c_gate_ctrl(mst, tx_open,  msg[0].addr, 1);
+	dibx000_i2c_gate_ctrl(mst, tx_open, msg[0].addr, 1);
 	m[0].addr = mst->i2c_addr;
-	m[0].buf  = tx_open;
-	m[0].len  = 4;
+	m[0].buf = tx_open;
+	m[0].len = 4;
 
 	memcpy(&m[1], msg, sizeof(struct i2c_msg) * num);
 
 	dibx000_i2c_gate_ctrl(mst, tx_close, 0, 0);
-	m[num+1].addr = mst->i2c_addr;
-	m[num+1].buf  = tx_close;
-	m[num+1].len  = 4;
+	m[num + 1].addr = mst->i2c_addr;
+	m[num + 1].buf = tx_close;
+	m[num + 1].len = 4;
 
-	return i2c_transfer(mst->i2c_adap, m, 2+num) == 2 + num ? num : -EIO;
+	return i2c_transfer(mst->i2c_adap, m, 2 + num) == 2 + num ? num : -EIO;
 }
 
 static struct i2c_algorithm dibx000_i2c_gated_tuner_algo = {
-	.master_xfer   = dibx000_i2c_gated_tuner_xfer,
+	.master_xfer = dibx000_i2c_gated_tuner_xfer,
 	.functionality = dibx000_i2c_func,
 };
 
-struct i2c_adapter * dibx000_get_i2c_adapter(struct dibx000_i2c_master *mst, enum dibx000_i2c_interface intf, int gating)
+struct i2c_adapter *dibx000_get_i2c_adapter(struct dibx000_i2c_master *mst,
+					    enum dibx000_i2c_interface intf,
+					    int gating)
 {
 	struct i2c_adapter *i2c = NULL;
 
 	switch (intf) {
-		case DIBX000_I2C_INTERFACE_TUNER:
-			if (gating)
-				i2c = &mst->gated_tuner_i2c_adap;
-			break;
-		default:
-			printk(KERN_ERR "DiBX000: incorrect I2C interface selected\n");
-			break;
+	case DIBX000_I2C_INTERFACE_TUNER:
+		if (gating)
+			i2c = &mst->gated_tuner_i2c_adap;
+		break;
+	default:
+		printk(KERN_ERR "DiBX000: incorrect I2C interface selected\n");
+		break;
 	}
 
 	return i2c;
 }
+
 EXPORT_SYMBOL(dibx000_get_i2c_adapter);
 
-static int i2c_adapter_init(struct i2c_adapter *i2c_adap, struct i2c_algorithm *algo, const char *name, struct dibx000_i2c_master *mst)
+void dibx000_reset_i2c_master(struct dibx000_i2c_master *mst)
+{
+	/* initialize the i2c-master by closing the gate */
+	u8 tx[4];
+	struct i2c_msg m = {.addr = mst->i2c_addr,.buf = tx,.len = 4 };
+
+	dibx000_i2c_gate_ctrl(mst, tx, 0, 0);
+	i2c_transfer(mst->i2c_adap, &m, 1);
+	mst->selected_interface = 0xff;	// the first time force a select of the I2C
+	dibx000_i2c_select_interface(mst, DIBX000_I2C_INTERFACE_TUNER);
+}
+
+EXPORT_SYMBOL(dibx000_reset_i2c_master);
+
+static int i2c_adapter_init(struct i2c_adapter *i2c_adap,
+			    struct i2c_algorithm *algo, const char *name,
+			    struct dibx000_i2c_master *mst)
 {
 	strncpy(i2c_adap->name, name, sizeof(i2c_adap->name));
-	i2c_adap->class     = I2C_CLASS_TV_DIGITAL,
-	i2c_adap->algo      = algo;
+	i2c_adap->class = I2C_CLASS_TV_DIGITAL, i2c_adap->algo = algo;
 	i2c_adap->algo_data = NULL;
 	i2c_set_adapdata(i2c_adap, mst);
 	if (i2c_add_adapter(i2c_adap) < 0)
@@ -117,34 +138,40 @@ static int i2c_adapter_init(struct i2c_adapter *i2c_adap, struct i2c_algorithm *
 	return 0;
 }
 
-int dibx000_init_i2c_master(struct dibx000_i2c_master *mst, u16 device_rev, struct i2c_adapter *i2c_adap, u8 i2c_addr)
+int dibx000_init_i2c_master(struct dibx000_i2c_master *mst, u16 device_rev,
+			    struct i2c_adapter *i2c_adap, u8 i2c_addr)
 {
 	u8 tx[4];
-	struct i2c_msg m = { .addr = i2c_addr >> 1, .buf = tx, .len = 4 };
+	struct i2c_msg m = {.addr = i2c_addr >> 1,.buf = tx,.len = 4 };
 
 	mst->device_rev = device_rev;
-	mst->i2c_adap   = i2c_adap;
-	mst->i2c_addr   = i2c_addr >> 1;
+	mst->i2c_adap = i2c_adap;
+	mst->i2c_addr = i2c_addr >> 1;
 
-	if (device_rev == DIB7000P)
+	if (device_rev == DIB7000P || device_rev == DIB8000)
 		mst->base_reg = 1024;
 	else
 		mst->base_reg = 768;
 
-    if (i2c_adapter_init(&mst->gated_tuner_i2c_adap, &dibx000_i2c_gated_tuner_algo, "DiBX000 tuner I2C bus", mst) != 0)
-		printk(KERN_ERR "DiBX000: could not initialize the tuner i2c_adapter\n");
+	if (i2c_adapter_init
+	    (&mst->gated_tuner_i2c_adap, &dibx000_i2c_gated_tuner_algo,
+	     "DiBX000 tuner I2C bus", mst) != 0)
+		printk(KERN_ERR
+		       "DiBX000: could not initialize the tuner i2c_adapter\n");
 
 	/* initialize the i2c-master by closing the gate */
 	dibx000_i2c_gate_ctrl(mst, tx, 0, 0);
 
 	return i2c_transfer(i2c_adap, &m, 1) == 1;
 }
+
 EXPORT_SYMBOL(dibx000_init_i2c_master);
 
 void dibx000_exit_i2c_master(struct dibx000_i2c_master *mst)
 {
 	i2c_del_adapter(&mst->gated_tuner_i2c_adap);
 }
+
 EXPORT_SYMBOL(dibx000_exit_i2c_master);
 
 MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>");
diff --git a/drivers/media/dvb/frontends/dibx000_common.h b/drivers/media/dvb/frontends/dibx000_common.h
index 84e4d536292..5be10eca07c 100644
--- a/drivers/media/dvb/frontends/dibx000_common.h
+++ b/drivers/media/dvb/frontends/dibx000_common.h
@@ -2,7 +2,7 @@
 #define DIBX000_COMMON_H
 
 enum dibx000_i2c_interface {
-	DIBX000_I2C_INTERFACE_TUNER    = 0,
+	DIBX000_I2C_INTERFACE_TUNER = 0,
 	DIBX000_I2C_INTERFACE_GPIO_1_2 = 1,
 	DIBX000_I2C_INTERFACE_GPIO_3_4 = 2
 };
@@ -12,22 +12,29 @@ struct dibx000_i2c_master {
 #define DIB7000   2
 #define DIB7000P  11
 #define DIB7000MC 12
+#define DIB8000   13
 	u16 device_rev;
 
 	enum dibx000_i2c_interface selected_interface;
 
-//	struct i2c_adapter  tuner_i2c_adap;
-	struct i2c_adapter  gated_tuner_i2c_adap;
+//      struct i2c_adapter  tuner_i2c_adap;
+	struct i2c_adapter gated_tuner_i2c_adap;
 
 	struct i2c_adapter *i2c_adap;
-	u8                  i2c_addr;
+	u8 i2c_addr;
 
 	u16 base_reg;
 };
 
-extern int dibx000_init_i2c_master(struct dibx000_i2c_master *mst, u16 device_rev, struct i2c_adapter *i2c_adap, u8 i2c_addr);
-extern struct i2c_adapter * dibx000_get_i2c_adapter(struct dibx000_i2c_master *mst, enum dibx000_i2c_interface intf, int gating);
+extern int dibx000_init_i2c_master(struct dibx000_i2c_master *mst,
+				   u16 device_rev, struct i2c_adapter *i2c_adap,
+				   u8 i2c_addr);
+extern struct i2c_adapter *dibx000_get_i2c_adapter(struct dibx000_i2c_master
+						   *mst,
+						   enum dibx000_i2c_interface
+						   intf, int gating);
 extern void dibx000_exit_i2c_master(struct dibx000_i2c_master *mst);
+extern void dibx000_reset_i2c_master(struct dibx000_i2c_master *mst);
 
 #define BAND_LBAND 0x01
 #define BAND_UHF   0x02
@@ -41,18 +48,18 @@ extern void dibx000_exit_i2c_master(struct dibx000_i2c_master *mst);
 									(freq_kHz) <= 2000000 ? BAND_LBAND : BAND_SBAND )
 
 struct dibx000_agc_config {
-	/* defines the capabilities of this AGC-setting - using the BAND_-defines*/
-	u8  band_caps;
+	/* defines the capabilities of this AGC-setting - using the BAND_-defines */
+	u8 band_caps;
 
 	u16 setup;
 
 	u16 inv_gain;
 	u16 time_stabiliz;
 
-	u8  alpha_level;
+	u8 alpha_level;
 	u16 thlock;
 
-	u8  wbd_inv;
+	u8 wbd_inv;
 	u16 wbd_ref;
 	u8 wbd_sel;
 	u8 wbd_alpha;
@@ -92,8 +99,8 @@ struct dibx000_agc_config {
 };
 
 struct dibx000_bandwidth_config {
-	u32   internal;
-	u32   sampling;
+	u32 internal;
+	u32 sampling;
 
 	u8 pll_prediv;
 	u8 pll_ratio;
-- 
cgit v1.2.3


From ba3fe3a96374ff209f532a4924743bb1fa4d57f6 Mon Sep 17 00:00:00 2001
From: Patrick Boettcher <pboettcher@dibcom.fr>
Date: Wed, 16 Sep 2009 09:51:30 -0300
Subject: V4L/DVB (12901): DiB0700: add support for STK807XP and STK807XPVR

This patchs adds support for the DiB8000 based devices STK807xP and
STK807xPVR to the dib0700-device-tree.

[mchehab@redhat.com: Fix merge conflicts]

Signed-off-by: Olivier Grenie <Olivier.Grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/dvb-usb/dib0700_devices.c | 367 +++++++++++++++++++++++++++-
 drivers/media/dvb/dvb-usb/dvb-usb-ids.h     |   2 +
 2 files changed, 368 insertions(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index 10ade261b0a..442afbaabee 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -4,13 +4,14 @@
  *	under the terms of the GNU General Public License as published by the Free
  *	Software Foundation, version 2.
  *
- *  Copyright (C) 2005-7 DiBcom, SA
+ *  Copyright (C) 2005-9 DiBcom, SA et al
  */
 #include "dib0700.h"
 
 #include "dib3000mc.h"
 #include "dib7000m.h"
 #include "dib7000p.h"
+#include "dib8000.h"
 #include "mt2060.h"
 #include "mt2266.h"
 #include "tuner-xc2028.h"
@@ -1268,6 +1269,306 @@ static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap)
 	return adap->fe == NULL ? -ENODEV : 0;
 }
 
+/* DIB807x generic */
+static struct dibx000_agc_config dib807x_agc_config[2] = {
+	{
+		BAND_VHF,
+		/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
+		 * P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
+		 * P_agc_inv_pwm2=0,P_agc_inh_dc_rv_est=0,
+		 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
+		 * P_agc_write=0 */
+		(0 << 15) | (0 << 14) | (7 << 11) | (0 << 10) | (0 << 9) |
+			(0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) |
+			(0 << 0), /* setup*/
+
+		600, /* inv_gain*/
+		10,  /* time_stabiliz*/
+
+		0,  /* alpha_level*/
+		118,  /* thlock*/
+
+		0,     /* wbd_inv*/
+		3530,  /* wbd_ref*/
+		1,     /* wbd_sel*/
+		5,     /* wbd_alpha*/
+
+		65535,  /* agc1_max*/
+		0,  /* agc1_min*/
+
+		65535,  /* agc2_max*/
+		0,      /* agc2_min*/
+
+		0,      /* agc1_pt1*/
+		40,     /* agc1_pt2*/
+		183,    /* agc1_pt3*/
+		206,    /* agc1_slope1*/
+		255,    /* agc1_slope2*/
+		72,     /* agc2_pt1*/
+		152,    /* agc2_pt2*/
+		88,     /* agc2_slope1*/
+		90,     /* agc2_slope2*/
+
+		17,  /* alpha_mant*/
+		27,  /* alpha_exp*/
+		23,  /* beta_mant*/
+		51,  /* beta_exp*/
+
+		0,  /* perform_agc_softsplit*/
+	}, {
+		BAND_UHF,
+		/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
+		 * P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
+		 * P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
+		 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
+		 * P_agc_write=0 */
+		(0 << 15) | (0 << 14) | (1 << 11) | (0 << 10) | (0 << 9) |
+			(0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) |
+			(0 << 0), /* setup */
+
+		600, /* inv_gain*/
+		10,  /* time_stabiliz*/
+
+		0,  /* alpha_level*/
+		118,  /* thlock*/
+
+		0,     /* wbd_inv*/
+		3530,  /* wbd_ref*/
+		1,     /* wbd_sel*/
+		5,     /* wbd_alpha*/
+
+		65535,  /* agc1_max*/
+		0,  /* agc1_min*/
+
+		65535,  /* agc2_max*/
+		0,      /* agc2_min*/
+
+		0,      /* agc1_pt1*/
+		40,     /* agc1_pt2*/
+		183,    /* agc1_pt3*/
+		206,    /* agc1_slope1*/
+		255,    /* agc1_slope2*/
+		72,     /* agc2_pt1*/
+		152,    /* agc2_pt2*/
+		88,     /* agc2_slope1*/
+		90,     /* agc2_slope2*/
+
+		17,  /* alpha_mant*/
+		27,  /* alpha_exp*/
+		23,  /* beta_mant*/
+		51,  /* beta_exp*/
+
+		0,  /* perform_agc_softsplit*/
+	}
+};
+
+static struct dibx000_bandwidth_config dib807x_bw_config_12_mhz = {
+	60000, 15000, /* internal, sampling*/
+	1, 20, 3, 1, 0, /* pll_cfg: prediv, ratio, range, reset, bypass*/
+	0, 0, 1, 1, 2, /* misc: refdiv, bypclk_div, IO_CLK_en_core,
+			  ADClkSrc, modulo */
+	(3 << 14) | (1 << 12) | (599 << 0), /* sad_cfg: refsel, sel, freq_15k*/
+	(0 << 25) | 0, /* ifreq = 0.000000 MHz*/
+	18179755, /* timf*/
+	12000000, /* xtal_hz*/
+};
+
+static struct dib8000_config dib807x_dib8000_config[2] = {
+	{
+		.output_mpeg2_in_188_bytes = 1,
+
+		.agc_config_count = 2,
+		.agc = dib807x_agc_config,
+		.pll = &dib807x_bw_config_12_mhz,
+		.tuner_is_baseband = 1,
+
+		.gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
+		.gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
+		.gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
+
+		.hostbus_diversity = 1,
+		.div_cfg = 1,
+		.agc_control = &dib0070_ctrl_agc_filter,
+		.output_mode = OUTMODE_MPEG2_FIFO,
+		.drives = 0x2d98,
+	}, {
+		.output_mpeg2_in_188_bytes = 1,
+
+		.agc_config_count = 2,
+		.agc = dib807x_agc_config,
+		.pll = &dib807x_bw_config_12_mhz,
+		.tuner_is_baseband = 1,
+
+		.gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
+		.gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
+		.gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
+
+		.hostbus_diversity = 1,
+		.agc_control = &dib0070_ctrl_agc_filter,
+		.output_mode = OUTMODE_MPEG2_FIFO,
+		.drives = 0x2d98,
+	}
+};
+
+static int dib807x_tuner_reset(struct dvb_frontend *fe, int onoff)
+{
+	return dib8000_set_gpio(fe, 5, 0, !onoff);
+}
+
+static int dib807x_tuner_sleep(struct dvb_frontend *fe, int onoff)
+{
+	return dib8000_set_gpio(fe, 0, 0, onoff);
+}
+
+static const struct dib0070_wbd_gain_cfg dib8070_wbd_gain_cfg[] = {
+    { 240,      7},
+    { 0xffff,   6},
+};
+
+static struct dib0070_config dib807x_dib0070_config[2] = {
+	{
+		.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
+		.reset = dib807x_tuner_reset,
+		.sleep = dib807x_tuner_sleep,
+		.clock_khz = 12000,
+		.clock_pad_drive = 4,
+		.vga_filter = 1,
+		.force_crystal_mode = 1,
+		.enable_third_order_filter = 1,
+		.charge_pump = 0,
+		.wbd_gain = dib8070_wbd_gain_cfg,
+		.osc_buffer_state = 0,
+		.freq_offset_khz_uhf = -100,
+		.freq_offset_khz_vhf = -100,
+	}, {
+		.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
+		.reset = dib807x_tuner_reset,
+		.sleep = dib807x_tuner_sleep,
+		.clock_khz = 12000,
+		.clock_pad_drive = 2,
+		.vga_filter = 1,
+		.force_crystal_mode = 1,
+		.enable_third_order_filter = 1,
+		.charge_pump = 0,
+		.wbd_gain = dib8070_wbd_gain_cfg,
+		.osc_buffer_state = 0,
+		.freq_offset_khz_uhf = -25,
+		.freq_offset_khz_vhf = -25,
+	}
+};
+
+static int dib807x_set_param_override(struct dvb_frontend *fe,
+		struct dvb_frontend_parameters *fep)
+{
+	struct dvb_usb_adapter *adap = fe->dvb->priv;
+	struct dib0700_adapter_state *state = adap->priv;
+
+	u16 offset = dib0070_wbd_offset(fe);
+	u8 band = BAND_OF_FREQUENCY(fep->frequency/1000);
+	switch (band) {
+	case BAND_VHF:
+		offset += 750;
+		break;
+	case BAND_UHF:  /* fall-thru wanted */
+	default:
+		offset += 250; break;
+	}
+	deb_info("WBD for DiB8000: %d\n", offset);
+	dib8000_set_wbd_ref(fe, offset);
+
+	return state->set_param_save(fe, fep);
+}
+
+static int dib807x_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *st = adap->priv;
+	struct i2c_adapter *tun_i2c = dib8000_get_i2c_master(adap->fe,
+			DIBX000_I2C_INTERFACE_TUNER, 1);
+
+	if (adap->id == 0) {
+		if (dvb_attach(dib0070_attach, adap->fe, tun_i2c,
+				&dib807x_dib0070_config[0]) == NULL)
+			return -ENODEV;
+	} else {
+		if (dvb_attach(dib0070_attach, adap->fe, tun_i2c,
+				&dib807x_dib0070_config[1]) == NULL)
+			return -ENODEV;
+	}
+
+	st->set_param_save = adap->fe->ops.tuner_ops.set_params;
+	adap->fe->ops.tuner_ops.set_params = dib807x_set_param_override;
+	return 0;
+}
+
+
+/* STK807x */
+static int stk807x_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
+				0x80);
+
+	adap->fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80,
+			      &dib807x_dib8000_config[0]);
+
+	return adap->fe == NULL ?  -ENODEV : 0;
+}
+
+/* STK807xPVR */
+static int stk807xpvr_frontend_attach0(struct dvb_usb_adapter *adap)
+{
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
+	msleep(30);
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(500);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	/* initialize IC 0 */
+	dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x12, 0x80);
+
+	adap->fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80,
+			      &dib807x_dib8000_config[0]);
+
+	return adap->fe == NULL ? -ENODEV : 0;
+}
+
+static int stk807xpvr_frontend_attach1(struct dvb_usb_adapter *adap)
+{
+	/* initialize IC 1 */
+	dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x22, 0x82);
+
+	adap->fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x82,
+			      &dib807x_dib8000_config[1]);
+
+	return adap->fe == NULL ? -ENODEV : 0;
+}
+
+
 /* STK7070PD */
 static struct dib7000p_config stk7070pd_dib7000p_config[2] = {
 	{
@@ -1557,6 +1858,8 @@ struct usb_device_id dib0700_usb_id_table[] = {
 	{ USB_DEVICE(USB_VID_PINNACLE,	USB_PID_PINNACLE_PCTV282E) },
 	{ USB_DEVICE(USB_VID_DIBCOM,	USB_PID_DIBCOM_STK7770P) },
 /* 60 */{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_CINERGY_T_XXS_2) },
+	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_STK807XPVR) },
+	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_STK807XP) },
 	{ 0 }		/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
@@ -2044,6 +2347,68 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 				{ NULL },
 			},
 		},
+		.rc_interval      = DEFAULT_RC_INTERVAL,
+		.rc_key_map       = dib0700_rc_keys,
+		.rc_key_map_size  = ARRAY_SIZE(dib0700_rc_keys),
+		.rc_query         = dib0700_rc_query
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 1,
+		.adapter = {
+			{
+				.frontend_attach  = stk807x_frontend_attach,
+				.tuner_attach     = dib807x_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+
+				.size_of_priv =
+					sizeof(struct dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 1,
+		.devices = {
+			{   "DiBcom STK807xP reference design",
+				{ &dib0700_usb_id_table[62], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc_interval      = DEFAULT_RC_INTERVAL,
+		.rc_key_map       = dib0700_rc_keys,
+		.rc_key_map_size  = ARRAY_SIZE(dib0700_rc_keys),
+		.rc_query         = dib0700_rc_query
+
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 2,
+		.adapter = {
+			{
+				.frontend_attach  = stk807xpvr_frontend_attach0,
+				.tuner_attach     = dib807x_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+
+				.size_of_priv =
+					sizeof(struct dib0700_adapter_state),
+			},
+			{
+				.frontend_attach  = stk807xpvr_frontend_attach1,
+				.tuner_attach     = dib807x_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
+
+				.size_of_priv =
+					sizeof(struct dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 1,
+		.devices = {
+			{   "DiBcom STK807xPVR reference design",
+				{ &dib0700_usb_id_table[61], NULL },
+				{ NULL },
+			},
+		},
+
 		.rc_interval      = DEFAULT_RC_INTERVAL,
 		.rc_key_map       = dib0700_rc_keys,
 		.rc_key_map_size  = ARRAY_SIZE(dib0700_rc_keys),
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index a07959c1c06..7c0e3124a69 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -95,6 +95,8 @@
 #define USB_PID_DIBCOM_STK7700_U7000			0x7001
 #define USB_PID_DIBCOM_STK7070P				0x1ebc
 #define USB_PID_DIBCOM_STK7070PD			0x1ebe
+#define USB_PID_DIBCOM_STK807XP				0x1f90
+#define USB_PID_DIBCOM_STK807XPVR			0x1f98
 #define USB_PID_DIBCOM_ANCHOR_2135_COLD			0x2131
 #define USB_PID_DIBCOM_STK7770P				0x1e80
 #define USB_PID_DPOSH_M9206_COLD			0x9206
-- 
cgit v1.2.3


From 78f3bc631f39fbfa4eaf039f0664265e71f725fb Mon Sep 17 00:00:00 2001
From: Patrick Boettcher <pboettcher@dibcom.fr>
Date: Mon, 17 Aug 2009 12:53:51 -0300
Subject: V4L/DVB (12903): DiB8000: fix channel search parameter initialization

This patch is fixing the initialization of the channel search parameters.

Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/frontends/dib8000.c | 24 +++++++++++-------------
 1 file changed, 11 insertions(+), 13 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/frontends/dib8000.c b/drivers/media/dvb/frontends/dib8000.c
index 99ee6b09ce1..852c790d09d 100644
--- a/drivers/media/dvb/frontends/dib8000.c
+++ b/drivers/media/dvb/frontends/dib8000.c
@@ -22,7 +22,7 @@
 
 #define FE_CALLBACK_TIME_NEVER 0xffffffff
 
-static int debug = 0;
+static int debug;
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
 
@@ -1671,10 +1671,6 @@ static int dib8000_autosearch_start(struct dvb_frontend *fe)
 
 	int slist = 0;
 
-	state->fe.dtv_property_cache.transmission_mode = TRANSMISSION_MODE_8K;
-	state->fe.dtv_property_cache.guard_interval = GUARD_INTERVAL_1_8;
-	//state->fe.dtv_property_cache.isdbt_sb_mode                = 0;
-	//state->fe.dtv_property_cache.isdbt_partial_reception      = 0;
 	state->fe.dtv_property_cache.inversion = 0;
 	if (!state->fe.dtv_property_cache.isdbt_sb_mode)
 		state->fe.dtv_property_cache.layer[0].segment_count = 13;
@@ -1684,6 +1680,8 @@ static int dib8000_autosearch_start(struct dvb_frontend *fe)
 
 	//choose the right list, in sb, always do everything
 	if (state->fe.dtv_property_cache.isdbt_sb_mode) {
+		state->fe.dtv_property_cache.transmission_mode = TRANSMISSION_MODE_8K;
+		state->fe.dtv_property_cache.guard_interval = GUARD_INTERVAL_1_8;
 		slist = 7;
 		dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x9fff) | (1 << 13));
 	} else {
@@ -1691,22 +1689,21 @@ static int dib8000_autosearch_start(struct dvb_frontend *fe)
 			if (state->fe.dtv_property_cache.transmission_mode == TRANSMISSION_MODE_AUTO) {
 				slist = 7;
 				dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x9fff) | (1 << 13));	// P_mode = 1 to have autosearch start ok with mode2
-			} else {
+			} else
 				slist = 3;
-				state->fe.dtv_property_cache.transmission_mode = state->fe.dtv_property_cache.transmission_mode;
-			}
 		} else {
 			if (state->fe.dtv_property_cache.transmission_mode == TRANSMISSION_MODE_AUTO) {
 				slist = 2;
-				state->fe.dtv_property_cache.guard_interval = state->fe.dtv_property_cache.guard_interval;
 				dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x9fff) | (1 << 13));	// P_mode = 1
-			} else {
+			} else
 				slist = 0;
-				state->fe.dtv_property_cache.transmission_mode = state->fe.dtv_property_cache.transmission_mode;
-				state->fe.dtv_property_cache.guard_interval = state->fe.dtv_property_cache.guard_interval;
-			}
 		}
 
+		if (state->fe.dtv_property_cache.transmission_mode == TRANSMISSION_MODE_AUTO)
+			state->fe.dtv_property_cache.transmission_mode = TRANSMISSION_MODE_8K;
+		if (state->fe.dtv_property_cache.guard_interval == GUARD_INTERVAL_AUTO)
+			state->fe.dtv_property_cache.guard_interval = GUARD_INTERVAL_1_8;
+
 		dprintk("using list for autosearch : %d", slist);
 		dib8000_set_channel(state, (unsigned char)slist, 1);
 		//dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x9fff) | (1 << 13));  // P_mode = 1
@@ -1733,6 +1730,7 @@ static int dib8000_autosearch_start(struct dvb_frontend *fe)
 		dib8000_write_word(state, 0, (u16) ((1 << 15) | value));
 		dib8000_read_word(state, 1284);	// reset the INT. n_irq_pending
 		dib8000_write_word(state, 0, (u16) value);
+
 	}
 
 	return 0;
-- 
cgit v1.2.3


From aaeab30f753d9499e04979e2a5a7feadba18c39d Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Wed, 16 Sep 2009 09:18:26 -0300
Subject: V4L/DVB (12906): dib0700: Add support for Prolink SBTVD

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/dvb-usb/dib0700_devices.c | 7 ++++++-
 drivers/media/dvb/dvb-usb/dvb-usb-ids.h     | 2 ++
 2 files changed, 8 insertions(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index 442afbaabee..0b2812aa30a 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -1860,6 +1860,7 @@ struct usb_device_id dib0700_usb_id_table[] = {
 /* 60 */{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_CINERGY_T_XXS_2) },
 	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_STK807XPVR) },
 	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_STK807XP) },
+	{ USB_DEVICE(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD) },
 	{ 0 }		/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
@@ -2365,12 +2366,16 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			},
 		},
 
-		.num_device_descs = 1,
+		.num_device_descs = 2,
 		.devices = {
 			{   "DiBcom STK807xP reference design",
 				{ &dib0700_usb_id_table[62], NULL },
 				{ NULL },
 			},
+			{   "Prolink Pixelview SBTVD",
+				{ &dib0700_usb_id_table[63], NULL },
+				{ NULL },
+			},
 		},
 
 		.rc_interval      = DEFAULT_RC_INTERVAL,
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index 7c0e3124a69..2d51e3c2820 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -46,6 +46,7 @@
 #define USB_VID_MSI_2				0x1462
 #define USB_VID_OPERA1				0x695c
 #define USB_VID_PINNACLE			0x2304
+#define USB_VID_PIXELVIEW			0x1554
 #define USB_VID_TECHNOTREND			0x0b48
 #define USB_VID_TERRATEC			0x0ccd
 #define USB_VID_TELESTAR			0x10b9
@@ -202,6 +203,7 @@
 #define USB_PID_PINNACLE_PCTV73A			0x0243
 #define USB_PID_PINNACLE_PCTV73ESE			0x0245
 #define USB_PID_PINNACLE_PCTV282E			0x0248
+#define USB_PID_PIXELVIEW_SBTVD				0x5010
 #define USB_PID_PCTV_200E				0x020e
 #define USB_PID_PCTV_400E				0x020f
 #define USB_PID_PCTV_450E				0x0222
-- 
cgit v1.2.3


From 443c1228d50518f3c550e1fef490a2c9d9246ce7 Mon Sep 17 00:00:00 2001
From: Steven Toth <stoth@kernellabs.com>
Date: Sat, 9 May 2009 21:17:28 -0300
Subject: V4L/DVB (12923): SAA7164: Add support for the NXP SAA7164 silicon

This patch adds support for all of the known shipping Hauppauge HVR-2200
and HVR-2250 boards. Digital TV ATSC/QAM and DVB-T is enabled at this
time. Both tuners are supported.

Volatiles and typedefs need rework, the rest is coding style compliant.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/Kconfig                  |   2 +
 drivers/media/video/Makefile                 |   1 +
 drivers/media/video/saa7164/Kconfig          |  19 +
 drivers/media/video/saa7164/Makefile         |  12 +
 drivers/media/video/saa7164/saa7164-api.c    | 619 ++++++++++++++++++++++
 drivers/media/video/saa7164/saa7164-buffer.c | 158 ++++++
 drivers/media/video/saa7164/saa7164-bus.c    | 448 ++++++++++++++++
 drivers/media/video/saa7164/saa7164-cards.c  | 562 ++++++++++++++++++++
 drivers/media/video/saa7164/saa7164-cmd.c    | 529 +++++++++++++++++++
 drivers/media/video/saa7164/saa7164-core.c   | 746 +++++++++++++++++++++++++++
 drivers/media/video/saa7164/saa7164-dvb.c    | 578 +++++++++++++++++++++
 drivers/media/video/saa7164/saa7164-fw.c     | 615 ++++++++++++++++++++++
 drivers/media/video/saa7164/saa7164-i2c.c    | 170 ++++++
 drivers/media/video/saa7164/saa7164-reg.h    | 166 ++++++
 drivers/media/video/saa7164/saa7164-types.h  | 287 +++++++++++
 drivers/media/video/saa7164/saa7164.h        | 401 ++++++++++++++
 16 files changed, 5313 insertions(+)
 create mode 100644 drivers/media/video/saa7164/Kconfig
 create mode 100644 drivers/media/video/saa7164/Makefile
 create mode 100644 drivers/media/video/saa7164/saa7164-api.c
 create mode 100644 drivers/media/video/saa7164/saa7164-buffer.c
 create mode 100644 drivers/media/video/saa7164/saa7164-bus.c
 create mode 100644 drivers/media/video/saa7164/saa7164-cards.c
 create mode 100644 drivers/media/video/saa7164/saa7164-cmd.c
 create mode 100644 drivers/media/video/saa7164/saa7164-core.c
 create mode 100644 drivers/media/video/saa7164/saa7164-dvb.c
 create mode 100644 drivers/media/video/saa7164/saa7164-fw.c
 create mode 100644 drivers/media/video/saa7164/saa7164-i2c.c
 create mode 100644 drivers/media/video/saa7164/saa7164-reg.h
 create mode 100644 drivers/media/video/saa7164/saa7164-types.h
 create mode 100644 drivers/media/video/saa7164/saa7164.h

(limited to 'drivers/media')

diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 1d758525d23..e01b759faf5 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -690,6 +690,8 @@ source "drivers/media/video/ivtv/Kconfig"
 
 source "drivers/media/video/cx18/Kconfig"
 
+source "drivers/media/video/saa7164/Kconfig"
+
 config VIDEO_M32R_AR
 	tristate "AR devices"
 	depends on M32R && VIDEO_V4L1
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 9f2e3214a48..1dddea1ada5 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -157,6 +157,7 @@ obj-$(CONFIG_VIDEO_SH_MOBILE_CEU)	+= sh_mobile_ceu_camera.o
 obj-$(CONFIG_VIDEO_AU0828) += au0828/
 
 obj-$(CONFIG_USB_VIDEO_CLASS)	+= uvc/
+obj-$(CONFIG_VIDEO_SAA7164)     += saa7164/
 
 obj-$(CONFIG_VIDEO_IR_I2C)  += ir-kbd-i2c.o
 
diff --git a/drivers/media/video/saa7164/Kconfig b/drivers/media/video/saa7164/Kconfig
new file mode 100644
index 00000000000..582556792bd
--- /dev/null
+++ b/drivers/media/video/saa7164/Kconfig
@@ -0,0 +1,19 @@
+config VIDEO_SAA7164
+	tristate "NXP SAA7164 support"
+	depends on DVB_CORE && PCI && I2C
+	depends on HOTPLUG	# due to FW_LOADER
+	select I2C_ALGOBIT
+	select FW_LOADER
+	select VIDEO_TUNER
+	select VIDEO_TVEEPROM
+	select VIDEOBUF_DVB
+	select DVB_TDA10048 if !DVB_FE_CUSTOMISE
+	select DVB_S5H1411 if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE
+	---help---
+	  This is a video4linux driver for NXP SAA7164 based
+	  TV cards.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called saa7164
+
diff --git a/drivers/media/video/saa7164/Makefile b/drivers/media/video/saa7164/Makefile
new file mode 100644
index 00000000000..4b329fd42ad
--- /dev/null
+++ b/drivers/media/video/saa7164/Makefile
@@ -0,0 +1,12 @@
+saa7164-objs	:= saa7164-cards.o saa7164-core.o saa7164-i2c.o saa7164-dvb.o \
+			saa7164-fw.o saa7164-bus.o saa7164-cmd.o saa7164-api.o \
+			saa7164-buffer.o
+
+obj-$(CONFIG_VIDEO_SAA7164) += saa7164.o
+
+EXTRA_CFLAGS += -Idrivers/media/video
+EXTRA_CFLAGS += -Idrivers/media/common/tuners
+EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
+EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
+
+EXTRA_CFLAGS += $(extra-cflags-y) $(extra-cflags-m)
diff --git a/drivers/media/video/saa7164/saa7164-api.c b/drivers/media/video/saa7164/saa7164-api.c
new file mode 100644
index 00000000000..8cef1df9b54
--- /dev/null
+++ b/drivers/media/video/saa7164/saa7164-api.c
@@ -0,0 +1,619 @@
+/*
+ *  Driver for the NXP SAA7164 PCIe bridge
+ *
+ *  Copyright (c) 2009 Steven Toth <stoth@kernellabs.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/wait.h>
+
+#include "saa7164.h"
+
+int saa7164_api_transition_port(struct saa7164_tsport *port, u8 mode)
+{
+	int ret;
+
+	ret = saa7164_cmd_send(port->dev, port->hwcfg.unitid, SET_CUR,
+		SAA_STATE_CONTROL, sizeof(mode), &mode);
+	if (ret != SAA_OK)
+		printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
+
+	return ret;
+}
+
+int saa7164_api_get_fw_version(struct saa7164_dev *dev, u32 *version)
+{
+	int ret;
+
+	ret = saa7164_cmd_send(dev, 0, GET_CUR,
+		GET_FW_VERSION_CONTROL, sizeof(u32), version);
+	if (ret != SAA_OK)
+		printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
+
+	return ret;
+}
+
+int saa7164_api_read_eeprom(struct saa7164_dev *dev, u8 *buf, int buflen)
+{
+	u8 reg[] = { 0x0f, 0x00 };
+
+	if (buflen < 128)
+		return -ENOMEM;
+
+	/* Assumption: Hauppauge eeprom is at 0xa0 on on bus 0 */
+	/* TODO: Pull the details from the boards struct */
+	return saa7164_api_i2c_read(&dev->i2c_bus[0], 0xa0 >> 1, sizeof(reg),
+		&reg[0], 128, buf);
+}
+
+/*  Exercise the i2c interface, saa7164_cmd()/bus() layers:
+ *  1. Read the identity byte from each of the demodulators.
+ *  2. Read the entire register set from the TDA18271.
+ *  TODO: This function has no purpose other than to exercise i2c.
+ */
+int saa7164_api_test(struct saa7164_dev *dev)
+{
+	/* TDA10048 identities */
+	u8 reg[] = { 0x00 };
+	u8 data[256];
+	dprintk(DBGLVL_API, "%s()\n", __func__);
+	/* Read all 39 bytes from the TDA18271 tuners */
+	saa7164_api_i2c_read(&dev->i2c_bus[1], 0xc0 >> 1, 0,
+		&reg[0], 39, &data[0]);
+	saa7164_api_i2c_read(&dev->i2c_bus[2], 0xc0 >> 1, 0,
+		&reg[0], 39, &data[0]);
+
+	return 0;
+}
+
+int saa7164_api_configure_port_mpeg2ts(struct saa7164_dev *dev,
+	struct saa7164_tsport *port,
+	tmComResTSFormatDescrHeader_t *tsfmt)
+{
+	dprintk(DBGLVL_API, "    bFormatIndex = 0x%x\n", tsfmt->bFormatIndex);
+	dprintk(DBGLVL_API, "    bDataOffset  = 0x%x\n", tsfmt->bDataOffset);
+	dprintk(DBGLVL_API, "    bPacketLength= 0x%x\n", tsfmt->bPacketLength);
+	dprintk(DBGLVL_API, "    bStrideLength= 0x%x\n", tsfmt->bStrideLength);
+	dprintk(DBGLVL_API, "    bguid        = (....)\n");
+
+	/* Cache the hardware configuration in the port */
+
+	port->bufcounter = port->hwcfg.BARLocation;
+	port->pitch = port->hwcfg.BARLocation + (2 * sizeof(u32));
+	port->bufsize = port->hwcfg.BARLocation + (3 * sizeof(u32));
+	port->bufoffset = port->hwcfg.BARLocation + (4 * sizeof(u32));
+	port->bufptr32l = port->hwcfg.BARLocation +
+		(4 * sizeof(u32)) +
+		(sizeof(u32) * port->hwcfg.buffercount) + sizeof(u32);
+	port->bufptr32h = port->hwcfg.BARLocation +
+		(4 * sizeof(u32)) +
+		(sizeof(u32) * port->hwcfg.buffercount);
+	port->bufptr64 = port->hwcfg.BARLocation +
+		(4 * sizeof(u32)) +
+		(sizeof(u32) * port->hwcfg.buffercount);
+	dprintk(DBGLVL_API, "   = port->hwcfg.BARLocation = 0x%x\n",
+		port->hwcfg.BARLocation);
+
+	dprintk(DBGLVL_API, "   = VS_FORMAT_MPEGTS (becomes dev->ts[%d])\n",
+		port->nr);
+
+	return 0;
+}
+
+int saa7164_api_dump_subdevs(struct saa7164_dev *dev, u8 *buf, int len)
+{
+	struct saa7164_tsport *port = 0;
+	u32 idx, next_offset;
+	int i;
+	tmComResDescrHeader_t *hdr, *t;
+	tmComResExtDevDescrHeader_t *exthdr;
+	tmComResPathDescrHeader_t *pathhdr;
+	tmComResAntTermDescrHeader_t *anttermhdr;
+	tmComResTunerDescrHeader_t *tunerunithdr;
+	tmComResDMATermDescrHeader_t *vcoutputtermhdr;
+	tmComResTSFormatDescrHeader_t *tsfmt;
+	u32 currpath = 0;
+
+	dprintk(DBGLVL_API,
+		"%s(?,?,%d) sizeof(tmComResDescrHeader_t) = %lu bytes\n",
+		__func__, len, sizeof(tmComResDescrHeader_t));
+
+	for (idx = 0; idx < (len - sizeof(tmComResDescrHeader_t)); ) {
+
+		hdr = (tmComResDescrHeader_t *)(buf + idx);
+
+		if (hdr->type != CS_INTERFACE)
+			return SAA_ERR_NOT_SUPPORTED;
+
+		dprintk(DBGLVL_API, "@ 0x%x = \n", idx);
+		switch (hdr->subtype) {
+		case GENERAL_REQUEST:
+			dprintk(DBGLVL_API, " GENERAL_REQUEST\n");
+			break;
+		case VC_TUNER_PATH:
+			dprintk(DBGLVL_API, " VC_TUNER_PATH\n");
+			pathhdr = (tmComResPathDescrHeader_t *)(buf + idx);
+			dprintk(DBGLVL_API, "  pathid = 0x%x\n",
+				pathhdr->pathid);
+			currpath = pathhdr->pathid;
+			break;
+		case VC_INPUT_TERMINAL:
+			dprintk(DBGLVL_API, " VC_INPUT_TERMINAL\n");
+			anttermhdr =
+				(tmComResAntTermDescrHeader_t *)(buf + idx);
+			dprintk(DBGLVL_API, "  terminalid   = 0x%x\n",
+				anttermhdr->terminalid);
+			dprintk(DBGLVL_API, "  terminaltype = 0x%x\n",
+				anttermhdr->terminaltype);
+			switch (anttermhdr->terminaltype) {
+			case ITT_ANTENNA:
+				dprintk(DBGLVL_API, "   = ITT_ANTENNA\n");
+				break;
+			case LINE_CONNECTOR:
+				dprintk(DBGLVL_API, "   = LINE_CONNECTOR\n");
+				break;
+			case SPDIF_CONNECTOR:
+				dprintk(DBGLVL_API, "   = SPDIF_CONNECTOR\n");
+				break;
+			case COMPOSITE_CONNECTOR:
+				dprintk(DBGLVL_API,
+					"   = COMPOSITE_CONNECTOR\n");
+				break;
+			case SVIDEO_CONNECTOR:
+				dprintk(DBGLVL_API, "   = SVIDEO_CONNECTOR\n");
+				break;
+			case COMPONENT_CONNECTOR:
+				dprintk(DBGLVL_API,
+					"   = COMPONENT_CONNECTOR\n");
+				break;
+			case STANDARD_DMA:
+				dprintk(DBGLVL_API, "   = STANDARD_DMA\n");
+				break;
+			default:
+				dprintk(DBGLVL_API, "   = undefined (0x%x)\n",
+					anttermhdr->terminaltype);
+			}
+			dprintk(DBGLVL_API, "  assocterminal= 0x%x\n",
+				anttermhdr->assocterminal);
+			dprintk(DBGLVL_API, "  iterminal    = 0x%x\n",
+				anttermhdr->iterminal);
+			dprintk(DBGLVL_API, "  controlsize  = 0x%x\n",
+				anttermhdr->controlsize);
+			break;
+		case VC_OUTPUT_TERMINAL:
+			dprintk(DBGLVL_API, " VC_OUTPUT_TERMINAL\n");
+			vcoutputtermhdr =
+				(tmComResDMATermDescrHeader_t *)(buf + idx);
+			dprintk(DBGLVL_API, "  unitid = 0x%x\n",
+				vcoutputtermhdr->unitid);
+			dprintk(DBGLVL_API, "  terminaltype = 0x%x\n",
+				vcoutputtermhdr->terminaltype);
+			switch (vcoutputtermhdr->terminaltype) {
+			case ITT_ANTENNA:
+				dprintk(DBGLVL_API, "   = ITT_ANTENNA\n");
+				break;
+			case LINE_CONNECTOR:
+				dprintk(DBGLVL_API, "   = LINE_CONNECTOR\n");
+				break;
+			case SPDIF_CONNECTOR:
+				dprintk(DBGLVL_API, "   = SPDIF_CONNECTOR\n");
+				break;
+			case COMPOSITE_CONNECTOR:
+				dprintk(DBGLVL_API,
+					"   = COMPOSITE_CONNECTOR\n");
+				break;
+			case SVIDEO_CONNECTOR:
+				dprintk(DBGLVL_API, "   = SVIDEO_CONNECTOR\n");
+				break;
+			case COMPONENT_CONNECTOR:
+				dprintk(DBGLVL_API,
+					"   = COMPONENT_CONNECTOR\n");
+				break;
+			case STANDARD_DMA:
+				dprintk(DBGLVL_API, "   = STANDARD_DMA\n");
+				break;
+			default:
+				dprintk(DBGLVL_API, "   = undefined (0x%x)\n",
+					vcoutputtermhdr->terminaltype);
+			}
+			dprintk(DBGLVL_API, "  assocterminal= 0x%x\n",
+				vcoutputtermhdr->assocterminal);
+			dprintk(DBGLVL_API, "  sourceid     = 0x%x\n",
+				vcoutputtermhdr->sourceid);
+			dprintk(DBGLVL_API, "  iterminal    = 0x%x\n",
+				vcoutputtermhdr->iterminal);
+			dprintk(DBGLVL_API, "  BARLocation  = 0x%x\n",
+				vcoutputtermhdr->BARLocation);
+			dprintk(DBGLVL_API, "  flags        = 0x%x\n",
+				vcoutputtermhdr->flags);
+			dprintk(DBGLVL_API, "  interruptid  = 0x%x\n",
+				vcoutputtermhdr->interruptid);
+			dprintk(DBGLVL_API, "  buffercount  = 0x%x\n",
+				vcoutputtermhdr->buffercount);
+			dprintk(DBGLVL_API, "  metadatasize = 0x%x\n",
+				vcoutputtermhdr->metadatasize);
+			dprintk(DBGLVL_API, "  controlsize  = 0x%x\n",
+				vcoutputtermhdr->controlsize);
+			dprintk(DBGLVL_API, "  numformats   = 0x%x\n",
+				vcoutputtermhdr->numformats);
+
+			t = (tmComResDescrHeader_t *)
+				((tmComResDMATermDescrHeader_t *)(buf + idx));
+			next_offset = idx + (vcoutputtermhdr->len);
+			for (i = 0; i < vcoutputtermhdr->numformats; i++) {
+				t = (tmComResDescrHeader_t *)
+					(buf + next_offset);
+				switch (t->subtype) {
+				case VS_FORMAT_MPEG2TS:
+					tsfmt =
+					(tmComResTSFormatDescrHeader_t *)t;
+					if (currpath == 1)
+						port = &dev->ts1;
+					else
+						port = &dev->ts2;
+					memcpy(&port->hwcfg, vcoutputtermhdr,
+						sizeof(*vcoutputtermhdr));
+					saa7164_api_configure_port_mpeg2ts(dev,
+						port, tsfmt);
+					break;
+				case VS_FORMAT_MPEG2PS:
+					dprintk(DBGLVL_API,
+						"   = VS_FORMAT_MPEG2PS\n");
+					break;
+				case VS_FORMAT_VBI:
+					dprintk(DBGLVL_API,
+						"   = VS_FORMAT_VBI\n");
+					break;
+				case VS_FORMAT_RDS:
+					dprintk(DBGLVL_API,
+						"   = VS_FORMAT_RDS\n");
+					break;
+				case VS_FORMAT_UNCOMPRESSED:
+					dprintk(DBGLVL_API,
+					"   = VS_FORMAT_UNCOMPRESSED\n");
+					break;
+				case VS_FORMAT_TYPE:
+					dprintk(DBGLVL_API,
+						"   = VS_FORMAT_TYPE\n");
+					break;
+				default:
+					dprintk(DBGLVL_API,
+						"   = undefined (0x%x)\n",
+						t->subtype);
+				}
+				next_offset += t->len;
+			}
+
+			break;
+		case TUNER_UNIT:
+			dprintk(DBGLVL_API, " TUNER_UNIT\n");
+			tunerunithdr =
+				(tmComResTunerDescrHeader_t *)(buf + idx);
+			dprintk(DBGLVL_API, "  unitid = 0x%x\n",
+				tunerunithdr->unitid);
+			dprintk(DBGLVL_API, "  sourceid = 0x%x\n",
+				tunerunithdr->sourceid);
+			dprintk(DBGLVL_API, "  iunit = 0x%x\n",
+				tunerunithdr->iunit);
+			dprintk(DBGLVL_API, "  tuningstandards = 0x%x\n",
+				tunerunithdr->tuningstandards);
+			dprintk(DBGLVL_API, "  controlsize = 0x%x\n",
+				tunerunithdr->controlsize);
+			dprintk(DBGLVL_API, "  controls = 0x%x\n",
+				tunerunithdr->controls);
+			break;
+		case VC_SELECTOR_UNIT:
+			dprintk(DBGLVL_API, " VC_SELECTOR_UNIT\n");
+			break;
+		case VC_PROCESSING_UNIT:
+			dprintk(DBGLVL_API, " VC_PROCESSING_UNIT\n");
+			break;
+		case FEATURE_UNIT:
+			dprintk(DBGLVL_API, " FEATURE_UNIT\n");
+			break;
+		case ENCODER_UNIT:
+			dprintk(DBGLVL_API, " ENCODER_UNIT\n");
+			break;
+		case EXTENSION_UNIT:
+			dprintk(DBGLVL_API, " EXTENSION_UNIT\n");
+			exthdr = (tmComResExtDevDescrHeader_t *)(buf + idx);
+			dprintk(DBGLVL_API, "  unitid = 0x%x\n",
+				exthdr->unitid);
+			dprintk(DBGLVL_API, "  deviceid = 0x%x\n",
+				exthdr->deviceid);
+			dprintk(DBGLVL_API, "  devicetype = 0x%x\n",
+				exthdr->devicetype);
+			if (exthdr->devicetype & 0x1)
+				dprintk(DBGLVL_API, "   = Decoder Device\n");
+			if (exthdr->devicetype & 0x2)
+				dprintk(DBGLVL_API, "   = GPIO Source\n");
+			if (exthdr->devicetype & 0x4)
+				dprintk(DBGLVL_API, "   = Video Decoder\n");
+			if (exthdr->devicetype & 0x8)
+				dprintk(DBGLVL_API, "   = Audio Decoder\n");
+			if (exthdr->devicetype & 0x20)
+				dprintk(DBGLVL_API, "   = Crossbar\n");
+			if (exthdr->devicetype & 0x40)
+				dprintk(DBGLVL_API, "   = Tuner\n");
+			if (exthdr->devicetype & 0x80)
+				dprintk(DBGLVL_API, "   = IF PLL\n");
+			if (exthdr->devicetype & 0x100)
+				dprintk(DBGLVL_API, "   = Demodulator\n");
+			if (exthdr->devicetype & 0x200)
+				dprintk(DBGLVL_API, "   = RDS Decoder\n");
+			if (exthdr->devicetype & 0x400)
+				dprintk(DBGLVL_API, "   = Encoder\n");
+			if (exthdr->devicetype & 0x800)
+				dprintk(DBGLVL_API, "   = IR Decoder\n");
+			if (exthdr->devicetype & 0x1000)
+				dprintk(DBGLVL_API, "   = EEPROM\n");
+			if (exthdr->devicetype & 0x2000)
+				dprintk(DBGLVL_API,
+					"   = VBI Decoder\n");
+			if (exthdr->devicetype & 0x10000)
+				dprintk(DBGLVL_API,
+					"   = Streaming Device\n");
+			if (exthdr->devicetype & 0x20000)
+				dprintk(DBGLVL_API,
+					"   = DRM Device\n");
+			if (exthdr->devicetype & 0x40000000)
+				dprintk(DBGLVL_API,
+					"   = Generic Device\n");
+			if (exthdr->devicetype & 0x80000000)
+				dprintk(DBGLVL_API,
+					"   = Config Space Device\n");
+			dprintk(DBGLVL_API, "  numgpiopins = 0x%x\n",
+				exthdr->numgpiopins);
+			dprintk(DBGLVL_API, "  numgpiogroups = 0x%x\n",
+				exthdr->numgpiogroups);
+			dprintk(DBGLVL_API, "  controlsize = 0x%x\n",
+				exthdr->controlsize);
+			break;
+		case PVC_INFRARED_UNIT:
+			dprintk(DBGLVL_API, " PVC_INFRARED_UNIT\n");
+			break;
+		case DRM_UNIT:
+			dprintk(DBGLVL_API, " DRM_UNIT\n");
+			break;
+		default:
+			dprintk(DBGLVL_API, "default %d\n", hdr->subtype);
+		}
+
+		dprintk(DBGLVL_API, " 1.%x\n", hdr->len);
+		dprintk(DBGLVL_API, " 2.%x\n", hdr->type);
+		dprintk(DBGLVL_API, " 3.%x\n", hdr->subtype);
+		dprintk(DBGLVL_API, " 4.%x\n", hdr->unitid);
+
+		idx += hdr->len;
+	}
+
+	return 0;
+}
+
+int saa7164_api_enum_subdevs(struct saa7164_dev *dev)
+{
+	int ret;
+	u32 buflen = 0;
+	u8 *buf;
+
+	dprintk(DBGLVL_API, "%s()\n", __func__);
+
+	/* Get the total descriptor length */
+	ret = saa7164_cmd_send(dev, 0, GET_LEN,
+		GET_DESCRIPTORS_CONTROL, sizeof(buflen), &buflen);
+	if (ret != SAA_OK)
+		printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
+
+	dprintk(DBGLVL_API, "%s() total descriptor size = %d bytes.\n",
+		__func__, buflen);
+
+	/* Allocate enough storage for all of the descs */
+	buf = kzalloc(buflen, GFP_KERNEL);
+	if (buf == NULL)
+		return SAA_ERR_NO_RESOURCES;
+
+	/* Retrieve them */
+	ret = saa7164_cmd_send(dev, 0, GET_CUR,
+		GET_DESCRIPTORS_CONTROL, buflen, buf);
+	if (ret != SAA_OK) {
+		printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
+		goto out;
+	}
+
+	if (debug & DBGLVL_API)
+		saa7164_dumphex16(dev, buf, (buflen/16)*16);
+
+	saa7164_api_dump_subdevs(dev, buf, buflen);
+
+out:
+	kfree(buf);
+	return ret;
+}
+
+int saa7164_api_i2c_read(struct saa7164_i2c *bus, u8 addr, u32 reglen, u8 *reg,
+	u32 datalen, u8 *data)
+{
+	struct saa7164_dev *dev = bus->dev;
+	u16 len = 0;
+	int unitid;
+	u32 regval;
+	u8 buf[256];
+	int ret;
+
+	dprintk(DBGLVL_API, "%s()\n", __func__);
+
+	if (reglen > 4)
+		return -EIO;
+
+	if (reglen == 1)
+		regval = *(reg);
+	else
+	if (reglen == 2)
+		regval = ((*(reg) << 8) || *(reg+1));
+	else
+	if (reglen == 3)
+		regval = ((*(reg) << 16) | (*(reg+1) << 8) | *(reg+2));
+	else
+	if (reglen == 4)
+		regval = ((*(reg) << 24) | (*(reg+1) << 16) |
+			(*(reg+2) << 8) | *(reg+3));
+
+	/* Prepare the send buffer */
+	/* Bytes 00-03 source register length
+	 *       04-07 source bytes to read
+	 *       08... register address
+	 */
+	memset(buf, 0, sizeof(buf));
+	memcpy((buf + 2 * sizeof(u32) + 0), reg, reglen);
+	*((u32 *)(buf + 0 * sizeof(u32))) = reglen;
+	*((u32 *)(buf + 1 * sizeof(u32))) = datalen;
+
+	unitid = saa7164_i2caddr_to_unitid(bus, addr);
+	if (unitid < 0) {
+		printk(KERN_ERR
+			"%s() error, cannot translate regaddr 0x%x to unitid\n",
+			__func__, addr);
+		return -EIO;
+	}
+
+	ret = saa7164_cmd_send(bus->dev, unitid, GET_LEN,
+		EXU_REGISTER_ACCESS_CONTROL, sizeof(len), &len);
+	if (ret != SAA_OK) {
+		printk(KERN_ERR "%s() error, ret(1) = 0x%x\n", __func__, ret);
+		return -EIO;
+	}
+
+	dprintk(DBGLVL_API, "%s() len = %d bytes\n", __func__, len);
+
+	if (debug & DBGLVL_I2C)
+		saa7164_dumphex16(dev, buf, 2 * 16);
+
+	ret = saa7164_cmd_send(bus->dev, unitid, GET_CUR,
+		EXU_REGISTER_ACCESS_CONTROL, len, &buf);
+	if (ret != SAA_OK)
+		printk(KERN_ERR "%s() error, ret(2) = 0x%x\n", __func__, ret);
+	else {
+		if (debug & DBGLVL_I2C)
+			saa7164_dumphex16(dev, buf, sizeof(buf));
+		memcpy(data, (buf + 2 * sizeof(u32) + reglen), datalen);
+	}
+
+	return ret == SAA_OK ? 0 : -EIO;
+}
+
+/* For a given 8 bit i2c address device, write the buffer */
+int saa7164_api_i2c_write(struct saa7164_i2c *bus, u8 addr, u32 datalen,
+	u8 *data)
+{
+	struct saa7164_dev *dev = bus->dev;
+	u16 len = 0;
+	int unitid;
+	int reglen;
+	u8 buf[256];
+	int ret;
+
+	dprintk(DBGLVL_API, "%s()\n", __func__);
+
+	if ((datalen == 0) || (datalen > 232))
+		return -EIO;
+
+	memset(buf, 0, sizeof(buf));
+
+	unitid = saa7164_i2caddr_to_unitid(bus, addr);
+	if (unitid < 0) {
+		printk(KERN_ERR
+			"%s() error, cannot translate regaddr 0x%x to unitid\n",
+			__func__, addr);
+		return -EIO;
+	}
+
+	reglen = saa7164_i2caddr_to_reglen(bus, addr);
+	if (unitid < 0) {
+		printk(KERN_ERR
+			"%s() error, cannot translate regaddr to reglen\n",
+			__func__);
+		return -EIO;
+	}
+
+	ret = saa7164_cmd_send(bus->dev, unitid, GET_LEN,
+		EXU_REGISTER_ACCESS_CONTROL, sizeof(len), &len);
+	if (ret != SAA_OK) {
+		printk(KERN_ERR "%s() error, ret(1) = 0x%x\n", __func__, ret);
+		return -EIO;
+	}
+
+	dprintk(DBGLVL_API, "%s() len = %d bytes\n", __func__, len);
+
+	/* Prepare the send buffer */
+	/* Bytes 00-03 dest register length
+	 *       04-07 dest bytes to write
+	 *       08... register address
+	 */
+	*((u32 *)(buf + 0 * sizeof(u32))) = reglen;
+	*((u32 *)(buf + 1 * sizeof(u32))) = datalen - reglen;
+	memcpy((buf + 2 * sizeof(u32)), data, datalen);
+
+	if (debug & DBGLVL_I2C)
+		saa7164_dumphex16(dev, buf, sizeof(buf));
+
+	ret = saa7164_cmd_send(bus->dev, unitid, SET_CUR,
+		EXU_REGISTER_ACCESS_CONTROL, len, &buf);
+	if (ret != SAA_OK)
+		printk(KERN_ERR "%s() error, ret(2) = 0x%x\n", __func__, ret);
+
+	return ret == SAA_OK ? 0 : -EIO;
+}
+
+
+int saa7164_api_modify_gpio(struct saa7164_dev *dev, u8 unitid,
+	u8 pin, u8 state)
+{
+	int ret;
+	tmComResGPIO_t t;
+
+	dprintk(DBGLVL_API, "%s(0x%x, %d, %d)\n",
+		__func__, unitid, pin, state);
+
+	if ((pin > 7) || (state > 2))
+		return SAA_ERR_BAD_PARAMETER;
+
+	t.pin = pin;
+	t.state = state;
+
+	ret = saa7164_cmd_send(dev, unitid, SET_CUR,
+		EXU_GPIO_CONTROL, sizeof(t), &t);
+	if (ret != SAA_OK)
+		printk(KERN_ERR "%s() error, ret = 0x%x\n",
+			__func__, ret);
+
+	return ret;
+}
+
+int saa7164_api_set_gpiobit(struct saa7164_dev *dev, u8 unitid,
+	u8 pin)
+{
+	return saa7164_api_modify_gpio(dev, unitid, pin, 1);
+}
+
+int saa7164_api_clear_gpiobit(struct saa7164_dev *dev, u8 unitid,
+	u8 pin)
+{
+	return saa7164_api_modify_gpio(dev, unitid, pin, 0);
+}
+
+
+
diff --git a/drivers/media/video/saa7164/saa7164-buffer.c b/drivers/media/video/saa7164/saa7164-buffer.c
new file mode 100644
index 00000000000..4176544ee01
--- /dev/null
+++ b/drivers/media/video/saa7164/saa7164-buffer.c
@@ -0,0 +1,158 @@
+/*
+ *  Driver for the NXP SAA7164 PCIe bridge
+ *
+ *  Copyright (c) 2009 Steven Toth <stoth@kernellabs.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "saa7164.h"
+
+/* The PCI address space for buffer handling looks like this:
+
+ +-u32 wide-------------+
+ |                      +
+ +-u64 wide------------------------------------+
+ +                                             +
+ +----------------------+
+ | CurrentBufferPtr     + Pointer to current PCI buffer >-+
+ +----------------------+                                 |
+ | Unused               +                                 |
+ +----------------------+                                 |
+ | Pitch                + = 188 (bytes)                   |
+ +----------------------+                                 |
+ | PCI buffer size      + = pitch * number of lines (312) |
+ +----------------------+                                 |
+ |0| Buf0 Write Offset  +                                 |
+ +----------------------+                                 v
+ |1| Buf1 Write Offset  +                                 |
+ +----------------------+                                 |
+ |2| Buf2 Write Offset  +                                 |
+ +----------------------+                                 |
+ |3| Buf3 Write Offset  +                                 |
+ +----------------------+                                 |
+ ... More write offsets                                   |
+ +---------------------------------------------+          |
+ +0| set of ptrs to PCI pagetables             +          |
+ +---------------------------------------------+          |
+ +1| set of ptrs to PCI pagetables             + <--------+
+ +---------------------------------------------+
+ +2| set of ptrs to PCI pagetables             +
+ +---------------------------------------------+
+ +3| set of ptrs to PCI pagetables             + >--+
+ +---------------------------------------------+    |
+ ... More buffer pointers                           |  +----------------+
+						    +->| pt[0] TS data  |
+						    |  +----------------+
+						    |
+						    |  +----------------+
+						    +->| pt[1] TS data  |
+						    |  +----------------+
+						    | etc
+ */
+
+/* Allocate a new buffer structure and associated PCI space in bytes.
+ * len must be a multiple of sizeof(u64)
+ */
+struct saa7164_buffer *saa7164_buffer_alloc(struct saa7164_tsport *port,
+	u32 len)
+{
+	struct saa7164_buffer *buf = 0;
+	struct saa7164_dev *dev = port->dev;
+	int i;
+
+	if ((len == 0) || (len >= 65536) || (len % sizeof(u64))) {
+		log_warn("%s() SAA_ERR_BAD_PARAMETER\n", __func__);
+		goto ret;
+	}
+
+	buf = kzalloc(sizeof(struct saa7164_buffer), GFP_KERNEL);
+	if (buf == NULL) {
+		log_warn("%s() SAA_ERR_NO_RESOURCES\n", __func__);
+		goto ret;
+	}
+
+	buf->port = port;
+	buf->flags = SAA7164_BUFFER_FREE;
+	/* TODO: arg len is being ignored */
+	buf->pci_size = SAA7164_PT_ENTRIES * 0x1000;
+	buf->pt_size = (SAA7164_PT_ENTRIES * sizeof(u64)) + 0x1000;
+
+	/* Allocate contiguous memory */
+	buf->cpu = pci_alloc_consistent(port->dev->pci, buf->pci_size,
+		&buf->dma);
+	if (!buf->cpu)
+		goto fail1;
+
+	buf->pt_cpu = pci_alloc_consistent(port->dev->pci, buf->pt_size,
+		&buf->pt_dma);
+	if (!buf->pt_cpu)
+		goto fail2;
+
+	/* init the buffers to a known pattern, easier during debugging */
+	memset(buf->cpu, 0xff, buf->pci_size);
+	memset(buf->pt_cpu, 0xff, buf->pt_size);
+
+	dprintk(DBGLVL_BUF, "%s()   allocated buffer @ 0x%p\n", __func__, buf);
+	dprintk(DBGLVL_BUF, "  pci_cpu @ 0x%llx    dma @ 0x%llx len = 0x%x\n",
+		(u64)buf->cpu, (u64)buf->dma, buf->pci_size);
+	dprintk(DBGLVL_BUF, "   pt_cpu @ 0x%llx pt_dma @ 0x%llx len = 0x%x\n",
+		(u64)buf->pt_cpu, (u64)buf->pt_dma, buf->pt_size);
+
+	/* Format the Page Table Entries to point into the data buffer */
+	for (i = 0 ; i < SAA7164_PT_ENTRIES; i++) {
+
+		*(buf->pt_cpu + i) = buf->dma + (i * 0x1000); /* TODO */
+
+		dprintk(DBGLVL_BUF, "    pt[%02d] = 0x%llx -> 0x%llx\n",
+			i, (u64)buf->pt_cpu, (u64)*(buf->pt_cpu));
+
+	}
+
+	goto ret;
+
+fail2:
+	pci_free_consistent(port->dev->pci, buf->pci_size, buf->cpu, buf->dma);
+fail1:
+	kfree(buf);
+
+	buf = 0;
+ret:
+	return buf;
+}
+
+int saa7164_buffer_dealloc(struct saa7164_tsport *port,
+	struct saa7164_buffer *buf)
+{
+	struct saa7164_dev *dev = port->dev;
+
+	if ((buf == 0) || (port == 0))
+		return SAA_ERR_BAD_PARAMETER;
+
+	dprintk(DBGLVL_BUF, "%s() deallocating buffer @ 0x%p\n", __func__, buf);
+
+	if (buf->flags != SAA7164_BUFFER_FREE)
+		log_warn(" freeing a non-free buffer\n");
+
+	pci_free_consistent(port->dev->pci, buf->pci_size, buf->cpu, buf->dma);
+	pci_free_consistent(port->dev->pci, buf->pt_size, buf->pt_cpu,
+		buf->pt_dma);
+
+	kfree(buf);
+
+	return SAA_OK;
+}
+
diff --git a/drivers/media/video/saa7164/saa7164-bus.c b/drivers/media/video/saa7164/saa7164-bus.c
new file mode 100644
index 00000000000..28f630dc49c
--- /dev/null
+++ b/drivers/media/video/saa7164/saa7164-bus.c
@@ -0,0 +1,448 @@
+/*
+ *  Driver for the NXP SAA7164 PCIe bridge
+ *
+ *  Copyright (c) 2009 Steven Toth <stoth@kernellabs.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "saa7164.h"
+
+/* The message bus to/from the firmware is a ring buffer in PCI address
+ * space. Establish the defaults.
+ */
+int saa7164_bus_setup(struct saa7164_dev *dev)
+{
+	tmComResBusInfo_t *b	= &dev->bus;
+
+	mutex_init(&b->lock);
+
+	b->Type			= TYPE_BUS_PCIe;
+	b->m_wMaxReqSize	= SAA_DEVICE_MAXREQUESTSIZE;
+
+	b->m_pdwSetRing		= (u8 *)(dev->bmmio +
+		((u32)dev->busdesc.CommandRing));
+
+	b->m_dwSizeSetRing	= SAA_DEVICE_BUFFERBLOCKSIZE;
+
+	b->m_pdwGetRing		= (u8 *)(dev->bmmio +
+		((u32)dev->busdesc.ResponseRing));
+
+	b->m_dwSizeGetRing	= SAA_DEVICE_BUFFERBLOCKSIZE;
+
+	b->m_pdwSetWritePos	= (u32 *)((u8 *)(dev->bmmio +
+		((u32)dev->intfdesc.BARLocation) + (2 * sizeof(u64))));
+
+	b->m_pdwSetReadPos	= (u32 *)((u8 *)b->m_pdwSetWritePos +
+		1 * sizeof(u32));
+
+	b->m_pdwGetWritePos	= (u32 *)((u8 *)b->m_pdwSetWritePos +
+		2 * sizeof(u32));
+
+	b->m_pdwGetReadPos	= (u32 *)((u8 *)b->m_pdwSetWritePos +
+		3 * sizeof(u32));
+
+	return 0;
+}
+
+void saa7164_bus_dump(struct saa7164_dev *dev)
+{
+	tmComResBusInfo_t *b = &dev->bus;
+
+	dprintk(DBGLVL_BUS, "Dumping the bus structure:\n");
+	dprintk(DBGLVL_BUS, " .type             = %d\n", b->Type);
+	dprintk(DBGLVL_BUS, " .dev->bmmio       = 0x%p\n", dev->bmmio);
+	dprintk(DBGLVL_BUS, " .m_wMaxReqSize    = 0x%x\n", b->m_wMaxReqSize);
+	dprintk(DBGLVL_BUS, " .m_pdwSetRing     = 0x%p\n", b->m_pdwSetRing);
+	dprintk(DBGLVL_BUS, " .m_dwSizeSetRing  = 0x%x\n", b->m_dwSizeSetRing);
+	dprintk(DBGLVL_BUS, " .m_pdwGetRing     = 0x%p\n", b->m_pdwGetRing);
+	dprintk(DBGLVL_BUS, " .m_dwSizeGetRing  = 0x%x\n", b->m_dwSizeGetRing);
+
+	dprintk(DBGLVL_BUS, " .m_pdwSetWritePos = 0x%p (0x%08x)\n",
+		b->m_pdwSetWritePos, *b->m_pdwSetWritePos);
+
+	dprintk(DBGLVL_BUS, " .m_pdwSetReadPos  = 0x%p (0x%08x)\n",
+		b->m_pdwSetReadPos, *b->m_pdwSetReadPos);
+
+	dprintk(DBGLVL_BUS, " .m_pdwGetWritePos = 0x%p (0x%08x)\n",
+		b->m_pdwGetWritePos, *b->m_pdwGetWritePos);
+
+	dprintk(DBGLVL_BUS, " .m_pdwGetReadPos  = 0x%p (0x%08x)\n",
+		b->m_pdwGetReadPos, *b->m_pdwGetReadPos);
+}
+
+void saa7164_bus_dumpmsg(struct saa7164_dev *dev, tmComResInfo_t* m, void *buf)
+{
+	dprintk(DBGLVL_BUS, "Dumping msg structure:\n");
+	dprintk(DBGLVL_BUS, " .id               = %d\n",   m->id);
+	dprintk(DBGLVL_BUS, " .flags            = 0x%x\n", m->flags);
+	dprintk(DBGLVL_BUS, " .size             = 0x%x\n", m->size);
+	dprintk(DBGLVL_BUS, " .command          = 0x%x\n", m->command);
+	dprintk(DBGLVL_BUS, " .controlselector  = 0x%x\n", m->controlselector);
+	dprintk(DBGLVL_BUS, " .seqno            = %d\n",   m->seqno);
+	if (buf)
+		dprintk(DBGLVL_BUS, " .buffer (ignored)\n");
+}
+
+/*
+ * Places a command or a response on the bus. The implementation does not
+ * know if it is a command or a response it just places the data on the
+ * bus depending on the bus information given in the tmComResBusInfo_t
+ * structure. If the command or response does not fit into the bus ring
+ * buffer it will be refused.
+ *
+ * Return Value:
+ *  SAA_OK     The function executed successfully.
+ *  < 0        One or more members are not initialized.
+ */
+int saa7164_bus_set(struct saa7164_dev *dev, tmComResInfo_t* msg, void *buf)
+{
+	tmComResBusInfo_t *bus = &dev->bus;
+	u32 bytes_to_write, read_distance, timeout, curr_srp, curr_swp;
+	u32 new_swp, space_rem;
+	int ret = SAA_ERR_BAD_PARAMETER;
+
+	if (!msg) {
+		printk(KERN_ERR "%s() !msg\n", __func__);
+		return SAA_ERR_BAD_PARAMETER;
+	}
+
+	dprintk(DBGLVL_BUS, "%s()\n", __func__);
+
+	msg->size = cpu_to_le16(msg->size);
+	msg->command = cpu_to_le16(msg->command);
+	msg->controlselector = cpu_to_le16(msg->controlselector);
+
+	if (msg->size > dev->bus.m_wMaxReqSize) {
+		printk(KERN_ERR "%s() Exceeded dev->bus.m_wMaxReqSize\n",
+			__func__);
+		return SAA_ERR_BAD_PARAMETER;
+	}
+
+	if ((msg->size > 0) && (buf == 0)) {
+		printk(KERN_ERR "%s() Missing message buffer\n", __func__);
+		return SAA_ERR_BAD_PARAMETER;
+	}
+
+	/* Lock the bus from any other access */
+	mutex_lock(&bus->lock);
+
+	bytes_to_write = sizeof(*msg) + msg->size;
+	read_distance = 0;
+	timeout = SAA_BUS_TIMEOUT;
+	curr_srp = le32_to_cpu(*bus->m_pdwSetReadPos);
+	curr_swp = le32_to_cpu(*bus->m_pdwSetWritePos);
+
+	/* Deal with ring wrapping issues */
+	if (curr_srp > curr_swp)
+		/* The ring has not wrapped yet */
+		read_distance = curr_srp - curr_swp;
+	else
+		/* Deal with the wrapped ring */
+		read_distance = (curr_srp + bus->m_dwSizeSetRing) - curr_swp;
+
+	dprintk(DBGLVL_BUS, "%s() bytes_to_write = %d\n", __func__,
+		bytes_to_write);
+
+	dprintk(DBGLVL_BUS, "%s() read_distance = %d\n", __func__,
+		read_distance);
+
+	dprintk(DBGLVL_BUS, "%s() curr_srp = %x\n", __func__, curr_srp);
+	dprintk(DBGLVL_BUS, "%s() curr_swp = %x\n", __func__, curr_swp);
+
+	/* Process the msg and write the content onto the bus */
+	while (bytes_to_write >= read_distance) {
+
+		if (timeout-- == 0) {
+			printk(KERN_ERR "%s() bus timeout\n", __func__);
+			ret = SAA_ERR_NO_RESOURCES;
+			goto out;
+		}
+
+		/* TODO: Review this delay, efficient? */
+		/* Wait, allowing the hardware fetch time */
+		mdelay(1);
+
+		/* Check the space usage again */
+		curr_srp = le32_to_cpu(*bus->m_pdwSetReadPos);
+
+		/* Deal with ring wrapping issues */
+		if (curr_srp > curr_swp)
+			/* Read didn't wrap around the buffer */
+			read_distance = curr_srp - curr_swp;
+		else
+			/* Deal with the wrapped ring */
+			read_distance = (curr_srp + bus->m_dwSizeSetRing) -
+				curr_swp;
+
+	}
+
+	/* Calculate the new write position */
+	new_swp = curr_swp + bytes_to_write;
+
+	dprintk(DBGLVL_BUS, "%s() new_swp = %x\n", __func__, new_swp);
+	dprintk(DBGLVL_BUS, "%s() bus->m_dwSizeSetRing = %x\n", __func__,
+		bus->m_dwSizeSetRing);
+
+	/* Mental Note: line 462 tmmhComResBusPCIe.cpp */
+
+	/* Check if we're going to wrap again */
+	if (new_swp > bus->m_dwSizeSetRing) {
+
+		/* Ring wraps */
+		new_swp -= bus->m_dwSizeSetRing;
+
+		space_rem = bus->m_dwSizeSetRing - curr_swp;
+
+		dprintk(DBGLVL_BUS, "%s() space_rem = %x\n", __func__,
+			space_rem);
+
+		dprintk(DBGLVL_BUS, "%s() sizeof(*msg) = %lu\n", __func__,
+			sizeof(*msg));
+
+		if (space_rem < sizeof(*msg)) {
+			dprintk(DBGLVL_BUS, "%s() tr4\n", __func__);
+
+			/* Split the msg into pieces as the ring wraps */
+			memcpy(bus->m_pdwSetRing + curr_swp, msg, space_rem);
+			memcpy(bus->m_pdwSetRing, (u8 *)msg + space_rem,
+				sizeof(*msg) - space_rem);
+
+			memcpy(bus->m_pdwSetRing + sizeof(*msg) - space_rem,
+				buf, msg->size);
+
+		} else if (space_rem == sizeof(*msg)) {
+			dprintk(DBGLVL_BUS, "%s() tr5\n", __func__);
+
+			/* Additional data at the beginning of the ring */
+			memcpy(bus->m_pdwSetRing + curr_swp, msg, sizeof(*msg));
+			memcpy(bus->m_pdwSetRing, buf, msg->size);
+
+		} else {
+			/* Additional data wraps around the ring */
+			memcpy(bus->m_pdwSetRing + curr_swp, msg, sizeof(*msg));
+			if (msg->size > 0) {
+				memcpy(bus->m_pdwSetRing + curr_swp +
+					sizeof(*msg), buf, space_rem -
+					sizeof(*msg));
+				memcpy(bus->m_pdwSetRing, (u8 *)buf +
+					space_rem - sizeof(*msg),
+					bytes_to_write - space_rem);
+			}
+
+		}
+
+	} /* (new_swp > bus->m_dwSizeSetRing) */
+	else {
+		dprintk(DBGLVL_BUS, "%s() tr6\n", __func__);
+
+		/* The ring buffer doesn't wrap, two simple copies */
+		memcpy(bus->m_pdwSetRing + curr_swp, msg, sizeof(*msg));
+		memcpy(bus->m_pdwSetRing + curr_swp + sizeof(*msg), buf,
+			msg->size);
+	}
+
+	dprintk(DBGLVL_BUS, "%s() new_swp = %x\n", __func__, new_swp);
+
+	/* TODO: Convert all of the volatiles and direct PCI writes into
+	 * saa7164_writel/b calls for consistency.
+	 */
+
+	/* Update the bus write position */
+	*bus->m_pdwSetWritePos = cpu_to_le32(new_swp);
+	ret = SAA_OK;
+
+out:
+	mutex_unlock(&bus->lock);
+	return ret;
+}
+
+/*
+ * Receive a command or a response from the bus. The implementation does not
+ * know if it is a command or a response it simply dequeues the data,
+ * depending on the bus information given in the tmComResBusInfo_t structure.
+ *
+ * Return Value:
+ *  0          The function executed successfully.
+ *  < 0        One or more members are not initialized.
+ */
+int saa7164_bus_get(struct saa7164_dev *dev, tmComResInfo_t* msg, void *buf,
+	int peekonly)
+{
+	tmComResBusInfo_t *bus = &dev->bus;
+	u32 bytes_to_read, write_distance, curr_grp, curr_gwp,
+		new_grp, buf_size, space_rem;
+	tmComResInfo_t msg_tmp;
+	int ret = SAA_ERR_BAD_PARAMETER;
+
+	if (msg == 0)
+		return ret;
+
+	if (msg->size > dev->bus.m_wMaxReqSize) {
+		printk(KERN_ERR "%s() Exceeded dev->bus.m_wMaxReqSize\n",
+			__func__);
+		return ret;
+	}
+
+	if ((peekonly == 0) && (msg->size > 0) && (buf == 0)) {
+		printk(KERN_ERR
+			"%s() Missing msg buf, size should be %d bytes\n",
+			__func__, msg->size);
+		return ret;
+	}
+
+	mutex_lock(&bus->lock);
+
+	/* Peek the bus to see if a msg exists, if it's not what we're expecting
+	 * then return cleanly else read the message from the bus.
+	 */
+	curr_gwp = le32_to_cpu(*bus->m_pdwGetWritePos);
+	curr_grp = le32_to_cpu(*bus->m_pdwGetReadPos);
+
+	if (curr_gwp == curr_grp) {
+		dprintk(DBGLVL_BUS, "%s() No message on the bus\n", __func__);
+		ret = SAA_ERR_EMPTY;
+		goto out;
+	}
+
+	bytes_to_read = sizeof(*msg);
+
+	/* Calculate write distance to current read position */
+	write_distance = 0;
+	if (curr_gwp >= curr_grp)
+		/* Write doesn't wrap around the ring */
+		write_distance = curr_gwp - curr_grp;
+	else
+		/* Write wraps around the ring */
+		write_distance = curr_gwp + bus->m_dwSizeGetRing - curr_grp;
+
+	if (bytes_to_read > write_distance) {
+		printk(KERN_ERR "%s() No message/response found\n", __func__);
+		ret = SAA_ERR_INVALID_COMMAND;
+		goto out;
+	}
+
+	/* Calculate the new read position */
+	new_grp = curr_grp + bytes_to_read;
+	if (new_grp > bus->m_dwSizeGetRing) {
+
+		/* Ring wraps */
+		new_grp -= bus->m_dwSizeGetRing;
+		space_rem = bus->m_dwSizeGetRing - curr_grp;
+
+		memcpy(&msg_tmp, bus->m_pdwGetRing + curr_grp, space_rem);
+		memcpy((u8 *)&msg_tmp + space_rem, bus->m_pdwGetRing,
+			bytes_to_read - space_rem);
+
+	} else {
+		/* No wrapping */
+		memcpy(&msg_tmp, bus->m_pdwGetRing + curr_grp, bytes_to_read);
+	}
+
+	/* No need to update the read positions, because this was a peek */
+	/* If the caller specifically want to peek, return */
+	if (peekonly) {
+		memcpy(msg, &msg_tmp, sizeof(*msg));
+		goto peekout;
+	}
+
+	/* Check if the command/response matches what is expected */
+	if ((msg_tmp.id != msg->id) || (msg_tmp.command != msg->command) ||
+		(msg_tmp.controlselector != msg->controlselector) ||
+		(msg_tmp.seqno != msg->seqno) || (msg_tmp.size != msg->size)) {
+
+		printk(KERN_ERR "%s() Unexpected msg miss-match\n", __func__);
+		saa7164_bus_dumpmsg(dev, msg, buf);
+		saa7164_bus_dumpmsg(dev, &msg_tmp, 0);
+		ret = SAA_ERR_INVALID_COMMAND;
+		goto out;
+	}
+
+	/* Get the actual command and response from the bus */
+	buf_size = msg->size;
+
+	bytes_to_read = sizeof(*msg) + msg->size;
+	/* Calculate write distance to current read position */
+	write_distance = 0;
+	if (curr_gwp >= curr_grp)
+		/* Write doesn't wrap around the ring */
+		write_distance = curr_gwp - curr_grp;
+	else
+		/* Write wraps around the ring */
+		write_distance = curr_gwp + bus->m_dwSizeGetRing - curr_grp;
+
+	if (bytes_to_read > write_distance) {
+		printk(KERN_ERR "%s() Invalid bus state, missing msg "
+			"or mangled ring, faulty H/W / bad code?\n", __func__);
+		ret = SAA_ERR_INVALID_COMMAND;
+		goto out;
+	}
+
+	/* Calculate the new read position */
+	new_grp = curr_grp + bytes_to_read;
+	if (new_grp > bus->m_dwSizeGetRing) {
+
+		/* Ring wraps */
+		new_grp -= bus->m_dwSizeGetRing;
+		space_rem = bus->m_dwSizeGetRing - curr_grp;
+
+		if (space_rem < sizeof(*msg)) {
+			/* msg wraps around the ring */
+			memcpy(msg, bus->m_pdwGetRing + curr_grp, space_rem);
+			memcpy((u8 *)msg + space_rem, bus->m_pdwGetRing,
+				sizeof(*msg) - space_rem);
+			if (buf)
+				memcpy(buf, bus->m_pdwGetRing + sizeof(*msg) -
+					space_rem, buf_size);
+
+		} else if (space_rem == sizeof(*msg)) {
+			memcpy(msg, bus->m_pdwGetRing + curr_grp, sizeof(*msg));
+			if (buf)
+				memcpy(buf, bus->m_pdwGetRing, buf_size);
+		} else {
+			/* Additional data wraps around the ring */
+			memcpy(msg, bus->m_pdwGetRing + curr_grp, sizeof(*msg));
+			if (buf) {
+				memcpy(buf, bus->m_pdwGetRing + curr_grp +
+					sizeof(*msg), space_rem - sizeof(*msg));
+				memcpy(buf + space_rem - sizeof(*msg),
+					bus->m_pdwGetRing, bytes_to_read -
+					space_rem);
+			}
+
+		}
+
+	} else {
+		/* No wrapping */
+		memcpy(msg, bus->m_pdwGetRing + curr_grp, sizeof(*msg));
+		if (buf)
+			memcpy(buf, bus->m_pdwGetRing + curr_grp + sizeof(*msg),
+				buf_size);
+	}
+
+	/* Update the read positions, adjusting the ring */
+	*bus->m_pdwGetReadPos = cpu_to_le32(new_grp);
+
+peekout:
+	msg->size = le16_to_cpu(msg->size);
+	msg->command = le16_to_cpu(msg->command);
+	msg->controlselector = le16_to_cpu(msg->controlselector);
+	ret = SAA_OK;
+out:
+	mutex_unlock(&bus->lock);
+	return ret;
+}
+
diff --git a/drivers/media/video/saa7164/saa7164-cards.c b/drivers/media/video/saa7164/saa7164-cards.c
new file mode 100644
index 00000000000..0678b5f31bd
--- /dev/null
+++ b/drivers/media/video/saa7164/saa7164-cards.c
@@ -0,0 +1,562 @@
+/*
+ *  Driver for the NXP SAA7164 PCIe bridge
+ *
+ *  Copyright (c) 2009 Steven Toth <stoth@kernellabs.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+#include "saa7164.h"
+
+/* The Bridge API needs to understand register widths (in bytes) for the
+ * attached I2C devices, so we can simplify the virtual i2c mechansms
+ * and keep the -i2c.c implementation clean.
+ */
+#define REGLEN_8bit	1
+#define REGLEN_16bit	2
+
+struct saa7164_board saa7164_boards[] = {
+	[SAA7164_BOARD_UNKNOWN] = {
+		/* Bridge will not load any firmware, without knowing
+		 * the rev this would be fatal. */
+		.name		= "Unknown",
+	},
+	[SAA7164_BOARD_UNKNOWN_REV2] = {
+		/* Bridge will load the v2 f/w and dump descriptors */
+		/* Required during new board bringup */
+		.name		= "Generic Rev2",
+		.chiprev	= SAA7164_CHIP_REV2,
+	},
+	[SAA7164_BOARD_UNKNOWN_REV3] = {
+		/* Bridge will load the v2 f/w and dump descriptors */
+		/* Required during new board bringup */
+		.name		= "Generic Rev3",
+		.chiprev	= SAA7164_CHIP_REV3,
+	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2200] = {
+		.name		= "Hauppauge WinTV-HVR2200",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.chiprev	= SAA7164_CHIP_REV3,
+		.unit		= {{
+			.id		= 0x06,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1b,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1e,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x10 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1f,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x12 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		} },
+	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2200_2] = {
+		.name		= "Hauppauge WinTV-HVR2200",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.chiprev	= SAA7164_CHIP_REV2,
+		.unit		= {{
+			.id		= 0x06,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x05,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x10 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1e,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1f,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x12 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		} },
+	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2200_3] = {
+		.name		= "Hauppauge WinTV-HVR2200",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.chiprev	= SAA7164_CHIP_REV2,
+		.unit		= {{
+			.id		= 0x06,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x05,
+			.type		= SAA7164_UNIT_ANALOG_DEMODULATOR,
+			.name		= "TDA8290-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x84 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1b,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1c,
+			.type		= SAA7164_UNIT_ANALOG_DEMODULATOR,
+			.name		= "TDA8290-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x84 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1e,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x10 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1f,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x12 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		} },
+	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2250] = {
+		.name		= "Hauppauge WinTV-HVR2250",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.chiprev	= SAA7164_CHIP_REV3,
+		.unit		= {{
+			.id		= 0x22,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x07,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-1 (TOP)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x32 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x08,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-1 (QAM)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x34 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1e,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x20,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-2 (TOP)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x32 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x23,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-2 (QAM)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x34 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		} },
+	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2250_2] = {
+		.name		= "Hauppauge WinTV-HVR2250",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.chiprev	= SAA7164_CHIP_REV3,
+		.unit		= {{
+			.id		= 0x22,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x07,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-1 (TOP)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x32 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x08,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-1 (QAM)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x34 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x24,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x26,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-2 (TOP)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x32 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x29,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-2 (QAM)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x34 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		} },
+	},
+};
+const unsigned int saa7164_bcount = ARRAY_SIZE(saa7164_boards);
+
+/* ------------------------------------------------------------------ */
+/* PCI subsystem IDs                                                  */
+
+struct saa7164_subid saa7164_subids[] = {
+	{
+		.subvendor = 0x0070,
+		.subdevice = 0x8880,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2250,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8810,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2250,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8980,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2200,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8900,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2200_2,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8901,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2200_3,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x88A1,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2250_2,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8891,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2250_2,
+	},
+};
+const unsigned int saa7164_idcount = ARRAY_SIZE(saa7164_subids);
+
+void saa7164_card_list(struct saa7164_dev *dev)
+{
+	int i;
+
+	if (0 == dev->pci->subsystem_vendor &&
+	    0 == dev->pci->subsystem_device) {
+		printk(KERN_ERR
+			"%s: Board has no valid PCIe Subsystem ID and can't\n"
+			"%s: be autodetected. Pass card=<n> insmod option to\n"
+			"%s: workaround that. Send complaints to the vendor\n"
+			"%s: of the TV card. Best regards,\n"
+			"%s:         -- tux\n",
+			dev->name, dev->name, dev->name, dev->name, dev->name);
+	} else {
+		printk(KERN_ERR
+			"%s: Your board isn't known (yet) to the driver.\n"
+			"%s: Try to pick one of the existing card configs via\n"
+			"%s: card=<n> insmod option.  Updating to the latest\n"
+			"%s: version might help as well.\n",
+			dev->name, dev->name, dev->name, dev->name);
+	}
+
+	printk(KERN_ERR "%s: Here are valid choices for the card=<n> insmod "
+		"option:\n", dev->name);
+
+	for (i = 0; i < saa7164_bcount; i++)
+		printk(KERN_ERR "%s:    card=%d -> %s\n",
+		       dev->name, i, saa7164_boards[i].name);
+}
+
+/* TODO: clean this define up into the -cards.c structs */
+#define PCIEBRIDGE_UNITID 2
+
+void saa7164_gpio_setup(struct saa7164_dev *dev)
+{
+
+
+	switch (dev->board) {
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2250:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
+		/*
+		GPIO 2: s5h1411 / tda10048-1 demod reset
+		GPIO 3: s5h1411 / tda10048-2 demod reset
+		GPIO 7: IRBlaster Zilog reset
+		 */
+
+		/* Reset parts by going in and out of reset */
+		saa7164_api_clear_gpiobit(dev, PCIEBRIDGE_UNITID, 2);
+		saa7164_api_clear_gpiobit(dev, PCIEBRIDGE_UNITID, 3);
+
+		msleep(10);
+
+		saa7164_api_set_gpiobit(dev, PCIEBRIDGE_UNITID, 2);
+		saa7164_api_set_gpiobit(dev, PCIEBRIDGE_UNITID, 3);
+		break;
+	}
+
+}
+
+static void hauppauge_eeprom(struct saa7164_dev *dev, u8 *eeprom_data)
+{
+	struct tveeprom tv;
+
+	/* TODO: Assumption: eeprom on bus 0 */
+	tveeprom_hauppauge_analog(&dev->i2c_bus[0].i2c_client, &tv,
+		eeprom_data);
+
+	/* Make sure we support the board model */
+	switch (tv.model) {
+	case 88001:
+		/* Development board - Limit circulation */
+		/* WinTV-HVR2250 (PCIe, Retail, full-height bracket)
+		 * ATSC/QAM (TDA18271/S5H1411) and basic analog, no IR, FM */
+	case 88021:
+		/* WinTV-HVR2250 (PCIe, Retail, full-height bracket)
+		 * ATSC/QAM (TDA18271/S5H1411) and basic analog, MCE CIR, FM */
+		break;
+	case 88041:
+		/* WinTV-HVR2250 (PCIe, Retail, full-height bracket)
+		 * ATSC/QAM (TDA18271/S5H1411) and basic analog, no IR, FM */
+		break;
+	case 88061:
+		/* WinTV-HVR2250 (PCIe, Retail, full-height bracket)
+		 * ATSC/QAM (TDA18271/S5H1411) and basic analog, FM */
+		break;
+	case 89519:
+	case 89609:
+		/* WinTV-HVR2200 (PCIe, Retail, full-height)
+		 * DVB-T (TDA18271/TDA10048) and basic analog, no IR */
+		break;
+	case 89619:
+		/* WinTV-HVR2200 (PCIe, Retail, half-height)
+		 * DVB-T (TDA18271/TDA10048) and basic analog, no IR */
+		break;
+	default:
+		printk(KERN_ERR "%s: Warning: Unknown Hauppauge model #%d\n",
+			dev->name, tv.model);
+		break;
+	}
+
+	printk(KERN_INFO "%s: Hauppauge eeprom: model=%d\n", dev->name,
+		tv.model);
+}
+
+void saa7164_card_setup(struct saa7164_dev *dev)
+{
+	static u8 eeprom[256];
+
+	if (dev->i2c_bus[0].i2c_rc == 0) {
+		if (saa7164_api_read_eeprom(dev, &eeprom[0],
+			sizeof(eeprom)) < 0)
+			return;
+	}
+
+	switch (dev->board) {
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2250:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
+		hauppauge_eeprom(dev, &eeprom[0]);
+		break;
+	}
+}
+
+/* With most other drivers, the kernel expects to communicate with subdrivers
+ * through i2c. This bridge does not allow that, it does not expose any direct
+ * access to I2C. Instead we have to communicate through the device f/w for
+ * register access to 'processing units'. Each unit has a unique
+ * id, regardless of how the physical implementation occurs across
+ * the three physical i2c busses. The being said if we want leverge of
+ * the existing kernel drivers for tuners and demods we have to 'speak i2c',
+ * to this bridge implements 3 virtual i2c buses. This is a helper function
+ * for those.
+ *
+ * Description: Translate the kernels notion of an i2c address and bus into
+ * the appropriate unitid.
+ */
+int saa7164_i2caddr_to_unitid(struct saa7164_i2c *bus, int addr)
+{
+	/* For a given bus and i2c device address, return the saa7164 unique
+	 * unitid. < 0 on error */
+
+	struct saa7164_dev *dev = bus->dev;
+	struct saa7164_unit *unit;
+	int i;
+
+	for (i = 0; i < SAA7164_MAX_UNITS; i++) {
+		unit = &saa7164_boards[dev->board].unit[i];
+
+		if (unit->type == SAA7164_UNIT_UNDEFINED)
+			continue;
+		if ((bus->nr == unit->i2c_bus_nr) &&
+			(addr == unit->i2c_bus_addr))
+			return unit->id;
+	}
+
+	return -1;
+}
+
+/* The 7164 API needs to know the i2c register length in advance.
+ * this is a helper function. Based on a specific chip addr and bus return the
+ * reg length.
+ */
+int saa7164_i2caddr_to_reglen(struct saa7164_i2c *bus, int addr)
+{
+	/* For a given bus and i2c device address, return the
+	 * saa7164 registry address width. < 0 on error
+	 */
+
+	struct saa7164_dev *dev = bus->dev;
+	struct saa7164_unit *unit;
+	int i;
+
+	for (i = 0; i < SAA7164_MAX_UNITS; i++) {
+		unit = &saa7164_boards[dev->board].unit[i];
+
+		if (unit->type == SAA7164_UNIT_UNDEFINED)
+			continue;
+
+		if ((bus->nr == unit->i2c_bus_nr) &&
+			(addr == unit->i2c_bus_addr))
+			return unit->i2c_reg_len;
+	}
+
+	return -1;
+}
+/* TODO: implement a 'findeeprom' functio like the above and fix any other
+ * eeprom related todo's in -api.c.
+ */
+
+/* Translate a unitid into a x readable device name, for display purposes.  */
+char *saa7164_unitid_name(struct saa7164_dev *dev, u8 unitid)
+{
+	char *undefed = "UNDEFINED";
+	char *bridge = "BRIDGE";
+	struct saa7164_unit *unit;
+	int i;
+
+	if (unitid == 0)
+		return bridge;
+
+	for (i = 0; i < SAA7164_MAX_UNITS; i++) {
+		unit = &saa7164_boards[dev->board].unit[i];
+
+		if (unit->type == SAA7164_UNIT_UNDEFINED)
+			continue;
+
+		if (unitid == unit->id)
+				return unit->name;
+	}
+
+	return undefed;
+}
+
diff --git a/drivers/media/video/saa7164/saa7164-cmd.c b/drivers/media/video/saa7164/saa7164-cmd.c
new file mode 100644
index 00000000000..0c3585bb232
--- /dev/null
+++ b/drivers/media/video/saa7164/saa7164-cmd.c
@@ -0,0 +1,529 @@
+/*
+ *  Driver for the NXP SAA7164 PCIe bridge
+ *
+ *  Copyright (c) 2009 Steven Toth <stoth@kernellabs.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/wait.h>
+
+#include "saa7164.h"
+
+int saa7164_cmd_alloc_seqno(struct saa7164_dev *dev)
+{
+	int i, ret = -1;
+
+	mutex_lock(&dev->lock);
+	for (i = 0; i < SAA_CMD_MAX_MSG_UNITS; i++) {
+		if (dev->cmds[i].inuse == 0) {
+			dev->cmds[i].inuse = 1;
+			dev->cmds[i].signalled = 0;
+			dev->cmds[i].timeout = 0;
+			ret = dev->cmds[i].seqno;
+			break;
+		}
+	}
+	mutex_unlock(&dev->lock);
+
+	return ret;
+}
+
+void saa7164_cmd_free_seqno(struct saa7164_dev *dev, u8 seqno)
+{
+	mutex_lock(&dev->lock);
+	if ((dev->cmds[seqno].inuse == 1) &&
+		(dev->cmds[seqno].seqno == seqno)) {
+		dev->cmds[seqno].inuse = 0;
+		dev->cmds[seqno].signalled = 0;
+		dev->cmds[seqno].timeout = 0;
+	}
+	mutex_unlock(&dev->lock);
+}
+
+void saa7164_cmd_timeout_seqno(struct saa7164_dev *dev, u8 seqno)
+{
+	mutex_lock(&dev->lock);
+	if ((dev->cmds[seqno].inuse == 1) &&
+		(dev->cmds[seqno].seqno == seqno)) {
+		dev->cmds[seqno].timeout = 1;
+	}
+	mutex_unlock(&dev->lock);
+}
+
+u32 saa7164_cmd_timeout_get(struct saa7164_dev *dev, u8 seqno)
+{
+	int ret = 0;
+
+	mutex_lock(&dev->lock);
+	if ((dev->cmds[seqno].inuse == 1) &&
+		(dev->cmds[seqno].seqno == seqno)) {
+		ret = dev->cmds[seqno].timeout;
+	}
+	mutex_unlock(&dev->lock);
+
+	return ret;
+}
+
+/* Commands to the f/w get marshelled to/from this code then onto the PCI
+ * -bus/c running buffer. */
+int saa7164_cmd_dequeue(struct saa7164_dev *dev)
+{
+	int loop = 1;
+	int ret;
+	u32 timeout;
+	wait_queue_head_t *q = 0;
+	u8 tmp[512];
+	dprintk(DBGLVL_CMD, "%s()\n", __func__);
+
+	while (loop) {
+
+		tmComResInfo_t tRsp = { 0, 0, 0, 0, 0, 0 };
+		ret = saa7164_bus_get(dev, &tRsp, NULL, 1);
+		if (ret == SAA_ERR_EMPTY)
+			return SAA_OK;
+
+		if (ret != SAA_OK)
+			return ret;
+
+		q = &dev->cmds[tRsp.seqno].wait;
+		timeout = saa7164_cmd_timeout_get(dev, tRsp.seqno);
+		dprintk(DBGLVL_CMD, "%s() timeout = %d\n", __func__, timeout);
+		if (timeout) {
+			printk(KERN_ERR "found timed out command on the bus\n");
+
+			/* Clean the bus */
+			ret = saa7164_bus_get(dev, &tRsp, &tmp, 0);
+			printk(KERN_ERR "ret = %x\n", ret);
+			if (ret == SAA_ERR_EMPTY)
+				/* Someone else already fetched the response */
+				return SAA_OK;
+
+			if (ret != SAA_OK)
+				return ret;
+
+			if (tRsp.flags & PVC_CMDFLAG_CONTINUE)
+				printk(KERN_ERR "split response\n");
+			else
+				saa7164_cmd_free_seqno(dev, tRsp.seqno);
+
+			printk(KERN_ERR " timeout continue\n");
+			continue;
+		}
+
+		dprintk(DBGLVL_CMD, "%s() signalled seqno(%d) (for dequeue)\n",
+			__func__, tRsp.seqno);
+		dev->cmds[tRsp.seqno].signalled = 1;
+		wake_up(q);
+		return SAA_OK;
+	}
+
+	return SAA_OK;
+}
+
+int saa7164_cmd_set(struct saa7164_dev *dev, tmComResInfo_t* msg, void *buf)
+{
+	tmComResBusInfo_t *bus = &dev->bus;
+	u8 cmd_sent;
+	u16 size, idx;
+	u32 cmds;
+	void *tmp;
+	int ret = -1;
+
+	if (!msg) {
+		printk(KERN_ERR "%s() !msg\n", __func__);
+		return SAA_ERR_BAD_PARAMETER;
+	}
+
+	mutex_lock(&dev->cmds[msg->id].lock);
+
+	size = msg->size;
+	idx = 0;
+	cmds = size / bus->m_wMaxReqSize;
+	if (size % bus->m_wMaxReqSize == 0)
+		cmds -= 1;
+
+	cmd_sent = 0;
+
+	/* Split the request into smaller chunks */
+	for (idx = 0; idx < cmds; idx++) {
+
+		msg->flags |= SAA_CMDFLAG_CONTINUE;
+		msg->size = bus->m_wMaxReqSize;
+		tmp = buf + idx * bus->m_wMaxReqSize;
+
+		ret = saa7164_bus_set(dev, msg, tmp);
+		if (ret != SAA_OK) {
+			printk(KERN_ERR "%s() set failed %d\n", __func__, ret);
+
+			if (cmd_sent) {
+				ret = SAA_ERR_BUSY;
+				goto out;
+			}
+			ret = SAA_ERR_OVERFLOW;
+			goto out;
+		}
+		cmd_sent = 1;
+	}
+
+	/* If not the last command... */
+	if (idx != 0)
+		msg->flags &= ~SAA_CMDFLAG_CONTINUE;
+
+	msg->size = size - idx * bus->m_wMaxReqSize;
+
+	ret = saa7164_bus_set(dev, msg, buf + idx * bus->m_wMaxReqSize);
+	if (ret != SAA_OK) {
+		printk(KERN_ERR "%s() set last failed %d\n", __func__, ret);
+
+		if (cmd_sent) {
+			ret = SAA_ERR_BUSY;
+			goto out;
+		}
+		ret = SAA_ERR_OVERFLOW;
+		goto out;
+	}
+	ret = SAA_OK;
+
+out:
+	mutex_unlock(&dev->cmds[msg->id].lock);
+	return ret;
+}
+
+/* Wait for a signal event, without holding a mutex. Either return TIMEOUT if
+ * the event never occured, or SAA_OK if it was signaled during the wait.
+ */
+int saa7164_cmd_wait(struct saa7164_dev *dev, u8 seqno)
+{
+	wait_queue_head_t *q = 0;
+	int ret = SAA_BUS_TIMEOUT;
+	unsigned long stamp;
+	int r;
+
+	if (debug >= 4)
+		saa7164_bus_dump(dev);
+
+	dprintk(DBGLVL_CMD, "%s(seqno=%d)\n", __func__, seqno);
+
+	mutex_lock(&dev->lock);
+	if ((dev->cmds[seqno].inuse == 1) &&
+		(dev->cmds[seqno].seqno == seqno)) {
+		q = &dev->cmds[seqno].wait;
+	}
+	mutex_unlock(&dev->lock);
+
+	if (q) {
+		/* If we haven't been signalled we need to wait */
+		if (dev->cmds[seqno].signalled == 0) {
+			stamp = jiffies;
+			dprintk(DBGLVL_CMD,
+				"%s(seqno=%d) Waiting (signalled=%d)\n",
+				__func__, seqno, dev->cmds[seqno].signalled);
+
+			/* Wait for signalled to be flagged or timeout */
+			wait_event_timeout(*q, dev->cmds[seqno].signalled, HZ);
+			r = time_before(jiffies, stamp + HZ);
+			if (r)
+				ret = SAA_OK;
+			else
+				saa7164_cmd_timeout_seqno(dev, seqno);
+
+			dprintk(DBGLVL_CMD, "%s(seqno=%d) Waiting res = %d "
+				"(signalled=%d)\n", __func__, seqno, r,
+				dev->cmds[seqno].signalled);
+		} else
+			ret = SAA_OK;
+	} else
+		printk(KERN_ERR "%s(seqno=%d) seqno is invalid\n",
+			__func__, seqno);
+
+	return ret;
+}
+
+void saa7164_cmd_signal(struct saa7164_dev *dev, u8 seqno)
+{
+	int i;
+	dprintk(DBGLVL_CMD, "%s()\n", __func__);
+
+	mutex_lock(&dev->lock);
+	for (i = 0; i < SAA_CMD_MAX_MSG_UNITS; i++) {
+		if (dev->cmds[i].inuse == 1) {
+			dprintk(DBGLVL_CMD,
+				"seqno %d inuse, sig = %d, t/out = %d\n",
+				dev->cmds[i].seqno,
+				dev->cmds[i].signalled,
+				dev->cmds[i].timeout);
+		}
+	}
+
+	for (i = 0; i < SAA_CMD_MAX_MSG_UNITS; i++) {
+		if ((dev->cmds[i].inuse == 1) && ((i == 0) ||
+			(dev->cmds[i].signalled) || (dev->cmds[i].timeout))) {
+			dprintk(DBGLVL_CMD, "%s(seqno=%d) calling wake_up\n",
+				__func__, i);
+			dev->cmds[i].signalled = 1;
+			wake_up(&dev->cmds[i].wait);
+		}
+	}
+	mutex_unlock(&dev->lock);
+}
+
+int saa7164_cmd_send(struct saa7164_dev *dev, u8 id, tmComResCmd_t command,
+	u16 controlselector, u16 size, void *buf)
+{
+	tmComResInfo_t command_t, *pcommand_t;
+	tmComResInfo_t response_t, *presponse_t;
+	u8 errdata[256];
+	u16 resp_dsize;
+	u16 data_recd;
+	u32 loop;
+	int ret;
+	int safety = 0;
+
+	dprintk(DBGLVL_CMD, "%s(unitid = %s (%d) , command = 0x%x, "
+		"sel = 0x%x)\n", __func__, saa7164_unitid_name(dev, id), id,
+		command, controlselector);
+
+	if ((size == 0) || (buf == 0)) {
+		printk(KERN_ERR "%s() Invalid param\n", __func__);
+		return SAA_ERR_BAD_PARAMETER;
+	}
+
+	/* Prepare some basic command/response structures */
+	memset(&command_t, 0, sizeof(command_t));
+	memset(&response_t, 0, sizeof(&response_t));
+	pcommand_t = &command_t;
+	presponse_t = &response_t;
+	command_t.id = id;
+	command_t.command = command;
+	command_t.controlselector = controlselector;
+	command_t.size = size;
+
+	/* Allocate a unique sequence number */
+	ret = saa7164_cmd_alloc_seqno(dev);
+	if (ret < 0) {
+		printk(KERN_ERR "%s() No free sequences\n", __func__);
+		ret = SAA_ERR_NO_RESOURCES;
+		goto out;
+	}
+
+	command_t.seqno = (u8)ret;
+
+	/* Send Command */
+	resp_dsize = size;
+	pcommand_t->size = size;
+
+	dprintk(DBGLVL_CMD, "%s() pcommand_t.seqno = %d\n",
+		__func__, pcommand_t->seqno);
+
+	dprintk(DBGLVL_CMD, "%s() pcommand_t.size = %d\n",
+		__func__, pcommand_t->size);
+
+	ret = saa7164_cmd_set(dev, pcommand_t, buf);
+	if (ret != SAA_OK) {
+		printk(KERN_ERR "%s() set command failed %d\n", __func__, ret);
+
+		if (ret != SAA_ERR_BUSY)
+			saa7164_cmd_free_seqno(dev, pcommand_t->seqno);
+		else
+			/* Flag a timeout, because at least one
+			 * command was sent */
+			saa7164_cmd_timeout_seqno(dev, pcommand_t->seqno);
+
+		goto out;
+	}
+
+	/* With split responses we have to collect the msgs piece by piece */
+	data_recd = 0;
+	loop = 1;
+	while (loop) {
+		dprintk(DBGLVL_CMD, "%s() loop\n", __func__);
+
+		ret = saa7164_cmd_wait(dev, pcommand_t->seqno);
+		dprintk(DBGLVL_CMD, "%s() loop ret = %d\n", __func__, ret);
+
+		/* if power is down and this is not a power command ... */
+
+		if (ret == SAA_BUS_TIMEOUT) {
+			printk(KERN_ERR "Event timed out\n");
+			saa7164_cmd_timeout_seqno(dev, pcommand_t->seqno);
+			return ret;
+		}
+
+		if (ret != SAA_OK) {
+			printk(KERN_ERR "spurious error\n");
+			return ret;
+		}
+
+		/* Peek response */
+		ret = saa7164_bus_get(dev, presponse_t, NULL, 1);
+		if (ret == SAA_ERR_EMPTY) {
+			dprintk(4, "%s() SAA_ERR_EMPTY\n", __func__);
+			continue;
+		}
+		if (ret != SAA_OK) {
+			printk(KERN_ERR "peek failed\n");
+			return ret;
+		}
+
+		dprintk(DBGLVL_CMD, "%s() presponse_t->seqno = %d\n",
+			__func__, presponse_t->seqno);
+
+		dprintk(DBGLVL_CMD, "%s() presponse_t->flags = 0x%x\n",
+			__func__, presponse_t->flags);
+
+		dprintk(DBGLVL_CMD, "%s() presponse_t->size = %d\n",
+			__func__, presponse_t->size);
+
+		/* Check if the response was for our command */
+		if (presponse_t->seqno != pcommand_t->seqno) {
+
+			dprintk(DBGLVL_CMD,
+				"wrong event: seqno = %d, "
+				"expected seqno = %d, "
+				"will dequeue regardless\n",
+				presponse_t->seqno, pcommand_t->seqno);
+
+			ret = saa7164_cmd_dequeue(dev);
+			if (ret != SAA_OK) {
+				printk(KERN_ERR "dequeue failed, ret = %d\n",
+					ret);
+				if (safety++ > 16) {
+					printk(KERN_ERR
+					"dequeue exceeded, safety exit\n");
+					return SAA_ERR_BUSY;
+				}
+			}
+
+			continue;
+		}
+
+		if ((presponse_t->flags & PVC_RESPONSEFLAG_ERROR) != 0) {
+
+			memset(&errdata[0], 0, sizeof(errdata));
+
+			ret = saa7164_bus_get(dev, presponse_t, &errdata[0], 0);
+			if (ret != SAA_OK) {
+				printk(KERN_ERR "get error(2)\n");
+				return ret;
+			}
+
+			saa7164_cmd_free_seqno(dev, pcommand_t->seqno);
+
+			dprintk(DBGLVL_CMD, "%s() errdata %02x%02x%02x%02x\n",
+				__func__, errdata[0], errdata[1], errdata[2],
+				errdata[3]);
+
+			/* Map error codes */
+			dprintk(DBGLVL_CMD, "%s() cmd, error code  = 0x%x\n",
+				__func__, errdata[0]);
+
+			switch (errdata[0]) {
+			case PVC_ERRORCODE_INVALID_COMMAND:
+				dprintk(DBGLVL_CMD, "%s() INVALID_COMMAND\n",
+					__func__);
+				ret = SAA_ERR_INVALID_COMMAND;
+				break;
+			case PVC_ERRORCODE_INVALID_DATA:
+				dprintk(DBGLVL_CMD, "%s() INVALID_DATA\n",
+					__func__);
+				ret = SAA_ERR_BAD_PARAMETER;
+				break;
+			case PVC_ERRORCODE_TIMEOUT:
+				dprintk(DBGLVL_CMD, "%s() TIMEOUT\n", __func__);
+				ret = SAA_ERR_TIMEOUT;
+				break;
+			case PVC_ERRORCODE_NAK:
+				dprintk(DBGLVL_CMD, "%s() NAK\n", __func__);
+				ret = SAA_ERR_NULL_PACKET;
+				break;
+			case PVC_ERRORCODE_UNKNOWN:
+			case PVC_ERRORCODE_INVALID_CONTROL:
+				dprintk(DBGLVL_CMD,
+					"%s() UNKNOWN OR INVALID CONTROL\n",
+					__func__);
+			default:
+				dprintk(DBGLVL_CMD, "%s() UNKNOWN\n", __func__);
+				ret = SAA_ERR_NOT_SUPPORTED;
+			}
+
+			/* See of other commands are on the bus */
+			if (saa7164_cmd_dequeue(dev) != SAA_OK)
+				printk(KERN_ERR "dequeue(2) failed\n");
+
+			return ret;
+		}
+
+		/* If response is invalid */
+		if ((presponse_t->id != pcommand_t->id) ||
+			(presponse_t->command != pcommand_t->command) ||
+			(presponse_t->controlselector !=
+				pcommand_t->controlselector) ||
+			(((resp_dsize - data_recd) != presponse_t->size) &&
+				!(presponse_t->flags & PVC_CMDFLAG_CONTINUE)) ||
+			((resp_dsize - data_recd) < presponse_t->size)) {
+
+			/* Invalid */
+			dprintk(DBGLVL_CMD, "%s() Invalid\n", __func__);
+			ret = saa7164_bus_get(dev, presponse_t, 0, 0);
+			if (ret != SAA_OK) {
+				printk(KERN_ERR "get failed\n");
+				return ret;
+			}
+
+			/* See of other commands are on the bus */
+			if (saa7164_cmd_dequeue(dev) != SAA_OK)
+				printk(KERN_ERR "dequeue(3) failed\n");
+			continue;
+		}
+
+		/* OK, now we're actually getting out correct response */
+		ret = saa7164_bus_get(dev, presponse_t, buf + data_recd, 0);
+		if (ret != SAA_OK) {
+			printk(KERN_ERR "get failed\n");
+			return ret;
+		}
+
+		data_recd = presponse_t->size + data_recd;
+		if (resp_dsize == data_recd) {
+			dprintk(DBGLVL_CMD, "%s() Resp recd\n", __func__);
+			break;
+		}
+
+		/* See of other commands are on the bus */
+		if (saa7164_cmd_dequeue(dev) != SAA_OK)
+			printk(KERN_ERR "dequeue(3) failed\n");
+
+		continue;
+
+	} /* (loop) */
+
+	/* Release the sequence number allocation */
+	saa7164_cmd_free_seqno(dev, pcommand_t->seqno);
+
+	/* if powerdown signal all pending commands */
+
+	dprintk(DBGLVL_CMD, "%s() Calling dequeue then exit\n", __func__);
+
+	/* See of other commands are on the bus */
+	if (saa7164_cmd_dequeue(dev) != SAA_OK)
+		printk(KERN_ERR "dequeue(4) failed\n");
+
+	ret = SAA_OK;
+out:
+	return ret;
+}
+
diff --git a/drivers/media/video/saa7164/saa7164-core.c b/drivers/media/video/saa7164/saa7164-core.c
new file mode 100644
index 00000000000..04957090f83
--- /dev/null
+++ b/drivers/media/video/saa7164/saa7164-core.c
@@ -0,0 +1,746 @@
+/*
+ *  Driver for the NXP SAA7164 PCIe bridge
+ *
+ *  Copyright (c) 2009 Steven Toth <stoth@kernellabs.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kmod.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <asm/div64.h>
+
+#include "saa7164.h"
+
+MODULE_DESCRIPTION("Driver for NXP SAA7164 based TV cards");
+MODULE_AUTHOR("Steven Toth <stoth@hauppauge.com>");
+MODULE_LICENSE("GPL");
+
+/*
+  1 Basic
+  2
+  4 i2c
+  8 api
+ 16 cmd
+ 32 bus
+ */
+
+unsigned int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "enable debug messages");
+
+static unsigned int card[]  = {[0 ... (SAA7164_MAXBOARDS - 1)] = UNSET };
+module_param_array(card,  int, NULL, 0444);
+MODULE_PARM_DESC(card, "card type");
+
+static unsigned int saa7164_devcount;
+
+static DEFINE_MUTEX(devlist);
+LIST_HEAD(saa7164_devlist);
+
+#define INT_SIZE 16
+
+static void saa7164_work_cmdhandler(struct work_struct *w)
+{
+	struct saa7164_dev *dev = container_of(w, struct saa7164_dev, workcmd);
+
+	/* Wake up any complete commands */
+	saa7164_cmd_signal(dev, 0);
+}
+
+static void saa7164_buffer_deliver(struct saa7164_buffer *buf)
+{
+	struct saa7164_tsport *port = buf->port;
+
+	/* Feed the transport payload into the kernel demux */
+	dvb_dmx_swfilter_packets(&port->dvb.demux, buf->cpu,
+		SAA7164_TS_NUMBER_OF_LINES);
+
+}
+
+static irqreturn_t saa7164_irq_ts(struct saa7164_tsport *port)
+{
+	struct saa7164_dev *dev = port->dev;
+	struct saa7164_buffer *buf;
+	struct list_head *c, *n;
+	int wp, i = 0, rp;
+
+	/* Find the current write point from the hardware */
+	wp = saa7164_readl(port->bufcounter);
+	if (wp > (port->hwcfg.buffercount - 1))
+		BUG();
+
+	/* Find the previous buffer to the current write point */
+	if (wp == 0)
+		rp = 7;
+	else
+		rp = wp - 1;
+
+	/* Lookup the WP in the buffer list */
+	/* TODO: turn this into a worker thread */
+	list_for_each_safe(c, n, &port->dmaqueue.list) {
+		buf = list_entry(c, struct saa7164_buffer, list);
+		if (i++ > port->hwcfg.buffercount)
+			BUG();
+
+		if (buf->nr == rp) {
+			/* Found the buffer, deal with it */
+			dprintk(DBGLVL_IRQ, "%s() wp: %d processing: %d\n",
+				__func__, wp, rp);
+			saa7164_buffer_deliver(buf);
+			break;
+		}
+
+	}
+	return 0;
+}
+
+/* Primary IRQ handler and dispatch mechanism */
+static irqreturn_t saa7164_irq(int irq, void *dev_id)
+{
+	struct saa7164_dev *dev = dev_id;
+	u32 hwacc = 0, interruptid;
+	u32 intstat[INT_SIZE/4];
+	int i, handled = 0, bit;
+
+	/* Check that the hardware is accessable. If the status bytes are
+	 * 0xFF then the device is not accessable, the the IRQ belongs
+	 * to another driver.
+	 */
+	for (i = 0; i < INT_SIZE/4; i++) {
+
+		/* TODO: Convert into saa7164_readl() */
+		/* Read the 4 hardware interrupt registers */
+		intstat[i] = *(dev->InterruptStatus + i);
+
+		if (intstat[i] != 0xffffffff)
+			hwacc = 1;
+	}
+	if (hwacc == 0) {
+		handled = 0;
+		goto out;
+	}
+
+	handled = 1;
+
+	/* For each of the HW interrupt registers */
+	for (i = 0; i < INT_SIZE/4; i++) {
+
+		if (intstat[i]) {
+			/* Each function of the board has it's own interruptid.
+			 * Find the function that triggered then call
+			 * it's handler.
+			 */
+			for (bit = 0; bit < 32; bit++) {
+
+				if (((intstat[i] >> bit) & 0x00000001) == 0)
+					continue;
+
+				/* Calculate the interrupt id (0x00 to 0x7f) */
+
+				interruptid = (i * 32) + bit;
+				if (interruptid == dev->intfdesc.bInterruptId) {
+					/* A response to an cmd/api call */
+					schedule_work(&dev->workcmd);
+				} else if (interruptid ==
+					dev->ts1.hwcfg.interruptid) {
+
+					/* Transport path 1 */
+					saa7164_irq_ts(&dev->ts1);
+
+				} else if (interruptid ==
+					dev->ts2.hwcfg.interruptid) {
+
+					/* Transport path 2 */
+					saa7164_irq_ts(&dev->ts2);
+
+				} else {
+					/* Find the function */
+					dprintk(DBGLVL_IRQ,
+						"%s() unhandled interrupt "
+						"reg 0x%x bit 0x%x "
+						"intid = 0x%x\n",
+						__func__, i, bit, interruptid);
+				}
+			}
+
+			/* TODO: Convert into saa7164_writel() */
+			/* Ack it */
+			*(dev->InterruptAck + i) = intstat[i];
+
+		}
+	}
+out:
+	return IRQ_RETVAL(handled);
+}
+
+void saa7164_getfirmwarestatus(struct saa7164_dev *dev)
+{
+	struct saa7164_fw_status *s = &dev->fw_status;
+
+	dev->fw_status.status = saa7164_readl(SAA_DEVICE_SYSINIT_STATUS);
+	dev->fw_status.mode = saa7164_readl(SAA_DEVICE_SYSINIT_MODE);
+	dev->fw_status.spec = saa7164_readl(SAA_DEVICE_SYSINIT_SPEC);
+	dev->fw_status.inst = saa7164_readl(SAA_DEVICE_SYSINIT_INST);
+	dev->fw_status.cpuload = saa7164_readl(SAA_DEVICE_SYSINIT_CPULOAD);
+	dev->fw_status.remainheap =
+		saa7164_readl(SAA_DEVICE_SYSINIT_REMAINHEAP);
+
+	dprintk(1, "Firmware status:\n");
+	dprintk(1, " .status     = 0x%08x\n", s->status);
+	dprintk(1, " .mode       = 0x%08x\n", s->mode);
+	dprintk(1, " .spec       = 0x%08x\n", s->spec);
+	dprintk(1, " .inst       = 0x%08x\n", s->inst);
+	dprintk(1, " .cpuload    = 0x%08x\n", s->cpuload);
+	dprintk(1, " .remainheap = 0x%08x\n", s->remainheap);
+}
+
+u32 saa7164_getcurrentfirmwareversion(struct saa7164_dev *dev)
+{
+	u32 reg;
+
+	reg = saa7164_readl(SAA_DEVICE_VERSION);
+	dprintk(1, "Device running firmware version %d.%d.%d.%d (0x%x)\n",
+		(reg & 0x0000fc00) >> 10,
+		(reg & 0x000003e0) >> 5,
+		(reg & 0x0000001f),
+		(reg & 0xffff0000) >> 16,
+		reg);
+
+	return reg;
+}
+
+/* TODO: Debugging func, remove */
+void saa7164_dumphex16(struct saa7164_dev *dev, u8 *buf, int len)
+{
+	int i;
+
+	printk(KERN_INFO "--------------------> "
+		"00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f\n");
+
+	for (i = 0; i < len; i += 16)
+		printk(KERN_INFO "         [0x%08x] "
+			"%02x %02x %02x %02x %02x %02x %02x %02x "
+			"%02x %02x %02x %02x %02x %02x %02x %02x\n", i,
+		*(buf+i+0), *(buf+i+1), *(buf+i+2), *(buf+i+3),
+		*(buf+i+4), *(buf+i+5), *(buf+i+6), *(buf+i+7),
+		*(buf+i+8), *(buf+i+9), *(buf+i+10), *(buf+i+11),
+		*(buf+i+12), *(buf+i+13), *(buf+i+14), *(buf+i+15));
+}
+
+/* TODO: Debugging func, remove */
+void saa7164_dumpregs(struct saa7164_dev *dev, u32 addr)
+{
+	int i;
+
+	dprintk(1, "--------------------> "
+		"00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f\n");
+
+	for (i = 0; i < 0x100; i += 16)
+		dprintk(1, "region0[0x%08x] = "
+			"%02x %02x %02x %02x %02x %02x %02x %02x"
+			" %02x %02x %02x %02x %02x %02x %02x %02x\n", i,
+			(u8)saa7164_readb(addr + i + 0),
+			(u8)saa7164_readb(addr + i + 1),
+			(u8)saa7164_readb(addr + i + 2),
+			(u8)saa7164_readb(addr + i + 3),
+			(u8)saa7164_readb(addr + i + 4),
+			(u8)saa7164_readb(addr + i + 5),
+			(u8)saa7164_readb(addr + i + 6),
+			(u8)saa7164_readb(addr + i + 7),
+			(u8)saa7164_readb(addr + i + 8),
+			(u8)saa7164_readb(addr + i + 9),
+			(u8)saa7164_readb(addr + i + 10),
+			(u8)saa7164_readb(addr + i + 11),
+			(u8)saa7164_readb(addr + i + 12),
+			(u8)saa7164_readb(addr + i + 13),
+			(u8)saa7164_readb(addr + i + 14),
+			(u8)saa7164_readb(addr + i + 15)
+			);
+}
+
+static void saa7164_dump_hwdesc(struct saa7164_dev *dev)
+{
+	dprintk(1, "@0x%p hwdesc sizeof(tmComResHWDescr_t) = %lu bytes\n",
+		&dev->hwdesc, sizeof(tmComResHWDescr_t));
+
+	dprintk(1, " .bLength = 0x%x\n", dev->hwdesc.bLength);
+	dprintk(1, " .bDescriptorType = 0x%x\n", dev->hwdesc.bDescriptorType);
+	dprintk(1, " .bDescriptorSubtype = 0x%x\n",
+		dev->hwdesc.bDescriptorSubtype);
+
+	dprintk(1, " .bcdSpecVersion = 0x%x\n", dev->hwdesc.bcdSpecVersion);
+	dprintk(1, " .dwClockFrequency = 0x%x\n", dev->hwdesc.dwClockFrequency);
+	dprintk(1, " .dwClockUpdateRes = 0x%x\n", dev->hwdesc.dwClockUpdateRes);
+	dprintk(1, " .bCapabilities = 0x%x\n", dev->hwdesc.bCapabilities);
+	dprintk(1, " .dwDeviceRegistersLocation = 0x%x\n",
+		dev->hwdesc.dwDeviceRegistersLocation);
+
+	dprintk(1, " .dwHostMemoryRegion = 0x%x\n",
+		dev->hwdesc.dwHostMemoryRegion);
+
+	dprintk(1, " .dwHostMemoryRegionSize = 0x%x\n",
+		dev->hwdesc.dwHostMemoryRegionSize);
+
+	dprintk(1, " .dwHostHibernatMemRegion = 0x%x\n",
+		dev->hwdesc.dwHostHibernatMemRegion);
+
+	dprintk(1, " .dwHostHibernatMemRegionSize = 0x%x\n",
+		dev->hwdesc.dwHostHibernatMemRegionSize);
+}
+
+static void saa7164_dump_intfdesc(struct saa7164_dev *dev)
+{
+	dprintk(1, "@0x%p intfdesc "
+		"sizeof(tmComResInterfaceDescr_t) = %lu bytes\n",
+		&dev->intfdesc, sizeof(tmComResInterfaceDescr_t));
+
+	dprintk(1, " .bLength = 0x%x\n", dev->intfdesc.bLength);
+	dprintk(1, " .bDescriptorType = 0x%x\n", dev->intfdesc.bDescriptorType);
+	dprintk(1, " .bDescriptorSubtype = 0x%x\n",
+		dev->intfdesc.bDescriptorSubtype);
+
+	dprintk(1, " .bFlags = 0x%x\n", dev->intfdesc.bFlags);
+	dprintk(1, " .bInterfaceType = 0x%x\n", dev->intfdesc.bInterfaceType);
+	dprintk(1, " .bInterfaceId = 0x%x\n", dev->intfdesc.bInterfaceId);
+	dprintk(1, " .bBaseInterface = 0x%x\n", dev->intfdesc.bBaseInterface);
+	dprintk(1, " .bInterruptId = 0x%x\n", dev->intfdesc.bInterruptId);
+	dprintk(1, " .bDebugInterruptId = 0x%x\n",
+		dev->intfdesc.bDebugInterruptId);
+
+	dprintk(1, " .BARLocation = 0x%x\n", dev->intfdesc.BARLocation);
+}
+
+static void saa7164_dump_busdesc(struct saa7164_dev *dev)
+{
+	dprintk(1, "@0x%p busdesc sizeof(tmComResBusDescr_t) = %lu bytes\n",
+		&dev->busdesc, sizeof(tmComResBusDescr_t));
+
+	dprintk(1, " .CommandRing   = 0x%016Lx\n", dev->busdesc.CommandRing);
+	dprintk(1, " .ResponseRing  = 0x%016Lx\n", dev->busdesc.ResponseRing);
+	dprintk(1, " .CommandWrite  = 0x%x\n", dev->busdesc.CommandWrite);
+	dprintk(1, " .CommandRead   = 0x%x\n", dev->busdesc.CommandRead);
+	dprintk(1, " .ResponseWrite = 0x%x\n", dev->busdesc.ResponseWrite);
+	dprintk(1, " .ResponseRead  = 0x%x\n", dev->busdesc.ResponseRead);
+}
+
+/* Much of the hardware configuration and PCI registers are configured
+ * dynamically depending on firmware. We have to cache some initial
+ * structures then use these to locate other important structures
+ * from PCI space.
+ */
+static void saa7164_get_descriptors(struct saa7164_dev *dev)
+{
+	memcpy(&dev->hwdesc, dev->bmmio, sizeof(tmComResHWDescr_t));
+	memcpy(&dev->intfdesc, dev->bmmio + sizeof(tmComResHWDescr_t),
+		sizeof(tmComResInterfaceDescr_t));
+	memcpy(&dev->busdesc, dev->bmmio + dev->intfdesc.BARLocation,
+		sizeof(tmComResBusDescr_t));
+
+	if (dev->hwdesc.bLength != sizeof(tmComResHWDescr_t)) {
+		printk(KERN_ERR "Structure tmComResHWDescr_t is mangled\n");
+		printk(KERN_ERR "Need %x got %lu\n", dev->hwdesc.bLength,
+			sizeof(tmComResHWDescr_t));
+	} else
+		saa7164_dump_hwdesc(dev);
+
+	if (dev->intfdesc.bLength != sizeof(tmComResInterfaceDescr_t)) {
+		printk(KERN_ERR "struct tmComResInterfaceDescr_t is mangled\n");
+		printk(KERN_ERR "Need %x got %lu\n", dev->intfdesc.bLength,
+			sizeof(tmComResInterfaceDescr_t));
+	} else
+		saa7164_dump_intfdesc(dev);
+
+	saa7164_dump_busdesc(dev);
+}
+
+static int saa7164_pci_quirks(struct saa7164_dev *dev)
+{
+	return 0;
+}
+
+static int get_resources(struct saa7164_dev *dev)
+{
+	if (request_mem_region(pci_resource_start(dev->pci, 0),
+		pci_resource_len(dev->pci, 0), dev->name)) {
+
+		if (request_mem_region(pci_resource_start(dev->pci, 2),
+			pci_resource_len(dev->pci, 2), dev->name))
+			return 0;
+	}
+
+	printk(KERN_ERR "%s: can't get MMIO memory @ 0x%llx or 0x%llx\n",
+		dev->name,
+		(u64)pci_resource_start(dev->pci, 0),
+		(u64)pci_resource_start(dev->pci, 2));
+
+	return -EBUSY;
+}
+
+static int saa7164_dev_setup(struct saa7164_dev *dev)
+{
+	int i;
+
+	mutex_init(&dev->lock);
+	atomic_inc(&dev->refcount);
+	dev->nr = saa7164_devcount++;
+
+	sprintf(dev->name, "saa7164[%d]", dev->nr);
+
+	mutex_lock(&devlist);
+	list_add_tail(&dev->devlist, &saa7164_devlist);
+	mutex_unlock(&devlist);
+
+	/* board config */
+	dev->board = UNSET;
+	if (card[dev->nr] < saa7164_bcount)
+		dev->board = card[dev->nr];
+
+	for (i = 0; UNSET == dev->board  &&  i < saa7164_idcount; i++)
+		if (dev->pci->subsystem_vendor == saa7164_subids[i].subvendor &&
+			dev->pci->subsystem_device ==
+				saa7164_subids[i].subdevice)
+				dev->board = saa7164_subids[i].card;
+
+	if (UNSET == dev->board) {
+		dev->board = SAA7164_BOARD_UNKNOWN;
+		saa7164_card_list(dev);
+	}
+
+	dev->pci_bus  = dev->pci->bus->number;
+	dev->pci_slot = PCI_SLOT(dev->pci->devfn);
+
+	/* I2C Defaults / setup */
+	dev->i2c_bus[0].dev = dev;
+	dev->i2c_bus[0].nr = 0;
+	dev->i2c_bus[1].dev = dev;
+	dev->i2c_bus[1].nr = 1;
+	dev->i2c_bus[2].dev = dev;
+	dev->i2c_bus[2].nr = 2;
+
+	/* Transport port A Defaults / setup */
+	dev->ts1.dev = dev;
+	dev->ts1.nr = 0;
+	mutex_init(&dev->ts1.dvb.lock);
+	INIT_LIST_HEAD(&dev->ts1.dmaqueue.list);
+	INIT_LIST_HEAD(&dev->ts1.dummy_dmaqueue.list);
+	mutex_init(&dev->ts1.dmaqueue_lock);
+	mutex_init(&dev->ts1.dummy_dmaqueue_lock);
+
+	/* Transport port B Defaults / setup */
+	dev->ts2.dev = dev;
+	dev->ts2.nr = 1;
+	mutex_init(&dev->ts2.dvb.lock);
+	INIT_LIST_HEAD(&dev->ts2.dmaqueue.list);
+	INIT_LIST_HEAD(&dev->ts2.dummy_dmaqueue.list);
+	mutex_init(&dev->ts2.dmaqueue_lock);
+	mutex_init(&dev->ts2.dummy_dmaqueue_lock);
+
+	if (get_resources(dev) < 0) {
+		printk(KERN_ERR "CORE %s No more PCIe resources for "
+		       "subsystem: %04x:%04x\n",
+		       dev->name, dev->pci->subsystem_vendor,
+		       dev->pci->subsystem_device);
+
+		saa7164_devcount--;
+		return -ENODEV;
+	}
+
+	/* PCI/e allocations */
+	dev->lmmio = ioremap(pci_resource_start(dev->pci, 0),
+			     pci_resource_len(dev->pci, 0));
+
+	dev->lmmio2 = ioremap(pci_resource_start(dev->pci, 2),
+			     pci_resource_len(dev->pci, 2));
+
+	printk(KERN_INFO "CORE %s: dev->lmmio  = 0x%p\n", dev->name,
+		dev->lmmio);
+
+	printk(KERN_INFO "CORE %s: dev->lmmio2 = 0x%p\n", dev->name,
+		dev->lmmio2);
+
+	dev->bmmio = (u8 __iomem *)dev->lmmio;
+	dev->bmmio2 = (u8 __iomem *)dev->lmmio2;
+	printk(KERN_INFO "CORE %s: dev->bmmio  = 0x%p\n", dev->name,
+		dev->bmmio);
+
+	printk(KERN_INFO "CORE %s: dev->bmmio2 = 0x%p\n", dev->name,
+		dev->bmmio2);
+
+	/* TODO: Magic defines used in the windows driver, define these */
+	dev->InterruptStatus = (u32 *)(dev->bmmio + 0x183000 + 0xf80);
+	dev->InterruptAck = (u32 *)(dev->bmmio + 0x183000 + 0xf90);
+
+	printk(KERN_INFO
+		"CORE %s: subsystem: %04x:%04x, board: %s [card=%d,%s]\n",
+	       dev->name, dev->pci->subsystem_vendor,
+	       dev->pci->subsystem_device, saa7164_boards[dev->board].name,
+	       dev->board, card[dev->nr] == dev->board ?
+	       "insmod option" : "autodetected");
+
+	saa7164_pci_quirks(dev);
+
+	return 0;
+}
+
+static void saa7164_dev_unregister(struct saa7164_dev *dev)
+{
+	dprintk(1, "%s()\n", __func__);
+
+	release_mem_region(pci_resource_start(dev->pci, 0),
+		pci_resource_len(dev->pci, 0));
+
+	release_mem_region(pci_resource_start(dev->pci, 2),
+		pci_resource_len(dev->pci, 2));
+
+	if (!atomic_dec_and_test(&dev->refcount))
+		return;
+
+	iounmap(dev->lmmio);
+	iounmap(dev->lmmio2);
+
+	return;
+}
+
+static int __devinit saa7164_initdev(struct pci_dev *pci_dev,
+				     const struct pci_device_id *pci_id)
+{
+	struct saa7164_dev *dev;
+	int err, i;
+	u32 version;
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (NULL == dev)
+		return -ENOMEM;
+
+	/* pci init */
+	dev->pci = pci_dev;
+	if (pci_enable_device(pci_dev)) {
+		err = -EIO;
+		goto fail_free;
+	}
+
+	if (saa7164_dev_setup(dev) < 0) {
+		err = -EINVAL;
+		goto fail_free;
+	}
+
+	/* print pci info */
+	pci_read_config_byte(pci_dev, PCI_CLASS_REVISION, &dev->pci_rev);
+	pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER,  &dev->pci_lat);
+	printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, "
+	       "latency: %d, mmio: 0x%llx\n", dev->name,
+	       pci_name(pci_dev), dev->pci_rev, pci_dev->irq,
+	       dev->pci_lat,
+		(unsigned long long)pci_resource_start(pci_dev, 0));
+
+	pci_set_master(pci_dev);
+	/* TODO */
+	if (!pci_dma_supported(pci_dev, 0xffffffff)) {
+		printk("%s/0: Oops: no 32bit PCI DMA ???\n", dev->name);
+		err = -EIO;
+		goto fail_irq;
+	}
+
+	err = request_irq(pci_dev->irq, saa7164_irq,
+		IRQF_SHARED | IRQF_DISABLED, dev->name, dev);
+	if (err < 0) {
+		printk(KERN_ERR "%s: can't get IRQ %d\n", dev->name,
+			pci_dev->irq);
+		err = -EIO;
+		goto fail_irq;
+	}
+
+	pci_set_drvdata(pci_dev, dev);
+
+	saa7164_pci_quirks(dev);
+
+	/* Init the internal command list */
+	for (i = 0; i < SAA_CMD_MAX_MSG_UNITS; i++) {
+		dev->cmds[i].seqno = i;
+		dev->cmds[i].inuse = 0;
+		mutex_init(&dev->cmds[i].lock);
+		init_waitqueue_head(&dev->cmds[i].wait);
+	}
+
+	/* We need a deferred interrupt handler for cmd handling */
+	INIT_WORK(&dev->workcmd, saa7164_work_cmdhandler);
+
+	/* Only load the firmware if we know the board */
+	if (dev->board != SAA7164_BOARD_UNKNOWN) {
+
+		err = saa7164_downloadfirmware(dev);
+		if (err < 0) {
+			printk(KERN_ERR
+				"Failed to boot firmware, cannot continue\n");
+			goto fail_irq;
+		}
+
+		saa7164_get_descriptors(dev);
+		saa7164_dumpregs(dev, 0);
+		saa7164_getcurrentfirmwareversion(dev);
+		saa7164_getfirmwarestatus(dev);
+		err = saa7164_bus_setup(dev);
+		if (err < 0)
+			printk(KERN_ERR
+				"Failed to setup the bus, will continue\n");
+		saa7164_bus_dump(dev);
+
+		/* Ping the running firmware via the command bus and get the
+		 * firmware version, this checks the bus is running OK.
+		 */
+		version = 0;
+		if (saa7164_api_get_fw_version(dev, &version) == SAA_OK)
+			dprintk(1, "Bus is operating correctly using "
+				"version %d.%d.%d.%d (0x%x)\n",
+				(version & 0x0000fc00) >> 10,
+				(version & 0x000003e0) >> 5,
+				(version & 0x0000001f),
+				(version & 0xffff0000) >> 16,
+				version);
+		else
+			printk(KERN_ERR
+				"Failed to communicate with the firmware\n");
+
+		/* Bring up the I2C buses */
+		saa7164_i2c_register(&dev->i2c_bus[0]);
+		saa7164_i2c_register(&dev->i2c_bus[1]);
+		saa7164_i2c_register(&dev->i2c_bus[2]);
+		saa7164_gpio_setup(dev);
+		saa7164_card_setup(dev);
+
+
+		/* Parse the dynamic device configuration, find various
+		 * media endpoints (MPEG, WMV, PS, TS) and cache their
+		 * configuration details into the driver, so we can
+		 * reference them later during simething_register() func,
+		 * interrupt handlers, deferred work handlers etc.
+		 */
+		saa7164_api_enum_subdevs(dev);
+
+		/* Try a few API commands - just for exercise purposes */
+		saa7164_api_test(dev);
+
+		/* Begin to create the video sub-systems and register funcs */
+		if (saa7164_boards[dev->board].porta == SAA7164_MPEG_DVB) {
+			if (saa7164_dvb_register(&dev->ts1) < 0) {
+				printk(KERN_ERR "%s() Failed to register "
+					"dvb adapters on porta\n",
+					__func__);
+			}
+		}
+
+		if (saa7164_boards[dev->board].portb == SAA7164_MPEG_DVB) {
+			if (saa7164_dvb_register(&dev->ts2) < 0) {
+				printk(KERN_ERR"%s() Failed to register "
+					"dvb adapters on portb\n",
+					__func__);
+			}
+		}
+
+	} /* != BOARD_UNKNOWN */
+	else
+		printk(KERN_ERR "%s() Unsupported board detected, "
+			"registering without firmware\n", __func__);
+
+	return 0;
+
+fail_irq:
+	saa7164_dev_unregister(dev);
+fail_free:
+	kfree(dev);
+	return err;
+}
+
+static void saa7164_shutdown(struct saa7164_dev *dev)
+{
+	dprintk(1, "%s()\n", __func__);
+}
+
+static void __devexit saa7164_finidev(struct pci_dev *pci_dev)
+{
+	struct saa7164_dev *dev = pci_get_drvdata(pci_dev);
+
+	saa7164_shutdown(dev);
+
+	if (saa7164_boards[dev->board].porta == SAA7164_MPEG_DVB)
+		saa7164_dvb_unregister(&dev->ts1);
+
+	if (saa7164_boards[dev->board].portb == SAA7164_MPEG_DVB)
+		saa7164_dvb_unregister(&dev->ts2);
+
+	saa7164_i2c_unregister(&dev->i2c_bus[0]);
+	saa7164_i2c_unregister(&dev->i2c_bus[1]);
+	saa7164_i2c_unregister(&dev->i2c_bus[2]);
+
+	pci_disable_device(pci_dev);
+
+	/* unregister stuff */
+	free_irq(pci_dev->irq, dev);
+	pci_set_drvdata(pci_dev, NULL);
+
+	mutex_lock(&devlist);
+	list_del(&dev->devlist);
+	mutex_unlock(&devlist);
+
+	saa7164_dev_unregister(dev);
+	kfree(dev);
+}
+
+static struct pci_device_id saa7164_pci_tbl[] = {
+	{
+		/* SAA7164 */
+		.vendor       = 0x1131,
+		.device       = 0x7164,
+		.subvendor    = PCI_ANY_ID,
+		.subdevice    = PCI_ANY_ID,
+	}, {
+		/* --- end of list --- */
+	}
+};
+MODULE_DEVICE_TABLE(pci, saa7164_pci_tbl);
+
+static struct pci_driver saa7164_pci_driver = {
+	.name     = "saa7164",
+	.id_table = saa7164_pci_tbl,
+	.probe    = saa7164_initdev,
+	.remove   = __devexit_p(saa7164_finidev),
+	/* TODO */
+	.suspend  = NULL,
+	.resume   = NULL,
+};
+
+static int saa7164_init(void)
+{
+	printk(KERN_INFO "saa7164 driver loaded\n");
+	return pci_register_driver(&saa7164_pci_driver);
+}
+
+static void saa7164_fini(void)
+{
+	pci_unregister_driver(&saa7164_pci_driver);
+}
+
+module_init(saa7164_init);
+module_exit(saa7164_fini);
+
diff --git a/drivers/media/video/saa7164/saa7164-dvb.c b/drivers/media/video/saa7164/saa7164-dvb.c
new file mode 100644
index 00000000000..f21520f5979
--- /dev/null
+++ b/drivers/media/video/saa7164/saa7164-dvb.c
@@ -0,0 +1,578 @@
+/*
+ *  Driver for the NXP SAA7164 PCIe bridge
+ *
+ *  Copyright (c) 2009 Steven Toth <stoth@kernellabs.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "saa7164.h"
+
+#include "tda10048.h"
+#include "tda18271.h"
+#include "s5h1411.h"
+
+#define DRIVER_NAME "saa7164"
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+/* addr is in the card struct, get it from there */
+static struct tda10048_config hauppauge_hvr2200_1_config = {
+	.demod_address    = 0x10 >> 1,
+	.output_mode      = TDA10048_SERIAL_OUTPUT,
+	.fwbulkwritelen   = TDA10048_BULKWRITE_200,
+	.inversion        = TDA10048_INVERSION_ON
+};
+static struct tda10048_config hauppauge_hvr2200_2_config = {
+	.demod_address    = 0x12 >> 1,
+	.output_mode      = TDA10048_SERIAL_OUTPUT,
+	.fwbulkwritelen   = TDA10048_BULKWRITE_200,
+	.inversion        = TDA10048_INVERSION_ON
+};
+
+static struct tda18271_std_map hauppauge_tda18271_std_map = {
+	.atsc_6   = { .if_freq = 3250, .agc_mode = 3, .std = 3,
+		      .if_lvl = 6, .rfagc_top = 0x37 },
+	.qam_6    = { .if_freq = 4000, .agc_mode = 3, .std = 0,
+		      .if_lvl = 6, .rfagc_top = 0x37 },
+};
+
+static struct tda18271_config hauppauge_hvr22x0_tuner_config = {
+	.std_map	= &hauppauge_tda18271_std_map,
+	.gate		= TDA18271_GATE_ANALOG,
+};
+
+static struct s5h1411_config hauppauge_s5h1411_config = {
+	.output_mode   = S5H1411_SERIAL_OUTPUT,
+	.gpio          = S5H1411_GPIO_ON,
+	.qam_if        = S5H1411_IF_4000,
+	.vsb_if        = S5H1411_IF_3250,
+	.inversion     = S5H1411_INVERSION_ON,
+	.status_mode   = S5H1411_DEMODLOCKING,
+	.mpeg_timing   = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
+};
+
+static int saa7164_dvb_stop_tsport(struct saa7164_tsport *port)
+{
+	struct saa7164_dev *dev = port->dev;
+	int ret;
+
+	ret = saa7164_api_transition_port(port, SAA_DMASTATE_STOP);
+	if ((ret != SAA_OK) && (ret != SAA_ERR_ALREADY_STOPPED)) {
+		printk(KERN_ERR "%s() stop transition failed, ret = 0x%x\n",
+			__func__, ret);
+		ret = -EIO;
+	} else {
+		dprintk(DBGLVL_DVB, "%s()    Stopped\n", __func__);
+		ret = 0;
+	}
+
+	return ret;
+}
+
+static int saa7164_dvb_acquire_tsport(struct saa7164_tsport *port)
+{
+	struct saa7164_dev *dev = port->dev;
+	int ret;
+
+	ret = saa7164_api_transition_port(port, SAA_DMASTATE_ACQUIRE);
+	if ((ret != SAA_OK) && (ret != SAA_ERR_ALREADY_STOPPED)) {
+		printk(KERN_ERR "%s() acquire transition failed, ret = 0x%x\n",
+			__func__, ret);
+		ret = -EIO;
+	} else {
+		dprintk(DBGLVL_DVB, "%s() Acquired\n", __func__);
+		ret = 0;
+	}
+
+	return ret;
+}
+
+static int saa7164_dvb_pause_tsport(struct saa7164_tsport *port)
+{
+	struct saa7164_dev *dev = port->dev;
+	int ret;
+
+	ret = saa7164_api_transition_port(port, SAA_DMASTATE_PAUSE);
+	if ((ret != SAA_OK) && (ret != SAA_ERR_ALREADY_STOPPED)) {
+		printk(KERN_ERR "%s() pause transition failed, ret = 0x%x\n",
+			__func__, ret);
+		ret = -EIO;
+	} else {
+		dprintk(DBGLVL_DVB, "%s()   Paused\n", __func__);
+		ret = 0;
+	}
+
+	return ret;
+}
+
+/* Firmware is very windows centric, meaning you have to transition
+ * the part through AVStream / KS Windows stages, forwards or backwards.
+ * States are: stopped, acquired (h/w), paused, started.
+ */
+static int saa7164_dvb_stop_streaming(struct saa7164_tsport *port)
+{
+	struct saa7164_dev *dev = port->dev;
+	int ret;
+
+	dprintk(DBGLVL_DVB, "%s(port=%d)\n", __func__, port->nr);
+
+	ret = saa7164_dvb_pause_tsport(port);
+	ret = saa7164_dvb_acquire_tsport(port);
+	ret = saa7164_dvb_stop_tsport(port);
+
+	return ret;
+}
+
+static int saa7164_dvb_cfg_tsport(struct saa7164_tsport *port)
+{
+	tmHWStreamParameters_t *params = &port->hw_streamingparams;
+	struct saa7164_dev *dev = port->dev;
+	struct saa7164_buffer *buf;
+	struct list_head *c, *n;
+	int i = 0;
+
+	dprintk(DBGLVL_DVB, "%s(port=%d)\n", __func__, port->nr);
+
+	saa7164_writel(port->pitch, params->pitch);
+	saa7164_writel(port->bufsize, params->pitch * params->numberoflines);
+
+	dprintk(DBGLVL_DVB, " configured:\n");
+	dprintk(DBGLVL_DVB, "   lmmio       0x%llx\n", (u64)dev->lmmio);
+	dprintk(DBGLVL_DVB, "   bufcounter  0x%x = 0x%x\n", port->bufcounter,
+		saa7164_readl(port->bufcounter));
+
+	dprintk(DBGLVL_DVB, "   pitch       0x%x = %d\n", port->pitch,
+		saa7164_readl(port->pitch));
+
+	dprintk(DBGLVL_DVB, "   bufsize     0x%x = %d\n", port->bufsize,
+		saa7164_readl(port->bufsize));
+
+	dprintk(DBGLVL_DVB, "   buffercount = %d\n", port->hwcfg.buffercount);
+	dprintk(DBGLVL_DVB, "   bufoffset = 0x%x\n", port->bufoffset);
+	dprintk(DBGLVL_DVB, "   bufptr32h = 0x%x\n", port->bufptr32h);
+	dprintk(DBGLVL_DVB, "   bufptr32l = 0x%x\n", port->bufptr32l);
+
+	/* Poke the buffers and offsets into PCI space */
+	mutex_lock(&port->dmaqueue_lock);
+	list_for_each_safe(c, n, &port->dmaqueue.list) {
+		buf = list_entry(c, struct saa7164_buffer, list);
+
+		/* TODO: Review this in light of 32v64 assignments */
+		saa7164_writel(port->bufoffset + (sizeof(u32) * i), 0);
+		saa7164_writel(port->bufptr32h + ((sizeof(u32) * 2) * i),
+			buf->pt_dma);
+		saa7164_writel(port->bufptr32l + ((sizeof(u32) * 2) * i), 0);
+
+		dprintk(DBGLVL_DVB,
+			"   buf[%d] offset 0x%lx (0x%x) "
+			"buf 0x%lx/%lx (0x%x/%x)\n",
+			i,
+			port->bufoffset + (i * sizeof(u32)),
+			saa7164_readl(port->bufoffset + (sizeof(u32) * i)),
+			port->bufptr32h + ((sizeof(u32) * 2) * i),
+			port->bufptr32l + ((sizeof(u32) * 2) * i),
+			saa7164_readl(port->bufptr32h + ((sizeof(u32) * i)
+				* 2)),
+			saa7164_readl(port->bufptr32l + ((sizeof(u32) * i)
+				* 2)));
+
+		if (i++ > port->hwcfg.buffercount)
+			BUG();
+
+	}
+	mutex_unlock(&port->dmaqueue_lock);
+
+	return 0;
+}
+
+static int saa7164_dvb_start_tsport(struct saa7164_tsport *port)
+{
+	struct saa7164_dev *dev = port->dev;
+	int ret = 0, result;
+
+	dprintk(DBGLVL_DVB, "%s(port=%d)\n", __func__, port->nr);
+
+	saa7164_dvb_cfg_tsport(port);
+
+	/* Acquire the hardware */
+	result = saa7164_api_transition_port(port, SAA_DMASTATE_ACQUIRE);
+	if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) {
+		printk(KERN_ERR "%s() acquire transition failed, res = 0x%x\n",
+			__func__, result);
+
+		/* Stop the hardware, regardless */
+		result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP);
+		if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) {
+			printk(KERN_ERR "%s() acquire/forced stop transition "
+				"failed, res = 0x%x\n", __func__, result);
+		}
+		ret = -EIO;
+		goto out;
+	} else
+		dprintk(DBGLVL_DVB, "%s()   Acquired\n", __func__);
+
+	/* Pause the hardware */
+	result = saa7164_api_transition_port(port, SAA_DMASTATE_PAUSE);
+	if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) {
+		printk(KERN_ERR "%s() pause transition failed, res = 0x%x\n",
+				__func__, result);
+
+		/* Stop the hardware, regardless */
+		result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP);
+		if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) {
+			printk(KERN_ERR "%s() pause/forced stop transition "
+				"failed, res = 0x%x\n", __func__, result);
+		}
+
+		ret = -EIO;
+		goto out;
+	} else
+		dprintk(DBGLVL_DVB, "%s()   Paused\n", __func__);
+
+	/* Start the hardware */
+	result = saa7164_api_transition_port(port, SAA_DMASTATE_RUN);
+	if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) {
+		printk(KERN_ERR "%s() run transition failed, result = 0x%x\n",
+				__func__, result);
+
+		/* Stop the hardware, regardless */
+		result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP);
+		if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) {
+			printk(KERN_ERR "%s() run/forced stop transition "
+				"failed, res = 0x%x\n", __func__, result);
+		}
+
+		ret = -EIO;
+	} else
+		dprintk(DBGLVL_DVB, "%s()   Running\n", __func__);
+
+out:
+	return ret;
+}
+
+static int saa7164_dvb_start_feed(struct dvb_demux_feed *feed)
+{
+	struct dvb_demux *demux = feed->demux;
+	struct saa7164_tsport *port = (struct saa7164_tsport *) demux->priv;
+	struct saa7164_dvb *dvb = &port->dvb;
+	struct saa7164_dev *dev = port->dev;
+	int ret = 0;
+
+	dprintk(DBGLVL_DVB, "%s(port=%d)\n", __func__, port->nr);
+
+	if (!demux->dmx.frontend)
+		return -EINVAL;
+
+	if (dvb) {
+		mutex_lock(&dvb->lock);
+		if (dvb->feeding++ == 0) {
+			/* Start transport */
+			ret = saa7164_dvb_start_tsport(port);
+		}
+		mutex_unlock(&dvb->lock);
+		dprintk(DBGLVL_DVB, "%s(port=%d) now feeding = %d\n",
+			__func__, port->nr, dvb->feeding);
+	}
+
+	return ret;
+}
+
+static int saa7164_dvb_stop_feed(struct dvb_demux_feed *feed)
+{
+	struct dvb_demux *demux = feed->demux;
+	struct saa7164_tsport *port = (struct saa7164_tsport *) demux->priv;
+	struct saa7164_dvb *dvb = &port->dvb;
+	struct saa7164_dev *dev = port->dev;
+	int ret = 0;
+
+	dprintk(DBGLVL_DVB, "%s(port=%d)\n", __func__, port->nr);
+
+	if (dvb) {
+		mutex_lock(&dvb->lock);
+		if (--dvb->feeding == 0) {
+			/* Stop transport */
+			ret = saa7164_dvb_stop_streaming(port);
+		}
+		mutex_unlock(&dvb->lock);
+		dprintk(DBGLVL_DVB, "%s(port=%d) now feeding = %d\n",
+			__func__, port->nr, dvb->feeding);
+	}
+
+	return ret;
+}
+
+static int dvb_register(struct saa7164_tsport *port)
+{
+	struct saa7164_dvb *dvb = &port->dvb;
+	struct saa7164_dev *dev = port->dev;
+	struct saa7164_buffer *buf;
+	int result, i;
+
+	dprintk(DBGLVL_DVB, "%s(port=%d)\n", __func__, port->nr);
+
+	/* Sanity check that the PCI configuration space is active */
+	if (port->hwcfg.BARLocation == 0) {
+		result = -ENOMEM;
+		printk(KERN_ERR "%s: dvb_register_adapter failed "
+		       "(errno = %d), NO PCI configuration\n",
+			DRIVER_NAME, result);
+		goto fail_adapter;
+	}
+
+	/* Init and establish defaults */
+	port->hw_streamingparams.bitspersample = 8;
+	port->hw_streamingparams.samplesperline = 188;
+	port->hw_streamingparams.numberoflines =
+		(SAA7164_TS_NUMBER_OF_LINES * 188) / 188;
+
+	port->hw_streamingparams.pitch = 188;
+	port->hw_streamingparams.linethreshold = 0;
+	port->hw_streamingparams.pagetablelistvirt = 0;
+	port->hw_streamingparams.pagetablelistphys = 0;
+	port->hw_streamingparams.numpagetables = 2 +
+		((SAA7164_TS_NUMBER_OF_LINES * 188) / PAGE_SIZE);
+
+	port->hw_streamingparams.numpagetableentries = port->hwcfg.buffercount;
+
+	/* Allocate the PCI resources */
+	for (i = 0; i < port->hwcfg.buffercount; i++) {
+		buf = saa7164_buffer_alloc(port,
+			port->hw_streamingparams.numberoflines *
+			port->hw_streamingparams.pitch);
+
+		if (!buf) {
+			result = -ENOMEM;
+			printk(KERN_ERR "%s: dvb_register_adapter failed "
+			       "(errno = %d), unable to allocate buffers\n",
+				DRIVER_NAME, result);
+			goto fail_adapter;
+		}
+		buf->nr = i;
+
+		mutex_lock(&port->dmaqueue_lock);
+		list_add_tail(&buf->list, &port->dmaqueue.list);
+		mutex_unlock(&port->dmaqueue_lock);
+	}
+
+	/* register adapter */
+	result = dvb_register_adapter(&dvb->adapter, DRIVER_NAME, THIS_MODULE,
+			&dev->pci->dev, adapter_nr);
+	if (result < 0) {
+		printk(KERN_ERR "%s: dvb_register_adapter failed "
+		       "(errno = %d)\n", DRIVER_NAME, result);
+		goto fail_adapter;
+	}
+	dvb->adapter.priv = port;
+
+	/* register frontend */
+	result = dvb_register_frontend(&dvb->adapter, dvb->frontend);
+	if (result < 0) {
+		printk(KERN_ERR "%s: dvb_register_frontend failed "
+		       "(errno = %d)\n", DRIVER_NAME, result);
+		goto fail_frontend;
+	}
+
+	/* register demux stuff */
+	dvb->demux.dmx.capabilities =
+		DMX_TS_FILTERING | DMX_SECTION_FILTERING |
+		DMX_MEMORY_BASED_FILTERING;
+	dvb->demux.priv       = port;
+	dvb->demux.filternum  = 256;
+	dvb->demux.feednum    = 256;
+	dvb->demux.start_feed = saa7164_dvb_start_feed;
+	dvb->demux.stop_feed  = saa7164_dvb_stop_feed;
+	result = dvb_dmx_init(&dvb->demux);
+	if (result < 0) {
+		printk(KERN_ERR "%s: dvb_dmx_init failed (errno = %d)\n",
+		       DRIVER_NAME, result);
+		goto fail_dmx;
+	}
+
+	dvb->dmxdev.filternum    = 256;
+	dvb->dmxdev.demux        = &dvb->demux.dmx;
+	dvb->dmxdev.capabilities = 0;
+	result = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter);
+	if (result < 0) {
+		printk(KERN_ERR "%s: dvb_dmxdev_init failed (errno = %d)\n",
+		       DRIVER_NAME, result);
+		goto fail_dmxdev;
+	}
+
+	dvb->fe_hw.source = DMX_FRONTEND_0;
+	result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_hw);
+	if (result < 0) {
+		printk(KERN_ERR "%s: add_frontend failed "
+		       "(DMX_FRONTEND_0, errno = %d)\n", DRIVER_NAME, result);
+		goto fail_fe_hw;
+	}
+
+	dvb->fe_mem.source = DMX_MEMORY_FE;
+	result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_mem);
+	if (result < 0) {
+		printk(KERN_ERR "%s: add_frontend failed "
+		       "(DMX_MEMORY_FE, errno = %d)\n", DRIVER_NAME, result);
+		goto fail_fe_mem;
+	}
+
+	result = dvb->demux.dmx.connect_frontend(&dvb->demux.dmx, &dvb->fe_hw);
+	if (result < 0) {
+		printk(KERN_ERR "%s: connect_frontend failed (errno = %d)\n",
+		       DRIVER_NAME, result);
+		goto fail_fe_conn;
+	}
+
+	/* register network adapter */
+	dvb_net_init(&dvb->adapter, &dvb->net, &dvb->demux.dmx);
+	return 0;
+
+fail_fe_conn:
+	dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem);
+fail_fe_mem:
+	dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw);
+fail_fe_hw:
+	dvb_dmxdev_release(&dvb->dmxdev);
+fail_dmxdev:
+	dvb_dmx_release(&dvb->demux);
+fail_dmx:
+	dvb_unregister_frontend(dvb->frontend);
+fail_frontend:
+	dvb_frontend_detach(dvb->frontend);
+	dvb_unregister_adapter(&dvb->adapter);
+fail_adapter:
+	return result;
+}
+
+int saa7164_dvb_unregister(struct saa7164_tsport *port)
+{
+	struct saa7164_dvb *dvb = &port->dvb;
+	struct saa7164_dev *dev = port->dev;
+	struct saa7164_buffer *b;
+	struct list_head *c, *n;
+
+	dprintk(DBGLVL_DVB, "%s()\n", __func__);
+
+	/* Remove any allocated buffers */
+	mutex_lock(&port->dmaqueue_lock);
+	list_for_each_safe(c, n, &port->dmaqueue.list) {
+		b = list_entry(c, struct saa7164_buffer, list);
+		list_del(c);
+		saa7164_buffer_dealloc(port, b);
+	}
+	mutex_unlock(&port->dmaqueue_lock);
+
+	if (dvb->frontend == NULL)
+		return 0;
+
+	dvb_net_release(&dvb->net);
+	dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem);
+	dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw);
+	dvb_dmxdev_release(&dvb->dmxdev);
+	dvb_dmx_release(&dvb->demux);
+	dvb_unregister_frontend(dvb->frontend);
+	dvb_frontend_detach(dvb->frontend);
+	dvb_unregister_adapter(&dvb->adapter);
+	return 0;
+}
+
+/* All the DVB attach calls go here, this function get's modified
+ * for each new card.
+ */
+int saa7164_dvb_register(struct saa7164_tsport *port)
+{
+	struct saa7164_dev *dev = port->dev;
+	struct saa7164_dvb *dvb = &port->dvb;
+	struct saa7164_i2c *i2c_bus = NULL;
+	int ret;
+
+	dprintk(DBGLVL_DVB, "%s()\n", __func__);
+
+	/* init frontend */
+	switch (dev->board) {
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
+		switch (port->nr) {
+		case 0:
+			i2c_bus = &dev->i2c_bus[1];
+
+			port->dvb.frontend = dvb_attach(tda10048_attach,
+				&hauppauge_hvr2200_1_config,
+				&i2c_bus->i2c_adap);
+
+			if (port->dvb.frontend != NULL) {
+				dvb_attach(tda18271_attach, port->dvb.frontend,
+					0xc0 >> 1, &i2c_bus->i2c_adap,
+					&hauppauge_hvr22x0_tuner_config);
+			}
+
+			break;
+		case 1:
+			i2c_bus = &dev->i2c_bus[2];
+
+			port->dvb.frontend = dvb_attach(tda10048_attach,
+				&hauppauge_hvr2200_2_config,
+				&i2c_bus->i2c_adap);
+
+			if (port->dvb.frontend != NULL) {
+				dvb_attach(tda18271_attach, port->dvb.frontend,
+					0xc0 >> 1, &i2c_bus->i2c_adap,
+					&hauppauge_hvr22x0_tuner_config);
+			}
+
+			break;
+		}
+		break;
+	case SAA7164_BOARD_HAUPPAUGE_HVR2250:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
+		i2c_bus = &dev->i2c_bus[port->nr + 1];
+
+		port->dvb.frontend = dvb_attach(s5h1411_attach,
+			&hauppauge_s5h1411_config,
+			&i2c_bus->i2c_adap);
+
+		if (port->dvb.frontend != NULL) {
+			/* TODO: addr is in the card struct */
+			dvb_attach(tda18271_attach, port->dvb.frontend,
+				0xc0 >> 1, &i2c_bus->i2c_adap,
+				&hauppauge_hvr22x0_tuner_config);
+		}
+
+		break;
+	default:
+		printk(KERN_ERR "%s: The frontend isn't supported\n",
+		       dev->name);
+		break;
+	}
+	if (NULL == dvb->frontend) {
+		printk(KERN_ERR "%s() Frontend initialization failed\n",
+		       __func__);
+		return -1;
+	}
+
+	/* Put the analog decoder in standby to keep it quiet */
+
+	/* register everything */
+	ret = dvb_register(port);
+	if (ret < 0) {
+		if (dvb->frontend->ops.release)
+			dvb->frontend->ops.release(dvb->frontend);
+		return ret;
+	}
+
+	return 0;
+}
+
diff --git a/drivers/media/video/saa7164/saa7164-fw.c b/drivers/media/video/saa7164/saa7164-fw.c
new file mode 100644
index 00000000000..6595dd67c5c
--- /dev/null
+++ b/drivers/media/video/saa7164/saa7164-fw.c
@@ -0,0 +1,615 @@
+/*
+ *  Driver for the NXP SAA7164 PCIe bridge
+ *
+ *  Copyright (c) 2009 Steven Toth <stoth@kernellabs.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/firmware.h>
+
+#include "saa7164.h"
+
+#define SAA7164_REV2_FIRMWARE		"v4l-saa7164-1.0.2.fw"
+#define SAA7164_REV2_FIRMWARE_SIZE	3978608
+
+#define SAA7164_REV3_FIRMWARE		"v4l-saa7164-1.0.3.fw"
+#define SAA7164_REV3_FIRMWARE_SIZE	3978608
+
+struct fw_header {
+	u32	firmwaresize;
+	u32	bslsize;
+	u32	reserved;
+	u32	version;
+};
+
+int saa7164_dl_wait_ack(struct saa7164_dev *dev, u32 reg)
+{
+	u32 timeout = SAA_DEVICE_TIMEOUT;
+	while ((saa7164_readl(reg) & 0x01) == 0) {
+		timeout -= 5;
+		if (timeout == 0) {
+			printk(KERN_ERR "%s() timeout (no d/l ack)\n",
+				__func__);
+			return -EBUSY;
+		}
+		/* TODO: Review this for efficiency, f/w load is slow */
+		msleep(1);
+	}
+
+	return 0;
+}
+
+int saa7164_dl_wait_clr(struct saa7164_dev *dev, u32 reg)
+{
+	u32 timeout = SAA_DEVICE_TIMEOUT;
+	while (saa7164_readl(reg) & 0x01) {
+		timeout -= 5;
+		if (timeout == 0) {
+			printk(KERN_ERR "%s() timeout (no d/l clr)\n",
+				__func__);
+			return -EBUSY;
+		}
+		/* TODO: Review this for efficiency, f/w load is slow */
+		msleep(1);
+	}
+
+	return 0;
+}
+
+/* TODO: move dlflags into dev-> and change to write/readl/b */
+/* TODO: Excessive levels of debug */
+int saa7164_downloadimage(struct saa7164_dev *dev, u8 *src, u32 srcsize,
+	u32 dlflags, u8 *dst, u32 dstsize)
+{
+	u32 reg, timeout, offset;
+	u8 *srcbuf = NULL;
+	int ret;
+
+	u32 dlflag = dlflags;
+	u32 dlflag_ack = dlflag + 4;
+	u32 drflag = dlflag_ack + 4;
+	u32 drflag_ack = drflag + 4;
+	u32 bleflag = drflag_ack + 4;
+
+	dprintk(DBGLVL_FW,
+		"%s(image=%p, size=%d, flags=0x%x, dst=%p, dstsize=0x%x)\n",
+		__func__, src, srcsize, dlflags, dst, dstsize);
+
+	if ((src == 0) || (dst == 0)) {
+		ret = -EIO;
+		goto out;
+	}
+
+	srcbuf = kzalloc(4 * 1048576, GFP_KERNEL);
+	if (NULL == srcbuf) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	if (srcsize > (4*1048576)) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	memcpy(srcbuf, src, srcsize);
+
+	dprintk(DBGLVL_FW, "%s() dlflag = 0x%x\n", __func__, dlflag);
+	dprintk(DBGLVL_FW, "%s() dlflag_ack = 0x%x\n", __func__, dlflag_ack);
+	dprintk(DBGLVL_FW, "%s() drflag = 0x%x\n", __func__, drflag);
+	dprintk(DBGLVL_FW, "%s() drflag_ack = 0x%x\n", __func__, drflag_ack);
+	dprintk(DBGLVL_FW, "%s() bleflag = 0x%x\n", __func__, bleflag);
+
+	reg = saa7164_readl(dlflag);
+	dprintk(DBGLVL_FW, "%s() dlflag (0x%x)= 0x%x\n", __func__, dlflag, reg);
+	if (reg == 1)
+		dprintk(DBGLVL_FW,
+			"%s() Download flag already set, please reboot\n",
+			__func__);
+
+	/* Indicate download start */
+	saa7164_writel(dlflag, 1);
+	ret = saa7164_dl_wait_ack(dev, dlflag_ack);
+	if (ret < 0)
+		goto out;
+
+	/* Ack download start, then wait for wait */
+	saa7164_writel(dlflag, 0);
+	ret = saa7164_dl_wait_clr(dev, dlflag_ack);
+	if (ret < 0)
+		goto out;
+
+	/* Deal with the raw firmware, in the appropriate chunk size */
+	for (offset = 0; srcsize > dstsize;
+		srcsize -= dstsize, offset += dstsize) {
+
+		dprintk(DBGLVL_FW, "%s() memcpy %d\n", __func__, dstsize);
+		memcpy(dst, srcbuf + offset, dstsize);
+
+		/* Flag the data as ready */
+		saa7164_writel(drflag, 1);
+		ret = saa7164_dl_wait_ack(dev, drflag_ack);
+		if (ret < 0)
+			goto out;
+
+		/* Wait for indication data was received */
+		saa7164_writel(drflag, 0);
+		ret = saa7164_dl_wait_clr(dev, drflag_ack);
+		if (ret < 0)
+			goto out;
+
+	}
+
+	dprintk(DBGLVL_FW, "%s() memcpy(l) %d\n", __func__, dstsize);
+	/* Write last block to the device */
+	memcpy(dst, srcbuf+offset, srcsize);
+
+	/* Flag the data as ready */
+	saa7164_writel(drflag, 1);
+	ret = saa7164_dl_wait_ack(dev, drflag_ack);
+	if (ret < 0)
+		goto out;
+
+	saa7164_writel(drflag, 0);
+	timeout = 0;
+	while (saa7164_readl(bleflag) != SAA_DEVICE_IMAGE_BOOTING) {
+		if (saa7164_readl(bleflag) & SAA_DEVICE_IMAGE_CORRUPT) {
+			printk(KERN_ERR "%s() image corrupt\n", __func__);
+			ret = -EBUSY;
+			goto out;
+		}
+
+		if (saa7164_readl(bleflag) & SAA_DEVICE_MEMORY_CORRUPT) {
+			printk(KERN_ERR "%s() device memory corrupt\n",
+				__func__);
+			ret = -EBUSY;
+			goto out;
+		}
+
+		msleep(10);
+		if (timeout++ > 60)
+			break;
+	}
+
+	printk(KERN_INFO "%s() Image downloaded, booting...\n", __func__);
+
+	ret = saa7164_dl_wait_clr(dev, drflag_ack);
+	if (ret < 0)
+		goto out;
+
+	printk(KERN_INFO "%s() Image booted successfully.\n", __func__);
+	ret = 0;
+
+out:
+	kfree(srcbuf);
+	return ret;
+}
+
+/* TODO: Excessive debug */
+/* Load the firmware. Optionally it can be in ROM or newer versions
+ * can be on disk, saving the expense of the ROM hardware. */
+int saa7164_downloadfirmware(struct saa7164_dev *dev)
+{
+	/* u32 second_timeout = 60 * SAA_DEVICE_TIMEOUT; */
+	u32 tmp, filesize, version, err_flags, first_timeout, fwlength;
+	u32 second_timeout, updatebootloader = 1, bootloadersize = 0;
+	const struct firmware *fw = NULL;
+	struct fw_header *hdr, *boothdr = NULL, *fwhdr;
+	u32 bootloaderversion = 0, fwloadersize;
+	u8 *bootloaderoffset = NULL, *fwloaderoffset;
+	char *fwname;
+	int ret;
+
+	dprintk(DBGLVL_FW, "%s()\n", __func__);
+
+	if (saa7164_boards[dev->board].chiprev == SAA7164_CHIP_REV2) {
+		fwname = SAA7164_REV2_FIRMWARE;
+		fwlength = SAA7164_REV2_FIRMWARE_SIZE;
+	} else {
+		fwname = SAA7164_REV3_FIRMWARE;
+		fwlength = SAA7164_REV3_FIRMWARE_SIZE;
+	}
+
+	version = saa7164_getcurrentfirmwareversion(dev);
+
+	if (version == 0x00) {
+
+		second_timeout = 100;
+		first_timeout = 100;
+		err_flags = saa7164_readl(SAA_BOOTLOADERERROR_FLAGS);
+		dprintk(DBGLVL_FW, "%s() err_flags = %x\n",
+			__func__, err_flags);
+
+		while (err_flags != SAA_DEVICE_IMAGE_BOOTING) {
+			dprintk(DBGLVL_FW, "%s() err_flags = %x\n",
+				__func__, err_flags);
+			msleep(10);
+
+			if (err_flags & SAA_DEVICE_IMAGE_CORRUPT) {
+				printk(KERN_ERR "%s() firmware corrupt\n",
+					__func__);
+				break;
+			}
+			if (err_flags & SAA_DEVICE_MEMORY_CORRUPT) {
+				printk(KERN_ERR "%s() device memory corrupt\n",
+					__func__);
+				break;
+			}
+			if (err_flags & SAA_DEVICE_NO_IMAGE) {
+				printk(KERN_ERR "%s() no first image\n",
+				__func__);
+				break;
+			}
+			if (err_flags & SAA_DEVICE_IMAGE_SEARCHING) {
+				first_timeout -= 10;
+				if (first_timeout == 0) {
+					printk(KERN_ERR
+						"%s() no first image\n",
+						__func__);
+					break;
+				}
+			} else if (err_flags & SAA_DEVICE_IMAGE_LOADING) {
+				second_timeout -= 10;
+				if (second_timeout == 0) {
+					printk(KERN_ERR
+					"%s() FW load time exceeded\n",
+						__func__);
+					break;
+				}
+			} else {
+				second_timeout -= 10;
+				if (second_timeout == 0) {
+					printk(KERN_ERR
+					"%s() Unknown bootloader flags 0x%x\n",
+						__func__, err_flags);
+					break;
+				}
+			}
+
+			err_flags = saa7164_readl(SAA_BOOTLOADERERROR_FLAGS);
+		} /* While != Booting */
+
+		if (err_flags == SAA_DEVICE_IMAGE_BOOTING) {
+			dprintk(DBGLVL_FW, "%s() Loader 1 has loaded.\n",
+				__func__);
+			first_timeout = SAA_DEVICE_TIMEOUT;
+			second_timeout = 60 * SAA_DEVICE_TIMEOUT;
+			second_timeout = 100;
+
+			err_flags = saa7164_readl(SAA_SECONDSTAGEERROR_FLAGS);
+			dprintk(DBGLVL_FW, "%s() err_flags2 = %x\n",
+				__func__, err_flags);
+			while (err_flags != SAA_DEVICE_IMAGE_BOOTING) {
+				dprintk(DBGLVL_FW, "%s() err_flags2 = %x\n",
+					__func__, err_flags);
+				msleep(10);
+
+				if (err_flags & SAA_DEVICE_IMAGE_CORRUPT) {
+					printk(KERN_ERR
+						"%s() firmware corrupt\n",
+						__func__);
+					break;
+				}
+				if (err_flags & SAA_DEVICE_MEMORY_CORRUPT) {
+					printk(KERN_ERR
+						"%s() device memory corrupt\n",
+						__func__);
+					break;
+				}
+				if (err_flags & SAA_DEVICE_NO_IMAGE) {
+					printk(KERN_ERR "%s() no first image\n",
+						__func__);
+					break;
+				}
+				if (err_flags & SAA_DEVICE_IMAGE_SEARCHING) {
+					first_timeout -= 10;
+					if (first_timeout == 0) {
+						printk(KERN_ERR
+						"%s() no second image\n",
+							__func__);
+						break;
+					}
+				} else if (err_flags &
+					SAA_DEVICE_IMAGE_LOADING) {
+					second_timeout -= 10;
+					if (second_timeout == 0) {
+						printk(KERN_ERR
+						"%s() FW load time exceeded\n",
+							__func__);
+						break;
+					}
+				} else {
+					second_timeout -= 10;
+					if (second_timeout == 0) {
+						printk(KERN_ERR
+					"%s() Unknown bootloader flags 0x%x\n",
+							__func__, err_flags);
+						break;
+					}
+				}
+
+				err_flags =
+				saa7164_readl(SAA_SECONDSTAGEERROR_FLAGS);
+			} /* err_flags != SAA_DEVICE_IMAGE_BOOTING */
+
+			dprintk(DBGLVL_FW, "%s() Loader flags 1:0x%x 2:0x%x.\n",
+				__func__,
+				saa7164_readl(SAA_BOOTLOADERERROR_FLAGS),
+				saa7164_readl(SAA_SECONDSTAGEERROR_FLAGS));
+
+		} /* err_flags == SAA_DEVICE_IMAGE_BOOTING */
+
+		/* It's possible for both firmwares to have booted,
+		 * but that doesn't mean they've finished booting yet.
+		 */
+		if ((saa7164_readl(SAA_BOOTLOADERERROR_FLAGS) ==
+			SAA_DEVICE_IMAGE_BOOTING) &&
+			(saa7164_readl(SAA_SECONDSTAGEERROR_FLAGS) ==
+			SAA_DEVICE_IMAGE_BOOTING)) {
+
+
+			dprintk(DBGLVL_FW, "%s() Loader 2 has loaded.\n",
+				__func__);
+
+			first_timeout = SAA_DEVICE_TIMEOUT;
+			while (first_timeout) {
+				msleep(10);
+
+				version =
+					saa7164_getcurrentfirmwareversion(dev);
+				if (version) {
+					dprintk(DBGLVL_FW,
+					"%s() All f/w loaded successfully\n",
+						__func__);
+					break;
+				} else {
+					first_timeout -= 10;
+					if (first_timeout == 0) {
+						printk(KERN_ERR
+						"%s() FW did not boot\n",
+							__func__);
+						break;
+					}
+				}
+			}
+		}
+		version = saa7164_getcurrentfirmwareversion(dev);
+	} /* version == 0 */
+
+	/* Has the firmware really booted? */
+	if ((saa7164_readl(SAA_BOOTLOADERERROR_FLAGS) ==
+		SAA_DEVICE_IMAGE_BOOTING) &&
+		(saa7164_readl(SAA_SECONDSTAGEERROR_FLAGS) ==
+		SAA_DEVICE_IMAGE_BOOTING) && (version == 0)) {
+
+		printk(KERN_ERR
+			"%s() The firmware hung, probably bad firmware\n",
+			__func__);
+
+		/* Tell the second stage loader we have a deadlock */
+		saa7164_writel(SAA_DEVICE_DEADLOCK_DETECTED_OFFSET,
+			SAA_DEVICE_DEADLOCK_DETECTED);
+
+		saa7164_getfirmwarestatus(dev);
+
+		return -ENOMEM;
+	}
+
+	dprintk(DBGLVL_FW, "Device has Firmware Version %d.%d.%d.%d\n",
+		(version & 0x0000fc00) >> 10,
+		(version & 0x000003e0) >> 5,
+		(version & 0x0000001f),
+		(version & 0xffff0000) >> 16);
+
+	/* Load the firmwware from the disk if required */
+	if (version == 0) {
+
+		printk(KERN_INFO "%s() Waiting for firmware upload (%s)\n",
+			__func__, fwname);
+
+		ret = request_firmware(&fw, fwname, &dev->pci->dev);
+		if (ret) {
+			printk(KERN_ERR "%s() Upload failed. "
+				"(file not found?)\n", __func__);
+			return -ENOMEM;
+		}
+
+		printk(KERN_INFO "%s() firmware read %Zu bytes.\n",
+			__func__, fw->size);
+
+		if (fw->size != fwlength) {
+			printk(KERN_ERR "xc5000: firmware incorrect size\n");
+			ret = -ENOMEM;
+			goto out;
+		}
+
+		printk(KERN_INFO "%s() firmware loaded.\n", __func__);
+
+		hdr = (struct fw_header *)fw->data;
+		printk(KERN_INFO "Firmware file header part 1:\n");
+		printk(KERN_INFO " .FirmwareSize = 0x%x\n", hdr->firmwaresize);
+		printk(KERN_INFO " .BSLSize = 0x%x\n", hdr->bslsize);
+		printk(KERN_INFO " .Reserved = 0x%x\n", hdr->reserved);
+		printk(KERN_INFO " .Version = 0x%x\n", hdr->version);
+
+		/* Retreive bootloader if reqd */
+		if ((hdr->firmwaresize == 0) && (hdr->bslsize == 0))
+			/* Second bootloader in the firmware file */
+			filesize = hdr->reserved * 16;
+		else
+			filesize = (hdr->firmwaresize + hdr->bslsize) *
+				16 + sizeof(struct fw_header);
+
+		printk(KERN_INFO "%s() SecBootLoader.FileSize = %d\n",
+			__func__, filesize);
+
+		/* Get bootloader (if reqd) and firmware header */
+		if ((hdr->firmwaresize == 0) && (hdr->bslsize == 0)) {
+			/* Second boot loader is required */
+
+			/* Get the loader header */
+			boothdr = (struct fw_header *)(fw->data +
+				sizeof(struct fw_header));
+
+			bootloaderversion =
+				saa7164_readl(SAA_DEVICE_2ND_VERSION);
+			dprintk(DBGLVL_FW, "Onboard BootLoader:\n");
+			dprintk(DBGLVL_FW, "->Flag 0x%x\n",
+				saa7164_readl(SAA_BOOTLOADERERROR_FLAGS));
+			dprintk(DBGLVL_FW, "->Ack 0x%x\n",
+				saa7164_readl(SAA_DATAREADY_FLAG_ACK));
+			dprintk(DBGLVL_FW, "->FW Version 0x%x\n", version);
+			dprintk(DBGLVL_FW, "->Loader Version 0x%x\n",
+				bootloaderversion);
+
+			if ((saa7164_readl(SAA_BOOTLOADERERROR_FLAGS) ==
+				0x03) && (saa7164_readl(SAA_DATAREADY_FLAG_ACK)
+				== 0x00) && (version == 0x00)) {
+
+				dprintk(DBGLVL_FW, "BootLoader version in  "
+					"rom %d.%d.%d.%d\n",
+					(bootloaderversion & 0x0000fc00) >> 10,
+					(bootloaderversion & 0x000003e0) >> 5,
+					(bootloaderversion & 0x0000001f),
+					(bootloaderversion & 0xffff0000) >> 16
+					);
+				dprintk(DBGLVL_FW, "BootLoader version "
+					"in file %d.%d.%d.%d\n",
+					(boothdr->version & 0x0000fc00) >> 10,
+					(boothdr->version & 0x000003e0) >> 5,
+					(boothdr->version & 0x0000001f),
+					(boothdr->version & 0xffff0000) >> 16
+					);
+
+				if (bootloaderversion == boothdr->version)
+					updatebootloader = 0;
+			}
+
+			/* Calculate offset to firmware header */
+			tmp = (boothdr->firmwaresize + boothdr->bslsize) * 16 +
+				(sizeof(struct fw_header) +
+				sizeof(struct fw_header));
+
+			fwhdr = (struct fw_header *)(fw->data+tmp);
+		} else {
+			/* No second boot loader */
+			fwhdr = hdr;
+		}
+
+		dprintk(DBGLVL_FW, "Firmware version in file %d.%d.%d.%d\n",
+			(fwhdr->version & 0x0000fc00) >> 10,
+			(fwhdr->version & 0x000003e0) >> 5,
+			(fwhdr->version & 0x0000001f),
+			(fwhdr->version & 0xffff0000) >> 16
+			);
+
+		if (version == fwhdr->version) {
+			/* No download, firmware already on board */
+			ret = 0;
+			goto out;
+		}
+
+		if ((hdr->firmwaresize == 0) && (hdr->bslsize == 0)) {
+			if (updatebootloader) {
+				/* Get ready to upload the bootloader */
+				bootloadersize = (boothdr->firmwaresize +
+					boothdr->bslsize) * 16 +
+					sizeof(struct fw_header);
+
+				bootloaderoffset = (u8 *)(fw->data +
+					sizeof(struct fw_header));
+
+				dprintk(DBGLVL_FW, "bootloader d/l starts.\n");
+				printk(KERN_INFO "%s() FirmwareSize = 0x%x\n",
+					__func__, boothdr->firmwaresize);
+				printk(KERN_INFO "%s() BSLSize = 0x%x\n",
+					__func__, boothdr->bslsize);
+				printk(KERN_INFO "%s() Reserved = 0x%x\n",
+					__func__, boothdr->reserved);
+				printk(KERN_INFO "%s() Version = 0x%x\n",
+					__func__, boothdr->version);
+				ret = saa7164_downloadimage(
+					dev,
+					bootloaderoffset,
+					bootloadersize,
+					SAA_DOWNLOAD_FLAGS,
+					dev->bmmio + SAA_DEVICE_DOWNLOAD_OFFSET,
+					SAA_DEVICE_BUFFERBLOCKSIZE);
+				if (ret < 0) {
+					printk(KERN_ERR
+						"bootloader d/l has failed\n");
+					goto out;
+				}
+				dprintk(DBGLVL_FW,
+					"bootloader download complete.\n");
+
+			}
+
+			printk(KERN_ERR "starting firmware download(2)\n");
+			bootloadersize = (boothdr->firmwaresize +
+				boothdr->bslsize) * 16 +
+				sizeof(struct fw_header);
+
+			bootloaderoffset =
+				(u8 *)(fw->data + sizeof(struct fw_header));
+
+			fwloaderoffset = bootloaderoffset + bootloadersize;
+
+			/* TODO: fix this bounds overrun here with old f/ws */
+			fwloadersize = (fwhdr->firmwaresize + fwhdr->bslsize) *
+				16 + sizeof(struct fw_header);
+
+			ret = saa7164_downloadimage(
+				dev,
+				fwloaderoffset,
+				fwloadersize,
+				SAA_DEVICE_2ND_DOWNLOADFLAG_OFFSET,
+				dev->bmmio + SAA_DEVICE_2ND_DOWNLOAD_OFFSET,
+				SAA_DEVICE_2ND_BUFFERBLOCKSIZE);
+			if (ret < 0) {
+				printk(KERN_ERR "firmware download failed\n");
+				goto out;
+			}
+			printk(KERN_ERR "firmware download complete.\n");
+
+		} else {
+
+			/* No bootloader update reqd, download firmware only */
+			printk(KERN_ERR "starting firmware download(3)\n");
+
+			ret = saa7164_downloadimage(
+				dev,
+				(u8 *)fw->data,
+				fw->size,
+				SAA_DOWNLOAD_FLAGS,
+				dev->bmmio + SAA_DEVICE_DOWNLOAD_OFFSET,
+				SAA_DEVICE_BUFFERBLOCKSIZE);
+			if (ret < 0) {
+				printk(KERN_ERR "firmware download failed\n");
+				goto out;
+			}
+			printk(KERN_ERR "firmware download complete.\n");
+		}
+	}
+
+	ret = 0;
+
+out:
+	if (fw)
+		release_firmware(fw);
+
+	return ret;
+}
diff --git a/drivers/media/video/saa7164/saa7164-i2c.c b/drivers/media/video/saa7164/saa7164-i2c.c
new file mode 100644
index 00000000000..4c431b4ac8d
--- /dev/null
+++ b/drivers/media/video/saa7164/saa7164-i2c.c
@@ -0,0 +1,170 @@
+/*
+ *  Driver for the NXP SAA7164 PCIe bridge
+ *
+ *  Copyright (c) 2009 Steven Toth <stoth@kernellabs.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+
+#include "saa7164.h"
+
+static int i2c_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num)
+{
+	struct saa7164_i2c *bus = i2c_adap->algo_data;
+	struct saa7164_dev *dev = bus->dev;
+	int i, retval = 0;
+
+	dprintk(DBGLVL_I2C, "%s(num = %d)\n", __func__, num);
+
+	for (i = 0 ; i < num; i++) {
+		dprintk(DBGLVL_I2C, "%s(num = %d) addr = 0x%02x  len = 0x%x\n",
+			__func__, num, msgs[i].addr, msgs[i].len);
+		if (msgs[i].flags & I2C_M_RD) {
+			/* Unsupported - Yet*/
+			printk(KERN_ERR "%s() Unsupported - Yet\n", __func__);
+			continue;
+		} else if (i + 1 < num && (msgs[i + 1].flags & I2C_M_RD) &&
+			   msgs[i].addr == msgs[i + 1].addr) {
+			/* write then read from same address */
+
+			retval = saa7164_api_i2c_read(bus, msgs[i].addr,
+				msgs[i].len, msgs[i].buf,
+				msgs[i+1].len, msgs[i+1].buf
+				);
+
+			i++;
+
+			if (retval < 0)
+				goto err;
+		} else {
+			/* write */
+			retval = saa7164_api_i2c_write(bus, msgs[i].addr,
+				msgs[i].len, msgs[i].buf);
+		}
+		if (retval < 0)
+			goto err;
+	}
+	return num;
+
+ err:
+	return retval;
+}
+
+static int attach_inform(struct i2c_client *client)
+{
+	struct saa7164_i2c *bus = i2c_get_adapdata(client->adapter);
+	struct saa7164_dev *dev = bus->dev;
+
+	dprintk(DBGLVL_I2C, "%s i2c attach [addr=0x%x,client=%s]\n",
+		client->driver->driver.name, client->addr, client->name);
+
+	if (!client->driver->command)
+		return 0;
+
+	return 0;
+}
+
+static int detach_inform(struct i2c_client *client)
+{
+	struct saa7164_dev *dev = i2c_get_adapdata(client->adapter);
+
+	dprintk(DBGLVL_I2C, "i2c detach [client=%s]\n", client->name);
+
+	return 0;
+}
+
+void saa7164_call_i2c_clients(struct saa7164_i2c *bus, unsigned int cmd,
+	void *arg)
+{
+	if (bus->i2c_rc != 0)
+		return;
+
+	i2c_clients_command(&bus->i2c_adap, cmd, arg);
+}
+
+static u32 saa7164_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm saa7164_i2c_algo_template = {
+	.master_xfer	= i2c_xfer,
+	.functionality	= saa7164_functionality,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static struct i2c_adapter saa7164_i2c_adap_template = {
+	.name              = "saa7164",
+	.owner             = THIS_MODULE,
+	.id                = I2C_HW_B_SAA7164,
+	.algo              = &saa7164_i2c_algo_template,
+	.client_register   = attach_inform,
+	.client_unregister = detach_inform,
+};
+
+static struct i2c_client saa7164_i2c_client_template = {
+	.name	= "saa7164 internal",
+};
+
+int saa7164_i2c_register(struct saa7164_i2c *bus)
+{
+	struct saa7164_dev *dev = bus->dev;
+
+	dprintk(DBGLVL_I2C, "%s(bus = %d)\n", __func__, bus->nr);
+
+	memcpy(&bus->i2c_adap, &saa7164_i2c_adap_template,
+	       sizeof(bus->i2c_adap));
+
+	memcpy(&bus->i2c_algo, &saa7164_i2c_algo_template,
+	       sizeof(bus->i2c_algo));
+
+	memcpy(&bus->i2c_client, &saa7164_i2c_client_template,
+	       sizeof(bus->i2c_client));
+
+	bus->i2c_adap.dev.parent = &dev->pci->dev;
+
+	strlcpy(bus->i2c_adap.name, bus->dev->name,
+		sizeof(bus->i2c_adap.name));
+
+	bus->i2c_algo.data = bus;
+	bus->i2c_adap.algo_data = bus;
+	i2c_set_adapdata(&bus->i2c_adap, bus);
+	i2c_add_adapter(&bus->i2c_adap);
+
+	bus->i2c_client.adapter = &bus->i2c_adap;
+
+	if (0 == bus->i2c_rc) {
+		printk(KERN_ERR "%s: i2c bus %d registered\n",
+			dev->name, bus->nr);
+	} else
+		printk(KERN_ERR "%s: i2c bus %d register FAILED\n",
+			dev->name, bus->nr);
+
+	return bus->i2c_rc;
+}
+
+int saa7164_i2c_unregister(struct saa7164_i2c *bus)
+{
+	i2c_del_adapter(&bus->i2c_adap);
+	return 0;
+}
diff --git a/drivers/media/video/saa7164/saa7164-reg.h b/drivers/media/video/saa7164/saa7164-reg.h
new file mode 100644
index 00000000000..06be4c13d5b
--- /dev/null
+++ b/drivers/media/video/saa7164/saa7164-reg.h
@@ -0,0 +1,166 @@
+/*
+ *  Driver for the NXP SAA7164 PCIe bridge
+ *
+ *  Copyright (c) 2009 Steven Toth <stoth@kernellabs.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* TODO: Retest the driver with errors expressed as negatives */
+
+/* Result codes */
+#define SAA_OK				0
+#define SAA_ERR_BAD_PARAMETER		0x09
+#define SAA_ERR_NO_RESOURCES		0x0c
+#define SAA_ERR_NOT_SUPPORTED		0x13
+#define SAA_ERR_BUSY			0x15
+#define SAA_ERR_READ			0x17
+#define SAA_ERR_TIMEOUT			0x1f
+#define SAA_ERR_OVERFLOW		0x20
+#define SAA_ERR_EMPTY			0x22
+#define SAA_ERR_NOT_STARTED		0x23
+#define SAA_ERR_ALREADY_STARTED		0x24
+#define SAA_ERR_NOT_STOPPED		0x25
+#define SAA_ERR_ALREADY_STOPPED		0x26
+#define SAA_ERR_INVALID_COMMAND		0x3e
+#define SAA_ERR_NULL_PACKET		0x59
+
+/* Errors and flags from the silicon */
+#define PVC_ERRORCODE_UNKNOWN		0x00
+#define PVC_ERRORCODE_INVALID_COMMAND	0x01
+#define PVC_ERRORCODE_INVALID_CONTROL	0x02
+#define PVC_ERRORCODE_INVALID_DATA	0x03
+#define PVC_ERRORCODE_TIMEOUT		0x04
+#define PVC_ERRORCODE_NAK		0x05
+#define PVC_RESPONSEFLAG_ERROR		0x01
+#define PVC_RESPONSEFLAG_OVERFLOW	0x02
+#define PVC_RESPONSEFLAG_RESET		0x04
+#define PVC_RESPONSEFLAG_INTERFACE	0x08
+#define PVC_RESPONSEFLAG_CONTINUED	0x10
+#define PVC_CMDFLAG_INTERRUPT		0x02
+#define PVC_CMDFLAG_INTERFACE		0x04
+#define PVC_CMDFLAG_SERIALIZE		0x08
+#define PVC_CMDFLAG_CONTINUE		0x10
+
+/* Silicon Commands */
+#define GET_DESCRIPTORS_CONTROL		0x01
+#define GET_STRING_CONTROL		0x03
+#define GET_LANGUAGE_CONTROL		0x05
+#define SET_POWER_CONTROL		0x07
+#define GET_FW_VERSION_CONTROL		0x09
+#define SET_DEBUG_LEVEL_CONTROL		0x0B
+#define GET_DEBUG_DATA_CONTROL		0x0C
+#define GET_PRODUCTION_INFO_CONTROL	0x0D
+
+/* cmd defines */
+#define SAA_CMDFLAG_CONTINUE		0x10
+#define SAA_CMD_MAX_MSG_UNITS		256
+
+/* Some defines */
+#define SAA_BUS_TIMEOUT			50
+#define SAA_DEVICE_TIMEOUT		5000
+#define SAA_DEVICE_MAXREQUESTSIZE	256
+
+/* Register addresses */
+#define SAA_DEVICE_VERSION		0x30
+#define SAA_DOWNLOAD_FLAGS		0x34
+#define SAA_DOWNLOAD_FLAG		0x34
+#define SAA_DOWNLOAD_FLAG_ACK		0x38
+#define SAA_DATAREADY_FLAG		0x3C
+#define SAA_DATAREADY_FLAG_ACK		0x40
+
+/* Boot loader register and bit definitions */
+#define SAA_BOOTLOADERERROR_FLAGS	0x44
+#define SAA_DEVICE_IMAGE_SEARCHING	0x01
+#define SAA_DEVICE_IMAGE_LOADING	0x02
+#define SAA_DEVICE_IMAGE_BOOTING	0x03
+#define SAA_DEVICE_IMAGE_CORRUPT	0x04
+#define SAA_DEVICE_MEMORY_CORRUPT	0x08
+#define SAA_DEVICE_NO_IMAGE		0x10
+
+/* Register addresses */
+#define SAA_DEVICE_2ND_VERSION			0x50
+#define SAA_DEVICE_2ND_DOWNLOADFLAG_OFFSET	0x54
+
+/* Register addresses */
+#define SAA_SECONDSTAGEERROR_FLAGS		0x64
+
+/* Bootloader regs and flags */
+#define SAA_DEVICE_DEADLOCK_DETECTED_OFFSET	0x6C
+#define SAA_DEVICE_DEADLOCK_DETECTED		0xDEADDEAD
+
+/* Basic firmware status registers */
+#define SAA_DEVICE_SYSINIT_STATUS_OFFSET	0x70
+#define SAA_DEVICE_SYSINIT_STATUS		0x70
+#define SAA_DEVICE_SYSINIT_MODE			0x74
+#define SAA_DEVICE_SYSINIT_SPEC			0x78
+#define SAA_DEVICE_SYSINIT_INST			0x7C
+#define SAA_DEVICE_SYSINIT_CPULOAD		0x80
+#define SAA_DEVICE_SYSINIT_REMAINHEAP		0x84
+
+#define SAA_DEVICE_DOWNLOAD_OFFSET		0x1000
+#define SAA_DEVICE_BUFFERBLOCKSIZE		0x1000
+
+#define SAA_DEVICE_2ND_BUFFERBLOCKSIZE		0x100000
+#define SAA_DEVICE_2ND_DOWNLOAD_OFFSET		0x200000
+
+/* Descriptors */
+#define CS_INTERFACE	0x24
+
+/* Descriptor subtypes */
+#define VC_INPUT_TERMINAL		0x02
+#define VC_OUTPUT_TERMINAL		0x03
+#define VC_SELECTOR_UNIT		0x04
+#define VC_PROCESSING_UNIT		0x05
+#define FEATURE_UNIT			0x06
+#define TUNER_UNIT			0x09
+#define ENCODER_UNIT			0x0A
+#define EXTENSION_UNIT			0x0B
+#define VC_TUNER_PATH			0xF0
+#define PVC_HARDWARE_DESCRIPTOR		0xF1
+#define PVC_INTERFACE_DESCRIPTOR	0xF2
+#define PVC_INFRARED_UNIT		0xF3
+#define DRM_UNIT			0xF4
+#define GENERAL_REQUEST			0xF5
+
+/* Format Types */
+#define VS_FORMAT_TYPE         0x02
+#define VS_FORMAT_TYPE_I       0x01
+#define VS_FORMAT_UNCOMPRESSED 0x04
+#define VS_FRAME_UNCOMPRESSED  0x05
+#define VS_FORMAT_MPEG2PS      0x09
+#define VS_FORMAT_MPEG2TS      0x0A
+#define VS_FORMAT_MPEG4SL      0x0B
+#define VS_FORMAT_WM9          0x0C
+#define VS_FORMAT_DIVX         0x0D
+#define VS_FORMAT_VBI          0x0E
+#define VS_FORMAT_RDS          0x0F
+
+/* Device extension commands */
+#define EXU_REGISTER_ACCESS_CONTROL	0x00
+#define EXU_GPIO_CONTROL		0x01
+#define EXU_GPIO_GROUP_CONTROL		0x02
+#define EXU_INTERRUPT_CONTROL		0x03
+
+/* State Transition and args */
+#define SAA_STATE_CONTROL	0x03
+#define SAA_DMASTATE_STOP	0x00
+#define SAA_DMASTATE_ACQUIRE	0x01
+#define SAA_DMASTATE_PAUSE	0x02
+#define SAA_DMASTATE_RUN	0x03
+
+/* Hardware registers */
+
diff --git a/drivers/media/video/saa7164/saa7164-types.h b/drivers/media/video/saa7164/saa7164-types.h
new file mode 100644
index 00000000000..99093f23aae
--- /dev/null
+++ b/drivers/media/video/saa7164/saa7164-types.h
@@ -0,0 +1,287 @@
+/*
+ *  Driver for the NXP SAA7164 PCIe bridge
+ *
+ *  Copyright (c) 2009 Steven Toth <stoth@kernellabs.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* TODO: Cleanup and shorten the namespace */
+
+/* Some structues are passed directly to/from the firmware and
+ * have strict alignment requirements. This is one of them.
+ */
+typedef struct {
+	u8	bLength;
+	u8	bDescriptorType;
+	u8	bDescriptorSubtype;
+	u16	bcdSpecVersion;
+	u32	dwClockFrequency;
+	u32	dwClockUpdateRes;
+	u8	bCapabilities;
+	u32	dwDeviceRegistersLocation;
+	u32	dwHostMemoryRegion;
+	u32	dwHostMemoryRegionSize;
+	u32	dwHostHibernatMemRegion;
+	u32	dwHostHibernatMemRegionSize;
+} __attribute__((packed)) tmComResHWDescr_t;
+
+/* This is DWORD aligned on windows but I can't find the right
+ * gcc syntax to match the binary data from the device.
+ * I've manually padded with Reserved[3] bytes to match the hardware,
+ * but this could break if GCC decies to pack in a different way.
+ */
+typedef struct {
+	u8	bLength;
+	u8	bDescriptorType;
+	u8	bDescriptorSubtype;
+	u8	bFlags;
+	u8	bInterfaceType;
+	u8	bInterfaceId;
+	u8	bBaseInterface;
+	u8	bInterruptId;
+	u8	bDebugInterruptId;
+	u8	BARLocation;
+	u8	Reserved[3];
+} tmComResInterfaceDescr_t;
+
+typedef struct {
+	u64	CommandRing;
+	u64	ResponseRing;
+	u32	CommandWrite;
+	u32	CommandRead;
+	u32	ResponseWrite;
+	u32	ResponseRead;
+} tmComResBusDescr_t;
+
+typedef enum {
+	NONE		= 0,
+	TYPE_BUS_PCI	= 1,
+	TYPE_BUS_PCIe	= 2,
+	TYPE_BUS_USB	= 3,
+	TYPE_BUS_I2C	= 4
+} tmBusType_t;
+
+typedef struct {
+	tmBusType_t Type;
+	u16	m_wMaxReqSize;
+	u8	*m_pdwSetRing;
+	u32	m_dwSizeSetRing;
+	u8	*m_pdwGetRing;
+	u32	m_dwSizeGetRing;
+	u32	*m_pdwSetWritePos;
+	u32	*m_pdwSetReadPos;
+	u32	*m_pdwGetWritePos;
+	u32	*m_pdwGetReadPos;
+
+	/* All access is protected */
+	struct mutex lock;
+
+} tmComResBusInfo_t;
+
+typedef struct {
+	u8	id;
+	u8	flags;
+	u16	size;
+	u32	command;
+	u16	controlselector;
+	u8	seqno;
+} __attribute__((packed)) tmComResInfo_t;
+
+typedef enum {
+	SET_CUR  = 0x01,
+	GET_CUR  = 0x81,
+	GET_MIN  = 0x82,
+	GET_MAX  = 0x83,
+	GET_RES  = 0x84,
+	GET_LEN  = 0x85,
+	GET_INFO = 0x86,
+	GET_DEF  = 0x87
+} tmComResCmd_t;
+
+struct cmd {
+	u8 seqno;
+	u32 inuse;
+	u32 timeout;
+	u32 signalled;
+	struct mutex lock;
+	wait_queue_head_t wait;
+};
+
+typedef struct {
+	u32	pathid;
+	u32	size;
+	void	*descriptor;
+} tmDescriptor_t;
+
+typedef struct {
+	u8	len;
+	u8	type;
+	u8	subtype;
+	u8	unitid;
+} __attribute__((packed)) tmComResDescrHeader_t;
+
+typedef struct {
+	u8	len;
+	u8	type;
+	u8	subtype;
+	u8	unitid;
+	u32	devicetype;
+	u16	deviceid;
+	u32	numgpiopins;
+	u8	numgpiogroups;
+	u8	controlsize;
+} __attribute__((packed)) tmComResExtDevDescrHeader_t;
+
+typedef struct {
+	u32	pin;
+	u8	state;
+} __attribute__((packed)) tmComResGPIO_t;
+
+typedef struct {
+	u8	len;
+	u8	type;
+	u8	subtype;
+	u8	pathid;
+} __attribute__((packed)) tmComResPathDescrHeader_t;
+
+/* terminaltype */
+typedef enum {
+	ITT_ANTENNA              = 0x0203,
+	LINE_CONNECTOR           = 0x0603,
+	SPDIF_CONNECTOR          = 0x0605,
+	COMPOSITE_CONNECTOR      = 0x0401,
+	SVIDEO_CONNECTOR         = 0x0402,
+	COMPONENT_CONNECTOR      = 0x0403,
+	STANDARD_DMA             = 0xF101
+} tmComResTermType_t;
+
+typedef struct {
+	u8	len;
+	u8	type;
+	u8	subtype;
+	u8	terminalid;
+	u16	terminaltype;
+	u8	assocterminal;
+	u8	iterminal;
+	u8	controlsize;
+} __attribute__((packed)) tmComResAntTermDescrHeader_t;
+
+typedef struct {
+	u8	len;
+	u8	type;
+	u8	subtype;
+	u8	unitid;
+	u8	sourceid;
+	u8	iunit;
+	u32	tuningstandards;
+	u8	controlsize;
+	u32	controls;
+} __attribute__((packed)) tmComResTunerDescrHeader_t;
+
+typedef enum {
+	/* the buffer does not contain any valid data */
+	TM_BUFFER_FLAG_EMPTY,
+
+	/* the buffer is filled with valid data */
+	TM_BUFFER_FLAG_DONE,
+
+	/* the buffer is the dummy buffer - TODO??? */
+	TM_BUFFER_FLAG_DUMMY_BUFFER
+} tmBufferFlag_t;
+
+typedef struct {
+	u64		*pagetablevirt;
+	u64		pagetablephys;
+	u16		offset;
+	u8		*context;
+	u64		timestamp;
+	tmBufferFlag_t	BufferFlag_t;
+	u32		lostbuffers;
+	u32		validbuffers;
+	u64		*dummypagevirt;
+	u64		dummypagephys;
+	u64		*addressvirt;
+} tmBuffer_t;
+
+typedef struct {
+	u32	bitspersample;
+	u32	samplesperline;
+	u32	numberoflines;
+	u32	pitch;
+	u32	linethreshold;
+	u64	**pagetablelistvirt;
+	u64	*pagetablelistphys;
+	u32	numpagetables;
+	u32	numpagetableentries;
+} tmHWStreamParameters_t;
+
+typedef struct {
+	tmHWStreamParameters_t		HWStreamParameters_t;
+	u64				qwDummyPageTablePhys;
+	u64				*pDummyPageTableVirt;
+} tmStreamParameters_t;
+
+typedef struct {
+	u8	len;
+	u8	type;
+	u8	subtyle;
+	u8	unitid;
+	u16	terminaltype;
+	u8	assocterminal;
+	u8	sourceid;
+	u8	iterminal;
+	u32	BARLocation;
+	u8	flags;
+	u8	interruptid;
+	u8	buffercount;
+	u8	metadatasize;
+	u8	numformats;
+	u8	controlsize;
+} __attribute__((packed)) tmComResDMATermDescrHeader_t;
+
+/*
+ *
+ * Description:
+ *  This is the transport stream format header.
+ *
+ * Settings:
+ *  bLength                 - The size of this descriptor in bytes.
+ *  bDescriptorType         - CS_INTERFACE.
+ *  bDescriptorSubtype      - VS_FORMAT_MPEG2TS descriptor subtype.
+ *  bFormatIndex            - A non-zero constant that uniquely identifies the
+ *                            format.
+ *  bDataOffset             - Offset to TSP packet within MPEG-2 TS transport
+ *                            stride, in bytes.
+ *  bPacketLength           - Length of TSP packet, in bytes (typically 188).
+ *  bStrideLength           - Length of MPEG-2 TS transport stride.
+ *  guidStrideFormat        - A Globally Unique Identifier indicating the
+ *                            format of the stride data (if any). Set to zeros
+ *                            if there is no Stride Data, or if the Stride
+ *                            Data is to be ignored by the application.
+ *
+ */
+typedef struct {
+	u8	len;
+	u8	type;
+	u8	subtype;
+	u8	bFormatIndex;
+	u8	bDataOffset;
+	u8	bPacketLength;
+	u8	bStrideLength;
+	u8	guidStrideFormat[16];
+} __attribute__((packed)) tmComResTSFormatDescrHeader_t;
+
diff --git a/drivers/media/video/saa7164/saa7164.h b/drivers/media/video/saa7164/saa7164.h
new file mode 100644
index 00000000000..ed38118ffde
--- /dev/null
+++ b/drivers/media/video/saa7164/saa7164.h
@@ -0,0 +1,401 @@
+/*
+ *  Driver for the NXP SAA7164 PCIe bridge
+ *
+ *  Copyright (c) 2009 Steven Toth <stoth@kernellabs.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+	Driver architecture
+	*******************
+
+	saa7164_core.c/buffer.c/cards.c/i2c.c/dvb.c
+		|	: Standard Linux driver framework for creating
+		|	: exposing and managing interfaces to the rest
+		|	: of the kernel or userland. Also uses _fw.c to load
+		|	: firmware direct into the PCIe bus, bypassing layers.
+		V
+	saa7164_api..()	: Translate kernel specific functions/features
+		|	: into command buffers.
+		V
+	saa7164_cmd..()	: Manages the flow of command packets on/off,
+		|	: the bus. Deal with bus errors, timeouts etc.
+		V
+	saa7164_bus..() : Manage a read/write memory ring buffer in the
+		|	: PCIe Address space.
+		|
+		|		saa7164_fw...()	: Load any frimware
+		|			|	: direct into the device
+		V			V
+	<- ----------------- PCIe address space -------------------- ->
+*/
+
+#include <linux/pci.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/kdev_t.h>
+
+#include <media/tuner.h>
+#include <media/tveeprom.h>
+#include <media/videobuf-dma-sg.h>
+#include <media/videobuf-dvb.h>
+
+#include "saa7164-reg.h"
+#include "saa7164-types.h"
+
+#include <linux/version.h>
+#include <linux/mutex.h>
+
+#define SAA7164_MAXBOARDS 8
+
+#define UNSET (-1U)
+#define SAA7164_BOARD_NOAUTO			UNSET
+#define SAA7164_BOARD_UNKNOWN			0
+#define SAA7164_BOARD_UNKNOWN_REV2		1
+#define SAA7164_BOARD_UNKNOWN_REV3		2
+#define SAA7164_BOARD_HAUPPAUGE_HVR2250		3
+#define SAA7164_BOARD_HAUPPAUGE_HVR2200		4
+#define SAA7164_BOARD_HAUPPAUGE_HVR2200_2	5
+#define SAA7164_BOARD_HAUPPAUGE_HVR2200_3	6
+#define SAA7164_BOARD_HAUPPAUGE_HVR2250_2	7
+
+#define SAA7164_MAX_UNITS		8
+#define SAA7164_TS_NUMBER_OF_LINES	312
+#define SAA7164_PT_ENTRIES		16 /* (312 * 188) / 4096 */
+
+#define DBGLVL_FW    4
+#define DBGLVL_DVB   8
+#define DBGLVL_I2C  16
+#define DBGLVL_API  32
+#define DBGLVL_CMD  64
+#define DBGLVL_BUS 128
+#define DBGLVL_IRQ 256
+#define DBGLVL_BUF 512
+
+enum port_t {
+	SAA7164_MPEG_UNDEFINED = 0,
+	SAA7164_MPEG_DVB,
+};
+
+enum saa7164_i2c_bus_nr {
+	SAA7164_I2C_BUS_0 = 0,
+	SAA7164_I2C_BUS_1,
+	SAA7164_I2C_BUS_2,
+};
+
+enum saa7164_buffer_flags {
+	SAA7164_BUFFER_UNDEFINED = 0,
+	SAA7164_BUFFER_FREE,
+	SAA7164_BUFFER_BUSY,
+	SAA7164_BUFFER_FULL
+};
+
+enum saa7164_unit_type {
+	SAA7164_UNIT_UNDEFINED = 0,
+	SAA7164_UNIT_DIGITAL_DEMODULATOR,
+	SAA7164_UNIT_ANALOG_DEMODULATOR,
+	SAA7164_UNIT_TUNER,
+	SAA7164_UNIT_EEPROM,
+	SAA7164_UNIT_ZILOG_IRBLASTER,
+	SAA7164_UNIT_ENCODER,
+};
+
+/* The PCIe bridge doesn't grant direct access to i2c.
+ * Instead, you address i2c devices using a uniqely
+ * allocated 'unitid' value via a messaging API. This
+ * is a problem. The kernel and existing demod/tuner
+ * drivers expect to talk 'i2c', so we have to maintain
+ * a translation layer, and a series of functions to
+ * convert i2c bus + device address into a unit id.
+ */
+struct saa7164_unit {
+	enum saa7164_unit_type type;
+	u8	id;
+	char	*name;
+	enum saa7164_i2c_bus_nr i2c_bus_nr;
+	u8	i2c_bus_addr;
+	u8	i2c_reg_len;
+};
+
+struct saa7164_board {
+	char	*name;
+	enum port_t porta, portb;
+	enum {
+		SAA7164_CHIP_UNDEFINED = 0,
+		SAA7164_CHIP_REV2,
+		SAA7164_CHIP_REV3,
+	} chiprev;
+	struct	saa7164_unit unit[SAA7164_MAX_UNITS];
+};
+
+struct saa7164_subid {
+	u16     subvendor;
+	u16     subdevice;
+	u32     card;
+};
+
+struct saa7164_fw_status {
+
+	/* RISC Core details */
+	u32	status;
+	u32	mode;
+	u32	spec;
+	u32	inst;
+	u32	cpuload;
+	u32	remainheap;
+
+	/* Firmware version */
+	u32	version;
+	u32	major;
+	u32	sub;
+	u32	rel;
+	u32	buildnr;
+};
+
+struct saa7164_dvb {
+	struct mutex lock;
+	struct dvb_adapter adapter;
+	struct dvb_frontend *frontend;
+	struct dvb_demux demux;
+	struct dmxdev dmxdev;
+	struct dmx_frontend fe_hw;
+	struct dmx_frontend fe_mem;
+	struct dvb_net net;
+	int feeding;
+};
+
+struct saa7164_i2c {
+	struct saa7164_dev		*dev;
+
+	enum saa7164_i2c_bus_nr		nr;
+
+	/* I2C I/O */
+	struct i2c_adapter		i2c_adap;
+	struct i2c_algo_bit_data	i2c_algo;
+	struct i2c_client		i2c_client;
+	u32				i2c_rc;
+};
+
+struct saa7164_tsport;
+
+struct saa7164_buffer {
+	struct list_head list;
+
+	u32 nr;
+
+	struct saa7164_tsport *port;
+
+	/* Hardware Specific */
+	/* PCI Memory allocations */
+	enum saa7164_buffer_flags flags; /* Free, Busy, Full */
+
+	/* A block of page align PCI memory */
+	u32 pci_size;	/* PCI allocation size in bytes */
+	u64 *cpu;	/* Virtual address */
+	dma_addr_t dma;	/* Physical address */
+
+	/* A page table that splits the block into a number of entries */
+	u32 pt_size;		/* PCI allocation size in bytes */
+	u64 *pt_cpu;		/* Virtual address */
+	dma_addr_t pt_dma;	/* Physical address */
+};
+
+struct saa7164_tsport {
+
+	struct saa7164_dev *dev;
+	int nr;
+	enum port_t type;
+
+	struct saa7164_dvb dvb;
+
+	/* HW related stream parameters */
+	tmHWStreamParameters_t hw_streamingparams;
+
+	/* DMA configuration values, is seeded during initialization */
+	tmComResDMATermDescrHeader_t hwcfg;
+
+	/* hardware specific registers */
+	u32 bufcounter;
+	u32 pitch;
+	u32 bufsize;
+	u32 bufoffset;
+	u32 bufptr32l;
+	u32 bufptr32h;
+	u64 bufptr64;
+
+	u32 numpte;	/* Number of entries in array, only valid in head */
+	struct mutex dmaqueue_lock;
+	struct mutex dummy_dmaqueue_lock;
+	struct saa7164_buffer dmaqueue;
+	struct saa7164_buffer dummy_dmaqueue;
+
+};
+
+struct saa7164_dev {
+	struct list_head	devlist;
+	atomic_t		refcount;
+
+	/* pci stuff */
+	struct pci_dev	*pci;
+	unsigned char	pci_rev, pci_lat;
+	int		pci_bus, pci_slot;
+	u32		__iomem *lmmio;
+	u8		__iomem *bmmio;
+	u32		__iomem *lmmio2;
+	u8		__iomem *bmmio2;
+	int		pci_irqmask;
+
+	/* board details */
+	int	nr;
+	int	hwrevision;
+	u32	board;
+	char	name[32];
+
+	/* firmware status */
+	struct saa7164_fw_status	fw_status;
+
+	tmComResHWDescr_t		hwdesc;
+	tmComResInterfaceDescr_t	intfdesc;
+	tmComResBusDescr_t		busdesc;
+
+	tmComResBusInfo_t		bus;
+
+	/* TODO: Urgh, remove volatiles */
+	volatile u32			*InterruptStatus;
+	volatile u32			*InterruptAck;
+
+	struct cmd			cmds[SAA_CMD_MAX_MSG_UNITS];
+	struct mutex			lock;
+
+	/* I2c related */
+	struct saa7164_i2c i2c_bus[3];
+
+	/* Transport related */
+	struct saa7164_tsport ts1, ts2;
+
+	/* Deferred command/api interrupts handling */
+	struct work_struct workcmd;
+
+};
+
+extern struct list_head saa7164_devlist;
+
+/* ----------------------------------------------------------- */
+/* saa7164-core.c                                              */
+void saa7164_dumpregs(struct saa7164_dev *dev, u32 addr);
+void saa7164_dumphex16(struct saa7164_dev *dev, u8 *buf, int len);
+void saa7164_getfirmwarestatus(struct saa7164_dev *dev);
+u32 saa7164_getcurrentfirmwareversion(struct saa7164_dev *dev);
+
+/* ----------------------------------------------------------- */
+/* saa7164-fw.c                                                */
+int saa7164_downloadfirmware(struct saa7164_dev *dev);
+
+/* ----------------------------------------------------------- */
+/* saa7164-i2c.c                                               */
+extern int saa7164_i2c_register(struct saa7164_i2c *bus);
+extern int saa7164_i2c_unregister(struct saa7164_i2c *bus);
+extern void saa7164_call_i2c_clients(struct saa7164_i2c *bus,
+	unsigned int cmd, void *arg);
+
+/* ----------------------------------------------------------- */
+/* saa7164-bus.c                                               */
+int saa7164_bus_setup(struct saa7164_dev *dev);
+void saa7164_bus_dump(struct saa7164_dev *dev);
+int saa7164_bus_set(struct saa7164_dev *dev, tmComResInfo_t* msg, void *buf);
+int saa7164_bus_get(struct saa7164_dev *dev, tmComResInfo_t* msg,
+	void *buf, int peekonly);
+
+/* ----------------------------------------------------------- */
+/* saa7164-cmd.c                                               */
+int saa7164_cmd_send(struct saa7164_dev *dev,
+	u8 id, tmComResCmd_t command, u16 controlselector,
+	u16 size, void *buf);
+void saa7164_cmd_signal(struct saa7164_dev *dev, u8 seqno);
+
+/* ----------------------------------------------------------- */
+/* saa7164-api.c                                               */
+int saa7164_api_test(struct saa7164_dev *dev);
+int saa7164_api_get_fw_version(struct saa7164_dev *dev, u32 *version);
+int saa7164_api_enum_subdevs(struct saa7164_dev *dev);
+int saa7164_api_i2c_read(struct saa7164_i2c *bus, u8 addr, u32 reglen, u8 *reg,
+	u32 datalen, u8 *data);
+int saa7164_api_i2c_write(struct saa7164_i2c *bus, u8 addr,
+	u32 datalen, u8 *data);
+int saa7164_api_dif_write(struct saa7164_i2c *bus, u8 addr,
+	u32 datalen, u8 *data);
+int saa7164_api_read_eeprom(struct saa7164_dev *dev, u8 *buf, int buflen);
+int saa7164_api_set_gpiobit(struct saa7164_dev *dev, u8 unitid, u8 pin);
+int saa7164_api_clear_gpiobit(struct saa7164_dev *dev, u8 unitid, u8 pin);
+int saa7164_api_transition_port(struct saa7164_tsport *port, u8 mode);
+
+/* ----------------------------------------------------------- */
+/* saa7164-cards.c                                             */
+extern struct saa7164_board saa7164_boards[];
+extern const unsigned int saa7164_bcount;
+
+extern struct saa7164_subid saa7164_subids[];
+extern const unsigned int saa7164_idcount;
+
+extern void saa7164_card_list(struct saa7164_dev *dev);
+extern void saa7164_gpio_setup(struct saa7164_dev *dev);
+extern void saa7164_card_setup(struct saa7164_dev *dev);
+
+extern int saa7164_i2caddr_to_reglen(struct saa7164_i2c *bus, int addr);
+extern int saa7164_i2caddr_to_unitid(struct saa7164_i2c *bus, int addr);
+extern char *saa7164_unitid_name(struct saa7164_dev *dev, u8 unitid);
+
+/* ----------------------------------------------------------- */
+/* saa7164-dvb.c                                               */
+extern int saa7164_dvb_register(struct saa7164_tsport *port);
+extern int saa7164_dvb_unregister(struct saa7164_tsport *port);
+
+/* ----------------------------------------------------------- */
+/* saa7164-buffer.c                                            */
+extern struct saa7164_buffer *saa7164_buffer_alloc(struct saa7164_tsport *port,
+	u32 len);
+extern int saa7164_buffer_dealloc(struct saa7164_tsport *port,
+	struct saa7164_buffer *buf);
+
+/* ----------------------------------------------------------- */
+
+extern unsigned int debug;
+#define dprintk(level, fmt, arg...)\
+	do { if (debug & level)\
+		printk(KERN_DEBUG "%s: " fmt, dev->name, ## arg);\
+	} while (0)
+
+#define log_warn(fmt, arg...)\
+	do { \
+		printk(KERN_WARNING "%s: " fmt, dev->name, ## arg);\
+	} while (0)
+
+#define log_err(fmt, arg...)\
+	do { \
+		printk(KERN_ERROR "%s: " fmt, dev->name, ## arg);\
+	} while (0)
+
+#define saa7164_readl(reg) readl(dev->lmmio + ((reg) >> 2))
+#define saa7164_writel(reg, value) \
+do { \
+	printk(KERN_ERR "writel(%x, %llx)\n", value, (u64)(dev->lmmio + ((reg) >> 2))); \
+	writel((value), dev->lmmio + ((reg) >> 2)); \
+} while (0)
+
+#define saa7164_readb(reg)             readl(dev->bmmio + (reg))
+#define saa7164_writeb(reg, value)     writel((value), dev->bmmio + (reg))
+
-- 
cgit v1.2.3


From 207b42c492cc335806957c139381eb260a808837 Mon Sep 17 00:00:00 2001
From: Steven Toth <stoth@kernellabs.com>
Date: Sat, 9 May 2009 21:30:05 -0300
Subject: V4L/DVB (12924): SAA7164: Fix some 32/64bit compile time warnings

SAA7164: Fix some 32/64bit compile time warnings

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7164/saa7164-api.c    |  4 ++--
 drivers/media/video/saa7164/saa7164-buffer.c | 11 ++++-------
 drivers/media/video/saa7164/saa7164-bus.c    |  4 ++--
 drivers/media/video/saa7164/saa7164-core.c   | 20 ++++++++++----------
 drivers/media/video/saa7164/saa7164-dvb.c    | 12 ++++++------
 drivers/media/video/saa7164/saa7164.h        |  7 ++-----
 6 files changed, 26 insertions(+), 32 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7164/saa7164-api.c b/drivers/media/video/saa7164/saa7164-api.c
index 8cef1df9b54..105b68ef61e 100644
--- a/drivers/media/video/saa7164/saa7164-api.c
+++ b/drivers/media/video/saa7164/saa7164-api.c
@@ -129,8 +129,8 @@ int saa7164_api_dump_subdevs(struct saa7164_dev *dev, u8 *buf, int len)
 	u32 currpath = 0;
 
 	dprintk(DBGLVL_API,
-		"%s(?,?,%d) sizeof(tmComResDescrHeader_t) = %lu bytes\n",
-		__func__, len, sizeof(tmComResDescrHeader_t));
+		"%s(?,?,%d) sizeof(tmComResDescrHeader_t) = %d bytes\n",
+		__func__, len, (u32)sizeof(tmComResDescrHeader_t));
 
 	for (idx = 0; idx < (len - sizeof(tmComResDescrHeader_t)); ) {
 
diff --git a/drivers/media/video/saa7164/saa7164-buffer.c b/drivers/media/video/saa7164/saa7164-buffer.c
index 4176544ee01..240c6dcb496 100644
--- a/drivers/media/video/saa7164/saa7164-buffer.c
+++ b/drivers/media/video/saa7164/saa7164-buffer.c
@@ -107,19 +107,16 @@ struct saa7164_buffer *saa7164_buffer_alloc(struct saa7164_tsport *port,
 	memset(buf->pt_cpu, 0xff, buf->pt_size);
 
 	dprintk(DBGLVL_BUF, "%s()   allocated buffer @ 0x%p\n", __func__, buf);
-	dprintk(DBGLVL_BUF, "  pci_cpu @ 0x%llx    dma @ 0x%llx len = 0x%x\n",
-		(u64)buf->cpu, (u64)buf->dma, buf->pci_size);
-	dprintk(DBGLVL_BUF, "   pt_cpu @ 0x%llx pt_dma @ 0x%llx len = 0x%x\n",
-		(u64)buf->pt_cpu, (u64)buf->pt_dma, buf->pt_size);
+	dprintk(DBGLVL_BUF, "  pci_cpu @ 0x%p    dma @ 0x%p len = 0x%x\n",
+		buf->cpu, (void *)buf->dma, buf->pci_size);
+	dprintk(DBGLVL_BUF, "   pt_cpu @ 0x%p pt_dma @ 0x%p len = 0x%x\n",
+		buf->pt_cpu, (void *)buf->pt_dma, buf->pt_size);
 
 	/* Format the Page Table Entries to point into the data buffer */
 	for (i = 0 ; i < SAA7164_PT_ENTRIES; i++) {
 
 		*(buf->pt_cpu + i) = buf->dma + (i * 0x1000); /* TODO */
 
-		dprintk(DBGLVL_BUF, "    pt[%02d] = 0x%llx -> 0x%llx\n",
-			i, (u64)buf->pt_cpu, (u64)*(buf->pt_cpu));
-
 	}
 
 	goto ret;
diff --git a/drivers/media/video/saa7164/saa7164-bus.c b/drivers/media/video/saa7164/saa7164-bus.c
index 28f630dc49c..8d813f5b54a 100644
--- a/drivers/media/video/saa7164/saa7164-bus.c
+++ b/drivers/media/video/saa7164/saa7164-bus.c
@@ -210,8 +210,8 @@ int saa7164_bus_set(struct saa7164_dev *dev, tmComResInfo_t* msg, void *buf)
 		dprintk(DBGLVL_BUS, "%s() space_rem = %x\n", __func__,
 			space_rem);
 
-		dprintk(DBGLVL_BUS, "%s() sizeof(*msg) = %lu\n", __func__,
-			sizeof(*msg));
+		dprintk(DBGLVL_BUS, "%s() sizeof(*msg) = %d\n", __func__,
+			(u32)sizeof(*msg));
 
 		if (space_rem < sizeof(*msg)) {
 			dprintk(DBGLVL_BUS, "%s() tr4\n", __func__);
diff --git a/drivers/media/video/saa7164/saa7164-core.c b/drivers/media/video/saa7164/saa7164-core.c
index 04957090f83..4b155a3d6c1 100644
--- a/drivers/media/video/saa7164/saa7164-core.c
+++ b/drivers/media/video/saa7164/saa7164-core.c
@@ -281,8 +281,8 @@ void saa7164_dumpregs(struct saa7164_dev *dev, u32 addr)
 
 static void saa7164_dump_hwdesc(struct saa7164_dev *dev)
 {
-	dprintk(1, "@0x%p hwdesc sizeof(tmComResHWDescr_t) = %lu bytes\n",
-		&dev->hwdesc, sizeof(tmComResHWDescr_t));
+	dprintk(1, "@0x%p hwdesc sizeof(tmComResHWDescr_t) = %d bytes\n",
+		&dev->hwdesc, (u32)sizeof(tmComResHWDescr_t));
 
 	dprintk(1, " .bLength = 0x%x\n", dev->hwdesc.bLength);
 	dprintk(1, " .bDescriptorType = 0x%x\n", dev->hwdesc.bDescriptorType);
@@ -312,8 +312,8 @@ static void saa7164_dump_hwdesc(struct saa7164_dev *dev)
 static void saa7164_dump_intfdesc(struct saa7164_dev *dev)
 {
 	dprintk(1, "@0x%p intfdesc "
-		"sizeof(tmComResInterfaceDescr_t) = %lu bytes\n",
-		&dev->intfdesc, sizeof(tmComResInterfaceDescr_t));
+		"sizeof(tmComResInterfaceDescr_t) = %d bytes\n",
+		&dev->intfdesc, (u32)sizeof(tmComResInterfaceDescr_t));
 
 	dprintk(1, " .bLength = 0x%x\n", dev->intfdesc.bLength);
 	dprintk(1, " .bDescriptorType = 0x%x\n", dev->intfdesc.bDescriptorType);
@@ -333,8 +333,8 @@ static void saa7164_dump_intfdesc(struct saa7164_dev *dev)
 
 static void saa7164_dump_busdesc(struct saa7164_dev *dev)
 {
-	dprintk(1, "@0x%p busdesc sizeof(tmComResBusDescr_t) = %lu bytes\n",
-		&dev->busdesc, sizeof(tmComResBusDescr_t));
+	dprintk(1, "@0x%p busdesc sizeof(tmComResBusDescr_t) = %d bytes\n",
+		&dev->busdesc, (u32)sizeof(tmComResBusDescr_t));
 
 	dprintk(1, " .CommandRing   = 0x%016Lx\n", dev->busdesc.CommandRing);
 	dprintk(1, " .ResponseRing  = 0x%016Lx\n", dev->busdesc.ResponseRing);
@@ -359,15 +359,15 @@ static void saa7164_get_descriptors(struct saa7164_dev *dev)
 
 	if (dev->hwdesc.bLength != sizeof(tmComResHWDescr_t)) {
 		printk(KERN_ERR "Structure tmComResHWDescr_t is mangled\n");
-		printk(KERN_ERR "Need %x got %lu\n", dev->hwdesc.bLength,
-			sizeof(tmComResHWDescr_t));
+		printk(KERN_ERR "Need %x got %d\n", dev->hwdesc.bLength,
+			(u32)sizeof(tmComResHWDescr_t));
 	} else
 		saa7164_dump_hwdesc(dev);
 
 	if (dev->intfdesc.bLength != sizeof(tmComResInterfaceDescr_t)) {
 		printk(KERN_ERR "struct tmComResInterfaceDescr_t is mangled\n");
-		printk(KERN_ERR "Need %x got %lu\n", dev->intfdesc.bLength,
-			sizeof(tmComResInterfaceDescr_t));
+		printk(KERN_ERR "Need %x got %d\n", dev->intfdesc.bLength,
+			(u32)sizeof(tmComResInterfaceDescr_t));
 	} else
 		saa7164_dump_intfdesc(dev);
 
diff --git a/drivers/media/video/saa7164/saa7164-dvb.c b/drivers/media/video/saa7164/saa7164-dvb.c
index f21520f5979..271962db107 100644
--- a/drivers/media/video/saa7164/saa7164-dvb.c
+++ b/drivers/media/video/saa7164/saa7164-dvb.c
@@ -151,7 +151,7 @@ static int saa7164_dvb_cfg_tsport(struct saa7164_tsport *port)
 	saa7164_writel(port->bufsize, params->pitch * params->numberoflines);
 
 	dprintk(DBGLVL_DVB, " configured:\n");
-	dprintk(DBGLVL_DVB, "   lmmio       0x%llx\n", (u64)dev->lmmio);
+	dprintk(DBGLVL_DVB, "   lmmio       0x%p\n", dev->lmmio);
 	dprintk(DBGLVL_DVB, "   bufcounter  0x%x = 0x%x\n", port->bufcounter,
 		saa7164_readl(port->bufcounter));
 
@@ -178,13 +178,13 @@ static int saa7164_dvb_cfg_tsport(struct saa7164_tsport *port)
 		saa7164_writel(port->bufptr32l + ((sizeof(u32) * 2) * i), 0);
 
 		dprintk(DBGLVL_DVB,
-			"   buf[%d] offset 0x%lx (0x%x) "
-			"buf 0x%lx/%lx (0x%x/%x)\n",
+			"   buf[%d] offset 0x%llx (0x%x) "
+			"buf 0x%llx/%llx (0x%x/%x)\n",
 			i,
-			port->bufoffset + (i * sizeof(u32)),
+			(u64)port->bufoffset + (i * sizeof(u32)),
 			saa7164_readl(port->bufoffset + (sizeof(u32) * i)),
-			port->bufptr32h + ((sizeof(u32) * 2) * i),
-			port->bufptr32l + ((sizeof(u32) * 2) * i),
+			(u64)port->bufptr32h + ((sizeof(u32) * 2) * i),
+			(u64)port->bufptr32l + ((sizeof(u32) * 2) * i),
 			saa7164_readl(port->bufptr32h + ((sizeof(u32) * i)
 				* 2)),
 			saa7164_readl(port->bufptr32l + ((sizeof(u32) * i)
diff --git a/drivers/media/video/saa7164/saa7164.h b/drivers/media/video/saa7164/saa7164.h
index ed38118ffde..338804f6cd5 100644
--- a/drivers/media/video/saa7164/saa7164.h
+++ b/drivers/media/video/saa7164/saa7164.h
@@ -390,11 +390,8 @@ extern unsigned int debug;
 	} while (0)
 
 #define saa7164_readl(reg) readl(dev->lmmio + ((reg) >> 2))
-#define saa7164_writel(reg, value) \
-do { \
-	printk(KERN_ERR "writel(%x, %llx)\n", value, (u64)(dev->lmmio + ((reg) >> 2))); \
-	writel((value), dev->lmmio + ((reg) >> 2)); \
-} while (0)
+#define saa7164_writel(reg, value) writel((value), dev->lmmio + ((reg) >> 2))
+
 
 #define saa7164_readb(reg)             readl(dev->bmmio + (reg))
 #define saa7164_writeb(reg, value)     writel((value), dev->bmmio + (reg))
-- 
cgit v1.2.3


From 7aa2e795f2e3d9a7787641162d39725f44e62189 Mon Sep 17 00:00:00 2001
From: Steven Toth <stoth@kernellabs.com>
Date: Sun, 10 May 2009 10:25:34 -0300
Subject: V4L/DVB (12925): SAA7164: Adjust I/F's to the TDA10048 enabling DVB-T
 lock

SAA7164: Adjust I/F's to the TDA10048 enabling DVB-T lock

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7164/saa7164-dvb.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7164/saa7164-dvb.c b/drivers/media/video/saa7164/saa7164-dvb.c
index 271962db107..e9ff88a11a1 100644
--- a/drivers/media/video/saa7164/saa7164-dvb.c
+++ b/drivers/media/video/saa7164/saa7164-dvb.c
@@ -34,13 +34,17 @@ static struct tda10048_config hauppauge_hvr2200_1_config = {
 	.demod_address    = 0x10 >> 1,
 	.output_mode      = TDA10048_SERIAL_OUTPUT,
 	.fwbulkwritelen   = TDA10048_BULKWRITE_200,
-	.inversion        = TDA10048_INVERSION_ON
+	.inversion        = TDA10048_INVERSION_ON,
+	.if_freq_khz      = TDA10048_IF_4000,
+	.clk_freq_khz     = TDA10048_CLK_16000,
 };
 static struct tda10048_config hauppauge_hvr2200_2_config = {
 	.demod_address    = 0x12 >> 1,
 	.output_mode      = TDA10048_SERIAL_OUTPUT,
 	.fwbulkwritelen   = TDA10048_BULKWRITE_200,
-	.inversion        = TDA10048_INVERSION_ON
+	.inversion        = TDA10048_INVERSION_ON,
+	.if_freq_khz      = TDA10048_IF_4000,
+	.clk_freq_khz     = TDA10048_CLK_16000,
 };
 
 static struct tda18271_std_map hauppauge_tda18271_std_map = {
-- 
cgit v1.2.3


From 9d119c3314cd7ad251e1e2c97b4e081d870a31f7 Mon Sep 17 00:00:00 2001
From: Steven Toth <stoth@kernellabs.com>
Date: Sun, 10 May 2009 11:17:58 -0300
Subject: V4L/DVB (12926): SAA7164: Email address change

SAA7164: Email address change

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7164/saa7164-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7164/saa7164-core.c b/drivers/media/video/saa7164/saa7164-core.c
index 4b155a3d6c1..bf4ca4f29b0 100644
--- a/drivers/media/video/saa7164/saa7164-core.c
+++ b/drivers/media/video/saa7164/saa7164-core.c
@@ -33,7 +33,7 @@
 #include "saa7164.h"
 
 MODULE_DESCRIPTION("Driver for NXP SAA7164 based TV cards");
-MODULE_AUTHOR("Steven Toth <stoth@hauppauge.com>");
+MODULE_AUTHOR("Steven Toth <stoth@kernellabs.com>");
 MODULE_LICENSE("GPL");
 
 /*
-- 
cgit v1.2.3


From 1a6450d4d43a4d4caecaa3ca7796cbe8c7cfbba3 Mon Sep 17 00:00:00 2001
From: Steven Toth <stoth@kernellabs.com>
Date: Sun, 10 May 2009 14:08:27 -0300
Subject: V4L/DVB (12927): SAA7164: Remove volatiles for PCI writes (coding
 style violation)

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7164/saa7164-bus.c  |  2 +-
 drivers/media/video/saa7164/saa7164-core.c | 12 ++++++------
 drivers/media/video/saa7164/saa7164.h      |  6 +++---
 3 files changed, 10 insertions(+), 10 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7164/saa7164-bus.c b/drivers/media/video/saa7164/saa7164-bus.c
index 8d813f5b54a..83a04640a25 100644
--- a/drivers/media/video/saa7164/saa7164-bus.c
+++ b/drivers/media/video/saa7164/saa7164-bus.c
@@ -257,7 +257,7 @@ int saa7164_bus_set(struct saa7164_dev *dev, tmComResInfo_t* msg, void *buf)
 
 	dprintk(DBGLVL_BUS, "%s() new_swp = %x\n", __func__, new_swp);
 
-	/* TODO: Convert all of the volatiles and direct PCI writes into
+	/* TODO: Convert all of the direct PCI writes into
 	 * saa7164_writel/b calls for consistency.
 	 */
 
diff --git a/drivers/media/video/saa7164/saa7164-core.c b/drivers/media/video/saa7164/saa7164-core.c
index bf4ca4f29b0..968ecd4ad49 100644
--- a/drivers/media/video/saa7164/saa7164-core.c
+++ b/drivers/media/video/saa7164/saa7164-core.c
@@ -126,12 +126,13 @@ static irqreturn_t saa7164_irq(int irq, void *dev_id)
 	/* Check that the hardware is accessable. If the status bytes are
 	 * 0xFF then the device is not accessable, the the IRQ belongs
 	 * to another driver.
+	 * 4 x u32 interrupt registers.
 	 */
 	for (i = 0; i < INT_SIZE/4; i++) {
 
 		/* TODO: Convert into saa7164_readl() */
 		/* Read the 4 hardware interrupt registers */
-		intstat[i] = *(dev->InterruptStatus + i);
+		intstat[i] = saa7164_readl(dev->int_status + (i * 4));
 
 		if (intstat[i] != 0xffffffff)
 			hwacc = 1;
@@ -184,9 +185,8 @@ static irqreturn_t saa7164_irq(int irq, void *dev_id)
 				}
 			}
 
-			/* TODO: Convert into saa7164_writel() */
 			/* Ack it */
-			*(dev->InterruptAck + i) = intstat[i];
+			saa7164_writel(dev->int_ack + (i * 4), intstat[i]);
 
 		}
 	}
@@ -487,9 +487,9 @@ static int saa7164_dev_setup(struct saa7164_dev *dev)
 	printk(KERN_INFO "CORE %s: dev->bmmio2 = 0x%p\n", dev->name,
 		dev->bmmio2);
 
-	/* TODO: Magic defines used in the windows driver, define these */
-	dev->InterruptStatus = (u32 *)(dev->bmmio + 0x183000 + 0xf80);
-	dev->InterruptAck = (u32 *)(dev->bmmio + 0x183000 + 0xf90);
+	/* Inerrupt and ack register locations offset of bmmio */
+	dev->int_status = 0x183000 + 0xf80;
+	dev->int_ack = 0x183000 + 0xf90;
 
 	printk(KERN_INFO
 		"CORE %s: subsystem: %04x:%04x, board: %s [card=%d,%s]\n",
diff --git a/drivers/media/video/saa7164/saa7164.h b/drivers/media/video/saa7164/saa7164.h
index 338804f6cd5..2d4d47ba3c1 100644
--- a/drivers/media/video/saa7164/saa7164.h
+++ b/drivers/media/video/saa7164/saa7164.h
@@ -274,9 +274,9 @@ struct saa7164_dev {
 
 	tmComResBusInfo_t		bus;
 
-	/* TODO: Urgh, remove volatiles */
-	volatile u32			*InterruptStatus;
-	volatile u32			*InterruptAck;
+	/* Interrupt status and ack registers */
+	u32 int_status;
+	u32 int_ack;
 
 	struct cmd			cmds[SAA_CMD_MAX_MSG_UNITS];
 	struct mutex			lock;
-- 
cgit v1.2.3


From f4a6adf1e54324756917459c52ec7bfdc28d6e7f Mon Sep 17 00:00:00 2001
From: Steven Toth <stoth@kernellabs.com>
Date: Mon, 11 May 2009 20:42:03 -0300
Subject: V4L/DVB (12928): SAA7164: Increase firmware load tolerance

It's timing out and aborting firmware load too quickly on some
platforms, this increases the upper limit.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7164/saa7164-fw.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7164/saa7164-fw.c b/drivers/media/video/saa7164/saa7164-fw.c
index 6595dd67c5c..ee0af3534ed 100644
--- a/drivers/media/video/saa7164/saa7164-fw.c
+++ b/drivers/media/video/saa7164/saa7164-fw.c
@@ -40,14 +40,13 @@ int saa7164_dl_wait_ack(struct saa7164_dev *dev, u32 reg)
 {
 	u32 timeout = SAA_DEVICE_TIMEOUT;
 	while ((saa7164_readl(reg) & 0x01) == 0) {
-		timeout -= 5;
+		timeout -= 10;
 		if (timeout == 0) {
 			printk(KERN_ERR "%s() timeout (no d/l ack)\n",
 				__func__);
 			return -EBUSY;
 		}
-		/* TODO: Review this for efficiency, f/w load is slow */
-		msleep(1);
+		msleep(100);
 	}
 
 	return 0;
@@ -57,14 +56,13 @@ int saa7164_dl_wait_clr(struct saa7164_dev *dev, u32 reg)
 {
 	u32 timeout = SAA_DEVICE_TIMEOUT;
 	while (saa7164_readl(reg) & 0x01) {
-		timeout -= 5;
+		timeout -= 10;
 		if (timeout == 0) {
 			printk(KERN_ERR "%s() timeout (no d/l clr)\n",
 				__func__);
 			return -EBUSY;
 		}
-		/* TODO: Review this for efficiency, f/w load is slow */
-		msleep(1);
+		msleep(100);
 	}
 
 	return 0;
-- 
cgit v1.2.3


From d888ea03a0a8798e5a7632d0808cd69f577b75c5 Mon Sep 17 00:00:00 2001
From: Steven Toth <stoth@kernellabs.com>
Date: Mon, 11 May 2009 22:16:05 -0300
Subject: V4L/DVB (12929): SAA7164: OOPS avoidance during interrupt handling

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7164/saa7164-core.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7164/saa7164-core.c b/drivers/media/video/saa7164/saa7164-core.c
index 968ecd4ad49..15ea90731ba 100644
--- a/drivers/media/video/saa7164/saa7164-core.c
+++ b/drivers/media/video/saa7164/saa7164-core.c
@@ -123,6 +123,12 @@ static irqreturn_t saa7164_irq(int irq, void *dev_id)
 	u32 intstat[INT_SIZE/4];
 	int i, handled = 0, bit;
 
+	if (dev == 0) {
+		printk(KERN_ERR "%s() No device specified\n", __func__);
+		handled = 0;
+		goto out;
+	}
+
 	/* Check that the hardware is accessable. If the status bytes are
 	 * 0xFF then the device is not accessable, the the IRQ belongs
 	 * to another driver.
-- 
cgit v1.2.3


From 78d155693a741f19ab514393a6c4b2da7be9f2ce Mon Sep 17 00:00:00 2001
From: Steven Toth <stoth@kernellabs.com>
Date: Tue, 12 May 2009 10:13:11 -0300
Subject: V4L/DVB (12930): SAA7164: Removed spurious I2C errors during driver
 load with DVB-T boards.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7164/saa7164-api.c  | 19 -------------------
 drivers/media/video/saa7164/saa7164-core.c |  3 ---
 drivers/media/video/saa7164/saa7164.h      |  1 -
 3 files changed, 23 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7164/saa7164-api.c b/drivers/media/video/saa7164/saa7164-api.c
index 105b68ef61e..bb6df1b276b 100644
--- a/drivers/media/video/saa7164/saa7164-api.c
+++ b/drivers/media/video/saa7164/saa7164-api.c
@@ -60,25 +60,6 @@ int saa7164_api_read_eeprom(struct saa7164_dev *dev, u8 *buf, int buflen)
 		&reg[0], 128, buf);
 }
 
-/*  Exercise the i2c interface, saa7164_cmd()/bus() layers:
- *  1. Read the identity byte from each of the demodulators.
- *  2. Read the entire register set from the TDA18271.
- *  TODO: This function has no purpose other than to exercise i2c.
- */
-int saa7164_api_test(struct saa7164_dev *dev)
-{
-	/* TDA10048 identities */
-	u8 reg[] = { 0x00 };
-	u8 data[256];
-	dprintk(DBGLVL_API, "%s()\n", __func__);
-	/* Read all 39 bytes from the TDA18271 tuners */
-	saa7164_api_i2c_read(&dev->i2c_bus[1], 0xc0 >> 1, 0,
-		&reg[0], 39, &data[0]);
-	saa7164_api_i2c_read(&dev->i2c_bus[2], 0xc0 >> 1, 0,
-		&reg[0], 39, &data[0]);
-
-	return 0;
-}
 
 int saa7164_api_configure_port_mpeg2ts(struct saa7164_dev *dev,
 	struct saa7164_tsport *port,
diff --git a/drivers/media/video/saa7164/saa7164-core.c b/drivers/media/video/saa7164/saa7164-core.c
index 15ea90731ba..0f3ebcdef12 100644
--- a/drivers/media/video/saa7164/saa7164-core.c
+++ b/drivers/media/video/saa7164/saa7164-core.c
@@ -644,9 +644,6 @@ static int __devinit saa7164_initdev(struct pci_dev *pci_dev,
 		 */
 		saa7164_api_enum_subdevs(dev);
 
-		/* Try a few API commands - just for exercise purposes */
-		saa7164_api_test(dev);
-
 		/* Begin to create the video sub-systems and register funcs */
 		if (saa7164_boards[dev->board].porta == SAA7164_MPEG_DVB) {
 			if (saa7164_dvb_register(&dev->ts1) < 0) {
diff --git a/drivers/media/video/saa7164/saa7164.h b/drivers/media/video/saa7164/saa7164.h
index 2d4d47ba3c1..dd8991b2801 100644
--- a/drivers/media/video/saa7164/saa7164.h
+++ b/drivers/media/video/saa7164/saa7164.h
@@ -329,7 +329,6 @@ void saa7164_cmd_signal(struct saa7164_dev *dev, u8 seqno);
 
 /* ----------------------------------------------------------- */
 /* saa7164-api.c                                               */
-int saa7164_api_test(struct saa7164_dev *dev);
 int saa7164_api_get_fw_version(struct saa7164_dev *dev, u32 *version);
 int saa7164_api_enum_subdevs(struct saa7164_dev *dev);
 int saa7164_api_i2c_read(struct saa7164_i2c *bus, u8 addr, u32 reglen, u8 *reg,
-- 
cgit v1.2.3


From e333522225ac5c4f37ea49c12724e6c67d896214 Mon Sep 17 00:00:00 2001
From: Steven Toth <stoth@kernellabs.com>
Date: Mon, 11 May 2009 22:03:07 -0300
Subject: V4L/DVB (12931): SAA7164: Fix the 88021 definition to work with
 production boards.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7164/saa7164-cards.c | 61 ++++++++++++++++++++++++++++-
 drivers/media/video/saa7164/saa7164-dvb.c   |  1 +
 drivers/media/video/saa7164/saa7164.h       |  1 +
 3 files changed, 61 insertions(+), 2 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7164/saa7164-cards.c b/drivers/media/video/saa7164/saa7164-cards.c
index 0678b5f31bd..9274e1c2187 100644
--- a/drivers/media/video/saa7164/saa7164-cards.c
+++ b/drivers/media/video/saa7164/saa7164-cards.c
@@ -303,6 +303,62 @@ struct saa7164_board saa7164_boards[] = {
 			.i2c_reg_len	= REGLEN_8bit,
 		} },
 	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2250_3] = {
+		.name		= "Hauppauge WinTV-HVR2250",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.chiprev	= SAA7164_CHIP_REV3,
+		.unit		= {{
+			.id		= 0x22,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x07,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-1 (TOP)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x32 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x08,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-1 (QAM)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x34 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x22,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x24,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-2 (TOP)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x32 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x27,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-2 (QAM)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x34 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		} },
+	},
 };
 const unsigned int saa7164_bcount = ARRAY_SIZE(saa7164_boards);
 
@@ -333,7 +389,7 @@ struct saa7164_subid saa7164_subids[] = {
 	}, {
 		.subvendor = 0x0070,
 		.subdevice = 0x88A1,
-		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2250_2,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2250_3,
 	}, {
 		.subvendor = 0x0070,
 		.subdevice = 0x8891,
@@ -385,6 +441,7 @@ void saa7164_gpio_setup(struct saa7164_dev *dev)
 	case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2250:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:
 		/*
 		GPIO 2: s5h1411 / tda10048-1 demod reset
 		GPIO 3: s5h1411 / tda10048-2 demod reset
@@ -464,7 +521,7 @@ void saa7164_card_setup(struct saa7164_dev *dev)
 	case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2250:
-	case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:
 		hauppauge_eeprom(dev, &eeprom[0]);
 		break;
 	}
diff --git a/drivers/media/video/saa7164/saa7164-dvb.c b/drivers/media/video/saa7164/saa7164-dvb.c
index e9ff88a11a1..67e4f9d3d24 100644
--- a/drivers/media/video/saa7164/saa7164-dvb.c
+++ b/drivers/media/video/saa7164/saa7164-dvb.c
@@ -542,6 +542,7 @@ int saa7164_dvb_register(struct saa7164_tsport *port)
 		break;
 	case SAA7164_BOARD_HAUPPAUGE_HVR2250:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:
 		i2c_bus = &dev->i2c_bus[port->nr + 1];
 
 		port->dvb.frontend = dvb_attach(s5h1411_attach,
diff --git a/drivers/media/video/saa7164/saa7164.h b/drivers/media/video/saa7164/saa7164.h
index dd8991b2801..e0d8ec0fd95 100644
--- a/drivers/media/video/saa7164/saa7164.h
+++ b/drivers/media/video/saa7164/saa7164.h
@@ -72,6 +72,7 @@
 #define SAA7164_BOARD_HAUPPAUGE_HVR2200_2	5
 #define SAA7164_BOARD_HAUPPAUGE_HVR2200_3	6
 #define SAA7164_BOARD_HAUPPAUGE_HVR2250_2	7
+#define SAA7164_BOARD_HAUPPAUGE_HVR2250_3	8
 
 #define SAA7164_MAX_UNITS		8
 #define SAA7164_TS_NUMBER_OF_LINES	312
-- 
cgit v1.2.3


From c303e3e10a7aad1a54946dd060078224e3f1327d Mon Sep 17 00:00:00 2001
From: Steven Toth <stoth@kernellabs.com>
Date: Tue, 12 May 2009 16:20:37 -0300
Subject: V4L/DVB (12932): SAA7164: Fixed the missing eeprom parse on a
 specific board.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7164/saa7164-cards.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7164/saa7164-cards.c b/drivers/media/video/saa7164/saa7164-cards.c
index 9274e1c2187..27fa9242063 100644
--- a/drivers/media/video/saa7164/saa7164-cards.c
+++ b/drivers/media/video/saa7164/saa7164-cards.c
@@ -521,6 +521,7 @@ void saa7164_card_setup(struct saa7164_dev *dev)
 	case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2250:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:
 		hauppauge_eeprom(dev, &eeprom[0]);
 		break;
-- 
cgit v1.2.3


From 50bcb4aefe382df28031867e16a0a8d1dfb39c94 Mon Sep 17 00:00:00 2001
From: Steven Toth <stoth@kernellabs.com>
Date: Wed, 13 May 2009 02:53:08 -0300
Subject: V4L/DVB (12933): SAA7164: Fix IRQ related system hang when firmware
 is not found.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7164/saa7164-core.c | 29 +++++++++++++----------------
 1 file changed, 13 insertions(+), 16 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7164/saa7164-core.c b/drivers/media/video/saa7164/saa7164-core.c
index 0f3ebcdef12..2fbf4204cd5 100644
--- a/drivers/media/video/saa7164/saa7164-core.c
+++ b/drivers/media/video/saa7164/saa7164-core.c
@@ -119,8 +119,7 @@ static irqreturn_t saa7164_irq_ts(struct saa7164_tsport *port)
 static irqreturn_t saa7164_irq(int irq, void *dev_id)
 {
 	struct saa7164_dev *dev = dev_id;
-	u32 hwacc = 0, interruptid;
-	u32 intstat[INT_SIZE/4];
+	u32 intid, intstat[INT_SIZE/4];
 	int i, handled = 0, bit;
 
 	if (dev == 0) {
@@ -140,15 +139,11 @@ static irqreturn_t saa7164_irq(int irq, void *dev_id)
 		/* Read the 4 hardware interrupt registers */
 		intstat[i] = saa7164_readl(dev->int_status + (i * 4));
 
-		if (intstat[i] != 0xffffffff)
-			hwacc = 1;
+		if (intstat[i])
+			handled = 1;
 	}
-	if (hwacc == 0) {
-		handled = 0;
+	if (handled == 0)
 		goto out;
-	}
-
-	handled = 1;
 
 	/* For each of the HW interrupt registers */
 	for (i = 0; i < INT_SIZE/4; i++) {
@@ -165,17 +160,17 @@ static irqreturn_t saa7164_irq(int irq, void *dev_id)
 
 				/* Calculate the interrupt id (0x00 to 0x7f) */
 
-				interruptid = (i * 32) + bit;
-				if (interruptid == dev->intfdesc.bInterruptId) {
+				intid = (i * 32) + bit;
+				if (intid == dev->intfdesc.bInterruptId) {
 					/* A response to an cmd/api call */
 					schedule_work(&dev->workcmd);
-				} else if (interruptid ==
+				} else if (intid ==
 					dev->ts1.hwcfg.interruptid) {
 
 					/* Transport path 1 */
 					saa7164_irq_ts(&dev->ts1);
 
-				} else if (interruptid ==
+				} else if (intid ==
 					dev->ts2.hwcfg.interruptid) {
 
 					/* Transport path 2 */
@@ -187,7 +182,7 @@ static irqreturn_t saa7164_irq(int irq, void *dev_id)
 						"%s() unhandled interrupt "
 						"reg 0x%x bit 0x%x "
 						"intid = 0x%x\n",
-						__func__, i, bit, interruptid);
+						__func__, i, bit, intid);
 				}
 			}
 
@@ -598,8 +593,9 @@ static int __devinit saa7164_initdev(struct pci_dev *pci_dev,
 		err = saa7164_downloadfirmware(dev);
 		if (err < 0) {
 			printk(KERN_ERR
-				"Failed to boot firmware, cannot continue\n");
-			goto fail_irq;
+				"Failed to boot firmware, no features "
+				"registered\n");
+			goto fail_fw;
 		}
 
 		saa7164_get_descriptors(dev);
@@ -666,6 +662,7 @@ static int __devinit saa7164_initdev(struct pci_dev *pci_dev,
 		printk(KERN_ERR "%s() Unsupported board detected, "
 			"registering without firmware\n", __func__);
 
+fail_fw:
 	return 0;
 
 fail_irq:
-- 
cgit v1.2.3


From 30015c1ed77560aa4466802bcf48b0ccdb13f3bc Mon Sep 17 00:00:00 2001
From: Steven Toth <stoth@kernellabs.com>
Date: Thu, 14 May 2009 01:15:15 -0300
Subject: V4L/DVB (12934): SAA7164: Fix i2c eeprom read errors during load
 (some boards).

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7164/saa7164-cards.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7164/saa7164-cards.c b/drivers/media/video/saa7164/saa7164-cards.c
index 27fa9242063..c936604e622 100644
--- a/drivers/media/video/saa7164/saa7164-cards.c
+++ b/drivers/media/video/saa7164/saa7164-cards.c
@@ -57,7 +57,7 @@ struct saa7164_board saa7164_boards[] = {
 		.portb		= SAA7164_MPEG_DVB,
 		.chiprev	= SAA7164_CHIP_REV3,
 		.unit		= {{
-			.id		= 0x06,
+			.id		= 0x1d,
 			.type		= SAA7164_UNIT_EEPROM,
 			.name		= "4K EEPROM",
 			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
@@ -141,7 +141,7 @@ struct saa7164_board saa7164_boards[] = {
 		.portb		= SAA7164_MPEG_DVB,
 		.chiprev	= SAA7164_CHIP_REV2,
 		.unit		= {{
-			.id		= 0x06,
+			.id		= 0x1d,
 			.type		= SAA7164_UNIT_EEPROM,
 			.name		= "4K EEPROM",
 			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
@@ -253,7 +253,7 @@ struct saa7164_board saa7164_boards[] = {
 		.portb		= SAA7164_MPEG_DVB,
 		.chiprev	= SAA7164_CHIP_REV3,
 		.unit		= {{
-			.id		= 0x22,
+			.id		= 0x28,
 			.type		= SAA7164_UNIT_EEPROM,
 			.name		= "4K EEPROM",
 			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
@@ -309,7 +309,7 @@ struct saa7164_board saa7164_boards[] = {
 		.portb		= SAA7164_MPEG_DVB,
 		.chiprev	= SAA7164_CHIP_REV3,
 		.unit		= {{
-			.id		= 0x22,
+			.id		= 0x26,
 			.type		= SAA7164_UNIT_EEPROM,
 			.name		= "4K EEPROM",
 			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
-- 
cgit v1.2.3


From 3224401e4c6154bf556d669ed36743cc9a38ffad Mon Sep 17 00:00:00 2001
From: Steven Toth <stoth@kernellabs.com>
Date: Fri, 15 May 2009 21:13:32 -0300
Subject: V4L/DVB (12935): SAA7164: Ensure we specify I/F's for all bandwidths

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7164/saa7164-dvb.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7164/saa7164-dvb.c b/drivers/media/video/saa7164/saa7164-dvb.c
index 67e4f9d3d24..258eab562f4 100644
--- a/drivers/media/video/saa7164/saa7164-dvb.c
+++ b/drivers/media/video/saa7164/saa7164-dvb.c
@@ -35,7 +35,9 @@ static struct tda10048_config hauppauge_hvr2200_1_config = {
 	.output_mode      = TDA10048_SERIAL_OUTPUT,
 	.fwbulkwritelen   = TDA10048_BULKWRITE_200,
 	.inversion        = TDA10048_INVERSION_ON,
-	.if_freq_khz      = TDA10048_IF_4000,
+	.dtv6_if_freq_khz = TDA10048_IF_3300,
+	.dtv7_if_freq_khz = TDA10048_IF_3500,
+	.dtv8_if_freq_khz = TDA10048_IF_4000,
 	.clk_freq_khz     = TDA10048_CLK_16000,
 };
 static struct tda10048_config hauppauge_hvr2200_2_config = {
@@ -43,7 +45,9 @@ static struct tda10048_config hauppauge_hvr2200_2_config = {
 	.output_mode      = TDA10048_SERIAL_OUTPUT,
 	.fwbulkwritelen   = TDA10048_BULKWRITE_200,
 	.inversion        = TDA10048_INVERSION_ON,
-	.if_freq_khz      = TDA10048_IF_4000,
+	.dtv6_if_freq_khz = TDA10048_IF_3300,
+	.dtv7_if_freq_khz = TDA10048_IF_3500,
+	.dtv8_if_freq_khz = TDA10048_IF_4000,
 	.clk_freq_khz     = TDA10048_CLK_16000,
 };
 
-- 
cgit v1.2.3


From dd1ee4442d14f90d4da6b8a2ee37ab922100f250 Mon Sep 17 00:00:00 2001
From: Steven Toth <stoth@kernellabs.com>
Date: Thu, 30 Jul 2009 09:09:30 -0300
Subject: V4L/DVB (12936): SAA7164: Added waitsecs module parameter

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7164/saa7164-cmd.c  | 4 ++--
 drivers/media/video/saa7164/saa7164-core.c | 5 +++++
 drivers/media/video/saa7164/saa7164.h      | 1 +
 3 files changed, 8 insertions(+), 2 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7164/saa7164-cmd.c b/drivers/media/video/saa7164/saa7164-cmd.c
index 0c3585bb232..171ef116f07 100644
--- a/drivers/media/video/saa7164/saa7164-cmd.c
+++ b/drivers/media/video/saa7164/saa7164-cmd.c
@@ -234,8 +234,8 @@ int saa7164_cmd_wait(struct saa7164_dev *dev, u8 seqno)
 				__func__, seqno, dev->cmds[seqno].signalled);
 
 			/* Wait for signalled to be flagged or timeout */
-			wait_event_timeout(*q, dev->cmds[seqno].signalled, HZ);
-			r = time_before(jiffies, stamp + HZ);
+			wait_event_timeout(*q, dev->cmds[seqno].signalled, (HZ * waitsecs));
+			r = time_before(jiffies, stamp + (HZ * waitsecs));
 			if (r)
 				ret = SAA_OK;
 			else
diff --git a/drivers/media/video/saa7164/saa7164-core.c b/drivers/media/video/saa7164/saa7164-core.c
index 2fbf4204cd5..8f68a5d6533 100644
--- a/drivers/media/video/saa7164/saa7164-core.c
+++ b/drivers/media/video/saa7164/saa7164-core.c
@@ -49,6 +49,10 @@ unsigned int debug;
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "enable debug messages");
 
+unsigned int waitsecs = 1;
+module_param(waitsecs, int, 0644);
+MODULE_PARM_DESC(debug, "timeout on firmware messages");
+
 static unsigned int card[]  = {[0 ... (SAA7164_MAXBOARDS - 1)] = UNSET };
 module_param_array(card,  int, NULL, 0444);
 MODULE_PARM_DESC(card, "card type");
@@ -662,6 +666,7 @@ static int __devinit saa7164_initdev(struct pci_dev *pci_dev,
 		printk(KERN_ERR "%s() Unsupported board detected, "
 			"registering without firmware\n", __func__);
 
+	printk(KERN_INFO "%s() waitsecs = %d\n", __func__, waitsecs);
 fail_fw:
 	return 0;
 
diff --git a/drivers/media/video/saa7164/saa7164.h b/drivers/media/video/saa7164/saa7164.h
index e0d8ec0fd95..93a75e15d21 100644
--- a/drivers/media/video/saa7164/saa7164.h
+++ b/drivers/media/video/saa7164/saa7164.h
@@ -294,6 +294,7 @@ struct saa7164_dev {
 };
 
 extern struct list_head saa7164_devlist;
+extern unsigned int waitsecs;
 
 /* ----------------------------------------------------------- */
 /* saa7164-core.c                                              */
-- 
cgit v1.2.3


From 2ceae8fdfa55475ef8d7cb9bcaf3fd242ea1edcc Mon Sep 17 00:00:00 2001
From: Steven Toth <stoth@kernellabs.com>
Date: Sat, 8 Aug 2009 10:13:51 -0300
Subject: V4L/DVB (12937): SAA7164: Cleanup a printk

Cleanup a printk and output two helpful driver params in debug mode.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7164/saa7164-core.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7164/saa7164-core.c b/drivers/media/video/saa7164/saa7164-core.c
index 8f68a5d6533..06dab7cbcaa 100644
--- a/drivers/media/video/saa7164/saa7164-core.c
+++ b/drivers/media/video/saa7164/saa7164-core.c
@@ -666,7 +666,9 @@ static int __devinit saa7164_initdev(struct pci_dev *pci_dev,
 		printk(KERN_ERR "%s() Unsupported board detected, "
 			"registering without firmware\n", __func__);
 
-	printk(KERN_INFO "%s() waitsecs = %d\n", __func__, waitsecs);
+	dprintk(1, "%s() parameter debug = %d\n", __func__, debug);
+	dprintk(1, "%s() parameter waitsecs = %d\n", __func__, waitsecs);
+
 fail_fw:
 	return 0;
 
-- 
cgit v1.2.3


From bbf504c37ddced9957fa65aac9a213f322871b07 Mon Sep 17 00:00:00 2001
From: Steven Toth <stoth@kernellabs.com>
Date: Sat, 8 Aug 2009 10:22:02 -0300
Subject: V4L/DVB (12938): SAA7164: Increase the firmware command timeout to
 avoid firmware errors.

The firmware typically responds in < 50ms and, via the interrupts and
deferred work queue the caller (blocked in the driver) is signalled very
efficiently. In a highly stressed system this can take many multiples
of seconds. So, we need a larger maximum timeout for busy systems.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7164/saa7164-cmd.c  | 6 ++++++
 drivers/media/video/saa7164/saa7164-core.c | 2 +-
 2 files changed, 7 insertions(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7164/saa7164-cmd.c b/drivers/media/video/saa7164/saa7164-cmd.c
index 171ef116f07..cd3af4d4364 100644
--- a/drivers/media/video/saa7164/saa7164-cmd.c
+++ b/drivers/media/video/saa7164/saa7164-cmd.c
@@ -234,6 +234,12 @@ int saa7164_cmd_wait(struct saa7164_dev *dev, u8 seqno)
 				__func__, seqno, dev->cmds[seqno].signalled);
 
 			/* Wait for signalled to be flagged or timeout */
+			/* In a highly stressed system this can easily extend
+			 * into multiple seconds before the deferred worker
+			 * is scheduled, and we're woken up via signal.
+			 * We typically are signalled in < 50ms but it can
+			 * take MUCH longer.
+			 */
 			wait_event_timeout(*q, dev->cmds[seqno].signalled, (HZ * waitsecs));
 			r = time_before(jiffies, stamp + (HZ * waitsecs));
 			if (r)
diff --git a/drivers/media/video/saa7164/saa7164-core.c b/drivers/media/video/saa7164/saa7164-core.c
index 06dab7cbcaa..da6dbe57962 100644
--- a/drivers/media/video/saa7164/saa7164-core.c
+++ b/drivers/media/video/saa7164/saa7164-core.c
@@ -49,7 +49,7 @@ unsigned int debug;
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "enable debug messages");
 
-unsigned int waitsecs = 1;
+unsigned int waitsecs = 10;
 module_param(waitsecs, int, 0644);
 MODULE_PARM_DESC(debug, "timeout on firmware messages");
 
-- 
cgit v1.2.3


From 068ed40b8fc14cd3d16b5cf2db59ecd735a68ca8 Mon Sep 17 00:00:00 2001
From: Steven Toth <stoth@kernellabs.com>
Date: Wed, 12 Aug 2009 12:06:27 -0300
Subject: V4L/DVB (12939): SAA7164: Removed a duplicate call to address any PCI
 quirks.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7164/saa7164-core.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7164/saa7164-core.c b/drivers/media/video/saa7164/saa7164-core.c
index da6dbe57962..3753b52e029 100644
--- a/drivers/media/video/saa7164/saa7164-core.c
+++ b/drivers/media/video/saa7164/saa7164-core.c
@@ -578,8 +578,6 @@ static int __devinit saa7164_initdev(struct pci_dev *pci_dev,
 
 	pci_set_drvdata(pci_dev, dev);
 
-	saa7164_pci_quirks(dev);
-
 	/* Init the internal command list */
 	for (i = 0; i < SAA_CMD_MAX_MSG_UNITS; i++) {
 		dev->cmds[i].seqno = i;
-- 
cgit v1.2.3


From 39e469ab6dee0977a6fb632c711fba1ec5fca401 Mon Sep 17 00:00:00 2001
From: Steven Toth <stoth@kernellabs.com>
Date: Wed, 12 Aug 2009 12:14:37 -0300
Subject: V4L/DVB (12940): SAA7164: IRQ / message timeout related change

In some cases we're seeing large timeouts on commands. I'm changing the
implementation so that the deferred worker checks the PCI bus for
any messages and signals the waiting caller accordingly. The previous
mechanism was too unreliable.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7164/saa7164-cmd.c  | 37 ++++++++++++++++++++++++++++++
 drivers/media/video/saa7164/saa7164-core.c |  2 +-
 drivers/media/video/saa7164/saa7164.h      |  1 +
 3 files changed, 39 insertions(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7164/saa7164-cmd.c b/drivers/media/video/saa7164/saa7164-cmd.c
index cd3af4d4364..e097f1a0969 100644
--- a/drivers/media/video/saa7164/saa7164-cmd.c
+++ b/drivers/media/video/saa7164/saa7164-cmd.c
@@ -78,6 +78,43 @@ u32 saa7164_cmd_timeout_get(struct saa7164_dev *dev, u8 seqno)
 	return ret;
 }
 
+/* Commands to the f/w get marshelled to/from this code then onto the PCI
+ * -bus/c running buffer. */
+int saa7164_irq_dequeue(struct saa7164_dev *dev)
+{
+	int ret = SAA_OK;
+	u32 timeout;
+	wait_queue_head_t *q = 0;
+	dprintk(DBGLVL_CMD, "%s()\n", __func__);
+
+	/* While any outstand message on the bus exists... */
+	do {
+
+		/* Peek the msg bus */
+		tmComResInfo_t tRsp = { 0, 0, 0, 0, 0, 0 };
+		ret = saa7164_bus_get(dev, &tRsp, NULL, 1);
+		if (ret != SAA_OK)
+			break;
+
+		q = &dev->cmds[tRsp.seqno].wait;
+		timeout = saa7164_cmd_timeout_get(dev, tRsp.seqno);
+		dprintk(DBGLVL_CMD, "%s() timeout = %d\n", __func__, timeout);
+		if (!timeout) {
+			dprintk(DBGLVL_CMD,
+				"%s() signalled seqno(%d) (for dequeue)\n",
+				__func__, tRsp.seqno);
+			dev->cmds[tRsp.seqno].signalled = 1;
+			wake_up(q);
+		} else {
+			printk(KERN_ERR
+				"%s() found timed out command on the bus\n",
+					__func__);
+		}
+	} while (0);
+
+	return ret;
+}
+
 /* Commands to the f/w get marshelled to/from this code then onto the PCI
  * -bus/c running buffer. */
 int saa7164_cmd_dequeue(struct saa7164_dev *dev)
diff --git a/drivers/media/video/saa7164/saa7164-core.c b/drivers/media/video/saa7164/saa7164-core.c
index 3753b52e029..e878fbcbb1e 100644
--- a/drivers/media/video/saa7164/saa7164-core.c
+++ b/drivers/media/video/saa7164/saa7164-core.c
@@ -69,7 +69,7 @@ static void saa7164_work_cmdhandler(struct work_struct *w)
 	struct saa7164_dev *dev = container_of(w, struct saa7164_dev, workcmd);
 
 	/* Wake up any complete commands */
-	saa7164_cmd_signal(dev, 0);
+	saa7164_irq_dequeue(dev);
 }
 
 static void saa7164_buffer_deliver(struct saa7164_buffer *buf)
diff --git a/drivers/media/video/saa7164/saa7164.h b/drivers/media/video/saa7164/saa7164.h
index 93a75e15d21..6753008a9c9 100644
--- a/drivers/media/video/saa7164/saa7164.h
+++ b/drivers/media/video/saa7164/saa7164.h
@@ -328,6 +328,7 @@ int saa7164_cmd_send(struct saa7164_dev *dev,
 	u8 id, tmComResCmd_t command, u16 controlselector,
 	u16 size, void *buf);
 void saa7164_cmd_signal(struct saa7164_dev *dev, u8 seqno);
+int saa7164_irq_dequeue(struct saa7164_dev *dev);
 
 /* ----------------------------------------------------------- */
 /* saa7164-api.c                                               */
-- 
cgit v1.2.3


From c64b2f78b7912bad38a73bf892fb6d0da4673c67 Mon Sep 17 00:00:00 2001
From: Steven Toth <stoth@kernellabs.com>
Date: Wed, 12 Aug 2009 21:12:32 -0300
Subject: V4L/DVB (12941): SAA7164: Removed spurious debug

SAA7164: Removed spurious debug

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7164/saa7164-core.c | 11 -----------
 1 file changed, 11 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7164/saa7164-core.c b/drivers/media/video/saa7164/saa7164-core.c
index e878fbcbb1e..4e0df60d29c 100644
--- a/drivers/media/video/saa7164/saa7164-core.c
+++ b/drivers/media/video/saa7164/saa7164-core.c
@@ -478,19 +478,8 @@ static int saa7164_dev_setup(struct saa7164_dev *dev)
 	dev->lmmio2 = ioremap(pci_resource_start(dev->pci, 2),
 			     pci_resource_len(dev->pci, 2));
 
-	printk(KERN_INFO "CORE %s: dev->lmmio  = 0x%p\n", dev->name,
-		dev->lmmio);
-
-	printk(KERN_INFO "CORE %s: dev->lmmio2 = 0x%p\n", dev->name,
-		dev->lmmio2);
-
 	dev->bmmio = (u8 __iomem *)dev->lmmio;
 	dev->bmmio2 = (u8 __iomem *)dev->lmmio2;
-	printk(KERN_INFO "CORE %s: dev->bmmio  = 0x%p\n", dev->name,
-		dev->bmmio);
-
-	printk(KERN_INFO "CORE %s: dev->bmmio2 = 0x%p\n", dev->name,
-		dev->bmmio2);
 
 	/* Inerrupt and ack register locations offset of bmmio */
 	dev->int_status = 0x183000 + 0xf80;
-- 
cgit v1.2.3


From 90e801acb2134d905d98152a919128b9f56bbd33 Mon Sep 17 00:00:00 2001
From: Steven Toth <stoth@kernellabs.com>
Date: Thu, 27 Aug 2009 18:08:21 -0300
Subject: V4L/DVB (12942): SAA7164: HVR2250 changes related to attach time
 tuner configuration

Ensure that by default all tuners are set correctly to master/slave mode.
For all HVR2250's, ensure slave based tuners are caliberated during attach
to avoid locking problems on tuner# above channel 91.

HVR2200 tuner attach time to be reviewed in a future patch.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7164/saa7164-dvb.c | 24 ++++++++++++++++++++----
 1 file changed, 20 insertions(+), 4 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7164/saa7164-dvb.c b/drivers/media/video/saa7164/saa7164-dvb.c
index 258eab562f4..238efc9149b 100644
--- a/drivers/media/video/saa7164/saa7164-dvb.c
+++ b/drivers/media/video/saa7164/saa7164-dvb.c
@@ -61,6 +61,14 @@ static struct tda18271_std_map hauppauge_tda18271_std_map = {
 static struct tda18271_config hauppauge_hvr22x0_tuner_config = {
 	.std_map	= &hauppauge_tda18271_std_map,
 	.gate		= TDA18271_GATE_ANALOG,
+	.role		= TDA18271_MASTER,
+};
+
+static struct tda18271_config hauppauge_hvr22x0s_tuner_config = {
+	.std_map	= &hauppauge_tda18271_std_map,
+	.gate		= TDA18271_GATE_ANALOG,
+	.role		= TDA18271_SLAVE,
+	.rf_cal_on_startup = 1
 };
 
 static struct s5h1411_config hauppauge_s5h1411_config = {
@@ -554,10 +562,18 @@ int saa7164_dvb_register(struct saa7164_tsport *port)
 			&i2c_bus->i2c_adap);
 
 		if (port->dvb.frontend != NULL) {
-			/* TODO: addr is in the card struct */
-			dvb_attach(tda18271_attach, port->dvb.frontend,
-				0xc0 >> 1, &i2c_bus->i2c_adap,
-				&hauppauge_hvr22x0_tuner_config);
+			if (port->nr == 0) {
+				/* Master TDA18271 */
+				/* TODO: addr is in the card struct */
+				dvb_attach(tda18271_attach, port->dvb.frontend,
+					0xc0 >> 1, &i2c_bus->i2c_adap,
+					&hauppauge_hvr22x0_tuner_config);
+			} else {
+				/* Slave TDA18271 */
+				dvb_attach(tda18271_attach, port->dvb.frontend,
+					0xc0 >> 1, &i2c_bus->i2c_adap,
+					&hauppauge_hvr22x0s_tuner_config);
+			}
 		}
 
 		break;
-- 
cgit v1.2.3


From 1f8c40b44161d64fd127aa93e717576ae0d6e9d2 Mon Sep 17 00:00:00 2001
From: Steven Toth <stoth@kernellabs.com>
Date: Sat, 29 Aug 2009 14:22:05 -0300
Subject: V4L/DVB (12943): SAA7164: Add a warning about addr usage

SAA7164: Remove meaningless if'0 code

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7164/saa7164-dvb.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7164/saa7164-dvb.c b/drivers/media/video/saa7164/saa7164-dvb.c
index 238efc9149b..0e28b966856 100644
--- a/drivers/media/video/saa7164/saa7164-dvb.c
+++ b/drivers/media/video/saa7164/saa7164-dvb.c
@@ -530,6 +530,7 @@ int saa7164_dvb_register(struct saa7164_tsport *port)
 				&i2c_bus->i2c_adap);
 
 			if (port->dvb.frontend != NULL) {
+				/* TODO: addr is in the card struct */
 				dvb_attach(tda18271_attach, port->dvb.frontend,
 					0xc0 >> 1, &i2c_bus->i2c_adap,
 					&hauppauge_hvr22x0_tuner_config);
@@ -544,6 +545,7 @@ int saa7164_dvb_register(struct saa7164_tsport *port)
 				&i2c_bus->i2c_adap);
 
 			if (port->dvb.frontend != NULL) {
+				/* TODO: addr is in the card struct */
 				dvb_attach(tda18271_attach, port->dvb.frontend,
 					0xc0 >> 1, &i2c_bus->i2c_adap,
 					&hauppauge_hvr22x0_tuner_config);
-- 
cgit v1.2.3


From 8bfd4b290ac28752234bce8febe96497b389cc3e Mon Sep 17 00:00:00 2001
From: Steven Toth <stoth@kernellabs.com>
Date: Sat, 29 Aug 2009 14:33:06 -0300
Subject: V4L/DVB (12944): SAA7164: Minor i2c assignment cleanup

SAA7164: Minor i2c assignment cleanup

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7164/saa7164-dvb.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7164/saa7164-dvb.c b/drivers/media/video/saa7164/saa7164-dvb.c
index 0e28b966856..c78c73ab47d 100644
--- a/drivers/media/video/saa7164/saa7164-dvb.c
+++ b/drivers/media/video/saa7164/saa7164-dvb.c
@@ -521,10 +521,9 @@ int saa7164_dvb_register(struct saa7164_tsport *port)
 	case SAA7164_BOARD_HAUPPAUGE_HVR2200:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
+		i2c_bus = &dev->i2c_bus[port->nr + 1];
 		switch (port->nr) {
 		case 0:
-			i2c_bus = &dev->i2c_bus[1];
-
 			port->dvb.frontend = dvb_attach(tda10048_attach,
 				&hauppauge_hvr2200_1_config,
 				&i2c_bus->i2c_adap);
@@ -538,8 +537,6 @@ int saa7164_dvb_register(struct saa7164_tsport *port)
 
 			break;
 		case 1:
-			i2c_bus = &dev->i2c_bus[2];
-
 			port->dvb.frontend = dvb_attach(tda10048_attach,
 				&hauppauge_hvr2200_2_config,
 				&i2c_bus->i2c_adap);
-- 
cgit v1.2.3


From 151ec0d9ed902e4b44caf2640d5c61885ea4a499 Mon Sep 17 00:00:00 2001
From: Steven Toth <stoth@kernellabs.com>
Date: Sat, 29 Aug 2009 14:41:18 -0300
Subject: V4L/DVB (12945): SAA7164: Ensure the HVR-2200 second tuner is
 configured in slave mode.

SAA7164: Ensure the HVR-2200 second tuner is configured in slave mode.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7164/saa7164-dvb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7164/saa7164-dvb.c b/drivers/media/video/saa7164/saa7164-dvb.c
index c78c73ab47d..6a2d847d6a8 100644
--- a/drivers/media/video/saa7164/saa7164-dvb.c
+++ b/drivers/media/video/saa7164/saa7164-dvb.c
@@ -545,7 +545,7 @@ int saa7164_dvb_register(struct saa7164_tsport *port)
 				/* TODO: addr is in the card struct */
 				dvb_attach(tda18271_attach, port->dvb.frontend,
 					0xc0 >> 1, &i2c_bus->i2c_adap,
-					&hauppauge_hvr22x0_tuner_config);
+					&hauppauge_hvr22x0s_tuner_config);
 			}
 
 			break;
-- 
cgit v1.2.3


From 3a360ced7b3756efbfe822871cc36dc0490fc46b Mon Sep 17 00:00:00 2001
From: Steven Toth <stoth@kernellabs.com>
Date: Thu, 3 Sep 2009 23:46:16 -0300
Subject: V4L/DVB (12946): SAA7164: Add support for a new HVR-2250 hardware
 revision

SAA7164: Add support for a new HVR-2250 hardware revision

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7164/saa7164-cards.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7164/saa7164-cards.c b/drivers/media/video/saa7164/saa7164-cards.c
index c936604e622..a3c299405f4 100644
--- a/drivers/media/video/saa7164/saa7164-cards.c
+++ b/drivers/media/video/saa7164/saa7164-cards.c
@@ -394,6 +394,10 @@ struct saa7164_subid saa7164_subids[] = {
 		.subvendor = 0x0070,
 		.subdevice = 0x8891,
 		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2250_2,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8851,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2250_2,
 	},
 };
 const unsigned int saa7164_idcount = ARRAY_SIZE(saa7164_subids);
-- 
cgit v1.2.3


From 707ca1e30f087f9a6d144693dafc4b67880678c2 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Tue, 15 Sep 2009 08:08:20 -0300
Subject: V4L/DVB (12948): v4l1-compat: fix VIDIOC_G_STD handling

The VIDIOC_G_STD ioctl may not be present in the case of radio receivers.
In that case G_STD will return an error. The v4l1-compat layer should not
attempt to propagate that error to the caller, instead it should be
ignored.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/v4l1-compat.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/v4l1-compat.c b/drivers/media/video/v4l1-compat.c
index 761fbd64db5..0c2105ca611 100644
--- a/drivers/media/video/v4l1-compat.c
+++ b/drivers/media/video/v4l1-compat.c
@@ -564,10 +564,9 @@ static noinline long v4l1_compat_get_input_info(
 		break;
 	}
 	chan->norm = 0;
-	err = drv(file, VIDIOC_G_STD, &sid);
-	if (err < 0)
-		dprintk("VIDIOCGCHAN / VIDIOC_G_STD: %ld\n", err);
-	if (err == 0) {
+	/* Note: G_STD might not be present for radio receivers,
+	 * so we should ignore any errors. */
+	if (drv(file, VIDIOC_G_STD, &sid) == 0) {
 		if (sid & V4L2_STD_PAL)
 			chan->norm = VIDEO_MODE_PAL;
 		if (sid & V4L2_STD_NTSC)
@@ -776,10 +775,9 @@ static noinline long v4l1_compat_get_tuner(
 			tun->flags |= VIDEO_TUNER_SECAM;
 	}
 
-	err = drv(file, VIDIOC_G_STD, &sid);
-	if (err < 0)
-		dprintk("VIDIOCGTUNER / VIDIOC_G_STD: %ld\n", err);
-	if (err == 0) {
+	/* Note: G_STD might not be present for radio receivers,
+	 * so we should ignore any errors. */
+	if (drv(file, VIDIOC_G_STD, &sid) == 0) {
 		if (sid & V4L2_STD_PAL)
 			tun->mode = VIDEO_MODE_PAL;
 		if (sid & V4L2_STD_NTSC)
-- 
cgit v1.2.3


From e558170a91677d3065be3922bb4467d8969d875c Mon Sep 17 00:00:00 2001
From: Antti Palosaari <crope@iki.fi>
Date: Tue, 15 Sep 2009 14:37:20 -0300
Subject: V4L/DVB (12950): tuner-simple: add Philips CU1216L

add Philips CU1216L NIM

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/common/tuners/tuner-types.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/common/tuners/tuner-types.c b/drivers/media/common/tuners/tuner-types.c
index 5c6ef1e23c9..a2204df796e 100644
--- a/drivers/media/common/tuners/tuner-types.c
+++ b/drivers/media/common/tuners/tuner-types.c
@@ -1320,6 +1320,23 @@ static struct tuner_params tuner_partsnic_pti_5nf05_params[] = {
 	},
 };
 
+/* --------- TUNER_PHILIPS_CU1216L - DVB-C NIM ------------------------- */
+
+static struct tuner_range tuner_cu1216l_ranges[] = {
+	{ 16 * 160.25 /*MHz*/, 0xce, 0x01 },
+	{ 16 * 444.25 /*MHz*/, 0xce, 0x02 },
+	{ 16 * 999.99        , 0xce, 0x04 },
+};
+
+static struct tuner_params tuner_philips_cu1216l_params[] = {
+	{
+		.type   = TUNER_PARAM_TYPE_DIGITAL,
+		.ranges = tuner_cu1216l_ranges,
+		.count  = ARRAY_SIZE(tuner_cu1216l_ranges),
+		.iffreq = 16 * 36.125, /*MHz*/
+	},
+};
+
 /* --------------------------------------------------------------------- */
 
 struct tunertype tuners[] = {
@@ -1778,6 +1795,12 @@ struct tunertype tuners[] = {
 		.params = tuner_partsnic_pti_5nf05_params,
 		.count  = ARRAY_SIZE(tuner_partsnic_pti_5nf05_params),
 	},
+	[TUNER_PHILIPS_CU1216L] = {
+		.name = "Philips CU1216L",
+		.params = tuner_philips_cu1216l_params,
+		.count  = ARRAY_SIZE(tuner_philips_cu1216l_params),
+		.stepsize = 62500,
+	},
 };
 EXPORT_SYMBOL(tuners);
 
-- 
cgit v1.2.3


From 285eb1a40242adb3feaf9c73d352cbfeee1bea1c Mon Sep 17 00:00:00 2001
From: Antti Palosaari <crope@iki.fi>
Date: Tue, 15 Sep 2009 14:42:13 -0300
Subject: V4L/DVB (12951): em28xx: add Reddo DVB-C USB TV Box

Support for Reddo DVB-C USB TV Box device. Remote is not working yet.
Thanks to Benjamin Larsson <banan@ludd.ltu.se>

Cc: Benjamin Larsson <banan@ludd.ltu.se>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/em28xx/Kconfig        |  1 +
 drivers/media/video/em28xx/em28xx-cards.c | 24 ++++++++++++++++++++++++
 drivers/media/video/em28xx/em28xx-dvb.c   | 19 +++++++++++++++++++
 drivers/media/video/em28xx/em28xx.h       |  1 +
 4 files changed, 45 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig
index 6524b493e03..c7be0e09782 100644
--- a/drivers/media/video/em28xx/Kconfig
+++ b/drivers/media/video/em28xx/Kconfig
@@ -36,6 +36,7 @@ config VIDEO_EM28XX_DVB
 	depends on VIDEO_EM28XX && DVB_CORE
 	select DVB_LGDT330X if !DVB_FE_CUSTOMISE
 	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
+	select DVB_TDA10023 if !DVB_FE_CUSTOMISE
 	select VIDEOBUF_DVB
 	---help---
 	  This adds support for DVB cards based on the
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 2479c6f8641..8a5ce818170 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -170,6 +170,19 @@ static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = {
 	{	-1,		-1,	-1,		-1},
 };
 
+/* eb1a:2868 Reddo DVB-C USB TV Box
+   GPIO4 - CU1216L NIM
+   Other GPIOs seems to be don't care. */
+static struct em28xx_reg_seq reddo_dvb_c_usb_box[] = {
+	{EM28XX_R08_GPIO,	0xfe,	0xff,		10},
+	{EM28XX_R08_GPIO,	0xde,	0xff,		10},
+	{EM28XX_R08_GPIO,	0xfe,	0xff,		10},
+	{EM28XX_R08_GPIO,	0xff,	0xff,		10},
+	{EM28XX_R08_GPIO,	0x7f,	0xff,		10},
+	{EM28XX_R08_GPIO,	0x6f,	0xff,		10},
+	{EM28XX_R08_GPIO,	0xff,	0xff,		10},
+	{-1,			-1,	-1,		-1},
+};
 
 /* Callback for the most boards */
 static struct em28xx_reg_seq default_tuner_gpio[] = {
@@ -1566,6 +1579,14 @@ struct em28xx_board em28xx_boards[] = {
 			.gpio     = evga_indtube_analog,
 		} },
 	},
+	/* eb1a:2868 Empia EM2870 + Philips CU1216L NIM (Philips TDA10023 +
+	   Infineon TUA6034) */
+	[EM2870_BOARD_REDDO_DVB_C_USB_BOX] = {
+		.name          = "Reddo DVB-C USB TV Box",
+		.tuner_type    = TUNER_ABSENT,
+		.has_dvb       = 1,
+		.dvb_gpio      = reddo_dvb_c_usb_box,
+	},
 };
 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
 
@@ -1593,6 +1614,8 @@ struct usb_device_id em28xx_id_table[] = {
 			.driver_info = EM2820_BOARD_UNKNOWN },
 	{ USB_DEVICE(0xeb1a, 0x2883),
 			.driver_info = EM2820_BOARD_UNKNOWN },
+	{ USB_DEVICE(0xeb1a, 0x2868),
+			.driver_info = EM2820_BOARD_UNKNOWN },
 	{ USB_DEVICE(0xeb1a, 0xe300),
 			.driver_info = EM2861_BOARD_KWORLD_PVRTV_300U },
 	{ USB_DEVICE(0xeb1a, 0xe303),
@@ -1696,6 +1719,7 @@ static struct em28xx_hash_table em28xx_eeprom_hash[] = {
 	{0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028},
 	{0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028},
 	{0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028},
+	{0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT},
 };
 
 /* I2C devicelist hash table for devices with generic USB IDs */
diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c
index d603575431b..db749461e5c 100644
--- a/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/drivers/media/video/em28xx/em28xx-dvb.c
@@ -33,6 +33,7 @@
 #include "s5h1409.h"
 #include "mt352.h"
 #include "mt352_priv.h" /* FIXME */
+#include "tda1002x.h"
 
 MODULE_DESCRIPTION("driver for em28xx based DVB cards");
 MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
@@ -295,6 +296,11 @@ static struct mt352_config terratec_xs_mt352_cfg = {
 	.demod_init = mt352_terratec_xs_init,
 };
 
+static struct tda10023_config em28xx_tda10023_config = {
+	.demod_address = 0x0c,
+	.invert = 1,
+};
+
 /* ------------------------------------------------------------------ */
 
 static int attach_xc3028(u8 addr, struct em28xx *dev)
@@ -549,6 +555,19 @@ static int dvb_init(struct em28xx *dev)
 		}
 		break;
 #endif
+	case EM2870_BOARD_REDDO_DVB_C_USB_BOX:
+		/* Philips CU1216L NIM (Philips TDA10023 + Infineon TUA6034) */
+		dvb->frontend = dvb_attach(tda10023_attach,
+			&em28xx_tda10023_config,
+			&dev->i2c_adap, 0x48);
+		if (dvb->frontend) {
+			if (!dvb_attach(simple_tuner_attach, dvb->frontend,
+				&dev->i2c_adap, 0x60, TUNER_PHILIPS_CU1216L)) {
+				result = -EINVAL;
+				goto out_free;
+			}
+		}
+		break;
 	default:
 		printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card"
 				" isn't supported yet\n",
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index b4a6e07236d..0a73e8bf0d6 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -109,6 +109,7 @@
 #define EM2882_BOARD_EVGA_INDTUBE		  70
 #define EM2820_BOARD_SILVERCREST_WEBCAM           71
 #define EM2861_BOARD_GADMEI_UTV330PLUS           72
+#define EM2870_BOARD_REDDO_DVB_C_USB_BOX          73
 
 /* Limits minimum and default number of buffers */
 #define EM28XX_MIN_BUF 4
-- 
cgit v1.2.3


From ba624ce4adb408a1924e96993cccf8a8ffda3b9d Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Thu, 3 Sep 2009 13:46:59 -0300
Subject: V4L/DVB (12953): gspca - vc032x: Bad GPIO of the Samsung Q1 on
 start/stop streaming.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/vc032x.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c
index 619250e7071..589042f6adb 100644
--- a/drivers/media/video/gspca/vc032x.c
+++ b/drivers/media/video/gspca/vc032x.c
@@ -2946,7 +2946,8 @@ static int sd_start(struct gspca_dev *gspca_dev)
 			reg_w(gspca_dev->dev, 0x89, 0x058c, 0x0000);
 			break;
 		default:
-			reg_w(gspca_dev->dev, 0x89, 0xffff, 0xfdff);
+			if (!(sd->flags & FL_SAMSUNG))
+				reg_w(gspca_dev->dev, 0x89, 0xffff, 0xfdff);
 			break;
 		}
 		msleep(100);
@@ -2964,7 +2965,7 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 
 	if (sd->sensor == SENSOR_MI1310_SOC)
 		reg_w(dev, 0x89, 0x058c, 0x00ff);
-	else
+	else if (!(sd->flags & FL_SAMSUNG))
 		reg_w(dev, 0x89, 0xffff, 0xffff);
 	reg_w(dev, 0xa0, 0x01, 0xb301);
 	reg_w(dev, 0xa0, 0x09, 0xb003);
@@ -2981,7 +2982,7 @@ static void sd_stop0(struct gspca_dev *gspca_dev)
 /*fixme: is this useful?*/
 	if (sd->sensor == SENSOR_MI1310_SOC)
 		reg_w(dev, 0x89, 0x058c, 0x00ff);
-	else
+	else if (!(sd->flags & FL_SAMSUNG))
 		reg_w(dev, 0x89, 0xffff, 0xffff);
 }
 
-- 
cgit v1.2.3


From 4f7cb8837cec65ade18b0e2655292fd98040234e Mon Sep 17 00:00:00 2001
From: Olivier Lorin <o.lorin@laposte.net>
Date: Tue, 15 Sep 2009 14:17:07 -0300
Subject: V4L/DVB (12954): gspca - gl860: Addition of GL860 based webcams

- add the Genesys Logic 05e3:0503 and 05e3:f191 webcam

Signed-off-by: Olivier Lorin <o.lorin@laposte.net>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/Kconfig              |   1 +
 drivers/media/video/gspca/Makefile             |   1 +
 drivers/media/video/gspca/gl860/Kconfig        |   8 +
 drivers/media/video/gspca/gl860/Makefile       |  10 +
 drivers/media/video/gspca/gl860/gl860-mi1320.c | 537 ++++++++++++++
 drivers/media/video/gspca/gl860/gl860-mi2020.c | 937 +++++++++++++++++++++++++
 drivers/media/video/gspca/gl860/gl860-ov2640.c | 505 +++++++++++++
 drivers/media/video/gspca/gl860/gl860-ov9655.c | 337 +++++++++
 drivers/media/video/gspca/gl860/gl860.c        | 783 +++++++++++++++++++++
 drivers/media/video/gspca/gl860/gl860.h        | 108 +++
 10 files changed, 3227 insertions(+)
 create mode 100644 drivers/media/video/gspca/gl860/Kconfig
 create mode 100644 drivers/media/video/gspca/gl860/Makefile
 create mode 100644 drivers/media/video/gspca/gl860/gl860-mi1320.c
 create mode 100644 drivers/media/video/gspca/gl860/gl860-mi2020.c
 create mode 100644 drivers/media/video/gspca/gl860/gl860-ov2640.c
 create mode 100644 drivers/media/video/gspca/gl860/gl860-ov9655.c
 create mode 100644 drivers/media/video/gspca/gl860/gl860.c
 create mode 100644 drivers/media/video/gspca/gl860/gl860.h

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig
index 8897283b0bb..fe2e490ebc5 100644
--- a/drivers/media/video/gspca/Kconfig
+++ b/drivers/media/video/gspca/Kconfig
@@ -19,6 +19,7 @@ if USB_GSPCA && VIDEO_V4L2
 
 source "drivers/media/video/gspca/m5602/Kconfig"
 source "drivers/media/video/gspca/stv06xx/Kconfig"
+source "drivers/media/video/gspca/gl860/Kconfig"
 
 config USB_GSPCA_CONEX
 	tristate "Conexant Camera Driver"
diff --git a/drivers/media/video/gspca/Makefile b/drivers/media/video/gspca/Makefile
index 035616b5e86..b7420818037 100644
--- a/drivers/media/video/gspca/Makefile
+++ b/drivers/media/video/gspca/Makefile
@@ -58,3 +58,4 @@ gspca_zc3xx-objs    := zc3xx.o
 
 obj-$(CONFIG_USB_M5602)   += m5602/
 obj-$(CONFIG_USB_STV06XX) += stv06xx/
+obj-$(CONFIG_USB_GL860)   += gl860/
diff --git a/drivers/media/video/gspca/gl860/Kconfig b/drivers/media/video/gspca/gl860/Kconfig
new file mode 100644
index 00000000000..22772f53ec7
--- /dev/null
+++ b/drivers/media/video/gspca/gl860/Kconfig
@@ -0,0 +1,8 @@
+config USB_GL860
+	tristate "GL860 USB Camera Driver"
+	depends on VIDEO_V4L2 && USB_GSPCA
+	help
+	  Say Y here if you want support for cameras based on the GL860 chip.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called gspca_gl860.
diff --git a/drivers/media/video/gspca/gl860/Makefile b/drivers/media/video/gspca/gl860/Makefile
new file mode 100644
index 00000000000..13c9403cc87
--- /dev/null
+++ b/drivers/media/video/gspca/gl860/Makefile
@@ -0,0 +1,10 @@
+obj-$(CONFIG_USB_GL860) += gspca_gl860.o
+
+gspca_gl860-objs := gl860.o \
+		    gl860-mi1320.o \
+		    gl860-ov2640.o \
+		    gl860-ov9655.o \
+		    gl860-mi2020.o
+
+EXTRA_CFLAGS += -Idrivers/media/video/gspca
+
diff --git a/drivers/media/video/gspca/gl860/gl860-mi1320.c b/drivers/media/video/gspca/gl860/gl860-mi1320.c
new file mode 100644
index 00000000000..39f6261c1a0
--- /dev/null
+++ b/drivers/media/video/gspca/gl860/gl860-mi1320.c
@@ -0,0 +1,537 @@
+/* @file gl860-mi1320.c
+ * @author Olivier LORIN from my logs
+ * @date 2009-08-27
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* Sensor : MI1320 */
+
+#include "gl860.h"
+
+static struct validx tbl_common[] = {
+	{0xba00, 0x00f0}, {0xba00, 0x00f1}, {0xba51, 0x0066}, {0xba02, 0x00f1},
+	{0xba05, 0x0067}, {0xba05, 0x00f1}, {0xbaa0, 0x0065}, {0xba00, 0x00f1},
+	{0xffff, 0xffff},
+	{0xba00, 0x00f0}, {0xba02, 0x00f1}, {0xbafa, 0x0028}, {0xba02, 0x00f1},
+	{0xba00, 0x00f0}, {0xba01, 0x00f1}, {0xbaf0, 0x0006}, {0xba0e, 0x00f1},
+	{0xba70, 0x0006}, {0xba0e, 0x00f1},
+	{0xffff, 0xffff},
+	{0xba74, 0x0006}, {0xba0e, 0x00f1},
+	{0xffff, 0xffff},
+	{0x0061, 0x0000}, {0x0068, 0x000d},
+};
+
+static struct validx tbl_init_at_startup[] = {
+	{0x0000, 0x0000}, {0x0010, 0x0010},
+	{35, 0xffff},
+	{0x0008, 0x00c0}, {0x0001, 0x00c1}, {0x0001, 0x00c2}, {0x0020, 0x0006},
+	{0x006a, 0x000d},
+};
+
+static struct validx tbl_sensor_settings_common[] = {
+	{0x0010, 0x0010}, {0x0003, 0x00c1}, {0x0042, 0x00c2}, {0x0040, 0x0000},
+	{0x006a, 0x0007}, {0x006a, 0x000d}, {0x0063, 0x0006},
+};
+static struct validx tbl_sensor_settings_1280[] = {
+	{0xba00, 0x00f0}, {0xba00, 0x00f1}, {0xba5a, 0x0066}, {0xba02, 0x00f1},
+	{0xba05, 0x0067}, {0xba05, 0x00f1}, {0xba20, 0x0065}, {0xba00, 0x00f1},
+};
+static struct validx tbl_sensor_settings_800[] = {
+	{0xba00, 0x00f0}, {0xba00, 0x00f1}, {0xba5a, 0x0066}, {0xba02, 0x00f1},
+	{0xba05, 0x0067}, {0xba05, 0x00f1}, {0xba20, 0x0065}, {0xba00, 0x00f1},
+};
+static struct validx tbl_sensor_settings_640[] = {
+	{0xba00, 0x00f0}, {0xba00, 0x00f1}, {0xbaa0, 0x0065}, {0xba00, 0x00f1},
+	{0xba51, 0x0066}, {0xba02, 0x00f1}, {0xba05, 0x0067}, {0xba05, 0x00f1},
+	{0xba20, 0x0065}, {0xba00, 0x00f1},
+};
+static struct validx tbl_post_unset_alt[] = {
+	{0xba00, 0x00f0}, {0xba00, 0x00f1}, {0xbaa0, 0x0065}, {0xba00, 0x00f1},
+	{0x0061, 0x0000}, {0x0068, 0x000d},
+};
+
+static u8 *tbl_1280[] = {
+	"\x0d\x80\xf1\x08\x03\x04\xf1\x00" "\x04\x05\xf1\x02\x05\x00\xf1\xf1"
+	"\x06\x00\xf1\x0d\x20\x01\xf1\x00" "\x21\x84\xf1\x00\x0d\x00\xf1\x08"
+	"\xf0\x00\xf1\x01\x34\x00\xf1\x00" "\x9b\x43\xf1\x00\xa6\x05\xf1\x00"
+	"\xa9\x04\xf1\x00\xa1\x05\xf1\x00" "\xa4\x04\xf1\x00\xae\x0a\xf1\x08"
+	,
+	"\xf0\x00\xf1\x02\x3a\x05\xf1\xf1" "\x3c\x05\xf1\xf1\x59\x01\xf1\x47"
+	"\x5a\x01\xf1\x88\x5c\x0a\xf1\x06" "\x5d\x0e\xf1\x0a\x64\x5e\xf1\x1c"
+	"\xd2\x00\xf1\xcf\xcb\x00\xf1\x01"
+	,
+	"\xd3\x02\xd4\x28\xd5\x01\xd0\x02" "\xd1\x18\xd2\xc1"
+};
+
+static u8 *tbl_800[] = {
+	"\x0d\x80\xf1\x08\x03\x03\xf1\xc0" "\x04\x05\xf1\x02\x05\x00\xf1\xf1"
+	"\x06\x00\xf1\x0d\x20\x01\xf1\x00" "\x21\x84\xf1\x00\x0d\x00\xf1\x08"
+	"\xf0\x00\xf1\x01\x34\x00\xf1\x00" "\x9b\x43\xf1\x00\xa6\x05\xf1\x00"
+	"\xa9\x03\xf1\xc0\xa1\x03\xf1\x20" "\xa4\x02\xf1\x5a\xae\x0a\xf1\x08"
+	,
+	"\xf0\x00\xf1\x02\x3a\x05\xf1\xf1" "\x3c\x05\xf1\xf1\x59\x01\xf1\x47"
+	"\x5a\x01\xf1\x88\x5c\x0a\xf1\x06" "\x5d\x0e\xf1\x0a\x64\x5e\xf1\x1c"
+	"\xd2\x00\xf1\xcf\xcb\x00\xf1\x01"
+	,
+	"\xd3\x02\xd4\x18\xd5\x21\xd0\x02" "\xd1\x10\xd2\x59"
+};
+
+static u8 *tbl_640[] = {
+	"\x0d\x80\xf1\x08\x03\x04\xf1\x04" "\x04\x05\xf1\x02\x07\x01\xf1\x7c"
+	"\x08\x00\xf1\x0e\x21\x80\xf1\x00" "\x0d\x00\xf1\x08\xf0\x00\xf1\x01"
+	"\x34\x10\xf1\x10\x3a\x43\xf1\x00" "\xa6\x05\xf1\x02\xa9\x04\xf1\x04"
+	"\xa7\x02\xf1\x81\xaa\x01\xf1\xe2" "\xae\x0c\xf1\x09"
+	,
+	"\xf0\x00\xf1\x02\x39\x03\xf1\xfc" "\x3b\x04\xf1\x04\x57\x01\xf1\xb6"
+	"\x58\x02\xf1\x0d\x5c\x1f\xf1\x19" "\x5d\x24\xf1\x1e\x64\x5e\xf1\x1c"
+	"\xd2\x00\xf1\x00\xcb\x00\xf1\x01"
+	,
+	"\xd3\x02\xd4\x10\xd5\x81\xd0\x02" "\xd1\x08\xd2\xe1"
+};
+
+static s32 tbl_sat[] = {0x25, 0x1d, 0x15, 0x0d, 0x05, 0x4d, 0x55, 0x5d, 0x2d};
+static s32 tbl_bright[] = {0, 8, 0x10, 0x20, 0x30, 0x40, 0x50, 0x60, 0x70};
+static s32 tbl_backlight[] = {0x0e, 0x06, 0x02};
+
+static s32 tbl_cntr1[] = {
+	0x90, 0x98, 0xa0, 0xa8, 0xb0, 0xb8, 0xc0, 0xc8, 0xd0, 0xe0, 0xf0};
+static s32 tbl_cntr2[] = {
+	0x70, 0x68, 0x60, 0x58, 0x50, 0x48, 0x40, 0x38, 0x30, 0x20, 0x10};
+
+static u8 dat_wbalNL[] =
+	"\xf0\x00\xf1\x01\x05\x00\xf1\x06" "\x3b\x04\xf1\x2a\x47\x10\xf1\x10"
+	"\x9d\x3c\xf1\xae\xaf\x10\xf1\x00" "\xf0\x00\xf1\x02\x2f\x91\xf1\x20"
+	"\x9c\x91\xf1\x20\x37\x03\xf1\x00" "\x9d\xc5\xf1\x0f\xf0\x00\xf1\x00";
+
+static u8 dat_wbalLL[] =
+	"\xf0\x00\xf1\x01\x05\x00\xf1\x0c" "\x3b\x04\xf1\x2a\x47\x40\xf1\x40"
+	"\x9d\x20\xf1\xae\xaf\x10\xf1\x00" "\xf0\x00\xf1\x02\x2f\xd1\xf1\x00"
+	"\x9c\xd1\xf1\x00\x37\x03\xf1\x00" "\x9d\xc5\xf1\x3f\xf0\x00\xf1\x00";
+
+static u8 dat_wbalBL[] =
+	"\xf0\x00\xf1\x01\x05\x00\xf1\x06" "\x47\x10\xf1\x30\x9d\x3c\xf1\xae"
+	"\xaf\x10\xf1\x00\xf0\x00\xf1\x02" "\x2f\x91\xf1\x20\x9c\x91\xf1\x20"
+	"\x37\x03\xf1\x00\x9d\xc5\xf1\x2f" "\xf0\x00\xf1\x00";
+
+static u8 dat_hvflip1[] = {0xf0, 0x00, 0xf1, 0x00};
+
+static u8 s000[] =
+	"\x00\x01\x07\x6a\x06\x63\x0d\x6a" "\xc0\x00\x10\x10\xc1\x03\xc2\x42"
+	"\xd8\x04\x58\x00\x04\x02";
+static u8 s001[] =
+	"\x0d\x00\xf1\x0b\x0d\x00\xf1\x08" "\x35\x00\xf1\x22\x68\x00\xf1\x5d"
+	"\xf0\x00\xf1\x01\x06\x70\xf1\x0e" "\xf0\x00\xf1\x02\xdd\x18\xf1\xe0";
+static u8 s002[] =
+	"\x05\x01\xf1\x84\x06\x00\xf1\x44" "\x07\x00\xf1\xbe\x08\x00\xf1\x1e"
+	"\x20\x01\xf1\x03\x21\x84\xf1\x00" "\x22\x0d\xf1\x0f\x24\x80\xf1\x00"
+	"\x34\x18\xf1\x2d\x35\x00\xf1\x22" "\x43\x83\xf1\x83\x59\x00\xf1\xff";
+static u8 s003[] =
+	"\xf0\x00\xf1\x02\x39\x06\xf1\x8c" "\x3a\x06\xf1\x8c\x3b\x03\xf1\xda"
+	"\x3c\x05\xf1\x30\x57\x01\xf1\x0c" "\x58\x01\xf1\x42\x59\x01\xf1\x0c"
+	"\x5a\x01\xf1\x42\x5c\x13\xf1\x0e" "\x5d\x17\xf1\x12\x64\x1e\xf1\x1c";
+static u8 s004[] =
+	"\xf0\x00\xf1\x02\x24\x5f\xf1\x20" "\x28\xea\xf1\x02\x5f\x41\xf1\x43";
+static u8 s005[] =
+	"\x02\x00\xf1\xee\x03\x29\xf1\x1a" "\x04\x02\xf1\xa4\x09\x00\xf1\x68"
+	"\x0a\x00\xf1\x2a\x0b\x00\xf1\x04" "\x0c\x00\xf1\x93\x0d\x00\xf1\x82"
+	"\x0e\x00\xf1\x40\x0f\x00\xf1\x5f" "\x10\x00\xf1\x4e\x11\x00\xf1\x5b";
+static u8 s006[] =
+	"\x15\x00\xf1\xc9\x16\x00\xf1\x5e" "\x17\x00\xf1\x9d\x18\x00\xf1\x06"
+	"\x19\x00\xf1\x89\x1a\x00\xf1\x12" "\x1b\x00\xf1\xa1\x1c\x00\xf1\xe4"
+	"\x1d\x00\xf1\x7a\x1e\x00\xf1\x64" "\xf6\x00\xf1\x5f";
+static u8 s007[] =
+	"\xf0\x00\xf1\x01\x53\x09\xf1\x03" "\x54\x3d\xf1\x1c\x55\x99\xf1\x72"
+	"\x56\xc1\xf1\xb1\x57\xd8\xf1\xce" "\x58\xe0\xf1\x00\xdc\x0a\xf1\x03"
+	"\xdd\x45\xf1\x20\xde\xae\xf1\x82" "\xdf\xdc\xf1\xc9\xe0\xf6\xf1\xea"
+	"\xe1\xff\xf1\x00";
+static u8 s008[] =
+	"\xf0\x00\xf1\x01\x80\x00\xf1\x06" "\x81\xf6\xf1\x08\x82\xfb\xf1\xf7"
+	"\x83\x00\xf1\xfe\xb6\x07\xf1\x03" "\xb7\x18\xf1\x0c\x84\xfb\xf1\x06"
+	"\x85\xfb\xf1\xf9\x86\x00\xf1\xff" "\xb8\x07\xf1\x04\xb9\x16\xf1\x0a";
+static u8 s009[] =
+	"\x87\xfa\xf1\x05\x88\xfc\xf1\xf9" "\x89\x00\xf1\xff\xba\x06\xf1\x03"
+	"\xbb\x17\xf1\x09\x8a\xe8\xf1\x14" "\x8b\xf7\xf1\xf0\x8c\xfd\xf1\xfa"
+	"\x8d\x00\xf1\x00\xbc\x05\xf1\x01" "\xbd\x0c\xf1\x08\xbe\x00\xf1\x14";
+static u8 s010[] =
+	"\x8e\xea\xf1\x13\x8f\xf7\xf1\xf2" "\x90\xfd\xf1\xfa\x91\x00\xf1\x00"
+	"\xbf\x05\xf1\x01\xc0\x0a\xf1\x08" "\xc1\x00\xf1\x0c\x92\xed\xf1\x0f"
+	"\x93\xf9\xf1\xf4\x94\xfe\xf1\xfb" "\x95\x00\xf1\x00\xc2\x04\xf1\x01"
+	"\xc3\x0a\xf1\x07\xc4\x00\xf1\x10";
+static u8 s011[] =
+	"\xf0\x00\xf1\x01\x05\x00\xf1\x06" "\x25\x00\xf1\x55\x34\x10\xf1\x10"
+	"\x35\xf0\xf1\x10\x3a\x02\xf1\x03" "\x3b\x04\xf1\x2a\x9b\x43\xf1\x00"
+	"\xa4\x03\xf1\xc0\xa7\x02\xf1\x81";
+
+static int  mi1320_init_at_startup(struct gspca_dev *gspca_dev);
+static int  mi1320_configure_alt(struct gspca_dev *gspca_dev);
+static int  mi1320_init_pre_alt(struct gspca_dev *gspca_dev);
+static int  mi1320_init_post_alt(struct gspca_dev *gspca_dev);
+static void mi1320_post_unset_alt(struct gspca_dev *gspca_dev);
+static int  mi1320_sensor_settings(struct gspca_dev *gspca_dev);
+static int  mi1320_camera_settings(struct gspca_dev *gspca_dev);
+/*==========================================================================*/
+
+void mi1320_init_settings(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->vcur.backlight  =  0;
+	sd->vcur.brightness =  0;
+	sd->vcur.sharpness  =  6;
+	sd->vcur.contrast   = 10;
+	sd->vcur.gamma      = 20;
+	sd->vcur.hue        =  0;
+	sd->vcur.saturation =  6;
+	sd->vcur.whitebal   =  0;
+	sd->vcur.mirror     = 0;
+	sd->vcur.flip       = 0;
+	sd->vcur.AC50Hz     = 1;
+
+	sd->vmax.backlight  =  2;
+	sd->vmax.brightness =  8;
+	sd->vmax.sharpness  =  7;
+	sd->vmax.contrast   =  0; /* 10 but not working with tihs driver */
+	sd->vmax.gamma      = 40;
+	sd->vmax.hue        =  5 + 1;
+	sd->vmax.saturation =  8;
+	sd->vmax.whitebal   =  2;
+	sd->vmax.mirror     = 1;
+	sd->vmax.flip       = 1;
+	sd->vmax.AC50Hz     = 1;
+
+	sd->dev_camera_settings = mi1320_camera_settings;
+	sd->dev_init_at_startup = mi1320_init_at_startup;
+	sd->dev_configure_alt   = mi1320_configure_alt;
+	sd->dev_init_pre_alt    = mi1320_init_pre_alt;
+	sd->dev_post_unset_alt  = mi1320_post_unset_alt;
+}
+
+/*==========================================================================*/
+
+static void common(struct gspca_dev *gspca_dev)
+{
+	s32 n; /* reserved for FETCH macros */
+
+	ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, 22, s000);
+	ctrl_out(gspca_dev, 0x40, 1, 0x0041, 0x0000, 0, NULL);
+	ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 32, s001);
+	n = fetch_validx(gspca_dev, tbl_common, ARRAY_SIZE(tbl_common));
+	ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 48, s002);
+	ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 48, s003);
+	ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 16, s004);
+	ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 48, s005);
+	ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 44, s006);
+	keep_on_fetching_validx(gspca_dev, tbl_common,
+					ARRAY_SIZE(tbl_common), n);
+	ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 52, s007);
+	ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 48, s008);
+	ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 48, s009);
+	ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 56, s010);
+	keep_on_fetching_validx(gspca_dev, tbl_common,
+					ARRAY_SIZE(tbl_common), n);
+	ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 40, s011);
+	keep_on_fetching_validx(gspca_dev, tbl_common,
+					ARRAY_SIZE(tbl_common), n);
+}
+
+static int mi1320_init_at_startup(struct gspca_dev *gspca_dev)
+{
+	fetch_validx(gspca_dev, tbl_init_at_startup,
+				ARRAY_SIZE(tbl_init_at_startup));
+
+	common(gspca_dev);
+
+/*	ctrl_out(gspca_dev, 0x40, 11, 0x0000, 0x0000, 0, NULL); */
+
+	return 0;
+}
+
+static int mi1320_init_pre_alt(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->mirrorMask = 0;
+
+	sd->vold.backlight  = -1;
+	sd->vold.brightness = -1;
+	sd->vold.sharpness  = -1;
+	sd->vold.contrast   = -1;
+	sd->vold.saturation = -1;
+	sd->vold.gamma    = -1;
+	sd->vold.hue      = -1;
+	sd->vold.whitebal = -1;
+	sd->vold.mirror   = -1;
+	sd->vold.flip     = -1;
+	sd->vold.AC50Hz   = -1;
+
+	common(gspca_dev);
+
+	mi1320_sensor_settings(gspca_dev);
+
+	mi1320_init_post_alt(gspca_dev);
+
+	return 0;
+}
+
+static int mi1320_init_post_alt(struct gspca_dev *gspca_dev)
+{
+	mi1320_camera_settings(gspca_dev);
+
+	return 0;
+}
+
+static int mi1320_sensor_settings(struct gspca_dev *gspca_dev)
+{
+	s32 reso = gspca_dev->cam.cam_mode[(s32) gspca_dev->curr_mode].priv;
+
+	ctrl_out(gspca_dev, 0x40, 5, 0x0001, 0x0000, 0, NULL);
+
+	fetch_validx(gspca_dev, tbl_sensor_settings_common,
+				ARRAY_SIZE(tbl_sensor_settings_common));
+
+	switch (reso) {
+	case IMAGE_1280:
+		fetch_validx(gspca_dev, tbl_sensor_settings_1280,
+					ARRAY_SIZE(tbl_sensor_settings_1280));
+		ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 64, tbl_1280[0]);
+		ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 40, tbl_1280[1]);
+		ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, 12, tbl_1280[2]);
+		break;
+
+	case IMAGE_800:
+		fetch_validx(gspca_dev, tbl_sensor_settings_800,
+					ARRAY_SIZE(tbl_sensor_settings_800));
+		ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 64, tbl_800[0]);
+		ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 40, tbl_800[1]);
+		ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, 12, tbl_800[2]);
+		break;
+
+	default:
+		fetch_validx(gspca_dev, tbl_sensor_settings_640,
+					ARRAY_SIZE(tbl_sensor_settings_640));
+		ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 60, tbl_640[0]);
+		ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 40, tbl_640[1]);
+		ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, 12, tbl_640[2]);
+		break;
+	}
+	return 0;
+}
+
+static int mi1320_configure_alt(struct gspca_dev *gspca_dev)
+{
+	s32 reso = gspca_dev->cam.cam_mode[(s32) gspca_dev->curr_mode].priv;
+
+	switch (reso) {
+	case IMAGE_640:
+		gspca_dev->alt = 3 + 1;
+		break;
+
+	case IMAGE_800:
+	case IMAGE_1280:
+		gspca_dev->alt = 1 + 1;
+		break;
+	}
+	return 0;
+}
+
+int mi1320_camera_settings(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	s32 backlight = sd->vcur.backlight;
+	s32 bright = sd->vcur.brightness;
+	s32 sharp  = sd->vcur.sharpness;
+	s32 cntr   = sd->vcur.contrast;
+	s32 gam	   = sd->vcur.gamma;
+	s32 hue    = sd->vcur.hue;
+	s32 sat	   = sd->vcur.saturation;
+	s32 wbal   = sd->vcur.whitebal;
+	s32 mirror = (((sd->vcur.mirror > 0) ^ sd->mirrorMask) > 0);
+	s32 flip   = (((sd->vcur.flip   > 0) ^ sd->mirrorMask) > 0);
+	s32 freq   = (sd->vcur.AC50Hz > 0);
+	s32 i;
+
+	if (freq != sd->vold.AC50Hz) {
+		sd->vold.AC50Hz = freq;
+
+		freq = 2 * (freq == 0);
+		ctrl_out(gspca_dev, 0x40, 1, 0xba00, 0x00f0, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0xba02, 0x00f1, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0xba00       , 0x005b, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0xba01 + freq, 0x00f1, 0, NULL);
+	}
+
+	if (wbal != sd->vold.whitebal) {
+		sd->vold.whitebal = wbal;
+		if (wbal < 0 || wbal > sd->vmax.whitebal)
+			wbal = 0;
+
+		for (i = 0; i < 2; i++) {
+			if (wbal == 0) { /* Normal light */
+				ctrl_out(gspca_dev, 0x40, 1,
+						0x0010, 0x0010, 0, NULL);
+				ctrl_out(gspca_dev, 0x40, 1,
+						0x0003, 0x00c1, 0, NULL);
+				ctrl_out(gspca_dev, 0x40, 1,
+						0x0042, 0x00c2, 0, NULL);
+				ctrl_out(gspca_dev, 0x40, 3,
+						0xba00, 0x0200, 48, dat_wbalNL);
+			}
+
+			if (wbal == 1) { /* Low light */
+				ctrl_out(gspca_dev, 0x40, 1,
+						0x0010, 0x0010, 0, NULL);
+				ctrl_out(gspca_dev, 0x40, 1,
+						0x0004, 0x00c1, 0, NULL);
+				ctrl_out(gspca_dev, 0x40, 1,
+						0x0043, 0x00c2, 0, NULL);
+				ctrl_out(gspca_dev, 0x40, 3,
+						0xba00, 0x0200, 48, dat_wbalLL);
+			}
+
+			if (wbal == 2) { /* Back light */
+				ctrl_out(gspca_dev, 0x40, 1,
+						0x0010, 0x0010, 0, NULL);
+				ctrl_out(gspca_dev, 0x40, 1,
+						0x0003, 0x00c1, 0, NULL);
+				ctrl_out(gspca_dev, 0x40, 1,
+						0x0042, 0x00c2, 0, NULL);
+				ctrl_out(gspca_dev, 0x40, 3,
+						0xba00, 0x0200, 44, dat_wbalBL);
+			}
+		}
+	}
+
+	if (bright != sd->vold.brightness) {
+		sd->vold.brightness = bright;
+		if (bright < 0 || bright > sd->vmax.brightness)
+			bright = 0;
+
+		bright = tbl_bright[bright];
+		ctrl_out(gspca_dev, 0x40, 1, 0xba00, 0x00f0, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0xba01, 0x00f1, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0xba00 + bright, 0x0034, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0xba00 + bright, 0x00f1, 0, NULL);
+	}
+
+	if (sat != sd->vold.saturation) {
+		sd->vold.saturation = sat;
+		if (sat < 0 || sat > sd->vmax.saturation)
+			sat = 0;
+
+		sat = tbl_sat[sat];
+		ctrl_out(gspca_dev, 0x40, 1, 0xba00, 0x00f0, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0xba01, 0x00f1, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0xba00      , 0x0025, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0xba00 + sat, 0x00f1, 0, NULL);
+	}
+
+	if (sharp != sd->vold.sharpness) {
+		sd->vold.sharpness = sharp;
+		if (sharp < 0 || sharp > sd->vmax.sharpness)
+			sharp = 0;
+
+		ctrl_out(gspca_dev, 0x40, 1, 0xba00, 0x00f0, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0xba01, 0x00f1, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0xba00        , 0x0005, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0xba00 + sharp, 0x00f1, 0, NULL);
+	}
+
+	if (hue != sd->vold.hue) {
+		/* 0=normal  1=NB  2="sepia"  3=negative  4=other  5=other2 */
+		if (hue < 0 || hue > sd->vmax.hue)
+			hue = 0;
+		if (hue == sd->vmax.hue)
+			sd->swapRB = 1;
+		else
+			sd->swapRB = 0;
+
+		ctrl_out(gspca_dev, 0x40, 1, 0xba00, 0x00f0, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0xba01, 0x00f1, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0xba70, 0x00e2, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0xba00 + hue * (hue < 6), 0x00f1,
+							0, NULL);
+	}
+
+	if (backlight != sd->vold.backlight) {
+		sd->vold.backlight = backlight;
+		if (backlight < 0 || backlight > sd->vmax.backlight)
+			backlight = 0;
+
+		backlight = tbl_backlight[backlight];
+		for (i = 0; i < 2; i++) {
+			ctrl_out(gspca_dev, 0x40, 1, 0xba00, 0x00f0, 0, NULL);
+			ctrl_out(gspca_dev, 0x40, 1, 0xba01, 0x00f1, 0, NULL);
+			ctrl_out(gspca_dev, 0x40, 1, 0xba74, 0x0006, 0, NULL);
+			ctrl_out(gspca_dev, 0x40, 1, 0xba80 + backlight, 0x00f1,
+								0, NULL);
+		}
+	}
+
+	if (hue != sd->vold.hue) {
+		sd->vold.hue = hue;
+
+		ctrl_out(gspca_dev, 0x40, 1, 0xba00, 0x00f0, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0xba01, 0x00f1, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0xba70, 0x00e2, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0xba00 + hue * (hue < 6), 0x00f1,
+							0, NULL);
+	}
+
+	if (mirror != sd->vold.mirror || flip != sd->vold.flip) {
+		u8 dat_hvflip2[4] = {0x20, 0x01, 0xf1, 0x00};
+		sd->vold.mirror = mirror;
+		sd->vold.flip = flip;
+
+		dat_hvflip2[3] = flip + 2 * mirror;
+		ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 4, dat_hvflip1);
+		ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 4, dat_hvflip2);
+	}
+
+	if (gam != sd->vold.gamma) {
+		sd->vold.gamma = gam;
+		if (gam < 0 || gam > sd->vmax.gamma)
+			gam = 0;
+
+		gam = 2 * gam;
+		ctrl_out(gspca_dev, 0x40, 1, 0xba00, 0x00f0, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0xba01, 0x00f1, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0xba04      , 0x003b, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0xba02 + gam, 0x00f1, 0, NULL);
+	}
+
+	if (cntr != sd->vold.contrast) {
+		sd->vold.contrast = cntr;
+		if (cntr < 0 || cntr > sd->vmax.contrast)
+			cntr = 0;
+
+		ctrl_out(gspca_dev, 0x40, 1, 0xba00, 0x00f0, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0xba01, 0x00f1, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0xba00 + tbl_cntr1[cntr], 0x0035,
+							0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0xba00 + tbl_cntr2[cntr], 0x00f1,
+							0, NULL);
+	}
+
+	return 0;
+}
+
+static void mi1320_post_unset_alt(struct gspca_dev *gspca_dev)
+{
+	ctrl_out(gspca_dev, 0x40, 5, 0x0000, 0x0000, 0, NULL);
+
+	fetch_validx(gspca_dev, tbl_post_unset_alt,
+				ARRAY_SIZE(tbl_post_unset_alt));
+}
diff --git a/drivers/media/video/gspca/gl860/gl860-mi2020.c b/drivers/media/video/gspca/gl860/gl860-mi2020.c
new file mode 100644
index 00000000000..ffb09fed3e8
--- /dev/null
+++ b/drivers/media/video/gspca/gl860/gl860-mi2020.c
@@ -0,0 +1,937 @@
+/* @file gl860-mi2020.c
+ * @author Olivier LORIN, from Ice/Soro2005's logs(A), Fret_saw/Hulkie's
+ * logs(B) and Tricid"s logs(C). With the help of Kytrix/BUGabundo/Blazercist.
+ * @date 2009-08-27
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* Sensor : MI2020 */
+
+#include "gl860.h"
+
+static u8 dat_bright1[] = {0x8c, 0xa2, 0x06};
+static u8 dat_bright3[] = {0x8c, 0xa1, 0x02};
+static u8 dat_bright4[] = {0x90, 0x00, 0x0f};
+static u8 dat_bright5[] = {0x8c, 0xa1, 0x03};
+static u8 dat_bright6[] = {0x90, 0x00, 0x05};
+
+static u8 dat_dummy1[] = {0x90, 0x00, 0x06};
+/*static u8 dummy2[] = {0x8c, 0xa1, 0x02};*/
+/*static u8 dummy3[] = {0x90, 0x00, 0x1f};*/
+
+static u8 dat_hvflip1[] = {0x8c, 0x27, 0x19};
+static u8 dat_hvflip3[] = {0x8c, 0x27, 0x3b};
+static u8 dat_hvflip5[] = {0x8c, 0xa1, 0x03};
+static u8 dat_hvflip6[] = {0x90, 0x00, 0x06};
+
+static u8 dat_freq1[] = { 0x8c, 0xa4, 0x04 };
+
+static u8 dat_multi5[] = { 0x8c, 0xa1, 0x03 };
+static u8 dat_multi6[] = { 0x90, 0x00, 0x05 };
+
+static struct validx tbl_common_a[] = {
+	{0x0000, 0x0000},
+	{1, 0xffff}, /* msleep(35); */
+	{0x006a, 0x0007}, {0x0063, 0x0006}, {0x006a, 0x000d}, {0x0000, 0x00c0},
+	{0x0010, 0x0010}, {0x0003, 0x00c1}, {0x0042, 0x00c2}, {0x0004, 0x00d8},
+	{0x0000, 0x0058}, {0x0002, 0x0004}, {0x0041, 0x0000},
+};
+
+static struct validx tbl_common_b[] = {
+	{0x006a, 0x0007},
+	{35, 0xffff},
+	{0x00ef, 0x0006},
+	{35, 0xffff},
+	{0x006a, 0x000d},
+	{35, 0xffff},
+	{0x0000, 0x00c0}, {0x0010, 0x0010}, {0x0003, 0x00c1}, {0x0042, 0x00c2},
+	{0x0004, 0x00d8}, {0x0000, 0x0058}, {0x0041, 0x0000},
+};
+
+static struct idxdata tbl_common_c[] = {
+	{0x32, "\x02\x00\x08"}, {0x33, "\xf4\x03\x1d"},
+	{6, "\xff\xff\xff"}, /* 12 */
+	{0x34, "\x1e\x8f\x09"}, {0x34, "\x1c\x01\x28"}, {0x34, "\x1e\x8f\x09"},
+	{2, "\xff\xff\xff"}, /* - */
+	{0x34, "\x1e\x8f\x09"}, {0x32, "\x14\x06\xe6"}, {0x33, "\x8c\x22\x23"},
+	{0x33, "\x90\x00\x00"}, {0x33, "\x8c\xa2\x0f"}, {0x33, "\x90\x00\x0d"},
+	{0x33, "\x8c\xa2\x10"}, {0x33, "\x90\x00\x0b"}, {0x33, "\x8c\xa2\x11"},
+	{0x33, "\x90\x00\x07"}, {0x33, "\xf4\x03\x1d"}, {0x35, "\xa2\x00\xe2"},
+	{0x33, "\x8c\xab\x05"}, {0x33, "\x90\x00\x01"}, {0x32, "\x6e\x00\x86"},
+	{0x32, "\x70\x0f\xaa"}, {0x32, "\x72\x0f\xe4"}, {0x33, "\x8c\xa3\x4a"},
+	{0x33, "\x90\x00\x5a"}, {0x33, "\x8c\xa3\x4b"}, {0x33, "\x90\x00\xa6"},
+	{0x33, "\x8c\xa3\x61"}, {0x33, "\x90\x00\xc8"}, {0x33, "\x8c\xa3\x62"},
+	{0x33, "\x90\x00\xe1"}, {0x34, "\xce\x01\xa8"}, {0x34, "\xd0\x66\x33"},
+	{0x34, "\xd2\x31\x9a"}, {0x34, "\xd4\x94\x63"}, {0x34, "\xd6\x4b\x25"},
+	{0x34, "\xd8\x26\x70"}, {0x34, "\xda\x72\x4c"}, {0x34, "\xdc\xff\x04"},
+	{0x34, "\xde\x01\x5b"}, {0x34, "\xe6\x01\x13"}, {0x34, "\xee\x0b\xf0"},
+	{0x34, "\xf6\x0b\xa4"}, {0x35, "\x00\xf6\xe7"}, {0x35, "\x08\x0d\xfd"},
+	{0x35, "\x10\x25\x63"}, {0x35, "\x18\x35\x6c"}, {0x35, "\x20\x42\x7e"},
+	{0x35, "\x28\x19\x44"}, {0x35, "\x30\x39\xd4"}, {0x35, "\x38\xf5\xa8"},
+	{0x35, "\x4c\x07\x90"}, {0x35, "\x44\x07\xb8"}, {0x35, "\x5c\x06\x88"},
+	{0x35, "\x54\x07\xff"}, {0x34, "\xe0\x01\x52"}, {0x34, "\xe8\x00\xcc"},
+	{0x34, "\xf0\x0d\x83"}, {0x34, "\xf8\x0c\xb3"}, {0x35, "\x02\xfe\xba"},
+	{0x35, "\x0a\x04\xe0"}, {0x35, "\x12\x1c\x63"}, {0x35, "\x1a\x2b\x5a"},
+	{0x35, "\x22\x32\x5e"}, {0x35, "\x2a\x0d\x28"}, {0x35, "\x32\x2c\x02"},
+	{0x35, "\x3a\xf4\xfa"}, {0x35, "\x4e\x07\xef"}, {0x35, "\x46\x07\x88"},
+	{0x35, "\x5e\x07\xc1"}, {0x35, "\x56\x04\x64"}, {0x34, "\xe4\x01\x15"},
+	{0x34, "\xec\x00\x82"}, {0x34, "\xf4\x0c\xce"}, {0x34, "\xfc\x0c\xba"},
+	{0x35, "\x06\x1f\x02"}, {0x35, "\x0e\x02\xe3"}, {0x35, "\x16\x1a\x50"},
+	{0x35, "\x1e\x24\x39"}, {0x35, "\x26\x23\x4c"}, {0x35, "\x2e\xf9\x1b"},
+	{0x35, "\x36\x23\x19"}, {0x35, "\x3e\x12\x08"}, {0x35, "\x52\x07\x22"},
+	{0x35, "\x4a\x03\xd3"}, {0x35, "\x62\x06\x54"}, {0x35, "\x5a\x04\x5d"},
+	{0x34, "\xe2\x01\x04"}, {0x34, "\xea\x00\xa0"}, {0x34, "\xf2\x0c\xbc"},
+	{0x34, "\xfa\x0c\x5b"}, {0x35, "\x04\x17\xf2"}, {0x35, "\x0c\x02\x08"},
+	{0x35, "\x14\x28\x43"}, {0x35, "\x1c\x28\x62"}, {0x35, "\x24\x2b\x60"},
+	{0x35, "\x2c\x07\x33"}, {0x35, "\x34\x1f\xb0"}, {0x35, "\x3c\xed\xcd"},
+	{0x35, "\x50\x00\x06"}, {0x35, "\x48\x07\xff"}, {0x35, "\x60\x05\x89"},
+	{0x35, "\x58\x07\xff"}, {0x35, "\x40\x00\xa0"}, {0x35, "\x42\x00\x00"},
+	{0x32, "\x10\x01\xfc"}, {0x33, "\x8c\xa1\x18"}, {0x33, "\x90\x00\x3c"},
+	{1, "\xff\xff\xff"},
+	{0x33, "\x78\x00\x00"},
+	{1, "\xff\xff\xff"},
+	{0x35, "\xb8\x1f\x20"}, {0x33, "\x8c\xa2\x06"}, {0x33, "\x90\x00\x10"},
+	{0x33, "\x8c\xa2\x07"}, {0x33, "\x90\x00\x08"}, {0x33, "\x8c\xa2\x42"},
+	{0x33, "\x90\x00\x0b"}, {0x33, "\x8c\xa2\x4a"}, {0x33, "\x90\x00\x8c"},
+	{0x35, "\xba\xfa\x08"}, {0x33, "\x8c\xa2\x02"}, {0x33, "\x90\x00\x22"},
+	{0x33, "\x8c\xa2\x03"}, {0x33, "\x90\x00\xbb"},
+};
+
+static struct idxdata tbl_common_d[] = {
+	{0x33, "\x8c\x22\x2e"}, {0x33, "\x90\x00\xa0"}, {0x33, "\x8c\xa4\x08"},
+	{0x33, "\x90\x00\x1f"}, {0x33, "\x8c\xa4\x09"}, {0x33, "\x90\x00\x21"},
+	{0x33, "\x8c\xa4\x0a"}, {0x33, "\x90\x00\x25"}, {0x33, "\x8c\xa4\x0b"},
+	{0x33, "\x90\x00\x27"}, {0x33, "\x8c\x24\x11"}, {0x33, "\x90\x00\xa0"},
+	{0x33, "\x8c\x24\x13"}, {0x33, "\x90\x00\xc0"}, {0x33, "\x8c\x24\x15"},
+	{0x33, "\x90\x00\xa0"}, {0x33, "\x8c\x24\x17"}, {0x33, "\x90\x00\xc0"},
+};
+
+static struct idxdata tbl_common_e[] = {
+	{0x33, "\x8c\xa4\x04"}, {0x33, "\x90\x00\x80"}, {0x33, "\x8c\xa7\x9d"},
+	{0x33, "\x90\x00\x00"}, {0x33, "\x8c\xa7\x9e"}, {0x33, "\x90\x00\x00"},
+	{0x33, "\x8c\xa2\x0c"}, {0x33, "\x90\x00\x17"}, {0x33, "\x8c\xa2\x15"},
+	{0x33, "\x90\x00\x04"}, {0x33, "\x8c\xa2\x14"}, {0x33, "\x90\x00\x20"},
+	{0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x17"},
+	/* msleep(53); */
+	{0x33, "\x90\x21\x11"}, {0x33, "\x8c\x27\x1b"}, {0x33, "\x90\x02\x4f"},
+	{0x33, "\x8c\x27\x25"}, {0x33, "\x90\x06\x0f"}, {0x33, "\x8c\x27\x39"},
+	{0x33, "\x90\x21\x11"}, {0x33, "\x8c\x27\x3d"}, {0x33, "\x90\x01\x20"},
+	{0x33, "\x8c\x27\x47"}, {0x33, "\x90\x09\x4c"}, {0x33, "\x8c\x27\x03"},
+	{0x33, "\x90\x02\x84"}, {0x33, "\x8c\x27\x05"}, {0x33, "\x90\x01\xe2"},
+	{0x33, "\x8c\x27\x07"}, {0x33, "\x90\x06\x40"}, {0x33, "\x8c\x27\x09"},
+	{0x33, "\x90\x04\xb0"}, {0x33, "\x8c\x27\x0d"}, {0x33, "\x90\x00\x00"},
+	{0x33, "\x8c\x27\x0f"}, {0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x11"},
+	{0x33, "\x90\x04\xbd"}, {0x33, "\x8c\x27\x13"}, {0x33, "\x90\x06\x4d"},
+	{0x33, "\x8c\x27\x15"}, {0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x17"},
+	{0x33, "\x90\x21\x11"}, {0x33, "\x8c\x27\x19"}, {0x33, "\x90\x04\x6c"},
+	{0x33, "\x8c\x27\x1b"}, {0x33, "\x90\x02\x4f"}, {0x33, "\x8c\x27\x1d"},
+	{0x33, "\x90\x01\x02"}, {0x33, "\x8c\x27\x1f"}, {0x33, "\x90\x02\x79"},
+	{0x33, "\x8c\x27\x21"}, {0x33, "\x90\x01\x55"}, {0x33, "\x8c\x27\x23"},
+	{0x33, "\x90\x02\x85"}, {0x33, "\x8c\x27\x25"}, {0x33, "\x90\x06\x0f"},
+	{0x33, "\x8c\x27\x27"}, {0x33, "\x90\x20\x20"}, {0x33, "\x8c\x27\x29"},
+	{0x33, "\x90\x20\x20"}, {0x33, "\x8c\x27\x2b"}, {0x33, "\x90\x10\x20"},
+	{0x33, "\x8c\x27\x2d"}, {0x33, "\x90\x20\x07"}, {0x33, "\x8c\x27\x2f"},
+	{0x33, "\x90\x00\x04"}, {0x33, "\x8c\x27\x31"}, {0x33, "\x90\x00\x04"},
+	{0x33, "\x8c\x27\x33"}, {0x33, "\x90\x04\xbb"}, {0x33, "\x8c\x27\x35"},
+	{0x33, "\x90\x06\x4b"}, {0x33, "\x8c\x27\x37"}, {0x33, "\x90\x00\x00"},
+	{0x33, "\x8c\x27\x39"}, {0x33, "\x90\x21\x11"}, {0x33, "\x8c\x27\x3b"},
+	{0x33, "\x90\x00\x24"}, {0x33, "\x8c\x27\x3d"}, {0x33, "\x90\x01\x20"},
+	{0x33, "\x8c\x27\x41"}, {0x33, "\x90\x01\x69"}, {0x33, "\x8c\x27\x45"},
+	{0x33, "\x90\x04\xed"}, {0x33, "\x8c\x27\x47"}, {0x33, "\x90\x09\x4c"},
+	{0x33, "\x8c\x27\x51"}, {0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x53"},
+	{0x33, "\x90\x03\x20"}, {0x33, "\x8c\x27\x55"}, {0x33, "\x90\x00\x00"},
+	{0x33, "\x8c\x27\x57"}, {0x33, "\x90\x02\x58"}, {0x33, "\x8c\x27\x5f"},
+	{0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x61"}, {0x33, "\x90\x06\x40"},
+	{0x33, "\x8c\x27\x63"}, {0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x65"},
+	{0x33, "\x90\x04\xb0"}, {0x33, "\x8c\x22\x2e"}, {0x33, "\x90\x00\xa1"},
+	{0x33, "\x8c\xa4\x08"}, {0x33, "\x90\x00\x1f"}, {0x33, "\x8c\xa4\x09"},
+	{0x33, "\x90\x00\x21"}, {0x33, "\x8c\xa4\x0a"}, {0x33, "\x90\x00\x25"},
+	{0x33, "\x8c\xa4\x0b"}, {0x33, "\x90\x00\x27"}, {0x33, "\x8c\x24\x11"},
+	{0x33, "\x90\x00\xa1"}, {0x33, "\x8c\x24\x13"}, {0x33, "\x90\x00\xc1"},
+	{0x33, "\x8c\x24\x15"},
+};
+
+static struct validx tbl_init_at_startup[] = {
+	{0x0000, 0x0000},
+	{53, 0xffff},
+	{0x0010, 0x0010},
+	{53, 0xffff},
+	{0x0008, 0x00c0},
+	{53, 0xffff},
+	{0x0001, 0x00c1},
+	{53, 0xffff},
+	{0x0001, 0x00c2},
+	{53, 0xffff},
+	{0x0020, 0x0006},
+	{53, 0xffff},
+	{0x006a, 0x000d},
+	{53, 0xffff},
+};
+
+static struct idxdata tbl_init_post_alt_low_a[] = {
+	{0x33, "\x8c\x27\x15"}, {0x33, "\x90\x00\x25"}, {0x33, "\x8c\x22\x2e"},
+	{0x33, "\x90\x00\x81"}, {0x33, "\x8c\xa4\x08"}, {0x33, "\x90\x00\x17"},
+	{0x33, "\x8c\xa4\x09"}, {0x33, "\x90\x00\x1a"}, {0x33, "\x8c\xa4\x0a"},
+	{0x33, "\x90\x00\x1d"}, {0x33, "\x8c\xa4\x0b"}, {0x33, "\x90\x00\x20"},
+	{0x33, "\x8c\x24\x11"}, {0x33, "\x90\x00\x81"}, {0x33, "\x8c\x24\x13"},
+	{0x33, "\x90\x00\x9b"},
+};
+
+static struct idxdata tbl_init_post_alt_low_b[] = {
+	{0x33, "\x8c\x27\x03"}, {0x33, "\x90\x03\x24"}, {0x33, "\x8c\x27\x05"},
+	{0x33, "\x90\x02\x58"}, {0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x05"},
+	{2, "\xff\xff\xff"},
+	{0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x06"},
+	{2, "\xff\xff\xff"},
+};
+
+static struct idxdata tbl_init_post_alt_low_c[] = {
+	{0x34, "\x1e\x8f\x09"}, {0x34, "\x1c\x01\x28"}, {0x34, "\x1e\x8f\x09"},
+	{2, "\xff\xff\xff"},
+	{0x34, "\x1e\x8f\x09"}, {0x32, "\x14\x06\xe6"}, {0x33, "\x8c\xa1\x20"},
+	{0x33, "\x90\x00\x00"}, {0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x01"},
+	{0x33, "\x2e\x01\x00"}, {0x34, "\x04\x00\x2a"}, {0x33, "\x8c\xa7\x02"},
+	{0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x95"}, {0x33, "\x90\x01\x00"},
+	{2, "\xff\xff\xff"},
+	{0x33, "\x8c\xa1\x20"}, {0x33, "\x90\x00\x72"}, {0x33, "\x8c\xa1\x03"},
+	{0x33, "\x90\x00\x02"}, {0x33, "\x8c\xa7\x02"}, {0x33, "\x90\x00\x01"},
+	{2, "\xff\xff\xff"},
+	{0x33, "\x8c\xa1\x20"}, {0x33, "\x90\x00\x00"}, {0x33, "\x8c\xa1\x03"},
+	{0x33, "\x90\x00\x01"}, {0x33, "\x8c\xa7\x02"}, {0x33, "\x90\x00\x00"},
+	{2, "\xff\xff\xff"}, /* - * */
+	{0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x05"},
+	{2, "\xff\xff\xff"},
+	{0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x06"},
+	{2, "\xff\xff\xff"},
+	{0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x05"},
+	{2, "\xff\xff\xff"},
+	{0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x06"},
+	{1, "\xff\xff\xff"},
+};
+
+static struct idxdata tbl_init_post_alt_low_d[] = {
+	{0x32, "\x10\x01\xf8"}, {0x34, "\xce\x01\xa8"}, {0x34, "\xd0\x66\x33"},
+	{0x34, "\xd2\x31\x9a"}, {0x34, "\xd4\x94\x63"}, {0x34, "\xd6\x4b\x25"},
+	{0x34, "\xd8\x26\x70"}, {0x34, "\xda\x72\x4c"}, {0x34, "\xdc\xff\x04"},
+	{0x34, "\xde\x01\x5b"}, {0x34, "\xe6\x01\x13"}, {0x34, "\xee\x0b\xf0"},
+	{0x34, "\xf6\x0b\xa4"}, {0x35, "\x00\xf6\xe7"}, {0x35, "\x08\x0d\xfd"},
+	{0x35, "\x10\x25\x63"}, {0x35, "\x18\x35\x6c"}, {0x35, "\x20\x42\x7e"},
+	{0x35, "\x28\x19\x44"}, {0x35, "\x30\x39\xd4"}, {0x35, "\x38\xf5\xa8"},
+	{0x35, "\x4c\x07\x90"}, {0x35, "\x44\x07\xb8"}, {0x35, "\x5c\x06\x88"},
+	{0x35, "\x54\x07\xff"}, {0x34, "\xe0\x01\x52"}, {0x34, "\xe8\x00\xcc"},
+	{0x34, "\xf0\x0d\x83"}, {0x34, "\xf8\x0c\xb3"}, {0x35, "\x02\xfe\xba"},
+	{0x35, "\x0a\x04\xe0"}, {0x35, "\x12\x1c\x63"}, {0x35, "\x1a\x2b\x5a"},
+	{0x35, "\x22\x32\x5e"}, {0x35, "\x2a\x0d\x28"}, {0x35, "\x32\x2c\x02"},
+	{0x35, "\x3a\xf4\xfa"}, {0x35, "\x4e\x07\xef"}, {0x35, "\x46\x07\x88"},
+	{0x35, "\x5e\x07\xc1"}, {0x35, "\x56\x04\x64"}, {0x34, "\xe4\x01\x15"},
+	{0x34, "\xec\x00\x82"}, {0x34, "\xf4\x0c\xce"}, {0x34, "\xfc\x0c\xba"},
+	{0x35, "\x06\x1f\x02"}, {0x35, "\x0e\x02\xe3"}, {0x35, "\x16\x1a\x50"},
+	{0x35, "\x1e\x24\x39"}, {0x35, "\x26\x23\x4c"}, {0x35, "\x2e\xf9\x1b"},
+	{0x35, "\x36\x23\x19"}, {0x35, "\x3e\x12\x08"}, {0x35, "\x52\x07\x22"},
+	{0x35, "\x4a\x03\xd3"}, {0x35, "\x62\x06\x54"}, {0x35, "\x5a\x04\x5d"},
+	{0x34, "\xe2\x01\x04"}, {0x34, "\xea\x00\xa0"}, {0x34, "\xf2\x0c\xbc"},
+	{0x34, "\xfa\x0c\x5b"}, {0x35, "\x04\x17\xf2"}, {0x35, "\x0c\x02\x08"},
+	{0x35, "\x14\x28\x43"}, {0x35, "\x1c\x28\x62"}, {0x35, "\x24\x2b\x60"},
+	{0x35, "\x2c\x07\x33"}, {0x35, "\x34\x1f\xb0"}, {0x35, "\x3c\xed\xcd"},
+	{0x35, "\x50\x00\x06"}, {0x35, "\x48\x07\xff"}, {0x35, "\x60\x05\x89"},
+	{0x35, "\x58\x07\xff"}, {0x35, "\x40\x00\xa0"}, {0x35, "\x42\x00\x00"},
+	{0x32, "\x10\x01\xfc"}, {0x33, "\x8c\xa1\x18"},
+	/* Flip/Mirror h/v=1 */
+	{0x33, "\x90\x00\x3c"}, {0x33, "\x8c\x27\x19"}, {0x33, "\x90\x04\x6c"},
+	{0x33, "\x8c\x27\x3b"}, {0x33, "\x90\x00\x24"}, {0x33, "\x8c\xa1\x03"},
+	{0x33, "\x90\x00\x06"},
+	{130, "\xff\xff\xff"},
+	{0x33, "\x90\x00\x06"}, {0x33, "\x90\x00\x06"}, {0x33, "\x90\x00\x06"},
+	{0x33, "\x90\x00\x06"}, {0x33, "\x90\x00\x06"}, {0x33, "\x90\x00\x06"},
+	{100, "\xff\xff\xff"},
+	/* ?? */
+	{0x33, "\x8c\xa1\x02"}, {0x33, "\x90\x00\x1f"}, {0x33, "\x8c\xa1\x02"},
+	{0x33, "\x90\x00\x1f"}, {0x33, "\x8c\xa1\x02"}, {0x33, "\x90\x00\x1f"},
+	{0x33, "\x8c\xa1\x02"}, {0x33, "\x90\x00\x1f"},
+	/* Brigthness=70 */
+	{0x33, "\x8c\xa2\x06"}, {0x33, "\x90\x00\x46"}, {0x33, "\x8c\xa1\x02"},
+	{0x33, "\x90\x00\x0f"}, {0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x05"},
+	/* Sharpness=20 */
+	{0x32, "\x6c\x14\x08"},
+};
+
+static struct idxdata tbl_init_post_alt_big_a[] = {
+	{0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x05"},
+	{2, "\xff\xff\xff"},
+	{0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x06"},
+	{2, "\xff\xff\xff"},
+	{0x34, "\x1e\x8f\x09"}, {0x34, "\x1c\x01\x28"}, {0x34, "\x1e\x8f\x09"},
+	{0x34, "\x1e\x8f\x09"}, {0x32, "\x14\x06\xe6"}, {0x33, "\x8c\xa1\x03"},
+	{0x33, "\x90\x00\x05"},
+	{2, "\xff\xff\xff"},
+	{0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x06"},
+	{2, "\xff\xff\xff"},
+	{0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x05"},
+	{2, "\xff\xff\xff"},
+	{0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x06"}, {0x33, "\x8c\xa1\x20"},
+	{0x33, "\x90\x00\x72"}, {0x33, "\x8c\xa1\x30"}, {0x33, "\x90\x00\x03"},
+	{0x33, "\x8c\xa1\x31"}, {0x33, "\x90\x00\x02"}, {0x33, "\x8c\xa1\x32"},
+	{0x33, "\x90\x00\x03"}, {0x33, "\x8c\xa1\x34"}, {0x33, "\x90\x00\x03"},
+	{0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x02"}, {0x33, "\x2e\x01\x00"},
+	{0x34, "\x04\x00\x2a"}, {0x33, "\x8c\xa7\x02"}, {0x33, "\x90\x00\x01"},
+};
+
+static struct idxdata tbl_init_post_alt_big_b[] = {
+	{0x32, "\x10\x01\xf8"}, {0x34, "\xce\x01\xa8"}, {0x34, "\xd0\x66\x33"},
+	{0x34, "\xd2\x31\x9a"}, {0x34, "\xd4\x94\x63"}, {0x34, "\xd6\x4b\x25"},
+	{0x34, "\xd8\x26\x70"}, {0x34, "\xda\x72\x4c"}, {0x34, "\xdc\xff\x04"},
+	{0x34, "\xde\x01\x5b"}, {0x34, "\xe6\x01\x13"}, {0x34, "\xee\x0b\xf0"},
+	{0x34, "\xf6\x0b\xa4"}, {0x35, "\x00\xf6\xe7"}, {0x35, "\x08\x0d\xfd"},
+	{0x35, "\x10\x25\x63"}, {0x35, "\x18\x35\x6c"}, {0x35, "\x20\x42\x7e"},
+	{0x35, "\x28\x19\x44"}, {0x35, "\x30\x39\xd4"}, {0x35, "\x38\xf5\xa8"},
+	{0x35, "\x4c\x07\x90"}, {0x35, "\x44\x07\xb8"}, {0x35, "\x5c\x06\x88"},
+	{0x35, "\x54\x07\xff"}, {0x34, "\xe0\x01\x52"}, {0x34, "\xe8\x00\xcc"},
+	{0x34, "\xf0\x0d\x83"}, {0x34, "\xf8\x0c\xb3"}, {0x35, "\x02\xfe\xba"},
+	{0x35, "\x0a\x04\xe0"}, {0x35, "\x12\x1c\x63"}, {0x35, "\x1a\x2b\x5a"},
+	{0x35, "\x22\x32\x5e"}, {0x35, "\x2a\x0d\x28"}, {0x35, "\x32\x2c\x02"},
+	{0x35, "\x3a\xf4\xfa"}, {0x35, "\x4e\x07\xef"}, {0x35, "\x46\x07\x88"},
+	{0x35, "\x5e\x07\xc1"}, {0x35, "\x56\x04\x64"}, {0x34, "\xe4\x01\x15"},
+	{0x34, "\xec\x00\x82"}, {0x34, "\xf4\x0c\xce"}, {0x34, "\xfc\x0c\xba"},
+	{0x35, "\x06\x1f\x02"}, {0x35, "\x0e\x02\xe3"}, {0x35, "\x16\x1a\x50"},
+	{0x35, "\x1e\x24\x39"}, {0x35, "\x26\x23\x4c"}, {0x35, "\x2e\xf9\x1b"},
+	{0x35, "\x36\x23\x19"}, {0x35, "\x3e\x12\x08"}, {0x35, "\x52\x07\x22"},
+	{0x35, "\x4a\x03\xd3"}, {0x35, "\x62\x06\x54"}, {0x35, "\x5a\x04\x5d"},
+	{0x34, "\xe2\x01\x04"}, {0x34, "\xea\x00\xa0"}, {0x34, "\xf2\x0c\xbc"},
+	{0x34, "\xfa\x0c\x5b"}, {0x35, "\x04\x17\xf2"}, {0x35, "\x0c\x02\x08"},
+	{0x35, "\x14\x28\x43"}, {0x35, "\x1c\x28\x62"}, {0x35, "\x24\x2b\x60"},
+	{0x35, "\x2c\x07\x33"}, {0x35, "\x34\x1f\xb0"}, {0x35, "\x3c\xed\xcd"},
+	{0x35, "\x50\x00\x06"}, {0x35, "\x48\x07\xff"}, {0x35, "\x60\x05\x89"},
+	{0x35, "\x58\x07\xff"}, {0x35, "\x40\x00\xa0"}, {0x35, "\x42\x00\x00"},
+	{0x32, "\x10\x01\xfc"}, {0x33, "\x8c\xa1\x18"}, {0x33, "\x90\x00\x3c"},
+};
+
+static struct idxdata tbl_init_post_alt_big_c[] = {
+	{0x33, "\x8c\xa1\x02"},
+	{0x33, "\x90\x00\x1f"},
+	{0x33, "\x8c\xa1\x02"},
+	{0x33, "\x90\x00\x1f"},
+	{0x33, "\x8c\xa1\x02"},
+	{0x33, "\x90\x00\x1f"},
+	{0x33, "\x8c\xa1\x02"},
+	{0x33, "\x90\x00\x1f"},
+};
+
+static u8 *dat_640  = "\xd0\x02\xd1\x08\xd2\xe1\xd3\x02\xd4\x10\xd5\x81";
+static u8 *dat_800  = "\xd0\x02\xd1\x10\xd2\x57\xd3\x02\xd4\x18\xd5\x21";
+static u8 *dat_1280 = "\xd0\x02\xd1\x20\xd2\x01\xd3\x02\xd4\x28\xd5\x01";
+static u8 *dat_1600 = "\xd0\x02\xd1\x20\xd2\xaf\xd3\x02\xd4\x30\xd5\x41";
+
+static int  mi2020_init_at_startup(struct gspca_dev *gspca_dev);
+static int  mi2020_configure_alt(struct gspca_dev *gspca_dev);
+static int  mi2020_init_pre_alt(struct gspca_dev *gspca_dev);
+static int  mi2020_init_post_alt(struct gspca_dev *gspca_dev);
+static void mi2020_post_unset_alt(struct gspca_dev *gspca_dev);
+static int  mi2020_camera_settings(struct gspca_dev *gspca_dev);
+/*==========================================================================*/
+
+void mi2020_init_settings(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->vcur.backlight  =  0;
+	sd->vcur.brightness = 70;
+	sd->vcur.sharpness  = 20;
+	sd->vcur.contrast   =  0;
+	sd->vcur.gamma      =  0;
+	sd->vcur.hue        =  0;
+	sd->vcur.saturation = 60;
+	sd->vcur.whitebal   = 50;
+	sd->vcur.mirror = 0;
+	sd->vcur.flip   = 0;
+	sd->vcur.AC50Hz = 1;
+
+	sd->vmax.backlight  =  64;
+	sd->vmax.brightness = 128;
+	sd->vmax.sharpness  =  40;
+	sd->vmax.contrast   =   3;
+	sd->vmax.gamma      =   2;
+	sd->vmax.hue        =   0 + 1; /* 200 */
+	sd->vmax.saturation =   0;     /* 100 */
+	sd->vmax.whitebal   =   0;     /* 100 */
+	sd->vmax.mirror = 1;
+	sd->vmax.flip   = 1;
+	sd->vmax.AC50Hz = 1;
+	if (_MI2020b_) {
+		sd->vmax.contrast  = 0;
+		sd->vmax.gamma     = 0;
+		sd->vmax.backlight = 0;
+	}
+
+	sd->dev_camera_settings = mi2020_camera_settings;
+	sd->dev_init_at_startup = mi2020_init_at_startup;
+	sd->dev_configure_alt   = mi2020_configure_alt;
+	sd->dev_init_pre_alt    = mi2020_init_pre_alt;
+	sd->dev_post_unset_alt  = mi2020_post_unset_alt;
+}
+
+/*==========================================================================*/
+
+static void common(struct gspca_dev *gspca_dev)
+{
+	s32 reso = gspca_dev->cam.cam_mode[(s32) gspca_dev->curr_mode].priv;
+
+	if (_MI2020b_) {
+		fetch_validx(gspca_dev, tbl_common_a, ARRAY_SIZE(tbl_common_a));
+	} else {
+		if (_MI2020_)
+			ctrl_out(gspca_dev, 0x40,  1, 0x0008, 0x0004,  0, NULL);
+		else
+			ctrl_out(gspca_dev, 0x40,  1, 0x0002, 0x0004,  0, NULL);
+		msleep(35);
+		fetch_validx(gspca_dev, tbl_common_b, ARRAY_SIZE(tbl_common_b));
+	}
+	ctrl_out(gspca_dev, 0x40,  3, 0x7a00, 0x0033,  3, "\x86\x25\x01");
+	ctrl_out(gspca_dev, 0x40,  3, 0x7a00, 0x0033,  3, "\x86\x25\x00");
+	msleep(2); /* - * */
+	ctrl_out(gspca_dev, 0x40,  3, 0x7a00, 0x0030,  3, "\x1a\x0a\xcc");
+	if (reso == IMAGE_1600)
+		msleep(2); /* 1600 */
+	fetch_idxdata(gspca_dev, tbl_common_c, ARRAY_SIZE(tbl_common_c));
+
+	if (_MI2020b_ || _MI2020_)
+		fetch_idxdata(gspca_dev, tbl_common_d,
+				ARRAY_SIZE(tbl_common_d));
+
+	fetch_idxdata(gspca_dev, tbl_common_e, ARRAY_SIZE(tbl_common_e));
+	if (_MI2020b_ || _MI2020_) {
+		/* Different from fret */
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x78");
+		/* Same as fret */
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\x24\x17");
+		/* Different from fret */
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x90");
+	} else {
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x6a");
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\x24\x17");
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x80");
+	}
+	ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa1\x03");
+	ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x05");
+	msleep(2);
+	ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa1\x03");
+	if (reso == IMAGE_1600)
+		msleep(14); /* 1600 */
+	ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x06");
+	msleep(2);
+}
+
+static int mi2020_init_at_startup(struct gspca_dev *gspca_dev)
+{
+	u8 c;
+
+	ctrl_in(gspca_dev, 0xc0, 2, 0x0000, 0x0004, 1, &c);
+	ctrl_in(gspca_dev, 0xc0, 2, 0x0000, 0x0004, 1, &c);
+
+	fetch_validx(gspca_dev, tbl_init_at_startup,
+			ARRAY_SIZE(tbl_init_at_startup));
+
+	common(gspca_dev);
+
+	return 0;
+}
+
+static int mi2020_init_pre_alt(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->mirrorMask = 0;
+
+	sd->vold.backlight  = -1;
+	sd->vold.brightness = -1;
+	sd->vold.sharpness  = -1;
+	sd->vold.contrast   = -1;
+	sd->vold.gamma  = -1;
+	sd->vold.hue    = -1;
+	sd->vold.mirror = -1;
+	sd->vold.flip   = -1;
+	sd->vold.AC50Hz = -1;
+
+	mi2020_init_post_alt(gspca_dev);
+
+	return 0;
+}
+
+static int mi2020_init_post_alt(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 reso = gspca_dev->cam.cam_mode[(s32) gspca_dev->curr_mode].priv;
+
+	s32 backlight = sd->vcur.backlight;
+	s32 mirror = (((sd->vcur.mirror > 0) ^ sd->mirrorMask) > 0);
+	s32 flip   = (((sd->vcur.flip   > 0) ^ sd->mirrorMask) > 0);
+	s32 freq   = (sd->vcur.AC50Hz  > 0);
+
+	u8 dat_freq2[] = {0x90, 0x00, 0x80};
+	u8 dat_multi1[] = {0x8c, 0xa7, 0x00};
+	u8 dat_multi2[] = {0x90, 0x00, 0x00};
+	u8 dat_multi3[] = {0x8c, 0xa7, 0x00};
+	u8 dat_multi4[] = {0x90, 0x00, 0x00};
+	u8 dat_hvflip2[] = {0x90, 0x04, 0x6c};
+	u8 dat_hvflip4[] = {0x90, 0x00, 0x24};
+	u8 c;
+
+	sd->nbIm = -1;
+
+	dat_freq2[2] = freq ? 0xc0 : 0x80;
+	dat_multi1[2] = 0x9d;
+	dat_multi3[2] = dat_multi1[2] + 1;
+	dat_multi4[2] = dat_multi2[2] = backlight;
+	dat_hvflip2[2] = 0x6c + 2 * (1 - flip) + (1 - mirror);
+	dat_hvflip4[2] = 0x24 + 2 * (1 - flip) + (1 - mirror);
+
+	msleep(200);
+
+	ctrl_out(gspca_dev, 0x40, 5, 0x0001, 0x0000, 0, NULL);
+	msleep(3); /* 35 * */
+
+	common(gspca_dev);
+
+	ctrl_out(gspca_dev, 0x40,  1, 0x0041, 0x0000,  0, NULL);
+	msleep(70);
+
+	if (_MI2020b_)
+		ctrl_out(gspca_dev, 0x40,  1, 0x0040, 0x0000,  0, NULL);
+
+	ctrl_out(gspca_dev, 0x40,  1, 0x0010, 0x0010,  0, NULL);
+	ctrl_out(gspca_dev, 0x40,  1, 0x0003, 0x00c1,  0, NULL);
+	ctrl_out(gspca_dev, 0x40,  1, 0x0042, 0x00c2,  0, NULL);
+	ctrl_out(gspca_dev, 0x40,  1, 0x006a, 0x000d,  0, NULL);
+
+	switch (reso) {
+	case IMAGE_640:
+	case IMAGE_800:
+		if (reso != IMAGE_800)
+			ctrl_out(gspca_dev, 0x40,  3, 0x0000, 0x0200,
+				12, dat_640);
+		else
+			ctrl_out(gspca_dev, 0x40,  3, 0x0000, 0x0200,
+				12, dat_800);
+
+		if (_MI2020c_)
+			fetch_idxdata(gspca_dev, tbl_init_post_alt_low_a,
+					ARRAY_SIZE(tbl_init_post_alt_low_a));
+
+		if (reso == IMAGE_800)
+			fetch_idxdata(gspca_dev, tbl_init_post_alt_low_b,
+					ARRAY_SIZE(tbl_init_post_alt_low_b));
+
+		fetch_idxdata(gspca_dev, tbl_init_post_alt_low_c,
+				ARRAY_SIZE(tbl_init_post_alt_low_c));
+
+		if (_MI2020b_) {
+			ctrl_out(gspca_dev, 0x40, 1, 0x0001, 0x0010, 0, NULL);
+			ctrl_out(gspca_dev, 0x40, 1, 0x0000, 0x00c1, 0, NULL);
+			ctrl_out(gspca_dev, 0x40, 1, 0x0041, 0x00c2, 0, NULL);
+			msleep(150);
+		} else if (_MI2020c_) {
+			ctrl_out(gspca_dev, 0x40, 1, 0x0010, 0x0010, 0, NULL);
+			ctrl_out(gspca_dev, 0x40, 1, 0x0000, 0x00c1, 0, NULL);
+			ctrl_out(gspca_dev, 0x40, 1, 0x0041, 0x00c2, 0, NULL);
+			msleep(120);
+			ctrl_out(gspca_dev, 0x40, 1, 0x0040, 0x0000, 0, NULL);
+			msleep(30);
+		} else if (_MI2020_) {
+			ctrl_out(gspca_dev, 0x40, 1, 0x0001, 0x0010, 0, NULL);
+			ctrl_out(gspca_dev, 0x40, 1, 0x0000, 0x00c1, 0, NULL);
+			ctrl_out(gspca_dev, 0x40, 1, 0x0041, 0x00c2, 0, NULL);
+			msleep(120);
+			ctrl_out(gspca_dev, 0x40, 1, 0x0040, 0x0000, 0, NULL);
+			msleep(30);
+		}
+
+		/* AC power frequency */
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_freq1);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_freq2);
+		msleep(20);
+		/* backlight */
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi1);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi2);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi3);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi4);
+		/* at init time but not after */
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa2\x0c");
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x17");
+		/* finish the backlight */
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi5);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi6);
+		msleep(5);/* " */
+
+		if (_MI2020c_) {
+			fetch_idxdata(gspca_dev, tbl_init_post_alt_low_d,
+					ARRAY_SIZE(tbl_init_post_alt_low_d));
+		} else {
+			ctrl_in(gspca_dev, 0xc0, 2, 0x0000, 0x0000, 1, &c);
+			msleep(14); /* 0xd8 */
+
+			/* flip/mirror */
+			ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033,
+					3, dat_hvflip1);
+			ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033,
+					3, dat_hvflip2);
+			ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033,
+					3, dat_hvflip3);
+			ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033,
+					3, dat_hvflip4);
+			ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033,
+					3, dat_hvflip5);
+			ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033,
+					3, dat_hvflip6);
+			msleep(21);
+			ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033,
+					3, dat_dummy1);
+			msleep(5);
+			ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033,
+					3, dat_dummy1);
+			msleep(5);
+			ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033,
+					3, dat_dummy1);
+			msleep(5);
+			ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033,
+					3, dat_dummy1);
+			msleep(5);
+			ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033,
+					3, dat_dummy1);
+			msleep(5);
+			ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033,
+					3, dat_dummy1);
+			/* end of flip/mirror main part */
+			msleep(246); /* 146 */
+
+			sd->nbIm = 0;
+		}
+		break;
+
+	case IMAGE_1280:
+	case IMAGE_1600:
+		if (reso == IMAGE_1280) {
+			ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200,
+					12, dat_1280);
+			ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033,
+					3, "\x8c\x27\x07");
+			ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033,
+					3, "\x90\x05\x04");
+			ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033,
+					3, "\x8c\x27\x09");
+			ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033,
+					3, "\x90\x04\x02");
+		} else {
+			ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200,
+					12, dat_1600);
+			ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033,
+					3, "\x8c\x27\x07");
+			ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033,
+					3, "\x90\x06\x40");
+			ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033,
+					3, "\x8c\x27\x09");
+			ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033,
+					3, "\x90\x04\xb0");
+		}
+
+		fetch_idxdata(gspca_dev, tbl_init_post_alt_big_a,
+				ARRAY_SIZE(tbl_init_post_alt_big_a));
+
+		if (reso == IMAGE_1600)
+			msleep(13); /* 1600 */
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\x27\x97");
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x01\x00");
+		msleep(53);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa1\x20");
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x00");
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa1\x03");
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x01");
+		if (reso == IMAGE_1600)
+			msleep(13); /* 1600 */
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa7\x02");
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x00");
+		msleep(53);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa1\x20");
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x72");
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa1\x03");
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x02");
+		if (reso == IMAGE_1600)
+			msleep(13); /* 1600 */
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa7\x02");
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x01");
+		msleep(53);
+
+		if (_MI2020b_) {
+			ctrl_out(gspca_dev, 0x40, 1, 0x0001, 0x0010, 0, NULL);
+			if (reso == IMAGE_1600)
+				msleep(500); /* 1600 */
+			ctrl_out(gspca_dev, 0x40, 1, 0x0000, 0x00c1, 0, NULL);
+			ctrl_out(gspca_dev, 0x40, 1, 0x0041, 0x00c2, 0, NULL);
+			msleep(1850);
+		} else if (_MI2020c_ || _MI2020_) {
+			ctrl_out(gspca_dev, 0x40, 1, 0x0001, 0x0010, 0, NULL);
+			ctrl_out(gspca_dev, 0x40, 1, 0x0000, 0x00c1, 0, NULL);
+			ctrl_out(gspca_dev, 0x40, 1, 0x0041, 0x00c2, 0, NULL);
+			msleep(1850);
+			ctrl_out(gspca_dev, 0x40, 1, 0x0040, 0x0000, 0, NULL);
+			msleep(30);
+		}
+
+		/* AC power frequency */
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_freq1);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_freq2);
+		msleep(20);
+		/* backlight */
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi1);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi2);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi3);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi4);
+		/* at init time but not after */
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa2\x0c");
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x17");
+		/* finish the backlight */
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi5);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi6);
+		msleep(6); /* " */
+
+		ctrl_in(gspca_dev, 0xc0, 2, 0x0000, 0x0000, 1, &c);
+		msleep(14);
+
+		if (_MI2020c_)
+			fetch_idxdata(gspca_dev, tbl_init_post_alt_big_b,
+					ARRAY_SIZE(tbl_init_post_alt_big_b));
+
+		/* flip/mirror */
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip1);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip2);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip3);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip4);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip5);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip6);
+		/* end of flip/mirror main part */
+		msleep(16);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa1\x03");
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x01");
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa1\x20");
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x00");
+		if (reso == IMAGE_1600)
+			msleep(25); /* 1600 */
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa7\x02");
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x00");
+		msleep(103);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa1\x03");
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x02");
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa1\x20");
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x72");
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa7\x02");
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x01");
+		sd->nbIm = 0;
+
+		if (_MI2020c_)
+			fetch_idxdata(gspca_dev, tbl_init_post_alt_big_c,
+					ARRAY_SIZE(tbl_init_post_alt_big_c));
+	}
+
+	sd->vold.mirror    = mirror;
+	sd->vold.flip      = flip;
+	sd->vold.AC50Hz    = freq;
+	sd->vold.backlight = backlight;
+
+	mi2020_camera_settings(gspca_dev);
+
+	return 0;
+}
+
+static int mi2020_configure_alt(struct gspca_dev *gspca_dev)
+{
+	s32 reso = gspca_dev->cam.cam_mode[(s32) gspca_dev->curr_mode].priv;
+
+	switch (reso) {
+	case IMAGE_640:
+		gspca_dev->alt = 3 + 1;
+		break;
+
+	case IMAGE_800:
+	case IMAGE_1280:
+	case IMAGE_1600:
+		gspca_dev->alt = 1 + 1;
+		break;
+	}
+	return 0;
+}
+
+int mi2020_camera_settings(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	s32 backlight = sd->vcur.backlight;
+	s32 bright =  sd->vcur.brightness;
+	s32 sharp  =  sd->vcur.sharpness;
+	s32 cntr   =  sd->vcur.contrast;
+	s32 gam	   =  sd->vcur.gamma;
+	s32 hue    = (sd->vcur.hue > 0);
+	s32 mirror = (((sd->vcur.mirror > 0) ^ sd->mirrorMask) > 0);
+	s32 flip   = (((sd->vcur.flip   > 0) ^ sd->mirrorMask) > 0);
+	s32 freq   = (sd->vcur.AC50Hz > 0);
+
+	u8 dat_sharp[] = {0x6c, 0x00, 0x08};
+	u8 dat_bright2[] = {0x90, 0x00, 0x00};
+	u8 dat_freq2[] = {0x90, 0x00, 0x80};
+	u8 dat_multi1[] = {0x8c, 0xa7, 0x00};
+	u8 dat_multi2[] = {0x90, 0x00, 0x00};
+	u8 dat_multi3[] = {0x8c, 0xa7, 0x00};
+	u8 dat_multi4[] = {0x90, 0x00, 0x00};
+	u8 dat_hvflip2[] = {0x90, 0x04, 0x6c};
+	u8 dat_hvflip4[] = {0x90, 0x00, 0x24};
+
+	/* Less than 4 images received -> too early to set the settings */
+	if (sd->nbIm < 4) {
+		sd->waitSet = 1;
+		return 0;
+	}
+	sd->waitSet = 0;
+
+	if (freq != sd->vold.AC50Hz) {
+		sd->vold.AC50Hz = freq;
+
+		dat_freq2[2] = freq ? 0xc0 : 0x80;
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_freq1);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_freq2);
+		msleep(20);
+	}
+
+	if (mirror != sd->vold.mirror || flip != sd->vold.flip) {
+		sd->vold.mirror = mirror;
+		sd->vold.flip   = flip;
+
+		dat_hvflip2[2] = 0x6c + 2 * (1 - flip) + (1 - mirror);
+		dat_hvflip4[2] = 0x24 + 2 * (1 - flip) + (1 - mirror);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip1);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip2);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip3);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip4);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip5);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip6);
+		msleep(130);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_dummy1);
+		msleep(6);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_dummy1);
+		msleep(6);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_dummy1);
+		msleep(6);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_dummy1);
+		msleep(6);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_dummy1);
+		msleep(6);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_dummy1);
+		msleep(6);
+
+		/* Sometimes present, sometimes not, useful? */
+		/* ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dummy2);
+		 * ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dummy3);
+		 * ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dummy2);
+		 * ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dummy3);
+		 * ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dummy2);
+		 * ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dummy3);
+		 * ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dummy2);
+		 * ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dummy3);*/
+	}
+
+	if (backlight != sd->vold.backlight) {
+		sd->vold.backlight = backlight;
+		if (backlight < 0 || backlight > sd->vmax.backlight)
+			backlight = 0;
+
+		dat_multi1[2] = 0x9d;
+		dat_multi3[2] = dat_multi1[2] + 1;
+		dat_multi4[2] = dat_multi2[2] = backlight;
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi1);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi2);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi3);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi4);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi5);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi6);
+	}
+
+	if (gam != sd->vold.gamma) {
+		sd->vold.gamma = gam;
+		if (gam < 0 || gam > sd->vmax.gamma)
+			gam = 0;
+
+		dat_multi1[2] = 0x6d;
+		dat_multi3[2] = dat_multi1[2] + 1;
+		dat_multi4[2] = dat_multi2[2] = 0x40 + gam;
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi1);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi2);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi3);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi4);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi5);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi6);
+	}
+
+	if (cntr != sd->vold.contrast) {
+		sd->vold.contrast = cntr;
+		if (cntr < 0 || cntr > sd->vmax.contrast)
+			cntr = 0;
+
+		dat_multi1[2] = 0x6d;
+		dat_multi3[2] = dat_multi1[2] + 1;
+		dat_multi4[2] = dat_multi2[2] = 0x12 + 16 * cntr;
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi1);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi2);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi3);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi4);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi5);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi6);
+	}
+
+	if (bright != sd->vold.brightness) {
+		sd->vold.brightness = bright;
+		if (bright < 0 || bright > sd->vmax.brightness)
+			bright = 0;
+
+		dat_bright2[2] = bright;
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_bright1);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_bright2);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_bright3);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_bright4);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_bright5);
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_bright6);
+	}
+
+	if (sharp != sd->vold.sharpness) {
+		sd->vold.sharpness = sharp;
+		if (sharp < 0 || sharp > sd->vmax.sharpness)
+			sharp = 0;
+
+		dat_sharp[1] = sharp;
+		ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0032, 3, dat_sharp);
+	}
+
+	if (hue != sd->vold.hue) {
+		sd->swapRB = hue;
+		sd->vold.hue = hue;
+	}
+
+	return 0;
+}
+
+static void mi2020_post_unset_alt(struct gspca_dev *gspca_dev)
+{
+	ctrl_out(gspca_dev, 0x40, 5, 0x0000, 0x0000, 0, NULL);
+	msleep(20);
+	if (_MI2020c_ || _MI2020_)
+		ctrl_out(gspca_dev, 0x40, 1, 0x0001, 0x0000, 0, NULL);
+	else
+		ctrl_out(gspca_dev, 0x40, 1, 0x0041, 0x0000, 0, NULL);
+}
diff --git a/drivers/media/video/gspca/gl860/gl860-ov2640.c b/drivers/media/video/gspca/gl860/gl860-ov2640.c
new file mode 100644
index 00000000000..14b9c373f9f
--- /dev/null
+++ b/drivers/media/video/gspca/gl860/gl860-ov2640.c
@@ -0,0 +1,505 @@
+/* @file gl860-ov2640.c
+ * @author Olivier LORIN, from Malmostoso's logs
+ * @date 2009-08-27
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* Sensor : OV2640 */
+
+#include "gl860.h"
+
+static u8 dat_init1[] = "\x00\x41\x07\x6a\x06\x61\x0d\x6a" "\x10\x10\xc1\x01";
+static u8 dat_init2[] = {0x61}; /* expected */
+static u8 dat_init3[] = {0x51}; /* expected */
+
+static u8 dat_post[] =
+	"\x00\x41\x07\x6a\x06\xef\x0d\x6a" "\x10\x10\xc1\x01";
+
+static u8 dat_640[]  = "\xd0\x01\xd1\x08\xd2\xe0\xd3\x02\xd4\x10\xd5\x81";
+static u8 dat_800[]  = "\xd0\x01\xd1\x10\xd2\x58\xd3\x02\xd4\x18\xd5\x21";
+static u8 dat_1280[] = "\xd0\x01\xd1\x18\xd2\xc0\xd3\x02\xd4\x28\xd5\x01";
+static u8 dat_1600[] = "\xd0\x01\xd1\x20\xd2\xb0\xd3\x02\xd4\x30\xd5\x41";
+
+static u8 c50[] = {0x50}; /* expected */
+static u8 c28[] = {0x28}; /* expected */
+static u8 ca8[] = {0xa8}; /* expected */
+
+static struct validx tbl_init_at_startup[] = {
+	{0x0000, 0x0000}, {0x0010, 0x0010}, {0x0008, 0x00c0}, {0x0001, 0x00c1},
+	{0x0001, 0x00c2}, {0x0020, 0x0006}, {0x006a, 0x000d},
+	{0x0050, 0x0000}, {0x0041, 0x0000}, {0x006a, 0x0007}, {0x0061, 0x0006},
+	{0x006a, 0x000d}, {0x0000, 0x00c0}, {0x0010, 0x0010}, {0x0001, 0x00c1},
+	{0x0041, 0x00c2}, {0x0004, 0x00d8}, {0x0012, 0x0004}, {0x0000, 0x0058},
+	{0x0041, 0x0000}, {0x0061, 0x0000},
+};
+
+static struct validx tbl_common[] = {
+	{0x6000, 0x00ff}, {0x60ff, 0x002c}, {0x60df, 0x002e}, {0x6001, 0x00ff},
+	{0x6080, 0x0012}, {0x6000, 0x0000}, {0x6000, 0x0045}, {0x6000, 0x0010},
+	{0x6035, 0x003c}, {0x6000, 0x0011}, {0x6028, 0x0004}, {0x60e5, 0x0013},
+	{0x6088, 0x0014}, {0x600c, 0x002c}, {0x6078, 0x0033}, {0x60f7, 0x003b},
+	{0x6000, 0x003e}, {0x6011, 0x0043}, {0x6010, 0x0016}, {0x6082, 0x0039},
+	{0x6088, 0x0035}, {0x600a, 0x0022}, {0x6040, 0x0037}, {0x6000, 0x0023},
+	{0x60a0, 0x0034}, {0x601a, 0x0036}, {0x6002, 0x0006}, {0x60c0, 0x0007},
+	{0x60b7, 0x000d}, {0x6001, 0x000e}, {0x6000, 0x004c}, {0x6081, 0x004a},
+	{0x6099, 0x0021}, {0x6002, 0x0009}, {0x603e, 0x0024}, {0x6034, 0x0025},
+	{0x6081, 0x0026}, {0x6000, 0x0000}, {0x6000, 0x0045}, {0x6000, 0x0010},
+	{0x6000, 0x005c}, {0x6000, 0x0063}, {0x6000, 0x007c}, {0x6070, 0x0061},
+	{0x6080, 0x0062}, {0x6080, 0x0020}, {0x6030, 0x0028}, {0x6000, 0x006c},
+	{0x6000, 0x006e}, {0x6002, 0x0070}, {0x6094, 0x0071}, {0x60c1, 0x0073},
+	{0x6034, 0x003d}, {0x6057, 0x005a}, {0x60bb, 0x004f}, {0x609c, 0x0050},
+	{0x6080, 0x006d}, {0x6002, 0x0039}, {0x6033, 0x003a}, {0x60f1, 0x003b},
+	{0x6031, 0x003c}, {0x6000, 0x00ff}, {0x6014, 0x00e0}, {0x60ff, 0x0076},
+	{0x60a0, 0x0033}, {0x6020, 0x0042}, {0x6018, 0x0043}, {0x6000, 0x004c},
+	{0x60d0, 0x0087}, {0x600f, 0x0088}, {0x6003, 0x00d7}, {0x6010, 0x00d9},
+	{0x6005, 0x00da}, {0x6082, 0x00d3}, {0x60c0, 0x00f9}, {0x6006, 0x0044},
+	{0x6007, 0x00d1}, {0x6002, 0x00d2}, {0x6000, 0x00d2}, {0x6011, 0x00d8},
+	{0x6008, 0x00c8}, {0x6080, 0x00c9}, {0x6008, 0x007c}, {0x6020, 0x007d},
+	{0x6020, 0x007d}, {0x6000, 0x0090}, {0x600e, 0x0091}, {0x601a, 0x0091},
+	{0x6031, 0x0091}, {0x605a, 0x0091}, {0x6069, 0x0091}, {0x6075, 0x0091},
+	{0x607e, 0x0091}, {0x6088, 0x0091}, {0x608f, 0x0091}, {0x6096, 0x0091},
+	{0x60a3, 0x0091}, {0x60af, 0x0091}, {0x60c4, 0x0091}, {0x60d7, 0x0091},
+	{0x60e8, 0x0091}, {0x6020, 0x0091}, {0x6000, 0x0092}, {0x6006, 0x0093},
+	{0x60e3, 0x0093}, {0x6005, 0x0093}, {0x6005, 0x0093}, {0x6000, 0x0093},
+	{0x6004, 0x0093}, {0x6000, 0x0093}, {0x6000, 0x0093}, {0x6000, 0x0093},
+	{0x6000, 0x0093}, {0x6000, 0x0093}, {0x6000, 0x0093}, {0x6000, 0x0093},
+	{0x6000, 0x0096}, {0x6008, 0x0097}, {0x6019, 0x0097}, {0x6002, 0x0097},
+	{0x600c, 0x0097}, {0x6024, 0x0097}, {0x6030, 0x0097}, {0x6028, 0x0097},
+	{0x6026, 0x0097}, {0x6002, 0x0097}, {0x6098, 0x0097}, {0x6080, 0x0097},
+	{0x6000, 0x0097}, {0x6000, 0x0097}, {0x60ed, 0x00c3}, {0x609a, 0x00c4},
+	{0x6000, 0x00a4}, {0x6011, 0x00c5}, {0x6051, 0x00c6}, {0x6010, 0x00c7},
+	{0x6066, 0x00b6}, {0x60a5, 0x00b8}, {0x6064, 0x00b7}, {0x607c, 0x00b9},
+	{0x60af, 0x00b3}, {0x6097, 0x00b4}, {0x60ff, 0x00b5}, {0x60c5, 0x00b0},
+	{0x6094, 0x00b1}, {0x600f, 0x00b2}, {0x605c, 0x00c4}, {0x6000, 0x00a8},
+	{0x60c8, 0x00c0}, {0x6096, 0x00c1}, {0x601d, 0x0086}, {0x6000, 0x0050},
+	{0x6090, 0x0051}, {0x6018, 0x0052}, {0x6000, 0x0053}, {0x6000, 0x0054},
+	{0x6088, 0x0055}, {0x6000, 0x0057}, {0x6090, 0x005a}, {0x6018, 0x005b},
+	{0x6005, 0x005c}, {0x60ed, 0x00c3}, {0x6000, 0x007f}, {0x6005, 0x00da},
+	{0x601f, 0x00e5}, {0x6067, 0x00e1}, {0x6000, 0x00e0}, {0x60ff, 0x00dd},
+	{0x6000, 0x0005}, {0x6001, 0x00ff}, {0x6000, 0x0000}, {0x6000, 0x0045},
+	{0x6000, 0x0010},
+};
+
+static struct validx tbl_sensor_settings_common_a[] = {
+	{0x0041, 0x0000}, {0x006a, 0x0007}, {0x00ef, 0x0006}, {0x006a, 0x000d},
+	{0x0000, 0x00c0}, {0x0010, 0x0010}, {0x0001, 0x00c1}, {0x0041, 0x00c2},
+	{0x0004, 0x00d8}, {0x0012, 0x0004}, {0x0000, 0x0058}, {0x0041, 0x0000},
+	{50, 0xffff},
+	{0x0061, 0x0000},
+	{0xffff, 0xffff},
+	{0x6000, 0x00ff}, {0x6000, 0x007c}, {0x6007, 0x007d},
+	{30, 0xffff},
+	{0x0040, 0x0000},
+};
+
+static struct validx tbl_sensor_settings_common_b[] = {
+	{0x6001, 0x00ff}, {0x6038, 0x000c},
+	{10, 0xffff},
+	{0x6000, 0x0011},
+	/* backlight=31/64 */
+	{0x6001, 0x00ff}, {0x603e, 0x0024}, {0x6034, 0x0025},
+	/* bright=0/256 */
+	{0x6000, 0x00ff}, {0x6009, 0x007c}, {0x6000, 0x007d},
+	/* wbal=64/128 */
+	{0x6000, 0x00ff}, {0x6003, 0x007c}, {0x6040, 0x007d},
+	/* cntr=0/256 */
+	{0x6000, 0x00ff}, {0x6007, 0x007c}, {0x6000, 0x007d},
+	/* sat=128/256 */
+	{0x6000, 0x00ff}, {0x6001, 0x007c}, {0x6080, 0x007d},
+	/* sharpness=0/32 */
+	{0x6000, 0x00ff}, {0x6001, 0x0092}, {0x60c0, 0x0093},
+	/* hue=0/256 */
+	{0x6000, 0x00ff}, {0x6002, 0x007c}, {0x6000, 0x007d},
+	/* gam=32/64 */
+	{0x6000, 0x00ff}, {0x6008, 0x007c}, {0x6020, 0x007d},
+	/* image right up */
+	{0xffff, 0xffff},
+	{15, 0xffff},
+	{0x6001, 0x00ff}, {0x6000, 0x8004},
+	{0xffff, 0xffff},
+	{0x60a8, 0x0004},
+	{15, 0xffff},
+	{0x6001, 0x00ff}, {0x6000, 0x8004},
+	{0xffff, 0xffff},
+	{0x60f8, 0x0004},
+	/* image right up */
+	{0xffff, 0xffff},
+	/* backlight=31/64 */
+	{0x6001, 0x00ff}, {0x603e, 0x0024}, {0x6034, 0x0025},
+};
+
+static struct validx tbl_640[] = {
+	{0x6000, 0x00ff}, {0x60f1, 0x00dd}, {0x6004, 0x00e0}, {0x6067, 0x00e1},
+	{0x6004, 0x00da}, {0x6000, 0x00ff}, {0x60f1, 0x00dd}, {0x6004, 0x00e0},
+	{0x6001, 0x00ff}, {0x6000, 0x0012}, {0x6000, 0x0011}, {0x6011, 0x0017},
+	{0x6075, 0x0018}, {0x6001, 0x0019}, {0x6097, 0x001a}, {0x6036, 0x0032},
+	{0x60bb, 0x004f}, {0x6057, 0x005a}, {0x609c, 0x0050}, {0x6080, 0x006d},
+	{0x6092, 0x0026}, {0x60ff, 0x0020}, {0x6000, 0x0027}, {0x6000, 0x00ff},
+	{0x60c8, 0x00c0}, {0x6096, 0x00c1}, {0x6000, 0x008c}, {0x603d, 0x0086},
+	{0x6089, 0x0050}, {0x6090, 0x0051}, {0x602c, 0x0052}, {0x6000, 0x0053},
+	{0x6000, 0x0054}, {0x6088, 0x0055}, {0x6000, 0x0057}, {0x60a0, 0x005a},
+	{0x6078, 0x005b}, {0x6000, 0x005c}, {0x6004, 0x00d3}, {0x6000, 0x00e0},
+	{0x60ff, 0x00dd}, {0x60a1, 0x005a},
+};
+
+static struct validx tbl_800[] = {
+	{0x6000, 0x00ff}, {0x60f1, 0x00dd}, {0x6004, 0x00e0}, {0x6067, 0x00e1},
+	{0x6004, 0x00da}, {0x6000, 0x00ff}, {0x60f1, 0x00dd}, {0x6004, 0x00e0},
+	{0x6001, 0x00ff}, {0x6040, 0x0012}, {0x6000, 0x0011}, {0x6011, 0x0017},
+	{0x6043, 0x0018}, {0x6000, 0x0019}, {0x604b, 0x001a}, {0x6009, 0x0032},
+	{0x60ca, 0x004f}, {0x60a8, 0x0050}, {0x6000, 0x006d}, {0x6038, 0x003d},
+	{0x60c8, 0x0035}, {0x6000, 0x0022}, {0x6092, 0x0026}, {0x60ff, 0x0020},
+	{0x6000, 0x0027}, {0x6000, 0x00ff}, {0x6064, 0x00c0}, {0x604b, 0x00c1},
+	{0x6000, 0x008c}, {0x601d, 0x0086}, {0x6082, 0x00d3}, {0x6000, 0x00e0},
+	{0x60ff, 0x00dd}, {0x6020, 0x008c}, {0x6001, 0x00ff}, {0x6044, 0x0018},
+};
+
+static struct validx tbl_big_a[] = {
+	{0x0002, 0x00c1}, {0x6000, 0x00ff}, {0x60f1, 0x00dd}, {0x6004, 0x00e0},
+	{0x6001, 0x00ff}, {0x6000, 0x0012}, {0x6000, 0x0000}, {0x6000, 0x0045},
+	{0x6000, 0x0010}, {0x6000, 0x0011}, {0x6011, 0x0017}, {0x6075, 0x0018},
+	{0x6001, 0x0019}, {0x6097, 0x001a}, {0x6036, 0x0032}, {0x60bb, 0x004f},
+	{0x609c, 0x0050}, {0x6057, 0x005a}, {0x6080, 0x006d}, {0x6043, 0x000f},
+	{0x608f, 0x0003}, {0x6005, 0x007c}, {0x6081, 0x0026}, {0x6000, 0x00ff},
+	{0x60c8, 0x00c0}, {0x6096, 0x00c1}, {0x6000, 0x008c},
+};
+
+static struct validx tbl_big_b[] = {
+	{0x603d, 0x0086}, {0x6000, 0x0050}, {0x6090, 0x0051}, {0x602c, 0x0052},
+	{0x6000, 0x0053}, {0x6000, 0x0054}, {0x6088, 0x0055}, {0x6000, 0x0057},
+	{0x6040, 0x005a}, {0x60f0, 0x005b}, {0x6001, 0x005c}, {0x6082, 0x00d3},
+	{0x6000, 0x008e},
+};
+
+static struct validx tbl_big_c[] = {
+	{0x6004, 0x00da}, {0x6000, 0x00e0}, {0x6067, 0x00e1}, {0x60ff, 0x00dd},
+	{0x6001, 0x00ff}, {0x6000, 0x00ff}, {0x60f1, 0x00dd}, {0x6004, 0x00e0},
+	{0x6001, 0x00ff}, {0x6000, 0x0011}, {0x6000, 0x00ff}, {0x6010, 0x00c7},
+	{0x6000, 0x0092}, {0x6006, 0x0093}, {0x60e3, 0x0093}, {0x6005, 0x0093},
+	{0x6005, 0x0093}, {0x60ed, 0x00c3}, {0x6000, 0x00a4}, {0x60d0, 0x0087},
+	{0x6003, 0x0096}, {0x600c, 0x0097}, {0x6024, 0x0097}, {0x6030, 0x0097},
+	{0x6028, 0x0097}, {0x6026, 0x0097}, {0x6002, 0x0097}, {0x6001, 0x00ff},
+	{0x6043, 0x000f}, {0x608f, 0x0003}, {0x6000, 0x002d}, {0x6000, 0x002e},
+	{0x600a, 0x0022}, {0x6002, 0x0070}, {0x6008, 0x0014}, {0x6048, 0x0014},
+	{0x6000, 0x00ff}, {0x6000, 0x00e0}, {0x60ff, 0x00dd},
+};
+
+static struct validx tbl_post_unset_alt[] = {
+	{0x006a, 0x000d}, {0x6001, 0x00ff}, {0x6081, 0x0026}, {0x6000, 0x0000},
+	{0x6000, 0x0045}, {0x6000, 0x0010}, {0x6068, 0x000d},
+	{50, 0xffff},
+	{0x0021, 0x0000},
+};
+
+static int  ov2640_init_at_startup(struct gspca_dev *gspca_dev);
+static int  ov2640_configure_alt(struct gspca_dev *gspca_dev);
+static int  ov2640_init_pre_alt(struct gspca_dev *gspca_dev);
+static int  ov2640_init_post_alt(struct gspca_dev *gspca_dev);
+static void ov2640_post_unset_alt(struct gspca_dev *gspca_dev);
+static int  ov2640_camera_settings(struct gspca_dev *gspca_dev);
+/*==========================================================================*/
+
+void ov2640_init_settings(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->vcur.backlight  =  32;
+	sd->vcur.brightness =   0;
+	sd->vcur.sharpness  =   6;
+	sd->vcur.contrast   =   0;
+	sd->vcur.gamma      =  32;
+	sd->vcur.hue        =   0;
+	sd->vcur.saturation = 128;
+	sd->vcur.whitebal   =  64;
+
+	sd->vmax.backlight  =  64;
+	sd->vmax.brightness = 255;
+	sd->vmax.sharpness  =  31;
+	sd->vmax.contrast   = 255;
+	sd->vmax.gamma      =  64;
+	sd->vmax.hue        = 255 + 1;
+	sd->vmax.saturation = 255;
+	sd->vmax.whitebal   = 128;
+	sd->vmax.mirror     = 0;
+	sd->vmax.flip       = 0;
+	sd->vmax.AC50Hz     = 0;
+
+	sd->dev_camera_settings = ov2640_camera_settings;
+	sd->dev_init_at_startup = ov2640_init_at_startup;
+	sd->dev_configure_alt   = ov2640_configure_alt;
+	sd->dev_init_pre_alt    = ov2640_init_pre_alt;
+	sd->dev_post_unset_alt  = ov2640_post_unset_alt;
+}
+
+/*==========================================================================*/
+
+static void common(struct gspca_dev *gspca_dev)
+{
+	fetch_validx(gspca_dev, tbl_common, ARRAY_SIZE(tbl_common));
+}
+
+static int ov2640_init_at_startup(struct gspca_dev *gspca_dev)
+{
+	fetch_validx(gspca_dev, tbl_init_at_startup,
+			ARRAY_SIZE(tbl_init_at_startup));
+
+	ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, 12, dat_init1);
+
+	common(gspca_dev);
+
+	ctrl_in(gspca_dev, 0xc0, 2, 0x0000, 0x0006, 1, dat_init2);
+
+	ctrl_out(gspca_dev, 0x40, 1, 0x00ef, 0x0006, 0, NULL);
+
+	ctrl_in(gspca_dev, 0xc0, 2, 0x0000, 0x0000, 1, dat_init3);
+
+	ctrl_out(gspca_dev, 0x40, 1, 0x0051, 0x0000, 0, NULL);
+/*	ctrl_out(gspca_dev, 0x40, 11, 0x0000, 0x0000, 0, NULL); */
+
+	return 0;
+}
+
+static int ov2640_init_pre_alt(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->vold.backlight  = -1;
+	sd->vold.brightness = -1;
+	sd->vold.sharpness  = -1;
+	sd->vold.contrast   = -1;
+	sd->vold.saturation = -1;
+	sd->vold.gamma    = -1;
+	sd->vold.hue      = -1;
+	sd->vold.whitebal = -1;
+
+	ov2640_init_post_alt(gspca_dev);
+
+	return 0;
+}
+
+static int ov2640_init_post_alt(struct gspca_dev *gspca_dev)
+{
+	s32 reso = gspca_dev->cam.cam_mode[(s32) gspca_dev->curr_mode].priv;
+	s32 n; /* reserved for FETCH macros */
+
+	ctrl_out(gspca_dev, 0x40, 5, 0x0001, 0x0000, 0, NULL);
+
+	n = fetch_validx(gspca_dev, tbl_sensor_settings_common_a,
+			ARRAY_SIZE(tbl_sensor_settings_common_a));
+	ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, 12, dat_post);
+	common(gspca_dev);
+	keep_on_fetching_validx(gspca_dev, tbl_sensor_settings_common_a,
+				ARRAY_SIZE(tbl_sensor_settings_common_a), n);
+
+	switch (reso) {
+	case IMAGE_640:
+		n = fetch_validx(gspca_dev, tbl_640, ARRAY_SIZE(tbl_640));
+		ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, 12, dat_640);
+		break;
+
+	case IMAGE_800:
+		n = fetch_validx(gspca_dev, tbl_800, ARRAY_SIZE(tbl_800));
+		ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, 12, dat_800);
+		break;
+
+	case IMAGE_1600:
+	case IMAGE_1280:
+		n = fetch_validx(gspca_dev, tbl_big_a, ARRAY_SIZE(tbl_big_a));
+
+		if (reso == IMAGE_1280) {
+			n = fetch_validx(gspca_dev, tbl_big_b,
+					ARRAY_SIZE(tbl_big_b));
+		} else {
+			ctrl_out(gspca_dev, 0x40, 1, 0x601d, 0x0086, 0, NULL);
+			ctrl_out(gspca_dev, 0x40, 1, 0x6001, 0x00d7, 0, NULL);
+			ctrl_out(gspca_dev, 0x40, 1, 0x6082, 0x00d3, 0, NULL);
+		}
+
+		n = fetch_validx(gspca_dev, tbl_big_c, ARRAY_SIZE(tbl_big_c));
+
+		if (reso == IMAGE_1280) {
+			ctrl_out(gspca_dev, 0x40, 1, 0x6001, 0x00ff, 0, NULL);
+			ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200,
+					12, dat_1280);
+		} else {
+			ctrl_out(gspca_dev, 0x40, 1, 0x6020, 0x008c, 0, NULL);
+			ctrl_out(gspca_dev, 0x40, 1, 0x6001, 0x00ff, 0, NULL);
+			ctrl_out(gspca_dev, 0x40, 1, 0x6076, 0x0018, 0, NULL);
+			ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200,
+					12, dat_1600);
+		}
+		break;
+	}
+
+	n = fetch_validx(gspca_dev, tbl_sensor_settings_common_b,
+			ARRAY_SIZE(tbl_sensor_settings_common_b));
+	ctrl_in(gspca_dev, 0xc0, 2, 0x0000, 0x0000, 1, c50);
+	keep_on_fetching_validx(gspca_dev, tbl_sensor_settings_common_b,
+				ARRAY_SIZE(tbl_sensor_settings_common_b), n);
+	ctrl_in(gspca_dev, 0xc0, 2, 0x6000, 0x8004, 1, c28);
+	keep_on_fetching_validx(gspca_dev, tbl_sensor_settings_common_b,
+				ARRAY_SIZE(tbl_sensor_settings_common_b), n);
+	ctrl_in(gspca_dev, 0xc0, 2, 0x6000, 0x8004, 1, ca8);
+	keep_on_fetching_validx(gspca_dev, tbl_sensor_settings_common_b,
+				ARRAY_SIZE(tbl_sensor_settings_common_b), n);
+	ctrl_in(gspca_dev, 0xc0, 2, 0x0000, 0x0000, 1, c50);
+	keep_on_fetching_validx(gspca_dev, tbl_sensor_settings_common_b,
+				ARRAY_SIZE(tbl_sensor_settings_common_b), n);
+
+	ov2640_camera_settings(gspca_dev);
+
+	return 0;
+}
+
+static int ov2640_configure_alt(struct gspca_dev *gspca_dev)
+{
+	s32 reso = gspca_dev->cam.cam_mode[(s32) gspca_dev->curr_mode].priv;
+
+	switch (reso) {
+	case IMAGE_640:
+		gspca_dev->alt = 3 + 1;
+		break;
+
+	case IMAGE_800:
+	case IMAGE_1280:
+	case IMAGE_1600:
+		gspca_dev->alt = 1 + 1;
+		break;
+	}
+	return 0;
+}
+
+static int ov2640_camera_settings(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	s32 backlight = sd->vcur.backlight;
+	s32 bright = sd->vcur.brightness;
+	s32 sharp  = sd->vcur.sharpness;
+	s32 gam    = sd->vcur.gamma;
+	s32 cntr   = sd->vcur.contrast;
+	s32 sat    = sd->vcur.saturation;
+	s32 hue    = sd->vcur.hue;
+	s32 wbal   = sd->vcur.whitebal;
+
+	if (backlight != sd->vold.backlight) {
+		if (backlight < 0 || backlight > sd->vmax.backlight)
+			backlight = 0;
+
+		ctrl_out(gspca_dev, 0x40, 1, 0x6001                 , 0x00ff,
+				0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0x601f + backlight     , 0x0024,
+				0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0x601f + backlight - 10, 0x0025,
+				0, NULL);
+		/* No sd->vold.backlight=backlight; (to be done again later) */
+	}
+
+	if (bright != sd->vold.brightness) {
+		sd->vold.brightness = bright;
+		if (bright < 0 || bright > sd->vmax.brightness)
+			bright = 0;
+
+		ctrl_out(gspca_dev, 0x40, 1, 0x6000         , 0x00ff, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0x6009         , 0x007c, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0x6000 + bright, 0x007d, 0, NULL);
+	}
+
+	if (wbal != sd->vold.whitebal) {
+		sd->vold.whitebal = wbal;
+		if (wbal < 0 || wbal > sd->vmax.whitebal)
+			wbal = 0;
+
+		ctrl_out(gspca_dev, 0x40, 1, 0x6000       , 0x00ff, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0x6003       , 0x007c, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0x6000 + wbal, 0x007d, 0, NULL);
+	}
+
+	if (cntr != sd->vold.contrast) {
+		sd->vold.contrast = cntr;
+		if (cntr < 0 || cntr > sd->vmax.contrast)
+			cntr = 0;
+
+		ctrl_out(gspca_dev, 0x40, 1, 0x6000       , 0x00ff, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0x6007       , 0x007c, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0x6000 + cntr, 0x007d, 0, NULL);
+	}
+
+	if (sat != sd->vold.saturation) {
+		sd->vold.saturation = sat;
+		if (sat < 0 || sat > sd->vmax.saturation)
+			sat = 0;
+
+		ctrl_out(gspca_dev, 0x40, 1, 0x6000      , 0x00ff, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0x6001      , 0x007c, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0x6000 + sat, 0x007d, 0, NULL);
+	}
+
+	if (sharp != sd->vold.sharpness) {
+		sd->vold.sharpness = sharp;
+		if (sharp < 0 || sharp > sd->vmax.sharpness)
+			sharp = 0;
+
+		ctrl_out(gspca_dev, 0x40, 1, 0x6000        , 0x00ff, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0x6001        , 0x0092, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0x60c0 + sharp, 0x0093, 0, NULL);
+	}
+
+	if (hue != sd->vold.hue) {
+		sd->vold.hue = hue;
+		if (hue < 0 || hue > sd->vmax.hue)
+			hue = 0;
+
+		ctrl_out(gspca_dev, 0x40, 1, 0x6000     , 0x00ff, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0x6002     , 0x007c, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0x6000 + hue * (hue < 255), 0x007d,
+				0, NULL);
+		if (hue >= sd->vmax.hue)
+			sd->swapRB = 1;
+		else
+			sd->swapRB = 0;
+	}
+
+	if (gam != sd->vold.gamma) {
+		sd->vold.gamma = gam;
+		if (gam < 0 || gam > sd->vmax.gamma)
+			gam = 0;
+
+		ctrl_out(gspca_dev, 0x40, 1, 0x6000      , 0x00ff, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0x6008      , 0x007c, 0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0x6000 + gam, 0x007d, 0, NULL);
+	}
+
+	if (backlight != sd->vold.backlight) {
+		sd->vold.backlight = backlight;
+
+		ctrl_out(gspca_dev, 0x40, 1, 0x6001                 , 0x00ff,
+				0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0x601f + backlight     , 0x0024,
+				0, NULL);
+		ctrl_out(gspca_dev, 0x40, 1, 0x601f + backlight - 10, 0x0025,
+				0, NULL);
+	}
+
+	return 0;
+}
+
+static void ov2640_post_unset_alt(struct gspca_dev *gspca_dev)
+{
+	ctrl_out(gspca_dev, 0x40, 5, 0x0000, 0x0000, 0, NULL);
+	msleep(20);
+	fetch_validx(gspca_dev, tbl_post_unset_alt,
+			ARRAY_SIZE(tbl_post_unset_alt));
+}
diff --git a/drivers/media/video/gspca/gl860/gl860-ov9655.c b/drivers/media/video/gspca/gl860/gl860-ov9655.c
new file mode 100644
index 00000000000..eda3346f939
--- /dev/null
+++ b/drivers/media/video/gspca/gl860/gl860-ov9655.c
@@ -0,0 +1,337 @@
+/* @file gl860-ov9655.c
+ * @author Olivier LORIN, from logs done by Simon (Sur3) and Almighurt
+ * on dsd's weblog
+ * @date 2009-08-27
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* Sensor : OV9655 */
+
+#include "gl860.h"
+
+static struct validx tbl_init_at_startup[] = {
+	{0x0000, 0x0000}, {0x0010, 0x0010}, {0x0008, 0x00c0}, {0x0001, 0x00c1},
+	{0x0001, 0x00c2}, {0x0020, 0x0006}, {0x006a, 0x000d},
+
+	{0x0040, 0x0000},
+};
+
+static struct validx tbl_commmon[] = {
+	{0x0041, 0x0000}, {0x006a, 0x0007}, {0x0063, 0x0006}, {0x006a, 0x000d},
+	{0x0000, 0x00c0}, {0x0010, 0x0010}, {0x0001, 0x00c1}, {0x0041, 0x00c2},
+	{0x0004, 0x00d8}, {0x0012, 0x0004}, {0x0000, 0x0058}, {0x0040, 0x0000},
+	{0x00f3, 0x0006}, {0x0058, 0x0000}, {0x0048, 0x0000}, {0x0061, 0x0000},
+};
+
+static s32 tbl_length[] = {12, 56, 52, 54, 56, 42, 32, 12};
+
+static u8 *tbl_640[] = {
+	"\x00\x40\x07\x6a\x06\xf3\x0d\x6a" "\x10\x10\xc1\x01"
+	,
+	"\x12\x80\x00\x00\x01\x98\x02\x80" "\x03\x12\x04\x03\x0b\x57\x0e\x61"
+	"\x0f\x42\x11\x01\x12\x60\x13\x00" "\x14\x3a\x16\x24\x17\x14\x18\x00"
+	"\x19\x01\x1a\x3d\x1e\x04\x24\x3c" "\x25\x36\x26\x72\x27\x08\x28\x08"
+	"\x29\x15\x2a\x00\x2b\x00\x2c\x08"
+	,
+	"\x32\xff\x33\x00\x34\x3d\x35\x00" "\x36\xfa\x38\x72\x39\x57\x3a\x00"
+	"\x3b\x0c\x3d\x99\x3e\x0c\x3f\xc1" "\x40\xc0\x41\x00\x42\xc0\x43\x0a"
+	"\x44\xf0\x45\x46\x46\x62\x47\x2a" "\x48\x3c\x4a\xee\x4b\xe7\x4c\xe7"
+	"\x4d\xe7\x4e\xe7"
+	,
+	"\x4f\x98\x50\x98\x51\x00\x52\x28" "\x53\x70\x54\x98\x58\x1a\x59\x85"
+	"\x5a\xa9\x5b\x64\x5c\x84\x5d\x53" "\x5e\x0e\x5f\xf0\x60\xf0\x61\xf0"
+	"\x62\x00\x63\x00\x64\x02\x65\x20" "\x66\x00\x69\x0a\x6b\x5a\x6c\x04"
+	"\x6d\x55\x6e\x00\x6f\x9d"
+	,
+	"\x70\x15\x71\x78\x72\x00\x73\x00" "\x74\x3a\x75\x35\x76\x01\x77\x02"
+	"\x7a\x24\x7b\x04\x7c\x07\x7d\x10" "\x7e\x28\x7f\x36\x80\x44\x81\x52"
+	"\x82\x60\x83\x6c\x84\x78\x85\x8c" "\x86\x9e\x87\xbb\x88\xd2\x89\xe5"
+	"\x8a\x23\x8c\x8d\x90\x7c\x91\x7b"
+	,
+	"\x9d\x02\x9e\x02\x9f\x74\xa0\x73" "\xa1\x40\xa4\x50\xa5\x68\xa6\x70"
+	"\xa8\xc1\xa9\xef\xaa\x92\xab\x04" "\xac\x80\xad\x80\xae\x80\xaf\x80"
+	"\xb2\xf2\xb3\x20\xb4\x20\xb5\x00" "\xb6\xaf"
+	,
+	"\xbb\xae\xbc\x4f\xbd\x4e\xbe\x6a" "\xbf\x68\xc0\xaa\xc1\xc0\xc2\x01"
+	"\xc3\x4e\xc6\x85\xc7\x81\xc9\xe0" "\xca\xe8\xcb\xf0\xcc\xd8\xcd\x93"
+	,
+	"\xd0\x01\xd1\x08\xd2\xe0\xd3\x01" "\xd4\x10\xd5\x80"
+};
+
+static u8 *tbl_800[] = {
+	"\x00\x40\x07\x6a\x06\xf3\x0d\x6a" "\x10\x10\xc1\x01"
+	,
+	"\x12\x80\x00\x00\x01\x98\x02\x80" "\x03\x12\x04\x01\x0b\x57\x0e\x61"
+	"\x0f\x42\x11\x00\x12\x00\x13\x00" "\x14\x3a\x16\x24\x17\x1b\x18\xbb"
+	"\x19\x01\x1a\x81\x1e\x04\x24\x3c" "\x25\x36\x26\x72\x27\x08\x28\x08"
+	"\x29\x15\x2a\x00\x2b\x00\x2c\x08"
+	,
+	"\x32\xa4\x33\x00\x34\x3d\x35\x00" "\x36\xf8\x38\x72\x39\x57\x3a\x00"
+	"\x3b\x0c\x3d\x99\x3e\x0c\x3f\xc2" "\x40\xc0\x41\x00\x42\xc0\x43\x0a"
+	"\x44\xf0\x45\x46\x46\x62\x47\x2a" "\x48\x3c\x4a\xec\x4b\xe8\x4c\xe8"
+	"\x4d\xe8\x4e\xe8"
+	,
+	"\x4f\x98\x50\x98\x51\x00\x52\x28" "\x53\x70\x54\x98\x58\x1a\x59\x85"
+	"\x5a\xa9\x5b\x64\x5c\x84\x5d\x53" "\x5e\x0e\x5f\xf0\x60\xf0\x61\xf0"
+	"\x62\x00\x63\x00\x64\x02\x65\x20" "\x66\x00\x69\x02\x6b\x5a\x6c\x04"
+	"\x6d\x55\x6e\x00\x6f\x9d"
+	,
+	"\x70\x08\x71\x78\x72\x00\x73\x01" "\x74\x3a\x75\x35\x76\x01\x77\x02"
+	"\x7a\x24\x7b\x04\x7c\x07\x7d\x10" "\x7e\x28\x7f\x36\x80\x44\x81\x52"
+	"\x82\x60\x83\x6c\x84\x78\x85\x8c" "\x86\x9e\x87\xbb\x88\xd2\x89\xe5"
+	"\x8a\x23\x8c\x0d\x90\x90\x91\x90"
+	,
+	"\x9d\x02\x9e\x02\x9f\x94\xa0\x94" "\xa1\x01\xa4\x50\xa5\x68\xa6\x70"
+	"\xa8\xc1\xa9\xef\xaa\x92\xab\x04" "\xac\x80\xad\x80\xae\x80\xaf\x80"
+	"\xb2\xf2\xb3\x20\xb4\x20\xb5\x00" "\xb6\xaf"
+	,
+	"\xbb\xae\xbc\x38\xbd\x39\xbe\x01" "\xbf\x01\xc0\xe2\xc1\xc0\xc2\x01"
+	"\xc3\x4e\xc6\x85\xc7\x81\xc9\xe0" "\xca\xe8\xcb\xf0\xcc\xd8\xcd\x93"
+	,
+	"\xd0\x21\xd1\x18\xd2\xe0\xd3\x01" "\xd4\x28\xd5\x00"
+};
+
+static u8 c04[] = {0x04};
+static u8 dat_post_1[] = "\x04\x00\x10\x20\xa1\x00\x00\x02";
+static u8 dat_post_2[] = "\x10\x10\xc1\x02";
+static u8 dat_post_3[] = "\x04\x00\x10\x7c\xa1\x00\x00\x04";
+static u8 dat_post_4[] = "\x10\x02\xc1\x06";
+static u8 dat_post_5[] = "\x04\x00\x10\x7b\xa1\x00\x00\x08";
+static u8 dat_post_6[] = "\x10\x10\xc1\x05";
+static u8 dat_post_7[] = "\x04\x00\x10\x7c\xa1\x00\x00\x08";
+static u8 dat_post_8[] = "\x04\x00\x10\x7c\xa1\x00\x00\x09";
+
+static struct validx tbl_init_post_alt[] = {
+	{0x6032, 0x00ff}, {0x6032, 0x00ff}, {0x6032, 0x00ff}, {0x603c, 0x00ff},
+	{0x6003, 0x00ff}, {0x6032, 0x00ff}, {0x6032, 0x00ff}, {0x6001, 0x00ff},
+	{0x6000, 0x801e},
+	{0xffff, 0xffff},
+	{0x6004, 0x001e}, {0x6000, 0x801e},
+	{0xffff, 0xffff},
+	{0x6004, 0x001e}, {0x6012, 0x0003}, {0x6000, 0x801e},
+	{0xffff, 0xffff},
+	{0x6004, 0x001e}, {0x6000, 0x801e},
+	{0xffff, 0xffff},
+	{0x6004, 0x001e}, {0x6012, 0x0003},
+	{0xffff, 0xffff},
+	{0x6000, 0x801e},
+	{0xffff, 0xffff},
+	{0x6004, 0x001e}, {0x6000, 0x801e},
+	{0xffff, 0xffff},
+	{0x6004, 0x001e}, {0x6012, 0x0003}, {0x6000, 0x801e},
+	{0xffff, 0xffff},
+	{0x6004, 0x001e}, {0x6000, 0x801e},
+	{0xffff, 0xffff},
+	{0x6004, 0x001e}, {0x6012, 0x0003},
+	{0xffff, 0xffff},
+	{0x6000, 0x801e},
+	{0xffff, 0xffff},
+	{0x6004, 0x001e}, {0x6000, 0x801e},
+	{0xffff, 0xffff},
+	{0x6004, 0x001e}, {0x6012, 0x0003},
+};
+
+static int  ov9655_init_at_startup(struct gspca_dev *gspca_dev);
+static int  ov9655_configure_alt(struct gspca_dev *gspca_dev);
+static int  ov9655_init_pre_alt(struct gspca_dev *gspca_dev);
+static int  ov9655_init_post_alt(struct gspca_dev *gspca_dev);
+static void ov9655_post_unset_alt(struct gspca_dev *gspca_dev);
+static int  ov9655_camera_settings(struct gspca_dev *gspca_dev);
+/*==========================================================================*/
+
+void ov9655_init_settings(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->vcur.backlight  =   0;
+	sd->vcur.brightness = 128;
+	sd->vcur.sharpness  =   0;
+	sd->vcur.contrast   =   0;
+	sd->vcur.gamma      =   0;
+	sd->vcur.hue        =   0;
+	sd->vcur.saturation =   0;
+	sd->vcur.whitebal   =   0;
+
+	sd->vmax.backlight  =   0;
+	sd->vmax.brightness = 255;
+	sd->vmax.sharpness  =   0;
+	sd->vmax.contrast   =   0;
+	sd->vmax.gamma      =   0;
+	sd->vmax.hue        =   0 + 1;
+	sd->vmax.saturation =   0;
+	sd->vmax.whitebal   =   0;
+	sd->vmax.mirror     = 0;
+	sd->vmax.flip       = 0;
+	sd->vmax.AC50Hz     = 0;
+
+	sd->dev_camera_settings = ov9655_camera_settings;
+	sd->dev_init_at_startup = ov9655_init_at_startup;
+	sd->dev_configure_alt   = ov9655_configure_alt;
+	sd->dev_init_pre_alt    = ov9655_init_pre_alt;
+	sd->dev_post_unset_alt  = ov9655_post_unset_alt;
+}
+
+/*==========================================================================*/
+
+static int ov9655_init_at_startup(struct gspca_dev *gspca_dev)
+{
+	fetch_validx(gspca_dev, tbl_init_at_startup,
+			ARRAY_SIZE(tbl_init_at_startup));
+	fetch_validx(gspca_dev, tbl_commmon, ARRAY_SIZE(tbl_commmon));
+/*	ctrl_out(gspca_dev, 0x40, 11, 0x0000, 0x0000, 0, NULL);*/
+
+	return 0;
+}
+
+static int ov9655_init_pre_alt(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->vold.brightness = -1;
+	sd->vold.hue = -1;
+
+	fetch_validx(gspca_dev, tbl_commmon, ARRAY_SIZE(tbl_commmon));
+
+	ov9655_init_post_alt(gspca_dev);
+
+	return 0;
+}
+
+static int ov9655_init_post_alt(struct gspca_dev *gspca_dev)
+{
+	s32 reso = gspca_dev->cam.cam_mode[(s32) gspca_dev->curr_mode].priv;
+	s32 n; /* reserved for FETCH macros */
+	s32 i;
+	u8 **tbl;
+
+	ctrl_out(gspca_dev, 0x40, 5, 0x0001, 0x0000, 0, NULL);
+
+	tbl = (reso == IMAGE_640) ? tbl_640 : tbl_800;
+
+	ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200,
+			tbl_length[0], tbl[0]);
+	for (i = 1; i < 7; i++)
+		ctrl_out(gspca_dev, 0x40, 3, 0x6000, 0x0200,
+				tbl_length[i], tbl[i]);
+	ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200,
+			tbl_length[7], tbl[7]);
+
+	n = fetch_validx(gspca_dev, tbl_init_post_alt,
+			ARRAY_SIZE(tbl_init_post_alt));
+
+	ctrl_in(gspca_dev, 0xc0, 2, 0x6000, 0x801e, 1, c04);
+	keep_on_fetching_validx(gspca_dev, tbl_init_post_alt,
+					ARRAY_SIZE(tbl_init_post_alt), n);
+	ctrl_in(gspca_dev, 0xc0, 2, 0x6000, 0x801e, 1, c04);
+	keep_on_fetching_validx(gspca_dev, tbl_init_post_alt,
+					ARRAY_SIZE(tbl_init_post_alt), n);
+	ctrl_in(gspca_dev, 0xc0, 2, 0x6000, 0x801e, 1, c04);
+	keep_on_fetching_validx(gspca_dev, tbl_init_post_alt,
+					ARRAY_SIZE(tbl_init_post_alt), n);
+	ctrl_in(gspca_dev, 0xc0, 2, 0x6000, 0x801e, 1, c04);
+	keep_on_fetching_validx(gspca_dev, tbl_init_post_alt,
+					ARRAY_SIZE(tbl_init_post_alt), n);
+	ctrl_out(gspca_dev, 0x40, 3, 0x6000, 0x0200, 8, dat_post_1);
+	keep_on_fetching_validx(gspca_dev, tbl_init_post_alt,
+					ARRAY_SIZE(tbl_init_post_alt), n);
+
+	ctrl_in(gspca_dev, 0xc0, 2, 0x6000, 0x801e, 1, c04);
+	keep_on_fetching_validx(gspca_dev, tbl_init_post_alt,
+					ARRAY_SIZE(tbl_init_post_alt), n);
+	ctrl_in(gspca_dev, 0xc0, 2, 0x6000, 0x801e, 1, c04);
+	keep_on_fetching_validx(gspca_dev, tbl_init_post_alt,
+					ARRAY_SIZE(tbl_init_post_alt), n);
+	ctrl_in(gspca_dev, 0xc0, 2, 0x6000, 0x801e, 1, c04);
+	keep_on_fetching_validx(gspca_dev, tbl_init_post_alt,
+					ARRAY_SIZE(tbl_init_post_alt), n);
+	ctrl_in(gspca_dev, 0xc0, 2, 0x6000, 0x801e, 1, c04);
+	keep_on_fetching_validx(gspca_dev, tbl_init_post_alt,
+					ARRAY_SIZE(tbl_init_post_alt), n);
+	ctrl_out(gspca_dev, 0x40, 3, 0x6000, 0x0200, 8, dat_post_1);
+	keep_on_fetching_validx(gspca_dev, tbl_init_post_alt,
+					ARRAY_SIZE(tbl_init_post_alt), n);
+
+	ctrl_in(gspca_dev, 0xc0, 2, 0x6000, 0x801e, 1, c04);
+	keep_on_fetching_validx(gspca_dev, tbl_init_post_alt,
+					ARRAY_SIZE(tbl_init_post_alt), n);
+	ctrl_in(gspca_dev, 0xc0, 2, 0x6000, 0x801e, 1, c04);
+	keep_on_fetching_validx(gspca_dev, tbl_init_post_alt,
+					ARRAY_SIZE(tbl_init_post_alt), n);
+
+	ctrl_out(gspca_dev, 0x40, 3, 0x6000, 0x0200, 8, dat_post_1);
+
+	ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, 4, dat_post_2);
+	ctrl_out(gspca_dev, 0x40, 3, 0x6000, 0x0200, 8, dat_post_3);
+
+	ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, 4, dat_post_4);
+	ctrl_out(gspca_dev, 0x40, 3, 0x6000, 0x0200, 8, dat_post_5);
+
+	ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, 4, dat_post_6);
+	ctrl_out(gspca_dev, 0x40, 3, 0x6000, 0x0200, 8, dat_post_7);
+
+	ctrl_out(gspca_dev, 0x40, 3, 0x6000, 0x0200, 8, dat_post_8);
+
+	ov9655_camera_settings(gspca_dev);
+
+	return 0;
+}
+
+static int ov9655_configure_alt(struct gspca_dev *gspca_dev)
+{
+	s32 reso = gspca_dev->cam.cam_mode[(s32) gspca_dev->curr_mode].priv;
+
+	switch (reso) {
+	case IMAGE_640:
+		gspca_dev->alt = 1 + 1;
+		break;
+
+	default:
+		gspca_dev->alt = 1 + 1;
+		break;
+	}
+	return 0;
+}
+
+static int ov9655_camera_settings(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	u8 dat_bright[] = "\x04\x00\x10\x7c\xa1\x00\x00\x70";
+
+	s32 bright = sd->vcur.brightness;
+	s32 hue    = sd->vcur.hue;
+
+	if (bright != sd->vold.brightness) {
+		sd->vold.brightness = bright;
+		if (bright < 0 || bright > sd->vmax.brightness)
+			bright = 0;
+
+		dat_bright[3] = bright;
+		ctrl_out(gspca_dev, 0x40, 3, 0x6000, 0x0200, 8, dat_bright);
+	}
+
+	if (hue != sd->vold.hue) {
+		sd->vold.hue = hue;
+		sd->swapRB = (hue != 0);
+	}
+
+	return 0;
+}
+
+static void ov9655_post_unset_alt(struct gspca_dev *gspca_dev)
+{
+	ctrl_out(gspca_dev, 0x40, 5, 0x0000, 0x0000, 0, NULL);
+	ctrl_out(gspca_dev, 0x40, 1, 0x0061, 0x0000, 0, NULL);
+}
diff --git a/drivers/media/video/gspca/gl860/gl860.c b/drivers/media/video/gspca/gl860/gl860.c
new file mode 100644
index 00000000000..62f4320fd9d
--- /dev/null
+++ b/drivers/media/video/gspca/gl860/gl860.c
@@ -0,0 +1,783 @@
+/* @file gl860.c
+ * @date 2009-08-27
+ *
+ * Genesys Logic webcam with gl860 subdrivers
+ *
+ * Driver by Olivier Lorin <o.lorin@laposte.net>
+ * GSPCA by Jean-Francois Moine <http://moinejf.free.fr>
+ * Thanks BUGabundo and Malmostoso for your amazing help!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "gspca.h"
+#include "gl860.h"
+
+MODULE_AUTHOR("Olivier Lorin <lorin@laposte.net>");
+MODULE_DESCRIPTION("GSPCA/Genesys Logic GL860 USB Camera Driver");
+MODULE_LICENSE("GPL");
+
+/*======================== static function declarations ====================*/
+
+static void (*dev_init_settings)(struct gspca_dev *gspca_dev);
+
+static int  sd_config(struct gspca_dev *gspca_dev,
+			const struct usb_device_id *id);
+static int  sd_init(struct gspca_dev *gspca_dev);
+static int  sd_isoc_init(struct gspca_dev *gspca_dev);
+static int  sd_start(struct gspca_dev *gspca_dev);
+static void sd_stop0(struct gspca_dev *gspca_dev);
+static void sd_pkt_scan(struct gspca_dev *gspca_dev,
+			struct gspca_frame *frame, u8 *data, s32 len);
+static void sd_callback(struct gspca_dev *gspca_dev);
+
+static int gl860_guess_sensor(struct gspca_dev *gspca_dev,
+				s32 vendor_id, s32 product_id);
+
+/*============================ driver options ==============================*/
+
+static s32 AC50Hz = 0xff;
+module_param(AC50Hz, int, 0644);
+MODULE_PARM_DESC(AC50Hz, " Does AC power frequency is 50Hz? (0/1)");
+
+static char sensor[7];
+module_param_string(sensor, sensor, sizeof(sensor), 0644);
+MODULE_PARM_DESC(sensor,
+		" Driver sensor ('MI1320'/'MI2020'/'OV9655'/'OV2640'/'')");
+
+/*============================ webcam controls =============================*/
+
+/* Functions to get and set a control value */
+#define SD_SETGET(thename) \
+static int sd_set_##thename(struct gspca_dev *gspca_dev, s32 val)\
+{\
+	struct sd *sd = (struct sd *) gspca_dev;\
+\
+	sd->vcur.thename = val;\
+	if (gspca_dev->streaming)\
+		sd->dev_camera_settings(gspca_dev);\
+	return 0;\
+} \
+static int sd_get_##thename(struct gspca_dev *gspca_dev, s32 *val)\
+{\
+	struct sd *sd = (struct sd *) gspca_dev;\
+\
+	*val = sd->vcur.thename;\
+	return 0;\
+}
+
+SD_SETGET(mirror)
+SD_SETGET(flip)
+SD_SETGET(AC50Hz)
+SD_SETGET(backlight)
+SD_SETGET(brightness)
+SD_SETGET(gamma)
+SD_SETGET(hue)
+SD_SETGET(saturation)
+SD_SETGET(sharpness)
+SD_SETGET(whitebal)
+SD_SETGET(contrast)
+
+#define GL860_NCTRLS 11
+
+/* control table */
+static struct ctrl sd_ctrls_mi1320[GL860_NCTRLS];
+static struct ctrl sd_ctrls_mi2020[GL860_NCTRLS];
+static struct ctrl sd_ctrls_mi2020b[GL860_NCTRLS];
+static struct ctrl sd_ctrls_ov2640[GL860_NCTRLS];
+static struct ctrl sd_ctrls_ov9655[GL860_NCTRLS];
+
+#define SET_MY_CTRL(theid, \
+	thetype, thelabel, thename) \
+	if (sd->vmax.thename != 0) {\
+		sd_ctrls[nCtrls].qctrl.id   = theid;\
+		sd_ctrls[nCtrls].qctrl.type = thetype;\
+		strcpy(sd_ctrls[nCtrls].qctrl.name, thelabel);\
+		sd_ctrls[nCtrls].qctrl.minimum = 0;\
+		sd_ctrls[nCtrls].qctrl.maximum = sd->vmax.thename;\
+		sd_ctrls[nCtrls].qctrl.default_value = sd->vcur.thename;\
+		sd_ctrls[nCtrls].qctrl.step = \
+			(sd->vmax.thename < 16) ? 1 : sd->vmax.thename/16;\
+		sd_ctrls[nCtrls].set = sd_set_##thename;\
+		sd_ctrls[nCtrls].get = sd_get_##thename;\
+		nCtrls++;\
+	}
+
+static int gl860_build_control_table(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	struct ctrl *sd_ctrls;
+	int nCtrls = 0;
+
+	if (_MI1320_)
+		sd_ctrls = sd_ctrls_mi1320;
+	else if (_MI2020_)
+		sd_ctrls = sd_ctrls_mi2020;
+	else if (_MI2020b_)
+		sd_ctrls = sd_ctrls_mi2020b;
+	else if (_OV2640_)
+		sd_ctrls = sd_ctrls_ov2640;
+	else if (_OV9655_)
+		sd_ctrls = sd_ctrls_ov9655;
+
+	memset(sd_ctrls, 0, GL860_NCTRLS * sizeof(struct ctrl));
+
+	SET_MY_CTRL(V4L2_CID_BRIGHTNESS,
+		V4L2_CTRL_TYPE_INTEGER, "Brightness", brightness)
+	SET_MY_CTRL(V4L2_CID_SHARPNESS,
+		V4L2_CTRL_TYPE_INTEGER, "Sharpness", sharpness)
+	SET_MY_CTRL(V4L2_CID_CONTRAST,
+		V4L2_CTRL_TYPE_INTEGER, "Contrast", contrast)
+	SET_MY_CTRL(V4L2_CID_GAMMA,
+		V4L2_CTRL_TYPE_INTEGER, "Gamma", gamma)
+	SET_MY_CTRL(V4L2_CID_HUE,
+		V4L2_CTRL_TYPE_INTEGER, "Palette", hue)
+	SET_MY_CTRL(V4L2_CID_SATURATION,
+		V4L2_CTRL_TYPE_INTEGER, "Saturation", saturation)
+	SET_MY_CTRL(V4L2_CID_WHITE_BALANCE_TEMPERATURE,
+		V4L2_CTRL_TYPE_INTEGER, "White Bal.", whitebal)
+	SET_MY_CTRL(V4L2_CID_BACKLIGHT_COMPENSATION,
+		V4L2_CTRL_TYPE_INTEGER, "Backlight" , backlight)
+
+	SET_MY_CTRL(V4L2_CID_HFLIP,
+		V4L2_CTRL_TYPE_BOOLEAN, "Mirror", mirror)
+	SET_MY_CTRL(V4L2_CID_VFLIP,
+		V4L2_CTRL_TYPE_BOOLEAN, "Flip", flip)
+	SET_MY_CTRL(V4L2_CID_POWER_LINE_FREQUENCY,
+		V4L2_CTRL_TYPE_BOOLEAN, "50Hz", AC50Hz)
+
+	return nCtrls;
+}
+
+/*==================== sud-driver structure initialisation =================*/
+
+static struct sd_desc sd_desc_mi1320 = {
+	.name        = MODULE_NAME,
+	.ctrls       = sd_ctrls_mi1320,
+	.nctrls      = GL860_NCTRLS,
+	.config      = sd_config,
+	.init        = sd_init,
+	.isoc_init   = sd_isoc_init,
+	.start       = sd_start,
+	.stop0       = sd_stop0,
+	.pkt_scan    = sd_pkt_scan,
+	.dq_callback = sd_callback,
+};
+
+static struct sd_desc sd_desc_mi2020 = {
+	.name        = MODULE_NAME,
+	.ctrls       = sd_ctrls_mi2020,
+	.nctrls      = GL860_NCTRLS,
+	.config      = sd_config,
+	.init        = sd_init,
+	.isoc_init   = sd_isoc_init,
+	.start       = sd_start,
+	.stop0       = sd_stop0,
+	.pkt_scan    = sd_pkt_scan,
+	.dq_callback = sd_callback,
+};
+
+static struct sd_desc sd_desc_mi2020b = {
+	.name        = MODULE_NAME,
+	.ctrls       = sd_ctrls_mi2020b,
+	.nctrls      = GL860_NCTRLS,
+	.config      = sd_config,
+	.init        = sd_init,
+	.isoc_init   = sd_isoc_init,
+	.start       = sd_start,
+	.stop0       = sd_stop0,
+	.pkt_scan    = sd_pkt_scan,
+	.dq_callback = sd_callback,
+};
+
+static struct sd_desc sd_desc_ov2640 = {
+	.name        = MODULE_NAME,
+	.ctrls       = sd_ctrls_ov2640,
+	.nctrls      = GL860_NCTRLS,
+	.config      = sd_config,
+	.init        = sd_init,
+	.isoc_init   = sd_isoc_init,
+	.start       = sd_start,
+	.stop0       = sd_stop0,
+	.pkt_scan    = sd_pkt_scan,
+	.dq_callback = sd_callback,
+};
+
+static struct sd_desc sd_desc_ov9655 = {
+	.name        = MODULE_NAME,
+	.ctrls       = sd_ctrls_ov9655,
+	.nctrls      = GL860_NCTRLS,
+	.config      = sd_config,
+	.init        = sd_init,
+	.isoc_init   = sd_isoc_init,
+	.start       = sd_start,
+	.stop0       = sd_stop0,
+	.pkt_scan    = sd_pkt_scan,
+	.dq_callback = sd_callback,
+};
+
+/*=========================== sub-driver image sizes =======================*/
+
+static struct v4l2_pix_format mi2020_mode[] = {
+	{ 640,  480, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE,
+		.bytesperline = 640,
+		.sizeimage = 640 * 480,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 0
+	},
+	{ 800,  600, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE,
+		.bytesperline = 800,
+		.sizeimage = 800 * 600,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 1
+	},
+	{1280, 1024, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE,
+		.bytesperline = 1280,
+		.sizeimage = 1280 * 1024,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 2
+	},
+	{1600, 1200, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE,
+		.bytesperline = 1600,
+		.sizeimage = 1600 * 1200,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 3
+	},
+};
+
+static struct v4l2_pix_format ov2640_mode[] = {
+	{ 640,  480, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE,
+		.bytesperline = 640,
+		.sizeimage = 640 * 480,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 0
+	},
+	{ 800,  600, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE,
+		.bytesperline = 800,
+		.sizeimage = 800 * 600,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 1
+	},
+	{1280,  960, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE,
+		.bytesperline = 1280,
+		.sizeimage = 1280 * 960,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 2
+	},
+	{1600, 1200, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE,
+		.bytesperline = 1600,
+		.sizeimage = 1600 * 1200,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 3
+	},
+};
+
+static struct v4l2_pix_format mi1320_mode[] = {
+	{ 640,  480, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE,
+		.bytesperline = 640,
+		.sizeimage = 640 * 480,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 0
+	},
+	{ 800,  600, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE,
+		.bytesperline = 800,
+		.sizeimage = 800 * 600,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 1
+	},
+	{1280,  960, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE,
+		.bytesperline = 1280,
+		.sizeimage = 1280 * 960,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 2
+	},
+};
+
+static struct v4l2_pix_format ov9655_mode[] = {
+	{ 640,  480, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE,
+		.bytesperline = 640,
+		.sizeimage = 640 * 480,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 0
+	},
+	{1280,  960, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE,
+		.bytesperline = 1280,
+		.sizeimage = 1280 * 960,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 1
+	},
+};
+
+/*========================= sud-driver functions ===========================*/
+
+/* This function is called at probe time */
+static int sd_config(struct gspca_dev *gspca_dev,
+			const struct usb_device_id *id)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	struct cam *cam;
+	s32 vendor_id, product_id;
+
+	/* Get USB VendorID and ProductID */
+	vendor_id  = le16_to_cpu(id->idVendor);
+	product_id = le16_to_cpu(id->idProduct);
+
+	sd->nbRightUp = 1;
+	sd->nbIm = -1;
+
+	sd->sensor = 0xff;
+	if (strcmp(sensor, "MI1320") == 0)
+		sd->sensor = ID_MI1320;
+	else if (strcmp(sensor, "OV2640") == 0)
+		sd->sensor = ID_OV2640;
+	else if (strcmp(sensor, "OV9655") == 0)
+		sd->sensor = ID_OV9655;
+	else if (strcmp(sensor, "MI2020") == 0)
+		sd->sensor = ID_MI2020;
+	else if (strcmp(sensor, "MI2020b") == 0)
+		sd->sensor = ID_MI2020b;
+
+	/* Get sensor and set the suitable init/start/../stop functions */
+	if (gl860_guess_sensor(gspca_dev, vendor_id, product_id) == -1)
+		return -1;
+
+	cam = &gspca_dev->cam;
+	gspca_dev->nbalt = 4;
+
+	switch (sd->sensor) {
+	case ID_MI1320:
+		gspca_dev->sd_desc = &sd_desc_mi1320;
+		cam->cam_mode = mi1320_mode;
+		cam->nmodes = ARRAY_SIZE(mi1320_mode);
+		dev_init_settings   = mi1320_init_settings;
+		break;
+
+	case ID_MI2020:
+		gspca_dev->sd_desc = &sd_desc_mi2020;
+		cam->cam_mode = mi2020_mode;
+		cam->nmodes = ARRAY_SIZE(mi2020_mode);
+		dev_init_settings   = mi2020_init_settings;
+		break;
+
+	case ID_MI2020b:
+		gspca_dev->sd_desc = &sd_desc_mi2020b;
+		cam->cam_mode = mi2020_mode;
+		cam->nmodes = ARRAY_SIZE(mi2020_mode);
+		dev_init_settings   = mi2020_init_settings;
+		break;
+
+	case ID_OV2640:
+		gspca_dev->sd_desc = &sd_desc_ov2640;
+		cam->cam_mode = ov2640_mode;
+		cam->nmodes = ARRAY_SIZE(ov2640_mode);
+		dev_init_settings   = ov2640_init_settings;
+		break;
+
+	case ID_OV9655:
+		gspca_dev->sd_desc = &sd_desc_ov9655;
+		cam->cam_mode = ov9655_mode;
+		cam->nmodes = ARRAY_SIZE(ov9655_mode);
+		dev_init_settings   = ov9655_init_settings;
+		break;
+	}
+
+	dev_init_settings(gspca_dev);
+	if (AC50Hz != 0xff)
+		((struct sd *) gspca_dev)->vcur.AC50Hz = AC50Hz;
+	gl860_build_control_table(gspca_dev);
+
+	return 0;
+}
+
+/* This function is called at probe time after sd_config */
+static int sd_init(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	return sd->dev_init_at_startup(gspca_dev);
+}
+
+/* This function is called before to choose the alt setting */
+static int sd_isoc_init(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	return sd->dev_configure_alt(gspca_dev);
+}
+
+/* This function is called to start the webcam */
+static int sd_start(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	return sd->dev_init_pre_alt(gspca_dev);
+}
+
+/* This function is called to stop the webcam */
+static void sd_stop0(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	return sd->dev_post_unset_alt(gspca_dev);
+}
+
+/* This function is called when an image is being received */
+static void sd_pkt_scan(struct gspca_dev *gspca_dev,
+			struct gspca_frame *frame, u8 *data, s32 len)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	static s32 nSkipped;
+
+	s32 mode = (s32) gspca_dev->curr_mode;
+	s32 nToSkip =
+		sd->swapRB * (gspca_dev->cam.cam_mode[mode].bytesperline + 1);
+
+	/* Test only against 0202h, so endianess does not matter */
+	switch (*(s16 *) data) {
+	case 0x0202:		/* End of frame, start a new one */
+		frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame, data, 0);
+		nSkipped = 0;
+		if (sd->nbIm >= 0 && sd->nbIm < 10)
+			sd->nbIm++;
+		gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, 0);
+		break;
+
+	default:
+		data += 2;
+		len  -= 2;
+		if (nSkipped + len <= nToSkip)
+			nSkipped += len;
+		else {
+			if (nSkipped < nToSkip && nSkipped + len > nToSkip) {
+				data += nToSkip - nSkipped;
+				len  -= nToSkip - nSkipped;
+				nSkipped = nToSkip + 1;
+			}
+			gspca_frame_add(gspca_dev,
+				INTER_PACKET, frame, data, len);
+		}
+		break;
+	}
+}
+
+/* This function is called when an image has been read */
+/* This function is used to monitor webcam orientation */
+static void sd_callback(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	if (!_OV9655_) {
+		u8 state;
+		u8 upsideDown;
+
+		/* Probe sensor orientation */
+		ctrl_in(gspca_dev, 0xc0, 2, 0x0000, 0x0000, 1, (void *)&state);
+
+		/* C8/40 means upside-down (looking backwards) */
+		/* D8/50 means right-up (looking onwards) */
+		upsideDown = (state == 0xc8 || state == 0x40);
+
+		if (upsideDown && sd->nbRightUp > -4) {
+			if (sd->nbRightUp > 0)
+				sd->nbRightUp = 0;
+			if (sd->nbRightUp == -3) {
+				sd->mirrorMask = 1;
+				sd->waitSet = 1;
+			}
+			sd->nbRightUp--;
+		}
+		if (!upsideDown && sd->nbRightUp < 4) {
+			if (sd->nbRightUp  < 0)
+				sd->nbRightUp = 0;
+			if (sd->nbRightUp == 3) {
+				sd->mirrorMask = 0;
+				sd->waitSet = 1;
+			}
+			sd->nbRightUp++;
+		}
+	}
+
+	if (sd->waitSet)
+		sd->dev_camera_settings(gspca_dev);
+}
+
+/*=================== USB driver structure initialisation ==================*/
+
+static const __devinitdata struct usb_device_id device_table[] = {
+	{USB_DEVICE(0x05e3, 0x0503)},
+	{USB_DEVICE(0x05e3, 0xf191)},
+	{}
+};
+
+MODULE_DEVICE_TABLE(usb, device_table);
+
+static int sd_probe(struct usb_interface *intf,
+				const struct usb_device_id *id)
+{
+	struct gspca_dev *gspca_dev;
+	s32 ret;
+
+	ret = gspca_dev_probe(intf, id,
+			&sd_desc_mi1320, sizeof(struct sd), THIS_MODULE);
+
+	if (ret >= 0) {
+		gspca_dev = usb_get_intfdata(intf);
+
+		PDEBUG(D_PROBE,
+			"Camera is now controlling video device /dev/video%d",
+			gspca_dev->vdev.minor);
+	}
+
+	return ret;
+}
+
+static void sd_disconnect(struct usb_interface *intf)
+{
+	gspca_disconnect(intf);
+}
+
+static struct usb_driver sd_driver = {
+	.name       = MODULE_NAME,
+	.id_table   = device_table,
+	.probe      = sd_probe,
+	.disconnect = sd_disconnect,
+#ifdef CONFIG_PM
+	.suspend    = gspca_suspend,
+	.resume     = gspca_resume,
+#endif
+};
+
+/*====================== Init and Exit module functions ====================*/
+
+static int __init sd_mod_init(void)
+{
+	PDEBUG(D_PROBE, "driver startup - version %s", DRIVER_VERSION);
+
+	if (usb_register(&sd_driver) < 0)
+		return -1;
+	PDEBUG(D_PROBE, "driver registered");
+
+	return 0;
+}
+
+static void __exit sd_mod_exit(void)
+{
+	usb_deregister(&sd_driver);
+	PDEBUG(D_PROBE, "driver deregistered");
+}
+
+module_init(sd_mod_init);
+module_exit(sd_mod_exit);
+
+/*==========================================================================*/
+
+int gl860_RTx(struct gspca_dev *gspca_dev,
+		unsigned char pref, u32 req, u16 val, u16 index,
+		s32 len, void *pdata)
+{
+	struct usb_device *udev = gspca_dev->dev;
+	s32 r = 0;
+
+	if (pref == 0x40) { /* Send */
+		if (len > 0) {
+			memcpy(gspca_dev->usb_buf, pdata, len);
+			r = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+					req, pref, val, index,
+					gspca_dev->usb_buf,
+					len, 400 + 200 * (len > 1));
+		} else {
+			r = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+					req, pref, val, index, NULL, len, 400);
+		}
+	} else { /* Receive */
+		if (len > 0) {
+			r = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+					req, pref, val, index,
+					gspca_dev->usb_buf,
+					len, 400 + 200 * (len > 1));
+			memcpy(pdata, gspca_dev->usb_buf, len);
+		} else {
+			r = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+					req, pref, val, index, NULL, len, 400);
+		}
+	}
+
+	if (r < 0)
+		PDEBUG(D_ERR,
+			"ctrl transfer failed %4d "
+			"[p%02x r%d v%04x i%04x len%d]",
+			r, pref, req, val, index, len);
+	else if (len > 1 && r < len)
+		PDEBUG(D_ERR, "short ctrl transfer %d/%d", r, len);
+
+	if ((_MI2020_ || _MI2020b_ || _MI2020c_) && (val || index))
+		msleep(1);
+	if (_OV2640_)
+		msleep(1);
+
+	return r;
+}
+
+int fetch_validx(struct gspca_dev *gspca_dev, struct validx *tbl, int len)
+{
+	int n;
+
+	for (n = 0; n < len; n++) {
+		if (tbl[n].idx != 0xffff)
+			ctrl_out(gspca_dev, 0x40, 1, tbl[n].val,
+					tbl[n].idx, 0, NULL);
+		else if (tbl[n].val == 0xffff)
+			break;
+		else
+			msleep(tbl[n].val);
+	}
+	return n;
+}
+
+int keep_on_fetching_validx(struct gspca_dev *gspca_dev, struct validx *tbl,
+				int len, int n)
+{
+	while (++n < len) {
+		if (tbl[n].idx != 0xffff)
+			ctrl_out(gspca_dev, 0x40, 1, tbl[n].val, tbl[n].idx,
+					0, NULL);
+		else if (tbl[n].val == 0xffff)
+			break;
+		else
+			msleep(tbl[n].val);
+	}
+	return n;
+}
+
+void fetch_idxdata(struct gspca_dev *gspca_dev, struct idxdata *tbl, int len)
+{
+	int n;
+
+	for (n = 0; n < len; n++) {
+		if (memcmp(tbl[n].data, "\xff\xff\xff", 3) != 0)
+			ctrl_out(gspca_dev, 0x40, 3, 0x7a00, tbl[n].idx,
+					3, tbl[n].data);
+		else
+			msleep(tbl[n].idx);
+	}
+}
+
+static int gl860_guess_sensor(struct gspca_dev *gspca_dev,
+				s32 vendor_id, s32 product_id)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	u8 probe, nb26, nb96, nOV, ntry;
+
+	if (product_id == 0xf191)
+		sd->sensor = ID_MI1320;
+
+	if (sd->sensor == 0xff) {
+		ctrl_in(gspca_dev, 0xc0, 2, 0x0000, 0x0004, 1, &probe);
+		ctrl_in(gspca_dev, 0xc0, 2, 0x0000, 0x0004, 1, &probe);
+
+		ctrl_out(gspca_dev, 0x40, 1, 0x0000, 0x0000, 0, NULL);
+		msleep(3);
+		ctrl_out(gspca_dev, 0x40, 1, 0x0010, 0x0010, 0, NULL);
+		msleep(3);
+		ctrl_out(gspca_dev, 0x40, 1, 0x0008, 0x00c0, 0, NULL);
+		msleep(3);
+		ctrl_out(gspca_dev, 0x40, 1, 0x0001, 0x00c1, 0, NULL);
+		msleep(3);
+		ctrl_out(gspca_dev, 0x40, 1, 0x0001, 0x00c2, 0, NULL);
+		msleep(3);
+		ctrl_out(gspca_dev, 0x40, 1, 0x0020, 0x0006, 0, NULL);
+		msleep(3);
+		ctrl_out(gspca_dev, 0x40, 1, 0x006a, 0x000d, 0, NULL);
+		msleep(56);
+
+		nOV = 0;
+		for (ntry = 0; ntry < 4; ntry++) {
+			ctrl_out(gspca_dev, 0x40, 1, 0x0040, 0x0000, 0, NULL);
+			msleep(3);
+			ctrl_out(gspca_dev, 0x40, 1, 0x0063, 0x0006, 0, NULL);
+			msleep(3);
+			ctrl_out(gspca_dev, 0x40, 1, 0x7a00, 0x8030, 0, NULL);
+			msleep(10);
+			ctrl_in(gspca_dev, 0xc0, 2, 0x7a00, 0x8030, 1, &probe);
+			PDEBUG(D_PROBE, "1st probe=%02x", probe);
+			if (probe == 0xff)
+				nOV++;
+		}
+
+		if (nOV) {
+			PDEBUG(D_PROBE, "0xff -> sensor OVXXXX");
+			PDEBUG(D_PROBE, "Probing for sensor OV2640 or OV9655");
+
+			nb26 = nb96 = 0;
+			for (ntry = 0; ntry < 4; ntry++) {
+				ctrl_out(gspca_dev, 0x40, 1, 0x0040, 0x0000,
+						0, NULL);
+				msleep(3);
+				ctrl_out(gspca_dev, 0x40, 1, 0x6000, 0x800a,
+						0, NULL);
+				msleep(10);
+				/* Wait for 26(OV2640) or 96(OV9655) */
+				ctrl_in(gspca_dev, 0xc0, 2, 0x6000, 0x800a,
+						1, &probe);
+
+				PDEBUG(D_PROBE, "2nd probe=%02x", probe);
+				if (probe == 0x00)
+					nb26++;
+				if (probe == 0x26 || probe == 0x40) {
+					sd->sensor = ID_OV2640;
+					nb26 += 4;
+					break;
+				}
+				if (probe == 0x96 || probe == 0x55) {
+					sd->sensor = ID_OV9655;
+					nb96 += 4;
+					break;
+				}
+				if (probe == 0xff)
+					nb96++;
+				msleep(3);
+			}
+			if (nb26 < 4 && nb96 < 4) {
+				PDEBUG(D_PROBE, "No relevant answer ");
+				PDEBUG(D_PROBE, "* 1.3Mpixels -> use OV9655");
+				PDEBUG(D_PROBE, "* 2.0Mpixels -> use OV2640");
+				PDEBUG(D_PROBE,
+					"To force a sensor, add that line to "
+					"/etc/modprobe.d/options.conf:");
+				PDEBUG(D_PROBE, "options gspca_gl860 "
+					"sensor=\"OV2640\" or \"OV9655\"");
+				return -1;
+			}
+		} else { /* probe = 0 */
+			PDEBUG(D_PROBE, "No 0xff -> sensor MI2020");
+			sd->sensor = ID_MI2020;
+		}
+	}
+
+	if (_MI1320_) {
+		PDEBUG(D_PROBE, "05e3:f191 sensor MI1320 (1.3M)");
+	} else if (_MI2020_) {
+		PDEBUG(D_PROBE, "05e3:0503 sensor MI2020 (2.0M)");
+	} else if (_MI2020b_) {
+		PDEBUG(D_PROBE, "05e3:0503 sensor MI2020 alt. driver (2.0M)");
+	} else if (_OV9655_) {
+		PDEBUG(D_PROBE, "05e3:0503 sensor OV9655 (1.3M)");
+	} else if (_OV2640_) {
+		PDEBUG(D_PROBE, "05e3:0503 sensor OV2640 (2.0M)");
+	} else {
+		PDEBUG(D_PROBE, "***** Unknown sensor *****");
+		return -1;
+	}
+
+	return 0;
+}
diff --git a/drivers/media/video/gspca/gl860/gl860.h b/drivers/media/video/gspca/gl860/gl860.h
new file mode 100644
index 00000000000..cef4e24c1e6
--- /dev/null
+++ b/drivers/media/video/gspca/gl860/gl860.h
@@ -0,0 +1,108 @@
+/* @file gl860.h
+ * @author Olivier LORIN, tiré du pilote Syntek par Nicolas VIVIEN
+ * @date 2009-08-27
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef GL860_DEV_H
+#define GL860_DEV_H
+#include <linux/version.h>
+
+#include "gspca.h"
+
+#define MODULE_NAME "gspca_gl860"
+#define DRIVER_VERSION "0.9d10"
+
+#define ctrl_in  gl860_RTx
+#define ctrl_out gl860_RTx
+
+#define ID_MI1320   1
+#define ID_OV2640   2
+#define ID_OV9655   4
+#define ID_MI2020   8
+#define ID_MI2020b 16
+
+#define _MI1320_  (((struct sd *) gspca_dev)->sensor == ID_MI1320)
+#define _MI2020_  (((struct sd *) gspca_dev)->sensor == ID_MI2020)
+#define _MI2020b_ (((struct sd *) gspca_dev)->sensor == ID_MI2020b)
+#define _MI2020c_ 0
+#define _OV2640_  (((struct sd *) gspca_dev)->sensor == ID_OV2640)
+#define _OV9655_  (((struct sd *) gspca_dev)->sensor == ID_OV9655)
+
+#define IMAGE_640   0
+#define IMAGE_800   1
+#define IMAGE_1280  2
+#define IMAGE_1600 3
+
+struct sd_gl860 {
+	u16 backlight;
+	u16 brightness;
+	u16 sharpness;
+	u16 contrast;
+	u16 gamma;
+	u16 hue;
+	u16 saturation;
+	u16 whitebal;
+	u8  mirror;
+	u8  flip;
+	u8  AC50Hz;
+};
+
+/* Specific webcam descriptor */
+struct sd {
+	struct gspca_dev gspca_dev;	/* !! must be the first item */
+
+	struct sd_gl860 vcur;
+	struct sd_gl860 vold;
+	struct sd_gl860 vmax;
+
+	int  (*dev_configure_alt)  (struct gspca_dev *);
+	int  (*dev_init_at_startup)(struct gspca_dev *);
+	int  (*dev_init_pre_alt)   (struct gspca_dev *);
+	void (*dev_post_unset_alt) (struct gspca_dev *);
+	int  (*dev_camera_settings)(struct gspca_dev *);
+
+	u8   swapRB;
+	u8  mirrorMask;
+	u8  sensor;
+	s32 nbIm;
+	s32 nbRightUp;
+	u8   waitSet;
+};
+
+struct validx {
+	u16 val;
+	u16 idx;
+};
+
+struct idxdata {
+	u8 idx;
+	u8 data[3];
+};
+
+int fetch_validx(struct gspca_dev *gspca_dev, struct validx *tbl, int len);
+int keep_on_fetching_validx(struct gspca_dev *gspca_dev, struct validx *tbl,
+				int len, int n);
+void fetch_idxdata(struct gspca_dev *gspca_dev, struct idxdata *tbl, int len);
+
+int gl860_RTx(struct gspca_dev *gspca_dev,
+			unsigned char pref, u32 req, u16 val, u16 index,
+			s32 len, void *pdata);
+
+void mi1320_init_settings(struct gspca_dev *);
+void ov2640_init_settings(struct gspca_dev *);
+void ov9655_init_settings(struct gspca_dev *);
+void mi2020_init_settings(struct gspca_dev *);
+
+#endif
-- 
cgit v1.2.3


From 8386c27f4786482c569a0f53f78ca6624068ba10 Mon Sep 17 00:00:00 2001
From: Abylay Ospan <aospan@netup.ru>
Date: Wed, 16 Sep 2009 13:08:06 -0300
Subject: V4L/DVB (12956): Fix gpio mutex in NetUP Dual DVB-S2 CI card.

The card uses the same cx23885 gpio lines for two adapters.
In case of there is several cards in system we must implement
gpio mutex per cx23885 chip.

Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx23885/cimax2.c       | 12 ++++++------
 drivers/media/video/cx23885/cx23885-core.c |  1 +
 drivers/media/video/cx23885/cx23885.h      |  1 +
 3 files changed, 8 insertions(+), 6 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/cx23885/cimax2.c b/drivers/media/video/cx23885/cimax2.c
index 0316257b734..c04222ffb28 100644
--- a/drivers/media/video/cx23885/cimax2.c
+++ b/drivers/media/video/cx23885/cimax2.c
@@ -75,7 +75,6 @@ struct netup_ci_state {
 	void *priv;
 };
 
-struct mutex gpio_mutex;/* Two CiMax's uses same GPIO lines */
 
 int netup_read_i2c(struct i2c_adapter *i2c_adap, u8 addr, u8 reg,
 						u8 *buf, int len)
@@ -183,10 +182,11 @@ int netup_ci_op_cam(struct dvb_ca_en50221 *en50221, int slot,
 	if (ret != 0)
 		return ret;
 
-	mutex_lock(&gpio_mutex);
+	mutex_lock(&dev->gpio_lock);
 
 	/* write addr */
 	cx_write(MC417_OEN, NETUP_EN_ALL);
+	msleep(2);
 	cx_write(MC417_RWD, NETUP_CTRL_OFF |
 				NETUP_ADLO | (0xff & addr));
 	cx_clear(MC417_RWD, NETUP_ADLO);
@@ -194,9 +194,10 @@ int netup_ci_op_cam(struct dvb_ca_en50221 *en50221, int slot,
 				NETUP_ADHI | (0xff & (addr >> 8)));
 	cx_clear(MC417_RWD, NETUP_ADHI);
 
-	if (read) /* data in */
+	if (read) { /* data in */
 		cx_write(MC417_OEN, NETUP_EN_ALL | NETUP_DATA);
-	else /* data out */
+		msleep(2);
+	} else /* data out */
 		cx_write(MC417_RWD, NETUP_CTRL_OFF | data);
 
 	/* choose chip */
@@ -206,7 +207,7 @@ int netup_ci_op_cam(struct dvb_ca_en50221 *en50221, int slot,
 	cx_clear(MC417_RWD, (read) ? NETUP_RD : NETUP_WR);
 	mem = netup_ci_get_mem(dev);
 
-	mutex_unlock(&gpio_mutex);
+	mutex_unlock(&dev->gpio_lock);
 
 	if (!read)
 		if (mem < 0)
@@ -403,7 +404,6 @@ int netup_ci_init(struct cx23885_tsport *port)
 	switch (port->nr) {
 	case 1:
 		state->ci_i2c_addr = 0x40;
-		mutex_init(&gpio_mutex);
 		break;
 	case 2:
 		state->ci_i2c_addr = 0x41;
diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c
index 40d438d7234..c31284ba19d 100644
--- a/drivers/media/video/cx23885/cx23885-core.c
+++ b/drivers/media/video/cx23885/cx23885-core.c
@@ -758,6 +758,7 @@ static int cx23885_dev_setup(struct cx23885_dev *dev)
 	int i;
 
 	mutex_init(&dev->lock);
+	mutex_init(&dev->gpio_lock);
 
 	atomic_inc(&dev->refcount);
 
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index 86f26947bb7..bee689104a2 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -325,6 +325,7 @@ struct cx23885_dev {
 
 	int                        nr;
 	struct mutex               lock;
+	struct mutex               gpio_lock;
 
 	/* board details */
 	unsigned int               board;
-- 
cgit v1.2.3


From 2034188a0bff7bd80ae0e0201e03d5a6cb37a153 Mon Sep 17 00:00:00 2001
From: Abylay Ospan <aospan@netup.ru>
Date: Wed, 16 Sep 2009 14:11:15 -0300
Subject: V4L/DVB (12957): Fix MAC address reading from EEPROM in NetUP Dual
 DVB-S2 CI card.

Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx23885/netup-eeprom.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/cx23885/netup-eeprom.c b/drivers/media/video/cx23885/netup-eeprom.c
index 042bbbbd48f..98a48f50068 100644
--- a/drivers/media/video/cx23885/netup-eeprom.c
+++ b/drivers/media/video/cx23885/netup-eeprom.c
@@ -97,11 +97,11 @@ void netup_get_card_info(struct i2c_adapter *i2c_adap,
 {
 	int i, j;
 
-	cinfo->rev =  netup_eeprom_read(i2c_adap, 13);
+	cinfo->rev =  netup_eeprom_read(i2c_adap, 63);
 
-	for (i = 0, j = 0; i < 6; i++, j++)
+	for (i = 64, j = 0; i < 70; i++, j++)
 		cinfo->port[0].mac[j] =  netup_eeprom_read(i2c_adap, i);
 
-	for (i = 6, j = 0; i < 12; i++, j++)
+	for (i = 70, j = 0; i < 76; i++, j++)
 		cinfo->port[1].mac[j] =  netup_eeprom_read(i2c_adap, i);
 };
-- 
cgit v1.2.3


From ab69333690c9e0f278d5ca1dab4e76015f7ecc66 Mon Sep 17 00:00:00 2001
From: Antti Palosaari <crope@iki.fi>
Date: Wed, 16 Sep 2009 19:47:01 -0300
Subject: V4L/DVB (12959): anysee: increase BULK transfer size from 512 to 8192

increase BULK transfer size from 512 to 8192 to increase wakeups

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/dvb-usb/anysee.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c
index 7381aff4dcf..f9d3e063626 100644
--- a/drivers/media/dvb/dvb-usb/anysee.c
+++ b/drivers/media/dvb/dvb-usb/anysee.c
@@ -511,7 +511,7 @@ static struct dvb_usb_device_properties anysee_properties = {
 				.endpoint = 0x82,
 				.u = {
 					.bulk = {
-						.buffersize = 512,
+						.buffersize = (16*512),
 					}
 				}
 			},
-- 
cgit v1.2.3


From ae3745f63ad28233d23f3a2f7407b95717d0dba8 Mon Sep 17 00:00:00 2001
From: Antti Palosaari <crope@iki.fi>
Date: Wed, 16 Sep 2009 19:50:25 -0300
Subject: V4L/DVB (12960): anysee: coding style fix

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/dvb-usb/anysee.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c
index f9d3e063626..2ae7f648eff 100644
--- a/drivers/media/dvb/dvb-usb/anysee.c
+++ b/drivers/media/dvb/dvb-usb/anysee.c
@@ -203,11 +203,11 @@ static struct i2c_algorithm anysee_i2c_algo = {
 
 static int anysee_mt352_demod_init(struct dvb_frontend *fe)
 {
-	static u8 clock_config []  = { CLOCK_CTL,  0x38, 0x28 };
-	static u8 reset []         = { RESET,      0x80 };
-	static u8 adc_ctl_1_cfg [] = { ADC_CTL_1,  0x40 };
-	static u8 agc_cfg []       = { AGC_TARGET, 0x28, 0x20 };
-	static u8 gpp_ctl_cfg []   = { GPP_CTL,    0x33 };
+	static u8 clock_config[]   = { CLOCK_CTL,  0x38, 0x28 };
+	static u8 reset[]          = { RESET,      0x80 };
+	static u8 adc_ctl_1_cfg[]  = { ADC_CTL_1,  0x40 };
+	static u8 agc_cfg[]        = { AGC_TARGET, 0x28, 0x20 };
+	static u8 gpp_ctl_cfg[]    = { GPP_CTL,    0x33 };
 	static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 };
 
 	mt352_write(fe, clock_config,   sizeof(clock_config));
@@ -485,7 +485,7 @@ static int anysee_probe(struct usb_interface *intf,
 	return ret;
 }
 
-static struct usb_device_id anysee_table [] = {
+static struct usb_device_id anysee_table[] = {
 	{ USB_DEVICE(USB_VID_CYPRESS, USB_PID_ANYSEE) },
 	{ USB_DEVICE(USB_VID_AMT,     USB_PID_ANYSEE) },
 	{ }		/* Terminating entry */
-- 
cgit v1.2.3


From eb3b2d89bcd7bbdcff46f427d0f6f85c9e88701d Mon Sep 17 00:00:00 2001
From: Antti Palosaari <crope@iki.fi>
Date: Wed, 16 Sep 2009 20:21:52 -0300
Subject: V4L/DVB (12962): ce6230: increase BULK transfer size from 512 to 8192

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/dvb-usb/ce6230.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/dvb-usb/ce6230.c b/drivers/media/dvb/dvb-usb/ce6230.c
index 52badc00e67..0737c637789 100644
--- a/drivers/media/dvb/dvb-usb/ce6230.c
+++ b/drivers/media/dvb/dvb-usb/ce6230.c
@@ -274,7 +274,7 @@ static struct dvb_usb_device_properties ce6230_properties = {
 				.endpoint = 0x82,
 				.u = {
 					.bulk = {
-						.buffersize = 512,
+						.buffersize = (16*512),
 					}
 				}
 			},
-- 
cgit v1.2.3


From 93463895ae0a87b689d71d65c44d5ccdcd950dc4 Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@kernellabs.com>
Date: Tue, 15 Sep 2009 23:04:18 -0300
Subject: V4L/DVB (12964): tuner-core: add support for NXP TDA18271 without
 TDA829X demod

Add support for NXP TDA18271 as a standalone tuner, allowing the use of
analog demodulators other than the Philips/NXP TDA829x.

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/common/tuners/tuner-types.c |  4 ++++
 drivers/media/video/tuner-core.c          | 12 ++++++++++++
 2 files changed, 16 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/common/tuners/tuner-types.c b/drivers/media/common/tuners/tuner-types.c
index a2204df796e..2b876f3988c 100644
--- a/drivers/media/common/tuners/tuner-types.c
+++ b/drivers/media/common/tuners/tuner-types.c
@@ -1801,6 +1801,10 @@ struct tunertype tuners[] = {
 		.count  = ARRAY_SIZE(tuner_philips_cu1216l_params),
 		.stepsize = 62500,
 	},
+	[TUNER_NXP_TDA18271] = {
+		.name   = "NXP TDA18271",
+		/* see tda18271-fe.c for details */
+	},
 };
 EXPORT_SYMBOL(tuners);
 
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index 2816f183923..aba92e2313d 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -29,6 +29,7 @@
 #include "tuner-simple.h"
 #include "tda9887.h"
 #include "xc5000.h"
+#include "tda18271.h"
 
 #define UNSET (-1U)
 
@@ -420,6 +421,17 @@ static void set_type(struct i2c_client *c, unsigned int type,
 			goto attach_failed;
 		break;
 	}
+	case TUNER_NXP_TDA18271:
+	{
+		struct tda18271_config cfg = {
+			.config = t->config,
+		};
+
+		if (!dvb_attach(tda18271_attach, &t->fe, t->i2c->addr,
+				t->i2c->adapter, &cfg))
+			goto attach_failed;
+		break;
+	}
 	default:
 		if (!dvb_attach(simple_tuner_attach, &t->fe,
 				t->i2c->adapter, t->i2c->addr, t->type))
-- 
cgit v1.2.3


From 6d052dda59775cbb984f547efc600c188bef12a2 Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@kernellabs.com>
Date: Sun, 6 Sep 2009 10:58:42 -0300
Subject: V4L/DVB (12967): saa7164: fix Kconfig: rename DVB_FE_CUSTOMIZE to
 MEDIA_TUNER_CUSTOMISE

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7164/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7164/Kconfig b/drivers/media/video/saa7164/Kconfig
index 582556792bd..4e3fd060b8c 100644
--- a/drivers/media/video/saa7164/Kconfig
+++ b/drivers/media/video/saa7164/Kconfig
@@ -9,7 +9,7 @@ config VIDEO_SAA7164
 	select VIDEOBUF_DVB
 	select DVB_TDA10048 if !DVB_FE_CUSTOMISE
 	select DVB_S5H1411 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE
+	select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMISE
 	---help---
 	  This is a video4linux driver for NXP SAA7164 based
 	  TV cards.
-- 
cgit v1.2.3


From 66cb930e957ccab9e51a7896b13e16d5caf31b0e Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@kernellabs.com>
Date: Sun, 6 Sep 2009 10:59:47 -0300
Subject: V4L/DVB (12968): saa7164: fix Kconfig: remove HOTPLUG dependency

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7164/Kconfig | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7164/Kconfig b/drivers/media/video/saa7164/Kconfig
index 4e3fd060b8c..35326372517 100644
--- a/drivers/media/video/saa7164/Kconfig
+++ b/drivers/media/video/saa7164/Kconfig
@@ -1,7 +1,6 @@
 config VIDEO_SAA7164
 	tristate "NXP SAA7164 support"
 	depends on DVB_CORE && PCI && I2C
-	depends on HOTPLUG	# due to FW_LOADER
 	select I2C_ALGOBIT
 	select FW_LOADER
 	select VIDEO_TUNER
-- 
cgit v1.2.3


From 6df84ea86e3ae331bd692fb4fbf8b75f43bb4262 Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@kernellabs.com>
Date: Sun, 6 Sep 2009 11:13:09 -0300
Subject: V4L/DVB (12970): saa7164: fix 64bit build warning

Fix the following build warning:

  CC [M]  saa7164-core.o
saa7164-core.c: In function 'saa7164_buffer_deliver':
saa7164-core.c:113: warning: passing argument 2 of 'dvb_dmx_swfilter_packets'
		    from incompatible pointer type

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7164/saa7164-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7164/saa7164-core.c b/drivers/media/video/saa7164/saa7164-core.c
index 4e0df60d29c..f0dbead188c 100644
--- a/drivers/media/video/saa7164/saa7164-core.c
+++ b/drivers/media/video/saa7164/saa7164-core.c
@@ -77,7 +77,7 @@ static void saa7164_buffer_deliver(struct saa7164_buffer *buf)
 	struct saa7164_tsport *port = buf->port;
 
 	/* Feed the transport payload into the kernel demux */
-	dvb_dmx_swfilter_packets(&port->dvb.demux, buf->cpu,
+	dvb_dmx_swfilter_packets(&port->dvb.demux, (u8 *)buf->cpu,
 		SAA7164_TS_NUMBER_OF_LINES);
 
 }
-- 
cgit v1.2.3


From c9230457a98f33fe3658fd0bd9b9ceffdd97b63b Mon Sep 17 00:00:00 2001
From: Steven Toth <stoth@kernellabs.com>
Date: Thu, 17 Sep 2009 15:05:38 -0300
Subject: V4L/DVB (12974): SAA7164: Remove the SAA7164 bus id, no longer
 required.

SAA7164: Remove the SAA7164 bus id, no longer required.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7164/saa7164-i2c.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7164/saa7164-i2c.c b/drivers/media/video/saa7164/saa7164-i2c.c
index 4c431b4ac8d..8198e6833f7 100644
--- a/drivers/media/video/saa7164/saa7164-i2c.c
+++ b/drivers/media/video/saa7164/saa7164-i2c.c
@@ -116,7 +116,6 @@ static struct i2c_algorithm saa7164_i2c_algo_template = {
 static struct i2c_adapter saa7164_i2c_adap_template = {
 	.name              = "saa7164",
 	.owner             = THIS_MODULE,
-	.id                = I2C_HW_B_SAA7164,
 	.algo              = &saa7164_i2c_algo_template,
 	.client_register   = attach_inform,
 	.client_unregister = detach_inform,
-- 
cgit v1.2.3


From efac8aaa8e747b1c1e9eff12b3d3c26f92e26018 Mon Sep 17 00:00:00 2001
From: Steven Toth <stoth@kernellabs.com>
Date: Thu, 17 Sep 2009 15:06:45 -0300
Subject: V4L/DVB (12975): SAA7164: Remove the i2c client_attach/detach
 support, no longer required.

SAA7164: Remove the i2c client_attach/detach support, no longer required.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7164/saa7164-i2c.c | 25 -------------------------
 1 file changed, 25 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7164/saa7164-i2c.c b/drivers/media/video/saa7164/saa7164-i2c.c
index 8198e6833f7..bc138773355 100644
--- a/drivers/media/video/saa7164/saa7164-i2c.c
+++ b/drivers/media/video/saa7164/saa7164-i2c.c
@@ -69,29 +69,6 @@ static int i2c_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num)
 	return retval;
 }
 
-static int attach_inform(struct i2c_client *client)
-{
-	struct saa7164_i2c *bus = i2c_get_adapdata(client->adapter);
-	struct saa7164_dev *dev = bus->dev;
-
-	dprintk(DBGLVL_I2C, "%s i2c attach [addr=0x%x,client=%s]\n",
-		client->driver->driver.name, client->addr, client->name);
-
-	if (!client->driver->command)
-		return 0;
-
-	return 0;
-}
-
-static int detach_inform(struct i2c_client *client)
-{
-	struct saa7164_dev *dev = i2c_get_adapdata(client->adapter);
-
-	dprintk(DBGLVL_I2C, "i2c detach [client=%s]\n", client->name);
-
-	return 0;
-}
-
 void saa7164_call_i2c_clients(struct saa7164_i2c *bus, unsigned int cmd,
 	void *arg)
 {
@@ -117,8 +94,6 @@ static struct i2c_adapter saa7164_i2c_adap_template = {
 	.name              = "saa7164",
 	.owner             = THIS_MODULE,
 	.algo              = &saa7164_i2c_algo_template,
-	.client_register   = attach_inform,
-	.client_unregister = detach_inform,
 };
 
 static struct i2c_client saa7164_i2c_client_template = {
-- 
cgit v1.2.3


From b8298e7e588dc906adc358179349841d58f6f580 Mon Sep 17 00:00:00 2001
From: Steven Toth <stoth@kernellabs.com>
Date: Thu, 17 Sep 2009 21:00:40 -0300
Subject: V4L/DVB (12976): SAA7164: Removed bus registration messages from
 driver startup

SAA7164: Removed bus registration messages from driver startup

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7164/saa7164-i2c.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7164/saa7164-i2c.c b/drivers/media/video/saa7164/saa7164-i2c.c
index bc138773355..e1ae9b01bf0 100644
--- a/drivers/media/video/saa7164/saa7164-i2c.c
+++ b/drivers/media/video/saa7164/saa7164-i2c.c
@@ -127,10 +127,7 @@ int saa7164_i2c_register(struct saa7164_i2c *bus)
 
 	bus->i2c_client.adapter = &bus->i2c_adap;
 
-	if (0 == bus->i2c_rc) {
-		printk(KERN_ERR "%s: i2c bus %d registered\n",
-			dev->name, bus->nr);
-	} else
+	if (0 != bus->i2c_rc)
 		printk(KERN_ERR "%s: i2c bus %d register FAILED\n",
 			dev->name, bus->nr);
 
-- 
cgit v1.2.3


From cbd1f7fb7059c629cb9e5131a755febc906496a6 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Erik=20Andr=C3=A9n?= <erik.andren@gmail.com>
Date: Wed, 17 Jun 2009 03:11:24 -0300
Subject: V4L/DVB (12977): gspca - m5602-ov7660: Create blue gain control
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Hook up a blue gain v4l2 controller

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/m5602/m5602_ov7660.c | 43 ++++++++++++++++++++++++++
 drivers/media/video/gspca/m5602/m5602_ov7660.h | 20 +++++-------
 2 files changed, 51 insertions(+), 12 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/m5602/m5602_ov7660.c b/drivers/media/video/gspca/m5602/m5602_ov7660.c
index 7aafeb7cfa0..8125c5b6cfc 100644
--- a/drivers/media/video/gspca/m5602/m5602_ov7660.c
+++ b/drivers/media/video/gspca/m5602/m5602_ov7660.c
@@ -20,6 +20,8 @@
 
 static int ov7660_get_gain(struct gspca_dev *gspca_dev, __s32 *val);
 static int ov7660_set_gain(struct gspca_dev *gspca_dev, __s32 val);
+static int ov7660_get_blue_gain(struct gspca_dev *gspca_dev, __s32 *val);
+static int ov7660_set_blue_gain(struct gspca_dev *gspca_dev, __s32 val);
 
 const static struct ctrl ov7660_ctrls[] = {
 #define GAIN_IDX 1
@@ -37,6 +39,22 @@ const static struct ctrl ov7660_ctrls[] = {
 		.set = ov7660_set_gain,
 		.get = ov7660_get_gain
 	},
+#define BLUE_BALANCE_IDX 2
+	{
+		{
+			.id		= V4L2_CID_BLUE_BALANCE,
+			.type		= V4L2_CTRL_TYPE_INTEGER,
+			.name		= "blue balance",
+			.minimum	= 0x00,
+			.maximum	= 0x7f,
+			.step		= 0x1,
+			.default_value	= OV7660_DEFAULT_BLUE_GAIN,
+			.flags		= V4L2_CTRL_FLAG_SLIDER
+		},
+		.set = ov7660_set_blue_gain,
+		.get = ov7660_get_blue_gain
+	},
+
 };
 
 static struct v4l2_pix_format ov7660_modes[] = {
@@ -194,6 +212,31 @@ static int ov7660_set_gain(struct gspca_dev *gspca_dev, __s32 val)
 	return err;
 }
 
+static int ov7660_get_blue_gain(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	*val = sensor_settings[BLUE_BALANCE_IDX];
+	PDEBUG(D_V4L2, "Read blue balance %d", *val);
+	return 0;
+}
+
+static int ov7660_set_blue_gain(struct gspca_dev *gspca_dev, __s32 val)
+{
+	int err;
+	u8 i2c_data;
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	PDEBUG(D_V4L2, "Setting blue balance to %d", val);
+
+	sensor_settings[BLUE_BALANCE_IDX] = val;
+
+	err = m5602_write_sensor(sd, OV7660_BLUE_GAIN, &i2c_data, 1);
+	return err;
+}
+
 static void ov7660_dump_registers(struct sd *sd)
 {
 	int address;
diff --git a/drivers/media/video/gspca/m5602/m5602_ov7660.h b/drivers/media/video/gspca/m5602/m5602_ov7660.h
index 3f2c169a93e..d2589d654a1 100644
--- a/drivers/media/video/gspca/m5602/m5602_ov7660.h
+++ b/drivers/media/video/gspca/m5602/m5602_ov7660.h
@@ -66,23 +66,23 @@
 #define OV7660_RBIAS		0x2c
 #define OV7660_HREF		0x32
 #define OV7660_ADC		0x37
-#define OV7660_OFON 		0x39
-#define OV7660_TSLB 		0x3a
-#define OV7660_COM12 		0x3c
-#define OV7660_COM13 		0x3d
+#define OV7660_OFON		0x39
+#define OV7660_TSLB		0x3a
+#define OV7660_COM12		0x3c
+#define OV7660_COM13		0x3d
 #define OV7660_LCC1		0x62
 #define OV7660_LCC2		0x63
 #define OV7660_LCC3		0x64
 #define OV7660_LCC4		0x65
 #define OV7660_LCC5		0x66
-#define OV7660_HV 		0x69
-#define OV7660_RSVDA1 		0xa1
+#define OV7660_HV		0x69
+#define OV7660_RSVDA1		0xa1
 
 #define OV7660_DEFAULT_GAIN		0x0e
-#define OV7660_DEFAULT_RED_GAIN	0x80
+#define OV7660_DEFAULT_RED_GAIN		0x80
 #define OV7660_DEFAULT_BLUE_GAIN 	0x80
 #define OV7660_DEFAULT_SATURATION	0x00
-#define OV7660_DEFAULT_EXPOSURE	0x20
+#define OV7660_DEFAULT_EXPOSURE		0x20
 
 /* Kernel module parameters */
 extern int force_sensor;
@@ -199,8 +199,6 @@ static const unsigned char init_ov7660[][4] =
 
 	{SENSOR, OV7660_COM7, 0x80},
 	{SENSOR, OV7660_CLKRC, 0x80},
-	{SENSOR, OV7660_BLUE_GAIN, 0x80},
-	{SENSOR, OV7660_RED_GAIN, 0x80},
 	{SENSOR, OV7660_COM9, 0x4c},
 	{SENSOR, OV7660_OFON, 0x43},
 	{SENSOR, OV7660_COM12, 0x28},
@@ -264,8 +262,6 @@ static const unsigned char init_ov7660[][4] =
 	{SENSOR, OV7660_OFON, 0x0c},
 	{SENSOR, OV7660_COM2, 0x11},
 	{SENSOR, OV7660_COM7, 0x05},
-	{SENSOR, OV7660_BLUE_GAIN, 0x80},
-	{SENSOR, OV7660_RED_GAIN, 0x80},
 
 	{BRIDGE, M5602_XB_GPIO_DIR, 0x01},
 	{BRIDGE, M5602_XB_GPIO_DAT, 0x04},
-- 
cgit v1.2.3


From 68fdb7a5b52cb060f7824f9d6e98e105af36a474 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Erik=20Andr=C3=A9n?= <erik.andren@gmail.com>
Date: Wed, 17 Jun 2009 03:14:12 -0300
Subject: V4L/DVB (12978): gspca - m5602-ov7660: Add red gain control
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Hook up the red gain controller

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/m5602/m5602_ov7660.c | 43 +++++++++++++++++++++++++-
 1 file changed, 42 insertions(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/m5602/m5602_ov7660.c b/drivers/media/video/gspca/m5602/m5602_ov7660.c
index 8125c5b6cfc..9d0cf2ccd1f 100644
--- a/drivers/media/video/gspca/m5602/m5602_ov7660.c
+++ b/drivers/media/video/gspca/m5602/m5602_ov7660.c
@@ -22,6 +22,8 @@ static int ov7660_get_gain(struct gspca_dev *gspca_dev, __s32 *val);
 static int ov7660_set_gain(struct gspca_dev *gspca_dev, __s32 val);
 static int ov7660_get_blue_gain(struct gspca_dev *gspca_dev, __s32 *val);
 static int ov7660_set_blue_gain(struct gspca_dev *gspca_dev, __s32 val);
+static int ov7660_get_red_gain(struct gspca_dev *gspca_dev, __s32 *val);
+static int ov7660_set_red_gain(struct gspca_dev *gspca_dev, __s32 val);
 
 const static struct ctrl ov7660_ctrls[] = {
 #define GAIN_IDX 1
@@ -54,7 +56,21 @@ const static struct ctrl ov7660_ctrls[] = {
 		.set = ov7660_set_blue_gain,
 		.get = ov7660_get_blue_gain
 	},
-
+#define RED_BALANCE_IDX 3
+	{
+		{
+			.id		= V4L2_CID_RED_BALANCE,
+			.type		= V4L2_CTRL_TYPE_INTEGER,
+			.name		= "red balance",
+			.minimum	= 0x00,
+			.maximum	= 0x7f,
+			.step		= 0x1,
+			.default_value	= OV7660_DEFAULT_RED_GAIN,
+			.flags		= V4L2_CTRL_FLAG_SLIDER
+		},
+		.set = ov7660_set_red_gain,
+		.get = ov7660_get_red_gain
+	},
 };
 
 static struct v4l2_pix_format ov7660_modes[] = {
@@ -237,6 +253,31 @@ static int ov7660_set_blue_gain(struct gspca_dev *gspca_dev, __s32 val)
 	return err;
 }
 
+static int ov7660_get_red_gain(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	*val = sensor_settings[RED_BALANCE_IDX];
+	PDEBUG(D_V4L2, "Read red balance %d", *val);
+	return 0;
+}
+
+static int ov7660_set_red_gain(struct gspca_dev *gspca_dev, __s32 val)
+{
+	int err;
+	u8 i2c_data;
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	PDEBUG(D_V4L2, "Setting red balance to %d", val);
+
+	sensor_settings[RED_BALANCE_IDX] = val;
+
+	err = m5602_write_sensor(sd, OV7660_RED_GAIN, &i2c_data, 1);
+	return err;
+}
+
 static void ov7660_dump_registers(struct sd *sd)
 {
 	int address;
-- 
cgit v1.2.3


From a94e2f2cb91678f106fb31e6fa58b7af451a42e9 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Erik=20Andr=C3=A9n?= <erik.andren@gmail.com>
Date: Wed, 17 Jun 2009 13:01:07 -0300
Subject: V4L/DVB (12979): gspca - m5602-ov7660: Ensure that the default
 exposure is set
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Ensure that the default exposure value is set at startup

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/m5602/m5602_ov7660.h | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/m5602/m5602_ov7660.h b/drivers/media/video/gspca/m5602/m5602_ov7660.h
index d2589d654a1..8027b64b7d5 100644
--- a/drivers/media/video/gspca/m5602/m5602_ov7660.h
+++ b/drivers/media/video/gspca/m5602/m5602_ov7660.h
@@ -218,7 +218,6 @@ static const unsigned char init_ov7660[][4] =
 	{SENSOR, OV7660_RSVD29, 0x98},
 	{SENSOR, OV7660_RBIAS, 0x98},
 	{SENSOR, OV7660_COM1, 0x00},
-	{SENSOR, OV7660_AECH, 0x00},
 	{SENSOR, OV7660_AECHH, 0x00},
 	{SENSOR, OV7660_ADC, 0x04},
 	{SENSOR, OV7660_COM13, 0x00},
@@ -257,11 +256,10 @@ static const unsigned char init_ov7660[][4] =
 	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
 	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
 
-	{SENSOR, OV7660_AECH, 0x20},
 	{SENSOR, OV7660_COM1, 0x00},
 	{SENSOR, OV7660_OFON, 0x0c},
-	{SENSOR, OV7660_COM2, 0x11},
-	{SENSOR, OV7660_COM7, 0x05},
+	{SENSOR, OV7660_COM2, 0x11}, /* Soft sleep, 2x Drive */
+	{SENSOR, OV7660_COM7, 0x05}, /* Raw RGB */
 
 	{BRIDGE, M5602_XB_GPIO_DIR, 0x01},
 	{BRIDGE, M5602_XB_GPIO_DAT, 0x04},
-- 
cgit v1.2.3


From f1f59fe60e38c4c56b8acba9690cd08d86d2ac0e Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Erik=20Andr=C3=A9n?= <erik.andren@gmail.com>
Date: Sat, 20 Jun 2009 08:01:27 -0300
Subject: V4L/DVB (12980): gspca - m5602-ov7660: Create auto white balance ctrl
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/m5602/m5602_ov7660.c | 54 ++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/m5602/m5602_ov7660.c b/drivers/media/video/gspca/m5602/m5602_ov7660.c
index 9d0cf2ccd1f..00f8365db1a 100644
--- a/drivers/media/video/gspca/m5602/m5602_ov7660.c
+++ b/drivers/media/video/gspca/m5602/m5602_ov7660.c
@@ -24,6 +24,11 @@ static int ov7660_get_blue_gain(struct gspca_dev *gspca_dev, __s32 *val);
 static int ov7660_set_blue_gain(struct gspca_dev *gspca_dev, __s32 val);
 static int ov7660_get_red_gain(struct gspca_dev *gspca_dev, __s32 *val);
 static int ov7660_set_red_gain(struct gspca_dev *gspca_dev, __s32 val);
+static int ov7660_get_auto_white_balance(struct gspca_dev *gspca_dev,
+					 __s32 *val);
+static int ov7660_set_auto_white_balance(struct gspca_dev *gspca_dev,
+					 __s32 val);
+
 
 const static struct ctrl ov7660_ctrls[] = {
 #define GAIN_IDX 1
@@ -71,6 +76,21 @@ const static struct ctrl ov7660_ctrls[] = {
 		.set = ov7660_set_red_gain,
 		.get = ov7660_get_red_gain
 	},
+#define AUTO_WHITE_BALANCE_IDX 4
+	{
+		{
+			.id 		= V4L2_CID_AUTO_WHITE_BALANCE,
+			.type 		= V4L2_CTRL_TYPE_BOOLEAN,
+			.name 		= "auto white balance",
+			.minimum 	= 0,
+			.maximum 	= 1,
+			.step 		= 1,
+			.default_value 	= 1
+		},
+		.set = ov7660_set_auto_white_balance,
+		.get = ov7660_get_auto_white_balance
+	},
+
 };
 
 static struct v4l2_pix_format ov7660_modes[] = {
@@ -182,6 +202,9 @@ int ov7660_init(struct sd *sd)
 	if (err < 0)
 		return err;
 
+	err = ov7660_set_auto_white_balance(&sd->gspca_dev,
+		sensor_settings[AUTO_WHITE_BALANCE_IDX]);
+
 	return err;
 }
 
@@ -278,6 +301,37 @@ static int ov7660_set_red_gain(struct gspca_dev *gspca_dev, __s32 val)
 	return err;
 }
 
+static int ov7660_get_auto_white_balance(struct gspca_dev *gspca_dev,
+					 __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	*val = sensor_settings[AUTO_WHITE_BALANCE_IDX];
+	return 0;
+}
+
+static int ov7660_set_auto_white_balance(struct gspca_dev *gspca_dev,
+					 __s32 val)
+{
+	int err;
+	u8 i2c_data;
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	PDEBUG(D_V4L2, "Set auto white balance to %d", val);
+
+	sensor_settings[AUTO_WHITE_BALANCE_IDX] = val;
+	err = m5602_read_sensor(sd, OV7660_COM8, &i2c_data, 1);
+	if (err < 0)
+		return err;
+
+	i2c_data = ((i2c_data & 0xfd) | ((val & 0x01) << 1));
+	err = m5602_write_sensor(sd, OV7660_COM8, &i2c_data, 1);
+
+	return err;
+}
+
 static void ov7660_dump_registers(struct sd *sd)
 {
 	int address;
-- 
cgit v1.2.3


From 36e64d5cec0a210d87e8e8c02566a1cbe24c00f3 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Erik=20Andr=C3=A9n?= <erik.andren@gmail.com>
Date: Sat, 20 Jun 2009 08:11:13 -0300
Subject: V4L/DVB (12981): gspca - m5602-ov7660: Set blue and red gain at init
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/m5602/m5602_ov7660.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/m5602/m5602_ov7660.c b/drivers/media/video/gspca/m5602/m5602_ov7660.c
index 00f8365db1a..7d2af089ee9 100644
--- a/drivers/media/video/gspca/m5602/m5602_ov7660.c
+++ b/drivers/media/video/gspca/m5602/m5602_ov7660.c
@@ -204,6 +204,16 @@ int ov7660_init(struct sd *sd)
 
 	err = ov7660_set_auto_white_balance(&sd->gspca_dev,
 		sensor_settings[AUTO_WHITE_BALANCE_IDX]);
+	if (err < 0)
+		return err;
+
+	err = ov7660_set_blue_gain(&sd->gspca_dev,
+		sensor_settings[BLUE_BALANCE_IDX]);
+	if (err < 0)
+		return err;
+
+	err = ov7660_set_red_gain(&sd->gspca_dev,
+		sensor_settings[RED_BALANCE_IDX]);
 
 	return err;
 }
-- 
cgit v1.2.3


From 456ebe4e92063b92d2672da272bfc7ac70bd8bdd Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Erik=20Andr=C3=A9n?= <erik.andren@gmail.com>
Date: Sat, 20 Jun 2009 09:29:00 -0300
Subject: V4L/DVB (12982): gspca - m5602-ov7660: Add auto gain ctrl
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/m5602/m5602_ov7660.c | 51 +++++++++++++++++++++++++-
 1 file changed, 50 insertions(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/m5602/m5602_ov7660.c b/drivers/media/video/gspca/m5602/m5602_ov7660.c
index 7d2af089ee9..855c058d5df 100644
--- a/drivers/media/video/gspca/m5602/m5602_ov7660.c
+++ b/drivers/media/video/gspca/m5602/m5602_ov7660.c
@@ -28,6 +28,8 @@ static int ov7660_get_auto_white_balance(struct gspca_dev *gspca_dev,
 					 __s32 *val);
 static int ov7660_set_auto_white_balance(struct gspca_dev *gspca_dev,
 					 __s32 val);
+static int ov7660_get_auto_gain(struct gspca_dev *gspca_dev, __s32 *val);
+static int ov7660_set_auto_gain(struct gspca_dev *gspca_dev, __s32 val);
 
 
 const static struct ctrl ov7660_ctrls[] = {
@@ -90,7 +92,20 @@ const static struct ctrl ov7660_ctrls[] = {
 		.set = ov7660_set_auto_white_balance,
 		.get = ov7660_get_auto_white_balance
 	},
-
+#define AUTO_GAIN_CTRL_IDX 5
+	{
+		{
+			.id 		= V4L2_CID_AUTOGAIN,
+			.type 		= V4L2_CTRL_TYPE_BOOLEAN,
+			.name 		= "auto gain control",
+			.minimum 	= 0,
+			.maximum 	= 1,
+			.step 		= 1,
+			.default_value 	= 1
+		},
+		.set = ov7660_set_auto_gain,
+		.get = ov7660_get_auto_gain
+	},
 };
 
 static struct v4l2_pix_format ov7660_modes[] = {
@@ -207,6 +222,11 @@ int ov7660_init(struct sd *sd)
 	if (err < 0)
 		return err;
 
+	err = ov7660_set_auto_gain(&sd->gspca_dev,
+		sensor_settings[AUTO_GAIN_CTRL_IDX]);
+	if (err < 0)
+		return err;
+
 	err = ov7660_set_blue_gain(&sd->gspca_dev,
 		sensor_settings[BLUE_BALANCE_IDX]);
 	if (err < 0)
@@ -342,6 +362,35 @@ static int ov7660_set_auto_white_balance(struct gspca_dev *gspca_dev,
 	return err;
 }
 
+static int ov7660_get_auto_gain(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	*val = sensor_settings[AUTO_GAIN_CTRL_IDX];
+	PDEBUG(D_V4L2, "Read auto gain control %d", *val);
+	return 0;
+}
+
+static int ov7660_set_auto_gain(struct gspca_dev *gspca_dev, __s32 val)
+{
+	int err;
+	u8 i2c_data;
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	PDEBUG(D_V4L2, "Set auto gain control to %d", val);
+
+	sensor_settings[AUTO_GAIN_CTRL_IDX] = val;
+	err = m5602_read_sensor(sd, OV7660_COM8, &i2c_data, 1);
+	if (err < 0)
+		return err;
+
+	i2c_data = ((i2c_data & 0xfb) | ((val & 0x01) << 2));
+
+	return m5602_write_sensor(sd, OV7660_COM8, &i2c_data, 1);
+}
+
 static void ov7660_dump_registers(struct sd *sd)
 {
 	int address;
-- 
cgit v1.2.3


From 7c7ddf1638a45923ab053d1f7818c6d123148b4b Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Erik=20Andr=C3=A9n?= <erik.andren@gmail.com>
Date: Sat, 20 Jun 2009 13:58:41 -0300
Subject: V4L/DVB (12983): gspca - m5602-ov7660: Add auto exposure ctrl
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/m5602/m5602_ov7660.c | 52 +++++++++++++++++++++++++-
 1 file changed, 51 insertions(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/m5602/m5602_ov7660.c b/drivers/media/video/gspca/m5602/m5602_ov7660.c
index 855c058d5df..80c64caac35 100644
--- a/drivers/media/video/gspca/m5602/m5602_ov7660.c
+++ b/drivers/media/video/gspca/m5602/m5602_ov7660.c
@@ -30,7 +30,8 @@ static int ov7660_set_auto_white_balance(struct gspca_dev *gspca_dev,
 					 __s32 val);
 static int ov7660_get_auto_gain(struct gspca_dev *gspca_dev, __s32 *val);
 static int ov7660_set_auto_gain(struct gspca_dev *gspca_dev, __s32 val);
-
+static int ov7660_get_auto_exposure(struct gspca_dev *gspca_dev, __s32 *val);
+static int ov7660_set_auto_exposure(struct gspca_dev *gspca_dev, __s32 val);
 
 const static struct ctrl ov7660_ctrls[] = {
 #define GAIN_IDX 1
@@ -106,6 +107,20 @@ const static struct ctrl ov7660_ctrls[] = {
 		.set = ov7660_set_auto_gain,
 		.get = ov7660_get_auto_gain
 	},
+#define AUTO_EXPOSURE_IDX 6
+	{
+		{
+			.id 		= V4L2_CID_EXPOSURE_AUTO,
+			.type 		= V4L2_CTRL_TYPE_BOOLEAN,
+			.name 		= "auto exposure",
+			.minimum 	= 0,
+			.maximum 	= 1,
+			.step 		= 1,
+			.default_value 	= 1
+		},
+		.set = ov7660_set_auto_exposure,
+		.get = ov7660_get_auto_exposure
+	}
 };
 
 static struct v4l2_pix_format ov7660_modes[] = {
@@ -227,6 +242,11 @@ int ov7660_init(struct sd *sd)
 	if (err < 0)
 		return err;
 
+	err = ov7660_set_auto_exposure(&sd->gspca_dev,
+		sensor_settings[AUTO_EXPOSURE_IDX]);
+	if (err < 0)
+		return err;
+
 	err = ov7660_set_blue_gain(&sd->gspca_dev,
 		sensor_settings[BLUE_BALANCE_IDX]);
 	if (err < 0)
@@ -391,6 +411,36 @@ static int ov7660_set_auto_gain(struct gspca_dev *gspca_dev, __s32 val)
 	return m5602_write_sensor(sd, OV7660_COM8, &i2c_data, 1);
 }
 
+static int ov7660_get_auto_exposure(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	*val = sensor_settings[AUTO_EXPOSURE_IDX];
+	PDEBUG(D_V4L2, "Read auto exposure control %d", *val);
+	return 0;
+}
+
+static int ov7660_set_auto_exposure(struct gspca_dev *gspca_dev,
+				    __s32 val)
+{
+	int err;
+	u8 i2c_data;
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	PDEBUG(D_V4L2, "Set auto exposure control to %d", val);
+
+	sensor_settings[AUTO_EXPOSURE_IDX] = val;
+	err = m5602_read_sensor(sd, OV7660_COM8, &i2c_data, 1);
+	if (err < 0)
+		return err;
+
+	i2c_data = ((i2c_data & 0xfe) | ((val & 0x01) << 0));
+
+	return m5602_write_sensor(sd, OV7660_COM8, &i2c_data, 1);
+}
+
 static void ov7660_dump_registers(struct sd *sd)
 {
 	int address;
-- 
cgit v1.2.3


From bf40b382f6ce53cdee48917d14b13ae004c3deab Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Erik=20Andr=C3=A9n?= <erik.andren@gmail.com>
Date: Sun, 21 Jun 2009 14:58:55 -0300
Subject: V4L/DVB (12984): gspca - m5602-ov7660: Use a new raw init
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/m5602/m5602_ov7660.c |  12 +-
 drivers/media/video/gspca/m5602/m5602_ov7660.h | 248 +++++++++++++++++++++++++
 2 files changed, 254 insertions(+), 6 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/m5602/m5602_ov7660.c b/drivers/media/video/gspca/m5602/m5602_ov7660.c
index 80c64caac35..f7c050f2552 100644
--- a/drivers/media/video/gspca/m5602/m5602_ov7660.c
+++ b/drivers/media/video/gspca/m5602/m5602_ov7660.c
@@ -211,17 +211,17 @@ int ov7660_init(struct sd *sd)
 	s32 *sensor_settings = sd->sensor_priv;
 
 	/* Init the sensor */
-	for (i = 0; i < ARRAY_SIZE(init_ov7660); i++) {
+	for (i = 0; i < ARRAY_SIZE(init2_ov7660); i++) {
 		u8 data[2];
 
-		if (init_ov7660[i][0] == BRIDGE) {
+		if (init2_ov7660[i][0] == BRIDGE) {
 			err = m5602_write_bridge(sd,
-				init_ov7660[i][1],
-				init_ov7660[i][2]);
+				init2_ov7660[i][1],
+				init2_ov7660[i][2]);
 		} else {
-			data[0] = init_ov7660[i][2];
+			data[0] = init2_ov7660[i][2];
 			err = m5602_write_sensor(sd,
-					init_ov7660[i][1], data, 1);
+					init2_ov7660[i][1], data, 1);
 		}
 	}
 
diff --git a/drivers/media/video/gspca/m5602/m5602_ov7660.h b/drivers/media/video/gspca/m5602/m5602_ov7660.h
index 8027b64b7d5..eb0b50ed00e 100644
--- a/drivers/media/video/gspca/m5602/m5602_ov7660.h
+++ b/drivers/media/video/gspca/m5602/m5602_ov7660.h
@@ -270,4 +270,252 @@ static const unsigned char init_ov7660[][4] =
 	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}
 };
 
+static const unsigned char init2_ov7660[][4] = {
+	{BRIDGE, 0x13, 0x02},
+	{BRIDGE, 0x12, 0xb0},
+	{BRIDGE, 0x15, 0x00},
+	{BRIDGE, 0x14, 0xb0},
+	{BRIDGE, 0x60, 0xc0},
+	{BRIDGE, 0x00, 0x0d},
+	{BRIDGE, 0x01, 0x00},
+	{BRIDGE, 0x77, 0x01},
+	{BRIDGE, 0x77, 0x01},
+	{BRIDGE, 0x15, 0x00},
+	{BRIDGE, 0x14, 0xb0},
+	{BRIDGE, 0x60, 0xc0},
+	{BRIDGE, 0x00, 0x0c},
+	{BRIDGE, 0x77, 0x05},
+	{BRIDGE, 0x76, 0x00},
+	{BRIDGE, 0x74, 0x06},
+	{BRIDGE, 0x75, 0x00},
+	{SENSOR, 0x12, 0x80},
+	{SENSOR, 0x11, 0x80},
+	{SENSOR, 0x01, 0x80},
+	{SENSOR, 0x02, 0x80},
+	{SENSOR, 0x14, 0x4c},
+	{SENSOR, 0x39, 0x43},
+	{SENSOR, 0x3c, 0x28},
+	{SENSOR, 0x13, 0x00},
+	{SENSOR, 0x15, 0x40},
+	{SENSOR, 0x17, 0x0c},
+	{SENSOR, 0x18, 0x61},
+	{SENSOR, 0x32, 0xa4},
+	{SENSOR, 0x1b, 0x0b},
+	{SENSOR, 0x19, 0x01},
+	{SENSOR, 0x1a, 0x7a},
+	{SENSOR, 0x03, 0x00},
+	{SENSOR, 0x12, 0x05},
+	{SENSOR, 0x0f, 0x42},
+	{SENSOR, 0x27, 0x94},
+	{SENSOR, 0x28, 0x94},
+	{SENSOR, 0x29, 0x94},
+	{SENSOR, 0x2c, 0x94},
+	{SENSOR, 0x04, 0x00},
+	{SENSOR, 0x10, 0x00},
+	{SENSOR, 0x07, 0x00},
+	{SENSOR, 0x37, 0x05},
+	{SENSOR, 0x3d, 0x00},
+	{SENSOR, 0xa1, 0x23},
+	{SENSOR, 0x3a, 0x0d},
+	{SENSOR, 0x69, 0x80},
+	{SENSOR, 0x62, 0x00},
+	{SENSOR, 0x63, 0x00},
+	{SENSOR, 0x64, 0x10},
+	{SENSOR, 0x65, 0x40},
+	{SENSOR, 0x66, 0x01},
+	{BRIDGE, 0x15, 0x06},
+	{BRIDGE, 0x14, 0xb0},
+	{BRIDGE, 0x60, 0xc0},
+	{BRIDGE, 0x00, 0x0c},
+	{BRIDGE, 0x02, 0x81},
+	{BRIDGE, 0x04, 0x82},
+	{BRIDGE, 0x0a, 0x01},
+	{BRIDGE, 0x06, 0x00},
+	{BRIDGE, 0x06, 0x08},
+	{BRIDGE, 0x06, 0x00},
+	{BRIDGE, 0x06, 0x00},
+	{BRIDGE, 0x06, 0x01},
+	{BRIDGE, 0x06, 0xec},
+	{BRIDGE, 0x06, 0x00},
+	{BRIDGE, 0x06, 0x00},
+	{BRIDGE, 0x0a, 0x00},
+	{BRIDGE, 0x0a, 0x02},
+	{BRIDGE, 0x07, 0x00},
+	{BRIDGE, 0x07, 0x27},
+	{BRIDGE, 0x07, 0x02},
+	{BRIDGE, 0x07, 0xae},
+	{BRIDGE, 0x0a, 0x00},
+	{SENSOR, 0x01, 0x80},
+	{SENSOR, 0x02, 0x80},
+	{BRIDGE, 0x15, 0x02},
+	{BRIDGE, 0x14, 0xb0},
+	{SENSOR, 0x10, 0x20},
+	{SENSOR, 0x04, 0x00},
+	{SENSOR, 0x00, 0x07},
+	{SENSOR, 0x39, 0x0c},
+	{SENSOR, 0x09, 0x11},
+	{SENSOR, 0x12, 0x05},
+	{BRIDGE, 0x77, 0x01},
+	{BRIDGE, 0x76, 0x04},
+	{BRIDGE, 0x74, 0x06},
+	{BRIDGE, 0x72, 0x06},
+	{BRIDGE, 0x70, 0x00},
+	{BRIDGE, 0x15, 0x08},
+	{BRIDGE, 0x14, 0xb0},
+	{BRIDGE, 0x15, 0x00},
+	{BRIDGE, 0x14, 0xb0},
+	{BRIDGE, 0x60, 0xc0},
+	{BRIDGE, 0x00, 0x0c},
+	{BRIDGE, 0x77, 0x05},
+	{BRIDGE, 0x76, 0x00},
+	{BRIDGE, 0x74, 0x06},
+	{BRIDGE, 0x75, 0x00},
+	{SENSOR, 0x12, 0x80},
+	{SENSOR, 0x11, 0x80},
+	{SENSOR, 0x01, 0x80},
+	{SENSOR, 0x02, 0x80},
+	{SENSOR, 0x14, 0x4c},
+	{SENSOR, 0x39, 0x43},
+	{SENSOR, 0x3c, 0x28},
+	{SENSOR, 0x13, 0x00},
+	{SENSOR, 0x15, 0x40},
+	{SENSOR, 0x17, 0x0c},
+	{SENSOR, 0x18, 0x61},
+	{SENSOR, 0x32, 0xa4},
+	{SENSOR, 0x1b, 0x0b},
+	{SENSOR, 0x19, 0x01},
+	{SENSOR, 0x1a, 0x7a},
+	{SENSOR, 0x03, 0x00},
+	{SENSOR, 0x12, 0x05},
+	{SENSOR, 0x0f, 0x42},
+	{SENSOR, 0x27, 0x94},
+	{SENSOR, 0x28, 0x94},
+	{SENSOR, 0x29, 0x94},
+	{SENSOR, 0x2c, 0x94},
+	{SENSOR, 0x04, 0x00},
+	{SENSOR, 0x10, 0x00},
+	{SENSOR, 0x07, 0x00},
+	{SENSOR, 0x37, 0x05},
+	{SENSOR, 0x3d, 0x00},
+	{SENSOR, 0xa1, 0x23},
+	{SENSOR, 0x3a, 0x0d},
+	{SENSOR, 0x69, 0x80},
+	{SENSOR, 0x62, 0x00},
+	{SENSOR, 0x63, 0x00},
+	{SENSOR, 0x64, 0x10},
+	{SENSOR, 0x65, 0x40},
+	{SENSOR, 0x66, 0x01},
+	{BRIDGE, 0x15, 0x06},
+	{BRIDGE, 0x14, 0xb0},
+	{BRIDGE, 0x60, 0xc0},
+	{BRIDGE, 0x00, 0x0c},
+	{BRIDGE, 0x02, 0x81},
+	{BRIDGE, 0x04, 0x82},
+	{BRIDGE, 0x0a, 0x01},
+	{BRIDGE, 0x06, 0x00},
+	{BRIDGE, 0x06, 0x08},
+	{BRIDGE, 0x06, 0x00},
+	{BRIDGE, 0x06, 0x00},
+	{BRIDGE, 0x06, 0x01},
+	{BRIDGE, 0x06, 0xec},
+	{BRIDGE, 0x06, 0x00},
+	{BRIDGE, 0x06, 0x00},
+	{BRIDGE, 0x0a, 0x00},
+	{BRIDGE, 0x0a, 0x02},
+	{BRIDGE, 0x07, 0x00},
+	{BRIDGE, 0x07, 0x27},
+	{BRIDGE, 0x07, 0x02},
+	{BRIDGE, 0x07, 0xae},
+	{BRIDGE, 0x0a, 0x00},
+	{SENSOR, 0x01, 0x80},
+	{SENSOR, 0x02, 0x80},
+	{BRIDGE, 0x15, 0x00},
+	{BRIDGE, 0x14, 0xb0},
+	{SENSOR, 0x10, 0x5f},
+	{SENSOR, 0x04, 0x03},
+	{SENSOR, 0x00, 0x02},
+	{SENSOR, 0x39, 0x0c},
+	{SENSOR, 0x09, 0x11},
+	{SENSOR, 0x12, 0x05},
+	{BRIDGE, 0x77, 0x01},
+	{BRIDGE, 0x76, 0x04},
+	{BRIDGE, 0x74, 0x06},
+	{BRIDGE, 0x72, 0x06},
+	{BRIDGE, 0x70, 0x00},
+	{BRIDGE, 0x15, 0x08},
+	{BRIDGE, 0x14, 0xb0},
+	{BRIDGE, 0x15, 0x00},
+	{BRIDGE, 0x14, 0xb0},
+	{BRIDGE, 0x60, 0xc0},
+	{BRIDGE, 0x00, 0x0c},
+	{BRIDGE, 0x77, 0x05},
+	{BRIDGE, 0x76, 0x00},
+	{BRIDGE, 0x74, 0x06},
+	{BRIDGE, 0x75, 0x00},
+	{SENSOR, 0x12, 0x80},
+	{SENSOR, 0x11, 0x80},
+	{SENSOR, 0x01, 0x80},
+	{SENSOR, 0x02, 0x80},
+	{SENSOR, 0x14, 0x4c},
+	{SENSOR, 0x39, 0x43},
+	{SENSOR, 0x3c, 0x28},
+	{SENSOR, 0x13, 0x00},
+	{SENSOR, 0x15, 0x40},
+	{SENSOR, 0x17, 0x0c},
+	{SENSOR, 0x18, 0x61},
+	{SENSOR, 0x32, 0xa4},
+	{SENSOR, 0x1b, 0x0b},
+	{SENSOR, 0x19, 0x01},
+	{SENSOR, 0x1a, 0x7a},
+	{SENSOR, 0x03, 0x00},
+	{SENSOR, 0x12, 0x05},
+	{SENSOR, 0x0f, 0x42},
+	{SENSOR, 0x27, 0x94},
+	{SENSOR, 0x28, 0x94},
+	{SENSOR, 0x29, 0x94},
+	{SENSOR, 0x2c, 0x94},
+	{SENSOR, 0x04, 0x00},
+	{SENSOR, 0x10, 0x00},
+	{SENSOR, 0x07, 0x00},
+	{SENSOR, 0x37, 0x05},
+	{SENSOR, 0x3d, 0x00},
+	{SENSOR, 0xa1, 0x23},
+	{SENSOR, 0x3a, 0x0d},
+	{SENSOR, 0x69, 0x80},
+	{SENSOR, 0x62, 0x00},
+	{SENSOR, 0x63, 0x00},
+	{SENSOR, 0x64, 0x10},
+	{SENSOR, 0x65, 0x40},
+	{SENSOR, 0x66, 0x01},
+	{BRIDGE, 0x15, 0x06},
+	{BRIDGE, 0x14, 0xb0},
+	{BRIDGE, 0x60, 0xc0},
+	{BRIDGE, 0x00, 0x0c},
+	{BRIDGE, 0x02, 0x81},
+	{BRIDGE, 0x04, 0x82},
+	{BRIDGE, 0x0a, 0x01},
+	{BRIDGE, 0x06, 0x00},
+	{BRIDGE, 0x06, 0x08},
+	{BRIDGE, 0x06, 0x00},
+	{BRIDGE, 0x06, 0x00},
+	{BRIDGE, 0x06, 0x01},
+	{BRIDGE, 0x06, 0xec},
+	{BRIDGE, 0x06, 0x00},
+	{BRIDGE, 0x06, 0x00},
+	{BRIDGE, 0x0a, 0x00},
+	{BRIDGE, 0x0a, 0x02},
+	{BRIDGE, 0x07, 0x00},
+	{BRIDGE, 0x07, 0x27},
+	{BRIDGE, 0x07, 0x02},
+	{BRIDGE, 0x07, 0xae},
+	{BRIDGE, 0x0a, 0x00},
+	{SENSOR, 0x01, 0x80},
+	{SENSOR, 0x02, 0x80},
+	{BRIDGE, 0x15, 0x00},
+	{BRIDGE, 0x14, 0xb0},
+	{SENSOR, 0x10, 0x5f},
+	{SENSOR, 0x04, 0x03},
+	{SENSOR, 0x00, 0x02}
+};
+
 #endif
-- 
cgit v1.2.3


From 41532b91daeb7789472bfbdcf3a5a862230482ee Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Erik=20Andr=C3=A9n?= <erik.andren@gmail.com>
Date: Tue, 23 Jun 2009 02:57:05 -0300
Subject: V4L/DVB (12985): gspca - m5602-ov7660: Replace magic constants with
 defines
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/m5602/m5602_ov7660.h | 413 ++++++++++---------------
 1 file changed, 168 insertions(+), 245 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/m5602/m5602_ov7660.h b/drivers/media/video/gspca/m5602/m5602_ov7660.h
index eb0b50ed00e..8fa850c95f3 100644
--- a/drivers/media/video/gspca/m5602/m5602_ov7660.h
+++ b/drivers/media/video/gspca/m5602/m5602_ov7660.h
@@ -271,251 +271,174 @@ static const unsigned char init_ov7660[][4] =
 };
 
 static const unsigned char init2_ov7660[][4] = {
-	{BRIDGE, 0x13, 0x02},
-	{BRIDGE, 0x12, 0xb0},
-	{BRIDGE, 0x15, 0x00},
-	{BRIDGE, 0x14, 0xb0},
-	{BRIDGE, 0x60, 0xc0},
-	{BRIDGE, 0x00, 0x0d},
-	{BRIDGE, 0x01, 0x00},
-	{BRIDGE, 0x77, 0x01},
-	{BRIDGE, 0x77, 0x01},
-	{BRIDGE, 0x15, 0x00},
-	{BRIDGE, 0x14, 0xb0},
-	{BRIDGE, 0x60, 0xc0},
-	{BRIDGE, 0x00, 0x0c},
-	{BRIDGE, 0x77, 0x05},
-	{BRIDGE, 0x76, 0x00},
-	{BRIDGE, 0x74, 0x06},
-	{BRIDGE, 0x75, 0x00},
-	{SENSOR, 0x12, 0x80},
-	{SENSOR, 0x11, 0x80},
-	{SENSOR, 0x01, 0x80},
-	{SENSOR, 0x02, 0x80},
-	{SENSOR, 0x14, 0x4c},
-	{SENSOR, 0x39, 0x43},
-	{SENSOR, 0x3c, 0x28},
-	{SENSOR, 0x13, 0x00},
-	{SENSOR, 0x15, 0x40},
-	{SENSOR, 0x17, 0x0c},
-	{SENSOR, 0x18, 0x61},
-	{SENSOR, 0x32, 0xa4},
-	{SENSOR, 0x1b, 0x0b},
-	{SENSOR, 0x19, 0x01},
-	{SENSOR, 0x1a, 0x7a},
-	{SENSOR, 0x03, 0x00},
-	{SENSOR, 0x12, 0x05},
-	{SENSOR, 0x0f, 0x42},
-	{SENSOR, 0x27, 0x94},
-	{SENSOR, 0x28, 0x94},
-	{SENSOR, 0x29, 0x94},
-	{SENSOR, 0x2c, 0x94},
-	{SENSOR, 0x04, 0x00},
-	{SENSOR, 0x10, 0x00},
-	{SENSOR, 0x07, 0x00},
-	{SENSOR, 0x37, 0x05},
-	{SENSOR, 0x3d, 0x00},
-	{SENSOR, 0xa1, 0x23},
-	{SENSOR, 0x3a, 0x0d},
-	{SENSOR, 0x69, 0x80},
-	{SENSOR, 0x62, 0x00},
-	{SENSOR, 0x63, 0x00},
-	{SENSOR, 0x64, 0x10},
-	{SENSOR, 0x65, 0x40},
-	{SENSOR, 0x66, 0x01},
-	{BRIDGE, 0x15, 0x06},
-	{BRIDGE, 0x14, 0xb0},
-	{BRIDGE, 0x60, 0xc0},
-	{BRIDGE, 0x00, 0x0c},
-	{BRIDGE, 0x02, 0x81},
-	{BRIDGE, 0x04, 0x82},
-	{BRIDGE, 0x0a, 0x01},
-	{BRIDGE, 0x06, 0x00},
-	{BRIDGE, 0x06, 0x08},
-	{BRIDGE, 0x06, 0x00},
-	{BRIDGE, 0x06, 0x00},
-	{BRIDGE, 0x06, 0x01},
-	{BRIDGE, 0x06, 0xec},
-	{BRIDGE, 0x06, 0x00},
-	{BRIDGE, 0x06, 0x00},
-	{BRIDGE, 0x0a, 0x00},
-	{BRIDGE, 0x0a, 0x02},
-	{BRIDGE, 0x07, 0x00},
-	{BRIDGE, 0x07, 0x27},
-	{BRIDGE, 0x07, 0x02},
-	{BRIDGE, 0x07, 0xae},
-	{BRIDGE, 0x0a, 0x00},
-	{SENSOR, 0x01, 0x80},
-	{SENSOR, 0x02, 0x80},
-	{BRIDGE, 0x15, 0x02},
-	{BRIDGE, 0x14, 0xb0},
-	{SENSOR, 0x10, 0x20},
-	{SENSOR, 0x04, 0x00},
-	{SENSOR, 0x00, 0x07},
-	{SENSOR, 0x39, 0x0c},
-	{SENSOR, 0x09, 0x11},
-	{SENSOR, 0x12, 0x05},
-	{BRIDGE, 0x77, 0x01},
-	{BRIDGE, 0x76, 0x04},
-	{BRIDGE, 0x74, 0x06},
-	{BRIDGE, 0x72, 0x06},
-	{BRIDGE, 0x70, 0x00},
-	{BRIDGE, 0x15, 0x08},
-	{BRIDGE, 0x14, 0xb0},
-	{BRIDGE, 0x15, 0x00},
-	{BRIDGE, 0x14, 0xb0},
-	{BRIDGE, 0x60, 0xc0},
-	{BRIDGE, 0x00, 0x0c},
-	{BRIDGE, 0x77, 0x05},
-	{BRIDGE, 0x76, 0x00},
-	{BRIDGE, 0x74, 0x06},
-	{BRIDGE, 0x75, 0x00},
-	{SENSOR, 0x12, 0x80},
-	{SENSOR, 0x11, 0x80},
-	{SENSOR, 0x01, 0x80},
-	{SENSOR, 0x02, 0x80},
-	{SENSOR, 0x14, 0x4c},
-	{SENSOR, 0x39, 0x43},
-	{SENSOR, 0x3c, 0x28},
-	{SENSOR, 0x13, 0x00},
-	{SENSOR, 0x15, 0x40},
-	{SENSOR, 0x17, 0x0c},
-	{SENSOR, 0x18, 0x61},
-	{SENSOR, 0x32, 0xa4},
-	{SENSOR, 0x1b, 0x0b},
-	{SENSOR, 0x19, 0x01},
-	{SENSOR, 0x1a, 0x7a},
-	{SENSOR, 0x03, 0x00},
-	{SENSOR, 0x12, 0x05},
-	{SENSOR, 0x0f, 0x42},
-	{SENSOR, 0x27, 0x94},
-	{SENSOR, 0x28, 0x94},
-	{SENSOR, 0x29, 0x94},
-	{SENSOR, 0x2c, 0x94},
-	{SENSOR, 0x04, 0x00},
-	{SENSOR, 0x10, 0x00},
-	{SENSOR, 0x07, 0x00},
-	{SENSOR, 0x37, 0x05},
-	{SENSOR, 0x3d, 0x00},
-	{SENSOR, 0xa1, 0x23},
-	{SENSOR, 0x3a, 0x0d},
-	{SENSOR, 0x69, 0x80},
-	{SENSOR, 0x62, 0x00},
-	{SENSOR, 0x63, 0x00},
-	{SENSOR, 0x64, 0x10},
-	{SENSOR, 0x65, 0x40},
-	{SENSOR, 0x66, 0x01},
-	{BRIDGE, 0x15, 0x06},
-	{BRIDGE, 0x14, 0xb0},
-	{BRIDGE, 0x60, 0xc0},
-	{BRIDGE, 0x00, 0x0c},
-	{BRIDGE, 0x02, 0x81},
-	{BRIDGE, 0x04, 0x82},
-	{BRIDGE, 0x0a, 0x01},
-	{BRIDGE, 0x06, 0x00},
-	{BRIDGE, 0x06, 0x08},
-	{BRIDGE, 0x06, 0x00},
-	{BRIDGE, 0x06, 0x00},
-	{BRIDGE, 0x06, 0x01},
-	{BRIDGE, 0x06, 0xec},
-	{BRIDGE, 0x06, 0x00},
-	{BRIDGE, 0x06, 0x00},
-	{BRIDGE, 0x0a, 0x00},
-	{BRIDGE, 0x0a, 0x02},
-	{BRIDGE, 0x07, 0x00},
-	{BRIDGE, 0x07, 0x27},
-	{BRIDGE, 0x07, 0x02},
-	{BRIDGE, 0x07, 0xae},
-	{BRIDGE, 0x0a, 0x00},
-	{SENSOR, 0x01, 0x80},
-	{SENSOR, 0x02, 0x80},
-	{BRIDGE, 0x15, 0x00},
-	{BRIDGE, 0x14, 0xb0},
-	{SENSOR, 0x10, 0x5f},
-	{SENSOR, 0x04, 0x03},
-	{SENSOR, 0x00, 0x02},
-	{SENSOR, 0x39, 0x0c},
-	{SENSOR, 0x09, 0x11},
-	{SENSOR, 0x12, 0x05},
-	{BRIDGE, 0x77, 0x01},
-	{BRIDGE, 0x76, 0x04},
-	{BRIDGE, 0x74, 0x06},
-	{BRIDGE, 0x72, 0x06},
-	{BRIDGE, 0x70, 0x00},
-	{BRIDGE, 0x15, 0x08},
-	{BRIDGE, 0x14, 0xb0},
-	{BRIDGE, 0x15, 0x00},
-	{BRIDGE, 0x14, 0xb0},
-	{BRIDGE, 0x60, 0xc0},
-	{BRIDGE, 0x00, 0x0c},
-	{BRIDGE, 0x77, 0x05},
-	{BRIDGE, 0x76, 0x00},
-	{BRIDGE, 0x74, 0x06},
-	{BRIDGE, 0x75, 0x00},
-	{SENSOR, 0x12, 0x80},
-	{SENSOR, 0x11, 0x80},
-	{SENSOR, 0x01, 0x80},
-	{SENSOR, 0x02, 0x80},
-	{SENSOR, 0x14, 0x4c},
-	{SENSOR, 0x39, 0x43},
-	{SENSOR, 0x3c, 0x28},
-	{SENSOR, 0x13, 0x00},
-	{SENSOR, 0x15, 0x40},
-	{SENSOR, 0x17, 0x0c},
-	{SENSOR, 0x18, 0x61},
-	{SENSOR, 0x32, 0xa4},
-	{SENSOR, 0x1b, 0x0b},
-	{SENSOR, 0x19, 0x01},
-	{SENSOR, 0x1a, 0x7a},
-	{SENSOR, 0x03, 0x00},
-	{SENSOR, 0x12, 0x05},
-	{SENSOR, 0x0f, 0x42},
-	{SENSOR, 0x27, 0x94},
-	{SENSOR, 0x28, 0x94},
-	{SENSOR, 0x29, 0x94},
-	{SENSOR, 0x2c, 0x94},
-	{SENSOR, 0x04, 0x00},
-	{SENSOR, 0x10, 0x00},
-	{SENSOR, 0x07, 0x00},
-	{SENSOR, 0x37, 0x05},
-	{SENSOR, 0x3d, 0x00},
-	{SENSOR, 0xa1, 0x23},
-	{SENSOR, 0x3a, 0x0d},
-	{SENSOR, 0x69, 0x80},
-	{SENSOR, 0x62, 0x00},
-	{SENSOR, 0x63, 0x00},
-	{SENSOR, 0x64, 0x10},
-	{SENSOR, 0x65, 0x40},
-	{SENSOR, 0x66, 0x01},
-	{BRIDGE, 0x15, 0x06},
-	{BRIDGE, 0x14, 0xb0},
-	{BRIDGE, 0x60, 0xc0},
-	{BRIDGE, 0x00, 0x0c},
-	{BRIDGE, 0x02, 0x81},
-	{BRIDGE, 0x04, 0x82},
-	{BRIDGE, 0x0a, 0x01},
-	{BRIDGE, 0x06, 0x00},
-	{BRIDGE, 0x06, 0x08},
-	{BRIDGE, 0x06, 0x00},
-	{BRIDGE, 0x06, 0x00},
-	{BRIDGE, 0x06, 0x01},
-	{BRIDGE, 0x06, 0xec},
-	{BRIDGE, 0x06, 0x00},
-	{BRIDGE, 0x06, 0x00},
-	{BRIDGE, 0x0a, 0x00},
-	{BRIDGE, 0x0a, 0x02},
-	{BRIDGE, 0x07, 0x00},
-	{BRIDGE, 0x07, 0x27},
-	{BRIDGE, 0x07, 0x02},
-	{BRIDGE, 0x07, 0xae},
-	{BRIDGE, 0x0a, 0x00},
-	{SENSOR, 0x01, 0x80},
-	{SENSOR, 0x02, 0x80},
-	{BRIDGE, 0x15, 0x00},
-	{BRIDGE, 0x14, 0xb0},
-	{SENSOR, 0x10, 0x5f},
-	{SENSOR, 0x04, 0x03},
-	{SENSOR, 0x00, 0x02}
+	{BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02},
+	{BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0},
+	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
+	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
+	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
+	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0d},
+	{BRIDGE, M5602_XB_SENSOR_CTRL, 0x00},
+	{BRIDGE, M5602_XB_GPIO_DIR, 0x01},
+	{BRIDGE, M5602_XB_GPIO_DIR, 0x01},
+	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
+	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
+	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
+	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
+	{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
+	{BRIDGE, M5602_XB_GPIO_DAT, 0x00},
+	{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
+	{BRIDGE, M5602_XB_GPIO_EN_L, 0x00},
+	{SENSOR, OV7660_COM7, 0x80},
+	{SENSOR, OV7660_CLKRC, 0x80},
+	{SENSOR, OV7660_BLUE_GAIN, 0x80},
+	{SENSOR, OV7660_RED_GAIN, 0x80},
+	{SENSOR, OV7660_COM9, 0x4c},
+	{SENSOR, OV7660_OFON, 0x43},
+	{SENSOR, OV7660_COM12, 0x28},
+	{SENSOR, OV7660_COM8, 0x00},
+	{SENSOR, OV7660_COM10, 0x40},
+	{SENSOR, OV7660_HSTART, 0x0c},
+	{SENSOR, OV7660_HSTOP, 0x61},
+	{SENSOR, OV7660_HREF, 0xa4},
+	{SENSOR, OV7660_PSHFT, 0x0b},
+	{SENSOR, OV7660_VSTART, 0x01},
+	{SENSOR, OV7660_VSTOP, 0x7a},
+	{SENSOR, OV7660_VSTOP, 0x00},
+	{SENSOR, OV7660_COM7, 0x05},
+	{SENSOR, OV7660_COM6, 0x42},
+	{SENSOR, OV7660_BBIAS, 0x94},
+	{SENSOR, OV7660_GbBIAS, 0x94},
+	{SENSOR, OV7660_RSVD29, 0x94},
+	{SENSOR, OV7660_RBIAS, 0x94},
+	{SENSOR, OV7660_COM1, 0x00},
+	{SENSOR, OV7660_AECH, 0x00},
+	{SENSOR, OV7660_AECHH, 0x00},
+	{SENSOR, OV7660_ADC, 0x05},
+	{SENSOR, OV7660_COM13, 0x00},
+	{SENSOR, OV7660_RSVDA1, 0x23},
+	{SENSOR, OV7660_TSLB, 0x0d},
+	{SENSOR, OV7660_HV, 0x80},
+	{SENSOR, OV7660_LCC1, 0x00},
+	{SENSOR, OV7660_LCC2, 0x00},
+	{SENSOR, OV7660_LCC3, 0x10},
+	{SENSOR, OV7660_LCC4, 0x40},
+	{SENSOR, OV7660_LCC5, 0x01},
+	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06},
+	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
+	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
+	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
+	{BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81},
+	{BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82},
+	{BRIDGE, M5602_XB_SIG_INI, 0x01},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0x08},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0x01},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0xec},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
+	{BRIDGE, M5602_XB_SIG_INI, 0x00},
+	{BRIDGE, M5602_XB_SIG_INI, 0x02},
+	{BRIDGE, M5602_XB_HSYNC_PARA, 0x00},
+	{BRIDGE, M5602_XB_HSYNC_PARA, 0x27},
+	{BRIDGE, M5602_XB_HSYNC_PARA, 0x02},
+	{BRIDGE, M5602_XB_HSYNC_PARA, 0xae},
+	{BRIDGE, M5602_XB_SIG_INI, 0x00},
+	{SENSOR, OV7660_BLUE_GAIN, 0x80},
+	{SENSOR, OV7660_RED_GAIN, 0x80},
+	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x02},
+	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
+	{SENSOR, OV7660_AECH, 0x20},
+	{SENSOR, OV7660_COM1, 0x00},
+	{SENSOR, OV7660_GAIN, 0x07},
+	{SENSOR, OV7660_OFON, 0x0c},
+	{SENSOR, OV7660_COM2, 0x11},
+	{SENSOR, OV7660_COM7, 0x05},
+	{BRIDGE, M5602_XB_GPIO_DIR, 0x01},
+	{BRIDGE, M5602_XB_GPIO_DAT, 0x04},
+	{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
+	{BRIDGE, M5602_XB_GPIO_DIR_H, 0x06},
+	{BRIDGE, M5602_XB_GPIO_DAT_H, 0x00},
+	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x08},
+	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
+	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
+	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
+	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
+	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
+	{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
+	{BRIDGE, M5602_XB_GPIO_DAT, 0x00},
+	{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
+	{BRIDGE, M5602_XB_GPIO_EN_L, 0x00},
+	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06},
+	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
+	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
+	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
+	{BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81},
+	{BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82},
+	{BRIDGE, M5602_XB_SIG_INI, 0x01},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0x08},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0x01},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0xec},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
+	{BRIDGE, M5602_XB_SIG_INI, 0x00},
+	{BRIDGE, M5602_XB_SIG_INI, 0x02},
+	{BRIDGE, M5602_XB_HSYNC_PARA, 0x00},
+	{BRIDGE, M5602_XB_HSYNC_PARA, 0x27},
+	{BRIDGE, M5602_XB_HSYNC_PARA, 0x02},
+	{BRIDGE, M5602_XB_HSYNC_PARA, 0xae},
+	{BRIDGE, M5602_XB_SIG_INI, 0x00},
+	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
+	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
+	{SENSOR, OV7660_AECH, 0x5f},
+	{SENSOR, OV7660_COM1, 0x03},
+	{SENSOR, OV7660_GAIN, 0x02},
+	{SENSOR, OV7660_OFON, 0x0c},
+	{SENSOR, OV7660_COM2, 0x11},
+	{SENSOR, OV7660_COM7, 0x05},
+	{BRIDGE, M5602_XB_GPIO_DIR, 0x01},
+	{BRIDGE, M5602_XB_GPIO_DAT, 0x04},
+	{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
+	{BRIDGE, M5602_XB_GPIO_DIR_H, 0x06},
+	{BRIDGE, M5602_XB_GPIO_DAT_H, 0x00},
+	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x08},
+	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
+	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
+	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
+	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
+	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
+	{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
+	{BRIDGE, M5602_XB_GPIO_DAT, 0x00},
+	{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
+	{BRIDGE, M5602_XB_GPIO_EN_L, 0x00},
+	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06},
+	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
+	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
+	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
+	{BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81},
+	{BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82},
+	{BRIDGE, M5602_XB_SIG_INI, 0x01},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0x08},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0x01},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0xec},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
+	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
+	{BRIDGE, M5602_XB_SIG_INI, 0x00},
+	{BRIDGE, M5602_XB_SIG_INI, 0x02},
+	{BRIDGE, M5602_XB_HSYNC_PARA, 0x00},
+	{BRIDGE, M5602_XB_HSYNC_PARA, 0x27},
+	{BRIDGE, M5602_XB_HSYNC_PARA, 0x02},
+	{BRIDGE, M5602_XB_HSYNC_PARA, 0xae},
+	{BRIDGE, M5602_XB_SIG_INI, 0x00},
+	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
+	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
 };
 
 #endif
-- 
cgit v1.2.3


From a66887d2ba2f829cbbc23a64e19a0b757b79c39e Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Erik=20Andr=C3=A9n?= <erik.andren@gmail.com>
Date: Fri, 26 Jun 2009 04:35:37 -0300
Subject: V4L/DVB (12986): gspca - m5602-ov7660: Add hflip, vflip controls
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/m5602/m5602_ov7660.c | 109 ++++++++++++++++++++++++-
 1 file changed, 107 insertions(+), 2 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/m5602/m5602_ov7660.c b/drivers/media/video/gspca/m5602/m5602_ov7660.c
index f7c050f2552..9b5e1053279 100644
--- a/drivers/media/video/gspca/m5602/m5602_ov7660.c
+++ b/drivers/media/video/gspca/m5602/m5602_ov7660.c
@@ -32,6 +32,10 @@ static int ov7660_get_auto_gain(struct gspca_dev *gspca_dev, __s32 *val);
 static int ov7660_set_auto_gain(struct gspca_dev *gspca_dev, __s32 val);
 static int ov7660_get_auto_exposure(struct gspca_dev *gspca_dev, __s32 *val);
 static int ov7660_set_auto_exposure(struct gspca_dev *gspca_dev, __s32 val);
+static int ov7660_get_hflip(struct gspca_dev *gspca_dev, __s32 *val);
+static int ov7660_set_hflip(struct gspca_dev *gspca_dev, __s32 val);
+static int ov7660_get_vflip(struct gspca_dev *gspca_dev, __s32 *val);
+static int ov7660_set_vflip(struct gspca_dev *gspca_dev, __s32 val);
 
 const static struct ctrl ov7660_ctrls[] = {
 #define GAIN_IDX 1
@@ -120,7 +124,36 @@ const static struct ctrl ov7660_ctrls[] = {
 		},
 		.set = ov7660_set_auto_exposure,
 		.get = ov7660_get_auto_exposure
-	}
+	},
+#define HFLIP_IDX 7
+	{
+		{
+			.id 		= V4L2_CID_HFLIP,
+			.type 		= V4L2_CTRL_TYPE_BOOLEAN,
+			.name 		= "horizontal flip",
+			.minimum 	= 0,
+			.maximum 	= 1,
+			.step 		= 1,
+			.default_value 	= 0
+		},
+		.set = ov7660_set_hflip,
+		.get = ov7660_get_hflip
+	},
+#define VFLIP_IDX 8
+	{
+		{
+			.id 		= V4L2_CID_VFLIP,
+			.type 		= V4L2_CTRL_TYPE_BOOLEAN,
+			.name 		= "vertical flip",
+			.minimum 	= 0,
+			.maximum 	= 1,
+			.step 		= 1,
+			.default_value 	= 0
+		},
+		.set = ov7660_set_vflip,
+		.get = ov7660_get_vflip
+	},
+
 };
 
 static struct v4l2_pix_format ov7660_modes[] = {
@@ -221,7 +254,7 @@ int ov7660_init(struct sd *sd)
 		} else {
 			data[0] = init2_ov7660[i][2];
 			err = m5602_write_sensor(sd,
-					init2_ov7660[i][1], data, 1);
+				init2_ov7660[i][1], data, 1);
 		}
 	}
 
@@ -254,6 +287,16 @@ int ov7660_init(struct sd *sd)
 
 	err = ov7660_set_red_gain(&sd->gspca_dev,
 		sensor_settings[RED_BALANCE_IDX]);
+	if (err < 0)
+		return err;
+
+	err = ov7660_set_hflip(&sd->gspca_dev,
+		sensor_settings[HFLIP_IDX]);
+	if (err < 0)
+		return err;
+
+	err = ov7660_set_vflip(&sd->gspca_dev,
+		sensor_settings[VFLIP_IDX]);
 
 	return err;
 }
@@ -441,6 +484,68 @@ static int ov7660_set_auto_exposure(struct gspca_dev *gspca_dev,
 	return m5602_write_sensor(sd, OV7660_COM8, &i2c_data, 1);
 }
 
+static int ov7660_get_hflip(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	*val = sensor_settings[HFLIP_IDX];
+	PDEBUG(D_V4L2, "Read horizontal flip %d", *val);
+	return 0;
+}
+
+static int ov7660_set_hflip(struct gspca_dev *gspca_dev, __s32 val)
+{
+	int err;
+	u8 i2c_data;
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	PDEBUG(D_V4L2, "Set horizontal flip to %d", val);
+
+	sensor_settings[HFLIP_IDX] = val;
+
+	i2c_data = ((val & 0x01) << 5) |
+		(sensor_settings[VFLIP_IDX] << 4);
+
+	err = m5602_write_sensor(sd, OV7660_MVFP, &i2c_data, 1);
+
+	return err;
+}
+
+static int ov7660_get_vflip(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	*val = sensor_settings[VFLIP_IDX];
+	PDEBUG(D_V4L2, "Read vertical flip %d", *val);
+
+	return 0;
+}
+
+static int ov7660_set_vflip(struct gspca_dev *gspca_dev, __s32 val)
+{
+	int err;
+	u8 i2c_data;
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 *sensor_settings = sd->sensor_priv;
+
+	PDEBUG(D_V4L2, "Set vertical flip to %d", val);
+	sensor_settings[VFLIP_IDX] = val;
+
+	i2c_data = ((val & 0x01) << 4) | (sensor_settings[VFLIP_IDX] << 5);
+	err = m5602_write_sensor(sd, OV7660_MVFP, &i2c_data, 1);
+	if (err < 0)
+		return err;
+
+	/* When vflip is toggled we need to readjust the bridge hsync/vsync */
+	if (gspca_dev->streaming)
+		err = ov7660_start(sd);
+
+	return err;
+}
+
 static void ov7660_dump_registers(struct sd *sd)
 {
 	int address;
-- 
cgit v1.2.3


From 2ec92c28d73a0d2206c961180b955876d4f62a94 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Erik=20Andr=C3=A9n?= <erik.andren@gmail.com>
Date: Fri, 26 Jun 2009 04:45:07 -0300
Subject: V4L/DVB (12987): gspca - m5602-ov7660: Set the hsync correctly
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/m5602/m5602_ov7660.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/m5602/m5602_ov7660.h b/drivers/media/video/gspca/m5602/m5602_ov7660.h
index 8fa850c95f3..2ce05039b03 100644
--- a/drivers/media/video/gspca/m5602/m5602_ov7660.h
+++ b/drivers/media/video/gspca/m5602/m5602_ov7660.h
@@ -435,7 +435,7 @@ static const unsigned char init2_ov7660[][4] = {
 	{BRIDGE, M5602_XB_HSYNC_PARA, 0x00},
 	{BRIDGE, M5602_XB_HSYNC_PARA, 0x27},
 	{BRIDGE, M5602_XB_HSYNC_PARA, 0x02},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0xae},
+	{BRIDGE, M5602_XB_HSYNC_PARA, 0xa7},
 	{BRIDGE, M5602_XB_SIG_INI, 0x00},
 	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
 	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
-- 
cgit v1.2.3


From eb3678fbe5d5be8315628885b7c93228c97a433d Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Erik=20Andr=C3=A9n?= <erik.andren@gmail.com>
Date: Fri, 26 Jun 2009 09:20:04 -0300
Subject: V4L/DVB (12988): gspca - m5602-ov7660: Remove old init
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/m5602/m5602_ov7660.c |  12 +--
 drivers/media/video/gspca/m5602/m5602_ov7660.h | 129 -------------------------
 2 files changed, 6 insertions(+), 135 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/m5602/m5602_ov7660.c b/drivers/media/video/gspca/m5602/m5602_ov7660.c
index 9b5e1053279..9648b90eec7 100644
--- a/drivers/media/video/gspca/m5602/m5602_ov7660.c
+++ b/drivers/media/video/gspca/m5602/m5602_ov7660.c
@@ -244,17 +244,17 @@ int ov7660_init(struct sd *sd)
 	s32 *sensor_settings = sd->sensor_priv;
 
 	/* Init the sensor */
-	for (i = 0; i < ARRAY_SIZE(init2_ov7660); i++) {
+	for (i = 0; i < ARRAY_SIZE(init_ov7660); i++) {
 		u8 data[2];
 
-		if (init2_ov7660[i][0] == BRIDGE) {
+		if (init_ov7660[i][0] == BRIDGE) {
 			err = m5602_write_bridge(sd,
-				init2_ov7660[i][1],
-				init2_ov7660[i][2]);
+				init_ov7660[i][1],
+				init_ov7660[i][2]);
 		} else {
-			data[0] = init2_ov7660[i][2];
+			data[0] = init_ov7660[i][2];
 			err = m5602_write_sensor(sd,
-				init2_ov7660[i][1], data, 1);
+				init_ov7660[i][1], data, 1);
 		}
 	}
 
diff --git a/drivers/media/video/gspca/m5602/m5602_ov7660.h b/drivers/media/video/gspca/m5602/m5602_ov7660.h
index 2ce05039b03..3360aaec257 100644
--- a/drivers/media/video/gspca/m5602/m5602_ov7660.h
+++ b/drivers/media/video/gspca/m5602/m5602_ov7660.h
@@ -142,135 +142,6 @@ static const unsigned char preinit_ov7660[][4] =
 
 static const unsigned char init_ov7660[][4] =
 {
-	{BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02},
-	{BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
-	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
-	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0d},
-	{BRIDGE, M5602_XB_SENSOR_CTRL, 0x00},
-	{BRIDGE, M5602_XB_GPIO_DIR, 0x03},
-	{BRIDGE, M5602_XB_GPIO_DIR, 0x03},
-	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
-	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
-
-	{SENSOR, OV7660_OFON, 0x0c},
-	{SENSOR, OV7660_COM2, 0x11},
-	{SENSOR, OV7660_COM7, 0x05},
-
-	{BRIDGE, M5602_XB_GPIO_DIR, 0x01},
-	{BRIDGE, M5602_XB_GPIO_DAT, 0x04},
-	{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
-	{BRIDGE, M5602_XB_GPIO_DIR_H, 0x06},
-	{BRIDGE, M5602_XB_GPIO_DAT_H, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x08},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
-	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
-	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
-	{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
-	{BRIDGE, M5602_XB_GPIO_DAT, 0x00},
-	{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
-	{BRIDGE, M5602_XB_GPIO_EN_L, 0x00},
-
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x02},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
-
-	{SENSOR, OV7660_AECH, OV7660_DEFAULT_EXPOSURE},
-	{SENSOR, OV7660_COM1, 0x00},
-
-	{BRIDGE, M5602_XB_GPIO_DIR, 0x01},
-	{BRIDGE, M5602_XB_GPIO_DAT, 0x04},
-	{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
-	{BRIDGE, M5602_XB_GPIO_DIR_H, 0x06},
-	{BRIDGE, M5602_XB_GPIO_DAT_H, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x08},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
-
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
-	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
-	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
-	{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
-	{BRIDGE, M5602_XB_GPIO_DAT, 0x00},
-	{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
-	{BRIDGE, M5602_XB_GPIO_EN_L, 0x00},
-
-	{SENSOR, OV7660_COM7, 0x80},
-	{SENSOR, OV7660_CLKRC, 0x80},
-	{SENSOR, OV7660_COM9, 0x4c},
-	{SENSOR, OV7660_OFON, 0x43},
-	{SENSOR, OV7660_COM12, 0x28},
-	{SENSOR, OV7660_COM8, 0x00},
-	{SENSOR, OV7660_COM10, 0x40},
-	{SENSOR, OV7660_HSTART, 0x0c},
-	{SENSOR, OV7660_HSTOP, 0x61},
-	{SENSOR, OV7660_HREF, 0xa4},
-	{SENSOR, OV7660_PSHFT, 0x0b},
-	{SENSOR, OV7660_VSTART, 0x01},
-	{SENSOR, OV7660_VSTOP, 0x7a},
-	{SENSOR, OV7660_VREF, 0x00},
-	{SENSOR, OV7660_COM7, 0x05},
-	{SENSOR, OV7660_COM6, 0x4b},
-	{SENSOR, OV7660_BBIAS, 0x98},
-	{SENSOR, OV7660_GbBIAS, 0x98},
-	{SENSOR, OV7660_RSVD29, 0x98},
-	{SENSOR, OV7660_RBIAS, 0x98},
-	{SENSOR, OV7660_COM1, 0x00},
-	{SENSOR, OV7660_AECHH, 0x00},
-	{SENSOR, OV7660_ADC, 0x04},
-	{SENSOR, OV7660_COM13, 0x00},
-	{SENSOR, OV7660_RSVDA1, 0x23},
-	{SENSOR, OV7660_TSLB, 0x0d},
-	{SENSOR, OV7660_HV, 0x80},
-	{SENSOR, OV7660_LCC1, 0x00},
-	{SENSOR, OV7660_LCC2, 0x00},
-	{SENSOR, OV7660_LCC3, 0x10},
-	{SENSOR, OV7660_LCC4, 0x40},
-	{SENSOR, OV7660_LCC5, 0x01},
-
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
-	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
-	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
-	{BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81},
-	{BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82},
-	{BRIDGE, M5602_XB_SIG_INI, 0x01},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x08},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x01},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0xe0}, /* 480 */
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x02},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x27}, /* 39 */
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x02},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0xa7}, /* 679 */
-	{BRIDGE, M5602_XB_SIG_INI, 0x00},
-
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
-
-	{SENSOR, OV7660_COM1, 0x00},
-	{SENSOR, OV7660_OFON, 0x0c},
-	{SENSOR, OV7660_COM2, 0x11}, /* Soft sleep, 2x Drive */
-	{SENSOR, OV7660_COM7, 0x05}, /* Raw RGB */
-
-	{BRIDGE, M5602_XB_GPIO_DIR, 0x01},
-	{BRIDGE, M5602_XB_GPIO_DAT, 0x04},
-	{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
-	{BRIDGE, M5602_XB_GPIO_DIR_H, 0x06},
-	{BRIDGE, M5602_XB_GPIO_DAT_H, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x08},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}
-};
-
-static const unsigned char init2_ov7660[][4] = {
 	{BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02},
 	{BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0},
 	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
-- 
cgit v1.2.3


From b5b93844ace95712f88933d5f622cd5d833530c5 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Erik=20Andr=C3=A9n?= <erik.andren@gmail.com>
Date: Fri, 26 Jun 2009 09:21:46 -0300
Subject: V4L/DVB (12989): gspca - m5602-ov7660: Don't set gain during init
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

We manually set the gain later, no need to do it during init

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/m5602/m5602_ov7660.h | 2 --
 1 file changed, 2 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/m5602/m5602_ov7660.h b/drivers/media/video/gspca/m5602/m5602_ov7660.h
index 3360aaec257..5434be60e02 100644
--- a/drivers/media/video/gspca/m5602/m5602_ov7660.h
+++ b/drivers/media/video/gspca/m5602/m5602_ov7660.h
@@ -222,7 +222,6 @@ static const unsigned char init_ov7660[][4] =
 	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
 	{SENSOR, OV7660_AECH, 0x20},
 	{SENSOR, OV7660_COM1, 0x00},
-	{SENSOR, OV7660_GAIN, 0x07},
 	{SENSOR, OV7660_OFON, 0x0c},
 	{SENSOR, OV7660_COM2, 0x11},
 	{SENSOR, OV7660_COM7, 0x05},
@@ -267,7 +266,6 @@ static const unsigned char init_ov7660[][4] =
 	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
 	{SENSOR, OV7660_AECH, 0x5f},
 	{SENSOR, OV7660_COM1, 0x03},
-	{SENSOR, OV7660_GAIN, 0x02},
 	{SENSOR, OV7660_OFON, 0x0c},
 	{SENSOR, OV7660_COM2, 0x11},
 	{SENSOR, OV7660_COM7, 0x05},
-- 
cgit v1.2.3


From 87fad38e6eede2305e57eeb7d75a67a01b77e063 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Erik=20Andr=C3=A9n?= <erik.andren@gmail.com>
Date: Fri, 26 Jun 2009 09:22:59 -0300
Subject: V4L/DVB (12990): gspca - m5602-ov7660: Don't set blue and red gain
 during init
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Don't set blue and red gain during init as we manuall set it later

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/m5602/m5602_ov7660.h | 4 ----
 1 file changed, 4 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/m5602/m5602_ov7660.h b/drivers/media/video/gspca/m5602/m5602_ov7660.h
index 5434be60e02..ee7c748f1e6 100644
--- a/drivers/media/video/gspca/m5602/m5602_ov7660.h
+++ b/drivers/media/video/gspca/m5602/m5602_ov7660.h
@@ -161,8 +161,6 @@ static const unsigned char init_ov7660[][4] =
 	{BRIDGE, M5602_XB_GPIO_EN_L, 0x00},
 	{SENSOR, OV7660_COM7, 0x80},
 	{SENSOR, OV7660_CLKRC, 0x80},
-	{SENSOR, OV7660_BLUE_GAIN, 0x80},
-	{SENSOR, OV7660_RED_GAIN, 0x80},
 	{SENSOR, OV7660_COM9, 0x4c},
 	{SENSOR, OV7660_OFON, 0x43},
 	{SENSOR, OV7660_COM12, 0x28},
@@ -216,8 +214,6 @@ static const unsigned char init_ov7660[][4] =
 	{BRIDGE, M5602_XB_HSYNC_PARA, 0x02},
 	{BRIDGE, M5602_XB_HSYNC_PARA, 0xae},
 	{BRIDGE, M5602_XB_SIG_INI, 0x00},
-	{SENSOR, OV7660_BLUE_GAIN, 0x80},
-	{SENSOR, OV7660_RED_GAIN, 0x80},
 	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x02},
 	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
 	{SENSOR, OV7660_AECH, 0x20},
-- 
cgit v1.2.3


From e1e7e677a4818500b220cebc45a1b47055c9443a Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Erik=20Andr=C3=A9n?= <erik.andren@gmail.com>
Date: Fri, 26 Jun 2009 09:30:42 -0300
Subject: V4L/DVB (12991): gspca - m5602-ov7660: Remove redundant init writes
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/m5602/m5602_ov7660.h | 50 ++------------------------
 1 file changed, 2 insertions(+), 48 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/m5602/m5602_ov7660.h b/drivers/media/video/gspca/m5602/m5602_ov7660.h
index ee7c748f1e6..f5588ebe667 100644
--- a/drivers/media/video/gspca/m5602/m5602_ov7660.h
+++ b/drivers/media/video/gspca/m5602/m5602_ov7660.h
@@ -192,30 +192,7 @@ static const unsigned char init_ov7660[][4] =
 	{SENSOR, OV7660_LCC3, 0x10},
 	{SENSOR, OV7660_LCC4, 0x40},
 	{SENSOR, OV7660_LCC5, 0x01},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
-	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
-	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
-	{BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81},
-	{BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82},
-	{BRIDGE, M5602_XB_SIG_INI, 0x01},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x08},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x01},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0xec},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x02},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x27},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x02},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0xae},
-	{BRIDGE, M5602_XB_SIG_INI, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x02},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
+
 	{SENSOR, OV7660_AECH, 0x20},
 	{SENSOR, OV7660_COM1, 0x00},
 	{SENSOR, OV7660_OFON, 0x0c},
@@ -236,30 +213,6 @@ static const unsigned char init_ov7660[][4] =
 	{BRIDGE, M5602_XB_GPIO_DAT, 0x00},
 	{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
 	{BRIDGE, M5602_XB_GPIO_EN_L, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
-	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
-	{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
-	{BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81},
-	{BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82},
-	{BRIDGE, M5602_XB_SIG_INI, 0x01},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x08},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x01},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0xec},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
-	{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x00},
-	{BRIDGE, M5602_XB_SIG_INI, 0x02},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x00},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x27},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0x02},
-	{BRIDGE, M5602_XB_HSYNC_PARA, 0xae},
-	{BRIDGE, M5602_XB_SIG_INI, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
-	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
 	{SENSOR, OV7660_AECH, 0x5f},
 	{SENSOR, OV7660_COM1, 0x03},
 	{SENSOR, OV7660_OFON, 0x0c},
@@ -280,6 +233,7 @@ static const unsigned char init_ov7660[][4] =
 	{BRIDGE, M5602_XB_GPIO_DAT, 0x00},
 	{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
 	{BRIDGE, M5602_XB_GPIO_EN_L, 0x00},
+
 	{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06},
 	{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
 	{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
-- 
cgit v1.2.3


From bb3baf89d197f392c011c64935b79ed67a6542db Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Erik=20Andr=C3=A9n?= <erik.andren@gmail.com>
Date: Mon, 14 Sep 2009 13:14:41 -0300
Subject: V4L/DVB (12992): gspca - m5602-ov7660: Disable red and blue gain for
 now
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Red and blue gain isn't handled in conformance with the v4l2 specification. Disable them for now.

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/m5602/m5602_ov7660.c | 92 --------------------------
 1 file changed, 92 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/m5602/m5602_ov7660.c b/drivers/media/video/gspca/m5602/m5602_ov7660.c
index 9648b90eec7..2a28b74cb3f 100644
--- a/drivers/media/video/gspca/m5602/m5602_ov7660.c
+++ b/drivers/media/video/gspca/m5602/m5602_ov7660.c
@@ -20,10 +20,6 @@
 
 static int ov7660_get_gain(struct gspca_dev *gspca_dev, __s32 *val);
 static int ov7660_set_gain(struct gspca_dev *gspca_dev, __s32 val);
-static int ov7660_get_blue_gain(struct gspca_dev *gspca_dev, __s32 *val);
-static int ov7660_set_blue_gain(struct gspca_dev *gspca_dev, __s32 val);
-static int ov7660_get_red_gain(struct gspca_dev *gspca_dev, __s32 *val);
-static int ov7660_set_red_gain(struct gspca_dev *gspca_dev, __s32 val);
 static int ov7660_get_auto_white_balance(struct gspca_dev *gspca_dev,
 					 __s32 *val);
 static int ov7660_set_auto_white_balance(struct gspca_dev *gspca_dev,
@@ -54,35 +50,7 @@ const static struct ctrl ov7660_ctrls[] = {
 		.get = ov7660_get_gain
 	},
 #define BLUE_BALANCE_IDX 2
-	{
-		{
-			.id		= V4L2_CID_BLUE_BALANCE,
-			.type		= V4L2_CTRL_TYPE_INTEGER,
-			.name		= "blue balance",
-			.minimum	= 0x00,
-			.maximum	= 0x7f,
-			.step		= 0x1,
-			.default_value	= OV7660_DEFAULT_BLUE_GAIN,
-			.flags		= V4L2_CTRL_FLAG_SLIDER
-		},
-		.set = ov7660_set_blue_gain,
-		.get = ov7660_get_blue_gain
-	},
 #define RED_BALANCE_IDX 3
-	{
-		{
-			.id		= V4L2_CID_RED_BALANCE,
-			.type		= V4L2_CTRL_TYPE_INTEGER,
-			.name		= "red balance",
-			.minimum	= 0x00,
-			.maximum	= 0x7f,
-			.step		= 0x1,
-			.default_value	= OV7660_DEFAULT_RED_GAIN,
-			.flags		= V4L2_CTRL_FLAG_SLIDER
-		},
-		.set = ov7660_set_red_gain,
-		.get = ov7660_get_red_gain
-	},
 #define AUTO_WHITE_BALANCE_IDX 4
 	{
 		{
@@ -279,17 +247,6 @@ int ov7660_init(struct sd *sd)
 		sensor_settings[AUTO_EXPOSURE_IDX]);
 	if (err < 0)
 		return err;
-
-	err = ov7660_set_blue_gain(&sd->gspca_dev,
-		sensor_settings[BLUE_BALANCE_IDX]);
-	if (err < 0)
-		return err;
-
-	err = ov7660_set_red_gain(&sd->gspca_dev,
-		sensor_settings[RED_BALANCE_IDX]);
-	if (err < 0)
-		return err;
-
 	err = ov7660_set_hflip(&sd->gspca_dev,
 		sensor_settings[HFLIP_IDX]);
 	if (err < 0)
@@ -344,55 +301,6 @@ static int ov7660_set_gain(struct gspca_dev *gspca_dev, __s32 val)
 	return err;
 }
 
-static int ov7660_get_blue_gain(struct gspca_dev *gspca_dev, __s32 *val)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-	s32 *sensor_settings = sd->sensor_priv;
-
-	*val = sensor_settings[BLUE_BALANCE_IDX];
-	PDEBUG(D_V4L2, "Read blue balance %d", *val);
-	return 0;
-}
-
-static int ov7660_set_blue_gain(struct gspca_dev *gspca_dev, __s32 val)
-{
-	int err;
-	u8 i2c_data;
-	struct sd *sd = (struct sd *) gspca_dev;
-	s32 *sensor_settings = sd->sensor_priv;
-
-	PDEBUG(D_V4L2, "Setting blue balance to %d", val);
-
-	sensor_settings[BLUE_BALANCE_IDX] = val;
-
-	err = m5602_write_sensor(sd, OV7660_BLUE_GAIN, &i2c_data, 1);
-	return err;
-}
-
-static int ov7660_get_red_gain(struct gspca_dev *gspca_dev, __s32 *val)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-	s32 *sensor_settings = sd->sensor_priv;
-
-	*val = sensor_settings[RED_BALANCE_IDX];
-	PDEBUG(D_V4L2, "Read red balance %d", *val);
-	return 0;
-}
-
-static int ov7660_set_red_gain(struct gspca_dev *gspca_dev, __s32 val)
-{
-	int err;
-	u8 i2c_data;
-	struct sd *sd = (struct sd *) gspca_dev;
-	s32 *sensor_settings = sd->sensor_priv;
-
-	PDEBUG(D_V4L2, "Setting red balance to %d", val);
-
-	sensor_settings[RED_BALANCE_IDX] = val;
-
-	err = m5602_write_sensor(sd, OV7660_RED_GAIN, &i2c_data, 1);
-	return err;
-}
 
 static int ov7660_get_auto_white_balance(struct gspca_dev *gspca_dev,
 					 __s32 *val)
-- 
cgit v1.2.3


From 63a8e71c4453a38c3468f84f0f452e2643abdad3 Mon Sep 17 00:00:00 2001
From: Chaithrika U S <chaithrika@ti.com>
Date: Tue, 9 Jun 2009 05:54:02 -0300
Subject: V4L/DVB (12175): davinci/vpif: Add Video Port Interface (VPIF) driver

This code be used by the display and capture drivers.

Signed-off-by: Manjunath Hadli <mrh@ti.com>
Signed-off-by: Brijesh Jadav <brijesh.j@ti.com>
Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/davinci/vpif.c | 234 ++++++++++++++
 drivers/media/video/davinci/vpif.h | 632 +++++++++++++++++++++++++++++++++++++
 2 files changed, 866 insertions(+)
 create mode 100644 drivers/media/video/davinci/vpif.c
 create mode 100644 drivers/media/video/davinci/vpif.h

(limited to 'drivers/media')

diff --git a/drivers/media/video/davinci/vpif.c b/drivers/media/video/davinci/vpif.c
new file mode 100644
index 00000000000..aa771268a5a
--- /dev/null
+++ b/drivers/media/video/davinci/vpif.c
@@ -0,0 +1,234 @@
+/*
+ * vpif - DM646x Video Port Interface driver
+ * VPIF is a receiver and transmitter for video data. It has two channels(0, 1)
+ * that receiveing video byte stream and two channels(2, 3) for video output.
+ * The hardware supports SDTV, HDTV formats, raw data capture.
+ * Currently, the driver supports NTSC and PAL standards.
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed .as is. WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+
+#include "vpif.h"
+
+MODULE_DESCRIPTION("TI DaVinci Video Port Interface driver");
+MODULE_LICENSE("GPL");
+
+#define VPIF_CH0_MAX_MODES	(22)
+#define VPIF_CH1_MAX_MODES	(02)
+#define VPIF_CH2_MAX_MODES	(15)
+#define VPIF_CH3_MAX_MODES	(02)
+
+static inline void vpif_wr_bit(u32 reg, u32 bit, u32 val)
+{
+	if (val)
+		vpif_set_bit(reg, bit);
+	else
+		vpif_clr_bit(reg, bit);
+}
+
+/* This structure is used to keep track of VPIF size register's offsets */
+struct vpif_registers {
+	u32 h_cfg, v_cfg_00, v_cfg_01, v_cfg_02, v_cfg, ch_ctrl;
+	u32 line_offset, vanc0_strt, vanc0_size, vanc1_strt;
+	u32 vanc1_size, width_mask, len_mask;
+	u8 max_modes;
+};
+
+static const struct vpif_registers vpifregs[VPIF_NUM_CHANNELS] = {
+	/* Channel0 */
+	{
+		VPIF_CH0_H_CFG, VPIF_CH0_V_CFG_00, VPIF_CH0_V_CFG_01,
+		VPIF_CH0_V_CFG_02, VPIF_CH0_V_CFG_03, VPIF_CH0_CTRL,
+		VPIF_CH0_IMG_ADD_OFST, 0, 0, 0, 0, 0x1FFF, 0xFFF,
+		VPIF_CH0_MAX_MODES,
+	},
+	/* Channel1 */
+	{
+		VPIF_CH1_H_CFG, VPIF_CH1_V_CFG_00, VPIF_CH1_V_CFG_01,
+		VPIF_CH1_V_CFG_02, VPIF_CH1_V_CFG_03, VPIF_CH1_CTRL,
+		VPIF_CH1_IMG_ADD_OFST, 0, 0, 0, 0, 0x1FFF, 0xFFF,
+		VPIF_CH1_MAX_MODES,
+	},
+	/* Channel2 */
+	{
+		VPIF_CH2_H_CFG, VPIF_CH2_V_CFG_00, VPIF_CH2_V_CFG_01,
+		VPIF_CH2_V_CFG_02, VPIF_CH2_V_CFG_03, VPIF_CH2_CTRL,
+		VPIF_CH2_IMG_ADD_OFST, VPIF_CH2_VANC0_STRT, VPIF_CH2_VANC0_SIZE,
+		VPIF_CH2_VANC1_STRT, VPIF_CH2_VANC1_SIZE, 0x7FF, 0x7FF,
+		VPIF_CH2_MAX_MODES
+	},
+	/* Channel3 */
+	{
+		VPIF_CH3_H_CFG, VPIF_CH3_V_CFG_00, VPIF_CH3_V_CFG_01,
+		VPIF_CH3_V_CFG_02, VPIF_CH3_V_CFG_03, VPIF_CH3_CTRL,
+		VPIF_CH3_IMG_ADD_OFST, VPIF_CH3_VANC0_STRT, VPIF_CH3_VANC0_SIZE,
+		VPIF_CH3_VANC1_STRT, VPIF_CH3_VANC1_SIZE, 0x7FF, 0x7FF,
+		VPIF_CH3_MAX_MODES
+	},
+};
+
+/* vpif_set_mode_info:
+ * This function is used to set horizontal and vertical config parameters
+ * As per the standard in the channel, configure the values of L1, L3,
+ * L5, L7  L9, L11 in VPIF Register , also write width and height
+ */
+static void vpif_set_mode_info(const struct vpif_channel_config_params *config,
+				u8 channel_id, u8 config_channel_id)
+{
+	u32 value;
+
+	value = (config->eav2sav & vpifregs[config_channel_id].width_mask);
+	value <<= VPIF_CH_LEN_SHIFT;
+	value |= (config->sav2eav & vpifregs[config_channel_id].width_mask);
+	regw(value, vpifregs[channel_id].h_cfg);
+
+	value = (config->l1 & vpifregs[config_channel_id].len_mask);
+	value <<= VPIF_CH_LEN_SHIFT;
+	value |= (config->l3 & vpifregs[config_channel_id].len_mask);
+	regw(value, vpifregs[channel_id].v_cfg_00);
+
+	value = (config->l5 & vpifregs[config_channel_id].len_mask);
+	value <<= VPIF_CH_LEN_SHIFT;
+	value |= (config->l7 & vpifregs[config_channel_id].len_mask);
+	regw(value, vpifregs[channel_id].v_cfg_01);
+
+	value = (config->l9 & vpifregs[config_channel_id].len_mask);
+	value <<= VPIF_CH_LEN_SHIFT;
+	value |= (config->l11 & vpifregs[config_channel_id].len_mask);
+	regw(value, vpifregs[channel_id].v_cfg_02);
+
+	value = (config->vsize & vpifregs[config_channel_id].len_mask);
+	regw(value, vpifregs[channel_id].v_cfg);
+}
+
+/* config_vpif_params
+ * Function to set the parameters of a channel
+ * Mainly modifies the channel ciontrol register
+ * It sets frame format, yc mux mode
+ */
+static void config_vpif_params(struct vpif_params *vpifparams,
+				u8 channel_id, u8 found)
+{
+	const struct vpif_channel_config_params *config = &vpifparams->std_info;
+	u32 value, ch_nip, reg;
+	u8 start, end;
+	int i;
+
+	start = channel_id;
+	end = channel_id + found;
+
+	for (i = start; i < end; i++) {
+		reg = vpifregs[i].ch_ctrl;
+		if (channel_id < 2)
+			ch_nip = VPIF_CAPTURE_CH_NIP;
+		else
+			ch_nip = VPIF_DISPLAY_CH_NIP;
+
+		vpif_wr_bit(reg, ch_nip, config->frm_fmt);
+		vpif_wr_bit(reg, VPIF_CH_YC_MUX_BIT, config->ycmux_mode);
+		vpif_wr_bit(reg, VPIF_CH_INPUT_FIELD_FRAME_BIT,
+					vpifparams->video_params.storage_mode);
+
+		/* Set raster scanning SDR Format */
+		vpif_clr_bit(reg, VPIF_CH_SDR_FMT_BIT);
+		vpif_wr_bit(reg, VPIF_CH_DATA_MODE_BIT, config->capture_format);
+
+		if (channel_id > 1)	/* Set the Pixel enable bit */
+			vpif_set_bit(reg, VPIF_DISPLAY_PIX_EN_BIT);
+		else if (config->capture_format) {
+			/* Set the polarity of various pins */
+			vpif_wr_bit(reg, VPIF_CH_FID_POLARITY_BIT,
+					vpifparams->params.raw_params.fid_pol);
+			vpif_wr_bit(reg, VPIF_CH_V_VALID_POLARITY_BIT,
+					vpifparams->params.raw_params.vd_pol);
+			vpif_wr_bit(reg, VPIF_CH_H_VALID_POLARITY_BIT,
+					vpifparams->params.raw_params.hd_pol);
+
+			value = regr(reg);
+			/* Set data width */
+			value &= ((~(unsigned int)(0x3)) <<
+					VPIF_CH_DATA_WIDTH_BIT);
+			value |= ((vpifparams->params.raw_params.data_sz) <<
+						     VPIF_CH_DATA_WIDTH_BIT);
+			regw(value, reg);
+		}
+
+		/* Write the pitch in the driver */
+		regw((vpifparams->video_params.hpitch),
+						vpifregs[i].line_offset);
+	}
+}
+
+/* vpif_set_video_params
+ * This function is used to set video parameters in VPIF register
+ */
+int vpif_set_video_params(struct vpif_params *vpifparams, u8 channel_id)
+{
+	const struct vpif_channel_config_params *config = &vpifparams->std_info;
+	int found = 1;
+
+	vpif_set_mode_info(config, channel_id, channel_id);
+	if (!config->ycmux_mode) {
+		/* YC are on separate channels (HDTV formats) */
+		vpif_set_mode_info(config, channel_id + 1, channel_id);
+		found = 2;
+	}
+
+	config_vpif_params(vpifparams, channel_id, found);
+
+	regw(0x80, VPIF_REQ_SIZE);
+	regw(0x01, VPIF_EMULATION_CTRL);
+
+	return found;
+}
+EXPORT_SYMBOL(vpif_set_video_params);
+
+void vpif_set_vbi_display_params(struct vpif_vbi_params *vbiparams,
+				u8 channel_id)
+{
+	u32 value;
+
+	value = 0x3F8 & (vbiparams->hstart0);
+	value |= 0x3FFFFFF & ((vbiparams->vstart0) << 16);
+	regw(value, vpifregs[channel_id].vanc0_strt);
+
+	value = 0x3F8 & (vbiparams->hstart1);
+	value |= 0x3FFFFFF & ((vbiparams->vstart1) << 16);
+	regw(value, vpifregs[channel_id].vanc1_strt);
+
+	value = 0x3F8 & (vbiparams->hsize0);
+	value |= 0x3FFFFFF & ((vbiparams->vsize0) << 16);
+	regw(value, vpifregs[channel_id].vanc0_size);
+
+	value = 0x3F8 & (vbiparams->hsize1);
+	value |= 0x3FFFFFF & ((vbiparams->vsize1) << 16);
+	regw(value, vpifregs[channel_id].vanc1_size);
+
+}
+EXPORT_SYMBOL(vpif_set_vbi_display_params);
+
+int vpif_channel_getfid(u8 channel_id)
+{
+	return (regr(vpifregs[channel_id].ch_ctrl) & VPIF_CH_FID_MASK)
+					>> VPIF_CH_FID_SHIFT;
+}
+EXPORT_SYMBOL(vpif_channel_getfid);
+
+void vpif_base_addr_init(void __iomem *base)
+{
+	vpif_base = base;
+}
+EXPORT_SYMBOL(vpif_base_addr_init);
diff --git a/drivers/media/video/davinci/vpif.h b/drivers/media/video/davinci/vpif.h
new file mode 100644
index 00000000000..fca26dcb54d
--- /dev/null
+++ b/drivers/media/video/davinci/vpif.h
@@ -0,0 +1,632 @@
+/*
+ * VPIF header file
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed .as is. WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef VPIF_H
+#define VPIF_H
+
+#include <linux/io.h>
+#include <linux/videodev2.h>
+#include <mach/hardware.h>
+
+/* Maximum channel allowed */
+#define VPIF_NUM_CHANNELS		(4)
+#define VPIF_CAPTURE_NUM_CHANNELS	(2)
+#define VPIF_DISPLAY_NUM_CHANNELS	(2)
+
+/* Macros to read/write registers */
+static void __iomem *vpif_base;
+#define regr(reg)               readl((reg) + vpif_base)
+#define regw(value, reg)        writel(value, (reg + vpif_base))
+
+/* Register Addresss Offsets */
+#define VPIF_PID			(0x0000)
+#define VPIF_CH0_CTRL			(0x0004)
+#define VPIF_CH1_CTRL			(0x0008)
+#define VPIF_CH2_CTRL			(0x000C)
+#define VPIF_CH3_CTRL			(0x0010)
+
+#define VPIF_INTEN			(0x0020)
+#define VPIF_INTEN_SET			(0x0024)
+#define VPIF_INTEN_CLR			(0x0028)
+#define VPIF_STATUS			(0x002C)
+#define VPIF_STATUS_CLR			(0x0030)
+#define VPIF_EMULATION_CTRL		(0x0034)
+#define VPIF_REQ_SIZE			(0x0038)
+
+#define VPIF_CH0_TOP_STRT_ADD_LUMA	(0x0040)
+#define VPIF_CH0_BTM_STRT_ADD_LUMA	(0x0044)
+#define VPIF_CH0_TOP_STRT_ADD_CHROMA	(0x0048)
+#define VPIF_CH0_BTM_STRT_ADD_CHROMA	(0x004c)
+#define VPIF_CH0_TOP_STRT_ADD_HANC	(0x0050)
+#define VPIF_CH0_BTM_STRT_ADD_HANC	(0x0054)
+#define VPIF_CH0_TOP_STRT_ADD_VANC	(0x0058)
+#define VPIF_CH0_BTM_STRT_ADD_VANC	(0x005c)
+#define VPIF_CH0_SP_CFG			(0x0060)
+#define VPIF_CH0_IMG_ADD_OFST		(0x0064)
+#define VPIF_CH0_HANC_ADD_OFST		(0x0068)
+#define VPIF_CH0_H_CFG			(0x006c)
+#define VPIF_CH0_V_CFG_00		(0x0070)
+#define VPIF_CH0_V_CFG_01		(0x0074)
+#define VPIF_CH0_V_CFG_02		(0x0078)
+#define VPIF_CH0_V_CFG_03		(0x007c)
+
+#define VPIF_CH1_TOP_STRT_ADD_LUMA	(0x0080)
+#define VPIF_CH1_BTM_STRT_ADD_LUMA	(0x0084)
+#define VPIF_CH1_TOP_STRT_ADD_CHROMA	(0x0088)
+#define VPIF_CH1_BTM_STRT_ADD_CHROMA	(0x008c)
+#define VPIF_CH1_TOP_STRT_ADD_HANC	(0x0090)
+#define VPIF_CH1_BTM_STRT_ADD_HANC	(0x0094)
+#define VPIF_CH1_TOP_STRT_ADD_VANC	(0x0098)
+#define VPIF_CH1_BTM_STRT_ADD_VANC	(0x009c)
+#define VPIF_CH1_SP_CFG			(0x00a0)
+#define VPIF_CH1_IMG_ADD_OFST		(0x00a4)
+#define VPIF_CH1_HANC_ADD_OFST		(0x00a8)
+#define VPIF_CH1_H_CFG			(0x00ac)
+#define VPIF_CH1_V_CFG_00		(0x00b0)
+#define VPIF_CH1_V_CFG_01		(0x00b4)
+#define VPIF_CH1_V_CFG_02		(0x00b8)
+#define VPIF_CH1_V_CFG_03		(0x00bc)
+
+#define VPIF_CH2_TOP_STRT_ADD_LUMA	(0x00c0)
+#define VPIF_CH2_BTM_STRT_ADD_LUMA	(0x00c4)
+#define VPIF_CH2_TOP_STRT_ADD_CHROMA	(0x00c8)
+#define VPIF_CH2_BTM_STRT_ADD_CHROMA	(0x00cc)
+#define VPIF_CH2_TOP_STRT_ADD_HANC	(0x00d0)
+#define VPIF_CH2_BTM_STRT_ADD_HANC	(0x00d4)
+#define VPIF_CH2_TOP_STRT_ADD_VANC	(0x00d8)
+#define VPIF_CH2_BTM_STRT_ADD_VANC	(0x00dc)
+#define VPIF_CH2_SP_CFG			(0x00e0)
+#define VPIF_CH2_IMG_ADD_OFST		(0x00e4)
+#define VPIF_CH2_HANC_ADD_OFST		(0x00e8)
+#define VPIF_CH2_H_CFG			(0x00ec)
+#define VPIF_CH2_V_CFG_00		(0x00f0)
+#define VPIF_CH2_V_CFG_01		(0x00f4)
+#define VPIF_CH2_V_CFG_02		(0x00f8)
+#define VPIF_CH2_V_CFG_03		(0x00fc)
+#define VPIF_CH2_HANC0_STRT		(0x0100)
+#define VPIF_CH2_HANC0_SIZE		(0x0104)
+#define VPIF_CH2_HANC1_STRT		(0x0108)
+#define VPIF_CH2_HANC1_SIZE		(0x010c)
+#define VPIF_CH2_VANC0_STRT		(0x0110)
+#define VPIF_CH2_VANC0_SIZE		(0x0114)
+#define VPIF_CH2_VANC1_STRT		(0x0118)
+#define VPIF_CH2_VANC1_SIZE		(0x011c)
+
+#define VPIF_CH3_TOP_STRT_ADD_LUMA	(0x0140)
+#define VPIF_CH3_BTM_STRT_ADD_LUMA	(0x0144)
+#define VPIF_CH3_TOP_STRT_ADD_CHROMA	(0x0148)
+#define VPIF_CH3_BTM_STRT_ADD_CHROMA	(0x014c)
+#define VPIF_CH3_TOP_STRT_ADD_HANC	(0x0150)
+#define VPIF_CH3_BTM_STRT_ADD_HANC	(0x0154)
+#define VPIF_CH3_TOP_STRT_ADD_VANC	(0x0158)
+#define VPIF_CH3_BTM_STRT_ADD_VANC	(0x015c)
+#define VPIF_CH3_SP_CFG			(0x0160)
+#define VPIF_CH3_IMG_ADD_OFST		(0x0164)
+#define VPIF_CH3_HANC_ADD_OFST		(0x0168)
+#define VPIF_CH3_H_CFG			(0x016c)
+#define VPIF_CH3_V_CFG_00		(0x0170)
+#define VPIF_CH3_V_CFG_01		(0x0174)
+#define VPIF_CH3_V_CFG_02		(0x0178)
+#define VPIF_CH3_V_CFG_03		(0x017c)
+#define VPIF_CH3_HANC0_STRT		(0x0180)
+#define VPIF_CH3_HANC0_SIZE		(0x0184)
+#define VPIF_CH3_HANC1_STRT		(0x0188)
+#define VPIF_CH3_HANC1_SIZE		(0x018c)
+#define VPIF_CH3_VANC0_STRT		(0x0190)
+#define VPIF_CH3_VANC0_SIZE		(0x0194)
+#define VPIF_CH3_VANC1_STRT		(0x0198)
+#define VPIF_CH3_VANC1_SIZE		(0x019c)
+
+#define VPIF_IODFT_CTRL			(0x01c0)
+
+/* Functions for bit Manipulation */
+static inline void vpif_set_bit(u32 reg, u32 bit)
+{
+	regw((regr(reg)) | (0x01 << bit), reg);
+}
+
+static inline void vpif_clr_bit(u32 reg, u32 bit)
+{
+	regw(((regr(reg)) & ~(0x01 << bit)), reg);
+}
+
+/* Macro for Generating mask */
+#ifdef GENERATE_MASK
+#undef GENERATE_MASK
+#endif
+
+#define GENERATE_MASK(bits, pos) \
+		((((0xFFFFFFFF) << (32 - bits)) >> (32 - bits)) << pos)
+
+/* Bit positions in the channel control registers */
+#define VPIF_CH_DATA_MODE_BIT	(2)
+#define VPIF_CH_YC_MUX_BIT	(3)
+#define VPIF_CH_SDR_FMT_BIT	(4)
+#define VPIF_CH_HANC_EN_BIT	(8)
+#define VPIF_CH_VANC_EN_BIT	(9)
+
+#define VPIF_CAPTURE_CH_NIP	(10)
+#define VPIF_DISPLAY_CH_NIP	(11)
+
+#define VPIF_DISPLAY_PIX_EN_BIT	(10)
+
+#define VPIF_CH_INPUT_FIELD_FRAME_BIT	(12)
+
+#define VPIF_CH_FID_POLARITY_BIT	(15)
+#define VPIF_CH_V_VALID_POLARITY_BIT	(14)
+#define VPIF_CH_H_VALID_POLARITY_BIT	(13)
+#define VPIF_CH_DATA_WIDTH_BIT		(28)
+
+#define VPIF_CH_CLK_EDGE_CTRL_BIT	(31)
+
+/* Mask various length */
+#define VPIF_CH_EAVSAV_MASK	GENERATE_MASK(13, 0)
+#define VPIF_CH_LEN_MASK	GENERATE_MASK(12, 0)
+#define VPIF_CH_WIDTH_MASK	GENERATE_MASK(13, 0)
+#define VPIF_CH_LEN_SHIFT	(16)
+
+/* VPIF masks for registers */
+#define VPIF_REQ_SIZE_MASK	(0x1ff)
+
+/* bit posotion of interrupt vpif_ch_intr register */
+#define VPIF_INTEN_FRAME_CH0	(0x00000001)
+#define VPIF_INTEN_FRAME_CH1	(0x00000002)
+#define VPIF_INTEN_FRAME_CH2	(0x00000004)
+#define VPIF_INTEN_FRAME_CH3	(0x00000008)
+
+/* bit position of clock and channel enable in vpif_chn_ctrl register */
+
+#define VPIF_CH0_CLK_EN		(0x00000002)
+#define VPIF_CH0_EN		(0x00000001)
+#define VPIF_CH1_CLK_EN		(0x00000002)
+#define VPIF_CH1_EN		(0x00000001)
+#define VPIF_CH2_CLK_EN		(0x00000002)
+#define VPIF_CH2_EN		(0x00000001)
+#define VPIF_CH3_CLK_EN		(0x00000002)
+#define VPIF_CH3_EN		(0x00000001)
+#define VPIF_CH_CLK_EN		(0x00000002)
+#define VPIF_CH_EN		(0x00000001)
+
+#define VPIF_INT_TOP	(0x00)
+#define VPIF_INT_BOTTOM	(0x01)
+#define VPIF_INT_BOTH	(0x02)
+
+#define VPIF_CH0_INT_CTRL_SHIFT	(6)
+#define VPIF_CH1_INT_CTRL_SHIFT	(6)
+#define VPIF_CH2_INT_CTRL_SHIFT	(6)
+#define VPIF_CH3_INT_CTRL_SHIFT	(6)
+#define VPIF_CH_INT_CTRL_SHIFT	(6)
+
+/* enabled interrupt on both the fields on vpid_ch0_ctrl register */
+#define channel0_intr_assert()	(regw((regr(VPIF_CH0_CTRL)|\
+	(VPIF_INT_BOTH << VPIF_CH0_INT_CTRL_SHIFT)), VPIF_CH0_CTRL))
+
+/* enabled interrupt on both the fields on vpid_ch1_ctrl register */
+#define channel1_intr_assert()	(regw((regr(VPIF_CH1_CTRL)|\
+	(VPIF_INT_BOTH << VPIF_CH1_INT_CTRL_SHIFT)), VPIF_CH1_CTRL))
+
+/* enabled interrupt on both the fields on vpid_ch0_ctrl register */
+#define channel2_intr_assert() 	(regw((regr(VPIF_CH2_CTRL)|\
+	(VPIF_INT_BOTH << VPIF_CH2_INT_CTRL_SHIFT)), VPIF_CH2_CTRL))
+
+/* enabled interrupt on both the fields on vpid_ch1_ctrl register */
+#define channel3_intr_assert() 	(regw((regr(VPIF_CH3_CTRL)|\
+	(VPIF_INT_BOTH << VPIF_CH3_INT_CTRL_SHIFT)), VPIF_CH3_CTRL))
+
+#define VPIF_CH_FID_MASK	(0x20)
+#define VPIF_CH_FID_SHIFT	(5)
+
+#define VPIF_NTSC_VBI_START_FIELD0	(1)
+#define VPIF_NTSC_VBI_START_FIELD1	(263)
+#define VPIF_PAL_VBI_START_FIELD0	(624)
+#define VPIF_PAL_VBI_START_FIELD1	(311)
+
+#define VPIF_NTSC_HBI_START_FIELD0	(1)
+#define VPIF_NTSC_HBI_START_FIELD1	(263)
+#define VPIF_PAL_HBI_START_FIELD0	(624)
+#define VPIF_PAL_HBI_START_FIELD1	(311)
+
+#define VPIF_NTSC_VBI_COUNT_FIELD0	(20)
+#define VPIF_NTSC_VBI_COUNT_FIELD1	(19)
+#define VPIF_PAL_VBI_COUNT_FIELD0	(24)
+#define VPIF_PAL_VBI_COUNT_FIELD1	(25)
+
+#define VPIF_NTSC_HBI_COUNT_FIELD0	(263)
+#define VPIF_NTSC_HBI_COUNT_FIELD1	(262)
+#define VPIF_PAL_HBI_COUNT_FIELD0	(312)
+#define VPIF_PAL_HBI_COUNT_FIELD1	(313)
+
+#define VPIF_NTSC_VBI_SAMPLES_PER_LINE	(720)
+#define VPIF_PAL_VBI_SAMPLES_PER_LINE	(720)
+#define VPIF_NTSC_HBI_SAMPLES_PER_LINE	(268)
+#define VPIF_PAL_HBI_SAMPLES_PER_LINE	(280)
+
+#define VPIF_CH_VANC_EN			(0x20)
+#define VPIF_DMA_REQ_SIZE		(0x080)
+#define VPIF_EMULATION_DISABLE		(0x01)
+
+extern u8 irq_vpif_capture_channel[VPIF_NUM_CHANNELS];
+
+/* inline function to enable/disable channel0 */
+static inline void enable_channel0(int enable)
+{
+	if (enable)
+		regw((regr(VPIF_CH0_CTRL) | (VPIF_CH0_EN)), VPIF_CH0_CTRL);
+	else
+		regw((regr(VPIF_CH0_CTRL) & (~VPIF_CH0_EN)), VPIF_CH0_CTRL);
+}
+
+/* inline function to enable/disable channel1 */
+static inline void enable_channel1(int enable)
+{
+	if (enable)
+		regw((regr(VPIF_CH1_CTRL) | (VPIF_CH1_EN)), VPIF_CH1_CTRL);
+	else
+		regw((regr(VPIF_CH1_CTRL) & (~VPIF_CH1_EN)), VPIF_CH1_CTRL);
+}
+
+/* inline function to enable interrupt for channel0 */
+static inline void channel0_intr_enable(int enable)
+{
+	if (enable) {
+		regw((regr(VPIF_INTEN) | 0x10), VPIF_INTEN);
+		regw((regr(VPIF_INTEN_SET) | 0x10), VPIF_INTEN_SET);
+
+		regw((regr(VPIF_INTEN) | VPIF_INTEN_FRAME_CH0), VPIF_INTEN);
+		regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH0),
+							VPIF_INTEN_SET);
+	} else {
+		regw((regr(VPIF_INTEN) & (~VPIF_INTEN_FRAME_CH0)), VPIF_INTEN);
+		regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH0),
+							VPIF_INTEN_SET);
+	}
+}
+
+/* inline function to enable interrupt for channel1 */
+static inline void channel1_intr_enable(int enable)
+{
+	if (enable) {
+		regw((regr(VPIF_INTEN) | 0x10), VPIF_INTEN);
+		regw((regr(VPIF_INTEN_SET) | 0x10), VPIF_INTEN_SET);
+
+		regw((regr(VPIF_INTEN) | VPIF_INTEN_FRAME_CH1), VPIF_INTEN);
+		regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH1),
+							VPIF_INTEN_SET);
+	} else {
+		regw((regr(VPIF_INTEN) & (~VPIF_INTEN_FRAME_CH1)), VPIF_INTEN);
+		regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH1),
+							VPIF_INTEN_SET);
+	}
+}
+
+/* inline function to set buffer addresses in case of Y/C non mux mode */
+static inline void ch0_set_videobuf_addr_yc_nmux(unsigned long top_strt_luma,
+						 unsigned long btm_strt_luma,
+						 unsigned long top_strt_chroma,
+						 unsigned long btm_strt_chroma)
+{
+	regw(top_strt_luma, VPIF_CH0_TOP_STRT_ADD_LUMA);
+	regw(btm_strt_luma, VPIF_CH0_BTM_STRT_ADD_LUMA);
+	regw(top_strt_chroma, VPIF_CH1_TOP_STRT_ADD_CHROMA);
+	regw(btm_strt_chroma, VPIF_CH1_BTM_STRT_ADD_CHROMA);
+}
+
+/* inline function to set buffer addresses in VPIF registers for video data */
+static inline void ch0_set_videobuf_addr(unsigned long top_strt_luma,
+					 unsigned long btm_strt_luma,
+					 unsigned long top_strt_chroma,
+					 unsigned long btm_strt_chroma)
+{
+	regw(top_strt_luma, VPIF_CH0_TOP_STRT_ADD_LUMA);
+	regw(btm_strt_luma, VPIF_CH0_BTM_STRT_ADD_LUMA);
+	regw(top_strt_chroma, VPIF_CH0_TOP_STRT_ADD_CHROMA);
+	regw(btm_strt_chroma, VPIF_CH0_BTM_STRT_ADD_CHROMA);
+}
+
+static inline void ch1_set_videobuf_addr(unsigned long top_strt_luma,
+					 unsigned long btm_strt_luma,
+					 unsigned long top_strt_chroma,
+					 unsigned long btm_strt_chroma)
+{
+
+	regw(top_strt_luma, VPIF_CH1_TOP_STRT_ADD_LUMA);
+	regw(btm_strt_luma, VPIF_CH1_BTM_STRT_ADD_LUMA);
+	regw(top_strt_chroma, VPIF_CH1_TOP_STRT_ADD_CHROMA);
+	regw(btm_strt_chroma, VPIF_CH1_BTM_STRT_ADD_CHROMA);
+}
+
+static inline void ch0_set_vbi_addr(unsigned long top_vbi,
+	unsigned long btm_vbi, unsigned long a, unsigned long b)
+{
+	regw(top_vbi, VPIF_CH0_TOP_STRT_ADD_VANC);
+	regw(btm_vbi, VPIF_CH0_BTM_STRT_ADD_VANC);
+}
+
+static inline void ch0_set_hbi_addr(unsigned long top_vbi,
+	unsigned long btm_vbi, unsigned long a, unsigned long b)
+{
+	regw(top_vbi, VPIF_CH0_TOP_STRT_ADD_HANC);
+	regw(btm_vbi, VPIF_CH0_BTM_STRT_ADD_HANC);
+}
+
+static inline void ch1_set_vbi_addr(unsigned long top_vbi,
+	unsigned long btm_vbi, unsigned long a, unsigned long b)
+{
+	regw(top_vbi, VPIF_CH1_TOP_STRT_ADD_VANC);
+	regw(btm_vbi, VPIF_CH1_BTM_STRT_ADD_VANC);
+}
+
+static inline void ch1_set_hbi_addr(unsigned long top_vbi,
+	unsigned long btm_vbi, unsigned long a, unsigned long b)
+{
+	regw(top_vbi, VPIF_CH1_TOP_STRT_ADD_HANC);
+	regw(btm_vbi, VPIF_CH1_BTM_STRT_ADD_HANC);
+}
+
+/* Inline function to enable raw vbi in the given channel */
+static inline void disable_raw_feature(u8 channel_id, u8 index)
+{
+	u32 ctrl_reg;
+	if (0 == channel_id)
+		ctrl_reg = VPIF_CH0_CTRL;
+	else
+		ctrl_reg = VPIF_CH1_CTRL;
+
+	if (1 == index)
+		vpif_clr_bit(ctrl_reg, VPIF_CH_VANC_EN_BIT);
+	else
+		vpif_clr_bit(ctrl_reg, VPIF_CH_HANC_EN_BIT);
+}
+
+static inline void enable_raw_feature(u8 channel_id, u8 index)
+{
+	u32 ctrl_reg;
+	if (0 == channel_id)
+		ctrl_reg = VPIF_CH0_CTRL;
+	else
+		ctrl_reg = VPIF_CH1_CTRL;
+
+	if (1 == index)
+		vpif_set_bit(ctrl_reg, VPIF_CH_VANC_EN_BIT);
+	else
+		vpif_set_bit(ctrl_reg, VPIF_CH_HANC_EN_BIT);
+}
+
+/* inline function to enable/disable channel2 */
+static inline void enable_channel2(int enable)
+{
+	if (enable) {
+		regw((regr(VPIF_CH2_CTRL) | (VPIF_CH2_CLK_EN)), VPIF_CH2_CTRL);
+		regw((regr(VPIF_CH2_CTRL) | (VPIF_CH2_EN)), VPIF_CH2_CTRL);
+	} else {
+		regw((regr(VPIF_CH2_CTRL) & (~VPIF_CH2_CLK_EN)), VPIF_CH2_CTRL);
+		regw((regr(VPIF_CH2_CTRL) & (~VPIF_CH2_EN)), VPIF_CH2_CTRL);
+	}
+}
+
+/* inline function to enable/disable channel3 */
+static inline void enable_channel3(int enable)
+{
+	if (enable) {
+		regw((regr(VPIF_CH3_CTRL) | (VPIF_CH3_CLK_EN)), VPIF_CH3_CTRL);
+		regw((regr(VPIF_CH3_CTRL) | (VPIF_CH3_EN)), VPIF_CH3_CTRL);
+	} else {
+		regw((regr(VPIF_CH3_CTRL) & (~VPIF_CH3_CLK_EN)), VPIF_CH3_CTRL);
+		regw((regr(VPIF_CH3_CTRL) & (~VPIF_CH3_EN)), VPIF_CH3_CTRL);
+	}
+}
+
+/* inline function to enable interrupt for channel2 */
+static inline void channel2_intr_enable(int enable)
+{
+	if (enable) {
+		regw((regr(VPIF_INTEN) | 0x10), VPIF_INTEN);
+		regw((regr(VPIF_INTEN_SET) | 0x10), VPIF_INTEN_SET);
+		regw((regr(VPIF_INTEN) | VPIF_INTEN_FRAME_CH2), VPIF_INTEN);
+		regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH2),
+							VPIF_INTEN_SET);
+	} else {
+		regw((regr(VPIF_INTEN) & (~VPIF_INTEN_FRAME_CH2)), VPIF_INTEN);
+		regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH2),
+							VPIF_INTEN_SET);
+	}
+}
+
+/* inline function to enable interrupt for channel3 */
+static inline void channel3_intr_enable(int enable)
+{
+	if (enable) {
+		regw((regr(VPIF_INTEN) | 0x10), VPIF_INTEN);
+		regw((regr(VPIF_INTEN_SET) | 0x10), VPIF_INTEN_SET);
+
+		regw((regr(VPIF_INTEN) | VPIF_INTEN_FRAME_CH3), VPIF_INTEN);
+		regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH3),
+							VPIF_INTEN_SET);
+	} else {
+		regw((regr(VPIF_INTEN) & (~VPIF_INTEN_FRAME_CH3)), VPIF_INTEN);
+		regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH3),
+							VPIF_INTEN_SET);
+	}
+}
+
+/* inline function to enable raw vbi data for channel2 */
+static inline void channel2_raw_enable(int enable, u8 index)
+{
+	u32 mask;
+
+	if (1 == index)
+		mask = VPIF_CH_VANC_EN_BIT;
+	else
+		mask = VPIF_CH_HANC_EN_BIT;
+
+	if (enable)
+		vpif_set_bit(VPIF_CH2_CTRL, mask);
+	else
+		vpif_clr_bit(VPIF_CH2_CTRL, mask);
+}
+
+/* inline function to enable raw vbi data for channel3*/
+static inline void channel3_raw_enable(int enable, u8 index)
+{
+	u32 mask;
+
+	if (1 == index)
+		mask = VPIF_CH_VANC_EN_BIT;
+	else
+		mask = VPIF_CH_HANC_EN_BIT;
+
+	if (enable)
+		vpif_set_bit(VPIF_CH3_CTRL, mask);
+	else
+		vpif_clr_bit(VPIF_CH3_CTRL, mask);
+}
+
+/* inline function to set buffer addresses in case of Y/C non mux mode */
+static inline void ch2_set_videobuf_addr_yc_nmux(unsigned long top_strt_luma,
+						 unsigned long btm_strt_luma,
+						 unsigned long top_strt_chroma,
+						 unsigned long btm_strt_chroma)
+{
+	regw(top_strt_luma, VPIF_CH2_TOP_STRT_ADD_LUMA);
+	regw(btm_strt_luma, VPIF_CH2_BTM_STRT_ADD_LUMA);
+	regw(top_strt_chroma, VPIF_CH3_TOP_STRT_ADD_CHROMA);
+	regw(btm_strt_chroma, VPIF_CH3_BTM_STRT_ADD_CHROMA);
+}
+
+/* inline function to set buffer addresses in VPIF registers for video data */
+static inline void ch2_set_videobuf_addr(unsigned long top_strt_luma,
+					 unsigned long btm_strt_luma,
+					 unsigned long top_strt_chroma,
+					 unsigned long btm_strt_chroma)
+{
+	regw(top_strt_luma, VPIF_CH2_TOP_STRT_ADD_LUMA);
+	regw(btm_strt_luma, VPIF_CH2_BTM_STRT_ADD_LUMA);
+	regw(top_strt_chroma, VPIF_CH2_TOP_STRT_ADD_CHROMA);
+	regw(btm_strt_chroma, VPIF_CH2_BTM_STRT_ADD_CHROMA);
+}
+
+static inline void ch3_set_videobuf_addr(unsigned long top_strt_luma,
+					 unsigned long btm_strt_luma,
+					 unsigned long top_strt_chroma,
+					 unsigned long btm_strt_chroma)
+{
+	regw(top_strt_luma, VPIF_CH3_TOP_STRT_ADD_LUMA);
+	regw(btm_strt_luma, VPIF_CH3_BTM_STRT_ADD_LUMA);
+	regw(top_strt_chroma, VPIF_CH3_TOP_STRT_ADD_CHROMA);
+	regw(btm_strt_chroma, VPIF_CH3_BTM_STRT_ADD_CHROMA);
+}
+
+/* inline function to set buffer addresses in VPIF registers for vbi data */
+static inline void ch2_set_vbi_addr(unsigned long top_strt_luma,
+					 unsigned long btm_strt_luma,
+					 unsigned long top_strt_chroma,
+					 unsigned long btm_strt_chroma)
+{
+	regw(top_strt_luma, VPIF_CH2_TOP_STRT_ADD_VANC);
+	regw(btm_strt_luma, VPIF_CH2_BTM_STRT_ADD_VANC);
+}
+
+static inline void ch3_set_vbi_addr(unsigned long top_strt_luma,
+					 unsigned long btm_strt_luma,
+					 unsigned long top_strt_chroma,
+					 unsigned long btm_strt_chroma)
+{
+	regw(top_strt_luma, VPIF_CH3_TOP_STRT_ADD_VANC);
+	regw(btm_strt_luma, VPIF_CH3_BTM_STRT_ADD_VANC);
+}
+
+#define VPIF_MAX_NAME	(30)
+
+/* This structure will store size parameters as per the mode selected by user */
+struct vpif_channel_config_params {
+	char name[VPIF_MAX_NAME];	/* Name of the mode */
+	u16 width;			/* Indicates width of the image */
+	u16 height;			/* Indicates height of the image */
+	u8 fps;
+	u8 frm_fmt;			/* Indicates whether this is interlaced
+					 * or progressive format */
+	u8 ycmux_mode;			/* Indicates whether this mode requires
+					 * single or two channels */
+	u16 eav2sav;			/* length of sav 2 eav */
+	u16 sav2eav;			/* length of sav 2 eav */
+	u16 l1, l3, l5, l7, l9, l11;	/* Other parameter configurations */
+	u16 vsize;			/* Vertical size of the image */
+	u8 capture_format;		/* Indicates whether capture format
+					 * is in BT or in CCD/CMOS */
+	u8  vbi_supported;		/* Indicates whether this mode
+					 * supports capturing vbi or not */
+	u8 hd_sd;
+	v4l2_std_id stdid;
+};
+
+struct vpif_interface;
+struct vpif_params;
+struct vpif_vbi_params;
+
+int vpif_set_video_params(struct vpif_params *vpifparams, u8 channel_id);
+void vpif_set_vbi_display_params(struct vpif_vbi_params *vbiparams,
+							u8 channel_id);
+int vpif_channel_getfid(u8 channel_id);
+void vpif_base_addr_init(void __iomem *base);
+
+/* Enumerated data types */
+enum vpif_capture_pinpol {
+	VPIF_CAPTURE_PINPOL_SAME	= 0,
+	VPIF_CAPTURE_PINPOL_INVERT	= 1
+};
+
+enum data_size {
+	_8BITS = 0,
+	_10BITS,
+	_12BITS,
+};
+
+struct vpif_capture_params_raw {
+	enum data_size data_sz;
+	enum vpif_capture_pinpol fid_pol;
+	enum vpif_capture_pinpol vd_pol;
+	enum vpif_capture_pinpol hd_pol;
+};
+
+/* Structure for vpif parameters for raw vbi data */
+struct vpif_vbi_params {
+	__u32 hstart0;  /* Horizontal start of raw vbi data for first field */
+	__u32 vstart0;  /* Vertical start of raw vbi data for first field */
+	__u32 hsize0;   /* Horizontal size of raw vbi data for first field */
+	__u32 vsize0;   /* Vertical size of raw vbi data for first field */
+	__u32 hstart1;  /* Horizontal start of raw vbi data for second field */
+	__u32 vstart1;  /* Vertical start of raw vbi data for second field */
+	__u32 hsize1;   /* Horizontal size of raw vbi data for second field */
+	__u32 vsize1;   /* Vertical size of raw vbi data for second field */
+};
+
+/* structure for vpif parameters */
+struct vpif_interface {
+	__u8 storage_mode;	/* Indicates field or frame mode */
+	unsigned long hpitch;
+	v4l2_std_id stdid;
+};
+
+struct vpif_params {
+	struct vpif_interface video_params;
+	struct vpif_channel_config_params std_info;
+	union param {
+		struct vpif_vbi_params	vbi_params;
+		struct vpif_capture_params_raw	raw_params;
+	} params;
+};
+
+#endif				/* End of #ifndef VPIF_H */
+
-- 
cgit v1.2.3


From e7332e3a552f6e18b39f5b77ce964818d10c9743 Mon Sep 17 00:00:00 2001
From: Chaithrika U S <chaithrika@ti.com>
Date: Tue, 9 Jun 2009 05:55:37 -0300
Subject: V4L/DVB (12176): davinci/vpif_display: Add VPIF display driver

Adds the VPIF display driver and the associated header file.

Signed-off-by: Manjunath Hadli <mrh@ti.com>
Signed-off-by: Brijesh Jadav <brijesh.j@ti.com>
Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/davinci/vpif_display.c | 1664 ++++++++++++++++++++++++++++
 drivers/media/video/davinci/vpif_display.h |  175 +++
 2 files changed, 1839 insertions(+)
 create mode 100644 drivers/media/video/davinci/vpif_display.c
 create mode 100644 drivers/media/video/davinci/vpif_display.h

(limited to 'drivers/media')

diff --git a/drivers/media/video/davinci/vpif_display.c b/drivers/media/video/davinci/vpif_display.c
new file mode 100644
index 00000000000..5e2b86b3fa6
--- /dev/null
+++ b/drivers/media/video/davinci/vpif_display.c
@@ -0,0 +1,1664 @@
+/*
+ * vpif-display - VPIF display driver
+ * Display driver for TI DaVinci VPIF
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed .as is. WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/string.h>
+#include <linux/videodev2.h>
+#include <linux/wait.h>
+#include <linux/time.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/version.h>
+
+#include <asm/irq.h>
+#include <asm/page.h>
+
+#include <media/adv7343.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+
+#include <mach/dm646x.h>
+
+#include "vpif_display.h"
+#include "vpif.h"
+
+MODULE_DESCRIPTION("TI DaVinci VPIF Display driver");
+MODULE_LICENSE("GPL");
+
+#define DM646X_V4L2_STD (V4L2_STD_525_60 | V4L2_STD_625_50)
+
+#define vpif_err(fmt, arg...)	v4l2_err(&vpif_obj.v4l2_dev, fmt, ## arg)
+#define vpif_dbg(level, debug, fmt, arg...)	\
+		v4l2_dbg(level, debug, &vpif_obj.v4l2_dev, fmt, ## arg)
+
+static int debug = 1;
+static u32 ch2_numbuffers = 3;
+static u32 ch3_numbuffers = 3;
+static u32 ch2_bufsize = 1920 * 1080 * 2;
+static u32 ch3_bufsize = 720 * 576 * 2;
+
+module_param(debug, int, 0644);
+module_param(ch2_numbuffers, uint, S_IRUGO);
+module_param(ch3_numbuffers, uint, S_IRUGO);
+module_param(ch2_bufsize, uint, S_IRUGO);
+module_param(ch3_bufsize, uint, S_IRUGO);
+
+MODULE_PARM_DESC(debug, "Debug level 0-1");
+MODULE_PARM_DESC(ch2_numbuffers, "Channel2 buffer count (default:3)");
+MODULE_PARM_DESC(ch3_numbuffers, "Channel3 buffer count (default:3)");
+MODULE_PARM_DESC(ch2_bufsize, "Channel2 buffer size (default:1920 x 1080 x 2)");
+MODULE_PARM_DESC(ch3_bufsize, "Channel3 buffer size (default:720 x 576 x 2)");
+
+static struct vpif_config_params config_params = {
+	.min_numbuffers		= 3,
+	.numbuffers[0]		= 3,
+	.numbuffers[1]		= 3,
+	.min_bufsize[0]		= 720 * 480 * 2,
+	.min_bufsize[1]		= 720 * 480 * 2,
+	.channel_bufsize[0]	= 1920 * 1080 * 2,
+	.channel_bufsize[1]	= 720 * 576 * 2,
+};
+
+static struct vpif_device vpif_obj = { {NULL} };
+static struct device *vpif_dev;
+
+static const struct vpif_channel_config_params ch_params[] = {
+	{
+		"NTSC", 720, 480, 30, 0, 1, 268, 1440, 1, 23, 263, 266,
+		286, 525, 525, 0, 1, 0, V4L2_STD_525_60,
+	},
+	{
+		"PAL", 720, 576, 25, 0, 1, 280, 1440, 1, 23, 311, 313,
+		336, 624, 625, 0, 1, 0, V4L2_STD_625_50,
+	},
+};
+
+/*
+ * vpif_uservirt_to_phys: This function is used to convert user
+ * space virtual address to physical address.
+ */
+static u32 vpif_uservirt_to_phys(u32 virtp)
+{
+	struct mm_struct *mm = current->mm;
+	unsigned long physp = 0;
+	struct vm_area_struct *vma;
+
+	vma = find_vma(mm, virtp);
+
+	/* For kernel direct-mapped memory, take the easy way */
+	if (virtp >= PAGE_OFFSET) {
+		physp = virt_to_phys((void *)virtp);
+	} else if (vma && (vma->vm_flags & VM_IO) && (vma->vm_pgoff)) {
+		/* this will catch, kernel-allocated, mmaped-to-usermode addr */
+		physp = (vma->vm_pgoff << PAGE_SHIFT) + (virtp - vma->vm_start);
+	} else {
+		/* otherwise, use get_user_pages() for general userland pages */
+		int res, nr_pages = 1;
+		struct page *pages;
+		down_read(&current->mm->mmap_sem);
+
+		res = get_user_pages(current, current->mm,
+				     virtp, nr_pages, 1, 0, &pages, NULL);
+		up_read(&current->mm->mmap_sem);
+
+		if (res == nr_pages) {
+			physp = __pa(page_address(&pages[0]) +
+							(virtp & ~PAGE_MASK));
+		} else {
+			vpif_err("get_user_pages failed\n");
+			return 0;
+		}
+	}
+
+	return physp;
+}
+
+/*
+ * buffer_prepare: This is the callback function called from videobuf_qbuf()
+ * function the buffer is prepared and user space virtual address is converted
+ * into physical address
+ */
+static int vpif_buffer_prepare(struct videobuf_queue *q,
+			       struct videobuf_buffer *vb,
+			       enum v4l2_field field)
+{
+	struct vpif_fh *fh = q->priv_data;
+	struct common_obj *common;
+	unsigned long addr;
+
+	common = &fh->channel->common[VPIF_VIDEO_INDEX];
+	if (VIDEOBUF_NEEDS_INIT == vb->state) {
+		vb->width	= common->width;
+		vb->height	= common->height;
+		vb->size	= vb->width * vb->height;
+		vb->field	= field;
+	}
+	vb->state = VIDEOBUF_PREPARED;
+
+	/* if user pointer memory mechanism is used, get the physical
+	 * address of the buffer */
+	if (V4L2_MEMORY_USERPTR == common->memory) {
+		if (!vb->baddr) {
+			vpif_err("buffer_address is 0\n");
+			return -EINVAL;
+		}
+
+		vb->boff = vpif_uservirt_to_phys(vb->baddr);
+		if (!ISALIGNED(vb->boff))
+			goto buf_align_exit;
+	}
+
+	addr = vb->boff;
+	if (q->streaming && (V4L2_BUF_TYPE_SLICED_VBI_OUTPUT != q->type)) {
+		if (!ISALIGNED(addr + common->ytop_off) ||
+		    !ISALIGNED(addr + common->ybtm_off) ||
+		    !ISALIGNED(addr + common->ctop_off) ||
+		    !ISALIGNED(addr + common->cbtm_off))
+			goto buf_align_exit;
+	}
+	return 0;
+
+buf_align_exit:
+	vpif_err("buffer offset not aligned to 8 bytes\n");
+	return -EINVAL;
+}
+
+/*
+ * vpif_buffer_setup: This function allocates memory for the buffers
+ */
+static int vpif_buffer_setup(struct videobuf_queue *q, unsigned int *count,
+				unsigned int *size)
+{
+	struct vpif_fh *fh = q->priv_data;
+	struct channel_obj *ch = fh->channel;
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+
+	if (V4L2_MEMORY_MMAP != common->memory)
+		return 0;
+
+	*size = config_params.channel_bufsize[ch->channel_id];
+	if (*count < config_params.min_numbuffers)
+		*count = config_params.min_numbuffers;
+
+	return 0;
+}
+
+/*
+ * vpif_buffer_queue: This function adds the buffer to DMA queue
+ */
+static void vpif_buffer_queue(struct videobuf_queue *q,
+			      struct videobuf_buffer *vb)
+{
+	struct vpif_fh *fh = q->priv_data;
+	struct common_obj *common;
+
+	common = &fh->channel->common[VPIF_VIDEO_INDEX];
+
+	/* add the buffer to the DMA queue */
+	list_add_tail(&vb->queue, &common->dma_queue);
+	vb->state = VIDEOBUF_QUEUED;
+}
+
+/*
+ * vpif_buffer_release: This function is called from the videobuf layer to
+ * free memory allocated to the buffers
+ */
+static void vpif_buffer_release(struct videobuf_queue *q,
+				struct videobuf_buffer *vb)
+{
+	struct vpif_fh *fh = q->priv_data;
+	struct channel_obj *ch = fh->channel;
+	struct common_obj *common;
+	unsigned int buf_size = 0;
+
+	common = &ch->common[VPIF_VIDEO_INDEX];
+
+	videobuf_dma_contig_free(q, vb);
+	vb->state = VIDEOBUF_NEEDS_INIT;
+
+	if (V4L2_MEMORY_MMAP != common->memory)
+		return;
+
+	buf_size = config_params.channel_bufsize[ch->channel_id];
+}
+
+static struct videobuf_queue_ops video_qops = {
+	.buf_setup	= vpif_buffer_setup,
+	.buf_prepare	= vpif_buffer_prepare,
+	.buf_queue	= vpif_buffer_queue,
+	.buf_release	= vpif_buffer_release,
+};
+static u8 channel_first_int[VPIF_NUMOBJECTS][2] = { {1, 1} };
+
+static void process_progressive_mode(struct common_obj *common)
+{
+	unsigned long addr = 0;
+
+	/* Get the next buffer from buffer queue */
+	common->next_frm = list_entry(common->dma_queue.next,
+				struct videobuf_buffer, queue);
+	/* Remove that buffer from the buffer queue */
+	list_del(&common->next_frm->queue);
+	/* Mark status of the buffer as active */
+	common->next_frm->state = VIDEOBUF_ACTIVE;
+
+	/* Set top and bottom field addrs in VPIF registers */
+	addr = videobuf_to_dma_contig(common->next_frm);
+	common->set_addr(addr + common->ytop_off,
+				 addr + common->ybtm_off,
+				 addr + common->ctop_off,
+				 addr + common->cbtm_off);
+}
+
+static void process_interlaced_mode(int fid, struct common_obj *common)
+{
+	/* device field id and local field id are in sync */
+	/* If this is even field */
+	if (0 == fid) {
+		if (common->cur_frm == common->next_frm)
+			return;
+
+		/* one frame is displayed If next frame is
+		 *  available, release cur_frm and move on */
+		/* Copy frame display time */
+		do_gettimeofday(&common->cur_frm->ts);
+		/* Change status of the cur_frm */
+		common->cur_frm->state = VIDEOBUF_DONE;
+		/* unlock semaphore on cur_frm */
+		wake_up_interruptible(&common->cur_frm->done);
+		/* Make cur_frm pointing to next_frm */
+		common->cur_frm = common->next_frm;
+
+	} else if (1 == fid) {	/* odd field */
+		if (list_empty(&common->dma_queue)
+		    || (common->cur_frm != common->next_frm)) {
+			return;
+		}
+		/* one field is displayed configure the next
+		 * frame if it is available else hold on current
+		 * frame */
+		/* Get next from the buffer queue */
+		process_progressive_mode(common);
+
+	}
+}
+
+/*
+ * vpif_channel_isr: It changes status of the displayed buffer, takes next
+ * buffer from the queue and sets its address in VPIF registers
+ */
+static irqreturn_t vpif_channel_isr(int irq, void *dev_id)
+{
+	struct vpif_device *dev = &vpif_obj;
+	struct channel_obj *ch;
+	struct common_obj *common;
+	enum v4l2_field field;
+	int fid = -1, i;
+	int channel_id = 0;
+
+	channel_id = *(int *)(dev_id);
+	ch = dev->dev[channel_id];
+	field = ch->common[VPIF_VIDEO_INDEX].fmt.fmt.pix.field;
+	for (i = 0; i < VPIF_NUMOBJECTS; i++) {
+		common = &ch->common[i];
+		/* If streaming is started in this channel */
+		if (0 == common->started)
+			continue;
+
+		if (1 == ch->vpifparams.std_info.frm_fmt) {
+			if (list_empty(&common->dma_queue))
+				continue;
+
+			/* Progressive mode */
+			if (!channel_first_int[i][channel_id]) {
+				/* Mark status of the cur_frm to
+				 * done and unlock semaphore on it */
+				do_gettimeofday(&common->cur_frm->ts);
+				common->cur_frm->state = VIDEOBUF_DONE;
+				wake_up_interruptible(&common->cur_frm->done);
+				/* Make cur_frm pointing to next_frm */
+				common->cur_frm = common->next_frm;
+			}
+
+			channel_first_int[i][channel_id] = 0;
+			process_progressive_mode(common);
+		} else {
+			/* Interlaced mode */
+			/* If it is first interrupt, ignore it */
+
+			if (channel_first_int[i][channel_id]) {
+				channel_first_int[i][channel_id] = 0;
+				continue;
+			}
+
+			if (0 == i) {
+				ch->field_id ^= 1;
+				/* Get field id from VPIF registers */
+				fid = vpif_channel_getfid(ch->channel_id + 2);
+				/* If fid does not match with stored field id */
+				if (fid != ch->field_id) {
+					/* Make them in sync */
+					if (0 == fid)
+						ch->field_id = fid;
+
+					return IRQ_HANDLED;
+				}
+			}
+			process_interlaced_mode(fid, common);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int vpif_get_std_info(struct channel_obj *ch)
+{
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+	struct video_obj *vid_ch = &ch->video;
+	struct vpif_params *vpifparams = &ch->vpifparams;
+	struct vpif_channel_config_params *std_info = &vpifparams->std_info;
+	const struct vpif_channel_config_params *config;
+
+	int index;
+
+	std_info->stdid = vid_ch->stdid;
+	if (!std_info)
+		return -1;
+
+	for (index = 0; index < ARRAY_SIZE(ch_params); index++) {
+		config = &ch_params[index];
+		if (config->stdid & std_info->stdid) {
+			memcpy(std_info, config, sizeof(*config));
+			break;
+		}
+	}
+
+	if (index == ARRAY_SIZE(ch_params))
+		return -1;
+
+	common->fmt.fmt.pix.width = std_info->width;
+	common->fmt.fmt.pix.height = std_info->height;
+	vpif_dbg(1, debug, "Pixel details: Width = %d,Height = %d\n",
+			common->fmt.fmt.pix.width, common->fmt.fmt.pix.height);
+
+	/* Set height and width paramateres */
+	ch->common[VPIF_VIDEO_INDEX].height = std_info->height;
+	ch->common[VPIF_VIDEO_INDEX].width = std_info->width;
+
+	return 0;
+}
+
+/*
+ * vpif_calculate_offsets: This function calculates buffers offset for Y and C
+ * in the top and bottom field
+ */
+static void vpif_calculate_offsets(struct channel_obj *ch)
+{
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+	struct vpif_params *vpifparams = &ch->vpifparams;
+	enum v4l2_field field = common->fmt.fmt.pix.field;
+	struct video_obj *vid_ch = &ch->video;
+	unsigned int hpitch, vpitch, sizeimage;
+
+	if (V4L2_FIELD_ANY == common->fmt.fmt.pix.field) {
+		if (ch->vpifparams.std_info.frm_fmt)
+			vid_ch->buf_field = V4L2_FIELD_NONE;
+		else
+			vid_ch->buf_field = V4L2_FIELD_INTERLACED;
+	} else {
+		vid_ch->buf_field = common->fmt.fmt.pix.field;
+	}
+
+	if (V4L2_MEMORY_USERPTR == common->memory)
+		sizeimage = common->fmt.fmt.pix.sizeimage;
+	else
+		sizeimage = config_params.channel_bufsize[ch->channel_id];
+
+	hpitch = common->fmt.fmt.pix.bytesperline;
+	vpitch = sizeimage / (hpitch * 2);
+	if ((V4L2_FIELD_NONE == vid_ch->buf_field) ||
+	    (V4L2_FIELD_INTERLACED == vid_ch->buf_field)) {
+		common->ytop_off = 0;
+		common->ybtm_off = hpitch;
+		common->ctop_off = sizeimage / 2;
+		common->cbtm_off = sizeimage / 2 + hpitch;
+	} else if (V4L2_FIELD_SEQ_TB == vid_ch->buf_field) {
+		common->ytop_off = 0;
+		common->ybtm_off = sizeimage / 4;
+		common->ctop_off = sizeimage / 2;
+		common->cbtm_off = common->ctop_off + sizeimage / 4;
+	} else if (V4L2_FIELD_SEQ_BT == vid_ch->buf_field) {
+		common->ybtm_off = 0;
+		common->ytop_off = sizeimage / 4;
+		common->cbtm_off = sizeimage / 2;
+		common->ctop_off = common->cbtm_off + sizeimage / 4;
+	}
+
+	if ((V4L2_FIELD_NONE == vid_ch->buf_field) ||
+	    (V4L2_FIELD_INTERLACED == vid_ch->buf_field)) {
+		vpifparams->video_params.storage_mode = 1;
+	} else {
+		vpifparams->video_params.storage_mode = 0;
+	}
+
+	if (ch->vpifparams.std_info.frm_fmt == 1) {
+		vpifparams->video_params.hpitch =
+		    common->fmt.fmt.pix.bytesperline;
+	} else {
+		if ((field == V4L2_FIELD_ANY) ||
+			(field == V4L2_FIELD_INTERLACED))
+			vpifparams->video_params.hpitch =
+			    common->fmt.fmt.pix.bytesperline * 2;
+		else
+			vpifparams->video_params.hpitch =
+			    common->fmt.fmt.pix.bytesperline;
+	}
+
+	ch->vpifparams.video_params.stdid = ch->vpifparams.std_info.stdid;
+}
+
+static void vpif_config_format(struct channel_obj *ch)
+{
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+
+	common->fmt.fmt.pix.field = V4L2_FIELD_ANY;
+	if (config_params.numbuffers[ch->channel_id] == 0)
+		common->memory = V4L2_MEMORY_USERPTR;
+	else
+		common->memory = V4L2_MEMORY_MMAP;
+
+	common->fmt.fmt.pix.sizeimage =
+			config_params.channel_bufsize[ch->channel_id];
+	common->fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_YUV422P;
+	common->fmt.type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
+}
+
+static int vpif_check_format(struct channel_obj *ch,
+			     struct v4l2_pix_format *pixfmt)
+{
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+	enum v4l2_field field = pixfmt->field;
+	u32 sizeimage, hpitch, vpitch;
+
+	if (pixfmt->pixelformat != V4L2_PIX_FMT_YUV422P)
+		goto invalid_fmt_exit;
+
+	if (!(VPIF_VALID_FIELD(field)))
+		goto invalid_fmt_exit;
+
+	if (pixfmt->bytesperline <= 0)
+		goto invalid_pitch_exit;
+
+	if (V4L2_MEMORY_USERPTR == common->memory)
+		sizeimage = pixfmt->sizeimage;
+	else
+		sizeimage = config_params.channel_bufsize[ch->channel_id];
+
+	if (vpif_get_std_info(ch)) {
+		vpif_err("Error getting the standard info\n");
+		return -EINVAL;
+	}
+
+	hpitch = pixfmt->bytesperline;
+	vpitch = sizeimage / (hpitch * 2);
+
+	/* Check for valid value of pitch */
+	if ((hpitch < ch->vpifparams.std_info.width) ||
+	    (vpitch < ch->vpifparams.std_info.height))
+		goto invalid_pitch_exit;
+
+	/* Check for 8 byte alignment */
+	if (!ISALIGNED(hpitch)) {
+		vpif_err("invalid pitch alignment\n");
+		return -EINVAL;
+	}
+	pixfmt->width = common->fmt.fmt.pix.width;
+	pixfmt->height = common->fmt.fmt.pix.height;
+
+	return 0;
+
+invalid_fmt_exit:
+	vpif_err("invalid field format\n");
+	return -EINVAL;
+
+invalid_pitch_exit:
+	vpif_err("invalid pitch\n");
+	return -EINVAL;
+}
+
+static void vpif_config_addr(struct channel_obj *ch, int muxmode)
+{
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+
+	if (VPIF_CHANNEL3_VIDEO == ch->channel_id) {
+		common->set_addr = ch3_set_videobuf_addr;
+	} else {
+		if (2 == muxmode)
+			common->set_addr = ch2_set_videobuf_addr_yc_nmux;
+		else
+			common->set_addr = ch2_set_videobuf_addr;
+	}
+}
+
+/*
+ * vpif_mmap: It is used to map kernel space buffers into user spaces
+ */
+static int vpif_mmap(struct file *filep, struct vm_area_struct *vma)
+{
+	struct vpif_fh *fh = filep->private_data;
+	struct common_obj *common = &fh->channel->common[VPIF_VIDEO_INDEX];
+
+	return videobuf_mmap_mapper(&common->buffer_queue, vma);
+}
+
+/*
+ * vpif_poll: It is used for select/poll system call
+ */
+static unsigned int vpif_poll(struct file *filep, poll_table *wait)
+{
+	struct vpif_fh *fh = filep->private_data;
+	struct channel_obj *ch = fh->channel;
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+
+	if (common->started)
+		return videobuf_poll_stream(filep, &common->buffer_queue, wait);
+
+	return 0;
+}
+
+/*
+ * vpif_open: It creates object of file handle structure and stores it in
+ * private_data member of filepointer
+ */
+static int vpif_open(struct file *filep)
+{
+	struct video_device *vdev = video_devdata(filep);
+	struct channel_obj *ch = NULL;
+	struct vpif_fh *fh = NULL;
+
+	ch = video_get_drvdata(vdev);
+	/* Allocate memory for the file handle object */
+	fh = kmalloc(sizeof(struct vpif_fh), GFP_KERNEL);
+	if (fh == NULL) {
+		vpif_err("unable to allocate memory for file handle object\n");
+		return -ENOMEM;
+	}
+
+	/* store pointer to fh in private_data member of filep */
+	filep->private_data = fh;
+	fh->channel = ch;
+	fh->initialized = 0;
+	if (!ch->initialized) {
+		fh->initialized = 1;
+		ch->initialized = 1;
+		memset(&ch->vpifparams, 0, sizeof(ch->vpifparams));
+	}
+
+	/* Increment channel usrs counter */
+	atomic_inc(&ch->usrs);
+	/* Set io_allowed[VPIF_VIDEO_INDEX] member to false */
+	fh->io_allowed[VPIF_VIDEO_INDEX] = 0;
+	/* Initialize priority of this instance to default priority */
+	fh->prio = V4L2_PRIORITY_UNSET;
+	v4l2_prio_open(&ch->prio, &fh->prio);
+
+	return 0;
+}
+
+/*
+ * vpif_release: This function deletes buffer queue, frees the buffers and
+ * the vpif file handle
+ */
+static int vpif_release(struct file *filep)
+{
+	struct vpif_fh *fh = filep->private_data;
+	struct channel_obj *ch = fh->channel;
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+
+	mutex_lock_interruptible(&common->lock);
+	/* if this instance is doing IO */
+	if (fh->io_allowed[VPIF_VIDEO_INDEX]) {
+		/* Reset io_usrs member of channel object */
+		common->io_usrs = 0;
+		/* Disable channel */
+		if (VPIF_CHANNEL2_VIDEO == ch->channel_id) {
+			enable_channel2(0);
+			channel2_intr_enable(0);
+		}
+		if ((VPIF_CHANNEL3_VIDEO == ch->channel_id) ||
+		    (2 == common->started)) {
+			enable_channel3(0);
+			channel3_intr_enable(0);
+		}
+		common->started = 0;
+		/* Free buffers allocated */
+		videobuf_queue_cancel(&common->buffer_queue);
+		videobuf_mmap_free(&common->buffer_queue);
+		common->numbuffers =
+		    config_params.numbuffers[ch->channel_id];
+	}
+
+	mutex_unlock(&common->lock);
+
+	/* Decrement channel usrs counter */
+	atomic_dec(&ch->usrs);
+	/* If this file handle has initialize encoder device, reset it */
+	if (fh->initialized)
+		ch->initialized = 0;
+
+	/* Close the priority */
+	v4l2_prio_close(&ch->prio, &fh->prio);
+	filep->private_data = NULL;
+	fh->initialized = 0;
+	kfree(fh);
+
+	return 0;
+}
+
+/* functions implementing ioctls */
+
+static int vpif_querycap(struct file *file, void  *priv,
+				struct v4l2_capability *cap)
+{
+	struct vpif_config *config = vpif_dev->platform_data;
+
+	cap->version = VPIF_DISPLAY_VERSION_CODE;
+	cap->capabilities = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING;
+	strlcpy(cap->driver, "vpif display", sizeof(cap->driver));
+	strlcpy(cap->bus_info, "Platform", sizeof(cap->bus_info));
+	strlcpy(cap->card, config->card_name, sizeof(cap->card));
+
+	return 0;
+}
+
+static int vpif_enum_fmt_vid_out(struct file *file, void  *priv,
+					struct v4l2_fmtdesc *fmt)
+{
+	if (fmt->index != 0) {
+		vpif_err("Invalid format index\n");
+		return -EINVAL;
+	}
+
+	/* Fill in the information about format */
+	fmt->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
+	strcpy(fmt->description, "YCbCr4:2:2 YC Planar");
+	fmt->pixelformat = V4L2_PIX_FMT_YUV422P;
+
+	return 0;
+}
+
+static int vpif_g_fmt_vid_out(struct file *file, void *priv,
+				struct v4l2_format *fmt)
+{
+	struct vpif_fh *fh = priv;
+	struct channel_obj *ch = fh->channel;
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+
+	/* Check the validity of the buffer type */
+	if (common->fmt.type != fmt->type)
+		return -EINVAL;
+
+	/* Fill in the information about format */
+	mutex_lock_interruptible(&common->lock);
+	if (vpif_get_std_info(ch)) {
+		vpif_err("Error getting the standard info\n");
+		return -EINVAL;
+	}
+
+	*fmt = common->fmt;
+	mutex_unlock(&common->lock);
+	return 0;
+}
+
+static int vpif_s_fmt_vid_out(struct file *file, void *priv,
+				struct v4l2_format *fmt)
+{
+	struct vpif_fh *fh = priv;
+	struct v4l2_pix_format *pixfmt;
+	struct channel_obj *ch = fh->channel;
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+	int ret = 0;
+
+	if ((VPIF_CHANNEL2_VIDEO == ch->channel_id)
+	    || (VPIF_CHANNEL3_VIDEO == ch->channel_id)) {
+		if (!fh->initialized) {
+			vpif_dbg(1, debug, "Channel Busy\n");
+			return -EBUSY;
+		}
+
+		/* Check for the priority */
+		ret = v4l2_prio_check(&ch->prio, &fh->prio);
+		if (0 != ret)
+			return ret;
+		fh->initialized = 1;
+	}
+
+	if (common->started) {
+		vpif_dbg(1, debug, "Streaming in progress\n");
+		return -EBUSY;
+	}
+
+	pixfmt = &fmt->fmt.pix;
+	/* Check for valid field format */
+	ret = vpif_check_format(ch, pixfmt);
+	if (ret)
+		return ret;
+
+	/* store the pix format in the channel object */
+	common->fmt.fmt.pix = *pixfmt;
+	/* store the format in the channel object */
+	mutex_lock_interruptible(&common->lock);
+	common->fmt = *fmt;
+	mutex_unlock(&common->lock);
+
+	return 0;
+}
+
+static int vpif_try_fmt_vid_out(struct file *file, void *priv,
+				struct v4l2_format *fmt)
+{
+	struct vpif_fh *fh = priv;
+	struct channel_obj *ch = fh->channel;
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+	struct v4l2_pix_format *pixfmt = &fmt->fmt.pix;
+	int ret = 0;
+
+	ret = vpif_check_format(ch, pixfmt);
+	if (ret) {
+		*pixfmt = common->fmt.fmt.pix;
+		pixfmt->sizeimage = pixfmt->width * pixfmt->height * 2;
+	}
+
+	return ret;
+}
+
+static int vpif_reqbufs(struct file *file, void *priv,
+			struct v4l2_requestbuffers *reqbuf)
+{
+	struct vpif_fh *fh = priv;
+	struct channel_obj *ch = fh->channel;
+	struct common_obj *common;
+	enum v4l2_field field;
+	u8 index = 0;
+	int ret = 0;
+
+	/* This file handle has not initialized the channel,
+	   It is not allowed to do settings */
+	if ((VPIF_CHANNEL2_VIDEO == ch->channel_id)
+	    || (VPIF_CHANNEL3_VIDEO == ch->channel_id)) {
+		if (!fh->initialized) {
+			vpif_err("Channel Busy\n");
+			return -EBUSY;
+		}
+	}
+
+	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != reqbuf->type)
+		return -EINVAL;
+
+	index = VPIF_VIDEO_INDEX;
+
+	common = &ch->common[index];
+	mutex_lock_interruptible(&common->lock);
+	if (common->fmt.type != reqbuf->type) {
+		ret = -EINVAL;
+		goto reqbuf_exit;
+	}
+
+	if (0 != common->io_usrs) {
+		ret = -EBUSY;
+		goto reqbuf_exit;
+	}
+
+	if (reqbuf->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) {
+		if (common->fmt.fmt.pix.field == V4L2_FIELD_ANY)
+			field = V4L2_FIELD_INTERLACED;
+		else
+			field = common->fmt.fmt.pix.field;
+	} else {
+		field = V4L2_VBI_INTERLACED;
+	}
+
+	/* Initialize videobuf queue as per the buffer type */
+	videobuf_queue_dma_contig_init(&common->buffer_queue,
+					    &video_qops, NULL,
+					    &common->irqlock,
+					    reqbuf->type, field,
+					    sizeof(struct videobuf_buffer), fh);
+
+	/* Set io allowed member of file handle to TRUE */
+	fh->io_allowed[index] = 1;
+	/* Increment io usrs member of channel object to 1 */
+	common->io_usrs = 1;
+	/* Store type of memory requested in channel object */
+	common->memory = reqbuf->memory;
+	INIT_LIST_HEAD(&common->dma_queue);
+
+	/* Allocate buffers */
+	ret = videobuf_reqbufs(&common->buffer_queue, reqbuf);
+
+reqbuf_exit:
+	mutex_unlock(&common->lock);
+	return ret;
+}
+
+static int vpif_querybuf(struct file *file, void *priv,
+				struct v4l2_buffer *tbuf)
+{
+	struct vpif_fh *fh = priv;
+	struct channel_obj *ch = fh->channel;
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+
+	if (common->fmt.type != tbuf->type)
+		return -EINVAL;
+
+	return videobuf_querybuf(&common->buffer_queue, tbuf);
+}
+
+static int vpif_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf)
+{
+
+	struct vpif_fh *fh = priv;
+	struct channel_obj *ch = fh->channel;
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+	struct v4l2_buffer tbuf = *buf;
+	struct videobuf_buffer *buf1;
+	unsigned long addr = 0;
+	unsigned long flags;
+	int ret = 0;
+
+	if (common->fmt.type != tbuf.type)
+		return -EINVAL;
+
+	if (!fh->io_allowed[VPIF_VIDEO_INDEX]) {
+		vpif_err("fh->io_allowed\n");
+		return -EACCES;
+	}
+
+	if (!(list_empty(&common->dma_queue)) ||
+	    (common->cur_frm != common->next_frm) ||
+	    !(common->started) ||
+	    (common->started && (0 == ch->field_id)))
+		return videobuf_qbuf(&common->buffer_queue, buf);
+
+	/* bufferqueue is empty store buffer address in VPIF registers */
+	mutex_lock(&common->buffer_queue.vb_lock);
+	buf1 = common->buffer_queue.bufs[tbuf.index];
+	if (buf1->memory != tbuf.memory) {
+		vpif_err("invalid buffer type\n");
+		goto qbuf_exit;
+	}
+
+	if ((buf1->state == VIDEOBUF_QUEUED) ||
+	    (buf1->state == VIDEOBUF_ACTIVE)) {
+		vpif_err("invalid state\n");
+		goto qbuf_exit;
+	}
+
+	switch (buf1->memory) {
+	case V4L2_MEMORY_MMAP:
+		if (buf1->baddr == 0)
+			goto qbuf_exit;
+		break;
+
+	case V4L2_MEMORY_USERPTR:
+		if (tbuf.length < buf1->bsize)
+			goto qbuf_exit;
+
+		if ((VIDEOBUF_NEEDS_INIT != buf1->state)
+			    && (buf1->baddr != tbuf.m.userptr))
+			vpif_buffer_release(&common->buffer_queue, buf1);
+			buf1->baddr = tbuf.m.userptr;
+		break;
+
+	default:
+		goto qbuf_exit;
+	}
+
+	local_irq_save(flags);
+	ret = vpif_buffer_prepare(&common->buffer_queue, buf1,
+					common->buffer_queue.field);
+	if (ret < 0) {
+		local_irq_restore(flags);
+		goto qbuf_exit;
+	}
+
+	buf1->state = VIDEOBUF_ACTIVE;
+	addr = buf1->boff;
+	common->next_frm = buf1;
+	if (tbuf.type != V4L2_BUF_TYPE_SLICED_VBI_OUTPUT) {
+		common->set_addr((addr + common->ytop_off),
+				 (addr + common->ybtm_off),
+				 (addr + common->ctop_off),
+				 (addr + common->cbtm_off));
+	}
+
+	local_irq_restore(flags);
+	list_add_tail(&buf1->stream, &common->buffer_queue.stream);
+	mutex_unlock(&common->buffer_queue.vb_lock);
+	return 0;
+
+qbuf_exit:
+	mutex_unlock(&common->buffer_queue.vb_lock);
+	return -EINVAL;
+}
+
+static int vpif_s_std(struct file *file, void *priv, v4l2_std_id *std_id)
+{
+	struct vpif_fh *fh = priv;
+	struct channel_obj *ch = fh->channel;
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+	int ret = 0;
+
+	if (!(*std_id & DM646X_V4L2_STD))
+		return -EINVAL;
+
+	if (common->started) {
+		vpif_err("streaming in progress\n");
+		return -EBUSY;
+	}
+
+	/* Call encoder subdevice function to set the standard */
+	mutex_lock_interruptible(&common->lock);
+
+	ch->video.stdid = *std_id;
+	/* Get the information about the standard */
+	if (vpif_get_std_info(ch)) {
+		vpif_err("Error getting the standard info\n");
+		return -EINVAL;
+	}
+
+	if ((ch->vpifparams.std_info.width *
+		ch->vpifparams.std_info.height * 2) >
+		config_params.channel_bufsize[ch->channel_id]) {
+		vpif_err("invalid std for this size\n");
+		ret = -EINVAL;
+		goto s_std_exit;
+	}
+
+	common->fmt.fmt.pix.bytesperline = common->fmt.fmt.pix.width;
+	/* Configure the default format information */
+	vpif_config_format(ch);
+
+	ret = v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 1, video,
+						s_std_output, *std_id);
+	if (ret < 0) {
+		vpif_err("Failed to set output standard\n");
+		goto s_std_exit;
+	}
+
+	ret = v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 1, core,
+							s_std, *std_id);
+	if (ret < 0)
+		vpif_err("Failed to set standard for sub devices\n");
+
+s_std_exit:
+	mutex_unlock(&common->lock);
+	return ret;
+}
+
+static int vpif_g_std(struct file *file, void *priv, v4l2_std_id *std)
+{
+	struct vpif_fh *fh = priv;
+	struct channel_obj *ch = fh->channel;
+
+	*std = ch->video.stdid;
+	return 0;
+}
+
+static int vpif_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p)
+{
+	struct vpif_fh *fh = priv;
+	struct channel_obj *ch = fh->channel;
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+
+	return videobuf_dqbuf(&common->buffer_queue, p,
+					(file->f_flags & O_NONBLOCK));
+}
+
+static int vpif_streamon(struct file *file, void *priv,
+				enum v4l2_buf_type buftype)
+{
+	struct vpif_fh *fh = priv;
+	struct channel_obj *ch = fh->channel;
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+	struct channel_obj *oth_ch = vpif_obj.dev[!ch->channel_id];
+	struct vpif_params *vpif = &ch->vpifparams;
+	struct vpif_config *vpif_config_data =
+					vpif_dev->platform_data;
+	unsigned long addr = 0;
+	int ret = 0;
+
+	if (buftype != V4L2_BUF_TYPE_VIDEO_OUTPUT) {
+		vpif_err("buffer type not supported\n");
+		return -EINVAL;
+	}
+
+	if (!fh->io_allowed[VPIF_VIDEO_INDEX]) {
+		vpif_err("fh->io_allowed\n");
+		return -EACCES;
+	}
+
+	/* If Streaming is already started, return error */
+	if (common->started) {
+		vpif_err("channel->started\n");
+		return -EBUSY;
+	}
+
+	if ((ch->channel_id == VPIF_CHANNEL2_VIDEO
+		&& oth_ch->common[VPIF_VIDEO_INDEX].started &&
+		ch->vpifparams.std_info.ycmux_mode == 0)
+		|| ((ch->channel_id == VPIF_CHANNEL3_VIDEO)
+		&& (2 == oth_ch->common[VPIF_VIDEO_INDEX].started))) {
+		vpif_err("other channel is using\n");
+		return -EBUSY;
+	}
+
+	ret = vpif_check_format(ch, &common->fmt.fmt.pix);
+	if (ret < 0)
+		return ret;
+
+	/* Call videobuf_streamon to start streaming  in videobuf */
+	ret = videobuf_streamon(&common->buffer_queue);
+	if (ret < 0) {
+		vpif_err("videobuf_streamon\n");
+		return ret;
+	}
+
+	mutex_lock_interruptible(&common->lock);
+	/* If buffer queue is empty, return error */
+	if (list_empty(&common->dma_queue)) {
+		vpif_err("buffer queue is empty\n");
+		ret = -EIO;
+		goto streamon_exit;
+	}
+
+	/* Get the next frame from the buffer queue */
+	common->next_frm = common->cur_frm =
+			    list_entry(common->dma_queue.next,
+				       struct videobuf_buffer, queue);
+
+	list_del(&common->cur_frm->queue);
+	/* Mark state of the current frame to active */
+	common->cur_frm->state = VIDEOBUF_ACTIVE;
+
+	/* Initialize field_id and started member */
+	ch->field_id = 0;
+	common->started = 1;
+	if (buftype == V4L2_BUF_TYPE_VIDEO_OUTPUT) {
+		addr = common->cur_frm->boff;
+		/* Calculate the offset for Y and C data  in the buffer */
+		vpif_calculate_offsets(ch);
+
+		if ((ch->vpifparams.std_info.frm_fmt &&
+			((common->fmt.fmt.pix.field != V4L2_FIELD_NONE)
+			&& (common->fmt.fmt.pix.field != V4L2_FIELD_ANY)))
+			|| (!ch->vpifparams.std_info.frm_fmt
+			&& (common->fmt.fmt.pix.field == V4L2_FIELD_NONE))) {
+			vpif_err("conflict in field format and std format\n");
+			ret = -EINVAL;
+			goto streamon_exit;
+		}
+
+		/* clock settings */
+		ret =
+		 vpif_config_data->set_clock(ch->vpifparams.std_info.ycmux_mode,
+						ch->vpifparams.std_info.hd_sd);
+		if (ret < 0) {
+			vpif_err("can't set clock\n");
+			goto streamon_exit;
+		}
+
+		/* set the parameters and addresses */
+		ret = vpif_set_video_params(vpif, ch->channel_id + 2);
+		if (ret < 0)
+			goto streamon_exit;
+
+		common->started = ret;
+		vpif_config_addr(ch, ret);
+		common->set_addr((addr + common->ytop_off),
+				 (addr + common->ybtm_off),
+				 (addr + common->ctop_off),
+				 (addr + common->cbtm_off));
+
+		/* Set interrupt for both the fields in VPIF
+		   Register enable channel in VPIF register */
+		if (VPIF_CHANNEL2_VIDEO == ch->channel_id) {
+			channel2_intr_assert();
+			channel2_intr_enable(1);
+			enable_channel2(1);
+		}
+
+		if ((VPIF_CHANNEL3_VIDEO == ch->channel_id)
+			|| (common->started == 2)) {
+			channel3_intr_assert();
+			channel3_intr_enable(1);
+			enable_channel3(1);
+		}
+		channel_first_int[VPIF_VIDEO_INDEX][ch->channel_id] = 1;
+	}
+
+streamon_exit:
+	mutex_unlock(&common->lock);
+	return ret;
+}
+
+static int vpif_streamoff(struct file *file, void *priv,
+				enum v4l2_buf_type buftype)
+{
+	struct vpif_fh *fh = priv;
+	struct channel_obj *ch = fh->channel;
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+
+	if (buftype != V4L2_BUF_TYPE_VIDEO_OUTPUT) {
+		vpif_err("buffer type not supported\n");
+		return -EINVAL;
+	}
+
+	if (!fh->io_allowed[VPIF_VIDEO_INDEX]) {
+		vpif_err("fh->io_allowed\n");
+		return -EACCES;
+	}
+
+	if (!common->started) {
+		vpif_err("channel->started\n");
+		return -EINVAL;
+	}
+
+	mutex_lock_interruptible(&common->lock);
+	if (buftype == V4L2_BUF_TYPE_VIDEO_OUTPUT) {
+		/* disable channel */
+		if (VPIF_CHANNEL2_VIDEO == ch->channel_id) {
+			enable_channel2(0);
+			channel2_intr_enable(0);
+		}
+		if ((VPIF_CHANNEL3_VIDEO == ch->channel_id) ||
+					(2 == common->started)) {
+			enable_channel3(0);
+			channel3_intr_enable(0);
+		}
+	}
+
+	common->started = 0;
+	mutex_unlock(&common->lock);
+
+	return videobuf_streamoff(&common->buffer_queue);
+}
+
+static int vpif_cropcap(struct file *file, void *priv,
+			struct v4l2_cropcap *crop)
+{
+	struct vpif_fh *fh = priv;
+	struct channel_obj *ch = fh->channel;
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != crop->type)
+		return -EINVAL;
+
+	crop->bounds.left = crop->bounds.top = 0;
+	crop->defrect.left = crop->defrect.top = 0;
+	crop->defrect.height = crop->bounds.height = common->height;
+	crop->defrect.width = crop->bounds.width = common->width;
+
+	return 0;
+}
+
+static int vpif_enum_output(struct file *file, void *fh,
+				struct v4l2_output *output)
+{
+
+	struct vpif_config *config = vpif_dev->platform_data;
+
+	if (output->index >= config->output_count) {
+		vpif_dbg(1, debug, "Invalid output index\n");
+		return -EINVAL;
+	}
+
+	strcpy(output->name, config->output[output->index]);
+	output->type = V4L2_OUTPUT_TYPE_ANALOG;
+	output->std = DM646X_V4L2_STD;
+
+	return 0;
+}
+
+static int vpif_s_output(struct file *file, void *priv, unsigned int i)
+{
+	struct vpif_fh *fh = priv;
+	struct channel_obj *ch = fh->channel;
+	struct video_obj *vid_ch = &ch->video;
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+	int ret = 0;
+
+	mutex_lock_interruptible(&common->lock);
+	if (common->started) {
+		vpif_err("Streaming in progress\n");
+		ret = -EBUSY;
+		goto s_output_exit;
+	}
+
+	ret = v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 1, video,
+							s_routing, 0, i, 0);
+
+	if (ret < 0)
+		vpif_err("Failed to set output standard\n");
+
+	vid_ch->output_id = i;
+
+s_output_exit:
+	mutex_unlock(&common->lock);
+	return ret;
+}
+
+static int vpif_g_output(struct file *file, void *priv, unsigned int *i)
+{
+	struct vpif_fh *fh = priv;
+	struct channel_obj *ch = fh->channel;
+	struct video_obj *vid_ch = &ch->video;
+
+	*i = vid_ch->output_id;
+
+	return 0;
+}
+
+static int vpif_g_priority(struct file *file, void *priv, enum v4l2_priority *p)
+{
+	struct vpif_fh *fh = priv;
+	struct channel_obj *ch = fh->channel;
+
+	*p = v4l2_prio_max(&ch->prio);
+
+	return 0;
+}
+
+static int vpif_s_priority(struct file *file, void *priv, enum v4l2_priority p)
+{
+	struct vpif_fh *fh = priv;
+	struct channel_obj *ch = fh->channel;
+
+	return v4l2_prio_change(&ch->prio, &fh->prio, p);
+}
+
+/* vpif display ioctl operations */
+static const struct v4l2_ioctl_ops vpif_ioctl_ops = {
+	.vidioc_querycap        	= vpif_querycap,
+	.vidioc_g_priority		= vpif_g_priority,
+	.vidioc_s_priority		= vpif_s_priority,
+	.vidioc_enum_fmt_vid_out	= vpif_enum_fmt_vid_out,
+	.vidioc_g_fmt_vid_out  		= vpif_g_fmt_vid_out,
+	.vidioc_s_fmt_vid_out   	= vpif_s_fmt_vid_out,
+	.vidioc_try_fmt_vid_out 	= vpif_try_fmt_vid_out,
+	.vidioc_reqbufs         	= vpif_reqbufs,
+	.vidioc_querybuf        	= vpif_querybuf,
+	.vidioc_qbuf            	= vpif_qbuf,
+	.vidioc_dqbuf           	= vpif_dqbuf,
+	.vidioc_streamon        	= vpif_streamon,
+	.vidioc_streamoff       	= vpif_streamoff,
+	.vidioc_s_std           	= vpif_s_std,
+	.vidioc_g_std			= vpif_g_std,
+	.vidioc_enum_output		= vpif_enum_output,
+	.vidioc_s_output		= vpif_s_output,
+	.vidioc_g_output		= vpif_g_output,
+	.vidioc_cropcap         	= vpif_cropcap,
+};
+
+static const struct v4l2_file_operations vpif_fops = {
+	.owner		= THIS_MODULE,
+	.open		= vpif_open,
+	.release	= vpif_release,
+	.ioctl		= video_ioctl2,
+	.mmap		= vpif_mmap,
+	.poll		= vpif_poll
+};
+
+static struct video_device vpif_video_template = {
+	.name		= "vpif",
+	.fops		= &vpif_fops,
+	.minor		= -1,
+	.ioctl_ops	= &vpif_ioctl_ops,
+	.tvnorms	= DM646X_V4L2_STD,
+	.current_norm	= V4L2_STD_625_50,
+
+};
+
+/*Configure the channels, buffer sizei, request irq */
+static int initialize_vpif(void)
+{
+	int free_channel_objects_index;
+	int free_buffer_channel_index;
+	int free_buffer_index;
+	int err = 0, i, j;
+
+	/* Default number of buffers should be 3 */
+	if ((ch2_numbuffers > 0) &&
+	    (ch2_numbuffers < config_params.min_numbuffers))
+		ch2_numbuffers = config_params.min_numbuffers;
+	if ((ch3_numbuffers > 0) &&
+	    (ch3_numbuffers < config_params.min_numbuffers))
+		ch3_numbuffers = config_params.min_numbuffers;
+
+	/* Set buffer size to min buffers size if invalid buffer size is
+	 * given */
+	if (ch2_bufsize < config_params.min_bufsize[VPIF_CHANNEL2_VIDEO])
+		ch2_bufsize =
+		    config_params.min_bufsize[VPIF_CHANNEL2_VIDEO];
+	if (ch3_bufsize < config_params.min_bufsize[VPIF_CHANNEL3_VIDEO])
+		ch3_bufsize =
+		    config_params.min_bufsize[VPIF_CHANNEL3_VIDEO];
+
+	config_params.numbuffers[VPIF_CHANNEL2_VIDEO] = ch2_numbuffers;
+
+	if (ch2_numbuffers) {
+		config_params.channel_bufsize[VPIF_CHANNEL2_VIDEO] =
+							ch2_bufsize;
+	}
+	config_params.numbuffers[VPIF_CHANNEL3_VIDEO] = ch3_numbuffers;
+
+	if (ch3_numbuffers) {
+		config_params.channel_bufsize[VPIF_CHANNEL3_VIDEO] =
+							ch3_bufsize;
+	}
+
+	/* Allocate memory for six channel objects */
+	for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++) {
+		vpif_obj.dev[i] =
+		    kmalloc(sizeof(struct channel_obj), GFP_KERNEL);
+		/* If memory allocation fails, return error */
+		if (!vpif_obj.dev[i]) {
+			free_channel_objects_index = i;
+			err = -ENOMEM;
+			goto vpif_init_free_channel_objects;
+		}
+	}
+
+	free_channel_objects_index = VPIF_DISPLAY_MAX_DEVICES;
+	free_buffer_channel_index = VPIF_DISPLAY_NUM_CHANNELS;
+	free_buffer_index = config_params.numbuffers[i - 1];
+
+	return 0;
+
+vpif_init_free_channel_objects:
+	for (j = 0; j < free_channel_objects_index; j++)
+		kfree(vpif_obj.dev[j]);
+	return err;
+}
+
+/*
+ * vpif_probe: This function creates device entries by register itself to the
+ * V4L2 driver and initializes fields of each channel objects
+ */
+static __init int vpif_probe(struct platform_device *pdev)
+{
+	const struct subdev_info *subdevdata;
+	int i, j = 0, k, q, m, err = 0;
+	struct i2c_adapter *i2c_adap;
+	struct vpif_config *config;
+	struct common_obj *common;
+	struct channel_obj *ch;
+	struct video_device *vfd;
+	struct resource *res;
+	int subdev_count;
+
+	vpif_dev = &pdev->dev;
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		v4l2_err(vpif_dev->driver,
+				"Error getting platform resource\n");
+		return -ENOENT;
+	}
+
+	if (!request_mem_region(res->start, res->end - res->start + 1,
+						vpif_dev->driver->name)) {
+		v4l2_err(vpif_dev->driver, "VPIF: failed request_mem_region\n");
+		return -ENXIO;
+	}
+
+	vpif_base = ioremap_nocache(res->start, res->end - res->start + 1);
+	if (!vpif_base) {
+		v4l2_err(vpif_dev->driver, "Unable to ioremap VPIF reg\n");
+		err = -ENXIO;
+		goto resource_exit;
+	}
+
+	vpif_base_addr_init(vpif_base);
+
+	initialize_vpif();
+
+	err = v4l2_device_register(vpif_dev, &vpif_obj.v4l2_dev);
+	if (err) {
+		v4l2_err(vpif_dev->driver, "Error registering v4l2 device\n");
+		return err;
+	}
+
+	k = 0;
+	while ((res = platform_get_resource(pdev, IORESOURCE_IRQ, k))) {
+		for (i = res->start; i <= res->end; i++) {
+			if (request_irq(i, vpif_channel_isr, IRQF_DISABLED,
+					"DM646x_Display",
+				(void *)(&vpif_obj.dev[k]->channel_id))) {
+				err = -EBUSY;
+				goto vpif_int_err;
+			}
+		}
+		k++;
+	}
+
+	for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++) {
+
+		/* Get the pointer to the channel object */
+		ch = vpif_obj.dev[i];
+
+		/* Allocate memory for video device */
+		vfd = video_device_alloc();
+		if (vfd == NULL) {
+			for (j = 0; j < i; j++) {
+				ch = vpif_obj.dev[j];
+				video_device_release(ch->video_dev);
+			}
+			err = -ENOMEM;
+			goto video_dev_alloc_exit;
+		}
+
+		/* Initialize field of video device */
+		*vfd = vpif_video_template;
+		vfd->v4l2_dev = &vpif_obj.v4l2_dev;
+		vfd->release = video_device_release;
+		snprintf(vfd->name, sizeof(vfd->name),
+			 "DM646x_VPIFDisplay_DRIVER_V%d.%d.%d",
+			 (VPIF_DISPLAY_VERSION_CODE >> 16) & 0xff,
+			 (VPIF_DISPLAY_VERSION_CODE >> 8) & 0xff,
+			 (VPIF_DISPLAY_VERSION_CODE) & 0xff);
+
+		/* Set video_dev to the video device */
+		ch->video_dev = vfd;
+	}
+
+	for (j = 0; j < VPIF_DISPLAY_MAX_DEVICES; j++) {
+		ch = vpif_obj.dev[j];
+		/* Initialize field of the channel objects */
+		atomic_set(&ch->usrs, 0);
+		for (k = 0; k < VPIF_NUMOBJECTS; k++) {
+			ch->common[k].numbuffers = 0;
+			common = &ch->common[k];
+			common->io_usrs = 0;
+			common->started = 0;
+			spin_lock_init(&common->irqlock);
+			mutex_init(&common->lock);
+			common->numbuffers = 0;
+			common->set_addr = NULL;
+			common->ytop_off = common->ybtm_off = 0;
+			common->ctop_off = common->cbtm_off = 0;
+			common->cur_frm = common->next_frm = NULL;
+			memset(&common->fmt, 0, sizeof(common->fmt));
+			common->numbuffers = config_params.numbuffers[k];
+
+		}
+		ch->initialized = 0;
+		ch->channel_id = j;
+		if (j < 2)
+			ch->common[VPIF_VIDEO_INDEX].numbuffers =
+			    config_params.numbuffers[ch->channel_id];
+		else
+			ch->common[VPIF_VIDEO_INDEX].numbuffers = 0;
+
+		memset(&ch->vpifparams, 0, sizeof(ch->vpifparams));
+
+		/* Initialize prio member of channel object */
+		v4l2_prio_init(&ch->prio);
+		ch->common[VPIF_VIDEO_INDEX].fmt.type =
+						V4L2_BUF_TYPE_VIDEO_OUTPUT;
+
+		/* register video device */
+		vpif_dbg(1, debug, "channel=%x,channel->video_dev=%x\n",
+				(int)ch, (int)&ch->video_dev);
+
+		err = video_register_device(ch->video_dev,
+					  VFL_TYPE_GRABBER, (j ? 3 : 2));
+		if (err < 0)
+			goto probe_out;
+
+		video_set_drvdata(ch->video_dev, ch);
+	}
+
+	i2c_adap = i2c_get_adapter(1);
+	config = pdev->dev.platform_data;
+	subdev_count = config->subdev_count;
+	subdevdata = config->subdevinfo;
+	vpif_obj.sd = kmalloc(sizeof(struct v4l2_subdev *) * subdev_count,
+								GFP_KERNEL);
+	if (vpif_obj.sd == NULL) {
+		vpif_err("unable to allocate memory for subdevice pointers\n");
+		err = -ENOMEM;
+		goto probe_out;
+	}
+
+	for (i = 0; i < subdev_count; i++) {
+		vpif_obj.sd[i] = v4l2_i2c_new_probed_subdev(&vpif_obj.v4l2_dev,
+						i2c_adap, subdevdata[i].name,
+						subdevdata[i].name,
+						&subdevdata[i].addr);
+		if (!vpif_obj.sd[i]) {
+			vpif_err("Error registering v4l2 subdevice\n");
+			goto probe_subdev_out;
+		}
+
+		if (vpif_obj.sd[i])
+			vpif_obj.sd[i]->grp_id = 1 << i;
+	}
+
+	return 0;
+
+probe_subdev_out:
+	kfree(vpif_obj.sd);
+probe_out:
+	for (k = 0; k < j; k++) {
+		ch = vpif_obj.dev[k];
+		video_unregister_device(ch->video_dev);
+		video_device_release(ch->video_dev);
+		ch->video_dev = NULL;
+	}
+vpif_int_err:
+	v4l2_device_unregister(&vpif_obj.v4l2_dev);
+	vpif_err("VPIF IRQ request failed\n");
+	for (q = k; k >= 0; k--) {
+		for (m = i; m >= res->start; m--)
+			free_irq(m, (void *)(&vpif_obj.dev[k]->channel_id));
+		res = platform_get_resource(pdev, IORESOURCE_IRQ, k-1);
+		m = res->end;
+	}
+video_dev_alloc_exit:
+	iounmap(vpif_base);
+resource_exit:
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, res->end - res->start + 1);
+
+	return err;
+}
+
+/*
+ * vpif_remove: It un-register channels from V4L2 driver
+ */
+static int vpif_remove(struct platform_device *device)
+{
+	struct channel_obj *ch;
+	int i;
+
+	v4l2_device_unregister(&vpif_obj.v4l2_dev);
+
+	/* un-register device */
+	for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++) {
+		/* Get the pointer to the channel object */
+		ch = vpif_obj.dev[i];
+		/* Unregister video device */
+		video_unregister_device(ch->video_dev);
+
+		ch->video_dev = NULL;
+	}
+
+	return 0;
+}
+
+static struct platform_driver vpif_driver = {
+	.driver	= {
+			.name	= "vpif_display",
+			.owner	= THIS_MODULE,
+	},
+	.probe	= vpif_probe,
+	.remove	= vpif_remove,
+};
+
+static __init int vpif_init(void)
+{
+	return platform_driver_register(&vpif_driver);
+}
+
+/*
+ * vpif_cleanup: This function un-registers device and driver to the kernel,
+ * frees requested irq handler and de-allocates memory allocated for channel
+ * objects.
+ */
+static void vpif_cleanup(void)
+{
+	struct platform_device *pdev;
+	struct resource *res;
+	int irq_num;
+	int i = 0;
+
+	pdev = container_of(vpif_dev, struct platform_device, dev);
+
+	while ((res = platform_get_resource(pdev, IORESOURCE_IRQ, i))) {
+		for (irq_num = res->start; irq_num <= res->end; irq_num++)
+			free_irq(irq_num,
+				 (void *)(&vpif_obj.dev[i]->channel_id));
+		i++;
+	}
+
+	iounmap(vpif_base);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, res->end - res->start + 1);
+	platform_driver_unregister(&vpif_driver);
+	kfree(vpif_obj.sd);
+	for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++)
+		kfree(vpif_obj.dev[i]);
+}
+
+module_init(vpif_init);
+module_exit(vpif_cleanup);
diff --git a/drivers/media/video/davinci/vpif_display.h b/drivers/media/video/davinci/vpif_display.h
new file mode 100644
index 00000000000..a2a7cd166bb
--- /dev/null
+++ b/drivers/media/video/davinci/vpif_display.h
@@ -0,0 +1,175 @@
+/*
+ * DM646x display header file
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed .as is. WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef DAVINCIHD_DISPLAY_H
+#define DAVINCIHD_DISPLAY_H
+
+/* Header files */
+#include <linux/videodev2.h>
+#include <linux/version.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-device.h>
+#include <media/videobuf-core.h>
+#include <media/videobuf-dma-contig.h>
+
+#include "vpif.h"
+
+/* Macros */
+#define VPIF_MAJOR_RELEASE	(0)
+#define VPIF_MINOR_RELEASE	(0)
+#define VPIF_BUILD		(1)
+
+#define VPIF_DISPLAY_VERSION_CODE \
+	((VPIF_MAJOR_RELEASE << 16) | (VPIF_MINOR_RELEASE << 8) | VPIF_BUILD)
+
+#define VPIF_VALID_FIELD(field) \
+	(((V4L2_FIELD_ANY == field) || (V4L2_FIELD_NONE == field)) || \
+	(((V4L2_FIELD_INTERLACED == field) || (V4L2_FIELD_SEQ_TB == field)) || \
+	(V4L2_FIELD_SEQ_BT == field)))
+
+#define VPIF_DISPLAY_MAX_DEVICES	(2)
+#define VPIF_SLICED_BUF_SIZE		(256)
+#define VPIF_SLICED_MAX_SERVICES	(3)
+#define VPIF_VIDEO_INDEX		(0)
+#define VPIF_VBI_INDEX			(1)
+#define VPIF_HBI_INDEX			(2)
+
+/* Setting it to 1 as HBI/VBI support yet to be added , else 3*/
+#define VPIF_NUMOBJECTS	(1)
+
+/* Macros */
+#define ISALIGNED(a)    (0 == ((a) & 7))
+
+/* enumerated data types */
+/* Enumerated data type to give id to each device per channel */
+enum vpif_channel_id {
+	VPIF_CHANNEL2_VIDEO = 0,	/* Channel2 Video */
+	VPIF_CHANNEL3_VIDEO,		/* Channel3 Video */
+};
+
+/* structures */
+
+struct video_obj {
+	enum v4l2_field buf_field;
+	u32 latest_only;		/* indicate whether to return
+					 * most recent displayed frame only */
+	v4l2_std_id stdid;		/* Currently selected or default
+					 * standard */
+	u32 output_id;			/* Current output id */
+};
+
+struct vbi_obj {
+	int num_services;
+	struct vpif_vbi_params vbiparams;	/* vpif parameters for the raw
+						 * vbi data */
+};
+
+struct common_obj {
+	/* Buffer specific parameters */
+	u8 *fbuffers[VIDEO_MAX_FRAME];		/* List of buffer pointers for
+						 * storing frames */
+	u32 numbuffers;				/* number of buffers */
+	struct videobuf_buffer *cur_frm;	/* Pointer pointing to current
+						 * videobuf_buffer */
+	struct videobuf_buffer *next_frm;	/* Pointer pointing to next
+						 * videobuf_buffer */
+	enum v4l2_memory memory;		/* This field keeps track of
+						 * type of buffer exchange
+						 * method user has selected */
+	struct v4l2_format fmt;			/* Used to store the format */
+	struct videobuf_queue buffer_queue;	/* Buffer queue used in
+						 * video-buf */
+	struct list_head dma_queue;		/* Queue of filled frames */
+	spinlock_t irqlock;			/* Used in video-buf */
+
+	/* channel specific parameters */
+	struct mutex lock;			/* lock used to access this
+						 * structure */
+	u32 io_usrs;				/* number of users performing
+						 * IO */
+	u8 started;				/* Indicates whether streaming
+						 * started */
+	u32 ytop_off;				/* offset of Y top from the
+						 * starting of the buffer */
+	u32 ybtm_off;				/* offset of Y bottom from the
+						 * starting of the buffer */
+	u32 ctop_off;				/* offset of C top from the
+						 * starting of the buffer */
+	u32 cbtm_off;				/* offset of C bottom from the
+						 * starting of the buffer */
+	/* Function pointer to set the addresses */
+	void (*set_addr) (unsigned long, unsigned long,
+				unsigned long, unsigned long);
+	u32 height;
+	u32 width;
+};
+
+struct channel_obj {
+	/* V4l2 specific parameters */
+	struct video_device *video_dev;	/* Identifies video device for
+					 * this channel */
+	struct v4l2_prio_state prio;	/* Used to keep track of state of
+					 * the priority */
+	atomic_t usrs;			/* number of open instances of
+					 * the channel */
+	u32 field_id;			/* Indicates id of the field
+					 * which is being displayed */
+	u8 initialized;			/* flag to indicate whether
+					 * encoder is initialized */
+
+	enum vpif_channel_id channel_id;/* Identifies channel */
+	struct vpif_params vpifparams;
+	struct common_obj common[VPIF_NUMOBJECTS];
+	struct video_obj video;
+	struct vbi_obj vbi;
+};
+
+/* File handle structure */
+struct vpif_fh {
+	struct channel_obj *channel;	/* pointer to channel object for
+					 * opened device */
+	u8 io_allowed[VPIF_NUMOBJECTS];	/* Indicates whether this file handle
+					 * is doing IO */
+	enum v4l2_priority prio;	/* Used to keep track priority of
+					 * this instance */
+	u8 initialized;			/* Used to keep track of whether this
+					 * file handle has initialized
+					 * channel or not */
+};
+
+/* vpif device structure */
+struct vpif_device {
+	struct v4l2_device v4l2_dev;
+	struct channel_obj *dev[VPIF_DISPLAY_NUM_CHANNELS];
+	struct v4l2_subdev **sd;
+
+};
+
+struct vpif_config_params {
+	u32 min_bufsize[VPIF_DISPLAY_NUM_CHANNELS];
+	u32 channel_bufsize[VPIF_DISPLAY_NUM_CHANNELS];
+	u8 numbuffers[VPIF_DISPLAY_NUM_CHANNELS];
+	u8 min_numbuffers;
+};
+
+/* Struct which keeps track of the line numbers for the sliced vbi service */
+struct vpif_service_line {
+	u16 service_id;
+	u16 service_line[2];
+	u16 enc_service_id;
+	u8 bytestowrite;
+};
+
+#endif				/* DAVINCIHD_DISPLAY_H */
-- 
cgit v1.2.3


From e9f4bb559c39cd85ef5365fa50e1893df4b67b96 Mon Sep 17 00:00:00 2001
From: Chaithrika U S <chaithrika@ti.com>
Date: Tue, 9 Jun 2009 06:38:58 -0300
Subject: V4L/DVB (12177): dm646x: Add an entry for dm646x EVM card at building
 system

Makefile and Kconfig changes for DM646x Video Display device, using
davinci/vpif, adv7343 and ths7303 drivers.

Signed-off-by: Manjunath Hadli <mrh@ti.com>
Signed-off-by: Brijesh Jadav <brijesh.j@ti.com>
Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/Kconfig          | 22 ++++++++++++++++++++++
 drivers/media/video/Makefile         |  2 ++
 drivers/media/video/davinci/Makefile |  9 +++++++++
 3 files changed, 33 insertions(+)
 create mode 100644 drivers/media/video/davinci/Makefile

(limited to 'drivers/media')

diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index e01b759faf5..df20283151c 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -493,6 +493,28 @@ config VIDEO_UPD64083
 
 endmenu # encoder / decoder chips
 
+config DISPLAY_DAVINCI_DM646X_EVM
+	tristate "DM646x EVM Video Display"
+	depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
+	select VIDEOBUF_DMA_CONTIG
+	select VIDEO_DAVINCI_VPIF
+	select VIDEO_ADV7343
+	select VIDEO_THS7303
+	help
+	  Support for DaVinci based display device.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called davincihd_display.
+
+config VIDEO_DAVINCI_VPIF
+	tristate "DaVinci VPIF Driver"
+	depends on DISPLAY_DAVINCI_DM646X_EVM
+	help
+	  Support for DaVinci VPIF Driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called vpif.
+
 config VIDEO_VIVI
 	tristate "Virtual Video Driver"
 	depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 1dddea1ada5..70804caa5f3 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -161,6 +161,8 @@ obj-$(CONFIG_VIDEO_SAA7164)     += saa7164/
 
 obj-$(CONFIG_VIDEO_IR_I2C)  += ir-kbd-i2c.o
 
+obj-$(CONFIG_ARCH_DAVINCI)	+= davinci/
+
 EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
 EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
 EXTRA_CFLAGS += -Idrivers/media/common/tuners
diff --git a/drivers/media/video/davinci/Makefile b/drivers/media/video/davinci/Makefile
new file mode 100644
index 00000000000..7fe9bce9716
--- /dev/null
+++ b/drivers/media/video/davinci/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the davinci video device drivers.
+#
+
+# VPIF
+obj-$(CONFIG_VIDEO_DAVINCI_VPIF) += vpif.o
+
+#DM646x EVM Display driver
+obj-$(CONFIG_DISPLAY_DAVINCI_DM646X_EVM) += vpif_display.o
-- 
cgit v1.2.3


From 13df4f6a36e41e0c8f25273ef2077b239f633265 Mon Sep 17 00:00:00 2001
From: Chaithrika U S <chaithrika@ti.com>
Date: Mon, 22 Jun 2009 09:02:55 -0300
Subject: V4L/DVB (12178): vpif_display: Fix compile time warnings for mutex
 locking

mutex_lock_interruptible return value has to be handled properly to indicate
the status to the higher layers of the kernel.

Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/davinci/vpif_display.c | 31 ++++++++++++++++++++++--------
 1 file changed, 23 insertions(+), 8 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/davinci/vpif_display.c b/drivers/media/video/davinci/vpif_display.c
index 5e2b86b3fa6..969d4b3aa78 100644
--- a/drivers/media/video/davinci/vpif_display.c
+++ b/drivers/media/video/davinci/vpif_display.c
@@ -636,7 +636,9 @@ static int vpif_release(struct file *filep)
 	struct channel_obj *ch = fh->channel;
 	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
 
-	mutex_lock_interruptible(&common->lock);
+	if (mutex_lock_interruptible(&common->lock))
+		return -ERESTARTSYS;
+
 	/* if this instance is doing IO */
 	if (fh->io_allowed[VPIF_VIDEO_INDEX]) {
 		/* Reset io_usrs member of channel object */
@@ -720,7 +722,9 @@ static int vpif_g_fmt_vid_out(struct file *file, void *priv,
 		return -EINVAL;
 
 	/* Fill in the information about format */
-	mutex_lock_interruptible(&common->lock);
+	if (mutex_lock_interruptible(&common->lock))
+		return -ERESTARTSYS;
+
 	if (vpif_get_std_info(ch)) {
 		vpif_err("Error getting the standard info\n");
 		return -EINVAL;
@@ -768,7 +772,9 @@ static int vpif_s_fmt_vid_out(struct file *file, void *priv,
 	/* store the pix format in the channel object */
 	common->fmt.fmt.pix = *pixfmt;
 	/* store the format in the channel object */
-	mutex_lock_interruptible(&common->lock);
+	if (mutex_lock_interruptible(&common->lock))
+		return -ERESTARTSYS;
+
 	common->fmt = *fmt;
 	mutex_unlock(&common->lock);
 
@@ -819,7 +825,9 @@ static int vpif_reqbufs(struct file *file, void *priv,
 	index = VPIF_VIDEO_INDEX;
 
 	common = &ch->common[index];
-	mutex_lock_interruptible(&common->lock);
+	if (mutex_lock_interruptible(&common->lock))
+		return -ERESTARTSYS;
+
 	if (common->fmt.type != reqbuf->type) {
 		ret = -EINVAL;
 		goto reqbuf_exit;
@@ -979,7 +987,8 @@ static int vpif_s_std(struct file *file, void *priv, v4l2_std_id *std_id)
 	}
 
 	/* Call encoder subdevice function to set the standard */
-	mutex_lock_interruptible(&common->lock);
+	if (mutex_lock_interruptible(&common->lock))
+		return -ERESTARTSYS;
 
 	ch->video.stdid = *std_id;
 	/* Get the information about the standard */
@@ -1085,7 +1094,9 @@ static int vpif_streamon(struct file *file, void *priv,
 		return ret;
 	}
 
-	mutex_lock_interruptible(&common->lock);
+	if (mutex_lock_interruptible(&common->lock))
+		return -ERESTARTSYS;
+
 	/* If buffer queue is empty, return error */
 	if (list_empty(&common->dma_queue)) {
 		vpif_err("buffer queue is empty\n");
@@ -1185,7 +1196,9 @@ static int vpif_streamoff(struct file *file, void *priv,
 		return -EINVAL;
 	}
 
-	mutex_lock_interruptible(&common->lock);
+	if (mutex_lock_interruptible(&common->lock))
+		return -ERESTARTSYS;
+
 	if (buftype == V4L2_BUF_TYPE_VIDEO_OUTPUT) {
 		/* disable channel */
 		if (VPIF_CHANNEL2_VIDEO == ch->channel_id) {
@@ -1248,7 +1261,9 @@ static int vpif_s_output(struct file *file, void *priv, unsigned int i)
 	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
 	int ret = 0;
 
-	mutex_lock_interruptible(&common->lock);
+	if (mutex_lock_interruptible(&common->lock))
+		return -ERESTARTSYS;
+
 	if (common->started) {
 		vpif_err("Streaming in progress\n");
 		ret = -EBUSY;
-- 
cgit v1.2.3


From 6bcbc08faa575e82f9701c4022847ea594806bcb Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Thu, 2 Jul 2009 16:54:14 -0300
Subject: V4L/DVB (12201): adv7343: remove unused #include <linux/version.h>

Remove unused #include <linux/version.h>'s in drivers/media/video/adv7343.c.

Cc: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/adv7343.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/adv7343.c b/drivers/media/video/adv7343.c
index 30f5caf5dda..df26f2fe44e 100644
--- a/drivers/media/video/adv7343.c
+++ b/drivers/media/video/adv7343.c
@@ -24,7 +24,6 @@
 #include <linux/module.h>
 #include <linux/videodev2.h>
 #include <linux/uaccess.h>
-#include <linux/version.h>
 
 #include <media/adv7343.h>
 #include <media/v4l2-device.h>
-- 
cgit v1.2.3


From 62ef80a1f3fb69711dc7e59394ddc8e88097a7cc Mon Sep 17 00:00:00 2001
From: Muralidharan Karicheri <m-karicheri2@ti.com>
Date: Fri, 19 Jun 2009 07:13:44 -0300
Subject: V4L/DVB (12246): tvp514x: Migration to sub-device framework

This patch converts TVP514x driver to sub-device framework
from V4L2-int framework.

[hverkuil@xs4all.nl: remove inline from the dump_reg function]
Signed-off-by: Brijesh Jadav <brijesh.j@ti.com>
Signed-off-by: Hardik Shah <hardik.shah@ti.com>
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/tvp514x.c      | 875 +++++++++++++++----------------------
 drivers/media/video/tvp514x_regs.h |  10 -
 2 files changed, 349 insertions(+), 536 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/tvp514x.c b/drivers/media/video/tvp514x.c
index 3750f7fadb1..c8386e2f7a9 100644
--- a/drivers/media/video/tvp514x.c
+++ b/drivers/media/video/tvp514x.c
@@ -31,7 +31,10 @@
 #include <linux/i2c.h>
 #include <linux/delay.h>
 #include <linux/videodev2.h>
-#include <media/v4l2-int-device.h>
+
+#include <media/v4l2-device.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-chip-ident.h>
 #include <media/tvp514x.h>
 
 #include "tvp514x_regs.h"
@@ -49,13 +52,11 @@ static int debug;
 module_param(debug, bool, 0644);
 MODULE_PARM_DESC(debug, "Debug level (0-1)");
 
-#define dump_reg(client, reg, val)				\
-	do {							\
-		val = tvp514x_read_reg(client, reg);		\
-		v4l_info(client, "Reg(0x%.2X): 0x%.2X\n", reg, val); \
-	} while (0)
+MODULE_AUTHOR("Texas Instruments");
+MODULE_DESCRIPTION("TVP514X linux decoder driver");
+MODULE_LICENSE("GPL");
 
-/**
+/*
  * enum tvp514x_std - enum for supported standards
  */
 enum tvp514x_std {
@@ -64,15 +65,7 @@ enum tvp514x_std {
 	STD_INVALID
 };
 
-/**
- * enum tvp514x_state - enum for different decoder states
- */
-enum tvp514x_state {
-	STATE_NOT_DETECTED,
-	STATE_DETECTED
-};
-
-/**
+/*
  * struct tvp514x_std_info - Structure to store standard informations
  * @width: Line width in pixels
  * @height:Number of active lines
@@ -87,35 +80,29 @@ struct tvp514x_std_info {
 };
 
 static struct tvp514x_reg tvp514x_reg_list_default[0x40];
-/**
+/*
  * struct tvp514x_decoder - TVP5146/47 decoder object
- * @v4l2_int_device: Slave handle
- * @tvp514x_slave: Slave pointer which is used by @v4l2_int_device
+ * @sd: Subdevice Slave handle
  * @tvp514x_regs: copy of hw's regs with preset values.
  * @pdata: Board specific
- * @client: I2C client data
- * @id: Entry from I2C table
  * @ver: Chip version
- * @state: TVP5146/47 decoder state - detected or not-detected
+ * @streaming: TVP5146/47 decoder streaming - enabled or disabled.
  * @pix: Current pixel format
  * @num_fmts: Number of formats
  * @fmt_list: Format list
  * @current_std: Current standard
  * @num_stds: Number of standards
  * @std_list: Standards list
- * @route: input and output routing at chip level
+ * @input: Input routing at chip level
+ * @output: Output routing at chip level
  */
 struct tvp514x_decoder {
-	struct v4l2_int_device v4l2_int_device;
-	struct v4l2_int_slave tvp514x_slave;
+	struct v4l2_subdev sd;
 	struct tvp514x_reg tvp514x_regs[ARRAY_SIZE(tvp514x_reg_list_default)];
 	const struct tvp514x_platform_data *pdata;
-	struct i2c_client *client;
-
-	struct i2c_device_id *id;
 
 	int ver;
-	enum tvp514x_state state;
+	int streaming;
 
 	struct v4l2_pix_format pix;
 	int num_fmts;
@@ -124,8 +111,11 @@ struct tvp514x_decoder {
 	enum tvp514x_std current_std;
 	int num_stds;
 	struct tvp514x_std_info *std_list;
-
-	struct v4l2_routing route;
+	/*
+	 * Input and Output Routing parameters
+	 */
+	u32 input;
+	u32 output;
 };
 
 /* TVP514x default register values */
@@ -191,7 +181,8 @@ static struct tvp514x_reg tvp514x_reg_list_default[] = {
 	{TOK_TERM, 0, 0},
 };
 
-/* List of image formats supported by TVP5146/47 decoder
+/*
+ * List of image formats supported by TVP5146/47 decoder
  * Currently we are using 8 bit mode only, but can be
  * extended to 10/20 bit mode.
  */
@@ -240,35 +231,29 @@ static struct tvp514x_std_info tvp514x_std_list[] = {
 	},
 	/* Standard: need to add for additional standard */
 };
-/*
- * Control structure for Auto Gain
- *     This is temporary data, will get replaced once
- *     v4l2_ctrl_query_fill supports it.
- */
-static const struct v4l2_queryctrl tvp514x_autogain_ctrl = {
-	.id = V4L2_CID_AUTOGAIN,
-	.name = "Gain, Automatic",
-	.type = V4L2_CTRL_TYPE_BOOLEAN,
-	.minimum = 0,
-	.maximum = 1,
-	.step = 1,
-	.default_value = 1,
-};
+
+
+static inline struct tvp514x_decoder *to_decoder(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct tvp514x_decoder, sd);
+}
+
 
 /*
  * Read a value from a register in an TVP5146/47 decoder device.
  * Returns value read if successful, or non-zero (-1) otherwise.
  */
-static int tvp514x_read_reg(struct i2c_client *client, u8 reg)
+static int tvp514x_read_reg(struct v4l2_subdev *sd, u8 reg)
 {
-	int err;
-	int retry = 0;
+	int err, retry = 0;
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+
 read_again:
 
 	err = i2c_smbus_read_byte_data(client, reg);
 	if (err == -1) {
 		if (retry <= I2C_RETRY_COUNT) {
-			v4l_warn(client, "Read: retry ... %d\n", retry);
+			v4l2_warn(sd, "Read: retry ... %d\n", retry);
 			retry++;
 			msleep_interruptible(10);
 			goto read_again;
@@ -278,20 +263,29 @@ read_again:
 	return err;
 }
 
+static void dump_reg(struct v4l2_subdev *sd, u8 reg)
+{
+	u32 val;
+
+	val = tvp514x_read_reg(sd, reg);
+	v4l2_info(sd, "Reg(0x%.2X): 0x%.2X\n", reg, val);
+}
+
 /*
  * Write a value to a register in an TVP5146/47 decoder device.
  * Returns zero if successful, or non-zero otherwise.
  */
-static int tvp514x_write_reg(struct i2c_client *client, u8 reg, u8 val)
+static int tvp514x_write_reg(struct v4l2_subdev *sd, u8 reg, u8 val)
 {
-	int err;
-	int retry = 0;
+	int err, retry = 0;
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+
 write_again:
 
 	err = i2c_smbus_write_byte_data(client, reg, val);
 	if (err) {
 		if (retry <= I2C_RETRY_COUNT) {
-			v4l_warn(client, "Write: retry ... %d\n", retry);
+			v4l2_warn(sd, "Write: retry ... %d\n", retry);
 			retry++;
 			msleep_interruptible(10);
 			goto write_again;
@@ -311,7 +305,7 @@ write_again:
  * reglist - list of registers to be written
  * Returns zero if successful, or non-zero otherwise.
  */
-static int tvp514x_write_regs(struct i2c_client *client,
+static int tvp514x_write_regs(struct v4l2_subdev *sd,
 			      const struct tvp514x_reg reglist[])
 {
 	int err;
@@ -326,9 +320,9 @@ static int tvp514x_write_regs(struct i2c_client *client,
 		if (next->token == TOK_SKIP)
 			continue;
 
-		err = tvp514x_write_reg(client, next->reg, (u8) next->val);
+		err = tvp514x_write_reg(sd, next->reg, (u8) next->val);
 		if (err) {
-			v4l_err(client, "Write failed. Err[%d]\n", err);
+			v4l2_err(sd, "Write failed. Err[%d]\n", err);
 			return err;
 		}
 	}
@@ -339,17 +333,15 @@ static int tvp514x_write_regs(struct i2c_client *client,
  * tvp514x_get_current_std:
  * Returns the current standard detected by TVP5146/47
  */
-static enum tvp514x_std tvp514x_get_current_std(struct tvp514x_decoder
-						*decoder)
+static enum tvp514x_std tvp514x_get_current_std(struct v4l2_subdev *sd)
 {
 	u8 std, std_status;
 
-	std = tvp514x_read_reg(decoder->client, REG_VIDEO_STD);
-	if ((std & VIDEO_STD_MASK) == VIDEO_STD_AUTO_SWITCH_BIT) {
+	std = tvp514x_read_reg(sd, REG_VIDEO_STD);
+	if ((std & VIDEO_STD_MASK) == VIDEO_STD_AUTO_SWITCH_BIT)
 		/* use the standard status register */
-		std_status = tvp514x_read_reg(decoder->client,
-				REG_VIDEO_STD_STATUS);
-	} else
+		std_status = tvp514x_read_reg(sd, REG_VIDEO_STD_STATUS);
+	else
 		std_status = std;	/* use the standard register itself */
 
 	switch (std_status & VIDEO_STD_MASK) {
@@ -369,70 +361,69 @@ static enum tvp514x_std tvp514x_get_current_std(struct tvp514x_decoder
 /*
  * TVP5146/47 register dump function
  */
-static void tvp514x_reg_dump(struct tvp514x_decoder *decoder)
+static void tvp514x_reg_dump(struct v4l2_subdev *sd)
 {
-	u8 value;
-
-	dump_reg(decoder->client, REG_INPUT_SEL, value);
-	dump_reg(decoder->client, REG_AFE_GAIN_CTRL, value);
-	dump_reg(decoder->client, REG_VIDEO_STD, value);
-	dump_reg(decoder->client, REG_OPERATION_MODE, value);
-	dump_reg(decoder->client, REG_COLOR_KILLER, value);
-	dump_reg(decoder->client, REG_LUMA_CONTROL1, value);
-	dump_reg(decoder->client, REG_LUMA_CONTROL2, value);
-	dump_reg(decoder->client, REG_LUMA_CONTROL3, value);
-	dump_reg(decoder->client, REG_BRIGHTNESS, value);
-	dump_reg(decoder->client, REG_CONTRAST, value);
-	dump_reg(decoder->client, REG_SATURATION, value);
-	dump_reg(decoder->client, REG_HUE, value);
-	dump_reg(decoder->client, REG_CHROMA_CONTROL1, value);
-	dump_reg(decoder->client, REG_CHROMA_CONTROL2, value);
-	dump_reg(decoder->client, REG_COMP_PR_SATURATION, value);
-	dump_reg(decoder->client, REG_COMP_Y_CONTRAST, value);
-	dump_reg(decoder->client, REG_COMP_PB_SATURATION, value);
-	dump_reg(decoder->client, REG_COMP_Y_BRIGHTNESS, value);
-	dump_reg(decoder->client, REG_AVID_START_PIXEL_LSB, value);
-	dump_reg(decoder->client, REG_AVID_START_PIXEL_MSB, value);
-	dump_reg(decoder->client, REG_AVID_STOP_PIXEL_LSB, value);
-	dump_reg(decoder->client, REG_AVID_STOP_PIXEL_MSB, value);
-	dump_reg(decoder->client, REG_HSYNC_START_PIXEL_LSB, value);
-	dump_reg(decoder->client, REG_HSYNC_START_PIXEL_MSB, value);
-	dump_reg(decoder->client, REG_HSYNC_STOP_PIXEL_LSB, value);
-	dump_reg(decoder->client, REG_HSYNC_STOP_PIXEL_MSB, value);
-	dump_reg(decoder->client, REG_VSYNC_START_LINE_LSB, value);
-	dump_reg(decoder->client, REG_VSYNC_START_LINE_MSB, value);
-	dump_reg(decoder->client, REG_VSYNC_STOP_LINE_LSB, value);
-	dump_reg(decoder->client, REG_VSYNC_STOP_LINE_MSB, value);
-	dump_reg(decoder->client, REG_VBLK_START_LINE_LSB, value);
-	dump_reg(decoder->client, REG_VBLK_START_LINE_MSB, value);
-	dump_reg(decoder->client, REG_VBLK_STOP_LINE_LSB, value);
-	dump_reg(decoder->client, REG_VBLK_STOP_LINE_MSB, value);
-	dump_reg(decoder->client, REG_SYNC_CONTROL, value);
-	dump_reg(decoder->client, REG_OUTPUT_FORMATTER1, value);
-	dump_reg(decoder->client, REG_OUTPUT_FORMATTER2, value);
-	dump_reg(decoder->client, REG_OUTPUT_FORMATTER3, value);
-	dump_reg(decoder->client, REG_OUTPUT_FORMATTER4, value);
-	dump_reg(decoder->client, REG_OUTPUT_FORMATTER5, value);
-	dump_reg(decoder->client, REG_OUTPUT_FORMATTER6, value);
-	dump_reg(decoder->client, REG_CLEAR_LOST_LOCK, value);
+	dump_reg(sd, REG_INPUT_SEL);
+	dump_reg(sd, REG_AFE_GAIN_CTRL);
+	dump_reg(sd, REG_VIDEO_STD);
+	dump_reg(sd, REG_OPERATION_MODE);
+	dump_reg(sd, REG_COLOR_KILLER);
+	dump_reg(sd, REG_LUMA_CONTROL1);
+	dump_reg(sd, REG_LUMA_CONTROL2);
+	dump_reg(sd, REG_LUMA_CONTROL3);
+	dump_reg(sd, REG_BRIGHTNESS);
+	dump_reg(sd, REG_CONTRAST);
+	dump_reg(sd, REG_SATURATION);
+	dump_reg(sd, REG_HUE);
+	dump_reg(sd, REG_CHROMA_CONTROL1);
+	dump_reg(sd, REG_CHROMA_CONTROL2);
+	dump_reg(sd, REG_COMP_PR_SATURATION);
+	dump_reg(sd, REG_COMP_Y_CONTRAST);
+	dump_reg(sd, REG_COMP_PB_SATURATION);
+	dump_reg(sd, REG_COMP_Y_BRIGHTNESS);
+	dump_reg(sd, REG_AVID_START_PIXEL_LSB);
+	dump_reg(sd, REG_AVID_START_PIXEL_MSB);
+	dump_reg(sd, REG_AVID_STOP_PIXEL_LSB);
+	dump_reg(sd, REG_AVID_STOP_PIXEL_MSB);
+	dump_reg(sd, REG_HSYNC_START_PIXEL_LSB);
+	dump_reg(sd, REG_HSYNC_START_PIXEL_MSB);
+	dump_reg(sd, REG_HSYNC_STOP_PIXEL_LSB);
+	dump_reg(sd, REG_HSYNC_STOP_PIXEL_MSB);
+	dump_reg(sd, REG_VSYNC_START_LINE_LSB);
+	dump_reg(sd, REG_VSYNC_START_LINE_MSB);
+	dump_reg(sd, REG_VSYNC_STOP_LINE_LSB);
+	dump_reg(sd, REG_VSYNC_STOP_LINE_MSB);
+	dump_reg(sd, REG_VBLK_START_LINE_LSB);
+	dump_reg(sd, REG_VBLK_START_LINE_MSB);
+	dump_reg(sd, REG_VBLK_STOP_LINE_LSB);
+	dump_reg(sd, REG_VBLK_STOP_LINE_MSB);
+	dump_reg(sd, REG_SYNC_CONTROL);
+	dump_reg(sd, REG_OUTPUT_FORMATTER1);
+	dump_reg(sd, REG_OUTPUT_FORMATTER2);
+	dump_reg(sd, REG_OUTPUT_FORMATTER3);
+	dump_reg(sd, REG_OUTPUT_FORMATTER4);
+	dump_reg(sd, REG_OUTPUT_FORMATTER5);
+	dump_reg(sd, REG_OUTPUT_FORMATTER6);
+	dump_reg(sd, REG_CLEAR_LOST_LOCK);
 }
 
 /*
  * Configure the TVP5146/47 with the current register settings
  * Returns zero if successful, or non-zero otherwise.
  */
-static int tvp514x_configure(struct tvp514x_decoder *decoder)
+static int tvp514x_configure(struct v4l2_subdev *sd,
+		struct tvp514x_decoder *decoder)
 {
 	int err;
 
 	/* common register initialization */
 	err =
-	    tvp514x_write_regs(decoder->client, decoder->tvp514x_regs);
+	    tvp514x_write_regs(sd, decoder->tvp514x_regs);
 	if (err)
 		return err;
 
 	if (debug)
-		tvp514x_reg_dump(decoder);
+		tvp514x_reg_dump(sd);
 
 	return 0;
 }
@@ -445,15 +436,17 @@ static int tvp514x_configure(struct tvp514x_decoder *decoder)
  * Returns ENODEV error number if no device is detected, or zero
  * if a device is detected.
  */
-static int tvp514x_detect(struct tvp514x_decoder *decoder)
+static int tvp514x_detect(struct v4l2_subdev *sd,
+		struct tvp514x_decoder *decoder)
 {
 	u8 chip_id_msb, chip_id_lsb, rom_ver;
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
 
-	chip_id_msb = tvp514x_read_reg(decoder->client, REG_CHIP_ID_MSB);
-	chip_id_lsb = tvp514x_read_reg(decoder->client, REG_CHIP_ID_LSB);
-	rom_ver = tvp514x_read_reg(decoder->client, REG_ROM_VERSION);
+	chip_id_msb = tvp514x_read_reg(sd, REG_CHIP_ID_MSB);
+	chip_id_lsb = tvp514x_read_reg(sd, REG_CHIP_ID_LSB);
+	rom_ver = tvp514x_read_reg(sd, REG_ROM_VERSION);
 
-	v4l_dbg(1, debug, decoder->client,
+	v4l2_dbg(1, debug, sd,
 		 "chip id detected msb:0x%x lsb:0x%x rom version:0x%x\n",
 		 chip_id_msb, chip_id_lsb, rom_ver);
 	if ((chip_id_msb != TVP514X_CHIP_ID_MSB)
@@ -462,19 +455,16 @@ static int tvp514x_detect(struct tvp514x_decoder *decoder)
 		/* We didn't read the values we expected, so this must not be
 		 * an TVP5146/47.
 		 */
-		v4l_err(decoder->client,
-			"chip id mismatch msb:0x%x lsb:0x%x\n",
-			chip_id_msb, chip_id_lsb);
+		v4l2_err(sd, "chip id mismatch msb:0x%x lsb:0x%x\n",
+				chip_id_msb, chip_id_lsb);
 		return -ENODEV;
 	}
 
 	decoder->ver = rom_ver;
-	decoder->state = STATE_DETECTED;
 
-	v4l_info(decoder->client,
-			"%s found at 0x%x (%s)\n", decoder->client->name,
-			decoder->client->addr << 1,
-			decoder->client->adapter->name);
+	v4l2_info(sd, "%s (Version - 0x%.2x) found at 0x%x (%s)\n",
+			client->name, decoder->ver,
+			client->addr << 1, client->adapter->name);
 	return 0;
 }
 
@@ -483,17 +473,17 @@ static int tvp514x_detect(struct tvp514x_decoder *decoder)
  * TVP5146/47 decoder driver.
  */
 
-/**
- * ioctl_querystd - V4L2 decoder interface handler for VIDIOC_QUERYSTD ioctl
- * @s: pointer to standard V4L2 device structure
+/*
+ * tvp514x_querystd - V4L2 decoder interface handler for VIDIOC_QUERYSTD ioctl
+ * @sd: pointer to standard V4L2 sub-device structure
  * @std_id: standard V4L2 std_id ioctl enum
  *
  * Returns the current standard detected by TVP5146/47. If no active input is
  * detected, returns -EINVAL
  */
-static int ioctl_querystd(struct v4l2_int_device *s, v4l2_std_id *std_id)
+static int tvp514x_querystd(struct v4l2_subdev *sd, v4l2_std_id *std_id)
 {
-	struct tvp514x_decoder *decoder = s->priv;
+	struct tvp514x_decoder *decoder = to_decoder(sd);
 	enum tvp514x_std current_std;
 	enum tvp514x_input input_sel;
 	u8 sync_lock_status, lock_mask;
@@ -502,11 +492,11 @@ static int ioctl_querystd(struct v4l2_int_device *s, v4l2_std_id *std_id)
 		return -EINVAL;
 
 	/* get the current standard */
-	current_std = tvp514x_get_current_std(decoder);
+	current_std = tvp514x_get_current_std(sd);
 	if (current_std == STD_INVALID)
 		return -EINVAL;
 
-	input_sel = decoder->route.input;
+	input_sel = decoder->input;
 
 	switch (input_sel) {
 	case INPUT_CVBS_VI1A:
@@ -544,42 +534,39 @@ static int ioctl_querystd(struct v4l2_int_device *s, v4l2_std_id *std_id)
 		return -EINVAL;
 	}
 	/* check whether signal is locked */
-	sync_lock_status = tvp514x_read_reg(decoder->client, REG_STATUS1);
+	sync_lock_status = tvp514x_read_reg(sd, REG_STATUS1);
 	if (lock_mask != (sync_lock_status & lock_mask))
 		return -EINVAL;	/* No input detected */
 
 	decoder->current_std = current_std;
 	*std_id = decoder->std_list[current_std].standard.id;
 
-	v4l_dbg(1, debug, decoder->client, "Current STD: %s",
+	v4l2_dbg(1, debug, sd, "Current STD: %s",
 			decoder->std_list[current_std].standard.name);
 	return 0;
 }
 
-/**
- * ioctl_s_std - V4L2 decoder interface handler for VIDIOC_S_STD ioctl
- * @s: pointer to standard V4L2 device structure
+/*
+ * tvp514x_s_std - V4L2 decoder interface handler for VIDIOC_S_STD ioctl
+ * @sd: pointer to standard V4L2 sub-device structure
  * @std_id: standard V4L2 v4l2_std_id ioctl enum
  *
  * If std_id is supported, sets the requested standard. Otherwise, returns
  * -EINVAL
  */
-static int ioctl_s_std(struct v4l2_int_device *s, v4l2_std_id *std_id)
+static int tvp514x_s_std(struct v4l2_subdev *sd, v4l2_std_id std_id)
 {
-	struct tvp514x_decoder *decoder = s->priv;
+	struct tvp514x_decoder *decoder = to_decoder(sd);
 	int err, i;
 
-	if (std_id == NULL)
-		return -EINVAL;
-
 	for (i = 0; i < decoder->num_stds; i++)
-		if (*std_id & decoder->std_list[i].standard.id)
+		if (std_id & decoder->std_list[i].standard.id)
 			break;
 
 	if ((i == decoder->num_stds) || (i == STD_INVALID))
 		return -EINVAL;
 
-	err = tvp514x_write_reg(decoder->client, REG_VIDEO_STD,
+	err = tvp514x_write_reg(sd, REG_VIDEO_STD,
 				decoder->std_list[i].video_std);
 	if (err)
 		return err;
@@ -588,24 +575,24 @@ static int ioctl_s_std(struct v4l2_int_device *s, v4l2_std_id *std_id)
 	decoder->tvp514x_regs[REG_VIDEO_STD].val =
 		decoder->std_list[i].video_std;
 
-	v4l_dbg(1, debug, decoder->client, "Standard set to: %s",
+	v4l2_dbg(1, debug, sd, "Standard set to: %s",
 			decoder->std_list[i].standard.name);
 	return 0;
 }
 
-/**
- * ioctl_s_routing - V4L2 decoder interface handler for VIDIOC_S_INPUT ioctl
- * @s: pointer to standard V4L2 device structure
+/*
+ * tvp514x_s_routing - V4L2 decoder interface handler for VIDIOC_S_INPUT ioctl
+ * @sd: pointer to standard V4L2 sub-device structure
  * @index: number of the input
  *
  * If index is valid, selects the requested input. Otherwise, returns -EINVAL if
  * the input is not supported or there is no active signal present in the
  * selected input.
  */
-static int ioctl_s_routing(struct v4l2_int_device *s,
-				struct v4l2_routing *route)
+static int tvp514x_s_routing(struct v4l2_subdev *sd,
+				u32 input, u32 output, u32 config)
 {
-	struct tvp514x_decoder *decoder = s->priv;
+	struct tvp514x_decoder *decoder = to_decoder(sd);
 	int err;
 	enum tvp514x_input input_sel;
 	enum tvp514x_output output_sel;
@@ -613,20 +600,20 @@ static int ioctl_s_routing(struct v4l2_int_device *s,
 	u8 sync_lock_status, lock_mask;
 	int try_count = LOCK_RETRY_COUNT;
 
-	if ((!route) || (route->input >= INPUT_INVALID) ||
-			(route->output >= OUTPUT_INVALID))
+	if ((input >= INPUT_INVALID) ||
+			(output >= OUTPUT_INVALID))
 		return -EINVAL;	/* Index out of bound */
 
-	input_sel = route->input;
-	output_sel = route->output;
+	input_sel = input;
+	output_sel = output;
 
-	err = tvp514x_write_reg(decoder->client, REG_INPUT_SEL, input_sel);
+	err = tvp514x_write_reg(sd, REG_INPUT_SEL, input_sel);
 	if (err)
 		return err;
 
-	output_sel |= tvp514x_read_reg(decoder->client,
+	output_sel |= tvp514x_read_reg(sd,
 			REG_OUTPUT_FORMATTER1) & 0x7;
-	err = tvp514x_write_reg(decoder->client, REG_OUTPUT_FORMATTER1,
+	err = tvp514x_write_reg(sd, REG_OUTPUT_FORMATTER1,
 			output_sel);
 	if (err)
 		return err;
@@ -637,7 +624,7 @@ static int ioctl_s_routing(struct v4l2_int_device *s,
 	/* Clear status */
 	msleep(LOCK_RETRY_DELAY);
 	err =
-	    tvp514x_write_reg(decoder->client, REG_CLEAR_LOST_LOCK, 0x01);
+	    tvp514x_write_reg(sd, REG_CLEAR_LOST_LOCK, 0x01);
 	if (err)
 		return err;
 
@@ -682,11 +669,11 @@ static int ioctl_s_routing(struct v4l2_int_device *s,
 		msleep(LOCK_RETRY_DELAY);
 
 		/* get the current standard for future reference */
-		current_std = tvp514x_get_current_std(decoder);
+		current_std = tvp514x_get_current_std(sd);
 		if (current_std == STD_INVALID)
 			continue;
 
-		sync_lock_status = tvp514x_read_reg(decoder->client,
+		sync_lock_status = tvp514x_read_reg(sd,
 				REG_STATUS1);
 		if (lock_mask == (sync_lock_status & lock_mask))
 			break;	/* Input detected */
@@ -696,28 +683,26 @@ static int ioctl_s_routing(struct v4l2_int_device *s,
 		return -EINVAL;
 
 	decoder->current_std = current_std;
-	decoder->route.input = route->input;
-	decoder->route.output = route->output;
+	decoder->input = input;
+	decoder->output = output;
 
-	v4l_dbg(1, debug, decoder->client,
-			"Input set to: %d, std : %d",
+	v4l2_dbg(1, debug, sd, "Input set to: %d, std : %d",
 			input_sel, current_std);
 
 	return 0;
 }
 
-/**
- * ioctl_queryctrl - V4L2 decoder interface handler for VIDIOC_QUERYCTRL ioctl
- * @s: pointer to standard V4L2 device structure
+/*
+ * tvp514x_queryctrl - V4L2 decoder interface handler for VIDIOC_QUERYCTRL ioctl
+ * @sd: pointer to standard V4L2 sub-device structure
  * @qctrl: standard V4L2 v4l2_queryctrl structure
  *
  * If the requested control is supported, returns the control information.
  * Otherwise, returns -EINVAL if the control is not supported.
  */
 static int
-ioctl_queryctrl(struct v4l2_int_device *s, struct v4l2_queryctrl *qctrl)
+tvp514x_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qctrl)
 {
-	struct tvp514x_decoder *decoder = s->priv;
 	int err = -EINVAL;
 
 	if (qctrl == NULL)
@@ -744,30 +729,27 @@ ioctl_queryctrl(struct v4l2_int_device *s, struct v4l2_queryctrl *qctrl)
 		err = v4l2_ctrl_query_fill(qctrl, -180, 180, 180, 0);
 		break;
 	case V4L2_CID_AUTOGAIN:
-		/* Autogain is either 0 or 1*/
-		memcpy(qctrl, &tvp514x_autogain_ctrl,
-				sizeof(struct v4l2_queryctrl));
-		err = 0;
+		/*
+		 * Auto Gain supported is -
+		 * 	0 - 1 (Default - 1)
+		 */
+		err = v4l2_ctrl_query_fill(qctrl, 0, 1, 1, 1);
 		break;
 	default:
-		v4l_err(decoder->client,
-			"invalid control id %d\n", qctrl->id);
+		v4l2_err(sd, "invalid control id %d\n", qctrl->id);
 		return err;
 	}
 
-	v4l_dbg(1, debug, decoder->client,
-			"Query Control: %s : Min - %d, Max - %d, Def - %d",
-			qctrl->name,
-			qctrl->minimum,
-			qctrl->maximum,
+	v4l2_dbg(1, debug, sd, "Query Control:%s: Min - %d, Max - %d, Def - %d",
+			qctrl->name, qctrl->minimum, qctrl->maximum,
 			qctrl->default_value);
 
 	return err;
 }
 
-/**
- * ioctl_g_ctrl - V4L2 decoder interface handler for VIDIOC_G_CTRL ioctl
- * @s: pointer to standard V4L2 device structure
+/*
+ * tvp514x_g_ctrl - V4L2 decoder interface handler for VIDIOC_G_CTRL ioctl
+ * @sd: pointer to standard V4L2 sub-device structure
  * @ctrl: pointer to v4l2_control structure
  *
  * If the requested control is supported, returns the control's current
@@ -775,9 +757,9 @@ ioctl_queryctrl(struct v4l2_int_device *s, struct v4l2_queryctrl *qctrl)
  * supported.
  */
 static int
-ioctl_g_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl)
+tvp514x_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 {
-	struct tvp514x_decoder *decoder = s->priv;
+	struct tvp514x_decoder *decoder = to_decoder(sd);
 
 	if (ctrl == NULL)
 		return -EINVAL;
@@ -811,74 +793,70 @@ ioctl_g_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl)
 
 		break;
 	default:
-		v4l_err(decoder->client,
-			"invalid control id %d\n", ctrl->id);
+		v4l2_err(sd, "invalid control id %d\n", ctrl->id);
 		return -EINVAL;
 	}
 
-	v4l_dbg(1, debug, decoder->client,
-			"Get Control: ID - %d - %d",
+	v4l2_dbg(1, debug, sd, "Get Control: ID - %d - %d",
 			ctrl->id, ctrl->value);
 	return 0;
 }
 
-/**
- * ioctl_s_ctrl - V4L2 decoder interface handler for VIDIOC_S_CTRL ioctl
- * @s: pointer to standard V4L2 device structure
+/*
+ * tvp514x_s_ctrl - V4L2 decoder interface handler for VIDIOC_S_CTRL ioctl
+ * @sd: pointer to standard V4L2 sub-device structure
  * @ctrl: pointer to v4l2_control structure
  *
  * If the requested control is supported, sets the control's current
  * value in HW. Otherwise, returns -EINVAL if the control is not supported.
  */
 static int
-ioctl_s_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl)
+tvp514x_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 {
-	struct tvp514x_decoder *decoder = s->priv;
+	struct tvp514x_decoder *decoder = to_decoder(sd);
 	int err = -EINVAL, value;
 
 	if (ctrl == NULL)
 		return err;
 
-	value = (__s32) ctrl->value;
+	value = ctrl->value;
 
 	switch (ctrl->id) {
 	case V4L2_CID_BRIGHTNESS:
 		if (ctrl->value < 0 || ctrl->value > 255) {
-			v4l_err(decoder->client,
-					"invalid brightness setting %d\n",
+			v4l2_err(sd, "invalid brightness setting %d\n",
 					ctrl->value);
 			return -ERANGE;
 		}
-		err = tvp514x_write_reg(decoder->client, REG_BRIGHTNESS,
+		err = tvp514x_write_reg(sd, REG_BRIGHTNESS,
 				value);
 		if (err)
 			return err;
+
 		decoder->tvp514x_regs[REG_BRIGHTNESS].val = value;
 		break;
 	case V4L2_CID_CONTRAST:
 		if (ctrl->value < 0 || ctrl->value > 255) {
-			v4l_err(decoder->client,
-					"invalid contrast setting %d\n",
+			v4l2_err(sd, "invalid contrast setting %d\n",
 					ctrl->value);
 			return -ERANGE;
 		}
-		err = tvp514x_write_reg(decoder->client, REG_CONTRAST,
-				value);
+		err = tvp514x_write_reg(sd, REG_CONTRAST, value);
 		if (err)
 			return err;
+
 		decoder->tvp514x_regs[REG_CONTRAST].val = value;
 		break;
 	case V4L2_CID_SATURATION:
 		if (ctrl->value < 0 || ctrl->value > 255) {
-			v4l_err(decoder->client,
-					"invalid saturation setting %d\n",
+			v4l2_err(sd, "invalid saturation setting %d\n",
 					ctrl->value);
 			return -ERANGE;
 		}
-		err = tvp514x_write_reg(decoder->client, REG_SATURATION,
-				value);
+		err = tvp514x_write_reg(sd, REG_SATURATION, value);
 		if (err)
 			return err;
+
 		decoder->tvp514x_regs[REG_SATURATION].val = value;
 		break;
 	case V4L2_CID_HUE:
@@ -889,15 +867,13 @@ ioctl_s_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl)
 		else if (value == 0)
 			value = 0;
 		else {
-			v4l_err(decoder->client,
-					"invalid hue setting %d\n",
-					ctrl->value);
+			v4l2_err(sd, "invalid hue setting %d\n", ctrl->value);
 			return -ERANGE;
 		}
-		err = tvp514x_write_reg(decoder->client, REG_HUE,
-				value);
+		err = tvp514x_write_reg(sd, REG_HUE, value);
 		if (err)
 			return err;
+
 		decoder->tvp514x_regs[REG_HUE].val = value;
 		break;
 	case V4L2_CID_AUTOGAIN:
@@ -906,41 +882,38 @@ ioctl_s_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl)
 		else if (value == 0)
 			value = 0x0C;
 		else {
-			v4l_err(decoder->client,
-					"invalid auto gain setting %d\n",
+			v4l2_err(sd, "invalid auto gain setting %d\n",
 					ctrl->value);
 			return -ERANGE;
 		}
-		err = tvp514x_write_reg(decoder->client, REG_AFE_GAIN_CTRL,
-				value);
+		err = tvp514x_write_reg(sd, REG_AFE_GAIN_CTRL, value);
 		if (err)
 			return err;
+
 		decoder->tvp514x_regs[REG_AFE_GAIN_CTRL].val = value;
 		break;
 	default:
-		v4l_err(decoder->client,
-			"invalid control id %d\n", ctrl->id);
+		v4l2_err(sd, "invalid control id %d\n", ctrl->id);
 		return err;
 	}
 
-	v4l_dbg(1, debug, decoder->client,
-			"Set Control: ID - %d - %d",
+	v4l2_dbg(1, debug, sd, "Set Control: ID - %d - %d",
 			ctrl->id, ctrl->value);
 
 	return err;
 }
 
-/**
- * ioctl_enum_fmt_cap - Implement the CAPTURE buffer VIDIOC_ENUM_FMT ioctl
- * @s: pointer to standard V4L2 device structure
+/*
+ * tvp514x_enum_fmt_cap - Implement the CAPTURE buffer VIDIOC_ENUM_FMT ioctl
+ * @sd: pointer to standard V4L2 sub-device structure
  * @fmt: standard V4L2 VIDIOC_ENUM_FMT ioctl structure
  *
  * Implement the VIDIOC_ENUM_FMT ioctl to enumerate supported formats
  */
 static int
-ioctl_enum_fmt_cap(struct v4l2_int_device *s, struct v4l2_fmtdesc *fmt)
+tvp514x_enum_fmt_cap(struct v4l2_subdev *sd, struct v4l2_fmtdesc *fmt)
 {
-	struct tvp514x_decoder *decoder = s->priv;
+	struct tvp514x_decoder *decoder = to_decoder(sd);
 	int index;
 
 	if (fmt == NULL)
@@ -956,16 +929,15 @@ ioctl_enum_fmt_cap(struct v4l2_int_device *s, struct v4l2_fmtdesc *fmt)
 	memcpy(fmt, &decoder->fmt_list[index],
 		sizeof(struct v4l2_fmtdesc));
 
-	v4l_dbg(1, debug, decoder->client,
-			"Current FMT: index - %d (%s)",
+	v4l2_dbg(1, debug, sd, "Current FMT: index - %d (%s)",
 			decoder->fmt_list[index].index,
 			decoder->fmt_list[index].description);
 	return 0;
 }
 
-/**
- * ioctl_try_fmt_cap - Implement the CAPTURE buffer VIDIOC_TRY_FMT ioctl
- * @s: pointer to standard V4L2 device structure
+/*
+ * tvp514x_try_fmt_cap - Implement the CAPTURE buffer VIDIOC_TRY_FMT ioctl
+ * @sd: pointer to standard V4L2 sub-device structure
  * @f: pointer to standard V4L2 VIDIOC_TRY_FMT ioctl structure
  *
  * Implement the VIDIOC_TRY_FMT ioctl for the CAPTURE buffer type. This
@@ -973,9 +945,9 @@ ioctl_enum_fmt_cap(struct v4l2_int_device *s, struct v4l2_fmtdesc *fmt)
  * without actually making it take effect.
  */
 static int
-ioctl_try_fmt_cap(struct v4l2_int_device *s, struct v4l2_format *f)
+tvp514x_try_fmt_cap(struct v4l2_subdev *sd, struct v4l2_format *f)
 {
-	struct tvp514x_decoder *decoder = s->priv;
+	struct tvp514x_decoder *decoder = to_decoder(sd);
 	int ifmt;
 	struct v4l2_pix_format *pix;
 	enum tvp514x_std current_std;
@@ -989,7 +961,7 @@ ioctl_try_fmt_cap(struct v4l2_int_device *s, struct v4l2_format *f)
 	pix = &f->fmt.pix;
 
 	/* Calculate height and width based on current standard */
-	current_std = tvp514x_get_current_std(decoder);
+	current_std = tvp514x_get_current_std(sd);
 	if (current_std == STD_INVALID)
 		return -EINVAL;
 
@@ -1012,17 +984,16 @@ ioctl_try_fmt_cap(struct v4l2_int_device *s, struct v4l2_format *f)
 	pix->colorspace = V4L2_COLORSPACE_SMPTE170M;
 	pix->priv = 0;
 
-	v4l_dbg(1, debug, decoder->client,
-			"Try FMT: pixelformat - %s, bytesperline - %d"
+	v4l2_dbg(1, debug, sd, "Try FMT: pixelformat - %s, bytesperline - %d"
 			"Width - %d, Height - %d",
 			decoder->fmt_list[ifmt].description, pix->bytesperline,
 			pix->width, pix->height);
 	return 0;
 }
 
-/**
- * ioctl_s_fmt_cap - V4L2 decoder interface handler for VIDIOC_S_FMT ioctl
- * @s: pointer to standard V4L2 device structure
+/*
+ * tvp514x_s_fmt_cap - V4L2 decoder interface handler for VIDIOC_S_FMT ioctl
+ * @sd: pointer to standard V4L2 sub-device structure
  * @f: pointer to standard V4L2 VIDIOC_S_FMT ioctl structure
  *
  * If the requested format is supported, configures the HW to use that
@@ -1030,9 +1001,9 @@ ioctl_try_fmt_cap(struct v4l2_int_device *s, struct v4l2_format *f)
  * correctly configured.
  */
 static int
-ioctl_s_fmt_cap(struct v4l2_int_device *s, struct v4l2_format *f)
+tvp514x_s_fmt_cap(struct v4l2_subdev *sd, struct v4l2_format *f)
 {
-	struct tvp514x_decoder *decoder = s->priv;
+	struct tvp514x_decoder *decoder = to_decoder(sd);
 	struct v4l2_pix_format *pix;
 	int rval;
 
@@ -1043,7 +1014,7 @@ ioctl_s_fmt_cap(struct v4l2_int_device *s, struct v4l2_format *f)
 		return -EINVAL;	/* only capture is supported */
 
 	pix = &f->fmt.pix;
-	rval = ioctl_try_fmt_cap(s, f);
+	rval = tvp514x_try_fmt_cap(sd, f);
 	if (rval)
 		return rval;
 
@@ -1052,18 +1023,18 @@ ioctl_s_fmt_cap(struct v4l2_int_device *s, struct v4l2_format *f)
 	return rval;
 }
 
-/**
- * ioctl_g_fmt_cap - V4L2 decoder interface handler for ioctl_g_fmt_cap
- * @s: pointer to standard V4L2 device structure
+/*
+ * tvp514x_g_fmt_cap - V4L2 decoder interface handler for tvp514x_g_fmt_cap
+ * @sd: pointer to standard V4L2 sub-device structure
  * @f: pointer to standard V4L2 v4l2_format structure
  *
  * Returns the decoder's current pixel format in the v4l2_format
  * parameter.
  */
 static int
-ioctl_g_fmt_cap(struct v4l2_int_device *s, struct v4l2_format *f)
+tvp514x_g_fmt_cap(struct v4l2_subdev *sd, struct v4l2_format *f)
 {
-	struct tvp514x_decoder *decoder = s->priv;
+	struct tvp514x_decoder *decoder = to_decoder(sd);
 
 	if (f == NULL)
 		return -EINVAL;
@@ -1073,25 +1044,24 @@ ioctl_g_fmt_cap(struct v4l2_int_device *s, struct v4l2_format *f)
 
 	f->fmt.pix = decoder->pix;
 
-	v4l_dbg(1, debug, decoder->client,
-			"Current FMT: bytesperline - %d"
+	v4l2_dbg(1, debug, sd, "Current FMT: bytesperline - %d"
 			"Width - %d, Height - %d",
 			decoder->pix.bytesperline,
 			decoder->pix.width, decoder->pix.height);
 	return 0;
 }
 
-/**
- * ioctl_g_parm - V4L2 decoder interface handler for VIDIOC_G_PARM ioctl
- * @s: pointer to standard V4L2 device structure
+/*
+ * tvp514x_g_parm - V4L2 decoder interface handler for VIDIOC_G_PARM ioctl
+ * @sd: pointer to standard V4L2 sub-device structure
  * @a: pointer to standard V4L2 VIDIOC_G_PARM ioctl structure
  *
  * Returns the decoder's video CAPTURE parameters.
  */
 static int
-ioctl_g_parm(struct v4l2_int_device *s, struct v4l2_streamparm *a)
+tvp514x_g_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *a)
 {
-	struct tvp514x_decoder *decoder = s->priv;
+	struct tvp514x_decoder *decoder = to_decoder(sd);
 	struct v4l2_captureparm *cparm;
 	enum tvp514x_std current_std;
 
@@ -1105,7 +1075,7 @@ ioctl_g_parm(struct v4l2_int_device *s, struct v4l2_streamparm *a)
 	a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
 
 	/* get the current standard */
-	current_std = tvp514x_get_current_std(decoder);
+	current_std = tvp514x_get_current_std(sd);
 	if (current_std == STD_INVALID)
 		return -EINVAL;
 
@@ -1119,18 +1089,18 @@ ioctl_g_parm(struct v4l2_int_device *s, struct v4l2_streamparm *a)
 	return 0;
 }
 
-/**
- * ioctl_s_parm - V4L2 decoder interface handler for VIDIOC_S_PARM ioctl
- * @s: pointer to standard V4L2 device structure
+/*
+ * tvp514x_s_parm - V4L2 decoder interface handler for VIDIOC_S_PARM ioctl
+ * @sd: pointer to standard V4L2 sub-device structure
  * @a: pointer to standard V4L2 VIDIOC_S_PARM ioctl structure
  *
  * Configures the decoder to use the input parameters, if possible. If
  * not possible, returns the appropriate error code.
  */
 static int
-ioctl_s_parm(struct v4l2_int_device *s, struct v4l2_streamparm *a)
+tvp514x_s_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *a)
 {
-	struct tvp514x_decoder *decoder = s->priv;
+	struct tvp514x_decoder *decoder = to_decoder(sd);
 	struct v4l2_fract *timeperframe;
 	enum tvp514x_std current_std;
 
@@ -1143,7 +1113,7 @@ ioctl_s_parm(struct v4l2_int_device *s, struct v4l2_streamparm *a)
 	timeperframe = &a->parm.capture.timeperframe;
 
 	/* get the current standard */
-	current_std = tvp514x_get_current_std(decoder);
+	current_std = tvp514x_get_current_std(sd);
 	if (current_std == STD_INVALID)
 		return -EINVAL;
 
@@ -1155,112 +1125,59 @@ ioctl_s_parm(struct v4l2_int_device *s, struct v4l2_streamparm *a)
 	return 0;
 }
 
-/**
- * ioctl_g_ifparm - V4L2 decoder interface handler for vidioc_int_g_ifparm_num
- * @s: pointer to standard V4L2 device structure
- * @p: pointer to standard V4L2 vidioc_int_g_ifparm_num ioctl structure
- *
- * Gets slave interface parameters.
- * Calculates the required xclk value to support the requested
- * clock parameters in p. This value is returned in the p
- * parameter.
- */
-static int ioctl_g_ifparm(struct v4l2_int_device *s, struct v4l2_ifparm *p)
-{
-	struct tvp514x_decoder *decoder = s->priv;
-	int rval;
-
-	if (p == NULL)
-		return -EINVAL;
-
-	if (NULL == decoder->pdata->ifparm)
-		return -EINVAL;
-
-	rval = decoder->pdata->ifparm(p);
-	if (rval) {
-		v4l_err(decoder->client, "g_ifparm.Err[%d]\n", rval);
-		return rval;
-	}
-
-	p->u.bt656.clock_curr = TVP514X_XCLK_BT656;
-
-	return 0;
-}
-
-/**
- * ioctl_g_priv - V4L2 decoder interface handler for vidioc_int_g_priv_num
- * @s: pointer to standard V4L2 device structure
- * @p: void pointer to hold decoder's private data address
- *
- * Returns device's (decoder's) private data area address in p parameter
- */
-static int ioctl_g_priv(struct v4l2_int_device *s, void *p)
-{
-	struct tvp514x_decoder *decoder = s->priv;
-
-	if (NULL == decoder->pdata->priv_data_set)
-		return -EINVAL;
-
-	return decoder->pdata->priv_data_set(p);
-}
-
-/**
- * ioctl_s_power - V4L2 decoder interface handler for vidioc_int_s_power_num
- * @s: pointer to standard V4L2 device structure
- * @on: power state to which device is to be set
+/*
+ * tvp514x_s_stream - V4L2 decoder interface handler for vidioc_int_s_power_num
+ * @sd: pointer to standard V4L2 sub-device structure
+ * @enable: streaming enable or disable
  *
- * Sets devices power state to requrested state, if possible.
+ * Sets streaming to enable or disable, if possible.
  */
-static int ioctl_s_power(struct v4l2_int_device *s, enum v4l2_power on)
+static int tvp514x_s_stream(struct v4l2_subdev *sd, int enable)
 {
-	struct tvp514x_decoder *decoder = s->priv;
 	int err = 0;
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct tvp514x_decoder *decoder = to_decoder(sd);
 
-	switch (on) {
-	case V4L2_POWER_OFF:
-		/* Power Down Sequence */
-		err =
-		    tvp514x_write_reg(decoder->client, REG_OPERATION_MODE,
-					0x01);
-		/* Disable mux for TVP5146/47 decoder data path */
-		if (decoder->pdata->power_set)
-			err |= decoder->pdata->power_set(on);
-		decoder->state = STATE_NOT_DETECTED;
-		break;
+	if (decoder->streaming == enable)
+		return 0;
 
-	case V4L2_POWER_STANDBY:
-		if (decoder->pdata->power_set)
-			err = decoder->pdata->power_set(on);
+	switch (enable) {
+	case 0:
+	{
+		/* Power Down Sequence */
+		err = tvp514x_write_reg(sd, REG_OPERATION_MODE, 0x01);
+		if (err) {
+			v4l2_err(sd, "Unable to turn off decoder\n");
+			return err;
+		}
+		decoder->streaming = enable;
 		break;
+	}
+	case 1:
+	{
+		struct tvp514x_reg *int_seq = (struct tvp514x_reg *)
+				client->driver->id_table->driver_data;
 
-	case V4L2_POWER_ON:
-		/* Enable mux for TVP5146/47 decoder data path */
-		if ((decoder->pdata->power_set) &&
-				(decoder->state == STATE_NOT_DETECTED)) {
-			int i;
-			struct tvp514x_init_seq *int_seq =
-				(struct tvp514x_init_seq *)
-				decoder->id->driver_data;
-
-			err = decoder->pdata->power_set(on);
-
-			/* Power Up Sequence */
-			for (i = 0; i < int_seq->no_regs; i++) {
-				err |= tvp514x_write_reg(decoder->client,
-						int_seq->init_reg_seq[i].reg,
-						int_seq->init_reg_seq[i].val);
-			}
-			/* Detect the sensor is not already detected */
-			err |= tvp514x_detect(decoder);
-			if (err) {
-				v4l_err(decoder->client,
-						"Unable to detect decoder\n");
-				return err;
-			}
+		/* Power Up Sequence */
+		err = tvp514x_write_regs(sd, int_seq);
+		if (err) {
+			v4l2_err(sd, "Unable to turn on decoder\n");
+			return err;
+		}
+		/* Detect if not already detected */
+		err = tvp514x_detect(sd, decoder);
+		if (err) {
+			v4l2_err(sd, "Unable to detect decoder\n");
+			return err;
 		}
-		err |= tvp514x_configure(decoder);
+		err = tvp514x_configure(sd, decoder);
+		if (err) {
+			v4l2_err(sd, "Unable to configure decoder\n");
+			return err;
+		}
+		decoder->streaming = enable;
 		break;
-
+	}
 	default:
 		err = -ENODEV;
 		break;
@@ -1269,93 +1186,37 @@ static int ioctl_s_power(struct v4l2_int_device *s, enum v4l2_power on)
 	return err;
 }
 
-/**
- * ioctl_init - V4L2 decoder interface handler for VIDIOC_INT_INIT
- * @s: pointer to standard V4L2 device structure
- *
- * Initialize the decoder device (calls tvp514x_configure())
- */
-static int ioctl_init(struct v4l2_int_device *s)
-{
-	struct tvp514x_decoder *decoder = s->priv;
-
-	/* Set default standard to auto */
-	decoder->tvp514x_regs[REG_VIDEO_STD].val =
-	    VIDEO_STD_AUTO_SWITCH_BIT;
-
-	return tvp514x_configure(decoder);
-}
-
-/**
- * ioctl_dev_exit - V4L2 decoder interface handler for vidioc_int_dev_exit_num
- * @s: pointer to standard V4L2 device structure
- *
- * Delinitialise the dev. at slave detach. The complement of ioctl_dev_init.
- */
-static int ioctl_dev_exit(struct v4l2_int_device *s)
-{
-	return 0;
-}
-
-/**
- * ioctl_dev_init - V4L2 decoder interface handler for vidioc_int_dev_init_num
- * @s: pointer to standard V4L2 device structure
- *
- * Initialise the device when slave attaches to the master. Returns 0 if
- * TVP5146/47 device could be found, otherwise returns appropriate error.
- */
-static int ioctl_dev_init(struct v4l2_int_device *s)
-{
-	struct tvp514x_decoder *decoder = s->priv;
-	int err;
-
-	err = tvp514x_detect(decoder);
-	if (err < 0) {
-		v4l_err(decoder->client,
-			"Unable to detect decoder\n");
-		return err;
-	}
-
-	v4l_info(decoder->client,
-		 "chip version 0x%.2x detected\n", decoder->ver);
+static const struct v4l2_subdev_core_ops tvp514x_core_ops = {
+	.queryctrl = tvp514x_queryctrl,
+	.g_ctrl = tvp514x_g_ctrl,
+	.s_ctrl = tvp514x_s_ctrl,
+	.s_std = tvp514x_s_std,
+};
 
-	return 0;
-}
+static const struct v4l2_subdev_video_ops tvp514x_video_ops = {
+	.s_routing = tvp514x_s_routing,
+	.querystd = tvp514x_querystd,
+	.enum_fmt = tvp514x_enum_fmt_cap,
+	.g_fmt = tvp514x_g_fmt_cap,
+	.try_fmt = tvp514x_try_fmt_cap,
+	.s_fmt = tvp514x_s_fmt_cap,
+	.g_parm = tvp514x_g_parm,
+	.s_parm = tvp514x_s_parm,
+	.s_stream = tvp514x_s_stream,
+};
 
-static struct v4l2_int_ioctl_desc tvp514x_ioctl_desc[] = {
-	{vidioc_int_dev_init_num, (v4l2_int_ioctl_func*) ioctl_dev_init},
-	{vidioc_int_dev_exit_num, (v4l2_int_ioctl_func*) ioctl_dev_exit},
-	{vidioc_int_s_power_num, (v4l2_int_ioctl_func*) ioctl_s_power},
-	{vidioc_int_g_priv_num, (v4l2_int_ioctl_func*) ioctl_g_priv},
-	{vidioc_int_g_ifparm_num, (v4l2_int_ioctl_func*) ioctl_g_ifparm},
-	{vidioc_int_init_num, (v4l2_int_ioctl_func*) ioctl_init},
-	{vidioc_int_enum_fmt_cap_num,
-	 (v4l2_int_ioctl_func *) ioctl_enum_fmt_cap},
-	{vidioc_int_try_fmt_cap_num,
-	 (v4l2_int_ioctl_func *) ioctl_try_fmt_cap},
-	{vidioc_int_g_fmt_cap_num,
-	 (v4l2_int_ioctl_func *) ioctl_g_fmt_cap},
-	{vidioc_int_s_fmt_cap_num,
-	 (v4l2_int_ioctl_func *) ioctl_s_fmt_cap},
-	{vidioc_int_g_parm_num, (v4l2_int_ioctl_func *) ioctl_g_parm},
-	{vidioc_int_s_parm_num, (v4l2_int_ioctl_func *) ioctl_s_parm},
-	{vidioc_int_queryctrl_num,
-	 (v4l2_int_ioctl_func *) ioctl_queryctrl},
-	{vidioc_int_g_ctrl_num, (v4l2_int_ioctl_func *) ioctl_g_ctrl},
-	{vidioc_int_s_ctrl_num, (v4l2_int_ioctl_func *) ioctl_s_ctrl},
-	{vidioc_int_querystd_num, (v4l2_int_ioctl_func *) ioctl_querystd},
-	{vidioc_int_s_std_num, (v4l2_int_ioctl_func *) ioctl_s_std},
-	{vidioc_int_s_video_routing_num,
-		(v4l2_int_ioctl_func *) ioctl_s_routing},
+static const struct v4l2_subdev_ops tvp514x_ops = {
+	.core = &tvp514x_core_ops,
+	.video = &tvp514x_video_ops,
 };
 
 static struct tvp514x_decoder tvp514x_dev = {
-	.state = STATE_NOT_DETECTED,
+	.streaming = 0,
 
 	.fmt_list = tvp514x_fmt_list,
 	.num_fmts = ARRAY_SIZE(tvp514x_fmt_list),
 
-	.pix = {		/* Default to NTSC 8-bit YUV 422 */
+	.pix = {/* Default to NTSC 8-bit YUV 422 */
 		.width = NTSC_NUM_ACTIVE_PIXELS,
 		.height = NTSC_NUM_ACTIVE_LINES,
 		.pixelformat = V4L2_PIX_FMT_UYVY,
@@ -1369,20 +1230,13 @@ static struct tvp514x_decoder tvp514x_dev = {
 	.current_std = STD_NTSC_MJ,
 	.std_list = tvp514x_std_list,
 	.num_stds = ARRAY_SIZE(tvp514x_std_list),
-	.v4l2_int_device = {
-		.module = THIS_MODULE,
-		.name = TVP514X_MODULE_NAME,
-		.type = v4l2_int_type_slave,
-	},
-	.tvp514x_slave = {
-		.ioctls = tvp514x_ioctl_desc,
-		.num_ioctls = ARRAY_SIZE(tvp514x_ioctl_desc),
-	},
+
 };
 
-/**
+/*
  * tvp514x_probe - decoder driver i2c probe handler
  * @client: i2c driver client device structure
+ * @id: i2c driver id table
  *
  * Register decoder as an i2c client device and V4L2
  * device.
@@ -1391,82 +1245,71 @@ static int
 tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id)
 {
 	struct tvp514x_decoder *decoder;
-	int err;
+	struct v4l2_subdev *sd;
 
 	/* Check if the adapter supports the needed features */
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 		return -EIO;
 
+	if (!client->dev.platform_data) {
+		v4l2_err(client, "No platform data!!\n");
+		return -ENODEV;
+	}
+
 	decoder = kzalloc(sizeof(*decoder), GFP_KERNEL);
 	if (!decoder)
 		return -ENOMEM;
 
-	if (!client->dev.platform_data) {
-		v4l_err(client, "No platform data!!\n");
-		err = -ENODEV;
-		goto out_free;
-	}
-
+	/*
+	 * Initialize the tvp514x_decoder with default configuration
+	 */
 	*decoder = tvp514x_dev;
-	decoder->v4l2_int_device.priv = decoder;
-	decoder->pdata = client->dev.platform_data;
-	decoder->v4l2_int_device.u.slave = &decoder->tvp514x_slave;
+	/* Copy default register configuration */
 	memcpy(decoder->tvp514x_regs, tvp514x_reg_list_default,
 			sizeof(tvp514x_reg_list_default));
+
+	/*
+	 * Copy board specific information here
+	 */
+	decoder->pdata = client->dev.platform_data;
+
 	/*
 	 * Fetch platform specific data, and configure the
 	 * tvp514x_reg_list[] accordingly. Since this is one
 	 * time configuration, no need to preserve.
 	 */
 	decoder->tvp514x_regs[REG_OUTPUT_FORMATTER2].val |=
-			(decoder->pdata->clk_polarity << 1);
+		(decoder->pdata->clk_polarity << 1);
 	decoder->tvp514x_regs[REG_SYNC_CONTROL].val |=
-			((decoder->pdata->hs_polarity << 2) |
-			(decoder->pdata->vs_polarity << 3));
-	/*
-	 * Save the id data, required for power up sequence
-	 */
-	decoder->id = (struct i2c_device_id *)id;
-	/* Attach to Master */
-	strcpy(decoder->v4l2_int_device.u.slave->attach_to,
-			decoder->pdata->master);
-	decoder->client = client;
-	i2c_set_clientdata(client, decoder);
+		((decoder->pdata->hs_polarity << 2) |
+		 (decoder->pdata->vs_polarity << 3));
+	/* Set default standard to auto */
+	decoder->tvp514x_regs[REG_VIDEO_STD].val =
+		VIDEO_STD_AUTO_SWITCH_BIT;
 
 	/* Register with V4L2 layer as slave device */
-	err = v4l2_int_device_register(&decoder->v4l2_int_device);
-	if (err) {
-		i2c_set_clientdata(client, NULL);
-		v4l_err(client,
-			"Unable to register to v4l2. Err[%d]\n", err);
-		goto out_free;
-
-	} else
-		v4l_info(client, "Registered to v4l2 master %s!!\n",
-				decoder->pdata->master);
+	sd = &decoder->sd;
+	v4l2_i2c_subdev_init(sd, client, &tvp514x_ops);
+
+	v4l2_info(sd, "%s decoder driver registered !!\n", sd->name);
+
 	return 0;
 
-out_free:
-	kfree(decoder);
-	return err;
 }
 
-/**
+/*
  * tvp514x_remove - decoder driver i2c remove handler
  * @client: i2c driver client device structure
  *
  * Unregister decoder as an i2c client device and V4L2
  * device. Complement of tvp514x_probe().
  */
-static int __exit tvp514x_remove(struct i2c_client *client)
+static int tvp514x_remove(struct i2c_client *client)
 {
-	struct tvp514x_decoder *decoder = i2c_get_clientdata(client);
-
-	if (!client->adapter)
-		return -ENODEV;	/* our client isn't attached */
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct tvp514x_decoder *decoder = to_decoder(sd);
 
-	v4l2_int_device_unregister(&decoder->v4l2_int_device);
-	i2c_set_clientdata(client, NULL);
+	v4l2_device_unregister_subdev(sd);
 	kfree(decoder);
 	return 0;
 }
@@ -1485,11 +1328,9 @@ static const struct tvp514x_reg tvp5146_init_reg_seq[] = {
 	{TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x00},
 	{TOK_WRITE, REG_OPERATION_MODE, 0x01},
 	{TOK_WRITE, REG_OPERATION_MODE, 0x00},
+	{TOK_TERM, 0, 0},
 };
-static const struct tvp514x_init_seq tvp5146_init = {
-	.no_regs = ARRAY_SIZE(tvp5146_init_reg_seq),
-	.init_reg_seq = tvp5146_init_reg_seq,
-};
+
 /*
  * TVP5147 Init/Power on Sequence
  */
@@ -1512,22 +1353,18 @@ static const struct tvp514x_reg tvp5147_init_reg_seq[] =	{
 	{TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x00},
 	{TOK_WRITE, REG_OPERATION_MODE, 0x01},
 	{TOK_WRITE, REG_OPERATION_MODE, 0x00},
+	{TOK_TERM, 0, 0},
 };
-static const struct tvp514x_init_seq tvp5147_init = {
-	.no_regs = ARRAY_SIZE(tvp5147_init_reg_seq),
-	.init_reg_seq = tvp5147_init_reg_seq,
-};
+
 /*
  * TVP5146M2/TVP5147M1 Init/Power on Sequence
  */
 static const struct tvp514x_reg tvp514xm_init_reg_seq[] = {
 	{TOK_WRITE, REG_OPERATION_MODE, 0x01},
 	{TOK_WRITE, REG_OPERATION_MODE, 0x00},
+	{TOK_TERM, 0, 0},
 };
-static const struct tvp514x_init_seq tvp514xm_init = {
-	.no_regs = ARRAY_SIZE(tvp514xm_init_reg_seq),
-	.init_reg_seq = tvp514xm_init_reg_seq,
-};
+
 /*
  * I2C Device Table -
  *
@@ -1535,48 +1372,34 @@ static const struct tvp514x_init_seq tvp514xm_init = {
  * driver_data - Driver data
  */
 static const struct i2c_device_id tvp514x_id[] = {
-	{"tvp5146", (unsigned long)&tvp5146_init},
-	{"tvp5146m2", (unsigned long)&tvp514xm_init},
-	{"tvp5147", (unsigned long)&tvp5147_init},
-	{"tvp5147m1", (unsigned long)&tvp514xm_init},
+	{"tvp5146", (unsigned long)tvp5146_init_reg_seq},
+	{"tvp5146m2", (unsigned long)tvp514xm_init_reg_seq},
+	{"tvp5147", (unsigned long)tvp5147_init_reg_seq},
+	{"tvp5147m1", (unsigned long)tvp514xm_init_reg_seq},
 	{},
 };
 
 MODULE_DEVICE_TABLE(i2c, tvp514x_id);
 
-static struct i2c_driver tvp514x_i2c_driver = {
+static struct i2c_driver tvp514x_driver = {
 	.driver = {
-		   .name = TVP514X_MODULE_NAME,
-		   .owner = THIS_MODULE,
-		   },
+		.owner = THIS_MODULE,
+		.name = TVP514X_MODULE_NAME,
+	},
 	.probe = tvp514x_probe,
-	.remove = __exit_p(tvp514x_remove),
+	.remove = tvp514x_remove,
 	.id_table = tvp514x_id,
 };
 
-/**
- * tvp514x_init
- *
- * Module init function
- */
 static int __init tvp514x_init(void)
 {
-	return i2c_add_driver(&tvp514x_i2c_driver);
+	return i2c_add_driver(&tvp514x_driver);
 }
 
-/**
- * tvp514x_cleanup
- *
- * Module exit function
- */
-static void __exit tvp514x_cleanup(void)
+static void __exit tvp514x_exit(void)
 {
-	i2c_del_driver(&tvp514x_i2c_driver);
+	i2c_del_driver(&tvp514x_driver);
 }
 
 module_init(tvp514x_init);
-module_exit(tvp514x_cleanup);
-
-MODULE_AUTHOR("Texas Instruments");
-MODULE_DESCRIPTION("TVP514X linux decoder driver");
-MODULE_LICENSE("GPL");
+module_exit(tvp514x_exit);
diff --git a/drivers/media/video/tvp514x_regs.h b/drivers/media/video/tvp514x_regs.h
index 351620aeecc..18f29ad0dfe 100644
--- a/drivers/media/video/tvp514x_regs.h
+++ b/drivers/media/video/tvp514x_regs.h
@@ -284,14 +284,4 @@ struct tvp514x_reg {
 	u32 val;
 };
 
-/**
- * struct tvp514x_init_seq - Structure for TVP5146/47/46M2/47M1 power up
- *		Sequence.
- * @ no_regs - Number of registers to write for power up sequence.
- * @ init_reg_seq - Array of registers and respective value to write.
- */
-struct tvp514x_init_seq {
-	unsigned int no_regs;
-	const struct tvp514x_reg *init_reg_seq;
-};
 #endif				/* ifndef _TVP514X_REGS_H */
-- 
cgit v1.2.3


From c1c9d09cd368f75bbd10253b8266898fb9fecc7f Mon Sep 17 00:00:00 2001
From: Muralidharan Karicheri <m-karicheri2@ti.com>
Date: Wed, 1 Jul 2009 04:20:43 -0300
Subject: V4L/DVB (12247): tvp514x: formatting comments as per kernel
 documentation

Fix documentation style based on comments from Mauro.

Reviewed by: Hans Verkuil <hverkuil@xs4all.nl>

Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/tvp514x.c | 275 ++++++++++++++++++++++++------------------
 1 file changed, 157 insertions(+), 118 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/tvp514x.c b/drivers/media/video/tvp514x.c
index c8386e2f7a9..244372627df 100644
--- a/drivers/media/video/tvp514x.c
+++ b/drivers/media/video/tvp514x.c
@@ -56,16 +56,14 @@ MODULE_AUTHOR("Texas Instruments");
 MODULE_DESCRIPTION("TVP514X linux decoder driver");
 MODULE_LICENSE("GPL");
 
-/*
- * enum tvp514x_std - enum for supported standards
- */
+/* enum tvp514x_std - enum for supported standards */
 enum tvp514x_std {
 	STD_NTSC_MJ = 0,
 	STD_PAL_BDGHIN,
 	STD_INVALID
 };
 
-/*
+/**
  * struct tvp514x_std_info - Structure to store standard informations
  * @width: Line width in pixels
  * @height:Number of active lines
@@ -80,7 +78,7 @@ struct tvp514x_std_info {
 };
 
 static struct tvp514x_reg tvp514x_reg_list_default[0x40];
-/*
+/**
  * struct tvp514x_decoder - TVP5146/47 decoder object
  * @sd: Subdevice Slave handle
  * @tvp514x_regs: copy of hw's regs with preset values.
@@ -111,18 +109,18 @@ struct tvp514x_decoder {
 	enum tvp514x_std current_std;
 	int num_stds;
 	struct tvp514x_std_info *std_list;
-	/*
-	 * Input and Output Routing parameters
-	 */
+	/* Input and Output Routing parameters */
 	u32 input;
 	u32 output;
 };
 
 /* TVP514x default register values */
 static struct tvp514x_reg tvp514x_reg_list_default[] = {
-	{TOK_WRITE, REG_INPUT_SEL, 0x05},	/* Composite selected */
+	/* Composite selected */
+	{TOK_WRITE, REG_INPUT_SEL, 0x05},
 	{TOK_WRITE, REG_AFE_GAIN_CTRL, 0x0F},
-	{TOK_WRITE, REG_VIDEO_STD, 0x00},	/* Auto mode */
+	/* Auto mode */
+	{TOK_WRITE, REG_VIDEO_STD, 0x00},
 	{TOK_WRITE, REG_OPERATION_MODE, 0x00},
 	{TOK_SKIP, REG_AUTOSWITCH_MASK, 0x3F},
 	{TOK_WRITE, REG_COLOR_KILLER, 0x10},
@@ -135,53 +133,73 @@ static struct tvp514x_reg tvp514x_reg_list_default[] = {
 	{TOK_WRITE, REG_HUE, 0x00},
 	{TOK_WRITE, REG_CHROMA_CONTROL1, 0x00},
 	{TOK_WRITE, REG_CHROMA_CONTROL2, 0x0E},
-	{TOK_SKIP, 0x0F, 0x00},	/* Reserved */
+	/* Reserved */
+	{TOK_SKIP, 0x0F, 0x00},
 	{TOK_WRITE, REG_COMP_PR_SATURATION, 0x80},
 	{TOK_WRITE, REG_COMP_Y_CONTRAST, 0x80},
 	{TOK_WRITE, REG_COMP_PB_SATURATION, 0x80},
-	{TOK_SKIP, 0x13, 0x00},	/* Reserved */
+	/* Reserved */
+	{TOK_SKIP, 0x13, 0x00},
 	{TOK_WRITE, REG_COMP_Y_BRIGHTNESS, 0x80},
-	{TOK_SKIP, 0x15, 0x00},	/* Reserved */
-	{TOK_SKIP, REG_AVID_START_PIXEL_LSB, 0x55},	/* NTSC timing */
+	/* Reserved */
+	{TOK_SKIP, 0x15, 0x00},
+	/* NTSC timing */
+	{TOK_SKIP, REG_AVID_START_PIXEL_LSB, 0x55},
 	{TOK_SKIP, REG_AVID_START_PIXEL_MSB, 0x00},
 	{TOK_SKIP, REG_AVID_STOP_PIXEL_LSB, 0x25},
 	{TOK_SKIP, REG_AVID_STOP_PIXEL_MSB, 0x03},
-	{TOK_SKIP, REG_HSYNC_START_PIXEL_LSB, 0x00},	/* NTSC timing */
+	/* NTSC timing */
+	{TOK_SKIP, REG_HSYNC_START_PIXEL_LSB, 0x00},
 	{TOK_SKIP, REG_HSYNC_START_PIXEL_MSB, 0x00},
 	{TOK_SKIP, REG_HSYNC_STOP_PIXEL_LSB, 0x40},
 	{TOK_SKIP, REG_HSYNC_STOP_PIXEL_MSB, 0x00},
-	{TOK_SKIP, REG_VSYNC_START_LINE_LSB, 0x04},	/* NTSC timing */
+	/* NTSC timing */
+	{TOK_SKIP, REG_VSYNC_START_LINE_LSB, 0x04},
 	{TOK_SKIP, REG_VSYNC_START_LINE_MSB, 0x00},
 	{TOK_SKIP, REG_VSYNC_STOP_LINE_LSB, 0x07},
 	{TOK_SKIP, REG_VSYNC_STOP_LINE_MSB, 0x00},
-	{TOK_SKIP, REG_VBLK_START_LINE_LSB, 0x01},	/* NTSC timing */
+	/* NTSC timing */
+	{TOK_SKIP, REG_VBLK_START_LINE_LSB, 0x01},
 	{TOK_SKIP, REG_VBLK_START_LINE_MSB, 0x00},
 	{TOK_SKIP, REG_VBLK_STOP_LINE_LSB, 0x15},
 	{TOK_SKIP, REG_VBLK_STOP_LINE_MSB, 0x00},
-	{TOK_SKIP, 0x26, 0x00},	/* Reserved */
-	{TOK_SKIP, 0x27, 0x00},	/* Reserved */
+	/* Reserved */
+	{TOK_SKIP, 0x26, 0x00},
+	/* Reserved */
+	{TOK_SKIP, 0x27, 0x00},
 	{TOK_SKIP, REG_FAST_SWTICH_CONTROL, 0xCC},
-	{TOK_SKIP, 0x29, 0x00},	/* Reserved */
+	/* Reserved */
+	{TOK_SKIP, 0x29, 0x00},
 	{TOK_SKIP, REG_FAST_SWTICH_SCART_DELAY, 0x00},
-	{TOK_SKIP, 0x2B, 0x00},	/* Reserved */
+	/* Reserved */
+	{TOK_SKIP, 0x2B, 0x00},
 	{TOK_SKIP, REG_SCART_DELAY, 0x00},
 	{TOK_SKIP, REG_CTI_DELAY, 0x00},
 	{TOK_SKIP, REG_CTI_CONTROL, 0x00},
-	{TOK_SKIP, 0x2F, 0x00},	/* Reserved */
-	{TOK_SKIP, 0x30, 0x00},	/* Reserved */
-	{TOK_SKIP, 0x31, 0x00},	/* Reserved */
-	{TOK_WRITE, REG_SYNC_CONTROL, 0x00},	/* HS, VS active high */
-	{TOK_WRITE, REG_OUTPUT_FORMATTER1, 0x00},	/* 10-bit BT.656 */
-	{TOK_WRITE, REG_OUTPUT_FORMATTER2, 0x11},	/* Enable clk & data */
-	{TOK_WRITE, REG_OUTPUT_FORMATTER3, 0xEE},	/* Enable AVID & FLD */
-	{TOK_WRITE, REG_OUTPUT_FORMATTER4, 0xAF},	/* Enable VS & HS */
+	/* Reserved */
+	{TOK_SKIP, 0x2F, 0x00},
+	/* Reserved */
+	{TOK_SKIP, 0x30, 0x00},
+	/* Reserved */
+	{TOK_SKIP, 0x31, 0x00},
+	/* HS, VS active high */
+	{TOK_WRITE, REG_SYNC_CONTROL, 0x00},
+	/* 10-bit BT.656 */
+	{TOK_WRITE, REG_OUTPUT_FORMATTER1, 0x00},
+	/* Enable clk & data */
+	{TOK_WRITE, REG_OUTPUT_FORMATTER2, 0x11},
+	/* Enable AVID & FLD */
+	{TOK_WRITE, REG_OUTPUT_FORMATTER3, 0xEE},
+	/* Enable VS & HS */
+	{TOK_WRITE, REG_OUTPUT_FORMATTER4, 0xAF},
 	{TOK_WRITE, REG_OUTPUT_FORMATTER5, 0xFF},
 	{TOK_WRITE, REG_OUTPUT_FORMATTER6, 0xFF},
-	{TOK_WRITE, REG_CLEAR_LOST_LOCK, 0x01},	/* Clear status */
+	/* Clear status */
+	{TOK_WRITE, REG_CLEAR_LOST_LOCK, 0x01},
 	{TOK_TERM, 0, 0},
 };
 
-/*
+/**
  * List of image formats supported by TVP5146/47 decoder
  * Currently we are using 8 bit mode only, but can be
  * extended to 10/20 bit mode.
@@ -196,7 +214,7 @@ static const struct v4l2_fmtdesc tvp514x_fmt_list[] = {
 	},
 };
 
-/*
+/**
  * Supported standards -
  *
  * Currently supports two standards only, need to add support for rest of the
@@ -239,8 +257,11 @@ static inline struct tvp514x_decoder *to_decoder(struct v4l2_subdev *sd)
 }
 
 
-/*
- * Read a value from a register in an TVP5146/47 decoder device.
+/**
+ * tvp514x_read_reg() - Read a value from a register in an TVP5146/47.
+ * @sd: ptr to v4l2_subdev struct
+ * @reg: TVP5146/47 register address
+ *
  * Returns value read if successful, or non-zero (-1) otherwise.
  */
 static int tvp514x_read_reg(struct v4l2_subdev *sd, u8 reg)
@@ -263,6 +284,11 @@ read_again:
 	return err;
 }
 
+/**
+ * dump_reg() - dump the register content of TVP5146/47.
+ * @sd: ptr to v4l2_subdev struct
+ * @reg: TVP5146/47 register address
+ */
 static void dump_reg(struct v4l2_subdev *sd, u8 reg)
 {
 	u32 val;
@@ -271,7 +297,12 @@ static void dump_reg(struct v4l2_subdev *sd, u8 reg)
 	v4l2_info(sd, "Reg(0x%.2X): 0x%.2X\n", reg, val);
 }
 
-/*
+/**
+ * tvp514x_write_reg() - Write a value to a register in TVP5146/47
+ * @sd: ptr to v4l2_subdev struct
+ * @reg: TVP5146/47 register address
+ * @val: value to be written to the register
+ *
  * Write a value to a register in an TVP5146/47 decoder device.
  * Returns zero if successful, or non-zero otherwise.
  */
@@ -295,14 +326,16 @@ write_again:
 	return err;
 }
 
-/*
- * tvp514x_write_regs : Initializes a list of TVP5146/47 registers
+/**
+ * tvp514x_write_regs() : Initializes a list of TVP5146/47 registers
+ * @sd: ptr to v4l2_subdev struct
+ * @reglist: list of TVP5146/47 registers and values
+ *
+ * Initializes a list of TVP5146/47 registers:-
  *		if token is TOK_TERM, then entire write operation terminates
  *		if token is TOK_DELAY, then a delay of 'val' msec is introduced
  *		if token is TOK_SKIP, then the register write is skipped
  *		if token is TOK_WRITE, then the register write is performed
- *
- * reglist - list of registers to be written
  * Returns zero if successful, or non-zero otherwise.
  */
 static int tvp514x_write_regs(struct v4l2_subdev *sd,
@@ -329,9 +362,12 @@ static int tvp514x_write_regs(struct v4l2_subdev *sd,
 	return 0;
 }
 
-/*
- * tvp514x_get_current_std:
- * Returns the current standard detected by TVP5146/47
+/**
+ * tvp514x_get_current_std() : Get the current standard detected by TVP5146/47
+ * @sd: ptr to v4l2_subdev struct
+ *
+ * Get current standard detected by TVP5146/47, STD_INVALID if there is no
+ * standard detected.
  */
 static enum tvp514x_std tvp514x_get_current_std(struct v4l2_subdev *sd)
 {
@@ -342,7 +378,8 @@ static enum tvp514x_std tvp514x_get_current_std(struct v4l2_subdev *sd)
 		/* use the standard status register */
 		std_status = tvp514x_read_reg(sd, REG_VIDEO_STD_STATUS);
 	else
-		std_status = std;	/* use the standard register itself */
+		/* use the standard register itself */
+		std_status = std;
 
 	switch (std_status & VIDEO_STD_MASK) {
 	case VIDEO_STD_NTSC_MJ_BIT:
@@ -358,9 +395,7 @@ static enum tvp514x_std tvp514x_get_current_std(struct v4l2_subdev *sd)
 	return STD_INVALID;
 }
 
-/*
- * TVP5146/47 register dump function
- */
+/* TVP5146/47 register dump function */
 static void tvp514x_reg_dump(struct v4l2_subdev *sd)
 {
 	dump_reg(sd, REG_INPUT_SEL);
@@ -407,8 +442,11 @@ static void tvp514x_reg_dump(struct v4l2_subdev *sd)
 	dump_reg(sd, REG_CLEAR_LOST_LOCK);
 }
 
-/*
- * Configure the TVP5146/47 with the current register settings
+/**
+ * tvp514x_configure() - Configure the TVP5146/47 registers
+ * @sd: ptr to v4l2_subdev struct
+ * @decoder: ptr to tvp514x_decoder structure
+ *
  * Returns zero if successful, or non-zero otherwise.
  */
 static int tvp514x_configure(struct v4l2_subdev *sd,
@@ -428,8 +466,11 @@ static int tvp514x_configure(struct v4l2_subdev *sd,
 	return 0;
 }
 
-/*
- * Detect if an tvp514x is present, and if so which revision.
+/**
+ * tvp514x_detect() - Detect if an tvp514x is present, and if so which revision.
+ * @sd: pointer to standard V4L2 sub-device structure
+ * @decoder: pointer to tvp514x_decoder structure
+ *
  * A device is considered to be detected if the chip ID (LSB and MSB)
  * registers match the expected values.
  * Any value of the rom version register is accepted.
@@ -468,13 +509,8 @@ static int tvp514x_detect(struct v4l2_subdev *sd,
 	return 0;
 }
 
-/*
- * Following are decoder interface functions implemented by
- * TVP5146/47 decoder driver.
- */
-
-/*
- * tvp514x_querystd - V4L2 decoder interface handler for VIDIOC_QUERYSTD ioctl
+/**
+ * tvp514x_querystd() - V4L2 decoder interface handler for querystd
  * @sd: pointer to standard V4L2 sub-device structure
  * @std_id: standard V4L2 std_id ioctl enum
  *
@@ -546,8 +582,8 @@ static int tvp514x_querystd(struct v4l2_subdev *sd, v4l2_std_id *std_id)
 	return 0;
 }
 
-/*
- * tvp514x_s_std - V4L2 decoder interface handler for VIDIOC_S_STD ioctl
+/**
+ * tvp514x_s_std() - V4L2 decoder interface handler for s_std
  * @sd: pointer to standard V4L2 sub-device structure
  * @std_id: standard V4L2 v4l2_std_id ioctl enum
  *
@@ -580,10 +616,12 @@ static int tvp514x_s_std(struct v4l2_subdev *sd, v4l2_std_id std_id)
 	return 0;
 }
 
-/*
- * tvp514x_s_routing - V4L2 decoder interface handler for VIDIOC_S_INPUT ioctl
+/**
+ * tvp514x_s_routing() - V4L2 decoder interface handler for s_routing
  * @sd: pointer to standard V4L2 sub-device structure
- * @index: number of the input
+ * @input: input selector for routing the signal
+ * @output: output selector for routing the signal
+ * @config: config value. Not used
  *
  * If index is valid, selects the requested input. Otherwise, returns -EINVAL if
  * the input is not supported or there is no active signal present in the
@@ -602,7 +640,8 @@ static int tvp514x_s_routing(struct v4l2_subdev *sd,
 
 	if ((input >= INPUT_INVALID) ||
 			(output >= OUTPUT_INVALID))
-		return -EINVAL;	/* Index out of bound */
+		/* Index out of bound */
+		return -EINVAL;
 
 	input_sel = input;
 	output_sel = output;
@@ -659,7 +698,7 @@ static int tvp514x_s_routing(struct v4l2_subdev *sd,
 		lock_mask = STATUS_HORZ_SYNC_LOCK_BIT |
 			STATUS_VIRT_SYNC_LOCK_BIT;
 		break;
-	/*Need to add other interfaces*/
+	/* Need to add other interfaces*/
 	default:
 		return -EINVAL;
 	}
@@ -676,7 +715,8 @@ static int tvp514x_s_routing(struct v4l2_subdev *sd,
 		sync_lock_status = tvp514x_read_reg(sd,
 				REG_STATUS1);
 		if (lock_mask == (sync_lock_status & lock_mask))
-			break;	/* Input detected */
+			/* Input detected */
+			break;
 	}
 
 	if ((current_std == STD_INVALID) || (try_count < 0))
@@ -692,8 +732,8 @@ static int tvp514x_s_routing(struct v4l2_subdev *sd,
 	return 0;
 }
 
-/*
- * tvp514x_queryctrl - V4L2 decoder interface handler for VIDIOC_QUERYCTRL ioctl
+/**
+ * tvp514x_queryctrl() - V4L2 decoder interface handler for queryctrl
  * @sd: pointer to standard V4L2 sub-device structure
  * @qctrl: standard V4L2 v4l2_queryctrl structure
  *
@@ -710,13 +750,13 @@ tvp514x_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qctrl)
 
 	switch (qctrl->id) {
 	case V4L2_CID_BRIGHTNESS:
-		/* Brightness supported is (0-255),
-		 */
+		/* Brightness supported is (0-255), */
 		err = v4l2_ctrl_query_fill(qctrl, 0, 255, 1, 128);
 		break;
 	case V4L2_CID_CONTRAST:
 	case V4L2_CID_SATURATION:
-		/* Saturation and Contrast supported is -
+		/**
+		 * Saturation and Contrast supported is -
 		 *	Contrast: 0 - 255 (Default - 128)
 		 *	Saturation: 0 - 255 (Default - 128)
 		 */
@@ -729,7 +769,7 @@ tvp514x_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qctrl)
 		err = v4l2_ctrl_query_fill(qctrl, -180, 180, 180, 0);
 		break;
 	case V4L2_CID_AUTOGAIN:
-		/*
+		/**
 		 * Auto Gain supported is -
 		 * 	0 - 1 (Default - 1)
 		 */
@@ -747,8 +787,8 @@ tvp514x_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qctrl)
 	return err;
 }
 
-/*
- * tvp514x_g_ctrl - V4L2 decoder interface handler for VIDIOC_G_CTRL ioctl
+/**
+ * tvp514x_g_ctrl() - V4L2 decoder interface handler for g_ctrl
  * @sd: pointer to standard V4L2 sub-device structure
  * @ctrl: pointer to v4l2_control structure
  *
@@ -802,8 +842,8 @@ tvp514x_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 	return 0;
 }
 
-/*
- * tvp514x_s_ctrl - V4L2 decoder interface handler for VIDIOC_S_CTRL ioctl
+/**
+ * tvp514x_s_ctrl() - V4L2 decoder interface handler for s_ctrl
  * @sd: pointer to standard V4L2 sub-device structure
  * @ctrl: pointer to v4l2_control structure
  *
@@ -903,8 +943,8 @@ tvp514x_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 	return err;
 }
 
-/*
- * tvp514x_enum_fmt_cap - Implement the CAPTURE buffer VIDIOC_ENUM_FMT ioctl
+/**
+ * tvp514x_enum_fmt_cap() - V4L2 decoder interface handler for enum_fmt
  * @sd: pointer to standard V4L2 sub-device structure
  * @fmt: standard V4L2 VIDIOC_ENUM_FMT ioctl structure
  *
@@ -921,10 +961,12 @@ tvp514x_enum_fmt_cap(struct v4l2_subdev *sd, struct v4l2_fmtdesc *fmt)
 
 	index = fmt->index;
 	if ((index >= decoder->num_fmts) || (index < 0))
-		return -EINVAL;	/* Index out of bound */
+		/* Index out of bound */
+		return -EINVAL;
 
 	if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;	/* only capture is supported */
+		/* only capture is supported */
+		return -EINVAL;
 
 	memcpy(fmt, &decoder->fmt_list[index],
 		sizeof(struct v4l2_fmtdesc));
@@ -935,8 +977,8 @@ tvp514x_enum_fmt_cap(struct v4l2_subdev *sd, struct v4l2_fmtdesc *fmt)
 	return 0;
 }
 
-/*
- * tvp514x_try_fmt_cap - Implement the CAPTURE buffer VIDIOC_TRY_FMT ioctl
+/**
+ * tvp514x_try_fmt_cap() - V4L2 decoder interface handler for try_fmt
  * @sd: pointer to standard V4L2 sub-device structure
  * @f: pointer to standard V4L2 VIDIOC_TRY_FMT ioctl structure
  *
@@ -956,6 +998,7 @@ tvp514x_try_fmt_cap(struct v4l2_subdev *sd, struct v4l2_format *f)
 		return -EINVAL;
 
 	if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		/* only capture is supported */
 		f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
 
 	pix = &f->fmt.pix;
@@ -975,7 +1018,8 @@ tvp514x_try_fmt_cap(struct v4l2_subdev *sd, struct v4l2_format *f)
 			break;
 	}
 	if (ifmt == decoder->num_fmts)
-		ifmt = 0;	/* None of the format matched, select default */
+		/* None of the format matched, select default */
+		ifmt = 0;
 	pix->pixelformat = decoder->fmt_list[ifmt].pixelformat;
 
 	pix->field = V4L2_FIELD_INTERLACED;
@@ -991,8 +1035,8 @@ tvp514x_try_fmt_cap(struct v4l2_subdev *sd, struct v4l2_format *f)
 	return 0;
 }
 
-/*
- * tvp514x_s_fmt_cap - V4L2 decoder interface handler for VIDIOC_S_FMT ioctl
+/**
+ * tvp514x_s_fmt_cap() - V4L2 decoder interface handler for s_fmt
  * @sd: pointer to standard V4L2 sub-device structure
  * @f: pointer to standard V4L2 VIDIOC_S_FMT ioctl structure
  *
@@ -1011,7 +1055,8 @@ tvp514x_s_fmt_cap(struct v4l2_subdev *sd, struct v4l2_format *f)
 		return -EINVAL;
 
 	if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;	/* only capture is supported */
+		/* only capture is supported */
+		return -EINVAL;
 
 	pix = &f->fmt.pix;
 	rval = tvp514x_try_fmt_cap(sd, f);
@@ -1023,8 +1068,8 @@ tvp514x_s_fmt_cap(struct v4l2_subdev *sd, struct v4l2_format *f)
 	return rval;
 }
 
-/*
- * tvp514x_g_fmt_cap - V4L2 decoder interface handler for tvp514x_g_fmt_cap
+/**
+ * tvp514x_g_fmt_cap() - V4L2 decoder interface handler for tvp514x_g_fmt_cap
  * @sd: pointer to standard V4L2 sub-device structure
  * @f: pointer to standard V4L2 v4l2_format structure
  *
@@ -1040,7 +1085,8 @@ tvp514x_g_fmt_cap(struct v4l2_subdev *sd, struct v4l2_format *f)
 		return -EINVAL;
 
 	if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;	/* only capture is supported */
+		/* only capture is supported */
+		return -EINVAL;
 
 	f->fmt.pix = decoder->pix;
 
@@ -1051,8 +1097,8 @@ tvp514x_g_fmt_cap(struct v4l2_subdev *sd, struct v4l2_format *f)
 	return 0;
 }
 
-/*
- * tvp514x_g_parm - V4L2 decoder interface handler for VIDIOC_G_PARM ioctl
+/**
+ * tvp514x_g_parm() - V4L2 decoder interface handler for g_parm
  * @sd: pointer to standard V4L2 sub-device structure
  * @a: pointer to standard V4L2 VIDIOC_G_PARM ioctl structure
  *
@@ -1069,7 +1115,8 @@ tvp514x_g_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *a)
 		return -EINVAL;
 
 	if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;	/* only capture is supported */
+		/* only capture is supported */
+		return -EINVAL;
 
 	memset(a, 0, sizeof(*a));
 	a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
@@ -1089,8 +1136,8 @@ tvp514x_g_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *a)
 	return 0;
 }
 
-/*
- * tvp514x_s_parm - V4L2 decoder interface handler for VIDIOC_S_PARM ioctl
+/**
+ * tvp514x_s_parm() - V4L2 decoder interface handler for s_parm
  * @sd: pointer to standard V4L2 sub-device structure
  * @a: pointer to standard V4L2 VIDIOC_S_PARM ioctl structure
  *
@@ -1108,7 +1155,8 @@ tvp514x_s_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *a)
 		return -EINVAL;
 
 	if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;	/* only capture is supported */
+		/* only capture is supported */
+		return -EINVAL;
 
 	timeperframe = &a->parm.capture.timeperframe;
 
@@ -1125,8 +1173,8 @@ tvp514x_s_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *a)
 	return 0;
 }
 
-/*
- * tvp514x_s_stream - V4L2 decoder interface handler for vidioc_int_s_power_num
+/**
+ * tvp514x_s_stream() - V4L2 decoder i/f handler for s_stream
  * @sd: pointer to standard V4L2 sub-device structure
  * @enable: streaming enable or disable
  *
@@ -1216,7 +1264,8 @@ static struct tvp514x_decoder tvp514x_dev = {
 	.fmt_list = tvp514x_fmt_list,
 	.num_fmts = ARRAY_SIZE(tvp514x_fmt_list),
 
-	.pix = {/* Default to NTSC 8-bit YUV 422 */
+	.pix = {
+		/* Default to NTSC 8-bit YUV 422 */
 		.width = NTSC_NUM_ACTIVE_PIXELS,
 		.height = NTSC_NUM_ACTIVE_LINES,
 		.pixelformat = V4L2_PIX_FMT_UYVY,
@@ -1233,8 +1282,8 @@ static struct tvp514x_decoder tvp514x_dev = {
 
 };
 
-/*
- * tvp514x_probe - decoder driver i2c probe handler
+/**
+ * tvp514x_probe() - decoder driver i2c probe handler
  * @client: i2c driver client device structure
  * @id: i2c driver id table
  *
@@ -1260,20 +1309,16 @@ tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	if (!decoder)
 		return -ENOMEM;
 
-	/*
-	 * Initialize the tvp514x_decoder with default configuration
-	 */
+	/* Initialize the tvp514x_decoder with default configuration */
 	*decoder = tvp514x_dev;
 	/* Copy default register configuration */
 	memcpy(decoder->tvp514x_regs, tvp514x_reg_list_default,
 			sizeof(tvp514x_reg_list_default));
 
-	/*
-	 * Copy board specific information here
-	 */
+	/* Copy board specific information here */
 	decoder->pdata = client->dev.platform_data;
 
-	/*
+	/**
 	 * Fetch platform specific data, and configure the
 	 * tvp514x_reg_list[] accordingly. Since this is one
 	 * time configuration, no need to preserve.
@@ -1297,8 +1342,8 @@ tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id)
 
 }
 
-/*
- * tvp514x_remove - decoder driver i2c remove handler
+/**
+ * tvp514x_remove() - decoder driver i2c remove handler
  * @client: i2c driver client device structure
  *
  * Unregister decoder as an i2c client device and V4L2
@@ -1313,9 +1358,7 @@ static int tvp514x_remove(struct i2c_client *client)
 	kfree(decoder);
 	return 0;
 }
-/*
- * TVP5146 Init/Power on Sequence
- */
+/* TVP5146 Init/Power on Sequence */
 static const struct tvp514x_reg tvp5146_init_reg_seq[] = {
 	{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x02},
 	{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00},
@@ -1331,9 +1374,7 @@ static const struct tvp514x_reg tvp5146_init_reg_seq[] = {
 	{TOK_TERM, 0, 0},
 };
 
-/*
- * TVP5147 Init/Power on Sequence
- */
+/* TVP5147 Init/Power on Sequence */
 static const struct tvp514x_reg tvp5147_init_reg_seq[] =	{
 	{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x02},
 	{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00},
@@ -1356,16 +1397,14 @@ static const struct tvp514x_reg tvp5147_init_reg_seq[] =	{
 	{TOK_TERM, 0, 0},
 };
 
-/*
- * TVP5146M2/TVP5147M1 Init/Power on Sequence
- */
+/* TVP5146M2/TVP5147M1 Init/Power on Sequence */
 static const struct tvp514x_reg tvp514xm_init_reg_seq[] = {
 	{TOK_WRITE, REG_OPERATION_MODE, 0x01},
 	{TOK_WRITE, REG_OPERATION_MODE, 0x00},
 	{TOK_TERM, 0, 0},
 };
 
-/*
+/**
  * I2C Device Table -
  *
  * name - Name of the actual device/chip.
-- 
cgit v1.2.3


From 7da8a6cb3e5b60e73b196f1c71031423e0791032 Mon Sep 17 00:00:00 2001
From: Muralidharan Karicheri <m-karicheri2@ti.com>
Date: Mon, 6 Jul 2009 15:04:12 -0300
Subject: V4L/DVB (12248): v4l: vpfe capture bridge driver for DM355 and DM6446

This the vpfe capture bridge driver for doing video
capture on DM355 and DM6446 evms. The ccdc hw modules register with the
driver and are used for configuring the CCD Controller for a specific
decoder interface. The driver also registers the sub devices required
for a specific evm. More than one sub devices can be registered.
This allows driver to switch dynamically to capture video from
any sub device that is registered. Currently only one sub device
(tvp5146) is supported. But in future this driver is expected
to do capture from sensor devices such as Micron's MT9T001, MT9T031
and MT9P031 etc. The driver currently supports MMAP based IO.

Reviewed by: Laurent Pinchart <laurent.pinchart@skynet.be>
Reviewed by: Alexey Klimov <klimov.linux@gmail.com>

Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/davinci/vpfe_capture.c | 2124 ++++++++++++++++++++++++++++
 1 file changed, 2124 insertions(+)
 create mode 100644 drivers/media/video/davinci/vpfe_capture.c

(limited to 'drivers/media')

diff --git a/drivers/media/video/davinci/vpfe_capture.c b/drivers/media/video/davinci/vpfe_capture.c
new file mode 100644
index 00000000000..402ce43ef38
--- /dev/null
+++ b/drivers/media/video/davinci/vpfe_capture.c
@@ -0,0 +1,2124 @@
+/*
+ * Copyright (C) 2008-2009 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ * Driver name : VPFE Capture driver
+ *    VPFE Capture driver allows applications to capture and stream video
+ *    frames on DaVinci SoCs (DM6446, DM355 etc) from a YUV source such as
+ *    TVP5146 or  Raw Bayer RGB image data from an image sensor
+ *    such as Microns' MT9T001, MT9T031 etc.
+ *
+ *    These SoCs have, in common, a Video Processing Subsystem (VPSS) that
+ *    consists of a Video Processing Front End (VPFE) for capturing
+ *    video/raw image data and Video Processing Back End (VPBE) for displaying
+ *    YUV data through an in-built analog encoder or Digital LCD port. This
+ *    driver is for capture through VPFE. A typical EVM using these SoCs have
+ *    following high level configuration.
+ *
+ *
+ *    decoder(TVP5146/		YUV/
+ * 	     MT9T001)   -->  Raw Bayer RGB ---> MUX -> VPFE (CCDC/ISIF)
+ *    				data input              |      |
+ *							V      |
+ *						      SDRAM    |
+ *							       V
+ *							   Image Processor
+ *							       |
+ *							       V
+ *							     SDRAM
+ *    The data flow happens from a decoder connected to the VPFE over a
+ *    YUV embedded (BT.656/BT.1120) or separate sync or raw bayer rgb interface
+ *    and to the input of VPFE through an optional MUX (if more inputs are
+ *    to be interfaced on the EVM). The input data is first passed through
+ *    CCDC (CCD Controller, a.k.a Image Sensor Interface, ISIF). The CCDC
+ *    does very little or no processing on YUV data and does pre-process Raw
+ *    Bayer RGB data through modules such as Defect Pixel Correction (DFC)
+ *    Color Space Conversion (CSC), data gain/offset etc. After this, data
+ *    can be written to SDRAM or can be connected to the image processing
+ *    block such as IPIPE (on DM355 only).
+ *
+ *    Features supported
+ *  		- MMAP IO
+ *		- Capture using TVP5146 over BT.656
+ *		- support for interfacing decoders using sub device model
+ *		- Work with DM355 or DM6446 CCDC to do Raw Bayer RGB/YUV
+ *		  data capture to SDRAM.
+ *    TODO list
+ *		- Support multiple REQBUF after open
+ *		- Support for de-allocating buffers through REQBUF
+ *		- Support for Raw Bayer RGB capture
+ *		- Support for chaining Image Processor
+ *		- Support for static allocation of buffers
+ *		- Support for USERPTR IO
+ *		- Support for STREAMON before QBUF
+ *		- Support for control ioctls
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/version.h>
+#include <media/v4l2-common.h>
+#include <linux/io.h>
+#include <media/davinci/vpfe_capture.h>
+#include "ccdc_hw_device.h"
+
+static int debug;
+static u32 numbuffers = 3;
+static u32 bufsize = (720 * 576 * 2);
+
+module_param(numbuffers, uint, S_IRUGO);
+module_param(bufsize, uint, S_IRUGO);
+module_param(debug, int, 0644);
+
+MODULE_PARM_DESC(numbuffers, "buffer count (default:3)");
+MODULE_PARM_DESC(bufsize, "buffer size in bytes (default:720 x 576 x 2)");
+MODULE_PARM_DESC(debug, "Debug level 0-1");
+
+MODULE_DESCRIPTION("VPFE Video for Linux Capture Driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Texas Instruments");
+
+/* standard information */
+struct vpfe_standard {
+	v4l2_std_id std_id;
+	unsigned int width;
+	unsigned int height;
+	struct v4l2_fract pixelaspect;
+	/* 0 - progressive, 1 - interlaced */
+	int frame_format;
+};
+
+/* ccdc configuration */
+struct ccdc_config {
+	/* This make sure vpfe is probed and ready to go */
+	int vpfe_probed;
+	/* name of ccdc device */
+	char name[32];
+	/* for storing mem maps for CCDC */
+	int ccdc_addr_size;
+	void *__iomem ccdc_addr;
+};
+
+/* data structures */
+static struct vpfe_config_params config_params = {
+	.min_numbuffers = 3,
+	.numbuffers = 3,
+	.min_bufsize = 720 * 480 * 2,
+	.device_bufsize = 720 * 576 * 2,
+};
+
+/* ccdc device registered */
+static struct ccdc_hw_device *ccdc_dev;
+/* lock for accessing ccdc information */
+static DEFINE_MUTEX(ccdc_lock);
+/* ccdc configuration */
+static struct ccdc_config *ccdc_cfg;
+
+const struct vpfe_standard vpfe_standards[] = {
+	{V4L2_STD_525_60, 720, 480, {11, 10}, 1},
+	{V4L2_STD_625_50, 720, 576, {54, 59}, 1},
+};
+
+/* Used when raw Bayer image from ccdc is directly captured to SDRAM */
+static const struct vpfe_pixel_format vpfe_pix_fmts[] = {
+	{
+		.fmtdesc = {
+			.index = 0,
+			.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+			.description = "Bayer GrRBGb 8bit A-Law compr.",
+			.pixelformat = V4L2_PIX_FMT_SBGGR8,
+		},
+		.bpp = 1,
+	},
+	{
+		.fmtdesc = {
+			.index = 1,
+			.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+			.description = "Bayer GrRBGb - 16bit",
+			.pixelformat = V4L2_PIX_FMT_SBGGR16,
+		},
+		.bpp = 2,
+	},
+	{
+		.fmtdesc = {
+			.index = 2,
+			.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+			.description = "Bayer GrRBGb 8bit DPCM compr.",
+			.pixelformat = V4L2_PIX_FMT_SGRBG10DPCM8,
+		},
+		.bpp = 1,
+	},
+	{
+		.fmtdesc = {
+			.index = 3,
+			.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+			.description = "YCbCr 4:2:2 Interleaved UYVY",
+			.pixelformat = V4L2_PIX_FMT_UYVY,
+		},
+		.bpp = 2,
+	},
+	{
+		.fmtdesc = {
+			.index = 4,
+			.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+			.description = "YCbCr 4:2:2 Interleaved YUYV",
+			.pixelformat = V4L2_PIX_FMT_YUYV,
+		},
+		.bpp = 2,
+	},
+	{
+		.fmtdesc = {
+			.index = 5,
+			.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+			.description = "Y/CbCr 4:2:0 - Semi planar",
+			.pixelformat = V4L2_PIX_FMT_NV12,
+		},
+		.bpp = 1,
+	},
+};
+
+/*
+ * vpfe_lookup_pix_format()
+ * lookup an entry in the vpfe pix format table based on pix_format
+ */
+static const struct vpfe_pixel_format *vpfe_lookup_pix_format(u32 pix_format)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(vpfe_pix_fmts); i++) {
+		if (pix_format == vpfe_pix_fmts[i].fmtdesc.pixelformat)
+			return &vpfe_pix_fmts[i];
+	}
+	return NULL;
+}
+
+/*
+ * vpfe_register_ccdc_device. CCDC module calls this to
+ * register with vpfe capture
+ */
+int vpfe_register_ccdc_device(struct ccdc_hw_device *dev)
+{
+	int ret = 0;
+	printk(KERN_NOTICE "vpfe_register_ccdc_device: %s\n", dev->name);
+
+	BUG_ON(!dev->hw_ops.open);
+	BUG_ON(!dev->hw_ops.enable);
+	BUG_ON(!dev->hw_ops.set_hw_if_params);
+	BUG_ON(!dev->hw_ops.configure);
+	BUG_ON(!dev->hw_ops.set_buftype);
+	BUG_ON(!dev->hw_ops.get_buftype);
+	BUG_ON(!dev->hw_ops.enum_pix);
+	BUG_ON(!dev->hw_ops.set_frame_format);
+	BUG_ON(!dev->hw_ops.get_frame_format);
+	BUG_ON(!dev->hw_ops.get_pixel_format);
+	BUG_ON(!dev->hw_ops.set_pixel_format);
+	BUG_ON(!dev->hw_ops.set_params);
+	BUG_ON(!dev->hw_ops.set_image_window);
+	BUG_ON(!dev->hw_ops.get_image_window);
+	BUG_ON(!dev->hw_ops.get_line_length);
+	BUG_ON(!dev->hw_ops.setfbaddr);
+	BUG_ON(!dev->hw_ops.getfid);
+
+	mutex_lock(&ccdc_lock);
+	if (NULL == ccdc_cfg) {
+		/*
+		 * TODO. Will this ever happen? if so, we need to fix it.
+		 * Proabably we need to add the request to a linked list and
+		 * walk through it during vpfe probe
+		 */
+		printk(KERN_ERR "vpfe capture not initialized\n");
+		ret = -1;
+		goto unlock;
+	}
+
+	if (strcmp(dev->name, ccdc_cfg->name)) {
+		/* ignore this ccdc */
+		ret = -1;
+		goto unlock;
+	}
+
+	if (ccdc_dev) {
+		printk(KERN_ERR "ccdc already registered\n");
+		ret = -1;
+		goto unlock;
+	}
+
+	ccdc_dev = dev;
+	dev->hw_ops.set_ccdc_base(ccdc_cfg->ccdc_addr,
+				  ccdc_cfg->ccdc_addr_size);
+unlock:
+	mutex_unlock(&ccdc_lock);
+	return ret;
+}
+EXPORT_SYMBOL(vpfe_register_ccdc_device);
+
+/*
+ * vpfe_unregister_ccdc_device. CCDC module calls this to
+ * unregister with vpfe capture
+ */
+void vpfe_unregister_ccdc_device(struct ccdc_hw_device *dev)
+{
+	if (NULL == dev) {
+		printk(KERN_ERR "invalid ccdc device ptr\n");
+		return;
+	}
+
+	printk(KERN_NOTICE "vpfe_unregister_ccdc_device, dev->name = %s\n",
+		dev->name);
+
+	if (strcmp(dev->name, ccdc_cfg->name)) {
+		/* ignore this ccdc */
+		return;
+	}
+
+	mutex_lock(&ccdc_lock);
+	ccdc_dev = NULL;
+	mutex_unlock(&ccdc_lock);
+	return;
+}
+EXPORT_SYMBOL(vpfe_unregister_ccdc_device);
+
+/*
+ * vpfe_get_ccdc_image_format - Get image parameters based on CCDC settings
+ */
+static int vpfe_get_ccdc_image_format(struct vpfe_device *vpfe_dev,
+				 struct v4l2_format *f)
+{
+	struct v4l2_rect image_win;
+	enum ccdc_buftype buf_type;
+	enum ccdc_frmfmt frm_fmt;
+
+	memset(f, 0, sizeof(*f));
+	f->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
+	ccdc_dev->hw_ops.get_image_window(&image_win);
+	f->fmt.pix.width = image_win.width;
+	f->fmt.pix.height = image_win.height;
+	f->fmt.pix.bytesperline = ccdc_dev->hw_ops.get_line_length();
+	f->fmt.pix.sizeimage = f->fmt.pix.bytesperline *
+				f->fmt.pix.height;
+	buf_type = ccdc_dev->hw_ops.get_buftype();
+	f->fmt.pix.pixelformat = ccdc_dev->hw_ops.get_pixel_format();
+	frm_fmt = ccdc_dev->hw_ops.get_frame_format();
+	if (frm_fmt == CCDC_FRMFMT_PROGRESSIVE)
+		f->fmt.pix.field = V4L2_FIELD_NONE;
+	else if (frm_fmt == CCDC_FRMFMT_INTERLACED) {
+		if (buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED)
+			f->fmt.pix.field = V4L2_FIELD_INTERLACED;
+		else if (buf_type == CCDC_BUFTYPE_FLD_SEPARATED)
+			f->fmt.pix.field = V4L2_FIELD_SEQ_TB;
+		else {
+			v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf_type\n");
+			return -EINVAL;
+		}
+	} else {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid frm_fmt\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/*
+ * vpfe_config_ccdc_image_format()
+ * For a pix format, configure ccdc to setup the capture
+ */
+static int vpfe_config_ccdc_image_format(struct vpfe_device *vpfe_dev)
+{
+	enum ccdc_frmfmt frm_fmt = CCDC_FRMFMT_INTERLACED;
+	int ret = 0;
+
+	if (ccdc_dev->hw_ops.set_pixel_format(
+			vpfe_dev->fmt.fmt.pix.pixelformat) < 0) {
+		v4l2_err(&vpfe_dev->v4l2_dev,
+			"couldn't set pix format in ccdc\n");
+		return -EINVAL;
+	}
+	/* configure the image window */
+	ccdc_dev->hw_ops.set_image_window(&vpfe_dev->crop);
+
+	switch (vpfe_dev->fmt.fmt.pix.field) {
+	case V4L2_FIELD_INTERLACED:
+		/* do nothing, since it is default */
+		ret = ccdc_dev->hw_ops.set_buftype(
+				CCDC_BUFTYPE_FLD_INTERLEAVED);
+		break;
+	case V4L2_FIELD_NONE:
+		frm_fmt = CCDC_FRMFMT_PROGRESSIVE;
+		/* buffer type only applicable for interlaced scan */
+		break;
+	case V4L2_FIELD_SEQ_TB:
+		ret = ccdc_dev->hw_ops.set_buftype(
+				CCDC_BUFTYPE_FLD_SEPARATED);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* set the frame format */
+	if (!ret)
+		ret = ccdc_dev->hw_ops.set_frame_format(frm_fmt);
+	return ret;
+}
+/*
+ * vpfe_config_image_format()
+ * For a given standard, this functions sets up the default
+ * pix format & crop values in the vpfe device and ccdc.  It first
+ * starts with defaults based values from the standard table.
+ * It then checks if sub device support g_fmt and then override the
+ * values based on that.Sets crop values to match with scan resolution
+ * starting at 0,0. It calls vpfe_config_ccdc_image_format() set the
+ * values in ccdc
+ */
+static int vpfe_config_image_format(struct vpfe_device *vpfe_dev,
+				    const v4l2_std_id *std_id)
+{
+	struct vpfe_subdev_info *sdinfo = vpfe_dev->current_subdev;
+	int i, ret = 0;
+
+	for (i = 0; i < ARRAY_SIZE(vpfe_standards); i++) {
+		if (vpfe_standards[i].std_id & *std_id) {
+			vpfe_dev->std_info.active_pixels =
+					vpfe_standards[i].width;
+			vpfe_dev->std_info.active_lines =
+					vpfe_standards[i].height;
+			vpfe_dev->std_info.frame_format =
+					vpfe_standards[i].frame_format;
+			vpfe_dev->std_index = i;
+			break;
+		}
+	}
+
+	if (i ==  ARRAY_SIZE(vpfe_standards)) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "standard not supported\n");
+		return -EINVAL;
+	}
+
+	vpfe_dev->crop.top = 0;
+	vpfe_dev->crop.left = 0;
+	vpfe_dev->crop.width = vpfe_dev->std_info.active_pixels;
+	vpfe_dev->crop.height = vpfe_dev->std_info.active_lines;
+	vpfe_dev->fmt.fmt.pix.width = vpfe_dev->crop.width;
+	vpfe_dev->fmt.fmt.pix.height = vpfe_dev->crop.height;
+
+	/* first field and frame format based on standard frame format */
+	if (vpfe_dev->std_info.frame_format) {
+		vpfe_dev->fmt.fmt.pix.field = V4L2_FIELD_INTERLACED;
+		/* assume V4L2_PIX_FMT_UYVY as default */
+		vpfe_dev->fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_UYVY;
+	} else {
+		vpfe_dev->fmt.fmt.pix.field = V4L2_FIELD_NONE;
+		/* assume V4L2_PIX_FMT_SBGGR8 */
+		vpfe_dev->fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_SBGGR8;
+	}
+
+	/* if sub device supports g_fmt, override the defaults */
+	ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev,
+			sdinfo->grp_id, video, g_fmt, &vpfe_dev->fmt);
+
+	if (ret && ret != -ENOIOCTLCMD) {
+		v4l2_err(&vpfe_dev->v4l2_dev,
+			"error in getting g_fmt from sub device\n");
+		return ret;
+	}
+
+	/* Sets the values in CCDC */
+	ret = vpfe_config_ccdc_image_format(vpfe_dev);
+	if (ret)
+		return ret;
+
+	/* Update the values of sizeimage and bytesperline */
+	if (!ret) {
+		vpfe_dev->fmt.fmt.pix.bytesperline =
+			ccdc_dev->hw_ops.get_line_length();
+		vpfe_dev->fmt.fmt.pix.sizeimage =
+			vpfe_dev->fmt.fmt.pix.bytesperline *
+			vpfe_dev->fmt.fmt.pix.height;
+	}
+	return ret;
+}
+
+static int vpfe_initialize_device(struct vpfe_device *vpfe_dev)
+{
+	int ret = 0;
+
+	/* set first input of current subdevice as the current input */
+	vpfe_dev->current_input = 0;
+
+	/* set default standard */
+	vpfe_dev->std_index = 0;
+
+	/* Configure the default format information */
+	ret = vpfe_config_image_format(vpfe_dev,
+				&vpfe_standards[vpfe_dev->std_index].std_id);
+	if (ret)
+		return ret;
+
+	/* now open the ccdc device to initialize it */
+	mutex_lock(&ccdc_lock);
+	if (NULL == ccdc_dev) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "ccdc device not registered\n");
+		ret = -ENODEV;
+		goto unlock;
+	}
+
+	if (!try_module_get(ccdc_dev->owner)) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Couldn't lock ccdc module\n");
+		ret = -ENODEV;
+		goto unlock;
+	}
+	ret = ccdc_dev->hw_ops.open(vpfe_dev->pdev);
+	if (!ret)
+		vpfe_dev->initialized = 1;
+unlock:
+	mutex_unlock(&ccdc_lock);
+	return ret;
+}
+
+/*
+ * vpfe_open : It creates object of file handle structure and
+ * stores it in private_data  member of filepointer
+ */
+static int vpfe_open(struct file *file)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_fh *fh;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_open\n");
+
+	if (!vpfe_dev->cfg->num_subdevs) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "No decoder registered\n");
+		return -ENODEV;
+	}
+
+	/* Allocate memory for the file handle object */
+	fh = kmalloc(sizeof(struct vpfe_fh), GFP_KERNEL);
+	if (NULL == fh) {
+		v4l2_err(&vpfe_dev->v4l2_dev,
+			"unable to allocate memory for file handle object\n");
+		return -ENOMEM;
+	}
+	/* store pointer to fh in private_data member of file */
+	file->private_data = fh;
+	fh->vpfe_dev = vpfe_dev;
+	mutex_lock(&vpfe_dev->lock);
+	/* If decoder is not initialized. initialize it */
+	if (!vpfe_dev->initialized) {
+		if (vpfe_initialize_device(vpfe_dev)) {
+			mutex_unlock(&vpfe_dev->lock);
+			return -ENODEV;
+		}
+	}
+	/* Increment device usrs counter */
+	vpfe_dev->usrs++;
+	/* Set io_allowed member to false */
+	fh->io_allowed = 0;
+	/* Initialize priority of this instance to default priority */
+	fh->prio = V4L2_PRIORITY_UNSET;
+	v4l2_prio_open(&vpfe_dev->prio, &fh->prio);
+	mutex_unlock(&vpfe_dev->lock);
+	return 0;
+}
+
+static void vpfe_schedule_next_buffer(struct vpfe_device *vpfe_dev)
+{
+	unsigned long addr;
+
+	vpfe_dev->next_frm = list_entry(vpfe_dev->dma_queue.next,
+					struct videobuf_buffer, queue);
+	list_del(&vpfe_dev->next_frm->queue);
+	vpfe_dev->next_frm->state = VIDEOBUF_ACTIVE;
+	addr = videobuf_to_dma_contig(vpfe_dev->next_frm);
+	ccdc_dev->hw_ops.setfbaddr(addr);
+}
+
+static void vpfe_process_buffer_complete(struct vpfe_device *vpfe_dev)
+{
+	struct timeval timevalue;
+
+	do_gettimeofday(&timevalue);
+	vpfe_dev->cur_frm->ts = timevalue;
+	vpfe_dev->cur_frm->state = VIDEOBUF_DONE;
+	vpfe_dev->cur_frm->size = vpfe_dev->fmt.fmt.pix.sizeimage;
+	wake_up_interruptible(&vpfe_dev->cur_frm->done);
+	vpfe_dev->cur_frm = vpfe_dev->next_frm;
+}
+
+/* ISR for VINT0*/
+static irqreturn_t vpfe_isr(int irq, void *dev_id)
+{
+	struct vpfe_device *vpfe_dev = dev_id;
+	enum v4l2_field field;
+	unsigned long addr;
+	int fid;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "\nStarting vpfe_isr...\n");
+	field = vpfe_dev->fmt.fmt.pix.field;
+
+	/* if streaming not started, don't do anything */
+	if (!vpfe_dev->started)
+		return IRQ_HANDLED;
+
+	/* only for 6446 this will be applicable */
+	if (NULL != ccdc_dev->hw_ops.reset)
+		ccdc_dev->hw_ops.reset();
+
+	if (field == V4L2_FIELD_NONE) {
+		/* handle progressive frame capture */
+		v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
+			"frame format is progressive...\n");
+		if (vpfe_dev->cur_frm != vpfe_dev->next_frm)
+			vpfe_process_buffer_complete(vpfe_dev);
+		return IRQ_HANDLED;
+	}
+
+	/* interlaced or TB capture check which field we are in hardware */
+	fid = ccdc_dev->hw_ops.getfid();
+
+	/* switch the software maintained field id */
+	vpfe_dev->field_id ^= 1;
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "field id = %x:%x.\n",
+		fid, vpfe_dev->field_id);
+	if (fid == vpfe_dev->field_id) {
+		/* we are in-sync here,continue */
+		if (fid == 0) {
+			/*
+			 * One frame is just being captured. If the next frame
+			 * is available, release the current frame and move on
+			 */
+			if (vpfe_dev->cur_frm != vpfe_dev->next_frm)
+				vpfe_process_buffer_complete(vpfe_dev);
+			/*
+			 * based on whether the two fields are stored
+			 * interleavely or separately in memory, reconfigure
+			 * the CCDC memory address
+			 */
+			if (field == V4L2_FIELD_SEQ_TB) {
+				addr =
+				  videobuf_to_dma_contig(vpfe_dev->cur_frm);
+				addr += vpfe_dev->field_off;
+				ccdc_dev->hw_ops.setfbaddr(addr);
+			}
+			return IRQ_HANDLED;
+		}
+		/*
+		 * if one field is just being captured configure
+		 * the next frame get the next frame from the empty
+		 * queue if no frame is available hold on to the
+		 * current buffer
+		 */
+		spin_lock(&vpfe_dev->dma_queue_lock);
+		if (!list_empty(&vpfe_dev->dma_queue) &&
+		    vpfe_dev->cur_frm == vpfe_dev->next_frm)
+			vpfe_schedule_next_buffer(vpfe_dev);
+		spin_unlock(&vpfe_dev->dma_queue_lock);
+	} else if (fid == 0) {
+		/*
+		 * out of sync. Recover from any hardware out-of-sync.
+		 * May loose one frame
+		 */
+		vpfe_dev->field_id = fid;
+	}
+	return IRQ_HANDLED;
+}
+
+/* vdint1_isr - isr handler for VINT1 interrupt */
+static irqreturn_t vdint1_isr(int irq, void *dev_id)
+{
+	struct vpfe_device *vpfe_dev = dev_id;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "\nInside vdint1_isr...\n");
+
+	/* if streaming not started, don't do anything */
+	if (!vpfe_dev->started)
+		return IRQ_HANDLED;
+
+	spin_lock(&vpfe_dev->dma_queue_lock);
+	if ((vpfe_dev->fmt.fmt.pix.field == V4L2_FIELD_NONE) &&
+	    !list_empty(&vpfe_dev->dma_queue) &&
+	    vpfe_dev->cur_frm == vpfe_dev->next_frm)
+		vpfe_schedule_next_buffer(vpfe_dev);
+	spin_unlock(&vpfe_dev->dma_queue_lock);
+	return IRQ_HANDLED;
+}
+
+static void vpfe_detach_irq(struct vpfe_device *vpfe_dev)
+{
+	enum ccdc_frmfmt frame_format;
+
+	frame_format = ccdc_dev->hw_ops.get_frame_format();
+	if (frame_format == CCDC_FRMFMT_PROGRESSIVE)
+		free_irq(IRQ_VDINT1, vpfe_dev);
+}
+
+static int vpfe_attach_irq(struct vpfe_device *vpfe_dev)
+{
+	enum ccdc_frmfmt frame_format;
+
+	frame_format = ccdc_dev->hw_ops.get_frame_format();
+	if (frame_format == CCDC_FRMFMT_PROGRESSIVE) {
+		return request_irq(vpfe_dev->ccdc_irq1, vdint1_isr,
+				    IRQF_DISABLED, "vpfe_capture1",
+				    vpfe_dev);
+	}
+	return 0;
+}
+
+/* vpfe_stop_ccdc_capture: stop streaming in ccdc/isif */
+static void vpfe_stop_ccdc_capture(struct vpfe_device *vpfe_dev)
+{
+	vpfe_dev->started = 0;
+	ccdc_dev->hw_ops.enable(0);
+	if (ccdc_dev->hw_ops.enable_out_to_sdram)
+		ccdc_dev->hw_ops.enable_out_to_sdram(0);
+}
+
+/*
+ * vpfe_release : This function deletes buffer queue, frees the
+ * buffers and the vpfe file  handle
+ */
+static int vpfe_release(struct file *file)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_fh *fh = file->private_data;
+	struct vpfe_subdev_info *sdinfo;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_release\n");
+
+	/* Get the device lock */
+	mutex_lock(&vpfe_dev->lock);
+	/* if this instance is doing IO */
+	if (fh->io_allowed) {
+		if (vpfe_dev->started) {
+			sdinfo = vpfe_dev->current_subdev;
+			ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev,
+							 sdinfo->grp_id,
+							 video, s_stream, 0);
+			if (ret && (ret != -ENOIOCTLCMD))
+				v4l2_err(&vpfe_dev->v4l2_dev,
+				"stream off failed in subdev\n");
+			vpfe_stop_ccdc_capture(vpfe_dev);
+			vpfe_detach_irq(vpfe_dev);
+			videobuf_streamoff(&vpfe_dev->buffer_queue);
+		}
+		vpfe_dev->io_usrs = 0;
+		vpfe_dev->numbuffers = config_params.numbuffers;
+	}
+
+	/* Decrement device usrs counter */
+	vpfe_dev->usrs--;
+	/* Close the priority */
+	v4l2_prio_close(&vpfe_dev->prio, &fh->prio);
+	/* If this is the last file handle */
+	if (!vpfe_dev->usrs) {
+		vpfe_dev->initialized = 0;
+		if (ccdc_dev->hw_ops.close)
+			ccdc_dev->hw_ops.close(vpfe_dev->pdev);
+		module_put(ccdc_dev->owner);
+	}
+	mutex_unlock(&vpfe_dev->lock);
+	file->private_data = NULL;
+	/* Free memory allocated to file handle object */
+	kfree(fh);
+	return 0;
+}
+
+/*
+ * vpfe_mmap : It is used to map kernel space buffers
+ * into user spaces
+ */
+static int vpfe_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	/* Get the device object and file handle object */
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_mmap\n");
+
+	return videobuf_mmap_mapper(&vpfe_dev->buffer_queue, vma);
+}
+
+/*
+ * vpfe_poll: It is used for select/poll system call
+ */
+static unsigned int vpfe_poll(struct file *file, poll_table *wait)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_poll\n");
+
+	if (vpfe_dev->started)
+		return videobuf_poll_stream(file,
+					    &vpfe_dev->buffer_queue, wait);
+	return 0;
+}
+
+/* vpfe capture driver file operations */
+static const struct v4l2_file_operations vpfe_fops = {
+	.owner = THIS_MODULE,
+	.open = vpfe_open,
+	.release = vpfe_release,
+	.unlocked_ioctl = video_ioctl2,
+	.mmap = vpfe_mmap,
+	.poll = vpfe_poll
+};
+
+/*
+ * vpfe_check_format()
+ * This function adjust the input pixel format as per hardware
+ * capabilities and update the same in pixfmt.
+ * Following algorithm used :-
+ *
+ *	If given pixformat is not in the vpfe list of pix formats or not
+ *	supported by the hardware, current value of pixformat in the device
+ *	is used
+ *	If given field is not supported, then current field is used. If field
+ *	is different from current, then it is matched with that from sub device.
+ *	Minimum height is 2 lines for interlaced or tb field and 1 line for
+ *	progressive. Maximum height is clamped to active active lines of scan
+ *	Minimum width is 32 bytes in memory and width is clamped to active
+ *	pixels of scan.
+ *	bytesperline is a multiple of 32.
+ */
+static const struct vpfe_pixel_format *
+	vpfe_check_format(struct vpfe_device *vpfe_dev,
+			  struct v4l2_pix_format *pixfmt)
+{
+	u32 min_height = 1, min_width = 32, max_width, max_height;
+	const struct vpfe_pixel_format *vpfe_pix_fmt;
+	u32 pix;
+	int temp, found;
+
+	vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat);
+	if (NULL == vpfe_pix_fmt) {
+		/*
+		 * use current pixel format in the vpfe device. We
+		 * will find this pix format in the table
+		 */
+		pixfmt->pixelformat = vpfe_dev->fmt.fmt.pix.pixelformat;
+		vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat);
+	}
+
+	/* check if hw supports it */
+	temp = 0;
+	found = 0;
+	while (ccdc_dev->hw_ops.enum_pix(&pix, temp) >= 0) {
+		if (vpfe_pix_fmt->fmtdesc.pixelformat == pix) {
+			found = 1;
+			break;
+		}
+		temp++;
+	}
+
+	if (!found) {
+		/* use current pixel format */
+		pixfmt->pixelformat = vpfe_dev->fmt.fmt.pix.pixelformat;
+		/*
+		 * Since this is currently used in the vpfe device, we
+		 * will find this pix format in the table
+		 */
+		vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat);
+	}
+
+	/* check what field format is supported */
+	if (pixfmt->field == V4L2_FIELD_ANY) {
+		/* if field is any, use current value as default */
+		pixfmt->field = vpfe_dev->fmt.fmt.pix.field;
+	}
+
+	/*
+	 * if field is not same as current field in the vpfe device
+	 * try matching the field with the sub device field
+	 */
+	if (vpfe_dev->fmt.fmt.pix.field != pixfmt->field) {
+		/*
+		 * If field value is not in the supported fields, use current
+		 * field used in the device as default
+		 */
+		switch (pixfmt->field) {
+		case V4L2_FIELD_INTERLACED:
+		case V4L2_FIELD_SEQ_TB:
+			/* if sub device is supporting progressive, use that */
+			if (!vpfe_dev->std_info.frame_format)
+				pixfmt->field = V4L2_FIELD_NONE;
+			break;
+		case V4L2_FIELD_NONE:
+			if (vpfe_dev->std_info.frame_format)
+				pixfmt->field = V4L2_FIELD_INTERLACED;
+			break;
+
+		default:
+			/* use current field as default */
+			pixfmt->field = vpfe_dev->fmt.fmt.pix.field;
+			break;
+		}
+	}
+
+	/* Now adjust image resolutions supported */
+	if (pixfmt->field == V4L2_FIELD_INTERLACED ||
+	    pixfmt->field == V4L2_FIELD_SEQ_TB)
+		min_height = 2;
+
+	max_width = vpfe_dev->std_info.active_pixels;
+	max_height = vpfe_dev->std_info.active_lines;
+	min_width /= vpfe_pix_fmt->bpp;
+
+	v4l2_info(&vpfe_dev->v4l2_dev, "width = %d, height = %d, bpp = %d\n",
+		  pixfmt->width, pixfmt->height, vpfe_pix_fmt->bpp);
+
+	pixfmt->width = clamp((pixfmt->width), min_width, max_width);
+	pixfmt->height = clamp((pixfmt->height), min_height, max_height);
+
+	/* If interlaced, adjust height to be a multiple of 2 */
+	if (pixfmt->field == V4L2_FIELD_INTERLACED)
+		pixfmt->height &= (~1);
+	/*
+	 * recalculate bytesperline and sizeimage since width
+	 * and height might have changed
+	 */
+	pixfmt->bytesperline = (((pixfmt->width * vpfe_pix_fmt->bpp) + 31)
+				& ~31);
+	if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12)
+		pixfmt->sizeimage =
+			pixfmt->bytesperline * pixfmt->height +
+			((pixfmt->bytesperline * pixfmt->height) >> 1);
+	else
+		pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
+
+	v4l2_info(&vpfe_dev->v4l2_dev, "adjusted width = %d, height ="
+		 " %d, bpp = %d, bytesperline = %d, sizeimage = %d\n",
+		 pixfmt->width, pixfmt->height, vpfe_pix_fmt->bpp,
+		 pixfmt->bytesperline, pixfmt->sizeimage);
+	return vpfe_pix_fmt;
+}
+
+static int vpfe_querycap(struct file *file, void  *priv,
+			       struct v4l2_capability *cap)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querycap\n");
+
+	cap->version = VPFE_CAPTURE_VERSION_CODE;
+	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
+	strlcpy(cap->driver, CAPTURE_DRV_NAME, sizeof(cap->driver));
+	strlcpy(cap->bus_info, "VPFE", sizeof(cap->bus_info));
+	strlcpy(cap->card, vpfe_dev->cfg->card_name, sizeof(cap->card));
+	return 0;
+}
+
+static int vpfe_g_fmt_vid_cap(struct file *file, void *priv,
+				struct v4l2_format *fmt)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	int ret = 0;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_fmt_vid_cap\n");
+	/* Fill in the information about format */
+	*fmt = vpfe_dev->fmt;
+	return ret;
+}
+
+static int vpfe_enum_fmt_vid_cap(struct file *file, void  *priv,
+				   struct v4l2_fmtdesc *fmt)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	const struct vpfe_pixel_format *pix_fmt;
+	int temp_index;
+	u32 pix;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_enum_fmt_vid_cap\n");
+
+	if (ccdc_dev->hw_ops.enum_pix(&pix, fmt->index) < 0)
+		return -EINVAL;
+
+	/* Fill in the information about format */
+	pix_fmt = vpfe_lookup_pix_format(pix);
+	if (NULL != pix_fmt) {
+		temp_index = fmt->index;
+		*fmt = pix_fmt->fmtdesc;
+		fmt->index = temp_index;
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static int vpfe_s_fmt_vid_cap(struct file *file, void *priv,
+				struct v4l2_format *fmt)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	const struct vpfe_pixel_format *pix_fmts;
+	int ret = 0;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_fmt_vid_cap\n");
+
+	/* If streaming is started, return error */
+	if (vpfe_dev->started) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Streaming is started\n");
+		return -EBUSY;
+	}
+
+	/* Check for valid frame format */
+	pix_fmts = vpfe_check_format(vpfe_dev, &fmt->fmt.pix);
+
+	if (NULL == pix_fmts)
+		return -EINVAL;
+
+	/* store the pixel format in the device  object */
+	ret = mutex_lock_interruptible(&vpfe_dev->lock);
+	if (ret)
+		return ret;
+
+	/* First detach any IRQ if currently attached */
+	vpfe_detach_irq(vpfe_dev);
+	vpfe_dev->fmt = *fmt;
+	/* set image capture parameters in the ccdc */
+	ret = vpfe_config_ccdc_image_format(vpfe_dev);
+	mutex_unlock(&vpfe_dev->lock);
+	return ret;
+}
+
+static int vpfe_try_fmt_vid_cap(struct file *file, void *priv,
+				  struct v4l2_format *f)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	const struct vpfe_pixel_format *pix_fmts;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_try_fmt_vid_cap\n");
+
+	pix_fmts = vpfe_check_format(vpfe_dev, &f->fmt.pix);
+	if (NULL == pix_fmts)
+		return -EINVAL;
+	return 0;
+}
+
+/*
+ * vpfe_get_subdev_input_index - Get subdev index and subdev input index for a
+ * given app input index
+ */
+static int vpfe_get_subdev_input_index(struct vpfe_device *vpfe_dev,
+					int *subdev_index,
+					int *subdev_input_index,
+					int app_input_index)
+{
+	struct vpfe_config *cfg = vpfe_dev->cfg;
+	struct vpfe_subdev_info *sdinfo;
+	int i, j = 0;
+
+	for (i = 0; i < cfg->num_subdevs; i++) {
+		sdinfo = &cfg->sub_devs[i];
+		if (app_input_index < (j + sdinfo->num_inputs)) {
+			*subdev_index = i;
+			*subdev_input_index = app_input_index - j;
+			return 0;
+		}
+		j += sdinfo->num_inputs;
+	}
+	return -EINVAL;
+}
+
+/*
+ * vpfe_get_app_input - Get app input index for a given subdev input index
+ * driver stores the input index of the current sub device and translate it
+ * when application request the current input
+ */
+static int vpfe_get_app_input_index(struct vpfe_device *vpfe_dev,
+				    int *app_input_index)
+{
+	struct vpfe_config *cfg = vpfe_dev->cfg;
+	struct vpfe_subdev_info *sdinfo;
+	int i, j = 0;
+
+	for (i = 0; i < cfg->num_subdevs; i++) {
+		sdinfo = &cfg->sub_devs[i];
+		if (!strcmp(sdinfo->name, vpfe_dev->current_subdev->name)) {
+			if (vpfe_dev->current_input >= sdinfo->num_inputs)
+				return -1;
+			*app_input_index = j + vpfe_dev->current_input;
+			return 0;
+		}
+		j += sdinfo->num_inputs;
+	}
+	return -EINVAL;
+}
+
+static int vpfe_enum_input(struct file *file, void *priv,
+				 struct v4l2_input *inp)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_subdev_info *sdinfo;
+	int subdev, index ;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_enum_input\n");
+
+	if (vpfe_get_subdev_input_index(vpfe_dev,
+					&subdev,
+					&index,
+					inp->index) < 0) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "input information not found"
+			 " for the subdev\n");
+		return -EINVAL;
+	}
+	sdinfo = &vpfe_dev->cfg->sub_devs[subdev];
+	memcpy(inp, &sdinfo->inputs[index], sizeof(struct v4l2_input));
+	return 0;
+}
+
+static int vpfe_g_input(struct file *file, void *priv, unsigned int *index)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_input\n");
+
+	return vpfe_get_app_input_index(vpfe_dev, index);
+}
+
+
+static int vpfe_s_input(struct file *file, void *priv, unsigned int index)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_subdev_info *sdinfo;
+	int subdev_index, inp_index;
+	struct vpfe_route *route;
+	u32 input = 0, output = 0;
+	int ret = -EINVAL;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_input\n");
+
+	ret = mutex_lock_interruptible(&vpfe_dev->lock);
+	if (ret)
+		return ret;
+
+	/*
+	 * If streaming is started return device busy
+	 * error
+	 */
+	if (vpfe_dev->started) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Streaming is on\n");
+		ret = -EBUSY;
+		goto unlock_out;
+	}
+
+	if (vpfe_get_subdev_input_index(vpfe_dev,
+					&subdev_index,
+					&inp_index,
+					index) < 0) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "invalid input index\n");
+		goto unlock_out;
+	}
+
+	sdinfo = &vpfe_dev->cfg->sub_devs[subdev_index];
+	route = &sdinfo->routes[inp_index];
+	if (route && sdinfo->can_route) {
+		input = route->input;
+		output = route->output;
+	}
+
+	ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
+					 video, s_routing, input, output, 0);
+
+	if (ret) {
+		v4l2_err(&vpfe_dev->v4l2_dev,
+			"vpfe_doioctl:error in setting input in decoder\n");
+		ret = -EINVAL;
+		goto unlock_out;
+	}
+	vpfe_dev->current_subdev = sdinfo;
+	vpfe_dev->current_input = index;
+	vpfe_dev->std_index = 0;
+
+	/* set the bus/interface parameter for the sub device in ccdc */
+	ret = ccdc_dev->hw_ops.set_hw_if_params(&sdinfo->ccdc_if_params);
+	if (ret)
+		goto unlock_out;
+
+	/* set the default image parameters in the device */
+	ret = vpfe_config_image_format(vpfe_dev,
+				&vpfe_standards[vpfe_dev->std_index].std_id);
+unlock_out:
+	mutex_unlock(&vpfe_dev->lock);
+	return ret;
+}
+
+static int vpfe_querystd(struct file *file, void *priv, v4l2_std_id *std_id)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_subdev_info *sdinfo;
+	int ret = 0;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querystd\n");
+
+	ret = mutex_lock_interruptible(&vpfe_dev->lock);
+	sdinfo = vpfe_dev->current_subdev;
+	if (ret)
+		return ret;
+	/* Call querystd function of decoder device */
+	ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
+					 video, querystd, std_id);
+	mutex_unlock(&vpfe_dev->lock);
+	return ret;
+}
+
+static int vpfe_s_std(struct file *file, void *priv, v4l2_std_id *std_id)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_subdev_info *sdinfo;
+	int ret = 0;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_std\n");
+
+	/* Call decoder driver function to set the standard */
+	ret = mutex_lock_interruptible(&vpfe_dev->lock);
+	if (ret)
+		return ret;
+
+	sdinfo = vpfe_dev->current_subdev;
+	/* If streaming is started, return device busy error */
+	if (vpfe_dev->started) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "streaming is started\n");
+		ret = -EBUSY;
+		goto unlock_out;
+	}
+
+	ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
+					 core, s_std, *std_id);
+	if (ret < 0) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Failed to set standard\n");
+		goto unlock_out;
+	}
+	ret = vpfe_config_image_format(vpfe_dev, std_id);
+
+unlock_out:
+	mutex_unlock(&vpfe_dev->lock);
+	return ret;
+}
+
+static int vpfe_g_std(struct file *file, void *priv, v4l2_std_id *std_id)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_std\n");
+
+	*std_id = vpfe_standards[vpfe_dev->std_index].std_id;
+	return 0;
+}
+/*
+ *  Videobuf operations
+ */
+static int vpfe_videobuf_setup(struct videobuf_queue *vq,
+				unsigned int *count,
+				unsigned int *size)
+{
+	struct vpfe_fh *fh = vq->priv_data;
+	struct vpfe_device *vpfe_dev = fh->vpfe_dev;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_setup\n");
+	*size = config_params.device_bufsize;
+
+	if (*count < config_params.min_numbuffers)
+		*count = config_params.min_numbuffers;
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
+		"count=%d, size=%d\n", *count, *size);
+	return 0;
+}
+
+static int vpfe_videobuf_prepare(struct videobuf_queue *vq,
+				struct videobuf_buffer *vb,
+				enum v4l2_field field)
+{
+	struct vpfe_fh *fh = vq->priv_data;
+	struct vpfe_device *vpfe_dev = fh->vpfe_dev;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_prepare\n");
+
+	/* If buffer is not initialized, initialize it */
+	if (VIDEOBUF_NEEDS_INIT == vb->state) {
+		vb->width = vpfe_dev->fmt.fmt.pix.width;
+		vb->height = vpfe_dev->fmt.fmt.pix.height;
+		vb->size = vpfe_dev->fmt.fmt.pix.sizeimage;
+		vb->field = field;
+	}
+	vb->state = VIDEOBUF_PREPARED;
+	return 0;
+}
+
+static void vpfe_videobuf_queue(struct videobuf_queue *vq,
+				struct videobuf_buffer *vb)
+{
+	/* Get the file handle object and device object */
+	struct vpfe_fh *fh = vq->priv_data;
+	struct vpfe_device *vpfe_dev = fh->vpfe_dev;
+	unsigned long flags;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_queue\n");
+
+	/* add the buffer to the DMA queue */
+	spin_lock_irqsave(&vpfe_dev->dma_queue_lock, flags);
+	list_add_tail(&vb->queue, &vpfe_dev->dma_queue);
+	spin_unlock_irqrestore(&vpfe_dev->dma_queue_lock, flags);
+
+	/* Change state of the buffer */
+	vb->state = VIDEOBUF_QUEUED;
+}
+
+static void vpfe_videobuf_release(struct videobuf_queue *vq,
+				  struct videobuf_buffer *vb)
+{
+	struct vpfe_fh *fh = vq->priv_data;
+	struct vpfe_device *vpfe_dev = fh->vpfe_dev;
+	unsigned long flags;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_videobuf_release\n");
+
+	/*
+	 * We need to flush the buffer from the dma queue since
+	 * they are de-allocated
+	 */
+	spin_lock_irqsave(&vpfe_dev->dma_queue_lock, flags);
+	INIT_LIST_HEAD(&vpfe_dev->dma_queue);
+	spin_unlock_irqrestore(&vpfe_dev->dma_queue_lock, flags);
+	videobuf_dma_contig_free(vq, vb);
+	vb->state = VIDEOBUF_NEEDS_INIT;
+}
+
+static struct videobuf_queue_ops vpfe_videobuf_qops = {
+	.buf_setup      = vpfe_videobuf_setup,
+	.buf_prepare    = vpfe_videobuf_prepare,
+	.buf_queue      = vpfe_videobuf_queue,
+	.buf_release    = vpfe_videobuf_release,
+};
+
+/*
+ * vpfe_reqbufs. currently support REQBUF only once opening
+ * the device.
+ */
+static int vpfe_reqbufs(struct file *file, void *priv,
+			struct v4l2_requestbuffers *req_buf)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_fh *fh = file->private_data;
+	int ret = 0;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_reqbufs\n");
+
+	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != req_buf->type) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buffer type\n");
+		return -EINVAL;
+	}
+
+	if (V4L2_MEMORY_USERPTR == req_buf->memory) {
+		/* we don't support user ptr IO */
+		v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_reqbufs:"
+			 " USERPTR IO not supported\n");
+		return  -EINVAL;
+	}
+
+	ret = mutex_lock_interruptible(&vpfe_dev->lock);
+	if (ret)
+		return ret;
+
+	if (vpfe_dev->io_usrs != 0) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Only one IO user allowed\n");
+		ret = -EBUSY;
+		goto unlock_out;
+	}
+
+	vpfe_dev->memory = req_buf->memory;
+	videobuf_queue_dma_contig_init(&vpfe_dev->buffer_queue,
+				&vpfe_videobuf_qops,
+				NULL,
+				&vpfe_dev->irqlock,
+				req_buf->type,
+				vpfe_dev->fmt.fmt.pix.field,
+				sizeof(struct videobuf_buffer),
+				fh);
+
+	fh->io_allowed = 1;
+	vpfe_dev->io_usrs = 1;
+	INIT_LIST_HEAD(&vpfe_dev->dma_queue);
+	ret = videobuf_reqbufs(&vpfe_dev->buffer_queue, req_buf);
+unlock_out:
+	mutex_unlock(&vpfe_dev->lock);
+	return ret;
+}
+
+static int vpfe_querybuf(struct file *file, void *priv,
+			 struct v4l2_buffer *buf)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querybuf\n");
+
+	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf->type) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n");
+		return  -EINVAL;
+	}
+
+	if (vpfe_dev->memory != V4L2_MEMORY_MMAP) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid memory\n");
+		return -EINVAL;
+	}
+	/* Call videobuf_querybuf to get information */
+	return videobuf_querybuf(&vpfe_dev->buffer_queue, buf);
+}
+
+static int vpfe_qbuf(struct file *file, void *priv,
+		     struct v4l2_buffer *p)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_fh *fh = file->private_data;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_qbuf\n");
+
+	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != p->type) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * If this file handle is not allowed to do IO,
+	 * return error
+	 */
+	if (!fh->io_allowed) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n");
+		return -EACCES;
+	}
+	return videobuf_qbuf(&vpfe_dev->buffer_queue, p);
+}
+
+static int vpfe_dqbuf(struct file *file, void *priv,
+		      struct v4l2_buffer *buf)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_dqbuf\n");
+
+	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf->type) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n");
+		return -EINVAL;
+	}
+	return videobuf_dqbuf(&vpfe_dev->buffer_queue,
+				      buf, file->f_flags & O_NONBLOCK);
+}
+
+/*
+ * vpfe_calculate_offsets : This function calculates buffers offset
+ * for top and bottom field
+ */
+static void vpfe_calculate_offsets(struct vpfe_device *vpfe_dev)
+{
+	struct v4l2_rect image_win;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_calculate_offsets\n");
+
+	ccdc_dev->hw_ops.get_image_window(&image_win);
+	vpfe_dev->field_off = image_win.height * image_win.width;
+}
+
+/* vpfe_start_ccdc_capture: start streaming in ccdc/isif */
+static void vpfe_start_ccdc_capture(struct vpfe_device *vpfe_dev)
+{
+	ccdc_dev->hw_ops.enable(1);
+	if (ccdc_dev->hw_ops.enable_out_to_sdram)
+		ccdc_dev->hw_ops.enable_out_to_sdram(1);
+	vpfe_dev->started = 1;
+}
+
+/*
+ * vpfe_streamon. Assume the DMA queue is not empty.
+ * application is expected to call QBUF before calling
+ * this ioctl. If not, driver returns error
+ */
+static int vpfe_streamon(struct file *file, void *priv,
+			 enum v4l2_buf_type buf_type)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_fh *fh = file->private_data;
+	struct vpfe_subdev_info *sdinfo;
+	unsigned long addr;
+	int ret = 0;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_streamon\n");
+
+	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf_type) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n");
+		return -EINVAL;
+	}
+
+	/* If file handle is not allowed IO, return error */
+	if (!fh->io_allowed) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n");
+		return -EACCES;
+	}
+
+	sdinfo = vpfe_dev->current_subdev;
+	ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
+					video, s_stream, 1);
+
+	if (ret && (ret != -ENOIOCTLCMD)) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "stream on failed in subdev\n");
+		return -EINVAL;
+	}
+
+	/* If buffer queue is empty, return error */
+	if (list_empty(&vpfe_dev->buffer_queue.stream)) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "buffer queue is empty\n");
+		return -EIO;
+	}
+
+	/* Call videobuf_streamon to start streaming * in videobuf */
+	ret = videobuf_streamon(&vpfe_dev->buffer_queue);
+	if (ret)
+		return ret;
+
+
+	ret = mutex_lock_interruptible(&vpfe_dev->lock);
+	if (ret)
+		goto streamoff;
+	/* Get the next frame from the buffer queue */
+	vpfe_dev->next_frm = list_entry(vpfe_dev->dma_queue.next,
+					struct videobuf_buffer, queue);
+	vpfe_dev->cur_frm = vpfe_dev->next_frm;
+	/* Remove buffer from the buffer queue */
+	list_del(&vpfe_dev->cur_frm->queue);
+	/* Mark state of the current frame to active */
+	vpfe_dev->cur_frm->state = VIDEOBUF_ACTIVE;
+	/* Initialize field_id and started member */
+	vpfe_dev->field_id = 0;
+	addr = videobuf_to_dma_contig(vpfe_dev->cur_frm);
+
+	/* Calculate field offset */
+	vpfe_calculate_offsets(vpfe_dev);
+
+	if (vpfe_attach_irq(vpfe_dev) < 0) {
+		v4l2_err(&vpfe_dev->v4l2_dev,
+			 "Error in attaching interrupt handle\n");
+		ret = -EFAULT;
+		goto unlock_out;
+	}
+	if (ccdc_dev->hw_ops.configure() < 0) {
+		v4l2_err(&vpfe_dev->v4l2_dev,
+			 "Error in configuring ccdc\n");
+		ret = -EINVAL;
+		goto unlock_out;
+	}
+	ccdc_dev->hw_ops.setfbaddr((unsigned long)(addr));
+	vpfe_start_ccdc_capture(vpfe_dev);
+	mutex_unlock(&vpfe_dev->lock);
+	return ret;
+unlock_out:
+	mutex_unlock(&vpfe_dev->lock);
+streamoff:
+	ret = videobuf_streamoff(&vpfe_dev->buffer_queue);
+	return ret;
+}
+
+static int vpfe_streamoff(struct file *file, void *priv,
+			  enum v4l2_buf_type buf_type)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_fh *fh = file->private_data;
+	struct vpfe_subdev_info *sdinfo;
+	int ret = 0;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_streamoff\n");
+
+	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf_type) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n");
+		return -EINVAL;
+	}
+
+	/* If io is allowed for this file handle, return error */
+	if (!fh->io_allowed) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n");
+		return -EACCES;
+	}
+
+	/* If streaming is not started, return error */
+	if (!vpfe_dev->started) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "device started\n");
+		return -EINVAL;
+	}
+
+	ret = mutex_lock_interruptible(&vpfe_dev->lock);
+	if (ret)
+		return ret;
+
+	vpfe_stop_ccdc_capture(vpfe_dev);
+	vpfe_detach_irq(vpfe_dev);
+
+	sdinfo = vpfe_dev->current_subdev;
+	ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
+					video, s_stream, 0);
+
+	if (ret && (ret != -ENOIOCTLCMD))
+		v4l2_err(&vpfe_dev->v4l2_dev, "stream off failed in subdev\n");
+	ret = videobuf_streamoff(&vpfe_dev->buffer_queue);
+	mutex_unlock(&vpfe_dev->lock);
+	return ret;
+}
+
+static int vpfe_cropcap(struct file *file, void *priv,
+			      struct v4l2_cropcap *crop)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_cropcap\n");
+
+	if (vpfe_dev->std_index > ARRAY_SIZE(vpfe_standards))
+		return -EINVAL;
+
+	memset(crop, 0, sizeof(struct v4l2_cropcap));
+	crop->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	crop->bounds.width = crop->defrect.width =
+		vpfe_standards[vpfe_dev->std_index].width;
+	crop->bounds.height = crop->defrect.height =
+		vpfe_standards[vpfe_dev->std_index].height;
+	crop->pixelaspect = vpfe_standards[vpfe_dev->std_index].pixelaspect;
+	return 0;
+}
+
+static int vpfe_g_crop(struct file *file, void *priv,
+			     struct v4l2_crop *crop)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_crop\n");
+
+	crop->c = vpfe_dev->crop;
+	return 0;
+}
+
+static int vpfe_s_crop(struct file *file, void *priv,
+			     struct v4l2_crop *crop)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	int ret = 0;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_crop\n");
+
+	if (vpfe_dev->started) {
+		/* make sure streaming is not started */
+		v4l2_err(&vpfe_dev->v4l2_dev,
+			"Cannot change crop when streaming is ON\n");
+		return -EBUSY;
+	}
+
+	ret = mutex_lock_interruptible(&vpfe_dev->lock);
+	if (ret)
+		return ret;
+
+	if (crop->c.top < 0 || crop->c.left < 0) {
+		v4l2_err(&vpfe_dev->v4l2_dev,
+			"doesn't support negative values for top & left\n");
+		ret = -EINVAL;
+		goto unlock_out;
+	}
+
+	/* adjust the width to 16 pixel boundry */
+	crop->c.width = ((crop->c.width + 15) & ~0xf);
+
+	/* make sure parameters are valid */
+	if ((crop->c.left + crop->c.width >
+		vpfe_dev->std_info.active_pixels) ||
+	    (crop->c.top + crop->c.height >
+		vpfe_dev->std_info.active_lines)) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Error in S_CROP params\n");
+		ret = -EINVAL;
+		goto unlock_out;
+	}
+	ccdc_dev->hw_ops.set_image_window(&crop->c);
+	vpfe_dev->fmt.fmt.pix.width = crop->c.width;
+	vpfe_dev->fmt.fmt.pix.height = crop->c.height;
+	vpfe_dev->fmt.fmt.pix.bytesperline =
+		ccdc_dev->hw_ops.get_line_length();
+	vpfe_dev->fmt.fmt.pix.sizeimage =
+		vpfe_dev->fmt.fmt.pix.bytesperline *
+		vpfe_dev->fmt.fmt.pix.height;
+	vpfe_dev->crop = crop->c;
+unlock_out:
+	mutex_unlock(&vpfe_dev->lock);
+	return ret;
+}
+
+
+static long vpfe_param_handler(struct file *file, void *priv,
+		int cmd, void *param)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	int ret = 0;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_param_handler\n");
+
+	if (vpfe_dev->started) {
+		/* only allowed if streaming is not started */
+		v4l2_err(&vpfe_dev->v4l2_dev, "device already started\n");
+		return -EBUSY;
+	}
+
+	ret = mutex_lock_interruptible(&vpfe_dev->lock);
+	if (ret)
+		return ret;
+
+	switch (cmd) {
+	case VPFE_CMD_S_CCDC_RAW_PARAMS:
+		v4l2_warn(&vpfe_dev->v4l2_dev,
+			  "VPFE_CMD_S_CCDC_RAW_PARAMS: experimental ioctl\n");
+		ret = ccdc_dev->hw_ops.set_params(param);
+		if (ret) {
+			v4l2_err(&vpfe_dev->v4l2_dev,
+				"Error in setting parameters in CCDC\n");
+			goto unlock_out;
+		}
+		if (vpfe_get_ccdc_image_format(vpfe_dev, &vpfe_dev->fmt) < 0) {
+			v4l2_err(&vpfe_dev->v4l2_dev,
+				"Invalid image format at CCDC\n");
+			goto unlock_out;
+		}
+		break;
+	default:
+		ret = -EINVAL;
+	}
+unlock_out:
+	mutex_unlock(&vpfe_dev->lock);
+	return ret;
+}
+
+
+/* vpfe capture ioctl operations */
+static const struct v4l2_ioctl_ops vpfe_ioctl_ops = {
+	.vidioc_querycap	 = vpfe_querycap,
+	.vidioc_g_fmt_vid_cap    = vpfe_g_fmt_vid_cap,
+	.vidioc_enum_fmt_vid_cap = vpfe_enum_fmt_vid_cap,
+	.vidioc_s_fmt_vid_cap    = vpfe_s_fmt_vid_cap,
+	.vidioc_try_fmt_vid_cap  = vpfe_try_fmt_vid_cap,
+	.vidioc_enum_input	 = vpfe_enum_input,
+	.vidioc_g_input		 = vpfe_g_input,
+	.vidioc_s_input		 = vpfe_s_input,
+	.vidioc_querystd	 = vpfe_querystd,
+	.vidioc_s_std		 = vpfe_s_std,
+	.vidioc_g_std		 = vpfe_g_std,
+	.vidioc_reqbufs		 = vpfe_reqbufs,
+	.vidioc_querybuf	 = vpfe_querybuf,
+	.vidioc_qbuf		 = vpfe_qbuf,
+	.vidioc_dqbuf		 = vpfe_dqbuf,
+	.vidioc_streamon	 = vpfe_streamon,
+	.vidioc_streamoff	 = vpfe_streamoff,
+	.vidioc_cropcap		 = vpfe_cropcap,
+	.vidioc_g_crop		 = vpfe_g_crop,
+	.vidioc_s_crop		 = vpfe_s_crop,
+	.vidioc_default		 = vpfe_param_handler,
+};
+
+static struct vpfe_device *vpfe_initialize(void)
+{
+	struct vpfe_device *vpfe_dev;
+
+	/* Default number of buffers should be 3 */
+	if ((numbuffers > 0) &&
+	    (numbuffers < config_params.min_numbuffers))
+		numbuffers = config_params.min_numbuffers;
+
+	/*
+	 * Set buffer size to min buffers size if invalid buffer size is
+	 * given
+	 */
+	if (bufsize < config_params.min_bufsize)
+		bufsize = config_params.min_bufsize;
+
+	config_params.numbuffers = numbuffers;
+
+	if (numbuffers)
+		config_params.device_bufsize = bufsize;
+
+	/* Allocate memory for device objects */
+	vpfe_dev = kzalloc(sizeof(*vpfe_dev), GFP_KERNEL);
+
+	return vpfe_dev;
+}
+
+static void vpfe_disable_clock(struct vpfe_device *vpfe_dev)
+{
+	struct vpfe_config *vpfe_cfg = vpfe_dev->cfg;
+
+	clk_disable(vpfe_cfg->vpssclk);
+	clk_put(vpfe_cfg->vpssclk);
+	clk_disable(vpfe_cfg->slaveclk);
+	clk_put(vpfe_cfg->slaveclk);
+	v4l2_info(vpfe_dev->pdev->driver,
+		 "vpfe vpss master & slave clocks disabled\n");
+}
+
+static int vpfe_enable_clock(struct vpfe_device *vpfe_dev)
+{
+	struct vpfe_config *vpfe_cfg = vpfe_dev->cfg;
+	int ret = -ENOENT;
+
+	vpfe_cfg->vpssclk = clk_get(vpfe_dev->pdev, "vpss_master");
+	if (NULL == vpfe_cfg->vpssclk) {
+		v4l2_err(vpfe_dev->pdev->driver, "No clock defined for"
+			 "vpss_master\n");
+		return ret;
+	}
+
+	if (clk_enable(vpfe_cfg->vpssclk)) {
+		v4l2_err(vpfe_dev->pdev->driver,
+			"vpfe vpss master clock not enabled\n");
+		goto out;
+	}
+	v4l2_info(vpfe_dev->pdev->driver,
+		 "vpfe vpss master clock enabled\n");
+
+	vpfe_cfg->slaveclk = clk_get(vpfe_dev->pdev, "vpss_slave");
+	if (NULL == vpfe_cfg->slaveclk) {
+		v4l2_err(vpfe_dev->pdev->driver,
+			"No clock defined for vpss slave\n");
+		goto out;
+	}
+
+	if (clk_enable(vpfe_cfg->slaveclk)) {
+		v4l2_err(vpfe_dev->pdev->driver,
+			 "vpfe vpss slave clock not enabled\n");
+		goto out;
+	}
+	v4l2_info(vpfe_dev->pdev->driver, "vpfe vpss slave clock enabled\n");
+	return 0;
+out:
+	if (vpfe_cfg->vpssclk)
+		clk_put(vpfe_cfg->vpssclk);
+	if (vpfe_cfg->slaveclk)
+		clk_put(vpfe_cfg->slaveclk);
+
+	return -1;
+}
+
+/*
+ * vpfe_probe : This function creates device entries by register
+ * itself to the V4L2 driver and initializes fields of each
+ * device objects
+ */
+static __init int vpfe_probe(struct platform_device *pdev)
+{
+	struct vpfe_subdev_info *sdinfo;
+	struct vpfe_config *vpfe_cfg;
+	struct resource *res1;
+	struct vpfe_device *vpfe_dev;
+	struct i2c_adapter *i2c_adap;
+	struct video_device *vfd;
+	int ret = -ENOMEM, i, j;
+	int num_subdevs = 0;
+
+	/* Get the pointer to the device object */
+	vpfe_dev = vpfe_initialize();
+
+	if (!vpfe_dev) {
+		v4l2_err(pdev->dev.driver,
+			"Failed to allocate memory for vpfe_dev\n");
+		return ret;
+	}
+
+	vpfe_dev->pdev = &pdev->dev;
+
+	if (NULL == pdev->dev.platform_data) {
+		v4l2_err(pdev->dev.driver, "Unable to get vpfe config\n");
+		ret = -ENOENT;
+		goto probe_free_dev_mem;
+	}
+
+	vpfe_cfg = pdev->dev.platform_data;
+	vpfe_dev->cfg = vpfe_cfg;
+	if (NULL == vpfe_cfg->ccdc ||
+	    NULL == vpfe_cfg->card_name ||
+	    NULL == vpfe_cfg->sub_devs) {
+		v4l2_err(pdev->dev.driver, "null ptr in vpfe_cfg\n");
+		ret = -ENOENT;
+		goto probe_free_dev_mem;
+	}
+
+	/* enable vpss clocks */
+	ret = vpfe_enable_clock(vpfe_dev);
+	if (ret)
+		goto probe_free_dev_mem;
+
+	mutex_lock(&ccdc_lock);
+	/* Allocate memory for ccdc configuration */
+	ccdc_cfg = kmalloc(sizeof(struct ccdc_config), GFP_KERNEL);
+	if (NULL == ccdc_cfg) {
+		v4l2_err(pdev->dev.driver,
+			 "Memory allocation failed for ccdc_cfg\n");
+		goto probe_disable_clock;
+	}
+
+	strncpy(ccdc_cfg->name, vpfe_cfg->ccdc, 32);
+	/* Get VINT0 irq resource */
+	res1 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res1) {
+		v4l2_err(pdev->dev.driver,
+			 "Unable to get interrupt for VINT0\n");
+		ret = -ENOENT;
+		goto probe_disable_clock;
+	}
+	vpfe_dev->ccdc_irq0 = res1->start;
+
+	/* Get VINT1 irq resource */
+	res1 = platform_get_resource(pdev,
+				IORESOURCE_IRQ, 1);
+	if (!res1) {
+		v4l2_err(pdev->dev.driver,
+			 "Unable to get interrupt for VINT1\n");
+		ret = -ENOENT;
+		goto probe_disable_clock;
+	}
+	vpfe_dev->ccdc_irq1 = res1->start;
+
+	/* Get address base of CCDC */
+	res1 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res1) {
+		v4l2_err(pdev->dev.driver,
+			"Unable to get register address map\n");
+		ret = -ENOENT;
+		goto probe_disable_clock;
+	}
+
+	ccdc_cfg->ccdc_addr_size = res1->end - res1->start + 1;
+	if (!request_mem_region(res1->start, ccdc_cfg->ccdc_addr_size,
+				pdev->dev.driver->name)) {
+		v4l2_err(pdev->dev.driver,
+			"Failed request_mem_region for ccdc base\n");
+		ret = -ENXIO;
+		goto probe_disable_clock;
+	}
+	ccdc_cfg->ccdc_addr = ioremap_nocache(res1->start,
+					     ccdc_cfg->ccdc_addr_size);
+	if (!ccdc_cfg->ccdc_addr) {
+		v4l2_err(pdev->dev.driver, "Unable to ioremap ccdc addr\n");
+		ret = -ENXIO;
+		goto probe_out_release_mem1;
+	}
+
+	ret = request_irq(vpfe_dev->ccdc_irq0, vpfe_isr, IRQF_DISABLED,
+			  "vpfe_capture0", vpfe_dev);
+
+	if (0 != ret) {
+		v4l2_err(pdev->dev.driver, "Unable to request interrupt\n");
+		goto probe_out_unmap1;
+	}
+
+	/* Allocate memory for video device */
+	vfd = video_device_alloc();
+	if (NULL == vfd) {
+		ret = -ENOMEM;
+		v4l2_err(pdev->dev.driver,
+			"Unable to alloc video device\n");
+		goto probe_out_release_irq;
+	}
+
+	/* Initialize field of video device */
+	vfd->release		= video_device_release;
+	vfd->fops		= &vpfe_fops;
+	vfd->ioctl_ops		= &vpfe_ioctl_ops;
+	vfd->minor		= -1;
+	vfd->tvnorms		= 0;
+	vfd->current_norm	= V4L2_STD_PAL;
+	vfd->v4l2_dev 		= &vpfe_dev->v4l2_dev;
+	snprintf(vfd->name, sizeof(vfd->name),
+		 "%s_V%d.%d.%d",
+		 CAPTURE_DRV_NAME,
+		 (VPFE_CAPTURE_VERSION_CODE >> 16) & 0xff,
+		 (VPFE_CAPTURE_VERSION_CODE >> 8) & 0xff,
+		 (VPFE_CAPTURE_VERSION_CODE) & 0xff);
+	/* Set video_dev to the video device */
+	vpfe_dev->video_dev	= vfd;
+
+	ret = v4l2_device_register(&pdev->dev, &vpfe_dev->v4l2_dev);
+	if (ret) {
+		v4l2_err(pdev->dev.driver,
+			"Unable to register v4l2 device.\n");
+		goto probe_out_video_release;
+	}
+	v4l2_info(&vpfe_dev->v4l2_dev, "v4l2 device registered\n");
+	spin_lock_init(&vpfe_dev->irqlock);
+	spin_lock_init(&vpfe_dev->dma_queue_lock);
+	mutex_init(&vpfe_dev->lock);
+
+	/* Initialize field of the device objects */
+	vpfe_dev->numbuffers = config_params.numbuffers;
+
+	/* Initialize prio member of device object */
+	v4l2_prio_init(&vpfe_dev->prio);
+	/* register video device */
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
+		"trying to register vpfe device.\n");
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
+		"video_dev=%x\n", (int)&vpfe_dev->video_dev);
+	vpfe_dev->fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	ret = video_register_device(vpfe_dev->video_dev,
+				    VFL_TYPE_GRABBER, -1);
+
+	if (ret) {
+		v4l2_err(pdev->dev.driver,
+			"Unable to register video device.\n");
+		goto probe_out_v4l2_unregister;
+	}
+
+	v4l2_info(&vpfe_dev->v4l2_dev, "video device registered\n");
+	/* set the driver data in platform device */
+	platform_set_drvdata(pdev, vpfe_dev);
+	/* set driver private data */
+	video_set_drvdata(vpfe_dev->video_dev, vpfe_dev);
+	i2c_adap = i2c_get_adapter(1);
+	vpfe_cfg = pdev->dev.platform_data;
+	num_subdevs = vpfe_cfg->num_subdevs;
+	vpfe_dev->sd = kmalloc(sizeof(struct v4l2_subdev *) * num_subdevs,
+				GFP_KERNEL);
+	if (NULL == vpfe_dev->sd) {
+		v4l2_err(&vpfe_dev->v4l2_dev,
+			"unable to allocate memory for subdevice pointers\n");
+		ret = -ENOMEM;
+		goto probe_out_video_unregister;
+	}
+
+	for (i = 0; i < num_subdevs; i++) {
+		struct v4l2_input *inps;
+
+		sdinfo = &vpfe_cfg->sub_devs[i];
+
+		/* Load up the subdevice */
+		vpfe_dev->sd[i] =
+			v4l2_i2c_new_subdev_board(&vpfe_dev->v4l2_dev,
+						  i2c_adap,
+						  sdinfo->name,
+						  &sdinfo->board_info,
+						  NULL);
+		if (vpfe_dev->sd[i]) {
+			v4l2_info(&vpfe_dev->v4l2_dev,
+				  "v4l2 sub device %s registered\n",
+				  sdinfo->name);
+			vpfe_dev->sd[i]->grp_id = sdinfo->grp_id;
+			/* update tvnorms from the sub devices */
+			for (j = 0; j < sdinfo->num_inputs; j++) {
+				inps = &sdinfo->inputs[j];
+				vfd->tvnorms |= inps->std;
+			}
+		} else {
+			v4l2_info(&vpfe_dev->v4l2_dev,
+				  "v4l2 sub device %s register fails\n",
+				  sdinfo->name);
+			goto probe_sd_out;
+		}
+	}
+
+	/* set first sub device as current one */
+	vpfe_dev->current_subdev = &vpfe_cfg->sub_devs[0];
+
+	/* We have at least one sub device to work with */
+	mutex_unlock(&ccdc_lock);
+	return 0;
+
+probe_sd_out:
+	kfree(vpfe_dev->sd);
+probe_out_video_unregister:
+	video_unregister_device(vpfe_dev->video_dev);
+probe_out_v4l2_unregister:
+	v4l2_device_unregister(&vpfe_dev->v4l2_dev);
+probe_out_video_release:
+	if (vpfe_dev->video_dev->minor == -1)
+		video_device_release(vpfe_dev->video_dev);
+probe_out_release_irq:
+	free_irq(vpfe_dev->ccdc_irq0, vpfe_dev);
+probe_out_unmap1:
+	iounmap(ccdc_cfg->ccdc_addr);
+probe_out_release_mem1:
+	release_mem_region(res1->start, res1->end - res1->start + 1);
+probe_disable_clock:
+	vpfe_disable_clock(vpfe_dev);
+	mutex_unlock(&ccdc_lock);
+	kfree(ccdc_cfg);
+probe_free_dev_mem:
+	kfree(vpfe_dev);
+	return ret;
+}
+
+/*
+ * vpfe_remove : It un-register device from V4L2 driver
+ */
+static int vpfe_remove(struct platform_device *pdev)
+{
+	struct vpfe_device *vpfe_dev = platform_get_drvdata(pdev);
+	struct resource *res;
+
+	v4l2_info(pdev->dev.driver, "vpfe_remove\n");
+
+	free_irq(vpfe_dev->ccdc_irq0, vpfe_dev);
+	kfree(vpfe_dev->sd);
+	v4l2_device_unregister(&vpfe_dev->v4l2_dev);
+	video_unregister_device(vpfe_dev->video_dev);
+	mutex_lock(&ccdc_lock);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, res->end - res->start + 1);
+	iounmap(ccdc_cfg->ccdc_addr);
+	mutex_unlock(&ccdc_lock);
+	vpfe_disable_clock(vpfe_dev);
+	kfree(vpfe_dev);
+	kfree(ccdc_cfg);
+	return 0;
+}
+
+static int
+vpfe_suspend(struct device *dev)
+{
+	/* add suspend code here later */
+	return -1;
+}
+
+static int
+vpfe_resume(struct device *dev)
+{
+	/* add resume code here later */
+	return -1;
+}
+
+static struct dev_pm_ops vpfe_dev_pm_ops = {
+	.suspend = vpfe_suspend,
+	.resume = vpfe_resume,
+};
+
+static struct platform_driver vpfe_driver = {
+	.driver = {
+		.name = CAPTURE_DRV_NAME,
+		.owner = THIS_MODULE,
+		.pm = &vpfe_dev_pm_ops,
+	},
+	.probe = vpfe_probe,
+	.remove = __devexit_p(vpfe_remove),
+};
+
+static __init int vpfe_init(void)
+{
+	printk(KERN_NOTICE "vpfe_init\n");
+	/* Register driver to the kernel */
+	return platform_driver_register(&vpfe_driver);
+}
+
+/*
+ * vpfe_cleanup : This function un-registers device driver
+ */
+static void vpfe_cleanup(void)
+{
+	platform_driver_unregister(&vpfe_driver);
+}
+
+module_init(vpfe_init);
+module_exit(vpfe_cleanup);
-- 
cgit v1.2.3


From 638c97400829a43eecc2ad924a0f5143b6c56a6d Mon Sep 17 00:00:00 2001
From: Muralidharan Karicheri <m-karicheri2@ti.com>
Date: Fri, 19 Jun 2009 09:14:10 -0300
Subject: V4L/DVB (12249): v4l: ccdc hw device header file for vpfe capture

Adds ccdc hw device header for vpfe capture driver

Reviewed by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed by: Laurent Pinchart <laurent.pinchart@skynet.be>

Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/davinci/ccdc_hw_device.h | 110 +++++++++++++++++++++++++++
 1 file changed, 110 insertions(+)
 create mode 100644 drivers/media/video/davinci/ccdc_hw_device.h

(limited to 'drivers/media')

diff --git a/drivers/media/video/davinci/ccdc_hw_device.h b/drivers/media/video/davinci/ccdc_hw_device.h
new file mode 100644
index 00000000000..86b9b351896
--- /dev/null
+++ b/drivers/media/video/davinci/ccdc_hw_device.h
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2008-2009 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * ccdc device API
+ */
+#ifndef _CCDC_HW_DEVICE_H
+#define _CCDC_HW_DEVICE_H
+
+#ifdef __KERNEL__
+#include <linux/videodev2.h>
+#include <linux/device.h>
+#include <media/davinci/vpfe_types.h>
+#include <media/davinci/ccdc_types.h>
+
+/*
+ * ccdc hw operations
+ */
+struct ccdc_hw_ops {
+	/* Pointer to initialize function to initialize ccdc device */
+	int (*open) (struct device *dev);
+	/* Pointer to deinitialize function */
+	int (*close) (struct device *dev);
+	/* set ccdc base address */
+	void (*set_ccdc_base)(void *base, int size);
+	/* Pointer to function to enable or disable ccdc */
+	void (*enable) (int en);
+	/* reset sbl. only for 6446 */
+	void (*reset) (void);
+	/* enable output to sdram */
+	void (*enable_out_to_sdram) (int en);
+	/* Pointer to function to set hw parameters */
+	int (*set_hw_if_params) (struct vpfe_hw_if_param *param);
+	/* get interface parameters */
+	int (*get_hw_if_params) (struct vpfe_hw_if_param *param);
+	/*
+	 * Pointer to function to set parameters. Used
+	 * for implementing VPFE_S_CCDC_PARAMS
+	 */
+	int (*set_params) (void *params);
+	/*
+	 * Pointer to function to get parameter. Used
+	 * for implementing VPFE_G_CCDC_PARAMS
+	 */
+	int (*get_params) (void *params);
+	/* Pointer to function to configure ccdc */
+	int (*configure) (void);
+
+	/* Pointer to function to set buffer type */
+	int (*set_buftype) (enum ccdc_buftype buf_type);
+	/* Pointer to function to get buffer type */
+	enum ccdc_buftype (*get_buftype) (void);
+	/* Pointer to function to set frame format */
+	int (*set_frame_format) (enum ccdc_frmfmt frm_fmt);
+	/* Pointer to function to get frame format */
+	enum ccdc_frmfmt (*get_frame_format) (void);
+	/* enumerate hw pix formats */
+	int (*enum_pix)(u32 *hw_pix, int i);
+	/* Pointer to function to set buffer type */
+	u32 (*get_pixel_format) (void);
+	/* Pointer to function to get pixel format. */
+	int (*set_pixel_format) (u32 pixfmt);
+	/* Pointer to function to set image window */
+	int (*set_image_window) (struct v4l2_rect *win);
+	/* Pointer to function to set image window */
+	void (*get_image_window) (struct v4l2_rect *win);
+	/* Pointer to function to get line length */
+	unsigned int (*get_line_length) (void);
+
+	/* Query CCDC control IDs */
+	int (*queryctrl)(struct v4l2_queryctrl *qctrl);
+	/* Set CCDC control */
+	int (*set_control)(struct v4l2_control *ctrl);
+	/* Get CCDC control */
+	int (*get_control)(struct v4l2_control *ctrl);
+
+	/* Pointer to function to set frame buffer address */
+	void (*setfbaddr) (unsigned long addr);
+	/* Pointer to function to get field id */
+	int (*getfid) (void);
+};
+
+struct ccdc_hw_device {
+	/* ccdc device name */
+	char name[32];
+	/* module owner */
+	struct module *owner;
+	/* hw ops */
+	struct ccdc_hw_ops hw_ops;
+};
+
+/* Used by CCDC module to register & unregister with vpfe capture driver */
+int vpfe_register_ccdc_device(struct ccdc_hw_device *dev);
+void vpfe_unregister_ccdc_device(struct ccdc_hw_device *dev);
+
+#endif
+#endif
-- 
cgit v1.2.3


From dd2ceb1a4028dc9644ed4df80cea9c05ca0b5f6d Mon Sep 17 00:00:00 2001
From: Muralidharan Karicheri <m-karicheri2@ti.com>
Date: Fri, 3 Jul 2009 05:23:07 -0300
Subject: V4L/DVB (12250): v4l: dm355 ccdc module for vpfe capture driver

Adds ccdc hw module for DM355 CCDC. This registers with the bridge
driver a set of hw_ops for configuring the CCDC for a specific
decoder device connected to vpfe.

Reviewed by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed by: Laurent Pinchart <laurent.pinchart@skynet.be>
Reviewed by: Mauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/davinci/dm355_ccdc.c      | 978 ++++++++++++++++++++++++++
 drivers/media/video/davinci/dm355_ccdc_regs.h | 310 ++++++++
 2 files changed, 1288 insertions(+)
 create mode 100644 drivers/media/video/davinci/dm355_ccdc.c
 create mode 100644 drivers/media/video/davinci/dm355_ccdc_regs.h

(limited to 'drivers/media')

diff --git a/drivers/media/video/davinci/dm355_ccdc.c b/drivers/media/video/davinci/dm355_ccdc.c
new file mode 100644
index 00000000000..4629cabe3f2
--- /dev/null
+++ b/drivers/media/video/davinci/dm355_ccdc.c
@@ -0,0 +1,978 @@
+/*
+ * Copyright (C) 2005-2009 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * CCDC hardware module for DM355
+ * ------------------------------
+ *
+ * This module is for configuring DM355 CCD controller of VPFE to capture
+ * Raw yuv or Bayer RGB data from a decoder. CCDC has several modules
+ * such as Defect Pixel Correction, Color Space Conversion etc to
+ * pre-process the Bayer RGB data, before writing it to SDRAM. This
+ * module also allows application to configure individual
+ * module parameters through VPFE_CMD_S_CCDC_RAW_PARAMS IOCTL.
+ * To do so, application include dm355_ccdc.h and vpfe_capture.h header
+ * files. The setparams() API is called by vpfe_capture driver
+ * to configure module parameters
+ *
+ * TODO: 1) Raw bayer parameter settings and bayer capture
+ * 	 2) Split module parameter structure to module specific ioctl structs
+ *	 3) add support for lense shading correction
+ *	 4) investigate if enum used for user space type definition
+ * 	    to be replaced by #defines or integer
+ */
+#include <linux/platform_device.h>
+#include <linux/uaccess.h>
+#include <linux/videodev2.h>
+#include <media/davinci/dm355_ccdc.h>
+#include <media/davinci/vpss.h>
+#include "dm355_ccdc_regs.h"
+#include "ccdc_hw_device.h"
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("CCDC Driver for DM355");
+MODULE_AUTHOR("Texas Instruments");
+
+static struct device *dev;
+
+/* Object for CCDC raw mode */
+static struct ccdc_params_raw ccdc_hw_params_raw = {
+	.pix_fmt = CCDC_PIXFMT_RAW,
+	.frm_fmt = CCDC_FRMFMT_PROGRESSIVE,
+	.win = CCDC_WIN_VGA,
+	.fid_pol = VPFE_PINPOL_POSITIVE,
+	.vd_pol = VPFE_PINPOL_POSITIVE,
+	.hd_pol = VPFE_PINPOL_POSITIVE,
+	.gain = {
+		.r_ye = 256,
+		.gb_g = 256,
+		.gr_cy = 256,
+		.b_mg = 256
+	},
+	.config_params = {
+		.datasft = 2,
+		.data_sz = CCDC_DATA_10BITS,
+		.mfilt1 = CCDC_NO_MEDIAN_FILTER1,
+		.mfilt2 = CCDC_NO_MEDIAN_FILTER2,
+		.alaw = {
+			.gama_wd = 2,
+		},
+		.blk_clamp = {
+			.sample_pixel = 1,
+			.dc_sub = 25
+		},
+		.col_pat_field0 = {
+			.olop = CCDC_GREEN_BLUE,
+			.olep = CCDC_BLUE,
+			.elop = CCDC_RED,
+			.elep = CCDC_GREEN_RED
+		},
+		.col_pat_field1 = {
+			.olop = CCDC_GREEN_BLUE,
+			.olep = CCDC_BLUE,
+			.elop = CCDC_RED,
+			.elep = CCDC_GREEN_RED
+		},
+	},
+};
+
+
+/* Object for CCDC ycbcr mode */
+static struct ccdc_params_ycbcr ccdc_hw_params_ycbcr = {
+	.win = CCDC_WIN_PAL,
+	.pix_fmt = CCDC_PIXFMT_YCBCR_8BIT,
+	.frm_fmt = CCDC_FRMFMT_INTERLACED,
+	.fid_pol = VPFE_PINPOL_POSITIVE,
+	.vd_pol = VPFE_PINPOL_POSITIVE,
+	.hd_pol = VPFE_PINPOL_POSITIVE,
+	.bt656_enable = 1,
+	.pix_order = CCDC_PIXORDER_CBYCRY,
+	.buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED
+};
+
+static enum vpfe_hw_if_type ccdc_if_type;
+static void *__iomem ccdc_base_addr;
+static int ccdc_addr_size;
+
+/* Raw Bayer formats */
+static u32 ccdc_raw_bayer_pix_formats[] =
+		{V4L2_PIX_FMT_SBGGR8, V4L2_PIX_FMT_SBGGR16};
+
+/* Raw YUV formats */
+static u32 ccdc_raw_yuv_pix_formats[] =
+		{V4L2_PIX_FMT_UYVY, V4L2_PIX_FMT_YUYV};
+
+/* register access routines */
+static inline u32 regr(u32 offset)
+{
+	return __raw_readl(ccdc_base_addr + offset);
+}
+
+static inline void regw(u32 val, u32 offset)
+{
+	__raw_writel(val, ccdc_base_addr + offset);
+}
+
+static void ccdc_set_ccdc_base(void *addr, int size)
+{
+	ccdc_base_addr = addr;
+	ccdc_addr_size = size;
+}
+
+static void ccdc_enable(int en)
+{
+	unsigned int temp;
+	temp = regr(SYNCEN);
+	temp &= (~CCDC_SYNCEN_VDHDEN_MASK);
+	temp |= (en & CCDC_SYNCEN_VDHDEN_MASK);
+	regw(temp, SYNCEN);
+}
+
+static void ccdc_enable_output_to_sdram(int en)
+{
+	unsigned int temp;
+	temp = regr(SYNCEN);
+	temp &= (~(CCDC_SYNCEN_WEN_MASK));
+	temp |= ((en << CCDC_SYNCEN_WEN_SHIFT) & CCDC_SYNCEN_WEN_MASK);
+	regw(temp, SYNCEN);
+}
+
+static void ccdc_config_gain_offset(void)
+{
+	/* configure gain */
+	regw(ccdc_hw_params_raw.gain.r_ye, RYEGAIN);
+	regw(ccdc_hw_params_raw.gain.gr_cy, GRCYGAIN);
+	regw(ccdc_hw_params_raw.gain.gb_g, GBGGAIN);
+	regw(ccdc_hw_params_raw.gain.b_mg, BMGGAIN);
+	/* configure offset */
+	regw(ccdc_hw_params_raw.ccdc_offset, OFFSET);
+}
+
+/*
+ * ccdc_restore_defaults()
+ * This function restore power on defaults in the ccdc registers
+ */
+static int ccdc_restore_defaults(void)
+{
+	int i;
+
+	dev_dbg(dev, "\nstarting ccdc_restore_defaults...");
+	/* set all registers to zero */
+	for (i = 0; i <= CCDC_REG_LAST; i += 4)
+		regw(0, i);
+
+	/* now override the values with power on defaults in registers */
+	regw(MODESET_DEFAULT, MODESET);
+	/* no culling support */
+	regw(CULH_DEFAULT, CULH);
+	regw(CULV_DEFAULT, CULV);
+	/* Set default Gain and Offset */
+	ccdc_hw_params_raw.gain.r_ye = GAIN_DEFAULT;
+	ccdc_hw_params_raw.gain.gb_g = GAIN_DEFAULT;
+	ccdc_hw_params_raw.gain.gr_cy = GAIN_DEFAULT;
+	ccdc_hw_params_raw.gain.b_mg = GAIN_DEFAULT;
+	ccdc_config_gain_offset();
+	regw(OUTCLIP_DEFAULT, OUTCLIP);
+	regw(LSCCFG2_DEFAULT, LSCCFG2);
+	/* select ccdc input */
+	if (vpss_select_ccdc_source(VPSS_CCDCIN)) {
+		dev_dbg(dev, "\ncouldn't select ccdc input source");
+		return -EFAULT;
+	}
+	/* select ccdc clock */
+	if (vpss_enable_clock(VPSS_CCDC_CLOCK, 1) < 0) {
+		dev_dbg(dev, "\ncouldn't enable ccdc clock");
+		return -EFAULT;
+	}
+	dev_dbg(dev, "\nEnd of ccdc_restore_defaults...");
+	return 0;
+}
+
+static int ccdc_open(struct device *device)
+{
+	dev = device;
+	return ccdc_restore_defaults();
+}
+
+static int ccdc_close(struct device *device)
+{
+	/* disable clock */
+	vpss_enable_clock(VPSS_CCDC_CLOCK, 0);
+	/* do nothing for now */
+	return 0;
+}
+/*
+ * ccdc_setwin()
+ * This function will configure the window size to
+ * be capture in CCDC reg.
+ */
+static void ccdc_setwin(struct v4l2_rect *image_win,
+			enum ccdc_frmfmt frm_fmt, int ppc)
+{
+	int horz_start, horz_nr_pixels;
+	int vert_start, vert_nr_lines;
+	int mid_img = 0;
+
+	dev_dbg(dev, "\nStarting ccdc_setwin...");
+
+	/*
+	 * ppc - per pixel count. indicates how many pixels per cell
+	 * output to SDRAM. example, for ycbcr, it is one y and one c, so 2.
+	 * raw capture this is 1
+	 */
+	horz_start = image_win->left << (ppc - 1);
+	horz_nr_pixels = ((image_win->width) << (ppc - 1)) - 1;
+
+	/* Writing the horizontal info into the registers */
+	regw(horz_start, SPH);
+	regw(horz_nr_pixels, NPH);
+	vert_start = image_win->top;
+
+	if (frm_fmt == CCDC_FRMFMT_INTERLACED) {
+		vert_nr_lines = (image_win->height >> 1) - 1;
+		vert_start >>= 1;
+		/* Since first line doesn't have any data */
+		vert_start += 1;
+		/* configure VDINT0 and VDINT1 */
+		regw(vert_start, VDINT0);
+	} else {
+		/* Since first line doesn't have any data */
+		vert_start += 1;
+		vert_nr_lines = image_win->height - 1;
+		/* configure VDINT0 and VDINT1 */
+		mid_img = vert_start + (image_win->height / 2);
+		regw(vert_start, VDINT0);
+		regw(mid_img, VDINT1);
+	}
+	regw(vert_start & CCDC_START_VER_ONE_MASK, SLV0);
+	regw(vert_start & CCDC_START_VER_TWO_MASK, SLV1);
+	regw(vert_nr_lines & CCDC_NUM_LINES_VER, NLV);
+	dev_dbg(dev, "\nEnd of ccdc_setwin...");
+}
+
+static int validate_ccdc_param(struct ccdc_config_params_raw *ccdcparam)
+{
+	if (ccdcparam->datasft < CCDC_DATA_NO_SHIFT ||
+	    ccdcparam->datasft > CCDC_DATA_SHIFT_6BIT) {
+		dev_dbg(dev, "Invalid value of data shift\n");
+		return -EINVAL;
+	}
+
+	if (ccdcparam->mfilt1 < CCDC_NO_MEDIAN_FILTER1 ||
+	    ccdcparam->mfilt1 > CCDC_MEDIAN_FILTER1) {
+		dev_dbg(dev, "Invalid value of median filter1\n");
+		return -EINVAL;
+	}
+
+	if (ccdcparam->mfilt2 < CCDC_NO_MEDIAN_FILTER2 ||
+	    ccdcparam->mfilt2 > CCDC_MEDIAN_FILTER2) {
+		dev_dbg(dev, "Invalid value of median filter2\n");
+		return -EINVAL;
+	}
+
+	if ((ccdcparam->med_filt_thres < 0) ||
+	   (ccdcparam->med_filt_thres > CCDC_MED_FILT_THRESH)) {
+		dev_dbg(dev, "Invalid value of median filter thresold\n");
+		return -EINVAL;
+	}
+
+	if (ccdcparam->data_sz < CCDC_DATA_16BITS ||
+	    ccdcparam->data_sz > CCDC_DATA_8BITS) {
+		dev_dbg(dev, "Invalid value of data size\n");
+		return -EINVAL;
+	}
+
+	if (ccdcparam->alaw.enable) {
+		if (ccdcparam->alaw.gama_wd < CCDC_GAMMA_BITS_13_4 ||
+		    ccdcparam->alaw.gama_wd > CCDC_GAMMA_BITS_09_0) {
+			dev_dbg(dev, "Invalid value of ALAW\n");
+			return -EINVAL;
+		}
+	}
+
+	if (ccdcparam->blk_clamp.b_clamp_enable) {
+		if (ccdcparam->blk_clamp.sample_pixel < CCDC_SAMPLE_1PIXELS ||
+		    ccdcparam->blk_clamp.sample_pixel > CCDC_SAMPLE_16PIXELS) {
+			dev_dbg(dev, "Invalid value of sample pixel\n");
+			return -EINVAL;
+		}
+		if (ccdcparam->blk_clamp.sample_ln < CCDC_SAMPLE_1LINES ||
+		    ccdcparam->blk_clamp.sample_ln > CCDC_SAMPLE_16LINES) {
+			dev_dbg(dev, "Invalid value of sample lines\n");
+			return -EINVAL;
+		}
+	}
+	return 0;
+}
+
+/* Parameter operations */
+static int ccdc_set_params(void __user *params)
+{
+	struct ccdc_config_params_raw ccdc_raw_params;
+	int x;
+
+	/* only raw module parameters can be set through the IOCTL */
+	if (ccdc_if_type != VPFE_RAW_BAYER)
+		return -EINVAL;
+
+	x = copy_from_user(&ccdc_raw_params, params, sizeof(ccdc_raw_params));
+	if (x) {
+		dev_dbg(dev, "ccdc_set_params: error in copying ccdc"
+			"params, %d\n", x);
+		return -EFAULT;
+	}
+
+	if (!validate_ccdc_param(&ccdc_raw_params)) {
+		memcpy(&ccdc_hw_params_raw.config_params,
+			&ccdc_raw_params,
+			sizeof(ccdc_raw_params));
+		return 0;
+	}
+	return -EINVAL;
+}
+
+/* This function will configure CCDC for YCbCr video capture */
+static void ccdc_config_ycbcr(void)
+{
+	struct ccdc_params_ycbcr *params = &ccdc_hw_params_ycbcr;
+	u32 temp;
+
+	/* first set the CCDC power on defaults values in all registers */
+	dev_dbg(dev, "\nStarting ccdc_config_ycbcr...");
+	ccdc_restore_defaults();
+
+	/* configure pixel format & video frame format */
+	temp = (((params->pix_fmt & CCDC_INPUT_MODE_MASK) <<
+		CCDC_INPUT_MODE_SHIFT) |
+		((params->frm_fmt & CCDC_FRM_FMT_MASK) <<
+		CCDC_FRM_FMT_SHIFT));
+
+	/* setup BT.656 sync mode */
+	if (params->bt656_enable) {
+		regw(CCDC_REC656IF_BT656_EN, REC656IF);
+		/*
+		 * configure the FID, VD, HD pin polarity fld,hd pol positive,
+		 * vd negative, 8-bit pack mode
+		 */
+		temp |= CCDC_VD_POL_NEGATIVE;
+	} else {		/* y/c external sync mode */
+		temp |= (((params->fid_pol & CCDC_FID_POL_MASK) <<
+			CCDC_FID_POL_SHIFT) |
+			((params->hd_pol & CCDC_HD_POL_MASK) <<
+			CCDC_HD_POL_SHIFT) |
+			((params->vd_pol & CCDC_VD_POL_MASK) <<
+			CCDC_VD_POL_SHIFT));
+	}
+
+	/* pack the data to 8-bit */
+	temp |= CCDC_DATA_PACK_ENABLE;
+
+	regw(temp, MODESET);
+
+	/* configure video window */
+	ccdc_setwin(&params->win, params->frm_fmt, 2);
+
+	/* configure the order of y cb cr in SD-RAM */
+	temp = (params->pix_order << CCDC_Y8POS_SHIFT);
+	temp |= CCDC_LATCH_ON_VSYNC_DISABLE | CCDC_CCDCFG_FIDMD_NO_LATCH_VSYNC;
+	regw(temp, CCDCFG);
+
+	/*
+	 * configure the horizontal line offset. This is done by rounding up
+	 * width to a multiple of 16 pixels and multiply by two to account for
+	 * y:cb:cr 4:2:2 data
+	 */
+	regw(((params->win.width * 2 + 31) >> 5), HSIZE);
+
+	/* configure the memory line offset */
+	if (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED) {
+		/* two fields are interleaved in memory */
+		regw(CCDC_SDOFST_FIELD_INTERLEAVED, SDOFST);
+	}
+
+	dev_dbg(dev, "\nEnd of ccdc_config_ycbcr...\n");
+}
+
+/*
+ * ccdc_config_black_clamp()
+ * configure parameters for Optical Black Clamp
+ */
+static void ccdc_config_black_clamp(struct ccdc_black_clamp *bclamp)
+{
+	u32 val;
+
+	if (!bclamp->b_clamp_enable) {
+		/* configure DCSub */
+		regw(bclamp->dc_sub & CCDC_BLK_DC_SUB_MASK, DCSUB);
+		regw(0x0000, CLAMP);
+		return;
+	}
+	/* Enable the Black clamping, set sample lines and pixels */
+	val = (bclamp->start_pixel & CCDC_BLK_ST_PXL_MASK) |
+	      ((bclamp->sample_pixel & CCDC_BLK_SAMPLE_LN_MASK) <<
+		CCDC_BLK_SAMPLE_LN_SHIFT) | CCDC_BLK_CLAMP_ENABLE;
+	regw(val, CLAMP);
+
+	/* If Black clamping is enable then make dcsub 0 */
+	val = (bclamp->sample_ln & CCDC_NUM_LINE_CALC_MASK)
+			<< CCDC_NUM_LINE_CALC_SHIFT;
+	regw(val, DCSUB);
+}
+
+/*
+ * ccdc_config_black_compense()
+ * configure parameters for Black Compensation
+ */
+static void ccdc_config_black_compense(struct ccdc_black_compensation *bcomp)
+{
+	u32 val;
+
+	val = (bcomp->b & CCDC_BLK_COMP_MASK) |
+		((bcomp->gb & CCDC_BLK_COMP_MASK) <<
+		CCDC_BLK_COMP_GB_COMP_SHIFT);
+	regw(val, BLKCMP1);
+
+	val = ((bcomp->gr & CCDC_BLK_COMP_MASK) <<
+		CCDC_BLK_COMP_GR_COMP_SHIFT) |
+		((bcomp->r & CCDC_BLK_COMP_MASK) <<
+		CCDC_BLK_COMP_R_COMP_SHIFT);
+	regw(val, BLKCMP0);
+}
+
+/*
+ * ccdc_write_dfc_entry()
+ * write an entry in the dfc table.
+ */
+int ccdc_write_dfc_entry(int index, struct ccdc_vertical_dft *dfc)
+{
+/* TODO This is to be re-visited and adjusted */
+#define DFC_WRITE_WAIT_COUNT	1000
+	u32 val, count = DFC_WRITE_WAIT_COUNT;
+
+	regw(dfc->dft_corr_vert[index], DFCMEM0);
+	regw(dfc->dft_corr_horz[index], DFCMEM1);
+	regw(dfc->dft_corr_sub1[index], DFCMEM2);
+	regw(dfc->dft_corr_sub2[index], DFCMEM3);
+	regw(dfc->dft_corr_sub3[index], DFCMEM4);
+	/* set WR bit to write */
+	val = regr(DFCMEMCTL) | CCDC_DFCMEMCTL_DFCMWR_MASK;
+	regw(val, DFCMEMCTL);
+
+	/*
+	 * Assume, it is very short. If we get an error, we need to
+	 * adjust this value
+	 */
+	while (regr(DFCMEMCTL) & CCDC_DFCMEMCTL_DFCMWR_MASK)
+		count--;
+	/*
+	 * TODO We expect the count to be non-zero to be successful. Adjust
+	 * the count if write requires more time
+	 */
+
+	if (count) {
+		dev_err(dev, "defect table write timeout !!!\n");
+		return -1;
+	}
+	return 0;
+}
+
+/*
+ * ccdc_config_vdfc()
+ * configure parameters for Vertical Defect Correction
+ */
+static int ccdc_config_vdfc(struct ccdc_vertical_dft *dfc)
+{
+	u32 val;
+	int i;
+
+	/* Configure General Defect Correction. The table used is from IPIPE */
+	val = dfc->gen_dft_en & CCDC_DFCCTL_GDFCEN_MASK;
+
+	/* Configure Vertical Defect Correction if needed */
+	if (!dfc->ver_dft_en) {
+		/* Enable only General Defect Correction */
+		regw(val, DFCCTL);
+		return 0;
+	}
+
+	if (dfc->table_size > CCDC_DFT_TABLE_SIZE)
+		return -EINVAL;
+
+	val |= CCDC_DFCCTL_VDFC_DISABLE;
+	val |= (dfc->dft_corr_ctl.vdfcsl & CCDC_DFCCTL_VDFCSL_MASK) <<
+		CCDC_DFCCTL_VDFCSL_SHIFT;
+	val |= (dfc->dft_corr_ctl.vdfcuda & CCDC_DFCCTL_VDFCUDA_MASK) <<
+		CCDC_DFCCTL_VDFCUDA_SHIFT;
+	val |= (dfc->dft_corr_ctl.vdflsft & CCDC_DFCCTL_VDFLSFT_MASK) <<
+		CCDC_DFCCTL_VDFLSFT_SHIFT;
+	regw(val , DFCCTL);
+
+	/* clear address ptr to offset 0 */
+	val = CCDC_DFCMEMCTL_DFCMARST_MASK << CCDC_DFCMEMCTL_DFCMARST_SHIFT;
+
+	/* write defect table entries */
+	for (i = 0; i < dfc->table_size; i++) {
+		/* increment address for non zero index */
+		if (i != 0)
+			val = CCDC_DFCMEMCTL_INC_ADDR;
+		regw(val, DFCMEMCTL);
+		if (ccdc_write_dfc_entry(i, dfc) < 0)
+			return -EFAULT;
+	}
+
+	/* update saturation level and enable dfc */
+	regw(dfc->saturation_ctl & CCDC_VDC_DFCVSAT_MASK, DFCVSAT);
+	val = regr(DFCCTL) | (CCDC_DFCCTL_VDFCEN_MASK <<
+			CCDC_DFCCTL_VDFCEN_SHIFT);
+	regw(val, DFCCTL);
+	return 0;
+}
+
+/*
+ * ccdc_config_csc()
+ * configure parameters for color space conversion
+ * Each register CSCM0-7 has two values in S8Q5 format.
+ */
+static void ccdc_config_csc(struct ccdc_csc *csc)
+{
+	u32 val1, val2;
+	int i;
+
+	if (!csc->enable)
+		return;
+
+	/* Enable the CSC sub-module */
+	regw(CCDC_CSC_ENABLE, CSCCTL);
+
+	/* Converting the co-eff as per the format of the register */
+	for (i = 0; i < CCDC_CSC_COEFF_TABLE_SIZE; i++) {
+		if ((i % 2) == 0) {
+			/* CSCM - LSB */
+			val1 = (csc->coeff[i].integer &
+				CCDC_CSC_COEF_INTEG_MASK)
+				<< CCDC_CSC_COEF_INTEG_SHIFT;
+			/*
+			 * convert decimal part to binary. Use 2 decimal
+			 * precision, user values range from .00 - 0.99
+			 */
+			val1 |= (((csc->coeff[i].decimal &
+				CCDC_CSC_COEF_DECIMAL_MASK) *
+				CCDC_CSC_DEC_MAX) / 100);
+		} else {
+
+			/* CSCM - MSB */
+			val2 = (csc->coeff[i].integer &
+				CCDC_CSC_COEF_INTEG_MASK)
+				<< CCDC_CSC_COEF_INTEG_SHIFT;
+			val2 |= (((csc->coeff[i].decimal &
+				 CCDC_CSC_COEF_DECIMAL_MASK) *
+				 CCDC_CSC_DEC_MAX) / 100);
+			val2 <<= CCDC_CSCM_MSB_SHIFT;
+			val2 |= val1;
+			regw(val2, (CSCM0 + ((i - 1) << 1)));
+		}
+	}
+}
+
+/*
+ * ccdc_config_color_patterns()
+ * configure parameters for color patterns
+ */
+static void ccdc_config_color_patterns(struct ccdc_col_pat *pat0,
+				       struct ccdc_col_pat *pat1)
+{
+	u32 val;
+
+	val = (pat0->olop | (pat0->olep << 2) | (pat0->elop << 4) |
+		(pat0->elep << 6) | (pat1->olop << 8) | (pat1->olep << 10) |
+		(pat1->elop << 12) | (pat1->elep << 14));
+	regw(val, COLPTN);
+}
+
+/* This function will configure CCDC for Raw mode image capture */
+static int ccdc_config_raw(void)
+{
+	struct ccdc_params_raw *params = &ccdc_hw_params_raw;
+	struct ccdc_config_params_raw *config_params =
+		&ccdc_hw_params_raw.config_params;
+	unsigned int val;
+
+	dev_dbg(dev, "\nStarting ccdc_config_raw...");
+
+	/* restore power on defaults to register */
+	ccdc_restore_defaults();
+
+	/* CCDCFG register:
+	 * set CCD Not to swap input since input is RAW data
+	 * set FID detection function to Latch at V-Sync
+	 * set WENLOG - ccdc valid area to AND
+	 * set TRGSEL to WENBIT
+	 * set EXTRG to DISABLE
+	 * disable latching function on VSYNC - shadowed registers
+	 */
+	regw(CCDC_YCINSWP_RAW | CCDC_CCDCFG_FIDMD_LATCH_VSYNC |
+	     CCDC_CCDCFG_WENLOG_AND | CCDC_CCDCFG_TRGSEL_WEN |
+	     CCDC_CCDCFG_EXTRG_DISABLE | CCDC_LATCH_ON_VSYNC_DISABLE, CCDCFG);
+
+	/*
+	 * Set VDHD direction to input,  input type to raw input
+	 * normal data polarity, do not use external WEN
+	 */
+	val = (CCDC_VDHDOUT_INPUT | CCDC_RAW_IP_MODE | CCDC_DATAPOL_NORMAL |
+		CCDC_EXWEN_DISABLE);
+
+	/*
+	 * Configure the vertical sync polarity (MODESET.VDPOL), horizontal
+	 * sync polarity (MODESET.HDPOL), field id polarity (MODESET.FLDPOL),
+	 * frame format(progressive or interlace), & pixel format (Input mode)
+	 */
+	val |= (((params->vd_pol & CCDC_VD_POL_MASK) << CCDC_VD_POL_SHIFT) |
+		((params->hd_pol & CCDC_HD_POL_MASK) << CCDC_HD_POL_SHIFT) |
+		((params->fid_pol & CCDC_FID_POL_MASK) << CCDC_FID_POL_SHIFT) |
+		((params->frm_fmt & CCDC_FRM_FMT_MASK) << CCDC_FRM_FMT_SHIFT) |
+		((params->pix_fmt & CCDC_PIX_FMT_MASK) << CCDC_PIX_FMT_SHIFT));
+
+	/* set pack for alaw compression */
+	if ((config_params->data_sz == CCDC_DATA_8BITS) ||
+	     config_params->alaw.enable)
+		val |= CCDC_DATA_PACK_ENABLE;
+
+	/* Configure for LPF */
+	if (config_params->lpf_enable)
+		val |= (config_params->lpf_enable & CCDC_LPF_MASK) <<
+			CCDC_LPF_SHIFT;
+
+	/* Configure the data shift */
+	val |= (config_params->datasft & CCDC_DATASFT_MASK) <<
+		CCDC_DATASFT_SHIFT;
+	regw(val , MODESET);
+	dev_dbg(dev, "\nWriting 0x%x to MODESET...\n", val);
+
+	/* Configure the Median Filter threshold */
+	regw((config_params->med_filt_thres) & CCDC_MED_FILT_THRESH, MEDFILT);
+
+	/* Configure GAMMAWD register. defaur 11-2, and Mosaic cfa pattern */
+	val = CCDC_GAMMA_BITS_11_2 << CCDC_GAMMAWD_INPUT_SHIFT |
+		CCDC_CFA_MOSAIC;
+
+	/* Enable and configure aLaw register if needed */
+	if (config_params->alaw.enable) {
+		val |= (CCDC_ALAW_ENABLE |
+			((config_params->alaw.gama_wd &
+			CCDC_ALAW_GAMA_WD_MASK) <<
+			CCDC_GAMMAWD_INPUT_SHIFT));
+	}
+
+	/* Configure Median filter1 & filter2 */
+	val |= ((config_params->mfilt1 << CCDC_MFILT1_SHIFT) |
+		(config_params->mfilt2 << CCDC_MFILT2_SHIFT));
+
+	regw(val, GAMMAWD);
+	dev_dbg(dev, "\nWriting 0x%x to GAMMAWD...\n", val);
+
+	/* configure video window */
+	ccdc_setwin(&params->win, params->frm_fmt, 1);
+
+	/* Optical Clamp Averaging */
+	ccdc_config_black_clamp(&config_params->blk_clamp);
+
+	/* Black level compensation */
+	ccdc_config_black_compense(&config_params->blk_comp);
+
+	/* Vertical Defect Correction if needed */
+	if (ccdc_config_vdfc(&config_params->vertical_dft) < 0)
+		return -EFAULT;
+
+	/* color space conversion */
+	ccdc_config_csc(&config_params->csc);
+
+	/* color pattern */
+	ccdc_config_color_patterns(&config_params->col_pat_field0,
+				   &config_params->col_pat_field1);
+
+	/* Configure the Gain  & offset control */
+	ccdc_config_gain_offset();
+
+	dev_dbg(dev, "\nWriting %x to COLPTN...\n", val);
+
+	/* Configure DATAOFST  register */
+	val = (config_params->data_offset.horz_offset & CCDC_DATAOFST_MASK) <<
+		CCDC_DATAOFST_H_SHIFT;
+	val |= (config_params->data_offset.vert_offset & CCDC_DATAOFST_MASK) <<
+		CCDC_DATAOFST_V_SHIFT;
+	regw(val, DATAOFST);
+
+	/* configuring HSIZE register */
+	val = (params->horz_flip_enable & CCDC_HSIZE_FLIP_MASK) <<
+		CCDC_HSIZE_FLIP_SHIFT;
+
+	/* If pack 8 is enable then 1 pixel will take 1 byte */
+	if ((config_params->data_sz == CCDC_DATA_8BITS) ||
+	     config_params->alaw.enable) {
+		val |= (((params->win.width) + 31) >> 5) &
+			CCDC_HSIZE_VAL_MASK;
+
+		/* adjust to multiple of 32 */
+		dev_dbg(dev, "\nWriting 0x%x to HSIZE...\n",
+		       (((params->win.width) + 31) >> 5) &
+			CCDC_HSIZE_VAL_MASK);
+	} else {
+		/* else one pixel will take 2 byte */
+		val |= (((params->win.width * 2) + 31) >> 5) &
+			CCDC_HSIZE_VAL_MASK;
+
+		dev_dbg(dev, "\nWriting 0x%x to HSIZE...\n",
+		       (((params->win.width * 2) + 31) >> 5) &
+			CCDC_HSIZE_VAL_MASK);
+	}
+	regw(val, HSIZE);
+
+	/* Configure SDOFST register */
+	if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) {
+		if (params->image_invert_enable) {
+			/* For interlace inverse mode */
+			regw(CCDC_SDOFST_INTERLACE_INVERSE, SDOFST);
+			dev_dbg(dev, "\nWriting %x to SDOFST...\n",
+				CCDC_SDOFST_INTERLACE_INVERSE);
+		} else {
+			/* For interlace non inverse mode */
+			regw(CCDC_SDOFST_INTERLACE_NORMAL, SDOFST);
+			dev_dbg(dev, "\nWriting %x to SDOFST...\n",
+				CCDC_SDOFST_INTERLACE_NORMAL);
+		}
+	} else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) {
+		if (params->image_invert_enable) {
+			/* For progessive inverse mode */
+			regw(CCDC_SDOFST_PROGRESSIVE_INVERSE, SDOFST);
+			dev_dbg(dev, "\nWriting %x to SDOFST...\n",
+				CCDC_SDOFST_PROGRESSIVE_INVERSE);
+		} else {
+			/* For progessive non inverse mode */
+			regw(CCDC_SDOFST_PROGRESSIVE_NORMAL, SDOFST);
+			dev_dbg(dev, "\nWriting %x to SDOFST...\n",
+				CCDC_SDOFST_PROGRESSIVE_NORMAL);
+		}
+	}
+	dev_dbg(dev, "\nend of ccdc_config_raw...");
+	return 0;
+}
+
+static int ccdc_configure(void)
+{
+	if (ccdc_if_type == VPFE_RAW_BAYER)
+		return ccdc_config_raw();
+	else
+		ccdc_config_ycbcr();
+	return 0;
+}
+
+static int ccdc_set_buftype(enum ccdc_buftype buf_type)
+{
+	if (ccdc_if_type == VPFE_RAW_BAYER)
+		ccdc_hw_params_raw.buf_type = buf_type;
+	else
+		ccdc_hw_params_ycbcr.buf_type = buf_type;
+	return 0;
+}
+static enum ccdc_buftype ccdc_get_buftype(void)
+{
+	if (ccdc_if_type == VPFE_RAW_BAYER)
+		return ccdc_hw_params_raw.buf_type;
+	return ccdc_hw_params_ycbcr.buf_type;
+}
+
+static int ccdc_enum_pix(u32 *pix, int i)
+{
+	int ret = -EINVAL;
+	if (ccdc_if_type == VPFE_RAW_BAYER) {
+		if (i < ARRAY_SIZE(ccdc_raw_bayer_pix_formats)) {
+			*pix = ccdc_raw_bayer_pix_formats[i];
+			ret = 0;
+		}
+	} else {
+		if (i < ARRAY_SIZE(ccdc_raw_yuv_pix_formats)) {
+			*pix = ccdc_raw_yuv_pix_formats[i];
+			ret = 0;
+		}
+	}
+	return ret;
+}
+
+static int ccdc_set_pixel_format(u32 pixfmt)
+{
+	struct ccdc_a_law *alaw =
+		&ccdc_hw_params_raw.config_params.alaw;
+
+	if (ccdc_if_type == VPFE_RAW_BAYER) {
+		ccdc_hw_params_raw.pix_fmt = CCDC_PIXFMT_RAW;
+		if (pixfmt == V4L2_PIX_FMT_SBGGR8)
+			alaw->enable = 1;
+		else if (pixfmt != V4L2_PIX_FMT_SBGGR16)
+			return -EINVAL;
+	} else {
+		if (pixfmt == V4L2_PIX_FMT_YUYV)
+			ccdc_hw_params_ycbcr.pix_order = CCDC_PIXORDER_YCBYCR;
+		else if (pixfmt == V4L2_PIX_FMT_UYVY)
+			ccdc_hw_params_ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
+		else
+			return -EINVAL;
+	}
+	return 0;
+}
+static u32 ccdc_get_pixel_format(void)
+{
+	struct ccdc_a_law *alaw =
+		&ccdc_hw_params_raw.config_params.alaw;
+	u32 pixfmt;
+
+	if (ccdc_if_type == VPFE_RAW_BAYER)
+		if (alaw->enable)
+			pixfmt = V4L2_PIX_FMT_SBGGR8;
+		else
+			pixfmt = V4L2_PIX_FMT_SBGGR16;
+	else {
+		if (ccdc_hw_params_ycbcr.pix_order == CCDC_PIXORDER_YCBYCR)
+			pixfmt = V4L2_PIX_FMT_YUYV;
+		else
+			pixfmt = V4L2_PIX_FMT_UYVY;
+	}
+	return pixfmt;
+}
+static int ccdc_set_image_window(struct v4l2_rect *win)
+{
+	if (ccdc_if_type == VPFE_RAW_BAYER)
+		ccdc_hw_params_raw.win = *win;
+	else
+		ccdc_hw_params_ycbcr.win = *win;
+	return 0;
+}
+
+static void ccdc_get_image_window(struct v4l2_rect *win)
+{
+	if (ccdc_if_type == VPFE_RAW_BAYER)
+		*win = ccdc_hw_params_raw.win;
+	else
+		*win = ccdc_hw_params_ycbcr.win;
+}
+
+static unsigned int ccdc_get_line_length(void)
+{
+	struct ccdc_config_params_raw *config_params =
+		&ccdc_hw_params_raw.config_params;
+	unsigned int len;
+
+	if (ccdc_if_type == VPFE_RAW_BAYER) {
+		if ((config_params->alaw.enable) ||
+		    (config_params->data_sz == CCDC_DATA_8BITS))
+			len = ccdc_hw_params_raw.win.width;
+		else
+			len = ccdc_hw_params_raw.win.width * 2;
+	} else
+		len = ccdc_hw_params_ycbcr.win.width * 2;
+	return ALIGN(len, 32);
+}
+
+static int ccdc_set_frame_format(enum ccdc_frmfmt frm_fmt)
+{
+	if (ccdc_if_type == VPFE_RAW_BAYER)
+		ccdc_hw_params_raw.frm_fmt = frm_fmt;
+	else
+		ccdc_hw_params_ycbcr.frm_fmt = frm_fmt;
+	return 0;
+}
+
+static enum ccdc_frmfmt ccdc_get_frame_format(void)
+{
+	if (ccdc_if_type == VPFE_RAW_BAYER)
+		return ccdc_hw_params_raw.frm_fmt;
+	else
+		return ccdc_hw_params_ycbcr.frm_fmt;
+}
+
+static int ccdc_getfid(void)
+{
+	return  (regr(MODESET) >> 15) & 1;
+}
+
+/* misc operations */
+static inline void ccdc_setfbaddr(unsigned long addr)
+{
+	regw((addr >> 21) & 0x007f, STADRH);
+	regw((addr >> 5) & 0x0ffff, STADRL);
+}
+
+static int ccdc_set_hw_if_params(struct vpfe_hw_if_param *params)
+{
+	ccdc_if_type = params->if_type;
+
+	switch (params->if_type) {
+	case VPFE_BT656:
+	case VPFE_YCBCR_SYNC_16:
+	case VPFE_YCBCR_SYNC_8:
+		ccdc_hw_params_ycbcr.vd_pol = params->vdpol;
+		ccdc_hw_params_ycbcr.hd_pol = params->hdpol;
+		break;
+	default:
+		/* TODO add support for raw bayer here */
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static struct ccdc_hw_device ccdc_hw_dev = {
+	.name = "DM355 CCDC",
+	.owner = THIS_MODULE,
+	.hw_ops = {
+		.open = ccdc_open,
+		.close = ccdc_close,
+		.set_ccdc_base = ccdc_set_ccdc_base,
+		.enable = ccdc_enable,
+		.enable_out_to_sdram = ccdc_enable_output_to_sdram,
+		.set_hw_if_params = ccdc_set_hw_if_params,
+		.set_params = ccdc_set_params,
+		.configure = ccdc_configure,
+		.set_buftype = ccdc_set_buftype,
+		.get_buftype = ccdc_get_buftype,
+		.enum_pix = ccdc_enum_pix,
+		.set_pixel_format = ccdc_set_pixel_format,
+		.get_pixel_format = ccdc_get_pixel_format,
+		.set_frame_format = ccdc_set_frame_format,
+		.get_frame_format = ccdc_get_frame_format,
+		.set_image_window = ccdc_set_image_window,
+		.get_image_window = ccdc_get_image_window,
+		.get_line_length = ccdc_get_line_length,
+		.setfbaddr = ccdc_setfbaddr,
+		.getfid = ccdc_getfid,
+	},
+};
+
+static int dm355_ccdc_init(void)
+{
+	printk(KERN_NOTICE "dm355_ccdc_init\n");
+	if (vpfe_register_ccdc_device(&ccdc_hw_dev) < 0)
+		return -1;
+	printk(KERN_NOTICE "%s is registered with vpfe.\n",
+		ccdc_hw_dev.name);
+	return 0;
+}
+
+static void dm355_ccdc_exit(void)
+{
+	vpfe_unregister_ccdc_device(&ccdc_hw_dev);
+}
+
+module_init(dm355_ccdc_init);
+module_exit(dm355_ccdc_exit);
diff --git a/drivers/media/video/davinci/dm355_ccdc_regs.h b/drivers/media/video/davinci/dm355_ccdc_regs.h
new file mode 100644
index 00000000000..d6d2ef0533b
--- /dev/null
+++ b/drivers/media/video/davinci/dm355_ccdc_regs.h
@@ -0,0 +1,310 @@
+/*
+ * Copyright (C) 2005-2009 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef _DM355_CCDC_REGS_H
+#define _DM355_CCDC_REGS_H
+
+/**************************************************************************\
+* Register OFFSET Definitions
+\**************************************************************************/
+#define SYNCEN				0x00
+#define MODESET				0x04
+#define HDWIDTH				0x08
+#define VDWIDTH				0x0c
+#define PPLN				0x10
+#define LPFR				0x14
+#define SPH				0x18
+#define NPH				0x1c
+#define SLV0				0x20
+#define SLV1				0x24
+#define NLV				0x28
+#define CULH				0x2c
+#define CULV				0x30
+#define HSIZE				0x34
+#define SDOFST				0x38
+#define STADRH				0x3c
+#define STADRL				0x40
+#define CLAMP				0x44
+#define DCSUB				0x48
+#define COLPTN				0x4c
+#define BLKCMP0				0x50
+#define BLKCMP1				0x54
+#define MEDFILT				0x58
+#define RYEGAIN				0x5c
+#define GRCYGAIN			0x60
+#define GBGGAIN				0x64
+#define BMGGAIN				0x68
+#define OFFSET				0x6c
+#define OUTCLIP				0x70
+#define VDINT0				0x74
+#define VDINT1				0x78
+#define RSV0				0x7c
+#define GAMMAWD				0x80
+#define REC656IF			0x84
+#define CCDCFG				0x88
+#define FMTCFG				0x8c
+#define FMTPLEN				0x90
+#define FMTSPH				0x94
+#define FMTLNH				0x98
+#define FMTSLV				0x9c
+#define FMTLNV				0xa0
+#define FMTRLEN				0xa4
+#define FMTHCNT				0xa8
+#define FMT_ADDR_PTR_B			0xac
+#define FMT_ADDR_PTR(i)			(FMT_ADDR_PTR_B + (i * 4))
+#define FMTPGM_VF0			0xcc
+#define FMTPGM_VF1			0xd0
+#define FMTPGM_AP0			0xd4
+#define FMTPGM_AP1			0xd8
+#define FMTPGM_AP2			0xdc
+#define FMTPGM_AP3                      0xe0
+#define FMTPGM_AP4                      0xe4
+#define FMTPGM_AP5                      0xe8
+#define FMTPGM_AP6                      0xec
+#define FMTPGM_AP7                      0xf0
+#define LSCCFG1                         0xf4
+#define LSCCFG2                         0xf8
+#define LSCH0                           0xfc
+#define LSCV0                           0x100
+#define LSCKH                           0x104
+#define LSCKV                           0x108
+#define LSCMEMCTL                       0x10c
+#define LSCMEMD                         0x110
+#define LSCMEMQ                         0x114
+#define DFCCTL                          0x118
+#define DFCVSAT                         0x11c
+#define DFCMEMCTL                       0x120
+#define DFCMEM0                         0x124
+#define DFCMEM1                         0x128
+#define DFCMEM2                         0x12c
+#define DFCMEM3                         0x130
+#define DFCMEM4                         0x134
+#define CSCCTL                          0x138
+#define CSCM0                           0x13c
+#define CSCM1                           0x140
+#define CSCM2                           0x144
+#define CSCM3                           0x148
+#define CSCM4                           0x14c
+#define CSCM5                           0x150
+#define CSCM6                           0x154
+#define CSCM7                           0x158
+#define DATAOFST			0x15c
+#define CCDC_REG_LAST			DATAOFST
+/**************************************************************
+*	Define for various register bit mask and shifts for CCDC
+*
+**************************************************************/
+#define CCDC_RAW_IP_MODE			0
+#define CCDC_VDHDOUT_INPUT			0
+#define CCDC_YCINSWP_RAW			(0 << 4)
+#define CCDC_EXWEN_DISABLE 			0
+#define CCDC_DATAPOL_NORMAL			0
+#define CCDC_CCDCFG_FIDMD_LATCH_VSYNC		0
+#define CCDC_CCDCFG_FIDMD_NO_LATCH_VSYNC	(1 << 6)
+#define CCDC_CCDCFG_WENLOG_AND			0
+#define CCDC_CCDCFG_TRGSEL_WEN			0
+#define CCDC_CCDCFG_EXTRG_DISABLE		0
+#define CCDC_CFA_MOSAIC				0
+#define CCDC_Y8POS_SHIFT			11
+
+#define CCDC_VDC_DFCVSAT_MASK			0x3fff
+#define CCDC_DATAOFST_MASK			0x0ff
+#define CCDC_DATAOFST_H_SHIFT			0
+#define CCDC_DATAOFST_V_SHIFT			8
+#define CCDC_GAMMAWD_CFA_MASK			1
+#define CCDC_GAMMAWD_CFA_SHIFT			5
+#define CCDC_GAMMAWD_INPUT_SHIFT		2
+#define CCDC_FID_POL_MASK			1
+#define CCDC_FID_POL_SHIFT			4
+#define CCDC_HD_POL_MASK			1
+#define CCDC_HD_POL_SHIFT			3
+#define CCDC_VD_POL_MASK			1
+#define CCDC_VD_POL_SHIFT			2
+#define CCDC_VD_POL_NEGATIVE			(1 << 2)
+#define CCDC_FRM_FMT_MASK			1
+#define CCDC_FRM_FMT_SHIFT			7
+#define CCDC_DATA_SZ_MASK			7
+#define CCDC_DATA_SZ_SHIFT			8
+#define CCDC_VDHDOUT_MASK			1
+#define CCDC_VDHDOUT_SHIFT			0
+#define CCDC_EXWEN_MASK				1
+#define CCDC_EXWEN_SHIFT			5
+#define CCDC_INPUT_MODE_MASK			3
+#define CCDC_INPUT_MODE_SHIFT			12
+#define CCDC_PIX_FMT_MASK			3
+#define CCDC_PIX_FMT_SHIFT			12
+#define CCDC_DATAPOL_MASK			1
+#define CCDC_DATAPOL_SHIFT			6
+#define CCDC_WEN_ENABLE				(1 << 1)
+#define CCDC_VDHDEN_ENABLE			(1 << 16)
+#define CCDC_LPF_ENABLE				(1 << 14)
+#define CCDC_ALAW_ENABLE			1
+#define CCDC_ALAW_GAMA_WD_MASK			7
+#define CCDC_REC656IF_BT656_EN			3
+
+#define CCDC_FMTCFG_FMTMODE_MASK 		3
+#define CCDC_FMTCFG_FMTMODE_SHIFT		1
+#define CCDC_FMTCFG_LNUM_MASK			3
+#define CCDC_FMTCFG_LNUM_SHIFT			4
+#define CCDC_FMTCFG_ADDRINC_MASK		7
+#define CCDC_FMTCFG_ADDRINC_SHIFT		8
+
+#define CCDC_CCDCFG_FIDMD_SHIFT			6
+#define	CCDC_CCDCFG_WENLOG_SHIFT		8
+#define CCDC_CCDCFG_TRGSEL_SHIFT		9
+#define CCDC_CCDCFG_EXTRG_SHIFT			10
+#define CCDC_CCDCFG_MSBINVI_SHIFT		13
+
+#define CCDC_HSIZE_FLIP_SHIFT			12
+#define CCDC_HSIZE_FLIP_MASK			1
+#define CCDC_HSIZE_VAL_MASK			0xFFF
+#define CCDC_SDOFST_FIELD_INTERLEAVED		0x249
+#define CCDC_SDOFST_INTERLACE_INVERSE		0x4B6D
+#define CCDC_SDOFST_INTERLACE_NORMAL		0x0B6D
+#define CCDC_SDOFST_PROGRESSIVE_INVERSE		0x4000
+#define CCDC_SDOFST_PROGRESSIVE_NORMAL		0
+#define CCDC_START_PX_HOR_MASK			0x7FFF
+#define CCDC_NUM_PX_HOR_MASK			0x7FFF
+#define CCDC_START_VER_ONE_MASK			0x7FFF
+#define CCDC_START_VER_TWO_MASK			0x7FFF
+#define CCDC_NUM_LINES_VER			0x7FFF
+
+#define CCDC_BLK_CLAMP_ENABLE			(1 << 15)
+#define CCDC_BLK_SGAIN_MASK			0x1F
+#define CCDC_BLK_ST_PXL_MASK			0x1FFF
+#define CCDC_BLK_SAMPLE_LN_MASK			3
+#define CCDC_BLK_SAMPLE_LN_SHIFT		13
+
+#define CCDC_NUM_LINE_CALC_MASK			3
+#define CCDC_NUM_LINE_CALC_SHIFT		14
+
+#define CCDC_BLK_DC_SUB_MASK			0x3FFF
+#define CCDC_BLK_COMP_MASK			0xFF
+#define CCDC_BLK_COMP_GB_COMP_SHIFT		8
+#define CCDC_BLK_COMP_GR_COMP_SHIFT		0
+#define CCDC_BLK_COMP_R_COMP_SHIFT		8
+#define CCDC_LATCH_ON_VSYNC_DISABLE		(1 << 15)
+#define CCDC_LATCH_ON_VSYNC_ENABLE		(0 << 15)
+#define CCDC_FPC_ENABLE				(1 << 15)
+#define CCDC_FPC_FPC_NUM_MASK 			0x7FFF
+#define CCDC_DATA_PACK_ENABLE			(1 << 11)
+#define CCDC_FMT_HORZ_FMTLNH_MASK		0x1FFF
+#define CCDC_FMT_HORZ_FMTSPH_MASK		0x1FFF
+#define CCDC_FMT_HORZ_FMTSPH_SHIFT		16
+#define CCDC_FMT_VERT_FMTLNV_MASK		0x1FFF
+#define CCDC_FMT_VERT_FMTSLV_MASK		0x1FFF
+#define CCDC_FMT_VERT_FMTSLV_SHIFT		16
+#define CCDC_VP_OUT_VERT_NUM_MASK		0x3FFF
+#define CCDC_VP_OUT_VERT_NUM_SHIFT		17
+#define CCDC_VP_OUT_HORZ_NUM_MASK		0x1FFF
+#define CCDC_VP_OUT_HORZ_NUM_SHIFT		4
+#define CCDC_VP_OUT_HORZ_ST_MASK		0xF
+
+#define CCDC_CSC_COEF_INTEG_MASK		7
+#define CCDC_CSC_COEF_DECIMAL_MASK		0x1f
+#define CCDC_CSC_COEF_INTEG_SHIFT		5
+#define CCDC_CSCM_MSB_SHIFT			8
+#define CCDC_CSC_ENABLE				1
+#define CCDC_CSC_DEC_MAX			32
+
+#define CCDC_MFILT1_SHIFT			10
+#define CCDC_MFILT2_SHIFT			8
+#define CCDC_MED_FILT_THRESH			0x3FFF
+#define CCDC_LPF_MASK				1
+#define CCDC_LPF_SHIFT				14
+#define CCDC_OFFSET_MASK			0x3FF
+#define CCDC_DATASFT_MASK			7
+#define CCDC_DATASFT_SHIFT			8
+
+#define CCDC_DF_ENABLE				1
+
+#define CCDC_FMTPLEN_P0_MASK			0xF
+#define CCDC_FMTPLEN_P1_MASK			0xF
+#define CCDC_FMTPLEN_P2_MASK			7
+#define CCDC_FMTPLEN_P3_MASK			7
+#define CCDC_FMTPLEN_P0_SHIFT			0
+#define CCDC_FMTPLEN_P1_SHIFT			4
+#define CCDC_FMTPLEN_P2_SHIFT			8
+#define CCDC_FMTPLEN_P3_SHIFT			12
+
+#define CCDC_FMTSPH_MASK			0x1FFF
+#define CCDC_FMTLNH_MASK			0x1FFF
+#define CCDC_FMTSLV_MASK			0x1FFF
+#define CCDC_FMTLNV_MASK			0x7FFF
+#define CCDC_FMTRLEN_MASK			0x1FFF
+#define CCDC_FMTHCNT_MASK			0x1FFF
+
+#define CCDC_ADP_INIT_MASK			0x1FFF
+#define CCDC_ADP_LINE_SHIFT			13
+#define CCDC_ADP_LINE_MASK			3
+#define CCDC_FMTPGN_APTR_MASK			7
+
+#define CCDC_DFCCTL_GDFCEN_MASK			1
+#define CCDC_DFCCTL_VDFCEN_MASK			1
+#define CCDC_DFCCTL_VDFC_DISABLE		(0 << 4)
+#define CCDC_DFCCTL_VDFCEN_SHIFT		4
+#define CCDC_DFCCTL_VDFCSL_MASK			3
+#define CCDC_DFCCTL_VDFCSL_SHIFT		5
+#define CCDC_DFCCTL_VDFCUDA_MASK		1
+#define CCDC_DFCCTL_VDFCUDA_SHIFT		7
+#define CCDC_DFCCTL_VDFLSFT_MASK		3
+#define CCDC_DFCCTL_VDFLSFT_SHIFT		8
+#define CCDC_DFCMEMCTL_DFCMARST_MASK		1
+#define CCDC_DFCMEMCTL_DFCMARST_SHIFT		2
+#define CCDC_DFCMEMCTL_DFCMWR_MASK		1
+#define CCDC_DFCMEMCTL_DFCMWR_SHIFT		0
+#define CCDC_DFCMEMCTL_INC_ADDR			(0 << 2)
+
+#define CCDC_LSCCFG_GFTSF_MASK			7
+#define CCDC_LSCCFG_GFTSF_SHIFT			1
+#define CCDC_LSCCFG_GFTINV_MASK			0xf
+#define CCDC_LSCCFG_GFTINV_SHIFT		4
+#define CCDC_LSC_GFTABLE_SEL_MASK		3
+#define CCDC_LSC_GFTABLE_EPEL_SHIFT		8
+#define CCDC_LSC_GFTABLE_OPEL_SHIFT		10
+#define CCDC_LSC_GFTABLE_EPOL_SHIFT		12
+#define CCDC_LSC_GFTABLE_OPOL_SHIFT		14
+#define CCDC_LSC_GFMODE_MASK			3
+#define CCDC_LSC_GFMODE_SHIFT			4
+#define CCDC_LSC_DISABLE			0
+#define CCDC_LSC_ENABLE				1
+#define CCDC_LSC_TABLE1_SLC			0
+#define CCDC_LSC_TABLE2_SLC			1
+#define CCDC_LSC_TABLE3_SLC			2
+#define CCDC_LSC_MEMADDR_RESET			(1 << 2)
+#define CCDC_LSC_MEMADDR_INCR			(0 << 2)
+#define CCDC_LSC_FRAC_MASK_T1			0xFF
+#define CCDC_LSC_INT_MASK			3
+#define CCDC_LSC_FRAC_MASK			0x3FFF
+#define CCDC_LSC_CENTRE_MASK			0x3FFF
+#define CCDC_LSC_COEF_MASK			0xff
+#define CCDC_LSC_COEFL_SHIFT			0
+#define CCDC_LSC_COEFU_SHIFT			8
+#define CCDC_GAIN_MASK				0x7FF
+#define CCDC_SYNCEN_VDHDEN_MASK			(1 << 0)
+#define CCDC_SYNCEN_WEN_MASK			(1 << 1)
+#define CCDC_SYNCEN_WEN_SHIFT			1
+
+/* Power on Defaults in hardware */
+#define MODESET_DEFAULT				0x200
+#define CULH_DEFAULT				0xFFFF
+#define CULV_DEFAULT				0xFF
+#define GAIN_DEFAULT				256
+#define OUTCLIP_DEFAULT				0x3FFF
+#define LSCCFG2_DEFAULT				0xE
+
+#endif
-- 
cgit v1.2.3


From 5f15fbb68fd774780a7fa8fe25a88e4c9e518109 Mon Sep 17 00:00:00 2001
From: Muralidharan Karicheri <m-karicheri2@ti.com>
Date: Fri, 19 Jun 2009 09:18:14 -0300
Subject: V4L/DVB (12251): v4l: dm644x ccdc module for vpfe capture driver

This is the hw module for DM644x CCDC. This registers with the
vpfe capture driver and provides a set of hw_ops to configure
CCDC for a specific decoder device connected to the VPFE.

Reviewed by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed by: Laurent Pinchart <laurent.pinchart@skynet.be>

Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/davinci/dm644x_ccdc.c      | 878 +++++++++++++++++++++++++
 drivers/media/video/davinci/dm644x_ccdc_regs.h | 145 ++++
 2 files changed, 1023 insertions(+)
 create mode 100644 drivers/media/video/davinci/dm644x_ccdc.c
 create mode 100644 drivers/media/video/davinci/dm644x_ccdc_regs.h

(limited to 'drivers/media')

diff --git a/drivers/media/video/davinci/dm644x_ccdc.c b/drivers/media/video/davinci/dm644x_ccdc.c
new file mode 100644
index 00000000000..2f19a919f47
--- /dev/null
+++ b/drivers/media/video/davinci/dm644x_ccdc.c
@@ -0,0 +1,878 @@
+/*
+ * Copyright (C) 2006-2009 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * CCDC hardware module for DM6446
+ * ------------------------------
+ *
+ * This module is for configuring CCD controller of DM6446 VPFE to capture
+ * Raw yuv or Bayer RGB data from a decoder. CCDC has several modules
+ * such as Defect Pixel Correction, Color Space Conversion etc to
+ * pre-process the Raw Bayer RGB data, before writing it to SDRAM. This
+ * module also allows application to configure individual
+ * module parameters through VPFE_CMD_S_CCDC_RAW_PARAMS IOCTL.
+ * To do so, application includes dm644x_ccdc.h and vpfe_capture.h header
+ * files.  The setparams() API is called by vpfe_capture driver
+ * to configure module parameters. This file is named DM644x so that other
+ * variants such DM6443 may be supported using the same module.
+ *
+ * TODO: Test Raw bayer parameter settings and bayer capture
+ * 	 Split module parameter structure to module specific ioctl structs
+ * 	 investigate if enum used for user space type definition
+ * 	 to be replaced by #defines or integer
+ */
+#include <linux/platform_device.h>
+#include <linux/uaccess.h>
+#include <linux/videodev2.h>
+#include <media/davinci/dm644x_ccdc.h>
+#include <media/davinci/vpss.h>
+#include "dm644x_ccdc_regs.h"
+#include "ccdc_hw_device.h"
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("CCDC Driver for DM6446");
+MODULE_AUTHOR("Texas Instruments");
+
+static struct device *dev;
+
+/* Object for CCDC raw mode */
+static struct ccdc_params_raw ccdc_hw_params_raw = {
+	.pix_fmt = CCDC_PIXFMT_RAW,
+	.frm_fmt = CCDC_FRMFMT_PROGRESSIVE,
+	.win = CCDC_WIN_VGA,
+	.fid_pol = VPFE_PINPOL_POSITIVE,
+	.vd_pol = VPFE_PINPOL_POSITIVE,
+	.hd_pol = VPFE_PINPOL_POSITIVE,
+	.config_params = {
+		.data_sz = CCDC_DATA_10BITS,
+	},
+};
+
+/* Object for CCDC ycbcr mode */
+static struct ccdc_params_ycbcr ccdc_hw_params_ycbcr = {
+	.pix_fmt = CCDC_PIXFMT_YCBCR_8BIT,
+	.frm_fmt = CCDC_FRMFMT_INTERLACED,
+	.win = CCDC_WIN_PAL,
+	.fid_pol = VPFE_PINPOL_POSITIVE,
+	.vd_pol = VPFE_PINPOL_POSITIVE,
+	.hd_pol = VPFE_PINPOL_POSITIVE,
+	.bt656_enable = 1,
+	.pix_order = CCDC_PIXORDER_CBYCRY,
+	.buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED
+};
+
+#define CCDC_MAX_RAW_YUV_FORMATS	2
+
+/* Raw Bayer formats */
+static u32 ccdc_raw_bayer_pix_formats[] =
+	{V4L2_PIX_FMT_SBGGR8, V4L2_PIX_FMT_SBGGR16};
+
+/* Raw YUV formats */
+static u32 ccdc_raw_yuv_pix_formats[] =
+	{V4L2_PIX_FMT_UYVY, V4L2_PIX_FMT_YUYV};
+
+static void *__iomem ccdc_base_addr;
+static int ccdc_addr_size;
+static enum vpfe_hw_if_type ccdc_if_type;
+
+/* register access routines */
+static inline u32 regr(u32 offset)
+{
+	return __raw_readl(ccdc_base_addr + offset);
+}
+
+static inline void regw(u32 val, u32 offset)
+{
+	__raw_writel(val, ccdc_base_addr + offset);
+}
+
+static void ccdc_set_ccdc_base(void *addr, int size)
+{
+	ccdc_base_addr = addr;
+	ccdc_addr_size = size;
+}
+
+static void ccdc_enable(int flag)
+{
+	regw(flag, CCDC_PCR);
+}
+
+static void ccdc_enable_vport(int flag)
+{
+	if (flag)
+		/* enable video port */
+		regw(CCDC_ENABLE_VIDEO_PORT, CCDC_FMTCFG);
+	else
+		regw(CCDC_DISABLE_VIDEO_PORT, CCDC_FMTCFG);
+}
+
+/*
+ * ccdc_setwin()
+ * This function will configure the window size
+ * to be capture in CCDC reg
+ */
+void ccdc_setwin(struct v4l2_rect *image_win,
+		enum ccdc_frmfmt frm_fmt,
+		int ppc)
+{
+	int horz_start, horz_nr_pixels;
+	int vert_start, vert_nr_lines;
+	int val = 0, mid_img = 0;
+
+	dev_dbg(dev, "\nStarting ccdc_setwin...");
+	/*
+	 * ppc - per pixel count. indicates how many pixels per cell
+	 * output to SDRAM. example, for ycbcr, it is one y and one c, so 2.
+	 * raw capture this is 1
+	 */
+	horz_start = image_win->left << (ppc - 1);
+	horz_nr_pixels = (image_win->width << (ppc - 1)) - 1;
+	regw((horz_start << CCDC_HORZ_INFO_SPH_SHIFT) | horz_nr_pixels,
+	     CCDC_HORZ_INFO);
+
+	vert_start = image_win->top;
+
+	if (frm_fmt == CCDC_FRMFMT_INTERLACED) {
+		vert_nr_lines = (image_win->height >> 1) - 1;
+		vert_start >>= 1;
+		/* Since first line doesn't have any data */
+		vert_start += 1;
+		/* configure VDINT0 */
+		val = (vert_start << CCDC_VDINT_VDINT0_SHIFT);
+		regw(val, CCDC_VDINT);
+
+	} else {
+		/* Since first line doesn't have any data */
+		vert_start += 1;
+		vert_nr_lines = image_win->height - 1;
+		/*
+		 * configure VDINT0 and VDINT1. VDINT1 will be at half
+		 * of image height
+		 */
+		mid_img = vert_start + (image_win->height / 2);
+		val = (vert_start << CCDC_VDINT_VDINT0_SHIFT) |
+		    (mid_img & CCDC_VDINT_VDINT1_MASK);
+		regw(val, CCDC_VDINT);
+
+	}
+	regw((vert_start << CCDC_VERT_START_SLV0_SHIFT) | vert_start,
+	     CCDC_VERT_START);
+	regw(vert_nr_lines, CCDC_VERT_LINES);
+	dev_dbg(dev, "\nEnd of ccdc_setwin...");
+}
+
+static void ccdc_readregs(void)
+{
+	unsigned int val = 0;
+
+	val = regr(CCDC_ALAW);
+	dev_notice(dev, "\nReading 0x%x to ALAW...\n", val);
+	val = regr(CCDC_CLAMP);
+	dev_notice(dev, "\nReading 0x%x to CLAMP...\n", val);
+	val = regr(CCDC_DCSUB);
+	dev_notice(dev, "\nReading 0x%x to DCSUB...\n", val);
+	val = regr(CCDC_BLKCMP);
+	dev_notice(dev, "\nReading 0x%x to BLKCMP...\n", val);
+	val = regr(CCDC_FPC_ADDR);
+	dev_notice(dev, "\nReading 0x%x to FPC_ADDR...\n", val);
+	val = regr(CCDC_FPC);
+	dev_notice(dev, "\nReading 0x%x to FPC...\n", val);
+	val = regr(CCDC_FMTCFG);
+	dev_notice(dev, "\nReading 0x%x to FMTCFG...\n", val);
+	val = regr(CCDC_COLPTN);
+	dev_notice(dev, "\nReading 0x%x to COLPTN...\n", val);
+	val = regr(CCDC_FMT_HORZ);
+	dev_notice(dev, "\nReading 0x%x to FMT_HORZ...\n", val);
+	val = regr(CCDC_FMT_VERT);
+	dev_notice(dev, "\nReading 0x%x to FMT_VERT...\n", val);
+	val = regr(CCDC_HSIZE_OFF);
+	dev_notice(dev, "\nReading 0x%x to HSIZE_OFF...\n", val);
+	val = regr(CCDC_SDOFST);
+	dev_notice(dev, "\nReading 0x%x to SDOFST...\n", val);
+	val = regr(CCDC_VP_OUT);
+	dev_notice(dev, "\nReading 0x%x to VP_OUT...\n", val);
+	val = regr(CCDC_SYN_MODE);
+	dev_notice(dev, "\nReading 0x%x to SYN_MODE...\n", val);
+	val = regr(CCDC_HORZ_INFO);
+	dev_notice(dev, "\nReading 0x%x to HORZ_INFO...\n", val);
+	val = regr(CCDC_VERT_START);
+	dev_notice(dev, "\nReading 0x%x to VERT_START...\n", val);
+	val = regr(CCDC_VERT_LINES);
+	dev_notice(dev, "\nReading 0x%x to VERT_LINES...\n", val);
+}
+
+static int validate_ccdc_param(struct ccdc_config_params_raw *ccdcparam)
+{
+	if (ccdcparam->alaw.enable) {
+		if ((ccdcparam->alaw.gama_wd > CCDC_GAMMA_BITS_09_0) ||
+		    (ccdcparam->alaw.gama_wd < CCDC_GAMMA_BITS_15_6) ||
+		    (ccdcparam->alaw.gama_wd < ccdcparam->data_sz)) {
+			dev_dbg(dev, "\nInvalid data line select");
+			return -1;
+		}
+	}
+	return 0;
+}
+
+static int ccdc_update_raw_params(struct ccdc_config_params_raw *raw_params)
+{
+	struct ccdc_config_params_raw *config_params =
+		&ccdc_hw_params_raw.config_params;
+	unsigned int *fpc_virtaddr = NULL;
+	unsigned int *fpc_physaddr = NULL;
+
+	memcpy(config_params, raw_params, sizeof(*raw_params));
+	/*
+	 * allocate memory for fault pixel table and copy the user
+	 * values to the table
+	 */
+	if (!config_params->fault_pxl.enable)
+		return 0;
+
+	fpc_physaddr = (unsigned int *)config_params->fault_pxl.fpc_table_addr;
+	fpc_virtaddr = (unsigned int *)phys_to_virt(
+				(unsigned long)fpc_physaddr);
+	/*
+	 * Allocate memory for FPC table if current
+	 * FPC table buffer is not big enough to
+	 * accomodate FPC Number requested
+	 */
+	if (raw_params->fault_pxl.fp_num != config_params->fault_pxl.fp_num) {
+		if (fpc_physaddr != NULL) {
+			free_pages((unsigned long)fpc_physaddr,
+				   get_order
+				   (config_params->fault_pxl.fp_num *
+				   FP_NUM_BYTES));
+		}
+
+		/* Allocate memory for FPC table */
+		fpc_virtaddr =
+			(unsigned int *)__get_free_pages(GFP_KERNEL | GFP_DMA,
+							 get_order(raw_params->
+							 fault_pxl.fp_num *
+							 FP_NUM_BYTES));
+
+		if (fpc_virtaddr == NULL) {
+			dev_dbg(dev,
+				"\nUnable to allocate memory for FPC");
+			return -EFAULT;
+		}
+		fpc_physaddr =
+		    (unsigned int *)virt_to_phys((void *)fpc_virtaddr);
+	}
+
+	/* Copy number of fault pixels and FPC table */
+	config_params->fault_pxl.fp_num = raw_params->fault_pxl.fp_num;
+	if (copy_from_user(fpc_virtaddr,
+			(void __user *)raw_params->fault_pxl.fpc_table_addr,
+			config_params->fault_pxl.fp_num * FP_NUM_BYTES)) {
+		dev_dbg(dev, "\n copy_from_user failed");
+		return -EFAULT;
+	}
+	config_params->fault_pxl.fpc_table_addr = (unsigned int)fpc_physaddr;
+	return 0;
+}
+
+static int ccdc_close(struct device *dev)
+{
+	struct ccdc_config_params_raw *config_params =
+		&ccdc_hw_params_raw.config_params;
+	unsigned int *fpc_physaddr = NULL, *fpc_virtaddr = NULL;
+
+	fpc_physaddr = (unsigned int *)config_params->fault_pxl.fpc_table_addr;
+
+	if (fpc_physaddr != NULL) {
+		fpc_virtaddr = (unsigned int *)
+		    phys_to_virt((unsigned long)fpc_physaddr);
+		free_pages((unsigned long)fpc_virtaddr,
+			   get_order(config_params->fault_pxl.fp_num *
+			   FP_NUM_BYTES));
+	}
+	return 0;
+}
+
+/*
+ * ccdc_restore_defaults()
+ * This function will write defaults to all CCDC registers
+ */
+static void ccdc_restore_defaults(void)
+{
+	int i;
+
+	/* disable CCDC */
+	ccdc_enable(0);
+	/* set all registers to default value */
+	for (i = 4; i <= 0x94; i += 4)
+		regw(0,  i);
+	regw(CCDC_NO_CULLING, CCDC_CULLING);
+	regw(CCDC_GAMMA_BITS_11_2, CCDC_ALAW);
+}
+
+static int ccdc_open(struct device *device)
+{
+	dev = device;
+	ccdc_restore_defaults();
+	if (ccdc_if_type == VPFE_RAW_BAYER)
+		ccdc_enable_vport(1);
+	return 0;
+}
+
+static void ccdc_sbl_reset(void)
+{
+	vpss_clear_wbl_overflow(VPSS_PCR_CCDC_WBL_O);
+}
+
+/* Parameter operations */
+static int ccdc_set_params(void __user *params)
+{
+	struct ccdc_config_params_raw ccdc_raw_params;
+	int x;
+
+	if (ccdc_if_type != VPFE_RAW_BAYER)
+		return -EINVAL;
+
+	x = copy_from_user(&ccdc_raw_params, params, sizeof(ccdc_raw_params));
+	if (x) {
+		dev_dbg(dev, "ccdc_set_params: error in copying"
+			   "ccdc params, %d\n", x);
+		return -EFAULT;
+	}
+
+	if (!validate_ccdc_param(&ccdc_raw_params)) {
+		if (!ccdc_update_raw_params(&ccdc_raw_params))
+			return 0;
+	}
+	return -EINVAL;
+}
+
+/*
+ * ccdc_config_ycbcr()
+ * This function will configure CCDC for YCbCr video capture
+ */
+void ccdc_config_ycbcr(void)
+{
+	struct ccdc_params_ycbcr *params = &ccdc_hw_params_ycbcr;
+	u32 syn_mode;
+
+	dev_dbg(dev, "\nStarting ccdc_config_ycbcr...");
+	/*
+	 * first restore the CCDC registers to default values
+	 * This is important since we assume default values to be set in
+	 * a lot of registers that we didn't touch
+	 */
+	ccdc_restore_defaults();
+
+	/*
+	 * configure pixel format, frame format, configure video frame
+	 * format, enable output to SDRAM, enable internal timing generator
+	 * and 8bit pack mode
+	 */
+	syn_mode = (((params->pix_fmt & CCDC_SYN_MODE_INPMOD_MASK) <<
+		    CCDC_SYN_MODE_INPMOD_SHIFT) |
+		    ((params->frm_fmt & CCDC_SYN_FLDMODE_MASK) <<
+		    CCDC_SYN_FLDMODE_SHIFT) | CCDC_VDHDEN_ENABLE |
+		    CCDC_WEN_ENABLE | CCDC_DATA_PACK_ENABLE);
+
+	/* setup BT.656 sync mode */
+	if (params->bt656_enable) {
+		regw(CCDC_REC656IF_BT656_EN, CCDC_REC656IF);
+
+		/*
+		 * configure the FID, VD, HD pin polarity,
+		 * fld,hd pol positive, vd negative, 8-bit data
+		 */
+		syn_mode |= CCDC_SYN_MODE_VD_POL_NEGATIVE | CCDC_SYN_MODE_8BITS;
+	} else {
+		/* y/c external sync mode */
+		syn_mode |= (((params->fid_pol & CCDC_FID_POL_MASK) <<
+			     CCDC_FID_POL_SHIFT) |
+			     ((params->hd_pol & CCDC_HD_POL_MASK) <<
+			     CCDC_HD_POL_SHIFT) |
+			     ((params->vd_pol & CCDC_VD_POL_MASK) <<
+			     CCDC_VD_POL_SHIFT));
+	}
+	regw(syn_mode, CCDC_SYN_MODE);
+
+	/* configure video window */
+	ccdc_setwin(&params->win, params->frm_fmt, 2);
+
+	/*
+	 * configure the order of y cb cr in SDRAM, and disable latch
+	 * internal register on vsync
+	 */
+	regw((params->pix_order << CCDC_CCDCFG_Y8POS_SHIFT) |
+		 CCDC_LATCH_ON_VSYNC_DISABLE, CCDC_CCDCFG);
+
+	/*
+	 * configure the horizontal line offset. This should be a
+	 * on 32 byte bondary. So clear LSB 5 bits
+	 */
+	regw(((params->win.width * 2  + 31) & ~0x1f), CCDC_HSIZE_OFF);
+
+	/* configure the memory line offset */
+	if (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED)
+		/* two fields are interleaved in memory */
+		regw(CCDC_SDOFST_FIELD_INTERLEAVED, CCDC_SDOFST);
+
+	ccdc_sbl_reset();
+	dev_dbg(dev, "\nEnd of ccdc_config_ycbcr...\n");
+	ccdc_readregs();
+}
+
+static void ccdc_config_black_clamp(struct ccdc_black_clamp *bclamp)
+{
+	u32 val;
+
+	if (!bclamp->enable) {
+		/* configure DCSub */
+		val = (bclamp->dc_sub) & CCDC_BLK_DC_SUB_MASK;
+		regw(val, CCDC_DCSUB);
+		dev_dbg(dev, "\nWriting 0x%x to DCSUB...\n", val);
+		regw(CCDC_CLAMP_DEFAULT_VAL, CCDC_CLAMP);
+		dev_dbg(dev, "\nWriting 0x0000 to CLAMP...\n");
+		return;
+	}
+	/*
+	 * Configure gain,  Start pixel, No of line to be avg,
+	 * No of pixel/line to be avg, & Enable the Black clamping
+	 */
+	val = ((bclamp->sgain & CCDC_BLK_SGAIN_MASK) |
+	       ((bclamp->start_pixel & CCDC_BLK_ST_PXL_MASK) <<
+		CCDC_BLK_ST_PXL_SHIFT) |
+	       ((bclamp->sample_ln & CCDC_BLK_SAMPLE_LINE_MASK) <<
+		CCDC_BLK_SAMPLE_LINE_SHIFT) |
+	       ((bclamp->sample_pixel & CCDC_BLK_SAMPLE_LN_MASK) <<
+		CCDC_BLK_SAMPLE_LN_SHIFT) | CCDC_BLK_CLAMP_ENABLE);
+	regw(val, CCDC_CLAMP);
+	dev_dbg(dev, "\nWriting 0x%x to CLAMP...\n", val);
+	/* If Black clamping is enable then make dcsub 0 */
+	regw(CCDC_DCSUB_DEFAULT_VAL, CCDC_DCSUB);
+	dev_dbg(dev, "\nWriting 0x00000000 to DCSUB...\n");
+}
+
+static void ccdc_config_black_compense(struct ccdc_black_compensation *bcomp)
+{
+	u32 val;
+
+	val = ((bcomp->b & CCDC_BLK_COMP_MASK) |
+	      ((bcomp->gb & CCDC_BLK_COMP_MASK) <<
+	       CCDC_BLK_COMP_GB_COMP_SHIFT) |
+	      ((bcomp->gr & CCDC_BLK_COMP_MASK) <<
+	       CCDC_BLK_COMP_GR_COMP_SHIFT) |
+	      ((bcomp->r & CCDC_BLK_COMP_MASK) <<
+	       CCDC_BLK_COMP_R_COMP_SHIFT));
+	regw(val, CCDC_BLKCMP);
+}
+
+static void ccdc_config_fpc(struct ccdc_fault_pixel *fpc)
+{
+	u32 val;
+
+	/* Initially disable FPC */
+	val = CCDC_FPC_DISABLE;
+	regw(val, CCDC_FPC);
+
+	if (!fpc->enable)
+		return;
+
+	/* Configure Fault pixel if needed */
+	regw(fpc->fpc_table_addr, CCDC_FPC_ADDR);
+	dev_dbg(dev, "\nWriting 0x%x to FPC_ADDR...\n",
+		       (fpc->fpc_table_addr));
+	/* Write the FPC params with FPC disable */
+	val = fpc->fp_num & CCDC_FPC_FPC_NUM_MASK;
+	regw(val, CCDC_FPC);
+
+	dev_dbg(dev, "\nWriting 0x%x to FPC...\n", val);
+	/* read the FPC register */
+	val = regr(CCDC_FPC) | CCDC_FPC_ENABLE;
+	regw(val, CCDC_FPC);
+	dev_dbg(dev, "\nWriting 0x%x to FPC...\n", val);
+}
+
+/*
+ * ccdc_config_raw()
+ * This function will configure CCDC for Raw capture mode
+ */
+void ccdc_config_raw(void)
+{
+	struct ccdc_params_raw *params = &ccdc_hw_params_raw;
+	struct ccdc_config_params_raw *config_params =
+		&ccdc_hw_params_raw.config_params;
+	unsigned int syn_mode = 0;
+	unsigned int val;
+
+	dev_dbg(dev, "\nStarting ccdc_config_raw...");
+
+	/*      Reset CCDC */
+	ccdc_restore_defaults();
+
+	/* Disable latching function registers on VSYNC  */
+	regw(CCDC_LATCH_ON_VSYNC_DISABLE, CCDC_CCDCFG);
+
+	/*
+	 * Configure the vertical sync polarity(SYN_MODE.VDPOL),
+	 * horizontal sync polarity (SYN_MODE.HDPOL), frame id polarity
+	 * (SYN_MODE.FLDPOL), frame format(progressive or interlace),
+	 * data size(SYNMODE.DATSIZ), &pixel format (Input mode), output
+	 * SDRAM, enable internal timing generator
+	 */
+	syn_mode =
+		(((params->vd_pol & CCDC_VD_POL_MASK) << CCDC_VD_POL_SHIFT) |
+		((params->hd_pol & CCDC_HD_POL_MASK) << CCDC_HD_POL_SHIFT) |
+		((params->fid_pol & CCDC_FID_POL_MASK) << CCDC_FID_POL_SHIFT) |
+		((params->frm_fmt & CCDC_FRM_FMT_MASK) << CCDC_FRM_FMT_SHIFT) |
+		((config_params->data_sz & CCDC_DATA_SZ_MASK) <<
+		CCDC_DATA_SZ_SHIFT) |
+		((params->pix_fmt & CCDC_PIX_FMT_MASK) << CCDC_PIX_FMT_SHIFT) |
+		CCDC_WEN_ENABLE | CCDC_VDHDEN_ENABLE);
+
+	/* Enable and configure aLaw register if needed */
+	if (config_params->alaw.enable) {
+		val = ((config_params->alaw.gama_wd &
+		      CCDC_ALAW_GAMA_WD_MASK) | CCDC_ALAW_ENABLE);
+		regw(val, CCDC_ALAW);
+		dev_dbg(dev, "\nWriting 0x%x to ALAW...\n", val);
+	}
+
+	/* Configure video window */
+	ccdc_setwin(&params->win, params->frm_fmt, CCDC_PPC_RAW);
+
+	/* Configure Black Clamp */
+	ccdc_config_black_clamp(&config_params->blk_clamp);
+
+	/* Configure Black level compensation */
+	ccdc_config_black_compense(&config_params->blk_comp);
+
+	/* Configure Fault Pixel Correction */
+	ccdc_config_fpc(&config_params->fault_pxl);
+
+	/* If data size is 8 bit then pack the data */
+	if ((config_params->data_sz == CCDC_DATA_8BITS) ||
+	     config_params->alaw.enable)
+		syn_mode |= CCDC_DATA_PACK_ENABLE;
+
+#ifdef CONFIG_DM644X_VIDEO_PORT_ENABLE
+	/* enable video port */
+	val = CCDC_ENABLE_VIDEO_PORT;
+#else
+	/* disable video port */
+	val = CCDC_DISABLE_VIDEO_PORT;
+#endif
+
+	if (config_params->data_sz == CCDC_DATA_8BITS)
+		val |= (CCDC_DATA_10BITS & CCDC_FMTCFG_VPIN_MASK)
+		    << CCDC_FMTCFG_VPIN_SHIFT;
+	else
+		val |= (config_params->data_sz & CCDC_FMTCFG_VPIN_MASK)
+		    << CCDC_FMTCFG_VPIN_SHIFT;
+	/* Write value in FMTCFG */
+	regw(val, CCDC_FMTCFG);
+
+	dev_dbg(dev, "\nWriting 0x%x to FMTCFG...\n", val);
+	/* Configure the color pattern according to mt9t001 sensor */
+	regw(CCDC_COLPTN_VAL, CCDC_COLPTN);
+
+	dev_dbg(dev, "\nWriting 0xBB11BB11 to COLPTN...\n");
+	/*
+	 * Configure Data formatter(Video port) pixel selection
+	 * (FMT_HORZ, FMT_VERT)
+	 */
+	val = ((params->win.left & CCDC_FMT_HORZ_FMTSPH_MASK) <<
+	      CCDC_FMT_HORZ_FMTSPH_SHIFT) |
+	      (params->win.width & CCDC_FMT_HORZ_FMTLNH_MASK);
+	regw(val, CCDC_FMT_HORZ);
+
+	dev_dbg(dev, "\nWriting 0x%x to FMT_HORZ...\n", val);
+	val = (params->win.top & CCDC_FMT_VERT_FMTSLV_MASK)
+	    << CCDC_FMT_VERT_FMTSLV_SHIFT;
+	if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE)
+		val |= (params->win.height) & CCDC_FMT_VERT_FMTLNV_MASK;
+	else
+		val |= (params->win.height >> 1) & CCDC_FMT_VERT_FMTLNV_MASK;
+
+	dev_dbg(dev, "\nparams->win.height  0x%x ...\n",
+	       params->win.height);
+	regw(val, CCDC_FMT_VERT);
+
+	dev_dbg(dev, "\nWriting 0x%x to FMT_VERT...\n", val);
+
+	dev_dbg(dev, "\nbelow regw(val, FMT_VERT)...");
+
+	/*
+	 * Configure Horizontal offset register. If pack 8 is enabled then
+	 * 1 pixel will take 1 byte
+	 */
+	if ((config_params->data_sz == CCDC_DATA_8BITS) ||
+	    config_params->alaw.enable)
+		regw((params->win.width + CCDC_32BYTE_ALIGN_VAL) &
+		    CCDC_HSIZE_OFF_MASK, CCDC_HSIZE_OFF);
+	else
+		/* else one pixel will take 2 byte */
+		regw(((params->win.width * CCDC_TWO_BYTES_PER_PIXEL) +
+		    CCDC_32BYTE_ALIGN_VAL) & CCDC_HSIZE_OFF_MASK,
+		    CCDC_HSIZE_OFF);
+
+	/* Set value for SDOFST */
+	if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) {
+		if (params->image_invert_enable) {
+			/* For intelace inverse mode */
+			regw(CCDC_INTERLACED_IMAGE_INVERT, CCDC_SDOFST);
+			dev_dbg(dev, "\nWriting 0x4B6D to SDOFST...\n");
+		}
+
+		else {
+			/* For intelace non inverse mode */
+			regw(CCDC_INTERLACED_NO_IMAGE_INVERT, CCDC_SDOFST);
+			dev_dbg(dev, "\nWriting 0x0249 to SDOFST...\n");
+		}
+	} else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) {
+		regw(CCDC_PROGRESSIVE_NO_IMAGE_INVERT, CCDC_SDOFST);
+		dev_dbg(dev, "\nWriting 0x0000 to SDOFST...\n");
+	}
+
+	/*
+	 * Configure video port pixel selection (VPOUT)
+	 * Here -1 is to make the height value less than FMT_VERT.FMTLNV
+	 */
+	if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE)
+		val = (((params->win.height - 1) & CCDC_VP_OUT_VERT_NUM_MASK))
+		    << CCDC_VP_OUT_VERT_NUM_SHIFT;
+	else
+		val =
+		    ((((params->win.height >> CCDC_INTERLACED_HEIGHT_SHIFT) -
+		     1) & CCDC_VP_OUT_VERT_NUM_MASK)) <<
+		    CCDC_VP_OUT_VERT_NUM_SHIFT;
+
+	val |= ((((params->win.width))) & CCDC_VP_OUT_HORZ_NUM_MASK)
+	    << CCDC_VP_OUT_HORZ_NUM_SHIFT;
+	val |= (params->win.left) & CCDC_VP_OUT_HORZ_ST_MASK;
+	regw(val, CCDC_VP_OUT);
+
+	dev_dbg(dev, "\nWriting 0x%x to VP_OUT...\n", val);
+	regw(syn_mode, CCDC_SYN_MODE);
+	dev_dbg(dev, "\nWriting 0x%x to SYN_MODE...\n", syn_mode);
+
+	ccdc_sbl_reset();
+	dev_dbg(dev, "\nend of ccdc_config_raw...");
+	ccdc_readregs();
+}
+
+static int ccdc_configure(void)
+{
+	if (ccdc_if_type == VPFE_RAW_BAYER)
+		ccdc_config_raw();
+	else
+		ccdc_config_ycbcr();
+	return 0;
+}
+
+static int ccdc_set_buftype(enum ccdc_buftype buf_type)
+{
+	if (ccdc_if_type == VPFE_RAW_BAYER)
+		ccdc_hw_params_raw.buf_type = buf_type;
+	else
+		ccdc_hw_params_ycbcr.buf_type = buf_type;
+	return 0;
+}
+
+static enum ccdc_buftype ccdc_get_buftype(void)
+{
+	if (ccdc_if_type == VPFE_RAW_BAYER)
+		return ccdc_hw_params_raw.buf_type;
+	return ccdc_hw_params_ycbcr.buf_type;
+}
+
+static int ccdc_enum_pix(u32 *pix, int i)
+{
+	int ret = -EINVAL;
+	if (ccdc_if_type == VPFE_RAW_BAYER) {
+		if (i < ARRAY_SIZE(ccdc_raw_bayer_pix_formats)) {
+			*pix = ccdc_raw_bayer_pix_formats[i];
+			ret = 0;
+		}
+	} else {
+		if (i < ARRAY_SIZE(ccdc_raw_yuv_pix_formats)) {
+			*pix = ccdc_raw_yuv_pix_formats[i];
+			ret = 0;
+		}
+	}
+	return ret;
+}
+
+static int ccdc_set_pixel_format(u32 pixfmt)
+{
+	if (ccdc_if_type == VPFE_RAW_BAYER) {
+		ccdc_hw_params_raw.pix_fmt = CCDC_PIXFMT_RAW;
+		if (pixfmt == V4L2_PIX_FMT_SBGGR8)
+			ccdc_hw_params_raw.config_params.alaw.enable = 1;
+		else if (pixfmt != V4L2_PIX_FMT_SBGGR16)
+			return -EINVAL;
+	} else {
+		if (pixfmt == V4L2_PIX_FMT_YUYV)
+			ccdc_hw_params_ycbcr.pix_order = CCDC_PIXORDER_YCBYCR;
+		else if (pixfmt == V4L2_PIX_FMT_UYVY)
+			ccdc_hw_params_ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
+		else
+			return -EINVAL;
+	}
+	return 0;
+}
+
+static u32 ccdc_get_pixel_format(void)
+{
+	struct ccdc_a_law *alaw =
+		&ccdc_hw_params_raw.config_params.alaw;
+	u32 pixfmt;
+
+	if (ccdc_if_type == VPFE_RAW_BAYER)
+		if (alaw->enable)
+			pixfmt = V4L2_PIX_FMT_SBGGR8;
+		else
+			pixfmt = V4L2_PIX_FMT_SBGGR16;
+	else {
+		if (ccdc_hw_params_ycbcr.pix_order == CCDC_PIXORDER_YCBYCR)
+			pixfmt = V4L2_PIX_FMT_YUYV;
+		else
+			pixfmt = V4L2_PIX_FMT_UYVY;
+	}
+	return pixfmt;
+}
+
+static int ccdc_set_image_window(struct v4l2_rect *win)
+{
+	if (ccdc_if_type == VPFE_RAW_BAYER)
+		ccdc_hw_params_raw.win = *win;
+	else
+		ccdc_hw_params_ycbcr.win = *win;
+	return 0;
+}
+
+static void ccdc_get_image_window(struct v4l2_rect *win)
+{
+	if (ccdc_if_type == VPFE_RAW_BAYER)
+		*win = ccdc_hw_params_raw.win;
+	else
+		*win = ccdc_hw_params_ycbcr.win;
+}
+
+static unsigned int ccdc_get_line_length(void)
+{
+	struct ccdc_config_params_raw *config_params =
+		&ccdc_hw_params_raw.config_params;
+	unsigned int len;
+
+	if (ccdc_if_type == VPFE_RAW_BAYER) {
+		if ((config_params->alaw.enable) ||
+		    (config_params->data_sz == CCDC_DATA_8BITS))
+			len = ccdc_hw_params_raw.win.width;
+		else
+			len = ccdc_hw_params_raw.win.width * 2;
+	} else
+		len = ccdc_hw_params_ycbcr.win.width * 2;
+	return ALIGN(len, 32);
+}
+
+static int ccdc_set_frame_format(enum ccdc_frmfmt frm_fmt)
+{
+	if (ccdc_if_type == VPFE_RAW_BAYER)
+		ccdc_hw_params_raw.frm_fmt = frm_fmt;
+	else
+		ccdc_hw_params_ycbcr.frm_fmt = frm_fmt;
+	return 0;
+}
+
+static enum ccdc_frmfmt ccdc_get_frame_format(void)
+{
+	if (ccdc_if_type == VPFE_RAW_BAYER)
+		return ccdc_hw_params_raw.frm_fmt;
+	else
+		return ccdc_hw_params_ycbcr.frm_fmt;
+}
+
+static int ccdc_getfid(void)
+{
+	return (regr(CCDC_SYN_MODE) >> 15) & 1;
+}
+
+/* misc operations */
+static inline void ccdc_setfbaddr(unsigned long addr)
+{
+	regw(addr & 0xffffffe0, CCDC_SDR_ADDR);
+}
+
+static int ccdc_set_hw_if_params(struct vpfe_hw_if_param *params)
+{
+	ccdc_if_type = params->if_type;
+
+	switch (params->if_type) {
+	case VPFE_BT656:
+	case VPFE_YCBCR_SYNC_16:
+	case VPFE_YCBCR_SYNC_8:
+		ccdc_hw_params_ycbcr.vd_pol = params->vdpol;
+		ccdc_hw_params_ycbcr.hd_pol = params->hdpol;
+		break;
+	default:
+		/* TODO add support for raw bayer here */
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static struct ccdc_hw_device ccdc_hw_dev = {
+	.name = "DM6446 CCDC",
+	.owner = THIS_MODULE,
+	.hw_ops = {
+		.open = ccdc_open,
+		.close = ccdc_close,
+		.set_ccdc_base = ccdc_set_ccdc_base,
+		.reset = ccdc_sbl_reset,
+		.enable = ccdc_enable,
+		.set_hw_if_params = ccdc_set_hw_if_params,
+		.set_params = ccdc_set_params,
+		.configure = ccdc_configure,
+		.set_buftype = ccdc_set_buftype,
+		.get_buftype = ccdc_get_buftype,
+		.enum_pix = ccdc_enum_pix,
+		.set_pixel_format = ccdc_set_pixel_format,
+		.get_pixel_format = ccdc_get_pixel_format,
+		.set_frame_format = ccdc_set_frame_format,
+		.get_frame_format = ccdc_get_frame_format,
+		.set_image_window = ccdc_set_image_window,
+		.get_image_window = ccdc_get_image_window,
+		.get_line_length = ccdc_get_line_length,
+		.setfbaddr = ccdc_setfbaddr,
+		.getfid = ccdc_getfid,
+	},
+};
+
+static int dm644x_ccdc_init(void)
+{
+	printk(KERN_NOTICE "dm644x_ccdc_init\n");
+	if (vpfe_register_ccdc_device(&ccdc_hw_dev) < 0)
+		return -1;
+	printk(KERN_NOTICE "%s is registered with vpfe.\n",
+		ccdc_hw_dev.name);
+	return 0;
+}
+
+static void dm644x_ccdc_exit(void)
+{
+	vpfe_unregister_ccdc_device(&ccdc_hw_dev);
+}
+
+module_init(dm644x_ccdc_init);
+module_exit(dm644x_ccdc_exit);
diff --git a/drivers/media/video/davinci/dm644x_ccdc_regs.h b/drivers/media/video/davinci/dm644x_ccdc_regs.h
new file mode 100644
index 00000000000..6e5d0532446
--- /dev/null
+++ b/drivers/media/video/davinci/dm644x_ccdc_regs.h
@@ -0,0 +1,145 @@
+/*
+ * Copyright (C) 2006-2009 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef _DM644X_CCDC_REGS_H
+#define _DM644X_CCDC_REGS_H
+
+/**************************************************************************\
+* Register OFFSET Definitions
+\**************************************************************************/
+#define CCDC_PID				0x0
+#define CCDC_PCR				0x4
+#define CCDC_SYN_MODE				0x8
+#define CCDC_HD_VD_WID				0xc
+#define CCDC_PIX_LINES				0x10
+#define CCDC_HORZ_INFO				0x14
+#define CCDC_VERT_START				0x18
+#define CCDC_VERT_LINES				0x1c
+#define CCDC_CULLING				0x20
+#define CCDC_HSIZE_OFF				0x24
+#define CCDC_SDOFST				0x28
+#define CCDC_SDR_ADDR				0x2c
+#define CCDC_CLAMP				0x30
+#define CCDC_DCSUB				0x34
+#define CCDC_COLPTN				0x38
+#define CCDC_BLKCMP				0x3c
+#define CCDC_FPC				0x40
+#define CCDC_FPC_ADDR				0x44
+#define CCDC_VDINT				0x48
+#define CCDC_ALAW				0x4c
+#define CCDC_REC656IF				0x50
+#define CCDC_CCDCFG				0x54
+#define CCDC_FMTCFG				0x58
+#define CCDC_FMT_HORZ				0x5c
+#define CCDC_FMT_VERT				0x60
+#define CCDC_FMT_ADDR0				0x64
+#define CCDC_FMT_ADDR1				0x68
+#define CCDC_FMT_ADDR2				0x6c
+#define CCDC_FMT_ADDR3				0x70
+#define CCDC_FMT_ADDR4				0x74
+#define CCDC_FMT_ADDR5				0x78
+#define CCDC_FMT_ADDR6				0x7c
+#define CCDC_FMT_ADDR7				0x80
+#define CCDC_PRGEVEN_0				0x84
+#define CCDC_PRGEVEN_1				0x88
+#define CCDC_PRGODD_0				0x8c
+#define CCDC_PRGODD_1				0x90
+#define CCDC_VP_OUT				0x94
+
+
+/***************************************************************
+*	Define for various register bit mask and shifts for CCDC
+****************************************************************/
+#define CCDC_FID_POL_MASK			1
+#define CCDC_FID_POL_SHIFT			4
+#define CCDC_HD_POL_MASK			1
+#define CCDC_HD_POL_SHIFT			3
+#define CCDC_VD_POL_MASK			1
+#define CCDC_VD_POL_SHIFT			2
+#define CCDC_HSIZE_OFF_MASK			0xffffffe0
+#define CCDC_32BYTE_ALIGN_VAL			31
+#define CCDC_FRM_FMT_MASK			0x1
+#define CCDC_FRM_FMT_SHIFT			7
+#define CCDC_DATA_SZ_MASK			7
+#define CCDC_DATA_SZ_SHIFT			8
+#define CCDC_PIX_FMT_MASK			3
+#define CCDC_PIX_FMT_SHIFT			12
+#define CCDC_VP2SDR_DISABLE			0xFFFBFFFF
+#define CCDC_WEN_ENABLE				(1 << 17)
+#define CCDC_SDR2RSZ_DISABLE			0xFFF7FFFF
+#define CCDC_VDHDEN_ENABLE			(1 << 16)
+#define CCDC_LPF_ENABLE				(1 << 14)
+#define CCDC_ALAW_ENABLE			(1 << 3)
+#define CCDC_ALAW_GAMA_WD_MASK			7
+#define CCDC_BLK_CLAMP_ENABLE			(1 << 31)
+#define CCDC_BLK_SGAIN_MASK			0x1F
+#define CCDC_BLK_ST_PXL_MASK			0x7FFF
+#define CCDC_BLK_ST_PXL_SHIFT			10
+#define CCDC_BLK_SAMPLE_LN_MASK			7
+#define CCDC_BLK_SAMPLE_LN_SHIFT		28
+#define CCDC_BLK_SAMPLE_LINE_MASK		7
+#define CCDC_BLK_SAMPLE_LINE_SHIFT		25
+#define CCDC_BLK_DC_SUB_MASK			0x03FFF
+#define CCDC_BLK_COMP_MASK			0xFF
+#define CCDC_BLK_COMP_GB_COMP_SHIFT		8
+#define CCDC_BLK_COMP_GR_COMP_SHIFT		16
+#define CCDC_BLK_COMP_R_COMP_SHIFT		24
+#define CCDC_LATCH_ON_VSYNC_DISABLE		(1 << 15)
+#define CCDC_FPC_ENABLE				(1 << 15)
+#define CCDC_FPC_DISABLE			0
+#define CCDC_FPC_FPC_NUM_MASK 			0x7FFF
+#define CCDC_DATA_PACK_ENABLE			(1 << 11)
+#define CCDC_FMTCFG_VPIN_MASK			7
+#define CCDC_FMTCFG_VPIN_SHIFT			12
+#define CCDC_FMT_HORZ_FMTLNH_MASK		0x1FFF
+#define CCDC_FMT_HORZ_FMTSPH_MASK		0x1FFF
+#define CCDC_FMT_HORZ_FMTSPH_SHIFT		16
+#define CCDC_FMT_VERT_FMTLNV_MASK		0x1FFF
+#define CCDC_FMT_VERT_FMTSLV_MASK		0x1FFF
+#define CCDC_FMT_VERT_FMTSLV_SHIFT		16
+#define CCDC_VP_OUT_VERT_NUM_MASK		0x3FFF
+#define CCDC_VP_OUT_VERT_NUM_SHIFT		17
+#define CCDC_VP_OUT_HORZ_NUM_MASK		0x1FFF
+#define CCDC_VP_OUT_HORZ_NUM_SHIFT		4
+#define CCDC_VP_OUT_HORZ_ST_MASK		0xF
+#define CCDC_HORZ_INFO_SPH_SHIFT		16
+#define CCDC_VERT_START_SLV0_SHIFT		16
+#define CCDC_VDINT_VDINT0_SHIFT			16
+#define CCDC_VDINT_VDINT1_MASK			0xFFFF
+#define CCDC_PPC_RAW				1
+#define CCDC_DCSUB_DEFAULT_VAL			0
+#define CCDC_CLAMP_DEFAULT_VAL			0
+#define CCDC_ENABLE_VIDEO_PORT			0x8000
+#define CCDC_DISABLE_VIDEO_PORT			0
+#define CCDC_COLPTN_VAL				0xBB11BB11
+#define CCDC_TWO_BYTES_PER_PIXEL		2
+#define CCDC_INTERLACED_IMAGE_INVERT		0x4B6D
+#define CCDC_INTERLACED_NO_IMAGE_INVERT		0x0249
+#define CCDC_PROGRESSIVE_IMAGE_INVERT		0x4000
+#define CCDC_PROGRESSIVE_NO_IMAGE_INVERT	0
+#define CCDC_INTERLACED_HEIGHT_SHIFT		1
+#define CCDC_SYN_MODE_INPMOD_SHIFT		12
+#define CCDC_SYN_MODE_INPMOD_MASK		3
+#define CCDC_SYN_MODE_8BITS			(7 << 8)
+#define CCDC_SYN_FLDMODE_MASK			1
+#define CCDC_SYN_FLDMODE_SHIFT			7
+#define CCDC_REC656IF_BT656_EN			3
+#define CCDC_SYN_MODE_VD_POL_NEGATIVE		(1 << 2)
+#define CCDC_CCDCFG_Y8POS_SHIFT			11
+#define CCDC_SDOFST_FIELD_INTERLEAVED		0x249
+#define CCDC_NO_CULLING				0xffff00ff
+#endif
-- 
cgit v1.2.3


From 7b140b89307a59527df644100ce5ab3bc1be7d1b Mon Sep 17 00:00:00 2001
From: Muralidharan Karicheri <m-karicheri2@ti.com>
Date: Fri, 19 Jun 2009 09:20:16 -0300
Subject: V4L/DVB (12253): v4l: common vpss module for video drivers

This is a new module added for vpss library functions that are
used for configuring vpss system module. All video drivers will
include vpss.h header file and call functions defined in this
module to configure vpss system module.

Reviewed by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed by: Laurent Pinchart <laurent.pinchart@skynet.be>
Reviewed by: Alexey Klimov <klimov.linux@gmail.com>
Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/davinci/vpss.c | 301 +++++++++++++++++++++++++++++++++++++
 1 file changed, 301 insertions(+)
 create mode 100644 drivers/media/video/davinci/vpss.c

(limited to 'drivers/media')

diff --git a/drivers/media/video/davinci/vpss.c b/drivers/media/video/davinci/vpss.c
new file mode 100644
index 00000000000..6d709ca8cfb
--- /dev/null
+++ b/drivers/media/video/davinci/vpss.c
@@ -0,0 +1,301 @@
+/*
+ * Copyright (C) 2009 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * common vpss driver for all video drivers.
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/compiler.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <media/davinci/vpss.h>
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("VPSS Driver");
+MODULE_AUTHOR("Texas Instruments");
+
+/* DM644x defines */
+#define DM644X_SBL_PCR_VPSS		(4)
+
+/* vpss BL register offsets */
+#define DM355_VPSSBL_CCDCMUX		0x1c
+/* vpss CLK register offsets */
+#define DM355_VPSSCLK_CLKCTRL		0x04
+/* masks and shifts */
+#define VPSS_HSSISEL_SHIFT		4
+
+/*
+ * vpss operations. Depends on platform. Not all functions are available
+ * on all platforms. The api, first check if a functio is available before
+ * invoking it. In the probe, the function ptrs are intialized based on
+ * vpss name. vpss name can be "dm355_vpss", "dm644x_vpss" etc.
+ */
+struct vpss_hw_ops {
+	/* enable clock */
+	int (*enable_clock)(enum vpss_clock_sel clock_sel, int en);
+	/* select input to ccdc */
+	void (*select_ccdc_source)(enum vpss_ccdc_source_sel src_sel);
+	/* clear wbl overlflow bit */
+	int (*clear_wbl_overflow)(enum vpss_wbl_sel wbl_sel);
+};
+
+/* vpss configuration */
+struct vpss_oper_config {
+	__iomem void *vpss_bl_regs_base;
+	__iomem void *vpss_regs_base;
+	struct resource		*r1;
+	resource_size_t		len1;
+	struct resource		*r2;
+	resource_size_t		len2;
+	char vpss_name[32];
+	spinlock_t vpss_lock;
+	struct vpss_hw_ops hw_ops;
+};
+
+static struct vpss_oper_config oper_cfg;
+
+/* register access routines */
+static inline u32 bl_regr(u32 offset)
+{
+	return __raw_readl(oper_cfg.vpss_bl_regs_base + offset);
+}
+
+static inline void bl_regw(u32 val, u32 offset)
+{
+	__raw_writel(val, oper_cfg.vpss_bl_regs_base + offset);
+}
+
+static inline u32 vpss_regr(u32 offset)
+{
+	return __raw_readl(oper_cfg.vpss_regs_base + offset);
+}
+
+static inline void vpss_regw(u32 val, u32 offset)
+{
+	__raw_writel(val, oper_cfg.vpss_regs_base + offset);
+}
+
+static void dm355_select_ccdc_source(enum vpss_ccdc_source_sel src_sel)
+{
+	bl_regw(src_sel << VPSS_HSSISEL_SHIFT, DM355_VPSSBL_CCDCMUX);
+}
+
+int vpss_select_ccdc_source(enum vpss_ccdc_source_sel src_sel)
+{
+	if (!oper_cfg.hw_ops.select_ccdc_source)
+		return -1;
+
+	dm355_select_ccdc_source(src_sel);
+	return 0;
+}
+EXPORT_SYMBOL(vpss_select_ccdc_source);
+
+static int dm644x_clear_wbl_overflow(enum vpss_wbl_sel wbl_sel)
+{
+	u32 mask = 1, val;
+
+	if (wbl_sel < VPSS_PCR_AEW_WBL_0 ||
+	    wbl_sel > VPSS_PCR_CCDC_WBL_O)
+		return -1;
+
+	/* writing a 0 clear the overflow */
+	mask = ~(mask << wbl_sel);
+	val = bl_regr(DM644X_SBL_PCR_VPSS) & mask;
+	bl_regw(val, DM644X_SBL_PCR_VPSS);
+	return 0;
+}
+
+int vpss_clear_wbl_overflow(enum vpss_wbl_sel wbl_sel)
+{
+	if (!oper_cfg.hw_ops.clear_wbl_overflow)
+		return -1;
+
+	return oper_cfg.hw_ops.clear_wbl_overflow(wbl_sel);
+}
+EXPORT_SYMBOL(vpss_clear_wbl_overflow);
+
+/*
+ *  dm355_enable_clock - Enable VPSS Clock
+ *  @clock_sel: CLock to be enabled/disabled
+ *  @en: enable/disable flag
+ *
+ *  This is called to enable or disable a vpss clock
+ */
+static int dm355_enable_clock(enum vpss_clock_sel clock_sel, int en)
+{
+	unsigned long flags;
+	u32 utemp, mask = 0x1, shift = 0;
+
+	switch (clock_sel) {
+	case VPSS_VPBE_CLOCK:
+		/* nothing since lsb */
+		break;
+	case VPSS_VENC_CLOCK_SEL:
+		shift = 2;
+		break;
+	case VPSS_CFALD_CLOCK:
+		shift = 3;
+		break;
+	case VPSS_H3A_CLOCK:
+		shift = 4;
+		break;
+	case VPSS_IPIPE_CLOCK:
+		shift = 5;
+		break;
+	case VPSS_CCDC_CLOCK:
+		shift = 6;
+		break;
+	default:
+		printk(KERN_ERR "dm355_enable_clock:"
+				" Invalid selector: %d\n", clock_sel);
+		return -1;
+	}
+
+	spin_lock_irqsave(&oper_cfg.vpss_lock, flags);
+	utemp = vpss_regr(DM355_VPSSCLK_CLKCTRL);
+	if (!en)
+		utemp &= ~(mask << shift);
+	else
+		utemp |= (mask << shift);
+
+	vpss_regw(utemp, DM355_VPSSCLK_CLKCTRL);
+	spin_unlock_irqrestore(&oper_cfg.vpss_lock, flags);
+	return 0;
+}
+
+int vpss_enable_clock(enum vpss_clock_sel clock_sel, int en)
+{
+	if (!oper_cfg.hw_ops.enable_clock)
+		return -1;
+
+	return oper_cfg.hw_ops.enable_clock(clock_sel, en);
+}
+EXPORT_SYMBOL(vpss_enable_clock);
+
+static int __init vpss_probe(struct platform_device *pdev)
+{
+	int status, dm355 = 0;
+
+	if (!pdev->dev.platform_data) {
+		dev_err(&pdev->dev, "no platform data\n");
+		return -ENOENT;
+	}
+	strcpy(oper_cfg.vpss_name, pdev->dev.platform_data);
+
+	if (!strcmp(oper_cfg.vpss_name, "dm355_vpss"))
+		dm355 = 1;
+	else if (strcmp(oper_cfg.vpss_name, "dm644x_vpss")) {
+		dev_err(&pdev->dev, "vpss driver not supported on"
+			" this platform\n");
+		return -ENODEV;
+	}
+
+	dev_info(&pdev->dev, "%s vpss probed\n", oper_cfg.vpss_name);
+	oper_cfg.r1 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!oper_cfg.r1)
+		return -ENOENT;
+
+	oper_cfg.len1 = oper_cfg.r1->end - oper_cfg.r1->start + 1;
+
+	oper_cfg.r1 = request_mem_region(oper_cfg.r1->start, oper_cfg.len1,
+					 oper_cfg.r1->name);
+	if (!oper_cfg.r1)
+		return -EBUSY;
+
+	oper_cfg.vpss_bl_regs_base = ioremap(oper_cfg.r1->start, oper_cfg.len1);
+	if (!oper_cfg.vpss_bl_regs_base) {
+		status = -EBUSY;
+		goto fail1;
+	}
+
+	if (dm355) {
+		oper_cfg.r2 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+		if (!oper_cfg.r2) {
+			status = -ENOENT;
+			goto fail2;
+		}
+		oper_cfg.len2 = oper_cfg.r2->end - oper_cfg.r2->start + 1;
+		oper_cfg.r2 = request_mem_region(oper_cfg.r2->start,
+						 oper_cfg.len2,
+						 oper_cfg.r2->name);
+		if (!oper_cfg.r2) {
+			status = -EBUSY;
+			goto fail2;
+		}
+
+		oper_cfg.vpss_regs_base = ioremap(oper_cfg.r2->start,
+						  oper_cfg.len2);
+		if (!oper_cfg.vpss_regs_base) {
+			status = -EBUSY;
+			goto fail3;
+		}
+	}
+
+	if (dm355) {
+		oper_cfg.hw_ops.enable_clock = dm355_enable_clock;
+		oper_cfg.hw_ops.select_ccdc_source = dm355_select_ccdc_source;
+	} else
+		oper_cfg.hw_ops.clear_wbl_overflow = dm644x_clear_wbl_overflow;
+
+	spin_lock_init(&oper_cfg.vpss_lock);
+	dev_info(&pdev->dev, "%s vpss probe success\n", oper_cfg.vpss_name);
+	return 0;
+
+fail3:
+	release_mem_region(oper_cfg.r2->start, oper_cfg.len2);
+fail2:
+	iounmap(oper_cfg.vpss_bl_regs_base);
+fail1:
+	release_mem_region(oper_cfg.r1->start, oper_cfg.len1);
+	return status;
+}
+
+static int vpss_remove(struct platform_device *pdev)
+{
+	iounmap(oper_cfg.vpss_bl_regs_base);
+	release_mem_region(oper_cfg.r1->start, oper_cfg.len1);
+	if (!strcmp(oper_cfg.vpss_name, "dm355_vpss")) {
+		iounmap(oper_cfg.vpss_regs_base);
+		release_mem_region(oper_cfg.r2->start, oper_cfg.len2);
+	}
+	return 0;
+}
+
+static struct platform_driver vpss_driver = {
+	.driver = {
+		.name	= "vpss",
+		.owner = THIS_MODULE,
+	},
+	.remove = __devexit_p(vpss_remove),
+	.probe = vpss_probe,
+};
+
+static void vpss_exit(void)
+{
+	platform_driver_unregister(&vpss_driver);
+}
+
+static int __init vpss_init(void)
+{
+	return platform_driver_register(&vpss_driver);
+}
+subsys_initcall(vpss_init);
+module_exit(vpss_exit);
-- 
cgit v1.2.3


From 210fa70d3aa25da78e7ca7a43d993cd2603c0540 Mon Sep 17 00:00:00 2001
From: Chaithrika U S <chaithrika@ti.com>
Date: Mon, 20 Jul 2009 05:03:10 -0300
Subject: V4L/DVB (12453a): DaVinci: DM646x: Update the structure name as per
 header file changes

In the platform header file, the subdev_info structure name has been changed
to vpif_subdev_info. Update this change in the driver too.

Applies to v4l-dvb repository.

Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/davinci/vpif_display.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/davinci/vpif_display.c b/drivers/media/video/davinci/vpif_display.c
index 969d4b3aa78..8ea65d794db 100644
--- a/drivers/media/video/davinci/vpif_display.c
+++ b/drivers/media/video/davinci/vpif_display.c
@@ -1422,7 +1422,7 @@ vpif_init_free_channel_objects:
  */
 static __init int vpif_probe(struct platform_device *pdev)
 {
-	const struct subdev_info *subdevdata;
+	const struct vpif_subdev_info *subdevdata;
 	int i, j = 0, k, q, m, err = 0;
 	struct i2c_adapter *i2c_adap;
 	struct vpif_config *config;
-- 
cgit v1.2.3


From 2639ead140aa7063188b6599a1a7398d60db2712 Mon Sep 17 00:00:00 2001
From: Muralidharan Karicheri <m-karicheri2@ti.com>
Date: Mon, 6 Jul 2009 15:08:31 -0300
Subject: V4L/DVB (12254): v4l: Makefile and config files for vpfe capture
 driver

This adds Makefile and Kconfig changes to build vpfe capture driver.

Reviewed by: Laurent Pinchart <laurent.pinchart@skynet.be>

Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/Kconfig          | 49 ++++++++++++++++++++++++++++++++++++
 drivers/media/video/Makefile         |  2 ++
 drivers/media/video/davinci/Makefile |  6 +++++
 3 files changed, 57 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index df20283151c..9b8f79afe19 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -527,6 +527,55 @@ config VIDEO_VIVI
 	  Say Y here if you want to test video apps or debug V4L devices.
 	  In doubt, say N.
 
+config VIDEO_VPSS_SYSTEM
+	tristate "VPSS System module driver"
+	depends on ARCH_DAVINCI
+	help
+	  Support for vpss system module for video driver
+	default y
+
+config VIDEO_VPFE_CAPTURE
+	tristate "VPFE Video Capture Driver"
+	depends on VIDEO_V4L2 && ARCH_DAVINCI
+	select VIDEOBUF_DMA_CONTIG
+	help
+	  Support for DMXXXX VPFE based frame grabber. This is the
+	  common V4L2 module for following DMXXX SoCs from Texas
+	  Instruments:- DM6446 & DM355.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called vpfe-capture.
+
+config VIDEO_DM6446_CCDC
+	tristate "DM6446 CCDC HW module"
+	depends on ARCH_DAVINCI_DM644x && VIDEO_VPFE_CAPTURE
+	select VIDEO_VPSS_SYSTEM
+	default y
+	help
+	   Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces
+	   with decoder modules such as TVP5146 over BT656 or
+	   sensor module such as MT9T001 over a raw interface. This
+	   module configures the interface and CCDC/ISIF to do
+	   video frame capture from slave decoders.
+
+	   To compile this driver as a module, choose M here: the
+	   module will be called vpfe.
+
+config VIDEO_DM355_CCDC
+	tristate "DM355 CCDC HW module"
+	depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE
+	select VIDEO_VPSS_SYSTEM
+	default y
+	help
+	   Enables DM355 CCD hw module. DM355 CCDC hw interfaces
+	   with decoder modules such as TVP5146 over BT656 or
+	   sensor module such as MT9T001 over a raw interface. This
+	   module configures the interface and CCDC/ISIF to do
+	   video frame capture from a slave decoders
+
+	   To compile this driver as a module, choose M here: the
+	   module will be called vpfe.
+
 source "drivers/media/video/bt8xx/Kconfig"
 
 config VIDEO_PMS
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 70804caa5f3..040bc049200 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -154,6 +154,8 @@ obj-$(CONFIG_VIDEO_MX3)			+= mx3_camera.o
 obj-$(CONFIG_VIDEO_PXA27x)		+= pxa_camera.o
 obj-$(CONFIG_VIDEO_SH_MOBILE_CEU)	+= sh_mobile_ceu_camera.o
 
+obj-$(CONFIG_ARCH_DAVINCI)		+= davinci/
+
 obj-$(CONFIG_VIDEO_AU0828) += au0828/
 
 obj-$(CONFIG_USB_VIDEO_CLASS)	+= uvc/
diff --git a/drivers/media/video/davinci/Makefile b/drivers/media/video/davinci/Makefile
index 7fe9bce9716..f44cad2f541 100644
--- a/drivers/media/video/davinci/Makefile
+++ b/drivers/media/video/davinci/Makefile
@@ -7,3 +7,9 @@ obj-$(CONFIG_VIDEO_DAVINCI_VPIF) += vpif.o
 
 #DM646x EVM Display driver
 obj-$(CONFIG_DISPLAY_DAVINCI_DM646X_EVM) += vpif_display.o
+
+# Capture: DM6446 and DM355
+obj-$(CONFIG_VIDEO_VPSS_SYSTEM) += vpss.o
+obj-$(CONFIG_VIDEO_VPFE_CAPTURE) += vpfe_capture.o
+obj-$(CONFIG_VIDEO_DM6446_CCDC) += dm644x_ccdc.o
+obj-$(CONFIG_VIDEO_DM355_CCDC) += dm355_ccdc.o
-- 
cgit v1.2.3


From c41debafc6e396a8e15f1f017aec7c0cf67e1b54 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 25 Aug 2009 11:06:21 -0300
Subject: V4L/DVB (12504): soc-camera: prepare soc_camera_platform.c and its
 users for conversion

soc_camera_platform.c is only used by y SuperH ap325rxa board. This patch
converts soc_camera_platform.c and its users for the soc-camera platform-
device conversion and also extends soc-camera core to handle non-I2C cameras.

Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/soc_camera.c | 61 ++++++++++++++++++++++++++++++----------
 1 file changed, 46 insertions(+), 15 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index 9f5ae816785..0340754e540 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -1165,45 +1165,76 @@ void soc_camera_video_stop(struct soc_camera_device *icd)
 }
 EXPORT_SYMBOL(soc_camera_video_stop);
 
-static int __devinit soc_camera_pdrv_probe(struct platform_device *pdev)
+#ifdef CONFIG_I2C_BOARDINFO
+static int soc_camera_init_i2c(struct platform_device *pdev,
+			       struct soc_camera_link *icl)
 {
-	struct soc_camera_link *icl = pdev->dev.platform_data;
-	struct i2c_adapter *adap;
 	struct i2c_client *client;
+	struct i2c_adapter *adap = i2c_get_adapter(icl->i2c_adapter_id);
+	int ret;
 
-	if (!icl)
-		return -EINVAL;
-
-	adap = i2c_get_adapter(icl->i2c_adapter_id);
 	if (!adap) {
-		dev_warn(&pdev->dev, "Cannot get adapter #%d. No driver?\n",
-			 icl->i2c_adapter_id);
-		/* -ENODEV and -ENXIO do not produce an error on probe()... */
-		return -ENOENT;
+		ret = -ENODEV;
+		dev_err(&pdev->dev, "Cannot get adapter #%d. No driver?\n",
+			icl->i2c_adapter_id);
+		goto ei2cga;
 	}
 
 	icl->board_info->platform_data = icl;
 	client = i2c_new_device(adap, icl->board_info);
 	if (!client) {
-		i2c_put_adapter(adap);
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto ei2cnd;
 	}
 
 	platform_set_drvdata(pdev, client);
 
 	return 0;
+ei2cnd:
+	i2c_put_adapter(adap);
+ei2cga:
+	return ret;
 }
 
-static int __devexit soc_camera_pdrv_remove(struct platform_device *pdev)
+static void soc_camera_free_i2c(struct platform_device *pdev)
 {
 	struct i2c_client *client = platform_get_drvdata(pdev);
 
 	if (!client)
-		return -ENODEV;
+		return;
 
 	i2c_unregister_device(client);
 	i2c_put_adapter(client->adapter);
+}
+#else
+#define soc_camera_init_i2c(d, icl)	(-ENODEV)
+#define soc_camera_free_i2c(d)		do {} while (0)
+#endif
 
+static int __devinit soc_camera_pdrv_probe(struct platform_device *pdev)
+{
+	struct soc_camera_link *icl = pdev->dev.platform_data;
+
+	if (!icl)
+		return -EINVAL;
+
+	if (icl->board_info)
+		return soc_camera_init_i2c(pdev, icl);
+	else if (!icl->add_device || !icl->del_device)
+		return -EINVAL;
+
+	/* &pdev->dev will become &icd->dev */
+	return icl->add_device(icl, &pdev->dev);
+}
+
+static int __devexit soc_camera_pdrv_remove(struct platform_device *pdev)
+{
+	struct soc_camera_link *icl = pdev->dev.platform_data;
+
+	if (icl->board_info)
+		soc_camera_free_i2c(pdev);
+	else
+		icl->del_device(icl);
 	return 0;
 }
 
-- 
cgit v1.2.3


From 40e2e0927003424c25807b575dd40da2b8685857 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 25 Aug 2009 11:28:22 -0300
Subject: V4L/DVB (12506): soc-camera: convert to platform device

Convert soc-camera core and all drivers to platform device API. We already
converted platforms to register a platform device for each soc-camera client,
now we remove the compatibility code and switch completely to the new scheme.
This is a preparatory step for the v4l2-subdev conversion.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/mt9m001.c              | 114 ++++----
 drivers/media/video/mt9m111.c              | 154 ++++++-----
 drivers/media/video/mt9t031.c              | 116 ++++----
 drivers/media/video/mt9v022.c              | 119 ++++----
 drivers/media/video/mx3_camera.c           |  27 +-
 drivers/media/video/ov772x.c               | 157 ++++++-----
 drivers/media/video/pxa_camera.c           |  29 +-
 drivers/media/video/sh_mobile_ceu_camera.c |  13 +-
 drivers/media/video/soc_camera.c           | 431 ++++++++++++++---------------
 drivers/media/video/soc_camera_platform.c  |  76 ++---
 drivers/media/video/tw9910.c               | 110 ++++----
 11 files changed, 682 insertions(+), 664 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/mt9m001.c b/drivers/media/video/mt9m001.c
index 4d794b42d6c..1e4f269fc08 100644
--- a/drivers/media/video/mt9m001.c
+++ b/drivers/media/video/mt9m001.c
@@ -69,8 +69,6 @@ static const struct soc_camera_data_format mt9m001_monochrome_formats[] = {
 };
 
 struct mt9m001 {
-	struct i2c_client *client;
-	struct soc_camera_device icd;
 	int model;	/* V4L2_IDENT_MT9M001* codes from v4l2-chip-ident.h */
 	unsigned char autoexposure;
 };
@@ -111,11 +109,11 @@ static int reg_clear(struct i2c_client *client, const u8 reg,
 
 static int mt9m001_init(struct soc_camera_device *icd)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
-	struct soc_camera_link *icl = client->dev.platform_data;
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
 	int ret;
 
-	dev_dbg(icd->vdev->parent, "%s\n", __func__);
+	dev_dbg(&icd->dev, "%s\n", __func__);
 
 	if (icl->power) {
 		ret = icl->power(&client->dev, 1);
@@ -147,8 +145,8 @@ static int mt9m001_init(struct soc_camera_device *icd)
 
 static int mt9m001_release(struct soc_camera_device *icd)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
-	struct soc_camera_link *icl = client->dev.platform_data;
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
 
 	/* Disable the chip */
 	reg_write(client, MT9M001_OUTPUT_CONTROL, 0);
@@ -161,7 +159,7 @@ static int mt9m001_release(struct soc_camera_device *icd)
 
 static int mt9m001_start_capture(struct soc_camera_device *icd)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 
 	/* Switch to master "normal" mode */
 	if (reg_write(client, MT9M001_OUTPUT_CONTROL, 2) < 0)
@@ -171,7 +169,7 @@ static int mt9m001_start_capture(struct soc_camera_device *icd)
 
 static int mt9m001_stop_capture(struct soc_camera_device *icd)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 
 	/* Stop sensor readout */
 	if (reg_write(client, MT9M001_OUTPUT_CONTROL, 0) < 0)
@@ -182,8 +180,7 @@ static int mt9m001_stop_capture(struct soc_camera_device *icd)
 static int mt9m001_set_bus_param(struct soc_camera_device *icd,
 				 unsigned long flags)
 {
-	struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd);
-	struct soc_camera_link *icl = mt9m001->client->dev.platform_data;
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
 	unsigned long width_flag = flags & SOCAM_DATAWIDTH_MASK;
 
 	/* Only one width bit may be set */
@@ -205,8 +202,7 @@ static int mt9m001_set_bus_param(struct soc_camera_device *icd,
 
 static unsigned long mt9m001_query_bus_param(struct soc_camera_device *icd)
 {
-	struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd);
-	struct soc_camera_link *icl = mt9m001->client->dev.platform_data;
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
 	/* MT9M001 has all capture_format parameters fixed */
 	unsigned long flags = SOCAM_PCLK_SAMPLE_FALLING |
 		SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH |
@@ -223,8 +219,8 @@ static unsigned long mt9m001_query_bus_param(struct soc_camera_device *icd)
 static int mt9m001_set_crop(struct soc_camera_device *icd,
 			    struct v4l2_rect *rect)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
-	struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct mt9m001 *mt9m001 = i2c_get_clientdata(client);
 	int ret;
 	const u16 hblank = 9, vblank = 25;
 
@@ -290,12 +286,13 @@ static int mt9m001_try_fmt(struct soc_camera_device *icd,
 static int mt9m001_get_chip_id(struct soc_camera_device *icd,
 			       struct v4l2_dbg_chip_ident *id)
 {
-	struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct mt9m001 *mt9m001 = i2c_get_clientdata(client);
 
 	if (id->match.type != V4L2_CHIP_MATCH_I2C_ADDR)
 		return -EINVAL;
 
-	if (id->match.addr != mt9m001->client->addr)
+	if (id->match.addr != client->addr)
 		return -ENODEV;
 
 	id->ident	= mt9m001->model;
@@ -308,7 +305,7 @@ static int mt9m001_get_chip_id(struct soc_camera_device *icd,
 static int mt9m001_get_register(struct soc_camera_device *icd,
 				struct v4l2_dbg_register *reg)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 
 	if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff)
 		return -EINVAL;
@@ -328,7 +325,7 @@ static int mt9m001_get_register(struct soc_camera_device *icd,
 static int mt9m001_set_register(struct soc_camera_device *icd,
 				struct v4l2_dbg_register *reg)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 
 	if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff)
 		return -EINVAL;
@@ -381,15 +378,11 @@ static const struct v4l2_queryctrl mt9m001_controls[] = {
 	}
 };
 
-static int mt9m001_video_probe(struct soc_camera_device *);
-static void mt9m001_video_remove(struct soc_camera_device *);
 static int mt9m001_get_control(struct soc_camera_device *, struct v4l2_control *);
 static int mt9m001_set_control(struct soc_camera_device *, struct v4l2_control *);
 
 static struct soc_camera_ops mt9m001_ops = {
 	.owner			= THIS_MODULE,
-	.probe			= mt9m001_video_probe,
-	.remove			= mt9m001_video_remove,
 	.init			= mt9m001_init,
 	.release		= mt9m001_release,
 	.start_capture		= mt9m001_start_capture,
@@ -412,8 +405,8 @@ static struct soc_camera_ops mt9m001_ops = {
 
 static int mt9m001_get_control(struct soc_camera_device *icd, struct v4l2_control *ctrl)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
-	struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct mt9m001 *mt9m001 = i2c_get_clientdata(client);
 	int data;
 
 	switch (ctrl->id) {
@@ -432,8 +425,8 @@ static int mt9m001_get_control(struct soc_camera_device *icd, struct v4l2_contro
 
 static int mt9m001_set_control(struct soc_camera_device *icd, struct v4l2_control *ctrl)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
-	struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct mt9m001 *mt9m001 = i2c_get_clientdata(client);
 	const struct v4l2_queryctrl *qctrl;
 	int data;
 
@@ -525,11 +518,11 @@ static int mt9m001_set_control(struct soc_camera_device *icd, struct v4l2_contro
 
 /* Interface active, can use i2c. If it fails, it can indeed mean, that
  * this wasn't our capture interface, so, we wait for the right one */
-static int mt9m001_video_probe(struct soc_camera_device *icd)
+static int mt9m001_video_probe(struct soc_camera_device *icd,
+			       struct i2c_client *client)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
-	struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd);
-	struct soc_camera_link *icl = client->dev.platform_data;
+	struct mt9m001 *mt9m001 = i2c_get_clientdata(client);
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
 	s32 data;
 	int ret;
 	unsigned long flags;
@@ -540,6 +533,11 @@ static int mt9m001_video_probe(struct soc_camera_device *icd)
 	    to_soc_camera_host(icd->dev.parent)->nr != icd->iface)
 		return -ENODEV;
 
+	/* Switch master clock on */
+	ret = soc_camera_video_start(icd, &client->dev);
+	if (ret)
+		return ret;
+
 	/* Enable the chip */
 	data = reg_write(client, MT9M001_CHIP_ENABLE, 1);
 	dev_dbg(&icd->dev, "write: %d\n", data);
@@ -547,6 +545,8 @@ static int mt9m001_video_probe(struct soc_camera_device *icd)
 	/* Read out the chip version register */
 	data = reg_read(client, MT9M001_CHIP_VERSION);
 
+	soc_camera_video_stop(icd);
+
 	/* must be 0x8411 or 0x8421 for colour sensor and 8431 for bw */
 	switch (data) {
 	case 0x8411:
@@ -559,10 +559,9 @@ static int mt9m001_video_probe(struct soc_camera_device *icd)
 		icd->formats = mt9m001_monochrome_formats;
 		break;
 	default:
-		ret = -ENODEV;
 		dev_err(&icd->dev,
 			"No MT9M001 chip detected, register read %x\n", data);
-		goto ei2c;
+		return -ENODEV;
 	}
 
 	icd->num_formats = 0;
@@ -588,26 +587,16 @@ static int mt9m001_video_probe(struct soc_camera_device *icd)
 	dev_info(&icd->dev, "Detected a MT9M001 chip ID %x (%s)\n", data,
 		 data == 0x8431 ? "C12STM" : "C12ST");
 
-	/* Now that we know the model, we can start video */
-	ret = soc_camera_video_start(icd);
-	if (ret)
-		goto eisis;
-
 	return 0;
-
-eisis:
-ei2c:
-	return ret;
 }
 
 static void mt9m001_video_remove(struct soc_camera_device *icd)
 {
-	struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd);
-	struct soc_camera_link *icl = mt9m001->client->dev.platform_data;
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
 
-	dev_dbg(&icd->dev, "Video %x removed: %p, %p\n", mt9m001->client->addr,
+	dev_dbg(&icd->dev, "Video %x removed: %p, %p\n", client->addr,
 		icd->dev.parent, icd->vdev);
-	soc_camera_video_stop(icd);
 	if (icl->free_bus)
 		icl->free_bus(icl);
 }
@@ -616,11 +605,17 @@ static int mt9m001_probe(struct i2c_client *client,
 			 const struct i2c_device_id *did)
 {
 	struct mt9m001 *mt9m001;
-	struct soc_camera_device *icd;
+	struct soc_camera_device *icd = client->dev.platform_data;
 	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
-	struct soc_camera_link *icl = client->dev.platform_data;
+	struct soc_camera_link *icl;
 	int ret;
 
+	if (!icd) {
+		dev_err(&client->dev, "MT9M001: missing soc-camera data!\n");
+		return -EINVAL;
+	}
+
+	icl = to_soc_camera_link(icd);
 	if (!icl) {
 		dev_err(&client->dev, "MT9M001 driver needs platform data\n");
 		return -EINVAL;
@@ -636,13 +631,10 @@ static int mt9m001_probe(struct i2c_client *client,
 	if (!mt9m001)
 		return -ENOMEM;
 
-	mt9m001->client = client;
 	i2c_set_clientdata(client, mt9m001);
 
 	/* Second stage probe - when a capture adapter is there */
-	icd = &mt9m001->icd;
 	icd->ops	= &mt9m001_ops;
-	icd->control	= &client->dev;
 	icd->x_min	= 20;
 	icd->y_min	= 12;
 	icd->x_current	= 20;
@@ -652,27 +644,29 @@ static int mt9m001_probe(struct i2c_client *client,
 	icd->height_min	= 32;
 	icd->height_max	= 1024;
 	icd->y_skip_top	= 1;
-	icd->iface	= icl->bus_id;
 	/* Simulated autoexposure. If enabled, we calculate shutter width
 	 * ourselves in the driver based on vertical blanking and frame width */
 	mt9m001->autoexposure = 1;
 
-	ret = soc_camera_device_register(icd);
-	if (ret)
-		goto eisdr;
-
-	return 0;
+	ret = mt9m001_video_probe(icd, client);
+	if (ret) {
+		icd->ops = NULL;
+		i2c_set_clientdata(client, NULL);
+		kfree(mt9m001);
+	}
 
-eisdr:
-	kfree(mt9m001);
 	return ret;
 }
 
 static int mt9m001_remove(struct i2c_client *client)
 {
 	struct mt9m001 *mt9m001 = i2c_get_clientdata(client);
+	struct soc_camera_device *icd = client->dev.platform_data;
 
-	soc_camera_device_unregister(&mt9m001->icd);
+	icd->ops = NULL;
+	mt9m001_video_remove(icd);
+	i2c_set_clientdata(client, NULL);
+	client->driver = NULL;
 	kfree(mt9m001);
 
 	return 0;
diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c
index fc5e2de0376..95c2f089605 100644
--- a/drivers/media/video/mt9m111.c
+++ b/drivers/media/video/mt9m111.c
@@ -148,8 +148,6 @@ enum mt9m111_context {
 };
 
 struct mt9m111 {
-	struct i2c_client *client;
-	struct soc_camera_device icd;
 	int model;	/* V4L2_IDENT_MT9M11x* codes from v4l2-chip-ident.h */
 	enum mt9m111_context context;
 	struct v4l2_rect rect;
@@ -203,7 +201,7 @@ static int mt9m111_reg_write(struct i2c_client *client, const u16 reg,
 
 	ret = reg_page_map_set(client, reg);
 	if (!ret)
-		ret = i2c_smbus_write_word_data(client, (reg & 0xff),
+		ret = i2c_smbus_write_word_data(client, reg & 0xff,
 						swab16(data));
 	dev_dbg(&client->dev, "write reg.%03x = %04x -> %d\n", reg, data, ret);
 	return ret;
@@ -232,7 +230,7 @@ static int mt9m111_reg_clear(struct i2c_client *client, const u16 reg,
 static int mt9m111_set_context(struct soc_camera_device *icd,
 			       enum mt9m111_context ctxt)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 	int valB = MT9M111_CTXT_CTRL_RESTART | MT9M111_CTXT_CTRL_DEFECTCOR_B
 		| MT9M111_CTXT_CTRL_RESIZE_B | MT9M111_CTXT_CTRL_CTRL2_B
 		| MT9M111_CTXT_CTRL_GAMMA_B | MT9M111_CTXT_CTRL_READ_MODE_B
@@ -249,8 +247,8 @@ static int mt9m111_set_context(struct soc_camera_device *icd,
 static int mt9m111_setup_rect(struct soc_camera_device *icd,
 			      struct v4l2_rect *rect)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
-	struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct mt9m111 *mt9m111 = i2c_get_clientdata(client);
 	int ret, is_raw_format;
 	int width = rect->width;
 	int height = rect->height;
@@ -294,7 +292,7 @@ static int mt9m111_setup_rect(struct soc_camera_device *icd,
 
 static int mt9m111_setup_pixfmt(struct soc_camera_device *icd, u16 outfmt)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 	int ret;
 
 	ret = reg_write(OUTPUT_FORMAT_CTRL2_A, outfmt);
@@ -315,7 +313,8 @@ static int mt9m111_setfmt_bayer10(struct soc_camera_device *icd)
 
 static int mt9m111_setfmt_rgb565(struct soc_camera_device *icd)
 {
-	struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct mt9m111 *mt9m111 = i2c_get_clientdata(client);
 	int val = 0;
 
 	if (mt9m111->swap_rgb_red_blue)
@@ -329,7 +328,8 @@ static int mt9m111_setfmt_rgb565(struct soc_camera_device *icd)
 
 static int mt9m111_setfmt_rgb555(struct soc_camera_device *icd)
 {
-	struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct mt9m111 *mt9m111 = i2c_get_clientdata(client);
 	int val = 0;
 
 	if (mt9m111->swap_rgb_red_blue)
@@ -343,7 +343,8 @@ static int mt9m111_setfmt_rgb555(struct soc_camera_device *icd)
 
 static int mt9m111_setfmt_yuv(struct soc_camera_device *icd)
 {
-	struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct mt9m111 *mt9m111 = i2c_get_clientdata(client);
 	int val = 0;
 
 	if (mt9m111->swap_yuv_cb_cr)
@@ -356,9 +357,9 @@ static int mt9m111_setfmt_yuv(struct soc_camera_device *icd)
 
 static int mt9m111_enable(struct soc_camera_device *icd)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
-	struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd);
-	struct soc_camera_link *icl = client->dev.platform_data;
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
+	struct mt9m111 *mt9m111 = i2c_get_clientdata(client);
 	int ret;
 
 	if (icl->power) {
@@ -378,9 +379,9 @@ static int mt9m111_enable(struct soc_camera_device *icd)
 
 static int mt9m111_disable(struct soc_camera_device *icd)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
-	struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd);
-	struct soc_camera_link *icl = client->dev.platform_data;
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
+	struct mt9m111 *mt9m111 = i2c_get_clientdata(client);
 	int ret;
 
 	ret = reg_clear(RESET, MT9M111_RESET_CHIP_ENABLE);
@@ -395,8 +396,8 @@ static int mt9m111_disable(struct soc_camera_device *icd)
 
 static int mt9m111_reset(struct soc_camera_device *icd)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
-	struct soc_camera_link *icl = client->dev.platform_data;
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
 	int ret;
 
 	ret = reg_set(RESET, MT9M111_RESET_RESET_MODE);
@@ -424,8 +425,7 @@ static int mt9m111_stop_capture(struct soc_camera_device *icd)
 
 static unsigned long mt9m111_query_bus_param(struct soc_camera_device *icd)
 {
-	struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd);
-	struct soc_camera_link *icl = mt9m111->client->dev.platform_data;
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
 	unsigned long flags = SOCAM_MASTER | SOCAM_PCLK_SAMPLE_RISING |
 		SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH |
 		SOCAM_DATA_ACTIVE_HIGH | SOCAM_DATAWIDTH_8;
@@ -441,7 +441,8 @@ static int mt9m111_set_bus_param(struct soc_camera_device *icd, unsigned long f)
 static int mt9m111_set_crop(struct soc_camera_device *icd,
 			    struct v4l2_rect *rect)
 {
-	struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct mt9m111 *mt9m111 = i2c_get_clientdata(client);
 	int ret;
 
 	dev_dbg(&icd->dev, "%s left=%d, top=%d, width=%d, height=%d\n",
@@ -456,7 +457,8 @@ static int mt9m111_set_crop(struct soc_camera_device *icd,
 
 static int mt9m111_set_pixfmt(struct soc_camera_device *icd, u32 pixfmt)
 {
-	struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct mt9m111 *mt9m111 = i2c_get_clientdata(client);
 	int ret;
 
 	switch (pixfmt) {
@@ -506,7 +508,8 @@ static int mt9m111_set_pixfmt(struct soc_camera_device *icd, u32 pixfmt)
 static int mt9m111_set_fmt(struct soc_camera_device *icd,
 			   struct v4l2_format *f)
 {
-	struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct mt9m111 *mt9m111 = i2c_get_clientdata(client);
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 	struct v4l2_rect rect = {
 		.left	= mt9m111->rect.left,
@@ -544,12 +547,13 @@ static int mt9m111_try_fmt(struct soc_camera_device *icd,
 static int mt9m111_get_chip_id(struct soc_camera_device *icd,
 			       struct v4l2_dbg_chip_ident *id)
 {
-	struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct mt9m111 *mt9m111 = i2c_get_clientdata(client);
 
 	if (id->match.type != V4L2_CHIP_MATCH_I2C_ADDR)
 		return -EINVAL;
 
-	if (id->match.addr != mt9m111->client->addr)
+	if (id->match.addr != client->addr)
 		return -ENODEV;
 
 	id->ident	= mt9m111->model;
@@ -562,8 +566,8 @@ static int mt9m111_get_chip_id(struct soc_camera_device *icd,
 static int mt9m111_get_register(struct soc_camera_device *icd,
 				struct v4l2_dbg_register *reg)
 {
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 	int val;
-	struct i2c_client *client = to_i2c_client(icd->control);
 
 	if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0x2ff)
 		return -EINVAL;
@@ -583,7 +587,7 @@ static int mt9m111_get_register(struct soc_camera_device *icd,
 static int mt9m111_set_register(struct soc_camera_device *icd,
 				struct v4l2_dbg_register *reg)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 
 	if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0x2ff)
 		return -EINVAL;
@@ -635,8 +639,6 @@ static const struct v4l2_queryctrl mt9m111_controls[] = {
 	}
 };
 
-static int mt9m111_video_probe(struct soc_camera_device *);
-static void mt9m111_video_remove(struct soc_camera_device *);
 static int mt9m111_get_control(struct soc_camera_device *,
 			       struct v4l2_control *);
 static int mt9m111_set_control(struct soc_camera_device *,
@@ -647,8 +649,6 @@ static int mt9m111_release(struct soc_camera_device *icd);
 
 static struct soc_camera_ops mt9m111_ops = {
 	.owner			= THIS_MODULE,
-	.probe			= mt9m111_video_probe,
-	.remove			= mt9m111_video_remove,
 	.init			= mt9m111_init,
 	.resume			= mt9m111_resume,
 	.release		= mt9m111_release,
@@ -672,8 +672,8 @@ static struct soc_camera_ops mt9m111_ops = {
 
 static int mt9m111_set_flip(struct soc_camera_device *icd, int flip, int mask)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
-	struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct mt9m111 *mt9m111 = i2c_get_clientdata(client);
 	int ret;
 
 	if (mt9m111->context == HIGHPOWER) {
@@ -693,7 +693,7 @@ static int mt9m111_set_flip(struct soc_camera_device *icd, int flip, int mask)
 
 static int mt9m111_get_global_gain(struct soc_camera_device *icd)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 	int data;
 
 	data = reg_read(GLOBAL_GAIN);
@@ -705,7 +705,7 @@ static int mt9m111_get_global_gain(struct soc_camera_device *icd)
 
 static int mt9m111_set_global_gain(struct soc_camera_device *icd, int gain)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 	u16 val;
 
 	if (gain > 63 * 2 * 2)
@@ -724,8 +724,8 @@ static int mt9m111_set_global_gain(struct soc_camera_device *icd, int gain)
 
 static int mt9m111_set_autoexposure(struct soc_camera_device *icd, int on)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
-	struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct mt9m111 *mt9m111 = i2c_get_clientdata(client);
 	int ret;
 
 	if (on)
@@ -741,8 +741,8 @@ static int mt9m111_set_autoexposure(struct soc_camera_device *icd, int on)
 
 static int mt9m111_set_autowhitebalance(struct soc_camera_device *icd, int on)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
-	struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct mt9m111 *mt9m111 = i2c_get_clientdata(client);
 	int ret;
 
 	if (on)
@@ -759,8 +759,8 @@ static int mt9m111_set_autowhitebalance(struct soc_camera_device *icd, int on)
 static int mt9m111_get_control(struct soc_camera_device *icd,
 			       struct v4l2_control *ctrl)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
-	struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct mt9m111 *mt9m111 = i2c_get_clientdata(client);
 	int data;
 
 	switch (ctrl->id) {
@@ -803,7 +803,8 @@ static int mt9m111_get_control(struct soc_camera_device *icd,
 static int mt9m111_set_control(struct soc_camera_device *icd,
 			       struct v4l2_control *ctrl)
 {
-	struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct mt9m111 *mt9m111 = i2c_get_clientdata(client);
 	const struct v4l2_queryctrl *qctrl;
 	int ret;
 
@@ -841,7 +842,8 @@ static int mt9m111_set_control(struct soc_camera_device *icd,
 
 static int mt9m111_restore_state(struct soc_camera_device *icd)
 {
-	struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct mt9m111 *mt9m111 = i2c_get_clientdata(client);
 
 	mt9m111_set_context(icd, mt9m111->context);
 	mt9m111_set_pixfmt(icd, mt9m111->pixfmt);
@@ -856,7 +858,8 @@ static int mt9m111_restore_state(struct soc_camera_device *icd)
 
 static int mt9m111_resume(struct soc_camera_device *icd)
 {
-	struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct mt9m111 *mt9m111 = i2c_get_clientdata(client);
 	int ret = 0;
 
 	if (mt9m111->powered) {
@@ -871,7 +874,8 @@ static int mt9m111_resume(struct soc_camera_device *icd)
 
 static int mt9m111_init(struct soc_camera_device *icd)
 {
-	struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct mt9m111 *mt9m111 = i2c_get_clientdata(client);
 	int ret;
 
 	mt9m111->context = HIGHPOWER;
@@ -902,10 +906,10 @@ static int mt9m111_release(struct soc_camera_device *icd)
  * Interface active, can use i2c. If it fails, it can indeed mean, that
  * this wasn't our capture interface, so, we wait for the right one
  */
-static int mt9m111_video_probe(struct soc_camera_device *icd)
+static int mt9m111_video_probe(struct soc_camera_device *icd,
+			       struct i2c_client *client)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
-	struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd);
+	struct mt9m111 *mt9m111 = i2c_get_clientdata(client);
 	s32 data;
 	int ret;
 
@@ -917,6 +921,11 @@ static int mt9m111_video_probe(struct soc_camera_device *icd)
 	    to_soc_camera_host(icd->dev.parent)->nr != icd->iface)
 		return -ENODEV;
 
+	/* Switch master clock on */
+	ret = soc_camera_video_start(icd, &client->dev);
+	if (ret)
+		goto evstart;
+
 	ret = mt9m111_enable(icd);
 	if (ret)
 		goto ei2c;
@@ -945,40 +954,33 @@ static int mt9m111_video_probe(struct soc_camera_device *icd)
 
 	dev_info(&icd->dev, "Detected a MT9M11x chip ID %x\n", data);
 
-	ret = soc_camera_video_start(icd);
-	if (ret)
-		goto eisis;
-
 	mt9m111->autoexposure = 1;
 	mt9m111->autowhitebalance = 1;
 
 	mt9m111->swap_rgb_even_odd = 1;
 	mt9m111->swap_rgb_red_blue = 1;
 
-	return 0;
-eisis:
 ei2c:
+	soc_camera_video_stop(icd);
+evstart:
 	return ret;
 }
 
-static void mt9m111_video_remove(struct soc_camera_device *icd)
-{
-	struct mt9m111 *mt9m111 = container_of(icd, struct mt9m111, icd);
-
-	dev_dbg(&icd->dev, "Video %x removed: %p, %p\n", mt9m111->client->addr,
-		mt9m111->icd.dev.parent, mt9m111->icd.vdev);
-	soc_camera_video_stop(&mt9m111->icd);
-}
-
 static int mt9m111_probe(struct i2c_client *client,
 			 const struct i2c_device_id *did)
 {
 	struct mt9m111 *mt9m111;
-	struct soc_camera_device *icd;
+	struct soc_camera_device *icd = client->dev.platform_data;
 	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
-	struct soc_camera_link *icl = client->dev.platform_data;
+	struct soc_camera_link *icl;
 	int ret;
 
+	if (!icd) {
+		dev_err(&client->dev, "MT9M11x: missing soc-camera data!\n");
+		return -EINVAL;
+	}
+
+	icl = to_soc_camera_link(icd);
 	if (!icl) {
 		dev_err(&client->dev, "MT9M11x driver needs platform data\n");
 		return -EINVAL;
@@ -994,13 +996,10 @@ static int mt9m111_probe(struct i2c_client *client,
 	if (!mt9m111)
 		return -ENOMEM;
 
-	mt9m111->client = client;
 	i2c_set_clientdata(client, mt9m111);
 
 	/* Second stage probe - when a capture adapter is there */
-	icd 		= &mt9m111->icd;
 	icd->ops	= &mt9m111_ops;
-	icd->control	= &client->dev;
 	icd->x_min	= MT9M111_MIN_DARK_COLS;
 	icd->y_min	= MT9M111_MIN_DARK_ROWS;
 	icd->x_current	= icd->x_min;
@@ -1010,22 +1009,25 @@ static int mt9m111_probe(struct i2c_client *client,
 	icd->height_min	= MT9M111_MIN_DARK_COLS;
 	icd->height_max	= MT9M111_MAX_HEIGHT;
 	icd->y_skip_top	= 0;
-	icd->iface	= icl->bus_id;
 
-	ret = soc_camera_device_register(icd);
-	if (ret)
-		goto eisdr;
-	return 0;
+	ret = mt9m111_video_probe(icd, client);
+	if (ret) {
+		icd->ops = NULL;
+		i2c_set_clientdata(client, NULL);
+		kfree(mt9m111);
+	}
 
-eisdr:
-	kfree(mt9m111);
 	return ret;
 }
 
 static int mt9m111_remove(struct i2c_client *client)
 {
 	struct mt9m111 *mt9m111 = i2c_get_clientdata(client);
-	soc_camera_device_unregister(&mt9m111->icd);
+	struct soc_camera_device *icd = client->dev.platform_data;
+
+	icd->ops = NULL;
+	i2c_set_clientdata(client, NULL);
+	client->driver = NULL;
 	kfree(mt9m111);
 
 	return 0;
diff --git a/drivers/media/video/mt9t031.c b/drivers/media/video/mt9t031.c
index 4207fb34267..d9c7c2fd698 100644
--- a/drivers/media/video/mt9t031.c
+++ b/drivers/media/video/mt9t031.c
@@ -68,8 +68,6 @@ static const struct soc_camera_data_format mt9t031_colour_formats[] = {
 };
 
 struct mt9t031 {
-	struct i2c_client *client;
-	struct soc_camera_device icd;
 	int model;	/* V4L2_IDENT_MT9T031* codes from v4l2-chip-ident.h */
 	unsigned char autoexposure;
 	u16 xskip;
@@ -138,8 +136,8 @@ static int get_shutter(struct i2c_client *client, u32 *data)
 
 static int mt9t031_init(struct soc_camera_device *icd)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
-	struct soc_camera_link *icl = client->dev.platform_data;
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
 	int ret;
 
 	if (icl->power) {
@@ -166,8 +164,8 @@ static int mt9t031_init(struct soc_camera_device *icd)
 
 static int mt9t031_release(struct soc_camera_device *icd)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
-	struct soc_camera_link *icl = client->dev.platform_data;
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
 
 	/* Disable the chip */
 	reg_clear(client, MT9T031_OUTPUT_CONTROL, 2);
@@ -180,7 +178,7 @@ static int mt9t031_release(struct soc_camera_device *icd)
 
 static int mt9t031_start_capture(struct soc_camera_device *icd)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 
 	/* Switch to master "normal" mode */
 	if (reg_set(client, MT9T031_OUTPUT_CONTROL, 2) < 0)
@@ -190,7 +188,7 @@ static int mt9t031_start_capture(struct soc_camera_device *icd)
 
 static int mt9t031_stop_capture(struct soc_camera_device *icd)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 
 	/* Stop sensor readout */
 	if (reg_clear(client, MT9T031_OUTPUT_CONTROL, 2) < 0)
@@ -201,7 +199,7 @@ static int mt9t031_stop_capture(struct soc_camera_device *icd)
 static int mt9t031_set_bus_param(struct soc_camera_device *icd,
 				 unsigned long flags)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 
 	/* The caller should have queried our parameters, check anyway */
 	if (flags & ~MT9T031_BUS_PARAM)
@@ -217,8 +215,7 @@ static int mt9t031_set_bus_param(struct soc_camera_device *icd,
 
 static unsigned long mt9t031_query_bus_param(struct soc_camera_device *icd)
 {
-	struct mt9t031 *mt9t031 = container_of(icd, struct mt9t031, icd);
-	struct soc_camera_link *icl = mt9t031->client->dev.platform_data;
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
 
 	return soc_camera_apply_sensor_flags(icl, MT9T031_BUS_PARAM);
 }
@@ -238,8 +235,8 @@ static void recalculate_limits(struct soc_camera_device *icd,
 static int mt9t031_set_params(struct soc_camera_device *icd,
 			      struct v4l2_rect *rect, u16 xskip, u16 yskip)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
-	struct mt9t031 *mt9t031 = container_of(icd, struct mt9t031, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct mt9t031 *mt9t031 = i2c_get_clientdata(client);
 	int ret;
 	u16 xbin, ybin, width, height, left, top;
 	const u16 hblank = MT9T031_HORIZONTAL_BLANK,
@@ -336,7 +333,8 @@ static int mt9t031_set_params(struct soc_camera_device *icd,
 static int mt9t031_set_crop(struct soc_camera_device *icd,
 			    struct v4l2_rect *rect)
 {
-	struct mt9t031 *mt9t031 = container_of(icd, struct mt9t031, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct mt9t031 *mt9t031 = i2c_get_clientdata(client);
 
 	/* CROP - no change in scaling, or in limits */
 	return mt9t031_set_params(icd, rect, mt9t031->xskip, mt9t031->yskip);
@@ -345,7 +343,8 @@ static int mt9t031_set_crop(struct soc_camera_device *icd,
 static int mt9t031_set_fmt(struct soc_camera_device *icd,
 			   struct v4l2_format *f)
 {
-	struct mt9t031 *mt9t031 = container_of(icd, struct mt9t031, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct mt9t031 *mt9t031 = i2c_get_clientdata(client);
 	int ret;
 	u16 xskip, yskip;
 	struct v4l2_rect rect = {
@@ -395,12 +394,13 @@ static int mt9t031_try_fmt(struct soc_camera_device *icd,
 static int mt9t031_get_chip_id(struct soc_camera_device *icd,
 			       struct v4l2_dbg_chip_ident *id)
 {
-	struct mt9t031 *mt9t031 = container_of(icd, struct mt9t031, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct mt9t031 *mt9t031 = i2c_get_clientdata(client);
 
 	if (id->match.type != V4L2_CHIP_MATCH_I2C_ADDR)
 		return -EINVAL;
 
-	if (id->match.addr != mt9t031->client->addr)
+	if (id->match.addr != client->addr)
 		return -ENODEV;
 
 	id->ident	= mt9t031->model;
@@ -413,7 +413,7 @@ static int mt9t031_get_chip_id(struct soc_camera_device *icd,
 static int mt9t031_get_register(struct soc_camera_device *icd,
 				struct v4l2_dbg_register *reg)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 
 	if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff)
 		return -EINVAL;
@@ -432,7 +432,7 @@ static int mt9t031_get_register(struct soc_camera_device *icd,
 static int mt9t031_set_register(struct soc_camera_device *icd,
 				struct v4l2_dbg_register *reg)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 
 	if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff)
 		return -EINVAL;
@@ -493,15 +493,11 @@ static const struct v4l2_queryctrl mt9t031_controls[] = {
 	}
 };
 
-static int mt9t031_video_probe(struct soc_camera_device *);
-static void mt9t031_video_remove(struct soc_camera_device *);
 static int mt9t031_get_control(struct soc_camera_device *, struct v4l2_control *);
 static int mt9t031_set_control(struct soc_camera_device *, struct v4l2_control *);
 
 static struct soc_camera_ops mt9t031_ops = {
 	.owner			= THIS_MODULE,
-	.probe			= mt9t031_video_probe,
-	.remove			= mt9t031_video_remove,
 	.init			= mt9t031_init,
 	.release		= mt9t031_release,
 	.start_capture		= mt9t031_start_capture,
@@ -524,8 +520,8 @@ static struct soc_camera_ops mt9t031_ops = {
 
 static int mt9t031_get_control(struct soc_camera_device *icd, struct v4l2_control *ctrl)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
-	struct mt9t031 *mt9t031 = container_of(icd, struct mt9t031, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct mt9t031 *mt9t031 = i2c_get_clientdata(client);
 	int data;
 
 	switch (ctrl->id) {
@@ -550,8 +546,8 @@ static int mt9t031_get_control(struct soc_camera_device *icd, struct v4l2_contro
 
 static int mt9t031_set_control(struct soc_camera_device *icd, struct v4l2_control *ctrl)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
-	struct mt9t031 *mt9t031 = container_of(icd, struct mt9t031, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct mt9t031 *mt9t031 = i2c_get_clientdata(client);
 	const struct v4l2_queryctrl *qctrl;
 	int data;
 
@@ -657,10 +653,10 @@ static int mt9t031_set_control(struct soc_camera_device *icd, struct v4l2_contro
 
 /* Interface active, can use i2c. If it fails, it can indeed mean, that
  * this wasn't our capture interface, so, we wait for the right one */
-static int mt9t031_video_probe(struct soc_camera_device *icd)
+static int mt9t031_video_probe(struct soc_camera_device *icd,
+			       struct i2c_client *client)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
-	struct mt9t031 *mt9t031 = container_of(icd, struct mt9t031, icd);
+	struct mt9t031 *mt9t031 = i2c_get_clientdata(client);
 	s32 data;
 	int ret;
 
@@ -670,6 +666,11 @@ static int mt9t031_video_probe(struct soc_camera_device *icd)
 	    to_soc_camera_host(icd->dev.parent)->nr != icd->iface)
 		return -ENODEV;
 
+	/* Switch master clock on */
+	ret = soc_camera_video_start(icd, &client->dev);
+	if (ret)
+		return ret;
+
 	/* Enable the chip */
 	data = reg_write(client, MT9T031_CHIP_ENABLE, 1);
 	dev_dbg(&icd->dev, "write: %d\n", data);
@@ -677,6 +678,8 @@ static int mt9t031_video_probe(struct soc_camera_device *icd)
 	/* Read out the chip version register */
 	data = reg_read(client, MT9T031_CHIP_VERSION);
 
+	soc_camera_video_stop(icd);
+
 	switch (data) {
 	case 0x1621:
 		mt9t031->model = V4L2_IDENT_MT9T031;
@@ -684,44 +687,31 @@ static int mt9t031_video_probe(struct soc_camera_device *icd)
 		icd->num_formats = ARRAY_SIZE(mt9t031_colour_formats);
 		break;
 	default:
-		ret = -ENODEV;
 		dev_err(&icd->dev,
 			"No MT9T031 chip detected, register read %x\n", data);
-		goto ei2c;
+		return -ENODEV;
 	}
 
 	dev_info(&icd->dev, "Detected a MT9T031 chip ID %x\n", data);
 
-	/* Now that we know the model, we can start video */
-	ret = soc_camera_video_start(icd);
-	if (ret)
-		goto evstart;
-
 	return 0;
-
-evstart:
-ei2c:
-	return ret;
-}
-
-static void mt9t031_video_remove(struct soc_camera_device *icd)
-{
-	struct mt9t031 *mt9t031 = container_of(icd, struct mt9t031, icd);
-
-	dev_dbg(&icd->dev, "Video %x removed: %p, %p\n", mt9t031->client->addr,
-		icd->dev.parent, icd->vdev);
-	soc_camera_video_stop(icd);
 }
 
 static int mt9t031_probe(struct i2c_client *client,
 			 const struct i2c_device_id *did)
 {
 	struct mt9t031 *mt9t031;
-	struct soc_camera_device *icd;
+	struct soc_camera_device *icd = client->dev.platform_data;
 	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
-	struct soc_camera_link *icl = client->dev.platform_data;
+	struct soc_camera_link *icl;
 	int ret;
 
+	if (!icd) {
+		dev_err(&client->dev, "MT9T031: missing soc-camera data!\n");
+		return -EINVAL;
+	}
+
+	icl = to_soc_camera_link(icd);
 	if (!icl) {
 		dev_err(&client->dev, "MT9T031 driver needs platform data\n");
 		return -EINVAL;
@@ -737,13 +727,10 @@ static int mt9t031_probe(struct i2c_client *client,
 	if (!mt9t031)
 		return -ENOMEM;
 
-	mt9t031->client = client;
 	i2c_set_clientdata(client, mt9t031);
 
 	/* Second stage probe - when a capture adapter is there */
-	icd = &mt9t031->icd;
 	icd->ops	= &mt9t031_ops;
-	icd->control	= &client->dev;
 	icd->x_min	= MT9T031_COLUMN_SKIP;
 	icd->y_min	= MT9T031_ROW_SKIP;
 	icd->x_current	= icd->x_min;
@@ -753,7 +740,6 @@ static int mt9t031_probe(struct i2c_client *client,
 	icd->height_min	= MT9T031_MIN_HEIGHT;
 	icd->height_max	= MT9T031_MAX_HEIGHT;
 	icd->y_skip_top	= 0;
-	icd->iface	= icl->bus_id;
 	/* Simulated autoexposure. If enabled, we calculate shutter width
 	 * ourselves in the driver based on vertical blanking and frame width */
 	mt9t031->autoexposure = 1;
@@ -761,24 +747,24 @@ static int mt9t031_probe(struct i2c_client *client,
 	mt9t031->xskip = 1;
 	mt9t031->yskip = 1;
 
-	ret = soc_camera_device_register(icd);
-	if (ret)
-		goto eisdr;
-
-	return 0;
+	ret = mt9t031_video_probe(icd, client);
+	if (ret) {
+		icd->ops = NULL;
+		i2c_set_clientdata(client, NULL);
+		kfree(mt9t031);
+	}
 
-eisdr:
-	i2c_set_clientdata(client, NULL);
-	kfree(mt9t031);
 	return ret;
 }
 
 static int mt9t031_remove(struct i2c_client *client)
 {
 	struct mt9t031 *mt9t031 = i2c_get_clientdata(client);
+	struct soc_camera_device *icd = client->dev.platform_data;
 
-	soc_camera_device_unregister(&mt9t031->icd);
+	icd->ops = NULL;
 	i2c_set_clientdata(client, NULL);
+	client->driver = NULL;
 	kfree(mt9t031);
 
 	return 0;
diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c
index dbdcc86ae50..959cc299f1a 100644
--- a/drivers/media/video/mt9v022.c
+++ b/drivers/media/video/mt9v022.c
@@ -85,8 +85,6 @@ static const struct soc_camera_data_format mt9v022_monochrome_formats[] = {
 };
 
 struct mt9v022 {
-	struct i2c_client *client;
-	struct soc_camera_device icd;
 	int model;	/* V4L2_IDENT_MT9V022* codes from v4l2-chip-ident.h */
 	u16 chip_control;
 };
@@ -127,9 +125,9 @@ static int reg_clear(struct i2c_client *client, const u8 reg,
 
 static int mt9v022_init(struct soc_camera_device *icd)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
-	struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd);
-	struct soc_camera_link *icl = client->dev.platform_data;
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
+	struct mt9v022 *mt9v022 = i2c_get_clientdata(client);
 	int ret;
 
 	if (icl->power) {
@@ -173,19 +171,19 @@ static int mt9v022_init(struct soc_camera_device *icd)
 
 static int mt9v022_release(struct soc_camera_device *icd)
 {
-	struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd);
-	struct soc_camera_link *icl = mt9v022->client->dev.platform_data;
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
 
 	if (icl->power)
-		icl->power(&mt9v022->client->dev, 0);
+		icl->power(&client->dev, 0);
 
 	return 0;
 }
 
 static int mt9v022_start_capture(struct soc_camera_device *icd)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
-	struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct mt9v022 *mt9v022 = i2c_get_clientdata(client);
 	/* Switch to master "normal" mode */
 	mt9v022->chip_control &= ~0x10;
 	if (reg_write(client, MT9V022_CHIP_CONTROL,
@@ -196,8 +194,8 @@ static int mt9v022_start_capture(struct soc_camera_device *icd)
 
 static int mt9v022_stop_capture(struct soc_camera_device *icd)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
-	struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct mt9v022 *mt9v022 = i2c_get_clientdata(client);
 	/* Switch to snapshot mode */
 	mt9v022->chip_control |= 0x10;
 	if (reg_write(client, MT9V022_CHIP_CONTROL,
@@ -209,9 +207,9 @@ static int mt9v022_stop_capture(struct soc_camera_device *icd)
 static int mt9v022_set_bus_param(struct soc_camera_device *icd,
 				 unsigned long flags)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
-	struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd);
-	struct soc_camera_link *icl = client->dev.platform_data;
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct mt9v022 *mt9v022 = i2c_get_clientdata(client);
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
 	unsigned int width_flag = flags & SOCAM_DATAWIDTH_MASK;
 	int ret;
 	u16 pixclk = 0;
@@ -263,8 +261,7 @@ static int mt9v022_set_bus_param(struct soc_camera_device *icd,
 
 static unsigned long mt9v022_query_bus_param(struct soc_camera_device *icd)
 {
-	struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd);
-	struct soc_camera_link *icl = mt9v022->client->dev.platform_data;
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
 	unsigned int width_flag;
 
 	if (icl->query_bus_param)
@@ -283,7 +280,7 @@ static unsigned long mt9v022_query_bus_param(struct soc_camera_device *icd)
 static int mt9v022_set_crop(struct soc_camera_device *icd,
 			    struct v4l2_rect *rect)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 	int ret;
 
 	/* Like in example app. Contradicts the datasheet though */
@@ -326,7 +323,8 @@ static int mt9v022_set_crop(struct soc_camera_device *icd,
 static int mt9v022_set_fmt(struct soc_camera_device *icd,
 			   struct v4l2_format *f)
 {
-	struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct mt9v022 *mt9v022 = i2c_get_clientdata(client);
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 	struct v4l2_rect rect = {
 		.left	= icd->x_current,
@@ -374,12 +372,13 @@ static int mt9v022_try_fmt(struct soc_camera_device *icd,
 static int mt9v022_get_chip_id(struct soc_camera_device *icd,
 			       struct v4l2_dbg_chip_ident *id)
 {
-	struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct mt9v022 *mt9v022 = i2c_get_clientdata(client);
 
 	if (id->match.type != V4L2_CHIP_MATCH_I2C_ADDR)
 		return -EINVAL;
 
-	if (id->match.addr != mt9v022->client->addr)
+	if (id->match.addr != client->addr)
 		return -ENODEV;
 
 	id->ident	= mt9v022->model;
@@ -392,7 +391,7 @@ static int mt9v022_get_chip_id(struct soc_camera_device *icd,
 static int mt9v022_get_register(struct soc_camera_device *icd,
 				struct v4l2_dbg_register *reg)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 
 	if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff)
 		return -EINVAL;
@@ -412,7 +411,7 @@ static int mt9v022_get_register(struct soc_camera_device *icd,
 static int mt9v022_set_register(struct soc_camera_device *icd,
 				struct v4l2_dbg_register *reg)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 
 	if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff)
 		return -EINVAL;
@@ -481,15 +480,11 @@ static const struct v4l2_queryctrl mt9v022_controls[] = {
 	}
 };
 
-static int mt9v022_video_probe(struct soc_camera_device *);
-static void mt9v022_video_remove(struct soc_camera_device *);
 static int mt9v022_get_control(struct soc_camera_device *, struct v4l2_control *);
 static int mt9v022_set_control(struct soc_camera_device *, struct v4l2_control *);
 
 static struct soc_camera_ops mt9v022_ops = {
 	.owner			= THIS_MODULE,
-	.probe			= mt9v022_video_probe,
-	.remove			= mt9v022_video_remove,
 	.init			= mt9v022_init,
 	.release		= mt9v022_release,
 	.start_capture		= mt9v022_start_capture,
@@ -513,7 +508,7 @@ static struct soc_camera_ops mt9v022_ops = {
 static int mt9v022_get_control(struct soc_camera_device *icd,
 			       struct v4l2_control *ctrl)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 	int data;
 
 	switch (ctrl->id) {
@@ -549,7 +544,7 @@ static int mt9v022_set_control(struct soc_camera_device *icd,
 			       struct v4l2_control *ctrl)
 {
 	int data;
-	struct i2c_client *client = to_i2c_client(icd->control);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 	const struct v4l2_queryctrl *qctrl;
 
 	qctrl = soc_camera_find_qctrl(&mt9v022_ops, ctrl->id);
@@ -646,11 +641,11 @@ static int mt9v022_set_control(struct soc_camera_device *icd,
 
 /* Interface active, can use i2c. If it fails, it can indeed mean, that
  * this wasn't our capture interface, so, we wait for the right one */
-static int mt9v022_video_probe(struct soc_camera_device *icd)
+static int mt9v022_video_probe(struct soc_camera_device *icd,
+			       struct i2c_client *client)
 {
-	struct i2c_client *client = to_i2c_client(icd->control);
-	struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd);
-	struct soc_camera_link *icl = client->dev.platform_data;
+	struct mt9v022 *mt9v022 = i2c_get_clientdata(client);
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
 	s32 data;
 	int ret;
 	unsigned long flags;
@@ -659,6 +654,11 @@ static int mt9v022_video_probe(struct soc_camera_device *icd)
 	    to_soc_camera_host(icd->dev.parent)->nr != icd->iface)
 		return -ENODEV;
 
+	/* Switch master clock on */
+	ret = soc_camera_video_start(icd, &client->dev);
+	if (ret)
+		return ret;
+
 	/* Read out the chip version register */
 	data = reg_read(client, MT9V022_CHIP_VERSION);
 
@@ -678,6 +678,8 @@ static int mt9v022_video_probe(struct soc_camera_device *icd)
 	udelay(200);
 	if (reg_read(client, MT9V022_RESET)) {
 		dev_err(&icd->dev, "Resetting MT9V022 failed!\n");
+		if (ret > 0)
+			ret = -EIO;
 		goto ei2c;
 	}
 
@@ -694,7 +696,7 @@ static int mt9v022_video_probe(struct soc_camera_device *icd)
 	}
 
 	if (ret < 0)
-		goto eisis;
+		goto ei2c;
 
 	icd->num_formats = 0;
 
@@ -716,29 +718,23 @@ static int mt9v022_video_probe(struct soc_camera_device *icd)
 	if (flags & SOCAM_DATAWIDTH_8)
 		icd->num_formats++;
 
-	ret = soc_camera_video_start(icd);
-	if (ret < 0)
-		goto eisis;
-
 	dev_info(&icd->dev, "Detected a MT9V022 chip ID %x, %s sensor\n",
 		 data, mt9v022->model == V4L2_IDENT_MT9V022IX7ATM ?
 		 "monochrome" : "colour");
 
-	return 0;
-
-eisis:
 ei2c:
+	soc_camera_video_stop(icd);
+
 	return ret;
 }
 
 static void mt9v022_video_remove(struct soc_camera_device *icd)
 {
-	struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd);
-	struct soc_camera_link *icl = mt9v022->client->dev.platform_data;
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
 
-	dev_dbg(&icd->dev, "Video %x removed: %p, %p\n", mt9v022->client->addr,
+	dev_dbg(&icd->dev, "Video %x removed: %p, %p\n", client->addr,
 		icd->dev.parent, icd->vdev);
-	soc_camera_video_stop(icd);
 	if (icl->free_bus)
 		icl->free_bus(icl);
 }
@@ -747,11 +743,17 @@ static int mt9v022_probe(struct i2c_client *client,
 			 const struct i2c_device_id *did)
 {
 	struct mt9v022 *mt9v022;
-	struct soc_camera_device *icd;
+	struct soc_camera_device *icd = client->dev.platform_data;
 	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
-	struct soc_camera_link *icl = client->dev.platform_data;
+	struct soc_camera_link *icl;
 	int ret;
 
+	if (!icd) {
+		dev_err(&client->dev, "MT9V022: missing soc-camera data!\n");
+		return -EINVAL;
+	}
+
+	icl = to_soc_camera_link(icd);
 	if (!icl) {
 		dev_err(&client->dev, "MT9V022 driver needs platform data\n");
 		return -EINVAL;
@@ -768,12 +770,9 @@ static int mt9v022_probe(struct i2c_client *client,
 		return -ENOMEM;
 
 	mt9v022->chip_control = MT9V022_CHIP_CONTROL_DEFAULT;
-	mt9v022->client = client;
 	i2c_set_clientdata(client, mt9v022);
 
-	icd = &mt9v022->icd;
 	icd->ops	= &mt9v022_ops;
-	icd->control	= &client->dev;
 	icd->x_min	= 1;
 	icd->y_min	= 4;
 	icd->x_current	= 1;
@@ -783,24 +782,26 @@ static int mt9v022_probe(struct i2c_client *client,
 	icd->height_min	= 32;
 	icd->height_max	= 480;
 	icd->y_skip_top	= 1;
-	icd->iface	= icl->bus_id;
-
-	ret = soc_camera_device_register(icd);
-	if (ret)
-		goto eisdr;
 
-	return 0;
+	ret = mt9v022_video_probe(icd, client);
+	if (ret) {
+		icd->ops = NULL;
+		i2c_set_clientdata(client, NULL);
+		kfree(mt9v022);
+	}
 
-eisdr:
-	kfree(mt9v022);
 	return ret;
 }
 
 static int mt9v022_remove(struct i2c_client *client)
 {
 	struct mt9v022 *mt9v022 = i2c_get_clientdata(client);
+	struct soc_camera_device *icd = client->dev.platform_data;
 
-	soc_camera_device_unregister(&mt9v022->icd);
+	icd->ops = NULL;
+	mt9v022_video_remove(icd);
+	i2c_set_clientdata(client, NULL);
+	client->driver = NULL;
 	kfree(mt9v022);
 
 	return 0;
diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c
index 9770cb7932c..2edf77a6256 100644
--- a/drivers/media/video/mx3_camera.c
+++ b/drivers/media/video/mx3_camera.c
@@ -503,18 +503,19 @@ static int mx3_camera_add_device(struct soc_camera_device *icd)
 
 	mx3_camera_activate(mx3_cam, icd);
 	ret = icd->ops->init(icd);
-	if (ret < 0) {
-		clk_disable(mx3_cam->clk);
+	if (ret < 0)
 		goto einit;
-	}
 
 	mx3_cam->icd = icd;
 
+	dev_info(&icd->dev, "MX3 Camera driver attached to camera %d\n",
+		 icd->devnum);
+
+	return 0;
+
 einit:
+	clk_disable(mx3_cam->clk);
 ebusy:
-	if (!ret)
-		dev_info(&icd->dev, "MX3 Camera driver attached to camera %d\n",
-			 icd->devnum);
 
 	return ret;
 }
@@ -947,9 +948,10 @@ static int mx3_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
 	camera_flags = icd->ops->query_bus_param(icd);
 
 	common_flags = soc_camera_bus_param_compatible(camera_flags, bus_flags);
+	dev_dbg(ici->dev, "Flags cam: 0x%lx host: 0x%lx common: 0x%lx\n",
+		camera_flags, bus_flags, common_flags);
 	if (!common_flags) {
-		dev_dbg(ici->dev, "no common flags: camera %lx, host %lx\n",
-			camera_flags, bus_flags);
+		dev_dbg(ici->dev, "no common flags");
 		return -EINVAL;
 	}
 
@@ -1002,8 +1004,11 @@ static int mx3_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
 			SOCAM_DATAWIDTH_4;
 
 	ret = icd->ops->set_bus_param(icd, common_flags);
-	if (ret < 0)
+	if (ret < 0) {
+		dev_dbg(ici->dev, "camera set_bus_param(%lx) returned %d\n",
+			common_flags, ret);
 		return ret;
+	}
 
 	/*
 	 * So far only gated clock mode is supported. Add a line
@@ -1127,8 +1132,9 @@ static int __devinit mx3_camera_probe(struct platform_device *pdev)
 	INIT_LIST_HEAD(&mx3_cam->capture);
 	spin_lock_init(&mx3_cam->lock);
 
-	base = ioremap(res->start, res->end - res->start + 1);
+	base = ioremap(res->start, resource_size(res));
 	if (!base) {
+		pr_err("Couldn't map %x@%x\n", resource_size(res), res->start);
 		err = -ENOMEM;
 		goto eioremap;
 	}
@@ -1215,3 +1221,4 @@ module_exit(mx3_camera_exit);
 MODULE_DESCRIPTION("i.MX3x SoC Camera Host driver");
 MODULE_AUTHOR("Guennadi Liakhovetski <lg@denx.de>");
 MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" MX3_CAM_DRV_NAME);
diff --git a/drivers/media/video/ov772x.c b/drivers/media/video/ov772x.c
index 0bce255168b..3ea650d55b1 100644
--- a/drivers/media/video/ov772x.c
+++ b/drivers/media/video/ov772x.c
@@ -399,8 +399,6 @@ struct ov772x_win_size {
 
 struct ov772x_priv {
 	struct ov772x_camera_info        *info;
-	struct i2c_client                *client;
-	struct soc_camera_device          icd;
 	const struct ov772x_color_format *fmt;
 	const struct ov772x_win_size     *win;
 	int                               model;
@@ -619,53 +617,56 @@ static int ov772x_reset(struct i2c_client *client)
 
 static int ov772x_init(struct soc_camera_device *icd)
 {
-	struct ov772x_priv *priv = container_of(icd, struct ov772x_priv, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
 	int ret = 0;
 
-	if (priv->info->link.power) {
-		ret = priv->info->link.power(&priv->client->dev, 1);
+	if (icl->power) {
+		ret = icl->power(&client->dev, 1);
 		if (ret < 0)
 			return ret;
 	}
 
-	if (priv->info->link.reset)
-		ret = priv->info->link.reset(&priv->client->dev);
+	if (icl->reset)
+		ret = icl->reset(&client->dev);
 
 	return ret;
 }
 
 static int ov772x_release(struct soc_camera_device *icd)
 {
-	struct ov772x_priv *priv = container_of(icd, struct ov772x_priv, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
 	int ret = 0;
 
-	if (priv->info->link.power)
-		ret = priv->info->link.power(&priv->client->dev, 0);
+	if (icl->power)
+		ret = icl->power(&client->dev, 0);
 
 	return ret;
 }
 
 static int ov772x_start_capture(struct soc_camera_device *icd)
 {
-	struct ov772x_priv *priv = container_of(icd, struct ov772x_priv, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct ov772x_priv *priv = i2c_get_clientdata(client);
 
 	if (!priv->win || !priv->fmt) {
 		dev_err(&icd->dev, "norm or win select error\n");
 		return -EPERM;
 	}
 
-	ov772x_mask_set(priv->client, COM2, SOFT_SLEEP_MODE, 0);
+	ov772x_mask_set(client, COM2, SOFT_SLEEP_MODE, 0);
 
 	dev_dbg(&icd->dev,
-		 "format %s, win %s\n", priv->fmt->name, priv->win->name);
+		"format %s, win %s\n", priv->fmt->name, priv->win->name);
 
 	return 0;
 }
 
 static int ov772x_stop_capture(struct soc_camera_device *icd)
 {
-	struct ov772x_priv *priv = container_of(icd, struct ov772x_priv, icd);
-	ov772x_mask_set(priv->client, COM2, SOFT_SLEEP_MODE, SOFT_SLEEP_MODE);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	ov772x_mask_set(client, COM2, SOFT_SLEEP_MODE, SOFT_SLEEP_MODE);
 	return 0;
 }
 
@@ -677,8 +678,9 @@ static int ov772x_set_bus_param(struct soc_camera_device *icd,
 
 static unsigned long ov772x_query_bus_param(struct soc_camera_device *icd)
 {
-	struct ov772x_priv *priv = container_of(icd, struct ov772x_priv, icd);
-	struct soc_camera_link *icl = &priv->info->link;
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct ov772x_priv *priv = i2c_get_clientdata(client);
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
 	unsigned long flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_MASTER |
 		SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_HIGH |
 		SOCAM_DATA_ACTIVE_HIGH | priv->info->buswidth;
@@ -689,7 +691,8 @@ static unsigned long ov772x_query_bus_param(struct soc_camera_device *icd)
 static int ov772x_get_control(struct soc_camera_device *icd,
 			      struct v4l2_control *ctrl)
 {
-	struct ov772x_priv *priv = container_of(icd, struct ov772x_priv, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct ov772x_priv *priv = i2c_get_clientdata(client);
 
 	switch (ctrl->id) {
 	case V4L2_CID_VFLIP:
@@ -705,7 +708,8 @@ static int ov772x_get_control(struct soc_camera_device *icd,
 static int ov772x_set_control(struct soc_camera_device *icd,
 			      struct v4l2_control *ctrl)
 {
-	struct ov772x_priv *priv = container_of(icd, struct ov772x_priv, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct ov772x_priv *priv = i2c_get_clientdata(client);
 	int ret = 0;
 	u8 val;
 
@@ -715,14 +719,14 @@ static int ov772x_set_control(struct soc_camera_device *icd,
 		priv->flag_vflip = ctrl->value;
 		if (priv->info->flags & OV772X_FLAG_VFLIP)
 			val ^= VFLIP_IMG;
-		ret = ov772x_mask_set(priv->client, COM3, VFLIP_IMG, val);
+		ret = ov772x_mask_set(client, COM3, VFLIP_IMG, val);
 		break;
 	case V4L2_CID_HFLIP:
 		val = ctrl->value ? HFLIP_IMG : 0x00;
 		priv->flag_hflip = ctrl->value;
 		if (priv->info->flags & OV772X_FLAG_HFLIP)
 			val ^= HFLIP_IMG;
-		ret = ov772x_mask_set(priv->client, COM3, HFLIP_IMG, val);
+		ret = ov772x_mask_set(client, COM3, HFLIP_IMG, val);
 		break;
 	}
 
@@ -730,9 +734,10 @@ static int ov772x_set_control(struct soc_camera_device *icd,
 }
 
 static int ov772x_get_chip_id(struct soc_camera_device *icd,
-			      struct v4l2_dbg_chip_ident   *id)
+			      struct v4l2_dbg_chip_ident *id)
 {
-	struct ov772x_priv *priv = container_of(icd, struct ov772x_priv, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct ov772x_priv *priv = i2c_get_clientdata(client);
 
 	id->ident    = priv->model;
 	id->revision = 0;
@@ -744,14 +749,14 @@ static int ov772x_get_chip_id(struct soc_camera_device *icd,
 static int ov772x_get_register(struct soc_camera_device *icd,
 			       struct v4l2_dbg_register *reg)
 {
-	struct ov772x_priv *priv = container_of(icd, struct ov772x_priv, icd);
-	int                 ret;
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	int ret;
 
 	reg->size = 1;
 	if (reg->reg > 0xff)
 		return -EINVAL;
 
-	ret = i2c_smbus_read_byte_data(priv->client, reg->reg);
+	ret = i2c_smbus_read_byte_data(client, reg->reg);
 	if (ret < 0)
 		return ret;
 
@@ -763,13 +768,13 @@ static int ov772x_get_register(struct soc_camera_device *icd,
 static int ov772x_set_register(struct soc_camera_device *icd,
 			       struct v4l2_dbg_register *reg)
 {
-	struct ov772x_priv *priv = container_of(icd, struct ov772x_priv, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 
 	if (reg->reg > 0xff ||
 	    reg->val > 0xff)
 		return -EINVAL;
 
-	return i2c_smbus_write_byte_data(priv->client, reg->reg, reg->val);
+	return i2c_smbus_write_byte_data(client, reg->reg, reg->val);
 }
 #endif
 
@@ -793,9 +798,11 @@ ov772x_select_win(u32 width, u32 height)
 	return win;
 }
 
-static int ov772x_set_params(struct ov772x_priv *priv, u32 width, u32 height,
-			     u32 pixfmt)
+static int ov772x_set_params(struct soc_camera_device *icd,
+			     u32 width, u32 height, u32 pixfmt)
 {
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct ov772x_priv *priv = i2c_get_clientdata(client);
 	int ret = -EINVAL;
 	u8  val;
 	int i;
@@ -810,6 +817,7 @@ static int ov772x_set_params(struct ov772x_priv *priv, u32 width, u32 height,
 			break;
 		}
 	}
+	dev_dbg(&icd->dev, "Using fmt %x #%d\n", pixfmt, i);
 	if (!priv->fmt)
 		goto ov772x_set_fmt_error;
 
@@ -821,7 +829,7 @@ static int ov772x_set_params(struct ov772x_priv *priv, u32 width, u32 height,
 	/*
 	 * reset hardware
 	 */
-	ov772x_reset(priv->client);
+	ov772x_reset(client);
 
 	/*
 	 * Edge Ctrl
@@ -835,17 +843,17 @@ static int ov772x_set_params(struct ov772x_priv *priv, u32 width, u32 height,
 		 * Remove it when manual mode.
 		 */
 
-		ret = ov772x_mask_set(priv->client, DSPAUTO, EDGE_ACTRL, 0x00);
+		ret = ov772x_mask_set(client, DSPAUTO, EDGE_ACTRL, 0x00);
 		if (ret < 0)
 			goto ov772x_set_fmt_error;
 
-		ret = ov772x_mask_set(priv->client,
+		ret = ov772x_mask_set(client,
 				      EDGE_TRSHLD, EDGE_THRESHOLD_MASK,
 				      priv->info->edgectrl.threshold);
 		if (ret < 0)
 			goto ov772x_set_fmt_error;
 
-		ret = ov772x_mask_set(priv->client,
+		ret = ov772x_mask_set(client,
 				      EDGE_STRNGT, EDGE_STRENGTH_MASK,
 				      priv->info->edgectrl.strength);
 		if (ret < 0)
@@ -857,13 +865,13 @@ static int ov772x_set_params(struct ov772x_priv *priv, u32 width, u32 height,
 		 *
 		 * set upper and lower limit
 		 */
-		ret = ov772x_mask_set(priv->client,
+		ret = ov772x_mask_set(client,
 				      EDGE_UPPER, EDGE_UPPER_MASK,
 				      priv->info->edgectrl.upper);
 		if (ret < 0)
 			goto ov772x_set_fmt_error;
 
-		ret = ov772x_mask_set(priv->client,
+		ret = ov772x_mask_set(client,
 				      EDGE_LOWER, EDGE_LOWER_MASK,
 				      priv->info->edgectrl.lower);
 		if (ret < 0)
@@ -873,7 +881,7 @@ static int ov772x_set_params(struct ov772x_priv *priv, u32 width, u32 height,
 	/*
 	 * set size format
 	 */
-	ret = ov772x_write_array(priv->client, priv->win->regs);
+	ret = ov772x_write_array(client, priv->win->regs);
 	if (ret < 0)
 		goto ov772x_set_fmt_error;
 
@@ -882,7 +890,7 @@ static int ov772x_set_params(struct ov772x_priv *priv, u32 width, u32 height,
 	 */
 	val = priv->fmt->dsp3;
 	if (val) {
-		ret = ov772x_mask_set(priv->client,
+		ret = ov772x_mask_set(client,
 				      DSP_CTRL3, UV_MASK, val);
 		if (ret < 0)
 			goto ov772x_set_fmt_error;
@@ -901,7 +909,7 @@ static int ov772x_set_params(struct ov772x_priv *priv, u32 width, u32 height,
 	if (priv->flag_hflip)
 		val ^= HFLIP_IMG;
 
-	ret = ov772x_mask_set(priv->client,
+	ret = ov772x_mask_set(client,
 			      COM3, SWAP_MASK | IMG_MASK, val);
 	if (ret < 0)
 		goto ov772x_set_fmt_error;
@@ -910,7 +918,7 @@ static int ov772x_set_params(struct ov772x_priv *priv, u32 width, u32 height,
 	 * set COM7
 	 */
 	val = priv->win->com7_bit | priv->fmt->com7;
-	ret = ov772x_mask_set(priv->client,
+	ret = ov772x_mask_set(client,
 			      COM7, (SLCT_MASK | FMT_MASK | OFMT_MASK),
 			      val);
 	if (ret < 0)
@@ -920,7 +928,7 @@ static int ov772x_set_params(struct ov772x_priv *priv, u32 width, u32 height,
 
 ov772x_set_fmt_error:
 
-	ov772x_reset(priv->client);
+	ov772x_reset(client);
 	priv->win = NULL;
 	priv->fmt = NULL;
 
@@ -930,22 +938,22 @@ ov772x_set_fmt_error:
 static int ov772x_set_crop(struct soc_camera_device *icd,
 			   struct v4l2_rect *rect)
 {
-	struct ov772x_priv *priv = container_of(icd, struct ov772x_priv, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct ov772x_priv *priv = i2c_get_clientdata(client);
 
 	if (!priv->fmt)
 		return -EINVAL;
 
-	return ov772x_set_params(priv, rect->width, rect->height,
+	return ov772x_set_params(icd, rect->width, rect->height,
 				 priv->fmt->fourcc);
 }
 
 static int ov772x_set_fmt(struct soc_camera_device *icd,
 			  struct v4l2_format *f)
 {
-	struct ov772x_priv *priv = container_of(icd, struct ov772x_priv, icd);
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 
-	return ov772x_set_params(priv, pix->width, pix->height,
+	return ov772x_set_params(icd, pix->width, pix->height,
 				 pix->pixelformat);
 }
 
@@ -967,11 +975,13 @@ static int ov772x_try_fmt(struct soc_camera_device *icd,
 	return 0;
 }
 
-static int ov772x_video_probe(struct soc_camera_device *icd)
+static int ov772x_video_probe(struct soc_camera_device *icd,
+			      struct i2c_client *client)
 {
-	struct ov772x_priv *priv = container_of(icd, struct ov772x_priv, icd);
+	struct ov772x_priv *priv = i2c_get_clientdata(client);
 	u8                  pid, ver;
 	const char         *devname;
+	int ret;
 
 	/*
 	 * We must have a parent by now. And it cannot be a wrong one.
@@ -993,11 +1003,16 @@ static int ov772x_video_probe(struct soc_camera_device *icd)
 	icd->formats     = ov772x_fmt_lists;
 	icd->num_formats = ARRAY_SIZE(ov772x_fmt_lists);
 
+	/* Switch master clock on */
+	ret = soc_camera_video_start(icd, &client->dev);
+	if (ret)
+		return ret;
+
 	/*
 	 * check and show product ID and manufacturer ID
 	 */
-	pid = i2c_smbus_read_byte_data(priv->client, PID);
-	ver = i2c_smbus_read_byte_data(priv->client, VER);
+	pid = i2c_smbus_read_byte_data(client, PID);
+	ver = i2c_smbus_read_byte_data(client, VER);
 
 	switch (VERSION(pid, ver)) {
 	case OV7720:
@@ -1011,7 +1026,8 @@ static int ov772x_video_probe(struct soc_camera_device *icd)
 	default:
 		dev_err(&icd->dev,
 			"Product ID error %x:%x\n", pid, ver);
-		return -ENODEV;
+		ret = -ENODEV;
+		goto ever;
 	}
 
 	dev_info(&icd->dev,
@@ -1019,21 +1035,17 @@ static int ov772x_video_probe(struct soc_camera_device *icd)
 		 devname,
 		 pid,
 		 ver,
-		 i2c_smbus_read_byte_data(priv->client, MIDH),
-		 i2c_smbus_read_byte_data(priv->client, MIDL));
-
-	return soc_camera_video_start(icd);
-}
+		 i2c_smbus_read_byte_data(client, MIDH),
+		 i2c_smbus_read_byte_data(client, MIDL));
 
-static void ov772x_video_remove(struct soc_camera_device *icd)
-{
 	soc_camera_video_stop(icd);
+
+ever:
+	return ret;
 }
 
 static struct soc_camera_ops ov772x_ops = {
 	.owner			= THIS_MODULE,
-	.probe			= ov772x_video_probe,
-	.remove			= ov772x_video_remove,
 	.init			= ov772x_init,
 	.release		= ov772x_release,
 	.start_capture		= ov772x_start_capture,
@@ -1059,19 +1071,25 @@ static struct soc_camera_ops ov772x_ops = {
  */
 
 static int ov772x_probe(struct i2c_client *client,
-			 const struct i2c_device_id *did)
+			const struct i2c_device_id *did)
 {
 	struct ov772x_priv        *priv;
 	struct ov772x_camera_info *info;
-	struct soc_camera_device  *icd;
+	struct soc_camera_device  *icd = client->dev.platform_data;
 	struct i2c_adapter        *adapter = to_i2c_adapter(client->dev.parent);
+	struct soc_camera_link    *icl;
 	int                        ret;
 
-	if (!client->dev.platform_data)
+	if (!icd) {
+		dev_err(&client->dev, "MT9M001: missing soc-camera data!\n");
 		return -EINVAL;
+	}
 
-	info = container_of(client->dev.platform_data,
-			    struct ov772x_camera_info, link);
+	icl = to_soc_camera_link(icd);
+	if (!icl)
+		return -EINVAL;
+
+	info = container_of(icl, struct ov772x_camera_info, link);
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
 		dev_err(&adapter->dev,
@@ -1085,19 +1103,15 @@ static int ov772x_probe(struct i2c_client *client,
 		return -ENOMEM;
 
 	priv->info   = info;
-	priv->client = client;
 	i2c_set_clientdata(client, priv);
 
-	icd             = &priv->icd;
 	icd->ops        = &ov772x_ops;
-	icd->control    = &client->dev;
 	icd->width_max  = MAX_WIDTH;
 	icd->height_max = MAX_HEIGHT;
-	icd->iface      = priv->info->link.bus_id;
-
-	ret = soc_camera_device_register(icd);
 
+	ret = ov772x_video_probe(icd, client);
 	if (ret) {
+		icd->ops = NULL;
 		i2c_set_clientdata(client, NULL);
 		kfree(priv);
 	}
@@ -1108,8 +1122,9 @@ static int ov772x_probe(struct i2c_client *client,
 static int ov772x_remove(struct i2c_client *client)
 {
 	struct ov772x_priv *priv = i2c_get_clientdata(client);
+	struct soc_camera_device *icd = client->dev.platform_data;
 
-	soc_camera_device_unregister(&priv->icd);
+	icd->ops = NULL;
 	i2c_set_clientdata(client, NULL);
 	kfree(priv);
 	return 0;
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
index 016bb45ba0c..8b9b44d8683 100644
--- a/drivers/media/video/pxa_camera.c
+++ b/drivers/media/video/pxa_camera.c
@@ -830,7 +830,8 @@ static void pxa_camera_init_videobuf(struct videobuf_queue *q,
 				sizeof(struct pxa_buffer), icd);
 }
 
-static u32 mclk_get_divisor(struct pxa_camera_dev *pcdev)
+static u32 mclk_get_divisor(struct platform_device *pdev,
+			    struct pxa_camera_dev *pcdev)
 {
 	unsigned long mclk = pcdev->mclk;
 	u32 div;
@@ -842,7 +843,7 @@ static u32 mclk_get_divisor(struct pxa_camera_dev *pcdev)
 	/* mclk <= ciclk / 4 (27.4.2) */
 	if (mclk > lcdclk / 4) {
 		mclk = lcdclk / 4;
-		dev_warn(pcdev->soc_host.dev, "Limiting master clock to %lu\n", mclk);
+		dev_warn(&pdev->dev, "Limiting master clock to %lu\n", mclk);
 	}
 
 	/* We verify mclk != 0, so if anyone breaks it, here comes their Oops */
@@ -852,8 +853,8 @@ static u32 mclk_get_divisor(struct pxa_camera_dev *pcdev)
 	if (pcdev->platform_flags & PXA_CAMERA_MCLK_EN)
 		pcdev->mclk = lcdclk / (2 * (div + 1));
 
-	dev_dbg(pcdev->soc_host.dev, "LCD clock %luHz, target freq %luHz, "
-		"divisor %u\n", lcdclk, mclk, div);
+	dev_dbg(&pdev->dev, "LCD clock %luHz, target freq %luHz, divisor %u\n",
+		lcdclk, mclk, div);
 
 	return div;
 }
@@ -958,15 +959,20 @@ static int pxa_camera_add_device(struct soc_camera_device *icd)
 		goto ebusy;
 	}
 
-	dev_info(&icd->dev, "PXA Camera driver attached to camera %d\n",
-		 icd->devnum);
-
 	pxa_camera_activate(pcdev);
 	ret = icd->ops->init(icd);
+	if (ret < 0)
+		goto einit;
+
+	pcdev->icd = icd;
 
-	if (!ret)
-		pcdev->icd = icd;
+	dev_info(&icd->dev, "PXA Camera driver attached to camera %d\n",
+		 icd->devnum);
 
+	return 0;
+
+einit:
+	pxa_camera_deactivate(pcdev);
 ebusy:
 	return ret;
 }
@@ -1575,8 +1581,7 @@ static int __devinit pxa_camera_probe(struct platform_device *pdev)
 		pcdev->mclk = 20000000;
 	}
 
-	pcdev->soc_host.dev = &pdev->dev;
-	pcdev->mclk_divisor = mclk_get_divisor(pcdev);
+	pcdev->mclk_divisor = mclk_get_divisor(pdev, pcdev);
 
 	INIT_LIST_HEAD(&pcdev->capture);
 	spin_lock_init(&pcdev->lock);
@@ -1641,6 +1646,7 @@ static int __devinit pxa_camera_probe(struct platform_device *pdev)
 	pcdev->soc_host.drv_name	= PXA_CAM_DRV_NAME;
 	pcdev->soc_host.ops		= &pxa_soc_camera_host_ops;
 	pcdev->soc_host.priv		= pcdev;
+	pcdev->soc_host.dev		= &pdev->dev;
 	pcdev->soc_host.nr		= pdev->id;
 
 	err = soc_camera_host_register(&pcdev->soc_host);
@@ -1722,3 +1728,4 @@ module_exit(pxa_camera_exit);
 MODULE_DESCRIPTION("PXA27x SoC Camera Host driver");
 MODULE_AUTHOR("Guennadi Liakhovetski <kernel@pengutronix.de>");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" PXA_CAM_DRV_NAME);
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index 61c47b82408..e7ac84daf67 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -356,11 +356,13 @@ static int sh_mobile_ceu_add_device(struct soc_camera_device *icd)
 		 "SuperH Mobile CEU driver attached to camera %d\n",
 		 icd->devnum);
 
+	clk_enable(pcdev->clk);
+
 	ret = icd->ops->init(icd);
-	if (ret)
+	if (ret) {
+		clk_disable(pcdev->clk);
 		goto err;
-
-	pm_runtime_get_sync(ici->dev);
+	}
 
 	ceu_write(pcdev, CAPSR, 1 << 16); /* reset */
 	while (ceu_read(pcdev, CSTSR) & 1)
@@ -394,10 +396,10 @@ static void sh_mobile_ceu_remove_device(struct soc_camera_device *icd)
 	}
 	spin_unlock_irqrestore(&pcdev->lock, flags);
 
-	pm_runtime_put_sync(ici->dev);
-
 	icd->ops->release(icd);
 
+	clk_disable(pcdev->clk);
+
 	dev_info(&icd->dev,
 		 "SuperH Mobile CEU driver detached from camera %d\n",
 		 icd->devnum);
@@ -946,3 +948,4 @@ module_exit(sh_mobile_ceu_exit);
 MODULE_DESCRIPTION("SuperH Mobile CEU driver");
 MODULE_AUTHOR("Magnus Damm");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:sh_mobile_ceu");
diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index 0340754e540..20ef5c773fa 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -21,15 +21,15 @@
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/list.h>
-#include <linux/module.h>
 #include <linux/mutex.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/vmalloc.h>
 
 #include <media/soc_camera.h>
 #include <media/v4l2-common.h>
-#include <media/v4l2-dev.h>
 #include <media/v4l2-ioctl.h>
+#include <media/v4l2-dev.h>
 #include <media/videobuf-core.h>
 
 /* Default to VGA resolution */
@@ -38,7 +38,7 @@
 
 static LIST_HEAD(hosts);
 static LIST_HEAD(devices);
-static DEFINE_MUTEX(list_lock);
+static DEFINE_MUTEX(list_lock);		/* Protects the list of hosts */
 
 const struct soc_camera_data_format *soc_camera_format_by_fourcc(
 	struct soc_camera_device *icd, unsigned int fourcc)
@@ -209,6 +209,7 @@ static int soc_camera_dqbuf(struct file *file, void *priv,
 	return videobuf_dqbuf(&icf->vb_vidq, p, file->f_flags & O_NONBLOCK);
 }
 
+/* Always entered with .video_lock held */
 static int soc_camera_init_user_formats(struct soc_camera_device *icd)
 {
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
@@ -257,9 +258,12 @@ static int soc_camera_init_user_formats(struct soc_camera_device *icd)
 	return 0;
 }
 
+/* Always entered with .video_lock held */
 static void soc_camera_free_user_formats(struct soc_camera_device *icd)
 {
+	icd->current_fmt = NULL;
 	vfree(icd->user_formats);
+	icd->user_formats = NULL;
 }
 
 /* Called with .vb_lock held */
@@ -310,10 +314,6 @@ static int soc_camera_open(struct file *file)
 	struct soc_camera_file *icf;
 	int ret;
 
-	icf = vmalloc(sizeof(*icf));
-	if (!icf)
-		return -ENOMEM;
-
 	/*
 	 * It is safe to dereference these pointers now as long as a user has
 	 * the video device open - we are protected by the held cdev reference.
@@ -321,8 +321,17 @@ static int soc_camera_open(struct file *file)
 
 	vdev = video_devdata(file);
 	icd = container_of(vdev->parent, struct soc_camera_device, dev);
+
+	if (!icd->ops)
+		/* No device driver attached */
+		return -ENODEV;
+
 	ici = to_soc_camera_host(icd->dev.parent);
 
+	icf = vmalloc(sizeof(*icf));
+	if (!icf)
+		return -ENOMEM;
+
 	if (!try_module_get(icd->ops->owner)) {
 		dev_err(&icd->dev, "Couldn't lock sensor driver.\n");
 		ret = -EINVAL;
@@ -335,7 +344,7 @@ static int soc_camera_open(struct file *file)
 		goto emgi;
 	}
 
-	/* Protect against icd->remove() until we module_get() both drivers. */
+	/* Protect against icd->ops->remove() until we module_get() both drivers. */
 	mutex_lock(&icd->video_lock);
 
 	icf->icd = icd;
@@ -350,11 +359,18 @@ static int soc_camera_open(struct file *file)
 				.width		= icd->width,
 				.height		= icd->height,
 				.field		= icd->field,
-				.pixelformat	= icd->current_fmt->fourcc,
-				.colorspace	= icd->current_fmt->colorspace,
 			},
 		};
 
+		ret = soc_camera_init_user_formats(icd);
+		if (ret < 0)
+			goto eiufmt;
+
+		dev_dbg(&icd->dev, "Using fmt %x\n", icd->current_fmt->fourcc);
+
+		f.fmt.pix.pixelformat	= icd->current_fmt->fourcc;
+		f.fmt.pix.colorspace	= icd->current_fmt->colorspace;
+
 		ret = ici->ops->add(icd);
 		if (ret < 0) {
 			dev_err(&icd->dev, "Couldn't activate the camera: %d\n", ret);
@@ -383,6 +399,8 @@ static int soc_camera_open(struct file *file)
 esfmt:
 	ici->ops->remove(icd);
 eiciadd:
+	soc_camera_free_user_formats(icd);
+eiufmt:
 	icd->use_count--;
 	mutex_unlock(&icd->video_lock);
 	module_put(ici->ops->owner);
@@ -402,8 +420,10 @@ static int soc_camera_close(struct file *file)
 
 	mutex_lock(&icd->video_lock);
 	icd->use_count--;
-	if (!icd->use_count)
+	if (!icd->use_count) {
 		ici->ops->remove(icd);
+		soc_camera_free_user_formats(icd);
+	}
 
 	mutex_unlock(&icd->video_lock);
 
@@ -764,29 +784,6 @@ static int soc_camera_s_register(struct file *file, void *fh,
 }
 #endif
 
-static int device_register_link(struct soc_camera_device *icd)
-{
-	int ret = dev_set_name(&icd->dev, "%u-%u", icd->iface, icd->devnum);
-
-	if (!ret)
-		ret = device_register(&icd->dev);
-
-	if (ret < 0) {
-		/* Prevent calling device_unregister() */
-		icd->dev.parent = NULL;
-		dev_err(&icd->dev, "Cannot register device: %d\n", ret);
-	/* Even if probe() was unsuccessful for all registered drivers,
-	 * device_register() returns 0, and we add the link, just to
-	 * document this camera's control device */
-	} else if (icd->control)
-		/* Have to sysfs_remove_link() before device_unregister()? */
-		if (sysfs_create_link(&icd->dev.kobj, &icd->control->kobj,
-				      "control"))
-			dev_warn(&icd->dev,
-				 "Failed creating the control symlink\n");
-	return ret;
-}
-
 /* So far this function cannot fail */
 static void scan_add_host(struct soc_camera_host *ici)
 {
@@ -796,106 +793,124 @@ static void scan_add_host(struct soc_camera_host *ici)
 
 	list_for_each_entry(icd, &devices, list) {
 		if (icd->iface == ici->nr) {
+			int ret;
 			icd->dev.parent = ici->dev;
-			device_register_link(icd);
+			dev_set_name(&icd->dev, "%u-%u", icd->iface,
+				     icd->devnum);
+			ret = device_register(&icd->dev);
+			if (ret < 0) {
+				icd->dev.parent = NULL;
+				dev_err(&icd->dev,
+					"Cannot register device: %d\n", ret);
+			}
 		}
 	}
 
 	mutex_unlock(&list_lock);
 }
 
-/* return: 0 if no match found or a match found and
- * device_register() successful, error code otherwise */
-static int scan_add_device(struct soc_camera_device *icd)
+#ifdef CONFIG_I2C_BOARDINFO
+static int soc_camera_init_i2c(struct soc_camera_device *icd,
+			       struct soc_camera_link *icl)
 {
-	struct soc_camera_host *ici;
-	int ret = 0;
+	struct i2c_client *client;
+	struct i2c_adapter *adap = i2c_get_adapter(icl->i2c_adapter_id);
+	int ret;
 
-	mutex_lock(&list_lock);
+	if (!adap) {
+		ret = -ENODEV;
+		dev_err(&icd->dev, "Cannot get I2C adapter #%d. No driver?\n",
+			icl->i2c_adapter_id);
+		goto ei2cga;
+	}
 
-	list_add_tail(&icd->list, &devices);
+	icl->board_info->platform_data = icd;
 
-	/* Watch out for class_for_each_device / class_find_device API by
-	 * Dave Young <hidave.darkstar@gmail.com> */
-	list_for_each_entry(ici, &hosts, list) {
-		if (icd->iface == ici->nr) {
-			ret = 1;
-			icd->dev.parent = ici->dev;
-			break;
-		}
+	client = i2c_new_device(adap, icl->board_info);
+	if (!client) {
+		ret = -ENOMEM;
+		goto ei2cnd;
 	}
 
-	mutex_unlock(&list_lock);
-
-	if (ret)
-		ret = device_register_link(icd);
+	/*
+	 * We set icd drvdata at two locations - here and in
+	 * soc_camera_video_start(). Depending on the module loading /
+	 * initialisation order one of these locations will be entered first
+	 */
+	/* Use to_i2c_client(dev) to recover the i2c client */
+	dev_set_drvdata(&icd->dev, &client->dev);
 
+	return 0;
+ei2cnd:
+	i2c_put_adapter(adap);
+ei2cga:
 	return ret;
 }
 
+static void soc_camera_free_i2c(struct soc_camera_device *icd)
+{
+	struct i2c_client *client =
+		to_i2c_client(to_soc_camera_control(icd));
+	dev_set_drvdata(&icd->dev, NULL);
+	i2c_unregister_device(client);
+	i2c_put_adapter(client->adapter);
+}
+#else
+#define soc_camera_init_i2c(icd, icl)	(-ENODEV)
+#define soc_camera_free_i2c(icd)	do {} while (0)
+#endif
+
+static int video_dev_create(struct soc_camera_device *icd);
+/* Called during host-driver probe */
 static int soc_camera_probe(struct device *dev)
 {
 	struct soc_camera_device *icd = to_soc_camera_dev(dev);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
 	int ret;
 
-	/*
-	 * Possible race scenario:
-	 * modprobe <camera-host-driver> triggers __func__
-	 * at this moment respective <camera-sensor-driver> gets rmmod'ed
-	 * to protect take module references.
-	 */
+	dev_info(dev, "Probing %s\n", dev_name(dev));
 
-	if (!try_module_get(icd->ops->owner)) {
-		dev_err(&icd->dev, "Couldn't lock sensor driver.\n");
-		ret = -EINVAL;
-		goto emgd;
-	}
+	ret = video_dev_create(icd);
+	if (ret < 0)
+		goto evdc;
 
-	if (!try_module_get(ici->ops->owner)) {
-		dev_err(&icd->dev, "Couldn't lock capture bus driver.\n");
+	/* Non-i2c cameras, e.g., soc_camera_platform, have no board_info */
+	if (icl->board_info) {
+		ret = soc_camera_init_i2c(icd, icl);
+		if (ret < 0)
+			goto eadddev;
+	} else if (!icl->add_device || !icl->del_device) {
 		ret = -EINVAL;
-		goto emgi;
+		goto eadddev;
+	} else {
+		ret = icl->add_device(icl, &icd->dev);
+		if (ret < 0)
+			goto eadddev;
 	}
 
-	mutex_lock(&icd->video_lock);
-
-	/* We only call ->add() here to activate and probe the camera.
-	 * We shall ->remove() and deactivate it immediately afterwards. */
-	ret = ici->ops->add(icd);
-	if (ret < 0)
-		goto eiadd;
-
-	ret = icd->ops->probe(icd);
-	if (ret >= 0) {
-		const struct v4l2_queryctrl *qctrl;
+	ret = video_register_device(icd->vdev, VFL_TYPE_GRABBER, icd->vdev->minor);
+	if (ret < 0) {
+		dev_err(&icd->dev, "video_register_device failed: %d\n", ret);
+		goto evidregd;
+	}
 
-		qctrl = soc_camera_find_qctrl(icd->ops, V4L2_CID_GAIN);
-		icd->gain = qctrl ? qctrl->default_value : (unsigned short)~0;
-		qctrl = soc_camera_find_qctrl(icd->ops, V4L2_CID_EXPOSURE);
-		icd->exposure = qctrl ? qctrl->default_value :
-			(unsigned short)~0;
+	/* Do we have to sysfs_remove_link() before device_unregister()? */
+	if (to_soc_camera_control(icd) &&
+	    sysfs_create_link(&icd->dev.kobj, &to_soc_camera_control(icd)->kobj,
+			      "control"))
+		dev_warn(&icd->dev, "Failed creating the control symlink\n");
 
-		ret = soc_camera_init_user_formats(icd);
-		if (ret < 0) {
-			if (icd->ops->remove)
-				icd->ops->remove(icd);
-			goto eiufmt;
-		}
 
-		icd->height	= DEFAULT_HEIGHT;
-		icd->width	= DEFAULT_WIDTH;
-		icd->field	= V4L2_FIELD_ANY;
-	}
+	return 0;
 
-eiufmt:
-	ici->ops->remove(icd);
-eiadd:
-	mutex_unlock(&icd->video_lock);
-	module_put(ici->ops->owner);
-emgi:
-	module_put(icd->ops->owner);
-emgd:
+evidregd:
+	if (icl->board_info)
+		soc_camera_free_i2c(icd);
+	else
+		icl->del_device(icl);
+eadddev:
+	video_device_release(icd->vdev);
+evdc:
 	return ret;
 }
 
@@ -904,13 +919,22 @@ emgd:
 static int soc_camera_remove(struct device *dev)
 {
 	struct soc_camera_device *icd = to_soc_camera_dev(dev);
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
+	struct video_device *vdev = icd->vdev;
 
-	mutex_lock(&icd->video_lock);
-	if (icd->ops->remove)
-		icd->ops->remove(icd);
-	mutex_unlock(&icd->video_lock);
+	BUG_ON(!dev->parent);
 
-	soc_camera_free_user_formats(icd);
+	if (vdev) {
+		mutex_lock(&icd->video_lock);
+		video_unregister_device(vdev);
+		icd->vdev = NULL;
+		mutex_unlock(&icd->video_lock);
+	}
+
+	if (icl->board_info)
+		soc_camera_free_i2c(icd);
+	else
+		icl->del_device(icl);
 
 	return 0;
 }
@@ -1005,10 +1029,14 @@ void soc_camera_host_unregister(struct soc_camera_host *ici)
 
 	list_for_each_entry(icd, &devices, list) {
 		if (icd->dev.parent == ici->dev) {
+			/* The bus->remove will be called */
 			device_unregister(&icd->dev);
 			/* Not before device_unregister(), .remove
 			 * needs parent to call ici->ops->remove() */
 			icd->dev.parent = NULL;
+
+			/* If the host module is loaded again, device_register()
+			 * would complain "already initialised" */
 			memset(&icd->dev.kobj, 0, sizeof(icd->dev.kobj));
 		}
 	}
@@ -1020,26 +1048,14 @@ void soc_camera_host_unregister(struct soc_camera_host *ici)
 EXPORT_SYMBOL(soc_camera_host_unregister);
 
 /* Image capture device */
-int soc_camera_device_register(struct soc_camera_device *icd)
+static int soc_camera_device_register(struct soc_camera_device *icd)
 {
 	struct soc_camera_device *ix;
 	int num = -1, i;
 
-	if (!icd || !icd->ops ||
-	    !icd->ops->probe ||
-	    !icd->ops->init ||
-	    !icd->ops->release ||
-	    !icd->ops->start_capture ||
-	    !icd->ops->stop_capture ||
-	    !icd->ops->set_crop ||
-	    !icd->ops->set_fmt ||
-	    !icd->ops->try_fmt ||
-	    !icd->ops->query_bus_param ||
-	    !icd->ops->set_bus_param)
-		return -EINVAL;
-
 	for (i = 0; i < 256 && num < 0; i++) {
 		num = i;
+		/* Check if this index is available on this interface */
 		list_for_each_entry(ix, &devices, list) {
 			if (ix->iface == icd->iface && ix->devnum == i) {
 				num = -1;
@@ -1061,21 +1077,15 @@ int soc_camera_device_register(struct soc_camera_device *icd)
 	icd->host_priv		= NULL;
 	mutex_init(&icd->video_lock);
 
-	return scan_add_device(icd);
+	list_add_tail(&icd->list, &devices);
+
+	return 0;
 }
-EXPORT_SYMBOL(soc_camera_device_register);
 
-void soc_camera_device_unregister(struct soc_camera_device *icd)
+static void soc_camera_device_unregister(struct soc_camera_device *icd)
 {
-	mutex_lock(&list_lock);
 	list_del(&icd->list);
-
-	/* The bus->remove will be eventually called */
-	if (icd->dev.parent)
-		device_unregister(&icd->dev);
-	mutex_unlock(&list_lock);
 }
-EXPORT_SYMBOL(soc_camera_device_unregister);
 
 static const struct v4l2_ioctl_ops soc_camera_ioctl_ops = {
 	.vidioc_querycap	 = soc_camera_querycap,
@@ -1106,22 +1116,13 @@ static const struct v4l2_ioctl_ops soc_camera_ioctl_ops = {
 #endif
 };
 
-/*
- * Usually called from the struct soc_camera_ops .probe() method, i.e., from
- * soc_camera_probe() above with .video_lock held
- */
-int soc_camera_video_start(struct soc_camera_device *icd)
+static int video_dev_create(struct soc_camera_device *icd)
 {
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
-	int err = -ENOMEM;
-	struct video_device *vdev;
+	struct video_device *vdev = video_device_alloc();
 
-	if (!icd->dev.parent)
-		return -ENODEV;
-
-	vdev = video_device_alloc();
 	if (!vdev)
-		goto evidallocd;
+		return -ENOMEM;
 	dev_dbg(ici->dev, "Allocated video_device %p\n", vdev);
 
 	strlcpy(vdev->name, ici->drv_name, sizeof(vdev->name));
@@ -1132,118 +1133,110 @@ int soc_camera_video_start(struct soc_camera_device *icd)
 	vdev->ioctl_ops		= &soc_camera_ioctl_ops;
 	vdev->release		= video_device_release;
 	vdev->minor		= -1;
-	vdev->tvnorms		= V4L2_STD_UNKNOWN,
+	vdev->tvnorms		= V4L2_STD_UNKNOWN;
 
-	err = video_register_device(vdev, VFL_TYPE_GRABBER, vdev->minor);
-	if (err < 0) {
-		dev_err(vdev->parent, "video_register_device failed\n");
-		goto evidregd;
-	}
 	icd->vdev = vdev;
 
 	return 0;
+}
 
-evidregd:
-	video_device_release(vdev);
-evidallocd:
-	return err;
+/*
+ * Usually called from the struct soc_camera_ops .probe() method, i.e., from
+ * soc_camera_probe() above with .video_lock held
+ */
+int soc_camera_video_start(struct soc_camera_device *icd, struct device *dev)
+{
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	const struct v4l2_queryctrl *qctrl;
+
+	if (!icd->dev.parent)
+		return -ENODEV;
+
+	if (!icd->ops ||
+	    !icd->ops->init ||
+	    !icd->ops->release ||
+	    !icd->ops->start_capture ||
+	    !icd->ops->stop_capture ||
+	    !icd->ops->set_fmt ||
+	    !icd->ops->try_fmt ||
+	    !icd->ops->query_bus_param ||
+	    !icd->ops->set_bus_param)
+		return -EINVAL;
+
+	/* See comment in soc_camera_probe() */
+	dev_set_drvdata(&icd->dev, dev);
+
+	qctrl = soc_camera_find_qctrl(icd->ops, V4L2_CID_GAIN);
+	icd->gain = qctrl ? qctrl->default_value : (unsigned short)~0;
+	qctrl = soc_camera_find_qctrl(icd->ops, V4L2_CID_EXPOSURE);
+	icd->exposure = qctrl ? qctrl->default_value : (unsigned short)~0;
+
+	return ici->ops->add(icd);
 }
 EXPORT_SYMBOL(soc_camera_video_start);
 
 /* Called from client .remove() methods with .video_lock held */
 void soc_camera_video_stop(struct soc_camera_device *icd)
 {
-	struct video_device *vdev = icd->vdev;
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 
 	dev_dbg(&icd->dev, "%s\n", __func__);
 
-	if (!icd->dev.parent || !vdev)
-		return;
-
-	video_unregister_device(vdev);
-	icd->vdev = NULL;
+	ici->ops->remove(icd);
 }
 EXPORT_SYMBOL(soc_camera_video_stop);
 
-#ifdef CONFIG_I2C_BOARDINFO
-static int soc_camera_init_i2c(struct platform_device *pdev,
-			       struct soc_camera_link *icl)
+static int __devinit soc_camera_pdrv_probe(struct platform_device *pdev)
 {
-	struct i2c_client *client;
-	struct i2c_adapter *adap = i2c_get_adapter(icl->i2c_adapter_id);
+	struct soc_camera_link *icl = pdev->dev.platform_data;
+	struct soc_camera_device *icd;
 	int ret;
 
-	if (!adap) {
-		ret = -ENODEV;
-		dev_err(&pdev->dev, "Cannot get adapter #%d. No driver?\n",
-			icl->i2c_adapter_id);
-		goto ei2cga;
-	}
+	if (!icl)
+		return -EINVAL;
 
-	icl->board_info->platform_data = icl;
-	client = i2c_new_device(adap, icl->board_info);
-	if (!client) {
-		ret = -ENOMEM;
-		goto ei2cnd;
-	}
+	icd = kzalloc(sizeof(*icd), GFP_KERNEL);
+	if (!icd)
+		return -ENOMEM;
 
-	platform_set_drvdata(pdev, client);
+	icd->iface = icl->bus_id;
+	platform_set_drvdata(pdev, icd);
+	icd->dev.platform_data = icl;
 
-	return 0;
-ei2cnd:
-	i2c_put_adapter(adap);
-ei2cga:
-	return ret;
-}
+	ret = soc_camera_device_register(icd);
+	if (ret < 0)
+		goto escdevreg;
 
-static void soc_camera_free_i2c(struct platform_device *pdev)
-{
-	struct i2c_client *client = platform_get_drvdata(pdev);
+	return 0;
 
-	if (!client)
-		return;
+escdevreg:
+	kfree(icd);
 
-	i2c_unregister_device(client);
-	i2c_put_adapter(client->adapter);
+	return ret;
 }
-#else
-#define soc_camera_init_i2c(d, icl)	(-ENODEV)
-#define soc_camera_free_i2c(d)		do {} while (0)
-#endif
 
-static int __devinit soc_camera_pdrv_probe(struct platform_device *pdev)
+/* Only called on rmmod for each platform device, since they are not
+ * hot-pluggable. Now we know, that all our users - hosts and devices have
+ * been unloaded already */
+static int __devexit soc_camera_pdrv_remove(struct platform_device *pdev)
 {
-	struct soc_camera_link *icl = pdev->dev.platform_data;
+	struct soc_camera_device *icd = platform_get_drvdata(pdev);
 
-	if (!icl)
+	if (!icd)
 		return -EINVAL;
 
-	if (icl->board_info)
-		return soc_camera_init_i2c(pdev, icl);
-	else if (!icl->add_device || !icl->del_device)
-		return -EINVAL;
+	soc_camera_device_unregister(icd);
 
-	/* &pdev->dev will become &icd->dev */
-	return icl->add_device(icl, &pdev->dev);
-}
+	kfree(icd);
 
-static int __devexit soc_camera_pdrv_remove(struct platform_device *pdev)
-{
-	struct soc_camera_link *icl = pdev->dev.platform_data;
-
-	if (icl->board_info)
-		soc_camera_free_i2c(pdev);
-	else
-		icl->del_device(icl);
 	return 0;
 }
 
 static struct platform_driver __refdata soc_camera_pdrv = {
-	.probe	= soc_camera_pdrv_probe,
-	.remove	= __devexit_p(soc_camera_pdrv_remove),
-	.driver	= {
-		.name = "soc-camera-pdrv",
-		.owner = THIS_MODULE,
+	.remove  = __devexit_p(soc_camera_pdrv_remove),
+	.driver  = {
+		.name	= "soc-camera-pdrv",
+		.owner	= THIS_MODULE,
 	},
 };
 
@@ -1256,7 +1249,7 @@ static int __init soc_camera_init(void)
 	if (ret)
 		goto edrvr;
 
-	ret = platform_driver_register(&soc_camera_pdrv);
+	ret = platform_driver_probe(&soc_camera_pdrv, soc_camera_pdrv_probe);
 	if (ret)
 		goto epdr;
 
diff --git a/drivers/media/video/soc_camera_platform.c b/drivers/media/video/soc_camera_platform.c
index c48676356ab..d84c134f8d5 100644
--- a/drivers/media/video/soc_camera_platform.c
+++ b/drivers/media/video/soc_camera_platform.c
@@ -21,35 +21,32 @@
 #include <media/soc_camera_platform.h>
 
 struct soc_camera_platform_priv {
-	struct soc_camera_platform_info *info;
-	struct soc_camera_device icd;
 	struct soc_camera_data_format format;
 };
 
 static struct soc_camera_platform_info *
 soc_camera_platform_get_info(struct soc_camera_device *icd)
 {
-	struct soc_camera_platform_priv *priv;
-	priv = container_of(icd, struct soc_camera_platform_priv, icd);
-	return priv->info;
+	struct platform_device *pdev = to_platform_device(dev_get_drvdata(&icd->dev));
+	return pdev->dev.platform_data;
 }
 
 static int soc_camera_platform_init(struct soc_camera_device *icd)
 {
-	struct soc_camera_platform_info *p = soc_camera_platform_get_info(icd);
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
 
-	if (p->power)
-		p->power(1);
+	if (icl->power)
+		icl->power(dev_get_drvdata(&icd->dev), 1);
 
 	return 0;
 }
 
 static int soc_camera_platform_release(struct soc_camera_device *icd)
 {
-	struct soc_camera_platform_info *p = soc_camera_platform_get_info(icd);
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
 
-	if (p->power)
-		p->power(0);
+	if (icl->power)
+		icl->power(dev_get_drvdata(&icd->dev), 0);
 
 	return 0;
 }
@@ -102,31 +99,29 @@ static int soc_camera_platform_try_fmt(struct soc_camera_device *icd,
 	return 0;
 }
 
-static int soc_camera_platform_video_probe(struct soc_camera_device *icd)
+static int soc_camera_platform_video_probe(struct soc_camera_device *icd,
+					   struct platform_device *pdev)
 {
-	struct soc_camera_platform_priv *priv;
-	priv = container_of(icd, struct soc_camera_platform_priv, icd);
+	struct soc_camera_platform_priv *priv = platform_get_drvdata(pdev);
+	struct soc_camera_platform_info *p = pdev->dev.platform_data;
+	int ret;
 
-	priv->format.name = priv->info->format_name;
-	priv->format.depth = priv->info->format_depth;
-	priv->format.fourcc = priv->info->format.pixelformat;
-	priv->format.colorspace = priv->info->format.colorspace;
+	priv->format.name = p->format_name;
+	priv->format.depth = p->format_depth;
+	priv->format.fourcc = p->format.pixelformat;
+	priv->format.colorspace = p->format.colorspace;
 
 	icd->formats = &priv->format;
 	icd->num_formats = 1;
 
-	return soc_camera_video_start(icd);
-}
-
-static void soc_camera_platform_video_remove(struct soc_camera_device *icd)
-{
+	/* ..._video_start() does dev_set_drvdata(&icd->dev, &pdev->dev) */
+	ret = soc_camera_video_start(icd, &pdev->dev);
 	soc_camera_video_stop(icd);
+	return ret;
 }
 
 static struct soc_camera_ops soc_camera_platform_ops = {
 	.owner			= THIS_MODULE,
-	.probe			= soc_camera_platform_video_probe,
-	.remove			= soc_camera_platform_video_remove,
 	.init			= soc_camera_platform_init,
 	.release		= soc_camera_platform_release,
 	.start_capture		= soc_camera_platform_start_capture,
@@ -141,11 +136,10 @@ static struct soc_camera_ops soc_camera_platform_ops = {
 static int soc_camera_platform_probe(struct platform_device *pdev)
 {
 	struct soc_camera_platform_priv *priv;
-	struct soc_camera_platform_info *p;
+	struct soc_camera_platform_info *p = pdev->dev.platform_data;
 	struct soc_camera_device *icd;
 	int ret;
 
-	p = pdev->dev.platform_data;
 	if (!p)
 		return -EINVAL;
 
@@ -153,31 +147,40 @@ static int soc_camera_platform_probe(struct platform_device *pdev)
 	if (!priv)
 		return -ENOMEM;
 
-	priv->info = p;
 	platform_set_drvdata(pdev, priv);
 
-	icd = &priv->icd;
+	icd = to_soc_camera_dev(p->dev);
+	if (!icd)
+		goto enoicd;
+
 	icd->ops	= &soc_camera_platform_ops;
-	icd->control	= &pdev->dev;
+	dev_set_drvdata(&icd->dev, &pdev->dev);
 	icd->width_min	= 0;
-	icd->width_max	= priv->info->format.width;
+	icd->width_max	= p->format.width;
 	icd->height_min	= 0;
-	icd->height_max	= priv->info->format.height;
+	icd->height_max	= p->format.height;
 	icd->y_skip_top	= 0;
-	icd->iface	= priv->info->iface;
 
-	ret = soc_camera_device_register(icd);
-	if (ret)
+	ret = soc_camera_platform_video_probe(icd, pdev);
+	if (ret) {
+		icd->ops = NULL;
 		kfree(priv);
+	}
 
 	return ret;
+
+enoicd:
+	kfree(priv);
+	return -EINVAL;
 }
 
 static int soc_camera_platform_remove(struct platform_device *pdev)
 {
 	struct soc_camera_platform_priv *priv = platform_get_drvdata(pdev);
+	struct soc_camera_platform_info *p = pdev->dev.platform_data;
+	struct soc_camera_device *icd = to_soc_camera_dev(p->dev);
 
-	soc_camera_device_unregister(&priv->icd);
+	icd->ops = NULL;
 	kfree(priv);
 	return 0;
 }
@@ -206,3 +209,4 @@ module_exit(soc_camera_platform_module_exit);
 MODULE_DESCRIPTION("SoC Camera Platform driver");
 MODULE_AUTHOR("Magnus Damm");
 MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:soc_camera_platform");
diff --git a/drivers/media/video/tw9910.c b/drivers/media/video/tw9910.c
index aa5065ea09e..d780a509faa 100644
--- a/drivers/media/video/tw9910.c
+++ b/drivers/media/video/tw9910.c
@@ -224,8 +224,6 @@ struct tw9910_hsync_ctrl {
 
 struct tw9910_priv {
 	struct tw9910_video_info       *info;
-	struct i2c_client              *client;
-	struct soc_camera_device        icd;
 	const struct tw9910_scale_ctrl *scale;
 };
 
@@ -511,35 +509,38 @@ tw9910_select_norm(struct soc_camera_device *icd, u32 width, u32 height)
  */
 static int tw9910_init(struct soc_camera_device *icd)
 {
-	struct tw9910_priv *priv = container_of(icd, struct tw9910_priv, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
 	int ret = 0;
 
-	if (priv->info->link.power) {
-		ret = priv->info->link.power(&priv->client->dev, 1);
+	if (icl->power) {
+		ret = icl->power(&client->dev, 1);
 		if (ret < 0)
 			return ret;
 	}
 
-	if (priv->info->link.reset)
-		ret = priv->info->link.reset(&priv->client->dev);
+	if (icl->reset)
+		ret = icl->reset(&client->dev);
 
 	return ret;
 }
 
 static int tw9910_release(struct soc_camera_device *icd)
 {
-	struct tw9910_priv *priv = container_of(icd, struct tw9910_priv, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
 	int ret = 0;
 
-	if (priv->info->link.power)
-		ret = priv->info->link.power(&priv->client->dev, 0);
+	if (icl->power)
+		ret = icl->power(&client->dev, 0);
 
 	return ret;
 }
 
 static int tw9910_start_capture(struct soc_camera_device *icd)
 {
-	struct tw9910_priv *priv = container_of(icd, struct tw9910_priv, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct tw9910_priv *priv = i2c_get_clientdata(client);
 
 	if (!priv->scale) {
 		dev_err(&icd->dev, "norm select error\n");
@@ -567,8 +568,9 @@ static int tw9910_set_bus_param(struct soc_camera_device *icd,
 
 static unsigned long tw9910_query_bus_param(struct soc_camera_device *icd)
 {
-	struct tw9910_priv *priv = container_of(icd, struct tw9910_priv, icd);
-	struct soc_camera_link *icl = priv->client->dev.platform_data;
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct tw9910_priv *priv = i2c_get_clientdata(client);
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
 	unsigned long flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_MASTER |
 		SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_HIGH |
 		SOCAM_DATA_ACTIVE_HIGH | priv->info->buswidth;
@@ -610,13 +612,13 @@ static int tw9910_enum_input(struct soc_camera_device *icd,
 static int tw9910_get_register(struct soc_camera_device *icd,
 			       struct v4l2_dbg_register *reg)
 {
-	struct tw9910_priv *priv = container_of(icd, struct tw9910_priv, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 	int ret;
 
 	if (reg->reg > 0xff)
 		return -EINVAL;
 
-	ret = i2c_smbus_read_byte_data(priv->client, reg->reg);
+	ret = i2c_smbus_read_byte_data(client, reg->reg);
 	if (ret < 0)
 		return ret;
 
@@ -631,20 +633,21 @@ static int tw9910_get_register(struct soc_camera_device *icd,
 static int tw9910_set_register(struct soc_camera_device *icd,
 			       struct v4l2_dbg_register *reg)
 {
-	struct tw9910_priv *priv = container_of(icd, struct tw9910_priv, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 
 	if (reg->reg > 0xff ||
 	    reg->val > 0xff)
 		return -EINVAL;
 
-	return i2c_smbus_write_byte_data(priv->client, reg->reg, reg->val);
+	return i2c_smbus_write_byte_data(client, reg->reg, reg->val);
 }
 #endif
 
 static int tw9910_set_crop(struct soc_camera_device *icd,
 			   struct v4l2_rect *rect)
 {
-	struct tw9910_priv *priv = container_of(icd, struct tw9910_priv, icd);
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct tw9910_priv *priv = i2c_get_clientdata(client);
 	int                 ret  = -EINVAL;
 	u8                  val;
 
@@ -658,8 +661,8 @@ static int tw9910_set_crop(struct soc_camera_device *icd,
 	/*
 	 * reset hardware
 	 */
-	tw9910_reset(priv->client);
-	ret = tw9910_write_array(priv->client, tw9910_default_regs);
+	tw9910_reset(client);
+	ret = tw9910_write_array(client, tw9910_default_regs);
 	if (ret < 0)
 		goto tw9910_set_fmt_error;
 
@@ -670,7 +673,7 @@ static int tw9910_set_crop(struct soc_camera_device *icd,
 	if (SOCAM_DATAWIDTH_16 == priv->info->buswidth)
 		val = LEN;
 
-	ret = tw9910_mask_set(priv->client, OPFORM, LEN, val);
+	ret = tw9910_mask_set(client, OPFORM, LEN, val);
 	if (ret < 0)
 		goto tw9910_set_fmt_error;
 
@@ -698,28 +701,28 @@ static int tw9910_set_crop(struct soc_camera_device *icd,
 		val = 0;
 	}
 
-	ret = tw9910_mask_set(priv->client, VBICNTL, RTSEL_MASK, val);
+	ret = tw9910_mask_set(client, VBICNTL, RTSEL_MASK, val);
 	if (ret < 0)
 		goto tw9910_set_fmt_error;
 
 	/*
 	 * set scale
 	 */
-	ret = tw9910_set_scale(priv->client, priv->scale);
+	ret = tw9910_set_scale(client, priv->scale);
 	if (ret < 0)
 		goto tw9910_set_fmt_error;
 
 	/*
 	 * set cropping
 	 */
-	ret = tw9910_set_cropping(priv->client, &tw9910_cropping_ctrl);
+	ret = tw9910_set_cropping(client, &tw9910_cropping_ctrl);
 	if (ret < 0)
 		goto tw9910_set_fmt_error;
 
 	/*
 	 * set hsync
 	 */
-	ret = tw9910_set_hsync(priv->client, &tw9910_hsync_ctrl);
+	ret = tw9910_set_hsync(client, &tw9910_hsync_ctrl);
 	if (ret < 0)
 		goto tw9910_set_fmt_error;
 
@@ -727,7 +730,7 @@ static int tw9910_set_crop(struct soc_camera_device *icd,
 
 tw9910_set_fmt_error:
 
-	tw9910_reset(priv->client);
+	tw9910_reset(client);
 	priv->scale = NULL;
 
 	return ret;
@@ -784,9 +787,10 @@ static int tw9910_try_fmt(struct soc_camera_device *icd,
 	return 0;
 }
 
-static int tw9910_video_probe(struct soc_camera_device *icd)
+static int tw9910_video_probe(struct soc_camera_device *icd,
+			      struct i2c_client *client)
 {
-	struct tw9910_priv *priv = container_of(icd, struct tw9910_priv, icd);
+	struct tw9910_priv *priv = i2c_get_clientdata(client);
 	s32 val;
 	int ret;
 
@@ -810,10 +814,18 @@ static int tw9910_video_probe(struct soc_camera_device *icd)
 	icd->formats     = tw9910_color_fmt;
 	icd->num_formats = ARRAY_SIZE(tw9910_color_fmt);
 
+	/* Switch master clock on */
+	ret = soc_camera_video_start(icd, &client->dev);
+	if (ret)
+		return ret;
+
 	/*
 	 * check and show Product ID
 	 */
-	val = i2c_smbus_read_byte_data(priv->client, ID);
+	val = i2c_smbus_read_byte_data(client, ID);
+
+	soc_camera_video_stop(icd);
+
 	if (0x0B != GET_ID(val) ||
 	    0x00 != GET_ReV(val)) {
 		dev_err(&icd->dev,
@@ -824,25 +836,14 @@ static int tw9910_video_probe(struct soc_camera_device *icd)
 	dev_info(&icd->dev,
 		 "tw9910 Product ID %0x:%0x\n", GET_ID(val), GET_ReV(val));
 
-	ret = soc_camera_video_start(icd);
-	if (ret < 0)
-		return ret;
-
 	icd->vdev->tvnorms      = V4L2_STD_NTSC | V4L2_STD_PAL;
 	icd->vdev->current_norm = V4L2_STD_NTSC;
 
 	return ret;
 }
 
-static void tw9910_video_remove(struct soc_camera_device *icd)
-{
-	soc_camera_video_stop(icd);
-}
-
 static struct soc_camera_ops tw9910_ops = {
 	.owner			= THIS_MODULE,
-	.probe			= tw9910_video_probe,
-	.remove			= tw9910_video_remove,
 	.init			= tw9910_init,
 	.release		= tw9910_release,
 	.start_capture		= tw9910_start_capture,
@@ -871,18 +872,25 @@ static int tw9910_probe(struct i2c_client *client,
 {
 	struct tw9910_priv             *priv;
 	struct tw9910_video_info       *info;
-	struct soc_camera_device       *icd;
+	struct soc_camera_device       *icd = client->dev.platform_data;
+	struct i2c_adapter             *adapter =
+		to_i2c_adapter(client->dev.parent);
+	struct soc_camera_link         *icl;
 	const struct tw9910_scale_ctrl *scale;
 	int                             i, ret;
 
-	if (!client->dev.platform_data)
+	if (!icd) {
+		dev_err(&client->dev, "TW9910: missing soc-camera data!\n");
 		return -EINVAL;
+	}
 
-	info = container_of(client->dev.platform_data,
-			    struct tw9910_video_info, link);
+	icl = to_soc_camera_link(icd);
+	if (!icl)
+		return -EINVAL;
 
-	if (!i2c_check_functionality(to_i2c_adapter(client->dev.parent),
-				     I2C_FUNC_SMBUS_BYTE_DATA)) {
+	info = container_of(icl, struct tw9910_video_info, link);
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
 		dev_err(&client->dev,
 			"I2C-Adapter doesn't support "
 			"I2C_FUNC_SMBUS_BYTE_DATA\n");
@@ -894,12 +902,9 @@ static int tw9910_probe(struct i2c_client *client,
 		return -ENOMEM;
 
 	priv->info   = info;
-	priv->client = client;
 	i2c_set_clientdata(client, priv);
 
-	icd          = &priv->icd;
 	icd->ops     = &tw9910_ops;
-	icd->control = &client->dev;
 	icd->iface   = info->link.bus_id;
 
 	/*
@@ -925,9 +930,9 @@ static int tw9910_probe(struct i2c_client *client,
 		icd->height_min = min(scale[i].height, icd->height_min);
 	}
 
-	ret = soc_camera_device_register(icd);
-
+	ret = tw9910_video_probe(icd, client);
 	if (ret) {
+		icd->ops = NULL;
 		i2c_set_clientdata(client, NULL);
 		kfree(priv);
 	}
@@ -938,8 +943,9 @@ static int tw9910_probe(struct i2c_client *client,
 static int tw9910_remove(struct i2c_client *client)
 {
 	struct tw9910_priv *priv = i2c_get_clientdata(client);
+	struct soc_camera_device *icd = client->dev.platform_data;
 
-	soc_camera_device_unregister(&priv->icd);
+	icd->ops = NULL;
 	i2c_set_clientdata(client, NULL);
 	kfree(priv);
 	return 0;
-- 
cgit v1.2.3


From 979ea1ddf80ac7383acdea03471355ca62702539 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 25 Aug 2009 11:43:33 -0300
Subject: V4L/DVB (12510): soc-camera: (partially) convert to v4l2-(sub)dev API

Convert the soc-camera framework to use the v4l2-(sub)dev API. Start using
v4l2-subdev operations. Only a part of the interface between the
soc_camera core, soc_camera host drivers on one side and soc_camera device
drivers on the other side is replaced so far. The rest of the interface
will be replaced in incremental steps, and will require extensions and,
possibly, modifications to the v4l2-subdev code.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/mt9m001.c              | 157 +++++++--------
 drivers/media/video/mt9m111.c              | 309 ++++++++++++-----------------
 drivers/media/video/mt9t031.c              | 173 ++++++++--------
 drivers/media/video/mt9v022.c              | 167 +++++++---------
 drivers/media/video/mx1_camera.c           |  31 ++-
 drivers/media/video/mx3_camera.c           |  54 ++---
 drivers/media/video/ov772x.c               | 169 +++++++---------
 drivers/media/video/pxa_camera.c           | 107 +++++-----
 drivers/media/video/sh_mobile_ceu_camera.c |  45 ++---
 drivers/media/video/soc_camera.c           | 250 +++++++++++++----------
 drivers/media/video/soc_camera_platform.c  | 115 +++++------
 drivers/media/video/tw9910.c               | 151 ++++++--------
 12 files changed, 783 insertions(+), 945 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/mt9m001.c b/drivers/media/video/mt9m001.c
index 1e4f269fc08..2a73dac11d3 100644
--- a/drivers/media/video/mt9m001.c
+++ b/drivers/media/video/mt9m001.c
@@ -13,13 +13,13 @@
 #include <linux/i2c.h>
 #include <linux/log2.h>
 
-#include <media/v4l2-common.h>
+#include <media/v4l2-subdev.h>
 #include <media/v4l2-chip-ident.h>
 #include <media/soc_camera.h>
 
 /* mt9m001 i2c address 0x5d
- * The platform has to define i2c_board_info
- * and call i2c_register_board_info() */
+ * The platform has to define ctruct i2c_board_info objects and link to them
+ * from struct soc_camera_link */
 
 /* mt9m001 selected register addresses */
 #define MT9M001_CHIP_VERSION		0x00
@@ -69,10 +69,16 @@ static const struct soc_camera_data_format mt9m001_monochrome_formats[] = {
 };
 
 struct mt9m001 {
+	struct v4l2_subdev subdev;
 	int model;	/* V4L2_IDENT_MT9M001* codes from v4l2-chip-ident.h */
 	unsigned char autoexposure;
 };
 
+static struct mt9m001 *to_mt9m001(const struct i2c_client *client)
+{
+	return container_of(i2c_get_clientdata(client), struct mt9m001, subdev);
+}
+
 static int reg_read(struct i2c_client *client, const u8 reg)
 {
 	s32 data = i2c_smbus_read_word_data(client, reg);
@@ -110,32 +116,18 @@ static int reg_clear(struct i2c_client *client, const u8 reg,
 static int mt9m001_init(struct soc_camera_device *icd)
 {
 	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
 	int ret;
 
 	dev_dbg(&icd->dev, "%s\n", __func__);
 
-	if (icl->power) {
-		ret = icl->power(&client->dev, 1);
-		if (ret < 0) {
-			dev_err(icd->vdev->parent,
-				"Platform failed to power-on the camera.\n");
-			return ret;
-		}
-	}
-
-	/* The camera could have been already on, we reset it additionally */
-	if (icl->reset)
-		ret = icl->reset(&client->dev);
-	else
-		ret = -ENODEV;
+	/*
+	 * We don't know, whether platform provides reset,
+	 * issue a soft reset too
+	 */
+	ret = reg_write(client, MT9M001_RESET, 1);
+	if (!ret)
+		ret = reg_write(client, MT9M001_RESET, 0);
 
-	if (ret < 0) {
-		/* Either no platform reset, or platform reset failed */
-		ret = reg_write(client, MT9M001_RESET, 1);
-		if (!ret)
-			ret = reg_write(client, MT9M001_RESET, 0);
-	}
 	/* Disable chip, synchronous option update */
 	if (!ret)
 		ret = reg_write(client, MT9M001_OUTPUT_CONTROL, 0);
@@ -146,33 +138,19 @@ static int mt9m001_init(struct soc_camera_device *icd)
 static int mt9m001_release(struct soc_camera_device *icd)
 {
 	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
 
 	/* Disable the chip */
 	reg_write(client, MT9M001_OUTPUT_CONTROL, 0);
 
-	if (icl->power)
-		icl->power(&client->dev, 0);
-
 	return 0;
 }
 
-static int mt9m001_start_capture(struct soc_camera_device *icd)
+static int mt9m001_s_stream(struct v4l2_subdev *sd, int enable)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct i2c_client *client = sd->priv;
 
-	/* Switch to master "normal" mode */
-	if (reg_write(client, MT9M001_OUTPUT_CONTROL, 2) < 0)
-		return -EIO;
-	return 0;
-}
-
-static int mt9m001_stop_capture(struct soc_camera_device *icd)
-{
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-
-	/* Stop sensor readout */
-	if (reg_write(client, MT9M001_OUTPUT_CONTROL, 0) < 0)
+	/* Switch to master "normal" mode or stop sensor readout */
+	if (reg_write(client, MT9M001_OUTPUT_CONTROL, enable ? 2 : 0) < 0)
 		return -EIO;
 	return 0;
 }
@@ -220,7 +198,7 @@ static int mt9m001_set_crop(struct soc_camera_device *icd,
 			    struct v4l2_rect *rect)
 {
 	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9m001 *mt9m001 = i2c_get_clientdata(client);
+	struct mt9m001 *mt9m001 = to_mt9m001(client);
 	int ret;
 	const u16 hblank = 9, vblank = 25;
 
@@ -257,9 +235,10 @@ static int mt9m001_set_crop(struct soc_camera_device *icd,
 	return ret;
 }
 
-static int mt9m001_set_fmt(struct soc_camera_device *icd,
-			   struct v4l2_format *f)
+static int mt9m001_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
 {
+	struct i2c_client *client = sd->priv;
+	struct soc_camera_device *icd = client->dev.platform_data;
 	struct v4l2_rect rect = {
 		.left	= icd->x_current,
 		.top	= icd->y_current,
@@ -271,9 +250,10 @@ static int mt9m001_set_fmt(struct soc_camera_device *icd,
 	return mt9m001_set_crop(icd, &rect);
 }
 
-static int mt9m001_try_fmt(struct soc_camera_device *icd,
-			   struct v4l2_format *f)
+static int mt9m001_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
 {
+	struct i2c_client *client = sd->priv;
+	struct soc_camera_device *icd = client->dev.platform_data;
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 
 	v4l_bound_align_image(&pix->width, 48, 1280, 1,
@@ -283,11 +263,11 @@ static int mt9m001_try_fmt(struct soc_camera_device *icd,
 	return 0;
 }
 
-static int mt9m001_get_chip_id(struct soc_camera_device *icd,
-			       struct v4l2_dbg_chip_ident *id)
+static int mt9m001_g_chip_ident(struct v4l2_subdev *sd,
+				struct v4l2_dbg_chip_ident *id)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9m001 *mt9m001 = i2c_get_clientdata(client);
+	struct i2c_client *client = sd->priv;
+	struct mt9m001 *mt9m001 = to_mt9m001(client);
 
 	if (id->match.type != V4L2_CHIP_MATCH_I2C_ADDR)
 		return -EINVAL;
@@ -302,10 +282,10 @@ static int mt9m001_get_chip_id(struct soc_camera_device *icd,
 }
 
 #ifdef CONFIG_VIDEO_ADV_DEBUG
-static int mt9m001_get_register(struct soc_camera_device *icd,
-				struct v4l2_dbg_register *reg)
+static int mt9m001_g_register(struct v4l2_subdev *sd,
+			      struct v4l2_dbg_register *reg)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct i2c_client *client = sd->priv;
 
 	if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff)
 		return -EINVAL;
@@ -322,10 +302,10 @@ static int mt9m001_get_register(struct soc_camera_device *icd,
 	return 0;
 }
 
-static int mt9m001_set_register(struct soc_camera_device *icd,
-				struct v4l2_dbg_register *reg)
+static int mt9m001_s_register(struct v4l2_subdev *sd,
+			      struct v4l2_dbg_register *reg)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct i2c_client *client = sd->priv;
 
 	if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff)
 		return -EINVAL;
@@ -378,35 +358,20 @@ static const struct v4l2_queryctrl mt9m001_controls[] = {
 	}
 };
 
-static int mt9m001_get_control(struct soc_camera_device *, struct v4l2_control *);
-static int mt9m001_set_control(struct soc_camera_device *, struct v4l2_control *);
-
 static struct soc_camera_ops mt9m001_ops = {
-	.owner			= THIS_MODULE,
 	.init			= mt9m001_init,
 	.release		= mt9m001_release,
-	.start_capture		= mt9m001_start_capture,
-	.stop_capture		= mt9m001_stop_capture,
 	.set_crop		= mt9m001_set_crop,
-	.set_fmt		= mt9m001_set_fmt,
-	.try_fmt		= mt9m001_try_fmt,
 	.set_bus_param		= mt9m001_set_bus_param,
 	.query_bus_param	= mt9m001_query_bus_param,
 	.controls		= mt9m001_controls,
 	.num_controls		= ARRAY_SIZE(mt9m001_controls),
-	.get_control		= mt9m001_get_control,
-	.set_control		= mt9m001_set_control,
-	.get_chip_id		= mt9m001_get_chip_id,
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.get_register		= mt9m001_get_register,
-	.set_register		= mt9m001_set_register,
-#endif
 };
 
-static int mt9m001_get_control(struct soc_camera_device *icd, struct v4l2_control *ctrl)
+static int mt9m001_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9m001 *mt9m001 = i2c_get_clientdata(client);
+	struct i2c_client *client = sd->priv;
+	struct mt9m001 *mt9m001 = to_mt9m001(client);
 	int data;
 
 	switch (ctrl->id) {
@@ -423,10 +388,11 @@ static int mt9m001_get_control(struct soc_camera_device *icd, struct v4l2_contro
 	return 0;
 }
 
-static int mt9m001_set_control(struct soc_camera_device *icd, struct v4l2_control *ctrl)
+static int mt9m001_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9m001 *mt9m001 = i2c_get_clientdata(client);
+	struct i2c_client *client = sd->priv;
+	struct mt9m001 *mt9m001 = to_mt9m001(client);
+	struct soc_camera_device *icd = client->dev.platform_data;
 	const struct v4l2_queryctrl *qctrl;
 	int data;
 
@@ -521,10 +487,9 @@ static int mt9m001_set_control(struct soc_camera_device *icd, struct v4l2_contro
 static int mt9m001_video_probe(struct soc_camera_device *icd,
 			       struct i2c_client *client)
 {
-	struct mt9m001 *mt9m001 = i2c_get_clientdata(client);
+	struct mt9m001 *mt9m001 = to_mt9m001(client);
 	struct soc_camera_link *icl = to_soc_camera_link(icd);
 	s32 data;
-	int ret;
 	unsigned long flags;
 
 	/* We must have a parent by now. And it cannot be a wrong one.
@@ -533,11 +498,6 @@ static int mt9m001_video_probe(struct soc_camera_device *icd,
 	    to_soc_camera_host(icd->dev.parent)->nr != icd->iface)
 		return -ENODEV;
 
-	/* Switch master clock on */
-	ret = soc_camera_video_start(icd, &client->dev);
-	if (ret)
-		return ret;
-
 	/* Enable the chip */
 	data = reg_write(client, MT9M001_CHIP_ENABLE, 1);
 	dev_dbg(&icd->dev, "write: %d\n", data);
@@ -545,8 +505,6 @@ static int mt9m001_video_probe(struct soc_camera_device *icd,
 	/* Read out the chip version register */
 	data = reg_read(client, MT9M001_CHIP_VERSION);
 
-	soc_camera_video_stop(icd);
-
 	/* must be 0x8411 or 0x8421 for colour sensor and 8431 for bw */
 	switch (data) {
 	case 0x8411:
@@ -601,6 +559,27 @@ static void mt9m001_video_remove(struct soc_camera_device *icd)
 		icl->free_bus(icl);
 }
 
+static struct v4l2_subdev_core_ops mt9m001_subdev_core_ops = {
+	.g_ctrl		= mt9m001_g_ctrl,
+	.s_ctrl		= mt9m001_s_ctrl,
+	.g_chip_ident	= mt9m001_g_chip_ident,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.g_register	= mt9m001_g_register,
+	.s_register	= mt9m001_s_register,
+#endif
+};
+
+static struct v4l2_subdev_video_ops mt9m001_subdev_video_ops = {
+	.s_stream	= mt9m001_s_stream,
+	.s_fmt		= mt9m001_s_fmt,
+	.try_fmt	= mt9m001_try_fmt,
+};
+
+static struct v4l2_subdev_ops mt9m001_subdev_ops = {
+	.core	= &mt9m001_subdev_core_ops,
+	.video	= &mt9m001_subdev_video_ops,
+};
+
 static int mt9m001_probe(struct i2c_client *client,
 			 const struct i2c_device_id *did)
 {
@@ -631,7 +610,7 @@ static int mt9m001_probe(struct i2c_client *client,
 	if (!mt9m001)
 		return -ENOMEM;
 
-	i2c_set_clientdata(client, mt9m001);
+	v4l2_i2c_subdev_init(&mt9m001->subdev, client, &mt9m001_subdev_ops);
 
 	/* Second stage probe - when a capture adapter is there */
 	icd->ops	= &mt9m001_ops;
@@ -660,7 +639,7 @@ static int mt9m001_probe(struct i2c_client *client,
 
 static int mt9m001_remove(struct i2c_client *client)
 {
-	struct mt9m001 *mt9m001 = i2c_get_clientdata(client);
+	struct mt9m001 *mt9m001 = to_mt9m001(client);
 	struct soc_camera_device *icd = client->dev.platform_data;
 
 	icd->ops = NULL;
diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c
index 95c2f089605..29f976afd46 100644
--- a/drivers/media/video/mt9m111.c
+++ b/drivers/media/video/mt9m111.c
@@ -148,6 +148,7 @@ enum mt9m111_context {
 };
 
 struct mt9m111 {
+	struct v4l2_subdev subdev;
 	int model;	/* V4L2_IDENT_MT9M11x* codes from v4l2-chip-ident.h */
 	enum mt9m111_context context;
 	struct v4l2_rect rect;
@@ -164,6 +165,11 @@ struct mt9m111 {
 	unsigned int autowhitebalance:1;
 };
 
+static struct mt9m111 *to_mt9m111(const struct i2c_client *client)
+{
+	return container_of(i2c_get_clientdata(client), struct mt9m111, subdev);
+}
+
 static int reg_page_map_set(struct i2c_client *client, const u16 reg)
 {
 	int ret;
@@ -227,10 +233,9 @@ static int mt9m111_reg_clear(struct i2c_client *client, const u16 reg,
 	return mt9m111_reg_write(client, reg, ret & ~data);
 }
 
-static int mt9m111_set_context(struct soc_camera_device *icd,
+static int mt9m111_set_context(struct i2c_client *client,
 			       enum mt9m111_context ctxt)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 	int valB = MT9M111_CTXT_CTRL_RESTART | MT9M111_CTXT_CTRL_DEFECTCOR_B
 		| MT9M111_CTXT_CTRL_RESIZE_B | MT9M111_CTXT_CTRL_CTRL2_B
 		| MT9M111_CTXT_CTRL_GAMMA_B | MT9M111_CTXT_CTRL_READ_MODE_B
@@ -244,11 +249,10 @@ static int mt9m111_set_context(struct soc_camera_device *icd,
 		return reg_write(CONTEXT_CONTROL, valA);
 }
 
-static int mt9m111_setup_rect(struct soc_camera_device *icd,
+static int mt9m111_setup_rect(struct i2c_client *client,
 			      struct v4l2_rect *rect)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9m111 *mt9m111 = i2c_get_clientdata(client);
+	struct mt9m111 *mt9m111 = to_mt9m111(client);
 	int ret, is_raw_format;
 	int width = rect->width;
 	int height = rect->height;
@@ -290,9 +294,8 @@ static int mt9m111_setup_rect(struct soc_camera_device *icd,
 	return ret;
 }
 
-static int mt9m111_setup_pixfmt(struct soc_camera_device *icd, u16 outfmt)
+static int mt9m111_setup_pixfmt(struct i2c_client *client, u16 outfmt)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 	int ret;
 
 	ret = reg_write(OUTPUT_FORMAT_CTRL2_A, outfmt);
@@ -301,20 +304,19 @@ static int mt9m111_setup_pixfmt(struct soc_camera_device *icd, u16 outfmt)
 	return ret;
 }
 
-static int mt9m111_setfmt_bayer8(struct soc_camera_device *icd)
+static int mt9m111_setfmt_bayer8(struct i2c_client *client)
 {
-	return mt9m111_setup_pixfmt(icd, MT9M111_OUTFMT_PROCESSED_BAYER);
+	return mt9m111_setup_pixfmt(client, MT9M111_OUTFMT_PROCESSED_BAYER);
 }
 
-static int mt9m111_setfmt_bayer10(struct soc_camera_device *icd)
+static int mt9m111_setfmt_bayer10(struct i2c_client *client)
 {
-	return mt9m111_setup_pixfmt(icd, MT9M111_OUTFMT_BYPASS_IFP);
+	return mt9m111_setup_pixfmt(client, MT9M111_OUTFMT_BYPASS_IFP);
 }
 
-static int mt9m111_setfmt_rgb565(struct soc_camera_device *icd)
+static int mt9m111_setfmt_rgb565(struct i2c_client *client)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9m111 *mt9m111 = i2c_get_clientdata(client);
+	struct mt9m111 *mt9m111 = to_mt9m111(client);
 	int val = 0;
 
 	if (mt9m111->swap_rgb_red_blue)
@@ -323,13 +325,12 @@ static int mt9m111_setfmt_rgb565(struct soc_camera_device *icd)
 		val |= MT9M111_OUTFMT_SWAP_RGB_EVEN;
 	val |= MT9M111_OUTFMT_RGB | MT9M111_OUTFMT_RGB565;
 
-	return mt9m111_setup_pixfmt(icd, val);
+	return mt9m111_setup_pixfmt(client, val);
 }
 
-static int mt9m111_setfmt_rgb555(struct soc_camera_device *icd)
+static int mt9m111_setfmt_rgb555(struct i2c_client *client)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9m111 *mt9m111 = i2c_get_clientdata(client);
+	struct mt9m111 *mt9m111 = to_mt9m111(client);
 	int val = 0;
 
 	if (mt9m111->swap_rgb_red_blue)
@@ -338,13 +339,12 @@ static int mt9m111_setfmt_rgb555(struct soc_camera_device *icd)
 		val |= MT9M111_OUTFMT_SWAP_RGB_EVEN;
 	val |= MT9M111_OUTFMT_RGB | MT9M111_OUTFMT_RGB555;
 
-	return mt9m111_setup_pixfmt(icd, val);
+	return mt9m111_setup_pixfmt(client, val);
 }
 
-static int mt9m111_setfmt_yuv(struct soc_camera_device *icd)
+static int mt9m111_setfmt_yuv(struct i2c_client *client)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9m111 *mt9m111 = i2c_get_clientdata(client);
+	struct mt9m111 *mt9m111 = to_mt9m111(client);
 	int val = 0;
 
 	if (mt9m111->swap_yuv_cb_cr)
@@ -352,52 +352,22 @@ static int mt9m111_setfmt_yuv(struct soc_camera_device *icd)
 	if (mt9m111->swap_yuv_y_chromas)
 		val |= MT9M111_OUTFMT_SWAP_YCbCr_C_Y;
 
-	return mt9m111_setup_pixfmt(icd, val);
+	return mt9m111_setup_pixfmt(client, val);
 }
 
-static int mt9m111_enable(struct soc_camera_device *icd)
+static int mt9m111_enable(struct i2c_client *client)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
-	struct mt9m111 *mt9m111 = i2c_get_clientdata(client);
+	struct mt9m111 *mt9m111 = to_mt9m111(client);
 	int ret;
 
-	if (icl->power) {
-		ret = icl->power(&client->dev, 1);
-		if (ret < 0) {
-			dev_err(icd->vdev->parent,
-				"Platform failed to power-on the camera.\n");
-			return ret;
-		}
-	}
-
 	ret = reg_set(RESET, MT9M111_RESET_CHIP_ENABLE);
 	if (!ret)
 		mt9m111->powered = 1;
 	return ret;
 }
 
-static int mt9m111_disable(struct soc_camera_device *icd)
-{
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
-	struct mt9m111 *mt9m111 = i2c_get_clientdata(client);
-	int ret;
-
-	ret = reg_clear(RESET, MT9M111_RESET_CHIP_ENABLE);
-	if (!ret)
-		mt9m111->powered = 0;
-
-	if (icl->power)
-		icl->power(&client->dev, 0);
-
-	return ret;
-}
-
-static int mt9m111_reset(struct soc_camera_device *icd)
+static int mt9m111_reset(struct i2c_client *client)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
 	int ret;
 
 	ret = reg_set(RESET, MT9M111_RESET_RESET_MODE);
@@ -407,22 +377,9 @@ static int mt9m111_reset(struct soc_camera_device *icd)
 		ret = reg_clear(RESET, MT9M111_RESET_RESET_MODE
 				| MT9M111_RESET_RESET_SOC);
 
-	if (icl->reset)
-		icl->reset(&client->dev);
-
 	return ret;
 }
 
-static int mt9m111_start_capture(struct soc_camera_device *icd)
-{
-	return 0;
-}
-
-static int mt9m111_stop_capture(struct soc_camera_device *icd)
-{
-	return 0;
-}
-
 static unsigned long mt9m111_query_bus_param(struct soc_camera_device *icd)
 {
 	struct soc_camera_link *icl = to_soc_camera_link(icd);
@@ -442,60 +399,59 @@ static int mt9m111_set_crop(struct soc_camera_device *icd,
 			    struct v4l2_rect *rect)
 {
 	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9m111 *mt9m111 = i2c_get_clientdata(client);
+	struct mt9m111 *mt9m111 = to_mt9m111(client);
 	int ret;
 
 	dev_dbg(&icd->dev, "%s left=%d, top=%d, width=%d, height=%d\n",
 		__func__, rect->left, rect->top, rect->width,
 		rect->height);
 
-	ret = mt9m111_setup_rect(icd, rect);
+	ret = mt9m111_setup_rect(client, rect);
 	if (!ret)
 		mt9m111->rect = *rect;
 	return ret;
 }
 
-static int mt9m111_set_pixfmt(struct soc_camera_device *icd, u32 pixfmt)
+static int mt9m111_set_pixfmt(struct i2c_client *client, u32 pixfmt)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9m111 *mt9m111 = i2c_get_clientdata(client);
+	struct mt9m111 *mt9m111 = to_mt9m111(client);
 	int ret;
 
 	switch (pixfmt) {
 	case V4L2_PIX_FMT_SBGGR8:
-		ret = mt9m111_setfmt_bayer8(icd);
+		ret = mt9m111_setfmt_bayer8(client);
 		break;
 	case V4L2_PIX_FMT_SBGGR16:
-		ret = mt9m111_setfmt_bayer10(icd);
+		ret = mt9m111_setfmt_bayer10(client);
 		break;
 	case V4L2_PIX_FMT_RGB555:
-		ret = mt9m111_setfmt_rgb555(icd);
+		ret = mt9m111_setfmt_rgb555(client);
 		break;
 	case V4L2_PIX_FMT_RGB565:
-		ret = mt9m111_setfmt_rgb565(icd);
+		ret = mt9m111_setfmt_rgb565(client);
 		break;
 	case V4L2_PIX_FMT_UYVY:
 		mt9m111->swap_yuv_y_chromas = 0;
 		mt9m111->swap_yuv_cb_cr = 0;
-		ret = mt9m111_setfmt_yuv(icd);
+		ret = mt9m111_setfmt_yuv(client);
 		break;
 	case V4L2_PIX_FMT_VYUY:
 		mt9m111->swap_yuv_y_chromas = 0;
 		mt9m111->swap_yuv_cb_cr = 1;
-		ret = mt9m111_setfmt_yuv(icd);
+		ret = mt9m111_setfmt_yuv(client);
 		break;
 	case V4L2_PIX_FMT_YUYV:
 		mt9m111->swap_yuv_y_chromas = 1;
 		mt9m111->swap_yuv_cb_cr = 0;
-		ret = mt9m111_setfmt_yuv(icd);
+		ret = mt9m111_setfmt_yuv(client);
 		break;
 	case V4L2_PIX_FMT_YVYU:
 		mt9m111->swap_yuv_y_chromas = 1;
 		mt9m111->swap_yuv_cb_cr = 1;
-		ret = mt9m111_setfmt_yuv(icd);
+		ret = mt9m111_setfmt_yuv(client);
 		break;
 	default:
-		dev_err(&icd->dev, "Pixel format not handled : %x\n", pixfmt);
+		dev_err(&client->dev, "Pixel format not handled : %x\n", pixfmt);
 		ret = -EINVAL;
 	}
 
@@ -505,11 +461,10 @@ static int mt9m111_set_pixfmt(struct soc_camera_device *icd, u32 pixfmt)
 	return ret;
 }
 
-static int mt9m111_set_fmt(struct soc_camera_device *icd,
-			   struct v4l2_format *f)
+static int mt9m111_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9m111 *mt9m111 = i2c_get_clientdata(client);
+	struct i2c_client *client = sd->priv;
+	struct mt9m111 *mt9m111 = to_mt9m111(client);
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 	struct v4l2_rect rect = {
 		.left	= mt9m111->rect.left,
@@ -519,20 +474,19 @@ static int mt9m111_set_fmt(struct soc_camera_device *icd,
 	};
 	int ret;
 
-	dev_dbg(&icd->dev, "%s fmt=%x left=%d, top=%d, width=%d, height=%d\n",
+	dev_dbg(&client->dev, "%s fmt=%x left=%d, top=%d, width=%d, height=%d\n",
 		__func__, pix->pixelformat, rect.left, rect.top, rect.width,
 		rect.height);
 
-	ret = mt9m111_setup_rect(icd, &rect);
+	ret = mt9m111_setup_rect(client, &rect);
 	if (!ret)
-		ret = mt9m111_set_pixfmt(icd, pix->pixelformat);
+		ret = mt9m111_set_pixfmt(client, pix->pixelformat);
 	if (!ret)
 		mt9m111->rect = rect;
 	return ret;
 }
 
-static int mt9m111_try_fmt(struct soc_camera_device *icd,
-			   struct v4l2_format *f)
+static int mt9m111_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
 {
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 
@@ -544,11 +498,11 @@ static int mt9m111_try_fmt(struct soc_camera_device *icd,
 	return 0;
 }
 
-static int mt9m111_get_chip_id(struct soc_camera_device *icd,
-			       struct v4l2_dbg_chip_ident *id)
+static int mt9m111_g_chip_ident(struct v4l2_subdev *sd,
+				struct v4l2_dbg_chip_ident *id)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9m111 *mt9m111 = i2c_get_clientdata(client);
+	struct i2c_client *client = sd->priv;
+	struct mt9m111 *mt9m111 = to_mt9m111(client);
 
 	if (id->match.type != V4L2_CHIP_MATCH_I2C_ADDR)
 		return -EINVAL;
@@ -563,10 +517,10 @@ static int mt9m111_get_chip_id(struct soc_camera_device *icd,
 }
 
 #ifdef CONFIG_VIDEO_ADV_DEBUG
-static int mt9m111_get_register(struct soc_camera_device *icd,
-				struct v4l2_dbg_register *reg)
+static int mt9m111_g_register(struct v4l2_subdev *sd,
+			      struct v4l2_dbg_register *reg)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct i2c_client *client = sd->priv;
 	int val;
 
 	if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0x2ff)
@@ -584,10 +538,10 @@ static int mt9m111_get_register(struct soc_camera_device *icd,
 	return 0;
 }
 
-static int mt9m111_set_register(struct soc_camera_device *icd,
-				struct v4l2_dbg_register *reg)
+static int mt9m111_s_register(struct v4l2_subdev *sd,
+			      struct v4l2_dbg_register *reg)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct i2c_client *client = sd->priv;
 
 	if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0x2ff)
 		return -EINVAL;
@@ -639,41 +593,24 @@ static const struct v4l2_queryctrl mt9m111_controls[] = {
 	}
 };
 
-static int mt9m111_get_control(struct soc_camera_device *,
-			       struct v4l2_control *);
-static int mt9m111_set_control(struct soc_camera_device *,
-			       struct v4l2_control *);
 static int mt9m111_resume(struct soc_camera_device *icd);
 static int mt9m111_init(struct soc_camera_device *icd);
 static int mt9m111_release(struct soc_camera_device *icd);
 
 static struct soc_camera_ops mt9m111_ops = {
-	.owner			= THIS_MODULE,
 	.init			= mt9m111_init,
 	.resume			= mt9m111_resume,
 	.release		= mt9m111_release,
-	.start_capture		= mt9m111_start_capture,
-	.stop_capture		= mt9m111_stop_capture,
 	.set_crop		= mt9m111_set_crop,
-	.set_fmt		= mt9m111_set_fmt,
-	.try_fmt		= mt9m111_try_fmt,
 	.query_bus_param	= mt9m111_query_bus_param,
 	.set_bus_param		= mt9m111_set_bus_param,
 	.controls		= mt9m111_controls,
 	.num_controls		= ARRAY_SIZE(mt9m111_controls),
-	.get_control		= mt9m111_get_control,
-	.set_control		= mt9m111_set_control,
-	.get_chip_id		= mt9m111_get_chip_id,
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.get_register		= mt9m111_get_register,
-	.set_register		= mt9m111_set_register,
-#endif
 };
 
-static int mt9m111_set_flip(struct soc_camera_device *icd, int flip, int mask)
+static int mt9m111_set_flip(struct i2c_client *client, int flip, int mask)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9m111 *mt9m111 = i2c_get_clientdata(client);
+	struct mt9m111 *mt9m111 = to_mt9m111(client);
 	int ret;
 
 	if (mt9m111->context == HIGHPOWER) {
@@ -691,9 +628,8 @@ static int mt9m111_set_flip(struct soc_camera_device *icd, int flip, int mask)
 	return ret;
 }
 
-static int mt9m111_get_global_gain(struct soc_camera_device *icd)
+static int mt9m111_get_global_gain(struct i2c_client *client)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 	int data;
 
 	data = reg_read(GLOBAL_GAIN);
@@ -703,9 +639,9 @@ static int mt9m111_get_global_gain(struct soc_camera_device *icd)
 	return data;
 }
 
-static int mt9m111_set_global_gain(struct soc_camera_device *icd, int gain)
+static int mt9m111_set_global_gain(struct i2c_client *client, int gain)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct soc_camera_device *icd = client->dev.platform_data;
 	u16 val;
 
 	if (gain > 63 * 2 * 2)
@@ -722,10 +658,9 @@ static int mt9m111_set_global_gain(struct soc_camera_device *icd, int gain)
 	return reg_write(GLOBAL_GAIN, val);
 }
 
-static int mt9m111_set_autoexposure(struct soc_camera_device *icd, int on)
+static int mt9m111_set_autoexposure(struct i2c_client *client, int on)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9m111 *mt9m111 = i2c_get_clientdata(client);
+	struct mt9m111 *mt9m111 = to_mt9m111(client);
 	int ret;
 
 	if (on)
@@ -739,10 +674,9 @@ static int mt9m111_set_autoexposure(struct soc_camera_device *icd, int on)
 	return ret;
 }
 
-static int mt9m111_set_autowhitebalance(struct soc_camera_device *icd, int on)
+static int mt9m111_set_autowhitebalance(struct i2c_client *client, int on)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9m111 *mt9m111 = i2c_get_clientdata(client);
+	struct mt9m111 *mt9m111 = to_mt9m111(client);
 	int ret;
 
 	if (on)
@@ -756,11 +690,10 @@ static int mt9m111_set_autowhitebalance(struct soc_camera_device *icd, int on)
 	return ret;
 }
 
-static int mt9m111_get_control(struct soc_camera_device *icd,
-			       struct v4l2_control *ctrl)
+static int mt9m111_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9m111 *mt9m111 = i2c_get_clientdata(client);
+	struct i2c_client *client = sd->priv;
+	struct mt9m111 *mt9m111 = to_mt9m111(client);
 	int data;
 
 	switch (ctrl->id) {
@@ -785,7 +718,7 @@ static int mt9m111_get_control(struct soc_camera_device *icd,
 		ctrl->value = !!(data & MT9M111_RMB_MIRROR_COLS);
 		break;
 	case V4L2_CID_GAIN:
-		data = mt9m111_get_global_gain(icd);
+		data = mt9m111_get_global_gain(client);
 		if (data < 0)
 			return data;
 		ctrl->value = data;
@@ -800,38 +733,36 @@ static int mt9m111_get_control(struct soc_camera_device *icd,
 	return 0;
 }
 
-static int mt9m111_set_control(struct soc_camera_device *icd,
-			       struct v4l2_control *ctrl)
+static int mt9m111_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9m111 *mt9m111 = i2c_get_clientdata(client);
+	struct i2c_client *client = sd->priv;
+	struct mt9m111 *mt9m111 = to_mt9m111(client);
 	const struct v4l2_queryctrl *qctrl;
 	int ret;
 
 	qctrl = soc_camera_find_qctrl(&mt9m111_ops, ctrl->id);
-
 	if (!qctrl)
 		return -EINVAL;
 
 	switch (ctrl->id) {
 	case V4L2_CID_VFLIP:
 		mt9m111->vflip = ctrl->value;
-		ret = mt9m111_set_flip(icd, ctrl->value,
+		ret = mt9m111_set_flip(client, ctrl->value,
 					MT9M111_RMB_MIRROR_ROWS);
 		break;
 	case V4L2_CID_HFLIP:
 		mt9m111->hflip = ctrl->value;
-		ret = mt9m111_set_flip(icd, ctrl->value,
+		ret = mt9m111_set_flip(client, ctrl->value,
 					MT9M111_RMB_MIRROR_COLS);
 		break;
 	case V4L2_CID_GAIN:
-		ret = mt9m111_set_global_gain(icd, ctrl->value);
+		ret = mt9m111_set_global_gain(client, ctrl->value);
 		break;
 	case V4L2_CID_EXPOSURE_AUTO:
-		ret =  mt9m111_set_autoexposure(icd, ctrl->value);
+		ret =  mt9m111_set_autoexposure(client, ctrl->value);
 		break;
 	case V4L2_CID_AUTO_WHITE_BALANCE:
-		ret =  mt9m111_set_autowhitebalance(icd, ctrl->value);
+		ret =  mt9m111_set_autowhitebalance(client, ctrl->value);
 		break;
 	default:
 		ret = -EINVAL;
@@ -840,34 +771,34 @@ static int mt9m111_set_control(struct soc_camera_device *icd,
 	return ret;
 }
 
-static int mt9m111_restore_state(struct soc_camera_device *icd)
+static int mt9m111_restore_state(struct i2c_client *client)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9m111 *mt9m111 = i2c_get_clientdata(client);
-
-	mt9m111_set_context(icd, mt9m111->context);
-	mt9m111_set_pixfmt(icd, mt9m111->pixfmt);
-	mt9m111_setup_rect(icd, &mt9m111->rect);
-	mt9m111_set_flip(icd, mt9m111->hflip, MT9M111_RMB_MIRROR_COLS);
-	mt9m111_set_flip(icd, mt9m111->vflip, MT9M111_RMB_MIRROR_ROWS);
-	mt9m111_set_global_gain(icd, icd->gain);
-	mt9m111_set_autoexposure(icd, mt9m111->autoexposure);
-	mt9m111_set_autowhitebalance(icd, mt9m111->autowhitebalance);
+	struct mt9m111 *mt9m111 = to_mt9m111(client);
+	struct soc_camera_device *icd = client->dev.platform_data;
+
+	mt9m111_set_context(client, mt9m111->context);
+	mt9m111_set_pixfmt(client, mt9m111->pixfmt);
+	mt9m111_setup_rect(client, &mt9m111->rect);
+	mt9m111_set_flip(client, mt9m111->hflip, MT9M111_RMB_MIRROR_COLS);
+	mt9m111_set_flip(client, mt9m111->vflip, MT9M111_RMB_MIRROR_ROWS);
+	mt9m111_set_global_gain(client, icd->gain);
+	mt9m111_set_autoexposure(client, mt9m111->autoexposure);
+	mt9m111_set_autowhitebalance(client, mt9m111->autowhitebalance);
 	return 0;
 }
 
 static int mt9m111_resume(struct soc_camera_device *icd)
 {
 	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9m111 *mt9m111 = i2c_get_clientdata(client);
+	struct mt9m111 *mt9m111 = to_mt9m111(client);
 	int ret = 0;
 
 	if (mt9m111->powered) {
-		ret = mt9m111_enable(icd);
+		ret = mt9m111_enable(client);
 		if (!ret)
-			ret = mt9m111_reset(icd);
+			ret = mt9m111_reset(client);
 		if (!ret)
-			ret = mt9m111_restore_state(icd);
+			ret = mt9m111_restore_state(client);
 	}
 	return ret;
 }
@@ -875,17 +806,17 @@ static int mt9m111_resume(struct soc_camera_device *icd)
 static int mt9m111_init(struct soc_camera_device *icd)
 {
 	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9m111 *mt9m111 = i2c_get_clientdata(client);
+	struct mt9m111 *mt9m111 = to_mt9m111(client);
 	int ret;
 
 	mt9m111->context = HIGHPOWER;
-	ret = mt9m111_enable(icd);
+	ret = mt9m111_enable(client);
 	if (!ret)
-		ret = mt9m111_reset(icd);
+		ret = mt9m111_reset(client);
 	if (!ret)
-		ret = mt9m111_set_context(icd, mt9m111->context);
+		ret = mt9m111_set_context(client, mt9m111->context);
 	if (!ret)
-		ret = mt9m111_set_autoexposure(icd, mt9m111->autoexposure);
+		ret = mt9m111_set_autoexposure(client, mt9m111->autoexposure);
 	if (ret)
 		dev_err(&icd->dev, "mt9m11x init failed: %d\n", ret);
 	return ret;
@@ -893,9 +824,14 @@ static int mt9m111_init(struct soc_camera_device *icd)
 
 static int mt9m111_release(struct soc_camera_device *icd)
 {
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct mt9m111 *mt9m111 = to_mt9m111(client);
 	int ret;
 
-	ret = mt9m111_disable(icd);
+	ret = reg_clear(RESET, MT9M111_RESET_CHIP_ENABLE);
+	if (!ret)
+		mt9m111->powered = 0;
+
 	if (ret < 0)
 		dev_err(&icd->dev, "mt9m11x release failed: %d\n", ret);
 
@@ -909,7 +845,7 @@ static int mt9m111_release(struct soc_camera_device *icd)
 static int mt9m111_video_probe(struct soc_camera_device *icd,
 			       struct i2c_client *client)
 {
-	struct mt9m111 *mt9m111 = i2c_get_clientdata(client);
+	struct mt9m111 *mt9m111 = to_mt9m111(client);
 	s32 data;
 	int ret;
 
@@ -921,15 +857,10 @@ static int mt9m111_video_probe(struct soc_camera_device *icd,
 	    to_soc_camera_host(icd->dev.parent)->nr != icd->iface)
 		return -ENODEV;
 
-	/* Switch master clock on */
-	ret = soc_camera_video_start(icd, &client->dev);
-	if (ret)
-		goto evstart;
-
-	ret = mt9m111_enable(icd);
+	ret = mt9m111_enable(client);
 	if (ret)
 		goto ei2c;
-	ret = mt9m111_reset(icd);
+	ret = mt9m111_reset(client);
 	if (ret)
 		goto ei2c;
 
@@ -961,11 +892,29 @@ static int mt9m111_video_probe(struct soc_camera_device *icd,
 	mt9m111->swap_rgb_red_blue = 1;
 
 ei2c:
-	soc_camera_video_stop(icd);
-evstart:
 	return ret;
 }
 
+static struct v4l2_subdev_core_ops mt9m111_subdev_core_ops = {
+	.g_ctrl		= mt9m111_g_ctrl,
+	.s_ctrl		= mt9m111_s_ctrl,
+	.g_chip_ident	= mt9m111_g_chip_ident,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.g_register	= mt9m111_g_register,
+	.s_register	= mt9m111_s_register,
+#endif
+};
+
+static struct v4l2_subdev_video_ops mt9m111_subdev_video_ops = {
+	.s_fmt		= mt9m111_s_fmt,
+	.try_fmt	= mt9m111_try_fmt,
+};
+
+static struct v4l2_subdev_ops mt9m111_subdev_ops = {
+	.core	= &mt9m111_subdev_core_ops,
+	.video	= &mt9m111_subdev_video_ops,
+};
+
 static int mt9m111_probe(struct i2c_client *client,
 			 const struct i2c_device_id *did)
 {
@@ -996,7 +945,7 @@ static int mt9m111_probe(struct i2c_client *client,
 	if (!mt9m111)
 		return -ENOMEM;
 
-	i2c_set_clientdata(client, mt9m111);
+	v4l2_i2c_subdev_init(&mt9m111->subdev, client, &mt9m111_subdev_ops);
 
 	/* Second stage probe - when a capture adapter is there */
 	icd->ops	= &mt9m111_ops;
@@ -1022,7 +971,7 @@ static int mt9m111_probe(struct i2c_client *client,
 
 static int mt9m111_remove(struct i2c_client *client)
 {
-	struct mt9m111 *mt9m111 = i2c_get_clientdata(client);
+	struct mt9m111 *mt9m111 = to_mt9m111(client);
 	struct soc_camera_device *icd = client->dev.platform_data;
 
 	icd->ops = NULL;
diff --git a/drivers/media/video/mt9t031.c b/drivers/media/video/mt9t031.c
index d9c7c2fd698..27a5edda902 100644
--- a/drivers/media/video/mt9t031.c
+++ b/drivers/media/video/mt9t031.c
@@ -13,13 +13,13 @@
 #include <linux/i2c.h>
 #include <linux/log2.h>
 
-#include <media/v4l2-common.h>
+#include <media/v4l2-subdev.h>
 #include <media/v4l2-chip-ident.h>
 #include <media/soc_camera.h>
 
 /* mt9t031 i2c address 0x5d
- * The platform has to define i2c_board_info
- * and call i2c_register_board_info() */
+ * The platform has to define i2c_board_info and link to it from
+ * struct soc_camera_link */
 
 /* mt9t031 selected register addresses */
 #define MT9T031_CHIP_VERSION		0x00
@@ -68,12 +68,18 @@ static const struct soc_camera_data_format mt9t031_colour_formats[] = {
 };
 
 struct mt9t031 {
+	struct v4l2_subdev subdev;
 	int model;	/* V4L2_IDENT_MT9T031* codes from v4l2-chip-ident.h */
 	unsigned char autoexposure;
 	u16 xskip;
 	u16 yskip;
 };
 
+static struct mt9t031 *to_mt9t031(const struct i2c_client *client)
+{
+	return container_of(i2c_get_clientdata(client), struct mt9t031, subdev);
+}
+
 static int reg_read(struct i2c_client *client, const u8 reg)
 {
 	s32 data = i2c_smbus_read_word_data(client, reg);
@@ -134,21 +140,10 @@ static int get_shutter(struct i2c_client *client, u32 *data)
 	return ret < 0 ? ret : 0;
 }
 
-static int mt9t031_init(struct soc_camera_device *icd)
+static int mt9t031_idle(struct i2c_client *client)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
 	int ret;
 
-	if (icl->power) {
-		ret = icl->power(&client->dev, 1);
-		if (ret < 0) {
-			dev_err(icd->vdev->parent,
-				"Platform failed to power-on the camera.\n");
-			return ret;
-		}
-	}
-
 	/* Disable chip output, synchronous option update */
 	ret = reg_write(client, MT9T031_RESET, 1);
 	if (ret >= 0)
@@ -156,43 +151,46 @@ static int mt9t031_init(struct soc_camera_device *icd)
 	if (ret >= 0)
 		ret = reg_clear(client, MT9T031_OUTPUT_CONTROL, 2);
 
-	if (ret < 0 && icl->power)
-		icl->power(&client->dev, 0);
-
 	return ret >= 0 ? 0 : -EIO;
 }
 
-static int mt9t031_release(struct soc_camera_device *icd)
+static int mt9t031_disable(struct i2c_client *client)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
-
 	/* Disable the chip */
 	reg_clear(client, MT9T031_OUTPUT_CONTROL, 2);
 
-	if (icl->power)
-		icl->power(&client->dev, 0);
-
 	return 0;
 }
 
-static int mt9t031_start_capture(struct soc_camera_device *icd)
+static int mt9t031_init(struct soc_camera_device *icd)
 {
 	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 
-	/* Switch to master "normal" mode */
-	if (reg_set(client, MT9T031_OUTPUT_CONTROL, 2) < 0)
-		return -EIO;
-	return 0;
+	return mt9t031_idle(client);
 }
 
-static int mt9t031_stop_capture(struct soc_camera_device *icd)
+static int mt9t031_release(struct soc_camera_device *icd)
 {
 	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 
-	/* Stop sensor readout */
-	if (reg_clear(client, MT9T031_OUTPUT_CONTROL, 2) < 0)
+	return mt9t031_disable(client);
+}
+
+static int mt9t031_s_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct i2c_client *client = sd->priv;
+	int ret;
+
+	if (enable)
+		/* Switch to master "normal" mode */
+		ret = reg_set(client, MT9T031_OUTPUT_CONTROL, 2);
+	else
+		/* Stop sensor readout */
+		ret = reg_clear(client, MT9T031_OUTPUT_CONTROL, 2);
+
+	if (ret < 0)
 		return -EIO;
+
 	return 0;
 }
 
@@ -236,7 +234,7 @@ static int mt9t031_set_params(struct soc_camera_device *icd,
 			      struct v4l2_rect *rect, u16 xskip, u16 yskip)
 {
 	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9t031 *mt9t031 = i2c_get_clientdata(client);
+	struct mt9t031 *mt9t031 = to_mt9t031(client);
 	int ret;
 	u16 xbin, ybin, width, height, left, top;
 	const u16 hblank = MT9T031_HORIZONTAL_BLANK,
@@ -334,17 +332,17 @@ static int mt9t031_set_crop(struct soc_camera_device *icd,
 			    struct v4l2_rect *rect)
 {
 	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9t031 *mt9t031 = i2c_get_clientdata(client);
+	struct mt9t031 *mt9t031 = to_mt9t031(client);
 
 	/* CROP - no change in scaling, or in limits */
 	return mt9t031_set_params(icd, rect, mt9t031->xskip, mt9t031->yskip);
 }
 
-static int mt9t031_set_fmt(struct soc_camera_device *icd,
-			   struct v4l2_format *f)
+static int mt9t031_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9t031 *mt9t031 = i2c_get_clientdata(client);
+	struct i2c_client *client = sd->priv;
+	struct mt9t031 *mt9t031 = to_mt9t031(client);
+	struct soc_camera_device *icd = client->dev.platform_data;
 	int ret;
 	u16 xskip, yskip;
 	struct v4l2_rect rect = {
@@ -379,8 +377,7 @@ static int mt9t031_set_fmt(struct soc_camera_device *icd,
 	return ret;
 }
 
-static int mt9t031_try_fmt(struct soc_camera_device *icd,
-			   struct v4l2_format *f)
+static int mt9t031_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
 {
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 
@@ -391,11 +388,11 @@ static int mt9t031_try_fmt(struct soc_camera_device *icd,
 	return 0;
 }
 
-static int mt9t031_get_chip_id(struct soc_camera_device *icd,
-			       struct v4l2_dbg_chip_ident *id)
+static int mt9t031_g_chip_ident(struct v4l2_subdev *sd,
+				struct v4l2_dbg_chip_ident *id)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9t031 *mt9t031 = i2c_get_clientdata(client);
+	struct i2c_client *client = sd->priv;
+	struct mt9t031 *mt9t031 = to_mt9t031(client);
 
 	if (id->match.type != V4L2_CHIP_MATCH_I2C_ADDR)
 		return -EINVAL;
@@ -410,10 +407,10 @@ static int mt9t031_get_chip_id(struct soc_camera_device *icd,
 }
 
 #ifdef CONFIG_VIDEO_ADV_DEBUG
-static int mt9t031_get_register(struct soc_camera_device *icd,
-				struct v4l2_dbg_register *reg)
+static int mt9t031_g_register(struct v4l2_subdev *sd,
+			      struct v4l2_dbg_register *reg)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct i2c_client *client = sd->priv;
 
 	if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff)
 		return -EINVAL;
@@ -429,10 +426,10 @@ static int mt9t031_get_register(struct soc_camera_device *icd,
 	return 0;
 }
 
-static int mt9t031_set_register(struct soc_camera_device *icd,
-				struct v4l2_dbg_register *reg)
+static int mt9t031_s_register(struct v4l2_subdev *sd,
+			      struct v4l2_dbg_register *reg)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct i2c_client *client = sd->priv;
 
 	if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff)
 		return -EINVAL;
@@ -493,35 +490,20 @@ static const struct v4l2_queryctrl mt9t031_controls[] = {
 	}
 };
 
-static int mt9t031_get_control(struct soc_camera_device *, struct v4l2_control *);
-static int mt9t031_set_control(struct soc_camera_device *, struct v4l2_control *);
-
 static struct soc_camera_ops mt9t031_ops = {
-	.owner			= THIS_MODULE,
 	.init			= mt9t031_init,
 	.release		= mt9t031_release,
-	.start_capture		= mt9t031_start_capture,
-	.stop_capture		= mt9t031_stop_capture,
 	.set_crop		= mt9t031_set_crop,
-	.set_fmt		= mt9t031_set_fmt,
-	.try_fmt		= mt9t031_try_fmt,
 	.set_bus_param		= mt9t031_set_bus_param,
 	.query_bus_param	= mt9t031_query_bus_param,
 	.controls		= mt9t031_controls,
 	.num_controls		= ARRAY_SIZE(mt9t031_controls),
-	.get_control		= mt9t031_get_control,
-	.set_control		= mt9t031_set_control,
-	.get_chip_id		= mt9t031_get_chip_id,
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.get_register		= mt9t031_get_register,
-	.set_register		= mt9t031_set_register,
-#endif
 };
 
-static int mt9t031_get_control(struct soc_camera_device *icd, struct v4l2_control *ctrl)
+static int mt9t031_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9t031 *mt9t031 = i2c_get_clientdata(client);
+	struct i2c_client *client = sd->priv;
+	struct mt9t031 *mt9t031 = to_mt9t031(client);
 	int data;
 
 	switch (ctrl->id) {
@@ -544,10 +526,11 @@ static int mt9t031_get_control(struct soc_camera_device *icd, struct v4l2_contro
 	return 0;
 }
 
-static int mt9t031_set_control(struct soc_camera_device *icd, struct v4l2_control *ctrl)
+static int mt9t031_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9t031 *mt9t031 = i2c_get_clientdata(client);
+	struct i2c_client *client = sd->priv;
+	struct mt9t031 *mt9t031 = to_mt9t031(client);
+	struct soc_camera_device *icd = client->dev.platform_data;
 	const struct v4l2_queryctrl *qctrl;
 	int data;
 
@@ -653,12 +636,11 @@ static int mt9t031_set_control(struct soc_camera_device *icd, struct v4l2_contro
 
 /* Interface active, can use i2c. If it fails, it can indeed mean, that
  * this wasn't our capture interface, so, we wait for the right one */
-static int mt9t031_video_probe(struct soc_camera_device *icd,
-			       struct i2c_client *client)
+static int mt9t031_video_probe(struct i2c_client *client)
 {
-	struct mt9t031 *mt9t031 = i2c_get_clientdata(client);
+	struct soc_camera_device *icd = client->dev.platform_data;
+	struct mt9t031 *mt9t031 = to_mt9t031(client);
 	s32 data;
-	int ret;
 
 	/* We must have a parent by now. And it cannot be a wrong one.
 	 * So this entire test is completely redundant. */
@@ -666,11 +648,6 @@ static int mt9t031_video_probe(struct soc_camera_device *icd,
 	    to_soc_camera_host(icd->dev.parent)->nr != icd->iface)
 		return -ENODEV;
 
-	/* Switch master clock on */
-	ret = soc_camera_video_start(icd, &client->dev);
-	if (ret)
-		return ret;
-
 	/* Enable the chip */
 	data = reg_write(client, MT9T031_CHIP_ENABLE, 1);
 	dev_dbg(&icd->dev, "write: %d\n", data);
@@ -678,8 +655,6 @@ static int mt9t031_video_probe(struct soc_camera_device *icd,
 	/* Read out the chip version register */
 	data = reg_read(client, MT9T031_CHIP_VERSION);
 
-	soc_camera_video_stop(icd);
-
 	switch (data) {
 	case 0x1621:
 		mt9t031->model = V4L2_IDENT_MT9T031;
@@ -697,6 +672,27 @@ static int mt9t031_video_probe(struct soc_camera_device *icd,
 	return 0;
 }
 
+static struct v4l2_subdev_core_ops mt9t031_subdev_core_ops = {
+	.g_ctrl		= mt9t031_g_ctrl,
+	.s_ctrl		= mt9t031_s_ctrl,
+	.g_chip_ident	= mt9t031_g_chip_ident,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.g_register	= mt9t031_g_register,
+	.s_register	= mt9t031_s_register,
+#endif
+};
+
+static struct v4l2_subdev_video_ops mt9t031_subdev_video_ops = {
+	.s_stream	= mt9t031_s_stream,
+	.s_fmt		= mt9t031_s_fmt,
+	.try_fmt	= mt9t031_try_fmt,
+};
+
+static struct v4l2_subdev_ops mt9t031_subdev_ops = {
+	.core	= &mt9t031_subdev_core_ops,
+	.video	= &mt9t031_subdev_video_ops,
+};
+
 static int mt9t031_probe(struct i2c_client *client,
 			 const struct i2c_device_id *did)
 {
@@ -727,7 +723,7 @@ static int mt9t031_probe(struct i2c_client *client,
 	if (!mt9t031)
 		return -ENOMEM;
 
-	i2c_set_clientdata(client, mt9t031);
+	v4l2_i2c_subdev_init(&mt9t031->subdev, client, &mt9t031_subdev_ops);
 
 	/* Second stage probe - when a capture adapter is there */
 	icd->ops	= &mt9t031_ops;
@@ -747,7 +743,12 @@ static int mt9t031_probe(struct i2c_client *client,
 	mt9t031->xskip = 1;
 	mt9t031->yskip = 1;
 
-	ret = mt9t031_video_probe(icd, client);
+	mt9t031_idle(client);
+
+	ret = mt9t031_video_probe(client);
+
+	mt9t031_disable(client);
+
 	if (ret) {
 		icd->ops = NULL;
 		i2c_set_clientdata(client, NULL);
@@ -759,7 +760,7 @@ static int mt9t031_probe(struct i2c_client *client,
 
 static int mt9t031_remove(struct i2c_client *client)
 {
-	struct mt9t031 *mt9t031 = i2c_get_clientdata(client);
+	struct mt9t031 *mt9t031 = to_mt9t031(client);
 	struct soc_camera_device *icd = client->dev.platform_data;
 
 	icd->ops = NULL;
diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c
index 959cc299f1a..3cb9f0f1e25 100644
--- a/drivers/media/video/mt9v022.c
+++ b/drivers/media/video/mt9v022.c
@@ -14,13 +14,13 @@
 #include <linux/delay.h>
 #include <linux/log2.h>
 
-#include <media/v4l2-common.h>
+#include <media/v4l2-subdev.h>
 #include <media/v4l2-chip-ident.h>
 #include <media/soc_camera.h>
 
 /* mt9v022 i2c address 0x48, 0x4c, 0x58, 0x5c
- * The platform has to define i2c_board_info
- * and call i2c_register_board_info() */
+ * The platform has to define ctruct i2c_board_info objects and link to them
+ * from struct soc_camera_link */
 
 static char *sensor_type;
 module_param(sensor_type, charp, S_IRUGO);
@@ -85,10 +85,16 @@ static const struct soc_camera_data_format mt9v022_monochrome_formats[] = {
 };
 
 struct mt9v022 {
+	struct v4l2_subdev subdev;
 	int model;	/* V4L2_IDENT_MT9V022* codes from v4l2-chip-ident.h */
 	u16 chip_control;
 };
 
+static struct mt9v022 *to_mt9v022(const struct i2c_client *client)
+{
+	return container_of(i2c_get_clientdata(client), struct mt9v022, subdev);
+}
+
 static int reg_read(struct i2c_client *client, const u8 reg)
 {
 	s32 data = i2c_smbus_read_word_data(client, reg);
@@ -126,26 +132,9 @@ static int reg_clear(struct i2c_client *client, const u8 reg,
 static int mt9v022_init(struct soc_camera_device *icd)
 {
 	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
-	struct mt9v022 *mt9v022 = i2c_get_clientdata(client);
+	struct mt9v022 *mt9v022 = to_mt9v022(client);
 	int ret;
 
-	if (icl->power) {
-		ret = icl->power(&client->dev, 1);
-		if (ret < 0) {
-			dev_err(icd->vdev->parent,
-				"Platform failed to power-on the camera.\n");
-			return ret;
-		}
-	}
-
-	/*
-	 * The camera could have been already on, we hard-reset it additionally,
-	 * if available. Soft reset is done in video_probe().
-	 */
-	if (icl->reset)
-		icl->reset(&client->dev);
-
 	/* Almost the default mode: master, parallel, simultaneous, and an
 	 * undocumented bit 0x200, which is present in table 7, but not in 8,
 	 * plus snapshot mode to disable scan for now */
@@ -169,37 +158,19 @@ static int mt9v022_init(struct soc_camera_device *icd)
 	return ret;
 }
 
-static int mt9v022_release(struct soc_camera_device *icd)
+static int mt9v022_s_stream(struct v4l2_subdev *sd, int enable)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
+	struct i2c_client *client = sd->priv;
+	struct mt9v022 *mt9v022 = to_mt9v022(client);
 
-	if (icl->power)
-		icl->power(&client->dev, 0);
-
-	return 0;
-}
-
-static int mt9v022_start_capture(struct soc_camera_device *icd)
-{
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9v022 *mt9v022 = i2c_get_clientdata(client);
-	/* Switch to master "normal" mode */
-	mt9v022->chip_control &= ~0x10;
-	if (reg_write(client, MT9V022_CHIP_CONTROL,
-		      mt9v022->chip_control) < 0)
-		return -EIO;
-	return 0;
-}
+	if (enable)
+		/* Switch to master "normal" mode */
+		mt9v022->chip_control &= ~0x10;
+	else
+		/* Switch to snapshot mode */
+		mt9v022->chip_control |= 0x10;
 
-static int mt9v022_stop_capture(struct soc_camera_device *icd)
-{
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9v022 *mt9v022 = i2c_get_clientdata(client);
-	/* Switch to snapshot mode */
-	mt9v022->chip_control |= 0x10;
-	if (reg_write(client, MT9V022_CHIP_CONTROL,
-		      mt9v022->chip_control) < 0)
+	if (reg_write(client, MT9V022_CHIP_CONTROL, mt9v022->chip_control) < 0)
 		return -EIO;
 	return 0;
 }
@@ -208,7 +179,7 @@ static int mt9v022_set_bus_param(struct soc_camera_device *icd,
 				 unsigned long flags)
 {
 	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9v022 *mt9v022 = i2c_get_clientdata(client);
+	struct mt9v022 *mt9v022 = to_mt9v022(client);
 	struct soc_camera_link *icl = to_soc_camera_link(icd);
 	unsigned int width_flag = flags & SOCAM_DATAWIDTH_MASK;
 	int ret;
@@ -320,11 +291,11 @@ static int mt9v022_set_crop(struct soc_camera_device *icd,
 	return 0;
 }
 
-static int mt9v022_set_fmt(struct soc_camera_device *icd,
-			   struct v4l2_format *f)
+static int mt9v022_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9v022 *mt9v022 = i2c_get_clientdata(client);
+	struct i2c_client *client = sd->priv;
+	struct mt9v022 *mt9v022 = to_mt9v022(client);
+	struct soc_camera_device *icd = client->dev.platform_data;
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 	struct v4l2_rect rect = {
 		.left	= icd->x_current,
@@ -357,9 +328,10 @@ static int mt9v022_set_fmt(struct soc_camera_device *icd,
 	return mt9v022_set_crop(icd, &rect);
 }
 
-static int mt9v022_try_fmt(struct soc_camera_device *icd,
-			   struct v4l2_format *f)
+static int mt9v022_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
 {
+	struct i2c_client *client = sd->priv;
+	struct soc_camera_device *icd = client->dev.platform_data;
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 
 	v4l_bound_align_image(&pix->width, 48, 752, 2 /* ? */,
@@ -369,11 +341,11 @@ static int mt9v022_try_fmt(struct soc_camera_device *icd,
 	return 0;
 }
 
-static int mt9v022_get_chip_id(struct soc_camera_device *icd,
-			       struct v4l2_dbg_chip_ident *id)
+static int mt9v022_g_chip_ident(struct v4l2_subdev *sd,
+				struct v4l2_dbg_chip_ident *id)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9v022 *mt9v022 = i2c_get_clientdata(client);
+	struct i2c_client *client = sd->priv;
+	struct mt9v022 *mt9v022 = to_mt9v022(client);
 
 	if (id->match.type != V4L2_CHIP_MATCH_I2C_ADDR)
 		return -EINVAL;
@@ -388,10 +360,10 @@ static int mt9v022_get_chip_id(struct soc_camera_device *icd,
 }
 
 #ifdef CONFIG_VIDEO_ADV_DEBUG
-static int mt9v022_get_register(struct soc_camera_device *icd,
-				struct v4l2_dbg_register *reg)
+static int mt9v022_g_register(struct v4l2_subdev *sd,
+			      struct v4l2_dbg_register *reg)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct i2c_client *client = sd->priv;
 
 	if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff)
 		return -EINVAL;
@@ -408,10 +380,10 @@ static int mt9v022_get_register(struct soc_camera_device *icd,
 	return 0;
 }
 
-static int mt9v022_set_register(struct soc_camera_device *icd,
-				struct v4l2_dbg_register *reg)
+static int mt9v022_s_register(struct v4l2_subdev *sd,
+			      struct v4l2_dbg_register *reg)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct i2c_client *client = sd->priv;
 
 	if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff)
 		return -EINVAL;
@@ -480,35 +452,18 @@ static const struct v4l2_queryctrl mt9v022_controls[] = {
 	}
 };
 
-static int mt9v022_get_control(struct soc_camera_device *, struct v4l2_control *);
-static int mt9v022_set_control(struct soc_camera_device *, struct v4l2_control *);
-
 static struct soc_camera_ops mt9v022_ops = {
-	.owner			= THIS_MODULE,
 	.init			= mt9v022_init,
-	.release		= mt9v022_release,
-	.start_capture		= mt9v022_start_capture,
-	.stop_capture		= mt9v022_stop_capture,
 	.set_crop		= mt9v022_set_crop,
-	.set_fmt		= mt9v022_set_fmt,
-	.try_fmt		= mt9v022_try_fmt,
 	.set_bus_param		= mt9v022_set_bus_param,
 	.query_bus_param	= mt9v022_query_bus_param,
 	.controls		= mt9v022_controls,
 	.num_controls		= ARRAY_SIZE(mt9v022_controls),
-	.get_control		= mt9v022_get_control,
-	.set_control		= mt9v022_set_control,
-	.get_chip_id		= mt9v022_get_chip_id,
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.get_register		= mt9v022_get_register,
-	.set_register		= mt9v022_set_register,
-#endif
 };
 
-static int mt9v022_get_control(struct soc_camera_device *icd,
-			       struct v4l2_control *ctrl)
+static int mt9v022_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct i2c_client *client = sd->priv;
 	int data;
 
 	switch (ctrl->id) {
@@ -540,15 +495,14 @@ static int mt9v022_get_control(struct soc_camera_device *icd,
 	return 0;
 }
 
-static int mt9v022_set_control(struct soc_camera_device *icd,
-			       struct v4l2_control *ctrl)
+static int mt9v022_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 {
 	int data;
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct i2c_client *client = sd->priv;
+	struct soc_camera_device *icd = client->dev.platform_data;
 	const struct v4l2_queryctrl *qctrl;
 
 	qctrl = soc_camera_find_qctrl(&mt9v022_ops, ctrl->id);
-
 	if (!qctrl)
 		return -EINVAL;
 
@@ -644,7 +598,7 @@ static int mt9v022_set_control(struct soc_camera_device *icd,
 static int mt9v022_video_probe(struct soc_camera_device *icd,
 			       struct i2c_client *client)
 {
-	struct mt9v022 *mt9v022 = i2c_get_clientdata(client);
+	struct mt9v022 *mt9v022 = to_mt9v022(client);
 	struct soc_camera_link *icl = to_soc_camera_link(icd);
 	s32 data;
 	int ret;
@@ -654,11 +608,6 @@ static int mt9v022_video_probe(struct soc_camera_device *icd,
 	    to_soc_camera_host(icd->dev.parent)->nr != icd->iface)
 		return -ENODEV;
 
-	/* Switch master clock on */
-	ret = soc_camera_video_start(icd, &client->dev);
-	if (ret)
-		return ret;
-
 	/* Read out the chip version register */
 	data = reg_read(client, MT9V022_CHIP_VERSION);
 
@@ -723,8 +672,6 @@ static int mt9v022_video_probe(struct soc_camera_device *icd,
 		 "monochrome" : "colour");
 
 ei2c:
-	soc_camera_video_stop(icd);
-
 	return ret;
 }
 
@@ -739,6 +686,27 @@ static void mt9v022_video_remove(struct soc_camera_device *icd)
 		icl->free_bus(icl);
 }
 
+static struct v4l2_subdev_core_ops mt9v022_subdev_core_ops = {
+	.g_ctrl		= mt9v022_g_ctrl,
+	.s_ctrl		= mt9v022_s_ctrl,
+	.g_chip_ident	= mt9v022_g_chip_ident,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.g_register	= mt9v022_g_register,
+	.s_register	= mt9v022_s_register,
+#endif
+};
+
+static struct v4l2_subdev_video_ops mt9v022_subdev_video_ops = {
+	.s_stream	= mt9v022_s_stream,
+	.s_fmt		= mt9v022_s_fmt,
+	.try_fmt	= mt9v022_try_fmt,
+};
+
+static struct v4l2_subdev_ops mt9v022_subdev_ops = {
+	.core	= &mt9v022_subdev_core_ops,
+	.video	= &mt9v022_subdev_video_ops,
+};
+
 static int mt9v022_probe(struct i2c_client *client,
 			 const struct i2c_device_id *did)
 {
@@ -769,8 +737,9 @@ static int mt9v022_probe(struct i2c_client *client,
 	if (!mt9v022)
 		return -ENOMEM;
 
+	v4l2_i2c_subdev_init(&mt9v022->subdev, client, &mt9v022_subdev_ops);
+
 	mt9v022->chip_control = MT9V022_CHIP_CONTROL_DEFAULT;
-	i2c_set_clientdata(client, mt9v022);
 
 	icd->ops	= &mt9v022_ops;
 	icd->x_min	= 1;
@@ -795,7 +764,7 @@ static int mt9v022_probe(struct i2c_client *client,
 
 static int mt9v022_remove(struct i2c_client *client)
 {
-	struct mt9v022 *mt9v022 = i2c_get_clientdata(client);
+	struct mt9v022 *mt9v022 = to_mt9v022(client);
 	struct soc_camera_device *icd = client->dev.platform_data;
 
 	icd->ops = NULL;
diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c
index 736c31d2319..ea4ceaec85f 100644
--- a/drivers/media/video/mx1_camera.c
+++ b/drivers/media/video/mx1_camera.c
@@ -219,7 +219,7 @@ static int mx1_camera_setup_dma(struct mx1_camera_dev *pcdev)
 	int ret;
 
 	if (unlikely(!pcdev->active)) {
-		dev_err(pcdev->soc_host.dev, "DMA End IRQ with no active buffer\n");
+		dev_err(pcdev->icd->dev.parent, "DMA End IRQ with no active buffer\n");
 		return -EFAULT;
 	}
 
@@ -229,7 +229,7 @@ static int mx1_camera_setup_dma(struct mx1_camera_dev *pcdev)
 		vbuf->size, pcdev->res->start +
 		CSIRXR, DMA_MODE_READ);
 	if (unlikely(ret))
-		dev_err(pcdev->soc_host.dev, "Failed to setup DMA sg list\n");
+		dev_err(pcdev->icd->dev.parent, "Failed to setup DMA sg list\n");
 
 	return ret;
 }
@@ -334,14 +334,14 @@ static void mx1_camera_dma_irq(int channel, void *data)
 	imx_dma_disable(channel);
 
 	if (unlikely(!pcdev->active)) {
-		dev_err(pcdev->soc_host.dev, "DMA End IRQ with no active buffer\n");
+		dev_err(pcdev->icd->dev.parent, "DMA End IRQ with no active buffer\n");
 		goto out;
 	}
 
 	vb = &pcdev->active->vb;
 	buf = container_of(vb, struct mx1_buffer, vb);
 	WARN_ON(buf->inwork || list_empty(&vb->queue));
-	dev_dbg(pcdev->soc_host.dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+	dev_dbg(pcdev->icd->dev.parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
 		vb, vb->baddr, vb->bsize);
 
 	mx1_camera_wakeup(pcdev, vb, buf);
@@ -362,7 +362,7 @@ static void mx1_camera_init_videobuf(struct videobuf_queue *q,
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	struct mx1_camera_dev *pcdev = ici->priv;
 
-	videobuf_queue_dma_contig_init(q, &mx1_videobuf_ops, ici->dev,
+	videobuf_queue_dma_contig_init(q, &mx1_videobuf_ops, icd->dev.parent,
 					&pcdev->lock,
 					V4L2_BUF_TYPE_VIDEO_CAPTURE,
 					V4L2_FIELD_NONE,
@@ -381,7 +381,7 @@ static int mclk_get_divisor(struct mx1_camera_dev *pcdev)
 	 * they get a nice Oops */
 	div = (lcdclk + 2 * mclk - 1) / (2 * mclk) - 1;
 
-	dev_dbg(pcdev->soc_host.dev, "System clock %lukHz, target freq %dkHz, "
+	dev_dbg(pcdev->icd->dev.parent, "System clock %lukHz, target freq %dkHz, "
 		"divisor %lu\n", lcdclk / 1000, mclk / 1000, div);
 
 	return div;
@@ -391,7 +391,7 @@ static void mx1_camera_activate(struct mx1_camera_dev *pcdev)
 {
 	unsigned int csicr1 = CSICR1_EN;
 
-	dev_dbg(pcdev->soc_host.dev, "Activate device\n");
+	dev_dbg(pcdev->icd->dev.parent, "Activate device\n");
 
 	clk_enable(pcdev->clk);
 
@@ -407,7 +407,7 @@ static void mx1_camera_activate(struct mx1_camera_dev *pcdev)
 
 static void mx1_camera_deactivate(struct mx1_camera_dev *pcdev)
 {
-	dev_dbg(pcdev->soc_host.dev, "Deactivate device\n");
+	dev_dbg(pcdev->icd->dev.parent, "Deactivate device\n");
 
 	/* Disable all CSI interface */
 	__raw_writel(0x00, pcdev->base + CSICR1);
@@ -432,10 +432,8 @@ static int mx1_camera_add_device(struct soc_camera_device *icd)
 		 icd->devnum);
 
 	mx1_camera_activate(pcdev);
-	ret = icd->ops->init(icd);
 
-	if (!ret)
-		pcdev->icd = icd;
+	pcdev->icd = icd;
 
 ebusy:
 	return ret;
@@ -459,8 +457,6 @@ static void mx1_camera_remove_device(struct soc_camera_device *icd)
 	dev_info(&icd->dev, "MX1 Camera driver detached from camera %d\n",
 		 icd->devnum);
 
-	icd->ops->release(icd);
-
 	mx1_camera_deactivate(pcdev);
 
 	pcdev->icd = NULL;
@@ -546,11 +542,11 @@ static int mx1_camera_set_fmt(struct soc_camera_device *icd,
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
 	if (!xlate) {
-		dev_warn(ici->dev, "Format %x not found\n", pix->pixelformat);
+		dev_warn(icd->dev.parent, "Format %x not found\n", pix->pixelformat);
 		return -EINVAL;
 	}
 
-	ret = icd->ops->set_fmt(icd, f);
+	ret = v4l2_device_call_until_err(&ici->v4l2_dev, 0, video, s_fmt, f);
 	if (!ret) {
 		icd->buswidth = xlate->buswidth;
 		icd->current_fmt = xlate->host_fmt;
@@ -562,10 +558,11 @@ static int mx1_camera_set_fmt(struct soc_camera_device *icd,
 static int mx1_camera_try_fmt(struct soc_camera_device *icd,
 			      struct v4l2_format *f)
 {
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	/* TODO: limit to mx1 hardware capabilities */
 
 	/* limit to sensor capabilities */
-	return icd->ops->try_fmt(icd, f);
+	return v4l2_device_call_until_err(&ici->v4l2_dev, 0, video, try_fmt, f);
 }
 
 static int mx1_camera_reqbufs(struct soc_camera_file *icf,
@@ -737,7 +734,7 @@ static int __init mx1_camera_probe(struct platform_device *pdev)
 	pcdev->soc_host.drv_name	= DRIVER_NAME;
 	pcdev->soc_host.ops		= &mx1_soc_camera_host_ops;
 	pcdev->soc_host.priv		= pcdev;
-	pcdev->soc_host.dev		= &pdev->dev;
+	pcdev->soc_host.v4l2_dev.dev	= &pdev->dev;
 	pcdev->soc_host.nr		= pdev->id;
 	err = soc_camera_host_register(&pcdev->soc_host);
 	if (err)
diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c
index 2edf77a6256..677d355be8f 100644
--- a/drivers/media/video/mx3_camera.c
+++ b/drivers/media/video/mx3_camera.c
@@ -431,7 +431,7 @@ static void mx3_camera_init_videobuf(struct videobuf_queue *q,
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	struct mx3_camera_dev *mx3_cam = ici->priv;
 
-	videobuf_queue_dma_contig_init(q, &mx3_videobuf_ops, ici->dev,
+	videobuf_queue_dma_contig_init(q, &mx3_videobuf_ops, icd->dev.parent,
 				       &mx3_cam->lock,
 				       V4L2_BUF_TYPE_VIDEO_CAPTURE,
 				       V4L2_FIELD_NONE,
@@ -494,17 +494,11 @@ static int mx3_camera_add_device(struct soc_camera_device *icd)
 {
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	struct mx3_camera_dev *mx3_cam = ici->priv;
-	int ret;
 
-	if (mx3_cam->icd) {
-		ret = -EBUSY;
-		goto ebusy;
-	}
+	if (mx3_cam->icd)
+		return -EBUSY;
 
 	mx3_camera_activate(mx3_cam, icd);
-	ret = icd->ops->init(icd);
-	if (ret < 0)
-		goto einit;
 
 	mx3_cam->icd = icd;
 
@@ -512,12 +506,6 @@ static int mx3_camera_add_device(struct soc_camera_device *icd)
 		 icd->devnum);
 
 	return 0;
-
-einit:
-	clk_disable(mx3_cam->clk);
-ebusy:
-
-	return ret;
 }
 
 /* Called with .video_lock held */
@@ -534,8 +522,6 @@ static void mx3_camera_remove_device(struct soc_camera_device *icd)
 		*ichan = NULL;
 	}
 
-	icd->ops->release(icd);
-
 	clk_disable(mx3_cam->clk);
 
 	mx3_cam->icd = NULL;
@@ -600,7 +586,7 @@ static int test_platform_param(struct mx3_camera_dev *mx3_cam,
 		*flags |= SOCAM_DATAWIDTH_4;
 		break;
 	default:
-		dev_info(mx3_cam->soc_host.dev, "Unsupported bus width %d\n",
+		dev_info(mx3_cam->soc_host.v4l2_dev.dev, "Unsupported bus width %d\n",
 			 buswidth);
 		return -EINVAL;
 	}
@@ -616,7 +602,7 @@ static int mx3_camera_try_bus_param(struct soc_camera_device *icd,
 	unsigned long bus_flags, camera_flags;
 	int ret = test_platform_param(mx3_cam, depth, &bus_flags);
 
-	dev_dbg(ici->dev, "requested bus width %d bit: %d\n", depth, ret);
+	dev_dbg(icd->dev.parent, "requested bus width %d bit: %d\n", depth, ret);
 
 	if (ret < 0)
 		return ret;
@@ -639,7 +625,7 @@ static bool chan_filter(struct dma_chan *chan, void *arg)
 	if (!rq)
 		return false;
 
-	pdata = rq->mx3_cam->soc_host.dev->platform_data;
+	pdata = rq->mx3_cam->soc_host.v4l2_dev.dev->platform_data;
 
 	return rq->id == chan->chan_id &&
 		pdata->dma_dev == chan->device->dev;
@@ -699,7 +685,7 @@ static int mx3_camera_get_formats(struct soc_camera_device *icd, int idx,
 			xlate->cam_fmt = icd->formats + idx;
 			xlate->buswidth = buswidth;
 			xlate++;
-			dev_dbg(ici->dev, "Providing format %s using %s\n",
+			dev_dbg(icd->dev.parent, "Providing format %s using %s\n",
 				mx3_camera_formats[0].name,
 				icd->formats[idx].name);
 		}
@@ -711,7 +697,7 @@ static int mx3_camera_get_formats(struct soc_camera_device *icd, int idx,
 			xlate->cam_fmt = icd->formats + idx;
 			xlate->buswidth = buswidth;
 			xlate++;
-			dev_dbg(ici->dev, "Providing format %s using %s\n",
+			dev_dbg(icd->dev.parent, "Providing format %s using %s\n",
 				mx3_camera_formats[0].name,
 				icd->formats[idx].name);
 		}
@@ -724,7 +710,7 @@ passthrough:
 			xlate->cam_fmt = icd->formats + idx;
 			xlate->buswidth = buswidth;
 			xlate++;
-			dev_dbg(ici->dev,
+			dev_dbg(icd->dev.parent,
 				"Providing format %s in pass-through mode\n",
 				icd->formats[idx].name);
 		}
@@ -831,7 +817,7 @@ static int mx3_camera_set_fmt(struct soc_camera_device *icd,
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
 	if (!xlate) {
-		dev_warn(ici->dev, "Format %x not found\n", pix->pixelformat);
+		dev_warn(icd->dev.parent, "Format %x not found\n", pix->pixelformat);
 		return -EINVAL;
 	}
 
@@ -847,7 +833,7 @@ static int mx3_camera_set_fmt(struct soc_camera_device *icd,
 
 	configure_geometry(mx3_cam, &rect);
 
-	ret = icd->ops->set_fmt(icd, f);
+	ret = v4l2_device_call_until_err(&ici->v4l2_dev, 0, video, s_fmt, f);
 	if (!ret) {
 		icd->buswidth = xlate->buswidth;
 		icd->current_fmt = xlate->host_fmt;
@@ -868,7 +854,7 @@ static int mx3_camera_try_fmt(struct soc_camera_device *icd,
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
 	if (pixfmt && !xlate) {
-		dev_warn(ici->dev, "Format %x not found\n", pixfmt);
+		dev_warn(icd->dev.parent, "Format %x not found\n", pixfmt);
 		return -EINVAL;
 	}
 
@@ -885,7 +871,7 @@ static int mx3_camera_try_fmt(struct soc_camera_device *icd,
 	/* camera has to see its format, but the user the original one */
 	pix->pixelformat = xlate->cam_fmt->fourcc;
 	/* limit to sensor capabilities */
-	ret = icd->ops->try_fmt(icd, f);
+	ret = v4l2_device_call_until_err(&ici->v4l2_dev, 0, video, try_fmt, f);
 	pix->pixelformat = xlate->host_fmt->fourcc;
 
 	field = pix->field;
@@ -935,11 +921,11 @@ static int mx3_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
 	if (!xlate) {
-		dev_warn(ici->dev, "Format %x not found\n", pixfmt);
+		dev_warn(icd->dev.parent, "Format %x not found\n", pixfmt);
 		return -EINVAL;
 	}
 
-	dev_dbg(ici->dev, "requested bus width %d bit: %d\n",
+	dev_dbg(icd->dev.parent, "requested bus width %d bit: %d\n",
 		icd->buswidth, ret);
 
 	if (ret < 0)
@@ -948,10 +934,10 @@ static int mx3_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
 	camera_flags = icd->ops->query_bus_param(icd);
 
 	common_flags = soc_camera_bus_param_compatible(camera_flags, bus_flags);
-	dev_dbg(ici->dev, "Flags cam: 0x%lx host: 0x%lx common: 0x%lx\n",
+	dev_dbg(icd->dev.parent, "Flags cam: 0x%lx host: 0x%lx common: 0x%lx\n",
 		camera_flags, bus_flags, common_flags);
 	if (!common_flags) {
-		dev_dbg(ici->dev, "no common flags");
+		dev_dbg(icd->dev.parent, "no common flags");
 		return -EINVAL;
 	}
 
@@ -1005,7 +991,7 @@ static int mx3_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
 
 	ret = icd->ops->set_bus_param(icd, common_flags);
 	if (ret < 0) {
-		dev_dbg(ici->dev, "camera set_bus_param(%lx) returned %d\n",
+		dev_dbg(icd->dev.parent, "camera set_bus_param(%lx) returned %d\n",
 			common_flags, ret);
 		return ret;
 	}
@@ -1060,7 +1046,7 @@ static int mx3_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
 
 	csi_reg_write(mx3_cam, sens_conf | dw, CSI_SENS_CONF);
 
-	dev_dbg(ici->dev, "Set SENS_CONF to %x\n", sens_conf | dw);
+	dev_dbg(icd->dev.parent, "Set SENS_CONF to %x\n", sens_conf | dw);
 
 	return 0;
 }
@@ -1145,7 +1131,7 @@ static int __devinit mx3_camera_probe(struct platform_device *pdev)
 	soc_host->drv_name	= MX3_CAM_DRV_NAME;
 	soc_host->ops		= &mx3_soc_camera_host_ops;
 	soc_host->priv		= mx3_cam;
-	soc_host->dev		= &pdev->dev;
+	soc_host->v4l2_dev.dev	= &pdev->dev;
 	soc_host->nr		= pdev->id;
 
 	err = soc_camera_host_register(soc_host);
diff --git a/drivers/media/video/ov772x.c b/drivers/media/video/ov772x.c
index 3ea650d55b1..119159773a6 100644
--- a/drivers/media/video/ov772x.c
+++ b/drivers/media/video/ov772x.c
@@ -22,7 +22,7 @@
 #include <linux/delay.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-chip-ident.h>
-#include <media/v4l2-common.h>
+#include <media/v4l2-subdev.h>
 #include <media/soc_camera.h>
 #include <media/ov772x.h>
 
@@ -398,6 +398,7 @@ struct ov772x_win_size {
 };
 
 struct ov772x_priv {
+	struct v4l2_subdev                subdev;
 	struct ov772x_camera_info        *info;
 	const struct ov772x_color_format *fmt;
 	const struct ov772x_win_size     *win;
@@ -575,6 +576,11 @@ static const struct v4l2_queryctrl ov772x_controls[] = {
  * general function
  */
 
+static struct ov772x_priv *to_ov772x(const struct i2c_client *client)
+{
+	return container_of(i2c_get_clientdata(client), struct ov772x_priv, subdev);
+}
+
 static int ov772x_write_array(struct i2c_client        *client,
 			      const struct regval_list *vals)
 {
@@ -615,61 +621,29 @@ static int ov772x_reset(struct i2c_client *client)
  * soc_camera_ops function
  */
 
-static int ov772x_init(struct soc_camera_device *icd)
+static int ov772x_s_stream(struct v4l2_subdev *sd, int enable)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
-	int ret = 0;
+	struct i2c_client *client = sd->priv;
+	struct ov772x_priv *priv = to_ov772x(client);
 
-	if (icl->power) {
-		ret = icl->power(&client->dev, 1);
-		if (ret < 0)
-			return ret;
+	if (!enable) {
+		ov772x_mask_set(client, COM2, SOFT_SLEEP_MODE, SOFT_SLEEP_MODE);
+		return 0;
 	}
 
-	if (icl->reset)
-		ret = icl->reset(&client->dev);
-
-	return ret;
-}
-
-static int ov772x_release(struct soc_camera_device *icd)
-{
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
-	int ret = 0;
-
-	if (icl->power)
-		ret = icl->power(&client->dev, 0);
-
-	return ret;
-}
-
-static int ov772x_start_capture(struct soc_camera_device *icd)
-{
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct ov772x_priv *priv = i2c_get_clientdata(client);
-
 	if (!priv->win || !priv->fmt) {
-		dev_err(&icd->dev, "norm or win select error\n");
+		dev_err(&client->dev, "norm or win select error\n");
 		return -EPERM;
 	}
 
 	ov772x_mask_set(client, COM2, SOFT_SLEEP_MODE, 0);
 
-	dev_dbg(&icd->dev,
+	dev_dbg(&client->dev,
 		"format %s, win %s\n", priv->fmt->name, priv->win->name);
 
 	return 0;
 }
 
-static int ov772x_stop_capture(struct soc_camera_device *icd)
-{
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	ov772x_mask_set(client, COM2, SOFT_SLEEP_MODE, SOFT_SLEEP_MODE);
-	return 0;
-}
-
 static int ov772x_set_bus_param(struct soc_camera_device *icd,
 				unsigned long		  flags)
 {
@@ -688,11 +662,10 @@ static unsigned long ov772x_query_bus_param(struct soc_camera_device *icd)
 	return soc_camera_apply_sensor_flags(icl, flags);
 }
 
-static int ov772x_get_control(struct soc_camera_device *icd,
-			      struct v4l2_control *ctrl)
+static int ov772x_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct ov772x_priv *priv = i2c_get_clientdata(client);
+	struct i2c_client *client = sd->priv;
+	struct ov772x_priv *priv = to_ov772x(client);
 
 	switch (ctrl->id) {
 	case V4L2_CID_VFLIP:
@@ -705,11 +678,10 @@ static int ov772x_get_control(struct soc_camera_device *icd,
 	return 0;
 }
 
-static int ov772x_set_control(struct soc_camera_device *icd,
-			      struct v4l2_control *ctrl)
+static int ov772x_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct ov772x_priv *priv = i2c_get_clientdata(client);
+	struct i2c_client *client = sd->priv;
+	struct ov772x_priv *priv = to_ov772x(client);
 	int ret = 0;
 	u8 val;
 
@@ -733,11 +705,11 @@ static int ov772x_set_control(struct soc_camera_device *icd,
 	return ret;
 }
 
-static int ov772x_get_chip_id(struct soc_camera_device *icd,
-			      struct v4l2_dbg_chip_ident *id)
+static int ov772x_g_chip_ident(struct v4l2_subdev *sd,
+			       struct v4l2_dbg_chip_ident *id)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct ov772x_priv *priv = i2c_get_clientdata(client);
+	struct i2c_client *client = sd->priv;
+	struct ov772x_priv *priv = to_ov772x(client);
 
 	id->ident    = priv->model;
 	id->revision = 0;
@@ -746,10 +718,10 @@ static int ov772x_get_chip_id(struct soc_camera_device *icd,
 }
 
 #ifdef CONFIG_VIDEO_ADV_DEBUG
-static int ov772x_get_register(struct soc_camera_device *icd,
-			       struct v4l2_dbg_register *reg)
+static int ov772x_g_register(struct v4l2_subdev *sd,
+			     struct v4l2_dbg_register *reg)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct i2c_client *client = sd->priv;
 	int ret;
 
 	reg->size = 1;
@@ -765,10 +737,10 @@ static int ov772x_get_register(struct soc_camera_device *icd,
 	return 0;
 }
 
-static int ov772x_set_register(struct soc_camera_device *icd,
-			       struct v4l2_dbg_register *reg)
+static int ov772x_s_register(struct v4l2_subdev *sd,
+			     struct v4l2_dbg_register *reg)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct i2c_client *client = sd->priv;
 
 	if (reg->reg > 0xff ||
 	    reg->val > 0xff)
@@ -778,8 +750,7 @@ static int ov772x_set_register(struct soc_camera_device *icd,
 }
 #endif
 
-static const struct ov772x_win_size*
-ov772x_select_win(u32 width, u32 height)
+static const struct ov772x_win_size *ov772x_select_win(u32 width, u32 height)
 {
 	__u32 diff;
 	const struct ov772x_win_size *win;
@@ -798,11 +769,10 @@ ov772x_select_win(u32 width, u32 height)
 	return win;
 }
 
-static int ov772x_set_params(struct soc_camera_device *icd,
+static int ov772x_set_params(struct i2c_client *client,
 			     u32 width, u32 height, u32 pixfmt)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct ov772x_priv *priv = i2c_get_clientdata(client);
+	struct ov772x_priv *priv = to_ov772x(client);
 	int ret = -EINVAL;
 	u8  val;
 	int i;
@@ -817,7 +787,6 @@ static int ov772x_set_params(struct soc_camera_device *icd,
 			break;
 		}
 	}
-	dev_dbg(&icd->dev, "Using fmt %x #%d\n", pixfmt, i);
 	if (!priv->fmt)
 		goto ov772x_set_fmt_error;
 
@@ -939,26 +908,26 @@ static int ov772x_set_crop(struct soc_camera_device *icd,
 			   struct v4l2_rect *rect)
 {
 	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct ov772x_priv *priv = i2c_get_clientdata(client);
+	struct ov772x_priv *priv = to_ov772x(client);
 
 	if (!priv->fmt)
 		return -EINVAL;
 
-	return ov772x_set_params(icd, rect->width, rect->height,
+	return ov772x_set_params(client, rect->width, rect->height,
 				 priv->fmt->fourcc);
 }
 
-static int ov772x_set_fmt(struct soc_camera_device *icd,
-			  struct v4l2_format *f)
+static int ov772x_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
 {
+	struct i2c_client *client = sd->priv;
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 
-	return ov772x_set_params(icd, pix->width, pix->height,
+	return ov772x_set_params(client, pix->width, pix->height,
 				 pix->pixelformat);
 }
 
-static int ov772x_try_fmt(struct soc_camera_device *icd,
-			  struct v4l2_format       *f)
+static int ov772x_try_fmt(struct v4l2_subdev *sd,
+			  struct v4l2_format *f)
 {
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 	const struct ov772x_win_size *win;
@@ -978,10 +947,9 @@ static int ov772x_try_fmt(struct soc_camera_device *icd,
 static int ov772x_video_probe(struct soc_camera_device *icd,
 			      struct i2c_client *client)
 {
-	struct ov772x_priv *priv = i2c_get_clientdata(client);
+	struct ov772x_priv *priv = to_ov772x(client);
 	u8                  pid, ver;
 	const char         *devname;
-	int ret;
 
 	/*
 	 * We must have a parent by now. And it cannot be a wrong one.
@@ -1003,11 +971,6 @@ static int ov772x_video_probe(struct soc_camera_device *icd,
 	icd->formats     = ov772x_fmt_lists;
 	icd->num_formats = ARRAY_SIZE(ov772x_fmt_lists);
 
-	/* Switch master clock on */
-	ret = soc_camera_video_start(icd, &client->dev);
-	if (ret)
-		return ret;
-
 	/*
 	 * check and show product ID and manufacturer ID
 	 */
@@ -1026,8 +989,7 @@ static int ov772x_video_probe(struct soc_camera_device *icd,
 	default:
 		dev_err(&icd->dev,
 			"Product ID error %x:%x\n", pid, ver);
-		ret = -ENODEV;
-		goto ever;
+		return -ENODEV;
 	}
 
 	dev_info(&icd->dev,
@@ -1038,34 +1000,38 @@ static int ov772x_video_probe(struct soc_camera_device *icd,
 		 i2c_smbus_read_byte_data(client, MIDH),
 		 i2c_smbus_read_byte_data(client, MIDL));
 
-	soc_camera_video_stop(icd);
-
-ever:
-	return ret;
+	return 0;
 }
 
 static struct soc_camera_ops ov772x_ops = {
-	.owner			= THIS_MODULE,
-	.init			= ov772x_init,
-	.release		= ov772x_release,
-	.start_capture		= ov772x_start_capture,
-	.stop_capture		= ov772x_stop_capture,
 	.set_crop		= ov772x_set_crop,
-	.set_fmt		= ov772x_set_fmt,
-	.try_fmt		= ov772x_try_fmt,
 	.set_bus_param		= ov772x_set_bus_param,
 	.query_bus_param	= ov772x_query_bus_param,
 	.controls		= ov772x_controls,
 	.num_controls		= ARRAY_SIZE(ov772x_controls),
-	.get_control		= ov772x_get_control,
-	.set_control		= ov772x_set_control,
-	.get_chip_id		= ov772x_get_chip_id,
+};
+
+static struct v4l2_subdev_core_ops ov772x_subdev_core_ops = {
+	.g_ctrl		= ov772x_g_ctrl,
+	.s_ctrl		= ov772x_s_ctrl,
+	.g_chip_ident	= ov772x_g_chip_ident,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
-	.get_register		= ov772x_get_register,
-	.set_register		= ov772x_set_register,
+	.g_register	= ov772x_g_register,
+	.s_register	= ov772x_s_register,
 #endif
 };
 
+static struct v4l2_subdev_video_ops ov772x_subdev_video_ops = {
+	.s_stream	= ov772x_s_stream,
+	.s_fmt		= ov772x_s_fmt,
+	.try_fmt	= ov772x_try_fmt,
+};
+
+static struct v4l2_subdev_ops ov772x_subdev_ops = {
+	.core	= &ov772x_subdev_core_ops,
+	.video	= &ov772x_subdev_video_ops,
+};
+
 /*
  * i2c_driver function
  */
@@ -1081,7 +1047,7 @@ static int ov772x_probe(struct i2c_client *client,
 	int                        ret;
 
 	if (!icd) {
-		dev_err(&client->dev, "MT9M001: missing soc-camera data!\n");
+		dev_err(&client->dev, "OV772X: missing soc-camera data!\n");
 		return -EINVAL;
 	}
 
@@ -1102,8 +1068,9 @@ static int ov772x_probe(struct i2c_client *client,
 	if (!priv)
 		return -ENOMEM;
 
-	priv->info   = info;
-	i2c_set_clientdata(client, priv);
+	priv->info = info;
+
+	v4l2_i2c_subdev_init(&priv->subdev, client, &ov772x_subdev_ops);
 
 	icd->ops        = &ov772x_ops;
 	icd->width_max  = MAX_WIDTH;
@@ -1121,7 +1088,7 @@ static int ov772x_probe(struct i2c_client *client,
 
 static int ov772x_remove(struct i2c_client *client)
 {
-	struct ov772x_priv *priv = i2c_get_clientdata(client);
+	struct ov772x_priv *priv = to_ov772x(client);
 	struct soc_camera_device *icd = client->dev.platform_data;
 
 	icd->ops = NULL;
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
index 8b9b44d8683..bdc0d85c461 100644
--- a/drivers/media/video/pxa_camera.c
+++ b/drivers/media/video/pxa_camera.c
@@ -270,7 +270,7 @@ static void free_buffer(struct videobuf_queue *vq, struct pxa_buffer *buf)
 
 	for (i = 0; i < ARRAY_SIZE(buf->dmas); i++) {
 		if (buf->dmas[i].sg_cpu)
-			dma_free_coherent(ici->dev, buf->dmas[i].sg_size,
+			dma_free_coherent(ici->v4l2_dev.dev, buf->dmas[i].sg_size,
 					  buf->dmas[i].sg_cpu,
 					  buf->dmas[i].sg_dma);
 		buf->dmas[i].sg_cpu = NULL;
@@ -325,19 +325,20 @@ static int pxa_init_dma_channel(struct pxa_camera_dev *pcdev,
 				struct scatterlist **sg_first, int *sg_first_ofs)
 {
 	struct pxa_cam_dma *pxa_dma = &buf->dmas[channel];
+	struct device *dev = pcdev->soc_host.v4l2_dev.dev;
 	struct scatterlist *sg;
 	int i, offset, sglen;
 	int dma_len = 0, xfer_len = 0;
 
 	if (pxa_dma->sg_cpu)
-		dma_free_coherent(pcdev->soc_host.dev, pxa_dma->sg_size,
+		dma_free_coherent(dev, pxa_dma->sg_size,
 				  pxa_dma->sg_cpu, pxa_dma->sg_dma);
 
 	sglen = calculate_dma_sglen(*sg_first, dma->sglen,
 				    *sg_first_ofs, size);
 
 	pxa_dma->sg_size = (sglen + 1) * sizeof(struct pxa_dma_desc);
-	pxa_dma->sg_cpu = dma_alloc_coherent(pcdev->soc_host.dev, pxa_dma->sg_size,
+	pxa_dma->sg_cpu = dma_alloc_coherent(dev, pxa_dma->sg_size,
 					     &pxa_dma->sg_dma, GFP_KERNEL);
 	if (!pxa_dma->sg_cpu)
 		return -ENOMEM;
@@ -345,7 +346,7 @@ static int pxa_init_dma_channel(struct pxa_camera_dev *pcdev,
 	pxa_dma->sglen = sglen;
 	offset = *sg_first_ofs;
 
-	dev_dbg(pcdev->soc_host.dev, "DMA: sg_first=%p, sglen=%d, ofs=%d, dma.desc=%x\n",
+	dev_dbg(dev, "DMA: sg_first=%p, sglen=%d, ofs=%d, dma.desc=%x\n",
 		*sg_first, sglen, *sg_first_ofs, pxa_dma->sg_dma);
 
 
@@ -368,7 +369,7 @@ static int pxa_init_dma_channel(struct pxa_camera_dev *pcdev,
 		pxa_dma->sg_cpu[i].ddadr =
 			pxa_dma->sg_dma + (i + 1) * sizeof(struct pxa_dma_desc);
 
-		dev_vdbg(pcdev->soc_host.dev, "DMA: desc.%08x->@phys=0x%08x, len=%d\n",
+		dev_vdbg(dev, "DMA: desc.%08x->@phys=0x%08x, len=%d\n",
 			 pxa_dma->sg_dma + i * sizeof(struct pxa_dma_desc),
 			 sg_dma_address(sg) + offset, xfer_len);
 		offset = 0;
@@ -418,11 +419,12 @@ static int pxa_videobuf_prepare(struct videobuf_queue *vq,
 	struct soc_camera_device *icd = vq->priv_data;
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	struct pxa_camera_dev *pcdev = ici->priv;
+	struct device *dev = pcdev->soc_host.v4l2_dev.dev;
 	struct pxa_buffer *buf = container_of(vb, struct pxa_buffer, vb);
 	int ret;
 	int size_y, size_u = 0, size_v = 0;
 
-	dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+	dev_dbg(dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
 		vb, vb->baddr, vb->bsize);
 
 	/* Added list head initialization on alloc */
@@ -480,8 +482,7 @@ static int pxa_videobuf_prepare(struct videobuf_queue *vq,
 		ret = pxa_init_dma_channel(pcdev, buf, dma, 0, CIBR0, size_y,
 					   &sg, &next_ofs);
 		if (ret) {
-			dev_err(pcdev->soc_host.dev,
-				"DMA initialization for Y/RGB failed\n");
+			dev_err(dev, "DMA initialization for Y/RGB failed\n");
 			goto fail;
 		}
 
@@ -490,8 +491,7 @@ static int pxa_videobuf_prepare(struct videobuf_queue *vq,
 			ret = pxa_init_dma_channel(pcdev, buf, dma, 1, CIBR1,
 						   size_u, &sg, &next_ofs);
 		if (ret) {
-			dev_err(pcdev->soc_host.dev,
-				"DMA initialization for U failed\n");
+			dev_err(dev, "DMA initialization for U failed\n");
 			goto fail_u;
 		}
 
@@ -500,8 +500,7 @@ static int pxa_videobuf_prepare(struct videobuf_queue *vq,
 			ret = pxa_init_dma_channel(pcdev, buf, dma, 2, CIBR2,
 						   size_v, &sg, &next_ofs);
 		if (ret) {
-			dev_err(pcdev->soc_host.dev,
-				"DMA initialization for V failed\n");
+			dev_err(dev, "DMA initialization for V failed\n");
 			goto fail_v;
 		}
 
@@ -514,10 +513,10 @@ static int pxa_videobuf_prepare(struct videobuf_queue *vq,
 	return 0;
 
 fail_v:
-	dma_free_coherent(pcdev->soc_host.dev, buf->dmas[1].sg_size,
+	dma_free_coherent(dev, buf->dmas[1].sg_size,
 			  buf->dmas[1].sg_cpu, buf->dmas[1].sg_dma);
 fail_u:
-	dma_free_coherent(pcdev->soc_host.dev, buf->dmas[0].sg_size,
+	dma_free_coherent(dev, buf->dmas[0].sg_size,
 			  buf->dmas[0].sg_cpu, buf->dmas[0].sg_dma);
 fail:
 	free_buffer(vq, buf);
@@ -541,7 +540,7 @@ static void pxa_dma_start_channels(struct pxa_camera_dev *pcdev)
 	active = pcdev->active;
 
 	for (i = 0; i < pcdev->channels; i++) {
-		dev_dbg(pcdev->soc_host.dev, "%s (channel=%d) ddadr=%08x\n", __func__,
+		dev_dbg(pcdev->soc_host.v4l2_dev.dev, "%s (channel=%d) ddadr=%08x\n", __func__,
 			i, active->dmas[i].sg_dma);
 		DDADR(pcdev->dma_chans[i]) = active->dmas[i].sg_dma;
 		DCSR(pcdev->dma_chans[i]) = DCSR_RUN;
@@ -553,7 +552,7 @@ static void pxa_dma_stop_channels(struct pxa_camera_dev *pcdev)
 	int i;
 
 	for (i = 0; i < pcdev->channels; i++) {
-		dev_dbg(pcdev->soc_host.dev, "%s (channel=%d)\n", __func__, i);
+		dev_dbg(pcdev->soc_host.v4l2_dev.dev, "%s (channel=%d)\n", __func__, i);
 		DCSR(pcdev->dma_chans[i]) = 0;
 	}
 }
@@ -589,7 +588,7 @@ static void pxa_camera_start_capture(struct pxa_camera_dev *pcdev)
 {
 	unsigned long cicr0, cifr;
 
-	dev_dbg(pcdev->soc_host.dev, "%s\n", __func__);
+	dev_dbg(pcdev->soc_host.v4l2_dev.dev, "%s\n", __func__);
 	/* Reset the FIFOs */
 	cifr = __raw_readl(pcdev->base + CIFR) | CIFR_RESET_F;
 	__raw_writel(cifr, pcdev->base + CIFR);
@@ -609,7 +608,7 @@ static void pxa_camera_stop_capture(struct pxa_camera_dev *pcdev)
 	__raw_writel(cicr0, pcdev->base + CICR0);
 
 	pcdev->active = NULL;
-	dev_dbg(pcdev->soc_host.dev, "%s\n", __func__);
+	dev_dbg(pcdev->soc_host.v4l2_dev.dev, "%s\n", __func__);
 }
 
 /* Called under spinlock_irqsave(&pcdev->lock, ...) */
@@ -674,7 +673,8 @@ static void pxa_camera_wakeup(struct pxa_camera_dev *pcdev,
 	do_gettimeofday(&vb->ts);
 	vb->field_count++;
 	wake_up(&vb->done);
-	dev_dbg(pcdev->soc_host.dev, "%s dequeud buffer (vb=0x%p)\n", __func__, vb);
+	dev_dbg(pcdev->soc_host.v4l2_dev.dev, "%s dequeud buffer (vb=0x%p)\n",
+		__func__, vb);
 
 	if (list_empty(&pcdev->capture)) {
 		pxa_camera_stop_capture(pcdev);
@@ -710,7 +710,8 @@ static void pxa_camera_check_link_miss(struct pxa_camera_dev *pcdev)
 	for (i = 0; i < pcdev->channels; i++)
 		if (DDADR(pcdev->dma_chans[i]) != DDADR_STOP)
 			is_dma_stopped = 0;
-	dev_dbg(pcdev->soc_host.dev, "%s : top queued buffer=%p, dma_stopped=%d\n",
+	dev_dbg(pcdev->soc_host.v4l2_dev.dev,
+		"%s : top queued buffer=%p, dma_stopped=%d\n",
 		__func__, pcdev->active, is_dma_stopped);
 	if (pcdev->active && is_dma_stopped)
 		pxa_camera_start_capture(pcdev);
@@ -719,6 +720,7 @@ static void pxa_camera_check_link_miss(struct pxa_camera_dev *pcdev)
 static void pxa_camera_dma_irq(int channel, struct pxa_camera_dev *pcdev,
 			       enum pxa_camera_active_dma act_dma)
 {
+	struct device *dev = pcdev->soc_host.v4l2_dev.dev;
 	struct pxa_buffer *buf;
 	unsigned long flags;
 	u32 status, camera_status, overrun;
@@ -735,13 +737,13 @@ static void pxa_camera_dma_irq(int channel, struct pxa_camera_dev *pcdev,
 		overrun |= CISR_IFO_1 | CISR_IFO_2;
 
 	if (status & DCSR_BUSERR) {
-		dev_err(pcdev->soc_host.dev, "DMA Bus Error IRQ!\n");
+		dev_err(dev, "DMA Bus Error IRQ!\n");
 		goto out;
 	}
 
 	if (!(status & (DCSR_ENDINTR | DCSR_STARTINTR))) {
-		dev_err(pcdev->soc_host.dev, "Unknown DMA IRQ source, "
-			"status: 0x%08x\n", status);
+		dev_err(dev, "Unknown DMA IRQ source, status: 0x%08x\n",
+			status);
 		goto out;
 	}
 
@@ -764,7 +766,7 @@ static void pxa_camera_dma_irq(int channel, struct pxa_camera_dev *pcdev,
 	buf = container_of(vb, struct pxa_buffer, vb);
 	WARN_ON(buf->inwork || list_empty(&vb->queue));
 
-	dev_dbg(pcdev->soc_host.dev, "%s channel=%d %s%s(vb=0x%p) dma.desc=%x\n",
+	dev_dbg(dev, "%s channel=%d %s%s(vb=0x%p) dma.desc=%x\n",
 		__func__, channel, status & DCSR_STARTINTR ? "SOF " : "",
 		status & DCSR_ENDINTR ? "EOF " : "", vb, DDADR(channel));
 
@@ -775,7 +777,7 @@ static void pxa_camera_dma_irq(int channel, struct pxa_camera_dev *pcdev,
 		 */
 		if (camera_status & overrun &&
 		    !list_is_last(pcdev->capture.next, &pcdev->capture)) {
-			dev_dbg(pcdev->soc_host.dev, "FIFO overrun! CISR: %x\n",
+			dev_dbg(dev, "FIFO overrun! CISR: %x\n",
 				camera_status);
 			pxa_camera_stop_capture(pcdev);
 			pxa_camera_start_capture(pcdev);
@@ -834,6 +836,7 @@ static u32 mclk_get_divisor(struct platform_device *pdev,
 			    struct pxa_camera_dev *pcdev)
 {
 	unsigned long mclk = pcdev->mclk;
+	struct device *dev = pcdev->soc_host.v4l2_dev.dev;
 	u32 div;
 	unsigned long lcdclk;
 
@@ -843,7 +846,7 @@ static u32 mclk_get_divisor(struct platform_device *pdev,
 	/* mclk <= ciclk / 4 (27.4.2) */
 	if (mclk > lcdclk / 4) {
 		mclk = lcdclk / 4;
-		dev_warn(&pdev->dev, "Limiting master clock to %lu\n", mclk);
+		dev_warn(dev, "Limiting master clock to %lu\n", mclk);
 	}
 
 	/* We verify mclk != 0, so if anyone breaks it, here comes their Oops */
@@ -853,7 +856,7 @@ static u32 mclk_get_divisor(struct platform_device *pdev,
 	if (pcdev->platform_flags & PXA_CAMERA_MCLK_EN)
 		pcdev->mclk = lcdclk / (2 * (div + 1));
 
-	dev_dbg(&pdev->dev, "LCD clock %luHz, target freq %luHz, divisor %u\n",
+	dev_dbg(dev, "LCD clock %luHz, target freq %luHz, divisor %u\n",
 		lcdclk, mclk, div);
 
 	return div;
@@ -871,14 +874,15 @@ static void recalculate_fifo_timeout(struct pxa_camera_dev *pcdev,
 static void pxa_camera_activate(struct pxa_camera_dev *pcdev)
 {
 	struct pxacamera_platform_data *pdata = pcdev->pdata;
+	struct device *dev = pcdev->soc_host.v4l2_dev.dev;
 	u32 cicr4 = 0;
 
-	dev_dbg(pcdev->soc_host.dev, "Registered platform device at %p data %p\n",
+	dev_dbg(dev, "Registered platform device at %p data %p\n",
 		pcdev, pdata);
 
 	if (pdata && pdata->init) {
-		dev_dbg(pcdev->soc_host.dev, "%s: Init gpios\n", __func__);
-		pdata->init(pcdev->soc_host.dev);
+		dev_dbg(dev, "%s: Init gpios\n", __func__);
+		pdata->init(dev);
 	}
 
 	/* disable all interrupts */
@@ -920,7 +924,7 @@ static irqreturn_t pxa_camera_irq(int irq, void *data)
 	struct videobuf_buffer *vb;
 
 	status = __raw_readl(pcdev->base + CISR);
-	dev_dbg(pcdev->soc_host.dev, "Camera interrupt status 0x%lx\n", status);
+	dev_dbg(pcdev->soc_host.v4l2_dev.dev, "Camera interrupt status 0x%lx\n", status);
 
 	if (!status)
 		return IRQ_NONE;
@@ -952,17 +956,11 @@ static int pxa_camera_add_device(struct soc_camera_device *icd)
 {
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	struct pxa_camera_dev *pcdev = ici->priv;
-	int ret;
 
-	if (pcdev->icd) {
-		ret = -EBUSY;
-		goto ebusy;
-	}
+	if (pcdev->icd)
+		return -EBUSY;
 
 	pxa_camera_activate(pcdev);
-	ret = icd->ops->init(icd);
-	if (ret < 0)
-		goto einit;
 
 	pcdev->icd = icd;
 
@@ -970,11 +968,6 @@ static int pxa_camera_add_device(struct soc_camera_device *icd)
 		 icd->devnum);
 
 	return 0;
-
-einit:
-	pxa_camera_deactivate(pcdev);
-ebusy:
-	return ret;
 }
 
 /* Called with .video_lock held */
@@ -996,8 +989,6 @@ static void pxa_camera_remove_device(struct soc_camera_device *icd)
 	DCSR(pcdev->dma_chans[1]) = 0;
 	DCSR(pcdev->dma_chans[2]) = 0;
 
-	icd->ops->release(icd);
-
 	pxa_camera_deactivate(pcdev);
 
 	pcdev->icd = NULL;
@@ -1253,7 +1244,7 @@ static int pxa_camera_get_formats(struct soc_camera_device *icd, int idx,
 			xlate->cam_fmt = icd->formats + idx;
 			xlate->buswidth = buswidth;
 			xlate++;
-			dev_dbg(ici->dev, "Providing format %s using %s\n",
+			dev_dbg(ici->v4l2_dev.dev, "Providing format %s using %s\n",
 				pxa_camera_formats[0].name,
 				icd->formats[idx].name);
 		}
@@ -1268,7 +1259,7 @@ static int pxa_camera_get_formats(struct soc_camera_device *icd, int idx,
 			xlate->cam_fmt = icd->formats + idx;
 			xlate->buswidth = buswidth;
 			xlate++;
-			dev_dbg(ici->dev, "Providing format %s packed\n",
+			dev_dbg(ici->v4l2_dev.dev, "Providing format %s packed\n",
 				icd->formats[idx].name);
 		}
 		break;
@@ -1280,7 +1271,7 @@ static int pxa_camera_get_formats(struct soc_camera_device *icd, int idx,
 			xlate->cam_fmt = icd->formats + idx;
 			xlate->buswidth = icd->formats[idx].depth;
 			xlate++;
-			dev_dbg(ici->dev,
+			dev_dbg(ici->v4l2_dev.dev,
 				"Providing format %s in pass-through mode\n",
 				icd->formats[idx].name);
 		}
@@ -1309,11 +1300,11 @@ static int pxa_camera_set_crop(struct soc_camera_device *icd,
 	icd->sense = NULL;
 
 	if (ret < 0) {
-		dev_warn(ici->dev, "Failed to crop to %ux%u@%u:%u\n",
+		dev_warn(ici->v4l2_dev.dev, "Failed to crop to %ux%u@%u:%u\n",
 			 rect->width, rect->height, rect->left, rect->top);
 	} else if (sense.flags & SOCAM_SENSE_PCLK_CHANGED) {
 		if (sense.pixel_clock > sense.pixel_clock_max) {
-			dev_err(ici->dev,
+			dev_err(ici->v4l2_dev.dev,
 				"pixel clock %lu set by the camera too high!",
 				sense.pixel_clock);
 			return -EIO;
@@ -1341,7 +1332,7 @@ static int pxa_camera_set_fmt(struct soc_camera_device *icd,
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
 	if (!xlate) {
-		dev_warn(ici->dev, "Format %x not found\n", pix->pixelformat);
+		dev_warn(ici->v4l2_dev.dev, "Format %x not found\n", pix->pixelformat);
 		return -EINVAL;
 	}
 
@@ -1352,16 +1343,16 @@ static int pxa_camera_set_fmt(struct soc_camera_device *icd,
 		icd->sense = &sense;
 
 	cam_f.fmt.pix.pixelformat = cam_fmt->fourcc;
-	ret = icd->ops->set_fmt(icd, &cam_f);
+	ret = v4l2_device_call_until_err(&ici->v4l2_dev, 0, video, s_fmt, f);
 
 	icd->sense = NULL;
 
 	if (ret < 0) {
-		dev_warn(ici->dev, "Failed to configure for format %x\n",
+		dev_warn(ici->v4l2_dev.dev, "Failed to configure for format %x\n",
 			 pix->pixelformat);
 	} else if (sense.flags & SOCAM_SENSE_PCLK_CHANGED) {
 		if (sense.pixel_clock > sense.pixel_clock_max) {
-			dev_err(ici->dev,
+			dev_err(ici->v4l2_dev.dev,
 				"pixel clock %lu set by the camera too high!",
 				sense.pixel_clock);
 			return -EIO;
@@ -1389,7 +1380,7 @@ static int pxa_camera_try_fmt(struct soc_camera_device *icd,
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
 	if (!xlate) {
-		dev_warn(ici->dev, "Format %x not found\n", pixfmt);
+		dev_warn(ici->v4l2_dev.dev, "Format %x not found\n", pixfmt);
 		return -EINVAL;
 	}
 
@@ -1410,7 +1401,7 @@ static int pxa_camera_try_fmt(struct soc_camera_device *icd,
 	/* camera has to see its format, but the user the original one */
 	pix->pixelformat = xlate->cam_fmt->fourcc;
 	/* limit to sensor capabilities */
-	ret = icd->ops->try_fmt(icd, f);
+	ret = v4l2_device_call_until_err(&ici->v4l2_dev, 0, video, try_fmt, f);
 	pix->pixelformat = xlate->host_fmt->fourcc;
 
 	field = pix->field;
@@ -1646,7 +1637,7 @@ static int __devinit pxa_camera_probe(struct platform_device *pdev)
 	pcdev->soc_host.drv_name	= PXA_CAM_DRV_NAME;
 	pcdev->soc_host.ops		= &pxa_soc_camera_host_ops;
 	pcdev->soc_host.priv		= pcdev;
-	pcdev->soc_host.dev		= &pdev->dev;
+	pcdev->soc_host.v4l2_dev.dev	= &pdev->dev;
 	pcdev->soc_host.nr		= pdev->id;
 
 	err = soc_camera_host_register(&pcdev->soc_host);
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index e7ac84daf67..5101fa7cdb2 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -347,10 +347,9 @@ static int sh_mobile_ceu_add_device(struct soc_camera_device *icd)
 {
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
-	int ret = -EBUSY;
 
 	if (pcdev->icd)
-		goto err;
+		return -EBUSY;
 
 	dev_info(&icd->dev,
 		 "SuperH Mobile CEU driver attached to camera %d\n",
@@ -358,19 +357,13 @@ static int sh_mobile_ceu_add_device(struct soc_camera_device *icd)
 
 	clk_enable(pcdev->clk);
 
-	ret = icd->ops->init(icd);
-	if (ret) {
-		clk_disable(pcdev->clk);
-		goto err;
-	}
-
 	ceu_write(pcdev, CAPSR, 1 << 16); /* reset */
 	while (ceu_read(pcdev, CSTSR) & 1)
 		msleep(1);
 
 	pcdev->icd = icd;
-err:
-	return ret;
+
+	return 0;
 }
 
 /* Called with .video_lock held */
@@ -396,8 +389,6 @@ static void sh_mobile_ceu_remove_device(struct soc_camera_device *icd)
 	}
 	spin_unlock_irqrestore(&pcdev->lock, flags);
 
-	icd->ops->release(icd);
-
 	clk_disable(pcdev->clk);
 
 	dev_info(&icd->dev,
@@ -614,7 +605,7 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, int idx,
 			xlate->cam_fmt = icd->formats + idx;
 			xlate->buswidth = icd->formats[idx].depth;
 			xlate++;
-			dev_dbg(ici->dev, "Providing format %s using %s\n",
+			dev_dbg(ici->v4l2_dev.dev, "Providing format %s using %s\n",
 				sh_mobile_ceu_formats[k].name,
 				icd->formats[idx].name);
 		}
@@ -627,7 +618,7 @@ add_single_format:
 			xlate->cam_fmt = icd->formats + idx;
 			xlate->buswidth = icd->formats[idx].depth;
 			xlate++;
-			dev_dbg(ici->dev,
+			dev_dbg(ici->v4l2_dev.dev,
 				"Providing format %s in pass-through mode\n",
 				icd->formats[idx].name);
 		}
@@ -649,18 +640,17 @@ static int sh_mobile_ceu_set_fmt(struct soc_camera_device *icd,
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
 	__u32 pixfmt = f->fmt.pix.pixelformat;
 	const struct soc_camera_format_xlate *xlate;
-	struct v4l2_format cam_f = *f;
 	int ret;
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
 	if (!xlate) {
-		dev_warn(ici->dev, "Format %x not found\n", pixfmt);
+		dev_warn(ici->v4l2_dev.dev, "Format %x not found\n", pixfmt);
 		return -EINVAL;
 	}
 
-	cam_f.fmt.pix.pixelformat = xlate->cam_fmt->fourcc;
-	ret = icd->ops->set_fmt(icd, &cam_f);
-
+	f->fmt.pix.pixelformat = xlate->cam_fmt->fourcc;
+	ret = v4l2_device_call_until_err(&ici->v4l2_dev, (__u32)icd, video, s_fmt, f);
+	f->fmt.pix.pixelformat = pixfmt;
 	if (!ret) {
 		icd->buswidth = xlate->buswidth;
 		icd->current_fmt = xlate->host_fmt;
@@ -681,7 +671,7 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd,
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
 	if (!xlate) {
-		dev_warn(ici->dev, "Format %x not found\n", pixfmt);
+		dev_warn(ici->v4l2_dev.dev, "Format %x not found\n", pixfmt);
 		return -EINVAL;
 	}
 
@@ -694,8 +684,11 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd,
 		DIV_ROUND_UP(xlate->host_fmt->depth, 8);
 	f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline;
 
+	f->fmt.pix.pixelformat = xlate->cam_fmt->fourcc;
+
 	/* limit to sensor capabilities */
-	ret = icd->ops->try_fmt(icd, f);
+	ret = v4l2_device_call_until_err(&ici->v4l2_dev, (__u32)icd, video, try_fmt, f);
+	f->fmt.pix.pixelformat = pixfmt;
 	if (ret < 0)
 		return ret;
 
@@ -771,7 +764,7 @@ static void sh_mobile_ceu_init_videobuf(struct videobuf_queue *q,
 
 	videobuf_queue_dma_contig_init(q,
 				       &sh_mobile_ceu_videobuf_ops,
-				       ici->dev, &pcdev->lock,
+				       ici->v4l2_dev.dev, &pcdev->lock,
 				       V4L2_BUF_TYPE_VIDEO_CAPTURE,
 				       pcdev->is_interlaced ?
 				       V4L2_FIELD_INTERLACED : V4L2_FIELD_NONE,
@@ -794,7 +787,7 @@ static struct soc_camera_host_ops sh_mobile_ceu_host_ops = {
 	.init_videobuf	= sh_mobile_ceu_init_videobuf,
 };
 
-static int sh_mobile_ceu_probe(struct platform_device *pdev)
+static int __devinit sh_mobile_ceu_probe(struct platform_device *pdev)
 {
 	struct sh_mobile_ceu_dev *pcdev;
 	struct resource *res;
@@ -867,7 +860,7 @@ static int sh_mobile_ceu_probe(struct platform_device *pdev)
 	pm_runtime_resume(&pdev->dev);
 
 	pcdev->ici.priv = pcdev;
-	pcdev->ici.dev = &pdev->dev;
+	pcdev->ici.v4l2_dev.dev = &pdev->dev;
 	pcdev->ici.nr = pdev->id;
 	pcdev->ici.drv_name = dev_name(&pdev->dev);
 	pcdev->ici.ops = &sh_mobile_ceu_host_ops;
@@ -891,7 +884,7 @@ exit:
 	return err;
 }
 
-static int sh_mobile_ceu_remove(struct platform_device *pdev)
+static int __devexit sh_mobile_ceu_remove(struct platform_device *pdev)
 {
 	struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev);
 	struct sh_mobile_ceu_dev *pcdev = container_of(soc_host,
@@ -929,7 +922,7 @@ static struct platform_driver sh_mobile_ceu_driver = {
 		.pm	= &sh_mobile_ceu_dev_pm_ops,
 	},
 	.probe		= sh_mobile_ceu_probe,
-	.remove		= sh_mobile_ceu_remove,
+	.remove		= __exit_p(sh_mobile_ceu_remove),
 };
 
 static int __init sh_mobile_ceu_init(void)
diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index 20ef5c773fa..0a1cb40bfbf 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -170,8 +170,6 @@ static int soc_camera_reqbufs(struct file *file, void *priv,
 
 	WARN_ON(priv != file->private_data);
 
-	dev_dbg(&icd->dev, "%s: %d\n", __func__, p->memory);
-
 	ret = videobuf_reqbufs(&icf->vb_vidq, p);
 	if (ret < 0)
 		return ret;
@@ -285,7 +283,7 @@ static int soc_camera_set_fmt(struct soc_camera_file *icf,
 		return ret;
 	} else if (!icd->current_fmt ||
 		   icd->current_fmt->fourcc != pix->pixelformat) {
-		dev_err(ici->dev,
+		dev_err(ici->v4l2_dev.dev,
 			"Host driver hasn't set up current format correctly!\n");
 		return -EINVAL;
 	}
@@ -308,20 +306,13 @@ static int soc_camera_set_fmt(struct soc_camera_file *icf,
 
 static int soc_camera_open(struct file *file)
 {
-	struct video_device *vdev;
-	struct soc_camera_device *icd;
+	struct video_device *vdev = video_devdata(file);
+	struct soc_camera_device *icd = container_of(vdev->parent, struct soc_camera_device, dev);
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
 	struct soc_camera_host *ici;
 	struct soc_camera_file *icf;
 	int ret;
 
-	/*
-	 * It is safe to dereference these pointers now as long as a user has
-	 * the video device open - we are protected by the held cdev reference.
-	 */
-
-	vdev = video_devdata(file);
-	icd = container_of(vdev->parent, struct soc_camera_device, dev);
-
 	if (!icd->ops)
 		/* No device driver attached */
 		return -ENODEV;
@@ -332,12 +323,6 @@ static int soc_camera_open(struct file *file)
 	if (!icf)
 		return -ENOMEM;
 
-	if (!try_module_get(icd->ops->owner)) {
-		dev_err(&icd->dev, "Couldn't lock sensor driver.\n");
-		ret = -EINVAL;
-		goto emgd;
-	}
-
 	if (!try_module_get(ici->ops->owner)) {
 		dev_err(&icd->dev, "Couldn't lock capture bus driver.\n");
 		ret = -EINVAL;
@@ -366,47 +351,65 @@ static int soc_camera_open(struct file *file)
 		if (ret < 0)
 			goto eiufmt;
 
-		dev_dbg(&icd->dev, "Using fmt %x\n", icd->current_fmt->fourcc);
-
 		f.fmt.pix.pixelformat	= icd->current_fmt->fourcc;
 		f.fmt.pix.colorspace	= icd->current_fmt->colorspace;
 
+		if (icl->power) {
+			ret = icl->power(icd->pdev, 1);
+			if (ret < 0)
+				goto epower;
+		}
+
+		/* The camera could have been already on, try to reset */
+		if (icl->reset)
+			icl->reset(icd->pdev);
+
 		ret = ici->ops->add(icd);
 		if (ret < 0) {
 			dev_err(&icd->dev, "Couldn't activate the camera: %d\n", ret);
 			goto eiciadd;
 		}
 
+		if (icd->ops->init) {
+			ret = icd->ops->init(icd);
+			if (ret < 0)
+				goto einit;
+		}
+
 		/* Try to configure with default parameters */
 		ret = soc_camera_set_fmt(icf, &f);
 		if (ret < 0)
 			goto esfmt;
 	}
 
-	mutex_unlock(&icd->video_lock);
-
 	file->private_data = icf;
 	dev_dbg(&icd->dev, "camera device open\n");
 
 	ici->ops->init_videobuf(&icf->vb_vidq, icd);
 
+	mutex_unlock(&icd->video_lock);
+
 	return 0;
 
 	/*
-	 * First three errors are entered with the .video_lock held
+	 * First five errors are entered with the .video_lock held
 	 * and use_count == 1
 	 */
 esfmt:
+	if (icd->ops->release)
+		icd->ops->release(icd);
+einit:
 	ici->ops->remove(icd);
 eiciadd:
+	if (icl->power)
+		icl->power(icd->pdev, 0);
+epower:
 	soc_camera_free_user_formats(icd);
 eiufmt:
 	icd->use_count--;
 	mutex_unlock(&icd->video_lock);
 	module_put(ici->ops->owner);
 emgi:
-	module_put(icd->ops->owner);
-emgd:
 	vfree(icf);
 	return ret;
 }
@@ -421,13 +424,18 @@ static int soc_camera_close(struct file *file)
 	mutex_lock(&icd->video_lock);
 	icd->use_count--;
 	if (!icd->use_count) {
+		struct soc_camera_link *icl = to_soc_camera_link(icd);
+
+		if (icd->ops->release)
+			icd->ops->release(icd);
 		ici->ops->remove(icd);
+		if (icl->power)
+			icl->power(icd->pdev, 0);
 		soc_camera_free_user_formats(icd);
 	}
 
 	mutex_unlock(&icd->video_lock);
 
-	module_put(icd->ops->owner);
 	module_put(ici->ops->owner);
 
 	vfree(icf);
@@ -575,18 +583,17 @@ static int soc_camera_streamon(struct file *file, void *priv,
 {
 	struct soc_camera_file *icf = file->private_data;
 	struct soc_camera_device *icd = icf->icd;
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	int ret;
 
 	WARN_ON(priv != file->private_data);
 
-	dev_dbg(&icd->dev, "%s\n", __func__);
-
 	if (i != V4L2_BUF_TYPE_VIDEO_CAPTURE)
 		return -EINVAL;
 
 	mutex_lock(&icd->video_lock);
 
-	icd->ops->start_capture(icd);
+	v4l2_device_call_until_err(&ici->v4l2_dev, (__u32)icd, video, s_stream, 1);
 
 	/* This calls buf_queue from host driver's videobuf_queue_ops */
 	ret = videobuf_streamon(&icf->vb_vidq);
@@ -601,11 +608,10 @@ static int soc_camera_streamoff(struct file *file, void *priv,
 {
 	struct soc_camera_file *icf = file->private_data;
 	struct soc_camera_device *icd = icf->icd;
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 
 	WARN_ON(priv != file->private_data);
 
-	dev_dbg(&icd->dev, "%s\n", __func__);
-
 	if (i != V4L2_BUF_TYPE_VIDEO_CAPTURE)
 		return -EINVAL;
 
@@ -615,7 +621,7 @@ static int soc_camera_streamoff(struct file *file, void *priv,
 	 * remaining buffers. When the last buffer is freed, stop capture */
 	videobuf_streamoff(&icf->vb_vidq);
 
-	icd->ops->stop_capture(icd);
+	v4l2_device_call_until_err(&ici->v4l2_dev, (__u32)icd, video, s_stream, 0);
 
 	mutex_unlock(&icd->video_lock);
 
@@ -649,6 +655,7 @@ static int soc_camera_g_ctrl(struct file *file, void *priv,
 {
 	struct soc_camera_file *icf = file->private_data;
 	struct soc_camera_device *icd = icf->icd;
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 
 	WARN_ON(priv != file->private_data);
 
@@ -665,9 +672,7 @@ static int soc_camera_g_ctrl(struct file *file, void *priv,
 		return 0;
 	}
 
-	if (icd->ops->get_control)
-		return icd->ops->get_control(icd, ctrl);
-	return -EINVAL;
+	return v4l2_device_call_until_err(&ici->v4l2_dev, (__u32)icd, core, g_ctrl, ctrl);
 }
 
 static int soc_camera_s_ctrl(struct file *file, void *priv,
@@ -675,12 +680,11 @@ static int soc_camera_s_ctrl(struct file *file, void *priv,
 {
 	struct soc_camera_file *icf = file->private_data;
 	struct soc_camera_device *icd = icf->icd;
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 
 	WARN_ON(priv != file->private_data);
 
-	if (icd->ops->set_control)
-		return icd->ops->set_control(icd, ctrl);
-	return -EINVAL;
+	return v4l2_device_call_until_err(&ici->v4l2_dev, (__u32)icd, core, s_ctrl, ctrl);
 }
 
 static int soc_camera_cropcap(struct file *file, void *fh,
@@ -751,11 +755,9 @@ static int soc_camera_g_chip_ident(struct file *file, void *fh,
 {
 	struct soc_camera_file *icf = file->private_data;
 	struct soc_camera_device *icd = icf->icd;
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 
-	if (!icd->ops->get_chip_id)
-		return -EINVAL;
-
-	return icd->ops->get_chip_id(icd, id);
+	return v4l2_device_call_until_err(&ici->v4l2_dev, (__u32)icd, core, g_chip_ident, id);
 }
 
 #ifdef CONFIG_VIDEO_ADV_DEBUG
@@ -764,11 +766,9 @@ static int soc_camera_g_register(struct file *file, void *fh,
 {
 	struct soc_camera_file *icf = file->private_data;
 	struct soc_camera_device *icd = icf->icd;
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 
-	if (!icd->ops->get_register)
-		return -EINVAL;
-
-	return icd->ops->get_register(icd, reg);
+	return v4l2_device_call_until_err(&ici->v4l2_dev, (__u32)icd, core, g_register, reg);
 }
 
 static int soc_camera_s_register(struct file *file, void *fh,
@@ -776,11 +776,9 @@ static int soc_camera_s_register(struct file *file, void *fh,
 {
 	struct soc_camera_file *icf = file->private_data;
 	struct soc_camera_device *icd = icf->icd;
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 
-	if (!icd->ops->set_register)
-		return -EINVAL;
-
-	return icd->ops->set_register(icd, reg);
+	return v4l2_device_call_until_err(&ici->v4l2_dev, (__u32)icd, core, s_register, reg);
 }
 #endif
 
@@ -794,7 +792,7 @@ static void scan_add_host(struct soc_camera_host *ici)
 	list_for_each_entry(icd, &devices, list) {
 		if (icd->iface == ici->nr) {
 			int ret;
-			icd->dev.parent = ici->dev;
+			icd->dev.parent = ici->v4l2_dev.dev;
 			dev_set_name(&icd->dev, "%u-%u", icd->iface,
 				     icd->devnum);
 			ret = device_register(&icd->dev);
@@ -814,7 +812,9 @@ static int soc_camera_init_i2c(struct soc_camera_device *icd,
 			       struct soc_camera_link *icl)
 {
 	struct i2c_client *client;
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	struct i2c_adapter *adap = i2c_get_adapter(icl->i2c_adapter_id);
+	struct v4l2_subdev *subdev;
 	int ret;
 
 	if (!adap) {
@@ -826,17 +826,16 @@ static int soc_camera_init_i2c(struct soc_camera_device *icd,
 
 	icl->board_info->platform_data = icd;
 
-	client = i2c_new_device(adap, icl->board_info);
-	if (!client) {
+	subdev = v4l2_i2c_new_subdev_board(&ici->v4l2_dev, adap,
+				icl->module_name, icl->board_info, NULL);
+	if (!subdev) {
 		ret = -ENOMEM;
 		goto ei2cnd;
 	}
 
-	/*
-	 * We set icd drvdata at two locations - here and in
-	 * soc_camera_video_start(). Depending on the module loading /
-	 * initialisation order one of these locations will be entered first
-	 */
+	subdev->grp_id = (__u32)icd;
+	client = subdev->priv;
+
 	/* Use to_i2c_client(dev) to recover the i2c client */
 	dev_set_drvdata(&icd->dev, &client->dev);
 
@@ -852,6 +851,7 @@ static void soc_camera_free_i2c(struct soc_camera_device *icd)
 	struct i2c_client *client =
 		to_i2c_client(to_soc_camera_control(icd));
 	dev_set_drvdata(&icd->dev, NULL);
+	v4l2_device_unregister_subdev(i2c_get_clientdata(client));
 	i2c_unregister_device(client);
 	i2c_put_adapter(client->adapter);
 }
@@ -860,16 +860,37 @@ static void soc_camera_free_i2c(struct soc_camera_device *icd)
 #define soc_camera_free_i2c(icd)	do {} while (0)
 #endif
 
+static int soc_camera_video_start(struct soc_camera_device *icd);
 static int video_dev_create(struct soc_camera_device *icd);
 /* Called during host-driver probe */
 static int soc_camera_probe(struct device *dev)
 {
 	struct soc_camera_device *icd = to_soc_camera_dev(dev);
+	struct soc_camera_host *ici = to_soc_camera_host(dev->parent);
 	struct soc_camera_link *icl = to_soc_camera_link(icd);
+	struct device *control = NULL;
 	int ret;
 
 	dev_info(dev, "Probing %s\n", dev_name(dev));
 
+	if (icl->power) {
+		ret = icl->power(icd->pdev, 1);
+		if (ret < 0) {
+			dev_err(dev,
+				"Platform failed to power-on the camera.\n");
+			goto epower;
+		}
+	}
+
+	/* The camera could have been already on, try to reset */
+	if (icl->reset)
+		icl->reset(icd->pdev);
+
+	ret = ici->ops->add(icd);
+	if (ret < 0)
+		goto eadd;
+
+	/* Must have icd->vdev before registering the device */
 	ret = video_dev_create(icd);
 	if (ret < 0)
 		goto evdc;
@@ -883,34 +904,61 @@ static int soc_camera_probe(struct device *dev)
 		ret = -EINVAL;
 		goto eadddev;
 	} else {
+		if (icl->module_name)
+			ret = request_module(icl->module_name);
+
 		ret = icl->add_device(icl, &icd->dev);
 		if (ret < 0)
 			goto eadddev;
-	}
 
-	ret = video_register_device(icd->vdev, VFL_TYPE_GRABBER, icd->vdev->minor);
-	if (ret < 0) {
-		dev_err(&icd->dev, "video_register_device failed: %d\n", ret);
-		goto evidregd;
+		/* FIXME: this is racy, have to use driver-binding notification */
+		control = to_soc_camera_control(icd);
+		if (!control || !control->driver ||
+		    !try_module_get(control->driver->owner)) {
+			icl->del_device(icl);
+			goto enodrv;
+		}
 	}
 
+	/* ..._video_start() will create a device node, so we have to protect */
+	mutex_lock(&icd->video_lock);
+
+	ret = soc_camera_video_start(icd);
+	if (ret < 0)
+		goto evidstart;
+
 	/* Do we have to sysfs_remove_link() before device_unregister()? */
 	if (to_soc_camera_control(icd) &&
 	    sysfs_create_link(&icd->dev.kobj, &to_soc_camera_control(icd)->kobj,
 			      "control"))
 		dev_warn(&icd->dev, "Failed creating the control symlink\n");
 
+	ici->ops->remove(icd);
+
+	if (icl->power)
+		icl->power(icd->pdev, 0);
+
+	mutex_unlock(&icd->video_lock);
 
 	return 0;
 
-evidregd:
-	if (icl->board_info)
+evidstart:
+	mutex_unlock(&icd->video_lock);
+	if (icl->board_info) {
 		soc_camera_free_i2c(icd);
-	else
+	} else {
 		icl->del_device(icl);
+		module_put(control->driver->owner);
+	}
+enodrv:
 eadddev:
 	video_device_release(icd->vdev);
 evdc:
+	ici->ops->remove(icd);
+eadd:
+	if (icl->power)
+		icl->power(icd->pdev, 0);
+epower:
 	return ret;
 }
 
@@ -931,10 +979,16 @@ static int soc_camera_remove(struct device *dev)
 		mutex_unlock(&icd->video_lock);
 	}
 
-	if (icl->board_info)
+	if (icl->board_info) {
 		soc_camera_free_i2c(icd);
-	else
-		icl->del_device(icl);
+	} else {
+		struct device_driver *drv = to_soc_camera_control(icd) ?
+			to_soc_camera_control(icd)->driver : NULL;
+		if (drv) {
+			icl->del_device(icl);
+			module_put(drv->owner);
+		}
+	}
 
 	return 0;
 }
@@ -984,6 +1038,7 @@ static void dummy_release(struct device *dev)
 int soc_camera_host_register(struct soc_camera_host *ici)
 {
 	struct soc_camera_host *ix;
+	int ret;
 
 	if (!ici || !ici->ops ||
 	    !ici->ops->try_fmt ||
@@ -996,18 +1051,20 @@ int soc_camera_host_register(struct soc_camera_host *ici)
 	    !ici->ops->add ||
 	    !ici->ops->remove ||
 	    !ici->ops->poll ||
-	    !ici->dev)
+	    !ici->v4l2_dev.dev)
 		return -EINVAL;
 
 	mutex_lock(&list_lock);
 	list_for_each_entry(ix, &hosts, list) {
 		if (ix->nr == ici->nr) {
-			mutex_unlock(&list_lock);
-			return -EBUSY;
+			ret = -EBUSY;
+			goto edevreg;
 		}
 	}
 
-	dev_set_drvdata(ici->dev, ici);
+	ret = v4l2_device_register(ici->v4l2_dev.dev, &ici->v4l2_dev);
+	if (ret < 0)
+		goto edevreg;
 
 	list_add_tail(&ici->list, &hosts);
 	mutex_unlock(&list_lock);
@@ -1015,6 +1072,10 @@ int soc_camera_host_register(struct soc_camera_host *ici)
 	scan_add_host(ici);
 
 	return 0;
+
+edevreg:
+	mutex_unlock(&list_lock);
+	return ret;
 }
 EXPORT_SYMBOL(soc_camera_host_register);
 
@@ -1028,7 +1089,7 @@ void soc_camera_host_unregister(struct soc_camera_host *ici)
 	list_del(&ici->list);
 
 	list_for_each_entry(icd, &devices, list) {
-		if (icd->dev.parent == ici->dev) {
+		if (icd->iface == ici->nr) {
 			/* The bus->remove will be called */
 			device_unregister(&icd->dev);
 			/* Not before device_unregister(), .remove
@@ -1043,7 +1104,7 @@ void soc_camera_host_unregister(struct soc_camera_host *ici)
 
 	mutex_unlock(&list_lock);
 
-	dev_set_drvdata(ici->dev, NULL);
+	v4l2_device_unregister(&ici->v4l2_dev);
 }
 EXPORT_SYMBOL(soc_camera_host_unregister);
 
@@ -1123,7 +1184,6 @@ static int video_dev_create(struct soc_camera_device *icd)
 
 	if (!vdev)
 		return -ENOMEM;
-	dev_dbg(ici->dev, "Allocated video_device %p\n", vdev);
 
 	strlcpy(vdev->name, ici->drv_name, sizeof(vdev->name));
 
@@ -1141,50 +1201,35 @@ static int video_dev_create(struct soc_camera_device *icd)
 }
 
 /*
- * Usually called from the struct soc_camera_ops .probe() method, i.e., from
- * soc_camera_probe() above with .video_lock held
+ * Called from soc_camera_probe() above (with .video_lock held???)
  */
-int soc_camera_video_start(struct soc_camera_device *icd, struct device *dev)
+static int soc_camera_video_start(struct soc_camera_device *icd)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	const struct v4l2_queryctrl *qctrl;
+	int ret;
 
 	if (!icd->dev.parent)
 		return -ENODEV;
 
 	if (!icd->ops ||
-	    !icd->ops->init ||
-	    !icd->ops->release ||
-	    !icd->ops->start_capture ||
-	    !icd->ops->stop_capture ||
-	    !icd->ops->set_fmt ||
-	    !icd->ops->try_fmt ||
 	    !icd->ops->query_bus_param ||
 	    !icd->ops->set_bus_param)
 		return -EINVAL;
 
-	/* See comment in soc_camera_probe() */
-	dev_set_drvdata(&icd->dev, dev);
+	ret = video_register_device(icd->vdev, VFL_TYPE_GRABBER,
+				    icd->vdev->minor);
+	if (ret < 0) {
+		dev_err(&icd->dev, "video_register_device failed: %d\n", ret);
+		return ret;
+	}
 
 	qctrl = soc_camera_find_qctrl(icd->ops, V4L2_CID_GAIN);
 	icd->gain = qctrl ? qctrl->default_value : (unsigned short)~0;
 	qctrl = soc_camera_find_qctrl(icd->ops, V4L2_CID_EXPOSURE);
 	icd->exposure = qctrl ? qctrl->default_value : (unsigned short)~0;
 
-	return ici->ops->add(icd);
-}
-EXPORT_SYMBOL(soc_camera_video_start);
-
-/* Called from client .remove() methods with .video_lock held */
-void soc_camera_video_stop(struct soc_camera_device *icd)
-{
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
-
-	dev_dbg(&icd->dev, "%s\n", __func__);
-
-	ici->ops->remove(icd);
+	return 0;
 }
-EXPORT_SYMBOL(soc_camera_video_stop);
 
 static int __devinit soc_camera_pdrv_probe(struct platform_device *pdev)
 {
@@ -1200,6 +1245,7 @@ static int __devinit soc_camera_pdrv_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	icd->iface = icl->bus_id;
+	icd->pdev = &pdev->dev;
 	platform_set_drvdata(pdev, icd);
 	icd->dev.platform_data = icl;
 
diff --git a/drivers/media/video/soc_camera_platform.c b/drivers/media/video/soc_camera_platform.c
index d84c134f8d5..8168cf470eb 100644
--- a/drivers/media/video/soc_camera_platform.c
+++ b/drivers/media/video/soc_camera_platform.c
@@ -16,11 +16,12 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/videodev2.h>
-#include <media/v4l2-common.h>
+#include <media/v4l2-subdev.h>
 #include <media/soc_camera.h>
 #include <media/soc_camera_platform.h>
 
 struct soc_camera_platform_priv {
+	struct v4l2_subdev subdev;
 	struct soc_camera_data_format format;
 };
 
@@ -31,36 +32,10 @@ soc_camera_platform_get_info(struct soc_camera_device *icd)
 	return pdev->dev.platform_data;
 }
 
-static int soc_camera_platform_init(struct soc_camera_device *icd)
+static int soc_camera_platform_s_stream(struct v4l2_subdev *sd, int enable)
 {
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
-
-	if (icl->power)
-		icl->power(dev_get_drvdata(&icd->dev), 1);
-
-	return 0;
-}
-
-static int soc_camera_platform_release(struct soc_camera_device *icd)
-{
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
-
-	if (icl->power)
-		icl->power(dev_get_drvdata(&icd->dev), 0);
-
-	return 0;
-}
-
-static int soc_camera_platform_start_capture(struct soc_camera_device *icd)
-{
-	struct soc_camera_platform_info *p = soc_camera_platform_get_info(icd);
-	return p->set_capture(p, 1);
-}
-
-static int soc_camera_platform_stop_capture(struct soc_camera_device *icd)
-{
-	struct soc_camera_platform_info *p = soc_camera_platform_get_info(icd);
-	return p->set_capture(p, 0);
+	struct soc_camera_platform_info *p = v4l2_get_subdevdata(sd);
+	return p->set_capture(p, enable);
 }
 
 static int soc_camera_platform_set_bus_param(struct soc_camera_device *icd,
@@ -82,16 +57,10 @@ static int soc_camera_platform_set_crop(struct soc_camera_device *icd,
 	return 0;
 }
 
-static int soc_camera_platform_set_fmt(struct soc_camera_device *icd,
+static int soc_camera_platform_try_fmt(struct v4l2_subdev *sd,
 				       struct v4l2_format *f)
 {
-	return 0;
-}
-
-static int soc_camera_platform_try_fmt(struct soc_camera_device *icd,
-				       struct v4l2_format *f)
-{
-	struct soc_camera_platform_info *p = soc_camera_platform_get_info(icd);
+	struct soc_camera_platform_info *p = v4l2_get_subdevdata(sd);
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 
 	pix->width = p->format.width;
@@ -99,12 +68,11 @@ static int soc_camera_platform_try_fmt(struct soc_camera_device *icd,
 	return 0;
 }
 
-static int soc_camera_platform_video_probe(struct soc_camera_device *icd,
-					   struct platform_device *pdev)
+static void soc_camera_platform_video_probe(struct soc_camera_device *icd,
+					    struct platform_device *pdev)
 {
 	struct soc_camera_platform_priv *priv = platform_get_drvdata(pdev);
 	struct soc_camera_platform_info *p = pdev->dev.platform_data;
-	int ret;
 
 	priv->format.name = p->format_name;
 	priv->format.depth = p->format_depth;
@@ -113,28 +81,29 @@ static int soc_camera_platform_video_probe(struct soc_camera_device *icd,
 
 	icd->formats = &priv->format;
 	icd->num_formats = 1;
-
-	/* ..._video_start() does dev_set_drvdata(&icd->dev, &pdev->dev) */
-	ret = soc_camera_video_start(icd, &pdev->dev);
-	soc_camera_video_stop(icd);
-	return ret;
 }
 
+static struct v4l2_subdev_core_ops platform_subdev_core_ops;
+
+static struct v4l2_subdev_video_ops platform_subdev_video_ops = {
+	.s_stream	= soc_camera_platform_s_stream,
+	.try_fmt	= soc_camera_platform_try_fmt,
+};
+
+static struct v4l2_subdev_ops platform_subdev_ops = {
+	.core	= &platform_subdev_core_ops,
+	.video	= &platform_subdev_video_ops,
+};
+
 static struct soc_camera_ops soc_camera_platform_ops = {
-	.owner			= THIS_MODULE,
-	.init			= soc_camera_platform_init,
-	.release		= soc_camera_platform_release,
-	.start_capture		= soc_camera_platform_start_capture,
-	.stop_capture		= soc_camera_platform_stop_capture,
 	.set_crop		= soc_camera_platform_set_crop,
-	.set_fmt		= soc_camera_platform_set_fmt,
-	.try_fmt		= soc_camera_platform_try_fmt,
 	.set_bus_param		= soc_camera_platform_set_bus_param,
 	.query_bus_param	= soc_camera_platform_query_bus_param,
 };
 
 static int soc_camera_platform_probe(struct platform_device *pdev)
 {
+	struct soc_camera_host *ici;
 	struct soc_camera_platform_priv *priv;
 	struct soc_camera_platform_info *p = pdev->dev.platform_data;
 	struct soc_camera_device *icd;
@@ -143,35 +112,48 @@ static int soc_camera_platform_probe(struct platform_device *pdev)
 	if (!p)
 		return -EINVAL;
 
+	if (!p->dev) {
+		dev_err(&pdev->dev,
+			"Platform has not set soc_camera_device pointer!\n");
+		return -EINVAL;
+	}
+
 	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 
-	platform_set_drvdata(pdev, priv);
-
 	icd = to_soc_camera_dev(p->dev);
-	if (!icd)
-		goto enoicd;
 
-	icd->ops	= &soc_camera_platform_ops;
+	platform_set_drvdata(pdev, priv);
 	dev_set_drvdata(&icd->dev, &pdev->dev);
+
 	icd->width_min	= 0;
 	icd->width_max	= p->format.width;
 	icd->height_min	= 0;
 	icd->height_max	= p->format.height;
 	icd->y_skip_top	= 0;
+	icd->ops	= &soc_camera_platform_ops;
 
-	ret = soc_camera_platform_video_probe(icd, pdev);
-	if (ret) {
-		icd->ops = NULL;
-		kfree(priv);
-	}
+	ici = to_soc_camera_host(icd->dev.parent);
+
+	soc_camera_platform_video_probe(icd, pdev);
+
+	v4l2_subdev_init(&priv->subdev, &platform_subdev_ops);
+	v4l2_set_subdevdata(&priv->subdev, p);
+	priv->subdev.grp_id = (__u32)icd;
+	strncpy(priv->subdev.name, dev_name(&pdev->dev), V4L2_SUBDEV_NAME_SIZE);
+
+	ret = v4l2_device_register_subdev(&ici->v4l2_dev, &priv->subdev);
+	if (ret)
+		goto evdrs;
 
 	return ret;
 
-enoicd:
+evdrs:
+	icd->ops = NULL;
+	platform_set_drvdata(pdev, NULL);
 	kfree(priv);
-	return -EINVAL;
+	return ret;
 }
 
 static int soc_camera_platform_remove(struct platform_device *pdev)
@@ -180,7 +162,9 @@ static int soc_camera_platform_remove(struct platform_device *pdev)
 	struct soc_camera_platform_info *p = pdev->dev.platform_data;
 	struct soc_camera_device *icd = to_soc_camera_dev(p->dev);
 
+	v4l2_device_unregister_subdev(&priv->subdev);
 	icd->ops = NULL;
+	platform_set_drvdata(pdev, NULL);
 	kfree(priv);
 	return 0;
 }
@@ -188,6 +172,7 @@ static int soc_camera_platform_remove(struct platform_device *pdev)
 static struct platform_driver soc_camera_platform_driver = {
 	.driver 	= {
 		.name	= "soc_camera_platform",
+		.owner	= THIS_MODULE,
 	},
 	.probe		= soc_camera_platform_probe,
 	.remove		= soc_camera_platform_remove,
diff --git a/drivers/media/video/tw9910.c b/drivers/media/video/tw9910.c
index d780a509faa..a006df1d28e 100644
--- a/drivers/media/video/tw9910.c
+++ b/drivers/media/video/tw9910.c
@@ -24,7 +24,7 @@
 #include <linux/delay.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-chip-ident.h>
-#include <media/v4l2-common.h>
+#include <media/v4l2-subdev.h>
 #include <media/soc_camera.h>
 #include <media/tw9910.h>
 
@@ -223,6 +223,7 @@ struct tw9910_hsync_ctrl {
 };
 
 struct tw9910_priv {
+	struct v4l2_subdev                subdev;
 	struct tw9910_video_info       *info;
 	const struct tw9910_scale_ctrl *scale;
 };
@@ -354,6 +355,11 @@ static const struct tw9910_hsync_ctrl tw9910_hsync_ctrl = {
 /*
  * general function
  */
+static struct tw9910_priv *to_tw9910(const struct i2c_client *client)
+{
+	return container_of(i2c_get_clientdata(client), struct tw9910_priv, subdev);
+}
+
 static int tw9910_set_scale(struct i2c_client *client,
 			    const struct tw9910_scale_ctrl *scale)
 {
@@ -507,47 +513,20 @@ tw9910_select_norm(struct soc_camera_device *icd, u32 width, u32 height)
 /*
  * soc_camera_ops function
  */
-static int tw9910_init(struct soc_camera_device *icd)
+static int tw9910_s_stream(struct v4l2_subdev *sd, int enable)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
-	int ret = 0;
+	struct i2c_client *client = sd->priv;
+	struct tw9910_priv *priv = to_tw9910(client);
 
-	if (icl->power) {
-		ret = icl->power(&client->dev, 1);
-		if (ret < 0)
-			return ret;
-	}
-
-	if (icl->reset)
-		ret = icl->reset(&client->dev);
-
-	return ret;
-}
-
-static int tw9910_release(struct soc_camera_device *icd)
-{
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
-	int ret = 0;
-
-	if (icl->power)
-		ret = icl->power(&client->dev, 0);
-
-	return ret;
-}
-
-static int tw9910_start_capture(struct soc_camera_device *icd)
-{
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct tw9910_priv *priv = i2c_get_clientdata(client);
+	if (!enable)
+		return 0;
 
 	if (!priv->scale) {
-		dev_err(&icd->dev, "norm select error\n");
+		dev_err(&client->dev, "norm select error\n");
 		return -EPERM;
 	}
 
-	dev_dbg(&icd->dev, "%s %dx%d\n",
+	dev_dbg(&client->dev, "%s %dx%d\n",
 		 priv->scale->name,
 		 priv->scale->width,
 		 priv->scale->height);
@@ -555,11 +534,6 @@ static int tw9910_start_capture(struct soc_camera_device *icd)
 	return 0;
 }
 
-static int tw9910_stop_capture(struct soc_camera_device *icd)
-{
-	return 0;
-}
-
 static int tw9910_set_bus_param(struct soc_camera_device *icd,
 				unsigned long flags)
 {
@@ -569,7 +543,7 @@ static int tw9910_set_bus_param(struct soc_camera_device *icd,
 static unsigned long tw9910_query_bus_param(struct soc_camera_device *icd)
 {
 	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct tw9910_priv *priv = i2c_get_clientdata(client);
+	struct tw9910_priv *priv = to_tw9910(client);
 	struct soc_camera_link *icl = to_soc_camera_link(icd);
 	unsigned long flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_MASTER |
 		SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_HIGH |
@@ -578,21 +552,11 @@ static unsigned long tw9910_query_bus_param(struct soc_camera_device *icd)
 	return soc_camera_apply_sensor_flags(icl, flags);
 }
 
-static int tw9910_get_chip_id(struct soc_camera_device *icd,
-			      struct v4l2_dbg_chip_ident *id)
-{
-	id->ident = V4L2_IDENT_TW9910;
-	id->revision = 0;
-
-	return 0;
-}
-
-static int tw9910_set_std(struct soc_camera_device *icd,
-			  v4l2_std_id *a)
+static int tw9910_s_std(struct v4l2_subdev *sd, v4l2_std_id norm)
 {
 	int ret = -EINVAL;
 
-	if (*a & (V4L2_STD_NTSC | V4L2_STD_PAL))
+	if (norm & (V4L2_STD_NTSC | V4L2_STD_PAL))
 		ret = 0;
 
 	return ret;
@@ -608,11 +572,20 @@ static int tw9910_enum_input(struct soc_camera_device *icd,
 	return 0;
 }
 
+static int tw9910_g_chip_ident(struct v4l2_subdev *sd,
+			       struct v4l2_dbg_chip_ident *id)
+{
+	id->ident = V4L2_IDENT_TW9910;
+	id->revision = 0;
+
+	return 0;
+}
+
 #ifdef CONFIG_VIDEO_ADV_DEBUG
-static int tw9910_get_register(struct soc_camera_device *icd,
-			       struct v4l2_dbg_register *reg)
+static int tw9910_g_register(struct v4l2_subdev *sd,
+			     struct v4l2_dbg_register *reg)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct i2c_client *client = sd->priv;
 	int ret;
 
 	if (reg->reg > 0xff)
@@ -630,10 +603,10 @@ static int tw9910_get_register(struct soc_camera_device *icd,
 	return 0;
 }
 
-static int tw9910_set_register(struct soc_camera_device *icd,
-			       struct v4l2_dbg_register *reg)
+static int tw9910_s_register(struct v4l2_subdev *sd,
+			     struct v4l2_dbg_register *reg)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct i2c_client *client = sd->priv;
 
 	if (reg->reg > 0xff ||
 	    reg->val > 0xff)
@@ -647,7 +620,7 @@ static int tw9910_set_crop(struct soc_camera_device *icd,
 			   struct v4l2_rect *rect)
 {
 	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct tw9910_priv *priv = i2c_get_clientdata(client);
+	struct tw9910_priv *priv = to_tw9910(client);
 	int                 ret  = -EINVAL;
 	u8                  val;
 
@@ -736,9 +709,10 @@ tw9910_set_fmt_error:
 	return ret;
 }
 
-static int tw9910_set_fmt(struct soc_camera_device *icd,
-			  struct v4l2_format *f)
+static int tw9910_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
 {
+	struct i2c_client *client = sd->priv;
+	struct soc_camera_device *icd = client->dev.platform_data;
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 	struct v4l2_rect rect = {
 		.left	= icd->x_current,
@@ -761,16 +735,17 @@ static int tw9910_set_fmt(struct soc_camera_device *icd,
 	return tw9910_set_crop(icd, &rect);
 }
 
-static int tw9910_try_fmt(struct soc_camera_device *icd,
-			  struct v4l2_format *f)
+static int tw9910_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
 {
+	struct i2c_client *client = sd->priv;
+	struct soc_camera_device *icd = client->dev.platform_data;
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 	const struct tw9910_scale_ctrl *scale;
 
 	if (V4L2_FIELD_ANY == pix->field) {
 		pix->field = V4L2_FIELD_INTERLACED;
 	} else if (V4L2_FIELD_INTERLACED != pix->field) {
-		dev_err(&icd->dev, "Field type invalid.\n");
+		dev_err(&client->dev, "Field type invalid.\n");
 		return -EINVAL;
 	}
 
@@ -790,9 +765,8 @@ static int tw9910_try_fmt(struct soc_camera_device *icd,
 static int tw9910_video_probe(struct soc_camera_device *icd,
 			      struct i2c_client *client)
 {
-	struct tw9910_priv *priv = i2c_get_clientdata(client);
+	struct tw9910_priv *priv = to_tw9910(client);
 	s32 val;
-	int ret;
 
 	/*
 	 * We must have a parent by now. And it cannot be a wrong one.
@@ -814,18 +788,11 @@ static int tw9910_video_probe(struct soc_camera_device *icd,
 	icd->formats     = tw9910_color_fmt;
 	icd->num_formats = ARRAY_SIZE(tw9910_color_fmt);
 
-	/* Switch master clock on */
-	ret = soc_camera_video_start(icd, &client->dev);
-	if (ret)
-		return ret;
-
 	/*
 	 * check and show Product ID
 	 */
 	val = i2c_smbus_read_byte_data(client, ID);
 
-	soc_camera_video_stop(icd);
-
 	if (0x0B != GET_ID(val) ||
 	    0x00 != GET_ReV(val)) {
 		dev_err(&icd->dev,
@@ -839,29 +806,36 @@ static int tw9910_video_probe(struct soc_camera_device *icd,
 	icd->vdev->tvnorms      = V4L2_STD_NTSC | V4L2_STD_PAL;
 	icd->vdev->current_norm = V4L2_STD_NTSC;
 
-	return ret;
+	return 0;
 }
 
 static struct soc_camera_ops tw9910_ops = {
-	.owner			= THIS_MODULE,
-	.init			= tw9910_init,
-	.release		= tw9910_release,
-	.start_capture		= tw9910_start_capture,
-	.stop_capture		= tw9910_stop_capture,
 	.set_crop		= tw9910_set_crop,
-	.set_fmt		= tw9910_set_fmt,
-	.try_fmt		= tw9910_try_fmt,
 	.set_bus_param		= tw9910_set_bus_param,
 	.query_bus_param	= tw9910_query_bus_param,
-	.get_chip_id		= tw9910_get_chip_id,
-	.set_std		= tw9910_set_std,
 	.enum_input		= tw9910_enum_input,
+};
+
+static struct v4l2_subdev_core_ops tw9910_subdev_core_ops = {
+	.g_chip_ident	= tw9910_g_chip_ident,
+	.s_std		= tw9910_s_std,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
-	.get_register		= tw9910_get_register,
-	.set_register		= tw9910_set_register,
+	.g_register	= tw9910_g_register,
+	.s_register	= tw9910_s_register,
 #endif
 };
 
+static struct v4l2_subdev_video_ops tw9910_subdev_video_ops = {
+	.s_stream	= tw9910_s_stream,
+	.s_fmt		= tw9910_s_fmt,
+	.try_fmt	= tw9910_try_fmt,
+};
+
+static struct v4l2_subdev_ops tw9910_subdev_ops = {
+	.core	= &tw9910_subdev_core_ops,
+	.video	= &tw9910_subdev_video_ops,
+};
+
 /*
  * i2c_driver function
  */
@@ -902,7 +876,8 @@ static int tw9910_probe(struct i2c_client *client,
 		return -ENOMEM;
 
 	priv->info   = info;
-	i2c_set_clientdata(client, priv);
+
+	v4l2_i2c_subdev_init(&priv->subdev, client, &tw9910_subdev_ops);
 
 	icd->ops     = &tw9910_ops;
 	icd->iface   = info->link.bus_id;
@@ -942,7 +917,7 @@ static int tw9910_probe(struct i2c_client *client,
 
 static int tw9910_remove(struct i2c_client *client)
 {
-	struct tw9910_priv *priv = i2c_get_clientdata(client);
+	struct tw9910_priv *priv = to_tw9910(client);
 	struct soc_camera_device *icd = client->dev.platform_data;
 
 	icd->ops = NULL;
-- 
cgit v1.2.3


From a813d01f823259d1b27668c2149785515843a7eb Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 25 Aug 2009 11:44:14 -0300
Subject: V4L/DVB (12512): ov772x: implement a band-stop filter support

The V4L2_CID_BAND_STOP_FILTER control is used to switch the "Banding Filter" on
OV772x cameras on and off and to set the minimum AEC value in BDBASE register.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/ov772x.c | 52 ++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 50 insertions(+), 2 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/ov772x.c b/drivers/media/video/ov772x.c
index 119159773a6..4c550f91ca2 100644
--- a/drivers/media/video/ov772x.c
+++ b/drivers/media/video/ov772x.c
@@ -403,8 +403,9 @@ struct ov772x_priv {
 	const struct ov772x_color_format *fmt;
 	const struct ov772x_win_size     *win;
 	int                               model;
-	unsigned int                      flag_vflip:1;
-	unsigned int                      flag_hflip:1;
+	unsigned short                    flag_vflip:1;
+	unsigned short                    flag_hflip:1;
+	unsigned short                    band_filter;	/* 256 - BDBASE, 0 if (!COM8[5]) */
 };
 
 #define ENDMARKER { 0xff, 0xff }
@@ -569,6 +570,15 @@ static const struct v4l2_queryctrl ov772x_controls[] = {
 		.step		= 1,
 		.default_value	= 0,
 	},
+	{
+		.id		= V4L2_CID_BAND_STOP_FILTER,
+		.type		= V4L2_CTRL_TYPE_INTEGER,
+		.name		= "Band-stop filter",
+		.minimum	= 0,
+		.maximum	= 256,
+		.step		= 1,
+		.default_value	= 0,
+	},
 };
 
 
@@ -674,6 +684,9 @@ static int ov772x_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 	case V4L2_CID_HFLIP:
 		ctrl->value = priv->flag_hflip;
 		break;
+	case V4L2_CID_BAND_STOP_FILTER:
+		ctrl->value = priv->band_filter;
+		break;
 	}
 	return 0;
 }
@@ -700,6 +713,29 @@ static int ov772x_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 			val ^= HFLIP_IMG;
 		ret = ov772x_mask_set(client, COM3, HFLIP_IMG, val);
 		break;
+	case V4L2_CID_BAND_STOP_FILTER:
+		if ((unsigned)ctrl->value > 256)
+			ctrl->value = 256;
+		if (ctrl->value == priv->band_filter)
+			break;
+		if (!ctrl->value) {
+			/* Switch the filter off, it is on now */
+			ret = ov772x_mask_set(client, BDBASE, 0xff, 0xff);
+			if (!ret)
+				ret = ov772x_mask_set(client, COM8,
+						      BNDF_ON_OFF, 0);
+		} else {
+			/* Switch the filter on, set AEC low limit */
+			val = 256 - ctrl->value;
+			ret = ov772x_mask_set(client, COM8,
+					      BNDF_ON_OFF, BNDF_ON_OFF);
+			if (!ret)
+				ret = ov772x_mask_set(client, BDBASE,
+						      0xff, val);
+		}
+		if (!ret)
+			priv->band_filter = ctrl->value;
+		break;
 	}
 
 	return ret;
@@ -893,6 +929,18 @@ static int ov772x_set_params(struct i2c_client *client,
 	if (ret < 0)
 		goto ov772x_set_fmt_error;
 
+	/*
+	 * set COM8
+	 */
+	if (priv->band_filter) {
+		ret = ov772x_mask_set(client, COM8, BNDF_ON_OFF, 1);
+		if (!ret)
+			ret = ov772x_mask_set(client, BDBASE,
+					      0xff, 256 - priv->band_filter);
+		if (ret < 0)
+			goto ov772x_set_fmt_error;
+	}
+
 	return ret;
 
 ov772x_set_fmt_error:
-- 
cgit v1.2.3


From 2840d2497b912f25d2957477faa1c922ddd733e0 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 25 Aug 2009 11:44:15 -0300
Subject: V4L/DVB (12513): soc-camera: add support for camera-host controls

Until now soc-camera only supported client (sensor) controls. This patch
enables camera-host drivers to implement their own controls too.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/soc_camera.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index 0a1cb40bfbf..b3fb8f290ad 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -633,6 +633,7 @@ static int soc_camera_queryctrl(struct file *file, void *priv,
 {
 	struct soc_camera_file *icf = file->private_data;
 	struct soc_camera_device *icd = icf->icd;
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	int i;
 
 	WARN_ON(priv != file->private_data);
@@ -640,6 +641,15 @@ static int soc_camera_queryctrl(struct file *file, void *priv,
 	if (!qc->id)
 		return -EINVAL;
 
+	/* First check host controls */
+	for (i = 0; i < ici->ops->num_controls; i++)
+		if (qc->id == ici->ops->controls[i].id) {
+			memcpy(qc, &(ici->ops->controls[i]),
+				sizeof(*qc));
+			return 0;
+		}
+
+	/* Then device controls */
 	for (i = 0; i < icd->ops->num_controls; i++)
 		if (qc->id == icd->ops->controls[i].id) {
 			memcpy(qc, &(icd->ops->controls[i]),
@@ -656,6 +666,7 @@ static int soc_camera_g_ctrl(struct file *file, void *priv,
 	struct soc_camera_file *icf = file->private_data;
 	struct soc_camera_device *icd = icf->icd;
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	int ret;
 
 	WARN_ON(priv != file->private_data);
 
@@ -672,6 +683,12 @@ static int soc_camera_g_ctrl(struct file *file, void *priv,
 		return 0;
 	}
 
+	if (ici->ops->get_ctrl) {
+		ret = ici->ops->get_ctrl(icd, ctrl);
+		if (ret != -ENOIOCTLCMD)
+			return ret;
+	}
+
 	return v4l2_device_call_until_err(&ici->v4l2_dev, (__u32)icd, core, g_ctrl, ctrl);
 }
 
@@ -681,9 +698,16 @@ static int soc_camera_s_ctrl(struct file *file, void *priv,
 	struct soc_camera_file *icf = file->private_data;
 	struct soc_camera_device *icd = icf->icd;
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	int ret;
 
 	WARN_ON(priv != file->private_data);
 
+	if (ici->ops->set_ctrl) {
+		ret = ici->ops->set_ctrl(icd, ctrl);
+		if (ret != -ENOIOCTLCMD)
+			return ret;
+	}
+
 	return v4l2_device_call_until_err(&ici->v4l2_dev, (__u32)icd, core, s_ctrl, ctrl);
 }
 
-- 
cgit v1.2.3


From 4a6110bc50da9a1883bf45614ac1d591253f0457 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 25 Aug 2009 11:44:15 -0300
Subject: V4L/DVB (12514): sh_mobile_ceu_camera: add a control for the camera
 low-pass filter

Use the V4L2_CID_SHARPNESS control to switch SH-mobile camera low-pass filter.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/sh_mobile_ceu_camera.c | 54 +++++++++++++++++++++++++++++-
 1 file changed, 53 insertions(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index 5101fa7cdb2..16fa56efaf9 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -495,7 +495,6 @@ static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd,
 	ceu_write(pcdev, CAPWR, (height << 16) | width);
 	ceu_write(pcdev, CFLCR, 0); /* no scaling */
 	ceu_write(pcdev, CFSZR, (height << 16) | cfszr_width);
-	ceu_write(pcdev, CLFCR, 0); /* no lowpass filter */
 
 	/* A few words about byte order (observed in Big Endian mode)
 	 *
@@ -772,6 +771,55 @@ static void sh_mobile_ceu_init_videobuf(struct videobuf_queue *q,
 				       icd);
 }
 
+static int sh_mobile_ceu_get_ctrl(struct soc_camera_device *icd,
+				  struct v4l2_control *ctrl)
+{
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct sh_mobile_ceu_dev *pcdev = ici->priv;
+	u32 val;
+
+	switch (ctrl->id) {
+	case V4L2_CID_SHARPNESS:
+		val = ceu_read(pcdev, CLFCR);
+		ctrl->value = val ^ 1;
+		return 0;
+	}
+	return -ENOIOCTLCMD;
+}
+
+static int sh_mobile_ceu_set_ctrl(struct soc_camera_device *icd,
+				  struct v4l2_control *ctrl)
+{
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct sh_mobile_ceu_dev *pcdev = ici->priv;
+
+	switch (ctrl->id) {
+	case V4L2_CID_SHARPNESS:
+		switch (icd->current_fmt->fourcc) {
+		case V4L2_PIX_FMT_NV12:
+		case V4L2_PIX_FMT_NV21:
+		case V4L2_PIX_FMT_NV16:
+		case V4L2_PIX_FMT_NV61:
+			ceu_write(pcdev, CLFCR, !ctrl->value);
+			return 0;
+		}
+		return -EINVAL;
+	}
+	return -ENOIOCTLCMD;
+}
+
+static const struct v4l2_queryctrl sh_mobile_ceu_controls[] = {
+	{
+		.id		= V4L2_CID_SHARPNESS,
+		.type		= V4L2_CTRL_TYPE_BOOLEAN,
+		.name		= "Low-pass filter",
+		.minimum	= 0,
+		.maximum	= 1,
+		.step		= 1,
+		.default_value	= 0,
+	},
+};
+
 static struct soc_camera_host_ops sh_mobile_ceu_host_ops = {
 	.owner		= THIS_MODULE,
 	.add		= sh_mobile_ceu_add_device,
@@ -780,11 +828,15 @@ static struct soc_camera_host_ops sh_mobile_ceu_host_ops = {
 	.set_crop	= sh_mobile_ceu_set_crop,
 	.set_fmt	= sh_mobile_ceu_set_fmt,
 	.try_fmt	= sh_mobile_ceu_try_fmt,
+	.set_ctrl	= sh_mobile_ceu_set_ctrl,
+	.get_ctrl	= sh_mobile_ceu_get_ctrl,
 	.reqbufs	= sh_mobile_ceu_reqbufs,
 	.poll		= sh_mobile_ceu_poll,
 	.querycap	= sh_mobile_ceu_querycap,
 	.set_bus_param	= sh_mobile_ceu_set_bus_param,
 	.init_videobuf	= sh_mobile_ceu_init_videobuf,
+	.controls	= sh_mobile_ceu_controls,
+	.num_controls	= ARRAY_SIZE(sh_mobile_ceu_controls),
 };
 
 static int __devinit sh_mobile_ceu_probe(struct platform_device *pdev)
-- 
cgit v1.2.3


From a0705b07f1816ae2b85388fcda71de69c221b4b8 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 25 Aug 2009 11:46:17 -0300
Subject: V4L/DVB (12515): soc-camera: use struct v4l2_rect in struct
 soc_camera_device

Switch to using struct v4l2_rect in struct soc_camera_device for uniformity and
simplicity.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/mt9m001.c              | 30 ++++++++-------
 drivers/media/video/mt9m111.c              | 20 +++++-----
 drivers/media/video/mt9t031.c              | 49 ++++++++++++-----------
 drivers/media/video/mt9v022.c              | 24 ++++++------
 drivers/media/video/mx1_camera.c           | 10 ++---
 drivers/media/video/mx3_camera.c           | 25 ++++++------
 drivers/media/video/ov772x.c               |  6 +--
 drivers/media/video/pxa_camera.c           | 14 +++----
 drivers/media/video/sh_mobile_ceu_camera.c | 28 ++++++++------
 drivers/media/video/soc_camera.c           | 62 +++++++++++++++++-------------
 drivers/media/video/soc_camera_platform.c  | 12 +++---
 drivers/media/video/tw9910.c               | 38 ++++++++++--------
 12 files changed, 172 insertions(+), 146 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/mt9m001.c b/drivers/media/video/mt9m001.c
index 2a73dac11d3..8b36a74b1be 100644
--- a/drivers/media/video/mt9m001.c
+++ b/drivers/media/video/mt9m001.c
@@ -240,8 +240,8 @@ static int mt9m001_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
 	struct i2c_client *client = sd->priv;
 	struct soc_camera_device *icd = client->dev.platform_data;
 	struct v4l2_rect rect = {
-		.left	= icd->x_current,
-		.top	= icd->y_current,
+		.left	= icd->rect_current.left,
+		.top	= icd->rect_current.top,
 		.width	= f->fmt.pix.width,
 		.height	= f->fmt.pix.height,
 	};
@@ -467,11 +467,13 @@ static int mt9m001_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 	case V4L2_CID_EXPOSURE_AUTO:
 		if (ctrl->value) {
 			const u16 vblank = 25;
-			if (reg_write(client, MT9M001_SHUTTER_WIDTH, icd->height +
+			if (reg_write(client, MT9M001_SHUTTER_WIDTH,
+				      icd->rect_current.height +
 				      icd->y_skip_top + vblank) < 0)
 				return -EIO;
 			qctrl = soc_camera_find_qctrl(icd->ops, V4L2_CID_EXPOSURE);
-			icd->exposure = (524 + (icd->height + icd->y_skip_top + vblank - 1) *
+			icd->exposure = (524 + (icd->rect_current.height +
+						icd->y_skip_top + vblank - 1) *
 					 (qctrl->maximum - qctrl->minimum)) /
 				1048 + qctrl->minimum;
 			mt9m001->autoexposure = 1;
@@ -613,16 +615,16 @@ static int mt9m001_probe(struct i2c_client *client,
 	v4l2_i2c_subdev_init(&mt9m001->subdev, client, &mt9m001_subdev_ops);
 
 	/* Second stage probe - when a capture adapter is there */
-	icd->ops	= &mt9m001_ops;
-	icd->x_min	= 20;
-	icd->y_min	= 12;
-	icd->x_current	= 20;
-	icd->y_current	= 12;
-	icd->width_min	= 48;
-	icd->width_max	= 1280;
-	icd->height_min	= 32;
-	icd->height_max	= 1024;
-	icd->y_skip_top	= 1;
+	icd->ops		= &mt9m001_ops;
+	icd->rect_max.left	= 20;
+	icd->rect_max.top	= 12;
+	icd->rect_max.width	= 1280;
+	icd->rect_max.height	= 1024;
+	icd->rect_current.left	= 20;
+	icd->rect_current.top	= 12;
+	icd->width_min		= 48;
+	icd->height_min		= 32;
+	icd->y_skip_top		= 1;
 	/* Simulated autoexposure. If enabled, we calculate shutter width
 	 * ourselves in the driver based on vertical blanking and frame width */
 	mt9m001->autoexposure = 1;
diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c
index 29f976afd46..45101fd90ce 100644
--- a/drivers/media/video/mt9m111.c
+++ b/drivers/media/video/mt9m111.c
@@ -948,16 +948,16 @@ static int mt9m111_probe(struct i2c_client *client,
 	v4l2_i2c_subdev_init(&mt9m111->subdev, client, &mt9m111_subdev_ops);
 
 	/* Second stage probe - when a capture adapter is there */
-	icd->ops	= &mt9m111_ops;
-	icd->x_min	= MT9M111_MIN_DARK_COLS;
-	icd->y_min	= MT9M111_MIN_DARK_ROWS;
-	icd->x_current	= icd->x_min;
-	icd->y_current	= icd->y_min;
-	icd->width_min	= MT9M111_MIN_DARK_ROWS;
-	icd->width_max	= MT9M111_MAX_WIDTH;
-	icd->height_min	= MT9M111_MIN_DARK_COLS;
-	icd->height_max	= MT9M111_MAX_HEIGHT;
-	icd->y_skip_top	= 0;
+	icd->ops		= &mt9m111_ops;
+	icd->rect_max.left	= MT9M111_MIN_DARK_COLS;
+	icd->rect_max.top	= MT9M111_MIN_DARK_ROWS;
+	icd->rect_max.width	= MT9M111_MAX_WIDTH;
+	icd->rect_max.height	= MT9M111_MAX_HEIGHT;
+	icd->rect_current.left	= icd->rect_max.left;
+	icd->rect_current.top	= icd->rect_max.top;
+	icd->width_min		= MT9M111_MIN_DARK_ROWS;
+	icd->height_min		= MT9M111_MIN_DARK_COLS;
+	icd->y_skip_top		= 0;
 
 	ret = mt9m111_video_probe(icd, client);
 	if (ret) {
diff --git a/drivers/media/video/mt9t031.c b/drivers/media/video/mt9t031.c
index 27a5edda902..dc3eb652a7c 100644
--- a/drivers/media/video/mt9t031.c
+++ b/drivers/media/video/mt9t031.c
@@ -222,12 +222,12 @@ static unsigned long mt9t031_query_bus_param(struct soc_camera_device *icd)
 static void recalculate_limits(struct soc_camera_device *icd,
 			       u16 xskip, u16 yskip)
 {
-	icd->x_min = (MT9T031_COLUMN_SKIP + xskip - 1) / xskip;
-	icd->y_min = (MT9T031_ROW_SKIP + yskip - 1) / yskip;
+	icd->rect_max.left = (MT9T031_COLUMN_SKIP + xskip - 1) / xskip;
+	icd->rect_max.top = (MT9T031_ROW_SKIP + yskip - 1) / yskip;
 	icd->width_min = (MT9T031_MIN_WIDTH + xskip - 1) / xskip;
 	icd->height_min = (MT9T031_MIN_HEIGHT + yskip - 1) / yskip;
-	icd->width_max = MT9T031_MAX_WIDTH / xskip;
-	icd->height_max = MT9T031_MAX_HEIGHT / yskip;
+	icd->rect_max.width = MT9T031_MAX_WIDTH / xskip;
+	icd->rect_max.height = MT9T031_MAX_HEIGHT / yskip;
 }
 
 static int mt9t031_set_params(struct soc_camera_device *icd,
@@ -241,11 +241,13 @@ static int mt9t031_set_params(struct soc_camera_device *icd,
 		vblank = MT9T031_VERTICAL_BLANK;
 
 	/* Make sure we don't exceed sensor limits */
-	if (rect->left + rect->width > icd->width_max)
-		rect->left = (icd->width_max - rect->width) / 2 + icd->x_min;
+	if (rect->left + rect->width > icd->rect_max.width)
+		rect->left = (icd->rect_max.width - rect->width) / 2 +
+			icd->rect_max.left;
 
-	if (rect->top + rect->height > icd->height_max)
-		rect->top = (icd->height_max - rect->height) / 2 + icd->y_min;
+	if (rect->top + rect->height > icd->rect_max.height)
+		rect->top = (icd->rect_max.height - rect->height) / 2 +
+			icd->rect_max.top;
 
 	width = rect->width * xskip;
 	height = rect->height * yskip;
@@ -346,8 +348,8 @@ static int mt9t031_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
 	int ret;
 	u16 xskip, yskip;
 	struct v4l2_rect rect = {
-		.left	= icd->x_current,
-		.top	= icd->y_current,
+		.left	= icd->rect_current.left,
+		.top	= icd->rect_current.top,
 		.width	= f->fmt.pix.width,
 		.height	= f->fmt.pix.height,
 	};
@@ -618,12 +620,13 @@ static int mt9t031_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 		if (ctrl->value) {
 			const u16 vblank = MT9T031_VERTICAL_BLANK;
 			const u32 shutter_max = MT9T031_MAX_HEIGHT + vblank;
-			if (set_shutter(client, icd->height +
+			if (set_shutter(client, icd->rect_current.height +
 					icd->y_skip_top + vblank) < 0)
 				return -EIO;
 			qctrl = soc_camera_find_qctrl(icd->ops, V4L2_CID_EXPOSURE);
-			icd->exposure = (shutter_max / 2 + (icd->height +
-					 icd->y_skip_top + vblank - 1) *
+			icd->exposure = (shutter_max / 2 +
+					 (icd->rect_current.height +
+					  icd->y_skip_top + vblank - 1) *
 					 (qctrl->maximum - qctrl->minimum)) /
 				shutter_max + qctrl->minimum;
 			mt9t031->autoexposure = 1;
@@ -726,16 +729,16 @@ static int mt9t031_probe(struct i2c_client *client,
 	v4l2_i2c_subdev_init(&mt9t031->subdev, client, &mt9t031_subdev_ops);
 
 	/* Second stage probe - when a capture adapter is there */
-	icd->ops	= &mt9t031_ops;
-	icd->x_min	= MT9T031_COLUMN_SKIP;
-	icd->y_min	= MT9T031_ROW_SKIP;
-	icd->x_current	= icd->x_min;
-	icd->y_current	= icd->y_min;
-	icd->width_min	= MT9T031_MIN_WIDTH;
-	icd->width_max	= MT9T031_MAX_WIDTH;
-	icd->height_min	= MT9T031_MIN_HEIGHT;
-	icd->height_max	= MT9T031_MAX_HEIGHT;
-	icd->y_skip_top	= 0;
+	icd->ops		= &mt9t031_ops;
+	icd->rect_max.left	= MT9T031_COLUMN_SKIP;
+	icd->rect_max.top	= MT9T031_ROW_SKIP;
+	icd->rect_current.left	= icd->rect_max.left;
+	icd->rect_current.top	= icd->rect_max.top;
+	icd->width_min		= MT9T031_MIN_WIDTH;
+	icd->rect_max.width	= MT9T031_MAX_WIDTH;
+	icd->height_min		= MT9T031_MIN_HEIGHT;
+	icd->rect_max.height	= MT9T031_MAX_HEIGHT;
+	icd->y_skip_top		= 0;
 	/* Simulated autoexposure. If enabled, we calculate shutter width
 	 * ourselves in the driver based on vertical blanking and frame width */
 	mt9t031->autoexposure = 1;
diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c
index 3cb9f0f1e25..d2b0981ec1c 100644
--- a/drivers/media/video/mt9v022.c
+++ b/drivers/media/video/mt9v022.c
@@ -298,8 +298,8 @@ static int mt9v022_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
 	struct soc_camera_device *icd = client->dev.platform_data;
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 	struct v4l2_rect rect = {
-		.left	= icd->x_current,
-		.top	= icd->y_current,
+		.left	= icd->rect_current.left,
+		.top	= icd->rect_current.top,
 		.width	= pix->width,
 		.height	= pix->height,
 	};
@@ -741,16 +741,16 @@ static int mt9v022_probe(struct i2c_client *client,
 
 	mt9v022->chip_control = MT9V022_CHIP_CONTROL_DEFAULT;
 
-	icd->ops	= &mt9v022_ops;
-	icd->x_min	= 1;
-	icd->y_min	= 4;
-	icd->x_current	= 1;
-	icd->y_current	= 4;
-	icd->width_min	= 48;
-	icd->width_max	= 752;
-	icd->height_min	= 32;
-	icd->height_max	= 480;
-	icd->y_skip_top	= 1;
+	icd->ops		= &mt9v022_ops;
+	icd->rect_max.left	= 1;
+	icd->rect_max.top	= 4;
+	icd->rect_max.width	= 752;
+	icd->rect_max.height	= 480;
+	icd->rect_current.left	= 1;
+	icd->rect_current.top	= 4;
+	icd->width_min		= 48;
+	icd->height_min		= 32;
+	icd->y_skip_top		= 1;
 
 	ret = mt9v022_video_probe(icd, client);
 	if (ret) {
diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c
index ea4ceaec85f..948a4714be9 100644
--- a/drivers/media/video/mx1_camera.c
+++ b/drivers/media/video/mx1_camera.c
@@ -126,7 +126,7 @@ static int mx1_videobuf_setup(struct videobuf_queue *vq, unsigned int *count,
 {
 	struct soc_camera_device *icd = vq->priv_data;
 
-	*size = icd->width * icd->height *
+	*size = icd->rect_current.width * icd->rect_current.height *
 		((icd->current_fmt->depth + 7) >> 3);
 
 	if (!*count)
@@ -178,12 +178,12 @@ static int mx1_videobuf_prepare(struct videobuf_queue *vq,
 	buf->inwork = 1;
 
 	if (buf->fmt	!= icd->current_fmt ||
-	    vb->width	!= icd->width ||
-	    vb->height	!= icd->height ||
+	    vb->width	!= icd->rect_current.width ||
+	    vb->height	!= icd->rect_current.height ||
 	    vb->field	!= field) {
 		buf->fmt	= icd->current_fmt;
-		vb->width	= icd->width;
-		vb->height	= icd->height;
+		vb->width	= icd->rect_current.width;
+		vb->height	= icd->rect_current.height;
 		vb->field	= field;
 		vb->state	= VIDEOBUF_NEEDS_INIT;
 	}
diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c
index 677d355be8f..6c3b7f9b906 100644
--- a/drivers/media/video/mx3_camera.c
+++ b/drivers/media/video/mx3_camera.c
@@ -220,7 +220,7 @@ static int mx3_videobuf_setup(struct videobuf_queue *vq, unsigned int *count,
 	if (!mx3_cam->idmac_channel[0])
 		return -EINVAL;
 
-	*size = icd->width * icd->height * bpp;
+	*size = icd->rect_current.width * icd->rect_current.height * bpp;
 
 	if (!*count)
 		*count = 32;
@@ -241,7 +241,7 @@ static int mx3_videobuf_prepare(struct videobuf_queue *vq,
 	struct mx3_camera_buffer *buf =
 		container_of(vb, struct mx3_camera_buffer, vb);
 	/* current_fmt _must_ always be set */
-	size_t new_size = icd->width * icd->height *
+	size_t new_size = icd->rect_current.width * icd->rect_current.height *
 		((icd->current_fmt->depth + 7) >> 3);
 	int ret;
 
@@ -251,12 +251,12 @@ static int mx3_videobuf_prepare(struct videobuf_queue *vq,
 	 */
 
 	if (buf->fmt	!= icd->current_fmt ||
-	    vb->width	!= icd->width ||
-	    vb->height	!= icd->height ||
+	    vb->width	!= icd->rect_current.width ||
+	    vb->height	!= icd->rect_current.height ||
 	    vb->field	!= field) {
 		buf->fmt	= icd->current_fmt;
-		vb->width	= icd->width;
-		vb->height	= icd->height;
+		vb->width	= icd->rect_current.width;
+		vb->height	= icd->rect_current.height;
 		vb->field	= field;
 		if (vb->state != VIDEOBUF_NEEDS_INIT)
 			free_buffer(vq, buf);
@@ -354,9 +354,9 @@ static void mx3_videobuf_queue(struct videobuf_queue *vq,
 
 	/* This is the configuration of one sg-element */
 	video->out_pixel_fmt	= fourcc_to_ipu_pix(data_fmt->fourcc);
-	video->out_width	= icd->width;
-	video->out_height	= icd->height;
-	video->out_stride	= icd->width;
+	video->out_width	= icd->rect_current.width;
+	video->out_height	= icd->rect_current.height;
+	video->out_stride	= icd->rect_current.width;
 
 #ifdef DEBUG
 	/* helps to see what DMA actually has written */
@@ -538,7 +538,8 @@ static bool channel_change_requested(struct soc_camera_device *icd,
 	struct idmac_channel *ichan = mx3_cam->idmac_channel[0];
 
 	/* Do buffers have to be re-allocated or channel re-configured? */
-	return ichan && rect->width * rect->height > icd->width * icd->height;
+	return ichan && rect->width * rect->height >
+		icd->rect_current.width * icd->rect_current.height;
 }
 
 static int test_platform_param(struct mx3_camera_dev *mx3_cam,
@@ -808,8 +809,8 @@ static int mx3_camera_set_fmt(struct soc_camera_device *icd,
 	const struct soc_camera_format_xlate *xlate;
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 	struct v4l2_rect rect = {
-		.left	= icd->x_current,
-		.top	= icd->y_current,
+		.left	= icd->rect_current.left,
+		.top	= icd->rect_current.top,
 		.width	= pix->width,
 		.height	= pix->height,
 	};
diff --git a/drivers/media/video/ov772x.c b/drivers/media/video/ov772x.c
index 4c550f91ca2..3417398e1b5 100644
--- a/drivers/media/video/ov772x.c
+++ b/drivers/media/video/ov772x.c
@@ -1120,9 +1120,9 @@ static int ov772x_probe(struct i2c_client *client,
 
 	v4l2_i2c_subdev_init(&priv->subdev, client, &ov772x_subdev_ops);
 
-	icd->ops        = &ov772x_ops;
-	icd->width_max  = MAX_WIDTH;
-	icd->height_max = MAX_HEIGHT;
+	icd->ops		= &ov772x_ops;
+	icd->rect_max.width	= MAX_WIDTH;
+	icd->rect_max.height	= MAX_HEIGHT;
 
 	ret = ov772x_video_probe(icd, client);
 	if (ret) {
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
index bdc0d85c461..0e4daaad2f4 100644
--- a/drivers/media/video/pxa_camera.c
+++ b/drivers/media/video/pxa_camera.c
@@ -239,7 +239,7 @@ static int pxa_videobuf_setup(struct videobuf_queue *vq, unsigned int *count,
 
 	dev_dbg(&icd->dev, "count=%d, size=%d\n", *count, *size);
 
-	*size = roundup(icd->width * icd->height *
+	*size = roundup(icd->rect_current.width * icd->rect_current.height *
 			((icd->current_fmt->depth + 7) >> 3), 8);
 
 	if (0 == *count)
@@ -443,12 +443,12 @@ static int pxa_videobuf_prepare(struct videobuf_queue *vq,
 	buf->inwork = 1;
 
 	if (buf->fmt	!= icd->current_fmt ||
-	    vb->width	!= icd->width ||
-	    vb->height	!= icd->height ||
+	    vb->width	!= icd->rect_current.width ||
+	    vb->height	!= icd->rect_current.height ||
 	    vb->field	!= field) {
 		buf->fmt	= icd->current_fmt;
-		vb->width	= icd->width;
-		vb->height	= icd->height;
+		vb->width	= icd->rect_current.width;
+		vb->height	= icd->rect_current.height;
 		vb->field	= field;
 		vb->state	= VIDEOBUF_NEEDS_INIT;
 	}
@@ -1118,7 +1118,7 @@ static int pxa_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
 	if (cicr0 & CICR0_ENB)
 		__raw_writel(cicr0 & ~CICR0_ENB, pcdev->base + CICR0);
 
-	cicr1 = CICR1_PPL_VAL(icd->width - 1) | bpp | dw;
+	cicr1 = CICR1_PPL_VAL(icd->rect_current.width - 1) | bpp | dw;
 
 	switch (pixfmt) {
 	case V4L2_PIX_FMT_YUV422P:
@@ -1147,7 +1147,7 @@ static int pxa_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
 	}
 
 	cicr2 = 0;
-	cicr3 = CICR3_LPF_VAL(icd->height - 1) |
+	cicr3 = CICR3_LPF_VAL(icd->rect_current.height - 1) |
 		CICR3_BFW_VAL(min((unsigned short)255, icd->y_skip_top));
 	cicr4 |= pcdev->mclk_divisor;
 
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index 16fa56efaf9..4c4b60c3226 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -146,7 +146,8 @@ static int sh_mobile_ceu_videobuf_setup(struct videobuf_queue *vq,
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
 	int bytes_per_pixel = (icd->current_fmt->depth + 7) >> 3;
 
-	*size = PAGE_ALIGN(icd->width * icd->height * bytes_per_pixel);
+	*size = PAGE_ALIGN(icd->rect_current.width * icd->rect_current.height *
+			   bytes_per_pixel);
 
 	if (0 == *count)
 		*count = 2;
@@ -205,7 +206,7 @@ static void sh_mobile_ceu_capture(struct sh_mobile_ceu_dev *pcdev)
 	phys_addr_top = videobuf_to_dma_contig(pcdev->active);
 	ceu_write(pcdev, CDAYR, phys_addr_top);
 	if (pcdev->is_interlaced) {
-		phys_addr_bottom = phys_addr_top + icd->width;
+		phys_addr_bottom = phys_addr_top + icd->rect_current.width;
 		ceu_write(pcdev, CDBYR, phys_addr_bottom);
 	}
 
@@ -214,10 +215,12 @@ static void sh_mobile_ceu_capture(struct sh_mobile_ceu_dev *pcdev)
 	case V4L2_PIX_FMT_NV21:
 	case V4L2_PIX_FMT_NV16:
 	case V4L2_PIX_FMT_NV61:
-		phys_addr_top += icd->width * icd->height;
+		phys_addr_top += icd->rect_current.width *
+			icd->rect_current.height;
 		ceu_write(pcdev, CDACR, phys_addr_top);
 		if (pcdev->is_interlaced) {
-			phys_addr_bottom = phys_addr_top + icd->width;
+			phys_addr_bottom = phys_addr_top +
+				icd->rect_current.width;
 			ceu_write(pcdev, CDBCR, phys_addr_bottom);
 		}
 	}
@@ -251,12 +254,12 @@ static int sh_mobile_ceu_videobuf_prepare(struct videobuf_queue *vq,
 	BUG_ON(NULL == icd->current_fmt);
 
 	if (buf->fmt	!= icd->current_fmt ||
-	    vb->width	!= icd->width ||
-	    vb->height	!= icd->height ||
+	    vb->width	!= icd->rect_current.width ||
+	    vb->height	!= icd->rect_current.height ||
 	    vb->field	!= field) {
 		buf->fmt	= icd->current_fmt;
-		vb->width	= icd->width;
-		vb->height	= icd->height;
+		vb->width	= icd->rect_current.width;
+		vb->height	= icd->rect_current.height;
 		vb->field	= field;
 		vb->state	= VIDEOBUF_NEEDS_INIT;
 	}
@@ -475,17 +478,18 @@ static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd,
 	mdelay(1);
 
 	if (yuv_mode) {
-		width = icd->width * 2;
+		width = icd->rect_current.width * 2;
 		width = buswidth == 16 ? width / 2 : width;
-		cfszr_width = cdwdr_width = icd->width;
+		cfszr_width = cdwdr_width = icd->rect_current.width;
 	} else {
-		width = icd->width * ((icd->current_fmt->depth + 7) >> 3);
+		width = icd->rect_current.width *
+			((icd->current_fmt->depth + 7) >> 3);
 		width = buswidth == 16 ? width / 2 : width;
 		cfszr_width = buswidth == 8 ? width / 2 : width;
 		cdwdr_width = buswidth == 16 ? width * 2 : width;
 	}
 
-	height = icd->height;
+	height = icd->rect_current.height;
 	if (pcdev->is_interlaced) {
 		height /= 2;
 		cdwdr_width *= 2;
diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index b3fb8f290ad..5028023b72a 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -288,17 +288,17 @@ static int soc_camera_set_fmt(struct soc_camera_file *icf,
 		return -EINVAL;
 	}
 
-	icd->width		= pix->width;
-	icd->height		= pix->height;
-	icf->vb_vidq.field	=
-		icd->field	= pix->field;
+	icd->rect_current.width		= pix->width;
+	icd->rect_current.height	= pix->height;
+	icf->vb_vidq.field		=
+		icd->field		= pix->field;
 
 	if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
 		dev_warn(&icd->dev, "Attention! Wrong buf-type %d\n",
 			 f->type);
 
 	dev_dbg(&icd->dev, "set width: %d height: %d\n",
-		icd->width, icd->height);
+		icd->rect_current.width, icd->rect_current.height);
 
 	/* set physical bus parameters */
 	return ici->ops->set_bus_param(icd, pix->pixelformat);
@@ -341,8 +341,8 @@ static int soc_camera_open(struct file *file)
 		struct v4l2_format f = {
 			.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
 			.fmt.pix = {
-				.width		= icd->width,
-				.height		= icd->height,
+				.width		= icd->rect_current.width,
+				.height		= icd->rect_current.height,
 				.field		= icd->field,
 			},
 		};
@@ -553,8 +553,8 @@ static int soc_camera_g_fmt_vid_cap(struct file *file, void *priv,
 
 	WARN_ON(priv != file->private_data);
 
-	pix->width		= icd->width;
-	pix->height		= icd->height;
+	pix->width		= icd->rect_current.width;
+	pix->height		= icd->rect_current.height;
 	pix->field		= icf->vb_vidq.field;
 	pix->pixelformat	= icd->current_fmt->fourcc;
 	pix->bytesperline	= pix->width *
@@ -718,12 +718,9 @@ static int soc_camera_cropcap(struct file *file, void *fh,
 	struct soc_camera_device *icd = icf->icd;
 
 	a->type				= V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	a->bounds.left			= icd->x_min;
-	a->bounds.top			= icd->y_min;
-	a->bounds.width			= icd->width_max;
-	a->bounds.height		= icd->height_max;
-	a->defrect.left			= icd->x_min;
-	a->defrect.top			= icd->y_min;
+	a->bounds			= icd->rect_max;
+	a->defrect.left			= icd->rect_max.left;
+	a->defrect.top			= icd->rect_max.top;
 	a->defrect.width		= DEFAULT_WIDTH;
 	a->defrect.height		= DEFAULT_HEIGHT;
 	a->pixelaspect.numerator	= 1;
@@ -738,11 +735,8 @@ static int soc_camera_g_crop(struct file *file, void *fh,
 	struct soc_camera_file *icf = file->private_data;
 	struct soc_camera_device *icd = icf->icd;
 
-	a->type		= V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	a->c.left	= icd->x_current;
-	a->c.top	= icd->y_current;
-	a->c.width	= icd->width;
-	a->c.height	= icd->height;
+	a->type	= V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	a->c	= icd->rect_current;
 
 	return 0;
 }
@@ -761,13 +755,29 @@ static int soc_camera_s_crop(struct file *file, void *fh,
 	/* Cropping is allowed during a running capture, guard consistency */
 	mutex_lock(&icf->vb_vidq.vb_lock);
 
+	if (a->c.width > icd->rect_max.width)
+		a->c.width = icd->rect_max.width;
+
+	if (a->c.width < icd->width_min)
+		a->c.width = icd->width_min;
+
+	if (a->c.height > icd->rect_max.height)
+		a->c.height = icd->rect_max.height;
+
+	if (a->c.height < icd->height_min)
+		a->c.height = icd->height_min;
+
+	if (a->c.width + a->c.left > icd->rect_max.width + icd->rect_max.left)
+		a->c.left = icd->rect_max.width + icd->rect_max.left -
+			a->c.width;
+
+	if (a->c.height + a->c.top > icd->rect_max.height + icd->rect_max.top)
+		a->c.top = icd->rect_max.height + icd->rect_max.top -
+			a->c.height;
+
 	ret = ici->ops->set_crop(icd, &a->c);
-	if (!ret) {
-		icd->width	= a->c.width;
-		icd->height	= a->c.height;
-		icd->x_current	= a->c.left;
-		icd->y_current	= a->c.top;
-	}
+	if (!ret)
+		icd->rect_current = a->c;
 
 	mutex_unlock(&icf->vb_vidq.vb_lock);
 
diff --git a/drivers/media/video/soc_camera_platform.c b/drivers/media/video/soc_camera_platform.c
index 8168cf470eb..9e406c113aa 100644
--- a/drivers/media/video/soc_camera_platform.c
+++ b/drivers/media/video/soc_camera_platform.c
@@ -127,12 +127,12 @@ static int soc_camera_platform_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, priv);
 	dev_set_drvdata(&icd->dev, &pdev->dev);
 
-	icd->width_min	= 0;
-	icd->width_max	= p->format.width;
-	icd->height_min	= 0;
-	icd->height_max	= p->format.height;
-	icd->y_skip_top	= 0;
-	icd->ops	= &soc_camera_platform_ops;
+	icd->width_min		= 0;
+	icd->rect_max.width	= p->format.width;
+	icd->height_min		= 0;
+	icd->rect_max.height	= p->format.height;
+	icd->y_skip_top		= 0;
+	icd->ops		= &soc_camera_platform_ops;
 
 	ici = to_soc_camera_host(icd->dev.parent);
 
diff --git a/drivers/media/video/tw9910.c b/drivers/media/video/tw9910.c
index a006df1d28e..7199e0f71b2 100644
--- a/drivers/media/video/tw9910.c
+++ b/drivers/media/video/tw9910.c
@@ -715,8 +715,8 @@ static int tw9910_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
 	struct soc_camera_device *icd = client->dev.platform_data;
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 	struct v4l2_rect rect = {
-		.left	= icd->x_current,
-		.top	= icd->y_current,
+		.left	= icd->rect_current.left,
+		.top	= icd->rect_current.top,
 		.width	= pix->width,
 		.height	= pix->height,
 	};
@@ -840,6 +840,19 @@ static struct v4l2_subdev_ops tw9910_subdev_ops = {
  * i2c_driver function
  */
 
+static void limit_to_scale(struct soc_camera_device *icd,
+			   const struct tw9910_scale_ctrl *scale)
+{
+	if (scale->width > icd->rect_max.width)
+		icd->rect_max.width  = scale->width;
+	if (scale->width < icd->width_min)
+		icd->width_min = scale->width;
+	if (scale->height > icd->rect_max.height)
+		icd->rect_max.height = scale->height;
+	if (scale->height < icd->height_min)
+		icd->height_min = scale->height;
+}
+
 static int tw9910_probe(struct i2c_client *client,
 			const struct i2c_device_id *did)
 
@@ -885,25 +898,18 @@ static int tw9910_probe(struct i2c_client *client,
 	/*
 	 * set width and height
 	 */
-	icd->width_max  = tw9910_ntsc_scales[0].width; /* set default */
+	icd->rect_max.width  = tw9910_ntsc_scales[0].width; /* set default */
 	icd->width_min  = tw9910_ntsc_scales[0].width;
-	icd->height_max = tw9910_ntsc_scales[0].height;
+	icd->rect_max.height = tw9910_ntsc_scales[0].height;
 	icd->height_min = tw9910_ntsc_scales[0].height;
 
 	scale = tw9910_ntsc_scales;
-	for (i = 0; i < ARRAY_SIZE(tw9910_ntsc_scales); i++) {
-		icd->width_max  = max(scale[i].width,  icd->width_max);
-		icd->width_min  = min(scale[i].width,  icd->width_min);
-		icd->height_max = max(scale[i].height, icd->height_max);
-		icd->height_min = min(scale[i].height, icd->height_min);
-	}
+	for (i = 0; i < ARRAY_SIZE(tw9910_ntsc_scales); i++)
+		limit_to_scale(icd, scale + i);
+
 	scale = tw9910_pal_scales;
-	for (i = 0; i < ARRAY_SIZE(tw9910_pal_scales); i++) {
-		icd->width_max  = max(scale[i].width,  icd->width_max);
-		icd->width_min  = min(scale[i].width,  icd->width_min);
-		icd->height_max = max(scale[i].height, icd->height_max);
-		icd->height_min = min(scale[i].height, icd->height_min);
-	}
+	for (i = 0; i < ARRAY_SIZE(tw9910_pal_scales); i++)
+		limit_to_scale(icd, scale + i);
 
 	ret = tw9910_video_probe(icd, client);
 	if (ret) {
-- 
cgit v1.2.3


From bf62e1da6ac848b0c3f72665d05939263e9f4128 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 25 Aug 2009 11:46:42 -0300
Subject: V4L/DVB (12516): ov772x: successful S_FMT and S_CROP must update
 user-provided rectangle

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/ov772x.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/ov772x.c b/drivers/media/video/ov772x.c
index 3417398e1b5..c0c549fa786 100644
--- a/drivers/media/video/ov772x.c
+++ b/drivers/media/video/ov772x.c
@@ -806,7 +806,7 @@ static const struct ov772x_win_size *ov772x_select_win(u32 width, u32 height)
 }
 
 static int ov772x_set_params(struct i2c_client *client,
-			     u32 width, u32 height, u32 pixfmt)
+			     u32 *width, u32 *height, u32 pixfmt)
 {
 	struct ov772x_priv *priv = to_ov772x(client);
 	int ret = -EINVAL;
@@ -829,7 +829,7 @@ static int ov772x_set_params(struct i2c_client *client,
 	/*
 	 * select win
 	 */
-	priv->win = ov772x_select_win(width, height);
+	priv->win = ov772x_select_win(*width, *height);
 
 	/*
 	 * reset hardware
@@ -941,6 +941,9 @@ static int ov772x_set_params(struct i2c_client *client,
 			goto ov772x_set_fmt_error;
 	}
 
+	*width = priv->win->width;
+	*height = priv->win->height;
+
 	return ret;
 
 ov772x_set_fmt_error:
@@ -961,7 +964,7 @@ static int ov772x_set_crop(struct soc_camera_device *icd,
 	if (!priv->fmt)
 		return -EINVAL;
 
-	return ov772x_set_params(client, rect->width, rect->height,
+	return ov772x_set_params(client, &rect->width, &rect->height,
 				 priv->fmt->fourcc);
 }
 
@@ -970,7 +973,7 @@ static int ov772x_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
 	struct i2c_client *client = sd->priv;
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 
-	return ov772x_set_params(client, pix->width, pix->height,
+	return ov772x_set_params(client, &pix->width, &pix->height,
 				 pix->pixelformat);
 }
 
-- 
cgit v1.2.3


From e330919a215714796efb451984a753a46b570eb7 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 25 Aug 2009 11:46:42 -0300
Subject: V4L/DVB (12517): mt9t031: improve rectangle placement in invalid
 S_CROP

1. soc-camera always requests a valid rectangle, when calling .s_fmt(), no need
to check and adjust
2. in .s_crop(), if the rectangle exceeds sensor limits, push it to the
respective border instead of centering
3. take into account left and top borders when checking

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/mt9t031.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/mt9t031.c b/drivers/media/video/mt9t031.c
index dc3eb652a7c..125973bf08b 100644
--- a/drivers/media/video/mt9t031.c
+++ b/drivers/media/video/mt9t031.c
@@ -240,15 +240,6 @@ static int mt9t031_set_params(struct soc_camera_device *icd,
 	const u16 hblank = MT9T031_HORIZONTAL_BLANK,
 		vblank = MT9T031_VERTICAL_BLANK;
 
-	/* Make sure we don't exceed sensor limits */
-	if (rect->left + rect->width > icd->rect_max.width)
-		rect->left = (icd->rect_max.width - rect->width) / 2 +
-			icd->rect_max.left;
-
-	if (rect->top + rect->height > icd->rect_max.height)
-		rect->top = (icd->rect_max.height - rect->height) / 2 +
-			icd->rect_max.top;
-
 	width = rect->width * xskip;
 	height = rect->height * yskip;
 	left = rect->left * xskip;
@@ -336,6 +327,15 @@ static int mt9t031_set_crop(struct soc_camera_device *icd,
 	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 	struct mt9t031 *mt9t031 = to_mt9t031(client);
 
+	/* Make sure we don't exceed sensor limits */
+	if (rect->left + rect->width > icd->rect_max.left + icd->rect_max.width)
+		rect->left = icd->rect_max.width + icd->rect_max.left -
+			rect->width;
+
+	if (rect->top + rect->height > icd->rect_max.height + icd->rect_max.top)
+		rect->top = icd->rect_max.height + icd->rect_max.top -
+			rect->height;
+
 	/* CROP - no change in scaling, or in limits */
 	return mt9t031_set_params(icd, rect, mt9t031->xskip, mt9t031->yskip);
 }
-- 
cgit v1.2.3


From 0d205b6a09177cd14c109321fb40873418a11f7e Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 25 Aug 2009 11:46:42 -0300
Subject: V4L/DVB (12518): ov772x: S_CROP must return actually configured
 geometry

V4L2 drivers are allowed to configure a geometry different than what has been
requested by the user with S_CROP, but then they have to adjust the input
rectangle accordingly. Fix ov772x to comply with this requirement.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/ov772x.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/ov772x.c b/drivers/media/video/ov772x.c
index c0c549fa786..b720558d8a2 100644
--- a/drivers/media/video/ov772x.c
+++ b/drivers/media/video/ov772x.c
@@ -960,12 +960,18 @@ static int ov772x_set_crop(struct soc_camera_device *icd,
 {
 	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 	struct ov772x_priv *priv = to_ov772x(client);
+	int ret;
 
 	if (!priv->fmt)
 		return -EINVAL;
 
-	return ov772x_set_params(client, &rect->width, &rect->height,
-				 priv->fmt->fourcc);
+	ret = ov772x_set_params(client, &rect->width, &rect->height,
+				priv->fmt->fourcc);
+	if (!ret) {
+		rect->left = 0;
+		rect->top = 0;
+	}
+	return ret;
 }
 
 static int ov772x_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
-- 
cgit v1.2.3


From fa48984e36ee73e964eeb994a45de6525114e871 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 25 Aug 2009 11:46:43 -0300
Subject: V4L/DVB (12519): soc-camera: put pixel format initialisation back in
 probe, add .put_formats()

The move of format translation initialisation into soc_camera_open() was
temporary for the soc-camera as platform driver intermediate step, put it back
into soc_camera_probe(). Also add a .put_formats() method to
soc_camera_host_ops to free any resources host driver might have allocated in
.get_formats().

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/soc_camera.c | 50 ++++++++++++++++++++++++++++------------
 1 file changed, 35 insertions(+), 15 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index 5028023b72a..aa6614b60d6 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -211,7 +211,7 @@ static int soc_camera_dqbuf(struct file *file, void *priv,
 static int soc_camera_init_user_formats(struct soc_camera_device *icd)
 {
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
-	int i, fmts = 0;
+	int i, fmts = 0, ret;
 
 	if (!ici->ops->get_formats)
 		/*
@@ -224,8 +224,12 @@ static int soc_camera_init_user_formats(struct soc_camera_device *icd)
 		 * First pass - only count formats this host-sensor
 		 * configuration can provide
 		 */
-		for (i = 0; i < icd->num_formats; i++)
-			fmts += ici->ops->get_formats(icd, i, NULL);
+		for (i = 0; i < icd->num_formats; i++) {
+			ret = ici->ops->get_formats(icd, i, NULL);
+			if (ret < 0)
+				return ret;
+			fmts += ret;
+		}
 
 	if (!fmts)
 		return -ENXIO;
@@ -247,19 +251,32 @@ static int soc_camera_init_user_formats(struct soc_camera_device *icd)
 			icd->user_formats[i].cam_fmt = icd->formats + i;
 			icd->user_formats[i].buswidth = icd->formats[i].depth;
 		} else {
-			fmts += ici->ops->get_formats(icd, i,
-						      &icd->user_formats[fmts]);
+			ret = ici->ops->get_formats(icd, i,
+						    &icd->user_formats[fmts]);
+			if (ret < 0)
+				goto egfmt;
+			fmts += ret;
 		}
 
 	icd->current_fmt = icd->user_formats[0].host_fmt;
 
 	return 0;
+
+egfmt:
+	icd->num_user_formats = 0;
+	vfree(icd->user_formats);
+	return ret;
 }
 
 /* Always entered with .video_lock held */
 static void soc_camera_free_user_formats(struct soc_camera_device *icd)
 {
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+
+	if (ici->ops->put_formats)
+		ici->ops->put_formats(icd);
 	icd->current_fmt = NULL;
+	icd->num_user_formats = 0;
 	vfree(icd->user_formats);
 	icd->user_formats = NULL;
 }
@@ -344,16 +361,11 @@ static int soc_camera_open(struct file *file)
 				.width		= icd->rect_current.width,
 				.height		= icd->rect_current.height,
 				.field		= icd->field,
+				.pixelformat	= icd->current_fmt->fourcc,
+				.colorspace	= icd->current_fmt->colorspace,
 			},
 		};
 
-		ret = soc_camera_init_user_formats(icd);
-		if (ret < 0)
-			goto eiufmt;
-
-		f.fmt.pix.pixelformat	= icd->current_fmt->fourcc;
-		f.fmt.pix.colorspace	= icd->current_fmt->colorspace;
-
 		if (icl->power) {
 			ret = icl->power(icd->pdev, 1);
 			if (ret < 0)
@@ -404,8 +416,6 @@ eiciadd:
 	if (icl->power)
 		icl->power(icd->pdev, 0);
 epower:
-	soc_camera_free_user_formats(icd);
-eiufmt:
 	icd->use_count--;
 	mutex_unlock(&icd->video_lock);
 	module_put(ici->ops->owner);
@@ -431,7 +441,6 @@ static int soc_camera_close(struct file *file)
 		ici->ops->remove(icd);
 		if (icl->power)
 			icl->power(icd->pdev, 0);
-		soc_camera_free_user_formats(icd);
 	}
 
 	mutex_unlock(&icd->video_lock);
@@ -954,6 +963,14 @@ static int soc_camera_probe(struct device *dev)
 		}
 	}
 
+	/* At this point client .probe() should have run already */
+	ret = soc_camera_init_user_formats(icd);
+	if (ret < 0)
+		goto eiufmt;
+
+	icd->rect_current = icd->rect_max;
+	icd->field = V4L2_FIELD_ANY;
+
 	/* ..._video_start() will create a device node, so we have to protect */
 	mutex_lock(&icd->video_lock);
 
@@ -978,6 +995,8 @@ static int soc_camera_probe(struct device *dev)
 
 evidstart:
 	mutex_unlock(&icd->video_lock);
+	soc_camera_free_user_formats(icd);
+eiufmt:
 	if (icl->board_info) {
 		soc_camera_free_i2c(icd);
 	} else {
@@ -1023,6 +1042,7 @@ static int soc_camera_remove(struct device *dev)
 			module_put(drv->owner);
 		}
 	}
+	soc_camera_free_user_formats(icd);
 
 	return 0;
 }
-- 
cgit v1.2.3


From cca0e54905259a456d97652d4f1e2fe8b188b6ad Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 25 Aug 2009 11:46:51 -0300
Subject: V4L/DVB (12520): sh-mobile-ceu-camera: do not wait for interrupt when
 releasing buffers

Patch

[PATCH] video: use videobuf_waiton() in sh_mobile_ceu free_buffer()

was not quite correct. It closed a race, but introduced a potential
lock-up, if for some reason an interrupt does not come. This has been
observed in tests with tw9910. This patch safely dequeues buffers without
waiting for their completion. It also moves a buffer state assignment
under a spinlock to make it atomic with queuing of the buffer.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/sh_mobile_ceu_camera.c | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index 4c4b60c3226..c0dc4a1e8e5 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -307,6 +307,27 @@ static void sh_mobile_ceu_videobuf_queue(struct videobuf_queue *vq,
 static void sh_mobile_ceu_videobuf_release(struct videobuf_queue *vq,
 					   struct videobuf_buffer *vb)
 {
+	struct soc_camera_device *icd = vq->priv_data;
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct sh_mobile_ceu_dev *pcdev = ici->priv;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pcdev->lock, flags);
+
+	if (pcdev->active == vb) {
+		/* disable capture (release DMA buffer), reset */
+		ceu_write(pcdev, CAPSR, 1 << 16);
+		pcdev->active = NULL;
+	}
+
+	if ((vb->state == VIDEOBUF_ACTIVE || vb->state == VIDEOBUF_QUEUED) &&
+	    !list_empty(&vb->queue)) {
+		vb->state = VIDEOBUF_ERROR;
+		list_del_init(&vb->queue);
+	}
+
+	spin_unlock_irqrestore(&pcdev->lock, flags);
+
 	free_buffer(vq, container_of(vb, struct sh_mobile_ceu_buffer, vb));
 }
 
@@ -326,6 +347,10 @@ static irqreturn_t sh_mobile_ceu_irq(int irq, void *data)
 	spin_lock_irqsave(&pcdev->lock, flags);
 
 	vb = pcdev->active;
+	if (!vb)
+		/* Stale interrupt from a released buffer */
+		goto out;
+
 	list_del_init(&vb->queue);
 
 	if (!list_empty(&pcdev->capture))
@@ -340,6 +365,8 @@ static irqreturn_t sh_mobile_ceu_irq(int irq, void *data)
 	do_gettimeofday(&vb->ts);
 	vb->field_count++;
 	wake_up(&vb->done);
+
+out:
 	spin_unlock_irqrestore(&pcdev->lock, flags);
 
 	return IRQ_HANDLED;
-- 
cgit v1.2.3


From a12222a73e7a9efd927eb99d1dec1cedc9887e0a Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 25 Aug 2009 11:46:51 -0300
Subject: V4L/DVB (12521): soc-camera: use .s_std() from struct
 v4l2_subdev_core_ops

Remove .set_std() method from struct soc_camera_ops, use .s_std() from
struct v4l2_subdev_core_ops instead.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/soc_camera.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index aa6614b60d6..44a94dc934f 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -152,12 +152,9 @@ static int soc_camera_s_std(struct file *file, void *priv, v4l2_std_id *a)
 {
 	struct soc_camera_file *icf = file->private_data;
 	struct soc_camera_device *icd = icf->icd;
-	int ret = 0;
-
-	if (icd->ops->set_std)
-		ret = icd->ops->set_std(icd, a);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 
-	return ret;
+	return v4l2_device_call_until_err(&ici->v4l2_dev, (__u32)icd, core, s_std, *a);
 }
 
 static int soc_camera_reqbufs(struct file *file, void *priv,
-- 
cgit v1.2.3


From 904078f16fab80ed1f6adf7f6a0bd166d6b58d07 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 25 Aug 2009 11:46:52 -0300
Subject: V4L/DVB (12522): sh-mobile-ceu-camera: implement host-side cropping

Not all video capture devices can configure arbitrary cropping, whereas the
CEU module on SuperH CPUs can crop with pixel precision. However, we want to
use camera cropping if possible to save bandwidth and increase the frame-rate.
This patch verifies whether the camera managed to crop exactly the requested
rectangle, and if not, uses host-side cropping. To be able to crop on CEU we
have to preserve camera rectangle too, for which the host_priv member in
struct soc_camera_device is used. We now allocate memory dynamically, thus we
have to use the .put_formats() method from struct soc_camera_host_ops to free
it.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/sh_mobile_ceu_camera.c | 309 ++++++++++++++++++++++++-----
 1 file changed, 259 insertions(+), 50 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index c0dc4a1e8e5..3fee7c01fd5 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -92,10 +92,17 @@ struct sh_mobile_ceu_dev {
 	spinlock_t lock;
 	struct list_head capture;
 	struct videobuf_buffer *active;
-	int is_interlaced;
 
 	struct sh_mobile_ceu_info *pdata;
 
+	unsigned int is_interlaced:1;
+	unsigned int image_mode:1;
+	unsigned int is_16bit:1;
+};
+
+struct sh_mobile_ceu_cam {
+	struct v4l2_rect camera_rect;
+	const struct soc_camera_data_format *extra_fmt;
 	const struct soc_camera_data_format *camera_fmt;
 };
 
@@ -428,14 +435,101 @@ static void sh_mobile_ceu_remove_device(struct soc_camera_device *icd)
 	pcdev->icd = NULL;
 }
 
+static void sh_mobile_ceu_set_rect(struct soc_camera_device *icd,
+				   struct v4l2_rect *rect)
+{
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct sh_mobile_ceu_cam *cam = icd->host_priv;
+	struct sh_mobile_ceu_dev *pcdev = ici->priv;
+	int width, height, cfszr_width, cdwdr_width;
+	unsigned int left_offset, top_offset;
+	u32 camor;
+
+	if (rect->left > cam->camera_rect.left) {
+		left_offset = rect->left - cam->camera_rect.left;
+	} else {
+		left_offset = 0;
+		rect->left = cam->camera_rect.left;
+	}
+
+	if (rect->top > cam->camera_rect.top) {
+		top_offset = rect->top - cam->camera_rect.top;
+	} else {
+		top_offset = 0;
+		rect->top = cam->camera_rect.top;
+	}
+
+	dev_dbg(&icd->dev, "Offsets %u:%u\n", left_offset, top_offset);
+
+	if (pcdev->image_mode) {
+		width = rect->width;
+		if (!pcdev->is_16bit)
+			width *= 2;
+		cfszr_width = cdwdr_width = rect->width;
+	} else {
+		width = rect->width *
+			((icd->current_fmt->depth + 7) >> 3);
+		width = pcdev->is_16bit ? width / 2 : width;
+		cfszr_width = pcdev->is_16bit ? width : width / 2;
+		cdwdr_width = pcdev->is_16bit ? width * 2 : width;
+	}
+
+	height = rect->height;
+	if (pcdev->is_interlaced) {
+		height /= 2;
+		cdwdr_width *= 2;
+	}
+
+	camor = left_offset | (top_offset << 16);
+	ceu_write(pcdev, CAMOR, camor);
+	ceu_write(pcdev, CAPWR, (height << 16) | width);
+	ceu_write(pcdev, CFSZR, (height << 16) | cfszr_width);
+	ceu_write(pcdev, CDWDR, cdwdr_width);
+}
+
+static u32 capture_save_reset(struct sh_mobile_ceu_dev *pcdev)
+{
+	u32 capsr = ceu_read(pcdev, CAPSR);
+	ceu_write(pcdev, CAPSR, 1 << 16); /* reset, stop capture */
+	return capsr;
+}
+
+static void capture_restore(struct sh_mobile_ceu_dev *pcdev, u32 capsr)
+{
+	unsigned long timeout = jiffies + 10 * HZ;
+
+	/*
+	 * Wait until the end of the current frame. It can take a long time,
+	 * but if it has been aborted by a CAPSR reset, it shoule exit sooner.
+	 */
+	while ((ceu_read(pcdev, CSTSR) & 1) && time_before(jiffies, timeout))
+		msleep(1);
+
+	if (time_after(jiffies, timeout)) {
+		dev_err(pcdev->ici.v4l2_dev.dev,
+			"Timeout waiting for frame end! Interface problem?\n");
+		return;
+	}
+
+	/* Wait until reset clears, this shall not hang... */
+	while (ceu_read(pcdev, CAPSR) & (1 << 16))
+		udelay(10);
+
+	/* Anything to restore? */
+	if (capsr & ~(1 << 16))
+		ceu_write(pcdev, CAPSR, capsr);
+}
+
 static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd,
 				       __u32 pixfmt)
 {
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
-	int ret, buswidth, width, height, cfszr_width, cdwdr_width;
+	int ret;
 	unsigned long camera_flags, common_flags, value;
-	int yuv_mode, yuv_lineskip;
+	int yuv_lineskip;
+	struct sh_mobile_ceu_cam *cam = icd->host_priv;
+	u32 capsr = capture_save_reset(pcdev);
 
 	camera_flags = icd->ops->query_bus_param(icd);
 	common_flags = soc_camera_bus_param_compatible(camera_flags,
@@ -449,10 +543,10 @@ static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd,
 
 	switch (common_flags & SOCAM_DATAWIDTH_MASK) {
 	case SOCAM_DATAWIDTH_8:
-		buswidth = 8;
+		pcdev->is_16bit = 0;
 		break;
 	case SOCAM_DATAWIDTH_16:
-		buswidth = 16;
+		pcdev->is_16bit = 1;
 		break;
 	default:
 		return -EINVAL;
@@ -462,7 +556,7 @@ static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd,
 	ceu_write(pcdev, CRCMPR, 0);
 
 	value = 0x00000010; /* data fetch by default */
-	yuv_mode = yuv_lineskip = 0;
+	pcdev->image_mode = yuv_lineskip = 0;
 
 	switch (icd->current_fmt->fourcc) {
 	case V4L2_PIX_FMT_NV12:
@@ -471,8 +565,8 @@ static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd,
 		/* fall-through */
 	case V4L2_PIX_FMT_NV16:
 	case V4L2_PIX_FMT_NV61:
-		yuv_mode = 1;
-		switch (pcdev->camera_fmt->fourcc) {
+		pcdev->image_mode = 1;
+		switch (cam->camera_fmt->fourcc) {
 		case V4L2_PIX_FMT_UYVY:
 			value = 0x00000000; /* Cb0, Y0, Cr0, Y1 */
 			break;
@@ -496,36 +590,16 @@ static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd,
 
 	value |= common_flags & SOCAM_VSYNC_ACTIVE_LOW ? 1 << 1 : 0;
 	value |= common_flags & SOCAM_HSYNC_ACTIVE_LOW ? 1 << 0 : 0;
-	value |= buswidth == 16 ? 1 << 12 : 0;
+	value |= pcdev->is_16bit ? 1 << 12 : 0;
 	ceu_write(pcdev, CAMCR, value);
 
 	ceu_write(pcdev, CAPCR, 0x00300000);
 	ceu_write(pcdev, CAIFR, pcdev->is_interlaced ? 0x101 : 0);
 
 	mdelay(1);
+	sh_mobile_ceu_set_rect(icd, &icd->rect_current);
 
-	if (yuv_mode) {
-		width = icd->rect_current.width * 2;
-		width = buswidth == 16 ? width / 2 : width;
-		cfszr_width = cdwdr_width = icd->rect_current.width;
-	} else {
-		width = icd->rect_current.width *
-			((icd->current_fmt->depth + 7) >> 3);
-		width = buswidth == 16 ? width / 2 : width;
-		cfszr_width = buswidth == 8 ? width / 2 : width;
-		cdwdr_width = buswidth == 16 ? width * 2 : width;
-	}
-
-	height = icd->rect_current.height;
-	if (pcdev->is_interlaced) {
-		height /= 2;
-		cdwdr_width *= 2;
-	}
-
-	ceu_write(pcdev, CAMOR, 0);
-	ceu_write(pcdev, CAPWR, (height << 16) | width);
 	ceu_write(pcdev, CFLCR, 0); /* no scaling */
-	ceu_write(pcdev, CFSZR, (height << 16) | cfszr_width);
 
 	/* A few words about byte order (observed in Big Endian mode)
 	 *
@@ -544,10 +618,16 @@ static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd,
 		value &= ~0x00000010; /* convert 4:2:2 -> 4:2:0 */
 
 	ceu_write(pcdev, CDOCR, value);
-
-	ceu_write(pcdev, CDWDR, cdwdr_width);
 	ceu_write(pcdev, CFWCR, 0); /* keep "datafetch firewall" disabled */
 
+	dev_dbg(&icd->dev, "S_FMT successful for %c%c%c%c %ux%u@%u.%u\n",
+		pixfmt & 0xff, (pixfmt >> 8) & 0xff,
+		(pixfmt >> 16) & 0xff, (pixfmt >> 24) & 0xff,
+		icd->rect_current.width, icd->rect_current.height,
+		icd->rect_current.left, icd->rect_current.top);
+
+	capture_restore(pcdev, capsr);
+
 	/* not in bundle mode: skip CBDSR, CDAYR2, CDACR2, CDBYR2, CDBCR2 */
 	return 0;
 }
@@ -600,21 +680,32 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, int idx,
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	int ret, k, n;
 	int formats = 0;
+	struct sh_mobile_ceu_cam *cam;
 
 	ret = sh_mobile_ceu_try_bus_param(icd);
 	if (ret < 0)
 		return 0;
 
+	if (!icd->host_priv) {
+		cam = kzalloc(sizeof(*cam), GFP_KERNEL);
+		if (!cam)
+			return -ENOMEM;
+
+		icd->host_priv = cam;
+	} else {
+		cam = icd->host_priv;
+	}
+
 	/* Beginning of a pass */
 	if (!idx)
-		icd->host_priv = NULL;
+		cam->extra_fmt = NULL;
 
 	switch (icd->formats[idx].fourcc) {
 	case V4L2_PIX_FMT_UYVY:
 	case V4L2_PIX_FMT_VYUY:
 	case V4L2_PIX_FMT_YUYV:
 	case V4L2_PIX_FMT_YVYU:
-		if (icd->host_priv)
+		if (cam->extra_fmt)
 			goto add_single_format;
 
 		/*
@@ -626,7 +717,7 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, int idx,
 		 * the host_priv pointer and check whether the format you're
 		 * going to add now is already there.
 		 */
-		icd->host_priv = (void *)sh_mobile_ceu_formats;
+		cam->extra_fmt = (void *)sh_mobile_ceu_formats;
 
 		n = ARRAY_SIZE(sh_mobile_ceu_formats);
 		formats += n;
@@ -657,18 +748,130 @@ add_single_format:
 	return formats;
 }
 
+static void sh_mobile_ceu_put_formats(struct soc_camera_device *icd)
+{
+	kfree(icd->host_priv);
+	icd->host_priv = NULL;
+}
+
+static bool is_smaller(struct v4l2_rect *r1, struct v4l2_rect *r2)
+{
+	return r1->width < r2->width || r1->height < r2->height;
+}
+
 static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd,
 				  struct v4l2_rect *rect)
 {
-	return icd->ops->set_crop(icd, rect);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct sh_mobile_ceu_dev *pcdev = ici->priv;
+	struct v4l2_rect cam_rect = *rect;
+	struct sh_mobile_ceu_cam *cam = icd->host_priv;
+	unsigned short width, height;
+	u32 capsr;
+	int ret;
+
+	capsr = capture_save_reset(pcdev);
+	dev_dbg(&icd->dev, "CAPSR %x\n", capsr);
+
+	ret = icd->ops->set_crop(icd, &cam_rect);
+	if (!ret && !memcmp(rect, &cam_rect, sizeof(*rect))) {
+		dev_dbg(&icd->dev, "Camera S_CROP successful for %ux%u@%u.%u\n",
+			cam_rect.width, cam_rect.height,
+			cam_rect.left, cam_rect.top);
+		goto ceu_set_rect;
+	}
+
+	/* Try to fix cropping, that camera hasn't managed to do */
+	dev_dbg(&icd->dev, "Fix camera S_CROP %d for %ux%u@%u.%u\n",
+		ret, cam_rect.width, cam_rect.height,
+		cam_rect.left, cam_rect.top);
+
+	/*
+	 * Popular special case - some cameras can only handle fixed sizes like
+	 * QVGA, VGA,... Take care to avoid infinite loop.
+	 */
+	width = max(cam_rect.width, 1) * 2;
+	height = max(cam_rect.height, 1) * 2;
+	while (!ret && is_smaller(&cam_rect, rect) &&
+	       (icd->rect_max.width >= width &&
+		icd->rect_max.height >= height)) {
+		cam_rect.width = width;
+		cam_rect.height = height;
+
+		if (cam_rect.width + cam_rect.left >
+		    icd->rect_max.width + icd->rect_max.left)
+			cam_rect.left = icd->rect_max.width +
+				icd->rect_max.left - cam_rect.width;
+
+		if (cam_rect.height + cam_rect.top >
+		    icd->rect_max.height + icd->rect_max.top)
+			cam_rect.top = icd->rect_max.height +
+				icd->rect_max.top - cam_rect.height;
+
+		ret = icd->ops->set_crop(icd, &cam_rect);
+		dev_dbg(&icd->dev, "Camera S_CROP %d for %ux%u@%u.%u\n",
+			ret, cam_rect.width, cam_rect.height,
+			cam_rect.left, cam_rect.top);
+		width *= 2;
+		height *= 2;
+	}
+
+	/*
+	 * If the camera failed to configure cropping, it should not modify the
+	 * rectangle
+	 */
+	if ((ret < 0 && is_smaller(&icd->rect_current, rect)) ||
+	    is_smaller(&cam_rect, rect)) {
+		/*
+		 * The camera failed to configure a suitable cropping,
+		 * we cannot use the current rectangle, set to max
+		 */
+		cam_rect = icd->rect_max;
+		ret = icd->ops->set_crop(icd, &cam_rect);
+		dev_dbg(&icd->dev, "Camera S_CROP %d for max %ux%u@%u.%u\n",
+			ret, cam_rect.width, cam_rect.height,
+			cam_rect.left, cam_rect.top);
+		if (ret < 0)
+			/* All failed, hopefully resume current capture */
+			goto resume_capture;
+	}
+
+	/* We now have a rectangle, larger than requested, let's crop */
+
+	/*
+	 * We have to preserve camera rectangle between close() / open(),
+	 * because soc-camera core calls .set_fmt() on each first open() with
+	 * last before last close() _user_ rectangle, which can be different
+	 * from camera rectangle.
+	 */
+	dev_dbg(&icd->dev, "SH S_CROP from %ux%u@%u.%u to %ux%u@%u.%u\n",
+		cam_rect.width, cam_rect.height, cam_rect.left, cam_rect.top,
+		rect->width, rect->height, rect->left, rect->top);
+
+	ret = 0;
+
+ceu_set_rect:
+	cam->camera_rect = cam_rect;
+
+	/* Set CAMOR, CAPWR, CFSZR, take care of CDWDR */
+	if (pcdev->active)
+		capsr |= 1;
+	sh_mobile_ceu_set_rect(icd, rect);
+	capture_restore(pcdev, capsr);
+
+resume_capture:
+
+	/* Even if only camera cropping succeeded */
+	return ret;
 }
 
 static int sh_mobile_ceu_set_fmt(struct soc_camera_device *icd,
 				 struct v4l2_format *f)
 {
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
-	struct sh_mobile_ceu_dev *pcdev = ici->priv;
-	__u32 pixfmt = f->fmt.pix.pixelformat;
+	struct sh_mobile_ceu_cam *cam = icd->host_priv;
+	struct v4l2_pix_format *pix = &f->fmt.pix;
+	__u32 pixfmt = pix->pixelformat;
 	const struct soc_camera_format_xlate *xlate;
 	int ret;
 
@@ -678,13 +881,17 @@ static int sh_mobile_ceu_set_fmt(struct soc_camera_device *icd,
 		return -EINVAL;
 	}
 
-	f->fmt.pix.pixelformat = xlate->cam_fmt->fourcc;
+	pix->pixelformat = xlate->cam_fmt->fourcc;
 	ret = v4l2_device_call_until_err(&ici->v4l2_dev, (__u32)icd, video, s_fmt, f);
-	f->fmt.pix.pixelformat = pixfmt;
+	pix->pixelformat = pixfmt;
 	if (!ret) {
 		icd->buswidth = xlate->buswidth;
 		icd->current_fmt = xlate->host_fmt;
-		pcdev->camera_fmt = xlate->cam_fmt;
+		cam->camera_fmt = xlate->cam_fmt;
+		cam->camera_rect.width = pix->width;
+		cam->camera_rect.height = pix->height;
+		cam->camera_rect.left = icd->rect_current.left;
+		cam->camera_rect.top = icd->rect_current.top;
 	}
 
 	return ret;
@@ -696,7 +903,8 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd,
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
 	const struct soc_camera_format_xlate *xlate;
-	__u32 pixfmt = f->fmt.pix.pixelformat;
+	struct v4l2_pix_format *pix = &f->fmt.pix;
+	__u32 pixfmt = pix->pixelformat;
 	int ret;
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
@@ -707,27 +915,27 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd,
 
 	/* FIXME: calculate using depth and bus width */
 
-	v4l_bound_align_image(&f->fmt.pix.width, 2, 2560, 1,
-			      &f->fmt.pix.height, 4, 1920, 2, 0);
+	v4l_bound_align_image(&pix->width, 2, 2560, 1,
+			      &pix->height, 4, 1920, 2, 0);
 
-	f->fmt.pix.bytesperline = f->fmt.pix.width *
+	pix->bytesperline = pix->width *
 		DIV_ROUND_UP(xlate->host_fmt->depth, 8);
-	f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline;
+	pix->sizeimage = pix->height * pix->bytesperline;
 
-	f->fmt.pix.pixelformat = xlate->cam_fmt->fourcc;
+	pix->pixelformat = xlate->cam_fmt->fourcc;
 
 	/* limit to sensor capabilities */
 	ret = v4l2_device_call_until_err(&ici->v4l2_dev, (__u32)icd, video, try_fmt, f);
-	f->fmt.pix.pixelformat = pixfmt;
+	pix->pixelformat = pixfmt;
 	if (ret < 0)
 		return ret;
 
-	switch (f->fmt.pix.field) {
+	switch (pix->field) {
 	case V4L2_FIELD_INTERLACED:
 		pcdev->is_interlaced = 1;
 		break;
 	case V4L2_FIELD_ANY:
-		f->fmt.pix.field = V4L2_FIELD_NONE;
+		pix->field = V4L2_FIELD_NONE;
 		/* fall-through */
 	case V4L2_FIELD_NONE:
 		pcdev->is_interlaced = 0;
@@ -856,6 +1064,7 @@ static struct soc_camera_host_ops sh_mobile_ceu_host_ops = {
 	.add		= sh_mobile_ceu_add_device,
 	.remove		= sh_mobile_ceu_remove_device,
 	.get_formats	= sh_mobile_ceu_get_formats,
+	.put_formats	= sh_mobile_ceu_put_formats,
 	.set_crop	= sh_mobile_ceu_set_crop,
 	.set_fmt	= sh_mobile_ceu_set_fmt,
 	.try_fmt	= sh_mobile_ceu_try_fmt,
-- 
cgit v1.2.3


From 123ab622c075e2252b46565c81dbf5c0748a82af Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 25 Aug 2009 11:46:52 -0300
Subject: V4L/DVB (12523): tw9910: return updated geometry on successful S_FMT
 and S_CROP

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/tw9910.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/tw9910.c b/drivers/media/video/tw9910.c
index 7199e0f71b2..83596cbc9b9 100644
--- a/drivers/media/video/tw9910.c
+++ b/drivers/media/video/tw9910.c
@@ -699,6 +699,11 @@ static int tw9910_set_crop(struct soc_camera_device *icd,
 	if (ret < 0)
 		goto tw9910_set_fmt_error;
 
+	rect->width = priv->scale->width;
+	rect->height = priv->scale->height;
+	rect->left = 0;
+	rect->top = 0;
+
 	return ret;
 
 tw9910_set_fmt_error:
@@ -720,7 +725,7 @@ static int tw9910_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
 		.width	= pix->width,
 		.height	= pix->height,
 	};
-	int i;
+	int i, ret;
 
 	/*
 	 * check color format
@@ -732,7 +737,12 @@ static int tw9910_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
 	if (i == ARRAY_SIZE(tw9910_color_fmt))
 		return -EINVAL;
 
-	return tw9910_set_crop(icd, &rect);
+	ret = tw9910_set_crop(icd, &rect);
+	if (!ret) {
+		pix->width = rect.width;
+		pix->height = rect.height;
+	}
+	return ret;
 }
 
 static int tw9910_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
-- 
cgit v1.2.3


From 68a54f0e53b62806040fb7884b2e0d79b922bf00 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 25 Aug 2009 11:46:52 -0300
Subject: V4L/DVB (12524): soc-camera: S_CROP V4L2 API compliance fix

V4L2 API mandates, that drivers do not update the argument of the S_CROP
ioctl() with the actual geometry. Comply.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/soc_camera.c | 39 +++++++++++++++++++++++----------------
 1 file changed, 23 insertions(+), 16 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index 44a94dc934f..a22fcd0ff8b 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -747,12 +747,19 @@ static int soc_camera_g_crop(struct file *file, void *fh,
 	return 0;
 }
 
+/*
+ * According to the V4L2 API, drivers shall not update the struct v4l2_crop
+ * argument with the actual geometry, instead, the user shall use G_CROP to
+ * retrieve it. However, we expect camera host and client drivers to update
+ * the argument, which we then use internally, but do not return to the user.
+ */
 static int soc_camera_s_crop(struct file *file, void *fh,
 			     struct v4l2_crop *a)
 {
 	struct soc_camera_file *icf = file->private_data;
 	struct soc_camera_device *icd = icf->icd;
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct v4l2_rect rect = a->c;
 	int ret;
 
 	if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
@@ -761,29 +768,29 @@ static int soc_camera_s_crop(struct file *file, void *fh,
 	/* Cropping is allowed during a running capture, guard consistency */
 	mutex_lock(&icf->vb_vidq.vb_lock);
 
-	if (a->c.width > icd->rect_max.width)
-		a->c.width = icd->rect_max.width;
+	if (rect.width > icd->rect_max.width)
+		rect.width = icd->rect_max.width;
 
-	if (a->c.width < icd->width_min)
-		a->c.width = icd->width_min;
+	if (rect.width < icd->width_min)
+		rect.width = icd->width_min;
 
-	if (a->c.height > icd->rect_max.height)
-		a->c.height = icd->rect_max.height;
+	if (rect.height > icd->rect_max.height)
+		rect.height = icd->rect_max.height;
 
-	if (a->c.height < icd->height_min)
-		a->c.height = icd->height_min;
+	if (rect.height < icd->height_min)
+		rect.height = icd->height_min;
 
-	if (a->c.width + a->c.left > icd->rect_max.width + icd->rect_max.left)
-		a->c.left = icd->rect_max.width + icd->rect_max.left -
-			a->c.width;
+	if (rect.width + rect.left > icd->rect_max.width + icd->rect_max.left)
+		rect.left = icd->rect_max.width + icd->rect_max.left -
+			rect.width;
 
-	if (a->c.height + a->c.top > icd->rect_max.height + icd->rect_max.top)
-		a->c.top = icd->rect_max.height + icd->rect_max.top -
-			a->c.height;
+	if (rect.height + rect.top > icd->rect_max.height + icd->rect_max.top)
+		rect.top = icd->rect_max.height + icd->rect_max.top -
+			rect.height;
 
-	ret = ici->ops->set_crop(icd, &a->c);
+	ret = ici->ops->set_crop(icd, &rect);
 	if (!ret)
-		icd->rect_current = a->c;
+		icd->rect_current = rect;
 
 	mutex_unlock(&icf->vb_vidq.vb_lock);
 
-- 
cgit v1.2.3


From b897a91afbed57558324ef4059efa2e2419e8b66 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 25 Aug 2009 11:46:53 -0300
Subject: V4L/DVB (12525): soc-camera: prohibit geometry change with
 initialised buffers

Prohibit S_FMT and S_CROP with a different window width or height after video
buffer initialisation. This simplifies the work to be done in specific host and
client drivers, and it doesn't seem to make much sense to allow these changes.
We do however allow S_CROP with equal width and height to just move the window,
this doesn't affect video buffer management and is usually easy enough to
implement.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/soc_camera.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index a22fcd0ff8b..21a8aa586da 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -517,8 +517,8 @@ static int soc_camera_s_fmt_vid_cap(struct file *file, void *priv,
 
 	mutex_lock(&icf->vb_vidq.vb_lock);
 
-	if (videobuf_queue_is_busy(&icf->vb_vidq)) {
-		dev_err(&icd->dev, "S_FMT denied: queue busy\n");
+	if (icf->vb_vidq.bufs[0]) {
+		dev_err(&icd->dev, "S_FMT denied: queue initialised\n");
 		ret = -EBUSY;
 		goto unlock;
 	}
@@ -768,6 +768,15 @@ static int soc_camera_s_crop(struct file *file, void *fh,
 	/* Cropping is allowed during a running capture, guard consistency */
 	mutex_lock(&icf->vb_vidq.vb_lock);
 
+	/* Prohibit window size change with initialised buffers */
+	if (icf->vb_vidq.bufs[0] && (rect.width != icd->rect_current.width ||
+				     rect.height != icd->rect_current.height)) {
+		dev_err(&icd->dev,
+			"S_CROP denied: queue initialised and sizes differ\n");
+		ret = -EBUSY;
+		goto unlock;
+	}
+
 	if (rect.width > icd->rect_max.width)
 		rect.width = icd->rect_max.width;
 
@@ -792,6 +801,7 @@ static int soc_camera_s_crop(struct file *file, void *fh,
 	if (!ret)
 		icd->rect_current = rect;
 
+unlock:
 	mutex_unlock(&icf->vb_vidq.vb_lock);
 
 	return ret;
-- 
cgit v1.2.3


From 94896298bea7823cbccbff563c77b4ae6cabb08e Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 25 Aug 2009 11:46:53 -0300
Subject: V4L/DVB (12526): ov772x: do not use scaling for cropping

OV772x sensors cannot crop, they only support two fixed formats: VGA and QVGA.
We should not change the format when requested to crop, only S_FMT can do this.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/ov772x.c | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/ov772x.c b/drivers/media/video/ov772x.c
index b720558d8a2..03488f9e1c8 100644
--- a/drivers/media/video/ov772x.c
+++ b/drivers/media/video/ov772x.c
@@ -955,23 +955,22 @@ ov772x_set_fmt_error:
 	return ret;
 }
 
+/* Cannot crop, just return the current geometry */
 static int ov772x_set_crop(struct soc_camera_device *icd,
 			   struct v4l2_rect *rect)
 {
 	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 	struct ov772x_priv *priv = to_ov772x(client);
-	int ret;
 
-	if (!priv->fmt)
+	if (!priv->fmt || !priv->win)
 		return -EINVAL;
 
-	ret = ov772x_set_params(client, &rect->width, &rect->height,
-				priv->fmt->fourcc);
-	if (!ret) {
-		rect->left = 0;
-		rect->top = 0;
-	}
-	return ret;
+	rect->left = 0;
+	rect->top = 0;
+	rect->width = priv->win->width;
+	rect->height = priv->win->height;
+
+	return 0;
 }
 
 static int ov772x_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
-- 
cgit v1.2.3


From 4a5a5b2d620c3ec362936c4fe3799a29f8de163c Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 25 Aug 2009 11:46:53 -0300
Subject: V4L/DVB (12527): tw9910: do not lie about cropping abilities

The current tw9910 driver does not implement cropping correctly. Therefore, and
also because various rectangles in struct soc_camera_device are in user scale,
we cannot and shall not use rect_current as window location.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/tw9910.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/tw9910.c b/drivers/media/video/tw9910.c
index 83596cbc9b9..735d0bd4bb1 100644
--- a/drivers/media/video/tw9910.c
+++ b/drivers/media/video/tw9910.c
@@ -719,9 +719,10 @@ static int tw9910_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
 	struct i2c_client *client = sd->priv;
 	struct soc_camera_device *icd = client->dev.platform_data;
 	struct v4l2_pix_format *pix = &f->fmt.pix;
+	/* See tw9910_set_crop() - no proper cropping support */
 	struct v4l2_rect rect = {
-		.left	= icd->rect_current.left,
-		.top	= icd->rect_current.top,
+		.left	= 0,
+		.top	= 0,
 		.width	= pix->width,
 		.height	= pix->height,
 	};
@@ -850,6 +851,7 @@ static struct v4l2_subdev_ops tw9910_subdev_ops = {
  * i2c_driver function
  */
 
+/* This is called during probe, so, setting rect_max is Ok here: scale == 1 */
 static void limit_to_scale(struct soc_camera_device *icd,
 			   const struct tw9910_scale_ctrl *scale)
 {
-- 
cgit v1.2.3


From 961801bbb3448a86f0cc93747cecbfae686d81d1 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 25 Aug 2009 11:46:54 -0300
Subject: V4L/DVB (12528): sh_mobile_ceu_camera: implement host-side image
 scaling

Use host-side image scaling when the client fails to set the requested format.
We also have to take scaling into account when performing host-side cropping.
Similar to cropping we try to use client-side scaling as much as possible to
preserve bus bandwidth and optimise the frame-rate.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/sh_mobile_ceu_camera.c | 392 +++++++++++++++++++++++------
 1 file changed, 321 insertions(+), 71 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index 3fee7c01fd5..499d1a235fd 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -95,6 +95,8 @@ struct sh_mobile_ceu_dev {
 
 	struct sh_mobile_ceu_info *pdata;
 
+	u32 cflcr;
+
 	unsigned int is_interlaced:1;
 	unsigned int image_mode:1;
 	unsigned int is_16bit:1;
@@ -102,6 +104,7 @@ struct sh_mobile_ceu_dev {
 
 struct sh_mobile_ceu_cam {
 	struct v4l2_rect camera_rect;
+	struct v4l2_rect camera_max;
 	const struct soc_camera_data_format *extra_fmt;
 	const struct soc_camera_data_format *camera_fmt;
 };
@@ -435,54 +438,119 @@ static void sh_mobile_ceu_remove_device(struct soc_camera_device *icd)
 	pcdev->icd = NULL;
 }
 
+/*
+ * See chapter 29.4.12 "Capture Filter Control Register (CFLCR)"
+ * in SH7722 Hardware Manual
+ */
+static unsigned int size_dst(unsigned int src, unsigned int scale)
+{
+	unsigned int mant_pre = scale >> 12;
+	if (!src || !scale)
+		return src;
+	return ((mant_pre + 2 * (src - 1)) / (2 * mant_pre) - 1) *
+		mant_pre * 4096 / scale + 1;
+}
+
+static unsigned int size_src(unsigned int dst, unsigned int scale)
+{
+	unsigned int mant_pre = scale >> 12, tmp;
+	if (!dst || !scale)
+		return dst;
+	for (tmp = ((dst - 1) * scale + 2048 * mant_pre) / 4096 + 1;
+	     size_dst(tmp, scale) < dst;
+	     tmp++)
+		;
+	return tmp;
+}
+
+static u16 calc_scale(unsigned int src, unsigned int *dst)
+{
+	u16 scale;
+
+	if (src == *dst)
+		return 0;
+
+	scale = (src * 4096 / *dst) & ~7;
+
+	while (scale > 4096 && size_dst(src, scale) < *dst)
+		scale -= 8;
+
+	*dst = size_dst(src, scale);
+
+	return scale;
+}
+
+/* rect is guaranteed to not exceed the scaled camera rectangle */
 static void sh_mobile_ceu_set_rect(struct soc_camera_device *icd,
 				   struct v4l2_rect *rect)
 {
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	struct sh_mobile_ceu_cam *cam = icd->host_priv;
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
-	int width, height, cfszr_width, cdwdr_width;
-	unsigned int left_offset, top_offset;
+	int width, height, cfszr_width, cdwdr_width, in_width, in_height;
+	unsigned int left_offset, top_offset, left, top;
+	unsigned int hscale = pcdev->cflcr & 0xffff;
+	unsigned int vscale = (pcdev->cflcr >> 16) & 0xffff;
 	u32 camor;
 
-	if (rect->left > cam->camera_rect.left) {
-		left_offset = rect->left - cam->camera_rect.left;
+	/* Switch to the camera scale */
+	left = size_src(rect->left, hscale);
+	top = size_src(rect->top, vscale);
+
+	dev_dbg(&icd->dev, "Left %u * 0x%x = %u, top %u * 0x%x = %u\n",
+		rect->left, hscale, left, rect->top, vscale, top);
+
+	if (left > cam->camera_rect.left) {
+		left_offset = left - cam->camera_rect.left;
 	} else {
 		left_offset = 0;
-		rect->left = cam->camera_rect.left;
+		left = cam->camera_rect.left;
 	}
 
-	if (rect->top > cam->camera_rect.top) {
-		top_offset = rect->top - cam->camera_rect.top;
+	if (top > cam->camera_rect.top) {
+		top_offset = top - cam->camera_rect.top;
 	} else {
 		top_offset = 0;
-		rect->top = cam->camera_rect.top;
+		top = cam->camera_rect.top;
 	}
 
-	dev_dbg(&icd->dev, "Offsets %u:%u\n", left_offset, top_offset);
+	dev_dbg(&icd->dev, "New left %u, top %u, offsets %u:%u\n",
+		rect->left, rect->top, left_offset, top_offset);
 
 	if (pcdev->image_mode) {
 		width = rect->width;
-		if (!pcdev->is_16bit)
+		in_width = cam->camera_rect.width;
+		if (!pcdev->is_16bit) {
 			width *= 2;
+			in_width *= 2;
+			left_offset *= 2;
+		}
 		cfszr_width = cdwdr_width = rect->width;
 	} else {
-		width = rect->width *
-			((icd->current_fmt->depth + 7) >> 3);
-		width = pcdev->is_16bit ? width / 2 : width;
+		unsigned int w_factor = (icd->current_fmt->depth + 7) >> 3;
+		if (!pcdev->is_16bit)
+			w_factor *= 2;
+
+		width = rect->width * w_factor / 2;
+		in_width = cam->camera_rect.width * w_factor / 2;
+		left_offset = left_offset * w_factor / 2;
+
 		cfszr_width = pcdev->is_16bit ? width : width / 2;
 		cdwdr_width = pcdev->is_16bit ? width * 2 : width;
 	}
 
 	height = rect->height;
+	in_height = cam->camera_rect.height;
 	if (pcdev->is_interlaced) {
 		height /= 2;
+		in_height /= 2;
+		top_offset /= 2;
 		cdwdr_width *= 2;
 	}
 
 	camor = left_offset | (top_offset << 16);
 	ceu_write(pcdev, CAMOR, camor);
-	ceu_write(pcdev, CAPWR, (height << 16) | width);
+	ceu_write(pcdev, CAPWR, (in_height << 16) | in_width);
 	ceu_write(pcdev, CFSZR, (height << 16) | cfszr_width);
 	ceu_write(pcdev, CDWDR, cdwdr_width);
 }
@@ -556,7 +624,7 @@ static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd,
 	ceu_write(pcdev, CRCMPR, 0);
 
 	value = 0x00000010; /* data fetch by default */
-	pcdev->image_mode = yuv_lineskip = 0;
+	yuv_lineskip = 0;
 
 	switch (icd->current_fmt->fourcc) {
 	case V4L2_PIX_FMT_NV12:
@@ -565,7 +633,6 @@ static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd,
 		/* fall-through */
 	case V4L2_PIX_FMT_NV16:
 	case V4L2_PIX_FMT_NV61:
-		pcdev->image_mode = 1;
 		switch (cam->camera_fmt->fourcc) {
 		case V4L2_PIX_FMT_UYVY:
 			value = 0x00000000; /* Cb0, Y0, Cr0, Y1 */
@@ -599,7 +666,7 @@ static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd,
 	mdelay(1);
 	sh_mobile_ceu_set_rect(icd, &icd->rect_current);
 
-	ceu_write(pcdev, CFLCR, 0); /* no scaling */
+	ceu_write(pcdev, CFLCR, pcdev->cflcr);
 
 	/* A few words about byte order (observed in Big Endian mode)
 	 *
@@ -620,7 +687,7 @@ static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd,
 	ceu_write(pcdev, CDOCR, value);
 	ceu_write(pcdev, CFWCR, 0); /* keep "datafetch firewall" disabled */
 
-	dev_dbg(&icd->dev, "S_FMT successful for %c%c%c%c %ux%u@%u.%u\n",
+	dev_dbg(&icd->dev, "S_FMT successful for %c%c%c%c %ux%u@%u:%u\n",
 		pixfmt & 0xff, (pixfmt >> 8) & 0xff,
 		(pixfmt >> 16) & 0xff, (pixfmt >> 24) & 0xff,
 		icd->rect_current.width, icd->rect_current.height,
@@ -692,6 +759,7 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, int idx,
 			return -ENOMEM;
 
 		icd->host_priv = cam;
+		cam->camera_max = icd->rect_max;
 	} else {
 		cam = icd->host_priv;
 	}
@@ -754,86 +822,150 @@ static void sh_mobile_ceu_put_formats(struct soc_camera_device *icd)
 	icd->host_priv = NULL;
 }
 
+/* Check if any dimension of r1 is smaller than respective one of r2 */
 static bool is_smaller(struct v4l2_rect *r1, struct v4l2_rect *r2)
 {
 	return r1->width < r2->width || r1->height < r2->height;
 }
 
+/* Check if r1 fails to cover r2 */
+static bool is_inside(struct v4l2_rect *r1, struct v4l2_rect *r2)
+{
+	return r1->left > r2->left || r1->top > r2->top ||
+		r1->left + r1->width < r2->left + r2->width ||
+		r1->top + r1->height < r2->top + r2->height;
+}
+
+/*
+ * CEU can scale and crop, but we don't want to waste bandwidth and kill the
+ * framerate by always requesting the maximum image from the client. For
+ * cropping we also have to take care of the current scale. The common for both
+ * scaling and cropping approach is:
+ * 1. try if the client can produce exactly what requested by the user
+ * 2. if (1) failed, try to double the client image until we get one big enough
+ * 3. if (2) failed, try to request the maximum image
+ */
 static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd,
 				  struct v4l2_rect *rect)
 {
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
-	struct v4l2_rect cam_rect = *rect;
+	struct v4l2_rect cam_rect, target, cam_max;
 	struct sh_mobile_ceu_cam *cam = icd->host_priv;
+	unsigned int hscale = pcdev->cflcr & 0xffff;
+	unsigned int vscale = (pcdev->cflcr >> 16) & 0xffff;
 	unsigned short width, height;
 	u32 capsr;
 	int ret;
 
+	/* Scale back up into client units */
+	cam_rect.left	= size_src(rect->left, hscale);
+	cam_rect.width	= size_src(rect->width, hscale);
+	cam_rect.top	= size_src(rect->top, vscale);
+	cam_rect.height	= size_src(rect->height, vscale);
+
+	target = cam_rect;
+
 	capsr = capture_save_reset(pcdev);
-	dev_dbg(&icd->dev, "CAPSR %x\n", capsr);
+	dev_dbg(&icd->dev, "CAPSR 0x%x, CFLCR 0x%x\n", capsr, pcdev->cflcr);
 
+	/* First attempt - see if the client can deliver a perfect result */
 	ret = icd->ops->set_crop(icd, &cam_rect);
-	if (!ret && !memcmp(rect, &cam_rect, sizeof(*rect))) {
-		dev_dbg(&icd->dev, "Camera S_CROP successful for %ux%u@%u.%u\n",
+	if (!ret && !memcmp(&target, &cam_rect, sizeof(target))) {
+		dev_dbg(&icd->dev, "Camera S_CROP successful for %ux%u@%u:%u\n",
 			cam_rect.width, cam_rect.height,
 			cam_rect.left, cam_rect.top);
 		goto ceu_set_rect;
 	}
 
 	/* Try to fix cropping, that camera hasn't managed to do */
-	dev_dbg(&icd->dev, "Fix camera S_CROP %d for %ux%u@%u.%u\n",
+	dev_dbg(&icd->dev, "Fix camera S_CROP %d for %ux%u@%u:%u"
+		" to %ux%u@%u:%u\n",
 		ret, cam_rect.width, cam_rect.height,
-		cam_rect.left, cam_rect.top);
+		cam_rect.left, cam_rect.top,
+		target.width, target.height, target.left, target.top);
 
 	/*
 	 * Popular special case - some cameras can only handle fixed sizes like
 	 * QVGA, VGA,... Take care to avoid infinite loop.
 	 */
-	width = max(cam_rect.width, 1) * 2;
-	height = max(cam_rect.height, 1) * 2;
-	while (!ret && is_smaller(&cam_rect, rect) &&
-	       (icd->rect_max.width >= width &&
-		icd->rect_max.height >= height)) {
+	width = max(cam_rect.width, 1);
+	height = max(cam_rect.height, 1);
+	cam_max.width = size_src(icd->rect_max.width, hscale);
+	cam_max.left = size_src(icd->rect_max.left, hscale);
+	cam_max.height = size_src(icd->rect_max.height, vscale);
+	cam_max.top = size_src(icd->rect_max.top, vscale);
+	while (!ret && (is_smaller(&cam_rect, &target) ||
+			is_inside(&cam_rect, &target)) &&
+	       cam_max.width >= width && cam_max.height >= height) {
+
+		width *= 2;
+		height *= 2;
 		cam_rect.width = width;
 		cam_rect.height = height;
 
+		/* We do not know what the camera is capable of, play safe */
+		if (cam_rect.left > target.left)
+			cam_rect.left = cam_max.left;
+
+		if (cam_rect.left + cam_rect.width < target.left + target.width)
+			cam_rect.width = target.left + target.width -
+				cam_rect.left;
+
+		if (cam_rect.top > target.top)
+			cam_rect.top = cam_max.top;
+
+		if (cam_rect.top + cam_rect.height < target.top + target.height)
+			cam_rect.height = target.top + target.height -
+				cam_rect.top;
+
 		if (cam_rect.width + cam_rect.left >
-		    icd->rect_max.width + icd->rect_max.left)
-			cam_rect.left = icd->rect_max.width +
-				icd->rect_max.left - cam_rect.width;
+		    cam_max.width + cam_max.left)
+			cam_rect.left = max(cam_max.width + cam_max.left -
+					    cam_rect.width, cam_max.left);
 
 		if (cam_rect.height + cam_rect.top >
-		    icd->rect_max.height + icd->rect_max.top)
-			cam_rect.top = icd->rect_max.height +
-				icd->rect_max.top - cam_rect.height;
+		    cam_max.height + cam_max.top)
+			cam_rect.top = max(cam_max.height + cam_max.top -
+					   cam_rect.height, cam_max.top);
 
 		ret = icd->ops->set_crop(icd, &cam_rect);
-		dev_dbg(&icd->dev, "Camera S_CROP %d for %ux%u@%u.%u\n",
+		dev_dbg(&icd->dev, "Camera S_CROP %d for %ux%u@%u:%u\n",
 			ret, cam_rect.width, cam_rect.height,
 			cam_rect.left, cam_rect.top);
-		width *= 2;
-		height *= 2;
 	}
 
 	/*
 	 * If the camera failed to configure cropping, it should not modify the
 	 * rectangle
 	 */
-	if ((ret < 0 && is_smaller(&icd->rect_current, rect)) ||
-	    is_smaller(&cam_rect, rect)) {
+	if ((ret < 0 && (is_smaller(&icd->rect_current, rect) ||
+			 is_inside(&icd->rect_current, rect))) ||
+	    is_smaller(&cam_rect, &target) || is_inside(&cam_rect, &target)) {
 		/*
 		 * The camera failed to configure a suitable cropping,
 		 * we cannot use the current rectangle, set to max
 		 */
-		cam_rect = icd->rect_max;
+		cam_rect = cam_max;
 		ret = icd->ops->set_crop(icd, &cam_rect);
-		dev_dbg(&icd->dev, "Camera S_CROP %d for max %ux%u@%u.%u\n",
+		dev_dbg(&icd->dev, "Camera S_CROP %d for max %ux%u@%u:%u\n",
 			ret, cam_rect.width, cam_rect.height,
 			cam_rect.left, cam_rect.top);
 		if (ret < 0)
 			/* All failed, hopefully resume current capture */
 			goto resume_capture;
+
+		/* Finally, adjust the target rectangle */
+		if (target.width > cam_rect.width)
+			target.width = cam_rect.width;
+		if (target.height > cam_rect.height)
+			target.height = cam_rect.height;
+		if (target.left + target.width > cam_rect.left + cam_rect.width)
+			target.left = cam_rect.left + cam_rect.width -
+				target.width;
+		if (target.top + target.height > cam_rect.top + cam_rect.height)
+			target.top = cam_rect.top + cam_rect.height -
+				target.height;
 	}
 
 	/* We now have a rectangle, larger than requested, let's crop */
@@ -844,8 +976,10 @@ static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd,
 	 * last before last close() _user_ rectangle, which can be different
 	 * from camera rectangle.
 	 */
-	dev_dbg(&icd->dev, "SH S_CROP from %ux%u@%u.%u to %ux%u@%u.%u\n",
+	dev_dbg(&icd->dev,
+		"SH S_CROP from %ux%u@%u:%u to %ux%u@%u:%u, scale to %ux%u@%u:%u\n",
 		cam_rect.width, cam_rect.height, cam_rect.left, cam_rect.top,
+		target.width, target.height, target.left, target.top,
 		rect->width, rect->height, rect->left, rect->top);
 
 	ret = 0;
@@ -853,27 +987,49 @@ static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd,
 ceu_set_rect:
 	cam->camera_rect = cam_rect;
 
+	rect->width	= size_dst(target.width, hscale);
+	rect->left	= size_dst(target.left, hscale);
+	rect->height	= size_dst(target.height, vscale);
+	rect->top	= size_dst(target.top, vscale);
+
+	sh_mobile_ceu_set_rect(icd, rect);
+
+resume_capture:
 	/* Set CAMOR, CAPWR, CFSZR, take care of CDWDR */
 	if (pcdev->active)
 		capsr |= 1;
-	sh_mobile_ceu_set_rect(icd, rect);
 	capture_restore(pcdev, capsr);
 
-resume_capture:
-
 	/* Even if only camera cropping succeeded */
 	return ret;
 }
 
+/* Similar to set_crop multistage iterative algorithm */
 static int sh_mobile_ceu_set_fmt(struct soc_camera_device *icd,
 				 struct v4l2_format *f)
 {
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct sh_mobile_ceu_dev *pcdev = ici->priv;
 	struct sh_mobile_ceu_cam *cam = icd->host_priv;
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 	__u32 pixfmt = pix->pixelformat;
 	const struct soc_camera_format_xlate *xlate;
-	int ret;
+	unsigned int width = pix->width, height = pix->height, tmp_w, tmp_h;
+	u16 vscale, hscale;
+	int ret, is_interlaced;
+
+	switch (pix->field) {
+	case V4L2_FIELD_INTERLACED:
+		is_interlaced = 1;
+		break;
+	case V4L2_FIELD_ANY:
+	default:
+		pix->field = V4L2_FIELD_NONE;
+		/* fall-through */
+	case V4L2_FIELD_NONE:
+		is_interlaced = 0;
+		break;
+	}
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
 	if (!xlate) {
@@ -884,27 +1040,104 @@ static int sh_mobile_ceu_set_fmt(struct soc_camera_device *icd,
 	pix->pixelformat = xlate->cam_fmt->fourcc;
 	ret = v4l2_device_call_until_err(&ici->v4l2_dev, (__u32)icd, video, s_fmt, f);
 	pix->pixelformat = pixfmt;
-	if (!ret) {
-		icd->buswidth = xlate->buswidth;
-		icd->current_fmt = xlate->host_fmt;
-		cam->camera_fmt = xlate->cam_fmt;
-		cam->camera_rect.width = pix->width;
-		cam->camera_rect.height = pix->height;
-		cam->camera_rect.left = icd->rect_current.left;
-		cam->camera_rect.top = icd->rect_current.top;
+	dev_dbg(&icd->dev, "Camera %d fmt %ux%u, requested %ux%u, max %ux%u\n",
+		ret, pix->width, pix->height, width, height,
+		icd->rect_max.width, icd->rect_max.height);
+	if (ret < 0)
+		return ret;
+
+	switch (pixfmt) {
+	case V4L2_PIX_FMT_NV12:
+	case V4L2_PIX_FMT_NV21:
+	case V4L2_PIX_FMT_NV16:
+	case V4L2_PIX_FMT_NV61:
+		pcdev->image_mode = 1;
+		break;
+	default:
+		pcdev->image_mode = 0;
 	}
 
-	return ret;
+	if ((abs(width - pix->width) < 4 && abs(height - pix->height) < 4) ||
+	    !pcdev->image_mode || is_interlaced) {
+		hscale = 0;
+		vscale = 0;
+		goto out;
+	}
+
+	/* Camera set a format, but geometry is not precise, try to improve */
+	/*
+	 * FIXME: when soc-camera is converted to implement traditional S_FMT
+	 * and S_CROP semantics, replace CEU limits with camera maxima
+	 */
+	tmp_w = pix->width;
+	tmp_h = pix->height;
+	while ((width > tmp_w || height > tmp_h) &&
+	       tmp_w < 2560 && tmp_h < 1920) {
+		tmp_w = min(2 * tmp_w, (__u32)2560);
+		tmp_h = min(2 * tmp_h, (__u32)1920);
+		pix->width = tmp_w;
+		pix->height = tmp_h;
+		pix->pixelformat = xlate->cam_fmt->fourcc;
+		ret = v4l2_device_call_until_err(&ici->v4l2_dev, (__u32)icd,
+						 video, s_fmt, f);
+		pix->pixelformat = pixfmt;
+		dev_dbg(&icd->dev, "Camera scaled to %ux%u\n",
+			pix->width, pix->height);
+		if (ret < 0) {
+			/* This shouldn't happen */
+			dev_err(&icd->dev, "Client failed to set format: %d\n",
+				ret);
+			return ret;
+		}
+	}
+
+	/* We cannot scale up */
+	if (width > pix->width)
+		width = pix->width;
+
+	if (height > pix->height)
+		height = pix->height;
+
+	/* Let's rock: scale pix->{width x height} down to width x height */
+	hscale = calc_scale(pix->width, &width);
+	vscale = calc_scale(pix->height, &height);
+
+	dev_dbg(&icd->dev, "W: %u : 0x%x = %u, H: %u : 0x%x = %u\n",
+		pix->width, hscale, width, pix->height, vscale, height);
+
+out:
+	pcdev->cflcr = hscale | (vscale << 16);
+
+	icd->buswidth = xlate->buswidth;
+	icd->current_fmt = xlate->host_fmt;
+	cam->camera_fmt = xlate->cam_fmt;
+	cam->camera_rect.width = pix->width;
+	cam->camera_rect.height = pix->height;
+
+	icd->rect_max.left = size_dst(cam->camera_max.left, hscale);
+	icd->rect_max.width = size_dst(cam->camera_max.width, hscale);
+	icd->rect_max.top = size_dst(cam->camera_max.top, vscale);
+	icd->rect_max.height = size_dst(cam->camera_max.height, vscale);
+
+	icd->rect_current.left = icd->rect_max.left;
+	icd->rect_current.top = icd->rect_max.top;
+
+	pcdev->is_interlaced = is_interlaced;
+
+	pix->width = width;
+	pix->height = height;
+
+	return 0;
 }
 
 static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd,
 				 struct v4l2_format *f)
 {
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
-	struct sh_mobile_ceu_dev *pcdev = ici->priv;
 	const struct soc_camera_format_xlate *xlate;
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 	__u32 pixfmt = pix->pixelformat;
+	int width, height;
 	int ret;
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
@@ -918,6 +1151,9 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd,
 	v4l_bound_align_image(&pix->width, 2, 2560, 1,
 			      &pix->height, 4, 1920, 2, 0);
 
+	width = pix->width;
+	height = pix->height;
+
 	pix->bytesperline = pix->width *
 		DIV_ROUND_UP(xlate->host_fmt->depth, 8);
 	pix->sizeimage = pix->height * pix->bytesperline;
@@ -925,24 +1161,38 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd,
 	pix->pixelformat = xlate->cam_fmt->fourcc;
 
 	/* limit to sensor capabilities */
-	ret = v4l2_device_call_until_err(&ici->v4l2_dev, (__u32)icd, video, try_fmt, f);
+	ret = v4l2_device_call_until_err(&ici->v4l2_dev, (__u32)icd, video,
+					 try_fmt, f);
 	pix->pixelformat = pixfmt;
 	if (ret < 0)
 		return ret;
 
-	switch (pix->field) {
-	case V4L2_FIELD_INTERLACED:
-		pcdev->is_interlaced = 1;
-		break;
-	case V4L2_FIELD_ANY:
-		pix->field = V4L2_FIELD_NONE;
-		/* fall-through */
-	case V4L2_FIELD_NONE:
-		pcdev->is_interlaced = 0;
-		break;
-	default:
-		ret = -EINVAL;
-		break;
+	switch (pixfmt) {
+	case V4L2_PIX_FMT_NV12:
+	case V4L2_PIX_FMT_NV21:
+	case V4L2_PIX_FMT_NV16:
+	case V4L2_PIX_FMT_NV61:
+		/* FIXME: check against rect_max after converting soc-camera */
+		/* We can scale precisely, need a bigger image from camera */
+		if (pix->width < width || pix->height < height) {
+			int tmp_w = pix->width, tmp_h = pix->height;
+			pix->width = 2560;
+			pix->height = 1920;
+			ret = v4l2_device_call_until_err(&ici->v4l2_dev,
+							 (__u32)icd, video,
+							 try_fmt, f);
+			if (ret < 0) {
+				/* Shouldn't actually happen... */
+				dev_err(&icd->dev,
+					"FIXME: try_fmt() returned %d\n", ret);
+				pix->width = tmp_w;
+				pix->height = tmp_h;
+			}
+		}
+		if (pix->width > width)
+			pix->width = width;
+		if (pix->height > height)
+			pix->height = height;
 	}
 
 	return ret;
-- 
cgit v1.2.3


From 08590b9613f7f624fe3a052586eea2dbb3584b38 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 25 Aug 2009 11:46:54 -0300
Subject: V4L/DVB (12529): soc-camera: switch to s_crop v4l2-subdev video
 operation

Remove set_crop soc-camera device method and switch to s_crop from v4l2-subdev
video operations. Also extend non-i2c drivers to also hold a pointer to their
v4l2-subdev instance in control device driver-data, i.e., in
dev_get_drvdata((struct device *)to_soc_camera_control(icd))

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/mt9m001.c              |  23 +++---
 drivers/media/video/mt9m111.c              |   9 +--
 drivers/media/video/mt9t031.c              |   9 +--
 drivers/media/video/mt9v022.c              |  23 +++---
 drivers/media/video/mx1_camera.c           |   8 ++-
 drivers/media/video/mx3_camera.c           |   7 +-
 drivers/media/video/ov772x.c               |  19 -----
 drivers/media/video/pxa_camera.c           |   7 +-
 drivers/media/video/sh_mobile_ceu_camera.c | 110 +++++++++++++++--------------
 drivers/media/video/soc_camera.c           |   4 +-
 drivers/media/video/soc_camera_platform.c  |  28 ++++----
 drivers/media/video/tw9910.c               |  31 ++++----
 12 files changed, 141 insertions(+), 137 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/mt9m001.c b/drivers/media/video/mt9m001.c
index 8b36a74b1be..6e762cd06e3 100644
--- a/drivers/media/video/mt9m001.c
+++ b/drivers/media/video/mt9m001.c
@@ -194,11 +194,12 @@ static unsigned long mt9m001_query_bus_param(struct soc_camera_device *icd)
 	return soc_camera_apply_sensor_flags(icl, flags);
 }
 
-static int mt9m001_set_crop(struct soc_camera_device *icd,
-			    struct v4l2_rect *rect)
+static int mt9m001_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct v4l2_rect *rect = &a->c;
+	struct i2c_client *client = sd->priv;
 	struct mt9m001 *mt9m001 = to_mt9m001(client);
+	struct soc_camera_device *icd = client->dev.platform_data;
 	int ret;
 	const u16 hblank = 9, vblank = 25;
 
@@ -239,15 +240,17 @@ static int mt9m001_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
 {
 	struct i2c_client *client = sd->priv;
 	struct soc_camera_device *icd = client->dev.platform_data;
-	struct v4l2_rect rect = {
-		.left	= icd->rect_current.left,
-		.top	= icd->rect_current.top,
-		.width	= f->fmt.pix.width,
-		.height	= f->fmt.pix.height,
+	struct v4l2_crop a = {
+		.c = {
+			.left	= icd->rect_current.left,
+			.top	= icd->rect_current.top,
+			.width	= f->fmt.pix.width,
+			.height	= f->fmt.pix.height,
+		},
 	};
 
 	/* No support for scaling so far, just crop. TODO: use skipping */
-	return mt9m001_set_crop(icd, &rect);
+	return mt9m001_s_crop(sd, &a);
 }
 
 static int mt9m001_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
@@ -361,7 +364,6 @@ static const struct v4l2_queryctrl mt9m001_controls[] = {
 static struct soc_camera_ops mt9m001_ops = {
 	.init			= mt9m001_init,
 	.release		= mt9m001_release,
-	.set_crop		= mt9m001_set_crop,
 	.set_bus_param		= mt9m001_set_bus_param,
 	.query_bus_param	= mt9m001_query_bus_param,
 	.controls		= mt9m001_controls,
@@ -575,6 +577,7 @@ static struct v4l2_subdev_video_ops mt9m001_subdev_video_ops = {
 	.s_stream	= mt9m001_s_stream,
 	.s_fmt		= mt9m001_s_fmt,
 	.try_fmt	= mt9m001_try_fmt,
+	.s_crop		= mt9m001_s_crop,
 };
 
 static struct v4l2_subdev_ops mt9m001_subdev_ops = {
diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c
index 45101fd90ce..bef41517018 100644
--- a/drivers/media/video/mt9m111.c
+++ b/drivers/media/video/mt9m111.c
@@ -395,11 +395,12 @@ static int mt9m111_set_bus_param(struct soc_camera_device *icd, unsigned long f)
 	return 0;
 }
 
-static int mt9m111_set_crop(struct soc_camera_device *icd,
-			    struct v4l2_rect *rect)
+static int mt9m111_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct v4l2_rect *rect = &a->c;
+	struct i2c_client *client = sd->priv;
 	struct mt9m111 *mt9m111 = to_mt9m111(client);
+	struct soc_camera_device *icd = client->dev.platform_data;
 	int ret;
 
 	dev_dbg(&icd->dev, "%s left=%d, top=%d, width=%d, height=%d\n",
@@ -601,7 +602,6 @@ static struct soc_camera_ops mt9m111_ops = {
 	.init			= mt9m111_init,
 	.resume			= mt9m111_resume,
 	.release		= mt9m111_release,
-	.set_crop		= mt9m111_set_crop,
 	.query_bus_param	= mt9m111_query_bus_param,
 	.set_bus_param		= mt9m111_set_bus_param,
 	.controls		= mt9m111_controls,
@@ -908,6 +908,7 @@ static struct v4l2_subdev_core_ops mt9m111_subdev_core_ops = {
 static struct v4l2_subdev_video_ops mt9m111_subdev_video_ops = {
 	.s_fmt		= mt9m111_s_fmt,
 	.try_fmt	= mt9m111_try_fmt,
+	.s_crop		= mt9m111_s_crop,
 };
 
 static struct v4l2_subdev_ops mt9m111_subdev_ops = {
diff --git a/drivers/media/video/mt9t031.c b/drivers/media/video/mt9t031.c
index 125973bf08b..3fa87be2fc6 100644
--- a/drivers/media/video/mt9t031.c
+++ b/drivers/media/video/mt9t031.c
@@ -321,11 +321,12 @@ static int mt9t031_set_params(struct soc_camera_device *icd,
 	return ret < 0 ? ret : 0;
 }
 
-static int mt9t031_set_crop(struct soc_camera_device *icd,
-			    struct v4l2_rect *rect)
+static int mt9t031_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct v4l2_rect *rect = &a->c;
+	struct i2c_client *client = sd->priv;
 	struct mt9t031 *mt9t031 = to_mt9t031(client);
+	struct soc_camera_device *icd = client->dev.platform_data;
 
 	/* Make sure we don't exceed sensor limits */
 	if (rect->left + rect->width > icd->rect_max.left + icd->rect_max.width)
@@ -495,7 +496,6 @@ static const struct v4l2_queryctrl mt9t031_controls[] = {
 static struct soc_camera_ops mt9t031_ops = {
 	.init			= mt9t031_init,
 	.release		= mt9t031_release,
-	.set_crop		= mt9t031_set_crop,
 	.set_bus_param		= mt9t031_set_bus_param,
 	.query_bus_param	= mt9t031_query_bus_param,
 	.controls		= mt9t031_controls,
@@ -689,6 +689,7 @@ static struct v4l2_subdev_video_ops mt9t031_subdev_video_ops = {
 	.s_stream	= mt9t031_s_stream,
 	.s_fmt		= mt9t031_s_fmt,
 	.try_fmt	= mt9t031_try_fmt,
+	.s_crop		= mt9t031_s_crop,
 };
 
 static struct v4l2_subdev_ops mt9t031_subdev_ops = {
diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c
index d2b0981ec1c..e609ff51aa6 100644
--- a/drivers/media/video/mt9v022.c
+++ b/drivers/media/video/mt9v022.c
@@ -248,10 +248,11 @@ static unsigned long mt9v022_query_bus_param(struct soc_camera_device *icd)
 		width_flag;
 }
 
-static int mt9v022_set_crop(struct soc_camera_device *icd,
-			    struct v4l2_rect *rect)
+static int mt9v022_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct v4l2_rect *rect = &a->c;
+	struct i2c_client *client = sd->priv;
+	struct soc_camera_device *icd = client->dev.platform_data;
 	int ret;
 
 	/* Like in example app. Contradicts the datasheet though */
@@ -297,11 +298,13 @@ static int mt9v022_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
 	struct mt9v022 *mt9v022 = to_mt9v022(client);
 	struct soc_camera_device *icd = client->dev.platform_data;
 	struct v4l2_pix_format *pix = &f->fmt.pix;
-	struct v4l2_rect rect = {
-		.left	= icd->rect_current.left,
-		.top	= icd->rect_current.top,
-		.width	= pix->width,
-		.height	= pix->height,
+	struct v4l2_crop a = {
+		.c = {
+			.left	= icd->rect_current.left,
+			.top	= icd->rect_current.top,
+			.width	= pix->width,
+			.height	= pix->height,
+		},
 	};
 
 	/* The caller provides a supported format, as verified per call to
@@ -325,7 +328,7 @@ static int mt9v022_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
 	}
 
 	/* No support for scaling on this camera, just crop. */
-	return mt9v022_set_crop(icd, &rect);
+	return mt9v022_s_crop(sd, &a);
 }
 
 static int mt9v022_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
@@ -454,7 +457,6 @@ static const struct v4l2_queryctrl mt9v022_controls[] = {
 
 static struct soc_camera_ops mt9v022_ops = {
 	.init			= mt9v022_init,
-	.set_crop		= mt9v022_set_crop,
 	.set_bus_param		= mt9v022_set_bus_param,
 	.query_bus_param	= mt9v022_query_bus_param,
 	.controls		= mt9v022_controls,
@@ -700,6 +702,7 @@ static struct v4l2_subdev_video_ops mt9v022_subdev_video_ops = {
 	.s_stream	= mt9v022_s_stream,
 	.s_fmt		= mt9v022_s_fmt,
 	.try_fmt	= mt9v022_try_fmt,
+	.s_crop		= mt9v022_s_crop,
 };
 
 static struct v4l2_subdev_ops mt9v022_subdev_ops = {
diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c
index 948a4714be9..add496fca4d 100644
--- a/drivers/media/video/mx1_camera.c
+++ b/drivers/media/video/mx1_camera.c
@@ -463,9 +463,13 @@ static void mx1_camera_remove_device(struct soc_camera_device *icd)
 }
 
 static int mx1_camera_set_crop(struct soc_camera_device *icd,
-			       struct v4l2_rect *rect)
+			       struct v4l2_crop *a)
 {
-	return icd->ops->set_crop(icd, rect);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct device *control = to_soc_camera_control(icd);
+	struct v4l2_subdev *sd = dev_get_drvdata(control);
+
+	return v4l2_subdev_call(sd, video, s_crop, a);
 }
 
 static int mx1_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c
index 6c3b7f9b906..de7ebfbf039 100644
--- a/drivers/media/video/mx3_camera.c
+++ b/drivers/media/video/mx3_camera.c
@@ -781,10 +781,13 @@ static int acquire_dma_channel(struct mx3_camera_dev *mx3_cam)
 }
 
 static int mx3_camera_set_crop(struct soc_camera_device *icd,
-			       struct v4l2_rect *rect)
+			       struct v4l2_crop *a)
 {
+	struct v4l2_rect *rect = &a->c;
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	struct mx3_camera_dev *mx3_cam = ici->priv;
+	struct device *control = to_soc_camera_control(icd);
+	struct v4l2_subdev *sd = dev_get_drvdata(control);
 
 	/*
 	 * We now know pixel formats and can decide upon DMA-channel(s)
@@ -798,7 +801,7 @@ static int mx3_camera_set_crop(struct soc_camera_device *icd,
 
 	configure_geometry(mx3_cam, rect);
 
-	return icd->ops->set_crop(icd, rect);
+	return v4l2_subdev_call(sd, video, s_crop, a);
 }
 
 static int mx3_camera_set_fmt(struct soc_camera_device *icd,
diff --git a/drivers/media/video/ov772x.c b/drivers/media/video/ov772x.c
index 03488f9e1c8..bbe6f2d71c1 100644
--- a/drivers/media/video/ov772x.c
+++ b/drivers/media/video/ov772x.c
@@ -955,24 +955,6 @@ ov772x_set_fmt_error:
 	return ret;
 }
 
-/* Cannot crop, just return the current geometry */
-static int ov772x_set_crop(struct soc_camera_device *icd,
-			   struct v4l2_rect *rect)
-{
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct ov772x_priv *priv = to_ov772x(client);
-
-	if (!priv->fmt || !priv->win)
-		return -EINVAL;
-
-	rect->left = 0;
-	rect->top = 0;
-	rect->width = priv->win->width;
-	rect->height = priv->win->height;
-
-	return 0;
-}
-
 static int ov772x_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
 {
 	struct i2c_client *client = sd->priv;
@@ -1060,7 +1042,6 @@ static int ov772x_video_probe(struct soc_camera_device *icd,
 }
 
 static struct soc_camera_ops ov772x_ops = {
-	.set_crop		= ov772x_set_crop,
 	.set_bus_param		= ov772x_set_bus_param,
 	.query_bus_param	= ov772x_query_bus_param,
 	.controls		= ov772x_controls,
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
index 0e4daaad2f4..c38ce84b944 100644
--- a/drivers/media/video/pxa_camera.c
+++ b/drivers/media/video/pxa_camera.c
@@ -1281,10 +1281,13 @@ static int pxa_camera_get_formats(struct soc_camera_device *icd, int idx,
 }
 
 static int pxa_camera_set_crop(struct soc_camera_device *icd,
-			       struct v4l2_rect *rect)
+			       struct v4l2_crop *a)
 {
+	struct v4l2_rect *rect = &a->c;
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	struct pxa_camera_dev *pcdev = ici->priv;
+	struct device *control = to_soc_camera_control(icd);
+	struct v4l2_subdev *sd = dev_get_drvdata(control);
 	struct soc_camera_sense sense = {
 		.master_clock = pcdev->mclk,
 		.pixel_clock_max = pcdev->ciclk / 4,
@@ -1295,7 +1298,7 @@ static int pxa_camera_set_crop(struct soc_camera_device *icd,
 	if (pcdev->platform_flags & PXA_CAMERA_PCLK_EN)
 		icd->sense = &sense;
 
-	ret = icd->ops->set_crop(icd, rect);
+	ret = v4l2_subdev_call(sd, video, s_crop, a);
 
 	icd->sense = NULL;
 
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index 499d1a235fd..726cf0e4dc2 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -846,12 +846,16 @@ static bool is_inside(struct v4l2_rect *r1, struct v4l2_rect *r2)
  * 3. if (2) failed, try to request the maximum image
  */
 static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd,
-				  struct v4l2_rect *rect)
+				  struct v4l2_crop *a)
 {
+	struct v4l2_rect *rect = &a->c;
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
-	struct v4l2_rect cam_rect, target, cam_max;
+	struct v4l2_crop cam_crop;
+	struct v4l2_rect *cam_rect = &cam_crop.c, target, cam_max;
 	struct sh_mobile_ceu_cam *cam = icd->host_priv;
+	struct device *control = to_soc_camera_control(icd);
+	struct v4l2_subdev *sd = dev_get_drvdata(control);
 	unsigned int hscale = pcdev->cflcr & 0xffff;
 	unsigned int vscale = (pcdev->cflcr >> 16) & 0xffff;
 	unsigned short width, height;
@@ -859,80 +863,80 @@ static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd,
 	int ret;
 
 	/* Scale back up into client units */
-	cam_rect.left	= size_src(rect->left, hscale);
-	cam_rect.width	= size_src(rect->width, hscale);
-	cam_rect.top	= size_src(rect->top, vscale);
-	cam_rect.height	= size_src(rect->height, vscale);
+	cam_rect->left	= size_src(rect->left, hscale);
+	cam_rect->width	= size_src(rect->width, hscale);
+	cam_rect->top	= size_src(rect->top, vscale);
+	cam_rect->height	= size_src(rect->height, vscale);
 
-	target = cam_rect;
+	target = *cam_rect;
 
 	capsr = capture_save_reset(pcdev);
 	dev_dbg(&icd->dev, "CAPSR 0x%x, CFLCR 0x%x\n", capsr, pcdev->cflcr);
 
 	/* First attempt - see if the client can deliver a perfect result */
-	ret = icd->ops->set_crop(icd, &cam_rect);
+	ret = v4l2_subdev_call(sd, video, s_crop, &cam_crop);
 	if (!ret && !memcmp(&target, &cam_rect, sizeof(target))) {
 		dev_dbg(&icd->dev, "Camera S_CROP successful for %ux%u@%u:%u\n",
-			cam_rect.width, cam_rect.height,
-			cam_rect.left, cam_rect.top);
+			cam_rect->width, cam_rect->height,
+			cam_rect->left, cam_rect->top);
 		goto ceu_set_rect;
 	}
 
 	/* Try to fix cropping, that camera hasn't managed to do */
 	dev_dbg(&icd->dev, "Fix camera S_CROP %d for %ux%u@%u:%u"
 		" to %ux%u@%u:%u\n",
-		ret, cam_rect.width, cam_rect.height,
-		cam_rect.left, cam_rect.top,
+		ret, cam_rect->width, cam_rect->height,
+		cam_rect->left, cam_rect->top,
 		target.width, target.height, target.left, target.top);
 
 	/*
 	 * Popular special case - some cameras can only handle fixed sizes like
 	 * QVGA, VGA,... Take care to avoid infinite loop.
 	 */
-	width = max(cam_rect.width, 1);
-	height = max(cam_rect.height, 1);
+	width = max(cam_rect->width, 1);
+	height = max(cam_rect->height, 1);
 	cam_max.width = size_src(icd->rect_max.width, hscale);
 	cam_max.left = size_src(icd->rect_max.left, hscale);
 	cam_max.height = size_src(icd->rect_max.height, vscale);
 	cam_max.top = size_src(icd->rect_max.top, vscale);
-	while (!ret && (is_smaller(&cam_rect, &target) ||
-			is_inside(&cam_rect, &target)) &&
+	while (!ret && (is_smaller(cam_rect, &target) ||
+			is_inside(cam_rect, &target)) &&
 	       cam_max.width >= width && cam_max.height >= height) {
 
 		width *= 2;
 		height *= 2;
-		cam_rect.width = width;
-		cam_rect.height = height;
+		cam_rect->width = width;
+		cam_rect->height = height;
 
 		/* We do not know what the camera is capable of, play safe */
-		if (cam_rect.left > target.left)
-			cam_rect.left = cam_max.left;
+		if (cam_rect->left > target.left)
+			cam_rect->left = cam_max.left;
 
-		if (cam_rect.left + cam_rect.width < target.left + target.width)
-			cam_rect.width = target.left + target.width -
-				cam_rect.left;
+		if (cam_rect->left + cam_rect->width < target.left + target.width)
+			cam_rect->width = target.left + target.width -
+				cam_rect->left;
 
-		if (cam_rect.top > target.top)
-			cam_rect.top = cam_max.top;
+		if (cam_rect->top > target.top)
+			cam_rect->top = cam_max.top;
 
-		if (cam_rect.top + cam_rect.height < target.top + target.height)
-			cam_rect.height = target.top + target.height -
-				cam_rect.top;
+		if (cam_rect->top + cam_rect->height < target.top + target.height)
+			cam_rect->height = target.top + target.height -
+				cam_rect->top;
 
-		if (cam_rect.width + cam_rect.left >
+		if (cam_rect->width + cam_rect->left >
 		    cam_max.width + cam_max.left)
-			cam_rect.left = max(cam_max.width + cam_max.left -
-					    cam_rect.width, cam_max.left);
+			cam_rect->left = max(cam_max.width + cam_max.left -
+					     cam_rect->width, cam_max.left);
 
-		if (cam_rect.height + cam_rect.top >
+		if (cam_rect->height + cam_rect->top >
 		    cam_max.height + cam_max.top)
-			cam_rect.top = max(cam_max.height + cam_max.top -
-					   cam_rect.height, cam_max.top);
+			cam_rect->top = max(cam_max.height + cam_max.top -
+					    cam_rect->height, cam_max.top);
 
-		ret = icd->ops->set_crop(icd, &cam_rect);
+		ret = v4l2_subdev_call(sd, video, s_crop, &cam_crop);
 		dev_dbg(&icd->dev, "Camera S_CROP %d for %ux%u@%u:%u\n",
-			ret, cam_rect.width, cam_rect.height,
-			cam_rect.left, cam_rect.top);
+			ret, cam_rect->width, cam_rect->height,
+			cam_rect->left, cam_rect->top);
 	}
 
 	/*
@@ -941,30 +945,30 @@ static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd,
 	 */
 	if ((ret < 0 && (is_smaller(&icd->rect_current, rect) ||
 			 is_inside(&icd->rect_current, rect))) ||
-	    is_smaller(&cam_rect, &target) || is_inside(&cam_rect, &target)) {
+	    is_smaller(cam_rect, &target) || is_inside(cam_rect, &target)) {
 		/*
 		 * The camera failed to configure a suitable cropping,
 		 * we cannot use the current rectangle, set to max
 		 */
-		cam_rect = cam_max;
-		ret = icd->ops->set_crop(icd, &cam_rect);
+		*cam_rect = cam_max;
+		ret = v4l2_subdev_call(sd, video, s_crop, &cam_crop);
 		dev_dbg(&icd->dev, "Camera S_CROP %d for max %ux%u@%u:%u\n",
-			ret, cam_rect.width, cam_rect.height,
-			cam_rect.left, cam_rect.top);
-		if (ret < 0)
+			ret, cam_rect->width, cam_rect->height,
+			cam_rect->left, cam_rect->top);
+		if (ret < 0 && ret != -ENOIOCTLCMD)
 			/* All failed, hopefully resume current capture */
 			goto resume_capture;
 
 		/* Finally, adjust the target rectangle */
-		if (target.width > cam_rect.width)
-			target.width = cam_rect.width;
-		if (target.height > cam_rect.height)
-			target.height = cam_rect.height;
-		if (target.left + target.width > cam_rect.left + cam_rect.width)
-			target.left = cam_rect.left + cam_rect.width -
+		if (target.width > cam_rect->width)
+			target.width = cam_rect->width;
+		if (target.height > cam_rect->height)
+			target.height = cam_rect->height;
+		if (target.left + target.width > cam_rect->left + cam_rect->width)
+			target.left = cam_rect->left + cam_rect->width -
 				target.width;
-		if (target.top + target.height > cam_rect.top + cam_rect.height)
-			target.top = cam_rect.top + cam_rect.height -
+		if (target.top + target.height > cam_rect->top + cam_rect->height)
+			target.top = cam_rect->top + cam_rect->height -
 				target.height;
 	}
 
@@ -978,14 +982,14 @@ static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd,
 	 */
 	dev_dbg(&icd->dev,
 		"SH S_CROP from %ux%u@%u:%u to %ux%u@%u:%u, scale to %ux%u@%u:%u\n",
-		cam_rect.width, cam_rect.height, cam_rect.left, cam_rect.top,
+		cam_rect->width, cam_rect->height, cam_rect->left, cam_rect->top,
 		target.width, target.height, target.left, target.top,
 		rect->width, rect->height, rect->left, rect->top);
 
 	ret = 0;
 
 ceu_set_rect:
-	cam->camera_rect = cam_rect;
+	cam->camera_rect = *cam_rect;
 
 	rect->width	= size_dst(target.width, hscale);
 	rect->left	= size_dst(target.left, hscale);
diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index 21a8aa586da..d9ccc286659 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -797,7 +797,7 @@ static int soc_camera_s_crop(struct file *file, void *fh,
 		rect.top = icd->rect_max.height + icd->rect_max.top -
 			rect.height;
 
-	ret = ici->ops->set_crop(icd, &rect);
+	ret = ici->ops->set_crop(icd, a);
 	if (!ret)
 		icd->rect_current = rect;
 
@@ -970,7 +970,7 @@ static int soc_camera_probe(struct device *dev)
 
 		/* FIXME: this is racy, have to use driver-binding notification */
 		control = to_soc_camera_control(icd);
-		if (!control || !control->driver ||
+		if (!control || !control->driver || !dev_get_drvdata(control) ||
 		    !try_module_get(control->driver->owner)) {
 			icl->del_device(icl);
 			goto enodrv;
diff --git a/drivers/media/video/soc_camera_platform.c b/drivers/media/video/soc_camera_platform.c
index 9e406c113aa..aec2cadbd2e 100644
--- a/drivers/media/video/soc_camera_platform.c
+++ b/drivers/media/video/soc_camera_platform.c
@@ -25,10 +25,15 @@ struct soc_camera_platform_priv {
 	struct soc_camera_data_format format;
 };
 
-static struct soc_camera_platform_info *
-soc_camera_platform_get_info(struct soc_camera_device *icd)
+static struct soc_camera_platform_priv *get_priv(struct platform_device *pdev)
 {
-	struct platform_device *pdev = to_platform_device(dev_get_drvdata(&icd->dev));
+	struct v4l2_subdev *subdev = platform_get_drvdata(pdev);
+	return container_of(subdev, struct soc_camera_platform_priv, subdev);
+}
+
+static struct soc_camera_platform_info *get_info(struct soc_camera_device *icd)
+{
+	struct platform_device *pdev = to_platform_device(to_soc_camera_control(icd));
 	return pdev->dev.platform_data;
 }
 
@@ -47,16 +52,10 @@ static int soc_camera_platform_set_bus_param(struct soc_camera_device *icd,
 static unsigned long
 soc_camera_platform_query_bus_param(struct soc_camera_device *icd)
 {
-	struct soc_camera_platform_info *p = soc_camera_platform_get_info(icd);
+	struct soc_camera_platform_info *p = get_info(icd);
 	return p->bus_param;
 }
 
-static int soc_camera_platform_set_crop(struct soc_camera_device *icd,
-					struct v4l2_rect *rect)
-{
-	return 0;
-}
-
 static int soc_camera_platform_try_fmt(struct v4l2_subdev *sd,
 				       struct v4l2_format *f)
 {
@@ -71,7 +70,7 @@ static int soc_camera_platform_try_fmt(struct v4l2_subdev *sd,
 static void soc_camera_platform_video_probe(struct soc_camera_device *icd,
 					    struct platform_device *pdev)
 {
-	struct soc_camera_platform_priv *priv = platform_get_drvdata(pdev);
+	struct soc_camera_platform_priv *priv = get_priv(pdev);
 	struct soc_camera_platform_info *p = pdev->dev.platform_data;
 
 	priv->format.name = p->format_name;
@@ -96,7 +95,6 @@ static struct v4l2_subdev_ops platform_subdev_ops = {
 };
 
 static struct soc_camera_ops soc_camera_platform_ops = {
-	.set_crop		= soc_camera_platform_set_crop,
 	.set_bus_param		= soc_camera_platform_set_bus_param,
 	.query_bus_param	= soc_camera_platform_query_bus_param,
 };
@@ -124,7 +122,9 @@ static int soc_camera_platform_probe(struct platform_device *pdev)
 
 	icd = to_soc_camera_dev(p->dev);
 
-	platform_set_drvdata(pdev, priv);
+	/* soc-camera convention: control's drvdata points to the subdev */
+	platform_set_drvdata(pdev, &priv->subdev);
+	/* Set the control device reference */
 	dev_set_drvdata(&icd->dev, &pdev->dev);
 
 	icd->width_min		= 0;
@@ -158,7 +158,7 @@ evdrs:
 
 static int soc_camera_platform_remove(struct platform_device *pdev)
 {
-	struct soc_camera_platform_priv *priv = platform_get_drvdata(pdev);
+	struct soc_camera_platform_priv *priv = get_priv(pdev);
 	struct soc_camera_platform_info *p = pdev->dev.platform_data;
 	struct soc_camera_device *icd = to_soc_camera_dev(p->dev);
 
diff --git a/drivers/media/video/tw9910.c b/drivers/media/video/tw9910.c
index 735d0bd4bb1..b6b15468b40 100644
--- a/drivers/media/video/tw9910.c
+++ b/drivers/media/video/tw9910.c
@@ -616,11 +616,12 @@ static int tw9910_s_register(struct v4l2_subdev *sd,
 }
 #endif
 
-static int tw9910_set_crop(struct soc_camera_device *icd,
-			   struct v4l2_rect *rect)
+static int tw9910_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct v4l2_rect *rect = &a->c;
+	struct i2c_client *client = sd->priv;
 	struct tw9910_priv *priv = to_tw9910(client);
+	struct soc_camera_device *icd = client->dev.platform_data;
 	int                 ret  = -EINVAL;
 	u8                  val;
 
@@ -716,15 +717,15 @@ tw9910_set_fmt_error:
 
 static int tw9910_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
 {
-	struct i2c_client *client = sd->priv;
-	struct soc_camera_device *icd = client->dev.platform_data;
 	struct v4l2_pix_format *pix = &f->fmt.pix;
-	/* See tw9910_set_crop() - no proper cropping support */
-	struct v4l2_rect rect = {
-		.left	= 0,
-		.top	= 0,
-		.width	= pix->width,
-		.height	= pix->height,
+	/* See tw9910_s_crop() - no proper cropping support */
+	struct v4l2_crop a = {
+		.c = {
+			.left	= 0,
+			.top	= 0,
+			.width	= pix->width,
+			.height	= pix->height,
+		},
 	};
 	int i, ret;
 
@@ -738,10 +739,10 @@ static int tw9910_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
 	if (i == ARRAY_SIZE(tw9910_color_fmt))
 		return -EINVAL;
 
-	ret = tw9910_set_crop(icd, &rect);
+	ret = tw9910_s_crop(sd, &a);
 	if (!ret) {
-		pix->width = rect.width;
-		pix->height = rect.height;
+		pix->width = a.c.width;
+		pix->height = a.c.height;
 	}
 	return ret;
 }
@@ -821,7 +822,6 @@ static int tw9910_video_probe(struct soc_camera_device *icd,
 }
 
 static struct soc_camera_ops tw9910_ops = {
-	.set_crop		= tw9910_set_crop,
 	.set_bus_param		= tw9910_set_bus_param,
 	.query_bus_param	= tw9910_query_bus_param,
 	.enum_input		= tw9910_enum_input,
@@ -840,6 +840,7 @@ static struct v4l2_subdev_video_ops tw9910_subdev_video_ops = {
 	.s_stream	= tw9910_s_stream,
 	.s_fmt		= tw9910_s_fmt,
 	.try_fmt	= tw9910_try_fmt,
+	.s_crop		= tw9910_s_crop,
 };
 
 static struct v4l2_subdev_ops tw9910_subdev_ops = {
-- 
cgit v1.2.3


From c9c1f1c0dbe90b82939917fdc3e4c9ccad42342d Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 25 Aug 2009 11:46:59 -0300
Subject: V4L/DVB (12530): soc-camera: switch to using v4l2_subdev_call()

Use v4l2_subdev_call() instead of v4l2_device_call_until_err() in all host
drivers and in soc-camera core.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/mx1_camera.c           | 12 +++++-------
 drivers/media/video/mx3_camera.c           | 10 +++++-----
 drivers/media/video/pxa_camera.c           |  9 +++++----
 drivers/media/video/sh_mobile_ceu_camera.c | 17 +++++++----------
 drivers/media/video/soc_camera.c           | 30 ++++++++++++++++--------------
 5 files changed, 38 insertions(+), 40 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c
index add496fca4d..ed7856bdad4 100644
--- a/drivers/media/video/mx1_camera.c
+++ b/drivers/media/video/mx1_camera.c
@@ -465,9 +465,7 @@ static void mx1_camera_remove_device(struct soc_camera_device *icd)
 static int mx1_camera_set_crop(struct soc_camera_device *icd,
 			       struct v4l2_crop *a)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
-	struct device *control = to_soc_camera_control(icd);
-	struct v4l2_subdev *sd = dev_get_drvdata(control);
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 
 	return v4l2_subdev_call(sd, video, s_crop, a);
 }
@@ -539,7 +537,7 @@ static int mx1_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
 static int mx1_camera_set_fmt(struct soc_camera_device *icd,
 			      struct v4l2_format *f)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	const struct soc_camera_format_xlate *xlate;
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 	int ret;
@@ -550,7 +548,7 @@ static int mx1_camera_set_fmt(struct soc_camera_device *icd,
 		return -EINVAL;
 	}
 
-	ret = v4l2_device_call_until_err(&ici->v4l2_dev, 0, video, s_fmt, f);
+	ret = v4l2_subdev_call(sd, video, s_fmt, f);
 	if (!ret) {
 		icd->buswidth = xlate->buswidth;
 		icd->current_fmt = xlate->host_fmt;
@@ -562,11 +560,11 @@ static int mx1_camera_set_fmt(struct soc_camera_device *icd,
 static int mx1_camera_try_fmt(struct soc_camera_device *icd,
 			      struct v4l2_format *f)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	/* TODO: limit to mx1 hardware capabilities */
 
 	/* limit to sensor capabilities */
-	return v4l2_device_call_until_err(&ici->v4l2_dev, 0, video, try_fmt, f);
+	return v4l2_subdev_call(sd, video, try_fmt, f);
 }
 
 static int mx1_camera_reqbufs(struct soc_camera_file *icf,
diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c
index de7ebfbf039..f7888f30da5 100644
--- a/drivers/media/video/mx3_camera.c
+++ b/drivers/media/video/mx3_camera.c
@@ -786,8 +786,7 @@ static int mx3_camera_set_crop(struct soc_camera_device *icd,
 	struct v4l2_rect *rect = &a->c;
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	struct mx3_camera_dev *mx3_cam = ici->priv;
-	struct device *control = to_soc_camera_control(icd);
-	struct v4l2_subdev *sd = dev_get_drvdata(control);
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 
 	/*
 	 * We now know pixel formats and can decide upon DMA-channel(s)
@@ -809,6 +808,7 @@ static int mx3_camera_set_fmt(struct soc_camera_device *icd,
 {
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	struct mx3_camera_dev *mx3_cam = ici->priv;
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	const struct soc_camera_format_xlate *xlate;
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 	struct v4l2_rect rect = {
@@ -837,7 +837,7 @@ static int mx3_camera_set_fmt(struct soc_camera_device *icd,
 
 	configure_geometry(mx3_cam, &rect);
 
-	ret = v4l2_device_call_until_err(&ici->v4l2_dev, 0, video, s_fmt, f);
+	ret = v4l2_subdev_call(sd, video, s_fmt, f);
 	if (!ret) {
 		icd->buswidth = xlate->buswidth;
 		icd->current_fmt = xlate->host_fmt;
@@ -849,7 +849,7 @@ static int mx3_camera_set_fmt(struct soc_camera_device *icd,
 static int mx3_camera_try_fmt(struct soc_camera_device *icd,
 			      struct v4l2_format *f)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	const struct soc_camera_format_xlate *xlate;
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 	__u32 pixfmt = pix->pixelformat;
@@ -875,7 +875,7 @@ static int mx3_camera_try_fmt(struct soc_camera_device *icd,
 	/* camera has to see its format, but the user the original one */
 	pix->pixelformat = xlate->cam_fmt->fourcc;
 	/* limit to sensor capabilities */
-	ret = v4l2_device_call_until_err(&ici->v4l2_dev, 0, video, try_fmt, f);
+	ret = v4l2_subdev_call(sd, video, try_fmt, f);
 	pix->pixelformat = xlate->host_fmt->fourcc;
 
 	field = pix->field;
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
index c38ce84b944..4bc2a4f81f7 100644
--- a/drivers/media/video/pxa_camera.c
+++ b/drivers/media/video/pxa_camera.c
@@ -1286,8 +1286,7 @@ static int pxa_camera_set_crop(struct soc_camera_device *icd,
 	struct v4l2_rect *rect = &a->c;
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	struct pxa_camera_dev *pcdev = ici->priv;
-	struct device *control = to_soc_camera_control(icd);
-	struct v4l2_subdev *sd = dev_get_drvdata(control);
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	struct soc_camera_sense sense = {
 		.master_clock = pcdev->mclk,
 		.pixel_clock_max = pcdev->ciclk / 4,
@@ -1323,6 +1322,7 @@ static int pxa_camera_set_fmt(struct soc_camera_device *icd,
 {
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	struct pxa_camera_dev *pcdev = ici->priv;
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	const struct soc_camera_data_format *cam_fmt = NULL;
 	const struct soc_camera_format_xlate *xlate = NULL;
 	struct soc_camera_sense sense = {
@@ -1346,7 +1346,7 @@ static int pxa_camera_set_fmt(struct soc_camera_device *icd,
 		icd->sense = &sense;
 
 	cam_f.fmt.pix.pixelformat = cam_fmt->fourcc;
-	ret = v4l2_device_call_until_err(&ici->v4l2_dev, 0, video, s_fmt, f);
+	ret = v4l2_subdev_call(sd, video, s_fmt, f);
 
 	icd->sense = NULL;
 
@@ -1375,6 +1375,7 @@ static int pxa_camera_try_fmt(struct soc_camera_device *icd,
 			      struct v4l2_format *f)
 {
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	const struct soc_camera_format_xlate *xlate;
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 	__u32 pixfmt = pix->pixelformat;
@@ -1404,7 +1405,7 @@ static int pxa_camera_try_fmt(struct soc_camera_device *icd,
 	/* camera has to see its format, but the user the original one */
 	pix->pixelformat = xlate->cam_fmt->fourcc;
 	/* limit to sensor capabilities */
-	ret = v4l2_device_call_until_err(&ici->v4l2_dev, 0, video, try_fmt, f);
+	ret = v4l2_subdev_call(sd, video, try_fmt, f);
 	pix->pixelformat = xlate->host_fmt->fourcc;
 
 	field = pix->field;
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index 726cf0e4dc2..28c3affe882 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -854,8 +854,7 @@ static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd,
 	struct v4l2_crop cam_crop;
 	struct v4l2_rect *cam_rect = &cam_crop.c, target, cam_max;
 	struct sh_mobile_ceu_cam *cam = icd->host_priv;
-	struct device *control = to_soc_camera_control(icd);
-	struct v4l2_subdev *sd = dev_get_drvdata(control);
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	unsigned int hscale = pcdev->cflcr & 0xffff;
 	unsigned int vscale = (pcdev->cflcr >> 16) & 0xffff;
 	unsigned short width, height;
@@ -1016,6 +1015,7 @@ static int sh_mobile_ceu_set_fmt(struct soc_camera_device *icd,
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
 	struct sh_mobile_ceu_cam *cam = icd->host_priv;
 	struct v4l2_pix_format *pix = &f->fmt.pix;
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	__u32 pixfmt = pix->pixelformat;
 	const struct soc_camera_format_xlate *xlate;
 	unsigned int width = pix->width, height = pix->height, tmp_w, tmp_h;
@@ -1042,7 +1042,7 @@ static int sh_mobile_ceu_set_fmt(struct soc_camera_device *icd,
 	}
 
 	pix->pixelformat = xlate->cam_fmt->fourcc;
-	ret = v4l2_device_call_until_err(&ici->v4l2_dev, (__u32)icd, video, s_fmt, f);
+	ret = v4l2_subdev_call(sd, video, s_fmt, f);
 	pix->pixelformat = pixfmt;
 	dev_dbg(&icd->dev, "Camera %d fmt %ux%u, requested %ux%u, max %ux%u\n",
 		ret, pix->width, pix->height, width, height,
@@ -1082,8 +1082,7 @@ static int sh_mobile_ceu_set_fmt(struct soc_camera_device *icd,
 		pix->width = tmp_w;
 		pix->height = tmp_h;
 		pix->pixelformat = xlate->cam_fmt->fourcc;
-		ret = v4l2_device_call_until_err(&ici->v4l2_dev, (__u32)icd,
-						 video, s_fmt, f);
+		ret = v4l2_subdev_call(sd, video, s_fmt, f);
 		pix->pixelformat = pixfmt;
 		dev_dbg(&icd->dev, "Camera scaled to %ux%u\n",
 			pix->width, pix->height);
@@ -1140,6 +1139,7 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd,
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	const struct soc_camera_format_xlate *xlate;
 	struct v4l2_pix_format *pix = &f->fmt.pix;
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	__u32 pixfmt = pix->pixelformat;
 	int width, height;
 	int ret;
@@ -1165,8 +1165,7 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd,
 	pix->pixelformat = xlate->cam_fmt->fourcc;
 
 	/* limit to sensor capabilities */
-	ret = v4l2_device_call_until_err(&ici->v4l2_dev, (__u32)icd, video,
-					 try_fmt, f);
+	ret = v4l2_subdev_call(sd, video, try_fmt, f);
 	pix->pixelformat = pixfmt;
 	if (ret < 0)
 		return ret;
@@ -1182,9 +1181,7 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd,
 			int tmp_w = pix->width, tmp_h = pix->height;
 			pix->width = 2560;
 			pix->height = 1920;
-			ret = v4l2_device_call_until_err(&ici->v4l2_dev,
-							 (__u32)icd, video,
-							 try_fmt, f);
+			ret = v4l2_subdev_call(sd, video, try_fmt, f);
 			if (ret < 0) {
 				/* Shouldn't actually happen... */
 				dev_err(&icd->dev,
diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index d9ccc286659..dd023bdb189 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -152,9 +152,9 @@ static int soc_camera_s_std(struct file *file, void *priv, v4l2_std_id *a)
 {
 	struct soc_camera_file *icf = file->private_data;
 	struct soc_camera_device *icd = icf->icd;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 
-	return v4l2_device_call_until_err(&ici->v4l2_dev, (__u32)icd, core, s_std, *a);
+	return v4l2_subdev_call(sd, core, s_std, *a);
 }
 
 static int soc_camera_reqbufs(struct file *file, void *priv,
@@ -589,7 +589,7 @@ static int soc_camera_streamon(struct file *file, void *priv,
 {
 	struct soc_camera_file *icf = file->private_data;
 	struct soc_camera_device *icd = icf->icd;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	int ret;
 
 	WARN_ON(priv != file->private_data);
@@ -599,7 +599,7 @@ static int soc_camera_streamon(struct file *file, void *priv,
 
 	mutex_lock(&icd->video_lock);
 
-	v4l2_device_call_until_err(&ici->v4l2_dev, (__u32)icd, video, s_stream, 1);
+	v4l2_subdev_call(sd, video, s_stream, 1);
 
 	/* This calls buf_queue from host driver's videobuf_queue_ops */
 	ret = videobuf_streamon(&icf->vb_vidq);
@@ -614,7 +614,7 @@ static int soc_camera_streamoff(struct file *file, void *priv,
 {
 	struct soc_camera_file *icf = file->private_data;
 	struct soc_camera_device *icd = icf->icd;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 
 	WARN_ON(priv != file->private_data);
 
@@ -627,7 +627,7 @@ static int soc_camera_streamoff(struct file *file, void *priv,
 	 * remaining buffers. When the last buffer is freed, stop capture */
 	videobuf_streamoff(&icf->vb_vidq);
 
-	v4l2_device_call_until_err(&ici->v4l2_dev, (__u32)icd, video, s_stream, 0);
+	v4l2_subdev_call(sd, video, s_stream, 0);
 
 	mutex_unlock(&icd->video_lock);
 
@@ -672,6 +672,7 @@ static int soc_camera_g_ctrl(struct file *file, void *priv,
 	struct soc_camera_file *icf = file->private_data;
 	struct soc_camera_device *icd = icf->icd;
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	int ret;
 
 	WARN_ON(priv != file->private_data);
@@ -695,7 +696,7 @@ static int soc_camera_g_ctrl(struct file *file, void *priv,
 			return ret;
 	}
 
-	return v4l2_device_call_until_err(&ici->v4l2_dev, (__u32)icd, core, g_ctrl, ctrl);
+	return v4l2_subdev_call(sd, core, g_ctrl, ctrl);
 }
 
 static int soc_camera_s_ctrl(struct file *file, void *priv,
@@ -704,6 +705,7 @@ static int soc_camera_s_ctrl(struct file *file, void *priv,
 	struct soc_camera_file *icf = file->private_data;
 	struct soc_camera_device *icd = icf->icd;
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	int ret;
 
 	WARN_ON(priv != file->private_data);
@@ -714,7 +716,7 @@ static int soc_camera_s_ctrl(struct file *file, void *priv,
 			return ret;
 	}
 
-	return v4l2_device_call_until_err(&ici->v4l2_dev, (__u32)icd, core, s_ctrl, ctrl);
+	return v4l2_subdev_call(sd, core, s_ctrl, ctrl);
 }
 
 static int soc_camera_cropcap(struct file *file, void *fh,
@@ -812,9 +814,9 @@ static int soc_camera_g_chip_ident(struct file *file, void *fh,
 {
 	struct soc_camera_file *icf = file->private_data;
 	struct soc_camera_device *icd = icf->icd;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 
-	return v4l2_device_call_until_err(&ici->v4l2_dev, (__u32)icd, core, g_chip_ident, id);
+	return v4l2_subdev_call(sd, core, g_chip_ident, id);
 }
 
 #ifdef CONFIG_VIDEO_ADV_DEBUG
@@ -823,9 +825,9 @@ static int soc_camera_g_register(struct file *file, void *fh,
 {
 	struct soc_camera_file *icf = file->private_data;
 	struct soc_camera_device *icd = icf->icd;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 
-	return v4l2_device_call_until_err(&ici->v4l2_dev, (__u32)icd, core, g_register, reg);
+	return v4l2_subdev_call(sd, core, g_register, reg);
 }
 
 static int soc_camera_s_register(struct file *file, void *fh,
@@ -833,9 +835,9 @@ static int soc_camera_s_register(struct file *file, void *fh,
 {
 	struct soc_camera_file *icf = file->private_data;
 	struct soc_camera_device *icd = icf->icd;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 
-	return v4l2_device_call_until_err(&ici->v4l2_dev, (__u32)icd, core, s_register, reg);
+	return v4l2_subdev_call(sd, core, s_register, reg);
 }
 #endif
 
-- 
cgit v1.2.3


From 85f8be68125163085392ed4fc30adcbea641586d Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 25 Aug 2009 11:47:00 -0300
Subject: V4L/DVB (12531): soc-camera: Use I2C device for dev_{dbg,info,...}
 output in all clients

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/mt9m001.c | 20 +++++++++++---------
 drivers/media/video/mt9m111.c | 11 +++++------
 drivers/media/video/mt9t031.c | 16 ++++++++--------
 drivers/media/video/mt9v022.c | 16 ++++++++--------
 drivers/media/video/ov772x.c  |  6 +++---
 drivers/media/video/tw9910.c  |  6 +++---
 6 files changed, 38 insertions(+), 37 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/mt9m001.c b/drivers/media/video/mt9m001.c
index 6e762cd06e3..775e1a3c98d 100644
--- a/drivers/media/video/mt9m001.c
+++ b/drivers/media/video/mt9m001.c
@@ -118,7 +118,7 @@ static int mt9m001_init(struct soc_camera_device *icd)
 	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 	int ret;
 
-	dev_dbg(&icd->dev, "%s\n", __func__);
+	dev_dbg(&client->dev, "%s\n", __func__);
 
 	/*
 	 * We don't know, whether platform provides reset,
@@ -421,7 +421,7 @@ static int mt9m001_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 			unsigned long range = qctrl->default_value - qctrl->minimum;
 			data = ((ctrl->value - qctrl->minimum) * 8 + range / 2) / range;
 
-			dev_dbg(&icd->dev, "Setting gain %d\n", data);
+			dev_dbg(&client->dev, "Setting gain %d\n", data);
 			data = reg_write(client, MT9M001_GLOBAL_GAIN, data);
 			if (data < 0)
 				return -EIO;
@@ -439,7 +439,7 @@ static int mt9m001_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 			else
 				data = ((gain - 64) * 7 + 28) / 56 + 96;
 
-			dev_dbg(&icd->dev, "Setting gain from %d to %d\n",
+			dev_dbg(&client->dev, "Setting gain from %d to %d\n",
 				 reg_read(client, MT9M001_GLOBAL_GAIN), data);
 			data = reg_write(client, MT9M001_GLOBAL_GAIN, data);
 			if (data < 0)
@@ -458,8 +458,10 @@ static int mt9m001_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 			unsigned long shutter = ((ctrl->value - qctrl->minimum) * 1048 +
 						 range / 2) / range + 1;
 
-			dev_dbg(&icd->dev, "Setting shutter width from %d to %lu\n",
-				 reg_read(client, MT9M001_SHUTTER_WIDTH), shutter);
+			dev_dbg(&client->dev,
+				"Setting shutter width from %d to %lu\n",
+				reg_read(client, MT9M001_SHUTTER_WIDTH),
+				shutter);
 			if (reg_write(client, MT9M001_SHUTTER_WIDTH, shutter) < 0)
 				return -EIO;
 			icd->exposure = ctrl->value;
@@ -504,7 +506,7 @@ static int mt9m001_video_probe(struct soc_camera_device *icd,
 
 	/* Enable the chip */
 	data = reg_write(client, MT9M001_CHIP_ENABLE, 1);
-	dev_dbg(&icd->dev, "write: %d\n", data);
+	dev_dbg(&client->dev, "write: %d\n", data);
 
 	/* Read out the chip version register */
 	data = reg_read(client, MT9M001_CHIP_VERSION);
@@ -521,7 +523,7 @@ static int mt9m001_video_probe(struct soc_camera_device *icd,
 		icd->formats = mt9m001_monochrome_formats;
 		break;
 	default:
-		dev_err(&icd->dev,
+		dev_err(&client->dev,
 			"No MT9M001 chip detected, register read %x\n", data);
 		return -ENODEV;
 	}
@@ -546,7 +548,7 @@ static int mt9m001_video_probe(struct soc_camera_device *icd,
 	if (flags & SOCAM_DATAWIDTH_8)
 		icd->num_formats++;
 
-	dev_info(&icd->dev, "Detected a MT9M001 chip ID %x (%s)\n", data,
+	dev_info(&client->dev, "Detected a MT9M001 chip ID %x (%s)\n", data,
 		 data == 0x8431 ? "C12STM" : "C12ST");
 
 	return 0;
@@ -557,7 +559,7 @@ static void mt9m001_video_remove(struct soc_camera_device *icd)
 	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 	struct soc_camera_link *icl = to_soc_camera_link(icd);
 
-	dev_dbg(&icd->dev, "Video %x removed: %p, %p\n", client->addr,
+	dev_dbg(&client->dev, "Video %x removed: %p, %p\n", client->addr,
 		icd->dev.parent, icd->vdev);
 	if (icl->free_bus)
 		icl->free_bus(icl);
diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c
index bef41517018..3637376da75 100644
--- a/drivers/media/video/mt9m111.c
+++ b/drivers/media/video/mt9m111.c
@@ -400,10 +400,9 @@ static int mt9m111_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 	struct v4l2_rect *rect = &a->c;
 	struct i2c_client *client = sd->priv;
 	struct mt9m111 *mt9m111 = to_mt9m111(client);
-	struct soc_camera_device *icd = client->dev.platform_data;
 	int ret;
 
-	dev_dbg(&icd->dev, "%s left=%d, top=%d, width=%d, height=%d\n",
+	dev_dbg(&client->dev, "%s left=%d, top=%d, width=%d, height=%d\n",
 		__func__, rect->left, rect->top, rect->width,
 		rect->height);
 
@@ -818,7 +817,7 @@ static int mt9m111_init(struct soc_camera_device *icd)
 	if (!ret)
 		ret = mt9m111_set_autoexposure(client, mt9m111->autoexposure);
 	if (ret)
-		dev_err(&icd->dev, "mt9m11x init failed: %d\n", ret);
+		dev_err(&client->dev, "mt9m11x init failed: %d\n", ret);
 	return ret;
 }
 
@@ -833,7 +832,7 @@ static int mt9m111_release(struct soc_camera_device *icd)
 		mt9m111->powered = 0;
 
 	if (ret < 0)
-		dev_err(&icd->dev, "mt9m11x release failed: %d\n", ret);
+		dev_err(&client->dev, "mt9m11x release failed: %d\n", ret);
 
 	return ret;
 }
@@ -875,7 +874,7 @@ static int mt9m111_video_probe(struct soc_camera_device *icd,
 		break;
 	default:
 		ret = -ENODEV;
-		dev_err(&icd->dev,
+		dev_err(&client->dev,
 			"No MT9M11x chip detected, register read %x\n", data);
 		goto ei2c;
 	}
@@ -883,7 +882,7 @@ static int mt9m111_video_probe(struct soc_camera_device *icd,
 	icd->formats = mt9m111_colour_formats;
 	icd->num_formats = ARRAY_SIZE(mt9m111_colour_formats);
 
-	dev_info(&icd->dev, "Detected a MT9M11x chip ID %x\n", data);
+	dev_info(&client->dev, "Detected a MT9M11x chip ID %x\n", data);
 
 	mt9m111->autoexposure = 1;
 	mt9m111->autowhitebalance = 1;
diff --git a/drivers/media/video/mt9t031.c b/drivers/media/video/mt9t031.c
index 3fa87be2fc6..cd3eb7731ac 100644
--- a/drivers/media/video/mt9t031.c
+++ b/drivers/media/video/mt9t031.c
@@ -248,7 +248,7 @@ static int mt9t031_set_params(struct soc_camera_device *icd,
 	xbin = min(xskip, (u16)3);
 	ybin = min(yskip, (u16)3);
 
-	dev_dbg(&icd->dev, "xskip %u, width %u/%u, yskip %u, height %u/%u\n",
+	dev_dbg(&client->dev, "xskip %u, width %u/%u, yskip %u, height %u/%u\n",
 		xskip, width, rect->width, yskip, height, rect->height);
 
 	/* Could just do roundup(rect->left, [xy]bin * 2); but this is cheaper */
@@ -287,7 +287,7 @@ static int mt9t031_set_params(struct soc_camera_device *icd,
 			ret = reg_write(client, MT9T031_ROW_ADDRESS_MODE,
 					((ybin - 1) << 4) | (yskip - 1));
 	}
-	dev_dbg(&icd->dev, "new physical left %u, top %u\n", left, top);
+	dev_dbg(&client->dev, "new physical left %u, top %u\n", left, top);
 
 	/* The caller provides a supported format, as guaranteed by
 	 * icd->try_fmt_cap(), soc_camera_s_crop() and soc_camera_cropcap() */
@@ -567,7 +567,7 @@ static int mt9t031_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 			unsigned long range = qctrl->default_value - qctrl->minimum;
 			data = ((ctrl->value - qctrl->minimum) * 8 + range / 2) / range;
 
-			dev_dbg(&icd->dev, "Setting gain %d\n", data);
+			dev_dbg(&client->dev, "Setting gain %d\n", data);
 			data = reg_write(client, MT9T031_GLOBAL_GAIN, data);
 			if (data < 0)
 				return -EIO;
@@ -587,7 +587,7 @@ static int mt9t031_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 				/* calculated gain 65..1024 -> (1..120) << 8 + 0x60 */
 				data = (((gain - 64 + 7) * 32) & 0xff00) | 0x60;
 
-			dev_dbg(&icd->dev, "Setting gain from 0x%x to 0x%x\n",
+			dev_dbg(&client->dev, "Set gain from 0x%x to 0x%x\n",
 				reg_read(client, MT9T031_GLOBAL_GAIN), data);
 			data = reg_write(client, MT9T031_GLOBAL_GAIN, data);
 			if (data < 0)
@@ -608,7 +608,7 @@ static int mt9t031_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 			u32 old;
 
 			get_shutter(client, &old);
-			dev_dbg(&icd->dev, "Setting shutter width from %u to %u\n",
+			dev_dbg(&client->dev, "Set shutter from %u to %u\n",
 				old, shutter);
 			if (set_shutter(client, shutter) < 0)
 				return -EIO;
@@ -653,7 +653,7 @@ static int mt9t031_video_probe(struct i2c_client *client)
 
 	/* Enable the chip */
 	data = reg_write(client, MT9T031_CHIP_ENABLE, 1);
-	dev_dbg(&icd->dev, "write: %d\n", data);
+	dev_dbg(&client->dev, "write: %d\n", data);
 
 	/* Read out the chip version register */
 	data = reg_read(client, MT9T031_CHIP_VERSION);
@@ -665,12 +665,12 @@ static int mt9t031_video_probe(struct i2c_client *client)
 		icd->num_formats = ARRAY_SIZE(mt9t031_colour_formats);
 		break;
 	default:
-		dev_err(&icd->dev,
+		dev_err(&client->dev,
 			"No MT9T031 chip detected, register read %x\n", data);
 		return -ENODEV;
 	}
 
-	dev_info(&icd->dev, "Detected a MT9T031 chip ID %x\n", data);
+	dev_info(&client->dev, "Detected a MT9T031 chip ID %x\n", data);
 
 	return 0;
 }
diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c
index e609ff51aa6..ab196542528 100644
--- a/drivers/media/video/mt9v022.c
+++ b/drivers/media/video/mt9v022.c
@@ -224,7 +224,7 @@ static int mt9v022_set_bus_param(struct soc_camera_device *icd,
 	if (ret < 0)
 		return ret;
 
-	dev_dbg(&icd->dev, "Calculated pixclk 0x%x, chip control 0x%x\n",
+	dev_dbg(&client->dev, "Calculated pixclk 0x%x, chip control 0x%x\n",
 		pixclk, mt9v022->chip_control);
 
 	return 0;
@@ -287,7 +287,7 @@ static int mt9v022_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 	if (ret < 0)
 		return ret;
 
-	dev_dbg(&icd->dev, "Frame %ux%u pixel\n", rect->width, rect->height);
+	dev_dbg(&client->dev, "Frame %ux%u pixel\n", rect->width, rect->height);
 
 	return 0;
 }
@@ -545,7 +545,7 @@ static int mt9v022_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 			if (reg_clear(client, MT9V022_AEC_AGC_ENABLE, 0x2) < 0)
 				return -EIO;
 
-			dev_info(&icd->dev, "Setting gain from %d to %lu\n",
+			dev_info(&client->dev, "Setting gain from %d to %lu\n",
 				 reg_read(client, MT9V022_ANALOG_GAIN), gain);
 			if (reg_write(client, MT9V022_ANALOG_GAIN, gain) < 0)
 				return -EIO;
@@ -566,7 +566,7 @@ static int mt9v022_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 			if (reg_clear(client, MT9V022_AEC_AGC_ENABLE, 0x1) < 0)
 				return -EIO;
 
-			dev_dbg(&icd->dev, "Shutter width from %d to %lu\n",
+			dev_dbg(&client->dev, "Shutter width from %d to %lu\n",
 				reg_read(client, MT9V022_TOTAL_SHUTTER_WIDTH),
 				shutter);
 			if (reg_write(client, MT9V022_TOTAL_SHUTTER_WIDTH,
@@ -616,7 +616,7 @@ static int mt9v022_video_probe(struct soc_camera_device *icd,
 	/* must be 0x1311 or 0x1313 */
 	if (data != 0x1311 && data != 0x1313) {
 		ret = -ENODEV;
-		dev_info(&icd->dev, "No MT9V022 detected, ID register 0x%x\n",
+		dev_info(&client->dev, "No MT9V022 found, ID register 0x%x\n",
 			 data);
 		goto ei2c;
 	}
@@ -628,7 +628,7 @@ static int mt9v022_video_probe(struct soc_camera_device *icd,
 	/* 15 clock cycles */
 	udelay(200);
 	if (reg_read(client, MT9V022_RESET)) {
-		dev_err(&icd->dev, "Resetting MT9V022 failed!\n");
+		dev_err(&client->dev, "Resetting MT9V022 failed!\n");
 		if (ret > 0)
 			ret = -EIO;
 		goto ei2c;
@@ -669,7 +669,7 @@ static int mt9v022_video_probe(struct soc_camera_device *icd,
 	if (flags & SOCAM_DATAWIDTH_8)
 		icd->num_formats++;
 
-	dev_info(&icd->dev, "Detected a MT9V022 chip ID %x, %s sensor\n",
+	dev_info(&client->dev, "Detected a MT9V022 chip ID %x, %s sensor\n",
 		 data, mt9v022->model == V4L2_IDENT_MT9V022IX7ATM ?
 		 "monochrome" : "colour");
 
@@ -682,7 +682,7 @@ static void mt9v022_video_remove(struct soc_camera_device *icd)
 	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 	struct soc_camera_link *icl = to_soc_camera_link(icd);
 
-	dev_dbg(&icd->dev, "Video %x removed: %p, %p\n", client->addr,
+	dev_dbg(&client->dev, "Video %x removed: %p, %p\n", client->addr,
 		icd->dev.parent, icd->vdev);
 	if (icl->free_bus)
 		icl->free_bus(icl);
diff --git a/drivers/media/video/ov772x.c b/drivers/media/video/ov772x.c
index bbe6f2d71c1..bbf5331a2ea 100644
--- a/drivers/media/video/ov772x.c
+++ b/drivers/media/video/ov772x.c
@@ -1002,7 +1002,7 @@ static int ov772x_video_probe(struct soc_camera_device *icd,
 	 */
 	if (SOCAM_DATAWIDTH_10 != priv->info->buswidth &&
 	    SOCAM_DATAWIDTH_8  != priv->info->buswidth) {
-		dev_err(&icd->dev, "bus width error\n");
+		dev_err(&client->dev, "bus width error\n");
 		return -ENODEV;
 	}
 
@@ -1025,12 +1025,12 @@ static int ov772x_video_probe(struct soc_camera_device *icd,
 		priv->model = V4L2_IDENT_OV7725;
 		break;
 	default:
-		dev_err(&icd->dev,
+		dev_err(&client->dev,
 			"Product ID error %x:%x\n", pid, ver);
 		return -ENODEV;
 	}
 
-	dev_info(&icd->dev,
+	dev_info(&client->dev,
 		 "%s Product ID %0x:%0x Manufacturer ID %x:%x\n",
 		 devname,
 		 pid,
diff --git a/drivers/media/video/tw9910.c b/drivers/media/video/tw9910.c
index b6b15468b40..94bd5b09f05 100644
--- a/drivers/media/video/tw9910.c
+++ b/drivers/media/video/tw9910.c
@@ -793,7 +793,7 @@ static int tw9910_video_probe(struct soc_camera_device *icd,
 	 */
 	if (SOCAM_DATAWIDTH_16 != priv->info->buswidth &&
 	    SOCAM_DATAWIDTH_8  != priv->info->buswidth) {
-		dev_err(&icd->dev, "bus width error\n");
+		dev_err(&client->dev, "bus width error\n");
 		return -ENODEV;
 	}
 
@@ -807,12 +807,12 @@ static int tw9910_video_probe(struct soc_camera_device *icd,
 
 	if (0x0B != GET_ID(val) ||
 	    0x00 != GET_ReV(val)) {
-		dev_err(&icd->dev,
+		dev_err(&client->dev,
 			"Product ID error %x:%x\n", GET_ID(val), GET_ReV(val));
 		return -ENODEV;
 	}
 
-	dev_info(&icd->dev,
+	dev_info(&client->dev,
 		 "tw9910 Product ID %0x:%0x\n", GET_ID(val), GET_ReV(val));
 
 	icd->vdev->tvnorms      = V4L2_STD_NTSC | V4L2_STD_PAL;
-- 
cgit v1.2.3


From 2aa58db47f5c70635ea278f6a5ff9e1e920bfe6a Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 25 Aug 2009 11:47:00 -0300
Subject: V4L/DVB (12532): soc-camera: Use camera device object for core output

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/soc_camera.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index dd023bdb189..c6cccdf8daf 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -297,7 +297,7 @@ static int soc_camera_set_fmt(struct soc_camera_file *icf,
 		return ret;
 	} else if (!icd->current_fmt ||
 		   icd->current_fmt->fourcc != pix->pixelformat) {
-		dev_err(ici->v4l2_dev.dev,
+		dev_err(&icd->dev,
 			"Host driver hasn't set up current format correctly!\n");
 		return -EINVAL;
 	}
@@ -426,7 +426,6 @@ static int soc_camera_close(struct file *file)
 	struct soc_camera_file *icf = file->private_data;
 	struct soc_camera_device *icd = icf->icd;
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
-	struct video_device *vdev = icd->vdev;
 
 	mutex_lock(&icd->video_lock);
 	icd->use_count--;
@@ -446,7 +445,7 @@ static int soc_camera_close(struct file *file)
 
 	vfree(icf);
 
-	dev_dbg(vdev->parent, "camera device close\n");
+	dev_dbg(&icd->dev, "camera device close\n");
 
 	return 0;
 }
@@ -456,10 +455,9 @@ static ssize_t soc_camera_read(struct file *file, char __user *buf,
 {
 	struct soc_camera_file *icf = file->private_data;
 	struct soc_camera_device *icd = icf->icd;
-	struct video_device *vdev = icd->vdev;
 	int err = -EINVAL;
 
-	dev_err(vdev->parent, "camera device read not implemented\n");
+	dev_err(&icd->dev, "camera device read not implemented\n");
 
 	return err;
 }
-- 
cgit v1.2.3


From 0166b74374cae3fa8bff0caef726a3d960a9a50a Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 25 Aug 2009 11:47:00 -0300
Subject: V4L/DVB (12533): soc-camera: Use video device object for output in
 host drivers

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/mx1_camera.c           | 38 ++++++++++---------
 drivers/media/video/mx3_camera.c           | 46 ++++++++++++----------
 drivers/media/video/pxa_camera.c           | 54 ++++++++++++++------------
 drivers/media/video/sh_mobile_ceu_camera.c | 61 ++++++++++++++++--------------
 4 files changed, 110 insertions(+), 89 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c
index ed7856bdad4..1f1324a1d49 100644
--- a/drivers/media/video/mx1_camera.c
+++ b/drivers/media/video/mx1_camera.c
@@ -135,7 +135,7 @@ static int mx1_videobuf_setup(struct videobuf_queue *vq, unsigned int *count,
 	while (*size * *count > MAX_VIDEO_MEM * 1024 * 1024)
 		(*count)--;
 
-	dev_dbg(&icd->dev, "count=%d, size=%d\n", *count, *size);
+	dev_dbg(icd->dev.parent, "count=%d, size=%d\n", *count, *size);
 
 	return 0;
 }
@@ -147,7 +147,7 @@ static void free_buffer(struct videobuf_queue *vq, struct mx1_buffer *buf)
 
 	BUG_ON(in_interrupt());
 
-	dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+	dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
 		vb, vb->baddr, vb->bsize);
 
 	/* This waits until this buffer is out of danger, i.e., until it is no
@@ -165,7 +165,7 @@ static int mx1_videobuf_prepare(struct videobuf_queue *vq,
 	struct mx1_buffer *buf = container_of(vb, struct mx1_buffer, vb);
 	int ret;
 
-	dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+	dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
 		vb, vb->baddr, vb->bsize);
 
 	/* Added list head initialization on alloc */
@@ -216,10 +216,11 @@ out:
 static int mx1_camera_setup_dma(struct mx1_camera_dev *pcdev)
 {
 	struct videobuf_buffer *vbuf = &pcdev->active->vb;
+	struct device *dev = pcdev->icd->dev.parent;
 	int ret;
 
 	if (unlikely(!pcdev->active)) {
-		dev_err(pcdev->icd->dev.parent, "DMA End IRQ with no active buffer\n");
+		dev_err(dev, "DMA End IRQ with no active buffer\n");
 		return -EFAULT;
 	}
 
@@ -229,7 +230,7 @@ static int mx1_camera_setup_dma(struct mx1_camera_dev *pcdev)
 		vbuf->size, pcdev->res->start +
 		CSIRXR, DMA_MODE_READ);
 	if (unlikely(ret))
-		dev_err(pcdev->icd->dev.parent, "Failed to setup DMA sg list\n");
+		dev_err(dev, "Failed to setup DMA sg list\n");
 
 	return ret;
 }
@@ -243,7 +244,7 @@ static void mx1_videobuf_queue(struct videobuf_queue *vq,
 	struct mx1_camera_dev *pcdev = ici->priv;
 	struct mx1_buffer *buf = container_of(vb, struct mx1_buffer, vb);
 
-	dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+	dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
 		vb, vb->baddr, vb->bsize);
 
 	list_add_tail(&vb->queue, &pcdev->capture);
@@ -270,22 +271,23 @@ static void mx1_videobuf_release(struct videobuf_queue *vq,
 	struct mx1_buffer *buf = container_of(vb, struct mx1_buffer, vb);
 #ifdef DEBUG
 	struct soc_camera_device *icd = vq->priv_data;
+	struct device *dev = icd->dev.parent;
 
-	dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+	dev_dbg(dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
 		vb, vb->baddr, vb->bsize);
 
 	switch (vb->state) {
 	case VIDEOBUF_ACTIVE:
-		dev_dbg(&icd->dev, "%s (active)\n", __func__);
+		dev_dbg(dev, "%s (active)\n", __func__);
 		break;
 	case VIDEOBUF_QUEUED:
-		dev_dbg(&icd->dev, "%s (queued)\n", __func__);
+		dev_dbg(dev, "%s (queued)\n", __func__);
 		break;
 	case VIDEOBUF_PREPARED:
-		dev_dbg(&icd->dev, "%s (prepared)\n", __func__);
+		dev_dbg(dev, "%s (prepared)\n", __func__);
 		break;
 	default:
-		dev_dbg(&icd->dev, "%s (unknown)\n", __func__);
+		dev_dbg(dev, "%s (unknown)\n", __func__);
 		break;
 	}
 #endif
@@ -325,6 +327,7 @@ static void mx1_camera_wakeup(struct mx1_camera_dev *pcdev,
 static void mx1_camera_dma_irq(int channel, void *data)
 {
 	struct mx1_camera_dev *pcdev = data;
+	struct device *dev = pcdev->icd->dev.parent;
 	struct mx1_buffer *buf;
 	struct videobuf_buffer *vb;
 	unsigned long flags;
@@ -334,14 +337,14 @@ static void mx1_camera_dma_irq(int channel, void *data)
 	imx_dma_disable(channel);
 
 	if (unlikely(!pcdev->active)) {
-		dev_err(pcdev->icd->dev.parent, "DMA End IRQ with no active buffer\n");
+		dev_err(dev, "DMA End IRQ with no active buffer\n");
 		goto out;
 	}
 
 	vb = &pcdev->active->vb;
 	buf = container_of(vb, struct mx1_buffer, vb);
 	WARN_ON(buf->inwork || list_empty(&vb->queue));
-	dev_dbg(pcdev->icd->dev.parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+	dev_dbg(dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
 		vb, vb->baddr, vb->bsize);
 
 	mx1_camera_wakeup(pcdev, vb, buf);
@@ -381,8 +384,9 @@ static int mclk_get_divisor(struct mx1_camera_dev *pcdev)
 	 * they get a nice Oops */
 	div = (lcdclk + 2 * mclk - 1) / (2 * mclk) - 1;
 
-	dev_dbg(pcdev->icd->dev.parent, "System clock %lukHz, target freq %dkHz, "
-		"divisor %lu\n", lcdclk / 1000, mclk / 1000, div);
+	dev_dbg(pcdev->icd->dev.parent,
+		"System clock %lukHz, target freq %dkHz, divisor %lu\n",
+		lcdclk / 1000, mclk / 1000, div);
 
 	return div;
 }
@@ -428,7 +432,7 @@ static int mx1_camera_add_device(struct soc_camera_device *icd)
 		goto ebusy;
 	}
 
-	dev_info(&icd->dev, "MX1 Camera driver attached to camera %d\n",
+	dev_info(icd->dev.parent, "MX1 Camera driver attached to camera %d\n",
 		 icd->devnum);
 
 	mx1_camera_activate(pcdev);
@@ -454,7 +458,7 @@ static void mx1_camera_remove_device(struct soc_camera_device *icd)
 	/* Stop DMA engine */
 	imx_dma_disable(pcdev->dma_chan);
 
-	dev_info(&icd->dev, "MX1 Camera driver detached from camera %d\n",
+	dev_info(icd->dev.parent, "MX1 Camera driver detached from camera %d\n",
 		 icd->devnum);
 
 	mx1_camera_deactivate(pcdev);
diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c
index f7888f30da5..d5b51e9900b 100644
--- a/drivers/media/video/mx3_camera.c
+++ b/drivers/media/video/mx3_camera.c
@@ -178,7 +178,7 @@ static void free_buffer(struct videobuf_queue *vq, struct mx3_camera_buffer *buf
 
 	BUG_ON(in_interrupt());
 
-	dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+	dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
 		vb, vb->baddr, vb->bsize);
 
 	/*
@@ -375,7 +375,8 @@ static void mx3_videobuf_queue(struct videobuf_queue *vq,
 	spin_unlock_irq(&mx3_cam->lock);
 
 	cookie = txd->tx_submit(txd);
-	dev_dbg(&icd->dev, "Submitted cookie %d DMA 0x%08x\n", cookie, sg_dma_address(&buf->sg));
+	dev_dbg(icd->dev.parent, "Submitted cookie %d DMA 0x%08x\n",
+		cookie, sg_dma_address(&buf->sg));
 
 	spin_lock_irq(&mx3_cam->lock);
 
@@ -402,9 +403,10 @@ static void mx3_videobuf_release(struct videobuf_queue *vq,
 		container_of(vb, struct mx3_camera_buffer, vb);
 	unsigned long flags;
 
-	dev_dbg(&icd->dev, "Release%s DMA 0x%08x (state %d), queue %sempty\n",
+	dev_dbg(icd->dev.parent,
+		"Release%s DMA 0x%08x (state %d), queue %sempty\n",
 		mx3_cam->active == buf ? " active" : "", sg_dma_address(&buf->sg),
-		 vb->state, list_empty(&vb->queue) ? "" : "not ");
+		vb->state, list_empty(&vb->queue) ? "" : "not ");
 	spin_lock_irqsave(&mx3_cam->lock, flags);
 	if ((vb->state == VIDEOBUF_ACTIVE || vb->state == VIDEOBUF_QUEUED) &&
 	    !list_empty(&vb->queue)) {
@@ -484,7 +486,7 @@ static void mx3_camera_activate(struct mx3_camera_dev *mx3_cam,
 
 	clk_enable(mx3_cam->clk);
 	rate = clk_round_rate(mx3_cam->clk, mx3_cam->mclk);
-	dev_dbg(&icd->dev, "Set SENS_CONF to %x, rate %ld\n", conf, rate);
+	dev_dbg(icd->dev.parent, "Set SENS_CONF to %x, rate %ld\n", conf, rate);
 	if (rate)
 		clk_set_rate(mx3_cam->clk, rate);
 }
@@ -502,7 +504,7 @@ static int mx3_camera_add_device(struct soc_camera_device *icd)
 
 	mx3_cam->icd = icd;
 
-	dev_info(&icd->dev, "MX3 Camera driver attached to camera %d\n",
+	dev_info(icd->dev.parent, "MX3 Camera driver attached to camera %d\n",
 		 icd->devnum);
 
 	return 0;
@@ -526,7 +528,7 @@ static void mx3_camera_remove_device(struct soc_camera_device *icd)
 
 	mx3_cam->icd = NULL;
 
-	dev_info(&icd->dev, "MX3 Camera driver detached from camera %d\n",
+	dev_info(icd->dev.parent, "MX3 Camera driver detached from camera %d\n",
 		 icd->devnum);
 }
 
@@ -603,7 +605,8 @@ static int mx3_camera_try_bus_param(struct soc_camera_device *icd,
 	unsigned long bus_flags, camera_flags;
 	int ret = test_platform_param(mx3_cam, depth, &bus_flags);
 
-	dev_dbg(icd->dev.parent, "requested bus width %d bit: %d\n", depth, ret);
+	dev_dbg(icd->dev.parent, "requested bus width %d bit: %d\n",
+		depth, ret);
 
 	if (ret < 0)
 		return ret;
@@ -612,7 +615,8 @@ static int mx3_camera_try_bus_param(struct soc_camera_device *icd,
 
 	ret = soc_camera_bus_param_compatible(camera_flags, bus_flags);
 	if (ret < 0)
-		dev_warn(&icd->dev, "Flags incompatible: camera %lx, host %lx\n",
+		dev_warn(icd->dev.parent,
+			 "Flags incompatible: camera %lx, host %lx\n",
 			 camera_flags, bus_flags);
 
 	return ret;
@@ -686,7 +690,8 @@ static int mx3_camera_get_formats(struct soc_camera_device *icd, int idx,
 			xlate->cam_fmt = icd->formats + idx;
 			xlate->buswidth = buswidth;
 			xlate++;
-			dev_dbg(icd->dev.parent, "Providing format %s using %s\n",
+			dev_dbg(icd->dev.parent,
+				"Providing format %s using %s\n",
 				mx3_camera_formats[0].name,
 				icd->formats[idx].name);
 		}
@@ -698,7 +703,8 @@ static int mx3_camera_get_formats(struct soc_camera_device *icd, int idx,
 			xlate->cam_fmt = icd->formats + idx;
 			xlate->buswidth = buswidth;
 			xlate++;
-			dev_dbg(icd->dev.parent, "Providing format %s using %s\n",
+			dev_dbg(icd->dev.parent,
+				"Providing format %s using %s\n",
 				mx3_camera_formats[0].name,
 				icd->formats[idx].name);
 		}
@@ -821,7 +827,8 @@ static int mx3_camera_set_fmt(struct soc_camera_device *icd,
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
 	if (!xlate) {
-		dev_warn(icd->dev.parent, "Format %x not found\n", pix->pixelformat);
+		dev_warn(icd->dev.parent, "Format %x not found\n",
+			 pix->pixelformat);
 		return -EINVAL;
 	}
 
@@ -883,7 +890,7 @@ static int mx3_camera_try_fmt(struct soc_camera_device *icd,
 	if (field == V4L2_FIELD_ANY) {
 		pix->field = V4L2_FIELD_NONE;
 	} else if (field != V4L2_FIELD_NONE) {
-		dev_err(&icd->dev, "Field type %d unsupported.\n", field);
+		dev_err(icd->dev.parent, "Field type %d unsupported.\n", field);
 		return -EINVAL;
 	}
 
@@ -922,14 +929,15 @@ static int mx3_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
 	u32 dw, sens_conf;
 	int ret = test_platform_param(mx3_cam, icd->buswidth, &bus_flags);
 	const struct soc_camera_format_xlate *xlate;
+	struct device *dev = icd->dev.parent;
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
 	if (!xlate) {
-		dev_warn(icd->dev.parent, "Format %x not found\n", pixfmt);
+		dev_warn(dev, "Format %x not found\n", pixfmt);
 		return -EINVAL;
 	}
 
-	dev_dbg(icd->dev.parent, "requested bus width %d bit: %d\n",
+	dev_dbg(dev, "requested bus width %d bit: %d\n",
 		icd->buswidth, ret);
 
 	if (ret < 0)
@@ -938,10 +946,10 @@ static int mx3_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
 	camera_flags = icd->ops->query_bus_param(icd);
 
 	common_flags = soc_camera_bus_param_compatible(camera_flags, bus_flags);
-	dev_dbg(icd->dev.parent, "Flags cam: 0x%lx host: 0x%lx common: 0x%lx\n",
+	dev_dbg(dev, "Flags cam: 0x%lx host: 0x%lx common: 0x%lx\n",
 		camera_flags, bus_flags, common_flags);
 	if (!common_flags) {
-		dev_dbg(icd->dev.parent, "no common flags");
+		dev_dbg(dev, "no common flags");
 		return -EINVAL;
 	}
 
@@ -995,7 +1003,7 @@ static int mx3_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
 
 	ret = icd->ops->set_bus_param(icd, common_flags);
 	if (ret < 0) {
-		dev_dbg(icd->dev.parent, "camera set_bus_param(%lx) returned %d\n",
+		dev_dbg(dev, "camera set_bus_param(%lx) returned %d\n",
 			common_flags, ret);
 		return ret;
 	}
@@ -1050,7 +1058,7 @@ static int mx3_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
 
 	csi_reg_write(mx3_cam, sens_conf | dw, CSI_SENS_CONF);
 
-	dev_dbg(icd->dev.parent, "Set SENS_CONF to %x\n", sens_conf | dw);
+	dev_dbg(dev, "Set SENS_CONF to %x\n", sens_conf | dw);
 
 	return 0;
 }
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
index 4bc2a4f81f7..1fd6ef392a5 100644
--- a/drivers/media/video/pxa_camera.c
+++ b/drivers/media/video/pxa_camera.c
@@ -237,7 +237,7 @@ static int pxa_videobuf_setup(struct videobuf_queue *vq, unsigned int *count,
 {
 	struct soc_camera_device *icd = vq->priv_data;
 
-	dev_dbg(&icd->dev, "count=%d, size=%d\n", *count, *size);
+	dev_dbg(icd->dev.parent, "count=%d, size=%d\n", *count, *size);
 
 	*size = roundup(icd->rect_current.width * icd->rect_current.height *
 			((icd->current_fmt->depth + 7) >> 3), 8);
@@ -259,7 +259,7 @@ static void free_buffer(struct videobuf_queue *vq, struct pxa_buffer *buf)
 
 	BUG_ON(in_interrupt());
 
-	dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+	dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
 		&buf->vb, buf->vb.baddr, buf->vb.bsize);
 
 	/* This waits until this buffer is out of danger, i.e., until it is no
@@ -540,7 +540,8 @@ static void pxa_dma_start_channels(struct pxa_camera_dev *pcdev)
 	active = pcdev->active;
 
 	for (i = 0; i < pcdev->channels; i++) {
-		dev_dbg(pcdev->soc_host.v4l2_dev.dev, "%s (channel=%d) ddadr=%08x\n", __func__,
+		dev_dbg(pcdev->soc_host.v4l2_dev.dev,
+			"%s (channel=%d) ddadr=%08x\n", __func__,
 			i, active->dmas[i].sg_dma);
 		DDADR(pcdev->dma_chans[i]) = active->dmas[i].sg_dma;
 		DCSR(pcdev->dma_chans[i]) = DCSR_RUN;
@@ -552,7 +553,8 @@ static void pxa_dma_stop_channels(struct pxa_camera_dev *pcdev)
 	int i;
 
 	for (i = 0; i < pcdev->channels; i++) {
-		dev_dbg(pcdev->soc_host.v4l2_dev.dev, "%s (channel=%d)\n", __func__, i);
+		dev_dbg(pcdev->soc_host.v4l2_dev.dev,
+			"%s (channel=%d)\n", __func__, i);
 		DCSR(pcdev->dma_chans[i]) = 0;
 	}
 }
@@ -620,8 +622,8 @@ static void pxa_videobuf_queue(struct videobuf_queue *vq,
 	struct pxa_camera_dev *pcdev = ici->priv;
 	struct pxa_buffer *buf = container_of(vb, struct pxa_buffer, vb);
 
-	dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d active=%p\n", __func__,
-		vb, vb->baddr, vb->bsize, pcdev->active);
+	dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%08lx %d active=%p\n",
+		__func__, vb, vb->baddr, vb->bsize, pcdev->active);
 
 	list_add_tail(&vb->queue, &pcdev->capture);
 
@@ -638,22 +640,23 @@ static void pxa_videobuf_release(struct videobuf_queue *vq,
 	struct pxa_buffer *buf = container_of(vb, struct pxa_buffer, vb);
 #ifdef DEBUG
 	struct soc_camera_device *icd = vq->priv_data;
+	struct device *dev = icd->dev.parent;
 
-	dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+	dev_dbg(dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
 		vb, vb->baddr, vb->bsize);
 
 	switch (vb->state) {
 	case VIDEOBUF_ACTIVE:
-		dev_dbg(&icd->dev, "%s (active)\n", __func__);
+		dev_dbg(dev, "%s (active)\n", __func__);
 		break;
 	case VIDEOBUF_QUEUED:
-		dev_dbg(&icd->dev, "%s (queued)\n", __func__);
+		dev_dbg(dev, "%s (queued)\n", __func__);
 		break;
 	case VIDEOBUF_PREPARED:
-		dev_dbg(&icd->dev, "%s (prepared)\n", __func__);
+		dev_dbg(dev, "%s (prepared)\n", __func__);
 		break;
 	default:
-		dev_dbg(&icd->dev, "%s (unknown)\n", __func__);
+		dev_dbg(dev, "%s (unknown)\n", __func__);
 		break;
 	}
 #endif
@@ -924,7 +927,8 @@ static irqreturn_t pxa_camera_irq(int irq, void *data)
 	struct videobuf_buffer *vb;
 
 	status = __raw_readl(pcdev->base + CISR);
-	dev_dbg(pcdev->soc_host.v4l2_dev.dev, "Camera interrupt status 0x%lx\n", status);
+	dev_dbg(pcdev->soc_host.v4l2_dev.dev,
+		"Camera interrupt status 0x%lx\n", status);
 
 	if (!status)
 		return IRQ_NONE;
@@ -964,7 +968,7 @@ static int pxa_camera_add_device(struct soc_camera_device *icd)
 
 	pcdev->icd = icd;
 
-	dev_info(&icd->dev, "PXA Camera driver attached to camera %d\n",
+	dev_info(icd->dev.parent, "PXA Camera driver attached to camera %d\n",
 		 icd->devnum);
 
 	return 0;
@@ -978,7 +982,7 @@ static void pxa_camera_remove_device(struct soc_camera_device *icd)
 
 	BUG_ON(icd != pcdev->icd);
 
-	dev_info(&icd->dev, "PXA Camera driver detached from camera %d\n",
+	dev_info(icd->dev.parent, "PXA Camera driver detached from camera %d\n",
 		 icd->devnum);
 
 	/* disable capture, disable interrupts */
@@ -1224,7 +1228,7 @@ static int required_buswidth(const struct soc_camera_data_format *fmt)
 static int pxa_camera_get_formats(struct soc_camera_device *icd, int idx,
 				  struct soc_camera_format_xlate *xlate)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct device *dev = icd->dev.parent;
 	int formats = 0, buswidth, ret;
 
 	buswidth = required_buswidth(icd->formats + idx);
@@ -1244,7 +1248,7 @@ static int pxa_camera_get_formats(struct soc_camera_device *icd, int idx,
 			xlate->cam_fmt = icd->formats + idx;
 			xlate->buswidth = buswidth;
 			xlate++;
-			dev_dbg(ici->v4l2_dev.dev, "Providing format %s using %s\n",
+			dev_dbg(dev, "Providing format %s using %s\n",
 				pxa_camera_formats[0].name,
 				icd->formats[idx].name);
 		}
@@ -1259,7 +1263,7 @@ static int pxa_camera_get_formats(struct soc_camera_device *icd, int idx,
 			xlate->cam_fmt = icd->formats + idx;
 			xlate->buswidth = buswidth;
 			xlate++;
-			dev_dbg(ici->v4l2_dev.dev, "Providing format %s packed\n",
+			dev_dbg(dev, "Providing format %s packed\n",
 				icd->formats[idx].name);
 		}
 		break;
@@ -1271,7 +1275,7 @@ static int pxa_camera_get_formats(struct soc_camera_device *icd, int idx,
 			xlate->cam_fmt = icd->formats + idx;
 			xlate->buswidth = icd->formats[idx].depth;
 			xlate++;
-			dev_dbg(ici->v4l2_dev.dev,
+			dev_dbg(dev,
 				"Providing format %s in pass-through mode\n",
 				icd->formats[idx].name);
 		}
@@ -1286,6 +1290,7 @@ static int pxa_camera_set_crop(struct soc_camera_device *icd,
 	struct v4l2_rect *rect = &a->c;
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	struct pxa_camera_dev *pcdev = ici->priv;
+	struct device *dev = icd->dev.parent;
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	struct soc_camera_sense sense = {
 		.master_clock = pcdev->mclk,
@@ -1302,11 +1307,11 @@ static int pxa_camera_set_crop(struct soc_camera_device *icd,
 	icd->sense = NULL;
 
 	if (ret < 0) {
-		dev_warn(ici->v4l2_dev.dev, "Failed to crop to %ux%u@%u:%u\n",
+		dev_warn(dev, "Failed to crop to %ux%u@%u:%u\n",
 			 rect->width, rect->height, rect->left, rect->top);
 	} else if (sense.flags & SOCAM_SENSE_PCLK_CHANGED) {
 		if (sense.pixel_clock > sense.pixel_clock_max) {
-			dev_err(ici->v4l2_dev.dev,
+			dev_err(dev,
 				"pixel clock %lu set by the camera too high!",
 				sense.pixel_clock);
 			return -EIO;
@@ -1322,6 +1327,7 @@ static int pxa_camera_set_fmt(struct soc_camera_device *icd,
 {
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	struct pxa_camera_dev *pcdev = ici->priv;
+	struct device *dev = icd->dev.parent;
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	const struct soc_camera_data_format *cam_fmt = NULL;
 	const struct soc_camera_format_xlate *xlate = NULL;
@@ -1335,7 +1341,7 @@ static int pxa_camera_set_fmt(struct soc_camera_device *icd,
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
 	if (!xlate) {
-		dev_warn(ici->v4l2_dev.dev, "Format %x not found\n", pix->pixelformat);
+		dev_warn(dev, "Format %x not found\n", pix->pixelformat);
 		return -EINVAL;
 	}
 
@@ -1351,11 +1357,11 @@ static int pxa_camera_set_fmt(struct soc_camera_device *icd,
 	icd->sense = NULL;
 
 	if (ret < 0) {
-		dev_warn(ici->v4l2_dev.dev, "Failed to configure for format %x\n",
+		dev_warn(dev, "Failed to configure for format %x\n",
 			 pix->pixelformat);
 	} else if (sense.flags & SOCAM_SENSE_PCLK_CHANGED) {
 		if (sense.pixel_clock > sense.pixel_clock_max) {
-			dev_err(ici->v4l2_dev.dev,
+			dev_err(dev,
 				"pixel clock %lu set by the camera too high!",
 				sense.pixel_clock);
 			return -EIO;
@@ -1413,7 +1419,7 @@ static int pxa_camera_try_fmt(struct soc_camera_device *icd,
 	if (field == V4L2_FIELD_ANY) {
 		pix->field = V4L2_FIELD_NONE;
 	} else if (field != V4L2_FIELD_NONE) {
-		dev_err(&icd->dev, "Field type %d unsupported.\n", field);
+		dev_err(icd->dev.parent, "Field type %d unsupported.\n", field);
 		return -EINVAL;
 	}
 
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index 28c3affe882..3457bababd3 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -167,7 +167,7 @@ static int sh_mobile_ceu_videobuf_setup(struct videobuf_queue *vq,
 			(*count)--;
 	}
 
-	dev_dbg(&icd->dev, "count=%d, size=%d\n", *count, *size);
+	dev_dbg(icd->dev.parent, "count=%d, size=%d\n", *count, *size);
 
 	return 0;
 }
@@ -177,7 +177,7 @@ static void free_buffer(struct videobuf_queue *vq,
 {
 	struct soc_camera_device *icd = vq->priv_data;
 
-	dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %zd\n", __func__,
+	dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%08lx %zd\n", __func__,
 		&buf->vb, buf->vb.baddr, buf->vb.bsize);
 
 	if (in_interrupt())
@@ -185,7 +185,7 @@ static void free_buffer(struct videobuf_queue *vq,
 
 	videobuf_waiton(&buf->vb, 0, 0);
 	videobuf_dma_contig_free(vq, &buf->vb);
-	dev_dbg(&icd->dev, "%s freed\n", __func__);
+	dev_dbg(icd->dev.parent, "%s freed\n", __func__);
 	buf->vb.state = VIDEOBUF_NEEDS_INIT;
 }
 
@@ -249,7 +249,7 @@ static int sh_mobile_ceu_videobuf_prepare(struct videobuf_queue *vq,
 
 	buf = container_of(vb, struct sh_mobile_ceu_buffer, vb);
 
-	dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %zd\n", __func__,
+	dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%08lx %zd\n", __func__,
 		vb, vb->baddr, vb->bsize);
 
 	/* Added list head initialization on alloc */
@@ -302,7 +302,7 @@ static void sh_mobile_ceu_videobuf_queue(struct videobuf_queue *vq,
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
 
-	dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %zd\n", __func__,
+	dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%08lx %zd\n", __func__,
 		vb, vb->baddr, vb->bsize);
 
 	vb->state = VIDEOBUF_QUEUED;
@@ -391,7 +391,7 @@ static int sh_mobile_ceu_add_device(struct soc_camera_device *icd)
 	if (pcdev->icd)
 		return -EBUSY;
 
-	dev_info(&icd->dev,
+	dev_info(icd->dev.parent,
 		 "SuperH Mobile CEU driver attached to camera %d\n",
 		 icd->devnum);
 
@@ -431,7 +431,7 @@ static void sh_mobile_ceu_remove_device(struct soc_camera_device *icd)
 
 	clk_disable(pcdev->clk);
 
-	dev_info(&icd->dev,
+	dev_info(icd->dev.parent,
 		 "SuperH Mobile CEU driver detached from camera %d\n",
 		 icd->devnum);
 
@@ -497,7 +497,7 @@ static void sh_mobile_ceu_set_rect(struct soc_camera_device *icd,
 	left = size_src(rect->left, hscale);
 	top = size_src(rect->top, vscale);
 
-	dev_dbg(&icd->dev, "Left %u * 0x%x = %u, top %u * 0x%x = %u\n",
+	dev_dbg(icd->dev.parent, "Left %u * 0x%x = %u, top %u * 0x%x = %u\n",
 		rect->left, hscale, left, rect->top, vscale, top);
 
 	if (left > cam->camera_rect.left) {
@@ -514,7 +514,7 @@ static void sh_mobile_ceu_set_rect(struct soc_camera_device *icd,
 		top = cam->camera_rect.top;
 	}
 
-	dev_dbg(&icd->dev, "New left %u, top %u, offsets %u:%u\n",
+	dev_dbg(icd->dev.parent, "New left %u, top %u, offsets %u:%u\n",
 		rect->left, rect->top, left_offset, top_offset);
 
 	if (pcdev->image_mode) {
@@ -687,7 +687,7 @@ static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd,
 	ceu_write(pcdev, CDOCR, value);
 	ceu_write(pcdev, CFWCR, 0); /* keep "datafetch firewall" disabled */
 
-	dev_dbg(&icd->dev, "S_FMT successful for %c%c%c%c %ux%u@%u:%u\n",
+	dev_dbg(icd->dev.parent, "S_FMT successful for %c%c%c%c %ux%u@%u:%u\n",
 		pixfmt & 0xff, (pixfmt >> 8) & 0xff,
 		(pixfmt >> 16) & 0xff, (pixfmt >> 24) & 0xff,
 		icd->rect_current.width, icd->rect_current.height,
@@ -744,7 +744,6 @@ static const struct soc_camera_data_format sh_mobile_ceu_formats[] = {
 static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, int idx,
 				     struct soc_camera_format_xlate *xlate)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	int ret, k, n;
 	int formats = 0;
 	struct sh_mobile_ceu_cam *cam;
@@ -794,7 +793,8 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, int idx,
 			xlate->cam_fmt = icd->formats + idx;
 			xlate->buswidth = icd->formats[idx].depth;
 			xlate++;
-			dev_dbg(ici->v4l2_dev.dev, "Providing format %s using %s\n",
+			dev_dbg(icd->dev.parent,
+				"Providing format %s using %s\n",
 				sh_mobile_ceu_formats[k].name,
 				icd->formats[idx].name);
 		}
@@ -807,7 +807,7 @@ add_single_format:
 			xlate->cam_fmt = icd->formats + idx;
 			xlate->buswidth = icd->formats[idx].depth;
 			xlate++;
-			dev_dbg(ici->v4l2_dev.dev,
+			dev_dbg(icd->dev.parent,
 				"Providing format %s in pass-through mode\n",
 				icd->formats[idx].name);
 		}
@@ -870,19 +870,21 @@ static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd,
 	target = *cam_rect;
 
 	capsr = capture_save_reset(pcdev);
-	dev_dbg(&icd->dev, "CAPSR 0x%x, CFLCR 0x%x\n", capsr, pcdev->cflcr);
+	dev_dbg(icd->dev.parent, "CAPSR 0x%x, CFLCR 0x%x\n",
+		capsr, pcdev->cflcr);
 
 	/* First attempt - see if the client can deliver a perfect result */
 	ret = v4l2_subdev_call(sd, video, s_crop, &cam_crop);
 	if (!ret && !memcmp(&target, &cam_rect, sizeof(target))) {
-		dev_dbg(&icd->dev, "Camera S_CROP successful for %ux%u@%u:%u\n",
+		dev_dbg(icd->dev.parent,
+			"Camera S_CROP successful for %ux%u@%u:%u\n",
 			cam_rect->width, cam_rect->height,
 			cam_rect->left, cam_rect->top);
 		goto ceu_set_rect;
 	}
 
 	/* Try to fix cropping, that camera hasn't managed to do */
-	dev_dbg(&icd->dev, "Fix camera S_CROP %d for %ux%u@%u:%u"
+	dev_dbg(icd->dev.parent, "Fix camera S_CROP %d for %ux%u@%u:%u"
 		" to %ux%u@%u:%u\n",
 		ret, cam_rect->width, cam_rect->height,
 		cam_rect->left, cam_rect->top,
@@ -933,7 +935,7 @@ static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd,
 					    cam_rect->height, cam_max.top);
 
 		ret = v4l2_subdev_call(sd, video, s_crop, &cam_crop);
-		dev_dbg(&icd->dev, "Camera S_CROP %d for %ux%u@%u:%u\n",
+		dev_dbg(icd->dev.parent, "Camera S_CROP %d for %ux%u@%u:%u\n",
 			ret, cam_rect->width, cam_rect->height,
 			cam_rect->left, cam_rect->top);
 	}
@@ -951,7 +953,8 @@ static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd,
 		 */
 		*cam_rect = cam_max;
 		ret = v4l2_subdev_call(sd, video, s_crop, &cam_crop);
-		dev_dbg(&icd->dev, "Camera S_CROP %d for max %ux%u@%u:%u\n",
+		dev_dbg(icd->dev.parent,
+			"Camera S_CROP %d for max %ux%u@%u:%u\n",
 			ret, cam_rect->width, cam_rect->height,
 			cam_rect->left, cam_rect->top);
 		if (ret < 0 && ret != -ENOIOCTLCMD)
@@ -979,7 +982,7 @@ static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd,
 	 * last before last close() _user_ rectangle, which can be different
 	 * from camera rectangle.
 	 */
-	dev_dbg(&icd->dev,
+	dev_dbg(icd->dev.parent,
 		"SH S_CROP from %ux%u@%u:%u to %ux%u@%u:%u, scale to %ux%u@%u:%u\n",
 		cam_rect->width, cam_rect->height, cam_rect->left, cam_rect->top,
 		target.width, target.height, target.left, target.top,
@@ -1037,14 +1040,15 @@ static int sh_mobile_ceu_set_fmt(struct soc_camera_device *icd,
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
 	if (!xlate) {
-		dev_warn(ici->v4l2_dev.dev, "Format %x not found\n", pixfmt);
+		dev_warn(icd->dev.parent, "Format %x not found\n", pixfmt);
 		return -EINVAL;
 	}
 
 	pix->pixelformat = xlate->cam_fmt->fourcc;
 	ret = v4l2_subdev_call(sd, video, s_fmt, f);
 	pix->pixelformat = pixfmt;
-	dev_dbg(&icd->dev, "Camera %d fmt %ux%u, requested %ux%u, max %ux%u\n",
+	dev_dbg(icd->dev.parent,
+		"Camera %d fmt %ux%u, requested %ux%u, max %ux%u\n",
 		ret, pix->width, pix->height, width, height,
 		icd->rect_max.width, icd->rect_max.height);
 	if (ret < 0)
@@ -1084,12 +1088,12 @@ static int sh_mobile_ceu_set_fmt(struct soc_camera_device *icd,
 		pix->pixelformat = xlate->cam_fmt->fourcc;
 		ret = v4l2_subdev_call(sd, video, s_fmt, f);
 		pix->pixelformat = pixfmt;
-		dev_dbg(&icd->dev, "Camera scaled to %ux%u\n",
+		dev_dbg(icd->dev.parent, "Camera scaled to %ux%u\n",
 			pix->width, pix->height);
 		if (ret < 0) {
 			/* This shouldn't happen */
-			dev_err(&icd->dev, "Client failed to set format: %d\n",
-				ret);
+			dev_err(icd->dev.parent,
+				"Client failed to set format: %d\n", ret);
 			return ret;
 		}
 	}
@@ -1105,7 +1109,7 @@ static int sh_mobile_ceu_set_fmt(struct soc_camera_device *icd,
 	hscale = calc_scale(pix->width, &width);
 	vscale = calc_scale(pix->height, &height);
 
-	dev_dbg(&icd->dev, "W: %u : 0x%x = %u, H: %u : 0x%x = %u\n",
+	dev_dbg(icd->dev.parent, "W: %u : 0x%x = %u, H: %u : 0x%x = %u\n",
 		pix->width, hscale, width, pix->height, vscale, height);
 
 out:
@@ -1136,7 +1140,6 @@ out:
 static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd,
 				 struct v4l2_format *f)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	const struct soc_camera_format_xlate *xlate;
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
@@ -1146,7 +1149,7 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd,
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
 	if (!xlate) {
-		dev_warn(ici->v4l2_dev.dev, "Format %x not found\n", pixfmt);
+		dev_warn(icd->dev.parent, "Format %x not found\n", pixfmt);
 		return -EINVAL;
 	}
 
@@ -1184,7 +1187,7 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd,
 			ret = v4l2_subdev_call(sd, video, try_fmt, f);
 			if (ret < 0) {
 				/* Shouldn't actually happen... */
-				dev_err(&icd->dev,
+				dev_err(icd->dev.parent,
 					"FIXME: try_fmt() returned %d\n", ret);
 				pix->width = tmp_w;
 				pix->height = tmp_h;
@@ -1253,7 +1256,7 @@ static void sh_mobile_ceu_init_videobuf(struct videobuf_queue *q,
 
 	videobuf_queue_dma_contig_init(q,
 				       &sh_mobile_ceu_videobuf_ops,
-				       ici->v4l2_dev.dev, &pcdev->lock,
+				       icd->dev.parent, &pcdev->lock,
 				       V4L2_BUF_TYPE_VIDEO_CAPTURE,
 				       pcdev->is_interlaced ?
 				       V4L2_FIELD_INTERLACED : V4L2_FIELD_NONE,
-- 
cgit v1.2.3


From 6a6c8786725c0b3d143674effa8b772f47b1c189 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 25 Aug 2009 11:50:46 -0300
Subject: V4L/DVB (12534): soc-camera: V4L2 API compliant scaling (S_FMT) and
 cropping (S_CROP)

The initial soc-camera scaling and cropping implementation turned out to be
incompliant with the V4L2 API, e.g., it expected the user to specify cropping
in output window pixels, instead of input window pixels. This patch converts
the soc-camera core and all drivers to comply with the standard.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/mt9m001.c              | 142 ++++-
 drivers/media/video/mt9m111.c              | 112 +++-
 drivers/media/video/mt9t031.c              | 220 ++++----
 drivers/media/video/mt9v022.c              | 131 ++++-
 drivers/media/video/mx1_camera.c           |  10 +-
 drivers/media/video/mx3_camera.c           | 114 ++--
 drivers/media/video/ov772x.c               |  84 ++-
 drivers/media/video/pxa_camera.c           | 201 +++++--
 drivers/media/video/sh_mobile_ceu_camera.c | 828 ++++++++++++++++++++---------
 drivers/media/video/soc_camera.c           | 130 +++--
 drivers/media/video/soc_camera_platform.c  |   4 -
 drivers/media/video/tw9910.c               | 120 +++--
 12 files changed, 1465 insertions(+), 631 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/mt9m001.c b/drivers/media/video/mt9m001.c
index 775e1a3c98d..e8cf56189ef 100644
--- a/drivers/media/video/mt9m001.c
+++ b/drivers/media/video/mt9m001.c
@@ -39,6 +39,13 @@
 #define MT9M001_GLOBAL_GAIN		0x35
 #define MT9M001_CHIP_ENABLE		0xF1
 
+#define MT9M001_MAX_WIDTH		1280
+#define MT9M001_MAX_HEIGHT		1024
+#define MT9M001_MIN_WIDTH		48
+#define MT9M001_MIN_HEIGHT		32
+#define MT9M001_COLUMN_SKIP		20
+#define MT9M001_ROW_SKIP		12
+
 static const struct soc_camera_data_format mt9m001_colour_formats[] = {
 	/* Order important: first natively supported,
 	 * second supported with a GPIO extender */
@@ -70,6 +77,8 @@ static const struct soc_camera_data_format mt9m001_monochrome_formats[] = {
 
 struct mt9m001 {
 	struct v4l2_subdev subdev;
+	struct v4l2_rect rect;	/* Sensor window */
+	__u32 fourcc;
 	int model;	/* V4L2_IDENT_MT9M001* codes from v4l2-chip-ident.h */
 	unsigned char autoexposure;
 };
@@ -196,13 +205,31 @@ static unsigned long mt9m001_query_bus_param(struct soc_camera_device *icd)
 
 static int mt9m001_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 {
-	struct v4l2_rect *rect = &a->c;
 	struct i2c_client *client = sd->priv;
 	struct mt9m001 *mt9m001 = to_mt9m001(client);
+	struct v4l2_rect rect = a->c;
 	struct soc_camera_device *icd = client->dev.platform_data;
 	int ret;
 	const u16 hblank = 9, vblank = 25;
 
+	if (mt9m001->fourcc == V4L2_PIX_FMT_SBGGR8 ||
+	    mt9m001->fourcc == V4L2_PIX_FMT_SBGGR16)
+		/*
+		 * Bayer format - even number of rows for simplicity,
+		 * but let the user play with the top row.
+		 */
+		rect.height = ALIGN(rect.height, 2);
+
+	/* Datasheet requirement: see register description */
+	rect.width = ALIGN(rect.width, 2);
+	rect.left = ALIGN(rect.left, 2);
+
+	soc_camera_limit_side(&rect.left, &rect.width,
+		     MT9M001_COLUMN_SKIP, MT9M001_MIN_WIDTH, MT9M001_MAX_WIDTH);
+
+	soc_camera_limit_side(&rect.top, &rect.height,
+		     MT9M001_ROW_SKIP, MT9M001_MIN_HEIGHT, MT9M001_MAX_HEIGHT);
+
 	/* Blanking and start values - default... */
 	ret = reg_write(client, MT9M001_HORIZONTAL_BLANKING, hblank);
 	if (!ret)
@@ -211,46 +238,98 @@ static int mt9m001_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 	/* The caller provides a supported format, as verified per
 	 * call to icd->try_fmt() */
 	if (!ret)
-		ret = reg_write(client, MT9M001_COLUMN_START, rect->left);
+		ret = reg_write(client, MT9M001_COLUMN_START, rect.left);
 	if (!ret)
-		ret = reg_write(client, MT9M001_ROW_START, rect->top);
+		ret = reg_write(client, MT9M001_ROW_START, rect.top);
 	if (!ret)
-		ret = reg_write(client, MT9M001_WINDOW_WIDTH, rect->width - 1);
+		ret = reg_write(client, MT9M001_WINDOW_WIDTH, rect.width - 1);
 	if (!ret)
 		ret = reg_write(client, MT9M001_WINDOW_HEIGHT,
-				rect->height + icd->y_skip_top - 1);
+				rect.height + icd->y_skip_top - 1);
 	if (!ret && mt9m001->autoexposure) {
 		ret = reg_write(client, MT9M001_SHUTTER_WIDTH,
-				rect->height + icd->y_skip_top + vblank);
+				rect.height + icd->y_skip_top + vblank);
 		if (!ret) {
 			const struct v4l2_queryctrl *qctrl =
 				soc_camera_find_qctrl(icd->ops,
 						      V4L2_CID_EXPOSURE);
-			icd->exposure = (524 + (rect->height + icd->y_skip_top +
+			icd->exposure = (524 + (rect.height + icd->y_skip_top +
 						vblank - 1) *
 					 (qctrl->maximum - qctrl->minimum)) /
 				1048 + qctrl->minimum;
 		}
 	}
 
+	if (!ret)
+		mt9m001->rect = rect;
+
 	return ret;
 }
 
+static int mt9m001_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
+{
+	struct i2c_client *client = sd->priv;
+	struct mt9m001 *mt9m001 = to_mt9m001(client);
+
+	a->c	= mt9m001->rect;
+	a->type	= V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+	return 0;
+}
+
+static int mt9m001_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
+{
+	a->bounds.left			= MT9M001_COLUMN_SKIP;
+	a->bounds.top			= MT9M001_ROW_SKIP;
+	a->bounds.width			= MT9M001_MAX_WIDTH;
+	a->bounds.height		= MT9M001_MAX_HEIGHT;
+	a->defrect			= a->bounds;
+	a->type				= V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	a->pixelaspect.numerator	= 1;
+	a->pixelaspect.denominator	= 1;
+
+	return 0;
+}
+
+static int mt9m001_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
+{
+	struct i2c_client *client = sd->priv;
+	struct mt9m001 *mt9m001 = to_mt9m001(client);
+	struct v4l2_pix_format *pix = &f->fmt.pix;
+
+	pix->width		= mt9m001->rect.width;
+	pix->height		= mt9m001->rect.height;
+	pix->pixelformat	= mt9m001->fourcc;
+	pix->field		= V4L2_FIELD_NONE;
+	pix->colorspace		= V4L2_COLORSPACE_SRGB;
+
+	return 0;
+}
+
 static int mt9m001_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
 {
 	struct i2c_client *client = sd->priv;
-	struct soc_camera_device *icd = client->dev.platform_data;
+	struct mt9m001 *mt9m001 = to_mt9m001(client);
+	struct v4l2_pix_format *pix = &f->fmt.pix;
 	struct v4l2_crop a = {
 		.c = {
-			.left	= icd->rect_current.left,
-			.top	= icd->rect_current.top,
-			.width	= f->fmt.pix.width,
-			.height	= f->fmt.pix.height,
+			.left	= mt9m001->rect.left,
+			.top	= mt9m001->rect.top,
+			.width	= pix->width,
+			.height	= pix->height,
 		},
 	};
+	int ret;
 
 	/* No support for scaling so far, just crop. TODO: use skipping */
-	return mt9m001_s_crop(sd, &a);
+	ret = mt9m001_s_crop(sd, &a);
+	if (!ret) {
+		pix->width = mt9m001->rect.width;
+		pix->height = mt9m001->rect.height;
+		mt9m001->fourcc = pix->pixelformat;
+	}
+
+	return ret;
 }
 
 static int mt9m001_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
@@ -259,9 +338,14 @@ static int mt9m001_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
 	struct soc_camera_device *icd = client->dev.platform_data;
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 
-	v4l_bound_align_image(&pix->width, 48, 1280, 1,
-			      &pix->height, 32 + icd->y_skip_top,
-			      1024 + icd->y_skip_top, 0, 0);
+	v4l_bound_align_image(&pix->width, MT9M001_MIN_WIDTH,
+		MT9M001_MAX_WIDTH, 1,
+		&pix->height, MT9M001_MIN_HEIGHT + icd->y_skip_top,
+		MT9M001_MAX_HEIGHT + icd->y_skip_top, 0, 0);
+
+	if (pix->pixelformat == V4L2_PIX_FMT_SBGGR8 ||
+	    pix->pixelformat == V4L2_PIX_FMT_SBGGR16)
+		pix->height = ALIGN(pix->height - 1, 2);
 
 	return 0;
 }
@@ -472,11 +556,11 @@ static int mt9m001_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 		if (ctrl->value) {
 			const u16 vblank = 25;
 			if (reg_write(client, MT9M001_SHUTTER_WIDTH,
-				      icd->rect_current.height +
+				      mt9m001->rect.height +
 				      icd->y_skip_top + vblank) < 0)
 				return -EIO;
 			qctrl = soc_camera_find_qctrl(icd->ops, V4L2_CID_EXPOSURE);
-			icd->exposure = (524 + (icd->rect_current.height +
+			icd->exposure = (524 + (mt9m001->rect.height +
 						icd->y_skip_top + vblank - 1) *
 					 (qctrl->maximum - qctrl->minimum)) /
 				1048 + qctrl->minimum;
@@ -548,6 +632,8 @@ static int mt9m001_video_probe(struct soc_camera_device *icd,
 	if (flags & SOCAM_DATAWIDTH_8)
 		icd->num_formats++;
 
+	mt9m001->fourcc = icd->formats->fourcc;
+
 	dev_info(&client->dev, "Detected a MT9M001 chip ID %x (%s)\n", data,
 		 data == 0x8431 ? "C12STM" : "C12ST");
 
@@ -556,10 +642,9 @@ static int mt9m001_video_probe(struct soc_camera_device *icd,
 
 static void mt9m001_video_remove(struct soc_camera_device *icd)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 	struct soc_camera_link *icl = to_soc_camera_link(icd);
 
-	dev_dbg(&client->dev, "Video %x removed: %p, %p\n", client->addr,
+	dev_dbg(&icd->dev, "Video removed: %p, %p\n",
 		icd->dev.parent, icd->vdev);
 	if (icl->free_bus)
 		icl->free_bus(icl);
@@ -578,8 +663,11 @@ static struct v4l2_subdev_core_ops mt9m001_subdev_core_ops = {
 static struct v4l2_subdev_video_ops mt9m001_subdev_video_ops = {
 	.s_stream	= mt9m001_s_stream,
 	.s_fmt		= mt9m001_s_fmt,
+	.g_fmt		= mt9m001_g_fmt,
 	.try_fmt	= mt9m001_try_fmt,
 	.s_crop		= mt9m001_s_crop,
+	.g_crop		= mt9m001_g_crop,
+	.cropcap	= mt9m001_cropcap,
 };
 
 static struct v4l2_subdev_ops mt9m001_subdev_ops = {
@@ -621,15 +709,13 @@ static int mt9m001_probe(struct i2c_client *client,
 
 	/* Second stage probe - when a capture adapter is there */
 	icd->ops		= &mt9m001_ops;
-	icd->rect_max.left	= 20;
-	icd->rect_max.top	= 12;
-	icd->rect_max.width	= 1280;
-	icd->rect_max.height	= 1024;
-	icd->rect_current.left	= 20;
-	icd->rect_current.top	= 12;
-	icd->width_min		= 48;
-	icd->height_min		= 32;
 	icd->y_skip_top		= 1;
+
+	mt9m001->rect.left	= MT9M001_COLUMN_SKIP;
+	mt9m001->rect.top	= MT9M001_ROW_SKIP;
+	mt9m001->rect.width	= MT9M001_MAX_WIDTH;
+	mt9m001->rect.height	= MT9M001_MAX_HEIGHT;
+
 	/* Simulated autoexposure. If enabled, we calculate shutter width
 	 * ourselves in the driver based on vertical blanking and frame width */
 	mt9m001->autoexposure = 1;
diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c
index 3637376da75..920dd53c4cf 100644
--- a/drivers/media/video/mt9m111.c
+++ b/drivers/media/video/mt9m111.c
@@ -194,7 +194,7 @@ static int mt9m111_reg_read(struct i2c_client *client, const u16 reg)
 
 	ret = reg_page_map_set(client, reg);
 	if (!ret)
-		ret = swab16(i2c_smbus_read_word_data(client, (reg & 0xff)));
+		ret = swab16(i2c_smbus_read_word_data(client, reg & 0xff));
 
 	dev_dbg(&client->dev, "read  reg.%03x -> %04x\n", reg, ret);
 	return ret;
@@ -257,8 +257,8 @@ static int mt9m111_setup_rect(struct i2c_client *client,
 	int width = rect->width;
 	int height = rect->height;
 
-	if ((mt9m111->pixfmt == V4L2_PIX_FMT_SBGGR8)
-	    || (mt9m111->pixfmt == V4L2_PIX_FMT_SBGGR16))
+	if (mt9m111->pixfmt == V4L2_PIX_FMT_SBGGR8 ||
+	    mt9m111->pixfmt == V4L2_PIX_FMT_SBGGR16)
 		is_raw_format = 1;
 	else
 		is_raw_format = 0;
@@ -395,23 +395,85 @@ static int mt9m111_set_bus_param(struct soc_camera_device *icd, unsigned long f)
 	return 0;
 }
 
+static int mt9m111_make_rect(struct i2c_client *client,
+			     struct v4l2_rect *rect)
+{
+	struct mt9m111 *mt9m111 = to_mt9m111(client);
+
+	if (mt9m111->pixfmt == V4L2_PIX_FMT_SBGGR8 ||
+	    mt9m111->pixfmt == V4L2_PIX_FMT_SBGGR16) {
+		/* Bayer format - even size lengths */
+		rect->width	= ALIGN(rect->width, 2);
+		rect->height	= ALIGN(rect->height, 2);
+		/* Let the user play with the starting pixel */
+	}
+
+	/* FIXME: the datasheet doesn't specify minimum sizes */
+	soc_camera_limit_side(&rect->left, &rect->width,
+		     MT9M111_MIN_DARK_COLS, 2, MT9M111_MAX_WIDTH);
+
+	soc_camera_limit_side(&rect->top, &rect->height,
+		     MT9M111_MIN_DARK_ROWS, 2, MT9M111_MAX_HEIGHT);
+
+	return mt9m111_setup_rect(client, rect);
+}
+
 static int mt9m111_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 {
-	struct v4l2_rect *rect = &a->c;
+	struct v4l2_rect rect = a->c;
 	struct i2c_client *client = sd->priv;
 	struct mt9m111 *mt9m111 = to_mt9m111(client);
 	int ret;
 
 	dev_dbg(&client->dev, "%s left=%d, top=%d, width=%d, height=%d\n",
-		__func__, rect->left, rect->top, rect->width,
-		rect->height);
+		__func__, rect.left, rect.top, rect.width, rect.height);
 
-	ret = mt9m111_setup_rect(client, rect);
+	ret = mt9m111_make_rect(client, &rect);
 	if (!ret)
-		mt9m111->rect = *rect;
+		mt9m111->rect = rect;
 	return ret;
 }
 
+static int mt9m111_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
+{
+	struct i2c_client *client = sd->priv;
+	struct mt9m111 *mt9m111 = to_mt9m111(client);
+
+	a->c	= mt9m111->rect;
+	a->type	= V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+	return 0;
+}
+
+static int mt9m111_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
+{
+	a->bounds.left			= MT9M111_MIN_DARK_COLS;
+	a->bounds.top			= MT9M111_MIN_DARK_ROWS;
+	a->bounds.width			= MT9M111_MAX_WIDTH;
+	a->bounds.height		= MT9M111_MAX_HEIGHT;
+	a->defrect			= a->bounds;
+	a->type				= V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	a->pixelaspect.numerator	= 1;
+	a->pixelaspect.denominator	= 1;
+
+	return 0;
+}
+
+static int mt9m111_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
+{
+	struct i2c_client *client = sd->priv;
+	struct mt9m111 *mt9m111 = to_mt9m111(client);
+	struct v4l2_pix_format *pix = &f->fmt.pix;
+
+	pix->width		= mt9m111->rect.width;
+	pix->height		= mt9m111->rect.height;
+	pix->pixelformat	= mt9m111->pixfmt;
+	pix->field		= V4L2_FIELD_NONE;
+	pix->colorspace		= V4L2_COLORSPACE_SRGB;
+
+	return 0;
+}
+
 static int mt9m111_set_pixfmt(struct i2c_client *client, u32 pixfmt)
 {
 	struct mt9m111 *mt9m111 = to_mt9m111(client);
@@ -478,7 +540,7 @@ static int mt9m111_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
 		__func__, pix->pixelformat, rect.left, rect.top, rect.width,
 		rect.height);
 
-	ret = mt9m111_setup_rect(client, &rect);
+	ret = mt9m111_make_rect(client, &rect);
 	if (!ret)
 		ret = mt9m111_set_pixfmt(client, pix->pixelformat);
 	if (!ret)
@@ -489,11 +551,27 @@ static int mt9m111_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
 static int mt9m111_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
 {
 	struct v4l2_pix_format *pix = &f->fmt.pix;
+	bool bayer = pix->pixelformat == V4L2_PIX_FMT_SBGGR8 ||
+		pix->pixelformat == V4L2_PIX_FMT_SBGGR16;
+
+	/*
+	 * With Bayer format enforce even side lengths, but let the user play
+	 * with the starting pixel
+	 */
 
 	if (pix->height > MT9M111_MAX_HEIGHT)
 		pix->height = MT9M111_MAX_HEIGHT;
+	else if (pix->height < 2)
+		pix->height = 2;
+	else if (bayer)
+		pix->height = ALIGN(pix->height, 2);
+
 	if (pix->width > MT9M111_MAX_WIDTH)
 		pix->width = MT9M111_MAX_WIDTH;
+	else if (pix->width < 2)
+		pix->width = 2;
+	else if (bayer)
+		pix->width = ALIGN(pix->width, 2);
 
 	return 0;
 }
@@ -906,8 +984,11 @@ static struct v4l2_subdev_core_ops mt9m111_subdev_core_ops = {
 
 static struct v4l2_subdev_video_ops mt9m111_subdev_video_ops = {
 	.s_fmt		= mt9m111_s_fmt,
+	.g_fmt		= mt9m111_g_fmt,
 	.try_fmt	= mt9m111_try_fmt,
 	.s_crop		= mt9m111_s_crop,
+	.g_crop		= mt9m111_g_crop,
+	.cropcap	= mt9m111_cropcap,
 };
 
 static struct v4l2_subdev_ops mt9m111_subdev_ops = {
@@ -949,16 +1030,13 @@ static int mt9m111_probe(struct i2c_client *client,
 
 	/* Second stage probe - when a capture adapter is there */
 	icd->ops		= &mt9m111_ops;
-	icd->rect_max.left	= MT9M111_MIN_DARK_COLS;
-	icd->rect_max.top	= MT9M111_MIN_DARK_ROWS;
-	icd->rect_max.width	= MT9M111_MAX_WIDTH;
-	icd->rect_max.height	= MT9M111_MAX_HEIGHT;
-	icd->rect_current.left	= icd->rect_max.left;
-	icd->rect_current.top	= icd->rect_max.top;
-	icd->width_min		= MT9M111_MIN_DARK_ROWS;
-	icd->height_min		= MT9M111_MIN_DARK_COLS;
 	icd->y_skip_top		= 0;
 
+	mt9m111->rect.left	= MT9M111_MIN_DARK_COLS;
+	mt9m111->rect.top	= MT9M111_MIN_DARK_ROWS;
+	mt9m111->rect.width	= MT9M111_MAX_WIDTH;
+	mt9m111->rect.height	= MT9M111_MAX_HEIGHT;
+
 	ret = mt9m111_video_probe(icd, client);
 	if (ret) {
 		icd->ops = NULL;
diff --git a/drivers/media/video/mt9t031.c b/drivers/media/video/mt9t031.c
index cd3eb7731ac..f234ba60204 100644
--- a/drivers/media/video/mt9t031.c
+++ b/drivers/media/video/mt9t031.c
@@ -47,7 +47,7 @@
 #define MT9T031_MAX_HEIGHT		1536
 #define MT9T031_MAX_WIDTH		2048
 #define MT9T031_MIN_HEIGHT		2
-#define MT9T031_MIN_WIDTH		2
+#define MT9T031_MIN_WIDTH		18
 #define MT9T031_HORIZONTAL_BLANK	142
 #define MT9T031_VERTICAL_BLANK		25
 #define MT9T031_COLUMN_SKIP		32
@@ -69,10 +69,11 @@ static const struct soc_camera_data_format mt9t031_colour_formats[] = {
 
 struct mt9t031 {
 	struct v4l2_subdev subdev;
+	struct v4l2_rect rect;	/* Sensor window */
 	int model;	/* V4L2_IDENT_MT9T031* codes from v4l2-chip-ident.h */
-	unsigned char autoexposure;
 	u16 xskip;
 	u16 yskip;
+	unsigned char autoexposure;
 };
 
 static struct mt9t031 *to_mt9t031(const struct i2c_client *client)
@@ -218,56 +219,68 @@ static unsigned long mt9t031_query_bus_param(struct soc_camera_device *icd)
 	return soc_camera_apply_sensor_flags(icl, MT9T031_BUS_PARAM);
 }
 
-/* Round up minima and round down maxima */
-static void recalculate_limits(struct soc_camera_device *icd,
-			       u16 xskip, u16 yskip)
+/* target must be _even_ */
+static u16 mt9t031_skip(s32 *source, s32 target, s32 max)
 {
-	icd->rect_max.left = (MT9T031_COLUMN_SKIP + xskip - 1) / xskip;
-	icd->rect_max.top = (MT9T031_ROW_SKIP + yskip - 1) / yskip;
-	icd->width_min = (MT9T031_MIN_WIDTH + xskip - 1) / xskip;
-	icd->height_min = (MT9T031_MIN_HEIGHT + yskip - 1) / yskip;
-	icd->rect_max.width = MT9T031_MAX_WIDTH / xskip;
-	icd->rect_max.height = MT9T031_MAX_HEIGHT / yskip;
+	unsigned int skip;
+
+	if (*source < target + target / 2) {
+		*source = target;
+		return 1;
+	}
+
+	skip = min(max, *source + target / 2) / target;
+	if (skip > 8)
+		skip = 8;
+	*source = target * skip;
+
+	return skip;
 }
 
+/* rect is the sensor rectangle, the caller guarantees parameter validity */
 static int mt9t031_set_params(struct soc_camera_device *icd,
 			      struct v4l2_rect *rect, u16 xskip, u16 yskip)
 {
 	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 	struct mt9t031 *mt9t031 = to_mt9t031(client);
 	int ret;
-	u16 xbin, ybin, width, height, left, top;
+	u16 xbin, ybin;
 	const u16 hblank = MT9T031_HORIZONTAL_BLANK,
 		vblank = MT9T031_VERTICAL_BLANK;
 
-	width = rect->width * xskip;
-	height = rect->height * yskip;
-	left = rect->left * xskip;
-	top = rect->top * yskip;
-
 	xbin = min(xskip, (u16)3);
 	ybin = min(yskip, (u16)3);
 
-	dev_dbg(&client->dev, "xskip %u, width %u/%u, yskip %u, height %u/%u\n",
-		xskip, width, rect->width, yskip, height, rect->height);
-
-	/* Could just do roundup(rect->left, [xy]bin * 2); but this is cheaper */
+	/*
+	 * Could just do roundup(rect->left, [xy]bin * 2); but this is cheaper.
+	 * There is always a valid suitably aligned value. The worst case is
+	 * xbin = 3, width = 2048. Then we will start at 36, the last read out
+	 * pixel will be 2083, which is < 2085 - first black pixel.
+	 *
+	 * MT9T031 datasheet imposes window left border alignment, depending on
+	 * the selected xskip. Failing to conform to this requirement produces
+	 * dark horizontal stripes in the image. However, even obeying to this
+	 * requirement doesn't eliminate the stripes in all configurations. They
+	 * appear "locally reproducibly," but can differ between tests under
+	 * different lighting conditions.
+	 */
 	switch (xbin) {
-	case 2:
-		left = (left + 3) & ~3;
+	case 1:
+		rect->left &= ~1;
 		break;
-	case 3:
-		left = roundup(left, 6);
-	}
-
-	switch (ybin) {
 	case 2:
-		top = (top + 3) & ~3;
+		rect->left &= ~3;
 		break;
 	case 3:
-		top = roundup(top, 6);
+		rect->left = rect->left > roundup(MT9T031_COLUMN_SKIP, 6) ?
+			(rect->left / 6) * 6 : roundup(MT9T031_COLUMN_SKIP, 6);
 	}
 
+	rect->top &= ~1;
+
+	dev_dbg(&client->dev, "skip %u:%u, rect %ux%u@%u:%u\n",
+		xskip, yskip, rect->width, rect->height, rect->left, rect->top);
+
 	/* Disable register update, reconfigure atomically */
 	ret = reg_set(client, MT9T031_OUTPUT_CONTROL, 1);
 	if (ret < 0)
@@ -287,27 +300,29 @@ static int mt9t031_set_params(struct soc_camera_device *icd,
 			ret = reg_write(client, MT9T031_ROW_ADDRESS_MODE,
 					((ybin - 1) << 4) | (yskip - 1));
 	}
-	dev_dbg(&client->dev, "new physical left %u, top %u\n", left, top);
+	dev_dbg(&client->dev, "new physical left %u, top %u\n",
+		rect->left, rect->top);
 
 	/* The caller provides a supported format, as guaranteed by
 	 * icd->try_fmt_cap(), soc_camera_s_crop() and soc_camera_cropcap() */
 	if (ret >= 0)
-		ret = reg_write(client, MT9T031_COLUMN_START, left);
+		ret = reg_write(client, MT9T031_COLUMN_START, rect->left);
 	if (ret >= 0)
-		ret = reg_write(client, MT9T031_ROW_START, top);
+		ret = reg_write(client, MT9T031_ROW_START, rect->top);
 	if (ret >= 0)
-		ret = reg_write(client, MT9T031_WINDOW_WIDTH, width - 1);
+		ret = reg_write(client, MT9T031_WINDOW_WIDTH, rect->width - 1);
 	if (ret >= 0)
 		ret = reg_write(client, MT9T031_WINDOW_HEIGHT,
-				height + icd->y_skip_top - 1);
+				rect->height + icd->y_skip_top - 1);
 	if (ret >= 0 && mt9t031->autoexposure) {
-		ret = set_shutter(client, height + icd->y_skip_top + vblank);
+		ret = set_shutter(client,
+				  rect->height + icd->y_skip_top + vblank);
 		if (ret >= 0) {
 			const u32 shutter_max = MT9T031_MAX_HEIGHT + vblank;
 			const struct v4l2_queryctrl *qctrl =
 				soc_camera_find_qctrl(icd->ops,
 						      V4L2_CID_EXPOSURE);
-			icd->exposure = (shutter_max / 2 + (height +
+			icd->exposure = (shutter_max / 2 + (rect->height +
 					 icd->y_skip_top + vblank - 1) *
 					 (qctrl->maximum - qctrl->minimum)) /
 				shutter_max + qctrl->minimum;
@@ -318,27 +333,72 @@ static int mt9t031_set_params(struct soc_camera_device *icd,
 	if (ret >= 0)
 		ret = reg_clear(client, MT9T031_OUTPUT_CONTROL, 1);
 
+	if (ret >= 0) {
+		mt9t031->rect = *rect;
+		mt9t031->xskip = xskip;
+		mt9t031->yskip = yskip;
+	}
+
 	return ret < 0 ? ret : 0;
 }
 
 static int mt9t031_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 {
-	struct v4l2_rect *rect = &a->c;
+	struct v4l2_rect rect = a->c;
 	struct i2c_client *client = sd->priv;
 	struct mt9t031 *mt9t031 = to_mt9t031(client);
 	struct soc_camera_device *icd = client->dev.platform_data;
 
-	/* Make sure we don't exceed sensor limits */
-	if (rect->left + rect->width > icd->rect_max.left + icd->rect_max.width)
-		rect->left = icd->rect_max.width + icd->rect_max.left -
-			rect->width;
+	rect.width = ALIGN(rect.width, 2);
+	rect.height = ALIGN(rect.height, 2);
+
+	soc_camera_limit_side(&rect.left, &rect.width,
+		     MT9T031_COLUMN_SKIP, MT9T031_MIN_WIDTH, MT9T031_MAX_WIDTH);
+
+	soc_camera_limit_side(&rect.top, &rect.height,
+		     MT9T031_ROW_SKIP, MT9T031_MIN_HEIGHT, MT9T031_MAX_HEIGHT);
+
+	return mt9t031_set_params(icd, &rect, mt9t031->xskip, mt9t031->yskip);
+}
+
+static int mt9t031_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
+{
+	struct i2c_client *client = sd->priv;
+	struct mt9t031 *mt9t031 = to_mt9t031(client);
+
+	a->c	= mt9t031->rect;
+	a->type	= V4L2_BUF_TYPE_VIDEO_CAPTURE;
 
-	if (rect->top + rect->height > icd->rect_max.height + icd->rect_max.top)
-		rect->top = icd->rect_max.height + icd->rect_max.top -
-			rect->height;
+	return 0;
+}
+
+static int mt9t031_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
+{
+	a->bounds.left			= MT9T031_COLUMN_SKIP;
+	a->bounds.top			= MT9T031_ROW_SKIP;
+	a->bounds.width			= MT9T031_MAX_WIDTH;
+	a->bounds.height		= MT9T031_MAX_HEIGHT;
+	a->defrect			= a->bounds;
+	a->type				= V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	a->pixelaspect.numerator	= 1;
+	a->pixelaspect.denominator	= 1;
 
-	/* CROP - no change in scaling, or in limits */
-	return mt9t031_set_params(icd, rect, mt9t031->xskip, mt9t031->yskip);
+	return 0;
+}
+
+static int mt9t031_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
+{
+	struct i2c_client *client = sd->priv;
+	struct mt9t031 *mt9t031 = to_mt9t031(client);
+	struct v4l2_pix_format *pix = &f->fmt.pix;
+
+	pix->width		= mt9t031->rect.width / mt9t031->xskip;
+	pix->height		= mt9t031->rect.height / mt9t031->yskip;
+	pix->pixelformat	= V4L2_PIX_FMT_SGRBG10;
+	pix->field		= V4L2_FIELD_NONE;
+	pix->colorspace		= V4L2_COLORSPACE_SRGB;
+
+	return 0;
 }
 
 static int mt9t031_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
@@ -346,40 +406,25 @@ static int mt9t031_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
 	struct i2c_client *client = sd->priv;
 	struct mt9t031 *mt9t031 = to_mt9t031(client);
 	struct soc_camera_device *icd = client->dev.platform_data;
-	int ret;
+	struct v4l2_pix_format *pix = &f->fmt.pix;
 	u16 xskip, yskip;
-	struct v4l2_rect rect = {
-		.left	= icd->rect_current.left,
-		.top	= icd->rect_current.top,
-		.width	= f->fmt.pix.width,
-		.height	= f->fmt.pix.height,
-	};
+	struct v4l2_rect rect = mt9t031->rect;
 
 	/*
-	 * try_fmt has put rectangle within limits.
-	 * S_FMT - use binning and skipping for scaling, recalculate
-	 * limits, used for cropping
+	 * try_fmt has put width and height within limits.
+	 * S_FMT: use binning and skipping for scaling
 	 */
-	/* Is this more optimal than just a division? */
-	for (xskip = 8; xskip > 1; xskip--)
-		if (rect.width * xskip <= MT9T031_MAX_WIDTH)
-			break;
-
-	for (yskip = 8; yskip > 1; yskip--)
-		if (rect.height * yskip <= MT9T031_MAX_HEIGHT)
-			break;
-
-	recalculate_limits(icd, xskip, yskip);
-
-	ret = mt9t031_set_params(icd, &rect, xskip, yskip);
-	if (!ret) {
-		mt9t031->xskip = xskip;
-		mt9t031->yskip = yskip;
-	}
+	xskip = mt9t031_skip(&rect.width, pix->width, MT9T031_MAX_WIDTH);
+	yskip = mt9t031_skip(&rect.height, pix->height, MT9T031_MAX_HEIGHT);
 
-	return ret;
+	/* mt9t031_set_params() doesn't change width and height */
+	return mt9t031_set_params(icd, &rect, xskip, yskip);
 }
 
+/*
+ * If a user window larger than sensor window is requested, we'll increase the
+ * sensor window.
+ */
 static int mt9t031_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
 {
 	struct v4l2_pix_format *pix = &f->fmt.pix;
@@ -620,12 +665,12 @@ static int mt9t031_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 		if (ctrl->value) {
 			const u16 vblank = MT9T031_VERTICAL_BLANK;
 			const u32 shutter_max = MT9T031_MAX_HEIGHT + vblank;
-			if (set_shutter(client, icd->rect_current.height +
+			if (set_shutter(client, mt9t031->rect.height +
 					icd->y_skip_top + vblank) < 0)
 				return -EIO;
 			qctrl = soc_camera_find_qctrl(icd->ops, V4L2_CID_EXPOSURE);
 			icd->exposure = (shutter_max / 2 +
-					 (icd->rect_current.height +
+					 (mt9t031->rect.height +
 					  icd->y_skip_top + vblank - 1) *
 					 (qctrl->maximum - qctrl->minimum)) /
 				shutter_max + qctrl->minimum;
@@ -645,12 +690,6 @@ static int mt9t031_video_probe(struct i2c_client *client)
 	struct mt9t031 *mt9t031 = to_mt9t031(client);
 	s32 data;
 
-	/* We must have a parent by now. And it cannot be a wrong one.
-	 * So this entire test is completely redundant. */
-	if (!icd->dev.parent ||
-	    to_soc_camera_host(icd->dev.parent)->nr != icd->iface)
-		return -ENODEV;
-
 	/* Enable the chip */
 	data = reg_write(client, MT9T031_CHIP_ENABLE, 1);
 	dev_dbg(&client->dev, "write: %d\n", data);
@@ -688,8 +727,11 @@ static struct v4l2_subdev_core_ops mt9t031_subdev_core_ops = {
 static struct v4l2_subdev_video_ops mt9t031_subdev_video_ops = {
 	.s_stream	= mt9t031_s_stream,
 	.s_fmt		= mt9t031_s_fmt,
+	.g_fmt		= mt9t031_g_fmt,
 	.try_fmt	= mt9t031_try_fmt,
 	.s_crop		= mt9t031_s_crop,
+	.g_crop		= mt9t031_g_crop,
+	.cropcap	= mt9t031_cropcap,
 };
 
 static struct v4l2_subdev_ops mt9t031_subdev_ops = {
@@ -731,15 +773,13 @@ static int mt9t031_probe(struct i2c_client *client,
 
 	/* Second stage probe - when a capture adapter is there */
 	icd->ops		= &mt9t031_ops;
-	icd->rect_max.left	= MT9T031_COLUMN_SKIP;
-	icd->rect_max.top	= MT9T031_ROW_SKIP;
-	icd->rect_current.left	= icd->rect_max.left;
-	icd->rect_current.top	= icd->rect_max.top;
-	icd->width_min		= MT9T031_MIN_WIDTH;
-	icd->rect_max.width	= MT9T031_MAX_WIDTH;
-	icd->height_min		= MT9T031_MIN_HEIGHT;
-	icd->rect_max.height	= MT9T031_MAX_HEIGHT;
 	icd->y_skip_top		= 0;
+
+	mt9t031->rect.left	= MT9T031_COLUMN_SKIP;
+	mt9t031->rect.top	= MT9T031_ROW_SKIP;
+	mt9t031->rect.width	= MT9T031_MAX_WIDTH;
+	mt9t031->rect.height	= MT9T031_MAX_HEIGHT;
+
 	/* Simulated autoexposure. If enabled, we calculate shutter width
 	 * ourselves in the driver based on vertical blanking and frame width */
 	mt9t031->autoexposure = 1;
diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c
index ab196542528..35ea0ddd071 100644
--- a/drivers/media/video/mt9v022.c
+++ b/drivers/media/video/mt9v022.c
@@ -55,6 +55,13 @@ MODULE_PARM_DESC(sensor_type, "Sensor type: \"colour\" or \"monochrome\"");
 /* Progressive scan, master, defaults */
 #define MT9V022_CHIP_CONTROL_DEFAULT	0x188
 
+#define MT9V022_MAX_WIDTH		752
+#define MT9V022_MAX_HEIGHT		480
+#define MT9V022_MIN_WIDTH		48
+#define MT9V022_MIN_HEIGHT		32
+#define MT9V022_COLUMN_SKIP		1
+#define MT9V022_ROW_SKIP		4
+
 static const struct soc_camera_data_format mt9v022_colour_formats[] = {
 	/* Order important: first natively supported,
 	 * second supported with a GPIO extender */
@@ -86,6 +93,8 @@ static const struct soc_camera_data_format mt9v022_monochrome_formats[] = {
 
 struct mt9v022 {
 	struct v4l2_subdev subdev;
+	struct v4l2_rect rect;	/* Sensor window */
+	__u32 fourcc;
 	int model;	/* V4L2_IDENT_MT9V022* codes from v4l2-chip-ident.h */
 	u16 chip_control;
 };
@@ -250,44 +259,101 @@ static unsigned long mt9v022_query_bus_param(struct soc_camera_device *icd)
 
 static int mt9v022_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 {
-	struct v4l2_rect *rect = &a->c;
 	struct i2c_client *client = sd->priv;
+	struct mt9v022 *mt9v022 = to_mt9v022(client);
+	struct v4l2_rect rect = a->c;
 	struct soc_camera_device *icd = client->dev.platform_data;
 	int ret;
 
+	/* Bayer format - even size lengths */
+	if (mt9v022->fourcc == V4L2_PIX_FMT_SBGGR8 ||
+	    mt9v022->fourcc == V4L2_PIX_FMT_SBGGR16) {
+		rect.width	= ALIGN(rect.width, 2);
+		rect.height	= ALIGN(rect.height, 2);
+		/* Let the user play with the starting pixel */
+	}
+
+	soc_camera_limit_side(&rect.left, &rect.width,
+		     MT9V022_COLUMN_SKIP, MT9V022_MIN_WIDTH, MT9V022_MAX_WIDTH);
+
+	soc_camera_limit_side(&rect.top, &rect.height,
+		     MT9V022_ROW_SKIP, MT9V022_MIN_HEIGHT, MT9V022_MAX_HEIGHT);
+
 	/* Like in example app. Contradicts the datasheet though */
 	ret = reg_read(client, MT9V022_AEC_AGC_ENABLE);
 	if (ret >= 0) {
 		if (ret & 1) /* Autoexposure */
 			ret = reg_write(client, MT9V022_MAX_TOTAL_SHUTTER_WIDTH,
-					rect->height + icd->y_skip_top + 43);
+					rect.height + icd->y_skip_top + 43);
 		else
 			ret = reg_write(client, MT9V022_TOTAL_SHUTTER_WIDTH,
-					rect->height + icd->y_skip_top + 43);
+					rect.height + icd->y_skip_top + 43);
 	}
 	/* Setup frame format: defaults apart from width and height */
 	if (!ret)
-		ret = reg_write(client, MT9V022_COLUMN_START, rect->left);
+		ret = reg_write(client, MT9V022_COLUMN_START, rect.left);
 	if (!ret)
-		ret = reg_write(client, MT9V022_ROW_START, rect->top);
+		ret = reg_write(client, MT9V022_ROW_START, rect.top);
 	if (!ret)
 		/* Default 94, Phytec driver says:
 		 * "width + horizontal blank >= 660" */
 		ret = reg_write(client, MT9V022_HORIZONTAL_BLANKING,
-				rect->width > 660 - 43 ? 43 :
-				660 - rect->width);
+				rect.width > 660 - 43 ? 43 :
+				660 - rect.width);
 	if (!ret)
 		ret = reg_write(client, MT9V022_VERTICAL_BLANKING, 45);
 	if (!ret)
-		ret = reg_write(client, MT9V022_WINDOW_WIDTH, rect->width);
+		ret = reg_write(client, MT9V022_WINDOW_WIDTH, rect.width);
 	if (!ret)
 		ret = reg_write(client, MT9V022_WINDOW_HEIGHT,
-				rect->height + icd->y_skip_top);
+				rect.height + icd->y_skip_top);
 
 	if (ret < 0)
 		return ret;
 
-	dev_dbg(&client->dev, "Frame %ux%u pixel\n", rect->width, rect->height);
+	dev_dbg(&client->dev, "Frame %ux%u pixel\n", rect.width, rect.height);
+
+	mt9v022->rect = rect;
+
+	return 0;
+}
+
+static int mt9v022_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
+{
+	struct i2c_client *client = sd->priv;
+	struct mt9v022 *mt9v022 = to_mt9v022(client);
+
+	a->c	= mt9v022->rect;
+	a->type	= V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+	return 0;
+}
+
+static int mt9v022_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
+{
+	a->bounds.left			= MT9V022_COLUMN_SKIP;
+	a->bounds.top			= MT9V022_ROW_SKIP;
+	a->bounds.width			= MT9V022_MAX_WIDTH;
+	a->bounds.height		= MT9V022_MAX_HEIGHT;
+	a->defrect			= a->bounds;
+	a->type				= V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	a->pixelaspect.numerator	= 1;
+	a->pixelaspect.denominator	= 1;
+
+	return 0;
+}
+
+static int mt9v022_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
+{
+	struct i2c_client *client = sd->priv;
+	struct mt9v022 *mt9v022 = to_mt9v022(client);
+	struct v4l2_pix_format *pix = &f->fmt.pix;
+
+	pix->width		= mt9v022->rect.width;
+	pix->height		= mt9v022->rect.height;
+	pix->pixelformat	= mt9v022->fourcc;
+	pix->field		= V4L2_FIELD_NONE;
+	pix->colorspace		= V4L2_COLORSPACE_SRGB;
 
 	return 0;
 }
@@ -296,16 +362,16 @@ static int mt9v022_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
 {
 	struct i2c_client *client = sd->priv;
 	struct mt9v022 *mt9v022 = to_mt9v022(client);
-	struct soc_camera_device *icd = client->dev.platform_data;
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 	struct v4l2_crop a = {
 		.c = {
-			.left	= icd->rect_current.left,
-			.top	= icd->rect_current.top,
+			.left	= mt9v022->rect.left,
+			.top	= mt9v022->rect.top,
 			.width	= pix->width,
 			.height	= pix->height,
 		},
 	};
+	int ret;
 
 	/* The caller provides a supported format, as verified per call to
 	 * icd->try_fmt(), datawidth is from our supported format list */
@@ -328,7 +394,14 @@ static int mt9v022_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
 	}
 
 	/* No support for scaling on this camera, just crop. */
-	return mt9v022_s_crop(sd, &a);
+	ret = mt9v022_s_crop(sd, &a);
+	if (!ret) {
+		pix->width = mt9v022->rect.width;
+		pix->height = mt9v022->rect.height;
+		mt9v022->fourcc = pix->pixelformat;
+	}
+
+	return ret;
 }
 
 static int mt9v022_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
@@ -336,10 +409,13 @@ static int mt9v022_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
 	struct i2c_client *client = sd->priv;
 	struct soc_camera_device *icd = client->dev.platform_data;
 	struct v4l2_pix_format *pix = &f->fmt.pix;
+	int align = pix->pixelformat == V4L2_PIX_FMT_SBGGR8 ||
+		pix->pixelformat == V4L2_PIX_FMT_SBGGR16;
 
-	v4l_bound_align_image(&pix->width, 48, 752, 2 /* ? */,
-			      &pix->height, 32 + icd->y_skip_top,
-			      480 + icd->y_skip_top, 0, 0);
+	v4l_bound_align_image(&pix->width, MT9V022_MIN_WIDTH,
+		MT9V022_MAX_WIDTH, align,
+		&pix->height, MT9V022_MIN_HEIGHT + icd->y_skip_top,
+		MT9V022_MAX_HEIGHT + icd->y_skip_top, align, 0);
 
 	return 0;
 }
@@ -669,6 +745,8 @@ static int mt9v022_video_probe(struct soc_camera_device *icd,
 	if (flags & SOCAM_DATAWIDTH_8)
 		icd->num_formats++;
 
+	mt9v022->fourcc = icd->formats->fourcc;
+
 	dev_info(&client->dev, "Detected a MT9V022 chip ID %x, %s sensor\n",
 		 data, mt9v022->model == V4L2_IDENT_MT9V022IX7ATM ?
 		 "monochrome" : "colour");
@@ -679,10 +757,9 @@ ei2c:
 
 static void mt9v022_video_remove(struct soc_camera_device *icd)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 	struct soc_camera_link *icl = to_soc_camera_link(icd);
 
-	dev_dbg(&client->dev, "Video %x removed: %p, %p\n", client->addr,
+	dev_dbg(&icd->dev, "Video removed: %p, %p\n",
 		icd->dev.parent, icd->vdev);
 	if (icl->free_bus)
 		icl->free_bus(icl);
@@ -701,8 +778,11 @@ static struct v4l2_subdev_core_ops mt9v022_subdev_core_ops = {
 static struct v4l2_subdev_video_ops mt9v022_subdev_video_ops = {
 	.s_stream	= mt9v022_s_stream,
 	.s_fmt		= mt9v022_s_fmt,
+	.g_fmt		= mt9v022_g_fmt,
 	.try_fmt	= mt9v022_try_fmt,
 	.s_crop		= mt9v022_s_crop,
+	.g_crop		= mt9v022_g_crop,
+	.cropcap	= mt9v022_cropcap,
 };
 
 static struct v4l2_subdev_ops mt9v022_subdev_ops = {
@@ -745,16 +825,13 @@ static int mt9v022_probe(struct i2c_client *client,
 	mt9v022->chip_control = MT9V022_CHIP_CONTROL_DEFAULT;
 
 	icd->ops		= &mt9v022_ops;
-	icd->rect_max.left	= 1;
-	icd->rect_max.top	= 4;
-	icd->rect_max.width	= 752;
-	icd->rect_max.height	= 480;
-	icd->rect_current.left	= 1;
-	icd->rect_current.top	= 4;
-	icd->width_min		= 48;
-	icd->height_min		= 32;
 	icd->y_skip_top		= 1;
 
+	mt9v022->rect.left	= MT9V022_COLUMN_SKIP;
+	mt9v022->rect.top	= MT9V022_ROW_SKIP;
+	mt9v022->rect.width	= MT9V022_MAX_WIDTH;
+	mt9v022->rect.height	= MT9V022_MAX_HEIGHT;
+
 	ret = mt9v022_video_probe(icd, client);
 	if (ret) {
 		icd->ops = NULL;
diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c
index 1f1324a1d49..3875483ab9d 100644
--- a/drivers/media/video/mx1_camera.c
+++ b/drivers/media/video/mx1_camera.c
@@ -126,7 +126,7 @@ static int mx1_videobuf_setup(struct videobuf_queue *vq, unsigned int *count,
 {
 	struct soc_camera_device *icd = vq->priv_data;
 
-	*size = icd->rect_current.width * icd->rect_current.height *
+	*size = icd->user_width * icd->user_height *
 		((icd->current_fmt->depth + 7) >> 3);
 
 	if (!*count)
@@ -178,12 +178,12 @@ static int mx1_videobuf_prepare(struct videobuf_queue *vq,
 	buf->inwork = 1;
 
 	if (buf->fmt	!= icd->current_fmt ||
-	    vb->width	!= icd->rect_current.width ||
-	    vb->height	!= icd->rect_current.height ||
+	    vb->width	!= icd->user_width ||
+	    vb->height	!= icd->user_height ||
 	    vb->field	!= field) {
 		buf->fmt	= icd->current_fmt;
-		vb->width	= icd->rect_current.width;
-		vb->height	= icd->rect_current.height;
+		vb->width	= icd->user_width;
+		vb->height	= icd->user_height;
 		vb->field	= field;
 		vb->state	= VIDEOBUF_NEEDS_INIT;
 	}
diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c
index d5b51e9900b..dff2e5e2d8c 100644
--- a/drivers/media/video/mx3_camera.c
+++ b/drivers/media/video/mx3_camera.c
@@ -220,7 +220,7 @@ static int mx3_videobuf_setup(struct videobuf_queue *vq, unsigned int *count,
 	if (!mx3_cam->idmac_channel[0])
 		return -EINVAL;
 
-	*size = icd->rect_current.width * icd->rect_current.height * bpp;
+	*size = icd->user_width * icd->user_height * bpp;
 
 	if (!*count)
 		*count = 32;
@@ -241,7 +241,7 @@ static int mx3_videobuf_prepare(struct videobuf_queue *vq,
 	struct mx3_camera_buffer *buf =
 		container_of(vb, struct mx3_camera_buffer, vb);
 	/* current_fmt _must_ always be set */
-	size_t new_size = icd->rect_current.width * icd->rect_current.height *
+	size_t new_size = icd->user_width * icd->user_height *
 		((icd->current_fmt->depth + 7) >> 3);
 	int ret;
 
@@ -251,12 +251,12 @@ static int mx3_videobuf_prepare(struct videobuf_queue *vq,
 	 */
 
 	if (buf->fmt	!= icd->current_fmt ||
-	    vb->width	!= icd->rect_current.width ||
-	    vb->height	!= icd->rect_current.height ||
+	    vb->width	!= icd->user_width ||
+	    vb->height	!= icd->user_height ||
 	    vb->field	!= field) {
 		buf->fmt	= icd->current_fmt;
-		vb->width	= icd->rect_current.width;
-		vb->height	= icd->rect_current.height;
+		vb->width	= icd->user_width;
+		vb->height	= icd->user_height;
 		vb->field	= field;
 		if (vb->state != VIDEOBUF_NEEDS_INIT)
 			free_buffer(vq, buf);
@@ -354,9 +354,9 @@ static void mx3_videobuf_queue(struct videobuf_queue *vq,
 
 	/* This is the configuration of one sg-element */
 	video->out_pixel_fmt	= fourcc_to_ipu_pix(data_fmt->fourcc);
-	video->out_width	= icd->rect_current.width;
-	video->out_height	= icd->rect_current.height;
-	video->out_stride	= icd->rect_current.width;
+	video->out_width	= icd->user_width;
+	video->out_height	= icd->user_height;
+	video->out_stride	= icd->user_width;
 
 #ifdef DEBUG
 	/* helps to see what DMA actually has written */
@@ -541,7 +541,7 @@ static bool channel_change_requested(struct soc_camera_device *icd,
 
 	/* Do buffers have to be re-allocated or channel re-configured? */
 	return ichan && rect->width * rect->height >
-		icd->rect_current.width * icd->rect_current.height;
+		icd->user_width * icd->user_height;
 }
 
 static int test_platform_param(struct mx3_camera_dev *mx3_cam,
@@ -589,8 +589,8 @@ static int test_platform_param(struct mx3_camera_dev *mx3_cam,
 		*flags |= SOCAM_DATAWIDTH_4;
 		break;
 	default:
-		dev_info(mx3_cam->soc_host.v4l2_dev.dev, "Unsupported bus width %d\n",
-			 buswidth);
+		dev_warn(mx3_cam->soc_host.v4l2_dev.dev,
+			 "Unsupported bus width %d\n", buswidth);
 		return -EINVAL;
 	}
 
@@ -605,8 +605,7 @@ static int mx3_camera_try_bus_param(struct soc_camera_device *icd,
 	unsigned long bus_flags, camera_flags;
 	int ret = test_platform_param(mx3_cam, depth, &bus_flags);
 
-	dev_dbg(icd->dev.parent, "requested bus width %d bit: %d\n",
-		depth, ret);
+	dev_dbg(icd->dev.parent, "request bus width %d bit: %d\n", depth, ret);
 
 	if (ret < 0)
 		return ret;
@@ -727,13 +726,13 @@ passthrough:
 }
 
 static void configure_geometry(struct mx3_camera_dev *mx3_cam,
-			       struct v4l2_rect *rect)
+			       unsigned int width, unsigned int height)
 {
 	u32 ctrl, width_field, height_field;
 
 	/* Setup frame size - this cannot be changed on-the-fly... */
-	width_field = rect->width - 1;
-	height_field = rect->height - 1;
+	width_field = width - 1;
+	height_field = height - 1;
 	csi_reg_write(mx3_cam, width_field | (height_field << 16), CSI_SENS_FRM_SIZE);
 
 	csi_reg_write(mx3_cam, width_field << 16, CSI_FLASH_STROBE_1);
@@ -745,11 +744,6 @@ static void configure_geometry(struct mx3_camera_dev *mx3_cam,
 	ctrl = csi_reg_read(mx3_cam, CSI_OUT_FRM_CTRL) & 0xffff0000;
 	/* Sensor does the cropping */
 	csi_reg_write(mx3_cam, ctrl | 0 | (0 << 8), CSI_OUT_FRM_CTRL);
-
-	/*
-	 * No need to free resources here if we fail, we'll see if we need to
-	 * do this next time we are called
-	 */
 }
 
 static int acquire_dma_channel(struct mx3_camera_dev *mx3_cam)
@@ -786,6 +780,22 @@ static int acquire_dma_channel(struct mx3_camera_dev *mx3_cam)
 	return 0;
 }
 
+/*
+ * FIXME: learn to use stride != width, then we can keep stride properly aligned
+ * and support arbitrary (even) widths.
+ */
+static inline void stride_align(__s32 *width)
+{
+	if (((*width + 7) &  ~7) < 4096)
+		*width = (*width + 7) &  ~7;
+	else
+		*width = *width &  ~7;
+}
+
+/*
+ * As long as we don't implement host-side cropping and scaling, we can use
+ * default g_crop and cropcap from soc_camera.c
+ */
 static int mx3_camera_set_crop(struct soc_camera_device *icd,
 			       struct v4l2_crop *a)
 {
@@ -793,20 +803,51 @@ static int mx3_camera_set_crop(struct soc_camera_device *icd,
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	struct mx3_camera_dev *mx3_cam = ici->priv;
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+	struct v4l2_format f = {.type = V4L2_BUF_TYPE_VIDEO_CAPTURE};
+	struct v4l2_pix_format *pix = &f.fmt.pix;
+	int ret;
 
-	/*
-	 * We now know pixel formats and can decide upon DMA-channel(s)
-	 * So far only direct camera-to-memory is supported
-	 */
-	if (channel_change_requested(icd, rect)) {
-		int ret = acquire_dma_channel(mx3_cam);
+	soc_camera_limit_side(&rect->left, &rect->width, 0, 2, 4096);
+	soc_camera_limit_side(&rect->top, &rect->height, 0, 2, 4096);
+
+	ret = v4l2_subdev_call(sd, video, s_crop, a);
+	if (ret < 0)
+		return ret;
+
+	/* The capture device might have changed its output  */
+	ret = v4l2_subdev_call(sd, video, g_fmt, &f);
+	if (ret < 0)
+		return ret;
+
+	if (pix->width & 7) {
+		/* Ouch! We can only handle 8-byte aligned width... */
+		stride_align(&pix->width);
+		ret = v4l2_subdev_call(sd, video, s_fmt, &f);
 		if (ret < 0)
 			return ret;
 	}
 
-	configure_geometry(mx3_cam, rect);
+	if (pix->width != icd->user_width || pix->height != icd->user_height) {
+		/*
+		 * We now know pixel formats and can decide upon DMA-channel(s)
+		 * So far only direct camera-to-memory is supported
+		 */
+		if (channel_change_requested(icd, rect)) {
+			int ret = acquire_dma_channel(mx3_cam);
+			if (ret < 0)
+				return ret;
+		}
 
-	return v4l2_subdev_call(sd, video, s_crop, a);
+		configure_geometry(mx3_cam, pix->width, pix->height);
+	}
+
+	dev_dbg(icd->dev.parent, "Sensor cropped %dx%d\n",
+		pix->width, pix->height);
+
+	icd->user_width = pix->width;
+	icd->user_height = pix->height;
+
+	return ret;
 }
 
 static int mx3_camera_set_fmt(struct soc_camera_device *icd,
@@ -817,12 +858,6 @@ static int mx3_camera_set_fmt(struct soc_camera_device *icd,
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	const struct soc_camera_format_xlate *xlate;
 	struct v4l2_pix_format *pix = &f->fmt.pix;
-	struct v4l2_rect rect = {
-		.left	= icd->rect_current.left,
-		.top	= icd->rect_current.top,
-		.width	= pix->width,
-		.height	= pix->height,
-	};
 	int ret;
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
@@ -832,6 +867,9 @@ static int mx3_camera_set_fmt(struct soc_camera_device *icd,
 		return -EINVAL;
 	}
 
+	stride_align(&pix->width);
+	dev_dbg(icd->dev.parent, "Set format %dx%d\n", pix->width, pix->height);
+
 	ret = acquire_dma_channel(mx3_cam);
 	if (ret < 0)
 		return ret;
@@ -842,7 +880,7 @@ static int mx3_camera_set_fmt(struct soc_camera_device *icd,
 	 * mxc_v4l2_s_fmt()
 	 */
 
-	configure_geometry(mx3_cam, &rect);
+	configure_geometry(mx3_cam, pix->width, pix->height);
 
 	ret = v4l2_subdev_call(sd, video, s_fmt, f);
 	if (!ret) {
@@ -850,6 +888,8 @@ static int mx3_camera_set_fmt(struct soc_camera_device *icd,
 		icd->current_fmt = xlate->host_fmt;
 	}
 
+	dev_dbg(icd->dev.parent, "Sensor set %dx%d\n", pix->width, pix->height);
+
 	return ret;
 }
 
diff --git a/drivers/media/video/ov772x.c b/drivers/media/video/ov772x.c
index bbf5331a2ea..776a91dcfbe 100644
--- a/drivers/media/video/ov772x.c
+++ b/drivers/media/video/ov772x.c
@@ -382,11 +382,10 @@ struct regval_list {
 };
 
 struct ov772x_color_format {
-	char                     *name;
-	__u32                     fourcc;
-	u8                        dsp3;
-	u8                        com3;
-	u8                        com7;
+	const struct soc_camera_data_format *format;
+	u8 dsp3;
+	u8 com3;
+	u8 com7;
 };
 
 struct ov772x_win_size {
@@ -481,43 +480,43 @@ static const struct soc_camera_data_format ov772x_fmt_lists[] = {
  */
 static const struct ov772x_color_format ov772x_cfmts[] = {
 	{
-		SETFOURCC(YUYV),
+		.format = &ov772x_fmt_lists[0],
 		.dsp3   = 0x0,
 		.com3   = SWAP_YUV,
 		.com7   = OFMT_YUV,
 	},
 	{
-		SETFOURCC(YVYU),
+		.format = &ov772x_fmt_lists[1],
 		.dsp3   = UV_ON,
 		.com3   = SWAP_YUV,
 		.com7   = OFMT_YUV,
 	},
 	{
-		SETFOURCC(UYVY),
+		.format = &ov772x_fmt_lists[2],
 		.dsp3   = 0x0,
 		.com3   = 0x0,
 		.com7   = OFMT_YUV,
 	},
 	{
-		SETFOURCC(RGB555),
+		.format = &ov772x_fmt_lists[3],
 		.dsp3   = 0x0,
 		.com3   = SWAP_RGB,
 		.com7   = FMT_RGB555 | OFMT_RGB,
 	},
 	{
-		SETFOURCC(RGB555X),
+		.format = &ov772x_fmt_lists[4],
 		.dsp3   = 0x0,
 		.com3   = 0x0,
 		.com7   = FMT_RGB555 | OFMT_RGB,
 	},
 	{
-		SETFOURCC(RGB565),
+		.format = &ov772x_fmt_lists[5],
 		.dsp3   = 0x0,
 		.com3   = SWAP_RGB,
 		.com7   = FMT_RGB565 | OFMT_RGB,
 	},
 	{
-		SETFOURCC(RGB565X),
+		.format = &ov772x_fmt_lists[6],
 		.dsp3   = 0x0,
 		.com3   = 0x0,
 		.com7   = FMT_RGB565 | OFMT_RGB,
@@ -648,8 +647,8 @@ static int ov772x_s_stream(struct v4l2_subdev *sd, int enable)
 
 	ov772x_mask_set(client, COM2, SOFT_SLEEP_MODE, 0);
 
-	dev_dbg(&client->dev,
-		"format %s, win %s\n", priv->fmt->name, priv->win->name);
+	dev_dbg(&client->dev, "format %s, win %s\n",
+		priv->fmt->format->name, priv->win->name);
 
 	return 0;
 }
@@ -818,7 +817,7 @@ static int ov772x_set_params(struct i2c_client *client,
 	 */
 	priv->fmt = NULL;
 	for (i = 0; i < ARRAY_SIZE(ov772x_cfmts); i++) {
-		if (pixfmt == ov772x_cfmts[i].fourcc) {
+		if (pixfmt == ov772x_cfmts[i].format->fourcc) {
 			priv->fmt = ov772x_cfmts + i;
 			break;
 		}
@@ -955,6 +954,56 @@ ov772x_set_fmt_error:
 	return ret;
 }
 
+static int ov772x_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
+{
+	a->c.left	= 0;
+	a->c.top	= 0;
+	a->c.width	= VGA_WIDTH;
+	a->c.height	= VGA_HEIGHT;
+	a->type		= V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+	return 0;
+}
+
+static int ov772x_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
+{
+	a->bounds.left			= 0;
+	a->bounds.top			= 0;
+	a->bounds.width			= VGA_WIDTH;
+	a->bounds.height		= VGA_HEIGHT;
+	a->defrect			= a->bounds;
+	a->type				= V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	a->pixelaspect.numerator	= 1;
+	a->pixelaspect.denominator	= 1;
+
+	return 0;
+}
+
+static int ov772x_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
+{
+	struct i2c_client *client = sd->priv;
+	struct ov772x_priv *priv = to_ov772x(client);
+	struct v4l2_pix_format *pix = &f->fmt.pix;
+
+	if (!priv->win || !priv->fmt) {
+		u32 width = VGA_WIDTH, height = VGA_HEIGHT;
+		int ret = ov772x_set_params(client, &width, &height,
+					    V4L2_PIX_FMT_YUYV);
+		if (ret < 0)
+			return ret;
+	}
+
+	f->type			= V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+	pix->width		= priv->win->width;
+	pix->height		= priv->win->height;
+	pix->pixelformat	= priv->fmt->format->fourcc;
+	pix->colorspace		= priv->fmt->format->colorspace;
+	pix->field		= V4L2_FIELD_NONE;
+
+	return 0;
+}
+
 static int ov772x_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
 {
 	struct i2c_client *client = sd->priv;
@@ -1060,8 +1109,11 @@ static struct v4l2_subdev_core_ops ov772x_subdev_core_ops = {
 
 static struct v4l2_subdev_video_ops ov772x_subdev_video_ops = {
 	.s_stream	= ov772x_s_stream,
+	.g_fmt		= ov772x_g_fmt,
 	.s_fmt		= ov772x_s_fmt,
 	.try_fmt	= ov772x_try_fmt,
+	.cropcap	= ov772x_cropcap,
+	.g_crop		= ov772x_g_crop,
 };
 
 static struct v4l2_subdev_ops ov772x_subdev_ops = {
@@ -1110,8 +1162,6 @@ static int ov772x_probe(struct i2c_client *client,
 	v4l2_i2c_subdev_init(&priv->subdev, client, &ov772x_subdev_ops);
 
 	icd->ops		= &ov772x_ops;
-	icd->rect_max.width	= MAX_WIDTH;
-	icd->rect_max.height	= MAX_HEIGHT;
 
 	ret = ov772x_video_probe(icd, client);
 	if (ret) {
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
index 1fd6ef392a5..a19bb76e175 100644
--- a/drivers/media/video/pxa_camera.c
+++ b/drivers/media/video/pxa_camera.c
@@ -225,6 +225,10 @@ struct pxa_camera_dev {
 	u32			save_cicr[5];
 };
 
+struct pxa_cam {
+	unsigned long flags;
+};
+
 static const char *pxa_cam_driver_description = "PXA_Camera";
 
 static unsigned int vid_limit = 16;	/* Video memory limit, in Mb */
@@ -239,7 +243,7 @@ static int pxa_videobuf_setup(struct videobuf_queue *vq, unsigned int *count,
 
 	dev_dbg(icd->dev.parent, "count=%d, size=%d\n", *count, *size);
 
-	*size = roundup(icd->rect_current.width * icd->rect_current.height *
+	*size = roundup(icd->user_width * icd->user_height *
 			((icd->current_fmt->depth + 7) >> 3), 8);
 
 	if (0 == *count)
@@ -443,12 +447,12 @@ static int pxa_videobuf_prepare(struct videobuf_queue *vq,
 	buf->inwork = 1;
 
 	if (buf->fmt	!= icd->current_fmt ||
-	    vb->width	!= icd->rect_current.width ||
-	    vb->height	!= icd->rect_current.height ||
+	    vb->width	!= icd->user_width ||
+	    vb->height	!= icd->user_height ||
 	    vb->field	!= field) {
 		buf->fmt	= icd->current_fmt;
-		vb->width	= icd->rect_current.width;
-		vb->height	= icd->rect_current.height;
+		vb->width	= icd->user_width;
+		vb->height	= icd->user_height;
 		vb->field	= field;
 		vb->state	= VIDEOBUF_NEEDS_INIT;
 	}
@@ -839,7 +843,7 @@ static u32 mclk_get_divisor(struct platform_device *pdev,
 			    struct pxa_camera_dev *pcdev)
 {
 	unsigned long mclk = pcdev->mclk;
-	struct device *dev = pcdev->soc_host.v4l2_dev.dev;
+	struct device *dev = &pdev->dev;
 	u32 div;
 	unsigned long lcdclk;
 
@@ -1040,57 +1044,17 @@ static int test_platform_param(struct pxa_camera_dev *pcdev,
 	return 0;
 }
 
-static int pxa_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
+static void pxa_camera_setup_cicr(struct soc_camera_device *icd,
+				  unsigned long flags, __u32 pixfmt)
 {
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	struct pxa_camera_dev *pcdev = ici->priv;
-	unsigned long dw, bpp, bus_flags, camera_flags, common_flags;
+	unsigned long dw, bpp;
 	u32 cicr0, cicr1, cicr2, cicr3, cicr4 = 0;
-	int ret = test_platform_param(pcdev, icd->buswidth, &bus_flags);
-
-	if (ret < 0)
-		return ret;
-
-	camera_flags = icd->ops->query_bus_param(icd);
-
-	common_flags = soc_camera_bus_param_compatible(camera_flags, bus_flags);
-	if (!common_flags)
-		return -EINVAL;
-
-	pcdev->channels = 1;
-
-	/* Make choises, based on platform preferences */
-	if ((common_flags & SOCAM_HSYNC_ACTIVE_HIGH) &&
-	    (common_flags & SOCAM_HSYNC_ACTIVE_LOW)) {
-		if (pcdev->platform_flags & PXA_CAMERA_HSP)
-			common_flags &= ~SOCAM_HSYNC_ACTIVE_HIGH;
-		else
-			common_flags &= ~SOCAM_HSYNC_ACTIVE_LOW;
-	}
-
-	if ((common_flags & SOCAM_VSYNC_ACTIVE_HIGH) &&
-	    (common_flags & SOCAM_VSYNC_ACTIVE_LOW)) {
-		if (pcdev->platform_flags & PXA_CAMERA_VSP)
-			common_flags &= ~SOCAM_VSYNC_ACTIVE_HIGH;
-		else
-			common_flags &= ~SOCAM_VSYNC_ACTIVE_LOW;
-	}
-
-	if ((common_flags & SOCAM_PCLK_SAMPLE_RISING) &&
-	    (common_flags & SOCAM_PCLK_SAMPLE_FALLING)) {
-		if (pcdev->platform_flags & PXA_CAMERA_PCP)
-			common_flags &= ~SOCAM_PCLK_SAMPLE_RISING;
-		else
-			common_flags &= ~SOCAM_PCLK_SAMPLE_FALLING;
-	}
-
-	ret = icd->ops->set_bus_param(icd, common_flags);
-	if (ret < 0)
-		return ret;
 
 	/* Datawidth is now guaranteed to be equal to one of the three values.
 	 * We fix bit-per-pixel equal to data-width... */
-	switch (common_flags & SOCAM_DATAWIDTH_MASK) {
+	switch (flags & SOCAM_DATAWIDTH_MASK) {
 	case SOCAM_DATAWIDTH_10:
 		dw = 4;
 		bpp = 0x40;
@@ -1111,18 +1075,18 @@ static int pxa_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
 		cicr4 |= CICR4_PCLK_EN;
 	if (pcdev->platform_flags & PXA_CAMERA_MCLK_EN)
 		cicr4 |= CICR4_MCLK_EN;
-	if (common_flags & SOCAM_PCLK_SAMPLE_FALLING)
+	if (flags & SOCAM_PCLK_SAMPLE_FALLING)
 		cicr4 |= CICR4_PCP;
-	if (common_flags & SOCAM_HSYNC_ACTIVE_LOW)
+	if (flags & SOCAM_HSYNC_ACTIVE_LOW)
 		cicr4 |= CICR4_HSP;
-	if (common_flags & SOCAM_VSYNC_ACTIVE_LOW)
+	if (flags & SOCAM_VSYNC_ACTIVE_LOW)
 		cicr4 |= CICR4_VSP;
 
 	cicr0 = __raw_readl(pcdev->base + CICR0);
 	if (cicr0 & CICR0_ENB)
 		__raw_writel(cicr0 & ~CICR0_ENB, pcdev->base + CICR0);
 
-	cicr1 = CICR1_PPL_VAL(icd->rect_current.width - 1) | bpp | dw;
+	cicr1 = CICR1_PPL_VAL(icd->user_width - 1) | bpp | dw;
 
 	switch (pixfmt) {
 	case V4L2_PIX_FMT_YUV422P:
@@ -1151,7 +1115,7 @@ static int pxa_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
 	}
 
 	cicr2 = 0;
-	cicr3 = CICR3_LPF_VAL(icd->rect_current.height - 1) |
+	cicr3 = CICR3_LPF_VAL(icd->user_height - 1) |
 		CICR3_BFW_VAL(min((unsigned short)255, icd->y_skip_top));
 	cicr4 |= pcdev->mclk_divisor;
 
@@ -1165,6 +1129,59 @@ static int pxa_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
 		CICR0_SIM_MP : (CICR0_SL_CAP_EN | CICR0_SIM_SP));
 	cicr0 |= CICR0_DMAEN | CICR0_IRQ_MASK;
 	__raw_writel(cicr0, pcdev->base + CICR0);
+}
+
+static int pxa_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
+{
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct pxa_camera_dev *pcdev = ici->priv;
+	unsigned long bus_flags, camera_flags, common_flags;
+	int ret = test_platform_param(pcdev, icd->buswidth, &bus_flags);
+	struct pxa_cam *cam = icd->host_priv;
+
+	if (ret < 0)
+		return ret;
+
+	camera_flags = icd->ops->query_bus_param(icd);
+
+	common_flags = soc_camera_bus_param_compatible(camera_flags, bus_flags);
+	if (!common_flags)
+		return -EINVAL;
+
+	pcdev->channels = 1;
+
+	/* Make choises, based on platform preferences */
+	if ((common_flags & SOCAM_HSYNC_ACTIVE_HIGH) &&
+	    (common_flags & SOCAM_HSYNC_ACTIVE_LOW)) {
+		if (pcdev->platform_flags & PXA_CAMERA_HSP)
+			common_flags &= ~SOCAM_HSYNC_ACTIVE_HIGH;
+		else
+			common_flags &= ~SOCAM_HSYNC_ACTIVE_LOW;
+	}
+
+	if ((common_flags & SOCAM_VSYNC_ACTIVE_HIGH) &&
+	    (common_flags & SOCAM_VSYNC_ACTIVE_LOW)) {
+		if (pcdev->platform_flags & PXA_CAMERA_VSP)
+			common_flags &= ~SOCAM_VSYNC_ACTIVE_HIGH;
+		else
+			common_flags &= ~SOCAM_VSYNC_ACTIVE_LOW;
+	}
+
+	if ((common_flags & SOCAM_PCLK_SAMPLE_RISING) &&
+	    (common_flags & SOCAM_PCLK_SAMPLE_FALLING)) {
+		if (pcdev->platform_flags & PXA_CAMERA_PCP)
+			common_flags &= ~SOCAM_PCLK_SAMPLE_RISING;
+		else
+			common_flags &= ~SOCAM_PCLK_SAMPLE_FALLING;
+	}
+
+	cam->flags = common_flags;
+
+	ret = icd->ops->set_bus_param(icd, common_flags);
+	if (ret < 0)
+		return ret;
+
+	pxa_camera_setup_cicr(icd, common_flags, pixfmt);
 
 	return 0;
 }
@@ -1230,6 +1247,7 @@ static int pxa_camera_get_formats(struct soc_camera_device *icd, int idx,
 {
 	struct device *dev = icd->dev.parent;
 	int formats = 0, buswidth, ret;
+	struct pxa_cam *cam;
 
 	buswidth = required_buswidth(icd->formats + idx);
 
@@ -1240,6 +1258,16 @@ static int pxa_camera_get_formats(struct soc_camera_device *icd, int idx,
 	if (ret < 0)
 		return 0;
 
+	if (!icd->host_priv) {
+		cam = kzalloc(sizeof(*cam), GFP_KERNEL);
+		if (!cam)
+			return -ENOMEM;
+
+		icd->host_priv = cam;
+	} else {
+		cam = icd->host_priv;
+	}
+
 	switch (icd->formats[idx].fourcc) {
 	case V4L2_PIX_FMT_UYVY:
 		formats++;
@@ -1284,6 +1312,19 @@ static int pxa_camera_get_formats(struct soc_camera_device *icd, int idx,
 	return formats;
 }
 
+static void pxa_camera_put_formats(struct soc_camera_device *icd)
+{
+	kfree(icd->host_priv);
+	icd->host_priv = NULL;
+}
+
+static int pxa_camera_check_frame(struct v4l2_pix_format *pix)
+{
+	/* limit to pxa hardware capabilities */
+	return pix->height < 32 || pix->height > 2048 || pix->width < 48 ||
+		pix->width > 2048 || (pix->width & 0x01);
+}
+
 static int pxa_camera_set_crop(struct soc_camera_device *icd,
 			       struct v4l2_crop *a)
 {
@@ -1296,6 +1337,9 @@ static int pxa_camera_set_crop(struct soc_camera_device *icd,
 		.master_clock = pcdev->mclk,
 		.pixel_clock_max = pcdev->ciclk / 4,
 	};
+	struct v4l2_format f;
+	struct v4l2_pix_format *pix = &f.fmt.pix, pix_tmp;
+	struct pxa_cam *cam = icd->host_priv;
 	int ret;
 
 	/* If PCLK is used to latch data from the sensor, check sense */
@@ -1309,7 +1353,37 @@ static int pxa_camera_set_crop(struct soc_camera_device *icd,
 	if (ret < 0) {
 		dev_warn(dev, "Failed to crop to %ux%u@%u:%u\n",
 			 rect->width, rect->height, rect->left, rect->top);
-	} else if (sense.flags & SOCAM_SENSE_PCLK_CHANGED) {
+		return ret;
+	}
+
+	f.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+	ret = v4l2_subdev_call(sd, video, g_fmt, &f);
+	if (ret < 0)
+		return ret;
+
+	pix_tmp = *pix;
+	if (pxa_camera_check_frame(pix)) {
+		/*
+		 * Camera cropping produced a frame beyond our capabilities.
+		 * FIXME: just extract a subframe, that we can process.
+		 */
+		v4l_bound_align_image(&pix->width, 48, 2048, 1,
+			&pix->height, 32, 2048, 0,
+			icd->current_fmt->fourcc == V4L2_PIX_FMT_YUV422P ?
+				4 : 0);
+		ret = v4l2_subdev_call(sd, video, s_fmt, &f);
+		if (ret < 0)
+			return ret;
+
+		if (pxa_camera_check_frame(pix)) {
+			dev_warn(icd->dev.parent,
+				 "Inconsistent state. Use S_FMT to repair\n");
+			return -EINVAL;
+		}
+	}
+
+	if (sense.flags & SOCAM_SENSE_PCLK_CHANGED) {
 		if (sense.pixel_clock > sense.pixel_clock_max) {
 			dev_err(dev,
 				"pixel clock %lu set by the camera too high!",
@@ -1319,6 +1393,11 @@ static int pxa_camera_set_crop(struct soc_camera_device *icd,
 		recalculate_fifo_timeout(pcdev, sense.pixel_clock);
 	}
 
+	icd->user_width = pix->width;
+	icd->user_height = pix->height;
+
+	pxa_camera_setup_cicr(icd, cam->flags, icd->current_fmt->fourcc);
+
 	return ret;
 }
 
@@ -1359,6 +1438,11 @@ static int pxa_camera_set_fmt(struct soc_camera_device *icd,
 	if (ret < 0) {
 		dev_warn(dev, "Failed to configure for format %x\n",
 			 pix->pixelformat);
+	} else if (pxa_camera_check_frame(pix)) {
+		dev_warn(dev,
+			 "Camera driver produced an unsupported frame %dx%d\n",
+			 pix->width, pix->height);
+		ret = -EINVAL;
 	} else if (sense.flags & SOCAM_SENSE_PCLK_CHANGED) {
 		if (sense.pixel_clock > sense.pixel_clock_max) {
 			dev_err(dev,
@@ -1402,7 +1486,7 @@ static int pxa_camera_try_fmt(struct soc_camera_device *icd,
 	 */
 	v4l_bound_align_image(&pix->width, 48, 2048, 1,
 			      &pix->height, 32, 2048, 0,
-			      xlate->host_fmt->fourcc == V4L2_PIX_FMT_YUV422P ? 4 : 0);
+			      pixfmt == V4L2_PIX_FMT_YUV422P ? 4 : 0);
 
 	pix->bytesperline = pix->width *
 		DIV_ROUND_UP(xlate->host_fmt->depth, 8);
@@ -1412,7 +1496,7 @@ static int pxa_camera_try_fmt(struct soc_camera_device *icd,
 	pix->pixelformat = xlate->cam_fmt->fourcc;
 	/* limit to sensor capabilities */
 	ret = v4l2_subdev_call(sd, video, try_fmt, f);
-	pix->pixelformat = xlate->host_fmt->fourcc;
+	pix->pixelformat = pixfmt;
 
 	field = pix->field;
 
@@ -1525,6 +1609,7 @@ static struct soc_camera_host_ops pxa_soc_camera_host_ops = {
 	.resume		= pxa_camera_resume,
 	.set_crop	= pxa_camera_set_crop,
 	.get_formats	= pxa_camera_get_formats,
+	.put_formats	= pxa_camera_put_formats,
 	.set_fmt	= pxa_camera_set_fmt,
 	.try_fmt	= pxa_camera_try_fmt,
 	.init_videobuf	= pxa_camera_init_videobuf,
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index 3457bababd3..5ab7c5aefd6 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -74,6 +74,13 @@
 #define CDBYR2 0x98 /* Capture data bottom-field address Y register 2 */
 #define CDBCR2 0x9c /* Capture data bottom-field address C register 2 */
 
+#undef DEBUG_GEOMETRY
+#ifdef DEBUG_GEOMETRY
+#define dev_geo	dev_info
+#else
+#define dev_geo	dev_dbg
+#endif
+
 /* per video frame buffer */
 struct sh_mobile_ceu_buffer {
 	struct videobuf_buffer vb; /* v4l buffer must be first */
@@ -103,8 +110,9 @@ struct sh_mobile_ceu_dev {
 };
 
 struct sh_mobile_ceu_cam {
-	struct v4l2_rect camera_rect;
-	struct v4l2_rect camera_max;
+	struct v4l2_rect ceu_rect;
+	unsigned int cam_width;
+	unsigned int cam_height;
 	const struct soc_camera_data_format *extra_fmt;
 	const struct soc_camera_data_format *camera_fmt;
 };
@@ -156,7 +164,7 @@ static int sh_mobile_ceu_videobuf_setup(struct videobuf_queue *vq,
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
 	int bytes_per_pixel = (icd->current_fmt->depth + 7) >> 3;
 
-	*size = PAGE_ALIGN(icd->rect_current.width * icd->rect_current.height *
+	*size = PAGE_ALIGN(icd->user_width * icd->user_height *
 			   bytes_per_pixel);
 
 	if (0 == *count)
@@ -176,8 +184,9 @@ static void free_buffer(struct videobuf_queue *vq,
 			struct sh_mobile_ceu_buffer *buf)
 {
 	struct soc_camera_device *icd = vq->priv_data;
+	struct device *dev = icd->dev.parent;
 
-	dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%08lx %zd\n", __func__,
+	dev_dbg(dev, "%s (vb=0x%p) 0x%08lx %zd\n", __func__,
 		&buf->vb, buf->vb.baddr, buf->vb.bsize);
 
 	if (in_interrupt())
@@ -185,7 +194,7 @@ static void free_buffer(struct videobuf_queue *vq,
 
 	videobuf_waiton(&buf->vb, 0, 0);
 	videobuf_dma_contig_free(vq, &buf->vb);
-	dev_dbg(icd->dev.parent, "%s freed\n", __func__);
+	dev_dbg(dev, "%s freed\n", __func__);
 	buf->vb.state = VIDEOBUF_NEEDS_INIT;
 }
 
@@ -216,7 +225,7 @@ static void sh_mobile_ceu_capture(struct sh_mobile_ceu_dev *pcdev)
 	phys_addr_top = videobuf_to_dma_contig(pcdev->active);
 	ceu_write(pcdev, CDAYR, phys_addr_top);
 	if (pcdev->is_interlaced) {
-		phys_addr_bottom = phys_addr_top + icd->rect_current.width;
+		phys_addr_bottom = phys_addr_top + icd->user_width;
 		ceu_write(pcdev, CDBYR, phys_addr_bottom);
 	}
 
@@ -225,12 +234,12 @@ static void sh_mobile_ceu_capture(struct sh_mobile_ceu_dev *pcdev)
 	case V4L2_PIX_FMT_NV21:
 	case V4L2_PIX_FMT_NV16:
 	case V4L2_PIX_FMT_NV61:
-		phys_addr_top += icd->rect_current.width *
-			icd->rect_current.height;
+		phys_addr_top += icd->user_width *
+			icd->user_height;
 		ceu_write(pcdev, CDACR, phys_addr_top);
 		if (pcdev->is_interlaced) {
 			phys_addr_bottom = phys_addr_top +
-				icd->rect_current.width;
+				icd->user_width;
 			ceu_write(pcdev, CDBCR, phys_addr_bottom);
 		}
 	}
@@ -264,12 +273,12 @@ static int sh_mobile_ceu_videobuf_prepare(struct videobuf_queue *vq,
 	BUG_ON(NULL == icd->current_fmt);
 
 	if (buf->fmt	!= icd->current_fmt ||
-	    vb->width	!= icd->rect_current.width ||
-	    vb->height	!= icd->rect_current.height ||
+	    vb->width	!= icd->user_width ||
+	    vb->height	!= icd->user_height ||
 	    vb->field	!= field) {
 		buf->fmt	= icd->current_fmt;
-		vb->width	= icd->rect_current.width;
-		vb->height	= icd->rect_current.height;
+		vb->width	= icd->user_width;
+		vb->height	= icd->user_height;
 		vb->field	= field;
 		vb->state	= VIDEOBUF_NEEDS_INIT;
 	}
@@ -451,18 +460,6 @@ static unsigned int size_dst(unsigned int src, unsigned int scale)
 		mant_pre * 4096 / scale + 1;
 }
 
-static unsigned int size_src(unsigned int dst, unsigned int scale)
-{
-	unsigned int mant_pre = scale >> 12, tmp;
-	if (!dst || !scale)
-		return dst;
-	for (tmp = ((dst - 1) * scale + 2048 * mant_pre) / 4096 + 1;
-	     size_dst(tmp, scale) < dst;
-	     tmp++)
-		;
-	return tmp;
-}
-
 static u16 calc_scale(unsigned int src, unsigned int *dst)
 {
 	u16 scale;
@@ -482,65 +479,46 @@ static u16 calc_scale(unsigned int src, unsigned int *dst)
 
 /* rect is guaranteed to not exceed the scaled camera rectangle */
 static void sh_mobile_ceu_set_rect(struct soc_camera_device *icd,
-				   struct v4l2_rect *rect)
+				   unsigned int out_width,
+				   unsigned int out_height)
 {
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	struct sh_mobile_ceu_cam *cam = icd->host_priv;
+	struct v4l2_rect *rect = &cam->ceu_rect;
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
-	int width, height, cfszr_width, cdwdr_width, in_width, in_height;
-	unsigned int left_offset, top_offset, left, top;
-	unsigned int hscale = pcdev->cflcr & 0xffff;
-	unsigned int vscale = (pcdev->cflcr >> 16) & 0xffff;
+	unsigned int height, width, cdwdr_width, in_width, in_height;
+	unsigned int left_offset, top_offset;
 	u32 camor;
 
-	/* Switch to the camera scale */
-	left = size_src(rect->left, hscale);
-	top = size_src(rect->top, vscale);
-
-	dev_dbg(icd->dev.parent, "Left %u * 0x%x = %u, top %u * 0x%x = %u\n",
-		rect->left, hscale, left, rect->top, vscale, top);
-
-	if (left > cam->camera_rect.left) {
-		left_offset = left - cam->camera_rect.left;
-	} else {
-		left_offset = 0;
-		left = cam->camera_rect.left;
-	}
-
-	if (top > cam->camera_rect.top) {
-		top_offset = top - cam->camera_rect.top;
-	} else {
-		top_offset = 0;
-		top = cam->camera_rect.top;
-	}
+	dev_dbg(icd->dev.parent, "Crop %ux%u@%u:%u\n",
+		rect->width, rect->height, rect->left, rect->top);
 
-	dev_dbg(icd->dev.parent, "New left %u, top %u, offsets %u:%u\n",
-		rect->left, rect->top, left_offset, top_offset);
+	left_offset	= rect->left;
+	top_offset	= rect->top;
 
 	if (pcdev->image_mode) {
-		width = rect->width;
-		in_width = cam->camera_rect.width;
+		in_width = rect->width;
 		if (!pcdev->is_16bit) {
-			width *= 2;
 			in_width *= 2;
 			left_offset *= 2;
 		}
-		cfszr_width = cdwdr_width = rect->width;
+		width = cdwdr_width = out_width;
 	} else {
 		unsigned int w_factor = (icd->current_fmt->depth + 7) >> 3;
+
+		width = out_width * w_factor / 2;
+
 		if (!pcdev->is_16bit)
 			w_factor *= 2;
 
-		width = rect->width * w_factor / 2;
-		in_width = cam->camera_rect.width * w_factor / 2;
+		in_width = rect->width * w_factor / 2;
 		left_offset = left_offset * w_factor / 2;
 
-		cfszr_width = pcdev->is_16bit ? width : width / 2;
-		cdwdr_width = pcdev->is_16bit ? width * 2 : width;
+		cdwdr_width = width * 2;
 	}
 
-	height = rect->height;
-	in_height = cam->camera_rect.height;
+	height = out_height;
+	in_height = rect->height;
 	if (pcdev->is_interlaced) {
 		height /= 2;
 		in_height /= 2;
@@ -548,10 +526,17 @@ static void sh_mobile_ceu_set_rect(struct soc_camera_device *icd,
 		cdwdr_width *= 2;
 	}
 
+	/* Set CAMOR, CAPWR, CFSZR, take care of CDWDR */
 	camor = left_offset | (top_offset << 16);
+
+	dev_geo(icd->dev.parent,
+		"CAMOR 0x%x, CAPWR 0x%x, CFSZR 0x%x, CDWDR 0x%x\n", camor,
+		(in_height << 16) | in_width, (height << 16) | width,
+		cdwdr_width);
+
 	ceu_write(pcdev, CAMOR, camor);
 	ceu_write(pcdev, CAPWR, (in_height << 16) | in_width);
-	ceu_write(pcdev, CFSZR, (height << 16) | cfszr_width);
+	ceu_write(pcdev, CFSZR, (height << 16) | width);
 	ceu_write(pcdev, CDWDR, cdwdr_width);
 }
 
@@ -663,8 +648,8 @@ static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd,
 	ceu_write(pcdev, CAPCR, 0x00300000);
 	ceu_write(pcdev, CAIFR, pcdev->is_interlaced ? 0x101 : 0);
 
+	sh_mobile_ceu_set_rect(icd, icd->user_width, icd->user_height);
 	mdelay(1);
-	sh_mobile_ceu_set_rect(icd, &icd->rect_current);
 
 	ceu_write(pcdev, CFLCR, pcdev->cflcr);
 
@@ -687,11 +672,10 @@ static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd,
 	ceu_write(pcdev, CDOCR, value);
 	ceu_write(pcdev, CFWCR, 0); /* keep "datafetch firewall" disabled */
 
-	dev_dbg(icd->dev.parent, "S_FMT successful for %c%c%c%c %ux%u@%u:%u\n",
+	dev_dbg(icd->dev.parent, "S_FMT successful for %c%c%c%c %ux%u\n",
 		pixfmt & 0xff, (pixfmt >> 8) & 0xff,
 		(pixfmt >> 16) & 0xff, (pixfmt >> 24) & 0xff,
-		icd->rect_current.width, icd->rect_current.height,
-		icd->rect_current.left, icd->rect_current.top);
+		icd->user_width, icd->user_height);
 
 	capture_restore(pcdev, capsr);
 
@@ -744,6 +728,7 @@ static const struct soc_camera_data_format sh_mobile_ceu_formats[] = {
 static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, int idx,
 				     struct soc_camera_format_xlate *xlate)
 {
+	struct device *dev = icd->dev.parent;
 	int ret, k, n;
 	int formats = 0;
 	struct sh_mobile_ceu_cam *cam;
@@ -758,7 +743,6 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, int idx,
 			return -ENOMEM;
 
 		icd->host_priv = cam;
-		cam->camera_max = icd->rect_max;
 	} else {
 		cam = icd->host_priv;
 	}
@@ -793,8 +777,7 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, int idx,
 			xlate->cam_fmt = icd->formats + idx;
 			xlate->buswidth = icd->formats[idx].depth;
 			xlate++;
-			dev_dbg(icd->dev.parent,
-				"Providing format %s using %s\n",
+			dev_dbg(dev, "Providing format %s using %s\n",
 				sh_mobile_ceu_formats[k].name,
 				icd->formats[idx].name);
 		}
@@ -807,7 +790,7 @@ add_single_format:
 			xlate->cam_fmt = icd->formats + idx;
 			xlate->buswidth = icd->formats[idx].depth;
 			xlate++;
-			dev_dbg(icd->dev.parent,
+			dev_dbg(dev,
 				"Providing format %s in pass-through mode\n",
 				icd->formats[idx].name);
 		}
@@ -836,176 +819,487 @@ static bool is_inside(struct v4l2_rect *r1, struct v4l2_rect *r2)
 		r1->top + r1->height < r2->top + r2->height;
 }
 
+static unsigned int scale_down(unsigned int size, unsigned int scale)
+{
+	return (size * 4096 + scale / 2) / scale;
+}
+
+static unsigned int scale_up(unsigned int size, unsigned int scale)
+{
+	return (size * scale + 2048) / 4096;
+}
+
+static unsigned int calc_generic_scale(unsigned int input, unsigned int output)
+{
+	return (input * 4096 + output / 2) / output;
+}
+
+static int client_g_rect(struct v4l2_subdev *sd, struct v4l2_rect *rect)
+{
+	struct v4l2_crop crop;
+	struct v4l2_cropcap cap;
+	int ret;
+
+	crop.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+	ret = v4l2_subdev_call(sd, video, g_crop, &crop);
+	if (!ret) {
+		*rect = crop.c;
+		return ret;
+	}
+
+	/* Camera driver doesn't support .g_crop(), assume default rectangle */
+	cap.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+	ret = v4l2_subdev_call(sd, video, cropcap, &cap);
+	if (ret < 0)
+		return ret;
+
+	*rect = cap.defrect;
+
+	return ret;
+}
+
 /*
- * CEU can scale and crop, but we don't want to waste bandwidth and kill the
- * framerate by always requesting the maximum image from the client. For
- * cropping we also have to take care of the current scale. The common for both
- * scaling and cropping approach is:
+ * The common for both scaling and cropping iterative approach is:
  * 1. try if the client can produce exactly what requested by the user
  * 2. if (1) failed, try to double the client image until we get one big enough
  * 3. if (2) failed, try to request the maximum image
  */
-static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd,
-				  struct v4l2_crop *a)
+static int client_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *crop,
+			 struct v4l2_crop *cam_crop)
 {
-	struct v4l2_rect *rect = &a->c;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
-	struct sh_mobile_ceu_dev *pcdev = ici->priv;
-	struct v4l2_crop cam_crop;
-	struct v4l2_rect *cam_rect = &cam_crop.c, target, cam_max;
-	struct sh_mobile_ceu_cam *cam = icd->host_priv;
-	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-	unsigned int hscale = pcdev->cflcr & 0xffff;
-	unsigned int vscale = (pcdev->cflcr >> 16) & 0xffff;
-	unsigned short width, height;
-	u32 capsr;
+	struct v4l2_rect *rect = &crop->c, *cam_rect = &cam_crop->c;
+	struct device *dev = sd->v4l2_dev->dev;
+	struct v4l2_cropcap cap;
 	int ret;
+	unsigned int width, height;
 
-	/* Scale back up into client units */
-	cam_rect->left	= size_src(rect->left, hscale);
-	cam_rect->width	= size_src(rect->width, hscale);
-	cam_rect->top	= size_src(rect->top, vscale);
-	cam_rect->height	= size_src(rect->height, vscale);
-
-	target = *cam_rect;
+	v4l2_subdev_call(sd, video, s_crop, crop);
+	ret = client_g_rect(sd, cam_rect);
+	if (ret < 0)
+		return ret;
 
-	capsr = capture_save_reset(pcdev);
-	dev_dbg(icd->dev.parent, "CAPSR 0x%x, CFLCR 0x%x\n",
-		capsr, pcdev->cflcr);
-
-	/* First attempt - see if the client can deliver a perfect result */
-	ret = v4l2_subdev_call(sd, video, s_crop, &cam_crop);
-	if (!ret && !memcmp(&target, &cam_rect, sizeof(target))) {
-		dev_dbg(icd->dev.parent,
-			"Camera S_CROP successful for %ux%u@%u:%u\n",
-			cam_rect->width, cam_rect->height,
-			cam_rect->left, cam_rect->top);
-		goto ceu_set_rect;
+	/*
+	 * Now cam_crop contains the current camera input rectangle, and it must
+	 * be within camera cropcap bounds
+	 */
+	if (!memcmp(rect, cam_rect, sizeof(*rect))) {
+		/* Even if camera S_CROP failed, but camera rectangle matches */
+		dev_dbg(dev, "Camera S_CROP successful for %ux%u@%u:%u\n",
+			rect->width, rect->height, rect->left, rect->top);
+		return 0;
 	}
 
-	/* Try to fix cropping, that camera hasn't managed to do */
-	dev_dbg(icd->dev.parent, "Fix camera S_CROP %d for %ux%u@%u:%u"
-		" to %ux%u@%u:%u\n",
-		ret, cam_rect->width, cam_rect->height,
+	/* Try to fix cropping, that camera hasn't managed to set */
+	dev_geo(dev, "Fix camera S_CROP for %ux%u@%u:%u to %ux%u@%u:%u\n",
+		cam_rect->width, cam_rect->height,
 		cam_rect->left, cam_rect->top,
-		target.width, target.height, target.left, target.top);
+		rect->width, rect->height, rect->left, rect->top);
+
+	/* We need sensor maximum rectangle */
+	ret = v4l2_subdev_call(sd, video, cropcap, &cap);
+	if (ret < 0)
+		return ret;
+
+	soc_camera_limit_side(&rect->left, &rect->width, cap.bounds.left, 2,
+			      cap.bounds.width);
+	soc_camera_limit_side(&rect->top, &rect->height, cap.bounds.top, 4,
+			      cap.bounds.height);
 
 	/*
 	 * Popular special case - some cameras can only handle fixed sizes like
 	 * QVGA, VGA,... Take care to avoid infinite loop.
 	 */
-	width = max(cam_rect->width, 1);
-	height = max(cam_rect->height, 1);
-	cam_max.width = size_src(icd->rect_max.width, hscale);
-	cam_max.left = size_src(icd->rect_max.left, hscale);
-	cam_max.height = size_src(icd->rect_max.height, vscale);
-	cam_max.top = size_src(icd->rect_max.top, vscale);
-	while (!ret && (is_smaller(cam_rect, &target) ||
-			is_inside(cam_rect, &target)) &&
-	       cam_max.width >= width && cam_max.height >= height) {
+	width = max(cam_rect->width, 2);
+	height = max(cam_rect->height, 2);
+
+	while (!ret && (is_smaller(cam_rect, rect) ||
+			is_inside(cam_rect, rect)) &&
+	       (cap.bounds.width > width || cap.bounds.height > height)) {
 
 		width *= 2;
 		height *= 2;
+
 		cam_rect->width = width;
 		cam_rect->height = height;
 
-		/* We do not know what the camera is capable of, play safe */
-		if (cam_rect->left > target.left)
-			cam_rect->left = cam_max.left;
+		/*
+		 * We do not know what capabilities the camera has to set up
+		 * left and top borders. We could try to be smarter in iterating
+		 * them, e.g., if camera current left is to the right of the
+		 * target left, set it to the middle point between the current
+		 * left and minimum left. But that would add too much
+		 * complexity: we would have to iterate each border separately.
+		 */
+		if (cam_rect->left > rect->left)
+			cam_rect->left = cap.bounds.left;
 
-		if (cam_rect->left + cam_rect->width < target.left + target.width)
-			cam_rect->width = target.left + target.width -
+		if (cam_rect->left + cam_rect->width < rect->left + rect->width)
+			cam_rect->width = rect->left + rect->width -
 				cam_rect->left;
 
-		if (cam_rect->top > target.top)
-			cam_rect->top = cam_max.top;
+		if (cam_rect->top > rect->top)
+			cam_rect->top = cap.bounds.top;
 
-		if (cam_rect->top + cam_rect->height < target.top + target.height)
-			cam_rect->height = target.top + target.height -
+		if (cam_rect->top + cam_rect->height < rect->top + rect->height)
+			cam_rect->height = rect->top + rect->height -
 				cam_rect->top;
 
-		if (cam_rect->width + cam_rect->left >
-		    cam_max.width + cam_max.left)
-			cam_rect->left = max(cam_max.width + cam_max.left -
-					     cam_rect->width, cam_max.left);
-
-		if (cam_rect->height + cam_rect->top >
-		    cam_max.height + cam_max.top)
-			cam_rect->top = max(cam_max.height + cam_max.top -
-					    cam_rect->height, cam_max.top);
-
-		ret = v4l2_subdev_call(sd, video, s_crop, &cam_crop);
-		dev_dbg(icd->dev.parent, "Camera S_CROP %d for %ux%u@%u:%u\n",
-			ret, cam_rect->width, cam_rect->height,
+		v4l2_subdev_call(sd, video, s_crop, cam_crop);
+		ret = client_g_rect(sd, cam_rect);
+		dev_geo(dev, "Camera S_CROP %d for %ux%u@%u:%u\n", ret,
+			cam_rect->width, cam_rect->height,
 			cam_rect->left, cam_rect->top);
 	}
 
-	/*
-	 * If the camera failed to configure cropping, it should not modify the
-	 * rectangle
-	 */
-	if ((ret < 0 && (is_smaller(&icd->rect_current, rect) ||
-			 is_inside(&icd->rect_current, rect))) ||
-	    is_smaller(cam_rect, &target) || is_inside(cam_rect, &target)) {
+	/* S_CROP must not modify the rectangle */
+	if (is_smaller(cam_rect, rect) || is_inside(cam_rect, rect)) {
 		/*
 		 * The camera failed to configure a suitable cropping,
 		 * we cannot use the current rectangle, set to max
 		 */
-		*cam_rect = cam_max;
-		ret = v4l2_subdev_call(sd, video, s_crop, &cam_crop);
-		dev_dbg(icd->dev.parent,
-			"Camera S_CROP %d for max %ux%u@%u:%u\n",
-			ret, cam_rect->width, cam_rect->height,
+		*cam_rect = cap.bounds;
+		v4l2_subdev_call(sd, video, s_crop, cam_crop);
+		ret = client_g_rect(sd, cam_rect);
+		dev_geo(dev, "Camera S_CROP %d for max %ux%u@%u:%u\n", ret,
+			cam_rect->width, cam_rect->height,
 			cam_rect->left, cam_rect->top);
-		if (ret < 0 && ret != -ENOIOCTLCMD)
-			/* All failed, hopefully resume current capture */
-			goto resume_capture;
-
-		/* Finally, adjust the target rectangle */
-		if (target.width > cam_rect->width)
-			target.width = cam_rect->width;
-		if (target.height > cam_rect->height)
-			target.height = cam_rect->height;
-		if (target.left + target.width > cam_rect->left + cam_rect->width)
-			target.left = cam_rect->left + cam_rect->width -
-				target.width;
-		if (target.top + target.height > cam_rect->top + cam_rect->height)
-			target.top = cam_rect->top + cam_rect->height -
-				target.height;
 	}
 
-	/* We now have a rectangle, larger than requested, let's crop */
+	return ret;
+}
+
+static int get_camera_scales(struct v4l2_subdev *sd, struct v4l2_rect *rect,
+			     unsigned int *scale_h, unsigned int *scale_v)
+{
+	struct v4l2_format f;
+	int ret;
+
+	f.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+	ret = v4l2_subdev_call(sd, video, g_fmt, &f);
+	if (ret < 0)
+		return ret;
+
+	*scale_h = calc_generic_scale(rect->width, f.fmt.pix.width);
+	*scale_v = calc_generic_scale(rect->height, f.fmt.pix.height);
+
+	return 0;
+}
+
+static int get_camera_subwin(struct soc_camera_device *icd,
+			     struct v4l2_rect *cam_subrect,
+			     unsigned int cam_hscale, unsigned int cam_vscale)
+{
+	struct sh_mobile_ceu_cam *cam = icd->host_priv;
+	struct v4l2_rect *ceu_rect = &cam->ceu_rect;
+
+	if (!ceu_rect->width) {
+		struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+		struct device *dev = icd->dev.parent;
+		struct v4l2_format f;
+		struct v4l2_pix_format *pix = &f.fmt.pix;
+		int ret;
+		/* First time */
+
+		f.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+		ret = v4l2_subdev_call(sd, video, g_fmt, &f);
+		if (ret < 0)
+			return ret;
+
+		dev_geo(dev, "camera fmt %ux%u\n", pix->width, pix->height);
+
+		if (pix->width > 2560) {
+			ceu_rect->width	 = 2560;
+			ceu_rect->left	 = (pix->width - 2560) / 2;
+		} else {
+			ceu_rect->width	 = pix->width;
+			ceu_rect->left	 = 0;
+		}
+
+		if (pix->height > 1920) {
+			ceu_rect->height = 1920;
+			ceu_rect->top	 = (pix->height - 1920) / 2;
+		} else {
+			ceu_rect->height = pix->height;
+			ceu_rect->top	 = 0;
+		}
+
+		dev_geo(dev, "initialised CEU rect %ux%u@%u:%u\n",
+			ceu_rect->width, ceu_rect->height,
+			ceu_rect->left, ceu_rect->top);
+	}
+
+	cam_subrect->width	= scale_up(ceu_rect->width, cam_hscale);
+	cam_subrect->left	= scale_up(ceu_rect->left, cam_hscale);
+	cam_subrect->height	= scale_up(ceu_rect->height, cam_vscale);
+	cam_subrect->top	= scale_up(ceu_rect->top, cam_vscale);
+
+	return 0;
+}
+
+static int client_s_fmt(struct soc_camera_device *icd, struct v4l2_format *f,
+			bool ceu_can_scale)
+{
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+	struct device *dev = icd->dev.parent;
+	struct v4l2_pix_format *pix = &f->fmt.pix;
+	unsigned int width = pix->width, height = pix->height, tmp_w, tmp_h;
+	unsigned int max_width, max_height;
+	struct v4l2_cropcap cap;
+	int ret;
+
+	cap.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+	ret = v4l2_subdev_call(sd, video, cropcap, &cap);
+	if (ret < 0)
+		return ret;
+
+	max_width = min(cap.bounds.width, 2560);
+	max_height = min(cap.bounds.height, 1920);
+
+	ret = v4l2_subdev_call(sd, video, s_fmt, f);
+	if (ret < 0)
+		return ret;
+
+	dev_geo(dev, "camera scaled to %ux%u\n", pix->width, pix->height);
+
+	if ((width == pix->width && height == pix->height) || !ceu_can_scale)
+		return 0;
+
+	/* Camera set a format, but geometry is not precise, try to improve */
+	tmp_w = pix->width;
+	tmp_h = pix->height;
+
+	/* width <= max_width && height <= max_height - guaranteed by try_fmt */
+	while ((width > tmp_w || height > tmp_h) &&
+	       tmp_w < max_width && tmp_h < max_height) {
+		tmp_w = min(2 * tmp_w, max_width);
+		tmp_h = min(2 * tmp_h, max_height);
+		pix->width = tmp_w;
+		pix->height = tmp_h;
+		ret = v4l2_subdev_call(sd, video, s_fmt, f);
+		dev_geo(dev, "Camera scaled to %ux%u\n",
+			pix->width, pix->height);
+		if (ret < 0) {
+			/* This shouldn't happen */
+			dev_err(dev, "Client failed to set format: %d\n", ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * @rect	- camera cropped rectangle
+ * @sub_rect	- CEU cropped rectangle, mapped back to camera input area
+ * @ceu_rect	- on output calculated CEU crop rectangle
+ */
+static int client_scale(struct soc_camera_device *icd, struct v4l2_rect *rect,
+			struct v4l2_rect *sub_rect, struct v4l2_rect *ceu_rect,
+			struct v4l2_format *f, bool ceu_can_scale)
+{
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+	struct sh_mobile_ceu_cam *cam = icd->host_priv;
+	struct device *dev = icd->dev.parent;
+	struct v4l2_format f_tmp = *f;
+	struct v4l2_pix_format *pix_tmp = &f_tmp.fmt.pix;
+	unsigned int scale_h, scale_v;
+	int ret;
+
+	/* 5. Apply iterative camera S_FMT for camera user window. */
+	ret = client_s_fmt(icd, &f_tmp, ceu_can_scale);
+	if (ret < 0)
+		return ret;
+
+	dev_geo(dev, "5: camera scaled to %ux%u\n",
+		pix_tmp->width, pix_tmp->height);
+
+	/* 6. Retrieve camera output window (g_fmt) */
+
+	/* unneeded - it is already in "f_tmp" */
+
+	/* 7. Calculate new camera scales. */
+	ret = get_camera_scales(sd, rect, &scale_h, &scale_v);
+	if (ret < 0)
+		return ret;
+
+	dev_geo(dev, "7: camera scales %u:%u\n", scale_h, scale_v);
+
+	cam->cam_width		= pix_tmp->width;
+	cam->cam_height		= pix_tmp->height;
+	f->fmt.pix.width	= pix_tmp->width;
+	f->fmt.pix.height	= pix_tmp->height;
 
 	/*
-	 * We have to preserve camera rectangle between close() / open(),
-	 * because soc-camera core calls .set_fmt() on each first open() with
-	 * last before last close() _user_ rectangle, which can be different
-	 * from camera rectangle.
+	 * 8. Calculate new CEU crop - apply camera scales to previously
+	 *    calculated "effective" crop.
 	 */
-	dev_dbg(icd->dev.parent,
-		"SH S_CROP from %ux%u@%u:%u to %ux%u@%u:%u, scale to %ux%u@%u:%u\n",
-		cam_rect->width, cam_rect->height, cam_rect->left, cam_rect->top,
-		target.width, target.height, target.left, target.top,
-		rect->width, rect->height, rect->left, rect->top);
+	ceu_rect->left = scale_down(sub_rect->left, scale_h);
+	ceu_rect->width = scale_down(sub_rect->width, scale_h);
+	ceu_rect->top = scale_down(sub_rect->top, scale_v);
+	ceu_rect->height = scale_down(sub_rect->height, scale_v);
+
+	dev_geo(dev, "8: new CEU rect %ux%u@%u:%u\n",
+		ceu_rect->width, ceu_rect->height,
+		ceu_rect->left, ceu_rect->top);
+
+	return 0;
+}
+
+/* Get combined scales */
+static int get_scales(struct soc_camera_device *icd,
+		      unsigned int *scale_h, unsigned int *scale_v)
+{
+	struct sh_mobile_ceu_cam *cam = icd->host_priv;
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+	struct v4l2_crop cam_crop;
+	unsigned int width_in, height_in;
+	int ret;
 
-	ret = 0;
+	cam_crop.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
 
-ceu_set_rect:
-	cam->camera_rect = *cam_rect;
+	ret = client_g_rect(sd, &cam_crop.c);
+	if (ret < 0)
+		return ret;
 
-	rect->width	= size_dst(target.width, hscale);
-	rect->left	= size_dst(target.left, hscale);
-	rect->height	= size_dst(target.height, vscale);
-	rect->top	= size_dst(target.top, vscale);
+	ret = get_camera_scales(sd, &cam_crop.c, scale_h, scale_v);
+	if (ret < 0)
+		return ret;
 
-	sh_mobile_ceu_set_rect(icd, rect);
+	width_in = scale_up(cam->ceu_rect.width, *scale_h);
+	height_in = scale_up(cam->ceu_rect.height, *scale_v);
 
-resume_capture:
-	/* Set CAMOR, CAPWR, CFSZR, take care of CDWDR */
+	*scale_h = calc_generic_scale(cam->ceu_rect.width, icd->user_width);
+	*scale_v = calc_generic_scale(cam->ceu_rect.height, icd->user_height);
+
+	return 0;
+}
+
+/*
+ * CEU can scale and crop, but we don't want to waste bandwidth and kill the
+ * framerate by always requesting the maximum image from the client. See
+ * Documentation/video4linux/sh_mobile_camera_ceu.txt for a description of
+ * scaling and cropping algorithms and for the meaning of referenced here steps.
+ */
+static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd,
+				  struct v4l2_crop *a)
+{
+	struct v4l2_rect *rect = &a->c;
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct sh_mobile_ceu_dev *pcdev = ici->priv;
+	struct v4l2_crop cam_crop;
+	struct sh_mobile_ceu_cam *cam = icd->host_priv;
+	struct v4l2_rect *cam_rect = &cam_crop.c, *ceu_rect = &cam->ceu_rect;
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+	struct device *dev = icd->dev.parent;
+	struct v4l2_format f;
+	struct v4l2_pix_format *pix = &f.fmt.pix;
+	unsigned int scale_comb_h, scale_comb_v, scale_ceu_h, scale_ceu_v,
+		out_width, out_height;
+	u32 capsr, cflcr;
+	int ret;
+
+	/* 1. Calculate current combined scales. */
+	ret = get_scales(icd, &scale_comb_h, &scale_comb_v);
+	if (ret < 0)
+		return ret;
+
+	dev_geo(dev, "1: combined scales %u:%u\n", scale_comb_h, scale_comb_v);
+
+	/* 2. Apply iterative camera S_CROP for new input window. */
+	ret = client_s_crop(sd, a, &cam_crop);
+	if (ret < 0)
+		return ret;
+
+	dev_geo(dev, "2: camera cropped to %ux%u@%u:%u\n",
+		cam_rect->width, cam_rect->height,
+		cam_rect->left, cam_rect->top);
+
+	/* On success cam_crop contains current camera crop */
+
+	/*
+	 * 3. If old combined scales applied to new crop produce an impossible
+	 *    user window, adjust scales to produce nearest possible window.
+	 */
+	out_width	= scale_down(rect->width, scale_comb_h);
+	out_height	= scale_down(rect->height, scale_comb_v);
+
+	if (out_width > 2560)
+		out_width = 2560;
+	else if (out_width < 2)
+		out_width = 2;
+
+	if (out_height > 1920)
+		out_height = 1920;
+	else if (out_height < 4)
+		out_height = 4;
+
+	dev_geo(dev, "3: Adjusted output %ux%u\n", out_width, out_height);
+
+	/* 4. Use G_CROP to retrieve actual input window: already in cam_crop */
+
+	/*
+	 * 5. Using actual input window and calculated combined scales calculate
+	 *    camera target output window.
+	 */
+	pix->width		= scale_down(cam_rect->width, scale_comb_h);
+	pix->height		= scale_down(cam_rect->height, scale_comb_v);
+
+	dev_geo(dev, "5: camera target %ux%u\n", pix->width, pix->height);
+
+	/* 6. - 9. */
+	pix->pixelformat	= cam->camera_fmt->fourcc;
+	pix->colorspace		= cam->camera_fmt->colorspace;
+
+	capsr = capture_save_reset(pcdev);
+	dev_dbg(dev, "CAPSR 0x%x, CFLCR 0x%x\n", capsr, pcdev->cflcr);
+
+	/* Make relative to camera rectangle */
+	rect->left		-= cam_rect->left;
+	rect->top		-= cam_rect->top;
+
+	f.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+	ret = client_scale(icd, cam_rect, rect, ceu_rect, &f,
+			   pcdev->image_mode && !pcdev->is_interlaced);
+
+	dev_geo(dev, "6-9: %d\n", ret);
+
+	/* 10. Use CEU cropping to crop to the new window. */
+	sh_mobile_ceu_set_rect(icd, out_width, out_height);
+
+	dev_geo(dev, "10: CEU cropped to %ux%u@%u:%u\n",
+		ceu_rect->width, ceu_rect->height,
+		ceu_rect->left, ceu_rect->top);
+
+	/*
+	 * 11. Calculate CEU scales from camera scales from results of (10) and
+	 *     user window from (3)
+	 */
+	scale_ceu_h = calc_scale(ceu_rect->width, &out_width);
+	scale_ceu_v = calc_scale(ceu_rect->height, &out_height);
+
+	dev_geo(dev, "11: CEU scales %u:%u\n", scale_ceu_h, scale_ceu_v);
+
+	/* 12. Apply CEU scales. */
+	cflcr = scale_ceu_h | (scale_ceu_v << 16);
+	if (cflcr != pcdev->cflcr) {
+		pcdev->cflcr = cflcr;
+		ceu_write(pcdev, CFLCR, cflcr);
+	}
+
+	/* Restore capture */
 	if (pcdev->active)
 		capsr |= 1;
 	capture_restore(pcdev, capsr);
 
+	icd->user_width = out_width;
+	icd->user_height = out_height;
+
 	/* Even if only camera cropping succeeded */
 	return ret;
 }
@@ -1018,121 +1312,137 @@ static int sh_mobile_ceu_set_fmt(struct soc_camera_device *icd,
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
 	struct sh_mobile_ceu_cam *cam = icd->host_priv;
 	struct v4l2_pix_format *pix = &f->fmt.pix;
+	struct v4l2_format cam_f = *f;
+	struct v4l2_pix_format *cam_pix = &cam_f.fmt.pix;
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+	struct device *dev = icd->dev.parent;
 	__u32 pixfmt = pix->pixelformat;
 	const struct soc_camera_format_xlate *xlate;
-	unsigned int width = pix->width, height = pix->height, tmp_w, tmp_h;
-	u16 vscale, hscale;
-	int ret, is_interlaced;
+	struct v4l2_crop cam_crop;
+	struct v4l2_rect *cam_rect = &cam_crop.c, cam_subrect, ceu_rect;
+	unsigned int scale_cam_h, scale_cam_v;
+	u16 scale_v, scale_h;
+	int ret;
+	bool is_interlaced, image_mode;
 
 	switch (pix->field) {
 	case V4L2_FIELD_INTERLACED:
-		is_interlaced = 1;
+		is_interlaced = true;
 		break;
 	case V4L2_FIELD_ANY:
 	default:
 		pix->field = V4L2_FIELD_NONE;
 		/* fall-through */
 	case V4L2_FIELD_NONE:
-		is_interlaced = 0;
+		is_interlaced = false;
 		break;
 	}
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
 	if (!xlate) {
-		dev_warn(icd->dev.parent, "Format %x not found\n", pixfmt);
+		dev_warn(dev, "Format %x not found\n", pixfmt);
 		return -EINVAL;
 	}
 
-	pix->pixelformat = xlate->cam_fmt->fourcc;
-	ret = v4l2_subdev_call(sd, video, s_fmt, f);
-	pix->pixelformat = pixfmt;
-	dev_dbg(icd->dev.parent,
-		"Camera %d fmt %ux%u, requested %ux%u, max %ux%u\n",
-		ret, pix->width, pix->height, width, height,
-		icd->rect_max.width, icd->rect_max.height);
+	/* 1. Calculate current camera scales. */
+	cam_crop.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+	ret = client_g_rect(sd, cam_rect);
+	if (ret < 0)
+		return ret;
+
+	ret = get_camera_scales(sd, cam_rect, &scale_cam_h, &scale_cam_v);
+	if (ret < 0)
+		return ret;
+
+	dev_geo(dev, "1: camera scales %u:%u\n", scale_cam_h, scale_cam_v);
+
+	/*
+	 * 2. Calculate "effective" input crop (sensor subwindow) - CEU crop
+	 *    scaled back at current camera scales onto input window.
+	 */
+	ret = get_camera_subwin(icd, &cam_subrect, scale_cam_h, scale_cam_v);
 	if (ret < 0)
 		return ret;
 
+	dev_geo(dev, "2: subwin %ux%u@%u:%u\n",
+		cam_subrect.width, cam_subrect.height,
+		cam_subrect.left, cam_subrect.top);
+
+	/*
+	 * 3. Calculate new combined scales from "effective" input window to
+	 *    requested user window.
+	 */
+	scale_h = calc_generic_scale(cam_subrect.width, pix->width);
+	scale_v = calc_generic_scale(cam_subrect.height, pix->height);
+
+	dev_geo(dev, "3: scales %u:%u\n", scale_h, scale_v);
+
+	/*
+	 * 4. Calculate camera output window by applying combined scales to real
+	 *    input window.
+	 */
+	cam_pix->width = scale_down(cam_rect->width, scale_h);
+	cam_pix->height = scale_down(cam_rect->height, scale_v);
+	cam_pix->pixelformat = xlate->cam_fmt->fourcc;
+
 	switch (pixfmt) {
 	case V4L2_PIX_FMT_NV12:
 	case V4L2_PIX_FMT_NV21:
 	case V4L2_PIX_FMT_NV16:
 	case V4L2_PIX_FMT_NV61:
-		pcdev->image_mode = 1;
+		image_mode = true;
 		break;
 	default:
-		pcdev->image_mode = 0;
+		image_mode = false;
 	}
 
-	if ((abs(width - pix->width) < 4 && abs(height - pix->height) < 4) ||
-	    !pcdev->image_mode || is_interlaced) {
-		hscale = 0;
-		vscale = 0;
-		goto out;
-	}
+	dev_geo(dev, "4: camera output %ux%u\n",
+		cam_pix->width, cam_pix->height);
 
-	/* Camera set a format, but geometry is not precise, try to improve */
-	/*
-	 * FIXME: when soc-camera is converted to implement traditional S_FMT
-	 * and S_CROP semantics, replace CEU limits with camera maxima
-	 */
-	tmp_w = pix->width;
-	tmp_h = pix->height;
-	while ((width > tmp_w || height > tmp_h) &&
-	       tmp_w < 2560 && tmp_h < 1920) {
-		tmp_w = min(2 * tmp_w, (__u32)2560);
-		tmp_h = min(2 * tmp_h, (__u32)1920);
-		pix->width = tmp_w;
-		pix->height = tmp_h;
-		pix->pixelformat = xlate->cam_fmt->fourcc;
-		ret = v4l2_subdev_call(sd, video, s_fmt, f);
-		pix->pixelformat = pixfmt;
-		dev_dbg(icd->dev.parent, "Camera scaled to %ux%u\n",
-			pix->width, pix->height);
-		if (ret < 0) {
-			/* This shouldn't happen */
-			dev_err(icd->dev.parent,
-				"Client failed to set format: %d\n", ret);
-			return ret;
-		}
-	}
+	/* 5. - 9. */
+	ret = client_scale(icd, cam_rect, &cam_subrect, &ceu_rect, &cam_f,
+			   image_mode && !is_interlaced);
+
+	dev_geo(dev, "5-9: client scale %d\n", ret);
+
+	/* Done with the camera. Now see if we can improve the result */
+
+	dev_dbg(dev, "Camera %d fmt %ux%u, requested %ux%u\n",
+		ret, cam_pix->width, cam_pix->height, pix->width, pix->height);
+	if (ret < 0)
+		return ret;
+
+	/* 10. Use CEU scaling to scale to the requested user window. */
 
 	/* We cannot scale up */
-	if (width > pix->width)
-		width = pix->width;
+	if (pix->width > cam_pix->width)
+		pix->width = cam_pix->width;
+	if (pix->width > ceu_rect.width)
+		pix->width = ceu_rect.width;
 
-	if (height > pix->height)
-		height = pix->height;
+	if (pix->height > cam_pix->height)
+		pix->height = cam_pix->height;
+	if (pix->height > ceu_rect.height)
+		pix->height = ceu_rect.height;
 
 	/* Let's rock: scale pix->{width x height} down to width x height */
-	hscale = calc_scale(pix->width, &width);
-	vscale = calc_scale(pix->height, &height);
+	scale_h = calc_scale(ceu_rect.width, &pix->width);
+	scale_v = calc_scale(ceu_rect.height, &pix->height);
 
-	dev_dbg(icd->dev.parent, "W: %u : 0x%x = %u, H: %u : 0x%x = %u\n",
-		pix->width, hscale, width, pix->height, vscale, height);
+	dev_geo(dev, "10: W: %u : 0x%x = %u, H: %u : 0x%x = %u\n",
+		ceu_rect.width, scale_h, pix->width,
+		ceu_rect.height, scale_v, pix->height);
 
-out:
-	pcdev->cflcr = hscale | (vscale << 16);
+	pcdev->cflcr = scale_h | (scale_v << 16);
 
 	icd->buswidth = xlate->buswidth;
 	icd->current_fmt = xlate->host_fmt;
 	cam->camera_fmt = xlate->cam_fmt;
-	cam->camera_rect.width = pix->width;
-	cam->camera_rect.height = pix->height;
-
-	icd->rect_max.left = size_dst(cam->camera_max.left, hscale);
-	icd->rect_max.width = size_dst(cam->camera_max.width, hscale);
-	icd->rect_max.top = size_dst(cam->camera_max.top, vscale);
-	icd->rect_max.height = size_dst(cam->camera_max.height, vscale);
-
-	icd->rect_current.left = icd->rect_max.left;
-	icd->rect_current.top = icd->rect_max.top;
+	cam->ceu_rect = ceu_rect;
 
 	pcdev->is_interlaced = is_interlaced;
-
-	pix->width = width;
-	pix->height = height;
+	pcdev->image_mode = image_mode;
 
 	return 0;
 }
diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index c6cccdf8daf..86e0648f65a 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -278,6 +278,9 @@ static void soc_camera_free_user_formats(struct soc_camera_device *icd)
 	icd->user_formats = NULL;
 }
 
+#define pixfmtstr(x) (x) & 0xff, ((x) >> 8) & 0xff, ((x) >> 16) & 0xff, \
+	((x) >> 24) & 0xff
+
 /* Called with .vb_lock held */
 static int soc_camera_set_fmt(struct soc_camera_file *icf,
 			      struct v4l2_format *f)
@@ -287,6 +290,9 @@ static int soc_camera_set_fmt(struct soc_camera_file *icf,
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 	int ret;
 
+	dev_dbg(&icd->dev, "S_FMT(%c%c%c%c, %ux%u)\n",
+		pixfmtstr(pix->pixelformat), pix->width, pix->height);
+
 	/* We always call try_fmt() before set_fmt() or set_crop() */
 	ret = ici->ops->try_fmt(icd, f);
 	if (ret < 0)
@@ -302,17 +308,17 @@ static int soc_camera_set_fmt(struct soc_camera_file *icf,
 		return -EINVAL;
 	}
 
-	icd->rect_current.width		= pix->width;
-	icd->rect_current.height	= pix->height;
-	icf->vb_vidq.field		=
-		icd->field		= pix->field;
+	icd->user_width		= pix->width;
+	icd->user_height	= pix->height;
+	icf->vb_vidq.field	=
+		icd->field	= pix->field;
 
 	if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
 		dev_warn(&icd->dev, "Attention! Wrong buf-type %d\n",
 			 f->type);
 
 	dev_dbg(&icd->dev, "set width: %d height: %d\n",
-		icd->rect_current.width, icd->rect_current.height);
+		icd->user_width, icd->user_height);
 
 	/* set physical bus parameters */
 	return ici->ops->set_bus_param(icd, pix->pixelformat);
@@ -355,8 +361,8 @@ static int soc_camera_open(struct file *file)
 		struct v4l2_format f = {
 			.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
 			.fmt.pix = {
-				.width		= icd->rect_current.width,
-				.height		= icd->rect_current.height,
+				.width		= icd->user_width,
+				.height		= icd->user_height,
 				.field		= icd->field,
 				.pixelformat	= icd->current_fmt->fourcc,
 				.colorspace	= icd->current_fmt->colorspace,
@@ -557,8 +563,8 @@ static int soc_camera_g_fmt_vid_cap(struct file *file, void *priv,
 
 	WARN_ON(priv != file->private_data);
 
-	pix->width		= icd->rect_current.width;
-	pix->height		= icd->rect_current.height;
+	pix->width		= icd->user_width;
+	pix->height		= icd->user_height;
 	pix->field		= icf->vb_vidq.field;
 	pix->pixelformat	= icd->current_fmt->fourcc;
 	pix->bytesperline	= pix->width *
@@ -722,17 +728,9 @@ static int soc_camera_cropcap(struct file *file, void *fh,
 {
 	struct soc_camera_file *icf = file->private_data;
 	struct soc_camera_device *icd = icf->icd;
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 
-	a->type				= V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	a->bounds			= icd->rect_max;
-	a->defrect.left			= icd->rect_max.left;
-	a->defrect.top			= icd->rect_max.top;
-	a->defrect.width		= DEFAULT_WIDTH;
-	a->defrect.height		= DEFAULT_HEIGHT;
-	a->pixelaspect.numerator	= 1;
-	a->pixelaspect.denominator	= 1;
-
-	return 0;
+	return ici->ops->cropcap(icd, a);
 }
 
 static int soc_camera_g_crop(struct file *file, void *fh,
@@ -740,11 +738,14 @@ static int soc_camera_g_crop(struct file *file, void *fh,
 {
 	struct soc_camera_file *icf = file->private_data;
 	struct soc_camera_device *icd = icf->icd;
+	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	int ret;
 
-	a->type	= V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	a->c	= icd->rect_current;
+	mutex_lock(&icf->vb_vidq.vb_lock);
+	ret = ici->ops->get_crop(icd, a);
+	mutex_unlock(&icf->vb_vidq.vb_lock);
 
-	return 0;
+	return ret;
 }
 
 /*
@@ -759,49 +760,33 @@ static int soc_camera_s_crop(struct file *file, void *fh,
 	struct soc_camera_file *icf = file->private_data;
 	struct soc_camera_device *icd = icf->icd;
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
-	struct v4l2_rect rect = a->c;
+	struct v4l2_rect *rect = &a->c;
+	struct v4l2_crop current_crop;
 	int ret;
 
 	if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
 		return -EINVAL;
 
+	dev_dbg(&icd->dev, "S_CROP(%ux%u@%u:%u)\n",
+		rect->width, rect->height, rect->left, rect->top);
+
 	/* Cropping is allowed during a running capture, guard consistency */
 	mutex_lock(&icf->vb_vidq.vb_lock);
 
+	/* If get_crop fails, we'll let host and / or client drivers decide */
+	ret = ici->ops->get_crop(icd, &current_crop);
+
 	/* Prohibit window size change with initialised buffers */
-	if (icf->vb_vidq.bufs[0] && (rect.width != icd->rect_current.width ||
-				     rect.height != icd->rect_current.height)) {
+	if (icf->vb_vidq.bufs[0] && !ret &&
+	    (a->c.width != current_crop.c.width ||
+	     a->c.height != current_crop.c.height)) {
 		dev_err(&icd->dev,
 			"S_CROP denied: queue initialised and sizes differ\n");
 		ret = -EBUSY;
-		goto unlock;
+	} else {
+		ret = ici->ops->set_crop(icd, a);
 	}
 
-	if (rect.width > icd->rect_max.width)
-		rect.width = icd->rect_max.width;
-
-	if (rect.width < icd->width_min)
-		rect.width = icd->width_min;
-
-	if (rect.height > icd->rect_max.height)
-		rect.height = icd->rect_max.height;
-
-	if (rect.height < icd->height_min)
-		rect.height = icd->height_min;
-
-	if (rect.width + rect.left > icd->rect_max.width + icd->rect_max.left)
-		rect.left = icd->rect_max.width + icd->rect_max.left -
-			rect.width;
-
-	if (rect.height + rect.top > icd->rect_max.height + icd->rect_max.top)
-		rect.top = icd->rect_max.height + icd->rect_max.top -
-			rect.height;
-
-	ret = ici->ops->set_crop(icd, a);
-	if (!ret)
-		icd->rect_current = rect;
-
-unlock:
 	mutex_unlock(&icf->vb_vidq.vb_lock);
 
 	return ret;
@@ -926,6 +911,8 @@ static int soc_camera_probe(struct device *dev)
 	struct soc_camera_host *ici = to_soc_camera_host(dev->parent);
 	struct soc_camera_link *icl = to_soc_camera_link(icd);
 	struct device *control = NULL;
+	struct v4l2_subdev *sd;
+	struct v4l2_format f = {.type = V4L2_BUF_TYPE_VIDEO_CAPTURE};
 	int ret;
 
 	dev_info(dev, "Probing %s\n", dev_name(dev));
@@ -982,7 +969,6 @@ static int soc_camera_probe(struct device *dev)
 	if (ret < 0)
 		goto eiufmt;
 
-	icd->rect_current = icd->rect_max;
 	icd->field = V4L2_FIELD_ANY;
 
 	/* ..._video_start() will create a device node, so we have to protect */
@@ -992,9 +978,15 @@ static int soc_camera_probe(struct device *dev)
 	if (ret < 0)
 		goto evidstart;
 
+	/* Try to improve our guess of a reasonable window format */
+	sd = soc_camera_to_subdev(icd);
+	if (!v4l2_subdev_call(sd, video, g_fmt, &f)) {
+		icd->user_width		= f.fmt.pix.width;
+		icd->user_height	= f.fmt.pix.height;
+	}
+
 	/* Do we have to sysfs_remove_link() before device_unregister()? */
-	if (to_soc_camera_control(icd) &&
-	    sysfs_create_link(&icd->dev.kobj, &to_soc_camera_control(icd)->kobj,
+	if (sysfs_create_link(&icd->dev.kobj, &to_soc_camera_control(icd)->kobj,
 			      "control"))
 		dev_warn(&icd->dev, "Failed creating the control symlink\n");
 
@@ -1103,6 +1095,25 @@ static void dummy_release(struct device *dev)
 {
 }
 
+static int default_cropcap(struct soc_camera_device *icd,
+			   struct v4l2_cropcap *a)
+{
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+	return v4l2_subdev_call(sd, video, cropcap, a);
+}
+
+static int default_g_crop(struct soc_camera_device *icd, struct v4l2_crop *a)
+{
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+	return v4l2_subdev_call(sd, video, g_crop, a);
+}
+
+static int default_s_crop(struct soc_camera_device *icd, struct v4l2_crop *a)
+{
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+	return v4l2_subdev_call(sd, video, s_crop, a);
+}
+
 int soc_camera_host_register(struct soc_camera_host *ici)
 {
 	struct soc_camera_host *ix;
@@ -1111,7 +1122,6 @@ int soc_camera_host_register(struct soc_camera_host *ici)
 	if (!ici || !ici->ops ||
 	    !ici->ops->try_fmt ||
 	    !ici->ops->set_fmt ||
-	    !ici->ops->set_crop ||
 	    !ici->ops->set_bus_param ||
 	    !ici->ops->querycap ||
 	    !ici->ops->init_videobuf ||
@@ -1122,6 +1132,13 @@ int soc_camera_host_register(struct soc_camera_host *ici)
 	    !ici->v4l2_dev.dev)
 		return -EINVAL;
 
+	if (!ici->ops->set_crop)
+		ici->ops->set_crop = default_s_crop;
+	if (!ici->ops->get_crop)
+		ici->ops->get_crop = default_g_crop;
+	if (!ici->ops->cropcap)
+		ici->ops->cropcap = default_cropcap;
+
 	mutex_lock(&list_lock);
 	list_for_each_entry(ix, &hosts, list) {
 		if (ix->nr == ici->nr) {
@@ -1321,6 +1338,9 @@ static int __devinit soc_camera_pdrv_probe(struct platform_device *pdev)
 	if (ret < 0)
 		goto escdevreg;
 
+	icd->user_width		= DEFAULT_WIDTH;
+	icd->user_height	= DEFAULT_HEIGHT;
+
 	return 0;
 
 escdevreg:
diff --git a/drivers/media/video/soc_camera_platform.c b/drivers/media/video/soc_camera_platform.c
index aec2cadbd2e..3825c358172 100644
--- a/drivers/media/video/soc_camera_platform.c
+++ b/drivers/media/video/soc_camera_platform.c
@@ -127,10 +127,6 @@ static int soc_camera_platform_probe(struct platform_device *pdev)
 	/* Set the control device reference */
 	dev_set_drvdata(&icd->dev, &pdev->dev);
 
-	icd->width_min		= 0;
-	icd->rect_max.width	= p->format.width;
-	icd->height_min		= 0;
-	icd->rect_max.height	= p->format.height;
 	icd->y_skip_top		= 0;
 	icd->ops		= &soc_camera_platform_ops;
 
diff --git a/drivers/media/video/tw9910.c b/drivers/media/video/tw9910.c
index 94bd5b09f05..fbf4130dfc5 100644
--- a/drivers/media/video/tw9910.c
+++ b/drivers/media/video/tw9910.c
@@ -715,8 +715,88 @@ tw9910_set_fmt_error:
 	return ret;
 }
 
+static int tw9910_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
+{
+	struct i2c_client *client = sd->priv;
+	struct tw9910_priv *priv = to_tw9910(client);
+
+	if (!priv->scale) {
+		int ret;
+		struct v4l2_crop crop = {
+			.c = {
+				.left	= 0,
+				.top	= 0,
+				.width	= 640,
+				.height	= 480,
+			},
+		};
+		ret = tw9910_s_crop(sd, &crop);
+		if (ret < 0)
+			return ret;
+	}
+
+	a->c.left	= 0;
+	a->c.top	= 0;
+	a->c.width	= priv->scale->width;
+	a->c.height	= priv->scale->height;
+	a->type		= V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+	return 0;
+}
+
+static int tw9910_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
+{
+	a->bounds.left			= 0;
+	a->bounds.top			= 0;
+	a->bounds.width			= 768;
+	a->bounds.height		= 576;
+	a->defrect.left			= 0;
+	a->defrect.top			= 0;
+	a->defrect.width		= 640;
+	a->defrect.height		= 480;
+	a->type				= V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	a->pixelaspect.numerator	= 1;
+	a->pixelaspect.denominator	= 1;
+
+	return 0;
+}
+
+static int tw9910_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
+{
+	struct i2c_client *client = sd->priv;
+	struct tw9910_priv *priv = to_tw9910(client);
+	struct v4l2_pix_format *pix = &f->fmt.pix;
+
+	if (!priv->scale) {
+		int ret;
+		struct v4l2_crop crop = {
+			.c = {
+				.left	= 0,
+				.top	= 0,
+				.width	= 640,
+				.height	= 480,
+			},
+		};
+		ret = tw9910_s_crop(sd, &crop);
+		if (ret < 0)
+			return ret;
+	}
+
+	f->type			= V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+	pix->width		= priv->scale->width;
+	pix->height		= priv->scale->height;
+	pix->pixelformat	= V4L2_PIX_FMT_VYUY;
+	pix->colorspace		= V4L2_COLORSPACE_SMPTE170M;
+	pix->field		= V4L2_FIELD_INTERLACED;
+
+	return 0;
+}
+
 static int tw9910_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
 {
+	struct i2c_client *client = sd->priv;
+	struct tw9910_priv *priv = to_tw9910(client);
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 	/* See tw9910_s_crop() - no proper cropping support */
 	struct v4l2_crop a = {
@@ -741,8 +821,8 @@ static int tw9910_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
 
 	ret = tw9910_s_crop(sd, &a);
 	if (!ret) {
-		pix->width = a.c.width;
-		pix->height = a.c.height;
+		pix->width = priv->scale->width;
+		pix->height = priv->scale->height;
 	}
 	return ret;
 }
@@ -838,8 +918,11 @@ static struct v4l2_subdev_core_ops tw9910_subdev_core_ops = {
 
 static struct v4l2_subdev_video_ops tw9910_subdev_video_ops = {
 	.s_stream	= tw9910_s_stream,
+	.g_fmt		= tw9910_g_fmt,
 	.s_fmt		= tw9910_s_fmt,
 	.try_fmt	= tw9910_try_fmt,
+	.cropcap	= tw9910_cropcap,
+	.g_crop		= tw9910_g_crop,
 	.s_crop		= tw9910_s_crop,
 };
 
@@ -852,20 +935,6 @@ static struct v4l2_subdev_ops tw9910_subdev_ops = {
  * i2c_driver function
  */
 
-/* This is called during probe, so, setting rect_max is Ok here: scale == 1 */
-static void limit_to_scale(struct soc_camera_device *icd,
-			   const struct tw9910_scale_ctrl *scale)
-{
-	if (scale->width > icd->rect_max.width)
-		icd->rect_max.width  = scale->width;
-	if (scale->width < icd->width_min)
-		icd->width_min = scale->width;
-	if (scale->height > icd->rect_max.height)
-		icd->rect_max.height = scale->height;
-	if (scale->height < icd->height_min)
-		icd->height_min = scale->height;
-}
-
 static int tw9910_probe(struct i2c_client *client,
 			const struct i2c_device_id *did)
 
@@ -876,8 +945,7 @@ static int tw9910_probe(struct i2c_client *client,
 	struct i2c_adapter             *adapter =
 		to_i2c_adapter(client->dev.parent);
 	struct soc_camera_link         *icl;
-	const struct tw9910_scale_ctrl *scale;
-	int                             i, ret;
+	int                             ret;
 
 	if (!icd) {
 		dev_err(&client->dev, "TW9910: missing soc-camera data!\n");
@@ -908,22 +976,6 @@ static int tw9910_probe(struct i2c_client *client,
 	icd->ops     = &tw9910_ops;
 	icd->iface   = info->link.bus_id;
 
-	/*
-	 * set width and height
-	 */
-	icd->rect_max.width  = tw9910_ntsc_scales[0].width; /* set default */
-	icd->width_min  = tw9910_ntsc_scales[0].width;
-	icd->rect_max.height = tw9910_ntsc_scales[0].height;
-	icd->height_min = tw9910_ntsc_scales[0].height;
-
-	scale = tw9910_ntsc_scales;
-	for (i = 0; i < ARRAY_SIZE(tw9910_ntsc_scales); i++)
-		limit_to_scale(icd, scale + i);
-
-	scale = tw9910_pal_scales;
-	for (i = 0; i < ARRAY_SIZE(tw9910_pal_scales); i++)
-		limit_to_scale(icd, scale + i);
-
 	ret = tw9910_video_probe(icd, client);
 	if (ret) {
 		icd->ops = NULL;
-- 
cgit v1.2.3


From a4c56fd8892e51d675f7665ddee4fd9d7e5c2cc3 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 25 Aug 2009 11:53:23 -0300
Subject: V4L/DVB (12535): soc-camera: remove .init() and .release() methods
 from struct soc_camera_ops

Remove unneeded soc-camera operations, this also makes the soc-camera API to
v4l2 subdevices thinner.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/mt9m001.c    | 22 +++++++---------------
 drivers/media/video/mt9m111.c    | 40 ++++++++--------------------------------
 drivers/media/video/mt9t031.c    | 23 ++++++-----------------
 drivers/media/video/mt9v022.c    |  8 +++++---
 drivers/media/video/soc_camera.c | 11 -----------
 5 files changed, 26 insertions(+), 78 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/mt9m001.c b/drivers/media/video/mt9m001.c
index e8cf56189ef..4b394798a29 100644
--- a/drivers/media/video/mt9m001.c
+++ b/drivers/media/video/mt9m001.c
@@ -122,9 +122,8 @@ static int reg_clear(struct i2c_client *client, const u8 reg,
 	return reg_write(client, reg, ret & ~data);
 }
 
-static int mt9m001_init(struct soc_camera_device *icd)
+static int mt9m001_init(struct i2c_client *client)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 	int ret;
 
 	dev_dbg(&client->dev, "%s\n", __func__);
@@ -144,16 +143,6 @@ static int mt9m001_init(struct soc_camera_device *icd)
 	return ret;
 }
 
-static int mt9m001_release(struct soc_camera_device *icd)
-{
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-
-	/* Disable the chip */
-	reg_write(client, MT9M001_OUTPUT_CONTROL, 0);
-
-	return 0;
-}
-
 static int mt9m001_s_stream(struct v4l2_subdev *sd, int enable)
 {
 	struct i2c_client *client = sd->priv;
@@ -446,8 +435,6 @@ static const struct v4l2_queryctrl mt9m001_controls[] = {
 };
 
 static struct soc_camera_ops mt9m001_ops = {
-	.init			= mt9m001_init,
-	.release		= mt9m001_release,
 	.set_bus_param		= mt9m001_set_bus_param,
 	.query_bus_param	= mt9m001_query_bus_param,
 	.controls		= mt9m001_controls,
@@ -581,6 +568,7 @@ static int mt9m001_video_probe(struct soc_camera_device *icd,
 	struct soc_camera_link *icl = to_soc_camera_link(icd);
 	s32 data;
 	unsigned long flags;
+	int ret;
 
 	/* We must have a parent by now. And it cannot be a wrong one.
 	 * So this entire test is completely redundant. */
@@ -637,7 +625,11 @@ static int mt9m001_video_probe(struct soc_camera_device *icd,
 	dev_info(&client->dev, "Detected a MT9M001 chip ID %x (%s)\n", data,
 		 data == 0x8431 ? "C12STM" : "C12ST");
 
-	return 0;
+	ret = mt9m001_init(client);
+	if (ret < 0)
+		dev_err(&client->dev, "Failed to initialise the camera\n");
+
+	return ret;
 }
 
 static void mt9m001_video_remove(struct soc_camera_device *icd)
diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c
index 920dd53c4cf..186902f9be2 100644
--- a/drivers/media/video/mt9m111.c
+++ b/drivers/media/video/mt9m111.c
@@ -672,13 +672,9 @@ static const struct v4l2_queryctrl mt9m111_controls[] = {
 };
 
 static int mt9m111_resume(struct soc_camera_device *icd);
-static int mt9m111_init(struct soc_camera_device *icd);
-static int mt9m111_release(struct soc_camera_device *icd);
 
 static struct soc_camera_ops mt9m111_ops = {
-	.init			= mt9m111_init,
 	.resume			= mt9m111_resume,
-	.release		= mt9m111_release,
 	.query_bus_param	= mt9m111_query_bus_param,
 	.set_bus_param		= mt9m111_set_bus_param,
 	.controls		= mt9m111_controls,
@@ -880,9 +876,8 @@ static int mt9m111_resume(struct soc_camera_device *icd)
 	return ret;
 }
 
-static int mt9m111_init(struct soc_camera_device *icd)
+static int mt9m111_init(struct i2c_client *client)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 	struct mt9m111 *mt9m111 = to_mt9m111(client);
 	int ret;
 
@@ -899,22 +894,6 @@ static int mt9m111_init(struct soc_camera_device *icd)
 	return ret;
 }
 
-static int mt9m111_release(struct soc_camera_device *icd)
-{
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
-	int ret;
-
-	ret = reg_clear(RESET, MT9M111_RESET_CHIP_ENABLE);
-	if (!ret)
-		mt9m111->powered = 0;
-
-	if (ret < 0)
-		dev_err(&client->dev, "mt9m11x release failed: %d\n", ret);
-
-	return ret;
-}
-
 /*
  * Interface active, can use i2c. If it fails, it can indeed mean, that
  * this wasn't our capture interface, so, we wait for the right one
@@ -934,10 +913,13 @@ static int mt9m111_video_probe(struct soc_camera_device *icd,
 	    to_soc_camera_host(icd->dev.parent)->nr != icd->iface)
 		return -ENODEV;
 
-	ret = mt9m111_enable(client);
-	if (ret)
-		goto ei2c;
-	ret = mt9m111_reset(client);
+	mt9m111->autoexposure = 1;
+	mt9m111->autowhitebalance = 1;
+
+	mt9m111->swap_rgb_even_odd = 1;
+	mt9m111->swap_rgb_red_blue = 1;
+
+	ret = mt9m111_init(client);
 	if (ret)
 		goto ei2c;
 
@@ -962,12 +944,6 @@ static int mt9m111_video_probe(struct soc_camera_device *icd,
 
 	dev_info(&client->dev, "Detected a MT9M11x chip ID %x\n", data);
 
-	mt9m111->autoexposure = 1;
-	mt9m111->autowhitebalance = 1;
-
-	mt9m111->swap_rgb_even_odd = 1;
-	mt9m111->swap_rgb_red_blue = 1;
-
 ei2c:
 	return ret;
 }
diff --git a/drivers/media/video/mt9t031.c b/drivers/media/video/mt9t031.c
index f234ba60204..9a648968938 100644
--- a/drivers/media/video/mt9t031.c
+++ b/drivers/media/video/mt9t031.c
@@ -163,20 +163,6 @@ static int mt9t031_disable(struct i2c_client *client)
 	return 0;
 }
 
-static int mt9t031_init(struct soc_camera_device *icd)
-{
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-
-	return mt9t031_idle(client);
-}
-
-static int mt9t031_release(struct soc_camera_device *icd)
-{
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-
-	return mt9t031_disable(client);
-}
-
 static int mt9t031_s_stream(struct v4l2_subdev *sd, int enable)
 {
 	struct i2c_client *client = sd->priv;
@@ -539,8 +525,6 @@ static const struct v4l2_queryctrl mt9t031_controls[] = {
 };
 
 static struct soc_camera_ops mt9t031_ops = {
-	.init			= mt9t031_init,
-	.release		= mt9t031_release,
 	.set_bus_param		= mt9t031_set_bus_param,
 	.query_bus_param	= mt9t031_query_bus_param,
 	.controls		= mt9t031_controls,
@@ -689,6 +673,7 @@ static int mt9t031_video_probe(struct i2c_client *client)
 	struct soc_camera_device *icd = client->dev.platform_data;
 	struct mt9t031 *mt9t031 = to_mt9t031(client);
 	s32 data;
+	int ret;
 
 	/* Enable the chip */
 	data = reg_write(client, MT9T031_CHIP_ENABLE, 1);
@@ -711,7 +696,11 @@ static int mt9t031_video_probe(struct i2c_client *client)
 
 	dev_info(&client->dev, "Detected a MT9T031 chip ID %x\n", data);
 
-	return 0;
+	ret = mt9t031_idle(client);
+	if (ret < 0)
+		dev_err(&client->dev, "Failed to initialise the camera\n");
+
+	return ret;
 }
 
 static struct v4l2_subdev_core_ops mt9t031_subdev_core_ops = {
diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c
index 35ea0ddd071..5c47b55823c 100644
--- a/drivers/media/video/mt9v022.c
+++ b/drivers/media/video/mt9v022.c
@@ -138,9 +138,8 @@ static int reg_clear(struct i2c_client *client, const u8 reg,
 	return reg_write(client, reg, ret & ~data);
 }
 
-static int mt9v022_init(struct soc_camera_device *icd)
+static int mt9v022_init(struct i2c_client *client)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
 	struct mt9v022 *mt9v022 = to_mt9v022(client);
 	int ret;
 
@@ -532,7 +531,6 @@ static const struct v4l2_queryctrl mt9v022_controls[] = {
 };
 
 static struct soc_camera_ops mt9v022_ops = {
-	.init			= mt9v022_init,
 	.set_bus_param		= mt9v022_set_bus_param,
 	.query_bus_param	= mt9v022_query_bus_param,
 	.controls		= mt9v022_controls,
@@ -751,6 +749,10 @@ static int mt9v022_video_probe(struct soc_camera_device *icd,
 		 data, mt9v022->model == V4L2_IDENT_MT9V022IX7ATM ?
 		 "monochrome" : "colour");
 
+	ret = mt9v022_init(client);
+	if (ret < 0)
+		dev_err(&client->dev, "Failed to initialise the camera\n");
+
 ei2c:
 	return ret;
 }
diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index 86e0648f65a..27921162514 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -385,12 +385,6 @@ static int soc_camera_open(struct file *file)
 			goto eiciadd;
 		}
 
-		if (icd->ops->init) {
-			ret = icd->ops->init(icd);
-			if (ret < 0)
-				goto einit;
-		}
-
 		/* Try to configure with default parameters */
 		ret = soc_camera_set_fmt(icf, &f);
 		if (ret < 0)
@@ -411,9 +405,6 @@ static int soc_camera_open(struct file *file)
 	 * and use_count == 1
 	 */
 esfmt:
-	if (icd->ops->release)
-		icd->ops->release(icd);
-einit:
 	ici->ops->remove(icd);
 eiciadd:
 	if (icl->power)
@@ -438,8 +429,6 @@ static int soc_camera_close(struct file *file)
 	if (!icd->use_count) {
 		struct soc_camera_link *icl = to_soc_camera_link(icd);
 
-		if (icd->ops->release)
-			icd->ops->release(icd);
 		ici->ops->remove(icd);
 		if (icl->power)
 			icl->power(icd->pdev, 0);
-- 
cgit v1.2.3


From 96c75399544838e1752001c8abdde36dd459cf8f Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 25 Aug 2009 11:53:23 -0300
Subject: V4L/DVB (12536): soc-camera: remove .gain and .exposure struct
 soc_camera_device members

This makes the soc-camera interface for V4L2 subdevices thinner yet. Handle
gain and exposure internally in each driver just like all other controls.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/mt9m001.c             | 43 +++++++++++++++++++----------
 drivers/media/video/mt9m111.c             | 29 +++++++++++++------
 drivers/media/video/mt9t031.c             | 37 ++++++++++++++++---------
 drivers/media/video/mt9v022.c             | 46 +++++++++++++++++++++++--------
 drivers/media/video/mx1_camera.c          |  3 +-
 drivers/media/video/ov772x.c              |  6 ++--
 drivers/media/video/pxa_camera.c          |  3 +-
 drivers/media/video/soc_camera.c          | 33 ++++++++--------------
 drivers/media/video/soc_camera_platform.c |  3 +-
 drivers/media/video/tw9910.c              |  3 +-
 10 files changed, 131 insertions(+), 75 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/mt9m001.c b/drivers/media/video/mt9m001.c
index 4b394798a29..45388d2ce2f 100644
--- a/drivers/media/video/mt9m001.c
+++ b/drivers/media/video/mt9m001.c
@@ -80,6 +80,8 @@ struct mt9m001 {
 	struct v4l2_rect rect;	/* Sensor window */
 	__u32 fourcc;
 	int model;	/* V4L2_IDENT_MT9M001* codes from v4l2-chip-ident.h */
+	unsigned int gain;
+	unsigned int exposure;
 	unsigned char autoexposure;
 };
 
@@ -129,8 +131,8 @@ static int mt9m001_init(struct i2c_client *client)
 	dev_dbg(&client->dev, "%s\n", __func__);
 
 	/*
-	 * We don't know, whether platform provides reset,
-	 * issue a soft reset too
+	 * We don't know, whether platform provides reset, issue a soft reset
+	 * too. This returns all registers to their default values.
 	 */
 	ret = reg_write(client, MT9M001_RESET, 1);
 	if (!ret)
@@ -200,6 +202,7 @@ static int mt9m001_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 	struct soc_camera_device *icd = client->dev.platform_data;
 	int ret;
 	const u16 hblank = 9, vblank = 25;
+	unsigned int total_h;
 
 	if (mt9m001->fourcc == V4L2_PIX_FMT_SBGGR8 ||
 	    mt9m001->fourcc == V4L2_PIX_FMT_SBGGR16)
@@ -219,6 +222,8 @@ static int mt9m001_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 	soc_camera_limit_side(&rect.top, &rect.height,
 		     MT9M001_ROW_SKIP, MT9M001_MIN_HEIGHT, MT9M001_MAX_HEIGHT);
 
+	total_h = rect.height + icd->y_skip_top + vblank;
+
 	/* Blanking and start values - default... */
 	ret = reg_write(client, MT9M001_HORIZONTAL_BLANKING, hblank);
 	if (!ret)
@@ -236,15 +241,13 @@ static int mt9m001_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 		ret = reg_write(client, MT9M001_WINDOW_HEIGHT,
 				rect.height + icd->y_skip_top - 1);
 	if (!ret && mt9m001->autoexposure) {
-		ret = reg_write(client, MT9M001_SHUTTER_WIDTH,
-				rect.height + icd->y_skip_top + vblank);
+		ret = reg_write(client, MT9M001_SHUTTER_WIDTH, total_h);
 		if (!ret) {
 			const struct v4l2_queryctrl *qctrl =
 				soc_camera_find_qctrl(icd->ops,
 						      V4L2_CID_EXPOSURE);
-			icd->exposure = (524 + (rect.height + icd->y_skip_top +
-						vblank - 1) *
-					 (qctrl->maximum - qctrl->minimum)) /
+			mt9m001->exposure = (524 + (total_h - 1) *
+				 (qctrl->maximum - qctrl->minimum)) /
 				1048 + qctrl->minimum;
 		}
 	}
@@ -457,6 +460,12 @@ static int mt9m001_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 	case V4L2_CID_EXPOSURE_AUTO:
 		ctrl->value = mt9m001->autoexposure;
 		break;
+	case V4L2_CID_GAIN:
+		ctrl->value = mt9m001->gain;
+		break;
+	case V4L2_CID_EXPOSURE:
+		ctrl->value = mt9m001->exposure;
+		break;
 	}
 	return 0;
 }
@@ -518,7 +527,7 @@ static int mt9m001_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 		}
 
 		/* Success */
-		icd->gain = ctrl->value;
+		mt9m001->gain = ctrl->value;
 		break;
 	case V4L2_CID_EXPOSURE:
 		/* mt9m001 has maximum == default */
@@ -535,21 +544,21 @@ static int mt9m001_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 				shutter);
 			if (reg_write(client, MT9M001_SHUTTER_WIDTH, shutter) < 0)
 				return -EIO;
-			icd->exposure = ctrl->value;
+			mt9m001->exposure = ctrl->value;
 			mt9m001->autoexposure = 0;
 		}
 		break;
 	case V4L2_CID_EXPOSURE_AUTO:
 		if (ctrl->value) {
 			const u16 vblank = 25;
+			unsigned int total_h = mt9m001->rect.height +
+				icd->y_skip_top + vblank;
 			if (reg_write(client, MT9M001_SHUTTER_WIDTH,
-				      mt9m001->rect.height +
-				      icd->y_skip_top + vblank) < 0)
+				      total_h) < 0)
 				return -EIO;
 			qctrl = soc_camera_find_qctrl(icd->ops, V4L2_CID_EXPOSURE);
-			icd->exposure = (524 + (mt9m001->rect.height +
-						icd->y_skip_top + vblank - 1) *
-					 (qctrl->maximum - qctrl->minimum)) /
+			mt9m001->exposure = (524 + (total_h - 1) *
+				 (qctrl->maximum - qctrl->minimum)) /
 				1048 + qctrl->minimum;
 			mt9m001->autoexposure = 1;
 		} else
@@ -629,6 +638,10 @@ static int mt9m001_video_probe(struct soc_camera_device *icd,
 	if (ret < 0)
 		dev_err(&client->dev, "Failed to initialise the camera\n");
 
+	/* mt9m001_init() has reset the chip, returning registers to defaults */
+	mt9m001->gain = 64;
+	mt9m001->exposure = 255;
+
 	return ret;
 }
 
@@ -701,7 +714,7 @@ static int mt9m001_probe(struct i2c_client *client,
 
 	/* Second stage probe - when a capture adapter is there */
 	icd->ops		= &mt9m001_ops;
-	icd->y_skip_top		= 1;
+	icd->y_skip_top		= 0;
 
 	mt9m001->rect.left	= MT9M001_COLUMN_SKIP;
 	mt9m001->rect.top	= MT9M001_ROW_SKIP;
diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c
index 186902f9be2..90da699601e 100644
--- a/drivers/media/video/mt9m111.c
+++ b/drivers/media/video/mt9m111.c
@@ -153,6 +153,7 @@ struct mt9m111 {
 	enum mt9m111_context context;
 	struct v4l2_rect rect;
 	u32 pixfmt;
+	unsigned int gain;
 	unsigned char autoexposure;
 	unsigned char datawidth;
 	unsigned int powered:1;
@@ -513,7 +514,8 @@ static int mt9m111_set_pixfmt(struct i2c_client *client, u32 pixfmt)
 		ret = mt9m111_setfmt_yuv(client);
 		break;
 	default:
-		dev_err(&client->dev, "Pixel format not handled : %x\n", pixfmt);
+		dev_err(&client->dev, "Pixel format not handled : %x\n",
+			pixfmt);
 		ret = -EINVAL;
 	}
 
@@ -536,9 +538,9 @@ static int mt9m111_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
 	};
 	int ret;
 
-	dev_dbg(&client->dev, "%s fmt=%x left=%d, top=%d, width=%d, height=%d\n",
-		__func__, pix->pixelformat, rect.left, rect.top, rect.width,
-		rect.height);
+	dev_dbg(&client->dev,
+		"%s fmt=%x left=%d, top=%d, width=%d, height=%d\n", __func__,
+		pix->pixelformat, rect.left, rect.top, rect.width, rect.height);
 
 	ret = mt9m111_make_rect(client, &rect);
 	if (!ret)
@@ -672,8 +674,10 @@ static const struct v4l2_queryctrl mt9m111_controls[] = {
 };
 
 static int mt9m111_resume(struct soc_camera_device *icd);
+static int mt9m111_suspend(struct soc_camera_device *icd, pm_message_t state);
 
 static struct soc_camera_ops mt9m111_ops = {
+	.suspend		= mt9m111_suspend,
 	.resume			= mt9m111_resume,
 	.query_bus_param	= mt9m111_query_bus_param,
 	.set_bus_param		= mt9m111_set_bus_param,
@@ -714,13 +718,13 @@ static int mt9m111_get_global_gain(struct i2c_client *client)
 
 static int mt9m111_set_global_gain(struct i2c_client *client, int gain)
 {
-	struct soc_camera_device *icd = client->dev.platform_data;
+	struct mt9m111 *mt9m111 = to_mt9m111(client);
 	u16 val;
 
 	if (gain > 63 * 2 * 2)
 		return -EINVAL;
 
-	icd->gain = gain;
+	mt9m111->gain = gain;
 	if ((gain >= 64 * 2) && (gain < 63 * 2 * 2))
 		val = (1 << 10) | (1 << 9) | (gain / 4);
 	else if ((gain >= 64) && (gain < 64 * 2))
@@ -844,17 +848,26 @@ static int mt9m111_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 	return ret;
 }
 
+static int mt9m111_suspend(struct soc_camera_device *icd, pm_message_t state)
+{
+	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
+	struct mt9m111 *mt9m111 = to_mt9m111(client);
+
+	mt9m111->gain = mt9m111_get_global_gain(client);
+
+	return 0;
+}
+
 static int mt9m111_restore_state(struct i2c_client *client)
 {
 	struct mt9m111 *mt9m111 = to_mt9m111(client);
-	struct soc_camera_device *icd = client->dev.platform_data;
 
 	mt9m111_set_context(client, mt9m111->context);
 	mt9m111_set_pixfmt(client, mt9m111->pixfmt);
 	mt9m111_setup_rect(client, &mt9m111->rect);
 	mt9m111_set_flip(client, mt9m111->hflip, MT9M111_RMB_MIRROR_COLS);
 	mt9m111_set_flip(client, mt9m111->vflip, MT9M111_RMB_MIRROR_ROWS);
-	mt9m111_set_global_gain(client, icd->gain);
+	mt9m111_set_global_gain(client, mt9m111->gain);
 	mt9m111_set_autoexposure(client, mt9m111->autoexposure);
 	mt9m111_set_autowhitebalance(client, mt9m111->autowhitebalance);
 	return 0;
diff --git a/drivers/media/video/mt9t031.c b/drivers/media/video/mt9t031.c
index 9a648968938..6966f644977 100644
--- a/drivers/media/video/mt9t031.c
+++ b/drivers/media/video/mt9t031.c
@@ -73,6 +73,8 @@ struct mt9t031 {
 	int model;	/* V4L2_IDENT_MT9T031* codes from v4l2-chip-ident.h */
 	u16 xskip;
 	u16 yskip;
+	unsigned int gain;
+	unsigned int exposure;
 	unsigned char autoexposure;
 };
 
@@ -301,16 +303,15 @@ static int mt9t031_set_params(struct soc_camera_device *icd,
 		ret = reg_write(client, MT9T031_WINDOW_HEIGHT,
 				rect->height + icd->y_skip_top - 1);
 	if (ret >= 0 && mt9t031->autoexposure) {
-		ret = set_shutter(client,
-				  rect->height + icd->y_skip_top + vblank);
+		unsigned int total_h = rect->height + icd->y_skip_top + vblank;
+		ret = set_shutter(client, total_h);
 		if (ret >= 0) {
 			const u32 shutter_max = MT9T031_MAX_HEIGHT + vblank;
 			const struct v4l2_queryctrl *qctrl =
 				soc_camera_find_qctrl(icd->ops,
 						      V4L2_CID_EXPOSURE);
-			icd->exposure = (shutter_max / 2 + (rect->height +
-					 icd->y_skip_top + vblank - 1) *
-					 (qctrl->maximum - qctrl->minimum)) /
+			mt9t031->exposure = (shutter_max / 2 + (total_h - 1) *
+				 (qctrl->maximum - qctrl->minimum)) /
 				shutter_max + qctrl->minimum;
 		}
 	}
@@ -553,6 +554,12 @@ static int mt9t031_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 	case V4L2_CID_EXPOSURE_AUTO:
 		ctrl->value = mt9t031->autoexposure;
 		break;
+	case V4L2_CID_GAIN:
+		ctrl->value = mt9t031->gain;
+		break;
+	case V4L2_CID_EXPOSURE:
+		ctrl->value = mt9t031->exposure;
+		break;
 	}
 	return 0;
 }
@@ -624,7 +631,7 @@ static int mt9t031_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 		}
 
 		/* Success */
-		icd->gain = ctrl->value;
+		mt9t031->gain = ctrl->value;
 		break;
 	case V4L2_CID_EXPOSURE:
 		/* mt9t031 has maximum == default */
@@ -641,7 +648,7 @@ static int mt9t031_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 				old, shutter);
 			if (set_shutter(client, shutter) < 0)
 				return -EIO;
-			icd->exposure = ctrl->value;
+			mt9t031->exposure = ctrl->value;
 			mt9t031->autoexposure = 0;
 		}
 		break;
@@ -649,14 +656,14 @@ static int mt9t031_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 		if (ctrl->value) {
 			const u16 vblank = MT9T031_VERTICAL_BLANK;
 			const u32 shutter_max = MT9T031_MAX_HEIGHT + vblank;
-			if (set_shutter(client, mt9t031->rect.height +
-					icd->y_skip_top + vblank) < 0)
+			unsigned int total_h = mt9t031->rect.height +
+				icd->y_skip_top + vblank;
+
+			if (set_shutter(client, total_h) < 0)
 				return -EIO;
 			qctrl = soc_camera_find_qctrl(icd->ops, V4L2_CID_EXPOSURE);
-			icd->exposure = (shutter_max / 2 +
-					 (mt9t031->rect.height +
-					  icd->y_skip_top + vblank - 1) *
-					 (qctrl->maximum - qctrl->minimum)) /
+			mt9t031->exposure = (shutter_max / 2 + (total_h - 1) *
+				 (qctrl->maximum - qctrl->minimum)) /
 				shutter_max + qctrl->minimum;
 			mt9t031->autoexposure = 1;
 		} else
@@ -700,6 +707,10 @@ static int mt9t031_video_probe(struct i2c_client *client)
 	if (ret < 0)
 		dev_err(&client->dev, "Failed to initialise the camera\n");
 
+	/* mt9t031_idle() has reset the chip to default. */
+	mt9t031->exposure = 255;
+	mt9t031->gain = 64;
+
 	return ret;
 }
 
diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c
index 5c47b55823c..995607f9d3b 100644
--- a/drivers/media/video/mt9v022.c
+++ b/drivers/media/video/mt9v022.c
@@ -45,7 +45,7 @@ MODULE_PARM_DESC(sensor_type, "Sensor type: \"colour\" or \"monochrome\"");
 #define MT9V022_PIXEL_OPERATION_MODE	0x0f
 #define MT9V022_LED_OUT_CONTROL		0x1b
 #define MT9V022_ADC_MODE_CONTROL	0x1c
-#define MT9V022_ANALOG_GAIN		0x34
+#define MT9V022_ANALOG_GAIN		0x35
 #define MT9V022_BLACK_LEVEL_CALIB_CTRL	0x47
 #define MT9V022_PIXCLK_FV_LV		0x74
 #define MT9V022_DIGITAL_TEST_PATTERN	0x7f
@@ -155,6 +155,10 @@ static int mt9v022_init(struct i2c_client *client)
 	if (!ret)
 		/* AEC, AGC on */
 		ret = reg_set(client, MT9V022_AEC_AGC_ENABLE, 0x3);
+	if (!ret)
+		ret = reg_write(client, MT9V022_ANALOG_GAIN, 16);
+	if (!ret)
+		ret = reg_write(client, MT9V022_TOTAL_SHUTTER_WIDTH, 480);
 	if (!ret)
 		ret = reg_write(client, MT9V022_MAX_TOTAL_SHUTTER_WIDTH, 480);
 	if (!ret)
@@ -540,8 +544,12 @@ static struct soc_camera_ops mt9v022_ops = {
 static int mt9v022_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 {
 	struct i2c_client *client = sd->priv;
+	const struct v4l2_queryctrl *qctrl;
+	unsigned long range;
 	int data;
 
+	qctrl = soc_camera_find_qctrl(&mt9v022_ops, ctrl->id);
+
 	switch (ctrl->id) {
 	case V4L2_CID_VFLIP:
 		data = reg_read(client, MT9V022_READ_MODE);
@@ -566,6 +574,24 @@ static int mt9v022_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 		if (data < 0)
 			return -EIO;
 		ctrl->value = !!(data & 0x2);
+		break;
+	case V4L2_CID_GAIN:
+		data = reg_read(client, MT9V022_ANALOG_GAIN);
+		if (data < 0)
+			return -EIO;
+
+		range = qctrl->maximum - qctrl->minimum;
+		ctrl->value = ((data - 16) * range + 24) / 48 + qctrl->minimum;
+
+		break;
+	case V4L2_CID_EXPOSURE:
+		data = reg_read(client, MT9V022_TOTAL_SHUTTER_WIDTH);
+		if (data < 0)
+			return -EIO;
+
+		range = qctrl->maximum - qctrl->minimum;
+		ctrl->value = ((data - 1) * range + 239) / 479 + qctrl->minimum;
+
 		break;
 	}
 	return 0;
@@ -575,7 +601,6 @@ static int mt9v022_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 {
 	int data;
 	struct i2c_client *client = sd->priv;
-	struct soc_camera_device *icd = client->dev.platform_data;
 	const struct v4l2_queryctrl *qctrl;
 
 	qctrl = soc_camera_find_qctrl(&mt9v022_ops, ctrl->id);
@@ -605,12 +630,9 @@ static int mt9v022_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 			return -EINVAL;
 		else {
 			unsigned long range = qctrl->maximum - qctrl->minimum;
-			/* Datasheet says 16 to 64. autogain only works properly
-			 * after setting gain to maximum 14. Larger values
-			 * produce "white fly" noise effect. On the whole,
-			 * manually setting analog gain does no good. */
+			/* Valid values 16 to 64, 32 to 64 must be even. */
 			unsigned long gain = ((ctrl->value - qctrl->minimum) *
-					      10 + range / 2) / range + 4;
+					      48 + range / 2) / range + 16;
 			if (gain >= 32)
 				gain &= ~1;
 			/* The user wants to set gain manually, hope, she
@@ -619,11 +641,10 @@ static int mt9v022_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 			if (reg_clear(client, MT9V022_AEC_AGC_ENABLE, 0x2) < 0)
 				return -EIO;
 
-			dev_info(&client->dev, "Setting gain from %d to %lu\n",
-				 reg_read(client, MT9V022_ANALOG_GAIN), gain);
+			dev_dbg(&client->dev, "Setting gain from %d to %lu\n",
+				reg_read(client, MT9V022_ANALOG_GAIN), gain);
 			if (reg_write(client, MT9V022_ANALOG_GAIN, gain) < 0)
 				return -EIO;
-			icd->gain = ctrl->value;
 		}
 		break;
 	case V4L2_CID_EXPOSURE:
@@ -646,7 +667,6 @@ static int mt9v022_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 			if (reg_write(client, MT9V022_TOTAL_SHUTTER_WIDTH,
 				      shutter) < 0)
 				return -EIO;
-			icd->exposure = ctrl->value;
 		}
 		break;
 	case V4L2_CID_AUTOGAIN:
@@ -827,6 +847,10 @@ static int mt9v022_probe(struct i2c_client *client,
 	mt9v022->chip_control = MT9V022_CHIP_CONTROL_DEFAULT;
 
 	icd->ops		= &mt9v022_ops;
+	/*
+	 * MT9V022 _really_ corrupts the first read out line.
+	 * TODO: verify on i.MX31
+	 */
 	icd->y_skip_top		= 1;
 
 	mt9v022->rect.left	= MT9V022_COLUMN_SKIP;
diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c
index 3875483ab9d..5f37952c75c 100644
--- a/drivers/media/video/mx1_camera.c
+++ b/drivers/media/video/mx1_camera.c
@@ -548,7 +548,8 @@ static int mx1_camera_set_fmt(struct soc_camera_device *icd,
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
 	if (!xlate) {
-		dev_warn(icd->dev.parent, "Format %x not found\n", pix->pixelformat);
+		dev_warn(icd->dev.parent, "Format %x not found\n",
+			 pix->pixelformat);
 		return -EINVAL;
 	}
 
diff --git a/drivers/media/video/ov772x.c b/drivers/media/video/ov772x.c
index 776a91dcfbe..eccb40ab7fe 100644
--- a/drivers/media/video/ov772x.c
+++ b/drivers/media/video/ov772x.c
@@ -404,7 +404,8 @@ struct ov772x_priv {
 	int                               model;
 	unsigned short                    flag_vflip:1;
 	unsigned short                    flag_hflip:1;
-	unsigned short                    band_filter;	/* 256 - BDBASE, 0 if (!COM8[5]) */
+	/* band_filter = COM8[5] ? 256 - BDBASE : 0 */
+	unsigned short                    band_filter;
 };
 
 #define ENDMARKER { 0xff, 0xff }
@@ -587,7 +588,8 @@ static const struct v4l2_queryctrl ov772x_controls[] = {
 
 static struct ov772x_priv *to_ov772x(const struct i2c_client *client)
 {
-	return container_of(i2c_get_clientdata(client), struct ov772x_priv, subdev);
+	return container_of(i2c_get_clientdata(client), struct ov772x_priv,
+			    subdev);
 }
 
 static int ov772x_write_array(struct i2c_client        *client,
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
index a19bb76e175..6952e9602d5 100644
--- a/drivers/media/video/pxa_camera.c
+++ b/drivers/media/video/pxa_camera.c
@@ -274,7 +274,8 @@ static void free_buffer(struct videobuf_queue *vq, struct pxa_buffer *buf)
 
 	for (i = 0; i < ARRAY_SIZE(buf->dmas); i++) {
 		if (buf->dmas[i].sg_cpu)
-			dma_free_coherent(ici->v4l2_dev.dev, buf->dmas[i].sg_size,
+			dma_free_coherent(ici->v4l2_dev.dev,
+					  buf->dmas[i].sg_size,
 					  buf->dmas[i].sg_cpu,
 					  buf->dmas[i].sg_dma);
 		buf->dmas[i].sg_cpu = NULL;
diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index 27921162514..e8248ba0c03 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -327,7 +327,9 @@ static int soc_camera_set_fmt(struct soc_camera_file *icf,
 static int soc_camera_open(struct file *file)
 {
 	struct video_device *vdev = video_devdata(file);
-	struct soc_camera_device *icd = container_of(vdev->parent, struct soc_camera_device, dev);
+	struct soc_camera_device *icd = container_of(vdev->parent,
+						     struct soc_camera_device,
+						     dev);
 	struct soc_camera_link *icl = to_soc_camera_link(icd);
 	struct soc_camera_host *ici;
 	struct soc_camera_file *icf;
@@ -349,7 +351,10 @@ static int soc_camera_open(struct file *file)
 		goto emgi;
 	}
 
-	/* Protect against icd->ops->remove() until we module_get() both drivers. */
+	/*
+	 * Protect against icd->ops->remove() until we module_get() both
+	 * drivers.
+	 */
 	mutex_lock(&icd->video_lock);
 
 	icf->icd = icd;
@@ -670,19 +675,6 @@ static int soc_camera_g_ctrl(struct file *file, void *priv,
 
 	WARN_ON(priv != file->private_data);
 
-	switch (ctrl->id) {
-	case V4L2_CID_GAIN:
-		if (icd->gain == (unsigned short)~0)
-			return -EINVAL;
-		ctrl->value = icd->gain;
-		return 0;
-	case V4L2_CID_EXPOSURE:
-		if (icd->exposure == (unsigned short)~0)
-			return -EINVAL;
-		ctrl->value = icd->exposure;
-		return 0;
-	}
-
 	if (ici->ops->get_ctrl) {
 		ret = ici->ops->get_ctrl(icd, ctrl);
 		if (ret != -ENOIOCTLCMD)
@@ -944,7 +936,10 @@ static int soc_camera_probe(struct device *dev)
 		if (ret < 0)
 			goto eadddev;
 
-		/* FIXME: this is racy, have to use driver-binding notification */
+		/*
+		 * FIXME: this is racy, have to use driver-binding notification,
+		 * when it is available
+		 */
 		control = to_soc_camera_control(icd);
 		if (!control || !control->driver || !dev_get_drvdata(control) ||
 		    !try_module_get(control->driver->owner)) {
@@ -1279,7 +1274,6 @@ static int video_dev_create(struct soc_camera_device *icd)
  */
 static int soc_camera_video_start(struct soc_camera_device *icd)
 {
-	const struct v4l2_queryctrl *qctrl;
 	int ret;
 
 	if (!icd->dev.parent)
@@ -1297,11 +1291,6 @@ static int soc_camera_video_start(struct soc_camera_device *icd)
 		return ret;
 	}
 
-	qctrl = soc_camera_find_qctrl(icd->ops, V4L2_CID_GAIN);
-	icd->gain = qctrl ? qctrl->default_value : (unsigned short)~0;
-	qctrl = soc_camera_find_qctrl(icd->ops, V4L2_CID_EXPOSURE);
-	icd->exposure = qctrl ? qctrl->default_value : (unsigned short)~0;
-
 	return 0;
 }
 
diff --git a/drivers/media/video/soc_camera_platform.c b/drivers/media/video/soc_camera_platform.c
index 3825c358172..1b6dd02a801 100644
--- a/drivers/media/video/soc_camera_platform.c
+++ b/drivers/media/video/soc_camera_platform.c
@@ -33,7 +33,8 @@ static struct soc_camera_platform_priv *get_priv(struct platform_device *pdev)
 
 static struct soc_camera_platform_info *get_info(struct soc_camera_device *icd)
 {
-	struct platform_device *pdev = to_platform_device(to_soc_camera_control(icd));
+	struct platform_device *pdev =
+		to_platform_device(to_soc_camera_control(icd));
 	return pdev->dev.platform_data;
 }
 
diff --git a/drivers/media/video/tw9910.c b/drivers/media/video/tw9910.c
index fbf4130dfc5..269ab044072 100644
--- a/drivers/media/video/tw9910.c
+++ b/drivers/media/video/tw9910.c
@@ -357,7 +357,8 @@ static const struct tw9910_hsync_ctrl tw9910_hsync_ctrl = {
  */
 static struct tw9910_priv *to_tw9910(const struct i2c_client *client)
 {
-	return container_of(i2c_get_clientdata(client), struct tw9910_priv, subdev);
+	return container_of(i2c_get_clientdata(client), struct tw9910_priv,
+			    subdev);
 }
 
 static int tw9910_set_scale(struct i2c_client *client,
-- 
cgit v1.2.3


From 0da2808ca27ab7f65346d4d191569c669db8f628 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Sat, 29 Aug 2009 17:36:50 -0300
Subject: V4L/DVB (12580): soc-camera: remove now unneeded subdevice group ID
 assignments

Since we are not using v4l2_device_call_* calls any more, we don't need to
initialise subdevice .grp_id any more. This also fixes compiler warnings on
64-bit platforms.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/soc_camera.c          | 1 -
 drivers/media/video/soc_camera_platform.c | 1 -
 2 files changed, 2 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index e8248ba0c03..59aa7a3694c 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -856,7 +856,6 @@ static int soc_camera_init_i2c(struct soc_camera_device *icd,
 		goto ei2cnd;
 	}
 
-	subdev->grp_id = (__u32)icd;
 	client = subdev->priv;
 
 	/* Use to_i2c_client(dev) to recover the i2c client */
diff --git a/drivers/media/video/soc_camera_platform.c b/drivers/media/video/soc_camera_platform.c
index 1b6dd02a801..b6a575ce5da 100644
--- a/drivers/media/video/soc_camera_platform.c
+++ b/drivers/media/video/soc_camera_platform.c
@@ -137,7 +137,6 @@ static int soc_camera_platform_probe(struct platform_device *pdev)
 
 	v4l2_subdev_init(&priv->subdev, &platform_subdev_ops);
 	v4l2_set_subdevdata(&priv->subdev, p);
-	priv->subdev.grp_id = (__u32)icd;
 	strncpy(priv->subdev.name, dev_name(&pdev->dev), V4L2_SUBDEV_NAME_SIZE);
 
 	ret = v4l2_device_register_subdev(&ici->v4l2_dev, &priv->subdev);
-- 
cgit v1.2.3


From 53dacb15705901e14b03dcba27e40364fedd9d09 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Mon, 10 Aug 2009 02:49:08 -0300
Subject: V4L/DVB (12540): v4l: simplify v4l2_i2c_new_subdev and friends

Rewrite v4l2_i2c_new_subdev as a simplified version of v4l2_i2c_new_subdev_cfg
and remove v4l2_i2c_new_probed_subdev and v4l2_i2c_new_probed_subdev_addr.

This simplifies this API substantially.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/au0828/au0828-cards.c     |   4 +-
 drivers/media/video/bt8xx/bttv-cards.c        |  44 ++++-----
 drivers/media/video/cafe_ccic.c               |   2 +-
 drivers/media/video/cx18/cx18-i2c.c           |  14 +--
 drivers/media/video/cx231xx/cx231xx-cards.c   |   4 +-
 drivers/media/video/cx23885/cx23885-cards.c   |   2 +-
 drivers/media/video/cx23885/cx23885-video.c   |   6 +-
 drivers/media/video/cx88/cx88-cards.c         |  14 +--
 drivers/media/video/cx88/cx88-video.c         |   6 +-
 drivers/media/video/davinci/vpif_display.c    |   4 +-
 drivers/media/video/em28xx/em28xx-cards.c     |  30 +++---
 drivers/media/video/ivtv/ivtv-i2c.c           |  18 ++--
 drivers/media/video/mxb.c                     |  14 +--
 drivers/media/video/pvrusb2/pvrusb2-hdw.c     |  10 +-
 drivers/media/video/saa7134/saa7134-cards.c   |  12 +--
 drivers/media/video/saa7134/saa7134-core.c    |   6 +-
 drivers/media/video/usbvision/usbvision-i2c.c |  12 +--
 drivers/media/video/v4l2-common.c             | 133 --------------------------
 drivers/media/video/vino.c                    |   8 +-
 drivers/media/video/w9968cf.c                 |   4 +-
 drivers/media/video/zoran/zoran_card.c        |   8 +-
 21 files changed, 111 insertions(+), 244 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c
index 830c4a933f6..57dd9195daf 100644
--- a/drivers/media/video/au0828/au0828-cards.c
+++ b/drivers/media/video/au0828/au0828-cards.c
@@ -212,7 +212,7 @@ void au0828_card_setup(struct au0828_dev *dev)
 		   be abstracted out if we ever need to support a different
 		   demod) */
 		sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
-				"au8522", "au8522", 0x8e >> 1);
+				"au8522", "au8522", 0x8e >> 1, NULL);
 		if (sd == NULL)
 			printk(KERN_ERR "analog subdev registration failed\n");
 	}
@@ -221,7 +221,7 @@ void au0828_card_setup(struct au0828_dev *dev)
 	if (dev->board.tuner_type != TUNER_ABSENT) {
 		/* Load the tuner module, which does the attach */
 		sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
-				"tuner", "tuner", dev->board.tuner_addr);
+				"tuner", "tuner", dev->board.tuner_addr, NULL);
 		if (sd == NULL)
 			printk(KERN_ERR "tuner subdev registration fail\n");
 
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index b42251fa96b..12279f6d9bc 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -3524,8 +3524,8 @@ void __devinit bttv_init_card2(struct bttv *btv)
 		};
 		struct v4l2_subdev *sd;
 
-		sd = v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
-			&btv->c.i2c_adap, "saa6588", "saa6588", addrs);
+		sd = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
+			&btv->c.i2c_adap, "saa6588", "saa6588", 0, addrs);
 		btv->has_saa6588 = (sd != NULL);
 	}
 
@@ -3549,8 +3549,8 @@ void __devinit bttv_init_card2(struct bttv *btv)
 			I2C_CLIENT_END
 		};
 
-		btv->sd_msp34xx = v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
-			&btv->c.i2c_adap, "msp3400", "msp3400", addrs);
+		btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
+			&btv->c.i2c_adap, "msp3400", "msp3400", 0, addrs);
 		if (btv->sd_msp34xx)
 			return;
 		goto no_audio;
@@ -3563,16 +3563,16 @@ void __devinit bttv_init_card2(struct bttv *btv)
 			I2C_CLIENT_END
 		};
 
-		if (v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
-				&btv->c.i2c_adap, "tda7432", "tda7432", addrs))
+		if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
+				&btv->c.i2c_adap, "tda7432", "tda7432", 0, addrs))
 			return;
 		goto no_audio;
 	}
 
 	case 3: {
 		/* The user specified that we should probe for tvaudio */
-		btv->sd_tvaudio = v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
-			&btv->c.i2c_adap, "tvaudio", "tvaudio", tvaudio_addrs());
+		btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
+			&btv->c.i2c_adap, "tvaudio", "tvaudio", 0, tvaudio_addrs());
 		if (btv->sd_tvaudio)
 			return;
 		goto no_audio;
@@ -3591,13 +3591,13 @@ void __devinit bttv_init_card2(struct bttv *btv)
 	   it really is a msp3400, so it will return NULL when the device
 	   found is really something else (e.g. a tea6300). */
 	if (!bttv_tvcards[btv->c.type].no_msp34xx) {
-		btv->sd_msp34xx = v4l2_i2c_new_probed_subdev_addr(&btv->c.v4l2_dev,
+		btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
 			&btv->c.i2c_adap, "msp3400", "msp3400",
-			I2C_ADDR_MSP3400 >> 1);
+			0, I2C_ADDRS(I2C_ADDR_MSP3400 >> 1));
 	} else if (bttv_tvcards[btv->c.type].msp34xx_alt) {
-		btv->sd_msp34xx = v4l2_i2c_new_probed_subdev_addr(&btv->c.v4l2_dev,
+		btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
 			&btv->c.i2c_adap, "msp3400", "msp3400",
-			I2C_ADDR_MSP3400_ALT >> 1);
+			0, I2C_ADDRS(I2C_ADDR_MSP3400_ALT >> 1));
 	}
 
 	/* If we found a msp34xx, then we're done. */
@@ -3611,14 +3611,14 @@ void __devinit bttv_init_card2(struct bttv *btv)
 			I2C_CLIENT_END
 		};
 
-		if (v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
-				&btv->c.i2c_adap, "tda7432", "tda7432", addrs))
+		if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
+				&btv->c.i2c_adap, "tda7432", "tda7432", 0, addrs))
 			return;
 	}
 
 	/* Now see if we can find one of the tvaudio devices. */
-	btv->sd_tvaudio = v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
-		&btv->c.i2c_adap, "tvaudio", "tvaudio", tvaudio_addrs());
+	btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
+		&btv->c.i2c_adap, "tvaudio", "tvaudio", 0, tvaudio_addrs());
 	if (btv->sd_tvaudio)
 		return;
 
@@ -3641,15 +3641,15 @@ void __devinit bttv_init_tuner(struct bttv *btv)
 
 		/* Load tuner module before issuing tuner config call! */
 		if (bttv_tvcards[btv->c.type].has_radio)
-			v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
+			v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
 				&btv->c.i2c_adap, "tuner", "tuner",
-				v4l2_i2c_tuner_addrs(ADDRS_RADIO));
-		v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
+				0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
+		v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
 				&btv->c.i2c_adap, "tuner", "tuner",
-				v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
-		v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
+				0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
+		v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
 				&btv->c.i2c_adap, "tuner", "tuner",
-				v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
+				0, v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
 
 		tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
 		tun_setup.type = btv->tuner_type;
diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c
index 9c149a78129..657c481d255 100644
--- a/drivers/media/video/cafe_ccic.c
+++ b/drivers/media/video/cafe_ccic.c
@@ -1955,7 +1955,7 @@ static int cafe_pci_probe(struct pci_dev *pdev,
 
 	cam->sensor_addr = 0x42;
 	cam->sensor = v4l2_i2c_new_subdev(&cam->v4l2_dev, &cam->i2c_adapter,
-			"ov7670", "ov7670", cam->sensor_addr);
+			"ov7670", "ov7670", cam->sensor_addr, NULL);
 	if (cam->sensor == NULL) {
 		ret = -ENODEV;
 		goto out_smbus;
diff --git a/drivers/media/video/cx18/cx18-i2c.c b/drivers/media/video/cx18/cx18-i2c.c
index dbbf93d2eee..2477461e84d 100644
--- a/drivers/media/video/cx18/cx18-i2c.c
+++ b/drivers/media/video/cx18/cx18-i2c.c
@@ -139,16 +139,16 @@ int cx18_i2c_register(struct cx18 *cx, unsigned idx)
 
 	if (hw == CX18_HW_TUNER) {
 		/* special tuner group handling */
-		sd = v4l2_i2c_new_probed_subdev(&cx->v4l2_dev,
-				adap, mod, type, cx->card_i2c->radio);
+		sd = v4l2_i2c_new_subdev(&cx->v4l2_dev,
+				adap, mod, type, 0, cx->card_i2c->radio);
 		if (sd != NULL)
 			sd->grp_id = hw;
-		sd = v4l2_i2c_new_probed_subdev(&cx->v4l2_dev,
-				adap, mod, type, cx->card_i2c->demod);
+		sd = v4l2_i2c_new_subdev(&cx->v4l2_dev,
+				adap, mod, type, 0, cx->card_i2c->demod);
 		if (sd != NULL)
 			sd->grp_id = hw;
-		sd = v4l2_i2c_new_probed_subdev(&cx->v4l2_dev,
-				adap, mod, type, cx->card_i2c->tv);
+		sd = v4l2_i2c_new_subdev(&cx->v4l2_dev,
+				adap, mod, type, 0, cx->card_i2c->tv);
 		if (sd != NULL)
 			sd->grp_id = hw;
 		return sd != NULL ? 0 : -1;
@@ -162,7 +162,7 @@ int cx18_i2c_register(struct cx18 *cx, unsigned idx)
 		return -1;
 
 	/* It's an I2C device other than an analog tuner or IR chip */
-	sd = v4l2_i2c_new_subdev(&cx->v4l2_dev, adap, mod, type, hw_addrs[idx]);
+	sd = v4l2_i2c_new_subdev(&cx->v4l2_dev, adap, mod, type, hw_addrs[idx], NULL);
 	if (sd != NULL)
 		sd->grp_id = hw;
 	return sd != NULL ? 0 : -1;
diff --git a/drivers/media/video/cx231xx/cx231xx-cards.c b/drivers/media/video/cx231xx/cx231xx-cards.c
index 63d2239fd32..319c459459e 100644
--- a/drivers/media/video/cx231xx/cx231xx-cards.c
+++ b/drivers/media/video/cx231xx/cx231xx-cards.c
@@ -313,7 +313,7 @@ void cx231xx_card_setup(struct cx231xx *dev)
 	if (dev->board.decoder == CX231XX_AVDECODER) {
 		dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
 					&dev->i2c_bus[0].i2c_adap,
-					"cx25840", "cx25840", 0x88 >> 1);
+					"cx25840", "cx25840", 0x88 >> 1, NULL);
 		if (dev->sd_cx25840 == NULL)
 			cx231xx_info("cx25840 subdev registration failure\n");
 		cx25840_call(dev, core, load_fw);
@@ -323,7 +323,7 @@ void cx231xx_card_setup(struct cx231xx *dev)
 	if (dev->board.tuner_type != TUNER_ABSENT) {
 		dev->sd_tuner =	v4l2_i2c_new_subdev(&dev->v4l2_dev,
 				&dev->i2c_bus[1].i2c_adap,
-				"tuner", "tuner", 0xc2 >> 1);
+				"tuner", "tuner", 0xc2 >> 1, NULL);
 		if (dev->sd_tuner == NULL)
 			cx231xx_info("tuner subdev registration failure\n");
 
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index 3143d85ef31..02ba4aec7d9 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -929,7 +929,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
 		dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
 				&dev->i2c_bus[2].i2c_adap,
-				"cx25840", "cx25840", 0x88 >> 1);
+				"cx25840", "cx25840", 0x88 >> 1, NULL);
 		v4l2_subdev_call(dev->sd_cx25840, core, load_fw);
 		break;
 	}
diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c
index 5d609333630..654cc253cd5 100644
--- a/drivers/media/video/cx23885/cx23885-video.c
+++ b/drivers/media/video/cx23885/cx23885-video.c
@@ -1521,11 +1521,11 @@ int cx23885_video_register(struct cx23885_dev *dev)
 		if (dev->tuner_addr)
 			sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
 				&dev->i2c_bus[1].i2c_adap,
-				"tuner", "tuner", dev->tuner_addr);
+				"tuner", "tuner", dev->tuner_addr, NULL);
 		else
-			sd = v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
+			sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
 				&dev->i2c_bus[1].i2c_adap,
-				"tuner", "tuner", v4l2_i2c_tuner_addrs(ADDRS_TV));
+				"tuner", "tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_TV));
 		if (sd) {
 			struct tuner_setup tun_setup;
 
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index e5f07fbd5a3..33be6369871 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -3439,20 +3439,20 @@ struct cx88_core *cx88_core_create(struct pci_dev *pci, int nr)
 		   The radio_type is sometimes missing, or set to UNSET but
 		   later code configures a tea5767.
 		 */
-		v4l2_i2c_new_probed_subdev(&core->v4l2_dev, &core->i2c_adap,
+		v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap,
 				"tuner", "tuner",
-				v4l2_i2c_tuner_addrs(ADDRS_RADIO));
+				0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
 		if (has_demod)
-			v4l2_i2c_new_probed_subdev(&core->v4l2_dev,
+			v4l2_i2c_new_subdev(&core->v4l2_dev,
 				&core->i2c_adap, "tuner", "tuner",
-				v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
+				0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
 		if (core->board.tuner_addr == ADDR_UNSET) {
-			v4l2_i2c_new_probed_subdev(&core->v4l2_dev,
+			v4l2_i2c_new_subdev(&core->v4l2_dev,
 				&core->i2c_adap, "tuner", "tuner",
-				has_demod ? tv_addrs + 4 : tv_addrs);
+				0, has_demod ? tv_addrs + 4 : tv_addrs);
 		} else {
 			v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap,
-				"tuner", "tuner", core->board.tuner_addr);
+				"tuner", "tuner", core->board.tuner_addr, NULL);
 		}
 	}
 
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index 2bb54c3ef5c..81d2b5dea18 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -1881,14 +1881,14 @@ static int __devinit cx8800_initdev(struct pci_dev *pci_dev,
 
 	if (core->board.audio_chip == V4L2_IDENT_WM8775)
 		v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap,
-				"wm8775", "wm8775", 0x36 >> 1);
+				"wm8775", "wm8775", 0x36 >> 1, NULL);
 
 	if (core->board.audio_chip == V4L2_IDENT_TVAUDIO) {
 		/* This probes for a tda9874 as is used on some
 		   Pixelview Ultra boards. */
-		v4l2_i2c_new_probed_subdev_addr(&core->v4l2_dev,
+		v4l2_i2c_new_subdev(&core->v4l2_dev,
 				&core->i2c_adap,
-				"tvaudio", "tvaudio", 0xb0 >> 1);
+				"tvaudio", "tvaudio", 0, I2C_ADDRS(0xb0 >> 1));
 	}
 
 	switch (core->boardnr) {
diff --git a/drivers/media/video/davinci/vpif_display.c b/drivers/media/video/davinci/vpif_display.c
index 8ea65d794db..a125a452d24 100644
--- a/drivers/media/video/davinci/vpif_display.c
+++ b/drivers/media/video/davinci/vpif_display.c
@@ -1566,10 +1566,10 @@ static __init int vpif_probe(struct platform_device *pdev)
 	}
 
 	for (i = 0; i < subdev_count; i++) {
-		vpif_obj.sd[i] = v4l2_i2c_new_probed_subdev(&vpif_obj.v4l2_dev,
+		vpif_obj.sd[i] = v4l2_i2c_new_subdev(&vpif_obj.v4l2_dev,
 						i2c_adap, subdevdata[i].name,
 						subdevdata[i].name,
-						&subdevdata[i].addr);
+						0, I2C_ADDRS(subdevdata[i].addr));
 		if (!vpif_obj.sd[i]) {
 			vpif_err("Error registering v4l2 subdevice\n");
 			goto probe_subdev_out;
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 8a5ce818170..bdb249bd9d5 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -2372,55 +2372,55 @@ void em28xx_card_setup(struct em28xx *dev)
 
 	/* request some modules */
 	if (dev->board.has_msp34xx)
-		v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
-			"msp3400", "msp3400", msp3400_addrs);
+		v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+			"msp3400", "msp3400", 0, msp3400_addrs);
 
 	if (dev->board.decoder == EM28XX_SAA711X)
-		v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
-			"saa7115", "saa7115_auto", saa711x_addrs);
+		v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+			"saa7115", "saa7115_auto", 0, saa711x_addrs);
 
 	if (dev->board.decoder == EM28XX_TVP5150)
-		v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
-			"tvp5150", "tvp5150", tvp5150_addrs);
+		v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+			"tvp5150", "tvp5150", 0, tvp5150_addrs);
 
 	if (dev->em28xx_sensor == EM28XX_MT9V011) {
 		struct v4l2_subdev *sd;
 
-		sd = v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
-			 &dev->i2c_adap, "mt9v011", "mt9v011", mt9v011_addrs);
+		sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
+			 &dev->i2c_adap, "mt9v011", "mt9v011", 0, mt9v011_addrs);
 		v4l2_subdev_call(sd, core, s_config, 0, &dev->sensor_xtal);
 	}
 
 
 	if (dev->board.adecoder == EM28XX_TVAUDIO)
 		v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
-			"tvaudio", "tvaudio", dev->board.tvaudio_addr);
+			"tvaudio", "tvaudio", dev->board.tvaudio_addr, NULL);
 
 	if (dev->board.tuner_type != TUNER_ABSENT) {
 		int has_demod = (dev->tda9887_conf & TDA9887_PRESENT);
 
 		if (dev->board.radio.type)
 			v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
-				"tuner", "tuner", dev->board.radio_addr);
+				"tuner", "tuner", dev->board.radio_addr, NULL);
 
 		if (has_demod)
-			v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
+			v4l2_i2c_new_subdev(&dev->v4l2_dev,
 				&dev->i2c_adap, "tuner", "tuner",
-				v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
+				0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
 		if (dev->tuner_addr == 0) {
 			enum v4l2_i2c_tuner_type type =
 				has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
 			struct v4l2_subdev *sd;
 
-			sd = v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
+			sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
 				&dev->i2c_adap, "tuner", "tuner",
-				v4l2_i2c_tuner_addrs(type));
+				0, v4l2_i2c_tuner_addrs(type));
 
 			if (sd)
 				dev->tuner_addr = v4l2_i2c_subdev_addr(sd);
 		} else {
 			v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
-				"tuner", "tuner", dev->tuner_addr);
+				"tuner", "tuner", dev->tuner_addr, NULL);
 		}
 	}
 
diff --git a/drivers/media/video/ivtv/ivtv-i2c.c b/drivers/media/video/ivtv/ivtv-i2c.c
index 8f15a31d3f6..b9c71e61f7d 100644
--- a/drivers/media/video/ivtv/ivtv-i2c.c
+++ b/drivers/media/video/ivtv/ivtv-i2c.c
@@ -161,19 +161,19 @@ int ivtv_i2c_register(struct ivtv *itv, unsigned idx)
 		return -1;
 	if (hw == IVTV_HW_TUNER) {
 		/* special tuner handling */
-		sd = v4l2_i2c_new_probed_subdev(&itv->v4l2_dev,
+		sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
 				adap, mod, type,
-				itv->card_i2c->radio);
+				0, itv->card_i2c->radio);
 		if (sd)
 			sd->grp_id = 1 << idx;
-		sd = v4l2_i2c_new_probed_subdev(&itv->v4l2_dev,
+		sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
 				adap, mod, type,
-				itv->card_i2c->demod);
+				0, itv->card_i2c->demod);
 		if (sd)
 			sd->grp_id = 1 << idx;
-		sd = v4l2_i2c_new_probed_subdev(&itv->v4l2_dev,
+		sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
 				adap, mod, type,
-				itv->card_i2c->tv);
+				0, itv->card_i2c->tv);
 		if (sd)
 			sd->grp_id = 1 << idx;
 		return sd ? 0 : -1;
@@ -181,11 +181,11 @@ int ivtv_i2c_register(struct ivtv *itv, unsigned idx)
 	if (!hw_addrs[idx])
 		return -1;
 	if (hw == IVTV_HW_UPD64031A || hw == IVTV_HW_UPD6408X) {
-		sd = v4l2_i2c_new_probed_subdev_addr(&itv->v4l2_dev,
-				adap, mod, type, hw_addrs[idx]);
+		sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
+				adap, mod, type, 0, I2C_ADDRS(hw_addrs[idx]));
 	} else {
 		sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
-				adap, mod, type, hw_addrs[idx]);
+				adap, mod, type, hw_addrs[idx], NULL);
 	}
 	if (sd)
 		sd->grp_id = 1 << idx;
diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c
index 35890e8b243..3454070e63f 100644
--- a/drivers/media/video/mxb.c
+++ b/drivers/media/video/mxb.c
@@ -186,19 +186,19 @@ static int mxb_probe(struct saa7146_dev *dev)
 	}
 
 	mxb->saa7111a = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
-			"saa7115", "saa7111", I2C_SAA7111A);
+			"saa7115", "saa7111", I2C_SAA7111A, NULL);
 	mxb->tea6420_1 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
-			"tea6420", "tea6420", I2C_TEA6420_1);
+			"tea6420", "tea6420", I2C_TEA6420_1, NULL);
 	mxb->tea6420_2 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
-			"tea6420", "tea6420", I2C_TEA6420_2);
+			"tea6420", "tea6420", I2C_TEA6420_2, NULL);
 	mxb->tea6415c = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
-			"tea6415c", "tea6415c", I2C_TEA6415C);
+			"tea6415c", "tea6415c", I2C_TEA6415C, NULL);
 	mxb->tda9840 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
-			"tda9840", "tda9840", I2C_TDA9840);
+			"tda9840", "tda9840", I2C_TDA9840, NULL);
 	mxb->tuner = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
-			"tuner", "tuner", I2C_TUNER);
+			"tuner", "tuner", I2C_TUNER, NULL);
 	if (v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
-			"saa5246a", "saa5246a", I2C_SAA5246A)) {
+			"saa5246a", "saa5246a", I2C_SAA5246A, NULL)) {
 		printk(KERN_INFO "mxb: found teletext decoder\n");
 	}
 
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
index cbc388729d7..13639b30270 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
@@ -2063,8 +2063,8 @@ static int pvr2_hdw_load_subdev(struct pvr2_hdw *hdw,
 		return -EINVAL;
 	}
 
-	/* Note how the 2nd and 3rd arguments are the same for both
-	 * v4l2_i2c_new_subdev() and v4l2_i2c_new_probed_subdev().  Why?
+	/* Note how the 2nd and 3rd arguments are the same for
+	 * v4l2_i2c_new_subdev().  Why?
 	 * Well the 2nd argument is the module name to load, while the 3rd
 	 * argument is documented in the framework as being the "chipid" -
 	 * and every other place where I can find examples of this, the
@@ -2077,15 +2077,15 @@ static int pvr2_hdw_load_subdev(struct pvr2_hdw *hdw,
 			   mid, i2caddr[0]);
 		sd = v4l2_i2c_new_subdev(&hdw->v4l2_dev, &hdw->i2c_adap,
 					 fname, fname,
-					 i2caddr[0]);
+					 i2caddr[0], NULL);
 	} else {
 		pvr2_trace(PVR2_TRACE_INIT,
 			   "Module ID %u:"
 			   " Setting up with address probe list",
 			   mid);
-		sd = v4l2_i2c_new_probed_subdev(&hdw->v4l2_dev, &hdw->i2c_adap,
+		sd = v4l2_i2c_new_subdev(&hdw->v4l2_dev, &hdw->i2c_adap,
 						fname, fname,
-						i2caddr);
+						0, i2caddr);
 	}
 
 	if (!sd) {
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index 1b29487fd25..14b9ba4579b 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -7208,22 +7208,22 @@ int saa7134_board_init2(struct saa7134_dev *dev)
 		if (dev->radio_type != UNSET)
 			v4l2_i2c_new_subdev(&dev->v4l2_dev,
 				&dev->i2c_adap, "tuner", "tuner",
-				dev->radio_addr);
+				dev->radio_addr, NULL);
 		if (has_demod)
-			v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
+			v4l2_i2c_new_subdev(&dev->v4l2_dev,
 				&dev->i2c_adap, "tuner", "tuner",
-				v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
+				0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
 		if (dev->tuner_addr == ADDR_UNSET) {
 			enum v4l2_i2c_tuner_type type =
 				has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
 
-			v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
+			v4l2_i2c_new_subdev(&dev->v4l2_dev,
 				&dev->i2c_adap, "tuner", "tuner",
-				v4l2_i2c_tuner_addrs(type));
+				0, v4l2_i2c_tuner_addrs(type));
 		} else {
 			v4l2_i2c_new_subdev(&dev->v4l2_dev,
 				&dev->i2c_adap, "tuner", "tuner",
-				dev->tuner_addr);
+				dev->tuner_addr, NULL);
 		}
 	}
 
diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c
index cb78c956d81..f87757fccc7 100644
--- a/drivers/media/video/saa7134/saa7134-core.c
+++ b/drivers/media/video/saa7134/saa7134-core.c
@@ -1000,7 +1000,7 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
 		struct v4l2_subdev *sd =
 			v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
 				"saa6752hs", "saa6752hs",
-				saa7134_boards[dev->board].empress_addr);
+				saa7134_boards[dev->board].empress_addr, NULL);
 
 		if (sd)
 			sd->grp_id = GRP_EMPRESS;
@@ -1009,9 +1009,9 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
 	if (saa7134_boards[dev->board].rds_addr) {
 		struct v4l2_subdev *sd;
 
-		sd = v4l2_i2c_new_probed_subdev_addr(&dev->v4l2_dev,
+		sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
 				&dev->i2c_adap,	"saa6588", "saa6588",
-				saa7134_boards[dev->board].rds_addr);
+				0, I2C_ADDRS(saa7134_boards[dev->board].rds_addr));
 		if (sd) {
 			printk(KERN_INFO "%s: found RDS decoder\n", dev->name);
 			dev->has_rds = 1;
diff --git a/drivers/media/video/usbvision/usbvision-i2c.c b/drivers/media/video/usbvision/usbvision-i2c.c
index 1fe5befbbf8..f97fd06d594 100644
--- a/drivers/media/video/usbvision/usbvision-i2c.c
+++ b/drivers/media/video/usbvision/usbvision-i2c.c
@@ -246,9 +246,9 @@ int usbvision_i2c_register(struct usb_usbvision *usbvision)
 	switch (usbvision_device_data[usbvision->DevModel].Codec) {
 	case CODEC_SAA7113:
 	case CODEC_SAA7111:
-		v4l2_i2c_new_probed_subdev(&usbvision->v4l2_dev,
+		v4l2_i2c_new_subdev(&usbvision->v4l2_dev,
 				&usbvision->i2c_adap, "saa7115",
-				"saa7115_auto", saa711x_addrs);
+				"saa7115_auto", 0, saa711x_addrs);
 		break;
 	}
 	if (usbvision_device_data[usbvision->DevModel].Tuner == 1) {
@@ -256,16 +256,16 @@ int usbvision_i2c_register(struct usb_usbvision *usbvision)
 		enum v4l2_i2c_tuner_type type;
 		struct tuner_setup tun_setup;
 
-		sd = v4l2_i2c_new_probed_subdev(&usbvision->v4l2_dev,
+		sd = v4l2_i2c_new_subdev(&usbvision->v4l2_dev,
 				&usbvision->i2c_adap, "tuner",
-				"tuner", v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
+				"tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
 		/* depending on whether we found a demod or not, select
 		   the tuner type. */
 		type = sd ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
 
-		sd = v4l2_i2c_new_probed_subdev(&usbvision->v4l2_dev,
+		sd = v4l2_i2c_new_subdev(&usbvision->v4l2_dev,
 				&usbvision->i2c_adap, "tuner",
-				"tuner", v4l2_i2c_tuner_addrs(type));
+				"tuner", 0, v4l2_i2c_tuner_addrs(type));
 
 		if (usbvision->tuner_type != -1) {
 			tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c
index 3a0c64935b0..f5a93ae3cdf 100644
--- a/drivers/media/video/v4l2-common.c
+++ b/drivers/media/video/v4l2-common.c
@@ -813,139 +813,6 @@ EXPORT_SYMBOL_GPL(v4l2_i2c_subdev_init);
 
 
 
-/* Load an i2c sub-device. */
-struct v4l2_subdev *v4l2_i2c_new_subdev(struct v4l2_device *v4l2_dev,
-		struct i2c_adapter *adapter,
-		const char *module_name, const char *client_type, u8 addr)
-{
-	struct v4l2_subdev *sd = NULL;
-	struct i2c_client *client;
-	struct i2c_board_info info;
-
-	BUG_ON(!v4l2_dev);
-
-	if (module_name)
-		request_module(module_name);
-
-	/* Setup the i2c board info with the device type and
-	   the device address. */
-	memset(&info, 0, sizeof(info));
-	strlcpy(info.type, client_type, sizeof(info.type));
-	info.addr = addr;
-
-	/* Create the i2c client */
-	client = i2c_new_device(adapter, &info);
-	/* Note: it is possible in the future that
-	   c->driver is NULL if the driver is still being loaded.
-	   We need better support from the kernel so that we
-	   can easily wait for the load to finish. */
-	if (client == NULL || client->driver == NULL)
-		goto error;
-
-	/* Lock the module so we can safely get the v4l2_subdev pointer */
-	if (!try_module_get(client->driver->driver.owner))
-		goto error;
-	sd = i2c_get_clientdata(client);
-
-	/* Register with the v4l2_device which increases the module's
-	   use count as well. */
-	if (v4l2_device_register_subdev(v4l2_dev, sd))
-		sd = NULL;
-	/* Decrease the module use count to match the first try_module_get. */
-	module_put(client->driver->driver.owner);
-
-	if (sd) {
-		/* We return errors from v4l2_subdev_call only if we have the
-		   callback as the .s_config is not mandatory */
-		int err = v4l2_subdev_call(sd, core, s_config, 0, NULL);
-
-		if (err && err != -ENOIOCTLCMD) {
-			v4l2_device_unregister_subdev(sd);
-			sd = NULL;
-		}
-	}
-
-error:
-	/* If we have a client but no subdev, then something went wrong and
-	   we must unregister the client. */
-	if (client && sd == NULL)
-		i2c_unregister_device(client);
-	return sd;
-}
-EXPORT_SYMBOL_GPL(v4l2_i2c_new_subdev);
-
-/* Probe and load an i2c sub-device. */
-struct v4l2_subdev *v4l2_i2c_new_probed_subdev(struct v4l2_device *v4l2_dev,
-	struct i2c_adapter *adapter,
-	const char *module_name, const char *client_type,
-	const unsigned short *addrs)
-{
-	struct v4l2_subdev *sd = NULL;
-	struct i2c_client *client = NULL;
-	struct i2c_board_info info;
-
-	BUG_ON(!v4l2_dev);
-
-	if (module_name)
-		request_module(module_name);
-
-	/* Setup the i2c board info with the device type and
-	   the device address. */
-	memset(&info, 0, sizeof(info));
-	strlcpy(info.type, client_type, sizeof(info.type));
-
-	/* Probe and create the i2c client */
-	client = i2c_new_probed_device(adapter, &info, addrs);
-	/* Note: it is possible in the future that
-	   c->driver is NULL if the driver is still being loaded.
-	   We need better support from the kernel so that we
-	   can easily wait for the load to finish. */
-	if (client == NULL || client->driver == NULL)
-		goto error;
-
-	/* Lock the module so we can safely get the v4l2_subdev pointer */
-	if (!try_module_get(client->driver->driver.owner))
-		goto error;
-	sd = i2c_get_clientdata(client);
-
-	/* Register with the v4l2_device which increases the module's
-	   use count as well. */
-	if (v4l2_device_register_subdev(v4l2_dev, sd))
-		sd = NULL;
-	/* Decrease the module use count to match the first try_module_get. */
-	module_put(client->driver->driver.owner);
-
-	if (sd) {
-		/* We return errors from v4l2_subdev_call only if we have the
-		   callback as the .s_config is not mandatory */
-		int err = v4l2_subdev_call(sd, core, s_config, 0, NULL);
-
-		if (err && err != -ENOIOCTLCMD) {
-			v4l2_device_unregister_subdev(sd);
-			sd = NULL;
-		}
-	}
-
-error:
-	/* If we have a client but no subdev, then something went wrong and
-	   we must unregister the client. */
-	if (client && sd == NULL)
-		i2c_unregister_device(client);
-	return sd;
-}
-EXPORT_SYMBOL_GPL(v4l2_i2c_new_probed_subdev);
-
-struct v4l2_subdev *v4l2_i2c_new_probed_subdev_addr(struct v4l2_device *v4l2_dev,
-		struct i2c_adapter *adapter,
-		const char *module_name, const char *client_type, u8 addr)
-{
-	unsigned short addrs[2] = { addr, I2C_CLIENT_END };
-
-	return v4l2_i2c_new_probed_subdev(v4l2_dev, adapter,
-			module_name, client_type, addrs);
-}
-EXPORT_SYMBOL_GPL(v4l2_i2c_new_probed_subdev_addr);
-
 /* Load an i2c sub-device. */
 struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev,
 		struct i2c_adapter *adapter, const char *module_name,
diff --git a/drivers/media/video/vino.c b/drivers/media/video/vino.c
index f3b6e15d91f..cd6a3446ab7 100644
--- a/drivers/media/video/vino.c
+++ b/drivers/media/video/vino.c
@@ -4333,11 +4333,11 @@ static int __init vino_module_init(void)
 	vino_init_stage++;
 
 	vino_drvdata->decoder =
-		v4l2_i2c_new_probed_subdev_addr(&vino_drvdata->v4l2_dev,
-			&vino_i2c_adapter, "saa7191", "saa7191", 0x45);
+		v4l2_i2c_new_subdev(&vino_drvdata->v4l2_dev, &vino_i2c_adapter,
+			       "saa7191", "saa7191", 0, I2C_ADDRS(0x45));
 	vino_drvdata->camera =
-		v4l2_i2c_new_probed_subdev_addr(&vino_drvdata->v4l2_dev,
-			&vino_i2c_adapter, "indycam", "indycam", 0x2b);
+		v4l2_i2c_new_subdev(&vino_drvdata->v4l2_dev, &vino_i2c_adapter,
+			       "indycam", "indycam", 0, I2C_ADDRS(0x2b));
 
 	dprintk("init complete!\n");
 
diff --git a/drivers/media/video/w9968cf.c b/drivers/media/video/w9968cf.c
index 602484dd3da..37fcdc447db 100644
--- a/drivers/media/video/w9968cf.c
+++ b/drivers/media/video/w9968cf.c
@@ -3515,9 +3515,9 @@ w9968cf_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
 	w9968cf_turn_on_led(cam);
 
 	w9968cf_i2c_init(cam);
-	cam->sensor_sd = v4l2_i2c_new_probed_subdev(&cam->v4l2_dev,
+	cam->sensor_sd = v4l2_i2c_new_subdev(&cam->v4l2_dev,
 			&cam->i2c_adapter,
-			"ovcamchip", "ovcamchip", addrs);
+			"ovcamchip", "ovcamchip", 0, addrs);
 
 	usb_set_intfdata(intf, cam);
 	mutex_unlock(&cam->dev_mutex);
diff --git a/drivers/media/video/zoran/zoran_card.c b/drivers/media/video/zoran/zoran_card.c
index 0c4d9b1f8e6..be70574870d 100644
--- a/drivers/media/video/zoran/zoran_card.c
+++ b/drivers/media/video/zoran/zoran_card.c
@@ -1357,15 +1357,15 @@ static int __devinit zoran_probe(struct pci_dev *pdev,
 		goto zr_free_irq;
 	}
 
-	zr->decoder = v4l2_i2c_new_probed_subdev(&zr->v4l2_dev,
+	zr->decoder = v4l2_i2c_new_subdev(&zr->v4l2_dev,
 		&zr->i2c_adapter, zr->card.mod_decoder, zr->card.i2c_decoder,
-		zr->card.addrs_decoder);
+		0, zr->card.addrs_decoder);
 
 	if (zr->card.mod_encoder)
-		zr->encoder = v4l2_i2c_new_probed_subdev(&zr->v4l2_dev,
+		zr->encoder = v4l2_i2c_new_subdev(&zr->v4l2_dev,
 			&zr->i2c_adapter,
 			zr->card.mod_encoder, zr->card.i2c_encoder,
-			zr->card.addrs_encoder);
+			0, zr->card.addrs_encoder);
 
 	dprintk(2,
 		KERN_INFO "%s: Initializing videocodec bus...\n",
-- 
cgit v1.2.3


From 7ae0cd9bc793e16d8d68df3c17c601732cc1d3c7 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Fri, 19 Jun 2009 11:32:56 -0300
Subject: V4L/DVB (12541): v4l: remove video_register_device_index

video_register_device_index is never actually called, instead the
stream index number is always calculated automatically.

This patch removes this function and simplifies the internal get_index
function since that can now always just return the first free index.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/v4l2-dev.c | 55 ++++++++++++------------------------------
 1 file changed, 15 insertions(+), 40 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c
index a7f1b69a7da..1219721894a 100644
--- a/drivers/media/video/v4l2-dev.c
+++ b/drivers/media/video/v4l2-dev.c
@@ -299,32 +299,28 @@ static const struct file_operations v4l2_fops = {
 };
 
 /**
- * get_index - assign stream number based on parent device
+ * get_index - assign stream index number based on parent device
  * @vdev: video_device to assign index number to, vdev->parent should be assigned
- * @num:  -1 if auto assign, requested number otherwise
  *
  * Note that when this is called the new device has not yet been registered
- * in the video_device array.
+ * in the video_device array, but it was able to obtain a minor number.
  *
- * Returns -ENFILE if num is already in use, a free index number if
- * successful.
+ * This means that we can always obtain a free stream index number since
+ * the worst case scenario is that there are VIDEO_NUM_DEVICES - 1 slots in
+ * use of the video_device array.
+ *
+ * Returns a free index number.
  */
-static int get_index(struct video_device *vdev, int num)
+static int get_index(struct video_device *vdev)
 {
 	/* This can be static since this function is called with the global
 	   videodev_lock held. */
 	static DECLARE_BITMAP(used, VIDEO_NUM_DEVICES);
 	int i;
 
-	if (num >= VIDEO_NUM_DEVICES) {
-		printk(KERN_ERR "videodev: %s num is too large\n", __func__);
-		return -EINVAL;
-	}
-
-	/* Some drivers do not set the parent. In that case always return
-	   num or 0. */
+	/* Some drivers do not set the parent. In that case always return 0. */
 	if (vdev->parent == NULL)
-		return num >= 0 ? num : 0;
+		return 0;
 
 	bitmap_zero(used, VIDEO_NUM_DEVICES);
 
@@ -335,30 +331,15 @@ static int get_index(struct video_device *vdev, int num)
 		}
 	}
 
-	if (num >= 0) {
-		if (test_bit(num, used))
-			return -ENFILE;
-		return num;
-	}
-
-	i = find_first_zero_bit(used, VIDEO_NUM_DEVICES);
-	return i == VIDEO_NUM_DEVICES ? -ENFILE : i;
+	return find_first_zero_bit(used, VIDEO_NUM_DEVICES);
 }
 
-int video_register_device(struct video_device *vdev, int type, int nr)
-{
-	return video_register_device_index(vdev, type, nr, -1);
-}
-EXPORT_SYMBOL(video_register_device);
-
 /**
- *	video_register_device_index - register video4linux devices
+ *	video_register_device - register video4linux devices
  *	@vdev: video device structure we want to register
  *	@type: type of device to register
  *	@nr:   which device number (0 == /dev/video0, 1 == /dev/video1, ...
  *             -1 == first free)
- *	@index: stream number based on parent device;
- *		-1 if auto assign, requested number otherwise
  *
  *	The registration code assigns minor numbers based on the type
  *	requested. -ENFILE is returned in all the device slots for this
@@ -377,8 +358,7 @@ EXPORT_SYMBOL(video_register_device);
  *
  *	%VFL_TYPE_RADIO - A radio card
  */
-int video_register_device_index(struct video_device *vdev, int type, int nr,
-					int index)
+int video_register_device(struct video_device *vdev, int type, int nr)
 {
 	int i = 0;
 	int ret;
@@ -481,14 +461,9 @@ int video_register_device_index(struct video_device *vdev, int type, int nr,
 	set_bit(nr, video_nums[type]);
 	/* Should not happen since we thought this minor was free */
 	WARN_ON(video_device[vdev->minor] != NULL);
-	ret = vdev->index = get_index(vdev, index);
+	vdev->index = get_index(vdev);
 	mutex_unlock(&videodev_lock);
 
-	if (ret < 0) {
-		printk(KERN_ERR "%s: get_index failed\n", __func__);
-		goto cleanup;
-	}
-
 	/* Part 3: Initialize the character device */
 	vdev->cdev = cdev_alloc();
 	if (vdev->cdev == NULL) {
@@ -543,7 +518,7 @@ cleanup:
 	vdev->minor = -1;
 	return ret;
 }
-EXPORT_SYMBOL(video_register_device_index);
+EXPORT_SYMBOL(video_register_device);
 
 /**
  *	video_unregister_device - unregister a video4linux device
-- 
cgit v1.2.3


From 22e221258b56cc1a4dc5a9fb2c26f4d6ed9dde81 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Sun, 6 Sep 2009 07:13:14 -0300
Subject: V4L/DVB (12722): v4l2-dev: replace 'kernel number' by 'device node
 number'.

The term 'kernel number' is very vague, so replace it with the somewhat more
descriptive term 'device node number'.

In one place the local variable 'nr' was used to create the device node number
of the new device name. This has been replaced with the vdev->num field to
more clearly mark this as being the device node number and not the minor
number.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/v4l2-dev.c | 38 ++++++++++++++++++++------------------
 1 file changed, 20 insertions(+), 18 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c
index 1219721894a..4e61c77b763 100644
--- a/drivers/media/video/v4l2-dev.c
+++ b/drivers/media/video/v4l2-dev.c
@@ -66,7 +66,7 @@ static struct device_attribute video_device_attrs[] = {
  */
 static struct video_device *video_device[VIDEO_NUM_DEVICES];
 static DEFINE_MUTEX(videodev_lock);
-static DECLARE_BITMAP(video_nums[VFL_TYPE_MAX], VIDEO_NUM_DEVICES);
+static DECLARE_BITMAP(devnode_nums[VFL_TYPE_MAX], VIDEO_NUM_DEVICES);
 
 struct video_device *video_device_alloc(void)
 {
@@ -119,8 +119,8 @@ static void v4l2_device_release(struct device *cd)
 	   the release() callback. */
 	vdev->cdev = NULL;
 
-	/* Mark minor as free */
-	clear_bit(vdev->num, video_nums[vdev->vfl_type]);
+	/* Mark device node number as free */
+	clear_bit(vdev->num, devnode_nums[vdev->vfl_type]);
 
 	mutex_unlock(&videodev_lock);
 
@@ -338,13 +338,14 @@ static int get_index(struct video_device *vdev)
  *	video_register_device - register video4linux devices
  *	@vdev: video device structure we want to register
  *	@type: type of device to register
- *	@nr:   which device number (0 == /dev/video0, 1 == /dev/video1, ...
+ *	@nr:   which device node number (0 == /dev/video0, 1 == /dev/video1, ...
  *             -1 == first free)
  *
- *	The registration code assigns minor numbers based on the type
- *	requested. -ENFILE is returned in all the device slots for this
- *	category are full. If not then the minor field is set and the
- *	driver initialize function is called (if non %NULL).
+ *	The registration code assigns minor numbers and device node numbers
+ *	based on the requested type and registers the new device node with
+ *	the kernel.
+ *	An error is returned if no free minor or device node number could be
+ *	found, or if the registration of the device node failed.
  *
  *	Zero is returned on success.
  *
@@ -401,7 +402,7 @@ int video_register_device(struct video_device *vdev, int type, int nr)
 	if (vdev->v4l2_dev && vdev->v4l2_dev->dev)
 		vdev->parent = vdev->v4l2_dev->dev;
 
-	/* Part 2: find a free minor, kernel number and device index. */
+	/* Part 2: find a free minor, device node number and device index. */
 #ifdef CONFIG_VIDEO_FIXED_MINOR_RANGES
 	/* Keep the ranges for the first four types for historical
 	 * reasons.
@@ -432,21 +433,22 @@ int video_register_device(struct video_device *vdev, int type, int nr)
 	}
 #endif
 
-	/* Pick a minor number */
+	/* Pick a device node number */
 	mutex_lock(&videodev_lock);
-	nr = find_next_zero_bit(video_nums[type], minor_cnt, nr == -1 ? 0 : nr);
+	nr = find_next_zero_bit(devnode_nums[type], minor_cnt, nr == -1 ? 0 : nr);
 	if (nr == minor_cnt)
-		nr = find_first_zero_bit(video_nums[type], minor_cnt);
+		nr = find_first_zero_bit(devnode_nums[type], minor_cnt);
 	if (nr == minor_cnt) {
-		printk(KERN_ERR "could not get a free kernel number\n");
+		printk(KERN_ERR "could not get a free device node number\n");
 		mutex_unlock(&videodev_lock);
 		return -ENFILE;
 	}
 #ifdef CONFIG_VIDEO_FIXED_MINOR_RANGES
-	/* 1-on-1 mapping of kernel number to minor number */
+	/* 1-on-1 mapping of device node number to minor number */
 	i = nr;
 #else
-	/* The kernel number and minor numbers are independent */
+	/* The device node number and minor numbers are independent, so
+	   we just find the first free minor number. */
 	for (i = 0; i < VIDEO_NUM_DEVICES; i++)
 		if (video_device[i] == NULL)
 			break;
@@ -458,7 +460,7 @@ int video_register_device(struct video_device *vdev, int type, int nr)
 #endif
 	vdev->minor = i + minor_offset;
 	vdev->num = nr;
-	set_bit(nr, video_nums[type]);
+	set_bit(nr, devnode_nums[type]);
 	/* Should not happen since we thought this minor was free */
 	WARN_ON(video_device[vdev->minor] != NULL);
 	vdev->index = get_index(vdev);
@@ -492,7 +494,7 @@ int video_register_device(struct video_device *vdev, int type, int nr)
 	vdev->dev.devt = MKDEV(VIDEO_MAJOR, vdev->minor);
 	if (vdev->parent)
 		vdev->dev.parent = vdev->parent;
-	dev_set_name(&vdev->dev, "%s%d", name_base, nr);
+	dev_set_name(&vdev->dev, "%s%d", name_base, vdev->num);
 	ret = device_register(&vdev->dev);
 	if (ret < 0) {
 		printk(KERN_ERR "%s: device_register failed\n", __func__);
@@ -512,7 +514,7 @@ cleanup:
 	mutex_lock(&videodev_lock);
 	if (vdev->cdev)
 		cdev_del(vdev->cdev);
-	clear_bit(vdev->num, video_nums[type]);
+	clear_bit(vdev->num, devnode_nums[type]);
 	mutex_unlock(&videodev_lock);
 	/* Mark this video device as never having been registered. */
 	vdev->minor = -1;
-- 
cgit v1.2.3


From 581644d9c95dd04aa46267aa0b6b5619d02b02ea Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Fri, 19 Jun 2009 11:54:00 -0300
Subject: V4L/DVB (12723): ivtv/cx18: replace 'kernel number' with 'device node
 number'.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx18/cx18-driver.c  | 2 +-
 drivers/media/video/cx18/cx18-streams.c | 2 +-
 drivers/media/video/ivtv/ivtv-driver.c  | 2 +-
 drivers/media/video/ivtv/ivtv-streams.c | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c
index dd0224f328a..6dd51e27582 100644
--- a/drivers/media/video/cx18/cx18-driver.c
+++ b/drivers/media/video/cx18/cx18-driver.c
@@ -231,7 +231,7 @@ MODULE_PARM_DESC(enc_pcm_bufs,
 		 "Number of encoder PCM buffers\n"
 		 "\t\t\tDefault is computed from other enc_pcm_* parameters");
 
-MODULE_PARM_DESC(cx18_first_minor, "Set kernel number assigned to first card");
+MODULE_PARM_DESC(cx18_first_minor, "Set device node number assigned to first card");
 
 MODULE_AUTHOR("Hans Verkuil");
 MODULE_DESCRIPTION("CX23418 driver");
diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c
index 54d248e16d8..6c988b95adc 100644
--- a/drivers/media/video/cx18/cx18-streams.c
+++ b/drivers/media/video/cx18/cx18-streams.c
@@ -247,7 +247,7 @@ static int cx18_reg_dev(struct cx18 *cx, int type)
 	/* Register device. First try the desired minor, then any free one. */
 	ret = video_register_device(s->video_dev, vfl_type, num);
 	if (ret < 0) {
-		CX18_ERR("Couldn't register v4l2 device for %s kernel number %d\n",
+		CX18_ERR("Couldn't register v4l2 device for %s (device node number %d)\n",
 			s->name, num);
 		video_device_release(s->video_dev);
 		s->video_dev = NULL;
diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c
index 63ea0fb6606..463ec3457d7 100644
--- a/drivers/media/video/ivtv/ivtv-driver.c
+++ b/drivers/media/video/ivtv/ivtv-driver.c
@@ -246,7 +246,7 @@ MODULE_PARM_DESC(newi2c,
 		 "\t\t\t-1 is autodetect, 0 is off, 1 is on\n"
 		 "\t\t\tDefault is autodetect");
 
-MODULE_PARM_DESC(ivtv_first_minor, "Set kernel number assigned to first card");
+MODULE_PARM_DESC(ivtv_first_minor, "Set device node number assigned to first card");
 
 MODULE_AUTHOR("Kevin Thayer, Chris Kennedy, Hans Verkuil");
 MODULE_DESCRIPTION("CX23415/CX23416 driver");
diff --git a/drivers/media/video/ivtv/ivtv-streams.c b/drivers/media/video/ivtv/ivtv-streams.c
index 15da01710ef..23400035240 100644
--- a/drivers/media/video/ivtv/ivtv-streams.c
+++ b/drivers/media/video/ivtv/ivtv-streams.c
@@ -262,7 +262,7 @@ static int ivtv_reg_dev(struct ivtv *itv, int type)
 
 	/* Register device. First try the desired minor, then any free one. */
 	if (video_register_device(s->vdev, vfl_type, num)) {
-		IVTV_ERR("Couldn't register v4l2 device for %s kernel number %d\n",
+		IVTV_ERR("Couldn't register v4l2 device for %s (device node number %d)\n",
 				s->name, num);
 		video_device_release(s->vdev);
 		s->vdev = NULL;
-- 
cgit v1.2.3


From 5062cb70c828bd7b2a8223390ae836c5baa250b9 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Mon, 7 Sep 2009 03:40:24 -0300
Subject: V4L/DVB (12724): v4l2-dev: add simple wrapper functions around the
 devnode numbers

There are some subtle differences in the way the devnode numbers are
handled depending on whether the FIXED_MINOR_RANGES config option is
set. Add some simple wrapper functions to handle that correctly.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/v4l2-dev.c | 53 ++++++++++++++++++++++++++++++++++++++----
 1 file changed, 48 insertions(+), 5 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c
index 4e61c77b763..4715f08157b 100644
--- a/drivers/media/video/v4l2-dev.c
+++ b/drivers/media/video/v4l2-dev.c
@@ -68,6 +68,48 @@ static struct video_device *video_device[VIDEO_NUM_DEVICES];
 static DEFINE_MUTEX(videodev_lock);
 static DECLARE_BITMAP(devnode_nums[VFL_TYPE_MAX], VIDEO_NUM_DEVICES);
 
+/* Device node utility functions */
+
+/* Note: these utility functions all assume that vfl_type is in the range
+   [0, VFL_TYPE_MAX-1]. */
+
+#ifdef CONFIG_VIDEO_FIXED_MINOR_RANGES
+/* Return the bitmap corresponding to vfl_type. */
+static inline unsigned long *devnode_bits(int vfl_type)
+{
+	/* Any types not assigned to fixed minor ranges must be mapped to
+	   one single bitmap for the purposes of finding a free node number
+	   since all those unassigned types use the same minor range. */
+	int idx = (vfl_type > VFL_TYPE_VTX) ? VFL_TYPE_MAX - 1 : vfl_type;
+
+	return devnode_nums[idx];
+}
+#else
+/* Return the bitmap corresponding to vfl_type. */
+static inline unsigned long *devnode_bits(int vfl_type)
+{
+	return devnode_nums[vfl_type];
+}
+#endif
+
+/* Mark device node number vdev->num as used */
+static inline void devnode_set(struct video_device *vdev)
+{
+	set_bit(vdev->num, devnode_bits(vdev->vfl_type));
+}
+
+/* Mark device node number vdev->num as unused */
+static inline void devnode_clear(struct video_device *vdev)
+{
+	clear_bit(vdev->num, devnode_bits(vdev->vfl_type));
+}
+
+/* Try to find a free device node number in the range [from, to> */
+static inline int devnode_find(struct video_device *vdev, int from, int to)
+{
+	return find_next_zero_bit(devnode_bits(vdev->vfl_type), to, from);
+}
+
 struct video_device *video_device_alloc(void)
 {
 	return kzalloc(sizeof(struct video_device), GFP_KERNEL);
@@ -120,7 +162,7 @@ static void v4l2_device_release(struct device *cd)
 	vdev->cdev = NULL;
 
 	/* Mark device node number as free */
-	clear_bit(vdev->num, devnode_nums[vdev->vfl_type]);
+	devnode_clear(vdev);
 
 	mutex_unlock(&videodev_lock);
 
@@ -435,9 +477,9 @@ int video_register_device(struct video_device *vdev, int type, int nr)
 
 	/* Pick a device node number */
 	mutex_lock(&videodev_lock);
-	nr = find_next_zero_bit(devnode_nums[type], minor_cnt, nr == -1 ? 0 : nr);
+	nr = devnode_find(vdev, nr == -1 ? 0 : nr, minor_cnt);
 	if (nr == minor_cnt)
-		nr = find_first_zero_bit(devnode_nums[type], minor_cnt);
+		nr = devnode_find(vdev, 0, minor_cnt);
 	if (nr == minor_cnt) {
 		printk(KERN_ERR "could not get a free device node number\n");
 		mutex_unlock(&videodev_lock);
@@ -460,7 +502,8 @@ int video_register_device(struct video_device *vdev, int type, int nr)
 #endif
 	vdev->minor = i + minor_offset;
 	vdev->num = nr;
-	set_bit(nr, devnode_nums[type]);
+	devnode_set(vdev);
+
 	/* Should not happen since we thought this minor was free */
 	WARN_ON(video_device[vdev->minor] != NULL);
 	vdev->index = get_index(vdev);
@@ -514,7 +557,7 @@ cleanup:
 	mutex_lock(&videodev_lock);
 	if (vdev->cdev)
 		cdev_del(vdev->cdev);
-	clear_bit(vdev->num, devnode_nums[type]);
+	devnode_clear(vdev);
 	mutex_unlock(&videodev_lock);
 	/* Mark this video device as never having been registered. */
 	vdev->minor = -1;
-- 
cgit v1.2.3


From 6b5270d21202fcf6ae16a6266fed83a30ccece7a Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Sun, 6 Sep 2009 07:54:00 -0300
Subject: V4L/DVB (12725): v4l: warn when desired devnodenr is in use & add
 _no_warn function

Warn when the desired device node number is already in use, except when
the new video_register_device_no_warn function is called since in some
use-cases that warning is not relevant.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx18/cx18-streams.c |  2 +-
 drivers/media/video/ivtv/ivtv-streams.c |  2 +-
 drivers/media/video/v4l2-dev.c          | 20 +++++++++++++++++++-
 3 files changed, 21 insertions(+), 3 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c
index 6c988b95adc..7df513a2dba 100644
--- a/drivers/media/video/cx18/cx18-streams.c
+++ b/drivers/media/video/cx18/cx18-streams.c
@@ -245,7 +245,7 @@ static int cx18_reg_dev(struct cx18 *cx, int type)
 	video_set_drvdata(s->video_dev, s);
 
 	/* Register device. First try the desired minor, then any free one. */
-	ret = video_register_device(s->video_dev, vfl_type, num);
+	ret = video_register_device_no_warn(s->video_dev, vfl_type, num);
 	if (ret < 0) {
 		CX18_ERR("Couldn't register v4l2 device for %s (device node number %d)\n",
 			s->name, num);
diff --git a/drivers/media/video/ivtv/ivtv-streams.c b/drivers/media/video/ivtv/ivtv-streams.c
index 23400035240..67699e3f2aa 100644
--- a/drivers/media/video/ivtv/ivtv-streams.c
+++ b/drivers/media/video/ivtv/ivtv-streams.c
@@ -261,7 +261,7 @@ static int ivtv_reg_dev(struct ivtv *itv, int type)
 	video_set_drvdata(s->vdev, s);
 
 	/* Register device. First try the desired minor, then any free one. */
-	if (video_register_device(s->vdev, vfl_type, num)) {
+	if (video_register_device_no_warn(s->vdev, vfl_type, num)) {
 		IVTV_ERR("Couldn't register v4l2 device for %s (device node number %d)\n",
 				s->name, num);
 		video_device_release(s->vdev);
diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c
index 4715f08157b..500cbe9891a 100644
--- a/drivers/media/video/v4l2-dev.c
+++ b/drivers/media/video/v4l2-dev.c
@@ -382,6 +382,8 @@ static int get_index(struct video_device *vdev)
  *	@type: type of device to register
  *	@nr:   which device node number (0 == /dev/video0, 1 == /dev/video1, ...
  *             -1 == first free)
+ *	@warn_if_nr_in_use: warn if the desired device node number
+ *	       was already in use and another number was chosen instead.
  *
  *	The registration code assigns minor numbers and device node numbers
  *	based on the requested type and registers the new device node with
@@ -401,7 +403,8 @@ static int get_index(struct video_device *vdev)
  *
  *	%VFL_TYPE_RADIO - A radio card
  */
-int video_register_device(struct video_device *vdev, int type, int nr)
+static int __video_register_device(struct video_device *vdev, int type, int nr,
+		int warn_if_nr_in_use)
 {
 	int i = 0;
 	int ret;
@@ -547,6 +550,10 @@ int video_register_device(struct video_device *vdev, int type, int nr)
 	   reference to the device goes away. */
 	vdev->dev.release = v4l2_device_release;
 
+	if (nr != -1 && nr != vdev->num && warn_if_nr_in_use)
+		printk(KERN_WARNING "%s: requested %s%d, got %s%d\n",
+				__func__, name_base, nr, name_base, vdev->num);
+
 	/* Part 5: Activate this minor. The char device can now be used. */
 	mutex_lock(&videodev_lock);
 	video_device[vdev->minor] = vdev;
@@ -563,8 +570,19 @@ cleanup:
 	vdev->minor = -1;
 	return ret;
 }
+
+int video_register_device(struct video_device *vdev, int type, int nr)
+{
+	return __video_register_device(vdev, type, nr, 1);
+}
 EXPORT_SYMBOL(video_register_device);
 
+int video_register_device_no_warn(struct video_device *vdev, int type, int nr)
+{
+	return __video_register_device(vdev, type, nr, 0);
+}
+EXPORT_SYMBOL(video_register_device_no_warn);
+
 /**
  *	video_unregister_device - unregister a video4linux device
  *	@vdev: the device to unregister
-- 
cgit v1.2.3


From 317b2e2f4b5d2b69d9bd49e4fed386d176344e76 Mon Sep 17 00:00:00 2001
From: Muralidharan Karicheri <m-karicheri2@ti.com>
Date: Wed, 16 Sep 2009 14:30:53 -0300
Subject: V4L/DVB (12906a): V4L : vpif display updates to support vpif capture

The structure name for vpif display driver changed since it was not unique. So this
update is done to reflect the same. Also removed the code related to register
address space iomap. Uses v4l2_i2c_new_subdev_board() instead of
v4l2_i2c_new_probed_subdev() so that platform data can be added for subdevice
configuration for polarities.

This has incorporated comments against version v0 of the patch series.

Resending the original patch for merge to V4L linux-next

Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/davinci/vpif_display.c | 49 ++++++++----------------------
 1 file changed, 13 insertions(+), 36 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/davinci/vpif_display.c b/drivers/media/video/davinci/vpif_display.c
index a125a452d24..c015da813dd 100644
--- a/drivers/media/video/davinci/vpif_display.c
+++ b/drivers/media/video/davinci/vpif_display.c
@@ -683,7 +683,7 @@ static int vpif_release(struct file *filep)
 static int vpif_querycap(struct file *file, void  *priv,
 				struct v4l2_capability *cap)
 {
-	struct vpif_config *config = vpif_dev->platform_data;
+	struct vpif_display_config *config = vpif_dev->platform_data;
 
 	cap->version = VPIF_DISPLAY_VERSION_CODE;
 	cap->capabilities = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING;
@@ -1053,7 +1053,7 @@ static int vpif_streamon(struct file *file, void *priv,
 	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
 	struct channel_obj *oth_ch = vpif_obj.dev[!ch->channel_id];
 	struct vpif_params *vpif = &ch->vpifparams;
-	struct vpif_config *vpif_config_data =
+	struct vpif_display_config *vpif_config_data =
 					vpif_dev->platform_data;
 	unsigned long addr = 0;
 	int ret = 0;
@@ -1239,7 +1239,7 @@ static int vpif_enum_output(struct file *file, void *fh,
 				struct v4l2_output *output)
 {
 
-	struct vpif_config *config = vpif_dev->platform_data;
+	struct vpif_display_config *config = vpif_dev->platform_data;
 
 	if (output->index >= config->output_count) {
 		vpif_dbg(1, debug, "Invalid output index\n");
@@ -1422,7 +1422,8 @@ vpif_init_free_channel_objects:
  */
 static __init int vpif_probe(struct platform_device *pdev)
 {
-	const struct vpif_subdev_info *subdevdata;
+	struct vpif_subdev_info *subdevdata;
+	struct vpif_display_config *config;
 	int i, j = 0, k, q, m, err = 0;
 	struct i2c_adapter *i2c_adap;
 	struct vpif_config *config;
@@ -1433,30 +1434,14 @@ static __init int vpif_probe(struct platform_device *pdev)
 	int subdev_count;
 
 	vpif_dev = &pdev->dev;
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		v4l2_err(vpif_dev->driver,
-				"Error getting platform resource\n");
-		return -ENOENT;
-	}
 
-	if (!request_mem_region(res->start, res->end - res->start + 1,
-						vpif_dev->driver->name)) {
-		v4l2_err(vpif_dev->driver, "VPIF: failed request_mem_region\n");
-		return -ENXIO;
-	}
+	err = initialize_vpif();
 
-	vpif_base = ioremap_nocache(res->start, res->end - res->start + 1);
-	if (!vpif_base) {
-		v4l2_err(vpif_dev->driver, "Unable to ioremap VPIF reg\n");
-		err = -ENXIO;
-		goto resource_exit;
+	if (err) {
+		v4l2_err(vpif_dev->driver, "Error initializing vpif\n");
+		return err;
 	}
 
-	vpif_base_addr_init(vpif_base);
-
-	initialize_vpif();
-
 	err = v4l2_device_register(vpif_dev, &vpif_obj.v4l2_dev);
 	if (err) {
 		v4l2_err(vpif_dev->driver, "Error registering v4l2 device\n");
@@ -1489,7 +1474,7 @@ static __init int vpif_probe(struct platform_device *pdev)
 				video_device_release(ch->video_dev);
 			}
 			err = -ENOMEM;
-			goto video_dev_alloc_exit;
+			goto vpif_int_err;
 		}
 
 		/* Initialize field of video device */
@@ -1566,10 +1551,10 @@ static __init int vpif_probe(struct platform_device *pdev)
 	}
 
 	for (i = 0; i < subdev_count; i++) {
-		vpif_obj.sd[i] = v4l2_i2c_new_subdev(&vpif_obj.v4l2_dev,
+		vpif_obj.sd[i] = v4l2_i2c_new_subdev_board(&vpif_obj.v4l2_dev,
 						i2c_adap, subdevdata[i].name,
-						subdevdata[i].name,
-						0, I2C_ADDRS(subdevdata[i].addr));
+						&subdevdata[i].board_info,
+						NULL);
 		if (!vpif_obj.sd[i]) {
 			vpif_err("Error registering v4l2 subdevice\n");
 			goto probe_subdev_out;
@@ -1599,11 +1584,6 @@ vpif_int_err:
 		res = platform_get_resource(pdev, IORESOURCE_IRQ, k-1);
 		m = res->end;
 	}
-video_dev_alloc_exit:
-	iounmap(vpif_base);
-resource_exit:
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, res->end - res->start + 1);
 
 	return err;
 }
@@ -1666,9 +1646,6 @@ static void vpif_cleanup(void)
 		i++;
 	}
 
-	iounmap(vpif_base);
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, res->end - res->start + 1);
 	platform_driver_unregister(&vpif_driver);
 	kfree(vpif_obj.sd);
 	for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++)
-- 
cgit v1.2.3


From 89803d83b69c5ce05c590f01a0ba92b99d28b057 Mon Sep 17 00:00:00 2001
From: Muralidharan Karicheri <m-karicheri2@ti.com>
Date: Wed, 16 Sep 2009 14:31:02 -0300
Subject: V4L/DVB (12906b): V4L : vpif capture - Kconfig and Makefile changes

Adds Kconfig and Makefile changes required for vpif capture driver

Resending to merge to V4L linux-next

Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/Kconfig          | 15 +++++++++++++--
 drivers/media/video/davinci/Makefile |  2 ++
 2 files changed, 15 insertions(+), 2 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 9b8f79afe19..dc71eaea6af 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -501,10 +501,21 @@ config DISPLAY_DAVINCI_DM646X_EVM
 	select VIDEO_ADV7343
 	select VIDEO_THS7303
 	help
-	  Support for DaVinci based display device.
+	  Support for DM6467 based display device.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called davincihd_display.
+	  module will be called vpif_display.
+
+config CAPTURE_DAVINCI_DM646X_EVM
+	tristate "DM646x EVM Video Capture"
+	depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
+	select VIDEOBUF_DMA_CONTIG
+	select VIDEO_DAVINCI_VPIF
+	help
+	  Support for DM6467 based capture device.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called vpif_capture.
 
 config VIDEO_DAVINCI_VPIF
 	tristate "DaVinci VPIF Driver"
diff --git a/drivers/media/video/davinci/Makefile b/drivers/media/video/davinci/Makefile
index f44cad2f541..1a8b8f3f182 100644
--- a/drivers/media/video/davinci/Makefile
+++ b/drivers/media/video/davinci/Makefile
@@ -7,6 +7,8 @@ obj-$(CONFIG_VIDEO_DAVINCI_VPIF) += vpif.o
 
 #DM646x EVM Display driver
 obj-$(CONFIG_DISPLAY_DAVINCI_DM646X_EVM) += vpif_display.o
+#DM646x EVM Capture driver
+obj-$(CONFIG_CAPTURE_DAVINCI_DM646X_EVM) += vpif_capture.o
 
 # Capture: DM6446 and DM355
 obj-$(CONFIG_VIDEO_VPSS_SYSTEM) += vpss.o
-- 
cgit v1.2.3


From 6ffefff5a9e76c2e9cb5081e219a7a6a4a5eee9f Mon Sep 17 00:00:00 2001
From: Muralidharan Karicheri <m-karicheri2@ti.com>
Date: Wed, 16 Sep 2009 14:31:10 -0300
Subject: V4L/DVB (12906c): V4L : vpif capture driver for DM6467

This is the vpif capture bridge driver for DM6467.  This video
supports two video channels each having a tvp5147 device at
the input. This allows simultaneous capture of NTSC/PAL video
in each of this channel. Both MMAP and USERPTR io mechanism
are supported. Currently buffer allocation happens at REQBUF
ioctl request. Since USERPTR IO is supported, this is not an
issue since user applications can allocate buffers and pass
the user space address to the driver. Following are TODOs :-
	1) Adding support for allocation of buffers at init
	2) VBI/HBI data service

This has incorporated comments received against version v0
of the patch series.

Resending to merge V4l linux-next
 create mode 100644 drivers/media/video/davinci/vpif_capture.c
 create mode 100644 drivers/media/video/davinci/vpif_capture.h

Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/davinci/vpif_capture.c | 2168 ++++++++++++++++++++++++++++
 drivers/media/video/davinci/vpif_capture.h |  165 +++
 2 files changed, 2333 insertions(+)
 create mode 100644 drivers/media/video/davinci/vpif_capture.c
 create mode 100644 drivers/media/video/davinci/vpif_capture.h

(limited to 'drivers/media')

diff --git a/drivers/media/video/davinci/vpif_capture.c b/drivers/media/video/davinci/vpif_capture.c
new file mode 100644
index 00000000000..d947ee5e4eb
--- /dev/null
+++ b/drivers/media/video/davinci/vpif_capture.c
@@ -0,0 +1,2168 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ * TODO : add support for VBI & HBI data service
+ *	  add static buffer allocation
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/string.h>
+#include <linux/videodev2.h>
+#include <linux/wait.h>
+#include <linux/time.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/version.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+
+#include "vpif_capture.h"
+#include "vpif.h"
+
+MODULE_DESCRIPTION("TI DaVinci VPIF Capture driver");
+MODULE_LICENSE("GPL");
+
+#define vpif_err(fmt, arg...)	v4l2_err(&vpif_obj.v4l2_dev, fmt, ## arg)
+#define vpif_dbg(level, debug, fmt, arg...)	\
+		v4l2_dbg(level, debug, &vpif_obj.v4l2_dev, fmt, ## arg)
+
+static int debug = 1;
+static u32 ch0_numbuffers = 3;
+static u32 ch1_numbuffers = 3;
+static u32 ch0_bufsize = 1920 * 1080 * 2;
+static u32 ch1_bufsize = 720 * 576 * 2;
+
+module_param(debug, int, 0644);
+module_param(ch0_numbuffers, uint, S_IRUGO);
+module_param(ch1_numbuffers, uint, S_IRUGO);
+module_param(ch0_bufsize, uint, S_IRUGO);
+module_param(ch1_bufsize, uint, S_IRUGO);
+
+MODULE_PARM_DESC(debug, "Debug level 0-1");
+MODULE_PARM_DESC(ch2_numbuffers, "Channel0 buffer count (default:3)");
+MODULE_PARM_DESC(ch3_numbuffers, "Channel1 buffer count (default:3)");
+MODULE_PARM_DESC(ch2_bufsize, "Channel0 buffer size (default:1920 x 1080 x 2)");
+MODULE_PARM_DESC(ch3_bufsize, "Channel1 buffer size (default:720 x 576 x 2)");
+
+static struct vpif_config_params config_params = {
+	.min_numbuffers = 3,
+	.numbuffers[0] = 3,
+	.numbuffers[1] = 3,
+	.min_bufsize[0] = 720 * 480 * 2,
+	.min_bufsize[1] = 720 * 480 * 2,
+	.channel_bufsize[0] = 1920 * 1080 * 2,
+	.channel_bufsize[1] = 720 * 576 * 2,
+};
+
+/* global variables */
+static struct vpif_device vpif_obj = { {NULL} };
+static struct device *vpif_dev;
+
+/**
+ * ch_params: video standard configuration parameters for vpif
+ */
+static const struct vpif_channel_config_params ch_params[] = {
+	{
+		"NTSC_M", 720, 480, 30, 0, 1, 268, 1440, 1, 23, 263, 266,
+		286, 525, 525, 0, 1, 0, V4L2_STD_525_60,
+	},
+	{
+		"PAL_BDGHIK", 720, 576, 25, 0, 1, 280, 1440, 1, 23, 311, 313,
+		336, 624, 625, 0, 1, 0, V4L2_STD_625_50,
+	},
+};
+
+/**
+ * vpif_uservirt_to_phys : translate user/virtual address to phy address
+ * @virtp: user/virtual address
+ *
+ * This inline function is used to convert user space virtual address to
+ * physical address.
+ */
+static inline u32 vpif_uservirt_to_phys(u32 virtp)
+{
+	unsigned long physp = 0;
+	struct mm_struct *mm = current->mm;
+	struct vm_area_struct *vma;
+
+	vma = find_vma(mm, virtp);
+
+	/* For kernel direct-mapped memory, take the easy way */
+	if (virtp >= PAGE_OFFSET)
+		physp = virt_to_phys((void *)virtp);
+	else if (vma && (vma->vm_flags & VM_IO) && (vma->vm_pgoff))
+		/**
+		 * this will catch, kernel-allocated, mmaped-to-usermode
+		 * addresses
+		 */
+		physp = (vma->vm_pgoff << PAGE_SHIFT) + (virtp - vma->vm_start);
+	else {
+		/* otherwise, use get_user_pages() for general userland pages */
+		int res, nr_pages = 1;
+			struct page *pages;
+
+		down_read(&current->mm->mmap_sem);
+
+		res = get_user_pages(current, current->mm,
+				     virtp, nr_pages, 1, 0, &pages, NULL);
+		up_read(&current->mm->mmap_sem);
+
+		if (res == nr_pages)
+			physp = __pa(page_address(&pages[0]) +
+				     (virtp & ~PAGE_MASK));
+		else {
+			vpif_err("get_user_pages failed\n");
+			return 0;
+		}
+	}
+	return physp;
+}
+
+/**
+ * buffer_prepare :  callback function for buffer prepare
+ * @q : buffer queue ptr
+ * @vb: ptr to video buffer
+ * @field: field info
+ *
+ * This is the callback function for buffer prepare when videobuf_qbuf()
+ * function is called. The buffer is prepared and user space virtual address
+ * or user address is converted into  physical address
+ */
+static int vpif_buffer_prepare(struct videobuf_queue *q,
+			       struct videobuf_buffer *vb,
+			       enum v4l2_field field)
+{
+	/* Get the file handle object and channel object */
+	struct vpif_fh *fh = q->priv_data;
+	struct channel_obj *ch = fh->channel;
+	struct common_obj *common;
+	unsigned long addr;
+
+
+	vpif_dbg(2, debug, "vpif_buffer_prepare\n");
+
+	common = &ch->common[VPIF_VIDEO_INDEX];
+
+	/* If buffer is not initialized, initialize it */
+	if (VIDEOBUF_NEEDS_INIT == vb->state) {
+		vb->width = common->width;
+		vb->height = common->height;
+		vb->size = vb->width * vb->height;
+		vb->field = field;
+	}
+	vb->state = VIDEOBUF_PREPARED;
+	/**
+	 * if user pointer memory mechanism is used, get the physical
+	 * address of the buffer
+	 */
+	if (V4L2_MEMORY_USERPTR == common->memory) {
+		if (0 == vb->baddr) {
+			vpif_dbg(1, debug, "buffer address is 0\n");
+			return -EINVAL;
+
+		}
+		vb->boff = vpif_uservirt_to_phys(vb->baddr);
+		if (!IS_ALIGNED(vb->boff, 8))
+			goto exit;
+	}
+
+	addr = vb->boff;
+	if (q->streaming) {
+		if (!IS_ALIGNED((addr + common->ytop_off), 8) ||
+		    !IS_ALIGNED((addr + common->ybtm_off), 8) ||
+		    !IS_ALIGNED((addr + common->ctop_off), 8) ||
+		    !IS_ALIGNED((addr + common->cbtm_off), 8))
+			goto exit;
+	}
+	return 0;
+exit:
+	vpif_dbg(1, debug, "buffer_prepare:offset is not aligned to 8 bytes\n");
+	return -EINVAL;
+}
+
+/**
+ * vpif_buffer_setup : Callback function for buffer setup.
+ * @q: buffer queue ptr
+ * @count: number of buffers
+ * @size: size of the buffer
+ *
+ * This callback function is called when reqbuf() is called to adjust
+ * the buffer count and buffer size
+ */
+static int vpif_buffer_setup(struct videobuf_queue *q, unsigned int *count,
+			     unsigned int *size)
+{
+	/* Get the file handle object and channel object */
+	struct vpif_fh *fh = q->priv_data;
+	struct channel_obj *ch = fh->channel;
+	struct common_obj *common;
+
+	common = &ch->common[VPIF_VIDEO_INDEX];
+
+	vpif_dbg(2, debug, "vpif_buffer_setup\n");
+
+	/* If memory type is not mmap, return */
+	if (V4L2_MEMORY_MMAP != common->memory)
+		return 0;
+
+	/* Calculate the size of the buffer */
+	*size = config_params.channel_bufsize[ch->channel_id];
+
+	if (*count < config_params.min_numbuffers)
+		*count = config_params.min_numbuffers;
+	return 0;
+}
+
+/**
+ * vpif_buffer_queue : Callback function to add buffer to DMA queue
+ * @q: ptr to videobuf_queue
+ * @vb: ptr to videobuf_buffer
+ */
+static void vpif_buffer_queue(struct videobuf_queue *q,
+			      struct videobuf_buffer *vb)
+{
+	/* Get the file handle object and channel object */
+	struct vpif_fh *fh = q->priv_data;
+	struct channel_obj *ch = fh->channel;
+	struct common_obj *common;
+
+	common = &ch->common[VPIF_VIDEO_INDEX];
+
+	vpif_dbg(2, debug, "vpif_buffer_queue\n");
+
+	/* add the buffer to the DMA queue */
+	list_add_tail(&vb->queue, &common->dma_queue);
+	/* Change state of the buffer */
+	vb->state = VIDEOBUF_QUEUED;
+}
+
+/**
+ * vpif_buffer_release : Callback function to free buffer
+ * @q: buffer queue ptr
+ * @vb: ptr to video buffer
+ *
+ * This function is called from the videobuf layer to free memory
+ * allocated to  the buffers
+ */
+static void vpif_buffer_release(struct videobuf_queue *q,
+				struct videobuf_buffer *vb)
+{
+	/* Get the file handle object and channel object */
+	struct vpif_fh *fh = q->priv_data;
+	struct channel_obj *ch = fh->channel;
+	struct common_obj *common;
+
+	common = &ch->common[VPIF_VIDEO_INDEX];
+
+	videobuf_dma_contig_free(q, vb);
+	vb->state = VIDEOBUF_NEEDS_INIT;
+}
+
+static struct videobuf_queue_ops video_qops = {
+	.buf_setup = vpif_buffer_setup,
+	.buf_prepare = vpif_buffer_prepare,
+	.buf_queue = vpif_buffer_queue,
+	.buf_release = vpif_buffer_release,
+};
+
+static u8 channel_first_int[VPIF_NUMBER_OF_OBJECTS][2] =
+	{ {1, 1} };
+
+/**
+ * vpif_process_buffer_complete: process a completed buffer
+ * @common: ptr to common channel object
+ *
+ * This function time stamp the buffer and mark it as DONE. It also
+ * wake up any process waiting on the QUEUE and set the next buffer
+ * as current
+ */
+static void vpif_process_buffer_complete(struct common_obj *common)
+{
+	do_gettimeofday(&common->cur_frm->ts);
+	common->cur_frm->state = VIDEOBUF_DONE;
+	wake_up_interruptible(&common->cur_frm->done);
+	/* Make curFrm pointing to nextFrm */
+	common->cur_frm = common->next_frm;
+}
+
+/**
+ * vpif_schedule_next_buffer: set next buffer address for capture
+ * @common : ptr to common channel object
+ *
+ * This function will get next buffer from the dma queue and
+ * set the buffer address in the vpif register for capture.
+ * the buffer is marked active
+ */
+static void vpif_schedule_next_buffer(struct common_obj *common)
+{
+	unsigned long addr = 0;
+
+	common->next_frm = list_entry(common->dma_queue.next,
+				     struct videobuf_buffer, queue);
+	/* Remove that buffer from the buffer queue */
+	list_del(&common->next_frm->queue);
+	common->next_frm->state = VIDEOBUF_ACTIVE;
+	if (V4L2_MEMORY_USERPTR == common->memory)
+		addr = common->next_frm->boff;
+	else
+		addr = videobuf_to_dma_contig(common->next_frm);
+
+	/* Set top and bottom field addresses in VPIF registers */
+	common->set_addr(addr + common->ytop_off,
+			 addr + common->ybtm_off,
+			 addr + common->ctop_off,
+			 addr + common->cbtm_off);
+}
+
+/**
+ * vpif_channel_isr : ISR handler for vpif capture
+ * @irq: irq number
+ * @dev_id: dev_id ptr
+ *
+ * It changes status of the captured buffer, takes next buffer from the queue
+ * and sets its address in VPIF  registers
+ */
+static irqreturn_t vpif_channel_isr(int irq, void *dev_id)
+{
+	struct vpif_device *dev = &vpif_obj;
+	struct common_obj *common;
+	struct channel_obj *ch;
+	enum v4l2_field field;
+	int channel_id = 0;
+	int fid = -1, i;
+
+	channel_id = *(int *)(dev_id);
+	ch = dev->dev[channel_id];
+
+	field = ch->common[VPIF_VIDEO_INDEX].fmt.fmt.pix.field;
+
+	for (i = 0; i < VPIF_NUMBER_OF_OBJECTS; i++) {
+		common = &ch->common[i];
+		/* skip If streaming is not started in this channel */
+		if (0 == common->started)
+			continue;
+
+		/* Check the field format */
+		if (1 == ch->vpifparams.std_info.frm_fmt) {
+			/* Progressive mode */
+			if (list_empty(&common->dma_queue))
+				continue;
+
+			if (!channel_first_int[i][channel_id])
+				vpif_process_buffer_complete(common);
+
+			channel_first_int[i][channel_id] = 0;
+
+			vpif_schedule_next_buffer(common);
+
+
+			channel_first_int[i][channel_id] = 0;
+		} else {
+			/**
+			 * Interlaced mode. If it is first interrupt, ignore
+			 * it
+			 */
+			if (channel_first_int[i][channel_id]) {
+				channel_first_int[i][channel_id] = 0;
+				continue;
+			}
+			if (0 == i) {
+				ch->field_id ^= 1;
+				/* Get field id from VPIF registers */
+				fid = vpif_channel_getfid(ch->channel_id);
+				if (fid != ch->field_id) {
+					/**
+					 * If field id does not match stored
+					 * field id, make them in sync
+					 */
+					if (0 == fid)
+						ch->field_id = fid;
+					return IRQ_HANDLED;
+				}
+			}
+			/* device field id and local field id are in sync */
+			if (0 == fid) {
+				/* this is even field */
+				if (common->cur_frm == common->next_frm)
+					continue;
+
+				/* mark the current buffer as done */
+				vpif_process_buffer_complete(common);
+			} else if (1 == fid) {
+				/* odd field */
+				if (list_empty(&common->dma_queue) ||
+				    (common->cur_frm != common->next_frm))
+					continue;
+
+				vpif_schedule_next_buffer(common);
+			}
+		}
+	}
+	return IRQ_HANDLED;
+}
+
+/**
+ * vpif_update_std_info() - update standard related info
+ * @ch: ptr to channel object
+ *
+ * For a given standard selected by application, update values
+ * in the device data structures
+ */
+static int vpif_update_std_info(struct channel_obj *ch)
+{
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+	struct vpif_params *vpifparams = &ch->vpifparams;
+	const struct vpif_channel_config_params *config;
+	struct vpif_channel_config_params *std_info;
+	struct video_obj *vid_ch = &ch->video;
+	int index;
+
+	vpif_dbg(2, debug, "vpif_update_std_info\n");
+
+	std_info = &vpifparams->std_info;
+
+	for (index = 0; index < ARRAY_SIZE(ch_params); index++) {
+		config = &ch_params[index];
+		if (config->stdid & vid_ch->stdid) {
+			memcpy(std_info, config, sizeof(*config));
+			break;
+		}
+	}
+
+	/* standard not found */
+	if (index == ARRAY_SIZE(ch_params))
+		return -EINVAL;
+
+	common->fmt.fmt.pix.width = std_info->width;
+	common->width = std_info->width;
+	common->fmt.fmt.pix.height = std_info->height;
+	common->height = std_info->height;
+	common->fmt.fmt.pix.bytesperline = std_info->width;
+	vpifparams->video_params.hpitch = std_info->width;
+	vpifparams->video_params.storage_mode = std_info->frm_fmt;
+	return 0;
+}
+
+/**
+ * vpif_calculate_offsets : This function calculates buffers offsets
+ * @ch : ptr to channel object
+ *
+ * This function calculates buffer offsets for Y and C in the top and
+ * bottom field
+ */
+static void vpif_calculate_offsets(struct channel_obj *ch)
+{
+	unsigned int hpitch, vpitch, sizeimage;
+	struct video_obj *vid_ch = &(ch->video);
+	struct vpif_params *vpifparams = &ch->vpifparams;
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+	enum v4l2_field field = common->fmt.fmt.pix.field;
+
+	vpif_dbg(2, debug, "vpif_calculate_offsets\n");
+
+	if (V4L2_FIELD_ANY == field) {
+		if (vpifparams->std_info.frm_fmt)
+			vid_ch->buf_field = V4L2_FIELD_NONE;
+		else
+			vid_ch->buf_field = V4L2_FIELD_INTERLACED;
+	} else
+		vid_ch->buf_field = common->fmt.fmt.pix.field;
+
+	if (V4L2_MEMORY_USERPTR == common->memory)
+		sizeimage = common->fmt.fmt.pix.sizeimage;
+	else
+		sizeimage = config_params.channel_bufsize[ch->channel_id];
+
+	hpitch = common->fmt.fmt.pix.bytesperline;
+	vpitch = sizeimage / (hpitch * 2);
+
+	if ((V4L2_FIELD_NONE == vid_ch->buf_field) ||
+	    (V4L2_FIELD_INTERLACED == vid_ch->buf_field)) {
+		/* Calculate offsets for Y top, Y Bottom, C top and C Bottom */
+		common->ytop_off = 0;
+		common->ybtm_off = hpitch;
+		common->ctop_off = sizeimage / 2;
+		common->cbtm_off = sizeimage / 2 + hpitch;
+	} else if (V4L2_FIELD_SEQ_TB == vid_ch->buf_field) {
+		/* Calculate offsets for Y top, Y Bottom, C top and C Bottom */
+		common->ytop_off = 0;
+		common->ybtm_off = sizeimage / 4;
+		common->ctop_off = sizeimage / 2;
+		common->cbtm_off = common->ctop_off + sizeimage / 4;
+	} else if (V4L2_FIELD_SEQ_BT == vid_ch->buf_field) {
+		/* Calculate offsets for Y top, Y Bottom, C top and C Bottom */
+		common->ybtm_off = 0;
+		common->ytop_off = sizeimage / 4;
+		common->cbtm_off = sizeimage / 2;
+		common->ctop_off = common->cbtm_off + sizeimage / 4;
+	}
+	if ((V4L2_FIELD_NONE == vid_ch->buf_field) ||
+	    (V4L2_FIELD_INTERLACED == vid_ch->buf_field))
+		vpifparams->video_params.storage_mode = 1;
+	else
+		vpifparams->video_params.storage_mode = 0;
+
+	if (1 == vpifparams->std_info.frm_fmt)
+		vpifparams->video_params.hpitch =
+		    common->fmt.fmt.pix.bytesperline;
+	else {
+		if ((field == V4L2_FIELD_ANY)
+		    || (field == V4L2_FIELD_INTERLACED))
+			vpifparams->video_params.hpitch =
+			    common->fmt.fmt.pix.bytesperline * 2;
+		else
+			vpifparams->video_params.hpitch =
+			    common->fmt.fmt.pix.bytesperline;
+	}
+
+	ch->vpifparams.video_params.stdid = vpifparams->std_info.stdid;
+}
+
+/**
+ * vpif_config_format: configure default frame format in the device
+ * ch : ptr to channel object
+ */
+static void vpif_config_format(struct channel_obj *ch)
+{
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+
+	vpif_dbg(2, debug, "vpif_config_format\n");
+
+	common->fmt.fmt.pix.field = V4L2_FIELD_ANY;
+	if (config_params.numbuffers[ch->channel_id] == 0)
+		common->memory = V4L2_MEMORY_USERPTR;
+	else
+		common->memory = V4L2_MEMORY_MMAP;
+
+	common->fmt.fmt.pix.sizeimage
+	    = config_params.channel_bufsize[ch->channel_id];
+
+	if (ch->vpifparams.iface.if_type == VPIF_IF_RAW_BAYER)
+		common->fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_SBGGR8;
+	else
+		common->fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_YUV422P;
+	common->fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+}
+
+/**
+ * vpif_get_default_field() - Get default field type based on interface
+ * @vpif_params - ptr to vpif params
+ */
+static inline enum v4l2_field vpif_get_default_field(
+				struct vpif_interface *iface)
+{
+	return (iface->if_type == VPIF_IF_RAW_BAYER) ? V4L2_FIELD_NONE :
+						V4L2_FIELD_INTERLACED;
+}
+
+/**
+ * vpif_check_format()  - check given pixel format for compatibility
+ * @ch - channel  ptr
+ * @pixfmt - Given pixel format
+ * @update - update the values as per hardware requirement
+ *
+ * Check the application pixel format for S_FMT and update the input
+ * values as per hardware limits for TRY_FMT. The default pixel and
+ * field format is selected based on interface type.
+ */
+static int vpif_check_format(struct channel_obj *ch,
+			     struct v4l2_pix_format *pixfmt,
+			     int update)
+{
+	struct common_obj *common = &(ch->common[VPIF_VIDEO_INDEX]);
+	struct vpif_params *vpif_params = &ch->vpifparams;
+	enum v4l2_field field = pixfmt->field;
+	u32 sizeimage, hpitch, vpitch;
+	int ret = -EINVAL;
+
+	vpif_dbg(2, debug, "vpif_check_format\n");
+	/**
+	 * first check for the pixel format. If if_type is Raw bayer,
+	 * only V4L2_PIX_FMT_SBGGR8 format is supported. Otherwise only
+	 * V4L2_PIX_FMT_YUV422P is supported
+	 */
+	if (vpif_params->iface.if_type == VPIF_IF_RAW_BAYER) {
+		if (pixfmt->pixelformat != V4L2_PIX_FMT_SBGGR8) {
+			if (!update) {
+				vpif_dbg(2, debug, "invalid pix format\n");
+				goto exit;
+			}
+			pixfmt->pixelformat = V4L2_PIX_FMT_SBGGR8;
+		}
+	} else {
+		if (pixfmt->pixelformat != V4L2_PIX_FMT_YUV422P) {
+			if (!update) {
+				vpif_dbg(2, debug, "invalid pixel format\n");
+				goto exit;
+			}
+			pixfmt->pixelformat = V4L2_PIX_FMT_YUV422P;
+		}
+	}
+
+	if (!(VPIF_VALID_FIELD(field))) {
+		if (!update) {
+			vpif_dbg(2, debug, "invalid field format\n");
+			goto exit;
+		}
+		/**
+		 * By default use FIELD_NONE for RAW Bayer capture
+		 * and FIELD_INTERLACED for other interfaces
+		 */
+		field = vpif_get_default_field(&vpif_params->iface);
+	} else if (field == V4L2_FIELD_ANY)
+		/* unsupported field. Use default */
+		field = vpif_get_default_field(&vpif_params->iface);
+
+	/* validate the hpitch */
+	hpitch = pixfmt->bytesperline;
+	if (hpitch < vpif_params->std_info.width) {
+		if (!update) {
+			vpif_dbg(2, debug, "invalid hpitch\n");
+			goto exit;
+		}
+		hpitch = vpif_params->std_info.width;
+	}
+
+	if (V4L2_MEMORY_USERPTR == common->memory)
+		sizeimage = pixfmt->sizeimage;
+	else
+		sizeimage = config_params.channel_bufsize[ch->channel_id];
+
+	vpitch = sizeimage / (hpitch * 2);
+
+	/* validate the vpitch */
+	if (vpitch < vpif_params->std_info.height) {
+		if (!update) {
+			vpif_dbg(2, debug, "Invalid vpitch\n");
+			goto exit;
+		}
+		vpitch = vpif_params->std_info.height;
+	}
+
+	/* Check for 8 byte alignment */
+	if (!ALIGN(hpitch, 8)) {
+		if (!update) {
+			vpif_dbg(2, debug, "invalid pitch alignment\n");
+			goto exit;
+		}
+		/* adjust to next 8 byte boundary */
+		hpitch = (((hpitch + 7) / 8) * 8);
+	}
+	/* if update is set, modify the bytesperline and sizeimage */
+	if (update) {
+		pixfmt->bytesperline = hpitch;
+		pixfmt->sizeimage = hpitch * vpitch * 2;
+	}
+	/**
+	 * Image width and height is always based on current standard width and
+	 * height
+	 */
+	pixfmt->width = common->fmt.fmt.pix.width;
+	pixfmt->height = common->fmt.fmt.pix.height;
+	return 0;
+exit:
+	return ret;
+}
+
+/**
+ * vpif_config_addr() - function to configure buffer address in vpif
+ * @ch - channel ptr
+ * @muxmode - channel mux mode
+ */
+static void vpif_config_addr(struct channel_obj *ch, int muxmode)
+{
+	struct common_obj *common;
+
+	vpif_dbg(2, debug, "vpif_config_addr\n");
+
+	common = &(ch->common[VPIF_VIDEO_INDEX]);
+
+	if (VPIF_CHANNEL1_VIDEO == ch->channel_id)
+		common->set_addr = ch1_set_videobuf_addr;
+	else if (2 == muxmode)
+		common->set_addr = ch0_set_videobuf_addr_yc_nmux;
+	else
+		common->set_addr = ch0_set_videobuf_addr;
+}
+
+/**
+ * vpfe_mmap : It is used to map kernel space buffers into user spaces
+ * @filep: file pointer
+ * @vma: ptr to vm_area_struct
+ */
+static int vpif_mmap(struct file *filep, struct vm_area_struct *vma)
+{
+	/* Get the channel object and file handle object */
+	struct vpif_fh *fh = filep->private_data;
+	struct channel_obj *ch = fh->channel;
+	struct common_obj *common = &(ch->common[VPIF_VIDEO_INDEX]);
+
+	vpif_dbg(2, debug, "vpif_mmap\n");
+
+	return videobuf_mmap_mapper(&common->buffer_queue, vma);
+}
+
+/**
+ * vpif_poll: It is used for select/poll system call
+ * @filep: file pointer
+ * @wait: poll table to wait
+ */
+static unsigned int vpif_poll(struct file *filep, poll_table * wait)
+{
+	int err = 0;
+	struct vpif_fh *fh = filep->private_data;
+	struct channel_obj *channel = fh->channel;
+	struct common_obj *common = &(channel->common[VPIF_VIDEO_INDEX]);
+
+	vpif_dbg(2, debug, "vpif_poll\n");
+
+	if (common->started)
+		err = videobuf_poll_stream(filep, &common->buffer_queue, wait);
+
+	return 0;
+}
+
+/**
+ * vpif_open : vpif open handler
+ * @filep: file ptr
+ *
+ * It creates object of file handle structure and stores it in private_data
+ * member of filepointer
+ */
+static int vpif_open(struct file *filep)
+{
+	struct vpif_capture_config *config = vpif_dev->platform_data;
+	struct video_device *vdev = video_devdata(filep);
+	struct common_obj *common;
+	struct video_obj *vid_ch;
+	struct channel_obj *ch;
+	struct vpif_fh *fh;
+	int i, ret = 0;
+
+	vpif_dbg(2, debug, "vpif_open\n");
+
+	ch = video_get_drvdata(vdev);
+
+	vid_ch = &ch->video;
+	common = &ch->common[VPIF_VIDEO_INDEX];
+
+	if (mutex_lock_interruptible(&common->lock))
+		return -ERESTARTSYS;
+
+	if (NULL == ch->curr_subdev_info) {
+		/**
+		 * search through the sub device to see a registered
+		 * sub device and make it as current sub device
+		 */
+		for (i = 0; i < config->subdev_count; i++) {
+			if (vpif_obj.sd[i]) {
+				/* the sub device is registered */
+				ch->curr_subdev_info = &config->subdev_info[i];
+				/* make first input as the current input */
+				vid_ch->input_idx = 0;
+				break;
+			}
+		}
+		if (i == config->subdev_count) {
+			vpif_err("No sub device registered\n");
+			ret = -ENOENT;
+			goto exit;
+		}
+	}
+
+	/* Allocate memory for the file handle object */
+	fh = kmalloc(sizeof(struct vpif_fh), GFP_KERNEL);
+	if (NULL == fh) {
+		vpif_err("unable to allocate memory for file handle object\n");
+		ret = -ENOMEM;
+		goto exit;
+	}
+
+	/* store pointer to fh in private_data member of filep */
+	filep->private_data = fh;
+	fh->channel = ch;
+	fh->initialized = 0;
+	/* If decoder is not initialized. initialize it */
+	if (!ch->initialized) {
+		fh->initialized = 1;
+		ch->initialized = 1;
+		memset(&(ch->vpifparams), 0, sizeof(struct vpif_params));
+	}
+	/* Increment channel usrs counter */
+	ch->usrs++;
+	/* Set io_allowed member to false */
+	fh->io_allowed[VPIF_VIDEO_INDEX] = 0;
+	/* Initialize priority of this instance to default priority */
+	fh->prio = V4L2_PRIORITY_UNSET;
+	v4l2_prio_open(&ch->prio, &fh->prio);
+exit:
+	mutex_unlock(&common->lock);
+	return ret;
+}
+
+/**
+ * vpif_release : function to clean up file close
+ * @filep: file pointer
+ *
+ * This function deletes buffer queue, frees the buffers and the vpfe file
+ * handle
+ */
+static int vpif_release(struct file *filep)
+{
+	struct vpif_fh *fh = filep->private_data;
+	struct channel_obj *ch = fh->channel;
+	struct common_obj *common;
+
+	vpif_dbg(2, debug, "vpif_release\n");
+
+	common = &ch->common[VPIF_VIDEO_INDEX];
+
+	if (mutex_lock_interruptible(&common->lock))
+		return -ERESTARTSYS;
+
+	/* if this instance is doing IO */
+	if (fh->io_allowed[VPIF_VIDEO_INDEX]) {
+		/* Reset io_usrs member of channel object */
+		common->io_usrs = 0;
+		/* Disable channel as per its device type and channel id */
+		if (VPIF_CHANNEL0_VIDEO == ch->channel_id) {
+			enable_channel0(0);
+			channel0_intr_enable(0);
+		}
+		if ((VPIF_CHANNEL1_VIDEO == ch->channel_id) ||
+		    (2 == common->started)) {
+			enable_channel1(0);
+			channel1_intr_enable(0);
+		}
+		common->started = 0;
+		/* Free buffers allocated */
+		videobuf_queue_cancel(&common->buffer_queue);
+		videobuf_mmap_free(&common->buffer_queue);
+	}
+
+	/* Decrement channel usrs counter */
+	ch->usrs--;
+
+	/* unlock mutex on channel object */
+	mutex_unlock(&common->lock);
+
+	/* Close the priority */
+	v4l2_prio_close(&ch->prio, &fh->prio);
+
+	if (fh->initialized)
+		ch->initialized = 0;
+
+	filep->private_data = NULL;
+	kfree(fh);
+	return 0;
+}
+
+/**
+ * vpif_reqbufs() - request buffer handler
+ * @file: file ptr
+ * @priv: file handle
+ * @reqbuf: request buffer structure ptr
+ */
+static int vpif_reqbufs(struct file *file, void *priv,
+			struct v4l2_requestbuffers *reqbuf)
+{
+	struct vpif_fh *fh = priv;
+	struct channel_obj *ch = fh->channel;
+	struct common_obj *common;
+	u8 index = 0;
+	int ret = 0;
+
+	vpif_dbg(2, debug, "vpif_reqbufs\n");
+
+	/**
+	 * This file handle has not initialized the channel,
+	 * It is not allowed to do settings
+	 */
+	if ((VPIF_CHANNEL0_VIDEO == ch->channel_id)
+	    || (VPIF_CHANNEL1_VIDEO == ch->channel_id)) {
+		if (!fh->initialized) {
+			vpif_dbg(1, debug, "Channel Busy\n");
+			return -EBUSY;
+		}
+	}
+
+	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != reqbuf->type)
+		return -EINVAL;
+
+	index = VPIF_VIDEO_INDEX;
+
+	common = &ch->common[index];
+
+	if (mutex_lock_interruptible(&common->lock))
+		return -ERESTARTSYS;
+
+	if (0 != common->io_usrs) {
+		ret = -EBUSY;
+		goto reqbuf_exit;
+	}
+
+	/* Initialize videobuf queue as per the buffer type */
+	videobuf_queue_dma_contig_init(&common->buffer_queue,
+					    &video_qops, NULL,
+					    &common->irqlock,
+					    reqbuf->type,
+					    common->fmt.fmt.pix.field,
+					    sizeof(struct videobuf_buffer), fh);
+
+	/* Set io allowed member of file handle to TRUE */
+	fh->io_allowed[index] = 1;
+	/* Increment io usrs member of channel object to 1 */
+	common->io_usrs = 1;
+	/* Store type of memory requested in channel object */
+	common->memory = reqbuf->memory;
+	INIT_LIST_HEAD(&common->dma_queue);
+
+	/* Allocate buffers */
+	ret = videobuf_reqbufs(&common->buffer_queue, reqbuf);
+
+reqbuf_exit:
+	mutex_unlock(&common->lock);
+	return ret;
+}
+
+/**
+ * vpif_querybuf() - query buffer handler
+ * @file: file ptr
+ * @priv: file handle
+ * @buf: v4l2 buffer structure ptr
+ */
+static int vpif_querybuf(struct file *file, void *priv,
+				struct v4l2_buffer *buf)
+{
+	struct vpif_fh *fh = priv;
+	struct channel_obj *ch = fh->channel;
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+
+	vpif_dbg(2, debug, "vpif_querybuf\n");
+
+	if (common->fmt.type != buf->type)
+		return -EINVAL;
+
+	if (common->memory != V4L2_MEMORY_MMAP) {
+		vpif_dbg(1, debug, "Invalid memory\n");
+		return -EINVAL;
+	}
+
+	return videobuf_querybuf(&common->buffer_queue, buf);
+}
+
+/**
+ * vpif_qbuf() - query buffer handler
+ * @file: file ptr
+ * @priv: file handle
+ * @buf: v4l2 buffer structure ptr
+ */
+static int vpif_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf)
+{
+
+	struct vpif_fh *fh = priv;
+	struct channel_obj *ch = fh->channel;
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+	struct v4l2_buffer tbuf = *buf;
+	struct videobuf_buffer *buf1;
+	unsigned long addr = 0;
+	unsigned long flags;
+	int ret = 0;
+
+	vpif_dbg(2, debug, "vpif_qbuf\n");
+
+	if (common->fmt.type != tbuf.type) {
+		vpif_err("invalid buffer type\n");
+		return -EINVAL;
+	}
+
+	if (!fh->io_allowed[VPIF_VIDEO_INDEX]) {
+		vpif_err("fh io not allowed \n");
+		return -EACCES;
+	}
+
+	if (!(list_empty(&common->dma_queue)) ||
+	    (common->cur_frm != common->next_frm) ||
+	    !common->started ||
+	    (common->started && (0 == ch->field_id)))
+		return videobuf_qbuf(&common->buffer_queue, buf);
+
+	/* bufferqueue is empty store buffer address in VPIF registers */
+	mutex_lock(&common->buffer_queue.vb_lock);
+	buf1 = common->buffer_queue.bufs[tbuf.index];
+
+	if ((buf1->state == VIDEOBUF_QUEUED) ||
+	    (buf1->state == VIDEOBUF_ACTIVE)) {
+		vpif_err("invalid state\n");
+		goto qbuf_exit;
+	}
+
+	switch (buf1->memory) {
+	case V4L2_MEMORY_MMAP:
+		if (buf1->baddr == 0)
+			goto qbuf_exit;
+		break;
+
+	case V4L2_MEMORY_USERPTR:
+		if (tbuf.length < buf1->bsize)
+			goto qbuf_exit;
+
+		if ((VIDEOBUF_NEEDS_INIT != buf1->state)
+			    && (buf1->baddr != tbuf.m.userptr))
+			vpif_buffer_release(&common->buffer_queue, buf1);
+			buf1->baddr = tbuf.m.userptr;
+		break;
+
+	default:
+		goto qbuf_exit;
+	}
+
+	local_irq_save(flags);
+	ret = vpif_buffer_prepare(&common->buffer_queue, buf1,
+					common->buffer_queue.field);
+	if (ret < 0) {
+		local_irq_restore(flags);
+		goto qbuf_exit;
+	}
+
+	buf1->state = VIDEOBUF_ACTIVE;
+
+	if (V4L2_MEMORY_USERPTR == common->memory)
+		addr = buf1->boff;
+	else
+		addr = videobuf_to_dma_contig(buf1);
+
+	common->next_frm = buf1;
+	common->set_addr(addr + common->ytop_off,
+			 addr + common->ybtm_off,
+			 addr + common->ctop_off,
+			 addr + common->cbtm_off);
+
+	local_irq_restore(flags);
+	list_add_tail(&buf1->stream, &common->buffer_queue.stream);
+	mutex_unlock(&common->buffer_queue.vb_lock);
+	return 0;
+
+qbuf_exit:
+	mutex_unlock(&common->buffer_queue.vb_lock);
+	return -EINVAL;
+}
+
+/**
+ * vpif_dqbuf() - query buffer handler
+ * @file: file ptr
+ * @priv: file handle
+ * @buf: v4l2 buffer structure ptr
+ */
+static int vpif_dqbuf(struct file *file, void *priv, struct v4l2_buffer *buf)
+{
+	struct vpif_fh *fh = priv;
+	struct channel_obj *ch = fh->channel;
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+
+	vpif_dbg(2, debug, "vpif_dqbuf\n");
+
+	return videobuf_dqbuf(&common->buffer_queue, buf,
+					file->f_flags & O_NONBLOCK);
+}
+
+/**
+ * vpif_streamon() - streamon handler
+ * @file: file ptr
+ * @priv: file handle
+ * @buftype: v4l2 buffer type
+ */
+static int vpif_streamon(struct file *file, void *priv,
+				enum v4l2_buf_type buftype)
+{
+
+	struct vpif_capture_config *config = vpif_dev->platform_data;
+	struct vpif_fh *fh = priv;
+	struct channel_obj *ch = fh->channel;
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+	struct channel_obj *oth_ch = vpif_obj.dev[!ch->channel_id];
+	struct vpif_params *vpif;
+	unsigned long addr = 0;
+	int ret = 0;
+
+	vpif_dbg(2, debug, "vpif_streamon\n");
+
+	vpif = &ch->vpifparams;
+
+	if (buftype != V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+		vpif_dbg(1, debug, "buffer type not supported\n");
+		return -EINVAL;
+	}
+
+	/* If file handle is not allowed IO, return error */
+	if (!fh->io_allowed[VPIF_VIDEO_INDEX]) {
+		vpif_dbg(1, debug, "io not allowed\n");
+		return -EACCES;
+	}
+
+	/* If Streaming is already started, return error */
+	if (common->started) {
+		vpif_dbg(1, debug, "channel->started\n");
+		return -EBUSY;
+	}
+
+	if ((ch->channel_id == VPIF_CHANNEL0_VIDEO &&
+	    oth_ch->common[VPIF_VIDEO_INDEX].started &&
+	    vpif->std_info.ycmux_mode == 0) ||
+	   ((ch->channel_id == VPIF_CHANNEL1_VIDEO) &&
+	    (2 == oth_ch->common[VPIF_VIDEO_INDEX].started))) {
+		vpif_dbg(1, debug, "other channel is being used\n");
+		return -EBUSY;
+	}
+
+	ret = vpif_check_format(ch, &common->fmt.fmt.pix, 0);
+	if (ret)
+		return ret;
+
+	/* Enable streamon on the sub device */
+	ret = v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index], video,
+				s_stream, 1);
+
+	if (ret && (ret != -ENOIOCTLCMD)) {
+		vpif_dbg(1, debug, "stream on failed in subdev\n");
+		return ret;
+	}
+
+	/* Call videobuf_streamon to start streaming in videobuf */
+	ret = videobuf_streamon(&common->buffer_queue);
+	if (ret) {
+		vpif_dbg(1, debug, "videobuf_streamon\n");
+		return ret;
+	}
+
+	if (mutex_lock_interruptible(&common->lock)) {
+		ret = -ERESTARTSYS;
+		goto streamoff_exit;
+	}
+
+	/* If buffer queue is empty, return error */
+	if (list_empty(&common->dma_queue)) {
+		vpif_dbg(1, debug, "buffer queue is empty\n");
+		ret = -EIO;
+		goto exit;
+	}
+
+	/* Get the next frame from the buffer queue */
+	common->cur_frm = list_entry(common->dma_queue.next,
+				    struct videobuf_buffer, queue);
+	common->next_frm = common->cur_frm;
+
+	/* Remove buffer from the buffer queue */
+	list_del(&common->cur_frm->queue);
+	/* Mark state of the current frame to active */
+	common->cur_frm->state = VIDEOBUF_ACTIVE;
+	/* Initialize field_id and started member */
+	ch->field_id = 0;
+	common->started = 1;
+
+	if (V4L2_MEMORY_USERPTR == common->memory)
+		addr = common->cur_frm->boff;
+	else
+		addr = videobuf_to_dma_contig(common->cur_frm);
+
+	/* Calculate the offset for Y and C data in the buffer */
+	vpif_calculate_offsets(ch);
+
+	if ((vpif->std_info.frm_fmt &&
+	    ((common->fmt.fmt.pix.field != V4L2_FIELD_NONE) &&
+	     (common->fmt.fmt.pix.field != V4L2_FIELD_ANY))) ||
+	    (!vpif->std_info.frm_fmt &&
+	     (common->fmt.fmt.pix.field == V4L2_FIELD_NONE))) {
+		vpif_dbg(1, debug, "conflict in field format and std format\n");
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	/* configure 1 or 2 channel mode */
+	ret = config->setup_input_channel_mode(vpif->std_info.ycmux_mode);
+
+	if (ret < 0) {
+		vpif_dbg(1, debug, "can't set vpif channel mode\n");
+		goto exit;
+	}
+
+	/* Call vpif_set_params function to set the parameters and addresses */
+	ret = vpif_set_video_params(vpif, ch->channel_id);
+
+	if (ret < 0) {
+		vpif_dbg(1, debug, "can't set video params\n");
+		goto exit;
+	}
+
+	common->started = ret;
+	vpif_config_addr(ch, ret);
+
+	common->set_addr(addr + common->ytop_off,
+			 addr + common->ybtm_off,
+			 addr + common->ctop_off,
+			 addr + common->cbtm_off);
+
+	/**
+	 * Set interrupt for both the fields in VPIF Register enable channel in
+	 * VPIF register
+	 */
+	if ((VPIF_CHANNEL0_VIDEO == ch->channel_id)) {
+		channel0_intr_assert();
+		channel0_intr_enable(1);
+		enable_channel0(1);
+	}
+	if ((VPIF_CHANNEL1_VIDEO == ch->channel_id) ||
+	    (common->started == 2)) {
+		channel1_intr_assert();
+		channel1_intr_enable(1);
+		enable_channel1(1);
+	}
+	channel_first_int[VPIF_VIDEO_INDEX][ch->channel_id] = 1;
+	mutex_unlock(&common->lock);
+	return ret;
+
+exit:
+	mutex_unlock(&common->lock);
+streamoff_exit:
+	ret = videobuf_streamoff(&common->buffer_queue);
+	return ret;
+}
+
+/**
+ * vpif_streamoff() - streamoff handler
+ * @file: file ptr
+ * @priv: file handle
+ * @buftype: v4l2 buffer type
+ */
+static int vpif_streamoff(struct file *file, void *priv,
+				enum v4l2_buf_type buftype)
+{
+
+	struct vpif_fh *fh = priv;
+	struct channel_obj *ch = fh->channel;
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+	int ret;
+
+	vpif_dbg(2, debug, "vpif_streamoff\n");
+
+	if (buftype != V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+		vpif_dbg(1, debug, "buffer type not supported\n");
+		return -EINVAL;
+	}
+
+	/* If io is allowed for this file handle, return error */
+	if (!fh->io_allowed[VPIF_VIDEO_INDEX]) {
+		vpif_dbg(1, debug, "io not allowed\n");
+		return -EACCES;
+	}
+
+	/* If streaming is not started, return error */
+	if (!common->started) {
+		vpif_dbg(1, debug, "channel->started\n");
+		return -EINVAL;
+	}
+
+	if (mutex_lock_interruptible(&common->lock))
+		return -ERESTARTSYS;
+
+	/* disable channel */
+	if (VPIF_CHANNEL0_VIDEO == ch->channel_id) {
+		enable_channel0(0);
+		channel0_intr_enable(0);
+	} else {
+		enable_channel1(0);
+		channel1_intr_enable(0);
+	}
+
+	common->started = 0;
+
+	ret = v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index], video,
+				s_stream, 0);
+
+	if (ret && (ret != -ENOIOCTLCMD))
+		vpif_dbg(1, debug, "stream off failed in subdev\n");
+
+	mutex_unlock(&common->lock);
+
+	return videobuf_streamoff(&common->buffer_queue);
+}
+
+/**
+ * vpif_map_sub_device_to_input() - Maps sub device to input
+ * @ch - ptr to channel
+ * @config - ptr to capture configuration
+ * @input_index - Given input index from application
+ * @sub_device_index - index into sd table
+ *
+ * lookup the sub device information for a given input index.
+ * we report all the inputs to application. inputs table also
+ * has sub device name for the each input
+ */
+static struct vpif_subdev_info *vpif_map_sub_device_to_input(
+				struct channel_obj *ch,
+				struct vpif_capture_config *vpif_cfg,
+				int input_index,
+				int *sub_device_index)
+{
+	struct vpif_capture_chan_config *chan_cfg;
+	struct vpif_subdev_info *subdev_info = NULL;
+	const char *subdev_name = NULL;
+	int i;
+
+	vpif_dbg(2, debug, "vpif_map_sub_device_to_input\n");
+
+	chan_cfg = &vpif_cfg->chan_config[ch->channel_id];
+
+	/**
+	 * search through the inputs to find the sub device supporting
+	 * the input
+	 */
+	for (i = 0; i < chan_cfg->input_count; i++) {
+		/* For each sub device, loop through input */
+		if (i == input_index) {
+			subdev_name = chan_cfg->inputs[i].subdev_name;
+			break;
+		}
+	}
+
+	/* if reached maximum. return null */
+	if (i == chan_cfg->input_count || (NULL == subdev_name))
+		return subdev_info;
+
+	/* loop through the sub device list to get the sub device info */
+	for (i = 0; i < vpif_cfg->subdev_count; i++) {
+		subdev_info = &vpif_cfg->subdev_info[i];
+		if (!strcmp(subdev_info->name, subdev_name))
+			break;
+	}
+
+	if (i == vpif_cfg->subdev_count)
+		return subdev_info;
+
+	/* check if the sub device is registered */
+	if (NULL == vpif_obj.sd[i])
+		return NULL;
+
+	*sub_device_index = i;
+	return subdev_info;
+}
+
+/**
+ * vpif_querystd() - querystd handler
+ * @file: file ptr
+ * @priv: file handle
+ * @std_id: ptr to std id
+ *
+ * This function is called to detect standard at the selected input
+ */
+static int vpif_querystd(struct file *file, void *priv, v4l2_std_id *std_id)
+{
+	struct vpif_fh *fh = priv;
+	struct channel_obj *ch = fh->channel;
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+	int ret = 0;
+
+	vpif_dbg(2, debug, "vpif_querystd\n");
+
+	if (mutex_lock_interruptible(&common->lock))
+		return -ERESTARTSYS;
+
+	/* Call querystd function of decoder device */
+	ret = v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index], video,
+				querystd, std_id);
+	if (ret < 0)
+		vpif_dbg(1, debug, "Failed to set standard for sub devices\n");
+
+	mutex_unlock(&common->lock);
+	return ret;
+}
+
+/**
+ * vpif_g_std() - get STD handler
+ * @file: file ptr
+ * @priv: file handle
+ * @std_id: ptr to std id
+ */
+static int vpif_g_std(struct file *file, void *priv, v4l2_std_id *std)
+{
+	struct vpif_fh *fh = priv;
+	struct channel_obj *ch = fh->channel;
+
+	vpif_dbg(2, debug, "vpif_g_std\n");
+
+	*std = ch->video.stdid;
+	return 0;
+}
+
+/**
+ * vpif_s_std() - set STD handler
+ * @file: file ptr
+ * @priv: file handle
+ * @std_id: ptr to std id
+ */
+static int vpif_s_std(struct file *file, void *priv, v4l2_std_id *std_id)
+{
+	struct vpif_fh *fh = priv;
+	struct channel_obj *ch = fh->channel;
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+	int ret = 0;
+
+	vpif_dbg(2, debug, "vpif_s_std\n");
+
+	if (common->started) {
+		vpif_err("streaming in progress\n");
+		return -EBUSY;
+	}
+
+	if ((VPIF_CHANNEL0_VIDEO == ch->channel_id) ||
+	    (VPIF_CHANNEL1_VIDEO == ch->channel_id)) {
+		if (!fh->initialized) {
+			vpif_dbg(1, debug, "Channel Busy\n");
+			return -EBUSY;
+		}
+	}
+
+	ret = v4l2_prio_check(&ch->prio, &fh->prio);
+	if (0 != ret)
+		return ret;
+
+	fh->initialized = 1;
+
+	/* Call encoder subdevice function to set the standard */
+	if (mutex_lock_interruptible(&common->lock))
+		return -ERESTARTSYS;
+
+	ch->video.stdid = *std_id;
+
+	/* Get the information about the standard */
+	if (vpif_update_std_info(ch)) {
+		ret = -EINVAL;
+		vpif_err("Error getting the standard info\n");
+		goto s_std_exit;
+	}
+
+	/* Configure the default format information */
+	vpif_config_format(ch);
+
+	/* set standard in the sub device */
+	ret = v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index], core,
+				s_std, *std_id);
+	if (ret < 0)
+		vpif_dbg(1, debug, "Failed to set standard for sub devices\n");
+
+s_std_exit:
+	mutex_unlock(&common->lock);
+	return ret;
+}
+
+/**
+ * vpif_enum_input() - ENUMINPUT handler
+ * @file: file ptr
+ * @priv: file handle
+ * @input: ptr to input structure
+ */
+static int vpif_enum_input(struct file *file, void *priv,
+				struct v4l2_input *input)
+{
+
+	struct vpif_capture_config *config = vpif_dev->platform_data;
+	struct vpif_capture_chan_config *chan_cfg;
+	struct vpif_fh *fh = priv;
+	struct channel_obj *ch = fh->channel;
+
+	chan_cfg = &config->chan_config[ch->channel_id];
+
+	if (input->index >= chan_cfg->input_count) {
+		vpif_dbg(1, debug, "Invalid input index\n");
+		return -EINVAL;
+	}
+
+	memcpy(input, &chan_cfg->inputs[input->index].input,
+		sizeof(*input));
+	return 0;
+}
+
+/**
+ * vpif_g_input() - Get INPUT handler
+ * @file: file ptr
+ * @priv: file handle
+ * @index: ptr to input index
+ */
+static int vpif_g_input(struct file *file, void *priv, unsigned int *index)
+{
+	struct vpif_fh *fh = priv;
+	struct channel_obj *ch = fh->channel;
+	struct video_obj *vid_ch = &ch->video;
+
+	*index = vid_ch->input_idx;
+
+	return 0;
+}
+
+/**
+ * vpif_s_input() - Set INPUT handler
+ * @file: file ptr
+ * @priv: file handle
+ * @index: input index
+ */
+static int vpif_s_input(struct file *file, void *priv, unsigned int index)
+{
+	struct vpif_capture_config *config = vpif_dev->platform_data;
+	struct vpif_capture_chan_config *chan_cfg;
+	struct vpif_fh *fh = priv;
+	struct channel_obj *ch = fh->channel;
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+	struct video_obj *vid_ch = &ch->video;
+	struct vpif_subdev_info *subdev_info;
+	int ret = 0, sd_index = 0;
+	u32 input = 0, output = 0;
+
+	chan_cfg = &config->chan_config[ch->channel_id];
+
+	if (common->started) {
+		vpif_err("Streaming in progress\n");
+		return -EBUSY;
+	}
+
+	if ((VPIF_CHANNEL0_VIDEO == ch->channel_id) ||
+	    (VPIF_CHANNEL1_VIDEO == ch->channel_id)) {
+		if (!fh->initialized) {
+			vpif_dbg(1, debug, "Channel Busy\n");
+			return -EBUSY;
+		}
+	}
+
+	ret = v4l2_prio_check(&ch->prio, &fh->prio);
+	if (0 != ret)
+		return ret;
+
+	fh->initialized = 1;
+	subdev_info = vpif_map_sub_device_to_input(ch, config, index,
+						   &sd_index);
+	if (NULL == subdev_info) {
+		vpif_dbg(1, debug,
+			"couldn't lookup sub device for the input index\n");
+		return -EINVAL;
+	}
+
+	if (mutex_lock_interruptible(&common->lock))
+		return -ERESTARTSYS;
+
+	/* first setup input path from sub device to vpif */
+	if (config->setup_input_path) {
+		ret = config->setup_input_path(ch->channel_id,
+					       subdev_info->name);
+		if (ret < 0) {
+			vpif_dbg(1, debug, "couldn't setup input path for the"
+				" sub device %s, for input index %d\n",
+				subdev_info->name, index);
+			goto exit;
+		}
+	}
+
+	if (subdev_info->can_route) {
+		input = subdev_info->input;
+		output = subdev_info->output;
+		ret = v4l2_subdev_call(vpif_obj.sd[sd_index], video, s_routing,
+					input, output, 0);
+		if (ret < 0) {
+			vpif_dbg(1, debug, "Failed to set input\n");
+			goto exit;
+		}
+	}
+	vid_ch->input_idx = index;
+	ch->curr_subdev_info = subdev_info;
+	ch->curr_sd_index = sd_index;
+	/* copy interface parameters to vpif */
+	ch->vpifparams.iface = subdev_info->vpif_if;
+
+	/* update tvnorms from the sub device input info */
+	ch->video_dev->tvnorms = chan_cfg->inputs[index].input.std;
+
+exit:
+	mutex_unlock(&common->lock);
+	return ret;
+}
+
+/**
+ * vpif_enum_fmt_vid_cap() - ENUM_FMT handler
+ * @file: file ptr
+ * @priv: file handle
+ * @index: input index
+ */
+static int vpif_enum_fmt_vid_cap(struct file *file, void  *priv,
+					struct v4l2_fmtdesc *fmt)
+{
+	struct vpif_fh *fh = priv;
+	struct channel_obj *ch = fh->channel;
+
+	if (fmt->index != 0) {
+		vpif_dbg(1, debug, "Invalid format index\n");
+		return -EINVAL;
+	}
+
+	/* Fill in the information about format */
+	if (ch->vpifparams.iface.if_type == VPIF_IF_RAW_BAYER) {
+		fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+		strcpy(fmt->description, "Raw Mode -Bayer Pattern GrRBGb");
+		fmt->pixelformat = V4L2_PIX_FMT_SBGGR8;
+	} else {
+		fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+		strcpy(fmt->description, "YCbCr4:2:2 YC Planar");
+		fmt->pixelformat = V4L2_PIX_FMT_YUV422P;
+	}
+	return 0;
+}
+
+/**
+ * vpif_try_fmt_vid_cap() - TRY_FMT handler
+ * @file: file ptr
+ * @priv: file handle
+ * @fmt: ptr to v4l2 format structure
+ */
+static int vpif_try_fmt_vid_cap(struct file *file, void *priv,
+				struct v4l2_format *fmt)
+{
+	struct vpif_fh *fh = priv;
+	struct channel_obj *ch = fh->channel;
+	struct v4l2_pix_format *pixfmt = &fmt->fmt.pix;
+
+	return vpif_check_format(ch, pixfmt, 1);
+}
+
+
+/**
+ * vpif_g_fmt_vid_cap() - Set INPUT handler
+ * @file: file ptr
+ * @priv: file handle
+ * @fmt: ptr to v4l2 format structure
+ */
+static int vpif_g_fmt_vid_cap(struct file *file, void *priv,
+				struct v4l2_format *fmt)
+{
+	struct vpif_fh *fh = priv;
+	struct channel_obj *ch = fh->channel;
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+
+	/* Check the validity of the buffer type */
+	if (common->fmt.type != fmt->type)
+		return -EINVAL;
+
+	/* Fill in the information about format */
+	if (mutex_lock_interruptible(&common->lock))
+		return -ERESTARTSYS;
+
+	*fmt = common->fmt;
+	mutex_unlock(&common->lock);
+	return 0;
+}
+
+/**
+ * vpif_s_fmt_vid_cap() - Set FMT handler
+ * @file: file ptr
+ * @priv: file handle
+ * @fmt: ptr to v4l2 format structure
+ */
+static int vpif_s_fmt_vid_cap(struct file *file, void *priv,
+				struct v4l2_format *fmt)
+{
+	struct vpif_fh *fh = priv;
+	struct channel_obj *ch = fh->channel;
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+	struct v4l2_pix_format *pixfmt;
+	int ret = 0;
+
+	vpif_dbg(2, debug, "VIDIOC_S_FMT\n");
+
+	/* If streaming is started, return error */
+	if (common->started) {
+		vpif_dbg(1, debug, "Streaming is started\n");
+		return -EBUSY;
+	}
+
+	if ((VPIF_CHANNEL0_VIDEO == ch->channel_id) ||
+	    (VPIF_CHANNEL1_VIDEO == ch->channel_id)) {
+		if (!fh->initialized) {
+			vpif_dbg(1, debug, "Channel Busy\n");
+			return -EBUSY;
+		}
+	}
+
+	ret = v4l2_prio_check(&ch->prio, &fh->prio);
+	if (0 != ret)
+		return ret;
+
+	fh->initialized = 1;
+
+	pixfmt = &fmt->fmt.pix;
+	/* Check for valid field format */
+	ret = vpif_check_format(ch, pixfmt, 0);
+
+	if (ret)
+		return ret;
+	/* store the format in the channel object */
+	if (mutex_lock_interruptible(&common->lock))
+		return -ERESTARTSYS;
+
+	common->fmt = *fmt;
+	mutex_unlock(&common->lock);
+
+	return 0;
+}
+
+/**
+ * vpif_querycap() - QUERYCAP handler
+ * @file: file ptr
+ * @priv: file handle
+ * @cap: ptr to v4l2_capability structure
+ */
+static int vpif_querycap(struct file *file, void  *priv,
+				struct v4l2_capability *cap)
+{
+	struct vpif_capture_config *config = vpif_dev->platform_data;
+
+	cap->version = VPIF_CAPTURE_VERSION_CODE;
+	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
+	strlcpy(cap->driver, "vpif capture", sizeof(cap->driver));
+	strlcpy(cap->bus_info, "DM646x Platform", sizeof(cap->bus_info));
+	strlcpy(cap->card, config->card_name, sizeof(cap->card));
+
+	return 0;
+}
+
+/**
+ * vpif_g_priority() - get priority handler
+ * @file: file ptr
+ * @priv: file handle
+ * @prio: ptr to v4l2_priority structure
+ */
+static int vpif_g_priority(struct file *file, void *priv,
+			   enum v4l2_priority *prio)
+{
+	struct vpif_fh *fh = priv;
+	struct channel_obj *ch = fh->channel;
+
+	*prio = v4l2_prio_max(&ch->prio);
+
+	return 0;
+}
+
+/**
+ * vpif_s_priority() - set priority handler
+ * @file: file ptr
+ * @priv: file handle
+ * @prio: ptr to v4l2_priority structure
+ */
+static int vpif_s_priority(struct file *file, void *priv, enum v4l2_priority p)
+{
+	struct vpif_fh *fh = priv;
+	struct channel_obj *ch = fh->channel;
+
+	return v4l2_prio_change(&ch->prio, &fh->prio, p);
+}
+
+/**
+ * vpif_cropcap() - cropcap handler
+ * @file: file ptr
+ * @priv: file handle
+ * @crop: ptr to v4l2_cropcap structure
+ */
+static int vpif_cropcap(struct file *file, void *priv,
+			struct v4l2_cropcap *crop)
+{
+	struct vpif_fh *fh = priv;
+	struct channel_obj *ch = fh->channel;
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+
+	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != crop->type)
+		return -EINVAL;
+
+	crop->bounds.left = 0;
+	crop->bounds.top = 0;
+	crop->bounds.height = common->height;
+	crop->bounds.width = common->width;
+	crop->defrect = crop->bounds;
+	return 0;
+}
+
+/* vpif capture ioctl operations */
+static const struct v4l2_ioctl_ops vpif_ioctl_ops = {
+	.vidioc_querycap        	= vpif_querycap,
+	.vidioc_g_priority		= vpif_g_priority,
+	.vidioc_s_priority		= vpif_s_priority,
+	.vidioc_enum_fmt_vid_cap	= vpif_enum_fmt_vid_cap,
+	.vidioc_g_fmt_vid_cap  		= vpif_g_fmt_vid_cap,
+	.vidioc_s_fmt_vid_cap		= vpif_s_fmt_vid_cap,
+	.vidioc_try_fmt_vid_cap		= vpif_try_fmt_vid_cap,
+	.vidioc_enum_input		= vpif_enum_input,
+	.vidioc_s_input			= vpif_s_input,
+	.vidioc_g_input			= vpif_g_input,
+	.vidioc_reqbufs         	= vpif_reqbufs,
+	.vidioc_querybuf        	= vpif_querybuf,
+	.vidioc_querystd		= vpif_querystd,
+	.vidioc_s_std           	= vpif_s_std,
+	.vidioc_g_std			= vpif_g_std,
+	.vidioc_qbuf            	= vpif_qbuf,
+	.vidioc_dqbuf           	= vpif_dqbuf,
+	.vidioc_streamon        	= vpif_streamon,
+	.vidioc_streamoff       	= vpif_streamoff,
+	.vidioc_cropcap         	= vpif_cropcap,
+};
+
+/* vpif file operations */
+static struct v4l2_file_operations vpif_fops = {
+	.owner = THIS_MODULE,
+	.open = vpif_open,
+	.release = vpif_release,
+	.ioctl = video_ioctl2,
+	.mmap = vpif_mmap,
+	.poll = vpif_poll
+};
+
+/* vpif video template */
+static struct video_device vpif_video_template = {
+	.name		= "vpif",
+	.fops		= &vpif_fops,
+	.minor		= -1,
+	.ioctl_ops	= &vpif_ioctl_ops,
+};
+
+/**
+ * initialize_vpif() - Initialize vpif data structures
+ *
+ * Allocate memory for data structures and initialize them
+ */
+static int initialize_vpif(void)
+{
+	int err = 0, i, j;
+	int free_channel_objects_index;
+
+	/* Default number of buffers should be 3 */
+	if ((ch0_numbuffers > 0) &&
+	    (ch0_numbuffers < config_params.min_numbuffers))
+		ch0_numbuffers = config_params.min_numbuffers;
+	if ((ch1_numbuffers > 0) &&
+	    (ch1_numbuffers < config_params.min_numbuffers))
+		ch1_numbuffers = config_params.min_numbuffers;
+
+	/* Set buffer size to min buffers size if it is invalid */
+	if (ch0_bufsize < config_params.min_bufsize[VPIF_CHANNEL0_VIDEO])
+		ch0_bufsize =
+		    config_params.min_bufsize[VPIF_CHANNEL0_VIDEO];
+	if (ch1_bufsize < config_params.min_bufsize[VPIF_CHANNEL1_VIDEO])
+		ch1_bufsize =
+		    config_params.min_bufsize[VPIF_CHANNEL1_VIDEO];
+
+	config_params.numbuffers[VPIF_CHANNEL0_VIDEO] = ch0_numbuffers;
+	config_params.numbuffers[VPIF_CHANNEL1_VIDEO] = ch1_numbuffers;
+	if (ch0_numbuffers) {
+		config_params.channel_bufsize[VPIF_CHANNEL0_VIDEO]
+		    = ch0_bufsize;
+	}
+	if (ch1_numbuffers) {
+		config_params.channel_bufsize[VPIF_CHANNEL1_VIDEO]
+		    = ch1_bufsize;
+	}
+
+	/* Allocate memory for six channel objects */
+	for (i = 0; i < VPIF_CAPTURE_MAX_DEVICES; i++) {
+		vpif_obj.dev[i] =
+		    kzalloc(sizeof(*vpif_obj.dev[i]), GFP_KERNEL);
+		/* If memory allocation fails, return error */
+		if (!vpif_obj.dev[i]) {
+			free_channel_objects_index = i;
+			err = -ENOMEM;
+			goto vpif_init_free_channel_objects;
+		}
+	}
+	return 0;
+
+vpif_init_free_channel_objects:
+	for (j = 0; j < free_channel_objects_index; j++)
+		kfree(vpif_obj.dev[j]);
+	return err;
+}
+
+/**
+ * vpif_probe : This function probes the vpif capture driver
+ * @pdev: platform device pointer
+ *
+ * This creates device entries by register itself to the V4L2 driver and
+ * initializes fields of each channel objects
+ */
+static __init int vpif_probe(struct platform_device *pdev)
+{
+	struct vpif_subdev_info *subdevdata;
+	struct vpif_capture_config *config;
+	int i, j, k, m, q, err;
+	struct i2c_adapter *i2c_adap;
+	struct channel_obj *ch;
+	struct common_obj *common;
+	struct video_device *vfd;
+	struct resource *res;
+	int subdev_count;
+
+	vpif_dev = &pdev->dev;
+
+	err = initialize_vpif();
+	if (err) {
+		v4l2_err(vpif_dev->driver, "Error initializing vpif\n");
+		return err;
+	}
+
+	k = 0;
+	while ((res = platform_get_resource(pdev, IORESOURCE_IRQ, k))) {
+		for (i = res->start; i <= res->end; i++) {
+			if (request_irq(i, vpif_channel_isr, IRQF_DISABLED,
+					"DM646x_Capture",
+				(void *)(&vpif_obj.dev[k]->channel_id))) {
+				err = -EBUSY;
+				i--;
+				goto vpif_int_err;
+			}
+		}
+		k++;
+	}
+
+	for (i = 0; i < VPIF_CAPTURE_MAX_DEVICES; i++) {
+		/* Get the pointer to the channel object */
+		ch = vpif_obj.dev[i];
+		/* Allocate memory for video device */
+		vfd = video_device_alloc();
+		if (NULL == vfd) {
+			for (j = 0; j < i; j++) {
+				ch = vpif_obj.dev[j];
+				video_device_release(ch->video_dev);
+			}
+			err = -ENOMEM;
+			goto vpif_dev_alloc_err;
+		}
+
+		/* Initialize field of video device */
+		*vfd = vpif_video_template;
+		vfd->v4l2_dev = &vpif_obj.v4l2_dev;
+		vfd->release = video_device_release;
+		snprintf(vfd->name, sizeof(vfd->name),
+			 "DM646x_VPIFCapture_DRIVER_V%d.%d.%d",
+			 (VPIF_CAPTURE_VERSION_CODE >> 16) & 0xff,
+			 (VPIF_CAPTURE_VERSION_CODE >> 8) & 0xff,
+			 (VPIF_CAPTURE_VERSION_CODE) & 0xff);
+		/* Set video_dev to the video device */
+		ch->video_dev = vfd;
+	}
+
+	for (j = 0; j < VPIF_CAPTURE_MAX_DEVICES; j++) {
+		ch = vpif_obj.dev[j];
+		ch->channel_id = j;
+		common = &(ch->common[VPIF_VIDEO_INDEX]);
+		spin_lock_init(&common->irqlock);
+		mutex_init(&common->lock);
+		/* Initialize prio member of channel object */
+		v4l2_prio_init(&ch->prio);
+		err = video_register_device(ch->video_dev,
+					    VFL_TYPE_GRABBER, (j ? 1 : 0));
+		if (err)
+			goto probe_out;
+
+		video_set_drvdata(ch->video_dev, ch);
+
+	}
+
+	i2c_adap = i2c_get_adapter(1);
+	config = pdev->dev.platform_data;
+
+	subdev_count = config->subdev_count;
+	vpif_obj.sd = kmalloc(sizeof(struct v4l2_subdev *) * subdev_count,
+				GFP_KERNEL);
+	if (vpif_obj.sd == NULL) {
+		vpif_err("unable to allocate memory for subdevice pointers\n");
+		err = -ENOMEM;
+		goto probe_out;
+	}
+
+	err = v4l2_device_register(vpif_dev, &vpif_obj.v4l2_dev);
+	if (err) {
+		v4l2_err(vpif_dev->driver, "Error registering v4l2 device\n");
+		goto probe_subdev_out;
+	}
+
+	for (i = 0; i < subdev_count; i++) {
+		subdevdata = &config->subdev_info[i];
+		vpif_obj.sd[i] =
+			v4l2_i2c_new_subdev_board(&vpif_obj.v4l2_dev,
+						  i2c_adap,
+						  subdevdata->name,
+						  &subdevdata->board_info,
+						  NULL);
+
+		if (!vpif_obj.sd[i]) {
+			vpif_err("Error registering v4l2 subdevice\n");
+			goto probe_subdev_out;
+		}
+		v4l2_info(&vpif_obj.v4l2_dev, "registered sub device %s\n",
+			  subdevdata->name);
+
+		if (vpif_obj.sd[i])
+			vpif_obj.sd[i]->grp_id = 1 << i;
+	}
+	v4l2_info(&vpif_obj.v4l2_dev, "DM646x VPIF Capture driver"
+		  " initialized\n");
+
+	return 0;
+
+probe_subdev_out:
+	/* free sub devices memory */
+	kfree(vpif_obj.sd);
+
+	j = VPIF_CAPTURE_MAX_DEVICES;
+probe_out:
+	v4l2_device_unregister(&vpif_obj.v4l2_dev);
+	for (k = 0; k < j; k++) {
+		/* Get the pointer to the channel object */
+		ch = vpif_obj.dev[k];
+		/* Unregister video device */
+		video_unregister_device(ch->video_dev);
+	}
+
+vpif_dev_alloc_err:
+	k = VPIF_CAPTURE_MAX_DEVICES-1;
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, k);
+	i = res->end;
+
+vpif_int_err:
+	for (q = k; q >= 0; q--) {
+		for (m = i; m >= (int)res->start; m--)
+			free_irq(m, (void *)(&vpif_obj.dev[q]->channel_id));
+
+		res = platform_get_resource(pdev, IORESOURCE_IRQ, q-1);
+		if (res)
+			i = res->end;
+	}
+	return err;
+}
+
+/**
+ * vpif_remove() - driver remove handler
+ * @device: ptr to platform device structure
+ *
+ * The vidoe device is unregistered
+ */
+static int vpif_remove(struct platform_device *device)
+{
+	int i;
+	struct channel_obj *ch;
+
+	v4l2_device_unregister(&vpif_obj.v4l2_dev);
+
+	/* un-register device */
+	for (i = 0; i < VPIF_CAPTURE_MAX_DEVICES; i++) {
+		/* Get the pointer to the channel object */
+		ch = vpif_obj.dev[i];
+		/* Unregister video device */
+		video_unregister_device(ch->video_dev);
+	}
+	return 0;
+}
+
+/**
+ * vpif_suspend: vpif device suspend
+ *
+ * TODO: Add suspend code here
+ */
+static int
+vpif_suspend(struct device *dev)
+{
+	return -1;
+}
+
+/**
+ * vpif_resume: vpif device suspend
+ *
+ * TODO: Add resume code here
+ */
+static int
+vpif_resume(struct device *dev)
+{
+	return -1;
+}
+
+static struct dev_pm_ops vpif_dev_pm_ops = {
+	.suspend = vpif_suspend,
+	.resume = vpif_resume,
+};
+
+static struct platform_driver vpif_driver = {
+	.driver	= {
+		.name	= "vpif_capture",
+		.owner	= THIS_MODULE,
+		.pm = &vpif_dev_pm_ops,
+	},
+	.probe = vpif_probe,
+	.remove = vpif_remove,
+};
+
+/**
+ * vpif_init: initialize the vpif driver
+ *
+ * This function registers device and driver to the kernel, requests irq
+ * handler and allocates memory
+ * for channel objects
+ */
+static __init int vpif_init(void)
+{
+	return platform_driver_register(&vpif_driver);
+}
+
+/**
+ * vpif_cleanup : This function clean up the vpif capture resources
+ *
+ * This will un-registers device and driver to the kernel, frees
+ * requested irq handler and de-allocates memory allocated for channel
+ * objects.
+ */
+static void vpif_cleanup(void)
+{
+	struct platform_device *pdev;
+	struct resource *res;
+	int irq_num;
+	int i = 0;
+
+	pdev = container_of(vpif_dev, struct platform_device, dev);
+	while ((res = platform_get_resource(pdev, IORESOURCE_IRQ, i))) {
+		for (irq_num = res->start; irq_num <= res->end; irq_num++)
+			free_irq(irq_num,
+				 (void *)(&vpif_obj.dev[i]->channel_id));
+		i++;
+	}
+
+	platform_driver_unregister(&vpif_driver);
+
+	kfree(vpif_obj.sd);
+	for (i = 0; i < VPIF_CAPTURE_MAX_DEVICES; i++)
+		kfree(vpif_obj.dev[i]);
+}
+
+/* Function for module initialization and cleanup */
+module_init(vpif_init);
+module_exit(vpif_cleanup);
diff --git a/drivers/media/video/davinci/vpif_capture.h b/drivers/media/video/davinci/vpif_capture.h
new file mode 100644
index 00000000000..4e12ec8cac6
--- /dev/null
+++ b/drivers/media/video/davinci/vpif_capture.h
@@ -0,0 +1,165 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef VPIF_CAPTURE_H
+#define VPIF_CAPTURE_H
+
+#ifdef __KERNEL__
+
+/* Header files */
+#include <linux/videodev2.h>
+#include <linux/version.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-device.h>
+#include <media/videobuf-core.h>
+#include <media/videobuf-dma-contig.h>
+#include <mach/dm646x.h>
+
+#include "vpif.h"
+
+/* Macros */
+#define VPIF_MAJOR_RELEASE		0
+#define VPIF_MINOR_RELEASE		0
+#define VPIF_BUILD			1
+#define VPIF_CAPTURE_VERSION_CODE	((VPIF_MAJOR_RELEASE << 16) | \
+	(VPIF_MINOR_RELEASE << 8) | VPIF_BUILD)
+
+#define VPIF_VALID_FIELD(field)		(((V4L2_FIELD_ANY == field) || \
+	(V4L2_FIELD_NONE == field)) || \
+	(((V4L2_FIELD_INTERLACED == field) || \
+	(V4L2_FIELD_SEQ_TB == field)) || \
+	(V4L2_FIELD_SEQ_BT == field)))
+
+#define VPIF_CAPTURE_MAX_DEVICES	2
+#define VPIF_VIDEO_INDEX		0
+#define VPIF_NUMBER_OF_OBJECTS		1
+
+/* Enumerated data type to give id to each device per channel */
+enum vpif_channel_id {
+	VPIF_CHANNEL0_VIDEO = 0,
+	VPIF_CHANNEL1_VIDEO,
+};
+
+struct video_obj {
+	enum v4l2_field buf_field;
+	/* Currently selected or default standard */
+	v4l2_std_id stdid;
+	/* This is to track the last input that is passed to application */
+	u32 input_idx;
+};
+
+struct common_obj {
+	/* Pointer pointing to current v4l2_buffer */
+	struct videobuf_buffer *cur_frm;
+	/* Pointer pointing to current v4l2_buffer */
+	struct videobuf_buffer *next_frm;
+	/*
+	 * This field keeps track of type of buffer exchange mechanism
+	 * user has selected
+	 */
+	enum v4l2_memory memory;
+	/* Used to store pixel format */
+	struct v4l2_format fmt;
+	/* Buffer queue used in video-buf */
+	struct videobuf_queue buffer_queue;
+	/* Queue of filled frames */
+	struct list_head dma_queue;
+	/* Used in video-buf */
+	spinlock_t irqlock;
+	/* lock used to access this structure */
+	struct mutex lock;
+	/* number of users performing IO */
+	u32 io_usrs;
+	/* Indicates whether streaming started */
+	u8 started;
+	/* Function pointer to set the addresses */
+	void (*set_addr) (unsigned long, unsigned long, unsigned long,
+			  unsigned long);
+	/* offset where Y top starts from the starting of the buffer */
+	u32 ytop_off;
+	/* offset where Y bottom starts from the starting of the buffer */
+	u32 ybtm_off;
+	/* offset where C top starts from the starting of the buffer */
+	u32 ctop_off;
+	/* offset where C bottom starts from the starting of the buffer */
+	u32 cbtm_off;
+	/* Indicates width of the image data */
+	u32 width;
+	/* Indicates height of the image data */
+	u32 height;
+};
+
+struct channel_obj {
+	/* Identifies video device for this channel */
+	struct video_device *video_dev;
+	/* Used to keep track of state of the priority */
+	struct v4l2_prio_state prio;
+	/* number of open instances of the channel */
+	int usrs;
+	/* Indicates id of the field which is being displayed */
+	u32 field_id;
+	/* flag to indicate whether decoder is initialized */
+	u8 initialized;
+	/* Identifies channel */
+	enum vpif_channel_id channel_id;
+	/* index into sd table */
+	int curr_sd_index;
+	/* ptr to current sub device information */
+	struct vpif_subdev_info *curr_subdev_info;
+	/* vpif configuration params */
+	struct vpif_params vpifparams;
+	/* common object array */
+	struct common_obj common[VPIF_NUMBER_OF_OBJECTS];
+	/* video object */
+	struct video_obj video;
+};
+
+/* File handle structure */
+struct vpif_fh {
+	/* pointer to channel object for opened device */
+	struct channel_obj *channel;
+	/* Indicates whether this file handle is doing IO */
+	u8 io_allowed[VPIF_NUMBER_OF_OBJECTS];
+	/* Used to keep track priority of this instance */
+	enum v4l2_priority prio;
+	/* Used to indicate channel is initialize or not */
+	u8 initialized;
+};
+
+struct vpif_device {
+	struct v4l2_device v4l2_dev;
+	struct channel_obj *dev[VPIF_CAPTURE_NUM_CHANNELS];
+	struct v4l2_subdev **sd;
+};
+
+struct vpif_config_params {
+	u8 min_numbuffers;
+	u8 numbuffers[VPIF_CAPTURE_NUM_CHANNELS];
+	s8 device_type;
+	u32 min_bufsize[VPIF_CAPTURE_NUM_CHANNELS];
+	u32 channel_bufsize[VPIF_CAPTURE_NUM_CHANNELS];
+	u8 default_device[VPIF_CAPTURE_NUM_CHANNELS];
+	u8 max_device_type;
+};
+/* Struct which keeps track of the line numbers for the sliced vbi service */
+struct vpif_service_line {
+	u16 service_id;
+	u16 service_line[2];
+};
+#endif				/* End of __KERNEL__ */
+#endif				/* VPIF_CAPTURE_H */
-- 
cgit v1.2.3


From d28a6df608fa4fade5e1d7e22d1be652a71412e0 Mon Sep 17 00:00:00 2001
From: Muralidharan Karicheri <m-karicheri2@ti.com>
Date: Wed, 16 Sep 2009 14:31:20 -0300
Subject: V4L/DVB (12906d): V4L : vpif updates for DM6467 vpif capture driver

Following changes done for vpif driver to support vpif capture:-
	1) Current version of display driver defined vpif register
	   space as part for vpif display platform driver resource
	   This is not correct since vpif is common across capture
	   and display drivers. So the resource iomap function is
	   moved to this module
	2) Since there are common registers, a spinlock is added for
	   mutual exclusion.

This has incorporated comments against version v0 of the patch series

Resending to merge to V4L linux-next

Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/davinci/vpif.c | 76 ++++++++++++++++++++++++++++++++++----
 drivers/media/video/davinci/vpif.h | 48 ++++++++++++++----------
 2 files changed, 98 insertions(+), 26 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/davinci/vpif.c b/drivers/media/video/davinci/vpif.c
index aa771268a5a..3b8eac31eca 100644
--- a/drivers/media/video/davinci/vpif.c
+++ b/drivers/media/video/davinci/vpif.c
@@ -19,7 +19,11 @@
 
 #include <linux/init.h>
 #include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
 #include <linux/kernel.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
 
 #include "vpif.h"
 
@@ -31,6 +35,12 @@ MODULE_LICENSE("GPL");
 #define VPIF_CH2_MAX_MODES	(15)
 #define VPIF_CH3_MAX_MODES	(02)
 
+static resource_size_t	res_len;
+static struct resource	*res;
+spinlock_t vpif_lock;
+
+void __iomem *vpif_base;
+
 static inline void vpif_wr_bit(u32 reg, u32 bit, u32 val)
 {
 	if (val)
@@ -151,17 +161,17 @@ static void config_vpif_params(struct vpif_params *vpifparams,
 		else if (config->capture_format) {
 			/* Set the polarity of various pins */
 			vpif_wr_bit(reg, VPIF_CH_FID_POLARITY_BIT,
-					vpifparams->params.raw_params.fid_pol);
+					vpifparams->iface.fid_pol);
 			vpif_wr_bit(reg, VPIF_CH_V_VALID_POLARITY_BIT,
-					vpifparams->params.raw_params.vd_pol);
+					vpifparams->iface.vd_pol);
 			vpif_wr_bit(reg, VPIF_CH_H_VALID_POLARITY_BIT,
-					vpifparams->params.raw_params.hd_pol);
+					vpifparams->iface.hd_pol);
 
 			value = regr(reg);
 			/* Set data width */
 			value &= ((~(unsigned int)(0x3)) <<
 					VPIF_CH_DATA_WIDTH_BIT);
-			value |= ((vpifparams->params.raw_params.data_sz) <<
+			value |= ((vpifparams->params.data_sz) <<
 						     VPIF_CH_DATA_WIDTH_BIT);
 			regw(value, reg);
 		}
@@ -227,8 +237,60 @@ int vpif_channel_getfid(u8 channel_id)
 }
 EXPORT_SYMBOL(vpif_channel_getfid);
 
-void vpif_base_addr_init(void __iomem *base)
+static int __init vpif_probe(struct platform_device *pdev)
+{
+	int status = 0;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENOENT;
+
+	res_len = res->end - res->start + 1;
+
+	res = request_mem_region(res->start, res_len, res->name);
+	if (!res)
+		return -EBUSY;
+
+	vpif_base = ioremap(res->start, res_len);
+	if (!vpif_base) {
+		status = -EBUSY;
+		goto fail;
+	}
+
+	spin_lock_init(&vpif_lock);
+	dev_info(&pdev->dev, "vpif probe success\n");
+	return 0;
+
+fail:
+	release_mem_region(res->start, res_len);
+	return status;
+}
+
+static int vpif_remove(struct platform_device *pdev)
 {
-	vpif_base = base;
+	iounmap(vpif_base);
+	release_mem_region(res->start, res_len);
+	return 0;
 }
-EXPORT_SYMBOL(vpif_base_addr_init);
+
+static struct platform_driver vpif_driver = {
+	.driver = {
+		.name	= "vpif",
+		.owner = THIS_MODULE,
+	},
+	.remove = __devexit_p(vpif_remove),
+	.probe = vpif_probe,
+};
+
+static void vpif_exit(void)
+{
+	platform_driver_unregister(&vpif_driver);
+}
+
+static int __init vpif_init(void)
+{
+	return platform_driver_register(&vpif_driver);
+}
+subsys_initcall(vpif_init);
+module_exit(vpif_exit);
+
diff --git a/drivers/media/video/davinci/vpif.h b/drivers/media/video/davinci/vpif.h
index fca26dcb54d..188841b476e 100644
--- a/drivers/media/video/davinci/vpif.h
+++ b/drivers/media/video/davinci/vpif.h
@@ -19,6 +19,7 @@
 #include <linux/io.h>
 #include <linux/videodev2.h>
 #include <mach/hardware.h>
+#include <mach/dm646x.h>
 
 /* Maximum channel allowed */
 #define VPIF_NUM_CHANNELS		(4)
@@ -26,7 +27,9 @@
 #define VPIF_DISPLAY_NUM_CHANNELS	(2)
 
 /* Macros to read/write registers */
-static void __iomem *vpif_base;
+extern void __iomem *vpif_base;
+extern spinlock_t vpif_lock;
+
 #define regr(reg)               readl((reg) + vpif_base)
 #define regw(value, reg)        writel(value, (reg + vpif_base))
 
@@ -280,6 +283,10 @@ static inline void enable_channel1(int enable)
 /* inline function to enable interrupt for channel0 */
 static inline void channel0_intr_enable(int enable)
 {
+	unsigned long flags;
+
+	spin_lock_irqsave(&vpif_lock, flags);
+
 	if (enable) {
 		regw((regr(VPIF_INTEN) | 0x10), VPIF_INTEN);
 		regw((regr(VPIF_INTEN_SET) | 0x10), VPIF_INTEN_SET);
@@ -292,11 +299,16 @@ static inline void channel0_intr_enable(int enable)
 		regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH0),
 							VPIF_INTEN_SET);
 	}
+	spin_unlock_irqrestore(&vpif_lock, flags);
 }
 
 /* inline function to enable interrupt for channel1 */
 static inline void channel1_intr_enable(int enable)
 {
+	unsigned long flags;
+
+	spin_lock_irqsave(&vpif_lock, flags);
+
 	if (enable) {
 		regw((regr(VPIF_INTEN) | 0x10), VPIF_INTEN);
 		regw((regr(VPIF_INTEN_SET) | 0x10), VPIF_INTEN_SET);
@@ -309,6 +321,7 @@ static inline void channel1_intr_enable(int enable)
 		regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH1),
 							VPIF_INTEN_SET);
 	}
+	spin_unlock_irqrestore(&vpif_lock, flags);
 }
 
 /* inline function to set buffer addresses in case of Y/C non mux mode */
@@ -431,6 +444,10 @@ static inline void enable_channel3(int enable)
 /* inline function to enable interrupt for channel2 */
 static inline void channel2_intr_enable(int enable)
 {
+	unsigned long flags;
+
+	spin_lock_irqsave(&vpif_lock, flags);
+
 	if (enable) {
 		regw((regr(VPIF_INTEN) | 0x10), VPIF_INTEN);
 		regw((regr(VPIF_INTEN_SET) | 0x10), VPIF_INTEN_SET);
@@ -442,11 +459,16 @@ static inline void channel2_intr_enable(int enable)
 		regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH2),
 							VPIF_INTEN_SET);
 	}
+	spin_unlock_irqrestore(&vpif_lock, flags);
 }
 
 /* inline function to enable interrupt for channel3 */
 static inline void channel3_intr_enable(int enable)
 {
+	unsigned long flags;
+
+	spin_lock_irqsave(&vpif_lock, flags);
+
 	if (enable) {
 		regw((regr(VPIF_INTEN) | 0x10), VPIF_INTEN);
 		regw((regr(VPIF_INTEN_SET) | 0x10), VPIF_INTEN_SET);
@@ -459,6 +481,7 @@ static inline void channel3_intr_enable(int enable)
 		regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH3),
 							VPIF_INTEN_SET);
 	}
+	spin_unlock_irqrestore(&vpif_lock, flags);
 }
 
 /* inline function to enable raw vbi data for channel2 */
@@ -571,7 +594,7 @@ struct vpif_channel_config_params {
 	v4l2_std_id stdid;
 };
 
-struct vpif_interface;
+struct vpif_video_params;
 struct vpif_params;
 struct vpif_vbi_params;
 
@@ -579,13 +602,6 @@ int vpif_set_video_params(struct vpif_params *vpifparams, u8 channel_id);
 void vpif_set_vbi_display_params(struct vpif_vbi_params *vbiparams,
 							u8 channel_id);
 int vpif_channel_getfid(u8 channel_id);
-void vpif_base_addr_init(void __iomem *base);
-
-/* Enumerated data types */
-enum vpif_capture_pinpol {
-	VPIF_CAPTURE_PINPOL_SAME	= 0,
-	VPIF_CAPTURE_PINPOL_INVERT	= 1
-};
 
 enum data_size {
 	_8BITS = 0,
@@ -593,13 +609,6 @@ enum data_size {
 	_12BITS,
 };
 
-struct vpif_capture_params_raw {
-	enum data_size data_sz;
-	enum vpif_capture_pinpol fid_pol;
-	enum vpif_capture_pinpol vd_pol;
-	enum vpif_capture_pinpol hd_pol;
-};
-
 /* Structure for vpif parameters for raw vbi data */
 struct vpif_vbi_params {
 	__u32 hstart0;  /* Horizontal start of raw vbi data for first field */
@@ -613,18 +622,19 @@ struct vpif_vbi_params {
 };
 
 /* structure for vpif parameters */
-struct vpif_interface {
+struct vpif_video_params {
 	__u8 storage_mode;	/* Indicates field or frame mode */
 	unsigned long hpitch;
 	v4l2_std_id stdid;
 };
 
 struct vpif_params {
-	struct vpif_interface video_params;
+	struct vpif_interface iface;
+	struct vpif_video_params video_params;
 	struct vpif_channel_config_params std_info;
 	union param {
 		struct vpif_vbi_params	vbi_params;
-		struct vpif_capture_params_raw	raw_params;
+		enum data_size data_sz;
 	} params;
 };
 
-- 
cgit v1.2.3


From ab2058571dc6028e2ff0809ef37c9ae2461b0c74 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Sat, 19 Sep 2009 00:41:18 -0300
Subject: V4L/DVB (12993a): saa7164: Fix compilation warning on i386
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

drivers/media/video/saa7164/saa7164-buffer.c: In function ‘saa7164_buffer_alloc’:
drivers/media/video/saa7164/saa7164-buffer.c:110: warning: cast to pointer from integer of different size
drivers/media/video/saa7164/saa7164-buffer.c:112: warning: cast to pointer from integer of different size

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7164/saa7164-buffer.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7164/saa7164-buffer.c b/drivers/media/video/saa7164/saa7164-buffer.c
index 240c6dcb496..9ca5c83d165 100644
--- a/drivers/media/video/saa7164/saa7164-buffer.c
+++ b/drivers/media/video/saa7164/saa7164-buffer.c
@@ -107,10 +107,10 @@ struct saa7164_buffer *saa7164_buffer_alloc(struct saa7164_tsport *port,
 	memset(buf->pt_cpu, 0xff, buf->pt_size);
 
 	dprintk(DBGLVL_BUF, "%s()   allocated buffer @ 0x%p\n", __func__, buf);
-	dprintk(DBGLVL_BUF, "  pci_cpu @ 0x%p    dma @ 0x%p len = 0x%x\n",
-		buf->cpu, (void *)buf->dma, buf->pci_size);
-	dprintk(DBGLVL_BUF, "   pt_cpu @ 0x%p pt_dma @ 0x%p len = 0x%x\n",
-		buf->pt_cpu, (void *)buf->pt_dma, buf->pt_size);
+	dprintk(DBGLVL_BUF, "  pci_cpu @ 0x%p    dma @ 0x%08lx len = 0x%x\n",
+		buf->cpu, (long)buf->dma, buf->pci_size);
+	dprintk(DBGLVL_BUF, "   pt_cpu @ 0x%p pt_dma @ 0x%08lx len = 0x%x\n",
+		buf->pt_cpu, (long)buf->pt_dma, buf->pt_size);
 
 	/* Format the Page Table Entries to point into the data buffer */
 	for (i = 0 ; i < SAA7164_PT_ENTRIES; i++) {
-- 
cgit v1.2.3


From 0030ec38ce5b50a77287a22bf88a65338da21547 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Sat, 19 Sep 2009 00:49:11 -0300
Subject: V4L/DVB(12993b): gl860: Prevent a potential risk of zeroing a
 floating pointer
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

drivers/media/video/gspca/gl860/gl860.c: In function ‘gl860_build_control_table’:
drivers/media/video/gspca/gl860/gl860.c:119: warning: ‘sd_ctrls’ may be used uninitialized in this function

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/gl860/gl860.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/gl860/gl860.c b/drivers/media/video/gspca/gl860/gl860.c
index 62f4320fd9d..6ef59ac7f50 100644
--- a/drivers/media/video/gspca/gl860/gl860.c
+++ b/drivers/media/video/gspca/gl860/gl860.c
@@ -129,6 +129,8 @@ static int gl860_build_control_table(struct gspca_dev *gspca_dev)
 		sd_ctrls = sd_ctrls_ov2640;
 	else if (_OV9655_)
 		sd_ctrls = sd_ctrls_ov9655;
+	else
+		return 0;
 
 	memset(sd_ctrls, 0, GL860_NCTRLS * sizeof(struct ctrl));
 
-- 
cgit v1.2.3


From 98293ef3e54f9f2175f11b4d14c119a2ff753d61 Mon Sep 17 00:00:00 2001
From: HIRANO Takahito <hiranotaka@zng.info>
Date: Fri, 18 Sep 2009 11:17:54 -0300
Subject: V4L/DVB (12997): Add the DTV_ISDB_TS_ID property for ISDB_S

In ISDB-S, time-devision duplex is used to multiplexing several waves
in the same frequency. Each wave is identified by its own transport
stream ID, or TS ID. We need to provide some way to specify this ID
from user applications to handle ISDB-S frontends.

This code has been tested with the Earthsoft PT1 driver.

[mchehab@infradead.org: Fix merge conflicts with isdbt and rename the new parameter to DTV_ISDBS_TS_ID]
Signed-off-by: HIRANO Takahito <hiranotaka@zng.info>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/dvb-core/dvb_frontend.c | 8 ++++++++
 drivers/media/dvb/dvb-core/dvb_frontend.h | 3 +++
 2 files changed, 11 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index 3c9482660ea..ddf639ed2fd 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -1031,6 +1031,8 @@ static struct dtv_cmds_h dtv_cmds[] = {
 	_DTV_CMD(DTV_ISDBT_LAYERC_SEGMENT_COUNT, 0, 0),
 	_DTV_CMD(DTV_ISDBT_LAYERC_TIME_INTERLEAVING, 0, 0),
 
+	_DTV_CMD(DTV_ISDBS_TS_ID, 1, 0),
+
 	/* Get */
 	[DTV_DISEQC_SLAVE_REPLY] = {
 		.name	= "DTV_DISEQC_SLAVE_REPLY",
@@ -1420,6 +1422,9 @@ static int dtv_property_process_get(struct dvb_frontend *fe,
 	case DTV_ISDBT_LAYERC_TIME_INTERLEAVING:
 		tvp->u.data = fe->dtv_property_cache.layer[2].interleaving;
 		break;
+	case DTV_ISDBS_TS_ID:
+		tvp->u.data = fe->dtv_property_cache.isdbs_ts_id;
+		break;
 	default:
 		r = -1;
 	}
@@ -1571,6 +1576,9 @@ static int dtv_property_process_set(struct dvb_frontend *fe,
 	case DTV_ISDBT_LAYERC_TIME_INTERLEAVING:
 		fe->dtv_property_cache.layer[2].interleaving = tvp->u.data;
 		break;
+	case DTV_ISDBS_TS_ID:
+		fe->dtv_property_cache.isdbs_ts_id = tvp->u.data;
+		break;
 	default:
 		r = -1;
 	}
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h b/drivers/media/dvb/dvb-core/dvb_frontend.h
index 9e46f1772c5..810f07d6324 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.h
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.h
@@ -355,6 +355,9 @@ struct dtv_frontend_properties {
 	    fe_modulation_t	modulation;
 	    u8			interleaving;
 	} layer[3];
+
+	/* ISDB-T specifics */
+	u32			isdbs_ts_id;
 };
 
 struct dvb_frontend {
-- 
cgit v1.2.3


From 3d17fb1be937c8c025fc9f54b4e17e91081e7a4f Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Sun, 23 Aug 2009 00:51:22 -0300
Subject: V4L/DVB (12999): Add a driver for Earthsoft PT1

Add a driver for Earthsoft PT1

Eearthsoft PT1 is a PCI card for Japanese broadcasting with two ISDB-S
and ISDB-T demodulators.

This card has neither MPEG decoder nor conditional access module
onboard. It transmits only compressed and possibly encrypted MPEG data
over the PCI bus, so you need an external software decoder and a
decrypter to watch TV on your computer.

This driver is originally developed by Tomoaki Ishikawa
<tomy@users.sourceforge.jp> by reverse engineering.

[mchehab@redhat.com: renamed isdb_ts to isdbs_ts to use the current standard]
Signed-off-by: HIRANO Takahito <hiranotaka@zng.info>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/Kconfig            |    4 +
 drivers/media/dvb/Makefile           |    2 +-
 drivers/media/dvb/pt1/Kconfig        |   12 +
 drivers/media/dvb/pt1/Makefile       |    5 +
 drivers/media/dvb/pt1/pt1.c          | 1056 ++++++++++++++++++++++++++++++++++
 drivers/media/dvb/pt1/va1j5jf8007s.c |  658 +++++++++++++++++++++
 drivers/media/dvb/pt1/va1j5jf8007s.h |   40 ++
 drivers/media/dvb/pt1/va1j5jf8007t.c |  468 +++++++++++++++
 drivers/media/dvb/pt1/va1j5jf8007t.h |   40 ++
 9 files changed, 2284 insertions(+), 1 deletion(-)
 create mode 100644 drivers/media/dvb/pt1/Kconfig
 create mode 100644 drivers/media/dvb/pt1/Makefile
 create mode 100644 drivers/media/dvb/pt1/pt1.c
 create mode 100644 drivers/media/dvb/pt1/va1j5jf8007s.c
 create mode 100644 drivers/media/dvb/pt1/va1j5jf8007s.h
 create mode 100644 drivers/media/dvb/pt1/va1j5jf8007t.c
 create mode 100644 drivers/media/dvb/pt1/va1j5jf8007t.h

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/Kconfig b/drivers/media/dvb/Kconfig
index 1d0e4b1ef10..35d0817126e 100644
--- a/drivers/media/dvb/Kconfig
+++ b/drivers/media/dvb/Kconfig
@@ -68,6 +68,10 @@ comment "Supported FireWire (IEEE 1394) Adapters"
 	depends on DVB_CORE && IEEE1394
 source "drivers/media/dvb/firewire/Kconfig"
 
+comment "Supported Earthsoft PT1 Adapters"
+	depends on DVB_CORE && PCI && I2C
+source "drivers/media/dvb/pt1/Kconfig"
+
 comment "Supported DVB Frontends"
 	depends on DVB_CORE
 source "drivers/media/dvb/frontends/Kconfig"
diff --git a/drivers/media/dvb/Makefile b/drivers/media/dvb/Makefile
index 6092a5bb5a7..16d262ddb45 100644
--- a/drivers/media/dvb/Makefile
+++ b/drivers/media/dvb/Makefile
@@ -2,6 +2,6 @@
 # Makefile for the kernel multimedia device drivers.
 #
 
-obj-y        := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ dvb-usb/ pluto2/ siano/ dm1105/
+obj-y        := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ dvb-usb/ pluto2/ siano/ dm1105/ pt1/
 
 obj-$(CONFIG_DVB_FIREDTV)	+= firewire/
diff --git a/drivers/media/dvb/pt1/Kconfig b/drivers/media/dvb/pt1/Kconfig
new file mode 100644
index 00000000000..24501d5bf70
--- /dev/null
+++ b/drivers/media/dvb/pt1/Kconfig
@@ -0,0 +1,12 @@
+config DVB_PT1
+	tristate "PT1 cards"
+	depends on DVB_CORE && PCI && I2C
+	help
+	  Support for Earthsoft PT1 PCI cards.
+
+	  Since these cards have no MPEG decoder onboard, they transmit
+	  only compressed MPEG data over the PCI bus, so you need
+	  an external software decoder to watch TV on your computer.
+
+	  Say Y or M if you own such a device and want to use it.
+
diff --git a/drivers/media/dvb/pt1/Makefile b/drivers/media/dvb/pt1/Makefile
new file mode 100644
index 00000000000..a66da17bbe3
--- /dev/null
+++ b/drivers/media/dvb/pt1/Makefile
@@ -0,0 +1,5 @@
+earth-pt1-objs := pt1.o va1j5jf8007s.o va1j5jf8007t.o
+
+obj-$(CONFIG_DVB_PT1) += earth-pt1.o
+
+EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core -Idrivers/media/dvb/frontends
diff --git a/drivers/media/dvb/pt1/pt1.c b/drivers/media/dvb/pt1/pt1.c
new file mode 100644
index 00000000000..ef0f7d235e2
--- /dev/null
+++ b/drivers/media/dvb/pt1/pt1.c
@@ -0,0 +1,1056 @@
+/*
+ * driver for Earthsoft PT1
+ *
+ * Copyright (C) 2009 HIRANO Takahito <hiranotaka@zng.info>
+ *
+ * based on pt1dvr - http://pt1dvr.sourceforge.jp/
+ * 	by Tomoaki Ishikawa <tomy@users.sourceforge.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dmxdev.h"
+#include "dvb_net.h"
+#include "dvb_frontend.h"
+
+#include "va1j5jf8007t.h"
+#include "va1j5jf8007s.h"
+
+#define DRIVER_NAME "earth-pt1"
+
+#define PT1_PAGE_SHIFT 12
+#define PT1_PAGE_SIZE (1 << PT1_PAGE_SHIFT)
+#define PT1_NR_UPACKETS 1024
+#define PT1_NR_BUFS 511
+
+struct pt1_buffer_page {
+	__le32 upackets[PT1_NR_UPACKETS];
+};
+
+struct pt1_table_page {
+	__le32 next_pfn;
+	__le32 buf_pfns[PT1_NR_BUFS];
+};
+
+struct pt1_buffer {
+	struct pt1_buffer_page *page;
+	dma_addr_t addr;
+};
+
+struct pt1_table {
+	struct pt1_table_page *page;
+	dma_addr_t addr;
+	struct pt1_buffer bufs[PT1_NR_BUFS];
+};
+
+#define PT1_NR_ADAPS 4
+
+struct pt1_adapter;
+
+struct pt1 {
+	struct pci_dev *pdev;
+	void __iomem *regs;
+	struct i2c_adapter i2c_adap;
+	int i2c_running;
+	struct pt1_adapter *adaps[PT1_NR_ADAPS];
+	struct pt1_table *tables;
+	struct task_struct *kthread;
+};
+
+struct pt1_adapter {
+	struct pt1 *pt1;
+	int index;
+
+	u8 *buf;
+	int upacket_count;
+	int packet_count;
+
+	struct dvb_adapter adap;
+	struct dvb_demux demux;
+	int users;
+	struct dmxdev dmxdev;
+	struct dvb_net net;
+	struct dvb_frontend *fe;
+	int (*orig_set_voltage)(struct dvb_frontend *fe,
+				fe_sec_voltage_t voltage);
+};
+
+#define pt1_printk(level, pt1, format, arg...)	\
+	dev_printk(level, &(pt1)->pdev->dev, format, ##arg)
+
+static void pt1_write_reg(struct pt1 *pt1, int reg, u32 data)
+{
+	writel(data, pt1->regs + reg * 4);
+}
+
+static u32 pt1_read_reg(struct pt1 *pt1, int reg)
+{
+	return readl(pt1->regs + reg * 4);
+}
+
+static int pt1_nr_tables = 64;
+module_param_named(nr_tables, pt1_nr_tables, int, 0);
+
+static void pt1_increment_table_count(struct pt1 *pt1)
+{
+	pt1_write_reg(pt1, 0, 0x00000020);
+}
+
+static void pt1_init_table_count(struct pt1 *pt1)
+{
+	pt1_write_reg(pt1, 0, 0x00000010);
+}
+
+static void pt1_register_tables(struct pt1 *pt1, u32 first_pfn)
+{
+	pt1_write_reg(pt1, 5, first_pfn);
+	pt1_write_reg(pt1, 0, 0x0c000040);
+}
+
+static void pt1_unregister_tables(struct pt1 *pt1)
+{
+	pt1_write_reg(pt1, 0, 0x08080000);
+}
+
+static int pt1_sync(struct pt1 *pt1)
+{
+	int i;
+	for (i = 0; i < 57; i++) {
+		if (pt1_read_reg(pt1, 0) & 0x20000000)
+			return 0;
+		pt1_write_reg(pt1, 0, 0x00000008);
+	}
+	pt1_printk(KERN_ERR, pt1, "could not sync\n");
+	return -EIO;
+}
+
+static u64 pt1_identify(struct pt1 *pt1)
+{
+	int i;
+	u64 id;
+	id = 0;
+	for (i = 0; i < 57; i++) {
+		id |= (u64)(pt1_read_reg(pt1, 0) >> 30 & 1) << i;
+		pt1_write_reg(pt1, 0, 0x00000008);
+	}
+	return id;
+}
+
+static int pt1_unlock(struct pt1 *pt1)
+{
+	int i;
+	pt1_write_reg(pt1, 0, 0x00000008);
+	for (i = 0; i < 3; i++) {
+		if (pt1_read_reg(pt1, 0) & 0x80000000)
+			return 0;
+		schedule_timeout_uninterruptible((HZ + 999) / 1000);
+	}
+	pt1_printk(KERN_ERR, pt1, "could not unlock\n");
+	return -EIO;
+}
+
+static int pt1_reset_pci(struct pt1 *pt1)
+{
+	int i;
+	pt1_write_reg(pt1, 0, 0x01010000);
+	pt1_write_reg(pt1, 0, 0x01000000);
+	for (i = 0; i < 10; i++) {
+		if (pt1_read_reg(pt1, 0) & 0x00000001)
+			return 0;
+		schedule_timeout_uninterruptible((HZ + 999) / 1000);
+	}
+	pt1_printk(KERN_ERR, pt1, "could not reset PCI\n");
+	return -EIO;
+}
+
+static int pt1_reset_ram(struct pt1 *pt1)
+{
+	int i;
+	pt1_write_reg(pt1, 0, 0x02020000);
+	pt1_write_reg(pt1, 0, 0x02000000);
+	for (i = 0; i < 10; i++) {
+		if (pt1_read_reg(pt1, 0) & 0x00000002)
+			return 0;
+		schedule_timeout_uninterruptible((HZ + 999) / 1000);
+	}
+	pt1_printk(KERN_ERR, pt1, "could not reset RAM\n");
+	return -EIO;
+}
+
+static int pt1_do_enable_ram(struct pt1 *pt1)
+{
+	int i, j;
+	u32 status;
+	status = pt1_read_reg(pt1, 0) & 0x00000004;
+	pt1_write_reg(pt1, 0, 0x00000002);
+	for (i = 0; i < 10; i++) {
+		for (j = 0; j < 1024; j++) {
+			if ((pt1_read_reg(pt1, 0) & 0x00000004) != status)
+				return 0;
+		}
+		schedule_timeout_uninterruptible((HZ + 999) / 1000);
+	}
+	pt1_printk(KERN_ERR, pt1, "could not enable RAM\n");
+	return -EIO;
+}
+
+static int pt1_enable_ram(struct pt1 *pt1)
+{
+	int i, ret;
+	schedule_timeout_uninterruptible((HZ + 999) / 1000);
+	for (i = 0; i < 10; i++) {
+		ret = pt1_do_enable_ram(pt1);
+		if (ret < 0)
+			return ret;
+	}
+	return 0;
+}
+
+static void pt1_disable_ram(struct pt1 *pt1)
+{
+	pt1_write_reg(pt1, 0, 0x0b0b0000);
+}
+
+static void pt1_set_stream(struct pt1 *pt1, int index, int enabled)
+{
+	pt1_write_reg(pt1, 2, 1 << (index + 8) | enabled << index);
+}
+
+static void pt1_init_streams(struct pt1 *pt1)
+{
+	int i;
+	for (i = 0; i < PT1_NR_ADAPS; i++)
+		pt1_set_stream(pt1, i, 0);
+}
+
+static int pt1_filter(struct pt1 *pt1, struct pt1_buffer_page *page)
+{
+	u32 upacket;
+	int i;
+	int index;
+	struct pt1_adapter *adap;
+	int offset;
+	u8 *buf;
+
+	if (!page->upackets[PT1_NR_UPACKETS - 1])
+		return 0;
+
+	for (i = 0; i < PT1_NR_UPACKETS; i++) {
+		upacket = le32_to_cpu(page->upackets[i]);
+		index = (upacket >> 29) - 1;
+		if (index < 0 || index >=  PT1_NR_ADAPS)
+			continue;
+
+		adap = pt1->adaps[index];
+		if (upacket >> 25 & 1)
+			adap->upacket_count = 0;
+		else if (!adap->upacket_count)
+			continue;
+
+		buf = adap->buf;
+		offset = adap->packet_count * 188 + adap->upacket_count * 3;
+		buf[offset] = upacket >> 16;
+		buf[offset + 1] = upacket >> 8;
+		if (adap->upacket_count != 62)
+			buf[offset + 2] = upacket;
+
+		if (++adap->upacket_count >= 63) {
+			adap->upacket_count = 0;
+			if (++adap->packet_count >= 21) {
+				dvb_dmx_swfilter_packets(&adap->demux, buf, 21);
+				adap->packet_count = 0;
+			}
+		}
+	}
+
+	page->upackets[PT1_NR_UPACKETS - 1] = 0;
+	return 1;
+}
+
+static int pt1_thread(void *data)
+{
+	struct pt1 *pt1;
+	int table_index;
+	int buf_index;
+	struct pt1_buffer_page *page;
+
+	pt1 = data;
+	set_freezable();
+
+	table_index = 0;
+	buf_index = 0;
+
+	while (!kthread_should_stop()) {
+		try_to_freeze();
+
+		page = pt1->tables[table_index].bufs[buf_index].page;
+		if (!pt1_filter(pt1, page)) {
+			schedule_timeout_interruptible((HZ + 999) / 1000);
+			continue;
+		}
+
+		if (++buf_index >= PT1_NR_BUFS) {
+			pt1_increment_table_count(pt1);
+			buf_index = 0;
+			if (++table_index >= pt1_nr_tables)
+				table_index = 0;
+		}
+	}
+
+	return 0;
+}
+
+static void pt1_free_page(struct pt1 *pt1, void *page, dma_addr_t addr)
+{
+	dma_free_coherent(&pt1->pdev->dev, PT1_PAGE_SIZE, page, addr);
+}
+
+static void *pt1_alloc_page(struct pt1 *pt1, dma_addr_t *addrp, u32 *pfnp)
+{
+	void *page;
+	dma_addr_t addr;
+
+	page = dma_alloc_coherent(&pt1->pdev->dev, PT1_PAGE_SIZE, &addr,
+				  GFP_KERNEL);
+	if (page == NULL)
+		return NULL;
+
+	BUG_ON(addr & (PT1_PAGE_SIZE - 1));
+	BUG_ON(addr >> PT1_PAGE_SHIFT >> 31 >> 1);
+
+	*addrp = addr;
+	*pfnp = addr >> PT1_PAGE_SHIFT;
+	return page;
+}
+
+static void pt1_cleanup_buffer(struct pt1 *pt1, struct pt1_buffer *buf)
+{
+	pt1_free_page(pt1, buf->page, buf->addr);
+}
+
+static int
+pt1_init_buffer(struct pt1 *pt1, struct pt1_buffer *buf,  u32 *pfnp)
+{
+	struct pt1_buffer_page *page;
+	dma_addr_t addr;
+
+	page = pt1_alloc_page(pt1, &addr, pfnp);
+	if (page == NULL)
+		return -ENOMEM;
+
+	page->upackets[PT1_NR_UPACKETS - 1] = 0;
+
+	buf->page = page;
+	buf->addr = addr;
+	return 0;
+}
+
+static void pt1_cleanup_table(struct pt1 *pt1, struct pt1_table *table)
+{
+	int i;
+
+	for (i = 0; i < PT1_NR_BUFS; i++)
+		pt1_cleanup_buffer(pt1, &table->bufs[i]);
+
+	pt1_free_page(pt1, table->page, table->addr);
+}
+
+static int
+pt1_init_table(struct pt1 *pt1, struct pt1_table *table, u32 *pfnp)
+{
+	struct pt1_table_page *page;
+	dma_addr_t addr;
+	int i, ret;
+	u32 buf_pfn;
+
+	page = pt1_alloc_page(pt1, &addr, pfnp);
+	if (page == NULL)
+		return -ENOMEM;
+
+	for (i = 0; i < PT1_NR_BUFS; i++) {
+		ret = pt1_init_buffer(pt1, &table->bufs[i], &buf_pfn);
+		if (ret < 0)
+			goto err;
+
+		page->buf_pfns[i] = cpu_to_le32(buf_pfn);
+	}
+
+	pt1_increment_table_count(pt1);
+	table->page = page;
+	table->addr = addr;
+	return 0;
+
+err:
+	while (i--)
+		pt1_cleanup_buffer(pt1, &table->bufs[i]);
+
+	pt1_free_page(pt1, page, addr);
+	return ret;
+}
+
+static void pt1_cleanup_tables(struct pt1 *pt1)
+{
+	struct pt1_table *tables;
+	int i;
+
+	tables = pt1->tables;
+	pt1_unregister_tables(pt1);
+
+	for (i = 0; i < pt1_nr_tables; i++)
+		pt1_cleanup_table(pt1, &tables[i]);
+
+	vfree(tables);
+}
+
+static int pt1_init_tables(struct pt1 *pt1)
+{
+	struct pt1_table *tables;
+	int i, ret;
+	u32 first_pfn, pfn;
+
+	tables = vmalloc(sizeof(struct pt1_table) * pt1_nr_tables);
+	if (tables == NULL)
+		return -ENOMEM;
+
+	pt1_init_table_count(pt1);
+
+	i = 0;
+	if (pt1_nr_tables) {
+		ret = pt1_init_table(pt1, &tables[0], &first_pfn);
+		if (ret)
+			goto err;
+		i++;
+	}
+
+	while (i < pt1_nr_tables) {
+		ret = pt1_init_table(pt1, &tables[i], &pfn);
+		if (ret)
+			goto err;
+		tables[i - 1].page->next_pfn = cpu_to_le32(pfn);
+		i++;
+	}
+
+	tables[pt1_nr_tables - 1].page->next_pfn = cpu_to_le32(first_pfn);
+
+	pt1_register_tables(pt1, first_pfn);
+	pt1->tables = tables;
+	return 0;
+
+err:
+	while (i--)
+		pt1_cleanup_table(pt1, &tables[i]);
+
+	vfree(tables);
+	return ret;
+}
+
+static int pt1_start_feed(struct dvb_demux_feed *feed)
+{
+	struct pt1_adapter *adap;
+	adap = container_of(feed->demux, struct pt1_adapter, demux);
+	if (!adap->users++)
+		pt1_set_stream(adap->pt1, adap->index, 1);
+	return 0;
+}
+
+static int pt1_stop_feed(struct dvb_demux_feed *feed)
+{
+	struct pt1_adapter *adap;
+	adap = container_of(feed->demux, struct pt1_adapter, demux);
+	if (!--adap->users)
+		pt1_set_stream(adap->pt1, adap->index, 0);
+	return 0;
+}
+
+static void
+pt1_set_power(struct pt1 *pt1, int power, int lnb, int reset)
+{
+	pt1_write_reg(pt1, 1, power | lnb << 1 | !reset << 3);
+}
+
+static int pt1_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
+{
+	struct pt1_adapter *adap;
+	int lnb;
+
+	adap = container_of(fe->dvb, struct pt1_adapter, adap);
+
+	switch (voltage) {
+	case SEC_VOLTAGE_13: /* actually 11V */
+		lnb = 2;
+		break;
+	case SEC_VOLTAGE_18: /* actually 15V */
+		lnb = 3;
+		break;
+	case SEC_VOLTAGE_OFF:
+		lnb = 0;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	pt1_set_power(adap->pt1, 1, lnb, 0);
+
+	if (adap->orig_set_voltage)
+		return adap->orig_set_voltage(fe, voltage);
+	else
+		return 0;
+}
+
+static void pt1_free_adapter(struct pt1_adapter *adap)
+{
+	dvb_unregister_frontend(adap->fe);
+	dvb_net_release(&adap->net);
+	adap->demux.dmx.close(&adap->demux.dmx);
+	dvb_dmxdev_release(&adap->dmxdev);
+	dvb_dmx_release(&adap->demux);
+	dvb_unregister_adapter(&adap->adap);
+	free_page((unsigned long)adap->buf);
+	kfree(adap);
+}
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+static struct pt1_adapter *
+pt1_alloc_adapter(struct pt1 *pt1, struct dvb_frontend *fe)
+{
+	struct pt1_adapter *adap;
+	void *buf;
+	struct dvb_adapter *dvb_adap;
+	struct dvb_demux *demux;
+	struct dmxdev *dmxdev;
+	int ret;
+
+	adap = kzalloc(sizeof(struct pt1_adapter), GFP_KERNEL);
+	if (!adap) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	adap->pt1 = pt1;
+
+	adap->orig_set_voltage = fe->ops.set_voltage;
+	fe->ops.set_voltage = pt1_set_voltage;
+
+	buf = (u8 *)__get_free_page(GFP_KERNEL);
+	if (!buf) {
+		ret = -ENOMEM;
+		goto err_kfree;
+	}
+
+	adap->buf = buf;
+	adap->upacket_count = 0;
+	adap->packet_count = 0;
+
+	dvb_adap = &adap->adap;
+	dvb_adap->priv = adap;
+	ret = dvb_register_adapter(dvb_adap, DRIVER_NAME, THIS_MODULE,
+				   &pt1->pdev->dev, adapter_nr);
+	if (ret < 0)
+		goto err_free_page;
+
+	demux = &adap->demux;
+	demux->dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING;
+	demux->priv = adap;
+	demux->feednum = 256;
+	demux->filternum = 256;
+	demux->start_feed = pt1_start_feed;
+	demux->stop_feed = pt1_stop_feed;
+	demux->write_to_decoder = NULL;
+	ret = dvb_dmx_init(demux);
+	if (ret < 0)
+		goto err_unregister_adapter;
+
+	dmxdev = &adap->dmxdev;
+	dmxdev->filternum = 256;
+	dmxdev->demux = &demux->dmx;
+	dmxdev->capabilities = 0;
+	ret = dvb_dmxdev_init(dmxdev, dvb_adap);
+	if (ret < 0)
+		goto err_dmx_release;
+
+	dvb_net_init(dvb_adap, &adap->net, &demux->dmx);
+
+	ret = dvb_register_frontend(dvb_adap, fe);
+	if (ret < 0)
+		goto err_net_release;
+	adap->fe = fe;
+
+	return adap;
+
+err_net_release:
+	dvb_net_release(&adap->net);
+	adap->demux.dmx.close(&adap->demux.dmx);
+	dvb_dmxdev_release(&adap->dmxdev);
+err_dmx_release:
+	dvb_dmx_release(demux);
+err_unregister_adapter:
+	dvb_unregister_adapter(dvb_adap);
+err_free_page:
+	free_page((unsigned long)buf);
+err_kfree:
+	kfree(adap);
+err:
+	return ERR_PTR(ret);
+}
+
+static void pt1_cleanup_adapters(struct pt1 *pt1)
+{
+	int i;
+	for (i = 0; i < PT1_NR_ADAPS; i++)
+		pt1_free_adapter(pt1->adaps[i]);
+}
+
+struct pt1_config {
+	struct va1j5jf8007s_config va1j5jf8007s_config;
+	struct va1j5jf8007t_config va1j5jf8007t_config;
+};
+
+static const struct pt1_config pt1_configs[2] = {
+	{
+		{ .demod_address = 0x1b },
+		{ .demod_address = 0x1a },
+	}, {
+		{ .demod_address = 0x19 },
+		{ .demod_address = 0x18 },
+	},
+};
+
+static int pt1_init_adapters(struct pt1 *pt1)
+{
+	int i, j;
+	struct i2c_adapter *i2c_adap;
+	const struct pt1_config *config;
+	struct dvb_frontend *fe[4];
+	struct pt1_adapter *adap;
+	int ret;
+
+	i = 0;
+	j = 0;
+
+	i2c_adap = &pt1->i2c_adap;
+	do {
+		config = &pt1_configs[i / 2];
+
+		fe[i] = va1j5jf8007s_attach(&config->va1j5jf8007s_config,
+					    i2c_adap);
+		if (!fe[i]) {
+			ret = -ENODEV; /* This does not sound nice... */
+			goto err;
+		}
+		i++;
+
+		fe[i] = va1j5jf8007t_attach(&config->va1j5jf8007t_config,
+					    i2c_adap);
+		if (!fe[i]) {
+			ret = -ENODEV;
+			goto err;
+		}
+		i++;
+
+		ret = va1j5jf8007s_prepare(fe[i - 2]);
+		if (ret < 0)
+			goto err;
+
+		ret = va1j5jf8007t_prepare(fe[i - 1]);
+		if (ret < 0)
+			goto err;
+
+	} while (i < 4);
+
+	do {
+		adap = pt1_alloc_adapter(pt1, fe[j]);
+		if (IS_ERR(adap))
+			goto err;
+		adap->index = j;
+		pt1->adaps[j] = adap;
+	} while (++j < 4);
+
+	return 0;
+
+err:
+	while (i-- > j)
+		fe[i]->ops.release(fe[i]);
+
+	while (j--)
+		pt1_free_adapter(pt1->adaps[j]);
+
+	return ret;
+}
+
+static void pt1_i2c_emit(struct pt1 *pt1, int addr, int busy, int read_enable,
+			 int clock, int data, int next_addr)
+{
+	pt1_write_reg(pt1, 4, addr << 18 | busy << 13 | read_enable << 12 |
+		      !clock << 11 | !data << 10 | next_addr);
+}
+
+static void pt1_i2c_write_bit(struct pt1 *pt1, int addr, int *addrp, int data)
+{
+	pt1_i2c_emit(pt1, addr,     1, 0, 0, data, addr + 1);
+	pt1_i2c_emit(pt1, addr + 1, 1, 0, 1, data, addr + 2);
+	pt1_i2c_emit(pt1, addr + 2, 1, 0, 0, data, addr + 3);
+	*addrp = addr + 3;
+}
+
+static void pt1_i2c_read_bit(struct pt1 *pt1, int addr, int *addrp)
+{
+	pt1_i2c_emit(pt1, addr,     1, 0, 0, 1, addr + 1);
+	pt1_i2c_emit(pt1, addr + 1, 1, 0, 1, 1, addr + 2);
+	pt1_i2c_emit(pt1, addr + 2, 1, 1, 1, 1, addr + 3);
+	pt1_i2c_emit(pt1, addr + 3, 1, 0, 0, 1, addr + 4);
+	*addrp = addr + 4;
+}
+
+static void pt1_i2c_write_byte(struct pt1 *pt1, int addr, int *addrp, int data)
+{
+	int i;
+	for (i = 0; i < 8; i++)
+		pt1_i2c_write_bit(pt1, addr, &addr, data >> (7 - i) & 1);
+	pt1_i2c_write_bit(pt1, addr, &addr, 1);
+	*addrp = addr;
+}
+
+static void pt1_i2c_read_byte(struct pt1 *pt1, int addr, int *addrp, int last)
+{
+	int i;
+	for (i = 0; i < 8; i++)
+		pt1_i2c_read_bit(pt1, addr, &addr);
+	pt1_i2c_write_bit(pt1, addr, &addr, last);
+	*addrp = addr;
+}
+
+static void pt1_i2c_prepare(struct pt1 *pt1, int addr, int *addrp)
+{
+	pt1_i2c_emit(pt1, addr,     1, 0, 1, 1, addr + 1);
+	pt1_i2c_emit(pt1, addr + 1, 1, 0, 1, 0, addr + 2);
+	pt1_i2c_emit(pt1, addr + 2, 1, 0, 0, 0, addr + 3);
+	*addrp = addr + 3;
+}
+
+static void
+pt1_i2c_write_msg(struct pt1 *pt1, int addr, int *addrp, struct i2c_msg *msg)
+{
+	int i;
+	pt1_i2c_prepare(pt1, addr, &addr);
+	pt1_i2c_write_byte(pt1, addr, &addr, msg->addr << 1);
+	for (i = 0; i < msg->len; i++)
+		pt1_i2c_write_byte(pt1, addr, &addr, msg->buf[i]);
+	*addrp = addr;
+}
+
+static void
+pt1_i2c_read_msg(struct pt1 *pt1, int addr, int *addrp, struct i2c_msg *msg)
+{
+	int i;
+	pt1_i2c_prepare(pt1, addr, &addr);
+	pt1_i2c_write_byte(pt1, addr, &addr, msg->addr << 1 | 1);
+	for (i = 0; i < msg->len; i++)
+		pt1_i2c_read_byte(pt1, addr, &addr, i == msg->len - 1);
+	*addrp = addr;
+}
+
+static int pt1_i2c_end(struct pt1 *pt1, int addr)
+{
+	pt1_i2c_emit(pt1, addr,     1, 0, 0, 0, addr + 1);
+	pt1_i2c_emit(pt1, addr + 1, 1, 0, 1, 0, addr + 2);
+	pt1_i2c_emit(pt1, addr + 2, 1, 0, 1, 1, 0);
+
+	pt1_write_reg(pt1, 0, 0x00000004);
+	do {
+		if (signal_pending(current))
+			return -EINTR;
+		schedule_timeout_interruptible((HZ + 999) / 1000);
+	} while (pt1_read_reg(pt1, 0) & 0x00000080);
+	return 0;
+}
+
+static void pt1_i2c_begin(struct pt1 *pt1, int *addrp)
+{
+	int addr;
+	addr = 0;
+
+	pt1_i2c_emit(pt1, addr,     0, 0, 1, 1, addr /* itself */);
+	addr = addr + 1;
+
+	if (!pt1->i2c_running) {
+		pt1_i2c_emit(pt1, addr,     1, 0, 1, 1, addr + 1);
+		pt1_i2c_emit(pt1, addr + 1, 1, 0, 1, 0, addr + 2);
+		addr = addr + 2;
+		pt1->i2c_running = 1;
+	}
+	*addrp = addr;
+}
+
+static int pt1_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+	struct pt1 *pt1;
+	int i;
+	struct i2c_msg *msg, *next_msg;
+	int addr, ret;
+	u16 len;
+	u32 word;
+
+	pt1 = i2c_get_adapdata(adap);
+
+	for (i = 0; i < num; i++) {
+		msg = &msgs[i];
+		if (msg->flags & I2C_M_RD)
+			return -ENOTSUPP;
+
+		if (i + 1 < num)
+			next_msg = &msgs[i + 1];
+		else
+			next_msg = NULL;
+
+		if (next_msg && next_msg->flags & I2C_M_RD) {
+			i++;
+
+			len = next_msg->len;
+			if (len > 4)
+				return -ENOTSUPP;
+
+			pt1_i2c_begin(pt1, &addr);
+			pt1_i2c_write_msg(pt1, addr, &addr, msg);
+			pt1_i2c_read_msg(pt1, addr, &addr, next_msg);
+			ret = pt1_i2c_end(pt1, addr);
+			if (ret < 0)
+				return ret;
+
+			word = pt1_read_reg(pt1, 2);
+			while (len--) {
+				next_msg->buf[len] = word;
+				word >>= 8;
+			}
+		} else {
+			pt1_i2c_begin(pt1, &addr);
+			pt1_i2c_write_msg(pt1, addr, &addr, msg);
+			ret = pt1_i2c_end(pt1, addr);
+			if (ret < 0)
+				return ret;
+		}
+	}
+
+	return num;
+}
+
+static u32 pt1_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C;
+}
+
+static const struct i2c_algorithm pt1_i2c_algo = {
+	.master_xfer = pt1_i2c_xfer,
+	.functionality = pt1_i2c_func,
+};
+
+static void pt1_i2c_wait(struct pt1 *pt1)
+{
+	int i;
+	for (i = 0; i < 128; i++)
+		pt1_i2c_emit(pt1, 0, 0, 0, 1, 1, 0);
+}
+
+static void pt1_i2c_init(struct pt1 *pt1)
+{
+	int i;
+	for (i = 0; i < 1024; i++)
+		pt1_i2c_emit(pt1, i, 0, 0, 1, 1, 0);
+}
+
+static void __devexit pt1_remove(struct pci_dev *pdev)
+{
+	struct pt1 *pt1;
+	void __iomem *regs;
+
+	pt1 = pci_get_drvdata(pdev);
+	regs = pt1->regs;
+
+	kthread_stop(pt1->kthread);
+	pt1_cleanup_tables(pt1);
+	pt1_cleanup_adapters(pt1);
+	pt1_disable_ram(pt1);
+	pt1_set_power(pt1, 0, 0, 1);
+	i2c_del_adapter(&pt1->i2c_adap);
+	pci_set_drvdata(pdev, NULL);
+	kfree(pt1);
+	pci_iounmap(pdev, regs);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+}
+
+static int __devinit
+pt1_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	int ret;
+	void __iomem *regs;
+	struct pt1 *pt1;
+	struct i2c_adapter *i2c_adap;
+	struct task_struct *kthread;
+
+	ret = pci_enable_device(pdev);
+	if (ret < 0)
+		goto err;
+
+	ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+	if (ret < 0)
+		goto err_pci_disable_device;
+
+	pci_set_master(pdev);
+
+	ret = pci_request_regions(pdev, DRIVER_NAME);
+	if (ret < 0)
+		goto err_pci_disable_device;
+
+	regs = pci_iomap(pdev, 0, 0);
+	if (!regs) {
+		ret = -EIO;
+		goto err_pci_release_regions;
+	}
+
+	pt1 = kzalloc(sizeof(struct pt1), GFP_KERNEL);
+	if (!pt1) {
+		ret = -ENOMEM;
+		goto err_pci_iounmap;
+	}
+
+	pt1->pdev = pdev;
+	pt1->regs = regs;
+	pci_set_drvdata(pdev, pt1);
+
+	i2c_adap = &pt1->i2c_adap;
+	i2c_adap->class = I2C_CLASS_TV_DIGITAL;
+	i2c_adap->algo = &pt1_i2c_algo;
+	i2c_adap->algo_data = NULL;
+	i2c_adap->dev.parent = &pdev->dev;
+	i2c_set_adapdata(i2c_adap, pt1);
+	ret = i2c_add_adapter(i2c_adap);
+	if (ret < 0)
+		goto err_kfree;
+
+	pt1_set_power(pt1, 0, 0, 1);
+
+	pt1_i2c_init(pt1);
+	pt1_i2c_wait(pt1);
+
+	ret = pt1_sync(pt1);
+	if (ret < 0)
+		goto err_i2c_del_adapter;
+
+	pt1_identify(pt1);
+
+	ret = pt1_unlock(pt1);
+	if (ret < 0)
+		goto err_i2c_del_adapter;
+
+	ret = pt1_reset_pci(pt1);
+	if (ret < 0)
+		goto err_i2c_del_adapter;
+
+	ret = pt1_reset_ram(pt1);
+	if (ret < 0)
+		goto err_i2c_del_adapter;
+
+	ret = pt1_enable_ram(pt1);
+	if (ret < 0)
+		goto err_i2c_del_adapter;
+
+	pt1_init_streams(pt1);
+
+	pt1_set_power(pt1, 1, 0, 1);
+	schedule_timeout_uninterruptible((HZ + 49) / 50);
+
+	pt1_set_power(pt1, 1, 0, 0);
+	schedule_timeout_uninterruptible((HZ + 999) / 1000);
+
+	ret = pt1_init_adapters(pt1);
+	if (ret < 0)
+		goto err_pt1_disable_ram;
+
+	ret = pt1_init_tables(pt1);
+	if (ret < 0)
+		goto err_pt1_cleanup_adapters;
+
+	kthread = kthread_run(pt1_thread, pt1, "pt1");
+	if (IS_ERR(kthread)) {
+		ret = PTR_ERR(kthread);
+		goto err_pt1_cleanup_tables;
+	}
+
+	pt1->kthread = kthread;
+	return 0;
+
+err_pt1_cleanup_tables:
+	pt1_cleanup_tables(pt1);
+err_pt1_cleanup_adapters:
+	pt1_cleanup_adapters(pt1);
+err_pt1_disable_ram:
+	pt1_disable_ram(pt1);
+	pt1_set_power(pt1, 0, 0, 1);
+err_i2c_del_adapter:
+	i2c_del_adapter(i2c_adap);
+err_kfree:
+	pci_set_drvdata(pdev, NULL);
+	kfree(pt1);
+err_pci_iounmap:
+	pci_iounmap(pdev, regs);
+err_pci_release_regions:
+	pci_release_regions(pdev);
+err_pci_disable_device:
+	pci_disable_device(pdev);
+err:
+	return ret;
+
+}
+
+static struct pci_device_id pt1_id_table[] = {
+	{ PCI_DEVICE(0x10ee, 0x211a) },
+	{ },
+};
+MODULE_DEVICE_TABLE(pci, pt1_id_table);
+
+static struct pci_driver pt1_driver = {
+	.name		= DRIVER_NAME,
+	.probe		= pt1_probe,
+	.remove		= __devexit_p(pt1_remove),
+	.id_table	= pt1_id_table,
+};
+
+
+static int __init pt1_init(void)
+{
+	return pci_register_driver(&pt1_driver);
+}
+
+
+static void __exit pt1_cleanup(void)
+{
+	pci_unregister_driver(&pt1_driver);
+}
+
+module_init(pt1_init);
+module_exit(pt1_cleanup);
+
+MODULE_AUTHOR("Takahito HIRANO <hiranotaka@zng.info>");
+MODULE_DESCRIPTION("Earthsoft PT1 Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/pt1/va1j5jf8007s.c b/drivers/media/dvb/pt1/va1j5jf8007s.c
new file mode 100644
index 00000000000..2db940f8635
--- /dev/null
+++ b/drivers/media/dvb/pt1/va1j5jf8007s.c
@@ -0,0 +1,658 @@
+/*
+ * ISDB-S driver for VA1J5JF8007
+ *
+ * Copyright (C) 2009 HIRANO Takahito <hiranotaka@zng.info>
+ *
+ * based on pt1dvr - http://pt1dvr.sourceforge.jp/
+ * 	by Tomoaki Ishikawa <tomy@users.sourceforge.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include "dvb_frontend.h"
+#include "va1j5jf8007s.h"
+
+enum va1j5jf8007s_tune_state {
+	VA1J5JF8007S_IDLE,
+	VA1J5JF8007S_SET_FREQUENCY_1,
+	VA1J5JF8007S_SET_FREQUENCY_2,
+	VA1J5JF8007S_SET_FREQUENCY_3,
+	VA1J5JF8007S_CHECK_FREQUENCY,
+	VA1J5JF8007S_SET_MODULATION,
+	VA1J5JF8007S_CHECK_MODULATION,
+	VA1J5JF8007S_SET_TS_ID,
+	VA1J5JF8007S_CHECK_TS_ID,
+	VA1J5JF8007S_TRACK,
+};
+
+struct va1j5jf8007s_state {
+	const struct va1j5jf8007s_config *config;
+	struct i2c_adapter *adap;
+	struct dvb_frontend fe;
+	enum va1j5jf8007s_tune_state tune_state;
+};
+
+static int va1j5jf8007s_get_frontend_algo(struct dvb_frontend *fe)
+{
+	return DVBFE_ALGO_HW;
+}
+
+static int
+va1j5jf8007s_read_status(struct dvb_frontend *fe, fe_status_t *status)
+{
+	struct va1j5jf8007s_state *state;
+
+	state = fe->demodulator_priv;
+
+	switch (state->tune_state) {
+	case VA1J5JF8007S_IDLE:
+	case VA1J5JF8007S_SET_FREQUENCY_1:
+	case VA1J5JF8007S_SET_FREQUENCY_2:
+	case VA1J5JF8007S_SET_FREQUENCY_3:
+	case VA1J5JF8007S_CHECK_FREQUENCY:
+		*status = 0;
+		return 0;
+
+
+	case VA1J5JF8007S_SET_MODULATION:
+	case VA1J5JF8007S_CHECK_MODULATION:
+		*status |= FE_HAS_SIGNAL;
+		return 0;
+
+	case VA1J5JF8007S_SET_TS_ID:
+	case VA1J5JF8007S_CHECK_TS_ID:
+		*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER;
+		return 0;
+
+	case VA1J5JF8007S_TRACK:
+		*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_LOCK;
+		return 0;
+	}
+
+	BUG();
+}
+
+struct va1j5jf8007s_cb_map {
+	u32 frequency;
+	u8 cb;
+};
+
+static const struct va1j5jf8007s_cb_map va1j5jf8007s_cb_maps[] = {
+	{  986000, 0xb2 },
+	{ 1072000, 0xd2 },
+	{ 1154000, 0xe2 },
+	{ 1291000, 0x20 },
+	{ 1447000, 0x40 },
+	{ 1615000, 0x60 },
+	{ 1791000, 0x80 },
+	{ 1972000, 0xa0 },
+};
+
+static u8 va1j5jf8007s_lookup_cb(u32 frequency)
+{
+	int i;
+	const struct va1j5jf8007s_cb_map *map;
+
+	for (i = 0; i < ARRAY_SIZE(va1j5jf8007s_cb_maps); i++) {
+		map = &va1j5jf8007s_cb_maps[i];
+		if (frequency < map->frequency)
+			return map->cb;
+	}
+	return 0xc0;
+}
+
+static int va1j5jf8007s_set_frequency_1(struct va1j5jf8007s_state *state)
+{
+	u32 frequency;
+	u16 word;
+	u8 buf[6];
+	struct i2c_msg msg;
+
+	frequency = state->fe.dtv_property_cache.frequency;
+
+	word = (frequency + 500) / 1000;
+	if (frequency < 1072000)
+		word = (word << 1 & ~0x1f) | (word & 0x0f);
+
+	buf[0] = 0xfe;
+	buf[1] = 0xc0;
+	buf[2] = 0x40 | word >> 8;
+	buf[3] = word;
+	buf[4] = 0xe0;
+	buf[5] = va1j5jf8007s_lookup_cb(frequency);
+
+	msg.addr = state->config->demod_address;
+	msg.flags = 0;
+	msg.len = sizeof(buf);
+	msg.buf = buf;
+
+	if (i2c_transfer(state->adap, &msg, 1) != 1)
+		return -EREMOTEIO;
+
+	return 0;
+}
+
+static int va1j5jf8007s_set_frequency_2(struct va1j5jf8007s_state *state)
+{
+	u8 buf[3];
+	struct i2c_msg msg;
+
+	buf[0] = 0xfe;
+	buf[1] = 0xc0;
+	buf[2] = 0xe4;
+
+	msg.addr = state->config->demod_address;
+	msg.flags = 0;
+	msg.len = sizeof(buf);
+	msg.buf = buf;
+
+	if (i2c_transfer(state->adap, &msg, 1) != 1)
+		return -EREMOTEIO;
+
+	return 0;
+}
+
+static int va1j5jf8007s_set_frequency_3(struct va1j5jf8007s_state *state)
+{
+	u32 frequency;
+	u8 buf[4];
+	struct i2c_msg msg;
+
+	frequency = state->fe.dtv_property_cache.frequency;
+
+	buf[0] = 0xfe;
+	buf[1] = 0xc0;
+	buf[2] = 0xf4;
+	buf[3] = va1j5jf8007s_lookup_cb(frequency) | 0x4;
+
+	msg.addr = state->config->demod_address;
+	msg.flags = 0;
+	msg.len = sizeof(buf);
+	msg.buf = buf;
+
+	if (i2c_transfer(state->adap, &msg, 1) != 1)
+		return -EREMOTEIO;
+
+	return 0;
+}
+
+static int
+va1j5jf8007s_check_frequency(struct va1j5jf8007s_state *state, int *lock)
+{
+	u8 addr;
+	u8 write_buf[2], read_buf[1];
+	struct i2c_msg msgs[2];
+
+	addr = state->config->demod_address;
+
+	write_buf[0] = 0xfe;
+	write_buf[1] = 0xc1;
+
+	msgs[0].addr = addr;
+	msgs[0].flags = 0;
+	msgs[0].len = sizeof(write_buf);
+	msgs[0].buf = write_buf;
+
+	msgs[1].addr = addr;
+	msgs[1].flags = I2C_M_RD;
+	msgs[1].len = sizeof(read_buf);
+	msgs[1].buf = read_buf;
+
+	if (i2c_transfer(state->adap, msgs, 2) != 2)
+		return -EREMOTEIO;
+
+	*lock = read_buf[0] & 0x40;
+	return 0;
+}
+
+static int va1j5jf8007s_set_modulation(struct va1j5jf8007s_state *state)
+{
+	u8 buf[2];
+	struct i2c_msg msg;
+
+	buf[0] = 0x03;
+	buf[1] = 0x01;
+
+	msg.addr = state->config->demod_address;
+	msg.flags = 0;
+	msg.len = sizeof(buf);
+	msg.buf = buf;
+
+	if (i2c_transfer(state->adap, &msg, 1) != 1)
+		return -EREMOTEIO;
+
+	return 0;
+}
+
+static int
+va1j5jf8007s_check_modulation(struct va1j5jf8007s_state *state, int *lock)
+{
+	u8 addr;
+	u8 write_buf[1], read_buf[1];
+	struct i2c_msg msgs[2];
+
+	addr = state->config->demod_address;
+
+	write_buf[0] = 0xc3;
+
+	msgs[0].addr = addr;
+	msgs[0].flags = 0;
+	msgs[0].len = sizeof(write_buf);
+	msgs[0].buf = write_buf;
+
+	msgs[1].addr = addr;
+	msgs[1].flags = I2C_M_RD;
+	msgs[1].len = sizeof(read_buf);
+	msgs[1].buf = read_buf;
+
+	if (i2c_transfer(state->adap, msgs, 2) != 2)
+		return -EREMOTEIO;
+
+	*lock = !(read_buf[0] & 0x10);
+	return 0;
+}
+
+static int
+va1j5jf8007s_set_ts_id(struct va1j5jf8007s_state *state)
+{
+	u32 ts_id;
+	u8 buf[3];
+	struct i2c_msg msg;
+
+	ts_id = state->fe.dtv_property_cache.isdbs_ts_id;
+	if (!ts_id)
+		return 0;
+
+	buf[0] = 0x8f;
+	buf[1] = ts_id >> 8;
+	buf[2] = ts_id;
+
+	msg.addr = state->config->demod_address;
+	msg.flags = 0;
+	msg.len = sizeof(buf);
+	msg.buf = buf;
+
+	if (i2c_transfer(state->adap, &msg, 1) != 1)
+		return -EREMOTEIO;
+
+	return 0;
+}
+
+static int
+va1j5jf8007s_check_ts_id(struct va1j5jf8007s_state *state, int *lock)
+{
+	u8 addr;
+	u8 write_buf[1], read_buf[2];
+	struct i2c_msg msgs[2];
+	u32 ts_id;
+
+	ts_id = state->fe.dtv_property_cache.isdbs_ts_id;
+	if (!ts_id) {
+		*lock = 1;
+		return 0;
+	}
+
+	addr = state->config->demod_address;
+
+	write_buf[0] = 0xe6;
+
+	msgs[0].addr = addr;
+	msgs[0].flags = 0;
+	msgs[0].len = sizeof(write_buf);
+	msgs[0].buf = write_buf;
+
+	msgs[1].addr = addr;
+	msgs[1].flags = I2C_M_RD;
+	msgs[1].len = sizeof(read_buf);
+	msgs[1].buf = read_buf;
+
+	if (i2c_transfer(state->adap, msgs, 2) != 2)
+		return -EREMOTEIO;
+
+	*lock = (read_buf[0] << 8 | read_buf[1]) == ts_id;
+	return 0;
+}
+
+static int
+va1j5jf8007s_tune(struct dvb_frontend *fe,
+		  struct dvb_frontend_parameters *params,
+		  unsigned int mode_flags,  unsigned int *delay,
+		  fe_status_t *status)
+{
+	struct va1j5jf8007s_state *state;
+	int ret;
+	int lock;
+
+	state = fe->demodulator_priv;
+
+	if (params != NULL)
+		state->tune_state = VA1J5JF8007S_SET_FREQUENCY_1;
+
+	switch (state->tune_state) {
+	case VA1J5JF8007S_IDLE:
+		*delay = 3 * HZ;
+		*status = 0;
+		return 0;
+
+	case VA1J5JF8007S_SET_FREQUENCY_1:
+		ret = va1j5jf8007s_set_frequency_1(state);
+		if (ret < 0)
+			return ret;
+
+		state->tune_state = VA1J5JF8007S_SET_FREQUENCY_2;
+		*delay = 0;
+		*status = 0;
+		return 0;
+
+	case VA1J5JF8007S_SET_FREQUENCY_2:
+		ret = va1j5jf8007s_set_frequency_2(state);
+		if (ret < 0)
+			return ret;
+
+		state->tune_state = VA1J5JF8007S_SET_FREQUENCY_3;
+		*delay = (HZ + 99) / 100;
+		*status = 0;
+		return 0;
+
+	case VA1J5JF8007S_SET_FREQUENCY_3:
+		ret = va1j5jf8007s_set_frequency_3(state);
+		if (ret < 0)
+			return ret;
+
+		state->tune_state = VA1J5JF8007S_CHECK_FREQUENCY;
+		*delay = 0;
+		*status = 0;
+		return 0;
+
+	case VA1J5JF8007S_CHECK_FREQUENCY:
+		ret = va1j5jf8007s_check_frequency(state, &lock);
+		if (ret < 0)
+			return ret;
+
+		if (!lock)  {
+			*delay = (HZ + 999) / 1000;
+			*status = 0;
+			return 0;
+		}
+
+		state->tune_state = VA1J5JF8007S_SET_MODULATION;
+		*delay = 0;
+		*status = FE_HAS_SIGNAL;
+		return 0;
+
+	case VA1J5JF8007S_SET_MODULATION:
+		ret = va1j5jf8007s_set_modulation(state);
+		if (ret < 0)
+			return ret;
+
+		state->tune_state = VA1J5JF8007S_CHECK_MODULATION;
+		*delay = 0;
+		*status = FE_HAS_SIGNAL;
+		return 0;
+
+	case VA1J5JF8007S_CHECK_MODULATION:
+		ret = va1j5jf8007s_check_modulation(state, &lock);
+		if (ret < 0)
+			return ret;
+
+		if (!lock)  {
+			*delay = (HZ + 49) / 50;
+			*status = FE_HAS_SIGNAL;
+			return 0;
+		}
+
+		state->tune_state = VA1J5JF8007S_SET_TS_ID;
+		*delay = 0;
+		*status = FE_HAS_SIGNAL | FE_HAS_CARRIER;
+		return 0;
+
+	case VA1J5JF8007S_SET_TS_ID:
+		ret = va1j5jf8007s_set_ts_id(state);
+		if (ret < 0)
+			return ret;
+
+		state->tune_state = VA1J5JF8007S_CHECK_TS_ID;
+		return 0;
+
+	case VA1J5JF8007S_CHECK_TS_ID:
+		ret = va1j5jf8007s_check_ts_id(state, &lock);
+		if (ret < 0)
+			return ret;
+
+		if (!lock)  {
+			*delay = (HZ + 99) / 100;
+			*status = FE_HAS_SIGNAL | FE_HAS_CARRIER;
+			return 0;
+		}
+
+		state->tune_state = VA1J5JF8007S_TRACK;
+		/* fall through */
+
+	case VA1J5JF8007S_TRACK:
+		*delay = 3 * HZ;
+		*status = FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_LOCK;
+		return 0;
+	}
+
+	BUG();
+}
+
+static int va1j5jf8007s_init_frequency(struct va1j5jf8007s_state *state)
+{
+	u8 buf[4];
+	struct i2c_msg msg;
+
+	buf[0] = 0xfe;
+	buf[1] = 0xc0;
+	buf[2] = 0xf0;
+	buf[3] = 0x04;
+
+	msg.addr = state->config->demod_address;
+	msg.flags = 0;
+	msg.len = sizeof(buf);
+	msg.buf = buf;
+
+	if (i2c_transfer(state->adap, &msg, 1) != 1)
+		return -EREMOTEIO;
+
+	return 0;
+}
+
+static int va1j5jf8007s_set_sleep(struct va1j5jf8007s_state *state, int sleep)
+{
+	u8 buf[2];
+	struct i2c_msg msg;
+
+	buf[0] = 0x17;
+	buf[1] = sleep ? 0x01 : 0x00;
+
+	msg.addr = state->config->demod_address;
+	msg.flags = 0;
+	msg.len = sizeof(buf);
+	msg.buf = buf;
+
+	if (i2c_transfer(state->adap, &msg, 1) != 1)
+		return -EREMOTEIO;
+
+	return 0;
+}
+
+static int va1j5jf8007s_sleep(struct dvb_frontend *fe)
+{
+	struct va1j5jf8007s_state *state;
+	int ret;
+
+	state = fe->demodulator_priv;
+
+	ret = va1j5jf8007s_init_frequency(state);
+	if (ret < 0)
+		return ret;
+
+	return va1j5jf8007s_set_sleep(state, 1);
+}
+
+static int va1j5jf8007s_init(struct dvb_frontend *fe)
+{
+	struct va1j5jf8007s_state *state;
+
+	state = fe->demodulator_priv;
+	state->tune_state = VA1J5JF8007S_IDLE;
+
+	return va1j5jf8007s_set_sleep(state, 0);
+}
+
+static void va1j5jf8007s_release(struct dvb_frontend *fe)
+{
+	struct va1j5jf8007s_state *state;
+	state = fe->demodulator_priv;
+	kfree(state);
+}
+
+static struct dvb_frontend_ops va1j5jf8007s_ops = {
+	.info = {
+		.name = "VA1J5JF8007 ISDB-S",
+		.type = FE_QPSK,
+		.frequency_min = 950000,
+		.frequency_max = 2150000,
+		.frequency_stepsize = 1000,
+		.caps = FE_CAN_INVERSION_AUTO | FE_CAN_FEC_AUTO |
+			FE_CAN_QAM_AUTO | FE_CAN_TRANSMISSION_MODE_AUTO |
+			FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_HIERARCHY_AUTO,
+	},
+
+	.get_frontend_algo = va1j5jf8007s_get_frontend_algo,
+	.read_status = va1j5jf8007s_read_status,
+	.tune = va1j5jf8007s_tune,
+	.sleep = va1j5jf8007s_sleep,
+	.init = va1j5jf8007s_init,
+	.release = va1j5jf8007s_release,
+};
+
+static int va1j5jf8007s_prepare_1(struct va1j5jf8007s_state *state)
+{
+	u8 addr;
+	u8 write_buf[1], read_buf[1];
+	struct i2c_msg msgs[2];
+
+	addr = state->config->demod_address;
+
+	write_buf[0] = 0x07;
+
+	msgs[0].addr = addr;
+	msgs[0].flags = 0;
+	msgs[0].len = sizeof(write_buf);
+	msgs[0].buf = write_buf;
+
+	msgs[1].addr = addr;
+	msgs[1].flags = I2C_M_RD;
+	msgs[1].len = sizeof(read_buf);
+	msgs[1].buf = read_buf;
+
+	if (i2c_transfer(state->adap, msgs, 2) != 2)
+		return -EREMOTEIO;
+
+	if (read_buf[0] != 0x41)
+		return -EIO;
+
+	return 0;
+}
+
+static const u8 va1j5jf8007s_prepare_bufs[][2] = {
+	{0x04, 0x02}, {0x0d, 0x55}, {0x11, 0x40}, {0x13, 0x80}, {0x17, 0x01},
+	{0x1c, 0x0a}, {0x1d, 0xaa}, {0x1e, 0x20}, {0x1f, 0x88}, {0x51, 0xb0},
+	{0x52, 0x89}, {0x53, 0xb3}, {0x5a, 0x2d}, {0x5b, 0xd3}, {0x85, 0x69},
+	{0x87, 0x04}, {0x8e, 0x02}, {0xa3, 0xf7}, {0xa5, 0xc0},
+};
+
+static int va1j5jf8007s_prepare_2(struct va1j5jf8007s_state *state)
+{
+	u8 addr;
+	u8 buf[2];
+	struct i2c_msg msg;
+	int i;
+
+	addr = state->config->demod_address;
+
+	msg.addr = addr;
+	msg.flags = 0;
+	msg.len = 2;
+	msg.buf = buf;
+	for (i = 0; i < ARRAY_SIZE(va1j5jf8007s_prepare_bufs); i++) {
+		memcpy(buf, va1j5jf8007s_prepare_bufs[i], sizeof(buf));
+		if (i2c_transfer(state->adap, &msg, 1) != 1)
+			return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+/* must be called after va1j5jf8007t_attach */
+int va1j5jf8007s_prepare(struct dvb_frontend *fe)
+{
+	struct va1j5jf8007s_state *state;
+	int ret;
+
+	state = fe->demodulator_priv;
+
+	ret = va1j5jf8007s_prepare_1(state);
+	if (ret < 0)
+		return ret;
+
+	ret = va1j5jf8007s_prepare_2(state);
+	if (ret < 0)
+		return ret;
+
+	return va1j5jf8007s_init_frequency(state);
+}
+
+struct dvb_frontend *
+va1j5jf8007s_attach(const struct va1j5jf8007s_config *config,
+		    struct i2c_adapter *adap)
+{
+	struct va1j5jf8007s_state *state;
+	struct dvb_frontend *fe;
+	u8 buf[2];
+	struct i2c_msg msg;
+
+	state = kzalloc(sizeof(struct va1j5jf8007s_state), GFP_KERNEL);
+	if (!state)
+		return NULL;
+
+	state->config = config;
+	state->adap = adap;
+
+	fe = &state->fe;
+	memcpy(&fe->ops, &va1j5jf8007s_ops, sizeof(struct dvb_frontend_ops));
+	fe->demodulator_priv = state;
+
+	buf[0] = 0x01;
+	buf[1] = 0x80;
+
+	msg.addr = state->config->demod_address;
+	msg.flags = 0;
+	msg.len = sizeof(buf);
+	msg.buf = buf;
+
+	if (i2c_transfer(state->adap, &msg, 1) != 1) {
+		kfree(state);
+		return NULL;
+	}
+
+	return fe;
+}
diff --git a/drivers/media/dvb/pt1/va1j5jf8007s.h b/drivers/media/dvb/pt1/va1j5jf8007s.h
new file mode 100644
index 00000000000..aa228a81635
--- /dev/null
+++ b/drivers/media/dvb/pt1/va1j5jf8007s.h
@@ -0,0 +1,40 @@
+/*
+ * ISDB-S driver for VA1J5JF8007
+ *
+ * Copyright (C) 2009 HIRANO Takahito <hiranotaka@zng.info>
+ *
+ * based on pt1dvr - http://pt1dvr.sourceforge.jp/
+ * 	by Tomoaki Ishikawa <tomy@users.sourceforge.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef VA1J5JF8007S_H
+#define VA1J5JF8007S_H
+
+struct va1j5jf8007s_config {
+	u8 demod_address;
+};
+
+struct i2c_adapter;
+
+struct dvb_frontend *
+va1j5jf8007s_attach(const struct va1j5jf8007s_config *config,
+		    struct i2c_adapter *adap);
+
+/* must be called after va1j5jf8007t_attach */
+int va1j5jf8007s_prepare(struct dvb_frontend *fe);
+
+#endif
diff --git a/drivers/media/dvb/pt1/va1j5jf8007t.c b/drivers/media/dvb/pt1/va1j5jf8007t.c
new file mode 100644
index 00000000000..71117f4ca7e
--- /dev/null
+++ b/drivers/media/dvb/pt1/va1j5jf8007t.c
@@ -0,0 +1,468 @@
+/*
+ * ISDB-T driver for VA1J5JF8007
+ *
+ * Copyright (C) 2009 HIRANO Takahito <hiranotaka@zng.info>
+ *
+ * based on pt1dvr - http://pt1dvr.sourceforge.jp/
+ * 	by Tomoaki Ishikawa <tomy@users.sourceforge.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include "dvb_frontend.h"
+#include "dvb_math.h"
+#include "va1j5jf8007t.h"
+
+enum va1j5jf8007t_tune_state {
+	VA1J5JF8007T_IDLE,
+	VA1J5JF8007T_SET_FREQUENCY,
+	VA1J5JF8007T_CHECK_FREQUENCY,
+	VA1J5JF8007T_SET_MODULATION,
+	VA1J5JF8007T_CHECK_MODULATION,
+	VA1J5JF8007T_TRACK,
+	VA1J5JF8007T_ABORT,
+};
+
+struct va1j5jf8007t_state {
+	const struct va1j5jf8007t_config *config;
+	struct i2c_adapter *adap;
+	struct dvb_frontend fe;
+	enum va1j5jf8007t_tune_state tune_state;
+};
+
+static int va1j5jf8007t_get_frontend_algo(struct dvb_frontend *fe)
+{
+	return DVBFE_ALGO_HW;
+}
+
+static int
+va1j5jf8007t_read_status(struct dvb_frontend *fe, fe_status_t *status)
+{
+	struct va1j5jf8007t_state *state;
+
+	state = fe->demodulator_priv;
+
+	switch (state->tune_state) {
+	case VA1J5JF8007T_IDLE:
+	case VA1J5JF8007T_SET_FREQUENCY:
+	case VA1J5JF8007T_CHECK_FREQUENCY:
+		*status = 0;
+		return 0;
+
+
+	case VA1J5JF8007T_SET_MODULATION:
+	case VA1J5JF8007T_CHECK_MODULATION:
+	case VA1J5JF8007T_ABORT:
+		*status |= FE_HAS_SIGNAL;
+		return 0;
+
+	case VA1J5JF8007T_TRACK:
+		*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_LOCK;
+		return 0;
+	}
+
+	BUG();
+}
+
+struct va1j5jf8007t_cb_map {
+	u32 frequency;
+	u8 cb;
+};
+
+static const struct va1j5jf8007t_cb_map va1j5jf8007t_cb_maps[] = {
+	{  90000000, 0x80 },
+	{ 140000000, 0x81 },
+	{ 170000000, 0xa1 },
+	{ 220000000, 0x62 },
+	{ 330000000, 0xa2 },
+	{ 402000000, 0xe2 },
+	{ 450000000, 0x64 },
+	{ 550000000, 0x84 },
+	{ 600000000, 0xa4 },
+	{ 700000000, 0xc4 },
+};
+
+static u8 va1j5jf8007t_lookup_cb(u32 frequency)
+{
+	int i;
+	const struct va1j5jf8007t_cb_map *map;
+
+	for (i = 0; i < ARRAY_SIZE(va1j5jf8007t_cb_maps); i++) {
+		map = &va1j5jf8007t_cb_maps[i];
+		if (frequency < map->frequency)
+			return map->cb;
+	}
+	return 0xe4;
+}
+
+static int va1j5jf8007t_set_frequency(struct va1j5jf8007t_state *state)
+{
+	u32 frequency;
+	u16 word;
+	u8 buf[6];
+	struct i2c_msg msg;
+
+	frequency = state->fe.dtv_property_cache.frequency;
+
+	word = (frequency + 71428) / 142857 + 399;
+	buf[0] = 0xfe;
+	buf[1] = 0xc2;
+	buf[2] = word >> 8;
+	buf[3] = word;
+	buf[4] = 0x80;
+	buf[5] = va1j5jf8007t_lookup_cb(frequency);
+
+	msg.addr = state->config->demod_address;
+	msg.flags = 0;
+	msg.len = sizeof(buf);
+	msg.buf = buf;
+
+	if (i2c_transfer(state->adap, &msg, 1) != 1)
+		return -EREMOTEIO;
+
+	return 0;
+}
+
+static int
+va1j5jf8007t_check_frequency(struct va1j5jf8007t_state *state, int *lock)
+{
+	u8 addr;
+	u8 write_buf[2], read_buf[1];
+	struct i2c_msg msgs[2];
+
+	addr = state->config->demod_address;
+
+	write_buf[0] = 0xfe;
+	write_buf[1] = 0xc3;
+
+	msgs[0].addr = addr;
+	msgs[0].flags = 0;
+	msgs[0].len = sizeof(write_buf);
+	msgs[0].buf = write_buf;
+
+	msgs[1].addr = addr;
+	msgs[1].flags = I2C_M_RD;
+	msgs[1].len = sizeof(read_buf);
+	msgs[1].buf = read_buf;
+
+	if (i2c_transfer(state->adap, msgs, 2) != 2)
+		return -EREMOTEIO;
+
+	*lock = read_buf[0] & 0x40;
+	return 0;
+}
+
+static int va1j5jf8007t_set_modulation(struct va1j5jf8007t_state *state)
+{
+	u8 buf[2];
+	struct i2c_msg msg;
+
+	buf[0] = 0x01;
+	buf[1] = 0x40;
+
+	msg.addr = state->config->demod_address;
+	msg.flags = 0;
+	msg.len = sizeof(buf);
+	msg.buf = buf;
+
+	if (i2c_transfer(state->adap, &msg, 1) != 1)
+		return -EREMOTEIO;
+
+	return 0;
+}
+
+static int va1j5jf8007t_check_modulation(struct va1j5jf8007t_state *state,
+					 int *lock, int *retry)
+{
+	u8 addr;
+	u8 write_buf[1], read_buf[1];
+	struct i2c_msg msgs[2];
+
+	addr = state->config->demod_address;
+
+	write_buf[0] = 0x80;
+
+	msgs[0].addr = addr;
+	msgs[0].flags = 0;
+	msgs[0].len = sizeof(write_buf);
+	msgs[0].buf = write_buf;
+
+	msgs[1].addr = addr;
+	msgs[1].flags = I2C_M_RD;
+	msgs[1].len = sizeof(read_buf);
+	msgs[1].buf = read_buf;
+
+	if (i2c_transfer(state->adap, msgs, 2) != 2)
+		return -EREMOTEIO;
+
+	*lock = !(read_buf[0] & 0x10);
+	*retry = read_buf[0] & 0x80;
+	return 0;
+}
+
+static int
+va1j5jf8007t_tune(struct dvb_frontend *fe,
+		  struct dvb_frontend_parameters *params,
+		  unsigned int mode_flags,  unsigned int *delay,
+		  fe_status_t *status)
+{
+	struct va1j5jf8007t_state *state;
+	int ret;
+	int lock, retry;
+
+	state = fe->demodulator_priv;
+
+	if (params != NULL)
+		state->tune_state = VA1J5JF8007T_SET_FREQUENCY;
+
+	switch (state->tune_state) {
+	case VA1J5JF8007T_IDLE:
+		*delay = 3 * HZ;
+		*status = 0;
+		return 0;
+
+	case VA1J5JF8007T_SET_FREQUENCY:
+		ret = va1j5jf8007t_set_frequency(state);
+		if (ret < 0)
+			return ret;
+
+		state->tune_state = VA1J5JF8007T_CHECK_FREQUENCY;
+		*delay = 0;
+		*status = 0;
+		return 0;
+
+	case VA1J5JF8007T_CHECK_FREQUENCY:
+		ret = va1j5jf8007t_check_frequency(state, &lock);
+		if (ret < 0)
+			return ret;
+
+		if (!lock)  {
+			*delay = (HZ + 999) / 1000;
+			*status = 0;
+			return 0;
+		}
+
+		state->tune_state = VA1J5JF8007T_SET_MODULATION;
+		*delay = 0;
+		*status = FE_HAS_SIGNAL;
+		return 0;
+
+	case VA1J5JF8007T_SET_MODULATION:
+		ret = va1j5jf8007t_set_modulation(state);
+		if (ret < 0)
+			return ret;
+
+		state->tune_state = VA1J5JF8007T_CHECK_MODULATION;
+		*delay = 0;
+		*status = FE_HAS_SIGNAL;
+		return 0;
+
+	case VA1J5JF8007T_CHECK_MODULATION:
+		ret = va1j5jf8007t_check_modulation(state, &lock, &retry);
+		if (ret < 0)
+			return ret;
+
+		if (!lock)  {
+			if (!retry)  {
+				state->tune_state = VA1J5JF8007T_ABORT;
+				*delay = 3 * HZ;
+				*status = FE_HAS_SIGNAL;
+				return 0;
+			}
+			*delay = (HZ + 999) / 1000;
+			*status = FE_HAS_SIGNAL;
+			return 0;
+		}
+
+		state->tune_state = VA1J5JF8007T_TRACK;
+		/* fall through */
+
+	case VA1J5JF8007T_TRACK:
+		*delay = 3 * HZ;
+		*status = FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_LOCK;
+		return 0;
+
+	case VA1J5JF8007T_ABORT:
+		*delay = 3 * HZ;
+		*status = FE_HAS_SIGNAL;
+		return 0;
+	}
+
+	BUG();
+}
+
+static int va1j5jf8007t_init_frequency(struct va1j5jf8007t_state *state)
+{
+	u8 buf[7];
+	struct i2c_msg msg;
+
+	buf[0] = 0xfe;
+	buf[1] = 0xc2;
+	buf[2] = 0x01;
+	buf[3] = 0x8f;
+	buf[4] = 0xc1;
+	buf[5] = 0x80;
+	buf[6] = 0x80;
+
+	msg.addr = state->config->demod_address;
+	msg.flags = 0;
+	msg.len = sizeof(buf);
+	msg.buf = buf;
+
+	if (i2c_transfer(state->adap, &msg, 1) != 1)
+		return -EREMOTEIO;
+
+	return 0;
+}
+
+static int va1j5jf8007t_set_sleep(struct va1j5jf8007t_state *state, int sleep)
+{
+	u8 buf[2];
+	struct i2c_msg msg;
+
+	buf[0] = 0x03;
+	buf[1] = sleep ? 0x90 : 0x80;
+
+	msg.addr = state->config->demod_address;
+	msg.flags = 0;
+	msg.len = sizeof(buf);
+	msg.buf = buf;
+
+	if (i2c_transfer(state->adap, &msg, 1) != 1)
+		return -EREMOTEIO;
+
+	return 0;
+}
+
+static int va1j5jf8007t_sleep(struct dvb_frontend *fe)
+{
+	struct va1j5jf8007t_state *state;
+	int ret;
+
+	state = fe->demodulator_priv;
+
+	ret = va1j5jf8007t_init_frequency(state);
+	if (ret < 0)
+		return ret;
+
+	return va1j5jf8007t_set_sleep(state, 1);
+}
+
+static int va1j5jf8007t_init(struct dvb_frontend *fe)
+{
+	struct va1j5jf8007t_state *state;
+
+	state = fe->demodulator_priv;
+	state->tune_state = VA1J5JF8007T_IDLE;
+
+	return va1j5jf8007t_set_sleep(state, 0);
+}
+
+static void va1j5jf8007t_release(struct dvb_frontend *fe)
+{
+	struct va1j5jf8007t_state *state;
+	state = fe->demodulator_priv;
+	kfree(state);
+}
+
+static struct dvb_frontend_ops va1j5jf8007t_ops = {
+	.info = {
+		.name = "VA1J5JF8007 ISDB-T",
+		.type = FE_OFDM,
+		.frequency_min = 90000000,
+		.frequency_max = 770000000,
+		.frequency_stepsize = 142857,
+		.caps = FE_CAN_INVERSION_AUTO | FE_CAN_FEC_AUTO |
+			FE_CAN_QAM_AUTO | FE_CAN_TRANSMISSION_MODE_AUTO |
+			FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_HIERARCHY_AUTO,
+	},
+
+	.get_frontend_algo = va1j5jf8007t_get_frontend_algo,
+	.read_status = va1j5jf8007t_read_status,
+	.tune = va1j5jf8007t_tune,
+	.sleep = va1j5jf8007t_sleep,
+	.init = va1j5jf8007t_init,
+	.release = va1j5jf8007t_release,
+};
+
+static const u8 va1j5jf8007t_prepare_bufs[][2] = {
+	{0x03, 0x90}, {0x14, 0x8f}, {0x1c, 0x2a}, {0x1d, 0xa8}, {0x1e, 0xa2},
+	{0x22, 0x83}, {0x31, 0x0d}, {0x32, 0xe0}, {0x39, 0xd3}, {0x3a, 0x00},
+	{0x5c, 0x40}, {0x5f, 0x80}, {0x75, 0x02}, {0x76, 0x4e}, {0x77, 0x03},
+	{0xef, 0x01}
+};
+
+int va1j5jf8007t_prepare(struct dvb_frontend *fe)
+{
+	struct va1j5jf8007t_state *state;
+	u8 buf[2];
+	struct i2c_msg msg;
+	int i;
+
+	state = fe->demodulator_priv;
+
+	msg.addr = state->config->demod_address;
+	msg.flags = 0;
+	msg.len = sizeof(buf);
+	msg.buf = buf;
+
+	for (i = 0; i < ARRAY_SIZE(va1j5jf8007t_prepare_bufs); i++) {
+		memcpy(buf, va1j5jf8007t_prepare_bufs[i], sizeof(buf));
+		if (i2c_transfer(state->adap, &msg, 1) != 1)
+			return -EREMOTEIO;
+	}
+
+	return va1j5jf8007t_init_frequency(state);
+}
+
+struct dvb_frontend *
+va1j5jf8007t_attach(const struct va1j5jf8007t_config *config,
+		    struct i2c_adapter *adap)
+{
+	struct va1j5jf8007t_state *state;
+	struct dvb_frontend *fe;
+	u8 buf[2];
+	struct i2c_msg msg;
+
+	state = kzalloc(sizeof(struct va1j5jf8007t_state), GFP_KERNEL);
+	if (!state)
+		return NULL;
+
+	state->config = config;
+	state->adap = adap;
+
+	fe = &state->fe;
+	memcpy(&fe->ops, &va1j5jf8007t_ops, sizeof(struct dvb_frontend_ops));
+	fe->demodulator_priv = state;
+
+	buf[0] = 0x01;
+	buf[1] = 0x80;
+
+	msg.addr = state->config->demod_address;
+	msg.flags = 0;
+	msg.len = sizeof(buf);
+	msg.buf = buf;
+
+	if (i2c_transfer(state->adap, &msg, 1) != 1) {
+		kfree(state);
+		return NULL;
+	}
+
+	return fe;
+}
diff --git a/drivers/media/dvb/pt1/va1j5jf8007t.h b/drivers/media/dvb/pt1/va1j5jf8007t.h
new file mode 100644
index 00000000000..ed49906f776
--- /dev/null
+++ b/drivers/media/dvb/pt1/va1j5jf8007t.h
@@ -0,0 +1,40 @@
+/*
+ * ISDB-T driver for VA1J5JF8007
+ *
+ * Copyright (C) 2009 HIRANO Takahito <hiranotaka@zng.info>
+ *
+ * based on pt1dvr - http://pt1dvr.sourceforge.jp/
+ * 	by Tomoaki Ishikawa <tomy@users.sourceforge.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef VA1J5JF8007T_H
+#define VA1J5JF8007T_H
+
+struct va1j5jf8007t_config {
+	u8 demod_address;
+};
+
+struct i2c_adapter;
+
+struct dvb_frontend *
+va1j5jf8007t_attach(const struct va1j5jf8007t_config *config,
+		    struct i2c_adapter *adap);
+
+/* must be called after va1j5jf8007s_attach */
+int va1j5jf8007t_prepare(struct dvb_frontend *fe);
+
+#endif
-- 
cgit v1.2.3


From 5eca4823ea8f99a7109779f68cedb00535aa6834 Mon Sep 17 00:00:00 2001
From: Akihiro Tsukada <tskd2@yahoo.co.jp>
Date: Tue, 25 Aug 2009 02:39:51 -0300
Subject: V4L/DVB (13000): add driver for 774 Friio White USB ISDB-T receiver

This patch adds driver for 774 Friio White, ISDB-T USB receiver

Friio White is an USB 2.0 ISDB-T receiver. (http://www.friio.com/)
The device has a GL861 chip and a Comtech JDVBT90502 canned tuner module.
This driver ignores all the frontend_parameters except frequency,
as ISDB-T shares the same parameter configuration across the country
and thus the device can work like an intelligent one.

As this device does not include a CAM nor hardware descrambling feature,
the driver passes through scrambled TS streams.

There is Friio Black, a variant for ISDB-S, which shares the same USB
Vendor/Product ID with White, but it is not supported in this driver.
They should be identified in the initialization sequence,
but this feature is not tested.

Signed-off-by: Akihiro Tsukada <tskd2@yahoo.co.jp>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/dvb-usb/Kconfig       |   6 +
 drivers/media/dvb/dvb-usb/Makefile      |   3 +
 drivers/media/dvb/dvb-usb/dvb-usb-ids.h |   2 +
 drivers/media/dvb/dvb-usb/friio-fe.c    | 483 +++++++++++++++++++++++++++++
 drivers/media/dvb/dvb-usb/friio.c       | 525 ++++++++++++++++++++++++++++++++
 drivers/media/dvb/dvb-usb/friio.h       |  99 ++++++
 6 files changed, 1118 insertions(+)
 create mode 100644 drivers/media/dvb/dvb-usb/friio-fe.c
 create mode 100644 drivers/media/dvb/dvb-usb/friio.c
 create mode 100644 drivers/media/dvb/dvb-usb/friio.h

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index c5ec9a5f3b3..0e4b97fba38 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -316,3 +316,9 @@ config DVB_USB_CE6230
 	select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE
 	help
 	  Say Y here to support the Intel CE6230 DVB-T USB2.0 receiver
+
+config DVB_USB_FRIIO
+	tristate "Friio ISDB-T USB2.0 Receiver support"
+	depends on DVB_USB
+	help
+	  Say Y here to support the Japanese DTV receiver Friio.
diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile
index f92734ed777..85b83a43d55 100644
--- a/drivers/media/dvb/dvb-usb/Makefile
+++ b/drivers/media/dvb/dvb-usb/Makefile
@@ -79,6 +79,9 @@ obj-$(CONFIG_DVB_USB_CINERGY_T2) += dvb-usb-cinergyT2.o
 dvb-usb-ce6230-objs = ce6230.o
 obj-$(CONFIG_DVB_USB_CE6230) += dvb-usb-ce6230.o
 
+dvb-usb-friio-objs = friio.o friio-fe.o
+obj-$(CONFIG_DVB_USB_FRIIO) += dvb-usb-friio.o
+
 EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
 # due to tuner-xc3028
 EXTRA_CFLAGS += -Idrivers/media/common/tuners
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index 2d51e3c2820..a548c14c194 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -60,6 +60,7 @@
 #define USB_VID_YUAN				0x1164
 #define USB_VID_XTENSIONS			0x1ae7
 #define USB_VID_HUMAX_COEX			0x10b9
+#define USB_VID_774				0x7a69
 
 /* Product IDs */
 #define USB_PID_ADSTECH_USB2_COLD			0xa333
@@ -274,5 +275,6 @@
 #define USB_PID_ELGATO_EYETV_DTT_Dlx			0x0020
 #define USB_PID_DVB_T_USB_STICK_HIGH_SPEED_COLD		0x5000
 #define USB_PID_DVB_T_USB_STICK_HIGH_SPEED_WARM		0x5001
+#define USB_PID_FRIIO_WHITE				0x0001
 
 #endif
diff --git a/drivers/media/dvb/dvb-usb/friio-fe.c b/drivers/media/dvb/dvb-usb/friio-fe.c
new file mode 100644
index 00000000000..c4dfe25cf60
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/friio-fe.c
@@ -0,0 +1,483 @@
+/* DVB USB compliant Linux driver for the Friio USB2.0 ISDB-T receiver.
+ *
+ * Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
+ *
+ * This module is based off the the gl861 and vp702x modules.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, version 2.
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ */
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+
+#include "friio.h"
+
+struct jdvbt90502_state {
+	struct i2c_adapter *i2c;
+	struct dvb_frontend frontend;
+	struct jdvbt90502_config config;
+};
+
+/* NOTE: TC90502 has 16bit register-address? */
+/* register 0x0100 is used for reading PLL status, so reg is u16 here */
+static int jdvbt90502_reg_read(struct jdvbt90502_state *state,
+			       const u16 reg, u8 *buf, const size_t count)
+{
+	int ret;
+	u8 wbuf[3];
+	struct i2c_msg msg[2];
+
+	wbuf[0] = reg & 0xFF;
+	wbuf[1] = 0;
+	wbuf[2] = reg >> 8;
+
+	msg[0].addr = state->config.demod_address;
+	msg[0].flags = 0;
+	msg[0].buf = wbuf;
+	msg[0].len = sizeof(wbuf);
+
+	msg[1].addr = msg[0].addr;
+	msg[1].flags = I2C_M_RD;
+	msg[1].buf = buf;
+	msg[1].len = count;
+
+	ret = i2c_transfer(state->i2c, msg, 2);
+	if (ret != 2) {
+		deb_fe(" reg read failed.\n");
+		return -EREMOTEIO;
+	}
+	return 0;
+}
+
+/* currently 16bit register-address is not used, so reg is u8 here */
+static int jdvbt90502_single_reg_write(struct jdvbt90502_state *state,
+				       const u8 reg, const u8 val)
+{
+	struct i2c_msg msg;
+	u8 wbuf[2];
+
+	wbuf[0] = reg;
+	wbuf[1] = val;
+
+	msg.addr = state->config.demod_address;
+	msg.flags = 0;
+	msg.buf = wbuf;
+	msg.len = sizeof(wbuf);
+
+	if (i2c_transfer(state->i2c, &msg, 1) != 1) {
+		deb_fe(" reg write failed.");
+		return -EREMOTEIO;
+	}
+	return 0;
+}
+
+static int _jdvbt90502_write(struct dvb_frontend *fe, u8 *buf, int len)
+{
+	struct jdvbt90502_state *state = fe->demodulator_priv;
+	int err, i;
+	for (i = 0; i < len - 1; i++) {
+		err = jdvbt90502_single_reg_write(state,
+						  buf[0] + i, buf[i + 1]);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+/* read pll status byte via the demodulator's I2C register */
+/* note: Win box reads it by 8B block at the I2C addr 0x30 from reg:0x80 */
+static int jdvbt90502_pll_read(struct jdvbt90502_state *state, u8 *result)
+{
+	int ret;
+
+	/* +1 for reading */
+	u8 pll_addr_byte = (state->config.pll_address << 1) + 1;
+
+	*result = 0;
+
+	ret = jdvbt90502_single_reg_write(state, JDVBT90502_2ND_I2C_REG,
+					  pll_addr_byte);
+	if (ret)
+		goto error;
+
+	ret = jdvbt90502_reg_read(state, 0x0100, result, 1);
+	if (ret)
+		goto error;
+
+	deb_fe("PLL read val:%02x\n", *result);
+	return 0;
+
+error:
+	deb_fe("%s:ret == %d\n", __func__, ret);
+	return -EREMOTEIO;
+}
+
+
+/* set pll frequency via the demodulator's I2C register */
+static int jdvbt90502_pll_set_freq(struct jdvbt90502_state *state, u32 freq)
+{
+	int ret;
+	int retry;
+	u8 res1;
+	u8 res2[9];
+
+	u8 pll_freq_cmd[PLL_CMD_LEN];
+	u8 pll_agc_cmd[PLL_CMD_LEN];
+	struct i2c_msg msg[2];
+	u32 f;
+
+	deb_fe("%s: freq=%d, step=%d\n", __func__, freq,
+	       state->frontend.ops.info.frequency_stepsize);
+	/* freq -> oscilator frequency conversion. */
+	/* freq: 473,000,000 + n*6,000,000 (no 1/7MHz shift to center freq) */
+	/* add 400[1/7 MHZ] = 57.142857MHz.   57MHz for the IF,  */
+	/*                                   1/7MHz for center freq shift */
+	f = freq / state->frontend.ops.info.frequency_stepsize;
+	f += 400;
+	pll_freq_cmd[DEMOD_REDIRECT_REG] = JDVBT90502_2ND_I2C_REG; /* 0xFE */
+	pll_freq_cmd[ADDRESS_BYTE] = state->config.pll_address << 1;
+	pll_freq_cmd[DIVIDER_BYTE1] = (f >> 8) & 0x7F;
+	pll_freq_cmd[DIVIDER_BYTE2] = f & 0xFF;
+	pll_freq_cmd[CONTROL_BYTE] = 0xB2; /* ref.divider:28, 4MHz/28=1/7MHz */
+	pll_freq_cmd[BANDSWITCH_BYTE] = 0x08;	/* UHF band */
+
+	msg[0].addr = state->config.demod_address;
+	msg[0].flags = 0;
+	msg[0].buf = pll_freq_cmd;
+	msg[0].len = sizeof(pll_freq_cmd);
+
+	ret = i2c_transfer(state->i2c, &msg[0], 1);
+	if (ret != 1)
+		goto error;
+
+	udelay(50);
+
+	pll_agc_cmd[DEMOD_REDIRECT_REG] = pll_freq_cmd[DEMOD_REDIRECT_REG];
+	pll_agc_cmd[ADDRESS_BYTE] = pll_freq_cmd[ADDRESS_BYTE];
+	pll_agc_cmd[DIVIDER_BYTE1] = pll_freq_cmd[DIVIDER_BYTE1];
+	pll_agc_cmd[DIVIDER_BYTE2] = pll_freq_cmd[DIVIDER_BYTE2];
+	pll_agc_cmd[CONTROL_BYTE] = 0x9A; /*  AGC_CTRL instead of BANDSWITCH */
+	pll_agc_cmd[AGC_CTRL_BYTE] = 0x50;
+	/* AGC Time Constant 2s, AGC take-over point:103dBuV(lowest) */
+
+	msg[1].addr = msg[0].addr;
+	msg[1].flags = 0;
+	msg[1].buf = pll_agc_cmd;
+	msg[1].len = sizeof(pll_agc_cmd);
+
+	ret = i2c_transfer(state->i2c, &msg[1], 1);
+	if (ret != 1)
+		goto error;
+
+	/* I don't know what these cmds are for,  */
+	/* but the USB log on a windows box contains them */
+	ret = jdvbt90502_single_reg_write(state, 0x01, 0x40);
+	ret |= jdvbt90502_single_reg_write(state, 0x01, 0x00);
+	if (ret)
+		goto error;
+	udelay(100);
+
+	/* wait for the demod to be ready? */
+#define RETRY_COUNT 5
+	for (retry = 0; retry < RETRY_COUNT; retry++) {
+		ret = jdvbt90502_reg_read(state, 0x0096, &res1, 1);
+		if (ret)
+			goto error;
+		/* if (res1 != 0x00) goto error; */
+		ret = jdvbt90502_reg_read(state, 0x00B0, res2, sizeof(res2));
+		if (ret)
+			goto error;
+		if (res2[0] >= 0xA7)
+			break;
+		msleep(100);
+	}
+	if (retry >= RETRY_COUNT) {
+		deb_fe("%s: FE does not get ready after freq setting.\n",
+		       __func__);
+		return -EREMOTEIO;
+	}
+
+	return 0;
+error:
+	deb_fe("%s:ret == %d\n", __func__, ret);
+	return -EREMOTEIO;
+}
+
+static int jdvbt90502_read_status(struct dvb_frontend *fe, fe_status_t *state)
+{
+	u8 result;
+	int ret;
+
+	*state = FE_HAS_SIGNAL;
+
+	ret = jdvbt90502_pll_read(fe->demodulator_priv, &result);
+	if (ret) {
+		deb_fe("%s:ret == %d\n", __func__, ret);
+		return -EREMOTEIO;
+	}
+
+	*state = FE_HAS_SIGNAL
+		| FE_HAS_CARRIER
+		| FE_HAS_VITERBI
+		| FE_HAS_SYNC;
+
+	if (result & PLL_STATUS_LOCKED)
+		*state |= FE_HAS_LOCK;
+
+	return 0;
+}
+
+static int jdvbt90502_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+	*ber = 0;
+	return 0;
+}
+
+static int jdvbt90502_read_signal_strength(struct dvb_frontend *fe,
+					   u16 *strength)
+{
+	int ret;
+	u8 rbuf[37];
+
+	*strength = 0;
+
+	/* status register (incl. signal strength) : 0x89  */
+	/* TODO: read just the necessary registers [0x8B..0x8D]? */
+	ret = jdvbt90502_reg_read(fe->demodulator_priv, 0x0089,
+				  rbuf, sizeof(rbuf));
+
+	if (ret) {
+		deb_fe("%s:ret == %d\n", __func__, ret);
+		return -EREMOTEIO;
+	}
+
+	/* signal_strength: rbuf[2-4] (24bit BE), use lower 16bit for now. */
+	*strength = (rbuf[3] << 8) + rbuf[4];
+	if (rbuf[2])
+		*strength = 0xffff;
+
+	return 0;
+}
+
+static int jdvbt90502_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+	*snr = 0x0101;
+	return 0;
+}
+
+static int jdvbt90502_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+	*ucblocks = 0;
+	return 0;
+}
+
+static int jdvbt90502_get_tune_settings(struct dvb_frontend *fe,
+					struct dvb_frontend_tune_settings *fs)
+{
+	fs->min_delay_ms = 500;
+	fs->step_size = 0;
+	fs->max_drift = 0;
+
+	return 0;
+}
+
+static int jdvbt90502_get_frontend(struct dvb_frontend *fe,
+				   struct dvb_frontend_parameters *p)
+{
+	p->inversion = INVERSION_AUTO;
+	p->u.ofdm.bandwidth = BANDWIDTH_6_MHZ;
+	p->u.ofdm.code_rate_HP = FEC_AUTO;
+	p->u.ofdm.code_rate_LP = FEC_AUTO;
+	p->u.ofdm.constellation = QAM_64;
+	p->u.ofdm.transmission_mode = TRANSMISSION_MODE_AUTO;
+	p->u.ofdm.guard_interval = GUARD_INTERVAL_AUTO;
+	p->u.ofdm.hierarchy_information = HIERARCHY_AUTO;
+	return 0;
+}
+
+static int jdvbt90502_set_frontend(struct dvb_frontend *fe,
+				   struct dvb_frontend_parameters *p)
+{
+	/**
+	 * NOTE: ignore all the paramters except frequency.
+	 *       others should be fixed to the proper value for ISDB-T,
+	 *       but don't check here.
+	 */
+
+	struct jdvbt90502_state *state = fe->demodulator_priv;
+	int ret;
+
+	deb_fe("%s: Freq:%d\n", __func__, p->frequency);
+
+	ret = jdvbt90502_pll_set_freq(state, p->frequency);
+	if (ret) {
+		deb_fe("%s:ret == %d\n", __func__, ret);
+		return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+static int jdvbt90502_sleep(struct dvb_frontend *fe)
+{
+	deb_fe("%s called.\n", __func__);
+	return 0;
+}
+
+
+/**
+ * (reg, val) commad list to initialize this module.
+ *  captured on a Windows box.
+ */
+static u8 init_code[][2] = {
+	{0x01, 0x40},
+	{0x04, 0x38},
+	{0x05, 0x40},
+	{0x07, 0x40},
+	{0x0F, 0x4F},
+	{0x11, 0x21},
+	{0x12, 0x0B},
+	{0x13, 0x2F},
+	{0x14, 0x31},
+	{0x16, 0x02},
+	{0x21, 0xC4},
+	{0x22, 0x20},
+	{0x2C, 0x79},
+	{0x2D, 0x34},
+	{0x2F, 0x00},
+	{0x30, 0x28},
+	{0x31, 0x31},
+	{0x32, 0xDF},
+	{0x38, 0x01},
+	{0x39, 0x78},
+	{0x3B, 0x33},
+	{0x3C, 0x33},
+	{0x48, 0x90},
+	{0x51, 0x68},
+	{0x5E, 0x38},
+	{0x71, 0x00},
+	{0x72, 0x08},
+	{0x77, 0x00},
+	{0xC0, 0x21},
+	{0xC1, 0x10},
+	{0xE4, 0x1A},
+	{0xEA, 0x1F},
+	{0x77, 0x00},
+	{0x71, 0x00},
+	{0x71, 0x00},
+	{0x76, 0x0C},
+};
+
+const static int init_code_len = sizeof(init_code) / sizeof(u8[2]);
+
+static int jdvbt90502_init(struct dvb_frontend *fe)
+{
+	int i = -1;
+	int ret;
+	struct i2c_msg msg;
+
+	struct jdvbt90502_state *state = fe->demodulator_priv;
+
+	deb_fe("%s called.\n", __func__);
+
+	msg.addr = state->config.demod_address;
+	msg.flags = 0;
+	msg.len = 2;
+	for (i = 0; i < init_code_len; i++) {
+		msg.buf = init_code[i];
+		ret = i2c_transfer(state->i2c, &msg, 1);
+		if (ret != 1)
+			goto error;
+	}
+	msleep(100);
+
+	return 0;
+
+error:
+	deb_fe("%s: init_code[%d] failed. ret==%d\n", __func__, i, ret);
+	return -EREMOTEIO;
+}
+
+
+static void jdvbt90502_release(struct dvb_frontend *fe)
+{
+	struct jdvbt90502_state *state = fe->demodulator_priv;
+	kfree(state);
+}
+
+
+static struct dvb_frontend_ops jdvbt90502_ops;
+
+struct dvb_frontend *jdvbt90502_attach(struct dvb_usb_device *d)
+{
+	struct jdvbt90502_state *state = NULL;
+
+	deb_info("%s called.\n", __func__);
+
+	/* allocate memory for the internal state */
+	state = kzalloc(sizeof(struct jdvbt90502_state), GFP_KERNEL);
+	if (state == NULL)
+		goto error;
+
+	/* setup the state */
+	state->i2c = &d->i2c_adap;
+	memcpy(&state->config, &friio_fe_config, sizeof(friio_fe_config));
+
+	/* create dvb_frontend */
+	memcpy(&state->frontend.ops, &jdvbt90502_ops,
+	       sizeof(jdvbt90502_ops));
+	state->frontend.demodulator_priv = state;
+
+	if (jdvbt90502_init(&state->frontend) < 0)
+		goto error;
+
+	return &state->frontend;
+
+error:
+	kfree(state);
+	return NULL;
+}
+
+static struct dvb_frontend_ops jdvbt90502_ops = {
+
+	.info = {
+		.name			= "Comtech JDVBT90502 ISDB-T",
+		.type			= FE_OFDM,
+		.frequency_min		= 473000000, /* UHF 13ch, center */
+		.frequency_max		= 767142857, /* UHF 62ch, center */
+		.frequency_stepsize	= JDVBT90502_PLL_CLK /
+							JDVBT90502_PLL_DIVIDER,
+		.frequency_tolerance	= 0,
+
+		/* NOTE: this driver ignores all parameters but frequency. */
+		.caps = FE_CAN_INVERSION_AUTO |
+			FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+			FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
+			FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO |
+			FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
+			FE_CAN_TRANSMISSION_MODE_AUTO |
+			FE_CAN_GUARD_INTERVAL_AUTO |
+			FE_CAN_HIERARCHY_AUTO,
+	},
+
+	.release = jdvbt90502_release,
+
+	.init = jdvbt90502_init,
+	.sleep = jdvbt90502_sleep,
+	.write = _jdvbt90502_write,
+
+	.set_frontend = jdvbt90502_set_frontend,
+	.get_frontend = jdvbt90502_get_frontend,
+	.get_tune_settings = jdvbt90502_get_tune_settings,
+
+	.read_status = jdvbt90502_read_status,
+	.read_ber = jdvbt90502_read_ber,
+	.read_signal_strength = jdvbt90502_read_signal_strength,
+	.read_snr = jdvbt90502_read_snr,
+	.read_ucblocks = jdvbt90502_read_ucblocks,
+};
diff --git a/drivers/media/dvb/dvb-usb/friio.c b/drivers/media/dvb/dvb-usb/friio.c
new file mode 100644
index 00000000000..14a65b4aec0
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/friio.c
@@ -0,0 +1,525 @@
+/* DVB USB compliant Linux driver for the Friio USB2.0 ISDB-T receiver.
+ *
+ * Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
+ *
+ * This module is based off the the gl861 and vp702x modules.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, version 2.
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ */
+#include "friio.h"
+
+/* debug */
+int dvb_usb_friio_debug;
+module_param_named(debug, dvb_usb_friio_debug, int, 0644);
+MODULE_PARM_DESC(debug,
+		 "set debugging level (1=info,2=xfer,4=rc,8=fe (or-able))."
+		 DVB_USB_DEBUG_STATUS);
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+/**
+ * Indirect I2C access to the PLL via FE.
+ * whole I2C protocol data to the PLL is sent via the FE's I2C register.
+ * This is done by a control msg to the FE with the I2C data accompanied, and
+ * a specific USB request number is assigned for that purpose.
+ *
+ * this func sends wbuf[1..] to the I2C register wbuf[0] at addr (= at FE).
+ * TODO: refoctored, smarter i2c functions.
+ */
+static int gl861_i2c_ctrlmsg_data(struct dvb_usb_device *d, u8 addr,
+				  u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
+{
+	u16 index = wbuf[0];	/* must be JDVBT90502_2ND_I2C_REG(=0xFE) */
+	u16 value = addr << (8 + 1);
+	int wo = (rbuf == NULL || rlen == 0);	/* write only */
+	u8 req, type;
+
+	deb_xfer("write to PLL:0x%02x via FE reg:0x%02x, len:%d\n",
+		 wbuf[1], wbuf[0], wlen - 1);
+
+	if (wo && wlen >= 2) {
+		req = GL861_REQ_I2C_DATA_CTRL_WRITE;
+		type = GL861_WRITE;
+		udelay(20);
+		return usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
+				       req, type, value, index,
+				       &wbuf[1], wlen - 1, 2000);
+	}
+
+	deb_xfer("not supported ctrl-msg, aborting.");
+	return -EINVAL;
+}
+
+/* normal I2C access (without extra data arguments).
+ * write to the register wbuf[0] at I2C address addr with the value wbuf[1],
+ *  or read from the register wbuf[0].
+ * register address can be 16bit (wbuf[2]<<8 | wbuf[0]) if wlen==3
+ */
+static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr,
+			 u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
+{
+	u16 index;
+	u16 value = addr << (8 + 1);
+	int wo = (rbuf == NULL || rlen == 0);	/* write-only */
+	u8 req, type;
+	unsigned int pipe;
+
+	/* special case for the indirect I2C access to the PLL via FE, */
+	if (addr == friio_fe_config.demod_address &&
+	    wbuf[0] == JDVBT90502_2ND_I2C_REG)
+		return gl861_i2c_ctrlmsg_data(d, addr, wbuf, wlen, rbuf, rlen);
+
+	if (wo) {
+		req = GL861_REQ_I2C_WRITE;
+		type = GL861_WRITE;
+		pipe = usb_sndctrlpipe(d->udev, 0);
+	} else {		/* rw */
+		req = GL861_REQ_I2C_READ;
+		type = GL861_READ;
+		pipe = usb_rcvctrlpipe(d->udev, 0);
+	}
+
+	switch (wlen) {
+	case 1:
+		index = wbuf[0];
+		break;
+	case 2:
+		index = wbuf[0];
+		value = value + wbuf[1];
+		break;
+	case 3:
+		/* special case for 16bit register-address */
+		index = (wbuf[2] << 8) | wbuf[0];
+		value = value + wbuf[1];
+		break;
+	default:
+		deb_xfer("wlen = %x, aborting.", wlen);
+		return -EINVAL;
+	}
+	msleep(1);
+	return usb_control_msg(d->udev, pipe, req, type,
+			       value, index, rbuf, rlen, 2000);
+}
+
+/* I2C */
+static int gl861_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
+			  int num)
+{
+	struct dvb_usb_device *d = i2c_get_adapdata(adap);
+	int i;
+
+
+	if (num > 2)
+		return -EINVAL;
+
+	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+		return -EAGAIN;
+
+	for (i = 0; i < num; i++) {
+		/* write/read request */
+		if (i + 1 < num && (msg[i + 1].flags & I2C_M_RD)) {
+			if (gl861_i2c_msg(d, msg[i].addr,
+					  msg[i].buf, msg[i].len,
+					  msg[i + 1].buf, msg[i + 1].len) < 0)
+				break;
+			i++;
+		} else
+			if (gl861_i2c_msg(d, msg[i].addr, msg[i].buf,
+					  msg[i].len, NULL, 0) < 0)
+				break;
+	}
+
+	mutex_unlock(&d->i2c_mutex);
+	return i;
+}
+
+static u32 gl861_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C;
+}
+
+
+static int friio_ext_ctl(struct dvb_usb_adapter *adap,
+			 u32 sat_color, int lnb_on)
+{
+	int i;
+	int ret;
+	struct i2c_msg msg;
+	u8 buf[2];
+	u32 mask;
+	u8 lnb = (lnb_on) ? FRIIO_CTL_LNB : 0;
+
+	msg.addr = 0x00;
+	msg.flags = 0;
+	msg.len = 2;
+	msg.buf = buf;
+
+	buf[0] = 0x00;
+
+	/* send 2bit header (&B10) */
+	buf[1] = lnb | FRIIO_CTL_LED | FRIIO_CTL_STROBE;
+	ret = gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
+	buf[1] |= FRIIO_CTL_CLK;
+	ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
+
+	buf[1] = lnb | FRIIO_CTL_STROBE;
+	ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
+	buf[1] |= FRIIO_CTL_CLK;
+	ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
+
+	/* send 32bit(satur, R, G, B) data in serial */
+	mask = 1 << 31;
+	for (i = 0; i < 32; i++) {
+		buf[1] = lnb | FRIIO_CTL_STROBE;
+		if (sat_color & mask)
+			buf[1] |= FRIIO_CTL_LED;
+		ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
+		buf[1] |= FRIIO_CTL_CLK;
+		ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
+		mask >>= 1;
+	}
+
+	/* set the strobe off */
+	buf[1] = lnb;
+	ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
+	buf[1] |= FRIIO_CTL_CLK;
+	ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
+
+	return (ret == 70);
+}
+
+
+static int friio_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff);
+
+/* TODO: move these init cmds to the FE's init routine? */
+static u8 streaming_init_cmds[][2] = {
+	{0x33, 0x08},
+	{0x37, 0x40},
+	{0x3A, 0x1F},
+	{0x3B, 0xFF},
+	{0x3C, 0x1F},
+	{0x3D, 0xFF},
+	{0x38, 0x00},
+	{0x35, 0x00},
+	{0x39, 0x00},
+	{0x36, 0x00},
+};
+static int cmdlen = sizeof(streaming_init_cmds) / 2;
+
+/*
+ * Command sequence in this init function is a replay
+ *  of the captured USB commands from the Windows proprietary driver.
+ */
+static int friio_initialize(struct dvb_usb_device *d)
+{
+	int ret;
+	int i;
+	int retry = 0;
+	u8 rbuf[2];
+	u8 wbuf[3];
+
+	deb_info("%s called.\n", __func__);
+
+	/* use gl861_i2c_msg instead of gl861_i2c_xfer(), */
+	/* because the i2c device is not set up yet. */
+	wbuf[0] = 0x11;
+	wbuf[1] = 0x02;
+	ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
+	if (ret < 0)
+		goto error;
+	msleep(2);
+
+	wbuf[0] = 0x11;
+	wbuf[1] = 0x00;
+	ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
+	if (ret < 0)
+		goto error;
+	msleep(1);
+
+	/* following msgs should be in the FE's init code? */
+	/* cmd sequence to identify the device type? (friio black/white) */
+	wbuf[0] = 0x03;
+	wbuf[1] = 0x80;
+	/* can't use gl861_i2c_cmd, as the register-addr is 16bit(0x0100) */
+	ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
+			      GL861_REQ_I2C_DATA_CTRL_WRITE, GL861_WRITE,
+			      0x1200, 0x0100, wbuf, 2, 2000);
+	if (ret < 0)
+		goto error;
+
+	msleep(2);
+	wbuf[0] = 0x00;
+	wbuf[2] = 0x01;		/* reg.0x0100 */
+	wbuf[1] = 0x00;
+	ret = gl861_i2c_msg(d, 0x12 >> 1, wbuf, 3, rbuf, 2);
+	/* my Friio White returns 0xffff. */
+	if (ret < 0 || rbuf[0] != 0xff || rbuf[1] != 0xff)
+		goto error;
+
+	msleep(2);
+	wbuf[0] = 0x03;
+	wbuf[1] = 0x80;
+	ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
+			      GL861_REQ_I2C_DATA_CTRL_WRITE, GL861_WRITE,
+			      0x9000, 0x0100, wbuf, 2, 2000);
+	if (ret < 0)
+		goto error;
+
+	msleep(2);
+	wbuf[0] = 0x00;
+	wbuf[2] = 0x01;		/* reg.0x0100 */
+	wbuf[1] = 0x00;
+	ret = gl861_i2c_msg(d, 0x90 >> 1, wbuf, 3, rbuf, 2);
+	/* my Friio White returns 0xffff again. */
+	if (ret < 0 || rbuf[0] != 0xff || rbuf[1] != 0xff)
+		goto error;
+
+	msleep(1);
+
+restart:
+	/* ============ start DEMOD init cmds ================== */
+	/* read PLL status to clear the POR bit */
+	wbuf[0] = JDVBT90502_2ND_I2C_REG;
+	wbuf[1] = (FRIIO_PLL_ADDR << 1) + 1;	/* +1 for reading */
+	ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 2, NULL, 0);
+	if (ret < 0)
+		goto error;
+
+	msleep(5);
+	/* note: DEMODULATOR has 16bit register-address. */
+	wbuf[0] = 0x00;
+	wbuf[2] = 0x01;		/* reg addr: 0x0100 */
+	wbuf[1] = 0x00;		/* val: not used */
+	ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 3, rbuf, 1);
+	if (ret < 0)
+		goto error;
+/*
+	msleep(1);
+	wbuf[0] = 0x80;
+	wbuf[1] = 0x00;
+	ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 2, rbuf, 1);
+	if (ret < 0)
+		goto error;
+ */
+	if (rbuf[0] & 0x80) {	/* still in PowerOnReset state? */
+		if (++retry > 3) {
+			deb_info("failed to get the correct"
+				 " FE demod status:0x%02x\n", rbuf[0]);
+			goto error;
+		}
+		msleep(100);
+		goto restart;
+	}
+
+	/* TODO: check return value in rbuf */
+	/* =========== end DEMOD init cmds ===================== */
+	msleep(1);
+
+	wbuf[0] = 0x30;
+	wbuf[1] = 0x04;
+	ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
+	if (ret < 0)
+		goto error;
+
+	msleep(2);
+	/* following 2 cmds unnecessary? */
+	wbuf[0] = 0x00;
+	wbuf[1] = 0x01;
+	ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
+	if (ret < 0)
+		goto error;
+
+	wbuf[0] = 0x06;
+	wbuf[1] = 0x0F;
+	ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
+	if (ret < 0)
+		goto error;
+
+	/* some streaming ctl cmds (maybe) */
+	msleep(10);
+	for (i = 0; i < cmdlen; i++) {
+		ret = gl861_i2c_msg(d, 0x00, streaming_init_cmds[i], 2,
+				    NULL, 0);
+		if (ret < 0)
+			goto error;
+		msleep(1);
+	}
+	msleep(20);
+
+	/* change the LED color etc. */
+	ret = friio_streaming_ctrl(&d->adapter[0], 0);
+	if (ret < 0)
+		goto error;
+
+	return 0;
+
+error:
+	deb_info("%s:ret == %d\n", __func__, ret);
+	return -EIO;
+}
+
+/* Callbacks for DVB USB */
+
+static int friio_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
+{
+	int ret;
+
+	deb_info("%s called.(%d)\n", __func__, onoff);
+
+	/* set the LED color and saturation (and LNB on) */
+	if (onoff)
+		ret = friio_ext_ctl(adap, 0x6400ff64, 1);
+	else
+		ret = friio_ext_ctl(adap, 0x96ff00ff, 1);
+
+	if (ret != 1) {
+		deb_info("%s failed to send cmdx. ret==%d\n", __func__, ret);
+		return -EREMOTEIO;
+	}
+	return 0;
+}
+
+static int friio_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	if (friio_initialize(adap->dev) < 0)
+		return -EIO;
+
+	adap->fe = jdvbt90502_attach(adap->dev);
+	if (adap->fe == NULL)
+		return -EIO;
+
+	return 0;
+}
+
+/* DVB USB Driver stuff */
+static struct dvb_usb_device_properties friio_properties;
+
+static int friio_probe(struct usb_interface *intf,
+		       const struct usb_device_id *id)
+{
+	struct dvb_usb_device *d;
+	struct usb_host_interface *alt;
+	int ret;
+
+	if (intf->num_altsetting < GL861_ALTSETTING_COUNT)
+		return -ENODEV;
+
+	alt = usb_altnum_to_altsetting(intf, FRIIO_BULK_ALTSETTING);
+	if (alt == NULL) {
+		deb_rc("not alt found!\n");
+		return -ENODEV;
+	}
+	ret = usb_set_interface(interface_to_usbdev(intf),
+				alt->desc.bInterfaceNumber,
+				alt->desc.bAlternateSetting);
+	if (ret != 0) {
+		deb_rc("failed to set alt-setting!\n");
+		return ret;
+	}
+
+	ret = dvb_usb_device_init(intf, &friio_properties,
+				  THIS_MODULE, &d, adapter_nr);
+	if (ret == 0)
+		friio_streaming_ctrl(&d->adapter[0], 1);
+
+	return ret;
+}
+
+
+struct jdvbt90502_config friio_fe_config = {
+	.demod_address = FRIIO_DEMOD_ADDR,
+	.pll_address = FRIIO_PLL_ADDR,
+};
+
+static struct i2c_algorithm gl861_i2c_algo = {
+	.master_xfer   = gl861_i2c_xfer,
+	.functionality = gl861_i2c_func,
+};
+
+static struct usb_device_id friio_table[] = {
+	{ USB_DEVICE(USB_VID_774, USB_PID_FRIIO_WHITE) },
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, friio_table);
+
+
+static struct dvb_usb_device_properties friio_properties = {
+	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
+	.usb_ctrl = DEVICE_SPECIFIC,
+
+	.size_of_priv = 0,
+
+	.num_adapters = 1,
+	.adapter = {
+		/* caps:0 =>  no pid filter, 188B TS packet */
+		/* GL861 has a HW pid filter, but no info available. */
+		{
+			.caps  = 0,
+
+			.frontend_attach  = friio_frontend_attach,
+			.streaming_ctrl = friio_streaming_ctrl,
+
+			.stream = {
+				.type = USB_BULK,
+				/* count <= MAX_NO_URBS_FOR_DATA_STREAM(10) */
+				.count = 8,
+				.endpoint = 0x01,
+				.u = {
+					/* GL861 has 6KB buf inside */
+					.bulk = {
+						.buffersize = 16384,
+					}
+				}
+			},
+		}
+	},
+	.i2c_algo = &gl861_i2c_algo,
+
+	.num_device_descs = 1,
+	.devices = {
+		{
+			.name = "774 Friio ISDB-T USB2.0",
+			.cold_ids = { NULL },
+			.warm_ids = { &friio_table[0], NULL },
+		},
+	}
+};
+
+static struct usb_driver friio_driver = {
+	.name		= "dvb_usb_friio",
+	.probe		= friio_probe,
+	.disconnect	= dvb_usb_device_exit,
+	.id_table	= friio_table,
+};
+
+
+/* module stuff */
+static int __init friio_module_init(void)
+{
+	int ret;
+
+	ret = usb_register(&friio_driver);
+	if (ret)
+		err("usb_register failed. Error number %d", ret);
+
+	return ret;
+}
+
+
+static void __exit friio_module_exit(void)
+{
+	/* deregister this driver from the USB subsystem */
+	usb_deregister(&friio_driver);
+}
+
+module_init(friio_module_init);
+module_exit(friio_module_exit);
+
+MODULE_AUTHOR("Akihiro Tsukada <tskd2@yahoo.co.jp>");
+MODULE_DESCRIPTION("Driver for Friio ISDB-T USB2.0 Receiver");
+MODULE_VERSION("0.2");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/friio.h b/drivers/media/dvb/dvb-usb/friio.h
new file mode 100644
index 00000000000..af8d55e390f
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/friio.h
@@ -0,0 +1,99 @@
+/* DVB USB compliant Linux driver for the Friio USB2.0 ISDB-T receiver.
+ *
+ * Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
+ *
+ * This module is based off the the gl861 and vp702x modules.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, version 2.
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ */
+#ifndef _DVB_USB_FRIIO_H_
+#define _DVB_USB_FRIIO_H_
+
+/**
+ *      Friio Components
+ *       USB hub:                                AU4254
+ *         USB controller(+ TS dmx & streaming): GL861
+ *         Frontend:                             comtech JDVBT-90502
+ *             (tuner PLL:                       tua6034, I2C addr:(0xC0 >> 1))
+ *             (OFDM demodulator:                TC90502, I2C addr:(0x30 >> 1))
+ *         LED x3 (+LNB) controll:               PIC 16F676
+ *         EEPROM:                               24C08
+ *
+ *        (USB smart card reader:                AU9522)
+ *
+ */
+
+#define DVB_USB_LOG_PREFIX "friio"
+#include "dvb-usb.h"
+
+extern int dvb_usb_friio_debug;
+#define deb_info(args...) dprintk(dvb_usb_friio_debug, 0x01, args)
+#define deb_xfer(args...) dprintk(dvb_usb_friio_debug, 0x02, args)
+#define deb_rc(args...)   dprintk(dvb_usb_friio_debug, 0x04, args)
+#define deb_fe(args...)   dprintk(dvb_usb_friio_debug, 0x08, args)
+
+/* Vendor requests */
+#define GL861_WRITE		0x40
+#define GL861_READ		0xc0
+
+/* command bytes */
+#define GL861_REQ_I2C_WRITE	0x01
+#define GL861_REQ_I2C_READ	0x02
+/* For control msg with data argument */
+/* Used for accessing the PLL on the secondary I2C bus of FE via GL861 */
+#define GL861_REQ_I2C_DATA_CTRL_WRITE	0x03
+
+#define GL861_ALTSETTING_COUNT	2
+#define FRIIO_BULK_ALTSETTING	0
+#define FRIIO_ISOC_ALTSETTING	1
+
+/* LED & LNB control via PIC. */
+/* basically, it's serial control with clock and strobe. */
+/* write the below 4bit control data to the reg 0x00 at the I2C addr 0x00 */
+/* when controlling the LEDs, 32bit(saturation, R, G, B) is sent on the bit3*/
+#define FRIIO_CTL_LNB (1 << 0)
+#define FRIIO_CTL_STROBE (1 << 1)
+#define FRIIO_CTL_CLK (1 << 2)
+#define FRIIO_CTL_LED (1 << 3)
+
+/* Front End related */
+
+#define FRIIO_DEMOD_ADDR  (0x30 >> 1)
+#define FRIIO_PLL_ADDR  (0xC0 >> 1)
+
+#define JDVBT90502_PLL_CLK	4000000
+#define JDVBT90502_PLL_DIVIDER	28
+
+#define JDVBT90502_2ND_I2C_REG 0xFE
+
+/* byte index for pll i2c command data structure*/
+/* see datasheet for tua6034 */
+#define DEMOD_REDIRECT_REG 0
+#define ADDRESS_BYTE       1
+#define DIVIDER_BYTE1      2
+#define DIVIDER_BYTE2      3
+#define CONTROL_BYTE       4
+#define BANDSWITCH_BYTE    5
+#define AGC_CTRL_BYTE      5
+#define PLL_CMD_LEN        6
+
+/* bit masks for PLL STATUS response */
+#define PLL_STATUS_POR_MODE   0x80 /* 1: Power on Reset (test) Mode */
+#define PLL_STATUS_LOCKED     0x40 /* 1: locked */
+#define PLL_STATUS_AGC_ACTIVE 0x08 /* 1:active */
+#define PLL_STATUS_TESTMODE   0x07 /* digital output level (5 level) */
+  /* 0.15Vcc step   0x00: < 0.15Vcc, ..., 0x04: >= 0.6Vcc (<= 1Vcc) */
+
+
+struct jdvbt90502_config {
+	u8 demod_address; /* i2c addr for demodulator IC */
+	u8 pll_address;   /* PLL addr on the secondary i2c*/
+};
+extern struct jdvbt90502_config friio_fe_config;
+
+extern struct dvb_frontend *jdvbt90502_attach(struct dvb_usb_device *d);
+#endif
-- 
cgit v1.2.3


From 2d21ffe05a188ee7e5583172c06f2b820c4ad44a Mon Sep 17 00:00:00 2001
From: Dmitri Belimov <d.belimov@gmail.com>
Date: Mon, 7 Sep 2009 20:36:05 -0300
Subject: V4L/DVB (13001): Key filter for BeholdTV cards.

When fast push-pull button of remote control we can received incorrect
key code 0x00. Key information from IR decoder has ID of remote control 2 bytes,
byte of key code and byte of mirror key code.
Correct data
0x86 0x6B 0x00 0xFF

Wrong data
0x86 0x6B 0x00 0x00

This patch added additional test of mirror byte for filtering.

Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7134/saa7134-input.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index e1e83c7b966..a0e8c62e6ae 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -251,6 +251,10 @@ static int get_key_beholdm6xx(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 	if (data[10] != 0x6b && data[11] != 0x86 && disable_other_ir)
 		return 0;
 
+	/* Wrong data decode fix */
+	if (data[9] != (unsigned char)(~data[8]))
+		return 0;
+
 	*ir_key = data[9];
 	*ir_raw = data[9];
 
-- 
cgit v1.2.3


From 6c119ff493039af862ae57d88d52b4383c9d8ece Mon Sep 17 00:00:00 2001
From: Henk Vergonet <Henk.Vergonet@gmail.com>
Date: Fri, 18 Sep 2009 20:44:37 -0300
Subject: V4L/DVB (13002): Adds support for Zolid Hybrid PCI card:

http://linuxtv.org/wiki/index.php/Zolid_Hybrid_TV_Tuner

test status analog (PAL-B):
- Sometimes picture is noisy, but it becomes crystal clear after
  switching between channels. (happens for example at 687.25 Mhz)
- On a lower frequency (511.25 Mhz) the picture is always sharp, but
  lacks colour.
- No sound problems.
- radio untested.

Digital:
- DVB-T/H stream reception works.
- Would expect to see some more channels in the higher frequency region.

Overall is the impression that sensitivity still needs improvement
both in analog and digital modes.

Signed-off-by: Henk Vergonet <Henk.Vergonet@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7134/saa7134-cards.c | 27 +++++++++++++++++++++++++++
 drivers/media/video/saa7134/saa7134-dvb.c   | 29 +++++++++++++++++++++++++++++
 drivers/media/video/saa7134/saa7134.h       |  1 +
 3 files changed, 57 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index 14b9ba4579b..9210d3ea694 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -5257,6 +5257,27 @@ struct saa7134_board saa7134_boards[] = {
 			.amux = TV,
 		},
 	},
+	[SAA7134_BOARD_ZOLID_HYBRID_PCI] = {
+		.name           = "Zolid Hybrid TV Tuner PCI",
+		.audio_clock    = 0x00187de7,
+		.tuner_type     = TUNER_PHILIPS_TDA8290,
+		.radio_type     = UNSET,
+		.tuner_addr     = ADDR_UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.tuner_config   = 0,
+		.mpeg           = SAA7134_MPEG_DVB,
+		.ts_type	= SAA7134_MPEG_TS_PARALLEL,
+		.inputs         = {{
+			.name = name_tv,
+			.vmux = 1,
+			.amux = TV,
+			.tv   = 1,
+		} },
+		.radio = {	/* untested */
+			.name = name_radio,
+			.amux = TV,
+		},
+	},
 
 };
 
@@ -6389,6 +6410,12 @@ struct pci_device_id saa7134_pci_tbl[] = {
 		.subvendor    = 0x19d1, /* RoverMedia */
 		.subdevice    = 0x0138, /* LifeView FlyTV Prime30 OEM */
 		.driver_data  = SAA7134_BOARD_ROVERMEDIA_LINK_PRO_FM,
+	}, {
+		.vendor       = PCI_VENDOR_ID_PHILIPS,
+		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
+		.subvendor    = PCI_VENDOR_ID_PHILIPS,
+		.subdevice    = 0x2004,
+		.driver_data  = SAA7134_BOARD_ZOLID_HYBRID_PCI,
 	}, {
 		/* --- boards without eeprom + subsystem ID --- */
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
index 7e1ffd8ba26..a26e997a9ce 100644
--- a/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/drivers/media/video/saa7134/saa7134-dvb.c
@@ -1014,6 +1014,22 @@ static struct tda829x_config tda829x_no_probe = {
 	.probe_tuner = TDA829X_DONT_PROBE,
 };
 
+static struct tda10048_config zolid_tda10048_config = {
+	.demod_address    = 0x10 >> 1,
+	.output_mode      = TDA10048_PARALLEL_OUTPUT,
+	.fwbulkwritelen   = TDA10048_BULKWRITE_200,
+	.inversion        = TDA10048_INVERSION_ON,
+	.dtv6_if_freq_khz = TDA10048_IF_3300,
+	.dtv7_if_freq_khz = TDA10048_IF_3500,
+	.dtv8_if_freq_khz = TDA10048_IF_4000,
+	.clk_freq_khz     = TDA10048_CLK_16000,
+	.disable_gate_access = 1,
+};
+
+static struct tda18271_config zolid_tda18271_config = {
+	.gate    = TDA18271_GATE_ANALOG,
+};
+
 /* ==================================================================
  * Core code
  */
@@ -1488,6 +1504,19 @@ static int dvb_init(struct saa7134_dev *dev)
 				wprintk("%s: No zl10039 found!\n",
 					__func__);
 
+		break;
+	case SAA7134_BOARD_ZOLID_HYBRID_PCI:
+		fe0->dvb.frontend = dvb_attach(tda10048_attach,
+					       &zolid_tda10048_config,
+					       &dev->i2c_adap);
+		if (fe0->dvb.frontend != NULL) {
+			dvb_attach(tda829x_attach, fe0->dvb.frontend,
+				   &dev->i2c_adap, 0x4b,
+				   &tda829x_no_probe);
+			dvb_attach(tda18271_attach, fe0->dvb.frontend,
+				   0x60, &dev->i2c_adap,
+				   &zolid_tda18271_config);
+		}
 		break;
 	default:
 		wprintk("Huh? unknown DVB card?\n");
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index d18bb964385..6ee3e9b7769 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -296,6 +296,7 @@ struct saa7134_format {
 #define SAA7134_BOARD_AVERMEDIA_STUDIO_505  170
 #define SAA7134_BOARD_BEHOLD_X7             171
 #define SAA7134_BOARD_ROVERMEDIA_LINK_PRO_FM 172
+#define SAA7134_BOARD_ZOLID_HYBRID_PCI		173
 
 #define SAA7134_MAXBOARDS 32
 #define SAA7134_INPUT_MAX 8
-- 
cgit v1.2.3


From 607cfab6e7bce8049e61795e86f9bbbe07abd514 Mon Sep 17 00:00:00 2001
From: Andreas Mohr <andi@lisas.de>
Date: Mon, 14 Sep 2009 19:13:29 -0300
Subject: V4L/DVB (13003): Correct dangerous and inefficient msecs_to_jiffies()
 calculation in some V4L2 drivers

Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/et61x251/et61x251_core.c | 6 ++++--
 drivers/media/video/sn9c102/sn9c102_core.c   | 6 ++++--
 drivers/media/video/zc0301/zc0301_core.c     | 6 ++++--
 3 files changed, 12 insertions(+), 6 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/et61x251/et61x251_core.c b/drivers/media/video/et61x251/et61x251_core.c
index d1c1e457f0b..74092f436be 100644
--- a/drivers/media/video/et61x251/et61x251_core.c
+++ b/drivers/media/video/et61x251/et61x251_core.c
@@ -1379,8 +1379,10 @@ et61x251_read(struct file* filp, char __user * buf,
 			    (!list_empty(&cam->outqueue)) ||
 			    (cam->state & DEV_DISCONNECTED) ||
 			    (cam->state & DEV_MISCONFIGURED),
-			    cam->module_param.frame_timeout *
-			    1000 * msecs_to_jiffies(1) );
+			    msecs_to_jiffies(
+				cam->module_param.frame_timeout * 1000
+			    )
+			  );
 		if (timeout < 0) {
 			mutex_unlock(&cam->fileop_mutex);
 			return timeout;
diff --git a/drivers/media/video/sn9c102/sn9c102_core.c b/drivers/media/video/sn9c102/sn9c102_core.c
index 23edfdc4d4b..9d84c94e8a4 100644
--- a/drivers/media/video/sn9c102/sn9c102_core.c
+++ b/drivers/media/video/sn9c102/sn9c102_core.c
@@ -1954,8 +1954,10 @@ sn9c102_read(struct file* filp, char __user * buf, size_t count, loff_t* f_pos)
 				    (!list_empty(&cam->outqueue)) ||
 				    (cam->state & DEV_DISCONNECTED) ||
 				    (cam->state & DEV_MISCONFIGURED),
-				    cam->module_param.frame_timeout *
-				    1000 * msecs_to_jiffies(1) );
+				    msecs_to_jiffies(
+					cam->module_param.frame_timeout * 1000
+				    )
+				  );
 			if (timeout < 0) {
 				mutex_unlock(&cam->fileop_mutex);
 				return timeout;
diff --git a/drivers/media/video/zc0301/zc0301_core.c b/drivers/media/video/zc0301/zc0301_core.c
index 96971044fc7..b3c6436b33b 100644
--- a/drivers/media/video/zc0301/zc0301_core.c
+++ b/drivers/media/video/zc0301/zc0301_core.c
@@ -819,8 +819,10 @@ zc0301_read(struct file* filp, char __user * buf, size_t count, loff_t* f_pos)
 			    (!list_empty(&cam->outqueue)) ||
 			    (cam->state & DEV_DISCONNECTED) ||
 			    (cam->state & DEV_MISCONFIGURED),
-			    cam->module_param.frame_timeout *
-			    1000 * msecs_to_jiffies(1) );
+			    msecs_to_jiffies(
+				cam->module_param.frame_timeout * 1000
+			    )
+			  );
 		if (timeout < 0) {
 			mutex_unlock(&cam->fileop_mutex);
 			return timeout;
-- 
cgit v1.2.3


From be3bdfb6e01f3e72b814758606e89d4829e9e88f Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Erik=20Andr=C3=A9n?= <erik.andren@gmail.com>
Date: Mon, 22 Jun 2009 11:12:29 -0300
Subject: V4L/DVB (13004): gspca - stv06xx: Harmonize the debug macros when
 tracing writes and reads
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/stv06xx/stv06xx.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.c b/drivers/media/video/gspca/stv06xx/stv06xx.c
index 7af511b5e9c..dba6394ae9a 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx.c
+++ b/drivers/media/video/gspca/stv06xx/stv06xx.c
@@ -50,7 +50,6 @@ int stv06xx_write_bridge(struct sd *sd, u16 address, u16 i2c_data)
 			      0x04, 0x40, address, 0, buf, len,
 			      STV06XX_URB_MSG_TIMEOUT);
 
-
 	PDEBUG(D_CONF, "Written 0x%x to address 0x%x, status: %d",
 	       i2c_data, address, err);
 
@@ -69,7 +68,7 @@ int stv06xx_read_bridge(struct sd *sd, u16 address, u8 *i2c_data)
 
 	*i2c_data = buf[0];
 
-	PDEBUG(D_CONF, "Read 0x%x from address 0x%x, status %d",
+	PDEBUG(D_CONF, "Reading 0x%x from address 0x%x, status %d",
 	       *i2c_data, address, err);
 
 	return (err < 0) ? err : 0;
@@ -111,14 +110,14 @@ int stv06xx_write_sensor_bytes(struct sd *sd, const u8 *data, u8 len)
 	struct usb_device *udev = sd->gspca_dev.dev;
 	__u8 *buf = sd->gspca_dev.usb_buf;
 
-	PDEBUG(D_USBO, "I2C: Command buffer contains %d entries", len);
+	PDEBUG(D_CONF, "I2C: Command buffer contains %d entries", len);
 	for (i = 0; i < len;) {
 		/* Build the command buffer */
 		memset(buf, 0, I2C_BUFFER_LENGTH);
 		for (j = 0; j < I2C_MAX_BYTES && i < len; j++, i++) {
 			buf[j] = data[2*i];
 			buf[0x10 + j] = data[2*i+1];
-			PDEBUG(D_USBO, "I2C: Writing 0x%02x to reg 0x%02x",
+			PDEBUG(D_CONF, "I2C: Writing 0x%02x to reg 0x%02x",
 			data[2*i+1], data[2*i]);
 		}
 		buf[0x20] = sd->sensor->i2c_addr;
@@ -140,7 +139,7 @@ int stv06xx_write_sensor_words(struct sd *sd, const u16 *data, u8 len)
 	struct usb_device *udev = sd->gspca_dev.dev;
 	__u8 *buf = sd->gspca_dev.usb_buf;
 
-	PDEBUG(D_USBO, "I2C: Command buffer contains %d entries", len);
+	PDEBUG(D_CONF, "I2C: Command buffer contains %d entries", len);
 
 	for (i = 0; i < len;) {
 		/* Build the command buffer */
@@ -149,7 +148,7 @@ int stv06xx_write_sensor_words(struct sd *sd, const u16 *data, u8 len)
 			buf[j] = data[2*i];
 			buf[0x10 + j * 2] = data[2*i+1];
 			buf[0x10 + j * 2 + 1] = data[2*i+1] >> 8;
-			PDEBUG(D_USBO, "I2C: Writing 0x%04x to reg 0x%02x",
+			PDEBUG(D_CONF, "I2C: Writing 0x%04x to reg 0x%02x",
 				data[2*i+1], data[2*i]);
 		}
 		buf[0x20] = sd->sensor->i2c_addr;
@@ -189,7 +188,7 @@ int stv06xx_read_sensor(struct sd *sd, const u8 address, u16 *value)
 			      0x04, 0x40, 0x1400, 0, buf, I2C_BUFFER_LENGTH,
 			      STV06XX_URB_MSG_TIMEOUT);
 	if (err < 0) {
-		PDEBUG(D_ERR, "I2C Read: error writing address: %d", err);
+		PDEBUG(D_ERR, "I2C: Read error writing address: %d", err);
 		return err;
 	}
 
@@ -201,7 +200,7 @@ int stv06xx_read_sensor(struct sd *sd, const u8 address, u16 *value)
 	else
 		*value = buf[0];
 
-	PDEBUG(D_USBO, "I2C: Read 0x%x from address 0x%x, status: %d",
+	PDEBUG(D_CONF, "I2C: Read 0x%x from address 0x%x, status: %d",
 	       *value, address, err);
 
 	return (err < 0) ? err : 0;
-- 
cgit v1.2.3


From bf5c562a3e6f7fd4071284caa01f81b031aacc97 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Erik=20Andr=C3=A9n?= <erik.andren@gmail.com>
Date: Mon, 22 Jun 2009 11:25:22 -0300
Subject: V4L/DVB (13005): gspca - stv06xx: Translate swedish comments to
 english
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/stv06xx/stv06xx_st6422.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c b/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c
index 87cb5b9ddfa..c11f06e4ae7 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c
@@ -166,7 +166,7 @@ static int st6422_init(struct sd *sd)
 /* 10 compressed? */
 
 		{ 0x1439, 0x00 },
-/* antiflimmer??  0xa2 ger perfekt bild mot monitor */
+/* anti-noise?  0xa2 gives a perfect image */
 
 		{ 0x143b, 0x05 },
 		{ 0x143c, 0x00 },	/* 0x00-0x01 - ??? */
@@ -197,15 +197,14 @@ static int st6422_init(struct sd *sd)
 		{ 0x1500, 0x50 },	/* 0x00 - 0xFF  0x80 == compr ? */
 
 		{ 0x1501, 0xaf },
-/* high val-> ljus area blir morkare. */
-/* low val -> ljus area blir ljusare. */
+/* high val-> light area gets darker */
+/* low val -> light area gets lighter */
 		{ 0x1502, 0xc2 },
-/* high val-> ljus area blir morkare. */
-/* low val -> ljus area blir ljusare. */
+/* high val-> light area gets darker */
+/* low val -> light area gets lighter */
 		{ 0x1503, 0x45 },
-/* high val-> ljus area blir morkare. */
-/* low val -> ljus area blir ljusare. */
-
+/* high val-> light area gets darker */
+/* low val -> light area gets lighter */
 		{ 0x1505, 0x02 },
 /* 2  : 324x248  80352 bytes */
 /* 7  : 248x162  40176 bytes */
-- 
cgit v1.2.3


From a8ca20b209addeae0d3017c2928048fc7f75ff70 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Erik=20Andr=C3=A9n?= <erik.andren@gmail.com>
Date: Fri, 18 Sep 2009 14:31:03 -0300
Subject: V4L/DVB (13006): gspca - stv06xx: Fix a misindentation
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/stv06xx/stv06xx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.c b/drivers/media/video/gspca/stv06xx/stv06xx.c
index dba6394ae9a..65489d6b0d8 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx.c
+++ b/drivers/media/video/gspca/stv06xx/stv06xx.c
@@ -127,8 +127,8 @@ int stv06xx_write_sensor_bytes(struct sd *sd, const u8 *data, u8 len)
 				      0x04, 0x40, 0x0400, 0, buf,
 				      I2C_BUFFER_LENGTH,
 				      STV06XX_URB_MSG_TIMEOUT);
-				      if (err < 0)
-					return err;
+		if (err < 0)
+			return err;
 	}
 	return stv06xx_write_sensor_finish(sd);
 }
-- 
cgit v1.2.3


From 4fac17b4e73715aefe48f4ada7d4930cd4df6c31 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Erik=20Andr=C3=A9n?= <erik.andren@gmail.com>
Date: Wed, 24 Jun 2009 04:38:02 -0300
Subject: V4L/DVB (13007): gspca - stv06xx-hdcs: Add exposure and gain ctrls to
 hdcs_1020
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c | 30 +++++++++++++++++++++++-
 1 file changed, 29 insertions(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
index e5024c8496e..e180ce61158 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
@@ -74,7 +74,35 @@ static struct v4l2_pix_format hdcs1x00_mode[] = {
 	}
 };
 
-static const struct ctrl hdcs1020_ctrl[] = {};
+static const struct ctrl hdcs1020_ctrl[] = {
+	{
+		{
+			.id		= V4L2_CID_EXPOSURE,
+			.type		= V4L2_CTRL_TYPE_INTEGER,
+			.name		= "exposure",
+			.minimum	= 0x00,
+			.maximum	= 0xffff,
+			.step		= 0x1,
+			.default_value 	= HDCS_DEFAULT_EXPOSURE,
+			.flags         	= V4L2_CTRL_FLAG_SLIDER
+		},
+		.set = hdcs_set_exposure,
+		.get = hdcs_get_exposure
+	}, {
+		{
+			.id		= V4L2_CID_GAIN,
+			.type		= V4L2_CTRL_TYPE_INTEGER,
+			.name		= "gain",
+			.minimum	= 0x00,
+			.maximum	= 0xff,
+			.step		= 0x1,
+			.default_value 	= HDCS_DEFAULT_GAIN,
+			.flags         	= V4L2_CTRL_FLAG_SLIDER
+		},
+		.set = hdcs_set_gain,
+		.get = hdcs_get_gain
+	}
+};
 
 static struct v4l2_pix_format hdcs1020_mode[] = {
 	{
-- 
cgit v1.2.3


From 4711ca823bed12be879f22a930aa9deded9736df Mon Sep 17 00:00:00 2001
From: James Blanford <jhblanford@gmail.com>
Date: Fri, 18 Sep 2009 14:53:09 -0300
Subject: V4L/DVB (13008): gspca - stv06xx-hdcs: Fixup exposure
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Initialize image size before it's used to initialize exposure.
Work around lack of exposure set hardware latch with a sequence of
register writes in a single I2C command packet.

Signed-off-by: James Blanford <jhblanford@gmail.com>
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c | 49 +++++++++++++++---------
 1 file changed, 31 insertions(+), 18 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
index e180ce61158..1655dcd1a5d 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
@@ -280,7 +280,7 @@ static int hdcs_set_exposure(struct gspca_dev *gspca_dev, __s32 val)
 	   within the column processing period */
 	int mnct;
 	int cycles, err;
-	u8 exp[4];
+	u8 exp[14];
 
 	cycles = val * HDCS_CLK_FREQ_MHZ;
 
@@ -316,24 +316,37 @@ static int hdcs_set_exposure(struct gspca_dev *gspca_dev, __s32 val)
 		srowexp = max_srowexp;
 
 	if (IS_1020(sd)) {
-		exp[0] = rowexp & 0xff;
-		exp[1] = rowexp >> 8;
-		exp[2] = (srowexp >> 2) & 0xff;
-		/* this clears exposure error flag */
-		exp[3] = 0x1;
-		err = hdcs_reg_write_seq(sd, HDCS_ROWEXPL, exp, 4);
+		exp[0] = HDCS20_CONTROL;
+		exp[1] = 0x00;		/* Stop streaming */
+		exp[2] = HDCS_ROWEXPL;
+		exp[3] = rowexp & 0xff;
+		exp[4] = HDCS_ROWEXPH;
+		exp[5] = rowexp >> 8;
+		exp[6] = HDCS20_SROWEXP;
+		exp[7] = (srowexp >> 2) & 0xff;
+		exp[8] = HDCS20_ERROR;
+		exp[9] = 0x10;		/* Clear exposure error flag*/
+		exp[10] = HDCS20_CONTROL;
+		exp[11] = 0x04;		/* Restart streaming */
+		err = stv06xx_write_sensor_bytes(sd, exp, 6);
 	} else {
-		exp[0] = rowexp & 0xff;
-		exp[1] = rowexp >> 8;
-		exp[2] = srowexp & 0xff;
-		exp[3] = srowexp >> 8;
-		err = hdcs_reg_write_seq(sd, HDCS_ROWEXPL, exp, 4);
+		exp[0] = HDCS00_CONTROL;
+		exp[1] = 0x00;         /* Stop streaming */
+		exp[2] = HDCS_ROWEXPL;
+		exp[3] = rowexp & 0xff;
+		exp[4] = HDCS_ROWEXPH;
+		exp[5] = rowexp >> 8;
+		exp[6] = HDCS00_SROWEXPL;
+		exp[7] = srowexp & 0xff;
+		exp[8] = HDCS00_SROWEXPH;
+		exp[9] = srowexp >> 8;
+		exp[10] = HDCS_STATUS;
+		exp[11] = 0x10;         /* Clear exposure error flag*/
+		exp[12] = HDCS00_CONTROL;
+		exp[13] = 0x04;         /* Restart streaming */
+		err = stv06xx_write_sensor_bytes(sd, exp, 7);
 		if (err < 0)
 			return err;
-
-		/* clear exposure error flag */
-		err = stv06xx_write_sensor(sd,
-		     HDCS_STATUS, BIT(4));
 	}
 	PDEBUG(D_V4L2, "Writing exposure %d, rowexp %d, srowexp %d",
 	       val, rowexp, srowexp);
@@ -605,11 +618,11 @@ static int hdcs_init(struct sd *sd)
 	if (err < 0)
 		return err;
 
-	err = hdcs_set_exposure(&sd->gspca_dev, HDCS_DEFAULT_EXPOSURE);
+	err = hdcs_set_size(sd, hdcs->array.width, hdcs->array.height);
 	if (err < 0)
 		return err;
 
-	err = hdcs_set_size(sd, hdcs->array.width, hdcs->array.height);
+	err = hdcs_set_exposure(&sd->gspca_dev, HDCS_DEFAULT_EXPOSURE);
 	return err;
 }
 
-- 
cgit v1.2.3


From 35ccf8f8eaa97637ccadbc4b4c6345eb3753d9a9 Mon Sep 17 00:00:00 2001
From: James Blanford <jhblanford@gmail.com>
Date: Fri, 18 Sep 2009 14:56:04 -0300
Subject: V4L/DVB (13009): gspca - stv06xx-hdcs: Reduce exposure range
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Due to rounding and clipping, exposure and gain settings do not map to
unique register values.  Rather than read the registers and report gain
and exposure that may be different than the values that were set, just
cache the latest values that were set and report them.  Reduce exposure
range from 0-65535 to 0-255 so libv4l's autogain doesn't take forever.
Remove vestiges of driver signal processing that is now handled by
libv4l.

Signed-off-by: James Blanford <jhblanford@gmail.com>
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c | 72 +++++++-----------------
 drivers/media/video/gspca/stv06xx/stv06xx_hdcs.h |  2 +-
 2 files changed, 22 insertions(+), 52 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
index 1655dcd1a5d..706e08dc525 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
@@ -37,7 +37,7 @@ static const struct ctrl hdcs1x00_ctrl[] = {
 			.type		= V4L2_CTRL_TYPE_INTEGER,
 			.name		= "exposure",
 			.minimum	= 0x00,
-			.maximum	= 0xffff,
+			.maximum	= 0xff,
 			.step		= 0x1,
 			.default_value 	= HDCS_DEFAULT_EXPOSURE,
 			.flags         	= V4L2_CTRL_FLAG_SLIDER
@@ -148,6 +148,7 @@ struct hdcs {
 	} exp;
 
 	int psmp;
+	u8 exp_cache, gain_cache;
 };
 
 static int hdcs_reg_write_seq(struct sd *sd, u8 reg, u8 *vals, u8 len)
@@ -233,34 +234,8 @@ static int hdcs_get_exposure(struct gspca_dev *gspca_dev, __s32 *val)
 	struct sd *sd = (struct sd *) gspca_dev;
 	struct hdcs *hdcs = sd->sensor_priv;
 
-	/* Column time period */
-	int ct;
-	/* Column processing period */
-	int cp;
-	/* Row processing period */
-	int rp;
-	int cycles;
-	int err;
-	int rowexp;
-	u16 data[2];
-
-	err = stv06xx_read_sensor(sd, HDCS_ROWEXPL, &data[0]);
-	if (err < 0)
-		return err;
-
-	err = stv06xx_read_sensor(sd, HDCS_ROWEXPH, &data[1]);
-	if (err < 0)
-		return err;
-
-	rowexp = (data[1] << 8) | data[0];
+	*val = hdcs->exp_cache;
 
-	ct = hdcs->exp.cto + hdcs->psmp + (HDCS_ADC_START_SIG_DUR + 2);
-	cp = hdcs->exp.cto + (hdcs->w * ct / 2);
-	rp = hdcs->exp.rs + cp;
-
-	cycles = rp * rowexp;
-	*val = cycles / HDCS_CLK_FREQ_MHZ;
-	PDEBUG(D_V4L2, "Read exposure %d", *val);
 	return 0;
 }
 
@@ -282,7 +257,10 @@ static int hdcs_set_exposure(struct gspca_dev *gspca_dev, __s32 val)
 	int cycles, err;
 	u8 exp[14];
 
-	cycles = val * HDCS_CLK_FREQ_MHZ;
+	val &= 0xff;
+	hdcs->exp_cache = val;
+
+	cycles = val * HDCS_CLK_FREQ_MHZ * 257;
 
 	ct = hdcs->exp.cto + hdcs->psmp + (HDCS_ADC_START_SIG_DUR + 2);
 	cp = hdcs->exp.cto + (hdcs->w * ct / 2);
@@ -353,49 +331,42 @@ static int hdcs_set_exposure(struct gspca_dev *gspca_dev, __s32 val)
 	return err;
 }
 
-static int hdcs_set_gains(struct sd *sd, u8 r, u8 g, u8 b)
+static int hdcs_set_gains(struct sd *sd, u8 g)
 {
+	struct hdcs *hdcs = sd->sensor_priv;
+	int err;
 	u8 gains[4];
 
+	hdcs->gain_cache = g;
+
 	/* the voltage gain Av = (1 + 19 * val / 127) * (1 + bit7) */
-	if (r > 127)
-		r = 0x80 | (r / 2);
 	if (g > 127)
 		g = 0x80 | (g / 2);
-	if (b > 127)
-		b = 0x80 | (b / 2);
 
 	gains[0] = g;
-	gains[1] = r;
-	gains[2] = b;
+	gains[1] = g;
+	gains[2] = g;
 	gains[3] = g;
 
-	return hdcs_reg_write_seq(sd, HDCS_ERECPGA, gains, 4);
+	err = hdcs_reg_write_seq(sd, HDCS_ERECPGA, gains, 4);
+		return err;
 }
 
 static int hdcs_get_gain(struct gspca_dev *gspca_dev, __s32 *val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	int err;
-	u16 data;
+	struct hdcs *hdcs = sd->sensor_priv;
 
-	err = stv06xx_read_sensor(sd, HDCS_ERECPGA, &data);
+	*val = hdcs->gain_cache;
 
-	/* Bit 7 doubles the gain */
-	if (data & 0x80)
-		*val = (data & 0x7f) * 2;
-	else
-		*val = data;
-
-	PDEBUG(D_V4L2, "Read gain %d", *val);
-	return err;
+	return 0;
 }
 
 static int hdcs_set_gain(struct gspca_dev *gspca_dev, __s32 val)
 {
 	PDEBUG(D_V4L2, "Writing gain %d", val);
 	return hdcs_set_gains((struct sd *) gspca_dev,
-			       val & 0xff, val & 0xff, val & 0xff);
+			       val & 0xff);
 }
 
 static int hdcs_set_size(struct sd *sd,
@@ -613,8 +584,7 @@ static int hdcs_init(struct sd *sd)
 	if (err < 0)
 		return err;
 
-	err = hdcs_set_gains(sd, HDCS_DEFAULT_GAIN, HDCS_DEFAULT_GAIN,
-			     HDCS_DEFAULT_GAIN);
+	err = hdcs_set_gains(sd, HDCS_DEFAULT_GAIN);
 	if (err < 0)
 		return err;
 
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.h b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.h
index 412f06cf3d5..37b31c99d95 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.h
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.h
@@ -124,7 +124,7 @@
 #define HDCS_RUN_ENABLE		(1 << 2)
 #define HDCS_SLEEP_MODE		(1 << 1)
 
-#define HDCS_DEFAULT_EXPOSURE	5000
+#define HDCS_DEFAULT_EXPOSURE	48
 #define HDCS_DEFAULT_GAIN	128
 
 static int hdcs_probe_1x00(struct sd *sd);
-- 
cgit v1.2.3


From c6e56cd344da17134f3d57247d52eaf640107087 Mon Sep 17 00:00:00 2001
From: Dmitry Belimov <d.belimov@gmail.com>
Date: Thu, 17 Sep 2009 23:39:37 -0300
Subject: V4L/DVB (13011): Change tuner type of BeholdTV cards

Change tuner type to correct for BeholdTV cards with FM1216MK5.

Cc: Hermann Pitton <hermann-pitton@arcor.de>
Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7134/saa7134-cards.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index 9210d3ea694..71145bff94f 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -4164,7 +4164,7 @@ struct saa7134_board saa7134_boards[] = {
 		/*Dmitry Belimov <d.belimov@gmail.com> */
 		.name           = "Beholder BeholdTV 505 RDS",
 		.audio_clock    = 0x00200000,
-		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3, /* FIXME to MK5 */
+		.tuner_type     = TUNER_PHILIPS_FM1216MK5,
 		.radio_type     = UNSET,
 		.tuner_addr     = ADDR_UNSET,
 		.radio_addr     = ADDR_UNSET,
@@ -4229,7 +4229,7 @@ struct saa7134_board saa7134_boards[] = {
 		/*Dmitry Belimov <d.belimov@gmail.com> */
 		.name           = "Beholder BeholdTV 507 RDS",
 		.audio_clock    = 0x00187de7,
-		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3, /* FIXME to MK5 */
+		.tuner_type     = TUNER_PHILIPS_FM1216MK5,
 		.radio_type     = UNSET,
 		.tuner_addr     = ADDR_UNSET,
 		.radio_addr     = ADDR_UNSET,
@@ -4380,7 +4380,7 @@ struct saa7134_board saa7134_boards[] = {
 		/* Andrey Melnikoff <temnota@kmv.ru> */
 		.name           = "Beholder BeholdTV 607 FM",
 		.audio_clock    = 0x00187de7,
-		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3, /* FIXME to MK5 */
+		.tuner_type     = TUNER_PHILIPS_FM1216MK5,
 		.radio_type     = UNSET,
 		.tuner_addr     = ADDR_UNSET,
 		.radio_addr     = ADDR_UNSET,
@@ -4408,7 +4408,7 @@ struct saa7134_board saa7134_boards[] = {
 		/* Andrey Melnikoff <temnota@kmv.ru> */
 		.name           = "Beholder BeholdTV 609 FM",
 		.audio_clock    = 0x00187de7,
-		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3, /* FIXME to MK5 */
+		.tuner_type     = TUNER_PHILIPS_FM1216MK5,
 		.radio_type     = UNSET,
 		.tuner_addr     = ADDR_UNSET,
 		.radio_addr     = ADDR_UNSET,
@@ -4494,7 +4494,7 @@ struct saa7134_board saa7134_boards[] = {
 		/* Andrey Melnikoff <temnota@kmv.ru> */
 		.name           = "Beholder BeholdTV 607 RDS",
 		.audio_clock    = 0x00187de7,
-		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3, /* FIXME to MK5 */
+		.tuner_type     = TUNER_PHILIPS_FM1216MK5,
 		.radio_type     = UNSET,
 		.tuner_addr     = ADDR_UNSET,
 		.radio_addr     = ADDR_UNSET,
@@ -4523,7 +4523,7 @@ struct saa7134_board saa7134_boards[] = {
 		/* Andrey Melnikoff <temnota@kmv.ru> */
 		.name           = "Beholder BeholdTV 609 RDS",
 		.audio_clock    = 0x00187de7,
-		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3, /* FIXME to MK5 */
+		.tuner_type     = TUNER_PHILIPS_FM1216MK5,
 		.radio_type     = UNSET,
 		.tuner_addr     = ADDR_UNSET,
 		.radio_addr     = ADDR_UNSET,
@@ -4630,7 +4630,7 @@ struct saa7134_board saa7134_boards[] = {
 		/* Alexey Osipov <lion-simba@pridelands.ru> */
 		.name           = "Beholder BeholdTV M6 Extra",
 		.audio_clock    = 0x00187de7,
-		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3, /* FIXME to MK5 */
+		.tuner_type     = TUNER_PHILIPS_FM1216MK5,
 		.radio_type     = UNSET,
 		.tuner_addr     = ADDR_UNSET,
 		.radio_addr     = ADDR_UNSET,
-- 
cgit v1.2.3


From d2be76437c20161a31460306e555bb546e30dfc7 Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Thu, 17 Sep 2009 23:44:01 -0300
Subject: V4L/DVB (13012): uvc: introduce missing kfree

Move the kzalloc and associated test after the stream/query test, to avoid
the need to free the allocated if the stream/query test fails.

The semantic match that finds the problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,f1,l;
position p1,p2;
expression *ptr != NULL;
@@

x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
<... when != x
     when != if (...) { <+...x...+> }
(
x->f1 = E
|
 (x->f1 == NULL || ...)
|
 f(...,x->f1,...)
)
...>
(
 return \(0\|<+...x...+>\|ptr\);
|
 return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/uvc/uvc_video.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'drivers/media')

diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c
index 5b757f32d99..f960e8ea4f1 100644
--- a/drivers/media/video/uvc/uvc_video.c
+++ b/drivers/media/video/uvc/uvc_video.c
@@ -124,13 +124,14 @@ static int uvc_get_video_ctrl(struct uvc_streaming *stream,
 	int ret;
 
 	size = stream->dev->uvc_version >= 0x0110 ? 34 : 26;
+	if ((stream->dev->quirks & UVC_QUIRK_PROBE_DEF) &&
+			query == UVC_GET_DEF)
+		return -EIO;
+
 	data = kmalloc(size, GFP_KERNEL);
 	if (data == NULL)
 		return -ENOMEM;
 
-	if ((stream->dev->quirks & UVC_QUIRK_PROBE_DEF) && query == UVC_GET_DEF)
-		return -EIO;
-
 	ret = __uvc_query_ctrl(stream->dev, query, 0, stream->intfnum,
 		probe ? UVC_VS_PROBE_CONTROL : UVC_VS_COMMIT_CONTROL, data,
 		size, UVC_CTRL_STREAMING_TIMEOUT);
-- 
cgit v1.2.3


From 7a254f468f699a5870143dcabf279eae67339029 Mon Sep 17 00:00:00 2001
From: "Matti J. Aaltonen" <matti.j.aaltonen@nokia.com>
Date: Thu, 17 Sep 2009 23:46:18 -0300
Subject: V4L/DVB (13013): FM TX: si4713: Kconfig: Fixed two typos.

Fixed two typos.

Signed-off-by: Matti J. Aaltonen <matti.j.aaltonen@nokia.com>
Acked-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/radio/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index 25a36ad60c5..a87a477c87f 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -346,7 +346,7 @@ config RADIO_SI4713
 	---help---
 	  Say Y here if you want support to Si4713 FM Radio Transmitter.
 	  This device can transmit audio through FM. It can transmit
-	  EDS and EBDS signals as well. This module is the v4l2 radio
+	  RDS and RBDS signals as well. This module is the v4l2 radio
 	  interface for the i2c driver of this device.
 
 	  To compile this driver as a module, choose M here: the
-- 
cgit v1.2.3


From 34e383dd13edf402e87bf0a87f4a19b193b4bd7a Mon Sep 17 00:00:00 2001
From: Vladimir Geroy <geroin22@yandex.ru>
Date: Fri, 18 Sep 2009 18:55:47 -0300
Subject: V4L/DVB (13014): Add support for Compro VideoMate E800 (DVB-T part
 only)

Adding Compro VideoMate E800 (DVB-T part only)

Cc: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Vladimir Geroy <geroin22@yandex.ru>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx23885/cx23885-cards.c | 12 ++++++++++++
 drivers/media/video/cx23885/cx23885-dvb.c   |  1 +
 drivers/media/video/cx23885/cx23885.h       |  1 +
 3 files changed, 14 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index 02ba4aec7d9..bfdf79f1033 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -210,6 +210,10 @@ struct cx23885_board cx23885_boards[] = {
 		.portb		= CX23885_MPEG_ENCODER,
 		.portc		= CX23885_MPEG_DVB,
 	},
+	[CX23885_BOARD_COMPRO_VIDEOMATE_E800] = {
+		.name		= "Compro VideoMate E800",
+		.portc		= CX23885_MPEG_DVB,
+	},
 };
 const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
 
@@ -341,6 +345,10 @@ struct cx23885_subid cx23885_subids[] = {
 		.subvendor = 0x0070,
 		.subdevice = 0x8541,
 		.card      = CX23885_BOARD_HAUPPAUGE_HVR1850,
+	}, {
+		.subvendor = 0x1858,
+		.subdevice = 0xe800,
+		.card      = CX23885_BOARD_COMPRO_VIDEOMATE_E800,
 	},
 };
 const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -536,6 +544,7 @@ int cx23885_tuner_callback(void *priv, int component, int command, int arg)
 	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
 	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
 	case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
+	case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
 		/* Tuner Reset Command */
 		bitmask = 0x04;
 		break;
@@ -687,6 +696,7 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
 		break;
 	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
 	case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
+	case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
 		/* GPIO-2  xc3028 tuner reset */
 
 		/* The following GPIO's are on the internal AVCore (cx25840) */
@@ -911,6 +921,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR1255:
 	case CX23885_BOARD_HAUPPAUGE_HVR1210:
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
+	case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
 	default:
 		ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
 		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
@@ -927,6 +938,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
 	case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
 	case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
+	case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
 		dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
 				&dev->i2c_bus[2].i2c_adap,
 				"cx25840", "cx25840", 0x88 >> 1, NULL);
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index 2519b27a370..45e13ee66dc 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -747,6 +747,7 @@ static int dvb_register(struct cx23885_tsport *port)
 	}
 	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
 	case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
+	case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
 		i2c_bus = &dev->i2c_bus[0];
 
 		fe0->dvb.frontend = dvb_attach(zl10353_attach,
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index bee689104a2..cc7a165561f 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -78,6 +78,7 @@
 #define CX23885_BOARD_MYGICA_X8506             22
 #define CX23885_BOARD_MAGICPRO_PROHDTVE2       23
 #define CX23885_BOARD_HAUPPAUGE_HVR1850        24
+#define CX23885_BOARD_COMPRO_VIDEOMATE_E800    25
 
 #define GPIO_0 0x00000001
 #define GPIO_1 0x00000002
-- 
cgit v1.2.3


From 1601fb14980b1295e00087460d57256a87f334bf Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Fri, 18 Sep 2009 20:09:52 -0300
Subject: V4L/DVB (13015): kmalloc failure ignored in m920x_firmware_download()

Prevent NULL dereference if kmalloc() fails.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/dvb-usb/m920x.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/dvb-usb/m920x.c b/drivers/media/dvb/dvb-usb/m920x.c
index aec7a1943b6..ef9b7bed13f 100644
--- a/drivers/media/dvb/dvb-usb/m920x.c
+++ b/drivers/media/dvb/dvb-usb/m920x.c
@@ -337,6 +337,8 @@ static int m920x_firmware_download(struct usb_device *udev, const struct firmwar
 	int i, pass, ret = 0;
 
 	buff = kmalloc(65536, GFP_KERNEL);
+	if (buff == NULL)
+		return -ENOMEM;
 
 	if ((ret = m920x_read(udev, M9206_FILTER, 0x0, 0x8000, read, 4)) != 0)
 		goto done;
-- 
cgit v1.2.3


From 8d04df4997b530d978d48a66655a99714af197ca Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Fri, 18 Sep 2009 20:26:53 -0300
Subject: V4L/DVB (13016): kmalloc failure ignored in lgdt3304_attach() and
 s921_attach()

Prevent NULL dereference if kmalloc() fails.

Cc: Markus Rechberger <mrechberger@sundtek.de>
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/frontends/lgdt3304.c    | 2 ++
 drivers/media/dvb/frontends/s921_module.c | 2 ++
 2 files changed, 4 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/frontends/lgdt3304.c b/drivers/media/dvb/frontends/lgdt3304.c
index eb72a9866c9..e334b5d4e57 100644
--- a/drivers/media/dvb/frontends/lgdt3304.c
+++ b/drivers/media/dvb/frontends/lgdt3304.c
@@ -363,6 +363,8 @@ struct dvb_frontend* lgdt3304_attach(const struct lgdt3304_config *config,
 
 	struct lgdt3304_state *state;
 	state = kzalloc(sizeof(struct lgdt3304_state), GFP_KERNEL);
+	if (state == NULL)
+		return NULL;
 	state->addr = config->i2c_address;
 	state->i2c = i2c;
 
diff --git a/drivers/media/dvb/frontends/s921_module.c b/drivers/media/dvb/frontends/s921_module.c
index 3f5a0e1dfdf..3156b64cfc9 100644
--- a/drivers/media/dvb/frontends/s921_module.c
+++ b/drivers/media/dvb/frontends/s921_module.c
@@ -169,6 +169,8 @@ struct dvb_frontend* s921_attach(const struct s921_config *config,
 
 	struct s921_state *state;
 	state = kzalloc(sizeof(struct s921_state), GFP_KERNEL);
+	if (state == NULL)
+		return NULL;
 
 	state->addr = config->i2c_address;
 	state->i2c = i2c;
-- 
cgit v1.2.3


From d8370f7eff14ef646ba4a81eb9642800518a7324 Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Fri, 18 Sep 2009 20:33:27 -0300
Subject: V4L/DVB (13017): gspca: kmalloc failure ignored in sd_start()

Prevent NULL dereference if kmalloc() fails.

Cc: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/jeilinj.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/video/gspca/jeilinj.c b/drivers/media/video/gspca/jeilinj.c
index dbfa3ed6e8e..a11c97ebeb0 100644
--- a/drivers/media/video/gspca/jeilinj.c
+++ b/drivers/media/video/gspca/jeilinj.c
@@ -312,6 +312,8 @@ static int sd_start(struct gspca_dev *gspca_dev)
 
 	/* create the JPEG header */
 	dev->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+	if (dev->jpeg_hdr == NULL)
+		return -ENOMEM;
 	jpeg_define(dev->jpeg_hdr, gspca_dev->height, gspca_dev->width,
 			0x21);          /* JPEG 422 */
 	jpeg_set_qual(dev->jpeg_hdr, dev->quality);
-- 
cgit v1.2.3


From 40d2951758d788a0375d27062caf9cc75de735a9 Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Fri, 18 Sep 2009 21:03:34 -0300
Subject: V4L/DVB (13018): kzalloc failure ignored in au8522_probe()

Prevent NULL dereference if kzalloc() fails.

Cc: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/frontends/au8522_decoder.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/frontends/au8522_decoder.c b/drivers/media/dvb/frontends/au8522_decoder.c
index 9e9a75576a1..74981ee923c 100644
--- a/drivers/media/dvb/frontends/au8522_decoder.c
+++ b/drivers/media/dvb/frontends/au8522_decoder.c
@@ -792,6 +792,11 @@ static int au8522_probe(struct i2c_client *client,
 	}
 
 	demod_config = kzalloc(sizeof(struct au8522_config), GFP_KERNEL);
+	if (demod_config == NULL) {
+		if (instance == 1)
+			kfree(state);
+		return -ENOMEM;
+	}
 	demod_config->demod_address = 0x8e >> 1;
 
 	state->config = demod_config;
-- 
cgit v1.2.3


From 6789cb5230f8b06271b6a89ace20449af14be303 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Richard=20R=C3=B6jfors?=
 <richard.rojfors.ext@mocean-labs.com>
Date: Fri, 18 Sep 2009 21:17:20 -0300
Subject: V4L/DVB (13019): video: initial support for ADV7180
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This is an initial driver for Analog Devices ADV7180 Video Decoder.
So far it only supports query standard.

[akpm@linux-foundation.org: remove unneeded cast]
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Richard Röjfors <richard.rojfors.ext@mocean-labs.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/Kconfig   |   9 ++
 drivers/media/video/Makefile  |   1 +
 drivers/media/video/adv7180.c | 202 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 212 insertions(+)
 create mode 100644 drivers/media/video/adv7180.c

(limited to 'drivers/media')

diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index dc71eaea6af..e6186b338a1 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -265,6 +265,15 @@ config VIDEO_SAA6588
 
 comment "Video decoders"
 
+config VIDEO_ADV7180
+	tristate "Analog Devices ADV7180 decoder"
+	depends on VIDEO_V4L2 && I2C
+	---help---
+	  Support for the Analog Devices ADV7180 video decoder.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called adv7180.
+
 config VIDEO_BT819
 	tristate "BT819A VideoStream decoder"
 	depends on VIDEO_V4L2 && I2C
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 040bc049200..e541932a789 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -45,6 +45,7 @@ obj-$(CONFIG_VIDEO_SAA7185) += saa7185.o
 obj-$(CONFIG_VIDEO_SAA7191) += saa7191.o
 obj-$(CONFIG_VIDEO_ADV7170) += adv7170.o
 obj-$(CONFIG_VIDEO_ADV7175) += adv7175.o
+obj-$(CONFIG_VIDEO_ADV7180) += adv7180.o
 obj-$(CONFIG_VIDEO_ADV7343) += adv7343.o
 obj-$(CONFIG_VIDEO_VPX3220) += vpx3220.o
 obj-$(CONFIG_VIDEO_BT819) += bt819.o
diff --git a/drivers/media/video/adv7180.c b/drivers/media/video/adv7180.c
new file mode 100644
index 00000000000..1b3cbd02a7f
--- /dev/null
+++ b/drivers/media/video/adv7180.c
@@ -0,0 +1,202 @@
+/*
+ * adv7180.c Analog Devices ADV7180 video decoder driver
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/i2c-id.h>
+#include <media/v4l2-ioctl.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-chip-ident.h>
+
+#define DRIVER_NAME "adv7180"
+
+#define ADV7180_INPUT_CONTROL_REG	0x00
+#define ADV7180_INPUT_CONTROL_PAL_BG_NTSC_J_SECAM	0x00
+#define ADV7180_AUTODETECT_ENABLE_REG	0x07
+#define ADV7180_AUTODETECT_DEFAULT	0x7f
+
+
+#define ADV7180_STATUS1_REG 0x10
+#define ADV7180_STATUS1_AUTOD_MASK 0x70
+#define ADV7180_STATUS1_AUTOD_NTSM_M_J	0x00
+#define ADV7180_STATUS1_AUTOD_NTSC_4_43 0x10
+#define ADV7180_STATUS1_AUTOD_PAL_M	0x20
+#define ADV7180_STATUS1_AUTOD_PAL_60	0x30
+#define ADV7180_STATUS1_AUTOD_PAL_B_G	0x40
+#define ADV7180_STATUS1_AUTOD_SECAM	0x50
+#define ADV7180_STATUS1_AUTOD_PAL_COMB	0x60
+#define ADV7180_STATUS1_AUTOD_SECAM_525	0x70
+
+#define ADV7180_IDENT_REG 0x11
+#define ADV7180_ID_7180 0x18
+
+
+struct adv7180_state {
+	struct v4l2_subdev sd;
+};
+
+static v4l2_std_id determine_norm(struct i2c_client *client)
+{
+	u8 status1 = i2c_smbus_read_byte_data(client, ADV7180_STATUS1_REG);
+
+	switch (status1 & ADV7180_STATUS1_AUTOD_MASK) {
+	case ADV7180_STATUS1_AUTOD_NTSM_M_J:
+		return V4L2_STD_NTSC_M_JP;
+	case ADV7180_STATUS1_AUTOD_NTSC_4_43:
+		return V4L2_STD_NTSC_443;
+	case ADV7180_STATUS1_AUTOD_PAL_M:
+		return V4L2_STD_PAL_M;
+	case ADV7180_STATUS1_AUTOD_PAL_60:
+		return V4L2_STD_PAL_60;
+	case ADV7180_STATUS1_AUTOD_PAL_B_G:
+		return V4L2_STD_PAL;
+	case ADV7180_STATUS1_AUTOD_SECAM:
+		return V4L2_STD_SECAM;
+	case ADV7180_STATUS1_AUTOD_PAL_COMB:
+		return V4L2_STD_PAL_Nc | V4L2_STD_PAL_N;
+	case ADV7180_STATUS1_AUTOD_SECAM_525:
+		return V4L2_STD_SECAM;
+	default:
+		return V4L2_STD_UNKNOWN;
+	}
+}
+
+static inline struct adv7180_state *to_state(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct adv7180_state, sd);
+}
+
+static int adv7180_querystd(struct v4l2_subdev *sd, v4l2_std_id *std)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+	*std = determine_norm(client);
+	return 0;
+}
+
+static int adv7180_g_chip_ident(struct v4l2_subdev *sd,
+	struct v4l2_dbg_chip_ident *chip)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+	return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_ADV7180, 0);
+}
+
+static const struct v4l2_subdev_video_ops adv7180_video_ops = {
+	.querystd = adv7180_querystd,
+};
+
+static const struct v4l2_subdev_core_ops adv7180_core_ops = {
+	.g_chip_ident = adv7180_g_chip_ident,
+};
+
+static const struct v4l2_subdev_ops adv7180_ops = {
+	.core = &adv7180_core_ops,
+	.video = &adv7180_video_ops,
+};
+
+/*
+ * Generic i2c probe
+ * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1'
+ */
+
+static int adv7180_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct adv7180_state *state;
+	struct v4l2_subdev *sd;
+	int ret;
+
+	/* Check if the adapter supports the needed features */
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -EIO;
+
+	v4l_info(client, "chip found @ 0x%02x (%s)\n",
+			client->addr << 1, client->adapter->name);
+
+	state = kzalloc(sizeof(struct adv7180_state), GFP_KERNEL);
+	if (state == NULL)
+		return -ENOMEM;
+	sd = &state->sd;
+	v4l2_i2c_subdev_init(sd, client, &adv7180_ops);
+
+	/* Initialize adv7180 */
+	/* enable autodetection */
+	ret = i2c_smbus_write_byte_data(client, ADV7180_INPUT_CONTROL_REG,
+		ADV7180_INPUT_CONTROL_PAL_BG_NTSC_J_SECAM);
+	if (ret > 0)
+		ret = i2c_smbus_write_byte_data(client,
+			ADV7180_AUTODETECT_ENABLE_REG,
+			ADV7180_AUTODETECT_DEFAULT);
+	if (ret < 0) {
+		printk(KERN_ERR DRIVER_NAME
+			": Failed to communicate to chip: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int adv7180_remove(struct i2c_client *client)
+{
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+
+	v4l2_device_unregister_subdev(sd);
+	kfree(to_state(sd));
+	return 0;
+}
+
+static const struct i2c_device_id adv7180_id[] = {
+	{DRIVER_NAME, 0},
+	{},
+};
+
+MODULE_DEVICE_TABLE(i2c, adv7180_id);
+
+static struct i2c_driver adv7180_driver = {
+	.driver = {
+		.owner	= THIS_MODULE,
+		.name	= DRIVER_NAME,
+	},
+	.probe		= adv7180_probe,
+	.remove		= adv7180_remove,
+	.id_table	= adv7180_id,
+};
+
+static __init int adv7180_init(void)
+{
+	return i2c_add_driver(&adv7180_driver);
+}
+
+static __exit void adv7180_exit(void)
+{
+	i2c_del_driver(&adv7180_driver);
+}
+
+module_init(adv7180_init);
+module_exit(adv7180_exit);
+
+MODULE_DESCRIPTION("Analog Devices ADV7180 video decoder driver");
+MODULE_AUTHOR("Mocean Laboratories");
+MODULE_LICENSE("GPL v2");
+
-- 
cgit v1.2.3


From 2ff88bc34314ace6035b5aecd36e786342e64758 Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Fri, 18 Sep 2009 23:33:47 -0300
Subject: V4L/DVB (13029): radio-si4713: remove #include <linux/version.h>

Remove #include <linux/version.h>

Cc: Eduardo Valentin <eduardo.valentin@nokia.com>
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/radio/radio-si4713.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/radio/radio-si4713.c b/drivers/media/radio/radio-si4713.c
index 65c14b70458..170bbe55478 100644
--- a/drivers/media/radio/radio-si4713.c
+++ b/drivers/media/radio/radio-si4713.c
@@ -24,7 +24,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
-#include <linux/version.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
 #include <linux/videodev2.h>
-- 
cgit v1.2.3


From 84d6ae431f315e8973aac3c3fe1d550fc9240ef3 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Sat, 19 Sep 2009 01:01:26 -0300
Subject: V4L/DVB (13033): pt1: Don't use a deprecated DMA_BIT_MASK macro
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

drivers/media/dvb/pt1/pt1.c: In function ‘pt1_probe’:
drivers/media/dvb/pt1/pt1.c:915: warning: ‘DMA_nnBIT_MASK’ is deprecated

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/pt1/pt1.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/media')

diff --git a/drivers/media/dvb/pt1/pt1.c b/drivers/media/dvb/pt1/pt1.c
index ef0f7d235e2..8ffbcecad93 100644
--- a/drivers/media/dvb/pt1/pt1.c
+++ b/drivers/media/dvb/pt1/pt1.c
@@ -912,7 +912,7 @@ pt1_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (ret < 0)
 		goto err;
 
-	ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+	ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
 	if (ret < 0)
 		goto err_pci_disable_device;
 
-- 
cgit v1.2.3