From 5a9c47b1344b514758d5d7f193c672850390cc36 Mon Sep 17 00:00:00 2001 From: Eric Moore Date: Mon, 29 Jan 2007 09:43:17 -0700 Subject: [SCSI] fusion - move SPI API over to mptspi.c Move some functions that only apply to the mptspi module over from mptscsih.c Signed-off-by: Eric Moore Signed-off-by: James Bottomley --- drivers/message/fusion/mptspi.c | 268 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 267 insertions(+), 1 deletion(-) (limited to 'drivers/message/fusion/mptspi.c') diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c index aec0c2fe221..4896d7cc681 100644 --- a/drivers/message/fusion/mptspi.c +++ b/drivers/message/fusion/mptspi.c @@ -95,6 +95,269 @@ static int mptspiDoneCtx = -1; static int mptspiTaskCtx = -1; static int mptspiInternalCtx = -1; /* Used only for internal commands */ +/** + * mptspi_setTargetNegoParms - Update the target negotiation + * parameters based on the the Inquiry data, adapter capabilities, + * and NVRAM settings + * + * @hd: Pointer to a SCSI Host Structure + * @vtarget: per target private data + * @sdev: SCSI device + * + **/ +static void +mptspi_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget *target, + struct scsi_device *sdev) +{ + SpiCfgData *pspi_data = &hd->ioc->spi_data; + int id = (int) target->id; + int nvram; + u8 width = MPT_NARROW; + u8 factor = MPT_ASYNC; + u8 offset = 0; + u8 nfactor; + u8 noQas = 1; + + target->negoFlags = pspi_data->noQas; + + if (sdev->scsi_level < SCSI_2) { + width = 0; + factor = MPT_ULTRA2; + offset = pspi_data->maxSyncOffset; + target->tflags &= ~MPT_TARGET_FLAGS_Q_YES; + } else { + if (scsi_device_wide(sdev)) + width = 1; + + if (scsi_device_sync(sdev)) { + factor = pspi_data->minSyncFactor; + if (!scsi_device_dt(sdev)) + factor = MPT_ULTRA2; + else { + if (!scsi_device_ius(sdev) && + !scsi_device_qas(sdev)) + factor = MPT_ULTRA160; + else { + factor = MPT_ULTRA320; + if (scsi_device_qas(sdev)) { + ddvprintk((KERN_INFO "Enabling QAS due to byte56=%02x on id=%d!\n", scsi_device_qas(sdev), id)); + noQas = 0; + } + if (sdev->type == TYPE_TAPE && + scsi_device_ius(sdev)) + target->negoFlags |= MPT_TAPE_NEGO_IDP; + } + } + offset = pspi_data->maxSyncOffset; + + /* If RAID, never disable QAS + * else if non RAID, do not disable + * QAS if bit 1 is set + * bit 1 QAS support, non-raid only + * bit 0 IU support + */ + if (target->raidVolume == 1) + noQas = 0; + } else { + factor = MPT_ASYNC; + offset = 0; + } + } + + if (!sdev->tagged_supported) + target->tflags &= ~MPT_TARGET_FLAGS_Q_YES; + + /* Update tflags based on NVRAM settings. (SCSI only) + */ + if (pspi_data->nvram && (pspi_data->nvram[id] != MPT_HOST_NVRAM_INVALID)) { + nvram = pspi_data->nvram[id]; + nfactor = (nvram & MPT_NVRAM_SYNC_MASK) >> 8; + + if (width) + width = nvram & MPT_NVRAM_WIDE_DISABLE ? 0 : 1; + + if (offset > 0) { + /* Ensure factor is set to the + * maximum of: adapter, nvram, inquiry + */ + if (nfactor) { + if (nfactor < pspi_data->minSyncFactor ) + nfactor = pspi_data->minSyncFactor; + + factor = max(factor, nfactor); + if (factor == MPT_ASYNC) + offset = 0; + } else { + offset = 0; + factor = MPT_ASYNC; + } + } else { + factor = MPT_ASYNC; + } + } + + /* Make sure data is consistent + */ + if ((!width) && (factor < MPT_ULTRA2)) + factor = MPT_ULTRA2; + + /* Save the data to the target structure. + */ + target->minSyncFactor = factor; + target->maxOffset = offset; + target->maxWidth = width; + + target->tflags |= MPT_TARGET_FLAGS_VALID_NEGO; + + /* Disable unused features. + */ + if (!width) + target->negoFlags |= MPT_TARGET_NO_NEGO_WIDE; + + if (!offset) + target->negoFlags |= MPT_TARGET_NO_NEGO_SYNC; + + if ( factor > MPT_ULTRA320 ) + noQas = 0; + + if (noQas && (pspi_data->noQas == 0)) { + pspi_data->noQas |= MPT_TARGET_NO_NEGO_QAS; + target->negoFlags |= MPT_TARGET_NO_NEGO_QAS; + + /* Disable QAS in a mixed configuration case + */ + + ddvprintk((KERN_INFO "Disabling QAS due to noQas=%02x on id=%d!\n", noQas, id)); + } +} + +/** + * mptspi_writeIOCPage4 - write IOC Page 4 + * @hd: Pointer to a SCSI Host Structure + * @channel: + * @id: write IOC Page4 for this ID & Bus + * + * Return: -EAGAIN if unable to obtain a Message Frame + * or 0 if success. + * + * Remark: We do not wait for a return, write pages sequentially. + **/ +static int +mptspi_writeIOCPage4(MPT_SCSI_HOST *hd, u8 channel , u8 id) +{ + MPT_ADAPTER *ioc = hd->ioc; + Config_t *pReq; + IOCPage4_t *IOCPage4Ptr; + MPT_FRAME_HDR *mf; + dma_addr_t dataDma; + u16 req_idx; + u32 frameOffset; + u32 flagsLength; + int ii; + + /* Get a MF for this command. + */ + if ((mf = mpt_get_msg_frame(ioc->DoneCtx, ioc)) == NULL) { + dfailprintk((MYIOC_s_WARN_FMT "writeIOCPage4 : no msg frames!\n", + ioc->name)); + return -EAGAIN; + } + + /* Set the request and the data pointers. + * Place data at end of MF. + */ + pReq = (Config_t *)mf; + + req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx); + frameOffset = ioc->req_sz - sizeof(IOCPage4_t); + + /* Complete the request frame (same for all requests). + */ + pReq->Action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT; + pReq->Reserved = 0; + pReq->ChainOffset = 0; + pReq->Function = MPI_FUNCTION_CONFIG; + pReq->ExtPageLength = 0; + pReq->ExtPageType = 0; + pReq->MsgFlags = 0; + for (ii=0; ii < 8; ii++) { + pReq->Reserved2[ii] = 0; + } + + IOCPage4Ptr = ioc->spi_data.pIocPg4; + dataDma = ioc->spi_data.IocPg4_dma; + ii = IOCPage4Ptr->ActiveSEP++; + IOCPage4Ptr->SEP[ii].SEPTargetID = id; + IOCPage4Ptr->SEP[ii].SEPBus = channel; + pReq->Header = IOCPage4Ptr->Header; + pReq->PageAddress = cpu_to_le32(id | (channel << 8 )); + + /* Add a SGE to the config request. + */ + flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE | + (IOCPage4Ptr->Header.PageLength + ii) * 4; + + mpt_add_sge((char *)&pReq->PageBufferSGE, flagsLength, dataDma); + + ddvprintk((MYIOC_s_INFO_FMT + "writeIOCPage4: MaxSEP=%d ActiveSEP=%d id=%d bus=%d\n", + ioc->name, IOCPage4Ptr->MaxSEP, IOCPage4Ptr->ActiveSEP, id, channel)); + + mpt_put_msg_frame(ioc->DoneCtx, ioc, mf); + + return 0; +} + +/** + * mptspi_initTarget - Target, LUN alloc/free functionality. + * @hd: Pointer to MPT_SCSI_HOST structure + * @vtarget: per target private data + * @sdev: SCSI device + * + * NOTE: It's only SAFE to call this routine if data points to + * sane & valid STANDARD INQUIRY data! + * + * Allocate and initialize memory for this target. + * Save inquiry data. + * + **/ +static void +mptspi_initTarget(MPT_SCSI_HOST *hd, VirtTarget *vtarget, + struct scsi_device *sdev) +{ + + /* Is LUN supported? If so, upper 2 bits will be 0 + * in first byte of inquiry data. + */ + if (sdev->inq_periph_qual != 0) + return; + + if (vtarget == NULL) + return; + + vtarget->type = sdev->type; + + if ((sdev->type == TYPE_PROCESSOR) && (hd->ioc->spi_data.Saf_Te)) { + /* Treat all Processors as SAF-TE if + * command line option is set */ + vtarget->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED; + mptspi_writeIOCPage4(hd, vtarget->channel, vtarget->id); + }else if ((sdev->type == TYPE_PROCESSOR) && + !(vtarget->tflags & MPT_TARGET_FLAGS_SAF_TE_ISSUED )) { + if (sdev->inquiry_len > 49 ) { + if (sdev->inquiry[44] == 'S' && + sdev->inquiry[45] == 'A' && + sdev->inquiry[46] == 'F' && + sdev->inquiry[47] == '-' && + sdev->inquiry[48] == 'T' && + sdev->inquiry[49] == 'E' ) { + vtarget->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED; + mptspi_writeIOCPage4(hd, vtarget->channel, vtarget->id); + } + } + } + mptspi_setTargetNegoParms(hd, vtarget, sdev); +} /** * mptspi_is_raid - Determines whether target is belonging to volume @@ -408,13 +671,16 @@ static int mptspi_slave_alloc(struct scsi_device *sdev) static int mptspi_slave_configure(struct scsi_device *sdev) { - int ret = mptscsih_slave_configure(sdev); struct _MPT_SCSI_HOST *hd = (struct _MPT_SCSI_HOST *)sdev->host->hostdata; + VirtTarget *vtarget = scsi_target(sdev)->hostdata; + int ret = mptscsih_slave_configure(sdev); if (ret) return ret; + mptspi_initTarget(hd, vtarget, sdev); + if ((sdev->channel == 1 || !(mptspi_is_raid(hd, sdev->id))) && !spi_initial_dv(sdev->sdev_target)) -- cgit v1.2.3