From af51715079e7fb6b290e1881d63d815dc4de5011 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 8 Aug 2007 09:11:32 -0700 Subject: MMC core learns about SPI Teach the MMC/SD/SDIO core about using SPI mode. - Use mmc_host_is_spi() so enumeration works through SPI signaling and protocols, not just the native versions. - Provide the SPI response type flags with each request issued, including requests from the new lock/unlock code. - Understand that cmd->resp[0] and mmc_get_status() results for SPI return different values than for "native" MMC/SD protocol; this affects resetting, checking card lock status, and some others. - Understand that some commands act a bit differently ... notably: * OP_COND command doesn't return the OCR * APP_CMD status doesn't have an R1_APP_CMD analogue Those changes required some new and updated primitives: - Provide utilities to access two SPI-only requests, and one request that wasn't previously needed: * mmc_spi_read_ocr() ... SPI only * mmc_spi_set_crc() ... SPI only (override by module parm) * mmc_send_cid() ... for use without broadcast mode - Updated internal routines: * Previous mmc_send_csd() modified into mmc_send_cxd_native(); it uses native "R2" responses, which include 16 bytes of data. * Previous mmc_send_ext_csd() becomes new mmc_send_cxd_data() helper for command-and-data access * Bugfix to that mmc_send_cxd_data() code: dma-to-stack is unsafe/nonportable, so kmalloc a bounce buffer instead. - Modified mmc_send_ext_csd() now uses mmc_send_cxd_data() helper - Modified mmc_send_csd(), and new mmc_spi_send_cid(), routines use those helper routines based on whether they're native or SPI The newest categories of cards supported by the MMC stack aren't expected to work yet with SPI: MMC or SD cards with over 4GB data, and SDIO. All those cards support SPI mode, so eventually they should work too. Signed-off-by: David Brownell Signed-off-by: Pierre Ossman --- drivers/mmc/core/bus.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) (limited to 'drivers/mmc/core/bus.c') diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c index 733ac95331c..8d6f6014870 100644 --- a/drivers/mmc/core/bus.c +++ b/drivers/mmc/core/bus.c @@ -243,10 +243,17 @@ int mmc_add_card(struct mmc_card *card) break; } - printk(KERN_INFO "%s: new %s%s card at address %04x\n", - mmc_hostname(card->host), - mmc_card_highspeed(card) ? "high speed " : "", - type, card->rca); + if (mmc_host_is_spi(card->host)) { + printk(KERN_INFO "%s: new %s%s card on SPI\n", + mmc_hostname(card->host), + mmc_card_highspeed(card) ? "high speed " : "", + type); + } else { + printk(KERN_INFO "%s: new %s%s card at address %04x\n", + mmc_hostname(card->host), + mmc_card_highspeed(card) ? "high speed " : "", + type, card->rca); + } card->dev.uevent_suppress = 1; @@ -278,8 +285,13 @@ int mmc_add_card(struct mmc_card *card) void mmc_remove_card(struct mmc_card *card) { if (mmc_card_present(card)) { - printk(KERN_INFO "%s: card %04x removed\n", - mmc_hostname(card->host), card->rca); + if (mmc_host_is_spi(card->host)) { + printk(KERN_INFO "%s: SPI card removed\n", + mmc_hostname(card->host)); + } else { + printk(KERN_INFO "%s: card %04x removed\n", + mmc_hostname(card->host), card->rca); + } if (card->host->bus_ops->sysfs_remove) card->host->bus_ops->sysfs_remove(card->host, card); -- cgit v1.2.3