From 7abd3ef9875eb2afcdcd4f450680298a2983a55e Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 23 May 2006 23:25:53 +0200 Subject: [MTD] Refactor NAND hwcontrol to cmd_ctrl The hwcontrol function enforced a step by step state machine for any kind of hardware chip access. Let the hardware driver know which control bits are set and inform it about a change of the control lines. Let the hardware driver write out the command and address bytes directly. This gives a peformance advantage for address bus controlled chips and simplifies the quirks in the hardware drivers. Signed-off-by: Thomas Gleixner --- drivers/mtd/nand/h1910.c | 40 +++++++++++----------------------------- 1 file changed, 11 insertions(+), 29 deletions(-) (limited to 'drivers/mtd/nand/h1910.c') diff --git a/drivers/mtd/nand/h1910.c b/drivers/mtd/nand/h1910.c index 06e91fa11b3..2d585d2d090 100644 --- a/drivers/mtd/nand/h1910.c +++ b/drivers/mtd/nand/h1910.c @@ -56,36 +56,18 @@ static struct mtd_partition partition_info[] = { /* * hardware specific access to control-lines + * + * NAND_NCE: bit 0 - don't care + * NAND_CLE: bit 1 - address bit 2 + * NAND_ALE: bit 2 - address bit 3 */ -static void h1910_hwcontrol(struct mtd_info *mtd, int cmd) +static void h1910_hwcontrol(struct mtd_info *mtd, int cmd, + unsigned int ctrl) { - struct nand_chip *this = (struct nand_chip *)(mtd->priv); - - switch (cmd) { - - case NAND_CTL_SETCLE: - this->IO_ADDR_R |= (1 << 2); - this->IO_ADDR_W |= (1 << 2); - break; - case NAND_CTL_CLRCLE: - this->IO_ADDR_R &= ~(1 << 2); - this->IO_ADDR_W &= ~(1 << 2); - break; - - case NAND_CTL_SETALE: - this->IO_ADDR_R |= (1 << 3); - this->IO_ADDR_W |= (1 << 3); - break; - case NAND_CTL_CLRALE: - this->IO_ADDR_R &= ~(1 << 3); - this->IO_ADDR_W &= ~(1 << 3); - break; - - case NAND_CTL_SETNCE: - break; - case NAND_CTL_CLRNCE: - break; - } + struct nand_chip *chip = mtd->priv; + + if (cmd != NAND_CMD_NONE) + writeb(cmd, chip->IO_ADDR_W | ((ctrl & 0x6) << 1)); } /* @@ -145,7 +127,7 @@ static int __init h1910_init(void) /* insert callbacks */ this->IO_ADDR_R = nandaddr; this->IO_ADDR_W = nandaddr; - this->hwcontrol = h1910_hwcontrol; + this->cmd_ctrl = h1910_hwcontrol; this->dev_ready = NULL; /* unknown whether that was correct or not so we will just do it like this */ /* 15 us command delay time */ this->chip_delay = 50; -- cgit v1.2.3