From 67a9c7af1f5eb5dbf1399b364fcf7e64dc28236c Mon Sep 17 00:00:00 2001 From: Thomas Koeller Date: Sat, 10 Feb 2007 11:21:27 +0100 Subject: [MTD] [NAND] eXcite nand flash driver This is a nand flash driver for the eXcite series of intelligent cameras manufactured by Basler Vision Technologies AG. Signed-off-by: Thomas Koeller Signed-off-by: David Woodhouse --- drivers/mtd/nand/Kconfig | 8 ++ drivers/mtd/nand/Makefile | 1 + drivers/mtd/nand/excite_nandflash.c | 248 ++++++++++++++++++++++++++++++++++++ 3 files changed, 257 insertions(+) create mode 100644 drivers/mtd/nand/excite_nandflash.c (limited to 'drivers/mtd') diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 143a7f04825..2d12dcdd740 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -217,6 +217,14 @@ config MTD_NAND_SHARPSL tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)" depends on MTD_NAND && ARCH_PXA +config MTD_NAND_BASLER_EXCITE + tristate "Support for NAND Flash on Basler eXcite" + depends on MTD_NAND && BASLER_EXCITE + help + This enables the driver for the NAND flash device found on the + Basler eXcite Smart Camera. If built as a module, the driver + will be named "excite_nandflash.ko". + config MTD_NAND_CAFE tristate "NAND support for OLPC CAFÉ chip" depends on MTD_NAND && PCI diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index f7a53f0b701..80f1dfc7794 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -24,6 +24,7 @@ obj-$(CONFIG_MTD_NAND_NANDSIM) += nandsim.o obj-$(CONFIG_MTD_NAND_CS553X) += cs553x_nand.o obj-$(CONFIG_MTD_NAND_NDFC) += ndfc.o obj-$(CONFIG_MTD_NAND_AT91) += at91_nand.o +obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += excite_nandflash.o nand-objs := nand_base.o nand_bbt.o cafe_nand-objs := cafe.o cafe_ecc.o diff --git a/drivers/mtd/nand/excite_nandflash.c b/drivers/mtd/nand/excite_nandflash.c new file mode 100644 index 00000000000..7e9afc4c775 --- /dev/null +++ b/drivers/mtd/nand/excite_nandflash.c @@ -0,0 +1,248 @@ +/* +* Copyright (C) 2005 - 2007 by Basler Vision Technologies AG +* Author: Thomas Koeller +* Original code by Thies Moeller +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include + +#include + +#define EXCITE_NANDFLASH_VERSION "0.1" + +/* I/O register offsets */ +#define EXCITE_NANDFLASH_DATA_BYTE 0x00 +#define EXCITE_NANDFLASH_STATUS_BYTE 0x0c +#define EXCITE_NANDFLASH_ADDR_BYTE 0x10 +#define EXCITE_NANDFLASH_CMD_BYTE 0x14 + +/* prefix for debug output */ +static const char module_id[] = "excite_nandflash"; + +/* + * partition definition + */ +static const struct mtd_partition partition_info[] = { + { + .name = "eXcite RootFS", + .offset = 0, + .size = MTDPART_SIZ_FULL + } +}; + +static inline const struct resource * +excite_nand_get_resource(struct platform_device *d, unsigned long flags, + const char *basename) +{ + char buf[80]; + + if (snprintf(buf, sizeof buf, "%s_%u", basename, d->id) >= sizeof buf) + return NULL; + return platform_get_resource_byname(d, flags, buf); +} + +static inline void __iomem * +excite_nand_map_regs(struct platform_device *d, const char *basename) +{ + void *result = NULL; + const struct resource *const r = + excite_nand_get_resource(d, IORESOURCE_MEM, basename); + + if (r) + result = ioremap_nocache(r->start, r->end + 1 - r->start); + return result; +} + +/* controller and mtd information */ +struct excite_nand_drvdata { + struct mtd_info board_mtd; + struct nand_chip board_chip; + void __iomem *regs; + void __iomem *tgt; +}; + +/* Control function */ +static void excite_nand_control(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + struct excite_nand_drvdata * const d = + container_of(mtd, struct excite_nand_drvdata, board_mtd); + + switch (ctrl) { + case NAND_CTRL_CHANGE | NAND_CTRL_CLE: + d->tgt = d->regs + EXCITE_NANDFLASH_CMD_BYTE; + break; + case NAND_CTRL_CHANGE | NAND_CTRL_ALE: + d->tgt = d->regs + EXCITE_NANDFLASH_ADDR_BYTE; + break; + case NAND_CTRL_CHANGE | NAND_NCE: + d->tgt = d->regs + EXCITE_NANDFLASH_DATA_BYTE; + break; + } + + if (cmd != NAND_CMD_NONE) + __raw_writeb(cmd, d->tgt); +} + +/* Return 0 if flash is busy, 1 if ready */ +static int excite_nand_devready(struct mtd_info *mtd) +{ + struct excite_nand_drvdata * const drvdata = + container_of(mtd, struct excite_nand_drvdata, board_mtd); + + return __raw_readb(drvdata->regs + EXCITE_NANDFLASH_STATUS_BYTE); +} + +/* + * Called by device layer to remove the driver. + * The binding to the mtd and all allocated + * resources are released. + */ +static int __exit excite_nand_remove(struct device *dev) +{ + struct excite_nand_drvdata * const this = dev_get_drvdata(dev); + + dev_set_drvdata(dev, NULL); + + if (unlikely(!this)) { + printk(KERN_ERR "%s: called %s without private data!!", + module_id, __func__); + return -EINVAL; + } + + /* first thing we need to do is release our mtd + * then go through freeing the resource used + */ + nand_release(&this->board_mtd); + + /* free the common resources */ + iounmap(this->regs); + kfree(this); + + DEBUG(MTD_DEBUG_LEVEL1, "%s: removed\n", module_id); + return 0; +} + +/* + * Called by device layer when it finds a device matching + * one our driver can handle. This code checks to see if + * it can allocate all necessary resources then calls the + * nand layer to look for devices. +*/ +static int __init excite_nand_probe(struct device *dev) +{ + struct platform_device * const pdev = to_platform_device(dev); + struct excite_nand_drvdata *drvdata; /* private driver data */ + struct nand_chip *board_chip; /* private flash chip data */ + struct mtd_info *board_mtd; /* mtd info for this board */ + int scan_res; + + drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL); + if (unlikely(!drvdata)) { + printk(KERN_ERR "%s: no memory for drvdata\n", + module_id); + return -ENOMEM; + } + + /* bind private data into driver */ + dev_set_drvdata(dev, drvdata); + + /* allocate and map the resource */ + drvdata->regs = + excite_nand_map_regs(pdev, EXCITE_NANDFLASH_RESOURCE_REGS); + + if (unlikely(!drvdata->regs)) { + printk(KERN_ERR "%s: cannot reserve register region\n", + module_id); + kfree(drvdata); + return -ENXIO; + } + + drvdata->tgt = drvdata->regs + EXCITE_NANDFLASH_DATA_BYTE; + + /* initialise our chip */ + board_chip = &drvdata->board_chip; + board_chip->IO_ADDR_R = board_chip->IO_ADDR_W = + drvdata->regs + EXCITE_NANDFLASH_DATA_BYTE; + board_chip->cmd_ctrl = excite_nand_control; + board_chip->dev_ready = excite_nand_devready; + board_chip->chip_delay = 25; + board_chip->ecc.mode = NAND_ECC_SOFT; + + /* link chip to mtd */ + board_mtd = &drvdata->board_mtd; + board_mtd->priv = board_chip; + + DEBUG(MTD_DEBUG_LEVEL2, "%s: device scan\n", module_id); + scan_res = nand_scan(&drvdata->board_mtd, 1); + + if (likely(!scan_res)) { + DEBUG(MTD_DEBUG_LEVEL2, "%s: register partitions\n", module_id); + add_mtd_partitions(&drvdata->board_mtd, partition_info, + sizeof partition_info / sizeof partition_info[0]); + } else { + iounmap(drvdata->regs); + kfree(drvdata); + printk(KERN_ERR "%s: device scan failed\n", module_id); + return -EIO; + } + return 0; +} + +static struct device_driver excite_nand_driver = { + .name = "excite_nand", + .bus = &platform_bus_type, + .probe = excite_nand_probe, + .remove = __exit_p(excite_nand_remove) +}; + +static int __init excite_nand_init(void) +{ + pr_info("Basler eXcite nand flash driver Version " + EXCITE_NANDFLASH_VERSION "\n"); + return driver_register(&excite_nand_driver); +} + +static void __exit excite_nand_exit(void) +{ + driver_unregister(&excite_nand_driver); +} + +module_init(excite_nand_init); +module_exit(excite_nand_exit); + +MODULE_AUTHOR("Thomas Koeller "); +MODULE_DESCRIPTION("Basler eXcite NAND-Flash driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(EXCITE_NANDFLASH_VERSION) -- cgit v1.2.3