From 6c2a9efadec464f848b18216e41783d3c01c7d10 Mon Sep 17 00:00:00 2001 From: Frans Pop Date: Mon, 22 Sep 2008 14:52:22 -0700 Subject: e1000e: avoid duplicated output of device name in kernel warning With 2.6.27-rc3 I noticed the following messages in my boot log: 0000:01:00.0: 0000:01:00.0: Warning: detected DSPD enabled in EEPROM 0000:01:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:16:76:04:ff:09 The second seems correct, but the first has a silly repetition of the PCI device before the actual message. The message originates from e1000_eeprom_checks in e1000e/netdev.c. With this patch below the first message becomes e1000e 0000:01:00.0: Warning: detected DSPD enabled in EEPROM which makes it similar to directly preceding messages. Use dev_warn instead of e_warn in e1000_eeprom_checks() as the interface name has not yet been assigned at that point. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Frans Pop Signed-off-by: Jeff Kirsher Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/e1000e/netdev.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/net/e1000e') diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 0925204cd2d..24d05cb7005 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -4671,13 +4671,15 @@ static void e1000_eeprom_checks(struct e1000_adapter *adapter) ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &buf); if (!(le16_to_cpu(buf) & (1 << 0))) { /* Deep Smart Power Down (DSPD) */ - e_warn("Warning: detected DSPD enabled in EEPROM\n"); + dev_warn(&adapter->pdev->dev, + "Warning: detected DSPD enabled in EEPROM\n"); } ret_val = e1000_read_nvm(hw, NVM_INIT_3GIO_3, 1, &buf); if (le16_to_cpu(buf) & (3 << 2)) { /* ASPM enable */ - e_warn("Warning: detected ASPM enabled in EEPROM\n"); + dev_warn(&adapter->pdev->dev, + "Warning: detected ASPM enabled in EEPROM\n"); } } -- cgit v1.2.3