From 0befdb3e0a26a8949063915274e1bec8873c526b Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Fri, 31 Oct 2008 00:46:40 -0700 Subject: ixgbe: add device support for 82598AT (copper 10GbE) adapters Intel is currently shipping support for adapters with a phy that does 10GBase-T (copper), which is 10 Gigabit ethernet over standard Category 6 cabling. Signed-off-by: Jesse Brandeburg Signed-off-by: Jeff Kirsher Signed-off-by: Jeff Garzik --- drivers/net/ixgbe/ixgbe_phy.c | 68 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 68 insertions(+) (limited to 'drivers/net/ixgbe/ixgbe_phy.c') diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c index 764035a8c9a..981e6d84959 100644 --- a/drivers/net/ixgbe/ixgbe_phy.c +++ b/drivers/net/ixgbe/ixgbe_phy.c @@ -121,6 +121,9 @@ static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id) enum ixgbe_phy_type phy_type; switch (phy_id) { + case TN1010_PHY_ID: + phy_type = ixgbe_phy_tn; + break; case QT2022_PHY_ID: phy_type = ixgbe_phy_qt; break; @@ -426,3 +429,68 @@ s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw, return 0; } +/** + * ixgbe_check_phy_link_tnx - Determine link and speed status + * @hw: pointer to hardware structure + * + * Reads the VS1 register to determine if link is up and the current speed for + * the PHY. + **/ +s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw, ixgbe_link_speed *speed, + bool *link_up) +{ + s32 status = 0; + u32 time_out; + u32 max_time_out = 10; + u16 phy_link = 0; + u16 phy_speed = 0; + u16 phy_data = 0; + + /* Initialize speed and link to default case */ + *link_up = false; + *speed = IXGBE_LINK_SPEED_10GB_FULL; + + /* + * Check current speed and link status of the PHY register. + * This is a vendor specific register and may have to + * be changed for other copper PHYs. + */ + for (time_out = 0; time_out < max_time_out; time_out++) { + udelay(10); + status = hw->phy.ops.read_reg(hw, + IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + &phy_data); + phy_link = phy_data & + IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS; + phy_speed = phy_data & + IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS; + if (phy_link == IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS) { + *link_up = true; + if (phy_speed == + IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS) + *speed = IXGBE_LINK_SPEED_1GB_FULL; + break; + } + } + + return status; +} + +/** + * ixgbe_get_phy_firmware_version_tnx - Gets the PHY Firmware Version + * @hw: pointer to hardware structure + * @firmware_version: pointer to the PHY Firmware Version + **/ +s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw, + u16 *firmware_version) +{ + s32 status = 0; + + status = hw->phy.ops.read_reg(hw, TNX_FW_REV, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + firmware_version); + + return status; +} + -- cgit v1.2.3