From 596f86a8d8a70005728944143f08fe5414443355 Mon Sep 17 00:00:00 2001 From: "shemminger@osdl.org" Date: Wed, 23 Nov 2005 22:00:49 -0800 Subject: [PATCH] sk98lin: fix checksumming code Remove code from sk98lin that does it's own checksum validation. This code is incorrect when dealing with nested protocols like VLAN's, and it is better to use regular receive code path to handle hardware checksum. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sk98lin/skge.c | 165 ++++++++++----------------------------------- 1 file changed, 36 insertions(+), 129 deletions(-) (limited to 'drivers/net/sk98lin/skge.c') diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c index b18c92cb629..857ade44788 100644 --- a/drivers/net/sk98lin/skge.c +++ b/drivers/net/sk98lin/skge.c @@ -101,7 +101,6 @@ * "h/skgeinit.h" * "h/skaddr.h" * "h/skgesirq.h" - * "h/skcsum.h" * "h/skrlmt.h" * ******************************************************************************/ @@ -113,6 +112,7 @@ #include #include #include +#include #include "h/skdrv1st.h" #include "h/skdrv2nd.h" @@ -601,11 +601,6 @@ SK_BOOL DualNet; return(-EAGAIN); } - SkCsSetReceiveFlags(pAC, - SKCS_PROTO_IP | SKCS_PROTO_TCP | SKCS_PROTO_UDP, - &pAC->CsOfs1, &pAC->CsOfs2, 0); - pAC->CsOfs = (pAC->CsOfs2 << 16) | pAC->CsOfs1; - BoardInitMem(pAC); /* tschilling: New common function with minimum size check. */ DualNet = SK_FALSE; @@ -823,7 +818,7 @@ uintptr_t VNextDescr; /* the virtual bus address of the next descriptor */ /* set the pointers right */ pDescr->VNextRxd = VNextDescr & 0xffffffffULL; pDescr->pNextRxd = pNextDescr; - pDescr->TcpSumStarts = pAC->CsOfs; + pDescr->TcpSumStarts = 0; /* advance one step */ pPrevDescr = pDescr; @@ -1505,8 +1500,6 @@ struct sk_buff *pMessage) /* pointer to send-message */ TXD *pOldTxd; unsigned long Flags; SK_U64 PhysAddr; - int Protocol; - int IpHeaderLength; int BytesSend = pMessage->len; SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_TX_PROGRESS, ("X")); @@ -1579,8 +1572,10 @@ struct sk_buff *pMessage) /* pointer to send-message */ pTxd->pMBuf = pMessage; if (pMessage->ip_summed == CHECKSUM_HW) { - Protocol = ((SK_U8)pMessage->data[C_OFFSET_IPPROTO] & 0xff); - if ((Protocol == C_PROTO_ID_UDP) && + u16 hdrlen = pMessage->h.raw - pMessage->data; + u16 offset = hdrlen + pMessage->csum; + + if ((pMessage->h.ipiph->protocol == IPPROTO_UDP ) && (pAC->GIni.GIChipRev == 0) && (pAC->GIni.GIChipId == CHIP_ID_YUKON)) { pTxd->TBControl = BMU_TCP_CHECK; @@ -1588,14 +1583,9 @@ struct sk_buff *pMessage) /* pointer to send-message */ pTxd->TBControl = BMU_UDP_CHECK; } - IpHeaderLength = (SK_U8)pMessage->data[C_OFFSET_IPHEADER]; - IpHeaderLength = (IpHeaderLength & 0xf) * 4; - pTxd->TcpSumOfs = 0; /* PH-Checksum already calculated */ - pTxd->TcpSumSt = C_LEN_ETHERMAC_HEADER + IpHeaderLength + - (Protocol == C_PROTO_ID_UDP ? - C_OFFSET_UDPHEADER_UDPCS : - C_OFFSET_TCPHEADER_TCPCS); - pTxd->TcpSumWr = C_LEN_ETHERMAC_HEADER + IpHeaderLength; + pTxd->TcpSumOfs = 0; + pTxd->TcpSumSt = hdrlen; + pTxd->TcpSumWr = offset; pTxd->TBControl |= BMU_OWN | BMU_STF | BMU_SW | BMU_EOF | @@ -1658,11 +1648,10 @@ struct sk_buff *pMessage) /* pointer to send-message */ TXD *pTxdLst; int CurrFrag; int BytesSend; - int IpHeaderLength; - int Protocol; skb_frag_t *sk_frag; SK_U64 PhysAddr; unsigned long Flags; + SK_U32 Control; spin_lock_irqsave(&pTxPort->TxDesRingLock, Flags); #ifndef USE_TX_COMPLETE @@ -1685,7 +1674,6 @@ struct sk_buff *pMessage) /* pointer to send-message */ pTxdFst = pTxd; pTxdLst = pTxd; BytesSend = 0; - Protocol = 0; /* ** Map the first fragment (header) into the DMA-space @@ -1703,32 +1691,31 @@ struct sk_buff *pMessage) /* pointer to send-message */ ** Does the HW need to evaluate checksum for TCP or UDP packets? */ if (pMessage->ip_summed == CHECKSUM_HW) { - pTxd->TBControl = BMU_STF | BMU_STFWD | skb_headlen(pMessage); + u16 hdrlen = pMessage->h.raw - pMessage->data; + u16 offset = hdrlen + pMessage->csum; + + Control = BMU_STFWD; + /* ** We have to use the opcode for tcp here, because the ** opcode for udp is not working in the hardware yet ** (Revision 2.0) */ - Protocol = ((SK_U8)pMessage->data[C_OFFSET_IPPROTO] & 0xff); - if ((Protocol == C_PROTO_ID_UDP) && + if ((pMessage->h.ipiph->protocol == IPPROTO_UDP ) && (pAC->GIni.GIChipRev == 0) && (pAC->GIni.GIChipId == CHIP_ID_YUKON)) { - pTxd->TBControl |= BMU_TCP_CHECK; + Control |= BMU_TCP_CHECK; } else { - pTxd->TBControl |= BMU_UDP_CHECK; + Control |= BMU_UDP_CHECK; } - IpHeaderLength = ((SK_U8)pMessage->data[C_OFFSET_IPHEADER] & 0xf)*4; - pTxd->TcpSumOfs = 0; /* PH-Checksum already claculated */ - pTxd->TcpSumSt = C_LEN_ETHERMAC_HEADER + IpHeaderLength + - (Protocol == C_PROTO_ID_UDP ? - C_OFFSET_UDPHEADER_UDPCS : - C_OFFSET_TCPHEADER_TCPCS); - pTxd->TcpSumWr = C_LEN_ETHERMAC_HEADER + IpHeaderLength; - } else { - pTxd->TBControl = BMU_CHECK | BMU_SW | BMU_STF | - skb_headlen(pMessage); - } + pTxd->TcpSumOfs = 0; + pTxd->TcpSumSt = hdrlen; + pTxd->TcpSumWr = offset; + } else + Control = BMU_CHECK | BMU_SW; + + pTxd->TBControl = BMU_STF | Control | skb_headlen(pMessage); pTxd = pTxd->pNextTxd; pTxPort->TxdRingFree--; @@ -1752,40 +1739,18 @@ struct sk_buff *pMessage) /* pointer to send-message */ pTxd->VDataHigh = (SK_U32) (PhysAddr >> 32); pTxd->pMBuf = pMessage; - /* - ** Does the HW need to evaluate checksum for TCP or UDP packets? - */ - if (pMessage->ip_summed == CHECKSUM_HW) { - pTxd->TBControl = BMU_OWN | BMU_SW | BMU_STFWD; - /* - ** We have to use the opcode for tcp here because the - ** opcode for udp is not working in the hardware yet - ** (revision 2.0) - */ - if ((Protocol == C_PROTO_ID_UDP) && - (pAC->GIni.GIChipRev == 0) && - (pAC->GIni.GIChipId == CHIP_ID_YUKON)) { - pTxd->TBControl |= BMU_TCP_CHECK; - } else { - pTxd->TBControl |= BMU_UDP_CHECK; - } - } else { - pTxd->TBControl = BMU_CHECK | BMU_SW | BMU_OWN; - } + pTxd->TBControl = Control | BMU_OWN | sk_frag->size;; /* ** Do we have the last fragment? */ if( (CurrFrag+1) == skb_shinfo(pMessage)->nr_frags ) { #ifdef USE_TX_COMPLETE - pTxd->TBControl |= BMU_EOF | BMU_IRQ_EOF | sk_frag->size; + pTxd->TBControl |= BMU_EOF | BMU_IRQ_EOF; #else - pTxd->TBControl |= BMU_EOF | sk_frag->size; + pTxd->TBControl |= BMU_EOF; #endif pTxdFst->TBControl |= BMU_OWN | BMU_SW; - - } else { - pTxd->TBControl |= sk_frag->size; } pTxdLst = pTxd; pTxd = pTxd->pNextTxd; @@ -2032,7 +1997,6 @@ SK_U32 Control; /* control field of descriptor */ struct sk_buff *pMsg; /* pointer to message holding frame */ struct sk_buff *pNewMsg; /* pointer to a new message for copying frame */ int FrameLength; /* total length of received frame */ -int IpFrameLength; SK_MBUF *pRlmtMbuf; /* ptr to a buffer for giving a frame to rlmt */ SK_EVPARA EvPara; /* an event parameter union */ unsigned long Flags; /* for spin lock */ @@ -2045,10 +2009,6 @@ SK_BOOL IsMc; SK_BOOL IsBadFrame; /* Bad frame */ SK_U32 FrameStat; -unsigned short Csum1; -unsigned short Csum2; -unsigned short Type; -int Result; SK_U64 PhysAddr; rx_start: @@ -2177,8 +2137,8 @@ rx_start: (dma_addr_t) PhysAddr, FrameLength, PCI_DMA_FROMDEVICE); - eth_copy_and_sum(pNewMsg, pMsg->data, - FrameLength, 0); + memcpy(pNewMsg->data, pMsg, FrameLength); + pci_dma_sync_single_for_device(pAC->PciDev, (dma_addr_t) PhysAddr, FrameLength, @@ -2206,69 +2166,16 @@ rx_start: /* set length in message */ skb_put(pMsg, FrameLength); - /* hardware checksum */ - Type = ntohs(*((short*)&pMsg->data[12])); + } /* frame > SK_COPY_TRESHOLD */ #ifdef USE_SK_RX_CHECKSUM - if (Type == 0x800) { - Csum1=le16_to_cpu(pRxd->TcpSums & 0xffff); - Csum2=le16_to_cpu((pRxd->TcpSums >> 16) & 0xffff); - IpFrameLength = (int) ntohs((unsigned short) - ((unsigned short *) pMsg->data)[8]); - - /* - * Test: If frame is padded, a check is not possible! - * Frame not padded? Length difference must be 14 (0xe)! - */ - if ((FrameLength - IpFrameLength) != 0xe) { - /* Frame padded => TCP offload not possible! */ - pMsg->ip_summed = CHECKSUM_NONE; - } else { - /* Frame not padded => TCP offload! */ - if ((((Csum1 & 0xfffe) && (Csum2 & 0xfffe)) && - (pAC->GIni.GIChipId == CHIP_ID_GENESIS)) || - (pAC->ChipsetType)) { - Result = SkCsGetReceiveInfo(pAC, - &pMsg->data[14], - Csum1, Csum2, pRxPort->PortIndex); - if (Result == - SKCS_STATUS_IP_FRAGMENT || - Result == - SKCS_STATUS_IP_CSUM_OK || - Result == - SKCS_STATUS_TCP_CSUM_OK || - Result == - SKCS_STATUS_UDP_CSUM_OK) { - pMsg->ip_summed = - CHECKSUM_UNNECESSARY; - } - else if (Result == - SKCS_STATUS_TCP_CSUM_ERROR || - Result == - SKCS_STATUS_UDP_CSUM_ERROR || - Result == - SKCS_STATUS_IP_CSUM_ERROR_UDP || - Result == - SKCS_STATUS_IP_CSUM_ERROR_TCP || - Result == - SKCS_STATUS_IP_CSUM_ERROR ) { - /* HW Checksum error */ - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, - SK_DBGCAT_DRV_RX_PROGRESS, - ("skge: CRC error. Frame dropped!\n")); - goto rx_failed; - } else { - pMsg->ip_summed = - CHECKSUM_NONE; - } - }/* checksumControl calculation valid */ - } /* Frame length check */ - } /* IP frame */ + pMsg->csum = pRxd->TcpSums; + pMsg->ip_summed = CHECKSUM_HW; #else - pMsg->ip_summed = CHECKSUM_NONE; + pMsg->ip_summed = CHECKSUM_NONE; #endif - } /* frame > SK_COPY_TRESHOLD */ - + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, 1,("V")); ForRlmt = SK_RLMT_RX_PROTOCOL; #if 0 -- cgit v1.2.3 From 4f4c81504284c0ab66fc6d773dfb3b54aca02427 Mon Sep 17 00:00:00 2001 From: "shemminger@osdl.org" Date: Wed, 23 Nov 2005 22:00:50 -0800 Subject: [PATCH] sk98lin: add permanent address support Add permanent address and link status support via ethtool. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sk98lin/skge.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net/sk98lin/skge.c') diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c index 857ade44788..6e2ffd684c2 100644 --- a/drivers/net/sk98lin/skge.c +++ b/drivers/net/sk98lin/skge.c @@ -4908,8 +4908,8 @@ static int __devinit skge_probe_one(struct pci_dev *pdev, SkGeYellowLED(pAC, pAC->IoBase, 1); - memcpy(&dev->dev_addr, &pAC->Addr.Net[0].CurrentMacAddress, 6); + memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); SkGeProcCreate(dev); @@ -4962,6 +4962,7 @@ static int __devinit skge_probe_one(struct pci_dev *pdev, SkGeProcCreate(dev); memcpy(&dev->dev_addr, &pAC->Addr.Net[1].CurrentMacAddress, 6); + memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); printk("%s: %s\n", dev->name, pAC->DeviceStr); printk(" PrefPort:B RlmtMode:Dual Check Link State\n"); -- cgit v1.2.3 From be0df20cb5ffd36ced9393d004e473d5c531b5da Mon Sep 17 00:00:00 2001 From: "shemminger@osdl.org" Date: Wed, 23 Nov 2005 22:00:51 -0800 Subject: [PATCH] sk98lin: avoid message confusion with skge Avoid possible confusion between skge and sk98lin driver by tagging messages properly. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sk98lin/skge.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net/sk98lin/skge.c') diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c index 6e2ffd684c2..00c5d7f04c6 100644 --- a/drivers/net/sk98lin/skge.c +++ b/drivers/net/sk98lin/skge.c @@ -4853,7 +4853,7 @@ static int __devinit skge_probe_one(struct pci_dev *pdev, dev->irq = pdev->irq; error = SkGeInitPCI(pAC); if (error) { - printk("SKGE: PCI setup failed: %i\n", error); + printk(KERN_ERR "sk98lin: PCI setup failed: %i\n", error); goto out_free_netdev; } @@ -4889,7 +4889,7 @@ static int __devinit skge_probe_one(struct pci_dev *pdev, /* Register net device */ if (register_netdev(dev)) { - printk(KERN_ERR "SKGE: Could not register device.\n"); + printk(KERN_ERR "sk98lin: Could not register device.\n"); goto out_free_resources; } @@ -4955,7 +4955,7 @@ static int __devinit skge_probe_one(struct pci_dev *pdev, #endif if (register_netdev(dev)) { - printk(KERN_ERR "SKGE: Could not register device.\n"); + printk(KERN_ERR "sk98lin: Could not register device for seconf port.\n"); free_netdev(dev); pAC->dev[1] = pAC->dev[0]; } else { -- cgit v1.2.3