From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/net/tulip/tulip_core.c | 1861 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1861 insertions(+) create mode 100644 drivers/net/tulip/tulip_core.c (limited to 'drivers/net/tulip/tulip_core.c') diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c new file mode 100644 index 00000000000..d098b3ba353 --- /dev/null +++ b/drivers/net/tulip/tulip_core.c @@ -0,0 +1,1861 @@ +/* tulip_core.c: A DEC 21x4x-family ethernet driver for Linux. */ + +/* + Maintained by Jeff Garzik + Copyright 2000,2001 The Linux Kernel Team + Written/copyright 1994-2001 by Donald Becker. + + This software may be used and distributed according to the terms + of the GNU General Public License, incorporated herein by reference. + + Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} + for more information on this driver, or visit the project + Web page at http://sourceforge.net/projects/tulip/ + +*/ + +#include + +#define DRV_NAME "tulip" +#ifdef CONFIG_TULIP_NAPI +#define DRV_VERSION "1.1.13-NAPI" /* Keep at least for test */ +#else +#define DRV_VERSION "1.1.13" +#endif +#define DRV_RELDATE "May 11, 2002" + + +#include +#include +#include "tulip.h" +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef __sparc__ +#include +#endif + +static char version[] __devinitdata = + "Linux Tulip driver version " DRV_VERSION " (" DRV_RELDATE ")\n"; + + +/* A few user-configurable values. */ + +/* Maximum events (Rx packets, etc.) to handle at each interrupt. */ +static unsigned int max_interrupt_work = 25; + +#define MAX_UNITS 8 +/* Used to pass the full-duplex flag, etc. */ +static int full_duplex[MAX_UNITS]; +static int options[MAX_UNITS]; +static int mtu[MAX_UNITS]; /* Jumbo MTU for interfaces. */ + +/* The possible media types that can be set in options[] are: */ +const char * const medianame[32] = { + "10baseT", "10base2", "AUI", "100baseTx", + "10baseT-FDX", "100baseTx-FDX", "100baseT4", "100baseFx", + "100baseFx-FDX", "MII 10baseT", "MII 10baseT-FDX", "MII", + "10baseT(forced)", "MII 100baseTx", "MII 100baseTx-FDX", "MII 100baseT4", + "MII 100baseFx-HDX", "MII 100baseFx-FDX", "Home-PNA 1Mbps", "Invalid-19", + "","","","", "","","","", "","","","Transceiver reset", +}; + +/* Set the copy breakpoint for the copy-only-tiny-buffer Rx structure. */ +#if defined(__alpha__) || defined(__arm__) || defined(__hppa__) \ + || defined(__sparc_) || defined(__ia64__) \ + || defined(__sh__) || defined(__mips__) +static int rx_copybreak = 1518; +#else +static int rx_copybreak = 100; +#endif + +/* + Set the bus performance register. + Typical: Set 16 longword cache alignment, no burst limit. + Cache alignment bits 15:14 Burst length 13:8 + 0000 No alignment 0x00000000 unlimited 0800 8 longwords + 4000 8 longwords 0100 1 longword 1000 16 longwords + 8000 16 longwords 0200 2 longwords 2000 32 longwords + C000 32 longwords 0400 4 longwords + Warning: many older 486 systems are broken and require setting 0x00A04800 + 8 longword cache alignment, 8 longword burst. + ToDo: Non-Intel setting could be better. +*/ + +#if defined(__alpha__) || defined(__ia64__) +static int csr0 = 0x01A00000 | 0xE000; +#elif defined(__i386__) || defined(__powerpc__) || defined(__x86_64__) +static int csr0 = 0x01A00000 | 0x8000; +#elif defined(__sparc__) || defined(__hppa__) +/* The UltraSparc PCI controllers will disconnect at every 64-byte + * crossing anyways so it makes no sense to tell Tulip to burst + * any more than that. + */ +static int csr0 = 0x01A00000 | 0x9000; +#elif defined(__arm__) || defined(__sh__) +static int csr0 = 0x01A00000 | 0x4800; +#elif defined(__mips__) +static int csr0 = 0x00200000 | 0x4000; +#else +#warning Processor architecture undefined! +static int csr0 = 0x00A00000 | 0x4800; +#endif + +/* Operational parameters that usually are not changed. */ +/* Time in jiffies before concluding the transmitter is hung. */ +#define TX_TIMEOUT (4*HZ) + + +MODULE_AUTHOR("The Linux Kernel Team"); +MODULE_DESCRIPTION("Digital 21*4* Tulip ethernet driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); +module_param(tulip_debug, int, 0); +module_param(max_interrupt_work, int, 0); +module_param(rx_copybreak, int, 0); +module_param(csr0, int, 0); +module_param_array(options, int, NULL, 0); +module_param_array(full_duplex, int, NULL, 0); + +#define PFX DRV_NAME ": " + +#ifdef TULIP_DEBUG +int tulip_debug = TULIP_DEBUG; +#else +int tulip_debug = 1; +#endif + + + +/* + * This table use during operation for capabilities and media timer. + * + * It is indexed via the values in 'enum chips' + */ + +struct tulip_chip_table tulip_tbl[] = { + { }, /* placeholder for array, slot unused currently */ + { }, /* placeholder for array, slot unused currently */ + + /* DC21140 */ + { "Digital DS21140 Tulip", 128, 0x0001ebef, + HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | HAS_PCI_MWI, tulip_timer }, + + /* DC21142, DC21143 */ + { "Digital DS21143 Tulip", 128, 0x0801fbff, + HAS_MII | HAS_MEDIA_TABLE | ALWAYS_CHECK_MII | HAS_ACPI | HAS_NWAY + | HAS_INTR_MITIGATION | HAS_PCI_MWI, t21142_timer }, + + /* LC82C168 */ + { "Lite-On 82c168 PNIC", 256, 0x0001fbef, + HAS_MII | HAS_PNICNWAY, pnic_timer }, + + /* MX98713 */ + { "Macronix 98713 PMAC", 128, 0x0001ebef, + HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM, mxic_timer }, + + /* MX98715 */ + { "Macronix 98715 PMAC", 256, 0x0001ebef, + HAS_MEDIA_TABLE, mxic_timer }, + + /* MX98725 */ + { "Macronix 98725 PMAC", 256, 0x0001ebef, + HAS_MEDIA_TABLE, mxic_timer }, + + /* AX88140 */ + { "ASIX AX88140", 128, 0x0001fbff, + HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | MC_HASH_ONLY + | IS_ASIX, tulip_timer }, + + /* PNIC2 */ + { "Lite-On PNIC-II", 256, 0x0801fbff, + HAS_MII | HAS_NWAY | HAS_8023X | HAS_PCI_MWI, pnic2_timer }, + + /* COMET */ + { "ADMtek Comet", 256, 0x0001abef, + HAS_MII | MC_HASH_ONLY | COMET_MAC_ADDR, comet_timer }, + + /* COMPEX9881 */ + { "Compex 9881 PMAC", 128, 0x0001ebef, + HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM, mxic_timer }, + + /* I21145 */ + { "Intel DS21145 Tulip", 128, 0x0801fbff, + HAS_MII | HAS_MEDIA_TABLE | ALWAYS_CHECK_MII | HAS_ACPI + | HAS_NWAY | HAS_PCI_MWI, t21142_timer }, + + /* DM910X */ + { "Davicom DM9102/DM9102A", 128, 0x0001ebef, + HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | HAS_ACPI, + tulip_timer }, + + /* RS7112 */ + { "Conexant LANfinity", 256, 0x0001ebef, + HAS_MII | HAS_ACPI, tulip_timer }, + + /* ULi526X */ + { "ULi M5261/M5263", 128, 0x0001ebef, + HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | HAS_ACPI, tulip_timer }, +}; + + +static struct pci_device_id tulip_pci_tbl[] = { + { 0x1011, 0x0009, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DC21140 }, + { 0x1011, 0x0019, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DC21143 }, + { 0x11AD, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, LC82C168 }, + { 0x10d9, 0x0512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MX98713 }, + { 0x10d9, 0x0531, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MX98715 }, +/* { 0x10d9, 0x0531, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MX98725 },*/ + { 0x125B, 0x1400, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AX88140 }, + { 0x11AD, 0xc115, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PNIC2 }, + { 0x1317, 0x0981, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, + { 0x1317, 0x0985, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, + { 0x1317, 0x1985, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, + { 0x1317, 0x9511, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, + { 0x13D1, 0xAB02, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, + { 0x13D1, 0xAB03, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, + { 0x13D1, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, + { 0x104A, 0x0981, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, + { 0x104A, 0x2774, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, + { 0x1259, 0xa120, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, + { 0x11F6, 0x9881, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMPEX9881 }, + { 0x8086, 0x0039, PCI_ANY_ID, PCI_ANY_ID, 0, 0, I21145 }, + { 0x1282, 0x9100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DM910X }, + { 0x1282, 0x9102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DM910X }, + { 0x1113, 0x1216, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, + { 0x1113, 0x1217, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MX98715 }, + { 0x1113, 0x9511, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, + { 0x1186, 0x1541, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, + { 0x1186, 0x1561, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, + { 0x1186, 0x1591, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, + { 0x14f1, 0x1803, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CONEXANT }, + { 0x1626, 0x8410, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, + { 0x1737, 0xAB09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, + { 0x1737, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, + { 0x17B3, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, + { 0x10b9, 0x5261, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ULI526X }, /* ALi 1563 integrated ethernet */ + { 0x10b9, 0x5263, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ULI526X }, /* ALi 1563 integrated ethernet */ + { 0x10b7, 0x9300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* 3Com 3CSOHO100B-TX */ + { } /* terminate list */ +}; +MODULE_DEVICE_TABLE(pci, tulip_pci_tbl); + + +/* A full-duplex map for media types. */ +const char tulip_media_cap[32] = +{0,0,0,16, 3,19,16,24, 27,4,7,5, 0,20,23,20, 28,31,0,0, }; + +static void tulip_tx_timeout(struct net_device *dev); +static void tulip_init_ring(struct net_device *dev); +static int tulip_start_xmit(struct sk_buff *skb, struct net_device *dev); +static int tulip_open(struct net_device *dev); +static int tulip_close(struct net_device *dev); +static void tulip_up(struct net_device *dev); +static void tulip_down(struct net_device *dev); +static struct net_device_stats *tulip_get_stats(struct net_device *dev); +static int private_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); +static void set_rx_mode(struct net_device *dev); +#ifdef CONFIG_NET_POLL_CONTROLLER +static void poll_tulip(struct net_device *dev); +#endif + +static void tulip_set_power_state (struct tulip_private *tp, + int sleep, int snooze) +{ + if (tp->flags & HAS_ACPI) { + u32 tmp, newtmp; + pci_read_config_dword (tp->pdev, CFDD, &tmp); + newtmp = tmp & ~(CFDD_Sleep | CFDD_Snooze); + if (sleep) + newtmp |= CFDD_Sleep; + else if (snooze) + newtmp |= CFDD_Snooze; + if (tmp != newtmp) + pci_write_config_dword (tp->pdev, CFDD, newtmp); + } + +} + + +static void tulip_up(struct net_device *dev) +{ + struct tulip_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->base_addr; + int next_tick = 3*HZ; + int i; + + /* Wake the chip from sleep/snooze mode. */ + tulip_set_power_state (tp, 0, 0); + + /* On some chip revs we must set the MII/SYM port before the reset!? */ + if (tp->mii_cnt || (tp->mtable && tp->mtable->has_mii)) + iowrite32(0x00040000, ioaddr + CSR6); + + /* Reset the chip, holding bit 0 set at least 50 PCI cycles. */ + iowrite32(0x00000001, ioaddr + CSR0); + udelay(100); + + /* Deassert reset. + Wait the specified 50 PCI cycles after a reset by initializing + Tx and Rx queues and the address filter list. */ + iowrite32(tp->csr0, ioaddr + CSR0); + udelay(100); + + if (tulip_debug > 1) + printk(KERN_DEBUG "%s: tulip_up(), irq==%d.\n", dev->name, dev->irq); + + iowrite32(tp->rx_ring_dma, ioaddr + CSR3); + iowrite32(tp->tx_ring_dma, ioaddr + CSR4); + tp->cur_rx = tp->cur_tx = 0; + tp->dirty_rx = tp->dirty_tx = 0; + + if (tp->flags & MC_HASH_ONLY) { + u32 addr_low = le32_to_cpu(get_unaligned((u32 *)dev->dev_addr)); + u32 addr_high = le16_to_cpu(get_unaligned((u16 *)(dev->dev_addr+4))); + if (tp->chip_id == AX88140) { + iowrite32(0, ioaddr + CSR13); + iowrite32(addr_low, ioaddr + CSR14); + iowrite32(1, ioaddr + CSR13); + iowrite32(addr_high, ioaddr + CSR14); + } else if (tp->flags & COMET_MAC_ADDR) { + iowrite32(addr_low, ioaddr + 0xA4); + iowrite32(addr_high, ioaddr + 0xA8); + iowrite32(0, ioaddr + 0xAC); + iowrite32(0, ioaddr + 0xB0); + } + } else { + /* This is set_rx_mode(), but without starting the transmitter. */ + u16 *eaddrs = (u16 *)dev->dev_addr; + u16 *setup_frm = &tp->setup_frame[15*6]; + dma_addr_t mapping; + + /* 21140 bug: you must add the broadcast address. */ + memset(tp->setup_frame, 0xff, sizeof(tp->setup_frame)); + /* Fill the final entry of the table with our physical address. */ + *setup_frm++ = eaddrs[0]; *setup_frm++ = eaddrs[0]; + *setup_frm++ = eaddrs[1]; *setup_frm++ = eaddrs[1]; + *setup_frm++ = eaddrs[2]; *setup_frm++ = eaddrs[2]; + + mapping = pci_map_single(tp->pdev, tp->setup_frame, + sizeof(tp->setup_frame), + PCI_DMA_TODEVICE); + tp->tx_buffers[tp->cur_tx].skb = NULL; + tp->tx_buffers[tp->cur_tx].mapping = mapping; + + /* Put the setup frame on the Tx list. */ + tp->tx_ring[tp->cur_tx].length = cpu_to_le32(0x08000000 | 192); + tp->tx_ring[tp->cur_tx].buffer1 = cpu_to_le32(mapping); + tp->tx_ring[tp->cur_tx].status = cpu_to_le32(DescOwned); + + tp->cur_tx++; + } + + tp->saved_if_port = dev->if_port; + if (dev->if_port == 0) + dev->if_port = tp->default_port; + + /* Allow selecting a default media. */ + i = 0; + if (tp->mtable == NULL) + goto media_picked; + if (dev->if_port) { + int looking_for = tulip_media_cap[dev->if_port] & MediaIsMII ? 11 : + (dev->if_port == 12 ? 0 : dev->if_port); + for (i = 0; i < tp->mtable->leafcount; i++) + if (tp->mtable->mleaf[i].media == looking_for) { + printk(KERN_INFO "%s: Using user-specified media %s.\n", + dev->name, medianame[dev->if_port]); + goto media_picked; + } + } + if ((tp->mtable->defaultmedia & 0x0800) == 0) { + int looking_for = tp->mtable->defaultmedia & MEDIA_MASK; + for (i = 0; i < tp->mtable->leafcount; i++) + if (tp->mtable->mleaf[i].media == looking_for) { + printk(KERN_INFO "%s: Using EEPROM-set media %s.\n", + dev->name, medianame[looking_for]); + goto media_picked; + } + } + /* Start sensing first non-full-duplex media. */ + for (i = tp->mtable->leafcount - 1; + (tulip_media_cap[tp->mtable->mleaf[i].media] & MediaAlwaysFD) && i > 0; i--) + ; +media_picked: + + tp->csr6 = 0; + tp->cur_index = i; + tp->nwayset = 0; + + if (dev->if_port) { + if (tp->chip_id == DC21143 && + (tulip_media_cap[dev->if_port] & MediaIsMII)) { + /* We must reset the media CSRs when we force-select MII mode. */ + iowrite32(0x0000, ioaddr + CSR13); + iowrite32(0x0000, ioaddr + CSR14); + iowrite32(0x0008, ioaddr + CSR15); + } + tulip_select_media(dev, 1); + } else if (tp->chip_id == DC21142) { + if (tp->mii_cnt) { + tulip_select_media(dev, 1); + if (tulip_debug > 1) + printk(KERN_INFO "%s: Using MII transceiver %d, status " + "%4.4x.\n", + dev->name, tp->phys[0], tulip_mdio_read(dev, tp->phys[0], 1)); + iowrite32(csr6_mask_defstate, ioaddr + CSR6); + tp->csr6 = csr6_mask_hdcap; + dev->if_port = 11; + iowrite32(0x0000, ioaddr + CSR13); + iowrite32(0x0000, ioaddr + CSR14); + } else + t21142_start_nway(dev); + } else if (tp->chip_id == PNIC2) { + /* for initial startup advertise 10/100 Full and Half */ + tp->sym_advertise = 0x01E0; + /* enable autonegotiate end interrupt */ + iowrite32(ioread32(ioaddr+CSR5)| 0x00008010, ioaddr + CSR5); + iowrite32(ioread32(ioaddr+CSR7)| 0x00008010, ioaddr + CSR7); + pnic2_start_nway(dev); + } else if (tp->chip_id == LC82C168 && ! tp->medialock) { + if (tp->mii_cnt) { + dev->if_port = 11; + tp->csr6 = 0x814C0000 | (tp->full_duplex ? 0x0200 : 0); + iowrite32(0x0001, ioaddr + CSR15); + } else if (ioread32(ioaddr + CSR5) & TPLnkPass) + pnic_do_nway(dev); + else { + /* Start with 10mbps to do autonegotiation. */ + iowrite32(0x32, ioaddr + CSR12); + tp->csr6 = 0x00420000; + iowrite32(0x0001B078, ioaddr + 0xB8); + iowrite32(0x0201B078, ioaddr + 0xB8); + next_tick = 1*HZ; + } + } else if ((tp->chip_id == MX98713 || tp->chip_id == COMPEX9881) + && ! tp->medialock) { + dev->if_port = 0; + tp->csr6 = 0x01880000 | (tp->full_duplex ? 0x0200 : 0); + iowrite32(0x0f370000 | ioread16(ioaddr + 0x80), ioaddr + 0x80); + } else if (tp->chip_id == MX98715 || tp->chip_id == MX98725) { + /* Provided by BOLO, Macronix - 12/10/1998. */ + dev->if_port = 0; + tp->csr6 = 0x01a80200; + iowrite32(0x0f370000 | ioread16(ioaddr + 0x80), ioaddr + 0x80); + iowrite32(0x11000 | ioread16(ioaddr + 0xa0), ioaddr + 0xa0); + } else if (tp->chip_id == COMET || tp->chip_id == CONEXANT) { + /* Enable automatic Tx underrun recovery. */ + iowrite32(ioread32(ioaddr + 0x88) | 1, ioaddr + 0x88); + dev->if_port = tp->mii_cnt ? 11 : 0; + tp->csr6 = 0x00040000; + } else if (tp->chip_id == AX88140) { + tp->csr6 = tp->mii_cnt ? 0x00040100 : 0x00000100; + } else + tulip_select_media(dev, 1); + + /* Start the chip's Tx to process setup frame. */ + tulip_stop_rxtx(tp); + barrier(); + udelay(5); + iowrite32(tp->csr6 | TxOn, ioaddr + CSR6); + + /* Enable interrupts by setting the interrupt mask. */ + iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR5); + iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR7); + tulip_start_rxtx(tp); + iowrite32(0, ioaddr + CSR2); /* Rx poll demand */ + + if (tulip_debug > 2) { + printk(KERN_DEBUG "%s: Done tulip_up(), CSR0 %8.8x, CSR5 %8.8x CSR6 %8.8x.\n", + dev->name, ioread32(ioaddr + CSR0), ioread32(ioaddr + CSR5), + ioread32(ioaddr + CSR6)); + } + + /* Set the timer to switch to check for link beat and perhaps switch + to an alternate media type. */ + tp->timer.expires = RUN_AT(next_tick); + add_timer(&tp->timer); +#ifdef CONFIG_TULIP_NAPI + init_timer(&tp->oom_timer); + tp->oom_timer.data = (unsigned long)dev; + tp->oom_timer.function = oom_timer; +#endif +} + +static int +tulip_open(struct net_device *dev) +{ + int retval; + + if ((retval = request_irq(dev->irq, &tulip_interrupt, SA_SHIRQ, dev->name, dev))) + return retval; + + tulip_init_ring (dev); + + tulip_up (dev); + + netif_start_queue (dev); + + return 0; +} + + +static void tulip_tx_timeout(struct net_device *dev) +{ + struct tulip_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->base_addr; + unsigned long flags; + + spin_lock_irqsave (&tp->lock, flags); + + if (tulip_media_cap[dev->if_port] & MediaIsMII) { + /* Do nothing -- the media monitor should handle this. */ + if (tulip_debug > 1) + printk(KERN_WARNING "%s: Transmit timeout using MII device.\n", + dev->name); + } else if (tp->chip_id == DC21140 || tp->chip_id == DC21142 + || tp->chip_id == MX98713 || tp->chip_id == COMPEX9881 + || tp->chip_id == DM910X || tp->chip_id == ULI526X) { + printk(KERN_WARNING "%s: 21140 transmit timed out, status %8.8x, " + "SIA %8.8x %8.8x %8.8x %8.8x, resetting...\n", + dev->name, ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12), + ioread32(ioaddr + CSR13), ioread32(ioaddr + CSR14), ioread32(ioaddr + CSR15)); + if ( ! tp->medialock && tp->mtable) { + do + --tp->cur_index; + while (tp->cur_index >= 0 + && (tulip_media_cap[tp->mtable->mleaf[tp->cur_index].media] + & MediaIsFD)); + if (--tp->cur_index < 0) { + /* We start again, but should instead look for default. */ + tp->cur_index = tp->mtable->leafcount - 1; + } + tulip_select_media(dev, 0); + printk(KERN_WARNING "%s: transmit timed out, switching to %s " + "media.\n", dev->name, medianame[dev->if_port]); + } + } else if (tp->chip_id == PNIC2) { + printk(KERN_WARNING "%s: PNIC2 transmit timed out, status %8.8x, " + "CSR6/7 %8.8x / %8.8x CSR12 %8.8x, resetting...\n", + dev->name, (int)ioread32(ioaddr + CSR5), (int)ioread32(ioaddr + CSR6), + (int)ioread32(ioaddr + CSR7), (int)ioread32(ioaddr + CSR12)); + } else { + printk(KERN_WARNING "%s: Transmit timed out, status %8.8x, CSR12 " + "%8.8x, resetting...\n", + dev->name, ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12)); + dev->if_port = 0; + } + +#if defined(way_too_many_messages) + if (tulip_debug > 3) { + int i; + for (i = 0; i < RX_RING_SIZE; i++) { + u8 *buf = (u8 *)(tp->rx_ring[i].buffer1); + int j; + printk(KERN_DEBUG "%2d: %8.8x %8.8x %8.8x %8.8x " + "%2.2x %2.2x %2.2x.\n", + i, (unsigned int)tp->rx_ring[i].status, + (unsigned int)tp->rx_ring[i].length, + (unsigned int)tp->rx_ring[i].buffer1, + (unsigned int)tp->rx_ring[i].buffer2, + buf[0], buf[1], buf[2]); + for (j = 0; buf[j] != 0xee && j < 1600; j++) + if (j < 100) printk(" %2.2x", buf[j]); + printk(" j=%d.\n", j); + } + printk(KERN_DEBUG " Rx ring %8.8x: ", (int)tp->rx_ring); + for (i = 0; i < RX_RING_SIZE; i++) + printk(" %8.8x", (unsigned int)tp->rx_ring[i].status); + printk("\n" KERN_DEBUG " Tx ring %8.8x: ", (int)tp->tx_ring); + for (i = 0; i < TX_RING_SIZE; i++) + printk(" %8.8x", (unsigned int)tp->tx_ring[i].status); + printk("\n"); + } +#endif + + /* Stop and restart the chip's Tx processes . */ + + tulip_restart_rxtx(tp); + /* Trigger an immediate transmit demand. */ + iowrite32(0, ioaddr + CSR1); + + tp->stats.tx_errors++; + + spin_unlock_irqrestore (&tp->lock, flags); + dev->trans_start = jiffies; + netif_wake_queue (dev); +} + + +/* Initialize the Rx and Tx rings, along with various 'dev' bits. */ +static void tulip_init_ring(struct net_device *dev) +{ + struct tulip_private *tp = netdev_priv(dev); + int i; + + tp->susp_rx = 0; + tp->ttimer = 0; + tp->nir = 0; + + for (i = 0; i < RX_RING_SIZE; i++) { + tp->rx_ring[i].status = 0x00000000; + tp->rx_ring[i].length = cpu_to_le32(PKT_BUF_SZ); + tp->rx_ring[i].buffer2 = cpu_to_le32(tp->rx_ring_dma + sizeof(struct tulip_rx_desc) * (i + 1)); + tp->rx_buffers[i].skb = NULL; + tp->rx_buffers[i].mapping = 0; + } + /* Mark the last entry as wrapping the ring. */ + tp->rx_ring[i-1].length = cpu_to_le32(PKT_BUF_SZ | DESC_RING_WRAP); + tp->rx_ring[i-1].buffer2 = cpu_to_le32(tp->rx_ring_dma); + + for (i = 0; i < RX_RING_SIZE; i++) { + dma_addr_t mapping; + + /* Note the receive buffer must be longword aligned. + dev_alloc_skb() provides 16 byte alignment. But do *not* + use skb_reserve() to align the IP header! */ + struct sk_buff *skb = dev_alloc_skb(PKT_BUF_SZ); + tp->rx_buffers[i].skb = skb; + if (skb == NULL) + break; + mapping = pci_map_single(tp->pdev, skb->tail, + PKT_BUF_SZ, PCI_DMA_FROMDEVICE); + tp->rx_buffers[i].mapping = mapping; + skb->dev = dev; /* Mark as being used by this device. */ + tp->rx_ring[i].status = cpu_to_le32(DescOwned); /* Owned by Tulip chip */ + tp->rx_ring[i].buffer1 = cpu_to_le32(mapping); + } + tp->dirty_rx = (unsigned int)(i - RX_RING_SIZE); + + /* The Tx buffer descriptor is filled in as needed, but we + do need to clear the ownership bit. */ + for (i = 0; i < TX_RING_SIZE; i++) { + tp->tx_buffers[i].skb = NULL; + tp->tx_buffers[i].mapping = 0; + tp->tx_ring[i].status = 0x00000000; + tp->tx_ring[i].buffer2 = cpu_to_le32(tp->tx_ring_dma + sizeof(struct tulip_tx_desc) * (i + 1)); + } + tp->tx_ring[i-1].buffer2 = cpu_to_le32(tp->tx_ring_dma); +} + +static int +tulip_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct tulip_private *tp = netdev_priv(dev); + int entry; + u32 flag; + dma_addr_t mapping; + + spin_lock_irq(&tp->lock); + + /* Calculate the next Tx descriptor entry. */ + entry = tp->cur_tx % TX_RING_SIZE; + + tp->tx_buffers[entry].skb = skb; + mapping = pci_map_single(tp->pdev, skb->data, + skb->len, PCI_DMA_TODEVICE); + tp->tx_buffers[entry].mapping = mapping; + tp->tx_ring[entry].buffer1 = cpu_to_le32(mapping); + + if (tp->cur_tx - tp->dirty_tx < TX_RING_SIZE/2) {/* Typical path */ + flag = 0x60000000; /* No interrupt */ + } else if (tp->cur_tx - tp->dirty_tx == TX_RING_SIZE/2) { + flag = 0xe0000000; /* Tx-done intr. */ + } else if (tp->cur_tx - tp->dirty_tx < TX_RING_SIZE - 2) { + flag = 0x60000000; /* No Tx-done intr. */ + } else { /* Leave room for set_rx_mode() to fill entries. */ + flag = 0xe0000000; /* Tx-done intr. */ + netif_stop_queue(dev); + } + if (entry == TX_RING_SIZE-1) + flag = 0xe0000000 | DESC_RING_WRAP; + + tp->tx_ring[entry].length = cpu_to_le32(skb->len | flag); + /* if we were using Transmit Automatic Polling, we would need a + * wmb() here. */ + tp->tx_ring[entry].status = cpu_to_le32(DescOwned); + wmb(); + + tp->cur_tx++; + + /* Trigger an immediate transmit demand. */ + iowrite32(0, tp->base_addr + CSR1); + + spin_unlock_irq(&tp->lock); + + dev->trans_start = jiffies; + + return 0; +} + +static void tulip_clean_tx_ring(struct tulip_private *tp) +{ + unsigned int dirty_tx; + + for (dirty_tx = tp->dirty_tx ; tp->cur_tx - dirty_tx > 0; + dirty_tx++) { + int entry = dirty_tx % TX_RING_SIZE; + int status = le32_to_cpu(tp->tx_ring[entry].status); + + if (status < 0) { + tp->stats.tx_errors++; /* It wasn't Txed */ + tp->tx_ring[entry].status = 0; + } + + /* Check for Tx filter setup frames. */ + if (tp->tx_buffers[entry].skb == NULL) { + /* test because dummy frames not mapped */ + if (tp->tx_buffers[entry].mapping) + pci_unmap_single(tp->pdev, + tp->tx_buffers[entry].mapping, + sizeof(tp->setup_frame), + PCI_DMA_TODEVICE); + continue; + } + + pci_unmap_single(tp->pdev, tp->tx_buffers[entry].mapping, + tp->tx_buffers[entry].skb->len, + PCI_DMA_TODEVICE); + + /* Free the original skb. */ + dev_kfree_skb_irq(tp->tx_buffers[entry].skb); + tp->tx_buffers[entry].skb = NULL; + tp->tx_buffers[entry].mapping = 0; + } +} + +static void tulip_down (struct net_device *dev) +{ + struct tulip_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->base_addr; + unsigned long flags; + + del_timer_sync (&tp->timer); +#ifdef CONFIG_TULIP_NAPI + del_timer_sync (&tp->oom_timer); +#endif + spin_lock_irqsave (&tp->lock, flags); + + /* Disable interrupts by clearing the interrupt mask. */ + iowrite32 (0x00000000, ioaddr + CSR7); + + /* Stop the Tx and Rx processes. */ + tulip_stop_rxtx(tp); + + /* prepare receive buffers */ + tulip_refill_rx(dev); + + /* release any unconsumed transmit buffers */ + tulip_clean_tx_ring(tp); + + if (ioread32 (ioaddr + CSR6) != 0xffffffff) + tp->stats.rx_missed_errors += ioread32 (ioaddr + CSR8) & 0xffff; + + spin_unlock_irqrestore (&tp->lock, flags); + + init_timer(&tp->timer); + tp->timer.data = (unsigned long)dev; + tp->timer.function = tulip_tbl[tp->chip_id].media_timer; + + dev->if_port = tp->saved_if_port; + + /* Leave the driver in snooze, not sleep, mode. */ + tulip_set_power_state (tp, 0, 1); +} + + +static int tulip_close (struct net_device *dev) +{ + struct tulip_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->base_addr; + int i; + + netif_stop_queue (dev); + + tulip_down (dev); + + if (tulip_debug > 1) + printk (KERN_DEBUG "%s: Shutting down ethercard, status was %2.2x.\n", + dev->name, ioread32 (ioaddr + CSR5)); + + free_irq (dev->irq, dev); + + /* Free all the skbuffs in the Rx queue. */ + for (i = 0; i < RX_RING_SIZE; i++) { + struct sk_buff *skb = tp->rx_buffers[i].skb; + dma_addr_t mapping = tp->rx_buffers[i].mapping; + + tp->rx_buffers[i].skb = NULL; + tp->rx_buffers[i].mapping = 0; + + tp->rx_ring[i].status = 0; /* Not owned by Tulip chip. */ + tp->rx_ring[i].length = 0; + tp->rx_ring[i].buffer1 = 0xBADF00D0; /* An invalid address. */ + if (skb) { + pci_unmap_single(tp->pdev, mapping, PKT_BUF_SZ, + PCI_DMA_FROMDEVICE); + dev_kfree_skb (skb); + } + } + for (i = 0; i < TX_RING_SIZE; i++) { + struct sk_buff *skb = tp->tx_buffers[i].skb; + + if (skb != NULL) { + pci_unmap_single(tp->pdev, tp->tx_buffers[i].mapping, + skb->len, PCI_DMA_TODEVICE); + dev_kfree_skb (skb); + } + tp->tx_buffers[i].skb = NULL; + tp->tx_buffers[i].mapping = 0; + } + + return 0; +} + +static struct net_device_stats *tulip_get_stats(struct net_device *dev) +{ + struct tulip_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->base_addr; + + if (netif_running(dev)) { + unsigned long flags; + + spin_lock_irqsave (&tp->lock, flags); + + tp->stats.rx_missed_errors += ioread32(ioaddr + CSR8) & 0xffff; + + spin_unlock_irqrestore(&tp->lock, flags); + } + + return &tp->stats; +} + + +static void tulip_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) +{ + struct tulip_private *np = netdev_priv(dev); + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); + strcpy(info->bus_info, pci_name(np->pdev)); +} + +static struct ethtool_ops ops = { + .get_drvinfo = tulip_get_drvinfo +}; + +/* Provide ioctl() calls to examine the MII xcvr state. */ +static int private_ioctl (struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct tulip_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->base_addr; + struct mii_ioctl_data *data = if_mii(rq); + const unsigned int phy_idx = 0; + int phy = tp->phys[phy_idx] & 0x1f; + unsigned int regnum = data->reg_num; + + switch (cmd) { + case SIOCGMIIPHY: /* Get address of MII PHY in use. */ + if (tp->mii_cnt) + data->phy_id = phy; + else if (tp->flags & HAS_NWAY) + data->phy_id = 32; + else if (tp->chip_id == COMET) + data->phy_id = 1; + else + return -ENODEV; + + case SIOCGMIIREG: /* Read MII PHY register. */ + if (data->phy_id == 32 && (tp->flags & HAS_NWAY)) { + int csr12 = ioread32 (ioaddr + CSR12); + int csr14 = ioread32 (ioaddr + CSR14); + switch (regnum) { + case 0: + if (((csr14<<5) & 0x1000) || + (dev->if_port == 5 && tp->nwayset)) + data->val_out = 0x1000; + else + data->val_out = (tulip_media_cap[dev->if_port]&MediaIs100 ? 0x2000 : 0) + | (tulip_media_cap[dev->if_port]&MediaIsFD ? 0x0100 : 0); + break; + case 1: + data->val_out = + 0x1848 + + ((csr12&0x7000) == 0x5000 ? 0x20 : 0) + + ((csr12&0x06) == 6 ? 0 : 4); + data->val_out |= 0x6048; + break; + case 4: + /* Advertised value, bogus 10baseTx-FD value from CSR6. */ + data->val_out = + ((ioread32(ioaddr + CSR6) >> 3) & 0x0040) + + ((csr14 >> 1) & 0x20) + 1; + data->val_out |= ((csr14 >> 9) & 0x03C0); + break; + case 5: data->val_out = tp->lpar; break; + default: data->val_out = 0; break; + } + } else { + data->val_out = tulip_mdio_read (dev, data->phy_id & 0x1f, regnum); + } + return 0; + + case SIOCSMIIREG: /* Write MII PHY register. */ + if (!capable (CAP_NET_ADMIN)) + return -EPERM; + if (regnum & ~0x1f) + return -EINVAL; + if (data->phy_id == phy) { + u16 value = data->val_in; + switch (regnum) { + case 0: /* Check for autonegotiation on or reset. */ + tp->full_duplex_lock = (value & 0x9000) ? 0 : 1; + if (tp->full_duplex_lock) + tp->full_duplex = (value & 0x0100) ? 1 : 0; + break; + case 4: + tp->advertising[phy_idx] = + tp->mii_advertise = data->val_in; + break; + } + } + if (data->phy_id == 32 && (tp->flags & HAS_NWAY)) { + u16 value = data->val_in; + if (regnum == 0) { + if ((value & 0x1200) == 0x1200) { + if (tp->chip_id == PNIC2) { + pnic2_start_nway (dev); + } else { + t21142_start_nway (dev); + } + } + } else if (regnum == 4) + tp->sym_advertise = value; + } else { + tulip_mdio_write (dev, data->phy_id & 0x1f, regnum, data->val_in); + } + return 0; + default: + return -EOPNOTSUPP; + } + + return -EOPNOTSUPP; +} + + +/* Set or clear the multicast filter for this adaptor. + Note that we only use exclusion around actually queueing the + new frame, not around filling tp->setup_frame. This is non-deterministic + when re-entered but still correct. */ + +#undef set_bit_le +#define set_bit_le(i,p) do { ((char *)(p))[(i)/8] |= (1<<((i)%8)); } while(0) + +static void build_setup_frame_hash(u16 *setup_frm, struct net_device *dev) +{ + struct tulip_private *tp = netdev_priv(dev); + u16 hash_table[32]; + struct dev_mc_list *mclist; + int i; + u16 *eaddrs; + + memset(hash_table, 0, sizeof(hash_table)); + set_bit_le(255, hash_table); /* Broadcast entry */ + /* This should work on big-endian machines as well. */ + for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; + i++, mclist = mclist->next) { + int index = ether_crc_le(ETH_ALEN, mclist->dmi_addr) & 0x1ff; + + set_bit_le(index, hash_table); + + } + for (i = 0; i < 32; i++) { + *setup_frm++ = hash_table[i]; + *setup_frm++ = hash_table[i]; + } + setup_frm = &tp->setup_frame[13*6]; + + /* Fill the final entry with our physical address. */ + eaddrs = (u16 *)dev->dev_addr; + *setup_frm++ = eaddrs[0]; *setup_frm++ = eaddrs[0]; + *setup_frm++ = eaddrs[1]; *setup_frm++ = eaddrs[1]; + *setup_frm++ = eaddrs[2]; *setup_frm++ = eaddrs[2]; +} + +static void build_setup_frame_perfect(u16 *setup_frm, struct net_device *dev) +{ + struct tulip_private *tp = netdev_priv(dev); + struct dev_mc_list *mclist; + int i; + u16 *eaddrs; + + /* We have <= 14 addresses so we can use the wonderful + 16 address perfect filtering of the Tulip. */ + for (i = 0, mclist = dev->mc_list; i < dev->mc_count; + i++, mclist = mclist->next) { + eaddrs = (u16 *)mclist->dmi_addr; + *setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++; + *setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++; + *setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++; + } + /* Fill the unused entries with the broadcast address. */ + memset(setup_frm, 0xff, (15-i)*12); + setup_frm = &tp->setup_frame[15*6]; + + /* Fill the final entry with our physical address. */ + eaddrs = (u16 *)dev->dev_addr; + *setup_frm++ = eaddrs[0]; *setup_frm++ = eaddrs[0]; + *setup_frm++ = eaddrs[1]; *setup_frm++ = eaddrs[1]; + *setup_frm++ = eaddrs[2]; *setup_frm++ = eaddrs[2]; +} + + +static void set_rx_mode(struct net_device *dev) +{ + struct tulip_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->base_addr; + int csr6; + + csr6 = ioread32(ioaddr + CSR6) & ~0x00D5; + + tp->csr6 &= ~0x00D5; + if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ + tp->csr6 |= AcceptAllMulticast | AcceptAllPhys; + csr6 |= AcceptAllMulticast | AcceptAllPhys; + /* Unconditionally log net taps. */ + printk(KERN_INFO "%s: Promiscuous mode enabled.\n", dev->name); + } else if ((dev->mc_count > 1000) || (dev->flags & IFF_ALLMULTI)) { + /* Too many to filter well -- accept all multicasts. */ + tp->csr6 |= AcceptAllMulticast; + csr6 |= AcceptAllMulticast; + } else if (tp->flags & MC_HASH_ONLY) { + /* Some work-alikes have only a 64-entry hash filter table. */ + /* Should verify correctness on big-endian/__powerpc__ */ + struct dev_mc_list *mclist; + int i; + if (dev->mc_count > 64) { /* Arbitrary non-effective limit. */ + tp->csr6 |= AcceptAllMulticast; + csr6 |= AcceptAllMulticast; + } else { + u32 mc_filter[2] = {0, 0}; /* Multicast hash filter */ + int filterbit; + for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; + i++, mclist = mclist->next) { + if (tp->flags & COMET_MAC_ADDR) + filterbit = ether_crc_le(ETH_ALEN, mclist->dmi_addr); + else + filterbit = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26; + filterbit &= 0x3f; + mc_filter[filterbit >> 5] |= 1 << (filterbit & 31); + if (tulip_debug > 2) { + printk(KERN_INFO "%s: Added filter for %2.2x:%2.2x:%2.2x:" + "%2.2x:%2.2x:%2.2x %8.8x bit %d.\n", dev->name, + mclist->dmi_addr[0], mclist->dmi_addr[1], + mclist->dmi_addr[2], mclist->dmi_addr[3], + mclist->dmi_addr[4], mclist->dmi_addr[5], + ether_crc(ETH_ALEN, mclist->dmi_addr), filterbit); + } + } + if (mc_filter[0] == tp->mc_filter[0] && + mc_filter[1] == tp->mc_filter[1]) + ; /* No change. */ + else if (tp->flags & IS_ASIX) { + iowrite32(2, ioaddr + CSR13); + iowrite32(mc_filter[0], ioaddr + CSR14); + iowrite32(3, ioaddr + CSR13); + iowrite32(mc_filter[1], ioaddr + CSR14); + } else if (tp->flags & COMET_MAC_ADDR) { + iowrite32(mc_filter[0], ioaddr + 0xAC); + iowrite32(mc_filter[1], ioaddr + 0xB0); + } + tp->mc_filter[0] = mc_filter[0]; + tp->mc_filter[1] = mc_filter[1]; + } + } else { + unsigned long flags; + u32 tx_flags = 0x08000000 | 192; + + /* Note that only the low-address shortword of setup_frame is valid! + The values are doubled for big-endian architectures. */ + if (dev->mc_count > 14) { /* Must use a multicast hash table. */ + build_setup_frame_hash(tp->setup_frame, dev); + tx_flags = 0x08400000 | 192; + } else { + build_setup_frame_perfect(tp->setup_frame, dev); + } + + spin_lock_irqsave(&tp->lock, flags); + + if (tp->cur_tx - tp->dirty_tx > TX_RING_SIZE - 2) { + /* Same setup recently queued, we need not add it. */ + } else { + unsigned int entry; + int dummy = -1; + + /* Now add this frame to the Tx list. */ + + entry = tp->cur_tx++ % TX_RING_SIZE; + + if (entry != 0) { + /* Avoid a chip errata by prefixing a dummy entry. Don't do + this on the ULI526X as it triggers a different problem */ + if (!(tp->chip_id == ULI526X && (tp->revision = 0x40 || tp->revision == 0x50))) { + tp->tx_buffers[entry].skb = NULL; + tp->tx_buffers[entry].mapping = 0; + tp->tx_ring[entry].length = + (entry == TX_RING_SIZE-1) ? cpu_to_le32(DESC_RING_WRAP) : 0; + tp->tx_ring[entry].buffer1 = 0; + /* Must set DescOwned later to avoid race with chip */ + dummy = entry; + entry = tp->cur_tx++ % TX_RING_SIZE; + } + } + + tp->tx_buffers[entry].skb = NULL; + tp->tx_buffers[entry].mapping = + pci_map_single(tp->pdev, tp->setup_frame, + sizeof(tp->setup_frame), + PCI_DMA_TODEVICE); + /* Put the setup frame on the Tx list. */ + if (entry == TX_RING_SIZE-1) + tx_flags |= DESC_RING_WRAP; /* Wrap ring. */ + tp->tx_ring[entry].length = cpu_to_le32(tx_flags); + tp->tx_ring[entry].buffer1 = + cpu_to_le32(tp->tx_buffers[entry].mapping); + tp->tx_ring[entry].status = cpu_to_le32(DescOwned); + if (dummy >= 0) + tp->tx_ring[dummy].status = cpu_to_le32(DescOwned); + if (tp->cur_tx - tp->dirty_tx >= TX_RING_SIZE - 2) + netif_stop_queue(dev); + + /* Trigger an immediate transmit demand. */ + iowrite32(0, ioaddr + CSR1); + } + + spin_unlock_irqrestore(&tp->lock, flags); + } + + iowrite32(csr6, ioaddr + CSR6); +} + +#ifdef CONFIG_TULIP_MWI +static void __devinit tulip_mwi_config (struct pci_dev *pdev, + struct net_device *dev) +{ + struct tulip_private *tp = netdev_priv(dev); + u8 cache; + u16 pci_command; + u32 csr0; + + if (tulip_debug > 3) + printk(KERN_DEBUG "%s: tulip_mwi_config()\n", pci_name(pdev)); + + tp->csr0 = csr0 = 0; + + /* if we have any cache line size at all, we can do MRM */ + csr0 |= MRM; + + /* ...and barring hardware bugs, MWI */ + if (!(tp->chip_id == DC21143 && tp->revision == 65)) + csr0 |= MWI; + + /* set or disable MWI in the standard PCI command bit. + * Check for the case where mwi is desired but not available + */ + if (csr0 & MWI) pci_set_mwi(pdev); + else pci_clear_mwi(pdev); + + /* read result from hardware (in case bit refused to enable) */ + pci_read_config_word(pdev, PCI_COMMAND, &pci_command); + if ((csr0 & MWI) && (!(pci_command & PCI_COMMAND_INVALIDATE))) + csr0 &= ~MWI; + + /* if cache line size hardwired to zero, no MWI */ + pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cache); + if ((csr0 & MWI) && (cache == 0)) { + csr0 &= ~MWI; + pci_clear_mwi(pdev); + } + + /* assign per-cacheline-size cache alignment and + * burst length values + */ + switch (cache) { + case 8: + csr0 |= MRL | (1 << CALShift) | (16 << BurstLenShift); + break; + case 16: + csr0 |= MRL | (2 << CALShift) | (16 << BurstLenShift); + break; + case 32: + csr0 |= MRL | (3 << CALShift) | (32 << BurstLenShift); + break; + default: + cache = 0; + break; + } + + /* if we have a good cache line size, we by now have a good + * csr0, so save it and exit + */ + if (cache) + goto out; + + /* we don't have a good csr0 or cache line size, disable MWI */ + if (csr0 & MWI) { + pci_clear_mwi(pdev); + csr0 &= ~MWI; + } + + /* sane defaults for burst length and cache alignment + * originally from de4x5 driver + */ + csr0 |= (8 << BurstLenShift) | (1 << CALShift); + +out: + tp->csr0 = csr0; + if (tulip_debug > 2) + printk(KERN_DEBUG "%s: MWI config cacheline=%d, csr0=%08x\n", + pci_name(pdev), cache, csr0); +} +#endif + +/* + * Chips that have the MRM/reserved bit quirk and the burst quirk. That + * is the DM910X and the on chip ULi devices + */ + +static int tulip_uli_dm_quirk(struct pci_dev *pdev) +{ + if (pdev->vendor == 0x1282 && pdev->device == 0x9102) + return 1; + if (pdev->vendor == 0x10b9 && pdev->device == 0x5261) + return 1; + if (pdev->vendor == 0x10b9 && pdev->device == 0x5263) + return 1; + return 0; +} + +static int __devinit tulip_init_one (struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct tulip_private *tp; + /* See note below on the multiport cards. */ + static unsigned char last_phys_addr[6] = {0x00, 'L', 'i', 'n', 'u', 'x'}; + static struct pci_device_id early_486_chipsets[] = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82424) }, + { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496) }, + { }, + }; + static int last_irq; + static int multiport_cnt; /* For four-port boards w/one EEPROM */ + u8 chip_rev; + int i, irq; + unsigned short sum; + unsigned char *ee_data; + struct net_device *dev; + void __iomem *ioaddr; + static int board_idx = -1; + int chip_idx = ent->driver_data; + const char *chip_name = tulip_tbl[chip_idx].chip_name; + unsigned int eeprom_missing = 0; + unsigned int force_csr0 = 0; + +#ifndef MODULE + static int did_version; /* Already printed version info. */ + if (tulip_debug > 0 && did_version++ == 0) + printk (KERN_INFO "%s", version); +#endif + + board_idx++; + + /* + * Lan media wire a tulip chip to a wan interface. Needs a very + * different driver (lmc driver) + */ + + if (pdev->subsystem_vendor == PCI_VENDOR_ID_LMC) { + printk (KERN_ERR PFX "skipping LMC card.\n"); + return -ENODEV; + } + + /* + * Early DM9100's need software CRC and the DMFE driver + */ + + if (pdev->vendor == 0x1282 && pdev->device == 0x9100) + { + u32 dev_rev; + /* Read Chip revision */ + pci_read_config_dword(pdev, PCI_REVISION_ID, &dev_rev); + if(dev_rev < 0x02000030) + { + printk(KERN_ERR PFX "skipping early DM9100 with Crc bug (use dmfe)\n"); + return -ENODEV; + } + } + + /* + * Looks for early PCI chipsets where people report hangs + * without the workarounds being on. + */ + + /* 1. Intel Saturn. Switch to 8 long words burst, 8 long word cache + aligned. Aries might need this too. The Saturn errata are not + pretty reading but thankfully it's an old 486 chipset. + + 2. The dreaded SiS496 486 chipset. Same workaround as Intel + Saturn. + */ + + if (pci_dev_present(early_486_chipsets)) { + csr0 = MRL | MRM | (8 << BurstLenShift) | (1 << CALShift); + force_csr0 = 1; + } + + /* bugfix: the ASIX must have a burst limit or horrible things happen. */ + if (chip_idx == AX88140) { + if ((csr0 & 0x3f00) == 0) + csr0 |= 0x2000; + } + + /* PNIC doesn't have MWI/MRL/MRM... */ + if (chip_idx == LC82C168) + csr0 &= ~0xfff10000; /* zero reserved bits 31:20, 16 */ + + /* DM9102A has troubles with MRM & clear reserved bits 24:22, 20, 16, 7:1 */ + if (tulip_uli_dm_quirk(pdev)) { + csr0 &= ~0x01f100ff; +#if defined(__sparc__) + csr0 = (csr0 & ~0xff00) | 0xe000; +#endif + } + /* + * And back to business + */ + + i = pci_enable_device(pdev); + if (i) { + printk (KERN_ERR PFX + "Cannot enable tulip board #%d, aborting\n", + board_idx); + return i; + } + + irq = pdev->irq; + + /* alloc_etherdev ensures aligned and zeroed private structures */ + dev = alloc_etherdev (sizeof (*tp)); + if (!dev) { + printk (KERN_ERR PFX "ether device alloc failed, aborting\n"); + return -ENOMEM; + } + + SET_MODULE_OWNER(dev); + SET_NETDEV_DEV(dev, &pdev->dev); + if (pci_resource_len (pdev, 0) < tulip_tbl[chip_idx].io_size) { + printk (KERN_ERR PFX "%s: I/O region (0x%lx@0x%lx) too small, " + "aborting\n", pci_name(pdev), + pci_resource_len (pdev, 0), + pci_resource_start (pdev, 0)); + goto err_out_free_netdev; + } + + /* grab all resources from both PIO and MMIO regions, as we + * don't want anyone else messing around with our hardware */ + if (pci_request_regions (pdev, "tulip")) + goto err_out_free_netdev; + +#ifndef USE_IO_OPS + ioaddr = pci_iomap(pdev, 1, tulip_tbl[chip_idx].io_size); +#else + ioaddr = pci_iomap(pdev, 0, tulip_tbl[chip_idx].io_size); +#endif + if (!ioaddr) + goto err_out_free_res; + + pci_read_config_byte (pdev, PCI_REVISION_ID, &chip_rev); + + /* + * initialize private data structure 'tp' + * it is zeroed and aligned in alloc_etherdev + */ + tp = netdev_priv(dev); + + tp->rx_ring = pci_alloc_consistent(pdev, + sizeof(struct tulip_rx_desc) * RX_RING_SIZE + + sizeof(struct tulip_tx_desc) * TX_RING_SIZE, + &tp->rx_ring_dma); + if (!tp->rx_ring) + goto err_out_mtable; + tp->tx_ring = (struct tulip_tx_desc *)(tp->rx_ring + RX_RING_SIZE); + tp->tx_ring_dma = tp->rx_ring_dma + sizeof(struct tulip_rx_desc) * RX_RING_SIZE; + + tp->chip_id = chip_idx; + tp->flags = tulip_tbl[chip_idx].flags; + tp->pdev = pdev; + tp->base_addr = ioaddr; + tp->revision = chip_rev; + tp->csr0 = csr0; + spin_lock_init(&tp->lock); + spin_lock_init(&tp->mii_lock); + init_timer(&tp->timer); + tp->timer.data = (unsigned long)dev; + tp->timer.function = tulip_tbl[tp->chip_id].media_timer; + + dev->base_addr = (unsigned long)ioaddr; + +#ifdef CONFIG_TULIP_MWI + if (!force_csr0 && (tp->flags & HAS_PCI_MWI)) + tulip_mwi_config (pdev, dev); +#else + /* MWI is broken for DC21143 rev 65... */ + if (chip_idx == DC21143 && chip_rev == 65) + tp->csr0 &= ~MWI; +#endif + + /* Stop the chip's Tx and Rx processes. */ + tulip_stop_rxtx(tp); + + pci_set_master(pdev); + +#ifdef CONFIG_GSC + if (pdev->subsystem_vendor == PCI_VENDOR_ID_HP) { + switch (pdev->subsystem_device) { + default: + break; + case 0x1061: + case 0x1062: + case 0x1063: + case 0x1098: + case 0x1099: + case 0x10EE: + tp->flags |= HAS_SWAPPED_SEEPROM | NEEDS_FAKE_MEDIA_TABLE; + chip_name = "GSC DS21140 Tulip"; + } + } +#endif + + /* Clear the missed-packet counter. */ + ioread32(ioaddr + CSR8); + + /* The station address ROM is read byte serially. The register must + be polled, waiting for the value to be read bit serially from the + EEPROM. + */ + ee_data = tp->eeprom; + sum = 0; + if (chip_idx == LC82C168) { + for (i = 0; i < 3; i++) { + int value, boguscnt = 100000; + iowrite32(0x600 | i, ioaddr + 0x98); + do + value = ioread32(ioaddr + CSR9); + while (value < 0 && --boguscnt > 0); + put_unaligned(le16_to_cpu(value), ((u16*)dev->dev_addr) + i); + sum += value & 0xffff; + } + } else if (chip_idx == COMET) { + /* No need to read the EEPROM. */ + put_unaligned(cpu_to_le32(ioread32(ioaddr + 0xA4)), (u32 *)dev->dev_addr); + put_unaligned(cpu_to_le16(ioread32(ioaddr + 0xA8)), (u16 *)(dev->dev_addr + 4)); + for (i = 0; i < 6; i ++) + sum += dev->dev_addr[i]; + } else { + /* A serial EEPROM interface, we read now and sort it out later. */ + int sa_offset = 0; + int ee_addr_size = tulip_read_eeprom(dev, 0xff, 8) & 0x40000 ? 8 : 6; + + for (i = 0; i < sizeof(tp->eeprom); i+=2) { + u16 data = tulip_read_eeprom(dev, i/2, ee_addr_size); + ee_data[i] = data & 0xff; + ee_data[i + 1] = data >> 8; + } + + /* DEC now has a specification (see Notes) but early board makers + just put the address in the first EEPROM locations. */ + /* This does memcmp(ee_data, ee_data+16, 8) */ + for (i = 0; i < 8; i ++) + if (ee_data[i] != ee_data[16+i]) + sa_offset = 20; + if (chip_idx == CONEXANT) { + /* Check that the tuple type and length is correct. */ + if (ee_data[0x198] == 0x04 && ee_data[0x199] == 6) + sa_offset = 0x19A; + } else if (ee_data[0] == 0xff && ee_data[1] == 0xff && + ee_data[2] == 0) { + sa_offset = 2; /* Grrr, damn Matrox boards. */ + multiport_cnt = 4; + } +#ifdef CONFIG_DDB5476 + if ((pdev->bus->number == 0) && (PCI_SLOT(pdev->devfn) == 6)) { + /* DDB5476 MAC address in first EEPROM locations. */ + sa_offset = 0; + /* No media table either */ + tp->flags &= ~HAS_MEDIA_TABLE; + } +#endif +#ifdef CONFIG_DDB5477 + if ((pdev->bus->number == 0) && (PCI_SLOT(pdev->devfn) == 4)) { + /* DDB5477 MAC address in first EEPROM locations. */ + sa_offset = 0; + /* No media table either */ + tp->flags &= ~HAS_MEDIA_TABLE; + } +#endif +#ifdef CONFIG_MIPS_COBALT + if ((pdev->bus->number == 0) && + ((PCI_SLOT(pdev->devfn) == 7) || + (PCI_SLOT(pdev->devfn) == 12))) { + /* Cobalt MAC address in first EEPROM locations. */ + sa_offset = 0; + /* No media table either */ + tp->flags &= ~HAS_MEDIA_TABLE; + } +#endif +#ifdef CONFIG_GSC + /* Check to see if we have a broken srom */ + if (ee_data[0] == 0x61 && ee_data[1] == 0x10) { + /* pci_vendor_id and subsystem_id are swapped */ + ee_data[0] = ee_data[2]; + ee_data[1] = ee_data[3]; + ee_data[2] = 0x61; + ee_data[3] = 0x10; + + /* HSC-PCI boards need to be byte-swaped and shifted + * up 1 word. This shift needs to happen at the end + * of the MAC first because of the 2 byte overlap. + */ + for (i = 4; i >= 0; i -= 2) { + ee_data[17 + i + 3] = ee_data[17 + i]; + ee_data[16 + i + 5] = ee_data[16 + i]; + } + } +#endif + + for (i = 0; i < 6; i ++) { + dev->dev_addr[i] = ee_data[i + sa_offset]; + sum += ee_data[i + sa_offset]; + } + } + /* Lite-On boards have the address byte-swapped. */ + if ((dev->dev_addr[0] == 0xA0 || dev->dev_addr[0] == 0xC0 || dev->dev_addr[0] == 0x02) + && dev->dev_addr[1] == 0x00) + for (i = 0; i < 6; i+=2) { + char tmp = dev->dev_addr[i]; + dev->dev_addr[i] = dev->dev_addr[i+1]; + dev->dev_addr[i+1] = tmp; + } + /* On the Zynx 315 Etherarray and other multiport boards only the + first Tulip has an EEPROM. + On Sparc systems the mac address is held in the OBP property + "local-mac-address". + The addresses of the subsequent ports are derived from the first. + Many PCI BIOSes also incorrectly report the IRQ line, so we correct + that here as well. */ + if (sum == 0 || sum == 6*0xff) { +#if defined(__sparc__) + struct pcidev_cookie *pcp = pdev->sysdata; +#endif + eeprom_missing = 1; + for (i = 0; i < 5; i++) + dev->dev_addr[i] = last_phys_addr[i]; + dev->dev_addr[i] = last_phys_addr[i] + 1; +#if defined(__sparc__) + if ((pcp != NULL) && prom_getproplen(pcp->prom_node, + "local-mac-address") == 6) { + prom_getproperty(pcp->prom_node, "local-mac-address", + dev->dev_addr, 6); + } +#endif +#if defined(__i386__) /* Patch up x86 BIOS bug. */ + if (last_irq) + irq = last_irq; +#endif + } + + for (i = 0; i < 6; i++) + last_phys_addr[i] = dev->dev_addr[i]; + last_irq = irq; + dev->irq = irq; + + /* The lower four bits are the media type. */ + if (board_idx >= 0 && board_idx < MAX_UNITS) { + if (options[board_idx] & MEDIA_MASK) + tp->default_port = options[board_idx] & MEDIA_MASK; + if ((options[board_idx] & FullDuplex) || full_duplex[board_idx] > 0) + tp->full_duplex = 1; + if (mtu[board_idx] > 0) + dev->mtu = mtu[board_idx]; + } + if (dev->mem_start & MEDIA_MASK) + tp->default_port = dev->mem_start & MEDIA_MASK; + if (tp->default_port) { + printk(KERN_INFO "tulip%d: Transceiver selection forced to %s.\n", + board_idx, medianame[tp->default_port & MEDIA_MASK]); + tp->medialock = 1; + if (tulip_media_cap[tp->default_port] & MediaAlwaysFD) + tp->full_duplex = 1; + } + if (tp->full_duplex) + tp->full_duplex_lock = 1; + + if (tulip_media_cap[tp->default_port] & MediaIsMII) { + u16 media2advert[] = { 0x20, 0x40, 0x03e0, 0x60, 0x80, 0x100, 0x200 }; + tp->mii_advertise = media2advert[tp->default_port - 9]; + tp->mii_advertise |= (tp->flags & HAS_8023X); /* Matching bits! */ + } + + if (tp->flags & HAS_MEDIA_TABLE) { + sprintf(dev->name, "tulip%d", board_idx); /* hack */ + tulip_parse_eeprom(dev); + strcpy(dev->name, "eth%d"); /* un-hack */ + } + + if ((tp->flags & ALWAYS_CHECK_MII) || + (tp->mtable && tp->mtable->has_mii) || + ( ! tp->mtable && (tp->flags & HAS_MII))) { + if (tp->mtable && tp->mtable->has_mii) { + for (i = 0; i < tp->mtable->leafcount; i++) + if (tp->mtable->mleaf[i].media == 11) { + tp->cur_index = i; + tp->saved_if_port = dev->if_port; + tulip_select_media(dev, 2); + dev->if_port = tp->saved_if_port; + break; + } + } + + /* Find the connected MII xcvrs. + Doing this in open() would allow detecting external xcvrs + later, but takes much time. */ + tulip_find_mii (dev, board_idx); + } + + /* The Tulip-specific entries in the device structure. */ + dev->open = tulip_open; + dev->hard_start_xmit = tulip_start_xmit; + dev->tx_timeout = tulip_tx_timeout; + dev->watchdog_timeo = TX_TIMEOUT; +#ifdef CONFIG_TULIP_NAPI + dev->poll = tulip_poll; + dev->weight = 16; +#endif + dev->stop = tulip_close; + dev->get_stats = tulip_get_stats; + dev->do_ioctl = private_ioctl; + dev->set_multicast_list = set_rx_mode; +#ifdef CONFIG_NET_POLL_CONTROLLER + dev->poll_controller = &poll_tulip; +#endif + SET_ETHTOOL_OPS(dev, &ops); + + if (register_netdev(dev)) + goto err_out_free_ring; + + printk(KERN_INFO "%s: %s rev %d at %p,", + dev->name, chip_name, chip_rev, ioaddr); + pci_set_drvdata(pdev, dev); + + if (eeprom_missing) + printk(" EEPROM not present,"); + for (i = 0; i < 6; i++) + printk("%c%2.2X", i ? ':' : ' ', dev->dev_addr[i]); + printk(", IRQ %d.\n", irq); + + if (tp->chip_id == PNIC2) + tp->link_change = pnic2_lnk_change; + else if (tp->flags & HAS_NWAY) + tp->link_change = t21142_lnk_change; + else if (tp->flags & HAS_PNICNWAY) + tp->link_change = pnic_lnk_change; + + /* Reset the xcvr interface and turn on heartbeat. */ + switch (chip_idx) { + case DC21140: + case DM910X: + case ULI526X: + default: + if (tp->mtable) + iowrite32(tp->mtable->csr12dir | 0x100, ioaddr + CSR12); + break; + case DC21142: + if (tp->mii_cnt || tulip_media_cap[dev->if_port] & MediaIsMII) { + iowrite32(csr6_mask_defstate, ioaddr + CSR6); + iowrite32(0x0000, ioaddr + CSR13); + iowrite32(0x0000, ioaddr + CSR14); + iowrite32(csr6_mask_hdcap, ioaddr + CSR6); + } else + t21142_start_nway(dev); + break; + case PNIC2: + /* just do a reset for sanity sake */ + iowrite32(0x0000, ioaddr + CSR13); + iowrite32(0x0000, ioaddr + CSR14); + break; + case LC82C168: + if ( ! tp->mii_cnt) { + tp->nway = 1; + tp->nwayset = 0; + iowrite32(csr6_ttm | csr6_ca, ioaddr + CSR6); + iowrite32(0x30, ioaddr + CSR12); + iowrite32(0x0001F078, ioaddr + CSR6); + iowrite32(0x0201F078, ioaddr + CSR6); /* Turn on autonegotiation. */ + } + break; + case MX98713: + case COMPEX9881: + iowrite32(0x00000000, ioaddr + CSR6); + iowrite32(0x000711C0, ioaddr + CSR14); /* Turn on NWay. */ + iowrite32(0x00000001, ioaddr + CSR13); + break; + case MX98715: + case MX98725: + iowrite32(0x01a80000, ioaddr + CSR6); + iowrite32(0xFFFFFFFF, ioaddr + CSR14); + iowrite32(0x00001000, ioaddr + CSR12); + break; + case COMET: + /* No initialization necessary. */ + break; + } + + /* put the chip in snooze mode until opened */ + tulip_set_power_state (tp, 0, 1); + + return 0; + +err_out_free_ring: + pci_free_consistent (pdev, + sizeof (struct tulip_rx_desc) * RX_RING_SIZE + + sizeof (struct tulip_tx_desc) * TX_RING_SIZE, + tp->rx_ring, tp->rx_ring_dma); + +err_out_mtable: + if (tp->mtable) + kfree (tp->mtable); + pci_iounmap(pdev, ioaddr); + +err_out_free_res: + pci_release_regions (pdev); + +err_out_free_netdev: + free_netdev (dev); + return -ENODEV; +} + + +#ifdef CONFIG_PM + +static int tulip_suspend (struct pci_dev *pdev, pm_message_t state) +{ + struct net_device *dev = pci_get_drvdata(pdev); + + if (dev && netif_running (dev) && netif_device_present (dev)) { + netif_device_detach (dev); + tulip_down (dev); + /* pci_power_off(pdev, -1); */ + } + return 0; +} + + +static int tulip_resume(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + + if (dev && netif_running (dev) && !netif_device_present (dev)) { +#if 1 + pci_enable_device (pdev); +#endif + /* pci_power_on(pdev); */ + tulip_up (dev); + netif_device_attach (dev); + } + return 0; +} + +#endif /* CONFIG_PM */ + + +static void __devexit tulip_remove_one (struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata (pdev); + struct tulip_private *tp; + + if (!dev) + return; + + tp = netdev_priv(dev); + unregister_netdev(dev); + pci_free_consistent (pdev, + sizeof (struct tulip_rx_desc) * RX_RING_SIZE + + sizeof (struct tulip_tx_desc) * TX_RING_SIZE, + tp->rx_ring, tp->rx_ring_dma); + if (tp->mtable) + kfree (tp->mtable); + pci_iounmap(pdev, tp->base_addr); + free_netdev (dev); + pci_release_regions (pdev); + pci_set_drvdata (pdev, NULL); + + /* pci_power_off (pdev, -1); */ +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +/* + * Polling 'interrupt' - used by things like netconsole to send skbs + * without having to re-enable interrupts. It's not called while + * the interrupt routine is executing. + */ + +static void poll_tulip (struct net_device *dev) +{ + /* disable_irq here is not very nice, but with the lockless + interrupt handler we have no other choice. */ + disable_irq(dev->irq); + tulip_interrupt (dev->irq, dev, NULL); + enable_irq(dev->irq); +} +#endif + +static struct pci_driver tulip_driver = { + .name = DRV_NAME, + .id_table = tulip_pci_tbl, + .probe = tulip_init_one, + .remove = __devexit_p(tulip_remove_one), +#ifdef CONFIG_PM + .suspend = tulip_suspend, + .resume = tulip_resume, +#endif /* CONFIG_PM */ +}; + + +static int __init tulip_init (void) +{ +#ifdef MODULE + printk (KERN_INFO "%s", version); +#endif + + /* copy module parms into globals */ + tulip_rx_copybreak = rx_copybreak; + tulip_max_interrupt_work = max_interrupt_work; + + /* probe for and init boards */ + return pci_module_init (&tulip_driver); +} + + +static void __exit tulip_cleanup (void) +{ + pci_unregister_driver (&tulip_driver); +} + + +module_init(tulip_init); +module_exit(tulip_cleanup); -- cgit v1.2.3